From 84dba255334bd2d4f822579b1480a0cf90f42015 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Wed, 15 Sep 2021 23:18:58 +0100 Subject: [PATCH 001/595] Make ChibiOS PAL interactions less STM32 specific - Round 2 (#14456) --- platforms/chibios/drivers/i2c_master.c | 4 ++-- platforms/chibios/drivers/serial_usart.c | 6 +++--- platforms/chibios/drivers/spi_master.c | 6 +++--- platforms/chibios/drivers/uart.c | 4 ++-- platforms/chibios/drivers/ws2812_pwm.c | 4 ++-- platforms/chibios/drivers/ws2812_spi.c | 6 +++--- tmk_core/common/chibios/chibios_config.h | 2 ++ 7 files changed, 17 insertions(+), 15 deletions(-) diff --git a/platforms/chibios/drivers/i2c_master.c b/platforms/chibios/drivers/i2c_master.c index 471901c2be..981f6fa06d 100644 --- a/platforms/chibios/drivers/i2c_master.c +++ b/platforms/chibios/drivers/i2c_master.c @@ -71,8 +71,8 @@ __attribute__((weak)) void i2c_init(void) { palSetLineMode(I2C1_SCL_PIN, I2C1_SCL_PAL_MODE); palSetLineMode(I2C1_SDA_PIN, I2C1_SDA_PAL_MODE); #else - palSetLineMode(I2C1_SCL_PIN, PAL_MODE_ALTERNATE(I2C1_SCL_PAL_MODE) | PAL_MODE_OUTPUT_OPENDRAIN); - palSetLineMode(I2C1_SDA_PIN, PAL_MODE_ALTERNATE(I2C1_SDA_PAL_MODE) | PAL_MODE_OUTPUT_OPENDRAIN); + palSetLineMode(I2C1_SCL_PIN, PAL_MODE_ALTERNATE(I2C1_SCL_PAL_MODE) | PAL_OUTPUT_TYPE_OPENDRAIN); + palSetLineMode(I2C1_SDA_PIN, PAL_MODE_ALTERNATE(I2C1_SDA_PAL_MODE) | PAL_OUTPUT_TYPE_OPENDRAIN); #endif } } diff --git a/platforms/chibios/drivers/serial_usart.c b/platforms/chibios/drivers/serial_usart.c index c05003b12e..124e4be685 100644 --- a/platforms/chibios/drivers/serial_usart.c +++ b/platforms/chibios/drivers/serial_usart.c @@ -106,7 +106,7 @@ __attribute__((weak)) void usart_init(void) { # if defined(USE_GPIOV1) palSetLineMode(SERIAL_USART_TX_PIN, PAL_MODE_ALTERNATE_OPENDRAIN); # else - palSetLineMode(SERIAL_USART_TX_PIN, PAL_MODE_ALTERNATE(SERIAL_USART_TX_PAL_MODE) | PAL_MODE_OUTPUT_OPENDRAIN); + palSetLineMode(SERIAL_USART_TX_PIN, PAL_MODE_ALTERNATE(SERIAL_USART_TX_PAL_MODE) | PAL_OUTPUT_TYPE_OPENDRAIN); # endif # if defined(USART_REMAP) @@ -128,8 +128,8 @@ __attribute__((weak)) void usart_init(void) { palSetLineMode(SERIAL_USART_TX_PIN, PAL_MODE_ALTERNATE_PUSHPULL); palSetLineMode(SERIAL_USART_RX_PIN, PAL_MODE_INPUT); # else - palSetLineMode(SERIAL_USART_TX_PIN, PAL_MODE_ALTERNATE(SERIAL_USART_TX_PAL_MODE) | PAL_MODE_OUTPUT_PUSHPULL | PAL_OUTPUT_SPEED_HIGHEST); - palSetLineMode(SERIAL_USART_RX_PIN, PAL_MODE_ALTERNATE(SERIAL_USART_RX_PAL_MODE) | PAL_MODE_OUTPUT_PUSHPULL | PAL_OUTPUT_SPEED_HIGHEST); + palSetLineMode(SERIAL_USART_TX_PIN, PAL_MODE_ALTERNATE(SERIAL_USART_TX_PAL_MODE) | PAL_OUTPUT_TYPE_PUSHPULL | PAL_OUTPUT_SPEED_HIGHEST); + palSetLineMode(SERIAL_USART_RX_PIN, PAL_MODE_ALTERNATE(SERIAL_USART_RX_PAL_MODE) | PAL_OUTPUT_TYPE_PUSHPULL | PAL_OUTPUT_SPEED_HIGHEST); # endif # if defined(USART_REMAP) diff --git a/platforms/chibios/drivers/spi_master.c b/platforms/chibios/drivers/spi_master.c index 6495dd6e69..f98db6db97 100644 --- a/platforms/chibios/drivers/spi_master.c +++ b/platforms/chibios/drivers/spi_master.c @@ -42,9 +42,9 @@ __attribute__((weak)) void spi_init(void) { palSetPadMode(PAL_PORT(SPI_MOSI_PIN), PAL_PAD(SPI_MOSI_PIN), SPI_MOSI_PAL_MODE); palSetPadMode(PAL_PORT(SPI_MISO_PIN), PAL_PAD(SPI_MISO_PIN), SPI_MISO_PAL_MODE); #else - palSetPadMode(PAL_PORT(SPI_SCK_PIN), PAL_PAD(SPI_SCK_PIN), PAL_MODE_ALTERNATE(SPI_SCK_PAL_MODE) | PAL_MODE_OUTPUT_PUSHPULL | PAL_OUTPUT_SPEED_HIGHEST); - palSetPadMode(PAL_PORT(SPI_MOSI_PIN), PAL_PAD(SPI_MOSI_PIN), PAL_MODE_ALTERNATE(SPI_MOSI_PAL_MODE) | PAL_MODE_OUTPUT_PUSHPULL | PAL_OUTPUT_SPEED_HIGHEST); - palSetPadMode(PAL_PORT(SPI_MISO_PIN), PAL_PAD(SPI_MISO_PIN), PAL_MODE_ALTERNATE(SPI_MISO_PAL_MODE) | PAL_MODE_OUTPUT_PUSHPULL | PAL_OUTPUT_SPEED_HIGHEST); + palSetPadMode(PAL_PORT(SPI_SCK_PIN), PAL_PAD(SPI_SCK_PIN), PAL_MODE_ALTERNATE(SPI_SCK_PAL_MODE) | PAL_OUTPUT_TYPE_PUSHPULL | PAL_OUTPUT_SPEED_HIGHEST); + palSetPadMode(PAL_PORT(SPI_MOSI_PIN), PAL_PAD(SPI_MOSI_PIN), PAL_MODE_ALTERNATE(SPI_MOSI_PAL_MODE) | PAL_OUTPUT_TYPE_PUSHPULL | PAL_OUTPUT_SPEED_HIGHEST); + palSetPadMode(PAL_PORT(SPI_MISO_PIN), PAL_PAD(SPI_MISO_PIN), PAL_MODE_ALTERNATE(SPI_MISO_PAL_MODE) | PAL_OUTPUT_TYPE_PUSHPULL | PAL_OUTPUT_SPEED_HIGHEST); #endif } } diff --git a/platforms/chibios/drivers/uart.c b/platforms/chibios/drivers/uart.c index 4744935da3..0e8e0515af 100644 --- a/platforms/chibios/drivers/uart.c +++ b/platforms/chibios/drivers/uart.c @@ -32,8 +32,8 @@ void uart_init(uint32_t baud) { palSetLineMode(SD1_TX_PIN, PAL_MODE_ALTERNATE_OPENDRAIN); palSetLineMode(SD1_RX_PIN, PAL_MODE_ALTERNATE_OPENDRAIN); #else - palSetLineMode(SD1_TX_PIN, PAL_MODE_ALTERNATE(SD1_TX_PAL_MODE) | PAL_MODE_OUTPUT_OPENDRAIN); - palSetLineMode(SD1_RX_PIN, PAL_MODE_ALTERNATE(SD1_RX_PAL_MODE) | PAL_MODE_OUTPUT_OPENDRAIN); + palSetLineMode(SD1_TX_PIN, PAL_MODE_ALTERNATE(SD1_TX_PAL_MODE) | PAL_OUTPUT_TYPE_OPENDRAIN); + palSetLineMode(SD1_RX_PIN, PAL_MODE_ALTERNATE(SD1_RX_PAL_MODE) | PAL_OUTPUT_TYPE_OPENDRAIN); #endif sdStart(&SERIAL_DRIVER, &serialConfig); } diff --git a/platforms/chibios/drivers/ws2812_pwm.c b/platforms/chibios/drivers/ws2812_pwm.c index 0a6f6e3e31..54eac7b5ae 100644 --- a/platforms/chibios/drivers/ws2812_pwm.c +++ b/platforms/chibios/drivers/ws2812_pwm.c @@ -42,13 +42,13 @@ # if defined(USE_GPIOV1) # define WS2812_OUTPUT_MODE PAL_MODE_ALTERNATE_PUSHPULL # else -# define WS2812_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_PWM_PAL_MODE) | PAL_MODE_OUTPUT_PUSHPULL | PAL_OUTPUT_SPEED_HIGHEST | PAL_PUPDR_FLOATING +# define WS2812_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_PWM_PAL_MODE) | PAL_OUTPUT_TYPE_PUSHPULL | PAL_OUTPUT_SPEED_HIGHEST | PAL_PUPDR_FLOATING # endif #else # if defined(USE_GPIOV1) # define WS2812_OUTPUT_MODE PAL_MODE_ALTERNATE_PUSHPULL # else -# define WS2812_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_PWM_PAL_MODE) | PAL_MODE_OUTPUT_OPENDRAIN | PAL_OUTPUT_SPEED_HIGHEST | PAL_PUPDR_FLOATING +# define WS2812_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_PWM_PAL_MODE) | PAL_OUTPUT_TYPE_OPENDRAIN | PAL_OUTPUT_SPEED_HIGHEST | PAL_PUPDR_FLOATING # endif #endif diff --git a/platforms/chibios/drivers/ws2812_spi.c b/platforms/chibios/drivers/ws2812_spi.c index fb0bd2386c..589bf85c35 100644 --- a/platforms/chibios/drivers/ws2812_spi.c +++ b/platforms/chibios/drivers/ws2812_spi.c @@ -26,13 +26,13 @@ # if defined(USE_GPIOV1) # define WS2812_MOSI_OUTPUT_MODE PAL_MODE_ALTERNATE_PUSHPULL # else -# define WS2812_MOSI_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_SPI_MOSI_PAL_MODE) | PAL_MODE_OUTPUT_PUSHPULL +# define WS2812_MOSI_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_SPI_MOSI_PAL_MODE) | PAL_OUTPUT_TYPE_PUSHPULL # endif #else # if defined(USE_GPIOV1) # define WS2812_MOSI_OUTPUT_MODE PAL_MODE_ALTERNATE_OPENDRAIN # else -# define WS2812_MOSI_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_SPI_MOSI_PAL_MODE) | PAL_MODE_OUTPUT_OPENDRAIN +# define WS2812_MOSI_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_SPI_MOSI_PAL_MODE) | PAL_OUTPUT_TYPE_OPENDRAIN # endif #endif @@ -70,7 +70,7 @@ #if defined(USE_GPIOV1) # define WS2812_SCK_OUTPUT_MODE PAL_MODE_ALTERNATE_PUSHPULL #else -# define WS2812_SCK_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_SPI_SCK_PAL_MODE) | PAL_MODE_OUTPUT_PUSHPULL +# define WS2812_SCK_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_SPI_SCK_PAL_MODE) | PAL_OUTPUT_TYPE_PUSHPULL #endif #define BYTES_FOR_LED_BYTE 4 diff --git a/tmk_core/common/chibios/chibios_config.h b/tmk_core/common/chibios/chibios_config.h index 6a57d889bb..c35f589557 100644 --- a/tmk_core/common/chibios/chibios_config.h +++ b/tmk_core/common/chibios/chibios_config.h @@ -28,6 +28,8 @@ # define PAL_MODE_ALTERNATE_OPENDRAIN PAL_MODE_STM32_ALTERNATE_OPENDRAIN # define PAL_MODE_ALTERNATE_PUSHPULL PAL_MODE_STM32_ALTERNATE_PUSHPULL # else +# define PAL_OUTPUT_TYPE_OPENDRAIN PAL_STM32_OTYPE_OPENDRAIN +# define PAL_OUTPUT_TYPE_PUSHPULL PAL_STM32_OTYPE_PUSHPULL # define PAL_OUTPUT_SPEED_HIGHEST PAL_STM32_OSPEED_HIGHEST # define PAL_PUPDR_FLOATING PAL_STM32_PUPDR_FLOATING # endif From ceaf35c741220656ad2c3d5b3da29cc0c19217f5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Thomas=20Wei=C3=9Fschuh?= Date: Thu, 16 Sep 2021 04:24:06 +0200 Subject: [PATCH 002/595] [Bug] Fix descriptor for USB Programmable Buttons (#14455) --- tmk_core/protocol/usb_descriptor.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tmk_core/protocol/usb_descriptor.c b/tmk_core/protocol/usb_descriptor.c index f720eea8d9..ebe27a1450 100644 --- a/tmk_core/protocol/usb_descriptor.c +++ b/tmk_core/protocol/usb_descriptor.c @@ -242,7 +242,7 @@ const USB_Descriptor_HIDReport_Datatype_t PROGMEM SharedReport[] = { HID_RI_USAGE(8, 0x01), // Consumer Control HID_RI_COLLECTION(8, 0x01), // Application HID_RI_REPORT_ID(8, REPORT_ID_PROGRAMMABLE_BUTTON), - HID_RI_USAGE(8, 0x09), // Programmable Buttons + HID_RI_USAGE(8, 0x03), // Programmable Buttons HID_RI_COLLECTION(8, 0x04), // Named Array HID_RI_USAGE_PAGE(8, 0x09), // Button HID_RI_USAGE_MINIMUM(8, 0x01), // Button 1 From 40c58b1734a074106610e4e0006054b4ccef4f9a Mon Sep 17 00:00:00 2001 From: Felix Jen Date: Wed, 15 Sep 2021 19:25:03 -0700 Subject: [PATCH 003/595] [Keyboard] Add Absolute Designs AD65 Keyboard (#14391) Co-authored-by: Ryan --- keyboards/fjlabs/ad65/ad65.c | 14 +++ keyboards/fjlabs/ad65/ad65.h | 32 ++++++ keyboards/fjlabs/ad65/config.h | 105 ++++++++++++++++++ keyboards/fjlabs/ad65/info.json | 84 ++++++++++++++ .../fjlabs/ad65/keymaps/default/keymap.c | 39 +++++++ keyboards/fjlabs/ad65/keymaps/via/keymap.c | 57 ++++++++++ keyboards/fjlabs/ad65/keymaps/via/rules.mk | 1 + keyboards/fjlabs/ad65/readme.md | 11 ++ keyboards/fjlabs/ad65/rules.mk | 25 +++++ 9 files changed, 368 insertions(+) create mode 100644 keyboards/fjlabs/ad65/ad65.c create mode 100644 keyboards/fjlabs/ad65/ad65.h create mode 100644 keyboards/fjlabs/ad65/config.h create mode 100644 keyboards/fjlabs/ad65/info.json create mode 100644 keyboards/fjlabs/ad65/keymaps/default/keymap.c create mode 100644 keyboards/fjlabs/ad65/keymaps/via/keymap.c create mode 100644 keyboards/fjlabs/ad65/keymaps/via/rules.mk create mode 100644 keyboards/fjlabs/ad65/readme.md create mode 100644 keyboards/fjlabs/ad65/rules.mk diff --git a/keyboards/fjlabs/ad65/ad65.c b/keyboards/fjlabs/ad65/ad65.c new file mode 100644 index 0000000000..5714fa8b3c --- /dev/null +++ b/keyboards/fjlabs/ad65/ad65.c @@ -0,0 +1,14 @@ +/* +Copyright 2021 +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include "ad65.h" diff --git a/keyboards/fjlabs/ad65/ad65.h b/keyboards/fjlabs/ad65/ad65.h new file mode 100644 index 0000000000..f43c6e10f8 --- /dev/null +++ b/keyboards/fjlabs/ad65/ad65.h @@ -0,0 +1,32 @@ +/* +Copyright 2021 +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "quantum.h" + +/* Phantom Keymap Definitions */ +#define LAYOUT_all( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2E, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K46, K49, K4A, K4C, K4D, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, K49, K4A, KC_NO, K4C, K4D, K4E } \ +} diff --git a/keyboards/fjlabs/ad65/config.h b/keyboards/fjlabs/ad65/config.h new file mode 100644 index 0000000000..8f9d672d83 --- /dev/null +++ b/keyboards/fjlabs/ad65/config.h @@ -0,0 +1,105 @@ +/* +Copyright 2021 + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x7074 // FJLaboratories +#define PRODUCT_ID 0x0010 // AD65 +#define DEVICE_VER 0x0001 // Version 1 +#define MANUFACTURER Absolute Designs +#define PRODUCT AD65 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + *å +*/ + +// Checked with Eagle Schematic +#define MATRIX_ROW_PINS { F4, F1, F7, F6, F5 } +#define MATRIX_COL_PINS { F0, B1, B2, B3, B7, D0, D1, D2, D3, D5, D7, B4, B5, B6, C6 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* Define Indicator LED's */ +#define LED_CAPS_LOCK_PIN C7 + +/* Define less important options */ + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION diff --git a/keyboards/fjlabs/ad65/info.json b/keyboards/fjlabs/ad65/info.json new file mode 100644 index 0000000000..36ed900b6c --- /dev/null +++ b/keyboards/fjlabs/ad65/info.json @@ -0,0 +1,84 @@ +{ + "keyboard_name": "Absolute Designs 65", + "url": "https://arnoldh93.wixsite.com/website", + "maintainer": "FJLaboratories", + "layouts": { + "LAYOUT_all": { + "layout": [ + {"x": 0, "y": 0}, + {"x": 1, "y": 0}, + {"x": 2, "y": 0}, + {"x": 3, "y": 0}, + {"x": 4, "y": 0}, + {"x": 5, "y": 0}, + {"x": 6, "y": 0}, + {"x": 7, "y": 0}, + {"x": 8, "y": 0}, + {"x": 9, "y": 0}, + {"x": 10, "y": 0}, + {"x": 11, "y": 0}, + {"x": 12, "y": 0}, + {"x": 13, "y": 0}, + {"x": 14, "y": 0}, + {"x": 15, "y": 0}, + + {"x": 0, "y": 1, "w": 1.5}, + {"x": 1.5, "y": 1}, + {"x": 2.5, "y": 1}, + {"x": 3.5, "y": 1}, + {"x": 4.5, "y": 1}, + {"x": 5.5, "y": 1}, + {"x": 6.5, "y": 1}, + {"x": 7.5, "y": 1}, + {"x": 8.5, "y": 1}, + {"x": 9.5, "y": 1}, + {"x": 10.5, "y": 1}, + {"x": 11.5, "y": 1}, + {"x": 12.5, "y": 1}, + {"x": 13.5, "y": 1, "w": 1.5}, + {"x": 15, "y": 1}, + + {"x": 0, "y": 2, "w": 1.75}, + {"x": 1.75, "y": 2}, + {"x": 2.75, "y": 2}, + {"x": 3.75, "y": 2}, + {"x": 4.75, "y": 2}, + {"x": 5.75, "y": 2}, + {"x": 6.75, "y": 2}, + {"x": 7.75, "y": 2}, + {"x": 8.75, "y": 2}, + {"x": 9.75, "y": 2}, + {"x": 10.75, "y": 2}, + {"x": 11.75, "y": 2}, + {"x": 12.75, "y": 2, "w": 2.25}, + {"x": 15, "y": 2}, + + {"x": 0, "y": 3, "w": 1.25}, + {"x": 1.25, "y": 3}, + {"x": 2.25, "y": 3}, + {"x": 3.25, "y": 3}, + {"x": 4.25, "y": 3}, + {"x": 5.25, "y": 3}, + {"x": 6.25, "y": 3}, + {"x": 7.25, "y": 3}, + {"x": 8.25, "y": 3}, + {"x": 9.25, "y": 3}, + {"x": 10.25, "y": 3}, + {"x": 11.25, "y": 3}, + {"x": 12.25, "y": 3, "w": 1.75}, + {"x": 14, "y": 3}, + {"x": 15, "y": 3}, + + {"x": 0, "y": 4, "w": 1.25}, + {"x": 1.25, "y": 4, "w": 1.25}, + {"x": 2.5, "y": 4, "w": 1.25}, + {"x": 3.75, "y": 4, "w": 6.25}, + {"x": 10, "y": 4, "w": 1.25}, + {"x": 11.25, "y": 4, "w": 1.25}, + {"x": 13, "y": 4}, + {"x": 14, "y": 4}, + {"x": 15, "y": 4} + ] + } + } +} diff --git a/keyboards/fjlabs/ad65/keymaps/default/keymap.c b/keyboards/fjlabs/ad65/keymaps/default/keymap.c new file mode 100644 index 0000000000..e7e22b1476 --- /dev/null +++ b/keyboards/fjlabs/ad65/keymaps/default/keymap.c @@ -0,0 +1,39 @@ +/* +Copyright 2021 +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + +enum layers { + _LAYER0, + _LAYER1, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_LAYER0] = LAYOUT_all( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_GRV, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + + [_LAYER1] = LAYOUT_all( + KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_BSPC, KC_DEL, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, RESET, KC_PGUP, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, NK_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, KC_MUTE, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT + ) +}; diff --git a/keyboards/fjlabs/ad65/keymaps/via/keymap.c b/keyboards/fjlabs/ad65/keymaps/via/keymap.c new file mode 100644 index 0000000000..1e91ac327e --- /dev/null +++ b/keyboards/fjlabs/ad65/keymaps/via/keymap.c @@ -0,0 +1,57 @@ +/* +Copyright 2021 +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + +enum layers { + _LAYER0, + _LAYER1, + _LAYER2, + _LAYER3, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_LAYER0] = LAYOUT_all( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_GRV, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + + [_LAYER1] = LAYOUT_all( + KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_BSPC, KC_DEL, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, RESET, KC_PGUP, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, NK_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, KC_MUTE, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT + ), + + [_LAYER2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + [_LAYER3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/fjlabs/ad65/keymaps/via/rules.mk b/keyboards/fjlabs/ad65/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/fjlabs/ad65/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/fjlabs/ad65/readme.md b/keyboards/fjlabs/ad65/readme.md new file mode 100644 index 0000000000..cdfb13086a --- /dev/null +++ b/keyboards/fjlabs/ad65/readme.md @@ -0,0 +1,11 @@ +# Absolute Designs 65 by FJLaboratories + +The following is the QMK Firmware for the Absolute Designs 65 PCB for [Absolute Designs](https://arnoldh93.wixsite.com/website). +* Keyboard Maintainer: FJLaboratories +* Hardware Supported: Absolute Designs 65 (AD65) + +Make example for this keyboard (after setting up your build environment): + + make fjlabs/ad65:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). To enter bootloader, press the reset button at the back of the PCB near the microcontroller. diff --git a/keyboards/fjlabs/ad65/rules.mk b/keyboards/fjlabs/ad65/rules.mk new file mode 100644 index 0000000000..58e569b739 --- /dev/null +++ b/keyboards/fjlabs/ad65/rules.mk @@ -0,0 +1,25 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency +F_CPU = 8000000 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +KEYBOARD_LOCK_ENABLE = yes From ae821ce4b77f873f5122747ee48c02778637bac6 Mon Sep 17 00:00:00 2001 From: Felix Jen Date: Wed, 15 Sep 2021 19:25:30 -0700 Subject: [PATCH 004/595] [Keyboard] Add FJLabs TF60 Variants and TF65 Variant (#14392) Co-authored-by: Ryan --- keyboards/fjlabs/tf60ansi/config.h | 121 ++++++++++++++++++ keyboards/fjlabs/tf60ansi/info.json | 76 +++++++++++ .../fjlabs/tf60ansi/keymaps/default/keymap.c | 40 ++++++ .../fjlabs/tf60ansi/keymaps/via/keymap.c | 58 +++++++++ .../fjlabs/tf60ansi/keymaps/via/rules.mk | 1 + keyboards/fjlabs/tf60ansi/readme.md | 27 ++++ keyboards/fjlabs/tf60ansi/rules.mk | 27 ++++ keyboards/fjlabs/tf60ansi/tf60ansi.c | 14 ++ keyboards/fjlabs/tf60ansi/tf60ansi.h | 32 +++++ keyboards/fjlabs/tf60v2/config.h | 121 ++++++++++++++++++ keyboards/fjlabs/tf60v2/info.json | 78 +++++++++++ .../fjlabs/tf60v2/keymaps/default/keymap.c | 40 ++++++ keyboards/fjlabs/tf60v2/keymaps/via/keymap.c | 58 +++++++++ keyboards/fjlabs/tf60v2/keymaps/via/rules.mk | 1 + keyboards/fjlabs/tf60v2/readme.md | 27 ++++ keyboards/fjlabs/tf60v2/rules.mk | 27 ++++ keyboards/fjlabs/tf60v2/tf60v2.c | 14 ++ keyboards/fjlabs/tf60v2/tf60v2.h | 32 +++++ keyboards/fjlabs/tf65rgbv2/config.h | 121 ++++++++++++++++++ keyboards/fjlabs/tf65rgbv2/info.json | 83 ++++++++++++ .../fjlabs/tf65rgbv2/keymaps/default/keymap.c | 40 ++++++ .../fjlabs/tf65rgbv2/keymaps/via/keymap.c | 58 +++++++++ .../fjlabs/tf65rgbv2/keymaps/via/rules.mk | 1 + keyboards/fjlabs/tf65rgbv2/readme.md | 27 ++++ keyboards/fjlabs/tf65rgbv2/rules.mk | 27 ++++ keyboards/fjlabs/tf65rgbv2/tf65rgbv2.c | 14 ++ keyboards/fjlabs/tf65rgbv2/tf65rgbv2.h | 32 +++++ 27 files changed, 1197 insertions(+) create mode 100644 keyboards/fjlabs/tf60ansi/config.h create mode 100644 keyboards/fjlabs/tf60ansi/info.json create mode 100644 keyboards/fjlabs/tf60ansi/keymaps/default/keymap.c create mode 100644 keyboards/fjlabs/tf60ansi/keymaps/via/keymap.c create mode 100644 keyboards/fjlabs/tf60ansi/keymaps/via/rules.mk create mode 100644 keyboards/fjlabs/tf60ansi/readme.md create mode 100644 keyboards/fjlabs/tf60ansi/rules.mk create mode 100644 keyboards/fjlabs/tf60ansi/tf60ansi.c create mode 100644 keyboards/fjlabs/tf60ansi/tf60ansi.h create mode 100644 keyboards/fjlabs/tf60v2/config.h create mode 100644 keyboards/fjlabs/tf60v2/info.json create mode 100644 keyboards/fjlabs/tf60v2/keymaps/default/keymap.c create mode 100644 keyboards/fjlabs/tf60v2/keymaps/via/keymap.c create mode 100644 keyboards/fjlabs/tf60v2/keymaps/via/rules.mk create mode 100644 keyboards/fjlabs/tf60v2/readme.md create mode 100644 keyboards/fjlabs/tf60v2/rules.mk create mode 100644 keyboards/fjlabs/tf60v2/tf60v2.c create mode 100644 keyboards/fjlabs/tf60v2/tf60v2.h create mode 100644 keyboards/fjlabs/tf65rgbv2/config.h create mode 100644 keyboards/fjlabs/tf65rgbv2/info.json create mode 100644 keyboards/fjlabs/tf65rgbv2/keymaps/default/keymap.c create mode 100644 keyboards/fjlabs/tf65rgbv2/keymaps/via/keymap.c create mode 100644 keyboards/fjlabs/tf65rgbv2/keymaps/via/rules.mk create mode 100644 keyboards/fjlabs/tf65rgbv2/readme.md create mode 100644 keyboards/fjlabs/tf65rgbv2/rules.mk create mode 100644 keyboards/fjlabs/tf65rgbv2/tf65rgbv2.c create mode 100644 keyboards/fjlabs/tf65rgbv2/tf65rgbv2.h diff --git a/keyboards/fjlabs/tf60ansi/config.h b/keyboards/fjlabs/tf60ansi/config.h new file mode 100644 index 0000000000..eede9b7544 --- /dev/null +++ b/keyboards/fjlabs/tf60ansi/config.h @@ -0,0 +1,121 @@ +/* +Copyright 2021 + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x7074 // FJLabs +#define PRODUCT_ID 0x1004 // tf60ansi +#define DEVICE_VER 0x0001 // Version 1 +#define MANUFACTURER FJLabs +#define PRODUCT TF60ANSI + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ + +// Checked with Eagle Schematic +#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6 } +#define MATRIX_COL_PINS { C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, B3, B2, B1 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* Define RGB Underglow */ +#define RGB_DI_PIN F7 +#define RGBLED_NUM 64 +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE +#define RGBLIGHT_LIMIT_VAL 108 +#define RGB_VAL_STEP 12 +#define RGBLIGHT_DEFAULT_SPD 144 +#define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_SWIRL +/* #define RGBLIGHT_LAYER_BLINK*/ + +/* Define less important options */ + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION diff --git a/keyboards/fjlabs/tf60ansi/info.json b/keyboards/fjlabs/tf60ansi/info.json new file mode 100644 index 0000000000..4ed7aa91dc --- /dev/null +++ b/keyboards/fjlabs/tf60ansi/info.json @@ -0,0 +1,76 @@ +{ + "keyboard_name": "TF60 ANSI", + "url": "https://www.fjlaboratories.com/", + "maintainer": "FJLabs", + "layouts": { + "LAYOUT_60_ansi": { + "layout": [ + {"x": 0, "y": 0}, + {"x": 1, "y": 0}, + {"x": 2, "y": 0}, + {"x": 3, "y": 0}, + {"x": 4, "y": 0}, + {"x": 5, "y": 0}, + {"x": 6, "y": 0}, + {"x": 7, "y": 0}, + {"x": 8, "y": 0}, + {"x": 9, "y": 0}, + {"x": 10, "y": 0}, + {"x": 11, "y": 0}, + {"x": 12, "y": 0}, + {"x": 13, "y": 0, "w": 2}, + + {"x": 0, "y": 1, "w": 1.5}, + {"x": 1.5, "y": 1}, + {"x": 2.5, "y": 1}, + {"x": 3.5, "y": 1}, + {"x": 4.5, "y": 1}, + {"x": 5.5, "y": 1}, + {"x": 6.5, "y": 1}, + {"x": 7.5, "y": 1}, + {"x": 8.5, "y": 1}, + {"x": 9.5, "y": 1}, + {"x": 10.5, "y": 1}, + {"x": 11.5, "y": 1}, + {"x": 12.5, "y": 1}, + {"x": 13.5, "y": 1, "w": 1.5}, + + {"x": 0, "y": 2, "w": 1.75}, + {"x": 1.75, "y": 2}, + {"x": 2.75, "y": 2}, + {"x": 3.75, "y": 2}, + {"x": 4.75, "y": 2}, + {"x": 5.75, "y": 2}, + {"x": 6.75, "y": 2}, + {"x": 7.75, "y": 2}, + {"x": 8.75, "y": 2}, + {"x": 9.75, "y": 2}, + {"x": 10.75, "y": 2}, + {"x": 11.75, "y": 2}, + {"x": 12.75, "y": 2, "w": 2.25}, + + {"x": 0, "y": 3, "w": 2.25}, + {"x": 2.25, "y": 3}, + {"x": 3.25, "y": 3}, + {"x": 4.25, "y": 3}, + {"x": 5.25, "y": 3}, + {"x": 6.25, "y": 3}, + {"x": 7.25, "y": 3}, + {"x": 8.25, "y": 3}, + {"x": 9.25, "y": 3}, + {"x": 10.25, "y": 3}, + {"x": 11.25, "y": 3}, + {"x": 12.25, "y": 3, "w": 2.75}, + + {"x": 0, "y": 4, "w": 1.25}, + {"x": 1.25, "y": 4, "w": 1.25}, + {"x": 2.5, "y": 4, "w": 1.25}, + {"x": 3.75, "y": 4, "w": 6.25}, + {"x": 10, "y": 4, "w": 1.25}, + {"x": 11.25, "y": 4, "w": 1.25}, + {"x": 12.5, "y": 4, "w": 1.25}, + {"x": 13.75, "y": 4, "w": 1.25} + ] + } + } +} diff --git a/keyboards/fjlabs/tf60ansi/keymaps/default/keymap.c b/keyboards/fjlabs/tf60ansi/keymaps/default/keymap.c new file mode 100644 index 0000000000..7873f0e5e5 --- /dev/null +++ b/keyboards/fjlabs/tf60ansi/keymaps/default/keymap.c @@ -0,0 +1,40 @@ +/* +Copyright 2021 +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + +enum layers { + _LAYER0, + _LAYER1, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_LAYER0] = LAYOUT_60_ansi( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTRL + ), + + [_LAYER1] = LAYOUT_60_ansi( + KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUSE, RESET, + KC_TRNS, RGB_SPI, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, NK_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) + +}; \ No newline at end of file diff --git a/keyboards/fjlabs/tf60ansi/keymaps/via/keymap.c b/keyboards/fjlabs/tf60ansi/keymaps/via/keymap.c new file mode 100644 index 0000000000..2e4dac7fc2 --- /dev/null +++ b/keyboards/fjlabs/tf60ansi/keymaps/via/keymap.c @@ -0,0 +1,58 @@ +/* +Copyright 2021 +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + +enum layers { + _LAYER0, + _LAYER1, + _LAYER2, + _LAYER3, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_LAYER0] = LAYOUT_60_ansi( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTRL + ), + + [_LAYER1] = LAYOUT_60_ansi( + KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUSE, RESET, + KC_TRNS, RGB_SPI, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, NK_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + [_LAYER2] = LAYOUT_60_ansi( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + [_LAYER3] = LAYOUT_60_ansi( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + +}; diff --git a/keyboards/fjlabs/tf60ansi/keymaps/via/rules.mk b/keyboards/fjlabs/tf60ansi/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/fjlabs/tf60ansi/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/fjlabs/tf60ansi/readme.md b/keyboards/fjlabs/tf60ansi/readme.md new file mode 100644 index 0000000000..29cbad3fca --- /dev/null +++ b/keyboards/fjlabs/tf60ansi/readme.md @@ -0,0 +1,27 @@ +# FJLabs TF60 ANSI + +The following is the QMK Firmware for the FJLabs TF60 ANSI PCB, a universal tray mount 60% hotswap PCB with per key RGB LED's. + +The PCB will feature: +* Kailh Hotswap sockets +* QMK & VIA compatibility +* Per-Key RGB LED's + +--- + +* Keyboard Maintainer: FJLabs +* Hardware Supported: TF60 ANSI + +Make example for this keyboard (after setting up your build environment): + + make fjlabs/tf60ansi:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available \ No newline at end of file diff --git a/keyboards/fjlabs/tf60ansi/rules.mk b/keyboards/fjlabs/tf60ansi/rules.mk new file mode 100644 index 0000000000..6e16f42b85 --- /dev/null +++ b/keyboards/fjlabs/tf60ansi/rules.mk @@ -0,0 +1,27 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency +F_CPU = 8000000 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +KEYBOARD_LOCK_ENABLE = yes + +LAYOUTS = 60_ansi diff --git a/keyboards/fjlabs/tf60ansi/tf60ansi.c b/keyboards/fjlabs/tf60ansi/tf60ansi.c new file mode 100644 index 0000000000..da31f8eaff --- /dev/null +++ b/keyboards/fjlabs/tf60ansi/tf60ansi.c @@ -0,0 +1,14 @@ +/* +Copyright 2021 +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include "tf60ansi.h" diff --git a/keyboards/fjlabs/tf60ansi/tf60ansi.h b/keyboards/fjlabs/tf60ansi/tf60ansi.h new file mode 100644 index 0000000000..bafc28891d --- /dev/null +++ b/keyboards/fjlabs/tf60ansi/tf60ansi.h @@ -0,0 +1,32 @@ +/* +Copyright 2021 +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "quantum.h" + +/* TF60 ANSI Keymap Definitions */ +#define LAYOUT_60_ansi( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3C, \ + K40, K41, K42, K45, K49, K4A, K4C, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, KC_NO, K3C, KC_NO }, \ + { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, K49, K4A, KC_NO, K4C, K4D } \ +} diff --git a/keyboards/fjlabs/tf60v2/config.h b/keyboards/fjlabs/tf60v2/config.h new file mode 100644 index 0000000000..11cb92a33f --- /dev/null +++ b/keyboards/fjlabs/tf60v2/config.h @@ -0,0 +1,121 @@ +/* +Copyright 2021 + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x7074 // FJLabs +#define PRODUCT_ID 0x1005 // tf60v2 +#define DEVICE_VER 0x0001 // Version 1 +#define MANUFACTURER FJLabs +#define PRODUCT TF60v2 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ + +// Checked with Eagle Schematic +#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6 } +#define MATRIX_COL_PINS { C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, B3, B2, B1 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* Define RGB Underglow */ +#define RGB_DI_PIN F7 +#define RGBLED_NUM 64 +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE +#define RGBLIGHT_LIMIT_VAL 108 +#define RGB_VAL_STEP 12 +#define RGBLIGHT_DEFAULT_SPD 144 +#define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_SWIRL +/* #define RGBLIGHT_LAYER_BLINK*/ + +/* Define less important options */ + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION diff --git a/keyboards/fjlabs/tf60v2/info.json b/keyboards/fjlabs/tf60v2/info.json new file mode 100644 index 0000000000..c2d6c02872 --- /dev/null +++ b/keyboards/fjlabs/tf60v2/info.json @@ -0,0 +1,78 @@ +{ + "keyboard_name": "TF60 RGB V2", + "url": "https://www.fjlaboratories.com/", + "maintainer": "FJLabs", + "layouts": { + "LAYOUT_60_ansi_arrow": { + "layout": [ + {"x": 0, "y": 0}, + {"x": 1, "y": 0}, + {"x": 2, "y": 0}, + {"x": 3, "y": 0}, + {"x": 4, "y": 0}, + {"x": 5, "y": 0}, + {"x": 6, "y": 0}, + {"x": 7, "y": 0}, + {"x": 8, "y": 0}, + {"x": 9, "y": 0}, + {"x": 10, "y": 0}, + {"x": 11, "y": 0}, + {"x": 12, "y": 0}, + {"x": 13, "y": 0, "w": 2}, + + {"x": 0, "y": 1, "w": 1.5}, + {"x": 1.5, "y": 1}, + {"x": 2.5, "y": 1}, + {"x": 3.5, "y": 1}, + {"x": 4.5, "y": 1}, + {"x": 5.5, "y": 1}, + {"x": 6.5, "y": 1}, + {"x": 7.5, "y": 1}, + {"x": 8.5, "y": 1}, + {"x": 9.5, "y": 1}, + {"x": 10.5, "y": 1}, + {"x": 11.5, "y": 1}, + {"x": 12.5, "y": 1}, + {"x": 13.5, "y": 1, "w": 1.5}, + + {"x": 0, "y": 2, "w": 1.75}, + {"x": 1.75, "y": 2}, + {"x": 2.75, "y": 2}, + {"x": 3.75, "y": 2}, + {"x": 4.75, "y": 2}, + {"x": 5.75, "y": 2}, + {"x": 6.75, "y": 2}, + {"x": 7.75, "y": 2}, + {"x": 8.75, "y": 2}, + {"x": 9.75, "y": 2}, + {"x": 10.75, "y": 2}, + {"x": 11.75, "y": 2}, + {"x": 12.75, "y": 2, "w": 2.25}, + + {"x": 0, "y": 3, "w": 2.25}, + {"x": 2.25, "y": 3}, + {"x": 3.25, "y": 3}, + {"x": 4.25, "y": 3}, + {"x": 5.25, "y": 3}, + {"x": 6.25, "y": 3}, + {"x": 7.25, "y": 3}, + {"x": 8.25, "y": 3}, + {"x": 9.25, "y": 3}, + {"x": 10.25, "y": 3}, + {"x": 11.25, "y": 3, "w": 1.75}, + {"x": 13, "y": 3}, + {"x": 14, "y": 3}, + + {"x": 0, "y": 4, "w": 1.25}, + {"x": 1.25, "y": 4, "w": 1.25}, + {"x": 2.5, "y": 4, "w": 1.25}, + {"x": 3.75, "y": 4, "w": 6.25}, + {"x": 10, "y": 4}, + {"x": 11, "y": 4}, + {"x": 12, "y": 4}, + {"x": 13, "y": 4}, + {"x": 14, "y": 4} + ] + } + } +} diff --git a/keyboards/fjlabs/tf60v2/keymaps/default/keymap.c b/keyboards/fjlabs/tf60v2/keymaps/default/keymap.c new file mode 100644 index 0000000000..a725021a1c --- /dev/null +++ b/keyboards/fjlabs/tf60v2/keymaps/default/keymap.c @@ -0,0 +1,40 @@ +/* +Copyright 2021 +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + +enum layers { + _LAYER0, + _LAYER1, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_LAYER0] = LAYOUT_60_ansi_arrow( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, RSFT_T(KC_SLSH), KC_UP, KC_DEL, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT + ), + + [_LAYER1] = LAYOUT_60_ansi_arrow( + KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUSE, RESET, + KC_TRNS, RGB_SPI, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, NK_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) + +}; \ No newline at end of file diff --git a/keyboards/fjlabs/tf60v2/keymaps/via/keymap.c b/keyboards/fjlabs/tf60v2/keymaps/via/keymap.c new file mode 100644 index 0000000000..5937f59e26 --- /dev/null +++ b/keyboards/fjlabs/tf60v2/keymaps/via/keymap.c @@ -0,0 +1,58 @@ +/* +Copyright 2021 +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + +enum layers { + _LAYER0, + _LAYER1, + _LAYER2, + _LAYER3, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_LAYER0] = LAYOUT_60_ansi_arrow( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, RSFT_T(KC_SLSH), KC_UP, KC_DEL, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT + ), + + [_LAYER1] = LAYOUT_60_ansi_arrow( + KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUSE, RESET, + KC_TRNS, RGB_SPI, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, NK_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + [_LAYER2] = LAYOUT_60_ansi_arrow( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + [_LAYER3] = LAYOUT_60_ansi_arrow( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + +}; diff --git a/keyboards/fjlabs/tf60v2/keymaps/via/rules.mk b/keyboards/fjlabs/tf60v2/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/fjlabs/tf60v2/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/fjlabs/tf60v2/readme.md b/keyboards/fjlabs/tf60v2/readme.md new file mode 100644 index 0000000000..22e624e68f --- /dev/null +++ b/keyboards/fjlabs/tf60v2/readme.md @@ -0,0 +1,27 @@ +# FJLabs TF60 RGB V2 + +The following is the QMK Firmware for the FJLabs TF60 RGB V2 PCB, a universal tray mount 60% hotswap PCB with per key RGB LED's. + +The PCB will feature: +* Kailh Hotswap sockets +* QMK & VIA compatibility +* Per-Key RGB LED's + +--- + +* Keyboard Maintainer: FJLabs +* Hardware Supported: TF60 RGB V2 + +Make example for this keyboard (after setting up your build environment): + + make fjlabs/tf60v2:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). Y + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available \ No newline at end of file diff --git a/keyboards/fjlabs/tf60v2/rules.mk b/keyboards/fjlabs/tf60v2/rules.mk new file mode 100644 index 0000000000..bf43d35264 --- /dev/null +++ b/keyboards/fjlabs/tf60v2/rules.mk @@ -0,0 +1,27 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency +F_CPU = 8000000 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +KEYBOARD_LOCK_ENABLE = yes + +LAYOUTS = 60_ansi_arrow diff --git a/keyboards/fjlabs/tf60v2/tf60v2.c b/keyboards/fjlabs/tf60v2/tf60v2.c new file mode 100644 index 0000000000..7a73d63901 --- /dev/null +++ b/keyboards/fjlabs/tf60v2/tf60v2.c @@ -0,0 +1,14 @@ +/* +Copyright 2021 +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include "tf60v2.h" diff --git a/keyboards/fjlabs/tf60v2/tf60v2.h b/keyboards/fjlabs/tf60v2/tf60v2.h new file mode 100644 index 0000000000..52ddffdffd --- /dev/null +++ b/keyboards/fjlabs/tf60v2/tf60v2.h @@ -0,0 +1,32 @@ +/* +Copyright 2021 +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "quantum.h" + +/* TF60 ANSI Keymap Definitions */ +#define LAYOUT_60_ansi_arrow( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3C, K3D, \ + K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, KC_NO, K3C, K3D }, \ + { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, K49, K4A, K4B, K4C, K4D } \ +} diff --git a/keyboards/fjlabs/tf65rgbv2/config.h b/keyboards/fjlabs/tf65rgbv2/config.h new file mode 100644 index 0000000000..65e1932f43 --- /dev/null +++ b/keyboards/fjlabs/tf65rgbv2/config.h @@ -0,0 +1,121 @@ +/* +Copyright 2021 + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x7074 // FJLabs +#define PRODUCT_ID 0x1007 // tf60v2 +#define DEVICE_VER 0x0001 // Version 1 +#define MANUFACTURER FJLabs +#define PRODUCT TF65RGBv2 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ + +// Checked with Eagle Schematic +#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6 } +#define MATRIX_COL_PINS { C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, B3, B2, B1, D1 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* Define RGB Underglow */ +#define RGB_DI_PIN F7 +#define RGBLED_NUM 68 +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE +#define RGBLIGHT_LIMIT_VAL 96 +#define RGB_VAL_STEP 12 +#define RGBLIGHT_DEFAULT_SPD 144 +#define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_SWIRL +/* #define RGBLIGHT_LAYER_BLINK*/ + +/* Define less important options */ + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION diff --git a/keyboards/fjlabs/tf65rgbv2/info.json b/keyboards/fjlabs/tf65rgbv2/info.json new file mode 100644 index 0000000000..fe91dcaec5 --- /dev/null +++ b/keyboards/fjlabs/tf65rgbv2/info.json @@ -0,0 +1,83 @@ +{ + "keyboard_name": "TF65 RGB V2", + "url": "https://www.fjlaboratories.com/", + "maintainer": "FJLabs", + "layouts": { + "LAYOUT_65_ansi": { + "layout": [ + {"x": 0, "y": 0}, + {"x": 1, "y": 0}, + {"x": 2, "y": 0}, + {"x": 3, "y": 0}, + {"x": 4, "y": 0}, + {"x": 5, "y": 0}, + {"x": 6, "y": 0}, + {"x": 7, "y": 0}, + {"x": 8, "y": 0}, + {"x": 9, "y": 0}, + {"x": 10, "y": 0}, + {"x": 11, "y": 0}, + {"x": 12, "y": 0}, + {"x": 13, "y": 0, "w": 2}, + {"x": 15, "y": 0}, + + {"x": 0, "y": 1, "w": 1.5}, + {"x": 1.5, "y": 1}, + {"x": 2.5, "y": 1}, + {"x": 3.5, "y": 1}, + {"x": 4.5, "y": 1}, + {"x": 5.5, "y": 1}, + {"x": 6.5, "y": 1}, + {"x": 7.5, "y": 1}, + {"x": 8.5, "y": 1}, + {"x": 9.5, "y": 1}, + {"x": 10.5, "y": 1}, + {"x": 11.5, "y": 1}, + {"x": 12.5, "y": 1}, + {"x": 13.5, "y": 1, "w": 1.5}, + {"x": 15, "y": 1}, + + {"x": 0, "y": 2, "w": 1.75}, + {"x": 1.75, "y": 2}, + {"x": 2.75, "y": 2}, + {"x": 3.75, "y": 2}, + {"x": 4.75, "y": 2}, + {"x": 5.75, "y": 2}, + {"x": 6.75, "y": 2}, + {"x": 7.75, "y": 2}, + {"x": 8.75, "y": 2}, + {"x": 9.75, "y": 2}, + {"x": 10.75, "y": 2}, + {"x": 11.75, "y": 2}, + {"x": 12.75, "y": 2, "w": 2.25}, + {"x": 15, "y": 2}, + + {"x": 0, "y": 3, "w": 2.25}, + {"x": 2.25, "y": 3}, + {"x": 3.25, "y": 3}, + {"x": 4.25, "y": 3}, + {"x": 5.25, "y": 3}, + {"x": 6.25, "y": 3}, + {"x": 7.25, "y": 3}, + {"x": 8.25, "y": 3}, + {"x": 9.25, "y": 3}, + {"x": 10.25, "y": 3}, + {"x": 11.25, "y": 3}, + {"x": 12.25, "y": 3, "w": 1.75}, + {"x": 14, "y": 3}, + {"x": 15, "y": 3}, + + {"x": 0, "y": 4, "w": 1.25}, + {"x": 1.25, "y": 4, "w": 1.25}, + {"x": 2.5, "y": 4, "w": 1.25}, + {"x": 3.75, "y": 4, "w": 6.25}, + {"x": 10, "y": 4}, + {"x": 11, "y": 4}, + {"x": 12, "y": 4}, + {"x": 13, "y": 4}, + {"x": 14, "y": 4}, + {"x": 15, "y": 4} + ] + } + } +} diff --git a/keyboards/fjlabs/tf65rgbv2/keymaps/default/keymap.c b/keyboards/fjlabs/tf65rgbv2/keymaps/default/keymap.c new file mode 100644 index 0000000000..96c2351e89 --- /dev/null +++ b/keyboards/fjlabs/tf65rgbv2/keymaps/default/keymap.c @@ -0,0 +1,40 @@ +/* +Copyright 2021 +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + +enum layers { + _LAYER0, + _LAYER1, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_LAYER0] = LAYOUT_65_ansi( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_DEL, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT + ), + + [_LAYER1] = LAYOUT_65_ansi( + KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUSE, RESET, KC_TRNS, + KC_TRNS, RGB_SPI, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, NK_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) + +}; \ No newline at end of file diff --git a/keyboards/fjlabs/tf65rgbv2/keymaps/via/keymap.c b/keyboards/fjlabs/tf65rgbv2/keymaps/via/keymap.c new file mode 100644 index 0000000000..3e071bd079 --- /dev/null +++ b/keyboards/fjlabs/tf65rgbv2/keymaps/via/keymap.c @@ -0,0 +1,58 @@ +/* +Copyright 2021 +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + +enum layers { + _LAYER0, + _LAYER1, + _LAYER2, + _LAYER3, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_LAYER0] = LAYOUT_65_ansi( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_DEL, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT + ), + + [_LAYER1] = LAYOUT_65_ansi( + KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUSE, RESET, KC_TRNS, + KC_TRNS, RGB_SPI, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, NK_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + [_LAYER2] = LAYOUT_65_ansi( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + [_LAYER3] = LAYOUT_65_ansi( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + +}; diff --git a/keyboards/fjlabs/tf65rgbv2/keymaps/via/rules.mk b/keyboards/fjlabs/tf65rgbv2/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/fjlabs/tf65rgbv2/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/fjlabs/tf65rgbv2/readme.md b/keyboards/fjlabs/tf65rgbv2/readme.md new file mode 100644 index 0000000000..0aea9ef8fd --- /dev/null +++ b/keyboards/fjlabs/tf65rgbv2/readme.md @@ -0,0 +1,27 @@ +# FJLabs TF65 RGB V2 + +The following is the QMK Firmware for the FJLabs TF65 RGB V2 PCB, a universal tray mount 65% hotswap PCB with per key RGB LED's. + +The PCB will feature: +* Kailh Hotswap sockets +* QMK & VIA compatibility +* Per-Key RGB LED's + +--- + +* Keyboard Maintainer: FJLabs +* Hardware Supported: TF65 RGB V2 + +Make example for this keyboard (after setting up your build environment): + + make fjlabs/tf65rgbv2:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available \ No newline at end of file diff --git a/keyboards/fjlabs/tf65rgbv2/rules.mk b/keyboards/fjlabs/tf65rgbv2/rules.mk new file mode 100644 index 0000000000..1ec4ee2ac2 --- /dev/null +++ b/keyboards/fjlabs/tf65rgbv2/rules.mk @@ -0,0 +1,27 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency +F_CPU = 8000000 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +KEYBOARD_LOCK_ENABLE = yes + +LAYOUTS = 65_ansi \ No newline at end of file diff --git a/keyboards/fjlabs/tf65rgbv2/tf65rgbv2.c b/keyboards/fjlabs/tf65rgbv2/tf65rgbv2.c new file mode 100644 index 0000000000..637b6d05e8 --- /dev/null +++ b/keyboards/fjlabs/tf65rgbv2/tf65rgbv2.c @@ -0,0 +1,14 @@ +/* +Copyright 2021 +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include "tf65rgbv2.h" diff --git a/keyboards/fjlabs/tf65rgbv2/tf65rgbv2.h b/keyboards/fjlabs/tf65rgbv2/tf65rgbv2.h new file mode 100644 index 0000000000..434d156688 --- /dev/null +++ b/keyboards/fjlabs/tf65rgbv2/tf65rgbv2.h @@ -0,0 +1,32 @@ +/* +Copyright 2021 +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "quantum.h" + +/* TF60 ANSI Keymap Definitions */ +#define LAYOUT_65_ansi( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K2E, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3C, K3D, K3E, \ + K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K2E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, K1E }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, KC_NO, K3C, K3D, K3E }, \ + { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, K49, K4A, K4B, K4C, K4D, K4E } \ +} From b5cc2bdc34d9091e7b31fcb9676e0d37b0282aad Mon Sep 17 00:00:00 2001 From: Vino Rodrigues <366673+vinorodrigues@users.noreply.github.com> Date: Thu, 16 Sep 2021 13:28:40 +1000 Subject: [PATCH 005/595] [Keyboard] Add the Idobao ID96 keyboard (#14371) Co-authored-by: Joel Challis Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- keyboards/idobao/id96/config.h | 82 ++++++++++++ keyboards/idobao/id96/id96.c | 19 +++ keyboards/idobao/id96/id96.h | 63 ++++++++++ keyboards/idobao/id96/info.json | 119 ++++++++++++++++++ .../idobao/id96/keymaps/default/keymap.c | 90 +++++++++++++ keyboards/idobao/id96/keymaps/via/keymap.c | 62 +++++++++ keyboards/idobao/id96/keymaps/via/rules.mk | 2 + keyboards/idobao/id96/readme.md | 27 ++++ keyboards/idobao/id96/rules.mk | 21 ++++ 9 files changed, 485 insertions(+) create mode 100644 keyboards/idobao/id96/config.h create mode 100644 keyboards/idobao/id96/id96.c create mode 100644 keyboards/idobao/id96/id96.h create mode 100644 keyboards/idobao/id96/info.json create mode 100644 keyboards/idobao/id96/keymaps/default/keymap.c create mode 100644 keyboards/idobao/id96/keymaps/via/keymap.c create mode 100644 keyboards/idobao/id96/keymaps/via/rules.mk create mode 100644 keyboards/idobao/id96/readme.md create mode 100644 keyboards/idobao/id96/rules.mk diff --git a/keyboards/idobao/id96/config.h b/keyboards/idobao/id96/config.h new file mode 100644 index 0000000000..6bf1f14c43 --- /dev/null +++ b/keyboards/idobao/id96/config.h @@ -0,0 +1,82 @@ +/* + * This file is part of the QMK Firmware distribution (https://github.com/qmk/qmk_firmware). + * Copyright 2018-2021 "kaylanm" [Melody96] + * Vino Rodrigues [ID96] + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, version 3. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x6964 // "id" +#define PRODUCT_ID 0x0096 +#define DEVICE_VER 0x0001 +#define MANUFACTURER IDOBAO +#define PRODUCT ID96 + +/* key matrix size */ +#define MATRIX_ROWS 12 +#define MATRIX_COLS 9 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { B7, B3, B2, B1, B0, E6, F0, F1, F4, F5, F6, F7 } +#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION ROW2COL + +#define LED_NUM_LOCK_PIN C6 +#define LED_CAPS_LOCK_PIN C7 +#define LED_PIN_ON_STATE 0 + +/* number of backlight levels */ +#define BACKLIGHT_PIN B6 +#ifdef BACKLIGHT_PIN + #define BACKLIGHT_LEVELS 7 + #define BACKLIGHT_BREATHING +#endif + +/* Set location for BootMagic key = [ESC] */ +#define BOOTMAGIC_LITE_ROW 5 +#define BOOTMAGIC_LITE_COLUMN 0 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +#define RGB_DI_PIN E2 +#ifdef RGB_DI_PIN + #define RGBLIGHT_EFFECT_BREATHING + #define RGBLIGHT_EFFECT_RAINBOW_MOOD + #define RGBLIGHT_EFFECT_RAINBOW_SWIRL + #define RGBLIGHT_EFFECT_SNAKE + #define RGBLIGHT_EFFECT_KNIGHT + #define RGBLIGHT_EFFECT_CHRISTMAS + #define RGBLIGHT_EFFECT_STATIC_GRADIENT + #define RGBLIGHT_EFFECT_RGB_TEST + #define RGBLIGHT_EFFECT_ALTERNATING + #define RGBLIGHT_EFFECT_TWINKLE + #define RGBLED_NUM 18 + #define RGBLIGHT_HUE_STEP 8 + #define RGBLIGHT_SAT_STEP 8 + #define RGBLIGHT_VAL_STEP 8 +#endif diff --git a/keyboards/idobao/id96/id96.c b/keyboards/idobao/id96/id96.c new file mode 100644 index 0000000000..1bb863f1ff --- /dev/null +++ b/keyboards/idobao/id96/id96.c @@ -0,0 +1,19 @@ +/* + * This file is part of the QMK Firmware distribution (https://github.com/qmk/qmk_firmware). + * Copyright 2018-2021 "kaylanm" [Melody96] + * Vino Rodrigues [ID96] + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, version 3. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "id96.h" diff --git a/keyboards/idobao/id96/id96.h b/keyboards/idobao/id96/id96.h new file mode 100644 index 0000000000..adb8f47689 --- /dev/null +++ b/keyboards/idobao/id96/id96.h @@ -0,0 +1,63 @@ +/* + * This file is part of the QMK Firmware distribution (https://github.com/qmk/qmk_firmware). + * Copyright 2018-2021 "kaylanm" [Melody96] + * Vino Rodrigues [ID96] + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, version 3. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +/* + * The layout macro for the ID96 keyboard, with illustrative grid of a typical + * assignment. + * ,--------------------------------------------------------------------------- + * |ESC|F1|F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|PSC|HOM|END|PGU|PGD|DEL| + * ,--------------------------------------------------------------------------| + * | ` |1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | + | \ |BKS|NLK| / | * | - | + * |--------------------------------------------------------------------------| + * | TAB | Q | W | E | R | T | Y | U | I | O | P | [ | ] | \ | 7 | 8 | 9 | + | + * |--------------------------------------------------------------------------| + * | CTRL | A | S | D | F | G | H | J | K | L | ; | ' | RET | 4 | 5 | 6 | + | + * |--------------------------------------------------------------------------| + * | LSHIFT | Z | X | C | V | B | N | M | , | . | / |RSHFT| ↑ | 1 | 2 | 3 |ENT| + * |--------------------------------------------------------------------------| + * |LCTL|LWIN|LALT| SPACE |CTL|ALT|FN | ← | ↓ | → | 0 | . |ENT| + * `--------------------------------------------------------------------------- + */ + +#define ____ KC_NO + +#define LAYOUT( \ + K050, K051, K052, K053, K054, K055, K056, K057, K058, K118, K117, K115, K114, K113, K116, K112, K111, K110, K063, \ + K040, K041, K042, K043, K044, K045, K046, K047, K048, K108, K107, K105, K104, K103, K106, K102, K101, K100, K064, \ + K030, K031, K032, K033, K034, K035, K036, K037, K038, K098, K097, K095, K094, K084, K096, K092, K091, K090, \ + K020, K021, K022, K023, K024, K025, K026, K027, K028, K088, K087, K085, K093, K086, K082, K081, K080, \ + K010, K011, K012, K013, K014, K015, K016, K017, K018, K078, K077, K075, K074, K073, K076, K072, K071, K070, \ + K000, K001, K002, K006, K008, K007, K005, K004, K003, K066, K062, K061, K060 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008 }, \ + { K010, K011, K012, K013, K014, K015, K016, K017, K018 }, \ + { K020, K021, K022, K023, K024, K025, K026, K027, K028 }, \ + { K030, K031, K032, K033, K034, K035, K036, K037, K038 }, \ + { K040, K041, K042, K043, K044, K045, K046, K047, K048 }, \ + { K050, K051, K052, K053, K054, K055, K056, K057, K058 }, \ + { K060, K061, K062, K063, K064, ____, K066, ____, ____ }, \ + { K070, K071, K072, K073, K074, K075, K076, K077, K078 }, \ + { K080, K081, K082, ____, K084, K085, K086, K087, K088 }, \ + { K090, K091, K092, K093, K094, K095, K096, K097, K098 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108 }, \ + { K110, K111, K112, K113, K114, K115, K116, K117, K118 } \ +} diff --git a/keyboards/idobao/id96/info.json b/keyboards/idobao/id96/info.json new file mode 100644 index 0000000000..f972af64a2 --- /dev/null +++ b/keyboards/idobao/id96/info.json @@ -0,0 +1,119 @@ +{ + "keyboard_name": "id96", + "url": "https://www.idobao.net/collections/90/products/idobao-id96-aluminum-keyboard-kit", + "maintainer": "vinorodrigues", + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":1, "y":0}, + {"label":"F2", "x":2, "y":0}, + {"label":"F3", "x":3, "y":0}, + {"label":"F4", "x":4, "y":0}, + {"label":"F5", "x":5, "y":0}, + {"label":"F6", "x":6, "y":0}, + {"label":"F7", "x":7, "y":0}, + {"label":"F8", "x":8, "y":0}, + {"label":"F9", "x":9, "y":0}, + {"label":"F10", "x":10, "y":0}, + {"label":"F11", "x":11, "y":0}, + {"label":"F12", "x":12, "y":0}, + {"label":"PrtSc", "x":13, "y":0}, + {"label":"Scroll Lock", "x":14, "y":0}, + {"label":"Pause", "x":15, "y":0}, + {"label":"Insert", "x":16, "y":0}, + {"label":"Home", "x":17, "y":0}, + {"label":"PgUp", "x":18, "y":0}, + + {"label":"~", "x":0, "y":1}, + {"label":"!", "x":1, "y":1}, + {"label":"@", "x":2, "y":1}, + {"label":"#", "x":3, "y":1}, + {"label":"$", "x":4, "y":1}, + {"label":"%", "x":5, "y":1}, + {"label":"^", "x":6, "y":1}, + {"label":"&", "x":7, "y":1}, + {"label":"*", "x":8, "y":1}, + {"label":"(", "x":9, "y":1}, + {"label":")", "x":10, "y":1}, + {"label":"_", "x":11, "y":1}, + {"label":"+", "x":12, "y":1}, + {"x":13, "y":1}, + {"x":14, "y":1}, + {"label":"Num Lock", "x":15, "y":1}, + {"label":"/", "x":16, "y":1}, + {"label":"*", "x":17, "y":1}, + {"label":"-", "x":18, "y":1}, + + {"label":"Tab", "x":0, "y":2, "w":1.5}, + {"label":"Q", "x":1.5, "y":2}, + {"label":"W", "x":2.5, "y":2}, + {"label":"E", "x":3.5, "y":2}, + {"label":"R", "x":4.5, "y":2}, + {"label":"T", "x":5.5, "y":2}, + {"label":"Y", "x":6.5, "y":2}, + {"label":"U", "x":7.5, "y":2}, + {"label":"I", "x":8.5, "y":2}, + {"label":"O", "x":9.5, "y":2}, + {"label":"P", "x":10.5, "y":2}, + {"label":"{", "x":11.5, "y":2}, + {"label":"}", "x":12.5, "y":2}, + {"label":"|", "x":13.5, "y":2, "w":1.5}, + {"label":"7", "x":15, "y":2}, + {"label":"8", "x":16, "y":2}, + {"label":"9", "x":17, "y":2}, + {"label":"+", "x":18, "y":2}, + + {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, + {"label":"A", "x":1.75, "y":3}, + {"label":"S", "x":2.75, "y":3}, + {"label":"D", "x":3.75, "y":3}, + {"label":"F", "x":4.75, "y":3}, + {"label":"G", "x":5.75, "y":3}, + {"label":"H", "x":6.75, "y":3}, + {"label":"J", "x":7.75, "y":3}, + {"label":"K", "x":8.75, "y":3}, + {"label":"L", "x":9.75, "y":3}, + {"label":":", "x":10.75, "y":3}, + {"label":"\"", "x":11.75, "y":3}, + {"label":"Enter", "x":12.75, "y":3, "w":2.25}, + {"label":"4", "x":15, "y":3}, + {"label":"5", "x":16, "y":3}, + {"label":"6", "x":17, "y":3}, + {"x":18, "y":3}, + + {"label":"Shift", "x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4}, + {"label":"Z", "x":2.25, "y":4}, + {"label":"X", "x":3.25, "y":4}, + {"label":"C", "x":4.25, "y":4}, + {"label":"V", "x":5.25, "y":4}, + {"label":"B", "x":6.25, "y":4}, + {"label":"N", "x":7.25, "y":4}, + {"label":"M", "x":8.25, "y":4}, + {"label":"<", "x":9.25, "y":4}, + {"label":">", "x":10.25, "y":4}, + {"label":"?", "x":11.25, "y":4}, + {"label":"Shift", "x":12.25, "y":4, "w":1.75}, + {"label":"\u2191", "x":14, "y":4}, + {"label":"1", "x":15, "y":4}, + {"label":"2", "x":16, "y":4}, + {"label":"3", "x":17, "y":4}, + {"label":"Enter", "x":18, "y":4}, + + {"label":"Ctrl", "x":0, "y":5, "w":1.25}, + {"label":"Win", "x":1.25, "y":5, "w":1.25}, + {"label":"Alt", "x":2.5, "y":5, "w":1.25}, + {"x":3.75, "y":5, "w":6.25}, + {"label":"Alt", "x":10, "y":5}, + {"label":"Win", "x":11, "y":5}, + {"x":12, "y":5}, + {"label":"\u2190", "x":13, "y":5}, + {"label":"\u2193", "x":14, "y":5}, + {"label":"\u2192", "x":15, "y":5}, + {"label":"0", "x":16, "y":5}, + {"label":".", "x":17, "y":5}, + {"x":18, "y":5}] + } + } +} diff --git a/keyboards/idobao/id96/keymaps/default/keymap.c b/keyboards/idobao/id96/keymaps/default/keymap.c new file mode 100644 index 0000000000..587620bad4 --- /dev/null +++ b/keyboards/idobao/id96/keymaps/default/keymap.c @@ -0,0 +1,90 @@ +/* + * This file is part of the QMK Firmware distribution (https://github.com/qmk/qmk_firmware). + * Copyright 2018-2021 "kaylanm" [Melody96] + * Vino Rodrigues [ID96] + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, version 3. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +enum { + LAYER_0 = 0, + LAYER_1 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* Layer 0, default layer + ____________________________________________________________________________________________________________________________________________________________________________ + | | | | | | | | | | | | | | | | | | | | + | ESC* | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | P SCN | HOME | END | P UP | P DOWN | DEL | + |________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________| + | | | | | | | | | | | | | | | BACK | NUM | | | | + | ~` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | _ - | = + | \ | SPACE | LOCK | / | * | - | + |________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________| + | | | | | | | | | | | | [ | ] | | | | | | + | TAB | Q | W | E | R | T | Y | U | I | O | P | { | } | | \ | 7 | 8 | 9 | - | + |____________|________|________|________|________|________|________|________|________|________|________|________|________|_____________|________|________|________|________| + | | | | | | | | | | | ; | ' | | | | | | + | CAPS LOCK | A | S | D | F | G | H | J | K | L | : | " | ENTER | 4 | 5 | 6 | + | + |______________|________|________|________|________|________|________|________|________|________|________|________|____________________|________|________|________|________| + | | | | | | | | | | , | . | / | | | | | | | + | SHIFT | NUBS | Z | X | C | V | B | N | M | < | > | ? | SHIFT | UP | 1 | 2 | 3 | ENTER | + |_________|________|________|________|________|________|________|________|________|________|________|________|________________|________|________|________|________|________| + | | | | | | MO | MO | | | | | | | + | CTRL | LGUI | L ALT | SPACE | R ALT | _FN | _FN | LEFT | DOWN | RIGHT | 0 | . | ENTER | + |__________|__________|__________|________________________________________________________|________|________|________|________|________|________|________|________|________| + */ + + [LAYER_0] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_HOME, KC_END, KC_PGUP, KC_PGDN, KC_DEL, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PMNS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), MO(1), KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT), + + + /* Layer 1, function layer + ____________________________________________________________________________________________________________________________________________________________________________ + | | | | | | | | | | | | | | | VOL | VOL | | | | + | RESET | | | | | | | | | | | | | MUTE | DOWN | UP | | | | + |________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________| + | | | | | | | | | | | | | | | | | | | | + | | | | | | | | | | | | | | | | | | | | + |________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________|________| + | | RGB | | RGB | HUE | HUE | SATUR. | SATUR. | VALUE | VALUE | | | | | | | | | + | | TOGGLE | | MODE |INCREASE| DCRSE |INCREASE| DCRSE |INCREASE| DCRSE | | | | | | | | | + |____________|________|________|________|________|________|________|________|________|________|________|________|________|_____________|________|________|________|________| + | BACKLIGHT | | | | | | | | | | | | | | | | | + | TOGGLE | | | | | | | | | | | | | | | | | + |______________|________|________|________|________|________|________|________|________|________|________|________|____________________|________|________|________|________| + | | | | |BACKLHT |BACKLHT |BACKLHT | | | | | | | | | | | | + | | | | | DCRSE |TOGGLE |INCREASE| | | | | | | | | | | | + |_________|________|________|________|________|________|________|________|________|________|________|________|________________|________|________|________|________|________| + | | | | | | | | | | | | | | + | | | | | | | | | | | | | | + |__________|__________|__________|________________________________________________________|________|________|________|________|________|________|________|________|________| + BL_TOGG, BL_DEC, BL_INC changes the in-switch LEDs + */ + + + [LAYER_1] = LAYOUT( + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, RGB_TOG, _______, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, + BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, BL_DEC, BL_TOGG, BL_INC, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), +}; diff --git a/keyboards/idobao/id96/keymaps/via/keymap.c b/keyboards/idobao/id96/keymaps/via/keymap.c new file mode 100644 index 0000000000..1c927da824 --- /dev/null +++ b/keyboards/idobao/id96/keymaps/via/keymap.c @@ -0,0 +1,62 @@ +/* + * This file is part of the QMK Firmware distribution (https://github.com/qmk/qmk_firmware). + * Copyright 2018-2021 "kaylanm" [Melody96] + * Vino Rodrigues [ID96] + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, version 3. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +enum { + LAYER_0 = 0, + LAYER_1, + LAYER_2, + LAYER_3 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [LAYER_0] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_HOME, KC_END, KC_PGUP, KC_PGDN, KC_DEL, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PMNS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), MO(1), KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT), + + [LAYER_1] = LAYOUT( + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, RGB_TOG, _______, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, + BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, BL_DEC, BL_TOGG, BL_INC, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), + + [LAYER_2] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [LAYER_3] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + +}; diff --git a/keyboards/idobao/id96/keymaps/via/rules.mk b/keyboards/idobao/id96/keymaps/via/rules.mk new file mode 100644 index 0000000000..62bd1be5ec --- /dev/null +++ b/keyboards/idobao/id96/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes # reduce firmware size diff --git a/keyboards/idobao/id96/readme.md b/keyboards/idobao/id96/readme.md new file mode 100644 index 0000000000..01c42b4e73 --- /dev/null +++ b/keyboards/idobao/id96/readme.md @@ -0,0 +1,27 @@ +# Idobao ID96 + +![Idobao ID96](https://cdn.shopify.com/s/files/1/0382/1348/4675/products/96.png?v=1620272768) + +96-key Keyboard from Idobao. The PCB for this board is also commonly used in the Drop NYM96 and YMDK Melody96 + +* Keyboard Maintainer: [Vino Rodrigues](https://github.com/vinorodrigues) +* Hardware Supported: Idobao ID96 +* Hardware Availability: [Idobao ID96](https://www.idobao.net/collections/90/products/idobao-id96-aluminum-keyboard-kit) + +Make example for this keyboard (after setting up your build environment): + + make idobao/id96:default + +Flashing example for this keyboard: + + make idobao/id96:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available diff --git a/keyboards/idobao/id96/rules.mk b/keyboards/idobao/id96/rules.mk new file mode 100644 index 0000000000..aeff331e7e --- /dev/null +++ b/keyboards/idobao/id96/rules.mk @@ -0,0 +1,21 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output From 590b405468fec906a51767a5cda4aa30ada5d52f Mon Sep 17 00:00:00 2001 From: Bao Date: Wed, 15 Sep 2021 23:59:57 -0500 Subject: [PATCH 006/595] New CLI subcommand to create clang-compatible compilation database (`compile_commands.json`) (#14370) * pulled source from dev branch * missed a file from origin * formatting * revised argument names. relaxed matching rules to work for avr too * add docstrings * added docs. tightened up regex * remove unused imports * cleaning up command file. use existing qmk dir constant * rename parser library file * move lib functions into command file. there are only 2 and they aren't large * currently debugging... * more robustly find config * updated docs * remove unused imports * reuse make executable from the main make command * pulled source from dev branch * missed a file from origin * formatting * revised argument names. relaxed matching rules to work for avr too * add docstrings * added docs. tightened up regex * remove unused imports * cleaning up command file. use existing qmk dir constant * rename parser library file * move lib functions into command file. there are only 2 and they aren't large * currently debugging... * more robustly find config * updated docs * remove unused imports * reuse make executable from the main make command * remove MAKEFLAGS from environment for better control over process management * Update .gitignore Co-authored-by: Michael Forster * add a usage line to docs * doc change as suggested Co-authored-by: Nick Brassel * rename command * remove debug print statements * generate-compilation-database: fix arg handling * generate-comilation-db: improve error handling * use cli.run() instead of Popen() Co-authored-by: Xton Co-authored-by: Christon DeWan Co-authored-by: Michael Forster Co-authored-by: Nick Brassel --- .gitignore | 5 + docs/cli_commands.md | 27 ++++ lib/python/qmk/cli/__init__.py | 1 + .../qmk/cli/generate/compilation_database.py | 123 ++++++++++++++++++ lib/python/qmk/commands.py | 14 +- 5 files changed, 166 insertions(+), 4 deletions(-) create mode 100755 lib/python/qmk/cli/generate/compilation_database.py diff --git a/.gitignore b/.gitignore index f3b76f7edf..768f40b191 100644 --- a/.gitignore +++ b/.gitignore @@ -86,3 +86,8 @@ __pycache__ # Allow to exist but don't include it in the repo user_song_list.h + +# clangd +compile_commands.json +.clangd/ +.cache/ diff --git a/docs/cli_commands.md b/docs/cli_commands.md index 06568afb46..1427b592f5 100644 --- a/docs/cli_commands.md +++ b/docs/cli_commands.md @@ -320,6 +320,33 @@ qmk format-c qmk format-c -b branch_name ``` +## `qmk generate-compilation-database` + +**Usage**: + +``` +qmk generate-compilation-database [-kb KEYBOARD] [-km KEYMAP] +``` + +Creates a `compile_commands.json` file. + +Does your IDE/editor use a language server but doesn't _quite_ find all the necessary include files? Do you hate red squigglies? Do you wish your editor could figure out `#include QMK_KEYBOARD_H`? You might need a [compilation database](https://clang.llvm.org/docs/JSONCompilationDatabase.html)! The qmk tool can build this for you. + +This command needs to know which keyboard and keymap to build. It uses the same configuration options as the `qmk compile` command: arguments, current directory, and config files. + +**Example:** + +``` +$ cd ~/qmk_firmware/keyboards/gh60/satan/keymaps/colemak +$ qmk generate-compilation-database +Ψ Making clean +Ψ Gathering build instructions from make -n gh60/satan:colemak +Ψ Found 50 compile commands +Ψ Writing build database to /Users/you/src/qmk_firmware/compile_commands.json +``` + +Now open your dev environment and live a squiggly-free life. + ## `qmk docs` This command starts a local HTTP server which you can use for browsing or improving the docs. Default port is 8936. diff --git a/lib/python/qmk/cli/__init__.py b/lib/python/qmk/cli/__init__.py index 292dcbe812..944938824c 100644 --- a/lib/python/qmk/cli/__init__.py +++ b/lib/python/qmk/cli/__init__.py @@ -44,6 +44,7 @@ subcommands = [ 'qmk.cli.format.python', 'qmk.cli.format.text', 'qmk.cli.generate.api', + 'qmk.cli.generate.compilation_database', 'qmk.cli.generate.config_h', 'qmk.cli.generate.dfu_header', 'qmk.cli.generate.docs', diff --git a/lib/python/qmk/cli/generate/compilation_database.py b/lib/python/qmk/cli/generate/compilation_database.py new file mode 100755 index 0000000000..2748d96e7a --- /dev/null +++ b/lib/python/qmk/cli/generate/compilation_database.py @@ -0,0 +1,123 @@ +"""Creates a compilation database for the given keyboard build. +""" + +import itertools +import json +import os +import re +import shlex +import shutil +from functools import lru_cache +from pathlib import Path +from typing import Dict, Iterator, List, Union + +from milc import cli, MILC + +from qmk.commands import create_make_command +from qmk.constants import QMK_FIRMWARE +from qmk.decorators import automagic_keyboard, automagic_keymap + + +@lru_cache(maxsize=10) +def system_libs(binary: str) -> List[Path]: + """Find the system include directory that the given build tool uses. + """ + cli.log.debug("searching for system library directory for binary: %s", binary) + bin_path = shutil.which(binary) + return list(Path(bin_path).resolve().parent.parent.glob("*/include")) if bin_path else [] + + +file_re = re.compile(r'printf "Compiling: ([^"]+)') +cmd_re = re.compile(r'LOG=\$\((.+?)&&') + + +def parse_make_n(f: Iterator[str]) -> List[Dict[str, str]]: + """parse the output of `make -n ` + + This function makes many assumptions about the format of your build log. + This happens to work right now for qmk. + """ + + state = 'start' + this_file = None + records = [] + for line in f: + if state == 'start': + m = file_re.search(line) + if m: + this_file = m.group(1) + state = 'cmd' + + if state == 'cmd': + assert this_file + m = cmd_re.search(line) + if m: + # we have a hit! + this_cmd = m.group(1) + args = shlex.split(this_cmd) + args += ['-I%s' % s for s in system_libs(args[0])] + new_cmd = ' '.join(shlex.quote(s) for s in args if s != '-mno-thumb-interwork') + records.append({"directory": str(QMK_FIRMWARE.resolve()), "command": new_cmd, "file": this_file}) + state = 'start' + + return records + + +@cli.argument('-kb', '--keyboard', help='The keyboard to build a firmware for. Ignored when a configurator export is supplied.') +@cli.argument('-km', '--keymap', help='The keymap to build a firmware for. Ignored when a configurator export is supplied.') +@cli.subcommand('Create a compilation database.') +@automagic_keyboard +@automagic_keymap +def generate_compilation_database(cli: MILC) -> Union[bool, int]: + """Creates a compilation database for the given keyboard build. + + Does a make clean, then a make -n for this target and uses the dry-run output to create + a compilation database (compile_commands.json). This file can help some IDEs and + IDE-like editors work better. For more information about this: + + https://clang.llvm.org/docs/JSONCompilationDatabase.html + """ + command = None + # check both config domains: the magic decorator fills in `generate_compilation_database` but the user is + # more likely to have set `compile` in their config file. + current_keyboard = cli.config.generate_compilation_database.keyboard or cli.config.user.keyboard + current_keymap = cli.config.generate_compilation_database.keymap or cli.config.user.keymap + + if current_keyboard and current_keymap: + # Generate the make command for a specific keyboard/keymap. + command = create_make_command(current_keyboard, current_keymap, dry_run=True) + elif not current_keyboard: + cli.log.error('Could not determine keyboard!') + elif not current_keymap: + cli.log.error('Could not determine keymap!') + + if not command: + cli.log.error('You must supply both `--keyboard` and `--keymap`, or be in a directory for a keyboard or keymap.') + cli.echo('usage: qmk compiledb [-kb KEYBOARD] [-km KEYMAP]') + return False + + # remove any environment variable overrides which could trip us up + env = os.environ.copy() + env.pop("MAKEFLAGS", None) + + # re-use same executable as the main make invocation (might be gmake) + clean_command = [command[0], 'clean'] + cli.log.info('Making clean with {fg_cyan}%s', ' '.join(clean_command)) + cli.run(clean_command, capture_output=False, check=True, env=env) + + cli.log.info('Gathering build instructions from {fg_cyan}%s', ' '.join(command)) + + result = cli.run(command, capture_output=True, check=True, env=env) + db = parse_make_n(result.stdout.splitlines()) + if not db: + cli.log.error("Failed to parse output from make output:\n%s", result.stdout) + return False + + cli.log.info("Found %s compile commands", len(db)) + + dbpath = QMK_FIRMWARE / 'compile_commands.json' + + cli.log.info(f"Writing build database to {dbpath}") + dbpath.write_text(json.dumps(db, indent=4)) + + return True diff --git a/lib/python/qmk/commands.py b/lib/python/qmk/commands.py index 01c23b2612..2995a5fdab 100644 --- a/lib/python/qmk/commands.py +++ b/lib/python/qmk/commands.py @@ -28,7 +28,7 @@ def _find_make(): return make_cmd -def create_make_target(target, parallel=1, **env_vars): +def create_make_target(target, dry_run=False, parallel=1, **env_vars): """Create a make command Args: @@ -36,6 +36,9 @@ def create_make_target(target, parallel=1, **env_vars): target Usually a make rule, such as 'clean' or 'all'. + dry_run + make -n -- don't actually build + parallel The number of make jobs to run in parallel @@ -52,10 +55,10 @@ def create_make_target(target, parallel=1, **env_vars): for key, value in env_vars.items(): env.append(f'{key}={value}') - return [make_cmd, *get_make_parallel_args(parallel), *env, target] + return [make_cmd, *(['-n'] if dry_run else []), *get_make_parallel_args(parallel), *env, target] -def create_make_command(keyboard, keymap, target=None, parallel=1, **env_vars): +def create_make_command(keyboard, keymap, target=None, dry_run=False, parallel=1, **env_vars): """Create a make compile command Args: @@ -69,6 +72,9 @@ def create_make_command(keyboard, keymap, target=None, parallel=1, **env_vars): target Usually a bootloader. + dry_run + make -n -- don't actually build + parallel The number of make jobs to run in parallel @@ -84,7 +90,7 @@ def create_make_command(keyboard, keymap, target=None, parallel=1, **env_vars): if target: make_args.append(target) - return create_make_target(':'.join(make_args), parallel, **env_vars) + return create_make_target(':'.join(make_args), dry_run=dry_run, parallel=parallel, **env_vars) def get_git_version(current_time, repo_dir='.', check_dir='.'): From d140e41c93dcf0a429392310858ac905447324ac Mon Sep 17 00:00:00 2001 From: Jos Boersema <56587694+josjoha@users.noreply.github.com> Date: Thu, 16 Sep 2021 07:27:44 +0200 Subject: [PATCH 007/595] Adds optional hebrew layout (Unicode) (#14156) --- .../minivan/keymaps/josjoha/base_hebrew.c | 291 ++++++++++ .../minivan/keymaps/josjoha/base_hebrew.h | 52 ++ .../minivan/keymaps/josjoha/base_hebrew.md | 198 +++++++ .../minivan/keymaps/josjoha/base_numpad.h | 2 + .../keymaps/josjoha/base_qwerty_basearrow.h | 2 + .../minivan/keymaps/josjoha/keymap.c | 13 +- .../keymaps/josjoha/minifan_config_compact.h | 20 +- .../minivan/keymaps/josjoha/readme.md | 21 +- .../minivan/keymaps/josjoha/unicode_hebrew.h | 116 ++++ .../minivan/keymaps/josjoha/unicode_macros.c | 546 ++++++++++++++---- .../minivan/keymaps/josjoha/unicode_macros.h | 2 + .../minivan/keymaps/josjoha/unicode_weurope.h | 2 + .../minivan/keymaps/josjoha/user_config.h | 24 +- 13 files changed, 1157 insertions(+), 132 deletions(-) create mode 100644 keyboards/thevankeyboards/minivan/keymaps/josjoha/base_hebrew.c create mode 100644 keyboards/thevankeyboards/minivan/keymaps/josjoha/base_hebrew.h create mode 100644 keyboards/thevankeyboards/minivan/keymaps/josjoha/base_hebrew.md create mode 100644 keyboards/thevankeyboards/minivan/keymaps/josjoha/unicode_hebrew.h diff --git a/keyboards/thevankeyboards/minivan/keymaps/josjoha/base_hebrew.c b/keyboards/thevankeyboards/minivan/keymaps/josjoha/base_hebrew.c new file mode 100644 index 0000000000..cac77aac60 --- /dev/null +++ b/keyboards/thevankeyboards/minivan/keymaps/josjoha/base_hebrew.c @@ -0,0 +1,291 @@ +/* + * License (GPL): + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . + + * Author: © 2021 by Jos Boersema + * + */ + +// --------------------------------------v--------------------------------------- +// Configuration: +// --------------------------------------v--------------------------------------- + +// See the user configuration file: ./base_hebrew.h + +// --------------------------------------^--------------------------------------- +// Below here no more comfortable configuration options..... +// --------------------------------------^--------------------------------------- + + /* ⬇ */ + + /* Layer _..._BASE: default BASE layer (Hebrew) + * + * - Dual use keys create a delay in the key (tap/hold keys), therefore + * space is not dual use (most used key), neither is hyphen. + */ + +// Process user configuration wrt ‛Default’ or ‛Alternative’ spot for this layout. +# if defined(BASE_HEBREW__DEF_BASE) + [ _DEF_BASE ] = LAYOUT_redefined ( +# elif defined(BASE_HEBREW__ALT_BASE) + [ _ALT_BASE ] = LAYOUT_redefined ( +# endif + +/* + Layer _..._BASE (LeTteRs, standard Hebrew as in Israel) + ➡ This is a simple hebrew layout. Notice the letter ק is displaced from normal, + to retain compatibility with Dvorak-English for ,<.>. There are no niqqud + available, because it is far too many unique symbols in Unicode, and it is + rarely used. + + HEBREW_ISRAEL + | Right hand + index>middl>ring> pinky>pinky2> // Keys by finger + -o- <|> ... //-o- BASE access + Esc /; ׳ ק ר א | ט ו ן ם פ Bksp + Tab+LCtl ש ד ג/RLM כ₪ ע | י ח ל/LRM ך ף: ,״ //Right-Left-Mark + LSht+_PAD ז ס ב ה נ | מ צ ת< ץ> .? RSht+_FUN //<>os side flip? + +_MOV⁵ | +_RAR⁶ + --------------------------------------------------------------------------------------- + Left+LAlt Del;_ACC _..._NSY(_DRA) Enter+_MOV| Space _..._NSY(_DRA) LGUI Right;_RAR + hold hold₍₁,₂٭₎ hold | hold₍₁,₂٭₎ hold // switch type + hold₍₂₎ ^-┃-----------------------+--------^ ┃ // ₁₎ both = _DRA + ┗━━━_BON━━━╋┅───────────┄┄┄«or»┄┄┄─+─────────┅┛ // ₂₎ both = _BON + <1 ± <2 <3 <4 | 4> 3> 2> ± 1> // Keys by number + ^³ ^⁴ // Optional more keys + … … + + HEBREW_QWERTY + | Right hand + index>middl>ring> pinky>pinky2> // Keys by finger + -o- <|> ... //-o- BASE access + Esc ת• ץ• ק ר א | ט ו ן ם׳ פ״ Bksp + Tab+LCtl ש ד ג/RLM כ₪ ע | י ח ל/LRM ך ף: '" //Right-Left-Mark + LSht+_PAD ז ס ב ה נ | מ צ ,< .> /? RSht+_FUN + +_MOV⁵ | +_RAR⁶ + --------------------------------------------------------------------------------------- + Left+LAlt Del;_ACC _..._NSY(_DRA) Enter+_MOV| Space _..._NSY(_DRA) LGUI Right;_RAR + hold hold₍₁,₂٭₎ hold | hold₍₁,₂٭₎ hold // switch type + hold₍₂₎ ^-┃-----------------------+--------^ ┃ // ₁₎ both = _DRA + ┗━━━_BON━━━╋┅───────────┄┄┄«or»┄┄┄─+─────────┅┛ // ₂₎ both = _BON + <1 ± <2 <3 <4 | 4> 3> 2> ± 1> // Keys by number + ^³ ^⁴ // Optional more keys + … … + + HEBREW_DVORAK + | Right hand + index>middl>ring> pinky>pinky2> // Keys by finger + -o- <|> ... //-o- BASE access + Esc '" ,< .> ר א | ט ו ן ם׳ פ״ Bksp + Tab+LCtl ש ד ג/RLM כ₪ ע | י ח ל/LRM ך ף ־ //Right-Left-Mark + LSht+_PAD ז: ס ב ה נ | מ צ ת ץ ק• RSht+_FUN + +_MOV⁵ | +_RAR⁶ + --------------------------------------------------------------------------------------- + Left+LAlt Del;_ACC _..._NSY(_DRA) Enter+_MOV| Space _..._NSY(_DRA) LGUI Right;_RAR + hold hold₍₁,₂٭₎ hold | hold₍₁,₂٭₎ hold // switch type + hold₍₂₎ ^-┃-----------------------+--------^ ┃ // ₁₎ both = _DRA + ┗━━━_BON━━━╋┅───────────┄┄┄«or»┄┄┄─+─────────┅┛ // ₂₎ both = _BON + <1 ± <2 <3 <4 | 4> 3> 2> ± 1> // Keys by number + ^³ ^⁴ // Optional more keys + … … + + + ₁) Dual hold for _DRA, single hold for _..._NSY. Marked by: ^--…--^ + ₂) Hold key “<2” with either٭ key “<3” or “3>” for _BON, single hold “<2” for _ACC. Marked: ┗━━…━━┛ + ³) 'South paw' hardware configuration + ⁴) 'Arrow' hardware configuration + ³ ⁴) There are two more optional hardware keys, to make it easier to compile for + a 12x12x12x11 or 12x12x12x12 layouts. + ⁵) Left Shift when pressed with another key. Medium long: to toggle _PAD. Long: toggle _MOV. + ⁶) Right shift when pressed with another key. medium long: to toggle _FUN. Long: toggle _RAR. + ⁷) Letters marked with • are displaced from standard hebrew layout. +*/ +// +// , inde> , midd> , ring> , pink> , pink2> , +// -*!- , , , , , <|,> , , , , , , + KC_ESC + +# if defined(HEBREW_ISRAEL) + , XP_HEB_AA , XP_HEB_AB , XP_HEB_AC +# elif defined(HEBREW_QWERTY) + , XP_HEB_AA , XP_HEB_AB , XP_HEB_AC +# elif defined(HEBREW_DVORAK) + , KC_QUOT , KC_COMM , KC_DOT +# endif // HEBREW_DVORAK/QWERTY + , XP_HEB_AD , XP_HEB_AE , XP_HEB_AF , XP_HEB_AG , XP_HEB_AH , XP_HEB_AI , XP_HEB_AJ , KC_BSPC , + LCTL_T ( KC_TAB ) , XP_HEB_BA , XP_HEB_BB , XP_HEB_BC , XP_HEB_BD , XP_HEB_BE , XP_HEB_BF , XP_HEB_BG , XP_HEB_BH , XP_HEB_BI , XP_HEB_BJ +// ^^^^^^^^^ Different in Qwerty (done in macros) with ':' + +# if defined(HEBREW_ISRAEL) + , XP_HEB_BK , // ," +# elif defined(HEBREW_QWERTY) + , KC_QUOT , // '" +# elif defined(HEBREW_DVORAK) + , XP_HEB_MQF , // ־ +# endif // HEBREW_* + + CHOLTAP_LSHFT , XP_HEB_CA , XP_HEB_CB , XP_HEB_CC , XP_HEB_CD , XP_HEB_CE , XP_HEB_CF , XP_HEB_CG + +# if defined(HEBREW_ISRAEL) + , XP_HEB_CH , XP_HEB_CI , XP_HEB_CJ +# elif defined(HEBREW_QWERTY) + , KC_COMM , KC_DOT , KC_SLSH +# elif defined(HEBREW_DVORAK) + , XP_HEB_CH , XP_HEB_CI , XP_HEB_CJ +# endif // HEBREW_* + , CHOLTAP_RSHFT , +// ----------------------------------------------------------------------------------------------------------------- + LALT_T ( KC_LEFT ) + +# ifdef TRANSMINIVAN_LEFTSIDE + , MO ( _PAD ) +# endif + +# ifdef MORE_KEY__COMMAND + , MORE_key1_BASE +# endif + +# ifdef SWITCH_HOLD_ACC_NSY + , DUO_HOLD , CHOLTAP_ACCE +# else + , CHOLTAP_ACCE , DUO_HOLD +# endif + + , LEFTCENTER_THUMB + +# ifdef TRANSMINIVAN_MIDLEFT + , TRANS_MIDLEFT +# endif + + , RIGHTCENTER_THUMB , DUO_HOLD , KC__YGUI + +# ifdef TRANSMINIVAN_RIGHTSIDE + , MO ( _FUN ) +# endif + +# ifdef MORE_KEY__ARROW + , MORE_key2 +# endif + + , CHOLTAP_LAYR +// , , , <|,> , , , +// <1 ± ± , <2 , <3 , <4 |, 4> , 3> , 2> , ± ± 1> + + ), + + /* ⬆⬇ */ + + /* Layer _..._NSY: Numbers and symbols. + * Off hand Number input (-.Bksp ent (shft)tab). + */ + // KC_TILD does not work there, because of a limitation with shifted keys (nov 2019). + +// Process user configuration wrt ‛Default’ or ‛Alternative’ spot for this layout. +# if defined(BASE_HEBREW__DEF_BASE) + [ _DEF_NSY ] = LAYOUT_redefined ( +# elif defined(BASE_HEBREW__ALT_BASE) + [ _ALT_NSY ] = LAYOUT_redefined ( +# endif + +/* + Layer _..._NSY (Numbers and SYmbols) + ➡ The brace type symbols are *not* reversed as on standard hebrew boards (I find it confusing). + + HEBREW_ISRAEL & HEBREW_QWERTY + index>middl>ring>pin>pink2> + -*- <|> //(toggle) Access on _FUN + BASE ! @ # $ % | ^ & * ( ) Del + Tab+LCtl 1! 2@ 3# 4$ 5% | 6^ 7& 8* 9( 0) `~+RCtl + -+LSht [{ ]} -_ \| =+ | + | ־ { } ~+RSht + ^ // Only difference with Qwerty + --------------------------------------------------------------------------- + Left+LAlt ___ ___ Ent | . ___ LGUI Right+RAlt + -*- <|> -*- //(hold) Access on _..._BASE + <1 ± <2 <3 <4 | 4> 3> 2> ± 1> + … … + + HEBREW_DVORAK (Same as standard Dvorak) + index>middl>ring>pin>pink2> + -*- <|> //(toggle) Access on _FUN + BASE ! @ # $ % | ^ & * ( ) Del + Tab+LCtl 1! 2@ 3# 4$ 5% | 6^ 7& 8* 9( 0) `~+RCtl + -+LSht [{ ]} /? \| =+ | + | ? { } ~+RSht + --------------------------------------------------------------------------- + Left+LAlt ___ ___ Ent | . ___ LGUI Right+RAlt + -*- <|> -*- //(hold) Access on _..._BASE + <1 ± <2 <3 <4 | 4> 3> 2> ± 1> + … … +*/ +// +// +// , index> , middl> , ring> , pinky> , pink2> , +// , -*- , , , , <|,> , , , , , , + CTO_BASE , KC_EXLM , KC_AT , KC_HASH , KC_DLR , KC_PERC , KC_CIRC , KC_AMPR , KC_ASTR , KC_LPRN , KC_RPRN , KC_DEL , + LCTL_T ( KC_TAB ) , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , RCTL_T ( KC_GRV ) , + LSFT_DASH , KC_LBRC , KC_RBRC + +# if defined(HEBREW_ISRAEL) + , KC_MINUS // allows -_, with Maqaf on mirror place right +# elif defined(HEBREW_QWERTY) + , KC_MINUS // same as HEBREW_ISRAEL +# elif defined(HEBREW_DVORAK) + , KC_SLSH +# endif // HEBREW_* + + , KC_BSLS , KC_EQL , KC_PLUS , KC_PIPE + + +# if defined(HEBREW_ISRAEL) + , XP_HEB_MQF // '־' Maqaf +# elif defined(HEBREW_QWERTY) + , XP_HEB_MQF // +# elif defined(HEBREW_DVORAK) + , KC_QUES +# endif // HEBREW_* + , KC_LCBR , KC_RCBR , RSFT_TILDE , +// --------------------------------------------------------------------------------------------------------------------------------------------- + LALT_T ( KC_LEFT ) + +# ifdef TRANSMINIVAN_LEFTSIDE + , TRANS_LEFT +# endif + +# ifdef MORE_KEY__COMMAND + , MORE_key1 +# endif + + , _______ , _______ , KC_ENT + +# ifdef TRANSMINIVAN_MIDLEFT + , TRANS_MIDLEFT +# endif + , KC_DOT , DUO_HOLD , KC__YGUI + +# ifdef TRANSMINIVAN_RIGHTSIDE + , TRANS_RIGHT +# endif + +# ifdef MORE_KEY__ARROW + , MORE_key2 +# endif + + , RALT_T ( KC_RIGHT ) +// , , -*- , <|,> , -*- , , +// <1 ± ± , <2 , <3 , <4 |, 4> , 3> , 2> , ± ± 1> + + ), + + + /* ⬆⬇ */ diff --git a/keyboards/thevankeyboards/minivan/keymaps/josjoha/base_hebrew.h b/keyboards/thevankeyboards/minivan/keymaps/josjoha/base_hebrew.h new file mode 100644 index 0000000000..f5604b8f1e --- /dev/null +++ b/keyboards/thevankeyboards/minivan/keymaps/josjoha/base_hebrew.h @@ -0,0 +1,52 @@ +/* + * License (GPL): + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . + + * Author: © 2021 by Jos Boersema + * + */ + +#pragma once + +// --------------------------------------v--------------------------------------- +// Configuration: +// --------------------------------------v--------------------------------------- + + /* Harmonize layout with a Latin layout + * + * See base_hebrew.md for design objectives. + */ + #define HEBREW_ISRAEL // Close to standard Israeli hebrew. +//#define HEBREW_QWERTY // Harmonize punctuation symbols with Qwerty. +//#define HEBREW_DVORAK // Harmonize punctuation symbols with Dvorak. + +// --------------------------------------^--------------------------------------- +// Below here no more comfortable configuration options..... +// --------------------------------------^--------------------------------------- + + /* Redefine a layer in this file + * + * _Activate_ one or more of the below BASESFILE_LAYER_..., to redefine the layer + * in this file. The version in ./keymap.c will be ignored. Keep in mind to use + * transparent keys (_______) for “hold” layer switch keys on the BASE map, for + * your new layer. + */ +// #define BASESFILE_LAYER_ACC +// #define BASESFILE_LAYER_DRA +// #define BASESFILE_LAYER_BON +// #define BASESFILE_LAYER_PAD +// #define BASESFILE_LAYER_MOV +// #define BASESFILE_LAYER_RAR +// #define BASESFILE_LAYER_FUN diff --git a/keyboards/thevankeyboards/minivan/keymaps/josjoha/base_hebrew.md b/keyboards/thevankeyboards/minivan/keymaps/josjoha/base_hebrew.md new file mode 100644 index 0000000000..0e7adc40c8 --- /dev/null +++ b/keyboards/thevankeyboards/minivan/keymaps/josjoha/base_hebrew.md @@ -0,0 +1,198 @@ +# Minifan layout + +Compiled for: Hebrew +==================== + +This file details the compile version `#define BASE_HEBREW__DEF_BASE, +BASE_HEBREW__ALT_BASE`. This is a basic Hebrew layout, without niqqud. + +Only the most common symbols are implemented. Hebrew symbols are all +done in Unicode. + +See also ![./readme.md](./readme.md) chapter 7 _Language support_. + +Parenthesis/braces/etc direction seems to be dealt with at the computer +side, depending on the surrounding symbols. The keyboard is printing +these symbols unchanged from what they are in standard Latin layouts, +and are represented that way in the manual. + +Options +======= + +You can compile the hebrew to be like a common Israeli layout, or to harmonize the +punctuation symbols with either Dvorak or Qwerty. See the configuration file +![./base_hebrew.h](./base_hebrew.h) + +☞ Israeli Hebrew + +As close to a simple standard hebrew layout as possible. +A little larger memory cost than the other options. No `'"` ASCII quotes symbols, +but proper ׳ and ״ (in Unicode). + +☞ Qwerty with Hebrew + +The letters ת, ץ get displaced from the standard hebrew layout. +Numerical layer is the same as standard Qwerty, except the symbol +`_` symbol becomes `־` (Maqaf). No `;` symbol. + +☞ Qwerty derivatives with Hebrew + +It is adviced to use Qwerty with Hebrew in this case, and adjust by hand +coding if needed. “Workman” should harmonize the same as Qwerty. +Colemak displaces the “;:” key relative to Qwerty, therefore you may +like to change the “:” shifted symbol (by hand). The obscurity of this +use case gets extreme, there will not be options for this. + +☞ Dvorak with Hebrew + +The letter ק gets displaced from the standard hebrew layout. +Numerical layer is the same as standard Dvorak. No `;` symbol. + + +Flash memory cost +----------------- + +This layout adds several dozen new Unicode symbols, which takes up a certain +amount of additional space in keyboard memory. If you end up going over +the limit, you may need to change your compilation software setup, and/or +you can look into the “Eviscerations” chapters in ![./user_config.h](./user_config.h) + +Hebrew keymaps +-------------- + +──────────Hebrew Israel──────── + +![Minivan layout Image BASEdef-alt](http://socialism.nl/misc/minivan/minivan_base_layer_hebrew-israel_ve.jpg) +Layer: `..._BASE` + +![Minivan layout Image NSYdef-alt](http://socialism.nl/misc/minivan/minivan_nsy_layer_hebrew-israel_vd.jpg) +Layer: `..._NSY` + +──────────in common──────────── + +(…) + +──────────Hebrew Qwerty──────── + +![Minivan layout Image BASEdef-alt](http://socialism.nl/misc/minivan/minivan_base_layer_hebrew-qwerty_ve.jpg) +Layer: `..._BASE` + +![Minivan layout Image NSYdef-alt](http://socialism.nl/misc/minivan/minivan_nsy_layer_hebrew-israel_vd.jpg) +Layer: `..._NSY` + +──────────in common──────────── + +(…) + +──────────Hebrew Dvorak──────── + +![Minivan layout Image BASEdef-alt](http://socialism.nl/misc/minivan/minivan_base_layer_hebrew-dvorak_ve.jpg) +Layer: `..._BASE` + +![Minivan layout Image NSYdef-alt](http://socialism.nl/misc/minivan/minivan_nsy_layer_dvorak_vc.jpg) +Layer: `..._NSY` (Same as Dvorak.) + +──────────in common──────────── + +(…) + +For more about the other layers, see ➡ ![readme.md](./readme.md) ⬅ + +![Minivan illustration Overview layers by key, Hebrew](http://socialism.nl/misc/minivan/minivan-all-layers-clear-visualization-by-key_hebrew_2000_vk.jpg) + +Layers (text) +============= + +(The “x” padding was necessary to undo the direction of these characters being reversed. +This layout might still not be represenetd correctly on your system. See the graphics instead.) + + HEBREW_ISRAEL + | Right hand + index>middl>ring> pinky>pinky2> // Keys by finger + -o- <|> ... //-o- BASE access + Escxxxxxxxx/;xxxx׳xxxxxקxxxxxרxxxxxאxxxxx|xטxxxxxוxxxxxןxxxxxםxxxxxפxxxxxxxxxxBksp + Tab+LCtlxxxשxxxxxדxxxxxג/RLMxכx₪xxxעxxxxx|xיxxxxxחxxxxxל/LRMxךxxxxxף:xxxxxxxxxxx,״ //Right-Left-Mark + LSht+_PADxxזxxxxxסxxxxxבxxxxxהxxxxxנxxxxx|xמxxxxxצxxxxxתxxxx.?xxxxRSht+_FUN //<>os side flip? + +_MOV⁵ | +_RAR⁶ + --------------------------------------------------------------------------------------- + + HEBREW_QWERTY + | Right hand + index>middl>ring> pinky>pinky2> // Keys by finger + -o- <|> ... //-o- BASE access + Escxxxxxxxxת•xxxxץ•xxxxקxxxxxרxxxxxאxxxxx|xטxxxxxוxxxxxןxxxxxםx׳xxxפx״xxxxxxxxBksp + Tab+LCtlxxxשxxxxxדxxxxxג/RLMxכx₪xxxעxxxxx|xיxxxxxחxxxxxל/LRMxךxxxxxף:xxxxxxxxxxx'" //Right-Left-Mark + LSht+_PADxxזxxxxxסxxxxxבxxxxxהxxxxxנxxxxx|xמxxxxxצxxxxx,xxxx/?xxxxRSht+_FUN + +_MOV⁵ | +_RAR⁶ + --------------------------------------------------------------------------------------- + (…) + + HEBREW_DVORAK + Layer _..._BASE (LeTteRs, standard Hebrew) + | Right hand + index>middl>ring> pinky>pinky2> // Keys by finger + -o- <|> ... //-o- BASE access + Escxxxxxxxx'"xxxx,xxxxרxxxxxאxxxxx|xטxxxxxוxxxxxןxxxxxםx׳xxxפx״xxxxxxxxBksp + Tab+LCtlxxxשxxxxxדxxxxxג/RLMxכx₪xxxעxxxxx|xיxxxxxחxxxxxל/LRMxךxxxxxףxxxxxxxxxxxxx־ //Right/Left-Mark + LSht+_PADxxז:xxxxסxxxxxבxxxxxהxxxxxנxxxxx|xמxxxxxצxxxxxתxxxxxץxxxxxק•xxxxRSht+_FUN + +_MOV⁵ | +_RAR⁶ + --------------------------------------------------------------------------------------- + Left+LAlt Del;_ACC _DEF_NSY(_DRA) Enter+_MOV| Space _DEF_NSY(_DRA) RGUI Right;_RAR + hold hold₍₁,₂٭₎ hold | hold₍₁,₂٭₎ hold // switch type + hold₍₂₎ ^-┃-----------------------+--------^ ┃ // ₁₎ both = _DRA + ┗━━━_BON━━━╋┅───────────┄┄┄«or»┄┄┄─+─────────┅┛ // ₂₎ both = _BON + <1 ± <2 <3 <4 | 4> 3> 2> ± 1> // Keys by number + ^³ ^⁴ // Optional more keys + (LGUI) (_MOV) + + + ₁) Dual hold for _DRA, single hold for _DEF_NSY. Marked by: ^--…--^ + ₂) Hold key “<2” with either٭ key “<3” or “3>” for _BON, single hold “<2” for _ACC. Marked: ┗━━…━━┛ + ₃) 'South paw' hardware configuration. Configurable, default shown. + ₄) 'Arrow' hardware configuration Configurable, default shown. + ₃ ₄) There are two more optional hardware keys, to make it easier to compile for + a 12x12x12x11 or 12x12x12x12 layouts. + ₅) Left Shift when pressed with another key. Medium long: to toggle _PAD. Long: toggle _MOV. + ₆) Right shift when pressed with another key. medium long: to toggle _FUN. Long: toggle _RAR. + ⁷) Letters marked with • are displaced from standard hebrew layout. + +Remarks: The left modifiers have a slight delay in combination with an outside pointer device (mouse, stylus). +It seems this will be difficult to fix, because it is spread over two devices. To avoid the +±0.2 second delay, activate a layer where the modifiers are direct (`_PAD`), using the layer toggle on left shift. + +The two keys with ';' (Del;`_ACC`, Right;`_RAR`) do not auto-repeat on double tap, like QMK normal layer-tap keys. +There is an uncluttered _Delete_ on `_PAD`, an uncluttered _Right_ arrow on the `_MOV` layer. + +Holding both `_DEF_NSY` keys left and right of the "split space bar" (enter, space) results in layer `_DRA`. + +Holding either one of the just above mentioned `_DEF_NSY` layer keys (<3 and 3>), with the `_ACC` layer key +(on <2) results in layer `_BON`. + +- - - + + Layer _..._NSY (Numbers and SYmbols) + + HEBREW_ISRAEL & HEBREW_QWERTY (_ becomes ־ Maqaf) + index>middl>ring>pin>pink2> + -*- <|> //(toggle) Access on _FUN + BASExxxxx!xxxxx@xxxxx#xxxxx$xxxxx%xxxxx|x^xxxxx&xxxxx*xxxxx(xxxx)xxxxxxxDel + Tab+LCtlx1!xxxx2@xxxx3#xxxx4$xxxx5%xxxx|x6^xxxx7&xxxx8*xxxx9(xxx0)xx`~+RCtl + -+LShtxxx[{xxxx]}xxxx-_xxxx\|xxxx=+xxxx|x+xxxxx|xxxxx־xxxxx{xxxxx}xxx~+RSht + ^ // Only difference with Qwerty + --------------------------------------------------------------------------- + Left+LAlt ___ ___ Ent | . ___ RGUI Right+RAlt + -*- <|> -*- //(hold) Access on _DEF_BASE + <1 ± <2 <3 <4 | 4> 3> 2> ± 1> + ^ ^ + (LGUI) (_MOV) + + + HEBREW_DVORAK (Same as standard Dvorak) + index>middl>ring>pin>pink2> + -*- <|> //(toggle) Access on _FUN + BASE ! @ # $ % | ^ & * ( ) Del + Tab+LCtl 1! 2@ 3# 4$ 5% | 6^ 7& 8* 9( 0) `~+RCtl + -+LSht [{ ]} /? \| =+ | + | ? { } ~+RSht + --------------------------------------------------------------------------- + (…) +- - - diff --git a/keyboards/thevankeyboards/minivan/keymaps/josjoha/base_numpad.h b/keyboards/thevankeyboards/minivan/keymaps/josjoha/base_numpad.h index 86baf95a59..d4440721ff 100644 --- a/keyboards/thevankeyboards/minivan/keymaps/josjoha/base_numpad.h +++ b/keyboards/thevankeyboards/minivan/keymaps/josjoha/base_numpad.h @@ -18,6 +18,8 @@ along with this program. If not, see . * */ +#pragma once + // --------------------------------------v--------------------------------------- // Configuration: // --------------------------------------v--------------------------------------- diff --git a/keyboards/thevankeyboards/minivan/keymaps/josjoha/base_qwerty_basearrow.h b/keyboards/thevankeyboards/minivan/keymaps/josjoha/base_qwerty_basearrow.h index 74aa563b42..386a6e593a 100644 --- a/keyboards/thevankeyboards/minivan/keymaps/josjoha/base_qwerty_basearrow.h +++ b/keyboards/thevankeyboards/minivan/keymaps/josjoha/base_qwerty_basearrow.h @@ -18,6 +18,8 @@ along with this program. If not, see . * */ +#pragma once + // --------------------------------------v--------------------------------------- // Configuration: // --------------------------------------v--------------------------------------- diff --git a/keyboards/thevankeyboards/minivan/keymaps/josjoha/keymap.c b/keyboards/thevankeyboards/minivan/keymaps/josjoha/keymap.c index 09a9b7d93d..057561a473 100644 --- a/keyboards/thevankeyboards/minivan/keymaps/josjoha/keymap.c +++ b/keyboards/thevankeyboards/minivan/keymaps/josjoha/keymap.c @@ -146,7 +146,7 @@ bool led_middle_on = TRUE; // Set to off later, if startup setting is off. bool isolate_trigger = FALSE; // detects if _FUN layer move was pressed, and no other key (no normal use of Shift). bool capslock; // keeps track of capslock state bool numlock; // keeps track of numlock state -layer_state_t state_recall; // We are calling the function set_led_colors_ from this file as well. +//layer_state_t state_recall; // We are calling the function set_led_colors_ from this file as well. // speed measuring bool speed_measure = SPEED_INIT_VALUE; // feature activated or not on startup uint32_t speed_counttime; // counts the time @@ -289,8 +289,8 @@ void speed_led (int speed) { // do this in one place to handle left/right leds being off here void isolate_rgblight_set () { -# ifdef RGBLIGHT_ENABLE +# ifdef RGBLIGHT_ENABLE if (!leds_on) { // left/right leds are off // overwrite previously colors uint8_t led0r = 0; uint8_t led0g = 0; uint8_t led0b = 0; @@ -305,8 +305,8 @@ void isolate_rgblight_set () { setrgb(led2r, led2g, led2b, (LED_TYPE *)&led[2]); // Led 2 } rgblight_set (); - # endif + } @@ -335,7 +335,7 @@ void indicate_fun_stay (void) { // _RAR layer leds -// It is a function because this is called when the Base layer OTHER_BASE key is pressed +// It is a function because this is also called when the Base layer OTHER_BASE key is pressed void indicate_base (void) { # ifdef RGBLIGHT_ENABLE @@ -614,6 +614,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { # include "./base_numpad.c" // Numbers pad # endif +// * Hebrew * +# if defined(BASE_HEBREW__DEF_BASE) || defined(BASE_HEBREW__ALT_BASE) +# include "./base_hebrew.c" // Hebrew +# endif + // // ⬇ insert your ./base_YOUR_KEYMAP.c #include here: diff --git a/keyboards/thevankeyboards/minivan/keymaps/josjoha/minifan_config_compact.h b/keyboards/thevankeyboards/minivan/keymaps/josjoha/minifan_config_compact.h index 89d426b140..932acf2a82 100644 --- a/keyboards/thevankeyboards/minivan/keymaps/josjoha/minifan_config_compact.h +++ b/keyboards/thevankeyboards/minivan/keymaps/josjoha/minifan_config_compact.h @@ -14,25 +14,29 @@ GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . - * © 2020,2021 by Jos Boersema +* © 2020,2021 by Jos Boersema */ +#pragma once + /* * If MINIFAN_CONFIG_COMPACT in ./user_config.h ⬇ */ //#define BASE_QWERTY__DEF_BASE //#define BASE_QWERTY__ALT_BASE -//#define BASE_QWERTY_BASEARROW__DEF_BASE -//#define BASE_QWERTY_BASEARROW__ALT_BASE +//#define BASE_QWERTY_BASEARROW__DEF_BASE // ➡ base_qwerty_basearrow.h +//#define BASE_QWERTY_BASEARROW__ALT_BASE // ➡ base_qwerty_basearrow.h #define BASE_DVORAK__DEF_BASE //#define BASE_DVORAK__ALT_BASE - #define BASE_DVORAK_DESCRAMBLE__ALT_BASE +//#define BASE_DVORAK_DESCRAMBLE__ALT_BASE //#define BASE_COLEMAK__DEF_BASE //#define BASE_COLEMAK__ALT_BASE //#define BASE_WORKMAN__DEF_BASE //#define BASE_WORKMAN__ALT_BASE -//#define BASE_NUMPAD__ALT_BASE +//#define BASE_NUMPAD__ALT_BASE // ➡ base_numpad.h +//#define BASE_HEBREW__DEF_BASE // ➡ base_hebrew.h + #define BASE_HEBREW__ALT_BASE // ➡ base_hebrew.h //#define MINIFAN_SINGLE_LAYOUT @@ -66,7 +70,7 @@ along with this program. If not, see . #define ARROWS_TRIANGLE //#define VI_SWITCHERYDOO -//#define NUMPAD_COMMON_SQUARE + #define NUMPAD_COMMON_SQUARE #define SPEED_COUNTDOWN 25 #define SPEED_HUE_STEP 8 @@ -100,5 +104,5 @@ along with this program. If not, see . #define FULL_DRA_4THROW #define FULL_BON_4THROW - #define LEDS_OFF_BASE_DEF - #define LEDS_OFF_BASE_ALT +//#define LEDS_OFF_BASE_DEF +//#define LEDS_OFF_BASE_ALT diff --git a/keyboards/thevankeyboards/minivan/keymaps/josjoha/readme.md b/keyboards/thevankeyboards/minivan/keymaps/josjoha/readme.md index 1d2ad90fea..a535a6f1f9 100644 --- a/keyboards/thevankeyboards/minivan/keymaps/josjoha/readme.md +++ b/keyboards/thevankeyboards/minivan/keymaps/josjoha/readme.md @@ -3,7 +3,7 @@ A 40% keyboard made first by TheVan Keyboards _https://thevankeyboards.com_ now taken over by TKC _https://thekey.company_ -![Minivan layout all](http://socialism.nl/misc/minivan/minivan-all-layers-visualization_vc.jpg) +![Minivan layout all](http://socialism.nl/misc/minivan/minivan-all-layers-visualization_vd.jpg) Table of Contents ================= @@ -22,6 +22,8 @@ Table of Contents 3.1.6 Workman 3.2 Special layouts 3.2.1 Numbers pad + 3.3 Non-Latin languages + 3.3.1 Hebrew 4 The common system 4.1 Layer access 4.2 Layout in graphics @@ -108,7 +110,7 @@ the western European group of languages, native from the keyboard. This keymap might not function as expected if you want to use a different keyboard language setting in your operating system. -See also chapter 6 _Language support_. +See also chapter 7 _Language support_. 2 'make' example ================ @@ -195,6 +197,17 @@ with a normal layout on ‛Default’. How this works is explained below. For the readme about the Numpad version, see ➡ ![base_numpad.md](./base_numpad.md) ⬅ +3.3 Non-Latin languages +======================= + +3.3.1 Hebrew +------------ + +![Minivan layout impression](http://socialism.nl/misc/minivan/minivan_keycapview_hebrew_vc.jpg) + +For the readme about the Hebrew version, see ➡ ![base_hebrew.md](./base_hebrew.md) ⬅ + + 4 The common system =================== @@ -1053,7 +1066,9 @@ You can remove the layers `_ACC`, `_DRA` and/or `_BON` (see You can remove a set of symbols from one or more of Unicode layers, such as not having box drawing characters on `_BON`, or no sub-script -numbers on `_DRA`. +numbers on `_DRA` (see ![./user_config.h](./user_config.h) under +`Eviscerations ②/②` ) ⬅ + 12 Key associations =================== diff --git a/keyboards/thevankeyboards/minivan/keymaps/josjoha/unicode_hebrew.h b/keyboards/thevankeyboards/minivan/keymaps/josjoha/unicode_hebrew.h new file mode 100644 index 0000000000..881a80884b --- /dev/null +++ b/keyboards/thevankeyboards/minivan/keymaps/josjoha/unicode_hebrew.h @@ -0,0 +1,116 @@ +/* + * License (GPL): + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . + + * Author: © 2021 by Jos Boersema + * + */ + +#pragma once + +/* An amount of Unicode #defines + * - hebrew + */ + + // +#define HB_ALEF 0x05D0 // 'HB' for 'Hebrew', "ALEF" for Alef : א +#define HB_BET 0x05D1 // " , "BET" for Bet : ב +#define HB_GIMEL 0x05D2 // " , "GIMEL" for Gimel : ג +#define HB_DALET 0x05D3 // " , "DALET" for Daled : ד +#define HB_HE 0x05D4 // " , "HE" for He : ה +#define HB_VAV 0x05D5 // " , "VAV" for Vav : ו +#define HB_ZAYIN 0x05D6 // " , "ZAYIN" for Zayin : ז +#define HB_GET 0x05D7 // " , "HET" for Het : ח +#define HB_TET 0x05D8 // " , "TET" for Tet : ט +#define HB_YOD 0x05D9 // " , "YOD" for Yod : י +#define HB_KAFS 0x05DA // " , "KAFS" for Kaf sofiet : ך +#define HB_KAF 0x05DB // " , "KAF" for Kaf : כ +#define HB_LAMED 0x05DC // " , "LAMED" for Lamed : ל +#define HB_MEMS 0x05DD // " , "MEMS" for Mem sofiet : ם +#define HB_MEM 0x05DE // " , "MEM" for Mem : מ +#define HB_NUNS 0x05DF // " , "NUNS" for Nun sofiet : ן +#define HB_NUN 0x05E0 // " , "NUN" for Nun : נ +#define HB_SAMEG 0x05E1 // " , "SAMEG" for Sameg : ס +#define HB_AYIN 0x05E2 // " , "AYIN" for Ayin : ע +#define HB_PES 0x05E3 // " , "PES" for Pe sofiet : ף +#define HB_PE 0x05E4 // " , "PE" for Pe : פ +#define HB_TSDIS 0x05E5 // " , "TSDIS" for Tsadi sofiet: ץ +#define HB_TSADI 0x05E6 // " , "TSADI" for Tsadi : צ +#define HB_QOF 0x05E7 // " , "QOF" for Qof : ק +#define HB_RESH 0x05E8 // " , "RESH" for Resh : ר +#define HB_SHIN 0x05E9 // " , "SHIN" for Shin : ש +#define HB_TAV 0x05EA // " , "TAV" for Tav : ת +#define HB_MAQAF 0x05be // " , "MAQAF" for Maqaf : ־ + +// Yiddish digraphs: +//#define HB_D_VAV 0x05F0 // " , "D_VAV" for double Van : װ +//#define HB_VAVYD 0x05F1 // " , "VAVYD" for Vav Yod : ױ +//#define HB_D_YOD 0x05F2 // " , "D_YOD" for double Yod : ײ + +// special +#define HB_RLM 0x200F // " , "RLM" for Right-Left-Mark: +#define HB_LRM 0x200E // " , "LRM" for Left-Right-Mark: + + +// The below are displacing symbols on other layers, some of which are quite obscure +// and end up being unused. They are compiled based on a #define. +// These where reported as symbols present on hebrew keyboards: +// U+05F3 : HEBREW PUNCTUATION GERESH +// U+20AC : EURO SIGN +// U+20AA : NEW SHEQEL SIGN {shekel} +// U+00B0 : DEGREE SIGN +// U+05AB : HEBREW ACCENT OLE +// U+05BD : HEBREW POINT METEG {siluq} +// U+00D7 : MULTIPLICATION SIGN {z notation Cartesian product} +// U+200E : LEFT-TO-RIGHT MARK [LRM] +// U+200F : RIGHT-TO-LEFT MARK [RLM] +// U+05BE : HEBREW PUNCTUATION MAQAF +// U+2013 : EN DASH +// U+05C2 : HEBREW POINT SIN DOT +// U+05C1 : HEBREW POINT SHIN DOT +// U+05B8 : HEBREW POINT QAMATS +// U+05F0 : HEBREW LIGATURE YIDDISH DOUBLE VAV {tsvey vovn} +// U+05B9 : HEBREW POINT HOLAM +// U+05B7 : HEBREW POINT PATAH +// U+05B2 : HEBREW POINT HATAF PATAH +// U+05F1 : HEBREW LIGATURE YIDDISH VAV YOD +// U+05F2 : HEBREW LIGATURE YIDDISH DOUBLE YOD {tsvey yudn} +// U+05B4 : HEBREW POINT HIRIQ +// U+201D : RIGHT DOUBLE QUOTATION MARK {double comma quotation mark} +// U+201E : DOUBLE LOW-9 QUOTATION MARK {low double comma quotation mark} +// U+05F4 : HEBREW PUNCTUATION GERSHAYIM +// U+05B6 : HEBREW POINT SEGOL +// U+05B1 : HEBREW POINT HATAF SEGOL +// U+05B5 : HEBREW POINT TSERE +// U+2019 : RIGHT SINGLE QUOTATION MARK {single comma quotation mark} +// U+201A : SINGLE LOW-9 QUOTATION MARK {low single comma quotation mark} +// U+00F7 : DIVISION SIGN {obelus} +// U+05BA : HEBREW POINT HOLAM HASER FOR VAV +// U+200D : ZERO WIDTH JOINER [ZWJ] +// U+201C : LEFT DOUBLE QUOTATION MARK {double turned comma quotation mark} +// U+201D : RIGHT DOUBLE QUOTATION MARK {double comma quotation mark} +// U+034F : COMBINING GRAPHEME JOINER [CGJ] +// U+05C6 : HEBREW PUNCTUATION NUN HAFUKHA +// U+200C : ZERO WIDTH NON-JOINER [ZWNJ] +// U+2018 : LEFT SINGLE QUOTATION MARK {single turned comma quotation mark} +// U+2019 : RIGHT SINGLE QUOTATION MARK {single comma quotation mark} +// Note: many modifiers probably only work with a hebrew language setting on the computer +// operating system. As Unicode, it would print a disconnected diacretical symbol. + +// Geresh +#define HB_GERSH 0x05F3 // " , "GERSH" for Geresh : +#define HB_GRSHM 0x05F4 // " , "GRSHM" for Gershayim : +// Currency +#define HB_SHEKL 0x20AA // " , "SHEKL" for shekel : diff --git a/keyboards/thevankeyboards/minivan/keymaps/josjoha/unicode_macros.c b/keyboards/thevankeyboards/minivan/keymaps/josjoha/unicode_macros.c index d711c86f9b..cfcf765a08 100644 --- a/keyboards/thevankeyboards/minivan/keymaps/josjoha/unicode_macros.c +++ b/keyboards/thevankeyboards/minivan/keymaps/josjoha/unicode_macros.c @@ -24,6 +24,7 @@ along with this program. If not, see . #include "./unicode_macros.h" #include "./unicode_weurope.h" +#include "./unicode_hebrew.h" // Definition of ƒ (Dutch currency symbol). // Best changed in user_config.h, if you like a Euro symbol instead. @@ -174,109 +175,150 @@ enum custom_keycodes { // The _ACC layer, additional Unicode. # ifndef REMOVE_ACC // This cuts out the whole _ACC layer. - XP_ACC_AA , - XP_ACC_AB , - XP_ACC_AC , - XP_ACC_AD , - XP_ACC_AE , - XP_ACC_AF , - XP_ACC_AG , - XP_ACC_AH , - XP_ACC_AI , - XP_ACC_AJ , - XP_ACC_BA , - XP_ACC_BB , - XP_ACC_BC , - XP_ACC_BD , - XP_ACC_BE , - XP_ACC_BF , - XP_ACC_BG , - XP_ACC_BH , - XP_ACC_BI , - XP_ACC_BJ , - XP_ACC_BK , - XP_ACC_CA , - XP_ACC_CB , - XP_ACC_CC , - XP_ACC_CD , - XP_ACC_CE , - XP_ACC_CF , - XP_ACC_CG , - XP_ACC_CH , - XP_ACC_CI , - XP_ACC_CJ , + XP_ACC_AA, + XP_ACC_AB, + XP_ACC_AC, + XP_ACC_AD, + XP_ACC_AE, + XP_ACC_AF, + XP_ACC_AG, + XP_ACC_AH, + XP_ACC_AI, + XP_ACC_AJ, + XP_ACC_BA, + XP_ACC_BB, + XP_ACC_BC, + XP_ACC_BD, + XP_ACC_BE, + XP_ACC_BF, + XP_ACC_BG, + XP_ACC_BH, + XP_ACC_BI, + XP_ACC_BJ, + XP_ACC_BK, + XP_ACC_CA, + XP_ACC_CB, + XP_ACC_CC, + XP_ACC_CD, + XP_ACC_CE, + XP_ACC_CF, + XP_ACC_CG, + XP_ACC_CH, + XP_ACC_CI, + XP_ACC_CJ, # endif // REMOVE_ACC # ifndef REMOVE_DRA // This cuts out the whole _DRA layer // The _DRA layer, additional Unicode. - XP_DRA_AA , - XP_DRA_AB , - XP_DRA_AC , - XP_DRA_AD , - XP_DRA_AE , - XP_DRA_AF , - XP_DRA_AG , - XP_DRA_AH , - XP_DRA_AI , - XP_DRA_AJ , - XP_DRA_BA , - XP_DRA_BB , - XP_DRA_BC , - XP_DRA_BD , - XP_DRA_BE , - XP_DRA_BF , - XP_DRA_BG , - XP_DRA_BH , - XP_DRA_BI , - XP_DRA_BJ ,// XP_DRA_BK , // no 'BK' key definition on this layer - XP_DRA_CA , - XP_DRA_CB , - XP_DRA_CC , - XP_DRA_CD , - XP_DRA_CE , - XP_DRA_CF , + XP_DRA_AA, + XP_DRA_AB, + XP_DRA_AC, + XP_DRA_AD, + XP_DRA_AE, + XP_DRA_AF, + XP_DRA_AG, + XP_DRA_AH, + XP_DRA_AI, + XP_DRA_AJ, + XP_DRA_BA, + XP_DRA_BB, + XP_DRA_BC, + XP_DRA_BD, + XP_DRA_BE, + XP_DRA_BF, + XP_DRA_BG, + XP_DRA_BH, + XP_DRA_BI, + XP_DRA_BJ,// XP_DRA_BK , // no 'BK' key definition on this layer + XP_DRA_CA, + XP_DRA_CB, + XP_DRA_CC, + XP_DRA_CD, + XP_DRA_CE, + XP_DRA_CF, # endif // REMOVE_DRA - XP_DRA_CG , // Needed for ☑ on Unicode tester key in _RAR + XP_DRA_CG, // Needed for ☑ on Unicode tester key in _RAR # ifndef REMOVE_DRA // This cuts out the whole _DRA layer - XP_DRA_CH , - XP_DRA_CI , - XP_DRA_CJ , + XP_DRA_CH, + XP_DRA_CI, + XP_DRA_CJ, # endif // REMOVE_DRA // The _BON layer, additional Unicode. # ifndef REMOVE_BON // Removes this layer entirely, if set. - XP_BON_AA , - XP_BON_AB , - XP_BON_AC , - XP_BON_AD , - XP_BON_AE , - XP_BON_AF , - XP_BON_AG , - XP_BON_AH , - XP_BON_AI , - XP_BON_AJ , - XP_BON_BA , - XP_BON_BB , - XP_BON_BC , - XP_BON_BD , - XP_BON_BE , - XP_BON_BF , - XP_BON_BG , - XP_BON_BH , - XP_BON_BI , - XP_BON_BJ , - XP_BON_BK , - XP_BON_CA , - XP_BON_CB , - XP_BON_CC , - XP_BON_CD , - XP_BON_CE , - XP_BON_CF , - XP_BON_CG , - XP_BON_CH , - XP_BON_CI , - XP_BON_CJ , + XP_BON_AA, + XP_BON_AB, + XP_BON_AC, + XP_BON_AD, + XP_BON_AE, + XP_BON_AF, + XP_BON_AG, + XP_BON_AH, + XP_BON_AI, + XP_BON_AJ, + XP_BON_BA, + XP_BON_BB, + XP_BON_BC, + XP_BON_BD, + XP_BON_BE, + XP_BON_BF, + XP_BON_BG, + XP_BON_BH, + XP_BON_BI, + XP_BON_BJ, + XP_BON_BK, + XP_BON_CA, + XP_BON_CB, + XP_BON_CC, + XP_BON_CD, + XP_BON_CE, + XP_BON_CF, + XP_BON_CG, + XP_BON_CH, + XP_BON_CI, + XP_BON_CJ, # endif // REMOVE_BON + +// Hebrew +# if defined(BASE_HEBREW__DEF_BASE) || defined(BASE_HEBREW__ALT_BASE) + XP_HEB_AA, + XP_HEB_AB, + XP_HEB_AC, + XP_HEB_AD, + XP_HEB_AE, + XP_HEB_AF, + XP_HEB_AG, + XP_HEB_AH, + XP_HEB_AI, + XP_HEB_AJ, + XP_HEB_BA, + XP_HEB_BB, + XP_HEB_BC, + XP_HEB_BD, + XP_HEB_BE, + XP_HEB_BF, + XP_HEB_BG, + XP_HEB_BH, + XP_HEB_BI, + XP_HEB_BJ, +# if defined(HEBREW_ISRAEL) + XP_HEB_BK, // +# endif + XP_HEB_CA, + XP_HEB_CB, + XP_HEB_CC, + XP_HEB_CD, + XP_HEB_CE, + XP_HEB_CF, + XP_HEB_CG, +# if defined(HEBREW_ISRAEL) || defined(HEBREW_DVORAK) + XP_HEB_CH, + XP_HEB_CI, + XP_HEB_CJ, +# endif + XP_HEB_MQF, // ־ +# endif //BASE_HEBREW__* + }; // Pre-existing function, called for every key up and down. @@ -1244,12 +1286,17 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { case LEDS_ON: // Toggles left/right leds on or off if (record->event.pressed) { // key down + +# ifdef RGBLIGHT_ENABLE if (leds_on == FALSE) { leds_on = TRUE; }else{ leds_on = FALSE; } + set_led_colors_ (state_recall); // Update leds } +# endif + break; # ifdef LEDS_OFF_BASE_DEF // This messes with led effect on/off, so we need to track the state of this setting now. @@ -1652,11 +1699,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { case XP_DRA_AA: // because '", the opening „“ at the ‛open’ of the keyboard (left/up) if (record->event.pressed) { // key down -# ifdef FULL_DRA_4THROW unicode_hex2output (CS_DQUHR, CS_DQUL);// “ „ -# else - unicode_hex2output_single (CS_DQUHR);// “ -# endif } break; @@ -1664,11 +1707,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { case XP_DRA_AB: // because to the right of opening “, ≤ on < if (record->event.pressed) { // key down -# ifdef FULL_DRA_4THROW unicode_hex2output (CS_DQUH, CS_ELTHAN);// ” ≤ -# else - unicode_hex2output_single (CS_DQUH);// ” -# endif } break; @@ -1676,11 +1715,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { case XP_DRA_AC: // because this is where the £ is on an English keyboard, on 'any' money symbols ¤; ≥ on > if (record->event.pressed) { // key down -# ifdef FULL_DRA_4THROW unicode_hex2output (CS_POUND, CS_EGTHAN);// £ ≥ -# else - unicode_hex2output_single (CS_POUND);// £ -# endif } break; @@ -1690,6 +1725,8 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { # ifdef FULL_DRA_4THROW unicode_hex2output (CS_NONE, CS_CENT);// ∅ ¢ +# else + unicode_hex2output_single (CS_NONE);// ∅ ¢ # endif } @@ -1710,11 +1747,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { case XP_DRA_AF: // Because left of 🙂, on top of ★ if (record->event.pressed) { // key down -# ifdef FULL_DRA_4THROW unicode_hex2output (CS_FLEUR, CS_HEART);// ❦ ♥ -# else - unicode_hex2output_single (CS_HEART);// ♥ -# endif } break; @@ -1722,9 +1755,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { case XP_DRA_AG: // because 😊 ⍨ if (record->event.pressed) { // key down -# ifdef FULL_DRA_4THROW unicode_hex2output (CS_SMIL, CS_SAD_);// 🙂 🙁 -# endif } break; @@ -1732,9 +1763,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { case XP_DRA_AH: // because «no reason», next to 😊 (emoticons) if (record->event.pressed) { // key down -# ifdef FULL_DRA_4THROW unicode_hex2output (CS_THUP, CS_THDN);// 👍 👎 -# endif } break; @@ -2343,6 +2372,299 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { break; # endif // REMOVE_BON + +// Hebrew +# if defined(BASE_HEBREW__DEF_BASE) || defined(BASE_HEBREW__ALT_BASE) +// The layout follows a standard hebrew keyboard, with the exception +// of ק, which is displaced by “.>” copied from the Dvorak layout. + + // HEBREW_DVORAK + // These letters on the upper left follow Dvorak layout. + // The reason is space on the device: these are not macros. + // Also: typing compatibility between Dvorak and Hebrew + // for these similar/same symbols: ,<.>. Idealy these symbols + // should be the hebrew variation, if space allows it. + +# if defined(HEBREW_ISRAEL) + + case XP_HEB_AA: // + if (record->event.pressed) { // key down + // These shifts-up seem to work on GNU/Debian/Linux, otherwise it prints ':' + if (shift_ison) send_string ( SS_UP(X_RSFT) SS_UP(X_LSFT) ";" ); // moved here from on standard hebrew + else send_string ("/");// + } break; + + case XP_HEB_AB: // + if (record->event.pressed) { // key down + unicode_hex2output_single (HB_GERSH);// ׳ + } + break; + + case XP_HEB_AC: // + if (record->event.pressed) { // key down + unicode_hex2output_single (HB_QOF);// ק + } + break; + +# elif defined(HEBREW_QWERTY) + + case XP_HEB_AA: // + if (record->event.pressed) { // key down + unicode_hex2output_single (HB_TAV);// ת + } + break; + + case XP_HEB_AB: // + if (record->event.pressed) { // key down + unicode_hex2output_single (HB_TSDIS);// ץ + } + break; + + case XP_HEB_AC: // + if (record->event.pressed) { // key down + unicode_hex2output_single (HB_QOF);// ק + } + break; + +# endif // #HEBREW_* + + case XP_HEB_AD: // + if (record->event.pressed) { // key down + unicode_hex2output_single (HB_RESH);// ר + } + break; + + case XP_HEB_AE: // + if (record->event.pressed) { // key down + unicode_hex2output_single (HB_ALEF);// א + + } + break; + + case XP_HEB_AF: // + if (record->event.pressed) { // key down + unicode_hex2output_single (HB_TET);// ט + } + break; + + case XP_HEB_AG: // + if (record->event.pressed) { // key down + unicode_hex2output_single (HB_VAV);// ו + } + break; + + case XP_HEB_AH: // + if (record->event.pressed) { // key down + unicode_hex2output_single (HB_NUNS);// ן + } + break; + + case XP_HEB_AI: + if (record->event.pressed) { // key down + +# if defined(HEBREW_ISRAEL) + // The logic is that it mirrors '", “„, ”≤, ‛’ in Dvorak Base and other layers. + // Therefore the little and ring fingers are used. Mirroring ━─ and ┄┅ on DRA_ + // layer, the outside on the keyboard is “big/fat”, the inside is “small/thin”, + // like something protected in a shell. Hence: ……׳״ + unicode_hex2output_single (HB_MEMS);// ם // ׳ is located elsewhere +# elif defined(HEBREW_QWERTY) || defined(HEBREW_DVORAK) + unicode_hex2output (HB_MEMS, HB_GERSH);// ם׳ +# endif + + } + break; + + case XP_HEB_AJ: // + if (record->event.pressed) { // key down + +# if defined(HEBREW_ISRAEL) + unicode_hex2output_single (HB_PE);// פ // ״ is located elsewhere +# elif defined(HEBREW_QWERTY) || defined(HEBREW_DVORAK) + unicode_hex2output (HB_PE, HB_GRSHM);// פ״ +# endif + + } + break; + + // ------------------------- row 3 + case XP_HEB_BA: // + if (record->event.pressed) { // key down + unicode_hex2output_single (HB_SHIN);// ש + } + break; + + case XP_HEB_BB: // + if (record->event.pressed) { // key down + unicode_hex2output_single (HB_DALET);// ד + } + break; + + case XP_HEB_BC: //Right-left-mark to the first free strong homerow finger on the left (middle) + if (record->event.pressed) { // key down + unicode_hex2output (HB_GIMEL, HB_RLM);// ג {RLM} + } + break; + + case XP_HEB_BD: // The logic is that כ is the same key as 4 on another layer, which connects + // with $, and other currencies in the same region (ƒ£). + if (record->event.pressed) { // key down + unicode_hex2output (HB_KAF, HB_SHEKL);// כ₪ + } + break; + + case XP_HEB_BE: // + if (record->event.pressed) { // key down + unicode_hex2output_single (HB_AYIN);// ע + } + break; + + case XP_HEB_BF: // + if (record->event.pressed) { // key down + unicode_hex2output_single (HB_YOD);// י + } + break; + + case XP_HEB_BG: // + if (record->event.pressed) { // key down + unicode_hex2output_single (HB_GET);// ח + } + break; + + case XP_HEB_BH: // + if (record->event.pressed) { // key down + unicode_hex2output (HB_LAMED, HB_LRM);// ל {LRM} + } + break; + + case XP_HEB_BI: // + if (record->event.pressed) { // key down + unicode_hex2output_single (HB_KAFS);// ך + } + break; + + case XP_HEB_BJ: // + if (record->event.pressed) { // key down + +# if defined(HEBREW_ISRAEL) || defined(HEBREW_QWERTY) + if (shift_ison) send_string (":"); // : (the hebrew eqquivalent is apparently almost never used, and this saves space) + else unicode_hex2output_single (HB_PES);// ף +# elif defined(HEBREW_DVORAK) + unicode_hex2output_single (HB_PES);// ף +# endif + + } + break; + +# if defined(HEBREW_ISRAEL) + case XP_HEB_BK: // + if (record->event.pressed) { // key down + if (shift_ison) unicode_hex2output_single (HB_GRSHM);// ״ + else send_string (","); // comma + } + break; +# endif + + case XP_HEB_MQF: // ־ Maqaf + if (record->event.pressed) { // key down + unicode_hex2output_single (HB_MAQAF);// ־ + } + break; + + // ------------------------- row 2 + case XP_HEB_CA: // + if (record->event.pressed) { // key down +// Hebrew harmonization + ':' +# if defined(HEBREW_ISRAEL) || defined(HEBREW_QWERTY) + unicode_hex2output_single (HB_ZAYIN);// ז +# elif defined(HEBREW_DVORAK) + if (shift_ison) send_string (":"); // + else unicode_hex2output_single (HB_ZAYIN);// ז +# endif + } + break; + + case XP_HEB_CB: // + if (record->event.pressed) { // key down + unicode_hex2output_single (HB_SAMEG);// ס + } + break; + + case XP_HEB_CC: // + if (record->event.pressed) { // key down + unicode_hex2output_single (HB_BET);// ב + } + break; + + case XP_HEB_CD: // + if (record->event.pressed) { // key down + unicode_hex2output_single (HB_HE);// ה + } + break; + + case XP_HEB_CE: // + if (record->event.pressed) { // key down + unicode_hex2output_single (HB_NUN);// נ + } + break; + + case XP_HEB_CF: // + if (record->event.pressed) { // key down + unicode_hex2output_single (HB_MEM);// מ + } + break; + + case XP_HEB_CG: // + if (record->event.pressed) { // key down + unicode_hex2output_single (HB_TSADI);// צ + } + break; + +# if defined(HEBREW_ISRAEL) || defined(HEBREW_DVORAK) + case XP_HEB_CH: // + if (record->event.pressed) { // key down + +# if defined(HEBREW_ISRAEL) + if (shift_ison) send_string ("<"); // + else unicode_hex2output_single (HB_TAV);// ת +# else // HEBREW_DVORAK + unicode_hex2output_single (HB_TAV);// ת +# endif + + } + break; + + case XP_HEB_CI: // + if (record->event.pressed) { // key down + +# if defined(HEBREW_ISRAEL) + if (shift_ison) send_string (">"); // + else unicode_hex2output_single (HB_TSDIS);// ץ +# else // HEBREW_DVORAK + unicode_hex2output_single (HB_TSDIS);// ץ +# endif + + } + break; + + case XP_HEB_CJ: // anomaly + if (record->event.pressed) { // key down + +# if defined(HEBREW_ISRAEL) + if (shift_ison) send_string ("?"); // + else send_string ("."); // +# else // HEBREW_DVORAK + unicode_hex2output_single (HB_QOF);// ק +# endif + + } + break; +# endif // HEBREW_* + + // HB_D_VAV, + // HB_VAVYD, + // HB_D_YOD, +# endif // Hebrew Base layer } return true; diff --git a/keyboards/thevankeyboards/minivan/keymaps/josjoha/unicode_macros.h b/keyboards/thevankeyboards/minivan/keymaps/josjoha/unicode_macros.h index 5969525ca9..3543315911 100644 --- a/keyboards/thevankeyboards/minivan/keymaps/josjoha/unicode_macros.h +++ b/keyboards/thevankeyboards/minivan/keymaps/josjoha/unicode_macros.h @@ -30,6 +30,7 @@ static uint16_t key_timer; // Used in _DDL to differentiate layer switching in h short duo_press_nsy_dra = 0; // This remembers how many of the duo-press keys are being pressed: _NSY / _DRA layers short duo_press_acc_bon = 0; // This remembers how many of the duo-press keys are being pressed: _ACC / _BON layers +layer_state_t state_recall; // Also used when leds on/off is pressed void deactivate_all_but (int layer); void activate_this_layer (int layer); @@ -40,5 +41,6 @@ void speed_led (int speed); void indicate_fun_stay (void); int write_number (long int input, short divide10); void isolate_rgblight_set (void); +void set_led_colors_ (layer_state_t state); diff --git a/keyboards/thevankeyboards/minivan/keymaps/josjoha/unicode_weurope.h b/keyboards/thevankeyboards/minivan/keymaps/josjoha/unicode_weurope.h index 56a50b80c5..f4a5bdab72 100644 --- a/keyboards/thevankeyboards/minivan/keymaps/josjoha/unicode_weurope.h +++ b/keyboards/thevankeyboards/minivan/keymaps/josjoha/unicode_weurope.h @@ -18,6 +18,8 @@ along with this program. If not, see . * */ +#pragma once + /* An amount of Unicode #defines * - western european accented characters * - various punctuation symbols, different number formats, math symbols, other symbols. diff --git a/keyboards/thevankeyboards/minivan/keymaps/josjoha/user_config.h b/keyboards/thevankeyboards/minivan/keymaps/josjoha/user_config.h index 293fd15a06..6552c9a49f 100644 --- a/keyboards/thevankeyboards/minivan/keymaps/josjoha/user_config.h +++ b/keyboards/thevankeyboards/minivan/keymaps/josjoha/user_config.h @@ -18,6 +18,7 @@ along with this program. If not, see . * */ +#pragma once // ------------------------------------- ⬇ -------------------------------------- // Configuration: @@ -47,6 +48,7 @@ along with this program. If not, see . • Colemak • Workman • Numpad + • Hebrew -2- ➡ Eviscerations ( ① / ② ) ⬅ • Single layout @@ -146,6 +148,7 @@ along with this program. If not, see . // _Activate_ one of these two, _remove_ the other. //#define BASE_QWERTY_BASEARROW__DEF_BASE // _Activate_ if you want Qwerty with Base arrows on the ‛Default’ spot //#define BASE_QWERTY_BASEARROW__ALT_BASE // _Activate_ if you want Qwerty with Base arrows on the ‛Alternate’ spot + // ➡ ➡ ➡ This Base layer has configuration options at the top of its file. See ./ base_qwerty_basearrow.h // // • Dvorak // (a regular Dvorak layout) @@ -174,7 +177,14 @@ along with this program. If not, see . // (a numerical keypad, one for left hand and one for right hand) // _Activate_ to get Numpad on Alternate. There is no option for Numpad on ‛Default’ base. #define BASE_NUMPAD__ALT_BASE // _Activate_ if you want Numpad on the ‛Alternate’ spot - // ➡ ➡ ➡ This Base layer has configuration options at the top of its file. See ./base_numpad.c + // ➡ ➡ ➡ This Base layer has configuration options at the top of its file. See ./base_numpad.h + // + // • Hebrew + // (a simple Hebrew layout) + // _Activate_ one of these two, _remove_ the other. +//#define BASE_HEBREW__DEF_BASE // _Activate_ if you want Hebrew on the ‛Default’ spot +//#define BASE_HEBREW__ALT_BASE // _Activate_ if you want Hebrew on the ‛Alternate’ spot + // ➡ ➡ ➡ This Base layer has configuration options at the top of its file. See ./base_hebrew.h // /* -2- ➡ Eviscerations ( ① / ② ) ⬅ */ @@ -517,12 +527,12 @@ along with this program. If not, see . // Thinned out 2nd row: LSht ━ ─ ° • … ☐ ☑ ☑ ¿¡ ┄ ┅ RSht // #define FULL_DRA_4THROW // _Activate_ to have symbols on all unshifted + shifted positions on _DRA, 4th row. - // Affected 4th row: „ ≤ ≥ ∅ ¢ ƒ ❦ 🙂 🙁 👍 👎 ⁽ ₍ ⁾ ₎ + // Affected 4th row: ¢ ƒ ⁽ ₍ ⁾ ₎ // Full 4th row: BASE “„ ”≤ £≥ ∅ ¢ ±ƒ ❦ ♥ 🙂🙁 👍👎 ⁽₍ ⁾₎ Bkspc - // Thinned out 4th row: BASE “ ” £ ± ♥ Bkspc + // Thinned out 4th row: BASE “„ ”≤ £≥ ∅ ± ❦ ♥ 🙂🙁 👍👎 Bkspc // #define FULL_BON_4THROW // _Activate_ to have symbols on all unshifted + shifted positions on _BON, 4th row. - // Affected 4th row: 🛠 ¤ ∑ ‱ ٭ 😊 ⍨ ⃰ ⁻ ⁺ 🄯 © + // Affected 4th row: 🛠 ¤ ∑ ‱ ٭ 😊 ⍨ ⃰ ⁻ ⁺ 🄯 © ⃰ √ ⁻⁺ // Full 4th row: BASE ‛🛠 ’⬆ ¤ 🄯 ∑ © ‰‱ ★٭ 😊⍨ × ⃰ √ ⁻⁺ Bkspc // Thinned out 4th row: BASE ‛ ’⬆ ‰ ★ × Bkspc // @@ -559,7 +569,11 @@ along with this program. If not, see . # endif // * Qwerty Base Arrow * # if defined(BASE_QWERTY_BASEARROW__DEF_BASE) || defined(BASE_QWERTY_BASEARROW__ALT_BASE) -# include "./base_qwerty_basearrow.h" // Your Keymap header/configuration file. +# include "./base_qwerty_basearrow.h" // qwerty base arrow, header +# endif +// * Hebrew * +# if defined(BASE_HEBREW__DEF_BASE) || defined(BASE_HEBREW__ALT_BASE) +# include "./base_hebrew.h" // Hebrew header # endif // // ⬇ insert your ./base_YOUR_KEYMAP.h #include here: From 5fb6d57f36bdafa41b6346942ad6ff975aa897ba Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Thomas=20Wei=C3=9Fschuh?= Date: Thu, 16 Sep 2021 09:04:26 +0200 Subject: [PATCH 008/595] [Bug] fix logical minimum in Programmable Button rdesc (#14464) --- tmk_core/protocol/usb_descriptor.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tmk_core/protocol/usb_descriptor.c b/tmk_core/protocol/usb_descriptor.c index ebe27a1450..a43755f899 100644 --- a/tmk_core/protocol/usb_descriptor.c +++ b/tmk_core/protocol/usb_descriptor.c @@ -247,7 +247,7 @@ const USB_Descriptor_HIDReport_Datatype_t PROGMEM SharedReport[] = { HID_RI_USAGE_PAGE(8, 0x09), // Button HID_RI_USAGE_MINIMUM(8, 0x01), // Button 1 HID_RI_USAGE_MAXIMUM(8, 0x20), // Button 32 - HID_RI_LOGICAL_MINIMUM(8, 0x01), + HID_RI_LOGICAL_MINIMUM(8, 0x00), HID_RI_LOGICAL_MAXIMUM(8, 0x01), HID_RI_REPORT_COUNT(8, 32), HID_RI_REPORT_SIZE(8, 1), From 13b93c212da202d210ba28657f1b1c3e06d56655 Mon Sep 17 00:00:00 2001 From: Takeshi ISHII <2170248+mtei@users.noreply.github.com> Date: Thu, 16 Sep 2021 18:46:51 +0900 Subject: [PATCH 009/595] [Keyboard] Increase the way to add oled code for helix/rev3. (#14426) * move rev3_Xrows/oled_display.c to rev3_Xrows/keymaps/default/oled_display.c * add dummy rev3_Xrows/oled_display.c * Add default minimum oled_task_user() to helix/rev3_Xrows/rev3_Xrows.c * remove unnecessary comment in rev3_Xrows/keymaps/default/oled_display.c * copy rev3_Xrows/keymaps/default/oled_display.c to rev3_Xrows/keymaps/via/oled_display.c --- .../rev3_4rows/keymaps/default/oled_display.c | 112 ++++++++++++++++ .../rev3_4rows/keymaps/via/oled_display.c | 112 ++++++++++++++++ keyboards/helix/rev3_4rows/oled_display.c | 124 +---------------- keyboards/helix/rev3_4rows/rev3_4rows.c | 64 +++++++++ .../rev3_5rows/keymaps/default/oled_display.c | 112 ++++++++++++++++ .../rev3_5rows/keymaps/via/oled_display.c | 112 ++++++++++++++++ keyboards/helix/rev3_5rows/oled_display.c | 126 +----------------- keyboards/helix/rev3_5rows/rev3_5rows.c | 64 +++++++++ 8 files changed, 587 insertions(+), 239 deletions(-) create mode 100644 keyboards/helix/rev3_4rows/keymaps/default/oled_display.c create mode 100644 keyboards/helix/rev3_4rows/keymaps/via/oled_display.c create mode 100644 keyboards/helix/rev3_5rows/keymaps/default/oled_display.c create mode 100644 keyboards/helix/rev3_5rows/keymaps/via/oled_display.c diff --git a/keyboards/helix/rev3_4rows/keymaps/default/oled_display.c b/keyboards/helix/rev3_4rows/keymaps/default/oled_display.c new file mode 100644 index 0000000000..fb1a6f9f87 --- /dev/null +++ b/keyboards/helix/rev3_4rows/keymaps/default/oled_display.c @@ -0,0 +1,112 @@ +/* Copyright 2020 yushakobo + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _QWERTY = 0, + _LOWER, + _RAISE, + _ADJUST +}; + +#ifdef OLED_ENABLE + +void render_status(void) { + + // Render to mode icon + static const char os_logo[][2][3] PROGMEM ={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}}; + if (is_mac_mode()) { + oled_write_P(os_logo[0][0], false); + oled_write_P(PSTR("\n"), false); + oled_write_P(os_logo[0][1], false); + }else{ + oled_write_P(os_logo[1][0], false); + oled_write_P(PSTR("\n"), false); + oled_write_P(os_logo[1][1], false); + } + + oled_write_P(PSTR(" "), false); + + // Host Keyboard Layer Status + oled_write_P(PSTR("Layer: "), false); + + switch (get_highest_layer(layer_state)) { + case _QWERTY: + oled_write_P(PSTR("Default\n"), false); + break; + case _RAISE: + oled_write_P(PSTR("Raise\n"), false); + break; + case _LOWER: + oled_write_P(PSTR("Lower\n"), false); + break; + case _ADJUST: + oled_write_P(PSTR("Adjust\n"), false); + break; + default: + // Or use the write_ln shortcut over adding '\n' to the end of your string + oled_write_ln_P(PSTR("Undefined"), false); + } + + oled_write_P(PSTR("\n"), false); + + // Host Keyboard LED Status + led_t led_state = host_keyboard_led_state(); + oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false); + oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false); + oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false); +} + + +static void render_logo(void) { + static const char PROGMEM qmk_logo[] = { + 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F, 0x90, 0x91, 0x92, 0x93, 0x94, + 0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8, 0xA9, 0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0xAF, 0xB0, 0xB1, 0xB2, 0xB3, 0xB4, + 0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, 0xC9, 0xCA, 0xCB, 0xCC, 0xCD, 0xCE, 0xCF, 0xD0, 0xD1, 0xD2, 0xD3, 0xD4, 0x00 + }; + + oled_write_P(qmk_logo, false); +} + +static void render_rgbled_status(bool full) { +#ifdef RGBLIGHT_ENABLE + char buf[30]; + if (RGBLIGHT_MODES > 1 && rgblight_is_enabled()) { + if (full) { + snprintf(buf, sizeof(buf), " LED %2d: %d,%d,%d ", + rgblight_get_mode(), + rgblight_get_hue()/RGBLIGHT_HUE_STEP, + rgblight_get_sat()/RGBLIGHT_SAT_STEP, + rgblight_get_val()/RGBLIGHT_VAL_STEP); + } else { + snprintf(buf, sizeof(buf), "[%2d] ", rgblight_get_mode()); + } + oled_write(buf, false); + } +#endif +} + +void oled_task_user(void) { + if(is_keyboard_master()){ + render_status(); + }else{ + render_logo(); + render_rgbled_status(true); + } +} +#endif diff --git a/keyboards/helix/rev3_4rows/keymaps/via/oled_display.c b/keyboards/helix/rev3_4rows/keymaps/via/oled_display.c new file mode 100644 index 0000000000..fb1a6f9f87 --- /dev/null +++ b/keyboards/helix/rev3_4rows/keymaps/via/oled_display.c @@ -0,0 +1,112 @@ +/* Copyright 2020 yushakobo + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _QWERTY = 0, + _LOWER, + _RAISE, + _ADJUST +}; + +#ifdef OLED_ENABLE + +void render_status(void) { + + // Render to mode icon + static const char os_logo[][2][3] PROGMEM ={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}}; + if (is_mac_mode()) { + oled_write_P(os_logo[0][0], false); + oled_write_P(PSTR("\n"), false); + oled_write_P(os_logo[0][1], false); + }else{ + oled_write_P(os_logo[1][0], false); + oled_write_P(PSTR("\n"), false); + oled_write_P(os_logo[1][1], false); + } + + oled_write_P(PSTR(" "), false); + + // Host Keyboard Layer Status + oled_write_P(PSTR("Layer: "), false); + + switch (get_highest_layer(layer_state)) { + case _QWERTY: + oled_write_P(PSTR("Default\n"), false); + break; + case _RAISE: + oled_write_P(PSTR("Raise\n"), false); + break; + case _LOWER: + oled_write_P(PSTR("Lower\n"), false); + break; + case _ADJUST: + oled_write_P(PSTR("Adjust\n"), false); + break; + default: + // Or use the write_ln shortcut over adding '\n' to the end of your string + oled_write_ln_P(PSTR("Undefined"), false); + } + + oled_write_P(PSTR("\n"), false); + + // Host Keyboard LED Status + led_t led_state = host_keyboard_led_state(); + oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false); + oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false); + oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false); +} + + +static void render_logo(void) { + static const char PROGMEM qmk_logo[] = { + 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F, 0x90, 0x91, 0x92, 0x93, 0x94, + 0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8, 0xA9, 0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0xAF, 0xB0, 0xB1, 0xB2, 0xB3, 0xB4, + 0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, 0xC9, 0xCA, 0xCB, 0xCC, 0xCD, 0xCE, 0xCF, 0xD0, 0xD1, 0xD2, 0xD3, 0xD4, 0x00 + }; + + oled_write_P(qmk_logo, false); +} + +static void render_rgbled_status(bool full) { +#ifdef RGBLIGHT_ENABLE + char buf[30]; + if (RGBLIGHT_MODES > 1 && rgblight_is_enabled()) { + if (full) { + snprintf(buf, sizeof(buf), " LED %2d: %d,%d,%d ", + rgblight_get_mode(), + rgblight_get_hue()/RGBLIGHT_HUE_STEP, + rgblight_get_sat()/RGBLIGHT_SAT_STEP, + rgblight_get_val()/RGBLIGHT_VAL_STEP); + } else { + snprintf(buf, sizeof(buf), "[%2d] ", rgblight_get_mode()); + } + oled_write(buf, false); + } +#endif +} + +void oled_task_user(void) { + if(is_keyboard_master()){ + render_status(); + }else{ + render_logo(); + render_rgbled_status(true); + } +} +#endif diff --git a/keyboards/helix/rev3_4rows/oled_display.c b/keyboards/helix/rev3_4rows/oled_display.c index 23edbf7be4..36bf63cb60 100644 --- a/keyboards/helix/rev3_4rows/oled_display.c +++ b/keyboards/helix/rev3_4rows/oled_display.c @@ -1,123 +1,9 @@ -/* Copyright 2020 yushakobo - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - /* - How to Customize - - $ make helix/rev3_4rows:YOUR_KEYMAP:clean - $ cp keyboards/helix/rev3_4rows/oled_display.c keyboards/helix/rev3_4rows/keymaps/YOUR_KEYMAP - - $ edit keyboards/helix/rev3_4rows/keymaps/YOUR_KEYMAP/oled_display.c - $ make helix/rev3_4rows:YOUR_KEYMAP - $ make helix/rev3_4rows:YOUR_KEYMAP:flash - */ - -#include QMK_KEYBOARD_H - -// Defines names for use in layer keycodes and the keymap -enum layer_names { - _QWERTY = 0, - _LOWER, - _RAISE, - _ADJUST -}; - -#ifdef OLED_ENABLE - -void render_status(void) { - - // Render to mode icon - static const char os_logo[][2][3] PROGMEM ={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}}; - if (is_mac_mode()) { - oled_write_P(os_logo[0][0], false); - oled_write_P(PSTR("\n"), false); - oled_write_P(os_logo[0][1], false); - }else{ - oled_write_P(os_logo[1][0], false); - oled_write_P(PSTR("\n"), false); - oled_write_P(os_logo[1][1], false); - } - - oled_write_P(PSTR(" "), false); - - // Host Keyboard Layer Status - oled_write_P(PSTR("Layer: "), false); - - switch (get_highest_layer(layer_state)) { - case _QWERTY: - oled_write_P(PSTR("Default\n"), false); - break; - case _RAISE: - oled_write_P(PSTR("Raise\n"), false); - break; - case _LOWER: - oled_write_P(PSTR("Lower\n"), false); - break; - case _ADJUST: - oled_write_P(PSTR("Adjust\n"), false); - break; - default: - // Or use the write_ln shortcut over adding '\n' to the end of your string - oled_write_ln_P(PSTR("Undefined"), false); - } - - oled_write_P(PSTR("\n"), false); - - // Host Keyboard LED Status - led_t led_state = host_keyboard_led_state(); - oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false); - oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false); - oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false); -} - - -static void render_logo(void) { - static const char PROGMEM qmk_logo[] = { - 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F, 0x90, 0x91, 0x92, 0x93, 0x94, - 0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8, 0xA9, 0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0xAF, 0xB0, 0xB1, 0xB2, 0xB3, 0xB4, - 0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, 0xC9, 0xCA, 0xCB, 0xCC, 0xCD, 0xCE, 0xCF, 0xD0, 0xD1, 0xD2, 0xD3, 0xD4, 0x00 - }; - oled_write_P(qmk_logo, false); -} + There are several ways to create your own keymap oled code: -static void render_rgbled_status(bool full) { -#ifdef RGBLIGHT_ENABLE - char buf[30]; - if (RGBLIGHT_MODES > 1 && rgblight_is_enabled()) { - if (full) { - snprintf(buf, sizeof(buf), " LED %2d: %d,%d,%d ", - rgblight_get_mode(), - rgblight_get_hue()/RGBLIGHT_HUE_STEP, - rgblight_get_sat()/RGBLIGHT_SAT_STEP, - rgblight_get_val()/RGBLIGHT_VAL_STEP); - } else { - snprintf(buf, sizeof(buf), "[%2d] ", rgblight_get_mode()); - } - oled_write(buf, false); - } -#endif -} + * Add the oled code to your keymaps//keymap.c. + * Create a new file in your keymaps// directory, add the oled code, and add `SRC + = ` to keymaps//rules.mk. + * Copy keymaps/default/oled_display.c to your keymaps// directory and modify it. -void oled_task_user(void) { - if(is_keyboard_master()){ - render_status(); - }else{ - render_logo(); - render_rgbled_status(true); - } -} -#endif +*/ diff --git a/keyboards/helix/rev3_4rows/rev3_4rows.c b/keyboards/helix/rev3_4rows/rev3_4rows.c index 7b32941106..963cc744e7 100644 --- a/keyboards/helix/rev3_4rows/rev3_4rows.c +++ b/keyboards/helix/rev3_4rows/rev3_4rows.c @@ -47,3 +47,67 @@ bool dip_switch_update_kb(uint8_t index, bool active) { return true; } #endif + +#ifdef OLED_ENABLE +static char *sprint_decimal(char *buf, int data) { + if (data > 9) { + buf = sprint_decimal(buf, data/10); + } + *buf++ = "0123456789"[data%10]; + *buf = '\0'; + return buf; +} + +char *sprints(char *buf, char *src) { + while (*src) { + *buf++ = *src++; + } + *buf = '\0'; + return buf; +} + +char *sprintd(char *buf, char *leadstr, int data) { + buf = sprints(buf, leadstr); + buf = sprint_decimal(buf, data); + return buf; +} + +char *sprint2d(char *buf, char *leadstr, int data) { + buf = sprints(buf, leadstr); + if (data > 99) { + return sprint_decimal(buf, data); + } + if (data < 10) { + *buf++ = ' '; + } + return sprint_decimal(buf, data); +} + +__attribute__((weak)) +void oled_task_user(void) { + static const char PROGMEM helix_logo[] = { + 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F, 0x90, 0x91, 0x92, 0x93, 0x94, + 0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8, 0xA9, 0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0xAF, 0xB0, 0xB1, 0xB2, 0xB3, 0xB4, + 0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, 0xC9, 0xCA, 0xCB, 0xCC, 0xCD, 0xCE, 0xCF, 0xD0, 0xD1, 0xD2, 0xD3, 0xD4, + 0x0 + }; + static const char os_logo[][2][3] PROGMEM ={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}}; + + if (is_keyboard_master()) { + if (is_mac_mode()) { + oled_write_P(os_logo[0][0], false); + oled_write_P(PSTR("\n"), false); + oled_write_P(os_logo[0][1], false); + }else{ + oled_write_P(os_logo[1][0], false); + oled_write_P(PSTR("\n"), false); + oled_write_P(os_logo[1][1], false); + } + char buf[20]; + sprint2d(buf, " Layer: ", get_highest_layer(layer_state)); + oled_write(buf, false); + } else { + oled_write_P(helix_logo, false); + } +} +#endif diff --git a/keyboards/helix/rev3_5rows/keymaps/default/oled_display.c b/keyboards/helix/rev3_5rows/keymaps/default/oled_display.c new file mode 100644 index 0000000000..fb1a6f9f87 --- /dev/null +++ b/keyboards/helix/rev3_5rows/keymaps/default/oled_display.c @@ -0,0 +1,112 @@ +/* Copyright 2020 yushakobo + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _QWERTY = 0, + _LOWER, + _RAISE, + _ADJUST +}; + +#ifdef OLED_ENABLE + +void render_status(void) { + + // Render to mode icon + static const char os_logo[][2][3] PROGMEM ={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}}; + if (is_mac_mode()) { + oled_write_P(os_logo[0][0], false); + oled_write_P(PSTR("\n"), false); + oled_write_P(os_logo[0][1], false); + }else{ + oled_write_P(os_logo[1][0], false); + oled_write_P(PSTR("\n"), false); + oled_write_P(os_logo[1][1], false); + } + + oled_write_P(PSTR(" "), false); + + // Host Keyboard Layer Status + oled_write_P(PSTR("Layer: "), false); + + switch (get_highest_layer(layer_state)) { + case _QWERTY: + oled_write_P(PSTR("Default\n"), false); + break; + case _RAISE: + oled_write_P(PSTR("Raise\n"), false); + break; + case _LOWER: + oled_write_P(PSTR("Lower\n"), false); + break; + case _ADJUST: + oled_write_P(PSTR("Adjust\n"), false); + break; + default: + // Or use the write_ln shortcut over adding '\n' to the end of your string + oled_write_ln_P(PSTR("Undefined"), false); + } + + oled_write_P(PSTR("\n"), false); + + // Host Keyboard LED Status + led_t led_state = host_keyboard_led_state(); + oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false); + oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false); + oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false); +} + + +static void render_logo(void) { + static const char PROGMEM qmk_logo[] = { + 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F, 0x90, 0x91, 0x92, 0x93, 0x94, + 0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8, 0xA9, 0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0xAF, 0xB0, 0xB1, 0xB2, 0xB3, 0xB4, + 0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, 0xC9, 0xCA, 0xCB, 0xCC, 0xCD, 0xCE, 0xCF, 0xD0, 0xD1, 0xD2, 0xD3, 0xD4, 0x00 + }; + + oled_write_P(qmk_logo, false); +} + +static void render_rgbled_status(bool full) { +#ifdef RGBLIGHT_ENABLE + char buf[30]; + if (RGBLIGHT_MODES > 1 && rgblight_is_enabled()) { + if (full) { + snprintf(buf, sizeof(buf), " LED %2d: %d,%d,%d ", + rgblight_get_mode(), + rgblight_get_hue()/RGBLIGHT_HUE_STEP, + rgblight_get_sat()/RGBLIGHT_SAT_STEP, + rgblight_get_val()/RGBLIGHT_VAL_STEP); + } else { + snprintf(buf, sizeof(buf), "[%2d] ", rgblight_get_mode()); + } + oled_write(buf, false); + } +#endif +} + +void oled_task_user(void) { + if(is_keyboard_master()){ + render_status(); + }else{ + render_logo(); + render_rgbled_status(true); + } +} +#endif diff --git a/keyboards/helix/rev3_5rows/keymaps/via/oled_display.c b/keyboards/helix/rev3_5rows/keymaps/via/oled_display.c new file mode 100644 index 0000000000..fb1a6f9f87 --- /dev/null +++ b/keyboards/helix/rev3_5rows/keymaps/via/oled_display.c @@ -0,0 +1,112 @@ +/* Copyright 2020 yushakobo + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _QWERTY = 0, + _LOWER, + _RAISE, + _ADJUST +}; + +#ifdef OLED_ENABLE + +void render_status(void) { + + // Render to mode icon + static const char os_logo[][2][3] PROGMEM ={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}}; + if (is_mac_mode()) { + oled_write_P(os_logo[0][0], false); + oled_write_P(PSTR("\n"), false); + oled_write_P(os_logo[0][1], false); + }else{ + oled_write_P(os_logo[1][0], false); + oled_write_P(PSTR("\n"), false); + oled_write_P(os_logo[1][1], false); + } + + oled_write_P(PSTR(" "), false); + + // Host Keyboard Layer Status + oled_write_P(PSTR("Layer: "), false); + + switch (get_highest_layer(layer_state)) { + case _QWERTY: + oled_write_P(PSTR("Default\n"), false); + break; + case _RAISE: + oled_write_P(PSTR("Raise\n"), false); + break; + case _LOWER: + oled_write_P(PSTR("Lower\n"), false); + break; + case _ADJUST: + oled_write_P(PSTR("Adjust\n"), false); + break; + default: + // Or use the write_ln shortcut over adding '\n' to the end of your string + oled_write_ln_P(PSTR("Undefined"), false); + } + + oled_write_P(PSTR("\n"), false); + + // Host Keyboard LED Status + led_t led_state = host_keyboard_led_state(); + oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false); + oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false); + oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false); +} + + +static void render_logo(void) { + static const char PROGMEM qmk_logo[] = { + 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F, 0x90, 0x91, 0x92, 0x93, 0x94, + 0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8, 0xA9, 0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0xAF, 0xB0, 0xB1, 0xB2, 0xB3, 0xB4, + 0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, 0xC9, 0xCA, 0xCB, 0xCC, 0xCD, 0xCE, 0xCF, 0xD0, 0xD1, 0xD2, 0xD3, 0xD4, 0x00 + }; + + oled_write_P(qmk_logo, false); +} + +static void render_rgbled_status(bool full) { +#ifdef RGBLIGHT_ENABLE + char buf[30]; + if (RGBLIGHT_MODES > 1 && rgblight_is_enabled()) { + if (full) { + snprintf(buf, sizeof(buf), " LED %2d: %d,%d,%d ", + rgblight_get_mode(), + rgblight_get_hue()/RGBLIGHT_HUE_STEP, + rgblight_get_sat()/RGBLIGHT_SAT_STEP, + rgblight_get_val()/RGBLIGHT_VAL_STEP); + } else { + snprintf(buf, sizeof(buf), "[%2d] ", rgblight_get_mode()); + } + oled_write(buf, false); + } +#endif +} + +void oled_task_user(void) { + if(is_keyboard_master()){ + render_status(); + }else{ + render_logo(); + render_rgbled_status(true); + } +} +#endif diff --git a/keyboards/helix/rev3_5rows/oled_display.c b/keyboards/helix/rev3_5rows/oled_display.c index fbaa9bc562..36bf63cb60 100644 --- a/keyboards/helix/rev3_5rows/oled_display.c +++ b/keyboards/helix/rev3_5rows/oled_display.c @@ -1,123 +1,9 @@ -/* Copyright 2020 yushakobo - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ +/* - /* - How to Customize + There are several ways to create your own keymap oled code: - $ make helix/rev3_5rows:YOUR_KEYMAP:clean - $ cp keyboards/helix/rev3_5rows/oled_display.c keyboards/helix/rev3_5rows/keymaps/YOUR_KEYMAP + * Add the oled code to your keymaps//keymap.c. + * Create a new file in your keymaps// directory, add the oled code, and add `SRC + = ` to keymaps//rules.mk. + * Copy keymaps/default/oled_display.c to your keymaps// directory and modify it. - $ edit keyboards/helix/rev3_5rows/keymaps/YOUR_KEYMAP/oled_display.c - $ make helix/rev3_5rows:YOUR_KEYMAP - $ make helix/rev3_5rows:YOUR_KEYMAP:flash - */ - -#include QMK_KEYBOARD_H - -// Defines names for use in layer keycodes and the keymap -enum layer_names { - _QWERTY = 0, - _LOWER, - _RAISE, - _ADJUST -}; - -#ifdef OLED_ENABLE - -void render_status(void) { - - // Render to mode icon - static const char os_logo[][2][3] PROGMEM ={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}}; - if (is_mac_mode()) { - oled_write_P(os_logo[0][0], false); - oled_write_P(PSTR("\n"), false); - oled_write_P(os_logo[0][1], false); - }else{ - oled_write_P(os_logo[1][0], false); - oled_write_P(PSTR("\n"), false); - oled_write_P(os_logo[1][1], false); - } - - oled_write_P(PSTR(" "), false); - - // Host Keyboard Layer Status - oled_write_P(PSTR("Layer: "), false); - - switch (get_highest_layer(layer_state)) { - case _QWERTY: - oled_write_P(PSTR("Default\n"), false); - break; - case _RAISE: - oled_write_P(PSTR("Raise\n"), false); - break; - case _LOWER: - oled_write_P(PSTR("Lower\n"), false); - break; - case _ADJUST: - oled_write_P(PSTR("Adjust\n"), false); - break; - default: - // Or use the write_ln shortcut over adding '\n' to the end of your string - oled_write_ln_P(PSTR("Undefined"), false); - } - - oled_write_P(PSTR("\n"), false); - - // Host Keyboard LED Status - led_t led_state = host_keyboard_led_state(); - oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false); - oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false); - oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false); -} - - -static void render_logo(void) { - static const char PROGMEM qmk_logo[] = { - 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F, 0x90, 0x91, 0x92, 0x93, 0x94, - 0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8, 0xA9, 0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0xAF, 0xB0, 0xB1, 0xB2, 0xB3, 0xB4, - 0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, 0xC9, 0xCA, 0xCB, 0xCC, 0xCD, 0xCE, 0xCF, 0xD0, 0xD1, 0xD2, 0xD3, 0xD4, 0x00 - }; - - oled_write_P(qmk_logo, false); -} - -static void render_rgbled_status(bool full) { -#ifdef RGBLIGHT_ENABLE - char buf[30]; - if (RGBLIGHT_MODES > 1 && rgblight_is_enabled()) { - if (full) { - snprintf(buf, sizeof(buf), " LED %2d: %d,%d,%d ", - rgblight_get_mode(), - rgblight_get_hue()/RGBLIGHT_HUE_STEP, - rgblight_get_sat()/RGBLIGHT_SAT_STEP, - rgblight_get_val()/RGBLIGHT_VAL_STEP); - } else { - snprintf(buf, sizeof(buf), "[%2d] ", rgblight_get_mode()); - } - oled_write(buf, false); - } -#endif -} - -void oled_task_user(void) { - if(is_keyboard_master()){ - render_status(); - }else{ - render_logo(); - render_rgbled_status(true); - } -} -#endif +*/ diff --git a/keyboards/helix/rev3_5rows/rev3_5rows.c b/keyboards/helix/rev3_5rows/rev3_5rows.c index 7b32941106..963cc744e7 100644 --- a/keyboards/helix/rev3_5rows/rev3_5rows.c +++ b/keyboards/helix/rev3_5rows/rev3_5rows.c @@ -47,3 +47,67 @@ bool dip_switch_update_kb(uint8_t index, bool active) { return true; } #endif + +#ifdef OLED_ENABLE +static char *sprint_decimal(char *buf, int data) { + if (data > 9) { + buf = sprint_decimal(buf, data/10); + } + *buf++ = "0123456789"[data%10]; + *buf = '\0'; + return buf; +} + +char *sprints(char *buf, char *src) { + while (*src) { + *buf++ = *src++; + } + *buf = '\0'; + return buf; +} + +char *sprintd(char *buf, char *leadstr, int data) { + buf = sprints(buf, leadstr); + buf = sprint_decimal(buf, data); + return buf; +} + +char *sprint2d(char *buf, char *leadstr, int data) { + buf = sprints(buf, leadstr); + if (data > 99) { + return sprint_decimal(buf, data); + } + if (data < 10) { + *buf++ = ' '; + } + return sprint_decimal(buf, data); +} + +__attribute__((weak)) +void oled_task_user(void) { + static const char PROGMEM helix_logo[] = { + 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F, 0x90, 0x91, 0x92, 0x93, 0x94, + 0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8, 0xA9, 0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0xAF, 0xB0, 0xB1, 0xB2, 0xB3, 0xB4, + 0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, 0xC9, 0xCA, 0xCB, 0xCC, 0xCD, 0xCE, 0xCF, 0xD0, 0xD1, 0xD2, 0xD3, 0xD4, + 0x0 + }; + static const char os_logo[][2][3] PROGMEM ={{{0x95,0x96,0},{0xb5,0xb6,0}},{{0x97,0x98,0},{0xb7,0xb8,0}}}; + + if (is_keyboard_master()) { + if (is_mac_mode()) { + oled_write_P(os_logo[0][0], false); + oled_write_P(PSTR("\n"), false); + oled_write_P(os_logo[0][1], false); + }else{ + oled_write_P(os_logo[1][0], false); + oled_write_P(PSTR("\n"), false); + oled_write_P(os_logo[1][1], false); + } + char buf[20]; + sprint2d(buf, " Layer: ", get_highest_layer(layer_state)); + oled_write(buf, false); + } else { + oled_write_P(helix_logo, false); + } +} +#endif From 85a0c494ffde3dfa555bbe32bb083eec85b9ca72 Mon Sep 17 00:00:00 2001 From: Takeshi ISHII <2170248+mtei@users.noreply.github.com> Date: Thu, 16 Sep 2021 18:47:47 +0900 Subject: [PATCH 010/595] [Keymap] Update Helix:five_rows OLED code (#14427) * Stop using snprintf() in keymaps/five_rows/oled_display.c. The binary size becomes 1350 bytes smaller. make HELIX=verbose,core-oled helix/rev2/sc:five_rows (104 bytes over) -> (95%, 1256 bytes free) make helix/rev3_5rows:five_rows (528 bytes over) -> (97%, 830 bytes free) * add matrix scan rate display to OLED for keymaps/five_rows * add matrix_output_unselect_delay.c to helix keymaps/five_rows * add GPLv2 header * apply review comment --- .../helix/rev2/keymaps/five_rows/config.h | 6 +- .../five_rows/matrix_output_unselect_delay.c | 31 +++++++ .../rev2/keymaps/five_rows/oled_display.c | 92 ++++++++++++++++--- .../helix/rev2/keymaps/five_rows/rules.mk | 13 ++- .../rev3_5rows/keymaps/five_rows/config.h | 6 +- .../five_rows/matrix_output_unselect_delay.c | 31 +++++++ .../keymaps/five_rows/oled_display.c | 92 ++++++++++++++++--- .../rev3_5rows/keymaps/five_rows/rules.mk | 13 ++- 8 files changed, 256 insertions(+), 28 deletions(-) create mode 100644 keyboards/helix/rev2/keymaps/five_rows/matrix_output_unselect_delay.c create mode 100644 keyboards/helix/rev3_5rows/keymaps/five_rows/matrix_output_unselect_delay.c diff --git a/keyboards/helix/rev2/keymaps/five_rows/config.h b/keyboards/helix/rev2/keymaps/five_rows/config.h index b9961f5c48..e1c124f419 100644 --- a/keyboards/helix/rev2/keymaps/five_rows/config.h +++ b/keyboards/helix/rev2/keymaps/five_rows/config.h @@ -29,7 +29,11 @@ along with this program. If not, see . see tmk_core/common/action_tapping.c */ #undef OLED_UPDATE_INTERVAL -#define OLED_UPDATE_INTERVAL 50 +#ifdef DEBUG_MATRIX_SCAN_RATE +# define OLED_UPDATE_INTERVAL 500 +#else +# define OLED_UPDATE_INTERVAL 50 +#endif // place overrides here diff --git a/keyboards/helix/rev2/keymaps/five_rows/matrix_output_unselect_delay.c b/keyboards/helix/rev2/keymaps/five_rows/matrix_output_unselect_delay.c new file mode 100644 index 0000000000..a093afe0a4 --- /dev/null +++ b/keyboards/helix/rev2/keymaps/five_rows/matrix_output_unselect_delay.c @@ -0,0 +1,31 @@ +/* Copyright 2021 mtei + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +void matrix_output_unselect_delay(uint8_t line, bool key_pressed) { + /* If none of the keys are pressed, + * there is no need to wait for time for the next line. */ + if (key_pressed) { +# ifdef MATRIX_IO_DELAY +# if MATRIX_IO_DELAY > 0 + wait_us(MATRIX_IO_DELAY); +# endif +# else + wait_us(30); +# endif + } +} diff --git a/keyboards/helix/rev2/keymaps/five_rows/oled_display.c b/keyboards/helix/rev2/keymaps/five_rows/oled_display.c index 090e8aaec3..fcbd81c9b6 100644 --- a/keyboards/helix/rev2/keymaps/five_rows/oled_display.c +++ b/keyboards/helix/rev2/keymaps/five_rows/oled_display.c @@ -64,6 +64,55 @@ void matrix_update(struct CharacterMatrix *dest, } # endif +static char *sprint_decimal(char *buf, int data) { + if (data > 9) { + buf = sprint_decimal(buf, data/10); + } + *buf++ = "0123456789"[data%10]; + *buf = '\0'; + return buf; +} + +static char *sprint_hex(char *buf, uint32_t data) { + if (data > 0xf) { + buf = sprint_hex(buf, data/0x10); + } + *buf++ = "0123456789abcdef"[data & 0xf]; + *buf = '\0'; + return buf; +} + +char *sprints(char *buf, char *src) { + while (*src) { + *buf++ = *src++; + } + *buf = '\0'; + return buf; +} + +char *sprintx(char *buf, char *leadstr, uint32_t data) { + buf = sprints(buf, leadstr); + buf = sprint_hex(buf, data); + return buf; +} + +char *sprintd(char *buf, char *leadstr, int data) { + buf = sprints(buf, leadstr); + buf = sprint_decimal(buf, data); + return buf; +} + +char *sprint2d(char *buf, char *leadstr, int data) { + buf = sprints(buf, leadstr); + if (data > 99) { + return sprint_decimal(buf, data); + } + if (data < 10) { + *buf++ = ' '; + } + return sprint_decimal(buf, data); +} + # ifdef SSD1306OLED static void render_logo(struct CharacterMatrix *matrix) { # else @@ -76,20 +125,35 @@ static void render_logo(void) { 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4, 0}; oled_write_P(helix_logo, false); -# ifdef RGBLIGHT_ENABLE char buf[30]; + char *bufp; +# ifdef RGBLIGHT_ENABLE if (RGBLIGHT_MODES > 1 && rgblight_is_enabled()) { - snprintf(buf, sizeof(buf), " LED %2d: %d,%d,%d ", - rgblight_get_mode(), - rgblight_get_hue()/RGBLIGHT_HUE_STEP, - rgblight_get_sat()/RGBLIGHT_SAT_STEP, - rgblight_get_val()/RGBLIGHT_VAL_STEP); + bufp = sprint2d(buf, " LED ", rgblight_get_mode()); +# ifdef DEBUG_MATRIX_SCAN_RATE + bufp = sprintd(bufp, " scan:", get_matrix_scan_rate()); +# else + bufp = sprintd(bufp, ": ", rgblight_get_hue()/RGBLIGHT_HUE_STEP); + bufp = sprintd(bufp, ",", rgblight_get_sat()/RGBLIGHT_SAT_STEP); + bufp = sprintd(bufp, ",", rgblight_get_val()/RGBLIGHT_VAL_STEP); + bufp = sprints(bufp, " "); +# endif oled_write(buf, false); # ifndef SSD1306OLED } else { +# ifdef DEBUG_MATRIX_SCAN_RATE + bufp = sprintd(buf, " scan:", get_matrix_scan_rate()); + oled_write(buf, false); +# endif oled_write_P( PSTR("\n"), false); # endif } +# else +# ifdef DEBUG_MATRIX_SCAN_RATE + bufp = sprintd(buf, " scan:", get_matrix_scan_rate()); + bufp = sprints(bufp, " "); + oled_write(buf, false); +# endif # endif } @@ -142,6 +206,11 @@ void render_status(void) { int name_num; uint32_t lstate; oled_write_P(layer_names[current_default_layer], false); +# ifdef DEBUG_MATRIX_SCAN_RATE + char buf[16]; + sprintd(buf, " scan:", get_matrix_scan_rate()); + oled_write(buf, false); +# endif oled_write_P(PSTR("\n"), false); for (lstate = layer_state, name_num = 0; lstate && name_num < sizeof(layer_names)/sizeof(char *); @@ -152,14 +221,13 @@ void render_status(void) { } } } + oled_write_P(PSTR("\n"), false); // Host Keyboard LED Status - char led[40]; - snprintf(led, sizeof(led), "\n%s %s %s", - (host_keyboard_leds() & (1<. see tmk_core/common/action_tapping.c */ #undef OLED_UPDATE_INTERVAL -#define OLED_UPDATE_INTERVAL 50 +#ifdef DEBUG_MATRIX_SCAN_RATE +# define OLED_UPDATE_INTERVAL 500 +#else +# define OLED_UPDATE_INTERVAL 50 +#endif // place overrides here diff --git a/keyboards/helix/rev3_5rows/keymaps/five_rows/matrix_output_unselect_delay.c b/keyboards/helix/rev3_5rows/keymaps/five_rows/matrix_output_unselect_delay.c new file mode 100644 index 0000000000..a093afe0a4 --- /dev/null +++ b/keyboards/helix/rev3_5rows/keymaps/five_rows/matrix_output_unselect_delay.c @@ -0,0 +1,31 @@ +/* Copyright 2021 mtei + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +void matrix_output_unselect_delay(uint8_t line, bool key_pressed) { + /* If none of the keys are pressed, + * there is no need to wait for time for the next line. */ + if (key_pressed) { +# ifdef MATRIX_IO_DELAY +# if MATRIX_IO_DELAY > 0 + wait_us(MATRIX_IO_DELAY); +# endif +# else + wait_us(30); +# endif + } +} diff --git a/keyboards/helix/rev3_5rows/keymaps/five_rows/oled_display.c b/keyboards/helix/rev3_5rows/keymaps/five_rows/oled_display.c index 090e8aaec3..fcbd81c9b6 100644 --- a/keyboards/helix/rev3_5rows/keymaps/five_rows/oled_display.c +++ b/keyboards/helix/rev3_5rows/keymaps/five_rows/oled_display.c @@ -64,6 +64,55 @@ void matrix_update(struct CharacterMatrix *dest, } # endif +static char *sprint_decimal(char *buf, int data) { + if (data > 9) { + buf = sprint_decimal(buf, data/10); + } + *buf++ = "0123456789"[data%10]; + *buf = '\0'; + return buf; +} + +static char *sprint_hex(char *buf, uint32_t data) { + if (data > 0xf) { + buf = sprint_hex(buf, data/0x10); + } + *buf++ = "0123456789abcdef"[data & 0xf]; + *buf = '\0'; + return buf; +} + +char *sprints(char *buf, char *src) { + while (*src) { + *buf++ = *src++; + } + *buf = '\0'; + return buf; +} + +char *sprintx(char *buf, char *leadstr, uint32_t data) { + buf = sprints(buf, leadstr); + buf = sprint_hex(buf, data); + return buf; +} + +char *sprintd(char *buf, char *leadstr, int data) { + buf = sprints(buf, leadstr); + buf = sprint_decimal(buf, data); + return buf; +} + +char *sprint2d(char *buf, char *leadstr, int data) { + buf = sprints(buf, leadstr); + if (data > 99) { + return sprint_decimal(buf, data); + } + if (data < 10) { + *buf++ = ' '; + } + return sprint_decimal(buf, data); +} + # ifdef SSD1306OLED static void render_logo(struct CharacterMatrix *matrix) { # else @@ -76,20 +125,35 @@ static void render_logo(void) { 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4, 0}; oled_write_P(helix_logo, false); -# ifdef RGBLIGHT_ENABLE char buf[30]; + char *bufp; +# ifdef RGBLIGHT_ENABLE if (RGBLIGHT_MODES > 1 && rgblight_is_enabled()) { - snprintf(buf, sizeof(buf), " LED %2d: %d,%d,%d ", - rgblight_get_mode(), - rgblight_get_hue()/RGBLIGHT_HUE_STEP, - rgblight_get_sat()/RGBLIGHT_SAT_STEP, - rgblight_get_val()/RGBLIGHT_VAL_STEP); + bufp = sprint2d(buf, " LED ", rgblight_get_mode()); +# ifdef DEBUG_MATRIX_SCAN_RATE + bufp = sprintd(bufp, " scan:", get_matrix_scan_rate()); +# else + bufp = sprintd(bufp, ": ", rgblight_get_hue()/RGBLIGHT_HUE_STEP); + bufp = sprintd(bufp, ",", rgblight_get_sat()/RGBLIGHT_SAT_STEP); + bufp = sprintd(bufp, ",", rgblight_get_val()/RGBLIGHT_VAL_STEP); + bufp = sprints(bufp, " "); +# endif oled_write(buf, false); # ifndef SSD1306OLED } else { +# ifdef DEBUG_MATRIX_SCAN_RATE + bufp = sprintd(buf, " scan:", get_matrix_scan_rate()); + oled_write(buf, false); +# endif oled_write_P( PSTR("\n"), false); # endif } +# else +# ifdef DEBUG_MATRIX_SCAN_RATE + bufp = sprintd(buf, " scan:", get_matrix_scan_rate()); + bufp = sprints(bufp, " "); + oled_write(buf, false); +# endif # endif } @@ -142,6 +206,11 @@ void render_status(void) { int name_num; uint32_t lstate; oled_write_P(layer_names[current_default_layer], false); +# ifdef DEBUG_MATRIX_SCAN_RATE + char buf[16]; + sprintd(buf, " scan:", get_matrix_scan_rate()); + oled_write(buf, false); +# endif oled_write_P(PSTR("\n"), false); for (lstate = layer_state, name_num = 0; lstate && name_num < sizeof(layer_names)/sizeof(char *); @@ -152,14 +221,13 @@ void render_status(void) { } } } + oled_write_P(PSTR("\n"), false); // Host Keyboard LED Status - char led[40]; - snprintf(led, sizeof(led), "\n%s %s %s", - (host_keyboard_leds() & (1< Date: Thu, 16 Sep 2021 13:40:25 -0700 Subject: [PATCH 011/595] Add i2c defaults for Convert to Proton C (#14470) * Add i2c defaults for Convert to Proton C * Hide default defines behing CTPC check --- platforms/chibios/boards/QMK_PROTON_C/configs/config.h | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/platforms/chibios/boards/QMK_PROTON_C/configs/config.h b/platforms/chibios/boards/QMK_PROTON_C/configs/config.h index a73f0c0b47..fa1a73c354 100644 --- a/platforms/chibios/boards/QMK_PROTON_C/configs/config.h +++ b/platforms/chibios/boards/QMK_PROTON_C/configs/config.h @@ -18,3 +18,12 @@ #ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP # define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE #endif + +#ifdef CONVERT_TO_PROTON_C +# ifndef I2C1_SDA_PIN +# define I2C1_SDA_PIN D1 +# endif +# ifndef I2C1_SCL_PIN +# define I2C1_SCL_PIN D0 +# endif +#endif From c6b87be8c7d04f6a88ab7f3e354475d20dbf50d9 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=C3=81lvaro=20A=2E=20Volpato?= Date: Thu, 16 Sep 2021 17:42:26 -0300 Subject: [PATCH 012/595] Mode 65S: Tap code and extra keys for media keys (#14471) --- keyboards/mode/m65s/config.h | 2 ++ keyboards/mode/m65s/rules.mk | 4 ++-- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/keyboards/mode/m65s/config.h b/keyboards/mode/m65s/config.h index ba6edb8a0b..e2e553bca9 100644 --- a/keyboards/mode/m65s/config.h +++ b/keyboards/mode/m65s/config.h @@ -71,3 +71,5 @@ along with this program. If not, see . //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION + +#define TAP_CODE_DELAY 50 diff --git a/keyboards/mode/m65s/rules.mk b/keyboards/mode/m65s/rules.mk index a9ba596d51..c74e1db161 100644 --- a/keyboards/mode/m65s/rules.mk +++ b/keyboards/mode/m65s/rules.mk @@ -6,8 +6,8 @@ MCU = STM32F401 # BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration MOUSEKEY_ENABLE = no # Mouse keys -EXTRAKEY_ENABLE = no # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend From 87665f404b48d5b60744c0774e69770a63686d3b Mon Sep 17 00:00:00 2001 From: r-pufky Date: Thu, 16 Sep 2021 20:15:01 -0700 Subject: [PATCH 013/595] [Keymap] Add gaming toggle layer & layer colors to r-pufky keymap. (#14251) --- .../massdrop/ctrl/keymaps/r-pufky/config.h | 2 + .../massdrop/ctrl/keymaps/r-pufky/keymap.c | 105 +++++++++++------- .../massdrop/ctrl/keymaps/r-pufky/readme.md | 34 ++++-- 3 files changed, 94 insertions(+), 47 deletions(-) diff --git a/keyboards/massdrop/ctrl/keymaps/r-pufky/config.h b/keyboards/massdrop/ctrl/keymaps/r-pufky/config.h index ddcd816303..e536ebdd85 100644 --- a/keyboards/massdrop/ctrl/keymaps/r-pufky/config.h +++ b/keyboards/massdrop/ctrl/keymaps/r-pufky/config.h @@ -24,3 +24,5 @@ along with this program. If not, see . #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR #define RGB_MATRIX_STARTUP_VAL 100 #define HSV_BACKLIGHT_COLOR HSV_BLUE +#define HSV_GAME_COLOR 170, 255, 192 // darker blue +#define HSV_CONTROL_COLOR 0, 255, 192 // darker red diff --git a/keyboards/massdrop/ctrl/keymaps/r-pufky/keymap.c b/keyboards/massdrop/ctrl/keymaps/r-pufky/keymap.c index d523dba891..824725756b 100644 --- a/keyboards/massdrop/ctrl/keymaps/r-pufky/keymap.c +++ b/keyboards/massdrop/ctrl/keymaps/r-pufky/keymap.c @@ -16,6 +16,9 @@ #include QMK_KEYBOARD_H +#define BASE 0 +#define GAME 1 +#define CTRL 2 #define MODS_SHIFT (get_mods() & MOD_MASK_SHIFT) #define MODS_CTRL (get_mods() & MOD_MASK_CTRL) #define MODS_ALT (get_mods() & MOD_MASK_ALT) @@ -43,34 +46,60 @@ enum ctrl_keycodes { }; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, - KC_NLCK, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_F24, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + [BASE] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_NLCK, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(CTRL), KC_F24, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ), - [1] = LAYOUT( - KC_EJCT, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24, KC_MUTE, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, KC_MSTP, KC_VOLU, - _______, RGB_SPD, RGB_VAI, RGB_SPI, RGB_HUI, RGB_SAI, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MNXT, KC_VOLD, - KC_CAPS, RGB_RMOD,RGB_VAD, RGB_MOD, RGB_HUD, RGB_SAD, _______, _______, _______, _______, _______, _______, _______, - _______, RGB_TOG, _______, _______, _______, MD_BOOT, NK_TOGG, _______, _______, _______, _______, _______, KC_BRIU, - _______, _______, _______, _______, _______, _______, _______, _______, KC_MRWD, KC_BRID, KC_MFFD + [GAME] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_HOME, KC_END, KC_LALT, KC_SPC, KC_RALT, MO(CTRL), KC_F24, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [CTRL] = LAYOUT( + KC_EJCT, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_F21, KC_F22, KC_F23, KC_F24, KC_MUTE, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, KC_MSTP, KC_VOLU, + _______, RGB_SPD, RGB_VAI, RGB_SPI, RGB_HUI, RGB_SAI, _______, _______, _______, _______, _______, TO(BASE), TO(GAME), _______, KC_MPRV, KC_MNXT, KC_VOLD, + KC_CAPS, RGB_RMOD, RGB_VAD, RGB_MOD, RGB_HUD, RGB_SAD, _______, _______, _______, _______, _______, _______, _______, + _______, RGB_TOG, _______, _______, _______, MD_BOOT, NK_TOGG, _______, _______, _______, _______, _______, KC_BRIU, + _______, _______, _______, _______, _______, _______, _______, _______, KC_MRWD, KC_BRID, KC_MFFD ), }; // Init keyboard static color with underglow off. void matrix_init_user(void) { - rgblight_sethsv(HSV_BACKLIGHT_COLOR); - rgb_matrix_set_flags(LED_FLAG_KEYLIGHT | LED_FLAG_MODIFIER | LED_FLAG_INDICATOR); + rgblight_sethsv(HSV_BACKLIGHT_COLOR); + rgb_matrix_set_flags(LED_FLAG_KEYLIGHT | LED_FLAG_MODIFIER | LED_FLAG_INDICATOR); }; // Runs constantly in the background, in a loop. void matrix_scan_user(void) { }; +// Set backlight color based on active layer +layer_state_t layer_state_set_user(layer_state_t state) { + switch (get_highest_layer(state)) { + case GAME: { + rgblight_sethsv_noeeprom(HSV_GAME_COLOR); + break; + } + case CTRL: { + rgblight_sethsv_noeeprom(HSV_CONTROL_COLOR); + break; + } + default: + rgblight_sethsv_noeeprom(HSV_BACKLIGHT_COLOR); + break; + } + return state; +} + bool process_record_user(uint16_t keycode, keyrecord_t *record) { static uint32_t key_timer; @@ -116,28 +145,28 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { return false; case RGB_TOG: if (record->event.pressed) { - switch (rgb_matrix_get_flags()) { - case LED_FLAG_ALL: { - rgb_matrix_set_flags(LED_FLAG_KEYLIGHT | LED_FLAG_MODIFIER | LED_FLAG_INDICATOR); - rgb_matrix_set_color_all(RGB_OFF); - } - break; - case (LED_FLAG_KEYLIGHT | LED_FLAG_MODIFIER | LED_FLAG_INDICATOR): { - rgb_matrix_set_flags(LED_FLAG_UNDERGLOW); - rgb_matrix_set_color_all(RGB_OFF); - } - break; - case LED_FLAG_UNDERGLOW: { - rgb_matrix_set_flags(LED_FLAG_NONE); - rgb_matrix_disable_noeeprom(); - } - break; - default: { - rgb_matrix_set_flags(LED_FLAG_ALL); - rgb_matrix_enable_noeeprom(); - } - break; - } + switch (rgb_matrix_get_flags()) { + case LED_FLAG_ALL: { + rgb_matrix_set_flags(LED_FLAG_KEYLIGHT | LED_FLAG_MODIFIER | LED_FLAG_INDICATOR); + rgb_matrix_set_color_all(RGB_OFF); + } + break; + case (LED_FLAG_KEYLIGHT | LED_FLAG_MODIFIER | LED_FLAG_INDICATOR): { + rgb_matrix_set_flags(LED_FLAG_UNDERGLOW); + rgb_matrix_set_color_all(RGB_OFF); + } + break; + case LED_FLAG_UNDERGLOW: { + rgb_matrix_set_flags(LED_FLAG_NONE); + rgb_matrix_disable_noeeprom(); + } + break; + default: { + rgb_matrix_set_flags(LED_FLAG_ALL); + rgb_matrix_enable_noeeprom(); + } + break; + } } return false; default: diff --git a/keyboards/massdrop/ctrl/keymaps/r-pufky/readme.md b/keyboards/massdrop/ctrl/keymaps/r-pufky/readme.md index 5151892599..38075b3a0f 100644 --- a/keyboards/massdrop/ctrl/keymaps/r-pufky/readme.md +++ b/keyboards/massdrop/ctrl/keymaps/r-pufky/readme.md @@ -1,6 +1,7 @@ # Massdrop Ctrl r-pufky -Gaming QOL improvments; enabling useful keys for left hand & in-game overlay usage. +Gaming QOL improvments; enabling useful keys for left hand & in-game overlay +usage. ## Layers @@ -8,21 +9,36 @@ Gaming QOL improvments; enabling useful keys for left hand & in-game overlay usa ![Typing Layer](https://i.imgur.com/qEBaupV.png) -Layer optimized to enable useful keys for gaming without changing typing state, as well as specific -in-game overlay keys. +Layer optimized to enable useful keys for typing and casual gaming without +changing typing state, as well as specific in-game overlay keys. * Left Ctrl: Easier control key usage without always setting capslock. -* Num Lock: Unique non visible character key for additional left-hand input options in game. -* Fn: Enable layer 1, temporal. -* F24: Unique non-visible F24 key; no windows function. Map to in-game overlays. +* Num Lock: Unique non visible character key for additional left-hand input + options in game. +* Fn: Enable Control layer, temporal. +* F24: Non-visible F24 key; no windows function. Map to in-game overlays. + +### Gaming Layer + +![Gaming Layer](https://i.imgur.com/q4wGbFQ.png) + +Replaces super key with additional non-printing inputs. + +* Home: Non visible character key for additional input options in game. +* End: Non visible character key for additional input options in game. +* Left Ctrl: Easier control key usage without always setting capslock. +* Fn: Enable Control layer, temporal. +* F24: Non-visible F24 key; no windows function. Map to in-game overlays. -### Function Layer +### Control Layer -![Function Layer](https://i.imgur.com/2qGNwVQ.png) +![Function Layer](https://i.imgur.com/7Nalcyp.png) * Purple: Media keys. Note CD Eject on Escape, and OSX Prev/Next on Arrows. -* Blue: Keyboard adminstration. Toggle NKRO (N Key Rollover) and enable bootloader. +* Blue: Keyboard adminstration. Toggle NKRO (N Key Rollover) and enable + bootloader. * Orange: RGB Controls. +* Green: Toggle gaming layer. * Capslock: Now requires the use of the function key. * F13-F24: Extended function keys. * Bright+/-: Monitor Brightness. From b1605f2ad98c762f1d04fb75f736e2687905aca1 Mon Sep 17 00:00:00 2001 From: Andy Yong Date: Thu, 16 Sep 2021 23:19:58 -0400 Subject: [PATCH 014/595] [Keyboard] Add Sauce Mild Keyboard (#14287) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- keyboards/sauce/mild/config.h | 58 +++++++++++++++++++ keyboards/sauce/mild/info.json | 17 ++++++ keyboards/sauce/mild/keymaps/default/keymap.c | 36 ++++++++++++ keyboards/sauce/mild/keymaps/via/keymap.c | 52 +++++++++++++++++ keyboards/sauce/mild/keymaps/via/rules.mk | 1 + keyboards/sauce/mild/mild.c | 17 ++++++ keyboards/sauce/mild/mild.h | 37 ++++++++++++ keyboards/sauce/mild/readme.md | 17 ++++++ keyboards/sauce/mild/rules.mk | 24 ++++++++ 9 files changed, 259 insertions(+) create mode 100644 keyboards/sauce/mild/config.h create mode 100644 keyboards/sauce/mild/info.json create mode 100644 keyboards/sauce/mild/keymaps/default/keymap.c create mode 100644 keyboards/sauce/mild/keymaps/via/keymap.c create mode 100644 keyboards/sauce/mild/keymaps/via/rules.mk create mode 100644 keyboards/sauce/mild/mild.c create mode 100644 keyboards/sauce/mild/mild.h create mode 100644 keyboards/sauce/mild/readme.md create mode 100644 keyboards/sauce/mild/rules.mk diff --git a/keyboards/sauce/mild/config.h b/keyboards/sauce/mild/config.h new file mode 100644 index 0000000000..6e203a4341 --- /dev/null +++ b/keyboards/sauce/mild/config.h @@ -0,0 +1,58 @@ +/* Copyright 2021 Andy Yong (Sauce) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x8367 // "SC" +#define PRODUCT_ID 0x7783 // "MS" +#define DEVICE_VER 0x0001 +#define MANUFACTURER Sauce +#define PRODUCT Mild + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 17 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { C13, C14, C15, A15, F0, F1 } +#define MATRIX_COL_PINS { A10, A9, A8, B11, B10, B2, B1, B0, A7, A5, A4, A3, A2, A1, B6, B5, B4 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +#define LED_CAPS_LOCK_PIN A6 +#define LED_SCROLL_LOCK_PIN B14 diff --git a/keyboards/sauce/mild/info.json b/keyboards/sauce/mild/info.json new file mode 100644 index 0000000000..d722a03d8b --- /dev/null +++ b/keyboards/sauce/mild/info.json @@ -0,0 +1,17 @@ +{ + "keyboard_name": "Sauce - Mild", + "url": "", + "maintainer": "Sauce", + "layouts": { + "LAYOUT_all": { + "layout": [ + {"x":0, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"x":17.25, "y":0}, + {"x":0, "y":1.25}, {"x":1, "y":1.25}, {"x":2, "y":1.25}, {"x":3, "y":1.25}, {"x":4, "y":1.25}, {"x":5, "y":1.25}, {"x":6, "y":1.25}, {"x":7, "y":1.25}, {"x":8, "y":1.25}, {"x":9, "y":1.25}, {"x":10, "y":1.25}, {"x":11, "y":1.25}, {"x":12, "y":1.25}, {"x":13, "y":1.25}, {"x":14, "y":1.25}, {"x":15.25, "y":1.25}, {"x":16.25, "y":1.25}, {"x":17.25, "y":1.25}, + {"x":0, "y":2.25, "w":1.5}, {"x":1.5, "y":2.25}, {"x":2.5, "y":2.25}, {"x":3.5, "y":2.25}, {"x":4.5, "y":2.25}, {"x":5.5, "y":2.25}, {"x":6.5, "y":2.25}, {"x":7.5, "y":2.25}, {"x":8.5, "y":2.25}, {"x":9.5, "y":2.25}, {"x":10.5, "y":2.25}, {"x":11.5, "y":2.25}, {"x":12.5, "y":2.25}, {"x":13.5, "y":2.25, "w":1.5}, {"x":15.25, "y":2.25}, {"x":16.25, "y":2.25}, {"x":17.25, "y":2.25}, + {"x":0, "y":3.25, "w":1.75}, {"x":1.75, "y":3.25}, {"x":2.75, "y":3.25}, {"x":3.75, "y":3.25}, {"x":4.75, "y":3.25}, {"x":5.75, "y":3.25}, {"x":6.75, "y":3.25}, {"x":7.75, "y":3.25}, {"x":8.75, "y":3.25}, {"x":9.75, "y":3.25}, {"x":10.75, "y":3.25}, {"x":11.75, "y":3.25}, {"x":12.75, "y":3.25, "w":2.25}, + {"x":0, "y":4.25, "w":1.25}, {"x":1.25, "y":4.25}, {"x":2.25, "y":4.25}, {"x":3.25, "y":4.25}, {"x":4.25, "y":4.25}, {"x":5.25, "y":4.25}, {"x":6.25, "y":4.25}, {"x":7.25, "y":4.25}, {"x":8.25, "y":4.25}, {"x":9.25, "y":4.25}, {"x":10.25, "y":4.25}, {"x":11.25, "y":4.25}, {"x":12.25, "y":4.25, "w":1.75}, {"x":14, "y":4.25}, {"x":16.25, "y":4.25}, + {"x":0, "y":5.25, "w":1.5}, {"x":2.5, "y":5.25, "w":1.5}, {"x":4, "y":5.25, "w":7}, {"x":11, "y":5.25, "w":1.5}, {"x":13.5, "y":5.25, "w":1.5}, {"x":15.25, "y":5.25}, {"x":16.25, "y":5.25}, {"x":17.25, "y":5.25} + ] + } + } +} diff --git a/keyboards/sauce/mild/keymaps/default/keymap.c b/keyboards/sauce/mild/keymaps/default/keymap.c new file mode 100644 index 0000000000..4b6f63aa11 --- /dev/null +++ b/keyboards/sauce/mild/keymaps/default/keymap.c @@ -0,0 +1,36 @@ +/* Copyright 2021 Andy Yong (Sauce) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, + KC_LCTL, KC_LALT, KC_SPC, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + + [1] = LAYOUT_all( + RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_MUTE, KC_VOLU, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_VOLD, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + +}; diff --git a/keyboards/sauce/mild/keymaps/via/keymap.c b/keyboards/sauce/mild/keymaps/via/keymap.c new file mode 100644 index 0000000000..01f5742d0d --- /dev/null +++ b/keyboards/sauce/mild/keymaps/via/keymap.c @@ -0,0 +1,52 @@ +/* Copyright 2021 Andy Yong (Sauce) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, + KC_LCTL, KC_LALT, KC_SPC, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + + [1] = LAYOUT_all( + RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_MUTE, KC_VOLU, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_VOLD, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + +}; diff --git a/keyboards/sauce/mild/keymaps/via/rules.mk b/keyboards/sauce/mild/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/sauce/mild/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/sauce/mild/mild.c b/keyboards/sauce/mild/mild.c new file mode 100644 index 0000000000..963cbede9e --- /dev/null +++ b/keyboards/sauce/mild/mild.c @@ -0,0 +1,17 @@ +/* Copyright 2021 Andy Yong (Sauce) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "mild.h" diff --git a/keyboards/sauce/mild/mild.h b/keyboards/sauce/mild/mild.h new file mode 100644 index 0000000000..3dbd2630ef --- /dev/null +++ b/keyboards/sauce/mild/mild.h @@ -0,0 +1,37 @@ +/* Copyright 2021 Andy Yong (Sauce) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +#define ____ KC_NO + +#define LAYOUT_all( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, K015, K016, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K412, K114, K115, K116, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K314, \ + K400, K501, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K413, K415, \ + K500, K503, K505, K510, K513, K514, K515, K516 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, ____, K014, K015, K016 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216 }, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, ____, K314, ____, ____, ____ }, \ + { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, ____, K415, ____ }, \ + { K500, K501, ____, K503, ____, K505, ____, ____, ____, ____, K510, ____, ____, K513, K514, K515, K516 } \ +} diff --git a/keyboards/sauce/mild/readme.md b/keyboards/sauce/mild/readme.md new file mode 100644 index 0000000000..70202f19ef --- /dev/null +++ b/keyboards/sauce/mild/readme.md @@ -0,0 +1,17 @@ +# Sauce Mild + +Mild is a basic TKL keyboard + +* Keyboard Maintainer: [Sauce](https://github.com/andyywz) +* Hardware Supported: Mild pcb +* Hardware Availability: - + +Make example for this keyboard (after setting up your build environment): + + make sauce/mild:default + +Flashing example for this keyboard: + + make sauce/mild:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/sauce/mild/rules.mk b/keyboards/sauce/mild/rules.mk new file mode 100644 index 0000000000..e913552c9b --- /dev/null +++ b/keyboards/sauce/mild/rules.mk @@ -0,0 +1,24 @@ +# MCU name +MCU = STM32F072 + +# Bootloader selection +BOOTLOADER = stm32-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output + +# Enter lower-power sleep mode when on the ChibiOS idle thread +OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE From 3496513865b0b1ac1b4c3771c64581e626428c4d Mon Sep 17 00:00:00 2001 From: Matt Date: Fri, 17 Sep 2021 00:38:11 -0400 Subject: [PATCH 015/595] [Keymap] Adding personal keymap (#14326) Co-authored-by: Ryan Co-authored-by: Drashna Jaelre --- .../gmmk/pro/ansi/keymaps/mattgauf/ansi.c | 241 ++++++++++++++++++ .../gmmk/pro/ansi/keymaps/mattgauf/config.h | 63 +++++ .../gmmk/pro/ansi/keymaps/mattgauf/helpers.c | 25 ++ .../gmmk/pro/ansi/keymaps/mattgauf/keymap.c | 220 ++++++++++++++++ .../ansi/keymaps/mattgauf/keymap_helpers.h | 165 ++++++++++++ .../gmmk/pro/ansi/keymaps/mattgauf/readme.md | 52 ++++ .../gmmk/pro/ansi/keymaps/mattgauf/rules.mk | 6 + 7 files changed, 772 insertions(+) create mode 100644 keyboards/gmmk/pro/ansi/keymaps/mattgauf/ansi.c create mode 100644 keyboards/gmmk/pro/ansi/keymaps/mattgauf/config.h create mode 100644 keyboards/gmmk/pro/ansi/keymaps/mattgauf/helpers.c create mode 100644 keyboards/gmmk/pro/ansi/keymaps/mattgauf/keymap.c create mode 100644 keyboards/gmmk/pro/ansi/keymaps/mattgauf/keymap_helpers.h create mode 100644 keyboards/gmmk/pro/ansi/keymaps/mattgauf/readme.md create mode 100644 keyboards/gmmk/pro/ansi/keymaps/mattgauf/rules.mk diff --git a/keyboards/gmmk/pro/ansi/keymaps/mattgauf/ansi.c b/keyboards/gmmk/pro/ansi/keymaps/mattgauf/ansi.c new file mode 100644 index 0000000000..b09af297b8 --- /dev/null +++ b/keyboards/gmmk/pro/ansi/keymaps/mattgauf/ansi.c @@ -0,0 +1,241 @@ +/* Copyright 2021 Gigahawk + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +// clang-format off +#include "ansi.h" + +#ifdef RGB_MATRIX_ENABLE +led_config_t __flash g_led_config = {{ + { 4, NO_LED, NO_LED, 95, 65, 79, 5, 28 }, + { 8, 2, 9, 0, 10, 75, 1, 7 }, + { 14, 3, 15, NO_LED, 16, 86, 6, 13 }, + { 20, 18, 21, 23, 22, 94, 12, 19 }, + { 25, 30, 26, 31, 27, 32, 29, 24 }, + { 41, 36, 42, 37, 43, 38, 35, 40 }, + { 46, 89, 47, 34, 48, 72, 78, 45 }, + { 52, 39, 53, 97, 54, 82, 44, 51 }, + { 58, 63, 59, 64, NO_LED, 60, 62, 57 }, + { 11, 90, 55, 17, 33, 49, NO_LED, 69 }, + { NO_LED, 85, 93, 61, 96, 66, 50, 56 } +}, { + {0, 0}, // 0, ESC, k13 + {0, 15}, // 1, ~, k16 + {4, 26}, // 2, Tab, k11 + {5, 38}, // 3, Caps, k21 + {9, 49}, // 4, Sh_L, k00 + {2, 61}, // 5, Ct_L, k06 + {18, 0}, // 6, F1, k26 + {14, 15}, // 7, 1, k17 + {22, 26}, // 8, Q, k10 + {25, 38}, // 9, A, k12 + {33, 49}, // 10, Z, k14 + {20, 61}, // 11, Win_L, k90 + {33, 0}, // 12, F2, k36 + {29, 15}, // 13, 2, k27 + {36, 26}, // 14, W, k20 + {40, 38}, // 15, S, k22 + {47, 49}, // 16, X, k24 + {38, 61}, // 17, Alt_L, k93 + {47, 0}, // 18, F3, k31 + {43, 15}, // 19, 3, k37 + {51, 26}, // 20, E, k30 + {54, 38}, // 21, D, k32 + {61, 49}, // 22, C, k34 + {61, 0}, // 23, F4, k33 + {58, 15}, // 24, 4, k47 + {65, 26}, // 25, R, k40 + {69, 38}, // 26, F, k42 + {76, 49}, // 27, V, k44 + {79, 0}, // 28, F5, k07 + {72, 15}, // 29, 5, k46 + {79, 26}, // 30, T, k41 + {83, 38}, // 31, G, k43 + {90, 49}, // 32, B, k45 + {92, 61}, // 33, SPACE, k94 + {94, 0}, // 34, F6, k63 + {87, 15}, // 35, 6, k56 + {94, 26}, // 36, Y, k51 + {98, 38}, // 37, H, k53 + {105, 49}, // 38, N, k55 + {108, 0}, // 39, F7, k71 + {101, 15}, // 40, 7, k57 + {108, 26}, // 41, U, k50 + {112, 38}, // 42, J, k52 + {119, 49}, // 43, M, k54 + {123, 0}, // 44, F8, k76 + {116, 15}, // 45, 8, k67 + {123, 26}, // 46, I, k60 + {126, 38}, // 47, K, k62 + {134, 49}, // 48, ,, k64 + {145, 61}, // 49, Alt_R, k95 + {141, 0}, // 50, F9, ka6 + {130, 15}, // 51, 9, k77 + {137, 26}, // 52, O, k70 + {141, 38}, // 53, L, k72 + {148, 49}, // 54, ., k74 + {159, 61}, // 55, FN, k92 + {155, 0}, // 56, F10, ka7 + {145, 15}, // 57, 0, k87 + {152, 26}, // 58, P, k80 + {155, 38}, // 59, ;, k82 + {163, 49}, // 60, ?, k85 + {170, 0}, // 61, F11, ka3 + {159, 15}, // 62, -, k86 + {166, 26}, // 63, [, k81 + {170, 38}, // 64, ", k83 + {173, 61}, // 65, Ct_R, k04 + {184, 0}, // 66, F12, ka5 + {0, 8}, // 67, LED, l01 + {224, 8}, // 68, LED, l11 + {202, 0}, // 69, Prt, k97 + {0, 15}, // 70, LED, l02 + {224, 15}, // 71, LED, l12 + {224, 15}, // 72, Del, k65 + {0, 21}, // 73, LED, l03 + {224, 21}, // 74, LED, l13 + {224, 26}, // 75, PgUp, k15 + {0, 28}, // 76, LED, l04 + {224, 28}, // 77, LED, l14 + {173, 15}, // 78, =, k66 + {220, 64}, // 79, Right, k05 + {0, 35}, // 80, LED, l05 + {224, 35}, // 81, LED, l15 + {224, 49}, // 82, End, k75 + {0, 42}, // 83, LED, l06 + {224, 42}, // 84, LED, l16 + {195, 15}, // 85, BSpc, ka1 + {224, 38}, // 86, PgDn, k25 + {0, 48}, // 87, LED, l07 + {224, 48}, // 88, LED, l17 + {181, 26}, // 89, ], k61 + {182, 49}, // 90, Sh_R, k91 + {0, 55}, // 91, LED, l08 + {224, 55}, // 92, LED, l18 + {199, 26}, // 93, \, ka2 + {206, 52}, // 94, Up, k35 + {191, 64}, // 95, Left, k03 + {193, 38}, // 96, Enter, ka4 + {206, 64} // 97, Down, k73 +}, { + 4, 4, 4, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 2, 2, 4, 2, 2, 4, 2, 2, + 4, 2, 2, 4, 4, 2, 2, 4, 2, 2, 4, 4, 2, 2, 4, 4, 2, 2, 4, 4, 4, 4, 4 +}}; + +const aw_led g_aw_leds[DRIVER_LED_TOTAL] = { + {0, CS1_SW1, CS2_SW1, CS3_SW1}, // 0, ESC, k13 + {0, CS4_SW1, CS5_SW1, CS6_SW1}, // 1, ~, k16 + {0, CS7_SW1, CS8_SW1, CS9_SW1}, // 2, Tab, k11 + {0, CS10_SW1, CS11_SW1, CS12_SW1}, // 3, Caps, k21 + {0, CS13_SW1, CS14_SW1, CS15_SW1}, // 4, Sh_L, k00 + {0, CS16_SW1, CS17_SW1, CS18_SW1}, // 5, Ct_L, k06 + {0, CS1_SW2, CS2_SW2, CS3_SW2}, // 6, F1, k26 + {0, CS4_SW2, CS5_SW2, CS6_SW2}, // 7, 1, k17 + {0, CS7_SW2, CS8_SW2, CS9_SW2}, // 8, Q, k10 + {0, CS10_SW2, CS11_SW2, CS12_SW2}, // 9, A, k12 + {0, CS13_SW2, CS14_SW2, CS15_SW2}, // 10, Z, k14 + {0, CS16_SW2, CS17_SW2, CS18_SW2}, // 11, Win_L, k90 + {0, CS1_SW3, CS2_SW3, CS3_SW3}, // 12, F2, k36 + {0, CS4_SW3, CS5_SW3, CS6_SW3}, // 13, 2, k27 + {0, CS7_SW3, CS8_SW3, CS9_SW3}, // 14, W, k20 + {0, CS10_SW3, CS11_SW3, CS12_SW3}, // 15, S, k22 + {0, CS13_SW3, CS14_SW3, CS15_SW3}, // 16, X, k24 + {0, CS16_SW3, CS17_SW3, CS18_SW3}, // 17, Alt_L, k93 + {0, CS1_SW4, CS2_SW4, CS3_SW4}, // 18, F3, k31 + {0, CS4_SW4, CS5_SW4, CS6_SW4}, // 19, 3, k37 + {0, CS7_SW4, CS8_SW4, CS9_SW4}, // 20, E, k30 + {0, CS10_SW4, CS11_SW4, CS12_SW4}, // 21, D, k32 + {0, CS13_SW4, CS14_SW4, CS15_SW4}, // 22, C, k34 + {0, CS1_SW5, CS2_SW5, CS3_SW5}, // 23, F4, k33 + {0, CS4_SW5, CS5_SW5, CS6_SW5}, // 24, 4, k47 + {0, CS7_SW5, CS8_SW5, CS9_SW5}, // 25, R, k40 + {0, CS10_SW5, CS11_SW5, CS12_SW5}, // 26, F, k42 + {0, CS13_SW5, CS14_SW5, CS15_SW5}, // 27, V, k44 + {0, CS1_SW6, CS2_SW6, CS3_SW6}, // 28, F5, k07 + {0, CS4_SW6, CS5_SW6, CS6_SW6}, // 29, 5, k46 + {0, CS7_SW6, CS8_SW6, CS9_SW6}, // 30, T, k41 + {0, CS10_SW6, CS11_SW6, CS12_SW6}, // 31, G, k43 + {0, CS13_SW6, CS14_SW6, CS15_SW6}, // 32, B, k45 + {0, CS16_SW6, CS17_SW6, CS18_SW6}, // 33, SPACE, k94 + {0, CS1_SW7, CS2_SW7, CS3_SW7}, // 34, F6, k63 + {0, CS4_SW7, CS5_SW7, CS6_SW7}, // 35, 6, k56 + {0, CS7_SW7, CS8_SW7, CS9_SW7}, // 36, Y, k51 + {0, CS10_SW7, CS11_SW7, CS12_SW7}, // 37, H, k53 + {0, CS13_SW7, CS14_SW7, CS15_SW7}, // 38, N, k55 + {0, CS1_SW8, CS2_SW8, CS3_SW8}, // 39, F7, k71 + {0, CS4_SW8, CS5_SW8, CS6_SW8}, // 40, 7, k57 + {0, CS7_SW8, CS8_SW8, CS9_SW8}, // 41, U, k50 + {0, CS10_SW8, CS11_SW8, CS12_SW8}, // 42, J, k52 + {0, CS13_SW8, CS14_SW8, CS15_SW8}, // 43, M, k54 + {0, CS1_SW9, CS2_SW9, CS3_SW9}, // 44, F8, k76 + {0, CS4_SW9, CS5_SW9, CS6_SW9}, // 45, 8, k67 + {0, CS7_SW9, CS8_SW9, CS9_SW9}, // 46, I, k60 + {0, CS10_SW9, CS11_SW9, CS12_SW9}, // 47, K, k62 + {0, CS13_SW9, CS14_SW9, CS15_SW9}, // 48, ,, k64 + {0, CS16_SW9, CS17_SW9, CS18_SW9}, // 49, Alt_R, k95 + {0, CS1_SW10, CS2_SW10, CS3_SW10}, // 50, F9, ka6 + {0, CS4_SW10, CS5_SW10, CS6_SW10}, // 51, 9, k77 + {0, CS7_SW10, CS8_SW10, CS9_SW10}, // 52, O, k70 + {0, CS10_SW10, CS11_SW10, CS12_SW10}, // 53, L, k72 + {0, CS13_SW10, CS14_SW10, CS15_SW10}, // 54, ., k74 + {0, CS16_SW10, CS17_SW10, CS18_SW10}, // 55, FN, k92 + {0, CS1_SW11, CS2_SW11, CS3_SW11}, // 56, F10, ka7 + {0, CS4_SW11, CS5_SW11, CS6_SW11}, // 57, 0, k87 + {0, CS7_SW11, CS8_SW11, CS9_SW11}, // 58, P, k80 + {0, CS10_SW11, CS11_SW11, CS12_SW11}, // 59, ;, k82 + {0, CS13_SW11, CS14_SW11, CS15_SW11}, // 60, ?, k85 + {0, CS1_SW12, CS2_SW12, CS3_SW12}, // 61, F11, ka3 + {0, CS4_SW12, CS5_SW12, CS6_SW12}, // 62, -, k86 + {0, CS7_SW12, CS8_SW12, CS9_SW12}, // 63, [, k81 + {0, CS10_SW12, CS11_SW12, CS12_SW12}, // 64, ", k83 + {0, CS16_SW12, CS17_SW12, CS18_SW12}, // 65, Ct_R, k04 + + {1, CS1_SW1, CS2_SW1, CS3_SW1}, // 66, F12, ka5 + {1, CS13_SW1, CS14_SW1, CS15_SW1}, // 67, LED, l01 + {1, CS16_SW1, CS17_SW1, CS18_SW1}, // 68, LED, l11 + {1, CS4_SW2, CS5_SW2, CS6_SW2}, // 69, Prt, k97 + {1, CS13_SW2, CS14_SW2, CS15_SW2}, // 70, LED, l02 + {1, CS16_SW2, CS17_SW2, CS18_SW2}, // 71, LED, l12 + {1, CS4_SW3, CS5_SW3, CS6_SW3}, // 72, Del, k65 + {1, CS13_SW3, CS14_SW3, CS15_SW3}, // 73, LED, l03 + {1, CS16_SW3, CS17_SW3, CS18_SW3}, // 74, LED, l13 + {1, CS4_SW4, CS5_SW4, CS6_SW4}, // 75, PgUp, k15 + {1, CS13_SW4, CS14_SW4, CS15_SW4}, // 76, LED, l04 + {1, CS16_SW4, CS17_SW4, CS18_SW4}, // 77, LED, l14 + {1, CS1_SW5, CS2_SW5, CS3_SW5}, // 78, =, k66 + {1, CS10_SW5, CS11_SW5, CS12_SW5}, // 79, Right, k05 + {1, CS13_SW5, CS14_SW5, CS15_SW5}, // 80, LED, l05 + {1, CS16_SW5, CS17_SW5, CS18_SW5}, // 81, LED, l15 + {1, CS4_SW6, CS5_SW6, CS6_SW6}, // 82, End, k75 + {1, CS13_SW6, CS14_SW6, CS15_SW6}, // 83, LED, l06 + {1, CS16_SW6, CS17_SW6, CS18_SW6}, // 84, LED, l16 + {1, CS1_SW7, CS2_SW7, CS3_SW7}, // 85, BSpc, ka1 + {1, CS4_SW7, CS5_SW7, CS6_SW7}, // 86, PgDn, k25 + {1, CS13_SW7, CS14_SW7, CS15_SW7}, // 87, LED, l07 + {1, CS16_SW7, CS17_SW7, CS18_SW7}, // 88, LED, l17 + {1, CS1_SW8, CS2_SW8, CS3_SW8}, // 89, ], k61 + {1, CS4_SW8, CS5_SW8, CS6_SW8}, // 90, Sh_R, k91 + {1, CS13_SW8, CS14_SW8, CS15_SW8}, // 91, LED, l08 + {1, CS16_SW8, CS17_SW8, CS18_SW8}, // 92, LED, l18 + {1, CS1_SW9, CS2_SW9, CS3_SW9}, // 93, \, ka2 + {1, CS4_SW9, CS5_SW9, CS6_SW9}, // 94, Up, k35 + {1, CS4_SW10, CS5_SW10, CS6_SW10}, // 95, Left, k03 + {1, CS1_SW11, CS2_SW11, CS3_SW11}, // 96, Enter, ka4 + {1, CS4_SW11, CS5_SW11, CS6_SW11}, // 97, Down, k73 +}; +// clang-format on +#endif diff --git a/keyboards/gmmk/pro/ansi/keymaps/mattgauf/config.h b/keyboards/gmmk/pro/ansi/keymaps/mattgauf/config.h new file mode 100644 index 0000000000..26417b8234 --- /dev/null +++ b/keyboards/gmmk/pro/ansi/keymaps/mattgauf/config.h @@ -0,0 +1,63 @@ +/* Copyright 2021 Matt Gauf + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +// clang-format off +#pragma once + +/* Defaults */ +#define RAW_USAGE_PAGE 0x200 +#define RAW_USAGE_ID 0x40 + +/* Board Features */ +#define DYNAMIC_MACRO_SIZE 512 + +/* RGB Matrix Features */ +#define RGB_MATRIX_KEYPRESSES +#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR +#define RGB_DISABLE_WHEN_USB_SUSPENDED true + +/* RGB Matrix Framebuffer Config */ +// #define RGB_MATRIX_FRAMEBUFFER_EFFECTS +// #define RGB_MATRIX_TYPING_HEATMAP_DECREASE_DELAY_MS 25 + +/* RGB Matrix Disabled Effects */ +#define DISABLE_RGB_MATRIX_ALPHAS_MODS // Static dual hue, speed is hue for secondary hue +#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT // Single hue 3 blade spinning pinwheel fades saturation +#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL // Single hue 3 blade spinning pinwheel fades brightness +#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL // Full dual gradients scrolling out to in +#define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL // Full gradient spinning pinwheel around center of keyboard +#define DISABLE_RGB_MATRIX_DUAL_BEACON // Full gradient spinning around center of keyboard +#define DISABLE_RGB_MATRIX_RAINBOW_BEACON // Full tighter gradient spinning around center of keyboard +#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS // Full dual gradients spinning two halfs of keyboard +#define DISABLE_RGB_MATRIX_RAINDROPS // Randomly changes a single key's hue +#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS // Randomly changes a single key's hue and saturation +#define DISABLE_RGB_MATRIX_HUE_PENDULUM // Hue shifts up a slight ammount in a wave to the right, then back to the left +#define DISABLE_RGB_MATRIX_HUE_WAVE // Hue shifts up a slight ammount and then back down in a wave to the right + +#if defined(RGB_MATRIX_FRAMEBUFFER_EFFECTS) + #define DISABLE_RGB_MATRIX_DIGITAL_RAIN // That famous computer simulation +#endif + +#if defined(RGB_MATRIX_KEYPRESSES) || defined(RGB_MATRIX_KEYRELEASES) + #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE // Hue & value pulse near a single key hit then fades value out + #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS // Hue & value pulse the same column and row of a single key hit then fades value out + #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS // Hue & value pulse away on the same column and row of a single key hit then fades value out + #define DISABLE_RGB_MATRIX_SPLASH // Full gradient & value pulse away from a single key hit then fades value out + #define DISABLE_RGB_MATRIX_SOLID_SPLASH // Hue & value pulse away from a single key hit then fades value out +#endif + +#define DISABLE_RGB_MATRIX_EFFECT_MAX +// clang-format on diff --git a/keyboards/gmmk/pro/ansi/keymaps/mattgauf/helpers.c b/keyboards/gmmk/pro/ansi/keymaps/mattgauf/helpers.c new file mode 100644 index 0000000000..f3f443cedb --- /dev/null +++ b/keyboards/gmmk/pro/ansi/keymaps/mattgauf/helpers.c @@ -0,0 +1,25 @@ +/* Copyright 2021 Matt Gauf + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "rgb_matrix.h" + +void rgb_matrix_set_color_flags(uint8_t red, uint8_t green, uint8_t blue, uint8_t flags) { + for (uint8_t ii = 0; ii < DRIVER_LED_TOTAL; ii++) { + if (g_led_config.flags[ii] & flags) { + rgb_matrix_set_color(ii, red, green, blue); + } + } +} diff --git a/keyboards/gmmk/pro/ansi/keymaps/mattgauf/keymap.c b/keyboards/gmmk/pro/ansi/keymaps/mattgauf/keymap.c new file mode 100644 index 0000000000..f96be6ffe9 --- /dev/null +++ b/keyboards/gmmk/pro/ansi/keymaps/mattgauf/keymap.c @@ -0,0 +1,220 @@ +/* Copyright 2021 Matt Gauf + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +// clang-format off +#include QMK_KEYBOARD_H +#include "keymap_helpers.h" + + +enum custom_codes { + SET_MP = RGB_M_P, + SET_MB = RGB_M_B, + SET_MR = RGB_M_R, + + MG_F17 = SAFE_RANGE, + MG_F18, + MG_F19 +}; + + +enum layer_names { + _DEFAULT = 0, + _EFFECTS, + _UTILITY, + _DFUMODE +}; + + +// static uint8_t rgb_pin_fn_column[] = {PIN_DEL,PIN_PGUP,PIN_PGDN,PIN_END}; +// static uint8_t rgb_pin_left_underglow[] = {PIN_LED_L01,PIN_LED_L02,PIN_LED_L03,PIN_LED_L04,PIN_LED_L05,PIN_LED_L06,PIN_LED_L07,PIN_LED_L08}; +// static uint8_t rgb_pin_right_underglow[] = {PIN_LED_L11,PIN_LED_L12,PIN_LED_L13,PIN_LED_L14,PIN_LED_L15,PIN_LED_L16,PIN_LED_L17,PIN_LED_L18}; + + +#define MODS_SHIFT ((get_mods() | get_oneshot_mods()) & MOD_MASK_SHIFT) +#define MODS_CTRL ((get_mods() | get_oneshot_mods()) & MOD_MASK_CTRL) +#define MODS_ALT ((get_mods() | get_oneshot_mods()) & MOD_MASK_ALT) +#define MODS_GUI ((get_mods() | get_oneshot_mods()) & MOD_MASK_GUI) + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_DEFAULT] = LAYOUT(KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, MG_F17, KC_MUTE, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, MO(_EFFECTS), KC_LEFT, KC_DOWN, KC_RGHT), + + [_EFFECTS] = LAYOUT(_______, KC_F13, KC_F14, KC_F15, KC_F16, RGB_VAD, RGB_VAI, KC_MPRV, KC_MPLY, KC_MNXT, KC_MUTE, KC_VOLD, KC_VOLU, MG_F18, _______, + _______, SET_MP, SET_MB, SET_MR, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_MOD, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_RMOD, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_SPI, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, _______, RGB_SAI, RGB_SPD, + _______, _______, _______, _______, TG(_UTILITY), MO(_DFUMODE), _______, RGB_HUD, RGB_SAD, RGB_HUI), + + [_UTILITY] = LAYOUT(_______, _______, _______, _______, _______, _______, _______, _______, _______, DM_PLY1, DM_PLY2, DM_REC1, DM_REC2, DM_RSTP, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), + + [_DFUMODE] = LAYOUT(RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, MG_F19, DEBUG, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), +}; +// Runs constantly in the background, in a loop. +void rgb_matrix_indicators_user(void) { + if (rgb_matrix_get_flags() & (LED_FLAG_KEYLIGHT | LED_FLAG_MODIFIER)) { + + if (IS_LAYER_ON(_UTILITY)) { + rgb_matrix_set_color(PIN_F9, LEDGREE); + rgb_matrix_set_color(PIN_F10, LEDGREE); + rgb_matrix_set_color(PIN_F11, LED_RED); + rgb_matrix_set_color(PIN_F12, LED_RED); + rgb_matrix_set_color(PIN_PRINT, LEDTEAL); + } + + switch (get_highest_layer(layer_state)) { + case _DFUMODE: + rgb_matrix_set_color_all(LED_OFF); + rgb_matrix_set_color(PIN_ESC, LED_RED); + rgb_matrix_set_color(PIN_PRINT, LEDORAN); + return; + case _EFFECTS: + rgb_matrix_set_color(PIN_PRINT, LEDGREE); + break; + default: + break; + } + + if (host_keyboard_led_state().caps_lock) { + rgb_matrix_set_color(PIN_CAPS, RGB_WHITE); + } + + } +} + + +// Called on start +void dynamic_macro_record_start_user(void) { + dprint("-- Recording Started\n"); + layer_on(_UTILITY); +} + + +// Called on end +void dynamic_macro_record_end_user(int8_t direction) { + dprint("-- Recording Ended\n"); +} + + +// Called on playback +void dynamic_macro_play_user(int8_t direction) { + dprint("-- Recording Playing\n"); +} + + +// Runs on encoder event +bool encoder_update_user(uint8_t index, bool clockwise) { + uint8_t curr_mod = get_mods(); + + if (IS_LAYER_ON(_EFFECTS)) { + if (clockwise) { + rgb_matrix_increase_val(); + } else { + rgb_matrix_decrease_val(); + } + } else { + if (MODS_GUI) { + if (MODS_GUI && MODS_SHIFT) { + clear_mods(); + if (clockwise) { + tap_code16(LSG(KC_Z)); + } else { + tap_code16(LGUI(KC_Z)); + } + set_mods(curr_mod); + } else if (MODS_GUI && MODS_ALT) { + clear_mods(); + if (clockwise) { + tap_code(KC_RIGHT); + } else { + tap_code(KC_LEFT); + } + set_mods(curr_mod); + } else { + if (clockwise) { + tap_code16(LGUI(KC_TAB)); + } else { + tap_code16(LSG(KC_TAB)); + } + } + } else { + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } + } + return true; +} + + +// Runs on key event +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case MG_F17: + if (record->event.pressed) { + tap_code16(HYPR(KC_F17)); + } + return false; + case MG_F18: + if (record->event.pressed) { + tap_code16(HYPR(KC_F18)); + } + return false; + case MG_F19: + if (record->event.pressed) { + tap_code16(HYPR(KC_F19)); + } + return false; + case RGB_TOG: + if (record->event.pressed) { + switch (rgb_matrix_get_flags()) { + case LED_FLAG_ALL: + rgb_matrix_set_flags(LED_FLAG_NONE); + break; + case LED_FLAG_KEYLIGHT | LED_FLAG_MODIFIER: + rgb_matrix_set_flags(LED_FLAG_ALL); + break; + case LED_FLAG_UNDERGLOW: + rgb_matrix_set_flags(LED_FLAG_KEYLIGHT | LED_FLAG_MODIFIER); + break; + default: + rgb_matrix_set_flags(LED_FLAG_UNDERGLOW); + break; + } + } + return false; + default: + return true; // Process all other keycodes normally + } +} +// clang-format on diff --git a/keyboards/gmmk/pro/ansi/keymaps/mattgauf/keymap_helpers.h b/keyboards/gmmk/pro/ansi/keymaps/mattgauf/keymap_helpers.h new file mode 100644 index 0000000000..2a6e8dae7b --- /dev/null +++ b/keyboards/gmmk/pro/ansi/keymaps/mattgauf/keymap_helpers.h @@ -0,0 +1,165 @@ +/* Copyright 2021 Matt Gauf + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +// clang-format off +#include +#include "rgb_matrix_types.h" + +/* Color Codes */ +#define LEDWHIT 0xff, 0xff, 0xff +#define LED_RED 0xff, 0x00, 0x00 +#define LEDORAN 0xff, 0x29, 0x00 +#define LEDGOLD 0xff, 0x80, 0x00 +#define LEDYELL 0xff, 0xff, 0x00 +#define LEDCHAR 0x80, 0xff, 0x00 +#define LEDGREE 0x00, 0xff, 0x00 +#define LEDFOAM 0x00, 0xff, 0x40 +#define LEDTEAL 0x00, 0x80, 0xff +#define LEDBLUE 0x00, 0x00, 0xff +#define LEDPURP 0x80, 0x00, 0xff +#define LEDMAGE 0xff, 0x00, 0xff +#define LEDPINK 0xff, 0x00, 0x80 +#define LEDBLAC 0x00, 0x00, 0x00 +#define LED_OFF 0x00, 0x00, 0x00 + +/* Color Functions */ +void rgb_matrix_set_color_flags(uint8_t red, uint8_t green, uint8_t blue, uint8_t flags); + +/* Function Row */ +#define PIN_ESC 0 +#define PIN_F1 6 +#define PIN_F2 12 +#define PIN_F3 18 +#define PIN_F4 23 +#define PIN_F5 28 +#define PIN_F6 34 +#define PIN_F7 39 +#define PIN_F8 44 +#define PIN_F9 50 +#define PIN_F10 56 +#define PIN_F11 61 +#define PIN_F12 66 +#define PIN_PRINT 69 + +/* Number Row */ +#define PIN_0 57 +#define PIN_1 7 +#define PIN_2 13 +#define PIN_3 19 +#define PIN_4 24 +#define PIN_5 29 +#define PIN_6 35 +#define PIN_7 40 +#define PIN_8 45 +#define PIN_9 51 + +/* QWERTY */ +#define PIN_A 9 +#define PIN_B 32 +#define PIN_C 22 +#define PIN_D 21 +#define PIN_E 20 +#define PIN_F 26 +#define PIN_G 31 +#define PIN_H 37 +#define PIN_I 46 +#define PIN_J 42 +#define PIN_K 47 +#define PIN_L 53 +#define PIN_M 43 +#define PIN_N 38 +#define PIN_O 52 +#define PIN_P 58 +#define PIN_Q 8 +#define PIN_R 25 +#define PIN_S 15 +#define PIN_T 30 +#define PIN_U 41 +#define PIN_V 27 +#define PIN_W 14 +#define PIN_X 16 +#define PIN_Y 36 +#define PIN_Z 10 + +/* Symbols */ +#define PIN_MINUS 62 +#define PIN_EQUAL 78 +#define PIN_RBRACKET 89 +#define PIN_LBRACKET 63 +#define PIN_BSLASH 93 +#define PIN_SLASH 60 +#define PIN_SCOLON 59 +#define PIN_QUOTE 64 +#define PIN_COMMA 48 +#define PIN_DOT 54 +#define PIN_GRAVE 1 + +/* Indentation */ +#define PIN_TAB 2 +#define PIN_SPACE 33 + +/* Line Control */ +#define PIN_BSPACE 85 +#define PIN_ENTER 96 + +/* Indicator */ +#define PIN_CAPS 3 + +/* Left Modifiers */ +#define PIN_LSHIFT 4 +#define PIN_LCTRL 5 +#define PIN_LALT 17 +#define PIN_LGUI 11 + +/* Right Modifiers */ +#define PIN_RSHIFT 90 +#define PIN_RCTRL 65 +#define PIN_RALT 49 +#define PIN_FN 55 + +/* Arrow Keys */ +#define PIN_UP 94 +#define PIN_DOWN 97 +#define PIN_LEFT 95 +#define PIN_RIGHT 79 + +/* Fn Column */ +#define PIN_DEL 72 // ┳ TOP +#define PIN_PGUP 75 // ┃ +#define PIN_PGDN 86 // ┃ +#define PIN_END 82 // ┻ BOTTOM + +/* Left Side Underglow */ +#define PIN_LED_L01 67 // ┳ TOP +#define PIN_LED_L02 70 // ┃ +#define PIN_LED_L03 73 // ┃ +#define PIN_LED_L04 76 // ┃ +#define PIN_LED_L05 80 // ┃ +#define PIN_LED_L06 83 // ┃ +#define PIN_LED_L07 87 // ┃ +#define PIN_LED_L08 91 // ┻ BOTTOM + +/* Right Side Underglow */ +#define PIN_LED_L11 68 // ┳ TOP +#define PIN_LED_L12 71 // ┃ +#define PIN_LED_L13 74 // ┃ +#define PIN_LED_L14 77 // ┃ +#define PIN_LED_L15 81 // ┃ +#define PIN_LED_L16 84 // ┃ +#define PIN_LED_L17 88 // ┃ +#define PIN_LED_L18 92 // ┻ BOTTOM + +// clang-format on diff --git a/keyboards/gmmk/pro/ansi/keymaps/mattgauf/readme.md b/keyboards/gmmk/pro/ansi/keymaps/mattgauf/readme.md new file mode 100644 index 0000000000..f388a3fbf1 --- /dev/null +++ b/keyboards/gmmk/pro/ansi/keymaps/mattgauf/readme.md @@ -0,0 +1,52 @@ +# @mattgauf's GMMK Pro layout + +### `_DEFAULT` +> *Based on the default ansi layout, this keymap contains the following changes to the default layer.* + - Screensaver: `HYPER(F17)` + - `KC_PSCR` → `MG_F17` + - `KC_DEL` → `KC_HOME` + +> *Additionally the encoder will follow new rules when holding a key.* + - `KC_GUI` will cycle through applications (macOS variant) + - `KC_GUI + KC_ALT` will tap the left and right arrows. + - `KC_GUI + KC_SHIFT` will tap Undo and Redo (macOS variant) + +### `_EFFECTS` +> *The function layer is now used for additional layer access, effect keys, and media keys (following the Macbook Pro fn key layout).* + +> *Additionally while effects is active, the encoder will only adjust the brightness of the RGB matrix.* + - The RGB matrix effect and speed keys are located on the right hand vertical nav column. + - `KC_HOME` → `RGB_MOD` + - `KC_PGUP` → `RGB_RMOD` + - `KC_PGDN` → `RGB_SPI` + - `KC_END` → `RGB_SPD` + - The RGB matrix Hue, Saturation keys are mapped to the arrow keys. + - `KC_UP` → `RGB_SAI` + - `KC_DN` → `RGB_SAD` + - `KC_LEFT` → `RGB_HUD` + - `KC_RIGHT` → `RGB_HUI` + - The RGB matrix toggle is intercepted in process_record_user() cycling through the `LED_FLAG` modifiers. (`NONE`, `UNDERGLOW`, `KEYLIGHT`, `ALL`) + - `KC_SLSH` → `RGB_TOG` + - Hibernate: `HYPER(F18)` + - `MG_F17` → `MG_F18` + + +### `_UTILITY` +*The utility layer is currently used for remapping* `KF_F9` *to* `KC_F12` *&* `MG_F17` *to the dynamic macro keys.* + - Playback + - `KC_F9` → `DM_PLY1` + - `KC_F10` → `DM_PLY2` + - Record + - `KC_F11` → `DM_REC1` + - `KC_F12` → `DM_REC2` + - Stop Recording + - `MG_F17` → `DM_RSTP` + +### `_DFUMODE` +> *The final layer is used for resetting the board or triggering an immediate shutdown.* + - DFU Mode + - `KC_ESC` → `RESET` + - Shutdown: `HYPER(F19)` + - `MG_F17` → `MG_F19` + - Encoder press, triggers debug output. + - `KC_MUTE` → `DEBUG` diff --git a/keyboards/gmmk/pro/ansi/keymaps/mattgauf/rules.mk b/keyboards/gmmk/pro/ansi/keymaps/mattgauf/rules.mk new file mode 100644 index 0000000000..76e1674d58 --- /dev/null +++ b/keyboards/gmmk/pro/ansi/keymaps/mattgauf/rules.mk @@ -0,0 +1,6 @@ +# Build rules +LIB_SRC += ansi.c +LIB_SRC += helpers.c + +# Overrides +MOUSEKEY_ENABLE = no # Mouse keys From efde8d657ac43d7b007437caa72dee96e149e94a Mon Sep 17 00:00:00 2001 From: Stefan Kerkmann Date: Fri, 17 Sep 2021 13:12:20 +0200 Subject: [PATCH 016/595] Use opendrain pin with external pullup again (#14474) --- platforms/chibios/drivers/ws2812_pwm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/platforms/chibios/drivers/ws2812_pwm.c b/platforms/chibios/drivers/ws2812_pwm.c index 54eac7b5ae..48d81cc876 100644 --- a/platforms/chibios/drivers/ws2812_pwm.c +++ b/platforms/chibios/drivers/ws2812_pwm.c @@ -46,7 +46,7 @@ # endif #else # if defined(USE_GPIOV1) -# define WS2812_OUTPUT_MODE PAL_MODE_ALTERNATE_PUSHPULL +# define WS2812_OUTPUT_MODE PAL_MODE_ALTERNATE_OPENDRAIN # else # define WS2812_OUTPUT_MODE PAL_MODE_ALTERNATE(WS2812_PWM_PAL_MODE) | PAL_OUTPUT_TYPE_OPENDRAIN | PAL_OUTPUT_SPEED_HIGHEST | PAL_PUPDR_FLOATING # endif From c9b91443e1c05900ffb007e3321446fcdb219bd2 Mon Sep 17 00:00:00 2001 From: X-Bows Tech <41098278+XBowsTech@users.noreply.github.com> Date: Sat, 18 Sep 2021 00:48:11 +0800 Subject: [PATCH 017/595] Update rules.mk for xbows keyboard (#14477) * Update rules.mk * Update rules.mk * Update rules.mk --- keyboards/xbows/knight/rules.mk | 2 +- keyboards/xbows/knight_plus/rules.mk | 2 +- keyboards/xbows/numpad/rules.mk | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-) diff --git a/keyboards/xbows/knight/rules.mk b/keyboards/xbows/knight/rules.mk index c3b73b7660..2ec14e4057 100644 --- a/keyboards/xbows/knight/rules.mk +++ b/keyboards/xbows/knight/rules.mk @@ -13,7 +13,7 @@ EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality diff --git a/keyboards/xbows/knight_plus/rules.mk b/keyboards/xbows/knight_plus/rules.mk index c3b73b7660..2ec14e4057 100644 --- a/keyboards/xbows/knight_plus/rules.mk +++ b/keyboards/xbows/knight_plus/rules.mk @@ -13,7 +13,7 @@ EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality diff --git a/keyboards/xbows/numpad/rules.mk b/keyboards/xbows/numpad/rules.mk index c3b73b7660..2ec14e4057 100644 --- a/keyboards/xbows/numpad/rules.mk +++ b/keyboards/xbows/numpad/rules.mk @@ -13,7 +13,7 @@ EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality From 40578621a76b43481116fd73b10b8cdec3d3a7ef Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Fri, 17 Sep 2021 13:00:42 -0700 Subject: [PATCH 018/595] [Keyboard] Move Moonlander off 'Proton C' board (#14478) --- keyboards/moonlander/halconf.h | 22 +++++++++++++++++++ keyboards/moonlander/mcuconf.h | 39 ++++++++++++++++++++++++++++++++++ keyboards/moonlander/rules.mk | 3 +-- 3 files changed, 62 insertions(+), 2 deletions(-) create mode 100644 keyboards/moonlander/halconf.h create mode 100644 keyboards/moonlander/mcuconf.h diff --git a/keyboards/moonlander/halconf.h b/keyboards/moonlander/halconf.h new file mode 100644 index 0000000000..46b53b1a7f --- /dev/null +++ b/keyboards/moonlander/halconf.h @@ -0,0 +1,22 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#define HAL_USE_I2C TRUE +#define HAL_USE_GPT TRUE +#define HAL_USE_DAC TRUE + +#include_next diff --git a/keyboards/moonlander/mcuconf.h b/keyboards/moonlander/mcuconf.h new file mode 100644 index 0000000000..69f458a937 --- /dev/null +++ b/keyboards/moonlander/mcuconf.h @@ -0,0 +1,39 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include_next "mcuconf.h" + +// for i2c expander, and ISSI +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE + +// for future hardwar +#undef STM32_I2C_USE_I2C2 +#define STM32_I2C_USE_I2C2 TRUE + +// for audio +#undef STM32_DAC_USE_DAC1_CH1 +#define STM32_DAC_USE_DAC1_CH1 TRUE +#undef STM32_DAC_USE_DAC1_CH2 +#define STM32_DAC_USE_DAC1_CH2 TRUE +#undef STM32_GPT_USE_TIM6 +#define STM32_GPT_USE_TIM6 TRUE +#undef STM32_GPT_USE_TIM7 +#define STM32_GPT_USE_TIM7 TRUE +#undef STM32_GPT_USE_TIM8 +#define STM32_GPT_USE_TIM8 TRUE diff --git a/keyboards/moonlander/rules.mk b/keyboards/moonlander/rules.mk index 557c2c4650..23bf7b7087 100644 --- a/keyboards/moonlander/rules.mk +++ b/keyboards/moonlander/rules.mk @@ -1,6 +1,5 @@ # MCU name MCU = STM32F303 -BOARD = QMK_PROTON_C # Bootloader selection BOOTLOADER = stm32-dfu @@ -8,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug From 0c1341daa80b79ccbef8a9e7f895552ff57456e9 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Fri, 17 Sep 2021 13:01:06 -0700 Subject: [PATCH 019/595] [Keyboard] Move Planck EZ off 'Proton C' board (#14479) --- keyboards/planck/ez/halconf.h | 23 ++++++++++++++++++++ keyboards/planck/ez/mcuconf.h | 41 +++++++++++++++++++++++++++++++++++ keyboards/planck/ez/rules.mk | 17 ++++++++------- 3 files changed, 73 insertions(+), 8 deletions(-) create mode 100644 keyboards/planck/ez/halconf.h create mode 100644 keyboards/planck/ez/mcuconf.h diff --git a/keyboards/planck/ez/halconf.h b/keyboards/planck/ez/halconf.h new file mode 100644 index 0000000000..f1044867f7 --- /dev/null +++ b/keyboards/planck/ez/halconf.h @@ -0,0 +1,23 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#define HAL_USE_I2C TRUE +#define HAL_USE_GPT TRUE +#define HAL_USE_DAC TRUE +#define HAL_USE_PWM TRUE + +#include_next diff --git a/keyboards/planck/ez/mcuconf.h b/keyboards/planck/ez/mcuconf.h new file mode 100644 index 0000000000..44035e7827 --- /dev/null +++ b/keyboards/planck/ez/mcuconf.h @@ -0,0 +1,41 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include_next "mcuconf.h" + +// for i2c expander, and ISSI +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE + +// for indicator LEDs +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE +#undef STM32_PWM_USE_TIM4 +#define STM32_PWM_USE_TIM4 TRUE + +// for audio +#undef STM32_DAC_USE_DAC1_CH1 +#define STM32_DAC_USE_DAC1_CH1 TRUE +#undef STM32_DAC_USE_DAC1_CH2 +#define STM32_DAC_USE_DAC1_CH2 TRUE +#undef STM32_GPT_USE_TIM6 +#define STM32_GPT_USE_TIM6 TRUE +#undef STM32_GPT_USE_TIM7 +#define STM32_GPT_USE_TIM7 TRUE +#undef STM32_GPT_USE_TIM8 +#define STM32_GPT_USE_TIM8 TRUE diff --git a/keyboards/planck/ez/rules.mk b/keyboards/planck/ez/rules.mk index a570a9c3cf..f17afe3629 100644 --- a/keyboards/planck/ez/rules.mk +++ b/keyboards/planck/ez/rules.mk @@ -1,6 +1,5 @@ # MCU name MCU = STM32F303 -BOARD = QMK_PROTON_C # Bootloader selection BOOTLOADER = stm32-dfu @@ -9,23 +8,25 @@ BOOTLOADER = stm32-dfu # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug +CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = yes # Audio output on port C6 -UNICODE_ENABLE = no # Unicode +AUDIO_ENABLE = yes # Audio output RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend ENCODER_ENABLE = yes RGB_MATRIX_DRIVER = IS31FL3737 LAYOUTS = ortho_4x12 planck_mit LAYOUTS_HAS_RGB = no + +RGB_MATRIX_SUPPORTED = yes +RGBLIGHT_SUPPORTED = no +BAKCLIGHT_SUPPORTED = no From 7c09b2667b49839d6c1a27133751d43642149a84 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Fri, 17 Sep 2021 20:48:14 +0000 Subject: [PATCH 020/595] Nix Studio OXALYS80 Refactor (#14473) * update grid alignment of keycodes * update key assignments on via keymap A seemingly-misplaced key assignment on Layers 1 through 3 of the via keymap led to keys being off by one in comparison to the default keymap. * switch Backslash and Backspace on via keymap base layer Matches the via keymap's key mapping to that of the default keymap. * use QMK 3-character notation in oxalys80.h * add matrix diagram; remove Planck reference * add LAYOUT_tkl_ansi and LAYOUT_tkl_ansi_wkl layout macros * add LAYOUT_tkl_ansi_tsangan macro * add ISO layouts Add LAYOUT_tkl_iso, LAYOUT_tkl_iso_tsangan, and LAYOUT_tkl_iso_wkl macros. * enable Community Layouts support * tidy up rules.mk * readme tidy-up --- keyboards/nix_studio/oxalys80/info.json | 382 ++++++++++++++++++ .../oxalys80/keymaps/default/keymap.c | 28 +- .../nix_studio/oxalys80/keymaps/via/keymap.c | 56 +-- keyboards/nix_studio/oxalys80/oxalys80.h | 194 ++++++++- keyboards/nix_studio/oxalys80/readme.md | 64 +-- keyboards/nix_studio/oxalys80/rules.mk | 10 +- 6 files changed, 640 insertions(+), 94 deletions(-) diff --git a/keyboards/nix_studio/oxalys80/info.json b/keyboards/nix_studio/oxalys80/info.json index 73277b55ab..d2fd765970 100644 --- a/keyboards/nix_studio/oxalys80/info.json +++ b/keyboards/nix_studio/oxalys80/info.json @@ -198,6 +198,101 @@ {"label":"\u2192", "x":17.25, "y":5.5} ] }, + "LAYOUT_tkl_ansi_tsangan": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":2, "y":0}, + {"label":"F2", "x":3, "y":0}, + {"label":"F3", "x":4, "y":0}, + {"label":"F4", "x":5, "y":0}, + {"label":"F5", "x":6.5, "y":0}, + {"label":"F6", "x":7.5, "y":0}, + {"label":"F7", "x":8.5, "y":0}, + {"label":"F8", "x":9.5, "y":0}, + {"label":"F9", "x":11, "y":0}, + {"label":"F10", "x":12, "y":0}, + {"label":"F11", "x":13, "y":0}, + {"label":"F12", "x":14, "y":0}, + {"label":"PrtSc", "x":15.25, "y":0}, + {"label":"Scroll Lock", "x":16.25, "y":0}, + {"label":"Pause", "x":17.25, "y":0}, + + {"label":"~", "x":0, "y":1.5}, + {"label":"!", "x":1, "y":1.5}, + {"label":"@", "x":2, "y":1.5}, + {"label":"#", "x":3, "y":1.5}, + {"label":"$", "x":4, "y":1.5}, + {"label":"%", "x":5, "y":1.5}, + {"label":"^", "x":6, "y":1.5}, + {"label":"&", "x":7, "y":1.5}, + {"label":"*", "x":8, "y":1.5}, + {"label":"(", "x":9, "y":1.5}, + {"label":")", "x":10, "y":1.5}, + {"label":"_", "x":11, "y":1.5}, + {"label":"+", "x":12, "y":1.5}, + {"label":"Bksp", "x":13, "y":1.5, "w":2}, + {"label":"Insert", "x":15.25, "y":1.5}, + {"label":"Home", "x":16.25, "y":1.5}, + {"label":"PgUp", "x":17.25, "y":1.5}, + + {"label":"Tab", "x":0, "y":2.5, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.5}, + {"label":"W", "x":2.5, "y":2.5}, + {"label":"E", "x":3.5, "y":2.5}, + {"label":"R", "x":4.5, "y":2.5}, + {"label":"T", "x":5.5, "y":2.5}, + {"label":"Y", "x":6.5, "y":2.5}, + {"label":"U", "x":7.5, "y":2.5}, + {"label":"I", "x":8.5, "y":2.5}, + {"label":"O", "x":9.5, "y":2.5}, + {"label":"P", "x":10.5, "y":2.5}, + {"label":"{", "x":11.5, "y":2.5}, + {"label":"}", "x":12.5, "y":2.5}, + {"label":"|", "x":13.5, "y":2.5, "w":1.5}, + {"label":"Delete", "x":15.25, "y":2.5}, + {"label":"End", "x":16.25, "y":2.5}, + {"label":"PgDn", "x":17.25, "y":2.5}, + + {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, + {"label":"A", "x":1.75, "y":3.5}, + {"label":"S", "x":2.75, "y":3.5}, + {"label":"D", "x":3.75, "y":3.5}, + {"label":"F", "x":4.75, "y":3.5}, + {"label":"G", "x":5.75, "y":3.5}, + {"label":"H", "x":6.75, "y":3.5}, + {"label":"J", "x":7.75, "y":3.5}, + {"label":"K", "x":8.75, "y":3.5}, + {"label":"L", "x":9.75, "y":3.5}, + {"label":":", "x":10.75, "y":3.5}, + {"label":"\"", "x":11.75, "y":3.5}, + {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, + + {"label":"Shift", "x":0, "y":4.5, "w":2.25}, + {"label":"Z", "x":2.25, "y":4.5}, + {"label":"X", "x":3.25, "y":4.5}, + {"label":"C", "x":4.25, "y":4.5}, + {"label":"V", "x":5.25, "y":4.5}, + {"label":"B", "x":6.25, "y":4.5}, + {"label":"N", "x":7.25, "y":4.5}, + {"label":"M", "x":8.25, "y":4.5}, + {"label":"<", "x":9.25, "y":4.5}, + {"label":">", "x":10.25, "y":4.5}, + {"label":"?", "x":11.25, "y":4.5}, + {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, + {"label":"\u2191", "x":16.25, "y":4.5}, + + {"label":"Ctrl", "x":0, "y":5.5, "w":1.5}, + {"label":"Win", "x":1.5, "y":5.5}, + {"label":"Alt", "x":2.5, "y":5.5, "w":1.5}, + { "x":4, "y":5.5, "w":7}, + {"label":"Win", "x":11, "y":5.5, "w":1.5}, + {"label":"Menu", "x":12.5, "y":5.5}, + {"label":"Ctrl", "x":13.5, "y":5.5, "w":1.5}, + {"label":"\u2190", "x":15.25, "y":5.5}, + {"label":"\u2193", "x":16.25, "y":5.5}, + {"label":"\u2192", "x":17.25, "y":5.5} + ] + }, "LAYOUT_tkl_ansi_wkl": { "layout": [ {"label":"Esc", "x":0, "y":0}, @@ -290,6 +385,293 @@ {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5} ] + }, + "LAYOUT_tkl_iso": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":2, "y":0}, + {"label":"F2", "x":3, "y":0}, + {"label":"F3", "x":4, "y":0}, + {"label":"F4", "x":5, "y":0}, + {"label":"F5", "x":6.5, "y":0}, + {"label":"F6", "x":7.5, "y":0}, + {"label":"F7", "x":8.5, "y":0}, + {"label":"F8", "x":9.5, "y":0}, + {"label":"F9", "x":11, "y":0}, + {"label":"F10", "x":12, "y":0}, + {"label":"F11", "x":13, "y":0}, + {"label":"F12", "x":14, "y":0}, + {"label":"PrtSc", "x":15.25, "y":0}, + {"label":"Scroll Lock", "x":16.25, "y":0}, + {"label":"Pause", "x":17.25, "y":0}, + + {"label":"~", "x":0, "y":1.5}, + {"label":"!", "x":1, "y":1.5}, + {"label":"@", "x":2, "y":1.5}, + {"label":"#", "x":3, "y":1.5}, + {"label":"$", "x":4, "y":1.5}, + {"label":"%", "x":5, "y":1.5}, + {"label":"^", "x":6, "y":1.5}, + {"label":"&", "x":7, "y":1.5}, + {"label":"*", "x":8, "y":1.5}, + {"label":"(", "x":9, "y":1.5}, + {"label":")", "x":10, "y":1.5}, + {"label":"_", "x":11, "y":1.5}, + {"label":"+", "x":12, "y":1.5}, + {"label":"Bksp", "x":13, "y":1.5, "w":2}, + {"label":"Insert", "x":15.25, "y":1.5}, + {"label":"Home", "x":16.25, "y":1.5}, + {"label":"PgUp", "x":17.25, "y":1.5}, + + {"label":"Tab", "x":0, "y":2.5, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.5}, + {"label":"W", "x":2.5, "y":2.5}, + {"label":"E", "x":3.5, "y":2.5}, + {"label":"R", "x":4.5, "y":2.5}, + {"label":"T", "x":5.5, "y":2.5}, + {"label":"Y", "x":6.5, "y":2.5}, + {"label":"U", "x":7.5, "y":2.5}, + {"label":"I", "x":8.5, "y":2.5}, + {"label":"O", "x":9.5, "y":2.5}, + {"label":"P", "x":10.5, "y":2.5}, + {"label":"{", "x":11.5, "y":2.5}, + {"label":"}", "x":12.5, "y":2.5}, + {"label":"Delete", "x":15.25, "y":2.5}, + {"label":"End", "x":16.25, "y":2.5}, + {"label":"PgDn", "x":17.25, "y":2.5}, + + {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, + {"label":"A", "x":1.75, "y":3.5}, + {"label":"S", "x":2.75, "y":3.5}, + {"label":"D", "x":3.75, "y":3.5}, + {"label":"F", "x":4.75, "y":3.5}, + {"label":"G", "x":5.75, "y":3.5}, + {"label":"H", "x":6.75, "y":3.5}, + {"label":"J", "x":7.75, "y":3.5}, + {"label":"K", "x":8.75, "y":3.5}, + {"label":"L", "x":9.75, "y":3.5}, + {"label":":", "x":10.75, "y":3.5}, + {"label":"\"", "x":11.75, "y":3.5}, + {"label":"~", "x":12.75, "y":3.5}, + {"label":"Enter", "x":13.75, "y":2.5, "w":1.25, "h":2}, + + {"label":"Shift", "x":0, "y":4.5, "w":1.25}, + {"label":"NUBS", "x":1.25, "y":4.5}, + {"label":"Z", "x":2.25, "y":4.5}, + {"label":"X", "x":3.25, "y":4.5}, + {"label":"C", "x":4.25, "y":4.5}, + {"label":"V", "x":5.25, "y":4.5}, + {"label":"B", "x":6.25, "y":4.5}, + {"label":"N", "x":7.25, "y":4.5}, + {"label":"M", "x":8.25, "y":4.5}, + {"label":"<", "x":9.25, "y":4.5}, + {"label":">", "x":10.25, "y":4.5}, + {"label":"?", "x":11.25, "y":4.5}, + {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, + {"label":"\u2191", "x":16.25, "y":4.5}, + + {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, + {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, + {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, + {"label":"Space", "x":3.75, "y":5.5, "w":6.25}, + {"label":"Alt", "x":10, "y":5.5, "w":1.25}, + {"label":"Win", "x":11.25, "y":5.5, "w":1.25}, + {"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, + {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, + {"label":"\u2190", "x":15.25, "y":5.5}, + {"label":"\u2193", "x":16.25, "y":5.5}, + {"label":"\u2192", "x":17.25, "y":5.5} + ] + }, + "LAYOUT_tkl_iso_tsangan": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":2, "y":0}, + {"label":"F2", "x":3, "y":0}, + {"label":"F3", "x":4, "y":0}, + {"label":"F4", "x":5, "y":0}, + {"label":"F5", "x":6.5, "y":0}, + {"label":"F6", "x":7.5, "y":0}, + {"label":"F7", "x":8.5, "y":0}, + {"label":"F8", "x":9.5, "y":0}, + {"label":"F9", "x":11, "y":0}, + {"label":"F10", "x":12, "y":0}, + {"label":"F11", "x":13, "y":0}, + {"label":"F12", "x":14, "y":0}, + {"label":"PrtSc", "x":15.25, "y":0}, + {"label":"Scroll Lock", "x":16.25, "y":0}, + {"label":"Pause", "x":17.25, "y":0}, + + {"label":"~", "x":0, "y":1.5}, + {"label":"!", "x":1, "y":1.5}, + {"label":"@", "x":2, "y":1.5}, + {"label":"#", "x":3, "y":1.5}, + {"label":"$", "x":4, "y":1.5}, + {"label":"%", "x":5, "y":1.5}, + {"label":"^", "x":6, "y":1.5}, + {"label":"&", "x":7, "y":1.5}, + {"label":"*", "x":8, "y":1.5}, + {"label":"(", "x":9, "y":1.5}, + {"label":")", "x":10, "y":1.5}, + {"label":"_", "x":11, "y":1.5}, + {"label":"+", "x":12, "y":1.5}, + {"label":"Bksp", "x":13, "y":1.5, "w":2}, + {"label":"Insert", "x":15.25, "y":1.5}, + {"label":"Home", "x":16.25, "y":1.5}, + {"label":"PgUp", "x":17.25, "y":1.5}, + + {"label":"Tab", "x":0, "y":2.5, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.5}, + {"label":"W", "x":2.5, "y":2.5}, + {"label":"E", "x":3.5, "y":2.5}, + {"label":"R", "x":4.5, "y":2.5}, + {"label":"T", "x":5.5, "y":2.5}, + {"label":"Y", "x":6.5, "y":2.5}, + {"label":"U", "x":7.5, "y":2.5}, + {"label":"I", "x":8.5, "y":2.5}, + {"label":"O", "x":9.5, "y":2.5}, + {"label":"P", "x":10.5, "y":2.5}, + {"label":"{", "x":11.5, "y":2.5}, + {"label":"}", "x":12.5, "y":2.5}, + {"label":"Delete", "x":15.25, "y":2.5}, + {"label":"End", "x":16.25, "y":2.5}, + {"label":"PgDn", "x":17.25, "y":2.5}, + + {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, + {"label":"A", "x":1.75, "y":3.5}, + {"label":"S", "x":2.75, "y":3.5}, + {"label":"D", "x":3.75, "y":3.5}, + {"label":"F", "x":4.75, "y":3.5}, + {"label":"G", "x":5.75, "y":3.5}, + {"label":"H", "x":6.75, "y":3.5}, + {"label":"J", "x":7.75, "y":3.5}, + {"label":"K", "x":8.75, "y":3.5}, + {"label":"L", "x":9.75, "y":3.5}, + {"label":":", "x":10.75, "y":3.5}, + {"label":"\"", "x":11.75, "y":3.5}, + {"label":"~", "x":12.75, "y":3.5}, + {"label":"Enter", "x":13.75, "y":2.5, "w":1.25, "h":2}, + + {"label":"Shift", "x":0, "y":4.5, "w":1.25}, + {"label":"NUBS", "x":1.25, "y":4.5}, + {"label":"Z", "x":2.25, "y":4.5}, + {"label":"X", "x":3.25, "y":4.5}, + {"label":"C", "x":4.25, "y":4.5}, + {"label":"V", "x":5.25, "y":4.5}, + {"label":"B", "x":6.25, "y":4.5}, + {"label":"N", "x":7.25, "y":4.5}, + {"label":"M", "x":8.25, "y":4.5}, + {"label":"<", "x":9.25, "y":4.5}, + {"label":">", "x":10.25, "y":4.5}, + {"label":"?", "x":11.25, "y":4.5}, + {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, + {"label":"\u2191", "x":16.25, "y":4.5}, + + {"label":"Ctrl", "x":0, "y":5.5, "w":1.5}, + {"label":"Win", "x":1.5, "y":5.5}, + {"label":"Alt", "x":2.5, "y":5.5, "w":1.5}, + {"label":"Space", "x":4, "y":5.5, "w":7}, + {"label":"Win", "x":11, "y":5.5, "w":1.5}, + {"label":"Menu", "x":12.5, "y":5.5}, + {"label":"Ctrl", "x":13.5, "y":5.5, "w":1.5}, + {"label":"\u2190", "x":15.25, "y":5.5}, + {"label":"\u2193", "x":16.25, "y":5.5}, + {"label":"\u2192", "x":17.25, "y":5.5} + ] + }, + "LAYOUT_tkl_iso_wkl": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":2, "y":0}, + {"label":"F2", "x":3, "y":0}, + {"label":"F3", "x":4, "y":0}, + {"label":"F4", "x":5, "y":0}, + {"label":"F5", "x":6.5, "y":0}, + {"label":"F6", "x":7.5, "y":0}, + {"label":"F7", "x":8.5, "y":0}, + {"label":"F8", "x":9.5, "y":0}, + {"label":"F9", "x":11, "y":0}, + {"label":"F10", "x":12, "y":0}, + {"label":"F11", "x":13, "y":0}, + {"label":"F12", "x":14, "y":0}, + {"label":"PrtSc", "x":15.25, "y":0}, + {"label":"Scroll Lock", "x":16.25, "y":0}, + {"label":"Pause", "x":17.25, "y":0}, + + {"label":"~", "x":0, "y":1.5}, + {"label":"!", "x":1, "y":1.5}, + {"label":"@", "x":2, "y":1.5}, + {"label":"#", "x":3, "y":1.5}, + {"label":"$", "x":4, "y":1.5}, + {"label":"%", "x":5, "y":1.5}, + {"label":"^", "x":6, "y":1.5}, + {"label":"&", "x":7, "y":1.5}, + {"label":"*", "x":8, "y":1.5}, + {"label":"(", "x":9, "y":1.5}, + {"label":")", "x":10, "y":1.5}, + {"label":"_", "x":11, "y":1.5}, + {"label":"+", "x":12, "y":1.5}, + {"label":"Bksp", "x":13, "y":1.5, "w":2}, + {"label":"Insert", "x":15.25, "y":1.5}, + {"label":"Home", "x":16.25, "y":1.5}, + {"label":"PgUp", "x":17.25, "y":1.5}, + + {"label":"Tab", "x":0, "y":2.5, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.5}, + {"label":"W", "x":2.5, "y":2.5}, + {"label":"E", "x":3.5, "y":2.5}, + {"label":"R", "x":4.5, "y":2.5}, + {"label":"T", "x":5.5, "y":2.5}, + {"label":"Y", "x":6.5, "y":2.5}, + {"label":"U", "x":7.5, "y":2.5}, + {"label":"I", "x":8.5, "y":2.5}, + {"label":"O", "x":9.5, "y":2.5}, + {"label":"P", "x":10.5, "y":2.5}, + {"label":"{", "x":11.5, "y":2.5}, + {"label":"}", "x":12.5, "y":2.5}, + {"label":"Delete", "x":15.25, "y":2.5}, + {"label":"End", "x":16.25, "y":2.5}, + {"label":"PgDn", "x":17.25, "y":2.5}, + + {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, + {"label":"A", "x":1.75, "y":3.5}, + {"label":"S", "x":2.75, "y":3.5}, + {"label":"D", "x":3.75, "y":3.5}, + {"label":"F", "x":4.75, "y":3.5}, + {"label":"G", "x":5.75, "y":3.5}, + {"label":"H", "x":6.75, "y":3.5}, + {"label":"J", "x":7.75, "y":3.5}, + {"label":"K", "x":8.75, "y":3.5}, + {"label":"L", "x":9.75, "y":3.5}, + {"label":":", "x":10.75, "y":3.5}, + {"label":"\"", "x":11.75, "y":3.5}, + {"label":"~", "x":12.75, "y":3.5}, + {"label":"Enter", "x":13.75, "y":2.5, "w":1.25, "h":2}, + + {"label":"Shift", "x":0, "y":4.5, "w":1.25}, + {"label":"NUBS", "x":1.25, "y":4.5}, + {"label":"Z", "x":2.25, "y":4.5}, + {"label":"X", "x":3.25, "y":4.5}, + {"label":"C", "x":4.25, "y":4.5}, + {"label":"V", "x":5.25, "y":4.5}, + {"label":"B", "x":6.25, "y":4.5}, + {"label":"N", "x":7.25, "y":4.5}, + {"label":"M", "x":8.25, "y":4.5}, + {"label":"<", "x":9.25, "y":4.5}, + {"label":">", "x":10.25, "y":4.5}, + {"label":"?", "x":11.25, "y":4.5}, + {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, + {"label":"\u2191", "x":16.25, "y":4.5}, + + {"label":"Ctrl", "x":0, "y":5.5, "w":1.5}, + {"label":"Alt", "x":2.5, "y":5.5, "w":1.5}, + {"label":"Space", "x":4, "y":5.5, "w":7}, + {"label":"Alt", "x":11, "y":5.5, "w":1.5}, + {"label":"Ctrl", "x":13.5, "y":5.5, "w":1.5}, + {"label":"\u2190", "x":15.25, "y":5.5}, + {"label":"\u2193", "x":16.25, "y":5.5}, + {"label":"\u2192", "x":17.25, "y":5.5} + ] } } } diff --git a/keyboards/nix_studio/oxalys80/keymaps/default/keymap.c b/keyboards/nix_studio/oxalys80/keymaps/default/keymap.c index 70d05e7b98..f2e62ec6cd 100644 --- a/keyboards/nix_studio/oxalys80/keymaps/default/keymap.c +++ b/keyboards/nix_studio/oxalys80/keymaps/default/keymap.c @@ -17,20 +17,20 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_all( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_INS, KC_HOME, KC_PGUP, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_DEL, KC_END, KC_PGDN, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_TRNS, KC_UP, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + [0] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_TRNS, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), - [1] = LAYOUT_all( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, BL_TOGG, BL_DEC, BL_INC, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_MNXT, KC_VOLD, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + [1] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, BL_TOGG, BL_DEC, BL_INC, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_MNXT, KC_VOLD, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), }; diff --git a/keyboards/nix_studio/oxalys80/keymaps/via/keymap.c b/keyboards/nix_studio/oxalys80/keymaps/via/keymap.c index a81dface97..9ad66c9239 100644 --- a/keyboards/nix_studio/oxalys80/keymaps/via/keymap.c +++ b/keyboards/nix_studio/oxalys80/keymaps/via/keymap.c @@ -17,36 +17,36 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_all( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, KC_INS, KC_HOME, KC_PGUP, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_TRNS, KC_UP, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + [0] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_TRNS, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), - [1] = LAYOUT_all( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, BL_TOGG, BL_DEC, BL_INC, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_MNXT, KC_VOLD, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + [1] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, BL_TOGG, BL_DEC, BL_INC, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_MNXT, KC_VOLD, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), - [2] = LAYOUT_all( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, BL_TOGG, BL_DEC, BL_INC, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_MNXT, KC_VOLD, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + [2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, BL_TOGG, BL_DEC, BL_INC, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_MNXT, KC_VOLD, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), - [3] = LAYOUT_all( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, BL_TOGG, BL_DEC, BL_INC, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_MNXT, KC_VOLD, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + [3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, BL_TOGG, BL_DEC, BL_INC, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_MNXT, KC_VOLD, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), }; diff --git a/keyboards/nix_studio/oxalys80/oxalys80.h b/keyboards/nix_studio/oxalys80/oxalys80.h index a4f36b2ac0..2a9f789b5d 100644 --- a/keyboards/nix_studio/oxalys80/oxalys80.h +++ b/keyboards/nix_studio/oxalys80/oxalys80.h @@ -17,29 +17,185 @@ #include "quantum.h" +#define ___ KC_NO + +/* LAYOUT_all + * ┌───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┐ + * │00 │ │01 │11 │02 │12 │ │03 │13 │04 │14 │ │05 │15 │06 │16 │ │07 │17 │08 │ + * └───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┘ + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ ┌───┬───┬───┐ ┌───────┐ + * │20 │30 │21 │31 │22 │32 │23 │33 │24 │34 │25 │35 │26 │36 │66 │ │27 │37 │28 │ │36 │ 2u Backspace + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤ ├───┼───┼───┤ └─┬─────┤ + * │40 │50 │41 │51 │42 │52 │43 │53 │44 │54 │45 │55 │46 │56 │ │47 │57 │48 │ │ │ + * 2.25u ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ └───┴───┴───┘ ┌──┴┐76 │ ISO Enter + * LShift │60 │70 │61 │71 │62 │72 │63 │73 │64 │74 │65 │75 │76 │ │56 │ │ + * ┌────────┐ ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤ ┌───┐ ┌─┴───┴────┤ + * │80 │ │80 │90 │81 │91 │82 │92 │83 │93 │84 │94 │85 │95 │86 │96 │ │97 │ │86 │ 2.75u RShift + * └────────┘ ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬┴───┤ ┌───┼───┼───┐ └──────────┘ + * │A0 │B0 │A1 │A3 │A5 │B5 │A6 │B6 │ │A7 │B7 │A8 │ + * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ └───┴───┴───┘ + * ┌─────┬───┬─────┬───────────────────────────┬─────┬───┬─────┐ + * │A0 │B0 │A1 │A3 │B5 │A6 │B6 │ Tsangan + * └─────┴───┴─────┴───────────────────────────┴─────┴───┴─────┘ + * ┌─────┬───┬─────┬───────────────────────────┬─────┬───┬─────┐ + * │A0 │ │A1 │A3 │B5 │ │B6 │ WKL + * └─────┘ └─────┴───────────────────────────┴─────┘ └─────┘ + */ + // This a shortcut to help you visually see your layout. -// The following is an example using the Planck MIT layout // The first section contains all of the arguments // The second converts the arguments into a two-dimensional array #define LAYOUT_all(\ - K000, K001, K011, K002, K012, K003, K013, K004, K014, K005, K015, K006, K016, K007, K017, K008, \ - K020, K030, K021, K031, K022, K032, K023, K033, K024, K034, K025, K035, K026, K036, K066, K027, K037, K028, \ - K040, K050, K041, K051, K042, K052, K043, K053, K044, K054, K045, K055, K046, K056, K047, K057, K048, \ - K060, K070, K061, K071, K062, K072, K063, K073, K064, K074, K065, K075, K076, \ - K080, K090, K081, K091, K082, K092, K083, K093, K084, K094, K085, K095, K086, K096, K097, \ - K100, K110, K101, K103, K105, K115, K106, K116, K107, K117, K108 \ + K00, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K16, K07, K17, K08, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K26, K36, K66, K27, K37, K28, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K46, K56, K47, K57, K48, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K76, \ + K80, K90, K81, K91, K82, K92, K83, K93, K84, K94, K85, K95, K86, K96, K97, \ + KA0, KB0, KA1, KA3, KA5, KB5, KA6, KB6, KA7, KB7, KA8 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08 }, \ + { ___, K11, K12, K13, K14, K15, K16, K17, ___ }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28 }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, ___ }, \ + { K40, K41, K42, K43, K44, K45, K46, K47, K48 }, \ + { K50, K51, K52, K53, K54, K55, K56, K57, ___ }, \ + { K60, K61, K62, K63, K64, K65, K66, ___, ___ }, \ + { K70, K71, K72, K73, K74, K75, K76, ___, ___ }, \ + { K80, K81, K82, K83, K84, K85, K86, ___, ___ }, \ + { K90, K91, K92, K93, K94, K95, K96, K97, ___ }, \ + { KA0, KA1, ___, KA3, ___, KA5, KA6, KA7, KA8 }, \ + { KB0, ___, ___, ___, ___, KB5, KB6, KB7, ___ } \ +} + +#define LAYOUT_tkl_ansi(\ + K00, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K16, K07, K17, K08, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K26, K36, K27, K37, K28, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K46, K56, K47, K57, K48, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K76, \ + K80, K81, K91, K82, K92, K83, K93, K84, K94, K85, K95, K86, K97, \ + KA0, KB0, KA1, KA3, KA5, KB5, KA6, KB6, KA7, KB7, KA8 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08 }, \ + { ___, K11, K12, K13, K14, K15, K16, K17, ___ }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28 }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, ___ }, \ + { K40, K41, K42, K43, K44, K45, K46, K47, K48 }, \ + { K50, K51, K52, K53, K54, K55, K56, K57, ___ }, \ + { K60, K61, K62, K63, K64, K65, ___, ___, ___ }, \ + { K70, K71, K72, K73, K74, K75, K76, ___, ___ }, \ + { K80, K81, K82, K83, K84, K85, K86, ___, ___ }, \ + { ___, K91, K92, K93, K94, K95, ___, K97, ___ }, \ + { KA0, KA1, ___, KA3, ___, KA5, KA6, KA7, KA8 }, \ + { KB0, ___, ___, ___, ___, KB5, KB6, KB7, ___ } \ +} + +#define LAYOUT_tkl_ansi_tsangan(\ + K00, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K16, K07, K17, K08, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K26, K36, K27, K37, K28, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K46, K56, K47, K57, K48, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K76, \ + K80, K81, K91, K82, K92, K83, K93, K84, K94, K85, K95, K86, K97, \ + KA0, KB0, KA1, KA3, KB5, KA6, KB6, KA7, KB7, KA8 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08 }, \ + { ___, K11, K12, K13, K14, K15, K16, K17, ___ }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28 }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, ___ }, \ + { K40, K41, K42, K43, K44, K45, K46, K47, K48 }, \ + { K50, K51, K52, K53, K54, K55, K56, K57, ___ }, \ + { K60, K61, K62, K63, K64, K65, ___, ___, ___ }, \ + { K70, K71, K72, K73, K74, K75, K76, ___, ___ }, \ + { K80, K81, K82, K83, K84, K85, K86, ___, ___ }, \ + { ___, K91, K92, K93, K94, K95, ___, K97, ___ }, \ + { KA0, KA1, ___, KA3, ___, ___, KA6, KA7, KA8 }, \ + { KB0, ___, ___, ___, ___, KB5, KB6, KB7, ___ } \ +} + +#define LAYOUT_tkl_ansi_wkl(\ + K00, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K16, K07, K17, K08, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K26, K36, K27, K37, K28, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K46, K56, K47, K57, K48, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K76, \ + K80, K81, K91, K82, K92, K83, K93, K84, K94, K85, K95, K86, K97, \ + KA0, KA1, KA3, KB5, KB6, KA7, KB7, KA8 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08 }, \ + { ___, K11, K12, K13, K14, K15, K16, K17, ___ }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28 }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, ___ }, \ + { K40, K41, K42, K43, K44, K45, K46, K47, K48 }, \ + { K50, K51, K52, K53, K54, K55, K56, K57, ___ }, \ + { K60, K61, K62, K63, K64, K65, ___, ___, ___ }, \ + { K70, K71, K72, K73, K74, K75, K76, ___, ___ }, \ + { K80, K81, K82, K83, K84, K85, K86, ___, ___ }, \ + { ___, K91, K92, K93, K94, K95, ___, K97, ___ }, \ + { KA0, KA1, ___, KA3, ___, ___, ___, KA7, KA8 }, \ + { ___, ___, ___, ___, ___, KB5, KB6, KB7, ___ } \ +} + +#define LAYOUT_tkl_iso(\ + K00, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K16, K07, K17, K08, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K26, K36, K27, K37, K28, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K46, K47, K57, K48, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K56, K76, \ + K80, K90, K81, K91, K82, K92, K83, K93, K84, K94, K85, K95, K86, K97, \ + KA0, KB0, KA1, KA3, KA5, KB5, KA6, KB6, KA7, KB7, KA8 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08 }, \ + { ___, K11, K12, K13, K14, K15, K16, K17, ___ }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28 }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, ___ }, \ + { K40, K41, K42, K43, K44, K45, K46, K47, K48 }, \ + { K50, K51, K52, K53, K54, K55, K56, K57, ___ }, \ + { K60, K61, K62, K63, K64, K65, ___, ___, ___ }, \ + { K70, K71, K72, K73, K74, K75, K76, ___, ___ }, \ + { K80, K81, K82, K83, K84, K85, K86, ___, ___ }, \ + { K90, K91, K92, K93, K94, K95, ___, K97, ___ }, \ + { KA0, KA1, ___, KA3, ___, KA5, KA6, KA7, KA8 }, \ + { KB0, ___, ___, ___, ___, KB5, KB6, KB7, ___ } \ +} + +#define LAYOUT_tkl_iso_tsangan(\ + K00, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K16, K07, K17, K08, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K26, K36, K27, K37, K28, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K46, K47, K57, K48, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K56, K76, \ + K80, K90, K81, K91, K82, K92, K83, K93, K84, K94, K85, K95, K86, K97, \ + KA0, KB0, KA1, KA3, KB5, KA6, KB6, KA7, KB7, KA8 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08 }, \ + { ___, K11, K12, K13, K14, K15, K16, K17, ___ }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28 }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, ___ }, \ + { K40, K41, K42, K43, K44, K45, K46, K47, K48 }, \ + { K50, K51, K52, K53, K54, K55, K56, K57, ___ }, \ + { K60, K61, K62, K63, K64, K65, ___, ___, ___ }, \ + { K70, K71, K72, K73, K74, K75, K76, ___, ___ }, \ + { K80, K81, K82, K83, K84, K85, K86, ___, ___ }, \ + { K90, K91, K92, K93, K94, K95, ___, K97, ___ }, \ + { KA0, KA1, ___, KA3, ___, ___, KA6, KA7, KA8 }, \ + { KB0, ___, ___, ___, ___, KB5, KB6, KB7, ___ } \ +} + +#define LAYOUT_tkl_iso_wkl(\ + K00, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K16, K07, K17, K08, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K26, K36, K27, K37, K28, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K46, K47, K57, K48, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K56, K76, \ + K80, K90, K81, K91, K82, K92, K83, K93, K84, K94, K85, K95, K86, K97, \ + KA0, KA1, KA3, KB5, KB6, KA7, KB7, KA8 \ ) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008 }, \ - { KC_NO, K011, K012, K013, K014, K015, K016, K017, KC_NO }, \ - { K020, K021, K022, K023, K024, K025, K026, K027, K028 }, \ - { K030, K031, K032, K033, K034, K035, K036, K037, KC_NO }, \ - { K040, K041, K042, K043, K044, K045, K046, K047, K048 }, \ - { K050, K051, K052, K053, K054, K055, K056, K057, KC_NO }, \ - { K060, K061, K062, K063, K064, K065, K066, KC_NO, KC_NO }, \ - { K070, K071, K072, K073, K074, K075, K076, KC_NO, KC_NO }, \ - { K080, K081, K082, K083, K084, K085, K086, KC_NO, KC_NO }, \ - { K090, K091, K092, K093, K094, K095, K096, K097, KC_NO }, \ - { K100, K101, KC_NO, K103, KC_NO, K105, K106, K107, K108 }, \ - { K110, KC_NO, KC_NO, KC_NO, KC_NO, K115, K116, K117, KC_NO } \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08 }, \ + { ___, K11, K12, K13, K14, K15, K16, K17, ___ }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28 }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, ___ }, \ + { K40, K41, K42, K43, K44, K45, K46, K47, K48 }, \ + { K50, K51, K52, K53, K54, K55, K56, K57, ___ }, \ + { K60, K61, K62, K63, K64, K65, ___, ___, ___ }, \ + { K70, K71, K72, K73, K74, K75, K76, ___, ___ }, \ + { K80, K81, K82, K83, K84, K85, K86, ___, ___ }, \ + { K90, K91, K92, K93, K94, K95, ___, K97, ___ }, \ + { KA0, KA1, ___, KA3, ___, ___, ___, KA7, KA8 }, \ + { ___, ___, ___, ___, ___, KB5, KB6, KB7, ___ } \ } diff --git a/keyboards/nix_studio/oxalys80/readme.md b/keyboards/nix_studio/oxalys80/readme.md index 44ad7e8286..a1b009ebe5 100644 --- a/keyboards/nix_studio/oxalys80/readme.md +++ b/keyboards/nix_studio/oxalys80/readme.md @@ -1,43 +1,49 @@ -oxalys80 -=== +# OXALYS80 -A QMK-powered replacement PCB for custom TKL keyboards. This PCB has the same size of the b.87 PCB, Hiney H87a, KBD8X. +A QMK-powered replacement PCB for custom TKL keyboards. This PCB has the same size of the b.87 PCB, Hiney H87a, and KBD8X. -Keyboard Maintainer: [Nix Studio](https://github.com/Nix-Studio) -Hardware Supported: oxalys80 ver. 1.0 -Hardware Availability: [Nix Studio](https://www.instagram.com/nix.studio/) +* Keyboard Maintainer: [Nix Studio](https://github.com/Nix-Studio) +* Hardware Supported: oxalys80 ver. 1.0 +* Hardware Availability: [Nix Studio](https://www.instagram.com/nix.studio/) Make example for this keyboard (after setting up your build environment): - - make nix_studio/oxalys80:default - + + make nix_studio/oxalys80:default + +Flashing example for this keyboard: + + make nix_studio/oxalys80:default:flash + See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). -## oxalys80 hardware information +## OXALYS80 Hardware Information + +Controller: ATmega32U4 + +### Column Pin Configuration + +| col: | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | +|------|----|----|----|----|----|----|----|----|----| +| pin: | F0 | F1 | F4 | F5 | F6 | F7 | C7 | B0 | B1 | + +### Row Pin Configuration + +| row: | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | +|------|----|----|----|----|----|----|----|----|----|----|----|----| +| pin: | C6 | B6 | B5 | B4 | D7 | D6 | D4 | D5 | D3 | D2 | D1 | D0 | -Controller: Atmega32u4 +The OXALYS80 PCB utilizes duplex matrix organization. - /* Column pin configuration - * col: 0 1 2 3 4 5 6 7 8 - * pin: F0 F1 F4 F5 F6 F7 C7 B0 B1 - */ - - /* Row pin configuration - * row: 0 1 2 3 4 5 6 7 8 9 10 11 - * pin: C6 B6 B5 B4 D7 D6 D4 D5 D3 D2 D1 D0 - */ - -The oxalys PCB utilizes duplex matrix organization. +### LED Pins - Caps Lock LED: E6 - Scroll Lock LED: B2 - Num Lock LED: not supported - Backlight Pin: B7 - RGB Data Pin: B3 - +* Caps Lock LED: E6 +* Scroll Lock LED: B2 +* Num Lock LED: not supported +* Backlight Pin: B7 +* RGB Data Pin: B3 +## In-switch Indicators -In-switch indicators: To connect the Caps Lock LED to the main backlight matrix, turn switch to top position on SW3. To use the Caps Lock LED as an indicator, turn switch to bottom position on SW3. To connect the Scroll Lock LED to the main backlight matrix, turn switch to left position on SW2. To use the Scroll Lock LED as an indicator, turn switch to right position on SW2. diff --git a/keyboards/nix_studio/oxalys80/rules.mk b/keyboards/nix_studio/oxalys80/rules.mk index cc0852eada..3da643f9ff 100644 --- a/keyboards/nix_studio/oxalys80/rules.mk +++ b/keyboards/nix_studio/oxalys80/rules.mk @@ -10,14 +10,16 @@ BOOTLOADER = atmel-dfu BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable RGB underglow -UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth AUDIO_ENABLE = no # Audio output LTO_ENABLE = yes + +LAYOUTS = tkl_ansi tkl_iso From f93597d66b0698cbea87b24aad79f60e5a9db6ad Mon Sep 17 00:00:00 2001 From: Takeshi ISHII <2170248+mtei@users.noreply.github.com> Date: Sat, 18 Sep 2021 11:51:04 +0900 Subject: [PATCH 021/595] fix link error for helix/rev3_5rows:five_rows (#14466) This is a tentative quick fix. I was adding the same functions for both #14426 and #14427 and they were in conflict. --- .../keymaps/five_rows/oled_display.c | 53 ++----------------- 1 file changed, 4 insertions(+), 49 deletions(-) diff --git a/keyboards/helix/rev3_5rows/keymaps/five_rows/oled_display.c b/keyboards/helix/rev3_5rows/keymaps/five_rows/oled_display.c index fcbd81c9b6..e8ba0d720f 100644 --- a/keyboards/helix/rev3_5rows/keymaps/five_rows/oled_display.c +++ b/keyboards/helix/rev3_5rows/keymaps/five_rows/oled_display.c @@ -25,6 +25,10 @@ #include #include "layer_number.h" +char *sprints(char *buf, char *src); +char *sprintd(char *buf, char *leadstr, int data); +char *sprint2d(char *buf, char *leadstr, int data); + extern int current_default_layer; void init_helix_oled(void) { @@ -64,55 +68,6 @@ void matrix_update(struct CharacterMatrix *dest, } # endif -static char *sprint_decimal(char *buf, int data) { - if (data > 9) { - buf = sprint_decimal(buf, data/10); - } - *buf++ = "0123456789"[data%10]; - *buf = '\0'; - return buf; -} - -static char *sprint_hex(char *buf, uint32_t data) { - if (data > 0xf) { - buf = sprint_hex(buf, data/0x10); - } - *buf++ = "0123456789abcdef"[data & 0xf]; - *buf = '\0'; - return buf; -} - -char *sprints(char *buf, char *src) { - while (*src) { - *buf++ = *src++; - } - *buf = '\0'; - return buf; -} - -char *sprintx(char *buf, char *leadstr, uint32_t data) { - buf = sprints(buf, leadstr); - buf = sprint_hex(buf, data); - return buf; -} - -char *sprintd(char *buf, char *leadstr, int data) { - buf = sprints(buf, leadstr); - buf = sprint_decimal(buf, data); - return buf; -} - -char *sprint2d(char *buf, char *leadstr, int data) { - buf = sprints(buf, leadstr); - if (data > 99) { - return sprint_decimal(buf, data); - } - if (data < 10) { - *buf++ = ' '; - } - return sprint_decimal(buf, data); -} - # ifdef SSD1306OLED static void render_logo(struct CharacterMatrix *matrix) { # else From 228c7b095b0f441652b2719713cb3bf1e5811828 Mon Sep 17 00:00:00 2001 From: john-ezra <47311764+john-ezra@users.noreply.github.com> Date: Fri, 17 Sep 2021 23:51:09 -0700 Subject: [PATCH 022/595] [Keymap] Major Updates to Personal Kyria Keymap (#14485) * added john ezra keymap with updates * changed tapping term --- .../splitkb/kyria/keymaps/john-ezra/config.h | 17 +- .../splitkb/kyria/keymaps/john-ezra/keymap.c | 212 +++++++++--------- .../splitkb/kyria/keymaps/john-ezra/oled.c | 6 +- .../splitkb/kyria/keymaps/john-ezra/rules.mk | 1 + 4 files changed, 112 insertions(+), 124 deletions(-) diff --git a/keyboards/splitkb/kyria/keymaps/john-ezra/config.h b/keyboards/splitkb/kyria/keymaps/john-ezra/config.h index 3602b560c1..77f095767d 100644 --- a/keyboards/splitkb/kyria/keymaps/john-ezra/config.h +++ b/keyboards/splitkb/kyria/keymaps/john-ezra/config.h @@ -21,16 +21,11 @@ #endif #ifdef RGBLIGHT_ENABLE -#define RGBLIGHT_EFFECT_BREATHING -#define RGBLIGHT_EFFECT_RAINBOW_MOOD -#define RGBLIGHT_EFFECT_RAINBOW_SWIRL -#define RGBLIGHT_EFFECT_SNAKE -#define RGBLIGHT_EFFECT_KNIGHT -#define RGBLIGHT_EFFECT_CHRISTMAS -#define RGBLIGHT_EFFECT_STATIC_GRADIENT -#define RGBLIGHT_EFFECT_RGB_TEST -#define RGBLIGHT_EFFECT_ALTERNATING -#define RGBLIGHT_EFFECT_TWINKLE + #define RGBLIGHT_EFFECT_RAINBOW_MOOD + #define RGBLIGHT_EFFECT_RAINBOW_SWIRL + #define RGBLIGHT_EFFECT_STATIC_GRADIENT + #define RGBLIGHT_EFFECT_TWINKLE + #define RGBLIGHT_HUE_STEP 8 #define RGBLIGHT_SAT_STEP 8 #define RGBLIGHT_VAL_STEP 8 @@ -40,4 +35,6 @@ #undef DEBOUNCE #define DEBOUNCE 1 +#define TAPPING_TERM 125 + #define SPLIT_WPM_ENABLE diff --git a/keyboards/splitkb/kyria/keymaps/john-ezra/keymap.c b/keyboards/splitkb/kyria/keymaps/john-ezra/keymap.c index 3664fdfacf..f42cbf1d04 100644 --- a/keyboards/splitkb/kyria/keymaps/john-ezra/keymap.c +++ b/keyboards/splitkb/kyria/keymaps/john-ezra/keymap.c @@ -18,7 +18,6 @@ enum kyria_layers { _HNTS, - _QWERTY, _LOWER, _RAISE, _ADJUST @@ -26,17 +25,20 @@ enum kyria_layers { enum kyria_keycodes { HNTS = SAFE_RANGE, - QWERTY, LOWER, RAISE, CPY_PST, - UNDO + UNDO, + FIND }; +#define HNTS DF(_HNTS) +#define QWERTY DF(_QWERTY) #define BSP_CMD MT(MOD_LGUI, KC_BSPC) #define SFT_ENT MT(MOD_LSFT, KC_ENT) #define UNDO G(KC_Z) #define FIND G(KC_F) +#define MSS_CTL C(KC_UP) const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { @@ -44,83 +46,62 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * Default: HNTS * * ,-----------------------------------------------. ,-----------------------------------------------. - * | ` | Z | R | L | D | W | | Y | P | U | X | Q | | \ | + * | Find | Z | R | L | D | W | | Y | P | U | X | Q | | \ | * |-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------| - * | Esc | H | N | T | S | C | | B | I | E | O | A | Esc | + * |Cpy/Pst| H | N | T | S | C | | B | I | E | O | A | ` ~ | * |-------+-------+-------+-------+-------+-------+---------------. ,---------------+-------+-------+-------+-------+-------+-------| - * |Cpy/Pst| K | V | M | F | G | Ctrl | Alt | | Caps | Del | J | ; : | , < | . > | / ? | ' " | + * | Undo | K | V | M | F | G | Esc |MssnCtl| |MssnCtl| Esc | J | ; : | , < | . > | / ? | ' " | * `-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-----------------------' - * | Up | Down | Lower | Space | BSPC | | Tab | Shift | Raise | Left | Right | + * | Ctrl | Alt | Lower | Space | BSPC | | Tab | Shift | Raise | Del | Caps | * `---------------------------------------' `---------------------------------------' */ [_HNTS] = LAYOUT( FIND, KC_Z, KC_R, KC_L, KC_D, KC_W, KC_Y, KC_P, KC_U, KC_X, KC_Q, KC_BSLS, - CPY_PST, KC_H, KC_N, KC_T, KC_S, KC_C, KC_B, KC_I, KC_E, KC_O, KC_A, KC_ESC, - UNDO, KC_K, KC_V, KC_M, KC_F, KC_G, KC_LCTL, KC_LALT, KC_CAPS, KC_DEL, KC_J, KC_SCLN, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT, - KC_UP, KC_DOWN, LOWER, KC_SPC, BSP_CMD, KC_TAB, SFT_ENT, RAISE, KC_LEFT, KC_RGHT + CPY_PST, KC_H, KC_N, KC_T, KC_S, KC_C, KC_B, KC_I, KC_E, KC_O, KC_A, KC_GRV, + UNDO, KC_K, KC_V, KC_M, KC_F, KC_G, KC_ESC, MSS_CTL, MSS_CTL, KC_ESC, KC_J, KC_SCLN, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT, + KC_LCTL, KC_LALT, LOWER, KC_SPC, BSP_CMD, KC_TAB, SFT_ENT, RAISE, KC_DEL, KC_CAPS ), /* - * Default: QWERTY + * Lower: Symbols & Media * * ,-----------------------------------------------. ,-----------------------------------------------. - * | ` | Q | W | E | R | T | | Y | U | I | O | P | | \ | + * | Tab | * | / | + | - | = | | | | { | } | @ | ! | ` | * |-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------| - * | Esc | A | S | D | F | G | | H | J | K | L | ; | ' " | + * | Enter | Left | Up | Down | Right | | | \ | ( | ) | $ | # | ~ | * |-------+-------+-------+-------+-------+-------+---------------. ,---------------+-------+-------+-------+-------+-------+-------| - * |Cpy/Pst| Z | X | C | V | B | Ctrl | Alt | | Caps | Del | N | M | , < | . > | / ? |Cpy/Pst| - * `-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-----------------------' - * | Up | Down | Lower | Space | BSPC | | Tab | Shift | Raise | Left | Right | - * `---------------------------------------' `---------------------------------------' - */ - -[_QWERTY] = LAYOUT( - KC_GRV, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, - KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, - CPY_PST, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LCTL, KC_LALT, KC_CAPS, KC_DEL, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, CPY_PST, - KC_UP, KC_DOWN, LOWER, KC_SPC, BSP_CMD, KC_TAB, SFT_ENT, RAISE, KC_LEFT, KC_RGHT -), - -/* - * Lower: Symbols - * - * ,-----------------------------------------------. ,-----------------------------------------------. - * | | ! | @ | { | } | | | | | | | | | | \ | - * |-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------| - * | | # | $ | ( | ) | ` ~ | | + | - | * | / | = | | - * |-------+-------+-------+-------+-------+-------+---------------. ,---------------+-------+-------+-------+-------+-------+-------| - * | | % | ^ | [ | ] | & | | | | | | | | | | | | + * | Esc | Vol- | Vol+ | Prev | Play | Next | | | | | | _ | [ | ] | ^ | % | & | * `-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-----------------------' * | | | | | | | | | | | | * `---------------------------------------' `---------------------------------------' */ [_LOWER] = LAYOUT( - KC_GRV, KC_EXLM, KC_AT, KC_LCBR, KC_RCBR, KC_PIPE, _______, _______, _______, _______, _______, _______, - KC_TILD, KC_HASH, KC_DLR, KC_LPRN, KC_RPRN, KC_BSLS, KC_PLUS, KC_MINS, KC_ASTR, KC_SLSH, KC_EQL, _______, - KC_AMPR, KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_UNDS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + KC_TAB, KC_ASTR, KC_SLSH, KC_PLUS, KC_MINS, KC_EQL, KC_PIPE, KC_LCBR, KC_RCBR, KC_AT, KC_EXLM, KC_GRV, + KC_ENT, KC_LEFT, KC_UP, KC_DOWN, KC_RGHT, _______, KC_BSLS, KC_LPRN, KC_RPRN, KC_DLR, KC_HASH, KC_TILD, + KC_ESC, KC_VOLD, KC_VOLU, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, _______, KC_UNDS, KC_LBRC, KC_RBRC, KC_CIRC, KC_PERC, KC_AMPR, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), /* - * Raise: Numbers & Media + * Raise: Numbers * * ,-----------------------------------------------. ,-----------------------------------------------. - * | | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | | + * | | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | F11 | * |-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------| - * | | Prev | Play | Next | VolUp | Mute | |Bright+| Left | Down | Up | Right | | + * | | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | F12 | * |-------+-------+-------+-------+-------+-------+---------------. ,---------------+-------+-------+-------+-------+-------+-------| - * | | | | | VolDn | | | | | | |Bright-| | | | | | + * | | | | | | | | | | | | | Left | Up | Down | Right | Esc | * `-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-----------------------' * | | | | | | | | | | | | * `---------------------------------------' `---------------------------------------' */ [_RAISE] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, - _______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, - KC_VOLD, KC_VOLU, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + _______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_F12, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_UP, KC_DOWN, KC_RGHT, KC_ESC, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), @@ -128,86 +109,95 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * Adjust: Function Keys & RGB * * ,-----------------------------------------------. ,-----------------------------------------------. - * | | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | | + * | Reset | | | | | | | | NKRO |CG SWAP| | | HNTS | * |-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------| - * | | TOG | SAI | HUI | VAI | MOD | | | | | F11 | F12 | NKRO | + * | | TOG | SAI | HUI | VAI | MOD | | | | | | | | * |-------+-------+-------+-------+-------+-------+---------------. ,---------------+-------+-------+-------+-------+-------+-------| - * | | | SAD | HUD | VAD | RMOD | | | | | | | | | | | | + * | | | SAD | HUD | VAD | RMOD | | | | | | | |Bright+|Bright-| | | * `-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-----------------------' * | | | | | | | | | | | | * `---------------------------------------' `---------------------------------------' */ [_ADJUST] = LAYOUT( - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, NK_TOGG, - _______, RGB_TOG, RGB_SAI, RGB_HUI, RGB_VAI, RGB_MOD, KC_BRIU, _______, _______, KC_F11, KC_F12, CG_TOGG, - _______, _______, RGB_SAD, RGB_HUD, RGB_VAD,RGB_RMOD,_______, _______, _______, _______, KC_BRID, _______, _______, _______, QWERTY, HNTS, + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, HNTS, + _______, RGB_TOG, RGB_SAI, RGB_HUI, RGB_VAI, RGB_MOD, CG_TOGG, NK_TOGG, KC_BRID, KC_BRIU, _______, _______, + _______, _______, RGB_SAD, RGB_HUD, RGB_VAD,RGB_RMOD,_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), }; bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { - case HNTS: //Layer Control - if (record->event.pressed) { - set_single_persistent_default_layer(_HNTS); - } - return false; - break; - case QWERTY: - if (record->event.pressed) { - set_single_persistent_default_layer(_QWERTY); - } - return false; - break; - case LOWER: - if (record->event.pressed) { - layer_on(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_LOWER); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case RAISE: - if (record->event.pressed) { - layer_on(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } else { - layer_off(_RAISE); - update_tri_layer(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case CPY_PST: // One key copy/paste - { - static uint16_t copy_paste_timer; - if (record->event.pressed) { - copy_paste_timer = timer_read(); - } else { - if (timer_elapsed(copy_paste_timer) > TAPPING_TERM) { // Hold, copy - register_mods(mod_config(MOD_LGUI)); - tap_code(KC_C); - unregister_mods(mod_config(MOD_LGUI)); - } else { // Tap, paste - register_mods(mod_config(MOD_LGUI)); - tap_code(KC_V); - unregister_mods(mod_config(MOD_LGUI)); - } - } - } - break; - case UNDO: // Undo Redo - if ((get_mods() & MOD_BIT(KC_LGUI)) == MOD_BIT(KC_LGUI)) { - if (record->event.pressed) { - register_code(KC_Y); - } else { - unregister_code(KC_Y); - } - return false; - } - return true; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case CPY_PST: // Hold to Copy, Hold with GUI to Cut, Tap to Paste + { + static uint16_t copy_paste_timer; + if (record->event.pressed) { + copy_paste_timer = timer_read(); + } else { + if (timer_elapsed(copy_paste_timer) > TAPPING_TERM) { + if (get_mods() & MOD_MASK_GUI) { + tap_code16(LGUI(KC_X)); + } else { + tap_code16(LGUI(KC_C)); + } + } else { + tap_code16(LGUI(KC_V)); + } + } + } + break; + case UNDO: // Tap to Undo, Tap with GUI to Redo + if (get_mods() & MOD_MASK_GUI) { + if (record->event.pressed) { + tap_code(KC_Y); + } + return false; + } + break; + case FIND: // Tap to Find, Tap with GUI to Select All + if (get_mods() & MOD_MASK_GUI) { + if (record->event.pressed) { + tap_code(KC_A); + } + return false; + } + break; } return true; }; + +const key_override_t ctrl_h = ko_make_basic(MOD_MASK_CTRL, KC_H, C(KC_LEFT)); //MocOS Desktop Navigation +const key_override_t ctrl_n = ko_make_basic(MOD_MASK_CTRL, KC_N, C(KC_UP)); //MocOS Desktop Navigation +const key_override_t ctrl_t = ko_make_basic(MOD_MASK_CTRL, KC_T, C(KC_DOWN)); //MocOS Desktop Navigation +const key_override_t ctrl_s = ko_make_basic(MOD_MASK_CTRL, KC_S, C(KC_RGHT)); //MocOS Desktop Navigation +const key_override_t bsp_del = ko_make_basic(MOD_MASK_SHIFT, BSP_CMD, KC_DEL); // Shift+Bksp sends Delete + +const key_override_t **key_overrides = (const key_override_t *[]){ + &ctrl_h, + &ctrl_n, + &ctrl_t, + &ctrl_s, + &bsp_del, + NULL +}; diff --git a/keyboards/splitkb/kyria/keymaps/john-ezra/oled.c b/keyboards/splitkb/kyria/keymaps/john-ezra/oled.c index d98cd598bc..e027839124 100644 --- a/keyboards/splitkb/kyria/keymaps/john-ezra/oled.c +++ b/keyboards/splitkb/kyria/keymaps/john-ezra/oled.c @@ -113,13 +113,13 @@ static void render_status(void) { case 0: oled_write_P(PSTR("Default\n"), false); break; - case 2: + case 1: oled_write_P(PSTR("Lower\n"), false); break; - case 3: + case 2: oled_write_P(PSTR("Raise\n"), false); break; - case 4: + case 3: oled_write_P(PSTR("Adjust\n"), false); break; default: diff --git a/keyboards/splitkb/kyria/keymaps/john-ezra/rules.mk b/keyboards/splitkb/kyria/keymaps/john-ezra/rules.mk index 7fca028d22..b86789c09c 100644 --- a/keyboards/splitkb/kyria/keymaps/john-ezra/rules.mk +++ b/keyboards/splitkb/kyria/keymaps/john-ezra/rules.mk @@ -7,5 +7,6 @@ SPACE_CADET_ENABLE = no # Disable Space Cadet Shift GRAVE_ESC_ENABLE = no # Disable Grave Escape MOUSEKEY_ENABLE = no # Disable Mousekeys WPM_ENABLE = yes # Enable WPM Counter (Works with default wpm files, but works better with vectorstorm updated wpm.c and wpm.h -> https://github.com/vectorstorm/qmk_firmware/tree/wpm_exact) +KEY_OVERRIDE_ENABLE = yes # Enable Key Overrides SRC += oled.c From 09b66c06d4fa0f2db1340e9f9b89ab27235bb500 Mon Sep 17 00:00:00 2001 From: Dao Tak Isaac Date: Sat, 18 Sep 2021 13:52:18 +0700 Subject: [PATCH 023/595] [Keyboard] Add Dosa40RGB + dtisaac01 (#14476) --- keyboards/dtisaac/dosa40rgb/config.h | 73 +++++++++++ keyboards/dtisaac/dosa40rgb/dosa40rgb.c | 39 ++++++ keyboards/dtisaac/dosa40rgb/dosa40rgb.h | 40 ++++++ keyboards/dtisaac/dosa40rgb/info.json | 53 ++++++++ .../dosa40rgb/keymaps/default/keymap.c | 122 ++++++++++++++++++ .../dosa40rgb/keymaps/default/readme.md | 1 + keyboards/dtisaac/dosa40rgb/readme.md | 25 ++++ keyboards/dtisaac/dosa40rgb/rules.mk | 25 ++++ .../{handwired => dtisaac}/dtisaac01/config.h | 0 .../dtisaac01/dtisaac01.c | 0 .../dtisaac01/dtisaac01.h | 0 .../dtisaac01/info.json | 0 .../dtisaac01/keymaps/default/keymap.c | 0 .../dtisaac01/keymaps/default/readme.md | 0 .../dtisaac/dtisaac01/keymaps/via/keymap.c | 59 +++++++++ .../dtisaac/dtisaac01/keymaps/via/readme.md | 1 + .../dtisaac/dtisaac01/keymaps/via/rules.mk | 1 + .../dtisaac01/readme.md | 0 .../{handwired => dtisaac}/dtisaac01/rules.mk | 0 19 files changed, 439 insertions(+) create mode 100644 keyboards/dtisaac/dosa40rgb/config.h create mode 100644 keyboards/dtisaac/dosa40rgb/dosa40rgb.c create mode 100644 keyboards/dtisaac/dosa40rgb/dosa40rgb.h create mode 100644 keyboards/dtisaac/dosa40rgb/info.json create mode 100644 keyboards/dtisaac/dosa40rgb/keymaps/default/keymap.c create mode 100644 keyboards/dtisaac/dosa40rgb/keymaps/default/readme.md create mode 100644 keyboards/dtisaac/dosa40rgb/readme.md create mode 100644 keyboards/dtisaac/dosa40rgb/rules.mk rename keyboards/{handwired => dtisaac}/dtisaac01/config.h (100%) rename keyboards/{handwired => dtisaac}/dtisaac01/dtisaac01.c (100%) rename keyboards/{handwired => dtisaac}/dtisaac01/dtisaac01.h (100%) rename keyboards/{handwired => dtisaac}/dtisaac01/info.json (100%) rename keyboards/{handwired => dtisaac}/dtisaac01/keymaps/default/keymap.c (100%) rename keyboards/{handwired => dtisaac}/dtisaac01/keymaps/default/readme.md (100%) create mode 100644 keyboards/dtisaac/dtisaac01/keymaps/via/keymap.c create mode 100644 keyboards/dtisaac/dtisaac01/keymaps/via/readme.md create mode 100644 keyboards/dtisaac/dtisaac01/keymaps/via/rules.mk rename keyboards/{handwired => dtisaac}/dtisaac01/readme.md (100%) rename keyboards/{handwired => dtisaac}/dtisaac01/rules.mk (100%) diff --git a/keyboards/dtisaac/dosa40rgb/config.h b/keyboards/dtisaac/dosa40rgb/config.h new file mode 100644 index 0000000000..52891c4aa5 --- /dev/null +++ b/keyboards/dtisaac/dosa40rgb/config.h @@ -0,0 +1,73 @@ +/* +Copyright 2021 DTIsaac + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4454 // DT +#define PRODUCT_ID 0x4973 // Is +#define DEVICE_VER 0x0004 +#define MANUFACTURER DTIsaac +#define PRODUCT >_Dosa40 + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 11 + +/* AdafruitBle Pin */ +#define AdafruitBleResetPin D4 +#define AdafruitBleCSPin B4 +#define AdafruitBleIRQPin E6 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { B7, D7, F1, F0 } +#define MATRIX_COL_PINS { D1, D6, D3, D2, B6, C6, C7, F7, F6, F5, F4 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +#ifdef RGB_MATRIX_ENABLE +#define RGB_DI_PIN D0 +#define DRIVER_LED_TOTAL 42 +#define RGB_MATRIX_KEYPRESSES // reacts to keypresses +#define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses) +#define RGB_MATRIX_FRAMEBUFFER_EFFECTS +#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects +// #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended +#define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) +#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 +#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION \ No newline at end of file diff --git a/keyboards/dtisaac/dosa40rgb/dosa40rgb.c b/keyboards/dtisaac/dosa40rgb/dosa40rgb.c new file mode 100644 index 0000000000..c46bfc291d --- /dev/null +++ b/keyboards/dtisaac/dosa40rgb/dosa40rgb.c @@ -0,0 +1,39 @@ +/* Copyright 2021 DTIsaac + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "dosa40rgb.h" + +#ifdef RGB_MATRIX_ENABLE +led_config_t g_led_config = { { + //Key Matrix to LED Index + {0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10}, + {22, 21, 20, 19, 18, 17, 16, 15, 14, 13, 12 }, + {23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33}, + {41, 40, 39, NO_LED, 38, NO_LED, 37, 36, 35, 34, 11} +}, { + //LED Index to Physical Positon + { 0, 0}, { 20, 0}, { 40, 0 }, { 61, 0 }, { 81, 0}, { 101, 0}, { 122, 0}, { 142, 0}, { 162, 0}, { 183, 0}, { 203, 0}, { 224, 0}, + {203, 21}, {183, 21}, {162,21 }, {142, 21}, {122,21}, { 101,21}, { 81 ,21}, { 61 ,21}, { 40 ,21}, { 20 ,21}, { 0 ,21}, + { 0, 42}, { 20, 42}, { 40,42 }, { 61, 42}, { 81,42}, { 101,42}, { 122,42}, { 142,42}, { 162,42}, { 183,42}, { 203,42}, + {203, 64}, {183, 64}, {162,64 }, {122, 64}, { 81,64}, { 40, 64}, { 20, 64}, { 0, 64}, +}, { + 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, + 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, + 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, + 1, 1, 1, 1, 1, 1, 1, 1, +} }; + +#endif \ No newline at end of file diff --git a/keyboards/dtisaac/dosa40rgb/dosa40rgb.h b/keyboards/dtisaac/dosa40rgb/dosa40rgb.h new file mode 100644 index 0000000000..261fb7c463 --- /dev/null +++ b/keyboards/dtisaac/dosa40rgb/dosa40rgb.h @@ -0,0 +1,40 @@ +/* Copyright 2021 DTIsaac + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k41, \ + k11, k12, k13, k14, k15, k16, k17, k18, k19, k20, k21, \ + k22, k23, k24, k25, k26, k27, k28, k29, k30, k31, k32, \ + k33, k34, k35, k36, k37, k38, k39, k40 \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10}, \ + {k11, k12, k13, k14, k15, k16, k17, k18, k19, k20, k21}, \ + {k22, k23, k24, k25, k26, k27, k28, k29, k30, k31, k32}, \ + {k33, k34, k35, KC_NO,k36, KC_NO, k37, k38, k39, k40, k41}, \ +} \ No newline at end of file diff --git a/keyboards/dtisaac/dosa40rgb/info.json b/keyboards/dtisaac/dosa40rgb/info.json new file mode 100644 index 0000000000..2feed40d42 --- /dev/null +++ b/keyboards/dtisaac/dosa40rgb/info.json @@ -0,0 +1,53 @@ +{ + "keyboard_name": ">_Dosa40rgb", + "url": "", + "maintainer": "DTIsaac", + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"Q", "x":1, "y":0}, + {"label":"W", "x":2, "y":0}, + {"label":"E", "x":3, "y":0}, + {"label":"R", "x":4, "y":0}, + {"label":"T", "x":5, "y":0}, + {"label":"Y", "x":6, "y":0}, + {"label":"U", "x":7, "y":0}, + {"label":"I", "x":8, "y":0}, + {"label":"O", "x":9, "y":0}, + {"label":"P", "x":10, "y":0}, + {"label":"BSPC", "x":11, "y":0}, + {"label":"Caps Lock", "x":0, "y":1, "w":1.5}, + {"label":"A", "x":1.5, "y":1}, + {"label":"S", "x":2.5, "y":1}, + {"label":"D", "x":3.5, "y":1}, + {"label":"F", "x":4.5, "y":1}, + {"label":"G", "x":5.5, "y":1}, + {"label":"H", "x":6.5, "y":1}, + {"label":"J", "x":7.5, "y":1}, + {"label":"K", "x":8.5, "y":1}, + {"label":"L", "x":9.5, "y":1}, + {"label":"Enter", "x":10.5, "y":1, "w":1.5}, + {"label":"Shift", "x":0, "y":2, "w":1.75}, + {"label":"Z", "x":1.75, "y":2}, + {"label":"X", "x":2.75, "y":2}, + {"label":"C", "x":3.75, "y":2}, + {"label":"V", "x":4.75, "y":2}, + {"label":"B", "x":5.75, "y":2}, + {"label":"N", "x":6.75, "y":2}, + {"label":"M", "x":7.75, "y":2}, + {"label":",", "x":8.75, "y":2}, + {"label":".", "x":9.75, "y":2}, + {"label":"Shift", "x":10.75, "y":2, "w":1.25}, + {"label":"Ctrl", "x":0, "y":3, "w":1.25}, + {"label":"Win", "x":1.25, "y":3, "w":1}, + {"label":"Alt", "x":2.25, "y":3, "w":1.25}, + {"label":"Space", "x":3.5, "y":3, "w":2.25}, + {"label":"Space", "x":5.75, "y":3, "w":2.75}, + {"label":"App", "x":8.5, "y":3, "w":1.25}, + {"label":"Fn", "x":9.75, "y":3, "w":1}, + {"label":"Ctrl", "x":10.75, "y":3, "w":1.25} + ] + } + } +} \ No newline at end of file diff --git a/keyboards/dtisaac/dosa40rgb/keymaps/default/keymap.c b/keyboards/dtisaac/dosa40rgb/keymaps/default/keymap.c new file mode 100644 index 0000000000..c9bde4bb8d --- /dev/null +++ b/keyboards/dtisaac/dosa40rgb/keymaps/default/keymap.c @@ -0,0 +1,122 @@ +/* Copyright 2021 DTIsaac + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H +#include "spi_master.h" +#include "wait.h" + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _L1, + _L2 +}; + +// Defines the keycodes used by our macros in process_record_user +enum custom_keycodes { + BASE, + L1, + BLE_DIS, // Disconnect BLE + LED_EN, // Toggle LED +}; + +#define L1 MO(_L1) +const uint8_t cm1[] = "AT+GAPSTOPADV"; +const uint8_t cm2[] = "AT+GAPDISCONNECT"; +const uint8_t cm3[] = "ATZ"; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [_BASE] = LAYOUT( + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + LT(_L2,KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPACE, KC_SPACE, KC_RALT, L1, KC_RCTL + ), + [_L1] = LAYOUT( + RESET, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_SCLN, KC_QUOT, + KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_SLSH, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [_L2] = LAYOUT( + LED_EN, RGB_RMOD, KC_UP, RGB_MOD, RGB_HUI, RGB_VAI, RGB_SAI, RGB_SPI, KC_TRNS, OUT_USB, OUT_BT, BLE_DIS, + KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, RGB_HUD, RGB_VAD, RGB_SAD, RGB_SPD, KC_TRNS, KC_TRNS, KC_BSLS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TAB, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), +}; + +void rgb_matrix_indicators_user(void) +{ + if (host_keyboard_led_state().caps_lock) + { + rgb_matrix_set_color(22, 200, 200, 200); + } + if (IS_LAYER_ON(_L1)) + { + rgb_matrix_set_color(35, 0, 200, 200); + } + if (IS_LAYER_ON(_L2)) + { + rgb_matrix_set_color(22, 200, 0, 200); + } +} + +void sdep_send(const uint8_t *cmd, uint8_t len) { + + spi_start(AdafruitBleCSPin, false, 0, 2); + uint8_t cnt = 200; + bool ready = false; + + do { + ready = spi_write(0x10) != 0xFE; + if (ready) { + break; + } + spi_stop(); + wait_us(25); + spi_start(AdafruitBleCSPin, false, 0, 2); + } while (cnt--); + + if (ready) { + spi_write(0x00); + spi_write(0x0A); + spi_write(len); + spi_transmit(cmd, len); + } + + spi_stop(); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + + switch (keycode) { + case LED_EN: + if (record->event.pressed) { + DDRB = DDRB ^ 0x20; + PORTB &= ~(1 << 5); + } + return false; + case BLE_DIS: + if (record->event.pressed) { + sdep_send(cm1,sizeof(cm1)); + sdep_send(cm2,sizeof(cm2)); + sdep_send(cm3,sizeof(cm3)); + } + return false; + } + return true; +} \ No newline at end of file diff --git a/keyboards/dtisaac/dosa40rgb/keymaps/default/readme.md b/keyboards/dtisaac/dosa40rgb/keymaps/default/readme.md new file mode 100644 index 0000000000..35494635d8 --- /dev/null +++ b/keyboards/dtisaac/dosa40rgb/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for dosa40rgb diff --git a/keyboards/dtisaac/dosa40rgb/readme.md b/keyboards/dtisaac/dosa40rgb/readme.md new file mode 100644 index 0000000000..189dc7b9bc --- /dev/null +++ b/keyboards/dtisaac/dosa40rgb/readme.md @@ -0,0 +1,25 @@ +# dosa40rgb + +![dosa40rgb](https://i.imgur.com/NfuF82nh.jpg) + +A 40 percent keyboard dosa40rgb Bluetooth Low Energy + +* Keyboard Maintainer: [DTIsaac](https://github.com/daotakisaac) +* Hardware Supported: ATmega32U4 + AdafruitBLE SPI + +Make example for this keyboard (after setting up your build environment): + + make dtisaac/dosa40rgb:default + +Flashing example for this keyboard: + + make dtisaac/dosa40rgb:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 2 ways: + +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available diff --git a/keyboards/dtisaac/dosa40rgb/rules.mk b/keyboards/dtisaac/dosa40rgb/rules.mk new file mode 100644 index 0000000000..0440ff20b4 --- /dev/null +++ b/keyboards/dtisaac/dosa40rgb/rules.mk @@ -0,0 +1,25 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = lufa-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = no # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output +BLUETOOTH = AdafruitBLE # Enable Bluetooth +RGB_MATRIX_ENABLE = yes +RGB_MATRIX_DRIVER = WS2812 \ No newline at end of file diff --git a/keyboards/handwired/dtisaac01/config.h b/keyboards/dtisaac/dtisaac01/config.h similarity index 100% rename from keyboards/handwired/dtisaac01/config.h rename to keyboards/dtisaac/dtisaac01/config.h diff --git a/keyboards/handwired/dtisaac01/dtisaac01.c b/keyboards/dtisaac/dtisaac01/dtisaac01.c similarity index 100% rename from keyboards/handwired/dtisaac01/dtisaac01.c rename to keyboards/dtisaac/dtisaac01/dtisaac01.c diff --git a/keyboards/handwired/dtisaac01/dtisaac01.h b/keyboards/dtisaac/dtisaac01/dtisaac01.h similarity index 100% rename from keyboards/handwired/dtisaac01/dtisaac01.h rename to keyboards/dtisaac/dtisaac01/dtisaac01.h diff --git a/keyboards/handwired/dtisaac01/info.json b/keyboards/dtisaac/dtisaac01/info.json similarity index 100% rename from keyboards/handwired/dtisaac01/info.json rename to keyboards/dtisaac/dtisaac01/info.json diff --git a/keyboards/handwired/dtisaac01/keymaps/default/keymap.c b/keyboards/dtisaac/dtisaac01/keymaps/default/keymap.c similarity index 100% rename from keyboards/handwired/dtisaac01/keymaps/default/keymap.c rename to keyboards/dtisaac/dtisaac01/keymaps/default/keymap.c diff --git a/keyboards/handwired/dtisaac01/keymaps/default/readme.md b/keyboards/dtisaac/dtisaac01/keymaps/default/readme.md similarity index 100% rename from keyboards/handwired/dtisaac01/keymaps/default/readme.md rename to keyboards/dtisaac/dtisaac01/keymaps/default/readme.md diff --git a/keyboards/dtisaac/dtisaac01/keymaps/via/keymap.c b/keyboards/dtisaac/dtisaac01/keymaps/via/keymap.c new file mode 100644 index 0000000000..2f61c803f7 --- /dev/null +++ b/keyboards/dtisaac/dtisaac01/keymaps/via/keymap.c @@ -0,0 +1,59 @@ +/* Copyright 2021 DTIsaac + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layers { + _LAYER0, + _LAYER1, + _LAYER2, + _LAYER3, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_LAYER0] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, LT(1, KC_NO), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [_LAYER1] = LAYOUT( + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_SLEP, KC_WAKE, KC_PWR, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_STEP, BL_ON, BL_INC, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_BRTG, BL_OFF, BL_DEC, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, + _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT + ), + [_LAYER2] = LAYOUT( + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [_LAYER3] = LAYOUT( + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; \ No newline at end of file diff --git a/keyboards/dtisaac/dtisaac01/keymaps/via/readme.md b/keyboards/dtisaac/dtisaac01/keymaps/via/readme.md new file mode 100644 index 0000000000..0407ae2339 --- /dev/null +++ b/keyboards/dtisaac/dtisaac01/keymaps/via/readme.md @@ -0,0 +1 @@ +# The default keymap for dtisaac01 diff --git a/keyboards/dtisaac/dtisaac01/keymaps/via/rules.mk b/keyboards/dtisaac/dtisaac01/keymaps/via/rules.mk new file mode 100644 index 0000000000..036bd6d1c3 --- /dev/null +++ b/keyboards/dtisaac/dtisaac01/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes \ No newline at end of file diff --git a/keyboards/handwired/dtisaac01/readme.md b/keyboards/dtisaac/dtisaac01/readme.md similarity index 100% rename from keyboards/handwired/dtisaac01/readme.md rename to keyboards/dtisaac/dtisaac01/readme.md diff --git a/keyboards/handwired/dtisaac01/rules.mk b/keyboards/dtisaac/dtisaac01/rules.mk similarity index 100% rename from keyboards/handwired/dtisaac01/rules.mk rename to keyboards/dtisaac/dtisaac01/rules.mk From d51bb76ec96c35f3b5494f8dd0ecb2611dccd3df Mon Sep 17 00:00:00 2001 From: Jordan Duabe Date: Sat, 18 Sep 2021 14:52:53 +0800 Subject: [PATCH 024/595] [Keymap] Add 'j4ckofalltrades' keymap for sofle/rev1 (#14446) --- .../sofle/keymaps/j4ckofalltrades/encoder.c | 37 ++++++++ .../sofle/keymaps/j4ckofalltrades/keymap.c | 85 +++++++++++++++++++ .../sofle/keymaps/j4ckofalltrades/oled.c | 76 +++++++++++++++++ .../sofle/keymaps/j4ckofalltrades/readme.md | 19 +++++ .../sofle/keymaps/j4ckofalltrades/rules.mk | 6 ++ 5 files changed, 223 insertions(+) create mode 100644 keyboards/sofle/keymaps/j4ckofalltrades/encoder.c create mode 100644 keyboards/sofle/keymaps/j4ckofalltrades/keymap.c create mode 100644 keyboards/sofle/keymaps/j4ckofalltrades/oled.c create mode 100644 keyboards/sofle/keymaps/j4ckofalltrades/readme.md create mode 100644 keyboards/sofle/keymaps/j4ckofalltrades/rules.mk diff --git a/keyboards/sofle/keymaps/j4ckofalltrades/encoder.c b/keyboards/sofle/keymaps/j4ckofalltrades/encoder.c new file mode 100644 index 0000000000..bd328739ed --- /dev/null +++ b/keyboards/sofle/keymaps/j4ckofalltrades/encoder.c @@ -0,0 +1,37 @@ +/* Copyright 2021 Jordan Duabe + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifdef ENCODER_ENABLE +# include QMK_KEYBOARD_H + +bool encoder_update_user(uint8_t index, bool clockwise) { + if (index == 0) { + if (clockwise) { + tap_code_delay(KC_VOLU, 10); + } else { + tap_code_delay(KC_VOLD, 10); + } + } else if (index == 1) { + if (clockwise) { + tap_code(KC_PGDOWN); + } else { + tap_code(KC_PGUP); + } + } + return true; +} + +#endif diff --git a/keyboards/sofle/keymaps/j4ckofalltrades/keymap.c b/keyboards/sofle/keymaps/j4ckofalltrades/keymap.c new file mode 100644 index 0000000000..e7d03161c3 --- /dev/null +++ b/keyboards/sofle/keymaps/j4ckofalltrades/keymap.c @@ -0,0 +1,85 @@ +/* Copyright 2021 Jordan Duabe + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* + * QWERTY + * ,-----------------------------------------. ,-----------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | ` | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Tab | Q | W | E | R | T | | Y | U | I | O | P | Bspc | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Esc | A | S | D | F | G |-------. ,-------| H | J | K | L | ; | ' | + * |------+------+------+------+------+------| TO(2) | | TO(1) |------+------+------+------+------+------| + * |LShift| Z | X | C | V | B |-------| |-------| N | M | , | . | / |RShift| + * `-----------------------------------------/ / \ \-----------------------------------------' + * | LGUI | LAlt | LCTR |LOWER | /Enter / \Space \ |RAISE | RCTR | RAlt | RGUI | + * | | | | |/ / \ \ | | | | | + * `----------------------------------' '------''---------------------------' + */ + +[0] = LAYOUT( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_GRV, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + MT(MOD_LCTL, KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, TO(2), TO(1), KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LGUI, KC_LALT, KC_LCTRL, MO(2), KC_ENT, KC_SPC, MO(1), KC_RCTRL, KC_RALT, KC_RGUI +), +/* RAISE + * ,-----------------------------------------. ,-----------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | F11 | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Tab | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | F12 | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Esc | ! | @ | # | $ | % |-------. ,-------| ^ | & | * | ( | ) | | | + * |------+------+------+------+------+------| TO(2) | | TO(1) |------+------+------+------+------+------| + * |LShift| = | - | + | { | } |-------| |-------| [ | ] | ; | : | \ | Shift| + * `-----------------------------------------/ / \ \-----------------------------------------' + * | LGUI | LAlt | LCTR |LOWER | /Enter / \Space \ |RAISE | RCTR | RAlt | RGUI | + * | | | | |/ / \ \ | | | | | + * `----------------------------------' '------''---------------------------' + */ +[1] = LAYOUT( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + _______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_F12, + _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_PIPE, + _______, KC_EQL, KC_MINS, KC_PLUS, KC_LCBR, KC_RCBR, _______, _______, KC_LBRC, KC_RBRC, KC_SCLN, KC_COLN, KC_BSLS, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ +), +/* LOWER + * ,----------------------------------------. ,-----------------------------------------. + * | | Pscr | Slck |Pause | | | | | | | | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Tab | Ins | Home | PgUp | | | | | | | | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Esc | Del | End | PgDn | | |-------. ,-------| Left | Down | Up | Right | | | + * |------+------+------+------+------+------| TO(2) | | TO(1) |------+------+------+------+------+------| + * |Shift | Undo | Cut | Copy | Paste| |-------| |-------| | | | | | | + * `-----------------------------------------/ / \ \-----------------------------------------' + * | LGUI | LAlt | LCTR |LOWER | /Enter / \Space \ |RAISE | RCTR | RAlt | RGUI | + * | | | | |/ / \ \ | | | | | + * `----------------------------------' '------''---------------------------' + */ +[2] = LAYOUT( + _______, KC_PSCR, KC_SLCK, KC_PAUSE, _______, _______, _______, _______, _______, _______, _______, _______, + _______, KC_INS, KC_HOME, KC_PGUP, XXXXXXX, XXXXXXX, _______, _______, _______, _______, _______, _______, + _______, KC_DEL, KC_END, KC_PGDN, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, XXXXXXX, XXXXXXX, + _______, KC_UNDO, KC_CUT, KC_COPY, KC_PASTE, XXXXXXX, _______, _______, XXXXXXX, _______, XXXXXXX, _______, XXXXXXX, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ +) +}; diff --git a/keyboards/sofle/keymaps/j4ckofalltrades/oled.c b/keyboards/sofle/keymaps/j4ckofalltrades/oled.c new file mode 100644 index 0000000000..46c791b053 --- /dev/null +++ b/keyboards/sofle/keymaps/j4ckofalltrades/oled.c @@ -0,0 +1,76 @@ +/* Copyright 2021 Jordan Duabe + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifdef OLED_ENABLE +# include QMK_KEYBOARD_H + +static void render_logo(void) { + static const char PROGMEM qmk_logo[] = { + 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, + 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, + 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,0 + }; + + oled_write_P(qmk_logo, false); +} + +static void print_status_narrow(void) { + oled_write_P(PSTR("Sofle"), false); + oled_write_P(PSTR("\n\n\n"), false); + // Print current mode + switch (get_highest_layer(layer_state)) { + case 0: + oled_write_ln_P(PSTR("Qwrt"), false); + break; + default: + oled_write_P(PSTR("Mod\n"), false); + break; + } + oled_write_P(PSTR("\n\n"), false); + // Print current layer + oled_write_ln_P(PSTR("LAYER"), false); + switch (get_highest_layer(layer_state)) { + case 0: + oled_write_P(PSTR("Base\n"), false); + break; + case 1: + oled_write_P(PSTR("Raise"), false); + break; + case 2: + oled_write_P(PSTR("Lower"), false); + break; + default: + oled_write_ln_P(PSTR("Undef"), false); + } + oled_write_P(PSTR("\n\n"), false); +} + +oled_rotation_t oled_init_user(oled_rotation_t rotation) { + if (is_keyboard_master()) { + return OLED_ROTATION_270; + } + return rotation; +} + +void oled_task_user(void) { + if (is_keyboard_master()) { + print_status_narrow(); + } else { + render_logo(); + } +} + +#endif diff --git a/keyboards/sofle/keymaps/j4ckofalltrades/readme.md b/keyboards/sofle/keymaps/j4ckofalltrades/readme.md new file mode 100644 index 0000000000..bb232ef625 --- /dev/null +++ b/keyboards/sofle/keymaps/j4ckofalltrades/readme.md @@ -0,0 +1,19 @@ +![SofleKeyboard custom keymap](https://raw.githubusercontent.com/j4ckofalltrades/keebs/master/sofle/assets/soflekeyboard.png) + +# Via-compatible custom keymap for Sofle + +Modified version of default Via-compatible keymap with focus on adding a standard navigation cluster layer plus some +Vim-inspired features e.g. soft escape (Esc when held, Ctrl when tapped), using 'h', 'j', 'k', 'l' as arrow keys. + +## Layout + +View in [Keyboard Layout Editor](http://www.keyboard-layout-editor.com/#/gists/a1f6519e723ad81ca151741b53a28b80) + +## Features + +- Via support +- Mode for soft escape (`Esc` when tapped, `Ctrl` when held) +- Vim-style navigation (`h` `j` `k` `l` as arrow keys) +- Mode for standard navigation cluster +- Toggling between layers when encoders are pressed +- Left encoder controls `VOLUP`/`VOLDOWN`. Right encoder `PGUP`/`PGDN`. diff --git a/keyboards/sofle/keymaps/j4ckofalltrades/rules.mk b/keyboards/sofle/keymaps/j4ckofalltrades/rules.mk new file mode 100644 index 0000000000..dc95fd5b77 --- /dev/null +++ b/keyboards/sofle/keymaps/j4ckofalltrades/rules.mk @@ -0,0 +1,6 @@ +CONSOLE_ENABLE = no +EXTRAKEY_ENABLE = yes +VIA_ENABLE = yes +LTO_ENABLE = yes + +SRC += oled.c encoder.c From 7c10d00ca6ec07f169d6f5e3c83bd7449a578ac0 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Sat, 18 Sep 2021 00:28:57 -0700 Subject: [PATCH 025/595] Add RGBW support to PWM and SPI drivers for ChibiOS (#14327) * Add RGBW support to PWM and SPI drivers for ChibiOS * Apply suggestions from code review Co-authored-by: Ryan Co-authored-by: Ryan --- platforms/chibios/drivers/ws2812_pwm.c | 38 ++++++++++++++++++++++++-- platforms/chibios/drivers/ws2812_spi.c | 15 ++++++---- 2 files changed, 44 insertions(+), 9 deletions(-) diff --git a/platforms/chibios/drivers/ws2812_pwm.c b/platforms/chibios/drivers/ws2812_pwm.c index 48d81cc876..c17b9cd4e5 100644 --- a/platforms/chibios/drivers/ws2812_pwm.c +++ b/platforms/chibios/drivers/ws2812_pwm.c @@ -5,7 +5,9 @@ /* Adapted from https://github.com/joewa/WS2812-LED-Driver_ChibiOS/ */ #ifdef RGBW -# error "RGBW not supported" +# define WS2812_CHANNELS 4 +#else +# define WS2812_CHANNELS 3 #endif #ifndef WS2812_PWM_DRIVER @@ -68,8 +70,9 @@ * The reset period for each frame is defined in WS2812_TRST_US. * Calculate the number of zeroes to add at the end assuming 1.25 uS/bit: */ +#define WS2812_COLOR_BITS (WS2812_CHANNELS * 8) #define WS2812_RESET_BIT_N (1000 * WS2812_TRST_US / 1250) -#define WS2812_COLOR_BIT_N (RGBLED_NUM * 24) /**< Number of data bits */ +#define WS2812_COLOR_BIT_N (RGBLED_NUM * WS2812_COLOR_BITS) /**< Number of data bits */ #define WS2812_BIT_N (WS2812_COLOR_BIT_N + WS2812_RESET_BIT_N) /**< Total number of bits in a frame */ /** @@ -114,7 +117,7 @@ * * @return The bit index */ -#define WS2812_BIT(led, byte, bit) (24 * (led) + 8 * (byte) + (7 - (bit))) +#define WS2812_BIT(led, byte, bit) (WS2812_COLOR_BITS * (led) + 8 * (byte) + (7 - (bit))) #if (WS2812_BYTE_ORDER == WS2812_BYTE_ORDER_GRB) /** @@ -228,6 +231,20 @@ # define WS2812_BLUE_BIT(led, bit) WS2812_BIT((led), 0, (bit)) #endif +#ifdef RGBW +/** + * @brief Determine the index in @ref ws2812_frame_buffer "the frame buffer" of a given white bit + * + * @note The white byte is the last byte in the color packet + * + * @param[in] led: The led index [0, @ref WS2812_LED_N) + * @param[in] bit: The bit index [0, 7] + * + * @return The bit index + */ +# define WS2812_WHITE_BIT(led, bit) WS2812_BIT((led), 3, (bit)) +#endif + /* --- PRIVATE VARIABLES ---------------------------------------------------- */ static uint32_t ws2812_frame_buffer[WS2812_BIT_N + 1]; /**< Buffer for a frame */ @@ -296,6 +313,17 @@ void ws2812_write_led(uint16_t led_number, uint8_t r, uint8_t g, uint8_t b) { ws2812_frame_buffer[WS2812_BLUE_BIT(led_number, bit)] = ((b >> bit) & 0x01) ? WS2812_DUTYCYCLE_1 : WS2812_DUTYCYCLE_0; } } +void ws2812_write_led_rgbw(uint16_t led_number, uint8_t r, uint8_t g, uint8_t b, uint8_t w) { + // Write color to frame buffer + for (uint8_t bit = 0; bit < 8; bit++) { + ws2812_frame_buffer[WS2812_RED_BIT(led_number, bit)] = ((r >> bit) & 0x01) ? WS2812_DUTYCYCLE_1 : WS2812_DUTYCYCLE_0; + ws2812_frame_buffer[WS2812_GREEN_BIT(led_number, bit)] = ((g >> bit) & 0x01) ? WS2812_DUTYCYCLE_1 : WS2812_DUTYCYCLE_0; + ws2812_frame_buffer[WS2812_BLUE_BIT(led_number, bit)] = ((b >> bit) & 0x01) ? WS2812_DUTYCYCLE_1 : WS2812_DUTYCYCLE_0; +#ifdef RGBW + ws2812_frame_buffer[WS2812_WHITE_BIT(led_number, bit)] = ((w >> bit) & 0x01) ? WS2812_DUTYCYCLE_1 : WS2812_DUTYCYCLE_0; +#endif + } +} // Setleds for standard RGB void ws2812_setleds(LED_TYPE* ledarray, uint16_t leds) { @@ -306,6 +334,10 @@ void ws2812_setleds(LED_TYPE* ledarray, uint16_t leds) { } for (uint16_t i = 0; i < leds; i++) { +#ifdef RGBW + ws2812_write_led_rgbw(i, ledarray[i].r, ledarray[i].g, ledarray[i].b, ledarray[i].w); +#else ws2812_write_led(i, ledarray[i].r, ledarray[i].g, ledarray[i].b); +#endif } } diff --git a/platforms/chibios/drivers/ws2812_spi.c b/platforms/chibios/drivers/ws2812_spi.c index 589bf85c35..62722f466e 100644 --- a/platforms/chibios/drivers/ws2812_spi.c +++ b/platforms/chibios/drivers/ws2812_spi.c @@ -3,10 +3,6 @@ /* Adapted from https://github.com/gamazeps/ws2812b-chibios-SPIDMA/ */ -#ifdef RGBW -# error "RGBW not supported" -#endif - // Define the spi your LEDs are plugged to here #ifndef WS2812_SPI # define WS2812_SPI SPID1 @@ -74,8 +70,12 @@ #endif #define BYTES_FOR_LED_BYTE 4 -#define NB_COLORS 3 -#define BYTES_FOR_LED (BYTES_FOR_LED_BYTE * NB_COLORS) +#ifdef RGBW +# define WS2812_CHANNELS 4 +#else +# define WS2812_CHANNELS 3 +#endif +#define BYTES_FOR_LED (BYTES_FOR_LED_BYTE * WS2812_CHANNELS) #define DATA_SIZE (BYTES_FOR_LED * RGBLED_NUM) #define RESET_SIZE (1000 * WS2812_TRST_US / (2 * 1250)) #define PREAMBLE_SIZE 4 @@ -116,6 +116,9 @@ static void set_led_color_rgb(LED_TYPE color, int pos) { for (int j = 0; j < 4; j++) tx_start[BYTES_FOR_LED * pos + BYTES_FOR_LED_BYTE + j] = get_protocol_eq(color.g, j); for (int j = 0; j < 4; j++) tx_start[BYTES_FOR_LED * pos + BYTES_FOR_LED_BYTE * 2 + j] = get_protocol_eq(color.r, j); #endif +#ifdef RGBW + for (int j = 0; j < 4; j++) tx_start[BYTES_FOR_LED * pos + BYTES_FOR_LED_BYTE * 4 + j] = get_protocol_eq(color.w, j); +#endif } void ws2812_init(void) { From 8130690a286cb9d3ca1f19473ca4bdcb6933e1f6 Mon Sep 17 00:00:00 2001 From: Joakim Tufvegren <104522+firetech@users.noreply.github.com> Date: Sat, 18 Sep 2021 09:29:22 +0200 Subject: [PATCH 026/595] Improvements to handling of disconnected split keyboards. (#14033) * Use memcmp and memcpy to compare and copy slave matrix. ...and memset to initialize `matrix` and `raw_matrix`. Increased my scan rate (while connected) by ~100 (on Ergodox Infinity). Effect on AVR is unknown. Co-authored-by: Stefan Kerkmann * Fix `matrix_post_scan` signalling change on every scan while disconnected. * Undo removal of initialization of `slave_matrix`. This has the effect of increasing my Ergodox Infinity firmware size by 8 bytes instead of decreasing by 8 bytes, and lowers the scan rate while connected back to the initial value before these changes, but _might_ solve some issues on AVR. Co-authored-by: Stefan Kerkmann --- quantum/matrix.c | 28 ++++++++++++---------------- 1 file changed, 12 insertions(+), 16 deletions(-) diff --git a/quantum/matrix.c b/quantum/matrix.c index 33586c431b..4fbcc2419c 100644 --- a/quantum/matrix.c +++ b/quantum/matrix.c @@ -288,10 +288,8 @@ void matrix_init(void) { matrix_init_pins(); // initialize matrix state: all keys off - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - raw_matrix[i] = 0; - matrix[i] = 0; - } + memset(matrix, 0, sizeof(matrix)); + memset(raw_matrix, 0, sizeof(raw_matrix)); debounce_init(ROWS_PER_HAND); @@ -312,24 +310,22 @@ __attribute__((weak)) bool transport_master_if_connected(matrix_row_t master_mat bool matrix_post_scan(void) { bool changed = false; if (is_keyboard_master()) { + static bool last_connected = false; matrix_row_t slave_matrix[ROWS_PER_HAND] = {0}; if (transport_master_if_connected(matrix + thisHand, slave_matrix)) { - for (int i = 0; i < ROWS_PER_HAND; ++i) { - if (matrix[thatHand + i] != slave_matrix[i]) { - matrix[thatHand + i] = slave_matrix[i]; - changed = true; - } - } - } else { - // reset other half if disconnected - for (int i = 0; i < ROWS_PER_HAND; ++i) { - matrix[thatHand + i] = 0; - slave_matrix[i] = 0; - } + changed = memcmp(matrix + thatHand, slave_matrix, sizeof(slave_matrix)) != 0; + last_connected = true; + } else if (last_connected) { + // reset other half when disconnected + memset(slave_matrix, 0, sizeof(slave_matrix)); changed = true; + + last_connected = false; } + if (changed) memcpy(matrix + thatHand, slave_matrix, sizeof(slave_matrix)); + matrix_scan_quantum(); } else { transport_slave(matrix + thatHand, matrix + thisHand); From c681c1a6a84a378ecc6c04174aafadd5f3d1b31f Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Sat, 18 Sep 2021 00:53:16 -0700 Subject: [PATCH 027/595] [Keyboard] Fix dosa40rgb compilation issues (#14491) --- keyboards/dtisaac/dosa40rgb/dosa40rgb.h | 2 +- keyboards/dtisaac/dosa40rgb/rules.mk | 4 +++- 2 files changed, 4 insertions(+), 2 deletions(-) diff --git a/keyboards/dtisaac/dosa40rgb/dosa40rgb.h b/keyboards/dtisaac/dosa40rgb/dosa40rgb.h index 261fb7c463..659e42f8f2 100644 --- a/keyboards/dtisaac/dosa40rgb/dosa40rgb.h +++ b/keyboards/dtisaac/dosa40rgb/dosa40rgb.h @@ -37,4 +37,4 @@ {k11, k12, k13, k14, k15, k16, k17, k18, k19, k20, k21}, \ {k22, k23, k24, k25, k26, k27, k28, k29, k30, k31, k32}, \ {k33, k34, k35, KC_NO,k36, KC_NO, k37, k38, k39, k40, k41}, \ -} \ No newline at end of file +} diff --git a/keyboards/dtisaac/dosa40rgb/rules.mk b/keyboards/dtisaac/dosa40rgb/rules.mk index 0440ff20b4..c3ad783fc9 100644 --- a/keyboards/dtisaac/dosa40rgb/rules.mk +++ b/keyboards/dtisaac/dosa40rgb/rules.mk @@ -22,4 +22,6 @@ BLUETOOTH_ENABLE = no # Enable Bluetooth AUDIO_ENABLE = no # Audio output BLUETOOTH = AdafruitBLE # Enable Bluetooth RGB_MATRIX_ENABLE = yes -RGB_MATRIX_DRIVER = WS2812 \ No newline at end of file +RGB_MATRIX_DRIVER = WS2812 + +LTO_ENABLE = yes From 2c4660e40d7897c60e7f0718f25f866e33137334 Mon Sep 17 00:00:00 2001 From: Lui Wolff <62627597+lmlask@users.noreply.github.com> Date: Sat, 18 Sep 2021 16:06:46 +0000 Subject: [PATCH 028/595] [Keymap] Added Brazilian keymap for BM40RGB (#14431) --- .../bm40hsrgb/keymaps/wolff_abnt2/keymap.c | 164 ++++++++++++++++++ .../bm40hsrgb/keymaps/wolff_abnt2/readme.md | 35 ++++ 2 files changed, 199 insertions(+) create mode 100644 keyboards/kprepublic/bm40hsrgb/keymaps/wolff_abnt2/keymap.c create mode 100644 keyboards/kprepublic/bm40hsrgb/keymaps/wolff_abnt2/readme.md diff --git a/keyboards/kprepublic/bm40hsrgb/keymaps/wolff_abnt2/keymap.c b/keyboards/kprepublic/bm40hsrgb/keymaps/wolff_abnt2/keymap.c new file mode 100644 index 0000000000..daffb61e76 --- /dev/null +++ b/keyboards/kprepublic/bm40hsrgb/keymaps/wolff_abnt2/keymap.c @@ -0,0 +1,164 @@ +/* Copyright 2021 lmlmask + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H +#include "keymap_br_abnt2.h" + +enum layers { + _WORKMAN, + _QWERTY, + _DVORAK, + _COLEMAK, + _SYM, + _FUNCTION, + _MIDI, + _NAV, + _NUM, + _ADJUST + +}; + +enum planck_keycodes { + WORKMAN = SAFE_RANGE, + QWERTY, + DVORAK, + COLEMAK, + MIDI +}; + +#define SYM MO(_SYM) +#define FUN LT(_FUNCTION, KC_ENT) +#define MYTAB LT(_NAV, KC_TAB) +#define MYNAV LT(_NAV, KC_DEL) +#define MYNUM LT(_NUM, KC_BSPC) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +//qwerty base layer ok +[_QWERTY] = LAYOUT_planck_mit( + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, BR_TILD, + MYTAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, BR_CCED, BR_ACUT, + KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, BR_SLSH, KC_RSPC, + KC_LCTL, KC_LALT, KC_LGUI, SYM, MYNAV, KC_SPC, MYNUM, FUN, KC_RGUI, KC_LALT, RCTL_T(KC_ENT) +), + +//workman base layer ok +[_WORKMAN] = LAYOUT_planck_mit( + KC_ESC, KC_Q, KC_D, KC_R, KC_W, KC_B, KC_J, KC_F, KC_U, KC_P, BR_CCED, BR_TILD, + MYTAB, KC_A, KC_S, KC_H, KC_T, KC_G, KC_Y, KC_N, KC_E, KC_O, KC_I, BR_ACUT, + KC_LSPO, KC_Z, KC_X, KC_M, KC_C, KC_V, KC_K, KC_L, KC_COMM, KC_DOT, BR_SLSH, KC_RSPC, + KC_LCTL, KC_LALT, KC_LGUI, SYM, MYNAV, KC_SPC, MYNUM, FUN, KC_RGUI, KC_LALT, RCTL_T(KC_ENT) +), + +//dvorak base layer ok +[_DVORAK] = LAYOUT_planck_mit( + KC_ESC, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, BR_SLSH, BR_TILD, + MYTAB, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, BR_ACUT, + KC_LSPO, BR_CCED, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSPC, + KC_LCTL, KC_LALT, KC_LGUI, SYM, MYNAV, KC_SPC, MYNUM, FUN, KC_RGUI, KC_LALT, RCTL_T(KC_ENT) +), + +//colemak base layer ok +[_COLEMAK] = LAYOUT_planck_mit( + KC_ESC, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, BR_CCED, BR_TILD, + MYTAB, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, BR_ACUT, + KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, BR_SLSH, KC_RSPC, + KC_LCTL, KC_LALT, KC_LGUI, SYM, MYNAV, KC_SPC, MYNUM, FUN, KC_RGUI, KC_LALT, RCTL_T(KC_ENT) +), + +//navigation and utility layer ok +[_NAV] = LAYOUT_planck_mit( + KC_TRNS, _______, _______, _______, _______, _______, _______, KC_HOME, KC_UP, KC_END, KC_PGUP, KC_VOLU, + _______, _______, _______, _______, BR_QUOT, _______, KC_ENT, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, KC_VOLD, + KC_TRNS, KC_UNDO, KC_CUT, KC_COPY, KC_PSTE, _______, _______, KC_BSPC, KC_DEL, _______, _______, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, _______, _______, _______, MYNUM, _______, KC_MPRV, KC_MPLY, KC_MNXT +), + +//symbols layer ok +[_SYM] = LAYOUT_planck_mit( + BR_DQUO, BR_EXLM, BR_AT, BR_HASH, BR_DLR, BR_PERC, BR_DIAE, BR_AMPR, BR_ASTR, BR_LPRN, BR_RPRN, BR_COLN, + BR_QUOT, BR_PIPE, _______, _______, _______, _______, _______, BR_PLUS, BR_UNDS, BR_LBRC, BR_RBRC, BR_SCLN, + KC_TRNS, BR_BSLS, _______, _______, _______, _______, _______, BR_EQL, BR_MINS, BR_LCBR, BR_RCBR, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, _______, _______, _______, _______, _______, KC_TRNS, KC_TRNS, KC_TRNS +), + +//numbers layer ok +[_NUM] = LAYOUT_planck_mit( + KC_TRNS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, BR_MINS, + _______, BR_ASTR, BR_SLSH, BR_MINS, BR_PLUS, _______, _______, KC_4, KC_5, KC_6, BR_COMM, BR_PLUS, + KC_TRNS, BR_PERC, BR_EQL, BR_DOT, BR_COMM, _______, _______, KC_1, KC_2, KC_3, BR_DOT, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, _______, MYNAV, _______, _______, KC_0, KC_0, KC_COMM, KC_ENT +), + +//FN layer +[_FUNCTION] = LAYOUT_planck_mit( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, _______, _______, KC_F13, KC_F14, KC_F15, KC_F16, KC_INS, + KC_PSCR, KC_F5, KC_F6, KC_F7, KC_F8, _______, _______, KC_F17, KC_F18, KC_F19, KC_F20, KC_PAUS, + KC_TRNS, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, KC_F21, KC_F22, KC_F23, KC_F24, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, _______, _______, _______, _______, _______, KC_TRNS, KC_TRNS, KC_TRNS +), + +// adjust layer ok +[_ADJUST] = LAYOUT_planck_mit( + RESET, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI, _______, _______, _______, _______, _______, _______, + KC_CAPS, RGB_RMOD,RGB_HUD, RGB_SAD, RGB_VAD, RGB_SPD, _______, QWERTY, DVORAK, COLEMAK, WORKMAN, MIDI, + _______, MI_ON, MI_OFF, MI_TOG, MU_ON, MU_OFF, MU_TOG, MU_MOD, AU_ON, AU_OFF, _______, _______, + RGB_TOG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ +), + +// midi layer +[_MIDI] = LAYOUT_planck_mit( + MI_Cs, MI_Ds, _______, MI_Fs, MI_Gs, MI_As, _______, MI_Cs, MI_Ds, _______, MI_Fs, MI_Gs, + MI_C, MI_D, MI_E, MI_F, MI_G, MI_A, MI_B, MI_C, MI_D, MI_E, MI_F, MI_G, + MI_BENDU,MI_OCTU, MI_TRNSU,MI_VELU, _______, _______, _______, _______, _______, MI_ON, MI_CHU, MI_TOG, + MI_BENDD,MI_OCTD, MI_TRNSD,MI_VELD, MYNAV, MI_SUS, MYNUM, _______, MI_OFF, MI_CHD, MI_ALLOFF +) +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + set_single_persistent_default_layer(_QWERTY); + } + return false; + case WORKMAN: + if (record->event.pressed) { + set_single_persistent_default_layer(_WORKMAN); + } + return false; + case DVORAK: + if (record->event.pressed) { + set_single_persistent_default_layer(_DVORAK); + } + return false; + case COLEMAK: + if (record->event.pressed) { + set_single_persistent_default_layer(_COLEMAK); + } + return false; + case MIDI: + if (record->event.pressed) { + set_single_persistent_default_layer(_MIDI); + } + return false; + } + return true; +} + +layer_state_t layer_state_set_user(layer_state_t state) { + return update_tri_layer_state(state, _NAV, _NUM, _ADJUST); +} diff --git a/keyboards/kprepublic/bm40hsrgb/keymaps/wolff_abnt2/readme.md b/keyboards/kprepublic/bm40hsrgb/keymaps/wolff_abnt2/readme.md new file mode 100644 index 0000000000..b647e1e418 --- /dev/null +++ b/keyboards/kprepublic/bm40hsrgb/keymaps/wolff_abnt2/readme.md @@ -0,0 +1,35 @@ +# Brazilian keymap for the BM40RGB keyboard + +![qwerty](https://user-images.githubusercontent.com/62627597/133505514-466192cf-c58f-4b6f-9b7c-53ec36078401.png) + +This keymap deviates somewhat from the generally used conventions of Planck style keyboards. +It's built on the following principles: + +1. Availability of different base layers. QWERTY, Dvorak, Colemak and Workman are available. They can be chosen with the four right hand home row keys on the ADJUST layer (NAV + NUM keys). The base layout you choose gets stored on the keyboard EEPROM, so it will still be set if you unplug or reset the keyboard. I use Workman, so it's the default, but you can change to QWERTY easily with NAV + NUM + J (the J in QWERTY). +2. Frequent use of navigation keys such as the arrow keys, home, end, and hotkeys using those keycodes. For that reason, it keeps the navigation keys on a dedicated nav layer, on the home row, under the right hand. The nav layer gets the highly accessible layer toggle button usually used for the LOWER layer on most Planck style keymaps. I find this much better than using dedicated arrow keys on the bottom right of the keyboard, as the very reason I swapped to a 40% is to move my hands less. +3. Accessibility of the ´ ` ^ ~ ç symbols. There are several blank spaces left on the symbols layer, if you need access to other symbols or diacritics. +4. Proper touch typing, and hotkey access, with the Ctrl, Shift, Win/Super and Alt modifiers on both sides. I found my hands very much expect Ctrl to be on the edge of the keyboard, and as such I've kept both bottom corner keys as Ctrl. Using those keys as layer modifiers, albeit common in many keymaps, is something I found to be somewhat awkward, as it makes it basically impossible to use the hand used to press them. +5. Numbers and navigation keys should be slightly more accessible than symbols and function keys. If you use symbols more often, consider swapping the NUM and SYM layer toggle keys. +6. It's easier to remember layers when they make sense conceptually. Hence, there are dedicated layers for navigation/utility (NAV), numbers (NUM), symbols (SYM) and function keys (FN). There's a dedicated MIDI layer. Don't forget to add #define MIDI_ADVANCED to your config.h if you plan on using it. +7. Tap hold is a good tool and you should use it if you can. Backspace and Delete are set as tap functions on the two more accessible layer toggle keys. + +It will only work as intended if your system keyboard layout is set to Brazilian ABNT2. It may work with other international layouts, but some keys, including brackets and the ´ ` ~ ^ keys, will get broken. + +# Layers and functions + +In each key: +Top left: Symbols; +Top right: Functions; +Bottom left: Navigation; +Bottom right: Numbers; +Bottom: secondary function (tap/hold) + +# BASE (Qwerty, Dvorak, Colemak, Workman) +![qwerty](https://user-images.githubusercontent.com/62627597/133505788-e8410162-8491-4f52-bc94-62dacb752171.png) + +# Adjust (NAV+NUM) +![adjust](https://user-images.githubusercontent.com/62627597/133182475-1994e733-71a2-42ee-88fe-9a15e711b938.png) + +# MIDI +![midi](https://user-images.githubusercontent.com/62627597/133505599-8ae3ea32-5f8f-451f-b191-f74c514d22c0.png) + From 4e7133e262acf185fd4dc77a0cfad0083a88fae6 Mon Sep 17 00:00:00 2001 From: Elliot Powell <32494740+e11i0t23@users.noreply.github.com> Date: Sat, 18 Sep 2021 19:39:58 +0100 Subject: [PATCH 029/595] [Keyboard] Add support for Coarse60 (#14416) Co-authored-by: Joel Challis Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- keyboards/keebsforall/coarse60/chconf.h | 31 ++++ keyboards/keebsforall/coarse60/coarse60.c | 29 ++++ keyboards/keebsforall/coarse60/coarse60.h | 50 ++++++ keyboards/keebsforall/coarse60/config.h | 103 ++++++++++++ keyboards/keebsforall/coarse60/halconf.h | 33 ++++ keyboards/keebsforall/coarse60/info.json | 154 ++++++++++++++++++ .../coarse60/keymaps/default/keymap.c | 37 +++++ .../keebsforall/coarse60/keymaps/via/keymap.c | 52 ++++++ .../keebsforall/coarse60/keymaps/via/rules.mk | 1 + keyboards/keebsforall/coarse60/mcuconf.h | 36 ++++ keyboards/keebsforall/coarse60/readme.md | 22 +++ keyboards/keebsforall/coarse60/rules.mk | 29 ++++ 12 files changed, 577 insertions(+) create mode 100644 keyboards/keebsforall/coarse60/chconf.h create mode 100644 keyboards/keebsforall/coarse60/coarse60.c create mode 100644 keyboards/keebsforall/coarse60/coarse60.h create mode 100644 keyboards/keebsforall/coarse60/config.h create mode 100644 keyboards/keebsforall/coarse60/halconf.h create mode 100644 keyboards/keebsforall/coarse60/info.json create mode 100644 keyboards/keebsforall/coarse60/keymaps/default/keymap.c create mode 100644 keyboards/keebsforall/coarse60/keymaps/via/keymap.c create mode 100644 keyboards/keebsforall/coarse60/keymaps/via/rules.mk create mode 100644 keyboards/keebsforall/coarse60/mcuconf.h create mode 100644 keyboards/keebsforall/coarse60/readme.md create mode 100644 keyboards/keebsforall/coarse60/rules.mk diff --git a/keyboards/keebsforall/coarse60/chconf.h b/keyboards/keebsforall/coarse60/chconf.h new file mode 100644 index 0000000000..2dfe6f0be0 --- /dev/null +++ b/keyboards/keebsforall/coarse60/chconf.h @@ -0,0 +1,31 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +/* + * This file was auto-generated by: + * `qmk chibios-confmigrate -i keyboards/projectkb/alice/chconf.h -r platforms/chibios/common/configs/chconf.h` + */ + +#pragma once + +#define CH_CFG_ST_FREQUENCY 10000 + +#define CH_CFG_OPTIMIZE_SPEED FALSE + +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE + +#include_next + diff --git a/keyboards/keebsforall/coarse60/coarse60.c b/keyboards/keebsforall/coarse60/coarse60.c new file mode 100644 index 0000000000..8287eec1a8 --- /dev/null +++ b/keyboards/keebsforall/coarse60/coarse60.c @@ -0,0 +1,29 @@ +/* +Copyright 2021 Elliot Powell + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include "coarse60.h" + +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + if (index == 0) { + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } + return true; +} diff --git a/keyboards/keebsforall/coarse60/coarse60.h b/keyboards/keebsforall/coarse60/coarse60.h new file mode 100644 index 0000000000..76f147cf12 --- /dev/null +++ b/keyboards/keebsforall/coarse60/coarse60.h @@ -0,0 +1,50 @@ +/* +Copyright 2021 Elliot Powell + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#pragma once + +#include "quantum.h" + +#define KNO KC_NO +#define LAYOUT_default LAYOUT_alice_split_bs + +#define LAYOUT_alice_split_bs( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K2D,\ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2E, \ + K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K41, K44, K45, K46, K48, K4A, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E }, \ + { KNO, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { KNO, K41, KNO, KNO, K44, K45, K46, KNO, K48, KNO, K4A, KNO, KNO, KNO, K4E } \ +} + +#define LAYOUT_alice( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2E, \ + K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K41, K44, K45, K46, K48, K4A, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, KNO, K2E }, \ + { KNO, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { KNO, K41, KNO, KNO, K44, K45, K46, KNO, K48, KNO, K4A, KNO, KNO, KNO, K4E } \ +} diff --git a/keyboards/keebsforall/coarse60/config.h b/keyboards/keebsforall/coarse60/config.h new file mode 100644 index 0000000000..ee37802145 --- /dev/null +++ b/keyboards/keebsforall/coarse60/config.h @@ -0,0 +1,103 @@ +/* +Copyright 2021 Elliot Powell + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#pragma once + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x6B66 +#define PRODUCT_ID 0x5341 +#define DEVICE_VER 0x0001 +#define MANUFACTURER KeebsforAll +#define PRODUCT coarse60 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +#define MATRIX_COL_PINS { B1, B0, A7, B14, A5, A4, A3, B9, B8, B7, B6, B5, B4, B3, A15 } +#define MATRIX_ROW_PINS { A9, A10, B12, A2, C13 } +#define DIODE_DIRECTION COL2ROW + +#define BACKLIGHT_PIN A6 +#define BACKLIGHT_PWM_DRIVER PWMD3 +#define BACKLIGHT_PWM_CHANNEL 1 +#define BACKLIGHT_PAL_MODE 1 +#define BACKLIGHT_LEVELS 6 +#define BACKLIGHT_BREATHING +#define BREATHING_PERIOD 6 + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +#define RGB_DI_PIN B15 +#define RGBLED_NUM 14 +#define WS2812_SPI SPID2 +#define WS2812_SPI_MOSI_PAL_MODE 0 +#define WS2812_SPI_SCK_PAL_MODE 0 +#define WS2812_SPI_SCK_PIN B13 + +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE + + +#define LED_NUM_LOCK_PIN B2 +#define LED_CAPS_LOCK_PIN B10 +#define LED_SCROLL_LOCK_PIN B11 +#define LED_PIN_ON_STATE 0 + +#define ENCODERS_PAD_A { A8 } +#define ENCODERS_PAD_B { A1 } +#define ENCODER_RESOLUTION 2 + +// 2 bits for 4 layout options +#define VIA_EEPROM_LAYOUT_OPTIONS_SIZE 2 + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + + +#define SLEEP_LED_GPT_DRIVER GPTD1 diff --git a/keyboards/keebsforall/coarse60/halconf.h b/keyboards/keebsforall/coarse60/halconf.h new file mode 100644 index 0000000000..0016e53ba8 --- /dev/null +++ b/keyboards/keebsforall/coarse60/halconf.h @@ -0,0 +1,33 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +/* + * This file was auto-generated by: + * `qmk chibios-confmigrate -i keyboards/projectkb/alice/halconf.h -r platforms/chibios/common/configs/halconf.h` + */ + +#pragma once + +#define HAL_USE_I2C TRUE + +#define HAL_USE_PWM TRUE + +#define HAL_USE_SPI TRUE + +#define HAL_USE_GPT TRUE + +#include_next + diff --git a/keyboards/keebsforall/coarse60/info.json b/keyboards/keebsforall/coarse60/info.json new file mode 100644 index 0000000000..8718b79f44 --- /dev/null +++ b/keyboards/keebsforall/coarse60/info.json @@ -0,0 +1,154 @@ +{ + "keyboard_name": "coarse60", + "url":"https://keebsforall.com", + "maintainer": "keebsforall", + "layouts": { + "LAYOUT_alice_split_bs": { + "layout": [ + {"label":"Esc", "x":0.5, "y":0}, + {"label":"`", "x":1.75, "y":0.25}, + {"label":"1", "x":2.75, "y":0.25}, + {"label":"2", "x":3.75, "y":0}, + {"label":"3", "x":4.75, "y":0.25}, + {"label":"4", "x":5.75, "y":0.25}, + {"label":"5", "x":6.75, "y":0.25}, + {"label":"6", "x":7.75, "y":0.25}, + {"label":"7", "x":11, "y":0.25}, + {"label":"8", "x":12, "y":0.25}, + {"label":"9", "x":13, "y":0.25}, + {"label":"0", "x":14, "y":0.25}, + {"label":"-", "x":15, "y":0}, + {"label":"=", "x":16, "y":0.25}, + {"label":"Del", "x":17, "y":0.25}, + {"label":"Backspace", "x":18, "y":0.25}, + + {"label":"PgUp", "x":0.25, "y":1}, + {"label":"Tab", "x":1.5, "y":1.25, "w":1.5}, + {"label":"Q", "x":3, "y":1.25}, + {"label":"W", "x":4.25, "y":1.25}, + {"label":"E", "x":5.25, "y":1.25}, + {"label":"R", "x":6.25, "y":1.25}, + {"label":"T", "x":7.25, "y":1.25}, + {"label":"Y", "x":10.5, "y":1.25}, + {"label":"U", "x":11.5, "y":1.25}, + {"label":"I", "x":12.5, "y":1.25}, + {"label":"O", "x":13.5, "y":1.25}, + {"label":"P", "x":14.75, "y":1.25}, + {"label":"{", "x":15.75, "y":1.25}, + {"label":"}", "x":16.75, "y":1.25}, + {"label":"|", "x":17.75, "y":1.25, "w":1.5}, + + {"label":"PgDn", "x":0, "y":2}, + {"label":"Caps Lock", "x":1.5, "y":2.25, "w":1.75}, + {"label":"A", "x":3.25, "y":2.25}, + {"label":"S", "x":4.5, "y":2.25}, + {"label":"D", "x":5.5, "y":2.25}, + {"label":"F", "x":6.5, "y":2.25}, + {"label":"G", "x":7.5, "y":2.25}, + {"label":"H", "x":10.75, "y":2.25}, + {"label":"J", "x":11.75, "y":2.25}, + {"label":"K", "x":12.75, "y":2.25}, + {"label":"L", "x":13.75, "y":2.25}, + {"label":":", "x":15.25, "y":2.25}, + {"label":"\"", "x":16.25, "y":2.25}, + {"label":"Enter", "x":17.25, "y":2.25, "w":2.25}, + + {"label":"Shift", "x":1.5, "y":3.25, "w":2.25}, + {"label":"Z", "x":3.75, "y":3.25}, + {"label":"X", "x":5, "y":3.25}, + {"label":"C", "x":6, "y":3.25}, + {"label":"V", "x":7, "y":3.25}, + {"label":"B", "x":8, "y":3.25}, + {"label":"Fn", "x":10.25, "y":3.25}, + {"label":"N", "x":11.25, "y":3.25}, + {"label":"M", "x":12.25, "y":3.25}, + {"label":"<", "x":13.25, "y":3.25}, + {"label":">", "x":15, "y":3.25}, + {"label":"?", "x":16, "y":3.25}, + {"label":"Shift", "x":17, "y":3.25, "w":1.75}, + {"label":"Fn", "x":18.75, "y":3.25}, + + {"label":"Ctrl", "x":1.5, "y":4.25, "w":1.5}, + {"label":"Alt", "x":5, "y":4.25, "w":1.5}, + {"label":"Space", "x":6.5, "y":4.25, "w":2}, + {"label":"Menu", "x":8.5, "y":4.25}, + {"label":"Space", "x":10.25, "y":4.25, "w":2.75}, + {"label":"Alt", "x":13, "y":4.25, "w":1.5}, + {"label":"Ctrl", "x":18, "y":4.25, "w":1.5} + ] + }, + "LAYOUT_alice": { + "layout": [ + {"label":"Esc", "x":0.5, "y":0}, + {"label":"`", "x":1.75, "y":0.25}, + {"label":"1", "x":2.75, "y":0.25}, + {"label":"2", "x":3.75, "y":0}, + {"label":"3", "x":4.75, "y":0.25}, + {"label":"4", "x":5.75, "y":0.25}, + {"label":"5", "x":6.75, "y":0.25}, + {"label":"6", "x":7.75, "y":0.25}, + {"label":"7", "x":11, "y":0.25}, + {"label":"8", "x":12, "y":0.25}, + {"label":"9", "x":13, "y":0.25}, + {"label":"0", "x":14, "y":0.25}, + {"label":"-", "x":15, "y":0}, + {"label":"=", "x":16, "y":0.25}, + {"label":"Backspace", "x":17, "y":0.25, "w":2}, + + {"label":"PgUp", "x":0.25, "y":1}, + {"label":"Tab", "x":1.5, "y":1.25, "w":1.5}, + {"label":"Q", "x":3, "y":1.25}, + {"label":"W", "x":4.25, "y":1.25}, + {"label":"E", "x":5.25, "y":1.25}, + {"label":"R", "x":6.25, "y":1.25}, + {"label":"T", "x":7.25, "y":1.25}, + {"label":"Y", "x":10.5, "y":1.25}, + {"label":"U", "x":11.5, "y":1.25}, + {"label":"I", "x":12.5, "y":1.25}, + {"label":"O", "x":13.5, "y":1.25}, + {"label":"P", "x":14.75, "y":1.25}, + {"label":"{", "x":15.75, "y":1.25}, + {"label":"}", "x":16.75, "y":1.25}, + {"label":"|", "x":17.75, "y":1.25, "w":1.5}, + + {"label":"PgDn", "x":0, "y":2}, + {"label":"Caps Lock", "x":1.5, "y":2.25, "w":1.75}, + {"label":"A", "x":3.25, "y":2.25}, + {"label":"S", "x":4.5, "y":2.25}, + {"label":"D", "x":5.5, "y":2.25}, + {"label":"F", "x":6.5, "y":2.25}, + {"label":"G", "x":7.5, "y":2.25}, + {"label":"H", "x":10.75, "y":2.25}, + {"label":"J", "x":11.75, "y":2.25}, + {"label":"K", "x":12.75, "y":2.25}, + {"label":"L", "x":13.75, "y":2.25}, + {"label":":", "x":15.25, "y":2.25}, + {"label":"\"", "x":16.25, "y":2.25}, + {"label":"Enter", "x":17.25, "y":2.25, "w":2.25}, + + {"label":"Shift", "x":1.5, "y":3.25, "w":2.25}, + {"label":"Z", "x":3.75, "y":3.25}, + {"label":"X", "x":5, "y":3.25}, + {"label":"C", "x":6, "y":3.25}, + {"label":"V", "x":7, "y":3.25}, + {"label":"B", "x":8, "y":3.25}, + {"label":"Fn", "x":10.25, "y":3.25}, + {"label":"N", "x":11.25, "y":3.25}, + {"label":"M", "x":12.25, "y":3.25}, + {"label":"<", "x":13.25, "y":3.25}, + {"label":">", "x":15, "y":3.25}, + {"label":"?", "x":16, "y":3.25}, + {"label":"Shift", "x":17, "y":3.25, "w":1.75}, + {"label":"Fn", "x":18.75, "y":3.25}, + + {"label":"Ctrl", "x":1.5, "y":4.25, "w":1.5}, + {"label":"Alt", "x":5, "y":4.25, "w":1.5}, + {"label":"Space", "x":6.5, "y":4.25, "w":2}, + {"label":"Menu", "x":8.5, "y":4.25}, + {"label":"Space", "x":10.25, "y":4.25, "w":2.75}, + {"label":"Alt", "x":13, "y":4.25, "w":1.5}, + {"label":"Ctrl", "x":18, "y":4.25, "w":1.5} + ] + } + } +} diff --git a/keyboards/keebsforall/coarse60/keymaps/default/keymap.c b/keyboards/keebsforall/coarse60/keymaps/default/keymap.c new file mode 100644 index 0000000000..7027850582 --- /dev/null +++ b/keyboards/keebsforall/coarse60/keymaps/default/keymap.c @@ -0,0 +1,37 @@ +/* +Copyright 2021 Elliot Powell + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_alice_split_bs( + KC_ESC, KC_TILD, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_DEL, KC_BSPC, + KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_PGDN, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RGUI, + KC_LCTL, KC_LALT, KC_SPC, MO(1), KC_SPC, KC_RALT, KC_RCTL + ), + + [1] = LAYOUT_alice_split_bs( + RGB_TOG, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, + RGB_MOD, _______, _______, KC_UP, _______, _______, _______, RGB_SAI, RGB_HUI, RGB_VAI, _______, _______, _______, _______, _______, + RGB_RMOD, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, RGB_SAD, RGB_HUD, RGB_VAD, _______, _______, _______, _______, + _______, BL_INC, BL_DEC, BL_TOGG, BL_BRTG, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, RESET + ) +}; diff --git a/keyboards/keebsforall/coarse60/keymaps/via/keymap.c b/keyboards/keebsforall/coarse60/keymaps/via/keymap.c new file mode 100644 index 0000000000..6139c43d73 --- /dev/null +++ b/keyboards/keebsforall/coarse60/keymaps/via/keymap.c @@ -0,0 +1,52 @@ +/* +Copyright 2021 Elliot Powell + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include QMK_KEYBOARD_H + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_alice_split_bs( + KC_ESC, KC_TILD, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_DEL, KC_BSPC, + KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_PGDN, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RGUI, + KC_LCTL, KC_LALT, KC_SPC, MO(1), KC_SPC, KC_RALT, KC_RCTL + ), + + [1] = LAYOUT_alice_split_bs( + RGB_TOG, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, + RGB_MOD, _______, _______, KC_UP, _______, _______, _______, RGB_SAI, RGB_HUI, RGB_VAI, _______, _______, _______, _______, _______, + RGB_RMOD, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, RGB_SAD, RGB_HUD, RGB_VAD, _______, _______, _______, _______, + _______, BL_INC, BL_DEC, BL_TOGG, BL_BRTG, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, RESET + ), + + [2] = LAYOUT_alice_split_bs( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______ + ), + + [3] = LAYOUT_alice_split_bs( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______ + ), +}; diff --git a/keyboards/keebsforall/coarse60/keymaps/via/rules.mk b/keyboards/keebsforall/coarse60/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/keebsforall/coarse60/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/keebsforall/coarse60/mcuconf.h b/keyboards/keebsforall/coarse60/mcuconf.h new file mode 100644 index 0000000000..6e0f1a50d8 --- /dev/null +++ b/keyboards/keebsforall/coarse60/mcuconf.h @@ -0,0 +1,36 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +/* + * This file was auto-generated by: + * `qmk chibios-confmigrate -i keyboards/projectkb/alice/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + */ + +#pragma once + +#include_next + +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE + +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE + +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 TRUE + +#undef STM32_GPT_USE_TIM1 +#define STM32_GPT_USE_TIM1 TRUE diff --git a/keyboards/keebsforall/coarse60/readme.md b/keyboards/keebsforall/coarse60/readme.md new file mode 100644 index 0000000000..cde6152499 --- /dev/null +++ b/keyboards/keebsforall/coarse60/readme.md @@ -0,0 +1,22 @@ +# Coarse60 +### seh0nky x KeebsForAll + +A beginner-friendly aluminum alice inspired keyboard. The Coarse60 aims to provide a seamless aluminum keyboard with premium features for an affordable price. + +![coarse60](https://i.imgur.com/L6dw2xKh.jpg) + +* Hardware Supported: seh0nky x KeebsForAll Coarse60 +* Keyboard Maintainer: [e11i0t23](https://github.com/e11i0t23) +* Keyboard Availabilty: [keebsforall](https://keebsforall.com) + +Make example for this keyboard (after setting up your build environment): + + make keebsforall/coarse60:default + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the top left key (Escape by default) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB (S1) +* **Keycode in layout**: Press the key mapped to `RESET` if it is available + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/keebsforall/coarse60/rules.mk b/keyboards/keebsforall/coarse60/rules.mk new file mode 100644 index 0000000000..803f9f9e5e --- /dev/null +++ b/keyboards/keebsforall/coarse60/rules.mk @@ -0,0 +1,29 @@ +# MCU name +MCU = STM32F072 + +# Bootloader selection +BOOTLOADER = stm32-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +WS2812_DRIVER = spi +ENCODER_ENABLE = yes + + +# Enter lower-power sleep mode when on the ChibiOS idle thread +OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE + +LAYOUTS = alice alice_split_bs From 09b933ad4162ddd08a78d1530a2d39e25c2321f1 Mon Sep 17 00:00:00 2001 From: BenSchaeff <56860818+BenSchaeff@users.noreply.github.com> Date: Sat, 18 Sep 2021 14:05:16 -0500 Subject: [PATCH 030/595] [Keymap] GMMK Pro keymap (#14389) --- .../gmmk/pro/ansi/keymaps/benschaeff/keymap.c | 123 ++++++++++++++++++ 1 file changed, 123 insertions(+) create mode 100644 keyboards/gmmk/pro/ansi/keymaps/benschaeff/keymap.c diff --git a/keyboards/gmmk/pro/ansi/keymaps/benschaeff/keymap.c b/keyboards/gmmk/pro/ansi/keymaps/benschaeff/keymap.c new file mode 100644 index 0000000000..39eac038d1 --- /dev/null +++ b/keyboards/gmmk/pro/ansi/keymaps/benschaeff/keymap.c @@ -0,0 +1,123 @@ +/* Copyright 2021 Glorious, LLC +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + +enum userspace_layers { + QWERTY, + FNLAYER, + POPTAB, +}; + +//custom keycodes +#define MODS_ALT_MASK (MOD_BIT(KC_LALT)) // Make ALT layer for encoder use +#define MODS_CTRL_MASK (MOD_BIT(KC_LCTL)) // Make CTRL layer for encoder use +#define SWAP_L SGUI(KC_LEFT) // Swap application to left display +#define SWAP_R SGUI(KC_RGHT) // Swap application to right display +#define MINI LGUI(KC_DOWN) // Shrink window +#define MAXI LGUI(KC_UP) // Maximize window +#define CLOSEAPPLICATION LALT(KC_F4) // Kill application +#define CLOSETAB LCTL(KC_W) // Kill current tab +#define POPOUT LCTL(LSFT(KC_K)) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +// ESC F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 Prt Rotary(Mute) +// ~ 1 2 3 4 5 6 7 8 9 0 - (=) BackSpc Del +// Tab Q W E R T Y U I O P [ ] \ PgUp +// Caps A S D F G H J K L ; " Enter PgDn +// Sh_L Z X C V B N M , . ? Sh_R Up End +// Ct_L Win_L Alt_L SPACE Alt_R FN Ct_R Left Down Right + + + // The FN key by default maps to a momentary toggle to layer 1 to provide access to the RESET key (to put the board into bootloader mode). Without + // this mapping, you have to open the case to hit the button on the bottom of the PCB (near the USB cable attachment) while plugging in the USB + // cable to get the board into bootloader mode - definitely not fun when you're working on your QMK builds. Remove this and put it back to KC_RGUI + // if that's your preference. + // + // To put the keyboard in bootloader mode, use FN+backslash. If you accidentally put it into bootloader, you can just unplug the USB cable and + // it'll be back to normal when you plug it back in. + + [QWERTY] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_MUTE, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(FNLAYER), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [FNLAYER] = LAYOUT( + CLOSEAPPLICATION, CLOSETAB,_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MEDIA_PLAY_PAUSE, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, SWAP_L , MAXI , SWAP_R , _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET , _______, + _______, _______, MINI , _______, POPOUT, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, KC_TRNS, _______, _______, _______ + ), + + +}; + + +bool encoder_update_user(uint8_t index, bool clockwise) +{ + if (get_mods() & MODS_ALT_MASK) + { + if (clockwise) + { + tap_code(KC_TAB); + } + else + { + tap_code16(S(KC_TAB)); + } + } + else if (get_mods() & MODS_CTRL_MASK) + { + if (clockwise) + { + tap_code(KC_TAB); + } + else + { + tap_code16(S(KC)_TAB)); + + } + } + else if(IS_LAYER_ON(FNLAYER)) + { + if(clockwise) + { + tap_code(KC_MEDIA_NEXT_TRACK); + } + else + { + tap_code(KC_MEDIA_PREV_TRACK); + } + } + else + { + if (clockwise) + { + tap_code(KC_VOLU); + } + else + { + tap_code(KC_VOLD); + } + + } + return true; + +} \ No newline at end of file From 23c3b9decb22e2a5aced2b8d487684370d42fa6d Mon Sep 17 00:00:00 2001 From: Bahrul Hidayat Date: Sun, 19 Sep 2021 03:26:46 +0800 Subject: [PATCH 031/595] [Keyboard] Add dyz60 (#13864) Co-authored-by: Ryan --- keyboards/dyz/dyz60/config.h | 72 ++++++++++++++++++++ keyboards/dyz/dyz60/dyz60.c | 16 +++++ keyboards/dyz/dyz60/dyz60.h | 33 +++++++++ keyboards/dyz/dyz60/info.json | 30 ++++++++ keyboards/dyz/dyz60/keymaps/default/keymap.c | 46 +++++++++++++ keyboards/dyz/dyz60/keymaps/via/keymap.c | 46 +++++++++++++ keyboards/dyz/dyz60/keymaps/via/rules.mk | 1 + keyboards/dyz/dyz60/rules.mk | 22 ++++++ 8 files changed, 266 insertions(+) create mode 100644 keyboards/dyz/dyz60/config.h create mode 100644 keyboards/dyz/dyz60/dyz60.c create mode 100644 keyboards/dyz/dyz60/dyz60.h create mode 100644 keyboards/dyz/dyz60/info.json create mode 100644 keyboards/dyz/dyz60/keymaps/default/keymap.c create mode 100644 keyboards/dyz/dyz60/keymaps/via/keymap.c create mode 100644 keyboards/dyz/dyz60/keymaps/via/rules.mk create mode 100644 keyboards/dyz/dyz60/rules.mk diff --git a/keyboards/dyz/dyz60/config.h b/keyboards/dyz/dyz60/config.h new file mode 100644 index 0000000000..160c8a02b0 --- /dev/null +++ b/keyboards/dyz/dyz60/config.h @@ -0,0 +1,72 @@ +/* +Copyright 2021 dayatz + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xD772 +#define PRODUCT_ID 0x000A +#define DEVICE_VER 0x0001 +#define MANUFACTURER dyz +#define PRODUCT dyz60 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { B0, E6, F0, F5, F4 } +#define MATRIX_COL_PINS { F6, F7, B3, B2, B1, D2, C7, C6, B6, B5, B4, D7, D6, D4 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +#define RGB_DI_PIN B7 +#define RGBLED_NUM 16 +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_RGB_TEST + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Bootmagic Lite key configuration */ +#define BOOTMAGIC_LITE_ROW 0 +#define BOOTMAGIC_LITE_COLUMN 0 + +#define LED_CAPS_LOCK_PIN F1 + +#define TAP_CODE_DELAY 10 // Need this delay for some keys like VOLD/VOLU to work +#define ENCODERS_PAD_A { D0 } +#define ENCODERS_PAD_B { D1 } + +#define DYNAMIC_KEYMAP_LAYER_COUNT 3 diff --git a/keyboards/dyz/dyz60/dyz60.c b/keyboards/dyz/dyz60/dyz60.c new file mode 100644 index 0000000000..b5a2606210 --- /dev/null +++ b/keyboards/dyz/dyz60/dyz60.c @@ -0,0 +1,16 @@ +/* Copyright 2021 dayatz + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "dyz60.h" diff --git a/keyboards/dyz/dyz60/dyz60.h b/keyboards/dyz/dyz60/dyz60.h new file mode 100644 index 0000000000..bc3aae7afb --- /dev/null +++ b/keyboards/dyz/dyz60/dyz60.h @@ -0,0 +1,33 @@ +/* Copyright 2021 dayatz + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" +#define KNO KC_NO + +#define LAYOUT_all( \ + K00, K01, K02, K03, K04, K05, K45, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ + K40, K41, K42, K46, K4A, K4B, K4C, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \ + { K40, K41, K42, KNO, KNO, K45, K46, KNO, KNO, KNO, K4A, K4B, K4C, K4D } \ +} diff --git a/keyboards/dyz/dyz60/info.json b/keyboards/dyz/dyz60/info.json new file mode 100644 index 0000000000..9e8ea860c4 --- /dev/null +++ b/keyboards/dyz/dyz60/info.json @@ -0,0 +1,30 @@ +{ + "keyboard_name": "dyz60", + "url": "https://github.com/dayatz/mechanical-keyboards/tree/master/dyz60", + "maintainer": "dayatz", + "diode_direction": "COL2ROW", + "matrix_pins": { + "cols": ["F6", "F7", "B3", "B2", "B1", "D2", "C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4"], + "rows": ["B0", "E6", "F0", "F5", "F4"] + }, + "rgblight": { + "led_count": 16, + "pin": "B7", + "hue_steps": 10, + "saturation_steps": 10, + "brightness_steps": 10, + "animations": { + "all": true + } + }, + "usb": { + "vid": "0xD772", + "pid": "0x000A", + "device_ver": "0x0001" + }, + "layouts": { + "LAYOUT": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"~", "x":13, "y":0}, {"label":"|", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Win", "x":11, "y":4, "w":1.5}, {"label":"Menu", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}] + } + } +} diff --git a/keyboards/dyz/dyz60/keymaps/default/keymap.c b/keyboards/dyz/dyz60/keymaps/default/keymap.c new file mode 100644 index 0000000000..62bb1a4075 --- /dev/null +++ b/keyboards/dyz/dyz60/keymaps/default/keymap.c @@ -0,0 +1,46 @@ +/* Copyright 2021 dayatz + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +enum layer_names { + _BASE, + _FN, + _FN2 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_all( /* Base */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FN), + KC_LCTL, KC_LWIN, KC_LALT, KC_SPC, KC_RALT, KC_RWIN, KC_MENU, KC_RCTL + ), + [_FN] = LAYOUT_all( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_UP, KC_END, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_RIGHT, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DOWN, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______ + ), + [_FN2] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/dyz/dyz60/keymaps/via/keymap.c b/keyboards/dyz/dyz60/keymaps/via/keymap.c new file mode 100644 index 0000000000..62bb1a4075 --- /dev/null +++ b/keyboards/dyz/dyz60/keymaps/via/keymap.c @@ -0,0 +1,46 @@ +/* Copyright 2021 dayatz + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +enum layer_names { + _BASE, + _FN, + _FN2 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_all( /* Base */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FN), + KC_LCTL, KC_LWIN, KC_LALT, KC_SPC, KC_RALT, KC_RWIN, KC_MENU, KC_RCTL + ), + [_FN] = LAYOUT_all( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_UP, KC_END, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_RIGHT, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DOWN, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______ + ), + [_FN2] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/dyz/dyz60/keymaps/via/rules.mk b/keyboards/dyz/dyz60/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/dyz/dyz60/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/dyz/dyz60/rules.mk b/keyboards/dyz/dyz60/rules.mk new file mode 100644 index 0000000000..02bed4240e --- /dev/null +++ b/keyboards/dyz/dyz60/rules.mk @@ -0,0 +1,22 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +ENCODER_ENABLE = yes From e3e58aae6aaf4eb5f5a26c46dcc3d249cffb1a5f Mon Sep 17 00:00:00 2001 From: kaylanm <1063516+kaylanm@users.noreply.github.com> Date: Sat, 18 Sep 2021 15:27:49 -0400 Subject: [PATCH 032/595] [Keyboard] Add superuser keyboard (#13840) Co-authored-by: Ryan --- keyboards/superuser/ext/config.h | 54 +++++++++++++++++++ keyboards/superuser/ext/ext.c | 16 ++++++ keyboards/superuser/ext/ext.h | 32 +++++++++++ keyboards/superuser/ext/info.json | 10 ++++ .../superuser/ext/keymaps/default/keymap.c | 33 ++++++++++++ .../superuser/ext/keymaps/default/readme.md | 1 + keyboards/superuser/ext/keymaps/via/keymap.c | 49 +++++++++++++++++ keyboards/superuser/ext/keymaps/via/readme.md | 1 + keyboards/superuser/ext/keymaps/via/rules.mk | 1 + keyboards/superuser/ext/readme.md | 17 ++++++ keyboards/superuser/ext/rules.mk | 22 ++++++++ keyboards/superuser/frl/config.h | 54 +++++++++++++++++++ keyboards/superuser/frl/frl.c | 16 ++++++ keyboards/superuser/frl/frl.h | 32 +++++++++++ keyboards/superuser/frl/info.json | 10 ++++ .../superuser/frl/keymaps/default/keymap.c | 33 ++++++++++++ .../superuser/frl/keymaps/default/readme.md | 1 + keyboards/superuser/frl/keymaps/via/keymap.c | 49 +++++++++++++++++ keyboards/superuser/frl/keymaps/via/readme.md | 1 + keyboards/superuser/frl/keymaps/via/rules.mk | 1 + keyboards/superuser/frl/readme.md | 17 ++++++ keyboards/superuser/frl/rules.mk | 22 ++++++++ keyboards/superuser/tkl/config.h | 54 +++++++++++++++++++ keyboards/superuser/tkl/info.json | 10 ++++ .../superuser/tkl/keymaps/default/keymap.c | 35 ++++++++++++ .../superuser/tkl/keymaps/default/readme.md | 1 + keyboards/superuser/tkl/keymaps/via/keymap.c | 53 ++++++++++++++++++ keyboards/superuser/tkl/keymaps/via/readme.md | 1 + keyboards/superuser/tkl/keymaps/via/rules.mk | 1 + keyboards/superuser/tkl/readme.md | 17 ++++++ keyboards/superuser/tkl/rules.mk | 22 ++++++++ keyboards/superuser/tkl/tkl.c | 16 ++++++ keyboards/superuser/tkl/tkl.h | 34 ++++++++++++ 33 files changed, 716 insertions(+) create mode 100644 keyboards/superuser/ext/config.h create mode 100644 keyboards/superuser/ext/ext.c create mode 100644 keyboards/superuser/ext/ext.h create mode 100644 keyboards/superuser/ext/info.json create mode 100644 keyboards/superuser/ext/keymaps/default/keymap.c create mode 100644 keyboards/superuser/ext/keymaps/default/readme.md create mode 100644 keyboards/superuser/ext/keymaps/via/keymap.c create mode 100644 keyboards/superuser/ext/keymaps/via/readme.md create mode 100644 keyboards/superuser/ext/keymaps/via/rules.mk create mode 100644 keyboards/superuser/ext/readme.md create mode 100644 keyboards/superuser/ext/rules.mk create mode 100644 keyboards/superuser/frl/config.h create mode 100644 keyboards/superuser/frl/frl.c create mode 100644 keyboards/superuser/frl/frl.h create mode 100644 keyboards/superuser/frl/info.json create mode 100644 keyboards/superuser/frl/keymaps/default/keymap.c create mode 100644 keyboards/superuser/frl/keymaps/default/readme.md create mode 100644 keyboards/superuser/frl/keymaps/via/keymap.c create mode 100644 keyboards/superuser/frl/keymaps/via/readme.md create mode 100644 keyboards/superuser/frl/keymaps/via/rules.mk create mode 100644 keyboards/superuser/frl/readme.md create mode 100644 keyboards/superuser/frl/rules.mk create mode 100644 keyboards/superuser/tkl/config.h create mode 100644 keyboards/superuser/tkl/info.json create mode 100644 keyboards/superuser/tkl/keymaps/default/keymap.c create mode 100644 keyboards/superuser/tkl/keymaps/default/readme.md create mode 100644 keyboards/superuser/tkl/keymaps/via/keymap.c create mode 100644 keyboards/superuser/tkl/keymaps/via/readme.md create mode 100644 keyboards/superuser/tkl/keymaps/via/rules.mk create mode 100644 keyboards/superuser/tkl/readme.md create mode 100644 keyboards/superuser/tkl/rules.mk create mode 100644 keyboards/superuser/tkl/tkl.c create mode 100644 keyboards/superuser/tkl/tkl.h diff --git a/keyboards/superuser/ext/config.h b/keyboards/superuser/ext/config.h new file mode 100644 index 0000000000..77583a5825 --- /dev/null +++ b/keyboards/superuser/ext/config.h @@ -0,0 +1,54 @@ +/* +Copyright 2021 superuser + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x5355 +#define PRODUCT_ID 0x4558 +#define DEVICE_VER 0x0001 +#define MANUFACTURER superuser +#define PRODUCT ext + + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 19 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } +#define MATRIX_COL_PINS { B2, B1, F0, F1, F4, F5, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4, E6, B0, B3} +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +#define LED_CAPS_LOCK_PIN B7 diff --git a/keyboards/superuser/ext/ext.c b/keyboards/superuser/ext/ext.c new file mode 100644 index 0000000000..0715f7d808 --- /dev/null +++ b/keyboards/superuser/ext/ext.c @@ -0,0 +1,16 @@ +/* Copyright 2021 superuser + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "ext.h" diff --git a/keyboards/superuser/ext/ext.h b/keyboards/superuser/ext/ext.h new file mode 100644 index 0000000000..f83b5bed19 --- /dev/null +++ b/keyboards/superuser/ext/ext.h @@ -0,0 +1,32 @@ +/* Copyright 2021 superuser + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" + +#define LAYOUT_tkl(\ + KF10, KF11, K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K312, K114, K115, K116, \ + KF20, KF21, K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, \ + KF30, KF31, K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, \ + KF40, KF41, K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K415, \ + KF50, KF51, K500, K501, K502, K506, K511, K512, K513, K514, K515, K516 \ +) { \ + { KF10, KF11, K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116 }, \ + { KF20, KF21, K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216 }, \ + { KF30, KF31, K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, KC_NO, KC_NO, KC_NO }, \ + { KF40, KF41, K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, KC_NO, K415, KC_NO }, \ + { KF50, KF51, K500, K501, K502, KC_NO, KC_NO, KC_NO, K506, KC_NO, KC_NO, KC_NO, KC_NO, K511, K512, K513, K514, K515, K516 } \ +} diff --git a/keyboards/superuser/ext/info.json b/keyboards/superuser/ext/info.json new file mode 100644 index 0000000000..272df98a9a --- /dev/null +++ b/keyboards/superuser/ext/info.json @@ -0,0 +1,10 @@ +{ + "keyboard_name": "ext", + "url": "", + "maintainer": "superuser", + "layouts": { + "LAYOUT": { + "layout": [{"label":"F1", "x":0, "y":0}, {"label":"F2", "x":1, "y":0}, {"label":"~", "x":2.25, "y":0}, {"label":"!", "x":3.25, "y":0}, {"label":"@", "x":4.25, "y":0}, {"label":"#", "x":5.25, "y":0}, {"label":"$", "x":6.25, "y":0}, {"label":"%", "x":7.25, "y":0}, {"label":"^", "x":8.25, "y":0}, {"label":"&", "x":9.25, "y":0}, {"label":"*", "x":10.25, "y":0}, {"label":"(", "x":11.25, "y":0}, {"label":")", "x":12.25, "y":0}, {"label":"_", "x":13.25, "y":0}, {"label":"+", "x":14.25, "y":0}, {"label":"Bksp", "x":15.25, "y":0}, {"label":"Bksp", "x":16.25, "y":0}, {"label":"Insert", "x":17.5, "y":0}, {"label":"Home", "x":18.5, "y":0}, {"label":"PgUp", "x":19.5, "y":0}, {"label":"F3", "x":0, "y":1}, {"label":"F4", "x":1, "y":1}, {"label":"Tab", "x":2.25, "y":1, "w":1.5}, {"label":"Q", "x":3.75, "y":1}, {"label":"W", "x":4.75, "y":1}, {"label":"E", "x":5.75, "y":1}, {"label":"R", "x":6.75, "y":1}, {"label":"T", "x":7.75, "y":1}, {"label":"Y", "x":8.75, "y":1}, {"label":"U", "x":9.75, "y":1}, {"label":"I", "x":10.75, "y":1}, {"label":"O", "x":11.75, "y":1}, {"label":"P", "x":12.75, "y":1}, {"label":"{", "x":13.75, "y":1}, {"label":"}", "x":14.75, "y":1}, {"label":"|", "x":15.75, "y":1, "w":1.5}, {"label":"Delete", "x":17.5, "y":1}, {"label":"End", "x":18.5, "y":1}, {"label":"PgDn", "x":19.5, "y":1}, {"label":"F5", "x":0, "y":2}, {"label":"F6", "x":1, "y":2}, {"label":"Caps Lock", "x":2.25, "y":2, "w":1.75}, {"label":"A", "x":4, "y":2}, {"label":"S", "x":5, "y":2}, {"label":"D", "x":6, "y":2}, {"label":"F", "x":7, "y":2}, {"label":"G", "x":8, "y":2}, {"label":"H", "x":9, "y":2}, {"label":"J", "x":10, "y":2}, {"label":"K", "x":11, "y":2}, {"label":"L", "x":12, "y":2}, {"label":":", "x":13, "y":2}, {"label":"\"", "x":14, "y":2}, {"label":"Enter", "x":15, "y":2, "w":2.25}, {"label":"F7", "x":0, "y":3}, {"label":"F8", "x":1, "y":3}, {"label":"Shift", "x":2.25, "y":3, "w":1.25}, {"label":"|", "x":3.5, "y":3}, {"label":"Z", "x":4.5, "y":3}, {"label":"X", "x":5.5, "y":3}, {"label":"C", "x":6.5, "y":3}, {"label":"V", "x":7.5, "y":3}, {"label":"B", "x":8.5, "y":3}, {"label":"N", "x":9.5, "y":3}, {"label":"M", "x":10.5, "y":3}, {"label":"<", "x":11.5, "y":3}, {"label":">", "x":12.5, "y":3}, {"label":"?", "x":13.5, "y":3}, {"label":"Shift", "x":14.5, "y":3, "w":1.75}, {"label":"Fn", "x":16.25, "y":3}, {"label":"\u2191", "x":18.5, "y":3}, {"label":"F9", "x":0, "y":4}, {"label":"F10", "x":1, "y":4}, {"label":"Ctrl", "x":2.25, "y":4, "w":1.5}, {"label":"Win", "x":3.75, "y":4}, {"label":"Alt", "x":4.75, "y":4, "w":1.5}, {"x":6.25, "y":4, "w":7}, {"label":"Alt", "x":13.25, "y":4, "w":1.5}, {"label":"Win", "x":14.75, "y":4}, {"label":"Ctrl", "x":15.75, "y":4, "w":1.5}, {"label":"\u2190", "x":17.5, "y":4}, {"label":"\u2193", "x":18.5, "y":4}, {"label":"\u2192", "x":19.5, "y":4}] + } + } +} diff --git a/keyboards/superuser/ext/keymaps/default/keymap.c b/keyboards/superuser/ext/keymaps/default/keymap.c new file mode 100644 index 0000000000..cc3259cd58 --- /dev/null +++ b/keyboards/superuser/ext/keymaps/default/keymap.c @@ -0,0 +1,33 @@ +/* Copyright 2021 superuser + + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_tkl( + KC_F1, KC_F2, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_F3, KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_F5, KC_F6, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_F7, KC_F8, KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP, + KC_F9, KC_F10, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + + [1] = LAYOUT_tkl( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), +}; diff --git a/keyboards/superuser/ext/keymaps/default/readme.md b/keyboards/superuser/ext/keymaps/default/readme.md new file mode 100644 index 0000000000..846c97d3be --- /dev/null +++ b/keyboards/superuser/ext/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for ext diff --git a/keyboards/superuser/ext/keymaps/via/keymap.c b/keyboards/superuser/ext/keymaps/via/keymap.c new file mode 100644 index 0000000000..919c45d884 --- /dev/null +++ b/keyboards/superuser/ext/keymaps/via/keymap.c @@ -0,0 +1,49 @@ +/* Copyright 2021 superuser + + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_tkl( + KC_F1, KC_F2, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_F3, KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_F5, KC_F6, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_F7, KC_F8, KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP, + KC_F9, KC_F10, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + + [1] = LAYOUT_tkl( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [2] = LAYOUT_tkl( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [3] = LAYOUT_tkl( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + +}; + diff --git a/keyboards/superuser/ext/keymaps/via/readme.md b/keyboards/superuser/ext/keymaps/via/readme.md new file mode 100644 index 0000000000..f17cd8212a --- /dev/null +++ b/keyboards/superuser/ext/keymaps/via/readme.md @@ -0,0 +1 @@ +# The default VIA keymap for ext diff --git a/keyboards/superuser/ext/keymaps/via/rules.mk b/keyboards/superuser/ext/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/superuser/ext/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/superuser/ext/readme.md b/keyboards/superuser/ext/readme.md new file mode 100644 index 0000000000..1468d21dc1 --- /dev/null +++ b/keyboards/superuser/ext/readme.md @@ -0,0 +1,17 @@ +# superuser ext + +An EXT TKL PCB supporting 7u bottom row only. + +* Keyboard Maintainer: superuser +* Hardware Supported: superuser ext +* Hardware Availability: Group buy + +Make example for this keyboard (after setting up your build environment): + + make superuser/ext:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## hardware information + +One LED only, in caps lock. diff --git a/keyboards/superuser/ext/rules.mk b/keyboards/superuser/ext/rules.mk new file mode 100644 index 0000000000..419f20a431 --- /dev/null +++ b/keyboards/superuser/ext/rules.mk @@ -0,0 +1,22 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = qmk-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +LTO_ENABLE = yes diff --git a/keyboards/superuser/frl/config.h b/keyboards/superuser/frl/config.h new file mode 100644 index 0000000000..47ff3decf7 --- /dev/null +++ b/keyboards/superuser/frl/config.h @@ -0,0 +1,54 @@ +/* +Copyright 2021 superuser + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x5355 +#define PRODUCT_ID 0x4652 +#define DEVICE_VER 0x0001 +#define MANUFACTURER superuser +#define PRODUCT frl + + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 17 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 } +#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4, E6, B0, B3} +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +#define LED_CAPS_LOCK_PIN B7 diff --git a/keyboards/superuser/frl/frl.c b/keyboards/superuser/frl/frl.c new file mode 100644 index 0000000000..4ccf168cfa --- /dev/null +++ b/keyboards/superuser/frl/frl.c @@ -0,0 +1,16 @@ +/* Copyright 2021 superuser + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "frl.h" diff --git a/keyboards/superuser/frl/frl.h b/keyboards/superuser/frl/frl.h new file mode 100644 index 0000000000..9d1af5068e --- /dev/null +++ b/keyboards/superuser/frl/frl.h @@ -0,0 +1,32 @@ +/* Copyright 2021 superuser + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" + +#define LAYOUT_tkl(\ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K312, K114, K115, K116, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, \ + K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K415, \ + K500, K501, K502, K506, K511, K512, K513, K514, K515, K516 \ +) { \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216 }, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, KC_NO, KC_NO, KC_NO }, \ + { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, KC_NO, K415, KC_NO }, \ + { K500, K501, K502, KC_NO, KC_NO, KC_NO, K506, KC_NO, KC_NO, KC_NO, KC_NO, K511, K512, K513, K514, K515, K516 } \ +} diff --git a/keyboards/superuser/frl/info.json b/keyboards/superuser/frl/info.json new file mode 100644 index 0000000000..d565bcde38 --- /dev/null +++ b/keyboards/superuser/frl/info.json @@ -0,0 +1,10 @@ +{ + "keyboard_name": "frl", + "url": "", + "maintainer": "superuser", + "layouts": { + "LAYOUT_tkl": { + "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Bksp", "x":13, "y":0}, {"label":"Bksp", "x":14, "y":0}, {"label":"Insert", "x":15.25, "y":0}, {"label":"Home", "x":16.25, "y":0}, {"label":"PgUp", "x":17.25, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Delete", "x":15.25, "y":1}, {"label":"End", "x":16.25, "y":1}, {"label":"PgDn", "x":17.25, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"label":"|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"\u2191", "x":16.25, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Win", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}, {"label":"\u2190", "x":15.25, "y":4}, {"label":"\u2193", "x":16.25, "y":4}, {"label":"\u2192", "x":17.25, "y":4}] + } + } +} diff --git a/keyboards/superuser/frl/keymaps/default/keymap.c b/keyboards/superuser/frl/keymaps/default/keymap.c new file mode 100644 index 0000000000..5dd6d1f1ab --- /dev/null +++ b/keyboards/superuser/frl/keymaps/default/keymap.c @@ -0,0 +1,33 @@ +/* Copyright 2021 superuser + + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_tkl( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + + [1] = LAYOUT_tkl( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), +}; diff --git a/keyboards/superuser/frl/keymaps/default/readme.md b/keyboards/superuser/frl/keymaps/default/readme.md new file mode 100644 index 0000000000..806f56f832 --- /dev/null +++ b/keyboards/superuser/frl/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for frl diff --git a/keyboards/superuser/frl/keymaps/via/keymap.c b/keyboards/superuser/frl/keymaps/via/keymap.c new file mode 100644 index 0000000000..3f9f3377ac --- /dev/null +++ b/keyboards/superuser/frl/keymaps/via/keymap.c @@ -0,0 +1,49 @@ +/* Copyright 2021 superuser + + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_tkl( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + + [1] = LAYOUT_tkl( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [2] = LAYOUT_tkl( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [3] = LAYOUT_tkl( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + +}; + diff --git a/keyboards/superuser/frl/keymaps/via/readme.md b/keyboards/superuser/frl/keymaps/via/readme.md new file mode 100644 index 0000000000..e4b8616e12 --- /dev/null +++ b/keyboards/superuser/frl/keymaps/via/readme.md @@ -0,0 +1 @@ +# The default VIA keymap for frl diff --git a/keyboards/superuser/frl/keymaps/via/rules.mk b/keyboards/superuser/frl/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/superuser/frl/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/superuser/frl/readme.md b/keyboards/superuser/frl/readme.md new file mode 100644 index 0000000000..59c9733ebd --- /dev/null +++ b/keyboards/superuser/frl/readme.md @@ -0,0 +1,17 @@ +# superuser frl + +An FRL TKL PCB supporting 7u bottom row only. + +* Keyboard Maintainer: superuser +* Hardware Supported: superuser frl +* Hardware Availability: Group buy + +Make example for this keyboard (after setting up your build environment): + + make superuser/frl:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## hardware information + +One LED only, in caps lock. diff --git a/keyboards/superuser/frl/rules.mk b/keyboards/superuser/frl/rules.mk new file mode 100644 index 0000000000..419f20a431 --- /dev/null +++ b/keyboards/superuser/frl/rules.mk @@ -0,0 +1,22 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = qmk-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +LTO_ENABLE = yes diff --git a/keyboards/superuser/tkl/config.h b/keyboards/superuser/tkl/config.h new file mode 100644 index 0000000000..e60435e6c0 --- /dev/null +++ b/keyboards/superuser/tkl/config.h @@ -0,0 +1,54 @@ +/* +Copyright 2021 superuser + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x5355 +#define PRODUCT_ID 0x544B +#define DEVICE_VER 0x0001 +#define MANUFACTURER superuser +#define PRODUCT tkl + + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 17 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { B2, D0, D1, D2, D3, D5 } +#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4, E6, B0, B3} +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +#define LED_CAPS_LOCK_PIN B7 diff --git a/keyboards/superuser/tkl/info.json b/keyboards/superuser/tkl/info.json new file mode 100644 index 0000000000..0a8f2a3cde --- /dev/null +++ b/keyboards/superuser/tkl/info.json @@ -0,0 +1,10 @@ +{ + "keyboard_name": "tkl", + "url": "", + "maintainer": "superuser", + "layouts": { + "LAYOUT": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"label":"Bksp", "x":13, "y":1.25}, {"label":"Bksp", "x":14, "y":1.25}, {"label":"Insert", "x":15.25, "y":1.25}, {"label":"Home", "x":16.25, "y":1.25}, {"label":"PgUp", "x":17.25, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"{", "x":11.5, "y":2.25}, {"label":"}", "x":12.5, "y":2.25}, {"label":"|", "x":13.5, "y":2.25, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.25}, {"label":"End", "x":16.25, "y":2.25}, {"label":"PgDn", "x":17.25, "y":2.25}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":":", "x":10.75, "y":3.25}, {"label":"\"", "x":11.75, "y":3.25}, {"label":"Enter", "x":12.75, "y":3.25, "w":2.25}, {"label":"Shift", "x":0, "y":4.25, "w":1.25}, {"label":"|", "x":1.25, "y":4.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":1.75}, {"label":"Fn", "x":14, "y":4.25}, {"label":"\u2191", "x":16.25, "y":4.25}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.5}, {"label":"Win", "x":1.5, "y":5.25}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.5}, {"x":4, "y":5.25, "w":7}, {"label":"Alt", "x":11, "y":5.25, "w":1.5}, {"label":"Win", "x":12.5, "y":5.25}, {"label":"Ctrl", "x":13.5, "y":5.25, "w":1.5}, {"label":"\u2190", "x":15.25, "y":5.25}, {"label":"\u2193", "x":16.25, "y":5.25}, {"label":"\u2192", "x":17.25, "y":5.25}] + } + } +} diff --git a/keyboards/superuser/tkl/keymaps/default/keymap.c b/keyboards/superuser/tkl/keymaps/default/keymap.c new file mode 100644 index 0000000000..6eada87c84 --- /dev/null +++ b/keyboards/superuser/tkl/keymaps/default/keymap.c @@ -0,0 +1,35 @@ +/* Copyright 2021 superuser + + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_tkl( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + + [1] = LAYOUT_tkl( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), +}; diff --git a/keyboards/superuser/tkl/keymaps/default/readme.md b/keyboards/superuser/tkl/keymaps/default/readme.md new file mode 100644 index 0000000000..4b2def1236 --- /dev/null +++ b/keyboards/superuser/tkl/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for tkl diff --git a/keyboards/superuser/tkl/keymaps/via/keymap.c b/keyboards/superuser/tkl/keymaps/via/keymap.c new file mode 100644 index 0000000000..f828ccc515 --- /dev/null +++ b/keyboards/superuser/tkl/keymaps/via/keymap.c @@ -0,0 +1,53 @@ +/* Copyright 2021 superuser + + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_tkl( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + + [1] = LAYOUT_tkl( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [2] = LAYOUT_tkl( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [3] = LAYOUT_tkl( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + +}; + diff --git a/keyboards/superuser/tkl/keymaps/via/readme.md b/keyboards/superuser/tkl/keymaps/via/readme.md new file mode 100644 index 0000000000..89f15e18a4 --- /dev/null +++ b/keyboards/superuser/tkl/keymaps/via/readme.md @@ -0,0 +1 @@ +# The default VIA keymap for tkl diff --git a/keyboards/superuser/tkl/keymaps/via/rules.mk b/keyboards/superuser/tkl/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/superuser/tkl/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/superuser/tkl/readme.md b/keyboards/superuser/tkl/readme.md new file mode 100644 index 0000000000..be5a2cc3a5 --- /dev/null +++ b/keyboards/superuser/tkl/readme.md @@ -0,0 +1,17 @@ +# superuser tkl + +An F12 TKL PCB supporting 7u bottom row only. + +* Keyboard Maintainer: superuser +* Hardware Supported: superuser tkl +* Hardware Availability: Group buy + +Make example for this keyboard (after setting up your build environment): + + make superuser/tkl:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## hardware information + +One LED only, in caps lock. diff --git a/keyboards/superuser/tkl/rules.mk b/keyboards/superuser/tkl/rules.mk new file mode 100644 index 0000000000..419f20a431 --- /dev/null +++ b/keyboards/superuser/tkl/rules.mk @@ -0,0 +1,22 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = qmk-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +LTO_ENABLE = yes diff --git a/keyboards/superuser/tkl/tkl.c b/keyboards/superuser/tkl/tkl.c new file mode 100644 index 0000000000..b59a26f44e --- /dev/null +++ b/keyboards/superuser/tkl/tkl.c @@ -0,0 +1,16 @@ +/* Copyright 2021 superuser + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "tkl.h" diff --git a/keyboards/superuser/tkl/tkl.h b/keyboards/superuser/tkl/tkl.h new file mode 100644 index 0000000000..31ed941d3e --- /dev/null +++ b/keyboards/superuser/tkl/tkl.h @@ -0,0 +1,34 @@ +/* Copyright 2021 superuser + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" + +#define LAYOUT_tkl(\ + K000, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K312, K114, K115, K116, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, \ + K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K415, \ + K500, K501, K502, K506, K511, K512, K513, K514, K515, K516 \ +) { \ + { K000, KC_NO, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216 }, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, KC_NO, KC_NO, KC_NO }, \ + { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, KC_NO, K415, KC_NO }, \ + { K500, K501, K502, KC_NO, KC_NO, KC_NO, K506, KC_NO, KC_NO, KC_NO, KC_NO, K511, K512, K513, K514, K515, K516 } \ +} From c2f3c418f33bf5d8d60e005de4d076949a7c7098 Mon Sep 17 00:00:00 2001 From: MakotoKurauchi Date: Sun, 19 Sep 2021 04:28:41 +0900 Subject: [PATCH 033/595] [Keyboard] Add new keyboard quick17 (#13703) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan Co-authored-by: keyaki-namiki <28521374+keyaki-namiki@users.noreply.github.com> --- keyboards/yushakobo/quick17/config.h | 143 ++++++++++++++++++ keyboards/yushakobo/quick17/info.json | 14 ++ .../quick17/keymaps/default/keymap.c | 113 ++++++++++++++ .../quick17/keymaps/default/readme.md | 64 ++++++++ .../yushakobo/quick17/keymaps/via/keymap.c | 113 ++++++++++++++ .../yushakobo/quick17/keymaps/via/readme.md | 62 ++++++++ .../yushakobo/quick17/keymaps/via/rules.mk | 3 + keyboards/yushakobo/quick17/quick17.c | 37 +++++ keyboards/yushakobo/quick17/quick17.h | 38 +++++ keyboards/yushakobo/quick17/quick17_prefs.c | 29 ++++ keyboards/yushakobo/quick17/quick17_prefs.h | 28 ++++ keyboards/yushakobo/quick17/readme.md | 19 +++ keyboards/yushakobo/quick17/rgb_matrix_kb.inc | 117 ++++++++++++++ keyboards/yushakobo/quick17/rules.mk | 28 ++++ 14 files changed, 808 insertions(+) create mode 100644 keyboards/yushakobo/quick17/config.h create mode 100644 keyboards/yushakobo/quick17/info.json create mode 100644 keyboards/yushakobo/quick17/keymaps/default/keymap.c create mode 100644 keyboards/yushakobo/quick17/keymaps/default/readme.md create mode 100644 keyboards/yushakobo/quick17/keymaps/via/keymap.c create mode 100644 keyboards/yushakobo/quick17/keymaps/via/readme.md create mode 100644 keyboards/yushakobo/quick17/keymaps/via/rules.mk create mode 100644 keyboards/yushakobo/quick17/quick17.c create mode 100644 keyboards/yushakobo/quick17/quick17.h create mode 100644 keyboards/yushakobo/quick17/quick17_prefs.c create mode 100644 keyboards/yushakobo/quick17/quick17_prefs.h create mode 100644 keyboards/yushakobo/quick17/readme.md create mode 100644 keyboards/yushakobo/quick17/rgb_matrix_kb.inc create mode 100644 keyboards/yushakobo/quick17/rules.mk diff --git a/keyboards/yushakobo/quick17/config.h b/keyboards/yushakobo/quick17/config.h new file mode 100644 index 0000000000..ab33c84082 --- /dev/null +++ b/keyboards/yushakobo/quick17/config.h @@ -0,0 +1,143 @@ +/* +Copyright 2021 yushakobo + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x3265 +#define PRODUCT_ID 0x0006 +#define DEVICE_VER 0x0001 +#define MANUFACTURER yushakobo +#define PRODUCT quick17 + +/* key matrix size */ +#define MATRIX_ROWS 3 +#define MATRIX_COLS 6 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { F4, B3, B6 } +#define MATRIX_COL_PINS { F5, D4, E6, F7, C6, D7 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +//#define BACKLIGHT_PIN B7 +//#define BACKLIGHT_LEVELS 3 +//#define BACKLIGHT_BREATHING + +#define RGB_DI_PIN D2 +#define RGBLED_NUM 18 + +#ifdef RGB_MATRIX_ENABLE +# define DRIVER_LED_TOTAL RGBLED_NUM +# define RGB_MATRIX_KEYPRESSES // reacts to keypresses +// # define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses) +// # define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects +# define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended +# define RGB_MATRIX_FRAMEBUFFER_EFFECTS +// # define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness) +// # define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) +# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash. +// HSV_TEAL +// #define RGB_MATRIX_STARTUP_HUE 128 +// #define RGB_MATRIX_STARTUP_SAT 255 + #define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS +# define RGB_MATRIX_HUE_STEP 8 +# define RGB_MATRIX_SAT_STEP 8 +# define RGB_MATRIX_VAL_STEP 8 +# define RGB_MATRIX_SPD_STEP 10 +#endif + + + + +#ifdef RGBLIGHT_ENABLE +# define RGBLIGHT_LED_MAP {\ + 6, 7, 12, 13, 14, 15,\ + 16, 17, 11, 10, 9, 8,\ + 0, 1, 2, 3, 4, 5\ + } +# define RGBLIGHT_HUE_STEP 8 +# define RGBLIGHT_SAT_STEP 8 +# define RGBLIGHT_VAL_STEP 8 +# define RGBLIGHT_LIMIT_VAL 150 /* The maximum brightness level */ +//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ +//# define RGBLIGHT_ANIMATIONS +/*== or choose animations ==*/ +//# define RGBLIGHT_EFFECT_BREATHING +# define RGBLIGHT_EFFECT_RAINBOW_MOOD +# define RGBLIGHT_EFFECT_RAINBOW_SWIRL +//# define RGBLIGHT_EFFECT_SNAKE +//# define RGBLIGHT_EFFECT_KNIGHT +# define RGBLIGHT_EFFECT_CHRISTMAS +# define RGBLIGHT_EFFECT_STATIC_GRADIENT +# define RGBLIGHT_EFFECT_RGB_TEST +//# define RGBLIGHT_EFFECT_ALTERNATING +/*== customize breathing effect ==*/ +/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +/*==== use exp() and sin() ====*/ +//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 + +#define RGBLIGHT_LAYERS +#define RGBLIGHT_MAX_LAYERS 8 + +#endif + +#ifdef ENCODER_ENABLE +#define ENCODERS_PAD_A { B4 } +#define ENCODERS_PAD_B { B5 } +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/yushakobo/quick17/info.json b/keyboards/yushakobo/quick17/info.json new file mode 100644 index 0000000000..eb971110c0 --- /dev/null +++ b/keyboards/yushakobo/quick17/info.json @@ -0,0 +1,14 @@ +{ + "keyboard_name": "quick17", + "url": "https://shop.yushakobo.jp/products/quick17", + "maintainer": "yushakobo", + "layouts": { + "LAYOUT": { + "layout": [ + {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, + {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, + {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2} + ] + } + } +} diff --git a/keyboards/yushakobo/quick17/keymaps/default/keymap.c b/keyboards/yushakobo/quick17/keymaps/default/keymap.c new file mode 100644 index 0000000000..a3873bc1ee --- /dev/null +++ b/keyboards/yushakobo/quick17/keymaps/default/keymap.c @@ -0,0 +1,113 @@ +/* Copyright 2021 yushakobo + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +// Defines the keycodes used by our macros in process_record_user +enum custom_keycodes { + KC_LANG +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_CONTROL] = LAYOUT( + KC_TAB, KC_PGUP,KC_UP, KC_PGDN,KC_HOME,KC_INS, + KC_LCTL,KC_LEFT,KC_DOWN,KC_RGHT,KC_END, KC_DEL, + KC_LSFT,KC_LGUI,KC_ESC, KC_LALT,LT(3,KC_SPC),TO(1) + ), + [_EDIT1] = LAYOUT( + KC_ESC, KC_W, KC_E, KC_R, KC_Y, KC_BSPC, + KC_LCTL,KC_A, KC_D, KC_F, KC_H, LCTL(KC_Z), + KC_LSFT,KC_X, KC_V, KC_B, LT(2,KC_SPC),LCTL(KC_S) + ), + [_EDIT2] = LAYOUT( + KC_ESC, KC_Q, KC_BTN3,KC_INS, KC_ENT, KC_DEL, + KC_LCTL,KC_LBRC,KC_RBRC,KC_PGDN,KC_PGUP,LCTL(KC_Y), + KC_LSFT,TO(3), RGB_TOG,TO(0), _______,KC_NO + ), + [_FN] = LAYOUT( + KC_ESC, KC_LANG,KC_NO, RGB_TOG,KC_MNXT,KC_VOLU, + KC_CAPS,KC_NLCK,KC_NO, RGB_MOD,KC_MPRV,KC_VOLD, + CG_NORM,LCG_SWP,EEP_RST,RESET, TO(0), KC_MUTE + ) +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case KC_LANG: + if (record->event.pressed){ + if (keymap_config.swap_lctl_lgui == false){ + tap_code16(LALT(KC_GRV)); + } else { + if(input_mode()){ + register_code(KC_LANG2); + set_input_mode(false); + } else { + register_code(KC_LANG1); + set_input_mode(true); + } + } + } else { + unregister_code(KC_LANG1); + unregister_code(KC_LANG2); + } + break; + default: + break; + } + return true; +} + +bool encoder_update_user(uint8_t index, bool clockwise){ + if (index == 0) { + if (IS_LAYER_ON(_EDIT2)){ + if (clockwise) { + tap_code(KC_LBRC); + } else { + tap_code(KC_RBRC); + } + } else if (IS_LAYER_ON(_EDIT1)){ + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } else if (IS_LAYER_ON(_FN)){ + if (clockwise) { + tap_code(KC_MNXT); + } else { + tap_code(KC_MPRV); + } + } else { // IS_LAYER_ON(_CONTROL) + if (clockwise) { + tap_code(KC_WH_U); + } else { + tap_code(KC_WH_D); + } + } + } + return false; +} + +#ifdef RGB_MATRIX_ENABLE + void keyboard_post_init_user(void){ + rgb_matrix_mode(RGB_MATRIX_CUSTOM_quick17_rgbm_effect); + set_input_mode(false); + } +#else + void keyboard_post_init_user(void){ + rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL); + set_input_mode(false); + } +#endif diff --git a/keyboards/yushakobo/quick17/keymaps/default/readme.md b/keyboards/yushakobo/quick17/keymaps/default/readme.md new file mode 100644 index 0000000000..5a5066ed58 --- /dev/null +++ b/keyboards/yushakobo/quick17/keymaps/default/readme.md @@ -0,0 +1,64 @@ +# The default keymap for quick17 + +## CONTROL(default) Layer +``` + ,-----------------------------------------------. + | Tab | PgUp | Up | PgDn | Home | Ins | + |-------+-------+-------+-------+-------+-------| + | Ctrl | Left | Down | Right | End | Del | + |-------+-------+-------+-------+-------+-------| + | Shift | GUI | Esc | Alt | FN/Spc| EDIT1 | + `-----------------------------------------------' +``` + +## EDIT1 Layer +``` + ,--------------------------------------------------. + | Esc | W | E | R | Y | Bspc | + |-------+-------+-------+-------+---------+--------| + | Ctrl | A | D | F | H | Ctrl+Z | + |-------+-------+-------+-------+---------+--------| + | Shift | X | V | B |EDIT2/Spc| Ctrl+S | + `--------------------------------------------------' +``` + +## EDIT2 Layer +``` + ,-------------------------------------------------. + | Esc | Q | BTN3 | Ins | Enter | Bspc | + |-------+-------+-------+-------+--------+--------| + | Ctrl | [ | ] | PgDn | PgUp | Ctrl+Z | + |-------+-------+-------+-------+--------+--------| + | Shift | FN |RGB_TOG|CONTROL| (NONE) | (NONE) | + `-------------------------------------------------' +``` + +## FN Layer +``` + ,---------------------------------------------------. + | Esc | LANG | (NONE) |RGB_TOG| Media > | Vol+ | + |-------+-------+--------+-------+---------+--------| + | Caps | Numlk | (NONE) |RGB_MOD| Media < | Vol- | + |-------+-------+--------+-------+---------+--------| + | Win | mac | EEP_RST| RESET | CONTROL | Mute | + `---------------------------------------------------' +``` +### difference between mac-Mode and Win-Mode +- In mac Mode, `Ctrl` key will be changed into `command` key. +- `LANG` key will change its behaviour. + +### "LANG" key behaviour + +|LED-sign|Blue|Red|Green| +|---|---|---|---| +|mac Mode|-|かな|英数| +|Win Mode|半角/全角(Alt+`)|-|-| + +## Rotary encoder behaviour + +|On layer...|Clockwise|C-Clockwise| +|---|---|---| +|CONTROL|Scroll Up|Scroll Down| +|EDIT1|Vol+|Vol-| +|EDIT2|[|]| +|FN|Media >|Media <| diff --git a/keyboards/yushakobo/quick17/keymaps/via/keymap.c b/keyboards/yushakobo/quick17/keymaps/via/keymap.c new file mode 100644 index 0000000000..a3873bc1ee --- /dev/null +++ b/keyboards/yushakobo/quick17/keymaps/via/keymap.c @@ -0,0 +1,113 @@ +/* Copyright 2021 yushakobo + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +// Defines the keycodes used by our macros in process_record_user +enum custom_keycodes { + KC_LANG +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_CONTROL] = LAYOUT( + KC_TAB, KC_PGUP,KC_UP, KC_PGDN,KC_HOME,KC_INS, + KC_LCTL,KC_LEFT,KC_DOWN,KC_RGHT,KC_END, KC_DEL, + KC_LSFT,KC_LGUI,KC_ESC, KC_LALT,LT(3,KC_SPC),TO(1) + ), + [_EDIT1] = LAYOUT( + KC_ESC, KC_W, KC_E, KC_R, KC_Y, KC_BSPC, + KC_LCTL,KC_A, KC_D, KC_F, KC_H, LCTL(KC_Z), + KC_LSFT,KC_X, KC_V, KC_B, LT(2,KC_SPC),LCTL(KC_S) + ), + [_EDIT2] = LAYOUT( + KC_ESC, KC_Q, KC_BTN3,KC_INS, KC_ENT, KC_DEL, + KC_LCTL,KC_LBRC,KC_RBRC,KC_PGDN,KC_PGUP,LCTL(KC_Y), + KC_LSFT,TO(3), RGB_TOG,TO(0), _______,KC_NO + ), + [_FN] = LAYOUT( + KC_ESC, KC_LANG,KC_NO, RGB_TOG,KC_MNXT,KC_VOLU, + KC_CAPS,KC_NLCK,KC_NO, RGB_MOD,KC_MPRV,KC_VOLD, + CG_NORM,LCG_SWP,EEP_RST,RESET, TO(0), KC_MUTE + ) +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case KC_LANG: + if (record->event.pressed){ + if (keymap_config.swap_lctl_lgui == false){ + tap_code16(LALT(KC_GRV)); + } else { + if(input_mode()){ + register_code(KC_LANG2); + set_input_mode(false); + } else { + register_code(KC_LANG1); + set_input_mode(true); + } + } + } else { + unregister_code(KC_LANG1); + unregister_code(KC_LANG2); + } + break; + default: + break; + } + return true; +} + +bool encoder_update_user(uint8_t index, bool clockwise){ + if (index == 0) { + if (IS_LAYER_ON(_EDIT2)){ + if (clockwise) { + tap_code(KC_LBRC); + } else { + tap_code(KC_RBRC); + } + } else if (IS_LAYER_ON(_EDIT1)){ + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } else if (IS_LAYER_ON(_FN)){ + if (clockwise) { + tap_code(KC_MNXT); + } else { + tap_code(KC_MPRV); + } + } else { // IS_LAYER_ON(_CONTROL) + if (clockwise) { + tap_code(KC_WH_U); + } else { + tap_code(KC_WH_D); + } + } + } + return false; +} + +#ifdef RGB_MATRIX_ENABLE + void keyboard_post_init_user(void){ + rgb_matrix_mode(RGB_MATRIX_CUSTOM_quick17_rgbm_effect); + set_input_mode(false); + } +#else + void keyboard_post_init_user(void){ + rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL); + set_input_mode(false); + } +#endif diff --git a/keyboards/yushakobo/quick17/keymaps/via/readme.md b/keyboards/yushakobo/quick17/keymaps/via/readme.md new file mode 100644 index 0000000000..da0923539d --- /dev/null +++ b/keyboards/yushakobo/quick17/keymaps/via/readme.md @@ -0,0 +1,62 @@ +# The via keymap for quick17 + +## CONTROL(default) Layer +``` + ,-----------------------------------------------. + | Tab | PgUp | Up | PgDn | Home | Ins | + |-------+-------+-------+-------+-------+-------| + | Ctrl | Left | Down | Right | End | Del | + |-------+-------+-------+-------+-------+-------| + | Shift | GUI | Esc | Alt | FN/Spc| EDIT1 | + `-----------------------------------------------' +``` + +## EDIT1 Layer +``` + ,--------------------------------------------------. + | Esc | W | E | R | Y | Bspc | + |-------+-------+-------+-------+---------+--------| + | Ctrl | A | D | F | H | Ctrl+Z | + |-------+-------+-------+-------+---------+--------| + | Shift | X | V | B |EDIT2/Spc| Ctrl+S | + `--------------------------------------------------' +``` + +## EDIT2 Layer +``` + ,-------------------------------------------------. + | Esc | Q | BTN3 | Ins | Enter | Bspc | + |-------+-------+-------+-------+--------+--------| + | Ctrl | [ | ] | PgDn | PgUp | Ctrl+Z | + |-------+-------+-------+-------+--------+--------| + | Shift | FN |RGB_TOG|CONTROL| (NONE) | (NONE) | + `-------------------------------------------------' +``` + +## FN Layer +``` + ,---------------------------------------------------. + | Esc | LANG | (NONE) |RGB_TOG| Media > | Vol+ | + |-------+-------+--------+-------+---------+--------| + | Caps | Numlk | (NONE) |RGB_MOD| Media < | Vol- | + |-------+-------+--------+-------+---------+--------| + | Win | mac | EEP_RST| RESET | CONTROL | Mute | + `---------------------------------------------------' +``` +### difference between mac-Mode and Win-Mode +- In mac Mode, `Ctrl` key will be changed into `command` key. +- `LANG` key will change its behaviour. + +### "LANG" key behaviour + +- mac Mode: cycle around "かな" and "英数" +- Win Mode: key combinations of Alt and ` + +## Rotary encoder behaviour + +|On layer...|Clockwise|C-Clockwise| +|---|---|---| +|CONTROL|Scroll Up|Scroll Down| +|EDIT1|Vol+|Vol-| +|EDIT2|[|]| +|FN|Media >|Media <| diff --git a/keyboards/yushakobo/quick17/keymaps/via/rules.mk b/keyboards/yushakobo/quick17/keymaps/via/rules.mk new file mode 100644 index 0000000000..b5502db7c4 --- /dev/null +++ b/keyboards/yushakobo/quick17/keymaps/via/rules.mk @@ -0,0 +1,3 @@ +VIA_ENABLE = yes +RGBLIGHT_ENABLE = yes +RGB_MATRIX_ENABLE = no \ No newline at end of file diff --git a/keyboards/yushakobo/quick17/quick17.c b/keyboards/yushakobo/quick17/quick17.c new file mode 100644 index 0000000000..ed9fe97097 --- /dev/null +++ b/keyboards/yushakobo/quick17/quick17.c @@ -0,0 +1,37 @@ +/* Copyright 2021 yushakobo + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "quick17.h" + +#ifdef RGB_MATRIX_ENABLE +led_config_t g_led_config = { + { + {12, 13, 14, 15, 16, 17}, + {0, 1, 11, 10, 9, 8}, + {2, 3, 4, 5, 6, 7} + }, + { + {0,32}, {44,32}, {0,64}, {44,64}, {89,64}, {134,64}, + {179,64},{224,64},{224,32},{179,32},{134,32},{89,32}, + {0,0}, {44,0}, {89,0}, {134,0}, {179,0}, {224,0} + }, + { + 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4 + } +}; +#endif diff --git a/keyboards/yushakobo/quick17/quick17.h b/keyboards/yushakobo/quick17/quick17.h new file mode 100644 index 0000000000..566df71069 --- /dev/null +++ b/keyboards/yushakobo/quick17/quick17.h @@ -0,0 +1,38 @@ +/* Copyright 2021 yushakobo + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + k00, k01, k02, k03, k04, k05, \ + k10, k11, k12, k13, k14, k15, \ + k20, k21, k22, k23, k24, k25 \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05 }, \ + { k10, k11, k12, k13, k14, k15 }, \ + { k20, k21, k22, k23, k24, k25 } \ +} diff --git a/keyboards/yushakobo/quick17/quick17_prefs.c b/keyboards/yushakobo/quick17/quick17_prefs.c new file mode 100644 index 0000000000..1a546f4e35 --- /dev/null +++ b/keyboards/yushakobo/quick17/quick17_prefs.c @@ -0,0 +1,29 @@ +/* Copyright 2021 yushakobo + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +bool _INPUT_JP; + +void set_input_mode(bool _mode_jaen){ + _INPUT_JP = _mode_jaen; + // japanese -> true + // english -> false +} + +bool input_mode(void){ + return _INPUT_JP; +} diff --git a/keyboards/yushakobo/quick17/quick17_prefs.h b/keyboards/yushakobo/quick17/quick17_prefs.h new file mode 100644 index 0000000000..4d81d163b9 --- /dev/null +++ b/keyboards/yushakobo/quick17/quick17_prefs.h @@ -0,0 +1,28 @@ +/* Copyright 2021 yushakobo + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +enum layer_names { + _CONTROL, + _EDIT1, + _EDIT2, + _FN +}; + +#define _HSV(H, S, V) (HSV){ .h = H, .s = S, .v = V } +#define _RGB(rgb) rgb.r, rgb.g, rgb.b + +bool input_mode(void); +void set_input_mode(bool _mode_jaen); diff --git a/keyboards/yushakobo/quick17/readme.md b/keyboards/yushakobo/quick17/readme.md new file mode 100644 index 0000000000..672cee3319 --- /dev/null +++ b/keyboards/yushakobo/quick17/readme.md @@ -0,0 +1,19 @@ +# quick17 + +![quick17](https://i.imgur.com/8SkWq0m.jpeg) + +A simple macropad for the beginners + +* Keyboard Maintainer: [yushakobo](https://github.com/yushakobo) +* Hardware Supported: Quick17 PCBs, Pro Micro (ATmega32u4) +* Hardware Availability: [yushakobo shop](https://shop.yushakobo.jp/products/quick17) + +Make example for this keyboard (after setting up your build environment): + + make quick17:default + +Flashing example for this keyboard: + + make quick17:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/yushakobo/quick17/rgb_matrix_kb.inc b/keyboards/yushakobo/quick17/rgb_matrix_kb.inc new file mode 100644 index 0000000000..87738389b7 --- /dev/null +++ b/keyboards/yushakobo/quick17/rgb_matrix_kb.inc @@ -0,0 +1,117 @@ +RGB_MATRIX_EFFECT(quick17_rgbm_effect) + +#ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS + +#include "quick17_prefs.h" + +#define LED_LAYOUT(\ + L00, L01, L02, L03, L04, L05, \ + L10, L11, L12, L13, L14, L15, \ + L20, L21, L22, L23, L24, L25 \ +) {\ + L10, L11, L20, L21, L22, L23,\ + L24, L25, L15, L14, L13, L12,\ + L00, L01, L02, L03, L04, L05\ +} + +enum lighting_types { + BOUT, + _____, + INDC1, + INDC2, + INDC3, + INDC4, + INDC5, + JA_EN, + CAPSL, + NUM_L +}; + +const uint8_t rgb_keymaps [][DRIVER_LED_TOTAL] = { + [_CONTROL] = LED_LAYOUT( + _____, INDC2, INDC1, INDC2, INDC3, INDC4, + _____, INDC1, INDC1, INDC1, INDC3, INDC4, + _____, _____, _____, _____, INDC5, INDC5 + ), + [_EDIT1] = LED_LAYOUT( + _____, _____, _____, _____, _____, INDC4, + _____, _____, _____, _____, _____, INDC1, + _____, _____, _____, _____, INDC5, INDC1 + ), + [_EDIT2] = LED_LAYOUT( + _____, _____, _____, _____, _____, INDC4, + _____, _____, _____, _____, _____, INDC1, + _____, INDC5, INDC3, INDC5, INDC5, BOUT + ), + [_FN] = LED_LAYOUT( + _____, JA_EN, BOUT, INDC3, INDC4, INDC4, + CAPSL, NUM_L, BOUT, INDC3, INDC4, INDC4, + INDC2, INDC2, INDC1, INDC1, INDC5, INDC4 + ) +}; + +static void led_color_set(uint8_t index, uint8_t color_patterns) { + HSV hsv = rgb_matrix_config.hsv; // 'quantum/rgblight_list.h' + RGB rgb_white = hsv_to_rgb(_HSV( 0, 0, hsv.v)); // HSV_WHITE + RGB rgb_indc1 = hsv_to_rgb(_HSV(128, 255, hsv.v)); // HSV_TEAL + RGB rgb_indc2 = hsv_to_rgb(_HSV(191, 255, hsv.v)); // HSV_PURPLE + RGB rgb_indc3 = hsv_to_rgb(_HSV( 64, 255, hsv.v)); // HSV_CHARTREUSE + RGB rgb_indc4 = hsv_to_rgb(_HSV(106, 255, hsv.v)); // HSV_SPRINGGREEN + RGB rgb_indc5 = hsv_to_rgb(_HSV(234, 128, hsv.v)); // HSV_PINK + RGB rgb_indc6 = hsv_to_rgb(_HSV(213, 255, hsv.v)); // HSV_MAGENTA + RGB rgb_indc_ja = hsv_to_rgb(_HSV( 0, 255, hsv.v)); // HSV_RED + RGB rgb_indc_en = hsv_to_rgb(_HSV( 85, 255, hsv.v)); // HSV_GREEN + RGB rgb_indc_win = hsv_to_rgb(_HSV(170, 255, hsv.v)); // HSV_BLUE + switch(color_patterns){ + case BOUT: rgb_matrix_set_color(index, RGB_BLACK); break; + case _____: rgb_matrix_set_color(index, _RGB(rgb_white)); break; + case INDC1: rgb_matrix_set_color(index, _RGB(rgb_indc1)); break; + case INDC2: rgb_matrix_set_color(index, _RGB(rgb_indc2)); break; + case INDC3: rgb_matrix_set_color(index, _RGB(rgb_indc3)); break; + case INDC4: rgb_matrix_set_color(index, _RGB(rgb_indc4)); break; + case INDC5: rgb_matrix_set_color(index, _RGB(rgb_indc5)); break; + case JA_EN: + if (keymap_config.swap_lctl_lgui == false) { + rgb_matrix_set_color(index, _RGB(rgb_indc_win)); + } else { + if (input_mode()){ + rgb_matrix_set_color(index, _RGB(rgb_indc_ja)); + } else { + rgb_matrix_set_color(index, _RGB(rgb_indc_en)); + } + } + break; + case CAPSL: + if (host_keyboard_led_state().caps_lock) { + rgb_matrix_set_color(index, _RGB(rgb_indc6)); + } else { + rgb_matrix_set_color(index, _RGB(rgb_white)); + } + break; + case NUM_L: + if (host_keyboard_led_state().num_lock) { + rgb_matrix_set_color(index, _RGB(rgb_indc6)); + } else { + rgb_matrix_set_color(index, _RGB(rgb_white)); + } + break; + } +} + +static bool quick17_rgbm_effect (effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + for (uint8_t i = led_min; i < led_max; i++) { + if (IS_LAYER_ON(_EDIT2)){ + led_color_set(i, rgb_keymaps[_EDIT2][i]); + } else if (IS_LAYER_ON(_EDIT1)){ + led_color_set(i, rgb_keymaps[_EDIT1][i]); + } else if (IS_LAYER_ON(_FN)){ + led_color_set(i, rgb_keymaps[_FN][i]); + } else { // IS_LAYER_ON(_CONTROL) + led_color_set(i, rgb_keymaps[_CONTROL][i]); + } + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif diff --git a/keyboards/yushakobo/quick17/rules.mk b/keyboards/yushakobo/quick17/rules.mk new file mode 100644 index 0000000000..fc036091a0 --- /dev/null +++ b/keyboards/yushakobo/quick17/rules.mk @@ -0,0 +1,28 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = caterina + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +ENCODER_ENABLE = yes + +RGB_MATRIX_ENABLE = yes +RGB_MATRIX_DRIVER = WS2812 +RGB_MATRIX_CUSTOM_KB = yes + +SRC += quick17_prefs.c From f61f79b7cd1cb8edad8d55577c834a9470405b4c Mon Sep 17 00:00:00 2001 From: Ramya Challa Date: Sat, 18 Sep 2021 12:47:26 -0700 Subject: [PATCH 034/595] [Keyboard] Add Gentleman65 (#12971) Co-authored-by: Drashna Jaelre --- keyboards/gentleman65/config.h | 59 +++++++++++++++++++ keyboards/gentleman65/gentleman65.c | 30 ++++++++++ keyboards/gentleman65/gentleman65.h | 33 +++++++++++ keyboards/gentleman65/info.json | 10 ++++ .../gentleman65/keymaps/default/keymap.c | 36 +++++++++++ keyboards/gentleman65/keymaps/via/keymap.c | 53 +++++++++++++++++ keyboards/gentleman65/keymaps/via/rules.mk | 2 + keyboards/gentleman65/readme.md | 24 ++++++++ keyboards/gentleman65/rules.mk | 24 ++++++++ 9 files changed, 271 insertions(+) create mode 100644 keyboards/gentleman65/config.h create mode 100644 keyboards/gentleman65/gentleman65.c create mode 100644 keyboards/gentleman65/gentleman65.h create mode 100644 keyboards/gentleman65/info.json create mode 100644 keyboards/gentleman65/keymaps/default/keymap.c create mode 100644 keyboards/gentleman65/keymaps/via/keymap.c create mode 100644 keyboards/gentleman65/keymaps/via/rules.mk create mode 100644 keyboards/gentleman65/readme.md create mode 100644 keyboards/gentleman65/rules.mk diff --git a/keyboards/gentleman65/config.h b/keyboards/gentleman65/config.h new file mode 100644 index 0000000000..34cd4d4899 --- /dev/null +++ b/keyboards/gentleman65/config.h @@ -0,0 +1,59 @@ +/* +Copyright 2021 Omar Afzal + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x00FA +#define PRODUCT_ID 0x2020 +#define DEVICE_VER 0x0001 +#define MANUFACTURER JJ48_24 & Omar Afzal +#define PRODUCT Gentleman 65 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 16 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { D3, D2, D1, F7, F1 } +#define MATRIX_COL_PINS { D4, D6, D7, B4, B5, B6, C6, D5, C7, F0, B2, B1, B3, B0, B7, D0 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +#define RGB_DI_PIN F4 +#define RGBLED_NUM 14 +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE + +#define ENCODERS_PAD_A { F6 } +#define ENCODERS_PAD_B { F5 } +#define ENCODER_RESOLUTION 3 + +#define DRIVER_LED_TOTAL 14 \ No newline at end of file diff --git a/keyboards/gentleman65/gentleman65.c b/keyboards/gentleman65/gentleman65.c new file mode 100644 index 0000000000..9e9baa011e --- /dev/null +++ b/keyboards/gentleman65/gentleman65.c @@ -0,0 +1,30 @@ + +/* Copyright 2021 Omar Afzal + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "gentleman65.h" + +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + if (index == 0) { /* First encoder */ + if (clockwise) { + tap_code_delay(KC_AUDIO_VOL_UP, 10); + } else { + tap_code_delay(KC_AUDIO_VOL_DOWN, 10); + } + } + return true; +} \ No newline at end of file diff --git a/keyboards/gentleman65/gentleman65.h b/keyboards/gentleman65/gentleman65.h new file mode 100644 index 0000000000..c313e41102 --- /dev/null +++ b/keyboards/gentleman65/gentleman65.h @@ -0,0 +1,33 @@ +/* Copyright 2021 Omar Afzal + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +#define LAYOUT_all( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, \ + K100, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, \ + K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, \ + K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K314, K315, \ + K400, K401, K403, K406, K410, K412, K413, K414, K415 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ + { K100, KC_NO, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115 }, \ + { K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO, K215 }, \ + { K300, KC_NO, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, K314, K315 }, \ + { K400, K401, KC_NO, K403, KC_NO, KC_NO, K406, KC_NO, KC_NO, KC_NO, K410, KC_NO, K412, K413, K414, K415 } \ +} diff --git a/keyboards/gentleman65/info.json b/keyboards/gentleman65/info.json new file mode 100644 index 0000000000..d42b3ff6db --- /dev/null +++ b/keyboards/gentleman65/info.json @@ -0,0 +1,10 @@ +{ + "name": "The Gentleman 65", + "url": "https://jkeys.design/products/gentleman-65", + "maintainer": "0marA", + "layouts": { + "LAYOUT_all": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "w":1.5}, {"x":11.5, "y":4, "w":1.5}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] + } + } +} \ No newline at end of file diff --git a/keyboards/gentleman65/keymaps/default/keymap.c b/keyboards/gentleman65/keymaps/default/keymap.c new file mode 100644 index 0000000000..6a4f8a3b7b --- /dev/null +++ b/keyboards/gentleman65/keymaps/default/keymap.c @@ -0,0 +1,36 @@ +/* Copyright 2021 Omar Afzal + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_END, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT_all( + KC_TILD, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, RGB_TOG, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_MOD, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAI, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_HUI, RGB_VAD, + RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_SAD, RGB_HUD, RGB_SAI + ), + +}; diff --git a/keyboards/gentleman65/keymaps/via/keymap.c b/keyboards/gentleman65/keymaps/via/keymap.c new file mode 100644 index 0000000000..0c76935c3f --- /dev/null +++ b/keyboards/gentleman65/keymaps/via/keymap.c @@ -0,0 +1,53 @@ +/* Copyright 2021 Omar Afzal + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_END, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT_all( + KC_TILD, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, RGB_TOG, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_MOD, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAI, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_HUI, RGB_VAD, + RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_SAD, RGB_HUD, RGB_SAI + ), + + [2] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [3] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + +}; + diff --git a/keyboards/gentleman65/keymaps/via/rules.mk b/keyboards/gentleman65/keymaps/via/rules.mk new file mode 100644 index 0000000000..43061db1dd --- /dev/null +++ b/keyboards/gentleman65/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes \ No newline at end of file diff --git a/keyboards/gentleman65/readme.md b/keyboards/gentleman65/readme.md new file mode 100644 index 0000000000..b2b4e017ce --- /dev/null +++ b/keyboards/gentleman65/readme.md @@ -0,0 +1,24 @@ +# Gentleman65 + +![Render](https://i.imgur.com/uNdJqBuh.jpg) + +The Gentleman 65 combines the sleek look of natural wood, with the fun of frosted acrylic to produce a truly unique look that differs from existing boards on the market. The board consists of 2 3mm frosted acrylic layers, topped by 2 layers of 6mm of wood, a frosted acrylic wedge, and 2 feet that give the board an angle of 7°. The board is unique in its inclusion of a top mounting system, something rarely seen on the laser cut board. + + +* Keyboard Maintainer: [Omar Afzal](https://github.com/0marA) +* Hardware Supported: Gentleman 65 PCB for Gentleman65 +* Hardware Availability: [Jkeys.Design](https://jkeys.design/) + +Getting the board into bootloader mode: + +To flash firmware onto this board, you'll need to bring the PCB into bootloader mode. To enter bootloader mode, press the reset button on the back of the PCB twice. The reset button is located in the bottom center near the spacebar switch footprint. + +Make example for this keyboard (after setting up your build environment): + + make gentleman65:default + +Flashing example for this keyboard: + + make gentleman65:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). \ No newline at end of file diff --git a/keyboards/gentleman65/rules.mk b/keyboards/gentleman65/rules.mk new file mode 100644 index 0000000000..0f86307a97 --- /dev/null +++ b/keyboards/gentleman65/rules.mk @@ -0,0 +1,24 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +RGB_MATRIX_ENABLE = no +RGB_MATRIX_DRIVER = WS2812 +ENCODER_ENABLE = yes \ No newline at end of file From bf613eb9dbeb05b7456019275cd3a1e6dddd62ee Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Sat, 18 Sep 2021 17:04:20 -0700 Subject: [PATCH 035/595] [Keyboard] Fix BT rules for dosa40rgb (#14497) --- keyboards/dtisaac/dosa40rgb/rules.mk | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/keyboards/dtisaac/dosa40rgb/rules.mk b/keyboards/dtisaac/dosa40rgb/rules.mk index c3ad783fc9..8924c0a41c 100644 --- a/keyboards/dtisaac/dosa40rgb/rules.mk +++ b/keyboards/dtisaac/dosa40rgb/rules.mk @@ -20,7 +20,8 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow BLUETOOTH_ENABLE = no # Enable Bluetooth AUDIO_ENABLE = no # Audio output -BLUETOOTH = AdafruitBLE # Enable Bluetooth +BLUETOOTH_ENABLE = yes # Enable Bluetooth +BLUETOOTH_DRIVER = AdafruitBLE RGB_MATRIX_ENABLE = yes RGB_MATRIX_DRIVER = WS2812 From ef5c6ea096033423c9b9e141c1fc94dcc41d84fa Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Sat, 18 Sep 2021 20:10:32 -0700 Subject: [PATCH 036/595] [Keyboard] Use old custom matrix for Drop Planck+Preonic (#14488) Co-authored-by: Ryan Co-authored-by: Jack Humbert --- keyboards/planck/planck.h | 43 ++- keyboards/planck/rev6_drop/chconf.h | 29 ++ keyboards/planck/rev6_drop/config.h | 128 +++++++++ keyboards/planck/rev6_drop/halconf.h | 22 ++ keyboards/planck/rev6_drop/info.json | 262 ++++++++++++++++++ keyboards/planck/rev6_drop/matrix.c | 166 ++++++++++++ keyboards/planck/rev6_drop/mcuconf.h | 39 +++ keyboards/planck/rev6_drop/readme.md | 13 + keyboards/planck/rev6_drop/rev6_drop.c | 44 +++ keyboards/planck/rev6_drop/rev6_drop.h | 108 ++++++++ keyboards/planck/rev6_drop/rules.mk | 33 +++ keyboards/preonic/preonic.h | 35 ++- keyboards/preonic/rev3_drop/chconf.h | 29 ++ keyboards/preonic/rev3_drop/config.h | 110 ++++++++ keyboards/preonic/rev3_drop/halconf.h | 22 ++ keyboards/preonic/rev3_drop/info.json | 342 ++++++++++++++++++++++++ keyboards/preonic/rev3_drop/matrix.c | 168 ++++++++++++ keyboards/preonic/rev3_drop/mcuconf.h | 39 +++ keyboards/preonic/rev3_drop/rev3_drop.c | 61 +++++ keyboards/preonic/rev3_drop/rev3_drop.h | 115 ++++++++ keyboards/preonic/rev3_drop/rules.mk | 33 +++ 21 files changed, 1817 insertions(+), 24 deletions(-) create mode 100644 keyboards/planck/rev6_drop/chconf.h create mode 100644 keyboards/planck/rev6_drop/config.h create mode 100644 keyboards/planck/rev6_drop/halconf.h create mode 100644 keyboards/planck/rev6_drop/info.json create mode 100644 keyboards/planck/rev6_drop/matrix.c create mode 100644 keyboards/planck/rev6_drop/mcuconf.h create mode 100644 keyboards/planck/rev6_drop/readme.md create mode 100644 keyboards/planck/rev6_drop/rev6_drop.c create mode 100644 keyboards/planck/rev6_drop/rev6_drop.h create mode 100644 keyboards/planck/rev6_drop/rules.mk create mode 100644 keyboards/preonic/rev3_drop/chconf.h create mode 100644 keyboards/preonic/rev3_drop/config.h create mode 100644 keyboards/preonic/rev3_drop/halconf.h create mode 100644 keyboards/preonic/rev3_drop/info.json create mode 100644 keyboards/preonic/rev3_drop/matrix.c create mode 100644 keyboards/preonic/rev3_drop/mcuconf.h create mode 100644 keyboards/preonic/rev3_drop/rev3_drop.c create mode 100644 keyboards/preonic/rev3_drop/rev3_drop.h create mode 100644 keyboards/preonic/rev3_drop/rules.mk diff --git a/keyboards/planck/planck.h b/keyboards/planck/planck.h index 31e3ec9158..4b04dfec51 100644 --- a/keyboards/planck/planck.h +++ b/keyboards/planck/planck.h @@ -1,26 +1,41 @@ -#ifndef PLANCK_H -#define PLANCK_H +/* Copyright 2018 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once #include "quantum.h" #if defined(KEYBOARD_planck_ez) - #include "ez.h" +# include "ez.h" #elif defined(KEYBOARD_planck_light) - #include "light.h" +# include "light.h" #elif defined(KEYBOARD_planck_thk) - #include "thk.h" +# include "thk.h" #elif defined(KEYBOARD_planck_rev1) - #include "rev1.h" +# include "rev1.h" #elif defined(KEYBOARD_planck_rev2) - #include "rev2.h" +# include "rev2.h" #elif defined(KEYBOARD_planck_rev3) - #include "rev3.h" +# include "rev3.h" #elif defined(KEYBOARD_planck_rev4) - #include "rev4.h" +# include "rev4.h" #elif defined(KEYBOARD_planck_rev5) - #include "rev5.h" +# include "rev5.h" #elif defined(KEYBOARD_planck_rev6) - #include "rev6.h" -#endif // Planck revisions - -#endif +# include "rev6.h" +#elif defined(KEYBOARD_planck_rev6_drop) +# include "rev6_drop.h" +#endif // Planck revisions diff --git a/keyboards/planck/rev6_drop/chconf.h b/keyboards/planck/rev6_drop/chconf.h new file mode 100644 index 0000000000..e1243f23ec --- /dev/null +++ b/keyboards/planck/rev6_drop/chconf.h @@ -0,0 +1,29 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +/* + * This file was auto-generated by: + * `qmk chibios-confmigrate -i keyboards/planck/rev6/chconf.h -r platforms/chibios/QMK_PROTON_C/configs/chconf.h` + */ + +#pragma once + +#define CH_CFG_ST_RESOLUTION 16 + +#define CH_CFG_ST_FREQUENCY 10000 + +#include_next + diff --git a/keyboards/planck/rev6_drop/config.h b/keyboards/planck/rev6_drop/config.h new file mode 100644 index 0000000000..c1baa34b72 --- /dev/null +++ b/keyboards/planck/rev6_drop/config.h @@ -0,0 +1,128 @@ +/* + * Copyright 2018 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +/* USB Device descriptor parameter */ +#define PRODUCT_ID 0xA4F9 +#define DEVICE_VER 0x0006 +#undef MANUFACTURER +#define MANUFACTURER Drop + +#undef MATRIX_ROWS +#undef MATRIX_COLS +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 6 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +/* Note: These are not used for arm boards. They're here purely as documentation. */ +#undef MATRIX_ROW_PINS +#undef MATRIX_COL_PINS + +#define MATRIX_ROW_PINS \ + { A10, A9, A8, B15, C13, C14, C15, A2 } +#define MATRIX_COL_PINS \ + { B11, B10, B2, B1, A7, B0 } + +#define UNUSED_PINS + +#define ENCODERS_PAD_A \ + { B12 } +#define ENCODERS_PAD_B \ + { B13 } + +#define DIP_SWITCH_PINS \ + { B14, A15, A0, B9 } + +#define MUSIC_MAP +#undef AUDIO_VOICES +#undef AUDIO_PIN +#define AUDIO_PIN A5 +#define AUDIO_PIN_ALT A4 +#define AUDIO_PIN_ALT_AS_NEGATIVE + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +// #define DEBOUNCE 6 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +//#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +//#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * WS2812 Underglow Matrix options + */ +#define RGB_DI_PIN A1 +#define RGBLED_NUM 9 +#define DRIVER_LED_TOTAL RGBLED_NUM + +#define WS2812_PWM_DRIVER PWMD2 +#define WS2812_PWM_CHANNEL 2 +#define WS2812_PWM_PAL_MODE 1 +#define WS2812_DMA_STREAM STM32_DMA1_STREAM2 +#define WS2812_DMA_CHANNEL 2 + +#define RGB_DISABLE_WHEN_USB_SUSPENDED diff --git a/keyboards/planck/rev6_drop/halconf.h b/keyboards/planck/rev6_drop/halconf.h new file mode 100644 index 0000000000..48b76d2f44 --- /dev/null +++ b/keyboards/planck/rev6_drop/halconf.h @@ -0,0 +1,22 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#define HAL_USE_PWM TRUE +#define HAL_USE_GPT TRUE +#define HAL_USE_DAC TRUE + +#include_next diff --git a/keyboards/planck/rev6_drop/info.json b/keyboards/planck/rev6_drop/info.json new file mode 100644 index 0000000000..114a971294 --- /dev/null +++ b/keyboards/planck/rev6_drop/info.json @@ -0,0 +1,262 @@ +{ + "keyboard_name": "Planck rev 6", + "url": "https://olkb.com/planck", + "maintainer": "jackhumbert", + "layouts": { + "LAYOUT_ortho_4x12": { + "layout": [ + { "x": 0, "y": 0 }, + { "x": 1, "y": 0 }, + { "x": 2, "y": 0 }, + { "x": 3, "y": 0 }, + { "x": 4, "y": 0 }, + { "x": 5, "y": 0 }, + { "x": 6, "y": 0 }, + { "x": 7, "y": 0 }, + { "x": 8, "y": 0 }, + { "x": 9, "y": 0 }, + { "x": 10, "y": 0 }, + { "x": 11, "y": 0 }, + { "x": 0, "y": 1 }, + { "x": 1, "y": 1 }, + { "x": 2, "y": 1 }, + { "x": 3, "y": 1 }, + { "x": 4, "y": 1 }, + { "x": 5, "y": 1 }, + { "x": 6, "y": 1 }, + { "x": 7, "y": 1 }, + { "x": 8, "y": 1 }, + { "x": 9, "y": 1 }, + { "x": 10, "y": 1 }, + { "x": 11, "y": 1 }, + { "x": 0, "y": 2 }, + { "x": 1, "y": 2 }, + { "x": 2, "y": 2 }, + { "x": 3, "y": 2 }, + { "x": 4, "y": 2 }, + { "x": 5, "y": 2 }, + { "x": 6, "y": 2 }, + { "x": 7, "y": 2 }, + { "x": 8, "y": 2 }, + { "x": 9, "y": 2 }, + { "x": 10, "y": 2 }, + { "x": 11, "y": 2 }, + { "x": 0, "y": 3 }, + { "x": 1, "y": 3 }, + { "x": 2, "y": 3 }, + { "x": 3, "y": 3 }, + { "x": 4, "y": 3 }, + { "x": 5, "y": 3 }, + { "x": 6, "y": 3 }, + { "x": 7, "y": 3 }, + { "x": 8, "y": 3 }, + { "x": 9, "y": 3 }, + { "x": 10, "y": 3 }, + { "x": 11, "y": 3 } + ] + }, + "LAYOUT_planck_1x2uC": { + "layout": [ + { "x": 0, "y": 0 }, + { "x": 1, "y": 0 }, + { "x": 2, "y": 0 }, + { "x": 3, "y": 0 }, + { "x": 4, "y": 0 }, + { "x": 5, "y": 0 }, + { "x": 6, "y": 0 }, + { "x": 7, "y": 0 }, + { "x": 8, "y": 0 }, + { "x": 9, "y": 0 }, + { "x": 10, "y": 0 }, + { "x": 11, "y": 0 }, + { "x": 0, "y": 1 }, + { "x": 1, "y": 1 }, + { "x": 2, "y": 1 }, + { "x": 3, "y": 1 }, + { "x": 4, "y": 1 }, + { "x": 5, "y": 1 }, + { "x": 6, "y": 1 }, + { "x": 7, "y": 1 }, + { "x": 8, "y": 1 }, + { "x": 9, "y": 1 }, + { "x": 10, "y": 1 }, + { "x": 11, "y": 1 }, + { "x": 0, "y": 2 }, + { "x": 1, "y": 2 }, + { "x": 2, "y": 2 }, + { "x": 3, "y": 2 }, + { "x": 4, "y": 2 }, + { "x": 5, "y": 2 }, + { "x": 6, "y": 2 }, + { "x": 7, "y": 2 }, + { "x": 8, "y": 2 }, + { "x": 9, "y": 2 }, + { "x": 10, "y": 2 }, + { "x": 11, "y": 2 }, + { "x": 0, "y": 3 }, + { "x": 1, "y": 3 }, + { "x": 2, "y": 3 }, + { "x": 3, "y": 3 }, + { "x": 4, "y": 3 }, + { "x": 5, "y": 3, "w": 2 }, + { "x": 7, "y": 3 }, + { "x": 8, "y": 3 }, + { "x": 9, "y": 3 }, + { "x": 10, "y": 3 }, + { "x": 11, "y": 3 } + ] + }, + "LAYOUT_planck_1x2uL": { + "layout": [ + { "x": 0, "y": 0 }, + { "x": 1, "y": 0 }, + { "x": 2, "y": 0 }, + { "x": 3, "y": 0 }, + { "x": 4, "y": 0 }, + { "x": 5, "y": 0 }, + { "x": 6, "y": 0 }, + { "x": 7, "y": 0 }, + { "x": 8, "y": 0 }, + { "x": 9, "y": 0 }, + { "x": 10, "y": 0 }, + { "x": 11, "y": 0 }, + { "x": 0, "y": 1 }, + { "x": 1, "y": 1 }, + { "x": 2, "y": 1 }, + { "x": 3, "y": 1 }, + { "x": 4, "y": 1 }, + { "x": 5, "y": 1 }, + { "x": 6, "y": 1 }, + { "x": 7, "y": 1 }, + { "x": 8, "y": 1 }, + { "x": 9, "y": 1 }, + { "x": 10, "y": 1 }, + { "x": 11, "y": 1 }, + { "x": 0, "y": 2 }, + { "x": 1, "y": 2 }, + { "x": 2, "y": 2 }, + { "x": 3, "y": 2 }, + { "x": 4, "y": 2 }, + { "x": 5, "y": 2 }, + { "x": 6, "y": 2 }, + { "x": 7, "y": 2 }, + { "x": 8, "y": 2 }, + { "x": 9, "y": 2 }, + { "x": 10, "y": 2 }, + { "x": 11, "y": 2 }, + { "x": 0, "y": 3 }, + { "x": 1, "y": 3 }, + { "x": 2, "y": 3 }, + { "x": 3, "y": 3 }, + { "x": 4, "y": 3, "w": 2 }, + { "x": 6, "y": 3 }, + { "x": 7, "y": 3 }, + { "x": 8, "y": 3 }, + { "x": 9, "y": 3 }, + { "x": 10, "y": 3 }, + { "x": 11, "y": 3 } + ] + }, + "LAYOUT_planck_1x2uR": { + "layout": [ + { "x": 0, "y": 0 }, + { "x": 1, "y": 0 }, + { "x": 2, "y": 0 }, + { "x": 3, "y": 0 }, + { "x": 4, "y": 0 }, + { "x": 5, "y": 0 }, + { "x": 6, "y": 0 }, + { "x": 7, "y": 0 }, + { "x": 8, "y": 0 }, + { "x": 9, "y": 0 }, + { "x": 10, "y": 0 }, + { "x": 11, "y": 0 }, + { "x": 0, "y": 1 }, + { "x": 1, "y": 1 }, + { "x": 2, "y": 1 }, + { "x": 3, "y": 1 }, + { "x": 4, "y": 1 }, + { "x": 5, "y": 1 }, + { "x": 6, "y": 1 }, + { "x": 7, "y": 1 }, + { "x": 8, "y": 1 }, + { "x": 9, "y": 1 }, + { "x": 10, "y": 1 }, + { "x": 11, "y": 1 }, + { "x": 0, "y": 2 }, + { "x": 1, "y": 2 }, + { "x": 2, "y": 2 }, + { "x": 3, "y": 2 }, + { "x": 4, "y": 2 }, + { "x": 5, "y": 2 }, + { "x": 6, "y": 2 }, + { "x": 7, "y": 2 }, + { "x": 8, "y": 2 }, + { "x": 9, "y": 2 }, + { "x": 10, "y": 2 }, + { "x": 11, "y": 2 }, + { "x": 0, "y": 3 }, + { "x": 1, "y": 3 }, + { "x": 2, "y": 3 }, + { "x": 3, "y": 3 }, + { "x": 4, "y": 3 }, + { "x": 5, "y": 3 }, + { "x": 6, "y": 3, "w": 2 }, + { "x": 8, "y": 3 }, + { "x": 9, "y": 3 }, + { "x": 10, "y": 3 }, + { "x": 11, "y": 3 } + ] + }, + "LAYOUT_planck_2x2u": { + "layout": [ + { "x": 0, "y": 0 }, + { "x": 1, "y": 0 }, + { "x": 2, "y": 0 }, + { "x": 3, "y": 0 }, + { "x": 4, "y": 0 }, + { "x": 5, "y": 0 }, + { "x": 6, "y": 0 }, + { "x": 7, "y": 0 }, + { "x": 8, "y": 0 }, + { "x": 9, "y": 0 }, + { "x": 10, "y": 0 }, + { "x": 11, "y": 0 }, + { "x": 0, "y": 1 }, + { "x": 1, "y": 1 }, + { "x": 2, "y": 1 }, + { "x": 3, "y": 1 }, + { "x": 4, "y": 1 }, + { "x": 5, "y": 1 }, + { "x": 6, "y": 1 }, + { "x": 7, "y": 1 }, + { "x": 8, "y": 1 }, + { "x": 9, "y": 1 }, + { "x": 10, "y": 1 }, + { "x": 11, "y": 1 }, + { "x": 0, "y": 2 }, + { "x": 1, "y": 2 }, + { "x": 2, "y": 2 }, + { "x": 3, "y": 2 }, + { "x": 4, "y": 2 }, + { "x": 5, "y": 2 }, + { "x": 6, "y": 2 }, + { "x": 7, "y": 2 }, + { "x": 8, "y": 2 }, + { "x": 9, "y": 2 }, + { "x": 10, "y": 2 }, + { "x": 11, "y": 2 }, + { "x": 0, "y": 3 }, + { "x": 1, "y": 3 }, + { "x": 2, "y": 3 }, + { "x": 3, "y": 3 }, + { "x": 4, "y": 3, "w": 2 }, + { "x": 6, "y": 3, "w": 2 }, + { "x": 8, "y": 3 }, + { "x": 9, "y": 3 }, + { "x": 10, "y": 3 }, + { "x": 11, "y": 3 } + ] + } + } +} diff --git a/keyboards/planck/rev6_drop/matrix.c b/keyboards/planck/rev6_drop/matrix.c new file mode 100644 index 0000000000..1fb6ba0d42 --- /dev/null +++ b/keyboards/planck/rev6_drop/matrix.c @@ -0,0 +1,166 @@ +/* + * Copyright 2018 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include +#include +#include "hal.h" +#include "timer.h" +#include "wait.h" +#include "debug.h" +#include "matrix.h" + +/* + * col: { B11, B10, B2, B1, A7, B0 } + * row: { A10, A9, A8, B15, C13, C14, C15, A2 } + */ +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_COLS]; +static bool debouncing = false; +static uint16_t debouncing_time = 0; + +__attribute__((weak)) void matrix_init_user(void) {} + +__attribute__((weak)) void matrix_scan_user(void) {} + +__attribute__((weak)) void matrix_init_kb(void) { matrix_init_user(); } + +__attribute__((weak)) void matrix_scan_kb(void) { matrix_scan_user(); } + +void matrix_init(void) { + printf("matrix init\n"); + // debug_matrix = true; + + // actual matrix setup + palSetPadMode(GPIOB, 11, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOB, 10, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOB, 2, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOB, 1, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOA, 7, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOB, 0, PAL_MODE_OUTPUT_PUSHPULL); + + palSetPadMode(GPIOA, 10, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOA, 9, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOA, 8, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOB, 15, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOC, 13, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOC, 14, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOC, 15, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOA, 2, PAL_MODE_INPUT_PULLDOWN); + + memset(matrix, 0, MATRIX_ROWS * sizeof(matrix_row_t)); + memset(matrix_debouncing, 0, MATRIX_COLS * sizeof(matrix_row_t)); + + matrix_init_quantum(); +} + +uint8_t matrix_scan(void) { + // actual matrix + for (int col = 0; col < MATRIX_COLS; col++) { + matrix_row_t data = 0; + + // strobe col { B11, B10, B2, B1, A7, B0 } + switch (col) { + case 0: + palSetPad(GPIOB, 11); + break; + case 1: + palSetPad(GPIOB, 10); + break; + case 2: + palSetPad(GPIOB, 2); + break; + case 3: + palSetPad(GPIOB, 1); + break; + case 4: + palSetPad(GPIOA, 7); + break; + case 5: + palSetPad(GPIOB, 0); + break; + } + + // need wait to settle pin state + wait_us(20); + + // read row data { A10, A9, A8, B15, C13, C14, C15, A2 } + data = ((palReadPad(GPIOA, 10) << 0) | (palReadPad(GPIOA, 9) << 1) | (palReadPad(GPIOA, 8) << 2) | (palReadPad(GPIOB, 15) << 3) | (palReadPad(GPIOC, 13) << 4) | (palReadPad(GPIOC, 14) << 5) | (palReadPad(GPIOC, 15) << 6) | (palReadPad(GPIOA, 2) << 7)); + + // unstrobe col { B11, B10, B2, B1, A7, B0 } + switch (col) { + case 0: + palClearPad(GPIOB, 11); + break; + case 1: + palClearPad(GPIOB, 10); + break; + case 2: + palClearPad(GPIOB, 2); + break; + case 3: + palClearPad(GPIOB, 1); + break; + case 4: + palClearPad(GPIOA, 7); + break; + case 5: + palClearPad(GPIOB, 0); + break; + } + + if (matrix_debouncing[col] != data) { + matrix_debouncing[col] = data; + debouncing = true; + debouncing_time = timer_read(); + } + } + + if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCE) { + for (int row = 0; row < MATRIX_ROWS; row++) { + matrix[row] = 0; + for (int col = 0; col < MATRIX_COLS; col++) { + matrix[row] |= ((matrix_debouncing[col] & (1 << row) ? 1 : 0) << col); + } + } + debouncing = false; + } + + matrix_scan_quantum(); + + return 1; +} + +bool matrix_is_on(uint8_t row, uint8_t col) { return (matrix[row] & (1 << col)); } + +matrix_row_t matrix_get_row(uint8_t row) { return matrix[row]; } + +void matrix_print(void) { + printf("\nr/c 01234567\n"); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + printf("%X0: ", row); + matrix_row_t data = matrix_get_row(row); + for (int col = 0; col < MATRIX_COLS; col++) { + if (data & (1 << col)) + printf("1"); + else + printf("0"); + } + printf("\n"); + } +} diff --git a/keyboards/planck/rev6_drop/mcuconf.h b/keyboards/planck/rev6_drop/mcuconf.h new file mode 100644 index 0000000000..31abf13b63 --- /dev/null +++ b/keyboards/planck/rev6_drop/mcuconf.h @@ -0,0 +1,39 @@ +/* Copyright 2020 QMK Contributors + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include_next "mcuconf.h" + +// The SysTick timer from the normal quantum/stm32 uses TIM2 -- the WS2812 pin used +// on the Planck requires the use of TIM2 to run PWM -- rework which timers are +// allocated for PWM usage. +#undef STM32_PWM_USE_TIM2 +#define STM32_PWM_USE_TIM2 TRUE + +#undef STM32_DAC_USE_DAC1_CH1 +#define STM32_DAC_USE_DAC1_CH1 TRUE +#undef STM32_DAC_USE_DAC1_CH2 +#define STM32_DAC_USE_DAC1_CH2 TRUE +#undef STM32_GPT_USE_TIM6 +#define STM32_GPT_USE_TIM6 TRUE +#undef STM32_GPT_USE_TIM7 +#define STM32_GPT_USE_TIM7 TRUE +#undef STM32_GPT_USE_TIM8 +#define STM32_GPT_USE_TIM8 TRUE + +// As mentioned above, we need to reallocate the SysTick timer used from +// TIM2 to TIM3. +#undef STM32_ST_USE_TIMER +#define STM32_ST_USE_TIMER 3 diff --git a/keyboards/planck/rev6_drop/readme.md b/keyboards/planck/rev6_drop/readme.md new file mode 100644 index 0000000000..0ea2619acb --- /dev/null +++ b/keyboards/planck/rev6_drop/readme.md @@ -0,0 +1,13 @@ +# Planck + +A compact 40% (12x4) ortholinear keyboard kit made and sold by OLKB and Massdrop. A complete hardware rework of the Planck, sporting a faster and more powerful STM32 ARM Cortex-M4 microcontroller, with support for rotary encoders and three additional layouts. [More info on qmk.fm](http://qmk.fm/planck/) + +* Keyboard Maintainer: [Jack Humbert](https://github.com/jackhumbert) +* Hardware Supported: Planck PCB rev6 +* Hardware Availability: [OLKB.com](https://olkb.com), [Massdrop](https://www.massdrop.com/buy/planck-mechanical-keyboard?mode=guest_open) + +Make example for this keyboard (after setting up your build environment): + + make planck/rev6_drop:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/planck/rev6_drop/rev6_drop.c b/keyboards/planck/rev6_drop/rev6_drop.c new file mode 100644 index 0000000000..4c41af3806 --- /dev/null +++ b/keyboards/planck/rev6_drop/rev6_drop.c @@ -0,0 +1,44 @@ +/* Copyright 2018 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "rev6_drop.h" + +#ifdef RGB_MATRIX_ENABLE +// clang-format off +led_config_t g_led_config = { { + // Key Matrix to LED Index + { NO_LED, 6, NO_LED, NO_LED, 5, NO_LED }, + { NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED }, + { NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, 0 }, + { NO_LED, 7, NO_LED, NO_LED, 2, NO_LED }, + { NO_LED, 4, NO_LED, NO_LED, 3, NO_LED }, + { NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED }, + { NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED }, + { NO_LED, 1, NO_LED, NO_LED, 8, NO_LED }, +}, { + // LED Index to Physical Position + {112, 39}, {148, 60}, {206, 53}, {206, 3}, {150, 3}, {74, 3}, {18, 3}, {18, 54}, {77, 60} +}, { + // LED Index to Flag + LED_FLAG_ALL, LED_FLAG_ALL, LED_FLAG_ALL, LED_FLAG_ALL, LED_FLAG_ALL, + LED_FLAG_ALL, LED_FLAG_ALL, LED_FLAG_ALL, LED_FLAG_ALL +} }; + +// LED physical location index +// 6 5 4 3 +// 0 +// 7 8 1 2 + +#endif diff --git a/keyboards/planck/rev6_drop/rev6_drop.h b/keyboards/planck/rev6_drop/rev6_drop.h new file mode 100644 index 0000000000..bc9434a026 --- /dev/null +++ b/keyboards/planck/rev6_drop/rev6_drop.h @@ -0,0 +1,108 @@ +/* Copyright 2018 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "planck.h" + +#define LAYOUT_planck_1x2uC( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k36, k37, k38, k39, k3a, k3b \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05 }, \ + { k10, k11, k12, k13, k14, k15 }, \ + { k20, k21, k22, k23, k24, k25 }, \ + { k30, k31, k32, k39, k3a, k3b }, \ + { k06, k07, k08, k09, k0a, k0b }, \ + { k16, k17, k18, k19, k1a, k1b }, \ + { k26, k27, k28, k29, k2a, k2b }, \ + { k36, k37, k38, k33, k34, KC_NO } \ +} + +#define LAYOUT_planck_1x2uR( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k35, k37, k38, k39, k3a, k3b \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05 }, \ + { k10, k11, k12, k13, k14, k15 }, \ + { k20, k21, k22, k23, k24, k25 }, \ + { k30, k31, k32, k39, k3a, k3b }, \ + { k06, k07, k08, k09, k0a, k0b }, \ + { k16, k17, k18, k19, k1a, k1b }, \ + { k26, k27, k28, k29, k2a, k2b }, \ + { KC_NO, k37, k38, k33, k34, k35 } \ +} + +#define LAYOUT_planck_1x2uL( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k35, k36, k37, k38, k39, k3a, k3b \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05 }, \ + { k10, k11, k12, k13, k14, k15 }, \ + { k20, k21, k22, k23, k24, k25 }, \ + { k30, k31, k32, k39, k3a, k3b }, \ + { k06, k07, k08, k09, k0a, k0b }, \ + { k16, k17, k18, k19, k1a, k1b }, \ + { k26, k27, k28, k29, k2a, k2b }, \ + { k36, k37, k38, k33, KC_NO, k35 } \ +} + +#define LAYOUT_planck_2x2u( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k35, k37, k38, k39, k3a, k3b \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05 }, \ + { k10, k11, k12, k13, k14, k15 }, \ + { k20, k21, k22, k23, k24, k25 }, \ + { k30, k31, k32, k39, k3a, k3b }, \ + { k06, k07, k08, k09, k0a, k0b }, \ + { k16, k17, k18, k19, k1a, k1b }, \ + { k26, k27, k28, k29, k2a, k2b }, \ + { KC_NO, k37, k38, k33, KC_NO, k35 } \ +} + +#define LAYOUT_ortho_4x12( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05 }, \ + { k10, k11, k12, k13, k14, k15 }, \ + { k20, k21, k22, k23, k24, k25 }, \ + { k30, k31, k32, k39, k3a, k3b }, \ + { k06, k07, k08, k09, k0a, k0b }, \ + { k16, k17, k18, k19, k1a, k1b }, \ + { k26, k27, k28, k29, k2a, k2b }, \ + { k36, k37, k38, k33, k34, k35 } \ +} + + +#define LAYOUT LAYOUT_ortho_4x12 +#define LAYOUT_planck_mit LAYOUT_planck_1x2uC +#define LAYOUT_planck_grid LAYOUT_ortho_4x12 diff --git a/keyboards/planck/rev6_drop/rules.mk b/keyboards/planck/rev6_drop/rules.mk new file mode 100644 index 0000000000..c35de3d74b --- /dev/null +++ b/keyboards/planck/rev6_drop/rules.mk @@ -0,0 +1,33 @@ +# MCU name +MCU = STM32F303 + +# Bootloader selection +BOOTLOADER = stm32-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = yes # Audio output +WS2812_DRIVER = pwm +CUSTOM_MATRIX = yes +# Do not enable RGB_MATRIX_ENABLE together with RGBLIGHT_ENABLE +RGB_MATRIX_ENABLE = no +RGB_MATRIX_DRIVER = WS2812 +ENCODER_ENABLE = yes +DIP_SWITCH_ENABLE = yes + +SRC += matrix.c + +LAYOUTS = ortho_4x12 planck_mit +LAYOUTS_HAS_RGB = no diff --git a/keyboards/preonic/preonic.h b/keyboards/preonic/preonic.h index 4f8ebcc3ee..6b10a425ab 100644 --- a/keyboards/preonic/preonic.h +++ b/keyboards/preonic/preonic.h @@ -1,3 +1,20 @@ +/* + * Copyright 2018 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + #pragma once #include "quantum.h" @@ -5,16 +22,14 @@ /************************************************** ** Include headers specific to keyboard revision ** **************************************************/ -#ifdef KEYBOARD_preonic_rev1 - #include "rev1.h" -#endif - -#ifdef KEYBOARD_preonic_rev2 - #include "rev2.h" -#endif - -#ifdef KEYBOARD_preonic_rev3 - #include "rev3.h" +#if defined(KEYBOARD_preonic_rev1) +# include "rev1.h" +#elif defined(KEYBOARD_preonic_rev2) +# include "rev2.h" +#elif defined(KEYBOARD_preonic_rev3) +# include "rev3.h" +#elif defined(KEYBOARD_preonic_rev3_drop) +# include "rev3_drop.h" #endif diff --git a/keyboards/preonic/rev3_drop/chconf.h b/keyboards/preonic/rev3_drop/chconf.h new file mode 100644 index 0000000000..47dd995f81 --- /dev/null +++ b/keyboards/preonic/rev3_drop/chconf.h @@ -0,0 +1,29 @@ +/* Copyright 2021 QMK Contributors + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +/* + * This file was auto-generated by: + * `qmk chibios-confmigrate -i keyboards/preonic/rev3/chconf.h -r platforms/chibios/QMK_PROTON_C/configs/chconf.h` + */ + +#pragma once + +#define CH_CFG_ST_RESOLUTION 16 + +#define CH_CFG_ST_FREQUENCY 10000 + +#include_next + diff --git a/keyboards/preonic/rev3_drop/config.h b/keyboards/preonic/rev3_drop/config.h new file mode 100644 index 0000000000..1a0605e739 --- /dev/null +++ b/keyboards/preonic/rev3_drop/config.h @@ -0,0 +1,110 @@ +/* + * Copyright 2018 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +/* USB Device descriptor parameter */ +#define DEVICE_VER 0x0003 +#define PRODUCT_ID 0xA649 +#undef MANUFACTURER +#define MANUFACTURER Drop + +#undef MATRIX_ROWS +#undef MATRIX_COLS +/* key matrix size */ +#define MATRIX_ROWS 10 +#define MATRIX_COLS 6 + +#undef MATRIX_ROW_PINS +#undef MATRIX_COL_PINS +#define MATRIX_ROW_PINS { A10, A9, A8, B15, C13, C14, C15, A2, A3, A6 } +#define MATRIX_COL_PINS { B11, B10, B2, B1, A7, B0 } +#define UNUSED_PINS + +#define ENCODERS_PAD_A { B12 } +#define ENCODERS_PAD_B { B13 } + +#define DIP_SWITCH_PINS { B14, A15, A0, B9 } + +#define MUSIC_MAP +#undef AUDIO_VOICES +#undef AUDIO_PIN +#define AUDIO_PIN A5 +#define AUDIO_PIN_ALT A4 +#define AUDIO_PIN_ALT_AS_NEGATIVE + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +// #define DEBOUNCE 6 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +//#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +//#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * WS2812 Underglow Matrix options + */ +#define RGB_DI_PIN A1 +#define RGBLED_NUM 9 +#define RGBLIGHT_ANIMATIONS +// RGB Matrix support +#define DRIVER_LED_TOTAL RGBLED_NUM + +#define WS2812_PWM_DRIVER PWMD2 +#define WS2812_PWM_CHANNEL 2 +#define WS2812_PWM_PAL_MODE 1 +#define WS2812_DMA_STREAM STM32_DMA1_STREAM2 +#define WS2812_DMA_CHANNEL 2 diff --git a/keyboards/preonic/rev3_drop/halconf.h b/keyboards/preonic/rev3_drop/halconf.h new file mode 100644 index 0000000000..48b76d2f44 --- /dev/null +++ b/keyboards/preonic/rev3_drop/halconf.h @@ -0,0 +1,22 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#define HAL_USE_PWM TRUE +#define HAL_USE_GPT TRUE +#define HAL_USE_DAC TRUE + +#include_next diff --git a/keyboards/preonic/rev3_drop/info.json b/keyboards/preonic/rev3_drop/info.json new file mode 100644 index 0000000000..8b7a65384e --- /dev/null +++ b/keyboards/preonic/rev3_drop/info.json @@ -0,0 +1,342 @@ +{ + "keyboard_name": "Preonic rev. 3", + "url": "https://olkb.com/preonic", + "maintainer": "jackhumbert", + "layouts": { + "LAYOUT_preonic_1x2uC": { + "layout": [ + {"x": 0, "y": 0}, + {"x": 1, "y": 0}, + {"x": 2, "y": 0}, + {"x": 3, "y": 0}, + {"x": 4, "y": 0}, + {"x": 5, "y": 0}, + {"x": 6, "y": 0}, + {"x": 7, "y": 0}, + {"x": 8, "y": 0}, + {"x": 9, "y": 0}, + {"x": 10, "y": 0}, + {"x": 11, "y": 0}, + + {"x": 0, "y": 1}, + {"x": 1, "y": 1}, + {"x": 2, "y": 1}, + {"x": 3, "y": 1}, + {"x": 4, "y": 1}, + {"x": 5, "y": 1}, + {"x": 6, "y": 1}, + {"x": 7, "y": 1}, + {"x": 8, "y": 1}, + {"x": 9, "y": 1}, + {"x": 10, "y": 1}, + {"x": 11, "y": 1}, + + {"x": 0, "y": 2}, + {"x": 1, "y": 2}, + {"x": 2, "y": 2}, + {"x": 3, "y": 2}, + {"x": 4, "y": 2}, + {"x": 5, "y": 2}, + {"x": 6, "y": 2}, + {"x": 7, "y": 2}, + {"x": 8, "y": 2}, + {"x": 9, "y": 2}, + {"x": 10, "y": 2}, + {"x": 11, "y": 2}, + + {"x": 0, "y": 3}, + {"x": 1, "y": 3}, + {"x": 2, "y": 3}, + {"x": 3, "y": 3}, + {"x": 4, "y": 3}, + {"x": 5, "y": 3}, + {"x": 6, "y": 3}, + {"x": 7, "y": 3}, + {"x": 8, "y": 3}, + {"x": 9, "y": 3}, + {"x": 10, "y": 3}, + {"x": 11, "y": 3}, + + {"x": 0, "y": 4}, + {"x": 1, "y": 4}, + {"x": 2, "y": 4}, + {"x": 3, "y": 4}, + {"x": 4, "y": 4}, + {"x": 5, "y": 4, "w": 2}, + {"x": 7, "y": 4}, + {"x": 8, "y": 4}, + {"x": 9, "y": 4}, + {"x": 10, "y": 4}, + {"x": 11, "y": 4} + ] + }, + "LAYOUT_preonic_1x2uR": { + "layout": [ + {"x": 0, "y": 0}, + {"x": 1, "y": 0}, + {"x": 2, "y": 0}, + {"x": 3, "y": 0}, + {"x": 4, "y": 0}, + {"x": 5, "y": 0}, + {"x": 6, "y": 0}, + {"x": 7, "y": 0}, + {"x": 8, "y": 0}, + {"x": 9, "y": 0}, + {"x": 10, "y": 0}, + {"x": 11, "y": 0}, + + {"x": 0, "y": 1}, + {"x": 1, "y": 1}, + {"x": 2, "y": 1}, + {"x": 3, "y": 1}, + {"x": 4, "y": 1}, + {"x": 5, "y": 1}, + {"x": 6, "y": 1}, + {"x": 7, "y": 1}, + {"x": 8, "y": 1}, + {"x": 9, "y": 1}, + {"x": 10, "y": 1}, + {"x": 11, "y": 1}, + + {"x": 0, "y": 2}, + {"x": 1, "y": 2}, + {"x": 2, "y": 2}, + {"x": 3, "y": 2}, + {"x": 4, "y": 2}, + {"x": 5, "y": 2}, + {"x": 6, "y": 2}, + {"x": 7, "y": 2}, + {"x": 8, "y": 2}, + {"x": 9, "y": 2}, + {"x": 10, "y": 2}, + {"x": 11, "y": 2}, + + {"x": 0, "y": 3}, + {"x": 1, "y": 3}, + {"x": 2, "y": 3}, + {"x": 3, "y": 3}, + {"x": 4, "y": 3}, + {"x": 5, "y": 3}, + {"x": 6, "y": 3}, + {"x": 7, "y": 3}, + {"x": 8, "y": 3}, + {"x": 9, "y": 3}, + {"x": 10, "y": 3}, + {"x": 11, "y": 3}, + + {"x": 0, "y": 4}, + {"x": 1, "y": 4}, + {"x": 2, "y": 4}, + {"x": 3, "y": 4}, + {"x": 4, "y": 4}, + {"x": 5, "y": 4}, + {"x": 6, "y": 4, "w": 2}, + {"x": 8, "y": 4}, + {"x": 9, "y": 4}, + {"x": 10, "y": 4}, + {"x": 11, "y": 4} + ] + }, + "LAYOUT_preonic_1x2uL": { + "layout": [ + {"x": 0, "y": 0}, + {"x": 1, "y": 0}, + {"x": 2, "y": 0}, + {"x": 3, "y": 0}, + {"x": 4, "y": 0}, + {"x": 5, "y": 0}, + {"x": 6, "y": 0}, + {"x": 7, "y": 0}, + {"x": 8, "y": 0}, + {"x": 9, "y": 0}, + {"x": 10, "y": 0}, + {"x": 11, "y": 0}, + + {"x": 0, "y": 1}, + {"x": 1, "y": 1}, + {"x": 2, "y": 1}, + {"x": 3, "y": 1}, + {"x": 4, "y": 1}, + {"x": 5, "y": 1}, + {"x": 6, "y": 1}, + {"x": 7, "y": 1}, + {"x": 8, "y": 1}, + {"x": 9, "y": 1}, + {"x": 10, "y": 1}, + {"x": 11, "y": 1}, + + {"x": 0, "y": 2}, + {"x": 1, "y": 2}, + {"x": 2, "y": 2}, + {"x": 3, "y": 2}, + {"x": 4, "y": 2}, + {"x": 5, "y": 2}, + {"x": 6, "y": 2}, + {"x": 7, "y": 2}, + {"x": 8, "y": 2}, + {"x": 9, "y": 2}, + {"x": 10, "y": 2}, + {"x": 11, "y": 2}, + + {"x": 0, "y": 3}, + {"x": 1, "y": 3}, + {"x": 2, "y": 3}, + {"x": 3, "y": 3}, + {"x": 4, "y": 3}, + {"x": 5, "y": 3}, + {"x": 6, "y": 3}, + {"x": 7, "y": 3}, + {"x": 8, "y": 3}, + {"x": 9, "y": 3}, + {"x": 10, "y": 3}, + {"x": 11, "y": 3}, + + {"x": 0, "y": 4}, + {"x": 1, "y": 4}, + {"x": 2, "y": 4}, + {"x": 3, "y": 4}, + {"x": 4, "y": 4, "w": 2}, + {"x": 6, "y": 4}, + {"x": 7, "y": 4}, + {"x": 8, "y": 4}, + {"x": 9, "y": 4}, + {"x": 10, "y": 4}, + {"x": 11, "y": 4} + ] + }, + "LAYOUT_preonic_2x2u": { + "layout": [ + {"x": 0, "y": 0}, + {"x": 1, "y": 0}, + {"x": 2, "y": 0}, + {"x": 3, "y": 0}, + {"x": 4, "y": 0}, + {"x": 5, "y": 0}, + {"x": 6, "y": 0}, + {"x": 7, "y": 0}, + {"x": 8, "y": 0}, + {"x": 9, "y": 0}, + {"x": 10, "y": 0}, + {"x": 11, "y": 0}, + + {"x": 0, "y": 1}, + {"x": 1, "y": 1}, + {"x": 2, "y": 1}, + {"x": 3, "y": 1}, + {"x": 4, "y": 1}, + {"x": 5, "y": 1}, + {"x": 6, "y": 1}, + {"x": 7, "y": 1}, + {"x": 8, "y": 1}, + {"x": 9, "y": 1}, + {"x": 10, "y": 1}, + {"x": 11, "y": 1}, + + {"x": 0, "y": 2}, + {"x": 1, "y": 2}, + {"x": 2, "y": 2}, + {"x": 3, "y": 2}, + {"x": 4, "y": 2}, + {"x": 5, "y": 2}, + {"x": 6, "y": 2}, + {"x": 7, "y": 2}, + {"x": 8, "y": 2}, + {"x": 9, "y": 2}, + {"x": 10, "y": 2}, + {"x": 11, "y": 2}, + + {"x": 0, "y": 3}, + {"x": 1, "y": 3}, + {"x": 2, "y": 3}, + {"x": 3, "y": 3}, + {"x": 4, "y": 3}, + {"x": 5, "y": 3}, + {"x": 6, "y": 3}, + {"x": 7, "y": 3}, + {"x": 8, "y": 3}, + {"x": 9, "y": 3}, + {"x": 10, "y": 3}, + {"x": 11, "y": 3}, + + {"x": 0, "y": 4}, + {"x": 1, "y": 4}, + {"x": 2, "y": 4}, + {"x": 3, "y": 4}, + {"x": 4, "y": 4, "w": 2}, + {"x": 6, "y": 4, "w": 2}, + {"x": 8, "y": 4}, + {"x": 9, "y": 4}, + {"x": 10, "y": 4}, + {"x": 11, "y": 4} + ] + }, + "LAYOUT_ortho_5x12": { + "layout": [ + {"x": 0, "y": 0}, + {"x": 1, "y": 0}, + {"x": 2, "y": 0}, + {"x": 3, "y": 0}, + {"x": 4, "y": 0}, + {"x": 5, "y": 0}, + {"x": 6, "y": 0}, + {"x": 7, "y": 0}, + {"x": 8, "y": 0}, + {"x": 9, "y": 0}, + {"x": 10, "y": 0}, + {"x": 11, "y": 0}, + + {"x": 0, "y": 1}, + {"x": 1, "y": 1}, + {"x": 2, "y": 1}, + {"x": 3, "y": 1}, + {"x": 4, "y": 1}, + {"x": 5, "y": 1}, + {"x": 6, "y": 1}, + {"x": 7, "y": 1}, + {"x": 8, "y": 1}, + {"x": 9, "y": 1}, + {"x": 10, "y": 1}, + {"x": 11, "y": 1}, + + {"x": 0, "y": 2}, + {"x": 1, "y": 2}, + {"x": 2, "y": 2}, + {"x": 3, "y": 2}, + {"x": 4, "y": 2}, + {"x": 5, "y": 2}, + {"x": 6, "y": 2}, + {"x": 7, "y": 2}, + {"x": 8, "y": 2}, + {"x": 9, "y": 2}, + {"x": 10, "y": 2}, + {"x": 11, "y": 2}, + + {"x": 0, "y": 3}, + {"x": 1, "y": 3}, + {"x": 2, "y": 3}, + {"x": 3, "y": 3}, + {"x": 4, "y": 3}, + {"x": 5, "y": 3}, + {"x": 6, "y": 3}, + {"x": 7, "y": 3}, + {"x": 8, "y": 3}, + {"x": 9, "y": 3}, + {"x": 10, "y": 3}, + {"x": 11, "y": 3}, + + {"x": 0, "y": 4}, + {"x": 1, "y": 4}, + {"x": 2, "y": 4}, + {"x": 3, "y": 4}, + {"x": 4, "y": 4}, + {"x": 5, "y": 4}, + {"x": 6, "y": 4}, + {"x": 7, "y": 4}, + {"x": 8, "y": 4}, + {"x": 9, "y": 4}, + {"x": 10, "y": 4}, + {"x": 11, "y": 4} + ] + } + } +} diff --git a/keyboards/preonic/rev3_drop/matrix.c b/keyboards/preonic/rev3_drop/matrix.c new file mode 100644 index 0000000000..b094d28cdc --- /dev/null +++ b/keyboards/preonic/rev3_drop/matrix.c @@ -0,0 +1,168 @@ +/* + * Copyright 2018 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include +#include +#include "hal.h" +#include "timer.h" +#include "wait.h" +#include "debug.h" +#include "matrix.h" + +/* + * col: { B11, B10, B2, B1, A7, B0 } + * row: { A10, A9, A8, B15, C13, C14, C15, A2 } + */ +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_COLS]; +static bool debouncing = false; +static uint16_t debouncing_time = 0; + +__attribute__((weak)) void matrix_init_user(void) {} + +__attribute__((weak)) void matrix_scan_user(void) {} + +__attribute__((weak)) void matrix_init_kb(void) { matrix_init_user(); } + +__attribute__((weak)) void matrix_scan_kb(void) { matrix_scan_user(); } + +void matrix_init(void) { + printf("matrix init\n"); + // debug_matrix = true; + + // actual matrix setup + palSetPadMode(GPIOB, 11, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOB, 10, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOB, 2, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOB, 1, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOA, 7, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOB, 0, PAL_MODE_OUTPUT_PUSHPULL); + + palSetPadMode(GPIOA, 10, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOA, 9, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOA, 8, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOB, 15, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOC, 13, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOC, 14, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOC, 15, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOA, 2, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOA, 3, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOA, 6, PAL_MODE_INPUT_PULLDOWN); + + memset(matrix, 0, MATRIX_ROWS * sizeof(matrix_row_t)); + memset(matrix_debouncing, 0, MATRIX_COLS * sizeof(matrix_row_t)); + + matrix_init_quantum(); +} + +uint8_t matrix_scan(void) { + // actual matrix + for (int col = 0; col < MATRIX_COLS; col++) { + matrix_row_t data = 0; + + // strobe col { B11, B10, B2, B1, A7, B0 } + switch (col) { + case 0: + palSetPad(GPIOB, 11); + break; + case 1: + palSetPad(GPIOB, 10); + break; + case 2: + palSetPad(GPIOB, 2); + break; + case 3: + palSetPad(GPIOB, 1); + break; + case 4: + palSetPad(GPIOA, 7); + break; + case 5: + palSetPad(GPIOB, 0); + break; + } + + // need wait to settle pin state + wait_us(20); + + // read row data { A10, A9, A8, B15, C13, C14, C15, A2 } + data = ((palReadPad(GPIOA, 10) << 0) | (palReadPad(GPIOA, 9) << 1) | (palReadPad(GPIOA, 8) << 2) | (palReadPad(GPIOB, 15) << 3) | (palReadPad(GPIOC, 13) << 4) | (palReadPad(GPIOC, 14) << 5) | (palReadPad(GPIOC, 15) << 6) | (palReadPad(GPIOA, 2) << 7) | (palReadPad(GPIOA, 3) << 8) | (palReadPad(GPIOA, 6) << 9)); + + // unstrobe col { B11, B10, B2, B1, A7, B0 } + switch (col) { + case 0: + palClearPad(GPIOB, 11); + break; + case 1: + palClearPad(GPIOB, 10); + break; + case 2: + palClearPad(GPIOB, 2); + break; + case 3: + palClearPad(GPIOB, 1); + break; + case 4: + palClearPad(GPIOA, 7); + break; + case 5: + palClearPad(GPIOB, 0); + break; + } + + if (matrix_debouncing[col] != data) { + matrix_debouncing[col] = data; + debouncing = true; + debouncing_time = timer_read(); + } + } + + if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCE) { + for (int row = 0; row < MATRIX_ROWS; row++) { + matrix[row] = 0; + for (int col = 0; col < MATRIX_COLS; col++) { + matrix[row] |= ((matrix_debouncing[col] & (1 << row) ? 1 : 0) << col); + } + } + debouncing = false; + } + + matrix_scan_quantum(); + + return 1; +} + +bool matrix_is_on(uint8_t row, uint8_t col) { return (matrix[row] & (1 << col)); } + +matrix_row_t matrix_get_row(uint8_t row) { return matrix[row]; } + +void matrix_print(void) { + printf("\nr/c 01234567\n"); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + printf("%X0: ", row); + matrix_row_t data = matrix_get_row(row); + for (int col = 0; col < MATRIX_COLS; col++) { + if (data & (1 << col)) + printf("1"); + else + printf("0"); + } + printf("\n"); + } +} diff --git a/keyboards/preonic/rev3_drop/mcuconf.h b/keyboards/preonic/rev3_drop/mcuconf.h new file mode 100644 index 0000000000..31abf13b63 --- /dev/null +++ b/keyboards/preonic/rev3_drop/mcuconf.h @@ -0,0 +1,39 @@ +/* Copyright 2020 QMK Contributors + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include_next "mcuconf.h" + +// The SysTick timer from the normal quantum/stm32 uses TIM2 -- the WS2812 pin used +// on the Planck requires the use of TIM2 to run PWM -- rework which timers are +// allocated for PWM usage. +#undef STM32_PWM_USE_TIM2 +#define STM32_PWM_USE_TIM2 TRUE + +#undef STM32_DAC_USE_DAC1_CH1 +#define STM32_DAC_USE_DAC1_CH1 TRUE +#undef STM32_DAC_USE_DAC1_CH2 +#define STM32_DAC_USE_DAC1_CH2 TRUE +#undef STM32_GPT_USE_TIM6 +#define STM32_GPT_USE_TIM6 TRUE +#undef STM32_GPT_USE_TIM7 +#define STM32_GPT_USE_TIM7 TRUE +#undef STM32_GPT_USE_TIM8 +#define STM32_GPT_USE_TIM8 TRUE + +// As mentioned above, we need to reallocate the SysTick timer used from +// TIM2 to TIM3. +#undef STM32_ST_USE_TIMER +#define STM32_ST_USE_TIMER 3 diff --git a/keyboards/preonic/rev3_drop/rev3_drop.c b/keyboards/preonic/rev3_drop/rev3_drop.c new file mode 100644 index 0000000000..0b3f452c44 --- /dev/null +++ b/keyboards/preonic/rev3_drop/rev3_drop.c @@ -0,0 +1,61 @@ +/* Copyright 2018 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "rev3_drop.h" + +#ifdef RGB_MATRIX_ENABLE +led_config_t g_led_config = { { + // Key Matrix to LED Index + { NO_LED, 6, NO_LED, NO_LED, 5, NO_LED }, + { NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED }, + { NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, 0 }, + { NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED }, + { NO_LED, 4, NO_LED, NO_LED, 3, NO_LED }, + { NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED }, + { NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED }, + { NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED }, + { NO_LED, 7, NO_LED, NO_LED, 2, NO_LED }, + { NO_LED, 1, NO_LED, NO_LED, 8, NO_LED }, +}, { + // LED Index to Physical Position + {112, 39}, {148, 60}, {206, 53}, {206, 3}, {150, 3}, {74, 3}, {18, 3}, {18, 54}, {77, 60} +}, { + // LED Index to Flag + LED_FLAG_ALL, LED_FLAG_ALL, LED_FLAG_ALL, LED_FLAG_ALL, LED_FLAG_ALL, + LED_FLAG_ALL, LED_FLAG_ALL, LED_FLAG_ALL, LED_FLAG_ALL +} }; + +// LED physical location index +// 6 5 4 3 +// 0 +// 7 8 1 2 +#endif + + +#ifdef SWAP_HANDS_ENABLE +__attribute__ ((weak)) +const keypos_t PROGMEM hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { + {{5, 4}, {4, 4}, {3, 4}, {2, 4}, {1, 4}, {0, 4}}, + {{5, 5}, {4, 5}, {3, 5}, {2, 5}, {1, 5}, {0, 5}}, + {{5, 6}, {4, 6}, {3, 6}, {2, 6}, {1, 6}, {0, 6}}, + {{5, 7}, {4, 7}, {3, 7}, {2, 7}, {1, 7}, {0, 7}}, + {{5, 0}, {4, 0}, {3, 0}, {2, 0}, {1, 0}, {0, 0}}, + {{5, 1}, {4, 1}, {3, 1}, {2, 1}, {1, 1}, {0, 1}}, + {{5, 2}, {4, 2}, {3, 2}, {2, 2}, {1, 2}, {0, 2}}, + {{5, 3}, {4, 3}, {3, 3}, {2, 3}, {1, 3}, {0, 3}}, + {{5, 8}, {4, 8}, {3, 8}, {2, 8}, {1, 8}, {0, 8}}, + {{5, 9}, {4, 9}, {3, 9}, {2, 9}, {1, 9}, {0, 9}}, +}; +#endif diff --git a/keyboards/preonic/rev3_drop/rev3_drop.h b/keyboards/preonic/rev3_drop/rev3_drop.h new file mode 100644 index 0000000000..3cb9368757 --- /dev/null +++ b/keyboards/preonic/rev3_drop/rev3_drop.h @@ -0,0 +1,115 @@ +/* Copyright 2018 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "preonic.h" + +// clang-format off +#define LAYOUT_preonic_1x2uC( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, \ + k40, k41, k42, k43, k44, k45, k47, k48, k49, k4a, k4b \ +) { \ + { k00, k01, k02, k03, k04, k05 }, \ + { k10, k11, k12, k13, k14, k15 }, \ + { k20, k21, k22, k23, k24, k25 }, \ + { k30, k31, k32, k33, k34, k35 }, \ + { k06, k07, k08, k09, k0a, k0b }, \ + { k16, k17, k18, k19, k1a, k1b }, \ + { k26, k27, k28, k29, k2a, k2b }, \ + { k36, k37, k38, k39, k3a, k3b }, \ + { k40, k41, k42, k49, k4a, k4b }, \ + { k45, k47, k48, k43, k44, k45 } \ +} + +#define LAYOUT_preonic_1x2uR( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, \ + k40, k41, k42, k43, k44, k45, k47, k48, k49, k4a, k4b \ + ) { \ + { k00, k01, k02, k03, k04, k05 }, \ + { k10, k11, k12, k13, k14, k15 }, \ + { k20, k21, k22, k23, k24, k25 }, \ + { k30, k31, k32, k33, k34, k35 }, \ + { k06, k07, k08, k09, k0a, k0b }, \ + { k16, k17, k18, k19, k1a, k1b }, \ + { k26, k27, k28, k29, k2a, k2b }, \ + { k36, k37, k38, k39, k3a, k3b }, \ + { k40, k41, k42, k49, k4a, k4b }, \ + { k47, k47, k48, k43, k44, k45 } \ +} + +#define LAYOUT_preonic_1x2uL( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, \ + k40, k41, k42, k43, k44, k46, k47, k48, k49, k4a, k4b \ +) { \ + { k00, k01, k02, k03, k04, k05 }, \ + { k10, k11, k12, k13, k14, k15 }, \ + { k20, k21, k22, k23, k24, k25 }, \ + { k30, k31, k32, k33, k34, k35 }, \ + { k06, k07, k08, k09, k0a, k0b }, \ + { k16, k17, k18, k19, k1a, k1b }, \ + { k26, k27, k28, k29, k2a, k2b }, \ + { k36, k37, k38, k39, k3a, k3b }, \ + { k40, k41, k42, k49, k4a, k4b }, \ + { k46, k47, k48, k43, k44, k44 } \ +} + +#define LAYOUT_preonic_2x2u( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, \ + k40, k41, k42, k43, k44, k46, k48, k49, k4a, k4b \ +) { \ + { k00, k01, k02, k03, k04, k05 }, \ + { k10, k11, k12, k13, k14, k15 }, \ + { k20, k21, k22, k23, k24, k25 }, \ + { k30, k31, k32, k33, k34, k35 }, \ + { k06, k07, k08, k09, k0a, k0b }, \ + { k16, k17, k18, k19, k1a, k1b }, \ + { k26, k27, k28, k29, k2a, k2b }, \ + { k36, k37, k38, k39, k3a, k3b }, \ + { k40, k41, k42, k49, k4a, k4b }, \ + { k46, k46, k48, k43, k44, k44 } \ +} + +#define LAYOUT_ortho_5x12( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, \ + k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4a, k4b \ +) { \ + { k00, k01, k02, k03, k04, k05 }, \ + { k10, k11, k12, k13, k14, k15 }, \ + { k20, k21, k22, k23, k24, k25 }, \ + { k30, k31, k32, k33, k34, k35 }, \ + { k06, k07, k08, k09, k0a, k0b }, \ + { k16, k17, k18, k19, k1a, k1b }, \ + { k26, k27, k28, k29, k2a, k2b }, \ + { k36, k37, k38, k39, k3a, k3b }, \ + { k40, k41, k42, k49, k4a, k4b }, \ + { k46, k47, k48, k43, k44, k45 } \ +} diff --git a/keyboards/preonic/rev3_drop/rules.mk b/keyboards/preonic/rev3_drop/rules.mk new file mode 100644 index 0000000000..8ab62afe21 --- /dev/null +++ b/keyboards/preonic/rev3_drop/rules.mk @@ -0,0 +1,33 @@ +# MCU name +MCU = STM32F303 + +# Bootloader selection +BOOTLOADER = stm32-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = yes # Audio output +WS2812_DRIVER = pwm +CUSTOM_MATRIX = yes +ENCODER_ENABLE = yes +DIP_SWITCH_ENABLE = yes + +# Do not enable RGB_MATRIX_ENABLE together with RGBLIGHT_ENABLE +RGB_MATRIX_ENABLE = no +RGB_MATRIX_DRIVER = WS2812 + +SRC += matrix.c + +LAYOUTS = ortho_5x12 From d9ca201f79dce27de667c638ed6404bd4d10146a Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Sun, 19 Sep 2021 07:01:02 -0700 Subject: [PATCH 037/595] [Keyboard] Fix Compiler issues for quick17 (#14500) --- keyboards/yushakobo/quick17/keymaps/default/keymap.c | 1 + keyboards/yushakobo/quick17/keymaps/via/keymap.c | 1 + 2 files changed, 2 insertions(+) diff --git a/keyboards/yushakobo/quick17/keymaps/default/keymap.c b/keyboards/yushakobo/quick17/keymaps/default/keymap.c index a3873bc1ee..5f2f45a6eb 100644 --- a/keyboards/yushakobo/quick17/keymaps/default/keymap.c +++ b/keyboards/yushakobo/quick17/keymaps/default/keymap.c @@ -14,6 +14,7 @@ * along with this program. If not, see . */ #include QMK_KEYBOARD_H +#include "quick17_prefs.h" // Defines the keycodes used by our macros in process_record_user enum custom_keycodes { diff --git a/keyboards/yushakobo/quick17/keymaps/via/keymap.c b/keyboards/yushakobo/quick17/keymaps/via/keymap.c index a3873bc1ee..5f2f45a6eb 100644 --- a/keyboards/yushakobo/quick17/keymaps/via/keymap.c +++ b/keyboards/yushakobo/quick17/keymaps/via/keymap.c @@ -14,6 +14,7 @@ * along with this program. If not, see . */ #include QMK_KEYBOARD_H +#include "quick17_prefs.h" // Defines the keycodes used by our macros in process_record_user enum custom_keycodes { From 0e34efd9a2dd401a7cd38f552f7247b8afcb65fc Mon Sep 17 00:00:00 2001 From: XScorpion2 Date: Sun, 19 Sep 2021 13:31:17 -0500 Subject: [PATCH 038/595] [Keyboard] Quick fixes for the Mun to unblock customers (#14505) --- keyboards/rgbkb/mun/keymaps/xulkal2/rules.mk | 2 +- keyboards/rgbkb/mun/rules.mk | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/keyboards/rgbkb/mun/keymaps/xulkal2/rules.mk b/keyboards/rgbkb/mun/keymaps/xulkal2/rules.mk index b626305163..e35ec125e6 100644 --- a/keyboards/rgbkb/mun/keymaps/xulkal2/rules.mk +++ b/keyboards/rgbkb/mun/keymaps/xulkal2/rules.mk @@ -1,4 +1,4 @@ MOUSEKEY_ENABLE = yes # using for mouse wheel up and down, more granular than page up/down OPT_DEFS += -DRGB_UNLIMITED_POWER -DEBOUNCE_TYPE = sym_eager_pk \ No newline at end of file +#DEBOUNCE_TYPE = sym_eager_pk \ No newline at end of file diff --git a/keyboards/rgbkb/mun/rules.mk b/keyboards/rgbkb/mun/rules.mk index e81196f9ee..145d9d4aa8 100644 --- a/keyboards/rgbkb/mun/rules.mk +++ b/keyboards/rgbkb/mun/rules.mk @@ -39,7 +39,7 @@ OPT = 3 OPT_DEFS += -DOLED_FONT_H=\"../common/glcdfont.c\" OPT_DEFS += -Ikeyboards/rgbkb/common -# matrix optimisations -SRC += matrix.c +# matrix optimisations (broken, will fix later) +#SRC += matrix.c DEFAULT_FOLDER = rgbkb/mun/rev1 From fa5d21a58ebfe9782225c857ad2e533a0f65d161 Mon Sep 17 00:00:00 2001 From: Jack Humbert Date: Sun, 19 Sep 2021 14:43:37 -0400 Subject: [PATCH 039/595] [Keyboard] Enables I2C for OLKB rev*_drop boards (#14514) Co-authored-by: daskygit <32983009+daskygit@users.noreply.github.com> --- keyboards/planck/rev6_drop/halconf.h | 1 + keyboards/planck/rev6_drop/matrix.c | 12 ++++++------ keyboards/planck/rev6_drop/mcuconf.h | 5 +++++ keyboards/preonic/rev3_drop/halconf.h | 1 + keyboards/preonic/rev3_drop/matrix.c | 12 ++++++------ keyboards/preonic/rev3_drop/mcuconf.h | 4 ++++ 6 files changed, 23 insertions(+), 12 deletions(-) diff --git a/keyboards/planck/rev6_drop/halconf.h b/keyboards/planck/rev6_drop/halconf.h index 48b76d2f44..153eacb212 100644 --- a/keyboards/planck/rev6_drop/halconf.h +++ b/keyboards/planck/rev6_drop/halconf.h @@ -18,5 +18,6 @@ #define HAL_USE_PWM TRUE #define HAL_USE_GPT TRUE #define HAL_USE_DAC TRUE +#define HAL_USE_I2C TRUE #include_next diff --git a/keyboards/planck/rev6_drop/matrix.c b/keyboards/planck/rev6_drop/matrix.c index 1fb6ba0d42..49e115d029 100644 --- a/keyboards/planck/rev6_drop/matrix.c +++ b/keyboards/planck/rev6_drop/matrix.c @@ -43,7 +43,7 @@ __attribute__((weak)) void matrix_init_kb(void) { matrix_init_user(); } __attribute__((weak)) void matrix_scan_kb(void) { matrix_scan_user(); } void matrix_init(void) { - printf("matrix init\n"); + dprintf("matrix init\n"); // debug_matrix = true; // actual matrix setup @@ -151,16 +151,16 @@ bool matrix_is_on(uint8_t row, uint8_t col) { return (matrix[row] & (1 << col)); matrix_row_t matrix_get_row(uint8_t row) { return matrix[row]; } void matrix_print(void) { - printf("\nr/c 01234567\n"); + dprintf("\nr/c 01234567\n"); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - printf("%X0: ", row); + dprintf("%X0: ", row); matrix_row_t data = matrix_get_row(row); for (int col = 0; col < MATRIX_COLS; col++) { if (data & (1 << col)) - printf("1"); + dprintf("1"); else - printf("0"); + dprintf("0"); } - printf("\n"); + dprintf("\n"); } } diff --git a/keyboards/planck/rev6_drop/mcuconf.h b/keyboards/planck/rev6_drop/mcuconf.h index 31abf13b63..d7c29fcf65 100644 --- a/keyboards/planck/rev6_drop/mcuconf.h +++ b/keyboards/planck/rev6_drop/mcuconf.h @@ -37,3 +37,8 @@ // TIM2 to TIM3. #undef STM32_ST_USE_TIMER #define STM32_ST_USE_TIMER 3 + +// enable i2c +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE + diff --git a/keyboards/preonic/rev3_drop/halconf.h b/keyboards/preonic/rev3_drop/halconf.h index 48b76d2f44..153eacb212 100644 --- a/keyboards/preonic/rev3_drop/halconf.h +++ b/keyboards/preonic/rev3_drop/halconf.h @@ -18,5 +18,6 @@ #define HAL_USE_PWM TRUE #define HAL_USE_GPT TRUE #define HAL_USE_DAC TRUE +#define HAL_USE_I2C TRUE #include_next diff --git a/keyboards/preonic/rev3_drop/matrix.c b/keyboards/preonic/rev3_drop/matrix.c index b094d28cdc..392997e0a5 100644 --- a/keyboards/preonic/rev3_drop/matrix.c +++ b/keyboards/preonic/rev3_drop/matrix.c @@ -43,7 +43,7 @@ __attribute__((weak)) void matrix_init_kb(void) { matrix_init_user(); } __attribute__((weak)) void matrix_scan_kb(void) { matrix_scan_user(); } void matrix_init(void) { - printf("matrix init\n"); + dprintf("matrix init\n"); // debug_matrix = true; // actual matrix setup @@ -153,16 +153,16 @@ bool matrix_is_on(uint8_t row, uint8_t col) { return (matrix[row] & (1 << col)); matrix_row_t matrix_get_row(uint8_t row) { return matrix[row]; } void matrix_print(void) { - printf("\nr/c 01234567\n"); + dprintf("\nr/c 01234567\n"); for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - printf("%X0: ", row); + dprintf("%X0: ", row); matrix_row_t data = matrix_get_row(row); for (int col = 0; col < MATRIX_COLS; col++) { if (data & (1 << col)) - printf("1"); + dprintf("1"); else - printf("0"); + dprintf("0"); } - printf("\n"); + dprintf("\n"); } } diff --git a/keyboards/preonic/rev3_drop/mcuconf.h b/keyboards/preonic/rev3_drop/mcuconf.h index 31abf13b63..b51bf6708e 100644 --- a/keyboards/preonic/rev3_drop/mcuconf.h +++ b/keyboards/preonic/rev3_drop/mcuconf.h @@ -37,3 +37,7 @@ // TIM2 to TIM3. #undef STM32_ST_USE_TIMER #define STM32_ST_USE_TIMER 3 + +// enable i2c +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE \ No newline at end of file From e83fb69ae8a579648a6a73e00399d3d144e51f88 Mon Sep 17 00:00:00 2001 From: Pylon Date: Sun, 19 Sep 2021 14:47:13 -0400 Subject: [PATCH 041/595] [Keyboard] Enabled Mousekeys by default on Boston (#14507) --- keyboards/boston/rules.mk | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/keyboards/boston/rules.mk b/keyboards/boston/rules.mk index f46791e881..8792a0276f 100644 --- a/keyboards/boston/rules.mk +++ b/keyboards/boston/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # change yes to no to disable # BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite -MOUSEKEY_ENABLE = no # Mouse keys +MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration @@ -25,4 +25,4 @@ ENCODER_ENABLE = yes OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE # RGB setting -WS2812_DRIVER = bitbang \ No newline at end of file +WS2812_DRIVER = bitbang From 4348e2ffc11533a384d0eea452c954e57fe7e44c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Konstantin=20=C4=90or=C4=91evi=C4=87?= Date: Sun, 19 Sep 2021 20:47:40 +0200 Subject: [PATCH 042/595] [Keymap] Updates to existing keymaps and userspace (#14503) Co-authored-by: Drashna Jaelre --- .../doro67/multi/keymaps/konstantin/config.h | 2 - .../doro67/multi/keymaps/konstantin/rules.mk | 2 +- keyboards/dz60/keymaps/konstantin_b/rules.mk | 18 ++- .../evyd13/wasdat/keymaps/konstantin/config.h | 2 - .../evyd13/wasdat/keymaps/konstantin/rules.mk | 2 +- .../kbdfans/kbd6x/keymaps/konstantin/config.h | 2 - .../kbdfans/kbd6x/keymaps/konstantin/keymap.c | 107 ++++++++++-------- .../kbdfans/kbd6x/keymaps/konstantin/rules.mk | 4 +- .../melody96/keymaps/konstantin/rules.mk | 3 +- .../whitefox/keymaps/konstantin/rules.mk | 2 +- users/konstantin/config.h | 18 ++- users/konstantin/konstantin.c | 86 ++++++++------ users/konstantin/konstantin.h | 42 +++++-- users/konstantin/post_config.h | 22 ++++ users/konstantin/rgb.c | 16 +++ users/konstantin/rgb.h | 16 +++ users/konstantin/tap_dance.c | 16 +++ users/konstantin/tap_dance.h | 16 +++ users/konstantin/unicode.c | 16 +++ users/konstantin/unicode.h | 16 +++ 20 files changed, 295 insertions(+), 113 deletions(-) create mode 100644 users/konstantin/post_config.h diff --git a/keyboards/doro67/multi/keymaps/konstantin/config.h b/keyboards/doro67/multi/keymaps/konstantin/config.h index 1d12c7db37..3c2583e2d4 100644 --- a/keyboards/doro67/multi/keymaps/konstantin/config.h +++ b/keyboards/doro67/multi/keymaps/konstantin/config.h @@ -1,6 +1,4 @@ #pragma once -#define DYNAMIC_KEYMAP_LAYER_COUNT 3 - #define LAYER_FN #define LAYER_NUMPAD diff --git a/keyboards/doro67/multi/keymaps/konstantin/rules.mk b/keyboards/doro67/multi/keymaps/konstantin/rules.mk index 9abe619154..10ff0bc915 100644 --- a/keyboards/doro67/multi/keymaps/konstantin/rules.mk +++ b/keyboards/doro67/multi/keymaps/konstantin/rules.mk @@ -1,5 +1,5 @@ # Generic features -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes COMMAND_ENABLE = yes CONSOLE_ENABLE = yes EXTRAKEY_ENABLE = yes diff --git a/keyboards/dz60/keymaps/konstantin_b/rules.mk b/keyboards/dz60/keymaps/konstantin_b/rules.mk index 6006b7263c..c1eb43da2c 100644 --- a/keyboards/dz60/keymaps/konstantin_b/rules.mk +++ b/keyboards/dz60/keymaps/konstantin_b/rules.mk @@ -1,13 +1,21 @@ -BACKLIGHT_ENABLE = no -BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite +USER_NAME := konstantin + +# Generic features +BOOTMAGIC_ENABLE = yes COMMAND_ENABLE = yes CONSOLE_ENABLE = yes EXTRAKEY_ENABLE = yes MOUSEKEY_ENABLE = yes NKRO_ENABLE = yes -RGBLIGHT_ENABLE = no -SPACE_CADET_ENABLE = no TAP_DANCE_ENABLE = yes UNICODEMAP_ENABLE = no -USER_NAME = konstantin +# Keyboard-specific features +BACKLIGHT_ENABLE = no +RGBLIGHT_ENABLE = no +VIA_ENABLE = yes + +# Firmware size reduction +GRAVE_ESC_ENABLE = no +MAGIC_ENABLE = no +SPACE_CADET_ENABLE = no diff --git a/keyboards/evyd13/wasdat/keymaps/konstantin/config.h b/keyboards/evyd13/wasdat/keymaps/konstantin/config.h index 1d12c7db37..3c2583e2d4 100644 --- a/keyboards/evyd13/wasdat/keymaps/konstantin/config.h +++ b/keyboards/evyd13/wasdat/keymaps/konstantin/config.h @@ -1,6 +1,4 @@ #pragma once -#define DYNAMIC_KEYMAP_LAYER_COUNT 3 - #define LAYER_FN #define LAYER_NUMPAD diff --git a/keyboards/evyd13/wasdat/keymaps/konstantin/rules.mk b/keyboards/evyd13/wasdat/keymaps/konstantin/rules.mk index 2ae41e9423..f73ad286a1 100644 --- a/keyboards/evyd13/wasdat/keymaps/konstantin/rules.mk +++ b/keyboards/evyd13/wasdat/keymaps/konstantin/rules.mk @@ -1,5 +1,5 @@ # Generic features -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes COMMAND_ENABLE = yes CONSOLE_ENABLE = yes EXTRAKEY_ENABLE = yes diff --git a/keyboards/kbdfans/kbd6x/keymaps/konstantin/config.h b/keyboards/kbdfans/kbd6x/keymaps/konstantin/config.h index 37f4e42c71..4b511eb848 100644 --- a/keyboards/kbdfans/kbd6x/keymaps/konstantin/config.h +++ b/keyboards/kbdfans/kbd6x/keymaps/konstantin/config.h @@ -1,5 +1,3 @@ #pragma once -#define DYNAMIC_KEYMAP_LAYER_COUNT 3 - #define LAYER_FN diff --git a/keyboards/kbdfans/kbd6x/keymaps/konstantin/keymap.c b/keyboards/kbdfans/kbd6x/keymaps/konstantin/keymap.c index 304234a3f4..43bd06da9b 100644 --- a/keyboards/kbdfans/kbd6x/keymaps/konstantin/keymap.c +++ b/keyboards/kbdfans/kbd6x/keymaps/konstantin/keymap.c @@ -1,70 +1,38 @@ #include QMK_KEYBOARD_H #include "konstantin.h" -enum keycodes_keymap { - RCTRL = RANGE_KEYMAP, -}; - enum layers_keymap { L_RCTRL = LAYERS_KEYMAP, }; -void eeconfig_init_keymap(void) { - rgblight_sethsv(MODERN_DOLCH_RED); - rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL); -} - -bool indicator_light = false; - -bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case RGB_TOG ... RGB_SPD: - // Disable RGB controls when Fn/Caps indicator lights are on - if (indicator_light) { - return false; - } - // Shift+Toggle = reset RGB - if (record->event.pressed && keycode == RGB_TOG && get_mods() & MOD_MASK_SHIFT) { - eeconfig_init_keymap(); - return false; - } - break; - - // Combined RCtrl and layer - case RCTRL: - if (record->event.pressed) { - register_code(KC_RCTRL); - layer_on(L_RCTRL); - } else { - unregister_code(KC_RCTRL); - layer_off(L_RCTRL); - } - break; - } +enum keycodes_keymap { + RCTRL = RANGE_KEYMAP, +}; - return true; +static inline void reset_light(void) { + rgblight_mode(RGBLIGHT_MODE_RAINBOW_SWIRL); + rgblight_sethsv(MODERN_DOLCH_RED); } static inline void fn_light(void) { rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT); rgblight_sethsv_noeeprom(modern_dolch_red.h, modern_dolch_red.s, rgblight_get_val()); - indicator_light = true; } static inline void caps_light(void) { rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT); rgblight_sethsv_noeeprom(modern_dolch_cyan.h, modern_dolch_cyan.s, rgblight_get_val()); - indicator_light = true; } static inline void restore_light(void) { rgblight_config_t saved = { .raw = eeconfig_read_rgblight() }; - rgblight_sethsv_noeeprom(saved.hue, saved.sat, saved.val); rgblight_mode_noeeprom(saved.mode); - indicator_light = false; + rgblight_sethsv_noeeprom(saved.hue, saved.sat, saved.val); } -static void check_light_layer(uint32_t state) { +static bool last_checked_layer; + +static void check_light_layer(layer_state_t state) { if (IS_LAYER_ON_STATE(state, L_FN)) { fn_light(); } else if (IS_HOST_LED_ON(USB_LED_CAPS_LOCK)) { @@ -72,22 +40,34 @@ static void check_light_layer(uint32_t state) { } else { restore_light(); } + last_checked_layer = true; } -static void check_light_led(uint8_t usb_led) { - if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) { +static void check_light_led(uint8_t leds) { + if (IS_LED_ON(leds, USB_LED_CAPS_LOCK)) { caps_light(); } else if (IS_LAYER_ON(L_FN)) { fn_light(); } else { restore_light(); } + last_checked_layer = false; +} + +static void inline check_light(void) { + last_checked_layer + ? check_light_layer(layer_state) + : check_light_led(host_keyboard_leds()); +} + +void eeconfig_init_keymap(void) { + reset_light(); } static bool skip_led = false; -uint32_t layer_state_set_keymap(uint32_t state) { - static uint32_t prev_state = L_BASE; +layer_state_t layer_state_set_keymap(layer_state_t state) { + static layer_state_t prev_state = L_BASE; if (IS_LAYER_ON_STATE(state, L_FN) != IS_LAYER_ON_STATE(prev_state, L_FN)) { check_light_layer(state); // Fn state changed since last time skip_led = IS_LAYER_ON_STATE(state, L_FN); @@ -104,6 +84,37 @@ void led_set_keymap(uint8_t usb_led) { check_light_led(usb_led); } +bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case RGB_TOG ... RGB_SPD: + if (record->event.pressed) { + // Shift+Toggle = reset RGB + if (keycode == RGB_TOG && get_mods() & MOD_MASK_SHIFT) { + reset_light(); + return false; + } + restore_light(); + } else { + check_light(); + } + break; + + // Combined RCtrl and layer + // Cannot use LM(L_RCTRL, MOD_RCTL) because it sends LCtrl instead of RCtrl + case RCTRL: + if (record->event.pressed) { + register_code(KC_RCTRL); + layer_on(L_RCTRL); + } else { + unregister_code(KC_RCTRL); + layer_off(L_RCTRL); + } + break; + } + + return true; +} + const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Base layer * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ @@ -157,7 +168,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤ * │ │RTg│RV-│RV+│RMd│ │ │ │ │ │ │ │ │ * └─────┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴───┴──┬┴───┴┬───┬─┴───┘ - * │DPR│DstNA│ │ │ │ + * │DPR│DstNA│ │RGui │ │ * └───┴─────┴───────────────────────────┴─────┴───┘ */ [L_RCTRL] = LAYOUT( @@ -165,6 +176,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, TOP, MV_UP, BOTTOM, TAB_PRV, _______, _______, _______, _______, _______, _______, _______, _______, DEL_NXT, _______, MV_LEFT, MV_DOWN, MV_RGHT, TAB_NXT, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_TOG, RGB_VAD, RGB_VAI, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, _______, - XXXXXXX, DST_P_R, DST_N_A, _______, _______, _______, XXXXXXX + XXXXXXX, DST_P_R, DST_N_A, _______, KC_RGUI, _______, XXXXXXX ), }; diff --git a/keyboards/kbdfans/kbd6x/keymaps/konstantin/rules.mk b/keyboards/kbdfans/kbd6x/keymaps/konstantin/rules.mk index 0f7f72f342..cff02d7c5b 100644 --- a/keyboards/kbdfans/kbd6x/keymaps/konstantin/rules.mk +++ b/keyboards/kbdfans/kbd6x/keymaps/konstantin/rules.mk @@ -1,7 +1,7 @@ # Generic features -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes COMMAND_ENABLE = yes -CONSOLE_ENABLE = no +CONSOLE_ENABLE = yes EXTRAKEY_ENABLE = yes MOUSEKEY_ENABLE = yes NKRO_ENABLE = yes diff --git a/keyboards/melody96/keymaps/konstantin/rules.mk b/keyboards/melody96/keymaps/konstantin/rules.mk index e02c6c7b19..816ece7b26 100644 --- a/keyboards/melody96/keymaps/konstantin/rules.mk +++ b/keyboards/melody96/keymaps/konstantin/rules.mk @@ -1,5 +1,5 @@ # Generic features -BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes COMMAND_ENABLE = yes CONSOLE_ENABLE = yes EXTRAKEY_ENABLE = yes @@ -11,6 +11,7 @@ UNICODEMAP_ENABLE = yes # Keyboard-specific features BACKLIGHT_ENABLE = no RGBLIGHT_ENABLE = yes +VIA_ENABLE = yes # Firmware size reduction GRAVE_ESC_ENABLE = no diff --git a/keyboards/whitefox/keymaps/konstantin/rules.mk b/keyboards/whitefox/keymaps/konstantin/rules.mk index bb327cf267..afdeb979e8 100644 --- a/keyboards/whitefox/keymaps/konstantin/rules.mk +++ b/keyboards/whitefox/keymaps/konstantin/rules.mk @@ -1,5 +1,5 @@ # Generic features -BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes COMMAND_ENABLE = yes CONSOLE_ENABLE = yes EXTRAKEY_ENABLE = yes diff --git a/users/konstantin/config.h b/users/konstantin/config.h index 2629cdd570..d429452363 100644 --- a/users/konstantin/config.h +++ b/users/konstantin/config.h @@ -1,3 +1,19 @@ +/* Copyright 2019-2021 Konstantin Đorđević + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + #pragma once // Keyboard reports @@ -24,7 +40,7 @@ // Tapping #define PERMISSIVE_HOLD #define TAPPING_TERM 200 -#define TAPPING_TOGGLE 3 +#define TAPPING_TOGGLE 2 // Unicode #define UNICODE_CYCLE_PERSIST false diff --git a/users/konstantin/konstantin.c b/users/konstantin/konstantin.c index 3fdf5a4ca9..5d80877f0e 100644 --- a/users/konstantin/konstantin.c +++ b/users/konstantin/konstantin.c @@ -1,3 +1,19 @@ +/* Copyright 2019-2021 Konstantin Đorđević + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + #include "konstantin.h" __attribute__((weak)) @@ -21,6 +37,41 @@ void keyboard_post_init_user(void) { keyboard_post_init_keymap(); } +__attribute__((weak)) +layer_state_t layer_state_set_keymap(layer_state_t state) { + return state; +} + +layer_state_t layer_state_set_user(layer_state_t state) { + state = layer_state_set_keymap(state); + +#ifdef LAYER_NUMPAD + bool numpad = IS_LAYER_ON_STATE(state, L_NUMPAD); + bool num_lock = IS_HOST_LED_ON(USB_LED_NUM_LOCK); + if (numpad != num_lock) { + tap_code(KC_NLCK); // Toggle Num Lock to match Numpad layer state + } +#endif + + return state; +} + +__attribute__((weak)) +void led_set_keymap(uint8_t usb_led) {} + +void led_set_user(uint8_t usb_led) { + led_set_keymap(usb_led); +} + +__attribute__((weak)) +bool led_update_keymap(led_t led_state) { + return true; +} + +bool led_update_user(led_t led_state) { + return led_update_keymap(led_state); +} + __attribute__((weak)) bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { return true; @@ -91,38 +142,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { return true; } - -__attribute__((weak)) -uint32_t layer_state_set_keymap(uint32_t state) { - return state; -} - -layer_state_t layer_state_set_user(layer_state_t state) { - state = layer_state_set_keymap(state); - -#ifdef LAYER_NUMPAD - bool numpad = IS_LAYER_ON_STATE(state, L_NUMPAD); - bool num_lock = IS_HOST_LED_ON(USB_LED_NUM_LOCK); - if (numpad != num_lock) { - tap_code(KC_NLCK); // Toggle Num Lock to match Numpad layer state - } -#endif - - return state; -} - -__attribute__((weak)) -void led_set_keymap(uint8_t usb_led) {} - -void led_set_user(uint8_t usb_led) { - led_set_keymap(usb_led); -} - -__attribute__((weak)) -bool led_update_keymap(led_t led_state) { - return true; -} - -bool led_update_user(led_t led_state) { - return led_update_keymap(led_state); -} diff --git a/users/konstantin/konstantin.h b/users/konstantin/konstantin.h index 249b3fe15b..7da1dbfd21 100644 --- a/users/konstantin/konstantin.h +++ b/users/konstantin/konstantin.h @@ -1,3 +1,19 @@ +/* Copyright 2019-2021 Konstantin Đorđević + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + #pragma once #include "quantum.h" @@ -56,14 +72,6 @@ set_mods(mods); \ } -enum keycodes_user { - CLEAR = SAFE_RANGE, - DST_P_R, - DST_N_A, - - RANGE_KEYMAP, -}; - enum layers_user { L_BASE, #ifdef LAYER_FN @@ -76,11 +84,21 @@ enum layers_user { LAYERS_KEYMAP, }; +enum keycodes_user { + CLEAR = SAFE_RANGE, + DST_P_R, + DST_N_A, + + RANGE_KEYMAP, +}; + void keyboard_pre_init_keymap(void); void eeconfig_init_keymap(void); void keyboard_post_init_keymap(void); -bool process_record_keymap(uint16_t keycode, keyrecord_t *record); -uint32_t layer_state_set_keymap(uint32_t state); -void led_set_keymap(uint8_t usb_led); -bool led_update_keymap(led_t led_state); +layer_state_t layer_state_set_keymap(layer_state_t state); + +void led_set_keymap(uint8_t usb_led); +bool led_update_keymap(led_t led_state); + +bool process_record_keymap(uint16_t keycode, keyrecord_t *record); diff --git a/users/konstantin/post_config.h b/users/konstantin/post_config.h new file mode 100644 index 0000000000..3199b2124f --- /dev/null +++ b/users/konstantin/post_config.h @@ -0,0 +1,22 @@ +/* Copyright 2021 Konstantin Đorđević + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +// VIA +#ifndef DYNAMIC_KEYMAP_LAYER_COUNT + #define DYNAMIC_KEYMAP_LAYER_COUNT 3 +#endif diff --git a/users/konstantin/rgb.c b/users/konstantin/rgb.c index fffa250f25..2eeef829b0 100644 --- a/users/konstantin/rgb.c +++ b/users/konstantin/rgb.c @@ -1,3 +1,19 @@ +/* Copyright 2019-2021 Konstantin Đorđević + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + #include "rgb.h" #ifdef RGBLIGHT_EFFECT_BREATHING diff --git a/users/konstantin/rgb.h b/users/konstantin/rgb.h index e09c5bd774..3425dcb069 100644 --- a/users/konstantin/rgb.h +++ b/users/konstantin/rgb.h @@ -1,3 +1,19 @@ +/* Copyright 2019-2021 Konstantin Đorđević + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + #pragma once #include "quantum.h" diff --git a/users/konstantin/tap_dance.c b/users/konstantin/tap_dance.c index 4ec8caa63f..57a29d98b8 100644 --- a/users/konstantin/tap_dance.c +++ b/users/konstantin/tap_dance.c @@ -1,3 +1,19 @@ +/* Copyright 2019-2021 Konstantin Đorđević + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + #include "tap_dance.h" #include "konstantin.h" diff --git a/users/konstantin/tap_dance.h b/users/konstantin/tap_dance.h index 56889a19ef..047662a8e9 100644 --- a/users/konstantin/tap_dance.h +++ b/users/konstantin/tap_dance.h @@ -1,3 +1,19 @@ +/* Copyright 2019-2021 Konstantin Đorđević + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + #pragma once #include "quantum.h" diff --git a/users/konstantin/unicode.c b/users/konstantin/unicode.c index 8ef5aaa1ec..4eae716afd 100644 --- a/users/konstantin/unicode.c +++ b/users/konstantin/unicode.c @@ -1,3 +1,19 @@ +/* Copyright 2019-2021 Konstantin Đorđević + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + #include "unicode.h" #ifdef UNICODEMAP_ENABLE diff --git a/users/konstantin/unicode.h b/users/konstantin/unicode.h index b2616d120b..1a1eb60894 100644 --- a/users/konstantin/unicode.h +++ b/users/konstantin/unicode.h @@ -1,3 +1,19 @@ +/* Copyright 2019-2021 Konstantin Đorđević + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + #pragma once #include "quantum.h" From 4e7801d4fbcdf571bc7a73d5f5234321480affb0 Mon Sep 17 00:00:00 2001 From: peott-fr <70998091+peott-fr@users.noreply.github.com> Date: Sun, 19 Sep 2021 11:52:37 -0700 Subject: [PATCH 043/595] [Keymap] Adding my Mun keymap. (#14501) --- keyboards/rgbkb/mun/keymaps/peott-fr/config.h | 23 ++++++ keyboards/rgbkb/mun/keymaps/peott-fr/keymap.c | 81 +++++++++++++++++++ 2 files changed, 104 insertions(+) create mode 100644 keyboards/rgbkb/mun/keymaps/peott-fr/config.h create mode 100644 keyboards/rgbkb/mun/keymaps/peott-fr/keymap.c diff --git a/keyboards/rgbkb/mun/keymaps/peott-fr/config.h b/keyboards/rgbkb/mun/keymaps/peott-fr/config.h new file mode 100644 index 0000000000..9719d17437 --- /dev/null +++ b/keyboards/rgbkb/mun/keymaps/peott-fr/config.h @@ -0,0 +1,23 @@ +/* + * ---------------------------------------------------------------------------- + * "THE BEER-WARE LICENSE" (Revision 42): + * wrote this file. As long as you retain this + * notice you can do whatever you want with this stuff. If we meet some day, and + * you think this stuff is worth it, you can buy me a beer in return. David Rauseo + * ---------------------------------------------------------------------------- + */ + +#pragma once + +// No need for the single versions when multi performance isn't a problem =D +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define DISABLE_RGB_MATRIX_SPLASH +#define DISABLE_RGB_MATRIX_SOLID_SPLASH + +// 20m timeout (20m * 60s * 1000mil) +// #define RGB_DISABLE_TIMEOUT 1200000 +#define RGB_DISABLE_WHEN_USB_SUSPENDED + +#define STM32_ONBOARD_EEPROM_SIZE 2048 diff --git a/keyboards/rgbkb/mun/keymaps/peott-fr/keymap.c b/keyboards/rgbkb/mun/keymaps/peott-fr/keymap.c new file mode 100644 index 0000000000..66eaa144ec --- /dev/null +++ b/keyboards/rgbkb/mun/keymaps/peott-fr/keymap.c @@ -0,0 +1,81 @@ +/* + * ---------------------------------------------------------------------------- + * "THE BEER-WARE LICENSE" (Revision 42): + * wrote this file. As long as you retain this + * notice you can do whatever you want with this stuff. If we meet some day, and + * you think this stuff is worth it, you can buy me a beer in return. David Rauseo + * ---------------------------------------------------------------------------- + */ + +#include QMK_KEYBOARD_H +#include "common_oled.h" + +enum keymap_layers { + _BASE, + _LHAND, + _FUNC +}; + +//Layers and special keys. +#define SPC_LHND LT(_LHAND, KC_SPC) +#define BSP_FUNC LT(_FUNC, KC_BSPC) +#define DEL_FUNC LT(_FUNC, KC_DEL) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* QWERTY + * .--------------------------------------------------------------. .--------------------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | ` | | = | 6 | 7 | 8 | 9 | 0 | - | + * |--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| + * | Tab | Q | W | E | R | T | [ | | ] | Y | U | I | O | P | \ | + * |--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| + * | LCtrl | A | S | D | F | G | Home | | End | H | J | K | L | : | ' | + * |--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| + * | Shift/(| Z | X | C | V | B | Play | | Mute | N | M | , | . | / | Shift/)| + * |--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| + * | LCtrl | Win | Alt | MO(3) | L2/Del | Space | Space | | Bcksp | Bcksp | Left | Down | Up | Right | Ctrl | + * '--------+--------+--------+--------+--------+--------+--------' '--------+--------+--------+--------+--------+--------+--------' + * Encoder 1 Encoder 2 Encoder 3 Encoder 4 + * .-----------------------------------. .-----------------------------------. + * | VolUp | VolDn | VolUp | VolDn | | PgUp | PgDn | PgUp | PgDn | + * |--------+--------+--------+--------+--------. .--------+--------+--------+--------+--------| + * | VolDn | VolUp | Next | Play | Prev | Touch Encoder Touch Encoder | RgbHuI | RgbHuD | RgbMdD | RgbTog | RgbMdI | + * '--------+--------+--------+--------+--------' '--------+--------+--------+--------+--------' + */ + [_BASE] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_GRV, KC_EQL, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_LBRC, KC_RBRC, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_HOME, KC_END, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_MPLY, KC_MUTE, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, + KC_LCTL, KC_LGUI, KC_LALT, MO(3), DEL_FUNC, SPC_LHND, SPC_LHND, BSP_FUNC, BSP_FUNC, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_RCTL, + // Here we have the encoder setup. Encoder 0 clockwise, Encoder 0 counter-clockwise, Encoder 1 clockwise, Encoder 1 counter-clockwise , then right side + KC_VOLU, KC_VOLD, KC_VOLU, KC_VOLD, KC_PGDN, KC_PGUP, KC_PGDN, KC_PGUP, KC_VOLD, KC_VOLU, KC_MNXT, KC_MPLY, KC_MPRV, RGB_HUI, RGB_HUD, RGB_RMOD, RGB_TOG, RGB_MOD + ), + [_LHAND] = LAYOUT( + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F11, KC_F12, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_PGUP, KC_PGDN, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, + KC_LSFT, KC_CALC, KC_MYCM, KC_TRNS, KC_ENT, KC_BSPC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, KC_END, KC_PGDN, KC_RSFT, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_PGUP, KC_END, KC_TRNS, + // Encoders. + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [_FUNC] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI, RESET, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + // Encoders. + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + // Placeholder layer! + [3] = LAYOUT( + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + // Encoders. + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO + ) +}; \ No newline at end of file From 53c2f677481f8531adc755e7f2c4163c6eb006b8 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Sun, 19 Sep 2021 18:52:54 +0000 Subject: [PATCH 044/595] cKeys theDora Refactor (#14495) --- keyboards/ckeys/thedora/info.json | 34 +-- .../ckeys/thedora/keymaps/default/config.h | 3 - .../ckeys/thedora/keymaps/default/keymap.c | 278 +++++++++--------- .../ckeys/thedora/keymaps/default/readme.md | 1 - keyboards/ckeys/thedora/readme.md | 6 +- keyboards/ckeys/thedora/rules.mk | 23 +- keyboards/ckeys/thedora/thedora.c | 30 ++ keyboards/ckeys/thedora/thedora.h | 38 ++- 8 files changed, 237 insertions(+), 176 deletions(-) delete mode 100755 keyboards/ckeys/thedora/keymaps/default/config.h delete mode 100755 keyboards/ckeys/thedora/keymaps/default/readme.md diff --git a/keyboards/ckeys/thedora/info.json b/keyboards/ckeys/thedora/info.json index 4549ff61db..631da8f26e 100644 --- a/keyboards/ckeys/thedora/info.json +++ b/keyboards/ckeys/thedora/info.json @@ -3,32 +3,32 @@ "url": "https://ckeys.org/slides/exboard", "maintainer": "brandenbyers", "layouts": { - "LAYOUT_ortho_4x5": { + "LAYOUT": { "layout": [ {"label":"k00", "x":1, "y":0}, {"label":"k01", "x":2, "y":0}, {"label":"k02", "x":3, "y":0}, {"label":"k03", "x":4, "y":0}, {"label":"k04", "x":5, "y":0}, - {"label":"k05 (Rotary Push)", "x":0, "y":3}, - {"label":"k06", "x":1, "y":1}, - {"label":"k07", "x":2, "y":1}, - {"label":"k08", "x":3, "y":1}, - {"label":"k09", "x":4, "y":1}, - {"label":"k10", "x":5, "y":1}, + {"label":"k10", "x":1, "y":1}, + {"label":"k11", "x":2, "y":1}, + {"label":"k12", "x":3, "y":1}, + {"label":"k13", "x":4, "y":1}, + {"label":"k14", "x":5, "y":1}, - {"label":"k11", "x":1, "y":2}, - {"label":"k12", "x":2, "y":2}, - {"label":"k13", "x":3, "y":2}, - {"label":"k14", "x":4, "y":2}, - {"label":"k15", "x":5, "y":2}, + {"label":"k20", "x":1, "y":2}, + {"label":"k21", "x":2, "y":2}, + {"label":"k22", "x":3, "y":2}, + {"label":"k23", "x":4, "y":2}, + {"label":"k24", "x":5, "y":2}, - {"label":"k16", "x":1, "y":3}, - {"label":"k17", "x":2, "y":3}, - {"label":"k18", "x":3, "y":3}, - {"label":"k19", "x":4, "y":3}, - {"label":"k20", "x":5, "y":3} + {"label":"k05 (Rotary Push)", "x":0, "y":3}, + {"label":"k30", "x":1, "y":3}, + {"label":"k31", "x":2, "y":3}, + {"label":"k32", "x":3, "y":3}, + {"label":"k33", "x":4, "y":3}, + {"label":"k34", "x":5, "y":3} ] } } diff --git a/keyboards/ckeys/thedora/keymaps/default/config.h b/keyboards/ckeys/thedora/keymaps/default/config.h deleted file mode 100755 index 507a9ccdca..0000000000 --- a/keyboards/ckeys/thedora/keymaps/default/config.h +++ /dev/null @@ -1,3 +0,0 @@ -#pragma once - -// Add overrides here diff --git a/keyboards/ckeys/thedora/keymaps/default/keymap.c b/keyboards/ckeys/thedora/keymaps/default/keymap.c index 783475eb0a..e2ce9b0d73 100755 --- a/keyboards/ckeys/thedora/keymaps/default/keymap.c +++ b/keyboards/ckeys/thedora/keymaps/default/keymap.c @@ -1,156 +1,172 @@ +/* Copyright 2019 Branden Byers (@brandenbyers) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + #include QMK_KEYBOARD_H enum layers { - _BASE, // base layer - _MUSIC, // music mode - _MIDI, // midi mode - _MOUSE, // mouse keys - _ADMIN // admin duties + _BASE, // base layer + _MUSIC, // music mode + _MIDI, // midi mode + _MOUSE, // mouse keys + _ADMIN // admin duties }; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -// ┌─────────┬─────────┬─────────┬─────────┬─────────┐ -// │ │ │ │ │ │ -// │ 7 │ 8 │ 9 │ / │ ADMIN │ -// ROTORY │ │ │ │ │ │ -// RIGHT: ├─────────┼─────────┼─────────┼─────────┼─────────┤ -// VOL UP │ │ │ │ │ │ -// │ 4 │ 5 │ 6 │ * │ MOUSE │ -// ROTORY │ │ │ │ │ │ -// LEFT: ├─────────┼─────────┼─────────┼─────────┼─────────┤ -// VOL DOWN │ │ │ │ │ │ -// │ 1 │ 2 │ 3 │ - │ MIDI │ -// │ │ │ │ │ │ -// ┌─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤ -// │ TOGGLE │ │ │ │ │ │ -// │ MUSIC │ 0 │ . │ = │ + │ MUSIC │ -// │ │ │ │ │ │ │ -// └─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘ + // ┌─────────┬─────────┬─────────┬─────────┬─────────┐ + // │ │ │ │ │ │ + // │ 7 │ 8 │ 9 │ / │ ADMIN │ + // ROTARY │ │ │ │ │ │ + // RIGHT: ├─────────┼─────────┼─────────┼─────────┼─────────┤ + // PAGE DOWN│ │ │ │ │ │ + // │ 4 │ 5 │ 6 │ * │ MOUSE │ + // ROTARY │ │ │ │ │ │ + // LEFT: ├─────────┼─────────┼─────────┼─────────┼─────────┤ + // PAGE UP │ │ │ │ │ │ + // │ 1 │ 2 │ 3 │ - │ MIDI │ + // │ │ │ │ │ │ + // ┌─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤ + // │ TOGGLE │ │ │ │ │ │ + // │ MUSIC │ 0 │ . │ = │ + │ MUSIC │ + // │ │ │ │ │ │ │ + // └─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘ - [_BASE] = LAYOUT( - KC_KP_7, KC_KP_8, KC_KP_9, KC_PSLS, MO(_ADMIN), MU_TOG, - KC_KP_4, KC_KP_5, KC_KP_6, KC_PAST, TG(_MOUSE), - KC_KP_1, KC_KP_2, KC_KP_3, KC_PMNS, TG(_MIDI), - KC_KP_0, KC_KP_DOT, KC_KP_EQUAL, KC_PPLS, MO(_MUSIC) - ), + [_BASE] = LAYOUT( + KC_P7, KC_P8 , KC_P9 , KC_PSLS, MO(_ADMIN), + KC_P4, KC_P5 , KC_P6 , KC_PAST, TG(_MOUSE), + KC_P1, KC_P2 , KC_P3 , KC_PMNS, TG(_MIDI), + MU_TOG, KC_P0, KC_PDOT, KC_PEQL, KC_PPLS, MO(_MUSIC) + ), -// MUSIC LAYER - // ┌─────────┬─────────┬─────────┬─────────┬─────────┐ - // │ │ │ │ │ │ - // │ │ │ │ │ │ - // ROTORY │ │ │ │ │ │ - // RIGHT: ├─────────┼─────────┼─────────┼─────────┼─────────┤ - // PAGE UP │ │ │ │ │ │ - // │ │ │ │ │ │ - // ROTORY │ │ │ │ │ │ - // LEFT: ├─────────┼─────────┼─────────┼─────────┼─────────┤ - // PAGE DOWN│ │ │ │ │ │ - // │ │ │ │ MODE │ │ - // │ │ │ │ │ │ - //┌─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤ - //│ │ │ │ │ │ │ - //│ │ RECORD │ STOP │ │ PLAY │ │ - //│ │ │ │ │ │ │ - //└─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘ + // MUSIC LAYER + // ┌─────────┬─────────┬─────────┬─────────┬─────────┐ + // │ │ │ │ │ │ + // │ │ │ │ │ │ + // ROTARY │ │ │ │ │ │ + // RIGHT: ├─────────┼─────────┼─────────┼─────────┼─────────┤ + // PAGE DOWN│ │ │ │ │ │ + // │ │ │ │ │ │ + // ROTARY │ │ │ │ │ │ + // LEFT: ├─────────┼─────────┼─────────┼─────────┼─────────┤ + // PAGE UP │ │ │ │ │ │ + // │ │ │ │ MODE │ │ + // │ │ │ │ │ │ + // ┌─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤ + // │ │ │ │ │ │ │ + // │ │ RECORD │ STOP │ │ PLAY │ │ + // │ │ │ │ │ │ │ + // └─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘ - [_MUSIC] = LAYOUT( - _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, - _______, _______, _______, _______, MU_MOD, - KC_LCTL, KC_LALT, _______, KC_LGUI, _______ - ), + [_MUSIC] = LAYOUT( + _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, + _______, _______, _______, _______, MU_MOD, + _______, KC_LCTL, KC_LALT, _______, KC_LGUI, _______ + ), -// MIDI LAYER -// ┌─────────┬─────────┬─────────┬─────────┬─────────┐ -// │ │ │ │ │ │ -// │ D♯ │ E │ F │ F♯ │ G │ -// ROTORY │ │ │ │ │ │ -// RIGHT: ├─────────┼─────────┼─────────┼─────────┼─────────┤ -// PAGE UP │ │ │ │ │ │ -// │ A♯ │ B │ C │ C♯ │ D │ -// ROTORY │ │ │ │ │ │ -// LEFT: ├─────────┼─────────┼─────────┼─────────┼─────────┤ -// PAGE DOWN│ │ │ │ │ │ -// │ F │ F♯ │ G │ G♯ │ A │ -// │ │ │ │ │ │ -// ┌─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤ -// │ │ │ │ │ │ │ -// │ │ C │ C♯ │ D │ D♯ │ E │ -// │ │ │ │ │ │ │ -// └─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘ + // MIDI LAYER + // ┌─────────┬─────────┬─────────┬─────────┬─────────┐ + // │ │ │ │ │ │ + // │ D♯ │ E │ F │ F♯ │ G │ + // ROTARY │ │ │ │ │ │ + // RIGHT: ├─────────┼─────────┼─────────┼─────────┼─────────┤ + // PAGE DOWN│ │ │ │ │ │ + // │ A♯ │ B │ C │ C♯ │ D │ + // ROTARY │ │ │ │ │ │ + // LEFT: ├─────────┼─────────┼─────────┼─────────┼─────────┤ + // PAGE UP │ │ │ │ │ │ + // │ F │ F♯ │ G │ G♯ │ A │ + // │ │ │ │ │ │ + // ┌─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤ + // │ │ │ │ │ │ │ + // │ │ C │ C♯ │ D │ D♯ │ E │ + // │ │ │ │ │ │ │ + // └─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘ - [_MIDI] = LAYOUT( - MI_Ds_3, MI_E_3, MI_F_3, MI_Fs_3, MI_G_3, _______, - MI_As_2, MI_B_2, MI_C_3, MI_Cs_3, MI_D_3, - MI_F_2, MI_Fs_2, MI_G_2, MI_Gs_2, TG(_MIDI), - MI_C_2, MI_Cs_2, MI_D_2, MI_Ds_2, MI_E_2 - ), + [_MIDI] = LAYOUT( + MI_Ds_3, MI_E_3, MI_F_3, MI_Fs_3, MI_G_3, + MI_As_2, MI_B_2, MI_C_3, MI_Cs_3, MI_D_3, + MI_F_2, MI_Fs_2, MI_G_2, MI_Gs_2, TG(_MIDI), + _______, MI_C_2, MI_Cs_2, MI_D_2, MI_Ds_2, MI_E_2 + ), -// MOUSE LAYER -// ┌─────────┬─────────┬─────────┬─────────┬─────────┐ -// │ │ │ │ │ │ -// │ BTN 5 │ │ WHEEL │ │ │ -// ROTORY │ │ │ UP │ │ │ -// RIGHT: ├─────────┼─────────┼─────────┼─────────┼─────────┤ -// PAGE DOWN│ │ │ │ │ │ -// │ │ LEFT │ MOUSE │ RIGHT │ │ -// ROTORY │ │ CLICK │ UP │ CLICK │ │ -// LEFT: ├─────────┼─────────┼─────────┼─────────┼─────────┤ -// PAGE UP │ │ │ │ │ │ -// │ BTN 4 │ MOUSE │ MOUSE │ MOUSE │ │ -// │ │ LEFT │ DOWN │ RIGHT │ │ -// ┌─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤ -// │ │ │ │ │ │ │ -// │ │ BTN 3 │ WHEEL │ WHEEL │ WHEEL │ │ -// │ │ │ LEFT │ DOWN │ RIGHT │ │ -// └─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘ + // MOUSE LAYER + // ┌─────────┬─────────┬─────────┬─────────┬─────────┐ + // │ │ │ │ │ │ + // │ BTN 5 │ │ WHEEL │ │ │ + // ROTARY │ │ │ UP │ │ │ + // RIGHT: ├─────────┼─────────┼─────────┼─────────┼─────────┤ + // PAGE DOWN│ │ │ │ │ │ + // │ │ LEFT │ MOUSE │ RIGHT │ │ + // ROTARY │ │ CLICK │ UP │ CLICK │ │ + // LEFT: ├─────────┼─────────┼─────────┼─────────┼─────────┤ + // PAGE UP │ │ │ │ │ │ + // │ BTN 4 │ MOUSE │ MOUSE │ MOUSE │ │ + // │ │ LEFT │ DOWN │ RIGHT │ │ + // ┌─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤ + // │ │ │ │ │ │ │ + // │ │ BTN 3 │ WHEEL │ WHEEL │ WHEEL │ │ + // │ │ │ LEFT │ DOWN │ RIGHT │ │ + // └─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘ - [_MOUSE] = LAYOUT( - KC_MS_BTN5, _______, KC_MS_WH_UP, _______, _______, _______, - _______, KC_MS_BTN1, KC_MS_UP, KC_MS_BTN2, TG(_MOUSE), - KC_MS_BTN4, KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT, _______, - KC_MS_BTN3, KC_MS_WH_LEFT, KC_MS_WH_DOWN, KC_MS_WH_RIGHT, _______ - ), + [_MOUSE] = LAYOUT( + KC_BTN5, _______, KC_WH_U, _______, _______, + _______, KC_BTN1, KC_MS_U, KC_BTN2, TG(_MOUSE), + KC_BTN4, KC_MS_L, KC_MS_D, KC_MS_R, _______, + _______, KC_BTN3, KC_WH_L, KC_WH_D, KC_WH_R, _______ + ), -// ADMIN LAYER -// ┌─────────┬─────────┬─────────┬─────────┬─────────┐ -// │ │ │ │ │ │ -// │ RESET │ │ │ │ │ -// ROTORY │ │ │ │ │ │ -// RIGHT: ├─────────┼─────────┼─────────┼─────────┼─────────┤ -// PAGE UP │ │ │ │ │ │ -// │ 4 │ 5 │ 6 │ * │ │ -// ROTORY │ │ │ │ │ │ -// LEFT: ├─────────┼─────────┼─────────┼─────────┼─────────┤ -// PAGE DOWN│ │ │ │ │ │ -// │ 1 │ 2 │ 3 │ │ │ -// │ │ │ │ │ │ -// ┌─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤ -// │ │ │ │ │ │ │ -// │ │ 0 │ . │ = │ │ │ -// │ │ │ │ │ │ │ -// └─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘ + // ADMIN LAYER + // ┌─────────┬─────────┬─────────┬─────────┬─────────┐ + // │ │ │ │ │ │ + // │ RESET │ │ │ │ │ + // ROTARY │ │ │ │ │ │ + // RIGHT: ├─────────┼─────────┼─────────┼─────────┼─────────┤ + // PAGE DOWN│ │ │ │ │ │ + // │ 4 │ 5 │ 6 │ * │ │ + // ROTARY │ │ │ │ │ │ + // LEFT: ├─────────┼─────────┼─────────┼─────────┼─────────┤ + // PAGE UP │ │ │ │ │ │ + // │ 1 │ 2 │ 3 │ │ │ + // │ │ │ │ │ │ + // ┌─────────┼─────────┼─────────┼─────────┼─────────┼─────────┤ + // │ │ │ │ │ │ │ + // │ │ 0 │ . │ = │ │ │ + // │ │ │ │ │ │ │ + // └─────────┴─────────┴─────────┴─────────┴─────────┴─────────┘ - [_ADMIN] = LAYOUT( - RESET, _______, _______, _______, TG(_ADMIN), _______, - _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______ - ), + [_ADMIN] = LAYOUT( + RESET, _______, _______, _______, TG(_ADMIN), + _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______ + ), }; bool process_record_user(uint16_t keycode, keyrecord_t *record) { - return true; + return true; }; bool encoder_update_user(uint8_t index, bool clockwise) { - if (index == 0) { /* First encoder */ - if (clockwise) { - tap_code(KC_PGDN); - } else { - tap_code(KC_PGUP); + if (index == 0) { /* First encoder */ + if (clockwise) { + tap_code(KC_PGDN); + } else { + tap_code(KC_PGUP); + } } - } return true; } diff --git a/keyboards/ckeys/thedora/keymaps/default/readme.md b/keyboards/ckeys/thedora/keymaps/default/readme.md deleted file mode 100755 index 4594bdfe31..0000000000 --- a/keyboards/ckeys/thedora/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for the cKeys Handwire 101 4x4 keyboard. \ No newline at end of file diff --git a/keyboards/ckeys/thedora/readme.md b/keyboards/ckeys/thedora/readme.md index 991b5df02d..26233de3c7 100755 --- a/keyboards/ckeys/thedora/readme.md +++ b/keyboards/ckeys/thedora/readme.md @@ -4,9 +4,9 @@ A 4x5 keyboard with rotary encoder, QWIIC connector, and header pinouts for easy access to all pins on the Proton C. This keyboard was built for QMK exploration big and small. What will you discover next? -Keyboard Maintainer: [brandenbyers](https://github.com/brandenbyers) -Hardware Supported: theDora -Hardware Availability: [cKeys.org](https://ckeys.org) +* Keyboard Maintainer: [brandenbyers](https://github.com/brandenbyers) +* Hardware Supported: theDora +* Hardware Availability: [cKeys.org](https://ckeys.org) Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/ckeys/thedora/rules.mk b/keyboards/ckeys/thedora/rules.mk index 3feda75403..3aabafc953 100755 --- a/keyboards/ckeys/thedora/rules.mk +++ b/keyboards/ckeys/thedora/rules.mk @@ -6,17 +6,20 @@ BOARD = QMK_PROTON_C BOOTLOADER = stm32-dfu # Build Options -# comment out to disable the options. +# change yes to no to disable # -BACKLIGHT_ENABLE = no BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover -AUDIO_ENABLE = yes +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = yes # Audio output + MIDI_ENABLE = yes # MIDI support -RGBLIGHT_ENABLE = no ENCODER_ENABLE = yes diff --git a/keyboards/ckeys/thedora/thedora.c b/keyboards/ckeys/thedora/thedora.c index 68d0a9af51..58953f7437 100755 --- a/keyboards/ckeys/thedora/thedora.c +++ b/keyboards/ckeys/thedora/thedora.c @@ -1 +1,31 @@ +/* Copyright 2019 Branden Byers (@brandenbyers) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + #include "thedora.h" + +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { + return false; + } + if (index == 0) { + if (clockwise) { + tap_code(KC_PGDN); + } else { + tap_code(KC_PGUP); + } + } + return true; +} diff --git a/keyboards/ckeys/thedora/thedora.h b/keyboards/ckeys/thedora/thedora.h index 2c4443c3ad..5e66f67166 100755 --- a/keyboards/ckeys/thedora/thedora.h +++ b/keyboards/ckeys/thedora/thedora.h @@ -1,21 +1,37 @@ +/* Copyright 2019 Branden Byers (@brandenbyers) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + #pragma once #include "quantum.h" +#define XXX KC_NO + // This a shortcut to help you visually see your layout. -// The following is an example using the Planck MIT layout -// The first section contains all of the arguements +// The first section contains all of the arguments // The second converts the arguments into a two-dimensional array #define LAYOUT( \ - k00, k01, k02, k03, k04, k05, \ - k06, k07, k08, k09, k10, \ - k11, k12, k13, k14, k15, \ - k16, k17, k18, k19, k20 \ + k00, k01, k02, k03, k04, \ + k10, k11, k12, k13, k14, \ + k20, k21, k22, k23, k24, \ + k05, k30, k31, k32, k33, k34 \ ) \ { \ - { k00, k01, k02, k03, k04, k05, }, \ - { k06, k07, k08, k09, k10 }, \ - { k11, k12, k13, k14, k15 }, \ - { k16, k17, k18, k19, k20 } \ + { k00, k01, k02, k03, k04, k05 }, \ + { k10, k11, k12, k13, k14, XXX }, \ + { k20, k21, k22, k23, k24, XXX }, \ + { k30, k31, k32, k33, k34, XXX } \ } - From ddb6821b97c6d276e4190f98f49a4ee164fd0477 Mon Sep 17 00:00:00 2001 From: David Xia Date: Sun, 19 Sep 2021 14:53:22 -0400 Subject: [PATCH 045/595] [Docs] fix wrong directory for RGB Matrix animations (#14494) --- docs/feature_led_matrix.md | 9 +-------- docs/feature_rgb_matrix.md | 2 +- 2 files changed, 2 insertions(+), 9 deletions(-) diff --git a/docs/feature_led_matrix.md b/docs/feature_led_matrix.md index 7d7971bbed..ed92bffd99 100644 --- a/docs/feature_led_matrix.md +++ b/docs/feature_led_matrix.md @@ -244,14 +244,7 @@ static bool my_cool_effect2(effect_params_t* params) { #endif // LED_MATRIX_CUSTOM_EFFECT_IMPLS ``` -For inspiration and examples, check out the built-in effects under `quantum/led_matrix_animations/` - - - - - - - +For inspiration and examples, check out the built-in effects under `quantum/led_matrix/animations/`. ## Additional `config.h` Options :id=additional-configh-options diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md index 8d6bb934e5..2dbd32fbdb 100644 --- a/docs/feature_rgb_matrix.md +++ b/docs/feature_rgb_matrix.md @@ -562,7 +562,7 @@ static bool my_cool_effect2(effect_params_t* params) { #endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS ``` -For inspiration and examples, check out the built-in effects under `quantum/rgb_matrix_animations/` +For inspiration and examples, check out the built-in effects under `quantum/rgb_matrix/animations/`. ## Colors :id=colors From a068b14686507f67c7f0956d3367510bd9041641 Mon Sep 17 00:00:00 2001 From: Jakob Weickmann <57487288+jweickm@users.noreply.github.com> Date: Sun, 19 Sep 2021 20:53:47 +0200 Subject: [PATCH 046/595] [Keymap] Added my own keymap for MIT Planck (#14481) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- keyboards/planck/keymaps/jweickm/config.h | 69 ++ keyboards/planck/keymaps/jweickm/keymap.c | 1131 ++++++++++++++++++++ keyboards/planck/keymaps/jweickm/readme.md | 154 +++ keyboards/planck/keymaps/jweickm/rules.mk | 5 + 4 files changed, 1359 insertions(+) create mode 100644 keyboards/planck/keymaps/jweickm/config.h create mode 100644 keyboards/planck/keymaps/jweickm/keymap.c create mode 100644 keyboards/planck/keymaps/jweickm/readme.md create mode 100644 keyboards/planck/keymaps/jweickm/rules.mk diff --git a/keyboards/planck/keymaps/jweickm/config.h b/keyboards/planck/keymaps/jweickm/config.h new file mode 100644 index 0000000000..3b34ddf832 --- /dev/null +++ b/keyboards/planck/keymaps/jweickm/config.h @@ -0,0 +1,69 @@ +/* + * Copyright 2018 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#ifdef AUDIO_ENABLE + #define STARTUP_SONG SONG(PLANCK_SOUND) + // #define STARTUP_SONG SONG(NO_SOUND) + + #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \ + SONG(COLEMAK_SOUND), \ + SONG(DVORAK_SOUND), \ + SONG(WORKMAN_SOUND), \ + SONG(PLOVER_SOUND), \ + SONG(STARTUP_SOUND), \ + SONG(PREONIC_SOUND), \ + SONG(GOODBYE_SOUND), \ + } +#endif + +/* + * MIDI options + */ + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ + +#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + + +// Most tactile encoders have detents every 4 stages +#define ENCODER_RESOLUTION 4 + +// settings for HOME ROW MODS +#define TAPPING_TERM 160 // 200 ms is the default value +#define TAPPING_TERM_PER_KEY +//#define PERMISSIVE_HOLD +#define IGNORE_MOD_TAP_INTERRUPT +#define TAPPING_FORCE_HOLD_PER_KEY + +// settings for LEADER key +#define LEADER_PER_KEY_TIMING +#define LEADER_TIMEOUT 250 +#define LEADER_NO_TIMEOUT + +#define RGBLIGHT_SLEEP // RGB lighting will switch off when the host goes to sleep +#define RGBLIGHT_LAYERS diff --git a/keyboards/planck/keymaps/jweickm/keymap.c b/keyboards/planck/keymaps/jweickm/keymap.c new file mode 100644 index 0000000000..02138a876c --- /dev/null +++ b/keyboards/planck/keymaps/jweickm/keymap.c @@ -0,0 +1,1131 @@ +/* Copyright 2015-2017 Jack Humbert + * Copyright 2021 Jakob Weickmann + * + This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H +#include "muse.h" + +enum planck_layers { + _HRWIDECOLEMAK, + _HRWIDECOLEMAK_DE, + _GAMING, + _WIDECOLEMAK, + _LOWER, + _RAISE, + _LOWER_DE, + _RAISE_DE, + _ADJUST, + _NAV, + _VIM, + _NUM, + _MOUSE, +}; + +enum planck_keycodes { HRWIDECOLEMAK = SAFE_RANGE, GAMING, WIDECOLEMAK, TG_COLEMAK, VIM_O, VIM_V, KC_SVD_BD, KC_SVU_BU, KC_TAB_MPLY, ALT_TAB, CTL_TAB, DE_ae, DE_oe, DE_ue, DE_AE, DE_OE, DE_SZ, DE_EGRAVE, DE_EAIGU, KC_CURRENCY, KC_DE_SWITCH, LANG_SWITCH, DE_SLSH_QUST, DE_QUOT, DE_SCLN, DE_BSLS, M_ESCM, M_RGUI_SCLN, DE_DOT_RAB, DE_COMM_LAB }; + +// Tap Dance declarations +enum tap_dance_codes { + TD_PRN, // round brackets (parentheses) + TD_PRN_DE, // round brackets (parentheses) + TD_BRC, // square brackets + TD_BRC_DE, // square brackets + TD_CBR, // curly brackets + TD_CBR_DE, // curly brackets + TD_VIM_GG // single tap to scroll down, double tap to scroll up +}; + +#define LOWER MO(_LOWER) +#define RAISE MO(_RAISE) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* _HRWIDECOLEMAK + * ,-----------------------------------------------------------------------------------. + * | G-Q | A-W | S-F | C-P |_Num-B|Vol/B+|_Num-J| C-L | S-U | A-Y | G-/ | ü | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | A | R | S | T | G | TAB | M | N | E | I | O | ' | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |_Mo-Z | X | C | D | V |Vol/B-| K | H | , | . |_Mo-/ | \ | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |C-CAPS| LEAD | BSPC |_L-ESC| LSFT | _Nav-SPC |_R-ENT|S-DEL | RALT |_Mo <-|_Mo ->| + * `-----------------------------------------------------------------------------------' + */ + [_HRWIDECOLEMAK] = LAYOUT_planck_grid( + LGUI_T(KC_Q), LALT_T(KC_W), LSFT_T(KC_F), LCTL_T(KC_P), LT(_NUM, KC_B), KC_SVU_BU, LT(_NUM, KC_J), RCTL_T(KC_L), RSFT_T(KC_U), LALT_T(KC_Y), RGUI_T(KC_SCLN), DE_ue, + KC_A, KC_R, KC_S, KC_T, KC_G, KC_TAB, KC_M, KC_N, KC_E, KC_I, KC_O, KC_QUOT, + LT(_MOUSE, KC_Z), KC_X, KC_C, KC_D, KC_V, KC_SVD_BD, KC_K, KC_H, KC_COMM, KC_DOT, LT(_MOUSE, KC_SLSH), KC_BSLS, + LCTL_T(KC_CAPS), KC_LEAD, KC_BSPC, LT(_LOWER, KC_ESC), OSM(MOD_LSFT), LT(_NAV, KC_SPC), LT(_NAV, KC_SPC), LT(_RAISE, KC_ENT), RSFT_T(KC_DEL), KC_RALT, LT(_MOUSE, KC_LEFT), LT(_MOUSE, KC_RIGHT) + ), + + /* _HRWIDECOLEMAK_DE + * same as above, when the PC is set to German layout + * ,-----------------------------------------------------------------------------------. + * | G-Q | A-W | S-F | C-P |_Num-B|Vol/B+|_Num-J| C-L | S-U | A-Y | G-/ | ü | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | A | R | S | T | G | TAB | M | N | E | I | O | ' | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |_Mo-Z | X | C | D | V |Vol/B-| K | H | , | . |_Mo-/ | \ | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |C-CAPS| LEAD | BSPC |_L-ESC| LSFT | _Nav-SPC |_R-ENT|S-DEL | RALT |_Mo <-|_Mo ->| + * `-----------------------------------------------------------------------------------' + */ + [_HRWIDECOLEMAK_DE] = LAYOUT_planck_grid( + LGUI_T(KC_Q), LALT_T(KC_W), LSFT_T(KC_F), LCTL_T(KC_P), LT(_NUM, KC_B), KC_SVU_BU, LT(_NUM, KC_J), RCTL_T(KC_L), RSFT_T(KC_U), LALT_T(KC_Z), M_RGUI_SCLN, KC_LBRC, + KC_A, KC_R, KC_S, KC_T, KC_G, KC_TAB, KC_M, KC_N, KC_E, KC_I, KC_O, DE_QUOT, + LT(_MOUSE, KC_Y), KC_X, KC_C, KC_D, KC_V, KC_SVD_BD, KC_K, KC_H, DE_COMM_LAB, DE_DOT_RAB, DE_SLSH_QUST, DE_BSLS, + LCTL_T(KC_CAPS), KC_LEAD, KC_BSPC, LT(_LOWER_DE, KC_ESC), OSM(MOD_LSFT), LT(_NAV, KC_SPC), LT(_NAV, KC_SPC), LT(_RAISE_DE, KC_ENT), RSFT_T(KC_DEL), KC_RALT, LT(_MOUSE, KC_LEFT), LT(_MOUSE, KC_RIGHT) + ), + + /* _GAMING + * ,-----------------------------------------------------------------------------------. + * | ESC | 1 | 2 | 3 | 4 | 5 | 6 | 7 | F5 | F8 | F9 |Vol/B+| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | TAB | Q | W | E | R | T | Y | U | I | O | P |Vol/B-| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | LSFT | A | S | D | F | G | H | J | Z | M | ; |_CM-EN| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | LCTL | C | B | X | LALT | SPACE | ENT | RALT | ____ | ____ | !GAME| + * `-----------------------------------------------------------------------------------' + */ + [_GAMING] = LAYOUT_planck_grid( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_F5, KC_F8, KC_F9, KC_VOLU, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_VOLD, + KC_LSFT, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_Z, KC_M, KC_SCLN, TG_COLEMAK, + KC_LCTL, KC_C, KC_B, KC_X, KC_LALT, KC_SPC, KC_SPC, KC_ENT, KC_RALT, KC_TRNS, KC_TRNS, GAMING + ), + + /* WIDECOLEMAK + * no mod taps + * ,-----------------------------------------------------------------------------------. + * | Q | W | F | P | B |Vol/B+| J | L | U | Y | / | Ü | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | A | R | S | T | G | TAB | M | N | E | I | O | ' | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Z | X | C | D | V |Vol/B-| K | H | , | . | / |!CM-EN| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |C-CAPS|G-TAB |MN-ESC|_L-BSP| LSFT | _NAV-SPC |_R-ENT|S-DEL |C-TAB |_Mo <-|_Mo ->| + * `-----------------------------------------------------------------------------------' + */ + [_WIDECOLEMAK] = LAYOUT_planck_grid( + KC_Q, KC_W, KC_F, KC_P, KC_B, KC_SVU_BU, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, DE_ue, + KC_A, KC_R, KC_S, KC_T, KC_G, KC_TAB_MPLY, KC_M, KC_N, KC_E, KC_I, KC_O, KC_QUOT, + KC_Z, KC_X, KC_C, KC_D, KC_V, KC_SVD_BD, KC_K, KC_H, KC_COMM, KC_DOT, KC_SLSH, TG_COLEMAK, + LCTL_T(KC_CAPS), LGUI_T(KC_TAB), M_ESCM, LT(_LOWER_DE, KC_BSPC), OSM(MOD_LSFT), LT(_NAV, KC_SPC), LT(_NAV, KC_SPC), LT(_RAISE, KC_ENT), RSFT_T(KC_DEL), KC_LALT, LT(_MOUSE, KC_LEFT), LT(_MOUSE, KC_RIGHT) + ), + + /* _LOWER + * ,-----------------------------------------------------------------------------------. + * | ! | @ | # | $ | % | ~ | ^ | & | * | ( | ) | Ö | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | F1 | F2 | F3 | F4 | F5 | F6 | ß | _ | + | { | } | Ä | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | F7 | F8 | F9 | F10 | F11 | F12 | MPLY | / | \ | | | € | è | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |!MOUSE| ____ | ____ | ____ | ____ | ____ | ____ | Vol- | Vol+ | ↓ | ↑ | + * `-----------------------------------------------------------------------------------' + */ + [_LOWER] = LAYOUT_planck_grid( + KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_TILD, KC_CIRC, KC_AMPR, KC_ASTR, TD(TD_PRN), KC_RPRN, DE_OE, + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, DE_SZ, KC_UNDS, KC_PLUS, TD(TD_CBR), KC_RCBR, DE_AE, + KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_MPLY, KC_SLSH, KC_NUBS, LSFT(KC_NUBS), KC_CURRENCY, DE_EGRAVE, + TG(_MOUSE), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_DOWN, KC_UP + ), + + /* _LOWER_DE + * ,-----------------------------------------------------------------------------------. + * | ! | @ | # | $ | % | ~ | ^ | & | * | ( | ) | Ö | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | F1 | F2 | F3 | F4 | F5 | F6 | ß | _ | + | { | } | Ä | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | F7 | F8 | F9 | F10 | F11 | F12 | MPLY | / | \ | | | € | ` | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |!MOUSE| ____ | ____ | ____ | ____ | ____ | ____ | Vol- | Vol+ | ↓ | ↑ | + * `-----------------------------------------------------------------------------------' + */ + [_LOWER_DE] = LAYOUT_planck_grid( + KC_EXLM, RALT(KC_Q), KC_BSLS, KC_DLR, KC_PERC, RALT(KC_RBRC), KC_GRV, KC_CIRC, KC_RCBR, TD(TD_PRN_DE), KC_LPRN, LSFT(KC_SCLN), + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, LSFT(KC_SLSH), KC_RBRC, TD(TD_CBR_DE), RALT(KC_0), LSFT(KC_QUOT), + KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_MPLY, LSFT(KC_7), RALT(KC_MINS), RALT(KC_NUBS), KC_CURRENCY, KC_PLUS, + TG(_MOUSE), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_DOWN, KC_UP + ), + + /* _RAISE + * ,-----------------------------------------------------------------------------------. + * | 1 | 2 | 3 | 4 | 5 | ` | 6 | 7 | 8 | 9 | 0 | ö | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | F1 | F2 | F3 | F4 | F5 | F6 | ß | - | = | [ | ] | ä | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | F7 | F8 | F9 | F10 | F11 | F12 | MPLY | \ | , | . | / | é | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |!MOUSE| ____ | ____ | BSPC | ____ | ____ | ____ | |<< | >>| | ↓ | ↑ | + * `-----------------------------------------------------------------------------------' + */ + [_RAISE] = LAYOUT_planck_grid( + KC_1, KC_2, KC_3, KC_4, KC_5, KC_GRV, KC_6, KC_7, KC_8, KC_9, KC_0, DE_oe, + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, DE_SZ, KC_MINS, KC_EQL, TD(TD_BRC), KC_RBRC, DE_ae, + KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_MPLY, KC_BSLS, KC_COMM, KC_DOT, KC_SLSH, DE_EAIGU, + TG(_MOUSE), KC_TRNS, KC_BSPC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_DOWN, KC_UP + ), + + /* _RAISE_DE + * ,-----------------------------------------------------------------------------------. + * | 1 | 2 | 3 | 4 | 5 | ` | 6 | 7 | 8 | 9 | 0 | ö | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | F1 | F2 | F3 | F4 | F5 | F6 | ß | - | = | [ | ] | ä | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | F7 | F8 | F9 | F10 | F11 | F12 | MPLY | \ | , | . | / | ´ | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |!MOUSE| ____ | ____ | BSPC | ____ | ____ | ____ | |<< | >>| | ↓ | ↑ | + * `-----------------------------------------------------------------------------------' + */ + [_RAISE_DE] = LAYOUT_planck_grid( + KC_1, KC_2, KC_3, KC_4, KC_5, LSFT(KC_GRV), KC_6, KC_7, KC_8, KC_9, KC_0, KC_SCLN, + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_SLSH, LSFT(KC_0), TD(TD_BRC_DE), RALT(KC_9), KC_QUOT, + KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_MPLY, RALT(KC_MINS), KC_COMM, KC_DOT, DE_SLSH_QUST, KC_EQL, + TG(_MOUSE), KC_TRNS, KC_BSPC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_DOWN, KC_UP + ), + + /* _ADJUST + * ,-----------------------------------------------------------------------------------. + * | A-SFT| RESET| DEBUG|RGBTOG|RGBMOD|RGBHUI|RGBHUD|RGBSAI|RGBSAD|RGBVAI|RGBVAD| DE_SW| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | A-GRV|EEPRST|MU_MOD| AU_ON|AU_OFF|AGNORM|AGSWAP|!HRWCM| !WCM | A-GRV| !LANG| !GAME| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | ____ |MUV_DE|MUV_IN| MU_ON|MU_OFF| MI_ON|MI_OFF| Vol- | MPLY | Vol+ | ____ | ____ | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ |EEPRST| + * `-----------------------------------------------------------------------------------' + */ + [_ADJUST] = LAYOUT_planck_grid( + LALT(KC_LSFT), RESET, DEBUG, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_DE_SWITCH, + LALT(KC_GRV), EEP_RST, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, HRWIDECOLEMAK, WIDECOLEMAK, LALT(KC_GRV), LANG_SWITCH, GAMING, + KC_TRNS, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, KC_SVD_BD, KC_MPLY, KC_SVU_BU, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, EEPROM_RESET + ), + + /* _NAV + * ,-----------------------------------------------------------------------------------. + * |A(TAB)| C(->)| !LANG|A(GRV)| C(<-)| >>| | HOME | -> | PGUP | COPY | PASTE| DE_SW| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |C(TAB)| TAB | ESC | ENT |VIM_GG| MPLY | <- | ↓ | ↑ | -> | END | VIM_O| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | LSFT | XXXX |S(DEL)| CAPS | VIM_V| MUTE | HOME | PGDN | LSFT | RFST | C(F) | C(F) | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | XXXX | XXXX | ____ | BSPC | ____ | ____ | ENT | DEL | ____ | ____ | DE_SW| + * `-----------------------------------------------------------------------------------' + */ + [_NAV] = LAYOUT_planck_grid( + ALT_TAB, LCTL(KC_RGHT), LANG_SWITCH, LALT(KC_GRV), LCTL(KC_LEFT), KC_MNXT, KC_HOME, KC_RIGHT, KC_PGUP, LCTL(KC_INS), LSFT(KC_INS), KC_DE_SWITCH, + CTL_TAB, KC_TAB, KC_ESC, KC_ENT, TD(TD_VIM_GG), KC_MPLY, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_END, VIM_O, + KC_LSFT, KC_NO, LSFT(KC_DEL), KC_CAPS, VIM_V, KC_MUTE, KC_HOME, KC_PGDN, KC_LSFT, KC_RSFT, LCTL(KC_F), LCTL(KC_F), + KC_NO, KC_NO, KC_TRNS, KC_BSPC, KC_TRNS, LT(_NAV, KC_SPC), LT(_NAV, KC_SPC), KC_ENT, KC_DEL, KC_TRNS, KC_TRNS, KC_DE_SWITCH + ), + + /* _VIM + * ,-----------------------------------------------------------------------------------. + * |A(TAB)| C(->)| !LANG|A(GRV)| C(<-)| >>| | HOME | -> | PGUP | COPY | PASTE| DE_SW| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |C(TAB)| TAB | ESC | ENT |VIM_GG| MPLY | <- | ↓ | ↑ | -> | END | VIM_O| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | LSFT | XXXX |S(DEL)| CAPS | VIM_V| MUTE | HOME | PGDN | LSFT | RFST | C(F) | C(F) | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | XXXX | XXXX | !VIM | BSPC | ____ | ____ | ENT | DEL | ____ | ↓ | ↑ | + * `-----------------------------------------------------------------------------------' + */ + [_VIM] = LAYOUT_planck_grid( + ALT_TAB, LCTL(KC_RGHT), LANG_SWITCH, LALT(KC_GRV), LCTL(KC_LEFT), KC_MNXT, KC_HOME, KC_RIGHT, KC_PGUP, LCTL(KC_INS), LSFT(KC_INS), KC_DE_SWITCH, + CTL_TAB, KC_TAB, KC_ESC, KC_ENT, TD(TD_VIM_GG), KC_MPLY, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_END, VIM_O, + KC_LSFT, KC_NO, LSFT(KC_DEL), KC_CAPS, VIM_V, KC_MUTE, KC_HOME, KC_PGDN, KC_LSFT, KC_RSFT, LCTL(KC_F), LCTL(KC_F), + KC_NO, KC_NO, TG(_VIM), KC_BSPC, KC_TRNS, LT(_NAV, KC_SPC), LT(_NAV, KC_SPC), KC_ENT, KC_DEL, KC_TRNS, KC_DOWN, KC_UP + ), + + /* _NUM + * ,-----------------------------------------------------------------------------------. + * | F1 | F2 | F3 | F4 | |<< |NUMLCK| >>| | 7 | 8 | 9 | - | ____ | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | F5 | F6 | F7 | F8 | Vol+ | MPLY | * | 4 | 5 | 6 | + | . | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | F9 | F10 | F11 | F12 | Vol- | MUTE | = | 1 | 2 | 3 | / | , | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | ____ | ____ | ____ | ____ | ____ | ____ | 0 | . | , | = | ____ | + * `-----------------------------------------------------------------------------------' + */ + [_NUM] = LAYOUT_planck_grid( + KC_F1, KC_F2, KC_F3, KC_F4, KC_MPRV, KC_NLCK, KC_MNXT, KC_P7, KC_P8, KC_P9, KC_MINS, KC_TRNS, + KC_F5, KC_F6, KC_F7, KC_F8, KC_VOLU, KC_MPLY, KC_ASTR, KC_P4, KC_P5, KC_P6, KC_PLUS, KC_DOT, + KC_F9, KC_F10, KC_F11, KC_F12, KC_VOLD, KC_MUTE, KC_EQL, KC_P1, KC_P2, KC_P3, KC_SLSH, KC_COMM, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P0, KC_DOT, KC_COMM, KC_EQL, KC_TRNS + ), + + /* _MOUSE + * ,-----------------------------------------------------------------------------------. + * | XXXX | XXXX | MBTN4| MBTN5| XXXX | Bri+ | XXXX | MWHL↑|MAUS↑ | MWHL↑| XXXX | XXXX | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | XXXX | MBTN3| MBTN2| MBTN1| XXXX | MPLY | XXXX |MAUS<-|MAUS↓ |MAUS->| XXXX | XXXX | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | F9 | XXXX | XXXX | XXXX | XXXX | Bri- | XXXX | MWHL↓| XXXX | XXXX | ____ | XXXX | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |!MOUSE| XXXX | XXXX | ____ | XXXX | MAUS_ACCEL2 | ____ | XXXX | XXXX | ↓ | ↑ | + * `-----------------------------------------------------------------------------------' + */ + [_MOUSE] = LAYOUT_planck_grid( + KC_NO, KC_NO, KC_BTN4, KC_BTN5, KC_NO, KC_BRIU, KC_NO, KC_WH_U, KC_MS_U, KC_WH_U, KC_NO, KC_NO, + KC_NO, KC_BTN3, KC_BTN2, KC_BTN1, KC_NO, KC_MPLY, KC_NO, KC_MS_L, KC_MS_D, KC_MS_R, KC_NO, KC_NO, + KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_BRID, KC_NO, KC_WH_D, KC_NO, KC_NO, KC_TRNS, KC_NO, + TG(_MOUSE), KC_NO, KC_NO, KC_TRNS, KC_NO, KC_ACL2, KC_ACL2, KC_TRNS, KC_NO, KC_NO, KC_DOWN, KC_UP + ) + +}; + +// define the tap dance functions +void dance_prn(qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 1) { + tap_code16(KC_LPRN); + } else { + tap_code16(KC_LPRN); + tap_code16(KC_RPRN); + tap_code(KC_LEFT); + } +} +void dance_brc(qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 1) { + tap_code(KC_LBRC); + } else { + tap_code(KC_LBRC); + tap_code(KC_RBRC); + tap_code(KC_LEFT); + } +} +void dance_cbr(qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 1) { + tap_code16(KC_LCBR); + } else { + tap_code16(KC_LCBR); + tap_code16(KC_RCBR); + tap_code(KC_LEFT); + } +} +void dance_prn_de(qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 1) { + tap_code16(KC_ASTR); + } else { + tap_code16(KC_ASTR); + tap_code16(KC_LPRN); + tap_code(KC_LEFT); + } +} +void dance_brc_de(qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 1) { + tap_code16(RALT(KC_8)); + } else { + tap_code16(RALT(KC_8)); + tap_code16(RALT(KC_9)); + tap_code(KC_LEFT); + } +} +void dance_cbr_de(qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 1) { + tap_code16(RALT(KC_7)); + } else { + tap_code16(RALT(KC_7)); + tap_code16(RALT(KC_0)); + tap_code(KC_LEFT); + } +} +void vim_gg(qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 1) { + tap_code16(LCTL(KC_END)); + } else { + tap_code16(LCTL(KC_HOME)); + } +} + +qk_tap_dance_action_t tap_dance_actions[] = { + // declare tap dance actions here + [TD_PRN] = ACTION_TAP_DANCE_FN(dance_prn), [TD_BRC] = ACTION_TAP_DANCE_FN(dance_brc), [TD_CBR] = ACTION_TAP_DANCE_FN(dance_cbr), [TD_PRN_DE] = ACTION_TAP_DANCE_FN(dance_prn_de), [TD_BRC_DE] = ACTION_TAP_DANCE_FN(dance_brc_de), [TD_CBR_DE] = ACTION_TAP_DANCE_FN(dance_cbr_de), [TD_VIM_GG] = ACTION_TAP_DANCE_FN(vim_gg)}; + +float thumb_factor = 0.95; +float index_factor = 1.1; +float middle_factor = 1.2; +float ring_factor = 1.25; +float pinky_factor = 1.15; +float td_factor = 1.4; + +// define the per_key_tapping_term +uint16_t get_tapping_term(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + // thumb keys + case RSFT_T(KC_DEL): + return TAPPING_TERM * thumb_factor; + case RCTL_T(KC_TAB): + return TAPPING_TERM * thumb_factor; + case LT(_NAV, KC_LEFT): + return TAPPING_TERM * thumb_factor; + case LT(_NAV, KC_RIGHT): + return TAPPING_TERM * thumb_factor; + case LT(_LOWER, KC_BSPC): + return TAPPING_TERM * thumb_factor; + case LT(_LOWER_DE, KC_BSPC): + return TAPPING_TERM * thumb_factor; + case LT(_RAISE, KC_ENT): + return TAPPING_TERM * thumb_factor; + case LT(_RAISE_DE, KC_ENT): + return TAPPING_TERM * thumb_factor; + case LT(_NAV, KC_SPC): + return TAPPING_TERM * 1.0; + case LALT_T(KC_ESC): + return TAPPING_TERM * thumb_factor; + + // index finger keys + case LCTL_T(KC_P): + return TAPPING_TERM * index_factor; + case RCTL_T(KC_L): + return TAPPING_TERM * (index_factor + 0.1); + case LT(_NUM, KC_B): + return TAPPING_TERM * (index_factor + 0.1); + case LT(_NUM, KC_J): + return TAPPING_TERM * index_factor; + + // middle finger keys + case LSFT_T(KC_F): + return TAPPING_TERM * middle_factor; + case RSFT_T(KC_U): + return TAPPING_TERM * middle_factor; + + // ring finger keys + case LALT_T(KC_W): + return TAPPING_TERM * ring_factor; + case LALT_T(KC_Y): + return TAPPING_TERM * ring_factor; + case LGUI_T(KC_TAB): + return TAPPING_TERM * ring_factor; + + // pinky keys + case LGUI_T(KC_Q): + return TAPPING_TERM * pinky_factor; + case RGUI_T(KC_SCLN): + return TAPPING_TERM * pinky_factor; + case RGUI_T(KC_LBRC): + return TAPPING_TERM * pinky_factor; + case LT(_MOUSE, KC_Z): + return TAPPING_TERM * pinky_factor; + case LT(_MOUSE, KC_SLSH): + return TAPPING_TERM * pinky_factor; + case LCTL_T(KC_CAPS): + return TAPPING_TERM * pinky_factor; + + // tap-dance actions + case TD(TD_PRN): + return TAPPING_TERM * td_factor; + case TD(TD_BRC): + return TAPPING_TERM * td_factor; + case TD(TD_CBR): + return TAPPING_TERM * td_factor; + case TD(TD_PRN_DE): + return TAPPING_TERM * td_factor; + case TD(TD_BRC_DE): + return TAPPING_TERM * td_factor; + case TD(TD_CBR_DE): + return TAPPING_TERM * td_factor; + case TD(TD_VIM_GG): + return TAPPING_TERM * td_factor; + + default: + return TAPPING_TERM; + } +} + +// alt tab function setup +bool is_alt_tab_active = false; +bool is_ctl_tab_active = false; +bool de_layout_active = false; + +static uint16_t key_timer; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case WIDECOLEMAK: + if (record->event.pressed) { + set_single_persistent_default_layer(_WIDECOLEMAK); + } + return false; + break; + case HRWIDECOLEMAK: + if (record->event.pressed) { + set_single_persistent_default_layer(_HRWIDECOLEMAK); + } + return false; + break; + case GAMING: + if (record->event.pressed) { + layer_invert(_GAMING); + } + return false; + break; + case TG_COLEMAK: + if (record->event.pressed) { + tap_code(KC_ENT); + layer_invert(_WIDECOLEMAK); + } + return false; + break; + case VIM_O: + if (record->event.pressed) { + tap_code(KC_END); + tap_code(KC_ENT); + } + return false; + break; + case VIM_V: + if (record->event.pressed) { + if (get_mods() & MOD_MASK_SHIFT) { + clear_mods(); + } else { + register_mods(MOD_LSFT); + } + } + return false; + break; + case KC_SVU_BU: // increase backlight when pressing shift and vol up + if (record->event.pressed) { + if (get_mods() & MOD_MASK_SHIFT) { + register_code(KC_BRIU); + } else if (get_mods() & MOD_MASK_CTRL) { + register_code(KC_MNXT); + } else { + register_code(KC_VOLU); + } + } else { + unregister_code(KC_BRIU); + unregister_code(KC_MNXT); + unregister_code(KC_VOLU); + } + return false; + case KC_SVD_BD: // decrease backlight when pressing shift and vol up + if (record->event.pressed) { + if (get_mods() & MOD_MASK_SHIFT) { + register_code(KC_BRID); + } else if (get_mods() & MOD_MASK_CTRL) { + register_code(KC_MPRV); + } else { + register_code(KC_VOLD); + } + } else { + unregister_code(KC_BRID); + unregister_code(KC_MPRV); + unregister_code(KC_VOLD); + } + return false; + case KC_TAB_MPLY: // press tab or play/pause when ctrl is pressed + if (record->event.pressed) { + if (get_mods() & MOD_MASK_CTRL) { + register_code(KC_MPLY); + } else { + register_code(KC_TAB); + } + } else { + unregister_code(KC_MPLY); + unregister_code(KC_TAB); + } + return false; + case ALT_TAB: + if (record->event.pressed) { + if (!is_alt_tab_active) { + is_alt_tab_active = true; + add_mods(MOD_BIT(KC_LALT)); + } + register_code(KC_TAB); + } else { + unregister_code(KC_TAB); + } + break; + case CTL_TAB: + if (record->event.pressed) { + if (!is_ctl_tab_active) { + is_ctl_tab_active = true; + add_mods(MOD_BIT(KC_LCTL)); + } + register_code(KC_TAB); + } else { + unregister_code(KC_TAB); + } + break; + // the next case allows us to use alt_tab without a timer + case LT(_NAV, KC_SPC): + if (record->event.pressed) { + } else { + unregister_mods(MOD_LALT); + unregister_mods(MOD_LCTL); + is_alt_tab_active = false; + is_ctl_tab_active = false; + } + break; + case DE_ae: + if (record->event.pressed) { + uint8_t temp_mods = get_mods(); + if ((get_mods() | get_oneshot_mods()) & MOD_MASK_SHIFT) { + clear_oneshot_mods(); + clear_mods(); + add_mods(MOD_BIT(KC_LALT)); + tap_code(KC_P0); + tap_code(KC_P1); + tap_code(KC_P9); + tap_code(KC_P6); // Ä + } else { + clear_mods(); + add_mods(MOD_BIT(KC_LALT)); + tap_code(KC_P0); + tap_code(KC_P2); + tap_code(KC_P2); + tap_code(KC_P8); // ä + } + unregister_mods(MOD_LALT); + set_mods(temp_mods); + } + return false; + break; + case DE_AE: + if (record->event.pressed) { + uint8_t temp_mods = get_mods() | get_oneshot_mods(); + clear_oneshot_mods(); + clear_mods(); + add_mods(MOD_BIT(KC_LALT)); + tap_code(KC_P0); + tap_code(KC_P1); + tap_code(KC_P9); + tap_code(KC_P6); // Ä + unregister_mods(MOD_LALT); + set_mods(temp_mods); + } + return false; + break; + case DE_oe: + if (record->event.pressed) { + uint8_t temp_mods = get_mods(); + if ((get_mods() | get_oneshot_mods()) & MOD_MASK_SHIFT) { + clear_oneshot_mods(); + clear_mods(); + add_mods(MOD_BIT(KC_LALT)); + tap_code(KC_P0); + tap_code(KC_P2); + tap_code(KC_P1); + tap_code(KC_P4); // Ö + } else { + clear_mods(); + add_mods(MOD_BIT(KC_LALT)); + tap_code(KC_P0); + tap_code(KC_P2); + tap_code(KC_P4); + tap_code(KC_P6); // ö + } + unregister_mods(MOD_LALT); + set_mods(temp_mods); + } + return false; + break; + case DE_OE: + if (record->event.pressed) { + uint8_t temp_mods = get_mods() | get_oneshot_mods(); + clear_oneshot_mods(); + clear_mods(); + add_mods(MOD_BIT(KC_LALT)); + tap_code(KC_P0); + tap_code(KC_P2); + tap_code(KC_P1); + tap_code(KC_P4); // Ö + unregister_mods(MOD_LALT); + set_mods(temp_mods); + } + return false; + break; + case DE_ue: + if (record->event.pressed) { + uint8_t temp_mods = get_mods(); + if ((get_mods() | get_oneshot_mods()) & MOD_MASK_SHIFT) { + clear_oneshot_mods(); + clear_mods(); + add_mods(MOD_BIT(KC_LALT)); + tap_code(KC_P0); + tap_code(KC_P2); + tap_code(KC_P2); + tap_code(KC_P0); // Ü + } else { + clear_mods(); + add_mods(MOD_BIT(KC_LALT)); + tap_code(KC_P0); + tap_code(KC_P2); + tap_code(KC_P5); + tap_code(KC_P2); // ü + } + unregister_mods(MOD_LALT); + set_mods(temp_mods); + } + return false; + break; + case KC_DE_SWITCH: + if (record->event.pressed) { + if (de_layout_active) { + de_layout_active = false; // deactivate German overlay + set_single_persistent_default_layer(_HRWIDECOLEMAK); + } else { + de_layout_active = true; // activate German overlay + set_single_persistent_default_layer(_HRWIDECOLEMAK_DE); + } + return false; + } + break; + case LANG_SWITCH: + if (record->event.pressed) { + register_mods(MOD_LALT); + register_code(KC_LSFT); + if (de_layout_active) { + de_layout_active = false; // deactivate German overlay + set_single_persistent_default_layer(_HRWIDECOLEMAK); + } else { + de_layout_active = true; // activate German overlay + set_single_persistent_default_layer(_HRWIDECOLEMAK_DE); + } + } else { + unregister_code(KC_LSFT); + unregister_mods(MOD_LALT); + } + return false; + case DE_SZ: + if (record->event.pressed) { + uint8_t temp_mods = get_mods(); + if ((get_mods() | get_oneshot_mods()) & MOD_MASK_SHIFT) { + clear_oneshot_mods(); + clear_mods(); + add_mods(MOD_BIT(KC_LALT)); + tap_code(KC_P0); + tap_code(KC_P1); + tap_code(KC_P7); + tap_code(KC_P6); // ° + } else { + clear_mods(); + add_mods(MOD_BIT(KC_LALT)); + tap_code(KC_P0); + tap_code(KC_P2); + tap_code(KC_P2); + tap_code(KC_P3); // ß + } + unregister_mods(MOD_LALT); + set_mods(temp_mods); + } + return false; + break; + case DE_EGRAVE: + if (record->event.pressed) { + uint8_t temp_mods = get_mods(); + if ((get_mods() | get_oneshot_mods()) & MOD_MASK_SHIFT) { + clear_oneshot_mods(); + clear_mods(); + add_mods(MOD_BIT(KC_LALT)); + tap_code(KC_P0); + tap_code(KC_P2); + tap_code(KC_P0); + tap_code(KC_P0); // È + } else { + clear_mods(); + add_mods(MOD_BIT(KC_LALT)); + tap_code(KC_P0); + tap_code(KC_P2); + tap_code(KC_P3); + tap_code(KC_P2); // è + } + unregister_mods(MOD_LALT); + set_mods(temp_mods); + } + return false; + break; + case DE_EAIGU: + if (record->event.pressed) { + uint8_t temp_mods = get_mods(); + if ((get_mods() | get_oneshot_mods()) & MOD_MASK_SHIFT) { + clear_oneshot_mods(); + clear_mods(); + add_mods(MOD_BIT(KC_LALT)); + tap_code(KC_P0); + tap_code(KC_P2); + tap_code(KC_P0); + tap_code(KC_P1); // É + } else { + clear_mods(); + add_mods(MOD_BIT(KC_LALT)); + tap_code(KC_P0); + tap_code(KC_P2); + tap_code(KC_P3); + tap_code(KC_P3); // é + } + unregister_mods(MOD_LALT); + set_mods(temp_mods); + } + return false; + break; + case KC_CURRENCY: + if (record->event.pressed) { + uint8_t temp_mods = get_mods(); + if ((get_mods() | get_oneshot_mods()) & MOD_MASK_SHIFT) { + clear_oneshot_mods(); + clear_mods(); + add_mods(MOD_BIT(KC_LALT)); + tap_code(KC_P1); + tap_code(KC_P5); + tap_code(KC_P7); // ¥ + } else { + clear_mods(); + add_mods(MOD_BIT(KC_LALT)); + tap_code(KC_P0); + tap_code(KC_P1); + tap_code(KC_P2); + tap_code(KC_P8); // € + } + unregister_mods(MOD_LALT); + set_mods(temp_mods); + } + return false; + break; + case DE_SLSH_QUST: + if (record->event.pressed) { + key_timer = timer_read(); + layer_on(_MOUSE); + } else { + if (timer_elapsed(key_timer) < (TAPPING_TERM * pinky_factor)) { + layer_off(_MOUSE); + uint8_t temp_mods = get_mods() | get_oneshot_mods(); + if (temp_mods & MOD_MASK_SHIFT) { + tap_code(KC_MINS); // ? + } else { + tap_code16(KC_AMPR); // / + } + } else { + layer_off(_MOUSE); + } + } + return false; + break; + case DE_QUOT: + if (record->event.pressed) { + uint8_t temp_mods = get_mods() | get_oneshot_mods(); + if (temp_mods & MOD_MASK_SHIFT) { + register_code(KC_2); // \" + } else { + register_code16(KC_PIPE); // /' + } + } else { + unregister_code(KC_2); + unregister_code16(KC_PIPE); + } + return true; + case DE_DOT_RAB: + if (record->event.pressed) { + uint8_t temp_mods = get_mods() | get_oneshot_mods(); + if (temp_mods & MOD_MASK_SHIFT) { + register_code16(LSFT(KC_NUBS)); // > right angle bracket + } else { + register_code(KC_DOT); // . + } + } else { + unregister_code16(LSFT(KC_NUBS)); + unregister_code(KC_DOT); + } + return true; + case DE_COMM_LAB: + if (record->event.pressed) { + uint8_t temp_mods = get_mods() | get_oneshot_mods(); + if (temp_mods & MOD_MASK_SHIFT) { + clear_mods(); + clear_oneshot_mods(); + register_code16(KC_NUBS); // < left angle bracket + set_mods(temp_mods); + } else { + register_code(KC_COMM); // , + } + } else { + unregister_code16(KC_NUBS); + unregister_code(KC_COMM); + } + return true; + case DE_SCLN: + if (record->event.pressed) { + uint8_t temp_mods = get_mods() | get_oneshot_mods(); + if (temp_mods & MOD_MASK_SHIFT) { + tap_code(KC_DOT); // ; + } else { + add_mods(MOD_BIT(KC_LSFT)); + tap_code(KC_COMM); // : + del_mods(MOD_BIT(KC_LSFT)); + } + return false; + } + break; + case DE_BSLS: + if (record->event.pressed) { + uint8_t temp_mods = get_mods() | get_oneshot_mods(); + clear_mods(); + clear_oneshot_mods(); + add_mods(MOD_BIT(KC_RALT)); + if (temp_mods & MOD_MASK_SHIFT) { + register_code(KC_NUBS); // | Pipe + } else { + register_code(KC_MINS); // Backslash + } + set_mods(temp_mods); + } else { + unregister_code(KC_NUBS); + unregister_code(KC_MINS); + } + return true; + // switch multiplexing for escape, short tap for escape, long press for context menu + case M_ESCM: + if (record->event.pressed) { + key_timer = timer_read(); + } else { + if (timer_elapsed(key_timer) > TAPPING_TERM) { + tap_code(KC_APP); + } else { + tap_code(KC_ESC); + } + } + return false; + case M_RGUI_SCLN: + if (record->event.pressed) { + key_timer = timer_read(); + add_mods(MOD_BIT(KC_RGUI)); + } else { + del_mods(MOD_BIT(KC_RGUI)); + if (timer_elapsed(key_timer) < (TAPPING_TERM * pinky_factor)) { + uint8_t temp_mods = get_mods() | get_oneshot_mods(); + if (temp_mods & MOD_MASK_SHIFT) { + tap_code(KC_DOT); // ; + } else { + add_mods(MOD_BIT(KC_LSFT)); + tap_code(KC_COMM); // : + del_mods(MOD_BIT(KC_LSFT)); + } + } else { + tap_code(KC_RGUI); + } + } + return false; + break; + } + return true; +} + +bool muse_mode = false; +uint8_t last_muse_note = 0; +uint16_t muse_counter = 0; +uint8_t muse_offset = 70; +uint16_t muse_tempo = 50; + +bool encoder_update_user(uint8_t index, bool clockwise) { + if (muse_mode) { + if (IS_LAYER_ON(_RAISE)) { + if (clockwise) { + muse_offset++; + } else { + muse_offset--; + } + } else { + if (clockwise) { + muse_tempo += 1; + } else { + muse_tempo -= 1; + } + } + } else { + if (clockwise) { +#ifdef MOUSEKEY_ENABLE + tap_code(KC_MS_WH_DOWN); +#else + tap_code(KC_PGDN); +#endif + } else { +#ifdef MOUSEKEY_ENABLE + tap_code(KC_MS_WH_UP); +#else + tap_code(KC_PGUP); +#endif + } + } + return true; +} + +bool dip_switch_update_user(uint8_t index, bool active) { + switch (index) { + case 0: { + if (active) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + break; + } + case 1: + if (active) { + muse_mode = true; + } else { + muse_mode = false; + } + } + return true; +} + + +LEADER_EXTERNS(); + +void matrix_scan_user(void) { + LEADER_DICTIONARY() { + leading = false; + leader_end(); + + SEQ_ONE_KEY(KC_F) { + // Anything you can do in a macro. + SEND_STRING("QMK is awesome."); + } + SEQ_TWO_KEYS(KC_D, KC_D) { + SEND_STRING(SS_LCTL("a") SS_LCTL("c")); + } + SEQ_THREE_KEYS(KC_D, KC_D, KC_S) { + SEND_STRING("https://start.duckduckgo.com\n"); + } + SEQ_TWO_KEYS(KC_A, KC_S) { + register_code(KC_LGUI); + register_code(KC_S); + unregister_code(KC_S); + unregister_code(KC_LGUI); + } + } +#ifdef AUDIO_ENABLE + if (muse_mode) { + if (muse_counter == 0) { + uint8_t muse_note = muse_offset + SCALE[muse_clock_pulse()]; + if (muse_note != last_muse_note) { + stop_note(compute_freq_for_midi_note(last_muse_note)); + play_note(compute_freq_for_midi_note(muse_note), 0xF); + last_muse_note = muse_note; + } + } + muse_counter = (muse_counter + 1) % muse_tempo; + } else { + if (muse_counter) { + stop_all_notes(); + muse_counter = 0; + } + } +#endif +} + +bool music_mask_user(uint16_t keycode) { + switch (keycode) { + case RAISE: + case LOWER: + return false; + default: + return true; + } +} + +bool get_tapping_force_hold(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case LSFT_T(KC_S): + return true; + case RSFT_T(KC_E): + return true; + case LSFT_T(KC_D): + return true; + case RSFT_T(KC_K): + return true; + case LSFT_T(KC_F): + return true; + case RSFT_T(KC_U): + return true; + case LT(_RAISE, KC_ENT): + return true; + case LT(_RAISE_DE, KC_ENT): + return true; + case LT(_LOWER, KC_BSPC): + return true; + case LT(_LOWER_DE, KC_BSPC): + return true; + default: + return false; + } +} + +// Set RGB to change with layer changes +#define HSV_DARKORANGE 10, 255, 255 +#define HSV_DARKPINK 150, 100, 255 +#define HSV_GRASS 57, 255, 255 +#define HSV_OCEAN 148, 255, 255 + +// Light LEDs 1 to 9 in darkorange when HRCOLEMAK is active +const rgblight_segment_t PROGMEM my_layer0_layer[] = RGBLIGHT_LAYER_SEGMENTS({0, 10, HSV_DARKORANGE}); +// Light LEDs 1 to 9 in green when HRWIDECOLEMAK is active +const rgblight_segment_t PROGMEM my_layer1_layer[] = RGBLIGHT_LAYER_SEGMENTS({0, 10, HSV_OCEAN}); +// Light LEDs 1 to 9 in darkorange when de_layout_active is true +const rgblight_segment_t PROGMEM my_layer2_layer[] = RGBLIGHT_LAYER_SEGMENTS({3, 4, HSV_DARKORANGE}, {0, 3, HSV_OCEAN}, {8, 3, HSV_OCEAN}); +// Light LEDs 1 to 9 in red when GAMING layer is active +const rgblight_segment_t PROGMEM my_layer3_layer[] = RGBLIGHT_LAYER_SEGMENTS({0, 10, HSV_RED}); +// Light LEDs 1 to 9 in white when WIDECOLEMAK is active +const rgblight_segment_t PROGMEM my_layer4_layer[] = RGBLIGHT_LAYER_SEGMENTS({0, 10, HSV_WHITE}); +// Light bottom LEDs in purple when ADJUST layer is active +const rgblight_segment_t PROGMEM my_layer5_layer[] = RGBLIGHT_LAYER_SEGMENTS({0, 2, HSV_MAGENTA}, {7, 3, HSV_MAGENTA}); +// Light bottom LEDs in red when caps lock is active. Hard to ignore! +const rgblight_segment_t PROGMEM my_capslock_layer[] = RGBLIGHT_LAYER_SEGMENTS({0, 3, HSV_GRASS}, {7, 3, HSV_GRASS}); +// Light LEDs 1 to 9 in white when NAVIGATION is active +const rgblight_segment_t PROGMEM my_nav_layer[] = RGBLIGHT_LAYER_SEGMENTS({0, 10, HSV_WHITE}); + +// Now define the array of layers. Later layers take precedence +const rgblight_segment_t *const PROGMEM my_rgb_layers[] = RGBLIGHT_LAYERS_LIST(my_layer0_layer, // hrcolemak + my_layer1_layer, // hrwidecolemak + my_layer2_layer, // de_layout + my_layer3_layer, // gaming + my_layer4_layer, // widecolemak + my_layer5_layer, // adjust + my_nav_layer, // nav + my_capslock_layer // capslock +); + +void keyboard_post_init_user(void) { + // Enable the LED layers + rgblight_layers = my_rgb_layers; +} + +bool led_update_user(led_t led_state) { + rgblight_set_layer_state(7, led_state.caps_lock); + return true; +} + +layer_state_t layer_state_set_user(layer_state_t state) { + rgblight_set_layer_state(3, layer_state_cmp(state, _GAMING)); + rgblight_set_layer_state(4, layer_state_cmp(state, _WIDECOLEMAK)); + if ((layer_state_cmp(state, _LOWER) && layer_state_cmp(state, _RAISE)) || (layer_state_cmp(state, _LOWER_DE) && layer_state_cmp(state, _RAISE_DE))) { + return state | (1UL << _ADJUST); + } else { + return state & ~(1UL << _ADJUST); + } + // state = update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST); + rgblight_set_layer_state(5, layer_state_cmp(state, _ADJUST)); + // return state; +} + +layer_state_t default_layer_state_set_user(layer_state_t state) { + rgblight_set_layer_state(4, layer_state_cmp(state, _WIDECOLEMAK)); + rgblight_set_layer_state(1, layer_state_cmp(state, _HRWIDECOLEMAK)); + rgblight_set_layer_state(2, layer_state_cmp(state, _HRWIDECOLEMAK_DE)); + return state; +} diff --git a/keyboards/planck/keymaps/jweickm/readme.md b/keyboards/planck/keymaps/jweickm/readme.md new file mode 100644 index 0000000000..6628dfbdbf --- /dev/null +++ b/keyboards/planck/keymaps/jweickm/readme.md @@ -0,0 +1,154 @@ +# Semi-wide German/English MIT Planck Layout +Added keymap for my planck MIT. +It has a German and an English switching mode, so that it works the exact same with both OS languages. +It is a semi-wide layout, with the left hand all the way to the edge, and with one extra column in the middle used for media controls. +Home row mods implemented in the top row with individual tapping_terms for different fingers. +Mouse layer accessible through the pinkies. +Navigation layer on space. + +``` +/* _HRWIDECOLEMAK +* ,-----------------------------------------------------------------------------------. +* | G-Q | A-W | S-F | C-P |_Num-B|Vol/B+|_Num-J| C-L | S-U | A-Y | G-/ | ü | +* |------+------+------+------+------+------+------+------+------+------+------+------| +* | A | R | S | T | G | TAB | M | N | E | I | O | ' | +* |------+------+------+------+------+------+------+------+------+------+------+------| +* |_Mo-Z | X | C | D | V |Vol/B-| K | H | , | . |_Mo-/ | \ | +* |------+------+------+------+------+------+------+------+------+------+------+------| +* |C-CAPS| LEAD |MN-ESC|_L-BSP| LSFT | _Nav-SPC |_R-ENT|S-DEL | RALT |_Mo <-|_Mo ->| +* `-----------------------------------------------------------------------------------' +*/ +/* _HRWIDECOLEMAK_DE +* same as above, when the PC is set to German layout +* ,-----------------------------------------------------------------------------------. +* | G-Q | A-W | S-F | C-P |_Num-B|Vol/B+|_Num-J| C-L | S-U | A-Y | G-/ | ü | +* |------+------+------+------+------+------+------+------+------+------+------+------| +* | A | R | S | T | G | TAB | M | N | E | I | O | ' | +* |------+------+------+------+------+------+------+------+------+------+------+------| +* |_Mo-Z | X | C | D | V |Vol/B-| K | H | , | . |_Mo-/ | \ | +* |------+------+------+------+------+------+------+------+------+------+------+------| +* |C-CAPS| LEAD |MN-ESC|_L-BSP| LSFT | _Nav-SPC |_R-ENT|S-DEL | RALT |_Mo <-|_Mo ->| +* `-----------------------------------------------------------------------------------' +*/ +/* _GAMING +* ,-----------------------------------------------------------------------------------. +* | ESC | 1 | 2 | 3 | 4 | 5 | 6 | 7 | F5 | F8 | F9 |Vol/B+| +* |------+------+------+------+------+------+------+------+------+------+------+------| +* | TAB | Q | W | E | R | T | Y | U | I | O | P |Vol/B-| +* |------+------+------+------+------+------+------+------+------+------+------+------| +* | LSFT | A | S | D | F | G | H | J | Z | M | ; |_CM-EN| +* |------+------+------+------+------+------+------+------+------+------+------+------| +* | LCTL | C | B | X | LALT | SPACE | ENT | RALT | ____ | ____ | !GAME| +* `-----------------------------------------------------------------------------------' +*/ +/* WIDECOLEMAK +* no mod taps +* ,-----------------------------------------------------------------------------------. +* | Q | W | F | P | B |Vol/B+| J | L | U | Y | / | Ü | +* |------+------+------+------+------+------+------+------+------+------+------+------| +* | A | R | S | T | G | TAB | M | N | E | I | O | ' | +* |------+------+------+------+------+------+------+------+------+------+------+------| +* | Z | X | C | D | V |Vol/B-| K | H | , | . | / |!CM-EN| +* |------+------+------+------+------+------+------+------+------+------+------+------| +* |C-CAPS|G-TAB |MN-ESC|_L-BSP| LSFT | _NAV-SPC |_R-ENT|S-DEL |C-TAB |_Mo <-|_Mo ->| +* `-----------------------------------------------------------------------------------' +*/ +/* _LOWER +* ,-----------------------------------------------------------------------------------. +* | ! | @ | # | $ | % | ~ | ^ | & | * | ( | ) | Ö | +* |------+------+------+------+------+------+------+------+------+------+------+------| +* | F1 | F2 | F3 | F4 | F5 | F6 | ß | _ | + | { | } | Ä | +* |------+------+------+------+------+------+------+------+------+------+------+------| +* | F7 | F8 | F9 | F10 | F11 | F12 | MPLY | / | \ | | | € | è | +* |------+------+------+------+------+------+------+------+------+------+------+------| +* |!MOUSE| ____ | ____ | ____ | ____ | ____ | ____ | Vol- | Vol+ | ↓ | ↑ | +* `-----------------------------------------------------------------------------------' +*/ +/* _LOWER_DE +* ,-----------------------------------------------------------------------------------. +* | ! | @ | # | $ | % | ~ | ^ | & | * | ( | ) | Ö | +* |------+------+------+------+------+------+------+------+------+------+------+------| +* | F1 | F2 | F3 | F4 | F5 | F6 | ß | _ | + | { | } | Ä | +* |------+------+------+------+------+------+------+------+------+------+------+------| +* | F7 | F8 | F9 | F10 | F11 | F12 | MPLY | / | \ | | | € | ` | +* |------+------+------+------+------+------+------+------+------+------+------+------| +* |!MOUSE| ____ | ____ | ____ | ____ | ____ | ____ | Vol- | Vol+ | ↓ | ↑ | +* `-----------------------------------------------------------------------------------' +*/ +/* _RAISE +* ,-----------------------------------------------------------------------------------. +* | 1 | 2 | 3 | 4 | 5 | ` | 6 | 7 | 8 | 9 | 0 | ö | +* |------+------+------+------+------+------+------+------+------+------+------+------| +* | F1 | F2 | F3 | F4 | F5 | F6 | ß | - | = | [ | ] | ä | +* |------+------+------+------+------+------+------+------+------+------+------+------| +* | F7 | F8 | F9 | F10 | F11 | F12 | MPLY | \ | , | . | / | é | +* |------+------+------+------+------+------+------+------+------+------+------+------| +* |!MOUSE| ____ | ____ | BSPC | ____ | ____ | ____ | |<< | >>| | ↓ | ↑ | +* `-----------------------------------------------------------------------------------' +*/ +/* _RAISE_DE +* ,-----------------------------------------------------------------------------------. +* | 1 | 2 | 3 | 4 | 5 | ` | 6 | 7 | 8 | 9 | 0 | ö | +* |------+------+------+------+------+------+------+------+------+------+------+------| +* | F1 | F2 | F3 | F4 | F5 | F6 | ß | - | = | [ | ] | ä | +* |------+------+------+------+------+------+------+------+------+------+------+------| +* | F7 | F8 | F9 | F10 | F11 | F12 | MPLY | \ | , | . | / | ´ | +* |------+------+------+------+------+------+------+------+------+------+------+------| +* |!MOUSE| ____ | ____ | BSPC | ____ | ____ | ____ | |<< | >>| | ↓ | ↑ | +* `-----------------------------------------------------------------------------------' +*/ +/* _ADJUST +* ,-----------------------------------------------------------------------------------. +* | A-SFT| RESET| DEBUG|RGBTOG|RGBMOD|RGBHUI|RGBHUD|RGBSAI|RGBSAD|RGBVAI|RGBVAD| DE_SW| +* |------+------+------+------+------+------+------+------+------+------+------+------| +* | A-GRV|EEPRST|MU_MOD| AU_ON|AU_OFF|AGNORM|AGSWAP|!HRWCM| !WCM | A-GRV| !LANG| !GAME| +* |------+------+------+------+------+------+------+------+------+------+------+------| +* | ____ |MUV_DE|MUV_IN| MU_ON|MU_OFF| MI_ON|MI_OFF| Vol- | MPLY | Vol+ | ____ | ____ | +* |------+------+------+------+------+------+------+------+------+------+------+------| +* | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ | ____ |EEPRST| +* `-----------------------------------------------------------------------------------' +*/ +/* _NAV +* ,-----------------------------------------------------------------------------------. +* |A(TAB)| C(->)| !LANG|A(GRV)| C(<-)| >>| | HOME | -> | PGUP | COPY | PASTE| DE_SW| +* |------+------+------+------+------+------+------+------+------+------+------+------| +* |C(TAB)| TAB | ESC | ENT |VIM_GG| MPLY | <- | ↓ | ↑ | -> | END | VIM_O| +* |------+------+------+------+------+------+------+------+------+------+------+------| +* | LSFT | XXXX |S(DEL)| CAPS | VIM_V| MUTE | HOME | PGDN | LSFT | RFST | C(F) | C(F) | +* |------+------+------+------+------+------+------+------+------+------+------+------| +* | XXXX | XXXX | ____ | BSPC | ____ | ____ | ENT | DEL | ____ | ____ | DE_SW| +* `-----------------------------------------------------------------------------------' +*/ +/* _VIM +* ,-----------------------------------------------------------------------------------. +* |A(TAB)| C(->)| !LANG|A(GRV)| C(<-)| >>| | HOME | -> | PGUP | COPY | PASTE| DE_SW| +* |------+------+------+------+------+------+------+------+------+------+------+------| +* |C(TAB)| TAB | ESC | ENT |VIM_GG| MPLY | <- | ↓ | ↑ | -> | END | VIM_O| +* |------+------+------+------+------+------+------+------+------+------+------+------| +* | LSFT | XXXX |S(DEL)| CAPS | VIM_V| MUTE | HOME | PGDN | LSFT | RFST | C(F) | C(F) | +* |------+------+------+------+------+------+------+------+------+------+------+------| +* | XXXX | XXXX | !VIM | BSPC | ____ | ____ | ENT | DEL | ____ | ↓ | ↑ | +* `-----------------------------------------------------------------------------------' +*/ +/* _NUM +* ,-----------------------------------------------------------------------------------. +* | F1 | F2 | F3 | F4 | |<< |NUMLCK| >>| | 7 | 8 | 9 | - | ____ | +* |------+------+------+------+------+------+------+------+------+------+------+------| +* | F5 | F6 | F7 | F8 | Vol+ | MPLY | * | 4 | 5 | 6 | + | . | +* |------+------+------+------+------+------+------+------+------+------+------+------| +* | F9 | F10 | F11 | F12 | Vol- | MUTE | = | 1 | 2 | 3 | / | , | +* |------+------+------+------+------+------+------+------+------+------+------+------| +* | ____ | ____ | ____ | ____ | ____ | ____ | 0 | . | , | = | ____ | +* `-----------------------------------------------------------------------------------' +*/ +/* _MOUSE +* ,-----------------------------------------------------------------------------------. +* | XXXX | XXXX | MBTN4| MBTN5| XXXX | Bri+ | XXXX | MWHL↑|MAUS↑ | MWHL↑| XXXX | XXXX | +* |------+------+------+------+------+------+------+------+------+------+------+------| +* | XXXX | MBTN3| MBTN2| MBTN1| XXXX | MPLY | XXXX |MAUS<-|MAUS↓ |MAUS->| XXXX | XXXX | +* |------+------+------+------+------+------+------+------+------+------+------+------| +* | F9 | XXXX | XXXX | XXXX | XXXX | Bri- | XXXX | MWHL↓| XXXX | XXXX | ____ | XXXX | +* |------+------+------+------+------+------+------+------+------+------+------+------| +* |!MOUSE| XXXX | XXXX | ____ | XXXX | MAUS_ACCEL2 | ____ | XXXX | XXXX | ↓ | ↑ | +* `-----------------------------------------------------------------------------------' + */ diff --git a/keyboards/planck/keymaps/jweickm/rules.mk b/keyboards/planck/keymaps/jweickm/rules.mk new file mode 100644 index 0000000000..067ac4768c --- /dev/null +++ b/keyboards/planck/keymaps/jweickm/rules.mk @@ -0,0 +1,5 @@ +CONSOLE_ENABLE = no # Console for debug +LEADER_ENABLE = yes +TAP_DANCE_ENABLE = yes # enable tap dance functionality + +SRC += muse.c From 121ca7eca9a53727733645d9c4c90a206df02258 Mon Sep 17 00:00:00 2001 From: im a can what do you think lmao? <33337640+lyso1@users.noreply.github.com> Date: Sun, 19 Sep 2021 14:54:40 -0400 Subject: [PATCH 047/595] [Keyboard] Add LeFishe Keyboard (#14498) Co-authored-by: Ryan --- keyboards/lefishe/config.h | 48 ++++++++++++++ keyboards/lefishe/info.json | 19 ++++++ keyboards/lefishe/keymaps/default/keymap.c | 38 +++++++++++ keyboards/lefishe/keymaps/wk_sbs/keymap.c | 38 +++++++++++ keyboards/lefishe/keymaps/wkl/keymap.c | 38 +++++++++++ keyboards/lefishe/keymaps/wkl_sbs/keymap.c | 38 +++++++++++ keyboards/lefishe/lefishe.c | 17 +++++ keyboards/lefishe/lefishe.h | 76 ++++++++++++++++++++++ keyboards/lefishe/readme.md | 24 +++++++ keyboards/lefishe/rules.mk | 23 +++++++ 10 files changed, 359 insertions(+) create mode 100644 keyboards/lefishe/config.h create mode 100644 keyboards/lefishe/info.json create mode 100644 keyboards/lefishe/keymaps/default/keymap.c create mode 100644 keyboards/lefishe/keymaps/wk_sbs/keymap.c create mode 100644 keyboards/lefishe/keymaps/wkl/keymap.c create mode 100644 keyboards/lefishe/keymaps/wkl_sbs/keymap.c create mode 100644 keyboards/lefishe/lefishe.c create mode 100644 keyboards/lefishe/lefishe.h create mode 100644 keyboards/lefishe/readme.md create mode 100644 keyboards/lefishe/rules.mk diff --git a/keyboards/lefishe/config.h b/keyboards/lefishe/config.h new file mode 100644 index 0000000000..a5bafa5413 --- /dev/null +++ b/keyboards/lefishe/config.h @@ -0,0 +1,48 @@ +/*Copyright 2019 Lyso1 + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +#define VENDOR_ID 0x7856 +#define PRODUCT_ID 0x6169 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Lyso1 +#define PRODUCT lefishe + + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 18 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { B7, F7, F6, F5, F4 } +#define MATRIX_COL_PINS { F0, F1, D5, C7, C6, B6, B5, B4, D7, D6, D4, D3, D2, D1, D0, B3, B2, B1 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + diff --git a/keyboards/lefishe/info.json b/keyboards/lefishe/info.json new file mode 100644 index 0000000000..e31877a95b --- /dev/null +++ b/keyboards/lefishe/info.json @@ -0,0 +1,19 @@ +{ + "keyboard_name": "Le_Fishe", + "url": "", + "maintainer": "Lyso1", + "layouts": { + "LAYOUT_default": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"label":"~", "x":2.25, "y":0}, {"label":"!", "x":3.25, "y":0}, {"label":"@", "x":4.25, "y":0}, {"label":"#", "x":5.25, "y":0}, {"label":"$", "x":6.25, "y":0}, {"label":"%", "x":7.25, "y":0}, {"label":"^", "x":8.25, "y":0}, {"label":"&", "x":9.25, "y":0}, {"label":"*", "x":10.25, "y":0}, {"label":"(", "x":11.25, "y":0}, {"label":")", "x":12.25, "y":0}, {"label":"_", "x":13.25, "y":0}, {"label":"+", "x":14.25, "y":0}, {"label":"Backspace", "x":15.25, "y":0, "w":2}, {"label":"Insert", "x":17.25, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"label":"Tab", "x":2.25, "y":1, "w":1.5}, {"label":"Q", "x":3.75, "y":1}, {"label":"W", "x":4.75, "y":1}, {"label":"E", "x":5.75, "y":1}, {"label":"R", "x":6.75, "y":1}, {"label":"T", "x":7.75, "y":1}, {"label":"Y", "x":8.75, "y":1}, {"label":"U", "x":9.75, "y":1}, {"label":"I", "x":10.75, "y":1}, {"label":"O", "x":11.75, "y":1}, {"label":"P", "x":12.75, "y":1}, {"label":"{", "x":13.75, "y":1}, {"label":"}", "x":14.75, "y":1}, {"label":"|", "x":15.75, "y":1, "w":1.5}, {"label":"Delete", "x":17.25, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"label":"Caps", "x":2.25, "y":2, "w":1.25}, {"label":"A", "x":4, "y":2}, {"label":"S", "x":5, "y":2}, {"label":"D", "x":6, "y":2}, {"label":"F", "x":7, "y":2}, {"label":"G", "x":8, "y":2}, {"label":"H", "x":9, "y":2}, {"label":"J", "x":10, "y":2}, {"label":"K", "x":11, "y":2}, {"label":"L", "x":12, "y":2}, {"label":":", "x":13, "y":2}, {"label":"\"", "x":14, "y":2}, {"label":"Enter", "x":15, "y":2, "w":2.25}, {"label":"PgUp", "x":17.25, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"label":"Shift", "x":2.25, "y":3, "w":2.25}, {"label":"Z", "x":4.5, "y":3}, {"label":"X", "x":5.5, "y":3}, {"label":"C", "x":6.5, "y":3}, {"label":"V", "x":7.5, "y":3}, {"label":"B", "x":8.5, "y":3}, {"label":"N", "x":9.5, "y":3}, {"label":"M", "x":10.5, "y":3}, {"label":"<", "x":11.5, "y":3}, {"label":">", "x":12.5, "y":3}, {"label":"?", "x":13.5, "y":3}, {"label":"Shift", "x":14.5, "y":3, "w":1.75}, {"label":"\u2191", "x":16.25, "y":3}, {"label":"PgDn", "x":17.25, "y":3}, {"x":0, "y":4}, {"x":1, "y":4}, {"label":"Ctrl", "x":2.25, "y":4, "w":1.5}, {"label":"LGUI", "x":3.75, "y":4}, {"label":"Alt", "x":4.75, "y":4, "w":1.5}, {"x":6.25, "y":4, "w":7}, {"label":"Alt", "x":13.25, "y":4, "w":1.5}, {"label":"\u2190", "x":15.25, "y":4}, {"label":"\u2193", "x":16.25, "y":4}, {"label":"\u2192", "x":17.25, "y":4}] + }, + "LAYOUT_wk_sbs": { + "layout": [{"label":"F1", "x":0, "y":0}, {"label":"F2", "x":1, "y":0}, {"label":"~", "x":2.25, "y":0}, {"label":"!", "x":3.25, "y":0}, {"label":"@", "x":4.25, "y":0}, {"label":"#", "x":5.25, "y":0}, {"label":"$", "x":6.25, "y":0}, {"label":"%", "x":7.25, "y":0}, {"label":"^", "x":8.25, "y":0}, {"label":"&", "x":9.25, "y":0}, {"label":"*", "x":10.25, "y":0}, {"label":"(", "x":11.25, "y":0}, {"label":")", "x":12.25, "y":0}, {"label":"_", "x":13.25, "y":0}, {"label":"+", "x":14.25, "y":0}, {"label":"|", "x":15.25, "y":0}, {"x":16.25, "y":0}, {"label":"Insert", "x":17.25, "y":0}, {"label":"F3", "x":0, "y":1}, {"label":"F4", "x":1, "y":1}, {"label":"Tab", "x":2.25, "y":1, "w":1.5}, {"label":"Q", "x":3.75, "y":1}, {"label":"W", "x":4.75, "y":1}, {"label":"E", "x":5.75, "y":1}, {"label":"R", "x":6.75, "y":1}, {"label":"T", "x":7.75, "y":1}, {"label":"Y", "x":8.75, "y":1}, {"label":"U", "x":9.75, "y":1}, {"label":"I", "x":10.75, "y":1}, {"label":"O", "x":11.75, "y":1}, {"label":"P", "x":12.75, "y":1}, {"label":"{", "x":13.75, "y":1}, {"label":"}", "x":14.75, "y":1}, {"label":"Backspace", "x":15.75, "y":1, "w":1.5}, {"label":"Delete", "x":17.25, "y":1}, {"label":"F5", "x":0, "y":2}, {"label":"F6", "x":1, "y":2}, {"label":"Caps", "x":2.25, "y":2, "w":1.25}, {"label":"A", "x":4, "y":2}, {"label":"S", "x":5, "y":2}, {"label":"D", "x":6, "y":2}, {"label":"F", "x":7, "y":2}, {"label":"G", "x":8, "y":2}, {"label":"H", "x":9, "y":2}, {"label":"J", "x":10, "y":2}, {"label":"K", "x":11, "y":2}, {"label":"L", "x":12, "y":2}, {"label":":", "x":13, "y":2}, {"label":"\"", "x":14, "y":2}, {"label":"Enter", "x":15, "y":2, "w":2.25}, {"label":"PgUp", "x":17.25, "y":2}, {"label":"F7", "x":0, "y":3}, {"label":"F8", "x":1, "y":3}, {"label":"Shift", "x":2.25, "y":3, "w":2.25}, {"label":"Z", "x":4.5, "y":3}, {"label":"X", "x":5.5, "y":3}, {"label":"C", "x":6.5, "y":3}, {"label":"V", "x":7.5, "y":3}, {"label":"B", "x":8.5, "y":3}, {"label":"N", "x":9.5, "y":3}, {"label":"M", "x":10.5, "y":3}, {"label":"<", "x":11.5, "y":3}, {"label":">", "x":12.5, "y":3}, {"label":"?", "x":13.5, "y":3}, {"label":"Shift", "x":14.5, "y":3, "w":1.75}, {"label":"\u2191", "x":16.25, "y":3}, {"label":"PgDn", "x":17.25, "y":3}, {"label":"F9", "x":0, "y":4}, {"label":"F10", "x":1, "y":4}, {"label":"Ctrl", "x":2.25, "y":4, "w":1.5}, {"label":"LGUI", "x":3.75, "y":4}, {"label":"Alt", "x":4.75, "y":4, "w":1.5}, {"x":6.25, "y":4, "w":7}, {"label":"Alt", "x":13.25, "y":4, "w":1.5}, {"label":"\u2190", "x":15.25, "y":4}, {"label":"\u2193", "x":16.25, "y":4}, {"label":"\u2192", "x":17.25, "y":4}] + }, + "LAYOUT_wkl_sbs": { + "layout": [{"label":"F1", "x":0, "y":0}, {"label":"F2", "x":1, "y":0}, {"label":"~", "x":2.25, "y":0}, {"label":"!", "x":3.25, "y":0}, {"label":"@", "x":4.25, "y":0}, {"label":"#", "x":5.25, "y":0}, {"label":"$", "x":6.25, "y":0}, {"label":"%", "x":7.25, "y":0}, {"label":"^", "x":8.25, "y":0}, {"label":"&", "x":9.25, "y":0}, {"label":"*", "x":10.25, "y":0}, {"label":"(", "x":11.25, "y":0}, {"label":")", "x":12.25, "y":0}, {"label":"_", "x":13.25, "y":0}, {"label":"+", "x":14.25, "y":0}, {"label":"|", "x":15.25, "y":0}, {"x":16.25, "y":0}, {"label":"Insert", "x":17.25, "y":0}, {"label":"F3", "x":0, "y":1}, {"label":"F4", "x":1, "y":1}, {"label":"Tab", "x":2.25, "y":1, "w":1.5}, {"label":"Q", "x":3.75, "y":1}, {"label":"W", "x":4.75, "y":1}, {"label":"E", "x":5.75, "y":1}, {"label":"R", "x":6.75, "y":1}, {"label":"T", "x":7.75, "y":1}, {"label":"Y", "x":8.75, "y":1}, {"label":"U", "x":9.75, "y":1}, {"label":"I", "x":10.75, "y":1}, {"label":"O", "x":11.75, "y":1}, {"label":"P", "x":12.75, "y":1}, {"label":"{", "x":13.75, "y":1}, {"label":"}", "x":14.75, "y":1}, {"label":"Backspace", "x":15.75, "y":1, "w":1.5}, {"label":"Delete", "x":17.25, "y":1}, {"label":"F5", "x":0, "y":2}, {"label":"F6", "x":1, "y":2}, {"label":"Caps", "x":2.25, "y":2, "w":1.25}, {"label":"A", "x":4, "y":2}, {"label":"S", "x":5, "y":2}, {"label":"D", "x":6, "y":2}, {"label":"F", "x":7, "y":2}, {"label":"G", "x":8, "y":2}, {"label":"H", "x":9, "y":2}, {"label":"J", "x":10, "y":2}, {"label":"K", "x":11, "y":2}, {"label":"L", "x":12, "y":2}, {"label":":", "x":13, "y":2}, {"label":"\"", "x":14, "y":2}, {"label":"Enter", "x":15, "y":2, "w":2.25}, {"label":"PgUp", "x":17.25, "y":2}, {"label":"F7", "x":0, "y":3}, {"label":"F8", "x":1, "y":3}, {"label":"Shift", "x":2.25, "y":3, "w":2.25}, {"label":"Z", "x":4.5, "y":3}, {"label":"X", "x":5.5, "y":3}, {"label":"C", "x":6.5, "y":3}, {"label":"V", "x":7.5, "y":3}, {"label":"B", "x":8.5, "y":3}, {"label":"N", "x":9.5, "y":3}, {"label":"M", "x":10.5, "y":3}, {"label":"<", "x":11.5, "y":3}, {"label":">", "x":12.5, "y":3}, {"label":"?", "x":13.5, "y":3}, {"label":"Shift", "x":14.5, "y":3, "w":1.75}, {"label":"\u2191", "x":16.25, "y":3}, {"label":"PgDn", "x":17.25, "y":3}, {"label":"F9", "x":0, "y":4}, {"label":"F10", "x":1, "y":4}, {"label":"Ctrl", "x":2.25, "y":4, "w":1.5}, {"label":"Alt", "x":4.75, "y":4, "w":1.5}, {"x":6.25, "y":4, "w":7}, {"label":"Alt", "x":13.25, "y":4, "w":1.5}, {"label":"\u2190", "x":15.25, "y":4}, {"label":"\u2193", "x":16.25, "y":4}, {"label":"\u2192", "x":17.25, "y":4}] + }, + "LAYOUT_wkl": { + "layout": [{"label":"F1", "x":0, "y":0}, {"label":"F2", "x":1, "y":0}, {"label":"~", "x":2.25, "y":0}, {"label":"!", "x":3.25, "y":0}, {"label":"@", "x":4.25, "y":0}, {"label":"#", "x":5.25, "y":0}, {"label":"$", "x":6.25, "y":0}, {"label":"%", "x":7.25, "y":0}, {"label":"^", "x":8.25, "y":0}, {"label":"&", "x":9.25, "y":0}, {"label":"*", "x":10.25, "y":0}, {"label":"(", "x":11.25, "y":0}, {"label":")", "x":12.25, "y":0}, {"label":"_", "x":13.25, "y":0}, {"label":"+", "x":14.25, "y":0}, {"label":"Backspace", "x":15.25, "y":0, "w":2}, {"label":"Insert", "x":17.25, "y":0}, {"label":"F3", "x":0, "y":1}, {"label":"F4", "x":1, "y":1}, {"label":"Tab", "x":2.25, "y":1, "w":1.5}, {"label":"Q", "x":3.75, "y":1}, {"label":"W", "x":4.75, "y":1}, {"label":"E", "x":5.75, "y":1}, {"label":"R", "x":6.75, "y":1}, {"label":"T", "x":7.75, "y":1}, {"label":"Y", "x":8.75, "y":1}, {"label":"U", "x":9.75, "y":1}, {"label":"I", "x":10.75, "y":1}, {"label":"O", "x":11.75, "y":1}, {"label":"P", "x":12.75, "y":1}, {"label":"{", "x":13.75, "y":1}, {"label":"}", "x":14.75, "y":1}, {"label":"|", "x":15.75, "y":1, "w":1.5}, {"label":"Delete", "x":17.25, "y":1}, {"label":"F5", "x":0, "y":2}, {"label":"F6", "x":1, "y":2}, {"label":"Caps", "x":2.25, "y":2, "w":1.25}, {"label":"A", "x":4, "y":2}, {"label":"S", "x":5, "y":2}, {"label":"D", "x":6, "y":2}, {"label":"F", "x":7, "y":2}, {"label":"G", "x":8, "y":2}, {"label":"H", "x":9, "y":2}, {"label":"J", "x":10, "y":2}, {"label":"K", "x":11, "y":2}, {"label":"L", "x":12, "y":2}, {"label":":", "x":13, "y":2}, {"label":"\"", "x":14, "y":2}, {"label":"Enter", "x":15, "y":2, "w":2.25}, {"label":"PgUp", "x":17.25, "y":2}, {"label":"F7", "x":0, "y":3}, {"label":"F8", "x":1, "y":3}, {"label":"Shift", "x":2.25, "y":3, "w":2.25}, {"label":"Z", "x":4.5, "y":3}, {"label":"X", "x":5.5, "y":3}, {"label":"C", "x":6.5, "y":3}, {"label":"V", "x":7.5, "y":3}, {"label":"B", "x":8.5, "y":3}, {"label":"N", "x":9.5, "y":3}, {"label":"M", "x":10.5, "y":3}, {"label":"<", "x":11.5, "y":3}, {"label":">", "x":12.5, "y":3}, {"label":"?", "x":13.5, "y":3}, {"label":"Shift", "x":14.5, "y":3, "w":1.75}, {"label":"\u2191", "x":16.25, "y":3}, {"label":"PgDn", "x":17.25, "y":3}, {"label":"F9", "x":0, "y":4}, {"label":"F10", "x":1, "y":4}, {"label":"Ctrl", "x":2.25, "y":4, "w":1.5}, {"label":"Alt", "x":4.75, "y":4, "w":1.5}, {"x":6.25, "y":4, "w":7}, {"label":"Alt", "x":13.25, "y":4, "w":1.5}, {"label":"\u2190", "x":15.25, "y":4}, {"label":"\u2193", "x":16.25, "y":4}, {"label":"\u2192", "x":17.25, "y":4}] + } + } +} diff --git a/keyboards/lefishe/keymaps/default/keymap.c b/keyboards/lefishe/keymaps/default/keymap.c new file mode 100644 index 0000000000..5ba35de7b0 --- /dev/null +++ b/keyboards/lefishe/keymaps/default/keymap.c @@ -0,0 +1,38 @@ +/* Copyright 2020 Lyso1/Lysol#5640(board/layout code) + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +enum layer_names { + _BASE, + _FN +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_default( + KC_F1, KC_F2, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, + KC_F3, KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_F5, KC_F6, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_F7, KC_F8, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_F9, KC_F10, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + [_FN] = LAYOUT_default( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/lefishe/keymaps/wk_sbs/keymap.c b/keyboards/lefishe/keymaps/wk_sbs/keymap.c new file mode 100644 index 0000000000..36c7d73b86 --- /dev/null +++ b/keyboards/lefishe/keymaps/wk_sbs/keymap.c @@ -0,0 +1,38 @@ +/* Copyright 2020 Lyso1/Lysol#5640(board/layout code) + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +enum layer_names { + _BASE, + _FN +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_wk_sbs( + KC_F1, KC_F2, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_INS, + KC_F3, KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_DEL, + KC_F5, KC_F6, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_F7, KC_F8, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_F9, KC_F10, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + [_FN] = LAYOUT_wk_sbs( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/lefishe/keymaps/wkl/keymap.c b/keyboards/lefishe/keymaps/wkl/keymap.c new file mode 100644 index 0000000000..f40e933d6d --- /dev/null +++ b/keyboards/lefishe/keymaps/wkl/keymap.c @@ -0,0 +1,38 @@ +/* Copyright 2020 Lyso1/Lysol#5640(board/layout code) + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +enum layer_names { + _BASE, + _FN +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_wkl( + KC_F1, KC_F2, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, + KC_F3, KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_F5, KC_F6, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_F7, KC_F8, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_F9, KC_F10, KC_LCTL, KC_LALT, KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + [_FN] = LAYOUT_wkl( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/lefishe/keymaps/wkl_sbs/keymap.c b/keyboards/lefishe/keymaps/wkl_sbs/keymap.c new file mode 100644 index 0000000000..91a707db78 --- /dev/null +++ b/keyboards/lefishe/keymaps/wkl_sbs/keymap.c @@ -0,0 +1,38 @@ +/* Copyright 2020 Lyso1/Lysol#5640(board/layout code) + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +enum layer_names { + _BASE, + _FN +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_wkl_sbs( + KC_F1, KC_F2, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_INS, + KC_F3, KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_DEL, + KC_F5, KC_F6, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_F7, KC_F8, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_F9, KC_F10, KC_LCTL, KC_LALT, KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + [_FN] = LAYOUT_wkl_sbs( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/lefishe/lefishe.c b/keyboards/lefishe/lefishe.c new file mode 100644 index 0000000000..c557a59c2d --- /dev/null +++ b/keyboards/lefishe/lefishe.c @@ -0,0 +1,17 @@ +/* Copyright 2021 Lyso1 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "lefishe.h" diff --git a/keyboards/lefishe/lefishe.h b/keyboards/lefishe/lefishe.h new file mode 100644 index 0000000000..98197b21c4 --- /dev/null +++ b/keyboards/lefishe/lefishe.h @@ -0,0 +1,76 @@ +/* Copyright 2020 Lyso1 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + + +#include "quantum.h" + +#define LAYOUT_default( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K017, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K116, K117, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K216, K217, \ + K300, K301, K302, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K315, K316, K317, \ + K400, K401, K402, K403, K404, K408, K413, K415, K416, K417 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, KC_NO, K017 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, KC_NO, K116, K117 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO, KC_NO, K216, K217 }, \ + { K300, K301, K302, KC_NO, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, KC_NO, K315, K316, K317 }, \ + { K400, K401, K402, K403, K404, KC_NO, KC_NO, KC_NO, K408, KC_NO, KC_NO, KC_NO, KC_NO, K413, KC_NO, K415, K416, K417 } \ +} + +#define LAYOUT_wk_sbs( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, K017, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K116, K117, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K216, K217, \ + K300, K301, K302, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K315, K316, K317, \ + K400, K401, K402, K403, K404, K408, K413, K415, K416, K417 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, K017 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, KC_NO, K116, K117 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO, KC_NO, K216, K217 }, \ + { K300, K301, K302, KC_NO, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, KC_NO, K315, K316, K317 }, \ + { K400, K401, K402, K403, K404, KC_NO, KC_NO, KC_NO, K408, KC_NO, KC_NO, KC_NO, KC_NO, K413, KC_NO, K415, K416, K417 } \ +} + +#define LAYOUT_wkl_sbs( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, K017, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K116, K117, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K216, K217, \ + K300, K301, K302, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K315, K316, K317, \ + K400, K401, K402, K404, K408, K413, K415, K416, K417 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, K017 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, KC_NO, K116, K117 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO, KC_NO, K216, K217 }, \ + { K300, K301, K302, KC_NO, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, KC_NO, K315, K316, K317 }, \ + { K400, K401, K402, KC_NO, K404, KC_NO, KC_NO, KC_NO, K408, KC_NO, KC_NO, KC_NO, KC_NO, K413, KC_NO, K415, K416, K417 } \ +} + +#define LAYOUT_wkl( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K017, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K116, K117, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K216, K217, \ + K300, K301, K302, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K315, K316, K317, \ + K400, K401, K402, K404, K408, K413, K415, K416, K417 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, KC_NO, K017 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, KC_NO, K116, K117 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO, KC_NO, K216, K217 }, \ + { K300, K301, K302, KC_NO, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, KC_NO, K315, K316, K317 }, \ + { K400, K401, K402, KC_NO, K404, KC_NO, KC_NO, KC_NO, K408, KC_NO, KC_NO, KC_NO, KC_NO, K413, KC_NO, K415, K416, K417 } \ +} diff --git a/keyboards/lefishe/readme.md b/keyboards/lefishe/readme.md new file mode 100644 index 0000000000..ae6ab1322e --- /dev/null +++ b/keyboards/lefishe/readme.md @@ -0,0 +1,24 @@ +# lefishe + +firmware for the 65xt keyboard designed around the symmetrical blocker 65% layout. +This pcb cab also be used as a replacement pcb for the revoKmini/kmacmini with some modification to the design + +* Keyboard Maintainer: [Lyso1](https://github.com/lyso1) +* Hardware Supported: LeFishe, atmega32u4 +* Hardware Availability: [/u/TheLysol_27](https://www.reddit.com/user/TheLysol_27) + +Make example for this keyboard (after setting up your build environment): + + make lefishe:default + +Enter into the bootloader to flash new firmware in 3 ways: + + * **Bootmagic reset**: Hold down the key at (0,0) in the matrix(The F1 key in this case) and plug the the keyboard in. + * **Physical reset button**: Briefly press the button on the back and left side of the PCB(exactly under where the "2" key would be located) while the PCB is plugged in. + * **Keycode in layout**: Press the key mapped to `RESET` (RALT + E in this case) while the keyboard is plugged in. + +Flashing example for this keyboard: + + make lefishe:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/lefishe/rules.mk b/keyboards/lefishe/rules.mk new file mode 100644 index 0000000000..09f5916882 --- /dev/null +++ b/keyboards/lefishe/rules.mk @@ -0,0 +1,23 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +UNICODE_ENABLE = yes + From 4dbeeaa0d685ee7449010d2dc2a930a5921c8a8c Mon Sep 17 00:00:00 2001 From: XScorpion2 Date: Sun, 19 Sep 2021 15:18:32 -0500 Subject: [PATCH 048/595] Doc Fixes & Custom Matrix Fix (#14526) --- docs/custom_quantum_functions.md | 4 +-- keyboards/rgbkb/mun/keymaps/xulkal2/keymap.c | 24 ++++++++------- keyboards/rgbkb/mun/keymaps/xulkal2/rules.mk | 3 +- keyboards/rgbkb/mun/matrix.c | 32 ++++++++++++++------ keyboards/rgbkb/mun/rules.mk | 4 +-- 5 files changed, 41 insertions(+), 26 deletions(-) diff --git a/docs/custom_quantum_functions.md b/docs/custom_quantum_functions.md index 494e76996e..b0ed0f588d 100644 --- a/docs/custom_quantum_functions.md +++ b/docs/custom_quantum_functions.md @@ -148,8 +148,8 @@ This is useful for setting up stuff that you may need elsewhere, but isn't hardw * GPIO pin initialisation: `void matrix_init_pins(void)` * This needs to perform the low-level initialisation of all row and column pins. By default this will initialise the input/output state of each of the GPIO pins listed in `MATRIX_ROW_PINS` and `MATRIX_COL_PINS`, based on whether or not the keyboard is set up for `ROW2COL`, `COL2ROW`, or `DIRECT_PINS`. Should the keyboard designer override this function, no initialisation of pin state will occur within QMK itself, instead deferring to the keyboard's override. -* `COL2ROW`-based row reads: `void matrix_read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)` -* `ROW2COL`-based column reads: `void matrix_read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)` +* `COL2ROW`-based row reads: `void matrix_read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)` +* `ROW2COL`-based column reads: `void matrix_read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)` * `DIRECT_PINS`-based reads: `void matrix_read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)` * These three functions need to perform the low-level retrieval of matrix state of relevant input pins, based on the matrix type. Only one of the functions should be implemented, if needed. By default this will iterate through `MATRIX_ROW_PINS` and `MATRIX_COL_PINS`, configuring the inputs and outputs based on whether or not the keyboard is set up for `ROW2COL`, `COL2ROW`, or `DIRECT_PINS`. Should the keyboard designer override this function, no manipulation of matrix GPIO pin state will occur within QMK itself, instead deferring to the keyboard's override. diff --git a/keyboards/rgbkb/mun/keymaps/xulkal2/keymap.c b/keyboards/rgbkb/mun/keymaps/xulkal2/keymap.c index 2de5888f17..cd1eec7515 100644 --- a/keyboards/rgbkb/mun/keymaps/xulkal2/keymap.c +++ b/keyboards/rgbkb/mun/keymaps/xulkal2/keymap.c @@ -159,6 +159,8 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } } +//#define MATRIX_SCAN_DEBUG +#if !defined(MATRIX_SCAN_DEBUG) static void render_layer(void) { // Host Keyboard Layer Status oled_write_P(PSTR("Layer"), false); @@ -190,8 +192,8 @@ static void render_touch(void) oled_write_P(!touch_encoder_toggled() ? PSTR("TOUCH") : PSTR(" "), false); oled_write_P(touch_encoder_calibrating() ? PSTR("CLBRT") : PSTR(" "), false); } - -/*static uint32_t scan_counter = 0; +#else +static uint32_t scan_counter = 0; static uint32_t scan_value = 0; static uint16_t scan_timer = 1000; @@ -218,27 +220,27 @@ void render_debug_scan(void) { static char buffer[6] = {0}; snprintf(buffer, sizeof(buffer), "%5d", scan_value); oled_write_ln_P(buffer, false); -}*/ +} +#endif void oled_task_user(void) { +#if !defined(MATRIX_SCAN_DEBUG) if (is_keyboard_left()) { render_layer(); oled_write_P(PSTR(" "), false); render_leds(); oled_write_P(PSTR(" "), false); render_touch(); - //oled_write_P(PSTR(" "), false); - //render_debug_scan(); - oled_set_cursor(0, 12); - render_icon(); } else { render_rgb_menu(); - //oled_write_P(PSTR(" "), false); - //render_debug_scan(); - oled_set_cursor(0, 12); - render_icon(); } +#else + oled_write_P(PSTR(" "), false); + render_debug_scan(); +#endif + oled_set_cursor(0, 12); + render_icon(); } oled_rotation_t oled_init_user(oled_rotation_t rotation) { diff --git a/keyboards/rgbkb/mun/keymaps/xulkal2/rules.mk b/keyboards/rgbkb/mun/keymaps/xulkal2/rules.mk index e35ec125e6..a087f669da 100644 --- a/keyboards/rgbkb/mun/keymaps/xulkal2/rules.mk +++ b/keyboards/rgbkb/mun/keymaps/xulkal2/rules.mk @@ -1,4 +1,3 @@ MOUSEKEY_ENABLE = yes # using for mouse wheel up and down, more granular than page up/down -OPT_DEFS += -DRGB_UNLIMITED_POWER -#DEBOUNCE_TYPE = sym_eager_pk \ No newline at end of file +OPT_DEFS += -DRGB_UNLIMITED_POWER \ No newline at end of file diff --git a/keyboards/rgbkb/mun/matrix.c b/keyboards/rgbkb/mun/matrix.c index b859847f10..2472d217c7 100644 --- a/keyboards/rgbkb/mun/matrix.c +++ b/keyboards/rgbkb/mun/matrix.c @@ -11,7 +11,19 @@ #include "atomic_util.h" #include "gpio.h" -static pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; +#define ROWS_PER_HAND (MATRIX_ROWS / 2) +static const pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; +static const pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; + +void matrix_init_pins(void) { + for (size_t i = 0; i < MATRIX_COLS; i++) { + setPinInputHigh(col_pins[i]); + } + for (size_t i = 0; i < ROWS_PER_HAND; i++) { + setPinOutput(row_pins[i]); + writePinHigh(row_pins[i]); + } +} void matrix_read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) { /* Drive row pin low. */ @@ -22,15 +34,17 @@ void matrix_read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) uint16_t porta = palReadPort(GPIOA); uint16_t portb = palReadPort(GPIOB); +// clang-format off /* Order of pins on the mun is: A0, B11, B0, B10, B12, B2, A8 Pin is active low, therefore we have to invert the result. */ - matrix_row_t cols = ~(((porta & (0x1 << 0)) >> 0) // A0 (0) - | ((portb & (0x1 << 11)) >> 10) // B11 (1) - | ((portb & (0x1 << 0)) << 2) // B0 (2) - | ((portb & (0x1 << 10)) >> 7) // B10 (3) - | ((portb & (0x1 << 12)) >> 8) // B12 (4) - | ((portb & (0x1 << 2)) << 3) // B2 (5) - | ((porta & (0x1 << 8)) >> 2)); // A8 (6) + matrix_row_t cols = ~(((porta & (0x1 << 0)) >> 0) // A0 (0) + | ((portb & (0x1 << 11)) >> 10) // B11 (1) + | ((portb & (0x1 << 0)) << 2) // B0 (2) + | ((portb & (0x1 << 10)) >> 7) // B10 (3) + | ((portb & (0x1 << 12)) >> 8) // B12 (4) + | ((portb & (0x1 << 2)) << 3) // B2 (5) + | ((porta & (0x1 << 8)) >> 2)); // A8 (6) +// clang-format on /* Reverse the order of columns for left hand as the board is flipped. */ // if (isLeftHand) { @@ -50,7 +64,7 @@ void matrix_read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) /* Drive row pin high again. */ ATOMIC_BLOCK_FORCEON { writePinHigh(row_pins[current_row]); } - matrix_output_unselect_delay(current_row, row_pins[current_row] != 0); + matrix_output_unselect_delay(current_row, cols != 0); } #if defined(BUSY_WAIT) diff --git a/keyboards/rgbkb/mun/rules.mk b/keyboards/rgbkb/mun/rules.mk index 145d9d4aa8..e81196f9ee 100644 --- a/keyboards/rgbkb/mun/rules.mk +++ b/keyboards/rgbkb/mun/rules.mk @@ -39,7 +39,7 @@ OPT = 3 OPT_DEFS += -DOLED_FONT_H=\"../common/glcdfont.c\" OPT_DEFS += -Ikeyboards/rgbkb/common -# matrix optimisations (broken, will fix later) -#SRC += matrix.c +# matrix optimisations +SRC += matrix.c DEFAULT_FOLDER = rgbkb/mun/rev1 From e25d37454c9c228003651ba5eeae468930ae572d Mon Sep 17 00:00:00 2001 From: Ben Lipson Date: Sun, 19 Sep 2021 15:23:40 -0500 Subject: [PATCH 049/595] [Keymap] blipson corne keymap (#14469) revert lib/chibios revert lib/chibios Finish up remove files Update copyrights remove copyrights readd copyrights add stop macro PR suggestions PR suggestions readme lowercase fix rotate for oled Co-authored-by: Z003YW4 --- keyboards/crkbd/keymaps/blipson/blipsonfont.c | 232 ++++++++++++++++++ keyboards/crkbd/keymaps/blipson/config.h | 51 ++++ keyboards/crkbd/keymaps/blipson/keymap.c | 139 +++++++++++ keyboards/crkbd/keymaps/blipson/readme.md | 10 + keyboards/crkbd/keymaps/blipson/rules.mk | 3 + 5 files changed, 435 insertions(+) create mode 100644 keyboards/crkbd/keymaps/blipson/blipsonfont.c create mode 100644 keyboards/crkbd/keymaps/blipson/config.h create mode 100644 keyboards/crkbd/keymaps/blipson/keymap.c create mode 100644 keyboards/crkbd/keymaps/blipson/readme.md create mode 100644 keyboards/crkbd/keymaps/blipson/rules.mk diff --git a/keyboards/crkbd/keymaps/blipson/blipsonfont.c b/keyboards/crkbd/keymaps/blipson/blipsonfont.c new file mode 100644 index 0000000000..48f8de2c2e --- /dev/null +++ b/keyboards/crkbd/keymaps/blipson/blipsonfont.c @@ -0,0 +1,232 @@ +// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0. +// See gfxfont.h for newer custom bitmap font info. + +#include "progmem.h" + +// Standard ASCII 5x7 font +const unsigned char font[] PROGMEM = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00, + 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00, + 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00, + 0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00, + 0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00, + 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00, + 0x00, 0x18, 0x3C, 0x18, 0x00, 0x00, + 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00, + 0x00, 0x18, 0x24, 0x18, 0x00, 0x00, + 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00, + 0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00, + 0x26, 0x29, 0x79, 0x29, 0x26, 0x00, + 0x40, 0x7F, 0x05, 0x05, 0x07, 0x00, + 0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00, + 0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00, + 0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00, + 0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00, + 0x14, 0x22, 0x7F, 0x22, 0x14, 0x00, + 0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00, + 0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00, + 0x00, 0x66, 0x89, 0x95, 0x6A, 0x00, + 0x60, 0x60, 0x60, 0x60, 0x60, 0x00, + 0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00, + 0x08, 0x04, 0x7E, 0x04, 0x08, 0x00, + 0x10, 0x20, 0x7E, 0x20, 0x10, 0x00, + 0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00, + 0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00, + 0x1E, 0x10, 0x10, 0x10, 0x10, 0x00, + 0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00, + 0x30, 0x38, 0x3E, 0x38, 0x30, 0x00, + 0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x5F, 0x00, 0x00, 0x00, + 0x00, 0x07, 0x00, 0x07, 0x00, 0x00, + 0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00, + 0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00, + 0x23, 0x13, 0x08, 0x64, 0x62, 0x00, + 0x36, 0x49, 0x56, 0x20, 0x50, 0x00, + 0x00, 0x08, 0x07, 0x03, 0x00, 0x00, + 0x00, 0x1C, 0x22, 0x41, 0x00, 0x00, + 0x00, 0x41, 0x22, 0x1C, 0x00, 0x00, + 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00, + 0x08, 0x08, 0x3E, 0x08, 0x08, 0x00, + 0x00, 0x80, 0x70, 0x30, 0x00, 0x00, + 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, + 0x00, 0x00, 0x60, 0x60, 0x00, 0x00, + 0x20, 0x10, 0x08, 0x04, 0x02, 0x00, + 0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00, + 0x00, 0x42, 0x7F, 0x40, 0x00, 0x00, + 0x72, 0x49, 0x49, 0x49, 0x46, 0x00, + 0x21, 0x41, 0x49, 0x4D, 0x33, 0x00, + 0x18, 0x14, 0x12, 0x7F, 0x10, 0x00, + 0x27, 0x45, 0x45, 0x45, 0x39, 0x00, + 0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00, + 0x41, 0x21, 0x11, 0x09, 0x07, 0x00, + 0x36, 0x49, 0x49, 0x49, 0x36, 0x00, + 0x46, 0x49, 0x49, 0x29, 0x1E, 0x00, + 0x00, 0x00, 0x14, 0x00, 0x00, 0x00, + 0x00, 0x40, 0x34, 0x00, 0x00, 0x00, + 0x00, 0x08, 0x14, 0x22, 0x41, 0x00, + 0x14, 0x14, 0x14, 0x14, 0x14, 0x00, + 0x00, 0x41, 0x22, 0x14, 0x08, 0x00, + 0x02, 0x01, 0x59, 0x09, 0x06, 0x00, + 0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00, + 0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00, + 0x7F, 0x49, 0x49, 0x49, 0x36, 0x00, + 0x3E, 0x41, 0x41, 0x41, 0x22, 0x00, + 0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00, + 0x7F, 0x49, 0x49, 0x49, 0x41, 0x00, + 0x7F, 0x09, 0x09, 0x09, 0x01, 0x00, + 0x3E, 0x41, 0x41, 0x51, 0x73, 0x00, + 0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00, + 0x00, 0x41, 0x7F, 0x41, 0x00, 0x00, + 0x20, 0x40, 0x41, 0x3F, 0x01, 0x00, + 0x7F, 0x08, 0x14, 0x22, 0x41, 0x00, + 0x7F, 0x40, 0x40, 0x40, 0x40, 0x00, + 0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00, + 0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00, + 0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00, + 0x7F, 0x09, 0x09, 0x09, 0x06, 0x00, + 0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00, + 0x7F, 0x09, 0x19, 0x29, 0x46, 0x00, + 0x26, 0x49, 0x49, 0x49, 0x32, 0x00, + 0x03, 0x01, 0x7F, 0x01, 0x03, 0x00, + 0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00, + 0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00, + 0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00, + 0x63, 0x14, 0x08, 0x14, 0x63, 0x00, + 0x03, 0x04, 0x78, 0x04, 0x03, 0x00, + 0x61, 0x59, 0x49, 0x4D, 0x43, 0x00, + 0x00, 0x7F, 0x41, 0x41, 0x41, 0x00, + 0x02, 0x04, 0x08, 0x10, 0x20, 0x00, + 0x00, 0x41, 0x41, 0x41, 0x7F, 0x00, + 0x04, 0x02, 0x01, 0x02, 0x04, 0x00, + 0x40, 0x40, 0x40, 0x40, 0x40, 0x00, + 0x00, 0x03, 0x07, 0x08, 0x00, 0x00, + 0x20, 0x54, 0x54, 0x78, 0x40, 0x00, + 0x7F, 0x28, 0x44, 0x44, 0x38, 0x00, + 0x38, 0x44, 0x44, 0x44, 0x28, 0x00, + 0x38, 0x44, 0x44, 0x28, 0x7F, 0x00, + 0x38, 0x54, 0x54, 0x54, 0x18, 0x00, + 0x00, 0x08, 0x7E, 0x09, 0x02, 0x00, + 0x18, 0x24, 0x24, 0x1C, 0x18, 0x00, + 0x7F, 0x08, 0x04, 0x04, 0x78, 0x00, + 0x00, 0x44, 0x7D, 0x40, 0x00, 0x00, + 0x20, 0x40, 0x40, 0x3D, 0x00, 0x00, + 0x7F, 0x10, 0x28, 0x44, 0x00, 0x00, + 0x00, 0x41, 0x7F, 0x40, 0x00, 0x00, + 0x7C, 0x04, 0x78, 0x04, 0x78, 0x00, + 0x7C, 0x08, 0x04, 0x04, 0x78, 0x00, + 0x38, 0x44, 0x44, 0x44, 0x38, 0x00, + 0x7C, 0x18, 0x24, 0x24, 0x18, 0x00, + 0x18, 0x24, 0x24, 0x18, 0x7C, 0x00, + 0x7C, 0x08, 0x04, 0x04, 0x08, 0x00, + 0x48, 0x54, 0x54, 0x54, 0x24, 0x00, + 0x04, 0x04, 0x3F, 0x44, 0x24, 0x00, + 0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00, + 0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00, + 0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00, + 0x44, 0x28, 0x10, 0x28, 0x44, 0x00, + 0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00, + 0x44, 0x64, 0x54, 0x4C, 0x44, 0x00, + 0x00, 0x08, 0x36, 0x41, 0x00, 0x00, + 0x00, 0x00, 0x77, 0x00, 0x00, 0x00, + 0x00, 0x41, 0x36, 0x08, 0x00, 0x00, + 0x02, 0x01, 0x02, 0x04, 0x02, 0x00, + 0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xE0, 0xE0, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xFC, 0xFC, + 0xFC, 0xFC, 0xFC, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0xC0, 0xC0, 0x00, 0x00, 0x80, + 0xC0, 0xE0, 0x60, 0x60, 0xE0, 0xC0, + 0x80, 0x00, 0x00, 0x80, 0xC0, 0xC0, + 0xC0, 0x80, 0x00, 0x00, 0x00, 0x00, + 0x80, 0xC0, 0xC0, 0xC0, 0x80, 0x00, + 0x00, 0x00, 0xC0, 0x80, 0xC0, 0xC0, + 0xC0, 0x80, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xE0, 0xF0, 0xF0, 0xF0, 0xE0, 0xEC, + 0xEE, 0xF7, 0xF3, 0x70, 0x20, 0x00, + 0x7C, 0x7C, 0x7C, 0x7E, 0x00, 0x7E, + 0x7E, 0x7E, 0x7F, 0x7F, 0x7F, 0x00, + 0x00, 0x80, 0xC0, 0xE0, 0x7E, 0x5B, + 0x4F, 0x5B, 0xFE, 0xC0, 0x00, 0x00, + 0xC0, 0x00, 0xDC, 0xD7, 0xDE, 0xDE, + 0xDE, 0xD7, 0xDC, 0x00, 0xC0, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xFF, 0xFF, 0x30, 0x18, 0x18, 0x38, + 0xF0, 0xE0, 0x00, 0x00, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0xFE, 0xFE, 0x00, 0x00, 0xFF, + 0xFF, 0x18, 0x30, 0x30, 0x38, 0x1F, + 0x0F, 0x00, 0x8F, 0x1F, 0x38, 0x30, + 0x70, 0xE3, 0xC7, 0x00, 0x00, 0xFF, + 0xFF, 0x01, 0x00, 0x01, 0xFF, 0xFF, + 0x00, 0x00, 0xFF, 0xFF, 0x01, 0x00, + 0x01, 0xFF, 0xFF, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x0F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F, + 0x7F, 0x7F, 0x3F, 0x1E, 0x0C, 0x00, + 0x1F, 0x1F, 0x1F, 0x3F, 0x00, 0x3F, + 0x3F, 0x3F, 0x7F, 0x7F, 0x7F, 0x00, + 0x30, 0x7B, 0x7F, 0x78, 0x30, 0x20, + 0x20, 0x30, 0x78, 0x7F, 0x3B, 0x00, + 0x03, 0x00, 0x0F, 0x7F, 0x0F, 0x0F, + 0x0F, 0x7F, 0x0F, 0x00, 0x03, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x03, 0x07, 0x0E, 0x0C, 0x0C, 0x0E, + 0x07, 0x03, 0x00, 0x00, 0x0F, 0x0F, + 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, + 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 0x00, + 0x00, 0x0F, 0x0F, 0x00, 0x00, 0x3F, + 0x3F, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x03, 0x07, 0x0C, 0x0C, + 0x0E, 0x07, 0x03, 0x00, 0x00, 0x03, + 0x07, 0x0E, 0x0C, 0x0E, 0x07, 0x03, + 0x00, 0x00, 0x0F, 0x0F, 0x00, 0x00, + 0x00, 0x0F, 0x0F, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +}; diff --git a/keyboards/crkbd/keymaps/blipson/config.h b/keyboards/crkbd/keymaps/blipson/config.h new file mode 100644 index 0000000000..1994795836 --- /dev/null +++ b/keyboards/crkbd/keymaps/blipson/config.h @@ -0,0 +1,51 @@ +/* +This is the c configuration file for the keymap + +Copyright 2015 Jack Humbert +Copyright 2020 Ben Lipson + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +/* Select hand configuration */ +#define MASTER_LEFT +// #define MASTER_RIGHT +// #define EE_HANDS + +#define TAPPING_FORCE_HOLD +#define TAPPING_TERM 100 + +#ifdef RGBLIGHT_ENABLE + #undef RGBLED_NUM + #define RGBLIGHT_EFFECT_BREATHING + #define RGBLIGHT_EFFECT_RAINBOW_MOOD + #define RGBLIGHT_EFFECT_RAINBOW_SWIRL + #define RGBLIGHT_EFFECT_SNAKE + #define RGBLIGHT_EFFECT_KNIGHT + #define RGBLIGHT_EFFECT_CHRISTMAS + #define RGBLIGHT_EFFECT_STATIC_GRADIENT + // #define RGBLIGHT_EFFECT_RGB_TEST + // #define RGBLIGHT_EFFECT_ALTERNATING + #define RGBLIGHT_EFFECT_TWINKLE + #define RGBLED_NUM 27 + #define RGBLIGHT_LIMIT_VAL 120 + #define RGBLIGHT_HUE_STEP 10 + #define RGBLIGHT_SAT_STEP 17 + #define RGBLIGHT_VAL_STEP 17 +#endif + +#define OLED_FONT_H "keyboards/crkbd/keymaps/blipson/blipsonfont.c" +#define SPLIT_LAYER_STATE_ENABLE diff --git a/keyboards/crkbd/keymaps/blipson/keymap.c b/keyboards/crkbd/keymaps/blipson/keymap.c new file mode 100644 index 0000000000..23491e11a6 --- /dev/null +++ b/keyboards/crkbd/keymaps/blipson/keymap.c @@ -0,0 +1,139 @@ +/* +Copyright 2019 @foostan +Copyright 2020 Ben Lipson + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_split_3x6_3( + //,-----------------------------------------------------. ,-----------------------------------------------------. + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| + MO(1), KC_LGUI, KC_SPC, KC_SPC, KC_RALT, MO(2) + //`--------------------------' `--------------------------' + + ), + + [1] = LAYOUT_split_3x6_3( + //,-----------------------------------------------------. ,-----------------------------------------------------. + KC_GRV, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_UP, KC_LPRN, KC_RPRN, KC_BSLS, + //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| + KC_LCTL, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_RIGHT, XXXXXXX, KC_ENT, + //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| + KC_LSFT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_INS, KC_END, KC_HOME, KC_PGDN, KC_PGUP, KC_RSFT, + //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| + _______, KC_LGUI, KC_SPC, KC_SPC, KC_RALT, MO(3) + //`--------------------------' `--------------------------' + ), + + [2] = LAYOUT_split_3x6_3( + //,-----------------------------------------------------. ,-----------------------------------------------------. + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, + //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| + KC_LCTL, KC_ASTR, KC_MINS, KC_PLUS, KC_LCBR, KC_RCBR, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| + KC_BSLS, KC_PIPE, KC_UNDS, KC_EQL, KC_LBRC, KC_RBRC, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + //|--------+--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------+--------| + MO(3), KC_LGUI, KC_SPC, KC_SPC, KC_RALT, _______ + //`--------------------------' `--------------------------' + ), + + [3] = LAYOUT_split_3x6_3( + //,-------------------------------------------------------------------------------. ,------------------------------------------------------------------. + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, RESET, + //|----------+------------+--------------+---------------+-----------+------------| |------------+------------+------------+--------+--------+---------| + KC_LCTL, A(KC_F12), A(G(KC_LEFT)), A(G(KC_RIGHT)), S(KC_F6), C(S(KC_D)), C(S(KC_R)), G(KC_LBRC), G(KC_RBRC), KC_F11, KC_F12, KC_MPLY, + //|----------+------------+--------------+---------------+-----------+------------| |------------+------------+------------+--------+--------+---------| + G(KC_F2), A(G(KC_F)), KC_MUTE, KC__VOLDOWN, KC__VOLUP, G(KC_GRV), C(G(KC_G)), KC_TAB, S(KC_TAB), KC_BRID, KC_BRIU, KC_CAPS, + //|----------+------------+--------------+---------------+-----------+------------+--------| |--------+------------+------------+------------+--------+--------+---------| + _______, KC_LGUI, KC_SPC, KC_SPC, KC_RALT, _______ + //`----------------------------------' `-------------------------------' + ) + }; + +#ifdef OLED_ENABLE +oled_rotation_t oled_init_user(oled_rotation_t rotation) { + if (!is_keyboard_left()) { + return OLED_ROTATION_180; // flips the display 180 degrees if offhand + } + return rotation; +} + +#define L_BASE 0 +#define L_LOWER 2 +#define L_RAISE 4 +#define L_ADJUST 8 + +void oled_render_layer_state(void) { + oled_write_P(PSTR("Layer: "), false); + switch (layer_state) { + case L_BASE: + oled_write_ln_P(PSTR("Default"), false); + break; + case L_LOWER: + oled_write_ln_P(PSTR("Lower"), false); + break; + case L_RAISE: + oled_write_ln_P(PSTR("Raise"), false); + break; + case L_ADJUST: + case L_ADJUST|L_LOWER: + case L_ADJUST|L_RAISE: + case L_ADJUST|L_LOWER|L_RAISE: + oled_write_ln_P(PSTR("Adjust"), false); + break; + } + oled_write_P(PSTR("I love Marce"), false); +} + +void render_bootmagic_status(bool status) { + /* Show Ctrl-Gui Swap options */ + static const char PROGMEM logo[][2][3] = { + {{0x97, 0x98, 0}, {0xb7, 0xb8, 0}}, + {{0x95, 0x96, 0}, {0xb5, 0xb6, 0}}, + }; + if (status) { + oled_write_ln_P(logo[0][0], false); + oled_write_ln_P(logo[0][1], false); + } else { + oled_write_ln_P(logo[1][0], false); + oled_write_ln_P(logo[1][1], false); + } +} + +void oled_render_logo(void) { + static const char PROGMEM crkbd_logo[] = { + 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94, + 0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4, + 0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4, + 0}; + oled_write_P(crkbd_logo, false); +} + +void oled_task_user(void) { + if (is_keyboard_master()) { + oled_render_layer_state(); + } else { + oled_render_logo(); + } +} + +#endif // OLED_ENABLE diff --git a/keyboards/crkbd/keymaps/blipson/readme.md b/keyboards/crkbd/keymaps/blipson/readme.md new file mode 100644 index 0000000000..5dfb926bc6 --- /dev/null +++ b/keyboards/crkbd/keymaps/blipson/readme.md @@ -0,0 +1,10 @@ +# bLipson +a keymap for the CRKBD/Corne geared towards professional software development on MacOS. + +#### Meant for use with the following tools: + +- [Intellij IDEA](https://www.jetbrains.com/idea/) +- [Rectangle](https://rectangleapp.com/) + +## Building +`make crkbd:blipson` diff --git a/keyboards/crkbd/keymaps/blipson/rules.mk b/keyboards/crkbd/keymaps/blipson/rules.mk new file mode 100644 index 0000000000..5cad39dbd2 --- /dev/null +++ b/keyboards/crkbd/keymaps/blipson/rules.mk @@ -0,0 +1,3 @@ +OLED_ENABLE = yes +RGBLIGHT_ENABLE = no +AUDIO_ENABLE = no From 28b8b578b055bf76b28f47f9fd02db351cacfa09 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Mon, 20 Sep 2021 14:15:07 +1000 Subject: [PATCH 050/595] compiledb: query include paths from gcc directly. (#14462) * Query include paths from gcc directly. * Change to -isystem * qmk format-python * tests --- .../qmk/cli/generate/compilation_database.py | 14 ++++++++++++-- 1 file changed, 12 insertions(+), 2 deletions(-) diff --git a/lib/python/qmk/cli/generate/compilation_database.py b/lib/python/qmk/cli/generate/compilation_database.py index 2748d96e7a..602635270c 100755 --- a/lib/python/qmk/cli/generate/compilation_database.py +++ b/lib/python/qmk/cli/generate/compilation_database.py @@ -1,7 +1,6 @@ """Creates a compilation database for the given keyboard build. """ -import itertools import json import os import re @@ -24,6 +23,16 @@ def system_libs(binary: str) -> List[Path]: """ cli.log.debug("searching for system library directory for binary: %s", binary) bin_path = shutil.which(binary) + + # Actually query xxxxxx-gcc to find its include paths. + if binary.endswith("gcc") or binary.endswith("g++"): + result = cli.run([binary, '-E', '-Wp,-v', '-'], capture_output=True, check=True, input='\n') + paths = [] + for line in result.stderr.splitlines(): + if line.startswith(" "): + paths.append(Path(line.strip()).resolve()) + return paths + return list(Path(bin_path).resolve().parent.parent.glob("*/include")) if bin_path else [] @@ -55,7 +64,8 @@ def parse_make_n(f: Iterator[str]) -> List[Dict[str, str]]: # we have a hit! this_cmd = m.group(1) args = shlex.split(this_cmd) - args += ['-I%s' % s for s in system_libs(args[0])] + for s in system_libs(args[0]): + args += ['-isystem', '%s' % s] new_cmd = ' '.join(shlex.quote(s) for s in args if s != '-mno-thumb-interwork') records.append({"directory": str(QMK_FIRMWARE.resolve()), "command": new_cmd, "file": this_file}) state = 'start' From 574b6734afb6ec7073f6fb816dd454f03b7eb26f Mon Sep 17 00:00:00 2001 From: Ryan Date: Mon, 20 Sep 2021 16:51:00 +1000 Subject: [PATCH 051/595] Remove backlight pin references in rules.mk (#14513) --- keyboards/0xcb/1337/rules.mk | 2 +- keyboards/1upkeyboards/super16/rules.mk | 2 +- keyboards/40percentclub/25/rules.mk | 2 +- keyboards/40percentclub/4x4/rules.mk | 2 +- keyboards/40percentclub/6lit/rules.mk | 2 +- keyboards/40percentclub/foobar/rules.mk | 2 +- keyboards/40percentclub/half_n_half/rules.mk | 2 +- keyboards/40percentclub/i75/rules.mk | 2 +- keyboards/40percentclub/mf68/rules.mk | 2 +- keyboards/40percentclub/nein/rules.mk | 2 +- keyboards/40percentclub/nori/rules.mk | 2 +- keyboards/40percentclub/ut47/rules.mk | 2 +- keyboards/acheron/shark/rules.mk | 2 +- keyboards/aeboards/aegis/rules.mk | 2 +- keyboards/aeboards/ext65/rev1/rules.mk | 2 +- keyboards/ai03/lunar/rules.mk | 2 +- keyboards/ai03/orbit/rules.mk | 2 +- keyboards/ai03/quasar/rules.mk | 2 +- keyboards/ai03/soyuz/rules.mk | 2 +- keyboards/akb/eb46/rules.mk | 2 +- keyboards/akb/raine/rules.mk | 2 +- keyboards/alf/dc60/rules.mk | 2 +- keyboards/alf/x11/rules.mk | 2 +- keyboards/amjkeyboard/amj66/rules.mk | 2 +- keyboards/angel64/rules.mk | 2 +- keyboards/ashpil/modelm_usbc/rules.mk | 2 +- keyboards/atreus/rules.mk | 2 +- keyboards/baguette/rules.mk | 2 +- keyboards/beatervan/rules.mk | 2 +- keyboards/blockey/rules.mk | 2 +- keyboards/bpiphany/frosty_flake/rules.mk | 2 +- keyboards/bpiphany/kitten_paw/rules.mk | 2 +- keyboards/bpiphany/sixshooter/rules.mk | 2 +- keyboards/bpiphany/tiger_lily/rules.mk | 2 +- keyboards/bpiphany/unloved_bastard/rules.mk | 2 +- keyboards/bthlabs/geekpad/rules.mk | 2 +- keyboards/business_card/alpha/rules.mk | 2 +- keyboards/business_card/beta/rules.mk | 2 +- keyboards/business_card/rules.mk | 2 +- keyboards/c39/keymaps/drashna/rules.mk | 26 +++++++------------ keyboards/c39/rules.mk | 2 +- keyboards/ckeys/handwire_101/rules.mk | 2 +- keyboards/ckeys/nakey/rules.mk | 2 +- keyboards/ckeys/obelus/rules.mk | 2 +- keyboards/cocoa40/rules.mk | 2 +- keyboards/contra/rules.mk | 2 +- keyboards/converter/modelm101/rules.mk | 2 +- .../converter/numeric_keypad_IIe/rules.mk | 2 +- keyboards/converter/usb_usb/ble/rules.mk | 2 +- .../copenhagen_click/click_pad_v1/rules.mk | 2 +- keyboards/coseyfannitutti/discipad/rules.mk | 2 +- keyboards/coseyfannitutti/discipline/rules.mk | 2 +- keyboards/coseyfannitutti/mullet/rules.mk | 2 +- keyboards/coseyfannitutti/mulletpad/rules.mk | 2 +- keyboards/coseyfannitutti/mysterium/rules.mk | 2 +- keyboards/cu24/rules.mk | 2 +- keyboards/dc01/arrow/rules.mk | 2 +- keyboards/dc01/left/rules.mk | 2 +- keyboards/dc01/numpad/rules.mk | 2 +- keyboards/dc01/right/rules.mk | 2 +- keyboards/dm9records/plaid/rules.mk | 2 +- keyboards/dm9records/tartan/rules.mk | 2 +- keyboards/doro67/multi/rules.mk | 2 +- keyboards/doro67/regular/rules.mk | 2 +- keyboards/doro67/rgb/rules.mk | 2 +- keyboards/dp60/rules.mk | 2 +- keyboards/ep/40/rules.mk | 2 +- keyboards/ep/96/rules.mk | 2 +- keyboards/ep/comsn/hs68/rules.mk | 2 +- keyboards/ep/comsn/mollydooker/rules.mk | 2 +- keyboards/ep/comsn/tf_longeboye/rules.mk | 2 +- .../ericrlau/numdiscipline/rev1/rules.mk | 2 +- keyboards/exclusive/e6_rgb/rules.mk | 2 +- keyboards/exclusive/e6v2/le/rules.mk | 2 +- keyboards/exclusive/e6v2/le_bmc/rules.mk | 2 +- keyboards/exclusive/e6v2/oe/rules.mk | 2 +- keyboards/exclusive/e6v2/oe_bmc/rules.mk | 2 +- keyboards/flehrad/downbubble/rules.mk | 2 +- keyboards/fleuron/rules.mk | 2 +- keyboards/fluorite/rules.mk | 2 +- keyboards/foxlab/leaf60/hotswap/rules.mk | 2 +- keyboards/foxlab/leaf60/universal/rules.mk | 2 +- keyboards/fractal/rules.mk | 2 +- keyboards/geekboards/tester/rules.mk | 2 +- keyboards/gingham/rules.mk | 2 +- keyboards/gray_studio/space65/rules.mk | 2 +- keyboards/halberd/rules.mk | 2 +- .../handwired/108key_trackpoint/rules.mk | 2 +- keyboards/handwired/412_64/rules.mk | 2 +- keyboards/handwired/cmd60/rules.mk | 2 +- keyboards/handwired/co60/rev1/rules.mk | 2 +- keyboards/handwired/colorlice/rules.mk | 2 +- keyboards/handwired/datahand/rules.mk | 2 +- keyboards/handwired/fivethirteen/rules.mk | 2 +- keyboards/handwired/frenchdev/rules.mk | 2 +- keyboards/handwired/gamenum/rules.mk | 2 +- keyboards/handwired/hacked_motospeed/rules.mk | 2 +- keyboards/handwired/hnah40/rules.mk | 2 +- keyboards/handwired/ibm122m/rules.mk | 2 +- keyboards/handwired/jn68m/rules.mk | 2 +- keyboards/handwired/kbod/rules.mk | 2 +- keyboards/handwired/magicforce61/rules.mk | 2 +- keyboards/handwired/magicforce68/rules.mk | 2 +- .../handwired/mechboards_micropad/rules.mk | 2 +- keyboards/handwired/ms_sculpt_mobile/rules.mk | 2 +- keyboards/handwired/numpad20/rules.mk | 2 +- keyboards/handwired/ortho5x13/rules.mk | 2 +- keyboards/handwired/pilcrow/rules.mk | 2 +- keyboards/handwired/prime_exl/rules.mk | 2 +- keyboards/handwired/reddot/rules.mk | 2 +- keyboards/handwired/symmetry60/rules.mk | 2 +- keyboards/handwired/tennie/rules.mk | 2 +- keyboards/handwired/trackpoint/rules.mk | 2 +- keyboards/hecomi/alpha/rules.mk | 2 +- keyboards/hecomi/rules.mk | 2 +- keyboards/hineybush/h87a/rules.mk | 2 +- keyboards/hineybush/h88/rules.mk | 2 +- keyboards/hineybush/hbcp/rules.mk | 2 +- keyboards/hineybush/hineyg80/rules.mk | 2 +- keyboards/hs60/v1/rules.mk | 2 +- keyboards/idobo/rules.mk | 2 +- keyboards/illuminati/is0/rules.mk | 2 +- keyboards/jc65/v32u4/rules.mk | 2 +- keyboards/kagamidget/rules.mk | 2 +- keyboards/kbdfans/kbd19x/rules.mk | 2 +- keyboards/kbdfans/kbd4x/rules.mk | 2 +- keyboards/kbdfans/kbd66/rules.mk | 2 +- keyboards/kbdfans/kbd67/hotswap/rules.mk | 2 +- .../kbdfans/kbd67/mkii_soldered/rules.mk | 2 +- keyboards/kbdfans/kbd67/rev1/rules.mk | 2 +- keyboards/kbdfans/kbd67/rev2/rules.mk | 2 +- keyboards/kbdfans/kbd6x/rules.mk | 2 +- keyboards/kbdfans/kbd8x_mk2/rules.mk | 2 +- keyboards/kbdfans/kbdpad_mk2/rules.mk | 2 +- keyboards/kc60se/rules.mk | 2 +- keyboards/keebio/bdn9/rev1/rules.mk | 2 +- keyboards/keebio/tragicforce68/rules.mk | 2 +- keyboards/keyhive/maypad/rules.mk | 2 +- keyboards/kinesis/rules.mk | 2 +- keyboards/kingly_keys/romac_plus/rules.mk | 2 +- keyboards/kingly_keys/ropro/rules.mk | 2 +- keyboards/kingly_keys/soap/rules.mk | 2 +- keyboards/kira75/rules.mk | 2 +- keyboards/knops/mini/rules.mk | 2 +- keyboards/kona_classic/rules.mk | 2 +- keyboards/kprepublic/bm16a/rules.mk | 2 +- keyboards/kprepublic/jj40/rules.mk | 2 +- keyboards/kprepublic/jj4x4/rules.mk | 2 +- keyboards/ktec/staryu/rules.mk | 2 +- keyboards/kudox/rules.mk | 2 +- keyboards/kudox_game/rules.mk | 2 +- keyboards/massdrop/alt/rules.mk | 2 +- keyboards/massdrop/ctrl/rules.mk | 2 +- keyboards/maxipad/rules.mk | 2 +- keyboards/mechkeys/mk60/rules.mk | 2 +- keyboards/meishi/rules.mk | 2 +- keyboards/meishi2/rules.mk | 2 +- keyboards/meme/rules.mk | 2 +- keyboards/meson/rules.mk | 2 +- keyboards/miniaxe/rules.mk | 2 +- keyboards/mint60/rules.mk | 2 +- keyboards/miuni32/rules.mk | 2 +- keyboards/moon/rules.mk | 2 +- keyboards/namecard2x4/rules.mk | 2 +- keyboards/nek_type_a/rules.mk | 2 +- keyboards/noxary/220/rules.mk | 2 +- keyboards/noxary/260/rules.mk | 2 +- keyboards/noxary/268_2/rules.mk | 2 +- keyboards/noxary/280/rules.mk | 2 +- keyboards/otaku_split/rev0/rules.mk | 2 +- keyboards/otaku_split/rev1/rules.mk | 2 +- keyboards/pdxkbc/rules.mk | 2 +- keyboards/pico/rules.mk | 2 +- keyboards/primekb/prime_o/rules.mk | 2 +- keyboards/quantrik/kyuu/rules.mk | 2 +- keyboards/redox/rules.mk | 2 +- keyboards/redscarf_iiplus/verb/rules.mk | 2 +- keyboards/redscarf_iiplus/verc/rules.mk | 2 +- keyboards/redscarf_iiplus/verd/rules.mk | 2 +- keyboards/reviung34/rules.mk | 2 +- keyboards/reviung39/rules.mk | 2 +- keyboards/rgbkb/zygomorph/rules.mk | 2 +- keyboards/runner3680/rules.mk | 2 +- keyboards/sck/osa/rules.mk | 2 +- keyboards/scythe/rules.mk | 2 +- keyboards/sentraq/number_pad/rules.mk | 2 +- keyboards/shiro/rules.mk | 2 +- keyboards/silverbullet44/rules.mk | 2 +- keyboards/smk60/rules.mk | 2 +- keyboards/snampad/rules.mk | 2 +- keyboards/spacetime/rules.mk | 2 +- keyboards/splitish/rules.mk | 2 +- keyboards/splitkb/kyria/rules.mk | 2 +- keyboards/standaside/rules.mk | 2 +- keyboards/suihankey/rules.mk | 2 +- keyboards/switchplate/southpaw_65/rules.mk | 2 +- keyboards/tender/macrowo_pad/rules.mk | 2 +- keyboards/the_ruler/rules.mk | 2 +- keyboards/thevankeyboards/caravan/rules.mk | 2 +- keyboards/thevankeyboards/minivan/rules.mk | 2 +- keyboards/thevankeyboards/roadkit/rules.mk | 2 +- keyboards/tkc/tkc1800/rules.mk | 2 +- keyboards/tmo50/rules.mk | 2 +- keyboards/treasure/type9/rules.mk | 2 +- keyboards/ut472/rules.mk | 2 +- keyboards/v60_type_r/rules.mk | 2 +- keyboards/westfoxtrot/cyclops/rules.mk | 2 +- keyboards/westfoxtrot/cypher/rev1/rules.mk | 2 +- keyboards/westfoxtrot/cypher/rev5/rules.mk | 2 +- .../wilba_tech/rama_works_m10_b/rules.mk | 2 +- .../wilba_tech/rama_works_u80_a/rules.mk | 2 +- keyboards/wilba_tech/wt60_a/rules.mk | 2 +- keyboards/wilba_tech/wt60_d/rules.mk | 2 +- keyboards/wilba_tech/wt65_a/rules.mk | 2 +- keyboards/wilba_tech/wt65_b/rules.mk | 2 +- keyboards/wilba_tech/wt69_a/rules.mk | 2 +- keyboards/wilba_tech/wt75_a/rules.mk | 2 +- keyboards/wilba_tech/wt75_b/rules.mk | 2 +- keyboards/wilba_tech/wt75_c/rules.mk | 2 +- keyboards/wilba_tech/wt80_a/rules.mk | 2 +- keyboards/wilba_tech/wt80_bc/rules.mk | 2 +- keyboards/wilba_tech/wt8_a/rules.mk | 2 +- keyboards/wsk/gothic50/rules.mk | 2 +- keyboards/wsk/gothic70/rules.mk | 2 +- keyboards/xelus/dawn60/rev1/rules.mk | 2 +- keyboards/xelus/dawn60/rev1_qmk/rules.mk | 2 +- keyboards/xelus/pachi/rgb/rules.mk | 2 +- keyboards/xelus/snap96/rules.mk | 2 +- keyboards/xiudi/xd002/rules.mk | 2 +- keyboards/xiudi/xd84/rules.mk | 2 +- keyboards/xiudi/xd87/rules.mk | 2 +- keyboards/yd68/rules.mk | 2 +- 232 files changed, 240 insertions(+), 248 deletions(-) diff --git a/keyboards/0xcb/1337/rules.mk b/keyboards/0xcb/1337/rules.mk index 0ea1876123..5bcc37be16 100644 --- a/keyboards/0xcb/1337/rules.mk +++ b/keyboards/0xcb/1337/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/1upkeyboards/super16/rules.mk b/keyboards/1upkeyboards/super16/rules.mk index 6b80659847..2567b24e3e 100644 --- a/keyboards/1upkeyboards/super16/rules.mk +++ b/keyboards/1upkeyboards/super16/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGB_MATRIX_ENABLE = yes RGB_MATRIX_DRIVER = WS2812 diff --git a/keyboards/40percentclub/25/rules.mk b/keyboards/40percentclub/25/rules.mk index a0a789ad26..3d6e67d625 100644 --- a/keyboards/40percentclub/25/rules.mk +++ b/keyboards/40percentclub/25/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/40percentclub/4x4/rules.mk b/keyboards/40percentclub/4x4/rules.mk index d857f223c9..863979e88e 100644 --- a/keyboards/40percentclub/4x4/rules.mk +++ b/keyboards/40percentclub/4x4/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/40percentclub/6lit/rules.mk b/keyboards/40percentclub/6lit/rules.mk index f01a490ef1..265e24a623 100644 --- a/keyboards/40percentclub/6lit/rules.mk +++ b/keyboards/40percentclub/6lit/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/40percentclub/foobar/rules.mk b/keyboards/40percentclub/foobar/rules.mk index af7b02a3d9..0fa420606f 100644 --- a/keyboards/40percentclub/foobar/rules.mk +++ b/keyboards/40percentclub/foobar/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/40percentclub/half_n_half/rules.mk b/keyboards/40percentclub/half_n_half/rules.mk index d24a463423..b6f115026c 100644 --- a/keyboards/40percentclub/half_n_half/rules.mk +++ b/keyboards/40percentclub/half_n_half/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/40percentclub/i75/rules.mk b/keyboards/40percentclub/i75/rules.mk index b54de9842b..5d301d6144 100644 --- a/keyboards/40percentclub/i75/rules.mk +++ b/keyboards/40percentclub/i75/rules.mk @@ -10,7 +10,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/40percentclub/mf68/rules.mk b/keyboards/40percentclub/mf68/rules.mk index cbe907c517..7fd24401c5 100644 --- a/keyboards/40percentclub/mf68/rules.mk +++ b/keyboards/40percentclub/mf68/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/40percentclub/nein/rules.mk b/keyboards/40percentclub/nein/rules.mk index ff2ad1b002..c142e2896f 100644 --- a/keyboards/40percentclub/nein/rules.mk +++ b/keyboards/40percentclub/nein/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/40percentclub/nori/rules.mk b/keyboards/40percentclub/nori/rules.mk index 588e543d90..baa50f5d0c 100644 --- a/keyboards/40percentclub/nori/rules.mk +++ b/keyboards/40percentclub/nori/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/40percentclub/ut47/rules.mk b/keyboards/40percentclub/ut47/rules.mk index 8451db0389..ce388d1834 100644 --- a/keyboards/40percentclub/ut47/rules.mk +++ b/keyboards/40percentclub/ut47/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/acheron/shark/rules.mk b/keyboards/acheron/shark/rules.mk index 03c4f61cdd..50e41b1c70 100644 --- a/keyboards/acheron/shark/rules.mk +++ b/keyboards/acheron/shark/rules.mk @@ -17,7 +17,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/aeboards/aegis/rules.mk b/keyboards/aeboards/aegis/rules.mk index edeacb70c9..3e1ec4ab25 100644 --- a/keyboards/aeboards/aegis/rules.mk +++ b/keyboards/aeboards/aegis/rules.mk @@ -16,6 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/aeboards/ext65/rev1/rules.mk b/keyboards/aeboards/ext65/rev1/rules.mk index edeacb70c9..3e1ec4ab25 100644 --- a/keyboards/aeboards/ext65/rev1/rules.mk +++ b/keyboards/aeboards/ext65/rev1/rules.mk @@ -16,6 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/ai03/lunar/rules.mk b/keyboards/ai03/lunar/rules.mk index 2b1bc49491..c11b7ba3c9 100644 --- a/keyboards/ai03/lunar/rules.mk +++ b/keyboards/ai03/lunar/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/ai03/orbit/rules.mk b/keyboards/ai03/orbit/rules.mk index aca343cd14..9f368cc645 100644 --- a/keyboards/ai03/orbit/rules.mk +++ b/keyboards/ai03/orbit/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/ai03/quasar/rules.mk b/keyboards/ai03/quasar/rules.mk index 57ba83d801..09b19339ba 100644 --- a/keyboards/ai03/quasar/rules.mk +++ b/keyboards/ai03/quasar/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/ai03/soyuz/rules.mk b/keyboards/ai03/soyuz/rules.mk index 9e41337049..c9ccbe4e5d 100644 --- a/keyboards/ai03/soyuz/rules.mk +++ b/keyboards/ai03/soyuz/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/akb/eb46/rules.mk b/keyboards/akb/eb46/rules.mk index 22a83dff84..335f06bb0a 100644 --- a/keyboards/akb/eb46/rules.mk +++ b/keyboards/akb/eb46/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/akb/raine/rules.mk b/keyboards/akb/raine/rules.mk index 22a83dff84..335f06bb0a 100644 --- a/keyboards/akb/raine/rules.mk +++ b/keyboards/akb/raine/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/alf/dc60/rules.mk b/keyboards/alf/dc60/rules.mk index b55c0a8998..bf79fc89ca 100644 --- a/keyboards/alf/dc60/rules.mk +++ b/keyboards/alf/dc60/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/alf/x11/rules.mk b/keyboards/alf/x11/rules.mk index 386eb2a982..30b880a949 100644 --- a/keyboards/alf/x11/rules.mk +++ b/keyboards/alf/x11/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/amjkeyboard/amj66/rules.mk b/keyboards/amjkeyboard/amj66/rules.mk index 4e843e25e9..a4e8e6635d 100644 --- a/keyboards/amjkeyboard/amj66/rules.mk +++ b/keyboards/amjkeyboard/amj66/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/angel64/rules.mk b/keyboards/angel64/rules.mk index 3ba77eca4a..aeeae0a71a 100644 --- a/keyboards/angel64/rules.mk +++ b/keyboards/angel64/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/ashpil/modelm_usbc/rules.mk b/keyboards/ashpil/modelm_usbc/rules.mk index 00617fb4dc..9d8462a9c9 100644 --- a/keyboards/ashpil/modelm_usbc/rules.mk +++ b/keyboards/ashpil/modelm_usbc/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/atreus/rules.mk b/keyboards/atreus/rules.mk index 30a12fe01d..e252aa7c04 100644 --- a/keyboards/atreus/rules.mk +++ b/keyboards/atreus/rules.mk @@ -10,7 +10,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = yes # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/baguette/rules.mk b/keyboards/baguette/rules.mk index 1aa5794a60..a8c97d8b53 100644 --- a/keyboards/baguette/rules.mk +++ b/keyboards/baguette/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/beatervan/rules.mk b/keyboards/beatervan/rules.mk index 6739ba137a..d6f7511eab 100644 --- a/keyboards/beatervan/rules.mk +++ b/keyboards/beatervan/rules.mk @@ -16,6 +16,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = yes # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/blockey/rules.mk b/keyboards/blockey/rules.mk index e00cd40b0d..976815e8f5 100644 --- a/keyboards/blockey/rules.mk +++ b/keyboards/blockey/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/bpiphany/frosty_flake/rules.mk b/keyboards/bpiphany/frosty_flake/rules.mk index 1d2a19734c..b9749f4a2f 100644 --- a/keyboards/bpiphany/frosty_flake/rules.mk +++ b/keyboards/bpiphany/frosty_flake/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/bpiphany/kitten_paw/rules.mk b/keyboards/bpiphany/kitten_paw/rules.mk index e18f8f3c37..92b4a6ee94 100644 --- a/keyboards/bpiphany/kitten_paw/rules.mk +++ b/keyboards/bpiphany/kitten_paw/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/bpiphany/sixshooter/rules.mk b/keyboards/bpiphany/sixshooter/rules.mk index eb5c919089..c1f221b2c6 100644 --- a/keyboards/bpiphany/sixshooter/rules.mk +++ b/keyboards/bpiphany/sixshooter/rules.mk @@ -16,6 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/bpiphany/tiger_lily/rules.mk b/keyboards/bpiphany/tiger_lily/rules.mk index e18f8f3c37..92b4a6ee94 100644 --- a/keyboards/bpiphany/tiger_lily/rules.mk +++ b/keyboards/bpiphany/tiger_lily/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/bpiphany/unloved_bastard/rules.mk b/keyboards/bpiphany/unloved_bastard/rules.mk index cf96e2bc1a..1920185b1d 100644 --- a/keyboards/bpiphany/unloved_bastard/rules.mk +++ b/keyboards/bpiphany/unloved_bastard/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/bthlabs/geekpad/rules.mk b/keyboards/bthlabs/geekpad/rules.mk index 2935684f9b..e87d687463 100644 --- a/keyboards/bthlabs/geekpad/rules.mk +++ b/keyboards/bthlabs/geekpad/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/business_card/alpha/rules.mk b/keyboards/business_card/alpha/rules.mk index ad8290ca09..6849ace241 100644 --- a/keyboards/business_card/alpha/rules.mk +++ b/keyboards/business_card/alpha/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/business_card/beta/rules.mk b/keyboards/business_card/beta/rules.mk index ad8290ca09..6849ace241 100644 --- a/keyboards/business_card/beta/rules.mk +++ b/keyboards/business_card/beta/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/business_card/rules.mk b/keyboards/business_card/rules.mk index 6956c6d914..1ec1782d98 100644 --- a/keyboards/business_card/rules.mk +++ b/keyboards/business_card/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/c39/keymaps/drashna/rules.mk b/keyboards/c39/keymaps/drashna/rules.mk index 2cfa2e483b..c05f6a4be4 100644 --- a/keyboards/c39/keymaps/drashna/rules.mk +++ b/keyboards/c39/keymaps/drashna/rules.mk @@ -5,22 +5,14 @@ BOARD = QMK_PROTON_C # Bootloader selection BOOTLOADER = stm32-dfu -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) -COMMAND_ENABLE = yes # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default -MIDI_ENABLE = no # MIDI controls -UNICODE_ENABLE = yes # Unicode -BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = yes # Audio output on port C6 -RGBLIGHT_ENABLE = yes # RGB Enable / Disable +BOOTMAGIC_ENABLE = yes +MOUSEKEY_ENABLE = yes +EXTRAKEY_ENABLE = yes +CONSOLE_ENABLE = yes +COMMAND_ENABLE = yes +NKRO_ENABLE = yes +AUDIO_ENABLE = yes +UNICODE_ENABLE = yes +HAPTIC_ENABLE = SOLENOID RGBLIGHT_STARTUP_ANIMATION = yes - -HAPTIC_ENABLE = SOLENOID diff --git a/keyboards/c39/rules.mk b/keyboards/c39/rules.mk index 3469da6476..c197e7f658 100755 --- a/keyboards/c39/rules.mk +++ b/keyboards/c39/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 RGBLIGHT_ENABLE = no # RGB Enable / Disable diff --git a/keyboards/ckeys/handwire_101/rules.mk b/keyboards/ckeys/handwire_101/rules.mk index eab1ad584e..b8976c55a4 100755 --- a/keyboards/ckeys/handwire_101/rules.mk +++ b/keyboards/ckeys/handwire_101/rules.mk @@ -17,7 +17,7 @@ TERMINAL_ENABLE = yes SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/ckeys/nakey/rules.mk b/keyboards/ckeys/nakey/rules.mk index 594730c7a0..6874585cbe 100644 --- a/keyboards/ckeys/nakey/rules.mk +++ b/keyboards/ckeys/nakey/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/ckeys/obelus/rules.mk b/keyboards/ckeys/obelus/rules.mk index 88c64b7b22..848947d235 100644 --- a/keyboards/ckeys/obelus/rules.mk +++ b/keyboards/ckeys/obelus/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = yes # MIDI support UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = yes # Audio output on port C6 diff --git a/keyboards/cocoa40/rules.mk b/keyboards/cocoa40/rules.mk index 8496399265..398b70469e 100644 --- a/keyboards/cocoa40/rules.mk +++ b/keyboards/cocoa40/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/contra/rules.mk b/keyboards/contra/rules.mk index 6d3e0bba86..7b5aa05a5d 100755 --- a/keyboards/contra/rules.mk +++ b/keyboards/contra/rules.mk @@ -14,7 +14,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/converter/modelm101/rules.mk b/keyboards/converter/modelm101/rules.mk index 08d36d0b80..aebe723bf1 100644 --- a/keyboards/converter/modelm101/rules.mk +++ b/keyboards/converter/modelm101/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/converter/numeric_keypad_IIe/rules.mk b/keyboards/converter/numeric_keypad_IIe/rules.mk index cea762bc52..041dabc194 100644 --- a/keyboards/converter/numeric_keypad_IIe/rules.mk +++ b/keyboards/converter/numeric_keypad_IIe/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/converter/usb_usb/ble/rules.mk b/keyboards/converter/usb_usb/ble/rules.mk index 76af3e1fa3..c54138918b 100644 --- a/keyboards/converter/usb_usb/ble/rules.mk +++ b/keyboards/converter/usb_usb/ble/rules.mk @@ -10,7 +10,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID diff --git a/keyboards/copenhagen_click/click_pad_v1/rules.mk b/keyboards/copenhagen_click/click_pad_v1/rules.mk index 93d13ad4c4..f3224bae62 100755 --- a/keyboards/copenhagen_click/click_pad_v1/rules.mk +++ b/keyboards/copenhagen_click/click_pad_v1/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/coseyfannitutti/discipad/rules.mk b/keyboards/coseyfannitutti/discipad/rules.mk index 140dd3d0ec..29f8bd8e7e 100644 --- a/keyboards/coseyfannitutti/discipad/rules.mk +++ b/keyboards/coseyfannitutti/discipad/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/coseyfannitutti/discipline/rules.mk b/keyboards/coseyfannitutti/discipline/rules.mk index 38e233e250..73aa3a301f 100644 --- a/keyboards/coseyfannitutti/discipline/rules.mk +++ b/keyboards/coseyfannitutti/discipline/rules.mk @@ -19,7 +19,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/coseyfannitutti/mullet/rules.mk b/keyboards/coseyfannitutti/mullet/rules.mk index 473ee46038..25f9620114 100644 --- a/keyboards/coseyfannitutti/mullet/rules.mk +++ b/keyboards/coseyfannitutti/mullet/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/coseyfannitutti/mulletpad/rules.mk b/keyboards/coseyfannitutti/mulletpad/rules.mk index dc9466f211..bbe4c5ce6c 100644 --- a/keyboards/coseyfannitutti/mulletpad/rules.mk +++ b/keyboards/coseyfannitutti/mulletpad/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/coseyfannitutti/mysterium/rules.mk b/keyboards/coseyfannitutti/mysterium/rules.mk index b383be4f14..87c814e1af 100644 --- a/keyboards/coseyfannitutti/mysterium/rules.mk +++ b/keyboards/coseyfannitutti/mysterium/rules.mk @@ -19,7 +19,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/cu24/rules.mk b/keyboards/cu24/rules.mk index 2ac0ea6daa..e0ca0243ab 100644 --- a/keyboards/cu24/rules.mk +++ b/keyboards/cu24/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 RGBLIGHT_ENABLE = yes # RGB drivers diff --git a/keyboards/dc01/arrow/rules.mk b/keyboards/dc01/arrow/rules.mk index d9628b5600..9cf1c65d54 100644 --- a/keyboards/dc01/arrow/rules.mk +++ b/keyboards/dc01/arrow/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 NO_USB_STARTUP_CHECK = yes # Disable initialization only when usb is plugged in diff --git a/keyboards/dc01/left/rules.mk b/keyboards/dc01/left/rules.mk index 315590d7f6..bbfdff1d55 100644 --- a/keyboards/dc01/left/rules.mk +++ b/keyboards/dc01/left/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/dc01/numpad/rules.mk b/keyboards/dc01/numpad/rules.mk index e271fc4fd6..6b9f18c07d 100644 --- a/keyboards/dc01/numpad/rules.mk +++ b/keyboards/dc01/numpad/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 NO_USB_STARTUP_CHECK = yes # Disable initialization only when usb is plugged in diff --git a/keyboards/dc01/right/rules.mk b/keyboards/dc01/right/rules.mk index d9628b5600..9cf1c65d54 100644 --- a/keyboards/dc01/right/rules.mk +++ b/keyboards/dc01/right/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 NO_USB_STARTUP_CHECK = yes # Disable initialization only when usb is plugged in diff --git a/keyboards/dm9records/plaid/rules.mk b/keyboards/dm9records/plaid/rules.mk index 3484039642..810bcf4118 100644 --- a/keyboards/dm9records/plaid/rules.mk +++ b/keyboards/dm9records/plaid/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/dm9records/tartan/rules.mk b/keyboards/dm9records/tartan/rules.mk index b6e4e18e10..3b7605538f 100644 --- a/keyboards/dm9records/tartan/rules.mk +++ b/keyboards/dm9records/tartan/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/doro67/multi/rules.mk b/keyboards/doro67/multi/rules.mk index 2f23e0119d..678f3b3e2d 100644 --- a/keyboards/doro67/multi/rules.mk +++ b/keyboards/doro67/multi/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/doro67/regular/rules.mk b/keyboards/doro67/regular/rules.mk index 402fc08ad8..62d2b0a77b 100644 --- a/keyboards/doro67/regular/rules.mk +++ b/keyboards/doro67/regular/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/doro67/rgb/rules.mk b/keyboards/doro67/rgb/rules.mk index b91566bd4f..fc5dfa9ef1 100644 --- a/keyboards/doro67/rgb/rules.mk +++ b/keyboards/doro67/rgb/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/dp60/rules.mk b/keyboards/dp60/rules.mk index 4ad090edfc..d89f2287ac 100644 --- a/keyboards/dp60/rules.mk +++ b/keyboards/dp60/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 RGBLIGHT_ENABLE = no # Use RGB underglow light diff --git a/keyboards/ep/40/rules.mk b/keyboards/ep/40/rules.mk index f97c891e32..599233dc86 100644 --- a/keyboards/ep/40/rules.mk +++ b/keyboards/ep/40/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/ep/96/rules.mk b/keyboards/ep/96/rules.mk index f97c891e32..599233dc86 100644 --- a/keyboards/ep/96/rules.mk +++ b/keyboards/ep/96/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/ep/comsn/hs68/rules.mk b/keyboards/ep/comsn/hs68/rules.mk index ae061ce8e8..39160e9865 100644 --- a/keyboards/ep/comsn/hs68/rules.mk +++ b/keyboards/ep/comsn/hs68/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/ep/comsn/mollydooker/rules.mk b/keyboards/ep/comsn/mollydooker/rules.mk index 6fa2f947df..1bf22e08f5 100644 --- a/keyboards/ep/comsn/mollydooker/rules.mk +++ b/keyboards/ep/comsn/mollydooker/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/ep/comsn/tf_longeboye/rules.mk b/keyboards/ep/comsn/tf_longeboye/rules.mk index 22a83dff84..335f06bb0a 100644 --- a/keyboards/ep/comsn/tf_longeboye/rules.mk +++ b/keyboards/ep/comsn/tf_longeboye/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/ericrlau/numdiscipline/rev1/rules.mk b/keyboards/ericrlau/numdiscipline/rev1/rules.mk index d47666eba8..8ffda7cd69 100644 --- a/keyboards/ericrlau/numdiscipline/rev1/rules.mk +++ b/keyboards/ericrlau/numdiscipline/rev1/rules.mk @@ -19,7 +19,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/exclusive/e6_rgb/rules.mk b/keyboards/exclusive/e6_rgb/rules.mk index 88771409e1..c8cd855764 100644 --- a/keyboards/exclusive/e6_rgb/rules.mk +++ b/keyboards/exclusive/e6_rgb/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 RGBLIGHT_ENABLE = yes # Use RGB underglow light diff --git a/keyboards/exclusive/e6v2/le/rules.mk b/keyboards/exclusive/e6v2/le/rules.mk index f27d1c783c..b150e744e0 100644 --- a/keyboards/exclusive/e6v2/le/rules.mk +++ b/keyboards/exclusive/e6v2/le/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/exclusive/e6v2/le_bmc/rules.mk b/keyboards/exclusive/e6v2/le_bmc/rules.mk index 9c31840d6c..ed563747b9 100644 --- a/keyboards/exclusive/e6v2/le_bmc/rules.mk +++ b/keyboards/exclusive/e6v2/le_bmc/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality WS2812_DRIVER = i2c RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode diff --git a/keyboards/exclusive/e6v2/oe/rules.mk b/keyboards/exclusive/e6v2/oe/rules.mk index f27d1c783c..b150e744e0 100644 --- a/keyboards/exclusive/e6v2/oe/rules.mk +++ b/keyboards/exclusive/e6v2/oe/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/exclusive/e6v2/oe_bmc/rules.mk b/keyboards/exclusive/e6v2/oe_bmc/rules.mk index 9c31840d6c..ed563747b9 100644 --- a/keyboards/exclusive/e6v2/oe_bmc/rules.mk +++ b/keyboards/exclusive/e6v2/oe_bmc/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality WS2812_DRIVER = i2c RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode diff --git a/keyboards/flehrad/downbubble/rules.mk b/keyboards/flehrad/downbubble/rules.mk index b3d27a62c1..dd867d5b18 100644 --- a/keyboards/flehrad/downbubble/rules.mk +++ b/keyboards/flehrad/downbubble/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/fleuron/rules.mk b/keyboards/fleuron/rules.mk index 45bda39887..b8b64abd43 100644 --- a/keyboards/fleuron/rules.mk +++ b/keyboards/fleuron/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/fluorite/rules.mk b/keyboards/fluorite/rules.mk index 088e72949c..dc3c448405 100644 --- a/keyboards/fluorite/rules.mk +++ b/keyboards/fluorite/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/foxlab/leaf60/hotswap/rules.mk b/keyboards/foxlab/leaf60/hotswap/rules.mk index 83595897e2..15bb28a6e7 100644 --- a/keyboards/foxlab/leaf60/hotswap/rules.mk +++ b/keyboards/foxlab/leaf60/hotswap/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/foxlab/leaf60/universal/rules.mk b/keyboards/foxlab/leaf60/universal/rules.mk index 30eb3309a8..73bfb0aed4 100644 --- a/keyboards/foxlab/leaf60/universal/rules.mk +++ b/keyboards/foxlab/leaf60/universal/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/fractal/rules.mk b/keyboards/fractal/rules.mk index 7891c7d996..191568ecee 100755 --- a/keyboards/fractal/rules.mk +++ b/keyboards/fractal/rules.mk @@ -14,7 +14,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/geekboards/tester/rules.mk b/keyboards/geekboards/tester/rules.mk index 49dd082d0b..6316052f5a 100644 --- a/keyboards/geekboards/tester/rules.mk +++ b/keyboards/geekboards/tester/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 RGB_MATRIX_ENABLE = yes # Use RGB matrix diff --git a/keyboards/gingham/rules.mk b/keyboards/gingham/rules.mk index 1167c8304c..beb9c6a1b9 100644 --- a/keyboards/gingham/rules.mk +++ b/keyboards/gingham/rules.mk @@ -19,7 +19,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/gray_studio/space65/rules.mk b/keyboards/gray_studio/space65/rules.mk index 509d263d62..891fa2f991 100644 --- a/keyboards/gray_studio/space65/rules.mk +++ b/keyboards/gray_studio/space65/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/halberd/rules.mk b/keyboards/halberd/rules.mk index 2676a32c57..432e26a6fe 100644 --- a/keyboards/halberd/rules.mk +++ b/keyboards/halberd/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/handwired/108key_trackpoint/rules.mk b/keyboards/handwired/108key_trackpoint/rules.mk index 21475d4673..3c10538b60 100644 --- a/keyboards/handwired/108key_trackpoint/rules.mk +++ b/keyboards/handwired/108key_trackpoint/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/handwired/412_64/rules.mk b/keyboards/handwired/412_64/rules.mk index 1d0b1f7a15..c38410546e 100644 --- a/keyboards/handwired/412_64/rules.mk +++ b/keyboards/handwired/412_64/rules.mk @@ -16,6 +16,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/handwired/cmd60/rules.mk b/keyboards/handwired/cmd60/rules.mk index aec3e5814a..444eac251d 100644 --- a/keyboards/handwired/cmd60/rules.mk +++ b/keyboards/handwired/cmd60/rules.mk @@ -16,6 +16,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/handwired/co60/rev1/rules.mk b/keyboards/handwired/co60/rev1/rules.mk index bae60addc5..d4e739af50 100644 --- a/keyboards/handwired/co60/rev1/rules.mk +++ b/keyboards/handwired/co60/rev1/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 LEADER_ENABLE = yes # Turn on leader support diff --git a/keyboards/handwired/colorlice/rules.mk b/keyboards/handwired/colorlice/rules.mk index 54a1383f5c..794e3c7911 100644 --- a/keyboards/handwired/colorlice/rules.mk +++ b/keyboards/handwired/colorlice/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 LTO_ENABLE = yes # Use link time optimization diff --git a/keyboards/handwired/datahand/rules.mk b/keyboards/handwired/datahand/rules.mk index 28ee1fbc86..9f8043db46 100644 --- a/keyboards/handwired/datahand/rules.mk +++ b/keyboards/handwired/datahand/rules.mk @@ -11,7 +11,7 @@ EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = yes # Console for debug(+400) COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 CUSTOM_MATRIX = yes # We definitely have a nonstandard matrix diff --git a/keyboards/handwired/fivethirteen/rules.mk b/keyboards/handwired/fivethirteen/rules.mk index 5037114c96..22c8ef52a4 100644 --- a/keyboards/handwired/fivethirteen/rules.mk +++ b/keyboards/handwired/fivethirteen/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/handwired/frenchdev/rules.mk b/keyboards/handwired/frenchdev/rules.mk index 5dbe262574..d2494b8353 100644 --- a/keyboards/handwired/frenchdev/rules.mk +++ b/keyboards/handwired/frenchdev/rules.mk @@ -16,7 +16,7 @@ CUSTOM_MATRIX = yes # Custom matrix file (taken and adapted from the ErgoDox SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work UNICODE_ENABLE = yes # Unicode -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 RGBLIGHT_ENABLE = no diff --git a/keyboards/handwired/gamenum/rules.mk b/keyboards/handwired/gamenum/rules.mk index fef3fb9974..c2487a975b 100644 --- a/keyboards/handwired/gamenum/rules.mk +++ b/keyboards/handwired/gamenum/rules.mk @@ -16,6 +16,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/handwired/hacked_motospeed/rules.mk b/keyboards/handwired/hacked_motospeed/rules.mk index 7ba6a3af7f..e948879959 100644 --- a/keyboards/handwired/hacked_motospeed/rules.mk +++ b/keyboards/handwired/hacked_motospeed/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID diff --git a/keyboards/handwired/hnah40/rules.mk b/keyboards/handwired/hnah40/rules.mk index 7579c377d2..3184452049 100644 --- a/keyboards/handwired/hnah40/rules.mk +++ b/keyboards/handwired/hnah40/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/handwired/ibm122m/rules.mk b/keyboards/handwired/ibm122m/rules.mk index ef81b399cb..603dde425a 100644 --- a/keyboards/handwired/ibm122m/rules.mk +++ b/keyboards/handwired/ibm122m/rules.mk @@ -16,6 +16,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = yes # Audio output on port C6 diff --git a/keyboards/handwired/jn68m/rules.mk b/keyboards/handwired/jn68m/rules.mk index 9073c75a7d..3cff26462d 100644 --- a/keyboards/handwired/jn68m/rules.mk +++ b/keyboards/handwired/jn68m/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/handwired/kbod/rules.mk b/keyboards/handwired/kbod/rules.mk index d908501363..b9aab62bd4 100644 --- a/keyboards/handwired/kbod/rules.mk +++ b/keyboards/handwired/kbod/rules.mk @@ -16,6 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/handwired/magicforce61/rules.mk b/keyboards/handwired/magicforce61/rules.mk index c33b8dc18d..48580fde2d 100644 --- a/keyboards/handwired/magicforce61/rules.mk +++ b/keyboards/handwired/magicforce61/rules.mk @@ -16,6 +16,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/handwired/magicforce68/rules.mk b/keyboards/handwired/magicforce68/rules.mk index fef3fb9974..c2487a975b 100644 --- a/keyboards/handwired/magicforce68/rules.mk +++ b/keyboards/handwired/magicforce68/rules.mk @@ -16,6 +16,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/handwired/mechboards_micropad/rules.mk b/keyboards/handwired/mechboards_micropad/rules.mk index e667f76a92..ba811423eb 100644 --- a/keyboards/handwired/mechboards_micropad/rules.mk +++ b/keyboards/handwired/mechboards_micropad/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/handwired/ms_sculpt_mobile/rules.mk b/keyboards/handwired/ms_sculpt_mobile/rules.mk index 1dd8cb2393..4071fb53bf 100644 --- a/keyboards/handwired/ms_sculpt_mobile/rules.mk +++ b/keyboards/handwired/ms_sculpt_mobile/rules.mk @@ -21,7 +21,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/handwired/numpad20/rules.mk b/keyboards/handwired/numpad20/rules.mk index aec3e5814a..444eac251d 100644 --- a/keyboards/handwired/numpad20/rules.mk +++ b/keyboards/handwired/numpad20/rules.mk @@ -16,6 +16,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/handwired/ortho5x13/rules.mk b/keyboards/handwired/ortho5x13/rules.mk index aec3e5814a..444eac251d 100644 --- a/keyboards/handwired/ortho5x13/rules.mk +++ b/keyboards/handwired/ortho5x13/rules.mk @@ -16,6 +16,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/handwired/pilcrow/rules.mk b/keyboards/handwired/pilcrow/rules.mk index aec3e5814a..444eac251d 100644 --- a/keyboards/handwired/pilcrow/rules.mk +++ b/keyboards/handwired/pilcrow/rules.mk @@ -16,6 +16,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/handwired/prime_exl/rules.mk b/keyboards/handwired/prime_exl/rules.mk index 02fe48f8f7..25df7cfe03 100644 --- a/keyboards/handwired/prime_exl/rules.mk +++ b/keyboards/handwired/prime_exl/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/handwired/reddot/rules.mk b/keyboards/handwired/reddot/rules.mk index d908501363..b9aab62bd4 100755 --- a/keyboards/handwired/reddot/rules.mk +++ b/keyboards/handwired/reddot/rules.mk @@ -16,6 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/handwired/symmetry60/rules.mk b/keyboards/handwired/symmetry60/rules.mk index eaac6a3151..8dee0455fd 100644 --- a/keyboards/handwired/symmetry60/rules.mk +++ b/keyboards/handwired/symmetry60/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/handwired/tennie/rules.mk b/keyboards/handwired/tennie/rules.mk index 5ca6261e67..86e7ffdc66 100644 --- a/keyboards/handwired/tennie/rules.mk +++ b/keyboards/handwired/tennie/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/handwired/trackpoint/rules.mk b/keyboards/handwired/trackpoint/rules.mk index ed6515014d..cd3d523c98 100644 --- a/keyboards/handwired/trackpoint/rules.mk +++ b/keyboards/handwired/trackpoint/rules.mk @@ -12,7 +12,7 @@ CONSOLE_ENABLE = yes # Console for debug(+400) COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/hecomi/alpha/rules.mk b/keyboards/hecomi/alpha/rules.mk index d935b46cc6..679ea9fee1 100644 --- a/keyboards/hecomi/alpha/rules.mk +++ b/keyboards/hecomi/alpha/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/hecomi/rules.mk b/keyboards/hecomi/rules.mk index 2b2456e8ad..6b29a58bdb 100644 --- a/keyboards/hecomi/rules.mk +++ b/keyboards/hecomi/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/hineybush/h87a/rules.mk b/keyboards/hineybush/h87a/rules.mk index 042056c798..470de355bf 100644 --- a/keyboards/hineybush/h87a/rules.mk +++ b/keyboards/hineybush/h87a/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/hineybush/h88/rules.mk b/keyboards/hineybush/h88/rules.mk index 20f8676171..121ec8a17f 100644 --- a/keyboards/hineybush/h88/rules.mk +++ b/keyboards/hineybush/h88/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/hineybush/hbcp/rules.mk b/keyboards/hineybush/hbcp/rules.mk index b266b29d46..ee13992dee 100644 --- a/keyboards/hineybush/hbcp/rules.mk +++ b/keyboards/hineybush/hbcp/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/hineybush/hineyg80/rules.mk b/keyboards/hineybush/hineyg80/rules.mk index 6f7c0defbf..b60ea846ca 100644 --- a/keyboards/hineybush/hineyg80/rules.mk +++ b/keyboards/hineybush/hineyg80/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/hs60/v1/rules.mk b/keyboards/hs60/v1/rules.mk index efa0b4f61c..83ee45069d 100644 --- a/keyboards/hs60/v1/rules.mk +++ b/keyboards/hs60/v1/rules.mk @@ -21,7 +21,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 RGB_MATRIX_ENABLE = yes # Use RGB matrix diff --git a/keyboards/idobo/rules.mk b/keyboards/idobo/rules.mk index df9c09d7ae..d7c6082db2 100644 --- a/keyboards/idobo/rules.mk +++ b/keyboards/idobo/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/illuminati/is0/rules.mk b/keyboards/illuminati/is0/rules.mk index de48156a94..922861614a 100644 --- a/keyboards/illuminati/is0/rules.mk +++ b/keyboards/illuminati/is0/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/jc65/v32u4/rules.mk b/keyboards/jc65/v32u4/rules.mk index 135b281db6..712e3bae7f 100644 --- a/keyboards/jc65/v32u4/rules.mk +++ b/keyboards/jc65/v32u4/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/kagamidget/rules.mk b/keyboards/kagamidget/rules.mk index 4746cda7a9..d8f22a60f1 100644 --- a/keyboards/kagamidget/rules.mk +++ b/keyboards/kagamidget/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/kbdfans/kbd19x/rules.mk b/keyboards/kbdfans/kbd19x/rules.mk index 06205956e2..3d11d880b4 100644 --- a/keyboards/kbdfans/kbd19x/rules.mk +++ b/keyboards/kbdfans/kbd19x/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/kbdfans/kbd4x/rules.mk b/keyboards/kbdfans/kbd4x/rules.mk index 56d608bb0a..c8e2651687 100644 --- a/keyboards/kbdfans/kbd4x/rules.mk +++ b/keyboards/kbdfans/kbd4x/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/kbdfans/kbd66/rules.mk b/keyboards/kbdfans/kbd66/rules.mk index 1c08b0074d..e8b3d09dc4 100644 --- a/keyboards/kbdfans/kbd66/rules.mk +++ b/keyboards/kbdfans/kbd66/rules.mk @@ -16,6 +16,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/kbdfans/kbd67/hotswap/rules.mk b/keyboards/kbdfans/kbd67/hotswap/rules.mk index 0340f6d008..fd13accff5 100644 --- a/keyboards/kbdfans/kbd67/hotswap/rules.mk +++ b/keyboards/kbdfans/kbd67/hotswap/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/kbdfans/kbd67/mkii_soldered/rules.mk b/keyboards/kbdfans/kbd67/mkii_soldered/rules.mk index add424a49d..205b307ace 100644 --- a/keyboards/kbdfans/kbd67/mkii_soldered/rules.mk +++ b/keyboards/kbdfans/kbd67/mkii_soldered/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/kbdfans/kbd67/rev1/rules.mk b/keyboards/kbdfans/kbd67/rev1/rules.mk index 32c1ad8f66..2befd98895 100644 --- a/keyboards/kbdfans/kbd67/rev1/rules.mk +++ b/keyboards/kbdfans/kbd67/rev1/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/kbdfans/kbd67/rev2/rules.mk b/keyboards/kbdfans/kbd67/rev2/rules.mk index 251809660b..8692f5f4b9 100644 --- a/keyboards/kbdfans/kbd67/rev2/rules.mk +++ b/keyboards/kbdfans/kbd67/rev2/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/kbdfans/kbd6x/rules.mk b/keyboards/kbdfans/kbd6x/rules.mk index dad3fc450f..34ecec2094 100644 --- a/keyboards/kbdfans/kbd6x/rules.mk +++ b/keyboards/kbdfans/kbd6x/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/kbdfans/kbd8x_mk2/rules.mk b/keyboards/kbdfans/kbd8x_mk2/rules.mk index 8b8695925f..fa1f3e92d3 100644 --- a/keyboards/kbdfans/kbd8x_mk2/rules.mk +++ b/keyboards/kbdfans/kbd8x_mk2/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/kbdfans/kbdpad_mk2/rules.mk b/keyboards/kbdfans/kbdpad_mk2/rules.mk index 2a703c0b12..512f3b464d 100644 --- a/keyboards/kbdfans/kbdpad_mk2/rules.mk +++ b/keyboards/kbdfans/kbdpad_mk2/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/kc60se/rules.mk b/keyboards/kc60se/rules.mk index ded78fd774..c4b8c30626 100644 --- a/keyboards/kc60se/rules.mk +++ b/keyboards/kc60se/rules.mk @@ -15,7 +15,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/keebio/bdn9/rev1/rules.mk b/keyboards/keebio/bdn9/rev1/rules.mk index df82404fe6..a79c8978cc 100644 --- a/keyboards/keebio/bdn9/rev1/rules.mk +++ b/keyboards/keebio/bdn9/rev1/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/keebio/tragicforce68/rules.mk b/keyboards/keebio/tragicforce68/rules.mk index 6c588305ac..4c90ff561c 100644 --- a/keyboards/keebio/tragicforce68/rules.mk +++ b/keyboards/keebio/tragicforce68/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/keyhive/maypad/rules.mk b/keyboards/keyhive/maypad/rules.mk index 85bea9ab14..a58cdfd9d0 100644 --- a/keyboards/keyhive/maypad/rules.mk +++ b/keyboards/keyhive/maypad/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/kinesis/rules.mk b/keyboards/kinesis/rules.mk index 5a6dc4dea3..8cb9252630 100644 --- a/keyboards/kinesis/rules.mk +++ b/keyboards/kinesis/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output should be port E6, current quantum library hardcodes C6, which we use for programming diff --git a/keyboards/kingly_keys/romac_plus/rules.mk b/keyboards/kingly_keys/romac_plus/rules.mk index e15d7bb429..84af235330 100644 --- a/keyboards/kingly_keys/romac_plus/rules.mk +++ b/keyboards/kingly_keys/romac_plus/rules.mk @@ -14,7 +14,7 @@ EXTRAKEY_ENABLE = yes # Audio control and System control SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/kingly_keys/ropro/rules.mk b/keyboards/kingly_keys/ropro/rules.mk index 7e038daffb..f8049f17d0 100644 --- a/keyboards/kingly_keys/ropro/rules.mk +++ b/keyboards/kingly_keys/ropro/rules.mk @@ -14,7 +14,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 ENCODER_ENABLE = yes diff --git a/keyboards/kingly_keys/soap/rules.mk b/keyboards/kingly_keys/soap/rules.mk index 6b8ac5f6a2..508a3d1f85 100644 --- a/keyboards/kingly_keys/soap/rules.mk +++ b/keyboards/kingly_keys/soap/rules.mk @@ -14,7 +14,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 ENCODER_ENABLE = yes diff --git a/keyboards/kira75/rules.mk b/keyboards/kira75/rules.mk index 14cc0e6ba9..b2792a2d5b 100644 --- a/keyboards/kira75/rules.mk +++ b/keyboards/kira75/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/knops/mini/rules.mk b/keyboards/knops/mini/rules.mk index 20be12a00c..4b7a4f724b 100644 --- a/keyboards/knops/mini/rules.mk +++ b/keyboards/knops/mini/rules.mk @@ -16,6 +16,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/kona_classic/rules.mk b/keyboards/kona_classic/rules.mk index a7071a79b3..979a7a5097 100644 --- a/keyboards/kona_classic/rules.mk +++ b/keyboards/kona_classic/rules.mk @@ -16,6 +16,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/kprepublic/bm16a/rules.mk b/keyboards/kprepublic/bm16a/rules.mk index ee04bdb892..020b84e123 100644 --- a/keyboards/kprepublic/bm16a/rules.mk +++ b/keyboards/kprepublic/bm16a/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/kprepublic/jj40/rules.mk b/keyboards/kprepublic/jj40/rules.mk index a35ad9a0a9..07f70976c9 100644 --- a/keyboards/kprepublic/jj40/rules.mk +++ b/keyboards/kprepublic/jj40/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow WS2812_DRIVER = i2c UNICODE_ENABLE = no # Unicode diff --git a/keyboards/kprepublic/jj4x4/rules.mk b/keyboards/kprepublic/jj4x4/rules.mk index 58cb8bb8d1..4eb85022ac 100644 --- a/keyboards/kprepublic/jj4x4/rules.mk +++ b/keyboards/kprepublic/jj4x4/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow WS2812_DRIVER = i2c UNICODE_ENABLE = no # Unicode diff --git a/keyboards/ktec/staryu/rules.mk b/keyboards/ktec/staryu/rules.mk index cec4c0925b..8c8c25d803 100755 --- a/keyboards/ktec/staryu/rules.mk +++ b/keyboards/ktec/staryu/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/kudox/rules.mk b/keyboards/kudox/rules.mk index e468802f31..07ab13e0e7 100644 --- a/keyboards/kudox/rules.mk +++ b/keyboards/kudox/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. diff --git a/keyboards/kudox_game/rules.mk b/keyboards/kudox_game/rules.mk index 30cbcee890..d7171c9106 100644 --- a/keyboards/kudox_game/rules.mk +++ b/keyboards/kudox_game/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/massdrop/alt/rules.mk b/keyboards/massdrop/alt/rules.mk index 552602f2c8..cf8987238c 100644 --- a/keyboards/massdrop/alt/rules.mk +++ b/keyboards/massdrop/alt/rules.mk @@ -17,7 +17,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/massdrop/ctrl/rules.mk b/keyboards/massdrop/ctrl/rules.mk index 9868829d3b..e69fd36174 100644 --- a/keyboards/massdrop/ctrl/rules.mk +++ b/keyboards/massdrop/ctrl/rules.mk @@ -17,7 +17,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/maxipad/rules.mk b/keyboards/maxipad/rules.mk index cc25beaa61..8fb271e62a 100644 --- a/keyboards/maxipad/rules.mk +++ b/keyboards/maxipad/rules.mk @@ -10,7 +10,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/mechkeys/mk60/rules.mk b/keyboards/mechkeys/mk60/rules.mk index 83595897e2..15bb28a6e7 100644 --- a/keyboards/mechkeys/mk60/rules.mk +++ b/keyboards/mechkeys/mk60/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/meishi/rules.mk b/keyboards/meishi/rules.mk index f9f5a173ff..cce5b29222 100644 --- a/keyboards/meishi/rules.mk +++ b/keyboards/meishi/rules.mk @@ -16,6 +16,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/meishi2/rules.mk b/keyboards/meishi2/rules.mk index cea762bc52..041dabc194 100644 --- a/keyboards/meishi2/rules.mk +++ b/keyboards/meishi2/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/meme/rules.mk b/keyboards/meme/rules.mk index 41346c1161..cf34e594dc 100644 --- a/keyboards/meme/rules.mk +++ b/keyboards/meme/rules.mk @@ -16,6 +16,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/meson/rules.mk b/keyboards/meson/rules.mk index 132fccce6b..cd82c5e954 100644 --- a/keyboards/meson/rules.mk +++ b/keyboards/meson/rules.mk @@ -17,7 +17,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/miniaxe/rules.mk b/keyboards/miniaxe/rules.mk index 2e1668267e..bd38aa3376 100644 --- a/keyboards/miniaxe/rules.mk +++ b/keyboards/miniaxe/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/mint60/rules.mk b/keyboards/mint60/rules.mk index 1000c7fc40..4feb5e4312 100644 --- a/keyboards/mint60/rules.mk +++ b/keyboards/mint60/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/miuni32/rules.mk b/keyboards/miuni32/rules.mk index 028cb57755..ccffa363e6 100644 --- a/keyboards/miuni32/rules.mk +++ b/keyboards/miuni32/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 RGBLIGHT_ENABLE = yes diff --git a/keyboards/moon/rules.mk b/keyboards/moon/rules.mk index 496cf7742b..599ce880a8 100644 --- a/keyboards/moon/rules.mk +++ b/keyboards/moon/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/namecard2x4/rules.mk b/keyboards/namecard2x4/rules.mk index 1d8eee2a56..a0092c5c17 100644 --- a/keyboards/namecard2x4/rules.mk +++ b/keyboards/namecard2x4/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/nek_type_a/rules.mk b/keyboards/nek_type_a/rules.mk index 0f13c245fc..c32e25af05 100644 --- a/keyboards/nek_type_a/rules.mk +++ b/keyboards/nek_type_a/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID diff --git a/keyboards/noxary/220/rules.mk b/keyboards/noxary/220/rules.mk index a472de48e8..ba3aeaa11d 100644 --- a/keyboards/noxary/220/rules.mk +++ b/keyboards/noxary/220/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/noxary/260/rules.mk b/keyboards/noxary/260/rules.mk index 924324e378..46f35764ba 100644 --- a/keyboards/noxary/260/rules.mk +++ b/keyboards/noxary/260/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/noxary/268_2/rules.mk b/keyboards/noxary/268_2/rules.mk index ec518c0bd2..05b7ef648a 100644 --- a/keyboards/noxary/268_2/rules.mk +++ b/keyboards/noxary/268_2/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/noxary/280/rules.mk b/keyboards/noxary/280/rules.mk index eb97ea3f57..38733d4f50 100644 --- a/keyboards/noxary/280/rules.mk +++ b/keyboards/noxary/280/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/otaku_split/rev0/rules.mk b/keyboards/otaku_split/rev0/rules.mk index 72166f743d..3a8e495475 100644 --- a/keyboards/otaku_split/rev0/rules.mk +++ b/keyboards/otaku_split/rev0/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/otaku_split/rev1/rules.mk b/keyboards/otaku_split/rev1/rules.mk index 72166f743d..3a8e495475 100644 --- a/keyboards/otaku_split/rev1/rules.mk +++ b/keyboards/otaku_split/rev1/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/pdxkbc/rules.mk b/keyboards/pdxkbc/rules.mk index 6f7c0defbf..b60ea846ca 100644 --- a/keyboards/pdxkbc/rules.mk +++ b/keyboards/pdxkbc/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/pico/rules.mk b/keyboards/pico/rules.mk index 00be1ede09..9cfa9d4572 100644 --- a/keyboards/pico/rules.mk +++ b/keyboards/pico/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. diff --git a/keyboards/primekb/prime_o/rules.mk b/keyboards/primekb/prime_o/rules.mk index affe6d8ba9..25109701d9 100644 --- a/keyboards/primekb/prime_o/rules.mk +++ b/keyboards/primekb/prime_o/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/quantrik/kyuu/rules.mk b/keyboards/quantrik/kyuu/rules.mk index ae061ce8e8..39160e9865 100644 --- a/keyboards/quantrik/kyuu/rules.mk +++ b/keyboards/quantrik/kyuu/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/redox/rules.mk b/keyboards/redox/rules.mk index aabfb4e5bf..672e60d820 100644 --- a/keyboards/redox/rules.mk +++ b/keyboards/redox/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. diff --git a/keyboards/redscarf_iiplus/verb/rules.mk b/keyboards/redscarf_iiplus/verb/rules.mk index d88ef50faa..5047c3a98c 100755 --- a/keyboards/redscarf_iiplus/verb/rules.mk +++ b/keyboards/redscarf_iiplus/verb/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/redscarf_iiplus/verc/rules.mk b/keyboards/redscarf_iiplus/verc/rules.mk index a9aab81b5a..4e4abd5d4d 100755 --- a/keyboards/redscarf_iiplus/verc/rules.mk +++ b/keyboards/redscarf_iiplus/verc/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/redscarf_iiplus/verd/rules.mk b/keyboards/redscarf_iiplus/verd/rules.mk index d31941caf3..e191c26504 100644 --- a/keyboards/redscarf_iiplus/verd/rules.mk +++ b/keyboards/redscarf_iiplus/verd/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/reviung34/rules.mk b/keyboards/reviung34/rules.mk index e5579d1531..2fbc01cd9e 100755 --- a/keyboards/reviung34/rules.mk +++ b/keyboards/reviung34/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/reviung39/rules.mk b/keyboards/reviung39/rules.mk index e5579d1531..2fbc01cd9e 100644 --- a/keyboards/reviung39/rules.mk +++ b/keyboards/reviung39/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/rgbkb/zygomorph/rules.mk b/keyboards/rgbkb/zygomorph/rules.mk index f1a1e52709..d8f4c1309f 100644 --- a/keyboards/rgbkb/zygomorph/rules.mk +++ b/keyboards/rgbkb/zygomorph/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/runner3680/rules.mk b/keyboards/runner3680/rules.mk index e8ea24666c..b8de0a4d22 100644 --- a/keyboards/runner3680/rules.mk +++ b/keyboards/runner3680/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/sck/osa/rules.mk b/keyboards/sck/osa/rules.mk index 1975a38f1c..a3e8f27978 100644 --- a/keyboards/sck/osa/rules.mk +++ b/keyboards/sck/osa/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/scythe/rules.mk b/keyboards/scythe/rules.mk index 0ea7e85154..b951bdf09e 100644 --- a/keyboards/scythe/rules.mk +++ b/keyboards/scythe/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/sentraq/number_pad/rules.mk b/keyboards/sentraq/number_pad/rules.mk index b55c0a8998..bf79fc89ca 100644 --- a/keyboards/sentraq/number_pad/rules.mk +++ b/keyboards/sentraq/number_pad/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/shiro/rules.mk b/keyboards/shiro/rules.mk index cea762bc52..041dabc194 100644 --- a/keyboards/shiro/rules.mk +++ b/keyboards/shiro/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/silverbullet44/rules.mk b/keyboards/silverbullet44/rules.mk index 4a974b4920..a7a4dd9c12 100644 --- a/keyboards/silverbullet44/rules.mk +++ b/keyboards/silverbullet44/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow RGB_MATRIX_ENABLE = no RGB_MATRIX_DRIVER = WS2812 diff --git a/keyboards/smk60/rules.mk b/keyboards/smk60/rules.mk index bad46c27c5..f49e78694d 100644 --- a/keyboards/smk60/rules.mk +++ b/keyboards/smk60/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 RGBLIGHT_ENABLE = yes # Use RGB bottom light diff --git a/keyboards/snampad/rules.mk b/keyboards/snampad/rules.mk index 9cb1ca048c..9ac9aed540 100644 --- a/keyboards/snampad/rules.mk +++ b/keyboards/snampad/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/spacetime/rules.mk b/keyboards/spacetime/rules.mk index 49ad27b3a4..f6c1ad73e3 100644 --- a/keyboards/spacetime/rules.mk +++ b/keyboards/spacetime/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/splitish/rules.mk b/keyboards/splitish/rules.mk index c7af000183..237122cda5 100644 --- a/keyboards/splitish/rules.mk +++ b/keyboards/splitish/rules.mk @@ -13,4 +13,4 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality diff --git a/keyboards/splitkb/kyria/rules.mk b/keyboards/splitkb/kyria/rules.mk index e32f9c59a3..97b2778d67 100644 --- a/keyboards/splitkb/kyria/rules.mk +++ b/keyboards/splitkb/kyria/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 SPLIT_KEYBOARD = yes # Split common diff --git a/keyboards/standaside/rules.mk b/keyboards/standaside/rules.mk index 707fa7ab97..78d4733aad 100644 --- a/keyboards/standaside/rules.mk +++ b/keyboards/standaside/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 RGBLIGHT_ENABLE = yes # Enable RGB underlighting support diff --git a/keyboards/suihankey/rules.mk b/keyboards/suihankey/rules.mk index 36750121dc..2132c83143 100644 --- a/keyboards/suihankey/rules.mk +++ b/keyboards/suihankey/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/switchplate/southpaw_65/rules.mk b/keyboards/switchplate/southpaw_65/rules.mk index 9cda57e9d0..62f8305512 100644 --- a/keyboards/switchplate/southpaw_65/rules.mk +++ b/keyboards/switchplate/southpaw_65/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/tender/macrowo_pad/rules.mk b/keyboards/tender/macrowo_pad/rules.mk index a2b0108a1e..d6545babd0 100644 --- a/keyboards/tender/macrowo_pad/rules.mk +++ b/keyboards/tender/macrowo_pad/rules.mk @@ -14,7 +14,7 @@ EXTRAKEY_ENABLE = yes # Audio control and System control SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/the_ruler/rules.mk b/keyboards/the_ruler/rules.mk index 4c840136d2..d690d238ec 100644 --- a/keyboards/the_ruler/rules.mk +++ b/keyboards/the_ruler/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. diff --git a/keyboards/thevankeyboards/caravan/rules.mk b/keyboards/thevankeyboards/caravan/rules.mk index 1b7971deec..e000125ee3 100644 --- a/keyboards/thevankeyboards/caravan/rules.mk +++ b/keyboards/thevankeyboards/caravan/rules.mk @@ -13,6 +13,6 @@ EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/thevankeyboards/minivan/rules.mk b/keyboards/thevankeyboards/minivan/rules.mk index ae68d7b964..acd6a0d06c 100644 --- a/keyboards/thevankeyboards/minivan/rules.mk +++ b/keyboards/thevankeyboards/minivan/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 RGBLIGHT_ENABLE = yes # Enable support for RGB LEDs diff --git a/keyboards/thevankeyboards/roadkit/rules.mk b/keyboards/thevankeyboards/roadkit/rules.mk index d42be1e804..d175eaef8f 100644 --- a/keyboards/thevankeyboards/roadkit/rules.mk +++ b/keyboards/thevankeyboards/roadkit/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/tkc/tkc1800/rules.mk b/keyboards/tkc/tkc1800/rules.mk index ee58b4f156..224c52c3f0 100644 --- a/keyboards/tkc/tkc1800/rules.mk +++ b/keyboards/tkc/tkc1800/rules.mk @@ -17,7 +17,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/tmo50/rules.mk b/keyboards/tmo50/rules.mk index ed45543521..7bc7e54be3 100644 --- a/keyboards/tmo50/rules.mk +++ b/keyboards/tmo50/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/treasure/type9/rules.mk b/keyboards/treasure/type9/rules.mk index 039f12f9d0..46c9b3f56b 100644 --- a/keyboards/treasure/type9/rules.mk +++ b/keyboards/treasure/type9/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/ut472/rules.mk b/keyboards/ut472/rules.mk index 5fbbcbe536..61de88c5a5 100644 --- a/keyboards/ut472/rules.mk +++ b/keyboards/ut472/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 RGBLIGHT_ENABLE = yes diff --git a/keyboards/v60_type_r/rules.mk b/keyboards/v60_type_r/rules.mk index 2d2e1d27b2..9397ebd3dc 100644 --- a/keyboards/v60_type_r/rules.mk +++ b/keyboards/v60_type_r/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable the RGB Underglow RGBLIGHT_CUSTOM_DRIVER = yes UNICODE_ENABLE = no # Unicode diff --git a/keyboards/westfoxtrot/cyclops/rules.mk b/keyboards/westfoxtrot/cyclops/rules.mk index 0875f0f1a2..286ceaf409 100644 --- a/keyboards/westfoxtrot/cyclops/rules.mk +++ b/keyboards/westfoxtrot/cyclops/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/westfoxtrot/cypher/rev1/rules.mk b/keyboards/westfoxtrot/cypher/rev1/rules.mk index 17bd5976f3..557abfb148 100644 --- a/keyboards/westfoxtrot/cypher/rev1/rules.mk +++ b/keyboards/westfoxtrot/cypher/rev1/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/westfoxtrot/cypher/rev5/rules.mk b/keyboards/westfoxtrot/cypher/rev5/rules.mk index 286ac290e1..0204567be6 100644 --- a/keyboards/westfoxtrot/cypher/rev5/rules.mk +++ b/keyboards/westfoxtrot/cypher/rev5/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/wilba_tech/rama_works_m10_b/rules.mk b/keyboards/wilba_tech/rama_works_m10_b/rules.mk index edeacb70c9..3e1ec4ab25 100644 --- a/keyboards/wilba_tech/rama_works_m10_b/rules.mk +++ b/keyboards/wilba_tech/rama_works_m10_b/rules.mk @@ -16,6 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/wilba_tech/rama_works_u80_a/rules.mk b/keyboards/wilba_tech/rama_works_u80_a/rules.mk index 5d195d1aae..d6946696bb 100644 --- a/keyboards/wilba_tech/rama_works_u80_a/rules.mk +++ b/keyboards/wilba_tech/rama_works_u80_a/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 CIE1931_CURVE = yes diff --git a/keyboards/wilba_tech/wt60_a/rules.mk b/keyboards/wilba_tech/wt60_a/rules.mk index 60ea4ea9d2..35f8f7a7b7 100644 --- a/keyboards/wilba_tech/wt60_a/rules.mk +++ b/keyboards/wilba_tech/wt60_a/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/wilba_tech/wt60_d/rules.mk b/keyboards/wilba_tech/wt60_d/rules.mk index edeacb70c9..3e1ec4ab25 100644 --- a/keyboards/wilba_tech/wt60_d/rules.mk +++ b/keyboards/wilba_tech/wt60_d/rules.mk @@ -16,6 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/wilba_tech/wt65_a/rules.mk b/keyboards/wilba_tech/wt65_a/rules.mk index 60ea4ea9d2..35f8f7a7b7 100644 --- a/keyboards/wilba_tech/wt65_a/rules.mk +++ b/keyboards/wilba_tech/wt65_a/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/wilba_tech/wt65_b/rules.mk b/keyboards/wilba_tech/wt65_b/rules.mk index 60ea4ea9d2..35f8f7a7b7 100644 --- a/keyboards/wilba_tech/wt65_b/rules.mk +++ b/keyboards/wilba_tech/wt65_b/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/wilba_tech/wt69_a/rules.mk b/keyboards/wilba_tech/wt69_a/rules.mk index d39f22b26d..5c9f6e4354 100644 --- a/keyboards/wilba_tech/wt69_a/rules.mk +++ b/keyboards/wilba_tech/wt69_a/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/wilba_tech/wt75_a/rules.mk b/keyboards/wilba_tech/wt75_a/rules.mk index 60ea4ea9d2..35f8f7a7b7 100644 --- a/keyboards/wilba_tech/wt75_a/rules.mk +++ b/keyboards/wilba_tech/wt75_a/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/wilba_tech/wt75_b/rules.mk b/keyboards/wilba_tech/wt75_b/rules.mk index 60ea4ea9d2..35f8f7a7b7 100644 --- a/keyboards/wilba_tech/wt75_b/rules.mk +++ b/keyboards/wilba_tech/wt75_b/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/wilba_tech/wt75_c/rules.mk b/keyboards/wilba_tech/wt75_c/rules.mk index 60ea4ea9d2..35f8f7a7b7 100644 --- a/keyboards/wilba_tech/wt75_c/rules.mk +++ b/keyboards/wilba_tech/wt75_c/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/wilba_tech/wt80_a/rules.mk b/keyboards/wilba_tech/wt80_a/rules.mk index 60ea4ea9d2..35f8f7a7b7 100644 --- a/keyboards/wilba_tech/wt80_a/rules.mk +++ b/keyboards/wilba_tech/wt80_a/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/wilba_tech/wt80_bc/rules.mk b/keyboards/wilba_tech/wt80_bc/rules.mk index adc3dc6958..cd43ae18ed 100644 --- a/keyboards/wilba_tech/wt80_bc/rules.mk +++ b/keyboards/wilba_tech/wt80_bc/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/wilba_tech/wt8_a/rules.mk b/keyboards/wilba_tech/wt8_a/rules.mk index d39f22b26d..5c9f6e4354 100644 --- a/keyboards/wilba_tech/wt8_a/rules.mk +++ b/keyboards/wilba_tech/wt8_a/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/wsk/gothic50/rules.mk b/keyboards/wsk/gothic50/rules.mk index 4cc018d967..c10b077b32 100644 --- a/keyboards/wsk/gothic50/rules.mk +++ b/keyboards/wsk/gothic50/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/wsk/gothic70/rules.mk b/keyboards/wsk/gothic70/rules.mk index 4cc018d967..c10b077b32 100644 --- a/keyboards/wsk/gothic70/rules.mk +++ b/keyboards/wsk/gothic70/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/xelus/dawn60/rev1/rules.mk b/keyboards/xelus/dawn60/rev1/rules.mk index 06bd743c0a..b9e3316473 100644 --- a/keyboards/xelus/dawn60/rev1/rules.mk +++ b/keyboards/xelus/dawn60/rev1/rules.mk @@ -21,7 +21,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. - We have custom RGB underglow diff --git a/keyboards/xelus/dawn60/rev1_qmk/rules.mk b/keyboards/xelus/dawn60/rev1_qmk/rules.mk index 3da5fe11d2..c70f8f2c4b 100644 --- a/keyboards/xelus/dawn60/rev1_qmk/rules.mk +++ b/keyboards/xelus/dawn60/rev1_qmk/rules.mk @@ -21,7 +21,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/xelus/pachi/rgb/rules.mk b/keyboards/xelus/pachi/rgb/rules.mk index 806fa2da7f..67c6cc7c48 100644 --- a/keyboards/xelus/pachi/rgb/rules.mk +++ b/keyboards/xelus/pachi/rgb/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/xelus/snap96/rules.mk b/keyboards/xelus/snap96/rules.mk index 50801546e3..ba128a005c 100644 --- a/keyboards/xelus/snap96/rules.mk +++ b/keyboards/xelus/snap96/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. - We have custom RGB underglow diff --git a/keyboards/xiudi/xd002/rules.mk b/keyboards/xiudi/xd002/rules.mk index fa09f9961f..a68c2211fe 100644 --- a/keyboards/xiudi/xd002/rules.mk +++ b/keyboards/xiudi/xd002/rules.mk @@ -18,7 +18,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/xiudi/xd84/rules.mk b/keyboards/xiudi/xd84/rules.mk index 9547fe35f5..fb1d559630 100644 --- a/keyboards/xiudi/xd84/rules.mk +++ b/keyboards/xiudi/xd84/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/xiudi/xd87/rules.mk b/keyboards/xiudi/xd87/rules.mk index 4aae8ba25e..c21ef6fbbb 100644 --- a/keyboards/xiudi/xd87/rules.mk +++ b/keyboards/xiudi/xd87/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 diff --git a/keyboards/yd68/rules.mk b/keyboards/yd68/rules.mk index eab30cfcea..04e3c2c644 100644 --- a/keyboards/yd68/rules.mk +++ b/keyboards/yd68/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output on port C6 From 20ea5f3fb5ba108153148e57981a7e804fd4be61 Mon Sep 17 00:00:00 2001 From: Ryan Date: Tue, 21 Sep 2021 19:58:46 +1000 Subject: [PATCH 052/595] Relocate Adafruit BLE code (#14530) --- common_features.mk | 5 +++-- .../protocol/lufa => drivers/bluetooth}/adafruit_ble.cpp | 0 {tmk_core/protocol/lufa => drivers/bluetooth}/adafruit_ble.h | 0 {tmk_core/protocol/lufa => drivers/bluetooth}/outputselect.c | 0 {tmk_core/protocol/lufa => drivers/bluetooth}/outputselect.h | 0 {tmk_core/protocol/lufa => drivers/bluetooth}/ringbuffer.hpp | 0 6 files changed, 3 insertions(+), 2 deletions(-) rename {tmk_core/protocol/lufa => drivers/bluetooth}/adafruit_ble.cpp (100%) rename {tmk_core/protocol/lufa => drivers/bluetooth}/adafruit_ble.h (100%) rename {tmk_core/protocol/lufa => drivers/bluetooth}/outputselect.c (100%) rename {tmk_core/protocol/lufa => drivers/bluetooth}/outputselect.h (100%) rename {tmk_core/protocol/lufa => drivers/bluetooth}/ringbuffer.hpp (100%) diff --git a/common_features.mk b/common_features.mk index 4633ccce1f..8b5ee071d7 100644 --- a/common_features.mk +++ b/common_features.mk @@ -767,19 +767,20 @@ ifeq ($(strip $(USBPD_ENABLE)), yes) endif BLUETOOTH_ENABLE ?= no -VALID_BLUETOOTH_DRIVER_TYPES = AdafruitBLE RN42 custom +VALID_BLUETOOTH_DRIVER_TYPES := AdafruitBLE RN42 custom ifeq ($(strip $(BLUETOOTH_ENABLE)), yes) ifeq ($(filter $(strip $(BLUETOOTH_DRIVER)),$(VALID_BLUETOOTH_DRIVER_TYPES)),) $(error "$(BLUETOOTH_DRIVER)" is not a valid Bluetooth driver type) endif OPT_DEFS += -DBLUETOOTH_ENABLE NO_USB_STARTUP_CHECK := yes + COMMON_VPATH += $(DRIVER_PATH)/bluetooth SRC += outputselect.c ifeq ($(strip $(BLUETOOTH_DRIVER)), AdafruitBLE) OPT_DEFS += -DMODULE_ADAFRUIT_BLE SRC += analog.c - SRC += $(LUFA_DIR)/adafruit_ble.cpp + SRC += $(DRIVER_PATH)/bluetooth/adafruit_ble.cpp QUANTUM_LIB_SRC += spi_master.c endif diff --git a/tmk_core/protocol/lufa/adafruit_ble.cpp b/drivers/bluetooth/adafruit_ble.cpp similarity index 100% rename from tmk_core/protocol/lufa/adafruit_ble.cpp rename to drivers/bluetooth/adafruit_ble.cpp diff --git a/tmk_core/protocol/lufa/adafruit_ble.h b/drivers/bluetooth/adafruit_ble.h similarity index 100% rename from tmk_core/protocol/lufa/adafruit_ble.h rename to drivers/bluetooth/adafruit_ble.h diff --git a/tmk_core/protocol/lufa/outputselect.c b/drivers/bluetooth/outputselect.c similarity index 100% rename from tmk_core/protocol/lufa/outputselect.c rename to drivers/bluetooth/outputselect.c diff --git a/tmk_core/protocol/lufa/outputselect.h b/drivers/bluetooth/outputselect.h similarity index 100% rename from tmk_core/protocol/lufa/outputselect.h rename to drivers/bluetooth/outputselect.h diff --git a/tmk_core/protocol/lufa/ringbuffer.hpp b/drivers/bluetooth/ringbuffer.hpp similarity index 100% rename from tmk_core/protocol/lufa/ringbuffer.hpp rename to drivers/bluetooth/ringbuffer.hpp From 6b74e48f81fd22f4b982c686df9c8d1f8efae571 Mon Sep 17 00:00:00 2001 From: Ryan Date: Tue, 21 Sep 2021 20:04:03 +1000 Subject: [PATCH 053/595] Remove audio pin references in rules.mk (#14532) --- keyboards/1upkeyboards/1up60hse/rules.mk | 2 +- keyboards/1upkeyboards/super16/rules.mk | 2 +- keyboards/40percentclub/25/rules.mk | 2 +- keyboards/40percentclub/4pack/rules.mk | 2 +- keyboards/40percentclub/4x4/rules.mk | 2 +- keyboards/40percentclub/5x5/rules.mk | 2 +- keyboards/40percentclub/6lit/rules.mk | 2 +- keyboards/40percentclub/foobar/rules.mk | 2 +- keyboards/40percentclub/half_n_half/rules.mk | 2 +- keyboards/40percentclub/i75/rules.mk | 2 +- keyboards/40percentclub/mf68/rules.mk | 2 +- keyboards/40percentclub/nano/rules.mk | 2 +- keyboards/40percentclub/nein/rules.mk | 2 +- keyboards/40percentclub/nori/rules.mk | 2 +- keyboards/40percentclub/ut47/rules.mk | 2 +- keyboards/4pplet/aekiso60/rev_a/rules.mk | 2 +- keyboards/4pplet/steezy60/rev_a/rules.mk | 2 +- keyboards/4pplet/waffling60/rev_a/rules.mk | 2 +- keyboards/6ball/rules.mk | 2 +- keyboards/7skb/rules.mk | 2 +- keyboards/9key/rules.mk | 2 +- keyboards/abacus/rules.mk | 2 +- keyboards/absinthe/rules.mk | 2 +- keyboards/abstract/ellipse/rev1/rules.mk | 2 +- keyboards/acheron/arctic/rules.mk | 2 +- keyboards/acheron/austin/rules.mk | 2 +- keyboards/acheron/elongate/rules.mk | 2 +- keyboards/acheron/keebspcb/rules.mk | 2 +- keyboards/acheron/shark/rules.mk | 2 +- keyboards/adkb96/rules.mk | 2 +- keyboards/aeboards/aegis/rules.mk | 2 +- keyboards/aeboards/ext65/rev1/rules.mk | 2 +- keyboards/ai03/equinox/rev0/rules.mk | 2 +- keyboards/ai03/equinox/rev1/rules.mk | 2 +- keyboards/ai03/lunar/rules.mk | 2 +- keyboards/ai03/orbit/rules.mk | 2 +- keyboards/ai03/orbit_x/rules.mk | 2 +- keyboards/ai03/polaris/rules.mk | 2 +- keyboards/ai03/quasar/rules.mk | 2 +- keyboards/ai03/soyuz/rules.mk | 2 +- keyboards/akb/eb46/rules.mk | 2 +- keyboards/akb/raine/rules.mk | 2 +- keyboards/alf/dc60/rules.mk | 2 +- keyboards/alf/x11/rules.mk | 2 +- keyboards/allison/rules.mk | 2 +- keyboards/allison_numpad/rules.mk | 2 +- keyboards/amj96/rules.mk | 2 +- keyboards/amjkeyboard/amj66/rules.mk | 2 +- keyboards/anavi/macropad8/rules.mk | 2 +- keyboards/angel17/alpha/rules.mk | 2 +- keyboards/angel17/rev1/rules.mk | 2 +- keyboards/angel17/rules.mk | 2 +- keyboards/angel64/rules.mk | 2 +- keyboards/aos/tkl/rules.mk | 2 +- keyboards/aplyard/aplx6/rev1/rules.mk | 2 +- keyboards/arabica37/rev1/rules.mk | 2 +- keyboards/ash1800/rules.mk | 2 +- keyboards/ashpil/modelm_usbc/rules.mk | 2 +- keyboards/atreus/rules.mk | 2 +- keyboards/atxkb/1894/rules.mk | 2 +- keyboards/baguette/rules.mk | 2 +- keyboards/bakeneko80/rules.mk | 2 +- keyboards/bat43/rules.mk | 2 +- keyboards/bear_face/rules.mk | 2 +- keyboards/beatervan/rules.mk | 2 +- keyboards/blockey/rules.mk | 2 +- keyboards/boardsource/4x12/rules.mk | 2 +- keyboards/boardsource/5x12/rules.mk | 2 +- keyboards/boardwalk/rules.mk | 2 +- keyboards/botanicalkeyboards/fm2u/rules.mk | 2 +- keyboards/bpiphany/frosty_flake/keymaps/default/rules.mk | 2 +- keyboards/bpiphany/frosty_flake/keymaps/tkl/rules.mk | 2 +- keyboards/bpiphany/frosty_flake/rules.mk | 2 +- keyboards/bpiphany/kitten_paw/rules.mk | 2 +- keyboards/bpiphany/pegasushoof/keymaps/default/rules.mk | 2 +- keyboards/bpiphany/pegasushoof/keymaps/default_jis/rules.mk | 2 +- keyboards/bpiphany/pegasushoof/rules.mk | 2 +- keyboards/bpiphany/sixshooter/rules.mk | 2 +- keyboards/bpiphany/tiger_lily/keymaps/default/rules.mk | 2 +- keyboards/bpiphany/tiger_lily/keymaps/default_ansi/rules.mk | 2 +- keyboards/bpiphany/tiger_lily/rules.mk | 2 +- keyboards/bpiphany/unloved_bastard/rules.mk | 2 +- keyboards/bthlabs/geekpad/rules.mk | 2 +- keyboards/business_card/alpha/rules.mk | 2 +- keyboards/business_card/beta/rules.mk | 2 +- keyboards/business_card/rules.mk | 2 +- keyboards/c39/rules.mk | 2 +- keyboards/cannonkeys/obliterated75/rules.mk | 2 +- keyboards/chidori/rules.mk | 2 +- keyboards/christmas_tree/V2017/rules.mk | 2 +- keyboards/christmas_tree/rules.mk | 2 +- keyboards/ckeys/nakey/rules.mk | 2 +- keyboards/ckeys/obelus/rules.mk | 2 +- keyboards/ckeys/washington/rules.mk | 2 +- keyboards/claw44/rev1/rules.mk | 2 +- keyboards/claw44/rules.mk | 2 +- keyboards/clawsome/bookerboard/rules.mk | 2 +- keyboards/clawsome/coupe/rules.mk | 2 +- keyboards/clawsome/gamebuddy/v1_0/rules.mk | 2 +- keyboards/clawsome/sedan/rules.mk | 2 +- keyboards/clawsome/sidekick/rules.mk | 2 +- keyboards/clueboard/card/keymaps/rgb_effects/rules.mk | 2 +- keyboards/cocoa40/rules.mk | 2 +- keyboards/contra/rules.mk | 2 +- keyboards/converter/hp_46010a/rules.mk | 2 +- keyboards/converter/ibm_terminal/keymaps/default/rules.mk | 2 +- keyboards/converter/ibm_terminal/rules.mk | 2 +- keyboards/converter/modelm101/rules.mk | 2 +- keyboards/converter/numeric_keypad_IIe/rules.mk | 2 +- keyboards/converter/palm_usb/rules.mk | 2 +- keyboards/converter/sun_usb/rules.mk | 2 +- keyboards/converter/usb_usb/ble/rules.mk | 2 +- keyboards/copenhagen_click/click_pad_v1/rules.mk | 2 +- keyboards/coseyfannitutti/discipad/rules.mk | 2 +- keyboards/coseyfannitutti/discipline/rules.mk | 2 +- keyboards/coseyfannitutti/mullet/rules.mk | 2 +- keyboards/coseyfannitutti/mulletpad/rules.mk | 2 +- keyboards/coseyfannitutti/mysterium/rules.mk | 2 +- keyboards/coseyfannitutti/romeo/rules.mk | 2 +- keyboards/cu24/rules.mk | 2 +- keyboards/cu75/keymaps/default/rules.mk | 2 +- keyboards/cu75/keymaps/iso/rules.mk | 2 +- keyboards/cu80/rules.mk | 2 +- keyboards/cutie_club/wraith/rules.mk | 2 +- keyboards/dc01/arrow/rules.mk | 2 +- keyboards/dc01/left/rules.mk | 2 +- keyboards/dc01/numpad/rules.mk | 2 +- keyboards/dc01/right/rules.mk | 2 +- keyboards/deltasplit75/rules.mk | 2 +- keyboards/diverge3/rules.mk | 2 +- keyboards/divergetm2/rules.mk | 2 +- keyboards/dm9records/ergoinu/keymaps/default/rules.mk | 2 +- keyboards/dm9records/ergoinu/keymaps/default_jis/rules.mk | 2 +- keyboards/dm9records/ergoinu/rules.mk | 2 +- keyboards/dm9records/plaid/rules.mk | 2 +- keyboards/dm9records/tartan/rules.mk | 2 +- keyboards/dmqdesign/spin/rules.mk | 2 +- keyboards/do60/rules.mk | 2 +- keyboards/doppelganger/rules.mk | 2 +- keyboards/doro67/multi/rules.mk | 2 +- keyboards/doro67/regular/rules.mk | 2 +- keyboards/doro67/rgb/rules.mk | 2 +- keyboards/dozen0/rules.mk | 2 +- keyboards/dp60/rules.mk | 2 +- keyboards/duck/jetfire/rules.mk | 2 +- keyboards/duck/lightsaver/rules.mk | 2 +- keyboards/duck/octagon/v1/rules.mk | 2 +- keyboards/duck/octagon/v2/rules.mk | 2 +- keyboards/duck/orion/v3/rules.mk | 2 +- keyboards/duck/tcv3/rules.mk | 2 +- keyboards/dztech/dz60rgb/v1/rules.mk | 2 +- keyboards/dztech/dz60rgb/v2/rules.mk | 2 +- keyboards/dztech/dz60rgb_ansi/v1/rules.mk | 2 +- keyboards/dztech/dz60rgb_ansi/v2/rules.mk | 2 +- keyboards/dztech/dz60rgb_wkl/v1/rules.mk | 2 +- keyboards/dztech/dz60rgb_wkl/v2/rules.mk | 2 +- keyboards/dztech/dz65rgb/v1/rules.mk | 2 +- keyboards/dztech/dz65rgb/v2/rules.mk | 2 +- keyboards/eco/keymaps/default/rules.mk | 2 +- keyboards/emptystring/NQG/rules.mk | 2 +- keyboards/eniigmakeyboards/ek87/rules.mk | 2 +- keyboards/ep/40/rules.mk | 2 +- keyboards/ep/96/rules.mk | 2 +- keyboards/ep/comsn/hs68/rules.mk | 2 +- keyboards/ep/comsn/mollydooker/rules.mk | 2 +- keyboards/ep/comsn/tf_longeboye/rules.mk | 2 +- keyboards/ergo42/rules.mk | 2 +- keyboards/ergodash/rules.mk | 2 +- keyboards/ergosaurus/rules.mk | 2 +- keyboards/ergoslab/rules.mk | 2 +- keyboards/ergotravel/rules.mk | 2 +- keyboards/ericrlau/numdiscipline/rev1/rules.mk | 2 +- keyboards/evil80/rules.mk | 2 +- keyboards/evyd13/eon40/rules.mk | 2 +- keyboards/evyd13/eon65/rules.mk | 2 +- keyboards/evyd13/eon75/rules.mk | 2 +- keyboards/evyd13/eon87/rules.mk | 2 +- keyboards/evyd13/eon95/rules.mk | 2 +- keyboards/evyd13/minitomic/rules.mk | 2 +- keyboards/evyd13/mx5160/rules.mk | 2 +- keyboards/evyd13/nt660/rules.mk | 2 +- keyboards/evyd13/omrontkl/rules.mk | 2 +- keyboards/evyd13/ta65/rules.mk | 2 +- keyboards/evyd13/wasdat/rules.mk | 2 +- keyboards/evyd13/wasdat_code/rules.mk | 2 +- keyboards/exclusive/e6_rgb/rules.mk | 2 +- keyboards/exclusive/e6v2/le/rules.mk | 2 +- keyboards/exclusive/e6v2/le_bmc/rules.mk | 2 +- keyboards/exclusive/e6v2/oe/rules.mk | 2 +- keyboards/exclusive/e6v2/oe_bmc/rules.mk | 2 +- keyboards/exclusive/e7v1se/rules.mk | 2 +- keyboards/felix/rules.mk | 2 +- keyboards/flehrad/downbubble/rules.mk | 2 +- keyboards/fleuron/rules.mk | 2 +- keyboards/fluorite/rules.mk | 2 +- keyboards/flx/lodestone/rules.mk | 2 +- keyboards/flx/virgo/rules.mk | 2 +- keyboards/fortitude60/rules.mk | 2 +- keyboards/foxlab/leaf60/hotswap/rules.mk | 2 +- keyboards/foxlab/leaf60/universal/rules.mk | 2 +- keyboards/fractal/rules.mk | 2 +- keyboards/funky40/rules.mk | 2 +- keyboards/gami_studio/lex60/rules.mk | 2 +- keyboards/geekboards/tester/rules.mk | 2 +- keyboards/getta25/rules.mk | 2 +- keyboards/gh60/satan/keymaps/default/rules.mk | 2 +- keyboards/gingham/rules.mk | 2 +- keyboards/gon/nerdtkl/rules.mk | 2 +- keyboards/gray_studio/cod67/rules.mk | 2 +- keyboards/gray_studio/space65/rules.mk | 2 +- keyboards/gray_studio/think65/hotswap/rules.mk | 2 +- keyboards/gray_studio/think65/solder/rules.mk | 2 +- keyboards/grid600/press/rules.mk | 2 +- keyboards/hadron/ver2/rules.mk | 2 +- keyboards/halberd/rules.mk | 2 +- keyboards/handwired/108key_trackpoint/rules.mk | 2 +- keyboards/handwired/412_64/rules.mk | 2 +- keyboards/handwired/42/rules.mk | 2 +- keyboards/handwired/aplx2/rules.mk | 2 +- keyboards/handwired/aranck/rules.mk | 2 +- keyboards/handwired/arrow_pad/rules.mk | 2 +- keyboards/handwired/atreus50/rules.mk | 2 +- keyboards/handwired/bdn9_ble/rules.mk | 2 +- keyboards/handwired/brain/rules.mk | 2 +- keyboards/handwired/cans12er/rules.mk | 2 +- keyboards/handwired/cmd60/rules.mk | 2 +- keyboards/handwired/co60/rev1/rules.mk | 2 +- keyboards/handwired/colorlice/rules.mk | 2 +- keyboards/handwired/dactyl_left/rules.mk | 2 +- keyboards/handwired/dactyl_promicro/rules.mk | 2 +- keyboards/handwired/daishi/rules.mk | 2 +- keyboards/handwired/datahand/rules.mk | 2 +- keyboards/handwired/ddg_56/rules.mk | 2 +- keyboards/handwired/fc200rt_qmk/rules.mk | 2 +- keyboards/handwired/fivethirteen/rules.mk | 2 +- keyboards/handwired/floorboard/rules.mk | 2 +- keyboards/handwired/frenchdev/rules.mk | 2 +- keyboards/handwired/fruity60/rules.mk | 2 +- keyboards/handwired/gamenum/rules.mk | 2 +- keyboards/handwired/hacked_motospeed/rules.mk | 2 +- keyboards/handwired/heisenberg/rules.mk | 2 +- keyboards/handwired/hnah40/rules.mk | 2 +- keyboards/handwired/hnah40rgb/rules.mk | 2 +- keyboards/handwired/ibm122m/rules.mk | 2 +- keyboards/handwired/jn68m/rules.mk | 2 +- keyboards/handwired/jot50/rules.mk | 2 +- keyboards/handwired/jotanck/rules.mk | 2 +- keyboards/handwired/jotpad16/rules.mk | 2 +- keyboards/handwired/jtallbean/split_65/rules.mk | 2 +- keyboards/handwired/juliet/rules.mk | 2 +- keyboards/handwired/kbod/keymaps/default/rules.mk | 2 +- keyboards/handwired/kbod/rules.mk | 2 +- keyboards/handwired/lovelive9/rules.mk | 2 +- keyboards/handwired/magicforce61/rules.mk | 2 +- keyboards/handwired/magicforce68/rules.mk | 2 +- keyboards/handwired/mechboards_micropad/rules.mk | 2 +- keyboards/handwired/minorca/rules.mk | 2 +- keyboards/handwired/ms_sculpt_mobile/keymaps/default/rules.mk | 2 +- keyboards/handwired/ms_sculpt_mobile/rules.mk | 2 +- keyboards/handwired/myskeeb/rules.mk | 2 +- keyboards/handwired/not_so_minidox/rules.mk | 2 +- keyboards/handwired/novem/rules.mk | 2 +- keyboards/handwired/numpad20/rules.mk | 2 +- keyboards/handwired/obuwunkunubi/spaget/rules.mk | 2 +- keyboards/handwired/ortho5x13/rules.mk | 2 +- keyboards/handwired/owlet60/rules.mk | 2 +- keyboards/handwired/p65rgb/rules.mk | 2 +- keyboards/handwired/pilcrow/keymaps/default/rules.mk | 2 +- keyboards/handwired/pilcrow/rules.mk | 2 +- keyboards/handwired/postageboard/mini/rules.mk | 2 +- keyboards/handwired/postageboard/r1/rules.mk | 2 +- keyboards/handwired/prime_exl/rules.mk | 2 +- keyboards/handwired/prime_exl_plus/rules.mk | 2 +- keyboards/handwired/promethium/keymaps/default/rules.mk | 2 +- keyboards/handwired/promethium/rules.mk | 2 +- keyboards/handwired/qc60/rules.mk | 2 +- keyboards/handwired/reddot/rules.mk | 2 +- keyboards/handwired/sick68/rules.mk | 2 +- keyboards/handwired/slash/rules.mk | 2 +- keyboards/handwired/splittest/rules.mk | 2 +- keyboards/handwired/sticc14/rules.mk | 2 +- keyboards/handwired/symmetry60/rules.mk | 2 +- keyboards/handwired/tennie/rules.mk | 2 +- keyboards/handwired/terminus_mini/keymaps/default/rules.mk | 2 +- keyboards/handwired/terminus_mini/rules.mk | 2 +- keyboards/handwired/trackpoint/rules.mk | 2 +- keyboards/handwired/twadlee/tp69/rules.mk | 2 +- keyboards/handwired/videowriter/rules.mk | 2 +- keyboards/handwired/xealous/rules.mk | 2 +- keyboards/hecomi/alpha/rules.mk | 2 +- keyboards/hecomi/rules.mk | 2 +- keyboards/heliar/wm1_hotswap/rules.mk | 2 +- keyboards/helix/pico/keymaps/default/rules.mk | 2 +- keyboards/helix/pico/qmk_conf/rules.mk | 2 +- keyboards/helix/rules.mk | 2 +- keyboards/hid_liber/rules.mk | 2 +- keyboards/hifumi/rules.mk | 2 +- keyboards/hineybush/h75_singa/rules.mk | 2 +- keyboards/hineybush/h87a/rules.mk | 2 +- keyboards/hineybush/h88/rules.mk | 2 +- keyboards/hineybush/hbcp/rules.mk | 2 +- keyboards/hineybush/hineyg80/rules.mk | 2 +- keyboards/hineybush/physix/rules.mk | 2 +- keyboards/hineybush/sm68/rules.mk | 2 +- keyboards/hs60/v1/rules.mk | 2 +- keyboards/hs60/v2/ansi/rules.mk | 2 +- keyboards/hs60/v2/hhkb/rules.mk | 2 +- keyboards/hs60/v2/iso/rules.mk | 2 +- keyboards/id80/rules.mk | 2 +- keyboards/idobo/rules.mk | 2 +- keyboards/illuminati/is0/rules.mk | 2 +- keyboards/ivy/rules.mk | 2 +- keyboards/jae/j01/rules.mk | 2 +- keyboards/jc65/v32u4/rules.mk | 2 +- keyboards/jisplit89/rules.mk | 2 +- keyboards/jnao/rules.mk | 2 +- keyboards/just60/rules.mk | 2 +- keyboards/kagamidget/rules.mk | 2 +- keyboards/kbdclack/kaishi65/rules.mk | 2 +- keyboards/kbdfans/kbd19x/rules.mk | 2 +- keyboards/kbdfans/kbd4x/rules.mk | 2 +- keyboards/kbdfans/kbd66/rules.mk | 2 +- keyboards/kbdfans/kbd67/hotswap/rules.mk | 2 +- keyboards/kbdfans/kbd67/mkii_soldered/rules.mk | 2 +- keyboards/kbdfans/kbd67/mkiirgb/v2/rules.mk | 2 +- keyboards/kbdfans/kbd67/rev1/rules.mk | 2 +- keyboards/kbdfans/kbd67/rev2/rules.mk | 2 +- keyboards/kbdfans/kbd6x/rules.mk | 2 +- keyboards/kbdfans/kbd8x_mk2/rules.mk | 2 +- keyboards/kbdfans/kbdpad_mk2/rules.mk | 2 +- keyboards/kbdfans/maja/rules.mk | 2 +- keyboards/kc60se/rules.mk | 2 +- keyboards/keebio/bdn9/rev1/rules.mk | 2 +- keyboards/keebio/bdn9/rev2/rules.mk | 2 +- keyboards/keebio/bfo9000/rules.mk | 2 +- keyboards/keebio/choconum/rules.mk | 2 +- keyboards/keebio/ergodicity/rules.mk | 2 +- keyboards/keebio/fourier/rules.mk | 2 +- keyboards/keebio/iris/rev1/rules.mk | 2 +- keyboards/keebio/iris/rev1_led/rules.mk | 2 +- keyboards/keebio/iris/rev2/rules.mk | 2 +- keyboards/keebio/iris/rev3/rules.mk | 2 +- keyboards/keebio/iris/rev4/rules.mk | 2 +- keyboards/keebio/kbo5000/rules.mk | 2 +- keyboards/keebio/laplace/rules.mk | 2 +- keyboards/keebio/levinson/rules.mk | 2 +- keyboards/keebio/nyquist/rev1/rules.mk | 2 +- keyboards/keebio/nyquist/rev2/rules.mk | 2 +- keyboards/keebio/nyquist/rev3/rules.mk | 2 +- keyboards/keebio/quefrency/rules.mk | 2 +- keyboards/keebio/rorschach/rules.mk | 2 +- keyboards/keebio/sinc/rules.mk | 2 +- keyboards/keebio/tragicforce68/rules.mk | 2 +- keyboards/keebio/tukey/rules.mk | 2 +- keyboards/keebio/viterbi/rules.mk | 2 +- keyboards/keebio/wavelet/rules.mk | 2 +- keyboards/keebwerk/nano_slider/rules.mk | 2 +- keyboards/keyhive/maypad/rules.mk | 2 +- keyboards/kinesis/keymaps/default/rules.mk | 2 +- keyboards/kinesis/keymaps/default_pretty/rules.mk | 2 +- keyboards/kinesis/rules.mk | 2 +- keyboards/kingly_keys/romac_plus/rules.mk | 2 +- keyboards/kingly_keys/ropro/rules.mk | 2 +- keyboards/kingly_keys/soap/rules.mk | 2 +- keyboards/kira75/rules.mk | 2 +- keyboards/kmac/rules.mk | 2 +- keyboards/kmini/rules.mk | 2 +- keyboards/knops/mini/rules.mk | 2 +- keyboards/kona_classic/keymaps/ansi/rules.mk | 2 +- keyboards/kona_classic/keymaps/ansi_arrows/rules.mk | 2 +- keyboards/kona_classic/keymaps/ansi_arrows_lcap/rules.mk | 2 +- keyboards/kona_classic/keymaps/ansi_split/rules.mk | 2 +- keyboards/kona_classic/keymaps/ansi_split_arrows/rules.mk | 2 +- keyboards/kona_classic/keymaps/default/rules.mk | 2 +- keyboards/kona_classic/keymaps/iso/rules.mk | 2 +- keyboards/kona_classic/keymaps/iso_arrows/rules.mk | 2 +- keyboards/kona_classic/keymaps/iso_split/rules.mk | 2 +- keyboards/kona_classic/keymaps/iso_split_arrows/rules.mk | 2 +- keyboards/kona_classic/rules.mk | 2 +- keyboards/kprepublic/bm16a/rules.mk | 2 +- keyboards/kprepublic/bm43a/rules.mk | 2 +- keyboards/kprepublic/bm60rgb/rules.mk | 2 +- keyboards/kprepublic/cospad/rules.mk | 2 +- keyboards/kprepublic/jj40/rules.mk | 2 +- keyboards/kprepublic/jj4x4/rules.mk | 2 +- keyboards/ktec/daisy/rules.mk | 2 +- keyboards/ktec/staryu/rules.mk | 2 +- keyboards/kudox/rules.mk | 2 +- keyboards/kudox_game/rules.mk | 2 +- keyboards/kv/revt/rules.mk | 2 +- keyboards/lattice60/rules.mk | 2 +- keyboards/launchpad/rules.mk | 2 +- keyboards/lazydesigners/the30/rules.mk | 2 +- keyboards/lets_split/rules.mk | 2 +- keyboards/lets_split_eh/rules.mk | 2 +- keyboards/lfkeyboards/lfk78/rules.mk | 2 +- keyboards/lfkeyboards/lfk87/keymaps/default/rules.mk | 2 +- keyboards/lfkeyboards/lfk87/keymaps/iso/rules.mk | 2 +- keyboards/lfkeyboards/lfk87/rules.mk | 2 +- keyboards/lfkeyboards/lfkpad/rules.mk | 2 +- keyboards/lfkeyboards/mini1800/keymaps/default/rules.mk | 2 +- keyboards/lily58/keymaps/default/rules.mk | 2 +- keyboards/lily58/rules.mk | 2 +- keyboards/massdrop/alt/rules.mk | 2 +- keyboards/massdrop/ctrl/rules.mk | 2 +- keyboards/maxipad/rules.mk | 2 +- keyboards/maxr1998/phoebe/rules.mk | 2 +- keyboards/maxr1998/pulse4k/rules.mk | 2 +- keyboards/mc_76k/rules.mk | 2 +- keyboards/mechkeys/mk60/rules.mk | 2 +- keyboards/mechlovin/adelais/rules.mk | 2 +- keyboards/mechlovin/hannah60rgb/rules.mk | 2 +- keyboards/mechlovin/hannah910/rev1/rules.mk | 2 +- keyboards/mechlovin/infinityce/rules.mk | 2 +- keyboards/mechlovin/pisces/rules.mk | 2 +- keyboards/meira/rules.mk | 2 +- keyboards/meishi/rules.mk | 2 +- keyboards/meishi2/rules.mk | 2 +- keyboards/meme/rules.mk | 2 +- keyboards/meson/rules.mk | 2 +- keyboards/miller/gm862/rules.mk | 2 +- keyboards/miniaxe/rules.mk | 2 +- keyboards/minidox/rules.mk | 2 +- keyboards/mint60/rules.mk | 2 +- keyboards/miuni32/rules.mk | 2 +- keyboards/montsinger/rebound/rev1/rules.mk | 2 +- keyboards/montsinger/rebound/rev2/rules.mk | 2 +- keyboards/montsinger/rebound/rev3/rules.mk | 2 +- keyboards/montsinger/rebound/rev4/rules.mk | 2 +- keyboards/montsinger/rewind/rules.mk | 2 +- keyboards/moon/rules.mk | 2 +- keyboards/mountainblocks/mb17/rules.mk | 2 +- keyboards/mt40/rules.mk | 2 +- keyboards/murcielago/rev1/rules.mk | 2 +- keyboards/nafuda/rules.mk | 2 +- keyboards/naked48/rules.mk | 2 +- keyboards/naked64/rules.mk | 2 +- keyboards/namecard2x4/rules.mk | 2 +- keyboards/navi10/rev0/rules.mk | 2 +- keyboards/navi10/rev2/rules.mk | 2 +- keyboards/ncc1701kb/rules.mk | 2 +- keyboards/nebula12/rules.mk | 2 +- keyboards/nebula68/rules.mk | 2 +- keyboards/nek_type_a/rules.mk | 2 +- keyboards/newgame40/rules.mk | 2 +- keyboards/nightmare/rules.mk | 2 +- keyboards/niu_mini/rules.mk | 2 +- keyboards/nk65/rules.mk | 2 +- keyboards/noxary/220/rules.mk | 2 +- keyboards/noxary/260/rules.mk | 2 +- keyboards/noxary/268/rules.mk | 2 +- keyboards/noxary/268_2/rules.mk | 2 +- keyboards/noxary/280/rules.mk | 2 +- keyboards/noxary/x268/rules.mk | 2 +- keyboards/nullbitsco/nibble/rules.mk | 2 +- keyboards/oddball/rules.mk | 2 +- keyboards/ogre/ergo_single/rules.mk | 2 +- keyboards/ogre/ergo_split/rules.mk | 2 +- keyboards/org60/rules.mk | 2 +- keyboards/ortho5by12/rules.mk | 2 +- keyboards/orthodox/rules.mk | 2 +- keyboards/otaku_split/rev0/rules.mk | 2 +- keyboards/otaku_split/rev1/rules.mk | 2 +- keyboards/pabile/p18/rules.mk | 2 +- keyboards/pabile/p40/rules.mk | 2 +- keyboards/palette1202/rules.mk | 2 +- keyboards/panc40/rules.mk | 2 +- keyboards/pdxkbc/rules.mk | 2 +- keyboards/percent/booster/rules.mk | 2 +- keyboards/pico/rules.mk | 2 +- keyboards/planck/light/rules.mk | 2 +- keyboards/planck/rev1/rules.mk | 2 +- keyboards/planck/rev2/rules.mk | 2 +- keyboards/planck/rev3/rules.mk | 2 +- keyboards/planck/rev4/rules.mk | 2 +- keyboards/planck/rev5/rules.mk | 2 +- keyboards/primekb/prime_l/rules.mk | 2 +- keyboards/primekb/prime_m/rules.mk | 2 +- keyboards/primekb/prime_o/rules.mk | 2 +- keyboards/projectkb/alice/rev1/rules.mk | 2 +- keyboards/projectkb/alice/rev2/rules.mk | 2 +- keyboards/puck/rules.mk | 2 +- keyboards/quad_h/lb75/rules.mk | 2 +- keyboards/quantrik/kyuu/rules.mk | 2 +- keyboards/qwertyydox/rules.mk | 2 +- keyboards/rabbit/rabbit68/rules.mk | 2 +- keyboards/redox/rules.mk | 2 +- keyboards/redscarf_i/rules.mk | 2 +- keyboards/redscarf_iiplus/verb/rules.mk | 2 +- keyboards/redscarf_iiplus/verc/rules.mk | 2 +- keyboards/redscarf_iiplus/verd/rules.mk | 2 +- keyboards/retro_75/rules.mk | 2 +- keyboards/reversestudio/decadepad/rules.mk | 2 +- keyboards/reviung34/rules.mk | 2 +- keyboards/reviung39/rules.mk | 2 +- keyboards/reviung41/rules.mk | 2 +- keyboards/rgbkb/zen/rules.mk | 2 +- keyboards/rgbkb/zygomorph/rules.mk | 2 +- keyboards/runner3680/rules.mk | 2 +- keyboards/sck/m0116b/rules.mk | 2 +- keyboards/sck/osa/rules.mk | 2 +- keyboards/scythe/rules.mk | 2 +- keyboards/sentraq/number_pad/rules.mk | 2 +- keyboards/sentraq/s60_x/default/rules.mk | 2 +- keyboards/sentraq/s60_x/rgb/rules.mk | 2 +- keyboards/sentraq/s65_plus/rules.mk | 2 +- keyboards/sentraq/s65_x/rules.mk | 2 +- keyboards/setta21/rules.mk | 2 +- keyboards/shambles/rules.mk | 2 +- keyboards/shiro/rules.mk | 2 +- keyboards/sidderskb/majbritt/rev1/rules.mk | 2 +- keyboards/silverbullet44/rules.mk | 2 +- keyboards/smk60/rules.mk | 2 +- keyboards/snampad/rules.mk | 2 +- keyboards/spacetime/rules.mk | 2 +- keyboards/splitkb/kyria/rules.mk | 2 +- keyboards/splitreus62/rules.mk | 2 +- keyboards/standaside/rules.mk | 2 +- keyboards/subatomic/rules.mk | 2 +- keyboards/suihankey/rules.mk | 2 +- keyboards/switchplate/southpaw_65/rules.mk | 2 +- keyboards/switchplate/southpaw_fullsize/rules.mk | 2 +- keyboards/tada68/rules.mk | 2 +- keyboards/tender/macrowo_pad/rules.mk | 2 +- keyboards/tg4x/rules.mk | 2 +- keyboards/the_royal/liminal/rules.mk | 2 +- keyboards/the_royal/schwann/rules.mk | 2 +- keyboards/the_ruler/rules.mk | 2 +- keyboards/thedogkeyboard/rules.mk | 2 +- keyboards/themadnoodle/ncc1701kb/v2/rules.mk | 2 +- keyboards/themadnoodle/noodlepad/rules.mk | 2 +- keyboards/thevankeyboards/caravan/rules.mk | 2 +- keyboards/thevankeyboards/minivan/rules.mk | 2 +- keyboards/thevankeyboards/roadkit/rules.mk | 2 +- keyboards/tkc/tkc1800/rules.mk | 2 +- keyboards/tmo50/rules.mk | 2 +- keyboards/tokyokeyboard/tokyo60/rules.mk | 2 +- keyboards/touchpad/rules.mk | 2 +- keyboards/tr60w/rules.mk | 2 +- keyboards/treadstone32/rules.mk | 2 +- keyboards/treadstone48/rules.mk | 2 +- keyboards/treasure/type9/rules.mk | 2 +- keyboards/ua62/rules.mk | 2 +- keyboards/uranuma/rules.mk | 2 +- keyboards/ut472/rules.mk | 2 +- keyboards/uzu42/rules.mk | 2 +- keyboards/v60_type_r/rules.mk | 2 +- keyboards/vitamins_included/rules.mk | 2 +- keyboards/waldo/rules.mk | 2 +- keyboards/wallaby/rules.mk | 2 +- keyboards/westfoxtrot/cyclops/rules.mk | 2 +- keyboards/westfoxtrot/cypher/rev1/rules.mk | 2 +- keyboards/westfoxtrot/cypher/rev5/rules.mk | 2 +- keyboards/wheatfield/blocked65/rules.mk | 2 +- keyboards/wilba_tech/rama_works_koyu/rules.mk | 2 +- keyboards/wilba_tech/rama_works_m10_b/rules.mk | 2 +- keyboards/wilba_tech/rama_works_m60_a/rules.mk | 2 +- keyboards/wilba_tech/rama_works_m6_a/rules.mk | 2 +- keyboards/wilba_tech/rama_works_m6_b/rules.mk | 2 +- keyboards/wilba_tech/rama_works_u80_a/rules.mk | 2 +- keyboards/wilba_tech/wt60_a/rules.mk | 2 +- keyboards/wilba_tech/wt60_b/rules.mk | 2 +- keyboards/wilba_tech/wt60_bx/rules.mk | 2 +- keyboards/wilba_tech/wt60_c/rules.mk | 2 +- keyboards/wilba_tech/wt60_d/rules.mk | 2 +- keyboards/wilba_tech/wt60_xt/rules.mk | 2 +- keyboards/wilba_tech/wt65_a/rules.mk | 2 +- keyboards/wilba_tech/wt65_b/rules.mk | 2 +- keyboards/wilba_tech/wt69_a/rules.mk | 2 +- keyboards/wilba_tech/wt75_a/rules.mk | 2 +- keyboards/wilba_tech/wt75_b/rules.mk | 2 +- keyboards/wilba_tech/wt75_c/rules.mk | 2 +- keyboards/wilba_tech/wt80_a/rules.mk | 2 +- keyboards/wilba_tech/wt80_bc/rules.mk | 2 +- keyboards/wilba_tech/wt8_a/rules.mk | 2 +- keyboards/wilba_tech/zeal60/rules.mk | 2 +- keyboards/wilba_tech/zeal65/rules.mk | 2 +- keyboards/wolfmarkclub/wm1/rules.mk | 2 +- keyboards/wsk/gothic50/rules.mk | 2 +- keyboards/wsk/gothic70/rules.mk | 2 +- keyboards/wsk/jerkin/rules.mk | 2 +- keyboards/wsk/tkl30/rules.mk | 2 +- keyboards/xelus/dawn60/rev1/rules.mk | 2 +- keyboards/xelus/dawn60/rev1_qmk/rules.mk | 2 +- keyboards/xelus/pachi/rgb/rules.mk | 2 +- keyboards/xelus/snap96/rules.mk | 2 +- keyboards/xiudi/xd002/rules.mk | 2 +- keyboards/xiudi/xd004/v1/rules.mk | 2 +- keyboards/xiudi/xd60/rev2/rules.mk | 2 +- keyboards/xiudi/xd60/rev3/rules.mk | 2 +- keyboards/xiudi/xd68/rules.mk | 2 +- keyboards/xiudi/xd84/rules.mk | 2 +- keyboards/xiudi/xd87/rules.mk | 2 +- keyboards/xiudi/xd96/rules.mk | 2 +- keyboards/xw60/rules.mk | 2 +- keyboards/yatara/drink_me/rules.mk | 2 +- keyboards/yd60mq/rules.mk | 2 +- keyboards/yd68/rules.mk | 2 +- keyboards/ymdk/ymd09/rules.mk | 2 +- keyboards/yncognito/batpad/rules.mk | 2 +- keyboards/yosino58/rules.mk | 2 +- keyboards/yurei/rules.mk | 2 +- keyboards/yushakobo/quick7/rules.mk | 2 +- keyboards/zfrontier/big_switch/rules.mk | 2 +- keyboards/zinc/keymaps/default/rules.mk | 2 +- keyboards/zinc/rules.mk | 2 +- 606 files changed, 606 insertions(+), 606 deletions(-) diff --git a/keyboards/1upkeyboards/1up60hse/rules.mk b/keyboards/1upkeyboards/1up60hse/rules.mk index ccc0b640aa..911f0fc0f3 100644 --- a/keyboards/1upkeyboards/1up60hse/rules.mk +++ b/keyboards/1upkeyboards/1up60hse/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output EXTRAFLAGS += -flto LAYOUTS = 60_ansi diff --git a/keyboards/1upkeyboards/super16/rules.mk b/keyboards/1upkeyboards/super16/rules.mk index 2567b24e3e..fb048787c9 100644 --- a/keyboards/1upkeyboards/super16/rules.mk +++ b/keyboards/1upkeyboards/super16/rules.mk @@ -21,6 +21,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGB_MATRIX_ENABLE = yes RGB_MATRIX_DRIVER = WS2812 UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_4x4 numpad_4x4 diff --git a/keyboards/40percentclub/25/rules.mk b/keyboards/40percentclub/25/rules.mk index 3d6e67d625..0bcdd908d2 100644 --- a/keyboards/40percentclub/25/rules.mk +++ b/keyboards/40percentclub/25/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output # Enable generic behavior for split boards SPLIT_KEYBOARD = yes diff --git a/keyboards/40percentclub/4pack/rules.mk b/keyboards/40percentclub/4pack/rules.mk index fc30a2b86e..a74abd94fd 100644 --- a/keyboards/40percentclub/4pack/rules.mk +++ b/keyboards/40percentclub/4pack/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/40percentclub/4x4/rules.mk b/keyboards/40percentclub/4x4/rules.mk index 863979e88e..ad18e92bd6 100644 --- a/keyboards/40percentclub/4x4/rules.mk +++ b/keyboards/40percentclub/4x4/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_4x4 ortho_4x12 diff --git a/keyboards/40percentclub/5x5/rules.mk b/keyboards/40percentclub/5x5/rules.mk index b3fdd812de..d0bdb0adc7 100644 --- a/keyboards/40percentclub/5x5/rules.mk +++ b/keyboards/40percentclub/5x5/rules.mk @@ -18,6 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_5x15 diff --git a/keyboards/40percentclub/6lit/rules.mk b/keyboards/40percentclub/6lit/rules.mk index 265e24a623..2f69d38b99 100644 --- a/keyboards/40percentclub/6lit/rules.mk +++ b/keyboards/40percentclub/6lit/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output # Enable generic behavior for split boards SPLIT_KEYBOARD = yes diff --git a/keyboards/40percentclub/foobar/rules.mk b/keyboards/40percentclub/foobar/rules.mk index 0fa420606f..b01a789349 100644 --- a/keyboards/40percentclub/foobar/rules.mk +++ b/keyboards/40percentclub/foobar/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output # Enable generic behavior for split boards SPLIT_KEYBOARD = yes diff --git a/keyboards/40percentclub/half_n_half/rules.mk b/keyboards/40percentclub/half_n_half/rules.mk index b6f115026c..d5f0691417 100644 --- a/keyboards/40percentclub/half_n_half/rules.mk +++ b/keyboards/40percentclub/half_n_half/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output # Enable generic behavior for split boards SPLIT_KEYBOARD = yes diff --git a/keyboards/40percentclub/i75/rules.mk b/keyboards/40percentclub/i75/rules.mk index 5d301d6144..28bebd5f4d 100644 --- a/keyboards/40percentclub/i75/rules.mk +++ b/keyboards/40percentclub/i75/rules.mk @@ -13,7 +13,7 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_5x15 DEFAULT_FOLDER = 40percentclub/i75/promicro diff --git a/keyboards/40percentclub/mf68/rules.mk b/keyboards/40percentclub/mf68/rules.mk index 7fd24401c5..041e53e9cd 100644 --- a/keyboards/40percentclub/mf68/rules.mk +++ b/keyboards/40percentclub/mf68/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = 68_ansi diff --git a/keyboards/40percentclub/nano/rules.mk b/keyboards/40percentclub/nano/rules.mk index e51555c318..b605df4153 100644 --- a/keyboards/40percentclub/nano/rules.mk +++ b/keyboards/40percentclub/nano/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = yes # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. diff --git a/keyboards/40percentclub/nein/rules.mk b/keyboards/40percentclub/nein/rules.mk index c142e2896f..5c63da2c4b 100644 --- a/keyboards/40percentclub/nein/rules.mk +++ b/keyboards/40percentclub/nein/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/40percentclub/nori/rules.mk b/keyboards/40percentclub/nori/rules.mk index baa50f5d0c..f1ba12b029 100644 --- a/keyboards/40percentclub/nori/rules.mk +++ b/keyboards/40percentclub/nori/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_4x4 ortho_4x12 diff --git a/keyboards/40percentclub/ut47/rules.mk b/keyboards/40percentclub/ut47/rules.mk index ce388d1834..360dc3f28c 100644 --- a/keyboards/40percentclub/ut47/rules.mk +++ b/keyboards/40percentclub/ut47/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output # custom matrix setup CUSTOM_MATRIX = yes diff --git a/keyboards/4pplet/aekiso60/rev_a/rules.mk b/keyboards/4pplet/aekiso60/rev_a/rules.mk index 8a382bf874..c335e60118 100644 --- a/keyboards/4pplet/aekiso60/rev_a/rules.mk +++ b/keyboards/4pplet/aekiso60/rev_a/rules.mk @@ -18,5 +18,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode diff --git a/keyboards/4pplet/steezy60/rev_a/rules.mk b/keyboards/4pplet/steezy60/rev_a/rules.mk index 8a382bf874..c335e60118 100644 --- a/keyboards/4pplet/steezy60/rev_a/rules.mk +++ b/keyboards/4pplet/steezy60/rev_a/rules.mk @@ -18,5 +18,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode diff --git a/keyboards/4pplet/waffling60/rev_a/rules.mk b/keyboards/4pplet/waffling60/rev_a/rules.mk index 8a382bf874..c335e60118 100644 --- a/keyboards/4pplet/waffling60/rev_a/rules.mk +++ b/keyboards/4pplet/waffling60/rev_a/rules.mk @@ -18,5 +18,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode diff --git a/keyboards/6ball/rules.mk b/keyboards/6ball/rules.mk index f4f8dd2f8a..77c84c403f 100644 --- a/keyboards/6ball/rules.mk +++ b/keyboards/6ball/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = yes # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. diff --git a/keyboards/7skb/rules.mk b/keyboards/7skb/rules.mk index 212cd11fa2..e9215ce9ba 100644 --- a/keyboards/7skb/rules.mk +++ b/keyboards/7skb/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/9key/rules.mk b/keyboards/9key/rules.mk index 8939801626..b71f32348c 100644 --- a/keyboards/9key/rules.mk +++ b/keyboards/9key/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = yes # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. TAP_DANCE_ENABLE = no diff --git a/keyboards/abacus/rules.mk b/keyboards/abacus/rules.mk index d7ecb474f7..91873f39e4 100644 --- a/keyboards/abacus/rules.mk +++ b/keyboards/abacus/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes DIP_SWITCH_ENABLE = yes LTO_ENABLE = yes diff --git a/keyboards/absinthe/rules.mk b/keyboards/absinthe/rules.mk index d00a43123c..b94b6338f0 100644 --- a/keyboards/absinthe/rules.mk +++ b/keyboards/absinthe/rules.mk @@ -18,6 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes RGBLIGHT_ENABLE = yes diff --git a/keyboards/abstract/ellipse/rev1/rules.mk b/keyboards/abstract/ellipse/rev1/rules.mk index ebd0715c24..f011386846 100644 --- a/keyboards/abstract/ellipse/rev1/rules.mk +++ b/keyboards/abstract/ellipse/rev1/rules.mk @@ -19,5 +19,5 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes # Enable support for rotary encoders diff --git a/keyboards/acheron/arctic/rules.mk b/keyboards/acheron/arctic/rules.mk index bb690d742f..17aa543022 100644 --- a/keyboards/acheron/arctic/rules.mk +++ b/keyboards/acheron/arctic/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output # Enter lower-power sleep mode when on the ChibiOS idle thread OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/acheron/austin/rules.mk b/keyboards/acheron/austin/rules.mk index fac5f15182..d89d8cae81 100644 --- a/keyboards/acheron/austin/rules.mk +++ b/keyboards/acheron/austin/rules.mk @@ -18,6 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output # Enter lower-power sleep mode when on the ChibiOS idle thread OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/acheron/elongate/rules.mk b/keyboards/acheron/elongate/rules.mk index 52b69d9f7d..ca8c652540 100644 --- a/keyboards/acheron/elongate/rules.mk +++ b/keyboards/acheron/elongate/rules.mk @@ -18,5 +18,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LTO_ENABLE = yes diff --git a/keyboards/acheron/keebspcb/rules.mk b/keyboards/acheron/keebspcb/rules.mk index 50d687f01c..562436e64a 100644 --- a/keyboards/acheron/keebspcb/rules.mk +++ b/keyboards/acheron/keebspcb/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output # Enter lower-power sleep mode when on the ChibiOS idle thread OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/acheron/shark/rules.mk b/keyboards/acheron/shark/rules.mk index 50e41b1c70..624d0cd2ef 100644 --- a/keyboards/acheron/shark/rules.mk +++ b/keyboards/acheron/shark/rules.mk @@ -20,7 +20,7 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_4x12 diff --git a/keyboards/adkb96/rules.mk b/keyboards/adkb96/rules.mk index 61622d178d..cf3a1bbd11 100644 --- a/keyboards/adkb96/rules.mk +++ b/keyboards/adkb96/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/aeboards/aegis/rules.mk b/keyboards/aeboards/aegis/rules.mk index 3e1ec4ab25..df4c1b12c1 100644 --- a/keyboards/aeboards/aegis/rules.mk +++ b/keyboards/aeboards/aegis/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/aeboards/ext65/rev1/rules.mk b/keyboards/aeboards/ext65/rev1/rules.mk index 3e1ec4ab25..df4c1b12c1 100644 --- a/keyboards/aeboards/ext65/rev1/rules.mk +++ b/keyboards/aeboards/ext65/rev1/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/ai03/equinox/rev0/rules.mk b/keyboards/ai03/equinox/rev0/rules.mk index 922861614a..8eee2ba5df 100644 --- a/keyboards/ai03/equinox/rev0/rules.mk +++ b/keyboards/ai03/equinox/rev0/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/ai03/equinox/rev1/rules.mk b/keyboards/ai03/equinox/rev1/rules.mk index 922861614a..8eee2ba5df 100644 --- a/keyboards/ai03/equinox/rev1/rules.mk +++ b/keyboards/ai03/equinox/rev1/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/ai03/lunar/rules.mk b/keyboards/ai03/lunar/rules.mk index c11b7ba3c9..e7517515fb 100644 --- a/keyboards/ai03/lunar/rules.mk +++ b/keyboards/ai03/lunar/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/ai03/orbit/rules.mk b/keyboards/ai03/orbit/rules.mk index 9f368cc645..73565fc75b 100644 --- a/keyboards/ai03/orbit/rules.mk +++ b/keyboards/ai03/orbit/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output USE_I2C = no # I2C for split communication CUSTOM_MATRIX = yes # For providing custom matrix.c (in this case, override regular matrix.c with split matrix.c) # SPLIT_KEYBOARD = yes # Split keyboard flag disabled as manual edits had to be done to the split common files diff --git a/keyboards/ai03/orbit_x/rules.mk b/keyboards/ai03/orbit_x/rules.mk index a6684b44d8..9a9a9acf5a 100644 --- a/keyboards/ai03/orbit_x/rules.mk +++ b/keyboards/ai03/orbit_x/rules.mk @@ -18,5 +18,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD = yes # Split keyboard diff --git a/keyboards/ai03/polaris/rules.mk b/keyboards/ai03/polaris/rules.mk index a23ad3da93..2824b33cc2 100644 --- a/keyboards/ai03/polaris/rules.mk +++ b/keyboards/ai03/polaris/rules.mk @@ -18,6 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_tsangan_hhkb diff --git a/keyboards/ai03/quasar/rules.mk b/keyboards/ai03/quasar/rules.mk index 09b19339ba..c32087907e 100644 --- a/keyboards/ai03/quasar/rules.mk +++ b/keyboards/ai03/quasar/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/ai03/soyuz/rules.mk b/keyboards/ai03/soyuz/rules.mk index c9ccbe4e5d..0946b8f528 100644 --- a/keyboards/ai03/soyuz/rules.mk +++ b/keyboards/ai03/soyuz/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_5x4 numpad_5x4 diff --git a/keyboards/akb/eb46/rules.mk b/keyboards/akb/eb46/rules.mk index 335f06bb0a..d1aca1f406 100644 --- a/keyboards/akb/eb46/rules.mk +++ b/keyboards/akb/eb46/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/akb/raine/rules.mk b/keyboards/akb/raine/rules.mk index 335f06bb0a..d1aca1f406 100644 --- a/keyboards/akb/raine/rules.mk +++ b/keyboards/akb/raine/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/alf/dc60/rules.mk b/keyboards/alf/dc60/rules.mk index bf79fc89ca..3ecfb612e6 100644 --- a/keyboards/alf/dc60/rules.mk +++ b/keyboards/alf/dc60/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/alf/x11/rules.mk b/keyboards/alf/x11/rules.mk index 30b880a949..84a047b028 100644 --- a/keyboards/alf/x11/rules.mk +++ b/keyboards/alf/x11/rules.mk @@ -19,5 +19,5 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output EXTRAFLAGS += -flto diff --git a/keyboards/allison/rules.mk b/keyboards/allison/rules.mk index cb2a9f6846..dc7d341bbb 100644 --- a/keyboards/allison/rules.mk +++ b/keyboards/allison/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/allison_numpad/rules.mk b/keyboards/allison_numpad/rules.mk index bddc0a097b..a45d7a8419 100644 --- a/keyboards/allison_numpad/rules.mk +++ b/keyboards/allison_numpad/rules.mk @@ -18,6 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_6x4 numpad_6x4 diff --git a/keyboards/amj96/rules.mk b/keyboards/amj96/rules.mk index 059f5c2553..c19a156ff9 100644 --- a/keyboards/amj96/rules.mk +++ b/keyboards/amj96/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output CUSTOM_MATRIX = yes SRC += matrix.c diff --git a/keyboards/amjkeyboard/amj66/rules.mk b/keyboards/amjkeyboard/amj66/rules.mk index a4e8e6635d..22a8bf5ead 100644 --- a/keyboards/amjkeyboard/amj66/rules.mk +++ b/keyboards/amjkeyboard/amj66/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = 66_ansi 66_iso diff --git a/keyboards/anavi/macropad8/rules.mk b/keyboards/anavi/macropad8/rules.mk index c79605de9f..5916e594b6 100644 --- a/keyboards/anavi/macropad8/rules.mk +++ b/keyboards/anavi/macropad8/rules.mk @@ -14,7 +14,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. OLED_ENABLE = yes OLED_DRIVER = SSD1306 # Enable Support for SSD1306 or SH1106 OLED Displays; Communicating over I2C diff --git a/keyboards/angel17/alpha/rules.mk b/keyboards/angel17/alpha/rules.mk index 12e25cb930..3a5a26351b 100644 --- a/keyboards/angel17/alpha/rules.mk +++ b/keyboards/angel17/alpha/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = numpad_5x4 diff --git a/keyboards/angel17/rev1/rules.mk b/keyboards/angel17/rev1/rules.mk index 1364f1cc0b..2c1b2bb6c6 100644 --- a/keyboards/angel17/rev1/rules.mk +++ b/keyboards/angel17/rev1/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = numpad_5x4 diff --git a/keyboards/angel17/rules.mk b/keyboards/angel17/rules.mk index cb440672b4..06490083f0 100644 --- a/keyboards/angel17/rules.mk +++ b/keyboards/angel17/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = numpad_5x4 diff --git a/keyboards/angel64/rules.mk b/keyboards/angel64/rules.mk index aeeae0a71a..79166def1f 100644 --- a/keyboards/angel64/rules.mk +++ b/keyboards/angel64/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output OLED_ENABLE = yes OLED_DRIVER = SSD1306 CUSTOM_MATRIX = yes diff --git a/keyboards/aos/tkl/rules.mk b/keyboards/aos/tkl/rules.mk index 39c80d987d..b693ed65c2 100644 --- a/keyboards/aos/tkl/rules.mk +++ b/keyboards/aos/tkl/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/aplyard/aplx6/rev1/rules.mk b/keyboards/aplyard/aplx6/rev1/rules.mk index f466d29ce1..8097d5b399 100644 --- a/keyboards/aplyard/aplx6/rev1/rules.mk +++ b/keyboards/aplyard/aplx6/rev1/rules.mk @@ -18,5 +18,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = yes # Unicode diff --git a/keyboards/arabica37/rev1/rules.mk b/keyboards/arabica37/rev1/rules.mk index 0c3ef5ea99..400d254e27 100644 --- a/keyboards/arabica37/rev1/rules.mk +++ b/keyboards/arabica37/rev1/rules.mk @@ -17,6 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD = yes diff --git a/keyboards/ash1800/rules.mk b/keyboards/ash1800/rules.mk index 40d4712747..71d090ad12 100644 --- a/keyboards/ash1800/rules.mk +++ b/keyboards/ash1800/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/ashpil/modelm_usbc/rules.mk b/keyboards/ashpil/modelm_usbc/rules.mk index 9d8462a9c9..71616694cf 100644 --- a/keyboards/ashpil/modelm_usbc/rules.mk +++ b/keyboards/ashpil/modelm_usbc/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/atreus/rules.mk b/keyboards/atreus/rules.mk index e252aa7c04..a8b1249efb 100644 --- a/keyboards/atreus/rules.mk +++ b/keyboards/atreus/rules.mk @@ -13,6 +13,6 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = yes # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output DEFAULT_FOLDER = atreus/astar diff --git a/keyboards/atxkb/1894/rules.mk b/keyboards/atxkb/1894/rules.mk index 1e7fdb5a02..ac64cc93f6 100644 --- a/keyboards/atxkb/1894/rules.mk +++ b/keyboards/atxkb/1894/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LTO_ENABLE = yes LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_tsangan_hhkb diff --git a/keyboards/baguette/rules.mk b/keyboards/baguette/rules.mk index a8c97d8b53..7f71200052 100644 --- a/keyboards/baguette/rules.mk +++ b/keyboards/baguette/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/bakeneko80/rules.mk b/keyboards/bakeneko80/rules.mk index cd1c169c1c..29534f6570 100644 --- a/keyboards/bakeneko80/rules.mk +++ b/keyboards/bakeneko80/rules.mk @@ -18,6 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = tkl_ansi diff --git a/keyboards/bat43/rules.mk b/keyboards/bat43/rules.mk index d80b209562..a9e1a6d2b0 100644 --- a/keyboards/bat43/rules.mk +++ b/keyboards/bat43/rules.mk @@ -18,6 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output DEFAULT_FOLDER = bat43/rev2 diff --git a/keyboards/bear_face/rules.mk b/keyboards/bear_face/rules.mk index 4492e1cd6d..323f872a26 100644 --- a/keyboards/bear_face/rules.mk +++ b/keyboards/bear_face/rules.mk @@ -17,6 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output6 +AUDIO_ENABLE = no # Audio output DEFAULT_FOLDER = bear_face/v1 diff --git a/keyboards/beatervan/rules.mk b/keyboards/beatervan/rules.mk index d6f7511eab..5e0249f4d1 100644 --- a/keyboards/beatervan/rules.mk +++ b/keyboards/beatervan/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = yes # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/blockey/rules.mk b/keyboards/blockey/rules.mk index 976815e8f5..a64106dd1d 100644 --- a/keyboards/blockey/rules.mk +++ b/keyboards/blockey/rules.mk @@ -18,6 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes diff --git a/keyboards/boardsource/4x12/rules.mk b/keyboards/boardsource/4x12/rules.mk index ca3cee8f7b..89477c3f34 100644 --- a/keyboards/boardsource/4x12/rules.mk +++ b/keyboards/boardsource/4x12/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_4x12 diff --git a/keyboards/boardsource/5x12/rules.mk b/keyboards/boardsource/5x12/rules.mk index a6aa498c6d..e14073721b 100644 --- a/keyboards/boardsource/5x12/rules.mk +++ b/keyboards/boardsource/5x12/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_5x12 diff --git a/keyboards/boardwalk/rules.mk b/keyboards/boardwalk/rules.mk index 905748523f..66be996153 100644 --- a/keyboards/boardwalk/rules.mk +++ b/keyboards/boardwalk/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = yes # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/botanicalkeyboards/fm2u/rules.mk b/keyboards/botanicalkeyboards/fm2u/rules.mk index f6c9200188..69ca4affef 100644 --- a/keyboards/botanicalkeyboards/fm2u/rules.mk +++ b/keyboards/botanicalkeyboards/fm2u/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/bpiphany/frosty_flake/keymaps/default/rules.mk b/keyboards/bpiphany/frosty_flake/keymaps/default/rules.mk index 6b3e36879d..0d371a6467 100644 --- a/keyboards/bpiphany/frosty_flake/keymaps/default/rules.mk +++ b/keyboards/bpiphany/frosty_flake/keymaps/default/rules.mk @@ -10,7 +10,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/bpiphany/frosty_flake/keymaps/tkl/rules.mk b/keyboards/bpiphany/frosty_flake/keymaps/tkl/rules.mk index 1d89eaf917..30cf92e0cb 100644 --- a/keyboards/bpiphany/frosty_flake/keymaps/tkl/rules.mk +++ b/keyboards/bpiphany/frosty_flake/keymaps/tkl/rules.mk @@ -10,7 +10,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/bpiphany/frosty_flake/rules.mk b/keyboards/bpiphany/frosty_flake/rules.mk index b9749f4a2f..70f2f53083 100644 --- a/keyboards/bpiphany/frosty_flake/rules.mk +++ b/keyboards/bpiphany/frosty_flake/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output CUSTOM_MATRIX = lite SRC += matrix.c diff --git a/keyboards/bpiphany/kitten_paw/rules.mk b/keyboards/bpiphany/kitten_paw/rules.mk index 92b4a6ee94..8fc863d0b8 100644 --- a/keyboards/bpiphany/kitten_paw/rules.mk +++ b/keyboards/bpiphany/kitten_paw/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output CUSTOM_MATRIX = yes SRC += matrix.c diff --git a/keyboards/bpiphany/pegasushoof/keymaps/default/rules.mk b/keyboards/bpiphany/pegasushoof/keymaps/default/rules.mk index c31adb4d3a..590c0a4649 100644 --- a/keyboards/bpiphany/pegasushoof/keymaps/default/rules.mk +++ b/keyboards/bpiphany/pegasushoof/keymaps/default/rules.mk @@ -11,6 +11,6 @@ CUSTOM_MATRIX = yes # Custom matrix file for the Pegasus Hoof due to the NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/bpiphany/pegasushoof/keymaps/default_jis/rules.mk b/keyboards/bpiphany/pegasushoof/keymaps/default_jis/rules.mk index 5bc8da632a..fa298a7ebd 100644 --- a/keyboards/bpiphany/pegasushoof/keymaps/default_jis/rules.mk +++ b/keyboards/bpiphany/pegasushoof/keymaps/default_jis/rules.mk @@ -11,6 +11,6 @@ CUSTOM_MATRIX = yes # Custom matrix file for the Pegasus Hoof due to the NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/bpiphany/pegasushoof/rules.mk b/keyboards/bpiphany/pegasushoof/rules.mk index 292906f5da..76f79d2111 100644 --- a/keyboards/bpiphany/pegasushoof/rules.mk +++ b/keyboards/bpiphany/pegasushoof/rules.mk @@ -14,7 +14,7 @@ CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/bpiphany/sixshooter/rules.mk b/keyboards/bpiphany/sixshooter/rules.mk index c1f221b2c6..9a3271b904 100644 --- a/keyboards/bpiphany/sixshooter/rules.mk +++ b/keyboards/bpiphany/sixshooter/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/bpiphany/tiger_lily/keymaps/default/rules.mk b/keyboards/bpiphany/tiger_lily/keymaps/default/rules.mk index 638f4ffe53..22af51a29e 100644 --- a/keyboards/bpiphany/tiger_lily/keymaps/default/rules.mk +++ b/keyboards/bpiphany/tiger_lily/keymaps/default/rules.mk @@ -10,7 +10,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/bpiphany/tiger_lily/keymaps/default_ansi/rules.mk b/keyboards/bpiphany/tiger_lily/keymaps/default_ansi/rules.mk index 9e839e7bfc..15deda9435 100644 --- a/keyboards/bpiphany/tiger_lily/keymaps/default_ansi/rules.mk +++ b/keyboards/bpiphany/tiger_lily/keymaps/default_ansi/rules.mk @@ -10,7 +10,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/bpiphany/tiger_lily/rules.mk b/keyboards/bpiphany/tiger_lily/rules.mk index 92b4a6ee94..8fc863d0b8 100644 --- a/keyboards/bpiphany/tiger_lily/rules.mk +++ b/keyboards/bpiphany/tiger_lily/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output CUSTOM_MATRIX = yes SRC += matrix.c diff --git a/keyboards/bpiphany/unloved_bastard/rules.mk b/keyboards/bpiphany/unloved_bastard/rules.mk index 1920185b1d..daa837b18b 100644 --- a/keyboards/bpiphany/unloved_bastard/rules.mk +++ b/keyboards/bpiphany/unloved_bastard/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output CUSTOM_MATRIX = yes SRC += matrix.c diff --git a/keyboards/bthlabs/geekpad/rules.mk b/keyboards/bthlabs/geekpad/rules.mk index e87d687463..90470e67bd 100644 --- a/keyboards/bthlabs/geekpad/rules.mk +++ b/keyboards/bthlabs/geekpad/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/business_card/alpha/rules.mk b/keyboards/business_card/alpha/rules.mk index 6849ace241..2a136256d9 100644 --- a/keyboards/business_card/alpha/rules.mk +++ b/keyboards/business_card/alpha/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output OLED_ENABLE = yes OLED_DRIVER = SSD1306 diff --git a/keyboards/business_card/beta/rules.mk b/keyboards/business_card/beta/rules.mk index 6849ace241..2a136256d9 100644 --- a/keyboards/business_card/beta/rules.mk +++ b/keyboards/business_card/beta/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output OLED_ENABLE = yes OLED_DRIVER = SSD1306 diff --git a/keyboards/business_card/rules.mk b/keyboards/business_card/rules.mk index 1ec1782d98..a95991018a 100644 --- a/keyboards/business_card/rules.mk +++ b/keyboards/business_card/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output DEFAULT_FOLDER = business_card/beta diff --git a/keyboards/c39/rules.mk b/keyboards/c39/rules.mk index c197e7f658..279755f1a1 100755 --- a/keyboards/c39/rules.mk +++ b/keyboards/c39/rules.mk @@ -18,5 +18,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = no # RGB Enable / Disable diff --git a/keyboards/cannonkeys/obliterated75/rules.mk b/keyboards/cannonkeys/obliterated75/rules.mk index a35374715b..60b6bc58de 100644 --- a/keyboards/cannonkeys/obliterated75/rules.mk +++ b/keyboards/cannonkeys/obliterated75/rules.mk @@ -19,7 +19,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output WS2812_DRIVER = spi # Enter lower-power sleep mode when on the ChibiOS idle thread diff --git a/keyboards/chidori/rules.mk b/keyboards/chidori/rules.mk index 0fc860a613..9c418ada94 100644 --- a/keyboards/chidori/rules.mk +++ b/keyboards/chidori/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output CUSTOM_MATRIX = lite diff --git a/keyboards/christmas_tree/V2017/rules.mk b/keyboards/christmas_tree/V2017/rules.mk index ce107055d5..184a1f2247 100644 --- a/keyboards/christmas_tree/V2017/rules.mk +++ b/keyboards/christmas_tree/V2017/rules.mk @@ -1,3 +1,3 @@ BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. -AUDIO_ENABLE = no # Audio output on port C6 \ No newline at end of file +AUDIO_ENABLE = no # Audio output \ No newline at end of file diff --git a/keyboards/christmas_tree/rules.mk b/keyboards/christmas_tree/rules.mk index a0b193ccf8..b86947aca5 100644 --- a/keyboards/christmas_tree/rules.mk +++ b/keyboards/christmas_tree/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/ckeys/nakey/rules.mk b/keyboards/ckeys/nakey/rules.mk index 6874585cbe..74d76917b0 100644 --- a/keyboards/ckeys/nakey/rules.mk +++ b/keyboards/ckeys/nakey/rules.mk @@ -18,6 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = numpad_5x4 diff --git a/keyboards/ckeys/obelus/rules.mk b/keyboards/ckeys/obelus/rules.mk index 848947d235..1c2e1e0cc0 100644 --- a/keyboards/ckeys/obelus/rules.mk +++ b/keyboards/ckeys/obelus/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = yes # MIDI support UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = yes # Audio output on port C6 +AUDIO_ENABLE = yes # Audio output LAYOUTS = ortho_4x4 diff --git a/keyboards/ckeys/washington/rules.mk b/keyboards/ckeys/washington/rules.mk index 2f1219a35d..925ee3d164 100644 --- a/keyboards/ckeys/washington/rules.mk +++ b/keyboards/ckeys/washington/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes # Enable support for encoders OLED_ENABLE = yes OLED_DRIVER = SSD1306 # Enable support for OLED displays diff --git a/keyboards/claw44/rev1/rules.mk b/keyboards/claw44/rev1/rules.mk index d13d3cbfe2..78fa1043ea 100644 --- a/keyboards/claw44/rev1/rules.mk +++ b/keyboards/claw44/rev1/rules.mk @@ -6,7 +6,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SWAP_HANDS_ENABLE = no # Enable one-hand typing diff --git a/keyboards/claw44/rules.mk b/keyboards/claw44/rules.mk index b8ef2356a5..a2bb8e0593 100644 --- a/keyboards/claw44/rules.mk +++ b/keyboards/claw44/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/clawsome/bookerboard/rules.mk b/keyboards/clawsome/bookerboard/rules.mk index 1be37c8630..3c95584e3b 100644 --- a/keyboards/clawsome/bookerboard/rules.mk +++ b/keyboards/clawsome/bookerboard/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/clawsome/coupe/rules.mk b/keyboards/clawsome/coupe/rules.mk index 04b11bc6f5..fd9dcd3089 100644 --- a/keyboards/clawsome/coupe/rules.mk +++ b/keyboards/clawsome/coupe/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = 60_ansi diff --git a/keyboards/clawsome/gamebuddy/v1_0/rules.mk b/keyboards/clawsome/gamebuddy/v1_0/rules.mk index 5fd02cfb56..27f7bdb896 100644 --- a/keyboards/clawsome/gamebuddy/v1_0/rules.mk +++ b/keyboards/clawsome/gamebuddy/v1_0/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/clawsome/sedan/rules.mk b/keyboards/clawsome/sedan/rules.mk index 1165dc61da..d4ad4cbf5c 100644 --- a/keyboards/clawsome/sedan/rules.mk +++ b/keyboards/clawsome/sedan/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = 65_ansi diff --git a/keyboards/clawsome/sidekick/rules.mk b/keyboards/clawsome/sidekick/rules.mk index 1be37c8630..3c95584e3b 100644 --- a/keyboards/clawsome/sidekick/rules.mk +++ b/keyboards/clawsome/sidekick/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/clueboard/card/keymaps/rgb_effects/rules.mk b/keyboards/clueboard/card/keymaps/rgb_effects/rules.mk index 527823d692..91ab65e7e6 100644 --- a/keyboards/clueboard/card/keymaps/rgb_effects/rules.mk +++ b/keyboards/clueboard/card/keymaps/rgb_effects/rules.mk @@ -10,7 +10,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/cocoa40/rules.mk b/keyboards/cocoa40/rules.mk index 398b70469e..3b354a0a92 100644 --- a/keyboards/cocoa40/rules.mk +++ b/keyboards/cocoa40/rules.mk @@ -19,5 +19,5 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD = yes diff --git a/keyboards/contra/rules.mk b/keyboards/contra/rules.mk index 7b5aa05a5d..4624048620 100755 --- a/keyboards/contra/rules.mk +++ b/keyboards/contra/rules.mk @@ -16,7 +16,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = planck_mit ortho_4x12 LAYOUTS_HAS_RGB = no diff --git a/keyboards/converter/hp_46010a/rules.mk b/keyboards/converter/hp_46010a/rules.mk index eb405145eb..a9aa9b4bd7 100644 --- a/keyboards/converter/hp_46010a/rules.mk +++ b/keyboards/converter/hp_46010a/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SPLIT_KEYBOARD = no diff --git a/keyboards/converter/ibm_terminal/keymaps/default/rules.mk b/keyboards/converter/ibm_terminal/keymaps/default/rules.mk index cbec57e1d0..20423329de 100644 --- a/keyboards/converter/ibm_terminal/keymaps/default/rules.mk +++ b/keyboards/converter/ibm_terminal/keymaps/default/rules.mk @@ -10,7 +10,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. PS2_USE_USART = yes diff --git a/keyboards/converter/ibm_terminal/rules.mk b/keyboards/converter/ibm_terminal/rules.mk index 495368095e..798211eecd 100644 --- a/keyboards/converter/ibm_terminal/rules.mk +++ b/keyboards/converter/ibm_terminal/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. PS2_USE_USART = yes diff --git a/keyboards/converter/modelm101/rules.mk b/keyboards/converter/modelm101/rules.mk index aebe723bf1..23496ae936 100644 --- a/keyboards/converter/modelm101/rules.mk +++ b/keyboards/converter/modelm101/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/converter/numeric_keypad_IIe/rules.mk b/keyboards/converter/numeric_keypad_IIe/rules.mk index 041dabc194..8fde4f64f1 100644 --- a/keyboards/converter/numeric_keypad_IIe/rules.mk +++ b/keyboards/converter/numeric_keypad_IIe/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/converter/palm_usb/rules.mk b/keyboards/converter/palm_usb/rules.mk index da5f7921a6..e777724a8d 100644 --- a/keyboards/converter/palm_usb/rules.mk +++ b/keyboards/converter/palm_usb/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/converter/sun_usb/rules.mk b/keyboards/converter/sun_usb/rules.mk index 9e2bbf6f03..1018a1a6c7 100644 --- a/keyboards/converter/sun_usb/rules.mk +++ b/keyboards/converter/sun_usb/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/converter/usb_usb/ble/rules.mk b/keyboards/converter/usb_usb/ble/rules.mk index c54138918b..873283f928 100644 --- a/keyboards/converter/usb_usb/ble/rules.mk +++ b/keyboards/converter/usb_usb/ble/rules.mk @@ -14,7 +14,7 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output BLUETOOTH = AdafruitBLE ADAFRUIT_BLE_ENABLE = yes diff --git a/keyboards/copenhagen_click/click_pad_v1/rules.mk b/keyboards/copenhagen_click/click_pad_v1/rules.mk index f3224bae62..dd71f44ccd 100755 --- a/keyboards/copenhagen_click/click_pad_v1/rules.mk +++ b/keyboards/copenhagen_click/click_pad_v1/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/coseyfannitutti/discipad/rules.mk b/keyboards/coseyfannitutti/discipad/rules.mk index 29f8bd8e7e..fb6dfb8440 100644 --- a/keyboards/coseyfannitutti/discipad/rules.mk +++ b/keyboards/coseyfannitutti/discipad/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/coseyfannitutti/discipline/rules.mk b/keyboards/coseyfannitutti/discipline/rules.mk index 73aa3a301f..0d09ea45bd 100644 --- a/keyboards/coseyfannitutti/discipline/rules.mk +++ b/keyboards/coseyfannitutti/discipline/rules.mk @@ -22,6 +22,6 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = 65_ansi 65_ansi_blocker 65_iso 65_iso_blocker diff --git a/keyboards/coseyfannitutti/mullet/rules.mk b/keyboards/coseyfannitutti/mullet/rules.mk index 25f9620114..f59e51dbb2 100644 --- a/keyboards/coseyfannitutti/mullet/rules.mk +++ b/keyboards/coseyfannitutti/mullet/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/coseyfannitutti/mulletpad/rules.mk b/keyboards/coseyfannitutti/mulletpad/rules.mk index bbe4c5ce6c..e9b5297ad2 100644 --- a/keyboards/coseyfannitutti/mulletpad/rules.mk +++ b/keyboards/coseyfannitutti/mulletpad/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = numpad_5x4 diff --git a/keyboards/coseyfannitutti/mysterium/rules.mk b/keyboards/coseyfannitutti/mysterium/rules.mk index 87c814e1af..9d2c2337df 100644 --- a/keyboards/coseyfannitutti/mysterium/rules.mk +++ b/keyboards/coseyfannitutti/mysterium/rules.mk @@ -22,6 +22,6 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = tkl_ansi diff --git a/keyboards/coseyfannitutti/romeo/rules.mk b/keyboards/coseyfannitutti/romeo/rules.mk index 3477644d17..ebe8f0684e 100644 --- a/keyboards/coseyfannitutti/romeo/rules.mk +++ b/keyboards/coseyfannitutti/romeo/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/cu24/rules.mk b/keyboards/cu24/rules.mk index e0ca0243ab..af20d51c46 100644 --- a/keyboards/cu24/rules.mk +++ b/keyboards/cu24/rules.mk @@ -18,5 +18,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes # RGB drivers diff --git a/keyboards/cu75/keymaps/default/rules.mk b/keyboards/cu75/keymaps/default/rules.mk index b0b31628ce..0b6f02ff9f 100644 --- a/keyboards/cu75/keymaps/default/rules.mk +++ b/keyboards/cu75/keymaps/default/rules.mk @@ -11,7 +11,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Disable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Disable RGB underlight RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lefkeyboards, not WS2812 diff --git a/keyboards/cu75/keymaps/iso/rules.mk b/keyboards/cu75/keymaps/iso/rules.mk index 322cbae0e3..5e4eca532f 100644 --- a/keyboards/cu75/keymaps/iso/rules.mk +++ b/keyboards/cu75/keymaps/iso/rules.mk @@ -11,7 +11,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # BACKLIGHT_ENABLE = no # Disable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Disable RGB underlight RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lefkeyboards, not WS2812 diff --git a/keyboards/cu80/rules.mk b/keyboards/cu80/rules.mk index 4be7eb78f8..13629b3e04 100644 --- a/keyboards/cu80/rules.mk +++ b/keyboards/cu80/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = tkl_iso tkl_ansi diff --git a/keyboards/cutie_club/wraith/rules.mk b/keyboards/cutie_club/wraith/rules.mk index cde7613127..dec6e693f7 100644 --- a/keyboards/cutie_club/wraith/rules.mk +++ b/keyboards/cutie_club/wraith/rules.mk @@ -16,4 +16,4 @@ NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/dc01/arrow/rules.mk b/keyboards/dc01/arrow/rules.mk index 9cf1c65d54..61153f4bc6 100644 --- a/keyboards/dc01/arrow/rules.mk +++ b/keyboards/dc01/arrow/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output NO_USB_STARTUP_CHECK = yes # Disable initialization only when usb is plugged in CUSTOM_MATRIX = yes # Use custom matrix SRC += matrix.c \ diff --git a/keyboards/dc01/left/rules.mk b/keyboards/dc01/left/rules.mk index bbfdff1d55..f6864f8a63 100644 --- a/keyboards/dc01/left/rules.mk +++ b/keyboards/dc01/left/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output CUSTOM_MATRIX = yes # Use custom matrix SRC += matrix.c \ diff --git a/keyboards/dc01/numpad/rules.mk b/keyboards/dc01/numpad/rules.mk index 6b9f18c07d..ae3f6b4e4f 100644 --- a/keyboards/dc01/numpad/rules.mk +++ b/keyboards/dc01/numpad/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output NO_USB_STARTUP_CHECK = yes # Disable initialization only when usb is plugged in CUSTOM_MATRIX = yes # Use custom matrix SRC += matrix.c \ diff --git a/keyboards/dc01/right/rules.mk b/keyboards/dc01/right/rules.mk index 9cf1c65d54..61153f4bc6 100644 --- a/keyboards/dc01/right/rules.mk +++ b/keyboards/dc01/right/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output NO_USB_STARTUP_CHECK = yes # Disable initialization only when usb is plugged in CUSTOM_MATRIX = yes # Use custom matrix SRC += matrix.c \ diff --git a/keyboards/deltasplit75/rules.mk b/keyboards/deltasplit75/rules.mk index 51e26259a8..ced23bb50e 100644 --- a/keyboards/deltasplit75/rules.mk +++ b/keyboards/deltasplit75/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD = yes diff --git a/keyboards/diverge3/rules.mk b/keyboards/diverge3/rules.mk index ee55e6719b..925cf0ca21 100644 --- a/keyboards/diverge3/rules.mk +++ b/keyboards/diverge3/rules.mk @@ -14,7 +14,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SPLIT_KEYBOARD = yes diff --git a/keyboards/divergetm2/rules.mk b/keyboards/divergetm2/rules.mk index 6fe960808a..7fd231fc16 100644 --- a/keyboards/divergetm2/rules.mk +++ b/keyboards/divergetm2/rules.mk @@ -14,7 +14,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/dm9records/ergoinu/keymaps/default/rules.mk b/keyboards/dm9records/ergoinu/keymaps/default/rules.mk index bbf813b241..0f2819358d 100644 --- a/keyboards/dm9records/ergoinu/keymaps/default/rules.mk +++ b/keyboards/dm9records/ergoinu/keymaps/default/rules.mk @@ -11,7 +11,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. SWAP_HANDS_ENABLE = no # Enable one-hand typing diff --git a/keyboards/dm9records/ergoinu/keymaps/default_jis/rules.mk b/keyboards/dm9records/ergoinu/keymaps/default_jis/rules.mk index eec4251635..fa7ec3131f 100644 --- a/keyboards/dm9records/ergoinu/keymaps/default_jis/rules.mk +++ b/keyboards/dm9records/ergoinu/keymaps/default_jis/rules.mk @@ -11,7 +11,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. SWAP_HANDS_ENABLE = no # Enable one-hand typing diff --git a/keyboards/dm9records/ergoinu/rules.mk b/keyboards/dm9records/ergoinu/rules.mk index 0a2c6dc430..1082772d7a 100644 --- a/keyboards/dm9records/ergoinu/rules.mk +++ b/keyboards/dm9records/ergoinu/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SUBPROJECT_rev1 = no diff --git a/keyboards/dm9records/plaid/rules.mk b/keyboards/dm9records/plaid/rules.mk index 810bcf4118..f11e542ddc 100644 --- a/keyboards/dm9records/plaid/rules.mk +++ b/keyboards/dm9records/plaid/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_4x12 planck_mit LAYOUTS_HAS_RGB = no diff --git a/keyboards/dm9records/tartan/rules.mk b/keyboards/dm9records/tartan/rules.mk index 3b7605538f..3e8c4bd8f1 100644 --- a/keyboards/dm9records/tartan/rules.mk +++ b/keyboards/dm9records/tartan/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_iso 60_iso_split_bs_rshift LAYOUTS_HAS_RGB = no diff --git a/keyboards/dmqdesign/spin/rules.mk b/keyboards/dmqdesign/spin/rules.mk index b424374532..174c0b0c18 100644 --- a/keyboards/dmqdesign/spin/rules.mk +++ b/keyboards/dmqdesign/spin/rules.mk @@ -20,5 +20,5 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = yes # MIDI support UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes # Enable rotary encoder support diff --git a/keyboards/do60/rules.mk b/keyboards/do60/rules.mk index 9a0aac0ef0..0200becc50 100644 --- a/keyboards/do60/rules.mk +++ b/keyboards/do60/rules.mk @@ -5,7 +5,7 @@ MCU = atmega32u4 BOOTLOADER = atmel-dfu # Build Options -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite COMMAND_ENABLE = no # Commands for debug and configuration diff --git a/keyboards/doppelganger/rules.mk b/keyboards/doppelganger/rules.mk index f829b583e1..45f1a0f06f 100644 --- a/keyboards/doppelganger/rules.mk +++ b/keyboards/doppelganger/rules.mk @@ -19,5 +19,5 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD = yes diff --git a/keyboards/doro67/multi/rules.mk b/keyboards/doro67/multi/rules.mk index 678f3b3e2d..c0da196665 100644 --- a/keyboards/doro67/multi/rules.mk +++ b/keyboards/doro67/multi/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = 65_ansi_blocker diff --git a/keyboards/doro67/regular/rules.mk b/keyboards/doro67/regular/rules.mk index 62d2b0a77b..3b36ddf9a7 100644 --- a/keyboards/doro67/regular/rules.mk +++ b/keyboards/doro67/regular/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = 65_ansi_blocker diff --git a/keyboards/doro67/rgb/rules.mk b/keyboards/doro67/rgb/rules.mk index fc5dfa9ef1..672edb1ee3 100644 --- a/keyboards/doro67/rgb/rules.mk +++ b/keyboards/doro67/rgb/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGB_MATRIX_ENABLE = yes RGB_MATRIX_DRIVER = WS2812 diff --git a/keyboards/dozen0/rules.mk b/keyboards/dozen0/rules.mk index 4f80eb6549..89eb1fa8aa 100644 --- a/keyboards/dozen0/rules.mk +++ b/keyboards/dozen0/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/dp60/rules.mk b/keyboards/dp60/rules.mk index d89f2287ac..496b55a88e 100644 --- a/keyboards/dp60/rules.mk +++ b/keyboards/dp60/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = no # Use RGB underglow light RGB_MATRIX_ENABLE = yes RGB_MATRIX_DRIVER = IS31FL3731 # Use RGB matrix diff --git a/keyboards/duck/jetfire/rules.mk b/keyboards/duck/jetfire/rules.mk index 692a8e524c..cc6b551386 100644 --- a/keyboards/duck/jetfire/rules.mk +++ b/keyboards/duck/jetfire/rules.mk @@ -20,7 +20,7 @@ BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality BACKLIGHT_DRIVER = custom RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output CUSTOM_MATRIX = yes SRC += indicator_leds.c \ diff --git a/keyboards/duck/lightsaver/rules.mk b/keyboards/duck/lightsaver/rules.mk index b916496826..5136f79e7b 100644 --- a/keyboards/duck/lightsaver/rules.mk +++ b/keyboards/duck/lightsaver/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality BACKLIGHT_DRIVER = custom UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes CUSTOM_MATRIX = yes diff --git a/keyboards/duck/octagon/v1/rules.mk b/keyboards/duck/octagon/v1/rules.mk index 28e8531ca3..62c4d37caf 100644 --- a/keyboards/duck/octagon/v1/rules.mk +++ b/keyboards/duck/octagon/v1/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality BACKLIGHT_DRIVER = custom UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes CUSTOM_MATRIX = yes diff --git a/keyboards/duck/octagon/v2/rules.mk b/keyboards/duck/octagon/v2/rules.mk index cfd7894a9d..09a363c391 100644 --- a/keyboards/duck/octagon/v2/rules.mk +++ b/keyboards/duck/octagon/v2/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality BACKLIGHT_DRIVER = custom UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes CUSTOM_MATRIX = yes diff --git a/keyboards/duck/orion/v3/rules.mk b/keyboards/duck/orion/v3/rules.mk index f65093a9a9..5c9fa9cb81 100644 --- a/keyboards/duck/orion/v3/rules.mk +++ b/keyboards/duck/orion/v3/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality BACKLIGHT_DRIVER = custom UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes CUSTOM_MATRIX = yes diff --git a/keyboards/duck/tcv3/rules.mk b/keyboards/duck/tcv3/rules.mk index 8be02e8d5b..ac5e4e89a0 100644 --- a/keyboards/duck/tcv3/rules.mk +++ b/keyboards/duck/tcv3/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes CUSTOM_MATRIX = yes diff --git a/keyboards/dztech/dz60rgb/v1/rules.mk b/keyboards/dztech/dz60rgb/v1/rules.mk index 19cd79bae5..8b6dda84db 100644 --- a/keyboards/dztech/dz60rgb/v1/rules.mk +++ b/keyboards/dztech/dz60rgb/v1/rules.mk @@ -19,7 +19,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGB_MATRIX_ENABLE = yes # Use RGB matrix RGB_MATRIX_DRIVER = IS31FL3733 NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in diff --git a/keyboards/dztech/dz60rgb/v2/rules.mk b/keyboards/dztech/dz60rgb/v2/rules.mk index 3d6d2a3148..c4d5352324 100644 --- a/keyboards/dztech/dz60rgb/v2/rules.mk +++ b/keyboards/dztech/dz60rgb/v2/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGB_MATRIX_ENABLE = yes # Use RGB matrix RGB_MATRIX_DRIVER = IS31FL3733 NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in diff --git a/keyboards/dztech/dz60rgb_ansi/v1/rules.mk b/keyboards/dztech/dz60rgb_ansi/v1/rules.mk index 19cd79bae5..8b6dda84db 100644 --- a/keyboards/dztech/dz60rgb_ansi/v1/rules.mk +++ b/keyboards/dztech/dz60rgb_ansi/v1/rules.mk @@ -19,7 +19,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGB_MATRIX_ENABLE = yes # Use RGB matrix RGB_MATRIX_DRIVER = IS31FL3733 NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in diff --git a/keyboards/dztech/dz60rgb_ansi/v2/rules.mk b/keyboards/dztech/dz60rgb_ansi/v2/rules.mk index 3d6d2a3148..c4d5352324 100644 --- a/keyboards/dztech/dz60rgb_ansi/v2/rules.mk +++ b/keyboards/dztech/dz60rgb_ansi/v2/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGB_MATRIX_ENABLE = yes # Use RGB matrix RGB_MATRIX_DRIVER = IS31FL3733 NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in diff --git a/keyboards/dztech/dz60rgb_wkl/v1/rules.mk b/keyboards/dztech/dz60rgb_wkl/v1/rules.mk index 91832c2bf5..772964b55a 100644 --- a/keyboards/dztech/dz60rgb_wkl/v1/rules.mk +++ b/keyboards/dztech/dz60rgb_wkl/v1/rules.mk @@ -19,7 +19,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGB_MATRIX_ENABLE = yes # Use RGB matrix RGB_MATRIX_DRIVER = IS31FL3733 NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in diff --git a/keyboards/dztech/dz60rgb_wkl/v2/rules.mk b/keyboards/dztech/dz60rgb_wkl/v2/rules.mk index 18061c2925..ac27bbf140 100644 --- a/keyboards/dztech/dz60rgb_wkl/v2/rules.mk +++ b/keyboards/dztech/dz60rgb_wkl/v2/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGB_MATRIX_ENABLE = yes # Use RGB matrix RGB_MATRIX_DRIVER = IS31FL3733 NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in diff --git a/keyboards/dztech/dz65rgb/v1/rules.mk b/keyboards/dztech/dz65rgb/v1/rules.mk index 288329fd8e..9f2c7b41cb 100644 --- a/keyboards/dztech/dz65rgb/v1/rules.mk +++ b/keyboards/dztech/dz65rgb/v1/rules.mk @@ -19,7 +19,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGB_MATRIX_ENABLE = yes # Use RGB matrix RGB_MATRIX_DRIVER = IS31FL3731 diff --git a/keyboards/dztech/dz65rgb/v2/rules.mk b/keyboards/dztech/dz65rgb/v2/rules.mk index aecfccf67a..c8c752f5b2 100644 --- a/keyboards/dztech/dz65rgb/v2/rules.mk +++ b/keyboards/dztech/dz65rgb/v2/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGB_MATRIX_ENABLE = yes # Use RGB matrix RGB_MATRIX_DRIVER = IS31FL3731 diff --git a/keyboards/eco/keymaps/default/rules.mk b/keyboards/eco/keymaps/default/rules.mk index 463a63c572..6da87da43a 100644 --- a/keyboards/eco/keymaps/default/rules.mk +++ b/keyboards/eco/keymaps/default/rules.mk @@ -12,7 +12,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/emptystring/NQG/rules.mk b/keyboards/emptystring/NQG/rules.mk index 340ad4bc23..4ff1393358 100644 --- a/keyboards/emptystring/NQG/rules.mk +++ b/keyboards/emptystring/NQG/rules.mk @@ -15,6 +15,6 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/eniigmakeyboards/ek87/rules.mk b/keyboards/eniigmakeyboards/ek87/rules.mk index 64d77a983f..d2df5bff40 100644 --- a/keyboards/eniigmakeyboards/ek87/rules.mk +++ b/keyboards/eniigmakeyboards/ek87/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/ep/40/rules.mk b/keyboards/ep/40/rules.mk index 599233dc86..5ecb0d59ab 100644 --- a/keyboards/ep/40/rules.mk +++ b/keyboards/ep/40/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/ep/96/rules.mk b/keyboards/ep/96/rules.mk index 599233dc86..5ecb0d59ab 100644 --- a/keyboards/ep/96/rules.mk +++ b/keyboards/ep/96/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/ep/comsn/hs68/rules.mk b/keyboards/ep/comsn/hs68/rules.mk index 39160e9865..86bb4c7592 100644 --- a/keyboards/ep/comsn/hs68/rules.mk +++ b/keyboards/ep/comsn/hs68/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/ep/comsn/mollydooker/rules.mk b/keyboards/ep/comsn/mollydooker/rules.mk index 1bf22e08f5..7d62fd7d27 100644 --- a/keyboards/ep/comsn/mollydooker/rules.mk +++ b/keyboards/ep/comsn/mollydooker/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/ep/comsn/tf_longeboye/rules.mk b/keyboards/ep/comsn/tf_longeboye/rules.mk index 335f06bb0a..d1aca1f406 100644 --- a/keyboards/ep/comsn/tf_longeboye/rules.mk +++ b/keyboards/ep/comsn/tf_longeboye/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/ergo42/rules.mk b/keyboards/ergo42/rules.mk index 53f956db09..03a0147fd1 100644 --- a/keyboards/ergo42/rules.mk +++ b/keyboards/ergo42/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD = yes diff --git a/keyboards/ergodash/rules.mk b/keyboards/ergodash/rules.mk index 644e78f999..a9a9e79e06 100644 --- a/keyboards/ergodash/rules.mk +++ b/keyboards/ergodash/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/ergosaurus/rules.mk b/keyboards/ergosaurus/rules.mk index aa95c2be33..add434b9f3 100644 --- a/keyboards/ergosaurus/rules.mk +++ b/keyboards/ergosaurus/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = alice_split_bs diff --git a/keyboards/ergoslab/rules.mk b/keyboards/ergoslab/rules.mk index b565f618ae..daadab823d 100644 --- a/keyboards/ergoslab/rules.mk +++ b/keyboards/ergoslab/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/ergotravel/rules.mk b/keyboards/ergotravel/rules.mk index 7e6ba31efd..2b9c4f693e 100644 --- a/keyboards/ergotravel/rules.mk +++ b/keyboards/ergotravel/rules.mk @@ -9,7 +9,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/ericrlau/numdiscipline/rev1/rules.mk b/keyboards/ericrlau/numdiscipline/rev1/rules.mk index 8ffda7cd69..6ead973dcb 100644 --- a/keyboards/ericrlau/numdiscipline/rev1/rules.mk +++ b/keyboards/ericrlau/numdiscipline/rev1/rules.mk @@ -22,4 +22,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/evil80/rules.mk b/keyboards/evil80/rules.mk index e0d3d2e496..d501f843b3 100644 --- a/keyboards/evil80/rules.mk +++ b/keyboards/evil80/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/evyd13/eon40/rules.mk b/keyboards/evyd13/eon40/rules.mk index 89d9a33803..2f60b80109 100644 --- a/keyboards/evyd13/eon40/rules.mk +++ b/keyboards/evyd13/eon40/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes LAYOUTS = ortho_4x12 planck_mit diff --git a/keyboards/evyd13/eon65/rules.mk b/keyboards/evyd13/eon65/rules.mk index f8f181fed6..c03d696bf8 100644 --- a/keyboards/evyd13/eon65/rules.mk +++ b/keyboards/evyd13/eon65/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = 65_ansi 65_ansi_blocker 65_iso 65_iso_blocker diff --git a/keyboards/evyd13/eon75/rules.mk b/keyboards/evyd13/eon75/rules.mk index 3e236148d5..e658b597c0 100644 --- a/keyboards/evyd13/eon75/rules.mk +++ b/keyboards/evyd13/eon75/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/evyd13/eon87/rules.mk b/keyboards/evyd13/eon87/rules.mk index c7682a382f..da70a1f7e5 100644 --- a/keyboards/evyd13/eon87/rules.mk +++ b/keyboards/evyd13/eon87/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = tkl_ansi tkl_iso diff --git a/keyboards/evyd13/eon95/rules.mk b/keyboards/evyd13/eon95/rules.mk index 3e236148d5..e658b597c0 100644 --- a/keyboards/evyd13/eon95/rules.mk +++ b/keyboards/evyd13/eon95/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/evyd13/minitomic/rules.mk b/keyboards/evyd13/minitomic/rules.mk index 73a7b34362..469407d979 100644 --- a/keyboards/evyd13/minitomic/rules.mk +++ b/keyboards/evyd13/minitomic/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/evyd13/mx5160/rules.mk b/keyboards/evyd13/mx5160/rules.mk index bb9fcc2058..1edc2129af 100644 --- a/keyboards/evyd13/mx5160/rules.mk +++ b/keyboards/evyd13/mx5160/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/evyd13/nt660/rules.mk b/keyboards/evyd13/nt660/rules.mk index d8936bde16..93860bde0d 100644 --- a/keyboards/evyd13/nt660/rules.mk +++ b/keyboards/evyd13/nt660/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = 66_ansi 66_iso diff --git a/keyboards/evyd13/omrontkl/rules.mk b/keyboards/evyd13/omrontkl/rules.mk index 9f4efd945e..46df566b7b 100644 --- a/keyboards/evyd13/omrontkl/rules.mk +++ b/keyboards/evyd13/omrontkl/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/evyd13/ta65/rules.mk b/keyboards/evyd13/ta65/rules.mk index 28af97bd6f..a8c0ec30f5 100644 --- a/keyboards/evyd13/ta65/rules.mk +++ b/keyboards/evyd13/ta65/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes LAYOUTS = 65_ansi 65_iso diff --git a/keyboards/evyd13/wasdat/rules.mk b/keyboards/evyd13/wasdat/rules.mk index 000b9ec5e0..897c216a20 100644 --- a/keyboards/evyd13/wasdat/rules.mk +++ b/keyboards/evyd13/wasdat/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output CUSTOM_MATRIX = lite SRC += matrix.c diff --git a/keyboards/evyd13/wasdat_code/rules.mk b/keyboards/evyd13/wasdat_code/rules.mk index 149e21c368..636e48b5ff 100644 --- a/keyboards/evyd13/wasdat_code/rules.mk +++ b/keyboards/evyd13/wasdat_code/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output CUSTOM_MATRIX = lite SRC += matrix.c diff --git a/keyboards/exclusive/e6_rgb/rules.mk b/keyboards/exclusive/e6_rgb/rules.mk index c8cd855764..1e0bfd0b07 100644 --- a/keyboards/exclusive/e6_rgb/rules.mk +++ b/keyboards/exclusive/e6_rgb/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes # Use RGB underglow light RGB_MATRIX_ENABLE = no # Use RGB matrix RGB_MATRIX_DRIVER = IS31FL3733 diff --git a/keyboards/exclusive/e6v2/le/rules.mk b/keyboards/exclusive/e6v2/le/rules.mk index b150e744e0..8a46f7d068 100644 --- a/keyboards/exclusive/e6v2/le/rules.mk +++ b/keyboards/exclusive/e6v2/le/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = 60_ansi diff --git a/keyboards/exclusive/e6v2/le_bmc/rules.mk b/keyboards/exclusive/e6v2/le_bmc/rules.mk index ed563747b9..6046e15c52 100644 --- a/keyboards/exclusive/e6v2/le_bmc/rules.mk +++ b/keyboards/exclusive/e6v2/le_bmc/rules.mk @@ -20,4 +20,4 @@ BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality WS2812_DRIVER = i2c RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/exclusive/e6v2/oe/rules.mk b/keyboards/exclusive/e6v2/oe/rules.mk index b150e744e0..8a46f7d068 100644 --- a/keyboards/exclusive/e6v2/oe/rules.mk +++ b/keyboards/exclusive/e6v2/oe/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = 60_ansi diff --git a/keyboards/exclusive/e6v2/oe_bmc/rules.mk b/keyboards/exclusive/e6v2/oe_bmc/rules.mk index ed563747b9..6046e15c52 100644 --- a/keyboards/exclusive/e6v2/oe_bmc/rules.mk +++ b/keyboards/exclusive/e6v2/oe_bmc/rules.mk @@ -20,4 +20,4 @@ BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality WS2812_DRIVER = i2c RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/exclusive/e7v1se/rules.mk b/keyboards/exclusive/e7v1se/rules.mk index edd546d69f..dff8d21f97 100644 --- a/keyboards/exclusive/e7v1se/rules.mk +++ b/keyboards/exclusive/e7v1se/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/felix/rules.mk b/keyboards/felix/rules.mk index 10f3dd2386..e664377961 100644 --- a/keyboards/felix/rules.mk +++ b/keyboards/felix/rules.mk @@ -18,6 +18,6 @@ NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_5x4 diff --git a/keyboards/flehrad/downbubble/rules.mk b/keyboards/flehrad/downbubble/rules.mk index dd867d5b18..9e4f6779a3 100644 --- a/keyboards/flehrad/downbubble/rules.mk +++ b/keyboards/flehrad/downbubble/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/fleuron/rules.mk b/keyboards/fleuron/rules.mk index b8b64abd43..7c4829206f 100644 --- a/keyboards/fleuron/rules.mk +++ b/keyboards/fleuron/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes diff --git a/keyboards/fluorite/rules.mk b/keyboards/fluorite/rules.mk index dc3c448405..b7061f6515 100644 --- a/keyboards/fluorite/rules.mk +++ b/keyboards/fluorite/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD = yes diff --git a/keyboards/flx/lodestone/rules.mk b/keyboards/flx/lodestone/rules.mk index 6dd50371c5..3da7e82fc5 100644 --- a/keyboards/flx/lodestone/rules.mk +++ b/keyboards/flx/lodestone/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LTO_ENABLE = yes LAYOUTS = 65_ansi_blocker 65_ansi_blocker_split_bs 65_iso_blocker 65_iso_blocker_split_bs diff --git a/keyboards/flx/virgo/rules.mk b/keyboards/flx/virgo/rules.mk index 015d40b430..1a8ba031c4 100644 --- a/keyboards/flx/virgo/rules.mk +++ b/keyboards/flx/virgo/rules.mk @@ -19,5 +19,5 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LTO_ENABLE = yes diff --git a/keyboards/fortitude60/rules.mk b/keyboards/fortitude60/rules.mk index 521f65f677..ebbb18e5e6 100644 --- a/keyboards/fortitude60/rules.mk +++ b/keyboards/fortitude60/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD = yes diff --git a/keyboards/foxlab/leaf60/hotswap/rules.mk b/keyboards/foxlab/leaf60/hotswap/rules.mk index 15bb28a6e7..2e17d21130 100644 --- a/keyboards/foxlab/leaf60/hotswap/rules.mk +++ b/keyboards/foxlab/leaf60/hotswap/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/foxlab/leaf60/universal/rules.mk b/keyboards/foxlab/leaf60/universal/rules.mk index 73bfb0aed4..97d1372ed3 100644 --- a/keyboards/foxlab/leaf60/universal/rules.mk +++ b/keyboards/foxlab/leaf60/universal/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = 60_ansi 60_hhkb diff --git a/keyboards/fractal/rules.mk b/keyboards/fractal/rules.mk index 191568ecee..bde1891616 100755 --- a/keyboards/fractal/rules.mk +++ b/keyboards/fractal/rules.mk @@ -16,7 +16,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_5x12 # preonic_mit LAYOUTS_HAS_RGB = no diff --git a/keyboards/funky40/rules.mk b/keyboards/funky40/rules.mk index b38c927b76..962a601b16 100644 --- a/keyboards/funky40/rules.mk +++ b/keyboards/funky40/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/gami_studio/lex60/rules.mk b/keyboards/gami_studio/lex60/rules.mk index 711126c14a..e312e7afd6 100644 --- a/keyboards/gami_studio/lex60/rules.mk +++ b/keyboards/gami_studio/lex60/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/geekboards/tester/rules.mk b/keyboards/geekboards/tester/rules.mk index 6316052f5a..d782f41bb8 100644 --- a/keyboards/geekboards/tester/rules.mk +++ b/keyboards/geekboards/tester/rules.mk @@ -18,6 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGB_MATRIX_ENABLE = yes # Use RGB matrix RGB_MATRIX_DRIVER = IS31FL3731 diff --git a/keyboards/getta25/rules.mk b/keyboards/getta25/rules.mk index faa81a3378..0e60b95b90 100644 --- a/keyboards/getta25/rules.mk +++ b/keyboards/getta25/rules.mk @@ -14,7 +14,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. OLED_ENABLE = no diff --git a/keyboards/gh60/satan/keymaps/default/rules.mk b/keyboards/gh60/satan/keymaps/default/rules.mk index c3dc585c58..9bd14ac70a 100644 --- a/keyboards/gh60/satan/keymaps/default/rules.mk +++ b/keyboards/gh60/satan/keymaps/default/rules.mk @@ -10,7 +10,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/gingham/rules.mk b/keyboards/gingham/rules.mk index beb9c6a1b9..c87c3cffba 100644 --- a/keyboards/gingham/rules.mk +++ b/keyboards/gingham/rules.mk @@ -22,6 +22,6 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output CUSTOM_MATRIX = lite diff --git a/keyboards/gon/nerdtkl/rules.mk b/keyboards/gon/nerdtkl/rules.mk index b81d0ab895..b7558ad55d 100644 --- a/keyboards/gon/nerdtkl/rules.mk +++ b/keyboards/gon/nerdtkl/rules.mk @@ -22,4 +22,4 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/gray_studio/cod67/rules.mk b/keyboards/gray_studio/cod67/rules.mk index 852f61911f..e770efbc56 100644 --- a/keyboards/gray_studio/cod67/rules.mk +++ b/keyboards/gray_studio/cod67/rules.mk @@ -22,4 +22,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/gray_studio/space65/rules.mk b/keyboards/gray_studio/space65/rules.mk index 891fa2f991..113bab30e1 100644 --- a/keyboards/gray_studio/space65/rules.mk +++ b/keyboards/gray_studio/space65/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = 65_ansi_blocker 65_iso_blocker diff --git a/keyboards/gray_studio/think65/hotswap/rules.mk b/keyboards/gray_studio/think65/hotswap/rules.mk index 204efa299e..b9c622092c 100644 --- a/keyboards/gray_studio/think65/hotswap/rules.mk +++ b/keyboards/gray_studio/think65/hotswap/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LTO_ENABLE = yes diff --git a/keyboards/gray_studio/think65/solder/rules.mk b/keyboards/gray_studio/think65/solder/rules.mk index 204efa299e..b9c622092c 100644 --- a/keyboards/gray_studio/think65/solder/rules.mk +++ b/keyboards/gray_studio/think65/solder/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LTO_ENABLE = yes diff --git a/keyboards/grid600/press/rules.mk b/keyboards/grid600/press/rules.mk index e9755513dd..f7f8f51a4a 100644 --- a/keyboards/grid600/press/rules.mk +++ b/keyboards/grid600/press/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/hadron/ver2/rules.mk b/keyboards/hadron/ver2/rules.mk index f2ec0e7b3f..8e211be4a5 100644 --- a/keyboards/hadron/ver2/rules.mk +++ b/keyboards/hadron/ver2/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. SWAP_HANDS_ENABLE = no # Enable one-hand typing diff --git a/keyboards/halberd/rules.mk b/keyboards/halberd/rules.mk index 432e26a6fe..cc74a1278a 100644 --- a/keyboards/halberd/rules.mk +++ b/keyboards/halberd/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/108key_trackpoint/rules.mk b/keyboards/handwired/108key_trackpoint/rules.mk index 3c10538b60..9c47429b0a 100644 --- a/keyboards/handwired/108key_trackpoint/rules.mk +++ b/keyboards/handwired/108key_trackpoint/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output PS2_MOUSE_ENABLE = yes PS2_USE_USART = yes diff --git a/keyboards/handwired/412_64/rules.mk b/keyboards/handwired/412_64/rules.mk index c38410546e..51b6c665cd 100644 --- a/keyboards/handwired/412_64/rules.mk +++ b/keyboards/handwired/412_64/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/42/rules.mk b/keyboards/handwired/42/rules.mk index a61114628f..d31cbe9a1c 100644 --- a/keyboards/handwired/42/rules.mk +++ b/keyboards/handwired/42/rules.mk @@ -21,7 +21,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode UNICODEMAP_ENABLE = no # ^^ diff --git a/keyboards/handwired/aplx2/rules.mk b/keyboards/handwired/aplx2/rules.mk index c8d5e535da..41ce4d9fe9 100644 --- a/keyboards/handwired/aplx2/rules.mk +++ b/keyboards/handwired/aplx2/rules.mk @@ -18,5 +18,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode diff --git a/keyboards/handwired/aranck/rules.mk b/keyboards/handwired/aranck/rules.mk index 5b51e22b04..b2bae00b22 100644 --- a/keyboards/handwired/aranck/rules.mk +++ b/keyboards/handwired/aranck/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = yes # Audio output on port C6 +AUDIO_ENABLE = yes # Audio output LAYOUTS = planck_mit diff --git a/keyboards/handwired/arrow_pad/rules.mk b/keyboards/handwired/arrow_pad/rules.mk index cccd24c948..13f7fc68d0 100644 --- a/keyboards/handwired/arrow_pad/rules.mk +++ b/keyboards/handwired/arrow_pad/rules.mk @@ -19,4 +19,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/atreus50/rules.mk b/keyboards/handwired/atreus50/rules.mk index 57c3629807..dd66d65f29 100644 --- a/keyboards/handwired/atreus50/rules.mk +++ b/keyboards/handwired/atreus50/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = no # Console for debug(+400) COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/handwired/bdn9_ble/rules.mk b/keyboards/handwired/bdn9_ble/rules.mk index c3518e6457..bee9f58dff 100644 --- a/keyboards/handwired/bdn9_ble/rules.mk +++ b/keyboards/handwired/bdn9_ble/rules.mk @@ -23,5 +23,5 @@ BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode BLUETOOTH = AdafruitBLE # Enable Bluetooth -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = no diff --git a/keyboards/handwired/brain/rules.mk b/keyboards/handwired/brain/rules.mk index d0568a7ad7..ee73d1507e 100644 --- a/keyboards/handwired/brain/rules.mk +++ b/keyboards/handwired/brain/rules.mk @@ -17,6 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD = yes diff --git a/keyboards/handwired/cans12er/rules.mk b/keyboards/handwired/cans12er/rules.mk index c2b4479946..d32194b97f 100644 --- a/keyboards/handwired/cans12er/rules.mk +++ b/keyboards/handwired/cans12er/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/cmd60/rules.mk b/keyboards/handwired/cmd60/rules.mk index 444eac251d..c0d8645519 100644 --- a/keyboards/handwired/cmd60/rules.mk +++ b/keyboards/handwired/cmd60/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/co60/rev1/rules.mk b/keyboards/handwired/co60/rev1/rules.mk index d4e739af50..b19481887f 100644 --- a/keyboards/handwired/co60/rev1/rules.mk +++ b/keyboards/handwired/co60/rev1/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LEADER_ENABLE = yes # Turn on leader support # Layouts supported by this PCB: diff --git a/keyboards/handwired/colorlice/rules.mk b/keyboards/handwired/colorlice/rules.mk index 794e3c7911..3b7e9b904d 100644 --- a/keyboards/handwired/colorlice/rules.mk +++ b/keyboards/handwired/colorlice/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LTO_ENABLE = yes # Use link time optimization RGB_MATRIX_ENABLE = yes RGB_MATRIX_DRIVER = WS2812 diff --git a/keyboards/handwired/dactyl_left/rules.mk b/keyboards/handwired/dactyl_left/rules.mk index 60c841a917..c7eb1ef6b0 100644 --- a/keyboards/handwired/dactyl_left/rules.mk +++ b/keyboards/handwired/dactyl_left/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/dactyl_promicro/rules.mk b/keyboards/handwired/dactyl_promicro/rules.mk index 837bb31645..7f8abd590c 100644 --- a/keyboards/handwired/dactyl_promicro/rules.mk +++ b/keyboards/handwired/dactyl_promicro/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = no # Console for debug(+400) COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/handwired/daishi/rules.mk b/keyboards/handwired/daishi/rules.mk index fba2435d40..833d54778c 100644 --- a/keyboards/handwired/daishi/rules.mk +++ b/keyboards/handwired/daishi/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = yes # Console for debug(+400) COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/handwired/datahand/rules.mk b/keyboards/handwired/datahand/rules.mk index 9f8043db46..134d4dcf50 100644 --- a/keyboards/handwired/datahand/rules.mk +++ b/keyboards/handwired/datahand/rules.mk @@ -13,7 +13,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output CUSTOM_MATRIX = yes # We definitely have a nonstandard matrix # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/handwired/ddg_56/rules.mk b/keyboards/handwired/ddg_56/rules.mk index 17c7ee57b2..9263d0cba7 100644 --- a/keyboards/handwired/ddg_56/rules.mk +++ b/keyboards/handwired/ddg_56/rules.mk @@ -16,5 +16,5 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = yes # Audio output on port C6 +AUDIO_ENABLE = yes # Audio output UNICODE_ENABLE = no # Unicode diff --git a/keyboards/handwired/fc200rt_qmk/rules.mk b/keyboards/handwired/fc200rt_qmk/rules.mk index b154e5bb16..8f50a8b623 100644 --- a/keyboards/handwired/fc200rt_qmk/rules.mk +++ b/keyboards/handwired/fc200rt_qmk/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/fivethirteen/rules.mk b/keyboards/handwired/fivethirteen/rules.mk index 22c8ef52a4..3fe223e9b8 100644 --- a/keyboards/handwired/fivethirteen/rules.mk +++ b/keyboards/handwired/fivethirteen/rules.mk @@ -18,5 +18,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/floorboard/rules.mk b/keyboards/handwired/floorboard/rules.mk index b427c20229..8892d2239f 100644 --- a/keyboards/handwired/floorboard/rules.mk +++ b/keyboards/handwired/floorboard/rules.mk @@ -19,6 +19,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_4x12 diff --git a/keyboards/handwired/frenchdev/rules.mk b/keyboards/handwired/frenchdev/rules.mk index d2494b8353..8108956c34 100644 --- a/keyboards/handwired/frenchdev/rules.mk +++ b/keyboards/handwired/frenchdev/rules.mk @@ -18,7 +18,7 @@ NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: htt UNICODE_ENABLE = yes # Unicode BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = no # project specific files diff --git a/keyboards/handwired/fruity60/rules.mk b/keyboards/handwired/fruity60/rules.mk index 1dfc9007ab..6fa9de6022 100644 --- a/keyboards/handwired/fruity60/rules.mk +++ b/keyboards/handwired/fruity60/rules.mk @@ -23,7 +23,7 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output BLUETOOTH = AdafruitBLE LAYOUTS = 60_tsangan_hhkb diff --git a/keyboards/handwired/gamenum/rules.mk b/keyboards/handwired/gamenum/rules.mk index c2487a975b..74a0446a4c 100644 --- a/keyboards/handwired/gamenum/rules.mk +++ b/keyboards/handwired/gamenum/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/hacked_motospeed/rules.mk b/keyboards/handwired/hacked_motospeed/rules.mk index e948879959..83a3a67b12 100644 --- a/keyboards/handwired/hacked_motospeed/rules.mk +++ b/keyboards/handwired/hacked_motospeed/rules.mk @@ -20,6 +20,6 @@ BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output NO_USB_STARTUP_CHECK = yes # Disable initialization only when usb is plugged in BLUETOOTH = RN42 diff --git a/keyboards/handwired/heisenberg/rules.mk b/keyboards/handwired/heisenberg/rules.mk index c82ddefd5a..f84fa81638 100644 --- a/keyboards/handwired/heisenberg/rules.mk +++ b/keyboards/handwired/heisenberg/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = yes # Audio output on port C6 +AUDIO_ENABLE = yes # Audio output LAYOUTS = planck_mit diff --git a/keyboards/handwired/hnah40/rules.mk b/keyboards/handwired/hnah40/rules.mk index 3184452049..0d17d5e8f1 100644 --- a/keyboards/handwired/hnah40/rules.mk +++ b/keyboards/handwired/hnah40/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/hnah40rgb/rules.mk b/keyboards/handwired/hnah40rgb/rules.mk index 5782f75e7f..f85644fb17 100644 --- a/keyboards/handwired/hnah40rgb/rules.mk +++ b/keyboards/handwired/hnah40rgb/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGB_MATRIX_ENABLE = yes RGB_MATRIX_DRIVER = WS2812 diff --git a/keyboards/handwired/ibm122m/rules.mk b/keyboards/handwired/ibm122m/rules.mk index 603dde425a..cc47555394 100644 --- a/keyboards/handwired/ibm122m/rules.mk +++ b/keyboards/handwired/ibm122m/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = yes # Audio output on port C6 +AUDIO_ENABLE = yes # Audio output diff --git a/keyboards/handwired/jn68m/rules.mk b/keyboards/handwired/jn68m/rules.mk index 3cff26462d..fe3f85cc65 100644 --- a/keyboards/handwired/jn68m/rules.mk +++ b/keyboards/handwired/jn68m/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/jot50/rules.mk b/keyboards/handwired/jot50/rules.mk index 63871e594d..786a0f904d 100644 --- a/keyboards/handwired/jot50/rules.mk +++ b/keyboards/handwired/jot50/rules.mk @@ -16,7 +16,7 @@ CONSOLE_ENABLE = yes # Console for debug(+400) COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/handwired/jotanck/rules.mk b/keyboards/handwired/jotanck/rules.mk index 9d29553907..60a766e0a3 100644 --- a/keyboards/handwired/jotanck/rules.mk +++ b/keyboards/handwired/jotanck/rules.mk @@ -16,7 +16,7 @@ CONSOLE_ENABLE = yes # Console for debug(+400) COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/handwired/jotpad16/rules.mk b/keyboards/handwired/jotpad16/rules.mk index 526fa1d02d..38df52572f 100644 --- a/keyboards/handwired/jotpad16/rules.mk +++ b/keyboards/handwired/jotpad16/rules.mk @@ -16,7 +16,7 @@ CONSOLE_ENABLE = yes # Console for debug(+400) COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/handwired/jtallbean/split_65/rules.mk b/keyboards/handwired/jtallbean/split_65/rules.mk index 955fb77eb6..6832f7dc23 100644 --- a/keyboards/handwired/jtallbean/split_65/rules.mk +++ b/keyboards/handwired/jtallbean/split_65/rules.mk @@ -18,5 +18,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD = yes # Enable split keyboard support diff --git a/keyboards/handwired/juliet/rules.mk b/keyboards/handwired/juliet/rules.mk index 090cd11884..a42e238199 100644 --- a/keyboards/handwired/juliet/rules.mk +++ b/keyboards/handwired/juliet/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/kbod/keymaps/default/rules.mk b/keyboards/handwired/kbod/keymaps/default/rules.mk index ad263f6e34..3b1956f7fd 100644 --- a/keyboards/handwired/kbod/keymaps/default/rules.mk +++ b/keyboards/handwired/kbod/keymaps/default/rules.mk @@ -10,7 +10,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/handwired/kbod/rules.mk b/keyboards/handwired/kbod/rules.mk index b9aab62bd4..c3b1ab8dba 100644 --- a/keyboards/handwired/kbod/rules.mk +++ b/keyboards/handwired/kbod/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/lovelive9/rules.mk b/keyboards/handwired/lovelive9/rules.mk index 2e75a7909b..58817921b1 100644 --- a/keyboards/handwired/lovelive9/rules.mk +++ b/keyboards/handwired/lovelive9/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = no # Console for debug(+400) COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. diff --git a/keyboards/handwired/magicforce61/rules.mk b/keyboards/handwired/magicforce61/rules.mk index 48580fde2d..87e2ff948d 100644 --- a/keyboards/handwired/magicforce61/rules.mk +++ b/keyboards/handwired/magicforce61/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/magicforce68/rules.mk b/keyboards/handwired/magicforce68/rules.mk index c2487a975b..74a0446a4c 100644 --- a/keyboards/handwired/magicforce68/rules.mk +++ b/keyboards/handwired/magicforce68/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/mechboards_micropad/rules.mk b/keyboards/handwired/mechboards_micropad/rules.mk index ba811423eb..ece2e4a2f7 100644 --- a/keyboards/handwired/mechboards_micropad/rules.mk +++ b/keyboards/handwired/mechboards_micropad/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/minorca/rules.mk b/keyboards/handwired/minorca/rules.mk index 16e2111108..a159fcb2da 100644 --- a/keyboards/handwired/minorca/rules.mk +++ b/keyboards/handwired/minorca/rules.mk @@ -18,5 +18,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode diff --git a/keyboards/handwired/ms_sculpt_mobile/keymaps/default/rules.mk b/keyboards/handwired/ms_sculpt_mobile/keymaps/default/rules.mk index 48257ecc20..ad5ce547d8 100644 --- a/keyboards/handwired/ms_sculpt_mobile/keymaps/default/rules.mk +++ b/keyboards/handwired/ms_sculpt_mobile/keymaps/default/rules.mk @@ -10,7 +10,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/handwired/ms_sculpt_mobile/rules.mk b/keyboards/handwired/ms_sculpt_mobile/rules.mk index 4071fb53bf..c672146ab1 100644 --- a/keyboards/handwired/ms_sculpt_mobile/rules.mk +++ b/keyboards/handwired/ms_sculpt_mobile/rules.mk @@ -23,7 +23,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output # Project specific files SRC = babblePaste.c diff --git a/keyboards/handwired/myskeeb/rules.mk b/keyboards/handwired/myskeeb/rules.mk index 8634c862f2..893d364263 100644 --- a/keyboards/handwired/myskeeb/rules.mk +++ b/keyboards/handwired/myskeeb/rules.mk @@ -17,7 +17,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode SPLIT_KEYBOARD = yes # Enables split keyboard support OLED_ENABLE = yes diff --git a/keyboards/handwired/not_so_minidox/rules.mk b/keyboards/handwired/not_so_minidox/rules.mk index 21893b08a1..8de56d204f 100644 --- a/keyboards/handwired/not_so_minidox/rules.mk +++ b/keyboards/handwired/not_so_minidox/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = no # Console for debug(+400) COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. USE_I2C = no diff --git a/keyboards/handwired/novem/rules.mk b/keyboards/handwired/novem/rules.mk index 14c97604bf..2c92dd919a 100644 --- a/keyboards/handwired/novem/rules.mk +++ b/keyboards/handwired/novem/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/numpad20/rules.mk b/keyboards/handwired/numpad20/rules.mk index 444eac251d..c0d8645519 100644 --- a/keyboards/handwired/numpad20/rules.mk +++ b/keyboards/handwired/numpad20/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/obuwunkunubi/spaget/rules.mk b/keyboards/handwired/obuwunkunubi/spaget/rules.mk index f95fdb80ff..ce2063a46d 100644 --- a/keyboards/handwired/obuwunkunubi/spaget/rules.mk +++ b/keyboards/handwired/obuwunkunubi/spaget/rules.mk @@ -18,7 +18,7 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no UNICODE_ENABLE = yes # Unicode SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output OLED_ENABLE = yes OLED_DRIVER = SSD1306 # Enable OLED display support diff --git a/keyboards/handwired/ortho5x13/rules.mk b/keyboards/handwired/ortho5x13/rules.mk index 444eac251d..c0d8645519 100644 --- a/keyboards/handwired/ortho5x13/rules.mk +++ b/keyboards/handwired/ortho5x13/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/owlet60/rules.mk b/keyboards/handwired/owlet60/rules.mk index 009dd34504..13e4e2af7e 100644 --- a/keyboards/handwired/owlet60/rules.mk +++ b/keyboards/handwired/owlet60/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output CUSTOM_MATRIX = yes OLED_ENABLE = no diff --git a/keyboards/handwired/p65rgb/rules.mk b/keyboards/handwired/p65rgb/rules.mk index 2a631ca65d..7531a0b83d 100644 --- a/keyboards/handwired/p65rgb/rules.mk +++ b/keyboards/handwired/p65rgb/rules.mk @@ -20,5 +20,5 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGB_MATRIX_ENABLE = yes RGB_MATRIX_DRIVER = WS2812 -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LTO_ENABLE = yes diff --git a/keyboards/handwired/pilcrow/keymaps/default/rules.mk b/keyboards/handwired/pilcrow/keymaps/default/rules.mk index 48257ecc20..ad5ce547d8 100644 --- a/keyboards/handwired/pilcrow/keymaps/default/rules.mk +++ b/keyboards/handwired/pilcrow/keymaps/default/rules.mk @@ -10,7 +10,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/handwired/pilcrow/rules.mk b/keyboards/handwired/pilcrow/rules.mk index 444eac251d..c0d8645519 100644 --- a/keyboards/handwired/pilcrow/rules.mk +++ b/keyboards/handwired/pilcrow/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/postageboard/mini/rules.mk b/keyboards/handwired/postageboard/mini/rules.mk index ad10f8f7b8..fcd3ad04ce 100644 --- a/keyboards/handwired/postageboard/mini/rules.mk +++ b/keyboards/handwired/postageboard/mini/rules.mk @@ -15,4 +15,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/postageboard/r1/rules.mk b/keyboards/handwired/postageboard/r1/rules.mk index ad10f8f7b8..fcd3ad04ce 100644 --- a/keyboards/handwired/postageboard/r1/rules.mk +++ b/keyboards/handwired/postageboard/r1/rules.mk @@ -15,4 +15,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/prime_exl/rules.mk b/keyboards/handwired/prime_exl/rules.mk index 25df7cfe03..1bcd67c084 100644 --- a/keyboards/handwired/prime_exl/rules.mk +++ b/keyboards/handwired/prime_exl/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/prime_exl_plus/rules.mk b/keyboards/handwired/prime_exl_plus/rules.mk index 805b5d0932..f671a2d2ce 100644 --- a/keyboards/handwired/prime_exl_plus/rules.mk +++ b/keyboards/handwired/prime_exl_plus/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/promethium/keymaps/default/rules.mk b/keyboards/handwired/promethium/keymaps/default/rules.mk index 4fd9b656b6..8fea2fd136 100644 --- a/keyboards/handwired/promethium/keymaps/default/rules.mk +++ b/keyboards/handwired/promethium/keymaps/default/rules.mk @@ -12,7 +12,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode UNICODEMAP_ENABLE = yes BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID diff --git a/keyboards/handwired/promethium/rules.mk b/keyboards/handwired/promethium/rules.mk index 960d637819..b29e387f63 100644 --- a/keyboards/handwired/promethium/rules.mk +++ b/keyboards/handwired/promethium/rules.mk @@ -18,7 +18,7 @@ CONSOLE_ENABLE = no # Console for debug(+400) COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode UNICODEMAP_ENABLE = yes BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID diff --git a/keyboards/handwired/qc60/rules.mk b/keyboards/handwired/qc60/rules.mk index 39861bb5de..916eecf15e 100644 --- a/keyboards/handwired/qc60/rules.mk +++ b/keyboards/handwired/qc60/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = no # Console for debug(+400) COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/handwired/reddot/rules.mk b/keyboards/handwired/reddot/rules.mk index b9aab62bd4..c3b1ab8dba 100755 --- a/keyboards/handwired/reddot/rules.mk +++ b/keyboards/handwired/reddot/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/sick68/rules.mk b/keyboards/handwired/sick68/rules.mk index 59d9b0c7c6..e027fabcd4 100644 --- a/keyboards/handwired/sick68/rules.mk +++ b/keyboards/handwired/sick68/rules.mk @@ -18,6 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = 65_ansi diff --git a/keyboards/handwired/slash/rules.mk b/keyboards/handwired/slash/rules.mk index e2e8c93e30..a896e98d88 100644 --- a/keyboards/handwired/slash/rules.mk +++ b/keyboards/handwired/slash/rules.mk @@ -24,4 +24,4 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode #BLUETOOTH_ENABLE = Yes # Enable Bluetooth with the Adafruit EZ-Key HID BLUETOOTH = AdafruitBLE -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/splittest/rules.mk b/keyboards/handwired/splittest/rules.mk index 8ecbbb6e28..880c45cf9c 100644 --- a/keyboards/handwired/splittest/rules.mk +++ b/keyboards/handwired/splittest/rules.mk @@ -9,7 +9,7 @@ CONSOLE_ENABLE = no # Console for debug(+400) COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. diff --git a/keyboards/handwired/sticc14/rules.mk b/keyboards/handwired/sticc14/rules.mk index ddebee437e..0099557cbe 100644 --- a/keyboards/handwired/sticc14/rules.mk +++ b/keyboards/handwired/sticc14/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/symmetry60/rules.mk b/keyboards/handwired/symmetry60/rules.mk index 8dee0455fd..4f17a2a914 100644 --- a/keyboards/handwired/symmetry60/rules.mk +++ b/keyboards/handwired/symmetry60/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LTO_ENABLE = yes # Use link time optimization LAYOUTS = ortho_5x14 diff --git a/keyboards/handwired/tennie/rules.mk b/keyboards/handwired/tennie/rules.mk index 86e7ffdc66..8b8b3d3f0b 100644 --- a/keyboards/handwired/tennie/rules.mk +++ b/keyboards/handwired/tennie/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/terminus_mini/keymaps/default/rules.mk b/keyboards/handwired/terminus_mini/keymaps/default/rules.mk index 0be6fcc266..60fe32dc84 100644 --- a/keyboards/handwired/terminus_mini/keymaps/default/rules.mk +++ b/keyboards/handwired/terminus_mini/keymaps/default/rules.mk @@ -10,7 +10,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/handwired/terminus_mini/rules.mk b/keyboards/handwired/terminus_mini/rules.mk index a1b1dda7a3..73e43c5ce8 100644 --- a/keyboards/handwired/terminus_mini/rules.mk +++ b/keyboards/handwired/terminus_mini/rules.mk @@ -15,7 +15,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/handwired/trackpoint/rules.mk b/keyboards/handwired/trackpoint/rules.mk index cd3d523c98..130a46440c 100644 --- a/keyboards/handwired/trackpoint/rules.mk +++ b/keyboards/handwired/trackpoint/rules.mk @@ -14,7 +14,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output PS2_MOUSE_ENABLE = yes PS2_USE_USART = yes diff --git a/keyboards/handwired/twadlee/tp69/rules.mk b/keyboards/handwired/twadlee/tp69/rules.mk index cf0a5775cd..6264af6a8b 100644 --- a/keyboards/handwired/twadlee/tp69/rules.mk +++ b/keyboards/handwired/twadlee/tp69/rules.mk @@ -15,7 +15,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output PS2_MOUSE_ENABLE = no USE_CHIBIOS_CONTRIB = yes diff --git a/keyboards/handwired/videowriter/rules.mk b/keyboards/handwired/videowriter/rules.mk index 5097f60c24..3e8ae9050c 100644 --- a/keyboards/handwired/videowriter/rules.mk +++ b/keyboards/handwired/videowriter/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/xealous/rules.mk b/keyboards/handwired/xealous/rules.mk index 759aeb5d91..f572bf4c95 100644 --- a/keyboards/handwired/xealous/rules.mk +++ b/keyboards/handwired/xealous/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = yes # Console for debug(+400) COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = yes # Audio output on port C6 +AUDIO_ENABLE = yes # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SPLIT_KEYBOARD = yes # Use shared split_common code diff --git a/keyboards/hecomi/alpha/rules.mk b/keyboards/hecomi/alpha/rules.mk index 679ea9fee1..4b4516b8e3 100644 --- a/keyboards/hecomi/alpha/rules.mk +++ b/keyboards/hecomi/alpha/rules.mk @@ -19,5 +19,5 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD = yes diff --git a/keyboards/hecomi/rules.mk b/keyboards/hecomi/rules.mk index 6b29a58bdb..ed3af5ddbb 100644 --- a/keyboards/hecomi/rules.mk +++ b/keyboards/hecomi/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD = yes DEFAULT_FOLDER = hecomi/alpha diff --git a/keyboards/heliar/wm1_hotswap/rules.mk b/keyboards/heliar/wm1_hotswap/rules.mk index 68435b7846..81b1de1f83 100644 --- a/keyboards/heliar/wm1_hotswap/rules.mk +++ b/keyboards/heliar/wm1_hotswap/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/helix/pico/keymaps/default/rules.mk b/keyboards/helix/pico/keymaps/default/rules.mk index 8f198e3803..fcf92e6717 100644 --- a/keyboards/helix/pico/keymaps/default/rules.mk +++ b/keyboards/helix/pico/keymaps/default/rules.mk @@ -6,7 +6,7 @@ # See TOP/docs/config_options.md for more information. # EXTRAKEY_ENABLE = yes # Audio control and System control -AUDIO_ENABLE = yes # Audio output on port B5 +AUDIO_ENABLE = yes # Audio output LTO_ENABLE = no # if firmware size over limit, try this option # Helix Spacific Build Options diff --git a/keyboards/helix/pico/qmk_conf/rules.mk b/keyboards/helix/pico/qmk_conf/rules.mk index 966e64d618..e2993b3f80 100644 --- a/keyboards/helix/pico/qmk_conf/rules.mk +++ b/keyboards/helix/pico/qmk_conf/rules.mk @@ -1,4 +1,4 @@ EXTRAKEY_ENABLE = yes # Audio control and System control -AUDIO_ENABLE = yes # Audio output on port B5 +AUDIO_ENABLE = yes # Audio output include $(strip $(KEYBOARD_LOCAL_FEATURES_MK)) diff --git a/keyboards/helix/rules.mk b/keyboards/helix/rules.mk index 916261383d..2e13e452a3 100644 --- a/keyboards/helix/rules.mk +++ b/keyboards/helix/rules.mk @@ -17,7 +17,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/hid_liber/rules.mk b/keyboards/hid_liber/rules.mk index 45cdd74dd9..6e906dec7f 100755 --- a/keyboards/hid_liber/rules.mk +++ b/keyboards/hid_liber/rules.mk @@ -20,7 +20,7 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output # Project specific files SRC = matrix.c diff --git a/keyboards/hifumi/rules.mk b/keyboards/hifumi/rules.mk index 6e4f003d42..2f0599c46a 100644 --- a/keyboards/hifumi/rules.mk +++ b/keyboards/hifumi/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. SWAP_HANDS_ENABLE = no # Enable one-hand typing diff --git a/keyboards/hineybush/h75_singa/rules.mk b/keyboards/hineybush/h75_singa/rules.mk index 17f4c8bb26..cc13d0c39b 100644 --- a/keyboards/hineybush/h75_singa/rules.mk +++ b/keyboards/hineybush/h75_singa/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/hineybush/h87a/rules.mk b/keyboards/hineybush/h87a/rules.mk index 470de355bf..654426fae1 100644 --- a/keyboards/hineybush/h87a/rules.mk +++ b/keyboards/hineybush/h87a/rules.mk @@ -19,5 +19,5 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output EXTRAFLAGS += -flto diff --git a/keyboards/hineybush/h88/rules.mk b/keyboards/hineybush/h88/rules.mk index 121ec8a17f..466e1697d2 100644 --- a/keyboards/hineybush/h88/rules.mk +++ b/keyboards/hineybush/h88/rules.mk @@ -19,5 +19,5 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LTO_ENABLE = yes diff --git a/keyboards/hineybush/hbcp/rules.mk b/keyboards/hineybush/hbcp/rules.mk index ee13992dee..acedb2a55e 100644 --- a/keyboards/hineybush/hbcp/rules.mk +++ b/keyboards/hineybush/hbcp/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output CUSTOM_MATRIX = lite SRC += matrix.c diff --git a/keyboards/hineybush/hineyg80/rules.mk b/keyboards/hineybush/hineyg80/rules.mk index b60ea846ca..92e108d29d 100644 --- a/keyboards/hineybush/hineyg80/rules.mk +++ b/keyboards/hineybush/hineyg80/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/hineybush/physix/rules.mk b/keyboards/hineybush/physix/rules.mk index 9c8bb1fd7b..fb97faa5f0 100644 --- a/keyboards/hineybush/physix/rules.mk +++ b/keyboards/hineybush/physix/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/hineybush/sm68/rules.mk b/keyboards/hineybush/sm68/rules.mk index dd80f6a2fc..1417fbe14a 100644 --- a/keyboards/hineybush/sm68/rules.mk +++ b/keyboards/hineybush/sm68/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/hs60/v1/rules.mk b/keyboards/hs60/v1/rules.mk index 83ee45069d..4948e082d7 100644 --- a/keyboards/hs60/v1/rules.mk +++ b/keyboards/hs60/v1/rules.mk @@ -23,7 +23,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGB_MATRIX_ENABLE = yes # Use RGB matrix RGB_MATRIX_DRIVER = IS31FL3731 RAW_ENABLE = yes diff --git a/keyboards/hs60/v2/ansi/rules.mk b/keyboards/hs60/v2/ansi/rules.mk index 4ec0d8ef33..d0b7d2df4c 100644 --- a/keyboards/hs60/v2/ansi/rules.mk +++ b/keyboards/hs60/v2/ansi/rules.mk @@ -21,7 +21,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in CIE1931_CURVE = yes diff --git a/keyboards/hs60/v2/hhkb/rules.mk b/keyboards/hs60/v2/hhkb/rules.mk index da021bdfaa..ea83aa454e 100644 --- a/keyboards/hs60/v2/hhkb/rules.mk +++ b/keyboards/hs60/v2/hhkb/rules.mk @@ -21,7 +21,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in CIE1931_CURVE = yes diff --git a/keyboards/hs60/v2/iso/rules.mk b/keyboards/hs60/v2/iso/rules.mk index 50c50b3aa3..a25ff59a8b 100644 --- a/keyboards/hs60/v2/iso/rules.mk +++ b/keyboards/hs60/v2/iso/rules.mk @@ -21,7 +21,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in CIE1931_CURVE = yes diff --git a/keyboards/id80/rules.mk b/keyboards/id80/rules.mk index d92bcb0697..1879ae25eb 100644 --- a/keyboards/id80/rules.mk +++ b/keyboards/id80/rules.mk @@ -22,7 +22,7 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output # partially generated by KBFirmware JSON to QMK Parser # https://noroadsleft.github.io/kbf_qmk_converter/ diff --git a/keyboards/idobo/rules.mk b/keyboards/idobo/rules.mk index d7c6082db2..272dc4b98e 100644 --- a/keyboards/idobo/rules.mk +++ b/keyboards/idobo/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output EXTRAFLAGS += -flto # Use link time optimization LAYOUTS = ortho_5x15 diff --git a/keyboards/illuminati/is0/rules.mk b/keyboards/illuminati/is0/rules.mk index 922861614a..8eee2ba5df 100644 --- a/keyboards/illuminati/is0/rules.mk +++ b/keyboards/illuminati/is0/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/ivy/rules.mk b/keyboards/ivy/rules.mk index 60861ccd62..b17cb9bb00 100644 --- a/keyboards/ivy/rules.mk +++ b/keyboards/ivy/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/jae/j01/rules.mk b/keyboards/jae/j01/rules.mk index 870afa0c2a..6785f2fb50 100644 --- a/keyboards/jae/j01/rules.mk +++ b/keyboards/jae/j01/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/jc65/v32u4/rules.mk b/keyboards/jc65/v32u4/rules.mk index 712e3bae7f..a9a4c89ff3 100644 --- a/keyboards/jc65/v32u4/rules.mk +++ b/keyboards/jc65/v32u4/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/jisplit89/rules.mk b/keyboards/jisplit89/rules.mk index e0f6bcd0fa..858b1c4c70 100644 --- a/keyboards/jisplit89/rules.mk +++ b/keyboards/jisplit89/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode SPLIT_KEYBOARD = yes diff --git a/keyboards/jnao/rules.mk b/keyboards/jnao/rules.mk index 0f354b6693..c802f5099e 100644 --- a/keyboards/jnao/rules.mk +++ b/keyboards/jnao/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_5x12 ortho_4x12 LAYOUTS_HAS_RGB = no diff --git a/keyboards/just60/rules.mk b/keyboards/just60/rules.mk index 97cb7f4d95..8b3d718089 100644 --- a/keyboards/just60/rules.mk +++ b/keyboards/just60/rules.mk @@ -21,4 +21,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/kagamidget/rules.mk b/keyboards/kagamidget/rules.mk index d8f22a60f1..da19c00ba1 100644 --- a/keyboards/kagamidget/rules.mk +++ b/keyboards/kagamidget/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes diff --git a/keyboards/kbdclack/kaishi65/rules.mk b/keyboards/kbdclack/kaishi65/rules.mk index a68ee37994..f319f383e6 100644 --- a/keyboards/kbdclack/kaishi65/rules.mk +++ b/keyboards/kbdclack/kaishi65/rules.mk @@ -18,6 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = 65_ansi diff --git a/keyboards/kbdfans/kbd19x/rules.mk b/keyboards/kbdfans/kbd19x/rules.mk index 3d11d880b4..4c9e6546d6 100644 --- a/keyboards/kbdfans/kbd19x/rules.mk +++ b/keyboards/kbdfans/kbd19x/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/kbdfans/kbd4x/rules.mk b/keyboards/kbdfans/kbd4x/rules.mk index c8e2651687..c956904bfe 100644 --- a/keyboards/kbdfans/kbd4x/rules.mk +++ b/keyboards/kbdfans/kbd4x/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_4x12 planck_mit diff --git a/keyboards/kbdfans/kbd66/rules.mk b/keyboards/kbdfans/kbd66/rules.mk index e8b3d09dc4..b69c09714e 100644 --- a/keyboards/kbdfans/kbd66/rules.mk +++ b/keyboards/kbdfans/kbd66/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/kbdfans/kbd67/hotswap/rules.mk b/keyboards/kbdfans/kbd67/hotswap/rules.mk index fd13accff5..1094747ada 100644 --- a/keyboards/kbdfans/kbd67/hotswap/rules.mk +++ b/keyboards/kbdfans/kbd67/hotswap/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = 65_ansi_blocker_split_bs diff --git a/keyboards/kbdfans/kbd67/mkii_soldered/rules.mk b/keyboards/kbdfans/kbd67/mkii_soldered/rules.mk index 205b307ace..450c9995a0 100644 --- a/keyboards/kbdfans/kbd67/mkii_soldered/rules.mk +++ b/keyboards/kbdfans/kbd67/mkii_soldered/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = 65_ansi_blocker 65_ansi_blocker_split_bs 65_iso_blocker 65_iso_blocker_split_bs diff --git a/keyboards/kbdfans/kbd67/mkiirgb/v2/rules.mk b/keyboards/kbdfans/kbd67/mkiirgb/v2/rules.mk index f4079e54f8..99fbca4d3e 100644 --- a/keyboards/kbdfans/kbd67/mkiirgb/v2/rules.mk +++ b/keyboards/kbdfans/kbd67/mkiirgb/v2/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGB_MATRIX_ENABLE = yes # Use RGB matrix RGB_MATRIX_DRIVER = IS31FL3731 NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in diff --git a/keyboards/kbdfans/kbd67/rev1/rules.mk b/keyboards/kbdfans/kbd67/rev1/rules.mk index 2befd98895..a5bac81349 100644 --- a/keyboards/kbdfans/kbd67/rev1/rules.mk +++ b/keyboards/kbdfans/kbd67/rev1/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = 65_ansi diff --git a/keyboards/kbdfans/kbd67/rev2/rules.mk b/keyboards/kbdfans/kbd67/rev2/rules.mk index 8692f5f4b9..242fcdc297 100644 --- a/keyboards/kbdfans/kbd67/rev2/rules.mk +++ b/keyboards/kbdfans/kbd67/rev2/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = 65_ansi 65_iso 65_ansi_blocker 65_ansi_blocker_split_bs 65_ansi_split_bs diff --git a/keyboards/kbdfans/kbd6x/rules.mk b/keyboards/kbdfans/kbd6x/rules.mk index 34ecec2094..f703b6f64b 100644 --- a/keyboards/kbdfans/kbd6x/rules.mk +++ b/keyboards/kbdfans/kbd6x/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/kbdfans/kbd8x_mk2/rules.mk b/keyboards/kbdfans/kbd8x_mk2/rules.mk index fa1f3e92d3..9a2a91f0a6 100644 --- a/keyboards/kbdfans/kbd8x_mk2/rules.mk +++ b/keyboards/kbdfans/kbd8x_mk2/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = tkl_ansi tkl_iso diff --git a/keyboards/kbdfans/kbdpad_mk2/rules.mk b/keyboards/kbdfans/kbdpad_mk2/rules.mk index 512f3b464d..959c706449 100644 --- a/keyboards/kbdfans/kbdpad_mk2/rules.mk +++ b/keyboards/kbdfans/kbdpad_mk2/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_6x4 diff --git a/keyboards/kbdfans/maja/rules.mk b/keyboards/kbdfans/maja/rules.mk index cec7356a86..db444a9183 100755 --- a/keyboards/kbdfans/maja/rules.mk +++ b/keyboards/kbdfans/maja/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGB_MATRIX_ENABLE = yes # Use RGB matrix RGB_MATRIX_DRIVER = IS31FL3731 NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in diff --git a/keyboards/kc60se/rules.mk b/keyboards/kc60se/rules.mk index c4b8c30626..d82a0a41bc 100644 --- a/keyboards/kc60se/rules.mk +++ b/keyboards/kc60se/rules.mk @@ -17,6 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_iso 60_iso_split_bs_rshift diff --git a/keyboards/keebio/bdn9/rev1/rules.mk b/keyboards/keebio/bdn9/rev1/rules.mk index a79c8978cc..6c249fbaf4 100644 --- a/keyboards/keebio/bdn9/rev1/rules.mk +++ b/keyboards/keebio/bdn9/rev1/rules.mk @@ -19,5 +19,5 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes diff --git a/keyboards/keebio/bdn9/rev2/rules.mk b/keyboards/keebio/bdn9/rev2/rules.mk index b147a4f8a0..f743e71be5 100644 --- a/keyboards/keebio/bdn9/rev2/rules.mk +++ b/keyboards/keebio/bdn9/rev2/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes RGB_MATRIX_ENABLE = yes RGB_MATRIX_DRIVER = WS2812 diff --git a/keyboards/keebio/bfo9000/rules.mk b/keyboards/keebio/bfo9000/rules.mk index 133e0a67cc..2c7fa1f6b9 100644 --- a/keyboards/keebio/bfo9000/rules.mk +++ b/keyboards/keebio/bfo9000/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/keebio/choconum/rules.mk b/keyboards/keebio/choconum/rules.mk index 1f0db9fa06..bedc563292 100644 --- a/keyboards/keebio/choconum/rules.mk +++ b/keyboards/keebio/choconum/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_5x4 numpad_5x4 diff --git a/keyboards/keebio/ergodicity/rules.mk b/keyboards/keebio/ergodicity/rules.mk index a152837458..42fb2f6b1d 100644 --- a/keyboards/keebio/ergodicity/rules.mk +++ b/keyboards/keebio/ergodicity/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/keebio/fourier/rules.mk b/keyboards/keebio/fourier/rules.mk index 23dc052544..414f735495 100644 --- a/keyboards/keebio/fourier/rules.mk +++ b/keyboards/keebio/fourier/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. diff --git a/keyboards/keebio/iris/rev1/rules.mk b/keyboards/keebio/iris/rev1/rules.mk index 6178f2fa1a..4bf3f2bf0d 100644 --- a/keyboards/keebio/iris/rev1/rules.mk +++ b/keyboards/keebio/iris/rev1/rules.mk @@ -16,7 +16,7 @@ CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/keebio/iris/rev1_led/rules.mk b/keyboards/keebio/iris/rev1_led/rules.mk index 6178f2fa1a..4bf3f2bf0d 100644 --- a/keyboards/keebio/iris/rev1_led/rules.mk +++ b/keyboards/keebio/iris/rev1_led/rules.mk @@ -16,7 +16,7 @@ CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/keebio/iris/rev2/rules.mk b/keyboards/keebio/iris/rev2/rules.mk index 7ab316bf0f..15373eed4c 100644 --- a/keyboards/keebio/iris/rev2/rules.mk +++ b/keyboards/keebio/iris/rev2/rules.mk @@ -16,7 +16,7 @@ CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/keebio/iris/rev3/rules.mk b/keyboards/keebio/iris/rev3/rules.mk index 110b8798a9..8d8dc05b30 100644 --- a/keyboards/keebio/iris/rev3/rules.mk +++ b/keyboards/keebio/iris/rev3/rules.mk @@ -16,7 +16,7 @@ CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/keebio/iris/rev4/rules.mk b/keyboards/keebio/iris/rev4/rules.mk index 19789b787b..52a2efe439 100644 --- a/keyboards/keebio/iris/rev4/rules.mk +++ b/keyboards/keebio/iris/rev4/rules.mk @@ -16,7 +16,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/keebio/kbo5000/rules.mk b/keyboards/keebio/kbo5000/rules.mk index 8ba41832bb..d2f263ac3e 100644 --- a/keyboards/keebio/kbo5000/rules.mk +++ b/keyboards/keebio/kbo5000/rules.mk @@ -14,7 +14,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/keebio/laplace/rules.mk b/keyboards/keebio/laplace/rules.mk index 2f026036a7..d19bbb8fa6 100644 --- a/keyboards/keebio/laplace/rules.mk +++ b/keyboards/keebio/laplace/rules.mk @@ -15,6 +15,6 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. diff --git a/keyboards/keebio/levinson/rules.mk b/keyboards/keebio/levinson/rules.mk index 7f8f95d803..e63c48bcfe 100644 --- a/keyboards/keebio/levinson/rules.mk +++ b/keyboards/keebio/levinson/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/keebio/nyquist/rev1/rules.mk b/keyboards/keebio/nyquist/rev1/rules.mk index 9627e3e624..d446cecadd 100644 --- a/keyboards/keebio/nyquist/rev1/rules.mk +++ b/keyboards/keebio/nyquist/rev1/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/keebio/nyquist/rev2/rules.mk b/keyboards/keebio/nyquist/rev2/rules.mk index a038deb703..5a626cc84a 100644 --- a/keyboards/keebio/nyquist/rev2/rules.mk +++ b/keyboards/keebio/nyquist/rev2/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/keebio/nyquist/rev3/rules.mk b/keyboards/keebio/nyquist/rev3/rules.mk index a26a9ff935..d0eae1163c 100644 --- a/keyboards/keebio/nyquist/rev3/rules.mk +++ b/keyboards/keebio/nyquist/rev3/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/keebio/quefrency/rules.mk b/keyboards/keebio/quefrency/rules.mk index 3256dbd021..e85432002e 100644 --- a/keyboards/keebio/quefrency/rules.mk +++ b/keyboards/keebio/quefrency/rules.mk @@ -8,7 +8,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/keebio/rorschach/rules.mk b/keyboards/keebio/rorschach/rules.mk index 2c59e6ea90..b21e1ba57b 100644 --- a/keyboards/keebio/rorschach/rules.mk +++ b/keyboards/keebio/rorschach/rules.mk @@ -11,7 +11,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/keebio/sinc/rules.mk b/keyboards/keebio/sinc/rules.mk index be1caa8dee..a9b4978964 100644 --- a/keyboards/keebio/sinc/rules.mk +++ b/keyboards/keebio/sinc/rules.mk @@ -14,7 +14,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/keebio/tragicforce68/rules.mk b/keyboards/keebio/tragicforce68/rules.mk index 4c90ff561c..d921e02702 100644 --- a/keyboards/keebio/tragicforce68/rules.mk +++ b/keyboards/keebio/tragicforce68/rules.mk @@ -18,6 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = 68_ansi diff --git a/keyboards/keebio/tukey/rules.mk b/keyboards/keebio/tukey/rules.mk index dac29ee075..0f53969e28 100644 --- a/keyboards/keebio/tukey/rules.mk +++ b/keyboards/keebio/tukey/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/keebio/viterbi/rules.mk b/keyboards/keebio/viterbi/rules.mk index 178bd3ac24..ba27d41538 100644 --- a/keyboards/keebio/viterbi/rules.mk +++ b/keyboards/keebio/viterbi/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/keebio/wavelet/rules.mk b/keyboards/keebio/wavelet/rules.mk index 25fe1b898b..1329df5d82 100644 --- a/keyboards/keebio/wavelet/rules.mk +++ b/keyboards/keebio/wavelet/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. diff --git a/keyboards/keebwerk/nano_slider/rules.mk b/keyboards/keebwerk/nano_slider/rules.mk index 58fba972ba..8b44675a5a 100644 --- a/keyboards/keebwerk/nano_slider/rules.mk +++ b/keyboards/keebwerk/nano_slider/rules.mk @@ -17,7 +17,7 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = yes # MIDI support -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LTO_ENABLE = yes SRC += analog.c diff --git a/keyboards/keyhive/maypad/rules.mk b/keyboards/keyhive/maypad/rules.mk index a58cdfd9d0..31107f07a4 100644 --- a/keyboards/keyhive/maypad/rules.mk +++ b/keyboards/keyhive/maypad/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_5x4 numpad_5x4 diff --git a/keyboards/kinesis/keymaps/default/rules.mk b/keyboards/kinesis/keymaps/default/rules.mk index 638f4ffe53..22af51a29e 100644 --- a/keyboards/kinesis/keymaps/default/rules.mk +++ b/keyboards/kinesis/keymaps/default/rules.mk @@ -10,7 +10,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/kinesis/keymaps/default_pretty/rules.mk b/keyboards/kinesis/keymaps/default_pretty/rules.mk index 638f4ffe53..22af51a29e 100644 --- a/keyboards/kinesis/keymaps/default_pretty/rules.mk +++ b/keyboards/kinesis/keymaps/default_pretty/rules.mk @@ -10,7 +10,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/kinesis/rules.mk b/keyboards/kinesis/rules.mk index 8cb9252630..94d6fb9f21 100644 --- a/keyboards/kinesis/rules.mk +++ b/keyboards/kinesis/rules.mk @@ -18,6 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output should be port E6, current quantum library hardcodes C6, which we use for programming +AUDIO_ENABLE = no # Audio output DEFAULT_FOLDER = kinesis/alvicstep diff --git a/keyboards/kingly_keys/romac_plus/rules.mk b/keyboards/kingly_keys/romac_plus/rules.mk index 84af235330..00c841dc9a 100644 --- a/keyboards/kingly_keys/romac_plus/rules.mk +++ b/keyboards/kingly_keys/romac_plus/rules.mk @@ -17,7 +17,7 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes # Enable support for EC11 Rotary Encoder OLED_ENABLE = yes OLED_DRIVER = SSD1306 # Enable Support for SSD1306 or SH1106 OLED Displays; Communicating over I2C diff --git a/keyboards/kingly_keys/ropro/rules.mk b/keyboards/kingly_keys/ropro/rules.mk index f8049f17d0..83ae063601 100644 --- a/keyboards/kingly_keys/ropro/rules.mk +++ b/keyboards/kingly_keys/ropro/rules.mk @@ -16,7 +16,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes RGBLIGHT_ENABLE = yes LAYOUTS_HAS_RGB = yes diff --git a/keyboards/kingly_keys/soap/rules.mk b/keyboards/kingly_keys/soap/rules.mk index 508a3d1f85..a6bda5608f 100644 --- a/keyboards/kingly_keys/soap/rules.mk +++ b/keyboards/kingly_keys/soap/rules.mk @@ -16,7 +16,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes RGBLIGHT_ENABLE = yes LAYOUTS_HAS_RGB = yes diff --git a/keyboards/kira75/rules.mk b/keyboards/kira75/rules.mk index b2792a2d5b..dff0c4b5ba 100644 --- a/keyboards/kira75/rules.mk +++ b/keyboards/kira75/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/kmac/rules.mk b/keyboards/kmac/rules.mk index f37a1c3124..ba15e1d37b 100644 --- a/keyboards/kmac/rules.mk +++ b/keyboards/kmac/rules.mk @@ -23,7 +23,7 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality BACKLIGHT_DRIVER = custom UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output # Project specific files SRC += matrix.c diff --git a/keyboards/kmini/rules.mk b/keyboards/kmini/rules.mk index 63e7a0acc7..0692b55f0c 100755 --- a/keyboards/kmini/rules.mk +++ b/keyboards/kmini/rules.mk @@ -22,7 +22,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output # Project specific files SRC = matrix.c diff --git a/keyboards/knops/mini/rules.mk b/keyboards/knops/mini/rules.mk index 4b7a4f724b..4b31085728 100644 --- a/keyboards/knops/mini/rules.mk +++ b/keyboards/knops/mini/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/kona_classic/keymaps/ansi/rules.mk b/keyboards/kona_classic/keymaps/ansi/rules.mk index f86bc8189e..3d342acc8f 100644 --- a/keyboards/kona_classic/keymaps/ansi/rules.mk +++ b/keyboards/kona_classic/keymaps/ansi/rules.mk @@ -26,7 +26,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI support -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/kona_classic/keymaps/ansi_arrows/rules.mk b/keyboards/kona_classic/keymaps/ansi_arrows/rules.mk index f86bc8189e..3d342acc8f 100644 --- a/keyboards/kona_classic/keymaps/ansi_arrows/rules.mk +++ b/keyboards/kona_classic/keymaps/ansi_arrows/rules.mk @@ -26,7 +26,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI support -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/kona_classic/keymaps/ansi_arrows_lcap/rules.mk b/keyboards/kona_classic/keymaps/ansi_arrows_lcap/rules.mk index f86bc8189e..3d342acc8f 100644 --- a/keyboards/kona_classic/keymaps/ansi_arrows_lcap/rules.mk +++ b/keyboards/kona_classic/keymaps/ansi_arrows_lcap/rules.mk @@ -26,7 +26,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI support -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/kona_classic/keymaps/ansi_split/rules.mk b/keyboards/kona_classic/keymaps/ansi_split/rules.mk index f86bc8189e..3d342acc8f 100644 --- a/keyboards/kona_classic/keymaps/ansi_split/rules.mk +++ b/keyboards/kona_classic/keymaps/ansi_split/rules.mk @@ -26,7 +26,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI support -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/kona_classic/keymaps/ansi_split_arrows/rules.mk b/keyboards/kona_classic/keymaps/ansi_split_arrows/rules.mk index f86bc8189e..3d342acc8f 100644 --- a/keyboards/kona_classic/keymaps/ansi_split_arrows/rules.mk +++ b/keyboards/kona_classic/keymaps/ansi_split_arrows/rules.mk @@ -26,7 +26,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI support -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/kona_classic/keymaps/default/rules.mk b/keyboards/kona_classic/keymaps/default/rules.mk index f86bc8189e..3d342acc8f 100644 --- a/keyboards/kona_classic/keymaps/default/rules.mk +++ b/keyboards/kona_classic/keymaps/default/rules.mk @@ -26,7 +26,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI support -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/kona_classic/keymaps/iso/rules.mk b/keyboards/kona_classic/keymaps/iso/rules.mk index f86bc8189e..3d342acc8f 100644 --- a/keyboards/kona_classic/keymaps/iso/rules.mk +++ b/keyboards/kona_classic/keymaps/iso/rules.mk @@ -26,7 +26,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI support -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/kona_classic/keymaps/iso_arrows/rules.mk b/keyboards/kona_classic/keymaps/iso_arrows/rules.mk index f86bc8189e..3d342acc8f 100644 --- a/keyboards/kona_classic/keymaps/iso_arrows/rules.mk +++ b/keyboards/kona_classic/keymaps/iso_arrows/rules.mk @@ -26,7 +26,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI support -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/kona_classic/keymaps/iso_split/rules.mk b/keyboards/kona_classic/keymaps/iso_split/rules.mk index f86bc8189e..3d342acc8f 100644 --- a/keyboards/kona_classic/keymaps/iso_split/rules.mk +++ b/keyboards/kona_classic/keymaps/iso_split/rules.mk @@ -26,7 +26,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI support -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/kona_classic/keymaps/iso_split_arrows/rules.mk b/keyboards/kona_classic/keymaps/iso_split_arrows/rules.mk index f86bc8189e..3d342acc8f 100644 --- a/keyboards/kona_classic/keymaps/iso_split_arrows/rules.mk +++ b/keyboards/kona_classic/keymaps/iso_split_arrows/rules.mk @@ -26,7 +26,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI support -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/kona_classic/rules.mk b/keyboards/kona_classic/rules.mk index 979a7a5097..fdb29e65c7 100644 --- a/keyboards/kona_classic/rules.mk +++ b/keyboards/kona_classic/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/kprepublic/bm16a/rules.mk b/keyboards/kprepublic/bm16a/rules.mk index 020b84e123..3379624f90 100644 --- a/keyboards/kprepublic/bm16a/rules.mk +++ b/keyboards/kprepublic/bm16a/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_4x4 diff --git a/keyboards/kprepublic/bm43a/rules.mk b/keyboards/kprepublic/bm43a/rules.mk index 39160e9865..86bb4c7592 100644 --- a/keyboards/kprepublic/bm43a/rules.mk +++ b/keyboards/kprepublic/bm43a/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/kprepublic/bm60rgb/rules.mk b/keyboards/kprepublic/bm60rgb/rules.mk index 2ab337dfac..ca52d16a44 100644 --- a/keyboards/kprepublic/bm60rgb/rules.mk +++ b/keyboards/kprepublic/bm60rgb/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGB_MATRIX_ENABLE = yes RGB_MATRIX_DRIVER = WS2812 LTO_ENABLE = yes diff --git a/keyboards/kprepublic/cospad/rules.mk b/keyboards/kprepublic/cospad/rules.mk index acff208e7d..211374d914 100644 --- a/keyboards/kprepublic/cospad/rules.mk +++ b/keyboards/kprepublic/cospad/rules.mk @@ -18,6 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = numpad_6x4 ortho_6x4 diff --git a/keyboards/kprepublic/jj40/rules.mk b/keyboards/kprepublic/jj40/rules.mk index 07f70976c9..6d4734ffb2 100644 --- a/keyboards/kprepublic/jj40/rules.mk +++ b/keyboards/kprepublic/jj40/rules.mk @@ -20,7 +20,7 @@ BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow WS2812_DRIVER = i2c UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_4x12 planck_mit diff --git a/keyboards/kprepublic/jj4x4/rules.mk b/keyboards/kprepublic/jj4x4/rules.mk index 4eb85022ac..e68ab710b0 100644 --- a/keyboards/kprepublic/jj4x4/rules.mk +++ b/keyboards/kprepublic/jj4x4/rules.mk @@ -20,6 +20,6 @@ BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow WS2812_DRIVER = i2c UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_4x4 diff --git a/keyboards/ktec/daisy/rules.mk b/keyboards/ktec/daisy/rules.mk index db91b66973..f459626422 100644 --- a/keyboards/ktec/daisy/rules.mk +++ b/keyboards/ktec/daisy/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/ktec/staryu/rules.mk b/keyboards/ktec/staryu/rules.mk index 8c8c25d803..b7c947b4f3 100755 --- a/keyboards/ktec/staryu/rules.mk +++ b/keyboards/ktec/staryu/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/kudox/rules.mk b/keyboards/kudox/rules.mk index 07ab13e0e7..a257aedd76 100644 --- a/keyboards/kudox/rules.mk +++ b/keyboards/kudox/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. SPLIT_KEYBOARD = yes diff --git a/keyboards/kudox_game/rules.mk b/keyboards/kudox_game/rules.mk index d7171c9106..75920e83e1 100644 --- a/keyboards/kudox_game/rules.mk +++ b/keyboards/kudox_game/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. DEFAULT_FOLDER = kudox_game/rev2 diff --git a/keyboards/kv/revt/rules.mk b/keyboards/kv/revt/rules.mk index 8412060edd..3412337f50 100644 --- a/keyboards/kv/revt/rules.mk +++ b/keyboards/kv/revt/rules.mk @@ -19,4 +19,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/lattice60/rules.mk b/keyboards/lattice60/rules.mk index 78470fc796..069efe020e 100644 --- a/keyboards/lattice60/rules.mk +++ b/keyboards/lattice60/rules.mk @@ -21,6 +21,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = 60_hhkb diff --git a/keyboards/launchpad/rules.mk b/keyboards/launchpad/rules.mk index b12f8b8033..b040974fa3 100644 --- a/keyboards/launchpad/rules.mk +++ b/keyboards/launchpad/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/lazydesigners/the30/rules.mk b/keyboards/lazydesigners/the30/rules.mk index da61376b64..e62dfdcc51 100644 --- a/keyboards/lazydesigners/the30/rules.mk +++ b/keyboards/lazydesigners/the30/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output # Support community keymaps LAYOUTS = ortho_3x10 diff --git a/keyboards/lets_split/rules.mk b/keyboards/lets_split/rules.mk index adcfa19978..b8ba2a7ae7 100644 --- a/keyboards/lets_split/rules.mk +++ b/keyboards/lets_split/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/lets_split_eh/rules.mk b/keyboards/lets_split_eh/rules.mk index 4563fa0b8d..7b883bd487 100644 --- a/keyboards/lets_split_eh/rules.mk +++ b/keyboards/lets_split_eh/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/lfkeyboards/lfk78/rules.mk b/keyboards/lfkeyboards/lfk78/rules.mk index 475fadbb35..5711e89a68 100644 --- a/keyboards/lfkeyboards/lfk78/rules.mk +++ b/keyboards/lfkeyboards/lfk78/rules.mk @@ -12,7 +12,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality BACKLIGHT_DRIVER = custom -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lfkeyboards, not qmk base diff --git a/keyboards/lfkeyboards/lfk87/keymaps/default/rules.mk b/keyboards/lfkeyboards/lfk87/keymaps/default/rules.mk index bd998e4dd9..b914a58ee8 100644 --- a/keyboards/lfkeyboards/lfk87/keymaps/default/rules.mk +++ b/keyboards/lfkeyboards/lfk87/keymaps/default/rules.mk @@ -11,7 +11,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = yes # Audio output on port C6 +AUDIO_ENABLE = yes # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable RGB underlight RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lefkeyboards, not WS2812 diff --git a/keyboards/lfkeyboards/lfk87/keymaps/iso/rules.mk b/keyboards/lfkeyboards/lfk87/keymaps/iso/rules.mk index 2dd1cea984..db2b6c31a3 100644 --- a/keyboards/lfkeyboards/lfk87/keymaps/iso/rules.mk +++ b/keyboards/lfkeyboards/lfk87/keymaps/iso/rules.mk @@ -11,7 +11,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = yes # Audio output on port C6 +AUDIO_ENABLE = yes # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable RGB underlight RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lefkeyboards, not WS2812 diff --git a/keyboards/lfkeyboards/lfk87/rules.mk b/keyboards/lfkeyboards/lfk87/rules.mk index 340e3f8d62..44b8a4111a 100644 --- a/keyboards/lfkeyboards/lfk87/rules.mk +++ b/keyboards/lfkeyboards/lfk87/rules.mk @@ -32,7 +32,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality BACKLIGHT_DRIVER = custom -AUDIO_ENABLE = yes # Audio output on port C6 +AUDIO_ENABLE = yes # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable RGB underlight RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lefkeyboards, not WS2812 diff --git a/keyboards/lfkeyboards/lfkpad/rules.mk b/keyboards/lfkeyboards/lfkpad/rules.mk index 72587e3ec7..f166436c97 100644 --- a/keyboards/lfkeyboards/lfkpad/rules.mk +++ b/keyboards/lfkeyboards/lfkpad/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lfkeyboards, not qmk base -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode TAP_DANCE_ENABLE = no diff --git a/keyboards/lfkeyboards/mini1800/keymaps/default/rules.mk b/keyboards/lfkeyboards/mini1800/keymaps/default/rules.mk index 4f4c0f6ba3..b96ab7377c 100644 --- a/keyboards/lfkeyboards/mini1800/keymaps/default/rules.mk +++ b/keyboards/lfkeyboards/mini1800/keymaps/default/rules.mk @@ -11,7 +11,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = yes # Audio output on port C6 +AUDIO_ENABLE = yes # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable RGB underlight RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lefkeyboards, not WS2812 diff --git a/keyboards/lily58/keymaps/default/rules.mk b/keyboards/lily58/keymaps/default/rules.mk index c481671e7c..8ada44bfee 100644 --- a/keyboards/lily58/keymaps/default/rules.mk +++ b/keyboards/lily58/keymaps/default/rules.mk @@ -10,7 +10,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SWAP_HANDS_ENABLE = no # Enable one-hand typing diff --git a/keyboards/lily58/rules.mk b/keyboards/lily58/rules.mk index fa2faf6431..740bc79b53 100644 --- a/keyboards/lily58/rules.mk +++ b/keyboards/lily58/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/massdrop/alt/rules.mk b/keyboards/massdrop/alt/rules.mk index cf8987238c..e9014e3c0d 100644 --- a/keyboards/massdrop/alt/rules.mk +++ b/keyboards/massdrop/alt/rules.mk @@ -20,7 +20,7 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output VIRTSER_ENABLE = no # USB Serial Driver RAW_ENABLE = no # Raw device AUTO_SHIFT_ENABLE = no # Auto Shift diff --git a/keyboards/massdrop/ctrl/rules.mk b/keyboards/massdrop/ctrl/rules.mk index e69fd36174..eee9069706 100644 --- a/keyboards/massdrop/ctrl/rules.mk +++ b/keyboards/massdrop/ctrl/rules.mk @@ -20,7 +20,7 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output VIRTSER_ENABLE = no # USB Serial Driver RAW_ENABLE = no # Raw device AUTO_SHIFT_ENABLE = no # Auto Shift diff --git a/keyboards/maxipad/rules.mk b/keyboards/maxipad/rules.mk index 8fb271e62a..2376600f3c 100644 --- a/keyboards/maxipad/rules.mk +++ b/keyboards/maxipad/rules.mk @@ -13,6 +13,6 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output DEFAULT_FOLDER = maxipad/promicro diff --git a/keyboards/maxr1998/phoebe/rules.mk b/keyboards/maxr1998/phoebe/rules.mk index 2750b4f2cb..1a39a4aea4 100644 --- a/keyboards/maxr1998/phoebe/rules.mk +++ b/keyboards/maxr1998/phoebe/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration COMBO_ENABLE = no # Key combo feature NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. KEY_LOCK_ENABLE = yes diff --git a/keyboards/maxr1998/pulse4k/rules.mk b/keyboards/maxr1998/pulse4k/rules.mk index 79e3838f0d..2a937bec63 100644 --- a/keyboards/maxr1998/pulse4k/rules.mk +++ b/keyboards/maxr1998/pulse4k/rules.mk @@ -17,7 +17,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration COMBO_ENABLE = yes # Key combo feature NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/mc_76k/rules.mk b/keyboards/mc_76k/rules.mk index cb139cf21d..f2e5379ac1 100644 --- a/keyboards/mc_76k/rules.mk +++ b/keyboards/mc_76k/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/mechkeys/mk60/rules.mk b/keyboards/mechkeys/mk60/rules.mk index 15bb28a6e7..2e17d21130 100644 --- a/keyboards/mechkeys/mk60/rules.mk +++ b/keyboards/mechkeys/mk60/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/mechlovin/adelais/rules.mk b/keyboards/mechlovin/adelais/rules.mk index c1468e1090..a3531ff091 100644 --- a/keyboards/mechlovin/adelais/rules.mk +++ b/keyboards/mechlovin/adelais/rules.mk @@ -17,7 +17,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = alice alice_split_bs diff --git a/keyboards/mechlovin/hannah60rgb/rules.mk b/keyboards/mechlovin/hannah60rgb/rules.mk index 336e515ec5..c24be862ea 100644 --- a/keyboards/mechlovin/hannah60rgb/rules.mk +++ b/keyboards/mechlovin/hannah60rgb/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output # generated by KBFirmware JSON to QMK Parser # https://noroadsleft.github.io/kbf_qmk_converter/ diff --git a/keyboards/mechlovin/hannah910/rev1/rules.mk b/keyboards/mechlovin/hannah910/rev1/rules.mk index 0af7ae3633..07349c2f75 100644 --- a/keyboards/mechlovin/hannah910/rev1/rules.mk +++ b/keyboards/mechlovin/hannah910/rev1/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/mechlovin/infinityce/rules.mk b/keyboards/mechlovin/infinityce/rules.mk index 4e1228613d..81f481950a 100644 --- a/keyboards/mechlovin/infinityce/rules.mk +++ b/keyboards/mechlovin/infinityce/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/mechlovin/pisces/rules.mk b/keyboards/mechlovin/pisces/rules.mk index 4d57682e80..727a95d309 100644 --- a/keyboards/mechlovin/pisces/rules.mk +++ b/keyboards/mechlovin/pisces/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/meira/rules.mk b/keyboards/meira/rules.mk index d1eadc9921..0b8e55b57c 100644 --- a/keyboards/meira/rules.mk +++ b/keyboards/meira/rules.mk @@ -17,7 +17,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. BACKLIGHT_DRIVER = custom BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality, also set ISSI_ENABLE below for Miera diff --git a/keyboards/meishi/rules.mk b/keyboards/meishi/rules.mk index cce5b29222..ec207ad3ff 100644 --- a/keyboards/meishi/rules.mk +++ b/keyboards/meishi/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/meishi2/rules.mk b/keyboards/meishi2/rules.mk index 041dabc194..8fde4f64f1 100644 --- a/keyboards/meishi2/rules.mk +++ b/keyboards/meishi2/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/meme/rules.mk b/keyboards/meme/rules.mk index cf34e594dc..b22c8dd991 100644 --- a/keyboards/meme/rules.mk +++ b/keyboards/meme/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/meson/rules.mk b/keyboards/meson/rules.mk index cd82c5e954..de896f1973 100644 --- a/keyboards/meson/rules.mk +++ b/keyboards/meson/rules.mk @@ -20,4 +20,4 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/miller/gm862/rules.mk b/keyboards/miller/gm862/rules.mk index 3d6d2a3148..c4d5352324 100644 --- a/keyboards/miller/gm862/rules.mk +++ b/keyboards/miller/gm862/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGB_MATRIX_ENABLE = yes # Use RGB matrix RGB_MATRIX_DRIVER = IS31FL3733 NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in diff --git a/keyboards/miniaxe/rules.mk b/keyboards/miniaxe/rules.mk index bd38aa3376..03fc910d35 100644 --- a/keyboards/miniaxe/rules.mk +++ b/keyboards/miniaxe/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output DEBUG_ENABLE = no CUSTOM_MATRIX = no # Use custom matrix code diff --git a/keyboards/minidox/rules.mk b/keyboards/minidox/rules.mk index 7fa861beda..4865b19799 100644 --- a/keyboards/minidox/rules.mk +++ b/keyboards/minidox/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD = yes diff --git a/keyboards/mint60/rules.mk b/keyboards/mint60/rules.mk index 4feb5e4312..cc98a5dd9d 100644 --- a/keyboards/mint60/rules.mk +++ b/keyboards/mint60/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD = yes diff --git a/keyboards/miuni32/rules.mk b/keyboards/miuni32/rules.mk index ccffa363e6..a4b3bef7b1 100644 --- a/keyboards/miuni32/rules.mk +++ b/keyboards/miuni32/rules.mk @@ -18,5 +18,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes diff --git a/keyboards/montsinger/rebound/rev1/rules.mk b/keyboards/montsinger/rebound/rev1/rules.mk index 79988d79ac..605b89e357 100644 --- a/keyboards/montsinger/rebound/rev1/rules.mk +++ b/keyboards/montsinger/rebound/rev1/rules.mk @@ -15,7 +15,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_4x12 LAYOUTS_HAS_RGB = no diff --git a/keyboards/montsinger/rebound/rev2/rules.mk b/keyboards/montsinger/rebound/rev2/rules.mk index 332754b3a5..163a56eac2 100644 --- a/keyboards/montsinger/rebound/rev2/rules.mk +++ b/keyboards/montsinger/rebound/rev2/rules.mk @@ -15,7 +15,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes LAYOUTS = ortho_4x12 diff --git a/keyboards/montsinger/rebound/rev3/rules.mk b/keyboards/montsinger/rebound/rev3/rules.mk index 332754b3a5..163a56eac2 100644 --- a/keyboards/montsinger/rebound/rev3/rules.mk +++ b/keyboards/montsinger/rebound/rev3/rules.mk @@ -15,7 +15,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes LAYOUTS = ortho_4x12 diff --git a/keyboards/montsinger/rebound/rev4/rules.mk b/keyboards/montsinger/rebound/rev4/rules.mk index 30fe78416e..3d85724f51 100644 --- a/keyboards/montsinger/rebound/rev4/rules.mk +++ b/keyboards/montsinger/rebound/rev4/rules.mk @@ -15,7 +15,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes LAYOUTS = ortho_4x12 diff --git a/keyboards/montsinger/rewind/rules.mk b/keyboards/montsinger/rewind/rules.mk index b83a015cb5..ac5cb99ad2 100644 --- a/keyboards/montsinger/rewind/rules.mk +++ b/keyboards/montsinger/rewind/rules.mk @@ -15,4 +15,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/moon/rules.mk b/keyboards/moon/rules.mk index 599ce880a8..a7f830bdd2 100644 --- a/keyboards/moon/rules.mk +++ b/keyboards/moon/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output # custom matrix setup CUSTOM_MATRIX = yes diff --git a/keyboards/mountainblocks/mb17/rules.mk b/keyboards/mountainblocks/mb17/rules.mk index 92824ca43f..bd712c0982 100644 --- a/keyboards/mountainblocks/mb17/rules.mk +++ b/keyboards/mountainblocks/mb17/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/mt40/rules.mk b/keyboards/mt40/rules.mk index 64be72cd9b..61dc118cf9 100644 --- a/keyboards/mt40/rules.mk +++ b/keyboards/mt40/rules.mk @@ -12,7 +12,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ # nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. WS2812_DRIVER = i2c diff --git a/keyboards/murcielago/rev1/rules.mk b/keyboards/murcielago/rev1/rules.mk index c8f2e1efc5..2dcef560d9 100644 --- a/keyboards/murcielago/rev1/rules.mk +++ b/keyboards/murcielago/rev1/rules.mk @@ -18,6 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD = yes # Enable split keyboard mode ENCODER_ENABLE = yes diff --git a/keyboards/nafuda/rules.mk b/keyboards/nafuda/rules.mk index 6555cebeb2..b12f2e7df1 100644 --- a/keyboards/nafuda/rules.mk +++ b/keyboards/nafuda/rules.mk @@ -14,7 +14,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. TAP_DANCE_ENABLE = no diff --git a/keyboards/naked48/rules.mk b/keyboards/naked48/rules.mk index afb51ce253..df910fda57 100644 --- a/keyboards/naked48/rules.mk +++ b/keyboards/naked48/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. OLED_ENABLE = no diff --git a/keyboards/naked64/rules.mk b/keyboards/naked64/rules.mk index bc4e542440..baa7df308f 100644 --- a/keyboards/naked64/rules.mk +++ b/keyboards/naked64/rules.mk @@ -14,7 +14,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. TAP_DANCE_ENABLE = no diff --git a/keyboards/namecard2x4/rules.mk b/keyboards/namecard2x4/rules.mk index a0092c5c17..8cb73fc114 100644 --- a/keyboards/namecard2x4/rules.mk +++ b/keyboards/namecard2x4/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output #UNICODEMAP_ENABLE = yes # for emoji user #RGBLIGHT_ENABLE = yes # uncomment if you want addressable led strips diff --git a/keyboards/navi10/rev0/rules.mk b/keyboards/navi10/rev0/rules.mk index 9c707e3732..8901cf62f8 100644 --- a/keyboards/navi10/rev0/rules.mk +++ b/keyboards/navi10/rev0/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/navi10/rev2/rules.mk b/keyboards/navi10/rev2/rules.mk index 9c707e3732..8901cf62f8 100644 --- a/keyboards/navi10/rev2/rules.mk +++ b/keyboards/navi10/rev2/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/ncc1701kb/rules.mk b/keyboards/ncc1701kb/rules.mk index dc90e06663..19106badd5 100644 --- a/keyboards/ncc1701kb/rules.mk +++ b/keyboards/ncc1701kb/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = yes # Unicode TAP_DANCE_ENABLE = no ENCODER_ENABLE = yes \ No newline at end of file diff --git a/keyboards/nebula12/rules.mk b/keyboards/nebula12/rules.mk index 75dd7145d8..f336ee1a28 100755 --- a/keyboards/nebula12/rules.mk +++ b/keyboards/nebula12/rules.mk @@ -21,7 +21,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in RGBLIGHT_ENABLE = yes # Underglow RGB WS2812_DRIVER = spi # Underglow RGB Driver diff --git a/keyboards/nebula68/rules.mk b/keyboards/nebula68/rules.mk index 43ae287ec3..041753e86e 100755 --- a/keyboards/nebula68/rules.mk +++ b/keyboards/nebula68/rules.mk @@ -21,7 +21,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in RGBLIGHT_ENABLE = yes # Underglow RGB WS2812_DRIVER = pwm # Underglow RGB Driver diff --git a/keyboards/nek_type_a/rules.mk b/keyboards/nek_type_a/rules.mk index c32e25af05..91b2e32004 100644 --- a/keyboards/nek_type_a/rules.mk +++ b/keyboards/nek_type_a/rules.mk @@ -20,7 +20,7 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output CUSTOM_MATRIX = yes DEBUG_ENABLE = yes BLUETOOTH = AdafruitBLE diff --git a/keyboards/newgame40/rules.mk b/keyboards/newgame40/rules.mk index 299d7cedef..28039b7e57 100644 --- a/keyboards/newgame40/rules.mk +++ b/keyboards/newgame40/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = yes # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. IOS_DEVICE_ENABLE = no # connect to IOS Device diff --git a/keyboards/nightmare/rules.mk b/keyboards/nightmare/rules.mk index 39160e9865..86bb4c7592 100644 --- a/keyboards/nightmare/rules.mk +++ b/keyboards/nightmare/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/niu_mini/rules.mk b/keyboards/niu_mini/rules.mk index 042f175902..3a5ec5f68c 100644 --- a/keyboards/niu_mini/rules.mk +++ b/keyboards/niu_mini/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. diff --git a/keyboards/nk65/rules.mk b/keyboards/nk65/rules.mk index 07332019f3..56e222be1e 100755 --- a/keyboards/nk65/rules.mk +++ b/keyboards/nk65/rules.mk @@ -21,7 +21,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in CIE1931_CURVE = yes diff --git a/keyboards/noxary/220/rules.mk b/keyboards/noxary/220/rules.mk index ba3aeaa11d..1fd873d1da 100644 --- a/keyboards/noxary/220/rules.mk +++ b/keyboards/noxary/220/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_6x4 diff --git a/keyboards/noxary/260/rules.mk b/keyboards/noxary/260/rules.mk index 46f35764ba..0b59b05301 100644 --- a/keyboards/noxary/260/rules.mk +++ b/keyboards/noxary/260/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output EXTRAFLAGS += -flto LAYOUTS = 60_ansi 60_iso 60_hhkb 60_tsangan_hhkb diff --git a/keyboards/noxary/268/rules.mk b/keyboards/noxary/268/rules.mk index 38733d4f50..cb1e5c3e18 100644 --- a/keyboards/noxary/268/rules.mk +++ b/keyboards/noxary/268/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/noxary/268_2/rules.mk b/keyboards/noxary/268_2/rules.mk index 05b7ef648a..07364ca8b7 100644 --- a/keyboards/noxary/268_2/rules.mk +++ b/keyboards/noxary/268_2/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = 65_ansi_blocker diff --git a/keyboards/noxary/280/rules.mk b/keyboards/noxary/280/rules.mk index 38733d4f50..cb1e5c3e18 100644 --- a/keyboards/noxary/280/rules.mk +++ b/keyboards/noxary/280/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/noxary/x268/rules.mk b/keyboards/noxary/x268/rules.mk index 3d11d880b4..4c9e6546d6 100644 --- a/keyboards/noxary/x268/rules.mk +++ b/keyboards/noxary/x268/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/nullbitsco/nibble/rules.mk b/keyboards/nullbitsco/nibble/rules.mk index 4b56c5f46b..dd4d36c981 100644 --- a/keyboards/nullbitsco/nibble/rules.mk +++ b/keyboards/nullbitsco/nibble/rules.mk @@ -16,7 +16,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes # Use rotary encoder LTO_ENABLE = yes # Link-time optimization CUSTOM_MATRIX = lite # Lite custom matrix diff --git a/keyboards/oddball/rules.mk b/keyboards/oddball/rules.mk index 01235a1286..f1e7d48940 100644 --- a/keyboards/oddball/rules.mk +++ b/keyboards/oddball/rules.mk @@ -15,7 +15,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD = yes POINTING_DEVICE_ENABLE = yes diff --git a/keyboards/ogre/ergo_single/rules.mk b/keyboards/ogre/ergo_single/rules.mk index e50796a694..f550d3bc86 100644 --- a/keyboards/ogre/ergo_single/rules.mk +++ b/keyboards/ogre/ergo_single/rules.mk @@ -18,5 +18,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD = no diff --git a/keyboards/ogre/ergo_split/rules.mk b/keyboards/ogre/ergo_split/rules.mk index 436b4167ca..84f43da416 100644 --- a/keyboards/ogre/ergo_split/rules.mk +++ b/keyboards/ogre/ergo_split/rules.mk @@ -18,5 +18,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD = yes diff --git a/keyboards/org60/rules.mk b/keyboards/org60/rules.mk index 90e1afa899..e27e158ef2 100644 --- a/keyboards/org60/rules.mk +++ b/keyboards/org60/rules.mk @@ -5,7 +5,7 @@ MCU = atmega32u4 BOOTLOADER = atmel-dfu # Build Options -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite COMMAND_ENABLE = no # Commands for debug and configuration diff --git a/keyboards/ortho5by12/rules.mk b/keyboards/ortho5by12/rules.mk index 2cadec3ba0..645e99bec3 100644 --- a/keyboards/ortho5by12/rules.mk +++ b/keyboards/ortho5by12/rules.mk @@ -19,5 +19,5 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS_HAS_RGB = no diff --git a/keyboards/orthodox/rules.mk b/keyboards/orthodox/rules.mk index c3de637ae3..96fa8b33dc 100644 --- a/keyboards/orthodox/rules.mk +++ b/keyboards/orthodox/rules.mk @@ -12,7 +12,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/otaku_split/rev0/rules.mk b/keyboards/otaku_split/rev0/rules.mk index 3a8e495475..6f20c13a39 100644 --- a/keyboards/otaku_split/rev0/rules.mk +++ b/keyboards/otaku_split/rev0/rules.mk @@ -19,5 +19,5 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD=yes diff --git a/keyboards/otaku_split/rev1/rules.mk b/keyboards/otaku_split/rev1/rules.mk index 3a8e495475..6f20c13a39 100644 --- a/keyboards/otaku_split/rev1/rules.mk +++ b/keyboards/otaku_split/rev1/rules.mk @@ -19,5 +19,5 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD=yes diff --git a/keyboards/pabile/p18/rules.mk b/keyboards/pabile/p18/rules.mk index 790a1b46bc..bb36b4ebba 100644 --- a/keyboards/pabile/p18/rules.mk +++ b/keyboards/pabile/p18/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = yes # Unicode IOS_DEVICE_ENABLE = no # connect to IOS Device ENCODER_ENABLE = yes diff --git a/keyboards/pabile/p40/rules.mk b/keyboards/pabile/p40/rules.mk index 2b93730482..284a569d89 100644 --- a/keyboards/pabile/p40/rules.mk +++ b/keyboards/pabile/p40/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = yes # Unicode IOS_DEVICE_ENABLE = no # connect to IOS Device diff --git a/keyboards/palette1202/rules.mk b/keyboards/palette1202/rules.mk index bd26c2612c..c22854a29e 100644 --- a/keyboards/palette1202/rules.mk +++ b/keyboards/palette1202/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes # Enable support for rotary encoders OLED_ENABLE = yes OLED_DRIVER = SSD1306 # Enable support for OLED display diff --git a/keyboards/panc40/rules.mk b/keyboards/panc40/rules.mk index 8c027d4792..706a8ae201 100644 --- a/keyboards/panc40/rules.mk +++ b/keyboards/panc40/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/pdxkbc/rules.mk b/keyboards/pdxkbc/rules.mk index b60ea846ca..92e108d29d 100644 --- a/keyboards/pdxkbc/rules.mk +++ b/keyboards/pdxkbc/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/percent/booster/rules.mk b/keyboards/percent/booster/rules.mk index 6e2de19b43..cf1cd9cea6 100644 --- a/keyboards/percent/booster/rules.mk +++ b/keyboards/percent/booster/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output EXTRAFLAGS += -flto LAYOUTS = numpad_5x4 diff --git a/keyboards/pico/rules.mk b/keyboards/pico/rules.mk index 9cfa9d4572..7f6bb76c85 100644 --- a/keyboards/pico/rules.mk +++ b/keyboards/pico/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. SPLIT_KEYBOARD = yes diff --git a/keyboards/planck/light/rules.mk b/keyboards/planck/light/rules.mk index 34396a2c72..74705c452e 100644 --- a/keyboards/planck/light/rules.mk +++ b/keyboards/planck/light/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = yes # MIDI support -AUDIO_ENABLE = yes # Audio output on port C6 +AUDIO_ENABLE = yes # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. RGB_MATRIX_ENABLE = yes diff --git a/keyboards/planck/rev1/rules.mk b/keyboards/planck/rev1/rules.mk index 3411dd8df6..5669b906cc 100644 --- a/keyboards/planck/rev1/rules.mk +++ b/keyboards/planck/rev1/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/planck/rev2/rules.mk b/keyboards/planck/rev2/rules.mk index 3411dd8df6..5669b906cc 100644 --- a/keyboards/planck/rev2/rules.mk +++ b/keyboards/planck/rev2/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/planck/rev3/rules.mk b/keyboards/planck/rev3/rules.mk index 3411dd8df6..5669b906cc 100644 --- a/keyboards/planck/rev3/rules.mk +++ b/keyboards/planck/rev3/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/planck/rev4/rules.mk b/keyboards/planck/rev4/rules.mk index 0a6e75235b..0ffb0a1856 100644 --- a/keyboards/planck/rev4/rules.mk +++ b/keyboards/planck/rev4/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = yes # Audio output on port C6 +AUDIO_ENABLE = yes # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/planck/rev5/rules.mk b/keyboards/planck/rev5/rules.mk index 3610ed2696..ff4fee3860 100644 --- a/keyboards/planck/rev5/rules.mk +++ b/keyboards/planck/rev5/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = yes # Audio output on port C6 +AUDIO_ENABLE = yes # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/primekb/prime_l/rules.mk b/keyboards/primekb/prime_l/rules.mk index 8c56f867e4..03f76d5373 100644 --- a/keyboards/primekb/prime_l/rules.mk +++ b/keyboards/primekb/prime_l/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output DEFAULT_FOLDER = primekb/prime_l/v1 diff --git a/keyboards/primekb/prime_m/rules.mk b/keyboards/primekb/prime_m/rules.mk index a093709eec..009c1918b9 100644 --- a/keyboards/primekb/prime_m/rules.mk +++ b/keyboards/primekb/prime_m/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = numpad_5x6 diff --git a/keyboards/primekb/prime_o/rules.mk b/keyboards/primekb/prime_o/rules.mk index 25109701d9..e6d2bab20d 100644 --- a/keyboards/primekb/prime_o/rules.mk +++ b/keyboards/primekb/prime_o/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/projectkb/alice/rev1/rules.mk b/keyboards/projectkb/alice/rev1/rules.mk index 219e350cf9..1a716b9235 100644 --- a/keyboards/projectkb/alice/rev1/rules.mk +++ b/keyboards/projectkb/alice/rev1/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output WS2812_DRIVER = spi diff --git a/keyboards/projectkb/alice/rev2/rules.mk b/keyboards/projectkb/alice/rev2/rules.mk index 219e350cf9..1a716b9235 100644 --- a/keyboards/projectkb/alice/rev2/rules.mk +++ b/keyboards/projectkb/alice/rev2/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output WS2812_DRIVER = spi diff --git a/keyboards/puck/rules.mk b/keyboards/puck/rules.mk index 2d4cdc9009..2588e7b823 100644 --- a/keyboards/puck/rules.mk +++ b/keyboards/puck/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. diff --git a/keyboards/quad_h/lb75/rules.mk b/keyboards/quad_h/lb75/rules.mk index 1cb550d33f..ade3865832 100644 --- a/keyboards/quad_h/lb75/rules.mk +++ b/keyboards/quad_h/lb75/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/quantrik/kyuu/rules.mk b/keyboards/quantrik/kyuu/rules.mk index 39160e9865..86bb4c7592 100644 --- a/keyboards/quantrik/kyuu/rules.mk +++ b/keyboards/quantrik/kyuu/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/qwertyydox/rules.mk b/keyboards/qwertyydox/rules.mk index 6e45de0430..4f12c6f463 100644 --- a/keyboards/qwertyydox/rules.mk +++ b/keyboards/qwertyydox/rules.mk @@ -9,7 +9,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/rabbit/rabbit68/rules.mk b/keyboards/rabbit/rabbit68/rules.mk index 42265b6d38..3f20abe434 100644 --- a/keyboards/rabbit/rabbit68/rules.mk +++ b/keyboards/rabbit/rabbit68/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/redox/rules.mk b/keyboards/redox/rules.mk index 672e60d820..d87b5cf999 100644 --- a/keyboards/redox/rules.mk +++ b/keyboards/redox/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. SPLIT_KEYBOARD = yes diff --git a/keyboards/redscarf_i/rules.mk b/keyboards/redscarf_i/rules.mk index e78e02b2a9..b77d7f8ffc 100644 --- a/keyboards/redscarf_i/rules.mk +++ b/keyboards/redscarf_i/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode LAYOUTS = ortho_5x4 ortho_6x4 numpad_5x4 numpad_6x4 diff --git a/keyboards/redscarf_iiplus/verb/rules.mk b/keyboards/redscarf_iiplus/verb/rules.mk index 5047c3a98c..12bc921ece 100755 --- a/keyboards/redscarf_iiplus/verb/rules.mk +++ b/keyboards/redscarf_iiplus/verb/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output CUSTOM_MATRIX = yes SRC += matrix.c diff --git a/keyboards/redscarf_iiplus/verc/rules.mk b/keyboards/redscarf_iiplus/verc/rules.mk index 4e4abd5d4d..1f8f5278cf 100755 --- a/keyboards/redscarf_iiplus/verc/rules.mk +++ b/keyboards/redscarf_iiplus/verc/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output CUSTOM_MATRIX = yes SRC += matrix.c diff --git a/keyboards/redscarf_iiplus/verd/rules.mk b/keyboards/redscarf_iiplus/verd/rules.mk index e191c26504..dc3d149a38 100644 --- a/keyboards/redscarf_iiplus/verd/rules.mk +++ b/keyboards/redscarf_iiplus/verd/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output CUSTOM_MATRIX = yes SRC += matrix.c diff --git a/keyboards/retro_75/rules.mk b/keyboards/retro_75/rules.mk index 901e38c9c5..9c4bfcdea6 100644 --- a/keyboards/retro_75/rules.mk +++ b/keyboards/retro_75/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/reversestudio/decadepad/rules.mk b/keyboards/reversestudio/decadepad/rules.mk index a28c9cdc6e..2c272ca2fa 100644 --- a/keyboards/reversestudio/decadepad/rules.mk +++ b/keyboards/reversestudio/decadepad/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = yes # Unicode # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/reviung34/rules.mk b/keyboards/reviung34/rules.mk index 2fbc01cd9e..12ee34dbf3 100755 --- a/keyboards/reviung34/rules.mk +++ b/keyboards/reviung34/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/reviung39/rules.mk b/keyboards/reviung39/rules.mk index 2fbc01cd9e..12ee34dbf3 100644 --- a/keyboards/reviung39/rules.mk +++ b/keyboards/reviung39/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/reviung41/rules.mk b/keyboards/reviung41/rules.mk index dac29ee075..0f53969e28 100644 --- a/keyboards/reviung41/rules.mk +++ b/keyboards/reviung41/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/rgbkb/zen/rules.mk b/keyboards/rgbkb/zen/rules.mk index b56cdfd12d..99a61c0c06 100644 --- a/keyboards/rgbkb/zen/rules.mk +++ b/keyboards/rgbkb/zen/rules.mk @@ -29,7 +29,7 @@ EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/rgbkb/zygomorph/rules.mk b/keyboards/rgbkb/zygomorph/rules.mk index d8f4c1309f..06dc5ff950 100644 --- a/keyboards/rgbkb/zygomorph/rules.mk +++ b/keyboards/rgbkb/zygomorph/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGB_MATRIX_DRIVER = WS2812 SPLIT_KEYBOARD = yes diff --git a/keyboards/runner3680/rules.mk b/keyboards/runner3680/rules.mk index b8de0a4d22..6c22480b1d 100644 --- a/keyboards/runner3680/rules.mk +++ b/keyboards/runner3680/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD = yes # Enables split keyboard support diff --git a/keyboards/sck/m0116b/rules.mk b/keyboards/sck/m0116b/rules.mk index bd3868946b..09baed14c5 100644 --- a/keyboards/sck/m0116b/rules.mk +++ b/keyboards/sck/m0116b/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/sck/osa/rules.mk b/keyboards/sck/osa/rules.mk index a3e8f27978..2f68f82d13 100644 --- a/keyboards/sck/osa/rules.mk +++ b/keyboards/sck/osa/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = alice alice_split_bs diff --git a/keyboards/scythe/rules.mk b/keyboards/scythe/rules.mk index b951bdf09e..bc1647a4aa 100644 --- a/keyboards/scythe/rules.mk +++ b/keyboards/scythe/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD = yes # Use shared split_common RGBLIGHT_SPLIT = yes diff --git a/keyboards/sentraq/number_pad/rules.mk b/keyboards/sentraq/number_pad/rules.mk index bf79fc89ca..3ecfb612e6 100644 --- a/keyboards/sentraq/number_pad/rules.mk +++ b/keyboards/sentraq/number_pad/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/sentraq/s60_x/default/rules.mk b/keyboards/sentraq/s60_x/default/rules.mk index 1eeca11eb4..45ae2f090e 100644 --- a/keyboards/sentraq/s60_x/default/rules.mk +++ b/keyboards/sentraq/s60_x/default/rules.mk @@ -14,6 +14,6 @@ EXTRAKEY_ENABLE = yes # Audio control and System control SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_iso 60_hhkb diff --git a/keyboards/sentraq/s60_x/rgb/rules.mk b/keyboards/sentraq/s60_x/rgb/rules.mk index fca886d761..23259e9395 100644 --- a/keyboards/sentraq/s60_x/rgb/rules.mk +++ b/keyboards/sentraq/s60_x/rgb/rules.mk @@ -14,7 +14,7 @@ EXTRAKEY_ENABLE = yes # Audio control and System control SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work diff --git a/keyboards/sentraq/s65_plus/rules.mk b/keyboards/sentraq/s65_plus/rules.mk index 61695ce254..8c1227c351 100644 --- a/keyboards/sentraq/s65_plus/rules.mk +++ b/keyboards/sentraq/s65_plus/rules.mk @@ -13,7 +13,7 @@ EXTRAKEY_ENABLE = yes # Audio control and System control # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable RGB light diff --git a/keyboards/sentraq/s65_x/rules.mk b/keyboards/sentraq/s65_x/rules.mk index f7704d865c..2e5991e3e4 100644 --- a/keyboards/sentraq/s65_x/rules.mk +++ b/keyboards/sentraq/s65_x/rules.mk @@ -13,7 +13,7 @@ EXTRAKEY_ENABLE = yes # Audio control and System control # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable RGB light diff --git a/keyboards/setta21/rules.mk b/keyboards/setta21/rules.mk index 12527ef3ad..8e723b0ff7 100644 --- a/keyboards/setta21/rules.mk +++ b/keyboards/setta21/rules.mk @@ -14,7 +14,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. TAP_DANCE_ENABLE = no diff --git a/keyboards/shambles/rules.mk b/keyboards/shambles/rules.mk index ab0eccedd8..49ec442115 100644 --- a/keyboards/shambles/rules.mk +++ b/keyboards/shambles/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/shiro/rules.mk b/keyboards/shiro/rules.mk index 041dabc194..8fde4f64f1 100644 --- a/keyboards/shiro/rules.mk +++ b/keyboards/shiro/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/sidderskb/majbritt/rev1/rules.mk b/keyboards/sidderskb/majbritt/rev1/rules.mk index c4153c543f..71e5c41e74 100644 --- a/keyboards/sidderskb/majbritt/rev1/rules.mk +++ b/keyboards/sidderskb/majbritt/rev1/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/silverbullet44/rules.mk b/keyboards/silverbullet44/rules.mk index a7a4dd9c12..639bead24f 100644 --- a/keyboards/silverbullet44/rules.mk +++ b/keyboards/silverbullet44/rules.mk @@ -21,6 +21,6 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow RGB_MATRIX_ENABLE = no RGB_MATRIX_DRIVER = WS2812 UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = yes # Audio output on port B6 +AUDIO_ENABLE = yes # Audio output SPLIT_KEYBOARD = yes LTO_ENABLE = yes diff --git a/keyboards/smk60/rules.mk b/keyboards/smk60/rules.mk index f49e78694d..79c314dea6 100644 --- a/keyboards/smk60/rules.mk +++ b/keyboards/smk60/rules.mk @@ -18,6 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes # Use RGB bottom light LAYOUTS = 60_ansi 60_hhkb 60_iso diff --git a/keyboards/snampad/rules.mk b/keyboards/snampad/rules.mk index 9ac9aed540..f245598547 100644 --- a/keyboards/snampad/rules.mk +++ b/keyboards/snampad/rules.mk @@ -19,6 +19,6 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = numpad_6x4 diff --git a/keyboards/spacetime/rules.mk b/keyboards/spacetime/rules.mk index f6c1ad73e3..e680660e55 100644 --- a/keyboards/spacetime/rules.mk +++ b/keyboards/spacetime/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output OLED_ENABLE = no # Enable generic behavior for split boards diff --git a/keyboards/splitkb/kyria/rules.mk b/keyboards/splitkb/kyria/rules.mk index 97b2778d67..3ac6b3822b 100644 --- a/keyboards/splitkb/kyria/rules.mk +++ b/keyboards/splitkb/kyria/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD = yes # Split common LTO_ENABLE = yes diff --git a/keyboards/splitreus62/rules.mk b/keyboards/splitreus62/rules.mk index 9f2ed05f63..a94c727fe8 100644 --- a/keyboards/splitreus62/rules.mk +++ b/keyboards/splitreus62/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode SPLIT_KEYBOARD = yes diff --git a/keyboards/standaside/rules.mk b/keyboards/standaside/rules.mk index 78d4733aad..60da7f9e4a 100644 --- a/keyboards/standaside/rules.mk +++ b/keyboards/standaside/rules.mk @@ -18,5 +18,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes # Enable RGB underlighting support diff --git a/keyboards/subatomic/rules.mk b/keyboards/subatomic/rules.mk index 687f1adee1..fe60b04436 100644 --- a/keyboards/subatomic/rules.mk +++ b/keyboards/subatomic/rules.mk @@ -16,7 +16,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality MIDI_ENABLE = yes # MIDI support -AUDIO_ENABLE = no # Audio output +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/suihankey/rules.mk b/keyboards/suihankey/rules.mk index 2132c83143..5feea22102 100644 --- a/keyboards/suihankey/rules.mk +++ b/keyboards/suihankey/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output OLED_ENABLE = yes OLED_DRIVER = SSD1306 SPLIT_KEYBOARD = no diff --git a/keyboards/switchplate/southpaw_65/rules.mk b/keyboards/switchplate/southpaw_65/rules.mk index 62f8305512..c10c24612a 100644 --- a/keyboards/switchplate/southpaw_65/rules.mk +++ b/keyboards/switchplate/southpaw_65/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LTO_ENABLE = yes # custom matrix setup diff --git a/keyboards/switchplate/southpaw_fullsize/rules.mk b/keyboards/switchplate/southpaw_fullsize/rules.mk index 3779bbc3d0..39c00d844f 100644 --- a/keyboards/switchplate/southpaw_fullsize/rules.mk +++ b/keyboards/switchplate/southpaw_fullsize/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/tada68/rules.mk b/keyboards/tada68/rules.mk index 1ad7db7392..d5d5ce6ce7 100755 --- a/keyboards/tada68/rules.mk +++ b/keyboards/tada68/rules.mk @@ -21,7 +21,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode LAYOUTS = 65_ansi 65_iso diff --git a/keyboards/tender/macrowo_pad/rules.mk b/keyboards/tender/macrowo_pad/rules.mk index d6545babd0..99eea9632e 100644 --- a/keyboards/tender/macrowo_pad/rules.mk +++ b/keyboards/tender/macrowo_pad/rules.mk @@ -17,5 +17,5 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = no # Enable support for EC11 Rotary Encoder diff --git a/keyboards/tg4x/rules.mk b/keyboards/tg4x/rules.mk index a38430b8bc..c25369953c 100644 --- a/keyboards/tg4x/rules.mk +++ b/keyboards/tg4x/rules.mk @@ -18,6 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LTO_ENABLE = yes diff --git a/keyboards/the_royal/liminal/rules.mk b/keyboards/the_royal/liminal/rules.mk index a9b2daed72..aade774c6a 100644 --- a/keyboards/the_royal/liminal/rules.mk +++ b/keyboards/the_royal/liminal/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/the_royal/schwann/rules.mk b/keyboards/the_royal/schwann/rules.mk index 4f99b3e06d..815a5c9183 100644 --- a/keyboards/the_royal/schwann/rules.mk +++ b/keyboards/the_royal/schwann/rules.mk @@ -18,5 +18,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/the_ruler/rules.mk b/keyboards/the_ruler/rules.mk index d690d238ec..fa60d0f3ae 100644 --- a/keyboards/the_ruler/rules.mk +++ b/keyboards/the_ruler/rules.mk @@ -18,5 +18,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. diff --git a/keyboards/thedogkeyboard/rules.mk b/keyboards/thedogkeyboard/rules.mk index 14dea4a66b..736a76b75d 100644 --- a/keyboards/thedogkeyboard/rules.mk +++ b/keyboards/thedogkeyboard/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output CUSTOM_MATRIX = yes SRC += matrix.c diff --git a/keyboards/themadnoodle/ncc1701kb/v2/rules.mk b/keyboards/themadnoodle/ncc1701kb/v2/rules.mk index a703c06ec0..758ae3594d 100644 --- a/keyboards/themadnoodle/ncc1701kb/v2/rules.mk +++ b/keyboards/themadnoodle/ncc1701kb/v2/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = yes # Unicode TAP_DANCE_ENABLE = no ENCODER_ENABLE = yes diff --git a/keyboards/themadnoodle/noodlepad/rules.mk b/keyboards/themadnoodle/noodlepad/rules.mk index a703c06ec0..758ae3594d 100644 --- a/keyboards/themadnoodle/noodlepad/rules.mk +++ b/keyboards/themadnoodle/noodlepad/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = yes # Unicode TAP_DANCE_ENABLE = no ENCODER_ENABLE = yes diff --git a/keyboards/thevankeyboards/caravan/rules.mk b/keyboards/thevankeyboards/caravan/rules.mk index e000125ee3..b40cdfd96e 100644 --- a/keyboards/thevankeyboards/caravan/rules.mk +++ b/keyboards/thevankeyboards/caravan/rules.mk @@ -15,4 +15,4 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/thevankeyboards/minivan/rules.mk b/keyboards/thevankeyboards/minivan/rules.mk index acd6a0d06c..075a44f58d 100644 --- a/keyboards/thevankeyboards/minivan/rules.mk +++ b/keyboards/thevankeyboards/minivan/rules.mk @@ -18,5 +18,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes # Enable support for RGB LEDs diff --git a/keyboards/thevankeyboards/roadkit/rules.mk b/keyboards/thevankeyboards/roadkit/rules.mk index d175eaef8f..51a84eeb95 100644 --- a/keyboards/thevankeyboards/roadkit/rules.mk +++ b/keyboards/thevankeyboards/roadkit/rules.mk @@ -18,6 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = numpad_4x4 ortho_4x4 diff --git a/keyboards/tkc/tkc1800/rules.mk b/keyboards/tkc/tkc1800/rules.mk index 224c52c3f0..3e055a8aee 100644 --- a/keyboards/tkc/tkc1800/rules.mk +++ b/keyboards/tkc/tkc1800/rules.mk @@ -20,6 +20,6 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output OLED_ENABLE = yes OLED_DRIVER = SSD1306 diff --git a/keyboards/tmo50/rules.mk b/keyboards/tmo50/rules.mk index 7bc7e54be3..a881bae71b 100644 --- a/keyboards/tmo50/rules.mk +++ b/keyboards/tmo50/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/tokyokeyboard/tokyo60/rules.mk b/keyboards/tokyokeyboard/tokyo60/rules.mk index 0e2770f0a8..2be3157442 100644 --- a/keyboards/tokyokeyboard/tokyo60/rules.mk +++ b/keyboards/tokyokeyboard/tokyo60/rules.mk @@ -14,7 +14,7 @@ EXTRAKEY_ENABLE = yes # Audio control and System control SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work diff --git a/keyboards/touchpad/rules.mk b/keyboards/touchpad/rules.mk index 613bf3932f..ee0e428c2b 100644 --- a/keyboards/touchpad/rules.mk +++ b/keyboards/touchpad/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. CUSTOM_MATRIX = yes diff --git a/keyboards/tr60w/rules.mk b/keyboards/tr60w/rules.mk index 4e1228613d..81f481950a 100644 --- a/keyboards/tr60w/rules.mk +++ b/keyboards/tr60w/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/treadstone32/rules.mk b/keyboards/treadstone32/rules.mk index 0e849dfb13..450541136e 100644 --- a/keyboards/treadstone32/rules.mk +++ b/keyboards/treadstone32/rules.mk @@ -11,7 +11,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. LEADER_ENABLE = no diff --git a/keyboards/treadstone48/rules.mk b/keyboards/treadstone48/rules.mk index 68f1bd7078..fa67c4f8c9 100644 --- a/keyboards/treadstone48/rules.mk +++ b/keyboards/treadstone48/rules.mk @@ -16,7 +16,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD = yes MOUSEKEY_ENABLE = yes # Mouse keys diff --git a/keyboards/treasure/type9/rules.mk b/keyboards/treasure/type9/rules.mk index 46c9b3f56b..f61fb39a1c 100644 --- a/keyboards/treasure/type9/rules.mk +++ b/keyboards/treasure/type9/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/ua62/rules.mk b/keyboards/ua62/rules.mk index 92824ca43f..bd712c0982 100644 --- a/keyboards/ua62/rules.mk +++ b/keyboards/ua62/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/uranuma/rules.mk b/keyboards/uranuma/rules.mk index 9f59d4bc75..5c865ddd1b 100644 --- a/keyboards/uranuma/rules.mk +++ b/keyboards/uranuma/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output #COMBO_ENABLE = yes #SRC += .nicola.c \ diff --git a/keyboards/ut472/rules.mk b/keyboards/ut472/rules.mk index 61de88c5a5..66a0946e0e 100644 --- a/keyboards/ut472/rules.mk +++ b/keyboards/ut472/rules.mk @@ -18,6 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes TAP_DANCE_ENABLE = no # Enable tap dance feature diff --git a/keyboards/uzu42/rules.mk b/keyboards/uzu42/rules.mk index 4c603e7e72..ac742c8c02 100644 --- a/keyboards/uzu42/rules.mk +++ b/keyboards/uzu42/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/v60_type_r/rules.mk b/keyboards/v60_type_r/rules.mk index 9397ebd3dc..57c21f367d 100644 --- a/keyboards/v60_type_r/rules.mk +++ b/keyboards/v60_type_r/rules.mk @@ -20,7 +20,7 @@ BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable the RGB Underglow RGBLIGHT_CUSTOM_DRIVER = yes UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LTO_ENABLE = yes diff --git a/keyboards/vitamins_included/rules.mk b/keyboards/vitamins_included/rules.mk index 64683216ca..7861da178f 100644 --- a/keyboards/vitamins_included/rules.mk +++ b/keyboards/vitamins_included/rules.mk @@ -5,7 +5,7 @@ MCU = atmega32u4 # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -AUDIO_ENABLE = yes # Audio output on port C6 +AUDIO_ENABLE = yes # Audio output BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite COMMAND_ENABLE = no # Commands for debug and configuration diff --git a/keyboards/waldo/rules.mk b/keyboards/waldo/rules.mk index 5ed104066a..e1a743e0e7 100644 --- a/keyboards/waldo/rules.mk +++ b/keyboards/waldo/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. diff --git a/keyboards/wallaby/rules.mk b/keyboards/wallaby/rules.mk index cd1c169c1c..29534f6570 100644 --- a/keyboards/wallaby/rules.mk +++ b/keyboards/wallaby/rules.mk @@ -18,6 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = tkl_ansi diff --git a/keyboards/westfoxtrot/cyclops/rules.mk b/keyboards/westfoxtrot/cyclops/rules.mk index 286ceaf409..a4fe123651 100644 --- a/keyboards/westfoxtrot/cyclops/rules.mk +++ b/keyboards/westfoxtrot/cyclops/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/westfoxtrot/cypher/rev1/rules.mk b/keyboards/westfoxtrot/cypher/rev1/rules.mk index 557abfb148..25e7b4b658 100644 --- a/keyboards/westfoxtrot/cypher/rev1/rules.mk +++ b/keyboards/westfoxtrot/cypher/rev1/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/westfoxtrot/cypher/rev5/rules.mk b/keyboards/westfoxtrot/cypher/rev5/rules.mk index 0204567be6..5c4ab230c2 100644 --- a/keyboards/westfoxtrot/cypher/rev5/rules.mk +++ b/keyboards/westfoxtrot/cypher/rev5/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/wheatfield/blocked65/rules.mk b/keyboards/wheatfield/blocked65/rules.mk index 4c0f57d9a8..f8ade5009b 100644 --- a/keyboards/wheatfield/blocked65/rules.mk +++ b/keyboards/wheatfield/blocked65/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode LAYOUTS = 65_ansi_blocker diff --git a/keyboards/wilba_tech/rama_works_koyu/rules.mk b/keyboards/wilba_tech/rama_works_koyu/rules.mk index d78d19f5da..c73652815b 100644 --- a/keyboards/wilba_tech/rama_works_koyu/rules.mk +++ b/keyboards/wilba_tech/rama_works_koyu/rules.mk @@ -20,7 +20,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/wilba_tech/rama_works_m10_b/rules.mk b/keyboards/wilba_tech/rama_works_m10_b/rules.mk index 3e1ec4ab25..df4c1b12c1 100644 --- a/keyboards/wilba_tech/rama_works_m10_b/rules.mk +++ b/keyboards/wilba_tech/rama_works_m10_b/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/wilba_tech/rama_works_m60_a/rules.mk b/keyboards/wilba_tech/rama_works_m60_a/rules.mk index 28b8ba2389..5bcc1b9b79 100644 --- a/keyboards/wilba_tech/rama_works_m60_a/rules.mk +++ b/keyboards/wilba_tech/rama_works_m60_a/rules.mk @@ -20,7 +20,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/wilba_tech/rama_works_m6_a/rules.mk b/keyboards/wilba_tech/rama_works_m6_a/rules.mk index 9e79c8dc1b..fb3f1ea560 100644 --- a/keyboards/wilba_tech/rama_works_m6_a/rules.mk +++ b/keyboards/wilba_tech/rama_works_m6_a/rules.mk @@ -19,7 +19,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. diff --git a/keyboards/wilba_tech/rama_works_m6_b/rules.mk b/keyboards/wilba_tech/rama_works_m6_b/rules.mk index b6bf588b66..e12acee899 100644 --- a/keyboards/wilba_tech/rama_works_m6_b/rules.mk +++ b/keyboards/wilba_tech/rama_works_m6_b/rules.mk @@ -19,7 +19,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. diff --git a/keyboards/wilba_tech/rama_works_u80_a/rules.mk b/keyboards/wilba_tech/rama_works_u80_a/rules.mk index d6946696bb..52b6125a4e 100644 --- a/keyboards/wilba_tech/rama_works_u80_a/rules.mk +++ b/keyboards/wilba_tech/rama_works_u80_a/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output CIE1931_CURVE = yes # project specific files diff --git a/keyboards/wilba_tech/wt60_a/rules.mk b/keyboards/wilba_tech/wt60_a/rules.mk index 35f8f7a7b7..879d6de4c9 100644 --- a/keyboards/wilba_tech/wt60_a/rules.mk +++ b/keyboards/wilba_tech/wt60_a/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output # project specific files SRC = drivers/led/issi/is31fl3736.c \ diff --git a/keyboards/wilba_tech/wt60_b/rules.mk b/keyboards/wilba_tech/wt60_b/rules.mk index fca43328cc..575120b390 100644 --- a/keyboards/wilba_tech/wt60_b/rules.mk +++ b/keyboards/wilba_tech/wt60_b/rules.mk @@ -20,7 +20,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/wilba_tech/wt60_bx/rules.mk b/keyboards/wilba_tech/wt60_bx/rules.mk index fca43328cc..575120b390 100644 --- a/keyboards/wilba_tech/wt60_bx/rules.mk +++ b/keyboards/wilba_tech/wt60_bx/rules.mk @@ -20,7 +20,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/wilba_tech/wt60_c/rules.mk b/keyboards/wilba_tech/wt60_c/rules.mk index fca43328cc..575120b390 100644 --- a/keyboards/wilba_tech/wt60_c/rules.mk +++ b/keyboards/wilba_tech/wt60_c/rules.mk @@ -20,7 +20,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/wilba_tech/wt60_d/rules.mk b/keyboards/wilba_tech/wt60_d/rules.mk index 3e1ec4ab25..df4c1b12c1 100644 --- a/keyboards/wilba_tech/wt60_d/rules.mk +++ b/keyboards/wilba_tech/wt60_d/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/wilba_tech/wt60_xt/rules.mk b/keyboards/wilba_tech/wt60_xt/rules.mk index 4962648658..a910daef21 100644 --- a/keyboards/wilba_tech/wt60_xt/rules.mk +++ b/keyboards/wilba_tech/wt60_xt/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = yes # Audio output on port C6 +AUDIO_ENABLE = yes # Audio output diff --git a/keyboards/wilba_tech/wt65_a/rules.mk b/keyboards/wilba_tech/wt65_a/rules.mk index 35f8f7a7b7..879d6de4c9 100644 --- a/keyboards/wilba_tech/wt65_a/rules.mk +++ b/keyboards/wilba_tech/wt65_a/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output # project specific files SRC = drivers/led/issi/is31fl3736.c \ diff --git a/keyboards/wilba_tech/wt65_b/rules.mk b/keyboards/wilba_tech/wt65_b/rules.mk index 35f8f7a7b7..879d6de4c9 100644 --- a/keyboards/wilba_tech/wt65_b/rules.mk +++ b/keyboards/wilba_tech/wt65_b/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output # project specific files SRC = drivers/led/issi/is31fl3736.c \ diff --git a/keyboards/wilba_tech/wt69_a/rules.mk b/keyboards/wilba_tech/wt69_a/rules.mk index 5c9f6e4354..034fc8b2f1 100644 --- a/keyboards/wilba_tech/wt69_a/rules.mk +++ b/keyboards/wilba_tech/wt69_a/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output # project specific files SRC = keyboards/wilba_tech/wt_main.c diff --git a/keyboards/wilba_tech/wt75_a/rules.mk b/keyboards/wilba_tech/wt75_a/rules.mk index 35f8f7a7b7..879d6de4c9 100644 --- a/keyboards/wilba_tech/wt75_a/rules.mk +++ b/keyboards/wilba_tech/wt75_a/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output # project specific files SRC = drivers/led/issi/is31fl3736.c \ diff --git a/keyboards/wilba_tech/wt75_b/rules.mk b/keyboards/wilba_tech/wt75_b/rules.mk index 35f8f7a7b7..879d6de4c9 100644 --- a/keyboards/wilba_tech/wt75_b/rules.mk +++ b/keyboards/wilba_tech/wt75_b/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output # project specific files SRC = drivers/led/issi/is31fl3736.c \ diff --git a/keyboards/wilba_tech/wt75_c/rules.mk b/keyboards/wilba_tech/wt75_c/rules.mk index 35f8f7a7b7..879d6de4c9 100644 --- a/keyboards/wilba_tech/wt75_c/rules.mk +++ b/keyboards/wilba_tech/wt75_c/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output # project specific files SRC = drivers/led/issi/is31fl3736.c \ diff --git a/keyboards/wilba_tech/wt80_a/rules.mk b/keyboards/wilba_tech/wt80_a/rules.mk index 35f8f7a7b7..879d6de4c9 100644 --- a/keyboards/wilba_tech/wt80_a/rules.mk +++ b/keyboards/wilba_tech/wt80_a/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output # project specific files SRC = drivers/led/issi/is31fl3736.c \ diff --git a/keyboards/wilba_tech/wt80_bc/rules.mk b/keyboards/wilba_tech/wt80_bc/rules.mk index cd43ae18ed..c38e84e039 100644 --- a/keyboards/wilba_tech/wt80_bc/rules.mk +++ b/keyboards/wilba_tech/wt80_bc/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output # project specific files SRC = keyboards/wilba_tech/wt_main.c diff --git a/keyboards/wilba_tech/wt8_a/rules.mk b/keyboards/wilba_tech/wt8_a/rules.mk index 5c9f6e4354..034fc8b2f1 100644 --- a/keyboards/wilba_tech/wt8_a/rules.mk +++ b/keyboards/wilba_tech/wt8_a/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output # project specific files SRC = keyboards/wilba_tech/wt_main.c diff --git a/keyboards/wilba_tech/zeal60/rules.mk b/keyboards/wilba_tech/zeal60/rules.mk index 30b580e7db..832077492d 100644 --- a/keyboards/wilba_tech/zeal60/rules.mk +++ b/keyboards/wilba_tech/zeal60/rules.mk @@ -20,7 +20,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/wilba_tech/zeal65/rules.mk b/keyboards/wilba_tech/zeal65/rules.mk index e54d6f0ae6..aa84617cb6 100644 --- a/keyboards/wilba_tech/zeal65/rules.mk +++ b/keyboards/wilba_tech/zeal65/rules.mk @@ -20,7 +20,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/wolfmarkclub/wm1/rules.mk b/keyboards/wolfmarkclub/wm1/rules.mk index 0a55b5a2e1..50f792715d 100644 --- a/keyboards/wolfmarkclub/wm1/rules.mk +++ b/keyboards/wolfmarkclub/wm1/rules.mk @@ -22,7 +22,7 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LTO_ENABLE = yes # Enter lower-power sleep mode when on the ChibiOS idle thread diff --git a/keyboards/wsk/gothic50/rules.mk b/keyboards/wsk/gothic50/rules.mk index c10b077b32..898966317b 100644 --- a/keyboards/wsk/gothic50/rules.mk +++ b/keyboards/wsk/gothic50/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/wsk/gothic70/rules.mk b/keyboards/wsk/gothic70/rules.mk index c10b077b32..898966317b 100644 --- a/keyboards/wsk/gothic70/rules.mk +++ b/keyboards/wsk/gothic70/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/wsk/jerkin/rules.mk b/keyboards/wsk/jerkin/rules.mk index 57f68053c8..afb02b723b 100644 --- a/keyboards/wsk/jerkin/rules.mk +++ b/keyboards/wsk/jerkin/rules.mk @@ -18,5 +18,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow diff --git a/keyboards/wsk/tkl30/rules.mk b/keyboards/wsk/tkl30/rules.mk index 6fb6c91314..4411195da2 100644 --- a/keyboards/wsk/tkl30/rules.mk +++ b/keyboards/wsk/tkl30/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/xelus/dawn60/rev1/rules.mk b/keyboards/xelus/dawn60/rev1/rules.mk index b9e3316473..59c338461b 100644 --- a/keyboards/xelus/dawn60/rev1/rules.mk +++ b/keyboards/xelus/dawn60/rev1/rules.mk @@ -23,7 +23,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. - We have custom RGB underglow CIE1931_CURVE = yes diff --git a/keyboards/xelus/dawn60/rev1_qmk/rules.mk b/keyboards/xelus/dawn60/rev1_qmk/rules.mk index c70f8f2c4b..ae963e6e07 100644 --- a/keyboards/xelus/dawn60/rev1_qmk/rules.mk +++ b/keyboards/xelus/dawn60/rev1_qmk/rules.mk @@ -23,7 +23,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. - We have custom RGB underglow diff --git a/keyboards/xelus/pachi/rgb/rules.mk b/keyboards/xelus/pachi/rgb/rules.mk index 67c6cc7c48..79d44bf90e 100644 --- a/keyboards/xelus/pachi/rgb/rules.mk +++ b/keyboards/xelus/pachi/rgb/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches EEPROM_DRIVER = i2c diff --git a/keyboards/xelus/snap96/rules.mk b/keyboards/xelus/snap96/rules.mk index ba128a005c..fdedbf0c50 100644 --- a/keyboards/xelus/snap96/rules.mk +++ b/keyboards/xelus/snap96/rules.mk @@ -18,5 +18,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. - We have custom RGB underglow diff --git a/keyboards/xiudi/xd002/rules.mk b/keyboards/xiudi/xd002/rules.mk index a68c2211fe..cb95d7992e 100644 --- a/keyboards/xiudi/xd002/rules.mk +++ b/keyboards/xiudi/xd002/rules.mk @@ -21,7 +21,7 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output # Save as much space as we can... LTO_ENABLE = yes diff --git a/keyboards/xiudi/xd004/v1/rules.mk b/keyboards/xiudi/xd004/v1/rules.mk index 82d7e49d2e..41eae5bb17 100644 --- a/keyboards/xiudi/xd004/v1/rules.mk +++ b/keyboards/xiudi/xd004/v1/rules.mk @@ -12,7 +12,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/xiudi/xd60/rev2/rules.mk b/keyboards/xiudi/xd60/rev2/rules.mk index 932663676e..1e7721da3a 100644 --- a/keyboards/xiudi/xd60/rev2/rules.mk +++ b/keyboards/xiudi/xd60/rev2/rules.mk @@ -12,7 +12,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/xiudi/xd60/rev3/rules.mk b/keyboards/xiudi/xd60/rev3/rules.mk index 932663676e..1e7721da3a 100644 --- a/keyboards/xiudi/xd60/rev3/rules.mk +++ b/keyboards/xiudi/xd60/rev3/rules.mk @@ -12,7 +12,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/xiudi/xd68/rules.mk b/keyboards/xiudi/xd68/rules.mk index 37554c4ae8..ccff681631 100644 --- a/keyboards/xiudi/xd68/rules.mk +++ b/keyboards/xiudi/xd68/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode LAYOUTS = 65_ansi 65_ansi_split_bs 65_iso diff --git a/keyboards/xiudi/xd84/rules.mk b/keyboards/xiudi/xd84/rules.mk index fb1d559630..c467036991 100644 --- a/keyboards/xiudi/xd84/rules.mk +++ b/keyboards/xiudi/xd84/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LTO_ENABLE = yes # custom matrix setup diff --git a/keyboards/xiudi/xd87/rules.mk b/keyboards/xiudi/xd87/rules.mk index c21ef6fbbb..0bde383ae6 100644 --- a/keyboards/xiudi/xd87/rules.mk +++ b/keyboards/xiudi/xd87/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output # Supported layouts LAYOUTS = tkl_ansi tkl_iso diff --git a/keyboards/xiudi/xd96/rules.mk b/keyboards/xiudi/xd96/rules.mk index 62f8305512..c10c24612a 100644 --- a/keyboards/xiudi/xd96/rules.mk +++ b/keyboards/xiudi/xd96/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LTO_ENABLE = yes # custom matrix setup diff --git a/keyboards/xw60/rules.mk b/keyboards/xw60/rules.mk index 9f3c7490df..81288f05ca 100644 --- a/keyboards/xw60/rules.mk +++ b/keyboards/xw60/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. HAPTIC_ENABLE += SOLENOID diff --git a/keyboards/yatara/drink_me/rules.mk b/keyboards/yatara/drink_me/rules.mk index 4796590bd7..ec3729d115 100644 --- a/keyboards/yatara/drink_me/rules.mk +++ b/keyboards/yatara/drink_me/rules.mk @@ -18,4 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/yd60mq/rules.mk b/keyboards/yd60mq/rules.mk index 70f6d9cf19..280751e609 100644 --- a/keyboards/yd60mq/rules.mk +++ b/keyboards/yd60mq/rules.mk @@ -18,7 +18,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_ansi_tsangan 60_hhkb 60_iso 60_iso_split_bs_rshift 60_iso_tsangan diff --git a/keyboards/yd68/rules.mk b/keyboards/yd68/rules.mk index 04e3c2c644..05f4a7157a 100644 --- a/keyboards/yd68/rules.mk +++ b/keyboards/yd68/rules.mk @@ -19,4 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/ymdk/ymd09/rules.mk b/keyboards/ymdk/ymd09/rules.mk index c129976ffe..8a43e9d186 100644 --- a/keyboards/ymdk/ymd09/rules.mk +++ b/keyboards/ymdk/ymd09/rules.mk @@ -18,5 +18,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LTO_ENABLE = yes # reduce firmware size diff --git a/keyboards/yncognito/batpad/rules.mk b/keyboards/yncognito/batpad/rules.mk index 543b98aa52..0863a93c52 100644 --- a/keyboards/yncognito/batpad/rules.mk +++ b/keyboards/yncognito/batpad/rules.mk @@ -20,7 +20,7 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGB_MATRIX_ENABLE = yes RGB_MATRIX_DRIVER = WS2812 UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output # generated by KBFirmware JSON to QMK Parser # https://noroadsleft.github.io/kbf_qmk_converter/ diff --git a/keyboards/yosino58/rules.mk b/keyboards/yosino58/rules.mk index 643c8ea5a2..97b37ba1d3 100644 --- a/keyboards/yosino58/rules.mk +++ b/keyboards/yosino58/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SUBPROJECT_rev1 = no diff --git a/keyboards/yurei/rules.mk b/keyboards/yurei/rules.mk index 96e0373d2b..a079a5d484 100644 --- a/keyboards/yurei/rules.mk +++ b/keyboards/yurei/rules.mk @@ -18,6 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output LAYOUTS = tkl_ansi diff --git a/keyboards/yushakobo/quick7/rules.mk b/keyboards/yushakobo/quick7/rules.mk index b39a7779f6..9813e7659f 100644 --- a/keyboards/yushakobo/quick7/rules.mk +++ b/keyboards/yushakobo/quick7/rules.mk @@ -18,6 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes # Enable support for Rotary Encoder diff --git a/keyboards/zfrontier/big_switch/rules.mk b/keyboards/zfrontier/big_switch/rules.mk index 80ffdca8a9..762dab69e8 100644 --- a/keyboards/zfrontier/big_switch/rules.mk +++ b/keyboards/zfrontier/big_switch/rules.mk @@ -18,5 +18,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output TAP_DANCE_ENABLE = no diff --git a/keyboards/zinc/keymaps/default/rules.mk b/keyboards/zinc/keymaps/default/rules.mk index a8df98fd40..883f0fc603 100644 --- a/keyboards/zinc/keymaps/default/rules.mk +++ b/keyboards/zinc/keymaps/default/rules.mk @@ -10,7 +10,7 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. SWAP_HANDS_ENABLE = no # Enable one-hand typing diff --git a/keyboards/zinc/rules.mk b/keyboards/zinc/rules.mk index 9819d4134c..2a42dddcd7 100644 --- a/keyboards/zinc/rules.mk +++ b/keyboards/zinc/rules.mk @@ -15,7 +15,7 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output on port C6 +AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend From 19e33b685fe6ca05bc1c986a272c790ea0cdba45 Mon Sep 17 00:00:00 2001 From: Dasky <32983009+daskygit@users.noreply.github.com> Date: Tue, 21 Sep 2021 15:52:57 +0100 Subject: [PATCH 054/595] [Docs] Modify encoder_update_user example to return false (#14541) --- docs/feature_encoders.md | 2 +- docs/ja/feature_encoders.md | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/docs/feature_encoders.md b/docs/feature_encoders.md index 509f55b917..8e854c1e58 100644 --- a/docs/feature_encoders.md +++ b/docs/feature_encoders.md @@ -81,7 +81,7 @@ bool encoder_update_user(uint8_t index, bool clockwise) { tap_code(KC_UP); } } - return true; + return false; } ``` diff --git a/docs/ja/feature_encoders.md b/docs/ja/feature_encoders.md index 21f42d38b7..b93d9a9a28 100644 --- a/docs/ja/feature_encoders.md +++ b/docs/ja/feature_encoders.md @@ -76,7 +76,7 @@ bool encoder_update_user(uint8_t index, bool clockwise) { tap_code(KC_UP); } } - return true; + return false; } ``` From be3259b793a1fe4f42c20707e187371dd917a18f Mon Sep 17 00:00:00 2001 From: Ryan Date: Wed, 22 Sep 2021 02:21:10 +1000 Subject: [PATCH 055/595] Remove outputselect.h include from BIOI code (#14543) --- keyboards/bioi/ble.c | 1 - keyboards/bioi/main.c | 1 - 2 files changed, 2 deletions(-) diff --git a/keyboards/bioi/ble.c b/keyboards/bioi/ble.c index 6d1c24c3a1..d941f7c43d 100644 --- a/keyboards/bioi/ble.c +++ b/keyboards/bioi/ble.c @@ -31,7 +31,6 @@ along with this program. If not, see . #include "lufa.h" #include "quantum.h" #include -#include "outputselect.h" #include "print.h" diff --git a/keyboards/bioi/main.c b/keyboards/bioi/main.c index 14f0f8de7a..7c8922c0a0 100644 --- a/keyboards/bioi/main.c +++ b/keyboards/bioi/main.c @@ -33,7 +33,6 @@ along with this program. If not, see . #include "lufa.h" #include "quantum.h" #include -#include "outputselect.h" #ifdef NKRO_ENABLE #include "keycode_config.h" From d84794b35213fe95a712468c21ae4a4cad2795e3 Mon Sep 17 00:00:00 2001 From: Ryan Date: Wed, 22 Sep 2021 02:54:36 +1000 Subject: [PATCH 056/595] Remove keyboard-level `TAP_DANCE_ENABLE` rules (#14538) --- keyboards/9key/rules.mk | 1 - keyboards/aleth42/rev0/rules.mk | 1 - keyboards/aleth42/rev1/rules.mk | 1 - keyboards/bastardkb/skeletyl/rules.mk | 1 - keyboards/bastardkb/tbkmini/rules.mk | 1 - keyboards/handwired/aek64/rules.mk | 1 - keyboards/handwired/chiron/rules.mk | 1 - keyboards/handwired/concertina/64key/keymaps/default/rules.mk | 1 + keyboards/handwired/concertina/64key/rules.mk | 2 -- keyboards/handwired/k_numpad17/rules.mk | 1 - keyboards/handwired/myskeeb/keymaps/default/rules.mk | 1 + keyboards/handwired/myskeeb/rules.mk | 1 - keyboards/handwired/space_oddity/keymaps/default/rules.mk | 1 + keyboards/handwired/space_oddity/rules.mk | 3 +-- keyboards/handwired/terminus_mini/rules.mk | 1 - keyboards/laptreus/rules.mk | 1 - keyboards/le_chiffre/rules.mk | 1 - keyboards/lfkeyboards/lfk78/rules.mk | 1 - keyboards/lfkeyboards/lfk87/rules.mk | 1 - keyboards/lfkeyboards/lfkpad/rules.mk | 1 - keyboards/mt40/rules.mk | 1 - keyboards/nafuda/rules.mk | 2 -- keyboards/naked64/rules.mk | 1 - keyboards/ncc1701kb/rules.mk | 3 +-- keyboards/numatreus/rules.mk | 1 - keyboards/setta21/rules.mk | 1 - keyboards/tanuki/rules.mk | 1 - keyboards/themadnoodle/ncc1701kb/v2/rules.mk | 1 - keyboards/themadnoodle/noodlepad/rules.mk | 1 - keyboards/treadstone48/rules.mk | 1 - keyboards/ut472/rules.mk | 1 - keyboards/winkeyless/bminiex/rules.mk | 1 - keyboards/zfrontier/big_switch/rules.mk | 1 - 33 files changed, 5 insertions(+), 34 deletions(-) create mode 100644 keyboards/handwired/concertina/64key/keymaps/default/rules.mk create mode 100644 keyboards/handwired/myskeeb/keymaps/default/rules.mk create mode 100644 keyboards/handwired/space_oddity/keymaps/default/rules.mk diff --git a/keyboards/9key/rules.mk b/keyboards/9key/rules.mk index b71f32348c..4ac3080214 100644 --- a/keyboards/9key/rules.mk +++ b/keyboards/9key/rules.mk @@ -18,7 +18,6 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = yes # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. -TAP_DANCE_ENABLE = no # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/aleth42/rev0/rules.mk b/keyboards/aleth42/rev0/rules.mk index 94e5bb2788..52fc79e2b1 100644 --- a/keyboards/aleth42/rev0/rules.mk +++ b/keyboards/aleth42/rev0/rules.mk @@ -19,4 +19,3 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow ENCODER_ENABLE = yes -TAP_DANCE_ENABLE = no diff --git a/keyboards/aleth42/rev1/rules.mk b/keyboards/aleth42/rev1/rules.mk index d67ab1a680..134b0490c0 100644 --- a/keyboards/aleth42/rev1/rules.mk +++ b/keyboards/aleth42/rev1/rules.mk @@ -19,4 +19,3 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow ENCODER_ENABLE = yes -TAP_DANCE_ENABLE = no diff --git a/keyboards/bastardkb/skeletyl/rules.mk b/keyboards/bastardkb/skeletyl/rules.mk index abe5fe65b8..31aec2232e 100644 --- a/keyboards/bastardkb/skeletyl/rules.mk +++ b/keyboards/bastardkb/skeletyl/rules.mk @@ -22,7 +22,6 @@ RGB_MATRIX_ENABLE = yes # Enable keyboard RGB matrix (do not use together wi RGB_MATRIX_DRIVER = WS2812 # RGB matrix driver support AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD = yes -TAP_DANCE_ENABLE = no LTO_ENABLE = yes AUDIO_SUPPORTED = no diff --git a/keyboards/bastardkb/tbkmini/rules.mk b/keyboards/bastardkb/tbkmini/rules.mk index 690c3cb09a..009cb4bbc1 100644 --- a/keyboards/bastardkb/tbkmini/rules.mk +++ b/keyboards/bastardkb/tbkmini/rules.mk @@ -23,7 +23,6 @@ RGB_MATRIX_ENABLE = yes # Enable keyboard RGB matrix (do not use together wi RGB_MATRIX_DRIVER = WS2812 # RGB matrix driver support AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD = yes -TAP_DANCE_ENABLE = no LTO_ENABLE = yes AUDIO_SUPPORTED = no diff --git a/keyboards/handwired/aek64/rules.mk b/keyboards/handwired/aek64/rules.mk index e03827cde2..e4d6bd0d8b 100644 --- a/keyboards/handwired/aek64/rules.mk +++ b/keyboards/handwired/aek64/rules.mk @@ -16,6 +16,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover - not yet supported in LUFA UNICODE_ENABLE = yes # Enable support for arrow keys icon on the second layer. COMBO_ENABLE = yes # Enable combo for special function when using multiple keys at once. -TAP_DANCE_ENABLE = no # Enable use multiple tap NKRO_ENABLE = yes BACKLIGHT_ENABLE = yes diff --git a/keyboards/handwired/chiron/rules.mk b/keyboards/handwired/chiron/rules.mk index df40192473..8c89bbefe5 100644 --- a/keyboards/handwired/chiron/rules.mk +++ b/keyboards/handwired/chiron/rules.mk @@ -20,7 +20,6 @@ MOUSEKEY_ENABLE = yes NKRO_ENABLE = no RGBLIGHT_ENABLE = yes SLEEP_LED_ENABLE = yes -TAP_DANCE_ENABLE = no UCIS_ENABLE = no UNICODEMAP_ENABLE = no UNICODE_ENABLE = no diff --git a/keyboards/handwired/concertina/64key/keymaps/default/rules.mk b/keyboards/handwired/concertina/64key/keymaps/default/rules.mk new file mode 100644 index 0000000000..e5ddcae8d9 --- /dev/null +++ b/keyboards/handwired/concertina/64key/keymaps/default/rules.mk @@ -0,0 +1 @@ +TAP_DANCE_ENABLE = yes diff --git a/keyboards/handwired/concertina/64key/rules.mk b/keyboards/handwired/concertina/64key/rules.mk index 1659be4139..4dde08b00b 100644 --- a/keyboards/handwired/concertina/64key/rules.mk +++ b/keyboards/handwired/concertina/64key/rules.mk @@ -20,5 +20,3 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output - -TAP_DANCE_ENABLE = yes diff --git a/keyboards/handwired/k_numpad17/rules.mk b/keyboards/handwired/k_numpad17/rules.mk index 89b4183833..03c9c27823 100644 --- a/keyboards/handwired/k_numpad17/rules.mk +++ b/keyboards/handwired/k_numpad17/rules.mk @@ -17,6 +17,5 @@ RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no UNICODE_ENABLE = no # Unicode -TAP_DANCE_ENABLE = no LAYOUTS = numpad_5x4 diff --git a/keyboards/handwired/myskeeb/keymaps/default/rules.mk b/keyboards/handwired/myskeeb/keymaps/default/rules.mk new file mode 100644 index 0000000000..e5ddcae8d9 --- /dev/null +++ b/keyboards/handwired/myskeeb/keymaps/default/rules.mk @@ -0,0 +1 @@ +TAP_DANCE_ENABLE = yes diff --git a/keyboards/handwired/myskeeb/rules.mk b/keyboards/handwired/myskeeb/rules.mk index 893d364263..10ade1f090 100644 --- a/keyboards/handwired/myskeeb/rules.mk +++ b/keyboards/handwired/myskeeb/rules.mk @@ -23,4 +23,3 @@ SPLIT_KEYBOARD = yes # Enables split keyboard support OLED_ENABLE = yes OLED_DRIVER = SSD1306 NO_USB_STARTUP_CHECK = yes -TAP_DANCE_ENABLE = yes diff --git a/keyboards/handwired/space_oddity/keymaps/default/rules.mk b/keyboards/handwired/space_oddity/keymaps/default/rules.mk new file mode 100644 index 0000000000..e5ddcae8d9 --- /dev/null +++ b/keyboards/handwired/space_oddity/keymaps/default/rules.mk @@ -0,0 +1 @@ +TAP_DANCE_ENABLE = yes diff --git a/keyboards/handwired/space_oddity/rules.mk b/keyboards/handwired/space_oddity/rules.mk index 70b2151a3f..f55552ad89 100644 --- a/keyboards/handwired/space_oddity/rules.mk +++ b/keyboards/handwired/space_oddity/rules.mk @@ -17,5 +17,4 @@ NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no RGBLIGHT_ENABLE = no -TAP_DANCE_ENABLE = yes -DYNAMIC_MACRO_ENABLE = yes \ No newline at end of file +DYNAMIC_MACRO_ENABLE = yes diff --git a/keyboards/handwired/terminus_mini/rules.mk b/keyboards/handwired/terminus_mini/rules.mk index 73e43c5ce8..20ffaa787c 100644 --- a/keyboards/handwired/terminus_mini/rules.mk +++ b/keyboards/handwired/terminus_mini/rules.mk @@ -20,4 +20,3 @@ UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -TAP_DANCE_ENABLE = no # Enable tap dance diff --git a/keyboards/laptreus/rules.mk b/keyboards/laptreus/rules.mk index 5810f98a57..f71fa588b3 100644 --- a/keyboards/laptreus/rules.mk +++ b/keyboards/laptreus/rules.mk @@ -20,7 +20,6 @@ NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: ht #BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode KEY_LOCK_ENABLE = no -TAP_DANCE_ENABLE = no # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/le_chiffre/rules.mk b/keyboards/le_chiffre/rules.mk index e683fb1ff0..6a3b3895fa 100644 --- a/keyboards/le_chiffre/rules.mk +++ b/keyboards/le_chiffre/rules.mk @@ -10,7 +10,6 @@ EXTRAKEY_ENABLE = yes # Audio control and System control SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -TAP_DANCE_ENABLE = no ENCODER_ENABLE = yes OLED_ENABLE = no RGB_MATRIX_ENABLE = yes diff --git a/keyboards/lfkeyboards/lfk78/rules.mk b/keyboards/lfkeyboards/lfk78/rules.mk index 5711e89a68..328fe1fb98 100644 --- a/keyboards/lfkeyboards/lfk78/rules.mk +++ b/keyboards/lfkeyboards/lfk78/rules.mk @@ -17,7 +17,6 @@ UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lfkeyboards, not qmk base SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -TAP_DANCE_ENABLE = no ISSI_ENABLE = yes # If the I2C pullup resistors aren't install this must be disabled WATCHDOG_ENABLE = no # Resets keyboard if matrix_scan isn't run every 250ms diff --git a/keyboards/lfkeyboards/lfk87/rules.mk b/keyboards/lfkeyboards/lfk87/rules.mk index 44b8a4111a..aed5c8551e 100644 --- a/keyboards/lfkeyboards/lfk87/rules.mk +++ b/keyboards/lfkeyboards/lfk87/rules.mk @@ -37,7 +37,6 @@ UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable RGB underlight RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lefkeyboards, not WS2812 SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend -TAP_DANCE_ENABLE = no ISSI_ENABLE = yes # If the I2C pullup resistors aren't install this must be disabled WATCHDOG_ENABLE = no # Resets keyboard if matrix_scan isn't run every 250ms diff --git a/keyboards/lfkeyboards/lfkpad/rules.mk b/keyboards/lfkeyboards/lfkpad/rules.mk index f166436c97..7de23ce90c 100644 --- a/keyboards/lfkeyboards/lfkpad/rules.mk +++ b/keyboards/lfkeyboards/lfkpad/rules.mk @@ -21,7 +21,6 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lfkeyboards, not qmk base AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode -TAP_DANCE_ENABLE = no ISSI_ENABLE = yes # If the I2C pullup resistors aren't installed this must be disabled WATCHDOG_ENABLE = no # Resets keyboard if matrix_scan() isn't run every 250ms diff --git a/keyboards/mt40/rules.mk b/keyboards/mt40/rules.mk index 61dc118cf9..68e8d09ab1 100644 --- a/keyboards/mt40/rules.mk +++ b/keyboards/mt40/rules.mk @@ -16,7 +16,6 @@ AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. WS2812_DRIVER = i2c -TAP_DANCE_ENABLE = no LAYOUTS = planck_mit LAYOUTS_HAS_RGB = no diff --git a/keyboards/nafuda/rules.mk b/keyboards/nafuda/rules.mk index b12f2e7df1..e2c48f3760 100644 --- a/keyboards/nafuda/rules.mk +++ b/keyboards/nafuda/rules.mk @@ -17,8 +17,6 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. -TAP_DANCE_ENABLE = no OLED_ENABLE = no # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - diff --git a/keyboards/naked64/rules.mk b/keyboards/naked64/rules.mk index baa7df308f..ae6a1b69b4 100644 --- a/keyboards/naked64/rules.mk +++ b/keyboards/naked64/rules.mk @@ -17,7 +17,6 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. -TAP_DANCE_ENABLE = no OLED_ENABLE = no USE_I2C = no # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/ncc1701kb/rules.mk b/keyboards/ncc1701kb/rules.mk index 19106badd5..46d10a1f92 100644 --- a/keyboards/ncc1701kb/rules.mk +++ b/keyboards/ncc1701kb/rules.mk @@ -20,5 +20,4 @@ BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = yes # Unicode -TAP_DANCE_ENABLE = no -ENCODER_ENABLE = yes \ No newline at end of file +ENCODER_ENABLE = yes diff --git a/keyboards/numatreus/rules.mk b/keyboards/numatreus/rules.mk index 1dd016ab0d..ce93d2ef34 100644 --- a/keyboards/numatreus/rules.mk +++ b/keyboards/numatreus/rules.mk @@ -15,7 +15,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work #BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = yes # Unicode -#TAP_DANCE_ENABLE = yes RGBLIGHT_ENABLE = no LED_ANIMATIONS = no diff --git a/keyboards/setta21/rules.mk b/keyboards/setta21/rules.mk index 8e723b0ff7..9f598e457d 100644 --- a/keyboards/setta21/rules.mk +++ b/keyboards/setta21/rules.mk @@ -17,7 +17,6 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. -TAP_DANCE_ENABLE = no OLED_ENABLE = no USE_I2C = no # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/tanuki/rules.mk b/keyboards/tanuki/rules.mk index 70d1a73816..92e3a57c82 100644 --- a/keyboards/tanuki/rules.mk +++ b/keyboards/tanuki/rules.mk @@ -17,4 +17,3 @@ RGBLIGHT_ENABLE =yes # Enable keyboard underlight functionality BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no UNICODE_ENABLE = no # Unicode -TAP_DANCE_ENABLE = no diff --git a/keyboards/themadnoodle/ncc1701kb/v2/rules.mk b/keyboards/themadnoodle/ncc1701kb/v2/rules.mk index 758ae3594d..ee03434e2b 100644 --- a/keyboards/themadnoodle/ncc1701kb/v2/rules.mk +++ b/keyboards/themadnoodle/ncc1701kb/v2/rules.mk @@ -20,5 +20,4 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = yes # Unicode -TAP_DANCE_ENABLE = no ENCODER_ENABLE = yes diff --git a/keyboards/themadnoodle/noodlepad/rules.mk b/keyboards/themadnoodle/noodlepad/rules.mk index 758ae3594d..ee03434e2b 100644 --- a/keyboards/themadnoodle/noodlepad/rules.mk +++ b/keyboards/themadnoodle/noodlepad/rules.mk @@ -20,5 +20,4 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = yes # Unicode -TAP_DANCE_ENABLE = no ENCODER_ENABLE = yes diff --git a/keyboards/treadstone48/rules.mk b/keyboards/treadstone48/rules.mk index fa67c4f8c9..e60d3dd50f 100644 --- a/keyboards/treadstone48/rules.mk +++ b/keyboards/treadstone48/rules.mk @@ -20,7 +20,6 @@ AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD = yes MOUSEKEY_ENABLE = yes # Mouse keys -TAP_DANCE_ENABLE = no RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow OLED_ENABLE = yes diff --git a/keyboards/ut472/rules.mk b/keyboards/ut472/rules.mk index 66a0946e0e..48b730df25 100644 --- a/keyboards/ut472/rules.mk +++ b/keyboards/ut472/rules.mk @@ -20,4 +20,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes -TAP_DANCE_ENABLE = no # Enable tap dance feature diff --git a/keyboards/winkeyless/bminiex/rules.mk b/keyboards/winkeyless/bminiex/rules.mk index 3ca89a0b9d..f10c10e85f 100644 --- a/keyboards/winkeyless/bminiex/rules.mk +++ b/keyboards/winkeyless/bminiex/rules.mk @@ -14,7 +14,6 @@ COMMAND_ENABLE = no BACKLIGHT_ENABLE = yes RGBLIGHT_ENABLE = yes WS2812_DRIVER = i2c -TAP_DANCE_ENABLE = no # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/zfrontier/big_switch/rules.mk b/keyboards/zfrontier/big_switch/rules.mk index 762dab69e8..34c22e920f 100644 --- a/keyboards/zfrontier/big_switch/rules.mk +++ b/keyboards/zfrontier/big_switch/rules.mk @@ -19,4 +19,3 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -TAP_DANCE_ENABLE = no From 8d32ddd8e948136a992ab3c10d13c7dbf9e1e119 Mon Sep 17 00:00:00 2001 From: Phil Pirozhkov Date: Wed, 22 Sep 2021 00:07:55 +0300 Subject: [PATCH 057/595] [Keyboard] gBoards GergoPlex (#13027) * Moved gergoplex to seperate PR * vendor + cformat * Update keyboards/gboards/k/gergoplex/matrix.c Co-Authored-By: Drashna Jaelre * lifiting keyboards up * Update readme.md * Update keyboards/gboards/gergoplex/config.h Co-authored-by: Drashna Jaelre * remove English dicts * cformatted * Prettify keymap * Remove via keymaps Via doesn't support chords/combos, and this makes the keymap on such a small keyboard quite uncomfortable and incomplete. * Address QMK pull code review notes * Cleanup (tabs, excessive comments) * Fix keymap typos * Use enum to define layers * Multiple changes - got rid of LAYOUT_kc in favour of LAYOUT_split_3x5_3 - fixed matrix custom C code to build with updated external dependencies (gcc) - fixed used combo docs keyboards/gboards/gergoplex/matrix.c:189:9: error: implicit declaration of function 'phex' [-Werror=implicit-function-declaration] phex(row); ^~~~ keyboards/gboards/gergoplex/matrix.c:191:9: error: implicit declaration of function 'pbin_reverse16'; did you mean 'print_bin_reverse16'? [-Werror=implicit-function-declaration] pbin_reverse16(matrix_get_row(row)); * Remove apparently redundant macros * Replace direct pin control with IO functions * config mouse enable and combo delay fix The default delay is 200: #define COMBO_TERM 200 how long for the Combo keys to be detected. Defaults to TAPPING_TERM if not defined. tmk_core/common/action_tapping.h|22| 13:# define TAPPING_TERM 200 * Remove redundant defines * Unambiguously refer to the Special layer * Fix formatting * gboards/gergoplex set IGNORE_MOD_TAP_INTERRUPT This solves my issue was with KC_CTL_A working correctly and it was set in @germ's repo https://github.com/germ/qmk_firmware/blob/39c86e080dc04b68ee08387dcb5144c88cb44855/keyboards/gboards/k/gergoplex/config.h#L49 https://beta.docs.qmk.fm/using-qmk/software-features/tap_hold#ignore-mod-tap-interrupt * Name change See commit 581368596ed * Wording change * Update keyboards/gboards/gergoplex/keymaps/default/keymap.c Co-authored-by: Drashna Jaelre * Add copyright headers * Fix debounce type | avr-gcc: error: .build/obj_gboards_gergoplex_default/quantum/debounce/eager_pr.o: No such file or directory * Implement colemak-dhm keymap Co-authored-by: Germ Co-authored-by: Drashna Jaelre Co-authored-by: Brian Tannous --- .../gboards/combos/colemakdhm-vim-helpers.def | 9 + keyboards/gboards/gergoplex/config.h | 52 ++++ keyboards/gboards/gergoplex/gergoplex.c | 68 +++++ keyboards/gboards/gergoplex/gergoplex.h | 56 ++++ .../gergoplex/keymaps/colemak-dhm/combos.def | 10 + .../keymaps/colemak-dhm/gergoplex.def | 11 + .../gergoplex/keymaps/colemak-dhm/keymap.c | 99 +++++++ .../gergoplex/keymaps/colemak-dhm/rules.mk | 17 ++ .../gergoplex/keymaps/default/combos.def | 11 + .../gergoplex/keymaps/default/gergoplex.def | 10 + .../gergoplex/keymaps/default/keymap.c | 113 ++++++++ .../gergoplex/keymaps/default/rules.mk | 17 ++ keyboards/gboards/gergoplex/matrix.c | 241 ++++++++++++++++++ keyboards/gboards/gergoplex/readme.md | 43 ++++ keyboards/gboards/gergoplex/rules.mk | 18 ++ 15 files changed, 775 insertions(+) create mode 100644 keyboards/gboards/combos/colemakdhm-vim-helpers.def create mode 100644 keyboards/gboards/gergoplex/config.h create mode 100644 keyboards/gboards/gergoplex/gergoplex.c create mode 100644 keyboards/gboards/gergoplex/gergoplex.h create mode 100644 keyboards/gboards/gergoplex/keymaps/colemak-dhm/combos.def create mode 100644 keyboards/gboards/gergoplex/keymaps/colemak-dhm/gergoplex.def create mode 100644 keyboards/gboards/gergoplex/keymaps/colemak-dhm/keymap.c create mode 100644 keyboards/gboards/gergoplex/keymaps/colemak-dhm/rules.mk create mode 100644 keyboards/gboards/gergoplex/keymaps/default/combos.def create mode 100644 keyboards/gboards/gergoplex/keymaps/default/gergoplex.def create mode 100644 keyboards/gboards/gergoplex/keymaps/default/keymap.c create mode 100644 keyboards/gboards/gergoplex/keymaps/default/rules.mk create mode 100644 keyboards/gboards/gergoplex/matrix.c create mode 100644 keyboards/gboards/gergoplex/readme.md create mode 100644 keyboards/gboards/gergoplex/rules.mk diff --git a/keyboards/gboards/combos/colemakdhm-vim-helpers.def b/keyboards/gboards/combos/colemakdhm-vim-helpers.def new file mode 100644 index 0000000000..f4950be05b --- /dev/null +++ b/keyboards/gboards/combos/colemakdhm-vim-helpers.def @@ -0,0 +1,9 @@ +// Vim-Mode combos + +COMB(wfEsc, KC_ESC, KC_W, KC_F) +COMB(rsBspc, KC_BSPC, KC_R, KC_S) +COMB(stTab, KC_TAB, KC_S, KC_T) +COMB(cdEnt, KC_ENT, KC_C, KC_D) +COMB(luEsc, KC_ESC, KC_L, KC_U) +COMB(neCol, KC_COLN, KC_N, KC_E) +COMB(mkEnt, KC_ENT, KC_M, KC_K) diff --git a/keyboards/gboards/gergoplex/config.h b/keyboards/gboards/gergoplex/config.h new file mode 100644 index 0000000000..a6d8d6b1be --- /dev/null +++ b/keyboards/gboards/gergoplex/config.h @@ -0,0 +1,52 @@ +/* +Copyright 2012 Jun Wako +Copyright 2013 Oleg Kostyuk + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +// Copy and worked on with love from the EZ team + +#pragma once +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x6B0A +#define PRODUCT_ID 0x0002 +#define DEVICE_VER 0x0001 +#define MANUFACTURER g Heavy Industries +#define PRODUCT GergoPlex + +/* key matrix size */ +#define MATRIX_ROWS 10 +#define MATRIX_ROWS_PER_SIDE (MATRIX_ROWS / 2) +#define MATRIX_COLS 4 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + */ +#define MATRIX_ROW_PINS { F6, F5, F4, F1 } +#define MATRIX_COL_PINS { B1, B2, B3, D2, D3 } +#define UNUSED_PINS +#define IGNORE_MOD_TAP_INTERRUPT +#define COMBO_ALLOW_ACTION_KEYS +#define COMBO_VARIABLE_LEN + +#define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || get_mods() == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT))) + +#define DEBOUNCE 5 diff --git a/keyboards/gboards/gergoplex/gergoplex.c b/keyboards/gboards/gergoplex/gergoplex.c new file mode 100644 index 0000000000..1e44583895 --- /dev/null +++ b/keyboards/gboards/gergoplex/gergoplex.c @@ -0,0 +1,68 @@ +/* Copyright 2021 Jane Bernhardt + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "gergoplex.h" + +bool i2c_initialized = 0; +i2c_status_t mcp23018_status = 0x20; + +void matrix_init_kb(void) { + matrix_init_user(); +} + +uint8_t init_mcp23018(void) { + print("starting init"); + mcp23018_status = 0x20; + + // I2C subsystem + + if (i2c_initialized == 0) { + i2c_init(); // on pins D(1,0) + i2c_initialized = true; + _delay_ms(1000); + } + + // set pin direction + // - unused : input : 1 + // - input : input : 1 + // - driving : output : 0 + mcp23018_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT); + if (mcp23018_status) goto out; + mcp23018_status = i2c_write(IODIRA, I2C_TIMEOUT); + if (mcp23018_status) goto out; + mcp23018_status = i2c_write(0b11000001, I2C_TIMEOUT); + if (mcp23018_status) goto out; + mcp23018_status = i2c_write(0b11111111, I2C_TIMEOUT); + if (mcp23018_status) goto out; + i2c_stop(); + + // set pull-up + // - unused : on : 1 + // - input : on : 1 + // - driving : off : 0 + mcp23018_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT); + if (mcp23018_status) goto out; + mcp23018_status = i2c_write(GPPUA, I2C_TIMEOUT); + if (mcp23018_status) goto out; + mcp23018_status = i2c_write(0b11000001, I2C_TIMEOUT); + if (mcp23018_status) goto out; + mcp23018_status = i2c_write(0b11111111, I2C_TIMEOUT); + if (mcp23018_status) goto out; + +out: + i2c_stop(); + return mcp23018_status; +} diff --git a/keyboards/gboards/gergoplex/gergoplex.h b/keyboards/gboards/gergoplex/gergoplex.h new file mode 100644 index 0000000000..507072a376 --- /dev/null +++ b/keyboards/gboards/gergoplex/gergoplex.h @@ -0,0 +1,56 @@ +/* Copyright 2021 Jane Bernhardt + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" +#include "i2c_master.h" + +extern i2c_status_t mcp23018_status; +#define I2C_TIMEOUT 1000 +#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n)) +#define CPU_16MHz 0x00 + +// I2C aliases and register addresses (see "mcp23018.md") +#define I2C_ADDR 0x20 // 0b0100000 +#define I2C_ADDR_WRITE ((I2C_ADDR << 1) | I2C_WRITE) +#define I2C_ADDR_READ ((I2C_ADDR << 1) | I2C_READ) +#define IODIRA 0x00 // i/o direction register +#define IODIRB 0x01 +#define GPPUA 0x0C // GPIO pull-up resistor register +#define GPIOA 0x12 // general purpose i/o port register (write modifies OLAT) +#define OLATA 0x14 // output latch register + +uint8_t init_mcp23018(void); + +#define LAYOUT_split_3x5_3( \ + L00, L01, L02, L03, L04, R00, R01, R02, R03, R04, \ + L10, L11, L12, L13, L14, R10, R11, R12, R13, R14, \ + L20, L21, L22, L23, L24, R20, R21, R22, R23, R24, \ + L30, L31, L32, R30, R31, R32 \ + ) \ + { \ + {L04, L14, L24, KC_NO}, \ + {L03, L13, L23, L32}, \ + {L02, L12, L22, L31}, \ + {L01, L11, L21, L30}, \ + {L00, L10, L20, KC_NO}, \ + {R00, R10, R20, KC_NO}, \ + {R01, R11, R21, R30}, \ + {R02, R12, R22, R31}, \ + {R03, R13, R23, R32}, \ + {R04, R14, R24, KC_NO}, \ + } diff --git a/keyboards/gboards/gergoplex/keymaps/colemak-dhm/combos.def b/keyboards/gboards/gergoplex/keymaps/colemak-dhm/combos.def new file mode 100644 index 0000000000..2aac5cb4ff --- /dev/null +++ b/keyboards/gboards/gergoplex/keymaps/colemak-dhm/combos.def @@ -0,0 +1,10 @@ +// List any combo dictionaries you want loaded to your device below! + +// User includes +#include "gergoplex.def" + +// QMK wide includes +#include "combos/colemakdhm-vim-helpers.def" + +// Word completion +// #include "combos/eng-combos.def" diff --git a/keyboards/gboards/gergoplex/keymaps/colemak-dhm/gergoplex.def b/keyboards/gboards/gergoplex/keymaps/colemak-dhm/gergoplex.def new file mode 100644 index 0000000000..7ed0122c4b --- /dev/null +++ b/keyboards/gboards/gergoplex/keymaps/colemak-dhm/gergoplex.def @@ -0,0 +1,11 @@ +// Gergoplex colemak-dhm specfic combos +COMB(osBacksl, KC_BSLS, KC_Y, KC_SCLN) +COMB(mnLess, KC_LT, KC_M, KC_N) +COMB(eiGreat, KC_GT, KC_E, KC_I) +COMB(xcDash, KC_MINS, KC_X, KC_C) +COMB(hcUnds, KC_UNDS, KC_H, KC_COMM) +COMB(khQuot, KC_QUOT, KC_K, KC_H) +COMB(gvClic, KC_BTN1, KC_G, KC_V) +COMB(tdClic, KC_BTN2, KC_T, KC_D) + +SUBS(pasta, "I would just like to interject for a moment.", KC_H, KC_J, KC_K, KC_L) diff --git a/keyboards/gboards/gergoplex/keymaps/colemak-dhm/keymap.c b/keyboards/gboards/gergoplex/keymaps/colemak-dhm/keymap.c new file mode 100644 index 0000000000..ec2c17f8bc --- /dev/null +++ b/keyboards/gboards/gergoplex/keymaps/colemak-dhm/keymap.c @@ -0,0 +1,99 @@ +/* Good on you for modifying your layout! if you don't have + * time to read the QMK docs, a list of keycodes can be found at + * https://github.com/qmk/qmk_firmware/blob/master/docs/keycodes.md + */ + +#include "gergoplex.h" +#include "g/keymap_combo.h" + +enum { + _ALPHA, // default (Colemak DHm) + _SPECIAL, // special characters + _NUMBERS // numbers/function/motion +}; + +// alpha hold modifiers +#define KC_CTL_A MT(MOD_LCTL, KC_A) // Tap for A, hold for Control +#define KC_CTL_O MT(MOD_RCTL, KC_O) // Tap for colon, hold for Control +#define KC_SFT_Z MT(MOD_LSFT, KC_Z) // Tap for Z, hold for Shift +#define KC_SFT_SL MT(MOD_RSFT, KC_SLSH) // Tap for slash, hold for Shift + +// thumb modifiers/toggles +#define KC_GUI_ESC MT(MOD_LGUI, KC_ESC) // Tap for Esc, hold for GUI (Meta, Command, Win) +#define KC_ALT_ENT MT(MOD_LALT, KC_ENT) // Tap for Enter, hold for Alt (Option) +#define KC_SPE_SPC LT(_SPECIAL, KC_SPC) // Tap for Space, hold for Special layer +#define KC_NUM_SPC LT(_NUMBERS, KC_SPC) // Tap for Space, hold for Numbers layer +#define KC_SFT_TAB MT(MOD_RSFT, KC_TAB) // Tap for Tab, hold for Right Shift + + /* Combomap + * + * ,-------------------------------. ,-------------------------------. + * | | ESC | | | | | ESC | \ | + * |-------+-----+-----+-----+-----| |-----+-----+-----+-----+-------| + * | | BSPC TAB | | | < : > | | + * |-------+-----+-----+-RMB-+-LMB-| |ENTER+-----+-----+-----+-------| + * | | - ENTER | | | ' _ | | | + * `-------------------------------' `-------------------------------' + * .-----------------. .-----------------. + * | | | | | | | | + * '-----------------' '-----------------' + */ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap 0: Alpha layer / Colemak DHm + * + * ,-------------------------------. ,-------------------------------. + * | Q | W | F | P | B | | J | L | U | Y | ; | + * |-------+-----+-----+-----+-----| |-----+-----+-----+-----+-------| + * | CTRL A| R | S | T | G | | M | N | E | I | O | + * |-------+-----+-----+-----+-----| |-----+-----+-----+-----+-------| + * | SHFT Z| X | C | D | V | | K | H | < | > |SHFT / | + * `-------------------------------' `-------------------------------' + * .------------------------------. .----------------------. + * | ESC META | ENT ALT | SPC SPE | | SPC NUM | SHFT | TAB | + * '------------------------------' '----------------------' + */ + [_ALPHA] = LAYOUT_split_3x5_3( + KC_Q, KC_W, KC_F, KC_P, KC_B, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, + KC_CTL_A, KC_R, KC_S, KC_T, KC_G, KC_M, KC_N, KC_E, KC_I, KC_CTL_O, + KC_SFT_Z, KC_X, KC_C, KC_D, KC_V, KC_K, KC_H, KC_COMMA, KC_DOT, KC_SFT_SL, + KC_GUI_ESC, KC_ALT_ENT, KC_SPE_SPC, KC_NUM_SPC, KC_LSFT, KC_SFT_TAB), + + /* Keymap 1: Special characters layer + * + * ,-------------------------------. ,-------------------------------. + * | ! | @ | { | } | | | | ` | ~ | | | \ | + * |-------+-----+-----+-----+-----| |-----+-----+-----+-----+-------| + * | # | $ | ( | ) | RMB | | + | - | / | * | ' | + * |-------+-----+-----+-----+-----| |-----+-----+-----+-----+-------| + * | % | ^ | [ | ] | LMB | | & | = | , | . | - | + * `-------------------------------' `-------------------------------' + * .-------------------------. .-----------------. + * | ComboToggle | ; | = | | = | ; | DEL | + * '-------------------------' '-----------------' + */ + [_SPECIAL] = LAYOUT_split_3x5_3( + KC_EXLM, KC_AT, KC_LCBR, KC_RCBR, KC_PIPE, KC_GRV, KC_TILD, KC_TRNS, KC_TRNS, KC_BSLS, + KC_HASH, KC_DLR, KC_LPRN, KC_RPRN, KC_BTN2, KC_PLUS, KC_MINS, KC_SLSH, KC_ASTR, KC_QUOT, + KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_BTN1, KC_AMPR, KC_EQL, KC_COMM, KC_DOT, KC_MINS, + CMB_TOG, KC_SCLN, KC_EQL, KC_EQL, KC_SCLN, KC_DEL), + + /* Keymap 2: Numbers/Function/Motion layer + * + * ,-------------------------------. ,-------------------------------. + * | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | + * |-------+-----+-----+-----+-----| |-----+-----+-----+-----+-------| + * | F1 | F2 | F3 | F4 | F5 | | LFT | DWN | UP | RGT | VOLUP | + * |-------+-----+-----+-----+-----| |-----+-----+-----+-----+-------| + * | F6 | F7 | F8 | F9 | F10 | | MLFT| MDWN| MUP | MRGT| VOLDN | + * `-------------------------------' `-------------------------------' + * .-----------------. .-----------------. + * | F11 | F12 | | | | PLY | SKP | + * '-----------------' '-----------------' + */ + [_NUMBERS] = LAYOUT_split_3x5_3( + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_VOLU, + KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, KC_VOLD, + KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_MPLY, KC_MNXT) +}; diff --git a/keyboards/gboards/gergoplex/keymaps/colemak-dhm/rules.mk b/keyboards/gboards/gergoplex/keymaps/colemak-dhm/rules.mk new file mode 100644 index 0000000000..e882b8008d --- /dev/null +++ b/keyboards/gboards/gergoplex/keymaps/colemak-dhm/rules.mk @@ -0,0 +1,17 @@ +#---------------------------------------------------------------------------- +# make gboards/gergoplex:default:flash +# Make sure you have dfu-programmer installed! +#---------------------------------------------------------------------------- + +#Debug options +VERBOSE = no +DEBUG_MATRIX_SCAN_RATE = no +DEBUG_MATRIX = no +CONSOLE_ENABLE = no + +#Combos! +VPATH += keyboards/gboards/ + +ifeq ($(strip $(DEBUG_MATRIX)), yes) + OPT_DEFS += -DDEBUG_MATRIX +endif diff --git a/keyboards/gboards/gergoplex/keymaps/default/combos.def b/keyboards/gboards/gergoplex/keymaps/default/combos.def new file mode 100644 index 0000000000..97ea961e6e --- /dev/null +++ b/keyboards/gboards/gergoplex/keymaps/default/combos.def @@ -0,0 +1,11 @@ +// List any combo dictionaries you want loaded to your device below! + +// QMK wide includes +#include "combos/germ-vim-helpers.def" +#include "combos/germ-mouse-keys.def" + +// User includes +#include "gergoplex.def" + +// Word completion +// #include "combos/eng-combos.def" diff --git a/keyboards/gboards/gergoplex/keymaps/default/gergoplex.def b/keyboards/gboards/gergoplex/keymaps/default/gergoplex.def new file mode 100644 index 0000000000..6e50571b5b --- /dev/null +++ b/keyboards/gboards/gergoplex/keymaps/default/gergoplex.def @@ -0,0 +1,10 @@ +// Gergoplex specfic combos + +COMB(opBacksl, KC_BSLS, KC_O, KC_P) +COMB(hjLess, KC_LT, KC_H, KC_J) +COMB(klGreat, KC_GT, KC_K, KC_L) +COMB(xcDash, KC_MINS, KC_X, KC_C) +COMB(mcUnds, KC_UNDS, KC_M, KC_COMM) +COMB(nmQuot, KC_QUOT, KC_N, KC_M) + +SUBS(pasta, "I'd just like to interject for a moment.", KC_H, KC_J, KC_K, KC_L) diff --git a/keyboards/gboards/gergoplex/keymaps/default/keymap.c b/keyboards/gboards/gergoplex/keymaps/default/keymap.c new file mode 100644 index 0000000000..c632751204 --- /dev/null +++ b/keyboards/gboards/gergoplex/keymaps/default/keymap.c @@ -0,0 +1,113 @@ +/* Copyright 2021 Jane Bernhardt + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +/* Good on you for modifying your layout! if you don't have + * time to read the QMK docs, a list of keycodes can be found at + * https://github.com/qmk/qmk_firmware/blob/master/docs/keycodes.md + */ + +#include QMK_KEYBOARD_H +#include "g/keymap_combo.h" + +enum { + _ALPHA, // default + _SPECIAL, // special characters + _NUMBERS // numbers/function/motion +}; + +#define KC_CTL_A MT(MOD_LCTL, KC_A) // Tap for A, hold for Control +#define KC_CTL_CL MT(MOD_LCTL, KC_SCLN) // Tap for colon, hold for Control +#define KC_SFT_Z MT(MOD_RSFT, KC_Z) // Tap for Z, hold for Shift +#define KC_SFT_SL MT(MOD_RSFT, KC_SLSH) // Tap for slash, hold for Shift + +#define KC_GUI_ESC MT(MOD_LGUI, KC_ESC) // Tap for Esc, hold for GUI (Meta, Command, Win) +#define KC_ALT_ENT MT(MOD_LALT, KC_ENT) // Tap for Enter, hold for Alt (Option) +#define KC_SPE_SPC LT(_SPECIAL, KC_SPC) // Tap for Space, hold for Special layer +#define KC_NUM_SPC LT(_NUMBERS, KC_SPC) // Tap for Space, hold for Numbers layer +#define KC_SFT_TAB MT(MOD_RSFT, KC_TAB) // Tap for Tab, hold for Right Shift + + /* Combomap + * + * ,-------------------------------. ,-------------------------------. + * | | ESC | | | | | ESC | \ | + * |-------+-----+-----+-----+-----| |-----+-----+-----+-----+-------| + * | | BSPC TAB | | | < : > | | + * |-------+-----+-----+-RMB-+-LMB-| |ENTER+-----+-----+-----+-------| + * | | - ENTER | | | ' _ | | | + * `-------------------------------' `-------------------------------' + * .-----------------. .-----------------. + * | | | | | | | | + * '-----------------' '-----------------' + */ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap 0: Alpha layer + * + * ,-------------------------------. ,-------------------------------. + * | Q | W | E | R | T | | Y | U | I | O | P | + * |-------+-----+-----+-----+-----| |-----+-----+-----+-----+-------| + * | CTRL A| S | D | F | G | | H | J | K | L |CTRL ; | + * |-------+-----+-----+-----+-----| |-----+-----+-----+-----+-------| + * | SHFT Z| X | C | V | B | | N | M | < | > |SHFT / | + * `-------------------------------' `-------------------------------' + * .------------------------------. .----------------------. + * | ESC META | ENT ALT | SPC SPE | | SPC NUM | SHFT | TAB | + * '------------------------------' '----------------------' + */ + [_ALPHA] = LAYOUT_split_3x5_3( + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, + KC_CTL_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_CTL_CL, + KC_SFT_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMMA, KC_DOT, KC_SFT_SL, + KC_GUI_ESC, KC_ALT_ENT, KC_SPE_SPC, KC_NUM_SPC, KC_LSFT, KC_SFT_TAB), + + /* Keymap 1: Special characters layer + * + * ,-------------------------------. ,-------------------------------. + * | ! | @ | { | } | | | | ` | ~ | | | \ | + * |-------+-----+-----+-----+-----| |-----+-----+-----+-----+-------| + * | # | $ | ( | ) | RMB | | + | - | / | * | ' | + * |-------+-----+-----+-----+-----| |-----+-----+-----+-----+-------| + * | % | ^ | [ | ] | LMB | | & | = | , | . | - | + * `-------------------------------' `-------------------------------' + * .-------------------------. .-----------------. + * | ComboToggle | ; | = | | = | ; | DEL | + * '-------------------------' '-----------------' + */ + [_SPECIAL] = LAYOUT_split_3x5_3( + KC_EXLM, KC_AT, KC_LCBR, KC_RCBR, KC_PIPE, KC_GRV, KC_TILD, KC_TRNS, KC_TRNS, KC_BSLS, + KC_HASH, KC_DLR, KC_LPRN, KC_RPRN, KC_BTN2, KC_PLUS, KC_MINS, KC_SLSH, KC_ASTR, KC_QUOT, + KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_BTN1, KC_AMPR, KC_EQL, KC_COMM, KC_DOT, KC_MINS, + CMB_TOG, KC_SCLN, KC_EQL, KC_EQL, KC_SCLN, KC_DEL), + + /* Keymap 2: Numbers/Function/Motion layer + * + * ,-------------------------------. ,-------------------------------. + * | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | + * |-------+-----+-----+-----+-----| |-----+-----+-----+-----+-------| + * | F1 | F2 | F3 | F4 | F5 | | LFT | DWN | UP | RGT | VOLUP | + * |-------+-----+-----+-----+-----| |-----+-----+-----+-----+-------| + * | F6 | F7 | F8 | F9 | F10 | | MLFT| MDWN| MUP | MRGT| VOLDN | + * `-------------------------------' `-------------------------------' + * .-----------------. .-----------------. + * | F11 | F12 | | | | PLY | SKP | + * '-----------------' '-----------------' + */ + [_NUMBERS] = LAYOUT_split_3x5_3( + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_VOLU, + KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, KC_VOLD, + KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_MPLY, KC_MNXT) +}; diff --git a/keyboards/gboards/gergoplex/keymaps/default/rules.mk b/keyboards/gboards/gergoplex/keymaps/default/rules.mk new file mode 100644 index 0000000000..e882b8008d --- /dev/null +++ b/keyboards/gboards/gergoplex/keymaps/default/rules.mk @@ -0,0 +1,17 @@ +#---------------------------------------------------------------------------- +# make gboards/gergoplex:default:flash +# Make sure you have dfu-programmer installed! +#---------------------------------------------------------------------------- + +#Debug options +VERBOSE = no +DEBUG_MATRIX_SCAN_RATE = no +DEBUG_MATRIX = no +CONSOLE_ENABLE = no + +#Combos! +VPATH += keyboards/gboards/ + +ifeq ($(strip $(DEBUG_MATRIX)), yes) + OPT_DEFS += -DDEBUG_MATRIX +endif diff --git a/keyboards/gboards/gergoplex/matrix.c b/keyboards/gboards/gergoplex/matrix.c new file mode 100644 index 0000000000..716390241a --- /dev/null +++ b/keyboards/gboards/gergoplex/matrix.c @@ -0,0 +1,241 @@ +/* + +Copyright 2013 Oleg Kostyuk + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include "matrix.h" +#include +#include +#include +#include "wait.h" +#include "action_layer.h" +#include "print.h" +#include "debug.h" +#include "util.h" +#include "debounce.h" +#include "gergoplex.h" + +#ifdef BALLER +# include +# include "pointing_device.h" +#endif + +#ifndef DEBOUNCE +# define DEBOUNCE 5 +#endif + +// ATmega pin defs +#define ROW1 (1 << 6) +#define ROW2 (1 << 5) +#define ROW3 (1 << 4) +#define ROW4 (1 << 1) + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +/* + * matrix state(1:on, 0:off) + * contains the raw values without debounce filtering of the last read cycle. + */ +static matrix_row_t raw_matrix[MATRIX_ROWS]; + +static const pin_t row_pins[MATRIX_COLS] = MATRIX_ROW_PINS; +// Right-hand side only pins, the left side is controlled my MCP +static const pin_t col_pins[MATRIX_ROWS_PER_SIDE] = MATRIX_COL_PINS; + +// Debouncing: store for each key the number of scans until it's eligible to +// change. When scanning the matrix, ignore any changes in keys that have +// already changed in the last DEBOUNCE scans. + +static matrix_row_t read_cols(uint8_t row); +static void init_cols(void); +static void unselect_rows(void); +static void select_row(uint8_t row); + +static uint8_t mcp23018_reset_loop; + +__attribute__((weak)) void matrix_init_user(void) {} +__attribute__((weak)) void matrix_scan_user(void) {} +__attribute__((weak)) void matrix_scan_kb(void) { matrix_scan_user(); } + +void matrix_init(void) { + // initialize row and col + mcp23018_status = init_mcp23018(); + unselect_rows(); + init_cols(); + + // initialize matrix state: all keys off + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + raw_matrix[i] = 0; + } + + debounce_init(MATRIX_ROWS); + matrix_init_quantum(); +} +void matrix_power_up(void) { + mcp23018_status = init_mcp23018(); + + unselect_rows(); + init_cols(); + + // initialize matrix state: all keys off + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + } +} + +// Reads and stores a row, returning +// whether a change occurred. +static inline bool store_raw_matrix_row(uint8_t index) { + matrix_row_t temp = read_cols(index); + if (raw_matrix[index] != temp) { + raw_matrix[index] = temp; + return true; + } + return false; +} +uint8_t matrix_scan(void) { + if (mcp23018_status) { // if there was an error + if (++mcp23018_reset_loop == 0) { + // if (++mcp23018_reset_loop >= 1300) { + // since mcp23018_reset_loop is 8 bit - we'll try to reset once in 255 matrix scans + // this will be approx bit more frequent than once per second + print("trying to reset mcp23018\n"); + mcp23018_status = init_mcp23018(); + if (mcp23018_status) { + print("left side not responding\n"); + } else { + print("left side attached\n"); + } + } + } + + bool changed = false; + for (uint8_t i = 0; i < MATRIX_ROWS_PER_SIDE; i++) { + // select rows from left and right hands + uint8_t left_index = i; + uint8_t right_index = i + MATRIX_ROWS_PER_SIDE; + select_row(left_index); + select_row(right_index); + + // we don't need a 30us delay anymore, because selecting a + // left-hand row requires more than 30us for i2c. + + changed |= store_raw_matrix_row(left_index); + changed |= store_raw_matrix_row(right_index); + + unselect_rows(); + } + + debounce(raw_matrix, matrix, MATRIX_ROWS, changed); + matrix_scan_quantum(); + +#ifdef DEBUG_MATRIX + for (uint8_t c = 0; c < MATRIX_COLS; c++) + for (uint8_t r = 0; r < MATRIX_ROWS; r++) + if (matrix_is_on(r, c)) xprintf("r:%d c:%d \n", r, c); +#endif + + return 1; +} + +bool matrix_is_modified(void) // deprecated and evidently not called. +{ + return true; +} + +inline bool matrix_is_on(uint8_t row, uint8_t col) { return (matrix[row] & ((matrix_row_t)1 << col)); } +inline matrix_row_t matrix_get_row(uint8_t row) { return matrix[row]; } + +void matrix_print(void) { + print("\nr/c 0123456789ABCDEF\n"); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + print_hex8(row); + print(": "); + print_bin_reverse16(matrix_get_row(row)); + print("\n"); + } +} +uint8_t matrix_key_count(void) { + uint8_t count = 0; + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + count += bitpop16(matrix[i]); + } + return count; +} + +// Remember this means ROWS +static void init_cols(void) { + for (uint8_t row = 0; row < MATRIX_COLS; row++) { + setPinInputHigh(row_pins[row]); + } +} + +static matrix_row_t read_cols(uint8_t row) { + if (row < 5) { + if (mcp23018_status) { // if there was an error + return 0; + } else { + uint8_t data = 0; + mcp23018_status = i2c_start(I2C_ADDR_READ, I2C_TIMEOUT); + if (mcp23018_status) goto out; + mcp23018_status = i2c_read_nack(I2C_TIMEOUT); + if (mcp23018_status < 0) goto out; + data = ~((uint8_t)mcp23018_status); + mcp23018_status = I2C_STATUS_SUCCESS; + out: + i2c_stop(); + +#ifdef DEBUG_MATRIX + if (data != 0x00) xprintf("I2C: %d\n", data); +#endif + return data; + } + } else { + return ~((((PINF & ROW4) >> 1) | ((PINF & (ROW1 | ROW2 | ROW3)) >> 3)) & 0xF); + } +} + +// Row pin configuration +static void unselect_rows(void) { + // no need to unselect on mcp23018, because the select step sets all + // the other row bits high, and it's not changing to a different direction + + for (uint8_t col = 0; col < MATRIX_ROWS_PER_SIDE; col++) { + setPinInput(col_pins[col]); + writePinLow(col_pins[col]); + } +} + +static void select_row(uint8_t row) { + if (row < 5) { + // select on mcp23018 + if (mcp23018_status) { // do nothing on error + } else { // set active row low : 0 // set other rows hi-Z : 1 + mcp23018_status = i2c_start(I2C_ADDR_WRITE, I2C_TIMEOUT); + if (mcp23018_status) goto out; + mcp23018_status = i2c_write(GPIOA, I2C_TIMEOUT); + if (mcp23018_status) goto out; + mcp23018_status = i2c_write(0xFF & ~(1 << (row + 1)), I2C_TIMEOUT); + if (mcp23018_status) goto out; + out: + i2c_stop(); + } + } else { + setPinOutput(col_pins[row - MATRIX_ROWS_PER_SIDE]); + writePinLow(col_pins[row - MATRIX_ROWS_PER_SIDE]); + } +} diff --git a/keyboards/gboards/gergoplex/readme.md b/keyboards/gboards/gergoplex/readme.md new file mode 100644 index 0000000000..7728d90d41 --- /dev/null +++ b/keyboards/gboards/gergoplex/readme.md @@ -0,0 +1,43 @@ +# GergoPlex + +![GergoPlex](https://assets.bigcartel.com/product_images/248890490/IMG_20191114_1406385-01-01.jpeg) + +A compact 30% (5x3+3) Split Keyboard from g Heavy Industries + +* Keyboard Maintainer: [Jane Bernhardt](https://github.com/germ) +* Hardware Supported: GergoPlex (Kit, Partial, Ready) +* Hardware Availability: [gboards.ca](http://gboards.ca) + +## Firmware building + +Build using the following command (after setting up your build environment): + +``` +make gboards/gergoplex:default +``` + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. + +Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +Switch `default` with `colemak-dhm` if you prefer to use [Colemak Mod-DH layout](https://colemakmods.github.io/mod-dh/). + +## Flashing + +Press the small SMD button on the right side board, and run: + +``` +make gboards/gergoplex:default:flash +``` + +### Troubleshooting + +See [this issue](https://github.com/qmk/qmk_toolbox/issues/58) for solutions if you're seeing: +``` +dfu-programmer: no device present. +ERROR: Bootloader not found. Trying again in 5s. +``` + +## Have an idea for a gadget or a keymap? + +[Reach out to me!](mailto:jane@gboards.ca) or submit a PR! diff --git a/keyboards/gboards/gergoplex/rules.mk b/keyboards/gboards/gergoplex/rules.mk new file mode 100644 index 0000000000..1d0ba8cae2 --- /dev/null +++ b/keyboards/gboards/gergoplex/rules.mk @@ -0,0 +1,18 @@ +MCU = atmega32u4 + +BOOTLOADER = atmel-dfu + +CUSTOM_MATRIX = yes +MOUSEKEY_ENABLE = yes # Mouse keys +COMBO_ENABLE = yes +EXTRAKEY_ENABLE = yes +CONSOLE_ENABLE = no +NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +COMMAND_ENABLE = yes +BOOTMAGIC_ENABLE = lite + +LAYOUTS = split_3x5_3 + +DEBOUNCE_TYPE = sym_eager_pr +SRC += matrix.c +QUANTUM_LIB_SRC += i2c_master.c From 376968ade4e102f7a526252599755af4c16dd525 Mon Sep 17 00:00:00 2001 From: Purdea Andrei Date: Wed, 22 Sep 2021 00:09:01 +0300 Subject: [PATCH 058/595] [Keyboard] Add 5 boards by the OverNumpad Controller (#14382) * Add initial implementation of 5 keyboards supported by the OverNumpad Controller. * Apply suggestions from code review Co-authored-by: Drashna Jaelre * Apply changes similar to other code review suggestions. * Apply suggestions from code review Co-authored-by: Drashna Jaelre * Apply changes similar to other code review suggestions. * overnumpad controller info.jsons: update maintainer and url. * classic_ultracl_pre_2013: added support for the default 'fullsize_ansi' layout * classic_ultracl_pre_2013: moved the order of the iso enter key in the layout macro to be considered to be on the bottom row, like in the default fullsize_iso layout. Rename the iso layout to fullsize_iso, and enable it in rules.mk * Removed QMKBEST and QMKURL * Apply suggestions from code review Co-authored-by: Ryan * Deleting empty files Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- keyboards/ibm/model_m_4th_gen/info.json | 16 ++++ .../model_m_4th_gen/keymaps/default/keymap.c | 33 +++++++ .../model_m_4th_gen/keymaps/default/readme.md | 1 + .../model_m_4th_gen/overnumpad_1xb/config.h | 74 +++++++++++++++ .../overnumpad_1xb/overnumpad_1xb.c | 28 ++++++ .../overnumpad_1xb/overnumpad_1xb.h | 91 +++++++++++++++++++ .../model_m_4th_gen/overnumpad_1xb/readme.md | 26 ++++++ .../model_m_4th_gen/overnumpad_1xb/rules.mk | 25 +++++ .../classic_ultracl_post_2013/info.json | 16 ++++ .../keymaps/default/keymap.c | 33 +++++++ .../keymaps/default/readme.md | 1 + .../overnumpad_1xb/config.h | 73 +++++++++++++++ .../overnumpad_1xb/overnumpad_1xb.c | 28 ++++++ .../overnumpad_1xb/overnumpad_1xb.h | 88 ++++++++++++++++++ .../overnumpad_1xb/readme.md | 28 ++++++ .../overnumpad_1xb/rules.mk | 25 +++++ .../classic_ultracl_pre_2013/info.json | 16 ++++ .../keymaps/default/keymap.c | 33 +++++++ .../keymaps/default/readme.md | 1 + .../overnumpad_1xb/config.h | 73 +++++++++++++++ .../overnumpad_1xb/overnumpad_1xb.c | 28 ++++++ .../overnumpad_1xb/overnumpad_1xb.h | 88 ++++++++++++++++++ .../overnumpad_1xb/readme.md | 26 ++++++ .../overnumpad_1xb/rules.mk | 26 ++++++ .../unicomp/spacesaver_m_post_2013/info.json | 16 ++++ .../keymaps/default/keymap.c | 42 +++++++++ .../keymaps/default/readme.md | 1 + .../overnumpad_1xb/config.h | 72 +++++++++++++++ .../overnumpad_1xb/overnumpad_1xb.c | 45 +++++++++ .../overnumpad_1xb/overnumpad_1xb.h | 88 ++++++++++++++++++ .../overnumpad_1xb/readme.md | 25 +++++ .../overnumpad_1xb/rules.mk | 25 +++++ .../unicomp/spacesaver_m_pre_2013/info.json | 16 ++++ .../keymaps/default/keymap.c | 42 +++++++++ .../keymaps/default/readme.md | 1 + .../overnumpad_1xb/config.h | 73 +++++++++++++++ .../overnumpad_1xb/overnumpad_1xb.c | 44 +++++++++ .../overnumpad_1xb/overnumpad_1xb.h | 88 ++++++++++++++++++ .../overnumpad_1xb/readme.md | 25 +++++ .../overnumpad_1xb/rules.mk | 25 +++++ 40 files changed, 1505 insertions(+) create mode 100644 keyboards/ibm/model_m_4th_gen/info.json create mode 100644 keyboards/ibm/model_m_4th_gen/keymaps/default/keymap.c create mode 100644 keyboards/ibm/model_m_4th_gen/keymaps/default/readme.md create mode 100644 keyboards/ibm/model_m_4th_gen/overnumpad_1xb/config.h create mode 100644 keyboards/ibm/model_m_4th_gen/overnumpad_1xb/overnumpad_1xb.c create mode 100644 keyboards/ibm/model_m_4th_gen/overnumpad_1xb/overnumpad_1xb.h create mode 100644 keyboards/ibm/model_m_4th_gen/overnumpad_1xb/readme.md create mode 100644 keyboards/ibm/model_m_4th_gen/overnumpad_1xb/rules.mk create mode 100644 keyboards/unicomp/classic_ultracl_post_2013/info.json create mode 100644 keyboards/unicomp/classic_ultracl_post_2013/keymaps/default/keymap.c create mode 100644 keyboards/unicomp/classic_ultracl_post_2013/keymaps/default/readme.md create mode 100644 keyboards/unicomp/classic_ultracl_post_2013/overnumpad_1xb/config.h create mode 100644 keyboards/unicomp/classic_ultracl_post_2013/overnumpad_1xb/overnumpad_1xb.c create mode 100644 keyboards/unicomp/classic_ultracl_post_2013/overnumpad_1xb/overnumpad_1xb.h create mode 100644 keyboards/unicomp/classic_ultracl_post_2013/overnumpad_1xb/readme.md create mode 100644 keyboards/unicomp/classic_ultracl_post_2013/overnumpad_1xb/rules.mk create mode 100644 keyboards/unicomp/classic_ultracl_pre_2013/info.json create mode 100644 keyboards/unicomp/classic_ultracl_pre_2013/keymaps/default/keymap.c create mode 100644 keyboards/unicomp/classic_ultracl_pre_2013/keymaps/default/readme.md create mode 100644 keyboards/unicomp/classic_ultracl_pre_2013/overnumpad_1xb/config.h create mode 100644 keyboards/unicomp/classic_ultracl_pre_2013/overnumpad_1xb/overnumpad_1xb.c create mode 100644 keyboards/unicomp/classic_ultracl_pre_2013/overnumpad_1xb/overnumpad_1xb.h create mode 100644 keyboards/unicomp/classic_ultracl_pre_2013/overnumpad_1xb/readme.md create mode 100644 keyboards/unicomp/classic_ultracl_pre_2013/overnumpad_1xb/rules.mk create mode 100644 keyboards/unicomp/spacesaver_m_post_2013/info.json create mode 100644 keyboards/unicomp/spacesaver_m_post_2013/keymaps/default/keymap.c create mode 100644 keyboards/unicomp/spacesaver_m_post_2013/keymaps/default/readme.md create mode 100644 keyboards/unicomp/spacesaver_m_post_2013/overnumpad_1xb/config.h create mode 100644 keyboards/unicomp/spacesaver_m_post_2013/overnumpad_1xb/overnumpad_1xb.c create mode 100644 keyboards/unicomp/spacesaver_m_post_2013/overnumpad_1xb/overnumpad_1xb.h create mode 100644 keyboards/unicomp/spacesaver_m_post_2013/overnumpad_1xb/readme.md create mode 100644 keyboards/unicomp/spacesaver_m_post_2013/overnumpad_1xb/rules.mk create mode 100644 keyboards/unicomp/spacesaver_m_pre_2013/info.json create mode 100644 keyboards/unicomp/spacesaver_m_pre_2013/keymaps/default/keymap.c create mode 100644 keyboards/unicomp/spacesaver_m_pre_2013/keymaps/default/readme.md create mode 100644 keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/config.h create mode 100644 keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/overnumpad_1xb.c create mode 100644 keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/overnumpad_1xb.h create mode 100644 keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/readme.md create mode 100644 keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/rules.mk diff --git a/keyboards/ibm/model_m_4th_gen/info.json b/keyboards/ibm/model_m_4th_gen/info.json new file mode 100644 index 0000000000..932bfb8d73 --- /dev/null +++ b/keyboards/ibm/model_m_4th_gen/info.json @@ -0,0 +1,16 @@ +{ + "keyboard_name": "ibm/model_m_4th_gen", + "url": "https://github.com/purdeaandrei/overnumpad_controller_1xb", + "maintainer": "purdeaandrei", + "layouts": { + "LAYOUT_all": { + "layout": [{"x":0, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"x":17.25, "y":0}, {"x":0, "y":1.5}, {"x":1, "y":1.5}, {"x":2, "y":1.5}, {"x":3, "y":1.5}, {"x":4, "y":1.5}, {"x":5, "y":1.5}, {"x":6, "y":1.5}, {"x":7, "y":1.5}, {"x":8, "y":1.5}, {"x":9, "y":1.5}, {"x":10, "y":1.5}, {"x":11, "y":1.5}, {"x":12, "y":1.5}, {"x":13, "y":1.5}, {"x":14, "y":1.5}, {"x":15.25, "y":1.5}, {"x":16.25, "y":1.5}, {"x":17.25, "y":1.5}, {"x":18.5, "y":1.5}, {"x":19.5, "y":1.5}, {"x":20.5, "y":1.5}, {"x":21.5, "y":1.5}, {"x":0, "y":2.5, "w":1.5}, {"x":1.5, "y":2.5}, {"x":2.5, "y":2.5}, {"x":3.5, "y":2.5}, {"x":4.5, "y":2.5}, {"x":5.5, "y":2.5}, {"x":6.5, "y":2.5}, {"x":7.5, "y":2.5}, {"x":8.5, "y":2.5}, {"x":9.5, "y":2.5}, {"x":10.5, "y":2.5}, {"x":11.5, "y":2.5}, {"x":12.5, "y":2.5}, {"x":13.5, "y":2.5, "w":1.5}, {"x":15.25, "y":2.5}, {"x":16.25, "y":2.5}, {"x":17.25, "y":2.5}, {"x":18.5, "y":2.5}, {"x":19.5, "y":2.5}, {"x":20.5, "y":2.5}, {"x":21.5, "y":2.5}, {"x":0, "y":3.5, "w":1.75}, {"x":1.75, "y":3.5}, {"x":2.75, "y":3.5}, {"x":3.75, "y":3.5}, {"x":4.75, "y":3.5}, {"x":5.75, "y":3.5}, {"x":6.75, "y":3.5}, {"x":7.75, "y":3.5}, {"x":8.75, "y":3.5}, {"x":9.75, "y":3.5}, {"x":10.75, "y":3.5}, {"x":11.75, "y":3.5}, {"x":12.75, "y":3.5}, {"x":13.75, "y":3.5, "w":1.25}, {"x":18.5, "y":3.5}, {"x":19.5, "y":3.5}, {"x":20.5, "y":3.5}, {"x":21.5, "y":3.5}, {"x":0, "y":4.5, "w":1.25}, {"x":1.25, "y":4.5}, {"x":2.25, "y":4.5}, {"x":3.25, "y":4.5}, {"x":4.25, "y":4.5}, {"x":5.25, "y":4.5}, {"x":6.25, "y":4.5}, {"x":7.25, "y":4.5}, {"x":8.25, "y":4.5}, {"x":9.25, "y":4.5}, {"x":10.25, "y":4.5}, {"x":11.25, "y":4.5}, {"x":12.25, "y":4.5}, {"x":13.25, "y":4.5, "w":1.75}, {"x":16.25, "y":4.5}, {"x":18.5, "y":4.5}, {"x":19.5, "y":4.5}, {"x":20.5, "y":4.5}, {"x":21.5, "y":4.5}, {"x":0, "y":5.5, "w":1.5}, {"x":2.5, "y":5.5, "w":1.5}, {"x":4, "y":5.5}, {"x":5, "y":5.5, "w":6}, {"x":11, "y":5.5, "w":1.5}, {"x":13.5, "y":5.5, "w":1.5}, {"x":15.25, "y":5.5}, {"x":16.25, "y":5.5}, {"x":17.25, "y":5.5}, {"x":18.5, "y":5.5}, {"x":19.5, "y":5.5}, {"x":20.5, "y":5.5}, {"x":21.5, "y":5.5}] + }, + "LAYOUT_ansi": { + "layout": [{"x":0, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"x":17.25, "y":0}, {"x":0, "y":1.5}, {"x":1, "y":1.5}, {"x":2, "y":1.5}, {"x":3, "y":1.5}, {"x":4, "y":1.5}, {"x":5, "y":1.5}, {"x":6, "y":1.5}, {"x":7, "y":1.5}, {"x":8, "y":1.5}, {"x":9, "y":1.5}, {"x":10, "y":1.5}, {"x":11, "y":1.5}, {"x":12, "y":1.5}, {"x":13, "y":1.5, "w":2}, {"x":15.25, "y":1.5}, {"x":16.25, "y":1.5}, {"x":17.25, "y":1.5}, {"x":18.5, "y":1.5}, {"x":19.5, "y":1.5}, {"x":20.5, "y":1.5}, {"x":21.5, "y":1.5}, {"x":0, "y":2.5, "w":1.5}, {"x":1.5, "y":2.5}, {"x":2.5, "y":2.5}, {"x":3.5, "y":2.5}, {"x":4.5, "y":2.5}, {"x":5.5, "y":2.5}, {"x":6.5, "y":2.5}, {"x":7.5, "y":2.5}, {"x":8.5, "y":2.5}, {"x":9.5, "y":2.5}, {"x":10.5, "y":2.5}, {"x":11.5, "y":2.5}, {"x":12.5, "y":2.5}, {"x":13.5, "y":2.5, "w":1.5}, {"x":15.25, "y":2.5}, {"x":16.25, "y":2.5}, {"x":17.25, "y":2.5}, {"x":18.5, "y":2.5}, {"x":19.5, "y":2.5}, {"x":20.5, "y":2.5}, {"x":21.5, "y":2.5, "h":2}, {"x":0, "y":3.5, "w":1.75}, {"x":1.75, "y":3.5}, {"x":2.75, "y":3.5}, {"x":3.75, "y":3.5}, {"x":4.75, "y":3.5}, {"x":5.75, "y":3.5}, {"x":6.75, "y":3.5}, {"x":7.75, "y":3.5}, {"x":8.75, "y":3.5}, {"x":9.75, "y":3.5}, {"x":10.75, "y":3.5}, {"x":11.75, "y":3.5}, {"x":12.75, "y":3.5, "w":2.25}, {"x":18.5, "y":3.5}, {"x":19.5, "y":3.5}, {"x":20.5, "y":3.5}, {"x":0, "y":4.5, "w":2.25}, {"x":2.25, "y":4.5}, {"x":3.25, "y":4.5}, {"x":4.25, "y":4.5}, {"x":5.25, "y":4.5}, {"x":6.25, "y":4.5}, {"x":7.25, "y":4.5}, {"x":8.25, "y":4.5}, {"x":9.25, "y":4.5}, {"x":10.25, "y":4.5}, {"x":11.25, "y":4.5}, {"x":12.25, "y":4.5, "w":2.75}, {"x":16.25, "y":4.5}, {"x":18.5, "y":4.5}, {"x":19.5, "y":4.5}, {"x":20.5, "y":4.5}, {"x":21.5, "y":4.5, "h":2}, {"x":0, "y":5.5, "w":1.5}, {"x":2.5, "y":5.5, "w":1.5}, {"x":4, "y":5.5, "w":7}, {"x":11, "y":5.5, "w":1.5}, {"x":13.5, "y":5.5, "w":1.5}, {"x":15.25, "y":5.5}, {"x":16.25, "y":5.5}, {"x":17.25, "y":5.5}, {"x":18.5, "y":5.5, "w":2}, {"x":20.5, "y":5.5}] + }, + "LAYOUT_iso": { + "layout": [{"x":0, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"x":17.25, "y":0}, {"x":0, "y":1.5}, {"x":1, "y":1.5}, {"x":2, "y":1.5}, {"x":3, "y":1.5}, {"x":4, "y":1.5}, {"x":5, "y":1.5}, {"x":6, "y":1.5}, {"x":7, "y":1.5}, {"x":8, "y":1.5}, {"x":9, "y":1.5}, {"x":10, "y":1.5}, {"x":11, "y":1.5}, {"x":12, "y":1.5}, {"x":13, "y":1.5, "w":2}, {"x":15.25, "y":1.5}, {"x":16.25, "y":1.5}, {"x":17.25, "y":1.5}, {"x":18.5, "y":1.5}, {"x":19.5, "y":1.5}, {"x":20.5, "y":1.5}, {"x":21.5, "y":1.5}, {"x":0, "y":2.5, "w":1.5}, {"x":1.5, "y":2.5}, {"x":2.5, "y":2.5}, {"x":3.5, "y":2.5}, {"x":4.5, "y":2.5}, {"x":5.5, "y":2.5}, {"x":6.5, "y":2.5}, {"x":7.5, "y":2.5}, {"x":8.5, "y":2.5}, {"x":9.5, "y":2.5}, {"x":10.5, "y":2.5}, {"x":11.5, "y":2.5}, {"x":12.5, "y":2.5}, {"x":13.75, "y":2.5, "w":1.25, "h":2}, {"x":15.25, "y":2.5}, {"x":16.25, "y":2.5}, {"x":17.25, "y":2.5}, {"x":18.5, "y":2.5}, {"x":19.5, "y":2.5}, {"x":20.5, "y":2.5}, {"x":21.5, "y":2.5, "h":2}, {"x":0, "y":3.5, "w":1.75}, {"x":1.75, "y":3.5}, {"x":2.75, "y":3.5}, {"x":3.75, "y":3.5}, {"x":4.75, "y":3.5}, {"x":5.75, "y":3.5}, {"x":6.75, "y":3.5}, {"x":7.75, "y":3.5}, {"x":8.75, "y":3.5}, {"x":9.75, "y":3.5}, {"x":10.75, "y":3.5}, {"x":11.75, "y":3.5}, {"x":12.75, "y":3.5}, {"x":18.5, "y":3.5}, {"x":19.5, "y":3.5}, {"x":20.5, "y":3.5}, {"x":0, "y":4.5, "w":1.25}, {"x":1.25, "y":4.5}, {"x":2.25, "y":4.5}, {"x":3.25, "y":4.5}, {"x":4.25, "y":4.5}, {"x":5.25, "y":4.5}, {"x":6.25, "y":4.5}, {"x":7.25, "y":4.5}, {"x":8.25, "y":4.5}, {"x":9.25, "y":4.5}, {"x":10.25, "y":4.5}, {"x":11.25, "y":4.5}, {"x":12.25, "y":4.5, "w":2.75}, {"x":16.25, "y":4.5}, {"x":18.5, "y":4.5}, {"x":19.5, "y":4.5}, {"x":20.5, "y":4.5}, {"x":21.5, "y":4.5, "h":2}, {"x":0, "y":5.5, "w":1.5}, {"x":2.5, "y":5.5, "w":1.5}, {"x":4, "y":5.5, "w":7}, {"x":11, "y":5.5, "w":1.5}, {"x":13.5, "y":5.5, "w":1.5}, {"x":15.25, "y":5.5}, {"x":16.25, "y":5.5}, {"x":17.25, "y":5.5}, {"x":18.5, "y":5.5, "w":2}, {"x":20.5, "y":5.5}] + } + } +} diff --git a/keyboards/ibm/model_m_4th_gen/keymaps/default/keymap.c b/keyboards/ibm/model_m_4th_gen/keymaps/default/keymap.c new file mode 100644 index 0000000000..b396343861 --- /dev/null +++ b/keyboards/ibm/model_m_4th_gen/keymaps/default/keymap.c @@ -0,0 +1,33 @@ +/* Copyright 2020 Purdea Andrei + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [_BASE] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL,KC_BSPC,KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,KC_NUHS, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT,KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, + KC_LCTRL, KC_LALT, KC_NO, KC_SPC, KC_RALT, KC_RCTRL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_P0, KC_PDOT, KC_PENT + ) +}; diff --git a/keyboards/ibm/model_m_4th_gen/keymaps/default/readme.md b/keyboards/ibm/model_m_4th_gen/keymaps/default/readme.md new file mode 100644 index 0000000000..06a8d26116 --- /dev/null +++ b/keyboards/ibm/model_m_4th_gen/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for ibm/model_m_4th_gen/$(CONTROLLER) diff --git a/keyboards/ibm/model_m_4th_gen/overnumpad_1xb/config.h b/keyboards/ibm/model_m_4th_gen/overnumpad_1xb/config.h new file mode 100644 index 0000000000..0dca4f6bc6 --- /dev/null +++ b/keyboards/ibm/model_m_4th_gen/overnumpad_1xb/config.h @@ -0,0 +1,74 @@ +/* Copyright 2020 Purdea Andrei + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x16C0 +#define PRODUCT_ID 0x27DB +#define DEVICE_VER 0x0001 +#define MANUFACTURER IBM/Purdea Andrei +#define PRODUCT IBM Model M (4th generation) +#define SERIAL_NUMBER "purdea.ro:overnumpad_controller" + +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 16 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ + +// All pins in order from left-to-right, as seen on the keyboard: +// C3, C2, C1, C0, A3, A4, A5, A6, A7, C4, C5, B0, B1, B10, B12, B13, B14, B15, C6, C7, C8, C9, A8, A9, A10, +// On this chip A10, B10 have stronger pull-ups, so it's better to avoid them if possible. + +// On this keyboard the right-most pin is not used, A10 can be ignored. +// On this keyboard the pins are ordered in the following way: (top/bottom meaning where the trace is routed on the membranes) +// top, top, top, top, top, top, top, top, bottom, top, bottom, top, bottom, top, bottom, top, bottom, bottom, top, top, top, top, bottom, bottom + +#define MATRIX_COL_PINS { C3, C2, C1, C0, A3, A4, A5, A6, C4, B0, B10, B13, C6, C7, C8, C9 } +#define MATRIX_ROW_PINS { A7, C5, B1, B12, B14, B15, A8, A9 } +//#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION ROW2COL + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +#define MATRIX_HAS_GHOST + +#define STM32_HSECLK 16000000 + +#define SOLENOID_PIN B5 +#define SOLENOID_DEFAULT_DWELL 4 +#define SOLENOID_MIN_DWELL 4 +#define NO_HAPTIC_MOD + +#define LED_NUM_LOCK_PIN C12 +#define LED_CAPS_LOCK_PIN C11 +#define LED_SCROLL_LOCK_PIN C10 +#define LED_ON_STATE 1 diff --git a/keyboards/ibm/model_m_4th_gen/overnumpad_1xb/overnumpad_1xb.c b/keyboards/ibm/model_m_4th_gen/overnumpad_1xb/overnumpad_1xb.c new file mode 100644 index 0000000000..c4229ef997 --- /dev/null +++ b/keyboards/ibm/model_m_4th_gen/overnumpad_1xb/overnumpad_1xb.c @@ -0,0 +1,28 @@ +/* Copyright 2020 Purdea Andrei + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "overnumpad_1xb.h" + +void keyboard_post_init_kb(void) +{ + // Solenoid enable: + setPinOutput(C13); + writePin(C13, 1); + + //debug_enable=true; + //debug_matrix=true; +} + diff --git a/keyboards/ibm/model_m_4th_gen/overnumpad_1xb/overnumpad_1xb.h b/keyboards/ibm/model_m_4th_gen/overnumpad_1xb/overnumpad_1xb.h new file mode 100644 index 0000000000..4e210c53ac --- /dev/null +++ b/keyboards/ibm/model_m_4th_gen/overnumpad_1xb/overnumpad_1xb.h @@ -0,0 +1,91 @@ +/* Copyright 2020 Purdea Andrei + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ + + +#define LAYOUT_all( \ + k_esc, k_f1, k_f2, k_f3, k_f4, k_f5, k_f6, k_f7, k_f8, k_f9, k_f10, k_f11, k_f12, k_prscr, k_scrl, k_pause, \ + k_tild, k_1, k_2, k_3, k_4, k_5, k_6, k_7, k_8, k_9, k_0, k_minus, k_equals, k_bsp_hidden, k_backspace, k_ins, k_home, k_pgup, kp_nl, kp_div, kp_mult, kp_minus, \ + k_tab, k_q, k_w, k_e, k_r, k_t, k_y, k_u, k_i, k_o, k_p, k_squarebrop, k_squarebrcl, k_backsl, k_del, k_end, k_pgdn, kp_7, kp_8, kp_9, kp_plus, \ + k_caps, k_a, k_s, k_d, k_f, k_g, k_h, k_j, k_k, k_l, k_semicolon, k_singlequote, k_nuhs,k_return, kp_4, kp_5, kp_6, kp_plus_hidden, \ + k_lshift,k_nubs,k_z, k_x, k_c, k_v, k_b, k_n, k_m, k_cm,k_period, k_fwslash, k_rshift_hidden, k_rshift, k_up, kp_1, kp_2, kp_3, kp_enter, \ + k_lctrl, k_lalt, k_code, k_space, k_ralt, k_rctrl, k_left, k_down, k_right, kp_0_hidden, kp_0, kp_dot, kp_enter_hidden \ +) \ +{ \ + /* 0 1 2 3 4 5 6 7 8 9 A B C D E F */ \ + /* 0 */ { k_esc, k_g, k_h, k_f6, KC_NO, k_singlequote, k_f5, KC_NO, kp_0_hidden, kp_0, kp_dot, k_up, k_lalt, KC_NO, k_f4, k_nubs }, \ + /* 1 */ { k_tab, k_t, k_y, k_squarebrcl, k_f7, k_squarebrop, k_backspace, k_lshift, kp_4, kp_5, kp_6, kp_plus_hidden, KC_NO, KC_NO, k_f3, k_caps }, \ + /* 2 */ { k_tild, k_5, k_6, k_equals, k_f8, k_minus, k_f9, KC_NO, k_del, k_ins, k_pgup, k_home, KC_NO, k_lctrl, k_f2, k_f1 }, \ + /* 3 */ { k_1, k_4, k_7, k_8, k_9, k_0, k_f10, KC_NO, k_f11, k_f12, k_pgdn, k_end, k_prscr, KC_NO, k_3, k_2 }, \ + /* 4 */ { k_q, k_r, k_u, k_i, k_o, k_p, k_bsp_hidden, KC_NO, kp_7, kp_8, kp_9, kp_plus, k_scrl, KC_NO, k_e, k_w }, \ + /* 5 */ { k_a, k_f, k_j, k_k, k_l, k_semicolon, k_backsl, KC_NO, kp_1, kp_2, kp_3, kp_enter, kp_enter_hidden, KC_NO, k_d, k_s }, \ + /* 6 */ { k_z, k_v, k_m, k_cm, k_period, k_nuhs, k_return, k_rshift, kp_nl, kp_div, kp_mult, k_pause, KC_NO, k_rctrl, k_c, k_x }, \ + /* 7 */ { KC_NO, k_b, k_n, k_rshift_hidden, KC_NO, k_fwslash, k_space, KC_NO, k_down, k_right, kp_minus, k_left, k_ralt, KC_NO, KC_NO, k_code } \ +} + +// the following three key mappings are informed guesses, based on similarity of the gen4 membrane to previous-gen membranes: kp_plus, k_ins, kp_0_hidden + +#define LAYOUT_ansi( \ + k_esc, k_f1, k_f2, k_f3, k_f4, k_f5, k_f6, k_f7, k_f8, k_f9, k_f10, k_f11, k_f12, k_prscr, k_scrl, k_pause, \ + k_tild, k_1, k_2, k_3, k_4, k_5, k_6, k_7, k_8, k_9, k_0, k_minus, k_equals, k_backspace, k_ins, k_home, k_pgup, kp_nl, kp_div, kp_mult, kp_minus, \ + k_tab, k_q, k_w, k_e, k_r, k_t, k_y, k_u, k_i, k_o, k_p, k_squarebrop, k_squarebrcl, k_backsl, k_del, k_end, k_pgdn, kp_7, kp_8, kp_9, kp_plus, \ + k_caps, k_a, k_s, k_d, k_f, k_g, k_h, k_j, k_k, k_l, k_semicolon, k_singlequote, k_return, kp_4, kp_5, kp_6, \ + k_lshift, k_z, k_x, k_c, k_v, k_b, k_n, k_m, k_cm,k_period, k_fwslash, k_rshift, k_up, kp_1, kp_2, kp_3, kp_enter, \ + k_lctrl, k_lalt, k_space, k_ralt, k_rctrl, k_left, k_down, k_right, kp_0, kp_dot \ +) \ +{ \ + /* 0 1 2 3 4 5 6 7 8 9 A B C D E F */ \ + /* 0 */ { k_esc, k_g, k_h, k_f6, KC_NO, k_singlequote, k_f5, KC_NO, KC_NO, kp_0, kp_dot, k_up, k_lalt, KC_NO, k_f4, KC_NO }, \ + /* 1 */ { k_tab, k_t, k_y, k_squarebrcl, k_f7, k_squarebrop, k_backspace, k_lshift, kp_4, kp_5, kp_6, KC_NO, KC_NO, KC_NO, k_f3, k_caps }, \ + /* 2 */ { k_tild, k_5, k_6, k_equals, k_f8, k_minus, k_f9, KC_NO, k_del, k_ins, k_pgup, k_home, KC_NO, k_lctrl, k_f2, k_f1 }, \ + /* 3 */ { k_1, k_4, k_7, k_8, k_9, k_0, k_f10, KC_NO, k_f11, k_f12, k_pgdn, k_end, k_prscr, KC_NO, k_3, k_2 }, \ + /* 4 */ { k_q, k_r, k_u, k_i, k_o, k_p, KC_NO, KC_NO, kp_7, kp_8, kp_9, kp_plus, k_scrl, KC_NO, k_e, k_w }, \ + /* 5 */ { k_a, k_f, k_j, k_k, k_l, k_semicolon, k_backsl, KC_NO, kp_1, kp_2, kp_3, kp_enter, KC_NO, KC_NO, k_d, k_s }, \ + /* 6 */ { k_z, k_v, k_m, k_cm, k_period, KC_NO, k_return, k_rshift, kp_nl, kp_div, kp_mult, k_pause, KC_NO, k_rctrl, k_c, k_x }, \ + /* 7 */ { KC_NO, k_b, k_n, KC_NO, KC_NO, k_fwslash, k_space, KC_NO, k_down, k_right, kp_minus, k_left, k_ralt, KC_NO, KC_NO, KC_NO } \ +} + +#define LAYOUT_iso( \ + k_esc, k_f1, k_f2, k_f3, k_f4, k_f5, k_f6, k_f7, k_f8, k_f9, k_f10, k_f11, k_f12, k_prscr, k_scrl, k_pause, \ + k_tild, k_1, k_2, k_3, k_4, k_5, k_6, k_7, k_8, k_9, k_0, k_minus, k_equals, k_backspace, k_ins, k_home, k_pgup, kp_nl, kp_div, kp_mult, kp_minus, \ + k_tab, k_q, k_w, k_e, k_r, k_t, k_y, k_u, k_i, k_o, k_p, k_squarebrop, k_squarebrcl, k_return, k_del, k_end, k_pgdn, kp_7, kp_8, kp_9, kp_plus, \ + k_caps, k_a, k_s, k_d, k_f, k_g, k_h, k_j, k_k, k_l, k_semicolon, k_singlequote, k_nuhs, kp_4, kp_5, kp_6, \ + k_lshift,k_nubs,k_z, k_x, k_c, k_v, k_b, k_n, k_m, k_cm,k_period, k_fwslash, k_rshift, k_up, kp_1, kp_2, kp_3, kp_enter, \ + k_lctrl, k_lalt, k_space, k_ralt, k_rctrl, k_left, k_down, k_right, kp_0, kp_dot \ +) \ +{ \ + /* 0 1 2 3 4 5 6 7 8 9 A B C D E F */ \ + /* 0 */ { k_esc, k_g, k_h, k_f6, KC_NO, k_singlequote, k_f5, KC_NO, KC_NO, kp_0, kp_dot, k_up, k_lalt, KC_NO, k_f4, k_nubs }, \ + /* 1 */ { k_tab, k_t, k_y, k_squarebrcl, k_f7, k_squarebrop, k_backspace, k_lshift, kp_4, kp_5, kp_6, KC_NO, KC_NO, KC_NO, k_f3, k_caps }, \ + /* 2 */ { k_tild, k_5, k_6, k_equals, k_f8, k_minus, k_f9, KC_NO, k_del, k_ins, k_pgup, k_home, KC_NO, k_lctrl, k_f2, k_f1 }, \ + /* 3 */ { k_1, k_4, k_7, k_8, k_9, k_0, k_f10, KC_NO, k_f11, k_f12, k_pgdn, k_end, k_prscr, KC_NO, k_3, k_2 }, \ + /* 4 */ { k_q, k_r, k_u, k_i, k_o, k_p, KC_NO, KC_NO, kp_7, kp_8, kp_9, kp_plus, k_scrl, KC_NO, k_e, k_w }, \ + /* 5 */ { k_a, k_f, k_j, k_k, k_l, k_semicolon, KC_NO, KC_NO, kp_1, kp_2, kp_3, kp_enter, KC_NO, KC_NO, k_d, k_s }, \ + /* 6 */ { k_z, k_v, k_m, k_cm, k_period, k_nuhs, k_return, k_rshift, kp_nl, kp_div, kp_mult, k_pause, KC_NO, k_rctrl, k_c, k_x }, \ + /* 7 */ { KC_NO, k_b, k_n, KC_NO, KC_NO, k_fwslash, k_space, KC_NO, k_down, k_right, kp_minus, k_left, k_ralt, KC_NO, KC_NO, KC_NO } \ +} diff --git a/keyboards/ibm/model_m_4th_gen/overnumpad_1xb/readme.md b/keyboards/ibm/model_m_4th_gen/overnumpad_1xb/readme.md new file mode 100644 index 0000000000..dd1bd68ef8 --- /dev/null +++ b/keyboards/ibm/model_m_4th_gen/overnumpad_1xb/readme.md @@ -0,0 +1,26 @@ +# ibm/model_m_4th_gen/overnumpad_1xb + +![ibm/model_m_4th_gen/overnumpad_1xb](https://deskthority.net/wiki/images/thumb/1/11/IBM_Model_M_1391406_--_top.jpg/499px-IBM_Model_M_1391406_--_top.jpg) + +This firmware is intended to support 4th generation IBM Model M keyboards (the ones that have their controllers under the locklights header). +* Confirmed to be working with: + * PN: 1391412 Date: 20-03-97 Made in United Kingdom by IBM United Kingdom Limited, Greenock, Scotland, UK + +* Keyboard Maintainer: [Purdea Andrei](https://github.com/purdeaandrei) +* Hardware Supported: OverNumpad controller v1.Xb +* Hardware Availability: + * [controller](https://github.com/purdeaandrei/overnumpad_controller_1xb) + +To place the keyboard into bootloader mode in order to flash it, hold the ESC key while plugging the board in. +It's possible to make this feature not work, by flashing the wrong firmware onto the keyboard. +If that happens, open up the keyboard, and press the RST&PROG button to enter bootloader mode. + +Make example for this keyboard (after setting up your build environment): + + make ibm/model_m_4th_gen/overnumpad_1xb:default + +Flashing example for this keyboard: + + make ibm/model_m_4th_gen/overnumpad_1xb:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/ibm/model_m_4th_gen/overnumpad_1xb/rules.mk b/keyboards/ibm/model_m_4th_gen/overnumpad_1xb/rules.mk new file mode 100644 index 0000000000..507f4fcd37 --- /dev/null +++ b/keyboards/ibm/model_m_4th_gen/overnumpad_1xb/rules.mk @@ -0,0 +1,25 @@ +# MCU name +MCU = STM32F446 # STM32F446RET6 + +# Bootloader selection +BOOTLOADER = stm32-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enter bootloader mode when holding the ESC key. +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +ENCODER_ENABLE = no # Enable rotary encoder support +AUDIO_ENABLE = no # Audio output +KEYBOARD_SHARED_EP = yes # Free up some extra endpoints - needed if console+mouse+extra + +HAPTIC_ENABLE += SOLENOID diff --git a/keyboards/unicomp/classic_ultracl_post_2013/info.json b/keyboards/unicomp/classic_ultracl_post_2013/info.json new file mode 100644 index 0000000000..08f4d5ebf7 --- /dev/null +++ b/keyboards/unicomp/classic_ultracl_post_2013/info.json @@ -0,0 +1,16 @@ +{ + "keyboard_name": "unicomp/classic_ultracl_post_2013", + "url": "https://github.com/purdeaandrei/overnumpad_controller_1xb", + "maintainer": "purdeaandrei", + "layouts": { + "LAYOUT_all": { + "layout": [{"x":0, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"x":17.25, "y":0}, {"x":0, "y":1.5}, {"x":1, "y":1.5}, {"x":2, "y":1.5}, {"x":3, "y":1.5}, {"x":4, "y":1.5}, {"x":5, "y":1.5}, {"x":6, "y":1.5}, {"x":7, "y":1.5}, {"x":8, "y":1.5}, {"x":9, "y":1.5}, {"x":10, "y":1.5}, {"x":11, "y":1.5}, {"x":12, "y":1.5}, {"x":13, "y":1.5}, {"x":14, "y":1.5}, {"x":15.25, "y":1.5}, {"x":16.25, "y":1.5}, {"x":17.25, "y":1.5}, {"x":18.5, "y":1.5}, {"x":19.5, "y":1.5}, {"x":20.5, "y":1.5}, {"x":21.5, "y":1.5}, {"x":0, "y":2.5, "w":1.5}, {"x":1.5, "y":2.5}, {"x":2.5, "y":2.5}, {"x":3.5, "y":2.5}, {"x":4.5, "y":2.5}, {"x":5.5, "y":2.5}, {"x":6.5, "y":2.5}, {"x":7.5, "y":2.5}, {"x":8.5, "y":2.5}, {"x":9.5, "y":2.5}, {"x":10.5, "y":2.5}, {"x":11.5, "y":2.5}, {"x":12.5, "y":2.5}, {"x":13.5, "y":2.5, "w":1.5}, {"x":15.25, "y":2.5}, {"x":16.25, "y":2.5}, {"x":17.25, "y":2.5}, {"x":18.5, "y":2.5}, {"x":19.5, "y":2.5}, {"x":20.5, "y":2.5}, {"x":21.5, "y":2.5}, {"x":0, "y":3.5, "w":1.75}, {"x":1.75, "y":3.5}, {"x":2.75, "y":3.5}, {"x":3.75, "y":3.5}, {"x":4.75, "y":3.5}, {"x":5.75, "y":3.5}, {"x":6.75, "y":3.5}, {"x":7.75, "y":3.5}, {"x":8.75, "y":3.5}, {"x":9.75, "y":3.5}, {"x":10.75, "y":3.5}, {"x":11.75, "y":3.5}, {"x":12.75, "y":3.5}, {"x":13.75, "y":3.5, "w":1.25}, {"x":18.5, "y":3.5}, {"x":19.5, "y":3.5}, {"x":20.5, "y":3.5}, {"x":21.5, "y":3.5}, {"x":0, "y":4.5, "w":1.25}, {"x":1.25, "y":4.5}, {"x":2.25, "y":4.5}, {"x":3.25, "y":4.5}, {"x":4.25, "y":4.5}, {"x":5.25, "y":4.5}, {"x":6.25, "y":4.5}, {"x":7.25, "y":4.5}, {"x":8.25, "y":4.5}, {"x":9.25, "y":4.5}, {"x":10.25, "y":4.5}, {"x":11.25, "y":4.5}, {"x":12.25, "y":4.5}, {"x":13.25, "y":4.5, "w":1.75}, {"x":16.25, "y":4.5}, {"x":18.5, "y":4.5}, {"x":19.5, "y":4.5}, {"x":20.5, "y":4.5}, {"x":21.5, "y":4.5}, {"x":0, "y":5.5, "w":1.5}, {"x":1.5, "y":5.5}, {"x":2.5, "y":5.5, "w":1.5}, {"x":4, "y":5.5}, {"x":5, "y":5.5, "w":4.75}, {"x":9.75, "y":5.5, "w":1.25}, {"x":11, "y":5.5, "w":1.5}, {"x":12.5, "y":5.5}, {"x":13.5, "y":5.5, "w":1.5}, {"x":15.25, "y":5.5}, {"x":16.25, "y":5.5}, {"x":17.25, "y":5.5}, {"x":18.5, "y":5.5}, {"x":19.5, "y":5.5}, {"x":20.5, "y":5.5}, {"x":21.5, "y":5.5}] + }, + "LAYOUT_ansi": { + "layout": [{"x":0, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"x":17.25, "y":0}, {"x":0, "y":1.5}, {"x":1, "y":1.5}, {"x":2, "y":1.5}, {"x":3, "y":1.5}, {"x":4, "y":1.5}, {"x":5, "y":1.5}, {"x":6, "y":1.5}, {"x":7, "y":1.5}, {"x":8, "y":1.5}, {"x":9, "y":1.5}, {"x":10, "y":1.5}, {"x":11, "y":1.5}, {"x":12, "y":1.5}, {"x":13, "y":1.5, "w":2}, {"x":15.25, "y":1.5}, {"x":16.25, "y":1.5}, {"x":17.25, "y":1.5}, {"x":18.5, "y":1.5}, {"x":19.5, "y":1.5}, {"x":20.5, "y":1.5}, {"x":21.5, "y":1.5}, {"x":0, "y":2.5, "w":1.5}, {"x":1.5, "y":2.5}, {"x":2.5, "y":2.5}, {"x":3.5, "y":2.5}, {"x":4.5, "y":2.5}, {"x":5.5, "y":2.5}, {"x":6.5, "y":2.5}, {"x":7.5, "y":2.5}, {"x":8.5, "y":2.5}, {"x":9.5, "y":2.5}, {"x":10.5, "y":2.5}, {"x":11.5, "y":2.5}, {"x":12.5, "y":2.5}, {"x":13.5, "y":2.5, "w":1.5}, {"x":15.25, "y":2.5}, {"x":16.25, "y":2.5}, {"x":17.25, "y":2.5}, {"x":18.5, "y":2.5}, {"x":19.5, "y":2.5}, {"x":20.5, "y":2.5}, {"x":21.5, "y":2.5, "h":2}, {"x":0, "y":3.5, "w":1.75}, {"x":1.75, "y":3.5}, {"x":2.75, "y":3.5}, {"x":3.75, "y":3.5}, {"x":4.75, "y":3.5}, {"x":5.75, "y":3.5}, {"x":6.75, "y":3.5}, {"x":7.75, "y":3.5}, {"x":8.75, "y":3.5}, {"x":9.75, "y":3.5}, {"x":10.75, "y":3.5}, {"x":11.75, "y":3.5}, {"x":12.75, "y":3.5, "w":2.25}, {"x":18.5, "y":3.5}, {"x":19.5, "y":3.5}, {"x":20.5, "y":3.5}, {"x":0, "y":4.5, "w":2.25}, {"x":2.25, "y":4.5}, {"x":3.25, "y":4.5}, {"x":4.25, "y":4.5}, {"x":5.25, "y":4.5}, {"x":6.25, "y":4.5}, {"x":7.25, "y":4.5}, {"x":8.25, "y":4.5}, {"x":9.25, "y":4.5}, {"x":10.25, "y":4.5}, {"x":11.25, "y":4.5}, {"x":12.25, "y":4.5, "w":2.75}, {"x":16.25, "y":4.5}, {"x":18.5, "y":4.5}, {"x":19.5, "y":4.5}, {"x":20.5, "y":4.5}, {"x":21.5, "y":4.5, "h":2}, {"x":0, "y":5.5, "w":1.5}, {"x":1.5, "y":5.5}, {"x":2.5, "y":5.5, "w":1.5}, {"x":4, "y":5.5, "w":5.75}, {"x":9.75, "y":5.5, "w":1.25}, {"x":11, "y":5.5, "w":1.5}, {"x":12.5, "y":5.5}, {"x":13.5, "y":5.5, "w":1.5}, {"x":15.25, "y":5.5}, {"x":16.25, "y":5.5}, {"x":17.25, "y":5.5}, {"x":18.5, "y":5.5, "w":2}, {"x":20.5, "y":5.5}] + }, + "LAYOUT_iso": { + "layout": [{"x":0, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"x":17.25, "y":0}, {"x":0, "y":1.5}, {"x":1, "y":1.5}, {"x":2, "y":1.5}, {"x":3, "y":1.5}, {"x":4, "y":1.5}, {"x":5, "y":1.5}, {"x":6, "y":1.5}, {"x":7, "y":1.5}, {"x":8, "y":1.5}, {"x":9, "y":1.5}, {"x":10, "y":1.5}, {"x":11, "y":1.5}, {"x":12, "y":1.5}, {"x":13, "y":1.5, "w":2}, {"x":15.25, "y":1.5}, {"x":16.25, "y":1.5}, {"x":17.25, "y":1.5}, {"x":18.5, "y":1.5}, {"x":19.5, "y":1.5}, {"x":20.5, "y":1.5}, {"x":21.5, "y":1.5}, {"x":0, "y":2.5, "w":1.5}, {"x":1.5, "y":2.5}, {"x":2.5, "y":2.5}, {"x":3.5, "y":2.5}, {"x":4.5, "y":2.5}, {"x":5.5, "y":2.5}, {"x":6.5, "y":2.5}, {"x":7.5, "y":2.5}, {"x":8.5, "y":2.5}, {"x":9.5, "y":2.5}, {"x":10.5, "y":2.5}, {"x":11.5, "y":2.5}, {"x":12.5, "y":2.5}, {"x":13.75, "y":2.5, "w":1.25, "h":2}, {"x":15.25, "y":2.5}, {"x":16.25, "y":2.5}, {"x":17.25, "y":2.5}, {"x":18.5, "y":2.5}, {"x":19.5, "y":2.5}, {"x":20.5, "y":2.5}, {"x":21.5, "y":2.5, "h":2}, {"x":0, "y":3.5, "w":1.75}, {"x":1.75, "y":3.5}, {"x":2.75, "y":3.5}, {"x":3.75, "y":3.5}, {"x":4.75, "y":3.5}, {"x":5.75, "y":3.5}, {"x":6.75, "y":3.5}, {"x":7.75, "y":3.5}, {"x":8.75, "y":3.5}, {"x":9.75, "y":3.5}, {"x":10.75, "y":3.5}, {"x":11.75, "y":3.5}, {"x":12.75, "y":3.5}, {"x":18.5, "y":3.5}, {"x":19.5, "y":3.5}, {"x":20.5, "y":3.5}, {"x":0, "y":4.5, "w":1.25}, {"x":1.25, "y":4.5}, {"x":2.25, "y":4.5}, {"x":3.25, "y":4.5}, {"x":4.25, "y":4.5}, {"x":5.25, "y":4.5}, {"x":6.25, "y":4.5}, {"x":7.25, "y":4.5}, {"x":8.25, "y":4.5}, {"x":9.25, "y":4.5}, {"x":10.25, "y":4.5}, {"x":11.25, "y":4.5}, {"x":12.25, "y":4.5, "w":2.75}, {"x":16.25, "y":4.5}, {"x":18.5, "y":4.5}, {"x":19.5, "y":4.5}, {"x":20.5, "y":4.5}, {"x":21.5, "y":4.5, "h":2}, {"x":0, "y":5.5, "w":1.5}, {"x":1.5, "y":5.5}, {"x":2.5, "y":5.5, "w":1.5}, {"x":4, "y":5.5, "w":5.75}, {"x":9.75, "y":5.5, "w":1.25}, {"x":11, "y":5.5, "w":1.5}, {"x":12.5, "y":5.5}, {"x":13.5, "y":5.5, "w":1.5}, {"x":15.25, "y":5.5}, {"x":16.25, "y":5.5}, {"x":17.25, "y":5.5}, {"x":18.5, "y":5.5, "w":2}, {"x":20.5, "y":5.5}] + } + } +} diff --git a/keyboards/unicomp/classic_ultracl_post_2013/keymaps/default/keymap.c b/keyboards/unicomp/classic_ultracl_post_2013/keymaps/default/keymap.c new file mode 100644 index 0000000000..4ef39ed7b4 --- /dev/null +++ b/keyboards/unicomp/classic_ultracl_post_2013/keymaps/default/keymap.c @@ -0,0 +1,33 @@ +/* Copyright 2020 Purdea Andrei + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [_BASE] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL,KC_BSPC,KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,KC_NUHS, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT,KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, + KC_LCTRL, KC_LGUI, KC_LALT, KC_NO, KC_SPC, KC_RGUI, KC_RALT, KC_APP, KC_RCTRL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_P0, KC_PDOT, KC_PENT + ) +}; diff --git a/keyboards/unicomp/classic_ultracl_post_2013/keymaps/default/readme.md b/keyboards/unicomp/classic_ultracl_post_2013/keymaps/default/readme.md new file mode 100644 index 0000000000..7ac6e45ce7 --- /dev/null +++ b/keyboards/unicomp/classic_ultracl_post_2013/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for unicomp/classic_ultracl_post_2013/$(CONTROLLER) diff --git a/keyboards/unicomp/classic_ultracl_post_2013/overnumpad_1xb/config.h b/keyboards/unicomp/classic_ultracl_post_2013/overnumpad_1xb/config.h new file mode 100644 index 0000000000..fb9a872299 --- /dev/null +++ b/keyboards/unicomp/classic_ultracl_post_2013/overnumpad_1xb/config.h @@ -0,0 +1,73 @@ +/* Copyright 2020 Purdea Andrei + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x16C0 +#define PRODUCT_ID 0x27DB +#define DEVICE_VER 0x0001 +#define MANUFACTURER Unicomp/Purdea Andrei +#define PRODUCT Unicomp Spacesaver M +#define SERIAL_NUMBER "purdea.ro:overnumpad_controller" + +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 16 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ + +// All pins in order from left-to-right, as seen on the keyboard: +// C3, C2, C1, C0, A3, A4, A5, A6, A7, C4, C5, B0, B1, B10, B12, B13, B14, B15, C6, C7, C8, C9, A8, A9, A10, +// On this chip A10, B10 have stronger pull-ups, so it's better to avoid them if possible. + +// On this keyboard the right-most pin is not used, so that is A10. +// On this keyboard the right-most 8 pins (excluding the unused pin) are routed on the bottom. + +#define MATRIX_COL_PINS { C3, C2, C1, C0, A3, A4, A5, A6, A7, C4, C5, B0, B1, B10, B12, B13 } +#define MATRIX_ROW_PINS { B14, B15, C6, C7, C8, C9, A8, A9 } +//#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION ROW2COL + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +#define MATRIX_HAS_GHOST + +#define STM32_HSECLK 16000000 + +#define SOLENOID_PIN B5 +#define SOLENOID_DEFAULT_DWELL 4 +#define SOLENOID_MIN_DWELL 4 +#define NO_HAPTIC_MOD + +#define LED_NUM_LOCK_PIN C12 +#define LED_CAPS_LOCK_PIN C11 +#define LED_SCROLL_LOCK_PIN C10 +#define LED_ON_STATE 1 diff --git a/keyboards/unicomp/classic_ultracl_post_2013/overnumpad_1xb/overnumpad_1xb.c b/keyboards/unicomp/classic_ultracl_post_2013/overnumpad_1xb/overnumpad_1xb.c new file mode 100644 index 0000000000..c4229ef997 --- /dev/null +++ b/keyboards/unicomp/classic_ultracl_post_2013/overnumpad_1xb/overnumpad_1xb.c @@ -0,0 +1,28 @@ +/* Copyright 2020 Purdea Andrei + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "overnumpad_1xb.h" + +void keyboard_post_init_kb(void) +{ + // Solenoid enable: + setPinOutput(C13); + writePin(C13, 1); + + //debug_enable=true; + //debug_matrix=true; +} + diff --git a/keyboards/unicomp/classic_ultracl_post_2013/overnumpad_1xb/overnumpad_1xb.h b/keyboards/unicomp/classic_ultracl_post_2013/overnumpad_1xb/overnumpad_1xb.h new file mode 100644 index 0000000000..a62e8cfbab --- /dev/null +++ b/keyboards/unicomp/classic_ultracl_post_2013/overnumpad_1xb/overnumpad_1xb.h @@ -0,0 +1,88 @@ +/* Copyright 2020 Purdea Andrei + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ + +#define LAYOUT_all( \ + k_esc, k_f1, k_f2, k_f3, k_f4, k_f5, k_f6, k_f7, k_f8, k_f9, k_f10, k_f11, k_f12, k_prscr, k_scrl, k_pause, \ + k_tild, k_1, k_2, k_3, k_4, k_5, k_6, k_7, k_8, k_9, k_0, k_minus, k_equals, k_bsp_hidden, k_backspace, k_ins, k_home, k_pgup, kp_nl, kp_div, kp_mult, kp_minus, \ + k_tab, k_q, k_w, k_e, k_r, k_t, k_y, k_u, k_i, k_o, k_p, k_squarebrop, k_squarebrcl, k_backsl, k_del, k_end, k_pgdn, kp_7, kp_8, kp_9, kp_plus, \ + k_caps, k_a, k_s, k_d, k_f, k_g, k_h, k_j, k_k, k_l, k_semicolon, k_singlequote, k_nuhs,k_return, kp_4, kp_5, kp_6, kp_plus_hidden, \ + k_lshift,k_nubs,k_z, k_x, k_c, k_v, k_b, k_n, k_m, k_cm,k_period, k_fwslash, k_rshift_hidden, k_rshift, k_up, kp_1, kp_2, kp_3, kp_enter, \ + k_lctrl, k_lwin, k_lalt, k_code, k_space, k_1_d, k_6_4, k_rmenu, k_rctrl, k_left, k_down, k_right, kp_0_hidden, kp_0, kp_dot, kp_enter_hidden \ +) \ +{ \ + /* 0 1 2 3 4 5 6 7 8 9 A B C D E F */ \ + /* 0 */ { k_esc, k_pause, k_f3, k_f1, k_ins, k_3, k_4, k_6, k_f5, k_f7, k_f9, k_f11, k_prscr, k_right, k_scrl, KC_NO }, \ + /* 1 */ { k_tab, KC_NO, k_del, k_pgdn, KC_NO, k_e, k_t, k_u, k_backspace, k_minus, k_down, k_end, k_home, k_1_d, KC_NO, k_caps }, \ + /* 2 */ { k_1, k_bsp_hidden, kp_nl, k_pgup, k_code, k_i, k_r, k_y, k_equals, k_9, k_0, kp_mult, kp_div, k_up, k_lwin, KC_NO }, \ + /* 3 */ { k_q, k_lshift, kp_9, k_2, KC_NO, k_k, k_f, k_h, k_squarebrcl, k_o, k_semicolon, kp_8, kp_7, KC_NO, KC_NO, k_lctrl }, \ + /* 4 */ { k_a, KC_NO, kp_6, k_w, k_lalt, k_d, k_g, k_j, k_backsl, k_squarebrop, k_singlequote, kp_5, kp_4, k_rshift_hidden, kp_plus_hidden, KC_NO }, \ + /* 5 */ { k_z, k_rshift, kp_dot, k_x, KC_NO, k_cm, k_b, k_m, k_return, k_period, k_p, kp_0, kp_1, KC_NO, kp_0_hidden, k_rctrl }, \ + /* 6 */ { k_nubs, KC_NO, kp_3, k_s, k_6_4, k_c, k_v, k_n, k_left, k_l, k_fwslash, kp_2, kp_plus, k_nuhs, kp_enter_hidden, KC_NO }, \ + /* 7 */ { k_tild, KC_NO, kp_minus, k_f2, k_f4, k_8, k_5, k_7, k_f6, k_f8, k_f10, k_f12, k_rmenu, k_space, kp_enter, KC_NO } \ +} + +#define LAYOUT_ansi( \ + k_esc, k_f1, k_f2, k_f3, k_f4, k_f5, k_f6, k_f7, k_f8, k_f9, k_f10, k_f11, k_f12, k_prscr, k_scrl, k_pause, \ + k_tild, k_1, k_2, k_3, k_4, k_5, k_6, k_7, k_8, k_9, k_0, k_minus, k_equals, k_backspace, k_ins, k_home, k_pgup, kp_nl, kp_div, kp_mult, kp_minus, \ + k_tab, k_q, k_w, k_e, k_r, k_t, k_y, k_u, k_i, k_o, k_p, k_squarebrop, k_squarebrcl, k_backsl, k_del, k_end, k_pgdn, kp_7, kp_8, kp_9, kp_plus, \ + k_caps, k_a, k_s, k_d, k_f, k_g, k_h, k_j, k_k, k_l, k_semicolon, k_singlequote, k_return, kp_4, kp_5, kp_6, \ + k_lshift, k_z, k_x, k_c, k_v, k_b, k_n, k_m, k_cm,k_period, k_fwslash, k_rshift, k_up, kp_1, kp_2, kp_3, kp_enter, \ + k_lctrl, k_lwin, k_lalt, k_space, k_1_d, k_6_4, k_rmenu, k_rctrl, k_left, k_down, k_right, kp_0, kp_dot \ +) \ +{ \ + /* 0 1 2 3 4 5 6 7 8 9 A B C D E F */ \ + /* 0 */ { k_esc, k_pause, k_f3, k_f1, k_ins, k_3, k_4, k_6, k_f5, k_f7, k_f9, k_f11, k_prscr, k_right, k_scrl, KC_NO }, \ + /* 1 */ { k_tab, KC_NO, k_del, k_pgdn, KC_NO, k_e, k_t, k_u, k_backspace, k_minus, k_down, k_end, k_home, k_1_d, KC_NO, k_caps }, \ + /* 2 */ { k_1, KC_NO, kp_nl, k_pgup, KC_NO, k_i, k_r, k_y, k_equals, k_9, k_0, kp_mult, kp_div, k_up, k_lwin, KC_NO }, \ + /* 3 */ { k_q, k_lshift, kp_9, k_2, KC_NO, k_k, k_f, k_h, k_squarebrcl, k_o, k_semicolon, kp_8, kp_7, KC_NO, KC_NO, k_lctrl }, \ + /* 4 */ { k_a, KC_NO, kp_6, k_w, k_lalt, k_d, k_g, k_j, k_backsl, k_squarebrop, k_singlequote, kp_5, kp_4, KC_NO, KC_NO, KC_NO }, \ + /* 5 */ { k_z, k_rshift, kp_dot, k_x, KC_NO, k_cm, k_b, k_m, k_return, k_period, k_p, kp_0, kp_1, KC_NO, KC_NO, k_rctrl }, \ + /* 6 */ { KC_NO, KC_NO, kp_3, k_s, k_6_4, k_c, k_v, k_n, k_left, k_l, k_fwslash, kp_2, kp_plus, KC_NO, KC_NO, KC_NO }, \ + /* 7 */ { k_tild, KC_NO, kp_minus, k_f2, k_f4, k_8, k_5, k_7, k_f6, k_f8, k_f10, k_f12, k_rmenu, k_space, kp_enter, KC_NO } \ +} + +#define LAYOUT_iso( \ + k_esc, k_f1, k_f2, k_f3, k_f4, k_f5, k_f6, k_f7, k_f8, k_f9, k_f10, k_f11, k_f12, k_prscr, k_scrl, k_pause, \ + k_tild, k_1, k_2, k_3, k_4, k_5, k_6, k_7, k_8, k_9, k_0, k_minus, k_equals, k_backspace, k_ins, k_home, k_pgup, kp_nl, kp_div, kp_mult, kp_minus, \ + k_tab, k_q, k_w, k_e, k_r, k_t, k_y, k_u, k_i, k_o, k_p, k_squarebrop, k_squarebrcl, k_return, k_del, k_end, k_pgdn, kp_7, kp_8, kp_9, kp_plus, \ + k_caps, k_a, k_s, k_d, k_f, k_g, k_h, k_j, k_k, k_l, k_semicolon, k_singlequote, k_nuhs, kp_4, kp_5, kp_6, \ + k_lshift,k_nubs,k_z, k_x, k_c, k_v, k_b, k_n, k_m, k_cm,k_period, k_fwslash, k_rshift, k_up, kp_1, kp_2, kp_3, kp_enter, \ + k_lctrl, k_lwin, k_lalt, k_space, k_1_d, k_6_4, k_rmenu, k_rctrl, k_left, k_down, k_right, kp_0, kp_dot \ +) \ +{ \ + /* 0 1 2 3 4 5 6 7 8 9 A B C D E F */ \ + /* 0 */ { k_esc, k_pause, k_f3, k_f1, k_ins, k_3, k_4, k_6, k_f5, k_f7, k_f9, k_f11, k_prscr, k_right, k_scrl, KC_NO }, \ + /* 1 */ { k_tab, KC_NO, k_del, k_pgdn, KC_NO, k_e, k_t, k_u, k_backspace, k_minus, k_down, k_end, k_home, k_1_d, KC_NO, k_caps }, \ + /* 2 */ { k_1, KC_NO, kp_nl, k_pgup, KC_NO, k_i, k_r, k_y, k_equals, k_9, k_0, kp_mult, kp_div, k_up, k_lwin, KC_NO }, \ + /* 3 */ { k_q, k_lshift, kp_9, k_2, KC_NO, k_k, k_f, k_h, k_squarebrcl, k_o, k_semicolon, kp_8, kp_7, KC_NO, KC_NO, k_lctrl }, \ + /* 4 */ { k_a, KC_NO, kp_6, k_w, k_lalt, k_d, k_g, k_j, KC_NO, k_squarebrop, k_singlequote, kp_5, kp_4, KC_NO, KC_NO, KC_NO }, \ + /* 5 */ { k_z, k_rshift, kp_dot, k_x, KC_NO, k_cm, k_b, k_m, k_return, k_period, k_p, kp_0, kp_1, KC_NO, KC_NO, k_rctrl }, \ + /* 6 */ { k_nubs, KC_NO, kp_3, k_s, k_6_4, k_c, k_v, k_n, k_left, k_l, k_fwslash, kp_2, kp_plus, k_nuhs, KC_NO, KC_NO }, \ + /* 7 */ { k_tild, KC_NO, kp_minus, k_f2, k_f4, k_8, k_5, k_7, k_f6, k_f8, k_f10, k_f12, k_rmenu, k_space, kp_enter, KC_NO } \ +} diff --git a/keyboards/unicomp/classic_ultracl_post_2013/overnumpad_1xb/readme.md b/keyboards/unicomp/classic_ultracl_post_2013/overnumpad_1xb/readme.md new file mode 100644 index 0000000000..fe8fc769e4 --- /dev/null +++ b/keyboards/unicomp/classic_ultracl_post_2013/overnumpad_1xb/readme.md @@ -0,0 +1,28 @@ +# unicomp/classic_ultracl_post_2013/overnumpad_1xb + +![unicomp/classic_ultracl_post_2013/overnumpad_1xb](https://www.pckeyboard.com/mm5/graphics/00000001/UB4ZPHA_800x343.jpg) + +Will support the following Unicomp Classic and Ultra Classic keyboards: + * 104-key ANSI and 105-key ISO keyboards with post-2013 bottom row are supported. + * It will likely also support 103-key ANSI or 104-key ISO keyboard variants (not tested) (these are the keyboards with no menu key) + * At this point in time it's unclear if it supports 101-key keyboard variants built after 2013. + +* Keyboard Maintainer: [Purdea Andrei](https://github.com/purdeaandrei) +* Hardware Supported: OverNumpad controller v1.Xb +* Hardware Availability: + * [controller](https://github.com/purdeaandrei/overnumpad_controller_1xb) + * [keyboard](https://www.pckeyboard.com/) + +To place the keyboard into bootloader mode in order to flash it, hold the ESC key while plugging the board in. +It's possible to make this feature not work, by flashing the wrong firmware onto the keyboard. +If that happens, open up the keyboard, and press the RST&PROG button to enter bootloader mode. + +Make example for this keyboard (after setting up your build environment): + + make unicomp/classic_ultracl_post_2013/overnumpad_1xb:default + +Flashing example for this keyboard: + + make unicomp/classic_ultracl_post_2013/overnumpad_1xb:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/unicomp/classic_ultracl_post_2013/overnumpad_1xb/rules.mk b/keyboards/unicomp/classic_ultracl_post_2013/overnumpad_1xb/rules.mk new file mode 100644 index 0000000000..507f4fcd37 --- /dev/null +++ b/keyboards/unicomp/classic_ultracl_post_2013/overnumpad_1xb/rules.mk @@ -0,0 +1,25 @@ +# MCU name +MCU = STM32F446 # STM32F446RET6 + +# Bootloader selection +BOOTLOADER = stm32-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enter bootloader mode when holding the ESC key. +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +ENCODER_ENABLE = no # Enable rotary encoder support +AUDIO_ENABLE = no # Audio output +KEYBOARD_SHARED_EP = yes # Free up some extra endpoints - needed if console+mouse+extra + +HAPTIC_ENABLE += SOLENOID diff --git a/keyboards/unicomp/classic_ultracl_pre_2013/info.json b/keyboards/unicomp/classic_ultracl_pre_2013/info.json new file mode 100644 index 0000000000..bedbca4f36 --- /dev/null +++ b/keyboards/unicomp/classic_ultracl_pre_2013/info.json @@ -0,0 +1,16 @@ +{ + "keyboard_name": "unicomp/classic_ultracl_pre_2013", + "url": "https://github.com/purdeaandrei/overnumpad_controller_1xb", + "maintainer": "purdeaandrei", + "layouts": { + "LAYOUT_all": { + "layout": [{"x":0, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"x":17.25, "y":0}, {"x":0, "y":1.5}, {"x":1, "y":1.5}, {"x":2, "y":1.5}, {"x":3, "y":1.5}, {"x":4, "y":1.5}, {"x":5, "y":1.5}, {"x":6, "y":1.5}, {"x":7, "y":1.5}, {"x":8, "y":1.5}, {"x":9, "y":1.5}, {"x":10, "y":1.5}, {"x":11, "y":1.5}, {"x":12, "y":1.5}, {"x":13, "y":1.5}, {"x":14, "y":1.5}, {"x":15.25, "y":1.5}, {"x":16.25, "y":1.5}, {"x":17.25, "y":1.5}, {"x":18.5, "y":1.5}, {"x":19.5, "y":1.5}, {"x":20.5, "y":1.5}, {"x":21.5, "y":1.5}, {"x":0, "y":2.5, "w":1.5}, {"x":1.5, "y":2.5}, {"x":2.5, "y":2.5}, {"x":3.5, "y":2.5}, {"x":4.5, "y":2.5}, {"x":5.5, "y":2.5}, {"x":6.5, "y":2.5}, {"x":7.5, "y":2.5}, {"x":8.5, "y":2.5}, {"x":9.5, "y":2.5}, {"x":10.5, "y":2.5}, {"x":11.5, "y":2.5}, {"x":12.5, "y":2.5}, {"x":13.5, "y":2.5, "w":1.5}, {"x":15.25, "y":2.5}, {"x":16.25, "y":2.5}, {"x":17.25, "y":2.5}, {"x":18.5, "y":2.5}, {"x":19.5, "y":2.5}, {"x":20.5, "y":2.5}, {"x":21.5, "y":2.5}, {"x":0, "y":3.5, "w":1.75}, {"x":1.75, "y":3.5}, {"x":2.75, "y":3.5}, {"x":3.75, "y":3.5}, {"x":4.75, "y":3.5}, {"x":5.75, "y":3.5}, {"x":6.75, "y":3.5}, {"x":7.75, "y":3.5}, {"x":8.75, "y":3.5}, {"x":9.75, "y":3.5}, {"x":10.75, "y":3.5}, {"x":11.75, "y":3.5}, {"x":12.75, "y":3.5}, {"x":13.75, "y":3.5, "w":1.25}, {"x":18.5, "y":3.5}, {"x":19.5, "y":3.5}, {"x":20.5, "y":3.5}, {"x":21.5, "y":3.5}, {"x":0, "y":4.5, "w":1.25}, {"x":1.25, "y":4.5}, {"x":2.25, "y":4.5}, {"x":3.25, "y":4.5}, {"x":4.25, "y":4.5}, {"x":5.25, "y":4.5}, {"x":6.25, "y":4.5}, {"x":7.25, "y":4.5}, {"x":8.25, "y":4.5}, {"x":9.25, "y":4.5}, {"x":10.25, "y":4.5}, {"x":11.25, "y":4.5}, {"x":12.25, "y":4.5}, {"x":13.25, "y":4.5, "w":1.75}, {"x":16.25, "y":4.5}, {"x":18.5, "y":4.5}, {"x":19.5, "y":4.5}, {"x":20.5, "y":4.5}, {"x":21.5, "y":4.5}, {"x":0, "y":5.5, "w":1.5}, {"x":1.5, "y":5.5, "w":1.25}, {"x":2.75, "y":5.5, "w":1.25}, {"x":4, "y":5.5}, {"x":5, "y":5.5, "w":4.75}, {"x":9.75, "y":5.5, "w":1.25}, {"x":11, "y":5.5, "w":1.25}, {"x":12.25, "y":5.5, "w":1.25}, {"x":13.5, "y":5.5, "w":1.5}, {"x":15.25, "y":5.5}, {"x":16.25, "y":5.5}, {"x":17.25, "y":5.5}, {"x":18.5, "y":5.5}, {"x":19.5, "y":5.5}, {"x":20.5, "y":5.5}, {"x":21.5, "y":5.5}] + }, + "LAYOUT_fullsize_ansi": { + "layout": [{"x":0, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"x":17.25, "y":0}, {"x":0, "y":1.5}, {"x":1, "y":1.5}, {"x":2, "y":1.5}, {"x":3, "y":1.5}, {"x":4, "y":1.5}, {"x":5, "y":1.5}, {"x":6, "y":1.5}, {"x":7, "y":1.5}, {"x":8, "y":1.5}, {"x":9, "y":1.5}, {"x":10, "y":1.5}, {"x":11, "y":1.5}, {"x":12, "y":1.5}, {"x":13, "y":1.5, "w":2}, {"x":15.25, "y":1.5}, {"x":16.25, "y":1.5}, {"x":17.25, "y":1.5}, {"x":18.5, "y":1.5}, {"x":19.5, "y":1.5}, {"x":20.5, "y":1.5}, {"x":21.5, "y":1.5}, {"x":0, "y":2.5, "w":1.5}, {"x":1.5, "y":2.5}, {"x":2.5, "y":2.5}, {"x":3.5, "y":2.5}, {"x":4.5, "y":2.5}, {"x":5.5, "y":2.5}, {"x":6.5, "y":2.5}, {"x":7.5, "y":2.5}, {"x":8.5, "y":2.5}, {"x":9.5, "y":2.5}, {"x":10.5, "y":2.5}, {"x":11.5, "y":2.5}, {"x":12.5, "y":2.5}, {"x":13.5, "y":2.5, "w":1.5}, {"x":15.25, "y":2.5}, {"x":16.25, "y":2.5}, {"x":17.25, "y":2.5}, {"x":18.5, "y":2.5}, {"x":19.5, "y":2.5}, {"x":20.5, "y":2.5}, {"x":21.5, "y":2.5, "h":2}, {"x":0, "y":3.5, "w":1.75}, {"x":1.75, "y":3.5}, {"x":2.75, "y":3.5}, {"x":3.75, "y":3.5}, {"x":4.75, "y":3.5}, {"x":5.75, "y":3.5}, {"x":6.75, "y":3.5}, {"x":7.75, "y":3.5}, {"x":8.75, "y":3.5}, {"x":9.75, "y":3.5}, {"x":10.75, "y":3.5}, {"x":11.75, "y":3.5}, {"x":12.75, "y":3.5, "w":2.25}, {"x":18.5, "y":3.5}, {"x":19.5, "y":3.5}, {"x":20.5, "y":3.5}, {"x":0, "y":4.5, "w":2.25}, {"x":2.25, "y":4.5}, {"x":3.25, "y":4.5}, {"x":4.25, "y":4.5}, {"x":5.25, "y":4.5}, {"x":6.25, "y":4.5}, {"x":7.25, "y":4.5}, {"x":8.25, "y":4.5}, {"x":9.25, "y":4.5}, {"x":10.25, "y":4.5}, {"x":11.25, "y":4.5}, {"x":12.25, "y":4.5, "w":2.75}, {"x":16.25, "y":4.5}, {"x":18.5, "y":4.5}, {"x":19.5, "y":4.5}, {"x":20.5, "y":4.5}, {"x":21.5, "y":4.5, "h":2}, {"x":0, "y":5.5, "w":1.5}, {"x":1.5, "y":5.5, "w":1.25}, {"x":2.75, "y":5.5, "w":1.25}, {"x":4, "y":5.5, "w":5.75}, {"x":9.75, "y":5.5, "w":1.25}, {"x":11, "y":5.5, "w":1.25}, {"x":12.25, "y":5.5, "w":1.25}, {"x":13.5, "y":5.5, "w":1.5}, {"x":15.25, "y":5.5}, {"x":16.25, "y":5.5}, {"x":17.25, "y":5.5}, {"x":18.5, "y":5.5, "w":2}, {"x":20.5, "y":5.5}] + }, + "LAYOUT_fullsize_iso": { + "layout": [{"x":0, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"x":17.25, "y":0}, {"x":0, "y":1.5}, {"x":1, "y":1.5}, {"x":2, "y":1.5}, {"x":3, "y":1.5}, {"x":4, "y":1.5}, {"x":5, "y":1.5}, {"x":6, "y":1.5}, {"x":7, "y":1.5}, {"x":8, "y":1.5}, {"x":9, "y":1.5}, {"x":10, "y":1.5}, {"x":11, "y":1.5}, {"x":12, "y":1.5}, {"x":13, "y":1.5, "w":2}, {"x":15.25, "y":1.5}, {"x":16.25, "y":1.5}, {"x":17.25, "y":1.5}, {"x":18.5, "y":1.5}, {"x":19.5, "y":1.5}, {"x":20.5, "y":1.5}, {"x":21.5, "y":1.5}, {"x":0, "y":2.5, "w":1.5}, {"x":1.5, "y":2.5}, {"x":2.5, "y":2.5}, {"x":3.5, "y":2.5}, {"x":4.5, "y":2.5}, {"x":5.5, "y":2.5}, {"x":6.5, "y":2.5}, {"x":7.5, "y":2.5}, {"x":8.5, "y":2.5}, {"x":9.5, "y":2.5}, {"x":10.5, "y":2.5}, {"x":11.5, "y":2.5}, {"x":12.5, "y":2.5}, {"x":15.25, "y":2.5}, {"x":16.25, "y":2.5}, {"x":17.25, "y":2.5}, {"x":18.5, "y":2.5}, {"x":19.5, "y":2.5}, {"x":20.5, "y":2.5}, {"x":21.5, "y":2.5, "h":2}, {"x":0, "y":3.5, "w":1.75}, {"x":1.75, "y":3.5}, {"x":2.75, "y":3.5}, {"x":3.75, "y":3.5}, {"x":4.75, "y":3.5}, {"x":5.75, "y":3.5}, {"x":6.75, "y":3.5}, {"x":7.75, "y":3.5}, {"x":8.75, "y":3.5}, {"x":9.75, "y":3.5}, {"x":10.75, "y":3.5}, {"x":11.75, "y":3.5}, {"x":12.75, "y":3.5}, {"x":13.75, "y":2.5, "w":1.25, "h":2}, {"x":18.5, "y":3.5}, {"x":19.5, "y":3.5}, {"x":20.5, "y":3.5}, {"x":0, "y":4.5, "w":1.25}, {"x":1.25, "y":4.5}, {"x":2.25, "y":4.5}, {"x":3.25, "y":4.5}, {"x":4.25, "y":4.5}, {"x":5.25, "y":4.5}, {"x":6.25, "y":4.5}, {"x":7.25, "y":4.5}, {"x":8.25, "y":4.5}, {"x":9.25, "y":4.5}, {"x":10.25, "y":4.5}, {"x":11.25, "y":4.5}, {"x":12.25, "y":4.5, "w":2.75}, {"x":16.25, "y":4.5}, {"x":18.5, "y":4.5}, {"x":19.5, "y":4.5}, {"x":20.5, "y":4.5}, {"x":21.5, "y":4.5, "h":2}, {"x":0, "y":5.5, "w":1.5}, {"x":1.5, "y":5.5, "w":1.25}, {"x":2.75, "y":5.5, "w":1.25}, {"x":4, "y":5.5, "w":5.75}, {"x":9.75, "y":5.5, "w":1.25}, {"x":11, "y":5.5, "w":1.25}, {"x":12.25, "y":5.5, "w":1.25}, {"x":13.5, "y":5.5, "w":1.5}, {"x":15.25, "y":5.5}, {"x":16.25, "y":5.5}, {"x":17.25, "y":5.5}, {"x":18.5, "y":5.5, "w":2}, {"x":20.5, "y":5.5}] + } + } +} diff --git a/keyboards/unicomp/classic_ultracl_pre_2013/keymaps/default/keymap.c b/keyboards/unicomp/classic_ultracl_pre_2013/keymaps/default/keymap.c new file mode 100644 index 0000000000..6755ee3684 --- /dev/null +++ b/keyboards/unicomp/classic_ultracl_pre_2013/keymaps/default/keymap.c @@ -0,0 +1,33 @@ +/* Copyright 2020 Purdea Andrei + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [_BASE] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL,KC_BSPC,KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,KC_NUHS, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT,KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, + KC_LCTRL, KC_LGUI, KC_LALT, KC_NO, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTRL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_P0, KC_PDOT, KC_PENT + ) +}; diff --git a/keyboards/unicomp/classic_ultracl_pre_2013/keymaps/default/readme.md b/keyboards/unicomp/classic_ultracl_pre_2013/keymaps/default/readme.md new file mode 100644 index 0000000000..f9a7d214fa --- /dev/null +++ b/keyboards/unicomp/classic_ultracl_pre_2013/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for unicomp/classic_ultracl_pre_2013/$(CONTROLLER) diff --git a/keyboards/unicomp/classic_ultracl_pre_2013/overnumpad_1xb/config.h b/keyboards/unicomp/classic_ultracl_pre_2013/overnumpad_1xb/config.h new file mode 100644 index 0000000000..fb9a872299 --- /dev/null +++ b/keyboards/unicomp/classic_ultracl_pre_2013/overnumpad_1xb/config.h @@ -0,0 +1,73 @@ +/* Copyright 2020 Purdea Andrei + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x16C0 +#define PRODUCT_ID 0x27DB +#define DEVICE_VER 0x0001 +#define MANUFACTURER Unicomp/Purdea Andrei +#define PRODUCT Unicomp Spacesaver M +#define SERIAL_NUMBER "purdea.ro:overnumpad_controller" + +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 16 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ + +// All pins in order from left-to-right, as seen on the keyboard: +// C3, C2, C1, C0, A3, A4, A5, A6, A7, C4, C5, B0, B1, B10, B12, B13, B14, B15, C6, C7, C8, C9, A8, A9, A10, +// On this chip A10, B10 have stronger pull-ups, so it's better to avoid them if possible. + +// On this keyboard the right-most pin is not used, so that is A10. +// On this keyboard the right-most 8 pins (excluding the unused pin) are routed on the bottom. + +#define MATRIX_COL_PINS { C3, C2, C1, C0, A3, A4, A5, A6, A7, C4, C5, B0, B1, B10, B12, B13 } +#define MATRIX_ROW_PINS { B14, B15, C6, C7, C8, C9, A8, A9 } +//#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION ROW2COL + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +#define MATRIX_HAS_GHOST + +#define STM32_HSECLK 16000000 + +#define SOLENOID_PIN B5 +#define SOLENOID_DEFAULT_DWELL 4 +#define SOLENOID_MIN_DWELL 4 +#define NO_HAPTIC_MOD + +#define LED_NUM_LOCK_PIN C12 +#define LED_CAPS_LOCK_PIN C11 +#define LED_SCROLL_LOCK_PIN C10 +#define LED_ON_STATE 1 diff --git a/keyboards/unicomp/classic_ultracl_pre_2013/overnumpad_1xb/overnumpad_1xb.c b/keyboards/unicomp/classic_ultracl_pre_2013/overnumpad_1xb/overnumpad_1xb.c new file mode 100644 index 0000000000..c4229ef997 --- /dev/null +++ b/keyboards/unicomp/classic_ultracl_pre_2013/overnumpad_1xb/overnumpad_1xb.c @@ -0,0 +1,28 @@ +/* Copyright 2020 Purdea Andrei + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "overnumpad_1xb.h" + +void keyboard_post_init_kb(void) +{ + // Solenoid enable: + setPinOutput(C13); + writePin(C13, 1); + + //debug_enable=true; + //debug_matrix=true; +} + diff --git a/keyboards/unicomp/classic_ultracl_pre_2013/overnumpad_1xb/overnumpad_1xb.h b/keyboards/unicomp/classic_ultracl_pre_2013/overnumpad_1xb/overnumpad_1xb.h new file mode 100644 index 0000000000..a939e986dd --- /dev/null +++ b/keyboards/unicomp/classic_ultracl_pre_2013/overnumpad_1xb/overnumpad_1xb.h @@ -0,0 +1,88 @@ +/* Copyright 2020 Purdea Andrei + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ + +#define LAYOUT_all( \ + k_esc, k_f1, k_f2, k_f3, k_f4, k_f5, k_f6, k_f7, k_f8, k_f9, k_f10, k_f11, k_f12, k_prscr, k_scrl, k_pause, \ + k_tild, k_1, k_2, k_3, k_4, k_5, k_6, k_7, k_8, k_9, k_0, k_minus, k_equals, k_bsp_hidden, k_backspace, k_ins, k_home, k_pgup, kp_nl, kp_div, kp_mult, kp_minus, \ + k_tab, k_q, k_w, k_e, k_r, k_t, k_y, k_u, k_i, k_o, k_p, k_squarebrop, k_squarebrcl, k_backsl, k_del, k_end, k_pgdn, kp_7, kp_8, kp_9, kp_plus, \ + k_caps, k_a, k_s, k_d, k_f, k_g, k_h, k_j, k_k, k_l, k_semicolon, k_singlequote, k_nuhs,k_return, kp_4, kp_5, kp_6, kp_plus_hidden, \ + k_lshift,k_nubs,k_z, k_x, k_c, k_v, k_b, k_n, k_m, k_cm,k_period, k_fwslash, k_rshift_hidden, k_rshift, k_up, kp_1, kp_2, kp_3, kp_enter, \ + k_lctrl, k_lwin, k_lalt, k_code, k_space, k_6_4, k_1_d, k_rmenu, k_rctrl, k_left, k_down, k_right, kp_0_hidden, kp_0, kp_dot, kp_enter_hidden \ +) \ +{ \ + /* 0 1 2 3 4 5 6 7 8 9 A B C D E F */ \ + /* 0 */ { k_esc, k_pause, k_f3, k_f1, k_ins, k_3, k_4, k_6, k_f5, k_f7, k_f9, k_f11, k_prscr, k_right, k_scrl, KC_NO }, \ + /* 1 */ { k_tab, KC_NO, k_del, k_pgdn, KC_NO, k_e, k_t, k_u, k_backspace, k_minus, k_down, k_end, k_home, k_1_d, KC_NO, k_caps }, \ + /* 2 */ { k_1, k_bsp_hidden, kp_nl, k_pgup, k_code, k_i, k_r, k_y, k_equals, k_9, k_0, kp_mult, kp_div, k_up, k_lwin, KC_NO }, \ + /* 3 */ { k_q, k_lshift, kp_9, k_2, KC_NO, k_k, k_f, k_h, k_squarebrcl, k_o, k_semicolon, kp_8, kp_7, KC_NO, KC_NO, k_lctrl }, \ + /* 4 */ { k_a, KC_NO, kp_6, k_w, k_lalt, k_d, k_g, k_j, k_backsl, k_squarebrop, k_singlequote, kp_5, kp_4, k_rshift_hidden, kp_plus_hidden, KC_NO }, \ + /* 5 */ { k_z, k_rshift, kp_dot, k_x, KC_NO, k_cm, k_b, k_m, k_return, k_period, k_p, kp_0, kp_1, KC_NO, kp_0_hidden, k_rctrl }, \ + /* 6 */ { k_nubs, KC_NO, kp_3, k_s, k_6_4, k_c, k_v, k_n, k_left, k_l, k_fwslash, kp_2, kp_plus, k_nuhs, kp_enter_hidden, KC_NO }, \ + /* 7 */ { k_tild, KC_NO, kp_minus, k_f2, k_f4, k_8, k_5, k_7, k_f6, k_f8, k_f10, k_f12, k_rmenu, k_space, kp_enter, KC_NO } \ +} + +#define LAYOUT_fullsize_ansi( \ + k_esc, k_f1, k_f2, k_f3, k_f4, k_f5, k_f6, k_f7, k_f8, k_f9, k_f10, k_f11, k_f12, k_prscr, k_scrl, k_pause, \ + k_tild, k_1, k_2, k_3, k_4, k_5, k_6, k_7, k_8, k_9, k_0, k_minus, k_equals, k_backspace, k_ins, k_home, k_pgup, kp_nl, kp_div, kp_mult, kp_minus, \ + k_tab, k_q, k_w, k_e, k_r, k_t, k_y, k_u, k_i, k_o, k_p, k_squarebrop, k_squarebrcl, k_backsl, k_del, k_end, k_pgdn, kp_7, kp_8, kp_9, kp_plus, \ + k_caps, k_a, k_s, k_d, k_f, k_g, k_h, k_j, k_k, k_l, k_semicolon, k_singlequote, k_return, kp_4, kp_5, kp_6, \ + k_lshift, k_z, k_x, k_c, k_v, k_b, k_n, k_m, k_cm,k_period, k_fwslash, k_rshift, k_up, kp_1, kp_2, kp_3, kp_enter, \ + k_lctrl, k_lwin, k_lalt, k_space, k_6_4, k_1_d, k_rmenu, k_rctrl, k_left, k_down, k_right, kp_0, kp_dot \ +) \ +{ \ + /* 0 1 2 3 4 5 6 7 8 9 A B C D E F */ \ + /* 0 */ { k_esc, k_pause, k_f3, k_f1, k_ins, k_3, k_4, k_6, k_f5, k_f7, k_f9, k_f11, k_prscr, k_right, k_scrl, KC_NO }, \ + /* 1 */ { k_tab, KC_NO, k_del, k_pgdn, KC_NO, k_e, k_t, k_u, k_backspace, k_minus, k_down, k_end, k_home, k_1_d, KC_NO, k_caps }, \ + /* 2 */ { k_1, KC_NO, kp_nl, k_pgup, KC_NO, k_i, k_r, k_y, k_equals, k_9, k_0, kp_mult, kp_div, k_up, k_lwin, KC_NO }, \ + /* 3 */ { k_q, k_lshift, kp_9, k_2, KC_NO, k_k, k_f, k_h, k_squarebrcl, k_o, k_semicolon, kp_8, kp_7, KC_NO, KC_NO, k_lctrl }, \ + /* 4 */ { k_a, KC_NO, kp_6, k_w, k_lalt, k_d, k_g, k_j, k_backsl, k_squarebrop, k_singlequote, kp_5, kp_4, KC_NO, KC_NO, KC_NO }, \ + /* 5 */ { k_z, k_rshift, kp_dot, k_x, KC_NO, k_cm, k_b, k_m, k_return, k_period, k_p, kp_0, kp_1, KC_NO, KC_NO, k_rctrl }, \ + /* 6 */ { KC_NO, KC_NO, kp_3, k_s, k_6_4, k_c, k_v, k_n, k_left, k_l, k_fwslash, kp_2, kp_plus, KC_NO, KC_NO, KC_NO }, \ + /* 7 */ { k_tild, KC_NO, kp_minus, k_f2, k_f4, k_8, k_5, k_7, k_f6, k_f8, k_f10, k_f12, k_rmenu, k_space, kp_enter, KC_NO } \ +} + +#define LAYOUT_fullsize_iso( \ + k_esc, k_f1, k_f2, k_f3, k_f4, k_f5, k_f6, k_f7, k_f8, k_f9, k_f10, k_f11, k_f12, k_prscr, k_scrl, k_pause, \ + k_tild, k_1, k_2, k_3, k_4, k_5, k_6, k_7, k_8, k_9, k_0, k_minus, k_equals, k_backspace, k_ins, k_home, k_pgup, kp_nl, kp_div, kp_mult, kp_minus, \ + k_tab, k_q, k_w, k_e, k_r, k_t, k_y, k_u, k_i, k_o, k_p, k_squarebrop, k_squarebrcl, k_del, k_end, k_pgdn, kp_7, kp_8, kp_9, kp_plus, \ + k_caps, k_a, k_s, k_d, k_f, k_g, k_h, k_j, k_k, k_l, k_semicolon, k_singlequote, k_nuhs,k_return, kp_4, kp_5, kp_6, \ + k_lshift,k_nubs,k_z, k_x, k_c, k_v, k_b, k_n, k_m, k_cm,k_period, k_fwslash, k_rshift, k_up, kp_1, kp_2, kp_3, kp_enter, \ + k_lctrl, k_lwin, k_lalt, k_space, k_6_4, k_1_d, k_rmenu, k_rctrl, k_left, k_down, k_right, kp_0, kp_dot \ +) \ +{ \ + /* 0 1 2 3 4 5 6 7 8 9 A B C D E F */ \ + /* 0 */ { k_esc, k_pause, k_f3, k_f1, k_ins, k_3, k_4, k_6, k_f5, k_f7, k_f9, k_f11, k_prscr, k_right, k_scrl, KC_NO }, \ + /* 1 */ { k_tab, KC_NO, k_del, k_pgdn, KC_NO, k_e, k_t, k_u, k_backspace, k_minus, k_down, k_end, k_home, k_1_d, KC_NO, k_caps }, \ + /* 2 */ { k_1, KC_NO, kp_nl, k_pgup, KC_NO, k_i, k_r, k_y, k_equals, k_9, k_0, kp_mult, kp_div, k_up, k_lwin, KC_NO }, \ + /* 3 */ { k_q, k_lshift, kp_9, k_2, KC_NO, k_k, k_f, k_h, k_squarebrcl, k_o, k_semicolon, kp_8, kp_7, KC_NO, KC_NO, k_lctrl }, \ + /* 4 */ { k_a, KC_NO, kp_6, k_w, k_lalt, k_d, k_g, k_j, KC_NO, k_squarebrop, k_singlequote, kp_5, kp_4, KC_NO, KC_NO, KC_NO }, \ + /* 5 */ { k_z, k_rshift, kp_dot, k_x, KC_NO, k_cm, k_b, k_m, k_return, k_period, k_p, kp_0, kp_1, KC_NO, KC_NO, k_rctrl }, \ + /* 6 */ { k_nubs, KC_NO, kp_3, k_s, k_6_4, k_c, k_v, k_n, k_left, k_l, k_fwslash, kp_2, kp_plus, k_nuhs, KC_NO, KC_NO }, \ + /* 7 */ { k_tild, KC_NO, kp_minus, k_f2, k_f4, k_8, k_5, k_7, k_f6, k_f8, k_f10, k_f12, k_rmenu, k_space, kp_enter, KC_NO } \ +} diff --git a/keyboards/unicomp/classic_ultracl_pre_2013/overnumpad_1xb/readme.md b/keyboards/unicomp/classic_ultracl_pre_2013/overnumpad_1xb/readme.md new file mode 100644 index 0000000000..c25024b477 --- /dev/null +++ b/keyboards/unicomp/classic_ultracl_pre_2013/overnumpad_1xb/readme.md @@ -0,0 +1,26 @@ +# unicomp/classic_ultracl_pre_2013/overnumpad_1xb + +![unicomp/classic_ultracl_pre_2013/overnumpad_1xb](https://www.pckeyboard.com/mm5/graphics/00000001/UB4ZPHA_800x343.jpg) + +Will support the following Unicomp Classic and Ultra Classic keyboards: + * 104-key ANSI and 105-key ISO keyboards with post-2013 bottom row are supported. + +* Keyboard Maintainer: [Purdea Andrei](https://github.com/purdeaandrei) +* Hardware Supported: OverNumpad controller v1.Xb +* Hardware Availability: + * [controller](https://github.com/purdeaandrei/overnumpad_controller_1xb) + * [keyboard](https://www.pckeyboard.com/) + +To place the keyboard into bootloader mode in order to flash it, hold the ESC key while plugging the board in. +It's possible to make this feature not work, by flashing the wrong firmware onto the keyboard. +If that happens, open up the keyboard, and press the RST&PROG button to enter bootloader mode. + +Make example for this keyboard (after setting up your build environment): + + make unicomp/classic_ultracl_pre_2013/overnumpad_1xb:default + +Flashing example for this keyboard: + + make unicomp/classic_ultracl_pre_2013/overnumpad_1xb:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/unicomp/classic_ultracl_pre_2013/overnumpad_1xb/rules.mk b/keyboards/unicomp/classic_ultracl_pre_2013/overnumpad_1xb/rules.mk new file mode 100644 index 0000000000..30eb89bb7e --- /dev/null +++ b/keyboards/unicomp/classic_ultracl_pre_2013/overnumpad_1xb/rules.mk @@ -0,0 +1,26 @@ +# MCU name +MCU = STM32F446 # STM32F446RET6 + +# Bootloader selection +BOOTLOADER = stm32-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enter bootloader mode when holding the ESC key. +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +ENCODER_ENABLE = no # Enable rotary encoder support +AUDIO_ENABLE = no # Audio output +KEYBOARD_SHARED_EP = yes # Free up some extra endpoints - needed if console+mouse+extra + +HAPTIC_ENABLE += SOLENOID +LAYOUTS = fullsize_ansi fullsize_iso diff --git a/keyboards/unicomp/spacesaver_m_post_2013/info.json b/keyboards/unicomp/spacesaver_m_post_2013/info.json new file mode 100644 index 0000000000..766a93e6c6 --- /dev/null +++ b/keyboards/unicomp/spacesaver_m_post_2013/info.json @@ -0,0 +1,16 @@ +{ + "keyboard_name": "unicomp/spacesaver_m_post_2013", + "url": "https://github.com/purdeaandrei/overnumpad_controller_1xb", + "maintainer": "purdeaandrei", + "layouts": { + "LAYOUT_all": { + "layout": [{"x":0, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"x":17.25, "y":0}, {"x":0, "y":1.5}, {"x":1, "y":1.5}, {"x":2, "y":1.5}, {"x":3, "y":1.5}, {"x":4, "y":1.5}, {"x":5, "y":1.5}, {"x":6, "y":1.5}, {"x":7, "y":1.5}, {"x":8, "y":1.5}, {"x":9, "y":1.5}, {"x":10, "y":1.5}, {"x":11, "y":1.5}, {"x":12, "y":1.5}, {"x":13, "y":1.5}, {"x":14, "y":1.5}, {"x":15.25, "y":1.5}, {"x":16.25, "y":1.5}, {"x":17.25, "y":1.5}, {"x":18.5, "y":1.5}, {"x":19.5, "y":1.5}, {"x":20.5, "y":1.5}, {"x":21.5, "y":1.5}, {"x":0, "y":2.5, "w":1.5}, {"x":1.5, "y":2.5}, {"x":2.5, "y":2.5}, {"x":3.5, "y":2.5}, {"x":4.5, "y":2.5}, {"x":5.5, "y":2.5}, {"x":6.5, "y":2.5}, {"x":7.5, "y":2.5}, {"x":8.5, "y":2.5}, {"x":9.5, "y":2.5}, {"x":10.5, "y":2.5}, {"x":11.5, "y":2.5}, {"x":12.5, "y":2.5}, {"x":13.5, "y":2.5, "w":1.5}, {"x":15.25, "y":2.5}, {"x":16.25, "y":2.5}, {"x":17.25, "y":2.5}, {"x":18.5, "y":2.5}, {"x":19.5, "y":2.5}, {"x":20.5, "y":2.5}, {"x":21.5, "y":2.5}, {"x":0, "y":3.5, "w":1.75}, {"x":1.75, "y":3.5}, {"x":2.75, "y":3.5}, {"x":3.75, "y":3.5}, {"x":4.75, "y":3.5}, {"x":5.75, "y":3.5}, {"x":6.75, "y":3.5}, {"x":7.75, "y":3.5}, {"x":8.75, "y":3.5}, {"x":9.75, "y":3.5}, {"x":10.75, "y":3.5}, {"x":11.75, "y":3.5}, {"x":12.75, "y":3.5}, {"x":13.75, "y":3.5, "w":1.25}, {"x":18.5, "y":3.5}, {"x":19.5, "y":3.5}, {"x":20.5, "y":3.5}, {"x":21.5, "y":3.5}, {"x":0, "y":4.5, "w":1.25}, {"x":1.25, "y":4.5}, {"x":2.25, "y":4.5}, {"x":3.25, "y":4.5}, {"x":4.25, "y":4.5}, {"x":5.25, "y":4.5}, {"x":6.25, "y":4.5}, {"x":7.25, "y":4.5}, {"x":8.25, "y":4.5}, {"x":9.25, "y":4.5}, {"x":10.25, "y":4.5}, {"x":11.25, "y":4.5}, {"x":12.25, "y":4.5}, {"x":13.25, "y":4.5, "w":1.75}, {"x":16.25, "y":4.5}, {"x":18.5, "y":4.5}, {"x":19.5, "y":4.5}, {"x":20.5, "y":4.5}, {"x":21.5, "y":4.5}, {"x":0, "y":5.5, "w":1.5}, {"x":1.5, "y":5.5}, {"x":2.5, "y":5.5, "w":1.5}, {"x":4, "y":5.5}, {"x":5, "y":5.5, "w":4.75}, {"x":9.75, "y":5.5, "w":1.25}, {"x":11, "y":5.5, "w":1.5}, {"x":12.5, "y":5.5}, {"x":13.5, "y":5.5, "w":1.5}, {"x":15.25, "y":5.5}, {"x":16.25, "y":5.5}, {"x":17.25, "y":5.5}, {"x":18.5, "y":5.5}, {"x":19.5, "y":5.5}, {"x":20.5, "y":5.5}, {"x":21.5, "y":5.5}] + }, + "LAYOUT_ansi": { + "layout": [{"x":0, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"x":17.25, "y":0}, {"x":0, "y":1.5}, {"x":1, "y":1.5}, {"x":2, "y":1.5}, {"x":3, "y":1.5}, {"x":4, "y":1.5}, {"x":5, "y":1.5}, {"x":6, "y":1.5}, {"x":7, "y":1.5}, {"x":8, "y":1.5}, {"x":9, "y":1.5}, {"x":10, "y":1.5}, {"x":11, "y":1.5}, {"x":12, "y":1.5}, {"x":13, "y":1.5, "w":2}, {"x":15.25, "y":1.5}, {"x":16.25, "y":1.5}, {"x":17.25, "y":1.5}, {"x":18.5, "y":1.5}, {"x":19.5, "y":1.5}, {"x":20.5, "y":1.5}, {"x":21.5, "y":1.5}, {"x":0, "y":2.5, "w":1.5}, {"x":1.5, "y":2.5}, {"x":2.5, "y":2.5}, {"x":3.5, "y":2.5}, {"x":4.5, "y":2.5}, {"x":5.5, "y":2.5}, {"x":6.5, "y":2.5}, {"x":7.5, "y":2.5}, {"x":8.5, "y":2.5}, {"x":9.5, "y":2.5}, {"x":10.5, "y":2.5}, {"x":11.5, "y":2.5}, {"x":12.5, "y":2.5}, {"x":13.5, "y":2.5, "w":1.5}, {"x":15.25, "y":2.5}, {"x":16.25, "y":2.5}, {"x":17.25, "y":2.5}, {"x":18.5, "y":2.5}, {"x":19.5, "y":2.5}, {"x":20.5, "y":2.5}, {"x":21.5, "y":2.5}, {"x":0, "y":3.5, "w":1.75}, {"x":1.75, "y":3.5}, {"x":2.75, "y":3.5}, {"x":3.75, "y":3.5}, {"x":4.75, "y":3.5}, {"x":5.75, "y":3.5}, {"x":6.75, "y":3.5}, {"x":7.75, "y":3.5}, {"x":8.75, "y":3.5}, {"x":9.75, "y":3.5}, {"x":10.75, "y":3.5}, {"x":11.75, "y":3.5}, {"x":12.75, "y":3.5, "w":2.25}, {"x":18.5, "y":3.5}, {"x":19.5, "y":3.5}, {"x":20.5, "y":3.5}, {"x":21.5, "y":3.5}, {"x":0, "y":4.5, "w":2.25}, {"x":2.25, "y":4.5}, {"x":3.25, "y":4.5}, {"x":4.25, "y":4.5}, {"x":5.25, "y":4.5}, {"x":6.25, "y":4.5}, {"x":7.25, "y":4.5}, {"x":8.25, "y":4.5}, {"x":9.25, "y":4.5}, {"x":10.25, "y":4.5}, {"x":11.25, "y":4.5}, {"x":12.25, "y":4.5, "w":2.75}, {"x":16.25, "y":4.5}, {"x":18.5, "y":4.5}, {"x":19.5, "y":4.5}, {"x":20.5, "y":4.5}, {"x":21.5, "y":4.5, "h":2}, {"x":0, "y":5.5, "w":1.5}, {"x":1.5, "y":5.5}, {"x":2.5, "y":5.5, "w":1.5}, {"x":4, "y":5.5, "w":5.75}, {"x":9.75, "y":5.5, "w":1.25}, {"x":11, "y":5.5, "w":1.5}, {"x":12.5, "y":5.5}, {"x":13.5, "y":5.5, "w":1.5}, {"x":15.25, "y":5.5}, {"x":16.25, "y":5.5}, {"x":17.25, "y":5.5}, {"x":18.5, "y":5.5, "w":2}, {"x":20.5, "y":5.5}] + }, + "LAYOUT_iso": { + "layout": [{"x":0, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"x":17.25, "y":0}, {"x":0, "y":1.5}, {"x":1, "y":1.5}, {"x":2, "y":1.5}, {"x":3, "y":1.5}, {"x":4, "y":1.5}, {"x":5, "y":1.5}, {"x":6, "y":1.5}, {"x":7, "y":1.5}, {"x":8, "y":1.5}, {"x":9, "y":1.5}, {"x":10, "y":1.5}, {"x":11, "y":1.5}, {"x":12, "y":1.5}, {"x":13, "y":1.5, "w":2}, {"x":15.25, "y":1.5}, {"x":16.25, "y":1.5}, {"x":17.25, "y":1.5}, {"x":18.5, "y":1.5}, {"x":19.5, "y":1.5}, {"x":20.5, "y":1.5}, {"x":21.5, "y":1.5}, {"x":0, "y":2.5, "w":1.5}, {"x":1.5, "y":2.5}, {"x":2.5, "y":2.5}, {"x":3.5, "y":2.5}, {"x":4.5, "y":2.5}, {"x":5.5, "y":2.5}, {"x":6.5, "y":2.5}, {"x":7.5, "y":2.5}, {"x":8.5, "y":2.5}, {"x":9.5, "y":2.5}, {"x":10.5, "y":2.5}, {"x":11.5, "y":2.5}, {"x":12.5, "y":2.5}, {"x":13.75, "y":2.5, "w":1.25, "h":2}, {"x":15.25, "y":2.5}, {"x":16.25, "y":2.5}, {"x":17.25, "y":2.5}, {"x":18.5, "y":2.5}, {"x":19.5, "y":2.5}, {"x":20.5, "y":2.5}, {"x":21.5, "y":2.5}, {"x":0, "y":3.5, "w":1.75}, {"x":1.75, "y":3.5}, {"x":2.75, "y":3.5}, {"x":3.75, "y":3.5}, {"x":4.75, "y":3.5}, {"x":5.75, "y":3.5}, {"x":6.75, "y":3.5}, {"x":7.75, "y":3.5}, {"x":8.75, "y":3.5}, {"x":9.75, "y":3.5}, {"x":10.75, "y":3.5}, {"x":11.75, "y":3.5}, {"x":12.75, "y":3.5}, {"x":18.5, "y":3.5}, {"x":19.5, "y":3.5}, {"x":20.5, "y":3.5}, {"x":21.5, "y":3.5}, {"x":0, "y":4.5, "w":1.25}, {"x":1.25, "y":4.5}, {"x":2.25, "y":4.5}, {"x":3.25, "y":4.5}, {"x":4.25, "y":4.5}, {"x":5.25, "y":4.5}, {"x":6.25, "y":4.5}, {"x":7.25, "y":4.5}, {"x":8.25, "y":4.5}, {"x":9.25, "y":4.5}, {"x":10.25, "y":4.5}, {"x":11.25, "y":4.5}, {"x":12.25, "y":4.5, "w":2.75}, {"x":16.25, "y":4.5}, {"x":18.5, "y":4.5}, {"x":19.5, "y":4.5}, {"x":20.5, "y":4.5}, {"x":21.5, "y":4.5, "h":2}, {"x":0, "y":5.5, "w":1.5}, {"x":1.5, "y":5.5}, {"x":2.5, "y":5.5, "w":1.5}, {"x":4, "y":5.5, "w":5.75}, {"x":9.75, "y":5.5, "w":1.25}, {"x":11, "y":5.5, "w":1.5}, {"x":12.5, "y":5.5}, {"x":13.5, "y":5.5, "w":1.5}, {"x":15.25, "y":5.5}, {"x":16.25, "y":5.5}, {"x":17.25, "y":5.5}, {"x":18.5, "y":5.5, "w":2}, {"x":20.5, "y":5.5}] + } + } +} diff --git a/keyboards/unicomp/spacesaver_m_post_2013/keymaps/default/keymap.c b/keyboards/unicomp/spacesaver_m_post_2013/keymaps/default/keymap.c new file mode 100644 index 0000000000..08a9be07f5 --- /dev/null +++ b/keyboards/unicomp/spacesaver_m_post_2013/keymaps/default/keymap.c @@ -0,0 +1,42 @@ +/* Copyright 2020 Purdea Andrei + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [_BASE] = LAYOUT_all( + KC_ESC, KC_F14,KC_F15,LCTL(KC_UP),KC_F9, KC_F5, KC_F6,KC_MPRV,KC_MPLY, KC_MNXT,KC_MUTE,KC_VOLD,KC_VOLU, KC_F13, KC_F14, KC_F15, + KC_NUBS,KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL,KC_BSPC,KC_BSPC, KC_EJCT, KC_HOME, KC_PGUP, KC_NLCK, KC_PEQL, KC_PSLS, KC_PAST, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PMNS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,KC_NUHS, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT,KC_GRV, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, + KC_LCTRL, KC_LALT, KC_LGUI, KC_NO, KC_SPC, KC_RGUI, KC_RALT, MO(_FN), KC_RCTRL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_P0, KC_PDOT, KC_PENT + ), + [_FN] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_NUBS,KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL,KC_BSPC,KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_EQL, KC_PSLS, KC_PAST, + KC_TAB, KC_Q, KC_W,EEPROM_RESET,RESET,KC_T,KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PMNS, + KC_CAPS, KC_A, KC_S,DEBUG, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,KC_NUHS, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT,KC_GRV, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, + KC_LCTRL, KC_LALT, KC_LGUI, KC_NO, KC_SPC, KC_RGUI, KC_RALT, MO(_FN), KC_RCTRL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_P0, KC_PDOT, KC_PENT + ) +}; diff --git a/keyboards/unicomp/spacesaver_m_post_2013/keymaps/default/readme.md b/keyboards/unicomp/spacesaver_m_post_2013/keymaps/default/readme.md new file mode 100644 index 0000000000..5e44dade26 --- /dev/null +++ b/keyboards/unicomp/spacesaver_m_post_2013/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for unicomp/spacesaver_m_post_2013/$(CONTROLLER) diff --git a/keyboards/unicomp/spacesaver_m_post_2013/overnumpad_1xb/config.h b/keyboards/unicomp/spacesaver_m_post_2013/overnumpad_1xb/config.h new file mode 100644 index 0000000000..bfb1a9cf68 --- /dev/null +++ b/keyboards/unicomp/spacesaver_m_post_2013/overnumpad_1xb/config.h @@ -0,0 +1,72 @@ +/* Copyright 2020 Purdea Andrei + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x16C0 +#define PRODUCT_ID 0x27DB +#define DEVICE_VER 0x0001 +#define MANUFACTURER Unicomp/Purdea Andrei +#define PRODUCT Unicomp Spacesaver M +#define SERIAL_NUMBER "purdea.ro:overnumpad_controller" + +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 16 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ + +// All pins in order from left-to-right, as seen on the keyboard: +// C3, C2, C1, C0, A3, A4, A5, A6, A7, C4, C5, B0, B1, B10, B12, B13, B14, B15, C6, C7, C8, C9, A8, A9, A10, +// On this chip A10, B10 have stronger pull-ups, so it's better to avoid them if possible. + +// On this keyboard the right-most pin is not used, so that is A10. +// On this keyboard the right-most 8 pins (excluding the unused pin) are routed on the bottom. + +#define MATRIX_COL_PINS { C3, C2, C1, C0, A3, A4, A5, A6, A7, C4, C5, B0, B1, B10, B12, B13 } +#define MATRIX_ROW_PINS { B14, B15, C6, C7, C8, C9, A8, A9 } +//#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION ROW2COL + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +#define MATRIX_HAS_GHOST + +#define STM32_HSECLK 16000000 + +#define SOLENOID_PIN B5 +#define SOLENOID_DEFAULT_DWELL 4 +#define SOLENOID_MIN_DWELL 4 +#define NO_HAPTIC_MOD + +#define LED_CAPS_LOCK_PIN C12 +#define LED_ON_STATE 1 +// C11 and C10 are also leds, but C11 is not used in this keyboard, and C10 is configured in ${keyboard}.c diff --git a/keyboards/unicomp/spacesaver_m_post_2013/overnumpad_1xb/overnumpad_1xb.c b/keyboards/unicomp/spacesaver_m_post_2013/overnumpad_1xb/overnumpad_1xb.c new file mode 100644 index 0000000000..41f51b7575 --- /dev/null +++ b/keyboards/unicomp/spacesaver_m_post_2013/overnumpad_1xb/overnumpad_1xb.c @@ -0,0 +1,45 @@ +/* Copyright 2020 Purdea Andrei + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "overnumpad_1xb.h" + +void keyboard_post_init_kb(void) +{ + // Led pins: + // C12 is the left-most led, normally Num Lock, but on Spacesaver M it's Caps Lock. Configured in config.h + setPinOutput(C11); // middle led, always off on Spacesaver M + writePin(C11, 0); + setPinOutput(C10); // right-most led, normally Scroll Lock, but on Spacesaver M indicates function layer + // Solenoid enable: + setPinOutput(C13); + writePin(C13, 1); + + //debug_enable=true; + //debug_matrix=true; +} + + +layer_state_t layer_state_set_kb(layer_state_t state) { + switch (get_highest_layer(state)) { + case 0: + writePin(C10, 0); + break; + default: + writePin(C10, 1); + break; + } + return layer_state_set_user(state); +} diff --git a/keyboards/unicomp/spacesaver_m_post_2013/overnumpad_1xb/overnumpad_1xb.h b/keyboards/unicomp/spacesaver_m_post_2013/overnumpad_1xb/overnumpad_1xb.h new file mode 100644 index 0000000000..faffbcd4ec --- /dev/null +++ b/keyboards/unicomp/spacesaver_m_post_2013/overnumpad_1xb/overnumpad_1xb.h @@ -0,0 +1,88 @@ +/* Copyright 2020 Purdea Andrei + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ + +#define LAYOUT_all( \ + k_esc, k_f1, k_f2, k_f3, k_f4, k_f5, k_f6, k_f7, k_f8, k_f9, k_f10, k_f11, k_f12, k_prscr, k_scrl, k_pause, \ + k_tild, k_1, k_2, k_3, k_4, k_5, k_6, k_7, k_8, k_9, k_0, k_minus, k_equals, k_bsp_hidden, k_backspace, k_ins, k_home, k_pgup, kp_nl, kp_div, kp_mult, kp_minus, \ + k_tab, k_q, k_w, k_e, k_r, k_t, k_y, k_u, k_i, k_o, k_p, k_squarebrop, k_squarebrcl, k_backsl, k_del, k_end, k_pgdn, kp_7, kp_8, kp_9, kp_plus, \ + k_caps, k_a, k_s, k_d, k_f, k_g, k_h, k_j, k_k, k_l, k_semicolon, k_singlequote, k_nuhs,k_return, kp_4, kp_5, kp_6, kp_plus_hidden, \ + k_lshift,k_nubs,k_z, k_x, k_c, k_v, k_b, k_n, k_m, k_cm,k_period, k_fwslash, k_rshift_hidden, k_rshift, k_up, kp_1, kp_2, kp_3, kp_enter, \ + k_lctrl, k_lwin, k_lalt, k_code, k_space, k_1_d, k_6_4, k_rmenu, k_rctrl, k_left, k_down, k_right, kp_0_hidden, kp_0, kp_dot, kp_enter_hidden \ +) \ +{ \ + /* 0 1 2 3 4 5 6 7 8 9 A B C D E F */ \ + /* 0 */ { k_esc, k_pause, k_f3, k_f1, k_ins, k_3, k_4, k_6, k_f5, k_f7, k_f9, k_f11, k_prscr, k_right, k_scrl, KC_NO }, \ + /* 1 */ { k_tab, KC_NO, k_del, k_pgdn, KC_NO, k_e, k_t, k_u, k_backspace, k_minus, k_down, k_end, k_home, k_1_d, KC_NO, k_caps }, \ + /* 2 */ { k_1, k_bsp_hidden, kp_nl, k_pgup, k_code, k_i, k_r, k_y, k_equals, k_9, k_0, kp_mult, kp_div, k_up, k_lwin, KC_NO }, \ + /* 3 */ { k_q, k_lshift, kp_9, k_2, KC_NO, k_k, k_f, k_h, k_squarebrcl, k_o, k_semicolon, kp_8, kp_7, KC_NO, KC_NO, k_lctrl }, \ + /* 4 */ { k_a, KC_NO, kp_6, k_w, k_lalt, k_d, k_g, k_j, k_backsl, k_squarebrop, k_singlequote, kp_5, kp_4, k_rshift_hidden, kp_plus_hidden, KC_NO }, \ + /* 5 */ { k_z, k_rshift, kp_dot, k_x, KC_NO, k_cm, k_b, k_m, k_return, k_period, k_p, kp_0, kp_1, KC_NO, kp_0_hidden, k_rctrl }, \ + /* 6 */ { k_nubs, KC_NO, kp_3, k_s, k_6_4, k_c, k_v, k_n, k_left, k_l, k_fwslash, kp_2, kp_plus, k_nuhs, kp_enter_hidden, KC_NO }, \ + /* 7 */ { k_tild, KC_NO, kp_minus, k_f2, k_f4, k_8, k_5, k_7, k_f6, k_f8, k_f10, k_f12, k_rmenu, k_space, kp_enter, KC_NO } \ +} + +#define LAYOUT_ansi( \ + k_esc, k_f1, k_f2, k_f3, k_f4, k_f5, k_f6, k_f7, k_f8, k_f9, k_f10, k_f11, k_f12, k_prscr, k_scrl, k_pause, \ + k_tild, k_1, k_2, k_3, k_4, k_5, k_6, k_7, k_8, k_9, k_0, k_minus, k_equals, k_backspace, k_ins, k_home, k_pgup, kp_nl, kp_div, kp_mult, kp_minus, \ + k_tab, k_q, k_w, k_e, k_r, k_t, k_y, k_u, k_i, k_o, k_p, k_squarebrop, k_squarebrcl, k_backsl, k_del, k_end, k_pgdn, kp_7, kp_8, kp_9, kp_plus, \ + k_caps, k_a, k_s, k_d, k_f, k_g, k_h, k_j, k_k, k_l, k_semicolon, k_singlequote, k_return, kp_4, kp_5, kp_6, kp_plus_hidden, \ + k_lshift, k_z, k_x, k_c, k_v, k_b, k_n, k_m, k_cm,k_period, k_fwslash, k_rshift, k_up, kp_1, kp_2, kp_3, kp_enter, \ + k_lctrl, k_lwin, k_lalt, k_space, k_1_d, k_6_4, k_rmenu, k_rctrl, k_left, k_down, k_right, kp_0, kp_dot \ +) \ +{ \ + /* 0 1 2 3 4 5 6 7 8 9 A B C D E F */ \ + /* 0 */ { k_esc, k_pause, k_f3, k_f1, k_ins, k_3, k_4, k_6, k_f5, k_f7, k_f9, k_f11, k_prscr, k_right, k_scrl, KC_NO }, \ + /* 1 */ { k_tab, KC_NO, k_del, k_pgdn, KC_NO, k_e, k_t, k_u, k_backspace, k_minus, k_down, k_end, k_home, k_1_d, KC_NO, k_caps }, \ + /* 2 */ { k_1, KC_NO, kp_nl, k_pgup, KC_NO, k_i, k_r, k_y, k_equals, k_9, k_0, kp_mult, kp_div, k_up, k_lwin, KC_NO }, \ + /* 3 */ { k_q, k_lshift, kp_9, k_2, KC_NO, k_k, k_f, k_h, k_squarebrcl, k_o, k_semicolon, kp_8, kp_7, KC_NO, KC_NO, k_lctrl }, \ + /* 4 */ { k_a, KC_NO, kp_6, k_w, k_lalt, k_d, k_g, k_j, k_backsl, k_squarebrop, k_singlequote, kp_5, kp_4, KC_NO, kp_plus_hidden, KC_NO }, \ + /* 5 */ { k_z, k_rshift, kp_dot, k_x, KC_NO, k_cm, k_b, k_m, k_return, k_period, k_p, kp_0, kp_1, KC_NO, KC_NO, k_rctrl }, \ + /* 6 */ { KC_NO, KC_NO, kp_3, k_s, k_6_4, k_c, k_v, k_n, k_left, k_l, k_fwslash, kp_2, kp_plus, KC_NO, KC_NO, KC_NO }, \ + /* 7 */ { k_tild, KC_NO, kp_minus, k_f2, k_f4, k_8, k_5, k_7, k_f6, k_f8, k_f10, k_f12, k_rmenu, k_space, kp_enter, KC_NO } \ +} + +#define LAYOUT_iso( \ + k_esc, k_f1, k_f2, k_f3, k_f4, k_f5, k_f6, k_f7, k_f8, k_f9, k_f10, k_f11, k_f12, k_prscr, k_scrl, k_pause, \ + k_tild, k_1, k_2, k_3, k_4, k_5, k_6, k_7, k_8, k_9, k_0, k_minus, k_equals, k_backspace, k_ins, k_home, k_pgup, kp_nl, kp_div, kp_mult, kp_minus, \ + k_tab, k_q, k_w, k_e, k_r, k_t, k_y, k_u, k_i, k_o, k_p, k_squarebrop, k_squarebrcl, k_return, k_del, k_end, k_pgdn, kp_7, kp_8, kp_9, kp_plus, \ + k_caps, k_a, k_s, k_d, k_f, k_g, k_h, k_j, k_k, k_l, k_semicolon, k_singlequote, k_nuhs, kp_4, kp_5, kp_6, kp_plus_hidden, \ + k_lshift,k_nubs,k_z, k_x, k_c, k_v, k_b, k_n, k_m, k_cm,k_period, k_fwslash, k_rshift, k_up, kp_1, kp_2, kp_3, kp_enter, \ + k_lctrl, k_lwin, k_lalt, k_space, k_1_d, k_6_4, k_rmenu, k_rctrl, k_left, k_down, k_right, kp_0, kp_dot \ +) \ +{ \ + /* 0 1 2 3 4 5 6 7 8 9 A B C D E F */ \ + /* 0 */ { k_esc, k_pause, k_f3, k_f1, k_ins, k_3, k_4, k_6, k_f5, k_f7, k_f9, k_f11, k_prscr, k_right, k_scrl, KC_NO }, \ + /* 1 */ { k_tab, KC_NO, k_del, k_pgdn, KC_NO, k_e, k_t, k_u, k_backspace, k_minus, k_down, k_end, k_home, k_1_d, KC_NO, k_caps }, \ + /* 2 */ { k_1, KC_NO, kp_nl, k_pgup, KC_NO, k_i, k_r, k_y, k_equals, k_9, k_0, kp_mult, kp_div, k_up, k_lwin, KC_NO }, \ + /* 3 */ { k_q, k_lshift, kp_9, k_2, KC_NO, k_k, k_f, k_h, k_squarebrcl, k_o, k_semicolon, kp_8, kp_7, KC_NO, KC_NO, k_lctrl }, \ + /* 4 */ { k_a, KC_NO, kp_6, k_w, k_lalt, k_d, k_g, k_j, KC_NO, k_squarebrop, k_singlequote, kp_5, kp_4, KC_NO, kp_plus_hidden, KC_NO }, \ + /* 5 */ { k_z, k_rshift, kp_dot, k_x, KC_NO, k_cm, k_b, k_m, k_return, k_period, k_p, kp_0, kp_1, KC_NO, KC_NO, k_rctrl }, \ + /* 6 */ { k_nubs, KC_NO, kp_3, k_s, k_6_4, k_c, k_v, k_n, k_left, k_l, k_fwslash, kp_2, kp_plus, k_nuhs, KC_NO, KC_NO }, \ + /* 7 */ { k_tild, KC_NO, kp_minus, k_f2, k_f4, k_8, k_5, k_7, k_f6, k_f8, k_f10, k_f12, k_rmenu, k_space, kp_enter, KC_NO } \ +} diff --git a/keyboards/unicomp/spacesaver_m_post_2013/overnumpad_1xb/readme.md b/keyboards/unicomp/spacesaver_m_post_2013/overnumpad_1xb/readme.md new file mode 100644 index 0000000000..0292269247 --- /dev/null +++ b/keyboards/unicomp/spacesaver_m_post_2013/overnumpad_1xb/readme.md @@ -0,0 +1,25 @@ +# unicomp/spacesaver_m_post_2013/overnumpad_1xb + +![unicomp/spacesaver_m_post_2013/overnumpad_1xb](https://www.pckeyboard.com/mm5/graphics/00000001/UB4ZPHA_800x343.jpg) + +Initially will support part number U242S6A, remains to be seen how compatible it is with other part numbers. + +* Keyboard Maintainer: [Purdea Andrei](https://github.com/purdeaandrei) +* Hardware Supported: OverNumpad controller v1.Xb +* Hardware Availability: TODO + * [controller](https://github.com/purdeaandrei/overnumpad_controller_1xb) + * [keyboard](https://www.pckeyboard.com/) + +To place the keyboard into bootloader mode in order to flash it, hold the ESC key while plugging the board in. +It's possible to make this feature not work, by flashing the wrong firmware onto the keyboard. +If that happens, open up the keyboard, and press the RST&PROG button to enter bootloader mode. + +Make example for this keyboard (after setting up your build environment): + + make unicomp/spacesaver_m_post_2013/overnumpad_1xb:default + +Flashing example for this keyboard: + + make unicomp/spacesaver_m_post_2013/overnumpad_1xb:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/unicomp/spacesaver_m_post_2013/overnumpad_1xb/rules.mk b/keyboards/unicomp/spacesaver_m_post_2013/overnumpad_1xb/rules.mk new file mode 100644 index 0000000000..507f4fcd37 --- /dev/null +++ b/keyboards/unicomp/spacesaver_m_post_2013/overnumpad_1xb/rules.mk @@ -0,0 +1,25 @@ +# MCU name +MCU = STM32F446 # STM32F446RET6 + +# Bootloader selection +BOOTLOADER = stm32-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enter bootloader mode when holding the ESC key. +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +ENCODER_ENABLE = no # Enable rotary encoder support +AUDIO_ENABLE = no # Audio output +KEYBOARD_SHARED_EP = yes # Free up some extra endpoints - needed if console+mouse+extra + +HAPTIC_ENABLE += SOLENOID diff --git a/keyboards/unicomp/spacesaver_m_pre_2013/info.json b/keyboards/unicomp/spacesaver_m_pre_2013/info.json new file mode 100644 index 0000000000..e912d82ead --- /dev/null +++ b/keyboards/unicomp/spacesaver_m_pre_2013/info.json @@ -0,0 +1,16 @@ +{ + "keyboard_name": "unicomp/spacesaver_m_pre_2013", + "url": "https://github.com/purdeaandrei/overnumpad_controller_1xb", + "maintainer": "purdeaandrei", + "layouts": { + "LAYOUT_all": { + "layout": [{"x":0, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"x":17.25, "y":0}, {"x":0, "y":1.5}, {"x":1, "y":1.5}, {"x":2, "y":1.5}, {"x":3, "y":1.5}, {"x":4, "y":1.5}, {"x":5, "y":1.5}, {"x":6, "y":1.5}, {"x":7, "y":1.5}, {"x":8, "y":1.5}, {"x":9, "y":1.5}, {"x":10, "y":1.5}, {"x":11, "y":1.5}, {"x":12, "y":1.5}, {"x":13, "y":1.5}, {"x":14, "y":1.5}, {"x":15.25, "y":1.5}, {"x":16.25, "y":1.5}, {"x":17.25, "y":1.5}, {"x":18.5, "y":1.5}, {"x":19.5, "y":1.5}, {"x":20.5, "y":1.5}, {"x":21.5, "y":1.5}, {"x":0, "y":2.5, "w":1.5}, {"x":1.5, "y":2.5}, {"x":2.5, "y":2.5}, {"x":3.5, "y":2.5}, {"x":4.5, "y":2.5}, {"x":5.5, "y":2.5}, {"x":6.5, "y":2.5}, {"x":7.5, "y":2.5}, {"x":8.5, "y":2.5}, {"x":9.5, "y":2.5}, {"x":10.5, "y":2.5}, {"x":11.5, "y":2.5}, {"x":12.5, "y":2.5}, {"x":13.5, "y":2.5, "w":1.5}, {"x":15.25, "y":2.5}, {"x":16.25, "y":2.5}, {"x":17.25, "y":2.5}, {"x":18.5, "y":2.5}, {"x":19.5, "y":2.5}, {"x":20.5, "y":2.5}, {"x":21.5, "y":2.5}, {"x":0, "y":3.5, "w":1.75}, {"x":1.75, "y":3.5}, {"x":2.75, "y":3.5}, {"x":3.75, "y":3.5}, {"x":4.75, "y":3.5}, {"x":5.75, "y":3.5}, {"x":6.75, "y":3.5}, {"x":7.75, "y":3.5}, {"x":8.75, "y":3.5}, {"x":9.75, "y":3.5}, {"x":10.75, "y":3.5}, {"x":11.75, "y":3.5}, {"x":12.75, "y":3.5}, {"x":13.75, "y":3.5, "w":1.25}, {"x":18.5, "y":3.5}, {"x":19.5, "y":3.5}, {"x":20.5, "y":3.5}, {"x":21.5, "y":3.5}, {"x":0, "y":4.5, "w":1.25}, {"x":1.25, "y":4.5}, {"x":2.25, "y":4.5}, {"x":3.25, "y":4.5}, {"x":4.25, "y":4.5}, {"x":5.25, "y":4.5}, {"x":6.25, "y":4.5}, {"x":7.25, "y":4.5}, {"x":8.25, "y":4.5}, {"x":9.25, "y":4.5}, {"x":10.25, "y":4.5}, {"x":11.25, "y":4.5}, {"x":12.25, "y":4.5}, {"x":13.25, "y":4.5, "w":1.75}, {"x":16.25, "y":4.5}, {"x":18.5, "y":4.5}, {"x":19.5, "y":4.5}, {"x":20.5, "y":4.5}, {"x":21.5, "y":4.5}, {"x":0, "y":5.5, "w":1.5}, {"x":1.5, "y":5.5, "w":1.25}, {"x":2.75, "y":5.5, "w":1.25}, {"x":4, "y":5.5}, {"x":5, "y":5.5, "w":4.75}, {"x":9.75, "y":5.5, "w":1.25}, {"x":11, "y":5.5, "w":1.25}, {"x":12.25, "y":5.5, "w":1.25}, {"x":13.5, "y":5.5, "w":1.5}, {"x":15.25, "y":5.5}, {"x":16.25, "y":5.5}, {"x":17.25, "y":5.5}, {"x":18.5, "y":5.5}, {"x":19.5, "y":5.5}, {"x":20.5, "y":5.5}, {"x":21.5, "y":5.5}] + }, + "LAYOUT_ansi": { + "layout": [{"x":0, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"x":17.25, "y":0}, {"x":0, "y":1.5}, {"x":1, "y":1.5}, {"x":2, "y":1.5}, {"x":3, "y":1.5}, {"x":4, "y":1.5}, {"x":5, "y":1.5}, {"x":6, "y":1.5}, {"x":7, "y":1.5}, {"x":8, "y":1.5}, {"x":9, "y":1.5}, {"x":10, "y":1.5}, {"x":11, "y":1.5}, {"x":12, "y":1.5}, {"x":13, "y":1.5, "w":2}, {"x":15.25, "y":1.5}, {"x":16.25, "y":1.5}, {"x":17.25, "y":1.5}, {"x":18.5, "y":1.5}, {"x":19.5, "y":1.5}, {"x":20.5, "y":1.5}, {"x":21.5, "y":1.5}, {"x":0, "y":2.5, "w":1.5}, {"x":1.5, "y":2.5}, {"x":2.5, "y":2.5}, {"x":3.5, "y":2.5}, {"x":4.5, "y":2.5}, {"x":5.5, "y":2.5}, {"x":6.5, "y":2.5}, {"x":7.5, "y":2.5}, {"x":8.5, "y":2.5}, {"x":9.5, "y":2.5}, {"x":10.5, "y":2.5}, {"x":11.5, "y":2.5}, {"x":12.5, "y":2.5}, {"x":13.5, "y":2.5, "w":1.5}, {"x":15.25, "y":2.5}, {"x":16.25, "y":2.5}, {"x":17.25, "y":2.5}, {"x":18.5, "y":2.5}, {"x":19.5, "y":2.5}, {"x":20.5, "y":2.5}, {"x":21.5, "y":2.5}, {"x":0, "y":3.5, "w":1.75}, {"x":1.75, "y":3.5}, {"x":2.75, "y":3.5}, {"x":3.75, "y":3.5}, {"x":4.75, "y":3.5}, {"x":5.75, "y":3.5}, {"x":6.75, "y":3.5}, {"x":7.75, "y":3.5}, {"x":8.75, "y":3.5}, {"x":9.75, "y":3.5}, {"x":10.75, "y":3.5}, {"x":11.75, "y":3.5}, {"x":12.75, "y":3.5, "w":2.25}, {"x":18.5, "y":3.5}, {"x":19.5, "y":3.5}, {"x":20.5, "y":3.5}, {"x":21.5, "y":3.5}, {"x":0, "y":4.5, "w":2.25}, {"x":2.25, "y":4.5}, {"x":3.25, "y":4.5}, {"x":4.25, "y":4.5}, {"x":5.25, "y":4.5}, {"x":6.25, "y":4.5}, {"x":7.25, "y":4.5}, {"x":8.25, "y":4.5}, {"x":9.25, "y":4.5}, {"x":10.25, "y":4.5}, {"x":11.25, "y":4.5}, {"x":12.25, "y":4.5, "w":2.75}, {"x":16.25, "y":4.5}, {"x":18.5, "y":4.5}, {"x":19.5, "y":4.5}, {"x":20.5, "y":4.5}, {"x":21.5, "y":4.5, "h":2}, {"x":0, "y":5.5, "w":1.5}, {"x":1.5, "y":5.5, "w":1.25}, {"x":2.75, "y":5.5, "w":1.25}, {"x":4, "y":5.5, "w":5.75}, {"x":9.75, "y":5.5, "w":1.25}, {"x":11, "y":5.5, "w":1.25}, {"x":12.25, "y":5.5, "w":1.25}, {"x":13.5, "y":5.5, "w":1.5}, {"x":15.25, "y":5.5}, {"x":16.25, "y":5.5}, {"x":17.25, "y":5.5}, {"x":18.5, "y":5.5, "w":2}, {"x":20.5, "y":5.5}] + }, + "LAYOUT_iso": { + "layout": [{"x":0, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"x":17.25, "y":0}, {"x":0, "y":1.5}, {"x":1, "y":1.5}, {"x":2, "y":1.5}, {"x":3, "y":1.5}, {"x":4, "y":1.5}, {"x":5, "y":1.5}, {"x":6, "y":1.5}, {"x":7, "y":1.5}, {"x":8, "y":1.5}, {"x":9, "y":1.5}, {"x":10, "y":1.5}, {"x":11, "y":1.5}, {"x":12, "y":1.5}, {"x":13, "y":1.5, "w":2}, {"x":15.25, "y":1.5}, {"x":16.25, "y":1.5}, {"x":17.25, "y":1.5}, {"x":18.5, "y":1.5}, {"x":19.5, "y":1.5}, {"x":20.5, "y":1.5}, {"x":21.5, "y":1.5}, {"x":0, "y":2.5, "w":1.5}, {"x":1.5, "y":2.5}, {"x":2.5, "y":2.5}, {"x":3.5, "y":2.5}, {"x":4.5, "y":2.5}, {"x":5.5, "y":2.5}, {"x":6.5, "y":2.5}, {"x":7.5, "y":2.5}, {"x":8.5, "y":2.5}, {"x":9.5, "y":2.5}, {"x":10.5, "y":2.5}, {"x":11.5, "y":2.5}, {"x":12.5, "y":2.5}, {"x":13.75, "y":2.5, "w":1.25, "h":2}, {"x":15.25, "y":2.5}, {"x":16.25, "y":2.5}, {"x":17.25, "y":2.5}, {"x":18.5, "y":2.5}, {"x":19.5, "y":2.5}, {"x":20.5, "y":2.5}, {"x":21.5, "y":2.5}, {"x":0, "y":3.5, "w":1.75}, {"x":1.75, "y":3.5}, {"x":2.75, "y":3.5}, {"x":3.75, "y":3.5}, {"x":4.75, "y":3.5}, {"x":5.75, "y":3.5}, {"x":6.75, "y":3.5}, {"x":7.75, "y":3.5}, {"x":8.75, "y":3.5}, {"x":9.75, "y":3.5}, {"x":10.75, "y":3.5}, {"x":11.75, "y":3.5}, {"x":12.75, "y":3.5}, {"x":18.5, "y":3.5}, {"x":19.5, "y":3.5}, {"x":20.5, "y":3.5}, {"x":21.5, "y":3.5}, {"x":0, "y":4.5, "w":1.25}, {"x":1.25, "y":4.5}, {"x":2.25, "y":4.5}, {"x":3.25, "y":4.5}, {"x":4.25, "y":4.5}, {"x":5.25, "y":4.5}, {"x":6.25, "y":4.5}, {"x":7.25, "y":4.5}, {"x":8.25, "y":4.5}, {"x":9.25, "y":4.5}, {"x":10.25, "y":4.5}, {"x":11.25, "y":4.5}, {"x":12.25, "y":4.5, "w":2.75}, {"x":16.25, "y":4.5}, {"x":18.5, "y":4.5}, {"x":19.5, "y":4.5}, {"x":20.5, "y":4.5}, {"x":21.5, "y":4.5, "h":2}, {"x":0, "y":5.5, "w":1.5}, {"x":1.5, "y":5.5, "w":1.25}, {"x":2.75, "y":5.5, "w":1.25}, {"x":4, "y":5.5, "w":5.75}, {"x":9.75, "y":5.5, "w":1.25}, {"x":11, "y":5.5, "w":1.25}, {"x":12.25, "y":5.5, "w":1.25}, {"x":13.5, "y":5.5, "w":1.5}, {"x":15.25, "y":5.5}, {"x":16.25, "y":5.5}, {"x":17.25, "y":5.5}, {"x":18.5, "y":5.5, "w":2}, {"x":20.5, "y":5.5}] + } + } +} diff --git a/keyboards/unicomp/spacesaver_m_pre_2013/keymaps/default/keymap.c b/keyboards/unicomp/spacesaver_m_pre_2013/keymaps/default/keymap.c new file mode 100644 index 0000000000..08a9be07f5 --- /dev/null +++ b/keyboards/unicomp/spacesaver_m_pre_2013/keymaps/default/keymap.c @@ -0,0 +1,42 @@ +/* Copyright 2020 Purdea Andrei + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [_BASE] = LAYOUT_all( + KC_ESC, KC_F14,KC_F15,LCTL(KC_UP),KC_F9, KC_F5, KC_F6,KC_MPRV,KC_MPLY, KC_MNXT,KC_MUTE,KC_VOLD,KC_VOLU, KC_F13, KC_F14, KC_F15, + KC_NUBS,KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL,KC_BSPC,KC_BSPC, KC_EJCT, KC_HOME, KC_PGUP, KC_NLCK, KC_PEQL, KC_PSLS, KC_PAST, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PMNS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,KC_NUHS, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT,KC_GRV, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, + KC_LCTRL, KC_LALT, KC_LGUI, KC_NO, KC_SPC, KC_RGUI, KC_RALT, MO(_FN), KC_RCTRL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_P0, KC_PDOT, KC_PENT + ), + [_FN] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_NUBS,KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL,KC_BSPC,KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_EQL, KC_PSLS, KC_PAST, + KC_TAB, KC_Q, KC_W,EEPROM_RESET,RESET,KC_T,KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PMNS, + KC_CAPS, KC_A, KC_S,DEBUG, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,KC_NUHS, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT,KC_GRV, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, + KC_LCTRL, KC_LALT, KC_LGUI, KC_NO, KC_SPC, KC_RGUI, KC_RALT, MO(_FN), KC_RCTRL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_P0, KC_PDOT, KC_PENT + ) +}; diff --git a/keyboards/unicomp/spacesaver_m_pre_2013/keymaps/default/readme.md b/keyboards/unicomp/spacesaver_m_pre_2013/keymaps/default/readme.md new file mode 100644 index 0000000000..f19d75c936 --- /dev/null +++ b/keyboards/unicomp/spacesaver_m_pre_2013/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for unicomp/spacesaver_m_pre_2013/$(CONTROLLER) diff --git a/keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/config.h b/keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/config.h new file mode 100644 index 0000000000..f3ce89431e --- /dev/null +++ b/keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/config.h @@ -0,0 +1,73 @@ +/* Copyright 2020 Purdea Andrei + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x16C0 +#define PRODUCT_ID 0x27DB +#define DEVICE_VER 0x0001 +#define MANUFACTURER Unicomp/Purdea Andrei +#define PRODUCT Unicomp Spacesaver M +#define DESCRIPTION QMK firmware for the Unicomp Spacesaver M keyboard with a replacement Overnumpad controller +#define SERIAL_NUMBER "purdea.ro:overnumpad_controller" + +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 16 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ + +// All pins in order from left-to-right, as seen on the keyboard: +// C3, C2, C1, C0, A3, A4, A5, A6, A7, C4, C5, B0, B1, B10, B12, B13, B14, B15, C6, C7, C8, C9, A8, A9, A10, +// On this chip A10, B10 have stronger pull-ups, so it's better to avoid them if possible. + +// On this keyboard the right-most pin is not used, so that is A10. +// On this keyboard the right-most 8 pins (excluding the unused pin) are routed on the bottom. + +#define MATRIX_COL_PINS { C3, C2, C1, C0, A3, A4, A5, A6, A7, C4, C5, B0, B1, B10, B12, B13 } +#define MATRIX_ROW_PINS { B14, B15, C6, C7, C8, C9, A8, A9 } +//#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION ROW2COL + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +#define MATRIX_HAS_GHOST + +#define STM32_HSECLK 16000000 + +#define SOLENOID_PIN B5 +#define SOLENOID_DEFAULT_DWELL 4 +#define SOLENOID_MIN_DWELL 4 +#define NO_HAPTIC_MOD + +#define LED_CAPS_LOCK_PIN C12 +#define LED_ON_STATE 1 +// C11 and C10 are also leds, but C11 is not used in this keyboard, and C10 is configured in ${keyboard}.c diff --git a/keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/overnumpad_1xb.c b/keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/overnumpad_1xb.c new file mode 100644 index 0000000000..5d91eae20e --- /dev/null +++ b/keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/overnumpad_1xb.c @@ -0,0 +1,44 @@ +/* Copyright 2020 Purdea Andrei + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "overnumpad_1xb.h" + +void keyboard_post_init_kb(void) +{ + // Led pins: + // C12 is the left-most led, normally Num Lock, but on Spacesaver M it's Caps Lock. Configured in config.h + setPinOutput(C11); // middle led, always off on Spacesaver M + writePin(C11, 0); + setPinOutput(C10); // right-most led, normally Scroll Lock, but on Spacesaver M indicates function layer + // Solenoid enable: + setPinOutput(C13); + writePin(C13, 1); + + //debug_enable=true; + //debug_matrix=true; +} + +layer_state_t layer_state_set_kb(layer_state_t state) { + switch (get_highest_layer(state)) { + case 0: + writePin(C10, 0); + break; + default: + writePin(C10, 1); + break; + } + return layer_state_set_user(state); +} diff --git a/keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/overnumpad_1xb.h b/keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/overnumpad_1xb.h new file mode 100644 index 0000000000..0938d456d1 --- /dev/null +++ b/keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/overnumpad_1xb.h @@ -0,0 +1,88 @@ +/* Copyright 2020 Purdea Andrei + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ + +#define LAYOUT_all( \ + k_esc, k_f1, k_f2, k_f3, k_f4, k_f5, k_f6, k_f7, k_f8, k_f9, k_f10, k_f11, k_f12, k_prscr, k_scrl, k_pause, \ + k_tild, k_1, k_2, k_3, k_4, k_5, k_6, k_7, k_8, k_9, k_0, k_minus, k_equals, k_bsp_hidden, k_backspace, k_ins, k_home, k_pgup, kp_nl, kp_div, kp_mult, kp_minus, \ + k_tab, k_q, k_w, k_e, k_r, k_t, k_y, k_u, k_i, k_o, k_p, k_squarebrop, k_squarebrcl, k_backsl, k_del, k_end, k_pgdn, kp_7, kp_8, kp_9, kp_plus, \ + k_caps, k_a, k_s, k_d, k_f, k_g, k_h, k_j, k_k, k_l, k_semicolon, k_singlequote, k_nuhs,k_return, kp_4, kp_5, kp_6, kp_plus_hidden, \ + k_lshift,k_nubs,k_z, k_x, k_c, k_v, k_b, k_n, k_m, k_cm,k_period, k_fwslash, k_rshift_hidden, k_rshift, k_up, kp_1, kp_2, kp_3, kp_enter, \ + k_lctrl, k_lwin, k_lalt, k_code, k_space, k_6_4, k_1_d, k_rmenu, k_rctrl, k_left, k_down, k_right, kp_0_hidden, kp_0, kp_dot, kp_enter_hidden \ +) \ +{ \ + /* 0 1 2 3 4 5 6 7 8 9 A B C D E F */ \ + /* 0 */ { k_esc, k_pause, k_f3, k_f1, k_ins, k_3, k_4, k_6, k_f5, k_f7, k_f9, k_f11, k_prscr, k_right, k_scrl, KC_NO }, \ + /* 1 */ { k_tab, KC_NO, k_del, k_pgdn, KC_NO, k_e, k_t, k_u, k_backspace, k_minus, k_down, k_end, k_home, k_1_d, KC_NO, k_caps }, \ + /* 2 */ { k_1, k_bsp_hidden, kp_nl, k_pgup, k_code, k_i, k_r, k_y, k_equals, k_9, k_0, kp_mult, kp_div, k_up, k_lwin, KC_NO }, \ + /* 3 */ { k_q, k_lshift, kp_9, k_2, KC_NO, k_k, k_f, k_h, k_squarebrcl, k_o, k_semicolon, kp_8, kp_7, KC_NO, KC_NO, k_lctrl }, \ + /* 4 */ { k_a, KC_NO, kp_6, k_w, k_lalt, k_d, k_g, k_j, k_backsl, k_squarebrop, k_singlequote, kp_5, kp_4, k_rshift_hidden, kp_plus_hidden, KC_NO }, \ + /* 5 */ { k_z, k_rshift, kp_dot, k_x, KC_NO, k_cm, k_b, k_m, k_return, k_period, k_p, kp_0, kp_1, KC_NO, kp_0_hidden, k_rctrl }, \ + /* 6 */ { k_nubs, KC_NO, kp_3, k_s, k_6_4, k_c, k_v, k_n, k_left, k_l, k_fwslash, kp_2, kp_plus, k_nuhs, kp_enter_hidden, KC_NO }, \ + /* 7 */ { k_tild, KC_NO, kp_minus, k_f2, k_f4, k_8, k_5, k_7, k_f6, k_f8, k_f10, k_f12, k_rmenu, k_space, kp_enter, KC_NO } \ +} + +#define LAYOUT_ansi( \ + k_esc, k_f1, k_f2, k_f3, k_f4, k_f5, k_f6, k_f7, k_f8, k_f9, k_f10, k_f11, k_f12, k_prscr, k_scrl, k_pause, \ + k_tild, k_1, k_2, k_3, k_4, k_5, k_6, k_7, k_8, k_9, k_0, k_minus, k_equals, k_backspace, k_ins, k_home, k_pgup, kp_nl, kp_div, kp_mult, kp_minus, \ + k_tab, k_q, k_w, k_e, k_r, k_t, k_y, k_u, k_i, k_o, k_p, k_squarebrop, k_squarebrcl, k_backsl, k_del, k_end, k_pgdn, kp_7, kp_8, kp_9, kp_plus, \ + k_caps, k_a, k_s, k_d, k_f, k_g, k_h, k_j, k_k, k_l, k_semicolon, k_singlequote, k_return, kp_4, kp_5, kp_6, kp_plus_hidden, \ + k_lshift, k_z, k_x, k_c, k_v, k_b, k_n, k_m, k_cm,k_period, k_fwslash, k_rshift, k_up, kp_1, kp_2, kp_3, kp_enter, \ + k_lctrl, k_lwin, k_lalt, k_space, k_6_4, k_1_d, k_rmenu, k_rctrl, k_left, k_down, k_right, kp_0, kp_dot \ +) \ +{ \ + /* 0 1 2 3 4 5 6 7 8 9 A B C D E F */ \ + /* 0 */ { k_esc, k_pause, k_f3, k_f1, k_ins, k_3, k_4, k_6, k_f5, k_f7, k_f9, k_f11, k_prscr, k_right, k_scrl, KC_NO }, \ + /* 1 */ { k_tab, KC_NO, k_del, k_pgdn, KC_NO, k_e, k_t, k_u, k_backspace, k_minus, k_down, k_end, k_home, k_1_d, KC_NO, k_caps }, \ + /* 2 */ { k_1, KC_NO, kp_nl, k_pgup, KC_NO, k_i, k_r, k_y, k_equals, k_9, k_0, kp_mult, kp_div, k_up, k_lwin, KC_NO }, \ + /* 3 */ { k_q, k_lshift, kp_9, k_2, KC_NO, k_k, k_f, k_h, k_squarebrcl, k_o, k_semicolon, kp_8, kp_7, KC_NO, KC_NO, k_lctrl }, \ + /* 4 */ { k_a, KC_NO, kp_6, k_w, k_lalt, k_d, k_g, k_j, k_backsl, k_squarebrop, k_singlequote, kp_5, kp_4, KC_NO, kp_plus_hidden, KC_NO }, \ + /* 5 */ { k_z, k_rshift, kp_dot, k_x, KC_NO, k_cm, k_b, k_m, k_return, k_period, k_p, kp_0, kp_1, KC_NO, KC_NO, k_rctrl }, \ + /* 6 */ { KC_NO, KC_NO, kp_3, k_s, k_6_4, k_c, k_v, k_n, k_left, k_l, k_fwslash, kp_2, kp_plus, KC_NO, KC_NO, KC_NO }, \ + /* 7 */ { k_tild, KC_NO, kp_minus, k_f2, k_f4, k_8, k_5, k_7, k_f6, k_f8, k_f10, k_f12, k_rmenu, k_space, kp_enter, KC_NO } \ +} + +#define LAYOUT_iso( \ + k_esc, k_f1, k_f2, k_f3, k_f4, k_f5, k_f6, k_f7, k_f8, k_f9, k_f10, k_f11, k_f12, k_prscr, k_scrl, k_pause, \ + k_tild, k_1, k_2, k_3, k_4, k_5, k_6, k_7, k_8, k_9, k_0, k_minus, k_equals, k_backspace, k_ins, k_home, k_pgup, kp_nl, kp_div, kp_mult, kp_minus, \ + k_tab, k_q, k_w, k_e, k_r, k_t, k_y, k_u, k_i, k_o, k_p, k_squarebrop, k_squarebrcl, k_return, k_del, k_end, k_pgdn, kp_7, kp_8, kp_9, kp_plus, \ + k_caps, k_a, k_s, k_d, k_f, k_g, k_h, k_j, k_k, k_l, k_semicolon, k_singlequote, k_nuhs, kp_4, kp_5, kp_6, kp_plus_hidden, \ + k_lshift,k_nubs,k_z, k_x, k_c, k_v, k_b, k_n, k_m, k_cm,k_period, k_fwslash, k_rshift, k_up, kp_1, kp_2, kp_3, kp_enter, \ + k_lctrl, k_lwin, k_lalt, k_space, k_6_4, k_1_d, k_rmenu, k_rctrl, k_left, k_down, k_right, kp_0, kp_dot \ +) \ +{ \ + /* 0 1 2 3 4 5 6 7 8 9 A B C D E F */ \ + /* 0 */ { k_esc, k_pause, k_f3, k_f1, k_ins, k_3, k_4, k_6, k_f5, k_f7, k_f9, k_f11, k_prscr, k_right, k_scrl, KC_NO }, \ + /* 1 */ { k_tab, KC_NO, k_del, k_pgdn, KC_NO, k_e, k_t, k_u, k_backspace, k_minus, k_down, k_end, k_home, k_1_d, KC_NO, k_caps }, \ + /* 2 */ { k_1, KC_NO, kp_nl, k_pgup, KC_NO, k_i, k_r, k_y, k_equals, k_9, k_0, kp_mult, kp_div, k_up, k_lwin, KC_NO }, \ + /* 3 */ { k_q, k_lshift, kp_9, k_2, KC_NO, k_k, k_f, k_h, k_squarebrcl, k_o, k_semicolon, kp_8, kp_7, KC_NO, KC_NO, k_lctrl }, \ + /* 4 */ { k_a, KC_NO, kp_6, k_w, k_lalt, k_d, k_g, k_j, KC_NO, k_squarebrop, k_singlequote, kp_5, kp_4, KC_NO, kp_plus_hidden, KC_NO }, \ + /* 5 */ { k_z, k_rshift, kp_dot, k_x, KC_NO, k_cm, k_b, k_m, k_return, k_period, k_p, kp_0, kp_1, KC_NO, KC_NO, k_rctrl }, \ + /* 6 */ { k_nubs, KC_NO, kp_3, k_s, k_6_4, k_c, k_v, k_n, k_left, k_l, k_fwslash, kp_2, kp_plus, k_nuhs, KC_NO, KC_NO }, \ + /* 7 */ { k_tild, KC_NO, kp_minus, k_f2, k_f4, k_8, k_5, k_7, k_f6, k_f8, k_f10, k_f12, k_rmenu, k_space, kp_enter, KC_NO } \ +} diff --git a/keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/readme.md b/keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/readme.md new file mode 100644 index 0000000000..8cf749ae53 --- /dev/null +++ b/keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/readme.md @@ -0,0 +1,25 @@ +# unicomp/spacesaver_m_pre_2013/overnumpad_1xb + +![unicomp/spacesaver_m_pre_2013/overnumpad_1xb](https://www.pckeyboard.com/mm5/graphics/00000001/UB4ZPHA_800x343.jpg) + +Support Unicomp Spacesaver M keyboards with pre-2013 bottom row. + +* Keyboard Maintainer: [Purdea Andrei](https://github.com/purdeaandrei) +* Hardware Supported: OverNumpad controller v1.Xb +* Hardware Availability: + * [controller](https://github.com/purdeaandrei/overnumpad_controller_1xb) + * [keyboard](https://www.pckeyboard.com/) + +To place the keyboard into bootloader mode in order to flash it, hold the ESC key while plugging the board in. +It's possible to make this feature not work, by flashing the wrong firmware onto the keyboard. +If that happens, open up the keyboard, and press the RST&PROG button to enter bootloader mode. + +Make example for this keyboard (after setting up your build environment): + + make unicomp/spacesaver_m_pre_2013/overnumpad_1xb:default + +Flashing example for this keyboard: + + make unicomp/spacesaver_m_pre_2013/overnumpad_1xb:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/rules.mk b/keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/rules.mk new file mode 100644 index 0000000000..507f4fcd37 --- /dev/null +++ b/keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/rules.mk @@ -0,0 +1,25 @@ +# MCU name +MCU = STM32F446 # STM32F446RET6 + +# Bootloader selection +BOOTLOADER = stm32-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enter bootloader mode when holding the ESC key. +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +ENCODER_ENABLE = no # Enable rotary encoder support +AUDIO_ENABLE = no # Audio output +KEYBOARD_SHARED_EP = yes # Free up some extra endpoints - needed if console+mouse+extra + +HAPTIC_ENABLE += SOLENOID From c8a58691146495e5506a355d6fb6d65edbc78e79 Mon Sep 17 00:00:00 2001 From: qpockets <69164255+qpockets@users.noreply.github.com> Date: Tue, 21 Sep 2021 17:12:55 -0400 Subject: [PATCH 059/595] [Keyboard] add synapse pcb (#14428) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- keyboards/synapse/config.h | 59 +++++++++++++ keyboards/synapse/info.json | 96 +++++++++++++++++++++ keyboards/synapse/keymaps/7u_space/config.h | 27 ++++++ keyboards/synapse/keymaps/7u_space/keymap.c | 77 +++++++++++++++++ keyboards/synapse/keymaps/7u_space/rules.mk | 1 + keyboards/synapse/keymaps/default/config.h | 27 ++++++ keyboards/synapse/keymaps/default/keymap.c | 77 +++++++++++++++++ keyboards/synapse/keymaps/default/rules.mk | 1 + keyboards/synapse/readme.md | 27 ++++++ keyboards/synapse/rules.mk | 22 +++++ keyboards/synapse/synapse.c | 34 ++++++++ keyboards/synapse/synapse.h | 48 +++++++++++ 12 files changed, 496 insertions(+) create mode 100644 keyboards/synapse/config.h create mode 100644 keyboards/synapse/info.json create mode 100644 keyboards/synapse/keymaps/7u_space/config.h create mode 100644 keyboards/synapse/keymaps/7u_space/keymap.c create mode 100644 keyboards/synapse/keymaps/7u_space/rules.mk create mode 100644 keyboards/synapse/keymaps/default/config.h create mode 100644 keyboards/synapse/keymaps/default/keymap.c create mode 100644 keyboards/synapse/keymaps/default/rules.mk create mode 100644 keyboards/synapse/readme.md create mode 100644 keyboards/synapse/rules.mk create mode 100644 keyboards/synapse/synapse.c create mode 100644 keyboards/synapse/synapse.h diff --git a/keyboards/synapse/config.h b/keyboards/synapse/config.h new file mode 100644 index 0000000000..82a0aadea5 --- /dev/null +++ b/keyboards/synapse/config.h @@ -0,0 +1,59 @@ +/* Copyright 2021 qpockets + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x7170 +#define PRODUCT_ID 0x5359 +#define DEVICE_VER 0x0001 +#define MANUFACTURER drmmr +#define PRODUCT synapse + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 + +#define MATRIX_ROW_PINS \ + { E6, B0, F4, F1 } +#define MATRIX_COL_PINS \ + { F0, D4, F5, B1, B2, B3, B7, D0, D1, D2, D3, B6 } + +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* ROTARY ENCODERS */ +#define ENCODERS_PAD_A \ + { D6, C6 } +#define ENCODERS_PAD_B \ + { D7, C7 } + +#define ENCODER_RESOLUTION 4 +#define ENCODER_DIRECTION_FLIP + +#define DEBOUNCE 5 + +#define LOCKING_SUPPORT_ENABLE + +//#define RGB_DI_PIN D5 +//#define RGBLED_NUM 4 + +//#define DRIVER_LED_TOTAL RGBLED_NUM +//#define RGBLIGHT_DEFAULT_HUE 130 diff --git a/keyboards/synapse/info.json b/keyboards/synapse/info.json new file mode 100644 index 0000000000..c7b8611256 --- /dev/null +++ b/keyboards/synapse/info.json @@ -0,0 +1,96 @@ +{ + "keyboard_name": "synapse", + "url": "", + "maintainer": "qpockets", + "layouts": { + "LAYOUT_default": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":0, "y":1, "w":1.25}, + {"x":1.25, "y":1}, + {"x":2.25, "y":1}, + {"x":3.25, "y":1}, + {"x":4.25, "y":1}, + {"x":5.25, "y":1}, + {"x":6.25, "y":1}, + {"x":7.25, "y":1}, + {"x":8.25, "y":1}, + {"x":9.25, "y":1}, + {"x":10.25, "y":1, "w":1.75}, + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2, "w":1.25}, + {"x":0, "y":3}, + {"x":1, "y":3}, + {"x":2, "y":3}, + {"x":3, "y":3, "w":3}, + {"x":6, "y":3, "w":3}, + {"x":9, "y":3}, + {"x":10, "y":3}, + {"x":11, "y":3} + ] + }, + "LAYOUT_7u_space": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":0, "y":1, "w":1.25}, + {"x":1.25, "y":1}, + {"x":2.25, "y":1}, + {"x":3.25, "y":1}, + {"x":4.25, "y":1}, + {"x":5.25, "y":1}, + {"x":6.25, "y":1}, + {"x":7.25, "y":1}, + {"x":8.25, "y":1}, + {"x":9.25, "y":1}, + {"x":10.25, "y":1, "w":1.75}, + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2, "w":1.25}, + {"x":0, "y":3}, + {"x":1, "y":3, "w":1.5}, + {"x":2.5, "y":3, "w":7}, + {"x":9.5, "y":3, "w":1.5}, + {"x":11, "y":3} + ] + } + } +} diff --git a/keyboards/synapse/keymaps/7u_space/config.h b/keyboards/synapse/keymaps/7u_space/config.h new file mode 100644 index 0000000000..0b0e89fa1f --- /dev/null +++ b/keyboards/synapse/keymaps/7u_space/config.h @@ -0,0 +1,27 @@ +/* Copyright 2021 qpockets + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +/*Modtaps*/ +#define TAPPING_TERM 165 +#define IGNORE_MOD_TAP_INTERRUPT + +/*Combos*/ +#ifdef COMBO_ENABLE +# define COMBO_COUNT 5 +# define COMBO_TERM 50 +#endif \ No newline at end of file diff --git a/keyboards/synapse/keymaps/7u_space/keymap.c b/keyboards/synapse/keymaps/7u_space/keymap.c new file mode 100644 index 0000000000..00ec4b30c1 --- /dev/null +++ b/keyboards/synapse/keymaps/7u_space/keymap.c @@ -0,0 +1,77 @@ +/* Copyright 2021 qpockets + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +enum layers{ + _BASE, + _SYM, + _NAV +}; + +enum combo_events { + COMBO_BSPC, + COMBO_ENT, + COMBO_TAB, + COMBO_ESC, + COMBO_DEL +}; +#define KC_DN_CTL LT(_NAV, KC_LCTL) +#define KC_UP_SPC LT(_SYM, KC_SPC) +#define KC_SF LSFT_T(KC_F) +#define KC_SJ RSFT_T(KC_J) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_7u_space( + KC_DEL, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + KC_TAB, KC_A, KC_S, KC_D, KC_SF, KC_G, KC_H, KC_SJ, KC_K, KC_L, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, + KC_LGUI, KC_DN_CTL, KC_UP_SPC, KC_RALT, KC_RGUI + ), + + [_SYM] = LAYOUT_7u_space( + KC_TRNS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS, + KC_GRV, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_EQUAL, KC_MINS, + KC_TRNS, KC_PIPE, KC_BSLS, KC_LPRN, KC_LBRC, KC_SCLN, KC_COLN, KC_RBRC, KC_RPRN, KC_PLUS, KC_UNDS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + [_NAV] = LAYOUT_7u_space( + RESET, KC_TRNS, KC_HOME, KC_UP, KC_END, KC_PGUP, KC_F1, KC_F2, KC_F3, KC_F4, KC_BSPC, KC_TRNS, + KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_PGDN, KC_F4, KC_F5, KC_F6, KC_F7, KC_TAB, + KC_LCAP, KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_TRNS, KC_F9, KC_F10, KC_F11, KC_F12, KC_ENT, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), +}; + + + + +#ifdef COMBO_ENABLE +const uint16_t PROGMEM combo_bspc[] = {KC_O, KC_P, COMBO_END}; +const uint16_t PROGMEM combo_ent[] = {KC_K, KC_L, COMBO_END}; +const uint16_t PROGMEM combo_tab[] = {KC_S, KC_D, COMBO_END}; +const uint16_t PROGMEM combo_esc[] = {KC_T, KC_Y, COMBO_END}; +const uint16_t PROGMEM combo_del[] = {KC_Q, KC_W, COMBO_END}; + +combo_t key_combos[COMBO_COUNT] = { + [COMBO_BSPC] = COMBO(combo_bspc,KC_BSPC), + [COMBO_ENT] = COMBO(combo_ent,KC_ENT), + [COMBO_TAB] = COMBO(combo_tab,KC_TAB), + [COMBO_ESC] = COMBO(combo_esc,KC_ESC), + [COMBO_DEL] = COMBO(combo_del,KC_DEL) +}; +#endif diff --git a/keyboards/synapse/keymaps/7u_space/rules.mk b/keyboards/synapse/keymaps/7u_space/rules.mk new file mode 100644 index 0000000000..ab1e438182 --- /dev/null +++ b/keyboards/synapse/keymaps/7u_space/rules.mk @@ -0,0 +1 @@ +COMBO_ENABLE = yes diff --git a/keyboards/synapse/keymaps/default/config.h b/keyboards/synapse/keymaps/default/config.h new file mode 100644 index 0000000000..0b0e89fa1f --- /dev/null +++ b/keyboards/synapse/keymaps/default/config.h @@ -0,0 +1,27 @@ +/* Copyright 2021 qpockets + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +/*Modtaps*/ +#define TAPPING_TERM 165 +#define IGNORE_MOD_TAP_INTERRUPT + +/*Combos*/ +#ifdef COMBO_ENABLE +# define COMBO_COUNT 5 +# define COMBO_TERM 50 +#endif \ No newline at end of file diff --git a/keyboards/synapse/keymaps/default/keymap.c b/keyboards/synapse/keymaps/default/keymap.c new file mode 100644 index 0000000000..85ca4c628e --- /dev/null +++ b/keyboards/synapse/keymaps/default/keymap.c @@ -0,0 +1,77 @@ +/* Copyright 2021 qpockets + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +enum layers{ + _BASE, + _SYM, + _NAV +}; + +enum combo_events { + COMBO_BSPC, + COMBO_ENT, + COMBO_TAB, + COMBO_ESC, + COMBO_DEL +}; +#define KC_DN_BSPC LT(_NAV, KC_BSPC) +#define KC_UP_SPC LT(_SYM, KC_SPC) +#define KC_SF LSFT_T(KC_F) +#define KC_SJ RSFT_T(KC_J) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_default( + KC_DEL, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + KC_TAB, KC_A, KC_S, KC_D, KC_SF, KC_G, KC_H, KC_SJ, KC_K, KC_L, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, + KC_LALT, KC_LGUI, KC_LCTL, KC_DN_BSPC, KC_UP_SPC, KC_RALT, KC_RGUI, KC_RCTL + ), + + [_SYM] = LAYOUT_default( + KC_TRNS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS, + KC_GRV, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_EQUAL, KC_MINS, + KC_TRNS, KC_PIPE, KC_BSLS, KC_LPRN, KC_LBRC, KC_SCLN, KC_COLN, KC_RBRC, KC_RPRN, KC_PLUS, KC_UNDS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + [_NAV] = LAYOUT_default( + RESET, KC_TRNS, KC_HOME, KC_UP, KC_END, KC_PGUP, KC_F1, KC_F2, KC_F3, KC_F4, KC_BSPC, KC_TRNS, + KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_PGDN, KC_F4, KC_F5, KC_F6, KC_F7, KC_TAB, + KC_LCAP, KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_TRNS, KC_F9, KC_F10, KC_F11, KC_F12, KC_ENT, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), +}; + + + + +#ifdef COMBO_ENABLE +const uint16_t PROGMEM combo_bspc[] = {KC_O, KC_P, COMBO_END}; +const uint16_t PROGMEM combo_ent[] = {KC_K, KC_L, COMBO_END}; +const uint16_t PROGMEM combo_tab[] = {KC_S, KC_D, COMBO_END}; +const uint16_t PROGMEM combo_esc[] = {KC_T, KC_Y, COMBO_END}; +const uint16_t PROGMEM combo_del[] = {KC_Q, KC_W, COMBO_END}; + +combo_t key_combos[COMBO_COUNT] = { + [COMBO_BSPC] = COMBO(combo_bspc,KC_BSPC), + [COMBO_ENT] = COMBO(combo_ent,KC_ENT), + [COMBO_TAB] = COMBO(combo_tab,KC_TAB), + [COMBO_ESC] = COMBO(combo_esc,KC_ESC), + [COMBO_DEL] = COMBO(combo_del,KC_DEL) +}; +#endif diff --git a/keyboards/synapse/keymaps/default/rules.mk b/keyboards/synapse/keymaps/default/rules.mk new file mode 100644 index 0000000000..ab1e438182 --- /dev/null +++ b/keyboards/synapse/keymaps/default/rules.mk @@ -0,0 +1 @@ +COMBO_ENABLE = yes diff --git a/keyboards/synapse/readme.md b/keyboards/synapse/readme.md new file mode 100644 index 0000000000..1e4642881f --- /dev/null +++ b/keyboards/synapse/readme.md @@ -0,0 +1,27 @@ +# synapse + +![synapse](https://i.imgur.com/OQNNPBhh.jpg) + +Stagger PCB for Cervello! + +* Keyboard Maintainer: https://github.com/qpockets +* Hardware Availability: [P3D Store](https://p3dstore.com/products/cervello-acrylic-keyboard-case-and-pcb-group-buy?_pos=4&_sid=fd078da46&_ss=r&variant=40398412677304) Group Buy + +Make example for this keyboard (after setting up your build environment): + + make synapse:default + +Flashing example for this keyboard: + + make synapse:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* diff --git a/keyboards/synapse/rules.mk b/keyboards/synapse/rules.mk new file mode 100644 index 0000000000..c1ecc763c5 --- /dev/null +++ b/keyboards/synapse/rules.mk @@ -0,0 +1,22 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +ENCODER_ENABLE = yes diff --git a/keyboards/synapse/synapse.c b/keyboards/synapse/synapse.c new file mode 100644 index 0000000000..ac9c50ceb1 --- /dev/null +++ b/keyboards/synapse/synapse.c @@ -0,0 +1,34 @@ +/* Copyright 2021 qpockets + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "synapse.h" + +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + if (index == 1) { /* left encoder*/ + if (clockwise){ + tap_code(KC_WH_U); + } else { + tap_code(KC_WH_D); + } + } else if (index == 0) { /* right encoder */ + if (clockwise){ + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } + return true; +} diff --git a/keyboards/synapse/synapse.h b/keyboards/synapse/synapse.h new file mode 100644 index 0000000000..a126e450ec --- /dev/null +++ b/keyboards/synapse/synapse.h @@ -0,0 +1,48 @@ +/* Copyright 2021 qpockets + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +#define XXX KC_NO + +#define LAYOUT_default( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K50, K60, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K51, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K52, \ + K30, K31, K32, K33, K36, K38, K39, K53 \ +) \ +{ \ + {K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K50, K60}, \ + {K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K51, XXX}, \ + {K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K52, XXX}, \ + {K30, K31, K32, K33, XXX, XXX, K36, XXX, K38, K39, K53, XXX} \ +} \ + +#define LAYOUT_7u_space( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K50, K60, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K51, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K52, \ + K30, K31, K33, K39, K53 \ +) \ +{ \ + {K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K50, K60}, \ + {K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K51, XXX}, \ + {K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K52, XXX}, \ + {K30, K31, XXX, K33, XXX, XXX, XXX, XXX, XXX, K39, K53, XXX} \ +} + From cebc5688a09ce0fb9a6163dcea9155041ba89d5c Mon Sep 17 00:00:00 2001 From: 3araht <69518343+3araht@users.noreply.github.com> Date: Wed, 22 Sep 2021 06:13:36 +0900 Subject: [PATCH 060/595] [Keyboard] add bandominedoni keyboard (#13116) --- keyboards/bandominedoni/bandominedoni.c | 151 ++++++++ keyboards/bandominedoni/bandominedoni.h | 84 ++++ keyboards/bandominedoni/config.h | 365 ++++++++++++++++++ keyboards/bandominedoni/info.json | 102 +++++ .../bandominedoni/keymaps/default/keymap.c | 84 ++++ .../bandominedoni/keymaps/default/readme.md | 1 + keyboards/bandominedoni/keymaps/led/keymap.c | 221 +++++++++++ keyboards/bandominedoni/keymaps/led/readme.md | 1 + keyboards/bandominedoni/keymaps/led/rules.mk | 2 + keyboards/bandominedoni/keymaps/via/config.h | 18 + keyboards/bandominedoni/keymaps/via/keymap.c | 150 +++++++ keyboards/bandominedoni/keymaps/via/readme.md | 1 + keyboards/bandominedoni/keymaps/via/rules.mk | 3 + keyboards/bandominedoni/readme.md | 22 ++ keyboards/bandominedoni/rgb_matrix_user.inc | 16 + keyboards/bandominedoni/rules.mk | 28 ++ 16 files changed, 1249 insertions(+) create mode 100644 keyboards/bandominedoni/bandominedoni.c create mode 100644 keyboards/bandominedoni/bandominedoni.h create mode 100644 keyboards/bandominedoni/config.h create mode 100644 keyboards/bandominedoni/info.json create mode 100644 keyboards/bandominedoni/keymaps/default/keymap.c create mode 100644 keyboards/bandominedoni/keymaps/default/readme.md create mode 100644 keyboards/bandominedoni/keymaps/led/keymap.c create mode 100644 keyboards/bandominedoni/keymaps/led/readme.md create mode 100644 keyboards/bandominedoni/keymaps/led/rules.mk create mode 100644 keyboards/bandominedoni/keymaps/via/config.h create mode 100644 keyboards/bandominedoni/keymaps/via/keymap.c create mode 100644 keyboards/bandominedoni/keymaps/via/readme.md create mode 100644 keyboards/bandominedoni/keymaps/via/rules.mk create mode 100644 keyboards/bandominedoni/readme.md create mode 100644 keyboards/bandominedoni/rgb_matrix_user.inc create mode 100644 keyboards/bandominedoni/rules.mk diff --git a/keyboards/bandominedoni/bandominedoni.c b/keyboards/bandominedoni/bandominedoni.c new file mode 100644 index 0000000000..1b0365ac6a --- /dev/null +++ b/keyboards/bandominedoni/bandominedoni.c @@ -0,0 +1,151 @@ +/* Copyright 2021 3araht + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "bandominedoni.h" + +#ifdef RGB_MATRIX_ENABLE + +led_config_t g_led_config = { + { + { 75, 46, 45, 44, 43, 42, NO_LED }, \ + { 47, 48, 49, 50, 51, 52, 53 }, \ + { 60, 59, 58, 57, 56, 55, 54 }, \ + { 61, 62, 63, 64, 65, 66, 67 }, \ + { 74, 73, 72, 71, 70, 69, 68 }, \ + { NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED, NO_LED }, \ + { 7, 6, 4, 3, 2, 1, 5}, \ + { 8, 9, 10, 11, 12, 13, 0 }, \ + { 19, 18, 17, 16, 15, 14, 41 }, \ + { 20, 21, 22, 23, 24, 25, 40 }, \ + { 30, 29, 28, 27, 26, 39, 38 }, \ + { 31, 32, 33, 34, 35, 36, 37 } + }, { + { 145, 6 }, { 157, 5 }, { 153, 14 }, { 149, 22 }, { 145, 32 }, { 136, 35 }, { 139, 48 }, { 134, 61 }, + { 142, 60 }, { 148, 43 }, { 154, 29 }, { 158, 20 }, { 163, 12 }, { 168, 4 }, + { 178, 5 }, { 173, 12 }, { 168, 20 }, { 163, 28 }, { 157, 40 }, { 151, 55 }, + { 160, 52 }, { 166, 39 }, { 172, 28 }, { 177, 20 }, { 182, 13 }, { 188, 7 }, + { 192, 17 }, { 186, 23 }, { 181, 30 }, { 175, 39 }, { 169, 50 }, + { 178, 51 }, { 184, 41 }, { 190, 33 }, { 196, 27 }, + { 199, 37 }, { 193, 45 }, { 187, 53 }, + { 196, 56 }, { 202, 49 }, + { 205, 61 }, + { 202, 4 }, + { 84, 18 }, { 73, 13 }, { 62, 10 }, { 51, 8 }, { 39, 11 }, { 24, 22 }, + { 34, 19 }, { 45, 16 }, { 56, 16 }, { 66, 18 }, { 77, 22 }, { 87, 28 }, + { 92, 40 }, { 81, 32 }, { 71, 27 }, { 61, 24 }, { 51, 24 }, { 41, 24 }, { 30, 28 }, + { 24, 42 }, { 34, 37 }, { 44, 35 }, { 54, 34 }, { 64, 36 }, { 74, 38 }, { 84, 44 }, + { 87, 54 }, { 77, 49 }, { 67, 47 }, { 57, 45 }, { 47, 45 }, { 37, 48 }, { 27, 52 }, { 19, 56 }, + }, { + 4, 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, + 4, 4, 4, 4, + 4, 4, 4, + 4, 4, + 4, + 4, + 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, 4, 4 + } +}; +#endif + +#if defined(SPLIT_HAND_MATRIX_GRID) +static uint8_t peek_matrix_intersection(pin_t out_pin, pin_t in_pin) { + setPinInputHigh(in_pin); + setPinOutput(out_pin); + writePinLow(out_pin); + // It's almost unnecessary, but wait until it's down to low, just in case. + wait_us(1); + uint8_t pin_state = readPin(in_pin); + // Set out_pin to a setting that is less susceptible to noise. + setPinInputHigh(out_pin); + matrix_io_delay(); // Wait for the pull-up to go HIGH. + return pin_state; +} +#endif + +// Overriding is_keyboard_left() in qmk_firmware/quantum/split_common/split_util.c to limit the handedness check only once. +// reason: bandoMIneDonI has no space on right hand side to use "SPLIT_HAND_MATRIX_GRID". +// However, It enables to decide the handedness by the HW by adding one condition: "not to press any keys (especially r30) dusing startup." +bool is_keyboard_left(void) { +static enum { UNKNOWN, LEFT, RIGHT } hand_side = UNKNOWN; + + // only check once, as this is called often + if (hand_side == UNKNOWN) { +#if defined(SPLIT_HAND_PIN) + // Test pin SPLIT_HAND_PIN for High/Low, if low it's right hand + setPinInput(SPLIT_HAND_PIN); + hand_side = readPin(SPLIT_HAND_PIN) ? LEFT : RIGHT; + return (hand_side == LEFT); +#elif defined(SPLIT_HAND_MATRIX_GRID) +# ifdef SPLIT_HAND_MATRIX_GRID_LOW_IS_RIGHT + hand_side = peek_matrix_intersection(SPLIT_HAND_MATRIX_GRID) ? LEFT : RIGHT; + return (hand_side == LEFT); +# else + hand_side = peek_matrix_intersection(SPLIT_HAND_MATRIX_GRID) ? RIGHT : LEFT; + return (hand_side == LEFT); +# endif +#elif defined(EE_HANDS) + hand_side = eeconfig_read_handedness() ? LEFT : RIGHT; + return (hand_side == LEFT); +#elif defined(MASTER_RIGHT) + hand_side = !is_keyboard_master() ? LEFT : RIGHT; + return (hand_side == LEFT); +#endif + hand_side = is_keyboard_master() ? LEFT : RIGHT; + return (hand_side == LEFT); + } else { + return (hand_side == LEFT); + } +} + +#ifdef ENCODER_ENABLE +const uint16_t rt_matrix[2][2] = { + {5, 5}, {5, 6} +}; + +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (index == 1) { /* An encoder on the right side */ + keypos_t key; + int cw = 0; + cw = clockwise ? 1 : 0; + key.row = rt_matrix[cw][0]; + key.col = rt_matrix[cw][1]; + uint8_t layer = layer_switch_get_layer(key); + uint16_t keycode = keymap_key_to_keycode(layer, key); + keyrecord_t record; + record.event.key = key; + + if (keycode < MI_ON){ + tap_code16(keycode); + } else { + record.event.pressed = true; + process_midi(keycode, &record); + wait_ms(TAP_CODE_DELAY); + record.event.pressed = false; + process_midi(keycode, &record); + } + + } + return true; +} +#endif // ENCODER_ENABLE diff --git a/keyboards/bandominedoni/bandominedoni.h b/keyboards/bandominedoni/bandominedoni.h new file mode 100644 index 0000000000..8e2470826c --- /dev/null +++ b/keyboards/bandominedoni/bandominedoni.h @@ -0,0 +1,84 @@ +/* Copyright 2021 3araht + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ + +// oc: for Open Close selection pedal +// fn: function layer + +#define LAYOUT( \ + l00, l01, l02, l03, l04, \ + l10, l11, l12, l13, l14, l15, l16, \ + l20, l21, l22, l23, l24, l25, l26, \ + l30, l31, l32, l33, l34, l35, l36, \ + l40, l41, l42, l43, l44, l45, l46, l47, \ + \ + oc, r00, r01, r02, r03, fn, \ + r10, r11, r12, r13, r14, ccw, cw,\ + r20, r21, r22, r23, r24, r25, \ + r30, r31, r32, r33, r34, r35, r36, r37, \ + r40, r41, r42, r43, r44, r45, r46, r47, \ + r50, r51, r52, r53, r54, r55, r56, r57, r58 \ +) { \ + { l40, l00, l01, l02, l03, l04, KC_NO }, \ + { l10, l11, l12, l13, l14, l15, l16 }, \ + { l20, l21, l22, l23, l24, l25, l26 }, \ + { l30, l31, l32, l33, l34, l35, l36 }, \ + { l41, l42, l43, l44, l45, l46, l47 }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, ccw, cw }, \ + { r50, r40, r31, r20, r10, r00, r30 }, \ + { r51, r41, r32, r21, r11, r01, oc }, \ + { r52, r42, r33, r22, r12, r02, fn }, \ + { r53, r43, r34, r23, r13, r03, r58 }, \ + { r54, r44, r35, r24, r14, r47, r57 }, \ + { r55, r45, r36, r25, r37, r46, r56 } \ +} + +// Uncomment below if a pedal used for Open/Close is normally-on type (such as Yamaha's.) +// #define PEDAL_NORMALLY_CLOSED + +#ifdef PEDAL_NORMALLY_CLOSED +# define MO_SWAP MO(_OPEN) +# define DF_SWAP DF(_CLOSE) +# define TG_SWAP TG(_OPEN) +#else +# define MO_SWAP MO(_CLOSE) +# define DF_SWAP DF(_OPEN) +# define TG_SWAP TG(_CLOSE) +#endif + +// Long press: go to _FN layer, tap: MUTE +#define FN_MUTE LT(_FN, KC_MUTE) +#define DF_QWER DF(_QWERTY) +#define MIS_EIS LT(_MISC,KC_LANG2) +#define MIS_KAN LT(_MISC,KC_LANG1) + + +// Overriding is_keyboard_left() in qmk_firmware/quantum/split_common/split_util.c to limit the handedness check only once. +// reason: bandoMIneDonI has no space on right hand side to use "SPLIT_HAND_MATRIX_GRID". +// However, It enables to decide the handedness by the HW by adding one condition: "not to press any keys (especially r30) dusing startup." +bool is_keyboard_left(void); diff --git a/keyboards/bandominedoni/config.h b/keyboards/bandominedoni/config.h new file mode 100644 index 0000000000..ee0de340a4 --- /dev/null +++ b/keyboards/bandominedoni/config.h @@ -0,0 +1,365 @@ +/* Copyright 2021 3araht + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0xF4B5 +#define DEVICE_VER 0x0001 +#define MANUFACTURER 3araht +#define PRODUCT bandominedoni + +/* key matrix size */ +#define MATRIX_ROWS 12 +#define MATRIX_COLS 7 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { B5, B4, D7, F6, C6, D4 } +#define MATRIX_COL_PINS { D1, E6, F7, B1, B3, B2, D0 } +#define UNUSED_PINS + +#define MASTER_RIGHT +#ifndef MASTER_RIGHT +// SPLIT_HAND_MATRIX_GRID was initially designed to use with left hand side diode D35 mounted and not pressing K7 on the right hand side during boot. However when a USB cable is reconnected immediately, it fails. Decided to use "MASTER_RIGHT" to make it more reliable. +# define SPLIT_HAND_MATRIX_GRID B5, D0 +#endif + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +#define SOFT_SERIAL_PIN D2 // or D1, D2, D3, E6 + +//#define LED_NUM_LOCK_PIN B0 +//#define LED_CAPS_LOCK_PIN B1 +//#define LED_SCROLL_LOCK_PIN B2 +//#define LED_COMPOSE_PIN B3 +//#define LED_KANA_PIN B4 + +//#define BACKLIGHT_PIN B7 +//#define BACKLIGHT_LEVELS 3 +//#define BACKLIGHT_BREATHING + +#define RGB_DI_PIN D3 +//#ifdef RGB_DI_PIN +//# define RGBLED_NUM 16 +//# define RGBLIGHT_HUE_STEP 8 +//# define RGBLIGHT_SAT_STEP 8 +//# define RGBLIGHT_VAL_STEP 8 +//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ +//# define RGBLIGHT_ANIMATIONS +/*== or choose animations ==*/ +//# define RGBLIGHT_EFFECT_BREATHING +//# define RGBLIGHT_EFFECT_RAINBOW_MOOD +//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL +//# define RGBLIGHT_EFFECT_SNAKE +//# define RGBLIGHT_EFFECT_KNIGHT +//# define RGBLIGHT_EFFECT_CHRISTMAS +//# define RGBLIGHT_EFFECT_STATIC_GRADIENT +//# define RGBLIGHT_EFFECT_RGB_TEST +//# define RGBLIGHT_EFFECT_ALTERNATING +/*== customize breathing effect ==*/ +/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +/*==== use exp() and sin() ====*/ +//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +//#endif + +#ifdef RGB_MATRIX_ENABLE + +/* ws2812 RGB MATRIX */ +# define DRIVER_LED_TOTAL 76 + + // reacts to keypresses +# define RGB_MATRIX_KEYPRESSES + +// for all fingers used at once. +# define LED_HITS_TO_REMEMBER 10 + +# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 50 +# define RGB_MATRIX_STARTUP_SPD 127 +// the above brighness setting has no effect on rgb_matrix_set_color(). +// Use darker colors instead. +/* RGB darker COLORS */ +# define RGB_DARKWHITE 0x33, 0x33, 0x33 +# define RGB_DARKRED 0x33, 0x0, 0x0 +# define RGB_DARKCORAL 0x33, 0x18, 0xF +# define RGB_DARKORANGE 0x33, 0x19, 0x0 +# define RGB_DARKGOLDENROD 0x2B, 0x21, 0x6 +# define RGB_DARKGOLD 0x33, 0x2B, 0x0 +# define RGB_DARKYELLOW 0x33, 0x33, 0x0 +# define RGB_DARKCHARTREUSE 0x19, 0x33, 0x0 +# define RGB_DARKGREEN 0x0, 0x33, 0x0 +# define RGB_DARKSPRINGGREEN 0x0, 0x33, 0x19 +# define RGB_DARKTURQUOISE 0xE, 0x16, 0x15 +# define RGB_DARKTEAL 0x0, 0x19, 0x19 +# define RGB_DARKCYAN 0x0, 0x33, 0x33 +# define RGB_DARKAZURE 0x1E, 0x31, 0x33 +# define RGB_DARKBLUE 0x0, 0x0, 0x33 +# define RGB_DARKPURPLE 0x18, 0x0, 0x33 +# define RGB_DARKMAGENTA 0x33, 0x0, 0x33 +# define RGB_DARKPINK 0x33, 0x19, 0x26 + +// https://docs.qmk.fm/#/feature_rgb_matrix +// Enable suspend mode. +# define RGB_DISABLE_WHEN_USB_SUSPENDED true + +// // enable below to shrink the firmware size ( -1974 bytes ) +// # define REDUCE_RGB_MATRIX_EFFECTS + +// enable below to shrink the firmware size ( -1574 bytes ) +// # define REDUCE_RGB_MATRIX_EFFECTS_2 + +// # ifdef AUDIO_ENABLE +# ifdef CONSOLE_ENABLE +// # define DISABLE_RGB_MATRIX_SOLID_COLOR +# define DISABLE_RGB_MATRIX_ALPHAS_MODS +# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define DISABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define DISABLE_RGB_MATRIX_BREATHING +# define DISABLE_RGB_MATRIX_BAND_SAT +# define DISABLE_RGB_MATRIX_BAND_VAL +# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define DISABLE_RGB_MATRIX_CYCLE_ALL +# define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define DISABLE_RGB_MATRIX_CYCLE_OUT_IN +# define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define DISABLE_RGB_MATRIX_DUAL_BEACON +# define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define DISABLE_RGB_MATRIX_CYCLE_SPIRAL +# define DISABLE_RGB_MATRIX_RAINBOW_BEACON +# define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define DISABLE_RGB_MATRIX_RAINDROPS +# define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define DISABLE_RGB_MATRIX_HUE_BREATHING +# define DISABLE_RGB_MATRIX_HUE_PENDULUM +# define DISABLE_RGB_MATRIX_HUE_WAVE +# define DISABLE_RGB_MATRIX_TYPING_HEATMAP +# define DISABLE_RGB_MATRIX_DIGITAL_RAIN +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define DISABLE_RGB_MATRIX_SPLASH +# define DISABLE_RGB_MATRIX_MULTISPLASH +# define DISABLE_RGB_MATRIX_SOLID_SPLASH +# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +# else +# define DISABLE_RGB_MATRIX_SOLID_COLOR +# define DISABLE_RGB_MATRIX_ALPHAS_MODS +# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define DISABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define DISABLE_RGB_MATRIX_BREATHING +# define DISABLE_RGB_MATRIX_BAND_SAT +# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS + +// RAINDROPS don't match well with layer LED indicator (oc) using rgb_matrix_set_color(). +# define DISABLE_RGB_MATRIX_RAINDROPS +# define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +// Recommendend not to use then. + +# if defined(REDUCE_RGB_MATRIX_EFFECTS) || defined(VIA_ENABLE) +// # ifdef REDUCE_RGB_MATRIX_EFFECTS +# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define DISABLE_RGB_MATRIX_CYCLE_OUT_IN +# define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define DISABLE_RGB_MATRIX_DUAL_BEACON +# define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define DISABLE_RGB_MATRIX_CYCLE_SPIRAL +# endif + +# define DISABLE_RGB_MATRIX_HUE_BREATHING +# define DISABLE_RGB_MATRIX_HUE_PENDULUM +# define DISABLE_RGB_MATRIX_HUE_WAVE +# define DISABLE_RGB_MATRIX_TYPING_HEATMAP +# define DISABLE_RGB_MATRIX_DIGITAL_RAIN +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS + +# if defined(REDUCE_RGB_MATRIX_EFFECTS_2) || defined(VIA_ENABLE) +// # ifdef REDUCE_RGB_MATRIX_EFFECTS_2 +# define DISABLE_RGB_MATRIX_BAND_VAL +# define DISABLE_RGB_MATRIX_CYCLE_ALL +# define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define DISABLE_RGB_MATRIX_RAINBOW_BEACON +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define DISABLE_RGB_MATRIX_MULTISPLASH +# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +# endif +// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE +# define DISABLE_RGB_MATRIX_SPLASH +# define DISABLE_RGB_MATRIX_SOLID_SPLASH +# endif // AUDIO_ENABLE + +// #define DISABLE_RGB_MATRIX_SOLID_COLOR +// #define DISABLE_RGB_MATRIX_ALPHAS_MODS +// #define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN +// #define DISABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +// #define DISABLE_RGB_MATRIX_BREATHING +// #define DISABLE_RGB_MATRIX_BAND_SAT // white background ver. of _BAND_VAL +// #define DISABLE_RGB_MATRIX_BAND_VAL +// #define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +// #define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +// #define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT +// #define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL +// #define DISABLE_RGB_MATRIX_CYCLE_ALL +// #define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +// #define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN +// #define DISABLE_RGB_MATRIX_CYCLE_OUT_IN +// #define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +// #define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +// #define DISABLE_RGB_MATRIX_DUAL_BEACON +// #define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL +// #define DISABLE_RGB_MATRIX_CYCLE_SPIRAL +// #define DISABLE_RGB_MATRIX_RAINBOW_BEACON +// #define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS +// #define DISABLE_RGB_MATRIX_RAINDROPS +// #define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS //White ver of above. +// #define DISABLE_RGB_MATRIX_HUE_BREATHING +// #define DISABLE_RGB_MATRIX_HUE_PENDULUM +// #define DISABLE_RGB_MATRIX_HUE_WAVE +// #define DISABLE_RGB_MATRIX_TYPING_HEATMAP +// #define DISABLE_RGB_MATRIX_DIGITAL_RAIN +// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE +// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// #define DISABLE_RGB_MATRIX_SPLASH +// #define DISABLE_RGB_MATRIX_MULTISPLASH +// #define DISABLE_RGB_MATRIX_SOLID_SPLASH +// #define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +#endif // RGB_MATRIX_ENABLE + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +// #define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +// #define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER + +/* 2021/01/22 added to shrink firmware size */ +// NO_ACTION_TAPPING -1964 bytes, however, this disables Layer mods... +// #define NO_ACTION_TAPPING +// NO_ACTION_ONESHOT -388 bytes +#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 + +#ifdef MIDI_ENABLE +# define MIDI_ADVANCED +// Initial velocity value (avoid using 127 since it is used as a special number in some sound sources.) +# define MIDI_INITIAL_VELOCITY 117 +#endif // MIDI_ENABLE + +/* + * Encoder options + */ +#ifdef ENCODER_ENABLE +# define ENCODERS_PAD_A { C7 } // dummy +# define ENCODERS_PAD_B { B7 } // dummy +# define ENCODERS_PAD_A_RIGHT { F5 } +# define ENCODERS_PAD_B_RIGHT { F4 } +# define ENCODER_RESOLUTION 4 +# define TAP_CODE_DELAY 10 +#endif // ENCODER_ENABLE diff --git a/keyboards/bandominedoni/info.json b/keyboards/bandominedoni/info.json new file mode 100644 index 0000000000..82fcc559c9 --- /dev/null +++ b/keyboards/bandominedoni/info.json @@ -0,0 +1,102 @@ +{ + "keyboard_name": "bandominedoni", + "url": "https://github.com/3araht", + "maintainer": "3araht", + "layouts": { + "LAYOUT": { + "layout": [ + {"label": "l00", "x": 2, "y": 0.5}, + {"label": "l01", "x": 3, "y": 0.5}, + {"label": "l02", "x": 4, "y": 0.5}, + {"label": "l03", "x": 5, "y": 0.5}, + {"label": "l04", "x": 6, "y": 0.5}, + + {"label": "l10", "x": 0.5, "y": 1.5}, + {"label": "l11", "x": 1.5, "y": 1.5}, + {"label": "l12", "x": 2.5, "y": 1.5}, + {"label": "l13", "x": 3.5, "y": 1.5}, + {"label": "l14", "x": 4.5, "y": 1.5}, + {"label": "l15", "x": 5.5, "y": 1.5}, + {"label": "l16", "x": 6.5, "y": 1.5}, + + {"label": "l20", "x": 1, "y": 2.5}, + {"label": "l21", "x": 2, "y": 2.5}, + {"label": "l22", "x": 3, "y": 2.5}, + {"label": "l23", "x": 4, "y": 2.5}, + {"label": "l24", "x": 5, "y": 2.5}, + {"label": "l25", "x": 6, "y": 2.5}, + {"label": "l26", "x": 7, "y": 2.5}, + + {"label": "l30", "x": 0.5, "y": 3.5}, + {"label": "l31", "x": 1.5, "y": 3.5}, + {"label": "l32", "x": 2.5, "y": 3.5}, + {"label": "l33", "x": 3.5, "y": 3.5}, + {"label": "l34", "x": 4.5, "y": 3.5}, + {"label": "l35", "x": 5.5, "y": 3.5}, + {"label": "l36", "x": 6.5, "y": 3.5}, + + {"label": "l40", "x": 0, "y": 4.5}, + {"label": "l41", "x": 1, "y": 4.5}, + {"label": "l42", "x": 2, "y": 4.5}, + {"label": "l43", "x": 3, "y": 4.5}, + {"label": "l44", "x": 4, "y": 4.5}, + {"label": "l45", "x": 5, "y": 4.5}, + {"label": "l46", "x": 6, "y": 4.5}, + {"label": "l47", "x": 7, "y": 4.5}, + + {"label": "oc", "x": 9, "y": 0}, + + {"label": "r00", "x": 11.5, "y": 0}, + {"label": "r01", "x": 12.5, "y": 0}, + {"label": "r02", "x": 13.5, "y": 0}, + {"label": "r03", "x": 14.5, "y": 0}, + + {"label": "fn", "x": 17, "y": 0}, + + {"label": "r10", "x": 11, "y": 1}, + {"label": "r11", "x": 12, "y": 1}, + {"label": "r12", "x": 13, "y": 1}, + {"label": "r13", "x": 14, "y": 1}, + {"label": "r14", "x": 15, "y": 1}, + + {"label": "ccw", "x": 16.5, "y": 1}, + {"label": "cw", "x": 17.5, "y": 1}, + + {"label": "r20", "x": 10.5, "y": 2}, + {"label": "r21", "x": 11.5, "y": 2}, + {"label": "r22", "x": 12.5, "y": 2}, + {"label": "r23", "x": 13.5, "y": 2}, + {"label": "r24", "x": 14.5, "y": 2}, + {"label": "r25", "x": 15.5, "y": 2}, + + {"label": "r30", "x": 9, "y": 3}, + {"label": "r31", "x": 10, "y": 3}, + {"label": "r32", "x": 11, "y": 3}, + {"label": "r33", "x": 12, "y": 3}, + {"label": "r34", "x": 13, "y": 3}, + {"label": "r35", "x": 14, "y": 3}, + {"label": "r36", "x": 15, "y": 3}, + {"label": "r37", "x": 16, "y": 3}, + + {"label": "r40", "x": 9.5, "y": 4}, + {"label": "r41", "x": 10.5, "y": 4}, + {"label": "r42", "x": 11.5, "y": 4}, + {"label": "r43", "x": 12.5, "y": 4}, + {"label": "r44", "x": 13.5, "y": 4}, + {"label": "r45", "x": 14.5, "y": 4}, + {"label": "r46", "x": 15.5, "y": 4}, + {"label": "r47", "x": 16.5, "y": 4}, + + {"label": "r50", "x": 9, "y": 5}, + {"label": "r51", "x": 10, "y": 5}, + {"label": "r52", "x": 11, "y": 5}, + {"label": "r53", "x": 12, "y": 5}, + {"label": "r54", "x": 13, "y": 5}, + {"label": "r55", "x": 14, "y": 5}, + {"label": "r56", "x": 15, "y": 5}, + {"label": "r57", "x": 16, "y": 5}, + {"label": "r58", "x": 17, "y": 5} + ] + } + } +} diff --git a/keyboards/bandominedoni/keymaps/default/keymap.c b/keyboards/bandominedoni/keymaps/default/keymap.c new file mode 100644 index 0000000000..bfa49dfe17 --- /dev/null +++ b/keyboards/bandominedoni/keymaps/default/keymap.c @@ -0,0 +1,84 @@ +/* Copyright 2021 3araht + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { +#ifndef PEDAL_NORMALLY_CLOSED + _OPEN, +#endif + _CLOSE, +#ifdef PEDAL_NORMALLY_CLOSED + _OPEN, +#endif + _FN +}; + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_OPEN] = LAYOUT( + MI_Gs_1, MI_As_1, MI_Cs_2, MI_F_2, MI_Gs_3, + MI_E_1, MI_A_1, MI_G_2, MI_Ds_2, MI_F_3, MI_As_2, MI_F_1, + MI_D_2, MI_A_2, MI_C_3, MI_E_3, MI_C_2, MI_G_1, TG_SWAP, + MI_E_2, MI_Gs_2, MI_B_2, MI_D_3, MI_Fs_3, MI_Cs_3, MI_Fs_1, + MI_D_1, MI_B_1, MI_G_3, MI_A_3, MI_Ds_3, MI_Fs_2, MI_Ds_1, MI_C_1, + + MO_SWAP, MI_B_5, MI_Gs_5, MI_G_5, MI_F_5, FN_MUTE, + MI_Cs_3, MI_A_5, MI_Fs_5, MI_E_5, MI_Ds_5, KC_VOLD, KC_VOLU, + MI_C_3, MI_D_3, MI_G_3, MI_As_4, MI_C_5, MI_D_5, + TG_SWAP, MI_B_2, MI_E_3, MI_Cs_4, MI_Fs_3, MI_A_3, MI_C_4, MI_E_4, + MI_A_2, MI_F_3, MI_As_3, MI_Gs_3, MI_B_3, MI_D_4, MI_Gs_4, MI_B_4, + MI_Gs_2, MI_As_2, MI_Ds_3, MI_F_4, MI_Ds_4, MI_Fs_4, MI_A_4, MI_Cs_5, MI_G_4 + ), + + [_CLOSE] = LAYOUT( + MI_Gs_1, MI_As_1, MI_Ds_2, MI_Ds_3, MI_G_3, + MI_D_1, MI_D_2, MI_As_2, MI_C_3, MI_Cs_2, MI_C_2, MI_Fs_1, + MI_G_1, MI_G_2, MI_B_2, MI_D_3, MI_F_3, MI_Fs_2, TG_SWAP, + MI_A_1, MI_E_2, MI_A_2, MI_Cs_3, MI_E_3, MI_Gs_2, MI_B_1, + MI_E_1, MI_E_2, MI_Fs_3, MI_Gs_3, MI_B_3, MI_F_2, MI_Cs_1, MI_F_1, + + MO_SWAP, MI_A_5, MI_Gs_5, MI_Fs_5, MI_F_5, FN_MUTE, + MI_C_3, MI_G_5, MI_As_4, MI_C_5, MI_Ds_5, KC_VOLD, KC_VOLU, + MI_D_3, MI_Cs_3, MI_Gs_3, MI_As_3, MI_C_4, MI_D_5, + TG_SWAP, MI_B_2, MI_Fs_3, MI_Fs_4, MI_G_3, MI_B_3, MI_D_4, MI_G_4, + MI_A_2, MI_F_3, MI_E_3, MI_A_3, MI_Cs_4, MI_E_4, MI_A_4, MI_Cs_5, + MI_Gs_2, MI_As_2, MI_Ds_3, MI_F_4, MI_E_4, MI_Gs_4, MI_B_4, MI_E_5, MI_Ds_4 + ), + + [_FN] = LAYOUT( + DF_SWAP, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + + _______, MI_OCTD, MI_OCTU, MI_VELD, MI_VELU, _______, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX + ) +}; + +void keyboard_post_init_user(void) { + // Set octave to MI_OCT_0 + midi_config.octave = MI_OCT_0 - MIDI_OCTAVE_MIN; + + // avoid using 127 since it is used as a special number in some sound sources. + midi_config.velocity = MIDI_INITIAL_VELOCITY; +}; diff --git a/keyboards/bandominedoni/keymaps/default/readme.md b/keyboards/bandominedoni/keymaps/default/readme.md new file mode 100644 index 0000000000..e6ec2ad10d --- /dev/null +++ b/keyboards/bandominedoni/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for bandominedoni diff --git a/keyboards/bandominedoni/keymaps/led/keymap.c b/keyboards/bandominedoni/keymaps/led/keymap.c new file mode 100644 index 0000000000..7693557df3 --- /dev/null +++ b/keyboards/bandominedoni/keymaps/led/keymap.c @@ -0,0 +1,221 @@ +/* Copyright 2021 3araht + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +#define DF_COLE DF(_COLEMAK) + +#define _________________QWERTY_L1_________________ KC_Q, KC_W, KC_E, KC_R, KC_T +#define _________________QWERTY_L2_________________ KC_A, KC_S, KC_D, KC_F, KC_G +#define _________________QWERTY_L3_________________ KC_Z, KC_X, KC_C, KC_V, KC_B + +#define _________________QWERTY_R1_________________ KC_Y, KC_U, KC_I, KC_O, KC_P +#define _________________QWERTY_R2_________________ KC_H, KC_J, KC_K, KC_L, KC_SCLN +#define _________________QWERTY_R3_________________ KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH + +#define _________________COLEMAK_L1________________ KC_Q, KC_W, KC_F, KC_P, KC_G +#define _________________COLEMAK_L2________________ KC_A, KC_R, KC_S, KC_T, KC_D +#define _________________COLEMAK_L3________________ KC_Z, KC_X, KC_C, KC_V, KC_B + +#define _________________COLEMAK_R1________________ KC_J, KC_L, KC_U, KC_Y, KC_SCLN +#define _________________COLEMAK_R2________________ KC_H, KC_N, KC_E, KC_I, KC_O +#define _________________COLEMAK_R3________________ KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH + +#define _________________NUMBER_L__________________ KC_1, KC_2, KC_3, KC_4, KC_5 +// #define _________________NUMBER_R__________________ KC_6, KC_7, KC_8, KC_9, KC_0 + +#define _________________FUNC__L___________________ KC_F1, KC_F2, KC_F3, KC_F4, KC_F5 +// #define _________________FUNC__R___________________ KC_F6, KC_F7, KC_F8, KC_F9, KC_F10 + +// Defines names for use in layer keycodes and the keymap +enum layer_names { +#ifndef PEDAL_NORMALLY_CLOSED + _OPEN, +#endif + _CLOSE, +#ifdef PEDAL_NORMALLY_CLOSED + _OPEN, +#endif + _QWERTY, + _COLEMAK, + _MISC, + _FN +}; + +// Alias layout macros that expand groups of keys. +#define LAYOUT_wrapper(...) LAYOUT(__VA_ARGS__) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_OPEN] = LAYOUT( + MI_Gs_1, MI_As_1, MI_Cs_2, MI_F_2, MI_Gs_3, + MI_E_1, MI_A_1, MI_G_2, MI_Ds_2, MI_F_3, MI_As_2, MI_F_1, + MI_D_2, MI_A_2, MI_C_3, MI_E_3, MI_C_2, MI_G_1, TG_SWAP, + MI_E_2, MI_Gs_2, MI_B_2, MI_D_3, MI_Fs_3, MI_Cs_3, MI_Fs_1, + MI_D_1, MI_B_1, MI_G_3, MI_A_3, MI_Ds_3, MI_Fs_2, MI_Ds_1, MI_C_1, + + MO_SWAP, MI_B_5, MI_Gs_5, MI_G_5, MI_F_5, FN_MUTE, + MI_Cs_3, MI_A_5, MI_Fs_5, MI_E_5, MI_Ds_5, KC_VOLD, KC_VOLU, + MI_C_3, MI_D_3, MI_G_3, MI_As_4, MI_C_5, MI_D_5, + TG_SWAP, MI_B_2, MI_E_3, MI_Cs_4, MI_Fs_3, MI_A_3, MI_C_4, MI_E_4, + MI_A_2, MI_F_3, MI_As_3, MI_Gs_3, MI_B_3, MI_D_4, MI_Gs_4, MI_B_4, + MI_Gs_2, MI_As_2, MI_Ds_3, MI_F_4, MI_Ds_4, MI_Fs_4, MI_A_4, MI_Cs_5, MI_G_4 + ), + + [_CLOSE] = LAYOUT( + MI_Gs_1, MI_As_1, MI_Ds_2, MI_Ds_3, MI_G_3, + MI_D_1, MI_D_2, MI_As_2, MI_C_3, MI_Cs_2, MI_C_2, MI_Fs_1, + MI_G_1, MI_G_2, MI_B_2, MI_D_3, MI_F_3, MI_Fs_2, TG_SWAP, + MI_A_1, MI_E_2, MI_A_2, MI_Cs_3, MI_E_3, MI_Gs_2, MI_B_1, + MI_E_1, MI_E_2, MI_Fs_3, MI_Gs_3, MI_B_3, MI_F_2, MI_Cs_1, MI_F_1, + + MO_SWAP, MI_A_5, MI_Gs_5, MI_Fs_5, MI_F_5, FN_MUTE, + MI_C_3, MI_G_5, MI_As_4, MI_C_5, MI_Ds_5, KC_VOLD, KC_VOLU, + MI_D_3, MI_Cs_3, MI_Gs_3, MI_As_3, MI_C_4, MI_D_5, + TG_SWAP, MI_B_2, MI_Fs_3, MI_Fs_4, MI_G_3, MI_B_3, MI_D_4, MI_G_4, + MI_A_2, MI_F_3, MI_E_3, MI_A_3, MI_Cs_4, MI_E_4, MI_A_4, MI_Cs_5, + MI_Gs_2, MI_As_2, MI_Ds_3, MI_F_4, MI_E_4, MI_Gs_4, MI_B_4, MI_E_5, MI_Ds_4 + ), + + [_QWERTY] = LAYOUT_wrapper( + _________________NUMBER_L__________________, + KC_GESC, KC_TAB, _________________QWERTY_L1_________________, + KC_CAPS, _________________QWERTY_L2_________________, KC_H, + KC_LSFT, _________________QWERTY_L3_________________, KC_N, + KC_LCTL, KC_GRV, KC_LGUI, KC_LALT, MIS_EIS, KC_SPC, KC_SPC, KC_PSCR, + + MO(_MISC), KC_LBRC, KC_RBRC, KC_BSLS, KC_0, _______, + KC_6, KC_7, KC_8, KC_9, KC_BSPC, _______, _______, + _________________QWERTY_R1_________________, KC_DEL, + KC_PGUP, KC_G, _________________QWERTY_R2_________________, KC_ENT, + KC_PGDN, KC_B, _________________QWERTY_R3_________________, KC_RSFT, + KC_HOME, KC_END, KC_SPC, MIS_KAN, KC_RALT, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT + ), + + [_COLEMAK] = LAYOUT_wrapper( + _________________NUMBER_L__________________, + KC_GESC, KC_TAB, _________________COLEMAK_L1________________, + KC_LCTL, _________________COLEMAK_L2________________, KC_ENT, + KC_LSFT, _________________COLEMAK_L3________________, KC_M, + KC_CAPS, KC_GRV, KC_LGUI, KC_LALT, MIS_EIS, KC_SPC, KC_SPC, KC_PSCR, + + MO(_MISC), KC_LBRC, KC_RBRC, KC_BSLS, KC_0, _______, + KC_6, KC_7, KC_8, KC_9, KC_BSPC, _______, _______, + _________________COLEMAK_R1________________, KC_DEL, + KC_PGUP, KC_D, _________________COLEMAK_R2________________, KC_ENT, + KC_PGDN, KC_B, _________________COLEMAK_R3________________, KC_RSFT, + KC_HOME, KC_END, KC_SPC, MIS_KAN, KC_RALT, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT + ), + + [_MISC] = LAYOUT_wrapper( + _________________FUNC__L___________________, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, + + _______, _______, _______, _______, KC_F10, _______, + KC_F6, KC_F7, KC_F8, KC_F9, _______, _______, _______, + _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, KC_QUOT, _______, + _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [_FN] = LAYOUT( + DF_SWAP, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, DF_QWER, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + DF_COLE, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, AG_NORM, AG_SWAP, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + + _______, MI_OCTD, MI_OCTU, MI_VELD, MI_VELU, _______, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + RGB_SAD, RGB_SAI, RGB_HUD, RGB_HUI, RGB_SPD, RGB_SPI, RGB_VAD, RGB_VAI, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RGB_RMOD, RGB_MOD, EEP_RST, RGB_TOG + ) +}; + +void eeconfig_init_user(void) { // EEPROM is getting reset! + #ifdef RGB_MATRIX_ENABLE + rgb_matrix_enable(); + rgb_matrix_set_speed(RGB_MATRIX_STARTUP_SPD); + rgb_matrix_sethsv(HSV_BLUE); + + rgb_matrix_mode(RGB_MATRIX_SOLID_REACTIVE); + // rgb_matrix_mode(RGB_MATRIX_RAINBOW_MOVING_CHEVRON); + #endif +} + +void keyboard_post_init_user(void) { + // Set octave to MI_OCT_0 + midi_config.octave = MI_OCT_0 - MIDI_OCTAVE_MIN; + + // avoid using 127 since it is used as a special number in some sound sources. + midi_config.velocity = MIDI_INITIAL_VELOCITY; + + // party mode (for LED soldering test. Enable rainbow color effect, and disable led_indicator to check all LEDs) + rgb_matrix_mode(RGB_MATRIX_RAINBOW_MOVING_CHEVRON); +}; + +#ifdef RGB_MATRIX_ENABLE +void rgb_matrix_indicators_user(void) { + if (rgb_matrix_is_enabled()) { // turn the lights on when it is enabled. + uint8_t layer = biton32(layer_state); + switch (layer) { + case _CLOSE: + // rgb_matrix_set_color(pgm_read_byte(&convert_led_location2number[11]), RGB_RED); // RGB_TOG <- too heavy. + + // Close state indicator + rgb_matrix_set_color( 0, RGB_DARKWHITE); // oc + break; + + case _FN: + // left hand side + rgb_matrix_set_color( 46, RGB_DARKORANGE); // DF_OPEN + rgb_matrix_set_color( 48, RGB_DARKWHITE); // DF_QWER + rgb_matrix_set_color( 60, RGB_DARKWHITE); // DF_COLE + + rgb_matrix_set_color( 73, RGB_DARKYELLOW); // AG_SWAP + rgb_matrix_set_color( 72, RGB_DARKYELLOW); // AG_NORM + + + // right hand side + rgb_matrix_set_color( 1, RGB_DARKYELLOW); // MI_OCTD + rgb_matrix_set_color(13, RGB_DARKGREEN); // MI_OCTU + rgb_matrix_set_color(14, RGB_DARKYELLOW); // MI_VELD + rgb_matrix_set_color(25, RGB_DARKGREEN); // MI_VELU + + rgb_matrix_set_color( 6, RGB_DARKBLUE); // RGB_SAD + rgb_matrix_set_color( 9, RGB_DARKBLUE); // RGB_SAI + rgb_matrix_set_color(18, RGB_DARKBLUE); // RGB_HUD + rgb_matrix_set_color(21, RGB_DARKBLUE); // RGB_HUI + rgb_matrix_set_color(29, RGB_DARKBLUE); // RGB_SPD + rgb_matrix_set_color(32, RGB_DARKBLUE); // RGB_SPI + rgb_matrix_set_color(36, RGB_DARKBLUE); // RGB_VAD + rgb_matrix_set_color(39, RGB_DARKBLUE); // RGB_VAI + + rgb_matrix_set_color(31, RGB_DARKBLUE); // RGB_RMOD + rgb_matrix_set_color(37, RGB_DARKBLUE); // RGB_MOD + rgb_matrix_set_color(38, RGB_DARKPINK); // EEP_RST + rgb_matrix_set_color(40, RGB_DARKRED); // RGB_TOG + + rgb_matrix_set_color(41, RGB_DARKORANGE); // _FN + break; + } + } +} +#endif diff --git a/keyboards/bandominedoni/keymaps/led/readme.md b/keyboards/bandominedoni/keymaps/led/readme.md new file mode 100644 index 0000000000..e6ec2ad10d --- /dev/null +++ b/keyboards/bandominedoni/keymaps/led/readme.md @@ -0,0 +1 @@ +# The default keymap for bandominedoni diff --git a/keyboards/bandominedoni/keymaps/led/rules.mk b/keyboards/bandominedoni/keymaps/led/rules.mk new file mode 100644 index 0000000000..a7583d38c8 --- /dev/null +++ b/keyboards/bandominedoni/keymaps/led/rules.mk @@ -0,0 +1,2 @@ +RGB_MATRIX_ENABLE = yes # Use RGB matrix (Don't enable this when RGBLIGHT_ENABLE is used.) +RGB_MATRIX_CUSTOM_USER = yes # diff --git a/keyboards/bandominedoni/keymaps/via/config.h b/keyboards/bandominedoni/keymaps/via/config.h new file mode 100644 index 0000000000..99e39626ce --- /dev/null +++ b/keyboards/bandominedoni/keymaps/via/config.h @@ -0,0 +1,18 @@ +/* Copyright 2021 3araht + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + #pragma once + +#define DYNAMIC_KEYMAP_LAYER_COUNT 5 diff --git a/keyboards/bandominedoni/keymaps/via/keymap.c b/keyboards/bandominedoni/keymaps/via/keymap.c new file mode 100644 index 0000000000..59e074228b --- /dev/null +++ b/keyboards/bandominedoni/keymaps/via/keymap.c @@ -0,0 +1,150 @@ +/* Copyright 2021 3araht + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { +#ifndef PEDAL_NORMALLY_CLOSED + _OPEN, +#endif + _CLOSE, +#ifdef PEDAL_NORMALLY_CLOSED + _OPEN, +#endif + _MISC, + _FN +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_OPEN] = LAYOUT( + MI_Gs_1, MI_As_1, MI_Cs_2, MI_F_2, MI_Gs_3, + MI_E_1, MI_A_1, MI_G_2, MI_Ds_2, MI_F_3, MI_As_2, MI_F_1, + MI_D_2, MI_A_2, MI_C_3, MI_E_3, MI_C_2, MI_G_1, TG_SWAP, + MI_E_2, MI_Gs_2, MI_B_2, MI_D_3, MI_Fs_3, MI_Cs_3, MI_Fs_1, + MI_D_1, MI_B_1, MI_G_3, MI_A_3, MI_Ds_3, MI_Fs_2, MI_Ds_1, MI_C_1, + + MO_SWAP, MI_B_5, MI_Gs_5, MI_G_5, MI_F_5, FN_MUTE, + MI_Cs_3, MI_A_5, MI_Fs_5, MI_E_5, MI_Ds_5, KC_VOLD, KC_VOLU, + MI_C_3, MI_D_3, MI_G_3, MI_As_4, MI_C_5, MI_D_5, + TG_SWAP, MI_B_2, MI_E_3, MI_Cs_4, MI_Fs_3, MI_A_3, MI_C_4, MI_E_4, + MI_A_2, MI_F_3, MI_As_3, MI_Gs_3, MI_B_3, MI_D_4, MI_Gs_4, MI_B_4, + MI_Gs_2, MI_As_2, MI_Ds_3, MI_F_4, MI_Ds_4, MI_Fs_4, MI_A_4, MI_Cs_5, MI_G_4 + ), + + [_CLOSE] = LAYOUT( + MI_Gs_1, MI_As_1, MI_Ds_2, MI_Ds_3, MI_G_3, + MI_D_1, MI_D_2, MI_As_2, MI_C_3, MI_Cs_2, MI_C_2, MI_Fs_1, + MI_G_1, MI_G_2, MI_B_2, MI_D_3, MI_F_3, MI_Fs_2, TG_SWAP, + MI_A_1, MI_E_2, MI_A_2, MI_Cs_3, MI_E_3, MI_Gs_2, MI_B_1, + MI_E_1, MI_E_2, MI_Fs_3, MI_Gs_3, MI_B_3, MI_F_2, MI_Cs_1, MI_F_1, + + MO_SWAP, MI_A_5, MI_Gs_5, MI_Fs_5, MI_F_5, FN_MUTE, + MI_C_3, MI_G_5, MI_As_4, MI_C_5, MI_Ds_5, KC_VOLD, KC_VOLU, + MI_D_3, MI_Cs_3, MI_Gs_3, MI_As_3, MI_C_4, MI_D_5, + TG_SWAP, MI_B_2, MI_Fs_3, MI_Fs_4, MI_G_3, MI_B_3, MI_D_4, MI_G_4, + MI_A_2, MI_F_3, MI_E_3, MI_A_3, MI_Cs_4, MI_E_4, MI_A_4, MI_Cs_5, + MI_Gs_2, MI_As_2, MI_Ds_3, MI_F_4, MI_E_4, MI_Gs_4, MI_B_4, MI_E_5, MI_Ds_4 + ), + + [_MISC] = LAYOUT( + _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, + + _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [_FN] = LAYOUT( + DF_SWAP, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + + _______, MI_OCTD, MI_OCTU, MI_VELD, MI_VELU, _______, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + RGB_SAD, RGB_SAI, RGB_HUD, RGB_HUI, RGB_SPD, RGB_SPI, RGB_VAD, RGB_VAI, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RGB_RMOD, RGB_MOD, EEP_RST, RGB_TOG + ) +}; + +void eeconfig_init_user(void) { // EEPROM is getting reset! + #ifdef RGB_MATRIX_ENABLE + rgb_matrix_enable(); + rgb_matrix_set_speed(RGB_MATRIX_STARTUP_SPD); + rgb_matrix_sethsv(HSV_BLUE); + + rgb_matrix_mode(RGB_MATRIX_SOLID_REACTIVE); + // rgb_matrix_mode(RGB_MATRIX_RAINBOW_MOVING_CHEVRON); + #endif +} + +void keyboard_post_init_user(void) { + // Set octave to MI_OCT_0 + midi_config.octave = MI_OCT_0 - MIDI_OCTAVE_MIN; + + // avoid using 127 since it is used as a special number in some sound sources. + midi_config.velocity = MIDI_INITIAL_VELOCITY; +}; + +#ifdef RGB_MATRIX_ENABLE +void rgb_matrix_indicators_user(void) { + if (rgb_matrix_is_enabled()) { // turn the lights on when it is enabled. + uint8_t layer = biton32(layer_state); + switch (layer) { + case _CLOSE: + // rgb_matrix_set_color(pgm_read_byte(&convert_led_location2number[11]), RGB_RED); // RGB_TOG <- too heavy. + + // Close state indicator + rgb_matrix_set_color( 0, RGB_DARKWHITE); // oc + break; + + case _FN: + // rgb_matrix_set_color(pgm_read_byte(&convert_led_location2number[11]), RGB_RED); // RGB_TOG <- too heavy. + rgb_matrix_set_color(14, RGB_DARKYELLOW); // MI_OCTD + rgb_matrix_set_color(25, RGB_DARKGREEN); // MI_OCTU + rgb_matrix_set_color(14, RGB_DARKYELLOW); // MI_VELD + rgb_matrix_set_color(25, RGB_DARKGREEN); // MI_VELU + + rgb_matrix_set_color( 6, RGB_DARKBLUE); // RGB_SAD + rgb_matrix_set_color( 9, RGB_DARKBLUE); // RGB_SAI + rgb_matrix_set_color(18, RGB_DARKBLUE); // RGB_HUD + rgb_matrix_set_color(21, RGB_DARKBLUE); // RGB_HUI + rgb_matrix_set_color(29, RGB_DARKBLUE); // RGB_SPD + rgb_matrix_set_color(32, RGB_DARKBLUE); // RGB_SPI + rgb_matrix_set_color(36, RGB_DARKBLUE); // RGB_VAD + rgb_matrix_set_color(39, RGB_DARKBLUE); // RGB_VAI + + rgb_matrix_set_color(31, RGB_DARKBLUE); // RGB_RMOD + rgb_matrix_set_color(37, RGB_DARKBLUE); // RGB_MOD + rgb_matrix_set_color(38, RGB_DARKPINK); // EEP_RST + rgb_matrix_set_color(40, RGB_DARKRED); // RGB_TOG + + rgb_matrix_set_color(41, RGB_DARKORANGE); // _FN + break; + } + } +} +#endif diff --git a/keyboards/bandominedoni/keymaps/via/readme.md b/keyboards/bandominedoni/keymaps/via/readme.md new file mode 100644 index 0000000000..6af1cf92bb --- /dev/null +++ b/keyboards/bandominedoni/keymaps/via/readme.md @@ -0,0 +1 @@ +# The default VIA keymap for bandominedoni diff --git a/keyboards/bandominedoni/keymaps/via/rules.mk b/keyboards/bandominedoni/keymaps/via/rules.mk new file mode 100644 index 0000000000..925056c3dc --- /dev/null +++ b/keyboards/bandominedoni/keymaps/via/rules.mk @@ -0,0 +1,3 @@ +RGB_MATRIX_ENABLE = yes # Use RGB matrix (Don't enable this when RGBLIGHT_ENABLE is used.) +VIA_ENABLE = yes +MOUSEKEY_ENABLE = yes # Mouse keys diff --git a/keyboards/bandominedoni/readme.md b/keyboards/bandominedoni/readme.md new file mode 100644 index 0000000000..99d28daf0c --- /dev/null +++ b/keyboards/bandominedoni/readme.md @@ -0,0 +1,22 @@ +# bandominedoni + +![bandoMIneDonI](https://github.com/3araht/bandoMIneDonI/blob/main/pictures/bandoMIneDonI.jpg) + +bandoMIneDonI keyboard is a MIDI split keyboard with bandoneon layout. +Close and Open of the bellow is emulated by either using a sustain pedal, or tapping a dedicated keys to alter the close and open status. + +* Keyboard Maintainer: [3araht](https://github.com/3araht) +* Hardware Supported: bandoMIneDonI keyboard, a split keyboard mainly work as bandoneon MIDI keyboard. +* Hardware Availability: [BOOTH](https://3araht.booth.pm/). + +Make example for this keyboard (after setting up your build environment): + + make bandominedoni:default + +Flashing example for this keyboard: + + make bandominedoni:default:flash + +Uncomment "PEDAL_NORMALLY_CLOSED" in bandominedoni.h when normally-on pedal is used for switching Open/Close state. + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/bandominedoni/rgb_matrix_user.inc b/keyboards/bandominedoni/rgb_matrix_user.inc new file mode 100644 index 0000000000..72f5b4f664 --- /dev/null +++ b/keyboards/bandominedoni/rgb_matrix_user.inc @@ -0,0 +1,16 @@ +#ifdef RGB_MATRIX_KEYREACTIVE_ENABLED +RGB_MATRIX_EFFECT(my_party_rocks) + +# ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS + +bool my_party_rocks(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + HSV hsv = {rand() & 0xFF, rand() & 0xFF, rgb_matrix_config.hsv.v}; + RGB rgb = rgb_matrix_hsv_to_rgb(hsv); + // rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + rgb_matrix_set_color_all(rgb.r, rgb.g, rgb.b); + return led_max < DRIVER_LED_TOTAL; +} + +# endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS +#endif // RGB_MATRIX_KEYREACTIVE_ENABLED diff --git a/keyboards/bandominedoni/rules.mk b/keyboards/bandominedoni/rules.mk new file mode 100644 index 0000000000..5618c1ca93 --- /dev/null +++ b/keyboards/bandominedoni/rules.mk @@ -0,0 +1,28 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = caterina + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +MIDI_ENABLE = yes # MIDI support +ENCODER_ENABLE = yes # encoder on mute button +SPLIT_KEYBOARD = yes # Enables split keyboard support +RGB_MATRIX_ENABLE = no # Use RGB matrix (Don't enable this when RGBLIGHT_ENABLE is used.) +RGB_MATRIX_DRIVER = WS2812 # + +LTO_ENABLE = yes From bd0040068e28b6df20693df2453591fc8f3f073a Mon Sep 17 00:00:00 2001 From: kopibeng <52724926+kopibeng@users.noreply.github.com> Date: Wed, 22 Sep 2021 05:15:09 +0800 Subject: [PATCH 061/595] [Keyboard] Add support for MNK88 (#14435) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- keyboards/kopibeng/mnk88/chconf.h | 31 ++++++ keyboards/kopibeng/mnk88/config.h | 82 ++++++++++++++ keyboards/kopibeng/mnk88/info.json | 102 ++++++++++++++++++ .../kopibeng/mnk88/keymaps/default/keymap.c | 61 +++++++++++ keyboards/kopibeng/mnk88/keymaps/via/keymap.c | 61 +++++++++++ keyboards/kopibeng/mnk88/keymaps/via/rules.mk | 1 + keyboards/kopibeng/mnk88/mnk88.c | 36 +++++++ keyboards/kopibeng/mnk88/mnk88.h | 39 +++++++ keyboards/kopibeng/mnk88/readme.md | 19 ++++ keyboards/kopibeng/mnk88/rules.mk | 25 +++++ 10 files changed, 457 insertions(+) create mode 100644 keyboards/kopibeng/mnk88/chconf.h create mode 100644 keyboards/kopibeng/mnk88/config.h create mode 100644 keyboards/kopibeng/mnk88/info.json create mode 100644 keyboards/kopibeng/mnk88/keymaps/default/keymap.c create mode 100644 keyboards/kopibeng/mnk88/keymaps/via/keymap.c create mode 100644 keyboards/kopibeng/mnk88/keymaps/via/rules.mk create mode 100644 keyboards/kopibeng/mnk88/mnk88.c create mode 100644 keyboards/kopibeng/mnk88/mnk88.h create mode 100644 keyboards/kopibeng/mnk88/readme.md create mode 100644 keyboards/kopibeng/mnk88/rules.mk diff --git a/keyboards/kopibeng/mnk88/chconf.h b/keyboards/kopibeng/mnk88/chconf.h new file mode 100644 index 0000000000..5d57f9aece --- /dev/null +++ b/keyboards/kopibeng/mnk88/chconf.h @@ -0,0 +1,31 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +/* + * This file was auto-generated by: + * `qmk chibios-confmigrate -i keyboards/kopibeng/xt8x/chconf.h -r platforms/chibios/common/configs/chconf.h` + */ + +#pragma once + +#define CH_CFG_ST_FREQUENCY 10000 + +#define CH_CFG_OPTIMIZE_SPEED FALSE + +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE + +#include_next + diff --git a/keyboards/kopibeng/mnk88/config.h b/keyboards/kopibeng/mnk88/config.h new file mode 100644 index 0000000000..d8b4422523 --- /dev/null +++ b/keyboards/kopibeng/mnk88/config.h @@ -0,0 +1,82 @@ +/* Copyright 2021 Samuel Lu + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4B50 // 'KP' kopibeng +#define PRODUCT_ID 0x8800 +#define DEVICE_VER 0x0001 +#define MANUFACTURER kopibeng +#define PRODUCT MNK88 + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 17 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { A8, B15, A9, B12, A3, B14 } +#define MATRIX_COL_PINS { A2, A1, A0, B11, B10, B2, F1, B1, B0, A7, A6, A5, F0, A4, C15, C14, C13 } + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +#define LED_CAPS_LOCK_PIN B3 +#define LED_SCROLL_LOCK_PIN A15 + +#define RGB_DI_PIN A10 +#ifdef RGB_DI_PIN + #define RGBLED_NUM 19 + #define RGBLIGHT_HUE_STEP 8 + #define RGBLIGHT_SAT_STEP 8 + #define RGBLIGHT_VAL_STEP 8 + #define RGBLIGHT_LIMIT_VAL 200 /* The maximum brightness level */ + #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ +// #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ + #define RGBLIGHT_EFFECT_BREATHING + #define RGBLIGHT_EFFECT_RAINBOW_MOOD + #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS + #define RGBLIGHT_EFFECT_STATIC_GRADIENT + #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE diff --git a/keyboards/kopibeng/mnk88/info.json b/keyboards/kopibeng/mnk88/info.json new file mode 100644 index 0000000000..f8e313f610 --- /dev/null +++ b/keyboards/kopibeng/mnk88/info.json @@ -0,0 +1,102 @@ +{ + "keyboard_name": "MNK88", + "maintainer": "kopibeng", + "url": "https://monokei.co/", + "layouts": { + "LAYOUT_all": { + "layout": [ + { "label": "0,0", "x": 0, "y": 0 }, + { "label": "0,1", "x": 1.25, "y": 0 }, + { "label": "0,2", "x": 2.25, "y": 0 }, + { "label": "0,3", "x": 3.25, "y": 0 }, + { "label": "0,4", "x": 4.25, "y": 0 }, + { "label": "0,5", "x": 5.5, "y": 0 }, + { "label": "0,6", "x": 6.5, "y": 0 }, + { "label": "0,7", "x": 7.5, "y": 0 }, + { "label": "0,8", "x": 8.5, "y": 0 }, + { "label": "0,9", "x": 9.75, "y": 0 }, + { "label": "0,10", "x": 10.75, "y": 0 }, + { "label": "0,11", "x": 11.75, "y": 0 }, + { "label": "0,12", "x": 12.75, "y": 0 }, + { "label": "0,13", "x": 14, "y": 0 }, + { "label": "0,14", "x": 15.25, "y": 0 }, + { "label": "0,15", "x": 16.25, "y": 0 }, + { "label": "0,16", "x": 17.25, "y": 0 }, + { "label": "1,0", "x": 0, "y": 1.25 }, + { "label": "1,1", "x": 1, "y": 1.25 }, + { "label": "1,2", "x": 2, "y": 1.25 }, + { "label": "1,3", "x": 3, "y": 1.25 }, + { "label": "1,4", "x": 4, "y": 1.25 }, + { "label": "1,5", "x": 5, "y": 1.25 }, + { "label": "1,6", "x": 6, "y": 1.25 }, + { "label": "1,7", "x": 7, "y": 1.25 }, + { "label": "1,8", "x": 8, "y": 1.25 }, + { "label": "1,9", "x": 9, "y": 1.25 }, + { "label": "1,10", "x": 10, "y": 1.25 }, + { "label": "1,11", "x": 11, "y": 1.25 }, + { "label": "1,12", "x": 12, "y": 1.25 }, + { "label": "2,12", "x": 13, "y": 1.25 }, + { "label": "1,13", "x": 14, "y": 1.25 }, + { "label": "1,14", "x": 15.25, "y": 1.25 }, + { "label": "1,15", "x": 16.25, "y": 1.25 }, + { "label": "1,16", "x": 17.25, "y": 1.25 }, + { "label": "2,0", "w": 1.5, "x": 0, "y": 2.25 }, + { "label": "2,1", "x": 1.5, "y": 2.25 }, + { "label": "2,2", "x": 2.5, "y": 2.25 }, + { "label": "2,3", "x": 3.5, "y": 2.25 }, + { "label": "2,4", "x": 4.5, "y": 2.25 }, + { "label": "2,5", "x": 5.5, "y": 2.25 }, + { "label": "2,6", "x": 6.5, "y": 2.25 }, + { "label": "2,7", "x": 7.5, "y": 2.25 }, + { "label": "2,8", "x": 8.5, "y": 2.25 }, + { "label": "2,9", "x": 9.5, "y": 2.25 }, + { "label": "2,10", "x": 10.5, "y": 2.25 }, + { "label": "2,11", "x": 11.5, "y": 2.25 }, + { "label": "3,12", "x": 12.5, "y": 2.25 }, + { "label": "2,13", "w": 1.5, "x": 13.5, "y": 2.25 }, + { "label": "2,14", "x": 15.25, "y": 2.25 }, + { "label": "2,15", "x": 16.25, "y": 2.25 }, + { "label": "2,16", "x": 17.25, "y": 2.25 }, + { "label": "3,0", "w": 1.75, "x": 0, "y": 3.25 }, + { "label": "3,1", "x": 1.75, "y": 3.25 }, + { "label": "3,2", "x": 2.75, "y": 3.25 }, + { "label": "3,3", "x": 3.75, "y": 3.25 }, + { "label": "3,4", "x": 4.75, "y": 3.25 }, + { "label": "3,5", "x": 5.75, "y": 3.25 }, + { "label": "3,6", "x": 6.75, "y": 3.25 }, + { "label": "3,7", "x": 7.75, "y": 3.25 }, + { "label": "3,8", "x": 8.75, "y": 3.25 }, + { "label": "3,9", "x": 9.75, "y": 3.25 }, + { "label": "3,10", "x": 10.75, "y": 3.25 }, + { "label": "3,11", "x": 11.75, "y": 3.25 }, + { "label": "3,13", "w": 2.25, "x": 12.75, "y": 3.25 }, + { "label": "4,0", "w": 1.25, "x": 0, "y": 4.25 }, + { "label": "4,1", "x": 1.25, "y": 4.25 }, + { "label": "4,2", "x": 2.25, "y": 4.25 }, + { "label": "4,3", "x": 3.25, "y": 4.25 }, + { "label": "4,4", "x": 4.25, "y": 4.25 }, + { "label": "4,5", "x": 5.25, "y": 4.25 }, + { "label": "4,6", "x": 6.25, "y": 4.25 }, + { "label": "4,7", "x": 7.25, "y": 4.25 }, + { "label": "4,8", "x": 8.25, "y": 4.25 }, + { "label": "4,9", "x": 9.25, "y": 4.25 }, + { "label": "4,10", "x": 10.25, "y": 4.25 }, + { "label": "4,11", "x": 11.25, "y": 4.25 }, + { "label": "4,12", "w": 1.75, "x": 12.25, "y": 4.25 }, + { "label": "4,13", "x": 14, "y": 4.25 }, + { "label": "4,15", "x": 16.25, "y": 4.25 }, + { "label": "5,0", "w": 1.25, "x": 0, "y": 5.25 }, + { "label": "5,1", "w": 1.25, "x": 1.25, "y": 5.25 }, + { "label": "5,2", "w": 1.25, "x": 2.5, "y": 5.25 }, + { "label": "5,6", "w": 6.25, "x": 3.75, "y": 5.25 }, + { "label": "5,10", "w": 1.25, "x": 10, "y": 5.25 }, + { "label": "5,11", "w": 1.25, "x": 11.25, "y": 5.25 }, + { "label": "5,12", "w": 1.25, "x": 12.5, "y": 5.25 }, + { "label": "5,13", "w": 1.25, "x": 13.75, "y": 5.25 }, + { "label": "5,14", "x": 15.25, "y": 5.25 }, + { "label": "5,15", "x": 16.25, "y": 5.25 }, + { "label": "4,16", "x": 17.25, "y": 5.25 } + ] + } + } +} \ No newline at end of file diff --git a/keyboards/kopibeng/mnk88/keymaps/default/keymap.c b/keyboards/kopibeng/mnk88/keymaps/default/keymap.c new file mode 100644 index 0000000000..407daa0988 --- /dev/null +++ b/keyboards/kopibeng/mnk88/keymaps/default/keymap.c @@ -0,0 +1,61 @@ +/* Copyright 2021 Samuel Lu + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + // Default layer + [0] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(2), KC_UP, KC_RGHT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN + ), + + // Fn1 Layer + [1] = LAYOUT_all( + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_VOLU, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_MNXT, KC_VOLD, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + // Fn2 Layer + [2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + // Fn3 Layer + [3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), +}; + diff --git a/keyboards/kopibeng/mnk88/keymaps/via/keymap.c b/keyboards/kopibeng/mnk88/keymaps/via/keymap.c new file mode 100644 index 0000000000..0fa17b2d08 --- /dev/null +++ b/keyboards/kopibeng/mnk88/keymaps/via/keymap.c @@ -0,0 +1,61 @@ +/* Copyright 2021 Samuel Lu + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + // Default layer + [0] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(2), KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + // Fn1 Layer + [1] = LAYOUT_all( + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_VOLU, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_MNXT, KC_VOLD, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + // Fn2 Layer + [2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + // Fn3 Layer + [3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), +}; + diff --git a/keyboards/kopibeng/mnk88/keymaps/via/rules.mk b/keyboards/kopibeng/mnk88/keymaps/via/rules.mk new file mode 100644 index 0000000000..036bd6d1c3 --- /dev/null +++ b/keyboards/kopibeng/mnk88/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes \ No newline at end of file diff --git a/keyboards/kopibeng/mnk88/mnk88.c b/keyboards/kopibeng/mnk88/mnk88.c new file mode 100644 index 0000000000..ac40692d48 --- /dev/null +++ b/keyboards/kopibeng/mnk88/mnk88.c @@ -0,0 +1,36 @@ +/* Copyright 2021 Samuel Lu + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "mnk88.h" + +void matrix_init_kb(void) { + + setPinOutput(LED_CAPS_LOCK_PIN); + setPinOutput(LED_SCROLL_LOCK_PIN); + + matrix_init_user(); +} + +bool led_update_kb(led_t led_state) { + + bool res = led_update_user(led_state); + + if(res) { + writePin(LED_CAPS_LOCK_PIN, led_state.caps_lock); + writePin(LED_SCROLL_LOCK_PIN, led_state.scroll_lock); + } + return res; +} diff --git a/keyboards/kopibeng/mnk88/mnk88.h b/keyboards/kopibeng/mnk88/mnk88.h new file mode 100644 index 0000000000..4fabf95df1 --- /dev/null +++ b/keyboards/kopibeng/mnk88/mnk88.h @@ -0,0 +1,39 @@ +/* Copyright 2021 Samuel Lu + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +#define ____ KC_NO + + + +#define LAYOUT_all( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K212, K113, K114, K115, K116, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K312, K213, K214, K215, K216, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, \ + K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K415, \ + K500, K501, K502, K506, K510, K511, K512, K513, K514, K515, K416 \ +) { \ + {K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016}, \ + {K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116}, \ + {K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216}, \ + {K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, ____, ____, ____}, \ + {K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, ____, K415, K416}, \ + {K500, K501, K502, ____, ____, ____, K506, ____, ____, ____, K510, K511, K512, K513, K514, K515, ____} \ +} diff --git a/keyboards/kopibeng/mnk88/readme.md b/keyboards/kopibeng/mnk88/readme.md new file mode 100644 index 0000000000..700dc8b248 --- /dev/null +++ b/keyboards/kopibeng/mnk88/readme.md @@ -0,0 +1,19 @@ +# MNK88 + +![MNK88](https://i.imgur.com/0risyWg.png) + +A QMK-powered, VIA-enabled 88-key (F13) TKL PCB with support for ANSI/ISO layouts, split Backspace, split Right Shift and 6.25U/7U bottom row. + +* Keyboard Maintainer: kopibeng +* Hardware Supported: A TKL keyboard with STM32F072 MCU +* Hardware Availability: https://monokei.co/ + +Make example for this keyboard (after setting up your build environment): + + make kopibeng/mnk88:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Reset + +Press the RESET switch on bottom side of PCB to enter bootloader. diff --git a/keyboards/kopibeng/mnk88/rules.mk b/keyboards/kopibeng/mnk88/rules.mk new file mode 100644 index 0000000000..cdfcbb418e --- /dev/null +++ b/keyboards/kopibeng/mnk88/rules.mk @@ -0,0 +1,25 @@ +# MCU name +MCU = STM32F072 + +# Bootloader selection +BOOTLOADER = stm32-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +ENCODER_ENABLE = no # Enable Encoder + +# Enter lower-power sleep mode when on the ChibiOS idle thread +OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE \ No newline at end of file From be273bd0032d09b622368be22a3c99df63cecf37 Mon Sep 17 00:00:00 2001 From: qpockets <69164255+qpockets@users.noreply.github.com> Date: Tue, 21 Sep 2021 17:16:16 -0400 Subject: [PATCH 062/595] [Keyboard] add wanten keyboard to QMK (#14410) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- keyboards/wanten/config.h | 161 +++++++++++++++++++++ keyboards/wanten/info.json | 152 +++++++++++++++++++ keyboards/wanten/keymaps/2u_bars/config.h | 27 ++++ keyboards/wanten/keymaps/2u_bars/keymap.c | 104 +++++++++++++ keyboards/wanten/keymaps/2u_bars/rules.mk | 1 + keyboards/wanten/keymaps/625_bar/config.h | 27 ++++ keyboards/wanten/keymaps/625_bar/keymap.c | 104 +++++++++++++ keyboards/wanten/keymaps/625_bar/rules.mk | 1 + keyboards/wanten/keymaps/default/config.h | 27 ++++ keyboards/wanten/keymaps/default/keymap.c | 104 +++++++++++++ keyboards/wanten/keymaps/default/readme.md | 1 + keyboards/wanten/keymaps/default/rules.mk | 1 + keyboards/wanten/readme.md | 27 ++++ keyboards/wanten/rules.mk | 22 +++ keyboards/wanten/wanten.c | 17 +++ keyboards/wanten/wanten.h | 65 +++++++++ 16 files changed, 841 insertions(+) create mode 100644 keyboards/wanten/config.h create mode 100644 keyboards/wanten/info.json create mode 100644 keyboards/wanten/keymaps/2u_bars/config.h create mode 100644 keyboards/wanten/keymaps/2u_bars/keymap.c create mode 100644 keyboards/wanten/keymaps/2u_bars/rules.mk create mode 100644 keyboards/wanten/keymaps/625_bar/config.h create mode 100644 keyboards/wanten/keymaps/625_bar/keymap.c create mode 100644 keyboards/wanten/keymaps/625_bar/rules.mk create mode 100644 keyboards/wanten/keymaps/default/config.h create mode 100644 keyboards/wanten/keymaps/default/keymap.c create mode 100644 keyboards/wanten/keymaps/default/readme.md create mode 100644 keyboards/wanten/keymaps/default/rules.mk create mode 100644 keyboards/wanten/readme.md create mode 100644 keyboards/wanten/rules.mk create mode 100644 keyboards/wanten/wanten.c create mode 100644 keyboards/wanten/wanten.h diff --git a/keyboards/wanten/config.h b/keyboards/wanten/config.h new file mode 100644 index 0000000000..ed6294f73f --- /dev/null +++ b/keyboards/wanten/config.h @@ -0,0 +1,161 @@ +/* +Copyright 2021 qpockets + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x7170 //qp +#define PRODUCT_ID 0x7774 //wt +#define DEVICE_VER 0x0001 +#define MANUFACTURER qpockets +#define PRODUCT wanten + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { F0, F7, B3, D5 } +#define MATRIX_COL_PINS { F4, F1, B5, B6, C6, C7, D4, E6, D2, B1, B2, D3 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* ROTARY ENCODERS */ +#define ENCODERS_PAD_A { F5, D6 } +#define ENCODERS_PAD_B { F6, D7 } + +#define ENCODER_RESOLUTION 4 +//#define ENCODER_DIRECTION_FLIP + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 4 + +/*nothing below here is needed for wanten unless enabling RGB. the correct RGB_DI_PIN is defined, the rest is up to you o7 */ + +//#define RGB_DI_PIN B0 +//#ifdef RGB_DI_PIN +//# define RGBLED_NUM 16 +//# define RGBLIGHT_HUE_STEP 8 +//# define RGBLIGHT_SAT_STEP 8 +//# define RGBLIGHT_VAL_STEP 8 +//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ +//# define RGBLIGHT_ANIMATIONS +/*== or choose animations ==*/ +//# define RGBLIGHT_EFFECT_BREATHING +//# define RGBLIGHT_EFFECT_RAINBOW_MOOD +//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL +//# define RGBLIGHT_EFFECT_SNAKE +//# define RGBLIGHT_EFFECT_KNIGHT +//# define RGBLIGHT_EFFECT_CHRISTMAS +//# define RGBLIGHT_EFFECT_STATIC_GRADIENT +//# define RGBLIGHT_EFFECT_RGB_TEST +//# define RGBLIGHT_EFFECT_ALTERNATING +/*== customize breathing effect ==*/ +/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +/*==== use exp() and sin() ====*/ +//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +//#endif + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +//#define LED_NUM_LOCK_PIN B0 +//#define LED_CAPS_LOCK_PIN B1 +//#define LED_SCROLL_LOCK_PIN B2 +//#define LED_COMPOSE_PIN B3 +//#define LED_KANA_PIN B4 + +//#define BACKLIGHT_PIN B7 +//#define BACKLIGHT_LEVELS 3 +//#define BACKLIGHT_BREATHING + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +//#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +//#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/wanten/info.json b/keyboards/wanten/info.json new file mode 100644 index 0000000000..e683761582 --- /dev/null +++ b/keyboards/wanten/info.json @@ -0,0 +1,152 @@ +{ + "keyboard_name": "wanten", + "url": "", + "maintainer": "qpockets", + "layouts": { + "LAYOUT_default": { + "layout": [ + {"label":"Play", "x":0, "y":0}, + {"label":"q", "x":1, "y":0}, + {"label":"w", "x":2, "y":0}, + {"label":"e", "x":3, "y":0}, + {"label":"r", "x":4, "y":0}, + {"label":"t", "x":5, "y":0}, + {"label":"Del", "x":6, "y":0, "w":1.75}, + {"label":"y", "x":7.75, "y":0}, + {"label":"u", "x":8.75, "y":0}, + {"label":"i", "x":9.75, "y":0}, + {"label":"o", "x":10.75, "y":0}, + {"label":"p", "x":11.75, "y":0}, + {"label":"Next", "x":0, "y":1}, + {"label":"a", "x":1, "y":1}, + {"label":"s", "x":2, "y":1}, + {"label":"d", "x":3, "y":1}, + {"label":"f", "x":4, "y":1}, + {"label":"g", "x":5, "y":1}, + {"label":"Tab", "x":6, "y":1, "w":1.75}, + {"label":"h", "x":7.75, "y":1}, + {"label":"j", "x":8.75, "y":1}, + {"label":"k", "x":9.75, "y":1}, + {"label":"l", "x":10.75, "y":1}, + {"label":"\"", "x":11.75, "y":1}, + {"label":"Prev", "x":0, "y":2}, + {"label":"z", "x":1, "y":2}, + {"label":"x", "x":2, "y":2}, + {"label":"c", "x":3, "y":2}, + {"label":"v", "x":4, "y":2}, + {"label":"b", "x":5, "y":2}, + {"label":"Shift", "x":6, "y":2, "w":1.75}, + {"label":"n", "x":7.75, "y":2}, + {"label":"m", "x":8.75, "y":2}, + {"label":"<", "x":9.75, "y":2}, + {"label":">", "x":10.75, "y":2}, + {"label":"?", "x":11.75, "y":2}, + {"label":"LCtrl", "x":0, "y":3, "w":1.25}, + {"label":"LGui", "x":1.25, "y":3, "w":1.25}, + {"label":"LAlt", "x":2.5, "y":3, "w":1.25}, + {"label":"Back", "x":3.75, "y":3, "w":3}, + {"label":"Space", "x":6.75, "y":3, "w":3}, + {"label":"RCtrl", "x":9.75, "y":3}, + {"label":"RGui", "x":10.75, "y":3}, + {"label":"RAlt", "x":11.75, "y":3} + ] + }, + + "LAYOUT_2u_bars": { + "layout": [ + {"label":"Play", "x":0, "y":0}, + {"label":"q", "x":1, "y":0}, + {"label":"w", "x":2, "y":0}, + {"label":"e", "x":3, "y":0}, + {"label":"r", "x":4, "y":0}, + {"label":"t", "x":5, "y":0}, + {"label":"Del", "x":6, "y":0, "w":1.75}, + {"label":"y", "x":7.75, "y":0}, + {"label":"u", "x":8.75, "y":0}, + {"label":"i", "x":9.75, "y":0}, + {"label":"o", "x":10.75, "y":0}, + {"label":"p", "x":11.75, "y":0}, + {"label":"Next", "x":0, "y":1}, + {"label":"a", "x":1, "y":1}, + {"label":"s", "x":2, "y":1}, + {"label":"d", "x":3, "y":1}, + {"label":"f", "x":4, "y":1}, + {"label":"g", "x":5, "y":1}, + {"label":"Tab", "x":6, "y":1, "w":1.75}, + {"label":"h", "x":7.75, "y":1}, + {"label":"j", "x":8.75, "y":1}, + {"label":"k", "x":9.75, "y":1}, + {"label":"l", "x":10.75, "y":1}, + {"label":"\"", "x":11.75, "y":1}, + {"label":"Prev", "x":0, "y":2}, + {"label":"z", "x":1, "y":2}, + {"label":"x", "x":2, "y":2}, + {"label":"c", "x":3, "y":2}, + {"label":"v", "x":4, "y":2}, + {"label":"b", "x":5, "y":2}, + {"label":"Shift", "x":6, "y":2, "w":1.75}, + {"label":"n", "x":7.75, "y":2}, + {"label":"m", "x":8.75, "y":2}, + {"label":"<", "x":9.75, "y":2}, + {"label":">", "x":10.75, "y":2}, + {"label":"?", "x":11.75, "y":2}, + {"label":"PSCR", "x":0, "y":3, "w":1.25}, + {"label":"LAlt", "x":1.25, "y":3, "w":1.25}, + {"label":"LGui", "x":2.5, "y":3, "w":1.25}, + {"label":"LCtl", "x":3.75, "y":3}, + {"label":"Back", "x":4.75, "y":3, "w":2}, + {"label":"Space", "x":6.75, "y":3, "w":2.25}, + {"label":"RCtrl", "x":9, "y":3}, + {"label":"RGui", "x":10, "y":3, "w":1.25}, + {"label":"RAlt", "x":11.25, "y":3, "w":1.5} + ] + }, + + "LAYOUT_625_bar": { + "layout": [ + {"label":"Play", "x":0, "y":0}, + {"label":"q", "x":1, "y":0}, + {"label":"w", "x":2, "y":0}, + {"label":"e", "x":3, "y":0}, + {"label":"r", "x":4, "y":0}, + {"label":"t", "x":5, "y":0}, + {"label":"Del", "x":6, "y":0, "w":1.75}, + {"label":"y", "x":7.75, "y":0}, + {"label":"u", "x":8.75, "y":0}, + {"label":"i", "x":9.75, "y":0}, + {"label":"o", "x":10.75, "y":0}, + {"label":"p", "x":11.75, "y":0}, + {"label":"Next", "x":0, "y":1}, + {"label":"a", "x":1, "y":1}, + {"label":"s", "x":2, "y":1}, + {"label":"d", "x":3, "y":1}, + {"label":"f", "x":4, "y":1}, + {"label":"g", "x":5, "y":1}, + {"label":"Tab", "x":6, "y":1, "w":1.75}, + {"label":"h", "x":7.75, "y":1}, + {"label":"j", "x":8.75, "y":1}, + {"label":"k", "x":9.75, "y":1}, + {"label":"l", "x":10.75, "y":1}, + {"label":"\"", "x":11.75, "y":1}, + {"label":"Prev", "x":0, "y":2}, + {"label":"z", "x":1, "y":2}, + {"label":"x", "x":2, "y":2}, + {"label":"c", "x":3, "y":2}, + {"label":"v", "x":4, "y":2}, + {"label":"b", "x":5, "y":2}, + {"label":"Shift", "x":6, "y":2, "w":1.75}, + {"label":"n", "x":7.75, "y":2}, + {"label":"m", "x":8.75, "y":2}, + {"label":"<", "x":9.75, "y":2}, + {"label":">", "x":10.75, "y":2}, + {"label":"?", "x":11.75, "y":2}, + {"label":"LAlt", "x":0, "y":3, "w":1.25}, + {"label":"LGui", "x":1.25, "y":3, "w":1.25}, + {"label":"LCtrl", "x":2.5, "y":3, "w":1.25}, + {"label":"Space", "x":3.75, "y":3, "w":6.25}, + {"label":"RAlt", "x":10, "y":3, "w":1.25}, + {"label":"RCtrl", "x":11.25, "y":3, "w":1.5} + ] + } + } +} \ No newline at end of file diff --git a/keyboards/wanten/keymaps/2u_bars/config.h b/keyboards/wanten/keymaps/2u_bars/config.h new file mode 100644 index 0000000000..51e54382af --- /dev/null +++ b/keyboards/wanten/keymaps/2u_bars/config.h @@ -0,0 +1,27 @@ +/* Copyright 2021 qpockets + + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +/*Modtaps*/ +#define TAPPING_TERM 145 +#define IGNORE_MOD_TAP_INTERRUPT + +/*Combos*/ +#ifdef COMBO_ENABLE +# define COMBO_COUNT 5 +# define COMBO_TERM 25 +#endif diff --git a/keyboards/wanten/keymaps/2u_bars/keymap.c b/keyboards/wanten/keymaps/2u_bars/keymap.c new file mode 100644 index 0000000000..5e2dd8aa09 --- /dev/null +++ b/keyboards/wanten/keymaps/2u_bars/keymap.c @@ -0,0 +1,104 @@ +/* Copyright 2021 qpockets + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +enum layers{ + _BASE, + _GAME, + _SYM, + _NAV + +}; + +enum combo_events { + COMBO_BSPC, + COMBO_ENT, + COMBO_TAB, + COMBO_ESC, + COMBO_DEL +}; +#define KC_DN_BSPC LT(_NAV, KC_BSPC) +#define KC_UP_SPC LT(_SYM, KC_SPC) +#define KC_GUP_BSPC LT(_SYM, KC_BSPC) +#define KC_SF LSFT_T(KC_F) +#define KC_SJ RSFT_T(KC_J) +#define SNIP S(G(KC_S)) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_2u_bars( + KC_MPLY, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_DEL, KC_Y, KC_U, KC_I, KC_O, KC_P, + KC_MNXT, KC_A, KC_S, KC_D, KC_SF, KC_G, KC_RGUI, KC_H, KC_SJ, KC_K, KC_L, KC_QUOT, + KC_MPRV, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_ENT, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, + SNIP, KC_LGUI, KC_LCTL, KC_LCTL, KC_DN_BSPC, KC_UP_SPC, KC_RALT, TG(_GAME), KC_MUTE + ), + + [_GAME] = LAYOUT_2u_bars( + KC_TRNS, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_ESC, KC_Y, KC_U, KC_I, KC_O, KC_P, + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_LSFT, KC_H, KC_SJ, KC_K, KC_L, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_ENT, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, + KC_LCTRL, KC_LGUI, KC_LALT, KC_ESC, KC_SPC, KC_GUP_BSPC, KC_RALT, KC_TRNS, KC_BSPC + ), + + [_SYM] = LAYOUT_2u_bars( + KC_TRNS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_TRNS, KC_6, KC_7, KC_8, KC_9, KC_0, + KC_TRNS, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_TRNS, KC_CIRC, KC_AMPR, KC_ASTR, KC_EQUAL, KC_MINS, + KC_TRNS, KC_PIPE, KC_BSLS, KC_LPRN, KC_LBRC, KC_SCLN, KC_TRNS, KC_COLN, KC_RBRC, KC_RPRN, KC_PLUS, KC_UNDS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + [_NAV] = LAYOUT_2u_bars( + KC_TRNS, KC_TRNS, KC_HOME, KC_UP, KC_END, KC_PGUP, RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_BSPC, + KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_PGDN, KC_TRNS, KC_F5, KC_F6, KC_F7, KC_F8, KC_TAB, + KC_TRNS, KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_TRNS, KC_CAPS, KC_F9, KC_F10, KC_F11, KC_F12, KC_ENT, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + +}; + +bool encoder_update_user(uint8_t index, bool clockwise) { + if (index == 0) { /* left encoder */ + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } else if (index == 1) { /* center encoder */ + if (clockwise) { + tap_code(KC_WH_U); + } else { + tap_code(KC_WH_D); + } + } + return true; +} + +#ifdef COMBO_ENABLE +const uint16_t PROGMEM combo_bspc[] = {KC_O, KC_P, COMBO_END}; +const uint16_t PROGMEM combo_ent[] = {KC_K, KC_L, COMBO_END}; +const uint16_t PROGMEM combo_tab[] = {KC_S, KC_D, COMBO_END}; +const uint16_t PROGMEM combo_esc[] = {KC_T, KC_Y, COMBO_END}; +const uint16_t PROGMEM combo_del[] = {KC_Q, KC_W, COMBO_END}; + +combo_t key_combos[COMBO_COUNT] = { + [COMBO_BSPC] = COMBO(combo_bspc,KC_BSPC), + [COMBO_ENT] = COMBO(combo_ent,KC_ENT), + [COMBO_TAB] = COMBO(combo_tab,KC_TAB), + [COMBO_ESC] = COMBO(combo_esc,KC_ESC), + [COMBO_DEL] = COMBO(combo_del,KC_DEL) +}; +#endif + diff --git a/keyboards/wanten/keymaps/2u_bars/rules.mk b/keyboards/wanten/keymaps/2u_bars/rules.mk new file mode 100644 index 0000000000..ab1e438182 --- /dev/null +++ b/keyboards/wanten/keymaps/2u_bars/rules.mk @@ -0,0 +1 @@ +COMBO_ENABLE = yes diff --git a/keyboards/wanten/keymaps/625_bar/config.h b/keyboards/wanten/keymaps/625_bar/config.h new file mode 100644 index 0000000000..51e54382af --- /dev/null +++ b/keyboards/wanten/keymaps/625_bar/config.h @@ -0,0 +1,27 @@ +/* Copyright 2021 qpockets + + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +/*Modtaps*/ +#define TAPPING_TERM 145 +#define IGNORE_MOD_TAP_INTERRUPT + +/*Combos*/ +#ifdef COMBO_ENABLE +# define COMBO_COUNT 5 +# define COMBO_TERM 25 +#endif diff --git a/keyboards/wanten/keymaps/625_bar/keymap.c b/keyboards/wanten/keymaps/625_bar/keymap.c new file mode 100644 index 0000000000..b1cc213d1b --- /dev/null +++ b/keyboards/wanten/keymaps/625_bar/keymap.c @@ -0,0 +1,104 @@ +/* Copyright 2021 qpockets + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +enum layers{ + _BASE, + _GAME, + _SYM, + _NAV + +}; + +enum combo_events { + COMBO_BSPC, + COMBO_ENT, + COMBO_TAB, + COMBO_ESC, + COMBO_DEL +}; +#define KC_DZ LT(_NAV, KC_Z) +#define KC_UP_SPC LT(_SYM, KC_SPC) +//#define KC_GUP_BSPC LT(_SYM, KC_BSPC) +#define KC_SF LSFT_T(KC_F) +#define KC_SJ RSFT_T(KC_J) +#define SNIP S(G(KC_S)) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_625_bar( + KC_MPLY, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_DEL, KC_Y, KC_U, KC_I, KC_O, KC_P, + KC_MNXT, KC_A, KC_S, KC_D, KC_SF, KC_G, KC_RGUI, KC_H, KC_SJ, KC_K, KC_L, KC_QUOT, + KC_MPRV, KC_DZ, KC_X, KC_C, KC_V, KC_B, KC_ENT, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, + SNIP, KC_LGUI, KC_LCTL, KC_UP_SPC, KC_RALT, TG(_GAME) + ), + + [_GAME] = LAYOUT_625_bar( + KC_TRNS, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_ESC, KC_Y, KC_U, KC_I, KC_O, KC_P, + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_LSFT, KC_H, KC_SJ, KC_K, KC_L, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_ENT, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, + KC_LCTRL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_TRNS + ), + + [_SYM] = LAYOUT_625_bar( + KC_TRNS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_TRNS, KC_6, KC_7, KC_8, KC_9, KC_0, + KC_TRNS, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_TRNS, KC_CIRC, KC_AMPR, KC_ASTR, KC_EQUAL, KC_MINS, + KC_TRNS, KC_PIPE, KC_BSLS, KC_LPRN, KC_LBRC, KC_SCLN, KC_TRNS, KC_COLN, KC_RBRC, KC_RPRN, KC_PLUS, KC_UNDS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + [_NAV] = LAYOUT_625_bar( + KC_TRNS, KC_TRNS, KC_HOME, KC_UP, KC_END, KC_PGUP, RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_BSPC, + KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_PGDN, KC_TRNS, KC_F5, KC_F6, KC_F7, KC_F8, KC_TAB, + KC_TRNS, KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_TRNS, KC_CAPS, KC_F9, KC_F10, KC_F11, KC_F12, KC_ENT, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + +}; + +bool encoder_update_user(uint8_t index, bool clockwise) { + if (index == 0) { /* left encoder */ + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } else if (index == 1) { /* center encoder */ + if (clockwise) { + tap_code(KC_WH_D); + } else { + tap_code(KC_WH_U); + } + } + return true; +} + +#ifdef COMBO_ENABLE +const uint16_t PROGMEM combo_bspc[] = {KC_O, KC_P, COMBO_END}; +const uint16_t PROGMEM combo_ent[] = {KC_K, KC_L, COMBO_END}; +const uint16_t PROGMEM combo_tab[] = {KC_S, KC_D, COMBO_END}; +const uint16_t PROGMEM combo_esc[] = {KC_T, KC_Y, COMBO_END}; +const uint16_t PROGMEM combo_del[] = {KC_Q, KC_W, COMBO_END}; + +combo_t key_combos[COMBO_COUNT] = { + [COMBO_BSPC] = COMBO(combo_bspc,KC_BSPC), + [COMBO_ENT] = COMBO(combo_ent,KC_ENT), + [COMBO_TAB] = COMBO(combo_tab,KC_TAB), + [COMBO_ESC] = COMBO(combo_esc,KC_ESC), + [COMBO_DEL] = COMBO(combo_del,KC_DEL) +}; +#endif + diff --git a/keyboards/wanten/keymaps/625_bar/rules.mk b/keyboards/wanten/keymaps/625_bar/rules.mk new file mode 100644 index 0000000000..ab1e438182 --- /dev/null +++ b/keyboards/wanten/keymaps/625_bar/rules.mk @@ -0,0 +1 @@ +COMBO_ENABLE = yes diff --git a/keyboards/wanten/keymaps/default/config.h b/keyboards/wanten/keymaps/default/config.h new file mode 100644 index 0000000000..51e54382af --- /dev/null +++ b/keyboards/wanten/keymaps/default/config.h @@ -0,0 +1,27 @@ +/* Copyright 2021 qpockets + + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +/*Modtaps*/ +#define TAPPING_TERM 145 +#define IGNORE_MOD_TAP_INTERRUPT + +/*Combos*/ +#ifdef COMBO_ENABLE +# define COMBO_COUNT 5 +# define COMBO_TERM 25 +#endif diff --git a/keyboards/wanten/keymaps/default/keymap.c b/keyboards/wanten/keymaps/default/keymap.c new file mode 100644 index 0000000000..f0cec2cc45 --- /dev/null +++ b/keyboards/wanten/keymaps/default/keymap.c @@ -0,0 +1,104 @@ +/* Copyright 2021 qpockets + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +enum layers{ + _BASE, + _GAME, + _SYM, + _NAV + +}; + +enum combo_events { + COMBO_BSPC, + COMBO_ENT, + COMBO_TAB, + COMBO_ESC, + COMBO_DEL +}; +#define KC_DN_BSPC LT(_NAV, KC_BSPC) +#define KC_UP_SPC LT(_SYM, KC_SPC) +#define KC_GUP_BSPC LT(_SYM, KC_BSPC) +#define KC_SF LSFT_T(KC_F) +#define KC_SJ RSFT_T(KC_J) +#define SNIP S(G(KC_S)) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_default( + KC_MPLY, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_DEL, KC_Y, KC_U, KC_I, KC_O, KC_P, + KC_MNXT, KC_A, KC_S, KC_D, KC_SF, KC_G, KC_RGUI, KC_H, KC_SJ, KC_K, KC_L, KC_QUOT, + KC_MPRV, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_ENT, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, + SNIP, KC_LGUI, KC_LCTL, KC_DN_BSPC, KC_UP_SPC, KC_RALT, TG(_GAME), KC_MUTE + ), + + [_GAME] = LAYOUT_default( + KC_TRNS, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_ESC, KC_Y, KC_U, KC_I, KC_O, KC_P, + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_LSFT, KC_H, KC_SJ, KC_K, KC_L, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_ENT, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, + KC_LCTRL, KC_LGUI, KC_LALT, KC_SPC, KC_GUP_BSPC, KC_RALT, KC_TRNS, KC_BSPC + ), + + [_SYM] = LAYOUT_default( + KC_TRNS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_TRNS, KC_6, KC_7, KC_8, KC_9, KC_0, + KC_TRNS, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_TRNS, KC_CIRC, KC_AMPR, KC_ASTR, KC_EQUAL, KC_MINS, + KC_TRNS, KC_PIPE, KC_BSLS, KC_LPRN, KC_LBRC, KC_SCLN, KC_TRNS, KC_COLN, KC_RBRC, KC_RPRN, KC_PLUS, KC_UNDS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + [_NAV] = LAYOUT_default( + KC_TRNS, KC_TRNS, KC_HOME, KC_UP, KC_END, KC_PGUP, RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_BSPC, + KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_PGDN, KC_TRNS, KC_F5, KC_F6, KC_F7, KC_F8, KC_TAB, + KC_TRNS, KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_TRNS, KC_CAPS, KC_F9, KC_F10, KC_F11, KC_F12, KC_ENT, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + +}; + +bool encoder_update_user(uint8_t index, bool clockwise) { + if (index == 0) { /* left encoder */ + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } else if (index == 1) { /* center encoder */ + if (clockwise) { + tap_code(KC_WH_U); + } else { + tap_code(KC_WH_D); + } + } + return true; +} + +#ifdef COMBO_ENABLE +const uint16_t PROGMEM combo_bspc[] = {KC_O, KC_P, COMBO_END}; +const uint16_t PROGMEM combo_ent[] = {KC_K, KC_L, COMBO_END}; +const uint16_t PROGMEM combo_tab[] = {KC_S, KC_D, COMBO_END}; +const uint16_t PROGMEM combo_esc[] = {KC_T, KC_Y, COMBO_END}; +const uint16_t PROGMEM combo_del[] = {KC_Q, KC_W, COMBO_END}; + +combo_t key_combos[COMBO_COUNT] = { + [COMBO_BSPC] = COMBO(combo_bspc,KC_BSPC), + [COMBO_ENT] = COMBO(combo_ent,KC_ENT), + [COMBO_TAB] = COMBO(combo_tab,KC_TAB), + [COMBO_ESC] = COMBO(combo_esc,KC_ESC), + [COMBO_DEL] = COMBO(combo_del,KC_DEL) +}; +#endif + diff --git a/keyboards/wanten/keymaps/default/readme.md b/keyboards/wanten/keymaps/default/readme.md new file mode 100644 index 0000000000..5a2b63c0bb --- /dev/null +++ b/keyboards/wanten/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for wanten diff --git a/keyboards/wanten/keymaps/default/rules.mk b/keyboards/wanten/keymaps/default/rules.mk new file mode 100644 index 0000000000..ab1e438182 --- /dev/null +++ b/keyboards/wanten/keymaps/default/rules.mk @@ -0,0 +1 @@ +COMBO_ENABLE = yes diff --git a/keyboards/wanten/readme.md b/keyboards/wanten/readme.md new file mode 100644 index 0000000000..90dd1ae132 --- /dev/null +++ b/keyboards/wanten/readme.md @@ -0,0 +1,27 @@ +# wanten + +![wanten](https://i.imgur.com/d7o1Edf.png) + +an ortho drop in PCB for Van cases + +* Keyboard Maintainer: [qpockets](https://github.com/qpockets) +* Hardware Supported: V1 wanten PCB +* Hardware Availability: [pocketspace discord server](https://discord.gg/fKbTxraHc6) + +Make example for this keyboard (after setting up your build environment): + + make wanten:default + +Flashing example for this keyboard: + + make wanten:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (top left key or encoder) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB +* **Keycode in layout**: Press the key mapped to `RESET` if it is available diff --git a/keyboards/wanten/rules.mk b/keyboards/wanten/rules.mk new file mode 100644 index 0000000000..3e05a4ed7f --- /dev/null +++ b/keyboards/wanten/rules.mk @@ -0,0 +1,22 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +ENCODER_ENABLE = yes \ No newline at end of file diff --git a/keyboards/wanten/wanten.c b/keyboards/wanten/wanten.c new file mode 100644 index 0000000000..15f3e64cb8 --- /dev/null +++ b/keyboards/wanten/wanten.c @@ -0,0 +1,17 @@ +/* Copyright 2021 qpockets + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "wanten.h" diff --git a/keyboards/wanten/wanten.h b/keyboards/wanten/wanten.h new file mode 100644 index 0000000000..e6db44fea6 --- /dev/null +++ b/keyboards/wanten/wanten.h @@ -0,0 +1,65 @@ +/* Copyright 2021 qpockets + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +#define XXX KC_NO + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT_default( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k50, k51, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k60, k61, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k70, k71, \ + k30, k31, k32, k35, k37, k39, k80, k81 \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k50, k51, }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k60, k61, }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k70, k71, }, \ + { k30, k31, k32, XXX, XXX, k35, XXX, k37, XXX, k39, k80, k81, } \ +} + +#define LAYOUT_625_bar( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k50, k51, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k60, k61, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k70, k71, \ + k30, k31, k32, k36, k39, k81 \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k50, k51, }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k60, k61, }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k70, k71, }, \ + { k30, k31, k32, XXX, XXX, XXX, k36, XXX, XXX, k39, XXX, k81, } \ +} + +#define LAYOUT_2u_bars( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k50, k51, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k60, k61, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k70, k71, \ + k30, k31, k32, k34, k35, k37, k38, k39, k81 \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k50, k51, }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k60, k61, }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k70, k71, }, \ + { k30, k31, k32, XXX, k34, k35, XXX, k37, k38, k39, XXX, k81, } \ +} From 922fbea5589b320ff57ca261f402bb9e63325496 Mon Sep 17 00:00:00 2001 From: bt66tech <39931446+bt66@users.noreply.github.com> Date: Wed, 22 Sep 2021 04:45:26 +0700 Subject: [PATCH 063/595] [Keyboard] add via keymap support for bt66tech/bt66tech60 (#13818) Co-authored-by: root --- keyboards/bt66tech/bt66tech60/config.h | 6 +- .../bt66tech/bt66tech60/keymaps/via/keymap.c | 60 +++++++++++++++++++ .../bt66tech/bt66tech60/keymaps/via/rules.mk | 1 + 3 files changed, 64 insertions(+), 3 deletions(-) create mode 100644 keyboards/bt66tech/bt66tech60/keymaps/via/keymap.c create mode 100644 keyboards/bt66tech/bt66tech60/keymaps/via/rules.mk diff --git a/keyboards/bt66tech/bt66tech60/config.h b/keyboards/bt66tech/bt66tech60/config.h index ae2024074d..7083b0f70d 100644 --- a/keyboards/bt66tech/bt66tech60/config.h +++ b/keyboards/bt66tech/bt66tech60/config.h @@ -18,11 +18,11 @@ along with this program. If not, see . #pragma once /* USB Device descriptor parameter */ -#define VENDOR_ID 0xCA04 -#define PRODUCT_ID 0x6060 +#define VENDOR_ID 0x4254 +#define PRODUCT_ID 0x7070 #define DEVICE_VER 0x0001 #define MANUFACTURER bt66tech -#define PRODUCT bt66tech 60% +#define PRODUCT bt66tech 60% /* key matrix size */ #define MATRIX_ROWS 5 diff --git a/keyboards/bt66tech/bt66tech60/keymaps/via/keymap.c b/keyboards/bt66tech/bt66tech60/keymaps/via/keymap.c new file mode 100644 index 0000000000..498f11d67d --- /dev/null +++ b/keyboards/bt66tech/bt66tech60/keymaps/via/keymap.c @@ -0,0 +1,60 @@ +/* Copyright 2020 bt66tech + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +// enum layer_names { +// _BASE, +// _FN, +// _FN1 +// }; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + +[0] = LAYOUT_60_ansi( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, MO(1) + ), + + [1] = LAYOUT_60_ansi( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + KC_MS_ACCEL0, KC_MS_BTN1, KC_MS_UP, KC_MS_BTN2, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCREEN, KC_TRNS, KC_TRNS, KC_TRNS, + KC_MS_ACCEL1, KC_MS_LEFT, KC_MS_DOWN,KC_MS_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_MS_ACCEL2, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, MO(2), + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS + ), + + [2] = LAYOUT_60_ansi( + BL_TOGG, BL_STEP, BL_ON, BL_OFF, BL_INC, BL_DEC, BL_BRTG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_INC, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + [3] = LAYOUT_60_ansi( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) + +}; diff --git a/keyboards/bt66tech/bt66tech60/keymaps/via/rules.mk b/keyboards/bt66tech/bt66tech60/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/bt66tech/bt66tech60/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes From 32a96be09321870e7d7d084c893dee599e47132b Mon Sep 17 00:00:00 2001 From: Laneware <68452738+Laneware@users.noreply.github.com> Date: Wed, 22 Sep 2021 08:06:56 +1000 Subject: [PATCH 064/595] [Keyboard] Macro-1 keyboard by Laneware Peripherals (#14472) --- keyboards/macro1/config.h | 55 ++++++++++ keyboards/macro1/info.json | 84 +++++++++++++++ keyboards/macro1/keymaps/default/keymap.c | 64 ++++++++++++ keyboards/macro1/keymaps/macropad/keymap.c | 63 +++++++++++ keyboards/macro1/keymaps/southpaw/keymap.c | 63 +++++++++++ keyboards/macro1/keymaps/via/keymap.c | 103 ++++++++++++++++++ keyboards/macro1/keymaps/via/rules.mk | 1 + keyboards/macro1/macro1.c | 29 ++++++ keyboards/macro1/macro1.h | 115 +++++++++++++++++++++ keyboards/macro1/readme.md | 22 ++++ keyboards/macro1/rules.mk | 22 ++++ 11 files changed, 621 insertions(+) create mode 100644 keyboards/macro1/config.h create mode 100644 keyboards/macro1/info.json create mode 100644 keyboards/macro1/keymaps/default/keymap.c create mode 100644 keyboards/macro1/keymaps/macropad/keymap.c create mode 100644 keyboards/macro1/keymaps/southpaw/keymap.c create mode 100644 keyboards/macro1/keymaps/via/keymap.c create mode 100644 keyboards/macro1/keymaps/via/rules.mk create mode 100644 keyboards/macro1/macro1.c create mode 100644 keyboards/macro1/macro1.h create mode 100644 keyboards/macro1/readme.md create mode 100644 keyboards/macro1/rules.mk diff --git a/keyboards/macro1/config.h b/keyboards/macro1/config.h new file mode 100644 index 0000000000..54203ef2bf --- /dev/null +++ b/keyboards/macro1/config.h @@ -0,0 +1,55 @@ +/* Copyright 2021 Laneware Peripherals + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4C50 // "LP" = Laneware Peripherals +#define PRODUCT_ID 0x9999 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Laneware Peripherals +#define PRODUCT MACRO-1 + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 4 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { E6, B7, D0, D1, D2, B3 } +#define MATRIX_COL_PINS { D3, D4, D6, D7 } +#define UNUSED_PINS + +/*ENCODER*/ +#define ENCODERS_PAD_A { F0 } +#define ENCODERS_PAD_B { F1 } +#define ENCODER_RESOLUTION 4 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + + + diff --git a/keyboards/macro1/info.json b/keyboards/macro1/info.json new file mode 100644 index 0000000000..dbb7bafa74 --- /dev/null +++ b/keyboards/macro1/info.json @@ -0,0 +1,84 @@ +{ + "keyboard_name": "MACRO1", + "url": "", + "maintainer": "qmk", + "layouts":{ + "LAYOUT_numpad":{ + "layout":[ + {"label":"Mute", "x":0, "y":0}, + {"label":"Play", "x":2, "y":0}, + {"label":"Backspace", "x":3, "y":0}, + {"label":"Numlock", "x":0, "y":1}, + {"label":"/", "x":1, "y":1}, + {"label":"*", "x":2, "y":1}, + {"label":"-", "x":3, "y":1}, + {"label":"7", "x":0, "y":2}, + {"label":"8", "x":1, "y":2}, + {"label":"9", "x":2, "y":2}, + {"label":"+", "x":3, "y":2, "h":2}, + {"label":"4", "x":0, "y":3}, + {"label":"5", "x":1, "y":3}, + {"label":"6", "x":2, "y":3}, + {"label":"1", "x":0, "y":4}, + {"label":"2", "x":1, "y":4}, + {"label":"3", "x":2, "y":4}, + {"label":"Enter", "x":3, "y":4, "h":2}, + {"label":"0", "x":0, "y":5, "w":2}, + {"label":".", "x":2, "y":5} + ] + }, + + "LAYOUT_southpaw":{ + "layout":[ + {"label":"Mute", "x":0, "y":0}, + {"label":"Play", "x":2, "y":0}, + {"label":"Backspace", "x":3, "y":0}, + {"label":"Numlock", "x":0, "y":1}, + {"label":"/", "x":1, "y":1}, + {"label":"*", "x":2, "y":1}, + {"label":"-", "x":3, "y":1}, + {"label":"+", "x":0, "y":2, "h":2}, + {"label":"7", "x":1, "y":2}, + {"label":"8", "x":2, "y":2}, + {"label":"9", "x":3, "y":2}, + {"label":"4", "x":1, "y":3}, + {"label":"5", "x":2, "y":3}, + {"label":"6", "x":3, "y":3}, + {"label":"Enter", "x":0, "y":4, "h":2}, + {"label":"1", "x":1, "y":4}, + {"label":"2", "x":2, "y":4}, + {"label":"3", "x":3, "y":4}, + {"label":".", "x":1, "y":5}, + {"label":"0", "x":2, "y":5, "w":2} + ] + }, + + "LAYOUT_macropad":{ + "layout":[ + {"label":"Mute", "x":0, "y":0}, + {"label":"F1", "x":2, "y":0}, + {"label":"F2", "x":3, "y":0}, + {"label":"F3", "x":0, "y":1}, + {"label":"F4", "x":1, "y":1}, + {"label":"F5", "x":2, "y":1}, + {"label":"F6", "x":3, "y":1}, + {"label":"F7", "x":0, "y":2}, + {"label":"F8", "x":1, "y":2}, + {"label":"F9", "x":2, "y":2}, + {"label":"F10", "x":3, "y":2}, + {"label":"F11", "x":0, "y":3}, + {"label":"F12", "x":1, "y":3}, + {"label":"F13", "x":2, "y":3}, + {"label":"F14", "x":3, "y":3}, + {"label":"F15", "x":0, "y":4}, + {"label":"F16", "x":1, "y":4}, + {"label":"F17", "x":2, "y":4}, + {"label":"F18", "x":3, "y":4}, + {"label":"F19", "x":0, "y":5}, + {"label":"F20", "x":1, "y":5}, + {"label":"F21", "x":2, "y":5}, + {"label":"F22", "x":3, "y":5} + ] + } + } +} \ No newline at end of file diff --git a/keyboards/macro1/keymaps/default/keymap.c b/keyboards/macro1/keymaps/default/keymap.c new file mode 100644 index 0000000000..22cff4a718 --- /dev/null +++ b/keyboards/macro1/keymaps/default/keymap.c @@ -0,0 +1,64 @@ + /* Copyright 2021 Laneware Peripherals + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +/* + * ┌───┐ ┌───┬───┐ + * │K00│ │K02│K03│ + * └───┘ └───┴───┘ + * ┌───┬───┬───┬───┐ + * │K10│K11│K12│K13│ + * ├───┼───┼───┼───┤ + * │K20│K21│K22│K23│ + * ├───┼───┼───┤ │ + * │K30│K31│K32│ │ + * ├───┼───┼───┼───┤ + * │K40│K41│K42│K43│ + * ├───┴───┼───┤ │ + * │K50 │K52│ │ + * └───────┴───┴───┘ + */ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_numpad( + KC_MUTE, KC_MPLY, KC_BSPC, + KC_CALC, KC_KP_SLASH, KC_KP_ASTERISK, KC_KP_MINUS, + KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_PLUS, + KC_KP_4, KC_KP_5, KC_KP_6, + KC_KP_1, KC_KP_2, KC_KP_3, KC_KP_ENTER, + KC_KP_0, KC_KP_DOT), + + [1] = LAYOUT_numpad( + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS), + + [2] = LAYOUT_numpad( + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS), }; + + + + diff --git a/keyboards/macro1/keymaps/macropad/keymap.c b/keyboards/macro1/keymaps/macropad/keymap.c new file mode 100644 index 0000000000..68566fb53f --- /dev/null +++ b/keyboards/macro1/keymaps/macropad/keymap.c @@ -0,0 +1,63 @@ + /* Copyright 2021 Laneware Peripherals + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +/* + * ┌───┐ ┌───┬───┐ + * │K00│ │K01│K02│ + * └───┘ └───┴───┘ + * ┌───┬───┬───┬───┐ + * │K10│K11│K12│K13│ + * ├───┼───┼───┼───┤ + * │K20│K21│K22│K23│ + * ├───┼───┼───┼───┤ + * │K30│K31│K32│K33│ + * ├───┼───┼───┼───┤ + * │K40│K41│K42│K43│ + * ├───┼───┼───┼───┤ + * │K50│K51│K52│K53│ + * └───┴───┴───┴───┘ + */ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_macropad( + KC_MUTE, KC_F1, KC_F2, + KC_F3, KC_F4, KC_F5, KC_F6, + KC_F7, KC_F8, KC_F9, KC_F10, + KC_F11, KC_F12, KC_F13, KC_F14, + KC_F15, KC_F16, KC_F17, KC_F18, + KC_F19, KC_F20, KC_F21, KC_F22), + + [1] = LAYOUT_macropad( + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [2] = LAYOUT_macropad( + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), }; + + + diff --git a/keyboards/macro1/keymaps/southpaw/keymap.c b/keyboards/macro1/keymaps/southpaw/keymap.c new file mode 100644 index 0000000000..b8c6bfb339 --- /dev/null +++ b/keyboards/macro1/keymaps/southpaw/keymap.c @@ -0,0 +1,63 @@ + /* Copyright 2021 Laneware Peripherals + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +/* + * ┌───┐ ┌───┬───┐ + * │K00│ │K02│K03│ + * └───┘ └───┴───┘ + * ┌───┬───┬───┬───┐ + * │K10│K11│K12│K13│ + * ├───┼───┼───┼───┤ + * │K20│K21│K22│K23│ + * │ ├───┼───┼───┤ + * │ │K31│K32│K33│ + * ├───┼───┼───┼───┤ + * │K40│K41│K42│K43│ + * │ ├───┼───┴───┤ + * │ │K51│K52 │ + * └───┴───┴───────┘ + */ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_southpaw( + KC_MUTE, KC_MPLY, KC_BSPC, + KC_CALC, KC_KP_SLASH, KC_KP_ASTERISK, KC_KP_MINUS, + KC_KP_PLUS, KC_KP_7, KC_KP_8, KC_KP_9, + KC_KP_4, KC_KP_5, KC_KP_6, + KC_KP_ENTER, KC_KP_1, KC_KP_2, KC_KP_3, + KC_KP_DOT, KC_KP_0), + + [1] = LAYOUT_southpaw( + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS), + + [2] = LAYOUT_southpaw( + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS), }; + + + diff --git a/keyboards/macro1/keymaps/via/keymap.c b/keyboards/macro1/keymaps/via/keymap.c new file mode 100644 index 0000000000..f3e53a78e9 --- /dev/null +++ b/keyboards/macro1/keymaps/via/keymap.c @@ -0,0 +1,103 @@ + /* Copyright 2021 Laneware Peripherals + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +/* + * ┌───┐ ┌───┬───┐ + * │K00│ │K02│K03│ + * └───┘ └───┴───┘ + * ┌───┬───┬───┬───┐ + * │K10│K11│K12│K13│ + * ├───┼───┼───┼───┤ + * │K20│K21│K22│K23│ + * ├───┼───┼───┤ │ + * │K30│K31│K32│ │ + * ├───┼───┼───┼───┤ + * │K40│K41│K42│K43│ + * ├───┴───┼───┤ │ + * │K50 │K52│ │ + * └───────┴───┴───┘ + */ + + /* + * ┌───┐ ┌───┬───┐ + * │K00│ │K02│K03│ + * └───┘ └───┴───┘ + * ┌───┬───┬───┬───┐ + * │K10│K11│K12│K13│ + * ├───┼───┼───┼───┤ + * │K20│K21│K22│K23│ + * │ ├───┼───┼───┤ + * │ │K31│K32│K33│ + * ├───┼───┼───┼───┤ + * │K40│K41│K42│K43│ + * │ ├───┼───┴───┤ + * │ │K51│K52 │ + * └───┴───┴───────┘ + */ + +/* + * ┌───┐ ┌───┬───┐ + * │K00│ │K01│K02│ + * └───┘ └───┴───┘ + * ┌───┬───┬───┬───┐ + * │K10│K11│K12│K13│ + * ├───┼───┼───┼───┤ + * │K20│K21│K22│K23│ + * ├───┼───┼───┼───┤ + * │K30│K31│K32│K33│ + * ├───┼───┼───┼───┤ + * │K40│K41│K42│K43│ + * ├───┼───┼───┼───┤ + * │K50│K51│K52│K53│ + * └───┴───┴───┴───┘ + */ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_numpad( + KC_MUTE, KC_MPLY, KC_BSPC, + KC_CALC, KC_KP_SLASH, KC_KP_ASTERISK, KC_KP_MINUS, + KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_PLUS, + KC_KP_4, KC_KP_5, KC_KP_6, + KC_KP_1, KC_KP_2, KC_KP_3, KC_KP_ENTER, + KC_KP_0, KC_KP_DOT), + + [1] = LAYOUT_numpad( + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS), + + [2] = LAYOUT_numpad( + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS), + + [3] = LAYOUT_numpad( + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS), }; + diff --git a/keyboards/macro1/keymaps/via/rules.mk b/keyboards/macro1/keymaps/via/rules.mk new file mode 100644 index 0000000000..036bd6d1c3 --- /dev/null +++ b/keyboards/macro1/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes \ No newline at end of file diff --git a/keyboards/macro1/macro1.c b/keyboards/macro1/macro1.c new file mode 100644 index 0000000000..b470ed523f --- /dev/null +++ b/keyboards/macro1/macro1.c @@ -0,0 +1,29 @@ + /* Copyright 2021 Laneware Peripherals + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "macro1.h" + +bool encoder_update_user(uint8_t index, bool clockwise) { + if (index == 0) { /* First encoder */ + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } + return false; +} + diff --git a/keyboards/macro1/macro1.h b/keyboards/macro1/macro1.h new file mode 100644 index 0000000000..1066258050 --- /dev/null +++ b/keyboards/macro1/macro1.h @@ -0,0 +1,115 @@ + /* Copyright 2021 Laneware Peripherals + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +/* KEYMAP_numpad + * ┌───┐ ┌───┬───┐ + * │K00│ │K02│K03│ + * └───┘ └───┴───┘ + * ┌───┬───┬───┬───┐ + * │K10│K11│K12│K13│ + * ├───┼───┼───┼───┤ + * │K20│K21│K22│K23│ + * ├───┼───┼───┤ │ + * │K30│K31│K32│ │ + * ├───┼───┼───┼───┤ + * │K40│K41│K42│K43│ + * ├───┴───┼───┤ │ + * │K50 │K52│ │ + * └───────┴───┴───┘ + */ +#define LAYOUT_numpad( \ + K00, K02, K03, \ + K10, K11, K12, K13, \ + K20, K21, K22, K23, \ + K30, K31, K32, \ + K40, K41, K42, K43, \ + K50, K52 \ +) { \ + { K00, KC_NO, K02, K03 }, \ + { K10, K11, K12, K13 }, \ + { K20, K21, K22, K23 }, \ + { K30, K31, K32, KC_NO }, \ + { K40, K41, K42, K43 }, \ + { K50, KC_NO, K52, KC_NO } \ +} + +/* KEYMAP_southpaw + * ┌───┐ ┌───┬───┐ + * │K00│ │K02│K03│ + * └───┘ └───┴───┘ + * ┌───┬───┬───┬───┐ + * │K10│K11│K12│K13│ + * ├───┼───┼───┼───┤ + * │K20│K21│K22│K23│ + * │ ├───┼───┼───┤ + * │ │K31│K32│K33│ + * ├───┼───┼───┼───┤ + * │K40│K41│K42│K43│ + * │ ├───┼───┴───┤ + * │ │K51│K52 │ + * └───┴───┴───────┘ + */ +#define LAYOUT_southpaw( \ + K00, K02, K03, \ + K10, K11, K12, K13, \ + K20, K21, K22, K23, \ + K31, K32, K33, \ + K40, K41, K42, K43, \ + K51, K52 \ +) { \ + { K00, KC_NO, K02, K03 }, \ + { K10, K11, K12, K13 }, \ + { K20, K21, K22, K23 }, \ + { KC_NO, K31, K32, K33 }, \ + { K40, K41, K42, K43 }, \ + { KC_NO, K51, K52, KC_NO } \ +} + +/* KEYMAP_macropad + * ┌───┐ ┌───┬───┐ + * │K00│ │K01│K02│ + * └───┘ └───┴───┘ + * ┌───┬───┬───┬───┐ + * │K10│K11│K12│K13│ + * ├───┼───┼───┼───┤ + * │K20│K21│K22│K23│ + * ├───┼───┼───┼───┤ + * │K30│K31│K32│K33│ + * ├───┼───┼───┼───┤ + * │K40│K41│K42│K43│ + * ├───┼───┼───┼───┤ + * │K50│K51│K52│K53│ + * └───┴───┴───┴───┘ + */ +#define LAYOUT_macropad( \ + K00, K02, K03, \ + K10, K11, K12, K13, \ + K20, K21, K22, K23, \ + K30, K31, K32, K33, \ + K40, K41, K42, K43, \ + K50, K51, K52, K53 \ +) { \ + { K00, KC_NO, K02, K03 }, \ + { K10, K11, K12, K13 }, \ + { K20, K21, K22, K23 }, \ + { K30, K31, K32, K33 }, \ + { K40, K41, K42, K43 }, \ + { K50, K51, K52, K53 } \ +} diff --git a/keyboards/macro1/readme.md b/keyboards/macro1/readme.md new file mode 100644 index 0000000000..578a34e1c7 --- /dev/null +++ b/keyboards/macro1/readme.md @@ -0,0 +1,22 @@ +# Macro-1 + +![Macro-1](https://i.imgur.com/pnTgKuTh.jpeg) + +A versitile numpad/macropad (14x6) with a rotary encoder, made and sold by Laneware Peripherals. + +* Keyboard Maintainer: [Laneware Peripherals](https://github.com/laneware) +* Hardware Supported: Macro-1 +* Hardware Availability: [Laneware Peripherals](https://lanewareperipherals.com/), + +Make example for this keyboard (after setting up your build environment): + + make macro1:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the encoder and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB diff --git a/keyboards/macro1/rules.mk b/keyboards/macro1/rules.mk new file mode 100644 index 0000000000..6822271603 --- /dev/null +++ b/keyboards/macro1/rules.mk @@ -0,0 +1,22 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +ENCODER_ENABLE = yes \ No newline at end of file From 8b6c16ea1f5fa982f32560eade897dcf856fbbbd Mon Sep 17 00:00:00 2001 From: Marcus van Houdt Date: Wed, 22 Sep 2021 00:23:49 +0200 Subject: [PATCH 065/595] Add ability to use numpad digits for unicode mode UC_WIN (#14496) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Co-authored-by: Konstantin Đorđević --- .../process_keycode/process_unicode_common.c | 47 +++++++++++++++---- 1 file changed, 37 insertions(+), 10 deletions(-) diff --git a/quantum/process_keycode/process_unicode_common.c b/quantum/process_keycode/process_unicode_common.c index 46fcaaa86b..7853c22c5d 100644 --- a/quantum/process_keycode/process_unicode_common.c +++ b/quantum/process_keycode/process_unicode_common.c @@ -22,6 +22,7 @@ unicode_config_t unicode_config; uint8_t unicode_saved_mods; bool unicode_saved_caps_lock; +bool unicode_saved_num_lock; #if UNICODE_SELECTED_MODES != -1 static uint8_t selected[] = {UNICODE_SELECTED_MODES}; @@ -79,13 +80,14 @@ void persist_unicode_input_mode(void) { eeprom_update_byte(EECONFIG_UNICODEMODE, __attribute__((weak)) void unicode_input_start(void) { unicode_saved_caps_lock = host_keyboard_led_state().caps_lock; + unicode_saved_num_lock = host_keyboard_led_state().num_lock; // Note the order matters here! // Need to do this before we mess around with the mods, or else // UNICODE_KEY_LNX (which is usually Ctrl-Shift-U) might not work // correctly in the shifted case. if (unicode_config.input_mode == UC_LNX && unicode_saved_caps_lock) { - tap_code(KC_CAPS); + tap_code(KC_CAPSLOCK); } unicode_saved_mods = get_mods(); // Save current mods @@ -99,8 +101,12 @@ __attribute__((weak)) void unicode_input_start(void) { tap_code16(UNICODE_KEY_LNX); break; case UC_WIN: + // For increased reliability, use numpad keys for inputting digits + if (!unicode_saved_num_lock) { + tap_code(KC_NUMLOCK); + } register_code(KC_LALT); - tap_code(KC_PPLS); + tap_code(KC_KP_PLUS); break; case UC_WINC: tap_code(UNICODE_KEY_WINC); @@ -117,13 +123,16 @@ __attribute__((weak)) void unicode_input_finish(void) { unregister_code(UNICODE_KEY_MAC); break; case UC_LNX: - tap_code(KC_SPC); + tap_code(KC_SPACE); if (unicode_saved_caps_lock) { - tap_code(KC_CAPS); + tap_code(KC_CAPSLOCK); } break; case UC_WIN: unregister_code(KC_LALT); + if (!unicode_saved_num_lock) { + tap_code(KC_NUMLOCK); + } break; case UC_WINC: tap_code(KC_ENTER); @@ -139,26 +148,44 @@ __attribute__((weak)) void unicode_input_cancel(void) { unregister_code(UNICODE_KEY_MAC); break; case UC_LNX: - tap_code(KC_ESC); + tap_code(KC_ESCAPE); if (unicode_saved_caps_lock) { - tap_code(KC_CAPS); + tap_code(KC_CAPSLOCK); } break; case UC_WINC: - tap_code(KC_ESC); + tap_code(KC_ESCAPE); break; case UC_WIN: unregister_code(KC_LALT); + if (!unicode_saved_num_lock) { + tap_code(KC_NUMLOCK); + } break; } set_mods(unicode_saved_mods); // Reregister previously set mods } +// clang-format off + +static void send_nibble_wrapper(uint8_t digit) { + if (unicode_config.input_mode == UC_WIN) { + uint8_t kc = digit < 10 + ? KC_KP_1 + (10 + digit - 1) % 10 + : KC_A + (digit - 10); + tap_code(kc); + return; + } + send_nibble(digit); +} + +// clang-format on + void register_hex(uint16_t hex) { for (int i = 3; i >= 0; i--) { uint8_t digit = ((hex >> (i * 4)) & 0xF); - send_nibble(digit); + send_nibble_wrapper(digit); } } @@ -171,10 +198,10 @@ void register_hex32(uint32_t hex) { uint8_t digit = ((hex >> (i * 4)) & 0xF); if (digit == 0) { if (!onzerostart) { - send_nibble(digit); + send_nibble_wrapper(digit); } } else { - send_nibble(digit); + send_nibble_wrapper(digit); onzerostart = false; } } From bb754069e95237bec69cc23845e2515eea5f33e4 Mon Sep 17 00:00:00 2001 From: zhouqiong19840119 <82140728+zhouqiong19840119@users.noreply.github.com> Date: Wed, 22 Sep 2021 06:52:39 +0800 Subject: [PATCH 066/595] [Keyboard] smallkeyboard support (#12817) Co-authored-by: Ryan Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> Co-authored-by: Drashna Jaelre --- keyboards/smallkeyboard/config.h | 104 ++++++++++++++++++ keyboards/smallkeyboard/info.json | 17 +++ .../smallkeyboard/keymaps/default/keymap.c | 28 +++++ keyboards/smallkeyboard/keymaps/via/keymap.c | 28 +++++ keyboards/smallkeyboard/keymaps/via/rules.mk | 1 + keyboards/smallkeyboard/readme.md | 18 +++ keyboards/smallkeyboard/rules.mk | 26 +++++ keyboards/smallkeyboard/smallkeyboard.c | 49 +++++++++ keyboards/smallkeyboard/smallkeyboard.h | 26 +++++ 9 files changed, 297 insertions(+) create mode 100644 keyboards/smallkeyboard/config.h create mode 100644 keyboards/smallkeyboard/info.json create mode 100644 keyboards/smallkeyboard/keymaps/default/keymap.c create mode 100644 keyboards/smallkeyboard/keymaps/via/keymap.c create mode 100644 keyboards/smallkeyboard/keymaps/via/rules.mk create mode 100644 keyboards/smallkeyboard/readme.md create mode 100644 keyboards/smallkeyboard/rules.mk create mode 100644 keyboards/smallkeyboard/smallkeyboard.c create mode 100644 keyboards/smallkeyboard/smallkeyboard.h diff --git a/keyboards/smallkeyboard/config.h b/keyboards/smallkeyboard/config.h new file mode 100644 index 0000000000..689d53d54e --- /dev/null +++ b/keyboards/smallkeyboard/config.h @@ -0,0 +1,104 @@ +/* Copyright 2021 zhouqiong19840119 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + + +#pragma once + +/* USB Device descriptor parameter */ +#include "config_common.h" +#define VENDOR_ID 0x7A71 // "zq" = zhouqiong19840119 +#define PRODUCT_ID 0x736B // "sk" = smallkeyboard +#define DEVICE_VER 0x0001 +#define MANUFACTURER zhouqiong19840119 +#define PRODUCT smallkeyboard + +/* key matrix size */ +#define MATRIX_ROWS 2 +#define MATRIX_COLS 3 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS {C7, C6 } +#define MATRIX_COL_PINS {F7, F6, F5} +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION ROW2COL + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 3 + +/* disable these deprecated features by default */ +//#ifndef LINK_TIME_OPTIMIZATION_ENABLE +//# define NO_ACTION_MACRO +//# define NO_ACTION_FUNCTION +//#endif + +#ifdef RGB_MATRIX_ENABLE +# define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects +# define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended +# define RGB_MATRIX_KEYPRESSES +# define RGB_MATRIX_FRAMEBUFFER_EFFECTS +# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define DISABLE_RGB_MATRIX_BAND_SAT +# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define DISABLE_RGB_MATRIX_SPLASH +# define DISABLE_RGB_MATRIX_MULTISPLASH +# define DISABLE_RGB_MATRIX_SOLID_SPLASH +# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +# define DISABLE_RGB_MATRIX_DIGITAL_RAIN + +// This is a 7-bit address, that gets left-shifted and bit 0 +// set to 0 for write, 1 for read (as per I2C protocol) +// The address will vary depending on your wiring: +// 0b1110100 AD <-> GND +// 0b1110111 AD <-> VCC +// 0b1110101 AD <-> SCL +// 0b1110110 AD <-> SDA +#define DRIVER_ADDR_1 0b1110100 +//#define DRIVER_ADDR_2 0b1110110 + +#define DRIVER_COUNT 1 +#define DRIVER_1_LED_TOTAL 6 +//#define DRIVER_1_LED_TOTAL 25 +//#define DRIVER_2_LED_TOTAL 24 +//#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) +#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL +#endif +//#define RGB_DI_PIN B7 +//#ifdef RGB_DI_PIN +//#define RGBLIGHT_ANIMATIONS +//#define RGBLED_NUM 8 +//#define RGBLIGHT_HUE_STEP 5 +//#define RGBLIGHT_SAT_STEP 5 +//#define RGBLIGHT_VAL_STEP 5 +//#define RGBLIGHT_SLEEP +//#endif diff --git a/keyboards/smallkeyboard/info.json b/keyboards/smallkeyboard/info.json new file mode 100644 index 0000000000..8d1d642c10 --- /dev/null +++ b/keyboards/smallkeyboard/info.json @@ -0,0 +1,17 @@ +{ + "keyboard_name": "smallkeyboard", + "url": "", + "maintainer": "zhouqiong19840119", + "layouts": { + "LAYOUT_ortho_2x3": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":0, "y":1}, + {"x":1, "y":1}, + {"x":2, "y":1} + ] + } + } +} diff --git a/keyboards/smallkeyboard/keymaps/default/keymap.c b/keyboards/smallkeyboard/keymaps/default/keymap.c new file mode 100644 index 0000000000..9ab00be05c --- /dev/null +++ b/keyboards/smallkeyboard/keymaps/default/keymap.c @@ -0,0 +1,28 @@ +/* Copyright 2021 zhouqiong19840119 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_ortho_2x3( + KC_P1, KC_P2, MO(1), + KC_P3, KC_P4, KC_P3), + [1] = LAYOUT_ortho_2x3( + RGB_TOG, RGB_MOD, MO(1), + AU_ON, AU_OFF, MI_ON), + [2] = LAYOUT_ortho_2x3( + KC_P4, KC_P5, MO(1), + KC_P1, KC_P2, KC_P3), +}; diff --git a/keyboards/smallkeyboard/keymaps/via/keymap.c b/keyboards/smallkeyboard/keymaps/via/keymap.c new file mode 100644 index 0000000000..9ab00be05c --- /dev/null +++ b/keyboards/smallkeyboard/keymaps/via/keymap.c @@ -0,0 +1,28 @@ +/* Copyright 2021 zhouqiong19840119 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_ortho_2x3( + KC_P1, KC_P2, MO(1), + KC_P3, KC_P4, KC_P3), + [1] = LAYOUT_ortho_2x3( + RGB_TOG, RGB_MOD, MO(1), + AU_ON, AU_OFF, MI_ON), + [2] = LAYOUT_ortho_2x3( + KC_P4, KC_P5, MO(1), + KC_P1, KC_P2, KC_P3), +}; diff --git a/keyboards/smallkeyboard/keymaps/via/rules.mk b/keyboards/smallkeyboard/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/smallkeyboard/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/smallkeyboard/readme.md b/keyboards/smallkeyboard/readme.md new file mode 100644 index 0000000000..54b4bcb532 --- /dev/null +++ b/keyboards/smallkeyboard/readme.md @@ -0,0 +1,18 @@ +# SMALLKEYBOARD + +![](https://github.com/zhouqiong19840119/MacroKeyboard-little/blob/main/Small%20(1).jpg) + +* Keyboard Maintainer: [zhouqiong19840119](https://github.com/zhouqiong19840119) +* Hardware Availability: + +Make example for this keyboard (after setting up your build environment): + + make smallkeyboard:default + +Flashing example for this keyboard: + + make smallkeyboard:default:flash + +To reset the board into bootloader mode, hold the key at the top left of the keyboard while connecting the USB cable (also erases persistent settings). + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/smallkeyboard/rules.mk b/keyboards/smallkeyboard/rules.mk new file mode 100644 index 0000000000..54c776b6ec --- /dev/null +++ b/keyboards/smallkeyboard/rules.mk @@ -0,0 +1,26 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output + +RGB_MATRIX_ENABLE = yes +RGB_MATRIX_DRIVER = IS31FL3731 + +RGB_MATRIX_SUPPORTED = yes diff --git a/keyboards/smallkeyboard/smallkeyboard.c b/keyboards/smallkeyboard/smallkeyboard.c new file mode 100644 index 0000000000..4da85feff1 --- /dev/null +++ b/keyboards/smallkeyboard/smallkeyboard.c @@ -0,0 +1,49 @@ +/* Copyright 2021 zhouqiong19840119 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "smallkeyboard.h" + +#ifdef RGB_MATRIX_ENABLE + +const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { +/* Refer to IS31 manual for these locations + * driver + * | R location + * | | G location + * | | | B location + * | | | | */ + {0, C1_3, C2_3, C3_3},// BL1 + {0, C1_4, C2_4, C3_4},// BL2 + {0, C1_5, C2_5, C3_5},// BL3 + {0, C1_11, C2_11, C3_11},// BL4 + {0, C1_12, C2_12, C3_12},// BL5 + {0, C1_13, C2_13, C3_13},// BL6 +}; + +led_config_t g_led_config = { + { + { 0, 1, 2}, + { 3, 4, 5}, + }, + { + { 48, 32},{ 48, 48},{ 64, 48}, + { 80, 16},{ 64, 32},{ 80, 32} + }, + { + 4, 4, 4, + 1, 1, 4 + } +}; +#endif diff --git a/keyboards/smallkeyboard/smallkeyboard.h b/keyboards/smallkeyboard/smallkeyboard.h new file mode 100644 index 0000000000..7741772be5 --- /dev/null +++ b/keyboards/smallkeyboard/smallkeyboard.h @@ -0,0 +1,26 @@ +/* Copyright 2021 zhouqiong198401189 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" + +#define LAYOUT_ortho_2x3( \ + K00, K01, K02,\ + K10, K11, K12 \ +) { \ + { K00, K01, K02 }, \ + { K10, K11, K12 } \ +} From 45f88af4a12938072f58d89769145c46a30fb38c Mon Sep 17 00:00:00 2001 From: Dasky <32983009+daskygit@users.noreply.github.com> Date: Wed, 22 Sep 2021 00:40:19 +0100 Subject: [PATCH 067/595] [Docs] update suspend_*_user examples (#14542) --- docs/custom_quantum_functions.md | 4 ++-- docs/ja/custom_quantum_functions.md | 4 ++-- docs/zh-cn/custom_quantum_functions.md | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-) diff --git a/docs/custom_quantum_functions.md b/docs/custom_quantum_functions.md index b0ed0f588d..463366ff76 100644 --- a/docs/custom_quantum_functions.md +++ b/docs/custom_quantum_functions.md @@ -214,11 +214,11 @@ This is controlled by two functions: `suspend_power_down_*` and `suspend_wakeup_ ```c void suspend_power_down_user(void) { - rgb_matrix_set_suspend_state(true); + // code will run multiple times while keyboard is suspended } void suspend_wakeup_init_user(void) { - rgb_matrix_set_suspend_state(false); + // code will run on keyboard wakeup } ``` diff --git a/docs/ja/custom_quantum_functions.md b/docs/ja/custom_quantum_functions.md index c348f85566..bd3f15a5fd 100644 --- a/docs/ja/custom_quantum_functions.md +++ b/docs/ja/custom_quantum_functions.md @@ -211,11 +211,11 @@ void keyboard_post_init_user(void) { ```c void suspend_power_down_user(void) { - rgb_matrix_set_suspend_state(true); + // code will run multiple times while keyboard is suspended } void suspend_wakeup_init_user(void) { - rgb_matrix_set_suspend_state(false); + // code will run on keyboard wakeup } ``` diff --git a/docs/zh-cn/custom_quantum_functions.md b/docs/zh-cn/custom_quantum_functions.md index 44cb5cf76d..1ae996e392 100644 --- a/docs/zh-cn/custom_quantum_functions.md +++ b/docs/zh-cn/custom_quantum_functions.md @@ -275,11 +275,11 @@ void keyboard_post_init_user(void) { ```c void suspend_power_down_user(void) { - rgb_matrix_set_suspend_state(true); + // code will run multiple times while keyboard is suspended } void suspend_wakeup_init_user(void) { - rgb_matrix_set_suspend_state(false); + // code will run on keyboard wakeup } ``` From 2e670644fdd6f2c0d826c98c76690d6166cfd792 Mon Sep 17 00:00:00 2001 From: Michael Stapelberg Date: Wed, 22 Sep 2021 01:48:41 +0200 Subject: [PATCH 068/595] [Keyboard] Set USB max power consumption of kint* controllers to 100mA (#14546) --- keyboards/kinesis/kint2pp/config.h | 4 ++++ keyboards/kinesis/kint36/config.h | 4 ++++ keyboards/kinesis/kint41/config.h | 4 ++++ 3 files changed, 12 insertions(+) diff --git a/keyboards/kinesis/kint2pp/config.h b/keyboards/kinesis/kint2pp/config.h index a5530bc2f7..4191446e68 100644 --- a/keyboards/kinesis/kint2pp/config.h +++ b/keyboards/kinesis/kint2pp/config.h @@ -44,3 +44,7 @@ // Reduce input latency by lowering the USB polling interval // from its 10ms default to the 1ms minimum that USB 1.x (Full Speed) allows: #define USB_POLLING_INTERVAL_MS 1 + +// The Teensy 2++ consumes about 60 mA of current at its full speed of 16 MHz as +// per https://www.pjrc.com/teensy/low_power.html +#define USB_MAX_POWER_CONSUMPTION 100 diff --git a/keyboards/kinesis/kint36/config.h b/keyboards/kinesis/kint36/config.h index ab34daa7b8..3738629ea7 100644 --- a/keyboards/kinesis/kint36/config.h +++ b/keyboards/kinesis/kint36/config.h @@ -63,6 +63,10 @@ // from its 10ms default to the 1ms minimum that USB 1.x (Full Speed) allows: #define USB_POLLING_INTERVAL_MS 1 +// The Teensy 3.6 consumes about 80 mA of current at its full speed of 180 MHz: +// https://forum.pjrc.com/threads/47256-What-is-the-power-consumption-of-the-Teensy-3-6 +#define USB_MAX_POWER_CONSUMPTION 100 + #define LED_PIN_ON_STATE 0 #define LED_NUM_LOCK_PIN A14 #define LED_CAPS_LOCK_PIN C7 diff --git a/keyboards/kinesis/kint41/config.h b/keyboards/kinesis/kint41/config.h index 349d3ee364..7d87b8dd76 100644 --- a/keyboards/kinesis/kint41/config.h +++ b/keyboards/kinesis/kint41/config.h @@ -90,6 +90,10 @@ // from its 10ms default to the 125μs minimum that USB 2.x (High Speed) allows: #define USB_POLLING_INTERVAL_MS 1 +// The Teensy 4.1 consumes about 100 mA of current at its full speed of 600 MHz +// as per https://www.pjrc.com/store/teensy41.html +#define USB_MAX_POWER_CONSUMPTION 100 + /* We use the i.MX RT1060 high-speed GPIOs (GPIO6-9) which are connected to the * AHB bus (AHB_CLK_ROOT), which runs at the same speed as the ARM Core Clock, * i.e. 600 MHz. See MIMXRT1062, page 949, 12.1 Chip-specific GPIO information. From 033a318bdfafa8f90fc259e91bbebf10bc6bc7ca Mon Sep 17 00:00:00 2001 From: Salicylic-acid3 <46864619+Salicylic-acid3@users.noreply.github.com> Date: Wed, 22 Sep 2021 09:12:57 +0900 Subject: [PATCH 069/595] [Keyboard] Addition of VIA keymap and a few fixes for naked48 (#14177) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- keyboards/naked48/config.h | 3 +- keyboards/naked48/keymaps/default/rules.mk | 1 + keyboards/naked48/keymaps/salicylic/rules.mk | 1 + keyboards/naked48/keymaps/via/config.h | 22 ++++++ keyboards/naked48/keymaps/via/keymap.c | 71 +++++++++++++++++++ keyboards/naked48/keymaps/via/rules.mk | 3 + .../naked48/keymaps/via_rgb_matrix/config.h | 44 ++++++++++++ .../naked48/keymaps/via_rgb_matrix/keymap.c | 71 +++++++++++++++++++ .../naked48/keymaps/via_rgb_matrix/rules.mk | 5 ++ keyboards/naked48/naked48.c | 20 ++++-- keyboards/naked48/naked48.h | 17 +++++ keyboards/naked48/rev1/config.h | 7 +- keyboards/naked48/rev1/rev1.c | 17 +++++ keyboards/naked48/rev1/rev1.h | 17 +++++ keyboards/naked48/rules.mk | 21 +++--- 15 files changed, 298 insertions(+), 22 deletions(-) create mode 100644 keyboards/naked48/keymaps/default/rules.mk create mode 100644 keyboards/naked48/keymaps/via/config.h create mode 100644 keyboards/naked48/keymaps/via/keymap.c create mode 100644 keyboards/naked48/keymaps/via/rules.mk create mode 100644 keyboards/naked48/keymaps/via_rgb_matrix/config.h create mode 100644 keyboards/naked48/keymaps/via_rgb_matrix/keymap.c create mode 100644 keyboards/naked48/keymaps/via_rgb_matrix/rules.mk diff --git a/keyboards/naked48/config.h b/keyboards/naked48/config.h index cfb6bf4ffc..fae55d19f7 100644 --- a/keyboards/naked48/config.h +++ b/keyboards/naked48/config.h @@ -1,6 +1,5 @@ /* -Copyright 2012 Jun Wako -Copyright 2015 Jack Humbert +Copyright 2021 Salicylic_Acid This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/keyboards/naked48/keymaps/default/rules.mk b/keyboards/naked48/keymaps/default/rules.mk new file mode 100644 index 0000000000..d29d9074a0 --- /dev/null +++ b/keyboards/naked48/keymaps/default/rules.mk @@ -0,0 +1 @@ +SPLIT_KEYBOARD = no diff --git a/keyboards/naked48/keymaps/salicylic/rules.mk b/keyboards/naked48/keymaps/salicylic/rules.mk index 370f36140f..bdf3488cc1 100644 --- a/keyboards/naked48/keymaps/salicylic/rules.mk +++ b/keyboards/naked48/keymaps/salicylic/rules.mk @@ -1,3 +1,4 @@ RGBLIGHT_ENABLE = no RGB_MATRIX_ENABLE = yes +SPLIT_KEYBOARD = no diff --git a/keyboards/naked48/keymaps/via/config.h b/keyboards/naked48/keymaps/via/config.h new file mode 100644 index 0000000000..fd96baa819 --- /dev/null +++ b/keyboards/naked48/keymaps/via/config.h @@ -0,0 +1,22 @@ +/* Copyright 2021 Salicylic_acid3 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +/* Select hand configuration */ + +#define TAPPING_FORCE_HOLD +#define TAPPING_TERM 180 diff --git a/keyboards/naked48/keymaps/via/keymap.c b/keyboards/naked48/keymaps/via/keymap.c new file mode 100644 index 0000000000..8d0c6f901b --- /dev/null +++ b/keyboards/naked48/keymaps/via/keymap.c @@ -0,0 +1,71 @@ +/* +Copyright 2021 Salicylic_Acid + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( + //,-----------------------------------------------------| |-----------------------------------------------------. + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, + //|--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + MO(3),KC_LCTRL, KC_LALT, KC_LGUI, MO(1), KC_SPC, KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT + //`------------------------------------------------------------------------------------------------------------' + ), + + + [1] = LAYOUT( + //,-----------------------------------------------------| |-----------------------------------------------------. + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR,KC_LPRN, KC_RPRN, KC_DEL, + //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, + //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______,_______,_______, + //|--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY + //`------------------------------------------------------------------------------------------------------------' + ), + + + [2] = LAYOUT( + //,-----------------------------------------------------| |-----------------------------------------------------. + KC_TILD, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, + //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, + //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, + //|--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + //`------------------------------------------------------------------------------------------------------------' + ), + + + [3] = LAYOUT( /* Base */ + //,-----------------------------------------------------| |-----------------------------------------------------. + _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, + //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| + _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RGB_TOG, RGB_MOD, XXXXXXX,LCA(KC_DEL),LALT(KC_PSCR),KC_PSCR, + //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| + _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RGB_VAD, RGB_VAI, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, + //|--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + _______, _______, _______, _______, _______, RESET, RESET, _______, _______, _______, _______, _______ + //`------------------------------------------------------------------------------------------------------------' + ) +}; diff --git a/keyboards/naked48/keymaps/via/rules.mk b/keyboards/naked48/keymaps/via/rules.mk new file mode 100644 index 0000000000..8712957dfa --- /dev/null +++ b/keyboards/naked48/keymaps/via/rules.mk @@ -0,0 +1,3 @@ +VIA_ENABLE = yes + +SPLIT_KEYBOARD = no diff --git a/keyboards/naked48/keymaps/via_rgb_matrix/config.h b/keyboards/naked48/keymaps/via_rgb_matrix/config.h new file mode 100644 index 0000000000..0920b2bc35 --- /dev/null +++ b/keyboards/naked48/keymaps/via_rgb_matrix/config.h @@ -0,0 +1,44 @@ +/* Copyright 2018 Salicylic_acid3 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +/* Select hand configuration */ + +#define TAPPING_FORCE_HOLD +#define TAPPING_TERM 180 + +#ifdef RGBLED_NUM + #undef RGBLED_NUM +#endif + +#define DRIVER_LED_TOTAL 48 + +#ifdef RGB_MATRIX_ENABLE +# define RGB_MATRIX_KEYPRESSES // reacts to keypresses +// # define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses) +// # define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects +# define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended +// # define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness) +// # define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) +// # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 +# define RGB_MATRIX_HUE_STEP 8 +# define RGB_MATRIX_SAT_STEP 8 +# define RGB_MATRIX_LIMIT_VAL 50 +# define RGB_MATRIX_VAL_STEP 5 +# define RGB_MATRIX_SPD_STEP 10 +#endif + diff --git a/keyboards/naked48/keymaps/via_rgb_matrix/keymap.c b/keyboards/naked48/keymaps/via_rgb_matrix/keymap.c new file mode 100644 index 0000000000..8d0c6f901b --- /dev/null +++ b/keyboards/naked48/keymaps/via_rgb_matrix/keymap.c @@ -0,0 +1,71 @@ +/* +Copyright 2021 Salicylic_Acid + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( + //,-----------------------------------------------------| |-----------------------------------------------------. + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, + //|--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + MO(3),KC_LCTRL, KC_LALT, KC_LGUI, MO(1), KC_SPC, KC_SPC, MO(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT + //`------------------------------------------------------------------------------------------------------------' + ), + + + [1] = LAYOUT( + //,-----------------------------------------------------| |-----------------------------------------------------. + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR,KC_LPRN, KC_RPRN, KC_DEL, + //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, + //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______,_______,_______, + //|--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY + //`------------------------------------------------------------------------------------------------------------' + ), + + + [2] = LAYOUT( + //,-----------------------------------------------------| |-----------------------------------------------------. + KC_TILD, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, + //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, + //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, + //|--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + //`------------------------------------------------------------------------------------------------------------' + ), + + + [3] = LAYOUT( /* Base */ + //,-----------------------------------------------------| |-----------------------------------------------------. + _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, + //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| + _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RGB_TOG, RGB_MOD, XXXXXXX,LCA(KC_DEL),LALT(KC_PSCR),KC_PSCR, + //|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------| + _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RGB_VAD, RGB_VAI, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, + //|--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------| + _______, _______, _______, _______, _______, RESET, RESET, _______, _______, _______, _______, _______ + //`------------------------------------------------------------------------------------------------------------' + ) +}; diff --git a/keyboards/naked48/keymaps/via_rgb_matrix/rules.mk b/keyboards/naked48/keymaps/via_rgb_matrix/rules.mk new file mode 100644 index 0000000000..49bb80ca31 --- /dev/null +++ b/keyboards/naked48/keymaps/via_rgb_matrix/rules.mk @@ -0,0 +1,5 @@ +RGBLIGHT_ENABLE = no +RGB_MATRIX_ENABLE = yes +VIA_ENABLE = yes + +SPLIT_KEYBOARD = no diff --git a/keyboards/naked48/naked48.c b/keyboards/naked48/naked48.c index dc516e98f4..c2a10ed3e6 100644 --- a/keyboards/naked48/naked48.c +++ b/keyboards/naked48/naked48.c @@ -1,6 +1,18 @@ -#include "naked48.h" +/* +Copyright 2021 Salicylic_Acid + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. -// Optional override functions below. -// You can leave any or all of these undefined. -// These are only required if you want to perform custom actions. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include "naked48.h" diff --git a/keyboards/naked48/naked48.h b/keyboards/naked48/naked48.h index 1c715eb24a..e210cf0f57 100644 --- a/keyboards/naked48/naked48.h +++ b/keyboards/naked48/naked48.h @@ -1,3 +1,20 @@ +/* +Copyright 2021 Salicylic_Acid + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + #pragma once #include "quantum.h" diff --git a/keyboards/naked48/rev1/config.h b/keyboards/naked48/rev1/config.h index f74ce8f7ad..b79384a48a 100644 --- a/keyboards/naked48/rev1/config.h +++ b/keyboards/naked48/rev1/config.h @@ -1,6 +1,5 @@ /* -Copyright 2012 Jun Wako -Copyright 2015 Jack Humbert +Copyright 2021 Salicylic_Acid This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -19,8 +18,8 @@ along with this program. If not, see . #pragma once /* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x3060 +#define VENDOR_ID 0x04D8 +#define PRODUCT_ID 0xE8BA #define DEVICE_VER 0x0001 #define MANUFACTURER Salicylic_Acid #define PRODUCT naked48 diff --git a/keyboards/naked48/rev1/rev1.c b/keyboards/naked48/rev1/rev1.c index 411f2900a2..0129b6c1a3 100644 --- a/keyboards/naked48/rev1/rev1.c +++ b/keyboards/naked48/rev1/rev1.c @@ -1,3 +1,20 @@ +/* +Copyright 2021 Salicylic_Acid + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + #include "naked48.h" #ifdef RGB_MATRIX_ENABLE diff --git a/keyboards/naked48/rev1/rev1.h b/keyboards/naked48/rev1/rev1.h index de58f8f924..eee5c4185f 100644 --- a/keyboards/naked48/rev1/rev1.h +++ b/keyboards/naked48/rev1/rev1.h @@ -1,3 +1,20 @@ +/* +Copyright 2021 Salicylic_Acid + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + #pragma once #include "naked48.h" diff --git a/keyboards/naked48/rules.mk b/keyboards/naked48/rules.mk index df910fda57..c7b5b7e81c 100644 --- a/keyboards/naked48/rules.mk +++ b/keyboards/naked48/rules.mk @@ -5,23 +5,20 @@ MCU = atmega32u4 BOOTLOADER = caterina # Build Options -# change to "no" to disable the options, or define them in the Makefile in -# the appropriate keymap folder that will get included automatically +# change yes to no to disable # -BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = no # Mouse keys +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration -NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode -RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. -OLED_ENABLE = no -# USE_I2C = yes +COMMAND_ENABLE = no # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output RGB_MATRIX_ENABLE = no RGB_MATRIX_DRIVER = WS2812 From 208ea0e18cc6725c173e106a88528fb0576f3ce6 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Tue, 21 Sep 2021 21:16:19 -0700 Subject: [PATCH 070/595] [Keyboard] smallkeyboard fix of rgb matrix config (#14548) --- keyboards/smallkeyboard/smallkeyboard.c | 56 ++++++++++++------------- 1 file changed, 28 insertions(+), 28 deletions(-) diff --git a/keyboards/smallkeyboard/smallkeyboard.c b/keyboards/smallkeyboard/smallkeyboard.c index 4da85feff1..f89a6d32b3 100644 --- a/keyboards/smallkeyboard/smallkeyboard.c +++ b/keyboards/smallkeyboard/smallkeyboard.c @@ -1,35 +1,35 @@ /* Copyright 2021 zhouqiong19840119 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ #include "smallkeyboard.h" #ifdef RGB_MATRIX_ENABLE -const is31_led g_is31_leds[DRIVER_LED_TOTAL] = { -/* Refer to IS31 manual for these locations - * driver - * | R location - * | | G location - * | | | B location - * | | | | */ - {0, C1_3, C2_3, C3_3},// BL1 - {0, C1_4, C2_4, C3_4},// BL2 - {0, C1_5, C2_5, C3_5},// BL3 - {0, C1_11, C2_11, C3_11},// BL4 - {0, C1_12, C2_12, C3_12},// BL5 - {0, C1_13, C2_13, C3_13},// BL6 +const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { + /* Refer to IS31 manual for these locations + * driver + * | R location + * | | G location + * | | | B location + * | | | | */ + {0, C1_3, C2_3, C3_3}, // BL1 + {0, C1_4, C2_4, C3_4}, // BL2 + {0, C1_5, C2_5, C3_5}, // BL3 + {0, C1_11, C2_11, C3_11}, // BL4 + {0, C1_12, C2_12, C3_12}, // BL5 + {0, C1_13, C2_13, C3_13}, // BL6 }; led_config_t g_led_config = { @@ -42,7 +42,7 @@ led_config_t g_led_config = { { 80, 16},{ 64, 32},{ 80, 32} }, { - 4, 4, 4, + 4, 4, 4, 1, 1, 4 } }; From 43e88f34aa2587b16ca3f344ae7c40e2dcb5b622 Mon Sep 17 00:00:00 2001 From: James Smith Date: Wed, 22 Sep 2021 00:18:25 -0400 Subject: [PATCH 071/595] [Keyboard] add ein_60 (#14398) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- keyboards/ein_60/config.h | 98 ++++++++ keyboards/ein_60/ein_60.c | 120 +++++++++ keyboards/ein_60/ein_60.h | 38 +++ keyboards/ein_60/glcdfont.c | 233 ++++++++++++++++++ keyboards/ein_60/keymaps/default/keymap.c | 208 ++++++++++++++++ keyboards/ein_60/keymaps/default/readme.md | 3 + keyboards/ein_60/keymaps/default/rules.mk | 4 + keyboards/ein_60/keymaps/klackygears/config.h | 28 +++ keyboards/ein_60/keymaps/klackygears/keymap.c | 176 +++++++++++++ .../ein_60/keymaps/klackygears/readme.md | 1 + keyboards/ein_60/keymaps/klackygears/rules.mk | 8 + keyboards/ein_60/keymaps/ledtest/keymap.c | 207 ++++++++++++++++ keyboards/ein_60/keymaps/ledtest/readme.md | 1 + keyboards/ein_60/keymaps/ledtest/rules.mk | 4 + keyboards/ein_60/readme.md | 27 ++ keyboards/ein_60/rules.mk | 26 ++ 16 files changed, 1182 insertions(+) create mode 100644 keyboards/ein_60/config.h create mode 100644 keyboards/ein_60/ein_60.c create mode 100644 keyboards/ein_60/ein_60.h create mode 100644 keyboards/ein_60/glcdfont.c create mode 100644 keyboards/ein_60/keymaps/default/keymap.c create mode 100644 keyboards/ein_60/keymaps/default/readme.md create mode 100644 keyboards/ein_60/keymaps/default/rules.mk create mode 100644 keyboards/ein_60/keymaps/klackygears/config.h create mode 100644 keyboards/ein_60/keymaps/klackygears/keymap.c create mode 100644 keyboards/ein_60/keymaps/klackygears/readme.md create mode 100644 keyboards/ein_60/keymaps/klackygears/rules.mk create mode 100644 keyboards/ein_60/keymaps/ledtest/keymap.c create mode 100644 keyboards/ein_60/keymaps/ledtest/readme.md create mode 100644 keyboards/ein_60/keymaps/ledtest/rules.mk create mode 100644 keyboards/ein_60/readme.md create mode 100644 keyboards/ein_60/rules.mk diff --git a/keyboards/ein_60/config.h b/keyboards/ein_60/config.h new file mode 100644 index 0000000000..c701f1f6d6 --- /dev/null +++ b/keyboards/ein_60/config.h @@ -0,0 +1,98 @@ +/* +Copyright 2021 klackygears + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4A53 +#define PRODUCT_ID 0x0003 +#define DEVICE_VER 0x0001 +#define MANUFACTURER klackygears +#define PRODUCT EIN_60 + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 13 + +#define MATRIX_ROW_PINS { F1, F2, F3, F4 } +#define MATRIX_COL_PINS { A3, A2, A1, A0, F6, F5, F0, E0, E1, C0, C1, C2, C3 } + +#define DIODE_DIRECTION COL2ROW + +#ifdef ENCODER_ENABLE +# define ENCODERS_PAD_A { B0, C5 } +# define ENCODERS_PAD_B { E3, C4 } +# define ENCODER_RESOLUTIONS { 4, 4 } +#endif + +#ifdef OLED_ENABLE +# define OLED_DISPLAY_128X64 +# define OLED_TIMEOUT 450000 +# define OLED_FONT_H "keyboards/ein_60/glcdfont.c" +#endif + +#ifdef AUDIO_ENABLE +# define AUDIO_PIN C6 +# define AUDIO_CLICKY +# define AUDIO_DAC_SAMPLE_MAX 4095U +#endif + +#define RGB_DI_PIN E7 +#ifdef RGB_DI_PIN +# define RGBLED_NUM 38 +# define RGBLIGHT_HUE_STEP 4 +# define RGBLIGHT_SAT_STEP 8 +# define RGBLIGHT_VAL_STEP 8 +# define RGBLIGHT_LIMIT_VAL 200 /* The maximum brightness level */ +# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +# define RGBLIGHT_EFFECT_BREATHING +# define RGBLIGHT_EFFECT_RAINBOW_MOOD +# define RGBLIGHT_EFFECT_RAINBOW_SWIRL +# define RGBLIGHT_EFFECT_SNAKE +# define RGBLIGHT_EFFECT_KNIGHT +# define RGBLIGHT_EFFECT_CHRISTMAS +# define RGBLIGHT_EFFECT_STATIC_GRADIENT +# define RGBLIGHT_EFFECT_RGB_TEST +# define RGBLIGHT_EFFECT_ALTERNATING +# define RGBLIGHT_EFFECT_TWINKLE +// /*== customize breathing effect ==*/ +// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +// #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +// /*==== use exp() and sin() ====*/ +// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +#endif + +#ifdef RGB_MATRIX_ENABLE +# define DRIVER_LED_TOTAL 38 +# define RGB_MATRIX_LED_FLUSH_LIMIT 16 +# define RGB_MATRIX_STARTUP_VAL 150 +# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE diff --git a/keyboards/ein_60/ein_60.c b/keyboards/ein_60/ein_60.c new file mode 100644 index 0000000000..e9431edefb --- /dev/null +++ b/keyboards/ein_60/ein_60.c @@ -0,0 +1,120 @@ +/* Copyright 2021 klackygears + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "ein_60.h" + +#ifdef RGB_MATRIX_ENABLE + + // Logical Layout + // Columns + // 0 1 2 3 4 5 6 7 8 9 10 11 12 13 + // ROWS + // 37 0 1 2 3 4 5 6 7 8 9 10 11 12 0 + // 36 13 1 + // 35 14 2 + // 34 15 3 + // 33 16 3 + // 32 17 4 + // 31 30 29 28 27 26 25 24 23 22 21 20 19 18 5 + +led_config_t g_led_config = { { + { 36, 1, 2, 3, 4, 5, 5, 6, 7, 8, 9, 10, 13 }, + { 34, 1, 2, 3, 4, 5, NO_LED, 6, 7, 8, 9, 10, 15 }, + { 33, 30, 29, 28, 27, 26, NO_LED, 23, 22, 21, 20, 19, 16 }, + { 32, 30, 29, 28, 27, 26, 24, 23, 22, 21, 20, 19, 17 } +}, { + { 30, 0 }, { 45, 0 }, { 60, 0 }, { 75, 0 }, { 90, 0 }, { 105, 0 }, { 119, 0 }, { 134, 0 }, { 149, 0 }, { 164, 0 }, { 179, 0 }, { 194, 0 }, { 209, 0 }, { 224, 11 }, + { 224, 21 }, { 224, 32 }, { 224, 43 }, { 224, 53 }, { 209, 64 }, { 194, 64 }, { 179, 64 }, { 164, 64 }, { 149, 64 }, { 134, 64 }, { 119, 64 }, { 105, 64 }, { 90, 64 }, + { 75, 64 }, { 60, 64 }, { 45, 64 }, { 30, 64 }, { 15, 64 }, { 0, 53 }, { 0, 43 }, { 0, 32 }, { 0, 21 }, { 0, 11 }, { 15, 0 }, +}, { + 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, + 2, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 2, +} }; +#endif + +#ifdef AUDIO_ENABLE +const uint8_t music_map[MATRIX_ROWS][MATRIX_COLS] = LAYOUT( + 30, 31, 32, 33, 34, 35, 35, 36, 37, 38, 39, 40, 41, + 18, 9, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, + 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 +); +#endif + +#ifdef OLED_ENABLE +__attribute__((weak)) void oled_task_user(void) { + // Host Keyboard Layer Status + oled_write_P(PSTR("Layer: "), false); + switch (get_highest_layer(layer_state)) { + case 0: + oled_write_P(PSTR("Default\n"), false); + break; + case 1: + oled_write_P(PSTR("Lower\n"), false); + break; + case 2: + oled_write_P(PSTR("Raise\n"), false); + break; + case 3: + oled_write_P(PSTR("Adjust\n"), false); + break; + case 4: + oled_write_P(PSTR("FN\n"), false); + break; + default: + // Or use the write_ln shortcut over adding '\n' to the end of your string + oled_write_ln_P(PSTR("Undefined"), false); + } + + + // Host Keyboard LED Status + led_t led_state = host_keyboard_led_state(); + oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false); + oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false); + oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false); + + oled_set_cursor(1,2); + oled_advance_page(true); + static const char PROGMEM ein60_logo[] = { + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,255,255, 11,251,139,139,139,139,139,139,139,139,139,139,139, 11, 15, 0,240,240, 16,240, 0,240,240, 16,240,224,192,128, 0, 0, 0, 0,240, 16,240, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,254,255, 11,251,139,139,139,139,139,139,139,139,139,139,139,143,128, 0, 0, 0, 0,254,255, 11,251, 11, 11, 11, 11,139,203,235,123,187,219,235,251,255, 7,252, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,255,255, 4,253,197,197,197,197,197,197,197,197,197,197,199,192,192, 0,255,255, 0,255, 0,255,255, 0,254, 13, 27, 55,111,222,188,120,255, 0,255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,255,255, 0,255,197,197,197,197,197,197,197,197,197,197,253,253,255,131,254, 0, 0,255,255, 0,255,184,220,238,247,219,205,198,195,193,192,255,255,255,128,255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 3, 3, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 3, 0, 3, 3, 2, 3, 0, 3, 3, 2, 3, 0, 0, 0, 0, 0, 1, 3, 2, 2, 3, 0, 8, 28, 20, 20, 20, 20, 20, 28, 8, 0, 1, 3, 3, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 3, 0, 0, 0, 1, 3, 3, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + }; + oled_write_raw_P(ein60_logo, sizeof(ein60_logo)); +} +#endif + +#ifdef ENCODER_ENABLE +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + if (index == 0) { /* First encoder */ + if (clockwise) { + tap_code_delay(KC_VOLU, 10); + } else { + tap_code_delay(KC_VOLD, 10); + } + } else if (index == 1) { /* Second encoder */ + if (clockwise) { + tap_code(KC_DOWN); + } else { + tap_code(KC_UP); + } + } + return true; +} +#endif diff --git a/keyboards/ein_60/ein_60.h b/keyboards/ein_60/ein_60.h new file mode 100644 index 0000000000..91bfe3acfd --- /dev/null +++ b/keyboards/ein_60/ein_60.h @@ -0,0 +1,38 @@ +/* Copyright 2021 klackygears + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, \ + K10, K11, K12, K13, K14, K15, K17, K18, K19, K1A, K1B, K1C, \ + K20, K21, K22, K23, K24, K25, K27, K28, K29, K2A, K2B, K2C, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C }, \ + { K10, K11, K12, K13, K14, K15, KC_NO, K17, K18, K19, K1A, K1B, K1C }, \ + { K20, K21, K22, K23, K24, K25, KC_NO, K27, K28, K29, K2A, K2B, K2C }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C } \ +} diff --git a/keyboards/ein_60/glcdfont.c b/keyboards/ein_60/glcdfont.c new file mode 100644 index 0000000000..f9984b62ca --- /dev/null +++ b/keyboards/ein_60/glcdfont.c @@ -0,0 +1,233 @@ +// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0. +// See gfxfont.h for newer custom bitmap font info. + +#pragma once + +#include "progmem.h" + +static const char PROGMEM font[] = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00, + 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00, + 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00, + 0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00, + 0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00, + 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00, + 0x00, 0x18, 0x3C, 0x18, 0x00, 0x00, + 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00, + 0x00, 0x18, 0x24, 0x18, 0x00, 0x00, + 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00, + 0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00, + 0x26, 0x29, 0x79, 0x29, 0x26, 0x00, + 0x40, 0x7F, 0x05, 0x05, 0x07, 0x00, + 0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00, + 0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00, + 0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00, + 0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00, + 0x14, 0x22, 0x7F, 0x22, 0x14, 0x00, + 0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00, + 0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00, + 0x00, 0x66, 0x89, 0x95, 0x6A, 0x00, + 0x60, 0x60, 0x60, 0x60, 0x60, 0x00, + 0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00, + 0x08, 0x04, 0x7E, 0x04, 0x08, 0x00, + 0x10, 0x20, 0x7E, 0x20, 0x10, 0x00, + 0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00, + 0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00, + 0x1E, 0x10, 0x10, 0x10, 0x10, 0x00, + 0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00, + 0x30, 0x38, 0x3E, 0x38, 0x30, 0x00, + 0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x5F, 0x00, 0x00, 0x00, + 0x00, 0x07, 0x00, 0x07, 0x00, 0x00, + 0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00, + 0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00, + 0x23, 0x13, 0x08, 0x64, 0x62, 0x00, + 0x36, 0x49, 0x56, 0x20, 0x50, 0x00, + 0x00, 0x08, 0x07, 0x03, 0x00, 0x00, + 0x00, 0x1C, 0x22, 0x41, 0x00, 0x00, + 0x00, 0x41, 0x22, 0x1C, 0x00, 0x00, + 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00, + 0x08, 0x08, 0x3E, 0x08, 0x08, 0x00, + 0x00, 0x80, 0x70, 0x30, 0x00, 0x00, + 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, + 0x00, 0x00, 0x60, 0x60, 0x00, 0x00, + 0x20, 0x10, 0x08, 0x04, 0x02, 0x00, + 0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00, + 0x00, 0x42, 0x7F, 0x40, 0x00, 0x00, + 0x72, 0x49, 0x49, 0x49, 0x46, 0x00, + 0x21, 0x41, 0x49, 0x4D, 0x33, 0x00, + 0x18, 0x14, 0x12, 0x7F, 0x10, 0x00, + 0x27, 0x45, 0x45, 0x45, 0x39, 0x00, + 0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00, + 0x41, 0x21, 0x11, 0x09, 0x07, 0x00, + 0x36, 0x49, 0x49, 0x49, 0x36, 0x00, + 0x46, 0x49, 0x49, 0x29, 0x1E, 0x00, + 0x00, 0x00, 0x14, 0x00, 0x00, 0x00, + 0x00, 0x40, 0x34, 0x00, 0x00, 0x00, + 0x00, 0x08, 0x14, 0x22, 0x41, 0x00, + 0x14, 0x14, 0x14, 0x14, 0x14, 0x00, + 0x00, 0x41, 0x22, 0x14, 0x08, 0x00, + 0x02, 0x01, 0x59, 0x09, 0x06, 0x00, + 0x00, 0x41, 0x5D, 0x59, 0x4E, 0x00, + 0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00, + 0x7F, 0x49, 0x49, 0x49, 0x36, 0x00, + 0x3E, 0x41, 0x41, 0x41, 0x22, 0x00, + 0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00, + 0x7F, 0x49, 0x49, 0x49, 0x41, 0x00, + 0x7F, 0x09, 0x09, 0x09, 0x01, 0x00, + 0x3E, 0x41, 0x41, 0x51, 0x73, 0x00, + 0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00, + 0x00, 0x00, 0x7F, 0x00, 0x00, 0x00, + 0x20, 0x40, 0x40, 0x3F, 0x00, 0x00, + 0x7F, 0x08, 0x14, 0x22, 0x41, 0x00, + 0x7F, 0x40, 0x40, 0x40, 0x40, 0x00, + 0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00, + 0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00, + 0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00, + 0x7F, 0x09, 0x09, 0x09, 0x06, 0x00, + 0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00, + 0x7F, 0x09, 0x19, 0x29, 0x46, 0x00, + 0x26, 0x49, 0x49, 0x49, 0x32, 0x00, + 0x01, 0x01, 0x7F, 0x01, 0x01, 0x00, + 0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00, + 0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00, + 0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00, + 0x63, 0x14, 0x08, 0x14, 0x63, 0x00, + 0x03, 0x04, 0x78, 0x04, 0x03, 0x00, + 0x61, 0x59, 0x49, 0x4D, 0x43, 0x00, + 0x00, 0x7F, 0x41, 0x41, 0x41, 0x00, + 0x02, 0x04, 0x08, 0x10, 0x20, 0x00, + 0x00, 0x41, 0x41, 0x41, 0x7F, 0x00, + 0x04, 0x02, 0x01, 0x02, 0x04, 0x00, + 0x40, 0x40, 0x40, 0x40, 0x40, 0x00, + 0x00, 0x03, 0x07, 0x08, 0x00, 0x00, + 0x78, 0x14, 0x14, 0x78, 0x00, 0x00, + 0x7C, 0x54, 0x54, 0x28, 0x00, 0x00, + 0x38, 0x44, 0x44, 0x28, 0x00, 0x00, + 0x7C, 0x44, 0x44, 0x38, 0x00, 0x00, + 0x7C, 0x54, 0x54, 0x44, 0x00, 0x00, + 0x7C, 0x14, 0x14, 0x04, 0x00, 0x00, + 0x38, 0x44, 0x54, 0x34, 0x00, 0x00, + 0x7C, 0x10, 0x10, 0x7C, 0x00, 0x00, + 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, + 0x20, 0x40, 0x40, 0x3C, 0x00, 0x00, + 0x7C, 0x10, 0x28, 0x44, 0x00, 0x00, + 0x7C, 0x40, 0x40, 0x40, 0x00, 0x00, + 0x7C, 0x08, 0x70, 0x08, 0x7C, 0x00, + 0x7C, 0x08, 0x10, 0x7C, 0x00, 0x00, + 0x38, 0x44, 0x44, 0x38, 0x00, 0x00, + 0x7C, 0x14, 0x14, 0x08, 0x00, 0x00, + 0x38, 0x44, 0x24, 0x58, 0x00, 0x00, + 0x7C, 0x14, 0x34, 0x48, 0x00, 0x00, + 0x48, 0x54, 0x54, 0x24, 0x00, 0x00, + 0x04, 0x7C, 0x04, 0x00, 0x00, 0x00, + 0x3C, 0x40, 0x40, 0x3C, 0x00, 0x00, + 0x3C, 0x40, 0x20, 0x1C, 0x00, 0x00, + 0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00, + 0x44, 0x28, 0x10, 0x28, 0x44, 0x00, + 0x0C, 0x10, 0x70, 0x10, 0x0C, 0x00, + 0x44, 0x64, 0x54, 0x4C, 0x44, 0x00, + 0x00, 0x08, 0x36, 0x41, 0x00, 0x00, + 0x00, 0x00, 0x77, 0x00, 0x00, 0x00, + 0x00, 0x41, 0x36, 0x08, 0x00, 0x00, + 0x02, 0x01, 0x02, 0x04, 0x02, 0x00, + 0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0xFC, 0xFC, 0x2C, 0xEC, 0x2C, + 0x2C, 0x2C, 0x2C, 0x2C, 0x2C, 0x2C, + 0x2C, 0x2C, 0x2C, 0x2C, 0x2C, 0x3C, + 0x00, 0xC0, 0xC0, 0x40, 0xC0, 0x00, + 0xC0, 0xC0, 0x40, 0xC0, 0x80, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, + 0x40, 0xC0, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0xF8, 0xFC, 0x2C, 0xEC, 0x2C, + 0x2C, 0x2C, 0x2C, 0x2C, 0x2C, 0x2C, + 0x2C, 0x2C, 0x2C, 0x2C, 0x3C, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xF8, 0xFC, + 0x2C, 0xEC, 0x2C, 0x2C, 0x2C, 0x2C, + 0x2C, 0x2C, 0xAC, 0xEC, 0xEC, 0x6C, + 0xAC, 0xEC, 0xFC, 0x1C, 0xF0, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xE0, 0xF0, 0xF0, 0xF0, 0xE0, 0xEC, + 0xEE, 0xF7, 0xF3, 0x70, 0x20, 0x00, + 0x7C, 0x7C, 0x7C, 0x7E, 0x00, 0x7E, + 0x7E, 0x7E, 0x7F, 0x7F, 0x7F, 0x00, + 0x00, 0x80, 0xC0, 0xE0, 0x7E, 0x5B, + 0x4F, 0x5B, 0xFE, 0xC0, 0x00, 0x00, + 0xC0, 0x00, 0xDC, 0xD7, 0xDE, 0xDE, + 0xDE, 0xD7, 0xDC, 0x00, 0xC0, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0xFF, 0xFF, 0x10, 0xF7, 0x16, + 0x16, 0x16, 0x16, 0x16, 0x16, 0x16, + 0x16, 0x16, 0x16, 0x1E, 0x00, 0x00, + 0x00, 0xFF, 0xFF, 0x00, 0xFF, 0x00, + 0xFF, 0xFF, 0x00, 0xFB, 0x37, 0x6F, + 0xDE, 0xBC, 0x78, 0xF0, 0xE0, 0xFF, + 0x00, 0xFF, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0xFF, 0xFF, 0x00, 0xFF, 0x16, + 0x16, 0x16, 0x16, 0x16, 0x16, 0x16, + 0x16, 0x16, 0x16, 0xF6, 0xF6, 0xFE, + 0x0C, 0xF8, 0x00, 0x00, 0xFF, 0xFF, + 0x00, 0xFF, 0xE0, 0x70, 0xB8, 0xDC, + 0x6E, 0x37, 0x1B, 0x0D, 0x06, 0x03, + 0xFF, 0xFF, 0xFF, 0x00, 0xFF, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x0F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F, + 0x7F, 0x7F, 0x3F, 0x1E, 0x0C, 0x00, + 0x1F, 0x1F, 0x1F, 0x3F, 0x00, 0x3F, + 0x3F, 0x3F, 0x7F, 0x7F, 0x7F, 0x00, + 0x30, 0x7B, 0x7F, 0x78, 0x30, 0x20, + 0x20, 0x30, 0x78, 0x7F, 0x3B, 0x00, + 0x03, 0x00, 0x0F, 0x7F, 0x0F, 0x0F, + 0x0F, 0x7F, 0x0F, 0x00, 0x03, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x0F, 0x0F, 0x08, 0x0B, 0x0B, + 0x0B, 0x0B, 0x0B, 0x0B, 0x0B, 0x0B, + 0x0B, 0x0B, 0x0B, 0x0B, 0x0B, 0x0F, + 0x00, 0x0F, 0x0F, 0x08, 0x0F, 0x00, + 0x0F, 0x0F, 0x08, 0x0F, 0x00, 0x00, + 0x00, 0x01, 0x03, 0x06, 0x0D, 0x0B, + 0x08, 0x0F, 0x00, 0x20, 0x70, 0x50, + 0x50, 0x50, 0x50, 0x50, 0x70, 0x20, + 0x00, 0x07, 0x0F, 0x0C, 0x0B, 0x0B, + 0x0B, 0x0B, 0x0B, 0x0B, 0x0B, 0x0B, + 0x0B, 0x0B, 0x0B, 0x0B, 0x0B, 0x0B, + 0x0E, 0x03, 0x00, 0x00, 0x07, 0x0F, + 0x0C, 0x0B, 0x0A, 0x0B, 0x0B, 0x0B, + 0x0B, 0x0B, 0x0B, 0x0B, 0x0B, 0x0B, + 0x0B, 0x0B, 0x0B, 0x0E, 0x03, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +}; diff --git a/keyboards/ein_60/keymaps/default/keymap.c b/keyboards/ein_60/keymaps/default/keymap.c new file mode 100644 index 0000000000..3984dabcbf --- /dev/null +++ b/keyboards/ein_60/keymaps/default/keymap.c @@ -0,0 +1,208 @@ +/* Copyright 2021 klackygears + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +enum layer_names { + _QWERTY, + _LOWER, + _RAISE, + _ADJUST, + _FUNCTION, +}; + +enum custom_keycodes { + RGBRST = SAFE_RANGE, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* Qwerty + * ,-----------------------------------------. ,------. ,----------------------------------------. + * | Tab | Q | W | E | R | T | | Mute | | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+------| `------' |------+------+------+------+------+------| + * | Func | A | S | D | F | G | | H | J | K | L | ; | Enter| + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | | N | M | , | . | / | ' | + * |------+------+------|--------------------+ ,------. +--------------------|------+------+------| + * | Ctrl | ` | GUI | Alt |Lower |Space | |Space | |Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------' `------' `-----------------------------------------' + */ + [_QWERTY] = LAYOUT( + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_MUTE, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + MO(_FUNCTION), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, + OSM(MOD_LSFT), KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT, + KC_LCTL, KC_GRV, KC_LGUI, KC_LALT, MO(_LOWER), KC_SPC, KC_SPC, KC_SPC, MO(_RAISE), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT + ), + /* Lower + * ,-----------------------------------------. ,------. ,-----------------------------------------. + * | Esc | ! | @ | # | $ | % | | | | ^ | & | * | ( | ) | Del | + * |------+------+------+------+------+------| `------' |------+------+------+------+------+------| + * | F1 | F2 | F3 | F4 | F5 | F6 | | | _ | + | { | } |Enter | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | F7 | F8 | F9 | F10 | F11 | F12 | | | | | Mute | | | | + * |------+------+------|--------------------+ ,------. +--------------------|------+------+------| + * | | | | |Lower | Bksp | | | | Bksp |Raise | Next | Vol- | Vol+ | Play | + * `-----------------------------------------' `------' `-----------------------------------------' + */ + [_LOWER] = LAYOUT( + KC_ESC, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, _______, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, _______, + KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, KC_MUTE, _______, KC_PIPE, + _______, _______, _______, _______, _______, KC_BSPC, _______, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY + ), + /* Raise + * ,-----------------------------------------. ,------. ,-----------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | | | | 6 | 7 | 8 | 9 | 0 | Del | + * |------+------+------+------+------+------| `------' |------+------+------+------+------+------| + * | | 4 | 5 | 6 | + | F5 | | F6 | - | = | [ | ] |Enter | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * |Enter | 7 | 8 | 9 | - | F11 | | F12 |ISO # |ISO / | Mute | | \ | + * |------+------+------|--------------------+ ,------. +--------------------|------+------+------| + * | | , | 0 | . |Lower | Bksp | | | | Bksp |Raise | Next | Vol- | Vol+ | Play | + * `-----------------------------------------' `------' `-----------------------------------------' + */ + [_RAISE] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, _______, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, + _______, KC_4, KC_5, KC_6, KC_PLUS, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, _______, + KC_ENT, KC_7, KC_8, KC_9, KC_MINS, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_MUTE, _______, KC_BSLS, + _______, KC_COMM, KC_0, KC_DOT, _______, KC_BSPC, _______, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY + ), + /* Adjust (Lower + Raise) + * ,-----------------------------------------. ,------. ,-----------------------------------------. + * | | | | | | | | | |RGBRST|RGBMOD|RGBVAI|RGBSAI|RGBHUI| | + * |------+------+------+------+------+------| `------' |------+------+------+------+------+------| + * | | | | | | | | |RGBRMO|RGBVAD|RGBSAD|RGBHUD|RGBTOG| + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | | | | | | | | | |BLSTEP| + * |------+------+------|--------------------+ ,------. +--------------------|------+------+------| + * | | | | | | | | | | | | | | | RESET| + * `-----------------------------------------' `------' `-----------------------------------------' + */ + [_ADJUST] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, RGBRST, RGB_MOD, RGB_VAI, RGB_SAI, RGB_HUI, _______, + _______, _______, _______, _______, _______, _______, _______, RGB_RMOD,RGB_VAD, RGB_SAD, RGB_HUD, RGB_TOG, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_STEP, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET + ), + /* Function + * ,-----------------------------------------. ,------. ,-----------------------------------------. + * | | | | | | | | | | | | Up | | | | + * |------+------+------+------+------+------| `------' |------+------+------+------+------+------| + * | | | | | | | | | Left | Down |Right | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Caps | | | | | | | | | | | | | + * |------+------+------|--------------------+ ,------. +--------------------|------+------+------| + * | | | | | | | | | | | | | | | | + * `-----------------------------------------' `------' `-----------------------------------------' + */ + [_FUNCTION] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, + KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; + +layer_state_t layer_state_set_user(layer_state_t state) { + return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST); +} + +#ifdef OLED_ENABLE + + +static void render_ein60_logo(void) { + static const char PROGMEM ein60_logo[] = { + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,255,255, 11,251,139,139,139,139,139,139,139,139,139,139,139, 11, 15, 0,240,240, 16,240, 0,240,240, 16,240,224,192,128, 0, 0, 0, 0,240, 16,240, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,254,255, 11,251,139,139,139,139,139,139,139,139,139,139,139,143,128, 0, 0, 0, 0,254,255, 11,251, 11, 11, 11, 11,139,203,235,123,187,219,235,251,255, 7,252, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,255,255, 4,253,197,197,197,197,197,197,197,197,197,197,199,192,192, 0,255,255, 0,255, 0,255,255, 0,254, 13, 27, 55,111,222,188,120,255, 0,255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,255,255, 0,255,197,197,197,197,197,197,197,197,197,197,253,253,255,131,254, 0, 0,255,255, 0,255,184,220,238,247,219,205,198,195,193,192,255,255,255,128,255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 3, 3, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 3, 0, 3, 3, 2, 3, 0, 3, 3, 2, 3, 0, 0, 0, 0, 0, 1, 3, 2, 2, 3, 0, 8, 28, 20, 20, 20, 20, 20, 28, 8, 0, 1, 3, 3, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 3, 0, 0, 0, 1, 3, 3, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + }; + oled_write_raw_P(ein60_logo, sizeof(ein60_logo)); + } + +static void render_status(void) { + // Host Keyboard Layer Status + oled_write_P(PSTR("Layer: "), false); + switch (get_highest_layer(layer_state)) { + case _QWERTY: + oled_write_P(PSTR("Default\n"), false); + break; + case _LOWER: + oled_write_P(PSTR("Lower\n"), false); + break; + case _RAISE: + oled_write_P(PSTR("Raise\n"), false); + break; + case _ADJUST: + oled_write_P(PSTR("Adjust\n"), false); + break; + case _FUNCTION: + oled_write_P(PSTR("FN\n"), false); + break; + default: + // Or use the write_ln shortcut over adding '\n' to the end of your string + oled_write_ln_P(PSTR("Undefined"), false); + } + + + // Host Keyboard LED Status + led_t led_state = host_keyboard_led_state(); + oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false); + oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false); + oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false); + + oled_set_cursor(1,2); +} + +void oled_task_user(void) { + + render_status(); + oled_write_ln_P(PSTR(""), false); + render_ein60_logo(); +} +#endif + + +bool encoder_update_user(uint8_t index, bool clockwise) { + if (index == 0) { /* First encoder */ + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } else if (index == 1) { /* Second encoder */ + if (clockwise) { + tap_code(KC_DOWN); + } else { + tap_code(KC_UP); + } + } + return true; +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case RGBRST: + #ifdef RGBLIGHT_ENABLE + if (record->event.pressed) { + eeconfig_update_rgblight_default(); + rgblight_enable(); + } + #endif + break; + } + return true; +} diff --git a/keyboards/ein_60/keymaps/default/readme.md b/keyboards/ein_60/keymaps/default/readme.md new file mode 100644 index 0000000000..8f9aab0435 --- /dev/null +++ b/keyboards/ein_60/keymaps/default/readme.md @@ -0,0 +1,3 @@ +# The default keymap for EIN_60. + +It utilizes a nearly identical layout as the Plank. The OLED is enabled, rotary encoders are enabled, and the LEDs are enabled with RGB Matrix. You'll need to alter the rules.mk file in your own keymap to change this or simply cut the jumper pad with a hobby knife to disconnect them completely. There is an option to install a KELIKING KLJ-1102 speaker and enable with "AUDIO_ENABLE = yes" in your rules.mk file. diff --git a/keyboards/ein_60/keymaps/default/rules.mk b/keyboards/ein_60/keymaps/default/rules.mk new file mode 100644 index 0000000000..04b133f6a0 --- /dev/null +++ b/keyboards/ein_60/keymaps/default/rules.mk @@ -0,0 +1,4 @@ +# Build Options +# change yes to no to disable +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +RGB_MATRIX_ENABLE = yes # Enable for pretty RGB matrix effects diff --git a/keyboards/ein_60/keymaps/klackygears/config.h b/keyboards/ein_60/keymaps/klackygears/config.h new file mode 100644 index 0000000000..d3b1c7b4d9 --- /dev/null +++ b/keyboards/ein_60/keymaps/klackygears/config.h @@ -0,0 +1,28 @@ +/* Copyright 2021 klackygears + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + + + +#define PERMISSIVE_HOLD +#define TAPPING_TERM 150 +#define IGNORE_MOD_TAP_INTERRUPT + + +#ifdef RGB_MATRIX_ENABLE + #define RGB_MATRIX_KEYPRESSES +#endif diff --git a/keyboards/ein_60/keymaps/klackygears/keymap.c b/keyboards/ein_60/keymaps/klackygears/keymap.c new file mode 100644 index 0000000000..ea1d77dea7 --- /dev/null +++ b/keyboards/ein_60/keymaps/klackygears/keymap.c @@ -0,0 +1,176 @@ +/* Copyright 2020 klackygears + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H +#include "klackygears.h" +#include "stdio.h" + +//For an explanation of what's going on here with the keymap wrappers, check out drashna's user folder. +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_WINBASE] = LAYOUT_wrapper( + KC_ESC, _______________DVORAK_L1___________________, KC_MUTE, _______________DVORAK_R1___________________, KC_BSPC, + AU_TOG, _______________DVORAK_L2___________________, _______________DVORAK_R2___________________, RGB_TOG, + CK_TOGG, _______________WINDVK_L3___________________, _______________WINDVK_R3___________________, RGB_MOD, + KC_1, KC_2, KC_3, ________WIN_THUMB_L______, KC_SPC, ________WIN_THUMB_R______, KC_1, KC_2, KC_GAMER + ), + [_MACBASE] = LAYOUT_wrapper( + KC_ESC, _______________DVORAK_L1___________________, _______, _______________DVORAK_R1___________________, KC_BSPC, + RGB_TOG, _______________DVORAK_L2___________________, _______________DVORAK_R2___________________, RGB_TOG, + RGB_MOD, _______________MACDVK_L3___________________, _______________MACDVK_R3___________________, RGB_MOD, + _______, _______, _______, ________MAC_THUMB_L______, _______, ________MAC_THUMB_R______, _______, _______, _______ + ), + [_QWERTY] = LAYOUT_wrapper( + KC_ESC, _________________COLEMAK_L1________________, KC_ESC, _________________QWERTY_R1_________________, KC_BSPC, + KC_CAPS, _________________COLEMAK_L2________________, _________________QWERTY_R2_________________, KC_ENT, + KC_LSFT, _________________COLEMAK_L3________________, _________________QWERTY_R3_________________, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, _______, MO(_MNMB), MO(_SYMB), KC_SPC, MO(_SYMB), MO(_MNMB), KC_RGUI,_______, MO(_MDIA), MO(_FUNC) + ), + + //Borderlands + [_GAMER] = LAYOUT_wrapper( + KC_ESC, KC_R, KC_G, KC_W, KC_E, KC_1, _______, _________________RGB_1_____________________, KC_WINBASE, + KC_TAB, KC_V, KC_A, KC_S, KC_D, KC_2, _________________RGB_2_____________________, _______, + KC_C, KC_I, KC_F, KC_Q, KC_4, KC_3, _________________MEDIA_____________________, _______, + KC_Z, KC_X, KC_K, KC_LCTL, KC_LSFT, KC_SPC, KC_SPC, KC_F12, KC_P, KC_LEFT, KC_UP, KC_DOWN, KC_RIGHT + ), + + [_SYMB] = LAYOUT_wrapper( + _______, _________________PUNC_L1_ALT_______________, _______, _________________PUNC_R1___________________, _______, + _______, _________________PUNC_L3___________________, _________________PUNC_R2___________________, _______, + RGB_MOD, _________________PUNC_L3_ALT_______________, _________________PUNC_R3___________________, _______, + _______, _______, KC_NLCK, KC_SLCK, KC_DEL, _______, _______, _______, KC_CAPS, _______, _______, _______, _______ + ), + + [_FUNC] = LAYOUT_wrapper( + _______, _____________FUNC_L1_______________________, _______, _______, _____________FUNC_1_______________, _______, + _______, ________MAC_MISSION_CTRL__________, LGUI(KC_L), _______, _____________FUNC_2_______________, _______, + RGB_MOD, _____________FUNC_L3_______________________, _______, _____________FUNC_3_______________, _______, + _______, _______, _______, _______, _______, _______, _______, _______, KC_CAPS, _______, _______, _______, _______ + ), + + [_MNMB] = LAYOUT_wrapper( + _______, _________________MACNAV_L1_________________, _______, _________________NUMB_R1___________________, _______, + _______, _________________MACNAV_L2_________________, _________________NUMB_R2___________________, _______, + RGB_MOD, _________________MACNAV_L3_________________, _________________NUMB_R3_MAC_______________, _______, + _______, _______, _______, _______, _______, _______, _______, _______, RSFT_T(KC_ENT), KC_RSFT, _______, _______, _______ + ), + + + [_NUMB] = LAYOUT_wrapper( + _______, _________________WINNAV_L1_________________, _______, _________________NUMB_R1___________________, _______, + _______, _________________WINNAV_L2_________________, _________________NUMB_R2___________________, _______, + RGB_MOD, _________________WINNAV_L3_________________, _________________NUMB_R3_WIN_______________, _______, + _______, _______, _______, TO(_WINBASE), _______, _______, _______, _______, RSFT_T(KC_ENT), KC_RSFT, _______, _______, _______ + ), + + [_MDIA] = LAYOUT_wrapper( + _______, _________________LYOUT_____________________, _______, _________________RGB_1_____________________, RGB_TOG, + _______, MU_TOG, _______, _______, _______, CK_UP, _________________RGB_2_____________________, _______, + RGB_MOD, MU_MOD, MU_TOG, CK_TOGG, CK_RST, CK_DOWN, _________________MEDIA_____________________, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) + +}; + + +#ifdef OLED_ENABLE + + char wpm_str[10]; + +static void render_ein60_logo(void) { + static const char PROGMEM ein60_logo[] = { + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,255,255, 11,251,139,139,139,139,139,139,139,139,139,139,139, 11, 15, 0,240,240, 16,240, 0,240,240, 16,240,224,192,128, 0, 0, 0, 0,240, 16,240, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,254,255, 11,251,139,139,139,139,139,139,139,139,139,139,139,143,128, 0, 0, 0, 0,254,255, 11,251, 11, 11, 11, 11,139,203,235,123,187,219,235,251,255, 7,252, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,255,255, 4,253,197,197,197,197,197,197,197,197,197,197,199,192,192, 0,255,255, 0,255, 0,255,255, 0,254, 13, 27, 55,111,222,188,120,255, 0,255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,255,255, 0,255,197,197,197,197,197,197,197,197,197,197,253,253,255,131,254, 0, 0,255,255, 0,255,184,220,238,247,219,205,198,195,193,192,255,255,255,128,255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 3, 3, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 3, 0, 3, 3, 2, 3, 0, 3, 3, 2, 3, 0, 0, 0, 0, 0, 1, 3, 2, 2, 3, 0, 8, 28, 20, 20, 20, 20, 20, 28, 8, 0, 1, 3, 3, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 3, 0, 0, 0, 1, 3, 3, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + }; + oled_write_raw_P(ein60_logo, sizeof(ein60_logo)); + } + + + +static void render_status(void) { +//void oled_task_user(void) { + + // Host Keyboard Layer Status + oled_write_P(PSTR("Layer: "), false); + switch (get_highest_layer(layer_state)) { + case _WINBASE: + oled_write_P(PSTR("Base\n"), false); + break; + case _SYMB: + oled_write_P(PSTR("Symbol\n"), false); + break; + case _FUNC: + oled_write_P(PSTR("FN\n"), false); + break; + case _MNMB: + oled_write_P(PSTR("Numbpad Mac\n"), false); + break; + case _NUMB: + oled_write_P(PSTR("Numbpad\n"), false); + break; + case _MDIA: + oled_write_P(PSTR("Media\n"), false); + break; + default: + // Or use the write_ln shortcut over adding '\n' to the end of your string + oled_write_ln_P(PSTR("Undefined"), false); + } + + // Host Keyboard LED Status + led_t led_state = host_keyboard_led_state(); + oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false); + oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false); + oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false); + + + sprintf(wpm_str, "WPM: %03d", get_current_wpm()); + oled_set_cursor(1,2); + oled_write(wpm_str, false); + +} + +void oled_task_user(void) { + + render_status(); + oled_write_ln_P(PSTR(""), false); + render_ein60_logo(); + +} + +#endif + + +bool encoder_update_user(uint8_t index, bool clockwise) { + if (index == 0) { /* First encoder */ + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } else if (index == 1) { /* Second encoder */ + if (clockwise) { + tap_code(KC_DOWN); + } else { + tap_code(KC_UP); + } + } + return true; +} + + diff --git a/keyboards/ein_60/keymaps/klackygears/readme.md b/keyboards/ein_60/keymaps/klackygears/readme.md new file mode 100644 index 0000000000..f97a08bd09 --- /dev/null +++ b/keyboards/ein_60/keymaps/klackygears/readme.md @@ -0,0 +1 @@ +This is the klackygears userspace keymap for EIN_60. My userspace is heavily based on Drashna's userspace and draws a lot of features from him. diff --git a/keyboards/ein_60/keymaps/klackygears/rules.mk b/keyboards/ein_60/keymaps/klackygears/rules.mk new file mode 100644 index 0000000000..885ab5bafe --- /dev/null +++ b/keyboards/ein_60/keymaps/klackygears/rules.mk @@ -0,0 +1,8 @@ + +# Build Options +# change yes to no to disable +ENCODER_ENABLE = yes # Enables the use of one or more encoders +WPM_ENABLE = yes # Enables the WPM counter on the OLED +RGB_MATRIX_ENABLE = yes # Enable for pretty RGB matrix effects +AUDIO_ENABLE = yes +TAP_DANCE_ENABLE = yes diff --git a/keyboards/ein_60/keymaps/ledtest/keymap.c b/keyboards/ein_60/keymaps/ledtest/keymap.c new file mode 100644 index 0000000000..6f903124af --- /dev/null +++ b/keyboards/ein_60/keymaps/ledtest/keymap.c @@ -0,0 +1,207 @@ +/* Copyright 2021 klackygears + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +enum layer_names { + _QWERTY, + _LOWER, + _RAISE, + _ADJUST, + _FUNCTION, + }; + +enum custom_keycodes { + RGBRST = SAFE_RANGE +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* Qwerty + * ,-----------------------------------------. ,------. ,----------------------------------------. + * | Tab | Q | W | E | R | T | | Esc | |RGBRST|RGBHUI|RGBSAI|RGBVAI|RGBSPI| Bksp | + * |------+------+------+------+------+------| `------' |------+------+------+------+------+------| + * | Func | A | S | D | F | G | |RGBRMO|RGBHUD|RGBSAD|RGBVAD|RGBSPD|Enter | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | |RGBTOG| M | , | . | / | ' | + * |------+------+------|--------------------+ ,------. +--------------------|------+------+------| + * | Ctrl | ` | GUI | Alt |Lower |Space | |Space | |Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------' `------' `-----------------------------------------' + */ + [_QWERTY] = LAYOUT( + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_MUTE, RGBRST, RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI, KC_BSPC, + MO(_FUNCTION), KC_A, KC_S, KC_D, KC_F, KC_G, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, RGB_SPD, KC_ENT, + OSM(MOD_LSFT), KC_Z, KC_X, KC_C, KC_V, KC_B, RGB_TOG, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT, + KC_LCTL, KC_GRV, KC_LGUI, KC_LALT, MO(_LOWER), KC_SPC, KC_SPC, KC_CAPS, MO(_RAISE), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT + ), + /* Lower + * ,-----------------------------------------. ,------. ,-----------------------------------------. + * | Esc | ! | @ | # | $ | % | | | | ^ | & | * | ( | ) | Del | + * |------+------+------+------+------+------| `------' |------+------+------+------+------+------| + * | F1 | F2 | F3 | F4 | F5 | F6 | | | _ | + | { | } |Enter | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | F7 | F8 | F9 | F10 | F11 | F12 | | | | | Mute | | | | + * |------+------+------|--------------------+ ,------. +--------------------|------+------+------| + * | | | | |Lower | Bksp | | | | Bksp |Raise | Next | Vol- | Vol+ | Play | + * `-----------------------------------------' `------' `-----------------------------------------' + */ + [_LOWER] = LAYOUT( + KC_ESC, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, _______, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, _______, + KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, KC_MUTE, _______, KC_PIPE, + _______, _______, _______, _______, _______, KC_BSPC, _______, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY + ), + /* Raise + * ,-----------------------------------------. ,------. ,-----------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | | | | 6 | 7 | 8 | 9 | 0 | Del | + * |------+------+------+------+------+------| `------' |------+------+------+------+------+------| + * | | 4 | 5 | 6 | + | F5 | | F6 | - | = | [ | ] |Enter | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * |Enter | 7 | 8 | 9 | - | F11 | | F12 |ISO # |ISO / | Mute | | \ | + * |------+------+------|--------------------+ ,------. +--------------------|------+------+------| + * | | , | 0 | . |Lower | Bksp | | | | Bksp |Raise | Next | Vol- | Vol+ | Play | + * `-----------------------------------------' `------' `-----------------------------------------' + */ + [_RAISE] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, _______, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, + _______, KC_4, KC_5, KC_6, KC_PLUS, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, _______, + KC_ENT, KC_7, KC_8, KC_9, KC_MINS, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_MUTE, _______, KC_BSLS, + _______, KC_COMM, KC_0, KC_DOT, _______, KC_BSPC, _______, KC_BSPC, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY + ), + /* Adjust (Lower + Raise) + * ,-----------------------------------------. ,------. ,-----------------------------------------. + * | | | | | | | | | |RGBRST|RGBMOD|RGBVAI|RGBSAI|RGBHUI| | + * |------+------+------+------+------+------| `------' |------+------+------+------+------+------| + * | | | | | | | | |RGBRMO|RGBVAD|RGBSAD|RGBHUD|RGBTOG| + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | | | | | | | | | |BLSTEP| + * |------+------+------|--------------------+ ,------. +--------------------|------+------+------| + * | | | | | | | | | | | | | | | RESET| + * `-----------------------------------------' `------' `-----------------------------------------' + */ + [_ADJUST] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, RGBRST, RGB_MOD, RGB_VAI, RGB_SAI, RGB_HUI, _______, + _______, _______, _______, _______, _______, _______, _______, RGB_RMOD,RGB_VAD, RGB_SAD, RGB_HUD, RGB_TOG, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_STEP, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET + ), + /* Function + * ,-----------------------------------------. ,------. ,-----------------------------------------. + * | | | | | | | | | | | | Up | | | | + * |------+------+------+------+------+------| `------' |------+------+------+------+------+------| + * | | | | | | | | | Left | Down |Right | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Caps | | | | | | | | | | | | | + * |------+------+------|--------------------+ ,------. +--------------------|------+------+------| + * | | | | | | | | | | | | | | | | + * `-----------------------------------------' `------' `-----------------------------------------' + */ + [_FUNCTION] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, + KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; + +layer_state_t layer_state_set_user(layer_state_t state) { + return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST); +} + +#ifdef OLED_ENABLE + + +static void render_ein60_logo(void) { + static const char PROGMEM ein60_logo[] = { + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,255,255, 11,251,139,139,139,139,139,139,139,139,139,139,139, 11, 15, 0,240,240, 16,240, 0,240,240, 16,240,224,192,128, 0, 0, 0, 0,240, 16,240, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,254,255, 11,251,139,139,139,139,139,139,139,139,139,139,139,143,128, 0, 0, 0, 0,254,255, 11,251, 11, 11, 11, 11,139,203,235,123,187,219,235,251,255, 7,252, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,255,255, 4,253,197,197,197,197,197,197,197,197,197,197,199,192,192, 0,255,255, 0,255, 0,255,255, 0,254, 13, 27, 55,111,222,188,120,255, 0,255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,255,255, 0,255,197,197,197,197,197,197,197,197,197,197,253,253,255,131,254, 0, 0,255,255, 0,255,184,220,238,247,219,205,198,195,193,192,255,255,255,128,255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 3, 3, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 3, 0, 3, 3, 2, 3, 0, 3, 3, 2, 3, 0, 0, 0, 0, 0, 1, 3, 2, 2, 3, 0, 8, 28, 20, 20, 20, 20, 20, 28, 8, 0, 1, 3, 3, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 3, 0, 0, 0, 1, 3, 3, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + }; + oled_write_raw_P(ein60_logo, sizeof(ein60_logo)); + } + +static void render_status(void) { + // Host Keyboard Layer Status + oled_write_P(PSTR("Layer: "), false); + switch (get_highest_layer(layer_state)) { + case _QWERTY: + oled_write_P(PSTR("Default\n"), false); + break; + case _LOWER: + oled_write_P(PSTR("Lower\n"), false); + break; + case _RAISE: + oled_write_P(PSTR("Raise\n"), false); + break; + case _ADJUST: + oled_write_P(PSTR("Adjust\n"), false); + break; + case _FUNCTION: + oled_write_P(PSTR("FN\n"), false); + break; + default: + // Or use the write_ln shortcut over adding '\n' to the end of your string + oled_write_ln_P(PSTR("Undefined"), false); + } + + // Host Keyboard LED Status + led_t led_state = host_keyboard_led_state(); + oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false); + oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false); + oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false); + + oled_set_cursor(1,2); +} + +void oled_task_user(void) { + + render_status(); + oled_write_ln_P(PSTR(""), false); + render_ein60_logo(); +} +#endif + + +bool encoder_update_user(uint8_t index, bool clockwise) { + if (index == 0) { /* First encoder */ + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } else if (index == 1) { /* Second encoder */ + if (clockwise) { + tap_code(KC_DOWN); + } else { + tap_code(KC_UP); + } + } + return true; +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case RGBRST: + #ifdef RGBLIGHT_ENABLE + if (record->event.pressed) { + eeconfig_update_rgblight_default(); + rgblight_enable(); + } + #endif + break; + } + return true; +} diff --git a/keyboards/ein_60/keymaps/ledtest/readme.md b/keyboards/ein_60/keymaps/ledtest/readme.md new file mode 100644 index 0000000000..17954c3322 --- /dev/null +++ b/keyboards/ein_60/keymaps/ledtest/readme.md @@ -0,0 +1 @@ +# The keymap for testing the LEDs and OLED on the EIN_60 diff --git a/keyboards/ein_60/keymaps/ledtest/rules.mk b/keyboards/ein_60/keymaps/ledtest/rules.mk new file mode 100644 index 0000000000..a628544562 --- /dev/null +++ b/keyboards/ein_60/keymaps/ledtest/rules.mk @@ -0,0 +1,4 @@ +# Build Options +# change yes to no to disable +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +RGB_MATRIX_ENABLE = no # Enable for pretty RGB matrix effects diff --git a/keyboards/ein_60/readme.md b/keyboards/ein_60/readme.md new file mode 100644 index 0000000000..bbcf05f967 --- /dev/null +++ b/keyboards/ein_60/readme.md @@ -0,0 +1,27 @@ +# Ein_60 + +![Ein_60](https://i.imgur.com/cKPrNwO.jpeg) + +The Ein_60 is a 50 key ergo style column stagger keyboard PCB with a combined split layout that is designed to fit into a standard 60% tray mount case. It has USB C and comes in either hotswap or soldered versions. (Soldered version is Alps and MX compatible.) It can have two encoders in either of it's middle keys and an OLED installed in the center below the plate. The PCB supports a bottom mounted KELIKING KLJ-1102 low profile buzzer speaker for audio effects. It has 38 side facing LEDs around the entire outside edge of the PCB for very bright RGB effects as well as solder points for LED strips. The Ein_60 is compatible with the majority of Planck keycap sets and can have a 1U only layout, two 2U and two 1U, or two 3U keys in the thumb cluster (or any combination of those). + + +When flashing the Ein_60 use: make ein_60:default:flash + +![Ein_60 in 3D printed 60% case](https://i.imgur.com/3jkrERV.jpeg) + +* Keyboard Maintainer: [klackygears](https://github.com/klackygears) +* Hardware Supported: The Ein_60 PCBs +* Hardware Availability: [Case Data & firmware](https://github.com/klackygears) + +Make example for this keyboard (after setting up your build environment): + + make ein_60:default + +Flashing example for this keyboard: + + make ein_60:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +![Ein_60 PCB](https://i.imgur.com/5A1xW8S.jpeg) +![Ein_60 with FR4 plate](https://i.imgur.com/42DNsLY.jpeg) diff --git a/keyboards/ein_60/rules.mk b/keyboards/ein_60/rules.mk new file mode 100644 index 0000000000..47cbb0c12f --- /dev/null +++ b/keyboards/ein_60/rules.mk @@ -0,0 +1,26 @@ +# MCU name +MCU = at90usb1286 + +# Bootloader selection +BOOTLOADER = qmk-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +RGB_MATRIX_ENABLE = no # Enable for pretty RGB matrix effects +RGB_MATRIX_DRIVER = WS2812 # Define RGB Matrix +ENCODER_ENABLE = yes # Enables the use of one or more encoders +OLED_ENABLE = yes # Enables the use of OLED displays +OLED_DRIVER = SSD1306 From 88283cdab8be24000698b7a942725c591581cf8f Mon Sep 17 00:00:00 2001 From: precondition <57645186+precondition@users.noreply.github.com> Date: Wed, 22 Sep 2021 06:19:50 +0200 Subject: [PATCH 072/595] [Keyboard] Add commented out OLED/encoder code in default Kyria (#14539) Co-authored-by: Dasky <32983009+daskygit@users.noreply.github.com> Co-authored-by: Drashna Jaelre --- .../splitkb/kyria/keymaps/default/keymap.c | 97 +++++++++++++++++++ 1 file changed, 97 insertions(+) diff --git a/keyboards/splitkb/kyria/keymaps/default/keymap.c b/keyboards/splitkb/kyria/keymaps/default/keymap.c index 66c012d0cf..243104afc6 100644 --- a/keyboards/splitkb/kyria/keymaps/default/keymap.c +++ b/keyboards/splitkb/kyria/keymaps/default/keymap.c @@ -215,3 +215,100 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { // _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ // ), }; + +/* The default OLED and rotary encoder code can be found at the bottom of qmk_firmware/keyboards/splitkb/kyria/rev1/rev1.c + * These default settings can be overriden by your own settings in your keymap.c + * For your convenience, here's a copy of those settings so that you can uncomment them if you wish to apply your own modifications. + * DO NOT edit the rev1.c file; instead override the weakly defined default functions by your own. + */ + +/* DELETE THIS LINE TO UNCOMMENT (1/2) +#ifdef OLED_ENABLE +oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_180; } + +void oled_task_user(void) { + if (is_keyboard_master()) { + // QMK Logo and version information + // clang-format off + static const char PROGMEM qmk_logo[] = { + 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, + 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, + 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,0}; + // clang-format on + + oled_write_P(qmk_logo, false); + oled_write_P(PSTR("Kyria rev1.0\n\n"), false); + + // Host Keyboard Layer Status + oled_write_P(PSTR("Layer: "), false); + switch (get_highest_layer(layer_state|default_layer_state)) { + case _QWERTY: + oled_write_P(PSTR("QWERTY\n"), false); + break; + case _DVORAK: + oled_write_P(PSTR("Dvorak\n"), false); + break; + case _COLEMAK_DH: + oled_write_P(PSTR("Colemak-DH\n"), false); + break; + case _NAV: + oled_write_P(PSTR("Nav\n"), false); + break; + case _SYM: + oled_write_P(PSTR("Sym\n"), false); + break; + case _FUNCTION: + oled_write_P(PSTR("Function\n"), false); + break; + case _ADJUST: + oled_write_P(PSTR("Adjust\n"), false); + break; + default: + oled_write_P(PSTR("Undefined\n"), false); + } + + // Write host Keyboard LED Status to OLEDs + led_t led_usb_state = host_keyboard_led_state(); + oled_write_P(led_usb_state.num_lock ? PSTR("NUMLCK ") : PSTR(" "), false); + oled_write_P(led_usb_state.caps_lock ? PSTR("CAPLCK ") : PSTR(" "), false); + oled_write_P(led_usb_state.scroll_lock ? PSTR("SCRLCK ") : PSTR(" "), false); + } else { + // clang-format off + static const char PROGMEM kyria_logo[] = { + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,128,128,192,224,240,112,120, 56, 60, 28, 30, 14, 14, 14, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 14, 14, 14, 30, 28, 60, 56,120,112,240,224,192,128,128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0,192,224,240,124, 62, 31, 15, 7, 3, 1,128,192,224,240,120, 56, 60, 28, 30, 14, 14, 7, 7,135,231,127, 31,255,255, 31,127,231,135, 7, 7, 14, 14, 30, 28, 60, 56,120,240,224,192,128, 1, 3, 7, 15, 31, 62,124,240,224,192, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0,240,252,255, 31, 7, 1, 0, 0,192,240,252,254,255,247,243,177,176, 48, 48, 48, 48, 48, 48, 48,120,254,135, 1, 0, 0,255,255, 0, 0, 1,135,254,120, 48, 48, 48, 48, 48, 48, 48,176,177,243,247,255,254,252,240,192, 0, 0, 1, 7, 31,255,252,240, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0,255,255,255, 0, 0, 0, 0, 0,254,255,255, 1, 1, 7, 30,120,225,129,131,131,134,134,140,140,152,152,177,183,254,248,224,255,255,224,248,254,183,177,152,152,140,140,134,134,131,131,129,225,120, 30, 7, 1, 1,255,255,254, 0, 0, 0, 0, 0,255,255,255, 0, 0, 0, 0,255,255, 0, 0,192,192, 48, 48, 0, 0,240,240, 0, 0, 0, 0, 0, 0,240,240, 0, 0,240,240,192,192, 48, 48, 48, 48,192,192, 0, 0, 48, 48,243,243, 0, 0, 0, 0, 0, 0, 48, 48, 48, 48, 48, 48,192,192, 0, 0, 0, 0, 0, + 0, 0, 0,255,255,255, 0, 0, 0, 0, 0,127,255,255,128,128,224,120, 30,135,129,193,193, 97, 97, 49, 49, 25, 25,141,237,127, 31, 7,255,255, 7, 31,127,237,141, 25, 25, 49, 49, 97, 97,193,193,129,135, 30,120,224,128,128,255,255,127, 0, 0, 0, 0, 0,255,255,255, 0, 0, 0, 0, 63, 63, 3, 3, 12, 12, 48, 48, 0, 0, 0, 0, 51, 51, 51, 51, 51, 51, 15, 15, 0, 0, 63, 63, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 48, 48, 63, 63, 48, 48, 0, 0, 12, 12, 51, 51, 51, 51, 51, 51, 63, 63, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 15, 63,255,248,224,128, 0, 0, 3, 15, 63,127,255,239,207,141, 13, 12, 12, 12, 12, 12, 12, 12, 30,127,225,128, 0, 0,255,255, 0, 0,128,225,127, 30, 12, 12, 12, 12, 12, 12, 12, 13,141,207,239,255,127, 63, 15, 3, 0, 0,128,224,248,255, 63, 15, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 3, 7, 15, 62,124,248,240,224,192,128, 1, 3, 7, 15, 30, 28, 60, 56,120,112,112,224,224,225,231,254,248,255,255,248,254,231,225,224,224,112,112,120, 56, 60, 28, 30, 15, 7, 3, 1,128,192,224,240,248,124, 62, 15, 7, 3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 3, 7, 15, 14, 30, 28, 60, 56,120,112,112,112,224,224,224,224,224,224,224,224,224,224,224,224,224,224,224,224,112,112,112,120, 56, 60, 28, 30, 14, 15, 7, 3, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 + }; + // clang-format on + oled_write_raw_P(kyria_logo, sizeof(kyria_logo)); + } +} +#endif + +#ifdef ENCODER_ENABLE +bool encoder_update_user(uint8_t index, bool clockwise) { + + if (index == 0) { + // Volume control + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } else if (index == 1) { + // Page up/Page down + if (clockwise) { + tap_code(KC_PGDN); + } else { + tap_code(KC_PGUP); + } + } + return false; +} +#endif +DELETE THIS LINE TO UNCOMMENT (2/2) */ From e0022daf116a480a8884e549b1fef2fc4c604234 Mon Sep 17 00:00:00 2001 From: Pylon Date: Wed, 22 Sep 2021 00:21:23 -0400 Subject: [PATCH 073/595] Changed VENDOR_ID and PRODUCT_ID of Boston keyboard (#14528) --- keyboards/boston/config.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/keyboards/boston/config.h b/keyboards/boston/config.h index 7fa5d0ef5d..ff9c253ded 100644 --- a/keyboards/boston/config.h +++ b/keyboards/boston/config.h @@ -17,8 +17,8 @@ #pragma once /* USB Device descriptor parameter */ -#define VENDOR_ID 0xAC11 -#define PRODUCT_ID 0x4175 +#define VENDOR_ID 0xAC12 +#define PRODUCT_ID 0x4176 #define DEVICE_VER 0x0001 #define MANUFACTURER Pylon #define PRODUCT Boston From 88f6776216abca69529f470982e70f36beb560b3 Mon Sep 17 00:00:00 2001 From: "WiZ.GG" <39291381+wizard-gg@users.noreply.github.com> Date: Wed, 22 Sep 2021 07:51:44 +0330 Subject: [PATCH 074/595] [Keyboard] Add JadooKB JKB65 RGB (#14525) Co-authored-by: Ryan Co-authored-by: Drashna Jaelre --- keyboards/jadookb/jkb65/config.h | 60 +++++++++++ keyboards/jadookb/jkb65/info.json | 10 ++ keyboards/jadookb/jkb65/jkb65.c | 101 ++++++++++++++++++ keyboards/jadookb/jkb65/jkb65.h | 34 ++++++ .../jadookb/jkb65/keymaps/default/keymap.c | 52 +++++++++ keyboards/jadookb/jkb65/keymaps/via/config.h | 20 ++++ keyboards/jadookb/jkb65/keymaps/via/keymap.c | 52 +++++++++ keyboards/jadookb/jkb65/keymaps/via/rules.mk | 1 + keyboards/jadookb/jkb65/readme.md | 23 ++++ keyboards/jadookb/jkb65/rules.mk | 24 +++++ 10 files changed, 377 insertions(+) create mode 100644 keyboards/jadookb/jkb65/config.h create mode 100644 keyboards/jadookb/jkb65/info.json create mode 100644 keyboards/jadookb/jkb65/jkb65.c create mode 100644 keyboards/jadookb/jkb65/jkb65.h create mode 100644 keyboards/jadookb/jkb65/keymaps/default/keymap.c create mode 100644 keyboards/jadookb/jkb65/keymaps/via/config.h create mode 100644 keyboards/jadookb/jkb65/keymaps/via/keymap.c create mode 100644 keyboards/jadookb/jkb65/keymaps/via/rules.mk create mode 100644 keyboards/jadookb/jkb65/readme.md create mode 100644 keyboards/jadookb/jkb65/rules.mk diff --git a/keyboards/jadookb/jkb65/config.h b/keyboards/jadookb/jkb65/config.h new file mode 100644 index 0000000000..7ad707252e --- /dev/null +++ b/keyboards/jadookb/jkb65/config.h @@ -0,0 +1,60 @@ + /* Copyright 2021 Wizad-GG + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "config_common.h" + +#define VENDOR_ID 0x4A4B +#define PRODUCT_ID 0xEF6A +#define DEVICE_VER 0x0001 +#define MANUFACTURER JadooKB +#define PRODUCT JKB65 RGB + +#define MATRIX_ROWS 5 +#define MATRIX_COLS 16 + +#define MATRIX_ROW_PINS { E6, B7, F7, F4, F5 } +#define MATRIX_COL_PINS { F6,B1,F1,C7,C6,B6,B5,B4,D7,B3,D4,D5,D3,D2,D1,D0 } + +#define UNUSED_PINS + +#define DIODE_DIRECTION COL2ROW + +#define RGB_DI_PIN F0 + +#define DRIVER_LED_TOTAL 67 +#ifdef RGB_DI_PIN + #define RGBLED_NUM 67 + + #define RGB_DISABLE_WHEN_USB_SUSPENDED + #define RGB_MATRIX_FRAMEBUFFER_EFFECTS + #define RGB_MATRIX_KEYPRESSES + #define RGBLIGHT_EFFECT_RAINBOW_MOOD + #define RGBLIGHT_SLEEP + #define RGB_DISABLE_TIMEOUT 0 + #define RGB_DISABLE_AFTER_TIMEOUT 0 + #define RGBLIGHT_TIMEOUT 60000 +#endif + + +#define DEBOUNCE 5 +#define LOCKING_SUPPORT_ENABLE +#define LOCKING_RESYNC_ENABLE + +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + diff --git a/keyboards/jadookb/jkb65/info.json b/keyboards/jadookb/jkb65/info.json new file mode 100644 index 0000000000..6d1953834f --- /dev/null +++ b/keyboards/jadookb/jkb65/info.json @@ -0,0 +1,10 @@ +{ + "keyboard_name": "jkb65", + "url": "https://jadookb.com/", + "maintainer": "Wizard-GG", + "layouts": { + "LAYOUT": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"~", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Delete", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"PgUp", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"PgDn", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Fn", "x":10, "y":4, "w":1.25}, {"label":"Menu", "x":11.25, "y":4, "w":1.25}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}] + } + } +} \ No newline at end of file diff --git a/keyboards/jadookb/jkb65/jkb65.c b/keyboards/jadookb/jkb65/jkb65.c new file mode 100644 index 0000000000..1f22b30a79 --- /dev/null +++ b/keyboards/jadookb/jkb65/jkb65.c @@ -0,0 +1,101 @@ + /* Copyright 2021 Wizard-GG + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "jkb65.h" + +#ifdef RGB_MATRIX_ENABLE + +led_config_t g_led_config = { { + // Key Matrix to LED Index + { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 }, + { 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29 }, + { 30, NO_LED, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43 }, + { NO_LED, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57 }, + { 58, 59, 60, NO_LED, NO_LED, NO_LED, 61, NO_LED, NO_LED, 62, 63, 64, 65, 66 } +}, { + // LED Index to Physical Position + { 0, 0}, { 15, 0}, { 30, 0}, { 45, 0}, { 60, 0}, { 75, 0}, { 90, 0}, {105, 0}, {120, 0}, {135, 0}, {150, 0}, {165, 0}, {180, 0}, {202, 0}, {225, 0}, // Esc, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, -, =, Backspace, Delete + { 4, 16}, { 22, 16}, { 37, 16}, { 52, 16}, { 67, 16}, { 82, 16}, { 97, 16}, {112, 16}, {127, 16}, {142, 16}, {157, 16}, {172, 16}, {187, 16}, {206, 16}, {225, 16}, // Tab, Q, W, E, R, T, Y, U, I, O, P, [, ], backslash , Home + { 6, 32}, { 26, 32}, { 41, 32}, { 56, 32}, { 71, 32}, { 86, 32}, {101, 32}, {116, 32}, {131, 32}, {146, 32}, {161, 32}, {176, 32}, {201, 32}, {225, 32}, // Capslock, A, S, D, F, G, H, J, K, L, ;, ', Enter, Page up + { 9, 48}, { 34, 48}, { 49, 48}, { 64, 48}, { 79, 48}, { 94, 48}, {109, 48}, {124, 48}, {139, 48}, {154, 48}, {169, 48}, {189, 48}, {208, 48}, {225, 48}, // LShift, Z, X, C, V, B, N, M, ,, ., /, Shift, Up, Page Down + { 2, 64}, { 21, 64}, { 39, 64}, { 94, 64}, {148, 64}, {163, 64}, {193, 64}, {208, 64}, {225, 64}, // Ctrl, GUI, Alt, Space, RAlt, FN, Ctrl, Left, Down, Right + +}, { + // LED Index to Flag + 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, // Esc, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, -, =, Backspace, Delete + 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, // Tab, Q, W, E, R, T, Y, U, I, O, P, [, ], backslash , Home + 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, // Capslock, A, S, D, F, G, H, J, K, L, ;, ', Enter, Page up + 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 1, // LShift, Z, X, C, V, B, N, M, ,, ., /, Shift, Up, Page Down + 1, 1, 1, 4, 1, 1, 1, 1, 1, // Ctrl, GUI, Alt, Space, Alt, FN, Left, Down, Right + +} }; + +static uint16_t key_timer; +static void refresh_rgb(void); +static void check_rgb_timeout(void); +bool is_rgb_timeout = false; + + +void refresh_rgb() { + key_timer = timer_read(); + if (is_rgb_timeout) { + + is_rgb_timeout = false; + rgblight_wakeup(); + } +} + +void check_rgb_timeout() { + if (!is_rgb_timeout && timer_elapsed(key_timer) > RGBLIGHT_TIMEOUT) { + rgblight_suspend(); + is_rgb_timeout = true; + } +} + + + +void housekeeping_task_kb(void) { + #ifdef RGBLIGHT_TIMEOUT + check_rgb_timeout(); + #endif + +} + +void post_process_record_kb(uint16_t keycode, keyrecord_t *record) { +#ifdef RGBLIGHT_TIMEOUT + if (record->event.pressed) { refresh_rgb(); } +#endif + post_process_record_user(keycode, record); +} + +bool encoder_update_kb(uint8_t index, bool clockwise) { +#ifdef RGBLIGHT_TIMEOUT + refresh_rgb(); +#endif + + return encoder_update_user(index, clockwise); +} + + + + +__attribute__ ((weak)) +void rgb_matrix_indicators_user(void) { + if (host_keyboard_led_state().caps_lock) { + rgb_matrix_set_color(30, 0xFF, 0xFF, 0xFF); + } +} +#endif diff --git a/keyboards/jadookb/jkb65/jkb65.h b/keyboards/jadookb/jkb65/jkb65.h new file mode 100644 index 0000000000..fa88e64bf7 --- /dev/null +++ b/keyboards/jadookb/jkb65/jkb65.h @@ -0,0 +1,34 @@ +/* Copyright 2021 Wizard-GG + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +#define LAYOUT_67_ansi( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0E, K0F, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1F, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K2F, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3F, \ + K40, K41, K42, K46, K4A, K4B, K4C, K4D, K4F \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, KC_NO, K0E, K0F }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, KC_NO, K1F }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, KC_NO, K2F }, \ + { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, KC_NO, K3F }, \ + { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, KC_NO, K4F }, \ +} + diff --git a/keyboards/jadookb/jkb65/keymaps/default/keymap.c b/keyboards/jadookb/jkb65/keymaps/default/keymap.c new file mode 100644 index 0000000000..e866ef597f --- /dev/null +++ b/keyboards/jadookb/jkb65/keymaps/default/keymap.c @@ -0,0 +1,52 @@ + /* Copyright 2021 Wizard-GG + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_TILD, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_PSCR, + _______, RGB_RMOD, _______, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAI, _______, + MAGIC_UNNO_GUI,MAGIC_NO_GUI, _______, RGB_TOG, _______, MO(2), RGB_SPD, RGB_VAD, RGB_SPI + ), + [2] = LAYOUT( + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [3] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; + diff --git a/keyboards/jadookb/jkb65/keymaps/via/config.h b/keyboards/jadookb/jkb65/keymaps/via/config.h new file mode 100644 index 0000000000..31f7507464 --- /dev/null +++ b/keyboards/jadookb/jkb65/keymaps/via/config.h @@ -0,0 +1,20 @@ + /* Copyright 2021 Wizard-GG + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#define USB_POLLING_INTERVAL_MS 1 +#define QMK_KEYS_PER_SCAN 12 diff --git a/keyboards/jadookb/jkb65/keymaps/via/keymap.c b/keyboards/jadookb/jkb65/keymaps/via/keymap.c new file mode 100644 index 0000000000..e866ef597f --- /dev/null +++ b/keyboards/jadookb/jkb65/keymaps/via/keymap.c @@ -0,0 +1,52 @@ + /* Copyright 2021 Wizard-GG + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_TILD, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_PSCR, + _______, RGB_RMOD, _______, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAI, _______, + MAGIC_UNNO_GUI,MAGIC_NO_GUI, _______, RGB_TOG, _______, MO(2), RGB_SPD, RGB_VAD, RGB_SPI + ), + [2] = LAYOUT( + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [3] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; + diff --git a/keyboards/jadookb/jkb65/keymaps/via/rules.mk b/keyboards/jadookb/jkb65/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/jadookb/jkb65/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/jadookb/jkb65/readme.md b/keyboards/jadookb/jkb65/readme.md new file mode 100644 index 0000000000..9f8800d77c --- /dev/null +++ b/keyboards/jadookb/jkb65/readme.md @@ -0,0 +1,23 @@ +# JKB65 RGB + +![JKB65RGB](https://i.imgur.com/CKtVyyIh.jpg) + +A 65% hotswap in switch RGB keyboard from JadooKB. + +* Keyboard Maintainer: [Wizard-GG](https://github.com/wizard-gg) +* Hardware Supported: JKB65 RGB +* Hardware Availability: [Jadoo Keyboard](https://jadookb.com/jkb65) + +Make example for this keyboard (after setting up your build environment): + + make jadookb/jkb65:default + +Flashing example for this keyboard: + + make jadookb/jkb65:default:flash + +To reset the board into bootloader mode, do the following step: + +* Hold the **Esc** key while connecting the USB cable + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/jadookb/jkb65/rules.mk b/keyboards/jadookb/jkb65/rules.mk new file mode 100644 index 0000000000..091ce689b7 --- /dev/null +++ b/keyboards/jadookb/jkb65/rules.mk @@ -0,0 +1,24 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +RGB_MATRIX_ENABLE = yes +RGB_MATRIX_DRIVER = WS2812 +LTO_ENABLE = yes From f37af05f2ac00689aa14492705eafa9f689fec41 Mon Sep 17 00:00:00 2001 From: milostatsea <90910151+milostatsea@users.noreply.github.com> Date: Wed, 22 Sep 2021 06:22:04 +0200 Subject: [PATCH 075/595] [Keyboard] fixed one of the unicode drawings of the layout in dz60.h (#14482) --- keyboards/dz60/dz60.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/keyboards/dz60/dz60.h b/keyboards/dz60/dz60.h index afaf271c14..8062a74ce1 100644 --- a/keyboards/dz60/dz60.h +++ b/keyboards/dz60/dz60.h @@ -259,9 +259,9 @@ * │20 │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │2d │ * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────────┤ * │30 │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3d │ - * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤ + * ├────┬───┴┬──┴─┬─┴───┴──┬┴───┼───┴───┴──┬┴───┼───┴┬────┬────┤ * │40 │41 │43 │44 │46 │48 │4a │4b │4d │4e │ - * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ + * └────┴────┴────┴────────┴────┴──────────┴────┴────┴────┴────┘ */ #define LAYOUT_60_ansi_split( \ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, \ From 4e0125c22c0271cbb5689eb501e60721706bedcb Mon Sep 17 00:00:00 2001 From: kopibeng <52724926+kopibeng@users.noreply.github.com> Date: Wed, 22 Sep 2021 12:23:51 +0800 Subject: [PATCH 076/595] [Keyboard] Add support for XT8x (#14440) Co-authored-by: Drashna Jaelre --- keyboards/kopibeng/xt8x/chconf.h | 31 ++++++ keyboards/kopibeng/xt8x/config.h | 83 ++++++++++++++ keyboards/kopibeng/xt8x/info.json | 102 ++++++++++++++++++ .../kopibeng/xt8x/keymaps/default/keymap.c | 61 +++++++++++ keyboards/kopibeng/xt8x/keymaps/via/keymap.c | 61 +++++++++++ keyboards/kopibeng/xt8x/keymaps/via/rules.mk | 1 + keyboards/kopibeng/xt8x/readme.md | 21 ++++ keyboards/kopibeng/xt8x/rules.mk | 25 +++++ keyboards/kopibeng/xt8x/xt8x.c | 43 ++++++++ keyboards/kopibeng/xt8x/xt8x.h | 39 +++++++ 10 files changed, 467 insertions(+) create mode 100644 keyboards/kopibeng/xt8x/chconf.h create mode 100644 keyboards/kopibeng/xt8x/config.h create mode 100644 keyboards/kopibeng/xt8x/info.json create mode 100644 keyboards/kopibeng/xt8x/keymaps/default/keymap.c create mode 100644 keyboards/kopibeng/xt8x/keymaps/via/keymap.c create mode 100644 keyboards/kopibeng/xt8x/keymaps/via/rules.mk create mode 100644 keyboards/kopibeng/xt8x/readme.md create mode 100644 keyboards/kopibeng/xt8x/rules.mk create mode 100644 keyboards/kopibeng/xt8x/xt8x.c create mode 100644 keyboards/kopibeng/xt8x/xt8x.h diff --git a/keyboards/kopibeng/xt8x/chconf.h b/keyboards/kopibeng/xt8x/chconf.h new file mode 100644 index 0000000000..5d57f9aece --- /dev/null +++ b/keyboards/kopibeng/xt8x/chconf.h @@ -0,0 +1,31 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +/* + * This file was auto-generated by: + * `qmk chibios-confmigrate -i keyboards/kopibeng/xt8x/chconf.h -r platforms/chibios/common/configs/chconf.h` + */ + +#pragma once + +#define CH_CFG_ST_FREQUENCY 10000 + +#define CH_CFG_OPTIMIZE_SPEED FALSE + +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE + +#include_next + diff --git a/keyboards/kopibeng/xt8x/config.h b/keyboards/kopibeng/xt8x/config.h new file mode 100644 index 0000000000..d1508dfdd6 --- /dev/null +++ b/keyboards/kopibeng/xt8x/config.h @@ -0,0 +1,83 @@ +/* Copyright 2021 Samuel Lu + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4B50 // 'KP' kopibeng +#define PRODUCT_ID 0x8788 +#define DEVICE_VER 0x0001 +#define MANUFACTURER kopibeng +#define PRODUCT XT8x + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 17 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { A8, B15, A9, B12, A3, B14 } +#define MATRIX_COL_PINS { A2, A1, A0, B11, B10, B2, F1, B1, B0, A7, A6, A5, F0, A4, C15, C14, C13 } + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +#define LED_CAPS_LOCK_PIN B3 +#define LED_SCROLL_LOCK_PIN A15 +#define INDICATOR_PIN_0 B13 + +#define RGB_DI_PIN A10 +#ifdef RGB_DI_PIN + #define RGBLED_NUM 19 + #define RGBLIGHT_HUE_STEP 8 + #define RGBLIGHT_SAT_STEP 8 + #define RGBLIGHT_VAL_STEP 8 + #define RGBLIGHT_LIMIT_VAL 200 /* The maximum brightness level */ + #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ +// #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ + #define RGBLIGHT_EFFECT_BREATHING + #define RGBLIGHT_EFFECT_RAINBOW_MOOD + #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS + #define RGBLIGHT_EFFECT_STATIC_GRADIENT + #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE diff --git a/keyboards/kopibeng/xt8x/info.json b/keyboards/kopibeng/xt8x/info.json new file mode 100644 index 0000000000..d2a59eef8b --- /dev/null +++ b/keyboards/kopibeng/xt8x/info.json @@ -0,0 +1,102 @@ +{ + "keyboard_name": "XT8x", + "maintainer": "kopibeng", + "url": "", + "layouts": { + "LAYOUT_all": { + "layout": [ + { "label": "0,0", "x": 0, "y": 0 }, + { "label": "0,1", "x": 1.25, "y": 0 }, + { "label": "0,2", "x": 2.25, "y": 0 }, + { "label": "0,3", "x": 3.25, "y": 0 }, + { "label": "0,4", "x": 4.25, "y": 0 }, + { "label": "0,5", "x": 5.5, "y": 0 }, + { "label": "0,6", "x": 6.5, "y": 0 }, + { "label": "0,7", "x": 7.5, "y": 0 }, + { "label": "0,8", "x": 8.5, "y": 0 }, + { "label": "0,9", "x": 9.75, "y": 0 }, + { "label": "0,10", "x": 10.75, "y": 0 }, + { "label": "0,11", "x": 11.75, "y": 0 }, + { "label": "0,12", "x": 12.75, "y": 0 }, + { "label": "0,13", "x": 14, "y": 0 }, + { "label": "0,14", "x": 15.25, "y": 0 }, + { "label": "0,15", "x": 16.25, "y": 0 }, + { "label": "0,16", "x": 17.25, "y": 0 }, + { "label": "1,0", "x": 0, "y": 1.25 }, + { "label": "1,1", "x": 1, "y": 1.25 }, + { "label": "1,2", "x": 2, "y": 1.25 }, + { "label": "1,3", "x": 3, "y": 1.25 }, + { "label": "1,4", "x": 4, "y": 1.25 }, + { "label": "1,5", "x": 5, "y": 1.25 }, + { "label": "1,6", "x": 6, "y": 1.25 }, + { "label": "1,7", "x": 7, "y": 1.25 }, + { "label": "1,8", "x": 8, "y": 1.25 }, + { "label": "1,9", "x": 9, "y": 1.25 }, + { "label": "1,10", "x": 10, "y": 1.25 }, + { "label": "1,11", "x": 11, "y": 1.25 }, + { "label": "1,12", "x": 12, "y": 1.25 }, + { "label": "2,12", "x": 13, "y": 1.25 }, + { "label": "1,13", "x": 14, "y": 1.25 }, + { "label": "1,14", "x": 15.25, "y": 1.25 }, + { "label": "1,15", "x": 16.25, "y": 1.25 }, + { "label": "1,16", "x": 17.25, "y": 1.25 }, + { "label": "2,0", "w": 1.5, "x": 0, "y": 2.25 }, + { "label": "2,1", "x": 1.5, "y": 2.25 }, + { "label": "2,2", "x": 2.5, "y": 2.25 }, + { "label": "2,3", "x": 3.5, "y": 2.25 }, + { "label": "2,4", "x": 4.5, "y": 2.25 }, + { "label": "2,5", "x": 5.5, "y": 2.25 }, + { "label": "2,6", "x": 6.5, "y": 2.25 }, + { "label": "2,7", "x": 7.5, "y": 2.25 }, + { "label": "2,8", "x": 8.5, "y": 2.25 }, + { "label": "2,9", "x": 9.5, "y": 2.25 }, + { "label": "2,10", "x": 10.5, "y": 2.25 }, + { "label": "2,11", "x": 11.5, "y": 2.25 }, + { "label": "3,12", "x": 12.5, "y": 2.25 }, + { "label": "2,13", "w": 1.5, "x": 13.5, "y": 2.25 }, + { "label": "2,14", "x": 15.25, "y": 2.25 }, + { "label": "2,15", "x": 16.25, "y": 2.25 }, + { "label": "2,16", "x": 17.25, "y": 2.25 }, + { "label": "3,0", "w": 1.75, "x": 0, "y": 3.25 }, + { "label": "3,1", "x": 1.75, "y": 3.25 }, + { "label": "3,2", "x": 2.75, "y": 3.25 }, + { "label": "3,3", "x": 3.75, "y": 3.25 }, + { "label": "3,4", "x": 4.75, "y": 3.25 }, + { "label": "3,5", "x": 5.75, "y": 3.25 }, + { "label": "3,6", "x": 6.75, "y": 3.25 }, + { "label": "3,7", "x": 7.75, "y": 3.25 }, + { "label": "3,8", "x": 8.75, "y": 3.25 }, + { "label": "3,9", "x": 9.75, "y": 3.25 }, + { "label": "3,10", "x": 10.75, "y": 3.25 }, + { "label": "3,11", "x": 11.75, "y": 3.25 }, + { "label": "3,13", "w": 2.25, "x": 12.75, "y": 3.25 }, + { "label": "4,0", "w": 1.25, "x": 0, "y": 4.25 }, + { "label": "4,1", "x": 1.25, "y": 4.25 }, + { "label": "4,2", "x": 2.25, "y": 4.25 }, + { "label": "4,3", "x": 3.25, "y": 4.25 }, + { "label": "4,4", "x": 4.25, "y": 4.25 }, + { "label": "4,5", "x": 5.25, "y": 4.25 }, + { "label": "4,6", "x": 6.25, "y": 4.25 }, + { "label": "4,7", "x": 7.25, "y": 4.25 }, + { "label": "4,8", "x": 8.25, "y": 4.25 }, + { "label": "4,9", "x": 9.25, "y": 4.25 }, + { "label": "4,10", "x": 10.25, "y": 4.25 }, + { "label": "4,11", "x": 11.25, "y": 4.25 }, + { "label": "4,12", "w": 1.75, "x": 12.25, "y": 4.25 }, + { "label": "4,13", "x": 14, "y": 4.25 }, + { "label": "4,15", "x": 16.25, "y": 4.25 }, + { "label": "5,0", "w": 1.25, "x": 0, "y": 5.25 }, + { "label": "5,1", "w": 1.25, "x": 1.25, "y": 5.25 }, + { "label": "5,2", "w": 1.25, "x": 2.5, "y": 5.25 }, + { "label": "5,6", "w": 6.25, "x": 3.75, "y": 5.25 }, + { "label": "5,10", "w": 1.25, "x": 10, "y": 5.25 }, + { "label": "5,11", "w": 1.25, "x": 11.25, "y": 5.25 }, + { "label": "5,12", "w": 1.25, "x": 12.5, "y": 5.25 }, + { "label": "5,13", "w": 1.25, "x": 13.75, "y": 5.25 }, + { "label": "5,14", "x": 15.25, "y": 5.25 }, + { "label": "5,15", "x": 16.25, "y": 5.25 }, + { "label": "4,16", "x": 17.25, "y": 5.25 } + ] + } + } +} \ No newline at end of file diff --git a/keyboards/kopibeng/xt8x/keymaps/default/keymap.c b/keyboards/kopibeng/xt8x/keymaps/default/keymap.c new file mode 100644 index 0000000000..368f0f1127 --- /dev/null +++ b/keyboards/kopibeng/xt8x/keymaps/default/keymap.c @@ -0,0 +1,61 @@ +/* Copyright 2021 Samuel Lu + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + // Default layer + [0] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_BSLS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(2), KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + // Fn1 Layer + [1] = LAYOUT_all( + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_VOLU, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_MNXT, KC_VOLD, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + // Fn2 Layer + [2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + // Fn3 Layer + [3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), +}; + diff --git a/keyboards/kopibeng/xt8x/keymaps/via/keymap.c b/keyboards/kopibeng/xt8x/keymaps/via/keymap.c new file mode 100644 index 0000000000..368f0f1127 --- /dev/null +++ b/keyboards/kopibeng/xt8x/keymaps/via/keymap.c @@ -0,0 +1,61 @@ +/* Copyright 2021 Samuel Lu + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + // Default layer + [0] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_BSLS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(2), KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + // Fn1 Layer + [1] = LAYOUT_all( + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_VOLU, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_MNXT, KC_VOLD, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + // Fn2 Layer + [2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + // Fn3 Layer + [3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), +}; + diff --git a/keyboards/kopibeng/xt8x/keymaps/via/rules.mk b/keyboards/kopibeng/xt8x/keymaps/via/rules.mk new file mode 100644 index 0000000000..036bd6d1c3 --- /dev/null +++ b/keyboards/kopibeng/xt8x/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes \ No newline at end of file diff --git a/keyboards/kopibeng/xt8x/readme.md b/keyboards/kopibeng/xt8x/readme.md new file mode 100644 index 0000000000..cdb333a260 --- /dev/null +++ b/keyboards/kopibeng/xt8x/readme.md @@ -0,0 +1,21 @@ +# XT8x + +![XT8x](https://i.imgur.com/J8QqWWq.png) + +A QMK-powered, VIA-enabled TKL PCB with support for ANSI/ISO layout, F12/F13 top row, split Backspace, split Right Shift and 6.25U/7U bottom row. + +* Keyboard Maintainer: kopibeng +* Hardware Supported: A TKL keyboard with STM32F072 +* Hardware Availability: N/A + +Make example for this keyboard (after setting up your build environment): + + make kopibeng/xt8x:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +* Physical reset button: Press the RESET switch on top side of PCB. +* Bootmagic reset: Unplug keyboard, hold down ESC key and plug in the keyboard. +* Keycode reset: Press the RESET keycode (default: MO(1) + R keys) in layout if available. diff --git a/keyboards/kopibeng/xt8x/rules.mk b/keyboards/kopibeng/xt8x/rules.mk new file mode 100644 index 0000000000..13f7b68bdc --- /dev/null +++ b/keyboards/kopibeng/xt8x/rules.mk @@ -0,0 +1,25 @@ +# MCU name +MCU = STM32F072 + +# Bootloader selection +BOOTLOADER = stm32-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +ENCODER_ENABLE = no # Enable Encoder + +# Enter lower-power sleep mode when on the ChibiOS idle thread +OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/kopibeng/xt8x/xt8x.c b/keyboards/kopibeng/xt8x/xt8x.c new file mode 100644 index 0000000000..7f18277590 --- /dev/null +++ b/keyboards/kopibeng/xt8x/xt8x.c @@ -0,0 +1,43 @@ +/* Copyright 2021 Samuel Lu + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "xt8x.h" + +void matrix_init_kb(void) { + // Initialize indicator LEDs to output + + setPinOutput(LED_CAPS_LOCK_PIN); // Caps + setPinOutput(LED_SCROLL_LOCK_PIN); // Scroll lock + setPinOutput(INDICATOR_PIN_0); // Layer indicator on F13 + + matrix_init_user(); +} + +bool led_update_kb(led_t led_state) { + + bool res = led_update_user(led_state); + + if(res) { + writePin(LED_CAPS_LOCK_PIN, led_state.caps_lock); + writePin(LED_SCROLL_LOCK_PIN, led_state.scroll_lock); + } + return res; +} + +__attribute__((weak)) layer_state_t layer_state_set_user(layer_state_t state) { + writePin(INDICATOR_PIN_0, layer_state_cmp(state, 1)); + return state; +} diff --git a/keyboards/kopibeng/xt8x/xt8x.h b/keyboards/kopibeng/xt8x/xt8x.h new file mode 100644 index 0000000000..4fabf95df1 --- /dev/null +++ b/keyboards/kopibeng/xt8x/xt8x.h @@ -0,0 +1,39 @@ +/* Copyright 2021 Samuel Lu + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +#define ____ KC_NO + + + +#define LAYOUT_all( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K212, K113, K114, K115, K116, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K312, K213, K214, K215, K216, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, \ + K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K415, \ + K500, K501, K502, K506, K510, K511, K512, K513, K514, K515, K416 \ +) { \ + {K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016}, \ + {K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116}, \ + {K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216}, \ + {K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, ____, ____, ____}, \ + {K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, ____, K415, K416}, \ + {K500, K501, K502, ____, ____, ____, K506, ____, ____, ____, K510, K511, K512, K513, K514, K515, ____} \ +} From 02556b3d8adcca4301ba88762e30244accbc0327 Mon Sep 17 00:00:00 2001 From: Vinam Arora Date: Wed, 22 Sep 2021 09:54:14 +0530 Subject: [PATCH 077/595] [Keyboard] 0-Sixty: Splits kb config into base and underglow (#14384) Co-authored-by: Drashna Jaelre --- keyboards/0_sixty/rules.mk | 2 + keyboards/0_sixty/underglow/config.h | 62 +++++++++++++++++++++++++ keyboards/0_sixty/underglow/rules.mk | 1 + keyboards/0_sixty/underglow/underglow.h | 19 ++++++++ 4 files changed, 84 insertions(+) create mode 100644 keyboards/0_sixty/underglow/config.h create mode 100644 keyboards/0_sixty/underglow/rules.mk create mode 100644 keyboards/0_sixty/underglow/underglow.h diff --git a/keyboards/0_sixty/rules.mk b/keyboards/0_sixty/rules.mk index d5df3b592c..51bb5e7354 100644 --- a/keyboards/0_sixty/rules.mk +++ b/keyboards/0_sixty/rules.mk @@ -18,3 +18,5 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output + +LTO_ENABLE = yes # Link-time opt diff --git a/keyboards/0_sixty/underglow/config.h b/keyboards/0_sixty/underglow/config.h new file mode 100644 index 0000000000..5f4ebd4c45 --- /dev/null +++ b/keyboards/0_sixty/underglow/config.h @@ -0,0 +1,62 @@ +/* Copyright 2021 Vinam Arora + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#undef PRODUCT_ID +#define PRODUCT_ID 0x0061 +#undef PRODUCT +#define PRODUCT 0-Sixty-underglow + +/* no caps lock with underglow */ +#undef LED_CAPS_LOCK_PIN + +/* underglow */ +#define RGB_DI_PIN B6 +#define RGBLED_NUM 24 +#define RGBLIGHT_LIMIT_VAL 185 // limit max I to 400mA +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE +#define RGBLIGHT + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +#define NO_DEBUG + +/* disable print */ +#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION diff --git a/keyboards/0_sixty/underglow/rules.mk b/keyboards/0_sixty/underglow/rules.mk new file mode 100644 index 0000000000..84ef473c02 --- /dev/null +++ b/keyboards/0_sixty/underglow/rules.mk @@ -0,0 +1 @@ +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow diff --git a/keyboards/0_sixty/underglow/underglow.h b/keyboards/0_sixty/underglow/underglow.h new file mode 100644 index 0000000000..807dfa84ce --- /dev/null +++ b/keyboards/0_sixty/underglow/underglow.h @@ -0,0 +1,19 @@ +/* Copyright 2021 Vinam Arora + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "0_sixty.h" From c8a3353003bbe706258adc0a4a859b5c2c987cd3 Mon Sep 17 00:00:00 2001 From: Caleb Lightfoot <61706196+Tsquash@users.noreply.github.com> Date: Tue, 21 Sep 2021 23:24:44 -0500 Subject: [PATCH 078/595] [Keyboard] Add Free Willy Keyboard (#14394) Co-authored-by: Ryan --- keyboards/free_willy/config.h | 39 ++++++++++ keyboards/free_willy/free_willy.c | 16 ++++ keyboards/free_willy/free_willy.h | 33 ++++++++ keyboards/free_willy/info.json | 47 ++++++++++++ keyboards/free_willy/keymaps/colemak/config.h | 20 +++++ keyboards/free_willy/keymaps/colemak/keymap.c | 75 +++++++++++++++++++ keyboards/free_willy/keymaps/colemak/rules.mk | 1 + keyboards/free_willy/keymaps/default/config.h | 20 +++++ keyboards/free_willy/keymaps/default/keymap.c | 74 ++++++++++++++++++ keyboards/free_willy/keymaps/default/rules.mk | 1 + keyboards/free_willy/readme.md | 21 ++++++ keyboards/free_willy/rules.mk | 21 ++++++ 12 files changed, 368 insertions(+) create mode 100644 keyboards/free_willy/config.h create mode 100644 keyboards/free_willy/free_willy.c create mode 100644 keyboards/free_willy/free_willy.h create mode 100644 keyboards/free_willy/info.json create mode 100644 keyboards/free_willy/keymaps/colemak/config.h create mode 100644 keyboards/free_willy/keymaps/colemak/keymap.c create mode 100644 keyboards/free_willy/keymaps/colemak/rules.mk create mode 100644 keyboards/free_willy/keymaps/default/config.h create mode 100644 keyboards/free_willy/keymaps/default/keymap.c create mode 100644 keyboards/free_willy/keymaps/default/rules.mk create mode 100644 keyboards/free_willy/readme.md create mode 100644 keyboards/free_willy/rules.mk diff --git a/keyboards/free_willy/config.h b/keyboards/free_willy/config.h new file mode 100644 index 0000000000..cecd2a8211 --- /dev/null +++ b/keyboards/free_willy/config.h @@ -0,0 +1,39 @@ +/* Copyright 2021 Caleb Lightfoot + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x5351 // SQ +#define PRODUCT_ID 0x4657 // FW +#define DEVICE_VER 0x0001 +#define MANUFACTURER squashkb +#define PRODUCT free willy + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 10 + +#define MATRIX_ROW_PINS { F4, F5, F6, F7 } +#define MATRIX_COL_PINS { D3, D2, D1, D0, D4, C6, D7, E6, B4, B5 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 diff --git a/keyboards/free_willy/free_willy.c b/keyboards/free_willy/free_willy.c new file mode 100644 index 0000000000..71a912fdc5 --- /dev/null +++ b/keyboards/free_willy/free_willy.c @@ -0,0 +1,16 @@ +/* Copyright 2021 Caleb Lightfoot + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "free_willy.h" diff --git a/keyboards/free_willy/free_willy.h b/keyboards/free_willy/free_willy.h new file mode 100644 index 0000000000..88597a053d --- /dev/null +++ b/keyboards/free_willy/free_willy.h @@ -0,0 +1,33 @@ +/* Copyright 2021 Caleb Lightfoot + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" + +#define XXX KC_NO + +#define LAYOUT( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \ + K32, K33, K34, K35, K36, K37 \ +) \ +{ \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09 }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19 }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29 }, \ + { XXX, XXX, K32, K33, K34, K35, K36, K37, XXX, XXX } \ +} diff --git a/keyboards/free_willy/info.json b/keyboards/free_willy/info.json new file mode 100644 index 0000000000..c2bb3b95d9 --- /dev/null +++ b/keyboards/free_willy/info.json @@ -0,0 +1,47 @@ +{ + "keyboard_name": "free willy", + "url": "https://www.squashkb.com/product/free-willy", + "maintainer": "tsquash", + "layouts": { + "LAYOUT": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":0, "y":1}, + {"x":1, "y":1}, + {"x":2, "y":1}, + {"x":3, "y":1}, + {"x":4, "y":1}, + {"x":5, "y":1}, + {"x":6, "y":1}, + {"x":7, "y":1}, + {"x":8, "y":1}, + {"x":9, "y":1}, + {"x":0, "y":2}, + {"x":1, "y":2}, + {"x":2, "y":2}, + {"x":3, "y":2}, + {"x":4, "y":2}, + {"x":5, "y":2}, + {"x":6, "y":2}, + {"x":7, "y":2}, + {"x":8, "y":2}, + {"x":9, "y":2}, + {"x":2, "y":3}, + {"x":3, "y":3}, + {"x":4, "y":3}, + {"x":5, "y":3}, + {"x":6, "y":3}, + {"x":7, "y":3} + ] + } + } +} diff --git a/keyboards/free_willy/keymaps/colemak/config.h b/keyboards/free_willy/keymaps/colemak/config.h new file mode 100644 index 0000000000..a9f255d42b --- /dev/null +++ b/keyboards/free_willy/keymaps/colemak/config.h @@ -0,0 +1,20 @@ +/* Copyright 2021 Caleb Lightfoot + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +/* Combos */ +#define COMBO_COUNT 5 +#define COMBO_TERM 50 diff --git a/keyboards/free_willy/keymaps/colemak/keymap.c b/keyboards/free_willy/keymaps/colemak/keymap.c new file mode 100644 index 0000000000..9d666e1bf0 --- /dev/null +++ b/keyboards/free_willy/keymaps/colemak/keymap.c @@ -0,0 +1,75 @@ +/* Copyright 2021 Caleb Lightfoot + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +enum layers{ + _BASE, + _SYM, + _NAV +}; + +#define KC_SYM_SPC LT(_SYM, KC_SPC) + +enum combo_events { + COMBO_NUMBAK, + COMBO_TAB, + COMBO_ESC, + COMBO_DEL, + COMBO_RET, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT( + KC_Q, KC_W, KC_F, KC_P, KC_B, KC_J, KC_L, KC_U, KC_Y, KC_BSPC, + KC_A, KC_R, KC_S, KC_T, KC_G, KC_M, KC_N, KC_E, KC_I, KC_O, + KC_X, KC_C, KC_D, KC_V, KC_Z, KC_K, KC_H, KC_COMM, KC_DOT, KC_SLSH, + KC_LCTL, KC_LSFT, KC_LALT, KC_LGUI , KC_SYM_SPC, MO(_NAV) + ), + + [_SYM] = LAYOUT( + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, + KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_EQUAL, KC_MINS, + KC_BSLS, KC_SCLN, KC_LCBR, KC_LBRC, KC_LPRN, KC_RPRN, KC_RBRC, KC_RCBR, KC_QUOT, KC_GRV, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + [_NAV] = LAYOUT( + RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), +}; + + +#ifdef COMBO_ENABLE +//const uint16_t PROGMEM combo_bspc[] = {KC_O, KC_P, COMBO_END}; +const uint16_t PROGMEM combo_numbak[] = {KC_0, KC_9, COMBO_END}; +const uint16_t PROGMEM combo_tab[] = {KC_F, KC_W, COMBO_END}; +const uint16_t PROGMEM combo_esc[] = {KC_N, KC_T, COMBO_END}; +const uint16_t PROGMEM combo_del[] = {KC_MINS, KC_EQL, COMBO_END}; +const uint16_t PROGMEM combo_ret[] = {KC_LGUI, KC_LALT, COMBO_END}; + +combo_t key_combos[COMBO_COUNT] = { + //[COMBO_BSPC] = COMBO(combo_bspc,KC_BSPC), + [COMBO_NUMBAK] = COMBO(combo_numbak,KC_BSPC), + [COMBO_TAB] = COMBO(combo_tab,KC_TAB), + [COMBO_ESC] = COMBO(combo_esc,KC_ESC), + [COMBO_DEL] = COMBO(combo_del,KC_DEL), + [COMBO_RET] = COMBO(combo_ret,KC_ENTER), + +}; +#endif diff --git a/keyboards/free_willy/keymaps/colemak/rules.mk b/keyboards/free_willy/keymaps/colemak/rules.mk new file mode 100644 index 0000000000..ab1e438182 --- /dev/null +++ b/keyboards/free_willy/keymaps/colemak/rules.mk @@ -0,0 +1 @@ +COMBO_ENABLE = yes diff --git a/keyboards/free_willy/keymaps/default/config.h b/keyboards/free_willy/keymaps/default/config.h new file mode 100644 index 0000000000..a9f255d42b --- /dev/null +++ b/keyboards/free_willy/keymaps/default/config.h @@ -0,0 +1,20 @@ +/* Copyright 2021 Caleb Lightfoot + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +/* Combos */ +#define COMBO_COUNT 5 +#define COMBO_TERM 50 diff --git a/keyboards/free_willy/keymaps/default/keymap.c b/keyboards/free_willy/keymaps/default/keymap.c new file mode 100644 index 0000000000..d2b62a3a1c --- /dev/null +++ b/keyboards/free_willy/keymaps/default/keymap.c @@ -0,0 +1,74 @@ +/* Copyright 2021 Caleb Lightfoot + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +enum layers{ + _BASE, + _SYM, + _NAV +}; + +#define KC_SYM_SPC LT(_SYM, KC_SPC) +#define KC_SFT_BCK LSFT_T(KC_BSPC) + + +enum combo_events { + COMBO_NUMBAK, + COMBO_TAB, + COMBO_ESC, + COMBO_DEL, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT( + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, + KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT, + KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, + KC_LCTL, KC_SFT_BCK, KC_LALT, KC_LGUI , KC_SYM_SPC, MO(_NAV) + ), + + [_SYM] = LAYOUT( + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, + KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_EQUAL, KC_MINS, + KC_BSLS, KC_SCLN, KC_LCBR, KC_LBRC, KC_LPRN, KC_RPRN, KC_RBRC, KC_RCBR, KC_QUOT, KC_GRV, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + [_NAV] = LAYOUT( + RESET, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), +}; + + +#ifdef COMBO_ENABLE +//const uint16_t PROGMEM combo_bspc[] = {KC_O, KC_P, COMBO_END}; +const uint16_t PROGMEM combo_numbak[] = {KC_0, KC_9, COMBO_END}; +const uint16_t PROGMEM combo_tab[] = {KC_Q, KC_W, COMBO_END}; +const uint16_t PROGMEM combo_esc[] = {KC_J, KC_F, COMBO_END}; +const uint16_t PROGMEM combo_del[] = {KC_MINS, KC_EQL, COMBO_END}; + +combo_t key_combos[COMBO_COUNT] = { + //[COMBO_BSPC] = COMBO(combo_bspc,KC_BSPC), + [COMBO_NUMBAK] = COMBO(combo_numbak,KC_BSPC), + [COMBO_TAB] = COMBO(combo_tab,KC_TAB), + [COMBO_ESC] = COMBO(combo_esc,KC_ESC), + [COMBO_DEL] = COMBO(combo_del,KC_DEL), + +}; +#endif diff --git a/keyboards/free_willy/keymaps/default/rules.mk b/keyboards/free_willy/keymaps/default/rules.mk new file mode 100644 index 0000000000..ab1e438182 --- /dev/null +++ b/keyboards/free_willy/keymaps/default/rules.mk @@ -0,0 +1 @@ +COMBO_ENABLE = yes diff --git a/keyboards/free_willy/readme.md b/keyboards/free_willy/readme.md new file mode 100644 index 0000000000..0b34cc712c --- /dev/null +++ b/keyboards/free_willy/readme.md @@ -0,0 +1,21 @@ +# Free Willy + +![Free Willy](https://i.imgur.com/JBNV3Hk.png) + +Free willy is an ortholinear, 36 key keyboard featuring HHKB like corner blockers. + +* Keyboard Maintainer: [Caleb Lightfoot](https://github.com/Tsquash) +* Hardware Supported: Free Willy PCB v1.0 +* Hardware Availability: [squashkb](https://www.squashkb.com/product/free-willy) + +Make example for this keyboard (after setting up your build environment): + + make free_willy:default + +To reset the keyboard, jump the reset and ground pins located on the pro micro. + +Flashing example for this keyboard: + + make free_willy:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/free_willy/rules.mk b/keyboards/free_willy/rules.mk new file mode 100644 index 0000000000..45b153a573 --- /dev/null +++ b/keyboards/free_willy/rules.mk @@ -0,0 +1,21 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = caterina + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output From 9c564b6a5fc249af397e1c1b0ec237a2629072e8 Mon Sep 17 00:00:00 2001 From: Brandon Claveria <48102030+swiftrax@users.noreply.github.com> Date: Tue, 21 Sep 2021 21:25:59 -0700 Subject: [PATCH 079/595] [Keyboard] Add Dango40 (#14437) Co-authored-by: Drashna Jaelre Co-authored-by: Swiftrax Co-authored-by: Swiftrax --- keyboards/onekeyco/dango40/config.h | 50 ++++ keyboards/onekeyco/dango40/dango40.c | 27 ++ keyboards/onekeyco/dango40/dango40.h | 33 +++ keyboards/onekeyco/dango40/info.json | 263 ++++++++++++++++++ .../onekeyco/dango40/keymaps/default/keymap.c | 38 +++ .../onekeyco/dango40/keymaps/via/keymap.c | 50 ++++ .../onekeyco/dango40/keymaps/via/rules.mk | 1 + keyboards/onekeyco/dango40/readme.md | 18 ++ keyboards/onekeyco/dango40/rules.mk | 22 ++ 9 files changed, 502 insertions(+) create mode 100644 keyboards/onekeyco/dango40/config.h create mode 100644 keyboards/onekeyco/dango40/dango40.c create mode 100644 keyboards/onekeyco/dango40/dango40.h create mode 100644 keyboards/onekeyco/dango40/info.json create mode 100644 keyboards/onekeyco/dango40/keymaps/default/keymap.c create mode 100644 keyboards/onekeyco/dango40/keymaps/via/keymap.c create mode 100644 keyboards/onekeyco/dango40/keymaps/via/rules.mk create mode 100644 keyboards/onekeyco/dango40/readme.md create mode 100644 keyboards/onekeyco/dango40/rules.mk diff --git a/keyboards/onekeyco/dango40/config.h b/keyboards/onekeyco/dango40/config.h new file mode 100644 index 0000000000..fceb8fb252 --- /dev/null +++ b/keyboards/onekeyco/dango40/config.h @@ -0,0 +1,50 @@ +/* +Copyright 2021 Swiftrax + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x04D8 +#define PRODUCT_ID 0xE9B9 +#define DEVICE_VER 0x0001 +#define MANUFACTURER One Key Company +#define PRODUCT Dango40 +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 13 + +// ROWS: Top to bottom, COLS: Left to right + +#define MATRIX_ROW_PINS { F4, F1, F0, C6 } +#define MATRIX_COL_PINS { F7, F6, F5, D3, D5, D4, D6, D7, B4, B5, B6, C7, B0 } + +#define ENCODERS_PAD_A { D2 } +#define ENCODERS_PAD_B { D1 } + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/*EEPROM for via*/ +#define DYNAMIC_KEYMAP_LAYER_COUNT 5 \ No newline at end of file diff --git a/keyboards/onekeyco/dango40/dango40.c b/keyboards/onekeyco/dango40/dango40.c new file mode 100644 index 0000000000..8ca77545bf --- /dev/null +++ b/keyboards/onekeyco/dango40/dango40.c @@ -0,0 +1,27 @@ +/* +Copyright 2021 Swiftrax + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include "dango40.h" + +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + if (clockwise) { + tap_code_delay(KC_VOLU, 10); + } else { + tap_code_delay(KC_VOLD, 10); + } + return true; +} diff --git a/keyboards/onekeyco/dango40/dango40.h b/keyboards/onekeyco/dango40/dango40.h new file mode 100644 index 0000000000..9caa624528 --- /dev/null +++ b/keyboards/onekeyco/dango40/dango40.h @@ -0,0 +1,33 @@ +/* +Copyright 2021 Swiftrax + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#pragma once + +#define ___ KC_NO + +#include "quantum.h" + +#define LAYOUT_all( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ + K30, K31, K32, K34, K36, K37, K39, K3A, K3B \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, }, \ + { K30, K31, K32, ___, K34, ___, K36, K37, ___, K39, K3A, K3B, ___, } \ +} diff --git a/keyboards/onekeyco/dango40/info.json b/keyboards/onekeyco/dango40/info.json new file mode 100644 index 0000000000..188cc7473d --- /dev/null +++ b/keyboards/onekeyco/dango40/info.json @@ -0,0 +1,263 @@ +{ + "keyboard_name":"Dango40", + "url":"https://github.com/swiftrax", + "maintainer":"Swiftrax", + "layouts":{ + "LAYOUT":{ + "layout_all":[ + { + "label":"0,0", + "x":0, + "y":0 + }, + { + "label":"0,1", + "x":1, + "y":0 + }, + { + "label":"0,2", + "x":2, + "y":0 + }, + { + "label":"0,3", + "x":3, + "y":0 + }, + { + "label":"0,4", + "x":4, + "y":0 + }, + { + "label":"0,5", + "x":5, + "y":0 + }, + { + "label":"0,6", + "x":6, + "y":0 + }, + { + "label":"0,7", + "x":7, + "y":0 + }, + { + "label":"0,8", + "x":8, + "y":0 + }, + { + "label":"0,9", + "x":9, + "y":0 + }, + { + "label":"0,10", + "x":10, + "y":0 + }, + { + "label":"0,11", + "x":11, + "y":0, + "w":1.75 + }, + { + "label":"0,12", + "x":12.75, + "y":0 + }, + { + "label":"1,0", + "x":0, + "y":1, + "w":1.25 + }, + { + "label":"1,1", + "x":1.25, + "y":1 + }, + { + "label":"1,2", + "x":2.25, + "y":1 + }, + { + "label":"1,3", + "x":3.25, + "y":1 + }, + { + "label":"1,4", + "x":4.25, + "y":1 + }, + { + "label":"1,5", + "x":5.25, + "y":1 + }, + { + "label":"1,6", + "x":6.25, + "y":1 + }, + { + "label":"1,7", + "x":7.25, + "y":1 + }, + { + "label":"1,8", + "x":8.25, + "y":1 + }, + { + "label":"1,9", + "x":9.25, + "y":1 + }, + { + "label":"1,10", + "x":10.25, + "y":1 + }, + { + "label":"1,11", + "x":11.25, + "y":1, + "w":1.5 + }, + { + "label":"1,12", + "x":12.75, + "y":1 + }, + { + "label":"2,0", + "x":0, + "y":2, + "w":1.75 + }, + { + "label":"2,1", + "x":1.75, + "y":2 + }, + { + "label":"2,2", + "x":2.75, + "y":2 + }, + { + "label":"2,3", + "x":3.75, + "y":2 + }, + { + "label":"2,4", + "x":4.75, + "y":2 + }, + { + "label":"2,5", + "x":5.75, + "y":2 + }, + { + "label":"2,6", + "x":6.75, + "y":2 + }, + { + "label":"2,7", + "x":7.75, + "y":2 + }, + { + "label":"2,8", + "x":8.75, + "y":2 + }, + { + "label":"2,9", + "x":9.75, + "y":2 + }, + { + "label":"2,10", + "x":10.75, + "y":2 + }, + { + "label":"2,11", + "x":11.75, + "y":2 + }, + { + "label":"2,12", + "x":12.75, + "y":2 + }, + { + "label":"3,0", + "x":0, + "y":3, + "w":1.25 + }, + { + "label":"3,1", + "x":1.25, + "y":3, + "w":1.5 + }, + { + "label":"3,2", + "x":2.75, + "y":3, + "w":1.25 + }, + { + "label":"3,4", + "x":4, + "y":3, + "w":2.25 + }, + { + "label":"3,6", + "x":6.25, + "y":3, + "w":2.75 + }, + { + "label":"3,7", + "x":9, + "y":3, + "w":1.25 + }, + { + "label":"3,9", + "x":10.25, + "y":3, + "w":1.25 + }, + { + "label":"3,10", + "x":11.5, + "y":3, + "w":1.25 + }, + { + "label":"3,11", + "x":12.75, + "y":3 + } + ] + } + } +} \ No newline at end of file diff --git a/keyboards/onekeyco/dango40/keymaps/default/keymap.c b/keyboards/onekeyco/dango40/keymaps/default/keymap.c new file mode 100644 index 0000000000..4bed789d0c --- /dev/null +++ b/keyboards/onekeyco/dango40/keymaps/default/keymap.c @@ -0,0 +1,38 @@ +/* +Copyright 2021 Swiftrax + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_all( + KC_GESC, KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , KC_BSPC, KC_MUTE, + KC_TAB , KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L , KC_SCLN, KC_ENT , KC_PGUP, + KC_LSFT, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC , KC_SPC , KC_RALT, KC_RCTL, MO(1) , KC_RGHT + ), + [1] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ +), + [2] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/onekeyco/dango40/keymaps/via/keymap.c b/keyboards/onekeyco/dango40/keymaps/via/keymap.c new file mode 100644 index 0000000000..5c13bcee86 --- /dev/null +++ b/keyboards/onekeyco/dango40/keymaps/via/keymap.c @@ -0,0 +1,50 @@ +/* +Copyright 2021 Swiftrax + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_all( + KC_GESC, KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , KC_BSPC, KC_MUTE, + KC_TAB , KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L , KC_SCLN, KC_ENT , KC_PGUP, + KC_LSFT, KC_Z , KC_X , KC_C , KC_V , KC_B , KC_N , KC_M , KC_COMM, KC_DOT , KC_SLSH, KC_RSFT, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC , KC_SPC , KC_RALT, KC_RCTL, MO(1) , KC_RGHT + ), + [1] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [2] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [3] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [4] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/onekeyco/dango40/keymaps/via/rules.mk b/keyboards/onekeyco/dango40/keymaps/via/rules.mk new file mode 100644 index 0000000000..036bd6d1c3 --- /dev/null +++ b/keyboards/onekeyco/dango40/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes \ No newline at end of file diff --git a/keyboards/onekeyco/dango40/readme.md b/keyboards/onekeyco/dango40/readme.md new file mode 100644 index 0000000000..4b12f55957 --- /dev/null +++ b/keyboards/onekeyco/dango40/readme.md @@ -0,0 +1,18 @@ +# Dango40 + +40% keyboard + +* Keyboard Maintainer: Swiftrax +* Hardware Supported: Dango40 +* Hardware Availability: Dango40 PCB + +## Bootloader Enter the bootloader in 3 ways: + * **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard + * **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead + * **Keycode in layout**: Press the key mapped to `RESET` if it is available + +Make example for flashing this keyboard (after setting up your build environment): + + make onekeyco/dango40:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/onekeyco/dango40/rules.mk b/keyboards/onekeyco/dango40/rules.mk new file mode 100644 index 0000000000..898b0f4440 --- /dev/null +++ b/keyboards/onekeyco/dango40/rules.mk @@ -0,0 +1,22 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +ENCODER_ENABLE = yes # Enable encoder \ No newline at end of file From ea5735b0741764acab905e1137dab9de1e3cf5a6 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Tue, 21 Sep 2021 22:39:19 -0700 Subject: [PATCH 080/595] [Keyboard] Fix font file for Ein 60 Keyboard (#14553) --- keyboards/ein_60/glcdfont.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/keyboards/ein_60/glcdfont.c b/keyboards/ein_60/glcdfont.c index f9984b62ca..b53b0918f5 100644 --- a/keyboards/ein_60/glcdfont.c +++ b/keyboards/ein_60/glcdfont.c @@ -5,7 +5,7 @@ #include "progmem.h" -static const char PROGMEM font[] = { +static const unsigned char PROGMEM font[] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00, 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00, From 5ddbabfa2a8ee7ce75dcbc30397eb5d588f9e51d Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Tue, 21 Sep 2021 22:51:54 -0700 Subject: [PATCH 081/595] [Keyboard] Fix jkb65 compile issues (#14554) --- keyboards/jadookb/jkb65/config.h | 48 +++++------ keyboards/jadookb/jkb65/info.json | 10 +-- keyboards/jadookb/jkb65/jkb65.c | 80 ++++--------------- .../jadookb/jkb65/keymaps/default/keymap.c | 39 +++++---- keyboards/jadookb/jkb65/keymaps/via/keymap.c | 39 +++++---- 5 files changed, 79 insertions(+), 137 deletions(-) diff --git a/keyboards/jadookb/jkb65/config.h b/keyboards/jadookb/jkb65/config.h index 7ad707252e..8af9b04fc8 100644 --- a/keyboards/jadookb/jkb65/config.h +++ b/keyboards/jadookb/jkb65/config.h @@ -1,24 +1,24 @@ - /* Copyright 2021 Wizad-GG - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ + /* Copyright 2021 Wizad-GG + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ #pragma once #include "config_common.h" -#define VENDOR_ID 0x4A4B +#define VENDOR_ID 0x4A4B #define PRODUCT_ID 0xEF6A #define DEVICE_VER 0x0001 #define MANUFACTURER JadooKB @@ -37,18 +37,11 @@ #define RGB_DI_PIN F0 #define DRIVER_LED_TOTAL 67 -#ifdef RGB_DI_PIN - #define RGBLED_NUM 67 - #define RGB_DISABLE_WHEN_USB_SUSPENDED - #define RGB_MATRIX_FRAMEBUFFER_EFFECTS - #define RGB_MATRIX_KEYPRESSES - #define RGBLIGHT_EFFECT_RAINBOW_MOOD - #define RGBLIGHT_SLEEP - #define RGB_DISABLE_TIMEOUT 0 - #define RGB_DISABLE_AFTER_TIMEOUT 0 - #define RGBLIGHT_TIMEOUT 60000 -#endif +#define RGB_DISABLE_WHEN_USB_SUSPENDED +#define RGB_MATRIX_FRAMEBUFFER_EFFECTS +#define RGB_MATRIX_KEYPRESSES +#define RGB_DISABLE_TIMEOUT 60000 #define DEBOUNCE 5 @@ -57,4 +50,3 @@ #define NO_ACTION_MACRO #define NO_ACTION_FUNCTION - diff --git a/keyboards/jadookb/jkb65/info.json b/keyboards/jadookb/jkb65/info.json index 6d1953834f..8bb0ab7524 100644 --- a/keyboards/jadookb/jkb65/info.json +++ b/keyboards/jadookb/jkb65/info.json @@ -1,10 +1,10 @@ { - "keyboard_name": "jkb65", - "url": "https://jadookb.com/", - "maintainer": "Wizard-GG", + "keyboard_name": "jkb65", + "url": "https://jadookb.com/", + "maintainer": "Wizard-GG", "layouts": { - "LAYOUT": { + "LAYOUT_67_ansi": { "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"~", "x":15, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Delete", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"PgUp", "x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"PgDn", "x":15, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Fn", "x":10, "y":4, "w":1.25}, {"label":"Menu", "x":11.25, "y":4, "w":1.25}, {"label":"\u2190", "x":13, "y":4}, {"label":"\u2193", "x":14, "y":4}, {"label":"\u2192", "x":15, "y":4}] } } -} \ No newline at end of file +} diff --git a/keyboards/jadookb/jkb65/jkb65.c b/keyboards/jadookb/jkb65/jkb65.c index 1f22b30a79..aabdce7d20 100644 --- a/keyboards/jadookb/jkb65/jkb65.c +++ b/keyboards/jadookb/jkb65/jkb65.c @@ -1,17 +1,17 @@ - /* Copyright 2021 Wizard-GG - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . + /* Copyright 2021 Wizard-GG + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ #include "jkb65.h" @@ -32,7 +32,7 @@ led_config_t g_led_config = { { { 6, 32}, { 26, 32}, { 41, 32}, { 56, 32}, { 71, 32}, { 86, 32}, {101, 32}, {116, 32}, {131, 32}, {146, 32}, {161, 32}, {176, 32}, {201, 32}, {225, 32}, // Capslock, A, S, D, F, G, H, J, K, L, ;, ', Enter, Page up { 9, 48}, { 34, 48}, { 49, 48}, { 64, 48}, { 79, 48}, { 94, 48}, {109, 48}, {124, 48}, {139, 48}, {154, 48}, {169, 48}, {189, 48}, {208, 48}, {225, 48}, // LShift, Z, X, C, V, B, N, M, ,, ., /, Shift, Up, Page Down { 2, 64}, { 21, 64}, { 39, 64}, { 94, 64}, {148, 64}, {163, 64}, {193, 64}, {208, 64}, {225, 64}, // Ctrl, GUI, Alt, Space, RAlt, FN, Ctrl, Left, Down, Right - + }, { // LED Index to Flag 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, // Esc, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, -, =, Backspace, Delete @@ -40,56 +40,8 @@ led_config_t g_led_config = { { 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, // Capslock, A, S, D, F, G, H, J, K, L, ;, ', Enter, Page up 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 1, // LShift, Z, X, C, V, B, N, M, ,, ., /, Shift, Up, Page Down 1, 1, 1, 4, 1, 1, 1, 1, 1, // Ctrl, GUI, Alt, Space, Alt, FN, Left, Down, Right - -} }; - -static uint16_t key_timer; -static void refresh_rgb(void); -static void check_rgb_timeout(void); -bool is_rgb_timeout = false; - - -void refresh_rgb() { - key_timer = timer_read(); - if (is_rgb_timeout) { - - is_rgb_timeout = false; - rgblight_wakeup(); - } -} - -void check_rgb_timeout() { - if (!is_rgb_timeout && timer_elapsed(key_timer) > RGBLIGHT_TIMEOUT) { - rgblight_suspend(); - is_rgb_timeout = true; - } -} - - - -void housekeeping_task_kb(void) { - #ifdef RGBLIGHT_TIMEOUT - check_rgb_timeout(); - #endif - -} - -void post_process_record_kb(uint16_t keycode, keyrecord_t *record) { -#ifdef RGBLIGHT_TIMEOUT - if (record->event.pressed) { refresh_rgb(); } -#endif - post_process_record_user(keycode, record); -} - -bool encoder_update_kb(uint8_t index, bool clockwise) { -#ifdef RGBLIGHT_TIMEOUT - refresh_rgb(); -#endif - - return encoder_update_user(index, clockwise); -} - +} }; __attribute__ ((weak)) diff --git a/keyboards/jadookb/jkb65/keymaps/default/keymap.c b/keyboards/jadookb/jkb65/keymaps/default/keymap.c index e866ef597f..9a01fb6165 100644 --- a/keyboards/jadookb/jkb65/keymaps/default/keymap.c +++ b/keyboards/jadookb/jkb65/keymaps/default/keymap.c @@ -1,47 +1,47 @@ /* Copyright 2021 Wizard-GG - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - [0] = LAYOUT( + + [0] = LAYOUT_67_ansi( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_TILD, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ), - [1] = LAYOUT( + [1] = LAYOUT_67_ansi( KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_PSCR, _______, RGB_RMOD, _______, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAI, _______, MAGIC_UNNO_GUI,MAGIC_NO_GUI, _______, RGB_TOG, _______, MO(2), RGB_SPD, RGB_VAD, RGB_SPI ), - [2] = LAYOUT( + [2] = LAYOUT_67_ansi( RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), - [3] = LAYOUT( + [3] = LAYOUT_67_ansi( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, @@ -49,4 +49,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______ ), }; - diff --git a/keyboards/jadookb/jkb65/keymaps/via/keymap.c b/keyboards/jadookb/jkb65/keymaps/via/keymap.c index e866ef597f..9a01fb6165 100644 --- a/keyboards/jadookb/jkb65/keymaps/via/keymap.c +++ b/keyboards/jadookb/jkb65/keymaps/via/keymap.c @@ -1,47 +1,47 @@ /* Copyright 2021 Wizard-GG - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - - [0] = LAYOUT( + + [0] = LAYOUT_67_ansi( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_TILD, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ), - [1] = LAYOUT( + [1] = LAYOUT_67_ansi( KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_PSCR, _______, RGB_RMOD, _______, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAI, _______, MAGIC_UNNO_GUI,MAGIC_NO_GUI, _______, RGB_TOG, _______, MO(2), RGB_SPD, RGB_VAD, RGB_SPI ), - [2] = LAYOUT( + [2] = LAYOUT_67_ansi( RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), - [3] = LAYOUT( + [3] = LAYOUT_67_ansi( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, @@ -49,4 +49,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______ ), }; - From c78a057ec4f3da9487f5fcce29a35785c930e17c Mon Sep 17 00:00:00 2001 From: Sets3n <76554585+Sets3n@users.noreply.github.com> Date: Wed, 22 Sep 2021 14:38:07 +0800 Subject: [PATCH 082/595] [Keyboard] add kk980 keyboard (#14436) --- keyboards/sets3n/kk980/config.h | 103 ++++++++++++++++ keyboards/sets3n/kk980/info.json | 116 ++++++++++++++++++ .../sets3n/kk980/keymaps/default/keymap.c | 91 ++++++++++++++ keyboards/sets3n/kk980/keymaps/via/keymap.c | 91 ++++++++++++++ keyboards/sets3n/kk980/keymaps/via/rules.mk | 1 + keyboards/sets3n/kk980/kk980.c | 17 +++ keyboards/sets3n/kk980/kk980.h | 34 +++++ keyboards/sets3n/kk980/readme.md | 31 +++++ keyboards/sets3n/kk980/rules.mk | 21 ++++ 9 files changed, 505 insertions(+) create mode 100644 keyboards/sets3n/kk980/config.h create mode 100644 keyboards/sets3n/kk980/info.json create mode 100644 keyboards/sets3n/kk980/keymaps/default/keymap.c create mode 100644 keyboards/sets3n/kk980/keymaps/via/keymap.c create mode 100644 keyboards/sets3n/kk980/keymaps/via/rules.mk create mode 100644 keyboards/sets3n/kk980/kk980.c create mode 100644 keyboards/sets3n/kk980/kk980.h create mode 100644 keyboards/sets3n/kk980/readme.md create mode 100644 keyboards/sets3n/kk980/rules.mk diff --git a/keyboards/sets3n/kk980/config.h b/keyboards/sets3n/kk980/config.h new file mode 100644 index 0000000000..016ab0d460 --- /dev/null +++ b/keyboards/sets3n/kk980/config.h @@ -0,0 +1,103 @@ +/* Copyright 2021 Sets3n + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x404A +#define PRODUCT_ID 0x0002 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Sets3n +#define PRODUCT kk980 + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 17 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ + +/* key matrix pins */ +#define MATRIX_ROW_PINS { B2, B3, D3, D4, D5, D6 } +#define MATRIX_COL_PINS { E6, F0, F1, F4, F5, F6, F7, C7, C6, B6, B5, B4, D7, B1, B0, D0, D1 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* number of backlight levels */ + +#ifdef BACKLIGHT_PIN +#define BACKLIGHT_LEVELS 8 +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE + +#define RGB_DI_PIN B7 +#ifdef RGB_DI_PIN +#define RGBLED_NUM 102 +#define RGBLIGHT_LED_MAP { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11,\ + 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, \ + 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, \ + 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, \ + 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, \ + 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, \ + 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, \ + 96, 97, 98, 99, 100, 101, 102 } // 1 --> ScollLock 2 --> CapsLock 3 --> Bluetooth 4 --> NumLock +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 +#define RGBLIGHT_LIMIT_VAL 230 +#define RGBLIGHT_LAYERS +#define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF +#endif + +#ifdef RGB_MATRIX_ENABLE +#define DRIVER_LED_TOTAL RGBLED_NUM +#define RGB_MATRIX_KEYPRESSES +#endif + +#define BOOTMAGIC_LITE_ROW 0 +#define BOOTMAGIC_LITE_COLUMN 0 + diff --git a/keyboards/sets3n/kk980/info.json b/keyboards/sets3n/kk980/info.json new file mode 100644 index 0000000000..e6622d14bf --- /dev/null +++ b/keyboards/sets3n/kk980/info.json @@ -0,0 +1,116 @@ +{ + "keyboard_name": "kk980", + "url": "https://i.imgur.com/MQA6FXb.jpg", + "maintainer": "Sets3n", + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"ESC", "x": 0, "y": 0}, + {"label":"F1", "x": 2, "y": 0}, + {"label":"F2", "x": 3, "y": 0}, + {"label":"F3", "x": 4, "y": 0}, + {"label":"F4", "x": 5, "y": 0}, + {"label":"F5", "x": 6.5, "y": 0}, + {"label":"F6", "x": 7.5, "y": 0}, + {"label":"F7", "x": 8.5, "y": 0}, + {"label":"F8", "x": 9.5, "y": 0}, + {"label":"F9", "x": 11, "y": 0}, + {"label":"F10", "x": 12, "y": 0}, + {"label":"F11", "x": 13, "y": 0}, + {"label":"F12", "x": 14, "y": 0}, + {"label":"DEL", "x": 15.5, "y": 0}, + {"label":"INSERT", "x": 16.5, "y": 0}, + {"label":"PGUP", "x": 17.5, "y": 0}, + {"label":"PGDN", "x": 18.5, "y": 0}, + + {"label":"`~", "x": 0, "y": 1.5}, + {"label":"1!", "x": 1, "y": 1.5}, + {"label":"2@", "x": 2, "y": 1.5}, + {"label":"3#", "x": 3, "y": 1.5}, + {"label":"4$", "x": 4, "y": 1.5}, + {"label":"5%", "x": 5, "y": 1.5}, + {"label":"6^", "x": 6, "y": 1.5}, + {"label":"7&", "x": 7, "y": 1.5}, + {"label":"8*", "x": 8, "y": 1.5}, + {"label":"9(", "x": 9, "y": 1.5}, + {"label":"0)", "x": 10, "y": 1.5}, + {"label":"-_", "x": 11, "y": 1.5}, + {"label":"+=", "x": 12, "y": 1.5}, + {"label":"BS", "x": 13, "y": 1.5, "w": 2}, + {"label":"NUML", "x": 15.5, "y": 1.5}, + {"label":"/", "x": 16.5, "y": 1.5}, + {"label":"*", "x": 17.5, "y": 1.5}, + {"label":"-", "x": 18.5, "y": 1.5}, + + {"label":"TAB", "x": 0, "y": 2.5, "w": 1.5}, + {"label":"Q", "x": 1.5, "y": 2.5}, + {"label":"W", "x": 2.5, "y": 2.5}, + {"label":"E", "x": 3.5, "y": 2.5}, + {"label":"R", "x": 4.5, "y": 2.5}, + {"label":"T", "x": 5.5, "y": 2.5}, + {"label":"Y", "x": 6.5, "y": 2.5}, + {"label":"U", "x": 7.5, "y": 2.5}, + {"label":"I", "x": 8.5, "y": 2.5}, + {"label":"O", "x": 9.5, "y": 2.5}, + {"label":"P", "x": 10.5, "y": 2.5}, + {"label":"[{", "x": 11.5, "y": 2.5}, + {"label":"]}", "x": 12.5, "y": 2.5}, + {"label":"\\|", "x": 13.5, "y": 2.5, "w": 1.5}, + {"label":"7", "x": 15.5, "y": 2.5}, + {"label":"8", "x": 16.5, "y": 2.5}, + {"label":"9", "x": 17.5, "y": 2.5}, + + {"label":"CAPS", "x": 0, "y": 3.5, "w": 1.75}, + {"label":"A", "x": 1.75, "y": 3.5}, + {"label":"S", "x": 2.75, "y": 3.5}, + {"label":"D", "x": 3.75, "y": 3.5}, + {"label":"F", "x": 4.75, "y": 3.5}, + {"label":"G", "x": 5.75, "y": 3.5}, + {"label":"H", "x": 6.75, "y": 3.5}, + {"label":"J", "x": 7.75, "y": 3.5}, + {"label":"K", "x": 8.75, "y": 3.5}, + {"label":"L", "x": 9.75, "y": 3.5}, + {"label":";:", "x": 10.75, "y": 3.5}, + {"label":"'\"", "x": 11.75, "y": 3.5}, + {"label":"RETURN", "x": 12.75, "y": 3.5, "w": 2.25}, + {"label":"4", "x": 15.5, "y": 3.5, "w": 1.5}, + {"label":"5", "x": 16.5, "y": 3.5}, + {"label":"6", "x": 17.5, "y": 3.5}, + {"label":"+", "x": 18.5, "y": 3.5, "h": 2}, + + {"label":"LSHIFT", "x": 0, "y": 4.5, "w": 2.25}, + {"label":"Z", "x": 2.25, "y": 4.5}, + {"label":"X", "x": 3.25, "y": 4.5}, + {"label":"C", "x": 4.25, "y": 4.5}, + {"label":"V", "x": 5.25, "y": 4.5}, + {"label":"B", "x": 6.25, "y": 4.5}, + {"label":"N", "x": 7.25, "y": 4.5}, + {"label":"M", "x": 8.25, "y": 4.5}, + {"label":",<", "x": 9.25, "y": 4.5}, + {"label":".>", "x": 10.25, "y": 4.5}, + {"label":"/?", "x": 11.25, "y": 4.5}, + {"label":"RSHIFT", "x": 12.25, "y": 4.5, "w": 1.75}, + {"label":"up", "x": 14.25, "y": 4.75}, + {"label":"1", "x": 15.5, "y": 4.5}, + {"label":"2", "x": 16.5, "y": 4.5}, + {"label":"3", "x": 17.5, "y": 4.5}, + + {"label":"LCTRL", "x": 0, "y": 5.5, "w": 1.25}, + {"label":"LWIN", "x": 1.25, "y": 5.5}, + {"label":"LALT", "x": 2.25, "y": 5.5, "w": 1.25}, + {"label":"SPACE", "x": 3.25, "y": 5.5, "w": 6.25}, + {"label":"RALT", "x": 9.5, "y": 5.5}, + {"label":"FN", "x": 10.5, "y": 5.5}, + {"label":"RCTRL", "x": 11.5, "y": 5.5, "w": 1.25}, + {"label":"LEFT", "x": 13, "y": 5.75}, + {"label":"DOWN", "x": 14, "y": 5.75}, + {"label":"RIGHT", "x": 15, "y": 5.75}, + {"label":"0", "x": 16.5, "y": 5.5}, + {"label":".DEL", "x": 17.5, "y": 5.5, "w": 2.75}, + {"label":"ENTER", "x": 18.5, "y": 5.5, "h": 2} + + ] + } + } +} + diff --git a/keyboards/sets3n/kk980/keymaps/default/keymap.c b/keyboards/sets3n/kk980/keymaps/default/keymap.c new file mode 100644 index 0000000000..171cdb2127 --- /dev/null +++ b/keyboards/sets3n/kk980/keymaps/default/keymap.c @@ -0,0 +1,91 @@ +/* Copyright 2021 Sets3n + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_INS, KC_PGDN, KC_PGUP, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_P7, KC_P8, KC_P9, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_BSPC, KC_BSLS, KC_RALT, KC_RGUI, MO(1), KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT), + + [1] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, BL_TOGG, BL_DEC, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + +}; + + +//以下是RGB灯作为层切换指示 +const rgblight_segment_t PROGMEM my_scroll_layer[] = RGBLIGHT_LAYER_SEGMENTS( + {1, 1, HSV_CYAN} +); + +const rgblight_segment_t PROGMEM my_capslock_layer[] = RGBLIGHT_LAYER_SEGMENTS( + {2, 1, HSV_MAGENTA}, + {56, 1, HSV_CYAN} +); + + +const rgblight_segment_t PROGMEM my_bluetooth_layer[] = RGBLIGHT_LAYER_SEGMENTS( + {3, 1, HSV_WHITE} +); + +const rgblight_segment_t PROGMEM my_numlocak_layer[] = RGBLIGHT_LAYER_SEGMENTS( + {4, 1, HSV_GREEN}, + {35, 1, HSV_RED} +); + +// Define the array of layers. Later layers take precedence +const rgblight_segment_t* const PROGMEM my_rgb_layers[] = RGBLIGHT_LAYERS_LIST( + my_scroll_layer, + my_capslock_layer, + my_bluetooth_layer, + my_numlocak_layer +); + +void keyboard_post_init_user(void){ + //Enable the LED layers + rgblight_layers = my_rgb_layers; +} + +// Enabling and disabling lighting layers +layer_state_t layer_state_set_user(layer_state_t state) { + // Both layers will light up if both kb layers are active + rgblight_set_layer_state(0, layer_state_cmp(state, 0)); + rgblight_set_layer_state(1, layer_state_cmp(state, 1)); + rgblight_set_layer_state(3, layer_state_cmp(state, 3)); + + return state; +} + +bool led_update_user(led_t led_state) { + rgblight_set_layer_state(0, led_state.scroll_lock); + rgblight_set_layer_state(1, led_state.caps_lock); + rgblight_set_layer_state(3, led_state.num_lock); + + return true; +} + diff --git a/keyboards/sets3n/kk980/keymaps/via/keymap.c b/keyboards/sets3n/kk980/keymaps/via/keymap.c new file mode 100644 index 0000000000..171cdb2127 --- /dev/null +++ b/keyboards/sets3n/kk980/keymaps/via/keymap.c @@ -0,0 +1,91 @@ +/* Copyright 2021 Sets3n + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_INS, KC_PGDN, KC_PGUP, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_P7, KC_P8, KC_P9, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_BSPC, KC_BSLS, KC_RALT, KC_RGUI, MO(1), KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT), + + [1] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, BL_TOGG, BL_DEC, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + +}; + + +//以下是RGB灯作为层切换指示 +const rgblight_segment_t PROGMEM my_scroll_layer[] = RGBLIGHT_LAYER_SEGMENTS( + {1, 1, HSV_CYAN} +); + +const rgblight_segment_t PROGMEM my_capslock_layer[] = RGBLIGHT_LAYER_SEGMENTS( + {2, 1, HSV_MAGENTA}, + {56, 1, HSV_CYAN} +); + + +const rgblight_segment_t PROGMEM my_bluetooth_layer[] = RGBLIGHT_LAYER_SEGMENTS( + {3, 1, HSV_WHITE} +); + +const rgblight_segment_t PROGMEM my_numlocak_layer[] = RGBLIGHT_LAYER_SEGMENTS( + {4, 1, HSV_GREEN}, + {35, 1, HSV_RED} +); + +// Define the array of layers. Later layers take precedence +const rgblight_segment_t* const PROGMEM my_rgb_layers[] = RGBLIGHT_LAYERS_LIST( + my_scroll_layer, + my_capslock_layer, + my_bluetooth_layer, + my_numlocak_layer +); + +void keyboard_post_init_user(void){ + //Enable the LED layers + rgblight_layers = my_rgb_layers; +} + +// Enabling and disabling lighting layers +layer_state_t layer_state_set_user(layer_state_t state) { + // Both layers will light up if both kb layers are active + rgblight_set_layer_state(0, layer_state_cmp(state, 0)); + rgblight_set_layer_state(1, layer_state_cmp(state, 1)); + rgblight_set_layer_state(3, layer_state_cmp(state, 3)); + + return state; +} + +bool led_update_user(led_t led_state) { + rgblight_set_layer_state(0, led_state.scroll_lock); + rgblight_set_layer_state(1, led_state.caps_lock); + rgblight_set_layer_state(3, led_state.num_lock); + + return true; +} + diff --git a/keyboards/sets3n/kk980/keymaps/via/rules.mk b/keyboards/sets3n/kk980/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/sets3n/kk980/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/sets3n/kk980/kk980.c b/keyboards/sets3n/kk980/kk980.c new file mode 100644 index 0000000000..d5254b3fc0 --- /dev/null +++ b/keyboards/sets3n/kk980/kk980.c @@ -0,0 +1,17 @@ +/* Copyright 2021 Sets3n + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "kk980.h" diff --git a/keyboards/sets3n/kk980/kk980.h b/keyboards/sets3n/kk980/kk980.h new file mode 100644 index 0000000000..238d124beb --- /dev/null +++ b/keyboards/sets3n/kk980/kk980.h @@ -0,0 +1,34 @@ +/* Copyright 2021 Sets3n + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" + +#define LAYOUT( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K316, \ + K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414, K415, \ + K500, K501, K502, K505, K506, K507, K508, K509, K510, K511, K512, K513, K514, K515, K516 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, KC_NO }, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K316 }, \ + { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414, K415, KC_NO }, \ + { K500, K501, K502, KC_NO, KC_NO, K505, K506, K507, K508, K509, K510, K511, K512, K513, K514, K515, K516 } \ +} diff --git a/keyboards/sets3n/kk980/readme.md b/keyboards/sets3n/kk980/readme.md new file mode 100644 index 0000000000..0a1142e571 --- /dev/null +++ b/keyboards/sets3n/kk980/readme.md @@ -0,0 +1,31 @@ +# kk980 + +![kk980](https://i.imgur.com/NDsBMR6.jpg) + +A hotswap 98% RGB Mechanical keyboard. + +* Keyboard Maintainer: [sets3n](https://github.com/sets3n) +* Hardware Supported: kk980 PCB +* Hardware Availability: - + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available + +## HEX + +Make example for this keyboard (after setting up your build environment): + + make sets3n/kk980:default + +## FLASH + +Flashing example for this keyboard: + + make sets3n/kk980:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/sets3n/kk980/rules.mk b/keyboards/sets3n/kk980/rules.mk new file mode 100644 index 0000000000..1047658606 --- /dev/null +++ b/keyboards/sets3n/kk980/rules.mk @@ -0,0 +1,21 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output From 01b0eeac1ebbf45ef974152f240b3132470d0da6 Mon Sep 17 00:00:00 2001 From: Blake Date: Wed, 22 Sep 2021 07:49:46 +0100 Subject: [PATCH 083/595] [Keyboard] Version 2 of Draytronics Elise Keyboard + ISO Keymap Change (#14253) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- .../elise/keymaps/blake_iso/keymap.c | 18 +- keyboards/draytronics/elise_v2/config.h | 79 +++ keyboards/draytronics/elise_v2/elise_v2.c | 18 + keyboards/draytronics/elise_v2/elise_v2.h | 135 ++++ keyboards/draytronics/elise_v2/info.json | 619 ++++++++++++++++++ .../elise_v2/keymaps/blake_iso/keymap.c | 68 ++ .../elise_v2/keymaps/default/keymap.c | 67 ++ .../elise_v2/keymaps/default_iso/keymap.c | 68 ++ keyboards/draytronics/elise_v2/readme.md | 34 + keyboards/draytronics/elise_v2/rules.mk | 23 + 10 files changed, 1120 insertions(+), 9 deletions(-) create mode 100644 keyboards/draytronics/elise_v2/config.h create mode 100755 keyboards/draytronics/elise_v2/elise_v2.c create mode 100755 keyboards/draytronics/elise_v2/elise_v2.h create mode 100644 keyboards/draytronics/elise_v2/info.json create mode 100644 keyboards/draytronics/elise_v2/keymaps/blake_iso/keymap.c create mode 100644 keyboards/draytronics/elise_v2/keymaps/default/keymap.c create mode 100644 keyboards/draytronics/elise_v2/keymaps/default_iso/keymap.c create mode 100644 keyboards/draytronics/elise_v2/readme.md create mode 100644 keyboards/draytronics/elise_v2/rules.mk diff --git a/keyboards/draytronics/elise/keymaps/blake_iso/keymap.c b/keyboards/draytronics/elise/keymaps/blake_iso/keymap.c index 3f613d492e..65e0629e1d 100644 --- a/keyboards/draytronics/elise/keymaps/blake_iso/keymap.c +++ b/keyboards/draytronics/elise/keymaps/blake_iso/keymap.c @@ -26,23 +26,23 @@ enum custom_layers { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap _BL: (Base Layer) Default Layer * ,----------------------------------------------------------------. - * |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |~ ` | + * |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |Home| * |----------------------------------------------------------------| * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| |PgUp| - * |----------------------------------------------------------------| + * |------------------------------------------------------- -----| * |CAPS | A| S| D| F| G| H| J| K| L| ;| '| #|Entr|PgDn| * |----------------------------------------------------------------| - * |Shift | Z| X| C| V| B| N| M| ,| .| /|RShif| ↑ |End | + * |Shift| \ | Z| X| C| V| B| N| M| ,| .| /|RShif| ↑ |End | * |----------------------------------------------------------------| * |Ctrl|Win |Alt | Space |RAlt|RCtrl|Fn| ← | ↓ | → | * `----------------------------------------------------------------' */ [_BL] = LAYOUT_65_iso( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_PGUP, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_PGDN, - KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, - KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT ), /* Keymap _FL1: Function Layer 1 @@ -50,10 +50,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |~ `| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| Delete| Ins| * |----------------------------------------------------------------| * |RESET| | ↑ | | | | | | | | | | | | | - * |----------------------------------------------------------------| + * |------------------------------------------------------- -----| * | | ← | ↓ | → | | | | | | | | | | | | * |----------------------------------------------------------------| - * |HUI |SAI|VAI |RGBMOD| | | | | | | |Play|V+|Mut| + * |HUI |SAI|VAI |RGBMOD| | | | | | | | |Play|V+|Mut| * |----------------------------------------------------------------| * |HUD |SAD |VAD | RGB_Tog | | | | | * `----------------------------------------------------------------' @@ -62,7 +62,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_INS, RESET, _______, KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - RGB_HUI, _______, RGB_SAI, RGB_VAI, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, KC_VOLU, KC_MUTE, + RGB_HUI, RGB_SAI, RGB_VAI, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, KC_VOLU, KC_MUTE, RGB_HUD, RGB_SAD, RGB_VAD, RGB_TOG, _______, _______, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT ) }; diff --git a/keyboards/draytronics/elise_v2/config.h b/keyboards/draytronics/elise_v2/config.h new file mode 100644 index 0000000000..931125e117 --- /dev/null +++ b/keyboards/draytronics/elise_v2/config.h @@ -0,0 +1,79 @@ +/*Copyright 2021 Blake Drayson / Draytronics + +Contact info@draytronics.co.uk + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4454 //DT for DrayTronics +#define PRODUCT_ID 0x454C //EL for Elise +#define DEVICE_VER 0x0200 //Version 2 +#define MANUFACTURER Draytronics +#define PRODUCT ELISE + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { B2,B3, B1, F0, F1} +#define MATRIX_COL_PINS { F4, F5, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4, D2, D3, D5} +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +// ws2812 options +#define RGB_DI_PIN D1 // pin the DI on the ws2812 is hooked-up to +#ifdef RGB_DI_PIN + #define RGBLED_NUM 16 + #define RGBLIGHT_HUE_STEP 8 + #define RGBLIGHT_SAT_STEP 8 + #define RGBLIGHT_VAL_STEP 8 + #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ + #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ + /*== all animations enable ==*/ +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE +#endif diff --git a/keyboards/draytronics/elise_v2/elise_v2.c b/keyboards/draytronics/elise_v2/elise_v2.c new file mode 100755 index 0000000000..f153d7a341 --- /dev/null +++ b/keyboards/draytronics/elise_v2/elise_v2.c @@ -0,0 +1,18 @@ +/*Copyright 2021 Blake Drayson / Draytronics + +Contact info@draytronics.co.uk + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include "elise_v2.h" diff --git a/keyboards/draytronics/elise_v2/elise_v2.h b/keyboards/draytronics/elise_v2/elise_v2.h new file mode 100755 index 0000000000..750d651a23 --- /dev/null +++ b/keyboards/draytronics/elise_v2/elise_v2.h @@ -0,0 +1,135 @@ +/*Copyright 2021 Blake Drayson / Draytronics + +Contact info@draytronics.co.uk + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#define _x_ KC_NO + +#include "quantum.h" + +#define LAYOUT_65_ansi( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K2E, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D, K4E \ +) { \ +{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ +{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ +{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, _x_, K2D, K2E }, \ +{ K30, _x_, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ +{ K40, K41, K42, _x_, _x_, K45, _x_, _x_, _x_, K49, K4A, K4B, K4C, K4D, K4E} \ +} + +#define LAYOUT_65_ansi_rwkl( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K2E, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K45, K49, K4B, K4C, K4D, K4E \ +) { \ +{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ +{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ +{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, _x_, K2D, K2E }, \ +{ K30, _x_, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ +{ K40, K41, K42, _x_, _x_, K45, _x_, _x_, _x_, K49, _x_, K4B, K4C, K4D, K4E} \ +} + +#define LAYOUT_65_ansi_lwkl( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K2E, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K42, K45, K49, K4A, K4B, K4C, K4D, K4E \ +) { \ +{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ +{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ +{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, _x_, K2D, K2E }, \ +{ K30, _x_, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ +{ K40, _x_, K42, _x_, _x_, K45, _x_, _x_, _x_, K49, K4A, K4B, K4C, K4D, K4E} \ +} + +#define LAYOUT_65_ansi_wkl( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K2E, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K42, K45, K49, K4B, K4C, K4D, K4E \ +) { \ +{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ +{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ +{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, _x_, K2D, K2E }, \ +{ K30, _x_, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ +{ K40, _x_, K42, _x_, _x_, K45, _x_, _x_, _x_, K49, _x_, K4B, K4C, K4D, K4E} \ +} + +#define LAYOUT_65_iso( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K1D, K2E, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D, K4E \ +) { \ +{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ +{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ +{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, _x_, K2D, K2E }, \ +{ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ +{ K40, K41, K42, _x_, _x_, K45, _x_, _x_, _x_, K49, K4A, K4B, K4C, K4D, K4E} \ +} + +#define LAYOUT_65_iso_rwkl( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K1D, K2E, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K45, K49, K4B, K4C, K4D, K4E \ +) { \ +{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ +{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ +{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, _x_, K2D, K2E }, \ +{ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ +{ K40, K41, K42, _x_, _x_, K45, _x_, _x_, _x_, K49, _x_, K4B, K4C, K4D, K4E} \ +} + +#define LAYOUT_65_iso_lwkl( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K1D, K2E, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K42, K45, K49, K4A, K4B, K4C, K4D, K4E \ +) { \ +{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ +{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ +{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, _x_, K2D, K2E }, \ +{ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ +{ K40, _x_, K42, _x_, _x_, K45, _x_, _x_, _x_, K49, K4A, K4B, K4C, K4D, K4E} \ +} + +#define LAYOUT_65_iso_wkl( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K1D, K2E, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K42, K45, K49, K4B, K4C, K4D, K4E \ +) { \ +{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ +{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ +{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, _x_, K2D, K2E }, \ +{ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ +{ K40, _x_, K42, _x_, _x_, K45, _x_, _x_, _x_, K49, _x_, K4B, K4C, K4D, K4E} \ +} diff --git a/keyboards/draytronics/elise_v2/info.json b/keyboards/draytronics/elise_v2/info.json new file mode 100644 index 0000000000..9e391ad1db --- /dev/null +++ b/keyboards/draytronics/elise_v2/info.json @@ -0,0 +1,619 @@ +{ + "keyboard_name": "Draytronics ELISE V2", + "url": "https://www.draytronics.co.uk/elisev2", + "maintainer": "ghostseven", + "layout_aliases": { + "LAYOUT_65_ansi_right_lrg": "LAYOUT_65_ansi_rwkl", + "LAYOUT_65_ansi_left_lrg": "LAYOUT_65_ansi_lwkl", + "LAYOUT_65_ansi_lrg": "LAYOUT_65_ansi_wkl", + "LAYOUT_65_iso_right_lrg": "LAYOUT_65_iso_rwkl", + "LAYOUT_65_iso_left_lrg": "LAYOUT_65_iso_lwkl", + "LAYOUT_65_iso_lrg": "LAYOUT_65_iso_wkl" + }, + "layouts": { + "LAYOUT_65_ansi": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"1", "x":1, "y":0}, + {"label":"2", "x":2, "y":0}, + {"label":"3", "x":3, "y":0}, + {"label":"4", "x":4, "y":0}, + {"label":"5", "x":5, "y":0}, + {"label":"6", "x":6, "y":0}, + {"label":"7", "x":7, "y":0}, + {"label":"8", "x":8, "y":0}, + {"label":"9", "x":9, "y":0}, + {"label":"10", "x":10, "y":0}, + {"label":"-", "x":11, "y":0}, + {"label":"=", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0, "w":2}, + {"label":"~", "x":15, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[", "x":11.5, "y":1}, + {"label":"]", "x":12.5, "y":1}, + {"label":"\\", "x":13.5, "y":1, "w":1.5}, + {"label":"Delete", "x":15, "y":1}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";", "x":10.75, "y":2}, + {"label":"'", "x":11.75, "y":2}, + {"label":"Enter", "x":12.75, "y":2, "w":2.25}, + {"label":"PgUp", "x":15, "y":2}, + + {"label":"Shift", "x":0, "y":3, "w":2.25}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",", "x":9.25, "y":3}, + {"label":".", "x":10.25, "y":3}, + {"label":"/", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"\u2191", "x":14, "y":3}, + {"label":"PgDn", "x":15, "y":3}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"Win", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"label":"Space", "x":3.75, "y":4, "w":6.25}, + {"label":"Alt", "x":10, "y":4}, + {"label":"Fn", "x":11, "y":4}, + {"label":"Ctrl", "x":12, "y":4}, + {"label":"\u2190", "x":13, "y":4}, + {"label":"\u2193", "x":14, "y":4}, + {"label":"\u2192", "x":15, "y":4} + ] + }, + "LAYOUT_65_ansi_rwkl": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"1", "x":1, "y":0}, + {"label":"2", "x":2, "y":0}, + {"label":"3", "x":3, "y":0}, + {"label":"4", "x":4, "y":0}, + {"label":"5", "x":5, "y":0}, + {"label":"6", "x":6, "y":0}, + {"label":"7", "x":7, "y":0}, + {"label":"8", "x":8, "y":0}, + {"label":"9", "x":9, "y":0}, + {"label":"10", "x":10, "y":0}, + {"label":"-", "x":11, "y":0}, + {"label":"=", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0, "w":2}, + {"label":"~", "x":15, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[", "x":11.5, "y":1}, + {"label":"]", "x":12.5, "y":1}, + {"label":"\\", "x":13.5, "y":1, "w":1.5}, + {"label":"Delete", "x":15, "y":1}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";", "x":10.75, "y":2}, + {"label":"'", "x":11.75, "y":2}, + {"label":"Enter", "x":12.75, "y":2, "w":2.25}, + {"label":"PgUp", "x":15, "y":2}, + + {"label":"Shift", "x":0, "y":3, "w":2.25}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",", "x":9.25, "y":3}, + {"label":".", "x":10.25, "y":3}, + {"label":"/", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"\u2191", "x":14, "y":3}, + {"label":"PgDn", "x":15, "y":3}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"Win", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"label":"Space", "x":3.75, "y":4, "w":6.25}, + {"label":"Alt", "x":10, "y":4, "w":1.5}, + {"label":"Fn", "x":11.5, "y":4, "w":1.5}, + {"label":"\u2190", "x":13, "y":4}, + {"label":"\u2193", "x":14, "y":4}, + {"label":"\u2192", "x":15, "y":4} + ] + }, + "LAYOUT_65_ansi_lwkl": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"1", "x":1, "y":0}, + {"label":"2", "x":2, "y":0}, + {"label":"3", "x":3, "y":0}, + {"label":"4", "x":4, "y":0}, + {"label":"5", "x":5, "y":0}, + {"label":"6", "x":6, "y":0}, + {"label":"7", "x":7, "y":0}, + {"label":"8", "x":8, "y":0}, + {"label":"9", "x":9, "y":0}, + {"label":"10", "x":10, "y":0}, + {"label":"-", "x":11, "y":0}, + {"label":"=", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0, "w":2}, + {"label":"~", "x":15, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[", "x":11.5, "y":1}, + {"label":"]", "x":12.5, "y":1}, + {"label":"\\", "x":13.5, "y":1, "w":1.5}, + {"label":"Delete", "x":15, "y":1}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";", "x":10.75, "y":2}, + {"label":"'", "x":11.75, "y":2}, + {"label":"Enter", "x":12.75, "y":2, "w":2.25}, + {"label":"PgUp", "x":15, "y":2}, + + {"label":"Shift", "x":0, "y":3, "w":2.25}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",", "x":9.25, "y":3}, + {"label":".", "x":10.25, "y":3}, + {"label":"/", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"\u2191", "x":14, "y":3}, + {"label":"PgDn", "x":15, "y":3}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.5}, + {"label":"Alt", "x":1.5, "y":4, "w":1.5}, + {"label":"Space", "x":3, "y":4, "w":7}, + {"label":"Alt", "x":10, "y":4}, + {"label":"Fn", "x":11, "y":4}, + {"label":"Ctrl", "x":12, "y":4}, + {"label":"\u2190", "x":13, "y":4}, + {"label":"\u2193", "x":14, "y":4}, + {"label":"\u2192", "x":15, "y":4} + ] + }, + "LAYOUT_65_ansi_wkl": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"1", "x":1, "y":0}, + {"label":"2", "x":2, "y":0}, + {"label":"3", "x":3, "y":0}, + {"label":"4", "x":4, "y":0}, + {"label":"5", "x":5, "y":0}, + {"label":"6", "x":6, "y":0}, + {"label":"7", "x":7, "y":0}, + {"label":"8", "x":8, "y":0}, + {"label":"9", "x":9, "y":0}, + {"label":"10", "x":10, "y":0}, + {"label":"-", "x":11, "y":0}, + {"label":"=", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0, "w":2}, + {"label":"~", "x":15, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[", "x":11.5, "y":1}, + {"label":"]", "x":12.5, "y":1}, + {"label":"\\", "x":13.5, "y":1, "w":1.5}, + {"label":"Delete", "x":15, "y":1}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";", "x":10.75, "y":2}, + {"label":"'", "x":11.75, "y":2}, + {"label":"Enter", "x":12.75, "y":2, "w":2.25}, + {"label":"PgUp", "x":15, "y":2}, + + {"label":"Shift", "x":0, "y":3, "w":2.25}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",", "x":9.25, "y":3}, + {"label":".", "x":10.25, "y":3}, + {"label":"/", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"\u2191", "x":14, "y":3}, + {"label":"PgDn", "x":15, "y":3}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.5}, + {"label":"Alt", "x":1.5, "y":4, "w":1.5}, + {"label":"Space", "x":3, "y":4, "w":7}, + {"label":"Alt", "x":10, "y":4, "w":1.5}, + {"label":"Fn", "x":11.5, "y":4, "w":1.5}, + {"label":"\u2190", "x":13, "y":4}, + {"label":"\u2193", "x":14, "y":4}, + {"label":"\u2192", "x":15, "y":4} + ] + }, + "LAYOUT_65_iso": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"1", "x":1, "y":0}, + {"label":"2", "x":2, "y":0}, + {"label":"3", "x":3, "y":0}, + {"label":"4", "x":4, "y":0}, + {"label":"5", "x":5, "y":0}, + {"label":"6", "x":6, "y":0}, + {"label":"7", "x":7, "y":0}, + {"label":"8", "x":8, "y":0}, + {"label":"9", "x":9, "y":0}, + {"label":"10", "x":10, "y":0}, + {"label":"-", "x":11, "y":0}, + {"label":"=", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0, "w":2}, + {"label":"~", "x":15, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[", "x":11.5, "y":1}, + {"label":"]", "x":12.5, "y":1}, + {"label":"Delete", "x":15, "y":1}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";", "x":10.75, "y":2}, + {"label":"'", "x":11.75, "y":2}, + {"label":"#", "x":12.75, "y":2}, + {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, + {"label":"PgUp", "x":15, "y":2}, + + {"label":"Shift", "x":0, "y":3, "w":1.25}, + {"label":"\\", "x":1.25, "y":3}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",", "x":9.25, "y":3}, + {"label":".", "x":10.25, "y":3}, + {"label":"/", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"\u2191", "x":14, "y":3}, + {"label":"PgDn", "x":15, "y":3}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"Win", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"label":"Space", "x":3.75, "y":4, "w":6.25}, + {"label":"Alt", "x":10, "y":4}, + {"label":"Fn", "x":11, "y":4}, + {"label":"Ctrl", "x":12, "y":4}, + {"label":"\u2190", "x":13, "y":4}, + {"label":"\u2193", "x":14, "y":4}, + {"label":"\u2192", "x":15, "y":4} + ] + }, + "LAYOUT_65_iso_rwkl": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"1", "x":1, "y":0}, + {"label":"2", "x":2, "y":0}, + {"label":"3", "x":3, "y":0}, + {"label":"4", "x":4, "y":0}, + {"label":"5", "x":5, "y":0}, + {"label":"6", "x":6, "y":0}, + {"label":"7", "x":7, "y":0}, + {"label":"8", "x":8, "y":0}, + {"label":"9", "x":9, "y":0}, + {"label":"10", "x":10, "y":0}, + {"label":"-", "x":11, "y":0}, + {"label":"=", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0, "w":2}, + {"label":"~", "x":15, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[", "x":11.5, "y":1}, + {"label":"]", "x":12.5, "y":1}, + {"label":"Delete", "x":15, "y":1}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";", "x":10.75, "y":2}, + {"label":"'", "x":11.75, "y":2}, + {"label":"#", "x":12.75, "y":2}, + {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, + {"label":"PgUp", "x":15, "y":2}, + + {"label":"Shift", "x":0, "y":3, "w":1.25}, + {"label":"\\", "x":1.25, "y":3}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",", "x":9.25, "y":3}, + {"label":".", "x":10.25, "y":3}, + {"label":"/", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"\u2191", "x":14, "y":3}, + {"label":"PgDn", "x":15, "y":3}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"Win", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"label":"Space", "x":3.75, "y":4, "w":6.25}, + {"label":"Alt", "x":10, "y":4, "w":1.5}, + {"label":"Fn", "x":11.5, "y":4, "w":1.5}, + {"label":"\u2190", "x":13, "y":4}, + {"label":"\u2193", "x":14, "y":4}, + {"label":"\u2192", "x":15, "y":4} + ] + }, + "LAYOUT_65_iso_lwkl": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"1", "x":1, "y":0}, + {"label":"2", "x":2, "y":0}, + {"label":"3", "x":3, "y":0}, + {"label":"4", "x":4, "y":0}, + {"label":"5", "x":5, "y":0}, + {"label":"6", "x":6, "y":0}, + {"label":"7", "x":7, "y":0}, + {"label":"8", "x":8, "y":0}, + {"label":"9", "x":9, "y":0}, + {"label":"10", "x":10, "y":0}, + {"label":"-", "x":11, "y":0}, + {"label":"=", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0, "w":2}, + {"label":"~", "x":15, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[", "x":11.5, "y":1}, + {"label":"]", "x":12.5, "y":1}, + {"label":"Delete", "x":15, "y":1}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";", "x":10.75, "y":2}, + {"label":"'", "x":11.75, "y":2}, + {"label":"#", "x":12.75, "y":2}, + {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, + {"label":"PgUp", "x":15, "y":2}, + + {"label":"Shift", "x":0, "y":3, "w":1.25}, + {"label":"\\", "x":1.25, "y":3}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",", "x":9.25, "y":3}, + {"label":".", "x":10.25, "y":3}, + {"label":"/", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"\u2191", "x":14, "y":3}, + {"label":"PgDn", "x":15, "y":3}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.5}, + {"label":"Alt", "x":1.5, "y":4, "w":1.5}, + {"label":"Space", "x":3, "y":4, "w":7}, + {"label":"Alt", "x":10, "y":4}, + {"label":"Fn", "x":11, "y":4}, + {"label":"Ctrl", "x":12, "y":4}, + {"label":"\u2190", "x":13, "y":4}, + {"label":"\u2193", "x":14, "y":4}, + {"label":"\u2192", "x":15, "y":4} + ] + }, + "LAYOUT_65_iso_wkl": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"1", "x":1, "y":0}, + {"label":"2", "x":2, "y":0}, + {"label":"3", "x":3, "y":0}, + {"label":"4", "x":4, "y":0}, + {"label":"5", "x":5, "y":0}, + {"label":"6", "x":6, "y":0}, + {"label":"7", "x":7, "y":0}, + {"label":"8", "x":8, "y":0}, + {"label":"9", "x":9, "y":0}, + {"label":"10", "x":10, "y":0}, + {"label":"-", "x":11, "y":0}, + {"label":"=", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0, "w":2}, + {"label":"~", "x":15, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[", "x":11.5, "y":1}, + {"label":"]", "x":12.5, "y":1}, + {"label":"Delete", "x":15, "y":1}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";", "x":10.75, "y":2}, + {"label":"'", "x":11.75, "y":2}, + {"label":"#", "x":12.75, "y":2}, + {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, + {"label":"PgUp", "x":15, "y":2}, + + {"label":"Shift", "x":0, "y":3, "w":1.25}, + {"label":"\\", "x":1.25, "y":3}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",", "x":9.25, "y":3}, + {"label":".", "x":10.25, "y":3}, + {"label":"/", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"\u2191", "x":14, "y":3}, + {"label":"PgDn", "x":15, "y":3}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.5}, + {"label":"Alt", "x":1.5, "y":4, "w":1.5}, + {"label":"Space", "x":3, "y":4, "w":7}, + {"label":"Alt", "x":10, "y":4, "w":1.5}, + {"label":"Fn", "x":11.5, "y":4, "w":1.5}, + {"label":"\u2190", "x":13, "y":4}, + {"label":"\u2193", "x":14, "y":4}, + {"label":"\u2192", "x":15, "y":4} + ] + } + } +} diff --git a/keyboards/draytronics/elise_v2/keymaps/blake_iso/keymap.c b/keyboards/draytronics/elise_v2/keymaps/blake_iso/keymap.c new file mode 100644 index 0000000000..65e0629e1d --- /dev/null +++ b/keyboards/draytronics/elise_v2/keymaps/blake_iso/keymap.c @@ -0,0 +1,68 @@ +/*Copyright 2021 Blake Drayson / Draytronics + +Contact info@draytronics.co.uk + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + +enum custom_layers { + _BL, + _FL, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: (Base Layer) Default Layer + * ,----------------------------------------------------------------. + * |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |Home| + * |----------------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| |PgUp| + * |------------------------------------------------------- -----| + * |CAPS | A| S| D| F| G| H| J| K| L| ;| '| #|Entr|PgDn| + * |----------------------------------------------------------------| + * |Shift| \ | Z| X| C| V| B| N| M| ,| .| /|RShif| ↑ |End | + * |----------------------------------------------------------------| + * |Ctrl|Win |Alt | Space |RAlt|RCtrl|Fn| ← | ↓ | → | + * `----------------------------------------------------------------' + */ + [_BL] = LAYOUT_65_iso( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_PGDN, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT + ), + + /* Keymap _FL1: Function Layer 1 + * ,----------------------------------------------------------------. + * |~ `| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| Delete| Ins| + * |----------------------------------------------------------------| + * |RESET| | ↑ | | | | | | | | | | | | | + * |------------------------------------------------------- -----| + * | | ← | ↓ | → | | | | | | | | | | | | + * |----------------------------------------------------------------| + * |HUI |SAI|VAI |RGBMOD| | | | | | | | |Play|V+|Mut| + * |----------------------------------------------------------------| + * |HUD |SAD |VAD | RGB_Tog | | | | | + * `----------------------------------------------------------------' + */ + [_FL] = LAYOUT_65_iso( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_INS, + RESET, _______, KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + RGB_HUI, RGB_SAI, RGB_VAI, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, KC_VOLU, KC_MUTE, + RGB_HUD, RGB_SAD, RGB_VAD, RGB_TOG, _______, _______, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT + ) +}; diff --git a/keyboards/draytronics/elise_v2/keymaps/default/keymap.c b/keyboards/draytronics/elise_v2/keymaps/default/keymap.c new file mode 100644 index 0000000000..75f907d429 --- /dev/null +++ b/keyboards/draytronics/elise_v2/keymaps/default/keymap.c @@ -0,0 +1,67 @@ +/*Copyright 2021 Blake Drayson / Draytronics + +Contact info@draytronics.co.uk + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include QMK_KEYBOARD_H + +enum custom_layers { + _BL, + _FL, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: (Base Layer) Default Layer + * ,----------------------------------------------------------------. + * |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |Home| + * |----------------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \ |PgUp| + * |----------------------------------------------------------------| + * |CAPS | A| S| D| F| G| H| J| K| L| ;| '|Return |PgDn| + * |----------------------------------------------------------------| + * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Up |End | + * |----------------------------------------------------------------| + * |Ctrl|Win |Alt | Space |RAlt|FN|RCtrl| ← | ↓ | → | + * `----------------------------------------------------------------' + */ + [_BL] = LAYOUT_65_ansi( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_NUHS, KC_ENT, KC_PGDN, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + /* Keymap _FL: Function Layer + * ,----------------------------------------------------------------. + * | ~ | F1|F2 |F3 |F4 |F5 |F6 |F7 |F8 |F9 |F10|F11|F12|Del |INS | + * |----------------------------------------------------------------| + * |RESET| | ↑ | | | | | | | | | | | | | + * |------------------------------------------------------- -----| + * | | ← | ↓ | → | | | | | | | | | | | | + * |----------------------------------------------------------------| + * |HUI |SAI|VAI|RGBMOD| | | | | | | |Play |V+ |Mut | + * |----------------------------------------------------------------| + * |HUD |SAD |VAD | RGB_Tog | | | | | + * `----------------------------------------------------------------' + */ + [_FL] = LAYOUT_65_ansi( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_INS, + RESET, _______, KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + RGB_HUI, RGB_SAI, RGB_VAI, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, KC_VOLU, KC_MUTE, + RGB_HUD, RGB_SAD, RGB_VAD, RGB_TOG, _______, KC_TRNS, _______, KC_MPRV, KC_VOLD, KC_MNXT + ), +};ßß diff --git a/keyboards/draytronics/elise_v2/keymaps/default_iso/keymap.c b/keyboards/draytronics/elise_v2/keymaps/default_iso/keymap.c new file mode 100644 index 0000000000..a51272a357 --- /dev/null +++ b/keyboards/draytronics/elise_v2/keymaps/default_iso/keymap.c @@ -0,0 +1,68 @@ +/*Copyright 2021 Blake Drayson / Draytronics + +Contact info@draytronics.co.uk + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + +enum custom_layers { + _BL, + _FL, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap _BL: (Base Layer) Default Layer + * ,----------------------------------------------------------------. + * |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp |Home| + * |----------------------------------------------------------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| |PgUp| + * |------------------------------------------------------- -----| + * |CAPS | A| S| D| F| G| H| J| K| L| ;| '| #|Entr|PgDn| + * |----------------------------------------------------------------| + * |Shift| \ | Z| X| C| V| B| N| M| ,| .| /|RShif| ↑ |End | + * |----------------------------------------------------------------| + * |Ctrl|Win |Alt | Space |RAlt|RCtrl|Fn| ← | ↓ | → | + * `----------------------------------------------------------------' + */ + [_BL] = LAYOUT_65_iso( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_PGDN, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT + ), + + /* Keymap _FL1: Function Layer 1 + * ,----------------------------------------------------------------. + * |~ `| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| Delete| Ins| + * |----------------------------------------------------------------| + * |RESET| | ↑ | | | | | | | | | | | | | + * |------------------------------------------------------- -----| + * | | ← | ↓ | → | | | | | | | | | | | | + * |----------------------------------------------------------------| + * |HUI |SAI|VAI |RGBMOD| | | | | | | | |Play|V+|Mut| + * |----------------------------------------------------------------| + * |HUD |SAD |VAD | RGB_Tog | | | | | + * `----------------------------------------------------------------' + */ + [_FL] = LAYOUT_65_iso( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_INS, + RESET, _______, KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + RGB_HUI, RGB_SAI, RGB_VAI, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, KC_VOLU, KC_MUTE, + RGB_HUD, RGB_SAD, RGB_VAD, RGB_TOG, _______, _______, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT + ) +}; diff --git a/keyboards/draytronics/elise_v2/readme.md b/keyboards/draytronics/elise_v2/readme.md new file mode 100644 index 0000000000..32730f930a --- /dev/null +++ b/keyboards/draytronics/elise_v2/readme.md @@ -0,0 +1,34 @@ +# ELISE V2 + +![elise](https://www.draytronics.co.uk/wp-content/uploads/2021/08/repository-open-graph-template-v2.png) + +***V2 now includes an tweaked design and 16 RGB underglow LEDs for a more consistent and even underglow effect (up from 7 on the original)*** + +A open source, low cost 65% keyboard PCB with USB-C, ESD protection, RGB underglow and XD68 case / plate compatability. Designed in the UK. +More info / sales / PCB designs available at [draytronics.co.uk/elise](https://draytronics.co.uk) + +* Keyboard Maintainer: [Blake Drayson](https://github.com/ghostseven) +* Hardware Supported: ELISE PCB / ATMega32U4 +* Hardware Availability: [draytronics.co.uk](https://draytronics.co.uk) + + +Entering DFU mode (to allow flashing): + + - Pressing the reset button on the back of the board when it is plugged in will enter DFU. + - Holding down the ESC key whilst plugging in the keyboard will enter DFU. + - If you have one of the provided keymaps flashed, then pressing FN-Tab will enter DFU. + +Make example for this keyboard (after setting up your build environment): + + make draytronics/elise_v2:default + +Flashing example for this keyboard: + + make draytronics/elise_v2:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + + +![elise-pcb-top](https://www.draytronics.co.uk/wp-content/uploads/2021/08/Draytronics-Elise-PCB-V2-top.png) + +![elise-pcb-bot](https://www.draytronics.co.uk/wp-content/uploads/2021/08/Draytronics-Elise-PCB-V2-bottom.png) diff --git a/keyboards/draytronics/elise_v2/rules.mk b/keyboards/draytronics/elise_v2/rules.mk new file mode 100644 index 0000000000..6bbe5afe83 --- /dev/null +++ b/keyboards/draytronics/elise_v2/rules.mk @@ -0,0 +1,23 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output + +LAYOUTS = 65_ansi 65_iso From 57d4e80845781af4387bbcc30784e163ea15617e Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Wed, 22 Sep 2021 09:47:56 -0700 Subject: [PATCH 084/595] [Keyboard] Disable console on Smallkeyboard (#14561) --- keyboards/smallkeyboard/rules.mk | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/keyboards/smallkeyboard/rules.mk b/keyboards/smallkeyboard/rules.mk index 54c776b6ec..bf7736d00f 100644 --- a/keyboards/smallkeyboard/rules.mk +++ b/keyboards/smallkeyboard/rules.mk @@ -7,10 +7,10 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug +CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend From ce5bb612a9605dbc9f4b6e62a28d1931331e8298 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Wed, 22 Sep 2021 09:53:03 -0700 Subject: [PATCH 085/595] [Keyboard] Fix default keymap for Draytronics Elise V2 keyboard (#14562) --- keyboards/draytronics/elise_v2/keymaps/default/keymap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/keyboards/draytronics/elise_v2/keymaps/default/keymap.c b/keyboards/draytronics/elise_v2/keymaps/default/keymap.c index 75f907d429..62b4b576dd 100644 --- a/keyboards/draytronics/elise_v2/keymaps/default/keymap.c +++ b/keyboards/draytronics/elise_v2/keymaps/default/keymap.c @@ -40,7 +40,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_NUHS, KC_ENT, KC_PGDN, - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ), @@ -64,4 +64,4 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { RGB_HUI, RGB_SAI, RGB_VAI, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, KC_VOLU, KC_MUTE, RGB_HUD, RGB_SAD, RGB_VAD, RGB_TOG, _______, KC_TRNS, _______, KC_MPRV, KC_VOLD, KC_MNXT ), -};ßß +}; From 1aaef6c9884822a3abecf2e664af9bb21e0000c3 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Wed, 22 Sep 2021 19:33:41 +0000 Subject: [PATCH 086/595] Remove BLUETOOTH_ENABLE from keyboard-level rules.mk (2021-09-22) (#14567) * Remove BLUETOOTH_ENABLE from keyboard-level rules.mk (2021-09-22) * update keyboards/handwired/slash/rules.mk per fauxpark --- keyboards/canary/canary60rgb/v1/rules.mk | 1 - keyboards/handwired/slash/rules.mk | 1 - keyboards/kiwikeebs/macro_v2/rules.mk | 3 +-- keyboards/kprepublic/bm43hsrgb/rules.mk | 1 - keyboards/mode/m65s/rules.mk | 1 - keyboards/mokey/mokey63/rules.mk | 2 -- keyboards/nix_studio/oxalys80/rules.mk | 1 - 7 files changed, 1 insertion(+), 9 deletions(-) diff --git a/keyboards/canary/canary60rgb/v1/rules.mk b/keyboards/canary/canary60rgb/v1/rules.mk index 31d83651ff..24f7f48263 100644 --- a/keyboards/canary/canary60rgb/v1/rules.mk +++ b/keyboards/canary/canary60rgb/v1/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -BLUETOOTH_ENABLE = no # Enable Bluetooth AUDIO_ENABLE = no # Audio output RGB_MATRIX_ENABLE = yes # Use RGB matrix RGB_MATRIX_DRIVER = IS31FL3733 diff --git a/keyboards/handwired/slash/rules.mk b/keyboards/handwired/slash/rules.mk index a896e98d88..12b08f9477 100644 --- a/keyboards/handwired/slash/rules.mk +++ b/keyboards/handwired/slash/rules.mk @@ -22,6 +22,5 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode -#BLUETOOTH_ENABLE = Yes # Enable Bluetooth with the Adafruit EZ-Key HID BLUETOOTH = AdafruitBLE AUDIO_ENABLE = no # Audio output diff --git a/keyboards/kiwikeebs/macro_v2/rules.mk b/keyboards/kiwikeebs/macro_v2/rules.mk index c1524daac2..41aae09aab 100644 --- a/keyboards/kiwikeebs/macro_v2/rules.mk +++ b/keyboards/kiwikeebs/macro_v2/rules.mk @@ -16,6 +16,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -BLUETOOTH_ENABLE = no # Enable Bluetooth AUDIO_ENABLE = no # Audio output -ENCODER_ENABLE = yes \ No newline at end of file +ENCODER_ENABLE = yes diff --git a/keyboards/kprepublic/bm43hsrgb/rules.mk b/keyboards/kprepublic/bm43hsrgb/rules.mk index 4e9c7bd62e..bd1d0e5ef7 100755 --- a/keyboards/kprepublic/bm43hsrgb/rules.mk +++ b/keyboards/kprepublic/bm43hsrgb/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -BLUETOOTH_ENABLE = no # Enable Bluetooth AUDIO_ENABLE = no # Audio output KEY_LOCK_ENABLE = no # Enable KC_LOCK support diff --git a/keyboards/mode/m65s/rules.mk b/keyboards/mode/m65s/rules.mk index c74e1db161..6308c54dde 100644 --- a/keyboards/mode/m65s/rules.mk +++ b/keyboards/mode/m65s/rules.mk @@ -15,7 +15,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -BLUETOOTH_ENABLE = no # Enable Bluetooth AUDIO_ENABLE = no # Audio output EEPROM_DRIVER = i2c # Enter lower-power sleep mode when on the ChibiOS idle thread diff --git a/keyboards/mokey/mokey63/rules.mk b/keyboards/mokey/mokey63/rules.mk index c7ccf409f1..3105d59b77 100644 --- a/keyboards/mokey/mokey63/rules.mk +++ b/keyboards/mokey/mokey63/rules.mk @@ -18,6 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -BLUETOOTH_ENABLE = no # Enable Bluetooth AUDIO_ENABLE = no # Audio output - diff --git a/keyboards/nix_studio/oxalys80/rules.mk b/keyboards/nix_studio/oxalys80/rules.mk index 3da643f9ff..998e0ad73d 100644 --- a/keyboards/nix_studio/oxalys80/rules.mk +++ b/keyboards/nix_studio/oxalys80/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable RGB underglow -BLUETOOTH_ENABLE = no # Enable Bluetooth AUDIO_ENABLE = no # Audio output LTO_ENABLE = yes From 4062860c053ca275a155f62db4680205c0bfb3da Mon Sep 17 00:00:00 2001 From: drhigsby <71532157+drhigsby@users.noreply.github.com> Date: Wed, 22 Sep 2021 18:02:49 -0700 Subject: [PATCH 087/595] [Keyboard] Bkf (#14534) Co-authored-by: Ryan --- keyboards/bkf/bkf.c | 16 +++++++ keyboards/bkf/bkf.h | 53 +++++++++++++++++++++ keyboards/bkf/config.h | 60 ++++++++++++++++++++++++ keyboards/bkf/info.json | 15 ++++++ keyboards/bkf/keymaps/default/keymap.c | 62 +++++++++++++++++++++++++ keyboards/bkf/keymaps/default/readme.md | 1 + keyboards/bkf/readme.md | 21 +++++++++ keyboards/bkf/rules.mk | 23 +++++++++ 8 files changed, 251 insertions(+) create mode 100644 keyboards/bkf/bkf.c create mode 100644 keyboards/bkf/bkf.h create mode 100644 keyboards/bkf/config.h create mode 100644 keyboards/bkf/info.json create mode 100644 keyboards/bkf/keymaps/default/keymap.c create mode 100644 keyboards/bkf/keymaps/default/readme.md create mode 100644 keyboards/bkf/readme.md create mode 100644 keyboards/bkf/rules.mk diff --git a/keyboards/bkf/bkf.c b/keyboards/bkf/bkf.c new file mode 100644 index 0000000000..6df3ed56f6 --- /dev/null +++ b/keyboards/bkf/bkf.c @@ -0,0 +1,16 @@ +/* Copyright 2021 drhigsby + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "bkf.h" diff --git a/keyboards/bkf/bkf.h b/keyboards/bkf/bkf.h new file mode 100644 index 0000000000..3ea53e2de5 --- /dev/null +++ b/keyboards/bkf/bkf.h @@ -0,0 +1,53 @@ +/* Copyright 2021 drhigsby + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ + +#define zzzz KC_NO + +#define LAYOUT_625uC( \ + k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k311, \ + k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, \ + k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, \ + k300, k301, k302, k306, k308, k309, k310 \ +) { \ + { k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011 }, \ + { k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111 }, \ + { k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211 }, \ + { k300, k301, k302, zzzz, zzzz, zzzz, k306, zzzz, k308, k309, k310, k311 } \ +} + +#define LAYOUT_2x3uC( \ + k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k311, \ + k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, \ + k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, \ + k300, k301, k302, k304, k306, k308, k309, k310 \ +) { \ + { k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011 }, \ + { k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111 }, \ + { k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211 }, \ + { k300, k301, k302, zzzz, k304, zzzz, k306, zzzz, k308, k309, k310, k311 } \ +} diff --git a/keyboards/bkf/config.h b/keyboards/bkf/config.h new file mode 100644 index 0000000000..af1b2be747 --- /dev/null +++ b/keyboards/bkf/config.h @@ -0,0 +1,60 @@ +/* Copyright 2021 drhigsby + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define MANUFACTURER DrHigsby +#define PRODUCT BKF - Base Kit Forty +#define VENDOR_ID 0x0007 +#define PRODUCT_ID 0x0003 +#define DEVICE_VER 0x0001 + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ + +/* key matrix pins */ +#define MATRIX_ROW_PINS { F6, F7, B1, B3 } +#define MATRIX_COL_PINS { B6, B2, D3, D2, D1, D0, D4, C6, D7, E6, B4, B5 } +#define UNUSED_PINS + +/* Define encoder pads */ +#define ENCODERS_PAD_A { F4 } +#define ENCODERS_PAD_B { F5 } + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE diff --git a/keyboards/bkf/info.json b/keyboards/bkf/info.json new file mode 100644 index 0000000000..1ab228c1c2 --- /dev/null +++ b/keyboards/bkf/info.json @@ -0,0 +1,15 @@ +{ + "keyboard_name": "BKF - Base Kit Forty", + "url": "http://www.keyboard-layout-editor.com/#/gists/8a9ebae3a5f3f601bb928f7265db0e2e", + "maintainer": "drhigsby", + "layouts": { + "LAYOUT_625uC": { + "layout": [{"label":"Tab", "x":0, "y":0, "w":1.5}, {"label":"Q", "x":1.5, "y":0}, {"label":"W", "x":2.5, "y":0}, {"label":"E", "x":3.5, "y":0}, {"label":"R", "x":4.5, "y":0}, {"label":"T", "x":5.5, "y":0}, {"label":"Y", "x":6.5, "y":0}, {"label":"U", "x":7.5, "y":0}, {"label":"I", "x":8.5, "y":0}, {"label":"O", "x":9.5, "y":0}, {"label":"P", "x":10.5, "y":0}, {"label":"{", "x":11.5, "y":0}, {"label":"}", "x":12.5, "y":0}, {"label":"Caps Lock", "x":0, "y":1, "w":1.75}, {"label":"A", "x":1.75, "y":1}, {"label":"S", "x":2.75, "y":1}, {"label":"D", "x":3.75, "y":1}, {"label":"F", "x":4.75, "y":1}, {"label":"G", "x":5.75, "y":1}, {"label":"H", "x":6.75, "y":1}, {"label":"J", "x":7.75, "y":1}, {"label":"K", "x":8.75, "y":1}, {"label":"L", "x":9.75, "y":1}, {"label":":", "x":10.75, "y":1}, {"label":"Control", "x":11.75, "y":1, "w":1.75}, {"label":"Shift", "x":0, "y":2, "w":2.25}, {"label":"Z", "x":2.25, "y":2}, {"label":"X", "x":3.25, "y":2}, {"label":"C", "x":4.25, "y":2}, {"label":"V", "x":5.25, "y":2}, {"label":"B", "x":6.25, "y":2}, {"label":"N", "x":7.25, "y":2}, {"label":"M", "x":8.25, "y":2}, {"label":"<", "x":9.25, "y":2}, {"label":">", "x":10.25, "y":2}, {"label":"?", "x":11.25, "y":2}, {"label":"Shift", "x":12.25, "y":2, "w":1.25}, {"label":"Ctrl", "x":0, "y":3, "w":1.25}, {"label":"Win", "x":1.25, "y":3, "w":1.25}, {"label":"Alt", "x":2.5, "y":3, "w":1.25}, {"label":"", "x":3.75, "y":3, "w":6.25}, {"label":"Alt", "x":10, "y":3, "w":1.25}, {"label":"Win", "x":11.25, "y":3}, {"label":"Menu", "x":12.25, "y":3, "w":1.25}] + }, + + "LAYOUT_2x3uC": { + "layout": [{"label":"Tab", "x":0, "y":0, "w":1.5}, {"label":"Q", "x":1.5, "y":0}, {"label":"W", "x":2.5, "y":0}, {"label":"E", "x":3.5, "y":0}, {"label":"R", "x":4.5, "y":0}, {"label":"T", "x":5.5, "y":0}, {"label":"Y", "x":6.5, "y":0}, {"label":"U", "x":7.5, "y":0}, {"label":"I", "x":8.5, "y":0}, {"label":"O", "x":9.5, "y":0}, {"label":"P", "x":10.5, "y":0}, {"label":"{", "x":11.5, "y":0}, {"label":"}", "x":12.5, "y":0}, {"label":"Caps Lock", "x":0, "y":1, "w":1.75}, {"label":"A", "x":1.75, "y":1}, {"label":"S", "x":2.75, "y":1}, {"label":"D", "x":3.75, "y":1}, {"label":"F", "x":4.75, "y":1}, {"label":"G", "x":5.75, "y":1}, {"label":"H", "x":6.75, "y":1}, {"label":"J", "x":7.75, "y":1}, {"label":"K", "x":8.75, "y":1}, {"label":"L", "x":9.75, "y":1}, {"label":":", "x":10.75, "y":1}, {"label":"Control", "x":11.75, "y":1, "w":1.75}, {"label":"Shift", "x":0, "y":2, "w":2.25}, {"label":"Z", "x":2.25, "y":2}, {"label":"X", "x":3.25, "y":2}, {"label":"C", "x":4.25, "y":2}, {"label":"V", "x":5.25, "y":2}, {"label":"B", "x":6.25, "y":2}, {"label":"N", "x":7.25, "y":2}, {"label":"M", "x":8.25, "y":2}, {"label":"<", "x":9.25, "y":2}, {"label":">", "x":10.25, "y":2}, {"label":"?", "x":11.25, "y":2}, {"label":"Shift", "x":12.25, "y":2, "w":1.25}, {"label":"Ctrl", "x":0, "y":3, "w":1.25}, {"label":"Win", "x":1.25, "y":3, "w":1.25}, {"label":"Alt", "x":2.5, "y":3, "w":1.25}, {"label":"", "x":3.75, "y":3, "w":3}, {"label":"", "x":6.75, "y":3, "w":3}, {"label":"Alt", "x":9.75, "y":3, "w":1.25}, {"label":"Win", "x":11, "y":3, "w":1.25}, {"label":"Menu", "x":12.25, "y":3, "w":1.25}] + }, + + } +} diff --git a/keyboards/bkf/keymaps/default/keymap.c b/keyboards/bkf/keymaps/default/keymap.c new file mode 100644 index 0000000000..cb047a6816 --- /dev/null +++ b/keyboards/bkf/keymaps/default/keymap.c @@ -0,0 +1,62 @@ +/* Copyright 2021 drhigsby + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +enum layers{ + _BASE, + _NUM, + _FN +}; + +#define NUM MO(_NUM) +#define FN MO(_FN) +#define xxx KC_TRNS + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_625uC( + KC_GESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, KC_DEL, + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, + KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSPC, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, NUM, FN, KC_QUOT + ), + + + [_NUM] = LAYOUT_625uC( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, + KC_CAPS, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_MINS, KC_EQL, KC_PIPE, + xxx, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_HOME, KC_END, xxx, xxx, xxx, xxx, xxx, + xxx, xxx, xxx, xxx, xxx, xxx, xxx + ), + + [_FN] = LAYOUT_625uC( + xxx, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + xxx, xxx, xxx, xxx, xxx, xxx, xxx, xxx, xxx, xxx, xxx, xxx, + xxx, xxx, xxx, xxx, xxx, xxx, xxx, xxx, xxx, xxx, xxx, xxx, + xxx, xxx, xxx, xxx, xxx, xxx, xxx + ) + +}; + +bool encoder_update_user(uint8_t index, bool clockwise) { + if (index == 0) { + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } + return true; +} diff --git a/keyboards/bkf/keymaps/default/readme.md b/keyboards/bkf/keymaps/default/readme.md new file mode 100644 index 0000000000..ea52e61583 --- /dev/null +++ b/keyboards/bkf/keymaps/default/readme.md @@ -0,0 +1 @@ +# Default BKF - Base Kit Forty Keymap diff --git a/keyboards/bkf/readme.md b/keyboards/bkf/readme.md new file mode 100644 index 0000000000..d55f9637ee --- /dev/null +++ b/keyboards/bkf/readme.md @@ -0,0 +1,21 @@ +# BKF - Base Kit Forty + +![BKF](https://i.imgur.com/3vR0yeW.png) + +BKF, Base Kit Forty, is a 40% style keyboard that is fully compatbile with a standard base kit of keycaps with 3 different spacebar configurations. It supports both standard R3 1.75u as well as stepped R3 1.75u on the left side. The key in the top right corner also sports rotary encoder support. + +* Keyboard Maintainer: [H. Bond](https://github.com/drhigsby) +* Hardware Supported: BKF (https://github.com/drhigsby/bkf) +* Hardware Availability: open-source stacked acrylic case design available at maintainer's github / make your own + +Make example for this keyboard (after setting up your build environment): + + make bkf:default + +To place this keyboard into bootloader mode, press the reset button on the PCB or short the RST and GND pins on the pro micro. + +Flashing example for this keyboard: + + make bkf:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/bkf/rules.mk b/keyboards/bkf/rules.mk new file mode 100644 index 0000000000..b39830826d --- /dev/null +++ b/keyboards/bkf/rules.mk @@ -0,0 +1,23 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = caterina + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +LTO_ENABLE = no # Use link time optimization +ENCODER_ENABLE = yes From 618a28c6ae382e84fcf4b40e3247153086c12e43 Mon Sep 17 00:00:00 2001 From: umi <57262844+umi-umi@users.noreply.github.com> Date: Thu, 23 Sep 2021 12:52:53 +0900 Subject: [PATCH 088/595] [Docs] update Japanese translation of one_shot_keys.md (#13656) * update one_shot_keys.md translation * update one_shot_keys.md translation * correct paramter for function * add change of #13754 --- docs/ja/one_shot_keys.md | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) diff --git a/docs/ja/one_shot_keys.md b/docs/ja/one_shot_keys.md index 4e6b2aa9d2..f049c2d6f7 100644 --- a/docs/ja/one_shot_keys.md +++ b/docs/ja/one_shot_keys.md @@ -1,9 +1,9 @@ # ワンショットキー + original document: 0.13.34:docs/one_shot_keys.md + git diff 0.13.34 HEAD -- docs/one_shot_keys.md | cat +---> ワンショットキーは次のキーが押されるまでアクティブのままになり、そのあと放されるキーです。これにより一度に1つ以上のキーを押すことなく、キーボードの組み合わせを入力することができます。これらのキーは通常「スティッキーキー」あるいは「デッドキー」と呼ばれます。 @@ -22,10 +22,13 @@ * `OSM(mod)` - *mod*を一時的に押し続けます。[モッドタップ](ja/mod_tap.md)で示したように、`KC_*` コードでは無く、`MOD_*` キーコードを使わなければなりません。 * `OSL(layer)` - 一時的に*レイヤー*に切り替えます。 +* `OS_ON` - ワンショットキーをオンにします。 +* `OS_OFF` - ワンショットキーをオフにします。OSM は通常の mod キーのように機能し、OSL は `MO` キーのように機能します。 +* `OS_TOGG` - ワンショットキーの状態を切り替えます。 ワンショットキーをマクロあるいはタップダンスルーチンの一部として有効にしたい場合があります。 -ワンショットレイヤーについては、キーを押した時に `set_oneshot_layer(LAYER, ONESHOT_START)` を呼び出し、キーを放した時に `clear_oneshot_layer_state(ONESHOT_OTHER_KEY_PRESSED)` を呼び出す必要があります。ワンショットをキャンセルする場合は、`reset_oneshot_layer()` を呼び出してください。 +ワンショットレイヤーについては、キーを押した時に `set_oneshot_layer(LAYER, ONESHOT_START)` を呼び出し、キーを放した時に `clear_oneshot_layer_state(ONESHOT_PRESSED)` を呼び出す必要があります。ワンショットをキャンセルする場合は、`reset_oneshot_layer()` を呼び出してください。 ワンショットモッドについては、設定するためには `set_oneshot_mods(MOD_BIT(KC_*))` を呼び出し、キャンセルするためには `clear_oneshot_mods()` を呼び出す必要があります。 From 7bfc6083b75ec148c98487bece596f6e12c17e2c Mon Sep 17 00:00:00 2001 From: umi <57262844+umi-umi@users.noreply.github.com> Date: Thu, 23 Sep 2021 12:55:19 +0900 Subject: [PATCH 089/595] [Docs] update Japanese translation of feature_leader_key.md (#13669) * update feature_leader_key.md translation * update file based on comments * update text based on comments --- docs/ja/feature_leader_key.md | 17 +++++++++++++++-- 1 file changed, 15 insertions(+), 2 deletions(-) diff --git a/docs/ja/feature_leader_key.md b/docs/ja/feature_leader_key.md index 61d6f5a8e0..b826b068eb 100644 --- a/docs/ja/feature_leader_key.md +++ b/docs/ja/feature_leader_key.md @@ -1,8 +1,8 @@ # リーダーキー: 新しい種類のモディファイア もしあなたが Vim を使ったことがある場合、リーダーキーは何であるかを知っています。そうでなければ、素晴らしい概念を発見しようとしています。:) 例えば、Alt+Shift+W を押す(3つのキーを同時に押す)代わりに、キーの_シーケンス_を押すことができたらどうでしょう？つまり、特別なモディファイア (リーダーキー)を押して、続けて W と C を押すと (単純にキーを高速に繋げます)、何かが起こります。 @@ -77,6 +77,19 @@ SEQ_THREE_KEYS(KC_C, KC_C, KC_C) { } ``` +## リーダーキーの無限タイムアウト + +リーダーキーが、シーケンスの残りのキーのような快適な場所にない場合があります。リーダーキーが右上の外側のキーの1つである場合、リーダーキーに届くように手の位置を変えなければならないことがあります。 +これにより、シーケンスの大部分をすばやく入力できたとしても、シーケンス全体を時間通りに入力するのが難しい場合があります。例えば、シーケンスが `Leader + asd` の場合、手をホーム行に置けば `asd` を素早く打つのは非常に簡単です。しかし、リーダーキーに届くようにホーム行から手を移動し、戻った後、時間内にシーケンスを開始することはできません。 +この状況が手に与えるストレスを取り除くために、リーダーキーだけに無限のタイムアウトを有効にすることができます。つまり、リーダーキーを押した後、シーケンスの残りを開始するまでの時間が無限になり、シーケンスの残りを快適に入力するための最適な位置に手を置くことができます。 +この無限のタイムアウトはリーダーキーにのみ影響するため、前述の `Leader + asd` の例では、`Leader` と `a` の間に無限の時間があります。ただし、シーケンスを開始すると、(グローバルまたはキーごとに)設定したタイムアウトは正常に機能します。 +このようにして、非常に短い `LEADER_TIMEOUT` を設定できますが、それでも手を置く時間は十分にあります。 + +これを有効にするには、以下を `config.h` に配置します: +```c +#define LEADER_NO_TIMEOUT +``` + ## 厳密なキー処理 デフォルトでは、リーダーキー機能は、リーダーシーケンスの確認時に [`モッドタップ`](ja/mod_tap.md) および [`レイヤータップ`](ja/feature_layers.md#switching-and-toggling-layers) 機能からのキーコードをフィルターします。つまり、`LT(3, KC_A)` を使っている場合、`LT(3, KC_A)` ではなくシーケンスの `KC_A` として取り出され、新しいユーザにとってより期待される動作を提供します。 From 53475773461c3a76ee253d99efef2a693fa1fca3 Mon Sep 17 00:00:00 2001 From: umi <57262844+umi-umi@users.noreply.github.com> Date: Thu, 23 Sep 2021 12:58:56 +0900 Subject: [PATCH 090/595] [Docs] update Japanese translation of isp_flashing_guide.md (#13700) * update isp_flashing_guide.md translation * update isp_flashing_guide.md translation * correct url * trim remaining merge identifier --- docs/ja/isp_flashing_guide.md | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-) diff --git a/docs/ja/isp_flashing_guide.md b/docs/ja/isp_flashing_guide.md index 6a6066b24b..d629b964b2 100644 --- a/docs/ja/isp_flashing_guide.md +++ b/docs/ja/isp_flashing_guide.md @@ -2,8 +2,8 @@ ISP 書き込み(ICSP 書き込みと呼ぶ場合もあります)とは、マイクロコントローラーを直接プログラミングするプロセスです。 @@ -52,6 +52,7 @@ QMK の ISP 書き込みの主な用途は、AVRベースのコントローラ * [SparkFun PocketAVR](https://www.sparkfun.com/products/9825) - (USB Tiny) * [USBtinyISP AVR Programmer Kit](https://www.adafruit.com/product/46) - (USB Tiny) +* [USBasp](https://www.fischl.de/usbasp/) - (usbasp) * [Teensy 2.0](https://www.pjrc.com/store/teensy.html) - (avrisp) * [Pro Micro](https://www.sparkfun.com/products/12640) - (avrisp) * [Bus Pirate](https://www.adafruit.com/product/237) - (buspirate) @@ -77,8 +78,8 @@ Teensy と Pro Micro のコントローラを ISP プログラマとして使用 QMK ツールボックスは、このほとんど（すべて）に使用することができます。 -ただし、Teensy 2.0 ボードを使っている場合は、[Teensy Loader](https:/www.pjrc.comteensyloader.html) を使えば、Teensy 2.0 ボードに書き込むことができます。 -あるいは、`avrdude` (`qmk_install.sh` の一部としてインストールされています) や、[AVRDUDESS](https:/blog.zakkemble.netavrdudess-a-gui-for-avrdude)(Windows 用) を使って、Pro Micro に書き込んだり、ISP を書き込んだりすることができます。 +ただし、Teensy 2.0 ボードを使っている場合は、[Teensy Loader](https://www.pjrc.com/teensy/loader.html) を使えば、Teensy 2.0 ボードに書き込むことができます。 +あるいは、`avrdude` (`qmk_install.sh` の一部としてインストールされています) や、[AVRDUDESS](https://blog.zakkemble.net/avrdudess-a-gui-for-avrdude/) (Windows 用) を使って、Pro Micro に書き込んだり、ISP を書き込んだりすることができます。 ## 配線 @@ -93,6 +94,15 @@ QMK ツールボックスは、このほとんど（すべて）に使用する PocketAVR VCC <-> Keyboard VCC PocketAVR GND <-> Keyboard GND +### USBasp + + USBasp RST <-> Keyboard RESET + USBasp SCLK <-> Keyboard B1 (SCLK) + USBasp MOSI <-> Keyboard B2 (MOSI) + USBasp MISO <-> Keyboard B3 (MISO) + USBasp VCC <-> Keyboard VCC + USBasp GND <-> Keyboard GND + ### Teensy 2.0 Teensy B0 <-> Keyboard RESET @@ -180,7 +190,7 @@ QMK DFU ブートローダは `atmega32u4` コントローラ (AVR ベースの ### QMK Toolbox -1. 'AVRISP device connected' または `USB Tiny device connected` が黄色で表示されます。 +1. `AVRISP device connected` または `USB Tiny device connected` が黄色で表示されます。 2. `Open` ダイアログで正しいブートローダー/プロダクションの .hex ファイルを選択します（パスにスペースを含めることはできません） 3. 書きこもうとしているキーボード（ISP プログラマではなく）のための正しい `Microcontroller` オプションが選択されていることを確認してください。 4. `Flash` を押します @@ -277,7 +287,7 @@ High ヒューズは 0xD9 か 0x99 のどちらかになります。 avrdude -c avrisp -P COM3 -p atmega32u4 -U flash:w:main.hex:i -U lfuse:w:0xFF:m -U hfuse:w:0xD8:m -U efuse:w:0xCB:m -別のコントローラーを使用している場合や、別の設定を希望する場合は、この[AVR ヒューズ計算機](https://www.engbedded.com/fusecalc)を使用して、より適切な値を見つけることができます。 +別のコントローラーを使用している場合や、別の設定を希望する場合は、この[AVR ヒューズ計算機](https://www.engbedded.com/fusecalc/)を使用して、より適切な値を見つけることができます。 ## ヘルプ From 7f0c397c72a3e4ba68e3b5c1a28cd57b7b0ad6f1 Mon Sep 17 00:00:00 2001 From: umi <57262844+umi-umi@users.noreply.github.com> Date: Thu, 23 Sep 2021 13:01:42 +0900 Subject: [PATCH 091/595] [Docs] update Japanese translation of feature_advanced_keycodes.md (#14309) * update feature_advanced_keycodes.md translation * update file based on comments --- docs/ja/feature_advanced_keycodes.md | 43 +++++++++++++++------------- 1 file changed, 23 insertions(+), 20 deletions(-) diff --git a/docs/ja/feature_advanced_keycodes.md b/docs/ja/feature_advanced_keycodes.md index 887d9babc2..2416c742a0 100644 --- a/docs/ja/feature_advanced_keycodes.md +++ b/docs/ja/feature_advanced_keycodes.md @@ -1,30 +1,33 @@ # 修飾キー :id=modifier-keys 以下のようにキーコードとモディファイアを組み合わせることができます。押すと、モディファイアのキーダウンイベントが送信され、次に `kc` のキーダウンイベントが送信されます。放すと、`kc` のキーアップイベントが送信され、次にモディファイアのキーアップイベントが送信されます。 -| キー | エイリアス | 説明 | -| ---------- | ------------------------------- | ------------------------------------------------------------------- | -| `LCTL(kc)` | `C(kc)` | 左 Control を押しながら `kc` を押します。 | -| `LSFT(kc)` | `S(kc)` | 左 Shift を押しながら `kc` を押します。 | -| `LALT(kc)` | `A(kc)`, `LOPT(kc)` | 左 Alt を押しながら `kc`を押します。 | -| `LGUI(kc)` | `G(kc)`, `LCMD(kc)`, `LWIN(kc)` | 左 GUI を押しながら `kc` を押します。 | -| `RCTL(kc)` | | 右 Control を押しながら `kc` を押します。 | -| `RSFT(kc)` | | 右 Shift を押しながら `kc` を押します。 | -| `RALT(kc)` | `ROPT(kc)`, `ALGR(kc)` | 右 Alt を押しながら `kc` を押します。 | -| `RGUI(kc)` | `RCMD(kc)`, `LWIN(kc)` | 右 GUI を押しながら `kc` を押します。 | -| `SGUI(kc)` | `SCMD(kc)`, `SWIN(kc)` | 左 Shift と左 GUI を押しながら `kc` を押します。 | -| `LCA(kc)` | | 左 Control と左 Alt を押しながら `kc` を押します。 | -| `LSA(kc)` | | 左 Shift と左 Alt を押しながら `kc` を押します。 | -| `RSA(kc)` | `SAGR(kc)` | 右 Shift と右 Alt (AltGr) を押しながら `kc` を押します。 | -| `RCS(kc)` | | 右 Control と右 Shift を押しながら `kc` を押します。 | -| `LCAG(kc)` | | 左 Control、左 Alt、左 GUI を押しながら `kc` を押します。 | -| `MEH(kc)` | | 左 Control、左 Shift、左 Alt を押しながら `kc` を押します。 | -| `HYPR(kc)` | | 左 Control、左 Shift、左 Alt、左 GUI を押しながら `kc` を押します。 | +| キー | エイリアス | 説明 | +| ---------- | ---------------------------------- | ------------------------------------------------------------------- | +| `LCTL(kc)` | `C(kc)` | 左 Control を押しながら `kc` を押します。 | +| `LSFT(kc)` | `S(kc)` | 左 Shift を押しながら `kc` を押します。 | +| `LALT(kc)` | `A(kc)`, `LOPT(kc)` | 左 Alt を押しながら `kc`を押します。 | +| `LGUI(kc)` | `G(kc)`, `LCMD(kc)`, `LWIN(kc)` | 左 GUI を押しながら `kc` を押します。 | +| `RCTL(kc)` | | 右 Control を押しながら `kc` を押します。 | +| `RSFT(kc)` | | 右 Shift を押しながら `kc` を押します。 | +| `RALT(kc)` | `ROPT(kc)`, `ALGR(kc)` | 右 Alt を押しながら `kc` を押します。 | +| `RGUI(kc)` | `RCMD(kc)`, `LWIN(kc)` | 右 GUI を押しながら `kc` を押します。 | +| `LSG(kc)` | `SGUI(kc)`, `SCMD(kc)`, `SWIN(kc)` | 左 Shift と左 GUI を押しながら `kc` を押します。 | +| `LAG(kc)` | | 左 Alt と左 GUI を押しながら `kc` を押します。 | +| `RSG(kc)` | | 右 Shift と右 GUI を押しながら `kc` を押します。 | +| `RAG(kc)` | | 右 Alt と右 GUI を押しながら `kc` を押します。 | +| `LCA(kc)` | | 左 Control と左 Alt を押しながら `kc` を押します。 | +| `LSA(kc)` | | 左 Shift と左 Alt を押しながら `kc` を押します。 | +| `RSA(kc)` | `SAGR(kc)` | 右 Shift と右 Alt (AltGr) を押しながら `kc` を押します。 | +| `RCS(kc)` | | 右 Control と右 Shift を押しながら `kc` を押します。 | +| `LCAG(kc)` | | 左 Control、左 Alt、左 GUI を押しながら `kc` を押します。 | +| `MEH(kc)` | | 左 Control、左 Shift、左 Alt を押しながら `kc` を押します。 | +| `HYPR(kc)` | | 左 Control、左 Shift、左 Alt、左 GUI を押しながら `kc` を押します。 | また、それらを繋げることができます。例えば、`LCTL(LALT(KC_DEL))` または `C(A(KC_DEL))` は1回のキー押下で Control+Alt+Delete を送信するキーを作成します。 From 0fc15f4d30311402bb6dbf74806a0c5ed00cb135 Mon Sep 17 00:00:00 2001 From: umi <57262844+umi-umi@users.noreply.github.com> Date: Thu, 23 Sep 2021 13:02:32 +0900 Subject: [PATCH 092/595] [Docs] update Japanese translation of feature_backlight.md (#14403) * update feature_backlight.md translation * update file based on comments --- docs/ja/feature_backlight.md | 47 +++++++++++++++++++----------------- 1 file changed, 25 insertions(+), 22 deletions(-) diff --git a/docs/ja/feature_backlight.md b/docs/ja/feature_backlight.md index 88afa6c5fe..150069607c 100644 --- a/docs/ja/feature_backlight.md +++ b/docs/ja/feature_backlight.md @@ -1,8 +1,8 @@ # バックライト :id=backlighting 多くのキーボードは、キースイッチを貫通して配置されたり、キースイッチの下に配置された個々の LED によって、バックライトキーをサポートします。この機能は通常スイッチごとに単一の色しか使用できないため、[RGB アンダーグロー](ja/feature_rgblight.md)および [RGB マトリックス](ja/feature_rgb_matrix.md)機能のどちらとも異なりますが、キーボードに複数の異なる単一色の LED を取り付けることは当然可能です。 @@ -67,14 +67,17 @@ BACKLIGHT_DRIVER = software バックライトを設定するには、`config.h` の中で以下の `#define` をします: -| 定義 | デフォルト | 説明 | -| --------------------- | ---------- | ------------------------------------------------------------------------------------------- | -| `BACKLIGHT_PIN` | *定義なし* | LED を制御するピン | -| `BACKLIGHT_LEVELS` | `3` | 輝度のレベルの数 (オフを除いて最大 31) | -| `BACKLIGHT_CAPS_LOCK` | *定義なし* | バックライトを使って Caps Lock のインジケータを有効にする (専用 LED の無いキーボードのため) | -| `BACKLIGHT_BREATHING` | *定義なし* | サポートされる場合は、バックライトの明滅動作を有効にする | -| `BREATHING_PERIOD` | `6` | 各バックライトの "明滅" の長さ（秒） | -| `BACKLIGHT_ON_STATE` | `1` | バックライトが "オン" の時のバックライトピンの状態 - high の場合は `1`、low の場合は `0` | +| 定義 | デフォルト | 説明 | +| ----------------------------- | ------------------ | --------------------------------------------------------------------------------------------- | +| `BACKLIGHT_PIN` | *定義なし* | LED を制御するピン | +| `BACKLIGHT_LEVELS` | `3` | 輝度のレベルの数 (オフを除いて最大 31) | +| `BACKLIGHT_CAPS_LOCK` | *定義なし* | バックライトを使って Caps Lock のインジケータを有効にする (専用 LED の無いキーボードのため) | +| `BACKLIGHT_BREATHING` | *定義なし* | サポートされる場合は、バックライトの明滅動作を有効にする | +| `BREATHING_PERIOD` | `6` | 各バックライトの "明滅" の長さ（秒） | +| `BACKLIGHT_ON_STATE` | `1` | バックライトが "オン" の時のバックライトピンの状態 - high の場合は `1`、low の場合は `0` | +| `BACKLIGHT_LIMIT_VAL` | `255` | バックライトの最大デューティサイクル -- `255` で最大輝度になり、それ未満では最大値が減少する | +| `BACKLIGHT_DEFAULT_LEVEL` | `BACKLIGHT_LEVELS` | EEPROM をクリアする時に使うデフォルトのバックライトレベル | +| `BACKLIGHT_DEFAULT_BREATHING` | *定義なし* | EEPROM をクリアする時に、バックライトのブリージングを有効にするかどうか | 独自のキーボードを設計しているわけではない限り、通常は `BACKLIGHT_PIN` または `BACKLIGHT_ON_STATE` を変更する必要はありません。 @@ -97,18 +100,18 @@ BACKLIGHT_DRIVER = pwm AVR ボードでは、QMK はどのドライバを使うかを以下の表に従って自動的に決定します: -| バックライトピン | AT90USB64/128 | ATmega16/32U4 | ATmega16/32U2 | ATmega32A | ATmega328/P | -| ---------------- | ------------- | ------------- | ------------- | --------- | ----------- | -| `B1` | | | | | Timer 1 | -| `B2` | | | | | Timer 1 | -| `B5` | Timer 1 | Timer 1 | | | | -| `B6` | Timer 1 | Timer 1 | | | | -| `B7` | Timer 1 | Timer 1 | Timer 1 | | | -| `C4` | Timer 3 | | | | | -| `C5` | Timer 3 | | Timer 1 | | | -| `C6` | Timer 3 | Timer 3 | Timer 1 | | | -| `D4` | | | | Timer 1 | | -| `D5` | | | | Timer 1 | | +| バックライトピン | AT90USB64/128 | AT90USB162 | ATmega16/32U4 | ATmega16/32U2 | ATmega32A | ATmega328/P | +| ---------------- | ------------- | ---------- | ------------- | ------------- | --------- | ----------- | +| `B1` | | | | | | Timer 1 | +| `B2` | | | | | | Timer 1 | +| `B5` | Timer 1 | | Timer 1 | | | | +| `B6` | Timer 1 | | Timer 1 | | | | +| `B7` | Timer 1 | Timer 1 | Timer 1 | Timer 1 | | | +| `C4` | Timer 3 | | | | | | +| `C5` | Timer 3 | Timer 1 | | Timer 1 | | | +| `C6` | Timer 3 | Timer 1 | Timer 3 | Timer 1 | | | +| `D4` | | | | | Timer 1 | | +| `D5` | | | | | Timer 1 | | 他の全てのピンはタイマー支援ソフトウェア PWM を使います。 From 62ef4a9c8a05d52000504eabef0f1d92a74ade86 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Thu, 23 Sep 2021 07:49:02 +0000 Subject: [PATCH 093/595] Meira Refactor (#14566) * clean up keyboard header files * use #pragma once include guard * convert tabs to spaces * remove redundant #include statements * update revision references to main header (`../meira.h` -> `meira.h`) * refactor default keymap * use LAYOUT as layout macro reference * use enum statement for layer indexes; make layers contiguous * use four-space indent * update keycode grid alignment * update layout macro aliases * move layout macro aliases to info.json * alias KEYMAP to LAYOUT_ortho_4x12 so the user keymaps don't have to be edited * touch up meira.h There's no Planck MIT layout reference here. * add copyright headers * workaround patch for grahampheath keymap The `matrix_init_kb()` function in `meira.c` calls `backlight_set()`, but the grahampheath keymap disables Backlight to make space for Audio, causing the firmware to fail to compile. This commit wraps the `backlight_set()` call in an ifdef statement, so the call is excluded if Backlight is disabled. * clean up rules.mk inline comments * re-order rules.mk settings * clean up readme.md * correct link to keyboard image * change metadata section to unordered list * spelling corrections * update make instructions and Docs links --- keyboards/meira/featherble/featherble.c | 16 + keyboards/meira/featherble/featherble.h | 24 +- keyboards/meira/info.json | 4 + keyboards/meira/keymaps/default/keymap.c | 459 ++++++++++++----------- keyboards/meira/meira.c | 2 + keyboards/meira/meira.h | 25 +- keyboards/meira/promicro/promicro.c | 17 +- keyboards/meira/promicro/promicro.h | 23 +- keyboards/meira/readme.md | 25 +- keyboards/meira/rules.mk | 17 +- 10 files changed, 330 insertions(+), 282 deletions(-) diff --git a/keyboards/meira/featherble/featherble.c b/keyboards/meira/featherble/featherble.c index 560f0db297..63ade21904 100644 --- a/keyboards/meira/featherble/featherble.c +++ b/keyboards/meira/featherble/featherble.c @@ -1 +1,17 @@ +/* Copyright 2017 Cole Markham, WoodKeys.click + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + #include "meira.h" diff --git a/keyboards/meira/featherble/featherble.h b/keyboards/meira/featherble/featherble.h index b7599b9941..eab7c639b9 100644 --- a/keyboards/meira/featherble/featherble.h +++ b/keyboards/meira/featherble/featherble.h @@ -1,9 +1,19 @@ -#ifndef FEATHERBLE_H -#define FEATHERBLE_H +/* Copyright 2017 Cole Markham, WoodKeys.click + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ -#include "../meira.h" +#pragma once -#include "quantum.h" - - -#endif +#include "meira.h" diff --git a/keyboards/meira/info.json b/keyboards/meira/info.json index 0e3dd76efd..0e2f12a96a 100644 --- a/keyboards/meira/info.json +++ b/keyboards/meira/info.json @@ -2,6 +2,10 @@ "keyboard_name": "Meira", "url": "", "maintainer": "colemarkham", + "layout_aliases": { + "KEYMAP": "LAYOUT_ortho_4x12", + "LAYOUT": "LAYOUT_ortho_4x12" + }, "layouts": { "LAYOUT_ortho_4x12": { "layout": [ diff --git a/keyboards/meira/keymaps/default/keymap.c b/keyboards/meira/keymaps/default/keymap.c index fcb9796d79..c4d6759ea7 100644 --- a/keyboards/meira/keymaps/default/keymap.c +++ b/keyboards/meira/keymaps/default/keymap.c @@ -17,24 +17,26 @@ #include "lighting.h" #ifdef RGBLIGHT_ENABLE -//Following line allows macro to read current RGB settings +// Following line allows macro to read current RGB settings extern rgblight_config_t rgblight_config; #endif -#define _QWERTY 0 -#define _COLEMAK 1 -#define _DVORAK 2 -#define _LOWER 3 -#define _RAISE 4 -#define _ADJUST 16 +enum layer_names { + _QWERTY, + _COLEMAK, + _DVORAK, + _LOWER, + _RAISE, + _ADJUST +}; enum custom_keycodes { - QWERTY = SAFE_RANGE, - COLEMAK, - DVORAK, - LOWER, - RAISE, - ADJUST, + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + LOWER, + RAISE, + ADJUST }; #ifdef AUDIO_ENABLE @@ -42,257 +44,256 @@ enum custom_keycodes { float tone_my_startup[][2] = SONG(ODE_TO_JOY); float tone_my_goodbye[][2] = SONG(ROCK_A_BYE_BABY); -float tone_qwerty[][2] = SONG(QWERTY_SOUND); -float tone_dvorak[][2] = SONG(DVORAK_SOUND); -float tone_colemak[][2] = SONG(COLEMAK_SOUND); +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); #endif /* AUDIO_ENABLE */ // define variables for reactive RGB bool TOG_STATUS = false; -int RGB_current_mode; +int RGB_current_mode; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Qwerty - * ,-----------------------------------------------------------------------------------. - * | Esc | Q | W | E | R | T | Y | U | I | O | P | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Tab | A | S | D | F | G | H | J | K | L | ; | ' | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * |Adjust| Ctrl | Ctrl | Alt |Lower | Cmd |Space |Raise | Left | Down | Up |Right | - * `-----------------------------------------------------------------------------------' - */ - [_QWERTY] = KEYMAP( \ - KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ - KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, \ - ADJUST, KC_LCTL, KC_LALT, KC_LALT, LOWER, KC_LGUI, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ - ), + /* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Esc | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Tab | A | S | D | F | G | H | J | K | L | ; | ' | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |Adjust| Ctrl | Alt | Alt |Lower | Cmd |Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ + [_QWERTY] = LAYOUT( \ + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, \ + ADJUST, KC_LCTL, KC_LALT, KC_LALT, LOWER, KC_LGUI, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ + ), - /* Colemak - * ,-----------------------------------------------------------------------------------. - * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | A | R | S | T | D | H | N | E | I | O | " | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | - * `-----------------------------------------------------------------------------------' - */ - [_COLEMAK] = KEYMAP( \ - KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, \ - KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, \ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ - ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ - ), + /* Colemak + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ + [_COLEMAK] = LAYOUT( \ + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, \ + KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, \ + ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ + ), - /* Dvorak - * ,-----------------------------------------------------------------------------------. - * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | Esc | A | O | E | U | I | D | H | T | N | S | / | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | - * `-----------------------------------------------------------------------------------' - */ - [_DVORAK] = KEYMAP( \ - KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, \ - KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, \ - KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT , \ - ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ - ), + /* Dvorak + * ,-----------------------------------------------------------------------------------. + * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | O | E | U | I | D | H | T | N | S | / | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ + [_DVORAK] = LAYOUT( \ + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, \ + KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, \ + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT, \ + ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ + ), - /* Lower - * ,-----------------------------------------------------------------------------------. - * | | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | ~ | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | | \ | | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | Next | Vol- | Vol+ | Play | - * `-----------------------------------------------------------------------------------' - */ - [_LOWER] = KEYMAP( \ - _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, \ - KC_TILD, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, KC_QUOT, \ - _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END \ - ), + /* Lower + * ,-----------------------------------------------------------------------------------. + * | | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | ~ | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | | \ | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ + [_LOWER] = LAYOUT( \ + _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, \ + KC_TILD, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, S(KC_NUHS), S(KC_NUBS), _______, _______, KC_QUOT, \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END \ + ), - /* Raise - * ,-----------------------------------------------------------------------------------. - * | | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | ` | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | |Enter | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | Home | PgUp | PgDn | End | - * `-----------------------------------------------------------------------------------' - */ - [_RAISE] = KEYMAP( \ - _______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \ - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END \ - ), + /* Raise + * ,-----------------------------------------------------------------------------------. + * | | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | ` | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | Home | PgUp | PgDn | End | + * `-----------------------------------------------------------------------------------' + */ + [_RAISE] = LAYOUT( \ + _______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \ + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END \ + ), - /* Adjust (Lower + Raise) - * ,-----------------------------------------------------------------------------------. - * | | Reset| | | | | | | | | | Del | - * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | - * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | | | | | | | | | | | | - * |------+------+------+------+------+------+------+------+------+------+------+------| - * | | | | | | | | | | | | - * `-----------------------------------------------------------------------------------' - */ - [_ADJUST] = KEYMAP( \ - BL_TOGG, RESET, _______, KC_MRWD, KC_MPLY, KC_MFFD, KC_PSCR, _______, KC_MUTE, KC_VOLD, KC_VOLU, KC_DEL, \ - BL_STEP, RGB_MOD, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, KC_PSCR, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ - ) + /* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | | Reset| | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ + [_ADJUST] = LAYOUT( \ + BL_TOGG, RESET, _______, KC_MRWD, KC_MPLY, KC_MFFD, KC_PSCR, _______, KC_MUTE, KC_VOLD, KC_VOLU, KC_DEL, \ + BL_STEP, RGB_MOD, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, KC_PSCR, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + ) }; // Setting ADJUST layer RGB back to default void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) { - if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { + if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) { #ifdef RGBLIGHT_ENABLE - rgblight_mode(RGB_current_mode); + rgblight_mode(RGB_current_mode); #endif - layer_on(layer3); - } else { - layer_off(layer3); - } + layer_on(layer3); + } else { + layer_off(layer3); + } } bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case QWERTY: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_SONG(tone_qwerty); - #endif -// persistent_default_layer_set(1UL<<_QWERTY); - } - return false; - break; - case COLEMAK: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_SONG(tone_colemak); - #endif -// persistent_default_layer_set(1UL<<_COLEMAK); - } - return false; - break; - case DVORAK: - if (record->event.pressed) { - #ifdef AUDIO_ENABLE - PLAY_SONG(tone_dvorak); - #endif -// persistent_default_layer_set(1UL<<_DVORAK); - } - return false; - break; - case LOWER: - if (record->event.pressed) { - //not sure how to have keyboard check mode and set it to a variable, so my work around - //uses another variable that would be set to true after the first time a reactive key is pressed. - if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false - } else { - TOG_STATUS = !TOG_STATUS; -#ifdef RGBLIGHT_ENABLE - rgblight_mode(16); + switch (keycode) { + case QWERTY: + if (record->event.pressed) { +#ifdef AUDIO_ENABLE + PLAY_SONG(tone_qwerty); +#endif + // persistent_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { +#ifdef AUDIO_ENABLE + PLAY_SONG(tone_colemak); +#endif + // persistent_default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { +#ifdef AUDIO_ENABLE + PLAY_SONG(tone_dvorak); #endif + // persistent_default_layer_set(1UL<<_DVORAK); } - layer_on(_LOWER); - update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); - } else { + return false; + break; + case LOWER: + if (record->event.pressed) { + // not sure how to have keyboard check mode and set it to a variable, so my work around + // uses another variable that would be set to true after the first time a reactive key is pressed. + if (TOG_STATUS) { // TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false + } else { + TOG_STATUS = !TOG_STATUS; #ifdef RGBLIGHT_ENABLE - rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change + rgblight_mode(16); #endif - TOG_STATUS = false; - layer_off(_LOWER); - update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case RAISE: - if (record->event.pressed) { - //not sure how to have keyboard check mode and set it to a variable, so my work around - //uses another variable that would be set to true after the first time a reactive key is pressed. - if (TOG_STATUS) { //TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false + } + layer_on(_LOWER); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); } else { - TOG_STATUS = !TOG_STATUS; #ifdef RGBLIGHT_ENABLE - rgblight_mode(15); + rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change #endif + TOG_STATUS = false; + layer_off(_LOWER); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); } - layer_on(_RAISE); - update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); - } else { + return false; + break; + case RAISE: + if (record->event.pressed) { + // not sure how to have keyboard check mode and set it to a variable, so my work around + // uses another variable that would be set to true after the first time a reactive key is pressed. + if (TOG_STATUS) { // TOG_STATUS checks is another reactive key currently pressed, only changes RGB mode if returns false + } else { + TOG_STATUS = !TOG_STATUS; #ifdef RGBLIGHT_ENABLE - rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change + rgblight_mode(15); #endif - layer_off(_RAISE); - TOG_STATUS = false; - update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); - } - return false; - break; - case ADJUST: - // FIXME add RGB feedback - if (record->event.pressed) { - layer_on(_ADJUST); - } else { - layer_off(_ADJUST); - } - return false; - break; - case BL_TOGG: + } + layer_on(_RAISE); + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } else { +#ifdef RGBLIGHT_ENABLE + rgblight_mode(RGB_current_mode); // revert RGB to initial mode prior to RGB mode change +#endif + layer_off(_RAISE); + TOG_STATUS = false; + update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case ADJUST: + // FIXME add RGB feedback + if (record->event.pressed) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + return false; + break; + case BL_TOGG: #ifdef BACKLIGHT_ENABLE - if (record->event.pressed) { - print("Enabling backlight\n"); - backlight_init_ports(); - } + if (record->event.pressed) { + print("Enabling backlight\n"); + backlight_init_ports(); + } #endif - return false; - break; - case BL_STEP: - if (record->event.pressed) { - print("Stepping backlight\n"); + return false; + break; + case BL_STEP: + if (record->event.pressed) { + print("Stepping backlight\n"); #ifdef BACKLIGHT_ENABLE - print("Really stepping backlight\n"); - backlight_step(); + print("Really stepping backlight\n"); + backlight_step(); #endif - - } - return false; - break; - //led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released + } + return false; + break; + // led operations - RGB mode change now updates the RGB_current_mode to allow the right RGB mode to be set after reactive keys are released #ifdef RGBLIGHT_ENABLE - case RGB_MOD: - if (record->event.pressed) { - rgblight_mode(RGB_current_mode); - rgblight_step(); - RGB_current_mode = rgblight_config.mode; - } - return false; - break; + case RGB_MOD: + if (record->event.pressed) { + rgblight_mode(RGB_current_mode); + rgblight_step(); + RGB_current_mode = rgblight_config.mode; + } + return false; + break; #endif -// case BL_INC: -// meira_inc_backlight_level(); -// return false; -// break; - } - return true; + // case BL_INC: + // meira_inc_backlight_level(); + // return false; + // break; + } + return true; } diff --git a/keyboards/meira/meira.c b/keyboards/meira/meira.c index 7879875db7..e900fd0dd6 100644 --- a/keyboards/meira/meira.c +++ b/keyboards/meira/meira.c @@ -30,7 +30,9 @@ void matrix_init_kb(void) #ifdef ISSI_ENABLE issi_init(); #endif +#ifdef BACKLIGHT_ENABLE backlight_set(5); +#endif #ifdef WATCHDOG_ENABLE // This is done after turning the layer LED red, if we're caught in a loop // we should get a flashing red light diff --git a/keyboards/meira/meira.h b/keyboards/meira/meira.h index d968394400..55fccf5de5 100644 --- a/keyboards/meira/meira.h +++ b/keyboards/meira/meira.h @@ -13,8 +13,7 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ -#ifndef MEIRA_H -#define MEIRA_H +#pragma once #include "quantum.h" #include "issi.h" @@ -22,23 +21,17 @@ void reset_keyboard_kb(void); // This a shortcut to help you visually see your layout. -// The following is an example using the Planck MIT layout // The first section contains all of the arguments // The second converts the arguments into a two-dimensional array #define LAYOUT_ortho_4x12( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ - k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \ ) \ { \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \ - { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b } \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b } \ } - -#define LAYOUT LAYOUT_ortho_4x12 - -#endif - diff --git a/keyboards/meira/promicro/promicro.c b/keyboards/meira/promicro/promicro.c index cf579c89b2..63ade21904 100644 --- a/keyboards/meira/promicro/promicro.c +++ b/keyboards/meira/promicro/promicro.c @@ -1,2 +1,17 @@ -#include "meira.h" +/* Copyright 2017 Cole Markham, WoodKeys.click + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "meira.h" diff --git a/keyboards/meira/promicro/promicro.h b/keyboards/meira/promicro/promicro.h index 9e6800b497..eab7c639b9 100644 --- a/keyboards/meira/promicro/promicro.h +++ b/keyboards/meira/promicro/promicro.h @@ -1,8 +1,19 @@ -#ifndef FEATHERBLE_H -#define FEATHERBLE_H +/* Copyright 2017 Cole Markham, WoodKeys.click + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ -#include "../meira.h" +#pragma once -#include "quantum.h" - -#endif +#include "meira.h" diff --git a/keyboards/meira/readme.md b/keyboards/meira/readme.md index 10c27ee94e..716eb7445d 100644 --- a/keyboards/meira/readme.md +++ b/keyboards/meira/readme.md @@ -1,26 +1,23 @@ # Meira -![Miera](https://imgur.com/kF4MFlW) +![Meira](https://i.imgur.com/kF4MFlWh.jpeg) A 4x12 ortholinear low-profile keyboard. -Keyboard Maintainer: [Cole Markham](https://github.com/colemarkham) -Hardware Supported: Meira/ProMicro, Meira/FeatherBLE -Hardware Availability: [WoodKeys.click](https://woodkeys.click/meira) +* Keyboard Maintainer: [Cole Markham](https://github.com/colemarkham) +* Hardware Supported: Meira/ProMicro, Meira/FeatherBLE +* Hardware Availability: [WoodKeys.click](https://woodkeys.click/meira) -Two controllers are support: the Pro Micro, and the Adafruit Feather BLE 32u4. Support for each is defined as a hardware revision subfolder in QMK. Main differences include processor frequencies and matrix pinouts. +Two controllers are supported: the Pro Micro, and the Adafruit Feather BLE 32u4. Support for each is defined as a hardware revision subfolder in QMK. Main differences include processor frequencies and matrix pinouts. -Make example for this keyboard (after setting up your build environment): +Make examples for this keyboard (after setting up your build environment): - make meira/promicro:default + make meira/featherble:default # for Feather BLE 32u4 controllers + make meira/promicro:default # for Pro Micro controllers -or +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). - make meira/featherble:default - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information on generic QMK configuration and setup. - -Both the Pro Micro and the Feather BLE use the Catalina bootloader, which is typically programmed using avrdude. +Both the Pro Micro and the Feather BLE use the Caterina bootloader, which is typically programmed using avrdude. ## Matrix @@ -28,4 +25,4 @@ In order to have enough pins for the matrix and other functions, a custom matrix ## LED Controller -The in-switch LEDs are driven by an ISSI LED controller (IS31FL3731). The micro controller communicates with this chip using I2C. Individual LED control is possible, but currently only general backlighting support is implemented. This functionality is located in lighting.c, issi.c, and TWILib.c. \ No newline at end of file +The in-switch LEDs are driven by an ISSI LED controller (IS31FL3731). The micro controller communicates with this chip using I2C. Individual LED control is possible, but currently only general backlighting support is implemented. This functionality is located in lighting.c, issi.c, and TWILib.c. diff --git a/keyboards/meira/rules.mk b/keyboards/meira/rules.mk index 0b8e55b57c..29fadda574 100644 --- a/keyboards/meira/rules.mk +++ b/keyboards/meira/rules.mk @@ -8,27 +8,26 @@ BOOTLOADER = caterina # change yes to no to disable # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = no # Mouse keys +MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -UNICODE_ENABLE = no # Unicode -AUDIO_ENABLE = no # Audio output -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality, also set ISSI_ENABLE below for Meira BACKLIGHT_DRIVER = custom -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality, also set ISSI_ENABLE below for Miera -ISSI_ENABLE = yes # If the I2C pullup resistors aren't install this must be disabled +ISSI_ENABLE = yes # If the I2C pullup resistors aren't install this must be disabled +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output CUSTOM_MATRIX = yes #ifeq ($(strip $(ISSI_ENABLE)), yes) # TMK_COMMON_DEFS += -DISSI_ENABLE #endif -# + #ifeq ($(strip $(WATCHDOG_ENABLE)), yes) # TMK_COMMON_DEFS += -DWATCHDOG_ENABLE #endif From 66857b919beccfc9d3395ffe1f88cb39e044aca3 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Thu, 23 Sep 2021 08:31:11 +0000 Subject: [PATCH 094/595] Wuque Mammoth20x Layout Macro Refactor (#14568) * mammoth20x: edit size of RightEncode key in Configurator * physically arrange layout macro Arranges the keycodes to resemble the assembled board. * rename LAYOUT_default to LAYOUT Includes "layout_aliases" tree in info.json for backwards compatibility. * rules.mk touch-up * convert tabs to spaces * add line break before ENCODER_ENABLE (not included in QMK's template) * readme.md touch-up * remove zero-width space characters * markdown fix for info paragraph * update link text --- keyboards/wuque/mammoth20x/info.json | 11 ++++--- .../wuque/mammoth20x/keymaps/default/keymap.c | 16 +++++----- .../wuque/mammoth20x/keymaps/via/keymap.c | 32 +++++++++---------- keyboards/wuque/mammoth20x/mammoth20x.h | 9 +++--- keyboards/wuque/mammoth20x/readme.md | 10 +++--- keyboards/wuque/mammoth20x/rules.mk | 2 +- 6 files changed, 41 insertions(+), 39 deletions(-) diff --git a/keyboards/wuque/mammoth20x/info.json b/keyboards/wuque/mammoth20x/info.json index 552a13b08b..4b53405c19 100644 --- a/keyboards/wuque/mammoth20x/info.json +++ b/keyboards/wuque/mammoth20x/info.json @@ -2,13 +2,18 @@ "keyboard_name": "mammoth20x", "url": "https://shop.wuquestudio.com/", "maintainer": "spbgzh", + "layout_aliases": { + "LAYOUT_default": "LAYOUT" + }, "layouts": { - "LAYOUT_default": { + "LAYOUT": { "layout": [ { "label": "Esc", "x": 0, "y": 0 }, { "label": "Pause", "x": 1, "y": 0 }, { "label": "Delete", "x": 2, "y": 0 }, - { "label": "E", "x": 3.5, "y": 0 }, + { "label": "LeftEncode", "x": 3, "y": 0, "w": 0.5 }, + { "label": "EncoderClick", "x": 3.5, "y": 0 }, + { "label": "RightEncode", "x": 4.5, "y": 0, "w" : 0.5 }, { "label": "Num", "x": 0, "y": 1 }, { "label": "/", "x": 1, "y": 1 }, @@ -18,7 +23,6 @@ { "label": "7", "x": 0, "y": 2 }, { "label": "8", "x": 1, "y": 2 }, { "label": "9", "x": 2, "y": 2 }, - { "label": "LeftEncode", "x": 3, "y": 0, "w": 0.5 }, { "label": "4", "x": 0, "y": 3 }, { "label": "5", "x": 1, "y": 3 }, @@ -28,7 +32,6 @@ { "label": "1", "x": 0, "y": 4 }, { "label": "2", "x": 1, "y": 4 }, { "label": "3", "x": 2, "y": 4 }, - { "label": "RightEncode", "x": 4.5, "y": 0, "w" : 0.25 }, { "label": "0", "x": 0, "y": 5, "w": 2 }, { "label": ".", "x": 2, "y": 5 }, diff --git a/keyboards/wuque/mammoth20x/keymaps/default/keymap.c b/keyboards/wuque/mammoth20x/keymaps/default/keymap.c index 77946f373d..e19b3bc172 100644 --- a/keyboards/wuque/mammoth20x/keymaps/default/keymap.c +++ b/keyboards/wuque/mammoth20x/keymaps/default/keymap.c @@ -17,20 +17,20 @@ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_default( - KC_ESC, KC_PAUS, KC_DEL, KC_MUTE, + [0] = LAYOUT( + KC_ESC, KC_PAUS, KC_DEL, KC_VOLU, KC_MUTE, KC_VOLD, KC_LNUM, KC_PSLS, KC_PAST, KC_PMNS, - KC_P7, KC_P8, KC_P9, KC_VOLU, + KC_P7, KC_P8, KC_P9, KC_P4, KC_P5, KC_P6, KC_PPLS, - KC_P1, KC_P2, KC_P3, KC_VOLD, + KC_P1, KC_P2, KC_P3, KC_P0, KC_PDOT, KC_PENT ), - [1] = LAYOUT_default( - _______, _______, _______, _______, - _______, _______, _______, _______, - _______, _______, _______, _______, + [1] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______ ), }; diff --git a/keyboards/wuque/mammoth20x/keymaps/via/keymap.c b/keyboards/wuque/mammoth20x/keymaps/via/keymap.c index c8c434a60b..c8f7c1bb85 100644 --- a/keyboards/wuque/mammoth20x/keymaps/via/keymap.c +++ b/keyboards/wuque/mammoth20x/keymaps/via/keymap.c @@ -17,36 +17,36 @@ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_default( - KC_ESC, KC_PAUS, KC_DEL, KC_MUTE, + [0] = LAYOUT( + KC_ESC, KC_PAUS, KC_DEL, KC_VOLU, KC_MUTE, KC_VOLD, KC_LNUM, KC_PSLS, KC_PAST, KC_PMNS, - KC_P7, KC_P8, KC_P9, KC_VOLU, + KC_P7, KC_P8, KC_P9, KC_P4, KC_P5, KC_P6, KC_PPLS, - KC_P1, KC_P2, KC_P3, KC_VOLD, + KC_P1, KC_P2, KC_P3, KC_P0, KC_PDOT, KC_PENT ), - [1] = LAYOUT_default( - _______, _______, _______, _______, - _______, _______, _______, _______, - _______, _______, _______, _______, + [1] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______ ), - [2] = LAYOUT_default( - _______, _______, _______, _______, - _______, _______, _______, _______, - _______, _______, _______, _______, + [2] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______ ), - [3] = LAYOUT_default( - _______, _______, _______, _______, - _______, _______, _______, _______, - _______, _______, _______, _______, + [3] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______ ), }; diff --git a/keyboards/wuque/mammoth20x/mammoth20x.h b/keyboards/wuque/mammoth20x/mammoth20x.h index cd0d8d4789..408788bf60 100644 --- a/keyboards/wuque/mammoth20x/mammoth20x.h +++ b/keyboards/wuque/mammoth20x/mammoth20x.h @@ -18,12 +18,12 @@ #include "quantum.h" -#define LAYOUT_default( \ - K00, K01, K02, K03, \ +#define LAYOUT( \ + K00, K01, K02, K23, K03, K43, \ K10, K11, K12, K13, \ - K20, K21, K22, K23, \ + K20, K21, K22, \ K30, K31, K32, K33, \ - K40, K41, K42, K43, \ + K40, K41, K42, \ K50, K52, K53 \ ) { \ { K00, K01, K02, K03 }, \ @@ -33,4 +33,3 @@ { K40, K41, K42, K43 }, \ { K50, KC_NO, K52, K53 }, \ } - diff --git a/keyboards/wuque/mammoth20x/readme.md b/keyboards/wuque/mammoth20x/readme.md index 4b731a159c..d98175e9bf 100644 --- a/keyboards/wuque/mammoth20x/readme.md +++ b/keyboards/wuque/mammoth20x/readme.md @@ -1,11 +1,11 @@ # mammoth20x -​ -More Info at[wuquestudio](https://shop.wuquestudio.com/). -​ + +More info at [Wuque Studio](https://shop.wuquestudio.com/). + * Keyboard Maintainer: [spbgzh](https://github.com/spbgzh) * Hardware Supported: mammoth20x Standard -* Hardware Availability: [mammoth20x](https://shop.wuquestudio.com/) -​ +* Hardware Availability: [Wuque Studio](https://shop.wuquestudio.com/) + Make example for this keyboard (after setting up your build environment): make wuque/mammoth20x:default diff --git a/keyboards/wuque/mammoth20x/rules.mk b/keyboards/wuque/mammoth20x/rules.mk index f400415b61..cba836c456 100644 --- a/keyboards/wuque/mammoth20x/rules.mk +++ b/keyboards/wuque/mammoth20x/rules.mk @@ -19,5 +19,5 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -ENCODER_ENABLE = yes # Enable Encoder +ENCODER_ENABLE = yes # Enable Encoder From 29f199f456e4ef364926d0d5babd96b708393955 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Thu, 23 Sep 2021 18:01:49 +0000 Subject: [PATCH 095/595] AMJ96 Refactor (#14571) * clean up amj96.h - use #pragma once include guard - remove extra comments - update matrix position alignment (easier readability) * info.json: apply human-friendly formatting * rename LAYOUT to LAYOUT_all * clean up rules.mk Align to QMK's AVR template. * clean up default keymap - use four-space indent - add RESET keycode (Fn+R) - remove unnecessary functions * clean up config.h - use #pragma once include guard - move lighting settings to the middle of the file (QMK template conformance) - remove Magic and MIDI configuration blocks * update readme.md file - update keyboard info list - add flashing instructions - update Docs links - remove trailing spaces * remove "empty" config.h and readme.md from default keymap --- keyboards/amj96/amj96.h | 26 ++--- keyboards/amj96/config.h | 93 ++++++---------- keyboards/amj96/info.json | 126 ++++++++++++++++++++-- keyboards/amj96/keymaps/default/config.h | 20 ---- keyboards/amj96/keymaps/default/keymap.c | 34 +++--- keyboards/amj96/keymaps/default/readme.md | 1 - keyboards/amj96/readme.md | 14 ++- keyboards/amj96/rules.mk | 4 +- 8 files changed, 191 insertions(+), 127 deletions(-) delete mode 100644 keyboards/amj96/keymaps/default/config.h delete mode 100644 keyboards/amj96/keymaps/default/readme.md diff --git a/keyboards/amj96/amj96.h b/keyboards/amj96/amj96.h index e8a83af0cb..9fcd07d5de 100644 --- a/keyboards/amj96/amj96.h +++ b/keyboards/amj96/amj96.h @@ -13,25 +13,20 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ -#ifndef AMJ96_H -#define AMJ96_H + +#pragma once #include "quantum.h" -// readability #define XXX KC_NO -// This a shortcut to help you visually see your layout. -// The following is an example using the Planck MIT layout -// The first section contains all of the arguments -// The second converts the arguments into a two-dimensional array -#define LAYOUT( \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K09, K0A, K0C, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K0B, K0F, K6F, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, K3F, K0D, K6D, \ - K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E, K4F, K6E, \ - K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K5A, K5B, K5C, K5D, K5E, K5F, K0E, K07, \ - K60, K61, K62, K63, K64, K65, K66, K68, K69, K6A, K6B, K6C \ +#define LAYOUT_all( \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K09, K0A, K0C, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K0B, K0F, K6F, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, K3F, K0D, K6D, \ + K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E, K4F, K6E, \ + K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K5A, K5B, K5C, K5D, K5E, K5F, K0E, K07, \ + K60, K61, K62, K63, K64, K65, K66, K68, K69, K6A, K6B, K6C \ ) { \ { XXX, XXX, XXX, XXX, XXX, XXX, XXX, K07, XXX, K09, K0A, K0B, K0C, K0D, K0E, K0F }, \ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F }, \ @@ -41,6 +36,3 @@ { K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K5A, K5B, K5C, K5D, K5E, K5F }, \ { K60, K61, K62, K63, K64, K65, K66, XXX, K68, K69, K6A, K6B, K6C, K6D, K6E, K6F } \ } - - -#endif diff --git a/keyboards/amj96/config.h b/keyboards/amj96/config.h index eaa33f6281..5de56683a6 100644 --- a/keyboards/amj96/config.h +++ b/keyboards/amj96/config.h @@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef CONFIG_H -#define CONFIG_H +#pragma once #include "config_common.h" @@ -40,20 +39,50 @@ along with this program. If not, see . * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) * -*/ + */ #define UNUSED_PINS /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW +//#define BACKLIGHT_PIN B7 +//#define BACKLIGHT_LEVELS 3 +//#define BACKLIGHT_BREATHING + +#define RGB_DI_PIN D3 +#ifdef RGB_DI_PIN +# define RGBLED_NUM 16 +//# define RGBLIGHT_HUE_STEP 8 +//# define RGBLIGHT_SAT_STEP 8 +//# define RGBLIGHT_VAL_STEP 8 +//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ +# define RGBLIGHT_ANIMATIONS +/*== or choose animations ==*/ +//# define RGBLIGHT_EFFECT_BREATHING +//# define RGBLIGHT_EFFECT_RAINBOW_MOOD +//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL +//# define RGBLIGHT_EFFECT_SNAKE +//# define RGBLIGHT_EFFECT_KNIGHT +//# define RGBLIGHT_EFFECT_CHRISTMAS +//# define RGBLIGHT_EFFECT_STATIC_GRADIENT +//# define RGBLIGHT_EFFECT_RGB_TEST +//# define RGBLIGHT_EFFECT_ALTERNATING +/*== customize breathing effect ==*/ +/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +/*==== use exp() and sin() ====*/ +//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +#endif + /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 /* define if matrix has ghost (lacks anti-ghosting diodes) */ //#define MATRIX_HAS_GHOST -/* number of backlight levels */ - /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ @@ -85,54 +114,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -150,9 +131,3 @@ along with this program. If not, see . //#define NO_ACTION_ONESHOT #define NO_ACTION_MACRO #define NO_ACTION_FUNCTION - -#define RGBLIGHT_ANIMATIONS -#define RGBLED_NUM 16 -#define RGB_DI_PIN D3 - -#endif diff --git a/keyboards/amj96/info.json b/keyboards/amj96/info.json index 18328b123c..b2aac215c0 100644 --- a/keyboards/amj96/info.json +++ b/keyboards/amj96/info.json @@ -1,10 +1,122 @@ { - "keyboard_name": "AMJ96", - "url": "", - "maintainer": "qmk", - "layouts": { - "LAYOUT": { - "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":1, "y":0}, {"label":"F2", "x":2, "y":0}, {"label":"F3", "x":3, "y":0}, {"label":"F4", "x":4, "y":0}, {"label":"F5", "x":5, "y":0}, {"label":"F6", "x":6, "y":0}, {"label":"F7", "x":7, "y":0}, {"label":"F8", "x":8, "y":0}, {"label":"F9", "x":9, "y":0}, {"label":"F10", "x":10, "y":0}, {"label":"F11", "x":11, "y":0}, {"label":"F12", "x":12, "y":0}, {"label":"Print Screen", "x":13, "y":0}, {"label":"Pause", "x":14, "y":0}, {"label":"Ins", "x":15, "y":0}, {"label":"Del", "x":16, "y":0}, {"label":"Page Up", "x":17, "y":0}, {"label":"Page Down", "x":18, "y":0}, {"label":"` ~", "x":0, "y":1}, {"label":"1 !", "x":1, "y":1}, {"label":"2 @", "x":2, "y":1}, {"label":"3 #", "x":3, "y":1}, {"label":"4 $", "x":4, "y":1}, {"label":"5 %", "x":5, "y":1}, {"label":"6 ^", "x":6, "y":1}, {"label":"7 &", "x":7, "y":1}, {"label":"8 *", "x":8, "y":1}, {"label":"9 (", "x":9, "y":1}, {"label":"0 )", "x":10, "y":1}, {"label":"- _", "x":11, "y":1}, {"label":"= +", "x":12, "y":1}, {"label":"Back Space", "x":13, "y":1}, {"label":"Back Space 2", "x":14, "y":1}, {"label":"Num Lock", "x":15, "y":1}, {"label":"/", "x":16, "y":1}, {"label":"*", "x":17, "y":1}, {"label":"-", "x":18, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"[ {", "x":11.5, "y":2}, {"label":"] }", "x":12.5, "y":2}, {"label":"\\ |", "x":13.5, "y":2, "w":1.5}, {"label":"7", "x":15, "y":2}, {"label":"8", "x":16, "y":2}, {"label":"9", "x":17, "y":2}, {"label":"+", "x":18, "y":2}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":"; :", "x":10.75, "y":3}, {"label":"' \"", "x":11.75, "y":3}, {"label":"Enter", "x":12.75, "y":3, "w":2.25}, {"label":"4", "x":15, "y":3}, {"label":"5", "x":16, "y":3}, {"label":"6", "x":17, "y":3}, {"label":"+", "x":18, "y":3}, {"label":"Shift", "x":0, "y":4, "w":1.25}, {"label":"ISO \\", "x":1.25, "y":4}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":", <", "x":9.25, "y":4}, {"label":". >", "x":10.25, "y":4}, {"label":"/ ?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":1.75}, {"label":"Up", "x":14, "y":4}, {"label":"1", "x":15, "y":4}, {"label":"2", "x":16, "y":4}, {"label":"3", "x":17, "y":4}, {"label":"Enter", "x":18, "y":4}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"GUI", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"label":"Space", "x":3.75, "y":5, "w":6.25}, {"label":"Alt", "x":10, "y":5, "w":1.5}, {"label":"Fn", "x":11.5, "y":5, "w":1.5}, {"label":"Left", "x":13, "y":5}, {"label":"Down", "x":14, "y":5}, {"label":"Right", "x":15, "y":5}, {"label":"0", "x":16, "y":5}, {"label":".", "x":17, "y":5}, {"label":"Enter", "x":18, "y":5}] + "keyboard_name": "AMJ96", + "url": "", + "maintainer": "qmk", + "layout_aliases": { + "LAYOUT": "LAYOUT_all" + }, + "layouts": { + "LAYOUT_all": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":1, "y":0}, + {"label":"F2", "x":2, "y":0}, + {"label":"F3", "x":3, "y":0}, + {"label":"F4", "x":4, "y":0}, + {"label":"F5", "x":5, "y":0}, + {"label":"F6", "x":6, "y":0}, + {"label":"F7", "x":7, "y":0}, + {"label":"F8", "x":8, "y":0}, + {"label":"F9", "x":9, "y":0}, + {"label":"F10", "x":10, "y":0}, + {"label":"F11", "x":11, "y":0}, + {"label":"F12", "x":12, "y":0}, + {"label":"Print Screen", "x":13, "y":0}, + {"label":"Pause", "x":14, "y":0}, + {"label":"Ins", "x":15, "y":0}, + {"label":"Del", "x":16, "y":0}, + {"label":"Page Up", "x":17, "y":0}, + {"label":"Page Down", "x":18, "y":0}, + + {"label":"` ~", "x":0, "y":1}, + {"label":"1 !", "x":1, "y":1}, + {"label":"2 @", "x":2, "y":1}, + {"label":"3 #", "x":3, "y":1}, + {"label":"4 $", "x":4, "y":1}, + {"label":"5 %", "x":5, "y":1}, + {"label":"6 ^", "x":6, "y":1}, + {"label":"7 &", "x":7, "y":1}, + {"label":"8 *", "x":8, "y":1}, + {"label":"9 (", "x":9, "y":1}, + {"label":"0 )", "x":10, "y":1}, + {"label":"- _", "x":11, "y":1}, + {"label":"= +", "x":12, "y":1}, + {"label":"Back Space", "x":13, "y":1}, + {"label":"Back Space 2", "x":14, "y":1}, + {"label":"Num Lock", "x":15, "y":1}, + {"label":"/", "x":16, "y":1}, + {"label":"*", "x":17, "y":1}, + {"label":"-", "x":18, "y":1}, + + {"label":"Tab", "x":0, "y":2, "w":1.5}, + {"label":"Q", "x":1.5, "y":2}, + {"label":"W", "x":2.5, "y":2}, + {"label":"E", "x":3.5, "y":2}, + {"label":"R", "x":4.5, "y":2}, + {"label":"T", "x":5.5, "y":2}, + {"label":"Y", "x":6.5, "y":2}, + {"label":"U", "x":7.5, "y":2}, + {"label":"I", "x":8.5, "y":2}, + {"label":"O", "x":9.5, "y":2}, + {"label":"P", "x":10.5, "y":2}, + {"label":"[ {", "x":11.5, "y":2}, + {"label":"] }", "x":12.5, "y":2}, + {"label":"\\ |", "x":13.5, "y":2, "w":1.5}, + {"label":"7", "x":15, "y":2}, + {"label":"8", "x":16, "y":2}, + {"label":"9", "x":17, "y":2}, + {"label":"+", "x":18, "y":2}, + + {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, + {"label":"A", "x":1.75, "y":3}, + {"label":"S", "x":2.75, "y":3}, + {"label":"D", "x":3.75, "y":3}, + {"label":"F", "x":4.75, "y":3}, + {"label":"G", "x":5.75, "y":3}, + {"label":"H", "x":6.75, "y":3}, + {"label":"J", "x":7.75, "y":3}, + {"label":"K", "x":8.75, "y":3}, + {"label":"L", "x":9.75, "y":3}, + {"label":"; :", "x":10.75, "y":3}, + {"label":"' \"", "x":11.75, "y":3}, + {"label":"Enter", "x":12.75, "y":3, "w":2.25}, + {"label":"4", "x":15, "y":3}, + {"label":"5", "x":16, "y":3}, + {"label":"6", "x":17, "y":3}, + {"label":"+", "x":18, "y":3}, + + {"label":"Shift", "x":0, "y":4, "w":1.25}, + {"label":"ISO \\", "x":1.25, "y":4}, + {"label":"Z", "x":2.25, "y":4}, + {"label":"X", "x":3.25, "y":4}, + {"label":"C", "x":4.25, "y":4}, + {"label":"V", "x":5.25, "y":4}, + {"label":"B", "x":6.25, "y":4}, + {"label":"N", "x":7.25, "y":4}, + {"label":"M", "x":8.25, "y":4}, + {"label":", <", "x":9.25, "y":4}, + {"label":". >", "x":10.25, "y":4}, + {"label":"/ ?", "x":11.25, "y":4}, + {"label":"Shift", "x":12.25, "y":4, "w":1.75}, + {"label":"Up", "x":14, "y":4}, + {"label":"1", "x":15, "y":4}, + {"label":"2", "x":16, "y":4}, + {"label":"3", "x":17, "y":4}, + {"label":"Enter", "x":18, "y":4}, + + {"label":"Ctrl", "x":0, "y":5, "w":1.25}, + {"label":"GUI", "x":1.25, "y":5, "w":1.25}, + {"label":"Alt", "x":2.5, "y":5, "w":1.25}, + {"label":"Space", "x":3.75, "y":5, "w":6.25}, + {"label":"Alt", "x":10, "y":5, "w":1.5}, + {"label":"Fn", "x":11.5, "y":5, "w":1.5}, + {"label":"Left", "x":13, "y":5}, + {"label":"Down", "x":14, "y":5}, + {"label":"Right", "x":15, "y":5}, + {"label":"0", "x":16, "y":5}, + {"label":".", "x":17, "y":5}, + {"label":"Enter", "x":18, "y":5} + ] + } } - } } diff --git a/keyboards/amj96/keymaps/default/config.h b/keyboards/amj96/keymaps/default/config.h deleted file mode 100644 index 0c01a85594..0000000000 --- a/keyboards/amj96/keymaps/default/config.h +++ /dev/null @@ -1,20 +0,0 @@ -/* Copyright 2017 MechMerlin - - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - - -// place overrides here diff --git a/keyboards/amj96/keymaps/default/keymap.c b/keyboards/amj96/keymaps/default/keymap.c index f670b3c4f4..baa4bef9dc 100644 --- a/keyboards/amj96/keymaps/default/keymap.c +++ b/keyboards/amj96/keymaps/default/keymap.c @@ -1,4 +1,5 @@ /* Copyright 2017 MechMerlin + * 2021 QMK/James Young (@noroadsleft) * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -17,21 +18,22 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_PAUS, KC_INS, KC_DEL, KC_PGUP, KC_PGDN, \ - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NO, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PPLS, \ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, \ - KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, \ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_FN0, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT \ - ), + [0] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_PAUS, KC_INS, KC_DEL, KC_PGUP, KC_PGDN, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, XXXXXXX, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT + ), + + [1] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) - [1] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, XXXXXXX, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ - ) }; diff --git a/keyboards/amj96/keymaps/default/readme.md b/keyboards/amj96/keymaps/default/readme.md deleted file mode 100644 index 478ab99669..0000000000 --- a/keyboards/amj96/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for amj96 diff --git a/keyboards/amj96/readme.md b/keyboards/amj96/readme.md index f131300479..8cd4ea94a1 100644 --- a/keyboards/amj96/readme.md +++ b/keyboards/amj96/readme.md @@ -2,15 +2,19 @@ The AMD96 is a 96 key custom keyboard with anodized aluminum case, twin usb ports, and support for backlight LEDs and RGB underglow via SMD LEDs. -Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) -Hardware Supported: AMJ96 -Hardware Availability: Was previously available on a GB via [Flashquark](https://flashquark.com/product/amj96/) +* Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) +* Hardware Supported: AMJ96 +* Hardware Availability: [~~Flashquark~~](https://flashquark.com/product/amj96/) (no longer available) Make example for this keyboard (after setting up your build environment): make amj96:default -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. +Flashing example for this keyboard: + + make amj96:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). ## Notes -- In-switch and underglow LEDs currently not supported. +- In-switch and underglow LEDs currently not supported. diff --git a/keyboards/amj96/rules.mk b/keyboards/amj96/rules.mk index c19a156ff9..f780706a0e 100644 --- a/keyboards/amj96/rules.mk +++ b/keyboards/amj96/rules.mk @@ -17,8 +17,8 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -RGBLIGHT_ENABLE = yes -UNICODE_ENABLE = no # Unicode +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output + CUSTOM_MATRIX = yes SRC += matrix.c From a68c4d8b8150d936b700a4d1f2f9670f97b78b87 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Thu, 23 Sep 2021 12:08:23 -0700 Subject: [PATCH 096/595] [Keyboard] Update default keymaps for OLKB boards (#14565) --- keyboards/planck/keymaps/default/config.h | 27 ++++++++++++++++------ keyboards/planck/keymaps/default/keymap.c | 2 +- keyboards/preonic/keymaps/default/config.h | 26 ++++++++++++++++----- keyboards/preonic/keymaps/default/keymap.c | 2 +- 4 files changed, 42 insertions(+), 15 deletions(-) diff --git a/keyboards/planck/keymaps/default/config.h b/keyboards/planck/keymaps/default/config.h index 9020d2b9f8..464b7b29f8 100644 --- a/keyboards/planck/keymaps/default/config.h +++ b/keyboards/planck/keymaps/default/config.h @@ -1,13 +1,27 @@ +/* Copyright 2015-2021 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + #pragma once #ifdef AUDIO_ENABLE - #define STARTUP_SONG SONG(PLANCK_SOUND) - // #define STARTUP_SONG SONG(NO_SOUND) +# define STARTUP_SONG SONG(PLANCK_SOUND) +// #define STARTUP_SONG SONG(NO_SOUND) - #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \ - SONG(COLEMAK_SOUND), \ - SONG(DVORAK_SOUND) \ - } +# define DEFAULT_LAYER_SONGS \ + { SONG(QWERTY_SOUND), SONG(COLEMAK_SOUND), SONG(DVORAK_SOUND) } #endif /* @@ -33,4 +47,3 @@ // Most tactile encoders have detents every 4 stages #define ENCODER_RESOLUTION 4 - diff --git a/keyboards/planck/keymaps/default/keymap.c b/keyboards/planck/keymaps/default/keymap.c index 9a6e1189b6..7c787e0366 100644 --- a/keyboards/planck/keymaps/default/keymap.c +++ b/keyboards/planck/keymaps/default/keymap.c @@ -1,4 +1,4 @@ -/* Copyright 2015-2017 Jack Humbert +/* Copyright 2015-2021 Jack Humbert * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/keyboards/preonic/keymaps/default/config.h b/keyboards/preonic/keymaps/default/config.h index 37858350a8..8756e5012c 100644 --- a/keyboards/preonic/keymaps/default/config.h +++ b/keyboards/preonic/keymaps/default/config.h @@ -1,13 +1,27 @@ +/* Copyright 2015-2021 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + #pragma once #ifdef AUDIO_ENABLE - #define STARTUP_SONG SONG(PREONIC_SOUND) - // #define STARTUP_SONG SONG(NO_SOUND) +# define STARTUP_SONG SONG(PREONIC_SOUND) +// #define STARTUP_SONG SONG(NO_SOUND) - #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \ - SONG(COLEMAK_SOUND), \ - SONG(DVORAK_SOUND) \ - } +# define DEFAULT_LAYER_SONGS \ + { SONG(QWERTY_SOUND), SONG(COLEMAK_SOUND), SONG(DVORAK_SOUND) } #endif #define MUSIC_MASK (keycode != KC_NO) diff --git a/keyboards/preonic/keymaps/default/keymap.c b/keyboards/preonic/keymaps/default/keymap.c index 3a82f7151b..f99a6953c6 100644 --- a/keyboards/preonic/keymaps/default/keymap.c +++ b/keyboards/preonic/keymaps/default/keymap.c @@ -1,4 +1,4 @@ -/* Copyright 2015-2017 Jack Humbert +/* Copyright 2015-2021 Jack Humbert * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by From f4e42bde4a9c8671b1263c356615a1762a2790ab Mon Sep 17 00:00:00 2001 From: Sets3n <76554585+Sets3n@users.noreply.github.com> Date: Fri, 24 Sep 2021 03:16:20 +0800 Subject: [PATCH 097/595] kk980 - Fix Configurator rendering (#14556) * add kk980 * fix * fix config.h * Modified readme.md * fix * Modified format. * Modified image. * Modified rules.mk * Modified rules.mk + # * fix info.json: keys dislocation --- keyboards/sets3n/kk980/info.json | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/keyboards/sets3n/kk980/info.json b/keyboards/sets3n/kk980/info.json index e6622d14bf..5c1cabafe2 100644 --- a/keyboards/sets3n/kk980/info.json +++ b/keyboards/sets3n/kk980/info.json @@ -73,10 +73,10 @@ {"label":";:", "x": 10.75, "y": 3.5}, {"label":"'\"", "x": 11.75, "y": 3.5}, {"label":"RETURN", "x": 12.75, "y": 3.5, "w": 2.25}, - {"label":"4", "x": 15.5, "y": 3.5, "w": 1.5}, + {"label":"4", "x": 15.5, "y": 3.5}, {"label":"5", "x": 16.5, "y": 3.5}, {"label":"6", "x": 17.5, "y": 3.5}, - {"label":"+", "x": 18.5, "y": 3.5, "h": 2}, + {"label":"+", "x": 18.5, "y": 2.5, "h": 2}, {"label":"LSHIFT", "x": 0, "y": 4.5, "w": 2.25}, {"label":"Z", "x": 2.25, "y": 4.5}, @@ -98,16 +98,16 @@ {"label":"LCTRL", "x": 0, "y": 5.5, "w": 1.25}, {"label":"LWIN", "x": 1.25, "y": 5.5}, {"label":"LALT", "x": 2.25, "y": 5.5, "w": 1.25}, - {"label":"SPACE", "x": 3.25, "y": 5.5, "w": 6.25}, - {"label":"RALT", "x": 9.5, "y": 5.5}, - {"label":"FN", "x": 10.5, "y": 5.5}, - {"label":"RCTRL", "x": 11.5, "y": 5.5, "w": 1.25}, - {"label":"LEFT", "x": 13, "y": 5.75}, - {"label":"DOWN", "x": 14, "y": 5.75}, - {"label":"RIGHT", "x": 15, "y": 5.75}, + {"label":"SPACE", "x": 3.5, "y": 5.5, "w": 6.25}, + {"label":"RALT", "x": 9.75, "y": 5.5}, + {"label":"FN", "x": 10.75, "y": 5.5}, + {"label":"RCTRL", "x": 11.75, "y": 5.5, "w": 1.25}, + {"label":"LEFT", "x": 13.25, "y": 5.75}, + {"label":"DOWN", "x": 14.25, "y": 5.75}, + {"label":"RIGHT", "x": 15.25, "y": 5.75}, {"label":"0", "x": 16.5, "y": 5.5}, - {"label":".DEL", "x": 17.5, "y": 5.5, "w": 2.75}, - {"label":"ENTER", "x": 18.5, "y": 5.5, "h": 2} + {"label":".DEL", "x": 17.5, "y": 5.5,}, + {"label":"ENTER", "x": 18.5, "y": 4.5, "h": 2} ] } From 30140f48d0968460fff7ef15994b616ee10e3d3f Mon Sep 17 00:00:00 2001 From: umi <57262844+umi-umi@users.noreply.github.com> Date: Fri, 24 Sep 2021 14:51:34 +0900 Subject: [PATCH 098/595] [Docs] update Japanese translation of pr_checklist.md (#13693) * update pr_checklist.md translation * update file based on comments * add id on feature_led_indicators.md and update text based on comments * update file based on comments * update file based on comment --- docs/ja/feature_led_indicators.md | 2 +- docs/ja/pr_checklist.md | 17 ++++++++++++++--- 2 files changed, 15 insertions(+), 4 deletions(-) diff --git a/docs/ja/feature_led_indicators.md b/docs/ja/feature_led_indicators.md index 307603f0a4..764b478c31 100644 --- a/docs/ja/feature_led_indicators.md +++ b/docs/ja/feature_led_indicators.md @@ -25,7 +25,7 @@ LED の状態を `uint8_t` として提供する2つの非推奨の関数があ * `uint8_t led_set_kb(uint8_t usb_led)` と `_user(uint8_t usb_led)` * `uint8_t host_keyboard_leds()` -## 設定オプション +## 設定オプション :id=configuration-options インジケータを設定するには、`config.h` で以下の `#define` をします: diff --git a/docs/ja/pr_checklist.md b/docs/ja/pr_checklist.md index 9026ac4866..18dbeccebb 100644 --- a/docs/ja/pr_checklist.md +++ b/docs/ja/pr_checklist.md @@ -1,8 +1,8 @@ # PR チェックリスト これは、提出された PR を QMK の協力者がレビューする際に何をチェックするのかの非網羅的なチェックリストです。 @@ -73,11 +73,13 @@ https://github.com/qmk/qmk_firmware/pulls?q=is%3Apr+is%3Aclosed+label%3Akeyboard - キーボードが QMK で起動するために最低限必要なコードが存在する必要があります - マトリックスと重要なデバイスの初期化コード - (カスタムキーコードや特別なアニメーションなど)商用キーボードの既存の機能をミラーリングする場合は、`default` ではないキーマップを使って処理する必要があります + - Vial 関連のファイルまたは変更は QMK ファームウェアで使用されないため受け入れられません (Vial 固有のコアコードは提出またはマージされていません) - `keyboard.c` - 空の `xxxx_xxxx_kb()` または他の weak-define のデフォルト実装関数が削除されていること - コメントアウトされた関数も削除されていること - `matrix_init_board()` などが `keyboard_pre_init_kb()` に移行されました。[keyboard_pre_init*](https://docs.qmk.fm/#/ja/custom_quantum_functions?id=keyboard_pre_init_-function-documentation) を参照してください - カスタムマトリックスを使用する場合は、`CUSTOM_MATRIX = lite` を選択し、標準のデバウンスを許可します。[マトリックスコードの部分置き換え](https://docs.qmk.fm/#/ja/custom_matrix?id=lite) を参照してください + - 可能な場合は、独自の `led_update_*()` 実装よりも LED インジケータの[設定オプション](https://docs.qmk.fm/#/ja/feature_led_indicators?id=configuration-options)を優先してください。 - `keyboard.h` - 先頭に `#include "quantum.h"` を置きます - `LAYOUT` マクロは、該当する場合は標準の定義を使用してください @@ -95,9 +97,12 @@ https://github.com/qmk/qmk_firmware/pulls?q=is%3Apr+is%3Aclosed+label%3Akeyboard ...キーマップの `process_record_user()` 内で `layer_on()`、 `update_tri_layer()` を手動で処理する代わりに。 - default (および via) のキーマップは「素朴」でなければなりません。 - 他のユーザーが独自のユーザー固有のキーマップを開発するための「クリーンな状態」として使用するための最低限のもの。 - - これらのキーマップで推奨される標準レイアウト（可能な場合） + - これらのキーマップでは標準のレイアウトが推奨されます（可能な場合） + - デフォルトのキーマップは VIA を有効にするべきではありません -- VIA の統合ドキュメント類には `via` という名前のキーマップが必要です。 - PR の提出者は、同じ PR に機能を紹介する個人的な（または豪華な）キーマップを持たせることができますが、「デフォルト」のキーマップに埋め込むべきではありません - PR の提出者はまた、既存の商用キーボードへ QMK を移植する場合、その商用製品の既存の機能を反映する「製造業者に一致する」キーマップを持つことができます +- PR に VIA の json ファイルを含めないでください。これらは QMK ファームウェアで使われないため QMK リポジトリに属しません -- それらは [VIA のキーボードリポジトリ](https://github.com/the-via/keyboards)に属します。 + さらに、ChibiOS に固有で: - 既存の ChibiOS ボード定義を使用することを**強く**推奨します。 @@ -132,3 +137,9 @@ There are instructions on how to keep your fork updated here: Thanks for contributing! ``` + +## レビュープロセス + +一般的に、PR がマージの対象となる前に、意味のある(例えば、コードを検査した)2つ(またはそれ以上)の承認を確認したいと考えています。これらのレビューはコラボレータに限られません -- 時間を割いてくれるコミュニティメンバーは誰でも歓迎(奨励)されます。唯一の違いは、チェックマークが緑にならないことですが、それは問題ありません。 + +また、PR レビューは自由な時間に行われるものです。それは好意で行われるものなので、私たちはレビューに費やす時間に対して、報酬はうけとっていませんし埋め合わせもありません。そのため、私たちがあなたのプルリクエストに取り掛かるのには時間がかかります。家族や生活のことで PR に手が回らなくなることもあり、そして燃え尽き症候群は深刻な懸念です。QMK ファームウェアリポジトリは、毎月平均200件の PR が開かれ、200件の PR がマージされますので、しばらくお待ちください。 From e36c2cbf900c1232750e742ebf9ce365c747fc16 Mon Sep 17 00:00:00 2001 From: Albert Y <76888457+filterpaper@users.noreply.github.com> Date: Fri, 24 Sep 2021 14:32:40 +0800 Subject: [PATCH 099/595] [Keyboard] Disable console on Sofle for size concerns (#14577) Co-authored-by: filterpaper --- keyboards/sofle/keymaps/rgb_default/rules.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/keyboards/sofle/keymaps/rgb_default/rules.mk b/keyboards/sofle/keymaps/rgb_default/rules.mk index 92a293196f..860c2122da 100644 --- a/keyboards/sofle/keymaps/rgb_default/rules.mk +++ b/keyboards/sofle/keymaps/rgb_default/rules.mk @@ -1,6 +1,6 @@ MOUSEKEY_ENABLE = yes EXTRAKEY_ENABLE = yes -CONSOLE_ENABLE = yes +CONSOLE_ENABLE = no RGBLIGHT_ENABLE = yes ENCODER_ENABLE = yes LTO_ENABLE = yes From c242693ec7c1f99b51026fc6870de6d949054713 Mon Sep 17 00:00:00 2001 From: ryanbughuang Date: Fri, 24 Sep 2021 14:41:05 +0800 Subject: [PATCH 100/595] [Keyboard] Add sam/sg81m layout (#13432) Co-authored-by: Joel Challis --- keyboards/sam/sg81m/info.json | 90 ++++++++++++++++++++++++++++++++++- keyboards/sam/sg81m/sg81m.h | 19 +++++++- 2 files changed, 107 insertions(+), 2 deletions(-) diff --git a/keyboards/sam/sg81m/info.json b/keyboards/sam/sg81m/info.json index ae91bd6679..439d8562e9 100644 --- a/keyboards/sam/sg81m/info.json +++ b/keyboards/sam/sg81m/info.json @@ -3,7 +3,7 @@ "url": "", "maintainer": "CMMS-Freather", "layouts": { - "LAYOUT": { + "LAYOUT_7u_space": { "layout": [ {"label":"K00 (F0,B7)", "x":0, "y":0}, {"label":"K01 (F0,B6)", "x":1, "y":0}, @@ -87,6 +87,94 @@ {"label":"K59 (F7,D3)", "x":16.5, "y":4.25}, {"label":"K5A (F7,D4)", "x":17.5, "y":4.25} ] + + }, + "LAYOUT_6_25u_space": { + "layout": [ + {"label":"K00 (F0,B7)", "x":0, "y":0}, + {"label":"K01 (F0,B6)", "x":1, "y":0}, + {"label":"K02 (F0,B5)", "x":2, "y":0}, + {"label":"K03 (F0,B4)", "x":3, "y":0}, + {"label":"K04 (F0,C7)", "x":4, "y":0}, + {"label":"K05 (F0,C6)", "x":5, "y":0}, + {"label":"K06 (F0,D0)", "x":6, "y":0}, + {"label":"K07 (F0,D1)", "x":7, "y":0}, + {"label":"K08 (F0,D2)", "x":8, "y":0}, + {"label":"K09 (F0,D3)", "x":9, "y":0}, + {"label":"K0A (F0,D4)", "x":10, "y":0}, + {"label":"K0B (F0,D5)", "x":11, "y":0}, + {"label":"K0C (F0,D6)", "x":12, "y":0}, + {"label":"K0D (F0,D7)", "x":13, "y":0, "w":2}, + {"label":"K2D (F4,D7)", "x":15.5, "y":0}, + {"label":"K3D (F5,D7)", "x":16.5, "y":0}, + {"label":"K4D (F6,D7)", "x":17.5, "y":0}, + + {"label":"K10 (F1,B7)", "x":0, "y":1.25, "w":1.5}, + {"label":"K11 (F1,B6)", "x":1.5, "y":1.25}, + {"label":"K12 (F1,B5)", "x":2.5, "y":1.25}, + {"label":"K13 (F1,B4)", "x":3.5, "y":1.25}, + {"label":"K14 (F1,C7)", "x":4.5, "y":1.25}, + {"label":"K15 (F1,C6)", "x":5.5, "y":1.25}, + {"label":"K16 (F1,D0)", "x":6.5, "y":1.25}, + {"label":"K17 (F1,D1)", "x":7.5, "y":1.25}, + {"label":"K18 (F1,D2)", "x":8.5, "y":1.25}, + {"label":"K19 (F1,D3)", "x":9.5, "y":1.25}, + {"label":"K1A (F1,D4)", "x":10.5, "y":1.25}, + {"label":"K1B (F1,D5)", "x":11.5, "y":1.25}, + {"label":"K1C (F1,D6)", "x":12.5, "y":1.25}, + {"label":"K1D (F1,D7)", "x":13.5, "y":1.25, "w":1.5}, + {"label":"K56 (F7,D0)", "x":15.5, "y":1.25}, + {"label":"K57 (F7,D1)", "x":16.5, "y":1.25}, + {"label":"K58 (F7,D2)", "x":17.5, "y":1.25}, + + {"label":"K20 (F4,B7)", "x":0, "y":2.25, "w":1.75}, + {"label":"K21 (F4,B6)", "x":1.75, "y":2.25}, + {"label":"K22 (F4,B5)", "x":2.75, "y":2.25}, + {"label":"K23 (F4,B4)", "x":3.75, "y":2.25}, + {"label":"K24 (F4,C7)", "x":4.75, "y":2.25}, + {"label":"K25 (F4,C6)", "x":5.75, "y":2.25}, + {"label":"K26 (F4,D0)", "x":6.75, "y":2.25}, + {"label":"K27 (F4,D1)", "x":7.75, "y":2.25}, + {"label":"K28 (F4,D2)", "x":8.75, "y":2.25}, + {"label":"K29 (F4,D3)", "x":9.75, "y":2.25}, + {"label":"K2A (F4,D4)", "x":10.75, "y":2.25}, + {"label":"K2B (F4,D5)", "x":11.75, "y":2.25}, + {"label":"K2C (F4,D6)", "x":12.75, "y":2.25, "w":2.25}, + {"label":"K53 (F7,B4)", "x":15.5, "y":2.25}, + {"label":"K54 (F7,C7)", "x":16.5, "y":2.25}, + {"label":"K55 (F7,C6)", "x":17.5, "y":2.25}, + + {"label":"K30 (F5,B7)", "x":0, "y":3.25, "w":2.25}, + {"label":"K31 (F5,B6)", "x":2.25, "y":3.25}, + {"label":"K32 (F5,B5)", "x":3.25, "y":3.25}, + {"label":"K33 (F5,B4)", "x":4.25, "y":3.25}, + {"label":"K34 (F5,C7)", "x":5.25, "y":3.25}, + {"label":"K35 (F5,C6)", "x":6.25, "y":3.25}, + {"label":"K36 (F5,D0)", "x":7.25, "y":3.25}, + {"label":"K37 (F5,D1)", "x":8.25, "y":3.25}, + {"label":"K38 (F5,D2)", "x":9.25, "y":3.25}, + {"label":"K39 (F5,D3)", "x":10.25, "y":3.25}, + {"label":"K3A (F5,D4)", "x":11.25, "y":3.25}, + {"label":"K3B (F5,D5)", "x":12.25, "y":3.25, "w":1.75}, + {"label":"K3C (F5,D6)", "x":14.25, "y":3.5}, + {"label":"K50 (F7,B7)", "x":15.5, "y":3.25}, + {"label":"K51 (F7,B6)", "x":16.5, "y":3.25}, + {"label":"K52 (F7,B5)", "x":17.5, "y":3.25}, + + {"label":"K40 (F6,B7)", "x":0, "y":4.25, "w":1.25}, + {"label":"K41 (F6,B6)", "x":1.25, "y":4.25, "w":1.25}, + {"label":"K42 (F6,B5)", "x":2.5, "y":4.25, "w":1.25}, + {"label":"K45 (F6,C6)", "x":3.75, "y":4.25, "w":6.25}, + {"label":"K47 (F6,D1)", "x":10, "y":4.25}, + {"label":"K48 (F6,D2)", "x":11, "y":4.25}, + {"label":"K49 (F6,D3)", "x":12, "y":4.25}, + {"label":"K4A (F6,D4)", "x":13.25, "y":4.5}, + {"label":"K4B (F6,D5)", "x":14.25, "y":4.5}, + {"label":"K4C (F6,D6)", "x":15.25, "y":4.5}, + {"label":"K59 (F7,D3)", "x":16.5, "y":4.25}, + {"label":"K5A (F7,D4)", "x":17.5, "y":4.25} + ] + } } } diff --git a/keyboards/sam/sg81m/sg81m.h b/keyboards/sam/sg81m/sg81m.h index 73e69e439c..13a5d760e2 100644 --- a/keyboards/sam/sg81m/sg81m.h +++ b/keyboards/sam/sg81m/sg81m.h @@ -18,7 +18,7 @@ #include "quantum.h" -#define LAYOUT( \ +#define LAYOUT_7u_space( \ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D, K3D, K4D, \ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K56, K57, K58, \ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K53, K54, K55, \ @@ -33,5 +33,22 @@ { K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K5A, KC_NO, KC_NO, KC_NO }, \ } +#define LAYOUT_6_25u_space( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D, K3D, K4D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K56, K57, K58, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K53, K54, K55, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K50, K51, K52, \ + K40, K41, K42, K45, K47, K48, K49, K4A, K4B, K4C, K59, K5A \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \ + { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, K47, K48, K49, K4A, K4B, K4C, K4D }, \ + { K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K5A, KC_NO, KC_NO, KC_NO }, \ +} + +#define LAYOUT LAYOUT_7u_space + // generated by KBFirmware JSON to QMK Parser // https://noroadsleft.github.io/kbf_qmk_converter/ From fcb7c7b04fc822e04ac0d2ba9ba8d2483d838b80 Mon Sep 17 00:00:00 2001 From: mechlovin <57231893+mechlovin@users.noreply.github.com> Date: Fri, 24 Sep 2021 00:13:23 -0700 Subject: [PATCH 101/595] [Keyboard] Add Adelais PCB. Adelais RGB rev.3, Adelais rev. 4 APM32F103, Adelais AVR rev. 1 (#14252) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- keyboards/mechlovin/adelais/adelais.h | 44 +-- keyboards/mechlovin/adelais/config.h | 9 +- keyboards/mechlovin/adelais/rgb_led/config.h | 21 + keyboards/mechlovin/adelais/rgb_led/readme.md | 16 - .../mechlovin/adelais/rgb_led/rev1/config.h | 7 +- .../mechlovin/adelais/rgb_led/rev1/rev1.h | 30 ++ .../mechlovin/adelais/rgb_led/rev2/config.h | 7 +- .../mechlovin/adelais/rgb_led/rev2/rev2.h | 30 ++ .../mechlovin/adelais/rgb_led/rev3/config.h | 77 ++++ .../{standard_led => rgb_led/rev3}/halconf.h | 1 - .../{standard_led => rgb_led/rev3}/mcuconf.h | 1 - .../mechlovin/adelais/rgb_led/rev3/rev3.c | 166 ++++++++ .../mechlovin/adelais/rgb_led/rev3/rev3.h | 52 +++ .../mechlovin/adelais/rgb_led/rev3/rules.mk | 5 + keyboards/mechlovin/adelais/rules.mk | 4 +- .../adelais/standard_led/{ => arm}/.noci | 0 .../adelais/standard_led/arm/chconf.h | 24 ++ .../adelais/standard_led/{ => arm}/config.h | 8 + .../adelais/standard_led/arm/halconf.h | 24 ++ .../adelais/standard_led/arm/mcuconf.h | 29 ++ .../adelais/standard_led/{ => arm}/readme.md | 2 +- .../adelais/standard_led/{ => arm}/rev2/.noci | 0 .../standard_led/{ => arm}/rev2/config.h | 0 .../adelais/standard_led/arm/rev2/rev2.h | 49 +++ .../standard_led/{ => arm}/rev2/rules.mk | 0 .../standard_led/{ => arm}/rev3/config.h | 0 .../adelais/standard_led/arm/rev3/rev3.h | 49 +++ .../standard_led/{ => arm}/rev3/rules.mk | 0 .../standard_led/arm/rev4/apm32f103/rules.mk | 5 + .../standard_led/{ => arm}/rev4/config.h | 0 .../adelais/standard_led/arm/rev4/readme.md | 16 + .../adelais/standard_led/arm/rev4/rev4.h | 49 +++ .../standard_led/{ => arm}/rev4/rules.mk | 0 .../standard_led/arm/rev4/stm32f303/rules.mk | 6 + .../adelais/standard_led/arm/rules.mk | 2 + .../mechlovin/adelais/standard_led/avr/.noci | 0 .../standard_led/{rev4 => avr}/readme.md | 6 +- .../adelais/standard_led/avr/rev1/config.h | 67 ++++ .../adelais/standard_led/avr/rev1/matrix.c | 363 ++++++++++++++++++ .../adelais/standard_led/avr/rev1/readme.md | 16 + .../adelais/standard_led/avr/rev1/rev1.h | 48 +++ .../adelais/standard_led/avr/rev1/rules.mk | 13 + .../adelais/standard_led/avr/rules.mk | 2 + .../mechlovin/adelais/standard_led/rules.mk | 8 +- 44 files changed, 1190 insertions(+), 66 deletions(-) create mode 100644 keyboards/mechlovin/adelais/rgb_led/config.h delete mode 100644 keyboards/mechlovin/adelais/rgb_led/readme.md create mode 100644 keyboards/mechlovin/adelais/rgb_led/rev3/config.h rename keyboards/mechlovin/adelais/{standard_led => rgb_led/rev3}/halconf.h (99%) rename keyboards/mechlovin/adelais/{standard_led => rgb_led/rev3}/mcuconf.h (99%) create mode 100644 keyboards/mechlovin/adelais/rgb_led/rev3/rev3.c create mode 100644 keyboards/mechlovin/adelais/rgb_led/rev3/rev3.h create mode 100644 keyboards/mechlovin/adelais/rgb_led/rev3/rules.mk rename keyboards/mechlovin/adelais/standard_led/{ => arm}/.noci (100%) create mode 100644 keyboards/mechlovin/adelais/standard_led/arm/chconf.h rename keyboards/mechlovin/adelais/standard_led/{ => arm}/config.h (88%) create mode 100644 keyboards/mechlovin/adelais/standard_led/arm/halconf.h create mode 100644 keyboards/mechlovin/adelais/standard_led/arm/mcuconf.h rename keyboards/mechlovin/adelais/standard_led/{ => arm}/readme.md (94%) rename keyboards/mechlovin/adelais/standard_led/{ => arm}/rev2/.noci (100%) rename keyboards/mechlovin/adelais/standard_led/{ => arm}/rev2/config.h (100%) create mode 100644 keyboards/mechlovin/adelais/standard_led/arm/rev2/rev2.h rename keyboards/mechlovin/adelais/standard_led/{ => arm}/rev2/rules.mk (100%) rename keyboards/mechlovin/adelais/standard_led/{ => arm}/rev3/config.h (100%) create mode 100644 keyboards/mechlovin/adelais/standard_led/arm/rev3/rev3.h rename keyboards/mechlovin/adelais/standard_led/{ => arm}/rev3/rules.mk (100%) create mode 100644 keyboards/mechlovin/adelais/standard_led/arm/rev4/apm32f103/rules.mk rename keyboards/mechlovin/adelais/standard_led/{ => arm}/rev4/config.h (100%) create mode 100644 keyboards/mechlovin/adelais/standard_led/arm/rev4/readme.md create mode 100644 keyboards/mechlovin/adelais/standard_led/arm/rev4/rev4.h rename keyboards/mechlovin/adelais/standard_led/{ => arm}/rev4/rules.mk (100%) create mode 100644 keyboards/mechlovin/adelais/standard_led/arm/rev4/stm32f303/rules.mk create mode 100644 keyboards/mechlovin/adelais/standard_led/arm/rules.mk create mode 100644 keyboards/mechlovin/adelais/standard_led/avr/.noci rename keyboards/mechlovin/adelais/standard_led/{rev4 => avr}/readme.md (85%) create mode 100644 keyboards/mechlovin/adelais/standard_led/avr/rev1/config.h create mode 100644 keyboards/mechlovin/adelais/standard_led/avr/rev1/matrix.c create mode 100644 keyboards/mechlovin/adelais/standard_led/avr/rev1/readme.md create mode 100644 keyboards/mechlovin/adelais/standard_led/avr/rev1/rev1.h create mode 100644 keyboards/mechlovin/adelais/standard_led/avr/rev1/rules.mk create mode 100644 keyboards/mechlovin/adelais/standard_led/avr/rules.mk diff --git a/keyboards/mechlovin/adelais/adelais.h b/keyboards/mechlovin/adelais/adelais.h index 5a5673abc7..12af379c88 100644 --- a/keyboards/mechlovin/adelais/adelais.h +++ b/keyboards/mechlovin/adelais/adelais.h @@ -18,32 +18,18 @@ #include "quantum.h" -#define LAYOUT_alice_split_bs( \ - K1E, K00, K01, K02, K03, K04, K05, K06, K07,K08,K09, K0A, K0B, K0C, K0D, K0E,\ - K2E, K10, K11, K12, K13, K14, K15, K16,K17,K18, K19, K1A, K1B, K1C, K1D,\ - K3E, K20, K21, K22, K23, K24, K25, K26,K27,K28, K29, K2A, K2B, K2D,\ - K30, K32, K33, K34, K35, K36, K37,K38,K39, K3A, K3B, K3D, K3C, K4D,\ - K40, K42, K44, K46, K48, K4A, K4E \ -) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, K2E }, \ - { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ - { K40, KC_NO, K42, KC_NO, K44, KC_NO, K46, KC_NO, K48, KC_NO, K4A, KC_NO, KC_NO, K4D, K4E }, \ -} - -#define LAYOUT_alice( \ - K1E, K00, K01, K02, K03, K04, K05, K06, K07,K08,K09, K0A, K0B, K0C, K0D, \ - K2E, K10, K11, K12, K13, K14, K15, K16,K17,K18, K19, K1A, K1B, K1C, K1D,\ - K3E, K20, K21, K22, K23, K24, K25, K26,K27,K28, K29, K2A, K2B, K2D,\ - K30, K32, K33, K34, K35, K36, K37,K38,K39, K3A, K3B, K3D, K3C, K4D,\ - K40, K42, K44, K46, K48, K4A, K4E \ -) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, KC_NO }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, K2E }, \ - { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ - { K40, KC_NO, K42, KC_NO, K44, KC_NO, K46, KC_NO, K48, KC_NO, K4A, KC_NO, KC_NO, K4D, K4E }, \ -} - -#define LAYOUT_all LAYOUT_alice_split_bs +#ifdef KEYBOARD_mechlovin_adelais_rgb_led_rev1 + #include "rev1.h" +#elif KEYBOARD_mechlovin_adelais_rgb_led_rev2 + #include "rev2.h" +#elif KEYBOARD_mechlovin_adelais_rgb_led_rev3 + #include "rev3.h" +#elif KEYBOARD_mechlovin_adelais_standard_led_arm_rev2 + #include "rev2.h" +#elif KEYBOARD_mechlovin_adelais_standard_led__armrev3 + #include "rev3.h" +#elif KEYBOARD_mechlovin_adelais_standard_led_arm_rev4 + #include "rev4.h" +#elif KEYBOARD_mechlovin_adelais_standard_led_avr_rev1 + #include "rev1.h" +#endif diff --git a/keyboards/mechlovin/adelais/config.h b/keyboards/mechlovin/adelais/config.h index 3ec5c49132..035ffa8032 100644 --- a/keyboards/mechlovin/adelais/config.h +++ b/keyboards/mechlovin/adelais/config.h @@ -26,11 +26,4 @@ along with this program. If not, see . /* key matrix size */ #define MATRIX_ROWS 5 -#define MATRIX_COLS 15 - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -#define LED_NUM_LOCK_PIN C15 -#define LED_CAPS_LOCK_PIN B2 -#define LED_SCROLL_LOCK_PIN B9 +#define MATRIX_COLS 15 \ No newline at end of file diff --git a/keyboards/mechlovin/adelais/rgb_led/config.h b/keyboards/mechlovin/adelais/rgb_led/config.h new file mode 100644 index 0000000000..2ec0afd47b --- /dev/null +++ b/keyboards/mechlovin/adelais/rgb_led/config.h @@ -0,0 +1,21 @@ +/* +Copyright 2020 Team Mechlovin' + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW diff --git a/keyboards/mechlovin/adelais/rgb_led/readme.md b/keyboards/mechlovin/adelais/rgb_led/readme.md deleted file mode 100644 index f58ca7aa29..0000000000 --- a/keyboards/mechlovin/adelais/rgb_led/readme.md +++ /dev/null @@ -1,16 +0,0 @@ -# Adelais En Ciel - -![adelais](https://i.imgur.com/6U1IfZe.png) - -Compatible with TGR Alice and all clone variants. -`rgb_led` (Adelais En Ciel) comes with per-key RGB LEDs pre-soldered, rev.2 and rev.3 support a rotary encoder. - -* Keyboard Maintainer: [Team Mechlovin'](https://github.com/mechlovin) -* Hardware Supported: Adelais En Ciel -* Hardware Availability: [Mechlovin.studio](https://mechlovin.studio/collections/pcb/products/adelais-en-ciel-alice-compatible-rgb-pcb?variant=33937050828939) - -Make example for this keyboard (after setting up your build environment): - - make mechlovin/adelais/rgb_led:default - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/mechlovin/adelais/rgb_led/rev1/config.h b/keyboards/mechlovin/adelais/rgb_led/rev1/config.h index d75cbd3f2a..97092e25e0 100644 --- a/keyboards/mechlovin/adelais/rgb_led/rev1/config.h +++ b/keyboards/mechlovin/adelais/rgb_led/rev1/config.h @@ -13,7 +13,12 @@ #define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses) #define RGB_MATRIX_FRAMEBUFFER_EFFECTS #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects -// #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended +#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 220 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set + + +#define LED_NUM_LOCK_PIN C15 +#define LED_CAPS_LOCK_PIN B2 +#define LED_SCROLL_LOCK_PIN B9 \ No newline at end of file diff --git a/keyboards/mechlovin/adelais/rgb_led/rev1/rev1.h b/keyboards/mechlovin/adelais/rgb_led/rev1/rev1.h index 16cdf9ed85..5a5673abc7 100644 --- a/keyboards/mechlovin/adelais/rgb_led/rev1/rev1.h +++ b/keyboards/mechlovin/adelais/rgb_led/rev1/rev1.h @@ -17,3 +17,33 @@ #pragma once #include "quantum.h" + +#define LAYOUT_alice_split_bs( \ + K1E, K00, K01, K02, K03, K04, K05, K06, K07,K08,K09, K0A, K0B, K0C, K0D, K0E,\ + K2E, K10, K11, K12, K13, K14, K15, K16,K17,K18, K19, K1A, K1B, K1C, K1D,\ + K3E, K20, K21, K22, K23, K24, K25, K26,K27,K28, K29, K2A, K2B, K2D,\ + K30, K32, K33, K34, K35, K36, K37,K38,K39, K3A, K3B, K3D, K3C, K4D,\ + K40, K42, K44, K46, K48, K4A, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, K2E }, \ + { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, KC_NO, K42, KC_NO, K44, KC_NO, K46, KC_NO, K48, KC_NO, K4A, KC_NO, KC_NO, K4D, K4E }, \ +} + +#define LAYOUT_alice( \ + K1E, K00, K01, K02, K03, K04, K05, K06, K07,K08,K09, K0A, K0B, K0C, K0D, \ + K2E, K10, K11, K12, K13, K14, K15, K16,K17,K18, K19, K1A, K1B, K1C, K1D,\ + K3E, K20, K21, K22, K23, K24, K25, K26,K27,K28, K29, K2A, K2B, K2D,\ + K30, K32, K33, K34, K35, K36, K37,K38,K39, K3A, K3B, K3D, K3C, K4D,\ + K40, K42, K44, K46, K48, K4A, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, KC_NO }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, K2E }, \ + { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, KC_NO, K42, KC_NO, K44, KC_NO, K46, KC_NO, K48, KC_NO, K4A, KC_NO, KC_NO, K4D, K4E }, \ +} + +#define LAYOUT_all LAYOUT_alice_split_bs diff --git a/keyboards/mechlovin/adelais/rgb_led/rev2/config.h b/keyboards/mechlovin/adelais/rgb_led/rev2/config.h index c830edce26..9c71c537b7 100644 --- a/keyboards/mechlovin/adelais/rgb_led/rev2/config.h +++ b/keyboards/mechlovin/adelais/rgb_led/rev2/config.h @@ -31,7 +31,7 @@ #define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses) #define RGB_MATRIX_FRAMEBUFFER_EFFECTS #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects -// #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended +#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set @@ -43,3 +43,8 @@ #define ENCODER_RESOLUTION 4 #define TAP_CODE_DELAY 10 + + +#define LED_NUM_LOCK_PIN C15 +#define LED_CAPS_LOCK_PIN B2 +#define LED_SCROLL_LOCK_PIN B9 \ No newline at end of file diff --git a/keyboards/mechlovin/adelais/rgb_led/rev2/rev2.h b/keyboards/mechlovin/adelais/rgb_led/rev2/rev2.h index 16cdf9ed85..5a5673abc7 100644 --- a/keyboards/mechlovin/adelais/rgb_led/rev2/rev2.h +++ b/keyboards/mechlovin/adelais/rgb_led/rev2/rev2.h @@ -17,3 +17,33 @@ #pragma once #include "quantum.h" + +#define LAYOUT_alice_split_bs( \ + K1E, K00, K01, K02, K03, K04, K05, K06, K07,K08,K09, K0A, K0B, K0C, K0D, K0E,\ + K2E, K10, K11, K12, K13, K14, K15, K16,K17,K18, K19, K1A, K1B, K1C, K1D,\ + K3E, K20, K21, K22, K23, K24, K25, K26,K27,K28, K29, K2A, K2B, K2D,\ + K30, K32, K33, K34, K35, K36, K37,K38,K39, K3A, K3B, K3D, K3C, K4D,\ + K40, K42, K44, K46, K48, K4A, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, K2E }, \ + { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, KC_NO, K42, KC_NO, K44, KC_NO, K46, KC_NO, K48, KC_NO, K4A, KC_NO, KC_NO, K4D, K4E }, \ +} + +#define LAYOUT_alice( \ + K1E, K00, K01, K02, K03, K04, K05, K06, K07,K08,K09, K0A, K0B, K0C, K0D, \ + K2E, K10, K11, K12, K13, K14, K15, K16,K17,K18, K19, K1A, K1B, K1C, K1D,\ + K3E, K20, K21, K22, K23, K24, K25, K26,K27,K28, K29, K2A, K2B, K2D,\ + K30, K32, K33, K34, K35, K36, K37,K38,K39, K3A, K3B, K3D, K3C, K4D,\ + K40, K42, K44, K46, K48, K4A, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, KC_NO }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, K2E }, \ + { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, KC_NO, K42, KC_NO, K44, KC_NO, K46, KC_NO, K48, KC_NO, K4A, KC_NO, KC_NO, K4D, K4E }, \ +} + +#define LAYOUT_all LAYOUT_alice_split_bs diff --git a/keyboards/mechlovin/adelais/rgb_led/rev3/config.h b/keyboards/mechlovin/adelais/rgb_led/rev3/config.h new file mode 100644 index 0000000000..f55d386f7a --- /dev/null +++ b/keyboards/mechlovin/adelais/rgb_led/rev3/config.h @@ -0,0 +1,77 @@ +/* +Copyright 2021 Mechlovin' Studio + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#define PRODUCT_ID 0xAEC3 +#define PRODUCT Adelais En Ciel Rev3 + +#define MATRIX_ROW_PINS { A4, A3, C13, A1, A2} +#define MATRIX_COL_PINS { B10, B11, B2, B1, B0, A6, A5, A14, A13, A15, B3, B4, B5, B8, B9 } + +#define RGB_DI_PIN A7 +#define WS2812_SPI SPID1 // default: SPID1 +#define WS2812_SPI_MOSI_PAL_MODE 5 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 5 +#define RGBLED_NUM 23 +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 + +//rgb matrix setting +// This is a 7-bit address, that gets left-shifted and bit 0 +// set to 0 for write, 1 for read (as per I2C protocol) +// The address will vary depending on your wiring: +// 0b1110100 AD <-> GND +// 0b1110111 AD <-> VCC +// 0b1110101 AD <-> SCL +// 0b1110110 AD <-> SDA +#define DRIVER_ADDR_1 0b0110010 +#define DRIVER_ADDR_2 0b0110010 +#define DRIVER_COUNT 1 +#define DRIVER_1_LED_TOTAL 66 +#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL +#define RGB_MATRIX_KEYPRESSES // reacts to keypresses +#define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses) +#define RGB_MATRIX_FRAMEBUFFER_EFFECTS +#define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects +#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended +#define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) +#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 +#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set + +#define RGB_MATRIX_DISABLE_KEYCODES + +#define ENCODERS_PAD_A { B12 } +#define ENCODERS_PAD_B { B13 } +#define ENCODER_RESOLUTION 4 + +#define TAP_CODE_DELAY 10 + + +#define LED_NUM_LOCK_PIN A0 +#define LED_CAPS_LOCK_PIN C14 +#define LED_SCROLL_LOCK_PIN C15 \ No newline at end of file diff --git a/keyboards/mechlovin/adelais/standard_led/halconf.h b/keyboards/mechlovin/adelais/rgb_led/rev3/halconf.h similarity index 99% rename from keyboards/mechlovin/adelais/standard_led/halconf.h rename to keyboards/mechlovin/adelais/rgb_led/rev3/halconf.h index 01d02f71c3..d001829d03 100644 --- a/keyboards/mechlovin/adelais/standard_led/halconf.h +++ b/keyboards/mechlovin/adelais/rgb_led/rev3/halconf.h @@ -14,7 +14,6 @@ * along with this program. If not, see . */ - #pragma once #define HAL_USE_I2C TRUE diff --git a/keyboards/mechlovin/adelais/standard_led/mcuconf.h b/keyboards/mechlovin/adelais/rgb_led/rev3/mcuconf.h similarity index 99% rename from keyboards/mechlovin/adelais/standard_led/mcuconf.h rename to keyboards/mechlovin/adelais/rgb_led/rev3/mcuconf.h index b7ecee0204..20d2a82c27 100644 --- a/keyboards/mechlovin/adelais/standard_led/mcuconf.h +++ b/keyboards/mechlovin/adelais/rgb_led/rev3/mcuconf.h @@ -14,7 +14,6 @@ * along with this program. If not, see . */ - #pragma once #include_next diff --git a/keyboards/mechlovin/adelais/rgb_led/rev3/rev3.c b/keyboards/mechlovin/adelais/rgb_led/rev3/rev3.c new file mode 100644 index 0000000000..7631bc8505 --- /dev/null +++ b/keyboards/mechlovin/adelais/rgb_led/rev3/rev3.c @@ -0,0 +1,166 @@ +/* Copyright 2021 Team Mechlovin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "rev3.h" + +#ifdef RGB_MATRIX_ENABLE +const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { + {0, CS3_SW5, CS2_SW5, CS1_SW5}, /* D9-K31-00 */ + {0, CS6_SW5, CS5_SW5, CS4_SW5}, /* D46-K00-01 */ + {0, CS6_SW9, CS5_SW9, CS4_SW9}, /* D59-K01-02 */ + {0, CS9_SW5, CS8_SW5, CS7_SW5}, /* D73-K02-03 */ + {0, CS9_SW9, CS8_SW9, CS7_SW9}, /* D75-K03-04 */ + {0, CS12_SW5, CS11_SW5, CS10_SW5}, /* D77-K04-05 */ + {0, CS12_SW9, CS11_SW9, CS10_SW9}, /* D79-K05-06 */ + {0, CS15_SW5, CS14_SW5, CS13_SW5}, /* D81-K06-07 */ + {0, CS15_SW9, CS14_SW9, CS13_SW9}, /* D83-K07-08 */ + {0, CS18_SW5, CS17_SW5, CS16_SW5}, /* D85-K08-09 */ + {0, CS18_SW9, CS17_SW9, CS16_SW9}, /* D87-K09-10 */ + {0, CS21_SW5, CS20_SW5, CS19_SW5}, /* D90-K0A-11 */ + {0, CS21_SW9, CS20_SW9, CS19_SW9}, /* D93-K0B-12 */ + {0, CS24_SW5, CS23_SW5, CS22_SW5}, /* D95-K0C-13 */ + {0, CS24_SW9, CS23_SW9, CS22_SW9}, /* D98-K0D-14 */ + {0, CS24_SW3, CS23_SW3, CS22_SW3}, /* D100-K0E-15 */ + {0, CS3_SW4, CS2_SW4, CS1_SW4}, /* D94-K41-16 */ + {0, CS6_SW4, CS5_SW4, CS4_SW4}, /* D92-K10-17 */ + {0, CS6_SW6, CS5_SW6, CS4_SW6}, /* D89-K11-18 */ + {0, CS9_SW4, CS8_SW4, CS7_SW4}, /* D86-K12-19 */ + {0, CS9_SW6, CS8_SW6, CS7_SW6}, /* D84-K13-20 */ + {0, CS12_SW4, CS11_SW4, CS10_SW4}, /* D82-K14-21 */ + {0, CS12_SW6, CS11_SW6, CS10_SW6}, /* D80-K15-22 */ + {0, CS15_SW4, CS14_SW4, CS13_SW4}, /* D78-K16-23 */ + {0, CS15_SW6, CS14_SW6, CS13_SW6}, /* D76-K17-24 */ + {0, CS18_SW4, CS17_SW4, CS16_SW4}, /* D74-K18-25 */ + {0, CS18_SW6, CS17_SW6, CS16_SW6}, /* D72-K19-26 */ + {0, CS21_SW4, CS20_SW4, CS19_SW4}, /* D51-K1A-27 */ + {0, CS21_SW6, CS20_SW6, CS19_SW6}, /* D10-K1B-28 */ + {0, CS24_SW4, CS23_SW4, CS22_SW4}, /* D101-K1C-29 */ + {0, CS24_SW6, CS23_SW6, CS22_SW6}, /* D104-K1D-30 */ + {0, CS3_SW3, CS2_SW3, CS1_SW3}, /* D108-K43-31 */ + {0, CS6_SW3, CS5_SW3, CS4_SW3}, /* D111-K20-32 */ + {0, CS6_SW7, CS5_SW7, CS4_SW7}, /* D114-K21-33 */ + {0, CS9_SW3, CS8_SW3, CS7_SW3}, /* D117-K22-34 */ + {0, CS9_SW7, CS8_SW7, CS7_SW7}, /* D120-K23-35 */ + {0, CS12_SW3, CS11_SW3, CS10_SW3}, /* D123-K24-36 */ + {0, CS12_SW7, CS11_SW7, CS10_SW7}, /* D126-K25-37 */ + {0, CS15_SW3, CS14_SW3, CS13_SW3}, /* D129-K26-38 */ + {0, CS15_SW7, CS14_SW7, CS13_SW7}, /* D133-K27-39 */ + {0, CS18_SW3, CS17_SW3, CS16_SW3}, /* D142-K28-40 */ + {0, CS18_SW7, CS17_SW7, CS16_SW7}, /* D146-K29-41 */ + {0, CS21_SW3, CS20_SW3, CS19_SW3}, /* D160-K2A-42 */ + {0, CS21_SW7, CS20_SW7, CS19_SW7}, /* D167-K2B-43 */ + {0, CS24_SW7, CS23_SW7, CS22_SW7}, /* D168-K2D-44 */ + + {0, CS6_SW2, CS5_SW2, CS4_SW2}, /* D163-K30-45 */ + {0, CS6_SW8, CS5_SW8, CS4_SW8}, /* D147-K31-46 */ + {0, CS9_SW2, CS8_SW2, CS7_SW2}, /* D144-K32-47 */ + {0, CS9_SW8, CS8_SW8, CS7_SW8}, /* D137-K33-48 */ + {0, CS12_SW2, CS11_SW2, CS10_SW2}, /* D130-K34-49 */ + {0, CS12_SW8, CS11_SW8, CS10_SW8}, /* D127-K35-50 */ + {0, CS15_SW2, CS14_SW2, CS13_SW2}, /* D124-K36-51 */ + {0, CS15_SW8, CS14_SW8, CS13_SW8}, /* D121-K37-52 */ + {0, CS18_SW2, CS17_SW2, CS16_SW2}, /* D118-K38-53 */ + {0, CS18_SW8, CS17_SW8, CS16_SW8}, /* D115-K39-54 */ + {0, CS21_SW2, CS20_SW2, CS19_SW2}, /* D112-K3A-55 */ + {0, CS21_SW8, CS20_SW8, CS19_SW8}, /* D109-K3B-56 */ + {0, CS24_SW2, CS23_SW2, CS22_SW2}, /* D105-K3D-57 */ + {0, CS24_SW8, CS23_SW8, CS22_SW8}, /* D103-K3E-58 */ + + {0, CS3_SW1, CS2_SW1, CS1_SW1}, /* D163-K40-59 */ + {0, CS6_SW1, CS5_SW1, CS4_SW1}, /* D147-K42-60 */ + {0, CS9_SW1, CS8_SW1, CS7_SW1}, /* D137-K44-61 */ + {0, CS12_SW1, CS11_SW1, CS10_SW1}, /* D127-K46-62 */ + {0, CS15_SW1, CS14_SW1, CS13_SW1}, /* D121-K48-63 */ + {0, CS18_SW1, CS17_SW1, CS16_SW1}, /* D115-K4A-64 */ + {0, CS24_SW1, CS23_SW1, CS22_SW1}, /* D103-K4E-65 */ +}; + +led_config_t g_led_config = { + { + // Key Matrix to LED Index + { 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15}, + {17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, NO_LED}, + {32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, NO_LED, 44, NO_LED}, + {45, NO_LED, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58}, + {59, NO_LED, 60, NO_LED, 61, NO_LED, 62, NO_LED, 63, NO_LED, 64, NO_LED, NO_LED, NO_LED, 65}, + }, { + //LED Index to Physical Positon + {0,0}, { 17, 0}, { 34, 0 }, { 51, 0 }, { 69, 0}, { 86, 0}, {100, 0}, {103, 0}, { 120, 0}, { 138, 0}, { 155, 0}, { 172, 0}, { 189, 0}, {207, 0}, {215, 0}, {224, 0}, + {0,16}, { 17, 16}, { 34,16 }, { 51,16 }, { 69,16}, { 86,16}, {103,16}, { 120,16}, { 138,16}, { 155,16}, { 172,16}, { 189,16}, {207, 16}, {215, 16}, {224,16}, + {0,32}, { 17, 32}, { 34,32 }, { 51,32 }, { 69,32}, { 86,32}, {103,32}, { 120,32}, { 138,32}, { 155,32}, { 172,32}, { 189,32}, {207, 32}, {224,32}, + { 17, 48}, { 34,48 }, { 51,48 }, { 69,48}, { 86,48}, {103,48}, { 120,48}, { 138,48}, { 155,48}, { 172,48}, { 189,48}, {207, 48}, {215, 48}, {224,48}, + { 17, 64}, { 51,64 }, { 86,64}, { 103,64}, { 138,64}, { 172,64}, {224, 64}, + }, { + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, + } +}; + +__attribute__((weak)) void rgb_matrix_indicators_user(void) { + if (host_keyboard_led_state().caps_lock) { + rgb_matrix_set_color(32, 255, 255, 255); + } +} + + +#endif + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + if (record->event.pressed) { + switch(keycode) { + #ifdef RGBLIGHT_ENABLE + #ifdef RGB_MATRIX_ENABLE + case KC_F13: // toggle rgb matrix + rgb_matrix_toggle(); + return false; + case KC_F14: + rgb_matrix_step(); + return false; + case KC_F15: + rgb_matrix_increase_speed(); + return false; + case KC_F16: + rgb_matrix_decrease_speed(); + return false; + case KC_F17: + rgb_matrix_increase_hue(); + return false; + case KC_F18: + rgb_matrix_decrease_hue(); + return false; + case KC_F19: + rgb_matrix_increase_sat(); + return false; + case KC_F20: + rgb_matrix_decrease_sat(); + return false; + case KC_F21: + rgb_matrix_increase_val(); + return false; + case KC_F22: + rgb_matrix_decrease_val(); + return false; + #endif + #endif + default: + break; + } + } + return true; +} \ No newline at end of file diff --git a/keyboards/mechlovin/adelais/rgb_led/rev3/rev3.h b/keyboards/mechlovin/adelais/rgb_led/rev3/rev3.h new file mode 100644 index 0000000000..601bba8db6 --- /dev/null +++ b/keyboards/mechlovin/adelais/rgb_led/rev3/rev3.h @@ -0,0 +1,52 @@ +/* Copyright 2021 Team Mechlovin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +#include "quantum.h" + +#define LAYOUT_alice_split_bs( \ + K31, K00, K01, K02, K03, K04, K05, K06, K07,K08,K09, K0A, K0B, K0C, K0D, K0E,\ + K41, K10, K11, K12, K13, K14, K15, K16,K17,K18, K19, K1A, K1B, K1C, K1D,\ + K43, K20, K21, K22, K23, K24, K25, K26,K27,K28, K29, K2A, K2B, K2D,\ + K30, K32, K33, K34, K35, K36, K37,K38,K39, K3A, K3B, K3C, K3D, K3E,\ + K40, K42, K44, K46, K48, K4A, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, KC_NO }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, KC_NO }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, K41, K42, K43, K44, KC_NO, K46, KC_NO, K48, KC_NO, K4A, KC_NO, KC_NO, KC_NO, K4E }, \ +} + +#define LAYOUT_alice( \ + K31, K00, K01, K02, K03, K04, K05, K06, K07,K08,K09, K0A, K0B, K0C, K0D,\ + K41, K10, K11, K12, K13, K14, K15, K16,K17,K18, K19, K1A, K1B, K1C, K1D,\ + K43, K20, K21, K22, K23, K24, K25, K26,K27,K28, K29, K2A, K2B, K2D,\ + K30, K32, K33, K34, K35, K36, K37,K38,K39, K3A, K3B, K3C, K3D, K3E,\ + K40, K42, K44, K46, K48, K4A, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, KC_NO }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, KC_NO }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, KC_NO }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, K41, K42, K43, K44, KC_NO, K46, KC_NO, K48, KC_NO, K4A, KC_NO, KC_NO, KC_NO, K4E }, \ +} + +#define LAYOUT_all LAYOUT_alice_split_bs + diff --git a/keyboards/mechlovin/adelais/rgb_led/rev3/rules.mk b/keyboards/mechlovin/adelais/rgb_led/rev3/rules.mk new file mode 100644 index 0000000000..904d20877b --- /dev/null +++ b/keyboards/mechlovin/adelais/rgb_led/rev3/rules.mk @@ -0,0 +1,5 @@ +RGB_MATRIX_ENABLE = yes +RGB_MATRIX_DRIVER = IS31FL3741 +RGBLIGHT_ENABLE = yes +ENCODER_ENABLE = yes +WS2812_DRIVER = spi diff --git a/keyboards/mechlovin/adelais/rules.mk b/keyboards/mechlovin/adelais/rules.mk index a3531ff091..8b6c9a433e 100644 --- a/keyboards/mechlovin/adelais/rules.mk +++ b/keyboards/mechlovin/adelais/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug @@ -21,4 +21,4 @@ AUDIO_ENABLE = no # Audio output LAYOUTS = alice alice_split_bs -DEFAULT_FOLDER = mechlovin/adelais/standard_led/rev2 +DEFAULT_FOLDER = mechlovin/adelais/standard_led/arm/rev2 diff --git a/keyboards/mechlovin/adelais/standard_led/.noci b/keyboards/mechlovin/adelais/standard_led/arm/.noci similarity index 100% rename from keyboards/mechlovin/adelais/standard_led/.noci rename to keyboards/mechlovin/adelais/standard_led/arm/.noci diff --git a/keyboards/mechlovin/adelais/standard_led/arm/chconf.h b/keyboards/mechlovin/adelais/standard_led/arm/chconf.h new file mode 100644 index 0000000000..fe716d6552 --- /dev/null +++ b/keyboards/mechlovin/adelais/standard_led/arm/chconf.h @@ -0,0 +1,24 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#define CH_CFG_ST_TIMEDELTA 0 + +#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE + +#include_next + diff --git a/keyboards/mechlovin/adelais/standard_led/config.h b/keyboards/mechlovin/adelais/standard_led/arm/config.h similarity index 88% rename from keyboards/mechlovin/adelais/standard_led/config.h rename to keyboards/mechlovin/adelais/standard_led/arm/config.h index 4580e56d5a..4377405fc6 100644 --- a/keyboards/mechlovin/adelais/standard_led/config.h +++ b/keyboards/mechlovin/adelais/standard_led/arm/config.h @@ -23,6 +23,9 @@ along with this program. If not, see . #define MATRIX_COL_PINS { A10, A9, A8, B15, B14, B13, B12, B11, B10, B8, B4, B5, B3, C14, A15 } #define UNUSED_PINS +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + #define BACKLIGHT_PIN B0 #define BACKLIGHT_BREATHING #define BACKLIGHT_PWM_DRIVER PWMD3 @@ -32,3 +35,8 @@ along with this program. If not, see . #define RGBLED_NUM 23 #define RGBLIGHT_LIMIT_VAL 255 #define RGBLIGHT_ANIMATIONS + + +#define LED_NUM_LOCK_PIN C15 +#define LED_CAPS_LOCK_PIN B2 +#define LED_SCROLL_LOCK_PIN B9 diff --git a/keyboards/mechlovin/adelais/standard_led/arm/halconf.h b/keyboards/mechlovin/adelais/standard_led/arm/halconf.h new file mode 100644 index 0000000000..aca546705d --- /dev/null +++ b/keyboards/mechlovin/adelais/standard_led/arm/halconf.h @@ -0,0 +1,24 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#define HAL_USE_PWM TRUE + +#define HAL_USE_SPI TRUE + +#include_next + diff --git a/keyboards/mechlovin/adelais/standard_led/arm/mcuconf.h b/keyboards/mechlovin/adelais/standard_led/arm/mcuconf.h new file mode 100644 index 0000000000..ac5a23c70e --- /dev/null +++ b/keyboards/mechlovin/adelais/standard_led/arm/mcuconf.h @@ -0,0 +1,29 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + + +#pragma once + +#include_next + +#undef STM32_SPI_USE_SPI1 +#define STM32_SPI_USE_SPI1 TRUE + +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE + + + diff --git a/keyboards/mechlovin/adelais/standard_led/readme.md b/keyboards/mechlovin/adelais/standard_led/arm/readme.md similarity index 94% rename from keyboards/mechlovin/adelais/standard_led/readme.md rename to keyboards/mechlovin/adelais/standard_led/arm/readme.md index a7c76beb49..9011ff3a88 100644 --- a/keyboards/mechlovin/adelais/standard_led/readme.md +++ b/keyboards/mechlovin/adelais/standard_led/arm/readme.md @@ -11,6 +11,6 @@ Compatible with TGR Alice and all clone variants. Make example for this keyboard (after setting up your build environment): - make mechlovin/adelais/standard_led:default + make mechlovin/adelais/standard_led/arm:default See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/mechlovin/adelais/standard_led/rev2/.noci b/keyboards/mechlovin/adelais/standard_led/arm/rev2/.noci similarity index 100% rename from keyboards/mechlovin/adelais/standard_led/rev2/.noci rename to keyboards/mechlovin/adelais/standard_led/arm/rev2/.noci diff --git a/keyboards/mechlovin/adelais/standard_led/rev2/config.h b/keyboards/mechlovin/adelais/standard_led/arm/rev2/config.h similarity index 100% rename from keyboards/mechlovin/adelais/standard_led/rev2/config.h rename to keyboards/mechlovin/adelais/standard_led/arm/rev2/config.h diff --git a/keyboards/mechlovin/adelais/standard_led/arm/rev2/rev2.h b/keyboards/mechlovin/adelais/standard_led/arm/rev2/rev2.h new file mode 100644 index 0000000000..5a5673abc7 --- /dev/null +++ b/keyboards/mechlovin/adelais/standard_led/arm/rev2/rev2.h @@ -0,0 +1,49 @@ +/* Copyright 2020 Team Mechlovin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +#define LAYOUT_alice_split_bs( \ + K1E, K00, K01, K02, K03, K04, K05, K06, K07,K08,K09, K0A, K0B, K0C, K0D, K0E,\ + K2E, K10, K11, K12, K13, K14, K15, K16,K17,K18, K19, K1A, K1B, K1C, K1D,\ + K3E, K20, K21, K22, K23, K24, K25, K26,K27,K28, K29, K2A, K2B, K2D,\ + K30, K32, K33, K34, K35, K36, K37,K38,K39, K3A, K3B, K3D, K3C, K4D,\ + K40, K42, K44, K46, K48, K4A, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, K2E }, \ + { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, KC_NO, K42, KC_NO, K44, KC_NO, K46, KC_NO, K48, KC_NO, K4A, KC_NO, KC_NO, K4D, K4E }, \ +} + +#define LAYOUT_alice( \ + K1E, K00, K01, K02, K03, K04, K05, K06, K07,K08,K09, K0A, K0B, K0C, K0D, \ + K2E, K10, K11, K12, K13, K14, K15, K16,K17,K18, K19, K1A, K1B, K1C, K1D,\ + K3E, K20, K21, K22, K23, K24, K25, K26,K27,K28, K29, K2A, K2B, K2D,\ + K30, K32, K33, K34, K35, K36, K37,K38,K39, K3A, K3B, K3D, K3C, K4D,\ + K40, K42, K44, K46, K48, K4A, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, KC_NO }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, K2E }, \ + { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, KC_NO, K42, KC_NO, K44, KC_NO, K46, KC_NO, K48, KC_NO, K4A, KC_NO, KC_NO, K4D, K4E }, \ +} + +#define LAYOUT_all LAYOUT_alice_split_bs diff --git a/keyboards/mechlovin/adelais/standard_led/rev2/rules.mk b/keyboards/mechlovin/adelais/standard_led/arm/rev2/rules.mk similarity index 100% rename from keyboards/mechlovin/adelais/standard_led/rev2/rules.mk rename to keyboards/mechlovin/adelais/standard_led/arm/rev2/rules.mk diff --git a/keyboards/mechlovin/adelais/standard_led/rev3/config.h b/keyboards/mechlovin/adelais/standard_led/arm/rev3/config.h similarity index 100% rename from keyboards/mechlovin/adelais/standard_led/rev3/config.h rename to keyboards/mechlovin/adelais/standard_led/arm/rev3/config.h diff --git a/keyboards/mechlovin/adelais/standard_led/arm/rev3/rev3.h b/keyboards/mechlovin/adelais/standard_led/arm/rev3/rev3.h new file mode 100644 index 0000000000..5a5673abc7 --- /dev/null +++ b/keyboards/mechlovin/adelais/standard_led/arm/rev3/rev3.h @@ -0,0 +1,49 @@ +/* Copyright 2020 Team Mechlovin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +#define LAYOUT_alice_split_bs( \ + K1E, K00, K01, K02, K03, K04, K05, K06, K07,K08,K09, K0A, K0B, K0C, K0D, K0E,\ + K2E, K10, K11, K12, K13, K14, K15, K16,K17,K18, K19, K1A, K1B, K1C, K1D,\ + K3E, K20, K21, K22, K23, K24, K25, K26,K27,K28, K29, K2A, K2B, K2D,\ + K30, K32, K33, K34, K35, K36, K37,K38,K39, K3A, K3B, K3D, K3C, K4D,\ + K40, K42, K44, K46, K48, K4A, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, K2E }, \ + { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, KC_NO, K42, KC_NO, K44, KC_NO, K46, KC_NO, K48, KC_NO, K4A, KC_NO, KC_NO, K4D, K4E }, \ +} + +#define LAYOUT_alice( \ + K1E, K00, K01, K02, K03, K04, K05, K06, K07,K08,K09, K0A, K0B, K0C, K0D, \ + K2E, K10, K11, K12, K13, K14, K15, K16,K17,K18, K19, K1A, K1B, K1C, K1D,\ + K3E, K20, K21, K22, K23, K24, K25, K26,K27,K28, K29, K2A, K2B, K2D,\ + K30, K32, K33, K34, K35, K36, K37,K38,K39, K3A, K3B, K3D, K3C, K4D,\ + K40, K42, K44, K46, K48, K4A, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, KC_NO }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, K2E }, \ + { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, KC_NO, K42, KC_NO, K44, KC_NO, K46, KC_NO, K48, KC_NO, K4A, KC_NO, KC_NO, K4D, K4E }, \ +} + +#define LAYOUT_all LAYOUT_alice_split_bs diff --git a/keyboards/mechlovin/adelais/standard_led/rev3/rules.mk b/keyboards/mechlovin/adelais/standard_led/arm/rev3/rules.mk similarity index 100% rename from keyboards/mechlovin/adelais/standard_led/rev3/rules.mk rename to keyboards/mechlovin/adelais/standard_led/arm/rev3/rules.mk diff --git a/keyboards/mechlovin/adelais/standard_led/arm/rev4/apm32f103/rules.mk b/keyboards/mechlovin/adelais/standard_led/arm/rev4/apm32f103/rules.mk new file mode 100644 index 0000000000..34cbe43495 --- /dev/null +++ b/keyboards/mechlovin/adelais/standard_led/arm/rev4/apm32f103/rules.mk @@ -0,0 +1,5 @@ +# MCU name +MCU = STM32F103 + +# Bootloader selection +BOOTLOADER = stm32duino diff --git a/keyboards/mechlovin/adelais/standard_led/rev4/config.h b/keyboards/mechlovin/adelais/standard_led/arm/rev4/config.h similarity index 100% rename from keyboards/mechlovin/adelais/standard_led/rev4/config.h rename to keyboards/mechlovin/adelais/standard_led/arm/rev4/config.h diff --git a/keyboards/mechlovin/adelais/standard_led/arm/rev4/readme.md b/keyboards/mechlovin/adelais/standard_led/arm/rev4/readme.md new file mode 100644 index 0000000000..8035195b0f --- /dev/null +++ b/keyboards/mechlovin/adelais/standard_led/arm/rev4/readme.md @@ -0,0 +1,16 @@ +# Adelais rev.4 + +![adelais](https://i.imgur.com/6U1IfZe.png) + +Compatible with TGR Alice and all clone variants. +`standard_led` (Adelais) comes with backlight and RGB underglow LEDs pre-soldered. Adelais rev.4 support 3 rotary encoder, USB TypeC both side and reset footprint. + +* Keyboard Maintainer: [Team Mechlovin'](https://mechlovin.studio) +* Hardware Supported: Adelais rev. 4 +* Hardware Availability: [Mechlovin.studio](https://mechlovin.studio/collections/pcb/products/adelais-tgr-alice-clones-compatible-pcb?variant=34140335472779) + +Make example for this keyboard (after setting up your build environment): + + make mechlovin/adelais/standard_led/rev4:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/mechlovin/adelais/standard_led/arm/rev4/rev4.h b/keyboards/mechlovin/adelais/standard_led/arm/rev4/rev4.h new file mode 100644 index 0000000000..5a5673abc7 --- /dev/null +++ b/keyboards/mechlovin/adelais/standard_led/arm/rev4/rev4.h @@ -0,0 +1,49 @@ +/* Copyright 2020 Team Mechlovin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +#define LAYOUT_alice_split_bs( \ + K1E, K00, K01, K02, K03, K04, K05, K06, K07,K08,K09, K0A, K0B, K0C, K0D, K0E,\ + K2E, K10, K11, K12, K13, K14, K15, K16,K17,K18, K19, K1A, K1B, K1C, K1D,\ + K3E, K20, K21, K22, K23, K24, K25, K26,K27,K28, K29, K2A, K2B, K2D,\ + K30, K32, K33, K34, K35, K36, K37,K38,K39, K3A, K3B, K3D, K3C, K4D,\ + K40, K42, K44, K46, K48, K4A, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, K2E }, \ + { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, KC_NO, K42, KC_NO, K44, KC_NO, K46, KC_NO, K48, KC_NO, K4A, KC_NO, KC_NO, K4D, K4E }, \ +} + +#define LAYOUT_alice( \ + K1E, K00, K01, K02, K03, K04, K05, K06, K07,K08,K09, K0A, K0B, K0C, K0D, \ + K2E, K10, K11, K12, K13, K14, K15, K16,K17,K18, K19, K1A, K1B, K1C, K1D,\ + K3E, K20, K21, K22, K23, K24, K25, K26,K27,K28, K29, K2A, K2B, K2D,\ + K30, K32, K33, K34, K35, K36, K37,K38,K39, K3A, K3B, K3D, K3C, K4D,\ + K40, K42, K44, K46, K48, K4A, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, KC_NO }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, K2E }, \ + { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, KC_NO, K42, KC_NO, K44, KC_NO, K46, KC_NO, K48, KC_NO, K4A, KC_NO, KC_NO, K4D, K4E }, \ +} + +#define LAYOUT_all LAYOUT_alice_split_bs diff --git a/keyboards/mechlovin/adelais/standard_led/rev4/rules.mk b/keyboards/mechlovin/adelais/standard_led/arm/rev4/rules.mk similarity index 100% rename from keyboards/mechlovin/adelais/standard_led/rev4/rules.mk rename to keyboards/mechlovin/adelais/standard_led/arm/rev4/rules.mk diff --git a/keyboards/mechlovin/adelais/standard_led/arm/rev4/stm32f303/rules.mk b/keyboards/mechlovin/adelais/standard_led/arm/rev4/stm32f303/rules.mk new file mode 100644 index 0000000000..7a846816d1 --- /dev/null +++ b/keyboards/mechlovin/adelais/standard_led/arm/rev4/stm32f303/rules.mk @@ -0,0 +1,6 @@ +# MCU name +MCU = STM32F303 +BOARD = QMK_PROTON_C + +# Bootloader selection +BOOTLOADER = stm32-dfu diff --git a/keyboards/mechlovin/adelais/standard_led/arm/rules.mk b/keyboards/mechlovin/adelais/standard_led/arm/rules.mk new file mode 100644 index 0000000000..2a0951eabd --- /dev/null +++ b/keyboards/mechlovin/adelais/standard_led/arm/rules.mk @@ -0,0 +1,2 @@ +WS2812_DRIVER = spi +DEFAULT_FOLDER = mechlovin/adelais/standard_led/arm/rev2 \ No newline at end of file diff --git a/keyboards/mechlovin/adelais/standard_led/avr/.noci b/keyboards/mechlovin/adelais/standard_led/avr/.noci new file mode 100644 index 0000000000..e69de29bb2 diff --git a/keyboards/mechlovin/adelais/standard_led/rev4/readme.md b/keyboards/mechlovin/adelais/standard_led/avr/readme.md similarity index 85% rename from keyboards/mechlovin/adelais/standard_led/rev4/readme.md rename to keyboards/mechlovin/adelais/standard_led/avr/readme.md index 333efbacdb..aaae225efb 100644 --- a/keyboards/mechlovin/adelais/standard_led/rev4/readme.md +++ b/keyboards/mechlovin/adelais/standard_led/avr/readme.md @@ -1,16 +1,16 @@ -# Adelais rev.4 +# Adelais AVR ![adelais](https://i.imgur.com/6U1IfZe.png) Compatible with TGR Alice and all clone variants. `standard_led` (Adelais) comes with backlight and RGB underglow LEDs pre-soldered. Adelais rev.4 support 3 rotary encoder, USB TypeC both side and reset footprint. -* Keyboard Maintainer: [Team Mechlovin'](https://github.com/mechlovin) +* Keyboard Maintainer: [Team Mechlovin'](https://mechlovin.studio) * Hardware Supported: Adelais * Hardware Availability: [Mechlovin.studio](https://mechlovin.studio/collections/pcb/products/adelais-tgr-alice-clones-compatible-pcb?variant=34140335472779) Make example for this keyboard (after setting up your build environment): - make mechlovin/adelais/standard_led:default + make mechlovin/adelais/standard_led/avr:default See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/mechlovin/adelais/standard_led/avr/rev1/config.h b/keyboards/mechlovin/adelais/standard_led/avr/rev1/config.h new file mode 100644 index 0000000000..9093d262e4 --- /dev/null +++ b/keyboards/mechlovin/adelais/standard_led/avr/rev1/config.h @@ -0,0 +1,67 @@ +/* +Copyright 2021 Mechlovin' Studio + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#pragma once + +#define PRODUCT_ID 0xAD04 +#define PRODUCT Adelais AVR +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION ROW2COL + +#define LED_NUM_LOCK_PIN D7 +#define LED_CAPS_LOCK_PIN E6 +#define LED_SCROLL_LOCK_PIN F7 +#define LED_PIN_ON_STATE 1 + +#define BACKLIGHT_PIN B5 +#define BACKLIGHT_LEVELS 3 +#define BACKLIGHT_BREATHING + +#define RGB_DI_PIN E2 +#define RGBLED_NUM 23 +#define RGBLIGHT_LIMIT_VAL 255 +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE + +#define ENCODERS_PAD_A { D3, D5, C7 } +#define ENCODERS_PAD_B { D2, B6, C6 } +#define ENCODER_RESOLUTION 4 + +#define TAP_CODE_DELAY 10 + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 \ No newline at end of file diff --git a/keyboards/mechlovin/adelais/standard_led/avr/rev1/matrix.c b/keyboards/mechlovin/adelais/standard_led/avr/rev1/matrix.c new file mode 100644 index 0000000000..37046790fe --- /dev/null +++ b/keyboards/mechlovin/adelais/standard_led/avr/rev1/matrix.c @@ -0,0 +1,363 @@ +/* +Copyright 2012-2018 Jun Wako, Jack Humbert, Yiancar +Copyright 2019 Evy Dekkers + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include +#include +#include "wait.h" +#include "util.h" +#include "matrix.h" +#include "debounce.h" +#include "quantum.h" + +#ifdef DIRECT_PINS +static pin_t direct_pins[MATRIX_ROWS][MATRIX_COLS] = DIRECT_PINS; +#elif (DIODE_DIRECTION == ROW2COL) || (DIODE_DIRECTION == COL2ROW) +static const pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; +//static const pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; +#endif + +// matrix code + +#ifdef DIRECT_PINS + +static void init_pins(void) { + for (int row = 0; row < MATRIX_ROWS; row++) { + for (int col = 0; col < MATRIX_COLS; col++) { + pin_t pin = direct_pins[row][col]; + if (pin != NO_PIN) { + setPinInputHigh(pin); + } + } + } +} + +static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) { + matrix_row_t last_row_value = current_matrix[current_row]; + current_matrix[current_row] = 0; + + for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) { + pin_t pin = direct_pins[current_row][col_index]; + if (pin != NO_PIN) { + current_matrix[current_row] |= readPin(pin) ? 0 : (MATRIX_ROW_SHIFTER << col_index); + } + } + + return (last_row_value != current_matrix[current_row]); +} + +#elif (DIODE_DIRECTION == ROW2COL) + +/* Cols 0 - 14 + * These columns use two 74HC138 3 to 8 bit demultiplexer. B0, F1 is the enable pin, must be set high (1) to use it. + * + * col / pin: PF4 PF1 PF0 PF5 PF6 + * 0: 0 ── 0 ── 1 1 ── 0 + * ───────────────────────────────────── + * 1: 0 ── 1 ── 0 1 ── 0 + * ───────────────────────────────────── + * 2: 0 ── 1 ── 1 1 ── 0 + * ───────────────────────────────────── + * 3: 1 ── 0 ── 0 1 ── 0 + * ───────────────────────────────────── + * 4: 1 ── 0 ── 1 1 ── 0 + * ───────────────────────────────────── + * 5: 1 ── 1 ── 1 1 ── 0 + * ───────────────────────────────────── + * 6: 1 ── 1 ── 1 0 ── 1 + * ───────────────────────────────────── + * 7: 0 ── 0 ── 0 0 ── 1 + * ───────────────────────────────────── + * 8: 0 ── 0 ── 1 0 ── 1 + * ───────────────────────────────────── + * 9: 0 ── 1 ── 0 0 ── 1 + * ───────────────────────────────────── + *10: 0 ── 1 ── 1 0 ── 1 + * ───────────────────────────────────── + *11: 1 ── 0 ── 0 0 ── 1 + * ───────────────────────────────────── + *12: 1 ── 0 ── 1 0 ── 1 + * ───────────────────────────────────── + *13: 1 ── 1 ── 0 0 ── 1 + * ───────────────────────────────────── + *14: 0 ── 0 ── 0 1 ── 0 + * + */ +static void select_col(uint8_t col) { + switch (col) { + case 0: + writePinLow(F4); + writePinLow(F1); + writePinHigh(F0); + writePinHigh(F5); + break; + case 1: + writePinLow(F4); + writePinHigh(F1); + writePinLow(F0); + writePinHigh(F5); + break; + case 2: + writePinLow(F4); + writePinHigh(F1); + writePinHigh(F0); + writePinHigh(F5); + break; + case 3: + writePinHigh(F4); + writePinLow(F1); + writePinLow(F0); + writePinHigh(F5); + break; + case 4: + writePinHigh(F4); + writePinLow(F1); + writePinHigh(F0); + writePinHigh(F5); + break; + case 5: + writePinHigh(F4); + writePinHigh(F1); + writePinHigh(F0); + writePinHigh(F5); + break; + case 6: + writePinHigh(F4); + writePinHigh(F1); + writePinHigh(F0); + writePinHigh(F6); + break; + case 7: + writePinLow(F4); + writePinLow(F1); + writePinLow(F0); + writePinHigh(F6); + break; + case 8: + writePinLow(F4); + writePinLow(F1); + writePinHigh(F0); + writePinHigh(F6); + break; + case 9: + writePinLow(F4); + writePinHigh(F1); + writePinLow(F0); + writePinHigh(F6); + break; + case 10: + writePinLow(F4); + writePinHigh(F1); + writePinHigh(F0); + writePinHigh(F6); + break; + case 11: + writePinHigh(F4); + writePinLow(F1); + writePinLow(F0); + writePinHigh(F6); + break; + case 12: + writePinHigh(F4); + writePinLow(F1); + writePinHigh(F0); + writePinHigh(F6); + break; + case 13: + writePinHigh(F4); + writePinHigh(F1); + writePinLow(F0); + writePinHigh(F6); + break; + case 14: + writePinLow(F4); + writePinLow(F1); + writePinLow(F0); + writePinHigh(F5); + break; + } +} + +static void unselect_col(uint8_t col) { + switch (col) { + case 0: + writePinHigh(F4); + writePinHigh(F1); + writePinLow(F0); + writePinLow(F5); + break; + case 1: + writePinHigh(F4); + writePinLow(F1); + writePinHigh(F0); + writePinLow(F5); + break; + case 2: + writePinHigh(F4); + writePinLow(F1); + writePinLow(F0); + writePinLow(F5); + break; + case 3: + writePinLow(F4); + writePinHigh(F1); + writePinHigh(F0); + writePinLow(F5); + break; + case 4: + writePinLow(F4); + writePinHigh(F1); + writePinLow(F0); + writePinLow(F5); + break; + case 5: + writePinLow(F4); + writePinLow(F1); + writePinLow(F0); + writePinLow(F5); + break; + case 6: + writePinLow(F4); + writePinLow(F1); + writePinLow(F0); + writePinLow(F6); + break; + case 7: + writePinHigh(F4); + writePinHigh(F1); + writePinHigh(F0); + writePinLow(F6); + break; + case 8: + writePinHigh(F4); + writePinHigh(F1); + writePinLow(F0); + writePinLow(F6); + break; + case 9: + writePinHigh(F4); + writePinLow(F1); + writePinHigh(F0); + writePinLow(F6); + break; + case 10: + writePinHigh(F4); + writePinLow(F1); + writePinLow(F0); + writePinLow(F6); + break; + case 11: + writePinLow(F4); + writePinHigh(F1); + writePinHigh(F0); + writePinLow(F6); + break; + case 12: + writePinLow(F4); + writePinHigh(F1); + writePinLow(F0); + writePinLow(F6); + break; + case 13: + writePinLow(F4); + writePinLow(F1); + writePinHigh(F0); + writePinLow(F6); + break; + case 14: + writePinHigh(F4); + writePinHigh(F1); + writePinHigh(F0); + writePinLow(F5); + break; + } +} + +static void unselect_cols(void) { + + //Demultiplexer + writePinHigh(F0); + writePinHigh(F1); + writePinHigh(F4); + writePinLow(F5); + writePinLow(F6); +} + +static void init_pins(void) { + unselect_cols(); + for (uint8_t x = 0; x < MATRIX_ROWS; x++) { + setPinInputHigh(row_pins[x]); + } + setPinOutput(F0); + setPinOutput(F1); + setPinOutput(F4); + setPinOutput(F5); + setPinOutput(F6); +} + +static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) { + bool matrix_changed = false; + + // Select col and wait for col selecton to stabilize + select_col(current_col); + wait_us(30); + + // For each row... + for (uint8_t row_index = 0; row_index < MATRIX_ROWS; row_index++) { + // Store last value of row prior to reading + matrix_row_t last_row_value = current_matrix[row_index]; + + // Check row pin state + if (readPin(row_pins[row_index]) == 0) { + // Pin LO, set col bit + current_matrix[row_index] |= (MATRIX_ROW_SHIFTER << current_col); + } else { + // Pin HI, clear col bit + current_matrix[row_index] &= ~(MATRIX_ROW_SHIFTER << current_col); + } + + // Determine if the matrix changed state + if ((last_row_value != current_matrix[row_index]) && !(matrix_changed)) { + matrix_changed = true; + } + } + + // Unselect col + unselect_col(current_col); + + return matrix_changed; +} + +#endif + +void matrix_init_custom(void) { + // initialize key pins + init_pins(); +} + +bool matrix_scan_custom(matrix_row_t current_matrix[]) { + bool changed = false; + +#if defined(DIRECT_PINS) || (DIODE_DIRECTION == ROW2COL) + // Set col, read rows + for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { + changed |= read_rows_on_col(current_matrix, current_col); + } +#endif + + return changed; +} diff --git a/keyboards/mechlovin/adelais/standard_led/avr/rev1/readme.md b/keyboards/mechlovin/adelais/standard_led/avr/rev1/readme.md new file mode 100644 index 0000000000..9d7d7dbf20 --- /dev/null +++ b/keyboards/mechlovin/adelais/standard_led/avr/rev1/readme.md @@ -0,0 +1,16 @@ +# Adelais AVR rev. 1 + +![adelais](https://i.imgur.com/6U1IfZe.png) + +Compatible with TGR Alice and all clone variants. +`standard_led` (Adelais) comes with backlight and RGB underglow LEDs pre-soldered. Adelais rev.5 support 3 rotary encoder, USB TypeC both side and reset button. + +* Keyboard Maintainer: [Team Mechlovin'](mechlovin.studio) +* Hardware Supported: Adelais +* Hardware Availability: [Mechlovin.studio](https://mechlovin.studio/collections/pcb/products/adelais-tgr-alice-clones-compatible-pcb?variant=34140335472779) + +Make example for this keyboard (after setting up your build environment): + + make mechlovin/adelais/standard_led/avr/rev1:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/mechlovin/adelais/standard_led/avr/rev1/rev1.h b/keyboards/mechlovin/adelais/standard_led/avr/rev1/rev1.h new file mode 100644 index 0000000000..392a6cd375 --- /dev/null +++ b/keyboards/mechlovin/adelais/standard_led/avr/rev1/rev1.h @@ -0,0 +1,48 @@ +/* Copyright 2020 Team Mechlovin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" +#define LAYOUT_alice_split_bs( \ + K1E, K00, K01, K02, K03, K04, K05, K06, K07,K08,K09, K0A, K0B, K0C, K0D, K0E,\ + K2E, K10, K11, K12, K13, K14, K15, K16,K17,K18, K19, K1A, K1B, K1C, K1D,\ + K3E, K20, K21, K22, K23, K24, K25, K26,K27,K28, K29, K2A, K2B, K2D,\ + K30, K32, K33, K34, K35, K36, K37,K38,K39, K3A, K3B, K4C, K3C, K3D,\ + K40, K42, K44, K46, K48, K4A, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, K2E }, \ + { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, KC_NO, K42, KC_NO, K44, KC_NO, K46, KC_NO, K48, KC_NO, K4A, KC_NO, K4C, K4D, KC_NO }, \ +} + +#define LAYOUT_alice( \ + K1E, K00, K01, K02, K03, K04, K05, K06, K07,K08,K09, K0A, K0B, K0C, K0D,\ + K2E, K10, K11, K12, K13, K14, K15, K16,K17,K18, K19, K1A, K1B, K1C, K1D,\ + K3E, K20, K21, K22, K23, K24, K25, K26,K27,K28, K29, K2A, K2B, K2D,\ + K30, K32, K33, K34, K35, K36, K37,K38,K39, K3A, K3B, K4C, K3C, K3D,\ + K40, K42, K44, K46, K48, K4A, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, KC_NO }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, K2E }, \ + { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, KC_NO, K42, KC_NO, K44, KC_NO, K46, KC_NO, K48, KC_NO, K4A, KC_NO, K4C, K4D, KC_NO }, \ +} + +#define LAYOUT_all LAYOUT_alice_split_bs diff --git a/keyboards/mechlovin/adelais/standard_led/avr/rev1/rules.mk b/keyboards/mechlovin/adelais/standard_led/avr/rev1/rules.mk new file mode 100644 index 0000000000..0bba0b6eaf --- /dev/null +++ b/keyboards/mechlovin/adelais/standard_led/avr/rev1/rules.mk @@ -0,0 +1,13 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +CUSTOM_MATRIX = lite + +SRC += matrix.c diff --git a/keyboards/mechlovin/adelais/standard_led/avr/rules.mk b/keyboards/mechlovin/adelais/standard_led/avr/rules.mk new file mode 100644 index 0000000000..f33198890d --- /dev/null +++ b/keyboards/mechlovin/adelais/standard_led/avr/rules.mk @@ -0,0 +1,2 @@ + +DEFAULT_FOLDER = mechlovin/adelais/standard_led/avr/rev1 \ No newline at end of file diff --git a/keyboards/mechlovin/adelais/standard_led/rules.mk b/keyboards/mechlovin/adelais/standard_led/rules.mk index b4523dbf37..b3c522ca06 100644 --- a/keyboards/mechlovin/adelais/standard_led/rules.mk +++ b/keyboards/mechlovin/adelais/standard_led/rules.mk @@ -1,3 +1,5 @@ -RGBLIGHT_ENABLE = yes -WS2812_DRIVER = spi -DEFAULT_FOLDER = mechlovin/adelais/standard_led/rev2 \ No newline at end of file + +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +DEFAULT_FOLDER = mechlovin/adelais/standard_led/arm/rev2 From c6f92e37aad673e9f6bc7694d5f8829bbb8b87de Mon Sep 17 00:00:00 2001 From: phrygiandesign <77276236+phrygiandesign@users.noreply.github.com> Date: Fri, 24 Sep 2021 17:25:33 +1000 Subject: [PATCH 102/595] [Keyboard] Add phrygian design ph100 (#13738) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- keyboards/phrygian/ph100/chconf.h | 61 ++++++++++ keyboards/phrygian/ph100/config.h | 43 +++++++ keyboards/phrygian/ph100/halconf.h | 37 ++++++ keyboards/phrygian/ph100/info.json | 111 ++++++++++++++++++ .../phrygian/ph100/keymaps/default/keymap.c | 27 +++++ keyboards/phrygian/ph100/ph100.c | 19 +++ keyboards/phrygian/ph100/ph100.h | 44 +++++++ keyboards/phrygian/ph100/readme.md | 20 ++++ keyboards/phrygian/ph100/rules.mk | 25 ++++ 9 files changed, 387 insertions(+) create mode 100644 keyboards/phrygian/ph100/chconf.h create mode 100644 keyboards/phrygian/ph100/config.h create mode 100644 keyboards/phrygian/ph100/halconf.h create mode 100644 keyboards/phrygian/ph100/info.json create mode 100644 keyboards/phrygian/ph100/keymaps/default/keymap.c create mode 100644 keyboards/phrygian/ph100/ph100.c create mode 100644 keyboards/phrygian/ph100/ph100.h create mode 100644 keyboards/phrygian/ph100/readme.md create mode 100644 keyboards/phrygian/ph100/rules.mk diff --git a/keyboards/phrygian/ph100/chconf.h b/keyboards/phrygian/ph100/chconf.h new file mode 100644 index 0000000000..1c9cc32364 --- /dev/null +++ b/keyboards/phrygian/ph100/chconf.h @@ -0,0 +1,61 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +/* + * This file was auto-generated by: + * `qmk chibios-confmigrate -i keyboards/phrygian/ph100/chconf.h -r platforms/chibios/common/configs/chconf.h` + */ + +#pragma once + +#define CH_CFG_ST_FREQUENCY 10000 + +#define CH_CFG_USE_REGISTRY TRUE + +#define CH_CFG_USE_WAITEXIT TRUE + +#define CH_CFG_USE_CONDVARS TRUE + +#define CH_CFG_USE_MESSAGES TRUE + +#define CH_CFG_USE_MAILBOXES TRUE + +#define CH_CFG_USE_HEAP TRUE + +#define CH_CFG_USE_MEMPOOLS TRUE + +#define CH_CFG_USE_OBJ_FIFOS TRUE + +#define CH_CFG_USE_PIPES TRUE + +#define CH_CFG_USE_DYNAMIC TRUE + +#define CH_CFG_USE_FACTORY TRUE + +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE + +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE + +#define CH_CFG_FACTORY_SEMAPHORES TRUE + +#define CH_CFG_FACTORY_MAILBOXES TRUE + +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE + +#define CH_CFG_FACTORY_PIPES TRUE + +#include_next + diff --git a/keyboards/phrygian/ph100/config.h b/keyboards/phrygian/ph100/config.h new file mode 100644 index 0000000000..68bd430736 --- /dev/null +++ b/keyboards/phrygian/ph100/config.h @@ -0,0 +1,43 @@ +/* Copyright 2021 Phrygian Design + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x0C61 +#define DEVICE_VER 0x0100 +#define MANUFACTURER PhrygianDesign +#define PRODUCT ph100 + +/* key matrix size */ +#define MATRIX_ROWS 10 +#define MATRIX_COLS 10 + +#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7, B8, B9 } +#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, A8, A9 } + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Define capslock and numlock */ +#define LED_NUM_LOCK_PIN B14 +#define LED_CAPS_LOCK_PIN B15 + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 10 diff --git a/keyboards/phrygian/ph100/halconf.h b/keyboards/phrygian/ph100/halconf.h new file mode 100644 index 0000000000..f6be8c0ff3 --- /dev/null +++ b/keyboards/phrygian/ph100/halconf.h @@ -0,0 +1,37 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +/* + * This file was auto-generated by: + * `qmk chibios-confmigrate -i keyboards/phrygian/ph100/halconf.h -r platforms/chibios/common/configs/halconf.h` + */ + +#pragma once + +#define HAL_USE_SERIAL_USB TRUE + +#define ADC_USE_WAIT FALSE + +#define ADC_USE_MUTUAL_EXCLUSION FALSE + +#define SERIAL_USB_BUFFERS_SIZE 256 + +#define SPI_USE_WAIT FALSE + +#define SPI_USE_MUTUAL_EXCLUSION FALSE + +#include_next + diff --git a/keyboards/phrygian/ph100/info.json b/keyboards/phrygian/ph100/info.json new file mode 100644 index 0000000000..054e3955e0 --- /dev/null +++ b/keyboards/phrygian/ph100/info.json @@ -0,0 +1,111 @@ +{ + "keyboard_name": "ph100", + "url": "https://phrygiandesign.com/products/ph100-mechanical-keyboard", + "maintainer": "phrygiandesign", + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"ESCAPE", "x":0, "y":0}, + {"label":"F1", "x":2, "y":0}, + {"label":"F2", "x":3, "y":0}, + {"label":"F3", "x":4, "y":0}, + {"label":"F4", "x":5, "y":0}, + {"label":"F5", "x":6.5, "y":0}, + {"label":"F6", "x":7.5, "y":0}, + {"label":"F7", "x":8.5, "y":0}, + {"label":"F8", "x":9.5, "y":0}, + {"label":"F9", "x":11, "y":0}, + {"label":"F10", "x":12, "y":0}, + {"label":"F11", "x":13, "y":0}, + {"label":"F12", "x":14, "y":0}, + {"label":"HOME", "x":15.25, "y":0}, + {"label":"PRINT SCREEN", "x":16.25, "y":0}, + {"label":"BACKTICK", "x":0, "y":1}, + {"label":"1", "x":1, "y":1}, + {"label":"2", "x":2, "y":1}, + {"label":"3", "x":3, "y":1}, + {"label":"4", "x":4, "y":1}, + {"label":"5", "x":5, "y":1}, + {"label":"6", "x":6, "y":1}, + {"label":"7", "x":7, "y":1}, + {"label":"8", "x":8, "y":1}, + {"label":"9", "x":9, "y":1}, + {"label":"0", "x":10, "y":1}, + {"label":"MINUS", "x":11, "y":1}, + {"label":"EQUALS", "x":12, "y":1}, + {"label":"BACKSPACE", "x":13, "y":1, "w":2}, + {"label":"END", "x":15.25, "y":1}, + {"label":"PAGE UP", "x":16.25, "y":1}, + {"label":"NUM LOCK", "x":17.5, "y":1}, + {"label":"/", "x":18.5, "y":1}, + {"label":"*", "x":19.5, "y":1}, + {"label":"-", "x":20.5, "y":1}, + {"label":"TAB", "x":0, "y":2, "w":1.5}, + {"label":"Q", "x":1.5, "y":2}, + {"label":"W", "x":2.5, "y":2}, + {"label":"E", "x":3.5, "y":2}, + {"label":"R", "x":4.5, "y":2}, + {"label":"T", "x":5.5, "y":2}, + {"label":"Y", "x":6.5, "y":2}, + {"label":"U", "x":7.5, "y":2}, + {"label":"I", "x":8.5, "y":2}, + {"label":"O", "x":9.5, "y":2}, + {"label":"P", "x":10.5, "y":2}, + {"label":"LEFT BRACKET", "x":11.5, "y":2}, + {"label":"RIGHT BRACKET", "x":12.5, "y":2}, + {"label":"BACK SLASH", "x":13.5, "y":2, "w":1.5}, + {"label":"DELETE", "x":15.25, "y":2}, + {"label":"PAGE DOWN", "x":16.25, "y":2}, + {"label":"7", "x":17.5, "y":2}, + {"label":"8", "x":18.5, "y":2}, + {"label":"9", "x":19.5, "y":2}, + {"label":"+", "x":20.5, "y":2, "h":2}, + {"label":"CAPS LOCK", "x":0, "y":3, "w":1.75}, + {"label":"A", "x":1.75, "y":3}, + {"label":"S", "x":2.75, "y":3}, + {"label":"D", "x":3.75, "y":3}, + {"label":"F", "x":4.75, "y":3}, + {"label":"G", "x":5.75, "y":3}, + {"label":"H", "x":6.75, "y":3}, + {"label":"J", "x":7.75, "y":3}, + {"label":"K", "x":8.75, "y":3}, + {"label":"L", "x":9.75, "y":3}, + {"label":"SEMICOLON", "x":10.75, "y":3}, + {"label":"SINGLE TICK", "x":11.75, "y":3}, + {"label":"ENTER", "x":12.75, "y":3, "w":2.25}, + {"label":"4", "x":17.5, "y":3}, + {"label":"5", "x":18.5, "y":3}, + {"label":"6", "x":19.5, "y":3}, + {"label":"LEFT SHIFT", "x":0, "y":4, "w":2.25}, + {"label":"Z", "x":2.25, "y":4}, + {"label":"X", "x":3.25, "y":4}, + {"label":"C", "x":4.25, "y":4}, + {"label":"V", "x":5.25, "y":4}, + {"label":"B", "x":6.25, "y":4}, + {"label":"N", "x":7.25, "y":4}, + {"label":"M", "x":8.25, "y":4}, + {"label":"COMMA", "x":9.25, "y":4}, + {"label":"PERIOD", "x":10.25, "y":4}, + {"label":"FORWARD SLASH", "x":11.25, "y":4}, + {"label":"RIGHT SHIFT", "x":12.25, "y":4, "w":2.25}, + {"label":"UP ARROW", "x":15.25, "y":4}, + {"label":"1", "x":17.5, "y":4}, + {"label":"2", "x":18.5, "y":4}, + {"label":"3", "x":19.5, "y":4}, + {"label":"ENTER", "x":20.5, "y":4, "h":2}, + {"label":"LEFT CTRL", "x":0, "y":5, "w":1.25}, + {"label":"LEFT WIN", "x":1.25, "y":5, "w":1.25}, + {"label":"LEFT ALT", "x":2.5, "y":5, "w":1.25}, + {"label":"SPACEBAR", "x":3.75, "y":5, "w":6.25}, + {"label":"RIGHT ALT", "x":10, "y":5, "w":1.25}, + {"label":"RIGHT CTRL", "x":11.25, "y":5, "w":1.25}, + {"label":"FN", "x":12.5, "y":5}, + {"label":"LEFT ARROW", "x":14.25, "y":5}, + {"label":"DOWN ARROW", "x":15.25, "y":5}, + {"label":"RIGHT ARROW", "x":16.25, "y":5}, + {"label":"0", "x":17.5, "y":5, "w":2}, + {"label":".", "x":19.5, "y":5} + ] + } + } +} diff --git a/keyboards/phrygian/ph100/keymaps/default/keymap.c b/keyboards/phrygian/ph100/keymaps/default/keymap.c new file mode 100644 index 0000000000..0350aec538 --- /dev/null +++ b/keyboards/phrygian/ph100/keymaps/default/keymap.c @@ -0,0 +1,27 @@ +/* Copyright 2021 Phrygian Design + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_PGUP, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_PGDN, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_HOME, KC_END, KC_P7, KC_P8, KC_P9, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_APP, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT) +}; \ No newline at end of file diff --git a/keyboards/phrygian/ph100/ph100.c b/keyboards/phrygian/ph100/ph100.c new file mode 100644 index 0000000000..45c2426961 --- /dev/null +++ b/keyboards/phrygian/ph100/ph100.c @@ -0,0 +1,19 @@ +/* Copyright 2021 Phrygian Design + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "ph100.h" + +//Put software here \ No newline at end of file diff --git a/keyboards/phrygian/ph100/ph100.h b/keyboards/phrygian/ph100/ph100.h new file mode 100644 index 0000000000..bd18bfd190 --- /dev/null +++ b/keyboards/phrygian/ph100/ph100.h @@ -0,0 +1,44 @@ +/* Copyright 2021 Phrygian Design + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#define XXX KC_NO + +#include "quantum.h" + +// This a shortcut to help you visually see your layout. + +#define LAYOUT(\ + K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K61, K62, K63, K64, K65, \ + K11, K12, K13, K14, K15, K16, K17, K18, K19, K20, K71, K72, K73, K74, K75, K76, K66, K67, K68, K69, \ + K21, K22, K23, K24, K25, K26, K27, K28, K29, K30, K81, K82, K83, K84, K85, K86, K77, K78, K79, \ + K31, K32, K33, K34, K35, K36, K37, K38, K39, K40, K91, K93, K95, K87, K88, K80, K70, \ + K41, K42, K43, K44, K45, K46, K47, K48, K49, K50, K92, K94, K96, K97, K89, K90, \ + K51, K52, K53, K54, K55, K56, K57, K58, K59, K60, K98, K99, K100\ +){ \ + { K01, K02, K03, K04, K05, K06, K07, K08, K09, K10 }, \ + { K11, K12, K13, K14, K15, K16, K17, K18, K19, K20 }, \ + { K21, K22, K23, K24, K25, K26, K27, K28, K29, K30 }, \ + { K31, K32, K33, K34, K35, K36, K37, K38, K39, K40 }, \ + { K41, K42, K43, K44, K45, K46, K47, K48, K49, K50 }, \ + { K51, K52, K53, K54, K55, K56, K57, K58, K59, K60 }, \ + { K61, K62, K63, K64, K65, K66, K67, K68, K69, K70 }, \ + { K71, K72, K73, K74, K75, K76, K77, K78, K79, K80 }, \ + { K81, K82, K83, K84, K85, K86, K87, K88, K89, K90 }, \ + { K91, K92, K93, K94, K95, K96, K97, K98, K99, K100 }, \ +} + diff --git a/keyboards/phrygian/ph100/readme.md b/keyboards/phrygian/ph100/readme.md new file mode 100644 index 0000000000..f6419880e6 --- /dev/null +++ b/keyboards/phrygian/ph100/readme.md @@ -0,0 +1,20 @@ +## Phrygian Design ph100 + +![ph100](https://cdn.shopify.com/s/files/1/0470/8814/0443/products/DSCF0064_1080x.png) + +The ph100 is a 100-key modular keyboard from Phrygian Design. + +* Keyboard Maintainer: https://github.com/phrygiandesign +* Hardware Supported: ph100 PCB +* Hardware Availability: https://phrygiandesign.com/products/ph100-mechanical-keyboard +* Keyboard support: contact@phrygiandesign.com + +Make example for this keyboard: + + make phrygian/ph100:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +#### Note: Booting into the STM32 USB Bootloader +The STM32F042 range of microcontrollers have problems with entering into the USB bootloader with QMK's bootloader key sequence. +To boot into the bootloader, apply power to the keyboard while holding down "SW0" on the bottom of PCB near the USB port. diff --git a/keyboards/phrygian/ph100/rules.mk b/keyboards/phrygian/ph100/rules.mk new file mode 100644 index 0000000000..ca4c47452f --- /dev/null +++ b/keyboards/phrygian/ph100/rules.mk @@ -0,0 +1,25 @@ +# MCU name +MCU = STM32F042 + +# Bootloader selection +BOOTLOADER = stm32-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output + + +# Enter lower-power sleep mode when on the ChibiOS idle thread +OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE From 77bb907feeb17f5a97544276d8a2e1b9cb512038 Mon Sep 17 00:00:00 2001 From: Albert Engelbrecht Date: Fri, 24 Sep 2021 02:30:52 -0500 Subject: [PATCH 103/595] [Keyboard] Added A. Dux keyboard configurations (#14320) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- keyboards/a_dux/a_dux.c | 16 +++ keyboards/a_dux/a_dux.h | 47 +++++++ keyboards/a_dux/config.h | 76 ++++++++++++ keyboards/a_dux/info.json | 52 ++++++++ keyboards/a_dux/keymaps/default/config.h | 39 ++++++ keyboards/a_dux/keymaps/default/keymap.json | 106 ++++++++++++++++ keyboards/a_dux/keymaps/default/readme.md | 122 ++++++++++++++++++ keyboards/a_dux/keymaps/jcmkk3/keymap.c | 130 ++++++++++++++++++++ keyboards/a_dux/keymaps/jcmkk3/oneshot.c | 72 +++++++++++ keyboards/a_dux/keymaps/jcmkk3/oneshot.h | 46 +++++++ keyboards/a_dux/keymaps/jcmkk3/rules.mk | 1 + keyboards/a_dux/readme.md | 38 ++++++ keyboards/a_dux/rules.mk | 23 ++++ 13 files changed, 768 insertions(+) create mode 100644 keyboards/a_dux/a_dux.c create mode 100644 keyboards/a_dux/a_dux.h create mode 100644 keyboards/a_dux/config.h create mode 100644 keyboards/a_dux/info.json create mode 100644 keyboards/a_dux/keymaps/default/config.h create mode 100644 keyboards/a_dux/keymaps/default/keymap.json create mode 100644 keyboards/a_dux/keymaps/default/readme.md create mode 100644 keyboards/a_dux/keymaps/jcmkk3/keymap.c create mode 100644 keyboards/a_dux/keymaps/jcmkk3/oneshot.c create mode 100644 keyboards/a_dux/keymaps/jcmkk3/oneshot.h create mode 100644 keyboards/a_dux/keymaps/jcmkk3/rules.mk create mode 100644 keyboards/a_dux/readme.md create mode 100644 keyboards/a_dux/rules.mk diff --git a/keyboards/a_dux/a_dux.c b/keyboards/a_dux/a_dux.c new file mode 100644 index 0000000000..69eae44285 --- /dev/null +++ b/keyboards/a_dux/a_dux.c @@ -0,0 +1,16 @@ +/* Copyright 2018-2020 ENDO Katsuhiro David Philip Barr <@davidphilipbarr> Pierre Chevalier + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "a_dux.h" diff --git a/keyboards/a_dux/a_dux.h b/keyboards/a_dux/a_dux.h new file mode 100644 index 0000000000..1edea40332 --- /dev/null +++ b/keyboards/a_dux/a_dux.h @@ -0,0 +1,47 @@ +/* Copyright 2018-2020 ENDO Katsuhiro David Philip Barr <@davidphilipbarr> Pierre Chevalier + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "quantum.h" + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ + +// readability +#define ___ KC_NO + +#define LAYOUT( \ + L01, L02, L03, L04, L05, R01, R02, R03, R04, R05, \ + L06, L07, L08, L09, L10, R06, R07, R08, R09, R10, \ + L11, L12, L13, L14, L15, R11, R12, R13, R14, R15, \ + L16, L17, R16, R17 \ + ) \ + { \ + { L01, L02, L03, L04, L05 }, \ + { L06, L07, L08, L09, L10 }, \ + { L11, L12, L13, L14, L15 }, \ + { L16, L17, ___, ___ , ___}, \ + { R01, R02, R03, R04, R05 }, \ + { R06, R07, R08, R09, R10 }, \ + { R11, R12, R13, R14, R15 }, \ + { R16, R17, ___, ___, ___ } \ + } + diff --git a/keyboards/a_dux/config.h b/keyboards/a_dux/config.h new file mode 100644 index 0000000000..bacc4f14c1 --- /dev/null +++ b/keyboards/a_dux/config.h @@ -0,0 +1,76 @@ +/* Copyright 2018-2020 ENDO Katsuhiro David Philip Barr <@davidphilipbarr> Pierre Chevalier + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xC2AB +#define PRODUCT_ID 0x3939 +#define DEVICE_VER 0x0001 +#define MANUFACTURER tapioki +#define PRODUCT Architeuthis dux + +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 5 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * NO_DIODE = switches are directly connected to AVR pins + * +*/ +#define DIRECT_PINS { \ + { C6, D2, F7, B2, F4 }, \ + { D7, D0, F6, B3, F5 }, \ + { E6, D4, D3, B1, B6 }, \ + { B4, B5, NO_PIN, NO_PIN, NO_PIN } \ +} + +#define DIRECT_PINS_RIGHT { \ + { F4, B2, F7, D2, C6 }, \ + { F5, B3, F6, D0, D7 }, \ + { B6, B1, D3, D4, E6 }, \ + { B5, B4, NO_PIN, NO_PIN, NO_PIN } \ +} + + + +#define UNUSED_PINS + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* Serial settings */ +#define USE_SERIAL + +/* serial.c configuration for split keyboard */ +#define SOFT_SERIAL_PIN D1 + +#define EE_HANDS diff --git a/keyboards/a_dux/info.json b/keyboards/a_dux/info.json new file mode 100644 index 0000000000..e52895a58f --- /dev/null +++ b/keyboards/a_dux/info.json @@ -0,0 +1,52 @@ +{ + "keyboard_name": "Architeuthis dux", + "url": "https://github.com/tapioki/cephalopoda", + "maintainer": "@tapioki", + "layouts": { + "LAYOUT": { + "layout": [ + {"x": 0, "y": 0.93}, + {"x": 1, "y": 0.31}, + {"x": 2, "y": 0}, + {"x": 3, "y": 0.28}, + {"x": 4, "y": 0.42}, + + {"x": 7, "y": 0.42}, + {"x": 8, "y": 0.28}, + {"x": 9, "y": 0}, + {"x": 10, "y": 0.31}, + {"x": 11, "y": 0.93}, + + {"x": 0, "y": 1.93}, + {"x": 1, "y": 1.31}, + {"x": 2, "y": 1}, + {"x": 3, "y": 1.28}, + {"x": 4, "y": 1.42}, + + {"x": 7, "y": 1.42}, + {"x": 8, "y": 1.28}, + {"x": 9, "y": 1}, + {"x": 10, "y": 1.31}, + {"x": 11, "y": 1.93}, + + {"x": 0, "y": 2.93}, + {"x": 1, "y": 2.31}, + {"x": 2, "y": 2}, + {"x": 3, "y": 2.28}, + {"x": 4, "y": 2.42}, + + {"x": 7, "y": 2.42}, + {"x": 8, "y": 2.28}, + {"x": 9, "y": 2}, + {"x": 10, "y": 2.31}, + {"x": 11, "y": 2.93}, + + {"x": 3.5, "y": 3.75}, + {"x": 4.5, "y": 4}, + + {"x": 6.5, "y": 4}, + {"x": 7.5, "y": 3.75} + ] + } + } +} diff --git a/keyboards/a_dux/keymaps/default/config.h b/keyboards/a_dux/keymaps/default/config.h new file mode 100644 index 0000000000..cf0fb7478e --- /dev/null +++ b/keyboards/a_dux/keymaps/default/config.h @@ -0,0 +1,39 @@ +/* +Copyright 2020 Pierre Chevalier + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once +// Set the mouse settings to a comfortable speed/accuracy trade-off, +// assuming a screen refresh rate of 60 Htz or higher +// The default is 50. This makes the mouse ~3 times faster and more accurate +#define MOUSEKEY_INTERVAL 16 +// The default is 20. Since we made the mouse about 3 times faster with the previous setting, +// give it more time to accelerate to max speed to retain precise control over short distances. +#define MOUSEKEY_TIME_TO_MAX 40 +// The default is 300. Let's try and make this as low as possible while keeping the cursor responsive +#define MOUSEKEY_DELAY 100 +// It makes sense to use the same delay for the mouseweel +#define MOUSEKEY_WHEEL_DELAY 100 +// The default is 100 +#define MOUSEKEY_WHEEL_INTERVAL 50 +// The default is 40 +#define MOUSEKEY_WHEEL_TIME_TO_MAX 100 + +// Pick good defaults for enabling homerow modifiers +#define TAPPING_TERM 200 +#define PERMISSIVE_HOLD +#define IGNORE_MOD_TAP_INTERRUPT +#define TAPPING_FORCE_HOLD diff --git a/keyboards/a_dux/keymaps/default/keymap.json b/keyboards/a_dux/keymaps/default/keymap.json new file mode 100644 index 0000000000..555a86c0b0 --- /dev/null +++ b/keyboards/a_dux/keymaps/default/keymap.json @@ -0,0 +1,106 @@ +{ "version": 1, + "notes": "My awesome keymap", + "documentation": "\"This file is a QMK Configurator export. You can import this at . It can also be used directly with QMK's source code.\n\nTo setup your QMK environment check out the tutorial: \n\nYou can convert this file to a keymap.c using this command: `qmk json2c {keymap}`\n\nYou can compile this keymap using this command: `qmk compile {keymap}`\"\n", + "keyboard": "a_dux", + "keymap": "default", + "layout": "LAYOUT", + "layers": [ + ["KC_Q" , "KC_W" , "KC_E" , "KC_R" , "KC_T", + "KC_Y" , "KC_U" , "KC_I" , "KC_O" , "KC_P", + + "LSFT_T(KC_A)", "LT(5,KC_S)" , "LT(1,KC_D)" , "LT(3,KC_F)" , "KC_G", + "KC_H" , "LT(4,KC_J)" , "LT(2,KC_K)" , "LT(6,KC_L)" , "LSFT_T(KC_SCLN)", + + "KC_Z" , "LCTL_T(KC_X)", "LALT_T(KC_C)" , "KC_V" , "KC_B", + "KC_N" , "KC_M" , "LALT_T(KC_COMM)", "LCTL_T(KC_DOT)", "KC_SLSH", + + "KC_P0" , "KC_BSPC", + "LT(7,KC_SPC)", "KC_P1" + ], + ["KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS", + "KC_TRNS" , "KC_BTN1" , "KC_WH_U" , "KC_BTN2" , "KC_TRNS", + + "KC_TRNS" , "KC_BTN2" , "KC_NO" , "KC_BTN1" , "KC_TRNS", + "KC_TRNS" , "KC_MS_L" , "KC_MS_D" , "KC_MS_U" , "KC_MS_R", + + "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS", + "KC_TRNS" , "KC_WH_L" , "KC_WH_D" , "KC_WH_R" , "KC_TRNS", + + "KC_TRNS" , "KC_TRNS", + "KC_TRNS" , "KC_TRNS" + ], + ["KC_TRNS" , "KC_TRNS" , "KC_PGUP" , "KC_TRNS" , "KC_TRNS", + "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS", + + "KC_LEFT" , "KC_UP" , "KC_DOWN" , "KC_RGHT" , "KC_TRNS", + "KC_TRNS" , "KC_LGUI" , "KC_NO" , "LCTL(KC_LALT)" , "LCA(KC_LSFT)", + + "KC_TRNS" , "KC_HOME" , "KC_PGDN" , "KC_END" , "KC_TRNS", + "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS", + + "KC_TRNS" , "KC_TRNS", + "KC_TRNS" , "KC_TRNS" + ], + ["KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS", + "KC_TRNS" , "KC_UNDS" , "KC_PIPE" , "KC_QUOT" , "KC_TRNS", + + "KC_CIRC" , "KC_ASTR" , "KC_AMPR" , "KC_NO" , "KC_TRNS", + "KC_HASH" , "KC_TILD" , "KC_SLSH" , "KC_DQUO" , "KC_DLR", + + "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS", + "KC_TRNS" , "KC_MINS" , "KC_BSLS" , "KC_GRV" , "KC_TRNS", + + "KC_TRNS" , "KC_TRNS", + "KC_TRNS" , "KC_TRNS" + ], + ["KC_TRNS" , "KC_COLN" , "KC_LT" , "KC_GT" , "KC_SCLN", + "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS", + + "KC_LCBR" , "KC_RCBR" , "KC_LPRN" , "KC_RPRN" , "KC_AT", + "KC_TRNS" , "KC_NO" , "KC_EQL" , "KC_PLUS" , "KC_PERC", + + "KC_TRNS" , "KC_EXLM" , "KC_LBRC" , "KC_RBRC" , "KC_TRNS", + "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS", + + "KC_VOLD" , "KC_TRNS", + "KC_TRNS" , "KC_VOLU" + ], + ["KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS", + "KC_TRNS" , "KC_F7" , "KC_F8" , "KC_F9" , "KC_F10", + + "KC_TRNS" , "KC_NO" , "LCTL(KC_LALT)" , "KC_TRNS" , "KC_TRNS", + "KC_TRNS" , "KC_F4" , "KC_F5" , "KC_F6" , "KC_F11", + + "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS", + "KC_TRNS" , "KC_F1" , "KC_F2" , "KC_F3" , "KC_F12", + + "KC_TRNS" , "KC_TRNS", + "KC_TRNS" , "KC_TRNS" + ], + ["KC_PSLS" , "KC_7" , "KC_8" , "KC_9" , "KC_PPLS", + "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS", + + "KC_0" , "KC_1" , "KC_2" , "KC_3" , "KC_PMNS", + "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_NO" , "KC_TRNS", + + "KC_PAST" , "KC_4" , "KC_5" , "KC_6" , "KC_PEQL", + "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS", + + "KC_TRNS" , "KC_TRNS", + "KC_TRNS" , "KC_TRNS" + ], + ["KC_TRNS" , "KC_TRNS" , "KC_COLN" , "KC_ESC" , "KC_TRNS", + "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_DEL", + + "KC_TRNS" , "KC_PERC" , "KC_SLSH" , "KC_ENT" , "KC_TRNS", + "DF(1)" , "KC_LGUI" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS", + + "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_EXLM" , "KC_TRNS", + "DF(0)" , "KC_TRNS" , "RALT_T(KC_COMM)", "RCTL_T(KC_DOT)", "RESET", + + "KC_TRNS" , "KC_TAB", + "KC_NO" , "KC_TRNS" + ] + ], + "author": "@pierrec83" +} diff --git a/keyboards/a_dux/keymaps/default/readme.md b/keyboards/a_dux/keymaps/default/readme.md new file mode 100644 index 0000000000..5f67a69cb2 --- /dev/null +++ b/keyboards/a_dux/keymaps/default/readme.md @@ -0,0 +1,122 @@ +A usable default keymap for the A. Dux keyboard +=============================================== + +Keymaps in general are quite personal, so it is difficult to come up with a default that will suit every user. + +This keymap makes heavy use of keys behaving differently when tapped and held, so that all the keys one may need remain accessible despite the low number of thumb keys. + +It comes with a number of layers to give access to most of the keys one may need on a keyboard. It is not meant to be the best possible keymap, but rather a good base on which to build a keymap that works for you. + +This is not the only way to make 34 keys a comfortable typing experience, but it is one way to do so. If you don't already know of a better way, this may be as good a starting point as any :) + +Note that this keymap was built from the perspective that it is OK to take a steep learning curve if it results in a keymap that is easier to use in the long run. This means that it may take more effort to learn this keymap than some alternatives. "Easy to use" was assessed against the workflow of the author, so your mileage may vary on some of the details. + +What do all these layers do? +---------------------------- + +### Layer 0: Base layer + +![Layer 0](https://i.imgur.com/HjNHUPL.png) + +On tapping the keys, our base layer is qwerty with space on the right homing thumb and backspace on the left homing thumb. + +In this layer, the non-homing-thumb positions have 0 and 1. I recommend modifying this to some frequently accessed shortcut such as copy/paste, previous/next tab or anything that makes most sense in your own workflow. O and 1 are place-holders and make it easy to troubleshoot that all keys are working properly before soldering in the switches. +The reason I recommend convenience shortcuts instead of more commonly used keys like tab or meta is that unhoming of the thumbs was a frequent source of typos for me when I used more than one thumb key frequently in the context of typing. + +Despite being missing on this layer, "meta", "tab", "esc" and such are accessible from any other layer: see Layer 7. + +The behaviour of some keys differ when held: +* Both homing pinkies behave as shift. +* Both bottom-row ring fingers behave as ctrl. +* Both bottom-row middle fingers behave as alt. + +* The homing left ring finger gives access to the Function keys layer +* The homing right ring finger gives access to the Numbers layer +* The homing left middle finger gives access to the Mouse layer +* The homing right middle finger gives access to the Navigation layer +* The homing left index finger gives access to the Right symbols layer +* The homing right index finger gives access to the Left symbols layer +* The homing right thumb gives access to the Always accessible layer + +### Layer 1: Mouse + +![Layer 1](https://i.imgur.com/0fvTuB9.png) + +Layer 1 is a mouse layer: it can be used one-handed or two-handed. The most common way to use it is two handed, with left and right click on the homerow of the left hand and directions on the homerow of the right hand. +Scrolling is available on the right hand with mid finger up and down for vertical scroll and index and ring finger down for horizontal scroll. +On the right hand, left click and right click are also available with index and ring finger up to allow one handed operation. This can be particularly handy when enabling the mouse layer permanently (no need to hold the left middle finger), which can be done from Layer 7. + +Note that thanks to the transparency, shift, ctrl and alt are all accessible on the left hand while operating the mouse. + +### Layer 2: Navigation + +![Layer 2](https://i.imgur.com/ZquQJRq.png) + +The navigation layer somewhat mirrors the mouse layer. It is accessed by holding the right middle finger and gives access to arrow keys on the left homerow. Page up and down, Home and End mirror the vertical scrolling and horizontal scrolling on the mouse layer. + +On the right hand, in addition to ctrl and alt which are available through transparency, ctrl + alt, ctrl + alt + shift and meta are accessible on the homerow to enable common shortcuts in some window managers. This part is quite workflow dependent, so make sure to adapt it to your own workflow as appropriate. + +### Layer 3: Right symbols + +![Layer 3](https://i.imgur.com/9tLAUqG.png) + +When holding down the left index, one may access about half of the symbols. The pinkies store `^` and `$` symbols that represent begin and end in vim. The left homerow hosts `*` and `&`, symbols which are related in the way that they represent some form of indirection in programming languages such as rust. On the right hand, most symbols used when navigating the command line are stored together, organized by columns of related symbols. + +### Layer 4: Left symbols + +![Layer 4](https://i.imgur.com/CkjUSW6.png) + +When holding down the right index, one may access the other symbols. On the left hand, most of the different brackets are laid out. The most frequent ones (round brackets and curly brackets) get a spot on the homerow. The rest of the layer hosts the remaining symbols that are easier to access here than on any other layers. + +### Layer 5: Function keys + +![Layer 5](https://i.imgur.com/fWgVqc4.png) + +By holding down the left ring finger, one may access the function keys, roughly in a numpad layout. +This means that alt+F4 is easy to type, with F4 being on the homerow. +There is a shortcut for ctrl+alt on the left hand to enable convenient switching between virtual terminals on Linux. + +### Layer 6: Numbers + +![Layer 6](https://i.imgur.com/S8gq9Kj.png) + +The number layer is accessed by holding the right ring finger. It hosts the numbers and some duplicated symbols that are commonly accessed next to numbers, such as mathematical operators. +The number are layed out similarly to a numpad, but with the middle row and the homerow swapped so that the most used numbers: 0, 1, 2 and 3 are all available in homing positions. + +### Layer 7: Always accessible + +![Layer 7](https://i.imgur.com/twqBeBb.png) + +Layer 7 is accessed by holding the right homing thumb down. Because this position is left transparent from every other layer, this layer is always accessible. +It gives access to some essential keys that would typically be accessed on a thumb cluster or pinkies, such as meta, enter, tab, esc and delete. + +As the layer hosting esc, we duplicated some symbols here to allow for fast navigation in vim. For instance, esc, :, w, q can be done in a single roll. + +Where is the keymap.c? +---------------------- + +The keymap.c file is not published to the repository. It is generated from `keymap.json` by the build system. + +This avoids duplicating information and allow users to edit their keymap from the qmk configurator web interface. + +How do I edit and update the keymap? +------------------------------------ + +The `keymap.json` file is generated from the qmk configurator interface and formatted for better readability in the context of the A. Dux keyboard. + +To edit it, you may: +* Edit it directly from a text editor. +* Edit it from the qmk configurator. + +If you decide to use the latter workflow, here are the steps to follow: + +* From the qmk configurator, hit the "import QMK keymap json file" button (it has a drawing with an up arrow on it). +* Browse to the location of your keymap (for example, `/keyboards/a_dux/keymaps/default/keymap.json`) +* Perform any modification to the keymap in the web UI +* Export the keymap to your downloads folder, by hitting the "Export QMK keymap json file" button (it has a drawing with a down arrow on it) +* Override your original keymap with the output of formatting the exported keymap by running a command such as this one from the root of your qmk repo: + ``` + ./keyboards/a_dux/keymaps/json2crab.py --input /default.json > ./keyboards/a_dux/keymaps/default/keymap.json + ``` + Note that you may first need to make json2crab executable by using `chmod +x` on it. + Also note that you may then want to remove the exported keymap from your dowload directory. diff --git a/keyboards/a_dux/keymaps/jcmkk3/keymap.c b/keyboards/a_dux/keymaps/jcmkk3/keymap.c new file mode 100644 index 0000000000..608e0c522e --- /dev/null +++ b/keyboards/a_dux/keymaps/jcmkk3/keymap.c @@ -0,0 +1,130 @@ +/* Copyright 2021 @jcmkk3 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +#include "oneshot.h" + +#define LA_UPP OSL(UPP) +#define LA_SYM OSL(SYM) +#define LA_NAV MO(NAV) + +enum layers { + DEF, + UPP, + SYM, + NAV, + NUM, +}; + +enum keycodes { + // Custom oneshot mod implementation with no timers. + OS_SHFT = SAFE_RANGE, + OS_CTRL, + OS_ALT, + OS_GUI, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [DEF] = LAYOUT( + KC_Y, KC_C, KC_L, KC_M, KC_K, KC_Z, KC_F, KC_U, KC_QUOT, KC_DQUO, + KC_I, KC_S, KC_R, KC_T, KC_G, KC_P, KC_N, KC_E, KC_A, KC_O, + KC_Q, KC_V, KC_W, KC_D, KC_J, KC_B, KC_H, KC_COMM, KC_DOT, KC_X, + LA_NAV, KC_SPC, LA_UPP, LA_SYM + ), + + [UPP] = LAYOUT( + S(KC_Y), S(KC_C), S(KC_L), S(KC_M), S(KC_K), S(KC_Z), S(KC_F), S(KC_U), KC_EXLM, KC_QUES, + S(KC_I), S(KC_S), S(KC_R), S(KC_T), S(KC_G), S(KC_P), S(KC_N), S(KC_E), S(KC_A), S(KC_O), + S(KC_Q), S(KC_V), S(KC_W), S(KC_D), S(KC_J), S(KC_B), S(KC_H), KC_SCLN, KC_COLN, S(KC_X), + _______, _______, _______, _______ + ), + + [SYM] = LAYOUT( + KC_LABK, KC_LCBR, KC_LBRC, KC_LPRN, KC_CIRC, KC_DLR, KC_RPRN, KC_RBRC, KC_RCBR, KC_RABK, + KC_HASH, KC_UNDS, KC_EQL, KC_MINS, KC_PLUS, KC_AMPR, OS_CTRL, OS_SHFT, OS_ALT, OS_GUI, + KC_PERC, KC_GRV, KC_TILD, KC_SLSH, KC_ASTR, KC_PIPE, KC_BSLS, KC_SCLN, KC_COLN, KC_AT, + _______, _______, _______, _______ + ), + + [NAV] = LAYOUT( + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_TAB, KC_UP, KC_ENT, KC_DEL, + OS_GUI, OS_ALT, OS_SHFT, OS_CTRL, XXXXXXX, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_END, + C(KC_Z), C(KC_X), C(KC_C), C(KC_V), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + _______, _______, KC_BSPC, _______ + ), + + [NUM] = LAYOUT( + KC_7, KC_5, KC_3, KC_1, KC_9, KC_8, KC_0, KC_2, KC_4, KC_6, + OS_GUI, OS_ALT, OS_SHFT, OS_CTRL, XXXXXXX, XXXXXXX, OS_CTRL, OS_SHFT, OS_ALT, OS_GUI, + XXXXXXX, XXXXXXX, XXXXXXX, KC_MINS, XXXXXXX, XXXXXXX, XXXXXXX, KC_COMM, KC_DOT, KC_SLSH, + _______, _______, KC_BSPC, _______ + ), +}; + +bool is_oneshot_cancel_key(uint16_t keycode) { + switch (keycode) { + case LA_SYM: + case LA_NAV: + return true; + default: + return false; + } +} + +bool is_oneshot_ignored_key(uint16_t keycode) { + switch (keycode) { + case LA_SYM: + case LA_NAV: + case KC_LSFT: + case OS_SHFT: + case OS_CTRL: + case OS_ALT: + case OS_GUI: + return true; + default: + return false; + } +} + +oneshot_state os_shft_state = os_up_unqueued; +oneshot_state os_ctrl_state = os_up_unqueued; +oneshot_state os_alt_state = os_up_unqueued; +oneshot_state os_gui_state = os_up_unqueued; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + update_oneshot( + &os_shft_state, KC_LSFT, OS_SHFT, + keycode, record + ); + update_oneshot( + &os_ctrl_state, KC_LCTL, OS_CTRL, + keycode, record + ); + update_oneshot( + &os_alt_state, KC_LALT, OS_ALT, + keycode, record + ); + update_oneshot( + &os_gui_state, KC_LGUI, OS_GUI, + keycode, record + ); + + return true; +} + +layer_state_t layer_state_set_user(layer_state_t state) { + return update_tri_layer_state(state, SYM, NAV, NUM); +} diff --git a/keyboards/a_dux/keymaps/jcmkk3/oneshot.c b/keyboards/a_dux/keymaps/jcmkk3/oneshot.c new file mode 100644 index 0000000000..e84b5a7b1d --- /dev/null +++ b/keyboards/a_dux/keymaps/jcmkk3/oneshot.c @@ -0,0 +1,72 @@ +/* Copyright 2021 @jcmkk3 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "oneshot.h" + +void update_oneshot( + oneshot_state *state, + uint16_t mod, + uint16_t trigger, + uint16_t keycode, + keyrecord_t *record +) { + if (keycode == trigger) { + if (record->event.pressed) { + // Trigger keydown + if (*state == os_up_unqueued) { + register_code(mod); + } + *state = os_down_unused; + } else { + // Trigger keyup + switch (*state) { + case os_down_unused: + // If we didn't use the mod while trigger was held, queue it. + *state = os_up_queued; + break; + case os_down_used: + // If we did use the mod while trigger was held, unregister it. + *state = os_up_unqueued; + unregister_code(mod); + break; + default: + break; + } + } + } else { + if (record->event.pressed) { + if (is_oneshot_cancel_key(keycode) && *state != os_up_unqueued) { + // Cancel oneshot on designated cancel keydown. + *state = os_up_unqueued; + unregister_code(mod); + } + } else { + if (!is_oneshot_ignored_key(keycode)) { + // On non-ignored keyup, consider the oneshot used. + switch (*state) { + case os_down_unused: + *state = os_down_used; + break; + case os_up_queued: + *state = os_up_unqueued; + unregister_code(mod); + break; + default: + break; + } + } + } + } +} diff --git a/keyboards/a_dux/keymaps/jcmkk3/oneshot.h b/keyboards/a_dux/keymaps/jcmkk3/oneshot.h new file mode 100644 index 0000000000..b88e68d1d5 --- /dev/null +++ b/keyboards/a_dux/keymaps/jcmkk3/oneshot.h @@ -0,0 +1,46 @@ +/* Copyright 2021 @jcmkk3 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include QMK_KEYBOARD_H + +// Represents the four states a oneshot key can be in +typedef enum { + os_up_unqueued, + os_up_queued, + os_down_unused, + os_down_used, +} oneshot_state; + +// Custom oneshot mod implementation that doesn't rely on timers. If a mod is +// used while it is held it will be unregistered on keyup as normal, otherwise +// it will be queued and only released after the next non-mod keyup. +void update_oneshot( + oneshot_state *state, + uint16_t mod, + uint16_t trigger, + uint16_t keycode, + keyrecord_t *record +); + +// To be implemented by the consumer. Defines keys to cancel oneshot mods. +bool is_oneshot_cancel_key(uint16_t keycode); + +// To be implemented by the consumer. Defines keys to ignore when determining +// whether a oneshot mod has been used. Setting this to modifiers and layer +// change keys allows stacking multiple oneshot modifiers, and carrying them +// between layers. +bool is_oneshot_ignored_key(uint16_t keycode); diff --git a/keyboards/a_dux/keymaps/jcmkk3/rules.mk b/keyboards/a_dux/keymaps/jcmkk3/rules.mk new file mode 100644 index 0000000000..b7dcd87b1e --- /dev/null +++ b/keyboards/a_dux/keymaps/jcmkk3/rules.mk @@ -0,0 +1 @@ +SRC += oneshot.c diff --git a/keyboards/a_dux/readme.md b/keyboards/a_dux/readme.md new file mode 100644 index 0000000000..7d9956f1ef --- /dev/null +++ b/keyboards/a_dux/readme.md @@ -0,0 +1,38 @@ +# Architeuthis Dux + +![Architeuthis Dux](https://raw.githubusercontent.com/tapioki/cephalopoda/main/Images/architeuthis_dux.png) + +AKA A. dux, A.D., "Giant squid" + +34 keys, same stagger as [D. gigas](https://github.com/tapioki/cephalopoda/tree/main/Dosidicus%20gigas), but with two thumb keys included. Pinky, ring, index, and inner columns splayed at 15, 5, 0, -5, -5 degrees. SplitKB Tenting Puck support. All PCB files are available on the [project's github page](https://github.com/tapioki/cephalopoda/tree/main/Architeuthis%20dux) + +Thank you [Perce](https://madebyperce.com/) for the logo. + +## Cases can be found here: + +* [Flat Case](https://github.com/madebyperce/aduxcase) +* [Tented Case](https://github.com/jdart/adux-tent) +* [Case with Plates](https://github.com/sadekbaroudi/cephalopoda/tree/main/Architeuthis%20dux/case) + +## Keyboard Info + +* Keyboard Maintainer: [tapioki](https://github.com/tapioki) +* Hardware Supported: Architeuthis Dux +* Hardware Availability: [GitHub](https://github.com/tapioki/cephalopoda/tree/main/Architeuthis%20dux) + +Make examples for this keyboard (after setting up your build environment): + + make a_dux:default + + make a_dux:default:avrdude-split-left + make a_dux:default:avrdude-split-right + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset**: Briefly short the RST and GND pins on the microcontroller using tweezers, a paperclip, or any other conductive material. +* **Keycode in layout**: Press the key mapped to `RESET` if it is available + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/a_dux/rules.mk b/keyboards/a_dux/rules.mk new file mode 100644 index 0000000000..d7671a17b3 --- /dev/null +++ b/keyboards/a_dux/rules.mk @@ -0,0 +1,23 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +UNICODE_ENABLE = yes +SPLIT_KEYBOARD = yes From 4f37084677d7868362809bdd7df44d44efab2b67 Mon Sep 17 00:00:00 2001 From: clickclackwho <57939398+clickclackwho@users.noreply.github.com> Date: Fri, 24 Sep 2021 08:43:05 -0700 Subject: [PATCH 104/595] [Docs] Broken FAQ hyperlink (#14578) --- docs/understanding_qmk.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/understanding_qmk.md b/docs/understanding_qmk.md index e3dd5cb780..da622044c3 100644 --- a/docs/understanding_qmk.md +++ b/docs/understanding_qmk.md @@ -4,7 +4,7 @@ This document attempts to explain how the QMK firmware works from a very high le * [Introduction](getting_started_introduction.md) * [How Keyboards Work](how_keyboards_work.md) -* [FAQ](faq.md) +* [FAQ](faq_general.md) ## Startup From 2d079c984f9dbf73124d1a07f530d2b2dca44932 Mon Sep 17 00:00:00 2001 From: Nick Abe <57225836+2Moons-JP@users.noreply.github.com> Date: Sat, 25 Sep 2021 00:56:37 +0900 Subject: [PATCH 105/595] [Keyboard] Add Rotor Keyboard (#14407) * rotor keyboard * readme image * info.json update * Update readme.md * Update keyboards/rotor/rules.mk Co-authored-by: Ryan * Update keyboards/rotor/info.json Co-authored-by: Ryan Co-authored-by: Ryan --- keyboards/rotor/config.h | 39 +++++++++++++ keyboards/rotor/info.json | 10 ++++ keyboards/rotor/keymaps/default/keymap.c | 49 +++++++++++++++++ keyboards/rotor/keymaps/default/rules.mk | 2 + keyboards/rotor/keymaps/default_all/keymap.c | 49 +++++++++++++++++ keyboards/rotor/keymaps/default_all/rules.mk | 2 + keyboards/rotor/keymaps/via/config.h | 19 +++++++ keyboards/rotor/keymaps/via/keymap.c | 49 +++++++++++++++++ keyboards/rotor/keymaps/via/rules.mk | 3 + keyboards/rotor/readme.md | 19 +++++++ keyboards/rotor/rotor.c | 17 ++++++ keyboards/rotor/rotor.h | 58 ++++++++++++++++++++ keyboards/rotor/rules.mk | 21 +++++++ 13 files changed, 337 insertions(+) create mode 100644 keyboards/rotor/config.h create mode 100644 keyboards/rotor/info.json create mode 100644 keyboards/rotor/keymaps/default/keymap.c create mode 100644 keyboards/rotor/keymaps/default/rules.mk create mode 100644 keyboards/rotor/keymaps/default_all/keymap.c create mode 100644 keyboards/rotor/keymaps/default_all/rules.mk create mode 100644 keyboards/rotor/keymaps/via/config.h create mode 100644 keyboards/rotor/keymaps/via/keymap.c create mode 100644 keyboards/rotor/keymaps/via/rules.mk create mode 100644 keyboards/rotor/readme.md create mode 100644 keyboards/rotor/rotor.c create mode 100644 keyboards/rotor/rotor.h create mode 100644 keyboards/rotor/rules.mk diff --git a/keyboards/rotor/config.h b/keyboards/rotor/config.h new file mode 100644 index 0000000000..9f3d8aa7d3 --- /dev/null +++ b/keyboards/rotor/config.h @@ -0,0 +1,39 @@ +/* Copyright 2021 Densus Design and Basekeys.jp + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x04D8 +#define PRODUCT_ID 0xE8BE +#define DEVICE_VER 0x0001 +#define MANUFACTURER Densus Design +#define PRODUCT Rotor + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 18 + +/* key matrix pins */ + +#define MATRIX_ROW_PINS { B7, B0, B1, B2, B3 } +#define MATRIX_COL_PINS { E6, F0, F1, F4, F5, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4, D2, D5, D3 } + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + diff --git a/keyboards/rotor/info.json b/keyboards/rotor/info.json new file mode 100644 index 0000000000..a5c86ec4bd --- /dev/null +++ b/keyboards/rotor/info.json @@ -0,0 +1,10 @@ +{ + "keyboard_name": "Rotor", + "url": "https://klc-playground.com/", + "maintainer": "2Moons", + "layouts": { + "LAYOUT": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"label":"Esc", "x":2.25, "y":0}, {"label":"!", "x":3.25, "y":0}, {"label":"@", "x":4.25, "y":0}, {"label":"#", "x":5.25, "y":0}, {"label":"$", "x":6.25, "y":0}, {"label":"%", "x":7.25, "y":0}, {"label":"^", "x":8.25, "y":0}, {"label":"&", "x":9.25, "y":0}, {"label":"*", "x":10.25, "y":0}, {"label":"(", "x":11.25, "y":0}, {"label":")", "x":12.25, "y":0}, {"label":"_", "x":13.25, "y":0}, {"label":"+", "x":14.25, "y":0}, {"label":"Backspace", "x":15.25, "y":0, "w":2}, {"label":"Home", "x":17.25, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"label":"Tab", "x":2.25, "y":1, "w":1.5}, {"label":"Q", "x":3.75, "y":1}, {"label":"W", "x":4.75, "y":1}, {"label":"E", "x":5.75, "y":1}, {"label":"R", "x":6.75, "y":1}, {"label":"T", "x":7.75, "y":1}, {"label":"Y", "x":8.75, "y":1}, {"label":"U", "x":9.75, "y":1}, {"label":"I", "x":10.75, "y":1}, {"label":"O", "x":11.75, "y":1}, {"label":"P", "x":12.75, "y":1}, {"label":"{", "x":13.75, "y":1}, {"label":"}", "x":14.75, "y":1}, {"label":"|", "x":15.75, "y":1, "w":1.5}, {"label":"PgUp", "x":17.25, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"label":"Caps Lock", "x":2.25, "y":2, "w":1.75}, {"label":"A", "x":4, "y":2}, {"label":"S", "x":5, "y":2}, {"label":"D", "x":6, "y":2}, {"label":"F", "x":7, "y":2}, {"label":"G", "x":8, "y":2}, {"label":"H", "x":9, "y":2}, {"label":"J", "x":10, "y":2}, {"label":"K", "x":11, "y":2}, {"label":"L", "x":12, "y":2}, {"label":":", "x":13, "y":2}, {"label":"\"", "x":14, "y":2}, {"label":"Enter", "x":15, "y":2, "w":2.25}, {"label":"PgDn", "x":17.25, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"label":"Shift", "x":2.25, "y":3, "w":2.25}, {"label":"Z", "x":4.5, "y":3}, {"label":"X", "x":5.5, "y":3}, {"label":"C", "x":6.5, "y":3}, {"label":"V", "x":7.5, "y":3}, {"label":"B", "x":8.5, "y":3}, {"label":"N", "x":9.5, "y":3}, {"label":"M", "x":10.5, "y":3}, {"label":"<", "x":11.5, "y":3}, {"label":">", "x":12.5, "y":3}, {"label":"?", "x":13.5, "y":3}, {"label":"Shift", "x":14.5, "y":3, "w":1.75}, {"label":"\u2191", "x":16.25, "y":3}, {"label":"End", "x":17.25, "y":3}, {"x":0, "y":4}, {"x":1, "y":4}, {"label":"Ctrl", "x":2.25, "y":4, "w":1.5}, {"x":3.75, "y":4}, {"label":"Alt", "x":4.75, "y":4, "w":1.5}, {"label":"7u", "x":6.25, "y":4, "w":7}, {"label":"Ctrl", "x":13.25, "y":4, "w":1.5}, {"label":"\u2190", "x":15.25, "y":4}, {"label":"\u2193", "x":16.25, "y":4}, {"label":"\u2192", "x":17.25, "y":4}] + } + } +} \ No newline at end of file diff --git a/keyboards/rotor/keymaps/default/keymap.c b/keyboards/rotor/keymaps/default/keymap.c new file mode 100644 index 0000000000..05c88d9669 --- /dev/null +++ b/keyboards/rotor/keymaps/default/keymap.c @@ -0,0 +1,49 @@ +/* Copyright 2021 Densus Design and Basekeys.jp + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN, + _MEDIA }; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT( + KC_F1, KC_F2, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, + KC_F3, KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_F5, KC_F6, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_F7, KC_F8, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_F9, KC_F10, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [_FN] = LAYOUT( + _______, _______, KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [_MEDIA] = LAYOUT( + _______, _______, KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/rotor/keymaps/default/rules.mk b/keyboards/rotor/keymaps/default/rules.mk new file mode 100644 index 0000000000..910bd64a59 --- /dev/null +++ b/keyboards/rotor/keymaps/default/rules.mk @@ -0,0 +1,2 @@ +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no \ No newline at end of file diff --git a/keyboards/rotor/keymaps/default_all/keymap.c b/keyboards/rotor/keymaps/default_all/keymap.c new file mode 100644 index 0000000000..57ea1b8469 --- /dev/null +++ b/keyboards/rotor/keymaps/default_all/keymap.c @@ -0,0 +1,49 @@ +/* Copyright 2021 Densus Design and Basekeys.jp + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN, + _MEDIA }; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_all( + KC_F1, KC_F2, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, + KC_F3, KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_F5, KC_F6, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT, KC_PGUP, + KC_F7, KC_F8, KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_F9, KC_F10, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RGUI, KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [_FN] = LAYOUT_all( + _______, _______, KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [_MEDIA] = LAYOUT_all( + _______, _______, KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/rotor/keymaps/default_all/rules.mk b/keyboards/rotor/keymaps/default_all/rules.mk new file mode 100644 index 0000000000..910bd64a59 --- /dev/null +++ b/keyboards/rotor/keymaps/default_all/rules.mk @@ -0,0 +1,2 @@ +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no \ No newline at end of file diff --git a/keyboards/rotor/keymaps/via/config.h b/keyboards/rotor/keymaps/via/config.h new file mode 100644 index 0000000000..18fc91cdae --- /dev/null +++ b/keyboards/rotor/keymaps/via/config.h @@ -0,0 +1,19 @@ +/* Copyright 2021 Densus Design and Basekeys.jp + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#define DYNAMIC_KEYMAP_LAYER_COUNT 3 \ No newline at end of file diff --git a/keyboards/rotor/keymaps/via/keymap.c b/keyboards/rotor/keymaps/via/keymap.c new file mode 100644 index 0000000000..3860a50780 --- /dev/null +++ b/keyboards/rotor/keymaps/via/keymap.c @@ -0,0 +1,49 @@ +/* Copyright 2020 Swiftrax and Basekeys.com + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN, + _MEDIA }; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_all( + KC_F1, KC_F2, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, + KC_F3, KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_F5, KC_F6, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT, KC_PGUP, + KC_F7, KC_F8, KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_F9, KC_F10, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RGUI, KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [_FN] = LAYOUT_all( + _______, _______, KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [_MEDIA] = LAYOUT_all( + _______, _______, KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/rotor/keymaps/via/rules.mk b/keyboards/rotor/keymaps/via/rules.mk new file mode 100644 index 0000000000..32f462d06c --- /dev/null +++ b/keyboards/rotor/keymaps/via/rules.mk @@ -0,0 +1,3 @@ +VIA_ENABLE = yes +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no \ No newline at end of file diff --git a/keyboards/rotor/readme.md b/keyboards/rotor/readme.md new file mode 100644 index 0000000000..2fe7f5e494 --- /dev/null +++ b/keyboards/rotor/readme.md @@ -0,0 +1,19 @@ +# Rotor + +![Rotor](https://i.imgur.com/NfWdlzF.png) + +A 75 percent keyboard + +* Keyboard Maintainer: [2moons](https://github.com/2moons-jp) +* Hardware Supported: Rotor PCB, ATMEGA32U4-MU +* Hardware Availability: [Website](https://klc-playground.com/) + +Make example for this keyboard (after setting up your build environment): + + make rotor:default + +To flash firmware onto this board, you'll need to bring the PCB into bootloader mode. To enter bootloader mode, press the reset button on the back of the PCB once. The reset button is located near the left side of the board near the TAB key. + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs) + +[Build guide](https://docs.google.com/document/d/1BWUkFYRJ3aB-AY9pEW-9av5j8VWKI2Hmt8xsCFQgDg0/edit) diff --git a/keyboards/rotor/rotor.c b/keyboards/rotor/rotor.c new file mode 100644 index 0000000000..2a21ed9b4f --- /dev/null +++ b/keyboards/rotor/rotor.c @@ -0,0 +1,17 @@ +/* Copyright 2021 Densus Design and Basekeys.jp + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "rotor.h" diff --git a/keyboards/rotor/rotor.h b/keyboards/rotor/rotor.h new file mode 100644 index 0000000000..0a29bc2fe3 --- /dev/null +++ b/keyboards/rotor/rotor.h @@ -0,0 +1,58 @@ +/* Copyright 2021 Densus Design and Basekeys.jp + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" + +#define XXX KC_NO//readabilty + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0G, k0H, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k1G, k1H, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2G, k2H, \ + k30, k31, k32, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, k3G, k3H, \ + k40, k41, k42, k43, k44, k48, k4D, k4E, k4G, k4H \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, XXX, k0G, k0H}, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, XXX, k1G, k1H}, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, XXX, XXX, k2G, k2H}, \ + { k30, k31, k32, XXX, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, XXX, k3G, k3H}, \ + { k40, k41, k42, k43, k44, XXX, XXX, XXX, k48, XXX, XXX, XXX, XXX, k4D, k4E, XXX, k4G, k4H} \ +} + +#define LAYOUT_all( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, k0G, k0H, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k1G, k1H, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, k2G, k2H, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, k3G, k3H, \ + k40, k41, k42, k43, k44, k46, k48, k4A, k4C, k4D, k4E, k4G, k4H \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, k0G, k0H}, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, XXX, k1G, k1H}, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, XXX, k2G, k2H}, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, XXX, k3G, k3H}, \ + { k40, k41, k42, k43, k44, XXX, k46, XXX, k48, XXX, k4A, XXX, k4C, k4D, k4E, XXX, k4G, k4H} \ +} diff --git a/keyboards/rotor/rules.mk b/keyboards/rotor/rules.mk new file mode 100644 index 0000000000..6d598770a3 --- /dev/null +++ b/keyboards/rotor/rules.mk @@ -0,0 +1,21 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output From 768803ef727b3436a057257d83234809ed0e444f Mon Sep 17 00:00:00 2001 From: Nick Abe <57225836+2Moons-JP@users.noreply.github.com> Date: Sat, 25 Sep 2021 00:57:08 +0900 Subject: [PATCH 106/595] [Keyboard] PLX info.json update (#14536) Co-authored-by: Ryan --- keyboards/plx/info.json | 4 +- keyboards/plx/keymaps/default/keymap.c | 18 ++++---- keyboards/plx/keymaps/default_all/keymap.c | 49 ++++++++++++++++++++++ keyboards/plx/keymaps/via/keymap.c | 6 +-- keyboards/plx/plx.h | 15 +++++++ 5 files changed, 78 insertions(+), 14 deletions(-) create mode 100644 keyboards/plx/keymaps/default_all/keymap.c diff --git a/keyboards/plx/info.json b/keyboards/plx/info.json index d1a7d320ff..a338f1de2c 100644 --- a/keyboards/plx/info.json +++ b/keyboards/plx/info.json @@ -4,7 +4,7 @@ "maintainer": "2Moons", "layouts": { "LAYOUT": { - "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Del", "x":16, "y":0}, {"label":"Bksp", "x":17, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Enter", "x":16.75, "y":1, "w":1.25, "h":2}, {"label":"Caps Lock", "x":0, "y":2, "w":1.25}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"#", "x":15.75, "y":2}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.25}, {"label":"Shift", "x":15.25, "y":3, "w":1.75}, {"label":"Fn", "x":17, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Win", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}, {"label":"Caps", "x":0, "y":5.25, "w":1.25}, {"label":"Shift", "x":0, "y":6.25, "w":1.25}, {"x":1.25, "y":6.25}] + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.25}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.25}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Win", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}] } } -} +} \ No newline at end of file diff --git a/keyboards/plx/keymaps/default/keymap.c b/keyboards/plx/keymaps/default/keymap.c index 40350c4759..9702b27bd2 100644 --- a/keyboards/plx/keymaps/default/keymap.c +++ b/keyboards/plx/keymaps/default/keymap.c @@ -24,26 +24,26 @@ enum layer_names { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_BASE] = LAYOUT( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, - KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FN), + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL ), [_FN] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), [_MEDIA] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) }; diff --git a/keyboards/plx/keymaps/default_all/keymap.c b/keyboards/plx/keymaps/default_all/keymap.c new file mode 100644 index 0000000000..40350c4759 --- /dev/null +++ b/keyboards/plx/keymaps/default_all/keymap.c @@ -0,0 +1,49 @@ +/* Copyright 2020 Peac Design and Basekeys.com + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN, + _MEDIA }; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, + KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FN), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL + ), + + [_FN] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______ + ), + + [_MEDIA] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/plx/keymaps/via/keymap.c b/keyboards/plx/keymaps/via/keymap.c index 80dea066a7..e988833c2e 100644 --- a/keyboards/plx/keymaps/via/keymap.c +++ b/keyboards/plx/keymaps/via/keymap.c @@ -24,7 +24,7 @@ enum layer_names { }; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_BASE] = LAYOUT( + [_BASE] = LAYOUT_all( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, @@ -32,7 +32,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL ), - [_FN] = LAYOUT( + [_FN] = LAYOUT_all( KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, @@ -40,7 +40,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______ ), - [_MEDIA] = LAYOUT( + [_MEDIA] = LAYOUT_all( KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, diff --git a/keyboards/plx/plx.h b/keyboards/plx/plx.h index eb3829042d..9776905f80 100644 --- a/keyboards/plx/plx.h +++ b/keyboards/plx/plx.h @@ -28,6 +28,21 @@ * represents the switch matrix. */ #define LAYOUT( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2D, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, \ + k40, k41, k42, k46, k4B, k4C, k4D \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, XXX}, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D}, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, XXX, k2D}, \ + { k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, XXX}, \ + { k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, XXX, k4B, k4C, k4D} \ +} + +#define LAYOUT_all( \ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, \ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, \ From 257bc473e5483b1411bb5015ccbbaadd08e6ff24 Mon Sep 17 00:00:00 2001 From: Aeonstrife Date: Fri, 24 Sep 2021 21:43:53 +0530 Subject: [PATCH 107/595] [Keyboard] Add Potato65 Solderable PCB (#14047) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- keyboards/buildakb/potato65s/config.h | 72 ++++++++++++++++ keyboards/buildakb/potato65s/info.json | 83 +++++++++++++++++++ .../potato65s/keymaps/default/keymap.c | 39 +++++++++ .../potato65s/keymaps/default/readme.md | 3 + .../buildakb/potato65s/keymaps/via/keymap.c | 54 ++++++++++++ .../buildakb/potato65s/keymaps/via/readme.md | 3 + .../buildakb/potato65s/keymaps/via/rules.mk | 1 + keyboards/buildakb/potato65s/potato65s.c | 17 ++++ keyboards/buildakb/potato65s/potato65s.h | 33 ++++++++ keyboards/buildakb/potato65s/readme.md | 24 ++++++ keyboards/buildakb/potato65s/rules.mk | 21 +++++ 11 files changed, 350 insertions(+) create mode 100644 keyboards/buildakb/potato65s/config.h create mode 100644 keyboards/buildakb/potato65s/info.json create mode 100644 keyboards/buildakb/potato65s/keymaps/default/keymap.c create mode 100644 keyboards/buildakb/potato65s/keymaps/default/readme.md create mode 100644 keyboards/buildakb/potato65s/keymaps/via/keymap.c create mode 100644 keyboards/buildakb/potato65s/keymaps/via/readme.md create mode 100644 keyboards/buildakb/potato65s/keymaps/via/rules.mk create mode 100644 keyboards/buildakb/potato65s/potato65s.c create mode 100644 keyboards/buildakb/potato65s/potato65s.h create mode 100644 keyboards/buildakb/potato65s/readme.md create mode 100644 keyboards/buildakb/potato65s/rules.mk diff --git a/keyboards/buildakb/potato65s/config.h b/keyboards/buildakb/potato65s/config.h new file mode 100644 index 0000000000..5183327855 --- /dev/null +++ b/keyboards/buildakb/potato65s/config.h @@ -0,0 +1,72 @@ +/* +Copyright 2021 Maelkk + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4A56 +#define PRODUCT_ID 0x0003 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Maelkk +#define PRODUCT Potato 65 Solderable + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { F5, F4, F6, F0, D2 } +#define MATRIX_COL_PINS { D3, D4, D6, D7, B4, B5, B6, F1, B0, B1, B2, B3, B7, D0, D1 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +#define RGB_DI_PIN D5 +#ifdef RGB_DI_PIN +# define RGBLIGHT_EFFECT_BREATHING +# define RGBLIGHT_EFFECT_RAINBOW_MOOD +# define RGBLIGHT_EFFECT_RAINBOW_SWIRL +# define RGBLIGHT_EFFECT_SNAKE +# define RGBLIGHT_EFFECT_KNIGHT +# define RGBLIGHT_EFFECT_CHRISTMAS +# define RGBLIGHT_EFFECT_STATIC_GRADIENT +# define RGBLIGHT_EFFECT_RGB_TEST +# define RGBLIGHT_EFFECT_ALTERNATING +# define RGBLIGHT_EFFECT_TWINKLE +# define RGBLED_NUM 16 +# define RGBLIGHT_HUE_STEP 8 +# define RGBLIGHT_SAT_STEP 8 +# define RGBLIGHT_VAL_STEP 8 +# define RGBLIGHT_LIMIT_VAL 240 +# define RGBLIGHT_SLEEP +#endif diff --git a/keyboards/buildakb/potato65s/info.json b/keyboards/buildakb/potato65s/info.json new file mode 100644 index 0000000000..257ed6022d --- /dev/null +++ b/keyboards/buildakb/potato65s/info.json @@ -0,0 +1,83 @@ +{ + "keyboard_name": "Potato 65 Solderable", + "url": "https://github.com/Aeonstrife/potato65solderable", + "maintainer": "Maelkk", + "layouts": { + "LAYOUT_all": { + "layout": [ + { "x":0, "y":0 }, + { "x":1, "y":0 }, + { "x":2, "y":0 }, + { "x":3, "y":0 }, + { "x":4, "y":0 }, + { "x":5, "y":0 }, + { "x":6, "y":0 }, + { "x":7, "y":0 }, + { "x":8, "y":0 }, + { "x":9, "y":0 }, + { "x":10, "y":0 }, + { "x":11, "y":0 }, + { "x":12, "y":0 }, + { "x":13, "y":0 }, + { "x":14, "y":0 }, + { "x":15, "y":0 }, + + { "x":0, "y":1, "w":1.5 }, + { "x":1.5, "y":1 }, + { "x":2.5, "y":1 }, + { "x":3.5, "y":1 }, + { "x":4.5, "y":1 }, + { "x":5.5, "y":1 }, + { "x":6.5, "y":1 }, + { "x":7.5, "y":1 }, + { "x":8.5, "y":1 }, + { "x":9.5, "y":1 }, + { "x":10.5, "y":1 }, + { "x":11.5, "y":1 }, + { "x":12.5, "y":1 }, + { "x":13.5, "y":1, "w":1.5 }, + { "x":15, "y":1 }, + + { "x":0, "y":2, "w":1.75 }, + { "x":1.75, "y":2 }, + { "x":2.75, "y":2 }, + { "x":3.75, "y":2 }, + { "x":4.75, "y":2 }, + { "x":5.75, "y":2 }, + { "x":6.75, "y":2 }, + { "x":7.75, "y":2 }, + { "x":8.75, "y":2 }, + { "x":9.75, "y":2 }, + { "x":10.75, "y":2 }, + { "x":11.75, "y":2 }, + { "x":12.75, "y":2, "w":2.25 }, + { "x":15, "y":2 }, + + { "x":0, "y":3, "w":2.25 }, + { "x":2.25, "y":3 }, + { "x":3.25, "y":3 }, + { "x":4.25, "y":3 }, + { "x":5.25, "y":3 }, + { "x":6.25, "y":3 }, + { "x":7.25, "y":3 }, + { "x":8.25, "y":3 }, + { "x":9.25, "y":3 }, + { "x":10.25, "y":3 }, + { "x":11.25, "y":3 }, + { "x":12.25, "y":3, "w":1.75 }, + { "x":14, "y":3 }, + { "x":15, "y":3 }, + + { "x":0, "y":4, "w":1.25 }, + { "x":1.25, "y":4, "w":1.25 }, + { "x":2.5, "y":4, "w":1.25 }, + { "x":3.75, "y":4, "w":6.25 }, + { "x":10, "y":4, "w":1.25 }, + { "x":11.25, "y":4, "w":1.25 }, + { "x":13, "y":4 }, + { "x":14, "y":4 }, + { "x":15, "y":4 } + ] + } + } +} diff --git a/keyboards/buildakb/potato65s/keymaps/default/keymap.c b/keyboards/buildakb/potato65s/keymaps/default/keymap.c new file mode 100644 index 0000000000..1382100ce1 --- /dev/null +++ b/keyboards/buildakb/potato65s/keymaps/default/keymap.c @@ -0,0 +1,39 @@ +/* Copyright 2021 Maelkk + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +enum layer_names { + _BASE, + _FN +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [_FN1] = LAYOUT_all( + KC_TILD, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, RESET, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, KC_MUTE, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT + ) +}; \ No newline at end of file diff --git a/keyboards/buildakb/potato65s/keymaps/default/readme.md b/keyboards/buildakb/potato65s/keymaps/default/readme.md new file mode 100644 index 0000000000..bb34368c99 --- /dev/null +++ b/keyboards/buildakb/potato65s/keymaps/default/readme.md @@ -0,0 +1,3 @@ +# Default Potato65 Hotswap Layout + +This is the default layout for the Potato65 Hotswap keyboard. Largely based on the KBD67 layout. diff --git a/keyboards/buildakb/potato65s/keymaps/via/keymap.c b/keyboards/buildakb/potato65s/keymaps/via/keymap.c new file mode 100644 index 0000000000..ad49cf5a4d --- /dev/null +++ b/keyboards/buildakb/potato65s/keymaps/via/keymap.c @@ -0,0 +1,54 @@ +/* Copyright 2021 Maelkk + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +enum layer_names { + _BASE, + _FN1, + _FN2, + _FN3 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [_FN1] = LAYOUT_all( + KC_TILD, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, RESET, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, KC_MUTE, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT + ), + [_FN2] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [_FN3] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; \ No newline at end of file diff --git a/keyboards/buildakb/potato65s/keymaps/via/readme.md b/keyboards/buildakb/potato65s/keymaps/via/readme.md new file mode 100644 index 0000000000..4e3ddd1228 --- /dev/null +++ b/keyboards/buildakb/potato65s/keymaps/via/readme.md @@ -0,0 +1,3 @@ +# Default Potato65 Layout + +This is the VIA layout for the Potato65 Hotswap Keyboard. Largely based on the KBD67 layout. diff --git a/keyboards/buildakb/potato65s/keymaps/via/rules.mk b/keyboards/buildakb/potato65s/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/buildakb/potato65s/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/buildakb/potato65s/potato65s.c b/keyboards/buildakb/potato65s/potato65s.c new file mode 100644 index 0000000000..0d86564128 --- /dev/null +++ b/keyboards/buildakb/potato65s/potato65s.c @@ -0,0 +1,17 @@ +/* Copyright 2021 Maelkk + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "potato65s.h" diff --git a/keyboards/buildakb/potato65s/potato65s.h b/keyboards/buildakb/potato65s/potato65s.h new file mode 100644 index 0000000000..739a01af22 --- /dev/null +++ b/keyboards/buildakb/potato65s/potato65s.h @@ -0,0 +1,33 @@ +/* Copyright 2021 Maelkk + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +#define LAYOUT_all( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K212, K014, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K213, K214, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K312, K313, K314, \ + K400, K401, K402, K403, K409, K410, K412, K413, K414 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214 }, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, KC_NO, K312, K313, K314 }, \ + { K400, K401, K402, K403, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K409, K410, KC_NO, K412, K413, K414 } \ +} diff --git a/keyboards/buildakb/potato65s/readme.md b/keyboards/buildakb/potato65s/readme.md new file mode 100644 index 0000000000..f24b97ca63 --- /dev/null +++ b/keyboards/buildakb/potato65s/readme.md @@ -0,0 +1,24 @@ +# Potato65 Solderable Keyboard + +![Potato65 Solderable](https://i.imgur.com/ysAGZCmh.jpg) + +A solderable gasket mount stacked acrylic 65% keyboard + +- Keyboard Maintainer: [Maelkk](https://github.com/Aeonstrife) +- Hardware Supported: Potato65 Keyboard +- Hardware Availability: Private Group-Buy + +Make example for this keyboard (after setting up your build environment): + + make buildakb/potato65s:default + +Flashing example for this keyboard: + + make buildakb/potato65s:default:flash + +To reset into bootloader mode: + +While plugged in, press the RESET switch located on the back of the pcb. +The keyboard should now be in bootloader mode. + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). \ No newline at end of file diff --git a/keyboards/buildakb/potato65s/rules.mk b/keyboards/buildakb/potato65s/rules.mk new file mode 100644 index 0000000000..bb941aca5c --- /dev/null +++ b/keyboards/buildakb/potato65s/rules.mk @@ -0,0 +1,21 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +AUDIO_ENABLE = no # Audio output +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow From 863d9c35feb583356c92aaa04c1b0f234febabc1 Mon Sep 17 00:00:00 2001 From: Andrew Braini Date: Fri, 24 Sep 2021 12:27:29 -0400 Subject: [PATCH 108/595] [Keyboard] Create the battleship gamepad keyboard. (#14551) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- .../battleship_gamepad/battleship_gamepad.c | 30 +++ .../battleship_gamepad/battleship_gamepad.h | 31 +++ .../handwired/battleship_gamepad/config.h | 52 +++++ .../handwired/battleship_gamepad/info.json | 215 ++++++++++++++++++ .../keymaps/default/keymap.c | 41 ++++ .../keymaps/default/readme.md | 2 + .../battleship_gamepad/keymaps/via/keymap.c | 48 ++++ .../battleship_gamepad/keymaps/via/rules.mk | 2 + .../handwired/battleship_gamepad/readme.md | 29 +++ .../handwired/battleship_gamepad/rules.mk | 25 ++ 10 files changed, 475 insertions(+) create mode 100644 keyboards/handwired/battleship_gamepad/battleship_gamepad.c create mode 100644 keyboards/handwired/battleship_gamepad/battleship_gamepad.h create mode 100644 keyboards/handwired/battleship_gamepad/config.h create mode 100644 keyboards/handwired/battleship_gamepad/info.json create mode 100644 keyboards/handwired/battleship_gamepad/keymaps/default/keymap.c create mode 100644 keyboards/handwired/battleship_gamepad/keymaps/default/readme.md create mode 100644 keyboards/handwired/battleship_gamepad/keymaps/via/keymap.c create mode 100644 keyboards/handwired/battleship_gamepad/keymaps/via/rules.mk create mode 100644 keyboards/handwired/battleship_gamepad/readme.md create mode 100644 keyboards/handwired/battleship_gamepad/rules.mk diff --git a/keyboards/handwired/battleship_gamepad/battleship_gamepad.c b/keyboards/handwired/battleship_gamepad/battleship_gamepad.c new file mode 100644 index 0000000000..918a3852d0 --- /dev/null +++ b/keyboards/handwired/battleship_gamepad/battleship_gamepad.c @@ -0,0 +1,30 @@ +/* Copyright 2021 Andrew Braini + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "battleship_gamepad.h" +#include "joystick.h" +#include "analog.h" + +/* joystick config */ +joystick_config_t joystick_axes[JOYSTICK_AXES_COUNT] = { + [0] = JOYSTICK_AXIS_IN(F5, 1023, 512, 0), + [1] = JOYSTICK_AXIS_IN(F4, 0, 512, 1023) +}; + +/* joystick button code (thumbstick pressed) */ +void keyboard_pre_init_kb(void) { + setPinInputHigh(F6); +} diff --git a/keyboards/handwired/battleship_gamepad/battleship_gamepad.h b/keyboards/handwired/battleship_gamepad/battleship_gamepad.h new file mode 100644 index 0000000000..67cf112201 --- /dev/null +++ b/keyboards/handwired/battleship_gamepad/battleship_gamepad.h @@ -0,0 +1,31 @@ +/* Copyright 2021 Andrew Braini + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "quantum.h" + +#define LAYOUT( \ + K00, K01, K02, K03, K04, K05, K06, K07, \ + K10, K11, K12, K13, K14, K15, K16, K17, \ + K20, K21, K22, K23, K24, K25, K26, K27, \ + K30, K31, K32, K33, K34, K35, K36, K37, \ + K40, K41, K42, K43, K44, K45, K46, K47 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07 }, \ + { K10, K11, K12, K13, K14, K15, K16, K17 }, \ + { K20, K21, K22, K23, K24, K25, K26, K27 }, \ + { K30, K31, K32, K33, K34, K35, K36, K37 }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 } \ +} diff --git a/keyboards/handwired/battleship_gamepad/config.h b/keyboards/handwired/battleship_gamepad/config.h new file mode 100644 index 0000000000..1cbfbf87e9 --- /dev/null +++ b/keyboards/handwired/battleship_gamepad/config.h @@ -0,0 +1,52 @@ +/* Copyright 2021 Andrew Braini + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4142 +#define PRODUCT_ID 0x0000 +#define DEVICE_VER 0x0001 +#define MANUFACTURER arbraini +#define PRODUCT Battleship Gamepad + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 8 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { B6, B2, B3, B1, F7 } +#define MATRIX_COL_PINS { D1, D0, D4, C6, D7, E6, B4, B5 } +#define UNUSED_PINS + +/* joystick configuration */ +#define JOYSTICK_BUTTON_COUNT 25 +#define JOYSTICK_AXES_COUNT 2 +#define JOYSTICK_AXES_RESOLUTION 10 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE diff --git a/keyboards/handwired/battleship_gamepad/info.json b/keyboards/handwired/battleship_gamepad/info.json new file mode 100644 index 0000000000..581f290aa2 --- /dev/null +++ b/keyboards/handwired/battleship_gamepad/info.json @@ -0,0 +1,215 @@ +{ + "keyboard_name": "Battleship Gamepad", + "url": "https://github.com/abraini-Nascent/battleship_gamepad", + "maintainer": "arbraini", + "layouts": { + "LAYOUT": { + "layout": [ + { + "label": "F1", + "x": 0, + "y": 0 + }, + { + "label": "F2", + "x": 1, + "y": 0 + }, + { + "label": "Esc", + "x": 2.25, + "y": 0, + "w": 1.25 + }, + { + "label": "!", + "x": 3.5, + "y": 0 + }, + { + "label": "@", + "x": 4.5, + "y": 0 + }, + { + "label": "#", + "x": 5.5, + "y": 0 + }, + { + "label": "$", + "x": 6.5, + "y": 0 + }, + { + "label": "%", + "x": 7.5, + "y": 0 + }, + { + "label": "F3", + "x": 0, + "y": 1 + }, + { + "label": "F4", + "x": 1, + "y": 1 + }, + { + "label": "Tab", + "x": 2.25, + "y": 1, + "w": 1.25 + }, + { + "label": "Q", + "x": 3.5, + "y": 1 + }, + { + "label": "W", + "x": 4.5, + "y": 1 + }, + { + "label": "E", + "x": 5.5, + "y": 1 + }, + { + "label": "R", + "x": 6.5, + "y": 1 + }, + { + "label": "T", + "x": 7.5, + "y": 1 + }, + { + "label": "F5", + "x": 0, + "y": 2 + }, + { + "label": "F6", + "x": 1, + "y": 2 + }, + { + "label": "Caps
Lock", + "x": 2.25, + "y": 2, + "w": 1.25 + }, + { + "label": "A", + "x": 3.5, + "y": 2 + }, + { + "label": "S", + "x": 4.5, + "y": 2 + }, + { + "label": "D", + "x": 5.5, + "y": 2 + }, + { + "label": "F", + "x": 6.5, + "y": 2 + }, + { + "label": "G", + "x": 7.5, + "y": 2 + }, + { + "label": "F7", + "x": 0, + "y": 3 + }, + { + "label": "F8", + "x": 1, + "y": 3 + }, + { + "label": "Shift", + "x": 2.25, + "y": 3, + "w": 1.25 + }, + { + "label": "Z", + "x": 3.5, + "y": 3 + }, + { + "label": "X", + "x": 4.5, + "y": 3 + }, + { + "label": "C", + "x": 5.5, + "y": 3 + }, + { + "label": "V", + "x": 6.5, + "y": 3 + }, + { + "label": "B", + "x": 7.5, + "y": 3 + }, + { + "label": "F9", + "x": 0, + "y": 4 + }, + { + "label": "F10", + "x": 1, + "y": 4 + }, + { + "label": "", + "x": 2.25, + "y": 4, + "w": 1.25 + }, + { + "label": "Ctrl", + "x": 3.5, + "y": 4 + }, + { + "label": "Alt", + "x": 4.5, + "y": 4 + }, + { + "label": "\u21e9", + "x": 5.5, + "y": 4 + }, + { + "label": "\u21e7", + "x": 6.5, + "y": 4 + }, + { + "x": 7.5, + "y": 4 + } + ] + } + } +} diff --git a/keyboards/handwired/battleship_gamepad/keymaps/default/keymap.c b/keyboards/handwired/battleship_gamepad/keymaps/default/keymap.c new file mode 100644 index 0000000000..fa71419ff1 --- /dev/null +++ b/keyboards/handwired/battleship_gamepad/keymaps/default/keymap.c @@ -0,0 +1,41 @@ +/* Copyright 2021 Andrew Braini + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT( + KC_F1, KC_F2, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, + KC_F3, KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, + KC_F5, KC_F6, KC_NO, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_F7, KC_F8, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, + KC_F9, KC_F10, LT(1, KC_NO), KC_LCTL, KC_LALT, KC_NO, LT(1, KC_NO), KC_SPC), + + [1] = LAYOUT( + RESET, DEBUG, KC_TILD, KC_6, KC_7, KC_8, KC_9, KC_0, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, TG(2), KC_TRNS, KC_TRNS), + + [2] = LAYOUT( + KC_TRNS, KC_TRNS, TG(2), JS_BUTTON0, JS_BUTTON1, JS_BUTTON2, JS_BUTTON3, JS_BUTTON4, + KC_TRNS, KC_TRNS, KC_TRNS, JS_BUTTON5, JS_BUTTON6, JS_BUTTON7, JS_BUTTON8, JS_BUTTON9, + KC_TRNS, KC_TRNS, KC_TRNS, JS_BUTTON10, JS_BUTTON11, JS_BUTTON12, JS_BUTTON13, JS_BUTTON14, + KC_TRNS, KC_TRNS, KC_TRNS, JS_BUTTON15, JS_BUTTON16, JS_BUTTON17, JS_BUTTON18, JS_BUTTON19, + KC_TRNS, KC_TRNS, KC_TRNS, JS_BUTTON20, JS_BUTTON21, JS_BUTTON22, JS_BUTTON23, JS_BUTTON24) +}; diff --git a/keyboards/handwired/battleship_gamepad/keymaps/default/readme.md b/keyboards/handwired/battleship_gamepad/keymaps/default/readme.md new file mode 100644 index 0000000000..1de5d7dd68 --- /dev/null +++ b/keyboards/handwired/battleship_gamepad/keymaps/default/readme.md @@ -0,0 +1,2 @@ +# Battleship Gamepad - Default layout +Default layout with 2 axies thumbstick and press to click diff --git a/keyboards/handwired/battleship_gamepad/keymaps/via/keymap.c b/keyboards/handwired/battleship_gamepad/keymaps/via/keymap.c new file mode 100644 index 0000000000..9a70d36b77 --- /dev/null +++ b/keyboards/handwired/battleship_gamepad/keymaps/via/keymap.c @@ -0,0 +1,48 @@ +/* Copyright 2021 Andrew Braini + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT( + KC_F1, KC_F2, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, + KC_F3, KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, + KC_F5, KC_F6, KC_NO, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_F7, KC_F8, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, + KC_F9, KC_F10, LT(1, KC_NO), KC_LCTL, KC_LALT, LT(2, KC_NO), LT(1, KC_NO), KC_SPC), + + [1] = LAYOUT( + RESET, DEBUG, KC_TILD, KC_6, KC_7, KC_8, KC_9, KC_0, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [2] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [3] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) +}; diff --git a/keyboards/handwired/battleship_gamepad/keymaps/via/rules.mk b/keyboards/handwired/battleship_gamepad/keymaps/via/rules.mk new file mode 100644 index 0000000000..35a31dea8e --- /dev/null +++ b/keyboards/handwired/battleship_gamepad/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +CONSOLE_ENABLE = no diff --git a/keyboards/handwired/battleship_gamepad/readme.md b/keyboards/handwired/battleship_gamepad/readme.md new file mode 100644 index 0000000000..c566753161 --- /dev/null +++ b/keyboards/handwired/battleship_gamepad/readme.md @@ -0,0 +1,29 @@ +# Battleship Gamepad + +![Battleship Gamepad](https://imgur.com/FCpQfzQ.jpg) + +A hand-wired 3d-printed mechanical keyboard intended for one hand with an analog thumbstick for movement. The layout matches the left side of large "battleship" keyboards with their extra bank of 2x5 1u F keys. + +Build instructions and 3d printer files can be found in the [project github repo](https://github.com/abraini-Nascent/battleship_gamepad) + +* Keyboard Maintainer: [arbraini](https://github.com/abraini-Nascent) +* Hardware Supported: Arduino Pro Micro +* Features: 40 keys in an ortho layout and an analog thumbstick. + +Make example for this keyboard (after setting up your build environment): + + make handwired/battleship_gamepad:default + +Flashing example for this keyboard: + + make handwired/battleship_gamepad:flash + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (the top left key in the 2x5 bank) and plug in the keyboard. +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead. +* **Keycode in layout**: Press the key mapped to `RESET`. In the default layout this is the key at (0,0) on layer 1. + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/handwired/battleship_gamepad/rules.mk b/keyboards/handwired/battleship_gamepad/rules.mk new file mode 100644 index 0000000000..b7a26d8fc5 --- /dev/null +++ b/keyboards/handwired/battleship_gamepad/rules.mk @@ -0,0 +1,25 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = caterina + +SRC += analog.c + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +JOYSTICK_ENABLE = yes +JOYSTICK_DRIVER = analog From 3778dd5727e2ba468e559bc949b0f74827fe1a97 Mon Sep 17 00:00:00 2001 From: "WiZ.GG" <39291381+wizard-gg@users.noreply.github.com> Date: Fri, 24 Sep 2021 19:59:18 +0330 Subject: [PATCH 109/595] [Keyboard] add 2 keys in jkb65 keymap (#14576) --- keyboards/jadookb/jkb65/config.h | 2 +- keyboards/jadookb/jkb65/keymaps/default/keymap.c | 4 ++-- keyboards/jadookb/jkb65/keymaps/via/keymap.c | 4 ++-- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/keyboards/jadookb/jkb65/config.h b/keyboards/jadookb/jkb65/config.h index 8af9b04fc8..a7710a0e03 100644 --- a/keyboards/jadookb/jkb65/config.h +++ b/keyboards/jadookb/jkb65/config.h @@ -41,7 +41,7 @@ #define RGB_DISABLE_WHEN_USB_SUSPENDED #define RGB_MATRIX_FRAMEBUFFER_EFFECTS #define RGB_MATRIX_KEYPRESSES -#define RGB_DISABLE_TIMEOUT 60000 +#define RGB_DISABLE_TIMEOUT 90000 #define DEBOUNCE 5 diff --git a/keyboards/jadookb/jkb65/keymaps/default/keymap.c b/keyboards/jadookb/jkb65/keymaps/default/keymap.c index 9a01fb6165..b7b81a1500 100644 --- a/keyboards/jadookb/jkb65/keymaps/default/keymap.c +++ b/keyboards/jadookb/jkb65/keymaps/default/keymap.c @@ -29,8 +29,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), [1] = LAYOUT_67_ansi( KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_PSCR, - _______, RGB_RMOD, _______, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, RGB_RMOD, RGB_HUI, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, RGB_HUD, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAI, _______, MAGIC_UNNO_GUI,MAGIC_NO_GUI, _______, RGB_TOG, _______, MO(2), RGB_SPD, RGB_VAD, RGB_SPI ), diff --git a/keyboards/jadookb/jkb65/keymaps/via/keymap.c b/keyboards/jadookb/jkb65/keymaps/via/keymap.c index 9a01fb6165..b7b81a1500 100644 --- a/keyboards/jadookb/jkb65/keymaps/via/keymap.c +++ b/keyboards/jadookb/jkb65/keymaps/via/keymap.c @@ -29,8 +29,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), [1] = LAYOUT_67_ansi( KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_PSCR, - _______, RGB_RMOD, _______, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, RGB_RMOD, RGB_HUI, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, RGB_HUD, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAI, _______, MAGIC_UNNO_GUI,MAGIC_NO_GUI, _______, RGB_TOG, _______, MO(2), RGB_SPD, RGB_VAD, RGB_SPI ), From 076a332613229110bb39d572f5b342306d380a74 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Fri, 24 Sep 2021 16:29:46 +0000 Subject: [PATCH 110/595] Swift65 Solder Refactor (#14579) --- keyboards/alfredslab/swift65/solder/info.json | 232 +++++++++++++++++- .../swift65/solder/keymaps/default/keymap.c | 4 +- .../swift65/solder/keymaps/default/readme.md | 3 - .../swift65/solder/keymaps/via/keymap.c | 8 +- .../swift65/solder/keymaps/via/readme.md | 3 - keyboards/alfredslab/swift65/solder/readme.md | 2 +- keyboards/alfredslab/swift65/solder/solder.h | 56 ++++- 7 files changed, 287 insertions(+), 21 deletions(-) delete mode 100644 keyboards/alfredslab/swift65/solder/keymaps/default/readme.md delete mode 100644 keyboards/alfredslab/swift65/solder/keymaps/via/readme.md diff --git a/keyboards/alfredslab/swift65/solder/info.json b/keyboards/alfredslab/swift65/solder/info.json index 8dea538708..69729e4330 100644 --- a/keyboards/alfredslab/swift65/solder/info.json +++ b/keyboards/alfredslab/swift65/solder/info.json @@ -2,8 +2,86 @@ "keyboard_name": "Swift65", "url": "https://swiftcables.net/", "maintainer": "Spooknik", + "layout_aliases": { + "LAYOUT": "LAYOUT_625u_space_split_bs", + "LAYOUT_all": "LAYOUT_625u_space_split_bs" + }, "layouts": { - "LAYOUT": { + "LAYOUT_625u_space": { + "layout": [ + {"label":"K00 (B1,F7)", "x":0, "y":0}, + {"label":"K01 (B1,F6)", "x":1, "y":0}, + {"label":"K02 (B1,F5)", "x":2, "y":0}, + {"label":"K03 (B1,F4)", "x":3, "y":0}, + {"label":"K04 (B1,F1)", "x":4, "y":0}, + {"label":"K05 (B1,F0)", "x":5, "y":0}, + {"label":"K06 (B1,C7)", "x":6, "y":0}, + {"label":"K07 (B1,C6)", "x":7, "y":0}, + {"label":"K08 (B1,B6)", "x":8, "y":0}, + {"label":"K09 (B1,B5)", "x":9, "y":0}, + {"label":"K0A (B1,B4)", "x":10, "y":0}, + {"label":"K0B (B1,D7)", "x":11, "y":0}, + {"label":"K0C (B1,D5)", "x":12, "y":0}, + {"label":"K0D (B1,D3)", "x":13, "y":0, "w":2}, + {"label":"K0E (B1,D1)", "x":15.25, "y":0}, + + {"label":"K10 (B2,F7)", "x":0, "y":1, "w":1.5}, + {"label":"K11 (B2,F6)", "x":1.5, "y":1}, + {"label":"K12 (B2,F5)", "x":2.5, "y":1}, + {"label":"K13 (B2,F4)", "x":3.5, "y":1}, + {"label":"K14 (B2,F1)", "x":4.5, "y":1}, + {"label":"K15 (B2,F0)", "x":5.5, "y":1}, + {"label":"K16 (B2,C7)", "x":6.5, "y":1}, + {"label":"K17 (B2,C6)", "x":7.5, "y":1}, + {"label":"K18 (B2,B6)", "x":8.5, "y":1}, + {"label":"K19 (B2,B5)", "x":9.5, "y":1}, + {"label":"K1A (B2,B4)", "x":10.5, "y":1}, + {"label":"K1B (B2,D7)", "x":11.5, "y":1}, + {"label":"K1C (B2,D5)", "x":12.5, "y":1}, + {"label":"K1D (B2,D3)", "x":13.5, "y":1, "w":1.5}, + {"label":"K1E (B2,D1)", "x":15.25, "y":1}, + + {"label":"K20 (B3,F7)", "x":0, "y":2, "w":1.75}, + {"label":"K21 (B3,F6)", "x":1.75, "y":2}, + {"label":"K22 (B3,F5)", "x":2.75, "y":2}, + {"label":"K23 (B3,F4)", "x":3.75, "y":2}, + {"label":"K24 (B3,F1)", "x":4.75, "y":2}, + {"label":"K25 (B3,F0)", "x":5.75, "y":2}, + {"label":"K26 (B3,C7)", "x":6.75, "y":2}, + {"label":"K27 (B3,C6)", "x":7.75, "y":2}, + {"label":"K28 (B3,B6)", "x":8.75, "y":2}, + {"label":"K29 (B3,B5)", "x":9.75, "y":2}, + {"label":"K2A (B3,B4)", "x":10.75, "y":2}, + {"label":"K2B (B3,D7)", "x":11.75, "y":2}, + {"label":"K2C (B3,D5)", "x":12.75, "y":2, "w":2.25}, + {"label":"K2E (B3,D1)", "x":15.25, "y":2}, + + {"label":"K30 (D4,F7)", "x":0, "y":3, "w":2.25}, + {"label":"K32 (D4,F5)", "x":2.25, "y":3}, + {"label":"K33 (D4,F4)", "x":3.25, "y":3}, + {"label":"K34 (D4,F1)", "x":4.25, "y":3}, + {"label":"K35 (D4,F0)", "x":5.25, "y":3}, + {"label":"K36 (D4,C7)", "x":6.25, "y":3}, + {"label":"K37 (D4,C6)", "x":7.25, "y":3}, + {"label":"K38 (D4,B6)", "x":8.25, "y":3}, + {"label":"K39 (D4,B5)", "x":9.25, "y":3}, + {"label":"K3A (D4,B4)", "x":10.25, "y":3}, + {"label":"K3B (D4,D7)", "x":11.25, "y":3}, + {"label":"K3C (D4,D5)", "x":12.25, "y":3, "w":1.75}, + {"label":"K3D (D4,D3)", "x":14, "y":3}, + + {"label":"K40 (D6,F7)", "x":0, "y":4, "w":1.25}, + {"label":"K41 (D6,F6)", "x":1.25, "y":4, "w":1.25}, + {"label":"K43 (D6,F4)", "x":2.5, "y":4, "w":1.25}, + {"label":"K46 (D6,C7)", "x":3.75, "y":4, "w":6.25}, + {"label":"K4A (D6,B4)", "x":10, "y":4, "w":1.25}, + {"label":"K4B (D6,D7)", "x":11.25, "y":4, "w":1.25}, + {"label":"K4C (D6,D5)", "x":13, "y":4}, + {"label":"K4D (D6,D3)", "x":14, "y":4}, + {"label":"K4E (D6,D1)", "x":15, "y":4} + ] + }, + "LAYOUT_625u_space_split_bs": { "layout": [ {"label":"K00 (B1,F7)", "x":0, "y":0}, {"label":"K01 (B1,F6)", "x":1, "y":0}, @@ -21,6 +99,7 @@ {"label":"K0D (B1,D3)", "x":13, "y":0}, {"label":"K0F (B1,D0)", "x":14, "y":0}, {"label":"K0E (B1,D1)", "x":15.25, "y":0}, + {"label":"K10 (B2,F7)", "x":0, "y":1, "w":1.5}, {"label":"K11 (B2,F6)", "x":1.5, "y":1}, {"label":"K12 (B2,F5)", "x":2.5, "y":1}, @@ -36,6 +115,7 @@ {"label":"K1C (B2,D5)", "x":12.5, "y":1}, {"label":"K1D (B2,D3)", "x":13.5, "y":1, "w":1.5}, {"label":"K1E (B2,D1)", "x":15.25, "y":1}, + {"label":"K20 (B3,F7)", "x":0, "y":2, "w":1.75}, {"label":"K21 (B3,F6)", "x":1.75, "y":2}, {"label":"K22 (B3,F5)", "x":2.75, "y":2}, @@ -50,6 +130,7 @@ {"label":"K2B (B3,D7)", "x":11.75, "y":2}, {"label":"K2C (B3,D5)", "x":12.75, "y":2, "w":2.25}, {"label":"K2E (B3,D1)", "x":15.25, "y":2}, + {"label":"K30 (D4,F7)", "x":0, "y":3, "w":2.25}, {"label":"K32 (D4,F5)", "x":2.25, "y":3}, {"label":"K33 (D4,F4)", "x":3.25, "y":3}, @@ -63,6 +144,7 @@ {"label":"K3B (D4,D7)", "x":11.25, "y":3}, {"label":"K3C (D4,D5)", "x":12.25, "y":3, "w":1.75}, {"label":"K3D (D4,D3)", "x":14, "y":3}, + {"label":"K40 (D6,F7)", "x":0, "y":4, "w":1.25}, {"label":"K41 (D6,F6)", "x":1.25, "y":4, "w":1.25}, {"label":"K43 (D6,F4)", "x":2.5, "y":4, "w":1.25}, @@ -73,7 +155,153 @@ {"label":"K4D (D6,D3)", "x":14, "y":4}, {"label":"K4E (D6,D1)", "x":15, "y":4} ] + }, + "LAYOUT_7u_space": { + "layout": [ + {"label":"K00 (B1,F7)", "x":0, "y":0}, + {"label":"K01 (B1,F6)", "x":1, "y":0}, + {"label":"K02 (B1,F5)", "x":2, "y":0}, + {"label":"K03 (B1,F4)", "x":3, "y":0}, + {"label":"K04 (B1,F1)", "x":4, "y":0}, + {"label":"K05 (B1,F0)", "x":5, "y":0}, + {"label":"K06 (B1,C7)", "x":6, "y":0}, + {"label":"K07 (B1,C6)", "x":7, "y":0}, + {"label":"K08 (B1,B6)", "x":8, "y":0}, + {"label":"K09 (B1,B5)", "x":9, "y":0}, + {"label":"K0A (B1,B4)", "x":10, "y":0}, + {"label":"K0B (B1,D7)", "x":11, "y":0}, + {"label":"K0C (B1,D5)", "x":12, "y":0}, + {"label":"K0D (B1,D3)", "x":13, "y":0, "w":2}, + {"label":"K0E (B1,D1)", "x":15.25, "y":0}, + + {"label":"K10 (B2,F7)", "x":0, "y":1, "w":1.5}, + {"label":"K11 (B2,F6)", "x":1.5, "y":1}, + {"label":"K12 (B2,F5)", "x":2.5, "y":1}, + {"label":"K13 (B2,F4)", "x":3.5, "y":1}, + {"label":"K14 (B2,F1)", "x":4.5, "y":1}, + {"label":"K15 (B2,F0)", "x":5.5, "y":1}, + {"label":"K16 (B2,C7)", "x":6.5, "y":1}, + {"label":"K17 (B2,C6)", "x":7.5, "y":1}, + {"label":"K18 (B2,B6)", "x":8.5, "y":1}, + {"label":"K19 (B2,B5)", "x":9.5, "y":1}, + {"label":"K1A (B2,B4)", "x":10.5, "y":1}, + {"label":"K1B (B2,D7)", "x":11.5, "y":1}, + {"label":"K1C (B2,D5)", "x":12.5, "y":1}, + {"label":"K1D (B2,D3)", "x":13.5, "y":1, "w":1.5}, + {"label":"K1E (B2,D1)", "x":15.25, "y":1}, + + {"label":"K20 (B3,F7)", "x":0, "y":2, "w":1.75}, + {"label":"K21 (B3,F6)", "x":1.75, "y":2}, + {"label":"K22 (B3,F5)", "x":2.75, "y":2}, + {"label":"K23 (B3,F4)", "x":3.75, "y":2}, + {"label":"K24 (B3,F1)", "x":4.75, "y":2}, + {"label":"K25 (B3,F0)", "x":5.75, "y":2}, + {"label":"K26 (B3,C7)", "x":6.75, "y":2}, + {"label":"K27 (B3,C6)", "x":7.75, "y":2}, + {"label":"K28 (B3,B6)", "x":8.75, "y":2}, + {"label":"K29 (B3,B5)", "x":9.75, "y":2}, + {"label":"K2A (B3,B4)", "x":10.75, "y":2}, + {"label":"K2B (B3,D7)", "x":11.75, "y":2}, + {"label":"K2C (B3,D5)", "x":12.75, "y":2, "w":2.25}, + {"label":"K2E (B3,D1)", "x":15.25, "y":2}, + + {"label":"K30 (D4,F7)", "x":0, "y":3, "w":2.25}, + {"label":"K32 (D4,F5)", "x":2.25, "y":3}, + {"label":"K33 (D4,F4)", "x":3.25, "y":3}, + {"label":"K34 (D4,F1)", "x":4.25, "y":3}, + {"label":"K35 (D4,F0)", "x":5.25, "y":3}, + {"label":"K36 (D4,C7)", "x":6.25, "y":3}, + {"label":"K37 (D4,C6)", "x":7.25, "y":3}, + {"label":"K38 (D4,B6)", "x":8.25, "y":3}, + {"label":"K39 (D4,B5)", "x":9.25, "y":3}, + {"label":"K3A (D4,B4)", "x":10.25, "y":3}, + {"label":"K3B (D4,D7)", "x":11.25, "y":3}, + {"label":"K3C (D4,D5)", "x":12.25, "y":3, "w":1.75}, + {"label":"K3D (D4,D3)", "x":14, "y":3}, + + {"label":"K40 (D6,F7)", "x":0, "y":4, "w":1.5}, + {"label":"K41 (D6,F6)", "x":1.5, "y":4}, + {"label":"K43 (D6,F4)", "x":2.5, "y":4, "w":1.5}, + {"label":"K46 (D6,C7)", "x":4, "y":4, "w":7}, + {"label":"K4B (D6,D7)", "x":11, "y":4, "w":1.5}, + {"label":"K4C (D6,D5)", "x":13, "y":4}, + {"label":"K4D (D6,D3)", "x":14, "y":4}, + {"label":"K4E (D6,D1)", "x":15, "y":4} + ] + }, + "LAYOUT_7u_space_split_bs": { + "layout": [ + {"label":"K00 (B1,F7)", "x":0, "y":0}, + {"label":"K01 (B1,F6)", "x":1, "y":0}, + {"label":"K02 (B1,F5)", "x":2, "y":0}, + {"label":"K03 (B1,F4)", "x":3, "y":0}, + {"label":"K04 (B1,F1)", "x":4, "y":0}, + {"label":"K05 (B1,F0)", "x":5, "y":0}, + {"label":"K06 (B1,C7)", "x":6, "y":0}, + {"label":"K07 (B1,C6)", "x":7, "y":0}, + {"label":"K08 (B1,B6)", "x":8, "y":0}, + {"label":"K09 (B1,B5)", "x":9, "y":0}, + {"label":"K0A (B1,B4)", "x":10, "y":0}, + {"label":"K0B (B1,D7)", "x":11, "y":0}, + {"label":"K0C (B1,D5)", "x":12, "y":0}, + {"label":"K0D (B1,D3)", "x":13, "y":0}, + {"label":"K0F (B1,D0)", "x":14, "y":0}, + {"label":"K0E (B1,D1)", "x":15.25, "y":0}, + + {"label":"K10 (B2,F7)", "x":0, "y":1, "w":1.5}, + {"label":"K11 (B2,F6)", "x":1.5, "y":1}, + {"label":"K12 (B2,F5)", "x":2.5, "y":1}, + {"label":"K13 (B2,F4)", "x":3.5, "y":1}, + {"label":"K14 (B2,F1)", "x":4.5, "y":1}, + {"label":"K15 (B2,F0)", "x":5.5, "y":1}, + {"label":"K16 (B2,C7)", "x":6.5, "y":1}, + {"label":"K17 (B2,C6)", "x":7.5, "y":1}, + {"label":"K18 (B2,B6)", "x":8.5, "y":1}, + {"label":"K19 (B2,B5)", "x":9.5, "y":1}, + {"label":"K1A (B2,B4)", "x":10.5, "y":1}, + {"label":"K1B (B2,D7)", "x":11.5, "y":1}, + {"label":"K1C (B2,D5)", "x":12.5, "y":1}, + {"label":"K1D (B2,D3)", "x":13.5, "y":1, "w":1.5}, + {"label":"K1E (B2,D1)", "x":15.25, "y":1}, + + {"label":"K20 (B3,F7)", "x":0, "y":2, "w":1.75}, + {"label":"K21 (B3,F6)", "x":1.75, "y":2}, + {"label":"K22 (B3,F5)", "x":2.75, "y":2}, + {"label":"K23 (B3,F4)", "x":3.75, "y":2}, + {"label":"K24 (B3,F1)", "x":4.75, "y":2}, + {"label":"K25 (B3,F0)", "x":5.75, "y":2}, + {"label":"K26 (B3,C7)", "x":6.75, "y":2}, + {"label":"K27 (B3,C6)", "x":7.75, "y":2}, + {"label":"K28 (B3,B6)", "x":8.75, "y":2}, + {"label":"K29 (B3,B5)", "x":9.75, "y":2}, + {"label":"K2A (B3,B4)", "x":10.75, "y":2}, + {"label":"K2B (B3,D7)", "x":11.75, "y":2}, + {"label":"K2C (B3,D5)", "x":12.75, "y":2, "w":2.25}, + {"label":"K2E (B3,D1)", "x":15.25, "y":2}, + + {"label":"K30 (D4,F7)", "x":0, "y":3, "w":2.25}, + {"label":"K32 (D4,F5)", "x":2.25, "y":3}, + {"label":"K33 (D4,F4)", "x":3.25, "y":3}, + {"label":"K34 (D4,F1)", "x":4.25, "y":3}, + {"label":"K35 (D4,F0)", "x":5.25, "y":3}, + {"label":"K36 (D4,C7)", "x":6.25, "y":3}, + {"label":"K37 (D4,C6)", "x":7.25, "y":3}, + {"label":"K38 (D4,B6)", "x":8.25, "y":3}, + {"label":"K39 (D4,B5)", "x":9.25, "y":3}, + {"label":"K3A (D4,B4)", "x":10.25, "y":3}, + {"label":"K3B (D4,D7)", "x":11.25, "y":3}, + {"label":"K3C (D4,D5)", "x":12.25, "y":3, "w":1.75}, + {"label":"K3D (D4,D3)", "x":14, "y":3}, + + {"label":"K40 (D6,F7)", "x":0, "y":4, "w":1.5}, + {"label":"K41 (D6,F6)", "x":1.5, "y":4}, + {"label":"K43 (D6,F4)", "x":2.5, "y":4, "w":1.5}, + {"label":"K46 (D6,C7)", "x":4, "y":4, "w":7}, + {"label":"K4B (D6,D7)", "x":11, "y":4, "w":1.5}, + {"label":"K4C (D6,D5)", "x":13, "y":4}, + {"label":"K4D (D6,D3)", "x":14, "y":4}, + {"label":"K4E (D6,D1)", "x":15, "y":4} + ] } } - ,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/" } diff --git a/keyboards/alfredslab/swift65/solder/keymaps/default/keymap.c b/keyboards/alfredslab/swift65/solder/keymaps/default/keymap.c index 274809bb11..e3367f159b 100644 --- a/keyboards/alfredslab/swift65/solder/keymaps/default/keymap.c +++ b/keyboards/alfredslab/swift65/solder/keymaps/default/keymap.c @@ -17,14 +17,14 @@ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( + [0] = LAYOUT_625u_space_split_bs( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_HOME, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT ), - [1] = LAYOUT( + [1] = LAYOUT_625u_space_split_bs( KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGDN, diff --git a/keyboards/alfredslab/swift65/solder/keymaps/default/readme.md b/keyboards/alfredslab/swift65/solder/keymaps/default/readme.md deleted file mode 100644 index 74de146080..0000000000 --- a/keyboards/alfredslab/swift65/solder/keymaps/default/readme.md +++ /dev/null @@ -1,3 +0,0 @@ -# Default Swift65 Solder Layout - -![](https://i.imgur.com/7Capi8W.png) diff --git a/keyboards/alfredslab/swift65/solder/keymaps/via/keymap.c b/keyboards/alfredslab/swift65/solder/keymaps/via/keymap.c index 9936becce6..fddfd94765 100644 --- a/keyboards/alfredslab/swift65/solder/keymaps/via/keymap.c +++ b/keyboards/alfredslab/swift65/solder/keymaps/via/keymap.c @@ -17,28 +17,28 @@ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( + [0] = LAYOUT_625u_space_split_bs( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_HOME, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT ), - [1] = LAYOUT( + [1] = LAYOUT_625u_space_split_bs( KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGDN, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGUP, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END ), - [2] = LAYOUT( + [2] = LAYOUT_625u_space_split_bs( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), - [3] = LAYOUT( + [3] = LAYOUT_625u_space_split_bs( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, diff --git a/keyboards/alfredslab/swift65/solder/keymaps/via/readme.md b/keyboards/alfredslab/swift65/solder/keymaps/via/readme.md deleted file mode 100644 index 74de146080..0000000000 --- a/keyboards/alfredslab/swift65/solder/keymaps/via/readme.md +++ /dev/null @@ -1,3 +0,0 @@ -# Default Swift65 Solder Layout - -![](https://i.imgur.com/7Capi8W.png) diff --git a/keyboards/alfredslab/swift65/solder/readme.md b/keyboards/alfredslab/swift65/solder/readme.md index b477438199..9a5c277ef8 100644 --- a/keyboards/alfredslab/swift65/solder/readme.md +++ b/keyboards/alfredslab/swift65/solder/readme.md @@ -2,7 +2,7 @@ A 65% Keyboard from Swiftcables -* Keyboard Maintainer: [Steven Phillips (spoonik)](https://github.com/keyboardcollective) +* Keyboard Maintainer: [Steven Phillips (spooknik)](https://github.com/keyboardcollective) * Hardware Supported: Swift65 Solder * Hardware Availability: Soom from Swiftcables diff --git a/keyboards/alfredslab/swift65/solder/solder.h b/keyboards/alfredslab/swift65/solder/solder.h index 7629379f59..651497bec4 100644 --- a/keyboards/alfredslab/swift65/solder/solder.h +++ b/keyboards/alfredslab/swift65/solder/solder.h @@ -18,16 +18,60 @@ #include "quantum.h" -#define LAYOUT( \ +#define XXX KC_NO + +#define LAYOUT_625u_space( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2E, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ + K40, K41, K43, K46, K4A, K4B, K4C, K4D, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, XXX }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, XXX }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, XXX, K2E, XXX }, \ + { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, XXX, XXX }, \ + { K40, K41, XXX, K43, XXX, XXX, K46, XXX, XXX, XXX, K4A, K4B, K4C, K4D, K4E, XXX }, \ +} + +#define LAYOUT_625u_space_split_bs( \ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0F, K0E, \ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2E, \ K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ K40, K41, K43, K46, K4A, K4B, K4C, K4D, K4E \ ) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, KC_NO }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, KC_NO, K2E, KC_NO }, \ - { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, KC_NO, KC_NO }, \ - { K40, K41, KC_NO, K43, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, K4E, KC_NO }, \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, XXX }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, XXX, K2E, XXX }, \ + { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, XXX, XXX }, \ + { K40, K41, XXX, K43, XXX, XXX, K46, XXX, XXX, XXX, K4A, K4B, K4C, K4D, K4E, XXX }, \ +} + +#define LAYOUT_7u_space( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2E, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ + K40, K41, K43, K46, K4B, K4C, K4D, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, XXX }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, XXX }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, XXX, K2E, XXX }, \ + { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, XXX, XXX }, \ + { K40, K41, XXX, K43, XXX, XXX, K46, XXX, XXX, XXX, XXX, K4B, K4C, K4D, K4E, XXX }, \ +} + +#define LAYOUT_7u_space_split_bs( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0F, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2E, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ + K40, K41, K43, K46, K4B, K4C, K4D, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, XXX }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, XXX, K2E, XXX }, \ + { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, XXX, XXX }, \ + { K40, K41, XXX, K43, XXX, XXX, K46, XXX, XXX, XXX, XXX, K4B, K4C, K4D, K4E, XXX }, \ } From 60b13d04cdf4b27f387be90d830dd196c38b1362 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Fri, 24 Sep 2021 16:29:58 +0000 Subject: [PATCH 111/595] Alf X2 Refactor (#14572) --- keyboards/alf/x2/config.h | 24 ++++- keyboards/alf/x2/info.json | 94 +++++++++++++---- keyboards/alf/x2/keymaps/default/keymap.c | 57 +++++----- keyboards/alf/x2/keymaps/hhkb_60/keymap.c | 55 ++++++---- keyboards/alf/x2/readme.md | 12 ++- keyboards/alf/x2/rules.mk | 22 ++-- keyboards/alf/x2/x2.c | 16 +++ keyboards/alf/x2/x2.h | 122 ++++++---------------- 8 files changed, 228 insertions(+), 174 deletions(-) diff --git a/keyboards/alf/x2/config.h b/keyboards/alf/x2/config.h index 6c9a139c3a..2e545f1a5b 100644 --- a/keyboards/alf/x2/config.h +++ b/keyboards/alf/x2/config.h @@ -1,5 +1,20 @@ -#ifndef CONFIG_H -#define CONFIG_H +/* Copyright 2018-2021 @fixed, MechMerlin, QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once #include "config_common.h" @@ -22,6 +37,9 @@ /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW +#define LED_CAPS_LOCK_PIN B2 +#define LED_PIN_ON_STATE 0 + /* number of backlight levels */ #define BACKLIGHT_PIN B6 #ifdef BACKLIGHT_PIN @@ -45,5 +63,3 @@ #define RGBLIGHT_SAT_STEP 8 #define RGBLIGHT_VAL_STEP 8 #endif - -#endif diff --git a/keyboards/alf/x2/info.json b/keyboards/alf/x2/info.json index 7acb87e299..4a3cc839c9 100644 --- a/keyboards/alf/x2/info.json +++ b/keyboards/alf/x2/info.json @@ -1,30 +1,84 @@ { - "keyboard_name": "ALF X2", - "url": "", - "maintainer": "qmk", + "keyboard_name": "ALF X2", + "url": "", + "maintainer": "qmk", "layouts": { - "LAYOUT": { - "layout": [{"x":1.5, "y":0}, {"x":2.5, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"!", "x":1, "y":1}, {"label":"@", "x":2, "y":1}, {"label":"#", "x":3, "y":1}, {"label":"$", "x":4, "y":1}, {"label":"%", "x":5, "y":1}, {"label":"^", "x":6, "y":1}, {"label":"&", "x":7, "y":1}, {"label":"*", "x":8, "y":1}, {"label":"(", "x":9, "y":1}, {"label":")", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"|", "x":13.5, "y":2, "w":1.5}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"\"", "x":11.75, "y":3}, {"label":"Enter", "x":12.75, "y":3, "w":2.25}, {"x":0, "y":4}, {"x":1, "y":4}, {"label":"Z", "x":2, "y":4}, {"label":"X", "x":3, "y":4}, {"label":"C", "x":4, "y":4}, {"label":"V", "x":5, "y":4}, {"label":"B", "x":6, "y":4}, {"label":"N", "x":7, "y":4}, {"label":"M", "x":8, "y":4}, {"label":"<", "x":9, "y":4}, {"label":">", "x":10, "y":4}, {"label":"?", "x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"Win", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":6.25}, {"label":"Alt", "x":10, "y":5}, {"label":"Win", "x":11, "y":5}, {"label":"Menu", "x":12, "y":5}, {"label":"Ctrl", "x":13, "y":5}, {"x":14, "y":5}] - }, + "LAYOUT_all": { + "layout": [ + {"x":1.5, "y":0}, + {"x":2.5, "y":0}, - "LAYOUT_std_ansi": { - "layout": [{"x":1.5, "y":0}, {"x":2.5, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"!", "x":1, "y":1}, {"label":"@", "x":2, "y":1}, {"label":"#", "x":3, "y":1}, {"label":"$", "x":4, "y":1}, {"label":"%", "x":5, "y":1}, {"label":"^", "x":6, "y":1}, {"label":"&", "x":7, "y":1}, {"label":"*", "x":8, "y":1}, {"label":"(", "x":9, "y":1}, {"label":")", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"label":"Backspace", "x":13, "y":1, "w":2}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"|", "x":13.5, "y":2, "w":1.5}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"\"", "x":11.75, "y":3}, {"label":"Enter", "x":12.75, "y":3, "w":2.25}, {"label":"Shift", "x":0, "y":4, "w":2.25}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":"<", "x":9.25, "y":4}, {"label":">", "x":10.25, "y":4}, {"label":"?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":2.75}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"Win", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":6.25}, {"label":"Alt", "x":10, "y":5, "w":1.25}, {"label":"Win", "x":11.25, "y":5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5, "w":1.25}] - }, + {"label":"~", "x":0, "y":1}, + {"label":"!", "x":1, "y":1}, + {"label":"@", "x":2, "y":1}, + {"label":"#", "x":3, "y":1}, + {"label":"$", "x":4, "y":1}, + {"label":"%", "x":5, "y":1}, + {"label":"^", "x":6, "y":1}, + {"label":"&", "x":7, "y":1}, + {"label":"*", "x":8, "y":1}, + {"label":"(", "x":9, "y":1}, + {"label":")", "x":10, "y":1}, + {"label":"_", "x":11, "y":1}, + {"label":"+", "x":12, "y":1}, + {"x":13, "y":1}, + {"x":14, "y":1}, - "LAYOUT_std_splits": { - "layout": [{"x":1.5, "y":0}, {"x":2.5, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"!", "x":1, "y":1}, {"label":"@", "x":2, "y":1}, {"label":"#", "x":3, "y":1}, {"label":"$", "x":4, "y":1}, {"label":"%", "x":5, "y":1}, {"label":"^", "x":6, "y":1}, {"label":"&", "x":7, "y":1}, {"label":"*", "x":8, "y":1}, {"label":"(", "x":9, "y":1}, {"label":")", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"|", "x":13.5, "y":2, "w":1.5}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"\"", "x":11.75, "y":3}, {"label":"Enter", "x":12.75, "y":3, "w":2.25}, {"label":"Shift", "x":0, "y":4, "w":1.25}, {"x":1.25, "y":4}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":"<", "x":9.25, "y":4}, {"label":">", "x":10.25, "y":4}, {"label":"?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":1.75}, {"x":14, "y":4}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"Win", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":6.25}, {"label":"Alt", "x":10, "y":5, "w":1.25}, {"label":"Win", "x":11.25, "y":5, "w":1.25}, {"label":"Menu", "x":12.5, "y":5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5, "w":1.25}] - }, + {"label":"Tab", "x":0, "y":2, "w":1.5}, + {"label":"Q", "x":1.5, "y":2}, + {"label":"W", "x":2.5, "y":2}, + {"label":"E", "x":3.5, "y":2}, + {"label":"R", "x":4.5, "y":2}, + {"label":"T", "x":5.5, "y":2}, + {"label":"Y", "x":6.5, "y":2}, + {"label":"U", "x":7.5, "y":2}, + {"label":"I", "x":8.5, "y":2}, + {"label":"O", "x":9.5, "y":2}, + {"label":"P", "x":10.5, "y":2}, + {"label":"{", "x":11.5, "y":2}, + {"label":"}", "x":12.5, "y":2}, + {"label":"|", "x":13.5, "y":2, "w":1.5}, - "LAYOUT_hhkb": { - "layout": [{"x":1.5, "y":0}, {"x":2.5, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"!", "x":1, "y":1}, {"label":"@", "x":2, "y":1}, {"label":"#", "x":3, "y":1}, {"label":"$", "x":4, "y":1}, {"label":"%", "x":5, "y":1}, {"label":"^", "x":6, "y":1}, {"label":"&", "x":7, "y":1}, {"label":"*", "x":8, "y":1}, {"label":"(", "x":9, "y":1}, {"label":")", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"|", "x":13.5, "y":2, "w":1.5}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"\"", "x":11.75, "y":3}, {"label":"Enter", "x":12.75, "y":3, "w":2.25}, {"label":"Shift", "x":0, "y":4, "w":2.25}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":"<", "x":9.25, "y":4}, {"label":">", "x":10.25, "y":4}, {"label":"?", "x":11.25, "y":4}, {"label":"Shift", "x":12.25, "y":4, "w":1.75}, {"x":14, "y":4}, {"label":"Win", "x":1.5, "y":5, "w":1.25}, {"label":"Alt", "x":2.75, "y":5, "w":1.5}, {"x":4.25, "y":5, "w":6.25}, {"label":"Alt", "x":10.5, "y":5, "w":1.5}, {"label":"Win", "x":12, "y":5, "w":1.25}] - }, + {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, + {"label":"A", "x":1.75, "y":3}, + {"label":"S", "x":2.75, "y":3}, + {"label":"D", "x":3.75, "y":3}, + {"label":"F", "x":4.75, "y":3}, + {"label":"G", "x":5.75, "y":3}, + {"label":"H", "x":6.75, "y":3}, + {"label":"J", "x":7.75, "y":3}, + {"label":"K", "x":8.75, "y":3}, + {"label":"L", "x":9.75, "y":3}, + {"label":":", "x":10.75, "y":3}, + {"label":"\"", "x":11.75, "y":3}, + {"label":"Enter", "x":12.75, "y":3, "w":2.25}, - "LAYOUT_split_arrows": { - "layout": [{"x":1.5, "y":0}, {"x":2.5, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"!", "x":1, "y":1}, {"label":"@", "x":2, "y":1}, {"label":"#", "x":3, "y":1}, {"label":"$", "x":4, "y":1}, {"label":"%", "x":5, "y":1}, {"label":"^", "x":6, "y":1}, {"label":"&", "x":7, "y":1}, {"label":"*", "x":8, "y":1}, {"label":"(", "x":9, "y":1}, {"label":")", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"|", "x":13.5, "y":2, "w":1.5}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"\"", "x":11.75, "y":3}, {"label":"Enter", "x":12.75, "y":3, "w":2.25}, {"label":"Shift", "x":0, "y":4, "w":1.25}, {"x":1.25, "y":4}, {"label":"Z", "x":2.25, "y":4}, {"label":"X", "x":3.25, "y":4}, {"label":"C", "x":4.25, "y":4}, {"label":"V", "x":5.25, "y":4}, {"label":"B", "x":6.25, "y":4}, {"label":"N", "x":7.25, "y":4}, {"label":"M", "x":8.25, "y":4}, {"label":"<", "x":9.25, "y":4}, {"label":">", "x":10.25, "y":4}, {"label":"?", "x":11.25, "y":4, "w":1.75}, {"x":13, "y":4}, {"x":14, "y":4}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"Win", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":6.25}, {"label":"Alt", "x":10, "y":5}, {"label":"Win", "x":11, "y":5}, {"label":"Menu", "x":12, "y":5}, {"label":"Ctrl", "x":13, "y":5}, {"x":14, "y":5}] - }, + {"label":"Shift", "x":0, "y":4}, + {"x":1, "y":4}, + {"label":"Z", "x":2, "y":4}, + {"label":"X", "x":3, "y":4}, + {"label":"C", "x":4, "y":4}, + {"label":"V", "x":5, "y":4}, + {"label":"B", "x":6, "y":4}, + {"label":"N", "x":7, "y":4}, + {"label":"M", "x":8, "y":4}, + {"label":"<", "x":9, "y":4}, + {"label":">", "x":10, "y":4}, + {"label":"?", "x":11, "y":4}, + {"x":12, "y":4}, + {"x":13, "y":4}, + {"x":14, "y":4}, - "LAYOUT_2u_split_arrows": { - "layout": [{"x":1.5, "y":0}, {"x":2.5, "y":0}, {"label":"~", "x":0, "y":1}, {"label":"!", "x":1, "y":1}, {"label":"@", "x":2, "y":1}, {"label":"#", "x":3, "y":1}, {"label":"$", "x":4, "y":1}, {"label":"%", "x":5, "y":1}, {"label":"^", "x":6, "y":1}, {"label":"&", "x":7, "y":1}, {"label":"*", "x":8, "y":1}, {"label":"(", "x":9, "y":1}, {"label":")", "x":10, "y":1}, {"label":"_", "x":11, "y":1}, {"label":"+", "x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.5}, {"label":"Q", "x":1.5, "y":2}, {"label":"W", "x":2.5, "y":2}, {"label":"E", "x":3.5, "y":2}, {"label":"R", "x":4.5, "y":2}, {"label":"T", "x":5.5, "y":2}, {"label":"Y", "x":6.5, "y":2}, {"label":"U", "x":7.5, "y":2}, {"label":"I", "x":8.5, "y":2}, {"label":"O", "x":9.5, "y":2}, {"label":"P", "x":10.5, "y":2}, {"label":"{", "x":11.5, "y":2}, {"label":"}", "x":12.5, "y":2}, {"label":"|", "x":13.5, "y":2, "w":1.5}, {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, {"label":"A", "x":1.75, "y":3}, {"label":"S", "x":2.75, "y":3}, {"label":"D", "x":3.75, "y":3}, {"label":"F", "x":4.75, "y":3}, {"label":"G", "x":5.75, "y":3}, {"label":"H", "x":6.75, "y":3}, {"label":"J", "x":7.75, "y":3}, {"label":"K", "x":8.75, "y":3}, {"label":"L", "x":9.75, "y":3}, {"label":":", "x":10.75, "y":3}, {"label":"\"", "x":11.75, "y":3}, {"label":"Enter", "x":12.75, "y":3, "w":2.25}, {"label":"Shift", "x":0, "y":4}, {"x":1, "y":4}, {"label":"Z", "x":2, "y":4}, {"label":"X", "x":3, "y":4}, {"label":"C", "x":4, "y":4}, {"label":"V", "x":5, "y":4}, {"label":"B", "x":6, "y":4}, {"label":"N", "x":7, "y":4}, {"label":"M", "x":8, "y":4}, {"label":"<", "x":9, "y":4}, {"label":">", "x":10, "y":4}, {"label":"?", "x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}, {"label":"Ctrl", "x":0, "y":5, "w":1.25}, {"label":"Win", "x":1.25, "y":5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5, "w":1.25}, {"x":3.75, "y":5, "w":6.25}, {"label":"Alt", "x":10, "y":5}, {"label":"Win", "x":11, "y":5}, {"label":"Menu", "x":12, "y":5}, {"label":"Ctrl", "x":13, "y":5}, {"x":14, "y":5}] + {"label":"Ctrl", "x":0, "y":5, "w":1.25}, + {"label":"Win", "x":1.25, "y":5, "w":1.25}, + {"label":"Alt", "x":2.5, "y":5, "w":1.25}, + {"x":3.75, "y":5, "w":6.25}, + {"label":"Alt", "x":10, "y":5}, + {"label":"Win", "x":11, "y":5}, + {"label":"Menu", "x":12, "y":5}, + {"label":"Ctrl", "x":13, "y":5}, + {"x":14, "y":5} + ] } } } diff --git a/keyboards/alf/x2/keymaps/default/keymap.c b/keyboards/alf/x2/keymaps/default/keymap.c index a119c70742..5e0d69ada9 100644 --- a/keyboards/alf/x2/keymaps/default/keymap.c +++ b/keyboards/alf/x2/keymaps/default/keymap.c @@ -1,30 +1,39 @@ +/* Copyright 2018-2021 @fixed, MechMerlin, QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - LAYOUT( - KC_VOLU, KC_VOLD, - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_NO, KC_RSFT, KC_NO, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_NO, KC_APP, KC_RCTL), + [0] = LAYOUT_all( + KC_VOLU, KC_VOLD, + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, XXXXXXX, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, XXXXXXX, KC_RSFT, XXXXXXX, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), XXXXXXX, KC_APP, KC_RCTL + ), - LAYOUT( - KC_MNXT, KC_MPRV, - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, RESET, - KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_DOWN, KC_DOWN, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), -}; + [1] = LAYOUT_all( + KC_MNXT, KC_MPRV, + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, + _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, _______, RESET, + _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, _______, _______, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_END, KC_PGDN, KC_DOWN, KC_DOWN, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), -void led_set_user(uint8_t usb_led) { - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - setPinOutput(B2); - writePinLow(B2); - } else { - setPinInput(B2); - writePinLow(B2); - } -} +}; diff --git a/keyboards/alf/x2/keymaps/hhkb_60/keymap.c b/keyboards/alf/x2/keymaps/hhkb_60/keymap.c index 0abde6243a..1f46c22ade 100644 --- a/keyboards/alf/x2/keymaps/hhkb_60/keymap.c +++ b/keyboards/alf/x2/keymaps/hhkb_60/keymap.c @@ -1,28 +1,39 @@ +/* Copyright 2018-2021 @fixed, MechMerlin, QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - LAYOUT( - KC_VOLU, KC_VOLD, - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_NO, KC_RSFT, MO(1), - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_NO, KC_APP, KC_RCTL), + [0] = LAYOUT_all( + KC_VOLU, KC_VOLD, + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, XXXXXXX, KC_RSFT, MO(1), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, XXXXXXX, KC_APP, KC_RCTL + ), - LAYOUT( - KC_MNXT, KC_MPRV, - KC_NO, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, - KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, RESET, - KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_DOWN, KC_DOWN, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), -}; + [1] = LAYOUT_all( + KC_MNXT, KC_MPRV, + KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, + KC_CAPS, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, _______, RESET, + _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, _______, _______, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_END, KC_PGDN, KC_DOWN, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), -void led_set_user(uint8_t usb_led) { - if (usb_led & (1 << USB_LED_CAPS_LOCK)) { - DDRB |= (1 << 2); PORTB &= ~(1 << 2); - } else { - DDRB &= ~(1 << 2); PORTB &= ~(1 << 2); - } -} \ No newline at end of file +}; diff --git a/keyboards/alf/x2/readme.md b/keyboards/alf/x2/readme.md index b171b5c793..671155a341 100644 --- a/keyboards/alf/x2/readme.md +++ b/keyboards/alf/x2/readme.md @@ -4,12 +4,18 @@ A customizable 60% keyboard. -Keyboard Maintainer: QMK Community -Hardware Supported: ALF X2 60% -Hardware Availability: [zFrontier](https://en.zfrontier.com/products/group-buy-alf-x2-60) +* Keyboard Maintainer: [The QMK Community](https://github.com/qmk) +* Hardware Supported: ALF X2 60% +* Hardware Availability: [zFrontier](https://en.zfrontier.com/products/group-buy-alf-x2-60) Make example for this keyboard (after setting up your build environment): make alf/x2:default +Flashing example for this keyboard: + + make alf/x2:default:flash + +To reset the board into bootloader mode, hold Space+B while plugging it in. + See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/alf/x2/rules.mk b/keyboards/alf/x2/rules.mk index 89557e4ea7..c5e4effbac 100644 --- a/keyboards/alf/x2/rules.mk +++ b/keyboards/alf/x2/rules.mk @@ -5,15 +5,17 @@ MCU = atmega32u4 BOOTLOADER = atmel-dfu # Build Options -# comment out to disable the options. +# change yes to no to disable # BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -AUDIO_ENABLE = no -RGBLIGHT_ENABLE = yes +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/alf/x2/x2.c b/keyboards/alf/x2/x2.c index 111712f0b5..e4352296b9 100644 --- a/keyboards/alf/x2/x2.c +++ b/keyboards/alf/x2/x2.c @@ -1 +1,17 @@ +/* Copyright 2018 @fixed + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + #include "x2.h" diff --git a/keyboards/alf/x2/x2.h b/keyboards/alf/x2/x2.h index c6c587aea9..48683ea50b 100644 --- a/keyboards/alf/x2/x2.h +++ b/keyboards/alf/x2/x2.h @@ -1,98 +1,38 @@ -#ifndef X2_H -#define X2_H +/* Copyright 2018-2021 @fixed, MechMerlin, QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once #include "quantum.h" -// K404 and K408 are the microswitches at the top of the PCB +#define ___ KC_NO -#define LAYOUT( \ - K404, K408, \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \ - K100, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ - K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, \ - K400, K401, K403, K406, K410, K411, K412, K413, K414 \ -) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ - { K100, KC_NO, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ - { K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314 }, \ - { K400, K401, KC_NO, K403, K404, KC_NO, K406, KC_NO, K408, KC_NO, K410, K411, K412, K413, K414 } \ -} - -#define LAYOUT_std_ansi( \ - K404, K408, \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K014, \ - K100, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ - K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, \ - K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, \ - K400, K401, K403, K406, K410, K411, K413, K414 \ -) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, KC_NO, K014 }, \ - { K100, KC_NO, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ - { K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO }, \ - { K300, KC_NO, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, KC_NO }, \ - { K400, K401, KC_NO, K403, K404, KC_NO, K406, KC_NO, K408, KC_NO, K410, K411, KC_NO, K413, K414 } \ -} - -#define LAYOUT_std_splits( \ - K404, K408, \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \ - K100, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ - K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K314, \ - K400, K401, K403, K406, K410, K411, K413, K414 \ -) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ - { K100, KC_NO, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ - { K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, K314 }, \ - { K400, K401, KC_NO, K403, K404, KC_NO, K406, KC_NO, K408, KC_NO, K410, K411, KC_NO, K413, K414 } \ -} +// K44 and K48 are the microswitches at the top of the PCB -#define LAYOUT_hhkb( \ - K404, K408, \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \ - K100, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ - K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, \ - K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K314, \ - K401, K403, K406, K410, K411 \ +#define LAYOUT_all( \ + K44, K48, \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K43, K46, K4A, K4B, K4C, K4D, K4E \ ) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ - { K100, KC_NO, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ - { K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO }, \ - { K300, KC_NO, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, K314 }, \ - { KC_NO, K401, KC_NO, K403, K404, KC_NO, K406, KC_NO, K408, KC_NO, K410, K411, KC_NO, KC_NO, KC_NO } \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, ___, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, ___, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, ___ }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, K41, ___, K43, K44, ___, K46, ___, K48, ___, K4A, K4B, K4C, K4D, K4E } \ } - -#define LAYOUT_2u_split_arrows( \ - K404, K408, \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \ - K100, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ - K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, \ - K400, K401, K403, K406, K410, K411, K412, K413, K414 \ -) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ - { K100, KC_NO, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ - { K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314 }, \ - { K400, K401, KC_NO, K403, K404, KC_NO, K406, KC_NO, K408, KC_NO, K410, K411, K412, K413, K414 } \ -} - -#define LAYOUT_split_arrows( \ - K404, K408, \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \ - K100, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ - K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K314, \ - K400, K401, K403, K406, K410, K411, K412, K413, K414 \ -) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ - { K100, KC_NO, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ - { K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, K314 }, \ - { K400, K401, KC_NO, K403, K404, KC_NO, K406, KC_NO, K408, KC_NO, K410, K411, K412, K413, K414 } \ -} - -#endif From 4493a05b74d8852222faa776d140233745114c53 Mon Sep 17 00:00:00 2001 From: Stan Gurenkov Date: Fri, 24 Sep 2021 13:05:29 -0400 Subject: [PATCH 112/595] [Keyboard] refactor signum30 (#14527) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan Co-authored-by: Stan Gurenkov --- keyboards/signum/3_0/config.h | 32 +++++ keyboards/signum/3_0/elitec/config.h | 22 --- keyboards/signum/3_0/elitec/elitec.h | 13 +- keyboards/signum/3_0/elitec/rules.mk | 28 ---- keyboards/signum/3_0/{elitec => }/info.json | 0 .../keymaps/default/generate_km.py | 0 .../3_0/{elitec => }/keymaps/default/keymap.c | 0 .../keymaps/default/km_template.txt | 0 .../{elitec => }/keymaps/default/layout.py | 0 .../{elitec => }/keymaps/default/readme.md | 0 .../3_0/{elitec => }/keymaps/default/rules.mk | 0 .../signum/3_0/keymaps/sgurenkov/config.h | 45 ++++++ .../signum/3_0/keymaps/sgurenkov/keymap.c | 128 ++++++++++++++++++ .../signum/3_0/keymaps/sgurenkov/rules.mk | 2 + keyboards/signum/3_0/{elitec => }/readme.md | 1 + keyboards/signum/3_0/rules.mk | 28 ++++ keyboards/signum/3_0/signum.c | 16 +++ keyboards/signum/3_0/signum.h | 33 +++++ keyboards/signum/3_0/teensy/config.h | 23 ++++ keyboards/signum/3_0/teensy/rules.mk | 1 + keyboards/signum/3_0/teensy/teensy.c | 16 +++ keyboards/signum/3_0/teensy/teensy.h | 19 +++ 22 files changed, 345 insertions(+), 62 deletions(-) create mode 100644 keyboards/signum/3_0/config.h rename keyboards/signum/3_0/{elitec => }/info.json (100%) rename keyboards/signum/3_0/{elitec => }/keymaps/default/generate_km.py (100%) rename keyboards/signum/3_0/{elitec => }/keymaps/default/keymap.c (100%) rename keyboards/signum/3_0/{elitec => }/keymaps/default/km_template.txt (100%) rename keyboards/signum/3_0/{elitec => }/keymaps/default/layout.py (100%) rename keyboards/signum/3_0/{elitec => }/keymaps/default/readme.md (100%) rename keyboards/signum/3_0/{elitec => }/keymaps/default/rules.mk (100%) create mode 100644 keyboards/signum/3_0/keymaps/sgurenkov/config.h create mode 100644 keyboards/signum/3_0/keymaps/sgurenkov/keymap.c create mode 100644 keyboards/signum/3_0/keymaps/sgurenkov/rules.mk rename keyboards/signum/3_0/{elitec => }/readme.md (94%) create mode 100644 keyboards/signum/3_0/rules.mk create mode 100644 keyboards/signum/3_0/signum.c create mode 100644 keyboards/signum/3_0/signum.h create mode 100644 keyboards/signum/3_0/teensy/config.h create mode 100644 keyboards/signum/3_0/teensy/rules.mk create mode 100644 keyboards/signum/3_0/teensy/teensy.c create mode 100644 keyboards/signum/3_0/teensy/teensy.h diff --git a/keyboards/signum/3_0/config.h b/keyboards/signum/3_0/config.h new file mode 100644 index 0000000000..d0c3175d0f --- /dev/null +++ b/keyboards/signum/3_0/config.h @@ -0,0 +1,32 @@ +/* Copyright 2021 Stan Gurenkov + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Troy Fletcher +#define PRODUCT Signum30 + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW diff --git a/keyboards/signum/3_0/elitec/config.h b/keyboards/signum/3_0/elitec/config.h index f86e6748a4..fdbfac3c93 100644 --- a/keyboards/signum/3_0/elitec/config.h +++ b/keyboards/signum/3_0/elitec/config.h @@ -2,29 +2,7 @@ #include "config_common.h" -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xF1E7 -#define PRODUCT_ID 0x5163 -#define DEVICE_VER 0x0000 -#define MANUFACTURER troyfletcher -#define PRODUCT Signum - -/* mouse settings */ -#define MK_KINETIC_SPEED - -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 12 - /* key matrix pins */ #define MATRIX_ROW_PINS { D2, D1, F5, B5 } #define MATRIX_COL_PINS { B4, D7, D0, E6, D4, F6, F4, F7, B1, B3, C6, B2 } #define UNUSED_PINS - -#define DIODE_DIRECTION COL2ROW - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/signum/3_0/elitec/elitec.h b/keyboards/signum/3_0/elitec/elitec.h index d28d3d4769..7498fdcee3 100644 --- a/keyboards/signum/3_0/elitec/elitec.h +++ b/keyboards/signum/3_0/elitec/elitec.h @@ -1,15 +1,4 @@ #pragma once #include "quantum.h" - -#define LAYOUT_ortho_4x12( \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311 \ -) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011 }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111 }, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211 }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311 } \ -} +#include "signum.h" diff --git a/keyboards/signum/3_0/elitec/rules.mk b/keyboards/signum/3_0/elitec/rules.mk index 65714ef39d..e69de29bb2 100644 --- a/keyboards/signum/3_0/elitec/rules.mk +++ b/keyboards/signum/3_0/elitec/rules.mk @@ -1,28 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no -RGBLIGHT_ENABLE = no - -UNICODEMAP_ENABLE = no - -LAYOUTS = ortho_4x12 - -# Disable unsupported hardware -RGBLIGHT_SUPPORTED = no -AUDIO_SUPPORTED = no -BACKLIGHT_SUPPORTED = no diff --git a/keyboards/signum/3_0/elitec/info.json b/keyboards/signum/3_0/info.json similarity index 100% rename from keyboards/signum/3_0/elitec/info.json rename to keyboards/signum/3_0/info.json diff --git a/keyboards/signum/3_0/elitec/keymaps/default/generate_km.py b/keyboards/signum/3_0/keymaps/default/generate_km.py similarity index 100% rename from keyboards/signum/3_0/elitec/keymaps/default/generate_km.py rename to keyboards/signum/3_0/keymaps/default/generate_km.py diff --git a/keyboards/signum/3_0/elitec/keymaps/default/keymap.c b/keyboards/signum/3_0/keymaps/default/keymap.c similarity index 100% rename from keyboards/signum/3_0/elitec/keymaps/default/keymap.c rename to keyboards/signum/3_0/keymaps/default/keymap.c diff --git a/keyboards/signum/3_0/elitec/keymaps/default/km_template.txt b/keyboards/signum/3_0/keymaps/default/km_template.txt similarity index 100% rename from keyboards/signum/3_0/elitec/keymaps/default/km_template.txt rename to keyboards/signum/3_0/keymaps/default/km_template.txt diff --git a/keyboards/signum/3_0/elitec/keymaps/default/layout.py b/keyboards/signum/3_0/keymaps/default/layout.py similarity index 100% rename from keyboards/signum/3_0/elitec/keymaps/default/layout.py rename to keyboards/signum/3_0/keymaps/default/layout.py diff --git a/keyboards/signum/3_0/elitec/keymaps/default/readme.md b/keyboards/signum/3_0/keymaps/default/readme.md similarity index 100% rename from keyboards/signum/3_0/elitec/keymaps/default/readme.md rename to keyboards/signum/3_0/keymaps/default/readme.md diff --git a/keyboards/signum/3_0/elitec/keymaps/default/rules.mk b/keyboards/signum/3_0/keymaps/default/rules.mk similarity index 100% rename from keyboards/signum/3_0/elitec/keymaps/default/rules.mk rename to keyboards/signum/3_0/keymaps/default/rules.mk diff --git a/keyboards/signum/3_0/keymaps/sgurenkov/config.h b/keyboards/signum/3_0/keymaps/sgurenkov/config.h new file mode 100644 index 0000000000..5f8d0d02b8 --- /dev/null +++ b/keyboards/signum/3_0/keymaps/sgurenkov/config.h @@ -0,0 +1,45 @@ +/* Copyright 2021 Stan Gurenkov + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#define ONESHOT_TAP_TOGGLE 2 +#define ONESHOT_TIMEOUT 5000 +#define LEADER_TIMEOUT 600 +#define LEADER_PER_KEY_TIMING 300 + +// default but used in macros +#define TAPPING_TERM 300 + +// Prevent normal rollover on alphas from accidentally triggering mods. +#define IGNORE_MOD_TAP_INTERRUPT + +// Auto Shift and Retro Shift (Auto Shift for Tap Hold). +#define AUTO_SHIFT_TIMEOUT TAPPING_TERM + +// Recommended for heavy chording. +#define QMK_KEYS_PER_SCAN 4 + +// Mouse key speed and acceleration. +#undef MOUSEKEY_DELAY +#define MOUSEKEY_DELAY 0 +#undef MOUSEKEY_INTERVAL +#define MOUSEKEY_INTERVAL 16 +#undef MOUSEKEY_WHEEL_DELAY +#define MOUSEKEY_WHEEL_DELAY 0 +#undef MOUSEKEY_MAX_SPEED +#define MOUSEKEY_MAX_SPEED 6 +#undef MOUSEKEY_TIME_TO_MAX +#define MOUSEKEY_TIME_TO_MAX 64 diff --git a/keyboards/signum/3_0/keymaps/sgurenkov/keymap.c b/keyboards/signum/3_0/keymaps/sgurenkov/keymap.c new file mode 100644 index 0000000000..f6cdcfd247 --- /dev/null +++ b/keyboards/signum/3_0/keymaps/sgurenkov/keymap.c @@ -0,0 +1,128 @@ +/* Copyright 2021 Stan Gurenkov + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +#define M0(kc) MT(MOD_HYPR, kc) +#define M1(kc) MT(MOD_LGUI, kc) +#define M2(kc) MT(MOD_LCTL, kc) +#define M3(kc) MT(MOD_LALT, kc) +#define M4(kc) MT(MOD_LSFT, kc) +#define LTH1 LT(L_LEFT, KC_SPC) +#define LTH2 LT(L_NUM, KC_BSPC) +#define RTH1 LT(L_RIGHT, KC_SPC) +#define RTH2 LT(L_NUM, KC_ENT) +#define COPY LCMD(KC_C) +#define PASTE LCMD(KC_V) +// Layers +#define L_BASE 0 +#define L_LEFT 1 +#define L_RIGHT 2 +#define L_NUM 3 + +bool is_cmd_tab_active = false; + +enum custom_keycodes { + CMD_TAB = SAFE_RANGE, +}; +// clang-format off +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +// L_BASE + LAYOUT( + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, + KC_TAB, M4(KC_A), M3(KC_S), M2(KC_D), M1(KC_F), M0(KC_G), M0(KC_H), M1(KC_J), M2(KC_K), M3(KC_L), M4(KC_COLN), KC_QUOT, + KC_GRV, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, + OSM(MOD_LSFT), KC_LEAD, KC_LGUI, LTH1, XXXXXXX, LTH2, RTH2, XXXXXXX, RTH1, KC_RGUI, KC_LEAD, OSM(MOD_HYPR)), + +// L_LEFT + LAYOUT( + _______, XXXXXXX, XXXXXXX, KC_EQL, KC_PERC, KC_AT, COPY, KC_UNDS, KC_HASH, RALT(KC_SPC), KC_PLUS, _______, + _______, KC_LSHIFT, KC_LALT, KC_LCTL, KC_LGUI, KC_HYPR, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_LBRC, KC_RBRC, + _______, XXXXXXX, KC_EXLM, KC_CIRC, XXXXXXX, KC_HOME, KC_END, KC_MINS, KC_LPRN, KC_RPRN, PASTE, XXXXXXX, + _______, KC_BRID, KC_BRIU, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, _______), + +// L_RIGHT + LAYOUT( + _______, XXXXXXX, XXXXXXX, KC_EQL, KC_PERC, KC_AT, COPY, KC_UNDS, KC_HASH, RALT(KC_SPC), KC_PLUS, _______, + _______, KC_AMPR, KC_ASTR, KC_DLR, LGUI(KC_GRV), XXXXXXX, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, KC_RSFT, KC_RBRC, + _______, XXXXXXX, KC_EXLM, KC_CIRC, XXXXXXX, KC_HOME, KC_END, KC_MINS, KC_LPRN, KC_RPRN, PASTE, XXXXXXX, + _______, KC_BRID, KC_BRIU, _______, _______, _______, _______, _______, _______, KC_VOLD, KC_VOLU, _______), + +// L_NUM + LAYOUT( + _______, XXXXXXX, KC_F7, KC_F8, KC_F9, KC_F12, KC_MINS, KC_7, KC_8, KC_9, KC_COMM, _______, + _______, M4(KC_LSFT), M3(KC_F4), M2(KC_F5), M1(KC_F6), M0(KC_F11), M0(KC_DOT), M1(KC_4), M2(KC_5), M3(KC_6), M4(KC_0), _______, + _______, XXXXXXX, KC_F1, KC_F2, KC_F3, KC_F10, KC_PLUS, KC_1, KC_2, KC_3, KC_DOT, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MEDIA_PREV_TRACK , KC_MEDIA_NEXT_TRACK, KC_MEDIA_PLAY_PAUSE), + + LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), +}; +// clang-format on +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case CMD_TAB: + if (record->event.pressed) { + register_code(KC_LCMD); + tap_code(KC_TAB); + layer_on(2); + } else { + unregister_code(KC_LCMD); + layer_off(2); + } + break; + case KC_ESC: + layer_clear(); + } + return true; +} + +LEADER_EXTERNS(); + +void matrix_scan_user(void) { + LEADER_DICTIONARY() { + leading = false; + leader_end(); + + // Cancel task CTRL+C + SEQ_ONE_KEY(KC_C) { tap_code16(C(KC_C)); } + // copy + SEQ_ONE_KEY(KC_Y) { tap_code16(G(KC_C)); } + // cut + SEQ_ONE_KEY(KC_X) { tap_code16(G(KC_X)); } + // paste + SEQ_ONE_KEY(KC_P) { tap_code16(G(KC_V)); } + // undo + SEQ_ONE_KEY(KC_U) { tap_code16(G(KC_Z)); } + // redo + SEQ_ONE_KEY(KC_R) { tap_code16(S(G(KC_Z))); } + // delete line + SEQ_TWO_KEYS(KC_D, KC_D) { + register_code(KC_LGUI); + + tap_code(KC_RIGHT); + + tap_code(KC_BSPACE); + + unregister_code(KC_LGUI); + } + // go to the beginning of the string + SEQ_ONE_KEY(KC_H) { tap_code16(G(KC_LEFT)); } + // go to the end of the string + SEQ_ONE_KEY(KC_L) { tap_code16(G(KC_RIGHT)); } + } diff --git a/keyboards/signum/3_0/keymaps/sgurenkov/rules.mk b/keyboards/signum/3_0/keymaps/sgurenkov/rules.mk new file mode 100644 index 0000000000..5c9a4b49b7 --- /dev/null +++ b/keyboards/signum/3_0/keymaps/sgurenkov/rules.mk @@ -0,0 +1,2 @@ +LEADER_ENABLE = yes +AUTO_SHIFT_ENABLE = no diff --git a/keyboards/signum/3_0/elitec/readme.md b/keyboards/signum/3_0/readme.md similarity index 94% rename from keyboards/signum/3_0/elitec/readme.md rename to keyboards/signum/3_0/readme.md index f60023f6d5..3e937f771f 100644 --- a/keyboards/signum/3_0/elitec/readme.md +++ b/keyboards/signum/3_0/readme.md @@ -10,5 +10,6 @@ Hardware available here: [Troy Fletcher](http://troyfletcher.net/keyboard_sales. Make example for this keyboard (after setting up your build environment): make signum/3_0/elitec:default + make signum/3_0/teensy:default See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/signum/3_0/rules.mk b/keyboards/signum/3_0/rules.mk new file mode 100644 index 0000000000..a2f2bc9c01 --- /dev/null +++ b/keyboards/signum/3_0/rules.mk @@ -0,0 +1,28 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output + +LAYOUTS = ortho_4x12 + +# Disable unsupported hardware +RGBLIGHT_SUPPORTED = no +AUDIO_SUPPORTED = no +BACKLIGHT_SUPPORTED = no diff --git a/keyboards/signum/3_0/signum.c b/keyboards/signum/3_0/signum.c new file mode 100644 index 0000000000..b74bd52b28 --- /dev/null +++ b/keyboards/signum/3_0/signum.c @@ -0,0 +1,16 @@ +/* Copyright 2021 Stan Gurenkov + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "signum.h" diff --git a/keyboards/signum/3_0/signum.h b/keyboards/signum/3_0/signum.h new file mode 100644 index 0000000000..9322b44b8b --- /dev/null +++ b/keyboards/signum/3_0/signum.h @@ -0,0 +1,33 @@ +/* Copyright 2021 Stan Gurenkov + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" + +// clang-format off +# define LAYOUT( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211 }, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311 } \ +} +// clang-format on +#define LAYOUT_ortho_4x12 LAYOUT diff --git a/keyboards/signum/3_0/teensy/config.h b/keyboards/signum/3_0/teensy/config.h new file mode 100644 index 0000000000..343131fce0 --- /dev/null +++ b/keyboards/signum/3_0/teensy/config.h @@ -0,0 +1,23 @@ +/* Copyright 2021 Stan Gurenkov + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +/* key matrix pins */ +// clang-format off +#define MATRIX_ROW_PINS { B0, B3, F6, C7 } +#define MATRIX_COL_PINS { C6, D2, B7, D3, D0, F7, F5, B6, B5, B4, D1, D7 } +#define UNUSED_PINS +// clang-format on diff --git a/keyboards/signum/3_0/teensy/rules.mk b/keyboards/signum/3_0/teensy/rules.mk new file mode 100644 index 0000000000..8b13789179 --- /dev/null +++ b/keyboards/signum/3_0/teensy/rules.mk @@ -0,0 +1 @@ + diff --git a/keyboards/signum/3_0/teensy/teensy.c b/keyboards/signum/3_0/teensy/teensy.c new file mode 100644 index 0000000000..42e993a6be --- /dev/null +++ b/keyboards/signum/3_0/teensy/teensy.c @@ -0,0 +1,16 @@ +/* Copyright 2021 Stan Gurenkov + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "teensy.h" diff --git a/keyboards/signum/3_0/teensy/teensy.h b/keyboards/signum/3_0/teensy/teensy.h new file mode 100644 index 0000000000..ac02c3cbee --- /dev/null +++ b/keyboards/signum/3_0/teensy/teensy.h @@ -0,0 +1,19 @@ +/* Copyright 2021 Stan Gurenkov + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" +#include "signum.h" From 20d3dc0c836589edbf48d933b94059fc4fe538a1 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Fri, 24 Sep 2021 12:42:57 -0700 Subject: [PATCH 113/595] Patch for develop branch merge conflicts Fixes bugs introduced by 675c5a5e12f5c5efe59a0d0b30b17a41a398c74e. --- keyboards/amj96/amj96.h | 14 +++++++------- keyboards/plx/keymaps/default_all/keymap.c | 6 +++--- 2 files changed, 10 insertions(+), 10 deletions(-) diff --git a/keyboards/amj96/amj96.h b/keyboards/amj96/amj96.h index c50f6d17ff..bd4e688360 100644 --- a/keyboards/amj96/amj96.h +++ b/keyboards/amj96/amj96.h @@ -28,11 +28,11 @@ K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K5A, K5B, K5C, K5D, K5E, K5F, K0E, K07, \ K60, K61, K62, K63, K64, K65, K66, K68, K69, K6A, K6B, K6C \ ) { \ - { XXX, XXX, XXX, XXX, XXX, XXX, XXX, k07, XXX, k09, k0A, k0B, k0C, k0D, k0E, k0F }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k1F }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, k2F }, \ - { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, k3F }, \ - { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E, k4F }, \ - { k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k5A, k5B, k5C, k5D, k5E, k5F }, \ - { k60, k61, k62, k63, k64, k65, k66, XXX, k68, k69, k6A, k6B, k6C, k6D, k6E, k6F } \ + { XXX, XXX, XXX, XXX, XXX, XXX, XXX, K07, XXX, K09, K0A, K0B, K0C, K0D, K0E, K0F }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, K3F }, \ + { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E, K4F }, \ + { K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K5A, K5B, K5C, K5D, K5E, K5F }, \ + { K60, K61, K62, K63, K64, K65, K66, XXX, K68, K69, K6A, K6B, K6C, K6D, K6E, K6F } \ } diff --git a/keyboards/plx/keymaps/default_all/keymap.c b/keyboards/plx/keymaps/default_all/keymap.c index 40350c4759..97e234aa5b 100644 --- a/keyboards/plx/keymaps/default_all/keymap.c +++ b/keyboards/plx/keymaps/default_all/keymap.c @@ -23,7 +23,7 @@ enum layer_names { _MEDIA }; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_BASE] = LAYOUT( + [_BASE] = LAYOUT_all( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, @@ -31,7 +31,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL ), - [_FN] = LAYOUT( + [_FN] = LAYOUT_all( KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, @@ -39,7 +39,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______ ), - [_MEDIA] = LAYOUT( + [_MEDIA] = LAYOUT_all( KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, From e1dfbfbfd32e923e2bd499a324f18122a90ac998 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Fri, 24 Sep 2021 16:15:33 -0700 Subject: [PATCH 114/595] [Keyboard] Fix typo in mechloving adelais header files (#14590) --- keyboards/mechlovin/adelais/adelais.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/keyboards/mechlovin/adelais/adelais.h b/keyboards/mechlovin/adelais/adelais.h index 12af379c88..6c3980a090 100644 --- a/keyboards/mechlovin/adelais/adelais.h +++ b/keyboards/mechlovin/adelais/adelais.h @@ -26,7 +26,7 @@ #include "rev3.h" #elif KEYBOARD_mechlovin_adelais_standard_led_arm_rev2 #include "rev2.h" -#elif KEYBOARD_mechlovin_adelais_standard_led__armrev3 +#elif KEYBOARD_mechlovin_adelais_standard_led_arm_rev3 #include "rev3.h" #elif KEYBOARD_mechlovin_adelais_standard_led_arm_rev4 #include "rev4.h" From 3a2a39e5ecd43756b5df5e382bd02d9f41061c78 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Sat, 25 Sep 2021 00:19:41 +0100 Subject: [PATCH 115/595] Initial pass of F405 support (#14584) * Initial pass of F405 support * remove some conf files * docs * clang --- common_features.mk | 2 +- data/schemas/keyboard.jsonschema | 2 +- docs/compatible_microcontrollers.md | 1 + docs/ja/compatible_microcontrollers.md | 1 + .../onekey/stm32f405_feather/config.h | 25 ++ .../onekey/stm32f405_feather/readme.md | 7 + .../onekey/stm32f405_feather/rules.mk | 8 + .../GENERIC_STM32_F405XG/board/board.mk | 9 + .../GENERIC_STM32_F405XG/configs/board.h | 28 ++ .../GENERIC_STM32_F405XG/configs/config.h | 23 ++ .../GENERIC_STM32_F405XG/configs/mcuconf.h | 355 ++++++++++++++++++ .../chibios/boards/common/ld/STM32F405xG.ld | 86 +++++ quantum/mcu_selection.mk | 32 ++ tmk_core/common/chibios/eeprom_stm32_defs.h | 6 +- 14 files changed, 581 insertions(+), 4 deletions(-) create mode 100644 keyboards/handwired/onekey/stm32f405_feather/config.h create mode 100644 keyboards/handwired/onekey/stm32f405_feather/readme.md create mode 100644 keyboards/handwired/onekey/stm32f405_feather/rules.mk create mode 100644 platforms/chibios/boards/GENERIC_STM32_F405XG/board/board.mk create mode 100644 platforms/chibios/boards/GENERIC_STM32_F405XG/configs/board.h create mode 100644 platforms/chibios/boards/GENERIC_STM32_F405XG/configs/config.h create mode 100644 platforms/chibios/boards/GENERIC_STM32_F405XG/configs/mcuconf.h create mode 100644 platforms/chibios/boards/common/ld/STM32F405xG.ld diff --git a/common_features.mk b/common_features.mk index 8b5ee071d7..6193597174 100644 --- a/common_features.mk +++ b/common_features.mk @@ -183,7 +183,7 @@ else SRC += $(PLATFORM_COMMON_DIR)/eeprom_stm32.c SRC += $(PLATFORM_COMMON_DIR)/flash_stm32.c OPT_DEFS += -DEEPROM_EMU_STM32F072xB - else ifneq ($(filter $(MCU_SERIES)_$(MCU_LDSCRIPT),STM32F4xx_STM32F401xC STM32F4xx_STM32F411xE),) + else ifneq ($(filter $(MCU_SERIES)_$(MCU_LDSCRIPT),STM32F4xx_STM32F401xC STM32F4xx_STM32F411xE STM32F4xx_STM32F405xG),) OPT_DEFS += -DEEPROM_DRIVER COMMON_VPATH += $(DRIVER_PATH)/eeprom SRC += eeprom_driver.c diff --git a/data/schemas/keyboard.jsonschema b/data/schemas/keyboard.jsonschema index 15f407fce4..27507c78a3 100644 --- a/data/schemas/keyboard.jsonschema +++ b/data/schemas/keyboard.jsonschema @@ -13,7 +13,7 @@ }, "processor": { "type": "string", - "enum": ["cortex-m0", "cortex-m0plus", "cortex-m3", "cortex-m4", "MKL26Z64", "MK20DX128", "MK20DX256", "MK66F18", "STM32F042", "STM32F072", "STM32F103", "STM32F303", "STM32F401", "STM32F407", "STM32F411", "STM32F446", "STM32G431", "STM32G474", "STM32L412", "STM32L422", "STM32L433", "STM32L443", "atmega16u2", "atmega32u2", "atmega16u4", "atmega32u4", "at90usb162", "at90usb646", "at90usb647", "at90usb1286", "at90usb1287", "atmega32a", "atmega328p", "atmega328", "attiny85", "unknown"] + "enum": ["cortex-m0", "cortex-m0plus", "cortex-m3", "cortex-m4", "MKL26Z64", "MK20DX128", "MK20DX256", "MK66F18", "STM32F042", "STM32F072", "STM32F103", "STM32F303", "STM32F401", "STM32F405", "STM32F407", "STM32F411", "STM32F446", "STM32G431", "STM32G474", "STM32L412", "STM32L422", "STM32L433", "STM32L443", "atmega16u2", "atmega32u2", "atmega16u4", "atmega32u4", "at90usb162", "at90usb646", "at90usb647", "at90usb1286", "at90usb1287", "atmega32a", "atmega328p", "atmega328", "attiny85", "unknown"] }, "audio": { "type": "object", diff --git a/docs/compatible_microcontrollers.md b/docs/compatible_microcontrollers.md index 2bf3b0ebb7..0ad5d48214 100644 --- a/docs/compatible_microcontrollers.md +++ b/docs/compatible_microcontrollers.md @@ -27,6 +27,7 @@ You can also use any ARM chip with USB that [ChibiOS](https://www.chibios.org) s * [STM32F103](https://www.st.com/en/microcontrollers-microprocessors/stm32f103.html) * [STM32F303](https://www.st.com/en/microcontrollers-microprocessors/stm32f303.html) * [STM32F401](https://www.st.com/en/microcontrollers-microprocessors/stm32f401.html) + * [STM32F405](https://www.st.com/en/microcontrollers-microprocessors/stm32f405-415.html) * [STM32F407](https://www.st.com/en/microcontrollers-microprocessors/stm32f407-417.html) * [STM32F411](https://www.st.com/en/microcontrollers-microprocessors/stm32f411.html) * [STM32F446](https://www.st.com/en/microcontrollers-microprocessors/stm32f446.html) diff --git a/docs/ja/compatible_microcontrollers.md b/docs/ja/compatible_microcontrollers.md index 7a3484fa8c..23f32bbb60 100644 --- a/docs/ja/compatible_microcontrollers.md +++ b/docs/ja/compatible_microcontrollers.md @@ -32,6 +32,7 @@ QMK は十分な容量のフラッシュメモリを備えた USB 対応 AVR ま * [STM32F103](https://www.st.com/en/microcontrollers-microprocessors/stm32f103.html) * [STM32F303](https://www.st.com/en/microcontrollers-microprocessors/stm32f303.html) * [STM32F401](https://www.st.com/en/microcontrollers-microprocessors/stm32f401.html) +* [STM32F405](https://www.st.com/en/microcontrollers-microprocessors/stm32f405-415.html) * [STM32F407](https://www.st.com/en/microcontrollers-microprocessors/stm32f407-417.html) * [STM32F411](https://www.st.com/en/microcontrollers-microprocessors/stm32f411.html) * [STM32F446](https://www.st.com/en/microcontrollers-microprocessors/stm32f446.html) diff --git a/keyboards/handwired/onekey/stm32f405_feather/config.h b/keyboards/handwired/onekey/stm32f405_feather/config.h new file mode 100644 index 0000000000..32d7807975 --- /dev/null +++ b/keyboards/handwired/onekey/stm32f405_feather/config.h @@ -0,0 +1,25 @@ +/* Copyright 2019 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "config_common.h" + +#define PRODUCT Onekey Adafruit Feather STM32F405 + +#define MATRIX_COL_PINS { C2 } +#define MATRIX_ROW_PINS { C3 } +#define UNUSED_PINS diff --git a/keyboards/handwired/onekey/stm32f405_feather/readme.md b/keyboards/handwired/onekey/stm32f405_feather/readme.md new file mode 100644 index 0000000000..49a05725d5 --- /dev/null +++ b/keyboards/handwired/onekey/stm32f405_feather/readme.md @@ -0,0 +1,7 @@ +# Adafruit Feather STM32F405 Express onekey + +* Supported Hardware: [Adafruit Feather STM32F405 Express](https://www.adafruit.com/product/4382) + +To trigger keypress, short together pins *GPIO 12 / PC2* and *GPIO 11 / PC3*. + +https://learn.adafruit.com/adafruit-stm32f405-feather-express/dfu-bootloader-details#enabling-dfu-bootloader-mode-3045622-2 \ No newline at end of file diff --git a/keyboards/handwired/onekey/stm32f405_feather/rules.mk b/keyboards/handwired/onekey/stm32f405_feather/rules.mk new file mode 100644 index 0000000000..bff7a7e297 --- /dev/null +++ b/keyboards/handwired/onekey/stm32f405_feather/rules.mk @@ -0,0 +1,8 @@ +# MCU name +MCU = STM32F405 + +# Bootloader selection +BOOTLOADER = stm32-dfu + +# Enter lower-power sleep mode when on the ChibiOS idle thread +OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/platforms/chibios/boards/GENERIC_STM32_F405XG/board/board.mk b/platforms/chibios/boards/GENERIC_STM32_F405XG/board/board.mk new file mode 100644 index 0000000000..6c837bb8ee --- /dev/null +++ b/platforms/chibios/boards/GENERIC_STM32_F405XG/board/board.mk @@ -0,0 +1,9 @@ +# List of all the board related files. +BOARDSRC = $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY/board.c + +# Required include directories +BOARDINC = $(CHIBIOS)/os/hal/boards/ST_STM32F4_DISCOVERY + +# Shared variables +ALLCSRC += $(BOARDSRC) +ALLINC += $(BOARDINC) \ No newline at end of file diff --git a/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/board.h b/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/board.h new file mode 100644 index 0000000000..8cb771bc12 --- /dev/null +++ b/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/board.h @@ -0,0 +1,28 @@ +/* Copyright 2020 Nick Brassel (tzarc) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#define STM32_HSECLK 12000000 +// The following is required to disable the pull-down on PA9, when PA9 is used for the keyboard matrix: +#define BOARD_OTG_NOVBUSSENS + +#include_next "board.h" + +#undef STM32_HSE_BYPASS + +#undef STM32F407xx +#define STM32F405xG +#define STM32F405xx diff --git a/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/config.h b/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/config.h new file mode 100644 index 0000000000..cc52a953ed --- /dev/null +++ b/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/config.h @@ -0,0 +1,23 @@ +/* Copyright 2021 Andrei Purdea + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +/* Address for jumping to bootloader on STM32 chips. */ +/* It is chip dependent, the correct number can be looked up by checking against ST's application note AN2606. + */ +#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000 +#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP +# define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE +#endif diff --git a/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/mcuconf.h new file mode 100644 index 0000000000..d2ec632d9f --- /dev/null +++ b/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/mcuconf.h @@ -0,0 +1,355 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +/* + * STM32F4xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F4xx_MCUCONF +#define STM32F405_MCUCONF +#define STM32F415_MCUCONF +#define STM32F407_MCUCONF +#define STM32F417_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_BKPRAM_ENABLE FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_CLOCK48_REQUIRED TRUE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLM_VALUE 12 +#define STM32_PLLN_VALUE 336 +#define STM32_PLLP_VALUE 2 +#define STM32_PLLQ_VALUE 7 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV4 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_RTCPRE_VALUE 8 +#define STM32_MCO1SEL STM32_MCO1SEL_HSI +#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 +#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK +#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 +#define STM32_I2SSRC STM32_I2SSRC_CKIN +#define STM32_PLLI2SN_VALUE 192 +#define STM32_PLLI2SR_VALUE 5 + +/* + * IRQ system settings. + */ +#define STM32_IRQ_EXTI0_PRIORITY 6 +#define STM32_IRQ_EXTI1_PRIORITY 6 +#define STM32_IRQ_EXTI2_PRIORITY 6 +#define STM32_IRQ_EXTI3_PRIORITY 6 +#define STM32_IRQ_EXTI4_PRIORITY 6 +#define STM32_IRQ_EXTI5_9_PRIORITY 6 +#define STM32_IRQ_EXTI10_15_PRIORITY 6 +#define STM32_IRQ_EXTI16_PRIORITY 6 +#define STM32_IRQ_EXTI17_PRIORITY 15 +#define STM32_IRQ_EXTI18_PRIORITY 6 +#define STM32_IRQ_EXTI19_PRIORITY 6 +#define STM32_IRQ_EXTI20_PRIORITY 6 +#define STM32_IRQ_EXTI21_PRIORITY 15 +#define STM32_IRQ_EXTI22_PRIORITY 15 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_USE_ADC2 FALSE +#define STM32_ADC_USE_ADC3 FALSE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) +#define STM32_ADC_ADC2_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_ADC_ADC3_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_ADC2_DMA_PRIORITY 2 +#define STM32_ADC_ADC3_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 6 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC2_DMA_IRQ_PRIORITY 6 +#define STM32_ADC_ADC3_DMA_IRQ_PRIORITY 6 + +/* + * CAN driver system settings. + */ +#define STM32_CAN_USE_CAN1 FALSE +#define STM32_CAN_USE_CAN2 FALSE +#define STM32_CAN_CAN1_IRQ_PRIORITY 11 +#define STM32_CAN_CAN2_IRQ_PRIORITY 11 + +/* + * DAC driver system settings. + */ +#define STM32_DAC_DUAL_MODE FALSE +#define STM32_DAC_USE_DAC1_CH1 FALSE +#define STM32_DAC_USE_DAC1_CH2 FALSE +#define STM32_DAC_DAC1_CH1_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH2_IRQ_PRIORITY 10 +#define STM32_DAC_DAC1_CH1_DMA_PRIORITY 2 +#define STM32_DAC_DAC1_CH2_DMA_PRIORITY 2 +#define STM32_DAC_DAC1_CH1_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_DAC_DAC1_CH2_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 FALSE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM6 FALSE +#define STM32_GPT_USE_TIM7 FALSE +#define STM32_GPT_USE_TIM8 FALSE +#define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM11 FALSE +#define STM32_GPT_USE_TIM12 FALSE +#define STM32_GPT_USE_TIM14 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM6_IRQ_PRIORITY 7 +#define STM32_GPT_TIM7_IRQ_PRIORITY 7 +#define STM32_GPT_TIM8_IRQ_PRIORITY 7 +#define STM32_GPT_TIM9_IRQ_PRIORITY 7 +#define STM32_GPT_TIM11_IRQ_PRIORITY 7 +#define STM32_GPT_TIM12_IRQ_PRIORITY 7 +#define STM32_GPT_TIM14_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 FALSE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_USE_I2C3 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C3_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_I2C3_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * I2S driver system settings. + */ +#define STM32_I2S_USE_SPI2 FALSE +#define STM32_I2S_USE_SPI3 FALSE +#define STM32_I2S_SPI2_IRQ_PRIORITY 10 +#define STM32_I2S_SPI3_IRQ_PRIORITY 10 +#define STM32_I2S_SPI2_DMA_PRIORITY 1 +#define STM32_I2S_SPI3_DMA_PRIORITY 1 +#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM8 FALSE +#define STM32_ICU_USE_TIM9 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM8_IRQ_PRIORITY 7 +#define STM32_ICU_TIM9_IRQ_PRIORITY 7 + +/* + * MAC driver system settings. + */ +#define STM32_MAC_TRANSMIT_BUFFERS 2 +#define STM32_MAC_RECEIVE_BUFFERS 4 +#define STM32_MAC_BUFFERS_SIZE 1522 +#define STM32_MAC_PHY_TIMEOUT 100 +#define STM32_MAC_ETH1_CHANGE_PHY_STATE TRUE +#define STM32_MAC_ETH1_IRQ_PRIORITY 13 +#define STM32_MAC_IP_CHECKSUM_OFFLOAD 0 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM8 FALSE +#define STM32_PWM_USE_TIM9 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM8_IRQ_PRIORITY 7 +#define STM32_PWM_TIM9_IRQ_PRIORITY 7 + +/* + * RTC driver system settings. + */ +#define STM32_RTC_PRESA_VALUE 32 +#define STM32_RTC_PRESS_VALUE 1024 +#define STM32_RTC_CR_INIT 0 +#define STM32_RTC_TAMPCR_INIT 0 + +/* + * SDC driver system settings. + */ +#define STM32_SDC_SDIO_DMA_PRIORITY 3 +#define STM32_SDC_SDIO_IRQ_PRIORITY 9 +#define STM32_SDC_WRITE_TIMEOUT_MS 1000 +#define STM32_SDC_READ_TIMEOUT_MS 1000 +#define STM32_SDC_CLOCK_ACTIVATION_DELAY 10 +#define STM32_SDC_SDIO_UNALIGNED_SUPPORT TRUE +#define STM32_SDC_SDIO_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART3 FALSE +#define STM32_SERIAL_USE_UART4 FALSE +#define STM32_SERIAL_USE_UART5 FALSE +#define STM32_SERIAL_USE_USART6 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART3_PRIORITY 12 +#define STM32_SERIAL_UART4_PRIORITY 12 +#define STM32_SERIAL_UART5_PRIORITY 12 +#define STM32_SERIAL_USART6_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 FALSE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART3 FALSE +#define STM32_UART_USE_UART4 FALSE +#define STM32_UART_USE_UART5 FALSE +#define STM32_UART_USE_USART6 FALSE +#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_UART_USART3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) +#define STM32_UART_USART3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_UART_UART5_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART3_IRQ_PRIORITY 12 +#define STM32_UART_UART4_IRQ_PRIORITY 12 +#define STM32_UART_UART5_IRQ_PRIORITY 12 +#define STM32_UART_USART6_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART3_DMA_PRIORITY 0 +#define STM32_UART_UART4_DMA_PRIORITY 0 +#define STM32_UART_UART5_DMA_PRIORITY 0 +#define STM32_UART_USART6_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_OTG1 TRUE +#define STM32_USB_USE_OTG2 FALSE +#define STM32_USB_OTG1_IRQ_PRIORITY 14 +#define STM32_USB_OTG2_IRQ_PRIORITY 14 +#define STM32_USB_OTG1_RX_FIFO_SIZE 512 +#define STM32_USB_OTG2_RX_FIFO_SIZE 1024 +#define STM32_USB_HOST_WAKEUP_DURATION 2 + +#define STM32_USB_OTG_THREAD_PRIO NORMALPRIO+1 +#define STM32_USB_OTG_THREAD_STACK_SIZE 128 + +/* + * WDG driver system settings. + */ +#define STM32_WDG_USE_IWDG FALSE + +#endif /* MCUCONF_H */ diff --git a/platforms/chibios/boards/common/ld/STM32F405xG.ld b/platforms/chibios/boards/common/ld/STM32F405xG.ld new file mode 100644 index 0000000000..b7d0baa210 --- /dev/null +++ b/platforms/chibios/boards/common/ld/STM32F405xG.ld @@ -0,0 +1,86 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F405xG memory setup. + * Note: Use of ram1 and ram2 is mutually exclusive with use of ram0. + */ +MEMORY +{ + flash0 (rx) : org = 0x08000000, len = 16k /* Sector 0 - Init code as ROM bootloader assumes application starts here */ + flash1 (rx) : org = 0x08004000, len = 16k /* Sector 1 - Emulated eeprom */ + flash2 (rx) : org = 0x08008000, len = 1M - 32k /* Sector 2..6 - Rest of firmware */ + flash3 (rx) : org = 0x00000000, len = 0 + flash4 (rx) : org = 0x00000000, len = 0 + flash5 (rx) : org = 0x00000000, len = 0 + flash6 (rx) : org = 0x00000000, len = 0 + flash7 (rx) : org = 0x00000000, len = 0 + ram0 (wx) : org = 0x20000000, len = 128k /* SRAM1 + SRAM2 */ + ram1 (wx) : org = 0x20000000, len = 112k /* SRAM1 */ + ram2 (wx) : org = 0x2001C000, len = 16k /* SRAM2 */ + ram3 (wx) : org = 0x00000000, len = 0 + ram4 (wx) : org = 0x10000000, len = 64k /* CCM SRAM */ + ram5 (wx) : org = 0x40024000, len = 4k /* BCKP SRAM */ + ram6 (wx) : org = 0x00000000, len = 0 + ram7 (wx) : org = 0x00000000, len = 0 +} + +/* For each data/text section two region are defined, a virtual region + and a load region (_LMA suffix).*/ + +/* Flash region to be used for exception vectors.*/ +REGION_ALIAS("VECTORS_FLASH", flash0); +REGION_ALIAS("VECTORS_FLASH_LMA", flash0); + +/* Flash region to be used for constructors and destructors.*/ +REGION_ALIAS("XTORS_FLASH", flash2); +REGION_ALIAS("XTORS_FLASH_LMA", flash2); + +/* Flash region to be used for code text.*/ +REGION_ALIAS("TEXT_FLASH", flash2); +REGION_ALIAS("TEXT_FLASH_LMA", flash2); + +/* Flash region to be used for read only data.*/ +REGION_ALIAS("RODATA_FLASH", flash2); +REGION_ALIAS("RODATA_FLASH_LMA", flash2); + +/* Flash region to be used for various.*/ +REGION_ALIAS("VARIOUS_FLASH", flash2); +REGION_ALIAS("VARIOUS_FLASH_LMA", flash2); + +/* Flash region to be used for RAM(n) initialization data.*/ +REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2); + +/* RAM region to be used for Main stack. This stack accommodates the processing + of all exceptions and interrupts.*/ +REGION_ALIAS("MAIN_STACK_RAM", ram0); + +/* RAM region to be used for the process stack. This is the stack used by + the main() function.*/ +REGION_ALIAS("PROCESS_STACK_RAM", ram0); + +/* RAM region to be used for data segment.*/ +REGION_ALIAS("DATA_RAM", ram0); +REGION_ALIAS("DATA_RAM_LMA", flash2); + +/* RAM region to be used for BSS segment.*/ +REGION_ALIAS("BSS_RAM", ram0); + +/* RAM region to be used for the default heap.*/ +REGION_ALIAS("HEAP_RAM", ram0); + +/* Generic rules inclusion.*/ +INCLUDE rules.ld diff --git a/quantum/mcu_selection.mk b/quantum/mcu_selection.mk index f7eaeec8ac..48c53e4da6 100644 --- a/quantum/mcu_selection.mk +++ b/quantum/mcu_selection.mk @@ -273,6 +273,38 @@ ifneq ($(findstring STM32F401, $(MCU)),) UF2_FAMILY ?= STM32F4 endif +ifneq ($(findstring STM32F405, $(MCU)),) + # Cortex version + MCU = cortex-m4 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = STM32 + MCU_SERIES = STM32F4xx + + # Linker script to use + # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ + # or /ld/ + MCU_LDSCRIPT ?= STM32F405xG + + # Startup code to use + # - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= stm32f4xx + + # Board: it should exist either in /os/hal/boards/, + # /boards/, or drivers/boards/ + BOARD ?= GENERIC_STM32_F405XG + + USE_FPU ?= yes + + # UF2 settings + UF2_FAMILY ?= STM32F4 +endif + ifneq ($(findstring STM32F407, $(MCU)),) # Cortex version MCU = cortex-m4 diff --git a/tmk_core/common/chibios/eeprom_stm32_defs.h b/tmk_core/common/chibios/eeprom_stm32_defs.h index 57de42c6ba..cc64cda748 100644 --- a/tmk_core/common/chibios/eeprom_stm32_defs.h +++ b/tmk_core/common/chibios/eeprom_stm32_defs.h @@ -32,7 +32,7 @@ # ifndef FEE_PAGE_COUNT # define FEE_PAGE_COUNT 4 // How many pages are used # endif -# elif defined(STM32F401xC) || defined(STM32F411xE) +# elif defined(STM32F401xC) || defined(STM32F405xG) || defined(STM32F411xE) # ifndef FEE_PAGE_SIZE # define FEE_PAGE_SIZE 0x4000 // Page size = 16KByte # endif @@ -51,12 +51,14 @@ # define FEE_MCU_FLASH_SIZE 256 // Size in Kb # elif defined(STM32F103xE) || defined(STM32F411xE) # define FEE_MCU_FLASH_SIZE 512 // Size in Kb +# elif defined(STM32F405xG) +# define FEE_MCU_FLASH_SIZE 1024 // Size in Kb # endif #endif /* Start of the emulated eeprom */ #if !defined(FEE_PAGE_BASE_ADDRESS) -# if defined(STM32F401xC) || defined(STM32F411xE) +# if defined(STM32F401xC) || defined(STM32F405xG) || defined(STM32F411xE) # ifndef FEE_PAGE_BASE_ADDRESS # define FEE_PAGE_BASE_ADDRESS 0x08004000 // bodge to force 2nd 16k page # endif From 9e87b47a9cc0e560258009bc2448dc3e43c369b5 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Fri, 24 Sep 2021 23:28:25 +0000 Subject: [PATCH 116/595] Aozora Hotswap info.json clean-up (#14585) * clean up info.json * correct maintainer field to use GitHub username * remove `meta` key * clean up readme.md * correct key count in intro paragraph --- keyboards/aozora/hotswap/info.json | 3 +-- keyboards/aozora/hotswap/readme.md | 4 ++-- 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/keyboards/aozora/hotswap/info.json b/keyboards/aozora/hotswap/info.json index 0d670f2c78..dbceb3b371 100644 --- a/keyboards/aozora/hotswap/info.json +++ b/keyboards/aozora/hotswap/info.json @@ -1,7 +1,7 @@ { "keyboard_name": "Aozora", "url": "https://salmoncat.studio/pages/aozora-%E9%9D%92%E7%A9%BA-6-9-21-7-10-21", - "maintainer": "Food", + "maintainer": "Phooood", "layouts": { "LAYOUT": { "layout": [ @@ -77,5 +77,4 @@ ] } } - ,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/" } diff --git a/keyboards/aozora/hotswap/readme.md b/keyboards/aozora/hotswap/readme.md index 201ae3a738..157b58c0b8 100644 --- a/keyboards/aozora/hotswap/readme.md +++ b/keyboards/aozora/hotswap/readme.md @@ -1,6 +1,6 @@ # Aozora -A 65%-Style 6-Key keyboard featuring a cloud-shaped badge. +A 65%-style 69-key keyboard featuring a cloud-shaped badge. ![SCS Aozora](https://i.imgur.com/dL5nonc.jpg) @@ -14,4 +14,4 @@ Make example for this keyboard (after setting up your build environment): To reset, press the button on the back of the PCB. -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). \ No newline at end of file +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). From 216620ee769a97179074d8297998d9ea914f0c4e Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Fri, 24 Sep 2021 23:29:08 +0000 Subject: [PATCH 117/595] tidy up Clawsome Boards info.json files (#14586) * removes `meta` field * changes `maintainer` field to use GitHub username --- keyboards/clawsome/bookerboard/info.json | 3 +-- keyboards/clawsome/coupe/info.json | 2 +- keyboards/clawsome/doodle/info.json | 2 +- keyboards/clawsome/fightpad/info.json | 2 +- keyboards/clawsome/gamebuddy/v1_0/info.json | 3 +-- keyboards/clawsome/gamebuddy/v1_m/info.json | 2 +- keyboards/clawsome/hatchback/info.json | 2 +- keyboards/clawsome/numeros/info.json | 3 +-- keyboards/clawsome/roadster/info.json | 2 +- keyboards/clawsome/sedan/info.json | 2 +- keyboards/clawsome/sidekick/info.json | 2 +- keyboards/clawsome/suv/info.json | 2 +- 12 files changed, 12 insertions(+), 15 deletions(-) diff --git a/keyboards/clawsome/bookerboard/info.json b/keyboards/clawsome/bookerboard/info.json index fa8ff6a6a0..3e1eae3d21 100644 --- a/keyboards/clawsome/bookerboard/info.json +++ b/keyboards/clawsome/bookerboard/info.json @@ -1,7 +1,7 @@ { "keyboard_name": "bookerboard", "url": "", - "maintainer": "qmk", + "maintainer": "AlisGraveNil", "layouts": { "LAYOUT": { "layout": [ @@ -20,5 +20,4 @@ ] } } - ,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/" } diff --git a/keyboards/clawsome/coupe/info.json b/keyboards/clawsome/coupe/info.json index ef1f255c6c..5c66544252 100644 --- a/keyboards/clawsome/coupe/info.json +++ b/keyboards/clawsome/coupe/info.json @@ -1,7 +1,7 @@ { "keyboard_name": "Coupe", "url": "www.clawboards.xyz", - "maintainer": "AAClawson (AlisGraveNil)", + "maintainer": "AlisGraveNil", "layouts": { "LAYOUT_60_ansi": { "layout": [ diff --git a/keyboards/clawsome/doodle/info.json b/keyboards/clawsome/doodle/info.json index 1753ddf309..df9ca13834 100644 --- a/keyboards/clawsome/doodle/info.json +++ b/keyboards/clawsome/doodle/info.json @@ -1,7 +1,7 @@ { "keyboard_name": "doodle", "url": "www.clawboards.xyz", - "maintainer": "AAClawson (AlisGraveNil)", + "maintainer": "AlisGraveNil", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/clawsome/fightpad/info.json b/keyboards/clawsome/fightpad/info.json index c97c63cdad..5d52c0ce87 100644 --- a/keyboards/clawsome/fightpad/info.json +++ b/keyboards/clawsome/fightpad/info.json @@ -1,7 +1,7 @@ { "keyboard_name": "FightPad", "url": "www.clawboards.xyz", - "maintainer": "AAClawson (AlisGraveNil)", + "maintainer": "AlisGraveNil", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/clawsome/gamebuddy/v1_0/info.json b/keyboards/clawsome/gamebuddy/v1_0/info.json index 2c719d6a0e..dc9c56587e 100644 --- a/keyboards/clawsome/gamebuddy/v1_0/info.json +++ b/keyboards/clawsome/gamebuddy/v1_0/info.json @@ -1,7 +1,7 @@ { "keyboard_name": "GameBuddy1_0", "url": "www.clawboards.xyz", - "maintainer": "AA Clawson (AlisGraveNil)", + "maintainer": "AlisGraveNil", "layouts": { "LAYOUT": { "layout": [ @@ -34,5 +34,4 @@ ] } } - ,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/" } diff --git a/keyboards/clawsome/gamebuddy/v1_m/info.json b/keyboards/clawsome/gamebuddy/v1_m/info.json index 11add7a303..57b970e146 100644 --- a/keyboards/clawsome/gamebuddy/v1_m/info.json +++ b/keyboards/clawsome/gamebuddy/v1_m/info.json @@ -1,7 +1,7 @@ { "keyboard_name": "GameBuddy1_M", "url": "www.clawboards.xyz", - "maintainer": "AAClawson (AlisGraveNil)", + "maintainer": "AlisGraveNil", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/clawsome/hatchback/info.json b/keyboards/clawsome/hatchback/info.json index f76500713f..94e350b4b1 100644 --- a/keyboards/clawsome/hatchback/info.json +++ b/keyboards/clawsome/hatchback/info.json @@ -1,7 +1,7 @@ { "keyboard_name": "hatchbackTKL", "url": "www.clawboards.xyz", - "maintainer": "AAClawson (AlisGraveNil)", + "maintainer": "AlisGraveNil", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/clawsome/numeros/info.json b/keyboards/clawsome/numeros/info.json index 6b3a7a1150..4d9f59e553 100644 --- a/keyboards/clawsome/numeros/info.json +++ b/keyboards/clawsome/numeros/info.json @@ -1,7 +1,7 @@ { "keyboard_name": "numeros", "url": "www.clawboards.xyz", - "maintainer": "AAClawson (AlisGraveNil)", + "maintainer": "AlisGraveNil", "layouts": { "LAYOUT_numpad_5x4": { "layout": [ @@ -29,5 +29,4 @@ ] } } - ,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/" } diff --git a/keyboards/clawsome/roadster/info.json b/keyboards/clawsome/roadster/info.json index 22ff0dbc16..999f64c2f4 100644 --- a/keyboards/clawsome/roadster/info.json +++ b/keyboards/clawsome/roadster/info.json @@ -1,7 +1,7 @@ { "keyboard_name": "Roadster", "url": "www.clawboards.xyz", - "maintainer": "AAClawson (AlisGraveNil)", + "maintainer": "AlisGraveNil", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/clawsome/sedan/info.json b/keyboards/clawsome/sedan/info.json index 153c1fdf91..568c1e010b 100644 --- a/keyboards/clawsome/sedan/info.json +++ b/keyboards/clawsome/sedan/info.json @@ -1,7 +1,7 @@ { "keyboard_name": "sedan", "url": "www.clawboards.xyz", - "maintainer": "AAClawson (AlisGraveNil)", + "maintainer": "AlisGraveNil", "layouts": { "LAYOUT_65_ansi": { "layout": [ diff --git a/keyboards/clawsome/sidekick/info.json b/keyboards/clawsome/sidekick/info.json index d20edf87fb..0dd1ed5e80 100644 --- a/keyboards/clawsome/sidekick/info.json +++ b/keyboards/clawsome/sidekick/info.json @@ -1,7 +1,7 @@ { "keyboard_name": "Sidekick", "url": "", - "maintainer": "qmk", + "maintainer": "AlisGraveNil", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/clawsome/suv/info.json b/keyboards/clawsome/suv/info.json index 21a21556b5..70cfd37908 100644 --- a/keyboards/clawsome/suv/info.json +++ b/keyboards/clawsome/suv/info.json @@ -1,7 +1,7 @@ { "keyboard_name": "suv1.1", "url": "www.clawboards.xyz", - "maintainer": "AAClawson (AlisGraveNil)", + "maintainer": "AlisGraveNil", "layouts": { "LAYOUT": { "layout": [ From 3be47b3eaa7e18c49872d778d966a27de73004a5 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Fri, 24 Sep 2021 16:29:47 -0700 Subject: [PATCH 118/595] [Keyboard] Fix default keymap for Potato65s (#14587) --- .../potato65s/keymaps/default/keymap.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/keyboards/buildakb/potato65s/keymaps/default/keymap.c b/keyboards/buildakb/potato65s/keymaps/default/keymap.c index 1382100ce1..9f6eb0890b 100644 --- a/keyboards/buildakb/potato65s/keymaps/default/keymap.c +++ b/keyboards/buildakb/potato65s/keymaps/default/keymap.c @@ -23,17 +23,17 @@ enum layer_names { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_BASE] = LAYOUT_all( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_HOME, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, - MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + MO(_FN), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ), - [_FN1] = LAYOUT_all( + [_FN] = LAYOUT_all( KC_TILD, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, RESET, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, KC_MUTE, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, RESET, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT ) -}; \ No newline at end of file +}; From 68c327f6724347c06e0d62d6190945e09a42e240 Mon Sep 17 00:00:00 2001 From: Ryan Date: Sat, 25 Sep 2021 18:31:24 +1000 Subject: [PATCH 119/595] Remove keyboard-level `COMBO_ENABLE` rules (#14550) --- keyboards/handwired/aek64/config.h | 2 -- keyboards/handwired/aek64/keymaps/4sstylz/config.h | 3 +++ keyboards/handwired/aek64/keymaps/4sstylz/rules.mk | 1 + keyboards/handwired/aek64/rules.mk | 1 - keyboards/maxr1998/phoebe/rules.mk | 1 - keyboards/uranuma/rules.mk | 1 - 6 files changed, 4 insertions(+), 5 deletions(-) create mode 100644 keyboards/handwired/aek64/keymaps/4sstylz/config.h create mode 100644 keyboards/handwired/aek64/keymaps/4sstylz/rules.mk diff --git a/keyboards/handwired/aek64/config.h b/keyboards/handwired/aek64/config.h index 76281561e7..cc90dba00f 100644 --- a/keyboards/handwired/aek64/config.h +++ b/keyboards/handwired/aek64/config.h @@ -49,8 +49,6 @@ along with this program. If not, see . /* Enable double tab */ #define TAPPING_TERM 175 -#define COMBO_COUNT 1 - #define BACKLIGHT_PIN B7 #define BACKLIGHT_BREATHING #define BACKLIGHT_LEVELS 5 diff --git a/keyboards/handwired/aek64/keymaps/4sstylz/config.h b/keyboards/handwired/aek64/keymaps/4sstylz/config.h new file mode 100644 index 0000000000..914861332f --- /dev/null +++ b/keyboards/handwired/aek64/keymaps/4sstylz/config.h @@ -0,0 +1,3 @@ +#pragma once + +#define COMBO_COUNT 1 diff --git a/keyboards/handwired/aek64/keymaps/4sstylz/rules.mk b/keyboards/handwired/aek64/keymaps/4sstylz/rules.mk new file mode 100644 index 0000000000..ab1e438182 --- /dev/null +++ b/keyboards/handwired/aek64/keymaps/4sstylz/rules.mk @@ -0,0 +1 @@ +COMBO_ENABLE = yes diff --git a/keyboards/handwired/aek64/rules.mk b/keyboards/handwired/aek64/rules.mk index e4d6bd0d8b..6aaa28686f 100644 --- a/keyboards/handwired/aek64/rules.mk +++ b/keyboards/handwired/aek64/rules.mk @@ -15,6 +15,5 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover - not yet supported in LUFA UNICODE_ENABLE = yes # Enable support for arrow keys icon on the second layer. -COMBO_ENABLE = yes # Enable combo for special function when using multiple keys at once. NKRO_ENABLE = yes BACKLIGHT_ENABLE = yes diff --git a/keyboards/maxr1998/phoebe/rules.mk b/keyboards/maxr1998/phoebe/rules.mk index 1a39a4aea4..f7ef7ab728 100644 --- a/keyboards/maxr1998/phoebe/rules.mk +++ b/keyboards/maxr1998/phoebe/rules.mk @@ -13,7 +13,6 @@ MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = no # Audio control and System control CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration -COMBO_ENABLE = no # Key combo feature NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output diff --git a/keyboards/uranuma/rules.mk b/keyboards/uranuma/rules.mk index 5c865ddd1b..28aa4c81de 100644 --- a/keyboards/uranuma/rules.mk +++ b/keyboards/uranuma/rules.mk @@ -21,5 +21,4 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output -#COMBO_ENABLE = yes #SRC += .nicola.c \ From c74bd72d4fde99a611e54bba18bdab4d2f24e038 Mon Sep 17 00:00:00 2001 From: Albert Y <76888457+filterpaper@users.noreply.github.com> Date: Sun, 26 Sep 2021 00:47:56 +0800 Subject: [PATCH 120/595] [Keyboard] Fix pin spacing alignmnent (#14592) Co-authored-by: filterpaper --- keyboards/ferris/sweep/config.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/keyboards/ferris/sweep/config.h b/keyboards/ferris/sweep/config.h index ad960610d1..34d5030b64 100644 --- a/keyboards/ferris/sweep/config.h +++ b/keyboards/ferris/sweep/config.h @@ -49,8 +49,8 @@ along with this program. If not, see . #define DIRECT_PINS_RIGHT { \ { F4, F5, F6, F7, E6 }, \ - { D3,B6,B2,B3,B1 }, \ - { D7,C6,D4,D0,D1}, \ + { D3, B6, B2, B3, B1 }, \ + { D7, C6, D4, D0, D1 }, \ { B5, B4, NO_PIN, NO_PIN, NO_PIN } \ } From 8b0b858db957da74c77f737580f32009747ac8f1 Mon Sep 17 00:00:00 2001 From: Bahrul Hidayat Date: Sun, 26 Sep 2021 00:48:47 +0800 Subject: [PATCH 121/595] [Keyboard] add keyboard selka40 (#14560) Co-authored-by: Drashna Jaelre --- keyboards/dyz/selka40/config.h | 56 +++++++++++++++++++ keyboards/dyz/selka40/info.json | 30 ++++++++++ .../dyz/selka40/keymaps/default/keymap.c | 43 ++++++++++++++ keyboards/dyz/selka40/keymaps/via/keymap.c | 44 +++++++++++++++ keyboards/dyz/selka40/keymaps/via/rules.mk | 1 + keyboards/dyz/selka40/readme.md | 26 +++++++++ keyboards/dyz/selka40/rules.mk | 22 ++++++++ keyboards/dyz/selka40/selka40.c | 16 ++++++ keyboards/dyz/selka40/selka40.h | 31 ++++++++++ 9 files changed, 269 insertions(+) create mode 100644 keyboards/dyz/selka40/config.h create mode 100644 keyboards/dyz/selka40/info.json create mode 100644 keyboards/dyz/selka40/keymaps/default/keymap.c create mode 100644 keyboards/dyz/selka40/keymaps/via/keymap.c create mode 100644 keyboards/dyz/selka40/keymaps/via/rules.mk create mode 100644 keyboards/dyz/selka40/readme.md create mode 100644 keyboards/dyz/selka40/rules.mk create mode 100644 keyboards/dyz/selka40/selka40.c create mode 100644 keyboards/dyz/selka40/selka40.h diff --git a/keyboards/dyz/selka40/config.h b/keyboards/dyz/selka40/config.h new file mode 100644 index 0000000000..6f79036296 --- /dev/null +++ b/keyboards/dyz/selka40/config.h @@ -0,0 +1,56 @@ +/* +Copyright 2021 dayatz + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define MANUFACTURER dyz +#define PRODUCT selka40 + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 13 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Bootmagic Lite key configuration */ +#define BOOTMAGIC_LITE_ROW 0 +#define BOOTMAGIC_LITE_COLUMN 0 + +#define LED_CAPS_LOCK_PIN B1 +#define LED_NUM_LOCK_PIN B3 +#define LED_SCROLL_LOCK_PIN B2 + +#define TAP_CODE_DELAY 10 // Need this delay for some keys like VOLD/VOLU to work +#define ENCODERS_PAD_A { D6 } +#define ENCODERS_PAD_B { D7 } + +#define DYNAMIC_KEYMAP_LAYER_COUNT 3 diff --git a/keyboards/dyz/selka40/info.json b/keyboards/dyz/selka40/info.json new file mode 100644 index 0000000000..5643cf7392 --- /dev/null +++ b/keyboards/dyz/selka40/info.json @@ -0,0 +1,30 @@ +{ + "keyboard_name": "selka40", + "url": "https://github.com/dayatz/mechanical-keyboards/tree/master/selka40", + "maintainer": "dayatz", + "diode_direction": "COL2ROW", + "matrix_pins": { + "cols": ["F0", "F1", "F4", "F5", "F6", "F7", "E6", "B7", "D5", "D3", "D2", "D1", "D0"], + "rows": ["C7", "C6", "B6", "B5"] + }, + "rgblight": { + "led_count": 14, + "pin": "B4", + "hue_steps": 10, + "saturation_steps": 10, + "brightness_steps": 10, + "animations": { + "all": true + } + }, + "usb": { + "vid": "0xD772", + "pid": "0x000C", + "device_ver": "0x0001" + }, + "layouts": { + "LAYOUT": { + "layout": [{"label":"Esc", "x":1.03, "y":2.45}, {"label":"Q", "x":2.03, "y":2.45}, {"label":"P", "x":11.969999999999999, "y":2.45}, {"label":"{", "x":12.969999999999999, "y":2.45}, {"label":"}", "x":13.969999999999999, "y":2.45}, {"label":"Tab", "x":0.9, "y":3.45, "w":1.25}, {"label":"A", "x":2.15, "y":3.45}, {"label":"\"", "x":12.34, "y":3.45}, {"label":"Enter", "x":13.34, "y":3.45, "w":1.75}, {"label":"Shift", "x":0.75, "y":4.45, "w":1.75}, {"label":"Z", "x":2.5, "y":4.45}, {"label":">", "x":11.97, "y":4.45}, {"label":"?", "x":12.97, "y":4.45}, {"label":"Shift", "x":13.97, "y":4.45, "w":1.25}, {"label":"Ctrl", "x":1, "y":5.45, "w":1.25}, {"label":"Win", "x":2.25, "y":5.45}, {"label":"Fn2", "x":12.72, "y":5.45}, {"label":"Ctrl", "x":13.72, "y":5.45, "w":1.25}, {"label":"W", "x":3.47, "y":1.9300000000000006}, {"label":"E", "x":4.47, "y":1.9300000000000006}, {"label":"R", "x":5.47, "y":1.9300000000000006}, {"label":"T", "x":6.47, "y":1.9300000000000006}, {"label":"S", "x":3.72, "y":2.9300000000000006}, {"label":"D", "x":4.72, "y":2.9300000000000006}, {"label":"F", "x":5.72, "y":2.9300000000000006}, {"label":"G", "x":6.72, "y":2.9300000000000006}, {"label":"X", "x":4.22, "y":3.9300000000000006}, {"label":"C", "x":5.22, "y":3.9300000000000006}, {"label":"V", "x":6.22, "y":3.9300000000000006}, {"label":"B", "x":7.22, "y":3.9300000000000006}, {"label":"Alt", "x":5.22, "y":4.930000000000001}, {"label":"Space", "x":6.22, "y":4.930000000000001, "w":2}, {"label":"Y", "x":7.37, "y":4.1000000000000005}, {"label":"U", "x":8.37, "y":4.1000000000000005}, {"label":"I", "x":9.37, "y":4.1000000000000005}, {"label":"O", "x":10.37, "y":4.1000000000000005}, {"label":"H", "x":7.62, "y":5.1000000000000005}, {"label":"J", "x":8.62, "y":5.1000000000000005}, {"label":"K", "x":9.62, "y":5.1000000000000005}, {"label":"L", "x":10.62, "y":5.1000000000000005}, {"label":"B", "x":7.12, "y":6.1000000000000005}, {"label":"N", "x":8.12, "y":6.1000000000000005}, {"label":"M", "x":9.12, "y":6.1000000000000005}, {"label":"<", "x":10.12, "y":6.1000000000000005}, {"label":"Space", "x":7.12, "y":7.1000000000000005, "w":2.25}, {"label":"Fn", "x":9.37, "y":7.1000000000000005}] + } + } +} diff --git a/keyboards/dyz/selka40/keymaps/default/keymap.c b/keyboards/dyz/selka40/keymaps/default/keymap.c new file mode 100644 index 0000000000..9a386de962 --- /dev/null +++ b/keyboards/dyz/selka40/keymaps/default/keymap.c @@ -0,0 +1,43 @@ +/* Copyright 2021 dayatz + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +enum layer_names { + _BASE, + _FN, + _FN2 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_all( /* Base */ + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LWIN, KC_LALT, KC_SPC, KC_SPC, MO(_FN), MO(_FN2), KC_RCTL + ), + [_FN] = LAYOUT_all( + KC_CAPS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______ + ), + [_FN2] = LAYOUT_all( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/dyz/selka40/keymaps/via/keymap.c b/keyboards/dyz/selka40/keymaps/via/keymap.c new file mode 100644 index 0000000000..e142587994 --- /dev/null +++ b/keyboards/dyz/selka40/keymaps/via/keymap.c @@ -0,0 +1,44 @@ +/* Copyright 2021 dayatz + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +enum layer_names { + _BASE, + _FN, + _FN2 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_all( /* Base */ + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LWIN, KC_LALT, KC_SPC, KC_SPC, MO(_FN), MO(_FN2), KC_RCTL + ), + [_FN] = LAYOUT_all( + KC_CAPS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______ + ), + [_FN2] = LAYOUT_all( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; + diff --git a/keyboards/dyz/selka40/keymaps/via/rules.mk b/keyboards/dyz/selka40/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/dyz/selka40/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/dyz/selka40/readme.md b/keyboards/dyz/selka40/readme.md new file mode 100644 index 0000000000..6232d18a10 --- /dev/null +++ b/keyboards/dyz/selka40/readme.md @@ -0,0 +1,26 @@ +# selka40 + +![pcb](https://i.imgur.com/pqnEVngh.jpg) + +40% (13u) ergo hotswap with multiple layouts for bottom row + +- Keyboard Maintainer: [dayatz](https://github.com/dayatz) +- Hardware Supported: ATMega32u4 + +Make example for this keyboard (after setting up your build environment): + + make dyz/selka40:default + +Flashing example for this keyboard: + + make dyz/selka40:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +- **Bootmagic reset**: Hold the `Esc` key while plugging in the USB cable +- **Physical reset button**: Briefly press the button on the back of the PCB +- **Keycode in layout**: Press the key mapped to `RESET` if it is available diff --git a/keyboards/dyz/selka40/rules.mk b/keyboards/dyz/selka40/rules.mk new file mode 100644 index 0000000000..209bdae2ee --- /dev/null +++ b/keyboards/dyz/selka40/rules.mk @@ -0,0 +1,22 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +ENCODER_ENABLE = yes diff --git a/keyboards/dyz/selka40/selka40.c b/keyboards/dyz/selka40/selka40.c new file mode 100644 index 0000000000..f46aac4b2b --- /dev/null +++ b/keyboards/dyz/selka40/selka40.c @@ -0,0 +1,16 @@ +/* Copyright 2021 dayatz + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "selka40.h" diff --git a/keyboards/dyz/selka40/selka40.h b/keyboards/dyz/selka40/selka40.h new file mode 100644 index 0000000000..c241bd44f7 --- /dev/null +++ b/keyboards/dyz/selka40/selka40.h @@ -0,0 +1,31 @@ +/* Copyright 2021 dayatz + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" +#define _X_ KC_NO + +#define LAYOUT_all( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ + K30, K31, K34, K35, K36, K37, K3B, K3C \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, _X_ }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C }, \ + { K30, K31, _X_, _X_, K34, K35, K36, K37, _X_, _X_, _X_, K3B, K3C } \ +} From 29079e54f140c5e1e9ef215cb16881e378bae2be Mon Sep 17 00:00:00 2001 From: Bahrul Hidayat Date: Sun, 26 Sep 2021 00:49:26 +0800 Subject: [PATCH 122/595] [Keyboard] add keyboard dyz40 (#14533) Co-authored-by: Drashna Jaelre --- keyboards/dyz/dyz40/config.h | 42 +++++++++++++++++++ keyboards/dyz/dyz40/dyz40.c | 16 ++++++++ keyboards/dyz/dyz40/dyz40.h | 31 ++++++++++++++ keyboards/dyz/dyz40/info.json | 30 ++++++++++++++ keyboards/dyz/dyz40/keymaps/default/keymap.c | 43 ++++++++++++++++++++ keyboards/dyz/dyz40/keymaps/via/keymap.c | 43 ++++++++++++++++++++ keyboards/dyz/dyz40/keymaps/via/rules.mk | 1 + keyboards/dyz/dyz40/readme.md | 27 ++++++++++++ keyboards/dyz/dyz40/rules.mk | 22 ++++++++++ 9 files changed, 255 insertions(+) create mode 100644 keyboards/dyz/dyz40/config.h create mode 100644 keyboards/dyz/dyz40/dyz40.c create mode 100644 keyboards/dyz/dyz40/dyz40.h create mode 100644 keyboards/dyz/dyz40/info.json create mode 100644 keyboards/dyz/dyz40/keymaps/default/keymap.c create mode 100644 keyboards/dyz/dyz40/keymaps/via/keymap.c create mode 100644 keyboards/dyz/dyz40/keymaps/via/rules.mk create mode 100644 keyboards/dyz/dyz40/readme.md create mode 100644 keyboards/dyz/dyz40/rules.mk diff --git a/keyboards/dyz/dyz40/config.h b/keyboards/dyz/dyz40/config.h new file mode 100644 index 0000000000..581f925165 --- /dev/null +++ b/keyboards/dyz/dyz40/config.h @@ -0,0 +1,42 @@ +/* +Copyright 2021 dayatz + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define MANUFACTURER dyz +#define PRODUCT dyz40 + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 13 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Bootmagic Lite key configuration */ +#define BOOTMAGIC_LITE_ROW 0 +#define BOOTMAGIC_LITE_COLUMN 0 + +#define TAP_CODE_DELAY 10 // Need this delay for some keys like VOLD/VOLU to work +#define ENCODERS_PAD_A { D1 } +#define ENCODERS_PAD_B { D0 } + +#define DYNAMIC_KEYMAP_LAYER_COUNT 3 diff --git a/keyboards/dyz/dyz40/dyz40.c b/keyboards/dyz/dyz40/dyz40.c new file mode 100644 index 0000000000..1ca2cf1082 --- /dev/null +++ b/keyboards/dyz/dyz40/dyz40.c @@ -0,0 +1,16 @@ +/* Copyright 2021 dayatz + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "dyz40.h" diff --git a/keyboards/dyz/dyz40/dyz40.h b/keyboards/dyz/dyz40/dyz40.h new file mode 100644 index 0000000000..8fc7c7d6b6 --- /dev/null +++ b/keyboards/dyz/dyz40/dyz40.h @@ -0,0 +1,31 @@ +/* Copyright 2021 dayatz + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" +#define _X_ KC_NO + +#define LAYOUT_all( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \ + K30, K31, K32, K33, K36, K37, K3A, K3B, K3C \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, _X_ }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, _X_ }, \ + { K30, K31, K32, K33, _X_, _X_, K36, K37, _X_, _X_, K3A, K3B, K3C } \ +} diff --git a/keyboards/dyz/dyz40/info.json b/keyboards/dyz/dyz40/info.json new file mode 100644 index 0000000000..4d17bbeb26 --- /dev/null +++ b/keyboards/dyz/dyz40/info.json @@ -0,0 +1,30 @@ +{ + "keyboard_name": "dyz40", + "url": "https://github.com/dayatz/mechanical-keyboards/tree/master/dyz40", + "maintainer": "dayatz", + "diode_direction": "COL2ROW", + "matrix_pins": { + "cols": ["E6", "F0", "F1", "F4", "F5", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7"], + "rows": ["B0", "B1", "B3", "B2"] + }, + "rgblight": { + "led_count": 13, + "pin": "B7", + "hue_steps": 10, + "saturation_steps": 10, + "brightness_steps": 10, + "animations": { + "all": true + } + }, + "usb": { + "vid": "0xD772", + "pid": "0x000B", + "device_ver": "0x0001" + }, + "layouts": { + "LAYOUT": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"label":"{", "x":11, "y":0}, {"label":"}", "x":12, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.25}, {"label":"A", "x":1.25, "y":1}, {"label":"S", "x":2.25, "y":1}, {"label":"D", "x":3.25, "y":1}, {"label":"F", "x":4.25, "y":1}, {"label":"G", "x":5.25, "y":1}, {"label":"H", "x":6.25, "y":1}, {"label":"J", "x":7.25, "y":1}, {"label":"K", "x":8.25, "y":1}, {"label":"L", "x":9.25, "y":1}, {"label":"", "x":10.25, "y":1}, {"label":"Enter", "x":11.25, "y":1, "w":1.75}, {"label":"Shift", "x":0, "y":2, "w":1.75}, {"label":"Z", "x":1.75, "y":2}, {"label":"X", "x":2.75, "y":2}, {"label":"C", "x":3.75, "y":2}, {"label":"V", "x":4.75, "y":2}, {"label":"B", "x":5.75, "y":2}, {"label":"N", "x":6.75, "y":2}, {"label":"M", "x":7.75, "y":2}, {"label":"", "x":8.75, "y":2}, {"label":"", "x":9.75, "y":2}, {"label":"", "x":10.75, "y":2}, {"label":"Shift", "x":11.75, "y":2, "w":1.25}, {"label":"Ctrl", "x":0, "y":3, "w":1.5}, {"label":"Win", "x":1.5, "y":3}, {"label":"Alt", "x":2.5, "y":3, "w":1.5}, {"label":"Space", "x":4, "y":3, "w":2.75}, {"label":"Fn", "x":6.75, "y":3, "w":2.25}, {"label":"Alt", "x":9, "y":3, "w":1.5}, {"label":"Win", "x":10.5, "y":3}, {"label":"Ctrl", "x":11.5, "y":3, "w":1.5}] + } + } +} diff --git a/keyboards/dyz/dyz40/keymaps/default/keymap.c b/keyboards/dyz/dyz40/keymaps/default/keymap.c new file mode 100644 index 0000000000..0c0c984702 --- /dev/null +++ b/keyboards/dyz/dyz40/keymaps/default/keymap.c @@ -0,0 +1,43 @@ +/* Copyright 2021 dayatz + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +enum layer_names { + _BASE, + _FN, + _FN2 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_all( /* Base */ + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LWIN, KC_LALT, KC_SPC, MO(_FN), MO(_FN2), KC_RALT, KC_RWIN, KC_SCLN + ), + [_FN] = LAYOUT_all( + KC_CAPS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [_FN2] = LAYOUT_all( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/dyz/dyz40/keymaps/via/keymap.c b/keyboards/dyz/dyz40/keymaps/via/keymap.c new file mode 100644 index 0000000000..0c0c984702 --- /dev/null +++ b/keyboards/dyz/dyz40/keymaps/via/keymap.c @@ -0,0 +1,43 @@ +/* Copyright 2021 dayatz + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +enum layer_names { + _BASE, + _FN, + _FN2 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_all( /* Base */ + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LWIN, KC_LALT, KC_SPC, MO(_FN), MO(_FN2), KC_RALT, KC_RWIN, KC_SCLN + ), + [_FN] = LAYOUT_all( + KC_CAPS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [_FN2] = LAYOUT_all( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/dyz/dyz40/keymaps/via/rules.mk b/keyboards/dyz/dyz40/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/dyz/dyz40/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/dyz/dyz40/readme.md b/keyboards/dyz/dyz40/readme.md new file mode 100644 index 0000000000..f73c4ef46c --- /dev/null +++ b/keyboards/dyz/dyz40/readme.md @@ -0,0 +1,27 @@ +# dyz40 + +![pcb](https://i.imgur.com/XFYzF94h.jpg) + +40% 13u hotswap with multiple layouts for bottom row + +- Keyboard Maintainer: [dayatz](https://github.com/dayatz) +- Hardware Supported: ATMega32u4 +- Hardware Availability: Local Indonesia GB. + +Make example for this keyboard (after setting up your build environment): + + make dyz/dyz40:default + +Flashing example for this keyboard: + + make dyz/dyz40:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +- **Bootmagic reset**: Hold the `Esc` key while plugging in the USB cable +- **Physical reset button**: Briefly short the pins under the Enter key +- **Keycode in layout**: Press the key mapped to `RESET` if it is available diff --git a/keyboards/dyz/dyz40/rules.mk b/keyboards/dyz/dyz40/rules.mk new file mode 100644 index 0000000000..209bdae2ee --- /dev/null +++ b/keyboards/dyz/dyz40/rules.mk @@ -0,0 +1,22 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +ENCODER_ENABLE = yes From aee0b0097b1a868fe63fe3be66c6c2947fcb3067 Mon Sep 17 00:00:00 2001 From: Bahrul Hidayat Date: Sun, 26 Sep 2021 00:49:58 +0800 Subject: [PATCH 123/595] [Keyboard] add keyboard dyz_TKL (#14535) Co-authored-by: Drashna Jaelre --- keyboards/dyz/dyz_tkl/config.h | 42 ++++++++++++++++ keyboards/dyz/dyz_tkl/dyz_tkl.c | 16 ++++++ keyboards/dyz/dyz_tkl/dyz_tkl.h | 41 ++++++++++++++++ keyboards/dyz/dyz_tkl/info.json | 27 ++++++++++ .../dyz/dyz_tkl/keymaps/default/keymap.c | 49 +++++++++++++++++++ keyboards/dyz/dyz_tkl/keymaps/via/keymap.c | 49 +++++++++++++++++++ keyboards/dyz/dyz_tkl/keymaps/via/rules.mk | 1 + keyboards/dyz/dyz_tkl/readme.md | 27 ++++++++++ keyboards/dyz/dyz_tkl/rules.mk | 22 +++++++++ 9 files changed, 274 insertions(+) create mode 100644 keyboards/dyz/dyz_tkl/config.h create mode 100644 keyboards/dyz/dyz_tkl/dyz_tkl.c create mode 100644 keyboards/dyz/dyz_tkl/dyz_tkl.h create mode 100644 keyboards/dyz/dyz_tkl/info.json create mode 100644 keyboards/dyz/dyz_tkl/keymaps/default/keymap.c create mode 100644 keyboards/dyz/dyz_tkl/keymaps/via/keymap.c create mode 100644 keyboards/dyz/dyz_tkl/keymaps/via/rules.mk create mode 100644 keyboards/dyz/dyz_tkl/readme.md create mode 100644 keyboards/dyz/dyz_tkl/rules.mk diff --git a/keyboards/dyz/dyz_tkl/config.h b/keyboards/dyz/dyz_tkl/config.h new file mode 100644 index 0000000000..22f17d403f --- /dev/null +++ b/keyboards/dyz/dyz_tkl/config.h @@ -0,0 +1,42 @@ +/* +Copyright 2021 dayatz + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define MANUFACTURER dyz +#define PRODUCT dyz_TKL + +/* key matrix size */ +#define MATRIX_ROWS 12 +#define MATRIX_COLS 9 + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Bootmagic Lite key configuration */ +#define BOOTMAGIC_LITE_ROW 0 +#define BOOTMAGIC_LITE_COLUMN 0 + +#define LED_CAPS_LOCK_PIN D2 + +#define TAP_CODE_DELAY 10 // Need this delay for some keys like VOLD/VOLU to work + +#define DYNAMIC_KEYMAP_LAYER_COUNT 3 diff --git a/keyboards/dyz/dyz_tkl/dyz_tkl.c b/keyboards/dyz/dyz_tkl/dyz_tkl.c new file mode 100644 index 0000000000..cdc23b8664 --- /dev/null +++ b/keyboards/dyz/dyz_tkl/dyz_tkl.c @@ -0,0 +1,16 @@ +/* Copyright 2021 dayatz + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "dyz_tkl.h" diff --git a/keyboards/dyz/dyz_tkl/dyz_tkl.h b/keyboards/dyz/dyz_tkl/dyz_tkl.h new file mode 100644 index 0000000000..b891b74813 --- /dev/null +++ b/keyboards/dyz/dyz_tkl/dyz_tkl.h @@ -0,0 +1,41 @@ +/* Copyright 2021 dayatz + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" +#define _X_ KC_NO + +#define LAYOUT_all( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K06, K16, K07, K17, K08, K18, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K26, K36, K27, K37, K28, K38, \ + K40, K50, K41, K51, K42, K52, K53, K44, K54, K45, K55, K46, K56, K47, K57, K48, K58, \ + K60, K70, K61, K71, K62, K72, K73, K64, K74, K65, K75, K66, K76, K67, \ + K80, K90, K81, K91, K82, K92, K93, K84, K94, K85, K95, K86, K96, K87, K88, \ + KA0, KB0, KA1, KB3, KB5, KA6, KB6, KA7, KB7, KA8, KB8 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08 }, \ + { K10, K11, K12, K13, K14, _X_, K16, K17, K18 }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28 }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38 }, \ + { K40, K41, K42, _X_, K44, K45, K46, K47, K48 }, \ + { K50, K51, K52, K53, K54, K55, K56, K57, K58 }, \ + { K60, K61, K62, _X_, K64, K65, K66, K67, _X_ }, \ + { K70, K71, K72, K73, K74, K75, K76, _X_, _X_ }, \ + { K80, K81, K82, _X_, K84, K85, K86, K87, K88 }, \ + { K90, K91, K92, K93, K94, K95, K96, _X_, _X_ }, \ + { KA0, KA1, _X_, _X_, _X_, _X_, KA6, KA7, KA8 }, \ + { KB0, _X_, _X_, KB3, _X_, KB5, KB6, KB7, KB8 } \ +} diff --git a/keyboards/dyz/dyz_tkl/info.json b/keyboards/dyz/dyz_tkl/info.json new file mode 100644 index 0000000000..98e7fb94ef --- /dev/null +++ b/keyboards/dyz/dyz_tkl/info.json @@ -0,0 +1,27 @@ +{ + "keyboard_name": "dyz_TKL", + "url": "https://github.com/dayatz/mechanical-keyboards/tree/master/dyz_tkl", + "maintainer": "dayatz", + "diode_direction": "COL2ROW", + "matrix_pins": { + "rows": ["E6", "B0", "B3", "B1", "B7", "B2", "F1", "F0", "F5", "F4", "F7", "F6"], + "cols": ["C7", "C6", "B6", "B5", "B4", "D7", "D6", "D4", "D0"] + }, + "rgblight": { + "led_count": 25, + "pin": "D1", + "animations": { + "all": true + } + }, + "usb": { + "vid": "0xD772", + "pid": "0x000C", + "device_ver": "0x0001" + }, + "layouts": { + "LAYOUT": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"label":"Backspace", "x":13, "y":1.25, "w":2}, {"label":"Insert", "x":15.25, "y":1.25}, {"label":"Home", "x":16.25, "y":1.25}, {"label":"PgUp", "x":17.25, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"{", "x":11.5, "y":2.25}, {"label":"}", "x":12.5, "y":2.25}, {"label":"|", "x":13.5, "y":2.25, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.25}, {"label":"End", "x":16.25, "y":2.25}, {"label":"PgDn", "x":17.25, "y":2.25}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":":", "x":10.75, "y":3.25}, {"label":"\"", "x":11.75, "y":3.25}, {"label":"Enter", "x":12.75, "y":3.25, "w":2.25}, {"label":"Shift", "x":0, "y":4.25, "w":2.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.25}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.25}, {"label":"Win", "x":1.25, "y":5.25, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.25}, {"x":3.75, "y":5.25, "w":6.25}, {"label":"Alt", "x":10, "y":5.25, "w":1.25}, {"label":"Win", "x":11.25, "y":5.25, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.25, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.25, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.25}, {"label":"\u2193", "x":16.25, "y":5.25}, {"label":"\u2192", "x":17.25, "y":5.25}] + } + } +} diff --git a/keyboards/dyz/dyz_tkl/keymaps/default/keymap.c b/keyboards/dyz/dyz_tkl/keymaps/default/keymap.c new file mode 100644 index 0000000000..56aae4be16 --- /dev/null +++ b/keyboards/dyz/dyz_tkl/keymaps/default/keymap.c @@ -0,0 +1,49 @@ +/* Copyright 2021 dayatz + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +enum layer_names { + _BASE, + _FN, + _FN2 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSLS, KC_INSERT, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT + ), + [_FN] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [_FN2] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/dyz/dyz_tkl/keymaps/via/keymap.c b/keyboards/dyz/dyz_tkl/keymaps/via/keymap.c new file mode 100644 index 0000000000..56aae4be16 --- /dev/null +++ b/keyboards/dyz/dyz_tkl/keymaps/via/keymap.c @@ -0,0 +1,49 @@ +/* Copyright 2021 dayatz + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +enum layer_names { + _BASE, + _FN, + _FN2 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSLS, KC_INSERT, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT + ), + [_FN] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [_FN2] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/dyz/dyz_tkl/keymaps/via/rules.mk b/keyboards/dyz/dyz_tkl/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/dyz/dyz_tkl/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/dyz/dyz_tkl/readme.md b/keyboards/dyz/dyz_tkl/readme.md new file mode 100644 index 0000000000..2de8105d24 --- /dev/null +++ b/keyboards/dyz/dyz_tkl/readme.md @@ -0,0 +1,27 @@ +# dyz_tkl + +![pcb](https://i.imgur.com/5OYWF0Mh.jpg) + +TKL pcb that fits most of the boards, support 2 sides of USB and multiple layouts for F row. + +- Keyboard Maintainer: [dayatz](https://github.com/dayatz) +- Hardware Supported: ATMega32u4 +- Hardware Availability: Local Indonesia GB and will available publicly in the future. + +Make example for this keyboard (after setting up your build environment): + + make dyz/dyz_tkl:default + +Flashing example for this keyboard: + + make dyz/dyz_tkl:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +- **Bootmagic reset**: Hold the `Esc` key while plugging in the USB cable +- **Physical reset button**: Briefly short the pins under the spacebar key +- **Keycode in layout**: Press the key mapped to `RESET` if it is available diff --git a/keyboards/dyz/dyz_tkl/rules.mk b/keyboards/dyz/dyz_tkl/rules.mk new file mode 100644 index 0000000000..b1a2bc4551 --- /dev/null +++ b/keyboards/dyz/dyz_tkl/rules.mk @@ -0,0 +1,22 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +ENCODER_ENABLE = no From e1bf49fc97a3b97a260566fda7ed457eab10bf8f Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Sat, 25 Sep 2021 10:35:27 -0700 Subject: [PATCH 124/595] Remove GCC version check from song list inclusion (#14600) --- quantum/audio/song_list.h | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/quantum/audio/song_list.h b/quantum/audio/song_list.h index b54b397e1c..8e80a016aa 100644 --- a/quantum/audio/song_list.h +++ b/quantum/audio/song_list.h @@ -20,11 +20,9 @@ #include "musical_notes.h" -#if __GNUC__ > 5 // don't use for older gcc compilers since check isn't supported. -# if __has_include("user_song_list.h") -# include "user_song_list.h" -# endif // if file exists -#endif // __GNUC__ +#if __has_include("user_song_list.h") +# include "user_song_list.h" +#endif // if file exists #define NO_SOUND From 5c2d15573d32b839f0cf7915ef141812ab03bfdf Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Sat, 25 Sep 2021 18:03:00 +0000 Subject: [PATCH 125/595] Saka68 Hotswap Refactor (#14595) * rename LAYOUT to LAYOUT_68_ansi * tidy-up keymaps Adjusts indenting for readability/aesthetics. * remove default keymap readme * add LAYOUT_68_iso macro * enable Community Layout support * remove KBFirmware Parser references * correct keyboard metadata * specify keyboard variant in info.json and config.h * correct maintainer field in info.json --- keyboards/cmm_studio/saka68/hotswap/config.h | 6 +- keyboards/cmm_studio/saka68/hotswap/hotswap.h | 45 +++++---- keyboards/cmm_studio/saka68/hotswap/info.json | 91 ++++++++++++++++++- .../saka68/hotswap/keymaps/default/keymap.c | 34 +++---- .../saka68/hotswap/keymaps/default/readme.md | 1 - .../saka68/hotswap/keymaps/via/keymap.c | 61 +++++++------ keyboards/cmm_studio/saka68/hotswap/rules.mk | 3 +- 7 files changed, 165 insertions(+), 76 deletions(-) delete mode 100644 keyboards/cmm_studio/saka68/hotswap/keymaps/default/readme.md diff --git a/keyboards/cmm_studio/saka68/hotswap/config.h b/keyboards/cmm_studio/saka68/hotswap/config.h index 7f19723b70..9879dadd50 100644 --- a/keyboards/cmm_studio/saka68/hotswap/config.h +++ b/keyboards/cmm_studio/saka68/hotswap/config.h @@ -25,7 +25,7 @@ along with this program. If not, see . #define PRODUCT_ID 0x5348 #define DEVICE_VER 0x0001 #define MANUFACTURER CMM.Studio -#define PRODUCT Saka68 +#define PRODUCT Saka68 Hotswap /* key matrix size */ #define MATRIX_ROWS 5 @@ -45,7 +45,3 @@ along with this program. If not, see . #define MATRIX_COL_PINS { D4, D6, D7, B4, B5, B6, C6, F5, F4, F1, F0, B1, B2, B3, D3, D5 } #define DIODE_DIRECTION COL2ROW - - -// generated by KBFirmware JSON to QMK Parser -// https://noroadsleft.github.io/kbf_qmk_converter/ diff --git a/keyboards/cmm_studio/saka68/hotswap/hotswap.h b/keyboards/cmm_studio/saka68/hotswap/hotswap.h index 69f782ad78..f8b45f0980 100644 --- a/keyboards/cmm_studio/saka68/hotswap/hotswap.h +++ b/keyboards/cmm_studio/saka68/hotswap/hotswap.h @@ -14,23 +14,34 @@ * along with this program. If not, see . */ - #pragma once +#pragma once - #include "quantum.h" +#include "quantum.h" - #define LAYOUT( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ - K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3E, \ - K40, K41, K42, K46, K49, K4A, K4B, K4D, K4E, K4F \ - ) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, KC_NO, KC_NO }, \ - { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, KC_NO, K3E, KC_NO }, \ - { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, K49, K4A, K4B, KC_NO, K4D, K4E, K4F }, \ - } +#define LAYOUT_68_ansi( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3E, \ + K40, K41, K42, K46, K49, K4A, K4B, K4D, K4E, K4F \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, KC_NO, KC_NO }, \ + { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, KC_NO, K3E, KC_NO }, \ + { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, K49, K4A, K4B, KC_NO, K4D, K4E, K4F }, \ +} - // generated by KBFirmware JSON to QMK Parser - // https://noroadsleft.github.io/kbf_qmk_converter/ +#define LAYOUT_68_iso( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1E, K1F, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3E, \ + K40, K41, K42, K46, K49, K4A, K4B, K4D, K4E, K4F \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, KC_NO, K1E, K1F }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, KC_NO, KC_NO }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, KC_NO, K3E, KC_NO }, \ + { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, K49, K4A, K4B, KC_NO, K4D, K4E, K4F }, \ +} diff --git a/keyboards/cmm_studio/saka68/hotswap/info.json b/keyboards/cmm_studio/saka68/hotswap/info.json index 9157e09234..2e48427712 100644 --- a/keyboards/cmm_studio/saka68/hotswap/info.json +++ b/keyboards/cmm_studio/saka68/hotswap/info.json @@ -1,9 +1,12 @@ { - "keyboard_name": "CMM.Studio Saka68", + "keyboard_name": "CMM.Studio Saka68 Hotswap", "url": "", - "maintainer": "qmk", + "maintainer": "CMMS-Freather", + "layout_aliases": { + "LAYOUT": "LAYOUT_68_ansi" + }, "layouts": { - "LAYOUT": { + "LAYOUT_68_ansi": { "layout": [ {"label":"K00 (D2,D4)", "x":0, "y":0}, {"label":"K01 (D2,D6)", "x":1, "y":0}, @@ -21,6 +24,7 @@ {"label":"K0D (D2,B3)", "x":13, "y":0, "w":2}, {"label":"K0E (D2,D3)", "x":15.25, "y":0}, {"label":"K0F (D2,D5)", "x":16.25, "y":0}, + {"label":"K10 (D1,D4)", "x":0, "y":1, "w":1.5}, {"label":"K11 (D1,D6)", "x":1.5, "y":1}, {"label":"K12 (D1,D7)", "x":2.5, "y":1}, @@ -37,6 +41,7 @@ {"label":"K1D (D1,B3)", "x":13.5, "y":1, "w":1.5}, {"label":"K1E (D1,D3)", "x":15.25, "y":1}, {"label":"K1F (D1,D5)", "x":16.25, "y":1}, + {"label":"K20 (B0,D4)", "x":0, "y":2, "w":1.75}, {"label":"K21 (B0,D6)", "x":1.75, "y":2}, {"label":"K22 (B0,D7)", "x":2.75, "y":2}, @@ -50,6 +55,7 @@ {"label":"K2A (B0,F0)", "x":10.75, "y":2}, {"label":"K2B (B0,B1)", "x":11.75, "y":2}, {"label":"K2D (B0,B3)", "x":12.75, "y":2, "w":2.25}, + {"label":"K30 (F6,D4)", "x":0, "y":3, "w":2.25}, {"label":"K32 (F6,D7)", "x":2.25, "y":3}, {"label":"K33 (F6,B4)", "x":3.25, "y":3}, @@ -63,6 +69,84 @@ {"label":"K3B (F6,B1)", "x":11.25, "y":3}, {"label":"K3C (F6,B2)", "x":12.25, "y":3, "w":2.75}, {"label":"K3E (F6,D3)", "x":15.25, "y":3}, + + {"label":"K40 (F7,D4)", "x":0, "y":4, "w":1.25}, + {"label":"K41 (F7,D6)", "x":1.25, "y":4, "w":1.25}, + {"label":"K42 (F7,D7)", "x":2.5, "y":4, "w":1.25}, + {"label":"K46 (F7,C6)", "x":3.75, "y":4, "w":6.25}, + {"label":"K49 (F7,F1)", "x":10, "y":4, "w":1.25}, + {"label":"K4A (F7,F0)", "x":11.25, "y":4, "w":1.25}, + {"label":"K4B (F7,B1)", "x":12.5, "y":4, "w":1.25}, + {"label":"K4D (F7,B3)", "x":14.25, "y":4}, + {"label":"K4E (F7,D3)", "x":15.25, "y":4}, + {"label":"K4F (F7,D5)", "x":16.25, "y":4} + ] + }, + "LAYOUT_68_iso": { + "layout": [ + {"label":"K00 (D2,D4)", "x":0, "y":0}, + {"label":"K01 (D2,D6)", "x":1, "y":0}, + {"label":"K02 (D2,D7)", "x":2, "y":0}, + {"label":"K03 (D2,B4)", "x":3, "y":0}, + {"label":"K04 (D2,B5)", "x":4, "y":0}, + {"label":"K05 (D2,B6)", "x":5, "y":0}, + {"label":"K06 (D2,C6)", "x":6, "y":0}, + {"label":"K07 (D2,F5)", "x":7, "y":0}, + {"label":"K08 (D2,F4)", "x":8, "y":0}, + {"label":"K09 (D2,F1)", "x":9, "y":0}, + {"label":"K0A (D2,F0)", "x":10, "y":0}, + {"label":"K0B (D2,B1)", "x":11, "y":0}, + {"label":"K0C (D2,B2)", "x":12, "y":0}, + {"label":"K0D (D2,B3)", "x":13, "y":0, "w":2}, + {"label":"K0E (D2,D3)", "x":15.25, "y":0}, + {"label":"K0F (D2,D5)", "x":16.25, "y":0}, + + {"label":"K10 (D1,D4)", "x":0, "y":1, "w":1.5}, + {"label":"K11 (D1,D6)", "x":1.5, "y":1}, + {"label":"K12 (D1,D7)", "x":2.5, "y":1}, + {"label":"K13 (D1,B4)", "x":3.5, "y":1}, + {"label":"K14 (D1,B5)", "x":4.5, "y":1}, + {"label":"K15 (D1,B6)", "x":5.5, "y":1}, + {"label":"K16 (D1,C6)", "x":6.5, "y":1}, + {"label":"K17 (D1,F5)", "x":7.5, "y":1}, + {"label":"K18 (D1,F4)", "x":8.5, "y":1}, + {"label":"K19 (D1,F1)", "x":9.5, "y":1}, + {"label":"K1A (D1,F0)", "x":10.5, "y":1}, + {"label":"K1B (D1,B1)", "x":11.5, "y":1}, + {"label":"K1C (D1,B2)", "x":12.5, "y":1}, + {"label":"K1E (D1,D3)", "x":15.25, "y":1}, + {"label":"K1F (D1,D5)", "x":16.25, "y":1}, + + {"label":"K20 (B0,D4)", "x":0, "y":2, "w":1.75}, + {"label":"K21 (B0,D6)", "x":1.75, "y":2}, + {"label":"K22 (B0,D7)", "x":2.75, "y":2}, + {"label":"K23 (B0,B4)", "x":3.75, "y":2}, + {"label":"K24 (B0,B5)", "x":4.75, "y":2}, + {"label":"K25 (B0,B6)", "x":5.75, "y":2}, + {"label":"K26 (B0,C6)", "x":6.75, "y":2}, + {"label":"K27 (B0,F5)", "x":7.75, "y":2}, + {"label":"K28 (B0,F4)", "x":8.75, "y":2}, + {"label":"K29 (B0,F1)", "x":9.75, "y":2}, + {"label":"K2A (B0,F0)", "x":10.75, "y":2}, + {"label":"K2B (B0,B1)", "x":11.75, "y":2}, + {"label":"K2C (B0,B2)", "x":12.75, "y":2}, + {"label":"K2D (B0,B3)", "x":13.75, "y":1, "w":1.25, "h":2}, + + {"label":"K30 (F6,D4)", "x":0, "y":3, "w":1.25}, + {"label":"K31 (F6,D6)", "x":1.25, "y":3}, + {"label":"K32 (F6,D7)", "x":2.25, "y":3}, + {"label":"K33 (F6,B4)", "x":3.25, "y":3}, + {"label":"K34 (F6,B5)", "x":4.25, "y":3}, + {"label":"K35 (F6,B6)", "x":5.25, "y":3}, + {"label":"K36 (F6,C6)", "x":6.25, "y":3}, + {"label":"K37 (F6,F5)", "x":7.25, "y":3}, + {"label":"K38 (F6,F4)", "x":8.25, "y":3}, + {"label":"K39 (F6,F1)", "x":9.25, "y":3}, + {"label":"K3A (F6,F0)", "x":10.25, "y":3}, + {"label":"K3B (F6,B1)", "x":11.25, "y":3}, + {"label":"K3C (F6,B2)", "x":12.25, "y":3, "w":2.75}, + {"label":"K3E (F6,D3)", "x":15.25, "y":3}, + {"label":"K40 (F7,D4)", "x":0, "y":4, "w":1.25}, {"label":"K41 (F7,D6)", "x":1.25, "y":4, "w":1.25}, {"label":"K42 (F7,D7)", "x":2.5, "y":4, "w":1.25}, @@ -76,5 +160,4 @@ ] } } - ,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/" } diff --git a/keyboards/cmm_studio/saka68/hotswap/keymaps/default/keymap.c b/keyboards/cmm_studio/saka68/hotswap/keymaps/default/keymap.c index 8f4ad5b4fb..5b65e62b59 100644 --- a/keyboards/cmm_studio/saka68/hotswap/keymaps/default/keymap.c +++ b/keyboards/cmm_studio/saka68/hotswap/keymaps/default/keymap.c @@ -14,23 +14,23 @@ * along with this program. If not, see . */ - #include QMK_KEYBOARD_H +#include QMK_KEYBOARD_H - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_SPC, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_SPC, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT - ), +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_68_ansi( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_SPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_SPC, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), - [1] = LAYOUT( - KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ), + [1] = LAYOUT_68_ansi( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), - }; +}; diff --git a/keyboards/cmm_studio/saka68/hotswap/keymaps/default/readme.md b/keyboards/cmm_studio/saka68/hotswap/keymaps/default/readme.md deleted file mode 100644 index db71e7842a..0000000000 --- a/keyboards/cmm_studio/saka68/hotswap/keymaps/default/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The default keymap for Saka68 diff --git a/keyboards/cmm_studio/saka68/hotswap/keymaps/via/keymap.c b/keyboards/cmm_studio/saka68/hotswap/keymaps/via/keymap.c index bd94987d87..603ca01ba6 100644 --- a/keyboards/cmm_studio/saka68/hotswap/keymaps/via/keymap.c +++ b/keyboards/cmm_studio/saka68/hotswap/keymaps/via/keymap.c @@ -14,38 +14,39 @@ * along with this program. If not, see . */ - #include QMK_KEYBOARD_H +#include QMK_KEYBOARD_H - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_SPC, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_SPC, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT - ), +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_68_ansi( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_SPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_SPC, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT_68_ansi( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), - [1] = LAYOUT( - KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ), - [2] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ), + [2] = LAYOUT_68_ansi( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), - [3] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + [3] = LAYOUT_68_ansi( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), - }; +}; diff --git a/keyboards/cmm_studio/saka68/hotswap/rules.mk b/keyboards/cmm_studio/saka68/hotswap/rules.mk index 70867503b8..f1b8f4cf8b 100644 --- a/keyboards/cmm_studio/saka68/hotswap/rules.mk +++ b/keyboards/cmm_studio/saka68/hotswap/rules.mk @@ -20,5 +20,4 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# generated by KBFirmware JSON to QMK Parser -# https://noroadsleft.github.io/kbf_qmk_converter/ +LAYOUTS = 68_ansi 68_iso From 3296c26c9829ec261261a273130197235b05b05e Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Sat, 25 Sep 2021 19:25:43 +0000 Subject: [PATCH 126/595] Saka68 Solder Refactor (#14596) * rename LAYOUT to LAYOUT_68_ansi * tidy-up keymaps Adjusts indenting for readability/aesthetics. * add LAYOUT_68_iso macro * enable Community Layout support * add Split Backspace layout variants * remove KBFirmware Parser references * correct keyboard metadata --- keyboards/cmm_studio/saka68/solder/config.h | 2 +- keyboards/cmm_studio/saka68/solder/info.json | 246 +++++++++++++++++- .../saka68/solder/keymaps/default/keymap.c | 16 +- .../saka68/solder/keymaps/via/keymap.c | 40 +-- keyboards/cmm_studio/saka68/solder/rules.mk | 2 + keyboards/cmm_studio/saka68/solder/solder.c | 3 - keyboards/cmm_studio/saka68/solder/solder.h | 45 +++- 7 files changed, 315 insertions(+), 39 deletions(-) diff --git a/keyboards/cmm_studio/saka68/solder/config.h b/keyboards/cmm_studio/saka68/solder/config.h index a886f01a4b..3dd09922cc 100644 --- a/keyboards/cmm_studio/saka68/solder/config.h +++ b/keyboards/cmm_studio/saka68/solder/config.h @@ -23,7 +23,7 @@ #define PRODUCT_ID 0x534B #define DEVICE_VER 0x0001 #define MANUFACTURER CMM.Studio -#define PRODUCT Saka68 +#define PRODUCT Saka68 Solder /* key matrix size */ #define MATRIX_ROWS 5 diff --git a/keyboards/cmm_studio/saka68/solder/info.json b/keyboards/cmm_studio/saka68/solder/info.json index 2719d4ee26..6856294471 100644 --- a/keyboards/cmm_studio/saka68/solder/info.json +++ b/keyboards/cmm_studio/saka68/solder/info.json @@ -1,9 +1,12 @@ { - "keyboard_name": "CMM.Studio Saka68", + "keyboard_name": "CMM.Studio Saka68 Solder", "url": "", - "maintainer": "qmk", + "maintainer": "CMMS-Freather", + "layout_aliases": { + "LAYOUT": "LAYOUT_68_ansi" + }, "layouts": { - "LAYOUT": { + "LAYOUT_68_ansi": { "layout": [ {"label":"K00 (D1,D4)", "x":0, "y":0}, {"label":"K01 (D1,D6)", "x":1, "y":0}, @@ -21,6 +24,7 @@ {"label":"K0D (D1,B3)", "x":13, "y":0, "w":2}, {"label":"K0F (D1,D3)", "x":15.25, "y":0}, {"label":"K0G (D1,D5)", "x":16.25, "y":0}, + {"label":"K10 (D0,D4)", "x":0, "y":1, "w":1.5}, {"label":"K11 (D0,D6)", "x":1.5, "y":1}, {"label":"K12 (D0,D7)", "x":2.5, "y":1}, @@ -37,6 +41,7 @@ {"label":"K1D (D0,B3)", "x":13.5, "y":1, "w":1.5}, {"label":"K1E (D0,D2)", "x":15.25, "y":1}, {"label":"K1F (D0,D3)", "x":16.25, "y":1}, + {"label":"K20 (B0,D4)", "x":0, "y":2, "w":1.75}, {"label":"K21 (B0,D6)", "x":1.75, "y":2}, {"label":"K22 (B0,D7)", "x":2.75, "y":2}, @@ -50,6 +55,7 @@ {"label":"K2A (B0,F0)", "x":10.75, "y":2}, {"label":"K2B (B0,B1)", "x":11.75, "y":2}, {"label":"K2D (B0,B3)", "x":12.75, "y":2, "w":2.25}, + {"label":"K30 (F6,D4)", "x":0, "y":3, "w":2.25}, {"label":"K32 (F6,D7)", "x":2.25, "y":3}, {"label":"K33 (F6,B4)", "x":3.25, "y":3}, @@ -63,6 +69,239 @@ {"label":"K3B (F6,B1)", "x":11.25, "y":3}, {"label":"K3C (F6,B2)", "x":12.25, "y":3, "w":2.75}, {"label":"K3E (F6,D2)", "x":15.25, "y":3}, + + {"label":"K40 (F7,D4)", "x":0, "y":4, "w":1.25}, + {"label":"K41 (F7,D6)", "x":1.25, "y":4, "w":1.25}, + {"label":"K42 (F7,D7)", "x":2.5, "y":4, "w":1.25}, + {"label":"K46 (F7,C6)", "x":3.75, "y":4, "w":6.25}, + {"label":"K4A (F7,F0)", "x":10, "y":4, "w":1.25}, + {"label":"K4B (F7,B1)", "x":11.25, "y":4, "w":1.25}, + {"label":"K4C (F7,B2)", "x":12.5, "y":4, "w":1.25}, + {"label":"K4D (F7,B3)", "x":14.25, "y":4}, + {"label":"K4E (F7,D2)", "x":15.25, "y":4}, + {"label":"K4F (F7,D3)", "x":16.25, "y":4} + ] + }, + "LAYOUT_68_ansi_split_bs": { + "layout": [ + {"label":"K00 (D1,D4)", "x":0, "y":0}, + {"label":"K01 (D1,D6)", "x":1, "y":0}, + {"label":"K02 (D1,D7)", "x":2, "y":0}, + {"label":"K03 (D1,B4)", "x":3, "y":0}, + {"label":"K04 (D1,B5)", "x":4, "y":0}, + {"label":"K05 (D1,B6)", "x":5, "y":0}, + {"label":"K06 (D1,C6)", "x":6, "y":0}, + {"label":"K07 (D1,F5)", "x":7, "y":0}, + {"label":"K08 (D1,F4)", "x":8, "y":0}, + {"label":"K09 (D1,F1)", "x":9, "y":0}, + {"label":"K0A (D1,F0)", "x":10, "y":0}, + {"label":"K0B (D1,B1)", "x":11, "y":0}, + {"label":"K0C (D1,B2)", "x":12, "y":0}, + {"label":"K0D (D1,B3)", "x":13, "y":0}, + {"label":"K0E (D1,D2)", "x":14, "y":0}, + {"label":"K0F (D1,D3)", "x":15.25, "y":0}, + {"label":"K0G (D1,D5)", "x":16.25, "y":0}, + + {"label":"K10 (D0,D4)", "x":0, "y":1, "w":1.5}, + {"label":"K11 (D0,D6)", "x":1.5, "y":1}, + {"label":"K12 (D0,D7)", "x":2.5, "y":1}, + {"label":"K13 (D0,B4)", "x":3.5, "y":1}, + {"label":"K14 (D0,B5)", "x":4.5, "y":1}, + {"label":"K15 (D0,B6)", "x":5.5, "y":1}, + {"label":"K16 (D0,C6)", "x":6.5, "y":1}, + {"label":"K17 (D0,F5)", "x":7.5, "y":1}, + {"label":"K18 (D0,F4)", "x":8.5, "y":1}, + {"label":"K19 (D0,F1)", "x":9.5, "y":1}, + {"label":"K1A (D0,F0)", "x":10.5, "y":1}, + {"label":"K1B (D0,B1)", "x":11.5, "y":1}, + {"label":"K1C (D0,B2)", "x":12.5, "y":1}, + {"label":"K1D (D0,B3)", "x":13.5, "y":1, "w":1.5}, + {"label":"K1E (D0,D2)", "x":15.25, "y":1}, + {"label":"K1F (D0,D3)", "x":16.25, "y":1}, + + {"label":"K20 (B0,D4)", "x":0, "y":2, "w":1.75}, + {"label":"K21 (B0,D6)", "x":1.75, "y":2}, + {"label":"K22 (B0,D7)", "x":2.75, "y":2}, + {"label":"K23 (B0,B4)", "x":3.75, "y":2}, + {"label":"K24 (B0,B5)", "x":4.75, "y":2}, + {"label":"K25 (B0,B6)", "x":5.75, "y":2}, + {"label":"K26 (B0,C6)", "x":6.75, "y":2}, + {"label":"K27 (B0,F5)", "x":7.75, "y":2}, + {"label":"K28 (B0,F4)", "x":8.75, "y":2}, + {"label":"K29 (B0,F1)", "x":9.75, "y":2}, + {"label":"K2A (B0,F0)", "x":10.75, "y":2}, + {"label":"K2B (B0,B1)", "x":11.75, "y":2}, + {"label":"K2D (B0,B3)", "x":12.75, "y":2, "w":2.25}, + + {"label":"K30 (F6,D4)", "x":0, "y":3, "w":2.25}, + {"label":"K32 (F6,D7)", "x":2.25, "y":3}, + {"label":"K33 (F6,B4)", "x":3.25, "y":3}, + {"label":"K34 (F6,B5)", "x":4.25, "y":3}, + {"label":"K35 (F6,B6)", "x":5.25, "y":3}, + {"label":"K36 (F6,C6)", "x":6.25, "y":3}, + {"label":"K37 (F6,F5)", "x":7.25, "y":3}, + {"label":"K38 (F6,F4)", "x":8.25, "y":3}, + {"label":"K39 (F6,F1)", "x":9.25, "y":3}, + {"label":"K3A (F6,F0)", "x":10.25, "y":3}, + {"label":"K3B (F6,B1)", "x":11.25, "y":3}, + {"label":"K3C (F6,B2)", "x":12.25, "y":3, "w":2.75}, + {"label":"K3E (F6,D2)", "x":15.25, "y":3}, + + {"label":"K40 (F7,D4)", "x":0, "y":4, "w":1.25}, + {"label":"K41 (F7,D6)", "x":1.25, "y":4, "w":1.25}, + {"label":"K42 (F7,D7)", "x":2.5, "y":4, "w":1.25}, + {"label":"K46 (F7,C6)", "x":3.75, "y":4, "w":6.25}, + {"label":"K4A (F7,F0)", "x":10, "y":4, "w":1.25}, + {"label":"K4B (F7,B1)", "x":11.25, "y":4, "w":1.25}, + {"label":"K4C (F7,B2)", "x":12.5, "y":4, "w":1.25}, + {"label":"K4D (F7,B3)", "x":14.25, "y":4}, + {"label":"K4E (F7,D2)", "x":15.25, "y":4}, + {"label":"K4F (F7,D3)", "x":16.25, "y":4} + ] + }, + "LAYOUT_68_iso": { + "layout": [ + {"label":"K00 (D1,D4)", "x":0, "y":0}, + {"label":"K01 (D1,D6)", "x":1, "y":0}, + {"label":"K02 (D1,D7)", "x":2, "y":0}, + {"label":"K03 (D1,B4)", "x":3, "y":0}, + {"label":"K04 (D1,B5)", "x":4, "y":0}, + {"label":"K05 (D1,B6)", "x":5, "y":0}, + {"label":"K06 (D1,C6)", "x":6, "y":0}, + {"label":"K07 (D1,F5)", "x":7, "y":0}, + {"label":"K08 (D1,F4)", "x":8, "y":0}, + {"label":"K09 (D1,F1)", "x":9, "y":0}, + {"label":"K0A (D1,F0)", "x":10, "y":0}, + {"label":"K0B (D1,B1)", "x":11, "y":0}, + {"label":"K0C (D1,B2)", "x":12, "y":0}, + {"label":"K0D (D1,B3)", "x":13, "y":0, "w":2}, + {"label":"K0F (D1,D3)", "x":15.25, "y":0}, + {"label":"K0G (D1,D5)", "x":16.25, "y":0}, + + {"label":"K10 (D0,D4)", "x":0, "y":1, "w":1.5}, + {"label":"K11 (D0,D6)", "x":1.5, "y":1}, + {"label":"K12 (D0,D7)", "x":2.5, "y":1}, + {"label":"K13 (D0,B4)", "x":3.5, "y":1}, + {"label":"K14 (D0,B5)", "x":4.5, "y":1}, + {"label":"K15 (D0,B6)", "x":5.5, "y":1}, + {"label":"K16 (D0,C6)", "x":6.5, "y":1}, + {"label":"K17 (D0,F5)", "x":7.5, "y":1}, + {"label":"K18 (D0,F4)", "x":8.5, "y":1}, + {"label":"K19 (D0,F1)", "x":9.5, "y":1}, + {"label":"K1A (D0,F0)", "x":10.5, "y":1}, + {"label":"K1B (D0,B1)", "x":11.5, "y":1}, + {"label":"K1C (D0,B2)", "x":12.5, "y":1}, + {"label":"K1E (D0,D2)", "x":15.25, "y":1}, + {"label":"K1F (D0,D3)", "x":16.25, "y":1}, + + {"label":"K20 (B0,D4)", "x":0, "y":2, "w":1.75}, + {"label":"K21 (B0,D6)", "x":1.75, "y":2}, + {"label":"K22 (B0,D7)", "x":2.75, "y":2}, + {"label":"K23 (B0,B4)", "x":3.75, "y":2}, + {"label":"K24 (B0,B5)", "x":4.75, "y":2}, + {"label":"K25 (B0,B6)", "x":5.75, "y":2}, + {"label":"K26 (B0,C6)", "x":6.75, "y":2}, + {"label":"K27 (B0,F5)", "x":7.75, "y":2}, + {"label":"K28 (B0,F4)", "x":8.75, "y":2}, + {"label":"K29 (B0,F1)", "x":9.75, "y":2}, + {"label":"K2A (B0,F0)", "x":10.75, "y":2}, + {"label":"K2B (B0,B1)", "x":11.75, "y":2}, + {"label":"K2C (B0,B2)", "x":12.75, "y":2}, + {"label":"K2D (B0,B3)", "x":13.75, "y":1, "w":1.25, "h":2}, + + {"label":"K30 (F6,D4)", "x":0, "y":3, "w":1.25}, + {"label":"K31 (F6,D6)", "x":1.25, "y":3}, + {"label":"K32 (F6,D7)", "x":2.25, "y":3}, + {"label":"K33 (F6,B4)", "x":3.25, "y":3}, + {"label":"K34 (F6,B5)", "x":4.25, "y":3}, + {"label":"K35 (F6,B6)", "x":5.25, "y":3}, + {"label":"K36 (F6,C6)", "x":6.25, "y":3}, + {"label":"K37 (F6,F5)", "x":7.25, "y":3}, + {"label":"K38 (F6,F4)", "x":8.25, "y":3}, + {"label":"K39 (F6,F1)", "x":9.25, "y":3}, + {"label":"K3A (F6,F0)", "x":10.25, "y":3}, + {"label":"K3B (F6,B1)", "x":11.25, "y":3}, + {"label":"K3C (F6,B2)", "x":12.25, "y":3, "w":2.75}, + {"label":"K3E (F6,D2)", "x":15.25, "y":3}, + + {"label":"K40 (F7,D4)", "x":0, "y":4, "w":1.25}, + {"label":"K41 (F7,D6)", "x":1.25, "y":4, "w":1.25}, + {"label":"K42 (F7,D7)", "x":2.5, "y":4, "w":1.25}, + {"label":"K46 (F7,C6)", "x":3.75, "y":4, "w":6.25}, + {"label":"K4A (F7,F0)", "x":10, "y":4, "w":1.25}, + {"label":"K4B (F7,B1)", "x":11.25, "y":4, "w":1.25}, + {"label":"K4C (F7,B2)", "x":12.5, "y":4, "w":1.25}, + {"label":"K4D (F7,B3)", "x":14.25, "y":4}, + {"label":"K4E (F7,D2)", "x":15.25, "y":4}, + {"label":"K4F (F7,D3)", "x":16.25, "y":4} + ] + }, + "LAYOUT_68_iso_split_bs": { + "layout": [ + {"label":"K00 (D1,D4)", "x":0, "y":0}, + {"label":"K01 (D1,D6)", "x":1, "y":0}, + {"label":"K02 (D1,D7)", "x":2, "y":0}, + {"label":"K03 (D1,B4)", "x":3, "y":0}, + {"label":"K04 (D1,B5)", "x":4, "y":0}, + {"label":"K05 (D1,B6)", "x":5, "y":0}, + {"label":"K06 (D1,C6)", "x":6, "y":0}, + {"label":"K07 (D1,F5)", "x":7, "y":0}, + {"label":"K08 (D1,F4)", "x":8, "y":0}, + {"label":"K09 (D1,F1)", "x":9, "y":0}, + {"label":"K0A (D1,F0)", "x":10, "y":0}, + {"label":"K0B (D1,B1)", "x":11, "y":0}, + {"label":"K0C (D1,B2)", "x":12, "y":0}, + {"label":"K0D (D1,B3)", "x":13, "y":0}, + {"label":"K0E (D1,D2)", "x":14, "y":0}, + {"label":"K0F (D1,D3)", "x":15.25, "y":0}, + {"label":"K0G (D1,D5)", "x":16.25, "y":0}, + + {"label":"K10 (D0,D4)", "x":0, "y":1, "w":1.5}, + {"label":"K11 (D0,D6)", "x":1.5, "y":1}, + {"label":"K12 (D0,D7)", "x":2.5, "y":1}, + {"label":"K13 (D0,B4)", "x":3.5, "y":1}, + {"label":"K14 (D0,B5)", "x":4.5, "y":1}, + {"label":"K15 (D0,B6)", "x":5.5, "y":1}, + {"label":"K16 (D0,C6)", "x":6.5, "y":1}, + {"label":"K17 (D0,F5)", "x":7.5, "y":1}, + {"label":"K18 (D0,F4)", "x":8.5, "y":1}, + {"label":"K19 (D0,F1)", "x":9.5, "y":1}, + {"label":"K1A (D0,F0)", "x":10.5, "y":1}, + {"label":"K1B (D0,B1)", "x":11.5, "y":1}, + {"label":"K1C (D0,B2)", "x":12.5, "y":1}, + {"label":"K1E (D0,D2)", "x":15.25, "y":1}, + {"label":"K1F (D0,D3)", "x":16.25, "y":1}, + + {"label":"K20 (B0,D4)", "x":0, "y":2, "w":1.75}, + {"label":"K21 (B0,D6)", "x":1.75, "y":2}, + {"label":"K22 (B0,D7)", "x":2.75, "y":2}, + {"label":"K23 (B0,B4)", "x":3.75, "y":2}, + {"label":"K24 (B0,B5)", "x":4.75, "y":2}, + {"label":"K25 (B0,B6)", "x":5.75, "y":2}, + {"label":"K26 (B0,C6)", "x":6.75, "y":2}, + {"label":"K27 (B0,F5)", "x":7.75, "y":2}, + {"label":"K28 (B0,F4)", "x":8.75, "y":2}, + {"label":"K29 (B0,F1)", "x":9.75, "y":2}, + {"label":"K2A (B0,F0)", "x":10.75, "y":2}, + {"label":"K2B (B0,B1)", "x":11.75, "y":2}, + {"label":"K2C (B0,B2)", "x":12.75, "y":2}, + {"label":"K2D (B0,B3)", "x":13.75, "y":1, "w":1.25, "h":2}, + + {"label":"K30 (F6,D4)", "x":0, "y":3, "w":1.25}, + {"label":"K31 (F6,D6)", "x":1.25, "y":3}, + {"label":"K32 (F6,D7)", "x":2.25, "y":3}, + {"label":"K33 (F6,B4)", "x":3.25, "y":3}, + {"label":"K34 (F6,B5)", "x":4.25, "y":3}, + {"label":"K35 (F6,B6)", "x":5.25, "y":3}, + {"label":"K36 (F6,C6)", "x":6.25, "y":3}, + {"label":"K37 (F6,F5)", "x":7.25, "y":3}, + {"label":"K38 (F6,F4)", "x":8.25, "y":3}, + {"label":"K39 (F6,F1)", "x":9.25, "y":3}, + {"label":"K3A (F6,F0)", "x":10.25, "y":3}, + {"label":"K3B (F6,B1)", "x":11.25, "y":3}, + {"label":"K3C (F6,B2)", "x":12.25, "y":3, "w":2.75}, + {"label":"K3E (F6,D2)", "x":15.25, "y":3}, + {"label":"K40 (F7,D4)", "x":0, "y":4, "w":1.25}, {"label":"K41 (F7,D6)", "x":1.25, "y":4, "w":1.25}, {"label":"K42 (F7,D7)", "x":2.5, "y":4, "w":1.25}, @@ -76,5 +315,4 @@ ] } } - ,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/" } diff --git a/keyboards/cmm_studio/saka68/solder/keymaps/default/keymap.c b/keyboards/cmm_studio/saka68/solder/keymaps/default/keymap.c index 88f6db4ed3..0c99835847 100644 --- a/keyboards/cmm_studio/saka68/solder/keymaps/default/keymap.c +++ b/keyboards/cmm_studio/saka68/solder/keymaps/default/keymap.c @@ -17,20 +17,20 @@ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( + [0] = LAYOUT_68_ansi( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ), - [1] = LAYOUT( - KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + [1] = LAYOUT_68_ansi( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), }; diff --git a/keyboards/cmm_studio/saka68/solder/keymaps/via/keymap.c b/keyboards/cmm_studio/saka68/solder/keymaps/via/keymap.c index bd55f0d85b..12334284a0 100644 --- a/keyboards/cmm_studio/saka68/solder/keymaps/via/keymap.c +++ b/keyboards/cmm_studio/saka68/solder/keymaps/via/keymap.c @@ -17,35 +17,35 @@ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( + [0] = LAYOUT_68_ansi( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ), - [1] = LAYOUT( - KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + [1] = LAYOUT_68_ansi( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), - [2] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + [2] = LAYOUT_68_ansi( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), - [3] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + [3] = LAYOUT_68_ansi( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), }; diff --git a/keyboards/cmm_studio/saka68/solder/rules.mk b/keyboards/cmm_studio/saka68/solder/rules.mk index f2e5379ac1..077b060eea 100644 --- a/keyboards/cmm_studio/saka68/solder/rules.mk +++ b/keyboards/cmm_studio/saka68/solder/rules.mk @@ -19,3 +19,5 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output + +LAYOUTS = 68_ansi 68_iso diff --git a/keyboards/cmm_studio/saka68/solder/solder.c b/keyboards/cmm_studio/saka68/solder/solder.c index 5ff4cf0b97..195c14023b 100644 --- a/keyboards/cmm_studio/saka68/solder/solder.c +++ b/keyboards/cmm_studio/saka68/solder/solder.c @@ -15,6 +15,3 @@ */ #include "solder.h" - -// generated by KBFirmware JSON to QMK Parser -// https://noroadsleft.github.io/kbf_qmk_converter/ diff --git a/keyboards/cmm_studio/saka68/solder/solder.h b/keyboards/cmm_studio/saka68/solder/solder.h index 4d1d02163a..e1945eab46 100644 --- a/keyboards/cmm_studio/saka68/solder/solder.h +++ b/keyboards/cmm_studio/saka68/solder/solder.h @@ -18,7 +18,7 @@ #include "quantum.h" -#define LAYOUT( \ +#define LAYOUT_68_ansi( \ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0F, K0G, \ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, \ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ @@ -32,5 +32,44 @@ { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, K4E, K4F, KC_NO }, \ } -// generated by KBFirmware JSON to QMK Parser -// https://noroadsleft.github.io/kbf_qmk_converter/ +#define LAYOUT_68_ansi_split_bs( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3E, \ + K40, K41, K42, K46, K4A, K4B, K4C, K4D, K4E, K4F \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, KC_NO }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, KC_NO, KC_NO, KC_NO }, \ + { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, KC_NO, K3E, KC_NO, KC_NO }, \ + { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, K4E, K4F, KC_NO }, \ +} + +#define LAYOUT_68_iso( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0F, K0G, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1E, K1F, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3E, \ + K40, K41, K42, K46, K4A, K4B, K4C, K4D, K4E, K4F \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, KC_NO, K0F, K0G }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, KC_NO, K1E, K1F, KC_NO }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, KC_NO, KC_NO, KC_NO }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, KC_NO, K3E, KC_NO, KC_NO }, \ + { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, K4E, K4F, KC_NO }, \ +} + +#define LAYOUT_68_iso_split_bs( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1E, K1F, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3E, \ + K40, K41, K42, K46, K4A, K4B, K4C, K4D, K4E, K4F \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, KC_NO, K1E, K1F, KC_NO }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, KC_NO, KC_NO, KC_NO }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, KC_NO, K3E, KC_NO, KC_NO }, \ + { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, K4E, K4F, KC_NO }, \ +} From 8c76e1ec08390316127f9eeb076033a0e1ecf8b3 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Sun, 26 Sep 2021 04:53:57 +0000 Subject: [PATCH 127/595] FLX Virgo: metadata clean-up (#14605) * correct maintainer field in info.json * remove KBFirmware Parser references --- keyboards/flx/virgo/config.h | 3 --- keyboards/flx/virgo/info.json | 3 +-- 2 files changed, 1 insertion(+), 5 deletions(-) diff --git a/keyboards/flx/virgo/config.h b/keyboards/flx/virgo/config.h index cd1a8d7b0b..8ceb1e4ed1 100644 --- a/keyboards/flx/virgo/config.h +++ b/keyboards/flx/virgo/config.h @@ -70,6 +70,3 @@ along with this program. If not, see . #define RGBLIGHT_EFFECT_RGB_TEST #define RGBLIGHT_EFFECT_ALTERNATING #endif - -// generated by KBFirmware JSON to QMK Parser -// https://noroadsleft.github.io/kbf_qmk_converter/ diff --git a/keyboards/flx/virgo/info.json b/keyboards/flx/virgo/info.json index 435854aa52..5184e4fb15 100644 --- a/keyboards/flx/virgo/info.json +++ b/keyboards/flx/virgo/info.json @@ -1,7 +1,7 @@ { "keyboard_name": "FLX Virgo", "url": "", - "maintainer": "qmk", + "maintainer": "mechmerlin", "layouts": { "LAYOUT": { "layout": [ @@ -99,5 +99,4 @@ ] } } - ,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/" } From 532cfd56ca47e5fdba2d759747dd4ac358e0af3a Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Sun, 26 Sep 2021 05:22:04 +0000 Subject: [PATCH 128/595] Exclusive E6 RGB Refactor (#14604) --- keyboards/exclusive/e6_rgb/e6_rgb.h | 102 +- keyboards/exclusive/e6_rgb/info.json | 1537 +++-------------- .../exclusive/e6_rgb/keymaps/60_ansi/keymap.c | 29 - .../keymaps/60_ansi_split_bs_rshift/keymap.c | 18 + .../keymaps/60_ansi_split_bs_shift/keymap.c | 16 - .../exclusive/e6_rgb/keymaps/60_hhkb/keymap.c | 24 +- .../e6_rgb/keymaps/60_tsangan_hhkb/keymap.c | 18 + .../exclusive/e6_rgb/keymaps/60_wkl/keymap.c | 16 - .../e6_rgb/keymaps/60_wkl_split_bs/keymap.c | 16 - .../exclusive/e6_rgb/keymaps/allleds/keymap.c | 26 +- .../exclusive/e6_rgb/keymaps/default/keymap.c | 22 +- .../exclusive/e6_rgb/keymaps/via/keymap.c | 52 +- keyboards/exclusive/e6_rgb/readme.md | 6 +- keyboards/exclusive/e6_rgb/rules.mk | 8 +- 14 files changed, 426 insertions(+), 1464 deletions(-) delete mode 100644 keyboards/exclusive/e6_rgb/keymaps/60_ansi/keymap.c create mode 100644 keyboards/exclusive/e6_rgb/keymaps/60_ansi_split_bs_rshift/keymap.c delete mode 100644 keyboards/exclusive/e6_rgb/keymaps/60_ansi_split_bs_shift/keymap.c create mode 100644 keyboards/exclusive/e6_rgb/keymaps/60_tsangan_hhkb/keymap.c delete mode 100644 keyboards/exclusive/e6_rgb/keymaps/60_wkl/keymap.c delete mode 100644 keyboards/exclusive/e6_rgb/keymaps/60_wkl_split_bs/keymap.c diff --git a/keyboards/exclusive/e6_rgb/e6_rgb.h b/keyboards/exclusive/e6_rgb/e6_rgb.h index df105863b7..a49d75d09a 100644 --- a/keyboards/exclusive/e6_rgb/e6_rgb.h +++ b/keyboards/exclusive/e6_rgb/e6_rgb.h @@ -6,79 +6,67 @@ #include "quantum.h" +#define ___ KC_NO + // This a shortcut to help you visually see your layout. // The first section contains all of the arguements // The second converts the arguments into a two-dimensional array #define LAYOUT_60_ansi( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \ - k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, \ - k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \ - k40, k42, k43, k47, k48, k49, k4a, k4b \ -) \ -{ \ - {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, KC_NO}, \ - {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e}, \ - {k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, k0e}, \ - {k30, k32, k33, k34, k35, k36, k37, k38, KC_NO, k39, k3a, k3b, k3c, KC_NO}, \ - {k40, k42, k43, KC_NO, KC_NO, KC_NO, k47, KC_NO, KC_NO, KC_NO, k48, k49, k4a, k4b} \ -} - -#define LAYOUT_60_wkl( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \ - k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, \ - k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \ - k40, k42, k43, k47, k49, k4a, k4b \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K2D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ + K30, K31, K32, K33, K34, K35, K36, K37, K39, K3A, K3B, K3C, \ + K40, K41, K42, K46, K4A, K4B, K4C, K4D \ ) \ { \ - {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, KC_NO}, \ - {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e}, \ - {k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, k0e}, \ - {k30, k32, k33, k34, k35, k36, k37, k38, KC_NO, k39, k3a, k3b, k3c, k3d}, \ - {k40, k42, k43, KC_NO, KC_NO, KC_NO, k47, KC_NO, KC_NO, KC_NO, KC_NO, k49, k4a, k4b} \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, ___ }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, ___, K39, K3A, K3B, K3C, ___ }, \ + { K40, K41, K42, ___, ___, ___, K46, ___, ___, ___, K4A, K4B, K4C, K4D } \ } #define LAYOUT_60_hhkb( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \ - k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, \ - k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \ - k42, k43, k47, k49, k4a \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ + K30, K31, K32, K33, K34, K35, K36, K37, K39, K3A, K3B, K3C, K3D, \ + K41, K42, K46, K4B, K4C \ ) \ { \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e}, \ - { k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, k0e}, \ - { k30, k32, k33, k34, k35, k36, k37, k38, KC_NO, k39, k3a, k3b, k3c, k3d}, \ - {KC_NO, k42, k43, KC_NO, KC_NO, KC_NO, k47, KC_NO, KC_NO, KC_NO, KC_NO, k49, k4a, KC_NO} \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, ___, K39, K3A, K3B, K3C, K3D }, \ + { ___, K41, K42, ___, ___, ___, K46, ___, ___, ___, ___, K4B, K4C, ___ } \ } -#define LAYOUT_60_wkl_split_bs( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \ - k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, \ - k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \ - k40, k42, k43, k47, k49, k4a, k4b \ +#define LAYOUT_60_tsangan_hhkb( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ + K30, K31, K32, K33, K34, K35, K36, K37, K39, K3A, K3B, K3C, K3D, \ + K40, K41, K42, K46, K4B, K4C, K4D \ ) \ { \ - {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \ - {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e}, \ - {k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, k0e}, \ - {k30, k32, k33, k34, k35, k36, k37, k38, KC_NO, k39, k3a, k3b, k3c, k3d}, \ - {k40, k42, k43, KC_NO, KC_NO, KC_NO, k47, KC_NO, KC_NO, KC_NO, KC_NO, k49, k4a, k4b} \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, ___, K39, K3A, K3B, K3C, K3D }, \ + { K40, K41, K42, ___, ___, ___, K46, ___, ___, ___, ___, K4B, K4C, K4D } \ } -#define LAYOUT_60_ansi_split_bs_shift( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e, \ - k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, \ - k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \ - k40, k42, k43, k47, k48, k49, k4a, k4b \ + +#define LAYOUT_60_ansi_split_bs_rshift( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ + K30, K31, K32, K33, K34, K35, K36, K37, K39, K3A, K3B, K3C, K3D, \ + K40, K41, K42, K46, K4A, K4B, K4C, K4D \ ) \ { \ - {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \ - {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1e}, \ - {k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2e, k0e}, \ - {k30, k32, k33, k34, k35, k36, k37, k38, KC_NO, k39, k3a, k3b, k3c, k3d}, \ - {k40, k42, k43, KC_NO, KC_NO, KC_NO, k47, KC_NO, KC_NO, KC_NO, k48, k49, k4a, k4b} \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, ___, K39, K3A, K3B, K3C, K3D }, \ + { K40, K41, K42, ___, ___, ___, K46, ___, ___, ___, K4A, K4B, K4C, K4D } \ } diff --git a/keyboards/exclusive/e6_rgb/info.json b/keyboards/exclusive/e6_rgb/info.json index 398134acc4..c08cd12ae6 100644 --- a/keyboards/exclusive/e6_rgb/info.json +++ b/keyboards/exclusive/e6_rgb/info.json @@ -1,1285 +1,286 @@ { "keyboard_name": "e6_rgb", "url": "", - "maintainer": "qmk", + "maintainer": "yulei", + "layout_aliases": { + "LAYOUT_60_wkl_split_bs": "LAYOUT_60_tsangan_hhkb" + }, "layouts": { - "LAYOUT_60_wkl": { + "LAYOUT_60_ansi": { "layout": [ - { - "label": "~", - "x": 0, - "y": 0 - }, - { - "label": "!", - "x": 1, - "y": 0 - }, - { - "label": "@", - "x": 2, - "y": 0 - }, - { - "label": "#", - "x": 3, - "y": 0 - }, - { - "label": "$", - "x": 4, - "y": 0 - }, - { - "label": "%", - "x": 5, - "y": 0 - }, - { - "label": "^", - "x": 6, - "y": 0 - }, - { - "label": "&", - "x": 7, - "y": 0 - }, - { - "label": "*", - "x": 8, - "y": 0 - }, - { - "label": "(", - "x": 9, - "y": 0 - }, - { - "label": ")", - "x": 10, - "y": 0 - }, - { - "label": "_", - "x": 11, - "y": 0 - }, - { - "label": "+", - "x": 12, - "y": 0 - }, - { - "label": "Backspace", - "x": 13, - "y": 0, - "w": 2 - }, - { - "label": "Tab", - "x": 0, - "y": 1, - "w": 1.5 - }, - { - "label": "Q", - "x": 1.5, - "y": 1 - }, - { - "label": "W", - "x": 2.5, - "y": 1 - }, - { - "label": "E", - "x": 3.5, - "y": 1 - }, - { - "label": "R", - "x": 4.5, - "y": 1 - }, - { - "label": "T", - "x": 5.5, - "y": 1 - }, - { - "label": "Y", - "x": 6.5, - "y": 1 - }, - { - "label": "U", - "x": 7.5, - "y": 1 - }, - { - "label": "I", - "x": 8.5, - "y": 1 - }, - { - "label": "O", - "x": 9.5, - "y": 1 - }, - { - "label": "P", - "x": 10.5, - "y": 1 - }, - { - "label": "{", - "x": 11.5, - "y": 1 - }, - { - "label": "}", - "x": 12.5, - "y": 1 - }, - { - "label": "|", - "x": 13.5, - "y": 1, - "w": 1.5 - }, - { - "label": "Caps Lock", - "x": 0, - "y": 2, - "w": 1.75 - }, - { - "label": "A", - "x": 1.75, - "y": 2 - }, - { - "label": "S", - "x": 2.75, - "y": 2 - }, - { - "label": "D", - "x": 3.75, - "y": 2 - }, - { - "label": "F", - "x": 4.75, - "y": 2 - }, - { - "label": "G", - "x": 5.75, - "y": 2 - }, - { - "label": "H", - "x": 6.75, - "y": 2 - }, - { - "label": "J", - "x": 7.75, - "y": 2 - }, - { - "label": "K", - "x": 8.75, - "y": 2 - }, - { - "label": "L", - "x": 9.75, - "y": 2 - }, - { - "label": ":", - "x": 10.75, - "y": 2 - }, - { - "label": "\"", - "x": 11.75, - "y": 2 - }, - { - "label": "Enter", - "x": 12.75, - "y": 2, - "w": 2.25 - }, - { - "label": "Shift", - "x": 0, - "y": 3, - "w": 2.25 - }, - { - "label": "Z", - "x": 2.25, - "y": 3 - }, - { - "label": "X", - "x": 3.25, - "y": 3 - }, - { - "label": "C", - "x": 4.25, - "y": 3 - }, - { - "label": "V", - "x": 5.25, - "y": 3 - }, - { - "label": "B", - "x": 6.25, - "y": 3 - }, - { - "label": "N", - "x": 7.25, - "y": 3 - }, - { - "label": "M", - "x": 8.25, - "y": 3 - }, - { - "label": "<", - "x": 9.25, - "y": 3 - }, - { - "label": ">", - "x": 10.25, - "y": 3 - }, - { - "label": "?", - "x": 11.25, - "y": 3 - }, - { - "label": "Shift", - "x": 12.25, - "y": 3, - "w": 1.75 - }, - { - "label": "Fn", - "x": 14, - "y": 3 - }, - { - "label": "Ctrl", - "x": 0, - "y": 4, - "w": 1.5 - }, - { - "label": "Win", - "x": 1.5, - "y": 4 - }, - { - "label": "Alt", - "x": 2.5, - "y": 4, - "w": 1.5 - }, - { - "x": 4, - "y": 4, - "w": 7 - }, - { - "label": "Alt", - "x": 11, - "y": 4, - "w": 1.5 - }, - { - "label": "Win", - "x": 12.5, - "y": 4 - }, - { - "label": "Ctrl", - "x": 13.5, - "y": 4, - "w": 1.5 - } + {"label":"~", "x":0, "y":0}, + {"label":"!", "x":1, "y":0}, + {"label":"@", "x":2, "y":0}, + {"label":"#", "x":3, "y":0}, + {"label":"$", "x":4, "y":0}, + {"label":"%", "x":5, "y":0}, + {"label":"^", "x":6, "y":0}, + {"label":"&", "x":7, "y":0}, + {"label":"*", "x":8, "y":0}, + {"label":"(", "x":9, "y":0}, + {"label":")", "x":10, "y":0}, + {"label":"_", "x":11, "y":0}, + {"label":"+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0, "w":2}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"{", "x":11.5, "y":1}, + {"label":"}", "x":12.5, "y":1}, + {"label":"|", "x":13.5, "y":1, "w":1.5}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":":", "x":10.75, "y":2}, + {"label":"\"", "x":11.75, "y":2}, + {"label":"Enter", "x":12.75, "y":2, "w":2.25}, + + {"label":"Shift", "x":0, "y":3, "w":2.25}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":"<", "x":9.25, "y":3}, + {"label":">", "x":10.25, "y":3}, + {"label":"?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":2.75}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"Win", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":6.25}, + {"label":"Alt", "x":10, "y":4, "w":1.25}, + {"label":"Win", "x":11.25, "y":4, "w":1.25}, + {"label":"Menu", "x":12.5, "y":4, "w":1.25}, + {"label":"Ctrl", "x":13.75, "y":4, "w":1.25} ] }, - "LAYOUT_60_ansi": { + "LAYOUT_60_hhkb": { "layout": [ - { - "label": "~", - "x": 0, - "y": 0 - }, - { - "label": "!", - "x": 1, - "y": 0 - }, - { - "label": "@", - "x": 2, - "y": 0 - }, - { - "label": "#", - "x": 3, - "y": 0 - }, - { - "label": "$", - "x": 4, - "y": 0 - }, - { - "label": "%", - "x": 5, - "y": 0 - }, - { - "label": "^", - "x": 6, - "y": 0 - }, - { - "label": "&", - "x": 7, - "y": 0 - }, - { - "label": "*", - "x": 8, - "y": 0 - }, - { - "label": "(", - "x": 9, - "y": 0 - }, - { - "label": ")", - "x": 10, - "y": 0 - }, - { - "label": "_", - "x": 11, - "y": 0 - }, - { - "label": "+", - "x": 12, - "y": 0 - }, - { - "label": "Backspace", - "x": 13, - "y": 0, - "w": 2 - }, - { - "label": "Tab", - "x": 0, - "y": 1, - "w": 1.5 - }, - { - "label": "Q", - "x": 1.5, - "y": 1 - }, - { - "label": "W", - "x": 2.5, - "y": 1 - }, - { - "label": "E", - "x": 3.5, - "y": 1 - }, - { - "label": "R", - "x": 4.5, - "y": 1 - }, - { - "label": "T", - "x": 5.5, - "y": 1 - }, - { - "label": "Y", - "x": 6.5, - "y": 1 - }, - { - "label": "U", - "x": 7.5, - "y": 1 - }, - { - "label": "I", - "x": 8.5, - "y": 1 - }, - { - "label": "O", - "x": 9.5, - "y": 1 - }, - { - "label": "P", - "x": 10.5, - "y": 1 - }, - { - "label": "{", - "x": 11.5, - "y": 1 - }, - { - "label": "}", - "x": 12.5, - "y": 1 - }, - { - "label": "|", - "x": 13.5, - "y": 1, - "w": 1.5 - }, - { - "label": "Caps Lock", - "x": 0, - "y": 2, - "w": 1.75 - }, - { - "label": "A", - "x": 1.75, - "y": 2 - }, - { - "label": "S", - "x": 2.75, - "y": 2 - }, - { - "label": "D", - "x": 3.75, - "y": 2 - }, - { - "label": "F", - "x": 4.75, - "y": 2 - }, - { - "label": "G", - "x": 5.75, - "y": 2 - }, - { - "label": "H", - "x": 6.75, - "y": 2 - }, - { - "label": "J", - "x": 7.75, - "y": 2 - }, - { - "label": "K", - "x": 8.75, - "y": 2 - }, - { - "label": "L", - "x": 9.75, - "y": 2 - }, - { - "label": ":", - "x": 10.75, - "y": 2 - }, - { - "label": "\"", - "x": 11.75, - "y": 2 - }, - { - "label": "Enter", - "x": 12.75, - "y": 2, - "w": 2.25 - }, - { - "label": "Shift", - "x": 0, - "y": 3, - "w": 2.25 - }, - { - "label": "Z", - "x": 2.25, - "y": 3 - }, - { - "label": "X", - "x": 3.25, - "y": 3 - }, - { - "label": "C", - "x": 4.25, - "y": 3 - }, - { - "label": "V", - "x": 5.25, - "y": 3 - }, - { - "label": "B", - "x": 6.25, - "y": 3 - }, - { - "label": "N", - "x": 7.25, - "y": 3 - }, - { - "label": "M", - "x": 8.25, - "y": 3 - }, - { - "label": "<", - "x": 9.25, - "y": 3 - }, - { - "label": ">", - "x": 10.25, - "y": 3 - }, - { - "label": "?", - "x": 11.25, - "y": 3 - }, - { - "label": "Shift", - "x": 12.25, - "y": 3, - "w": 2.75 - }, - { - "label": "Ctrl", - "x": 0, - "y": 4, - "w": 1.25 - }, - { - "label": "Win", - "x": 1.25, - "y": 4, - "w": 1.25 - }, - { - "label": "Alt", - "x": 2.5, - "y": 4, - "w": 1.25 - }, - { - "x": 3.75, - "y": 4, - "w": 6.25 - }, - { - "label": "Alt", - "x": 10, - "y": 4, - "w": 1.25 - }, - { - "label": "Win", - "x": 11.25, - "y": 4, - "w": 1.25 - }, - { - "label": "Menu", - "x": 12.5, - "y": 4, - "w": 1.25 - }, - { - "label": "Ctrl", - "x": 13.75, - "y": 4, - "w": 1.25 - } + {"label":"Esc", "x":0, "y":0}, + {"label":"!", "x":1, "y":0}, + {"label":"@", "x":2, "y":0}, + {"label":"#", "x":3, "y":0}, + {"label":"$", "x":4, "y":0}, + {"label":"%", "x":5, "y":0}, + {"label":"^", "x":6, "y":0}, + {"label":"&", "x":7, "y":0}, + {"label":"*", "x":8, "y":0}, + {"label":"(", "x":9, "y":0}, + {"label":")", "x":10, "y":0}, + {"label":"_", "x":11, "y":0}, + {"label":"+", "x":12, "y":0}, + {"label":"|", "x":13, "y":0}, + {"label":"~", "x":14, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"{", "x":11.5, "y":1}, + {"label":"}", "x":12.5, "y":1}, + {"label":"Backspace", "x":13.5, "y":1, "w":1.5}, + + {"label":"Control", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":":", "x":10.75, "y":2}, + {"label":"\"", "x":11.75, "y":2}, + {"label":"Enter", "x":12.75, "y":2, "w":2.25}, + + {"label":"Shift", "x":0, "y":3, "w":2.25}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":"<", "x":9.25, "y":3}, + {"label":">", "x":10.25, "y":3}, + {"label":"?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"Fn", "x":14, "y":3}, + {"label":"Win", "x":1.5, "y":4}, + {"label":"Alt", "x":2.5, "y":4, "w":1.5}, + {"x":4, "y":4, "w":7}, + {"label":"Alt", "x":11, "y":4, "w":1.5}, + {"label":"Win", "x":12.5, "y":4} ] }, - "LAYOUT_60_hhkb": { + "LAYOUT_60_tsangan_hhkb": { "layout": [ - { - "label": "Esc", - "x": 0, - "y": 0 - }, - { - "label": "!", - "x": 1, - "y": 0 - }, - { - "label": "@", - "x": 2, - "y": 0 - }, - { - "label": "#", - "x": 3, - "y": 0 - }, - { - "label": "$", - "x": 4, - "y": 0 - }, - { - "label": "%", - "x": 5, - "y": 0 - }, - { - "label": "^", - "x": 6, - "y": 0 - }, - { - "label": "&", - "x": 7, - "y": 0 - }, - { - "label": "*", - "x": 8, - "y": 0 - }, - { - "label": "(", - "x": 9, - "y": 0 - }, - { - "label": ")", - "x": 10, - "y": 0 - }, - { - "label": "_", - "x": 11, - "y": 0 - }, - { - "label": "+", - "x": 12, - "y": 0 - }, - { - "label": "|", - "x": 13, - "y": 0 - }, - { - "label": "~", - "x": 14, - "y": 0 - }, - { - "label": "Tab", - "x": 0, - "y": 1, - "w": 1.5 - }, - { - "label": "Q", - "x": 1.5, - "y": 1 - }, - { - "label": "W", - "x": 2.5, - "y": 1 - }, - { - "label": "E", - "x": 3.5, - "y": 1 - }, - { - "label": "R", - "x": 4.5, - "y": 1 - }, - { - "label": "T", - "x": 5.5, - "y": 1 - }, - { - "label": "Y", - "x": 6.5, - "y": 1 - }, - { - "label": "U", - "x": 7.5, - "y": 1 - }, - { - "label": "I", - "x": 8.5, - "y": 1 - }, - { - "label": "O", - "x": 9.5, - "y": 1 - }, - { - "label": "P", - "x": 10.5, - "y": 1 - }, - { - "label": "{", - "x": 11.5, - "y": 1 - }, - { - "label": "}", - "x": 12.5, - "y": 1 - }, - { - "label": "Backspace", - "x": 13.5, - "y": 1, - "w": 1.5 - }, - { - "label": "Control", - "x": 0, - "y": 2, - "w": 1.75 - }, - { - "label": "A", - "x": 1.75, - "y": 2 - }, - { - "label": "S", - "x": 2.75, - "y": 2 - }, - { - "label": "D", - "x": 3.75, - "y": 2 - }, - { - "label": "F", - "x": 4.75, - "y": 2 - }, - { - "label": "G", - "x": 5.75, - "y": 2 - }, - { - "label": "H", - "x": 6.75, - "y": 2 - }, - { - "label": "J", - "x": 7.75, - "y": 2 - }, - { - "label": "K", - "x": 8.75, - "y": 2 - }, - { - "label": "L", - "x": 9.75, - "y": 2 - }, - { - "label": ":", - "x": 10.75, - "y": 2 - }, - { - "label": "\"", - "x": 11.75, - "y": 2 - }, - { - "label": "Enter", - "x": 12.75, - "y": 2, - "w": 2.25 - }, - { - "label": "Shift", - "x": 0, - "y": 3, - "w": 2.25 - }, - { - "label": "Z", - "x": 2.25, - "y": 3 - }, - { - "label": "X", - "x": 3.25, - "y": 3 - }, - { - "label": "C", - "x": 4.25, - "y": 3 - }, - { - "label": "V", - "x": 5.25, - "y": 3 - }, - { - "label": "B", - "x": 6.25, - "y": 3 - }, - { - "label": "N", - "x": 7.25, - "y": 3 - }, - { - "label": "M", - "x": 8.25, - "y": 3 - }, - { - "label": "<", - "x": 9.25, - "y": 3 - }, - { - "label": ">", - "x": 10.25, - "y": 3 - }, - { - "label": "?", - "x": 11.25, - "y": 3 - }, - { - "label": "Shift", - "x": 12.25, - "y": 3, - "w": 1.75 - }, - { - "label": "Fn", - "x": 14, - "y": 3 - }, - { - "label": "Win", - "x": 1.5, - "y": 4 - }, - { - "label": "Alt", - "x": 2.5, - "y": 4, - "w": 1.5 - }, - { - "x": 4, - "y": 4, - "w": 7 - }, - { - "label": "Alt", - "x": 11, - "y": 4, - "w": 1.5 - }, - { - "label": "Win", - "x": 12.5, - "y": 4 - } + {"label":"Esc", "x":0, "y":0}, + {"label":"!", "x":1, "y":0}, + {"label":"@", "x":2, "y":0}, + {"label":"#", "x":3, "y":0}, + {"label":"$", "x":4, "y":0}, + {"label":"%", "x":5, "y":0}, + {"label":"^", "x":6, "y":0}, + {"label":"&", "x":7, "y":0}, + {"label":"*", "x":8, "y":0}, + {"label":"(", "x":9, "y":0}, + {"label":")", "x":10, "y":0}, + {"label":"_", "x":11, "y":0}, + {"label":"+", "x":12, "y":0}, + {"label":"|", "x":13, "y":0}, + {"label":"~", "x":14, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"{", "x":11.5, "y":1}, + {"label":"}", "x":12.5, "y":1}, + {"label":"Backspace", "x":13.5, "y":1, "w":1.5}, + + {"label":"Control", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":":", "x":10.75, "y":2}, + {"label":"\"", "x":11.75, "y":2}, + {"label":"Enter", "x":12.75, "y":2, "w":2.25}, + + {"label":"Shift", "x":0, "y":3, "w":2.25}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":"<", "x":9.25, "y":3}, + {"label":">", "x":10.25, "y":3}, + {"label":"?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"Fn", "x":14, "y":3}, + + {"label":"Caps Lock", "x":0, "y":4, "w":1.5}, + {"label":"Win", "x":1.5, "y":4}, + {"label":"Alt", "x":2.5, "y":4, "w":1.5}, + {"x":4, "y":4, "w":7}, + {"label":"Alt", "x":11, "y":4, "w":1.5}, + {"label":"Win", "x":12.5, "y":4}, + {"label":"Fn", "x":13.5, "y":4, "w":1.5} ] }, - "LAYOUT_allleds": { + "LAYOUT_60_ansi_split_bs_rshift": { "layout": [ - { - "label": "Esc", - "x": 0, - "y": 0 - }, - { - "label": "!", - "x": 1, - "y": 0 - }, - { - "label": "@", - "x": 2, - "y": 0 - }, - { - "label": "#", - "x": 3, - "y": 0 - }, - { - "label": "$", - "x": 4, - "y": 0 - }, - { - "label": "%", - "x": 5, - "y": 0 - }, - { - "label": "^", - "x": 6, - "y": 0 - }, - { - "label": "&", - "x": 7, - "y": 0 - }, - { - "label": "*", - "x": 8, - "y": 0 - }, - { - "label": "(", - "x": 9, - "y": 0 - }, - { - "label": ")", - "x": 10, - "y": 0 - }, - { - "label": "_", - "x": 11, - "y": 0 - }, - { - "label": "+", - "x": 12, - "y": 0 - }, - { - "label": "|", - "x": 13, - "y": 0 - }, - { - "label": "~", - "x": 14, - "y": 0 - }, - { - "label": "Tab", - "x": 0, - "y": 1, - "w": 1.5 - }, - { - "label": "Q", - "x": 1.5, - "y": 1 - }, - { - "label": "W", - "x": 2.5, - "y": 1 - }, - { - "label": "E", - "x": 3.5, - "y": 1 - }, - { - "label": "R", - "x": 4.5, - "y": 1 - }, - { - "label": "T", - "x": 5.5, - "y": 1 - }, - { - "label": "Y", - "x": 6.5, - "y": 1 - }, - { - "label": "U", - "x": 7.5, - "y": 1 - }, - { - "label": "I", - "x": 8.5, - "y": 1 - }, - { - "label": "O", - "x": 9.5, - "y": 1 - }, - { - "label": "P", - "x": 10.5, - "y": 1 - }, - { - "label": "{", - "x": 11.5, - "y": 1 - }, - { - "label": "}", - "x": 12.5, - "y": 1 - }, - { - "label": "Backspace", - "x": 13.5, - "y": 1, - "w": 1.5 - }, - { - "label": "Control", - "x": 0, - "y": 2, - "w": 1.75 - }, - { - "label": "A", - "x": 1.75, - "y": 2 - }, - { - "label": "S", - "x": 2.75, - "y": 2 - }, - { - "label": "D", - "x": 3.75, - "y": 2 - }, - { - "label": "F", - "x": 4.75, - "y": 2 - }, - { - "label": "G", - "x": 5.75, - "y": 2 - }, - { - "label": "H", - "x": 6.75, - "y": 2 - }, - { - "label": "J", - "x": 7.75, - "y": 2 - }, - { - "label": "K", - "x": 8.75, - "y": 2 - }, - { - "label": "L", - "x": 9.75, - "y": 2 - }, - { - "label": ":", - "x": 10.75, - "y": 2 - }, - { - "label": "\"", - "x": 11.75, - "y": 2 - }, - { - "label": "Enter", - "x": 12.75, - "y": 2, - "w": 2.25 - }, - { - "label": "Shift", - "x": 0, - "y": 3, - "w": 2.25 - }, - { - "label": "Z", - "x": 2.25, - "y": 3 - }, - { - "label": "X", - "x": 3.25, - "y": 3 - }, - { - "label": "C", - "x": 4.25, - "y": 3 - }, - { - "label": "V", - "x": 5.25, - "y": 3 - }, - { - "label": "B", - "x": 6.25, - "y": 3 - }, - { - "label": "N", - "x": 7.25, - "y": 3 - }, - { - "label": "M", - "x": 8.25, - "y": 3 - }, - { - "label": "<", - "x": 9.25, - "y": 3 - }, - { - "label": ">", - "x": 10.25, - "y": 3 - }, - { - "label": "?", - "x": 11.25, - "y": 3 - }, - { - "label": "Shift", - "x": 12.25, - "y": 3, - "w": 1.75 - }, - { - "label": "Fn", - "x": 14, - "y": 3 - }, - { - "label": "Caps Lock", - "x": 0, - "y": 4, - "w": 1.5 - }, - { - "label": "Win", - "x": 1.5, - "y": 4 - }, - { - "label": "Alt", - "x": 2.5, - "y": 4, - "w": 1.5 - }, - { - "x": 4, - "y": 4, - "w": 7 - }, - { - "label": "Alt", - "x": 11, - "y": 4, - "w": 1.5 - }, - { - "label": "Win", - "x": 12.5, - "y": 4 - }, - { - "label": "Fn", - "x": 13.5, - "y": 4, - "w": 1.5 - } + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0}, + {"x":14, "y":0}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3}, + {"x":12.25, "y":3, "w":1.75}, + {"x":14, "y":3}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":6.25}, + {"x":10, "y":4, "w":1.25}, + {"x":11.25, "y":4, "w":1.25}, + {"x":12.5, "y":4, "w":1.25}, + {"x":13.75, "y":4, "w":1.25} ] } } diff --git a/keyboards/exclusive/e6_rgb/keymaps/60_ansi/keymap.c b/keyboards/exclusive/e6_rgb/keymaps/60_ansi/keymap.c deleted file mode 100644 index 0f7f09f551..0000000000 --- a/keyboards/exclusive/e6_rgb/keymaps/60_ansi/keymap.c +++ /dev/null @@ -1,29 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Layer 0: Default Layer - * ,-----------------------------------------------------------. - * |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| BSp | - * |-----------------------------------------------------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| - * |-----------------------------------------------------------| - * |Contro| A| S| D| F| G| H| J| K| L| ;| '|Enter | - * |-----------------------------------------------------------| - * |Shift | Z| X| C| V| B| N| M| ,| .| /|Shift |Fn0| - * |-----------------------------------------------------------' - * |Ctrl |Gui|Alt | Space |Alt |Gui|Fn |Ctrl | - * `-----------------------------------------------------------' - */ - [0] = LAYOUT_60_ansi( - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSPC,\ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSLS,\ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT,\ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT,\ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL), - [1] = LAYOUT_60_ansi( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,_______,\ - RESET, RGB_TOG,RGB_MOD,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,\ - _______, _______,_______,_______,_______,_______,KC_LEFT,KC_DOWN,KC_UP,KC_RIGHT,_______,_______,_______,\ - _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,\ - _______,_______,_______, _______, _______,_______,_______,_______), -}; diff --git a/keyboards/exclusive/e6_rgb/keymaps/60_ansi_split_bs_rshift/keymap.c b/keyboards/exclusive/e6_rgb/keymaps/60_ansi_split_bs_rshift/keymap.c new file mode 100644 index 0000000000..0678b7d145 --- /dev/null +++ b/keyboards/exclusive/e6_rgb/keymaps/60_ansi_split_bs_rshift/keymap.c @@ -0,0 +1,18 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_60_ansi_split_bs_rshift( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_END, + KC_CAPS, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL + ), + [1] = LAYOUT_60_ansi_split_bs_rshift( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_PSCR, + RESET, RGB_TOG, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGUP, KC_PGDN, _______, + _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/exclusive/e6_rgb/keymaps/60_ansi_split_bs_shift/keymap.c b/keyboards/exclusive/e6_rgb/keymaps/60_ansi_split_bs_shift/keymap.c deleted file mode 100644 index 1ecde0089c..0000000000 --- a/keyboards/exclusive/e6_rgb/keymaps/60_ansi_split_bs_shift/keymap.c +++ /dev/null @@ -1,16 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_60_ansi_split_bs_shift( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSLS, KC_GRV,\ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSPC,\ - KC_LCTRL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT,\ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_END,\ - KC_CAPS, KC_LGUI, KC_LALT, LT(1,KC_SPC), KC_RALT, KC_RGUI, TG(1), KC_RCTL), - [1] = LAYOUT_60_ansi_split_bs_shift( - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,_______,KC_PSCR,\ - RESET, RGB_TOG,RGB_MOD,_______,_______,_______,_______,_______,_______,_______,_______,KC_PGUP,KC_PGDN,_______,\ - _______, _______,_______,_______,_______,_______,KC_LEFT,KC_DOWN,KC_UP,KC_RIGHT,_______,_______,_______,\ - _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,\ - _______,_______,_______, _______, _______,_______,TG(0),_______), -}; diff --git a/keyboards/exclusive/e6_rgb/keymaps/60_hhkb/keymap.c b/keyboards/exclusive/e6_rgb/keymaps/60_hhkb/keymap.c index e1d2cca372..a1d8e5c784 100644 --- a/keyboards/exclusive/e6_rgb/keymaps/60_hhkb/keymap.c +++ b/keyboards/exclusive/e6_rgb/keymaps/60_hhkb/keymap.c @@ -1,16 +1,18 @@ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_60_hhkb( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSLS, KC_GRV,\ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSPC,\ - KC_LCTRL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT,\ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_BSLS,\ - KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1)), + [0] = LAYOUT_60_hhkb( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_BSLS, + KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1) + ), [1] = LAYOUT_60_hhkb( - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,_______,_______,\ - RESET, RGB_TOG,RGB_MOD,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,\ - _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,\ - _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,\ - _______,_______, _______, _______,_______), + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, + RESET, RGB_TOG, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______ + ) }; diff --git a/keyboards/exclusive/e6_rgb/keymaps/60_tsangan_hhkb/keymap.c b/keyboards/exclusive/e6_rgb/keymaps/60_tsangan_hhkb/keymap.c new file mode 100644 index 0000000000..5483ebb835 --- /dev/null +++ b/keyboards/exclusive/e6_rgb/keymaps/60_tsangan_hhkb/keymap.c @@ -0,0 +1,18 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_60_tsangan_hhkb( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_END, + KC_CAPS, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL + ), + [1] = LAYOUT_60_tsangan_hhkb( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_PSCR, + RESET, RGB_TOG, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGUP, KC_PGDN, _______, + _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______ + ), +}; diff --git a/keyboards/exclusive/e6_rgb/keymaps/60_wkl/keymap.c b/keyboards/exclusive/e6_rgb/keymaps/60_wkl/keymap.c deleted file mode 100644 index e149c7f06b..0000000000 --- a/keyboards/exclusive/e6_rgb/keymaps/60_wkl/keymap.c +++ /dev/null @@ -1,16 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_60_wkl( - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS,\ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC,KC_BSPC,\ - KC_LCTRL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT,\ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_RSFT, KC_DEL,\ - KC_CAPS, KC_LGUI, KC_LALT, LT(1,KC_SPC), KC_RALT, TG(1), KC_RCTL), - [1] = LAYOUT_60_wkl( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,KC_DEL,\ - RESET, RGB_TOG, RGB_MOD,_______,_______,_______,_______,_______,_______,_______,_______,KC_PGUP,KC_PGDN,_______,\ - _______, _______,_______,_______,_______,_______,KC_LEFT,KC_DOWN,KC_UP,KC_RIGHT,_______,_______,_______,\ - _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,\ - _______,_______,_______, _______, _______,TG(0),_______), -}; diff --git a/keyboards/exclusive/e6_rgb/keymaps/60_wkl_split_bs/keymap.c b/keyboards/exclusive/e6_rgb/keymaps/60_wkl_split_bs/keymap.c deleted file mode 100644 index d9a7885eb8..0000000000 --- a/keyboards/exclusive/e6_rgb/keymaps/60_wkl_split_bs/keymap.c +++ /dev/null @@ -1,16 +0,0 @@ -#include QMK_KEYBOARD_H - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_60_wkl_split_bs( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSLS, KC_GRV,\ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSPC,\ - KC_LCTRL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT,\ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_END,\ - KC_CAPS, KC_LGUI, KC_LALT, LT(1,KC_SPC), KC_RALT, TG(1), KC_RCTL), - [1] = LAYOUT_60_wkl_split_bs( - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,_______,KC_PSCR,\ - RESET, RGB_TOG,RGB_MOD,_______,_______,_______,_______,_______,_______,_______,_______,KC_PGUP,KC_PGDN,_______,\ - _______, _______,_______,_______,_______,_______,KC_LEFT,KC_DOWN,KC_UP,KC_RIGHT,_______,_______,_______,\ - _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,\ - _______,_______,_______, _______, _______,TG(0),_______), -}; diff --git a/keyboards/exclusive/e6_rgb/keymaps/allleds/keymap.c b/keyboards/exclusive/e6_rgb/keymaps/allleds/keymap.c index d9a7885eb8..b0b06766bf 100644 --- a/keyboards/exclusive/e6_rgb/keymaps/allleds/keymap.c +++ b/keyboards/exclusive/e6_rgb/keymaps/allleds/keymap.c @@ -1,16 +1,18 @@ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_60_wkl_split_bs( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSLS, KC_GRV,\ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSPC,\ - KC_LCTRL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT,\ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_END,\ - KC_CAPS, KC_LGUI, KC_LALT, LT(1,KC_SPC), KC_RALT, TG(1), KC_RCTL), - [1] = LAYOUT_60_wkl_split_bs( - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,_______,KC_PSCR,\ - RESET, RGB_TOG,RGB_MOD,_______,_______,_______,_______,_______,_______,_______,_______,KC_PGUP,KC_PGDN,_______,\ - _______, _______,_______,_______,_______,_______,KC_LEFT,KC_DOWN,KC_UP,KC_RIGHT,_______,_______,_______,\ - _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,\ - _______,_______,_______, _______, _______,TG(0),_______), + [0] = LAYOUT_60_tsangan_hhkb( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_END, + KC_CAPS, KC_LGUI, KC_LALT, LT(1,KC_SPC), KC_RALT, TG(1), KC_RCTL + ), + [1] = LAYOUT_60_tsangan_hhkb( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_PSCR, + RESET, RGB_TOG, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGUP, KC_PGDN, _______, + _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, TG(0), _______ + ), }; diff --git a/keyboards/exclusive/e6_rgb/keymaps/default/keymap.c b/keyboards/exclusive/e6_rgb/keymaps/default/keymap.c index 0f7f09f551..f19c72c8af 100644 --- a/keyboards/exclusive/e6_rgb/keymaps/default/keymap.c +++ b/keyboards/exclusive/e6_rgb/keymaps/default/keymap.c @@ -15,15 +15,17 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------' */ [0] = LAYOUT_60_ansi( - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSPC,\ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSLS,\ - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT,\ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT,\ - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL), + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL + ), [1] = LAYOUT_60_ansi( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,_______,\ - RESET, RGB_TOG,RGB_MOD,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,\ - _______, _______,_______,_______,_______,_______,KC_LEFT,KC_DOWN,KC_UP,KC_RIGHT,_______,_______,_______,\ - _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,\ - _______,_______,_______, _______, _______,_______,_______,_______), + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, + RESET, RGB_TOG, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______ + ), }; diff --git a/keyboards/exclusive/e6_rgb/keymaps/via/keymap.c b/keyboards/exclusive/e6_rgb/keymaps/via/keymap.c index 39d7a74c4c..a441c44557 100644 --- a/keyboards/exclusive/e6_rgb/keymaps/via/keymap.c +++ b/keyboards/exclusive/e6_rgb/keymaps/via/keymap.c @@ -1,28 +1,32 @@ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_60_wkl_split_bs( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSLS, KC_GRV,\ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSPC,\ - KC_LCTRL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT,\ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_END,\ - KC_CAPS, KC_LGUI, KC_LALT, LT(1,KC_SPC), KC_RALT, TG(1), KC_RCTL), - [1] = LAYOUT_60_wkl_split_bs( - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,_______,KC_PSCR,\ - RESET, RGB_TOG,RGB_MOD,_______,_______,_______,_______,_______,_______,_______,_______,KC_PGUP,KC_PGDN,_______,\ - _______, _______,_______,_______,_______,_______,KC_LEFT,KC_DOWN, KC_UP,KC_RIGHT,_______,_______,_______,\ - _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,\ - _______,_______,_______, _______, _______, TG(0),_______), - [2] = LAYOUT_60_wkl_split_bs( - _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,\ - _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,\ - _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,\ - _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,\ - _______,_______,_______, _______, _______,_______,_______), - [3] = LAYOUT_60_wkl_split_bs( - _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,\ - _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,\ - _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,\ - _______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,\ - _______,_______,_______, _______, _______,_______,_______), + [0] = LAYOUT_60_ansi_split_bs_rshift( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_END, + KC_CAPS, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL + ), + [1] = LAYOUT_60_ansi_split_bs_rshift( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_PSCR, + RESET, RGB_TOG, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGUP, KC_PGDN, _______, + _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______ + ), + [2] = LAYOUT_60_ansi_split_bs_rshift( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______ + ), + [3] = LAYOUT_60_ansi_split_bs_rshift( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______ + ) }; diff --git a/keyboards/exclusive/e6_rgb/readme.md b/keyboards/exclusive/e6_rgb/readme.md index b252ab53b4..d6e2b44e7e 100644 --- a/keyboards/exclusive/e6_rgb/readme.md +++ b/keyboards/exclusive/e6_rgb/readme.md @@ -7,6 +7,10 @@ Hardware Supported: E6V1, E6V2 Make example for this keyboard (after setting up your build environment): - make exclusive/e6_rgb:60_ansi + make exclusive/e6_rgb:default + +Flashing example for this keyboard: + + make exclusive/e6_rgb:default:flash See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/exclusive/e6_rgb/rules.mk b/keyboards/exclusive/e6_rgb/rules.mk index 1e0bfd0b07..e895602722 100644 --- a/keyboards/exclusive/e6_rgb/rules.mk +++ b/keyboards/exclusive/e6_rgb/rules.mk @@ -15,11 +15,11 @@ COMMAND_ENABLE = no # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = yes # USB Nkey Rollover +NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -RGBLIGHT_ENABLE = yes # Use RGB underglow light RGB_MATRIX_ENABLE = no # Use RGB matrix RGB_MATRIX_DRIVER = IS31FL3733 -LAYOUTS = 60_ansi 60_hhkb + +LAYOUTS = 60_ansi 60_hhkb 60_tsangan_hhkb 60_ansi_split_bs_rshift From 14f0a417c7de9f71cf83723f4bb5852cdac03ab7 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Sun, 26 Sep 2021 05:48:14 +0000 Subject: [PATCH 129/595] GG Keyboards Genesis: Layout Macro update and clean-up (#14606) * Genesis Hotswap: rename LAYOUT to LAYOUT_tkl_ansi * Genesis Hotswap: delete blank layers from default keymap Results in a smaller compiled firmware size. * Genesis Hotswap: tidy-up via keymap Fixes the visual alignment of keycodes. * Genesis Hotswap: specify Hotswap in info.json * Genesis Hotswap: enable Community Layout support * Genesis Hotswap: remove KBFirmware Parser references * Genesis Hotswap: specify Hotswap in config.h * Genesis Solder: correct keyboard layout * Genesis Solder: rename LAYOUT to LAYOUT_all I don't actually know with certainty that this *is* LAYOUT_all, but in the absence of more concrete information, I'm going with this. * Genesis Solder: delete blank layers from default keymap Results in a smaller compiled firmware size. * Genesis Solder: tidy-up via keymap Fixes the visual alignment of keycodes. * Genesis Solder: specify Hotswap in info.json * Genesis Solder: add LAYOUT_tkl_ansi * Genesis Solder: enable Community Layout support * Genesis Solder: remove KBFirmware Parser references * Genesis Solder: specify Solder in config.h --- .../ggkeyboards/genesis/hotswap/config.h | 5 +- .../ggkeyboards/genesis/hotswap/hotswap.c | 5 - .../ggkeyboards/genesis/hotswap/hotswap.h | 5 +- .../ggkeyboards/genesis/hotswap/info.json | 13 +- .../genesis/hotswap/keymaps/default/keymap.c | 23 +- .../genesis/hotswap/keymaps/via/keymap.c | 15 +- .../ggkeyboards/genesis/hotswap/rules.mk | 3 +- keyboards/ggkeyboards/genesis/solder/config.h | 6 +- .../ggkeyboards/genesis/solder/info.json | 261 ++++++++++++------ .../genesis/solder/keymaps/default/keymap.c | 22 +- .../genesis/solder/keymaps/via/keymap.c | 16 +- keyboards/ggkeyboards/genesis/solder/rules.mk | 3 +- keyboards/ggkeyboards/genesis/solder/solder.c | 5 - keyboards/ggkeyboards/genesis/solder/solder.h | 19 +- 14 files changed, 234 insertions(+), 167 deletions(-) diff --git a/keyboards/ggkeyboards/genesis/hotswap/config.h b/keyboards/ggkeyboards/genesis/hotswap/config.h index 966acc1b49..52f6fc8524 100644 --- a/keyboards/ggkeyboards/genesis/hotswap/config.h +++ b/keyboards/ggkeyboards/genesis/hotswap/config.h @@ -23,7 +23,7 @@ #define PRODUCT_ID 0xD4D3 #define DEVICE_VER 0x0001 #define MANUFACTURER GG Keyboards -#define PRODUCT Genesis +#define PRODUCT Genesis Hotswap /* key matrix size */ #define MATRIX_ROWS 6 @@ -45,6 +45,3 @@ { F0, F1, F2, F3, F4, F5, F6, F7, A0, A1, A2, A3, A4, A5, A6, A7, C6, C7 } #define DIODE_DIRECTION COL2ROW - -// generated by KBFirmware JSON to QMK Parser -// https://noroadsleft.github.io/kbf_qmk_converter/ diff --git a/keyboards/ggkeyboards/genesis/hotswap/hotswap.c b/keyboards/ggkeyboards/genesis/hotswap/hotswap.c index b3b7c6508c..e27d117d9a 100644 --- a/keyboards/ggkeyboards/genesis/hotswap/hotswap.c +++ b/keyboards/ggkeyboards/genesis/hotswap/hotswap.c @@ -1,4 +1,3 @@ - /* Copyright 2021 Steven Phillips (Spooknik) * * This program is free software: you can redistribute it and/or modify @@ -16,7 +15,3 @@ */ #include "hotswap.h" - -// generated by KBFirmware JSON to QMK Parser -// https://noroadsleft.github.io/kbf_qmk_converter/ - diff --git a/keyboards/ggkeyboards/genesis/hotswap/hotswap.h b/keyboards/ggkeyboards/genesis/hotswap/hotswap.h index 4469037efe..51dc2e91a1 100644 --- a/keyboards/ggkeyboards/genesis/hotswap/hotswap.h +++ b/keyboards/ggkeyboards/genesis/hotswap/hotswap.h @@ -19,7 +19,7 @@ #include "quantum.h" // clang-format off -#define LAYOUT( \ +#define LAYOUT_tkl_ansi( \ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0F, K0G, K0H, \ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2F, K2G, K2H, \ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3F, K3G, K3H, \ @@ -34,6 +34,3 @@ { KC_NO, K51, K52, K53, K54, K55, K56, K57, K58, K59, K5A, K5B, K5C, KC_NO, KC_NO, KC_NO, K5G, KC_NO }, \ { K60, K61, KC_NO, K63, KC_NO, KC_NO, K66, KC_NO, KC_NO, KC_NO, K6A, K6B, K6C, K6D, KC_NO, K6F, K6G, K6H } \ } - -// generated by KBFirmware JSON to QMK Parser -// https://noroadsleft.github.io/kbf_qmk_converter/ diff --git a/keyboards/ggkeyboards/genesis/hotswap/info.json b/keyboards/ggkeyboards/genesis/hotswap/info.json index 566ed71cfc..8843b6a4bc 100644 --- a/keyboards/ggkeyboards/genesis/hotswap/info.json +++ b/keyboards/ggkeyboards/genesis/hotswap/info.json @@ -1,9 +1,12 @@ { - "keyboard_name": "Genesis", + "keyboard_name": "Genesis Hotswap", "url": "", "maintainer": "Spooknik", + "layout_aliases": { + "LAYOUT": "LAYOUT_tkl_ansi" + }, "layouts": { - "LAYOUT": { + "LAYOUT_tkl_ansi": { "layout": [ {"label":"K00 (C5,F0)", "x":0, "y":0}, {"label":"K01 (C5,F1)", "x":2, "y":0}, @@ -21,6 +24,7 @@ {"label":"K0F (C5,A7)", "x":15.25, "y":0}, {"label":"K0G (C5,C6)", "x":16.25, "y":0}, {"label":"K0H (C5,C7)", "x":17.25, "y":0}, + {"label":"K20 (C4,F0)", "x":0, "y":1.5}, {"label":"K21 (C4,F1)", "x":1, "y":1.5}, {"label":"K22 (C4,F2)", "x":2, "y":1.5}, @@ -38,6 +42,7 @@ {"label":"K2F (C4,A7)", "x":15.25, "y":1.5}, {"label":"K2G (C4,C6)", "x":16.25, "y":1.5}, {"label":"K2H (C4,C7)", "x":17.25, "y":1.5}, + {"label":"K30 (C3,F0)", "x":0, "y":2.5, "w":1.5}, {"label":"K31 (C3,F1)", "x":1.5, "y":2.5}, {"label":"K32 (C3,F2)", "x":2.5, "y":2.5}, @@ -55,6 +60,7 @@ {"label":"K3F (C3,A7)", "x":15.25, "y":2.5}, {"label":"K3G (C3,C6)", "x":16.25, "y":2.5}, {"label":"K3H (C3,C7)", "x":17.25, "y":2.5}, + {"label":"K40 (C2,F0)", "x":0, "y":3.5, "w":1.75}, {"label":"K42 (C2,F2)", "x":1.75, "y":3.5}, {"label":"K43 (C2,F3)", "x":2.75, "y":3.5}, @@ -68,6 +74,7 @@ {"label":"K4B (C2,A3)", "x":10.75, "y":3.5}, {"label":"K4C (C2,A4)", "x":11.75, "y":3.5}, {"label":"K4D (C2,A5)", "x":12.75, "y":3.5, "w":2.25}, + {"label":"K51 (C1,F1)", "x":0, "y":4.5, "w":2.25}, {"label":"K52 (C1,F2)", "x":2.25, "y":4.5}, {"label":"K53 (C1,F3)", "x":3.25, "y":4.5}, @@ -81,6 +88,7 @@ {"label":"K5B (C1,A3)", "x":11.25, "y":4.5}, {"label":"K5C (C1,A4)", "x":12.25, "y":4.5, "w":2.75}, {"label":"K5G (C1,C6)", "x":16.25, "y":4.5}, + {"label":"K60 (C0,F0)", "x":0, "y":5.5, "w":1.25}, {"label":"K61 (C0,F1)", "x":1.25, "y":5.5, "w":1.25}, {"label":"K63 (C0,F3)", "x":2.5, "y":5.5, "w":1.25}, @@ -95,5 +103,4 @@ ] } } - ,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/" } diff --git a/keyboards/ggkeyboards/genesis/hotswap/keymaps/default/keymap.c b/keyboards/ggkeyboards/genesis/hotswap/keymaps/default/keymap.c index ab009ae58a..afe94141ec 100644 --- a/keyboards/ggkeyboards/genesis/hotswap/keymaps/default/keymap.c +++ b/keyboards/ggkeyboards/genesis/hotswap/keymaps/default/keymap.c @@ -13,11 +13,11 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ - + #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( + [0] = LAYOUT_tkl_ansi( KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, @@ -25,7 +25,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, KC_LGUI, MO(1), KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT ), - [1] = LAYOUT( + [1] = LAYOUT_tkl_ansi( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, @@ -33,21 +33,4 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), - [2] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ), - [3] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ), - }; diff --git a/keyboards/ggkeyboards/genesis/hotswap/keymaps/via/keymap.c b/keyboards/ggkeyboards/genesis/hotswap/keymaps/via/keymap.c index dd680a8391..5647447a80 100644 --- a/keyboards/ggkeyboards/genesis/hotswap/keymaps/via/keymap.c +++ b/keyboards/ggkeyboards/genesis/hotswap/keymaps/via/keymap.c @@ -14,11 +14,10 @@ * along with this program. If not, see . */ - #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( + [0] = LAYOUT_tkl_ansi( KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, @@ -26,7 +25,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, KC_LGUI, MO(1), KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT ), - [1] = LAYOUT( + [1] = LAYOUT_tkl_ansi( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, @@ -34,20 +33,20 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), - [2] = LAYOUT( + [2] = LAYOUT_tkl_ansi( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), - [3] = LAYOUT( + [3] = LAYOUT_tkl_ansi( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), -}; \ No newline at end of file +}; diff --git a/keyboards/ggkeyboards/genesis/hotswap/rules.mk b/keyboards/ggkeyboards/genesis/hotswap/rules.mk index 3dcae2d781..c5db939979 100644 --- a/keyboards/ggkeyboards/genesis/hotswap/rules.mk +++ b/keyboards/ggkeyboards/genesis/hotswap/rules.mk @@ -20,5 +20,4 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# generated by KBFirmware JSON to QMK Parser -# https://noroadsleft.github.io/kbf_qmk_converter/ +LAYOUTS = tkl_ansi diff --git a/keyboards/ggkeyboards/genesis/solder/config.h b/keyboards/ggkeyboards/genesis/solder/config.h index 74a098f41a..6bfeaf9a54 100644 --- a/keyboards/ggkeyboards/genesis/solder/config.h +++ b/keyboards/ggkeyboards/genesis/solder/config.h @@ -23,7 +23,7 @@ #define PRODUCT_ID 0xD4D2 #define DEVICE_VER 0x0001 #define MANUFACTURER GG Keyboards -#define PRODUCT Genesis +#define PRODUCT Genesis Solder /* key matrix size */ #define MATRIX_ROWS 6 @@ -43,7 +43,3 @@ #define MATRIX_COL_PINS { F0, F1, F2, F3, F4, F5, F6, F7, A0, A1, A2, A3, A4, A5, A6, A7, C6, C7 } #define DIODE_DIRECTION COL2ROW - - -// generated by KBFirmware JSON to QMK Parser -// https://noroadsleft.github.io/kbf_qmk_converter/ diff --git a/keyboards/ggkeyboards/genesis/solder/info.json b/keyboards/ggkeyboards/genesis/solder/info.json index 11db10c4cc..a316ad019d 100644 --- a/keyboards/ggkeyboards/genesis/solder/info.json +++ b/keyboards/ggkeyboards/genesis/solder/info.json @@ -1,9 +1,12 @@ { - "keyboard_name": "Genesis", + "keyboard_name": "Genesis Solder", "url": "", "maintainer": "Spooknik", + "layout_aliases": { + "LAYOUT": "LAYOUT_all" + }, "layouts": { - "LAYOUT": { + "LAYOUT_all": { "layout": [ {"label":"K00 (C5,F0)", "x":0, "y":0}, {"label":"K01 (C5,F1)", "x":2, "y":0}, @@ -18,84 +21,184 @@ {"label":"K0A (C5,A2)", "x":12, "y":0}, {"label":"K0B (C5,A3)", "x":13, "y":0}, {"label":"K0C (C5,A4)", "x":14, "y":0}, - {"label":"K0E (C5,A6)", "x":15, "y":0}, - {"label":"K0F (C5,A7)", "x":16, "y":0}, - {"label":"K0G (C5,C6)", "x":17, "y":0}, - {"label":"K10 (C4,F0)", "x":0, "y":1}, - {"label":"K11 (C4,F1)", "x":1, "y":1}, - {"label":"K12 (C4,F2)", "x":2, "y":1}, - {"label":"K13 (C4,F3)", "x":3, "y":1}, - {"label":"K14 (C4,F4)", "x":4, "y":1}, - {"label":"K15 (C4,F5)", "x":5, "y":1}, - {"label":"K16 (C4,F6)", "x":6, "y":1}, - {"label":"K17 (C4,F7)", "x":7, "y":1}, - {"label":"K18 (C4,A0)", "x":8, "y":1}, - {"label":"K19 (C4,A1)", "x":9, "y":1}, - {"label":"K1A (C4,A2)", "x":10, "y":1}, - {"label":"K1B (C4,A3)", "x":11, "y":1}, - {"label":"K1C (C4,A4)", "x":12, "y":1}, - {"label":"K1D (C4,A5)", "x":13, "y":1}, - {"label":"K0D (C5,A5)", "x":14, "y":1}, - {"label":"K1E (C4,A6)", "x":15, "y":1}, - {"label":"K1F (C4,A7)", "x":16, "y":1}, - {"label":"K1G (C4,C6)", "x":17, "y":1}, - {"label":"K20 (C3,F0)", "x":0, "y":2, "w":1.5}, - {"label":"K21 (C3,F1)", "x":1.5, "y":2}, - {"label":"K22 (C3,F2)", "x":2.5, "y":2}, - {"label":"K23 (C3,F3)", "x":3.5, "y":2}, - {"label":"K24 (C3,F4)", "x":4.5, "y":2}, - {"label":"K25 (C3,F5)", "x":5.5, "y":2}, - {"label":"K26 (C3,F6)", "x":6.5, "y":2}, - {"label":"K27 (C3,F7)", "x":7.5, "y":2}, - {"label":"K28 (C3,A0)", "x":8.5, "y":2}, - {"label":"K29 (C3,A1)", "x":9.5, "y":2}, - {"label":"K2A (C3,A2)", "x":10.5, "y":2}, - {"label":"K2B (C3,A3)", "x":11.5, "y":2}, - {"label":"K2C (C3,A4)", "x":12.5, "y":2}, - {"label":"K2D (C3,A5)", "x":13.5, "y":2, "w":1.5}, - {"label":"K2E (C3,A6)", "x":15, "y":2}, - {"label":"K2F (C3,A7)", "x":16, "y":2}, - {"label":"K2G (C3,C6)", "x":17, "y":2}, - {"label":"K30 (C2,F0)", "x":0, "y":3, "w":1.75}, - {"label":"K31 (C2,F1)", "x":1.75, "y":3}, - {"label":"K32 (C2,F2)", "x":2.75, "y":3}, - {"label":"K33 (C2,F3)", "x":3.75, "y":3}, - {"label":"K34 (C2,F4)", "x":4.75, "y":3}, - {"label":"K35 (C2,F5)", "x":5.75, "y":3}, - {"label":"K36 (C2,F6)", "x":6.75, "y":3}, - {"label":"K37 (C2,F7)", "x":7.75, "y":3}, - {"label":"K38 (C2,A0)", "x":8.75, "y":3}, - {"label":"K39 (C2,A1)", "x":9.75, "y":3}, - {"label":"K3A (C2,A2)", "x":10.75, "y":3}, - {"label":"K3B (C2,A3)", "x":11.75, "y":3}, - {"label":"K3D (C2,A5)", "x":12.75, "y":3, "w":2.25}, - {"label":"K40 (C1,F0)", "x":0, "y":4, "w":1.25}, - {"label":"K41 (C1,F1)", "x":1.25, "y":4}, - {"label":"K42 (C1,F2)", "x":2.25, "y":4}, - {"label":"K43 (C1,F3)", "x":3.25, "y":4}, - {"label":"K44 (C1,F4)", "x":4.25, "y":4}, - {"label":"K45 (C1,F5)", "x":5.25, "y":4}, - {"label":"K46 (C1,F6)", "x":6.25, "y":4}, - {"label":"K47 (C1,F7)", "x":7.25, "y":4}, - {"label":"K48 (C1,A0)", "x":8.25, "y":4}, - {"label":"K49 (C1,A1)", "x":9.25, "y":4}, - {"label":"K4A (C1,A2)", "x":10.25, "y":4}, - {"label":"K4B (C1,A3)", "x":11.25, "y":4}, - {"label":"K4C (C1,A4)", "x":12.25, "y":4, "w":2.75}, - {"label":"K4F (C1,A7)", "x":16, "y":4}, - {"label":"K50 (C0,F0)", "x":0, "y":5, "w":1.25}, - {"label":"K51 (C0,F1)", "x":1.25, "y":5, "w":1.25}, - {"label":"K52 (C0,F2)", "x":2.5, "y":5, "w":1.25}, - {"label":"K56 (C0,F6)", "x":3.75, "y":5, "w":6.25}, - {"label":"K5A (C0,A2)", "x":10, "y":5, "w":1.25}, - {"label":"K5B (C0,A3)", "x":11.25, "y":5, "w":1.25}, - {"label":"K5C (C0,A4)", "x":12.5, "y":5, "w":1.25}, - {"label":"K5D (C0,A5)", "x":13.75, "y":5, "w":1.25}, - {"label":"K5E (C0,A6)", "x":15, "y":5}, - {"label":"K5F (C0,A7)", "x":16, "y":5}, - {"label":"K5G (C0,C6)", "x":17, "y":5} + {"label":"K0E (C5,A6)", "x":15.25, "y":0}, + {"label":"K0F (C5,A7)", "x":16.25, "y":0}, + {"label":"K0G (C5,C6)", "x":17.25, "y":0}, + + {"label":"K10 (C4,F0)", "x":0, "y":1.5}, + {"label":"K11 (C4,F1)", "x":1, "y":1.5}, + {"label":"K12 (C4,F2)", "x":2, "y":1.5}, + {"label":"K13 (C4,F3)", "x":3, "y":1.5}, + {"label":"K14 (C4,F4)", "x":4, "y":1.5}, + {"label":"K15 (C4,F5)", "x":5, "y":1.5}, + {"label":"K16 (C4,F6)", "x":6, "y":1.5}, + {"label":"K17 (C4,F7)", "x":7, "y":1.5}, + {"label":"K18 (C4,A0)", "x":8, "y":1.5}, + {"label":"K19 (C4,A1)", "x":9, "y":1.5}, + {"label":"K1A (C4,A2)", "x":10, "y":1.5}, + {"label":"K1B (C4,A3)", "x":11, "y":1.5}, + {"label":"K1C (C4,A4)", "x":12, "y":1.5}, + {"label":"K1D (C4,A5)", "x":13, "y":1.5}, + {"label":"K0D (C5,A5)", "x":14, "y":1.5}, + {"label":"K1E (C4,A6)", "x":15.25, "y":1.5}, + {"label":"K1F (C4,A7)", "x":16.25, "y":1.5}, + {"label":"K1G (C4,C6)", "x":17.25, "y":1.5}, + + {"label":"K20 (C3,F0)", "x":0, "y":2.5, "w":1.5}, + {"label":"K21 (C3,F1)", "x":1.5, "y":2.5}, + {"label":"K22 (C3,F2)", "x":2.5, "y":2.5}, + {"label":"K23 (C3,F3)", "x":3.5, "y":2.5}, + {"label":"K24 (C3,F4)", "x":4.5, "y":2.5}, + {"label":"K25 (C3,F5)", "x":5.5, "y":2.5}, + {"label":"K26 (C3,F6)", "x":6.5, "y":2.5}, + {"label":"K27 (C3,F7)", "x":7.5, "y":2.5}, + {"label":"K28 (C3,A0)", "x":8.5, "y":2.5}, + {"label":"K29 (C3,A1)", "x":9.5, "y":2.5}, + {"label":"K2A (C3,A2)", "x":10.5, "y":2.5}, + {"label":"K2B (C3,A3)", "x":11.5, "y":2.5}, + {"label":"K2C (C3,A4)", "x":12.5, "y":2.5}, + {"label":"K2D (C3,A5)", "x":13.5, "y":2.5, "w":1.5}, + {"label":"K2E (C3,A6)", "x":15.25, "y":2.5}, + {"label":"K2F (C3,A7)", "x":16.25, "y":2.5}, + {"label":"K2G (C3,C6)", "x":17.25, "y":2.5}, + + {"label":"K30 (C2,F0)", "x":0, "y":3.5, "w":1.75}, + {"label":"K31 (C2,F1)", "x":1.75, "y":3.5}, + {"label":"K32 (C2,F2)", "x":2.75, "y":3.5}, + {"label":"K33 (C2,F3)", "x":3.75, "y":3.5}, + {"label":"K34 (C2,F4)", "x":4.75, "y":3.5}, + {"label":"K35 (C2,F5)", "x":5.75, "y":3.5}, + {"label":"K36 (C2,F6)", "x":6.75, "y":3.5}, + {"label":"K37 (C2,F7)", "x":7.75, "y":3.5}, + {"label":"K38 (C2,A0)", "x":8.75, "y":3.5}, + {"label":"K39 (C2,A1)", "x":9.75, "y":3.5}, + {"label":"K3A (C2,A2)", "x":10.75, "y":3.5}, + {"label":"K3B (C2,A3)", "x":11.75, "y":3.5}, + {"label":"K3D (C2,A5)", "x":12.75, "y":3.5, "w":2.25}, + + {"label":"K40 (C1,F0)", "x":0, "y":4.5, "w":1.25}, + {"label":"K41 (C1,F1)", "x":1.25, "y":4.5}, + {"label":"K42 (C1,F2)", "x":2.25, "y":4.5}, + {"label":"K43 (C1,F3)", "x":3.25, "y":4.5}, + {"label":"K44 (C1,F4)", "x":4.25, "y":4.5}, + {"label":"K45 (C1,F5)", "x":5.25, "y":4.5}, + {"label":"K46 (C1,F6)", "x":6.25, "y":4.5}, + {"label":"K47 (C1,F7)", "x":7.25, "y":4.5}, + {"label":"K48 (C1,A0)", "x":8.25, "y":4.5}, + {"label":"K49 (C1,A1)", "x":9.25, "y":4.5}, + {"label":"K4A (C1,A2)", "x":10.25, "y":4.5}, + {"label":"K4B (C1,A3)", "x":11.25, "y":4.5}, + {"label":"K4C (C1,A4)", "x":12.25, "y":4.5, "w":2.75}, + {"label":"K4F (C1,A7)", "x":16.25, "y":4.5}, + + {"label":"K50 (C0,F0)", "x":0, "y":5.5, "w":1.25}, + {"label":"K51 (C0,F1)", "x":1.25, "y":5.5, "w":1.25}, + {"label":"K52 (C0,F2)", "x":2.5, "y":5.5, "w":1.25}, + {"label":"K56 (C0,F6)", "x":3.75, "y":5.5, "w":6.25}, + {"label":"K5A (C0,A2)", "x":10, "y":5.5, "w":1.25}, + {"label":"K5B (C0,A3)", "x":11.25, "y":5.5, "w":1.25}, + {"label":"K5C (C0,A4)", "x":12.5, "y":5.5, "w":1.25}, + {"label":"K5D (C0,A5)", "x":13.75, "y":5.5, "w":1.25}, + {"label":"K5E (C0,A6)", "x":15.25, "y":5.5}, + {"label":"K5F (C0,A7)", "x":16.25, "y":5.5}, + {"label":"K5G (C0,C6)", "x":17.25, "y":5.5} + ] + }, + "LAYOUT_tkl_ansi": { + "layout": [ + {"label":"K00 (C5,F0)", "x":0, "y":0}, + {"label":"K01 (C5,F1)", "x":2, "y":0}, + {"label":"K02 (C5,F2)", "x":3, "y":0}, + {"label":"K03 (C5,F3)", "x":4, "y":0}, + {"label":"K04 (C5,F4)", "x":5, "y":0}, + {"label":"K05 (C5,F5)", "x":6.5, "y":0}, + {"label":"K06 (C5,F6)", "x":7.5, "y":0}, + {"label":"K07 (C5,F7)", "x":8.5, "y":0}, + {"label":"K08 (C5,A0)", "x":9.5, "y":0}, + {"label":"K09 (C5,A1)", "x":11, "y":0}, + {"label":"K0A (C5,A2)", "x":12, "y":0}, + {"label":"K0B (C5,A3)", "x":13, "y":0}, + {"label":"K0C (C5,A4)", "x":14, "y":0}, + {"label":"K0E (C5,A6)", "x":15.25, "y":0}, + {"label":"K0F (C5,A7)", "x":16.25, "y":0}, + {"label":"K0G (C5,C6)", "x":17.25, "y":0}, + + {"label":"K10 (C4,F0)", "x":0, "y":1.5}, + {"label":"K11 (C4,F1)", "x":1, "y":1.5}, + {"label":"K12 (C4,F2)", "x":2, "y":1.5}, + {"label":"K13 (C4,F3)", "x":3, "y":1.5}, + {"label":"K14 (C4,F4)", "x":4, "y":1.5}, + {"label":"K15 (C4,F5)", "x":5, "y":1.5}, + {"label":"K16 (C4,F6)", "x":6, "y":1.5}, + {"label":"K17 (C4,F7)", "x":7, "y":1.5}, + {"label":"K18 (C4,A0)", "x":8, "y":1.5}, + {"label":"K19 (C4,A1)", "x":9, "y":1.5}, + {"label":"K1A (C4,A2)", "x":10, "y":1.5}, + {"label":"K1B (C4,A3)", "x":11, "y":1.5}, + {"label":"K1C (C4,A4)", "x":12, "y":1.5}, + {"label":"K1D (C4,A5)", "x":13, "y":1.5, "w":2}, + {"label":"K1E (C4,A6)", "x":15.25, "y":1.5}, + {"label":"K1F (C4,A7)", "x":16.25, "y":1.5}, + {"label":"K1G (C4,C6)", "x":17.25, "y":1.5}, + + {"label":"K20 (C3,F0)", "x":0, "y":2.5, "w":1.5}, + {"label":"K21 (C3,F1)", "x":1.5, "y":2.5}, + {"label":"K22 (C3,F2)", "x":2.5, "y":2.5}, + {"label":"K23 (C3,F3)", "x":3.5, "y":2.5}, + {"label":"K24 (C3,F4)", "x":4.5, "y":2.5}, + {"label":"K25 (C3,F5)", "x":5.5, "y":2.5}, + {"label":"K26 (C3,F6)", "x":6.5, "y":2.5}, + {"label":"K27 (C3,F7)", "x":7.5, "y":2.5}, + {"label":"K28 (C3,A0)", "x":8.5, "y":2.5}, + {"label":"K29 (C3,A1)", "x":9.5, "y":2.5}, + {"label":"K2A (C3,A2)", "x":10.5, "y":2.5}, + {"label":"K2B (C3,A3)", "x":11.5, "y":2.5}, + {"label":"K2C (C3,A4)", "x":12.5, "y":2.5}, + {"label":"K2D (C3,A5)", "x":13.5, "y":2.5, "w":1.5}, + {"label":"K2E (C3,A6)", "x":15.25, "y":2.5}, + {"label":"K2F (C3,A7)", "x":16.25, "y":2.5}, + {"label":"K2G (C3,C6)", "x":17.25, "y":2.5}, + + {"label":"K30 (C2,F0)", "x":0, "y":3.5, "w":1.75}, + {"label":"K31 (C2,F1)", "x":1.75, "y":3.5}, + {"label":"K32 (C2,F2)", "x":2.75, "y":3.5}, + {"label":"K33 (C2,F3)", "x":3.75, "y":3.5}, + {"label":"K34 (C2,F4)", "x":4.75, "y":3.5}, + {"label":"K35 (C2,F5)", "x":5.75, "y":3.5}, + {"label":"K36 (C2,F6)", "x":6.75, "y":3.5}, + {"label":"K37 (C2,F7)", "x":7.75, "y":3.5}, + {"label":"K38 (C2,A0)", "x":8.75, "y":3.5}, + {"label":"K39 (C2,A1)", "x":9.75, "y":3.5}, + {"label":"K3A (C2,A2)", "x":10.75, "y":3.5}, + {"label":"K3B (C2,A3)", "x":11.75, "y":3.5}, + {"label":"K3D (C2,A5)", "x":12.75, "y":3.5, "w":2.25}, + + {"label":"K40 (C1,F0)", "x":0, "y":4.5, "w":2.25}, + {"label":"K42 (C1,F2)", "x":2.25, "y":4.5}, + {"label":"K43 (C1,F3)", "x":3.25, "y":4.5}, + {"label":"K44 (C1,F4)", "x":4.25, "y":4.5}, + {"label":"K45 (C1,F5)", "x":5.25, "y":4.5}, + {"label":"K46 (C1,F6)", "x":6.25, "y":4.5}, + {"label":"K47 (C1,F7)", "x":7.25, "y":4.5}, + {"label":"K48 (C1,A0)", "x":8.25, "y":4.5}, + {"label":"K49 (C1,A1)", "x":9.25, "y":4.5}, + {"label":"K4A (C1,A2)", "x":10.25, "y":4.5}, + {"label":"K4B (C1,A3)", "x":11.25, "y":4.5}, + {"label":"K4C (C1,A4)", "x":12.25, "y":4.5, "w":2.75}, + {"label":"K4F (C1,A7)", "x":16.25, "y":4.5}, + + {"label":"K50 (C0,F0)", "x":0, "y":5.5, "w":1.25}, + {"label":"K51 (C0,F1)", "x":1.25, "y":5.5, "w":1.25}, + {"label":"K52 (C0,F2)", "x":2.5, "y":5.5, "w":1.25}, + {"label":"K56 (C0,F6)", "x":3.75, "y":5.5, "w":6.25}, + {"label":"K5A (C0,A2)", "x":10, "y":5.5, "w":1.25}, + {"label":"K5B (C0,A3)", "x":11.25, "y":5.5, "w":1.25}, + {"label":"K5C (C0,A4)", "x":12.5, "y":5.5, "w":1.25}, + {"label":"K5D (C0,A5)", "x":13.75, "y":5.5, "w":1.25}, + {"label":"K5E (C0,A6)", "x":15.25, "y":5.5}, + {"label":"K5F (C0,A7)", "x":16.25, "y":5.5}, + {"label":"K5G (C0,C6)", "x":17.25, "y":5.5} ] } } - ,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/" } diff --git a/keyboards/ggkeyboards/genesis/solder/keymaps/default/keymap.c b/keyboards/ggkeyboards/genesis/solder/keymaps/default/keymap.c index 98d778f1d1..4e7a2fd1fc 100644 --- a/keyboards/ggkeyboards/genesis/solder/keymaps/default/keymap.c +++ b/keyboards/ggkeyboards/genesis/solder/keymaps/default/keymap.c @@ -17,7 +17,7 @@ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( + [0] = LAYOUT_all( KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_SPC, KC_INS, KC_HOME, KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, @@ -25,7 +25,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, KC_LGUI, MO(1), KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT ), - [1] = LAYOUT( + [1] = LAYOUT_all( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, @@ -33,21 +33,5 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), - [2] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ), - [3] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ), -}; \ No newline at end of file +}; diff --git a/keyboards/ggkeyboards/genesis/solder/keymaps/via/keymap.c b/keyboards/ggkeyboards/genesis/solder/keymaps/via/keymap.c index 1084a6e220..1d22fbe318 100644 --- a/keyboards/ggkeyboards/genesis/solder/keymaps/via/keymap.c +++ b/keyboards/ggkeyboards/genesis/solder/keymaps/via/keymap.c @@ -17,7 +17,7 @@ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( + [0] = LAYOUT_all( KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_SPC, KC_INS, KC_HOME, KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, @@ -25,29 +25,29 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, KC_LGUI, MO(1), KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT ), - [1] = LAYOUT( + [1] = LAYOUT_all( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), - [2] = LAYOUT( + [2] = LAYOUT_all( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), - [3] = LAYOUT( + [3] = LAYOUT_all( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), -}; \ No newline at end of file +}; diff --git a/keyboards/ggkeyboards/genesis/solder/rules.mk b/keyboards/ggkeyboards/genesis/solder/rules.mk index 3dcae2d781..c5db939979 100644 --- a/keyboards/ggkeyboards/genesis/solder/rules.mk +++ b/keyboards/ggkeyboards/genesis/solder/rules.mk @@ -20,5 +20,4 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -# generated by KBFirmware JSON to QMK Parser -# https://noroadsleft.github.io/kbf_qmk_converter/ +LAYOUTS = tkl_ansi diff --git a/keyboards/ggkeyboards/genesis/solder/solder.c b/keyboards/ggkeyboards/genesis/solder/solder.c index 9e1bdeb0ff..6474550515 100644 --- a/keyboards/ggkeyboards/genesis/solder/solder.c +++ b/keyboards/ggkeyboards/genesis/solder/solder.c @@ -1,4 +1,3 @@ - /* Copyright 2021 Steven Phillips (Spooknik) * * This program is free software: you can redistribute it and/or modify @@ -16,7 +15,3 @@ */ #include "solder.h" - -// generated by KBFirmware JSON to QMK Parser -// https://noroadsleft.github.io/kbf_qmk_converter/ - diff --git a/keyboards/ggkeyboards/genesis/solder/solder.h b/keyboards/ggkeyboards/genesis/solder/solder.h index a5a96adf83..b95da8a592 100644 --- a/keyboards/ggkeyboards/genesis/solder/solder.h +++ b/keyboards/ggkeyboards/genesis/solder/solder.h @@ -18,7 +18,7 @@ #include "quantum.h" -#define LAYOUT( \ +#define LAYOUT_all( \ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0E, K0F, K0G, \ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K0D, K1E, K1F, K1G, \ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G, \ @@ -34,5 +34,18 @@ { K50, K51, K52, KC_NO, KC_NO, KC_NO, K56, KC_NO, KC_NO, KC_NO, K5A, K5B, K5C, K5D, K5E, K5F, K5G, KC_NO }, \ } -// generated by KBFirmware JSON to QMK Parser -// https://noroadsleft.github.io/kbf_qmk_converter/ \ No newline at end of file +#define LAYOUT_tkl_ansi( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0E, K0F, K0G, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \ + K40, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4F, \ + K50, K51, K52, K56, K5A, K5B, K5C, K5D, K5E, K5F, K5G \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, KC_NO, K0E, K0F, K0G, KC_NO }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G, KC_NO }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G, KC_NO }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, KC_NO, K3D, KC_NO, KC_NO, KC_NO, KC_NO }, \ + { K40, KC_NO, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, KC_NO, KC_NO, K4F, KC_NO, KC_NO }, \ + { K50, K51, K52, KC_NO, KC_NO, KC_NO, K56, KC_NO, KC_NO, KC_NO, K5A, K5B, K5C, K5D, K5E, K5F, K5G, KC_NO }, \ +} From 95733d1c165e0f8af031cd79e58e9a49539647bb Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Sun, 26 Sep 2021 07:01:11 +0000 Subject: [PATCH 130/595] Remove references to KBFirmware JSON Parser (#14608) * remove refs: exclusive/e85/soldered * remove refs: handwired/bigmac * remove refs: handwired/boss566y/redragon_vara * remove refs: handwired/marauder * remove refs: id67 * remove refs: kprepublic/bm60rgb * remove refs: playkbtw/helen80 * remove refs: sam/sg81m * remove refs: sawnsprojects/satxri6key * remove refs: yncognito/batpad --- keyboards/exclusive/e85/soldered/info.json | 1 - keyboards/handwired/bigmac/bigmac.c | 3 --- keyboards/handwired/bigmac/bigmac.h | 3 --- keyboards/handwired/bigmac/config.h | 4 ---- keyboards/handwired/bigmac/info.json | 1 - keyboards/handwired/bigmac/rules.mk | 3 --- keyboards/handwired/boss566y/redragon_vara/config.h | 6 +----- keyboards/handwired/boss566y/redragon_vara/info.json | 1 - keyboards/handwired/boss566y/redragon_vara/redragon_vara.h | 3 --- keyboards/handwired/marauder/config.h | 3 --- keyboards/handwired/marauder/info.json | 1 - keyboards/handwired/marauder/marauder.c | 3 --- keyboards/handwired/marauder/marauder.h | 3 --- keyboards/handwired/marauder/rules.mk | 3 --- keyboards/id67/config.h | 5 +---- keyboards/id67/id67.h | 5 +---- keyboards/id67/keymaps/default/keymap.c | 3 --- keyboards/id67/keymaps/via/keymap.c | 3 --- keyboards/id67/rules.mk | 3 --- keyboards/kprepublic/bm60rgb/bm60rgb.h | 4 ---- keyboards/kprepublic/bm60rgb/config.h | 3 --- keyboards/kprepublic/bm60rgb/info.json | 1 - keyboards/kprepublic/bm60rgb/rules.mk | 3 --- keyboards/playkbtw/helen80/helen80.h | 3 --- keyboards/playkbtw/helen80/info.json | 7 +++---- keyboards/playkbtw/helen80/rules.mk | 3 --- keyboards/sam/sg81m/config.h | 5 +---- keyboards/sam/sg81m/sg81m.h | 3 --- keyboards/sawnsprojects/satxri6key/info.json | 1 - keyboards/yncognito/batpad/batpad.h | 3 --- keyboards/yncognito/batpad/info.json | 1 - keyboards/yncognito/batpad/rules.mk | 3 --- 32 files changed, 7 insertions(+), 90 deletions(-) diff --git a/keyboards/exclusive/e85/soldered/info.json b/keyboards/exclusive/e85/soldered/info.json index 3d3bba2001..fa4be15647 100644 --- a/keyboards/exclusive/e85/soldered/info.json +++ b/keyboards/exclusive/e85/soldered/info.json @@ -284,5 +284,4 @@ ] } } - ,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/" } diff --git a/keyboards/handwired/bigmac/bigmac.c b/keyboards/handwired/bigmac/bigmac.c index b8815a1c4e..ef2867377d 100644 --- a/keyboards/handwired/bigmac/bigmac.c +++ b/keyboards/handwired/bigmac/bigmac.c @@ -15,6 +15,3 @@ */ #include "bigmac.h" - -// generated by KBFirmware JSON to QMK Parser -// https://noroadsleft.github.io/kbf_qmk_converter/ diff --git a/keyboards/handwired/bigmac/bigmac.h b/keyboards/handwired/bigmac/bigmac.h index 7e782e433d..43ba78d311 100644 --- a/keyboards/handwired/bigmac/bigmac.h +++ b/keyboards/handwired/bigmac/bigmac.h @@ -31,6 +31,3 @@ { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, K3F, K3G }, \ { K40, K41, KC_NO, K43, KC_NO, K45, K46, K47, K48, K49, KC_NO, K4B, KC_NO, K4D, K4E, K4F, K4G }, \ } - -// generated by KBFirmware JSON to QMK Parser -// https://noroadsleft.github.io/kbf_qmk_converter/ diff --git a/keyboards/handwired/bigmac/config.h b/keyboards/handwired/bigmac/config.h index db2ec2a5b7..b036accaa2 100644 --- a/keyboards/handwired/bigmac/config.h +++ b/keyboards/handwired/bigmac/config.h @@ -43,7 +43,3 @@ #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5, F4, D3, D2, D1, D0, D4, C6, D7, E6, B4 } #define DIODE_DIRECTION COL2ROW - - -// generated by KBFirmware JSON to QMK Parser -// https://noroadsleft.github.io/kbf_qmk_converter/ diff --git a/keyboards/handwired/bigmac/info.json b/keyboards/handwired/bigmac/info.json index 3be075fdd4..3774530912 100644 --- a/keyboards/handwired/bigmac/info.json +++ b/keyboards/handwired/bigmac/info.json @@ -89,5 +89,4 @@ ] } } - ,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/" } diff --git a/keyboards/handwired/bigmac/rules.mk b/keyboards/handwired/bigmac/rules.mk index 70867503b8..077733ea87 100644 --- a/keyboards/handwired/bigmac/rules.mk +++ b/keyboards/handwired/bigmac/rules.mk @@ -19,6 +19,3 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output - -# generated by KBFirmware JSON to QMK Parser -# https://noroadsleft.github.io/kbf_qmk_converter/ diff --git a/keyboards/handwired/boss566y/redragon_vara/config.h b/keyboards/handwired/boss566y/redragon_vara/config.h index 1508321545..8d731763b9 100644 --- a/keyboards/handwired/boss566y/redragon_vara/config.h +++ b/keyboards/handwired/boss566y/redragon_vara/config.h @@ -24,7 +24,7 @@ along with this program. If not, see . #define PRODUCT_ID 0x0001 #define DEVICE_VER 0x0001 #define MANUFACTURER PH -#define PRODUCT Redragon Vara +#define PRODUCT Redragon Vara /* key matrix size */ #define MATRIX_ROWS 12 @@ -44,7 +44,3 @@ along with this program. If not, see . #define MATRIX_COL_PINS { D1, D2, D3, C6, D5, C7, D4, D7, B4, B5, B6 } #define DIODE_DIRECTION COL2ROW - - -// generated by KBFirmware JSON to QMK Parser -// https://noroadsleft.github.io/kbf_qmk_converter/ \ No newline at end of file diff --git a/keyboards/handwired/boss566y/redragon_vara/info.json b/keyboards/handwired/boss566y/redragon_vara/info.json index 0948e6c9c8..235999bc32 100644 --- a/keyboards/handwired/boss566y/redragon_vara/info.json +++ b/keyboards/handwired/boss566y/redragon_vara/info.json @@ -112,5 +112,4 @@ ] } } - ,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/" } diff --git a/keyboards/handwired/boss566y/redragon_vara/redragon_vara.h b/keyboards/handwired/boss566y/redragon_vara/redragon_vara.h index d242311146..3809fa8ce4 100644 --- a/keyboards/handwired/boss566y/redragon_vara/redragon_vara.h +++ b/keyboards/handwired/boss566y/redragon_vara/redragon_vara.h @@ -38,6 +38,3 @@ { KC_NO, KA1, KA2, KA3, KC_NO, KA5, KC_NO, KC_NO, KA8, KC_NO, KAA }, \ { KB0, KB1, KC_NO, KB3, KB4, KB5, KB6, KB7, KC_NO, KB9, KBA }, \ } - -// generated by KBFirmware JSON to QMK Parser -// https://noroadsleft.github.io/kbf_qmk_converter/ diff --git a/keyboards/handwired/marauder/config.h b/keyboards/handwired/marauder/config.h index 450302d4d6..df30a6c226 100644 --- a/keyboards/handwired/marauder/config.h +++ b/keyboards/handwired/marauder/config.h @@ -66,6 +66,3 @@ // #define RGBLIGHT_EFFECT_RGB_TEST // #define RGBLIGHT_EFFECT_ALTERNATING #endif - -// generated by KBFirmware JSON to QMK Parser -// https://noroadsleft.github.io/kbf_qmk_converter/ diff --git a/keyboards/handwired/marauder/info.json b/keyboards/handwired/marauder/info.json index 1cea066749..d2e1be4ff8 100644 --- a/keyboards/handwired/marauder/info.json +++ b/keyboards/handwired/marauder/info.json @@ -102,5 +102,4 @@ ] } } - ,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/" } diff --git a/keyboards/handwired/marauder/marauder.c b/keyboards/handwired/marauder/marauder.c index 2b2039f105..c8f8781211 100644 --- a/keyboards/handwired/marauder/marauder.c +++ b/keyboards/handwired/marauder/marauder.c @@ -15,6 +15,3 @@ */ #include "marauder.h" - -// generated by KBFirmware JSON to QMK Parser -// https://noroadsleft.github.io/kbf_qmk_converter/ diff --git a/keyboards/handwired/marauder/marauder.h b/keyboards/handwired/marauder/marauder.h index fc97b1d642..a8201a8db8 100644 --- a/keyboards/handwired/marauder/marauder.h +++ b/keyboards/handwired/marauder/marauder.h @@ -39,6 +39,3 @@ { KA0, KA1, KA2, KA3, KC_NO, KC_NO, KA6, KA7, KA8 }, \ { KC_NO, KB1, KC_NO, KB3, KB4, KC_NO, KB6, KB7, KC_NO }, \ } - -// generated by KBFirmware JSON to QMK Parser -// https://noroadsleft.github.io/kbf_qmk_converter/ diff --git a/keyboards/handwired/marauder/rules.mk b/keyboards/handwired/marauder/rules.mk index 9fa4053dbc..8ddccad3be 100644 --- a/keyboards/handwired/marauder/rules.mk +++ b/keyboards/handwired/marauder/rules.mk @@ -20,6 +20,3 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output LTO_ENABLE = yes # Link Time Optimization, shrinks the output slightly - -# generated by KBFirmware JSON to QMK Parser -# https://noroadsleft.github.io/kbf_qmk_converter/ diff --git a/keyboards/id67/config.h b/keyboards/id67/config.h index c48e2b6a97..fbf99cf673 100644 --- a/keyboards/id67/config.h +++ b/keyboards/id67/config.h @@ -13,7 +13,7 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ - + #pragma once #include "config_common.h" @@ -65,6 +65,3 @@ // #define RGBLIGHT_EFFECT_RGB_TEST // #define RGBLIGHT_EFFECT_ALTERNATING #endif - -// partially generated by KBFirmware JSON to QMK Parser -// https://noroadsleft.github.io/kbf_qmk_converter/ diff --git a/keyboards/id67/id67.h b/keyboards/id67/id67.h index c9e6fb5d9c..7c0a6d5aa8 100644 --- a/keyboards/id67/id67.h +++ b/keyboards/id67/id67.h @@ -13,7 +13,7 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ - + #pragma once #include "quantum.h" @@ -31,6 +31,3 @@ { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ { K40, K41, KC_NO, K43, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, K4E }, \ } - -// partially generated by KBFirmware JSON to QMK Parser -// https://noroadsleft.github.io/kbf_qmk_converter/ \ No newline at end of file diff --git a/keyboards/id67/keymaps/default/keymap.c b/keyboards/id67/keymaps/default/keymap.c index d3fead64ff..3bb880891f 100644 --- a/keyboards/id67/keymaps/default/keymap.c +++ b/keyboards/id67/keymaps/default/keymap.c @@ -33,6 +33,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; - -// partially generated by KBFirmware JSON to QMK Parser -// https://noroadsleft.github.io/kbf_qmk_converter/ diff --git a/keyboards/id67/keymaps/via/keymap.c b/keyboards/id67/keymaps/via/keymap.c index 0651d8aae8..8155067b9f 100644 --- a/keyboards/id67/keymaps/via/keymap.c +++ b/keyboards/id67/keymaps/via/keymap.c @@ -46,6 +46,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______ ), }; - -// partially generated by KBFirmware JSON to QMK Parser -// https://noroadsleft.github.io/kbf_qmk_converter/ diff --git a/keyboards/id67/rules.mk b/keyboards/id67/rules.mk index 9580acdfc4..d58ff8f063 100644 --- a/keyboards/id67/rules.mk +++ b/keyboards/id67/rules.mk @@ -23,6 +23,3 @@ AUDIO_ENABLE = no # Audio output KEY_LOCK_ENABLE = yes # Enable KC_LOCK support LAYOUTS = 65_ansi_blocker - -# generated by KBFirmware JSON to QMK Parser -# https://noroadsleft.github.io/kbf_qmk_converter/ diff --git a/keyboards/kprepublic/bm60rgb/bm60rgb.h b/keyboards/kprepublic/bm60rgb/bm60rgb.h index 4a3dc2e83d..b648660d25 100644 --- a/keyboards/kprepublic/bm60rgb/bm60rgb.h +++ b/keyboards/kprepublic/bm60rgb/bm60rgb.h @@ -30,7 +30,3 @@ { KC_NO, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \ { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, K49, K4A, K4B, K4C, K4D }, \ } - -// generated by KBFirmware JSON to QMK Parser -// https://noroadsleft.github.io/kbf_qmk_converter/ - diff --git a/keyboards/kprepublic/bm60rgb/config.h b/keyboards/kprepublic/bm60rgb/config.h index bbb38e24fd..e445efd00c 100644 --- a/keyboards/kprepublic/bm60rgb/config.h +++ b/keyboards/kprepublic/bm60rgb/config.h @@ -57,6 +57,3 @@ along with this program. If not, see . #ifdef RGB_MATRIX_ENABLE # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 180 // Limit to vendor-recommended value #endif - -// generated by KBFirmware JSON to QMK Parser -// https://noroadsleft.github.io/kbf_qmk_converter/ diff --git a/keyboards/kprepublic/bm60rgb/info.json b/keyboards/kprepublic/bm60rgb/info.json index de6ed90a5b..264286334a 100644 --- a/keyboards/kprepublic/bm60rgb/info.json +++ b/keyboards/kprepublic/bm60rgb/info.json @@ -74,5 +74,4 @@ ] } } - ,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/" } diff --git a/keyboards/kprepublic/bm60rgb/rules.mk b/keyboards/kprepublic/bm60rgb/rules.mk index ca52d16a44..e147a36b86 100644 --- a/keyboards/kprepublic/bm60rgb/rules.mk +++ b/keyboards/kprepublic/bm60rgb/rules.mk @@ -25,6 +25,3 @@ RGB_MATRIX_DRIVER = WS2812 LTO_ENABLE = yes LAYOUTS = 60_ansi_arrow - -# partially generated by KBFirmware JSON to QMK Parser -# https://noroadsleft.github.io/kbf_qmk_converter/ diff --git a/keyboards/playkbtw/helen80/helen80.h b/keyboards/playkbtw/helen80/helen80.h index e1a25ea84e..ffb6275a61 100644 --- a/keyboards/playkbtw/helen80/helen80.h +++ b/keyboards/playkbtw/helen80/helen80.h @@ -33,6 +33,3 @@ { K40, KC_NO, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, KC_NO, K4C }, \ { K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K5A, K5B, K5C, K5D, K5E }, \ } - -// generated by KBFirmware JSON to QMK Parser -// https://noroadsleft.github.io/kbf_qmk_converter/ diff --git a/keyboards/playkbtw/helen80/info.json b/keyboards/playkbtw/helen80/info.json index 34e3384b38..1112fafd21 100644 --- a/keyboards/playkbtw/helen80/info.json +++ b/keyboards/playkbtw/helen80/info.json @@ -33,7 +33,7 @@ {"label":"K19 (B7,C6)", "x":9, "y":1.5}, {"label":"K1A (B7,B5)", "x":10, "y":1.5}, {"label":"K1B (B7,F4)", "x":11, "y":1.5}, - {"label":"K1C (B7,F1)", "x":12, "y":1.5}, + {"label":"K1C (B7,F1)", "x":12, "y":1.5}, {"label":"K1E (B7,B0)", "x":13, "y":1.5, "w":2}, {"label":"K5B (D7,F4)", "x":15.25, "y":1.5}, {"label":"K5C (D7,F1)", "x":16.25, "y":1.5}, @@ -68,7 +68,7 @@ {"label":"K3A (F0,B5)", "x":10.75, "y":3.5}, {"label":"K3B (F0,F4)", "x":11.75, "y":3.5}, {"label":"K3C (F0,F1)", "x":12.75, "y":3.5, "w":2.25}, - {"label":"K40 (D6,D1)", "x":0, "y":4.5, "w":2.25}, + {"label":"K40 (D6,D1)", "x":0, "y":4.5, "w":2.25}, {"label":"K42 (D6,F7)", "x":2.25, "y":4.5}, {"label":"K43 (D6,F6)", "x":3.25, "y":4.5}, {"label":"K44 (D6,F5)", "x":4.25, "y":4.5}, @@ -79,7 +79,7 @@ {"label":"K49 (D6,C6)", "x":9.25, "y":4.5}, {"label":"K4A (D6,B5)", "x":10.25, "y":4.5}, {"label":"K4B (D6,F4)", "x":11.25, "y":4.5}, - {"label":"K4C (D6,F1)", "x":12.25, "y":4.5, "w":2.75}, + {"label":"K4C (D6,F1)", "x":12.25, "y":4.5, "w":2.75}, {"label":"K4E (D6,B0)", "x":16.25, "y":4.5}, {"label":"K50 (D7,D1)", "x":0, "y":5.5, "w":1.25}, {"label":"K51 (D7,D0)", "x":1.25, "y":5.5, "w":1.25}, @@ -95,5 +95,4 @@ ] } } - ,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/" } diff --git a/keyboards/playkbtw/helen80/rules.mk b/keyboards/playkbtw/helen80/rules.mk index 149e878d6c..0163d38c55 100644 --- a/keyboards/playkbtw/helen80/rules.mk +++ b/keyboards/playkbtw/helen80/rules.mk @@ -24,6 +24,3 @@ LTO_ENABLE = yes KEY_LOCK_ENABLE = no # Enable KC_LOCK support LAYOUTS = tkl_ansi - -# generated by KBFirmware JSON to QMK Parser -# https://noroadsleft.github.io/kbf_qmk_converter/ diff --git a/keyboards/sam/sg81m/config.h b/keyboards/sam/sg81m/config.h index 5e1d042b6c..a0dca89211 100644 --- a/keyboards/sam/sg81m/config.h +++ b/keyboards/sam/sg81m/config.h @@ -44,7 +44,7 @@ #define DIODE_DIRECTION COL2ROW -#define RGB_DI_PIN E6 //reserved pin for potential underglow rgb +#define RGB_DI_PIN E6 //reserved pin for potential underglow rgb #ifdef RGB_DI_PIN #define RGBLED_NUM 10 #define RGBLIGHT_HUE_STEP 8 @@ -65,6 +65,3 @@ // #define RGBLIGHT_EFFECT_RGB_TEST // #define RGBLIGHT_EFFECT_ALTERNATING #endif - -// generated by KBFirmware JSON to QMK Parser -// https://noroadsleft.github.io/kbf_qmk_converter/ diff --git a/keyboards/sam/sg81m/sg81m.h b/keyboards/sam/sg81m/sg81m.h index 13a5d760e2..d128adf746 100644 --- a/keyboards/sam/sg81m/sg81m.h +++ b/keyboards/sam/sg81m/sg81m.h @@ -49,6 +49,3 @@ } #define LAYOUT LAYOUT_7u_space - -// generated by KBFirmware JSON to QMK Parser -// https://noroadsleft.github.io/kbf_qmk_converter/ diff --git a/keyboards/sawnsprojects/satxri6key/info.json b/keyboards/sawnsprojects/satxri6key/info.json index 1931e1a21f..77897e179c 100644 --- a/keyboards/sawnsprojects/satxri6key/info.json +++ b/keyboards/sawnsprojects/satxri6key/info.json @@ -14,5 +14,4 @@ ] } } - ,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/" } diff --git a/keyboards/yncognito/batpad/batpad.h b/keyboards/yncognito/batpad/batpad.h index 1cc79edf81..e3391881bc 100644 --- a/keyboards/yncognito/batpad/batpad.h +++ b/keyboards/yncognito/batpad/batpad.h @@ -24,6 +24,3 @@ { K00, K01, K02, K03 }, \ { K10, K11, K12, K13 }, \ } - -// generated by KBFirmware JSON to QMK Parser -// https://noroadsleft.github.io/kbf_qmk_converter/ diff --git a/keyboards/yncognito/batpad/info.json b/keyboards/yncognito/batpad/info.json index 75848d1408..393fff5947 100644 --- a/keyboards/yncognito/batpad/info.json +++ b/keyboards/yncognito/batpad/info.json @@ -16,5 +16,4 @@ ] } } - ,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/" } diff --git a/keyboards/yncognito/batpad/rules.mk b/keyboards/yncognito/batpad/rules.mk index 0863a93c52..58fa541ec6 100644 --- a/keyboards/yncognito/batpad/rules.mk +++ b/keyboards/yncognito/batpad/rules.mk @@ -21,6 +21,3 @@ RGB_MATRIX_ENABLE = yes RGB_MATRIX_DRIVER = WS2812 UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output - -# generated by KBFirmware JSON to QMK Parser -# https://noroadsleft.github.io/kbf_qmk_converter/ From 6f36eb469d11fd9619add54c2e037e50069d1eee Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Sun, 26 Sep 2021 09:57:20 +0000 Subject: [PATCH 131/595] Remove unused `IS_COMMAND()` instances and Magic Key definitions (#14610) * Remove unused IS_COMMAND() instances from keyboard-level config.h, 0-9 * Remove unused IS_COMMAND() instances from keyboard-level config.h, A-B * Remove unused IS_COMMAND() instances from keyboard-level config.h, C-D * Remove unused IS_COMMAND() instances from keyboard-level config.h, E-G * Remove unused IS_COMMAND() instances from keyboard-level config.h, handwired * Remove unused IS_COMMAND() instances from keyboard-level config.h, H-M * Remove unused IS_COMMAND() instances from keyboard-level config.h, N-R * Remove unused IS_COMMAND() instances from keyboard-level config.h, S-Z * Remove unused Magic Key definitions from keyboard-level config.h, 0-9 * Remove unused Magic Key definitions from keyboard-level config.h, A * Remove unused Magic Key definitions from keyboard-level config.h, B * Remove unused Magic Key definitions from keyboard-level config.h, C * Remove unused Magic Key definitions from keyboard-level config.h, D-E * Remove unused Magic Key definitions from keyboard-level config.h, F-H * Remove unused Magic Key definitions from keyboard-level config.h, handwired * Remove unused Magic Key definitions from keyboard-level config.h, I-K * Remove unused Magic Key definitions from keyboard-level config.h, L-M * Remove unused Magic Key definitions from keyboard-level config.h, N-R * Remove unused Magic Key definitions from keyboard-level config.h, S-V * Remove unused Magic Key definitions from keyboard-level config.h, W-Z * Merge remote-tracking branch 'upstream/master' into clean/command_and_magic * Remove remaining unused IS_COMMAND() instances from keyboard-level config.h --- keyboards/1upkeyboards/1up60hse/config.h | 48 ---------------- keyboards/1upkeyboards/super16/config.h | 52 ------------------ keyboards/40percentclub/25/config.h | 48 ---------------- keyboards/40percentclub/4pack/config.h | 53 ------------------ keyboards/40percentclub/4x4/config.h | 48 ---------------- keyboards/40percentclub/5x5/config.h | 48 ---------------- keyboards/40percentclub/6lit/config.h | 48 ---------------- keyboards/40percentclub/foobar/config.h | 48 ---------------- keyboards/40percentclub/half_n_half/config.h | 52 ------------------ keyboards/40percentclub/i75/config.h | 48 ---------------- keyboards/40percentclub/mf68/config.h | 48 ---------------- keyboards/40percentclub/nein/config.h | 53 ------------------ keyboards/40percentclub/nori/config.h | 48 ---------------- keyboards/abstract/ellipse/rev1/config.h | 48 ---------------- keyboards/acheron/elongate/config.h | 53 ------------------ keyboards/acheron/shark/config.h | 53 ------------------ keyboards/adelheid/config.h | 53 ------------------ keyboards/ai03/equinox/config.h | 53 ------------------ keyboards/ai03/lunar/config.h | 52 ------------------ keyboards/ai03/orbit/config.h | 48 ---------------- keyboards/ai03/orbit_x/config.h | 53 ------------------ keyboards/ai03/polaris/config.h | 53 ------------------ keyboards/ai03/quasar/config.h | 53 ------------------ keyboards/alf/dc60/config.h | 48 ---------------- keyboards/alf/x11/config.h | 53 ------------------ keyboards/allison/config.h | 53 ------------------ keyboards/allison_numpad/config.h | 53 ------------------ keyboards/angel17/alpha/config.h | 53 ------------------ keyboards/angel17/rev1/config.h | 53 ------------------ keyboards/angel64/alpha/config.h | 53 ------------------ keyboards/angel64/rev1/config.h | 53 ------------------ keyboards/ares/config.h | 4 -- keyboards/arisu/config.h | 53 ------------------ keyboards/ash1800/config.h | 53 ------------------ keyboards/ashpil/modelm_usbc/config.h | 55 +------------------ keyboards/atxkb/1894/config.h | 53 ------------------ keyboards/baguette/config.h | 48 ---------------- keyboards/bakeneko80/config.h | 53 ------------------ keyboards/bat43/config.h | 53 ------------------ keyboards/blockey/config.h | 48 ---------------- keyboards/boardsource/3x4/config.h | 48 ---------------- keyboards/boardsource/4x12/config.h | 48 ---------------- keyboards/boardsource/5x12/config.h | 48 ---------------- keyboards/bpiphany/frosty_flake/config.h | 48 ---------------- keyboards/bpiphany/kitten_paw/config.h | 48 ---------------- keyboards/bpiphany/sixshooter/config.h | 48 ---------------- keyboards/bpiphany/tiger_lily/config.h | 48 ---------------- keyboards/bpiphany/unloved_bastard/config.h | 48 ---------------- keyboards/bthlabs/geekpad/config.h | 48 ---------------- keyboards/business_card/alpha/config.h | 53 ------------------ keyboards/business_card/beta/config.h | 53 ------------------ keyboards/c39/config.h | 12 ---- keyboards/chidori/config.h | 37 ------------- keyboards/chili/config.h | 48 ---------------- keyboards/choc_taro/config.h | 53 ------------------ keyboards/ckeys/handwire_101/config.h | 48 ---------------- keyboards/ckeys/nakey/config.h | 48 ---------------- keyboards/ckeys/obelus/config.h | 48 ---------------- keyboards/ckeys/thedora/config.h | 48 ---------------- keyboards/ckeys/washington/config.h | 53 ------------------ keyboards/coarse/vinta/config.h | 12 ---- keyboards/converter/modelm101/config.h | 53 ------------------ .../copenhagen_click/click_pad_v1/config.h | 53 ------------------ keyboards/coseyfannitutti/discipad/config.h | 53 ------------------ keyboards/coseyfannitutti/discipline/config.h | 53 ------------------ keyboards/coseyfannitutti/mysterium/config.h | 53 ------------------ keyboards/coseyfannitutti/romeo/config.h | 53 ------------------ keyboards/craftwalk/config.h | 53 ------------------ keyboards/cu24/config.h | 48 ---------------- keyboards/cu75/config.h | 48 ---------------- keyboards/cutie_club/wraith/config.h | 53 ------------------ keyboards/delikeeb/flatbread60/config.h | 53 ------------------ keyboards/delikeeb/vaneela/config.h | 53 ------------------ keyboards/delikeeb/vaneelaex/config.h | 53 ------------------ keyboards/diverge3/config.h | 48 ---------------- keyboards/dm9records/plaid/config.h | 53 ------------------ keyboards/dm9records/tartan/config.h | 53 ------------------ keyboards/doppelganger/config.h | 53 ------------------ keyboards/dozen0/config.h | 48 ---------------- keyboards/duck/jetfire/config.h | 49 ----------------- keyboards/eniigmakeyboards/ek65/config.h | 53 ------------------ keyboards/eniigmakeyboards/ek87/config.h | 53 ------------------ keyboards/ep/96/config.h | 49 ----------------- keyboards/ep/comsn/mollydooker/config.h | 49 ----------------- keyboards/ergosaurus/config.h | 53 ------------------ .../ericrlau/numdiscipline/rev1/config.h | 53 ------------------ keyboards/evyd13/eon40/config.h | 53 ------------------ keyboards/evyd13/eon65/config.h | 53 ------------------ keyboards/evyd13/eon75/config.h | 54 ------------------ keyboards/evyd13/eon87/config.h | 53 ------------------ keyboards/evyd13/eon95/config.h | 53 ------------------ keyboards/evyd13/minitomic/config.h | 53 ------------------ keyboards/evyd13/mx5160/config.h | 53 ------------------ keyboards/evyd13/nt660/config.h | 53 ------------------ keyboards/evyd13/omrontkl/config.h | 53 ------------------ keyboards/evyd13/pockettype/config.h | 53 ------------------ keyboards/evyd13/wasdat/config.h | 53 ------------------ keyboards/evyd13/wasdat_code/config.h | 53 ------------------ keyboards/exclusive/e7v1se/config.h | 53 ------------------ keyboards/exclusive/e85/config.h | 53 ------------------ keyboards/felix/config.h | 53 ------------------ keyboards/flehrad/downbubble/config.h | 48 ---------------- keyboards/fleuron/config.h | 48 ---------------- keyboards/fluorite/config.h | 52 ------------------ keyboards/for_science/config.h | 4 -- keyboards/foxlab/key65/hotswap/config.h | 53 ------------------ keyboards/foxlab/key65/universal/config.h | 53 ------------------ keyboards/foxlab/leaf60/hotswap/config.h | 53 ------------------ keyboards/foxlab/leaf60/universal/config.h | 53 ------------------ keyboards/ft/mars80/config.h | 4 -- keyboards/gh60/revc/config.h | 48 ---------------- keyboards/ghs/rar/config.h | 53 ------------------ keyboards/gingham/config.h | 53 ------------------ keyboards/gray_studio/space65/config.h | 52 ------------------ keyboards/halberd/config.h | 48 ---------------- keyboards/handwired/2x5keypad/config.h | 7 --- keyboards/handwired/412_64/config.h | 48 ---------------- keyboards/handwired/aranck/config.h | 53 ------------------ keyboards/handwired/arrow_pad/config.h | 48 ---------------- keyboards/handwired/atreus50/config.h | 48 ---------------- keyboards/handwired/cmd60/config.h | 48 ---------------- keyboards/handwired/co60/rev1/config.h | 48 ---------------- keyboards/handwired/dactyl_left/config.h | 53 ------------------ keyboards/handwired/fc200rt_qmk/config.h | 53 ------------------ keyboards/handwired/fivethirteen/config.h | 48 ---------------- keyboards/handwired/floorboard/config.h | 53 ------------------ keyboards/handwired/gamenum/config.h | 48 ---------------- keyboards/handwired/hacked_motospeed/config.h | 53 ------------------ keyboards/handwired/heisenberg/config.h | 53 ------------------ keyboards/handwired/hnah40/config.h | 51 ----------------- keyboards/handwired/ibm122m/config.h | 48 ---------------- keyboards/handwired/jopr/config.h | 2 +- .../handwired/jtallbean/split_65/config.h | 53 ------------------ keyboards/handwired/juliet/config.h | 53 ------------------ keyboards/handwired/kbod/config.h | 48 ---------------- keyboards/handwired/magicforce61/config.h | 48 ---------------- keyboards/handwired/magicforce68/config.h | 48 ---------------- .../handwired/mechboards_micropad/config.h | 53 ------------------ keyboards/handwired/numpad20/config.h | 48 ---------------- keyboards/handwired/ortho5x13/config.h | 48 ---------------- keyboards/handwired/owlet60/config.h | 53 ------------------ keyboards/handwired/pilcrow/config.h | 48 ---------------- keyboards/handwired/promethium/config.h | 47 ++++------------ keyboards/handwired/reddot/config.h | 48 ---------------- keyboards/handwired/retro_refit/config.h | 42 +++----------- keyboards/handwired/sick68/config.h | 53 ------------------ keyboards/handwired/sticc14/config.h | 53 ------------------ keyboards/handwired/tennie/config.h | 48 ---------------- keyboards/handwired/terminus_mini/config.h | 48 ---------------- keyboards/handwired/twadlee/tp69/config.h | 53 ------------------ keyboards/hecomi/alpha/config.h | 49 ----------------- keyboards/helix/rev3_4rows/config.h | 53 ------------------ keyboards/helix/rev3_5rows/config.h | 53 ------------------ keyboards/hid_liber/config.h | 48 ---------------- keyboards/hineybush/h75_singa/config.h | 53 ------------------ keyboards/hineybush/physix/config.h | 53 ------------------ keyboards/hineybush/sm68/config.h | 53 ------------------ keyboards/idb/idb_60/config.h | 48 ---------------- keyboards/idobo/config.h | 48 ---------------- keyboards/illuminati/is0/config.h | 53 ------------------ keyboards/j80/config.h | 4 -- keyboards/jae/j01/config.h | 53 ------------------ keyboards/kagamidget/config.h | 48 ---------------- keyboards/kbdclack/kaishi65/config.h | 53 ------------------ keyboards/kbdfans/kbd19x/config.h | 48 ---------------- keyboards/kbdfans/kbd4x/config.h | 48 ---------------- keyboards/kbdfans/kbd66/config.h | 48 ---------------- keyboards/kbdfans/kbd67/hotswap/config.h | 48 ---------------- keyboards/kbdfans/kbd67/rev1/config.h | 48 ---------------- keyboards/kbdfans/kbd6x/config.h | 48 ---------------- keyboards/kbdfans/kbd8x_mk2/config.h | 53 ------------------ keyboards/kbdfans/kbdpad_mk2/config.h | 53 ------------------ keyboards/kc60se/config.h | 48 ---------------- keyboards/keebio/choconum/config.h | 53 ------------------ keyboards/keebio/ergodicity/config.h | 53 ------------------ keyboards/keebwerk/nano_slider/config.h | 53 ------------------ keyboards/keebzdotnet/wazowski/config.h | 53 ------------------ keyboards/keyhive/maypad/config.h | 53 ------------------ keyboards/kinesis/config.h | 48 ---------------- keyboards/kira75/config.h | 48 ---------------- keyboards/kmac/config.h | 48 ---------------- keyboards/knops/mini/config.h | 50 ----------------- keyboards/kona_classic/config.h | 48 ---------------- keyboards/kprepublic/bm16a/config.h | 53 ------------------ keyboards/kprepublic/cospad/config.h | 53 ------------------ keyboards/kprepublic/jj40/config.h | 4 -- keyboards/kprepublic/jj4x4/config.h | 4 -- keyboards/ktec/daisy/config.h | 53 ------------------ keyboards/lfkeyboards/lfk65_hs/config.h | 48 ---------------- keyboards/lfkeyboards/lfk78/config.h | 53 ------------------ keyboards/lfkeyboards/lfk87/config.h | 48 ---------------- keyboards/lfkeyboards/lfkpad/config.h | 53 ------------------ keyboards/lfkeyboards/mini1800/config.h | 48 ---------------- keyboards/mechkeys/mk60/config.h | 53 ------------------ keyboards/mechlovin/hannah910/config.h | 53 ------------------ keyboards/meira/featherble/config.h | 48 ---------------- keyboards/meira/promicro/config.h | 48 ---------------- keyboards/meishi/config.h | 48 ---------------- keyboards/meishi2/config.h | 53 ------------------ keyboards/meme/config.h | 48 ---------------- keyboards/meson/config.h | 53 ------------------ keyboards/metamechs/timberwolf/config.h | 52 ------------------ keyboards/miniaxe/config.h | 48 ---------------- keyboards/mint60/config.h | 47 ---------------- keyboards/miuni32/config.h | 47 ---------------- keyboards/mountainblocks/mb17/config.h | 53 ------------------ keyboards/mt40/config.h | 48 ---------------- keyboards/mxss/config.h | 48 ---------------- keyboards/namecard2x4/rev1/config.h | 48 ---------------- keyboards/namecard2x4/rev2/config.h | 48 ---------------- keyboards/nightly_boards/n87/config.h | 53 ------------------ keyboards/nightmare/config.h | 53 ------------------ keyboards/novelpad/config.h | 53 ------------------ keyboards/noxary/220/config.h | 53 ------------------ keyboards/noxary/260/config.h | 53 ------------------ keyboards/noxary/268_2/config.h | 53 ------------------ keyboards/noxary/280/config.h | 53 ------------------ keyboards/noxary/x268/config.h | 48 ---------------- keyboards/otaku_split/rev0/config.h | 53 ------------------ keyboards/otaku_split/rev1/config.h | 53 ------------------ keyboards/pdxkbc/config.h | 53 ------------------ keyboards/quad_h/lb75/config.h | 53 ------------------ keyboards/quantrik/kyuu/config.h | 53 ------------------ keyboards/qwertyydox/config.h | 53 ------------------ keyboards/rabbit/rabbit68/config.h | 53 ------------------ keyboards/ramonimbao/herringbone/v1/config.h | 53 ------------------ keyboards/redscarf_iiplus/verb/config.h | 53 ------------------ keyboards/redscarf_iiplus/verc/config.h | 53 ------------------ keyboards/redscarf_iiplus/verd/config.h | 53 ------------------ keyboards/retro_75/config.h | 53 ------------------ keyboards/reviung34/config.h | 53 ------------------ keyboards/reviung39/config.h | 53 ------------------ keyboards/reviung41/config.h | 53 ------------------ keyboards/ryanbaekr/rb86/config.h | 54 ------------------ keyboards/sck/m0116b/config.h | 53 ------------------ keyboards/sck/osa/config.h | 53 ------------------ keyboards/scythe/config.h | 48 ---------------- keyboards/shiro/config.h | 53 ------------------ keyboards/silverbullet44/config.h | 53 ------------------ keyboards/sixkeyboard/config.h | 39 ------------- keyboards/snampad/config.h | 52 ------------------ keyboards/spacetime/config.h | 52 ------------------ keyboards/standaside/config.h | 48 ---------------- keyboards/suihankey/alpha/config.h | 53 ------------------ keyboards/suihankey/rev1/config.h | 53 ------------------ keyboards/suihankey/split/alpha/config.h | 53 ------------------ keyboards/suihankey/split/rev1/config.h | 53 ------------------ keyboards/switchplate/southpaw_65/config.h | 52 ------------------ .../switchplate/southpaw_fullsize/config.h | 53 ------------------ keyboards/tg4x/config.h | 53 ------------------ keyboards/tgr/910/config.h | 4 -- keyboards/tgr/tris/config.h | 4 -- keyboards/the_ruler/config.h | 48 ---------------- keyboards/thedogkeyboard/config.h | 53 ------------------ keyboards/thevankeyboards/roadkit/config.h | 48 ---------------- keyboards/tkc/osav2/config.h | 53 ------------------ keyboards/tkc/tkc1800/config.h | 48 ---------------- keyboards/tmo50/config.h | 48 ---------------- keyboards/treadstone48/rev1/config.h | 53 ------------------ keyboards/treadstone48/rev2/config.h | 53 ------------------ keyboards/treasure/type9/config.h | 48 ---------------- keyboards/ua62/config.h | 53 ------------------ keyboards/uranuma/config.h | 53 ------------------ keyboards/v60_type_r/config.h | 48 ---------------- keyboards/wallaby/config.h | 53 ------------------ keyboards/westfoxtrot/cyclops/config.h | 48 ---------------- .../wilba_tech/rama_works_m10_b/config.h | 48 ---------------- .../wilba_tech/rama_works_u80_a/config.h | 48 ---------------- keyboards/wilba_tech/wt60_a/config.h | 48 ---------------- keyboards/wilba_tech/wt60_d/config.h | 48 ---------------- keyboards/wilba_tech/wt60_xt/config.h | 48 ---------------- keyboards/wilba_tech/wt65_a/config.h | 48 ---------------- keyboards/wilba_tech/wt65_b/config.h | 48 ---------------- keyboards/wilba_tech/wt69_a/config.h | 48 ---------------- keyboards/wilba_tech/wt75_a/config.h | 48 ---------------- keyboards/wilba_tech/wt75_b/config.h | 48 ---------------- keyboards/wilba_tech/wt75_c/config.h | 48 ---------------- keyboards/wilba_tech/wt80_a/config.h | 48 ---------------- keyboards/x16/config.h | 53 ------------------ keyboards/xiudi/xd84/config.h | 52 ------------------ keyboards/xiudi/xd87/config.h | 48 ---------------- keyboards/xiudi/xd96/config.h | 52 ------------------ keyboards/yd68/config.h | 48 ---------------- keyboards/yurei/config.h | 53 ------------------ keyboards/yushakobo/quick7/config.h | 53 ------------------ keyboards/zvecr/split_blackpill/config.h | 53 ------------------ keyboards/zvecr/zv48/config.h | 53 ------------------ 287 files changed, 23 insertions(+), 14010 deletions(-) diff --git a/keyboards/1upkeyboards/1up60hse/config.h b/keyboards/1upkeyboards/1up60hse/config.h index a38ccf383c..7a7fa56fe5 100644 --- a/keyboards/1upkeyboards/1up60hse/config.h +++ b/keyboards/1upkeyboards/1up60hse/config.h @@ -100,54 +100,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/1upkeyboards/super16/config.h b/keyboards/1upkeyboards/super16/config.h index f943fed54c..2e9312e639 100644 --- a/keyboards/1upkeyboards/super16/config.h +++ b/keyboards/1upkeyboards/super16/config.h @@ -125,58 +125,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/40percentclub/25/config.h b/keyboards/40percentclub/25/config.h index d43c59e06d..af25449abc 100644 --- a/keyboards/40percentclub/25/config.h +++ b/keyboards/40percentclub/25/config.h @@ -108,54 +108,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/40percentclub/4pack/config.h b/keyboards/40percentclub/4pack/config.h index 00f0d3e57e..db51715922 100644 --- a/keyboards/40percentclub/4pack/config.h +++ b/keyboards/40percentclub/4pack/config.h @@ -129,59 +129,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/40percentclub/4x4/config.h b/keyboards/40percentclub/4x4/config.h index f3ed8ed22d..77b6e7c58b 100644 --- a/keyboards/40percentclub/4x4/config.h +++ b/keyboards/40percentclub/4x4/config.h @@ -75,54 +75,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/40percentclub/5x5/config.h b/keyboards/40percentclub/5x5/config.h index 6f098a80ba..694a589852 100644 --- a/keyboards/40percentclub/5x5/config.h +++ b/keyboards/40percentclub/5x5/config.h @@ -84,54 +84,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/40percentclub/6lit/config.h b/keyboards/40percentclub/6lit/config.h index a7a68fc73d..ddf91a3ce5 100644 --- a/keyboards/40percentclub/6lit/config.h +++ b/keyboards/40percentclub/6lit/config.h @@ -109,54 +109,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/40percentclub/foobar/config.h b/keyboards/40percentclub/foobar/config.h index 203ebd77f1..999efef7f5 100644 --- a/keyboards/40percentclub/foobar/config.h +++ b/keyboards/40percentclub/foobar/config.h @@ -109,54 +109,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/40percentclub/half_n_half/config.h b/keyboards/40percentclub/half_n_half/config.h index ca099d4760..3409af5f68 100644 --- a/keyboards/40percentclub/half_n_half/config.h +++ b/keyboards/40percentclub/half_n_half/config.h @@ -118,58 +118,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/40percentclub/i75/config.h b/keyboards/40percentclub/i75/config.h index 0f478b516c..e89f4f5806 100644 --- a/keyboards/40percentclub/i75/config.h +++ b/keyboards/40percentclub/i75/config.h @@ -64,54 +64,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/40percentclub/mf68/config.h b/keyboards/40percentclub/mf68/config.h index 1ff2c189e5..2307256154 100644 --- a/keyboards/40percentclub/mf68/config.h +++ b/keyboards/40percentclub/mf68/config.h @@ -107,54 +107,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/40percentclub/nein/config.h b/keyboards/40percentclub/nein/config.h index 3532c8258b..1dedb608f9 100644 --- a/keyboards/40percentclub/nein/config.h +++ b/keyboards/40percentclub/nein/config.h @@ -113,59 +113,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/40percentclub/nori/config.h b/keyboards/40percentclub/nori/config.h index 1c1d8f0fb8..40225748ac 100644 --- a/keyboards/40percentclub/nori/config.h +++ b/keyboards/40percentclub/nori/config.h @@ -97,54 +97,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/abstract/ellipse/rev1/config.h b/keyboards/abstract/ellipse/rev1/config.h index fe36874806..6e16c8d228 100644 --- a/keyboards/abstract/ellipse/rev1/config.h +++ b/keyboards/abstract/ellipse/rev1/config.h @@ -112,54 +112,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/acheron/elongate/config.h b/keyboards/acheron/elongate/config.h index c51c7a8213..434e62cd86 100644 --- a/keyboards/acheron/elongate/config.h +++ b/keyboards/acheron/elongate/config.h @@ -121,59 +121,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/acheron/shark/config.h b/keyboards/acheron/shark/config.h index 3adcb060d7..78f763fe90 100644 --- a/keyboards/acheron/shark/config.h +++ b/keyboards/acheron/shark/config.h @@ -133,59 +133,6 @@ B0, which is unconnected on the PCB */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/adelheid/config.h b/keyboards/adelheid/config.h index fb57c39565..487559af16 100644 --- a/keyboards/adelheid/config.h +++ b/keyboards/adelheid/config.h @@ -112,59 +112,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/ai03/equinox/config.h b/keyboards/ai03/equinox/config.h index 1441dc16ec..5130f510b6 100644 --- a/keyboards/ai03/equinox/config.h +++ b/keyboards/ai03/equinox/config.h @@ -117,59 +117,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/ai03/lunar/config.h b/keyboards/ai03/lunar/config.h index 499176d398..9ee8cbf6f8 100644 --- a/keyboards/ai03/lunar/config.h +++ b/keyboards/ai03/lunar/config.h @@ -117,58 +117,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/ai03/orbit/config.h b/keyboards/ai03/orbit/config.h index 410f63f660..9ad384c8ff 100644 --- a/keyboards/ai03/orbit/config.h +++ b/keyboards/ai03/orbit/config.h @@ -126,54 +126,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/ai03/orbit_x/config.h b/keyboards/ai03/orbit_x/config.h index aafc53728c..7d3e8ef511 100644 --- a/keyboards/ai03/orbit_x/config.h +++ b/keyboards/ai03/orbit_x/config.h @@ -94,59 +94,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/ai03/polaris/config.h b/keyboards/ai03/polaris/config.h index a4d7f945d9..0cd6e6f580 100644 --- a/keyboards/ai03/polaris/config.h +++ b/keyboards/ai03/polaris/config.h @@ -92,59 +92,6 @@ along with this program. If not, see . /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/ai03/quasar/config.h b/keyboards/ai03/quasar/config.h index 0679a45f35..2563125be0 100644 --- a/keyboards/ai03/quasar/config.h +++ b/keyboards/ai03/quasar/config.h @@ -123,59 +123,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/alf/dc60/config.h b/keyboards/alf/dc60/config.h index 0064da01fe..5c37685322 100644 --- a/keyboards/alf/dc60/config.h +++ b/keyboards/alf/dc60/config.h @@ -102,54 +102,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/alf/x11/config.h b/keyboards/alf/x11/config.h index d643cb29aa..437f1e22ba 100644 --- a/keyboards/alf/x11/config.h +++ b/keyboards/alf/x11/config.h @@ -117,59 +117,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/allison/config.h b/keyboards/allison/config.h index 450ec893fb..85cb6ee9f5 100644 --- a/keyboards/allison/config.h +++ b/keyboards/allison/config.h @@ -121,59 +121,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/allison_numpad/config.h b/keyboards/allison_numpad/config.h index 46a9d1d446..581926c24c 100644 --- a/keyboards/allison_numpad/config.h +++ b/keyboards/allison_numpad/config.h @@ -121,59 +121,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/angel17/alpha/config.h b/keyboards/angel17/alpha/config.h index 3a24553277..35e9c132b8 100644 --- a/keyboards/angel17/alpha/config.h +++ b/keyboards/angel17/alpha/config.h @@ -121,59 +121,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/angel17/rev1/config.h b/keyboards/angel17/rev1/config.h index 2d5baa81db..a43208d2b9 100644 --- a/keyboards/angel17/rev1/config.h +++ b/keyboards/angel17/rev1/config.h @@ -116,59 +116,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/angel64/alpha/config.h b/keyboards/angel64/alpha/config.h index bb6820729b..b3270fdd8b 100644 --- a/keyboards/angel64/alpha/config.h +++ b/keyboards/angel64/alpha/config.h @@ -114,59 +114,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/angel64/rev1/config.h b/keyboards/angel64/rev1/config.h index bb6820729b..b3270fdd8b 100644 --- a/keyboards/angel64/rev1/config.h +++ b/keyboards/angel64/rev1/config.h @@ -114,59 +114,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/ares/config.h b/keyboards/ares/config.h index 652b71e463..53a3bfe13a 100644 --- a/keyboards/ares/config.h +++ b/keyboards/ares/config.h @@ -44,10 +44,6 @@ along with this program. If not, see . #define RGBLIGHT_ANIMATIONS -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - /* Bootmagic Lite key configuration */ #define BOOTMAGIC_LITE_ROW 4 #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/arisu/config.h b/keyboards/arisu/config.h index 227b714191..8cadc50741 100644 --- a/keyboards/arisu/config.h +++ b/keyboards/arisu/config.h @@ -112,59 +112,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/ash1800/config.h b/keyboards/ash1800/config.h index b1f5182b0f..051db87a79 100644 --- a/keyboards/ash1800/config.h +++ b/keyboards/ash1800/config.h @@ -125,59 +125,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/ashpil/modelm_usbc/config.h b/keyboards/ashpil/modelm_usbc/config.h index 4738124ee7..f383a30714 100644 --- a/keyboards/ashpil/modelm_usbc/config.h +++ b/keyboards/ashpil/modelm_usbc/config.h @@ -51,59 +51,6 @@ along with this program. If not, see . #define DEBOUNCE 5 -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -124,4 +71,4 @@ along with this program. If not, see . /* Bootmagic Lite key configuration */ #define BOOTMAGIC_LITE_ROW 0 -#define BOOTMAGIC_LITE_COLUMN 2 \ No newline at end of file +#define BOOTMAGIC_LITE_COLUMN 2 diff --git a/keyboards/atxkb/1894/config.h b/keyboards/atxkb/1894/config.h index ce2b87ed61..c59efe91a7 100644 --- a/keyboards/atxkb/1894/config.h +++ b/keyboards/atxkb/1894/config.h @@ -92,59 +92,6 @@ along with this program. If not, see . /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/baguette/config.h b/keyboards/baguette/config.h index 153260947c..9a6b08ed9e 100644 --- a/keyboards/baguette/config.h +++ b/keyboards/baguette/config.h @@ -99,54 +99,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/bakeneko80/config.h b/keyboards/bakeneko80/config.h index 8daafeeca8..da330c395f 100644 --- a/keyboards/bakeneko80/config.h +++ b/keyboards/bakeneko80/config.h @@ -121,59 +121,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/bat43/config.h b/keyboards/bat43/config.h index 08eac76612..19b485fd16 100644 --- a/keyboards/bat43/config.h +++ b/keyboards/bat43/config.h @@ -121,59 +121,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/blockey/config.h b/keyboards/blockey/config.h index c79c583982..61a7b96c24 100644 --- a/keyboards/blockey/config.h +++ b/keyboards/blockey/config.h @@ -96,54 +96,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/boardsource/3x4/config.h b/keyboards/boardsource/3x4/config.h index a07968a447..01d163ca50 100644 --- a/keyboards/boardsource/3x4/config.h +++ b/keyboards/boardsource/3x4/config.h @@ -53,54 +53,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/boardsource/4x12/config.h b/keyboards/boardsource/4x12/config.h index 2ba19356db..967bb1c9f0 100644 --- a/keyboards/boardsource/4x12/config.h +++ b/keyboards/boardsource/4x12/config.h @@ -51,54 +51,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/boardsource/5x12/config.h b/keyboards/boardsource/5x12/config.h index 80ac300723..455965a09e 100644 --- a/keyboards/boardsource/5x12/config.h +++ b/keyboards/boardsource/5x12/config.h @@ -52,54 +52,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/bpiphany/frosty_flake/config.h b/keyboards/bpiphany/frosty_flake/config.h index ae19184a6a..bcd34b022c 100644 --- a/keyboards/bpiphany/frosty_flake/config.h +++ b/keyboards/bpiphany/frosty_flake/config.h @@ -77,54 +77,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/bpiphany/kitten_paw/config.h b/keyboards/bpiphany/kitten_paw/config.h index 5e1429c8d5..5aebe080ef 100644 --- a/keyboards/bpiphany/kitten_paw/config.h +++ b/keyboards/bpiphany/kitten_paw/config.h @@ -91,54 +91,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/bpiphany/sixshooter/config.h b/keyboards/bpiphany/sixshooter/config.h index 0637e8d6bc..9e7a1803af 100644 --- a/keyboards/bpiphany/sixshooter/config.h +++ b/keyboards/bpiphany/sixshooter/config.h @@ -44,54 +44,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/bpiphany/tiger_lily/config.h b/keyboards/bpiphany/tiger_lily/config.h index d3e2464bee..bedbd9ea74 100644 --- a/keyboards/bpiphany/tiger_lily/config.h +++ b/keyboards/bpiphany/tiger_lily/config.h @@ -82,54 +82,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/bpiphany/unloved_bastard/config.h b/keyboards/bpiphany/unloved_bastard/config.h index 61a86d723e..ab8f178a9d 100644 --- a/keyboards/bpiphany/unloved_bastard/config.h +++ b/keyboards/bpiphany/unloved_bastard/config.h @@ -75,54 +75,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/bthlabs/geekpad/config.h b/keyboards/bthlabs/geekpad/config.h index 411930a245..7994a9cab5 100644 --- a/keyboards/bthlabs/geekpad/config.h +++ b/keyboards/bthlabs/geekpad/config.h @@ -99,54 +99,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/business_card/alpha/config.h b/keyboards/business_card/alpha/config.h index 239a6c8cc4..81bb16161f 100644 --- a/keyboards/business_card/alpha/config.h +++ b/keyboards/business_card/alpha/config.h @@ -115,59 +115,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/business_card/beta/config.h b/keyboards/business_card/beta/config.h index e4b0ead7f6..9e4e8da963 100644 --- a/keyboards/business_card/beta/config.h +++ b/keyboards/business_card/beta/config.h @@ -115,59 +115,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/c39/config.h b/keyboards/c39/config.h index fb7172c57e..409023f1fa 100755 --- a/keyboards/c39/config.h +++ b/keyboards/c39/config.h @@ -57,18 +57,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/chidori/config.h b/keyboards/chidori/config.h index 9d8bc3e26a..2db5d57ef7 100644 --- a/keyboards/chidori/config.h +++ b/keyboards/chidori/config.h @@ -141,43 +141,6 @@ along with this program. If not, see . /* defined by default; to change, uncomment and set to the combination you want */ #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_LCTL))) -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/chili/config.h b/keyboards/chili/config.h index b9eff3c48a..13bd700363 100644 --- a/keyboards/chili/config.h +++ b/keyboards/chili/config.h @@ -93,54 +93,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/choc_taro/config.h b/keyboards/choc_taro/config.h index 3b1ad493a1..2852206b14 100644 --- a/keyboards/choc_taro/config.h +++ b/keyboards/choc_taro/config.h @@ -118,59 +118,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/ckeys/handwire_101/config.h b/keyboards/ckeys/handwire_101/config.h index 11ec21e2f3..42e26be869 100755 --- a/keyboards/ckeys/handwire_101/config.h +++ b/keyboards/ckeys/handwire_101/config.h @@ -85,54 +85,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - // Audio Click //#define AUDIO_CLICKY diff --git a/keyboards/ckeys/nakey/config.h b/keyboards/ckeys/nakey/config.h index 54775de72f..728eb8f132 100644 --- a/keyboards/ckeys/nakey/config.h +++ b/keyboards/ckeys/nakey/config.h @@ -91,54 +91,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/ckeys/obelus/config.h b/keyboards/ckeys/obelus/config.h index 25bc1db03c..45bbd27ecc 100644 --- a/keyboards/ckeys/obelus/config.h +++ b/keyboards/ckeys/obelus/config.h @@ -86,54 +86,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/ckeys/thedora/config.h b/keyboards/ckeys/thedora/config.h index cd09be3f76..bfc3141731 100755 --- a/keyboards/ckeys/thedora/config.h +++ b/keyboards/ckeys/thedora/config.h @@ -83,54 +83,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - // Audio Click // Music Mode Polyphony diff --git a/keyboards/ckeys/washington/config.h b/keyboards/ckeys/washington/config.h index 5b28b8d8b0..0b7da2782e 100644 --- a/keyboards/ckeys/washington/config.h +++ b/keyboards/ckeys/washington/config.h @@ -122,59 +122,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/coarse/vinta/config.h b/keyboards/coarse/vinta/config.h index 5aaa3089d4..d08994ae67 100644 --- a/keyboards/coarse/vinta/config.h +++ b/keyboards/coarse/vinta/config.h @@ -50,15 +50,3 @@ * */ //#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ diff --git a/keyboards/converter/modelm101/config.h b/keyboards/converter/modelm101/config.h index 7dcb825492..802d53ffdf 100644 --- a/keyboards/converter/modelm101/config.h +++ b/keyboards/converter/modelm101/config.h @@ -50,59 +50,6 @@ along with this program. If not, see . /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed (5 is default) */ #define DEBOUNCE 5 -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/copenhagen_click/click_pad_v1/config.h b/keyboards/copenhagen_click/click_pad_v1/config.h index 95d56bb668..08a9777b51 100755 --- a/keyboards/copenhagen_click/click_pad_v1/config.h +++ b/keyboards/copenhagen_click/click_pad_v1/config.h @@ -123,59 +123,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/coseyfannitutti/discipad/config.h b/keyboards/coseyfannitutti/discipad/config.h index 056239a09b..33ce2576f8 100644 --- a/keyboards/coseyfannitutti/discipad/config.h +++ b/keyboards/coseyfannitutti/discipad/config.h @@ -120,59 +120,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/coseyfannitutti/discipline/config.h b/keyboards/coseyfannitutti/discipline/config.h index 3efe9a5c34..70bc4536f3 100644 --- a/keyboards/coseyfannitutti/discipline/config.h +++ b/keyboards/coseyfannitutti/discipline/config.h @@ -118,59 +118,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/coseyfannitutti/mysterium/config.h b/keyboards/coseyfannitutti/mysterium/config.h index 4e23392eec..0b2df0a051 100644 --- a/keyboards/coseyfannitutti/mysterium/config.h +++ b/keyboards/coseyfannitutti/mysterium/config.h @@ -116,59 +116,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/coseyfannitutti/romeo/config.h b/keyboards/coseyfannitutti/romeo/config.h index f87b9ea6d1..93cda95d20 100644 --- a/keyboards/coseyfannitutti/romeo/config.h +++ b/keyboards/coseyfannitutti/romeo/config.h @@ -119,59 +119,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/craftwalk/config.h b/keyboards/craftwalk/config.h index d7f9f8a309..484a2e13aa 100644 --- a/keyboards/craftwalk/config.h +++ b/keyboards/craftwalk/config.h @@ -121,59 +121,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/cu24/config.h b/keyboards/cu24/config.h index 7d1bae6041..78dcabb0c8 100644 --- a/keyboards/cu24/config.h +++ b/keyboards/cu24/config.h @@ -94,54 +94,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/cu75/config.h b/keyboards/cu75/config.h index 232a3a8ebb..a45cc654f6 100644 --- a/keyboards/cu75/config.h +++ b/keyboards/cu75/config.h @@ -76,54 +76,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/cutie_club/wraith/config.h b/keyboards/cutie_club/wraith/config.h index ffac217431..685aed81d6 100644 --- a/keyboards/cutie_club/wraith/config.h +++ b/keyboards/cutie_club/wraith/config.h @@ -119,59 +119,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/delikeeb/flatbread60/config.h b/keyboards/delikeeb/flatbread60/config.h index 6c40d46bff..5d63a8f5fc 100644 --- a/keyboards/delikeeb/flatbread60/config.h +++ b/keyboards/delikeeb/flatbread60/config.h @@ -101,59 +101,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/delikeeb/vaneela/config.h b/keyboards/delikeeb/vaneela/config.h index b8f031d7c8..4feaf44a72 100644 --- a/keyboards/delikeeb/vaneela/config.h +++ b/keyboards/delikeeb/vaneela/config.h @@ -85,59 +85,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/delikeeb/vaneelaex/config.h b/keyboards/delikeeb/vaneelaex/config.h index 0b96918cbf..4eb6303838 100644 --- a/keyboards/delikeeb/vaneelaex/config.h +++ b/keyboards/delikeeb/vaneelaex/config.h @@ -84,59 +84,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/diverge3/config.h b/keyboards/diverge3/config.h index 5df77b42cd..45dedfe621 100644 --- a/keyboards/diverge3/config.h +++ b/keyboards/diverge3/config.h @@ -95,54 +95,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/dm9records/plaid/config.h b/keyboards/dm9records/plaid/config.h index bbe974e3f6..86ff5be356 100644 --- a/keyboards/dm9records/plaid/config.h +++ b/keyboards/dm9records/plaid/config.h @@ -120,59 +120,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/dm9records/tartan/config.h b/keyboards/dm9records/tartan/config.h index 544ab4a64f..7ad97ea453 100644 --- a/keyboards/dm9records/tartan/config.h +++ b/keyboards/dm9records/tartan/config.h @@ -118,59 +118,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/doppelganger/config.h b/keyboards/doppelganger/config.h index 6e1fa957e3..d063cee5bc 100644 --- a/keyboards/doppelganger/config.h +++ b/keyboards/doppelganger/config.h @@ -129,59 +129,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/dozen0/config.h b/keyboards/dozen0/config.h index ab60fe2d13..48d847bde1 100644 --- a/keyboards/dozen0/config.h +++ b/keyboards/dozen0/config.h @@ -99,54 +99,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/duck/jetfire/config.h b/keyboards/duck/jetfire/config.h index 593f064bd4..3b6c7d89fd 100644 --- a/keyboards/duck/jetfire/config.h +++ b/keyboards/duck/jetfire/config.h @@ -77,54 +77,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -142,4 +94,3 @@ along with this program. If not, see . //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION - diff --git a/keyboards/eniigmakeyboards/ek65/config.h b/keyboards/eniigmakeyboards/ek65/config.h index e1b86dfa1d..bd8f59ef1b 100644 --- a/keyboards/eniigmakeyboards/ek65/config.h +++ b/keyboards/eniigmakeyboards/ek65/config.h @@ -121,59 +121,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/eniigmakeyboards/ek87/config.h b/keyboards/eniigmakeyboards/ek87/config.h index 52a30917e1..fdde69cef3 100644 --- a/keyboards/eniigmakeyboards/ek87/config.h +++ b/keyboards/eniigmakeyboards/ek87/config.h @@ -121,59 +121,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/ep/96/config.h b/keyboards/ep/96/config.h index 7c63e38d14..83ddb873de 100644 --- a/keyboards/ep/96/config.h +++ b/keyboards/ep/96/config.h @@ -86,54 +86,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -151,4 +103,3 @@ along with this program. If not, see . //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION - diff --git a/keyboards/ep/comsn/mollydooker/config.h b/keyboards/ep/comsn/mollydooker/config.h index 97481783ec..ec4f47f870 100644 --- a/keyboards/ep/comsn/mollydooker/config.h +++ b/keyboards/ep/comsn/mollydooker/config.h @@ -95,54 +95,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -160,4 +112,3 @@ along with this program. If not, see . //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION - diff --git a/keyboards/ergosaurus/config.h b/keyboards/ergosaurus/config.h index fd85e87903..e4981e0013 100644 --- a/keyboards/ergosaurus/config.h +++ b/keyboards/ergosaurus/config.h @@ -123,59 +123,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/ericrlau/numdiscipline/rev1/config.h b/keyboards/ericrlau/numdiscipline/rev1/config.h index ea4c16b8bf..82035518a6 100644 --- a/keyboards/ericrlau/numdiscipline/rev1/config.h +++ b/keyboards/ericrlau/numdiscipline/rev1/config.h @@ -120,59 +120,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/evyd13/eon40/config.h b/keyboards/evyd13/eon40/config.h index eb65f6bcf6..8f39d0532e 100644 --- a/keyboards/evyd13/eon40/config.h +++ b/keyboards/evyd13/eon40/config.h @@ -123,59 +123,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/evyd13/eon65/config.h b/keyboards/evyd13/eon65/config.h index eb6273e46b..7d4e80d5bb 100644 --- a/keyboards/evyd13/eon65/config.h +++ b/keyboards/evyd13/eon65/config.h @@ -120,59 +120,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/evyd13/eon75/config.h b/keyboards/evyd13/eon75/config.h index d72e3f2b28..da2775fd40 100644 --- a/keyboards/evyd13/eon75/config.h +++ b/keyboards/evyd13/eon75/config.h @@ -125,59 +125,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -199,4 +146,3 @@ /* Bootmagic Lite key configuration */ // #define BOOTMAGIC_LITE_ROW 0 // #define BOOTMAGIC_LITE_COLUMN 0 - diff --git a/keyboards/evyd13/eon87/config.h b/keyboards/evyd13/eon87/config.h index c09a1365ea..18a21bac27 100644 --- a/keyboards/evyd13/eon87/config.h +++ b/keyboards/evyd13/eon87/config.h @@ -120,59 +120,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/evyd13/eon95/config.h b/keyboards/evyd13/eon95/config.h index bcb2b9c5e4..48de3f3782 100644 --- a/keyboards/evyd13/eon95/config.h +++ b/keyboards/evyd13/eon95/config.h @@ -125,59 +125,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/evyd13/minitomic/config.h b/keyboards/evyd13/minitomic/config.h index 1408625444..ad31fd0aec 100644 --- a/keyboards/evyd13/minitomic/config.h +++ b/keyboards/evyd13/minitomic/config.h @@ -123,59 +123,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/evyd13/mx5160/config.h b/keyboards/evyd13/mx5160/config.h index 13abd36683..5cce240a87 100644 --- a/keyboards/evyd13/mx5160/config.h +++ b/keyboards/evyd13/mx5160/config.h @@ -129,59 +129,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/evyd13/nt660/config.h b/keyboards/evyd13/nt660/config.h index f43e6443d7..225f2ccf2d 100644 --- a/keyboards/evyd13/nt660/config.h +++ b/keyboards/evyd13/nt660/config.h @@ -124,59 +124,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/evyd13/omrontkl/config.h b/keyboards/evyd13/omrontkl/config.h index ce35f8e08d..d61b338e97 100644 --- a/keyboards/evyd13/omrontkl/config.h +++ b/keyboards/evyd13/omrontkl/config.h @@ -120,59 +120,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/evyd13/pockettype/config.h b/keyboards/evyd13/pockettype/config.h index 681672c6af..fa45630c1a 100644 --- a/keyboards/evyd13/pockettype/config.h +++ b/keyboards/evyd13/pockettype/config.h @@ -120,59 +120,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/evyd13/wasdat/config.h b/keyboards/evyd13/wasdat/config.h index 83866890fb..36bbd30821 100644 --- a/keyboards/evyd13/wasdat/config.h +++ b/keyboards/evyd13/wasdat/config.h @@ -133,59 +133,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/evyd13/wasdat_code/config.h b/keyboards/evyd13/wasdat_code/config.h index 07c18c3bab..6c39403e52 100644 --- a/keyboards/evyd13/wasdat_code/config.h +++ b/keyboards/evyd13/wasdat_code/config.h @@ -133,59 +133,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/exclusive/e7v1se/config.h b/keyboards/exclusive/e7v1se/config.h index 4d892946dc..1bb0eb3acf 100644 --- a/keyboards/exclusive/e7v1se/config.h +++ b/keyboards/exclusive/e7v1se/config.h @@ -121,59 +121,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/exclusive/e85/config.h b/keyboards/exclusive/e85/config.h index dfe392d7b7..cc4fcd97d0 100644 --- a/keyboards/exclusive/e85/config.h +++ b/keyboards/exclusive/e85/config.h @@ -105,59 +105,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/felix/config.h b/keyboards/felix/config.h index 349359b32a..73f9d1fa86 100644 --- a/keyboards/felix/config.h +++ b/keyboards/felix/config.h @@ -104,59 +104,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/flehrad/downbubble/config.h b/keyboards/flehrad/downbubble/config.h index f1af41e5fc..b8d69244eb 100644 --- a/keyboards/flehrad/downbubble/config.h +++ b/keyboards/flehrad/downbubble/config.h @@ -117,54 +117,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/fleuron/config.h b/keyboards/fleuron/config.h index d6c802648a..21500d0e9e 100644 --- a/keyboards/fleuron/config.h +++ b/keyboards/fleuron/config.h @@ -91,54 +91,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/fluorite/config.h b/keyboards/fluorite/config.h index 5dea11e1b4..9be3008684 100644 --- a/keyboards/fluorite/config.h +++ b/keyboards/fluorite/config.h @@ -117,58 +117,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/for_science/config.h b/keyboards/for_science/config.h index 8c9c49d164..7428e5a564 100644 --- a/keyboards/for_science/config.h +++ b/keyboards/for_science/config.h @@ -55,10 +55,6 @@ along with this program. If not, see . //#define MASTER_RIGHT -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/foxlab/key65/hotswap/config.h b/keyboards/foxlab/key65/hotswap/config.h index 43f883fce9..621c640720 100644 --- a/keyboards/foxlab/key65/hotswap/config.h +++ b/keyboards/foxlab/key65/hotswap/config.h @@ -100,59 +100,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/foxlab/key65/universal/config.h b/keyboards/foxlab/key65/universal/config.h index 315af66762..241d2ce2cb 100644 --- a/keyboards/foxlab/key65/universal/config.h +++ b/keyboards/foxlab/key65/universal/config.h @@ -100,59 +100,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/foxlab/leaf60/hotswap/config.h b/keyboards/foxlab/leaf60/hotswap/config.h index 5cc751a692..6092a24f01 100644 --- a/keyboards/foxlab/leaf60/hotswap/config.h +++ b/keyboards/foxlab/leaf60/hotswap/config.h @@ -104,59 +104,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/foxlab/leaf60/universal/config.h b/keyboards/foxlab/leaf60/universal/config.h index 7a2574e6bc..b4214882bc 100644 --- a/keyboards/foxlab/leaf60/universal/config.h +++ b/keyboards/foxlab/leaf60/universal/config.h @@ -104,59 +104,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/ft/mars80/config.h b/keyboards/ft/mars80/config.h index e56d4439b3..1670044315 100644 --- a/keyboards/ft/mars80/config.h +++ b/keyboards/ft/mars80/config.h @@ -44,7 +44,3 @@ along with this program. If not, see . #define BACKLIGHT_LEVELS 3 #define RGBLIGHT_ANIMATIONS - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) diff --git a/keyboards/gh60/revc/config.h b/keyboards/gh60/revc/config.h index 6628d78f62..4483473a62 100644 --- a/keyboards/gh60/revc/config.h +++ b/keyboards/gh60/revc/config.h @@ -88,54 +88,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/ghs/rar/config.h b/keyboards/ghs/rar/config.h index 164b290685..10755f99c2 100644 --- a/keyboards/ghs/rar/config.h +++ b/keyboards/ghs/rar/config.h @@ -94,59 +94,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/gingham/config.h b/keyboards/gingham/config.h index 009e23bec5..62f25b06c9 100644 --- a/keyboards/gingham/config.h +++ b/keyboards/gingham/config.h @@ -118,59 +118,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/gray_studio/space65/config.h b/keyboards/gray_studio/space65/config.h index 12ca563c94..6091515b52 100644 --- a/keyboards/gray_studio/space65/config.h +++ b/keyboards/gray_studio/space65/config.h @@ -115,58 +115,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/halberd/config.h b/keyboards/halberd/config.h index f56b99d2c4..66777a2509 100644 --- a/keyboards/halberd/config.h +++ b/keyboards/halberd/config.h @@ -98,54 +98,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/2x5keypad/config.h b/keyboards/handwired/2x5keypad/config.h index f7259607c7..174fb736a2 100644 --- a/keyboards/handwired/2x5keypad/config.h +++ b/keyboards/handwired/2x5keypad/config.h @@ -39,13 +39,6 @@ /* Tap dancing params */ #define TAPPING_TERM 250 -/* key combination for command */ -/* DISABLED -#define IS_COMMAND() ( \ - get_mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ -) -*/ - #ifdef RGB_DI_PIN #define RGBLIGHT_ANIMATIONS #define RGBLED_NUM 0 diff --git a/keyboards/handwired/412_64/config.h b/keyboards/handwired/412_64/config.h index e0336d966f..6cc094d6d5 100644 --- a/keyboards/handwired/412_64/config.h +++ b/keyboards/handwired/412_64/config.h @@ -75,54 +75,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/aranck/config.h b/keyboards/handwired/aranck/config.h index 625df566fe..75f5232f90 100644 --- a/keyboards/handwired/aranck/config.h +++ b/keyboards/handwired/aranck/config.h @@ -134,59 +134,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/arrow_pad/config.h b/keyboards/handwired/arrow_pad/config.h index 22d0f405d4..b23c5db8f0 100644 --- a/keyboards/handwired/arrow_pad/config.h +++ b/keyboards/handwired/arrow_pad/config.h @@ -85,54 +85,6 @@ along with this program. If not, see . */ #define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/atreus50/config.h b/keyboards/handwired/atreus50/config.h index 978088b03d..062892347c 100644 --- a/keyboards/handwired/atreus50/config.h +++ b/keyboards/handwired/atreus50/config.h @@ -85,54 +85,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/cmd60/config.h b/keyboards/handwired/cmd60/config.h index 8cc26c34dd..80f37055f2 100644 --- a/keyboards/handwired/cmd60/config.h +++ b/keyboards/handwired/cmd60/config.h @@ -86,54 +86,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/co60/rev1/config.h b/keyboards/handwired/co60/rev1/config.h index 281a10570f..42524994ae 100644 --- a/keyboards/handwired/co60/rev1/config.h +++ b/keyboards/handwired/co60/rev1/config.h @@ -93,54 +93,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/dactyl_left/config.h b/keyboards/handwired/dactyl_left/config.h index 4b5f1307f5..1e4d279178 100644 --- a/keyboards/handwired/dactyl_left/config.h +++ b/keyboards/handwired/dactyl_left/config.h @@ -123,59 +123,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/fc200rt_qmk/config.h b/keyboards/handwired/fc200rt_qmk/config.h index 098daf97ad..4f10da75eb 100644 --- a/keyboards/handwired/fc200rt_qmk/config.h +++ b/keyboards/handwired/fc200rt_qmk/config.h @@ -74,59 +74,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* disable these deprecated features by default */ #define NO_ACTION_MACRO #define NO_ACTION_FUNCTION diff --git a/keyboards/handwired/fivethirteen/config.h b/keyboards/handwired/fivethirteen/config.h index 86ce250e72..fc7c3a7e7a 100644 --- a/keyboards/handwired/fivethirteen/config.h +++ b/keyboards/handwired/fivethirteen/config.h @@ -86,54 +86,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/floorboard/config.h b/keyboards/handwired/floorboard/config.h index d536753032..7bac3cd2dc 100644 --- a/keyboards/handwired/floorboard/config.h +++ b/keyboards/handwired/floorboard/config.h @@ -121,59 +121,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/gamenum/config.h b/keyboards/handwired/gamenum/config.h index 4a62732a78..13a14c7cf8 100644 --- a/keyboards/handwired/gamenum/config.h +++ b/keyboards/handwired/gamenum/config.h @@ -86,54 +86,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/hacked_motospeed/config.h b/keyboards/handwired/hacked_motospeed/config.h index bfa1e220fd..589b62c01f 100644 --- a/keyboards/handwired/hacked_motospeed/config.h +++ b/keyboards/handwired/hacked_motospeed/config.h @@ -120,59 +120,6 @@ along with this program. If not, see . * */ -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/heisenberg/config.h b/keyboards/handwired/heisenberg/config.h index 006f1e6890..9bf73440c8 100644 --- a/keyboards/handwired/heisenberg/config.h +++ b/keyboards/handwired/heisenberg/config.h @@ -134,59 +134,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/hnah40/config.h b/keyboards/handwired/hnah40/config.h index 9e314812be..6e4493d47f 100644 --- a/keyboards/handwired/hnah40/config.h +++ b/keyboards/handwired/hnah40/config.h @@ -100,56 +100,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - - - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. @@ -167,4 +117,3 @@ along with this program. If not, see . //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION - diff --git a/keyboards/handwired/ibm122m/config.h b/keyboards/handwired/ibm122m/config.h index 903a63e446..c58b8897ed 100644 --- a/keyboards/handwired/ibm122m/config.h +++ b/keyboards/handwired/ibm122m/config.h @@ -90,57 +90,9 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - #define AUDIO_PIN_ALT B6 #define AUDIO_PIN C6 -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/jopr/config.h b/keyboards/handwired/jopr/config.h index 99d98c9be4..7e1da5bbc3 100644 --- a/keyboards/handwired/jopr/config.h +++ b/keyboards/handwired/jopr/config.h @@ -34,7 +34,7 @@ /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) */ + #define NO_ACTION_ONESHOT #define TAPPING_TOGGLE 3 diff --git a/keyboards/handwired/jtallbean/split_65/config.h b/keyboards/handwired/jtallbean/split_65/config.h index 96b9385b43..1620dde024 100644 --- a/keyboards/handwired/jtallbean/split_65/config.h +++ b/keyboards/handwired/jtallbean/split_65/config.h @@ -124,59 +124,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/juliet/config.h b/keyboards/handwired/juliet/config.h index 2a2331b217..bab4fe3333 100644 --- a/keyboards/handwired/juliet/config.h +++ b/keyboards/handwired/juliet/config.h @@ -118,59 +118,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/kbod/config.h b/keyboards/handwired/kbod/config.h index c1a2a0a7c8..b8b40728cd 100644 --- a/keyboards/handwired/kbod/config.h +++ b/keyboards/handwired/kbod/config.h @@ -85,54 +85,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/magicforce61/config.h b/keyboards/handwired/magicforce61/config.h index 92d4fbecb8..193d85d2f3 100644 --- a/keyboards/handwired/magicforce61/config.h +++ b/keyboards/handwired/magicforce61/config.h @@ -85,54 +85,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/magicforce68/config.h b/keyboards/handwired/magicforce68/config.h index 430e294ba8..9df39f4406 100644 --- a/keyboards/handwired/magicforce68/config.h +++ b/keyboards/handwired/magicforce68/config.h @@ -86,54 +86,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/mechboards_micropad/config.h b/keyboards/handwired/mechboards_micropad/config.h index fbeb07ab61..3eec736aea 100644 --- a/keyboards/handwired/mechboards_micropad/config.h +++ b/keyboards/handwired/mechboards_micropad/config.h @@ -117,59 +117,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/numpad20/config.h b/keyboards/handwired/numpad20/config.h index 7e7ddbeb2a..d94e23b21d 100644 --- a/keyboards/handwired/numpad20/config.h +++ b/keyboards/handwired/numpad20/config.h @@ -86,54 +86,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/ortho5x13/config.h b/keyboards/handwired/ortho5x13/config.h index 65510c2a23..bab42593d0 100644 --- a/keyboards/handwired/ortho5x13/config.h +++ b/keyboards/handwired/ortho5x13/config.h @@ -86,54 +86,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/owlet60/config.h b/keyboards/handwired/owlet60/config.h index ef1e410d14..d20e1fa975 100644 --- a/keyboards/handwired/owlet60/config.h +++ b/keyboards/handwired/owlet60/config.h @@ -122,59 +122,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/pilcrow/config.h b/keyboards/handwired/pilcrow/config.h index a2eaaaefaf..735a52f61b 100644 --- a/keyboards/handwired/pilcrow/config.h +++ b/keyboards/handwired/pilcrow/config.h @@ -86,54 +86,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/promethium/config.h b/keyboards/handwired/promethium/config.h index 48eb39f72d..b146767d65 100644 --- a/keyboards/handwired/promethium/config.h +++ b/keyboards/handwired/promethium/config.h @@ -92,44 +92,21 @@ along with this program. If not, see . */ //#define FORCE_NKRO +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + /* key combination for command */ #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT) | MOD_BIT(KC_LCTRL) | MOD_BIT(KC_RCTRL))) -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z /* * Feature disable options diff --git a/keyboards/handwired/reddot/config.h b/keyboards/handwired/reddot/config.h index 912cc6fc5f..95dcde3261 100755 --- a/keyboards/handwired/reddot/config.h +++ b/keyboards/handwired/reddot/config.h @@ -84,54 +84,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/retro_refit/config.h b/keyboards/handwired/retro_refit/config.h index 9c36a19d5c..089e56bb01 100644 --- a/keyboards/handwired/retro_refit/config.h +++ b/keyboards/handwired/retro_refit/config.h @@ -57,43 +57,19 @@ along with this program. If not, see . #define FORCE_NKRO /* - * Magic key options - * These options allow the magic key functionality to be changed. This is useful - * if your keyboard/keypad is missing keys and you want magic key support. + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * */ -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - /* remap magic keys */ -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE #define MAGIC_KEY_LOCK BSLS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z /* * Feature disable options diff --git a/keyboards/handwired/sick68/config.h b/keyboards/handwired/sick68/config.h index ea7466d23c..65583af18d 100644 --- a/keyboards/handwired/sick68/config.h +++ b/keyboards/handwired/sick68/config.h @@ -123,59 +123,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/sticc14/config.h b/keyboards/handwired/sticc14/config.h index fbe420b576..6c296d7893 100644 --- a/keyboards/handwired/sticc14/config.h +++ b/keyboards/handwired/sticc14/config.h @@ -121,59 +121,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/tennie/config.h b/keyboards/handwired/tennie/config.h index b1bddac45b..6955f08db7 100644 --- a/keyboards/handwired/tennie/config.h +++ b/keyboards/handwired/tennie/config.h @@ -117,54 +117,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/terminus_mini/config.h b/keyboards/handwired/terminus_mini/config.h index c31cf70594..e3b0c41999 100644 --- a/keyboards/handwired/terminus_mini/config.h +++ b/keyboards/handwired/terminus_mini/config.h @@ -92,54 +92,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/handwired/twadlee/tp69/config.h b/keyboards/handwired/twadlee/tp69/config.h index 27c48fb947..aac4c874b2 100644 --- a/keyboards/handwired/twadlee/tp69/config.h +++ b/keyboards/handwired/twadlee/tp69/config.h @@ -124,59 +124,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/hecomi/alpha/config.h b/keyboards/hecomi/alpha/config.h index 1fd634a3cf..55c5ac50eb 100644 --- a/keyboards/hecomi/alpha/config.h +++ b/keyboards/hecomi/alpha/config.h @@ -116,55 +116,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/helix/rev3_4rows/config.h b/keyboards/helix/rev3_4rows/config.h index aa9e1d6dc5..218ef5e5cc 100644 --- a/keyboards/helix/rev3_4rows/config.h +++ b/keyboards/helix/rev3_4rows/config.h @@ -145,59 +145,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/helix/rev3_5rows/config.h b/keyboards/helix/rev3_5rows/config.h index ebe1e41c83..79c7961ed9 100644 --- a/keyboards/helix/rev3_5rows/config.h +++ b/keyboards/helix/rev3_5rows/config.h @@ -145,59 +145,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/hid_liber/config.h b/keyboards/hid_liber/config.h index 73ed005b7f..1e263649e5 100755 --- a/keyboards/hid_liber/config.h +++ b/keyboards/hid_liber/config.h @@ -74,54 +74,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/hineybush/h75_singa/config.h b/keyboards/hineybush/h75_singa/config.h index f20c07f80a..e1389c8f96 100644 --- a/keyboards/hineybush/h75_singa/config.h +++ b/keyboards/hineybush/h75_singa/config.h @@ -117,59 +117,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/hineybush/physix/config.h b/keyboards/hineybush/physix/config.h index 4c5879b084..c4a0274b93 100644 --- a/keyboards/hineybush/physix/config.h +++ b/keyboards/hineybush/physix/config.h @@ -121,59 +121,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/hineybush/sm68/config.h b/keyboards/hineybush/sm68/config.h index 344def6ebb..fd2403b8b5 100644 --- a/keyboards/hineybush/sm68/config.h +++ b/keyboards/hineybush/sm68/config.h @@ -113,59 +113,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/idb/idb_60/config.h b/keyboards/idb/idb_60/config.h index 6b33038c63..8a0852ccbd 100644 --- a/keyboards/idb/idb_60/config.h +++ b/keyboards/idb/idb_60/config.h @@ -82,54 +82,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/idobo/config.h b/keyboards/idobo/config.h index 7b14613fcf..ffe0bb7011 100644 --- a/keyboards/idobo/config.h +++ b/keyboards/idobo/config.h @@ -99,54 +99,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/illuminati/is0/config.h b/keyboards/illuminati/is0/config.h index 24242a75b4..948ea8282c 100644 --- a/keyboards/illuminati/is0/config.h +++ b/keyboards/illuminati/is0/config.h @@ -123,59 +123,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/j80/config.h b/keyboards/j80/config.h index fb17a7fd1e..10b4116181 100644 --- a/keyboards/j80/config.h +++ b/keyboards/j80/config.h @@ -46,10 +46,6 @@ along with this program. If not, see . #define NO_ACTION_MACRO #define NO_ACTION_FUNCTION -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - /* Bootmagic Lite key configuration */ #define BOOTMAGIC_LITE_ROW 0 #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/jae/j01/config.h b/keyboards/jae/j01/config.h index e2282a37b4..68e8b0ff08 100644 --- a/keyboards/jae/j01/config.h +++ b/keyboards/jae/j01/config.h @@ -94,59 +94,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/kagamidget/config.h b/keyboards/kagamidget/config.h index 4e0c68fa94..2bf5b8d7f8 100644 --- a/keyboards/kagamidget/config.h +++ b/keyboards/kagamidget/config.h @@ -94,54 +94,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/kbdclack/kaishi65/config.h b/keyboards/kbdclack/kaishi65/config.h index 794cd54a94..390ef64981 100644 --- a/keyboards/kbdclack/kaishi65/config.h +++ b/keyboards/kbdclack/kaishi65/config.h @@ -121,59 +121,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/kbdfans/kbd19x/config.h b/keyboards/kbdfans/kbd19x/config.h index d3549b0aaa..0fbf429c45 100644 --- a/keyboards/kbdfans/kbd19x/config.h +++ b/keyboards/kbdfans/kbd19x/config.h @@ -105,54 +105,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/kbdfans/kbd4x/config.h b/keyboards/kbdfans/kbd4x/config.h index 5c655278f4..a75efa6eae 100644 --- a/keyboards/kbdfans/kbd4x/config.h +++ b/keyboards/kbdfans/kbd4x/config.h @@ -100,54 +100,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/kbdfans/kbd66/config.h b/keyboards/kbdfans/kbd66/config.h index 15a3b4b818..2098ebf60f 100644 --- a/keyboards/kbdfans/kbd66/config.h +++ b/keyboards/kbdfans/kbd66/config.h @@ -91,54 +91,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/kbdfans/kbd67/hotswap/config.h b/keyboards/kbdfans/kbd67/hotswap/config.h index 3bee63332d..2179acb5f8 100644 --- a/keyboards/kbdfans/kbd67/hotswap/config.h +++ b/keyboards/kbdfans/kbd67/hotswap/config.h @@ -119,54 +119,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/kbdfans/kbd67/rev1/config.h b/keyboards/kbdfans/kbd67/rev1/config.h index b8aad647c4..04ea9c9f1b 100644 --- a/keyboards/kbdfans/kbd67/rev1/config.h +++ b/keyboards/kbdfans/kbd67/rev1/config.h @@ -116,54 +116,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/kbdfans/kbd6x/config.h b/keyboards/kbdfans/kbd6x/config.h index d9758edb8c..332898383e 100644 --- a/keyboards/kbdfans/kbd6x/config.h +++ b/keyboards/kbdfans/kbd6x/config.h @@ -103,54 +103,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/kbdfans/kbd8x_mk2/config.h b/keyboards/kbdfans/kbd8x_mk2/config.h index a8ead3fd17..ea535b00fd 100644 --- a/keyboards/kbdfans/kbd8x_mk2/config.h +++ b/keyboards/kbdfans/kbd8x_mk2/config.h @@ -123,59 +123,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/kbdfans/kbdpad_mk2/config.h b/keyboards/kbdfans/kbdpad_mk2/config.h index e99a73696a..e64aaa3379 100644 --- a/keyboards/kbdfans/kbdpad_mk2/config.h +++ b/keyboards/kbdfans/kbdpad_mk2/config.h @@ -122,59 +122,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/kc60se/config.h b/keyboards/kc60se/config.h index ec07587941..fc75f68ff0 100644 --- a/keyboards/kc60se/config.h +++ b/keyboards/kc60se/config.h @@ -81,54 +81,6 @@ along with this program. If not, see . */ // #define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/keebio/choconum/config.h b/keyboards/keebio/choconum/config.h index 15b3eecbe3..45dca64585 100644 --- a/keyboards/keebio/choconum/config.h +++ b/keyboards/keebio/choconum/config.h @@ -76,59 +76,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/keebio/ergodicity/config.h b/keyboards/keebio/ergodicity/config.h index 0d038a870b..1e6327aec0 100644 --- a/keyboards/keebio/ergodicity/config.h +++ b/keyboards/keebio/ergodicity/config.h @@ -105,59 +105,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/keebwerk/nano_slider/config.h b/keyboards/keebwerk/nano_slider/config.h index d5bf9c3b95..827923fea7 100644 --- a/keyboards/keebwerk/nano_slider/config.h +++ b/keyboards/keebwerk/nano_slider/config.h @@ -90,59 +90,6 @@ along with this program. If not, see . */ // #define GRAVE_ESC_CTRL_OVERRIDE -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/keebzdotnet/wazowski/config.h b/keyboards/keebzdotnet/wazowski/config.h index 3786c4b0ec..71db031cae 100644 --- a/keyboards/keebzdotnet/wazowski/config.h +++ b/keyboards/keebzdotnet/wazowski/config.h @@ -121,59 +121,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/keyhive/maypad/config.h b/keyboards/keyhive/maypad/config.h index 774dd74c9f..bb3ef2d646 100644 --- a/keyboards/keyhive/maypad/config.h +++ b/keyboards/keyhive/maypad/config.h @@ -120,59 +120,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/kinesis/config.h b/keyboards/kinesis/config.h index c5a89d4533..ecedf9bbff 100644 --- a/keyboards/kinesis/config.h +++ b/keyboards/kinesis/config.h @@ -61,54 +61,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/kira75/config.h b/keyboards/kira75/config.h index 408714cb32..db42c36cc3 100644 --- a/keyboards/kira75/config.h +++ b/keyboards/kira75/config.h @@ -98,54 +98,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/kmac/config.h b/keyboards/kmac/config.h index e916b49722..23cf0a0470 100644 --- a/keyboards/kmac/config.h +++ b/keyboards/kmac/config.h @@ -85,54 +85,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/knops/mini/config.h b/keyboards/knops/mini/config.h index cf603fbf6c..28db6ae8d9 100644 --- a/keyboards/knops/mini/config.h +++ b/keyboards/knops/mini/config.h @@ -89,56 +89,6 @@ along with this program. If not, see . * power-up. * */ -//#define FORCE_NKRO - -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/kona_classic/config.h b/keyboards/kona_classic/config.h index e16f3017db..1a99fa1265 100644 --- a/keyboards/kona_classic/config.h +++ b/keyboards/kona_classic/config.h @@ -88,54 +88,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/kprepublic/bm16a/config.h b/keyboards/kprepublic/bm16a/config.h index 16bc83827f..c38f74458e 100644 --- a/keyboards/kprepublic/bm16a/config.h +++ b/keyboards/kprepublic/bm16a/config.h @@ -118,59 +118,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/kprepublic/cospad/config.h b/keyboards/kprepublic/cospad/config.h index a18c2c1b25..47c4a1d9af 100644 --- a/keyboards/kprepublic/cospad/config.h +++ b/keyboards/kprepublic/cospad/config.h @@ -125,59 +125,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/kprepublic/jj40/config.h b/keyboards/kprepublic/jj40/config.h index 0d168f2c01..c42b247d1a 100644 --- a/keyboards/kprepublic/jj40/config.h +++ b/keyboards/kprepublic/jj40/config.h @@ -45,10 +45,6 @@ along with this program. If not, see . #define USB_MAX_POWER_CONSUMPTION 100 -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - /* Bootmagic Lite key configuration */ // #define BOOTMAGIC_LITE_ROW 0 // #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/kprepublic/jj4x4/config.h b/keyboards/kprepublic/jj4x4/config.h index 45c8671cc5..f97dd7f1cb 100644 --- a/keyboards/kprepublic/jj4x4/config.h +++ b/keyboards/kprepublic/jj4x4/config.h @@ -48,10 +48,6 @@ along with this program. If not, see . #define USB_MAX_POWER_CONSUMPTION 100 -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - /* Bootmagic Lite key configuration */ // #define BOOTMAGIC_LITE_ROW 0 // #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/ktec/daisy/config.h b/keyboards/ktec/daisy/config.h index bf5210c0dc..3d504888ec 100644 --- a/keyboards/ktec/daisy/config.h +++ b/keyboards/ktec/daisy/config.h @@ -124,59 +124,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/lfkeyboards/lfk65_hs/config.h b/keyboards/lfkeyboards/lfk65_hs/config.h index 8107d3ccc0..adedaa3427 100644 --- a/keyboards/lfkeyboards/lfk65_hs/config.h +++ b/keyboards/lfkeyboards/lfk65_hs/config.h @@ -66,54 +66,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/lfkeyboards/lfk78/config.h b/keyboards/lfkeyboards/lfk78/config.h index 540c405399..05ead71c86 100644 --- a/keyboards/lfkeyboards/lfk78/config.h +++ b/keyboards/lfkeyboards/lfk78/config.h @@ -87,59 +87,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/lfkeyboards/lfk87/config.h b/keyboards/lfkeyboards/lfk87/config.h index c030590921..d5b17005e5 100644 --- a/keyboards/lfkeyboards/lfk87/config.h +++ b/keyboards/lfkeyboards/lfk87/config.h @@ -97,54 +97,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/lfkeyboards/lfkpad/config.h b/keyboards/lfkeyboards/lfkpad/config.h index e2181a9e68..972b0283b5 100644 --- a/keyboards/lfkeyboards/lfkpad/config.h +++ b/keyboards/lfkeyboards/lfkpad/config.h @@ -104,59 +104,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/lfkeyboards/mini1800/config.h b/keyboards/lfkeyboards/mini1800/config.h index b8c0f2b671..598f08a6f1 100644 --- a/keyboards/lfkeyboards/mini1800/config.h +++ b/keyboards/lfkeyboards/mini1800/config.h @@ -84,54 +84,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/mechkeys/mk60/config.h b/keyboards/mechkeys/mk60/config.h index 9ce8080661..a841152f4f 100644 --- a/keyboards/mechkeys/mk60/config.h +++ b/keyboards/mechkeys/mk60/config.h @@ -120,59 +120,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/mechlovin/hannah910/config.h b/keyboards/mechlovin/hannah910/config.h index b4edaae481..7e0b9dd30c 100644 --- a/keyboards/mechlovin/hannah910/config.h +++ b/keyboards/mechlovin/hannah910/config.h @@ -91,59 +91,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/meira/featherble/config.h b/keyboards/meira/featherble/config.h index b3ee954749..61f90d46a0 100644 --- a/keyboards/meira/featherble/config.h +++ b/keyboards/meira/featherble/config.h @@ -79,54 +79,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/meira/promicro/config.h b/keyboards/meira/promicro/config.h index 53844745b0..4682a4104c 100644 --- a/keyboards/meira/promicro/config.h +++ b/keyboards/meira/promicro/config.h @@ -70,54 +70,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/meishi/config.h b/keyboards/meishi/config.h index a32dd11efc..6664e371a1 100644 --- a/keyboards/meishi/config.h +++ b/keyboards/meishi/config.h @@ -91,54 +91,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/meishi2/config.h b/keyboards/meishi2/config.h index 3a31952aa5..df3203991c 100644 --- a/keyboards/meishi2/config.h +++ b/keyboards/meishi2/config.h @@ -123,59 +123,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/meme/config.h b/keyboards/meme/config.h index e157ade9ad..34624d2b6a 100644 --- a/keyboards/meme/config.h +++ b/keyboards/meme/config.h @@ -91,54 +91,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/meson/config.h b/keyboards/meson/config.h index facadbdab2..e777320487 100644 --- a/keyboards/meson/config.h +++ b/keyboards/meson/config.h @@ -94,59 +94,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/metamechs/timberwolf/config.h b/keyboards/metamechs/timberwolf/config.h index 0a1179d107..353d8073a1 100644 --- a/keyboards/metamechs/timberwolf/config.h +++ b/keyboards/metamechs/timberwolf/config.h @@ -96,58 +96,6 @@ along with this program. If not, see . //#define FORCE_NKRO /* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/miniaxe/config.h b/keyboards/miniaxe/config.h index f9843d4b74..b9295bad9f 100644 --- a/keyboards/miniaxe/config.h +++ b/keyboards/miniaxe/config.h @@ -107,54 +107,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/mint60/config.h b/keyboards/mint60/config.h index a21ffc6486..c38add26e0 100644 --- a/keyboards/mint60/config.h +++ b/keyboards/mint60/config.h @@ -96,53 +96,6 @@ along with this program. If not, see . //#define FORCE_NKRO /* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* ws2812 RGB LED */ #define RGB_DI_PIN D3 diff --git a/keyboards/miuni32/config.h b/keyboards/miuni32/config.h index c2a40cf1ba..35eb14e666 100644 --- a/keyboards/miuni32/config.h +++ b/keyboards/miuni32/config.h @@ -87,53 +87,6 @@ along with this program. If not, see . //#define FORCE_NKRO /* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/mountainblocks/mb17/config.h b/keyboards/mountainblocks/mb17/config.h index c67db7a7d1..aef58dc5da 100644 --- a/keyboards/mountainblocks/mb17/config.h +++ b/keyboards/mountainblocks/mb17/config.h @@ -91,59 +91,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* disable these deprecated features by default */ #define NO_ACTION_MACRO diff --git a/keyboards/mt40/config.h b/keyboards/mt40/config.h index 8e04fe38c4..84e1cb507c 100644 --- a/keyboards/mt40/config.h +++ b/keyboards/mt40/config.h @@ -100,54 +100,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/mxss/config.h b/keyboards/mxss/config.h index b0aef68116..8cb2156942 100644 --- a/keyboards/mxss/config.h +++ b/keyboards/mxss/config.h @@ -88,52 +88,4 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - #endif diff --git a/keyboards/namecard2x4/rev1/config.h b/keyboards/namecard2x4/rev1/config.h index 0ca114a750..d743c0e339 100644 --- a/keyboards/namecard2x4/rev1/config.h +++ b/keyboards/namecard2x4/rev1/config.h @@ -97,54 +97,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/namecard2x4/rev2/config.h b/keyboards/namecard2x4/rev2/config.h index 44b8a712a3..37434d41a0 100644 --- a/keyboards/namecard2x4/rev2/config.h +++ b/keyboards/namecard2x4/rev2/config.h @@ -97,54 +97,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/nightly_boards/n87/config.h b/keyboards/nightly_boards/n87/config.h index 7d81bf7fd8..543399e71a 100644 --- a/keyboards/nightly_boards/n87/config.h +++ b/keyboards/nightly_boards/n87/config.h @@ -127,59 +127,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/nightmare/config.h b/keyboards/nightmare/config.h index 3282c8ae26..14477ee4de 100644 --- a/keyboards/nightmare/config.h +++ b/keyboards/nightmare/config.h @@ -121,59 +121,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/novelpad/config.h b/keyboards/novelpad/config.h index 0b8edcf193..a7947220ff 100755 --- a/keyboards/novelpad/config.h +++ b/keyboards/novelpad/config.h @@ -121,59 +121,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/noxary/220/config.h b/keyboards/noxary/220/config.h index d935d2fe41..522d1beca8 100644 --- a/keyboards/noxary/220/config.h +++ b/keyboards/noxary/220/config.h @@ -94,59 +94,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/noxary/260/config.h b/keyboards/noxary/260/config.h index e6d5e78b47..2a9ac07bdb 100644 --- a/keyboards/noxary/260/config.h +++ b/keyboards/noxary/260/config.h @@ -127,59 +127,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/noxary/268_2/config.h b/keyboards/noxary/268_2/config.h index d7baf3b6a4..c8fbdd3bf4 100644 --- a/keyboards/noxary/268_2/config.h +++ b/keyboards/noxary/268_2/config.h @@ -95,59 +95,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/noxary/280/config.h b/keyboards/noxary/280/config.h index b1b123a633..15de702859 100644 --- a/keyboards/noxary/280/config.h +++ b/keyboards/noxary/280/config.h @@ -94,59 +94,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/noxary/x268/config.h b/keyboards/noxary/x268/config.h index a6da7ef832..5f33c18e81 100644 --- a/keyboards/noxary/x268/config.h +++ b/keyboards/noxary/x268/config.h @@ -102,54 +102,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/otaku_split/rev0/config.h b/keyboards/otaku_split/rev0/config.h index 00e003e3b5..454f4866e6 100644 --- a/keyboards/otaku_split/rev0/config.h +++ b/keyboards/otaku_split/rev0/config.h @@ -123,59 +123,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/otaku_split/rev1/config.h b/keyboards/otaku_split/rev1/config.h index ce9a78db71..7ae6155d8c 100644 --- a/keyboards/otaku_split/rev1/config.h +++ b/keyboards/otaku_split/rev1/config.h @@ -127,59 +127,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/pdxkbc/config.h b/keyboards/pdxkbc/config.h index 2748b6309c..dad0396330 100644 --- a/keyboards/pdxkbc/config.h +++ b/keyboards/pdxkbc/config.h @@ -123,59 +123,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/quad_h/lb75/config.h b/keyboards/quad_h/lb75/config.h index d55432c7a9..e752dfcdd5 100644 --- a/keyboards/quad_h/lb75/config.h +++ b/keyboards/quad_h/lb75/config.h @@ -119,59 +119,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/quantrik/kyuu/config.h b/keyboards/quantrik/kyuu/config.h index 924395ebc6..a2fc756fba 100644 --- a/keyboards/quantrik/kyuu/config.h +++ b/keyboards/quantrik/kyuu/config.h @@ -117,59 +117,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/qwertyydox/config.h b/keyboards/qwertyydox/config.h index cc77cf9c1d..4cd214e222 100644 --- a/keyboards/qwertyydox/config.h +++ b/keyboards/qwertyydox/config.h @@ -122,59 +122,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - #define MOUSEKEY_DELAY 150 #define MOUSEKEY_INTERVAL 20 #define MOUSEKEY_MAX_SPEED 10 diff --git a/keyboards/rabbit/rabbit68/config.h b/keyboards/rabbit/rabbit68/config.h index 449f195144..bae66808ac 100644 --- a/keyboards/rabbit/rabbit68/config.h +++ b/keyboards/rabbit/rabbit68/config.h @@ -117,59 +117,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/ramonimbao/herringbone/v1/config.h b/keyboards/ramonimbao/herringbone/v1/config.h index 2db97cf56f..9944cfbd19 100644 --- a/keyboards/ramonimbao/herringbone/v1/config.h +++ b/keyboards/ramonimbao/herringbone/v1/config.h @@ -120,59 +120,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/redscarf_iiplus/verb/config.h b/keyboards/redscarf_iiplus/verb/config.h index 6f63f73169..c313b90a32 100755 --- a/keyboards/redscarf_iiplus/verb/config.h +++ b/keyboards/redscarf_iiplus/verb/config.h @@ -123,59 +123,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/redscarf_iiplus/verc/config.h b/keyboards/redscarf_iiplus/verc/config.h index 6f63f73169..c313b90a32 100755 --- a/keyboards/redscarf_iiplus/verc/config.h +++ b/keyboards/redscarf_iiplus/verc/config.h @@ -123,59 +123,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/redscarf_iiplus/verd/config.h b/keyboards/redscarf_iiplus/verd/config.h index ca1ac9c265..94b0e88539 100644 --- a/keyboards/redscarf_iiplus/verd/config.h +++ b/keyboards/redscarf_iiplus/verd/config.h @@ -127,59 +127,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/retro_75/config.h b/keyboards/retro_75/config.h index 78c10c3c34..6ab89d7617 100644 --- a/keyboards/retro_75/config.h +++ b/keyboards/retro_75/config.h @@ -121,59 +121,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/reviung34/config.h b/keyboards/reviung34/config.h index 871e89c100..0847678e86 100755 --- a/keyboards/reviung34/config.h +++ b/keyboards/reviung34/config.h @@ -123,59 +123,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/reviung39/config.h b/keyboards/reviung39/config.h index 17cbf67341..098497bc9f 100644 --- a/keyboards/reviung39/config.h +++ b/keyboards/reviung39/config.h @@ -123,59 +123,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/reviung41/config.h b/keyboards/reviung41/config.h index afcf991084..967ca791d5 100644 --- a/keyboards/reviung41/config.h +++ b/keyboards/reviung41/config.h @@ -123,59 +123,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/ryanbaekr/rb86/config.h b/keyboards/ryanbaekr/rb86/config.h index 39955da1de..ec93c2b3c5 100644 --- a/keyboards/ryanbaekr/rb86/config.h +++ b/keyboards/ryanbaekr/rb86/config.h @@ -91,60 +91,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - - /* disable these deprecated features by default */ #define NO_ACTION_MACRO #define NO_ACTION_FUNCTION diff --git a/keyboards/sck/m0116b/config.h b/keyboards/sck/m0116b/config.h index 63b74b902e..b01ea2d2ef 100644 --- a/keyboards/sck/m0116b/config.h +++ b/keyboards/sck/m0116b/config.h @@ -121,59 +121,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/sck/osa/config.h b/keyboards/sck/osa/config.h index 87651f1f89..957652f286 100644 --- a/keyboards/sck/osa/config.h +++ b/keyboards/sck/osa/config.h @@ -127,59 +127,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/scythe/config.h b/keyboards/scythe/config.h index a235f8d31f..ad4d1ded4f 100644 --- a/keyboards/scythe/config.h +++ b/keyboards/scythe/config.h @@ -101,54 +101,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/shiro/config.h b/keyboards/shiro/config.h index 9fbdd44773..52c0f361fd 100644 --- a/keyboards/shiro/config.h +++ b/keyboards/shiro/config.h @@ -123,59 +123,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/silverbullet44/config.h b/keyboards/silverbullet44/config.h index 2bd9c834b9..5b4ae5a110 100644 --- a/keyboards/silverbullet44/config.h +++ b/keyboards/silverbullet44/config.h @@ -164,59 +164,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/sixkeyboard/config.h b/keyboards/sixkeyboard/config.h index b8fcb8d7d1..b438ceea9e 100644 --- a/keyboards/sixkeyboard/config.h +++ b/keyboards/sixkeyboard/config.h @@ -48,45 +48,6 @@ along with this program. If not, see . /* Force NKRO Mode - If forced on, must be disabled via magic key (default = LShift+RShift+N) */ #define FORCE_NKRO -/* - * Magic key options - * These options allow the magic key functionality to be changed. This is useful - * if your keyboard/keypad is missing keys and you want magic key support. - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* remap magic keys */ -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK BSLS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/snampad/config.h b/keyboards/snampad/config.h index 270a36cb0a..8b08f55025 100644 --- a/keyboards/snampad/config.h +++ b/keyboards/snampad/config.h @@ -118,58 +118,6 @@ along with this program. If not, see . //#define FORCE_NKRO /* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/spacetime/config.h b/keyboards/spacetime/config.h index 1219eca2df..3afcee1735 100644 --- a/keyboards/spacetime/config.h +++ b/keyboards/spacetime/config.h @@ -118,58 +118,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/standaside/config.h b/keyboards/standaside/config.h index d6d60fd960..797a463a15 100644 --- a/keyboards/standaside/config.h +++ b/keyboards/standaside/config.h @@ -84,54 +84,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/suihankey/alpha/config.h b/keyboards/suihankey/alpha/config.h index c63592298e..b11478adfc 100644 --- a/keyboards/suihankey/alpha/config.h +++ b/keyboards/suihankey/alpha/config.h @@ -118,59 +118,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/suihankey/rev1/config.h b/keyboards/suihankey/rev1/config.h index ddc8b95d6b..b2801cd862 100644 --- a/keyboards/suihankey/rev1/config.h +++ b/keyboards/suihankey/rev1/config.h @@ -118,59 +118,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/suihankey/split/alpha/config.h b/keyboards/suihankey/split/alpha/config.h index b54744afb4..ae5acdbd4b 100644 --- a/keyboards/suihankey/split/alpha/config.h +++ b/keyboards/suihankey/split/alpha/config.h @@ -118,59 +118,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/suihankey/split/rev1/config.h b/keyboards/suihankey/split/rev1/config.h index f2d8239db1..6b7dd2bac9 100644 --- a/keyboards/suihankey/split/rev1/config.h +++ b/keyboards/suihankey/split/rev1/config.h @@ -118,59 +118,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/switchplate/southpaw_65/config.h b/keyboards/switchplate/southpaw_65/config.h index ee6567b23a..7512e0e2b3 100644 --- a/keyboards/switchplate/southpaw_65/config.h +++ b/keyboards/switchplate/southpaw_65/config.h @@ -112,58 +112,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/switchplate/southpaw_fullsize/config.h b/keyboards/switchplate/southpaw_fullsize/config.h index c319b54ce1..c15cb1d0be 100644 --- a/keyboards/switchplate/southpaw_fullsize/config.h +++ b/keyboards/switchplate/southpaw_fullsize/config.h @@ -62,59 +62,6 @@ along with this program. If not, see . /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/tg4x/config.h b/keyboards/tg4x/config.h index 915ae130ec..87636d8371 100644 --- a/keyboards/tg4x/config.h +++ b/keyboards/tg4x/config.h @@ -123,59 +123,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/tgr/910/config.h b/keyboards/tgr/910/config.h index 7ba412be35..f9a233c1b2 100644 --- a/keyboards/tgr/910/config.h +++ b/keyboards/tgr/910/config.h @@ -47,10 +47,6 @@ along with this program. If not, see . #define RGBLIGHT_ANIMATIONS -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - /* Bootmagic Lite key configuration */ // #define BOOTMAGIC_LITE_ROW 0 // #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/tgr/tris/config.h b/keyboards/tgr/tris/config.h index 16e862a222..131add14cd 100644 --- a/keyboards/tgr/tris/config.h +++ b/keyboards/tgr/tris/config.h @@ -42,10 +42,6 @@ along with this program. If not, see . #define RGBLED_NUM 6 #define RGBLIGHT_ANIMATIONS -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - /* Bootmagic Lite key configuration */ // #define BOOTMAGIC_LITE_ROW 0 // #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/the_ruler/config.h b/keyboards/the_ruler/config.h index 2932dd4651..bcb7441140 100644 --- a/keyboards/the_ruler/config.h +++ b/keyboards/the_ruler/config.h @@ -81,54 +81,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/thedogkeyboard/config.h b/keyboards/thedogkeyboard/config.h index 89698ca3d4..099c157cff 100644 --- a/keyboards/thedogkeyboard/config.h +++ b/keyboards/thedogkeyboard/config.h @@ -118,59 +118,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/thevankeyboards/roadkit/config.h b/keyboards/thevankeyboards/roadkit/config.h index 815dd715b4..edb1bd91c9 100644 --- a/keyboards/thevankeyboards/roadkit/config.h +++ b/keyboards/thevankeyboards/roadkit/config.h @@ -86,54 +86,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/tkc/osav2/config.h b/keyboards/tkc/osav2/config.h index c70fdc9819..5622621e2b 100644 --- a/keyboards/tkc/osav2/config.h +++ b/keyboards/tkc/osav2/config.h @@ -123,59 +123,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/tkc/tkc1800/config.h b/keyboards/tkc/tkc1800/config.h index 17441b0849..02fccd82ff 100644 --- a/keyboards/tkc/tkc1800/config.h +++ b/keyboards/tkc/tkc1800/config.h @@ -96,54 +96,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/tmo50/config.h b/keyboards/tmo50/config.h index 666f9fef15..4547fcf63e 100644 --- a/keyboards/tmo50/config.h +++ b/keyboards/tmo50/config.h @@ -111,54 +111,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/treadstone48/rev1/config.h b/keyboards/treadstone48/rev1/config.h index 75e5252b3f..ad9de636d0 100644 --- a/keyboards/treadstone48/rev1/config.h +++ b/keyboards/treadstone48/rev1/config.h @@ -127,59 +127,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/treadstone48/rev2/config.h b/keyboards/treadstone48/rev2/config.h index e5be65f55c..6df1467d8c 100644 --- a/keyboards/treadstone48/rev2/config.h +++ b/keyboards/treadstone48/rev2/config.h @@ -121,59 +121,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/treasure/type9/config.h b/keyboards/treasure/type9/config.h index 1c65a36439..cc629e3e45 100644 --- a/keyboards/treasure/type9/config.h +++ b/keyboards/treasure/type9/config.h @@ -99,54 +99,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/ua62/config.h b/keyboards/ua62/config.h index c27ceafeb3..492bba93e8 100644 --- a/keyboards/ua62/config.h +++ b/keyboards/ua62/config.h @@ -122,59 +122,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/uranuma/config.h b/keyboards/uranuma/config.h index b3dc62b52d..c5acad4882 100644 --- a/keyboards/uranuma/config.h +++ b/keyboards/uranuma/config.h @@ -108,59 +108,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/v60_type_r/config.h b/keyboards/v60_type_r/config.h index cc6c1f4508..c013bb9931 100644 --- a/keyboards/v60_type_r/config.h +++ b/keyboards/v60_type_r/config.h @@ -100,54 +100,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/wallaby/config.h b/keyboards/wallaby/config.h index c81c97ff1c..3c0d446418 100644 --- a/keyboards/wallaby/config.h +++ b/keyboards/wallaby/config.h @@ -121,59 +121,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/westfoxtrot/cyclops/config.h b/keyboards/westfoxtrot/cyclops/config.h index 4ad660695d..ce5d3bbbc1 100644 --- a/keyboards/westfoxtrot/cyclops/config.h +++ b/keyboards/westfoxtrot/cyclops/config.h @@ -86,54 +86,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/wilba_tech/rama_works_m10_b/config.h b/keyboards/wilba_tech/rama_works_m10_b/config.h index 4d41aae567..d30cf7fe84 100644 --- a/keyboards/wilba_tech/rama_works_m10_b/config.h +++ b/keyboards/wilba_tech/rama_works_m10_b/config.h @@ -90,54 +90,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/wilba_tech/rama_works_u80_a/config.h b/keyboards/wilba_tech/rama_works_u80_a/config.h index 0985183d3e..2bc32a7006 100644 --- a/keyboards/wilba_tech/rama_works_u80_a/config.h +++ b/keyboards/wilba_tech/rama_works_u80_a/config.h @@ -89,54 +89,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/wilba_tech/wt60_a/config.h b/keyboards/wilba_tech/wt60_a/config.h index bfb524c4e8..587c9b9ae7 100644 --- a/keyboards/wilba_tech/wt60_a/config.h +++ b/keyboards/wilba_tech/wt60_a/config.h @@ -89,54 +89,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/wilba_tech/wt60_d/config.h b/keyboards/wilba_tech/wt60_d/config.h index 1588f4c570..e6d367f4b1 100644 --- a/keyboards/wilba_tech/wt60_d/config.h +++ b/keyboards/wilba_tech/wt60_d/config.h @@ -89,54 +89,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/wilba_tech/wt60_xt/config.h b/keyboards/wilba_tech/wt60_xt/config.h index a16c3c063a..43f3f70db8 100644 --- a/keyboards/wilba_tech/wt60_xt/config.h +++ b/keyboards/wilba_tech/wt60_xt/config.h @@ -92,54 +92,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/wilba_tech/wt65_a/config.h b/keyboards/wilba_tech/wt65_a/config.h index a64a99efd9..4eca9b3ba0 100644 --- a/keyboards/wilba_tech/wt65_a/config.h +++ b/keyboards/wilba_tech/wt65_a/config.h @@ -89,54 +89,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/wilba_tech/wt65_b/config.h b/keyboards/wilba_tech/wt65_b/config.h index fdc44de843..7db0552ce6 100644 --- a/keyboards/wilba_tech/wt65_b/config.h +++ b/keyboards/wilba_tech/wt65_b/config.h @@ -89,54 +89,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/wilba_tech/wt69_a/config.h b/keyboards/wilba_tech/wt69_a/config.h index d4d50e24b3..d8184a8d2e 100644 --- a/keyboards/wilba_tech/wt69_a/config.h +++ b/keyboards/wilba_tech/wt69_a/config.h @@ -89,54 +89,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/wilba_tech/wt75_a/config.h b/keyboards/wilba_tech/wt75_a/config.h index 1bcfb08adc..479cdda00d 100644 --- a/keyboards/wilba_tech/wt75_a/config.h +++ b/keyboards/wilba_tech/wt75_a/config.h @@ -89,54 +89,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/wilba_tech/wt75_b/config.h b/keyboards/wilba_tech/wt75_b/config.h index ee7783e723..e6365c4ef3 100644 --- a/keyboards/wilba_tech/wt75_b/config.h +++ b/keyboards/wilba_tech/wt75_b/config.h @@ -89,54 +89,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/wilba_tech/wt75_c/config.h b/keyboards/wilba_tech/wt75_c/config.h index 900c8fb1af..bbc4757e06 100644 --- a/keyboards/wilba_tech/wt75_c/config.h +++ b/keyboards/wilba_tech/wt75_c/config.h @@ -89,54 +89,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/wilba_tech/wt80_a/config.h b/keyboards/wilba_tech/wt80_a/config.h index 33c4299a66..a09bcaebad 100644 --- a/keyboards/wilba_tech/wt80_a/config.h +++ b/keyboards/wilba_tech/wt80_a/config.h @@ -89,54 +89,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/x16/config.h b/keyboards/x16/config.h index 23509e4300..7dda59b948 100644 --- a/keyboards/x16/config.h +++ b/keyboards/x16/config.h @@ -118,59 +118,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/xiudi/xd84/config.h b/keyboards/xiudi/xd84/config.h index 9aa63a93f0..bba8cf5566 100644 --- a/keyboards/xiudi/xd84/config.h +++ b/keyboards/xiudi/xd84/config.h @@ -116,58 +116,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/xiudi/xd87/config.h b/keyboards/xiudi/xd87/config.h index 24e2dc2330..41e8bf3690 100644 --- a/keyboards/xiudi/xd87/config.h +++ b/keyboards/xiudi/xd87/config.h @@ -105,54 +105,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/xiudi/xd96/config.h b/keyboards/xiudi/xd96/config.h index 280fd39df5..5ec2543ffa 100644 --- a/keyboards/xiudi/xd96/config.h +++ b/keyboards/xiudi/xd96/config.h @@ -117,58 +117,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/yd68/config.h b/keyboards/yd68/config.h index 0a2b93e617..a501a98476 100644 --- a/keyboards/yd68/config.h +++ b/keyboards/yd68/config.h @@ -102,54 +102,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP1 H -//#define MAGIC_KEY_HELP2 SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0_ALT1 ESC -//#define MAGIC_KEY_LAYER0_ALT2 GRAVE -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER PAUSE -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/yurei/config.h b/keyboards/yurei/config.h index c3527956ae..57877dc8fa 100644 --- a/keyboards/yurei/config.h +++ b/keyboards/yurei/config.h @@ -121,59 +121,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/yushakobo/quick7/config.h b/keyboards/yushakobo/quick7/config.h index fdff5d92ec..01cc0f0a87 100644 --- a/keyboards/yushakobo/quick7/config.h +++ b/keyboards/yushakobo/quick7/config.h @@ -121,59 +121,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/zvecr/split_blackpill/config.h b/keyboards/zvecr/split_blackpill/config.h index 33653abc64..c6ca34779a 100644 --- a/keyboards/zvecr/split_blackpill/config.h +++ b/keyboards/zvecr/split_blackpill/config.h @@ -99,59 +99,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/zvecr/zv48/config.h b/keyboards/zvecr/zv48/config.h index 15ff8c4e84..881282c286 100644 --- a/keyboards/zvecr/zv48/config.h +++ b/keyboards/zvecr/zv48/config.h @@ -105,59 +105,6 @@ */ //#define FORCE_NKRO -/* - * Magic Key Options - * - * Magic keys are hotkey commands that allow control over firmware functions of - * the keyboard. They are best used in combination with the HID Listen program, - * found here: https://www.pjrc.com/teensy/hid_listen.html - * - * The options below allow the magic key functionality to be changed. This is - * useful if your keyboard/keypad is missing keys and you want magic key support. - * - */ - -/* key combination for magic key command */ -/* defined by default; to change, uncomment and set to the combination you want */ -// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) - -/* control how magic key switches layers */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false - -/* override magic key keymap */ -//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS -//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM -//#define MAGIC_KEY_HELP H -//#define MAGIC_KEY_HELP_ALT SLASH -//#define MAGIC_KEY_DEBUG D -//#define MAGIC_KEY_DEBUG_MATRIX X -//#define MAGIC_KEY_DEBUG_KBD K -//#define MAGIC_KEY_DEBUG_MOUSE M -//#define MAGIC_KEY_VERSION V -//#define MAGIC_KEY_STATUS S -//#define MAGIC_KEY_CONSOLE C -//#define MAGIC_KEY_LAYER0 0 -//#define MAGIC_KEY_LAYER0_ALT GRAVE -//#define MAGIC_KEY_LAYER1 1 -//#define MAGIC_KEY_LAYER2 2 -//#define MAGIC_KEY_LAYER3 3 -//#define MAGIC_KEY_LAYER4 4 -//#define MAGIC_KEY_LAYER5 5 -//#define MAGIC_KEY_LAYER6 6 -//#define MAGIC_KEY_LAYER7 7 -//#define MAGIC_KEY_LAYER8 8 -//#define MAGIC_KEY_LAYER9 9 -//#define MAGIC_KEY_BOOTLOADER B -//#define MAGIC_KEY_BOOTLOADER_ALT ESC -//#define MAGIC_KEY_LOCK CAPS -//#define MAGIC_KEY_EEPROM E -//#define MAGIC_KEY_EEPROM_CLEAR BSPACE -//#define MAGIC_KEY_NKRO N -//#define MAGIC_KEY_SLEEP_LED Z - /* * Feature disable options * These options are also useful to firmware size reduction. From 03f4c53564550024821aafadef69b5daaaa09abd Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Sun, 26 Sep 2021 10:10:40 +0000 Subject: [PATCH 132/595] Unicomp Mini M handwired Configurator fix (#14609) * apply human-friendly formatting * correct info.json data --- keyboards/handwired/unicomp_mini_m/info.json | 545 ++++--------------- 1 file changed, 96 insertions(+), 449 deletions(-) diff --git a/keyboards/handwired/unicomp_mini_m/info.json b/keyboards/handwired/unicomp_mini_m/info.json index 9cce6073a7..e2438eaeeb 100644 --- a/keyboards/handwired/unicomp_mini_m/info.json +++ b/keyboards/handwired/unicomp_mini_m/info.json @@ -5,455 +5,102 @@ "layouts": { "LAYOUT": { "layout": [ - { "label": "Esc", - "x": 0, - "y": 0 - }, - { - "label": "F1", - "x": 2, - "y": 0 - }, - { - "label": "F2", - "x": 3, - "y": 0 - }, - { - "label": "F3", - "x": 4, - "y": 0 - }, - { - "label": "F4", - "x": 5, - "y": 0 - }, - { - "label": "F5", - "x": 6.5, - "y": 0 - }, - { - "label": "F6", - "x": 7.5, - "y": 0 - }, - { - "label": "F7", - "x": 8.5, - "y": 0 - }, - { - "label": "F8", - "x": 9.5, - "y": 0 - }, - { - "label": "F9", - "x": 11, - "y": 0 - }, - { - "label": "F10", - "x": 12, - "y": 0 - }, - { - "label": "F11", - "x": 13, - "y": 0 - }, - { - "label": "F12", - "x": 14, - "y": 0 - }, - { - "label": "PrtSc", - "x": 15.25, - "y": 0 - }, - { - "label": "Scroll Lock", - "x": 16.25, - "y": 0 - }, - { - "label": "Pause", - "x": 17.25, - "y": 0 - }, - { - "label": "~", - "x": 0, - "y": 1.5 - }, - { - "label": "!", - "x": 1, - "y": 1.5 - }, - { - "label": "@", - "x": 2, - "y": 1.5 - }, - { - "label": "#", - "x": 3, - "y": 1.5 - }, - { - "label": "$", - "x": 4, - "y": 1.5 - }, - { - "label": "%", - "x": 5, - "y": 1.5 - }, - { - "label": "^", - "x": 6, - "y": 1.5 - }, - { - "label": "&", - "x": 7, - "y": 1.5 - }, - { - "label": "*", - "x": 8, - "y": 1.5 - }, - { - "label": "(", - "x": 9, - "y": 1.5 - }, - { - "label": ")", - "x": 10, - "y": 1.5 - }, - { - "label": "_", - "x": 11, - "y": 1.5 - }, - { - "label": "+", - "x": 12, - "y": 1.5 - }, - { - "label": "Backspace", - "x": 13, - "y": 1.5, - "w": 2 - }, - { - "label": "Insert", - "x": 15.25, - "y": 1.5 - }, - { - "label": "Home", - "x": 16.25, - "y": 1.5 - }, - { - "label": "PgUp", - "x": 17.25, - "y": 1.5 - }, - { - "label": "Tab", - "x": 0, - "y": 2.5, - "w": 1.5 - }, - { - "label": "Q", - "x": 1.5, - "y": 2.5 - }, - { - "label": "W", - "x": 2.5, - "y": 2.5 - }, - { - "label": "E", - "x": 3.5, - "y": 2.5 - }, - { - "label": "R", - "x": 4.5, - "y": 2.5 - }, - { - "label": "T", - "x": 5.5, - "y": 2.5 - }, - { - "label": "Y", - "x": 6.5, - "y": 2.5 - }, - { - "label": "U", - "x": 7.5, - "y": 2.5 - }, - { - "label": "I", - "x": 8.5, - "y": 2.5 - }, - { - "label": "O", - "x": 9.5, - "y": 2.5 - }, - { - "label": "P", - "x": 10.5, - "y": 2.5 - }, - { - "label": "{", - "x": 11.5, - "y": 2.5 - }, - { - "label": "}", - "x": 12.5, - "y": 2.5 - }, - { - "label": "|", - "x": 13.5, - "y": 2.5, - "w": 1.5 - }, - { - "label": "Delete", - "x": 15.25, - "y": 2.5 - }, - { - "label": "End", - "x": 16.25, - "y": 2.5 - }, - { - "label": "PgDn", - "x": 17.25, - "y": 2.5 - }, - { - "label": "Caps Lock", - "x": 0, - "y": 3.5, - "w": 1.75 - }, - { - "label": "A", - "x": 1.75, - "y": 3.5 - }, - { - "label": "S", - "x": 2.75, - "y": 3.5 - }, - { - "label": "D", - "x": 3.75, - "y": 3.5 - }, - { - "label": "F", - "x": 4.75, - "y": 3.5 - }, - { - "label": "G", - "x": 5.75, - "y": 3.5 - }, - { - "label": "H", - "x": 6.75, - "y": 3.5 - }, - { - "label": "J", - "x": 7.75, - "y": 3.5 - }, - { - "label": "K", - "x": 8.75, - "y": 3.5 - }, - { - "label": "L", - "x": 9.75, - "y": 3.5 - }, - { - "label": ":", - "x": 10.75, - "y": 3.5 - }, - { - "label": "\"", - "x": 11.75, - "y": 3.5 - }, - { - "label": "Enter", - "x": 12.75, - "y": 3.5, - "w": 2.25 - }, - { - "label": "Shift", - "x": 0, - "y": 4.5, - "w": 2.25 - }, - { - "label": "Z", - "x": 2.25, - "y": 4.5 - }, - { - "label": "X", - "x": 3.25, - "y": 4.5 - }, - { - "label": "C", - "x": 4.25, - "y": 4.5 - }, - { - "label": "V", - "x": 5.25, - "y": 4.5 - }, - { - "label": "B", - "x": 6.25, - "y": 4.5 - }, - { - "label": "N", - "x": 7.25, - "y": 4.5 - }, - { - "label": "M", - "x": 8.25, - "y": 4.5 - }, - { - "label": "<", - "x": 9.25, - "y": 4.5 - }, - { - "label": ">", - "x": 10.25, - "y": 4.5 - }, - { - "label": "?", - "x": 11.25, - "y": 4.5 - }, - { - "label": "Shift", - "x": 12.25, - "y": 4.5, - "w": 2.75 - }, - { - "label": "\u2191", - "x": 16.25, - "y": 4.5 - }, - { - "label": "Ctrl", - "x": 0, - "y": 5.5, - "w": 1.5 - }, - { - "label": "Meta", - "x": 1.5, - "y": 5.5, - "w": 1 - }, - { - "label": "Alt", - "x": 2.5, - "y": 5.5, - "w": 1.5 - }, - { - "label": "Space", - "x": 4, - "y": 5.5, - "w": 5.75 - }, - { - "label": "Alt", - "x": 9.75, - "y": 5.5, - "w": 1.25 - }, - { - "label": "Meta", - "x": 11, - "y": 5.5, - "w": 1.5 - }, - { - "label": "Menu", - "x": 12.5, - "y": 5.5, - "w": 1 - }, - { - "label": "Ctrl", - "x": 13.5, - "y": 5.5, - "w": 1.5 - }, - { - "label": "\u2190", - "x": 15.25, - "y": 5.5 - }, - { - "label": "\u2193", - "x": 16.25, - "y": 5.5 - }, - { - "label": "\u2192", - "x": 17.25, - "y": 5.5 - } + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":2, "y":0}, + {"label":"F2", "x":3, "y":0}, + {"label":"F3", "x":4, "y":0}, + {"label":"F4", "x":5, "y":0}, + {"label":"F5", "x":6.5, "y":0}, + {"label":"F6", "x":7.5, "y":0}, + {"label":"F7", "x":8.5, "y":0}, + {"label":"F8", "x":9.5, "y":0}, + {"label":"F9", "x":11, "y":0}, + {"label":"F10", "x":12, "y":0}, + {"label":"F11", "x":13, "y":0}, + {"label":"F12", "x":14, "y":0}, + {"label":"Pause / SysReq", "x":15.5, "y":0}, + {"label":"Scroll Lock / Num Lock", "x":16.5, "y":0}, + {"label":"Pause / Reset", "x":17.5, "y":0}, + + {"label":"`", "x":0, "y":2}, + {"label":"1", "x":1, "y":2}, + {"label":"2", "x":2, "y":2}, + {"label":"3", "x":3, "y":2}, + {"label":"4", "x":4, "y":2}, + {"label":"5", "x":5, "y":2}, + {"label":"6", "x":6, "y":2}, + {"label":"7", "x":7, "y":2}, + {"label":"8", "x":8, "y":2}, + {"label":"9", "x":9, "y":2}, + {"label":"0", "x":10, "y":2}, + {"label":"-", "x":11, "y":2}, + {"label":"=", "x":12, "y":2}, + {"label":"No", "x":13, "y":2}, + {"label":"Backspace", "x":14, "y":2}, + {"label":"Insert", "x":15.5, "y":2}, + {"label":"Home", "x":16.5, "y":2}, + {"label":"Page Up", "x":17.5, "y":2}, + + {"label":"Tab", "x":0, "y":3, "w":1.5}, + {"label":"Q", "x":1.5, "y":3}, + {"label":"W", "x":2.5, "y":3}, + {"label":"E", "x":3.5, "y":3}, + {"label":"R", "x":4.5, "y":3}, + {"label":"T", "x":5.5, "y":3}, + {"label":"Y", "x":6.5, "y":3}, + {"label":"U", "x":7.5, "y":3}, + {"label":"I", "x":8.5, "y":3}, + {"label":"O", "x":9.5, "y":3}, + {"label":"P", "x":10.5, "y":3}, + {"label":"[", "x":11.5, "y":3}, + {"label":"]", "x":12.5, "y":3}, + {"label":"\\", "x":13.5, "y":3, "w":1.5}, + {"label":"Delete", "x":15.5, "y":3}, + {"label":"End", "x":16.5, "y":3}, + {"label":"Page Down", "x":17.5, "y":3}, + + {"label":"Caps Lock", "x":0, "y":4, "w":1.75}, + {"label":"A", "x":1.75, "y":4}, + {"label":"S", "x":2.75, "y":4}, + {"label":"D", "x":3.75, "y":4}, + {"label":"F", "x":4.75, "y":4}, + {"label":"G", "x":5.75, "y":4}, + {"label":"H", "x":6.75, "y":4}, + {"label":"J", "x":7.75, "y":4}, + {"label":"K", "x":8.75, "y":4}, + {"label":"L", "x":9.75, "y":4}, + {"label":";", "x":10.75, "y":4}, + {"label":"'", "x":11.75, "y":4}, + {"label":"No", "x":12.75, "y":4}, + {"label":"Enter", "x":13.75, "y":4, "w":1.25}, + + {"label":"Shift", "x":0, "y":5, "w":1.25}, + {"label":"No", "x":1.25, "y":5}, + {"label":"Z", "x":2.25, "y":5}, + {"label":"X", "x":3.25, "y":5}, + {"label":"C", "x":4.25, "y":5}, + {"label":"V", "x":5.25, "y":5}, + {"label":"B", "x":6.25, "y":5}, + {"label":"N", "x":7.25, "y":5}, + {"label":"M", "x":8.25, "y":5}, + {"label":",", "x":9.25, "y":5}, + {"label":".", "x":10.25, "y":5}, + {"label":"/", "x":11.25, "y":5}, + {"label":"No", "x":12.25, "y":5}, + {"label":"Shift", "x":13.25, "y":5, "w":1.75}, + {"label":"Up", "x":16.5, "y":5}, + + {"label":"Ctrl", "x":0, "y":6, "w":1.5}, + {"label":"GUI", "x":1.5, "y":6}, + {"label":"Alt", "x":2.5, "y":6, "w":1.5}, + {"label":"Space", "x":4, "y":6, "w":6}, + {"label":"Alt", "x":10, "y":6}, + {"label":"GUI", "x":11, "y":6, "w":1.5}, + {"label":"App", "x":12.5, "y":6}, + {"label":"Ctrl", "x":13.5, "y":6, "w":1.5}, + {"label":"Left", "x":15.5, "y":6}, + {"label":"Down", "x":16.5, "y":6}, + {"label":"Right", "x":17.5, "y":6} ] } } From f07de1b3094fbb94a70435c80b06b676db1f46b8 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Sun, 26 Sep 2021 07:54:17 -0700 Subject: [PATCH 133/595] [Keyboard] Fix double comment in config files (#14615) --- keyboards/metamechs/timberwolf/config.h | 1 - keyboards/mint60/config.h | 2 -- keyboards/miuni32/config.h | 1 - keyboards/snampad/config.h | 1 - 4 files changed, 5 deletions(-) diff --git a/keyboards/metamechs/timberwolf/config.h b/keyboards/metamechs/timberwolf/config.h index 353d8073a1..fa0791a8ea 100644 --- a/keyboards/metamechs/timberwolf/config.h +++ b/keyboards/metamechs/timberwolf/config.h @@ -95,7 +95,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/mint60/config.h b/keyboards/mint60/config.h index c38add26e0..b421349d86 100644 --- a/keyboards/mint60/config.h +++ b/keyboards/mint60/config.h @@ -95,7 +95,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* /* ws2812 RGB LED */ #define RGB_DI_PIN D3 @@ -124,4 +123,3 @@ along with this program. If not, see . //#define NO_ACTION_ONESHOT //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION - diff --git a/keyboards/miuni32/config.h b/keyboards/miuni32/config.h index 35eb14e666..d2b98a9284 100644 --- a/keyboards/miuni32/config.h +++ b/keyboards/miuni32/config.h @@ -86,7 +86,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/snampad/config.h b/keyboards/snampad/config.h index 8b08f55025..64bb16fb40 100644 --- a/keyboards/snampad/config.h +++ b/keyboards/snampad/config.h @@ -117,7 +117,6 @@ along with this program. If not, see . */ //#define FORCE_NKRO -/* /* * Feature disable options * These options are also useful to firmware size reduction. From 3823fdc9e0a059040edb43e954dc2c9d3d3d8c45 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Sun, 26 Sep 2021 09:50:22 -0700 Subject: [PATCH 134/595] [Keyboard] Fix Compile issues for Signum 3.0 (#14588) * [Keyboard] Fix Compile issues for Signum 3.0 * quantuuum --- keyboards/signum/3_0/{signum.c => 3_0.c} | 2 +- keyboards/signum/3_0/{signum.h => 3_0.h} | 0 keyboards/signum/3_0/elitec/elitec.h | 3 +-- keyboards/signum/3_0/teensy/teensy.h | 3 +-- 4 files changed, 3 insertions(+), 5 deletions(-) rename keyboards/signum/3_0/{signum.c => 3_0.c} (97%) rename keyboards/signum/3_0/{signum.h => 3_0.h} (100%) diff --git a/keyboards/signum/3_0/signum.c b/keyboards/signum/3_0/3_0.c similarity index 97% rename from keyboards/signum/3_0/signum.c rename to keyboards/signum/3_0/3_0.c index b74bd52b28..2775713bf6 100644 --- a/keyboards/signum/3_0/signum.c +++ b/keyboards/signum/3_0/3_0.c @@ -13,4 +13,4 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ -#include "signum.h" +#include "3_0.h" diff --git a/keyboards/signum/3_0/signum.h b/keyboards/signum/3_0/3_0.h similarity index 100% rename from keyboards/signum/3_0/signum.h rename to keyboards/signum/3_0/3_0.h diff --git a/keyboards/signum/3_0/elitec/elitec.h b/keyboards/signum/3_0/elitec/elitec.h index 7498fdcee3..dfb7e01164 100644 --- a/keyboards/signum/3_0/elitec/elitec.h +++ b/keyboards/signum/3_0/elitec/elitec.h @@ -1,4 +1,3 @@ #pragma once -#include "quantum.h" -#include "signum.h" +#include "3_0.h" diff --git a/keyboards/signum/3_0/teensy/teensy.h b/keyboards/signum/3_0/teensy/teensy.h index ac02c3cbee..073accaa61 100644 --- a/keyboards/signum/3_0/teensy/teensy.h +++ b/keyboards/signum/3_0/teensy/teensy.h @@ -15,5 +15,4 @@ */ #pragma once -#include "quantum.h" -#include "signum.h" +#include "3_0.h" From 5f38a98fa07677be960b71b8e3b0a1785effe0d8 Mon Sep 17 00:00:00 2001 From: peott-fr <70998091+peott-fr@users.noreply.github.com> Date: Sun, 26 Sep 2021 21:41:48 -0700 Subject: [PATCH 135/595] Adding SP Mini keymap. (#14593) --- .../viktus/sp_mini/keymaps/peott-fr/keymap.c | 117 ++++++++++++++++++ 1 file changed, 117 insertions(+) create mode 100644 keyboards/viktus/sp_mini/keymaps/peott-fr/keymap.c diff --git a/keyboards/viktus/sp_mini/keymaps/peott-fr/keymap.c b/keyboards/viktus/sp_mini/keymaps/peott-fr/keymap.c new file mode 100644 index 0000000000..93d65c93a2 --- /dev/null +++ b/keyboards/viktus/sp_mini/keymaps/peott-fr/keymap.c @@ -0,0 +1,117 @@ + /* Copyright 2021 peott + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +// Layers by name +enum custom_layers { + _BASE, + _LHAND, + _RHAND, + _NUM +}; + +// Layers defined by function +#define LHAND LT(_LHAND,KC_SPC) +#define RHAND LT(_RHAND,KC_BSPC) +#define NUM TG(_NUM) +// Keycodes for cleaner code +#define L_CTRL LCTL_T(KC_MPRV) +#define L_ALT LALT_T(KC_MNXT) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_all( + KC_MPLY, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, + KC_TRNS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, NUM, + KC_TRNS, KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_DEL, + KC_TRNS, KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_UP, + KC_TRNS, L_CTRL, KC_LGUI, L_ALT, KC_NO, LHAND, RHAND, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [_LHAND] = LAYOUT_all( + RESET, KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, + KC_HOME, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI, KC_TRNS, KC_TRNS, + KC_PGUP, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_ENT, KC_TRNS, + KC_PGDN, KC_LSFT, KC_CALC, KC_MYCM, KC_TRNS, KC_ENT, KC_BSPC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_RSPC, KC_TRNS, + KC_END, KC_LCTL, KC_TRNS, KC_LALT, KC_TRNS, KC_TRNS, KC_TRNS, KC_RALT, KC_RCTL, KC_TRNS, KC_TRNS, KC_TRNS + ), + [_RHAND] = LAYOUT_all( + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, + KC_NO, KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_UNDS, KC_PLUS, KC_NO, KC_PIPE, + KC_NO, KC_LSFT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_RSPC, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO + ), + [_NUM] = LAYOUT_all( + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, KC_NO, KC_NO, KC_NO, KC_F13, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_P7, KC_P8, KC_P9, KC_PPLS, KC_NO, KC_NO, KC_NO, NUM, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_P4, KC_P5, KC_P6, KC_PCMM, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_P1, KC_P2, KC_P3, KC_PEQL, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_P0, KC_PDOT, KC_PENT, KC_NO, KC_NO, KC_NO + ) +}; + +void keyboard_pre_init_user(void) { + setPinOutput(F5); // initialize F5 for LED + setPinOutput(F6); // initialize F6 for LED + setPinOutput(F7); // initialize F7 for LED +} + +layer_state_t layer_state_set_user(layer_state_t state) { + writePinLow(F5); + writePinLow(F6); + writePinLow(F7); + switch (get_highest_layer(state)) { + case _LHAND: + writePinHigh(F5); + break; + case _RHAND: + writePinHigh(F6); + break; + case _NUM: // replace 'XXXX' with the layer or function name + writePinHigh(F7); + break; + case KC_F13: + writePinHigh(F7); + writePinHigh(F5); + writePinHigh(F6); + break; + } + return state; +} + +bool spongebob_mode = false; +bool spongebob_case = false; +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + if (spongebob_mode) { + switch(keycode) { + case KC_A...KC_Z: + if (record->event.pressed) { + (spongebob_case ^= 1) == 0 ? tap_code16(S(keycode)) : tap_code(keycode); + return false; break; + } + } + } + switch(keycode) { + case KC_F13: + if (record->event.pressed) { + spongebob_mode ^= 1; + } + return false; break; + } + return true; +} + + From fce9cb933845bf0b74d322eba02de3b76daaeb84 Mon Sep 17 00:00:00 2001 From: Zach White Date: Mon, 27 Sep 2021 10:02:54 -0700 Subject: [PATCH 136/595] Cleanup issues identified by lgtm (#14459) * cleanup issues identified by lgtm * fix the git_status check --- keyboards/dekunukem/duckypad/keymaps/m4cs/sysinfo.py | 1 - keyboards/ergodox_ez/util/compile_keymap.py | 5 ----- .../util/keymap_beautifier/KeymapBeautifier.py | 1 - .../community/ergodox/algernon/tools/log-to-heatmap.py | 4 +--- layouts/community/ergodox/algernon/tools/text-to-log.py | 1 - .../community/ergodox/german-manuneo/compile_keymap.py | 5 ----- lib/python/qmk/cli/doctor/linux.py | 8 +++----- lib/python/qmk/cli/doctor/main.py | 9 +++++---- lib/python/qmk/cli/generate/config_h.py | 2 +- lib/python/qmk/cli/generate/dfu_header.py | 2 +- lib/python/qmk/cli/generate/keyboard_h.py | 2 +- lib/python/qmk/cli/generate/layouts.py | 2 +- lib/python/qmk/info.py | 8 ++++---- lib/python/qmk/keymap.py | 4 ++-- users/dennytom/chording_engine/chord.py | 3 +-- util/stm32eeprom_parser.py | 1 - util/uf2conv.py | 8 ++++---- 17 files changed, 24 insertions(+), 42 deletions(-) diff --git a/keyboards/dekunukem/duckypad/keymaps/m4cs/sysinfo.py b/keyboards/dekunukem/duckypad/keymaps/m4cs/sysinfo.py index 04cf343ea6..4dfcd4d4d1 100644 --- a/keyboards/dekunukem/duckypad/keymaps/m4cs/sysinfo.py +++ b/keyboards/dekunukem/duckypad/keymaps/m4cs/sysinfo.py @@ -21,7 +21,6 @@ import hid import time -import string import psutil import GPUtil import datetime diff --git a/keyboards/ergodox_ez/util/compile_keymap.py b/keyboards/ergodox_ez/util/compile_keymap.py index f427d6fd80..b447ecaf5c 100755 --- a/keyboards/ergodox_ez/util/compile_keymap.py +++ b/keyboards/ergodox_ez/util/compile_keymap.py @@ -584,11 +584,6 @@ def unicode_macro_cases(config): for macro_id, uc_hex in config['unicode_macros'].items(): hi = int(uc_hex, 16) >> 8 lo = int(uc_hex, 16) & 0xFF - unimacro_keys = ", ".join( - "T({})".format( - "KP_" + digit if digit.isdigit() else digit - ) for digit in uc_hex - ) yield UNICODE_MACRO_TEMPLATE.format( macro_id=macro_id, hi=hi, lo=lo ) diff --git a/keyboards/ergodox_ez/util/keymap_beautifier/KeymapBeautifier.py b/keyboards/ergodox_ez/util/keymap_beautifier/KeymapBeautifier.py index f55bdaf2d7..9beee37961 100755 --- a/keyboards/ergodox_ez/util/keymap_beautifier/KeymapBeautifier.py +++ b/keyboards/ergodox_ez/util/keymap_beautifier/KeymapBeautifier.py @@ -227,7 +227,6 @@ class KeymapBeautifier: self.layer_keys_pointer = 0 begin = self.layer_keys_pointer - end = begin + n_columns return self.layer_keys[self.layer_keys_pointer-n_keys:self.layer_keys_pointer] key_coordinates_counter = 0 diff --git a/layouts/community/ergodox/algernon/tools/log-to-heatmap.py b/layouts/community/ergodox/algernon/tools/log-to-heatmap.py index e927e0e39d..5f52d9932b 100755 --- a/layouts/community/ergodox/algernon/tools/log-to-heatmap.py +++ b/layouts/community/ergodox/algernon/tools/log-to-heatmap.py @@ -8,7 +8,6 @@ import time from math import floor from os.path import dirname -from subprocess import Popen, PIPE, STDOUT from blessings import Terminal class Heatmap(object): @@ -122,7 +121,6 @@ class Heatmap(object): for (c, r) in self.log: coords = self.coord(c, r) - b, n = coords cap = self.max_cnt if cap == 0: cap = 1 @@ -302,7 +300,7 @@ def main(opts): break if not process_line(line, heatmaps, opts): continue - except: + except Exception: pass stamped_log = open ("%s/stamped-log" % (out_dir), "a+") diff --git a/layouts/community/ergodox/algernon/tools/text-to-log.py b/layouts/community/ergodox/algernon/tools/text-to-log.py index f080c32cd0..ba60a2e281 100755 --- a/layouts/community/ergodox/algernon/tools/text-to-log.py +++ b/layouts/community/ergodox/algernon/tools/text-to-log.py @@ -1,6 +1,5 @@ #!/usr/bin/env python3 -import os import sys charmap = { diff --git a/layouts/community/ergodox/german-manuneo/compile_keymap.py b/layouts/community/ergodox/german-manuneo/compile_keymap.py index 9ad5c88ecc..df5d429842 100644 --- a/layouts/community/ergodox/german-manuneo/compile_keymap.py +++ b/layouts/community/ergodox/german-manuneo/compile_keymap.py @@ -584,11 +584,6 @@ def unicode_macro_cases(config): for macro_id, uc_hex in config['unicode_macros'].items(): hi = int(uc_hex, 16) >> 8 lo = int(uc_hex, 16) & 0xFF - unimacro_keys = ", ".join( - "T({})".format( - "KP_" + digit if digit.isdigit() else digit - ) for digit in uc_hex - ) yield UNICODE_MACRO_TEMPLATE.format( macro_id=macro_id, hi=hi, lo=lo ) diff --git a/lib/python/qmk/cli/doctor/linux.py b/lib/python/qmk/cli/doctor/linux.py index 6ce00f6ef1..94683d3307 100644 --- a/lib/python/qmk/cli/doctor/linux.py +++ b/lib/python/qmk/cli/doctor/linux.py @@ -118,10 +118,9 @@ def check_udev_rules(): cli.log.warning("{fg_yellow}Found old, deprecated udev rules for '%s' boards. The new rules on https://docs.qmk.fm/#/faq_build?id=linux-udev-rules offer better security with the same functionality.", bootloader) else: # For caterina, check if ModemManager is running - if bootloader == "caterina": - if check_modem_manager(): - rc = CheckStatus.WARNING - cli.log.warning("{fg_yellow}Detected ModemManager without the necessary udev rules. Please either disable it or set the appropriate udev rules if you are using a Pro Micro.") + if bootloader == "caterina" and check_modem_manager(): + cli.log.warning("{fg_yellow}Detected ModemManager without the necessary udev rules. Please either disable it or set the appropriate udev rules if you are using a Pro Micro.") + rc = CheckStatus.WARNING cli.log.warning("{fg_yellow}Missing or outdated udev rules for '%s' boards. Run 'sudo cp %s/util/udev/50-qmk.rules /etc/udev/rules.d/'.", bootloader, QMK_FIRMWARE) @@ -167,6 +166,5 @@ def os_test_linux(): return CheckStatus.OK else: cli.log.info("Detected {fg_cyan}Linux{fg_reset}.") - from .linux import check_udev_rules return check_udev_rules() diff --git a/lib/python/qmk/cli/doctor/main.py b/lib/python/qmk/cli/doctor/main.py index 6a31ccdfdd..ed20f46d3f 100755 --- a/lib/python/qmk/cli/doctor/main.py +++ b/lib/python/qmk/cli/doctor/main.py @@ -79,12 +79,13 @@ def doctor(cli): cli.log.info('CLI version: %s', cli.version) cli.log.info('QMK home: {fg_cyan}%s', QMK_FIRMWARE) - status = os_tests() + status = os_status = os_tests() + git_status = git_tests() - status = git_tests() + if git_status == CheckStatus.ERROR or (os_status == CheckStatus.OK and git_status == CheckStatus.WARNING): + status = git_status - venv = in_virtualenv() - if venv: + if in_virtualenv(): cli.log.info('CLI installed in virtualenv.') # Make sure the basic CLI tools we need are available and can be executed. diff --git a/lib/python/qmk/cli/generate/config_h.py b/lib/python/qmk/cli/generate/config_h.py index ca7e14fe6b..f16dca1de8 100755 --- a/lib/python/qmk/cli/generate/config_h.py +++ b/lib/python/qmk/cli/generate/config_h.py @@ -173,7 +173,7 @@ def generate_config_h(cli): kb_info_json = dotty(info_json(cli.args.keyboard)) # Build the info_config.h file. - config_h_lines = ['/* This file was generated by `qmk generate-config-h`. Do not edit or copy.' ' */', '', '#pragma once'] + config_h_lines = ['/* This file was generated by `qmk generate-config-h`. Do not edit or copy.', ' */', '', '#pragma once'] generate_config_items(kb_info_json, config_h_lines) diff --git a/lib/python/qmk/cli/generate/dfu_header.py b/lib/python/qmk/cli/generate/dfu_header.py index 211ed9991a..5a1b109f1e 100644 --- a/lib/python/qmk/cli/generate/dfu_header.py +++ b/lib/python/qmk/cli/generate/dfu_header.py @@ -30,7 +30,7 @@ def generate_dfu_header(cli): # Build the Keyboard.h file. kb_info_json = dotty(info_json(cli.config.generate_dfu_header.keyboard)) - keyboard_h_lines = ['/* This file was generated by `qmk generate-dfu-header`. Do not edit or copy.' ' */', '', '#pragma once'] + keyboard_h_lines = ['/* This file was generated by `qmk generate-dfu-header`. Do not edit or copy.', ' */', '', '#pragma once'] keyboard_h_lines.append(f'#define MANUFACTURER {kb_info_json["manufacturer"]}') keyboard_h_lines.append(f'#define PRODUCT {cli.config.generate_dfu_header.keyboard} Bootloader') diff --git a/lib/python/qmk/cli/generate/keyboard_h.py b/lib/python/qmk/cli/generate/keyboard_h.py index c9d7f549b3..f05178cede 100755 --- a/lib/python/qmk/cli/generate/keyboard_h.py +++ b/lib/python/qmk/cli/generate/keyboard_h.py @@ -36,7 +36,7 @@ def generate_keyboard_h(cli): has_layout_h = would_populate_layout_h(cli.args.keyboard) # Build the layouts.h file. - keyboard_h_lines = ['/* This file was generated by `qmk generate-keyboard-h`. Do not edit or copy.' ' */', '', '#pragma once', '#include "quantum.h"'] + keyboard_h_lines = ['/* This file was generated by `qmk generate-keyboard-h`. Do not edit or copy.', ' */', '', '#pragma once', '#include "quantum.h"'] if not has_layout_h: keyboard_h_lines.append('#pragma error(".h is only optional for data driven keyboards - kb.h == bad times")') diff --git a/lib/python/qmk/cli/generate/layouts.py b/lib/python/qmk/cli/generate/layouts.py index 4de982f822..e44266e1c8 100755 --- a/lib/python/qmk/cli/generate/layouts.py +++ b/lib/python/qmk/cli/generate/layouts.py @@ -38,7 +38,7 @@ def generate_layouts(cli): kb_info_json = info_json(cli.config.generate_layouts.keyboard) # Build the layouts.h file. - layouts_h_lines = ['/* This file was generated by `qmk generate-layouts`. Do not edit or copy.' ' */', '', '#pragma once'] + layouts_h_lines = ['/* This file was generated by `qmk generate-layouts`. Do not edit or copy.', ' */', '', '#pragma once'] if 'matrix_pins' in kb_info_json: if 'direct' in kb_info_json['matrix_pins']: diff --git a/lib/python/qmk/info.py b/lib/python/qmk/info.py index 7f3aabdc3b..1b4c42ff41 100644 --- a/lib/python/qmk/info.py +++ b/lib/python/qmk/info.py @@ -29,10 +29,10 @@ def info_json(keyboard): """Generate the info.json data for a specific keyboard. """ cur_dir = Path('keyboards') - rules = parse_rules_mk_file(cur_dir / keyboard / 'rules.mk') - if 'DEFAULT_FOLDER' in rules: - keyboard = rules['DEFAULT_FOLDER'] - rules = parse_rules_mk_file(cur_dir / keyboard / 'rules.mk', rules) + root_rules_mk = parse_rules_mk_file(cur_dir / keyboard / 'rules.mk') + + if 'DEFAULT_FOLDER' in root_rules_mk: + keyboard = root_rules_mk['DEFAULT_FOLDER'] info_data = { 'keyboard_name': str(keyboard), diff --git a/lib/python/qmk/keymap.py b/lib/python/qmk/keymap.py index 2d5921e7a8..6eec49cfd1 100644 --- a/lib/python/qmk/keymap.py +++ b/lib/python/qmk/keymap.py @@ -149,8 +149,8 @@ def is_keymap_dir(keymap, c=True, json=True, additional_files=None): for file in files: if (keymap / file).is_file(): if additional_files: - for file in additional_files: - if not (keymap / file).is_file(): + for additional_file in additional_files: + if not (keymap / additional_file).is_file(): return False return True diff --git a/users/dennytom/chording_engine/chord.py b/users/dennytom/chording_engine/chord.py index 707f36b82a..5e3b6d2834 100644 --- a/users/dennytom/chording_engine/chord.py +++ b/users/dennytom/chording_engine/chord.py @@ -1,5 +1,4 @@ from functools import reduce -import re strings = [] number_of_strings = -1 @@ -463,4 +462,4 @@ def secret_chord(PSEUDOLAYER, ACTION, INPUT_STRING, data, output_buffer, index, hash = hash[3:] if hash != "": - return add_key(PSEUDOLAYER, hash, ACTION, output_buffer, index, number_of_strings, strings) \ No newline at end of file + return add_key(PSEUDOLAYER, hash, ACTION, output_buffer, index, number_of_strings, strings) diff --git a/util/stm32eeprom_parser.py b/util/stm32eeprom_parser.py index b124f713d5..e08b67064b 100755 --- a/util/stm32eeprom_parser.py +++ b/util/stm32eeprom_parser.py @@ -197,7 +197,6 @@ def dumpBinary(data, canonical): print("") size = len(data) - empty_rows = 0 prev_row = '' first_repeat = True for pos in range(0, size, 16): diff --git a/util/uf2conv.py b/util/uf2conv.py index 044a7f2318..8677a828c9 100755 --- a/util/uf2conv.py +++ b/util/uf2conv.py @@ -78,7 +78,7 @@ def convert_from_uf2(buf): if datalen > 476: assert False, "Invalid UF2 data size at " + ptr newaddr = hd[3] - if curraddr == None: + if curraddr is None: appstartaddr = newaddr curraddr = newaddr padding = newaddr - curraddr @@ -171,7 +171,7 @@ def convert_from_hex_to_uf2(buf): break elif tp == 0: addr = upper | (rec[1] << 8) | rec[2] - if appstartaddr == None: + if appstartaddr is None: appstartaddr = addr i = 4 while i < len(rec) - 1: @@ -215,7 +215,7 @@ def get_drives(): def has_info(d): try: return os.path.isfile(d + INFO_FILE) - except: + except Exception: return False return list(filter(has_info, drives)) @@ -300,7 +300,7 @@ def main(): (ext, len(outbuf), appstartaddr)) if args.convert or ext != "uf2": drives = [] - if args.output == None: + if args.output is None: args.output = "flash." + ext else: drives = get_drives() From e8b7cee9d321d24467fe408f2915cc69a44bcc4d Mon Sep 17 00:00:00 2001 From: Ryan Date: Tue, 28 Sep 2021 03:46:10 +1000 Subject: [PATCH 137/595] SquishyTKL: Layouts cleanup (#14594) --- keyboards/ramonimbao/squishytkl/info.json | 802 ++++++++++--------- keyboards/ramonimbao/squishytkl/squishytkl.h | 170 ++-- 2 files changed, 497 insertions(+), 475 deletions(-) diff --git a/keyboards/ramonimbao/squishytkl/info.json b/keyboards/ramonimbao/squishytkl/info.json index caf45d6319..aa19c73fa8 100644 --- a/keyboards/ramonimbao/squishytkl/info.json +++ b/keyboards/ramonimbao/squishytkl/info.json @@ -5,404 +5,434 @@ "layouts": { "LAYOUT_ansi": { "layout": [ - {"x":0, "y":0.5}, - {"x":1.25, "y":0.5}, - {"x":2.25, "y":0.5}, - {"x":3.25, "y":0.5}, - {"x":4.25, "y":0.5}, - {"x":5.5, "y":0.5}, - {"x":6.5, "y":0.5}, - {"x":7.5, "y":0.5}, - {"x":8.5, "y":0.5}, - {"x":9.75, "y":0.5}, - {"x":10.75, "y":0.5}, - {"x":11.75, "y":0.5}, - {"x":12.75, "y":0.5}, - {"x":14, "y":0.5}, - {"x":15.25, "y":0.5}, - {"x":16.25, "y":0.5}, - {"x":17.25, "y":0.5}, - - {"x":0, "y":1.75}, - {"x":1, "y":1.75}, - {"x":2, "y":1.75}, - {"x":3, "y":1.75}, - {"x":4, "y":1.75}, - {"x":5, "y":1.75}, - {"x":6, "y":1.75}, - {"x":7, "y":1.75}, - {"x":8, "y":1.75}, - {"x":9, "y":1.75}, - {"x":10, "y":1.75}, - {"x":11, "y":1.75}, - {"x":12, "y":1.75}, - {"x":13, "y":1.75, "w":2}, - {"x":15.25, "y":1.75}, - {"x":16.25, "y":1.75}, - {"x":17.25, "y":1.75}, - - {"x":0, "y":2.75, "w":1.5}, - {"x":1.5, "y":2.75}, - {"x":2.5, "y":2.75}, - {"x":3.5, "y":2.75}, - {"x":4.5, "y":2.75}, - {"x":5.5, "y":2.75}, - {"x":6.5, "y":2.75}, - {"x":7.5, "y":2.75}, - {"x":8.5, "y":2.75}, - {"x":9.5, "y":2.75}, - {"x":10.5, "y":2.75}, - {"x":11.5, "y":2.75}, - {"x":12.5, "y":2.75}, - {"x":13.5, "y":2.75, "w":1.5}, - {"x":15.25, "y":2.75}, - {"x":16.25, "y":2.75}, - {"x":17.25, "y":2.75}, - - {"x":0, "y":3.75, "w":1.75}, - {"x":1.75, "y":3.75}, - {"x":2.75, "y":3.75}, - {"x":3.75, "y":3.75}, - {"x":4.75, "y":3.75}, - {"x":5.75, "y":3.75}, - {"x":6.75, "y":3.75}, - {"x":7.75, "y":3.75}, - {"x":8.75, "y":3.75}, - {"x":9.75, "y":3.75}, - {"x":10.75, "y":3.75}, - {"x":11.75, "y":3.75}, - {"x":12.75, "y":3.75, "w":2.25}, - - {"x":0, "y":4.75, "w":2.25}, - {"x":2.25, "y":4.75}, - {"x":3.25, "y":4.75}, - {"x":4.25, "y":4.75}, - {"x":5.25, "y":4.75}, - {"x":6.25, "y":4.75}, - {"x":7.25, "y":4.75}, - {"x":8.25, "y":4.75}, - {"x":9.25, "y":4.75}, - {"x":10.25, "y":4.75}, - {"x":11.25, "y":4.75}, - {"x":12.25, "y":4.75, "w":2.75}, - {"x":16.25, "y":4.75}, - - {"x":0, "y":5.75, "w":1.25}, - {"x":1.25, "y":5.75, "w":1.25}, - {"x":2.5, "y":5.75, "w":1.25}, - {"x":3.75, "y":5.75, "w":6.25}, - {"x":10, "y":5.75, "w":1.25}, - {"x":11.25, "y":5.75, "w":1.25}, - {"x":12.5, "y":5.75, "w":1.25}, - {"x":13.75, "y":5.75, "w":1.25}, - {"x":15.25, "y":5.75}, - {"x":16.25, "y":5.75}, - {"x":17.25, "y":5.75} + {"x": 0, "y": 0}, + + {"x": 1.25, "y": 0}, + {"x": 2.25, "y": 0}, + {"x": 3.25, "y": 0}, + {"x": 4.25, "y": 0}, + + {"x": 5.5, "y": 0}, + {"x": 6.5, "y": 0}, + {"x": 7.5, "y": 0}, + {"x": 8.5, "y": 0}, + + {"x": 9.75, "y": 0}, + {"x": 10.75, "y": 0}, + {"x": 11.75, "y": 0}, + {"x": 12.75, "y": 0}, + + {"x": 14, "y": 0}, + + {"x": 15.25, "y": 0}, + {"x": 16.25, "y": 0}, + {"x": 17.25, "y": 0}, + + {"x": 0, "y": 1.25}, + {"x": 1, "y": 1.25}, + {"x": 2, "y": 1.25}, + {"x": 3, "y": 1.25}, + {"x": 4, "y": 1.25}, + {"x": 5, "y": 1.25}, + {"x": 6, "y": 1.25}, + {"x": 7, "y": 1.25}, + {"x": 8, "y": 1.25}, + {"x": 9, "y": 1.25}, + {"x": 10, "y": 1.25}, + {"x": 11, "y": 1.25}, + {"x": 12, "y": 1.25}, + {"x": 13, "y": 1.25, "w": 2}, + + {"x": 15.25, "y": 1.25}, + {"x": 16.25, "y": 1.25}, + {"x": 17.25, "y": 1.25}, + + {"x": 0, "y": 2.25, "w": 1.5}, + {"x": 1.5, "y": 2.25}, + {"x": 2.5, "y": 2.25}, + {"x": 3.5, "y": 2.25}, + {"x": 4.5, "y": 2.25}, + {"x": 5.5, "y": 2.25}, + {"x": 6.5, "y": 2.25}, + {"x": 7.5, "y": 2.25}, + {"x": 8.5, "y": 2.25}, + {"x": 9.5, "y": 2.25}, + {"x": 10.5, "y": 2.25}, + {"x": 11.5, "y": 2.25}, + {"x": 12.5, "y": 2.25}, + {"x": 13.5, "y": 2.25, "w": 1.5}, + + {"x": 15.25, "y": 2.25}, + {"x": 16.25, "y": 2.25}, + {"x": 17.25, "y": 2.25}, + + {"x": 0, "y": 3.25, "w": 1.75}, + {"x": 1.75, "y": 3.25}, + {"x": 2.75, "y": 3.25}, + {"x": 3.75, "y": 3.25}, + {"x": 4.75, "y": 3.25}, + {"x": 5.75, "y": 3.25}, + {"x": 6.75, "y": 3.25}, + {"x": 7.75, "y": 3.25}, + {"x": 8.75, "y": 3.25}, + {"x": 9.75, "y": 3.25}, + {"x": 10.75, "y": 3.25}, + {"x": 11.75, "y": 3.25}, + {"x": 12.75, "y": 3.25, "w": 2.25}, + + {"x": 0, "y": 4.25, "w": 2.25}, + {"x": 2.25, "y": 4.25}, + {"x": 3.25, "y": 4.25}, + {"x": 4.25, "y": 4.25}, + {"x": 5.25, "y": 4.25}, + {"x": 6.25, "y": 4.25}, + {"x": 7.25, "y": 4.25}, + {"x": 8.25, "y": 4.25}, + {"x": 9.25, "y": 4.25}, + {"x": 10.25, "y": 4.25}, + {"x": 11.25, "y": 4.25}, + {"x": 12.25, "y": 4.25, "w": 2.75}, + + {"x": 16.25, "y": 4.25}, + + {"x": 0, "y": 5.25, "w": 1.25}, + {"x": 1.25, "y": 5.25, "w": 1.25}, + {"x": 2.5, "y": 5.25, "w": 1.25}, + {"x": 3.75, "y": 5.25, "w": 6.25}, + {"x": 10, "y": 5.25, "w": 1.25}, + {"x": 11.25, "y": 5.25, "w": 1.25}, + {"x": 12.5, "y": 5.25, "w": 1.25}, + {"x": 13.75, "y": 5.25, "w": 1.25}, + + {"x": 15.25, "y": 5.25}, + {"x": 16.25, "y": 5.25}, + {"x": 17.25, "y": 5.25} ] }, "LAYOUT_iso": { "layout": [ - {"x":0, "y":0.5}, - {"x":1.25, "y":0.5}, - {"x":2.25, "y":0.5}, - {"x":3.25, "y":0.5}, - {"x":4.25, "y":0.5}, - {"x":5.5, "y":0.5}, - {"x":6.5, "y":0.5}, - {"x":7.5, "y":0.5}, - {"x":8.5, "y":0.5}, - {"x":9.75, "y":0.5}, - {"x":10.75, "y":0.5}, - {"x":11.75, "y":0.5}, - {"x":12.75, "y":0.5}, - {"x":14, "y":0.5}, - {"x":15.25, "y":0.5}, - {"x":16.25, "y":0.5}, - {"x":17.25, "y":0.5}, - - {"x":0, "y":1.75}, - {"x":1, "y":1.75}, - {"x":2, "y":1.75}, - {"x":3, "y":1.75}, - {"x":4, "y":1.75}, - {"x":5, "y":1.75}, - {"x":6, "y":1.75}, - {"x":7, "y":1.75}, - {"x":8, "y":1.75}, - {"x":9, "y":1.75}, - {"x":10, "y":1.75}, - {"x":11, "y":1.75}, - {"x":12, "y":1.75}, - {"x":13, "y":1.75, "w":2}, - {"x":15.25, "y":1.75}, - {"x":16.25, "y":1.75}, - {"x":17.25, "y":1.75}, - - {"x":0, "y":2.75, "w":1.5}, - {"x":1.5, "y":2.75}, - {"x":2.5, "y":2.75}, - {"x":3.5, "y":2.75}, - {"x":4.5, "y":2.75}, - {"x":5.5, "y":2.75}, - {"x":6.5, "y":2.75}, - {"x":7.5, "y":2.75}, - {"x":8.5, "y":2.75}, - {"x":9.5, "y":2.75}, - {"x":10.5, "y":2.75}, - {"x":11.5, "y":2.75}, - {"x":12.5, "y":2.75}, - {"x":15.25, "y":2.75}, - {"x":16.25, "y":2.75}, - {"x":17.25, "y":2.75}, - - {"x":0, "y":3.75, "w":1.75}, - {"x":1.75, "y":3.75}, - {"x":2.75, "y":3.75}, - {"x":3.75, "y":3.75}, - {"x":4.75, "y":3.75}, - {"x":5.75, "y":3.75}, - {"x":6.75, "y":3.75}, - {"x":7.75, "y":3.75}, - {"x":8.75, "y":3.75}, - {"x":9.75, "y":3.75}, - {"x":10.75, "y":3.75}, - {"x":11.75, "y":3.75}, - {"x":12.75, "y":3.75}, - {"x":13.75, "y":2.75, "w":1.25, "h":2}, - - {"x":0, "y":4.75, "w":1.25}, - {"x":1.25, "y":4.75}, - {"x":2.25, "y":4.75}, - {"x":3.25, "y":4.75}, - {"x":4.25, "y":4.75}, - {"x":5.25, "y":4.75}, - {"x":6.25, "y":4.75}, - {"x":7.25, "y":4.75}, - {"x":8.25, "y":4.75}, - {"x":9.25, "y":4.75}, - {"x":10.25, "y":4.75}, - {"x":11.25, "y":4.75}, - {"x":12.25, "y":4.75, "w":2.75}, - {"x":16.25, "y":4.75}, - - {"x":0, "y":5.75, "w":1.25}, - {"x":1.25, "y":5.75, "w":1.25}, - {"x":2.5, "y":5.75, "w":1.25}, - {"x":3.75, "y":5.75, "w":6.25}, - {"x":10, "y":5.75, "w":1.25}, - {"x":11.25, "y":5.75, "w":1.25}, - {"x":12.5, "y":5.75, "w":1.25}, - {"x":13.75, "y":5.75, "w":1.25}, - {"x":15.25, "y":5.75}, - {"x":16.25, "y":5.75}, - {"x":17.25, "y":5.75} + {"x": 0, "y": 0}, + + {"x": 1.25, "y": 0}, + {"x": 2.25, "y": 0}, + {"x": 3.25, "y": 0}, + {"x": 4.25, "y": 0}, + + {"x": 5.5, "y": 0}, + {"x": 6.5, "y": 0}, + {"x": 7.5, "y": 0}, + {"x": 8.5, "y": 0}, + + {"x": 9.75, "y": 0}, + {"x": 10.75, "y": 0}, + {"x": 11.75, "y": 0}, + {"x": 12.75, "y": 0}, + + {"x": 14, "y": 0}, + + {"x": 15.25, "y": 0}, + {"x": 16.25, "y": 0}, + {"x": 17.25, "y": 0}, + + {"x": 0, "y": 1.25}, + {"x": 1, "y": 1.25}, + {"x": 2, "y": 1.25}, + {"x": 3, "y": 1.25}, + {"x": 4, "y": 1.25}, + {"x": 5, "y": 1.25}, + {"x": 6, "y": 1.25}, + {"x": 7, "y": 1.25}, + {"x": 8, "y": 1.25}, + {"x": 9, "y": 1.25}, + {"x": 10, "y": 1.25}, + {"x": 11, "y": 1.25}, + {"x": 12, "y": 1.25}, + {"x": 13, "y": 1.25, "w": 2}, + + {"x": 15.25, "y": 1.25}, + {"x": 16.25, "y": 1.25}, + {"x": 17.25, "y": 1.25}, + + {"x": 0, "y": 2.25, "w": 1.5}, + {"x": 1.5, "y": 2.25}, + {"x": 2.5, "y": 2.25}, + {"x": 3.5, "y": 2.25}, + {"x": 4.5, "y": 2.25}, + {"x": 5.5, "y": 2.25}, + {"x": 6.5, "y": 2.25}, + {"x": 7.5, "y": 2.25}, + {"x": 8.5, "y": 2.25}, + {"x": 9.5, "y": 2.25}, + {"x": 10.5, "y": 2.25}, + {"x": 11.5, "y": 2.25}, + {"x": 12.5, "y": 2.25}, + + {"x": 15.25, "y": 2.25}, + {"x": 16.25, "y": 2.25}, + {"x": 17.25, "y": 2.25}, + + {"x": 0, "y": 3.25, "w": 1.75}, + {"x": 1.75, "y": 3.25}, + {"x": 2.75, "y": 3.25}, + {"x": 3.75, "y": 3.25}, + {"x": 4.75, "y": 3.25}, + {"x": 5.75, "y": 3.25}, + {"x": 6.75, "y": 3.25}, + {"x": 7.75, "y": 3.25}, + {"x": 8.75, "y": 3.25}, + {"x": 9.75, "y": 3.25}, + {"x": 10.75, "y": 3.25}, + {"x": 11.75, "y": 3.25}, + {"x": 12.75, "y": 3.25}, + {"x": 13.75, "y": 2.25, "w": 1.25, "h": 2}, + + {"x": 0, "y": 4.25, "w": 1.25}, + {"x": 1.25, "y": 4.25}, + {"x": 2.25, "y": 4.25}, + {"x": 3.25, "y": 4.25}, + {"x": 4.25, "y": 4.25}, + {"x": 5.25, "y": 4.25}, + {"x": 6.25, "y": 4.25}, + {"x": 7.25, "y": 4.25}, + {"x": 8.25, "y": 4.25}, + {"x": 9.25, "y": 4.25}, + {"x": 10.25, "y": 4.25}, + {"x": 11.25, "y": 4.25}, + {"x": 12.25, "y": 4.25, "w": 2.75}, + + {"x": 16.25, "y": 4.25}, + + {"x": 0, "y": 5.25, "w": 1.25}, + {"x": 1.25, "y": 5.25, "w": 1.25}, + {"x": 2.5, "y": 5.25, "w": 1.25}, + {"x": 3.75, "y": 5.25, "w": 6.25}, + {"x": 10, "y": 5.25, "w": 1.25}, + {"x": 11.25, "y": 5.25, "w": 1.25}, + {"x": 12.5, "y": 5.25, "w": 1.25}, + {"x": 13.75, "y": 5.25, "w": 1.25}, + + {"x": 15.25, "y": 5.25}, + {"x": 16.25, "y": 5.25}, + {"x": 17.25, "y": 5.25} ] }, "LAYOUT_jis": { "layout": [ - {"x":0, "y":0}, - {"x":1.25, "y":0}, - {"x":2.25, "y":0}, - {"x":3.25, "y":0}, - {"x":4.25, "y":0}, - {"x":5.5, "y":0}, - {"x":6.5, "y":0}, - {"x":7.5, "y":0}, - {"x":8.5, "y":0}, - {"x":9.75, "y":0}, - {"x":10.75, "y":0}, - {"x":11.75, "y":0}, - {"x":12.75, "y":0}, - {"x":14, "y":0}, - {"x":15.25, "y":0}, - {"x":16.25, "y":0}, - {"x":17.25, "y":0}, - - {"x":0, "y":1.25}, - {"x":1, "y":1.25}, - {"x":2, "y":1.25}, - {"x":3, "y":1.25}, - {"x":4, "y":1.25}, - {"x":5, "y":1.25}, - {"x":6, "y":1.25}, - {"x":7, "y":1.25}, - {"x":8, "y":1.25}, - {"x":9, "y":1.25}, - {"x":10, "y":1.25}, - {"x":11, "y":1.25}, - {"x":12, "y":1.25}, - {"x":13, "y":1.25}, - {"x":14, "y":1.25}, - {"x":15.25, "y":1.25}, - {"x":16.25, "y":1.25}, - {"x":17.25, "y":1.25}, - - {"x":0, "y":2.25, "w":1.5}, - {"x":1.5, "y":2.25}, - {"x":2.5, "y":2.25}, - {"x":3.5, "y":2.25}, - {"x":4.5, "y":2.25}, - {"x":5.5, "y":2.25}, - {"x":6.5, "y":2.25}, - {"x":7.5, "y":2.25}, - {"x":8.5, "y":2.25}, - {"x":9.5, "y":2.25}, - {"x":10.5, "y":2.25}, - {"x":11.5, "y":2.25}, - {"x":12.5, "y":2.25}, - {"x":15.25, "y":2.25}, - {"x":16.25, "y":2.25}, - {"x":17.25, "y":2.25}, - - {"x":0, "y":3.25, "w":1.75}, - {"x":1.75, "y":3.25}, - {"x":2.75, "y":3.25}, - {"x":3.75, "y":3.25}, - {"x":4.75, "y":3.25}, - {"x":5.75, "y":3.25}, - {"x":6.75, "y":3.25}, - {"x":7.75, "y":3.25}, - {"x":8.75, "y":3.25}, - {"x":9.75, "y":3.25}, - {"x":10.75, "y":3.25}, - {"x":11.75, "y":3.25}, - {"x":12.75, "y":3.25}, - {"x":13.75, "y":2.25, "w":1.25, "h":2}, - - {"x":0, "y":4.25, "w":2.25}, - {"x":2.25, "y":4.25}, - {"x":3.25, "y":4.25}, - {"x":4.25, "y":4.25}, - {"x":5.25, "y":4.25}, - {"x":6.25, "y":4.25}, - {"x":7.25, "y":4.25}, - {"x":8.25, "y":4.25}, - {"x":9.25, "y":4.25}, - {"x":10.25, "y":4.25}, - {"x":11.25, "y":4.25}, - {"x":12.25, "y":4.25}, - {"x":13.25, "y":4.25, "w":1.75}, - {"x":16.25, "y":4.25}, - - {"x":0, "y":5.25, "w":1.5}, - {"x":1.5, "y":5.25}, - {"x":2.5, "y":5.25, "w":1.5}, - {"x":4, "y":5.25}, - {"x":5, "y":5.25}, - {"x":6, "y":5.25, "w":3}, - {"x":9, "y":5.25}, - {"x":10, "y":5.25}, - {"x":11, "y":5.25, "w":1.5}, - {"x":12.5, "y":5.25}, - {"x":13.5, "y":5.25, "w":1.5}, - {"x":15.25, "y":5.25}, - {"x":16.25, "y":5.25}, - {"x":17.25, "y":5.25} + {"x": 0, "y": 0}, + {"x": 1.25, "y": 0}, + {"x": 2.25, "y": 0}, + {"x": 3.25, "y": 0}, + {"x": 4.25, "y": 0}, + {"x": 5.5, "y": 0}, + {"x": 6.5, "y": 0}, + {"x": 7.5, "y": 0}, + {"x": 8.5, "y": 0}, + {"x": 9.75, "y": 0}, + {"x": 10.75, "y": 0}, + {"x": 11.75, "y": 0}, + {"x": 12.75, "y": 0}, + {"x": 14, "y": 0}, + {"x": 15.25, "y": 0}, + {"x": 16.25, "y": 0}, + {"x": 17.25, "y": 0}, + + {"x": 0, "y": 1.25}, + {"x": 1, "y": 1.25}, + {"x": 2, "y": 1.25}, + {"x": 3, "y": 1.25}, + {"x": 4, "y": 1.25}, + {"x": 5, "y": 1.25}, + {"x": 6, "y": 1.25}, + {"x": 7, "y": 1.25}, + {"x": 8, "y": 1.25}, + {"x": 9, "y": 1.25}, + {"x": 10, "y": 1.25}, + {"x": 11, "y": 1.25}, + {"x": 12, "y": 1.25}, + {"x": 13, "y": 1.25}, + {"x": 14, "y": 1.25}, + {"x": 15.25, "y": 1.25}, + {"x": 16.25, "y": 1.25}, + {"x": 17.25, "y": 1.25}, + + {"x": 0, "y": 2.25, "w": 1.5}, + {"x": 1.5, "y": 2.25}, + {"x": 2.5, "y": 2.25}, + {"x": 3.5, "y": 2.25}, + {"x": 4.5, "y": 2.25}, + {"x": 5.5, "y": 2.25}, + {"x": 6.5, "y": 2.25}, + {"x": 7.5, "y": 2.25}, + {"x": 8.5, "y": 2.25}, + {"x": 9.5, "y": 2.25}, + {"x": 10.5, "y": 2.25}, + {"x": 11.5, "y": 2.25}, + {"x": 12.5, "y": 2.25}, + {"x": 15.25, "y": 2.25}, + {"x": 16.25, "y": 2.25}, + {"x": 17.25, "y": 2.25}, + + {"x": 0, "y": 3.25, "w": 1.75}, + {"x": 1.75, "y": 3.25}, + {"x": 2.75, "y": 3.25}, + {"x": 3.75, "y": 3.25}, + {"x": 4.75, "y": 3.25}, + {"x": 5.75, "y": 3.25}, + {"x": 6.75, "y": 3.25}, + {"x": 7.75, "y": 3.25}, + {"x": 8.75, "y": 3.25}, + {"x": 9.75, "y": 3.25}, + {"x": 10.75, "y": 3.25}, + {"x": 11.75, "y": 3.25}, + {"x": 12.75, "y": 3.25}, + {"x": 13.75, "y": 2.25, "w": 1.25, "h": 2}, + + {"x": 0, "y": 4.25, "w": 2.25}, + {"x": 2.25, "y": 4.25}, + {"x": 3.25, "y": 4.25}, + {"x": 4.25, "y": 4.25}, + {"x": 5.25, "y": 4.25}, + {"x": 6.25, "y": 4.25}, + {"x": 7.25, "y": 4.25}, + {"x": 8.25, "y": 4.25}, + {"x": 9.25, "y": 4.25}, + {"x": 10.25, "y": 4.25}, + {"x": 11.25, "y": 4.25}, + {"x": 12.25, "y": 4.25}, + {"x": 13.25, "y": 4.25, "w": 1.75}, + + {"x": 16.25, "y": 4.25}, + + {"x": 0, "y": 5.25, "w": 1.5}, + {"x": 1.5, "y": 5.25}, + {"x": 2.5, "y": 5.25, "w": 1.5}, + {"x": 4, "y": 5.25}, + {"x": 5, "y": 5.25}, + {"x": 6, "y": 5.25, "w": 3}, + {"x": 9, "y": 5.25}, + {"x": 10, "y": 5.25}, + {"x": 11, "y": 5.25, "w": 1.5}, + {"x": 12.5, "y": 5.25}, + {"x": 13.5, "y": 5.25, "w": 1.5}, + + {"x": 15.25, "y": 5.25}, + {"x": 16.25, "y": 5.25}, + {"x": 17.25, "y": 5.25} ] }, "LAYOUT_all": { "layout": [ - {"x":0, "y":0.5}, - {"x":1.25, "y":0.5}, - {"x":2.25, "y":0.5}, - {"x":3.25, "y":0.5}, - {"x":4.25, "y":0.5}, - {"x":5.5, "y":0.5}, - {"x":6.5, "y":0.5}, - {"x":7.5, "y":0.5}, - {"x":8.5, "y":0.5}, - {"x":9.75, "y":0.5}, - {"x":10.75, "y":0.5}, - {"x":11.75, "y":0.5}, - {"x":12.75, "y":0.5}, - {"x":14, "y":0.5}, - {"x":15.25, "y":0.5}, - {"x":16.25, "y":0.5}, - {"x":17.25, "y":0.5}, - - {"x":0, "y":1.75}, - {"x":1, "y":1.75}, - {"x":2, "y":1.75}, - {"x":3, "y":1.75}, - {"x":4, "y":1.75}, - {"x":5, "y":1.75}, - {"x":6, "y":1.75}, - {"x":7, "y":1.75}, - {"x":8, "y":1.75}, - {"x":9, "y":1.75}, - {"x":10, "y":1.75}, - {"x":11, "y":1.75}, - {"x":12, "y":1.75}, - {"x":13, "y":1.75}, - {"x":14, "y":1.75}, - {"x":15.25, "y":1.75}, - {"x":16.25, "y":1.75}, - {"x":17.25, "y":1.75}, - - {"x":0, "y":2.75, "w":1.5}, - {"x":1.5, "y":2.75}, - {"x":2.5, "y":2.75}, - {"x":3.5, "y":2.75}, - {"x":4.5, "y":2.75}, - {"x":5.5, "y":2.75}, - {"x":6.5, "y":2.75}, - {"x":7.5, "y":2.75}, - {"x":8.5, "y":2.75}, - {"x":9.5, "y":2.75}, - {"x":10.5, "y":2.75}, - {"x":11.5, "y":2.75}, - {"x":12.5, "y":2.75}, - {"x":13.5, "y":2.75, "w":1.5}, - {"x":15.25, "y":2.75}, - {"x":16.25, "y":2.75}, - {"x":17.25, "y":2.75}, - - {"x":0, "y":3.75, "w":1.75}, - {"x":1.75, "y":3.75}, - {"x":2.75, "y":3.75}, - {"x":3.75, "y":3.75}, - {"x":4.75, "y":3.75}, - {"x":5.75, "y":3.75}, - {"x":6.75, "y":3.75}, - {"x":7.75, "y":3.75}, - {"x":8.75, "y":3.75}, - {"x":9.75, "y":3.75}, - {"x":10.75, "y":3.75}, - {"x":11.75, "y":3.75}, - {"x":12.75, "y":3.75, "w":2.25}, - - {"x":0, "y":4.75, "w":1.25}, - {"x":1.25, "y":4.75}, - {"x":2.25, "y":4.75}, - {"x":3.25, "y":4.75}, - {"x":4.25, "y":4.75}, - {"x":5.25, "y":4.75}, - {"x":6.25, "y":4.75}, - {"x":7.25, "y":4.75}, - {"x":8.25, "y":4.75}, - {"x":9.25, "y":4.75}, - {"x":10.25, "y":4.75}, - {"x":11.25, "y":4.75}, - {"x":12.25, "y":4.75, "w":1.75}, - {"x":14, "y":4.75}, - {"x":16.25, "y":4.75}, - - {"x":0, "y":5.75, "w":1.25}, - {"x":1.25, "y":5.75, "w":1.25}, - {"x":2.5, "y":5.75, "w":1.25}, - {"x":3.75, "y":5.75, "w":2.5}, - {"x":6.25, "y":5.75}, - {"x":7.25, "y":5.75, "w":2.75}, - {"x":10, "y":5.75, "w":1.25}, - {"x":11.25, "y":5.75, "w":1.25}, - {"x":12.5, "y":5.75, "w":1.25}, - {"x":13.75, "y":5.75, "w":1.25}, - {"x":15.25, "y":5.75}, - {"x":16.25, "y":5.75}, - {"x":17.25, "y":5.75}, - - {"x":18.5, "y":0}, - {"x":18.5, "y":1} + {"x": 0, "y": 0.5}, + + {"x": 1.25, "y": 0.5}, + {"x": 2.25, "y": 0.5}, + {"x": 3.25, "y": 0.5}, + {"x": 4.25, "y": 0.5}, + + {"x": 5.5, "y": 0.5}, + {"x": 6.5, "y": 0.5}, + {"x": 7.5, "y": 0.5}, + {"x": 8.5, "y": 0.5}, + + {"x": 9.75, "y": 0.5}, + {"x": 10.75, "y": 0.5}, + {"x": 11.75, "y": 0.5}, + {"x": 12.75, "y": 0.5}, + + {"x": 14, "y": 0.5}, + + {"x": 15.25, "y": 0.5}, + {"x": 16.25, "y": 0.5}, + {"x": 17.25, "y": 0.5}, + + {"x": 0, "y": 1.75}, + {"x": 1, "y": 1.75}, + {"x": 2, "y": 1.75}, + {"x": 3, "y": 1.75}, + {"x": 4, "y": 1.75}, + {"x": 5, "y": 1.75}, + {"x": 6, "y": 1.75}, + {"x": 7, "y": 1.75}, + {"x": 8, "y": 1.75}, + {"x": 9, "y": 1.75}, + {"x": 10, "y": 1.75}, + {"x": 11, "y": 1.75}, + {"x": 12, "y": 1.75}, + {"x": 13, "y": 1.75}, + {"x": 14, "y": 1.75}, + + {"x": 15.25, "y": 1.75}, + {"x": 16.25, "y": 1.75}, + {"x": 17.25, "y": 1.75}, + + {"x": 0, "y": 2.75, "w": 1.5}, + {"x": 1.5, "y": 2.75}, + {"x": 2.5, "y": 2.75}, + {"x": 3.5, "y": 2.75}, + {"x": 4.5, "y": 2.75}, + {"x": 5.5, "y": 2.75}, + {"x": 6.5, "y": 2.75}, + {"x": 7.5, "y": 2.75}, + {"x": 8.5, "y": 2.75}, + {"x": 9.5, "y": 2.75}, + {"x": 10.5, "y": 2.75}, + {"x": 11.5, "y": 2.75}, + {"x": 12.5, "y": 2.75}, + {"x": 13.5, "y": 2.75, "w": 1.5}, + + {"x": 15.25, "y": 2.75}, + {"x": 16.25, "y": 2.75}, + {"x": 17.25, "y": 2.75}, + + {"x": 0, "y": 3.75, "w": 1.75}, + {"x": 1.75, "y": 3.75}, + {"x": 2.75, "y": 3.75}, + {"x": 3.75, "y": 3.75}, + {"x": 4.75, "y": 3.75}, + {"x": 5.75, "y": 3.75}, + {"x": 6.75, "y": 3.75}, + {"x": 7.75, "y": 3.75}, + {"x": 8.75, "y": 3.75}, + {"x": 9.75, "y": 3.75}, + {"x": 10.75, "y": 3.75}, + {"x": 11.75, "y": 3.75}, + {"x": 12.75, "y": 3.75, "w": 2.25}, + + {"x": 0, "y": 4.75, "w": 1.25}, + {"x": 1.25, "y": 4.75}, + {"x": 2.25, "y": 4.75}, + {"x": 3.25, "y": 4.75}, + {"x": 4.25, "y": 4.75}, + {"x": 5.25, "y": 4.75}, + {"x": 6.25, "y": 4.75}, + {"x": 7.25, "y": 4.75}, + {"x": 8.25, "y": 4.75}, + {"x": 9.25, "y": 4.75}, + {"x": 10.25, "y": 4.75}, + {"x": 11.25, "y": 4.75}, + {"x": 12.25, "y": 4.75, "w": 1.75}, + {"x": 14, "y": 4.75}, + + {"x": 16.25, "y": 4.75}, + + {"x": 0, "y": 5.75, "w": 1.25}, + {"x": 1.25, "y": 5.75, "w": 1.25}, + {"x": 2.5, "y": 5.75, "w": 1.25}, + {"x": 3.75, "y": 5.75}, + {"x": 4.75, "y": 5.75, "w": 1.5}, + {"x": 6.25, "y": 5.75}, + {"x": 7.25, "y": 5.75, "w": 2.75}, + {"x": 10, "y": 5.75, "w": 1.25}, + {"x": 11.25, "y": 5.75, "w": 1.25}, + {"x": 12.5, "y": 5.75, "w": 1.25}, + {"x": 13.75, "y": 5.75, "w": 1.25}, + + {"x": 15.25, "y": 5.75}, + {"x": 16.25, "y": 5.75}, + {"x": 17.25, "y": 5.75}, + + {"x": 18.5, "y": 0}, + {"x": 18.5, "y": 1} ] } } diff --git a/keyboards/ramonimbao/squishytkl/squishytkl.h b/keyboards/ramonimbao/squishytkl/squishytkl.h index 53d91c27ed..204d497a57 100644 --- a/keyboards/ramonimbao/squishytkl/squishytkl.h +++ b/keyboards/ramonimbao/squishytkl/squishytkl.h @@ -30,106 +30,98 @@ #define ___ KC_NO #define LAYOUT_ansi( \ - k00, k01, k02, k03, k04, k10, k11, k12, k13, k20, k21, k22, k23, k24, k3k, k3l, k3m, \ - k85, k86, k87, k88, k89, k8a, k8b, k8c, k8d, k8e, k8f, k8g, k8h, k8i, k4k, k4l, k4m, \ - k95, k96, k97, k98, k99, k9a, k9b, k9c, k9d, k9e, k9f, k9g, k9h, k9j, k5k, k5l, k5m, \ - ka5, ka6, ka7, ka8, ka9, kaa, kab, kac, kad, kae, kaf, kag, kai, \ - kb5, kb7, kb8, kb9, kba, kbb, kbc, kbd, kbe, kbf, kbg, kbi, k6l, \ - kc5, kc6, kc7, kcd, kcf, kcg, kch, kci, k7k, k7l, k7m \ + k00, k01, k02, k03, k04, k10, k11, k12, k13, k20, k21, k22, k23, k24, k3K, k3L, k3M, \ + k85, k86, k87, k88, k89, k8A, k8B, k8C, k8D, k8E, k8F, k8G, k8H, k8I, k4K, k4L, k4M, \ + k95, k96, k97, k98, k99, k9A, k9B, k9C, k9D, k9E, k9F, k9G, k9H, k9J, k5K, k5L, k5M, \ + kA5, kA6, kA7, kA8, kA9, kAA, kAB, kAC, kAD, kAE, kAF, kAG, kAI, \ + kB5, kB7, kB8, kB9, kBA, kBB, kBC, kBD, kBE, kBF, kBG, kBI, k6O, \ + kC5, kC6, kC7, kCD, kCF, kCG, kCI, kCJ, k7N, k7O, k7P \ ) { \ - /* 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 */ \ - /* 0 1 2 3 4 5 6 7 8 9 a b c d e f g h i j k l m n o p */ \ - /* 0 | 0 */ { k00, k01, k02, k03, k04, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ }, \ - /* 1 | 1 */ { k10, k11, k12, k13, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ }, \ - /* 2 | 2 */ { k20, k21, k22, k23, k24, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ }, \ - /* 3 | 3 */ { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, k3k, k3l, k3m, ___, ___, ___ }, \ - /* 4 | 4 */ { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, k4k, k4l, k4m, ___, ___, ___ }, \ - /* 5 | 5 */ { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, k5k, k5l, k5m, ___, ___, ___ }, \ - /* 6 | 6 */ { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, k6l, ___ }, \ - /* 7 | 7 */ { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, k7k, k7l, k7m }, \ - /* 8 | 8 */ { ___, ___, ___, ___, ___, k85, k86, k87, k88, k89, k8a, k8b, k8c, k8d, k8e, k8f, k8g, k8h, k8i, ___, ___, ___, ___, ___, ___, ___ }, \ - /* 9 | 9 */ { ___, ___, ___, ___, ___, k95, k96, k97, k98, k99, k9a, k9b, k9c, k9d, k9e, k9f, k9g, k9h, ___, k9j, ___, ___, ___, ___, ___, ___ }, \ - /* 10 | a */ { ___, ___, ___, ___, ___, ka5, ka6, ka7, ka8, ka9, kaa, kab, kac, kad, kae, kaf, kag, ___, kai, ___, ___, ___, ___, ___, ___, ___ }, \ - /* 11 | b */ { ___, ___, ___, ___, ___, kb5, ___, kb7, kb8, kb9, kba, kbb, kbc, kbd, kbe, kbf, kbg, ___, kbi, ___, ___, ___, ___, ___, ___, ___ }, \ - /* 12 | c */ { ___, ___, ___, ___, ___, kc5, kc6, kc7, ___, ___, ___, ___, ___, kcd, ___, kcf, kcg, ___, kch, kci, ___, ___, ___, ___, ___, ___ }, \ - /* 13 | c */ { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ }, \ + { k00, k01, k02, k03, k04, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ }, \ + { k10, k11, k12, k13, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ }, \ + { k20, k21, k22, k23, k24, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ }, \ + { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, k3K, k3L, k3M, ___, ___, ___ }, \ + { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, k4K, k4L, k4M, ___, ___, ___ }, \ + { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, k5K, k5L, k5M, ___, ___, ___ }, \ + { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, k6O, ___ }, \ + { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, k7N, k7O, k7P }, \ + { ___, ___, ___, ___, ___, k85, k86, k87, k88, k89, k8A, k8B, k8C, k8D, k8E, k8F, k8G, k8H, k8I, ___, ___, ___, ___, ___, ___, ___ }, \ + { ___, ___, ___, ___, ___, k95, k96, k97, k98, k99, k9A, k9B, k9C, k9D, k9E, k9F, k9G, k9H, ___, k9J, ___, ___, ___, ___, ___, ___ }, \ + { ___, ___, ___, ___, ___, kA5, kA6, kA7, kA8, kA9, kAA, kAB, kAC, kAD, kAE, kAF, kAG, ___, kAI, ___, ___, ___, ___, ___, ___, ___ }, \ + { ___, ___, ___, ___, ___, kB5, ___, kB7, kB8, kB9, kBA, kBB, kBC, kBD, kBE, kBF, kBG, ___, kBI, ___, ___, ___, ___, ___, ___, ___ }, \ + { ___, ___, ___, ___, ___, kC5, kC6, kC7, ___, ___, ___, ___, ___, kCD, ___, kCF, kCG, ___, kCI, kCJ, ___, ___, ___, ___, ___, ___ }, \ + { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ } \ } #define LAYOUT_iso( \ - k00, k01, k02, k03, k04, k10, k11, k12, k13, k20, k21, k22, k23, k24, k3k, k3l, k3m, \ - k85, k86, k87, k88, k89, k8a, k8b, k8c, k8d, k8e, k8f, k8g, k8h, k8i, k4k, k4l, k4m, \ - k95, k96, k97, k98, k99, k9a, k9b, k9c, k9d, k9e, k9f, k9g, k9h, k5k, k5l, k5m, \ - ka5, ka6, ka7, ka8, ka9, kaa, kab, kac, kad, kae, kaf, kag, kai, k9j, \ - kb5, kb6, kb7, kb8, kb9, kba, kbb, kbc, kbd, kbe, kbf, kbg, kbi, k6l, \ - kc5, kc6, kc7, kcd, kcf, kcg, kch, kci, k7k, k7l, k7m \ + k00, k01, k02, k03, k04, k10, k11, k12, k13, k20, k21, k22, k23, k24, k3K, k3L, k3M, \ + k85, k86, k87, k88, k89, k8A, k8B, k8C, k8D, k8E, k8F, k8G, k8H, k8I, k4K, k4L, k4M, \ + k95, k96, k97, k98, k99, k9A, k9B, k9C, k9D, k9E, k9F, k9G, k9H, k5K, k5L, k5M, \ + kA5, kA6, kA7, kA8, kA9, kAA, kAB, kAC, kAD, kAE, kAF, kAG, kAI, k9J, \ + kB5, kB6, kB7, kB8, kB9, kBA, kBB, kBC, kBD, kBE, kBF, kBG, kBI, k6O, \ + kC5, kC6, kC7, kCD, kCF, kCG, kCI, kCJ, k7N, k7O, k7P \ ) { \ - /* 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 */ \ - /* 0 1 2 3 4 5 6 7 8 9 a b c d e f g h i j k l m n o p */ \ - /* 0 | 0 */ { k00, k01, k02, k03, k04, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ }, \ - /* 1 | 1 */ { k10, k11, k12, k13, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ }, \ - /* 2 | 2 */ { k20, k21, k22, k23, k24, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ }, \ - /* 3 | 3 */ { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, k3k, k3l, k3m, ___, ___, ___ }, \ - /* 4 | 4 */ { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, k4k, k4l, k4m, ___, ___, ___ }, \ - /* 5 | 5 */ { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, k5k, k5l, k5m, ___, ___, ___ }, \ - /* 6 | 6 */ { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, k6l, ___ }, \ - /* 7 | 7 */ { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, k7k, k7l, k7m }, \ - /* 8 | 8 */ { ___, ___, ___, ___, ___, k85, k86, k87, k88, k89, k8a, k8b, k8c, k8d, k8e, k8f, k8g, k8h, k8i, ___, ___, ___, ___, ___, ___, ___ }, \ - /* 9 | 9 */ { ___, ___, ___, ___, ___, k95, k96, k97, k98, k99, k9a, k9b, k9c, k9d, k9e, k9f, k9g, k9h, ___, k9j, ___, ___, ___, ___, ___, ___ }, \ - /* 10 | a */ { ___, ___, ___, ___, ___, ka5, ka6, ka7, ka8, ka9, kaa, kab, kac, kad, kae, kaf, kag, ___, kai, ___, ___, ___, ___, ___, ___, ___ }, \ - /* 11 | b */ { ___, ___, ___, ___, ___, kb5, kb6, kb7, kb8, kb9, kba, kbb, kbc, kbd, kbe, kbf, kbg, ___, kbi, ___, ___, ___, ___, ___, ___, ___ }, \ - /* 12 | c */ { ___, ___, ___, ___, ___, kc5, kc6, kc7, ___, ___, ___, ___, ___, kcd, ___, kcf, kcg, ___, kch, kci, ___, ___, ___, ___, ___, ___ }, \ - /* 13 | c */ { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ }, \ + { k00, k01, k02, k03, k04, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ }, \ + { k10, k11, k12, k13, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ }, \ + { k20, k21, k22, k23, k24, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ }, \ + { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, k3K, k3L, k3M, ___, ___, ___ }, \ + { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, k4K, k4L, k4M, ___, ___, ___ }, \ + { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, k5K, k5L, k5M, ___, ___, ___ }, \ + { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, k6O, ___ }, \ + { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, k7N, k7O, k7P }, \ + { ___, ___, ___, ___, ___, k85, k86, k87, k88, k89, k8A, k8B, k8C, k8D, k8E, k8F, k8G, k8H, k8I, ___, ___, ___, ___, ___, ___, ___ }, \ + { ___, ___, ___, ___, ___, k95, k96, k97, k98, k99, k9A, k9B, k9C, k9D, k9E, k9F, k9G, k9H, ___, k9J, ___, ___, ___, ___, ___, ___ }, \ + { ___, ___, ___, ___, ___, kA5, kA6, kA7, kA8, kA9, kAA, kAB, kAC, kAD, kAE, kAF, kAG, ___, kAI, ___, ___, ___, ___, ___, ___, ___ }, \ + { ___, ___, ___, ___, ___, kB5, kB6, kB7, kB8, kB9, kBA, kBB, kBC, kBD, kBE, kBF, kBG, ___, kBI, ___, ___, ___, ___, ___, ___, ___ }, \ + { ___, ___, ___, ___, ___, kC5, kC6, kC7, ___, ___, ___, ___, ___, kCD, ___, kCF, kCG, ___, kCI, kCJ, ___, ___, ___, ___, ___, ___ }, \ + { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ } \ } #define LAYOUT_jis( \ - k00, k01, k02, k03, k04, k10, k11, k12, k13, k20, k21, k22, k23, k24, k3k, k3l, k3m, \ - k85, k86, k87, k88, k89, k8a, k8b, k8c, k8d, k8e, k8f, k8g, k8h, k8i, k8j, k4k, k4l, k4m, \ - k95, k96, k97, k98, k99, k9a, k9b, k9c, k9d, k9e, k9f, k9g, k9h, k5k, k5l, k5m, \ - ka5, ka6, ka7, ka8, ka9, kaa, kab, kac, kad, kae, kaf, kag, kai, k9j, \ - kb5, kb7, kb8, kb9, kba, kbb, kbc, kbd, kbe, kbf, kbg, kbi, kbj, k6l, \ - kc5, kc6, kc7, kc8, kc9, kcd, kce, kcf, kcg, kch, kci, k7k, k7l, k7m \ + k00, k01, k02, k03, k04, k10, k11, k12, k13, k20, k21, k22, k23, k24, k3K, k3L, k3M, \ + k85, k86, k87, k88, k89, k8A, k8B, k8C, k8D, k8E, k8F, k8G, k8H, k8I, k8J, k4K, k4L, k4M, \ + k95, k96, k97, k98, k99, k9A, k9B, k9C, k9D, k9E, k9F, k9G, k9H, k5K, k5L, k5M, \ + kA5, kA6, kA7, kA8, kA9, kAA, kAB, kAC, kAD, kAE, kAF, kAG, kAI, k9J, \ + kB5, kB7, kB8, kB9, kBA, kBB, kBC, kBD, kBE, kBF, kBG, kBI, kBJ, k6O, \ + kC5, kC6, kC7, kC8, kC9, kCD, kCE, kCF, kCG, kCI, kCJ, k7N, k7O, k7P \ ) { \ - /* 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 */ \ - /* 0 1 2 3 4 5 6 7 8 9 a b c d e f g h i j k l m n o p */ \ - /* 0 | 0 */ { k00, k01, k02, k03, k04, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ }, \ - /* 1 | 1 */ { k10, k11, k12, k13, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ }, \ - /* 2 | 2 */ { k20, k21, k22, k23, k24, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ }, \ - /* 3 | 3 */ { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, k3k, k3l, k3m, ___, ___, ___ }, \ - /* 4 | 4 */ { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, k4k, k4l, k4m, ___, ___, ___ }, \ - /* 5 | 5 */ { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, k5k, k5l, k5m, ___, ___, ___ }, \ - /* 6 | 6 */ { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, k6l, ___ }, \ - /* 7 | 7 */ { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, k7k, k7l, k7m }, \ - /* 8 | 8 */ { ___, ___, ___, ___, ___, k85, k86, k87, k88, k89, k8a, k8b, k8c, k8d, k8e, k8f, k8g, k8h, k8i, k8j, ___, ___, ___, ___, ___, ___ }, \ - /* 9 | 9 */ { ___, ___, ___, ___, ___, k95, k96, k97, k98, k99, k9a, k9b, k9c, k9d, k9e, k9f, k9g, k9h, ___, k9j, ___, ___, ___, ___, ___, ___ }, \ - /* 10 | a */ { ___, ___, ___, ___, ___, ka5, ka6, ka7, ka8, ka9, kaa, kab, kac, kad, kae, kaf, kag, ___, kai, ___, ___, ___, ___, ___, ___, ___ }, \ - /* 11 | b */ { ___, ___, ___, ___, ___, kb5, ___, kb7, kb8, kb9, kba, kbb, kbc, kbd, kbe, kbf, kbg, ___, kbi, kbj, ___, ___, ___, ___, ___, ___ }, \ - /* 12 | c */ { ___, ___, ___, ___, ___, kc5, kc6, kc7, kc8, kc9, ___, ___, ___, kcd, kce, kcf, kcg, ___, kch, kci, ___, ___, ___, ___, ___, ___ }, \ - /* 13 | c */ { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ }, \ + { k00, k01, k02, k03, k04, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ }, \ + { k10, k11, k12, k13, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ }, \ + { k20, k21, k22, k23, k24, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ }, \ + { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, k3K, k3L, k3M, ___, ___, ___ }, \ + { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, k4K, k4L, k4M, ___, ___, ___ }, \ + { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, k5K, k5L, k5M, ___, ___, ___ }, \ + { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, k6O, ___ }, \ + { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, k7N, k7O, k7P }, \ + { ___, ___, ___, ___, ___, k85, k86, k87, k88, k89, k8A, k8B, k8C, k8D, k8E, k8F, k8G, k8H, k8I, k8J, ___, ___, ___, ___, ___, ___ }, \ + { ___, ___, ___, ___, ___, k95, k96, k97, k98, k99, k9A, k9B, k9C, k9D, k9E, k9F, k9G, k9H, ___, k9J, ___, ___, ___, ___, ___, ___ }, \ + { ___, ___, ___, ___, ___, kA5, kA6, kA7, kA8, kA9, kAA, kAB, kAC, kAD, kAE, kAF, kAG, ___, kAI, ___, ___, ___, ___, ___, ___, ___ }, \ + { ___, ___, ___, ___, ___, kB5, ___, kB7, kB8, kB9, kBA, kBB, kBC, kBD, kBE, kBF, kBG, ___, kBI, kBJ, ___, ___, ___, ___, ___, ___ }, \ + { ___, ___, ___, ___, ___, kC5, kC6, kC7, kC8, kC9, ___, ___, ___, kCD, kCE, kCF, kCG, ___, kCI, kCJ, ___, ___, ___, ___, ___, ___ }, \ + { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ } \ } #define LAYOUT_all( \ - k00, k01, k02, k03, k04, k10, k11, k12, k13, k20, k21, k22, k23, k24, k3k, k3l, k3m, \ - k85, k86, k87, k88, k89, k8a, k8b, k8c, k8d, k8e, k8f, k8g, k8h, k8i, k8j, k4k, k4l, k4m, \ - k95, k96, k97, k98, k99, k9a, k9b, k9c, k9d, k9e, k9f, k9g, k9h, k9j, k5k, k5l, k5m, \ - ka5, ka6, ka7, ka8, ka9, kaa, kab, kac, kad, kae, kaf, kag, kai, \ - kb5, kb6, kb7, kb8, kb9, kba, kbb, kbc, kbd, kbe, kbf, kbg, kbi, kbj, k6l, \ - kc5, kc6, kc7, kc8, kc9, kcd, kce, kcf, kcg, kch, kci, k7k, k7l, k7m, \ - kc0, kc1 \ + k00, k01, k02, k03, k04, k10, k11, k12, k13, k20, k21, k22, k23, k24, k3K, k3L, k3M, \ + k85, k86, k87, k88, k89, k8A, k8B, k8C, k8D, k8E, k8F, k8G, k8H, k8I, k8J, k4K, k4L, k4M, \ + k95, k96, k97, k98, k99, k9A, k9B, k9C, k9D, k9E, k9F, k9G, k9H, k9J, k5K, k5L, k5M, \ + kA5, kA6, kA7, kA8, kA9, kAA, kAB, kAC, kAD, kAE, kAF, kAG, kAI, \ + kB5, kB6, kB7, kB8, kB9, kBA, kBB, kBC, kBD, kBE, kBF, kBG, kBI, kBJ, k6O, \ + kC5, kC6, kC7, kC8, kC9, kCD, kCE, kCF, kCG, kCI, kCJ, k7N, k7O, k7P, \ + kD0, kD1 \ ) { \ - /* 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 */ \ - /* 0 1 2 3 4 5 6 7 8 9 a b c d e f g h i j k l m n o p */ \ - /* 0 | 0 */ { k00, k01, k02, k03, k04, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ }, \ - /* 1 | 1 */ { k10, k11, k12, k13, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ }, \ - /* 2 | 2 */ { k20, k21, k22, k23, k24, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ }, \ - /* 3 | 3 */ { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, k3k, k3l, k3m, ___, ___, ___ }, \ - /* 4 | 4 */ { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, k4k, k4l, k4m, ___, ___, ___ }, \ - /* 5 | 5 */ { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, k5k, k5l, k5m, ___, ___, ___ }, \ - /* 6 | 6 */ { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, k6l, ___ }, \ - /* 7 | 7 */ { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, k7k, k7l, k7m }, \ - /* 8 | 8 */ { ___, ___, ___, ___, ___, k85, k86, k87, k88, k89, k8a, k8b, k8c, k8d, k8e, k8f, k8g, k8h, k8i, k8j, ___, ___, ___, ___, ___, ___ }, \ - /* 9 | 9 */ { ___, ___, ___, ___, ___, k95, k96, k97, k98, k99, k9a, k9b, k9c, k9d, k9e, k9f, k9g, k9h, ___, k9j, ___, ___, ___, ___, ___, ___ }, \ - /* 10 | a */ { ___, ___, ___, ___, ___, ka5, ka6, ka7, ka8, ka9, kaa, kab, kac, kad, kae, kaf, kag, ___, kai, ___, ___, ___, ___, ___, ___, ___ }, \ - /* 11 | b */ { ___, ___, ___, ___, ___, kb5, kb6, kb7, kb8, kb9, kba, kbb, kbc, kbd, kbe, kbf, kbg, ___, kbi, kbj, ___, ___, ___, ___, ___, ___ }, \ - /* 12 | c */ { ___, ___, ___, ___, ___, kc5, kc6, kc7, kc8, kc9, ___, ___, ___, kcd, kce, kcf, kcg, ___, kch, kci, ___, ___, ___, ___, ___, ___ }, \ - /* 13 | c */ { kc0, kc1, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ }, \ + { k00, k01, k02, k03, k04, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ }, \ + { k10, k11, k12, k13, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ }, \ + { k20, k21, k22, k23, k24, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ }, \ + { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, k3K, k3L, k3M, ___, ___, ___ }, \ + { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, k4K, k4L, k4M, ___, ___, ___ }, \ + { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, k5K, k5L, k5M, ___, ___, ___ }, \ + { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, k6O, ___ }, \ + { ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, k7N, k7O, k7P }, \ + { ___, ___, ___, ___, ___, k85, k86, k87, k88, k89, k8A, k8B, k8C, k8D, k8E, k8F, k8G, k8H, k8I, k8J, ___, ___, ___, ___, ___, ___ }, \ + { ___, ___, ___, ___, ___, k95, k96, k97, k98, k99, k9A, k9B, k9C, k9D, k9E, k9F, k9G, k9H, ___, k9J, ___, ___, ___, ___, ___, ___ }, \ + { ___, ___, ___, ___, ___, kA5, kA6, kA7, kA8, kA9, kAA, kAB, kAC, kAD, kAE, kAF, kAG, ___, kAI, ___, ___, ___, ___, ___, ___, ___ }, \ + { ___, ___, ___, ___, ___, kB5, kB6, kB7, kB8, kB9, kBA, kBB, kBC, kBD, kBE, kBF, kBG, ___, kBI, kBJ, ___, ___, ___, ___, ___, ___ }, \ + { ___, ___, ___, ___, ___, kC5, kC6, kC7, kC8, kC9, ___, ___, ___, kCD, kCE, kCF, kCG, ___, kCI, kCJ, ___, ___, ___, ___, ___, ___ }, \ + { kD0, kD1, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___, ___ } \ } From ae993dc068b18f87174a8e313d84fcf88281147f Mon Sep 17 00:00:00 2001 From: Ryan Date: Tue, 28 Sep 2021 03:50:06 +1000 Subject: [PATCH 138/595] Zinc: Clean up LTO rules (#14597) --- keyboards/zinc/keymaps/default/rules.mk | 6 +----- keyboards/zinc/keymaps/ginjake/rules.mk | 6 +----- keyboards/zinc/keymaps/monks/rules.mk | 6 +----- keyboards/zinc/keymaps/toshi0383/rules.mk | 6 +----- 4 files changed, 4 insertions(+), 20 deletions(-) diff --git a/keyboards/zinc/keymaps/default/rules.mk b/keyboards/zinc/keymaps/default/rules.mk index 883f0fc603..5cdd1c81aa 100644 --- a/keyboards/zinc/keymaps/default/rules.mk +++ b/keyboards/zinc/keymaps/default/rules.mk @@ -14,6 +14,7 @@ AUDIO_ENABLE = no # Audio output UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. SWAP_HANDS_ENABLE = no # Enable one-hand typing +LTO_ENABLE = no # if firmware size over limit, try this option define ZINC_CUSTOMISE_MSG $(info Zinc customize) @@ -35,7 +36,6 @@ RGB_MATRIX = no # RGB LED Matrix RGB_MATRIX_SPLIT_RIGHT = no # RGB Matrix for RIGHT Hand LED_ANIMATIONS = yes # LED animations IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone) -Link_Time_Optimization = no # if firmware size over limit, try this option #### LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE. #### Do not enable these with audio at the same time. @@ -121,10 +121,6 @@ ifeq ($(strip $(RGB_MATRIX_SPLIT_RIGHT)), yes) OPT_DEFS += -DRGB_MATRIX_SPLIT_RIGHT endif -ifeq ($(strip $(Link_Time_Optimization)),yes) - EXTRAFLAGS += -flto -DUSE_Link_Time_Optimization -endif - # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/zinc/keymaps/ginjake/rules.mk b/keyboards/zinc/keymaps/ginjake/rules.mk index 63e5227ef9..f2cb3633c6 100644 --- a/keyboards/zinc/keymaps/ginjake/rules.mk +++ b/keyboards/zinc/keymaps/ginjake/rules.mk @@ -15,6 +15,7 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. SWAP_HANDS_ENABLE = no # Enable one-hand typing +LTO_ENABLE = no # if firmware size over limit, try this option define ZINC_CUSTOMISE_MSG $(info Zinc customize) @@ -33,7 +34,6 @@ LED_BOTH_ENABLE = no # LED backlight and underglow LED_RGB_CONT = no # LED continuous backlight or/and underglow between left Zinc and right Zinc LED_ANIMATIONS = yes # LED animations IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone) -Link_Time_Optimization = no # if firmware size over limit, try this option #### LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE. #### Do not enable these with audio at the same time. @@ -104,10 +104,6 @@ ifeq ($(strip $(LED_ANIMATIONS)), yes) endif -ifeq ($(strip $(Link_Time_Optimization)),yes) - EXTRAFLAGS += -flto -DUSE_Link_Time_Optimization -endif - # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/zinc/keymaps/monks/rules.mk b/keyboards/zinc/keymaps/monks/rules.mk index d8ec4497e7..46646f919c 100644 --- a/keyboards/zinc/keymaps/monks/rules.mk +++ b/keyboards/zinc/keymaps/monks/rules.mk @@ -15,6 +15,7 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. SWAP_HANDS_ENABLE = no # Enable one-hand typing +LTO_ENABLE = no # if firmware size over limit, try this option define ZINC_CUSTOMISE_MSG $(info Zinc customize) @@ -33,7 +34,6 @@ LED_BOTH_ENABLE = no # LED backlight and underglow LED_RGB_CONT = no # LED continuous backlight or/and underglow between left Zinc and right Zinc LED_ANIMATIONS = yes # LED animations IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone) -Link_Time_Optimization = no # if firmware size over limit, try this option #### LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE. #### Do not enable these with audio at the same time. @@ -104,10 +104,6 @@ ifeq ($(strip $(LED_ANIMATIONS)), yes) endif -ifeq ($(strip $(Link_Time_Optimization)),yes) - EXTRAFLAGS += -flto -DUSE_Link_Time_Optimization -endif - # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/zinc/keymaps/toshi0383/rules.mk b/keyboards/zinc/keymaps/toshi0383/rules.mk index 7860cbd019..9fef6963a1 100644 --- a/keyboards/zinc/keymaps/toshi0383/rules.mk +++ b/keyboards/zinc/keymaps/toshi0383/rules.mk @@ -15,6 +15,7 @@ UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. SWAP_HANDS_ENABLE = no # Enable one-hand typing +LTO_ENABLE = no # if firmware size over limit, try this option define ZINC_CUSTOMISE_MSG $(info Zinc customize) @@ -36,7 +37,6 @@ RGB_MATRIX = no # RGB LED Matrix RGB_MATRIX_SPLIT_RIGHT = no # RGB Matrix for RIGHT Hand LED_ANIMATIONS = yes # LED animations IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone) -Link_Time_Optimization = no # if firmware size over limit, try this option #### LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE. #### Do not enable these with audio at the same time. @@ -122,10 +122,6 @@ ifeq ($(strip $(RGB_MATRIX_SPLIT_RIGHT)), yes) OPT_DEFS += -DRGB_MATRIX_SPLIT_RIGHT endif -ifeq ($(strip $(Link_Time_Optimization)),yes) - EXTRAFLAGS += -flto -DUSE_Link_Time_Optimization -endif - # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend From 2742d0c4c119c35980997ee43d9ce0fc412ec250 Mon Sep 17 00:00:00 2001 From: peepeetee <43021794+peepeetee@users.noreply.github.com> Date: Tue, 28 Sep 2021 13:00:47 +0800 Subject: [PATCH 139/595] [Keyboard] Add BM80 Keyboard (#12948) * Initial compatibility with bm80 * move files to kprepublic directory, see #12159 * fix pin assignment * Revert "fix pin assignment" This reverts commit 5a53a74953a23bb5064c11d5d9e6daf007a54872. * add testing setup (peepeetee keymap, will use for personal purposes later), fix LED assignment, add indicator LED, LED location, count, and flags are broken * fixed flags( not sure, please check) * fixed number of LEDs * add comment about f11 * remove comment about f11, change capslock flag to be 1 rather than 1+8 as there is a standalone indicator LED * readme.md * add via keymap * add info.json with help from noroadsleft's converter * add suspended state implementation, I don't think it's working * update to my testing setup * restore erroneously included bm68rgb config * Update keyboards/kprepublic/bm80/config.h Co-authored-by: Drashna Jaelre * add reset instructions * change reset instruction grammar * remove not working sleep function, add comment for RGB flags * add LED mapping comments * change readme grammar * replace rgb light paremeters with rgb matrix paremeters, enable framebuffer effects * re-enable peepeetee/config.h, updating my disabled effect list * updating my disabled effect list * update LED struct documentation * update readme with RGB matrix effect information * Update keyboards/kprepublic/bm80/rules.mk Co-authored-by: Drashna Jaelre * move files back to keyboard from keyboard/kprepublic, see 85b33d6 and qmk#12159 * Apply suggestions from code review Co-authored-by: ridingqwerty * cleanup peepeetee keymap * update peepeetee keymap; rebase on current master * moved to /kprepublic, see #12159 * Apply suggestions from code review Co-authored-by: Drashna Jaelre * Apply suggestions from code review Co-authored-by: Ryan Co-authored-by: Drashna Jaelre Co-authored-by: ridingqwerty Co-authored-by: Ryan --- keyboards/kprepublic/bm80/bm80.c | 142 ++++++++++++++++++ keyboards/kprepublic/bm80/bm80.h | 43 ++++++ keyboards/kprepublic/bm80/config.h | 99 ++++++++++++ keyboards/kprepublic/bm80/info.json | 98 ++++++++++++ .../kprepublic/bm80/keymaps/default/keymap.c | 51 +++++++ .../kprepublic/bm80/keymaps/default/readme.md | 1 + .../bm80/keymaps/peepeetee/config.h | 97 ++++++++++++ .../bm80/keymaps/peepeetee/keymap.c | 51 +++++++ .../kprepublic/bm80/keymaps/via/keymap.c | 57 +++++++ .../kprepublic/bm80/keymaps/via/readme.md | 1 + .../kprepublic/bm80/keymaps/via/rules.mk | 1 + keyboards/kprepublic/bm80/readme.md | 30 ++++ keyboards/kprepublic/bm80/rules.mk | 26 ++++ 13 files changed, 697 insertions(+) create mode 100644 keyboards/kprepublic/bm80/bm80.c create mode 100644 keyboards/kprepublic/bm80/bm80.h create mode 100644 keyboards/kprepublic/bm80/config.h create mode 100644 keyboards/kprepublic/bm80/info.json create mode 100644 keyboards/kprepublic/bm80/keymaps/default/keymap.c create mode 100644 keyboards/kprepublic/bm80/keymaps/default/readme.md create mode 100644 keyboards/kprepublic/bm80/keymaps/peepeetee/config.h create mode 100644 keyboards/kprepublic/bm80/keymaps/peepeetee/keymap.c create mode 100644 keyboards/kprepublic/bm80/keymaps/via/keymap.c create mode 100644 keyboards/kprepublic/bm80/keymaps/via/readme.md create mode 100644 keyboards/kprepublic/bm80/keymaps/via/rules.mk create mode 100644 keyboards/kprepublic/bm80/readme.md create mode 100644 keyboards/kprepublic/bm80/rules.mk diff --git a/keyboards/kprepublic/bm80/bm80.c b/keyboards/kprepublic/bm80/bm80.c new file mode 100644 index 0000000000..8a0d26e87d --- /dev/null +++ b/keyboards/kprepublic/bm80/bm80.c @@ -0,0 +1,142 @@ +/* Copyright 2021 peepeetee + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "bm80.h" + +#ifdef RGB_MATRIX_ENABLE +led_config_t g_led_config = { { + // Key Matrix to LED Index + { 0, NO_LED, 1, 2, 3, 4, NO_LED, 5, 6, 7, 8, 9, 10, 12, 13, 14, 15 }, + { 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32 }, + { 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49 }, + { 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 11, 62, NO_LED, NO_LED, NO_LED }, + /* ^ this one is f11*/ + { 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, NO_LED, 74, NO_LED, NO_LED, 75, NO_LED }, + { 76, 77, 78, NO_LED, NO_LED, 79, NO_LED, NO_LED, NO_LED, 80, 81, 82, 83, 84, NO_LED, 85, 86 } + +// K0_0, K0_2, K0_3, K0_4, K0_5, K0_7, K0_8, K0_9, K0_A, K0_B, K0_C, K3_C, K0_D, K0_E, K0_F, K0_10, +// K1_0, K1_1, K1_2, K1_3, K1_4, K1_5, K1_6, K1_7, K1_8, K1_9, K1_A, K1_B, K1_C, K1_D, K1_E, K1_F, K1_10, +// K2_0, K2_1, K2_2, K2_3, K2_4, K2_5, K2_6, K2_7, K2_8, K2_9, K2_A, K2_B, K2_C, K2_D, K2_E, K2_F, K2_10, +// K3_0, K3_1, K3_2, K3_3, K3_4, K3_5, K3_6, K3_7, K3_8, K3_9, K3_A, K3_B, K3_D, +// K4_0, K4_1, K4_2, K4_3, K4_4, K4_5, K4_6, K4_7, K4_8, K4_9, K4_A, K4_C, K4_F, +// K5_0, K5_1, K5_2, K5_5, K5_9, K5_A, K5_B, K5_C, K5_D, K5_F, K5_10 + + +// K0_0, KC_NO, K0_2, K0_3, K0_4, K0_5, KC_NO, K0_7, K0_8, K0_9, K0_A, K0_B, K0_C, K0_D, K0_E, K0_F, K0_10 +// K1_0, K1_1, K1_2, K1_3, K1_4, K1_5, K1_6, K1_7, K1_8, K1_9, K1_A, K1_B, K1_C, K1_D, K1_E, K1_F, K1_10 +// K2_0, K2_1, K2_2, K2_3, K2_4, K2_5, K2_6, K2_7, K2_8, K2_9, K2_A, K2_B, K2_C, K2_D, K2_E, K2_F, K2_10 +// K3_0, K3_1, K3_2, K3_3, K3_4, K3_5, K3_6, K3_7, K3_8, K3_9, K3_A, K3_B, K3_C, K3_D, KC_NO, KC_NO, KC_NO +// K4_0, K4_1, K4_2, K4_3, K4_4, K4_5, K4_6, K4_7, K4_8, K4_9, K4_A, KC_NO, K4_C, KC_NO, KC_NO, K4_F, KC_NO +// K5_0, K5_1, K5_2, KC_NO, KC_NO, K5_5, KC_NO, KC_NO, KC_NO, K5_9, K5_A, K5_B, K5_C, K5_D, KC_NO, K5_F, K5_10 + + /* + * ┌───┐   ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┐ + * │ 0 │   │ 1 │ 2 │ 3 │ 4 │ │ 5 │ 6 │ 7 │ 8 │ │ 9 │ 10│ 11│ 12│ │ 13│ 14│ 15│ + * └───┘   └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┘ + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ ┌───┬───┬───┐ + * │ 16│ 17│ 18│ 19│ 20│ 21│ 22│ 23│ 24│ 25│ 26│ 27│ 28│  29 │ │ 30│ 31│ 32│ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ ├───┼───┼───┤ + * │  33 │ 34│ 35│ 36│ 37│ 38│ 39│ 40│ 41│ 42│ 43│ 44│ 45│  46 │ │ 47│ 48│ 49│ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ └───┴───┴───┘ + * │ 50  │ 51│ 52│ 53│ 54│ 55│ 56│ 57│ 58│ 59│ 60│ 61│   62  │ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────────┤     ┌───┐ + * │ 63   │ 64│ 65│ 66│ 67│ 68│ 69│ 70│ 71│ 72│ 73│    74  │     │ 75│ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤ ┌───┼───┼───┐ + * │ 76 │ 77 │ 78 │           79           │ 80 │ 81 │ 82 │ 83 │ │ 84│ 85│ 86│ + * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ └───┴───┴───┘ + */ + +}, { + // LED Index to Physical Position + { 7, 5 }, { 31, 5 }, { 43, 5 }, { 55, 5 }, { 67, 5 }, { 85, 5 }, { 97, 5 }, { 109, 5 }, { 121, 5 }, { 139, 5 }, { 151, 5 }, { 163, 5 }, { 175, 5 }, { 193, 5 }, { 205, 5 }, { 217, 5 }, + /* + * ┌───┐   ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┐ + * │ 0 │   │ 1 │ 2 │ 3 │ 4 │ │ 5 │ 6 │ 7 │ 8 │ │ 9 │ 10│ 11│ 12│ │ 13│ 14│ 15│ + * └───┘   └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┘ + */ + { 7, 20 }, { 19, 20 }, { 31, 20 }, { 43, 20 }, { 55, 20 }, { 67, 20 }, { 79, 20 }, { 91, 20 }, { 103, 20 }, { 115, 20 }, { 127, 20 }, { 139, 20 }, { 151, 20 }, { 169, 20 }, { 193, 20 }, { 205, 20 }, { 217, 20 }, + /* + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ ┌───┬───┬───┐ + * │ 16│ 17│ 18│ 19│ 20│ 21│ 22│ 23│ 24│ 25│ 26│ 27│ 28│  29 │ │ 30│ 31│ 32│ + * └───┴───┴───┴───┴───┴───┴───┴───┴───┴───┴───┴───┴───┴───────┘ └───┴───┴───┘ + */ + { 10, 30 }, { 25, 30 }, { 37, 30 }, { 49, 30 }, { 61, 30 }, { 73, 30 }, { 85, 30 }, { 97, 30 }, { 109, 30 }, { 121, 30 }, { 133, 30 }, { 145, 30 }, { 157, 30 }, { 172, 30 }, { 193, 30 }, { 205, 30 }, { 217, 30 }, + /* + * ┌─────┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬─────┐ ┌───┬───┬───┐ + * │  33 │ 34│ 35│ 36│ 37│ 38│ 39│ 40│ 41│ 42│ 43│ 44│ 45│  46 │ │ 47│ 48│ 49│ + * └─────┴───┴───┴───┴───┴───┴───┴───┴───┴───┴───┴───┴───┴─────┘ └───┴───┴───┘ + */ + { 11, 39 }, { 28, 39 }, { 40, 39 }, { 52, 39 }, { 64, 39 }, { 76, 39 }, { 88, 39 }, { 100, 39 }, { 112, 39 }, { 124, 39 }, { 136, 39 }, { 148, 39 }, { 168, 39 }, + /* + * ┌──────┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬────────┐ + * │ 50  │ 51│ 52│ 53│ 54│ 55│ 56│ 57│ 58│ 59│ 60│ 61│   62  │ + * └──────┴───┴───┴───┴───┴───┴───┴───┴───┴───┴───┴───┴────────┘ + */ + { 14, 49 }, { 34, 49 }, { 46, 49 }, { 58, 49 }, { 70, 49 }, { 82, 49 }, { 94, 49 }, { 106, 49 }, { 118, 49 }, { 130, 49 }, { 142, 49 }, { 165, 49 }, { 205, 49 }, + /* + * ┌────────┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬──────────┐     ┌───┐ + * │ 63   │ 64│ 65│ 66│ 67│ 68│ 69│ 70│ 71│ 72│ 73│    74  │     │ 75│ + * └────────┴───┴───┴───┴───┴───┴───┴───┴───┴───┴───┴──────────┘  └───┘ + */ + { 8, 59 }, { 23, 59 }, { 38, 59 }, { 83, 59 }, { 129, 59 }, { 144, 59 }, { 159, 59 }, { 174, 59 }, { 193, 59 }, { 205, 59 }, { 217, 59 } + /* + * ┌────┬────┬────┬────────────────────────┬────┬────┬────┬────┐ ┌───┬───┬───┐ + * │ 76 │ 77 │ 78 │           79           │ 80 │ 81 │ 82 │ 83 │ │ 84│ 85│ 86│ + * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ └───┴───┴───┘ + */ +}, { + // LED Index to Flag + 1, 4, 4, 4, 4, 1, 1, 1, 1, 4, 4, 4, 4, 1, 9/*scroll lock*/, 1, + /* + * ┌───┐   ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┐ + * │ 0 │   │ 1 │ 2 │ 3 │ 4 │ │ 5 │ 6 │ 7 │ 8 │ │ 9 │ 10│ 11│ 12│ │ 13│ 14│ 15│ + * └───┘   └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┘ + */ + 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 1, 1, + /* + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ ┌───┬───┬───┐ + * │ 16│ 17│ 18│ 19│ 20│ 21│ 22│ 23│ 24│ 25│ 26│ 27│ 28│  29 │ │ 30│ 31│ 32│ + * └───┴───┴───┴───┴───┴───┴───┴───┴───┴───┴───┴───┴───┴───────┘ └───┴───┴───┘ + */ + 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 1, + /* + * ┌─────┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬─────┐ ┌───┬───┬───┐ + * │  33 │ 34│ 35│ 36│ 37│ 38│ 39│ 40│ 41│ 42│ 43│ 44│ 45│  46 │ │ 47│ 48│ 49│ + * └─────┴───┴───┴───┴───┴───┴───┴───┴───┴───┴───┴───┴───┴─────┘ └───┴───┴───┘ + */ + 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, + //caps lock is 1 instead of 1+8, this board has a dedicated led + /* + * ┌──────┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬────────┐ + * │ 50  │ 51│ 52│ 53│ 54│ 55│ 56│ 57│ 58│ 59│ 60│ 61│   62  │ + * └──────┴───┴───┴───┴───┴───┴───┴───┴───┴───┴───┴───┴────────┘ + */ + 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, + /* + * ┌────────┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬──────────┐     ┌───┐ + * │ 63   │ 64│ 65│ 66│ 67│ 68│ 69│ 70│ 71│ 72│ 73│    74  │     │ 75│ + * └────────┴───┴───┴───┴───┴───┴───┴───┴───┴───┴───┴──────────┘  └───┘ + */ + 1, 1, 1, 4, 1, 1, 1, 1, 1, 1, 1 + /* + * ┌────┬────┬────┬────────────────────────┬────┬────┬────┬────┐ ┌───┬───┬───┐ + * │ 76 │ 77 │ 78 │           79           │ 80 │ 81 │ 82 │ 83 │ │ 84│ 85│ 86│ + * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ └───┴───┴───┘ + */ +} }; + + +#endif diff --git a/keyboards/kprepublic/bm80/bm80.h b/keyboards/kprepublic/bm80/bm80.h new file mode 100644 index 0000000000..450befe882 --- /dev/null +++ b/keyboards/kprepublic/bm80/bm80.h @@ -0,0 +1,43 @@ +/* Copyright 2021 peepeetee + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT_tkl_ansi( \ + K0_0, K0_2, K0_3, K0_4, K0_5, K0_7, K0_8, K0_9, K0_A, K0_B, K0_C, K3_C, K0_D, K0_E, K0_F, K0_10, \ + K1_0, K1_1, K1_2, K1_3, K1_4, K1_5, K1_6, K1_7, K1_8, K1_9, K1_A, K1_B, K1_C, K1_D, K1_E, K1_F, K1_10, \ + K2_0, K2_1, K2_2, K2_3, K2_4, K2_5, K2_6, K2_7, K2_8, K2_9, K2_A, K2_B, K2_C, K2_D, K2_E, K2_F, K2_10, \ + K3_0, K3_1, K3_2, K3_3, K3_4, K3_5, K3_6, K3_7, K3_8, K3_9, K3_A, K3_B, K3_D, \ + K4_0, K4_1, K4_2, K4_3, K4_4, K4_5, K4_6, K4_7, K4_8, K4_9, K4_A, K4_C, K4_F, \ + K5_0, K5_1, K5_2, K5_5, K5_9, K5_A, K5_B, K5_C, K5_D, K5_F, K5_10 \ +) { \ + { K0_0, KC_NO, K0_2, K0_3, K0_4, K0_5, KC_NO, K0_7, K0_8, K0_9, K0_A, K0_B, K0_C, K0_D, K0_E, K0_F, K0_10 }, \ + { K1_0, K1_1, K1_2, K1_3, K1_4, K1_5, K1_6, K1_7, K1_8, K1_9, K1_A, K1_B, K1_C, K1_D, K1_E, K1_F, K1_10 }, \ + { K2_0, K2_1, K2_2, K2_3, K2_4, K2_5, K2_6, K2_7, K2_8, K2_9, K2_A, K2_B, K2_C, K2_D, K2_E, K2_F, K2_10 }, \ + { K3_0, K3_1, K3_2, K3_3, K3_4, K3_5, K3_6, K3_7, K3_8, K3_9, K3_A, K3_B, K3_C, K3_D, KC_NO, KC_NO, KC_NO }, \ + { K4_0, K4_1, K4_2, K4_3, K4_4, K4_5, K4_6, K4_7, K4_8, K4_9, K4_A, KC_NO, K4_C, KC_NO, KC_NO, K4_F, KC_NO }, \ + { K5_0, K5_1, K5_2, KC_NO, KC_NO, K5_5, KC_NO, KC_NO, KC_NO, K5_9, K5_A, K5_B, K5_C, K5_D, KC_NO, K5_F, K5_10 } \ +} diff --git a/keyboards/kprepublic/bm80/config.h b/keyboards/kprepublic/bm80/config.h new file mode 100644 index 0000000000..584fdec989 --- /dev/null +++ b/keyboards/kprepublic/bm80/config.h @@ -0,0 +1,99 @@ +/* +Copyright 2021 peepeetee + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4B50 //KP +#define PRODUCT_ID 0xEF83 +#define DEVICE_VER 0x0001 +#define MANUFACTURER KPRepublic +#define PRODUCT BM80HSRGB + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 17 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { B3, B2, B1, B0, C6, C7 } +#define MATRIX_COL_PINS { F0, F1, F4, D7, D6, D4, D5, D3, D2, F5, F6, F7, D1, D0, B4, B5, B6 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + + + + +#define LED_CAPS_LOCK_PIN E6 +#define LED_PIN_ON_STATE 0 + + +#define RGB_DI_PIN E2 +// The number of LEDs connected +#define DRIVER_LED_TOTAL 87 + +#ifdef RGB_DI_PIN +#define RGBLED_NUM 87 +#define RGB_MATRIX_KEYPRESSES // reacts to keypresses +//#define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses) +#define RGB_MATRIX_FRAMEBUFFER_EFFECTS +#define RGB_DISABLE_TIMEOUT 0 // number of milliseconds to wait until rgb automatically turns off +//#define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness) +#define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) +// #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 +#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT // Sets the default mode, if none has been set +#define RGB_MATRIX_STARTUP_HUE 0 // Sets the default hue value, if none has been set +#define RGB_MATRIX_STARTUP_SAT 255 // Sets the default saturation value, if none has been set +#define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS // Sets the default brightness value, if none has been set +#define RGB_MATRIX_STARTUP_SPD 127 // Sets the default animation speed, if none has been set +// #define RGB_MATRIX_DISABLE_KEYCODES // disables control of rgb matrix by keycodes (must use code functions to control the feature) + + + +// # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended +// does not work for some reason, might revisit + + + +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION diff --git a/keyboards/kprepublic/bm80/info.json b/keyboards/kprepublic/bm80/info.json new file mode 100644 index 0000000000..8c7a0056b3 --- /dev/null +++ b/keyboards/kprepublic/bm80/info.json @@ -0,0 +1,98 @@ +{ + "keyboard_name": "bm80", + "url": "", + "maintainer": "peepeetee", + "layouts": { + "LAYOUT_tkl_ansi": { + "layout": [ + {"label":"K0_0 (B3,F0)", "x":0, "y":0}, + {"label":"K0_2 (B3,F4)", "x":2, "y":0}, + {"label":"K0_3 (B3,D7)", "x":3, "y":0}, + {"label":"K0_4 (B3,D6)", "x":4, "y":0}, + {"label":"K0_5 (B3,D4)", "x":5, "y":0}, + {"label":"K0_7 (B3,D3)", "x":6.5, "y":0}, + {"label":"K0_8 (B3,D2)", "x":7.5, "y":0}, + {"label":"K0_9 (B3,F5)", "x":8.5, "y":0}, + {"label":"K0_A (B3,F6)", "x":9.5, "y":0}, + {"label":"K0_B (B3,F7)", "x":11, "y":0}, + {"label":"K0_C (B3,D1)", "x":12, "y":0}, + {"label":"K3_C (B0,D1)", "x":13, "y":0}, + {"label":"K0_D (B3,D0)", "x":14, "y":0}, + {"label":"K0_E (B3,B4)", "x":15.25, "y":0}, + {"label":"K0_F (B3,B5)", "x":16.25, "y":0}, + {"label":"K0_10 (B3,B6)", "x":17.25, "y":0}, + {"label":"K1_0 (B2,F0)", "x":0, "y":1.5}, + {"label":"K1_1 (B2,F1)", "x":1, "y":1.5}, + {"label":"K1_2 (B2,F4)", "x":2, "y":1.5}, + {"label":"K1_3 (B2,D7)", "x":3, "y":1.5}, + {"label":"K1_4 (B2,D6)", "x":4, "y":1.5}, + {"label":"K1_5 (B2,D4)", "x":5, "y":1.5}, + {"label":"K1_6 (B2,D5)", "x":6, "y":1.5}, + {"label":"K1_7 (B2,D3)", "x":7, "y":1.5}, + {"label":"K1_8 (B2,D2)", "x":8, "y":1.5}, + {"label":"K1_9 (B2,F5)", "x":9, "y":1.5}, + {"label":"K1_A (B2,F6)", "x":10, "y":1.5}, + {"label":"K1_B (B2,F7)", "x":11, "y":1.5}, + {"label":"K1_C (B2,D1)", "x":12, "y":1.5}, + {"label":"K1_D (B2,D0)", "x":13, "y":1.5, "w":2}, + {"label":"K1_E (B2,B4)", "x":15.25, "y":1.5}, + {"label":"K1_F (B2,B5)", "x":16.25, "y":1.5}, + {"label":"K1_10 (B2,B6)", "x":17.25, "y":1.5}, + {"label":"K2_0 (B1,F0)", "x":0, "y":2.5, "w":1.5}, + {"label":"K2_1 (B1,F1)", "x":1.5, "y":2.5}, + {"label":"K2_2 (B1,F4)", "x":2.5, "y":2.5}, + {"label":"K2_3 (B1,D7)", "x":3.5, "y":2.5}, + {"label":"K2_4 (B1,D6)", "x":4.5, "y":2.5}, + {"label":"K2_5 (B1,D4)", "x":5.5, "y":2.5}, + {"label":"K2_6 (B1,D5)", "x":6.5, "y":2.5}, + {"label":"K2_7 (B1,D3)", "x":7.5, "y":2.5}, + {"label":"K2_8 (B1,D2)", "x":8.5, "y":2.5}, + {"label":"K2_9 (B1,F5)", "x":9.5, "y":2.5}, + {"label":"K2_A (B1,F6)", "x":10.5, "y":2.5}, + {"label":"K2_B (B1,F7)", "x":11.5, "y":2.5}, + {"label":"K2_C (B1,D1)", "x":12.5, "y":2.5}, + {"label":"K2_D (B1,D0)", "x":13.5, "y":2.5, "w":1.5}, + {"label":"K2_E (B1,B4)", "x":15.25, "y":2.5}, + {"label":"K2_F (B1,B5)", "x":16.25, "y":2.5}, + {"label":"K2_10 (B1,B6)", "x":17.25, "y":2.5}, + {"label":"K3_0 (B0,F0)", "x":0, "y":3.5, "w":1.75}, + {"label":"K3_1 (B0,F1)", "x":1.75, "y":3.5}, + {"label":"K3_2 (B0,F4)", "x":2.75, "y":3.5}, + {"label":"K3_3 (B0,D7)", "x":3.75, "y":3.5}, + {"label":"K3_4 (B0,D6)", "x":4.75, "y":3.5}, + {"label":"K3_5 (B0,D4)", "x":5.75, "y":3.5}, + {"label":"K3_6 (B0,D5)", "x":6.75, "y":3.5}, + {"label":"K3_7 (B0,D3)", "x":7.75, "y":3.5}, + {"label":"K3_8 (B0,D2)", "x":8.75, "y":3.5}, + {"label":"K3_9 (B0,F5)", "x":9.75, "y":3.5}, + {"label":"K3_A (B0,F6)", "x":10.75, "y":3.5}, + {"label":"K3_B (B0,F7)", "x":11.75, "y":3.5}, + {"label":"K3_D (B0,D0)", "x":12.75, "y":3.5, "w":2.25}, + {"label":"K4_0 (C6,F0)", "x":0, "y":4.5, "w":2.25}, + {"label":"K4_1 (C6,F1)", "x":2.25, "y":4.5}, + {"label":"K4_2 (C6,F4)", "x":3.25, "y":4.5}, + {"label":"K4_3 (C6,D7)", "x":4.25, "y":4.5}, + {"label":"K4_4 (C6,D6)", "x":5.25, "y":4.5}, + {"label":"K4_5 (C6,D4)", "x":6.25, "y":4.5}, + {"label":"K4_6 (C6,D5)", "x":7.25, "y":4.5}, + {"label":"K4_7 (C6,D3)", "x":8.25, "y":4.5}, + {"label":"K4_8 (C6,D2)", "x":9.25, "y":4.5}, + {"label":"K4_9 (C6,F5)", "x":10.25, "y":4.5}, + {"label":"K4_A (C6,F6)", "x":11.25, "y":4.5}, + {"label":"K4_C (C6,D1)", "x":12.25, "y":4.5, "w":2.75}, + {"label":"K4_F (C6,B5)", "x":16.25, "y":4.5}, + {"label":"K5_0 (C7,F0)", "x":0, "y":5.5, "w":1.25}, + {"label":"K5_1 (C7,F1)", "x":1.25, "y":5.5, "w":1.25}, + {"label":"K5_2 (C7,F4)", "x":2.5, "y":5.5, "w":1.25}, + {"label":"K5_5 (C7,D4)", "x":3.75, "y":5.5, "w":6.25}, + {"label":"K5_9 (C7,F5)", "x":10, "y":5.5, "w":1.25}, + {"label":"K5_A (C7,F6)", "x":11.25, "y":5.5, "w":1.25}, + {"label":"K5_B (C7,F7)", "x":12.5, "y":5.5, "w":1.25}, + {"label":"K5_C (C7,D1)", "x":13.75, "y":5.5, "w":1.25}, + {"label":"K5_D (C7,D0)", "x":15.25, "y":5.5}, + {"label":"K5_F (C7,B5)", "x":16.25, "y":5.5}, + {"label":"K5_10 (C7,B6)", "x":17.25, "y":5.5} + ] + } + } +} \ No newline at end of file diff --git a/keyboards/kprepublic/bm80/keymaps/default/keymap.c b/keyboards/kprepublic/bm80/keymaps/default/keymap.c new file mode 100644 index 0000000000..d86c6f9ec8 --- /dev/null +++ b/keyboards/kprepublic/bm80/keymaps/default/keymap.c @@ -0,0 +1,51 @@ +/* Copyright 2021 peepeetee + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_tkl_ansi( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT_tkl_ansi( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, RESET, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) + +/* + [X] = LAYOUT_tkl_ansi( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +*/ + + +}; + diff --git a/keyboards/kprepublic/bm80/keymaps/default/readme.md b/keyboards/kprepublic/bm80/keymaps/default/readme.md new file mode 100644 index 0000000000..8ad360ebda --- /dev/null +++ b/keyboards/kprepublic/bm80/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for bm80 diff --git a/keyboards/kprepublic/bm80/keymaps/peepeetee/config.h b/keyboards/kprepublic/bm80/keymaps/peepeetee/config.h new file mode 100644 index 0000000000..b322afae9b --- /dev/null +++ b/keyboards/kprepublic/bm80/keymaps/peepeetee/config.h @@ -0,0 +1,97 @@ +/* Copyright 2021 peepeetee + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + + + +// #define IS_COMMAND() (get_mods() == MOD_MASK_SHIFT) // Key combination that allows the use of magic commands (useful for debugging) + +// #define TERMINAL_HELP + +#define FORCE_NKRO // NKRO by default requires to be turned on, this forces it on during keyboard startup regardless of EEPROM setting. NKRO can still be turned off but will be turned on again if the keyboard reboots. +// #define QMK_KEYS_PER_SCAN 4 // Allows sending more than one key per scan. By default, only one key event gets sent via process_record() per scan. This has little impact on most typing, but if you're doing a lot of chords, or your scan rate is slow to begin with, you can have some delay in processing key events. Each press and release is a separate event. For a keyboard with 1ms or so scan times, even a very fast typist isn't going to produce the 500 keystrokes a second needed to actually get more than a few ms of delay from this. But if you're doing chording on something with 3-4ms scan times? You probably want this. +// #define STRICT_LAYER_RELEASE // Force a key release to be evaluated using the current layer stack instead of remembering which layer it came from (used for advanced cases) +// #define TAPPING_TERM 200 // How long before a tap becomes a hold, if set above 500, a key tapped during the tapping term will turn it into a hold too +// #define TAPPING_TERM_PER_KEY // Enables handling for per key TAPPING_TERM settings +// #define RETRO_TAPPING // Tap anyway, even after TAPPING_TERM, if there was no other key interruption between press and release +// #define TAPPING_TOGGLE 2 // How many taps before triggering the toggle +// #define PERMISSIVE_HOLD // Makes tap and hold keys trigger the hold if another key is pressed before releasing, even if it hasn't hit the TAPPING_TERM. See Permissive Hold for details +// #define IGNORE_MOD_TAP_INTERRUPT // Makes it possible to do rolling combos (zx) with keys that convert to other keys on hold, by enforcing the TAPPING_TERM for both keys. See Mod tap interrupt for details +// #define TAPPING_FORCE_HOLD // Makes it possible to use a dual role key as modifier shortly after having been tapped. See Hold after tap. Breaks any Tap Toggle functionality (TT or the One Shot Tap Toggle) +// #define LEADER_TIMEOUT 300 // How long before the leader key times out. If you're having issues finishing the sequence before it times out, you may need to increase the timeout setting. Or you may want to enable the LEADER_PER_KEY_TIMING option, which resets the timeout after each key is tapped. +// #define LEADER_PER_KEY_TIMING // Sets the timer for leader key chords to run on each key press rather than overall +// #define LEADER_KEY_STRICT_KEY_PROCESSING // Disables keycode filtering for Mod-Tap and Layer-Tap keycodes. Eg, if you enable this, you would need to specify MT(MOD_CTL, KC_A) if you want to use KC_A. +// #define ONESHOT_TIMEOUT 300 // How long before oneshot times out +// #define ONESHOT_TAP_TOGGLE 2 // How many taps before oneshot toggle is triggered +// #define COMBO_COUNT 2 // Set this to the number of combos that you're using in the Combo feature. +// #define COMBO_TERM 200 // How long for the Combo keys to be detected. Defaults to TAPPING_TERM if not defined. +// #define TAP_CODE_DELAY 100 // Sets the delay between register_code and unregister_code, if you're having issues with it registering properly (common on VUSB boards). The value is in milliseconds. +// #define TAP_HOLD_CAPS_DELAY 80 // Sets the delay for Tap Hold keys (LT, MT) when using KC_CAPSLOCK keycode, as this has some special handling on MacOS. The value is in milliseconds, and defaults to 80 ms if not defined. For macOS, you may want to set this to 200 or higher. + +// #define RGB_MATRIX_FRAMEBUFFER_EFFECTS +// #define RGB_MATRIX_KEYPRESSES // reacts to keypresses +// #define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses) +// #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_ALPHAS_MODS // Sets the default mode, if none has been set +// #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects +// #define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended +// #define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness) +// #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) + + +// This list in in the correct mode order. Next mode is the following line, previous mode is previous line. Loops around. +// #define DISABLE_RGB_MATRIX_SOLID_COLOR // Static single hue, no speed support +// #define DISABLE_RGB_MATRIX_ALPHAS_MODS // Static dual hue, speed is hue for secondary hue +#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN // Static gradient top to bottom, speed controls how much gradient changes +#define DISABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT // Static gradient top to bottom, speed controls how much gradient changes +#define DISABLE_RGB_MATRIX_BREATHING // Single hue brightness cycling animation +#define DISABLE_RGB_MATRIX_BAND_SAT // Single hue band fading saturation scrolling left to right +#define DISABLE_RGB_MATRIX_BAND_VAL // Single hue band fading brightness scrolling left to right +#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT // Single hue 3 blade spinning pinwheel fades saturation +#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL // Single hue 3 blade spinning pinwheel fades brightness +#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT // Single hue spinning spiral fades saturation +#define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL // Single hue spinning spiral fades brightness +#define DISABLE_RGB_MATRIX_CYCLE_ALL // Full keyboard solid hue cycling through full gradient +//#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT // Full gradient scrolling left to right +#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN // Full gradient scrolling top to bottom +#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON // Full gradent Chevron shapped scrolling left to right +#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN // Full gradient scrolling out to in +#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL // Full dual gradients scrolling out to in +#define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL // Full gradient spinning pinwheel around center of keyboard +#define DISABLE_RGB_MATRIX_CYCLE_SPIRAL // Full gradient spinning spiral around center of keyboard +#define DISABLE_RGB_MATRIX_DUAL_BEACON // Full gradient spinning around center of keyboard +#define DISABLE_RGB_MATRIX_RAINBOW_BEACON // Full tighter gradient spinning around center of keyboard +#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS // Full dual gradients spinning two halfs of keyboard +#define DISABLE_RGB_MATRIX_RAINDROPS // Randomly changes a single key's hue +#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS // Randomly changes a single key's hue and saturation +#define DISABLE_RGB_MATRIX_HUE_BREATHING // Hue shifts up a slight ammount at the same time, then shifts back +#define DISABLE_RGB_MATRIX_HUE_PENDULUM // Hue shifts up a slight ammount in a wave to the right, then back to the left +#define DISABLE_RGB_MATRIX_HUE_WAVE // Hue shifts up a slight ammount and then back down in a wave to the right +// =================================================== Requires RGB_MATRIX_FRAMEBUFFER_EFFECTS ============================================================= +// #define DISABLE_RGB_MATRIX_TYPING_HEATMAP // How hot is your WPM! +#define DISABLE_RGB_MATRIX_DIGITAL_RAIN // That famous computer simulation +// =================================================== RGB_MATRIX_KEYPRESSES OR RGB_MATRIX_KEYRELEASES ===================================================== +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE // Pulses keys hit to hue & value then fades value out +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE // Static single hue, pulses keys hit to shifted hue then fades to current hue +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE // Hue & value pulse near a single key hit then fades value out +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE // Hue & value pulse near multiple key hits then fades value out +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS // Hue & value pulse the same column and row of a single key hit then fades value out +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS // Hue & value pulse the same column and row of multiple key hits then fades value out +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS // Hue & value pulse away on the same column and row of a single key hit then fades value out +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS // Hue & value pulse away on the same column and row of multiple key hits then fades value out +#define DISABLE_RGB_MATRIX_SPLASH // Full gradient & value pulse away from a single key hit then fades value out +//#define DISABLE_RGB_MATRIX_MULTISPLASH // Full gradient & value pulse away from multiple key hits then fades value out +#define DISABLE_RGB_MATRIX_SOLID_SPLASH // Hue & value pulse away from a single key hit then fades value out +#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH // Hue & value pulse away from multiple key hits then fades value out diff --git a/keyboards/kprepublic/bm80/keymaps/peepeetee/keymap.c b/keyboards/kprepublic/bm80/keymaps/peepeetee/keymap.c new file mode 100644 index 0000000000..d4a188089b --- /dev/null +++ b/keyboards/kprepublic/bm80/keymaps/peepeetee/keymap.c @@ -0,0 +1,51 @@ +/* Copyright 2021 peepeetee + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_tkl_ansi( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT_tkl_ansi( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + RGB_MOD, RGB_HUI, RGB_VAI, RGB_SAI, RGB_SPI, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + RGB_TOG, RGB_HUD, RGB_VAD, RGB_SAD, RGB_SPD, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, RESET, _______, _______, _______, _______, _______, _______, KC_AUDIO_VOL_UP, + _______, _______, _______, _______, _______, _______, _______, _______, KC_BRIGHTNESS_DOWN, KC_AUDIO_VOL_DOWN, KC_BRIGHTNESS_UP + ) + +/* + [X] = LAYOUT_tkl_ansi( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +*/ + + +}; + diff --git a/keyboards/kprepublic/bm80/keymaps/via/keymap.c b/keyboards/kprepublic/bm80/keymaps/via/keymap.c new file mode 100644 index 0000000000..53b2981c5e --- /dev/null +++ b/keyboards/kprepublic/bm80/keymaps/via/keymap.c @@ -0,0 +1,57 @@ +/* Copyright 2021 peepeetee + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_tkl_ansi( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT_tkl_ansi( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, RESET, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [2] = LAYOUT_tkl_ansi( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [3] = LAYOUT_tkl_ansi( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) + +}; + diff --git a/keyboards/kprepublic/bm80/keymaps/via/readme.md b/keyboards/kprepublic/bm80/keymaps/via/readme.md new file mode 100644 index 0000000000..9fb42c24d8 --- /dev/null +++ b/keyboards/kprepublic/bm80/keymaps/via/readme.md @@ -0,0 +1 @@ +# The default VIA keymap for bm80 diff --git a/keyboards/kprepublic/bm80/keymaps/via/rules.mk b/keyboards/kprepublic/bm80/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/kprepublic/bm80/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/kprepublic/bm80/readme.md b/keyboards/kprepublic/bm80/readme.md new file mode 100644 index 0000000000..a0d8e8cf9a --- /dev/null +++ b/keyboards/kprepublic/bm80/readme.md @@ -0,0 +1,30 @@ +# bm80 + +![bm80](https://i.imgur.com/AqjEjOi.jpeg) + +A tkl, hotswap, in switch RGB keyboard from KPRepublic. + +* Keyboard Maintainer: [peepeetee](https://github.com/peepeetee) +* Hardware Supported: BM80 +* Hardware Availability: [KP Republic](https://kprepublic.com/collections/new-arrival/products/bm80rgb-bm80-rgb-80-hot-swappable-custom-mechanical-keyboard-pcb-programmed-qmk-via-firmware-full-rgb-switch-underglow-type-c) + +Make example for this keyboard (after setting up your build environment): + + make kprepublic/bm80:default + +Flashing example for this keyboard: + + make kprepublic/bm80:default:flash + +To reset the board into bootloader mode, do one of the following: + +* Short the two-pad footprint between the "delete" key and the "end" key while the board is plugged in +* Press the switch labled RST on the back of the PCB, near the MCU, while the board is plugged in +* Hold the Esc key while connecting the USB cable (also erases persistent settings) + +All of the RGB matrix effects are enabled by default. To disable specific ones, see [this section](https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects) for more information. + + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + + diff --git a/keyboards/kprepublic/bm80/rules.mk b/keyboards/kprepublic/bm80/rules.mk new file mode 100644 index 0000000000..0db2759897 --- /dev/null +++ b/keyboards/kprepublic/bm80/rules.mk @@ -0,0 +1,26 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +RGB_MATRIX_ENABLE = yes +RGB_MATRIX_DRIVER = WS2812 +LTO_ENABLE = yes + +LAYOUTS = tkl_ansi From 574b3d8a5a6891fff6d8058abc5c091f65f8dec2 Mon Sep 17 00:00:00 2001 From: Sergi Meseguer Date: Tue, 28 Sep 2021 07:10:10 +0200 Subject: [PATCH 140/595] [Keyboard] z12 micropad by zigotica (#14583) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- keyboards/z12/config.h | 53 ++++++++++++++++++++++ keyboards/z12/info.json | 26 +++++++++++ keyboards/z12/keymaps/default/config.h | 26 +++++++++++ keyboards/z12/keymaps/default/keymap.c | 59 +++++++++++++++++++++++++ keyboards/z12/keymaps/default/readme.md | 3 ++ keyboards/z12/keymaps/default/rules.mk | 2 + keyboards/z12/readme.md | 3 ++ keyboards/z12/rules.mk | 24 ++++++++++ keyboards/z12/z12.c | 39 ++++++++++++++++ keyboards/z12/z12.h | 34 ++++++++++++++ 10 files changed, 269 insertions(+) create mode 100644 keyboards/z12/config.h create mode 100644 keyboards/z12/info.json create mode 100644 keyboards/z12/keymaps/default/config.h create mode 100644 keyboards/z12/keymaps/default/keymap.c create mode 100644 keyboards/z12/keymaps/default/readme.md create mode 100644 keyboards/z12/keymaps/default/rules.mk create mode 100644 keyboards/z12/readme.md create mode 100644 keyboards/z12/rules.mk create mode 100644 keyboards/z12/z12.c create mode 100644 keyboards/z12/z12.h diff --git a/keyboards/z12/config.h b/keyboards/z12/config.h new file mode 100644 index 0000000000..7f897b795d --- /dev/null +++ b/keyboards/z12/config.h @@ -0,0 +1,53 @@ +/* Copyright 2020 Sergi Meseguer + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x7A74 +#define PRODUCT_ID 0x0001 +#define DEVICE_VER 0x0001 +#define MANUFACTURER zigotica +#define PRODUCT z12 + +#define ENCODERS_PAD_A { B4, B2 } +#define ENCODERS_PAD_B { B5, B6 } +#define ENCODER_DIRECTION_FLIP + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 4 + +/*Keyboard Matrix Assignments */ + +#define DIRECT_PINS { \ + { NO_PIN, E6, C6, NO_PIN }, \ + { D2, D7, D4, D3 }, \ + { F7, B1, B3, NO_PIN }, \ + { F6, F5, F4, NO_PIN } \ +} + +#define UNUSED_PINS + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE diff --git a/keyboards/z12/info.json b/keyboards/z12/info.json new file mode 100644 index 0000000000..3ae8937571 --- /dev/null +++ b/keyboards/z12/info.json @@ -0,0 +1,26 @@ +{ + "keyboard_name": "z12", + "url": "https://github.com/zigotica/mechanical-keyboards/tree/main/z12", + "maintainer": "@zigotica", + "layouts": { + "LAYOUT": { + "layout": [ + {"x": 1, "y": 0}, + {"x": 2, "y": 0}, + + {"x": 0, "y": 0.5}, + {"x": 1, "y": 1}, + {"x": 2, "y": 1}, + {"x": 3, "y": 0.5}, + + {"x": 0.5, "y": 2}, + {"x": 1.5, "y": 2}, + {"x": 2.5, "y": 2}, + + {"x": 0.5, "y": 3}, + {"x": 1.5, "y": 3}, + {"x": 2.5, "y": 3}, + ] + } + } +} diff --git a/keyboards/z12/keymaps/default/config.h b/keyboards/z12/keymaps/default/config.h new file mode 100644 index 0000000000..1fcf924f35 --- /dev/null +++ b/keyboards/z12/keymaps/default/config.h @@ -0,0 +1,26 @@ +/* Copyright 2020 Sergi Meseguer + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#define OLED_DISPLAY_128X32 + +// EC11 encoders' resolution. +// Reduce the value to 2 if you feel missing values: +#define ENCODER_RESOLUTION 4 + +// Allows correct registered values by rotary encoder: +#define TAP_CODE_DELAY 10 diff --git a/keyboards/z12/keymaps/default/keymap.c b/keyboards/z12/keymaps/default/keymap.c new file mode 100644 index 0000000000..16a6c1f70e --- /dev/null +++ b/keyboards/z12/keymaps/default/keymap.c @@ -0,0 +1,59 @@ +/* Copyright 2020 Sergi Meseguer + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + +enum layers { + BASE = 0 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* + * Base Layer: BASE + * + * ,-----------------------. + * | | o | o | | + * |-------+---+---+-------| + * | o | o | o | o | + * |-------+-------+-------| + * | o | o | o | + * |-------+-------+-------| + * | o | o | o | + * |-------+-------+-------| + */ + [BASE] = LAYOUT( + KC_Q, KC_W, + KC_E, KC_R, KC_T, KC_Y, + KC_U, KC_I, KC_O, + KC_P, KC_K, KC_A + ), + +/* + * TEMPLATE + * + * ,-----------------------. + * | | o | o | | + * |-------+---+---+-------| + * | o | o | o | o | + * |-------+-------+-------| + * | o | o | o | + * |-------+-------+-------| + * | o | o | o | + * |-------+-------+-------| + */ + +}; + diff --git a/keyboards/z12/keymaps/default/readme.md b/keyboards/z12/keymaps/default/readme.md new file mode 100644 index 0000000000..5f30ab6a39 --- /dev/null +++ b/keyboards/z12/keymaps/default/readme.md @@ -0,0 +1,3 @@ +# Default z12 Layout + +This is the default layout that comes flashed on every z12. diff --git a/keyboards/z12/keymaps/default/rules.mk b/keyboards/z12/keymaps/default/rules.mk new file mode 100644 index 0000000000..b220469c6c --- /dev/null +++ b/keyboards/z12/keymaps/default/rules.mk @@ -0,0 +1,2 @@ +OLED_ENABLE = yes # Enables the use of OLED displays +MOUSEKEY_ENABLE = yes diff --git a/keyboards/z12/readme.md b/keyboards/z12/readme.md new file mode 100644 index 0000000000..17e4bfdb84 --- /dev/null +++ b/keyboards/z12/readme.md @@ -0,0 +1,3 @@ +# z12 + +Firmware for [z12 micropad](https://github.com/zigotica/mechanical-keyboards/tree/main/z12) designed by @zigotica diff --git a/keyboards/z12/rules.mk b/keyboards/z12/rules.mk new file mode 100644 index 0000000000..32cdab8e95 --- /dev/null +++ b/keyboards/z12/rules.mk @@ -0,0 +1,24 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = caterina + +# Build Options +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +ENCODER_ENABLE = yes # Enables the use of encoders +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +LTO_ENABLE = yes # Enables Link Time Optimization (LTO) which reduces the compiled size +OLED_ENABLE = yes # Enables the use of OLED displays +OLED_DRIVER = SSD1306 # Enables the use of OLED displays + diff --git a/keyboards/z12/z12.c b/keyboards/z12/z12.c new file mode 100644 index 0000000000..99fe62ab93 --- /dev/null +++ b/keyboards/z12/z12.c @@ -0,0 +1,39 @@ +/* Copyright 2020 Sergi Meseguer + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "z12.h" + +#ifdef ENCODER_ENABLE +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + if (index == 0) { // LEFT + // Scroll + if (clockwise) { + tap_code_delay(KC_PGDN, 10); + } else { + tap_code_delay(KC_PGUP, 10); + } + } else { // RIGHT + // Volume control. + if (clockwise) { + tap_code_delay(KC_VOLU, 10); + } else { + tap_code_delay(KC_VOLD, 10); + } + } + return false; +} +#endif diff --git a/keyboards/z12/z12.h b/keyboards/z12/z12.h new file mode 100644 index 0000000000..0ea6c303f7 --- /dev/null +++ b/keyboards/z12/z12.h @@ -0,0 +1,34 @@ +/* Copyright 2020 Sergi Meseguer + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "quantum.h" + +/* This a shortcut to help you visually see your layout */ + +#define ___ KC_NO + +#define LAYOUT( \ + BN4, BN2, \ + SW7, BN3, BN1, SW8, \ + SW4, SW5, SW6, \ + SW3, SW2, SW1 \ + ) \ + { \ + { ___, BN4, BN2, ___ }, \ + { SW7, BN3, BN1, SW8 }, \ + { SW4, SW5, SW6, ___ }, \ + { SW3, SW2, SW1, ___ }, \ + } From 02451fcc7507128ea7bded71962e19df2b2ecb02 Mon Sep 17 00:00:00 2001 From: Dasky <32983009+daskygit@users.noreply.github.com> Date: Tue, 28 Sep 2021 06:26:30 +0100 Subject: [PATCH 141/595] [Keyboard] Add dz60rgb_ansi v2_1 (#14614) Co-authored-by: Ryan --- keyboards/dztech/dz60rgb_ansi/readme.md | 4 +- keyboards/dztech/dz60rgb_ansi/v2_1/config.h | 77 +++++++++++++++++++++ keyboards/dztech/dz60rgb_ansi/v2_1/rules.mk | 25 +++++++ 3 files changed, 105 insertions(+), 1 deletion(-) create mode 100644 keyboards/dztech/dz60rgb_ansi/v2_1/config.h create mode 100644 keyboards/dztech/dz60rgb_ansi/v2_1/rules.mk diff --git a/keyboards/dztech/dz60rgb_ansi/readme.md b/keyboards/dztech/dz60rgb_ansi/readme.md index aa15dda890..1d0ca38f4d 100644 --- a/keyboards/dztech/dz60rgb_ansi/readme.md +++ b/keyboards/dztech/dz60rgb_ansi/readme.md @@ -8,14 +8,16 @@ A hotswap 60% RGB keyboard. * Hardware Supported: DZtech DZ60RGB-ANSI V1 and V2 * Hardware Availability: [KBDfans](https://kbdfans.com/) -There are two versions of the DZ60RGB-ANSI. Please use the appropriate firmware for your board. +There are three versions of the DZ60RGB-ANSI. Please use the appropriate firmware for your board. * V1: STM32F303 (Arm), takes .bin files * V2: ATmega32U4 (AVR), takes .hex files +* V2.1: ATmega32U4 (AVR), takes .bin files Make example for this keyboard (after setting up your build environment): make dztech/dz60rgb_ansi/v1:default # Arm (STM32F303) make dztech/dz60rgb_ansi/v2:default # AVR (ATmega32U4) + make dztech/dz60rgb_ansi/v2_1:default # AVR (ATmega32U4) See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/dztech/dz60rgb_ansi/v2_1/config.h b/keyboards/dztech/dz60rgb_ansi/v2_1/config.h new file mode 100644 index 0000000000..ad310664a8 --- /dev/null +++ b/keyboards/dztech/dz60rgb_ansi/v2_1/config.h @@ -0,0 +1,77 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x445A +#define PRODUCT_ID 0x1221 +#define DEVICE_VER 0x0002 +#define MANUFACTURER DZTECH +#define PRODUCT DZ60RGB_ANSI + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { F5, F4, F1, B3, B2 } +#define MATRIX_COL_PINS { C7, F7, F6, F0, B0, B1, B4, D7, D6, D4, D5, D3, D2, B7 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 3 + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +#ifdef RGB_MATRIX_ENABLE +# define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects +# define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended +# define RGB_MATRIX_KEYPRESSES +# define RGB_MATRIX_FRAMEBUFFER_EFFECTS +# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define DISABLE_RGB_MATRIX_BAND_SAT +# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define DISABLE_RGB_MATRIX_SPLASH +# define DISABLE_RGB_MATRIX_MULTISPLASH +# define DISABLE_RGB_MATRIX_SOLID_SPLASH +# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +# define DISABLE_RGB_MATRIX_DIGITAL_RAIN +# define DRIVER_ADDR_1 0b1010000 +# define DRIVER_COUNT 1 +# define DRIVER_LED_TOTAL 61 +#endif diff --git a/keyboards/dztech/dz60rgb_ansi/v2_1/rules.mk b/keyboards/dztech/dz60rgb_ansi/v2_1/rules.mk new file mode 100644 index 0000000000..aa2092d4df --- /dev/null +++ b/keyboards/dztech/dz60rgb_ansi/v2_1/rules.mk @@ -0,0 +1,25 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = lufa-ms +BOOTLOADER_SIZE = 6144 + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +RGB_MATRIX_ENABLE = yes # Use RGB matrix +RGB_MATRIX_DRIVER = IS31FL3733 +LTO_ENABLE = yes From adc7cc5981561a537a2d83647bd84df3d4447ded Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Tue, 28 Sep 2021 16:38:34 +0000 Subject: [PATCH 142/595] Mechlovin Adelais: add support for full-length Right Shift (#14622) * add layout variants with 2.75u Right Shift * move layout alias to info.json * match info.json labels to matrix positions Edits the label keys in info.json to match the matrix position identifiers in adelais.h. * info.json: add line breaks between keyboard rows * info.json: use GitHub username in maintainer field --- keyboards/mechlovin/adelais/adelais.h | 28 ++++- keyboards/mechlovin/adelais/info.json | 167 +++++++++++++++++++++++++- 2 files changed, 188 insertions(+), 7 deletions(-) diff --git a/keyboards/mechlovin/adelais/adelais.h b/keyboards/mechlovin/adelais/adelais.h index 5a5673abc7..a6bd2477a3 100644 --- a/keyboards/mechlovin/adelais/adelais.h +++ b/keyboards/mechlovin/adelais/adelais.h @@ -46,4 +46,30 @@ { K40, KC_NO, K42, KC_NO, K44, KC_NO, K46, KC_NO, K48, KC_NO, K4A, KC_NO, KC_NO, K4D, K4E }, \ } -#define LAYOUT_all LAYOUT_alice_split_bs +#define LAYOUT_alice_split_bs_full_rshift( \ + K1E, K00, K01, K02, K03, K04, K05, K06, K07,K08,K09, K0A, K0B, K0C, K0D, K0E,\ + K2E, K10, K11, K12, K13, K14, K15, K16,K17,K18, K19, K1A, K1B, K1C, K1D,\ + K3E, K20, K21, K22, K23, K24, K25, K26,K27,K28, K29, K2A, K2B, K2D,\ + K30, K32, K33, K34, K35, K36, K37,K38,K39, K3A, K3B, K3D, K3C, \ + K40, K42, K44, K46, K48, K4A, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, K2E }, \ + { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, KC_NO, K42, KC_NO, K44, KC_NO, K46, KC_NO, K48, KC_NO, K4A, KC_NO, KC_NO, KC_NO, K4E }, \ +} + +#define LAYOUT_alice_full_rshift( \ + K1E, K00, K01, K02, K03, K04, K05, K06, K07,K08,K09, K0A, K0B, K0C, K0D, \ + K2E, K10, K11, K12, K13, K14, K15, K16,K17,K18, K19, K1A, K1B, K1C, K1D,\ + K3E, K20, K21, K22, K23, K24, K25, K26,K27,K28, K29, K2A, K2B, K2D,\ + K30, K32, K33, K34, K35, K36, K37,K38,K39, K3A, K3B, K3D, K3C, \ + K40, K42, K44, K46, K48, K4A, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, KC_NO }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, K2E }, \ + { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, KC_NO, K42, KC_NO, K44, KC_NO, K46, KC_NO, K48, KC_NO, K4A, KC_NO, KC_NO, KC_NO, K4E }, \ +} diff --git a/keyboards/mechlovin/adelais/info.json b/keyboards/mechlovin/adelais/info.json index 3ff03c2b62..7a858277e7 100644 --- a/keyboards/mechlovin/adelais/info.json +++ b/keyboards/mechlovin/adelais/info.json @@ -1,7 +1,10 @@ { "keyboard_name": "Adelais", "url": "", - "maintainer": "Team Mechlovin'", + "maintainer": "mechlovin", + "layout_aliases": { + "LAYOUT_all": "LAYOUT_alice_split_bs" + }, "layouts": { "LAYOUT_alice_split_bs": { "layout": [ @@ -21,6 +24,7 @@ {"label":"K0C", "x":15.5, "y":0}, {"label":"K0D", "x":16.5, "y":0}, {"label":"K0E", "x":17.5, "y":0}, + {"label":"K2E", "x":0, "y":1}, {"label":"K10", "x":1.5, "y":1, "w":1.5}, {"label":"K11", "x":3, "y":1}, @@ -36,6 +40,7 @@ {"label":"K1B", "x":15, "y":1}, {"label":"K1C", "x":16, "y":1}, {"label":"K1D", "x":17, "y":1, "w":1.5}, + {"label":"K3E", "x":0, "y":2}, {"label":"K20", "x":1.5, "y":2, "w":1.75}, {"label":"K21", "x":3.25, "y":2}, @@ -50,6 +55,7 @@ {"label":"K2A", "x":14.25, "y":2}, {"label":"K2B", "x":15.25, "y":2}, {"label":"K2D", "x":16.25, "y":2, "w":2.25}, + {"label":"K30", "x":1.5, "y":3, "w":2.25}, {"label":"K32", "x":3.75, "y":3}, {"label":"K33", "x":4.75, "y":3}, @@ -61,9 +67,10 @@ {"label":"K39", "x":11.75, "y":3}, {"label":"K3A", "x":12.75, "y":3}, {"label":"K3B", "x":13.75, "y":3}, - {"label":"K4D", "x":14.75, "y":3}, + {"label":"K3D", "x":14.75, "y":3}, {"label":"K3C", "x":15.75, "y":3, "w":1.75}, - {"label":"K3D", "x":17.5, "y":3}, + {"label":"K4D", "x":17.5, "y":3}, + {"label":"K40", "x":1.5, "y":4, "w":1.5}, {"label":"K42", "x":4.5, "y":4, "w":1.25}, {"label":"K44", "x":5.75, "y":4, "w":2.25}, @@ -90,6 +97,7 @@ {"label":"K0B", "x":14.5, "y":0}, {"label":"K0C", "x":15.5, "y":0}, {"label":"K0D", "x":16.5, "y":0, "w":2}, + {"label":"K2E", "x":0, "y":1}, {"label":"K10", "x":1.5, "y":1, "w":1.5}, {"label":"K11", "x":3, "y":1}, @@ -105,6 +113,7 @@ {"label":"K1B", "x":15, "y":1}, {"label":"K1C", "x":16, "y":1}, {"label":"K1D", "x":17, "y":1, "w":1.5}, + {"label":"K3E", "x":0, "y":2}, {"label":"K20", "x":1.5, "y":2, "w":1.75}, {"label":"K21", "x":3.25, "y":2}, @@ -119,6 +128,7 @@ {"label":"K2A", "x":14.25, "y":2}, {"label":"K2B", "x":15.25, "y":2}, {"label":"K2D", "x":16.25, "y":2, "w":2.25}, + {"label":"K30", "x":1.5, "y":3, "w":2.25}, {"label":"K32", "x":3.75, "y":3}, {"label":"K33", "x":4.75, "y":3}, @@ -130,9 +140,155 @@ {"label":"K39", "x":11.75, "y":3}, {"label":"K3A", "x":12.75, "y":3}, {"label":"K3B", "x":13.75, "y":3}, - {"label":"K4D", "x":14.75, "y":3}, + {"label":"K3D", "x":14.75, "y":3}, {"label":"K3C", "x":15.75, "y":3, "w":1.75}, - {"label":"K3D", "x":17.5, "y":3}, + {"label":"K4D", "x":17.5, "y":3}, + + {"label":"K40", "x":1.5, "y":4, "w":1.5}, + {"label":"K42", "x":4.5, "y":4, "w":1.25}, + {"label":"K44", "x":5.75, "y":4, "w":2.25}, + {"label":"K46", "x":8, "y":4, "w":1.25}, + {"label":"K48", "x":9.75, "y":4, "w":2.75}, + {"label":"K4A", "x":12.5, "y":4, "w":1.25}, + {"label":"K4E", "x":17, "y":4, "w":1.5} + ] + }, + "LAYOUT_alice_split_bs_full_rshift": { + "layout": [ + {"label":"K1E", "x":0, "y":0}, + {"label":"K00", "x":1.5, "y":0}, + {"label":"K01", "x":2.5, "y":0}, + {"label":"K02", "x":3.5, "y":0}, + {"label":"K03", "x":4.5, "y":0}, + {"label":"K04", "x":5.5, "y":0}, + {"label":"K05", "x":6.5, "y":0}, + {"label":"K06", "x":7.5, "y":0}, + {"label":"K07", "x":10.5, "y":0}, + {"label":"K08", "x":11.5, "y":0}, + {"label":"K09", "x":12.5, "y":0}, + {"label":"K0A", "x":13.5, "y":0}, + {"label":"K0B", "x":14.5, "y":0}, + {"label":"K0C", "x":15.5, "y":0}, + {"label":"K0D", "x":16.5, "y":0}, + {"label":"K0E", "x":17.5, "y":0}, + + {"label":"K2E", "x":0, "y":1}, + {"label":"K10", "x":1.5, "y":1, "w":1.5}, + {"label":"K11", "x":3, "y":1}, + {"label":"K12", "x":4, "y":1}, + {"label":"K13", "x":5, "y":1}, + {"label":"K14", "x":6, "y":1}, + {"label":"K15", "x":7, "y":1}, + {"label":"K16", "x":10, "y":1}, + {"label":"K17", "x":11, "y":1}, + {"label":"K18", "x":12, "y":1}, + {"label":"K19", "x":13, "y":1}, + {"label":"K1A", "x":14, "y":1}, + {"label":"K1B", "x":15, "y":1}, + {"label":"K1C", "x":16, "y":1}, + {"label":"K1D", "x":17, "y":1, "w":1.5}, + + {"label":"K3E", "x":0, "y":2}, + {"label":"K20", "x":1.5, "y":2, "w":1.75}, + {"label":"K21", "x":3.25, "y":2}, + {"label":"K22", "x":4.25, "y":2}, + {"label":"K23", "x":5.25, "y":2}, + {"label":"K24", "x":6.25, "y":2}, + {"label":"K25", "x":7.25, "y":2}, + {"label":"K26", "x":10.25, "y":2}, + {"label":"K27", "x":11.25, "y":2}, + {"label":"K28", "x":12.25, "y":2}, + {"label":"K29", "x":13.25, "y":2}, + {"label":"K2A", "x":14.25, "y":2}, + {"label":"K2B", "x":15.25, "y":2}, + {"label":"K2D", "x":16.25, "y":2, "w":2.25}, + + {"label":"K30", "x":1.5, "y":3, "w":2.25}, + {"label":"K32", "x":3.75, "y":3}, + {"label":"K33", "x":4.75, "y":3}, + {"label":"K34", "x":5.75, "y":3}, + {"label":"K35", "x":6.75, "y":3}, + {"label":"K36", "x":7.75, "y":3}, + {"label":"K37", "x":9.75, "y":3}, + {"label":"K38", "x":10.75, "y":3}, + {"label":"K39", "x":11.75, "y":3}, + {"label":"K3A", "x":12.75, "y":3}, + {"label":"K3B", "x":13.75, "y":3}, + {"label":"K3D", "x":14.75, "y":3}, + {"label":"K3C", "x":15.75, "y":3, "w":2.75}, + + {"label":"K40", "x":1.5, "y":4, "w":1.5}, + {"label":"K42", "x":4.5, "y":4, "w":1.25}, + {"label":"K44", "x":5.75, "y":4, "w":2.25}, + {"label":"K46", "x":8, "y":4, "w":1.25}, + {"label":"K48", "x":9.75, "y":4, "w":2.75}, + {"label":"K4A", "x":12.5, "y":4, "w":1.25}, + {"label":"K4E", "x":17, "y":4, "w":1.5} + ] + }, + "LAYOUT_alice_full_rshift": { + "layout": [ + {"label":"K1E", "x":0, "y":0}, + {"label":"K00", "x":1.5, "y":0}, + {"label":"K01", "x":2.5, "y":0}, + {"label":"K02", "x":3.5, "y":0}, + {"label":"K03", "x":4.5, "y":0}, + {"label":"K04", "x":5.5, "y":0}, + {"label":"K05", "x":6.5, "y":0}, + {"label":"K06", "x":7.5, "y":0}, + {"label":"K07", "x":10.5, "y":0}, + {"label":"K08", "x":11.5, "y":0}, + {"label":"K09", "x":12.5, "y":0}, + {"label":"K0A", "x":13.5, "y":0}, + {"label":"K0B", "x":14.5, "y":0}, + {"label":"K0C", "x":15.5, "y":0}, + {"label":"K0D", "x":16.5, "y":0, "w":2}, + + {"label":"K2E", "x":0, "y":1}, + {"label":"K10", "x":1.5, "y":1, "w":1.5}, + {"label":"K11", "x":3, "y":1}, + {"label":"K12", "x":4, "y":1}, + {"label":"K13", "x":5, "y":1}, + {"label":"K14", "x":6, "y":1}, + {"label":"K15", "x":7, "y":1}, + {"label":"K16", "x":10, "y":1}, + {"label":"K17", "x":11, "y":1}, + {"label":"K18", "x":12, "y":1}, + {"label":"K19", "x":13, "y":1}, + {"label":"K1A", "x":14, "y":1}, + {"label":"K1B", "x":15, "y":1}, + {"label":"K1C", "x":16, "y":1}, + {"label":"K1D", "x":17, "y":1, "w":1.5}, + + {"label":"K3E", "x":0, "y":2}, + {"label":"K20", "x":1.5, "y":2, "w":1.75}, + {"label":"K21", "x":3.25, "y":2}, + {"label":"K22", "x":4.25, "y":2}, + {"label":"K23", "x":5.25, "y":2}, + {"label":"K24", "x":6.25, "y":2}, + {"label":"K25", "x":7.25, "y":2}, + {"label":"K26", "x":10.25, "y":2}, + {"label":"K27", "x":11.25, "y":2}, + {"label":"K28", "x":12.25, "y":2}, + {"label":"K29", "x":13.25, "y":2}, + {"label":"K2A", "x":14.25, "y":2}, + {"label":"K2B", "x":15.25, "y":2}, + {"label":"K2D", "x":16.25, "y":2, "w":2.25}, + + {"label":"K30", "x":1.5, "y":3, "w":2.25}, + {"label":"K32", "x":3.75, "y":3}, + {"label":"K33", "x":4.75, "y":3}, + {"label":"K34", "x":5.75, "y":3}, + {"label":"K35", "x":6.75, "y":3}, + {"label":"K36", "x":7.75, "y":3}, + {"label":"K37", "x":9.75, "y":3}, + {"label":"K38", "x":10.75, "y":3}, + {"label":"K39", "x":11.75, "y":3}, + {"label":"K3A", "x":12.75, "y":3}, + {"label":"K3B", "x":13.75, "y":3}, + {"label":"K3D", "x":14.75, "y":3}, + {"label":"K3C", "x":15.75, "y":3, "w":2.75}, + {"label":"K40", "x":1.5, "y":4, "w":1.5}, {"label":"K42", "x":4.5, "y":4, "w":1.25}, {"label":"K44", "x":5.75, "y":4, "w":2.25}, @@ -143,5 +299,4 @@ ] } } - ,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/" } From ac1d48cbf550322c88b51d6ade56eebfb46969fa Mon Sep 17 00:00:00 2001 From: Harshit Goel Date: Wed, 29 Sep 2021 00:30:34 +0530 Subject: [PATCH 143/595] [Keyboard] Pteron36 (#13475) Co-authored-by: Ryan Co-authored-by: Harshti Goel --- keyboards/pteron36/config.h | 14 ++++- keyboards/pteron36/keymaps/default/keymap.c | 2 +- keyboards/pteron36/keymaps/via/keymap.c | 59 ++++++++++++++++++++- keyboards/pteron36/keymaps/via/readme.md | 2 +- keyboards/pteron36/keymaps/via/rules.mk | 2 +- keyboards/pteron36/pteron36.c | 51 +++++++++++++++++- keyboards/pteron36/readme.md | 13 +++-- keyboards/pteron36/rules.mk | 8 +-- 8 files changed, 136 insertions(+), 15 deletions(-) diff --git a/keyboards/pteron36/config.h b/keyboards/pteron36/config.h index dcc9d68c78..d6f31514e6 100644 --- a/keyboards/pteron36/config.h +++ b/keyboards/pteron36/config.h @@ -152,4 +152,16 @@ along with this program. If not, see . //#define BOOTMAGIC_LITE_ROW 0 //#define BOOTMAGIC_LITE_COLUMN 0 // for via -#define DYNAMIC_KEYMAP_LAYER_COUNT 7 \ No newline at end of file +#define DYNAMIC_KEYMAP_LAYER_COUNT 7 + +//left encoder +#define ENCODERS_PAD_A { F5 } +#define ENCODERS_PAD_B { F4 } + +//right encoder +#define ENCODERS_PAD_A_RIGHT { F4 } +#define ENCODERS_PAD_B_RIGHT { F5 } + +//RGB Underglow +#define RGB_DI_PIN B6 +#define RGBLED_NUM 10 \ No newline at end of file diff --git a/keyboards/pteron36/keymaps/default/keymap.c b/keyboards/pteron36/keymaps/default/keymap.c index 11d00bb318..0cc0e2b471 100644 --- a/keyboards/pteron36/keymaps/default/keymap.c +++ b/keyboards/pteron36/keymaps/default/keymap.c @@ -32,4 +32,4 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_Z, KC_X, KC_C, KC_V, KC_B,KC_LBRACKET, KC_RBRACKET, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LGUI, KC_BSPC, KC_SPC, KC_SPC, KC_ENT, KC_RALT - )}; \ No newline at end of file + )}; diff --git a/keyboards/pteron36/keymaps/via/keymap.c b/keyboards/pteron36/keymaps/via/keymap.c index 1c614596eb..9e467dcde5 100644 --- a/keyboards/pteron36/keymaps/via/keymap.c +++ b/keyboards/pteron36/keymaps/via/keymap.c @@ -81,4 +81,61 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ) -}; \ No newline at end of file +}; + +#ifdef OLED_DRIVER_ENABLE + +static void render_logo(void) { + static const char PROGMEM qmk_logo[] = { + 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F, 0x90, 0x91, 0x92, 0x93, 0x94, + 0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8, 0xA9, 0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0xAF, 0xB0, 0xB1, 0xB2, 0xB3, 0xB4, + 0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, 0xC9, 0xCA, 0xCB, 0xCC, 0xCD, 0xCE, 0xCF, 0xD0, 0xD1, 0xD2, 0xD3, 0xD4, 0x00 + }; + + oled_write_P(qmk_logo, false); +} +static void render_status(void){ + oled_write_P(PSTR("Layer: "), false); + + switch (get_highest_layer(layer_state)) { + case _QWERTY: + oled_write_P(PSTR("Default\n"), false); + break; + case _SYMB: + oled_write_P(PSTR("Symbol\n"), false); + break; + case _NAV: + oled_write_P(PSTR("Nav\n"), false); + break; + case _ADJUST: + oled_write_P(PSTR("Adjust\n"), false); + break; + case _MOUSE: + oled_write_P(PSTR("Mouse\n"), false); + break; + case _NUMB: + oled_write_P(PSTR("Number\n"), false); + break; + case _FNR: + oled_write_P(PSTR("FunR\n"), false); + break; + default: + // Or use the write_ln shortcut over adding '\n' to the end of your string + oled_write_ln_P(PSTR("Undefined"), false); + } + + // Host Keyboard LED Status + led_t led_state = host_keyboard_led_state(); + oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false); + oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false); + oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false); +} +void oled_task_user(void) { + if (is_keyboard_master()) { + render_status(); // Renders the current keyboard state (layer, lock, caps, scroll, etc) + } else { + render_logo(); // Renders a static logo + oled_scroll_left(); // Turns on scrolling + } +} +#endif diff --git a/keyboards/pteron36/keymaps/via/readme.md b/keyboards/pteron36/keymaps/via/readme.md index 32ab1253d7..5bde196156 100644 --- a/keyboards/pteron36/keymaps/via/readme.md +++ b/keyboards/pteron36/keymaps/via/readme.md @@ -1 +1 @@ -# Default keymap for Redox Wireless +# Default keymap for via \ No newline at end of file diff --git a/keyboards/pteron36/keymaps/via/rules.mk b/keyboards/pteron36/keymaps/via/rules.mk index 43061db1dd..36b7ba9cbc 100644 --- a/keyboards/pteron36/keymaps/via/rules.mk +++ b/keyboards/pteron36/keymaps/via/rules.mk @@ -1,2 +1,2 @@ VIA_ENABLE = yes -LTO_ENABLE = yes \ No newline at end of file +LTO_ENABLE = yes diff --git a/keyboards/pteron36/pteron36.c b/keyboards/pteron36/pteron36.c index 4f06d822de..3288626f00 100644 --- a/keyboards/pteron36/pteron36.c +++ b/keyboards/pteron36/pteron36.c @@ -14,4 +14,53 @@ * along with this program. If not, see . */ -#include "pteron36.h" \ No newline at end of file +#include "pteron36.h" + +//common encoder setup + +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + if (index == 0) { /* First encoder */ + if (clockwise) { + tap_code(KC__VOLUP); + } else { + tap_code(KC__VOLDOWN); + } + } else if (index == 1) { /* Second encoder */ + if (clockwise) { + tap_code(KC_PGUP); + } else { + tap_code(KC_PGDN); + } + } + return true; +} +//common oled support. +#ifdef OLED_DRIVER_ENABLE +__attribute__((weak)) void oled_task_user(void) { + if (is_keyboard_master()) { + oled_write_P(PSTR("Layer: "), false); + switch (get_highest_layer(layer_state)) { + case _QWERTY: + oled_write_ln_P(PSTR("Default"), false); + break; + default: + // Or use the write_ln shortcut over adding '\n' to the end of your string + oled_write_ln_P(PSTR("Undefined"), false); + } + // Host Keyboard LED Status + led_t led_state = host_keyboard_led_state(); + oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false); + oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false); + oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false); + } else { + static const char PROGMEM qmk_logo[] = { + 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F, 0x90, 0x91, 0x92, 0x93, 0x94, + 0xA0, 0xA1, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8, 0xA9, 0xAA, 0xAB, 0xAC, 0xAD, 0xAE, 0xAF, 0xB0, 0xB1, 0xB2, 0xB3, 0xB4, + 0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8, 0xC9, 0xCA, 0xCB, 0xCC, 0xCD, 0xCE, 0xCF, 0xD0, 0xD1, 0xD2, 0xD3, 0xD4, 0x00 + }; + oled_write_P(qmk_logo, false); + oled_scroll_left(); // Turns on scrolling + } +} +#endif diff --git a/keyboards/pteron36/readme.md b/keyboards/pteron36/readme.md index b9e919c756..a68c7a55b4 100644 --- a/keyboards/pteron36/readme.md +++ b/keyboards/pteron36/readme.md @@ -20,12 +20,15 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to ## Default Keymap and Miryoku Layout support -The keyboard was designed with miryoku layout in mind. The default layout is very basic and does not have much use. I will be opening a pr to make the keyboard available with miryoku layout soon. Currently to build the keyboard with miryoku you will have to checkout latest miryoku qmk repo, and add the keyboard folder there manually. After copying the folder run the following command +The keyboard was designed with miryoku layout in mind. The default layout is very basic and does not have much use, modify the keymap as you see fit. Build keyboard with manna-harbour_miryoku as keymap, qmk should compile the firmare without any issue. + + make pteron36:manna-harbour_miryoku - make pteron36:manna-harbour_miryoku - Add miryoku params as required. +Pteron36 uses community layout, hence there is no need for separate keymap folder for any keymap that support 5x3_3 layout. + +## VIA support -## OLED and RotaryEncoder +The VIA keymap is working as intended. -I am working on adding OLED and RotaryEncoder support in keyboard config. + make pteron36:via diff --git a/keyboards/pteron36/rules.mk b/keyboards/pteron36/rules.mk index 64a21b2e9b..278246b371 100644 --- a/keyboards/pteron36/rules.mk +++ b/keyboards/pteron36/rules.mk @@ -17,10 +17,10 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output - -OLED_ENABLE = no # OLED display; work in progress to add support. will be update in future. -SPLIT_KEYBOARD = yes +OLED_DRIVER_ENABLE = yes # OLED display +ENCODER_ENABLE = yes # Encoder support +SPLIT_KEYBOARD = yes # Split enable LAYOUTS = split_3x5_3 From bc818352a309043b487ca2ad6b8e0ea10f8672b4 Mon Sep 17 00:00:00 2001 From: Alexander Kagno Date: Tue, 28 Sep 2021 13:21:10 -0600 Subject: [PATCH 144/595] [Keymap] arkag userspace/keymap -- new macro and minor preonic keymap change (#14623) Co-authored-by: Ryan --- keyboards/preonic/keymaps/arkag/keymap.c | 4 ++-- users/arkag/arkag.c | 4 ++++ 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/keyboards/preonic/keymaps/arkag/keymap.c b/keyboards/preonic/keymaps/arkag/keymap.c index 42b875d677..5e50c584af 100644 --- a/keyboards/preonic/keymaps/arkag/keymap.c +++ b/keyboards/preonic/keymaps/arkag/keymap.c @@ -20,11 +20,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_QWERTY] = LAYOUT_preonic_grid( - M_EHYPR, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, M_EHYPR, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, XXXXXXX, KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, - KC_LCTL, KC_LGUI, KC_LALT, MEDIA, SYMBOL, KC_SPC, M_LMHYP, ARROW, FUNCT, XXXXXXX, KC_RALT, KC_LEAD), + KC_LCTL, KC_LGUI, KC_LALT, MEDIA, SYMBOL, KC_SPC, KC_LEAD, ARROW, FUNCT, XXXXXXX, KC_RALT, KC_LEAD), [_SYMBOL] = LAYOUT_preonic_grid( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, diff --git a/users/arkag/arkag.c b/users/arkag/arkag.c index ea716ecdab..da85d4f6d4 100644 --- a/users/arkag/arkag.c +++ b/users/arkag/arkag.c @@ -392,6 +392,10 @@ void matrix_scan_user(void) { // end format functions // start fancy functions + SEQ_TWO_KEYS(KC_V, KC_P) { + SEND_STRING("ggvG}x:set paste\ni"); + pri_mod_keystroke(KC_V); + } SEQ_THREE_KEYS(KC_C, KC_C, KC_ENT) { surround_type(6, KC_GRAVE, false); pri_mod_keystroke(KC_V); From 4a2062cc0169785a6cd51a4a5de2bda8f0f78a40 Mon Sep 17 00:00:00 2001 From: owlab-git <88034417+owlab-git@users.noreply.github.com> Date: Wed, 29 Sep 2021 03:22:56 +0800 Subject: [PATCH 145/595] [Keyboard] Add OwLab Suit80 (#14362) * add suit80 files * first add suit80 files * modified suit80 files * layout change * modified again * changed png url --- keyboards/owlab/suit80/ansi/ansi.c | 17 ++ keyboards/owlab/suit80/ansi/ansi.h | 36 ++++ keyboards/owlab/suit80/ansi/config.h | 46 +++++ keyboards/owlab/suit80/ansi/info.json | 98 +++++++++ .../suit80/ansi/keymaps/default/keymap.c | 41 ++++ .../owlab/suit80/ansi/keymaps/via/keymap.c | 57 ++++++ .../owlab/suit80/ansi/keymaps/via/rules.mk | 2 + keyboards/owlab/suit80/ansi/readme.md | 21 ++ keyboards/owlab/suit80/ansi/rules.mk | 21 ++ keyboards/owlab/suit80/iso/config.h | 46 +++++ keyboards/owlab/suit80/iso/info.json | 192 ++++++++++++++++++ keyboards/owlab/suit80/iso/iso.c | 19 ++ keyboards/owlab/suit80/iso/iso.h | 52 +++++ .../owlab/suit80/iso/keymaps/default/keymap.c | 41 ++++ .../owlab/suit80/iso/keymaps/via/keymap.c | 56 +++++ .../owlab/suit80/iso/keymaps/via/rules.mk | 2 + keyboards/owlab/suit80/iso/readme.md | 21 ++ keyboards/owlab/suit80/iso/rules.mk | 21 ++ 18 files changed, 789 insertions(+) create mode 100644 keyboards/owlab/suit80/ansi/ansi.c create mode 100644 keyboards/owlab/suit80/ansi/ansi.h create mode 100644 keyboards/owlab/suit80/ansi/config.h create mode 100644 keyboards/owlab/suit80/ansi/info.json create mode 100644 keyboards/owlab/suit80/ansi/keymaps/default/keymap.c create mode 100644 keyboards/owlab/suit80/ansi/keymaps/via/keymap.c create mode 100644 keyboards/owlab/suit80/ansi/keymaps/via/rules.mk create mode 100644 keyboards/owlab/suit80/ansi/readme.md create mode 100644 keyboards/owlab/suit80/ansi/rules.mk create mode 100644 keyboards/owlab/suit80/iso/config.h create mode 100644 keyboards/owlab/suit80/iso/info.json create mode 100644 keyboards/owlab/suit80/iso/iso.c create mode 100644 keyboards/owlab/suit80/iso/iso.h create mode 100644 keyboards/owlab/suit80/iso/keymaps/default/keymap.c create mode 100644 keyboards/owlab/suit80/iso/keymaps/via/keymap.c create mode 100644 keyboards/owlab/suit80/iso/keymaps/via/rules.mk create mode 100644 keyboards/owlab/suit80/iso/readme.md create mode 100644 keyboards/owlab/suit80/iso/rules.mk diff --git a/keyboards/owlab/suit80/ansi/ansi.c b/keyboards/owlab/suit80/ansi/ansi.c new file mode 100644 index 0000000000..7e75773f1d --- /dev/null +++ b/keyboards/owlab/suit80/ansi/ansi.c @@ -0,0 +1,17 @@ +/* +Copyright 2021 owlab + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include "ansi.h" diff --git a/keyboards/owlab/suit80/ansi/ansi.h b/keyboards/owlab/suit80/ansi/ansi.h new file mode 100644 index 0000000000..d01296f2c1 --- /dev/null +++ b/keyboards/owlab/suit80/ansi/ansi.h @@ -0,0 +1,36 @@ +/* +Copyright 2021 owlab + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "quantum.h" + +#define LAYOUT_ansi( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K114, K214, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K313, K314, K412, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K413, K414, K510, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, \ + K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K511, \ + K500, K501, K502, K504, K507, K508, K509, K512, K513, K514 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214 }, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314 }, \ + { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414 }, \ + { K500, K501, K502, KC_NO, K504, KC_NO, KC_NO, K507, K508, K509, K510, K511, K512, K513, K514 } \ +} diff --git a/keyboards/owlab/suit80/ansi/config.h b/keyboards/owlab/suit80/ansi/config.h new file mode 100644 index 0000000000..02c44da212 --- /dev/null +++ b/keyboards/owlab/suit80/ansi/config.h @@ -0,0 +1,46 @@ +/* +Copyright 2021 owlab + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4F53 //0x4F53 OS for owl studio +#define PRODUCT_ID 0x5355 //0x5355 SU for SUIT +#define DEVICE_VER 0x0001 +#define MANUFACTURER OwLab +#define PRODUCT SUIT80 + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 15 + +/* Keyboard Matrix Assignments */ +#define MATRIX_ROW_PINS { E6, B0, B7, D0, D1, D2 } +#define MATRIX_COL_PINS { D5, D4, D6, D7, B4, B5, B6, C6, C7, F4, F7, F6, F5, F1, F0 } + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* NKRO */ +#ifdef NKRO_ENABLE +# define FORCE_NKRO +#endif \ No newline at end of file diff --git a/keyboards/owlab/suit80/ansi/info.json b/keyboards/owlab/suit80/ansi/info.json new file mode 100644 index 0000000000..b5833c6a60 --- /dev/null +++ b/keyboards/owlab/suit80/ansi/info.json @@ -0,0 +1,98 @@ +{ + "keyboard_name": "suit80", + "url": "", + "maintainer": "Owlab", + "layouts": { + "LAYOUT_ansi": { + "layout": [ + {"x":0, "y":0}, + {"x":1.25, "y":0}, + {"x":2.25, "y":0}, + {"x":3.25, "y":0}, + {"x":4.25, "y":0}, + {"x":5.5, "y":0}, + {"x":6.5, "y":0}, + {"x":7.5, "y":0}, + {"x":8.5, "y":0}, + {"x":9.75, "y":0}, + {"x":10.75, "y":0}, + {"x":11.75, "y":0}, + {"x":12.75, "y":0}, + {"x":14, "y":0}, + {"x":15.25, "y":0}, + {"x":16.25, "y":0}, + {"x":17.25, "y":0}, + {"x":0, "y":1.25}, + {"x":1, "y":1.25}, + {"x":2, "y":1.25}, + {"x":3, "y":1.25}, + {"x":4, "y":1.25}, + {"x":5, "y":1.25}, + {"x":6, "y":1.25}, + {"x":7, "y":1.25}, + {"x":8, "y":1.25}, + {"x":9, "y":1.25}, + {"x":10, "y":1.25}, + {"x":11, "y":1.25}, + {"x":12, "y":1.25}, + {"x":13, "y":1.25, "w":2}, + {"x":15.25, "y":1.25}, + {"x":16.25, "y":1.25}, + {"x":17.25, "y":1.25}, + {"x":0, "y":2.25, "w":1.5}, + {"x":1.5, "y":2.25}, + {"x":2.5, "y":2.25}, + {"x":3.5, "y":2.25}, + {"x":4.5, "y":2.25}, + {"x":5.5, "y":2.25}, + {"x":6.5, "y":2.25}, + {"x":7.5, "y":2.25}, + {"x":8.5, "y":2.25}, + {"x":9.5, "y":2.25}, + {"x":10.5, "y":2.25}, + {"x":11.5, "y":2.25}, + {"x":12.5, "y":2.25}, + {"x":13.5, "y":2.25, "w":1.5}, + {"x":15.25, "y":2.25}, + {"x":16.25, "y":2.25}, + {"x":17.25, "y":2.25}, + {"x":0, "y":3.25, "w":1.75}, + {"x":1.75, "y":3.25}, + {"x":2.75, "y":3.25}, + {"x":3.75, "y":3.25}, + {"x":4.75, "y":3.25}, + {"x":5.75, "y":3.25}, + {"x":6.75, "y":3.25}, + {"x":7.75, "y":3.25}, + {"x":8.75, "y":3.25}, + {"x":9.75, "y":3.25}, + {"x":10.75, "y":3.25}, + {"x":11.75, "y":3.25}, + {"x":12.75, "y":3.25, "w":2.25}, + {"x":0, "y":4.25, "w":2.25}, + {"x":2.25, "y":4.25}, + {"x":3.25, "y":4.25}, + {"x":4.25, "y":4.25}, + {"x":5.25, "y":4.25}, + {"x":6.25, "y":4.25}, + {"x":7.25, "y":4.25}, + {"x":8.25, "y":4.25}, + {"x":9.25, "y":4.25}, + {"x":10.25, "y":4.25}, + {"x":11.25, "y":4.25}, + {"x":12.25, "y":4.25, "w":2.75}, + {"x":16.25, "y":4.25}, + {"x":0, "y":5.25, "w":1.5}, + {"x":1.5, "y":5.25}, + {"x":2.5, "y":5.25, "w":1.5}, + {"x":4, "y":5.25, "w":7}, + {"x":11, "y":5.25, "w":1.5}, + {"x":12.5, "y":5.25}, + {"x":13.5, "y":5.25, "w":1.5}, + {"x":15.25, "y":5.25}, + {"x":16.25, "y":5.25}, + {"x":17.25, "y":5.25} + ] + } + } +} \ No newline at end of file diff --git a/keyboards/owlab/suit80/ansi/keymaps/default/keymap.c b/keyboards/owlab/suit80/ansi/keymaps/default/keymap.c new file mode 100644 index 0000000000..e9ab5f323f --- /dev/null +++ b/keyboards/owlab/suit80/ansi/keymaps/default/keymap.c @@ -0,0 +1,41 @@ +/* +Copyright 2021 owlab + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include QMK_KEYBOARD_H + + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + + + [0] = LAYOUT_ansi( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT + ), + [1] = LAYOUT_ansi( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/owlab/suit80/ansi/keymaps/via/keymap.c b/keyboards/owlab/suit80/ansi/keymaps/via/keymap.c new file mode 100644 index 0000000000..d438aea409 --- /dev/null +++ b/keyboards/owlab/suit80/ansi/keymaps/via/keymap.c @@ -0,0 +1,57 @@ +/* +Copyright 2021 owlab + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + + [0] = LAYOUT_ansi( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT + ), + [1] = LAYOUT_ansi( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + [2] = LAYOUT_ansi( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + [3] = LAYOUT_ansi( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; \ No newline at end of file diff --git a/keyboards/owlab/suit80/ansi/keymaps/via/rules.mk b/keyboards/owlab/suit80/ansi/keymaps/via/rules.mk new file mode 100644 index 0000000000..36b7ba9cbc --- /dev/null +++ b/keyboards/owlab/suit80/ansi/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/owlab/suit80/ansi/readme.md b/keyboards/owlab/suit80/ansi/readme.md new file mode 100644 index 0000000000..7d10fe1a57 --- /dev/null +++ b/keyboards/owlab/suit80/ansi/readme.md @@ -0,0 +1,21 @@ +# Suit80 - ANSI PCB + +![suit80](https://i.imgur.com/0QN23oc.png) + +A 80% made by Owlab. + +* Keyboard Maintainer: [owlab](https://github.com/owlab-git) +* Hardware Supported: Suit80 ANSI PCB +* Hardware Availability: Ended groupbuy: https://www.zfrontier.com/app/flow/2Q1YEKykXmYZ + +Make example for this keyboard (after setting up your build environment): + + make owlab/suit80/ansi:default + +Flashing example for this keyboard: + + make owlab/suit80/ansi:default:flash + +**Bootloader:** Press the physical reset button on the bottom side of the PCB (labeled SW1) or hold down ESC while plugging in the board. + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/owlab/suit80/ansi/rules.mk b/keyboards/owlab/suit80/ansi/rules.mk new file mode 100644 index 0000000000..001898bf4c --- /dev/null +++ b/keyboards/owlab/suit80/ansi/rules.mk @@ -0,0 +1,21 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output \ No newline at end of file diff --git a/keyboards/owlab/suit80/iso/config.h b/keyboards/owlab/suit80/iso/config.h new file mode 100644 index 0000000000..22968bac15 --- /dev/null +++ b/keyboards/owlab/suit80/iso/config.h @@ -0,0 +1,46 @@ +/* +Copyright 2021 owlab + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4F53 // 0x4F53 OS for owl studio +#define PRODUCT_ID 0x5349 //0x5355 SI for SUIT ISO +#define DEVICE_VER 0x0001 +#define MANUFACTURER OwLab +#define PRODUCT SUIT80 ISO + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 15 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { E6, B0, B7, D0, D1, D2 } +#define MATRIX_COL_PINS { D5, D4, D6, D7, B4, B5, B6, C6, C7, F4, F7, F6, F5, F1, F0 } + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* NKRO */ +#ifdef NKRO_ENABLE +# define FORCE_NKRO +#endif diff --git a/keyboards/owlab/suit80/iso/info.json b/keyboards/owlab/suit80/iso/info.json new file mode 100644 index 0000000000..7c911fe361 --- /dev/null +++ b/keyboards/owlab/suit80/iso/info.json @@ -0,0 +1,192 @@ +{ + "keyboard_name": "suit80", + "url": "", + "maintainer": "Owlab", + "layouts": { + "LAYOUT_all": { + "layout": [ + {"x":0, "y":0}, + {"x":1.25, "y":0}, + {"x":2.25, "y":0}, + {"x":3.25, "y":0}, + {"x":4.25, "y":0}, + {"x":5.5, "y":0}, + {"x":6.5, "y":0}, + {"x":7.5, "y":0}, + {"x":8.5, "y":0}, + {"x":9.75, "y":0}, + {"x":10.75, "y":0}, + {"x":11.75, "y":0}, + {"x":12.75, "y":0}, + {"x":14, "y":0}, + {"x":15.25, "y":0}, + {"x":16.25, "y":0}, + {"x":17.25, "y":0}, + {"x":0, "y":1.25}, + {"x":1, "y":1.25}, + {"x":2, "y":1.25}, + {"x":3, "y":1.25}, + {"x":4, "y":1.25}, + {"x":5, "y":1.25}, + {"x":6, "y":1.25}, + {"x":7, "y":1.25}, + {"x":8, "y":1.25}, + {"x":9, "y":1.25}, + {"x":10, "y":1.25}, + {"x":11, "y":1.25}, + {"x":12, "y":1.25}, + {"x":13, "y":1.25}, + {"x":14, "y":1.25}, + {"x":15.25, "y":1.25}, + {"x":16.25, "y":1.25}, + {"x":17.25, "y":1.25}, + {"x":0, "y":2.25, "w":1.5}, + {"x":1.5, "y":2.25}, + {"x":2.5, "y":2.25}, + {"x":3.5, "y":2.25}, + {"x":4.5, "y":2.25}, + {"x":5.5, "y":2.25}, + {"x":6.5, "y":2.25}, + {"x":7.5, "y":2.25}, + {"x":8.5, "y":2.25}, + {"x":9.5, "y":2.25}, + {"x":10.5, "y":2.25}, + {"x":11.5, "y":2.25}, + {"x":12.5, "y":2.25}, + {"x":15.25, "y":2.25}, + {"x":16.25, "y":2.25}, + {"x":17.25, "y":2.25}, + {"x":0, "y":3.25, "w":1.75}, + {"x":1.75, "y":3.25}, + {"x":2.75, "y":3.25}, + {"x":3.75, "y":3.25}, + {"x":4.75, "y":3.25}, + {"x":5.75, "y":3.25}, + {"x":6.75, "y":3.25}, + {"x":7.75, "y":3.25}, + {"x":8.75, "y":3.25}, + {"x":9.75, "y":3.25}, + {"x":10.75, "y":3.25}, + {"x":11.75, "y":3.25}, + {"x":12.75, "y":3.25}, + {"x":13.75, "y":2.25, "w":1.25, "h":2}, + {"x":0, "y":4.25, "w":1.25}, + {"x":1.25, "y":4.25}, + {"x":2.25, "y":4.25}, + {"x":3.25, "y":4.25}, + {"x":4.25, "y":4.25}, + {"x":5.25, "y":4.25}, + {"x":6.25, "y":4.25}, + {"x":7.25, "y":4.25}, + {"x":8.25, "y":4.25}, + {"x":9.25, "y":4.25}, + {"x":10.25, "y":4.25}, + {"x":11.25, "y":4.25}, + {"x":12.25, "y":4.25, "w":2.75}, + {"x":16.25, "y":4.25}, + {"x":0, "y":5.25, "w":1.5}, + {"x":1.5, "y":5.25}, + {"x":2.5, "y":5.25, "w":1.5}, + {"x":4, "y":5.25, "w":7}, + {"x":11, "y":5.25, "w":1.5}, + {"x":12.5, "y":5.25}, + {"x":13.5, "y":5.25, "w":1.5}, + {"x":15.25, "y":5.25}, + {"x":16.25, "y":5.25}, + {"x":17.25, "y":5.25} + ] + }, + "LAYOUT_iso": { + "layout": [ + {"x":0, "y":0}, + {"x":1.25, "y":0}, + {"x":2.25, "y":0}, + {"x":3.25, "y":0}, + {"x":4.25, "y":0}, + {"x":5.5, "y":0}, + {"x":6.5, "y":0}, + {"x":7.5, "y":0}, + {"x":8.5, "y":0}, + {"x":9.75, "y":0}, + {"x":10.75, "y":0}, + {"x":11.75, "y":0}, + {"x":12.75, "y":0}, + {"x":14, "y":0}, + {"x":15.25, "y":0}, + {"x":16.25, "y":0}, + {"x":17.25, "y":0}, + {"x":0, "y":1.25}, + {"x":1, "y":1.25}, + {"x":2, "y":1.25}, + {"x":3, "y":1.25}, + {"x":4, "y":1.25}, + {"x":5, "y":1.25}, + {"x":6, "y":1.25}, + {"x":7, "y":1.25}, + {"x":8, "y":1.25}, + {"x":9, "y":1.25}, + {"x":10, "y":1.25}, + {"x":11, "y":1.25}, + {"x":12, "y":1.25}, + {"x":13, "y":1.25, "w":2}, + {"x":15.25, "y":1.25}, + {"x":16.25, "y":1.25}, + {"x":17.25, "y":1.25}, + {"x":0, "y":2.25, "w":1.5}, + {"x":1.5, "y":2.25}, + {"x":2.5, "y":2.25}, + {"x":3.5, "y":2.25}, + {"x":4.5, "y":2.25}, + {"x":5.5, "y":2.25}, + {"x":6.5, "y":2.25}, + {"x":7.5, "y":2.25}, + {"x":8.5, "y":2.25}, + {"x":9.5, "y":2.25}, + {"x":10.5, "y":2.25}, + {"x":11.5, "y":2.25}, + {"x":12.5, "y":2.25}, + {"x":15.25, "y":2.25}, + {"x":16.25, "y":2.25}, + {"x":17.25, "y":2.25}, + {"x":0, "y":3.25, "w":1.75}, + {"x":1.75, "y":3.25}, + {"x":2.75, "y":3.25}, + {"x":3.75, "y":3.25}, + {"x":4.75, "y":3.25}, + {"x":5.75, "y":3.25}, + {"x":6.75, "y":3.25}, + {"x":7.75, "y":3.25}, + {"x":8.75, "y":3.25}, + {"x":9.75, "y":3.25}, + {"x":10.75, "y":3.25}, + {"x":11.75, "y":3.25}, + {"x":12.75, "y":3.25}, + {"x":13.75, "y":2.25, "w":1.25, "h":2}, + {"x":0, "y":4.25, "w":1.25}, + {"x":1.25, "y":4.25}, + {"x":2.25, "y":4.25}, + {"x":3.25, "y":4.25}, + {"x":4.25, "y":4.25}, + {"x":5.25, "y":4.25}, + {"x":6.25, "y":4.25}, + {"x":7.25, "y":4.25}, + {"x":8.25, "y":4.25}, + {"x":9.25, "y":4.25}, + {"x":10.25, "y":4.25}, + {"x":11.25, "y":4.25}, + {"x":12.25, "y":4.25, "w":2.75}, + {"x":16.25, "y":4.25}, + {"x":0, "y":5.25, "w":1.5}, + {"x":1.5, "y":5.25}, + {"x":2.5, "y":5.25, "w":1.5}, + {"x":4, "y":5.25, "w":7}, + {"x":11, "y":5.25, "w":1.5}, + {"x":12.5, "y":5.25}, + {"x":13.5, "y":5.25, "w":1.5}, + {"x":15.25, "y":5.25}, + {"x":16.25, "y":5.25}, + {"x":17.25, "y":5.25} + ] + } + } +} \ No newline at end of file diff --git a/keyboards/owlab/suit80/iso/iso.c b/keyboards/owlab/suit80/iso/iso.c new file mode 100644 index 0000000000..e8f326d37e --- /dev/null +++ b/keyboards/owlab/suit80/iso/iso.c @@ -0,0 +1,19 @@ + + +/* +Copyright 2021 owlab + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include "iso.h" diff --git a/keyboards/owlab/suit80/iso/iso.h b/keyboards/owlab/suit80/iso/iso.h new file mode 100644 index 0000000000..77cc55b452 --- /dev/null +++ b/keyboards/owlab/suit80/iso/iso.h @@ -0,0 +1,52 @@ +/* +Copyright 2021 owlab + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "quantum.h" + +#define LAYOUT_all( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K114, K214, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K213, K113, K313, K314, K412, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K413, K414, K510, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K506, K312, \ + K400, K503, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K511, \ + K500, K501, K502, K504, K507, K508, K509, K512, K513, K514 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214 }, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314 }, \ + { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414 }, \ + { K500, K501, K502, K503, K504, KC_NO, K506, K507, K508, K509, K510, K511, K512, K513, K514 } \ +} + +#define LAYOUT_iso( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K114, K214, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K313, K314, K412, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K413, K414, K510, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K506, K312, \ + K400, K503, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K511, \ + K500, K501, K502, K504, K507, K508, K509, K512, K513, K514 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, KC_NO, K214 }, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314 }, \ + { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414 }, \ + { K500, K501, K502, K503, K504, KC_NO, K506, K507, K508, K509, K510, K511, K512, K513, K514 } \ +} \ No newline at end of file diff --git a/keyboards/owlab/suit80/iso/keymaps/default/keymap.c b/keyboards/owlab/suit80/iso/keymaps/default/keymap.c new file mode 100644 index 0000000000..84cfcc4ad2 --- /dev/null +++ b/keyboards/owlab/suit80/iso/keymaps/default/keymap.c @@ -0,0 +1,41 @@ +/* +Copyright 2021 owlab + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include QMK_KEYBOARD_H + + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_iso( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT + ), + [1] = LAYOUT_iso( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; + + diff --git a/keyboards/owlab/suit80/iso/keymaps/via/keymap.c b/keyboards/owlab/suit80/iso/keymaps/via/keymap.c new file mode 100644 index 0000000000..d392b797e8 --- /dev/null +++ b/keyboards/owlab/suit80/iso/keymaps/via/keymap.c @@ -0,0 +1,56 @@ +/* +Copyright 2021 owlab + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT + ), + [1] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [1] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [1] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/owlab/suit80/iso/keymaps/via/rules.mk b/keyboards/owlab/suit80/iso/keymaps/via/rules.mk new file mode 100644 index 0000000000..36b7ba9cbc --- /dev/null +++ b/keyboards/owlab/suit80/iso/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/owlab/suit80/iso/readme.md b/keyboards/owlab/suit80/iso/readme.md new file mode 100644 index 0000000000..c16dfa255d --- /dev/null +++ b/keyboards/owlab/suit80/iso/readme.md @@ -0,0 +1,21 @@ +# Suit80 - ISO PCB + +![suit80](https://i.imgur.com/wTUPZFB.jpg) + +A 80% made by Owlab. + +* Keyboard Maintainer: [owlab](https://github.com/owlab-git) +* Hardware Supported: Suit80 ISO PCB +* Hardware Availability: Ended groupbuy: https://www.zfrontier.com/app/flow/2Q1YEKykXmYZ + +Make example for this keyboard (after setting up your build environment): + + make owlab/suit80/iso:default + +Flashing example for this keyboard: + + make owlab/suit80/iso:default:flash + +**Bootloader:** Press the physical reset button on the bottom side of the PCB (labeled SW1) or hold down ESC while plugging in the board. + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/owlab/suit80/iso/rules.mk b/keyboards/owlab/suit80/iso/rules.mk new file mode 100644 index 0000000000..001898bf4c --- /dev/null +++ b/keyboards/owlab/suit80/iso/rules.mk @@ -0,0 +1,21 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output \ No newline at end of file From 724ee240751fdfedf33d75fee10d2b97d9f9e3da Mon Sep 17 00:00:00 2001 From: Greg Knapp Date: Tue, 28 Sep 2021 20:23:38 +0100 Subject: [PATCH 146/595] [Keyboard] Yampad VIA support (#14397) Co-authored-by: Drashna Jaelre --- keyboards/yampad/config.h | 2 +- keyboards/yampad/keymaps/via/keymap.c | 163 +++++++++++++++++++++++++ keyboards/yampad/keymaps/via/readme.md | 9 ++ keyboards/yampad/keymaps/via/rules.mk | 4 + keyboards/yampad/rules.mk | 21 ++-- 5 files changed, 187 insertions(+), 12 deletions(-) create mode 100644 keyboards/yampad/keymaps/via/keymap.c create mode 100644 keyboards/yampad/keymaps/via/readme.md create mode 100644 keyboards/yampad/keymaps/via/rules.mk diff --git a/keyboards/yampad/config.h b/keyboards/yampad/config.h index d04ae37d5a..b21a606ddc 100644 --- a/keyboards/yampad/config.h +++ b/keyboards/yampad/config.h @@ -20,7 +20,7 @@ along with this program. If not, see . #include "config_common.h" /* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED +#define VENDOR_ID 0x5950 // YP #define PRODUCT_ID 0x8369 #define DEVICE_VER 0x0001 #define MANUFACTURER Mattia Dal Ben diff --git a/keyboards/yampad/keymaps/via/keymap.c b/keyboards/yampad/keymaps/via/keymap.c new file mode 100644 index 0000000000..d22eb26177 --- /dev/null +++ b/keyboards/yampad/keymaps/via/keymap.c @@ -0,0 +1,163 @@ +/* MIT License + +Copyright (c) 2019 Mattia Dal Ben + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. +*/ + +#include QMK_KEYBOARD_H + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +enum layers { + _BL, + _NV, + _FN +}; + +enum custom_keycodes { + KC_DBL0 = SAFE_RANGE, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keymap _BL: (Base Layer) Default Layer + * ,-------------------. + * | NV | / | * |-/FN| + * |----|----|----|----| + * | 7 | 8 | 9 | | + * |----|----|----| + | + * | 4 | 5 | 6 | | + * |----|----|----|----| + * | 1 | 2 | 3 | | + * |----|----|----| En | + * | 0 | 00 | . | | + * `-------------------' + */ + [_BL] = LAYOUT( + TG(_NV), KC_PSLS, KC_PAST, LT(_FN, KC_PMNS), + KC_P7, KC_P8, KC_P9, + KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_P1, KC_P2, KC_P3, + KC_P0, KC_DBL0, KC_PDOT, KC_PENT + ), + +/* Keymap _NV: Navigation layer + * ,-------------------. + * |INS |HOME|PGUP| | + * |----|----|----|----| + * |DEL |END |PGDN| | + * |----|----|----| | + * | | | | | + * |----|----|----|----| + * | | UP | | | + * |----|----|----| | + * |LEFT|DOWN|RIGH| | + * `-------------------' + */ + [_NV] = LAYOUT( + KC_INS, KC_HOME, KC_PGUP, TG(_NV), + KC_DEL, KC_END, KC_PGDN, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, KC_UP, XXXXXXX, + KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX + ), + +/* Keymap _FN: RGB Function Layer + * ,-------------------. + * |RMOD|RGBP|RTOG| FN | + * |----|----|----|----| + * |HUD |HUI | | | + * |----|----|----| | + * |SAD |SAI | | | + * |----|----|----|----| + * |VAD |VAS | | | + * |----|----|----| | + * |RST | | | | + * `-------------------' + */ + [_FN] = LAYOUT( + RGB_MOD, RGB_M_P, RGB_TOG, _______, + RGB_HUD, RGB_HUI, XXXXXXX, + RGB_SAD, RGB_SAI, XXXXXXX, XXXXXXX, + RGB_VAD, RGB_VAI, XXXXXXX, + RESET, XXXXXXX, XXXXXXX, XXXXXXX + ), +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case KC_DBL0: + if (record->event.pressed) { + SEND_STRING("00"); + } else { + // when keycode KC_DBL0 is released + } + break; + + } + return true; +}; + +#ifdef OLED_ENABLE + +oled_rotation_t oled_init_user(oled_rotation_t rotation) { + return OLED_ROTATION_270; // flips the display 270 degrees +} + +void oled_task_user(void) { + // Host Keyboard Layer Status + oled_write_P(PSTR("Layer"), false); + switch (get_highest_layer(layer_state)) { + case _BL: + oled_write_ln_P(PSTR(" BAS"), false); + break; + case _NV: + oled_write_ln_P(PSTR(" NAV"), false); + break; + case _FN: + oled_write_ln_P(PSTR(" RGB"), false); + break; + default: + // Or use the write_ln shortcut over adding '\n' to the end of your string + oled_write_ln_P(PSTR(" UND"), false); + } + + // Host Keyboard LED Status + led_t led_state = host_keyboard_led_state(); + oled_write_P(PSTR("-----"), false); + oled_write_P(PSTR("Stats"), false); + oled_write_P(led_state.num_lock ? PSTR("num:*") : PSTR("num:."), false); + oled_write_P(led_state.caps_lock ? PSTR("cap:*") : PSTR("cap:."), false); + oled_write_P(led_state.scroll_lock ? PSTR("scr:*") : PSTR("scr:."), false); + + // Host Keyboard RGB backlight status + oled_write_P(PSTR("-----"), false); + oled_write_P(PSTR("Light"), false); + + static char led_buf[30]; + snprintf(led_buf, sizeof(led_buf) - 1, "RGB:%cM: %2d\nh: %2ds: %2dv: %2d\n", + rgblight_is_enabled() ? '*' : '.', (uint8_t)rgblight_get_mode(), + (uint8_t)(rgblight_get_hue() / RGBLIGHT_HUE_STEP), + (uint8_t)(rgblight_get_sat() / RGBLIGHT_SAT_STEP), + (uint8_t)(rgblight_get_val() / RGBLIGHT_VAL_STEP)); + oled_write(led_buf, false); +} +#endif diff --git a/keyboards/yampad/keymaps/via/readme.md b/keyboards/yampad/keymaps/via/readme.md new file mode 100644 index 0000000000..29ea4d3cdd --- /dev/null +++ b/keyboards/yampad/keymaps/via/readme.md @@ -0,0 +1,9 @@ +![Yampad Layout Image](https://i.imgur.com/QwrufEt.png) + +# VIA Yampad Layout + +This is the layout in the VIA enabled firmware. +Optional 2U zero key to suit your Yampad build. + +Compile: `make yampad:via` +Flash: `make yampad:via:flash` diff --git a/keyboards/yampad/keymaps/via/rules.mk b/keyboards/yampad/keymaps/via/rules.mk new file mode 100644 index 0000000000..9bf0baa685 --- /dev/null +++ b/keyboards/yampad/keymaps/via/rules.mk @@ -0,0 +1,4 @@ +EXTRAKEY_ENABLE = no +LTO_ENABLE = yes +MOUSEKEY_ENABLE = no +VIA_ENABLE = yes diff --git a/keyboards/yampad/rules.mk b/keyboards/yampad/rules.mk index 5e14808709..667620e93b 100644 --- a/keyboards/yampad/rules.mk +++ b/keyboards/yampad/rules.mk @@ -7,18 +7,17 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = no # Mouse keys -EXTRAKEY_ENABLE = no # Audio control and System control -CONSOLE_ENABLE = no # Console for debug +AUDIO_ENABLE = no # Audio output +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite COMMAND_ENABLE = no # Commands for debug and configuration -# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +CONSOLE_ENABLE = no # Console for debug +DEBOUNCE_TYPE = sym_eager_pk +EXTRAKEY_ENABLE = no # Audio control and System control +LTO_ENABLE = yes # Link time optimise, reduce firmware size +MOUSEKEY_ENABLE = no # Mouse keys # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -AUDIO_ENABLE = no # Audio output -OLED_ENABLE = yes OLED_DRIVER = SSD1306 -DEBOUNCE_TYPE = sym_eager_pk +OLED_ENABLE = yes +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow From 705cd433c22aad00b12183eaa3bada50d90fd97b Mon Sep 17 00:00:00 2001 From: jonavin <71780717+Jonavin@users.noreply.github.com> Date: Tue, 28 Sep 2021 15:24:12 -0400 Subject: [PATCH 147/595] [Keymap] fix NKRO - switch to get_mods() and refactor encoder action code (#14278) Co-authored-by: Jonavin <=> --- .../gmmk/pro/ansi/keymaps/jonavin/keymap.c | 37 +++++ .../gmmk/pro/ansi/keymaps/jonavin/readme.md | 1 + .../gmmk/pro/ansi/keymaps/jonavin/rules.mk | 2 +- .../keebio/quefrency/keymaps/jonavin/keymap.c | 55 +++----- .../mercutio/keymaps/jonavin/keymap.c | 75 ++++------ .../murphpad/keymaps/jonavin/keymap.c | 89 +++++------- users/jonavin/jonavin.c | 129 ++++++++++-------- users/jonavin/jonavin.h | 12 ++ users/jonavin/readme.md | 3 +- 9 files changed, 213 insertions(+), 190 deletions(-) diff --git a/keyboards/gmmk/pro/ansi/keymaps/jonavin/keymap.c b/keyboards/gmmk/pro/ansi/keymaps/jonavin/keymap.c index 20a786feb7..f37abfac30 100644 --- a/keyboards/gmmk/pro/ansi/keymaps/jonavin/keymap.c +++ b/keyboards/gmmk/pro/ansi/keymaps/jonavin/keymap.c @@ -78,6 +78,43 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { #endif // COLEMAK_LAYER_ENABLE }; +#if defined(ENCODER_ENABLE) && !defined(ENCODER_DEFAULTACTIONS_ENABLE) // Encoder Functionality when not using userspace defaults + void encoder_action_rgbhue(bool clockwise) { + if (clockwise) + rgblight_increase_hue_noeeprom(); + else + rgblight_decrease_hue_noeeprom(); + } + + bool encoder_update_user(uint8_t index, bool clockwise) { + uint8_t mods_state = get_mods(); + if (mods_state & MOD_BIT(KC_LSFT) ) { // If you are holding L shift, encoder changes layers + encoder_action_layerchange(clockwise); + } else if (mods_state & MOD_BIT(KC_RSFT) ) { // If you are holding R shift, Page up/dn + unregister_mods(MOD_BIT(KC_RSFT)); + encoder_action_navpage(clockwise); + register_mods(MOD_BIT(KC_RSFT)); + } else if (mods_state & MOD_BIT(KC_LCTL)) { // if holding Left Ctrl, navigate next/prev word + encoder_action_navword(clockwise); + } else if (mods_state & MOD_BIT(KC_RCTL)) { // if holding Right Ctrl, change rgb hue/colour + encoder_action_rgbhue(clockwise); + } else if (mods_state & MOD_BIT(KC_LALT)) { // if holding Left Alt, change media next/prev track + encoder_action_mediatrack(clockwise); + } else { + switch(get_highest_layer(layer_state)) { + case _FN1: + #ifdef IDLE_TIMEOUT_ENABLE + timeout_update_threshold(clockwise); + #endif + break; + default: + encoder_action_volume(clockwise); // Otherwise it just changes volume + break; + } + } + return true; + } +#endif // ENCODER_ENABLE && !ENCODER_DEFAULTACTIONS_ENABLE #ifdef RGB_MATRIX_ENABLE // Capslock, Scroll lock and Numlock indicator on Left side lights. diff --git a/keyboards/gmmk/pro/ansi/keymaps/jonavin/readme.md b/keyboards/gmmk/pro/ansi/keymaps/jonavin/readme.md index a6482baa56..2aa910e0c7 100644 --- a/keyboards/gmmk/pro/ansi/keymaps/jonavin/readme.md +++ b/keyboards/gmmk/pro/ansi/keymaps/jonavin/readme.md @@ -12,6 +12,7 @@ - holding Left shift, change layers - holding right shift, Navigate page up/down - holding Left Ctrl, navigate prev/next word + - holding Right Ctrl, changes RGB hue/colour - holding Left Alt, change media prev/next track - default is change volume diff --git a/keyboards/gmmk/pro/ansi/keymaps/jonavin/rules.mk b/keyboards/gmmk/pro/ansi/keymaps/jonavin/rules.mk index b06ae1b6ad..81b84eea7f 100644 --- a/keyboards/gmmk/pro/ansi/keymaps/jonavin/rules.mk +++ b/keyboards/gmmk/pro/ansi/keymaps/jonavin/rules.mk @@ -6,6 +6,6 @@ BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite TD_LSFT_CAPSLOCK_ENABLE = yes IDLE_TIMEOUT_ENABLE = yes STARTUP_NUMLOCK_ON = yes -ENCODER_DEFAULTACTIONS_ENABLE = yes +ENCODER_DEFAULTACTIONS_ENABLE = no COLEMAK_LAYER_ENABLE = yes #Enable Colemak layer / set to no to disable diff --git a/keyboards/keebio/quefrency/keymaps/jonavin/keymap.c b/keyboards/keebio/quefrency/keymaps/jonavin/keymap.c index 721148f4dc..415f554e26 100644 --- a/keyboards/keebio/quefrency/keymaps/jonavin/keymap.c +++ b/keyboards/keebio/quefrency/keymaps/jonavin/keymap.c @@ -57,46 +57,31 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { }; #ifdef ENCODER_ENABLE // Encoder Functionality -bool encoder_update_user(uint8_t index, bool clockwise) { - switch (index) - { - case 0: // first encoder (Left Macro set) - if (clockwise) { - tap_code(KC_PGDN); - } else { - tap_code(KC_PGUP); - } + bool encoder_update_user(uint8_t index, bool clockwise) { + uint8_t mods_state = get_mods(); + switch (index) { + case 0: // first encoder (Left Macro set) + encoder_action_navpage(clockwise); + break; - default: // other encoder (Top right) - if ( clockwise ) { - if (keyboard_report->mods & MOD_BIT(KC_LSFT) ) { // If you are holding L shift, Page up - unregister_mods(MOD_BIT(KC_LSFT)); - register_code(KC_PGDN); - register_mods(MOD_BIT(KC_LSFT)); - } else if (keyboard_report->mods & MOD_BIT(KC_LCTL)) { // if holding Left Ctrl, navigate next word - tap_code16(LCTL(KC_RGHT)); - } else if (keyboard_report->mods & MOD_BIT(KC_LALT)) { // if holding Left Alt, change media next track - tap_code(KC_MEDIA_NEXT_TRACK); + default: // other encoder (Top right) + if (mods_state & MOD_BIT(KC_LSFT) ) { // If you are holding Left shift, change layers + encoder_action_layerchange(clockwise); + } else if (mods_state & MOD_BIT(KC_RSFT) ) { // If you are holding Right shift, Page up + unregister_mods(MOD_BIT(KC_RSFT)); + encoder_action_navpage(clockwise); + register_mods(MOD_BIT(KC_RSFT)); + } else if (mods_state & MOD_BIT(KC_LCTL)) { // if holding Left Ctrl, navigate next/prev word + encoder_action_navword(clockwise); + } else if (mods_state & MOD_BIT(KC_LALT)) { // if holding Left Alt, change media next/prev track + encoder_action_mediatrack(clockwise); } else { - tap_code(KC_VOLU); // Otherwise it just changes volume - } - } else { - if (keyboard_report->mods & MOD_BIT(KC_LSFT) ) { - unregister_mods(MOD_BIT(KC_LSFT)); - register_code(KC_PGUP); - register_mods(MOD_BIT(KC_LSFT)); - } else if (keyboard_report->mods & MOD_BIT(KC_LCTL)) { // if holding Left Ctrl, navigate previous word - tap_code16(LCTL(KC_LEFT)); - } else if (keyboard_report->mods & MOD_BIT(KC_LALT)) { // if holding Left Alt, change media previous track - tap_code(KC_MEDIA_PREV_TRACK); - } else { - tap_code(KC_VOLD); + encoder_action_volume(clockwise); // Otherwise it just changes volume } + break; } - break; + return true; } - return true; -} #endif #ifdef RGBLIGHT_ENABLE diff --git a/keyboards/mechwild/mercutio/keymaps/jonavin/keymap.c b/keyboards/mechwild/mercutio/keymaps/jonavin/keymap.c index 74811cbc35..22d26db3c2 100755 --- a/keyboards/mechwild/mercutio/keymaps/jonavin/keymap.c +++ b/keyboards/mechwild/mercutio/keymaps/jonavin/keymap.c @@ -106,63 +106,48 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { #ifdef ENCODER_ENABLE // Encoder Functionality - uint8_t selected_layer = 0; + void encoder_action_selectkey(bool clockwise) { + if ( clockwise ) { + if ( selectedkey_idx < MAX_KEYSELECTION-1) { + selectedkey_idx ++; + } else { + // do nothing + } + } else if ( !clockwise ) { + if ( selectedkey_idx > 0){ + selectedkey_idx --; + } else { + // do nothing + } + } + set_selectedkey(selectedkey_idx); + } bool encoder_update_user(uint8_t index, bool clockwise) { #ifdef OLED_ENABLE oled_clear(); oled_render(); #endif + uint8_t mods_state = get_mods(); switch (index) { case 0: // This is the only encoder right now, keeping for consistency switch(get_highest_layer(layer_state)){ // special handling per layer case _FN1: // on Fn layer select what the encoder does when pressed - if (!keyboard_report->mods) { - if ( clockwise ) { - if ( selectedkey_idx < MAX_KEYSELECTION-1) { - selectedkey_idx ++; - } else { - // do nothing - } - } else if ( !clockwise ) { - if ( selectedkey_idx > 0){ - selectedkey_idx --; - } else { - // do nothing - } - } - set_selectedkey(selectedkey_idx); + if (!mods_state) { + encoder_action_selectkey(clockwise); break; } else { // continue to default } default: // all other layers - if ( clockwise ) { - if (keyboard_report->mods & MOD_BIT(KC_LSFT) ) { // If you are holding L shift, encoder changes layers - if(selected_layer < 3) { - selected_layer ++; - layer_move(selected_layer); - } - } else if (keyboard_report->mods & MOD_BIT(KC_LCTL)) { // if holding Left Ctrl, navigate next word - tap_code16(LCTL(KC_RGHT)); - } else if (keyboard_report->mods & MOD_BIT(KC_LALT)) { // if holding Left Alt, change media next track - tap_code(KC_MEDIA_NEXT_TRACK); - } else { - tap_code(KC_VOLU); // Otherwise it just changes volume - } - } else if ( !clockwise ) { - if (keyboard_report->mods & MOD_BIT(KC_LSFT) ) { - if (selected_layer > 0) { - selected_layer --; - layer_move(selected_layer); - } - } else if (keyboard_report->mods & MOD_BIT(KC_LCTL)) { // if holding Left Ctrl, navigate previous word - tap_code16(LCTL(KC_LEFT)); - } else if (keyboard_report->mods & MOD_BIT(KC_LALT)) { // if holding Left Alt, change media previous track - tap_code(KC_MEDIA_PREV_TRACK); - } else { - tap_code(KC_VOLD); - } + if (mods_state & MOD_BIT(KC_LSFT) ) { // If you are holding L shift, encoder changes layers + encoder_action_layerchange(clockwise); + } else if (mods_state & MOD_BIT(KC_LCTL)) { // if holding Left Ctrl, navigate next/prev word + encoder_action_navword(clockwise); + } else if (mods_state & MOD_BIT(KC_LALT)) { // if holding Left Alt, change media next/prev track + encoder_action_mediatrack(clockwise); + } else { + encoder_action_volume(clockwise); // Otherwise it just changes volume } break; } @@ -205,7 +190,7 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { void oled_task_user(void) { - if ( IS_HOST_LED_OFF(USB_LED_NUM_LOCK) && IS_HOST_LED_OFF(USB_LED_CAPS_LOCK) && selected_layer == 0 && get_highest_layer(layer_state) == 0 ) { + if ( IS_HOST_LED_OFF(USB_LED_NUM_LOCK) && IS_HOST_LED_OFF(USB_LED_CAPS_LOCK) && get_selected_layer() == 0 && get_highest_layer(layer_state) == 0 ) { render_name(); clear_screen = true; } else { @@ -217,7 +202,7 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { render_logo(); oled_set_cursor(8,2); char fn_str[12]; - switch(selected_layer){ + switch(get_selected_layer()){ case 0: oled_write_P(PSTR("BASE"), false); break; @@ -237,7 +222,7 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { } oled_write_P(keymap_config.no_gui ? PSTR(" WL") : PSTR(" "), false); oled_set_cursor(8,3); - if (get_highest_layer(layer_state) == selected_layer) { + if (get_highest_layer(layer_state) == get_selected_layer()) { oled_write_P(PSTR(" "), false); } else { switch (get_highest_layer(layer_state)) { diff --git a/keyboards/mechwild/murphpad/keymaps/jonavin/keymap.c b/keyboards/mechwild/murphpad/keymaps/jonavin/keymap.c index 001abc5027..39e6ac87e4 100644 --- a/keyboards/mechwild/murphpad/keymaps/jonavin/keymap.c +++ b/keyboards/mechwild/murphpad/keymaps/jonavin/keymap.c @@ -144,67 +144,52 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { #ifdef ENCODER_ENABLE // Encoder Functionality - uint8_t selected_layer = 0; + void encoder_action_selectkey(bool clockwise) { + if ( clockwise ) { + if ( selectedkey_idx < MAX_KEYSELECTION-1) { + selectedkey_idx ++; + } else { + // do nothing + } + } else if ( !clockwise ) { + if ( selectedkey_idx > 0){ + selectedkey_idx --; + } else { + // do nothing + } + } + set_selectedkey(selectedkey_idx); + } bool encoder_update_user(uint8_t index, bool clockwise) { #ifdef OLED_ENABLE oled_clear(); oled_render(); #endif + uint8_t mods_state = get_mods(); switch (index) { case 0: // This is the only encoder right now, keeping for consistency - switch(get_highest_layer(layer_state)){ // special handling per layer - case _FN1: // on Fn layer select what the encoder does when pressed - if (!keyboard_report->mods) { - if ( clockwise ) { - if ( selectedkey_idx < MAX_KEYSELECTION-1) { - selectedkey_idx ++; - } else { - // do nothing - } - } else if ( !clockwise ) { - if ( selectedkey_idx > 0){ - selectedkey_idx --; - } else { - // do nothing - } - } - set_selectedkey(selectedkey_idx); - break; - } else { - // continue to default - } - default: // all other layers - if ( clockwise ) { - if (keyboard_report->mods & MOD_BIT(KC_RSFT) ) { // If you are holding Right Shift, encoder changes layers - if(selected_layer < (DYNAMIC_KEYMAP_LAYER_COUNT-1)) { - selected_layer ++; - layer_move(selected_layer); - } - } else if (keyboard_report->mods & MOD_BIT(KC_RCTL)) { // if holding Right Ctrl, navigate next word - tap_code16(LCTL(KC_RGHT)); - } else if (keyboard_report->mods & MOD_BIT(KC_RALT)) { // if holding Right Alt, change media next track - tap_code(KC_MEDIA_NEXT_TRACK); - } else { - tap_code(KC_VOLU); // Otherwise it just changes volume - } - } else if ( !clockwise ) { - if (keyboard_report->mods & MOD_BIT(KC_RSFT) ) { - if (selected_layer > 0) { - selected_layer --; - layer_move(selected_layer); - } - } else if (keyboard_report->mods & MOD_BIT(KC_RCTL)) { // if holding Right Ctrl, navigate previous word - tap_code16(LCTL(KC_LEFT)); - } else if (keyboard_report->mods & MOD_BIT(KC_RALT)) { // if holding Right Alt, change media previous track - tap_code(KC_MEDIA_PREV_TRACK); - } else { - tap_code(KC_VOLD); - } - } + switch(get_highest_layer(layer_state)){ // special handling per layer + case _FN1: // on Fn layer select what the encoder does when pressed + if (!mods_state) { + encoder_action_selectkey(clockwise); break; + } else { + // continue to default + } + default: // all other layers + if (mods_state & MOD_BIT(KC_RSFT) ) { // If you are holding R shift, encoder changes layers + encoder_action_layerchange(clockwise); + } else if (mods_state & MOD_BIT(KC_RCTL)) { // if holding Right Ctrl, navigate next/prev word + encoder_action_navword(clockwise); + } else if (mods_state & MOD_BIT(KC_RALT)) { // if holding Right Alt, change media next/prev track + encoder_action_mediatrack(clockwise); + } else { + encoder_action_volume(clockwise); // Otherwise it just changes volume } break; + } + break; } return true; } @@ -232,7 +217,7 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { render_logo(); oled_set_cursor(8,2); - switch(selected_layer){ + switch(get_selected_layer()){ case _BASE: oled_write_P(PSTR("BASE"), false); break; @@ -257,7 +242,7 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { } oled_write_P(keymap_config.no_gui ? PSTR(" WL") : PSTR(" "), false); oled_set_cursor(8,3); - if (get_highest_layer(layer_state) == selected_layer) { + if (get_highest_layer(layer_state) == get_selected_layer()) { oled_write_P(PSTR(" "), false); } else { switch (get_highest_layer(layer_state)) { diff --git a/users/jonavin/jonavin.c b/users/jonavin/jonavin.c index bd6c55e9fe..6ecadc7b47 100644 --- a/users/jonavin/jonavin.c +++ b/users/jonavin/jonavin.c @@ -104,7 +104,7 @@ along with this program. If not, see . #endif // IDLE_TIMEOUT_ENABLE -#if defined(ENCODER_ENABLE) && defined(ENCODER_DEFAULTACTIONS_ENABLE) // Encoder Functionality +#ifdef ENCODER_ENABLE #ifndef DYNAMIC_KEYMAP_LAYER_COUNT #define DYNAMIC_KEYMAP_LAYER_COUNT 4 //default in case this is not already defined elsewhere #endif @@ -112,67 +112,86 @@ along with this program. If not, see . #define ENCODER_DEFAULTACTIONS_INDEX 0 // can select encoder index if there are multiple encoders #endif -uint8_t selected_layer = 0; + void encoder_action_volume(bool clockwise) { + if (clockwise) + tap_code(KC_VOLU); + else + tap_code(KC_VOLD); + } -__attribute__((weak)) bool encoder_update_keymap(uint8_t index, bool clockwise) { return true; } + void encoder_action_mediatrack(bool clockwise) { + if (clockwise) + tap_code(KC_MEDIA_NEXT_TRACK); + else + tap_code(KC_MEDIA_PREV_TRACK); + } -bool encoder_update_user(uint8_t index, bool clockwise) { - if (!encoder_update_keymap(index, clockwise)) { return false; } - if (index != ENCODER_DEFAULTACTIONS_INDEX) {return true;} // exit if the index doesn't match - if ( clockwise ) { - if (keyboard_report->mods & MOD_BIT(KC_LSFT) ) { // If you are holding L shift, encoder changes layers - if(selected_layer < (DYNAMIC_KEYMAP_LAYER_COUNT - 1)) { - selected_layer ++; - layer_move(selected_layer); - } - } else if (keyboard_report->mods & MOD_BIT(KC_RSFT) ) { // If you are holding R shift, Page up - unregister_mods(MOD_BIT(KC_RSFT)); - register_code(KC_PGDN); - register_mods(MOD_BIT(KC_RSFT)); - } else if (keyboard_report->mods & MOD_BIT(KC_LCTL)) { // if holding Left Ctrl, navigate next word - tap_code16(LCTL(KC_RGHT)); - } else if (keyboard_report->mods & MOD_BIT(KC_LALT)) { // if holding Left Alt, change media next track - tap_code(KC_MEDIA_NEXT_TRACK); - } else { - switch (selected_layer) { - case _FN1: - #ifdef IDLE_TIMEOUT_ENABLE - timeout_update_threshold(true); - #endif - break; - default: - tap_code(KC_VOLU); // Otherwise it just changes volume - break; - } + void encoder_action_navword(bool clockwise) { + if (clockwise) + tap_code16(LCTL(KC_RGHT)); + else + tap_code16(LCTL(KC_LEFT)); + } + + void encoder_action_navpage(bool clockwise) { + if (clockwise) + tap_code16(KC_PGUP); + else + tap_code16(KC_PGDN); + } + + // LAYER HANDLING + uint8_t selected_layer = 0; + + uint8_t get_selected_layer(void) { + return selected_layer; + } + + void encoder_action_layerchange(bool clockwise) { + if (clockwise) { + if(selected_layer < (DYNAMIC_KEYMAP_LAYER_COUNT - 1)) { + selected_layer ++; + layer_move(selected_layer); } } else { - if (keyboard_report->mods & MOD_BIT(KC_LSFT) ) { - if (selected_layer > 0) { - selected_layer --; - layer_move(selected_layer); - } - } else if (keyboard_report->mods & MOD_BIT(KC_RSFT) ) { - unregister_mods(MOD_BIT(KC_RSFT)); - register_code(KC_PGUP); - register_mods(MOD_BIT(KC_RSFT)); - } else if (keyboard_report->mods & MOD_BIT(KC_LCTL)) { // if holding Left Ctrl, navigate previous word - tap_code16(LCTL(KC_LEFT)); - } else if (keyboard_report->mods & MOD_BIT(KC_LALT)) { // if holding Left Alt, change media previous track - tap_code(KC_MEDIA_PREV_TRACK); - } else { - switch (selected_layer) { - case _FN1: - #ifdef IDLE_TIMEOUT_ENABLE - timeout_update_threshold(false); - #endif - break; - default: - tap_code(KC_VOLD); - break; - } + if (selected_layer > 0) { + selected_layer --; + layer_move(selected_layer); } } + } +#endif // ENCODER_ENABLE + +#if defined(ENCODER_ENABLE) && defined(ENCODER_DEFAULTACTIONS_ENABLE) // Encoder Functionality + __attribute__((weak)) bool encoder_update_keymap(uint8_t index, bool clockwise) { return true; } + + bool encoder_update_user(uint8_t index, bool clockwise) { + if (!encoder_update_keymap(index, clockwise)) { return false; } + if (index != ENCODER_DEFAULTACTIONS_INDEX) {return true;} // exit if the index doesn't match + uint8_t mods_state = get_mods(); + if (mods_state & MOD_BIT(KC_LSFT) ) { // If you are holding L shift, encoder changes layers + encoder_action_layerchange(clockwise); + } else if (mods_state & MOD_BIT(KC_RSFT) ) { // If you are holding R shift, Page up/dn + unregister_mods(MOD_BIT(KC_RSFT)); + encoder_action_navpage(clockwise); + register_mods(MOD_BIT(KC_RSFT)); + } else if (mods_state & MOD_BIT(KC_LCTL)) { // if holding Left Ctrl, navigate next/prev word + encoder_action_navword(clockwise); + } else if (mods_state & MOD_BIT(KC_LALT)) { // if holding Left Alt, change media next/prev track + encoder_action_mediatrack(clockwise); + } else { + switch(get_highest_layer(layer_state)) { + case _FN1: + #ifdef IDLE_TIMEOUT_ENABLE + timeout_update_threshold(clockwise); + #endif + break; + default: + encoder_action_volume(clockwise); // Otherwise it just changes volume + break; + } + } return true; } #endif // ENCODER_ENABLE diff --git a/users/jonavin/jonavin.h b/users/jonavin/jonavin.h index 5f467bc845..316483940a 100644 --- a/users/jonavin/jonavin.h +++ b/users/jonavin/jonavin.h @@ -58,6 +58,18 @@ enum custom_user_keycodes { #endif // TD_LSFT_CAPSLOCK_ENABLE +// ENCODER ACTIONS +#ifdef ENCODER_ENABLE + void encoder_action_volume(bool clockwise); + void encoder_action_mediatrack(bool clockwise); + void encoder_action_navword(bool clockwise); + void encoder_action_navpage(bool clockwise); + + uint8_t get_selected_layer(void); + void encoder_action_layerchange(bool clockwise); +#endif // ENCODER_ENABLE + + #ifdef RGB_MATRIX_ENABLE //RGB custom colours #define RGB_GODSPEED 0x00, 0xE4, 0xFF // colour for matching keycaps diff --git a/users/jonavin/readme.md b/users/jonavin/readme.md index 97fff6520c..c029796b4e 100644 --- a/users/jonavin/readme.md +++ b/users/jonavin/readme.md @@ -65,11 +65,10 @@ KEYMAP LEVEL ADDITIONAL PROCESSING FUNCTIONS void keyboard_post_init_keymap(void) LIST OF COMPATIBLE KEYMAPS - - gmmk/pro - gmmk/pro/ansi - keebio/quefrency/rev3 - mechwild/mercutio - - mechwild/murphpad (*) + - mechwild/murphpad - mechwild/OBE (*) - nopunin10did/kastenwagen (*) From 873a1999bb962834d88713796741c22339fb670f Mon Sep 17 00:00:00 2001 From: Ryan Date: Wed, 29 Sep 2021 06:08:46 +1000 Subject: [PATCH 148/595] Move "firmware size check skipped" note to message.mk (#14632) --- message.mk | 1 + tmk_core/rules.mk | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/message.mk b/message.mk index 419e3f5f31..cb4ef43719 100644 --- a/message.mk +++ b/message.mk @@ -88,6 +88,7 @@ endef MSG_AVAILABLE_KEYMAPS = $(eval $(call GENERATE_MSG_AVAILABLE_KEYMAPS))$(MSG_AVAILABLE_KEYMAPS_ACTUAL) MSG_CHECK_FILESIZE = Checking file size of $(TARGET).$(FIRMWARE_FORMAT) +MSG_CHECK_FILESIZE_SKIPPED = (Firmware size check does not yet support $(MCU_ORIG); skipping) MSG_FILE_TOO_BIG = $(ERROR_COLOR)The firmware is too large!$(NO_COLOR) $(CURRENT_SIZE)/$(MAX_SIZE) ($(OVER_SIZE) bytes over)\n MSG_FILE_TOO_SMALL = The firmware is too small! $(CURRENT_SIZE)/$(MAX_SIZE)\n MSG_FILE_JUST_RIGHT = The firmware size is fine - $(CURRENT_SIZE)/$(MAX_SIZE) ($(PERCENT_SIZE)%%, $(FREE_SIZE) bytes free)\n diff --git a/tmk_core/rules.mk b/tmk_core/rules.mk index 5a7f299102..fd59fa032a 100644 --- a/tmk_core/rules.mk +++ b/tmk_core/rules.mk @@ -484,7 +484,7 @@ check-size: fi else check-size: - $(SILENT) || echo "(Firmware size check does not yet support $(MCU) microprocessors; skipping.)" + $(SILENT) || echo "$(MSG_CHECK_FILESIZE_SKIPPED)" endif check-md5: From 732535c1bb381bbe93e9efc1cb1260bda67644a6 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Tue, 28 Sep 2021 21:49:35 +0000 Subject: [PATCH 149/595] Mechlovin Delphine: add LAYOUT_numpad_6x4 (#14635) * add LAYOUT_numpad_6x4 * tidy-up info.json data * use GitHub account name for maintainer field * remove meta key * add matrix diagram to delphine.h * update Community Layout support --- keyboards/mechlovin/delphine/delphine.h | 38 +++++++++++++++++++++++++ keyboards/mechlovin/delphine/info.json | 33 +++++++++++++++++++-- keyboards/mechlovin/delphine/rules.mk | 5 ++-- 3 files changed, 72 insertions(+), 4 deletions(-) diff --git a/keyboards/mechlovin/delphine/delphine.h b/keyboards/mechlovin/delphine/delphine.h index 1112fc27ff..da0254eeb4 100644 --- a/keyboards/mechlovin/delphine/delphine.h +++ b/keyboards/mechlovin/delphine/delphine.h @@ -18,6 +18,28 @@ #include "quantum.h" +#define XXX KC_NO + +/* + * ┌───┬───┬───┬───┐ + * │00 │01 │02 │03 │ + * └───┴───┴───┴───┘ + * ┌───┬───┬───┬───┐ + * │10 │11 │12 │13 │ + * ├───┼───┼───┼───┤ ┌───┐ + * │20 │21 │22 │23 │ │ │ + * ├───┼───┼───┼───┤ │23 │ 2u Plus + * │30 │31 │32 │33 │ │ │ + * ├───┼───┼───┼───┤ ├───┤ + * │40 │41 │42 │43 │ │ │ + * ├───┼───┼───┼───┤ │43 │ 2u Enter + * │50 │51 │52 │53 │ │ │ + * └───┴───┴───┴───┘ └───┘ + * ┌───────┐ + * │51 │ 2u 0/Ins + * └───────┘ + */ + #define LAYOUT_ortho_6x4( \ K00, K01, K02, K03, \ K10, K11, K12, K13, \ @@ -33,3 +55,19 @@ { K40, K41, K42, K43 }, \ { K50, K51, K52, K53 }, \ } + +#define LAYOUT_numpad_6x4( \ + K00, K01, K02, K03, \ + K10, K11, K12, K13, \ + K20, K21, K22, \ + K30, K31, K32, K23, \ + K40, K41, K42, \ + K51, K52, K43 \ +) { \ + { K00, K01, K02, K03 }, \ + { K10, K11, K12, K13 }, \ + { K20, K21, K22, K23 }, \ + { K30, K31, K32, XXX }, \ + { K40, K41, K42, K43 }, \ + { XXX, K51, K52, XXX }, \ +} diff --git a/keyboards/mechlovin/delphine/info.json b/keyboards/mechlovin/delphine/info.json index 36b6ac38ab..38ae0a3beb 100644 --- a/keyboards/mechlovin/delphine/info.json +++ b/keyboards/mechlovin/delphine/info.json @@ -1,7 +1,7 @@ { "keyboard_name": "Delphine", "url": "", - "maintainer": "Team Mechlovin'", + "maintainer": "mechlovin", "layouts": { "LAYOUT_ortho_6x4": { "layout": [ @@ -30,7 +30,36 @@ {"label":"K52 (D3,D6)", "x":2, "y":5.25}, {"label":"K53 (D3,D2)", "x":3, "y":5.25} ] + }, + "LAYOUT_numpad_6x4": { + "layout": [ + {"label":"K00 (F0,F7)", "x":0, "y":0}, + {"label":"K01 (F0,D7)", "x":1, "y":0}, + {"label":"K02 (F0,D6)", "x":2, "y":0}, + {"label":"K03 (F0,D2)", "x":3, "y":0}, + + {"label":"K10 (F1,F7)", "x":0, "y":1.25}, + {"label":"K11 (F1,D7)", "x":1, "y":1.25}, + {"label":"K12 (F1,D6)", "x":2, "y":1.25}, + {"label":"K13 (F1,D2)", "x":3, "y":1.25}, + + {"label":"K20 (F4,F7)", "x":0, "y":2.25}, + {"label":"K21 (F4,D7)", "x":1, "y":2.25}, + {"label":"K22 (F4,D6)", "x":2, "y":2.25}, + + {"label":"K30 (F5,F7)", "x":0, "y":3.25}, + {"label":"K31 (F5,D7)", "x":1, "y":3.25}, + {"label":"K32 (F5,D6)", "x":2, "y":3.25}, + {"label":"K23 (F4,D2)", "x":3, "y":2.25, "h":2}, + + {"label":"K40 (F6,F7)", "x":0, "y":4.25}, + {"label":"K41 (F6,D7)", "x":1, "y":4.25}, + {"label":"K42 (F6,D6)", "x":2, "y":4.25}, + + {"label":"K51 (D3,D7)", "x":0, "y":5.25, "w":2}, + {"label":"K52 (D3,D6)", "x":2, "y":5.25}, + {"label":"K43 (F6,D2)", "x":3, "y":4.25, "h":2} + ] } } - ,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/" } diff --git a/keyboards/mechlovin/delphine/rules.mk b/keyboards/mechlovin/delphine/rules.mk index b7cb9d955d..be3533e85b 100644 --- a/keyboards/mechlovin/delphine/rules.mk +++ b/keyboards/mechlovin/delphine/rules.mk @@ -20,5 +20,6 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -LAYOUTS = ortho_6x4 -DEFAULT_FOLDER = mechlovin/delphine/mono_led \ No newline at end of file +LAYOUTS = numpad_6x4 ortho_6x4 + +DEFAULT_FOLDER = mechlovin/delphine/mono_led From 02b760c6b0c72b8201a8a182654f0f277461a9d4 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Tue, 28 Sep 2021 23:02:48 +0000 Subject: [PATCH 150/595] convert checkerboards/quark_squared:via rules.mk to Unix line endings (#14638) --- keyboards/checkerboards/quark_squared/keymaps/via/rules.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/keyboards/checkerboards/quark_squared/keymaps/via/rules.mk b/keyboards/checkerboards/quark_squared/keymaps/via/rules.mk index 69de2e4c5a..1e5b99807c 100644 --- a/keyboards/checkerboards/quark_squared/keymaps/via/rules.mk +++ b/keyboards/checkerboards/quark_squared/keymaps/via/rules.mk @@ -1 +1 @@ -VIA_ENABLE = yes +VIA_ENABLE = yes From 55f699c09edb12b4fc0d1f17621753e185517837 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Wed, 29 Sep 2021 00:18:53 +0000 Subject: [PATCH 151/595] Fix for mechlovin/adelais/standard_led/arm/rev4 (#14639) * Fix for #14622 Fix for a bad merge conflict resolution. --- keyboards/mechlovin/adelais/standard_led/arm/rev4/rev4.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/keyboards/mechlovin/adelais/standard_led/arm/rev4/rev4.h b/keyboards/mechlovin/adelais/standard_led/arm/rev4/rev4.h index a337d653ed..45d48fac46 100644 --- a/keyboards/mechlovin/adelais/standard_led/arm/rev4/rev4.h +++ b/keyboards/mechlovin/adelais/standard_led/arm/rev4/rev4.h @@ -46,7 +46,7 @@ { K40, KC_NO, K42, KC_NO, K44, KC_NO, K46, KC_NO, K48, KC_NO, K4A, KC_NO, KC_NO, K4D, K4E }, \ } -#define LAYOUT_alice_split_bs( \ +#define LAYOUT_alice_split_bs_full_rshift( \ K1E, K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ K2E, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ K3E, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ @@ -60,7 +60,7 @@ { K40, KC_NO, K42, KC_NO, K44, KC_NO, K46, KC_NO, K48, KC_NO, K4A, KC_NO, KC_NO, KC_NO, K4E }, \ } -#define LAYOUT_alice( \ +#define LAYOUT_alice_full_rshift( \ K1E, K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ K2E, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ K3E, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ From 046e3ce5c9291ca36d55e7407f765dee3a89462e Mon Sep 17 00:00:00 2001 From: Grayson Carr <734415+gtg465x@users.noreply.github.com> Date: Tue, 28 Sep 2021 22:45:29 -0400 Subject: [PATCH 152/595] [Keymap] Keychron Q1 user keymap (#14636) --- .../q1/rev_0100/keymaps/gtg465x/README.md | 4 + .../q1/rev_0100/keymaps/gtg465x/config.h | 21 +++++ .../q1/rev_0100/keymaps/gtg465x/keymap.c | 92 +++++++++++++++++++ .../q1/rev_0100/keymaps/gtg465x/rules.mk | 2 + 4 files changed, 119 insertions(+) create mode 100644 keyboards/keychron/q1/rev_0100/keymaps/gtg465x/README.md create mode 100644 keyboards/keychron/q1/rev_0100/keymaps/gtg465x/config.h create mode 100644 keyboards/keychron/q1/rev_0100/keymaps/gtg465x/keymap.c create mode 100644 keyboards/keychron/q1/rev_0100/keymaps/gtg465x/rules.mk diff --git a/keyboards/keychron/q1/rev_0100/keymaps/gtg465x/README.md b/keyboards/keychron/q1/rev_0100/keymaps/gtg465x/README.md new file mode 100644 index 0000000000..c10416e690 --- /dev/null +++ b/keyboards/keychron/q1/rev_0100/keymaps/gtg465x/README.md @@ -0,0 +1,4 @@ +# gtg465x's Keychron Q1 keymap + +- On macOS, F3 opens Mission Control and F4 opens Launchpad without needing to configure shortcuts in System Preferences +- RGB lighting turns off when the computer sleeps diff --git a/keyboards/keychron/q1/rev_0100/keymaps/gtg465x/config.h b/keyboards/keychron/q1/rev_0100/keymaps/gtg465x/config.h new file mode 100644 index 0000000000..3a20f0b008 --- /dev/null +++ b/keyboards/keychron/q1/rev_0100/keymaps/gtg465x/config.h @@ -0,0 +1,21 @@ +/* Copyright 2021 @ Grayson Carr + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + + +/* RGB Matrix Configuration */ +#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended diff --git a/keyboards/keychron/q1/rev_0100/keymaps/gtg465x/keymap.c b/keyboards/keychron/q1/rev_0100/keymaps/gtg465x/keymap.c new file mode 100644 index 0000000000..79ef0bf86b --- /dev/null +++ b/keyboards/keychron/q1/rev_0100/keymaps/gtg465x/keymap.c @@ -0,0 +1,92 @@ +/* Copyright 2021 @ Grayson Carr + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + + +enum layers{ + MAC_BASE, + MAC_FN, + WIN_BASE, + WIN_FN +}; + +enum custom_keycodes { + KC_MISSION_CONTROL = SAFE_RANGE, + KC_LAUNCHPAD +}; + +#define KC_MCTL KC_MISSION_CONTROL +#define KC_LPAD KC_LAUNCHPAD +#define KC_TASK LGUI(KC_TAB) +#define KC_FLXP LGUI(KC_E) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[MAC_BASE] = LAYOUT_ansi_82( + KC_ESC, KC_BRID, KC_BRIU, KC_MCTL, KC_LPAD, RGB_VAD, RGB_VAI, KC_MPRV, KC_MPLY, KC_MNXT, KC_MUTE, KC_VOLD, KC_VOLU, KC_DEL, KC_INS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_HOME, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, MO(MAC_FN),KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + +[MAC_FN] = LAYOUT_ansi_82( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + RGB_TOG, RGB_MOD, RGB_VAI, RGB_HUI, RGB_SAI, RGB_SPI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, RGB_RMOD, RGB_VAD, RGB_HUD, RGB_SAD, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + +[WIN_BASE] = LAYOUT_ansi_82( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_INS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_HOME, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(WIN_FN),KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + +[WIN_FN] = LAYOUT_ansi_82( + KC_TRNS, KC_BRID, KC_BRIU, KC_TASK, KC_FLXP, RGB_VAD, RGB_VAI, KC_MPRV, KC_MPLY, KC_MNXT, KC_MUTE, KC_VOLD, KC_VOLU, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + RGB_TOG, RGB_MOD, RGB_VAI, RGB_HUI, RGB_SAI, RGB_SPI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, RGB_RMOD, RGB_VAD, RGB_HUD, RGB_SAD, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) + +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case KC_MISSION_CONTROL: + if (record->event.pressed) { + host_consumer_send(0x29F); + } else { + host_consumer_send(0); + } + return false; // Skip all further processing of this key + case KC_LAUNCHPAD: + if (record->event.pressed) { + host_consumer_send(0x2A0); + } else { + host_consumer_send(0); + } + return false; // Skip all further processing of this key + default: + return true; // Process all other keycodes normally + } +} diff --git a/keyboards/keychron/q1/rev_0100/keymaps/gtg465x/rules.mk b/keyboards/keychron/q1/rev_0100/keymaps/gtg465x/rules.mk new file mode 100644 index 0000000000..96d2d189b2 --- /dev/null +++ b/keyboards/keychron/q1/rev_0100/keymaps/gtg465x/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +MOUSEKEY_ENABLE = no From 6779d5b990bf94cba28a74246c2378e5bb5047b4 Mon Sep 17 00:00:00 2001 From: nachie Date: Tue, 28 Sep 2021 21:35:14 -0700 Subject: [PATCH 153/595] [Keyboard] Add support for PaladinPad, Arya pcb and move keyboards by KapCave into their own directory (#14194) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan Co-authored-by: Nachiket Kulkarni --- keyboards/gskt00/config.h | 31 ------ keyboards/gskt00/gskt00.c | 2 - keyboards/gskt00/readme.md | 17 --- keyboards/kapcave/arya/arya.c | 27 +++++ keyboards/kapcave/arya/arya.h | 43 ++++++++ keyboards/kapcave/arya/chconf.h | 25 +++++ keyboards/kapcave/arya/config.h | 68 ++++++++++++ keyboards/kapcave/arya/halconf.h | 23 ++++ keyboards/kapcave/arya/info.json | 77 +++++++++++++ .../kapcave/arya/keymaps/default/keymap.c | 34 ++++++ .../kapcave/arya/keymaps/default/readme.md | 1 + keyboards/kapcave/arya/keymaps/via/keymap.c | 56 ++++++++++ keyboards/kapcave/arya/keymaps/via/readme.md | 1 + keyboards/kapcave/arya/keymaps/via/rules.mk | 1 + keyboards/kapcave/arya/mcuconf.h | 33 ++++++ keyboards/kapcave/arya/readme.md | 23 ++++ keyboards/kapcave/arya/rules.mk | 25 +++++ keyboards/kapcave/gskt00/config.h | 52 +++++++++ keyboards/kapcave/gskt00/gskt00.c | 18 +++ keyboards/{ => kapcave}/gskt00/gskt00.h | 17 +++ keyboards/{ => kapcave}/gskt00/info.json | 4 +- .../gskt00/keymaps/default-poly/config.h | 39 +++++++ .../gskt00/keymaps/default-poly/keymap.c | 70 ++++++++++++ .../gskt00/keymaps/default-poly/readme.md | 1 + .../gskt00/keymaps/default-poly/rules.mk | 2 + .../gskt00/keymaps/default/keymap.c | 33 +++--- .../kapcave/gskt00/keymaps/default/readme.md | 1 + .../gskt00/keymaps/nachie/keymap.c | 0 keyboards/kapcave/gskt00/keymaps/via/keymap.c | 57 ++++++++++ .../kapcave/gskt00/keymaps/via/readme.md | 1 + keyboards/kapcave/gskt00/keymaps/via/rules.mk | 1 + keyboards/kapcave/gskt00/readme.md | 23 ++++ keyboards/{ => kapcave}/gskt00/rules.mk | 2 +- keyboards/{ => kapcave}/paladin64/config.h | 26 ++++- keyboards/{ => kapcave}/paladin64/info.json | 6 +- .../paladin64/keymaps/default/keymap.c | 16 +++ .../paladin64/keymaps/default/readme.md | 1 + .../kapcave/paladin64/keymaps/via/keymap.c | 59 ++++++++++ .../kapcave/paladin64/keymaps/via/readme.md | 1 + .../kapcave/paladin64/keymaps/via/rules.mk | 1 + keyboards/kapcave/paladin64/paladin64.c | 18 +++ keyboards/{ => kapcave}/paladin64/paladin64.h | 16 +++ keyboards/kapcave/paladin64/readme.md | 24 ++++ keyboards/kapcave/paladin64/rules.mk | 23 ++++ keyboards/kapcave/paladinpad/config.h | 46 ++++++++ keyboards/kapcave/paladinpad/info.json | 82 ++++++++++++++ .../kapcave/paladinpad/keymaps/aek/keymap.c | 38 +++++++ .../kapcave/paladinpad/keymaps/aek/readme.md | 1 + .../paladinpad/keymaps/default/keymap.c | 38 +++++++ .../paladinpad/keymaps/default/readme.md | 1 + .../kapcave/paladinpad/keymaps/ortho/keymap.c | 53 +++++++++ .../paladinpad/keymaps/ortho/readme.md | 1 + .../kapcave/paladinpad/keymaps/via/keymap.c | 59 ++++++++++ .../kapcave/paladinpad/keymaps/via/rules.mk | 3 + keyboards/kapcave/paladinpad/paladinpad.c | 17 +++ keyboards/kapcave/paladinpad/paladinpad.h | 103 ++++++++++++++++++ keyboards/kapcave/paladinpad/readme.md | 23 ++++ keyboards/kapcave/paladinpad/rev1/config.h | 44 ++++++++ keyboards/kapcave/paladinpad/rev1/rules.mk | 0 keyboards/kapcave/paladinpad/rev2/config.h | 47 ++++++++ keyboards/kapcave/paladinpad/rev2/rules.mk | 0 keyboards/kapcave/paladinpad/rules.mk | 24 ++++ keyboards/paladin64/paladin64.c | 2 - keyboards/paladin64/readme.md | 19 ---- keyboards/paladin64/rules.mk | 24 ---- 65 files changed, 1504 insertions(+), 120 deletions(-) delete mode 100755 keyboards/gskt00/config.h delete mode 100755 keyboards/gskt00/gskt00.c delete mode 100644 keyboards/gskt00/readme.md create mode 100644 keyboards/kapcave/arya/arya.c create mode 100644 keyboards/kapcave/arya/arya.h create mode 100644 keyboards/kapcave/arya/chconf.h create mode 100644 keyboards/kapcave/arya/config.h create mode 100644 keyboards/kapcave/arya/halconf.h create mode 100644 keyboards/kapcave/arya/info.json create mode 100644 keyboards/kapcave/arya/keymaps/default/keymap.c create mode 100644 keyboards/kapcave/arya/keymaps/default/readme.md create mode 100644 keyboards/kapcave/arya/keymaps/via/keymap.c create mode 100644 keyboards/kapcave/arya/keymaps/via/readme.md create mode 100644 keyboards/kapcave/arya/keymaps/via/rules.mk create mode 100644 keyboards/kapcave/arya/mcuconf.h create mode 100644 keyboards/kapcave/arya/readme.md create mode 100644 keyboards/kapcave/arya/rules.mk create mode 100755 keyboards/kapcave/gskt00/config.h create mode 100755 keyboards/kapcave/gskt00/gskt00.c rename keyboards/{ => kapcave}/gskt00/gskt00.h (79%) rename keyboards/{ => kapcave}/gskt00/info.json (98%) create mode 100644 keyboards/kapcave/gskt00/keymaps/default-poly/config.h create mode 100755 keyboards/kapcave/gskt00/keymaps/default-poly/keymap.c create mode 100644 keyboards/kapcave/gskt00/keymaps/default-poly/readme.md create mode 100644 keyboards/kapcave/gskt00/keymaps/default-poly/rules.mk rename keyboards/{ => kapcave}/gskt00/keymaps/default/keymap.c (54%) create mode 100644 keyboards/kapcave/gskt00/keymaps/default/readme.md rename keyboards/{ => kapcave}/gskt00/keymaps/nachie/keymap.c (100%) create mode 100755 keyboards/kapcave/gskt00/keymaps/via/keymap.c create mode 100644 keyboards/kapcave/gskt00/keymaps/via/readme.md create mode 100644 keyboards/kapcave/gskt00/keymaps/via/rules.mk create mode 100644 keyboards/kapcave/gskt00/readme.md rename keyboards/{ => kapcave}/gskt00/rules.mk (92%) rename keyboards/{ => kapcave}/paladin64/config.h (79%) rename keyboards/{ => kapcave}/paladin64/info.json (98%) rename keyboards/{ => kapcave}/paladin64/keymaps/default/keymap.c (81%) create mode 100644 keyboards/kapcave/paladin64/keymaps/default/readme.md create mode 100644 keyboards/kapcave/paladin64/keymaps/via/keymap.c create mode 100644 keyboards/kapcave/paladin64/keymaps/via/readme.md create mode 100644 keyboards/kapcave/paladin64/keymaps/via/rules.mk create mode 100755 keyboards/kapcave/paladin64/paladin64.c rename keyboards/{ => kapcave}/paladin64/paladin64.h (86%) create mode 100644 keyboards/kapcave/paladin64/readme.md create mode 100755 keyboards/kapcave/paladin64/rules.mk create mode 100644 keyboards/kapcave/paladinpad/config.h create mode 100644 keyboards/kapcave/paladinpad/info.json create mode 100644 keyboards/kapcave/paladinpad/keymaps/aek/keymap.c create mode 100644 keyboards/kapcave/paladinpad/keymaps/aek/readme.md create mode 100644 keyboards/kapcave/paladinpad/keymaps/default/keymap.c create mode 100644 keyboards/kapcave/paladinpad/keymaps/default/readme.md create mode 100644 keyboards/kapcave/paladinpad/keymaps/ortho/keymap.c create mode 100644 keyboards/kapcave/paladinpad/keymaps/ortho/readme.md create mode 100644 keyboards/kapcave/paladinpad/keymaps/via/keymap.c create mode 100644 keyboards/kapcave/paladinpad/keymaps/via/rules.mk create mode 100644 keyboards/kapcave/paladinpad/paladinpad.c create mode 100644 keyboards/kapcave/paladinpad/paladinpad.h create mode 100644 keyboards/kapcave/paladinpad/readme.md create mode 100644 keyboards/kapcave/paladinpad/rev1/config.h create mode 100644 keyboards/kapcave/paladinpad/rev1/rules.mk create mode 100644 keyboards/kapcave/paladinpad/rev2/config.h create mode 100644 keyboards/kapcave/paladinpad/rev2/rules.mk create mode 100644 keyboards/kapcave/paladinpad/rules.mk delete mode 100755 keyboards/paladin64/paladin64.c delete mode 100644 keyboards/paladin64/readme.md delete mode 100755 keyboards/paladin64/rules.mk diff --git a/keyboards/gskt00/config.h b/keyboards/gskt00/config.h deleted file mode 100755 index 8ab0583cc8..0000000000 --- a/keyboards/gskt00/config.h +++ /dev/null @@ -1,31 +0,0 @@ -#pragma once - -#include "config_common.h" - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6061 -#define DEVICE_VER 0x0001 -#define MANUFACTURER inachie -#define PRODUCT GSKT00 - -/* key matrix size */ -#define MATRIX_ROWS 8 -#define MATRIX_COLS 8 - -/* key matrix pins */ -#define MATRIX_ROW_PINS { F1, D1, D2, D4, D6, F7, B0, F4 } -#define MATRIX_COL_PINS { F6, D7, F5, C7, B4, C6, B6, B5 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE - -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE diff --git a/keyboards/gskt00/gskt00.c b/keyboards/gskt00/gskt00.c deleted file mode 100755 index 89a0040ff3..0000000000 --- a/keyboards/gskt00/gskt00.c +++ /dev/null @@ -1,2 +0,0 @@ -#include "gskt00.h" - diff --git a/keyboards/gskt00/readme.md b/keyboards/gskt00/readme.md deleted file mode 100644 index ad03ac819f..0000000000 --- a/keyboards/gskt00/readme.md +++ /dev/null @@ -1,17 +0,0 @@ -# GSKT-00 PCB - -Firmware for the GSKT-00 PCB - -Keyboard Maintainer: [/u/iNachie](https://github.com/nachie) -Hardware Supported: GSKT-00 PCB -Hardware Availability: [/u/iNachie](https://www.reddit.com/user/inachie/) - -Make example for this keyboard (after setting up your build environment): - - make gskt00:default - -Or to make and flash: - - make gskt00:default:dfu - -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/kapcave/arya/arya.c b/keyboards/kapcave/arya/arya.c new file mode 100644 index 0000000000..af5d19be4f --- /dev/null +++ b/keyboards/kapcave/arya/arya.c @@ -0,0 +1,27 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include "arya.h" + +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + return true; +} diff --git a/keyboards/kapcave/arya/arya.h b/keyboards/kapcave/arya/arya.h new file mode 100644 index 0000000000..ea1d1916c3 --- /dev/null +++ b/keyboards/kapcave/arya/arya.h @@ -0,0 +1,43 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#pragma once + +#include "quantum.h" + +#define LAYOUT_alice_split_bs( \ + K81, K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17, K26, K27, \ + K80, K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \ + K82, K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \ + K31, K41, K42, K51, K61, K62, K71, K72, K01, K02, K11, K12, K21, K22, \ + K30, K40, K50, K60, K00, K10, K20 \ +) \ +{ \ + { K00 , K01 , K02 , K03 , K04 , K05 , K06 , K07 }, \ + { K10 , K11 , K12 , K13 , K14 , K15 , K16 , K17 }, \ + { K20 , K21 , K22 , K23 , K24 , K25 , K26 , K27 }, \ + { K30 , K31 , K32 , K33 , K34 , K35 , K36 , K37 }, \ + { K40 , K41 , K42 , K43 , K44 , K45 , K46 , K47 }, \ + { K50 , K51 , K52 , K53 , K54 , K55 , K56 , K57 }, \ + { K60 , K61 , K62 , K63 , K64 , K65 , K66 , K67 }, \ + { KC_NO , K71 , K72 , K73 , K74 , K75 , K76 , K77 }, \ + { K80 , K81 , K82 , KC_NO, KC_NO, KC_NO, KC_NO, KC_NO} \ +} + + + + +#define LAYOUT_all LAYOUT_alice_split_bs diff --git a/keyboards/kapcave/arya/chconf.h b/keyboards/kapcave/arya/chconf.h new file mode 100644 index 0000000000..d5c78af075 --- /dev/null +++ b/keyboards/kapcave/arya/chconf.h @@ -0,0 +1,25 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#define CH_CFG_ST_RESOLUTION 16 + +#define CH_CFG_INTERVALS_SIZE 16 + +#include_next + diff --git a/keyboards/kapcave/arya/config.h b/keyboards/kapcave/arya/config.h new file mode 100644 index 0000000000..62df795ff5 --- /dev/null +++ b/keyboards/kapcave/arya/config.h @@ -0,0 +1,68 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4B43 +#define PRODUCT_ID 0x4152 +#define DEVICE_VER 0x0001 +#define MANUFACTURER KapCave +#define PRODUCT Arya + +/* key matrix size */ +#define MATRIX_ROWS 9 +#define MATRIX_COLS 8 + +#define MATRIX_COL_PINS { B0, B5, B4, B2, C13, F1, F0, A14} +#define MATRIX_ROW_PINS { B8, A13, B1, A15, B9, B10, B11, A0, A8 } +#define DIODE_DIRECTION COL2ROW + + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +#define ENCODERS_PAD_A { B12, B14, C15 } +#define ENCODERS_PAD_B { B13, B15, C14 } + +#define ENCODER_RESOLUTION 2 +#define TAP_CODE_DELAY 25 + +#define DYNAMIC_KEYMAP_LAYER_COUNT 3 + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION diff --git a/keyboards/kapcave/arya/halconf.h b/keyboards/kapcave/arya/halconf.h new file mode 100644 index 0000000000..dffa322d19 --- /dev/null +++ b/keyboards/kapcave/arya/halconf.h @@ -0,0 +1,23 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#define HAL_USE_PWM TRUE + +#include_next + diff --git a/keyboards/kapcave/arya/info.json b/keyboards/kapcave/arya/info.json new file mode 100644 index 0000000000..fb220aa070 --- /dev/null +++ b/keyboards/kapcave/arya/info.json @@ -0,0 +1,77 @@ +{ + "keyboard_name": "Arya", + "url": "https://kapcave.com/products/arya", + "maintainer": "nachie", + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"Esc", "x":2.75, "y":5.9}, + {"label":"\u00ac", "x":4, "y":6.0}, + {"label":"!", "x":5, "y":6.0}, + {"label":"\"", "x":6, "y":6.0}, + {"label":"_", "x":15.25, "y":6.0}, + {"label":"+", "x":16.25, "y":6.0}, + {"label":"", "x":17.25, "y":6.0}, + {"label":"", "x":18.25, "y":6.0}, + {"label":"Pg Up", "x":2.5, "y":6.9}, + {"label":"Tab", "x":3.75, "y":7.0, "w":1.5}, + {"label":"Q", "x":5.25, "y":7.0}, + {"label":"P", "x":15, "y":7.0}, + {"label":"{", "x":16, "y":7.0}, + {"label":"}", "x":17, "y":7.0}, + {"label":"|", "x":18, "y":7.0, "w":1.5}, + {"label":"Pg Dn", "x":2.25, "y":7.9}, + {"label":"Caps Lock", "x":3.5, "y":8.0, "w":1.75}, + {"label":"A", "x":5.25, "y":8.0}, + {"label":":", "x":15.5, "y":8.0}, + {"label":"\"", "x":16.5, "y":8.0}, + {"label":"Enter", "x":17.5, "y":8.0, "w":2.25}, + {"label":"Shift", "x":3.25, "y":9.0, "w":2.25}, + {"label":"Z", "x":5.5, "y":9.0}, + {"label":">", "x":15.25, "y":9.0}, + {"label":"?", "x":16.25, "y":9.0}, + {"label":"Shift", "x":17.25, "y":9.0, "w":1.75}, + {"label":"Fn", "x":19, "y":9.0}, + {"label":"Ctrl", "x":3.25, "y":10.0, "w":1.5}, + {"label":"Ctrl", "x":18.25, "y":10.0, "w":1.5}, + {"label":"\u00a3", "x":8.25, "y":4.5}, + {"label":"$", "x":9.25, "y":4.5}, + {"label":"%", "x":10.25, "y":4.5}, + {"label":"^", "x":11.25, "y":4.5}, + {"label":"W", "x":7.75, "y":5.5}, + {"label":"E", "x":8.75, "y":5.5}, + {"label":"R", "x":9.75, "y":5.5}, + {"label":"T", "x":10.75, "y":5.5}, + {"label":"S", "x":8, "y":6.5}, + {"label":"D", "x":9, "y":6.5}, + {"label":"F", "x":10, "y":6.5}, + {"label":"G", "x":11, "y":6.5}, + {"label":"X", "x":8.5, "y":7.5}, + {"label":"C", "x":9.5, "y":7.5}, + {"label":"V", "x":10.5, "y":7.5}, + {"label":"B", "x":11.5, "y":7.5}, + {"label":"Alt", "x":8.25, "y":8.5, "w":1.5}, + {"label":"", "x":9.75, "y":8.5, "w":2}, + {"label":"Fn", "x":11.75, "y":8.5, "w":1.25}, + {"label":"&", "x":9.5, "y":9.0}, + {"label":"*", "x":10.5, "y":9.0}, + {"label":"(", "x":11.5, "y":9.0}, + {"label":")", "x":12.5, "y":9.0}, + {"label":"Y", "x":9, "y":10.0}, + {"label":"U", "x":10, "y":10.0}, + {"label":"I", "x":11, "y":10.0}, + {"label":"O", "x":12, "y":10.0}, + {"label":"H", "x":9.25, "y":11.0}, + {"label":"J", "x":10.25, "y":11.0}, + {"label":"K", "x":11.25, "y":11.0}, + {"label":"L", "x":12.25, "y":11.0}, + {"label":"Fn", "x":8.75, "y":12.0}, + {"label":"N", "x":9.75, "y":12.0}, + {"label":"M", "x":10.75, "y":12.0}, + {"label":"<", "x":11.75, "y":12.0}, + {"label":"Shift", "x":8.75, "y":13.0, "w":2.75}, + {"label":"Alt", "x":11.5, "y":13.0, "w":1.5} + ] + } + } +} \ No newline at end of file diff --git a/keyboards/kapcave/arya/keymaps/default/keymap.c b/keyboards/kapcave/arya/keymaps/default/keymap.c new file mode 100644 index 0000000000..b8300b1f4a --- /dev/null +++ b/keyboards/kapcave/arya/keymaps/default/keymap.c @@ -0,0 +1,34 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + LAYOUT_alice_split_bs( + KC_ESC, KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSLS, + KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, + KC_PGDN, KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), + KC_LGUI, KC_LALT, KC_SPC, KC_LGUI, KC_SPC, KC_RALT, KC_RCTL + ), + LAYOUT_alice_split_bs( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP , _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_RGHT, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DOWN, _______, _______, + _______, _______, _______, _______, _______, _______, _______ + ), +}; \ No newline at end of file diff --git a/keyboards/kapcave/arya/keymaps/default/readme.md b/keyboards/kapcave/arya/keymaps/default/readme.md new file mode 100644 index 0000000000..9d9894862a --- /dev/null +++ b/keyboards/kapcave/arya/keymaps/default/readme.md @@ -0,0 +1 @@ +The default layout for the KapCave Arya \ No newline at end of file diff --git a/keyboards/kapcave/arya/keymaps/via/keymap.c b/keyboards/kapcave/arya/keymaps/via/keymap.c new file mode 100644 index 0000000000..4b98707da7 --- /dev/null +++ b/keyboards/kapcave/arya/keymaps/via/keymap.c @@ -0,0 +1,56 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include QMK_KEYBOARD_H + +enum layer_names { + _BASE, // Default Layer + _FN, // Fn Layer 1 + _FN2, // Fn Layer 2 + _FN3 // Fn Layer 3 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* QWERTY */ + [_BASE] = LAYOUT_alice_split_bs( + KC_ESC, KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSLS, + KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, + KC_PGDN, KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), + KC_LGUI, KC_LALT, KC_SPC, KC_LGUI, KC_SPC, KC_RALT, KC_RCTL + ), + + /* FUNCTION */ + [_FN] = LAYOUT_alice_split_bs( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP , _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_RGHT, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DOWN, _______, _______, + _______, _______, _______, _______, _______, _______, _______ + ), + + [_FN2] = LAYOUT_alice_split_bs( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ , _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______ + ), + + +}; + diff --git a/keyboards/kapcave/arya/keymaps/via/readme.md b/keyboards/kapcave/arya/keymaps/via/readme.md new file mode 100644 index 0000000000..dcf12fbffd --- /dev/null +++ b/keyboards/kapcave/arya/keymaps/via/readme.md @@ -0,0 +1 @@ +The VIA Keymap for the KapCave Arya \ No newline at end of file diff --git a/keyboards/kapcave/arya/keymaps/via/rules.mk b/keyboards/kapcave/arya/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/kapcave/arya/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/kapcave/arya/mcuconf.h b/keyboards/kapcave/arya/mcuconf.h new file mode 100644 index 0000000000..5c161dbe3c --- /dev/null +++ b/keyboards/kapcave/arya/mcuconf.h @@ -0,0 +1,33 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once +#include_next + +/* enable TIM1, used for backlight PWM */ +#undef STM32_PWM_USE_TIM1 +#define STM32_PWM_USE_TIM1 TRUE + +/* enable TIM2, used for underglow PWM driver */ +#undef STM32_PWM_USE_TIM2 +#define STM32_PWM_USE_TIM2 TRUE + +/* move system from TIM2 (default) to TIM3 (since TIM2 is needed for underglow) */ +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 FALSE +#undef STM32_ST_USE_TIMER +#define STM32_ST_USE_TIMER 3 diff --git a/keyboards/kapcave/arya/readme.md b/keyboards/kapcave/arya/readme.md new file mode 100644 index 0000000000..12fe9684a5 --- /dev/null +++ b/keyboards/kapcave/arya/readme.md @@ -0,0 +1,23 @@ +# KapCave Arya + +Firmware for the KapCave Arya Keyboard + +* Keyboard Maintainer: [KapCave](https://github.com/nachie) +* Hardware Supported: Arya PCB +* Hardware Availability: [KapCave](https://kapcave.com/products/arya-pcb) + +Make example for this keyboard (after setting up your build environment): + + make kapcave/arya:default + +Or to make and flash: + + make kapcave/arya:default:flash + + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +* **Bootmagic reset**: Hold down Right Space key and plug in the keyboard +* **Physical reset button**: Briefly press the button labeled "SW_RST1" on the back of the PCB diff --git a/keyboards/kapcave/arya/rules.mk b/keyboards/kapcave/arya/rules.mk new file mode 100644 index 0000000000..4732327713 --- /dev/null +++ b/keyboards/kapcave/arya/rules.mk @@ -0,0 +1,25 @@ +# MCU name +MCU = STM32F072 + +# Bootloader selection +BOOTLOADER = stm32-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +ENCODER_ENABLE = yes + +# Enter lower-power sleep mode when on the ChibiOS idle thread +OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE diff --git a/keyboards/kapcave/gskt00/config.h b/keyboards/kapcave/gskt00/config.h new file mode 100755 index 0000000000..91c34182e7 --- /dev/null +++ b/keyboards/kapcave/gskt00/config.h @@ -0,0 +1,52 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4B43 +#define PRODUCT_ID 0x6061 +#define DEVICE_VER 0x0001 +#define MANUFACTURER KapCave +#define PRODUCT GSKT00 + +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 8 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { F1, D1, D2, D4, D6, F7, B0, F4 } +#define MATRIX_COL_PINS { F6, D7, F5, C7, B4, C6, B6, B5 } +#define UNUSED_PINS + +#define BOOTMAGIC_LITE_ROW 3 +#define BOOTMAGIC_LITE_COLUMN 6 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + + diff --git a/keyboards/kapcave/gskt00/gskt00.c b/keyboards/kapcave/gskt00/gskt00.c new file mode 100755 index 0000000000..c2c2d823f9 --- /dev/null +++ b/keyboards/kapcave/gskt00/gskt00.c @@ -0,0 +1,18 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include "gskt00.h" + diff --git a/keyboards/gskt00/gskt00.h b/keyboards/kapcave/gskt00/gskt00.h similarity index 79% rename from keyboards/gskt00/gskt00.h rename to keyboards/kapcave/gskt00/gskt00.h index 151155d7f7..d0ac51acd7 100755 --- a/keyboards/gskt00/gskt00.h +++ b/keyboards/kapcave/gskt00/gskt00.h @@ -1,3 +1,20 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + #pragma once #include "quantum.h" diff --git a/keyboards/gskt00/info.json b/keyboards/kapcave/gskt00/info.json similarity index 98% rename from keyboards/gskt00/info.json rename to keyboards/kapcave/gskt00/info.json index 0b81c58514..ba1455fae9 100644 --- a/keyboards/gskt00/info.json +++ b/keyboards/kapcave/gskt00/info.json @@ -1,6 +1,6 @@ { - "keyboard_name": "gskt00", - "url": "", + "keyboard_name": "GSKT-00", + "url": "https://kapcave.com/products/gskt-00-pcb-usb-c", "maintainer": "nachie", "layouts": { "LAYOUT_60_ansi_tsangan": { diff --git a/keyboards/kapcave/gskt00/keymaps/default-poly/config.h b/keyboards/kapcave/gskt00/keymaps/default-poly/config.h new file mode 100644 index 0000000000..2db5749cb5 --- /dev/null +++ b/keyboards/kapcave/gskt00/keymaps/default-poly/config.h @@ -0,0 +1,39 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#pragma once + +#define ENCODERS_PAD_A { D5 } +#define ENCODERS_PAD_B { D3 } + +#define RGB_DI_PIN D0 +#ifdef RGB_DI_PIN +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE +#define RGBLED_NUM 14 +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 12 +#endif + diff --git a/keyboards/kapcave/gskt00/keymaps/default-poly/keymap.c b/keyboards/kapcave/gskt00/keymaps/default-poly/keymap.c new file mode 100755 index 0000000000..8c7e9720db --- /dev/null +++ b/keyboards/kapcave/gskt00/keymaps/default-poly/keymap.c @@ -0,0 +1,70 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* QWERTY */ + LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSLS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, + MO(3), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, MO(3), + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_LCTL), + + /* DVORAK */ + LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_GRV, KC_BSLS, + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_BSPC, + MO(3), KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, KC_ENT, + KC_LSFT, KC_NUBS, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_LSFT, MO(3), + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_RCTL), + + /* COLEMAK */ + LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSLS, + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSPC, + MO(3), KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, MO(3), + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_RCTL), + + /* FUNCTION */ + LAYOUT_all( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_PGUP, KC_UP, KC_PGDN, KC_PSCR, KC_SLCK, KC_PAUS, KC_BSPC, + KC_TRNS, KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_TRNS, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, + KC_CAPS, KC_TRNS, KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_TRNS, KC_END, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_MOD, KC_TRNS, RGB_TOG) + +}; + +bool encoder_update_user(uint8_t index, bool clockwise) { + if (index == 0) { /* First encoder */ + if (clockwise) { + tap_code(KC_PGDN); + } else { + tap_code(KC_PGUP); + } + } else if (index == 1) { /* Second encoder */ + if (clockwise) { + tap_code(KC_UP); + } else { + tap_code(KC_DOWN); + } + } + return true; +} \ No newline at end of file diff --git a/keyboards/kapcave/gskt00/keymaps/default-poly/readme.md b/keyboards/kapcave/gskt00/keymaps/default-poly/readme.md new file mode 100644 index 0000000000..1f6d7bcd38 --- /dev/null +++ b/keyboards/kapcave/gskt00/keymaps/default-poly/readme.md @@ -0,0 +1 @@ +There was a private run of Polycarbonate cases. This keymap supports the underglow PCBs that shipped out with those, in addition to future underglow pcbs. These PCBs also had encoder support which is reflected in the keymap. \ No newline at end of file diff --git a/keyboards/kapcave/gskt00/keymaps/default-poly/rules.mk b/keyboards/kapcave/gskt00/keymaps/default-poly/rules.mk new file mode 100644 index 0000000000..53c9db2bd2 --- /dev/null +++ b/keyboards/kapcave/gskt00/keymaps/default-poly/rules.mk @@ -0,0 +1,2 @@ +RGBLIGHT_ENABLE = yes +ENCODER_ENABLE = yes \ No newline at end of file diff --git a/keyboards/gskt00/keymaps/default/keymap.c b/keyboards/kapcave/gskt00/keymaps/default/keymap.c similarity index 54% rename from keyboards/gskt00/keymaps/default/keymap.c rename to keyboards/kapcave/gskt00/keymaps/default/keymap.c index 225d0224ea..0d8d6dad6b 100755 --- a/keyboards/gskt00/keymaps/default/keymap.c +++ b/keyboards/kapcave/gskt00/keymaps/default/keymap.c @@ -1,3 +1,19 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { @@ -10,22 +26,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, MO(3), KC_LGUI, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(3)), - /* DVORAK */ - LAYOUT_all( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_RBRC, KC_GRV, KC_BSLS, - KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_EQL, KC_BSPC, - MO(3), KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, KC_ENT, - KC_LSFT, KC_NUBS, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_LSFT, MO(3), - KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_RCTL), - - /* COLEMAK */ - LAYOUT_all( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSLS, - KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_LBRC, KC_RBRC, KC_BSPC, - MO(3), KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, KC_ENT, - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, MO(3), - KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, KC_RCTL), - /* FUNCTION */ LAYOUT_all( KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, @@ -35,3 +35,4 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_MOD, KC_TRNS, RGB_TOG) }; + diff --git a/keyboards/kapcave/gskt00/keymaps/default/readme.md b/keyboards/kapcave/gskt00/keymaps/default/readme.md new file mode 100644 index 0000000000..042b07d148 --- /dev/null +++ b/keyboards/kapcave/gskt00/keymaps/default/readme.md @@ -0,0 +1 @@ +The default keymap for the GSKT-00 PCB. \ No newline at end of file diff --git a/keyboards/gskt00/keymaps/nachie/keymap.c b/keyboards/kapcave/gskt00/keymaps/nachie/keymap.c similarity index 100% rename from keyboards/gskt00/keymaps/nachie/keymap.c rename to keyboards/kapcave/gskt00/keymaps/nachie/keymap.c diff --git a/keyboards/kapcave/gskt00/keymaps/via/keymap.c b/keyboards/kapcave/gskt00/keymaps/via/keymap.c new file mode 100755 index 0000000000..95bc131422 --- /dev/null +++ b/keyboards/kapcave/gskt00/keymaps/via/keymap.c @@ -0,0 +1,57 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include QMK_KEYBOARD_H + +enum layer_names { + _BASE, // Default Layer + _FN, // Fn Layer 1 + _FN2, // Fn Layer 2 + _FN3 // Fn Layer 3 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* QWERTY */ + [_BASE] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, MO(3), + KC_LGUI, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(3)), + + /* FUNCTION */ + [_FN] = LAYOUT_all( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, + KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SLCK, KC_PAUS, KC_UP, KC_PAUS, KC_DEL, + KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_EJCT, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [_FN2] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______), + + [_FN3] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______) +}; diff --git a/keyboards/kapcave/gskt00/keymaps/via/readme.md b/keyboards/kapcave/gskt00/keymaps/via/readme.md new file mode 100644 index 0000000000..c5c3db7e3b --- /dev/null +++ b/keyboards/kapcave/gskt00/keymaps/via/readme.md @@ -0,0 +1 @@ +The via keymap for the GSKT-00 PCB. \ No newline at end of file diff --git a/keyboards/kapcave/gskt00/keymaps/via/rules.mk b/keyboards/kapcave/gskt00/keymaps/via/rules.mk new file mode 100644 index 0000000000..036bd6d1c3 --- /dev/null +++ b/keyboards/kapcave/gskt00/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes \ No newline at end of file diff --git a/keyboards/kapcave/gskt00/readme.md b/keyboards/kapcave/gskt00/readme.md new file mode 100644 index 0000000000..d1a90ca583 --- /dev/null +++ b/keyboards/kapcave/gskt00/readme.md @@ -0,0 +1,23 @@ +# GSKT-00 PCB + +Firmware for the GSKT-00 PCB + +* Keyboard Maintainer: [KapCave](https://github.com/nachie) +* Hardware Supported: GSKT-00 PCB +* Hardware Availability: [KapCave](https://kapcave.com/products/gskt-00-pcb-usb-c) + +Make example for this keyboard (after setting up your build environment): + + make kapcave/gskt00:default + +Or to make and flash: + + make kapcave/gskt00:default:flash + + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +* **Bootmagic reset**: Hold down ESC key (top left) and plug in the keyboard +* **Physical reset button**: Briefly press the button labeled "SW_RST1" on the back of the PCB diff --git a/keyboards/gskt00/rules.mk b/keyboards/kapcave/gskt00/rules.mk similarity index 92% rename from keyboards/gskt00/rules.mk rename to keyboards/kapcave/gskt00/rules.mk index 4e262e042f..0c803ec2e2 100755 --- a/keyboards/gskt00/rules.mk +++ b/keyboards/kapcave/gskt00/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/paladin64/config.h b/keyboards/kapcave/paladin64/config.h similarity index 79% rename from keyboards/paladin64/config.h rename to keyboards/kapcave/paladin64/config.h index 10e4901a66..2685be96cf 100755 --- a/keyboards/paladin64/config.h +++ b/keyboards/kapcave/paladin64/config.h @@ -1,18 +1,38 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ #pragma once #include "config_common.h" /* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6060 +#define VENDOR_ID 0x4B43 +#define PRODUCT_ID 0x5036 #define DEVICE_VER 0x0001 -#define MANUFACTURER inachie +#define MANUFACTURER KapCave #define PRODUCT paladin64 /* key matrix size */ #define MATRIX_ROWS 8 #define MATRIX_COLS 8 +#define BOOTMAGIC_LITE_ROW 3 +#define BOOTMAGIC_LITE_COLUMN 6 + +/* Only required if you add in a trackpoint hardware to the pcb */ #ifdef PS2_USE_USART #define PS2_CLOCK_PORT PORTD #define PS2_CLOCK_PIN PIND diff --git a/keyboards/paladin64/info.json b/keyboards/kapcave/paladin64/info.json similarity index 98% rename from keyboards/paladin64/info.json rename to keyboards/kapcave/paladin64/info.json index 628b1c8c8d..207010c24e 100644 --- a/keyboards/paladin64/info.json +++ b/keyboards/kapcave/paladin64/info.json @@ -1,7 +1,7 @@ { - "keyboard_name": "paladin64", - "url": "", - "maintainer": "qmk", + "keyboard_name": "Paladin64", + "url": "https://kapcave.com/products/paladin64-pcb", + "maintainer": "nachie", "layouts": { "LAYOUT_all": { "layout": [{"label":"~", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Win", "x":11.25, "y":4, "w":1.25}, {"label":"Menu", "x":12.5, "y":4, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":4, "w":1.25}] diff --git a/keyboards/paladin64/keymaps/default/keymap.c b/keyboards/kapcave/paladin64/keymaps/default/keymap.c similarity index 81% rename from keyboards/paladin64/keymaps/default/keymap.c rename to keyboards/kapcave/paladin64/keymaps/default/keymap.c index 15c5858a81..ed906909fe 100755 --- a/keyboards/paladin64/keymaps/default/keymap.c +++ b/keyboards/kapcave/paladin64/keymaps/default/keymap.c @@ -1,3 +1,19 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { diff --git a/keyboards/kapcave/paladin64/keymaps/default/readme.md b/keyboards/kapcave/paladin64/keymaps/default/readme.md new file mode 100644 index 0000000000..11248150d9 --- /dev/null +++ b/keyboards/kapcave/paladin64/keymaps/default/readme.md @@ -0,0 +1 @@ +The default keymap for Paladin64 \ No newline at end of file diff --git a/keyboards/kapcave/paladin64/keymaps/via/keymap.c b/keyboards/kapcave/paladin64/keymaps/via/keymap.c new file mode 100644 index 0000000000..7ce94a5ef4 --- /dev/null +++ b/keyboards/kapcave/paladin64/keymaps/via/keymap.c @@ -0,0 +1,59 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include QMK_KEYBOARD_H + +enum layer_names { + _BASE, // Default Layer + _FN, // Fn Layer 1 + _FN2, // Fn Layer 2 + _FN3 // Fn Layer 3 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* QWERTY */ + [_BASE] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSLS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, + MO(3), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, MO(3), + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_APP, KC_RGUI, KC_RALT, KC_LCTL), + + /* FUNCTION */ + [_FN] = LAYOUT_all( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_PGUP, KC_UP, KC_PGDN, KC_PSCR, KC_SLCK, KC_PAUS, KC_BSPC, + KC_TRNS, KC_TRNS, KC_MPRV, KC_MPLY, KC_MNXT, KC_TRNS, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, + KC_CAPS, KC_TRNS, KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_TRNS, KC_END, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_MOD, KC_TRNS, RGB_TOG), + + [_FN2] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______), + + [_FN3] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______) + +}; + diff --git a/keyboards/kapcave/paladin64/keymaps/via/readme.md b/keyboards/kapcave/paladin64/keymaps/via/readme.md new file mode 100644 index 0000000000..2cf66cd4cb --- /dev/null +++ b/keyboards/kapcave/paladin64/keymaps/via/readme.md @@ -0,0 +1 @@ +Via layout for the paladin64 pcb \ No newline at end of file diff --git a/keyboards/kapcave/paladin64/keymaps/via/rules.mk b/keyboards/kapcave/paladin64/keymaps/via/rules.mk new file mode 100644 index 0000000000..036bd6d1c3 --- /dev/null +++ b/keyboards/kapcave/paladin64/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes \ No newline at end of file diff --git a/keyboards/kapcave/paladin64/paladin64.c b/keyboards/kapcave/paladin64/paladin64.c new file mode 100755 index 0000000000..88dd1fdff2 --- /dev/null +++ b/keyboards/kapcave/paladin64/paladin64.c @@ -0,0 +1,18 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include "paladin64.h" + diff --git a/keyboards/paladin64/paladin64.h b/keyboards/kapcave/paladin64/paladin64.h similarity index 86% rename from keyboards/paladin64/paladin64.h rename to keyboards/kapcave/paladin64/paladin64.h index 1a55cf328f..b578c18540 100755 --- a/keyboards/paladin64/paladin64.h +++ b/keyboards/kapcave/paladin64/paladin64.h @@ -1,3 +1,19 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ #pragma once #include "quantum.h" diff --git a/keyboards/kapcave/paladin64/readme.md b/keyboards/kapcave/paladin64/readme.md new file mode 100644 index 0000000000..cc4a9b67e3 --- /dev/null +++ b/keyboards/kapcave/paladin64/readme.md @@ -0,0 +1,24 @@ +# Paladin64 ALPS PCB + +Firmware for the Paladin64 ALPS64 PCB, with underglow and an optional +trackpoint module. + +* Keyboard Maintainer: [KapCave](https://github.com/nachie) +* Hardware Supported: Paladin64 ALPS PCB +* Hardware Availability: [KapCave](https://kapcave.com/products/paladin64-pcb) + +Make example for this keyboard (after setting up your build environment): + + make kapcave/paladin64:default + +Or to make and flash: + + make kapcave/paladin64:default:flash + + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +* **Bootmagic reset**: Hold down ESC key (top left) and plug in the keyboard +* **Physical reset button**: Briefly press the button labeled "SW_RST1" on the back of the PCB diff --git a/keyboards/kapcave/paladin64/rules.mk b/keyboards/kapcave/paladin64/rules.mk new file mode 100755 index 0000000000..f526755d4b --- /dev/null +++ b/keyboards/kapcave/paladin64/rules.mk @@ -0,0 +1,23 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output + +LAYOUTS = 60_ansi diff --git a/keyboards/kapcave/paladinpad/config.h b/keyboards/kapcave/paladinpad/config.h new file mode 100644 index 0000000000..9b3c9a4ca0 --- /dev/null +++ b/keyboards/kapcave/paladinpad/config.h @@ -0,0 +1,46 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4B43 +#define PRODUCT_ID 0x5050 +#define MANUFACTURER KapCave +#define PRODUCT paladinpad + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 4 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* number of backlight levels */ + +#ifdef BACKLIGHT_PIN +#define BACKLIGHT_LEVELS 3 +#endif + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* prevent stuck modifiers */ +#define PREVENT_STUCK_MODIFIERS + + diff --git a/keyboards/kapcave/paladinpad/info.json b/keyboards/kapcave/paladinpad/info.json new file mode 100644 index 0000000000..7d1afccf60 --- /dev/null +++ b/keyboards/kapcave/paladinpad/info.json @@ -0,0 +1,82 @@ +{ + "keyboard_name": "PaladinPad", + "url": "https://kapcave.com/products/paladinpad-pcb", + "maintainer": "nachie", + "layouts": { + "LAYOUT_ortho_5x4": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":0, "y":1}, + {"x":1, "y":1}, + {"x":2, "y":1}, + {"x":3, "y":1}, + {"x":0, "y":2}, + {"x":1, "y":2}, + {"x":2, "y":2}, + {"x":3, "y":2}, + {"x":0, "y":3}, + {"x":1, "y":3}, + {"x":2, "y":3}, + {"x":3, "y":3}, + {"x":0, "y":4}, + {"x":1, "y":4}, + {"x":2, "y":4}, + {"x":3, "y":4} + ] + }, + "LAYOUT_numpad_aek": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + + {"x":0, "y":1}, + {"x":1, "y":1}, + {"x":2, "y":1}, + {"x":3, "y":1}, + + {"x":0, "y":2}, + {"x":1, "y":2}, + {"x":2, "y":2}, + {"x":3, "y":2}, + + {"x":0, "y":3}, + {"x":1, "y":3}, + {"x":2, "y":3}, + + {"x":0, "y":4, "w":2}, + {"x":2, "y":4}, + {"x":3, "y":3, "h":2} + ] + }, + "LAYOUT_numpad_5x4": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + + {"x":0, "y":1}, + {"x":1, "y":1}, + {"x":2, "y":1}, + + {"x":0, "y":2}, + {"x":1, "y":2}, + {"x":2, "y":2}, + {"x":3, "y":1, "h":2}, + + {"x":0, "y":3}, + {"x":1, "y":3}, + {"x":2, "y":3}, + + {"x":0, "y":4, "w":2}, + {"x":2, "y":4}, + {"x":3, "y":3, "h":2} + ] + } + } +} diff --git a/keyboards/kapcave/paladinpad/keymaps/aek/keymap.c b/keyboards/kapcave/paladinpad/keymaps/aek/keymap.c new file mode 100644 index 0000000000..79c3baae44 --- /dev/null +++ b/keyboards/kapcave/paladinpad/keymaps/aek/keymap.c @@ -0,0 +1,38 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include QMK_KEYBOARD_H + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* DEFAULT */ + LAYOUT_numpad_aek( + MO(1), KC_PEQL, KC_PSLS, KC_PAST, + KC_P7, KC_P8, KC_P9, KC_PMNS, + KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_P1, KC_P2, KC_P3, + KC_P0, KC_PDOT, KC_PENT), + + /* FUNCTION */ + LAYOUT_numpad_aek( + KC_TRNS, RGB_TOG, RGB_MOD, KC_TRNS, + RGB_HUI, RGB_SAI, RGB_VAI, KC_TRNS, + RGB_HUD, RGB_SAD, RGB_VAD, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, RESET, KC_NLCK) +}; + diff --git a/keyboards/kapcave/paladinpad/keymaps/aek/readme.md b/keyboards/kapcave/paladinpad/keymaps/aek/readme.md new file mode 100644 index 0000000000..44b106fa6b --- /dev/null +++ b/keyboards/kapcave/paladinpad/keymaps/aek/readme.md @@ -0,0 +1 @@ +The keymap for PaladinPad which resembles the AEK Numpad \ No newline at end of file diff --git a/keyboards/kapcave/paladinpad/keymaps/default/keymap.c b/keyboards/kapcave/paladinpad/keymaps/default/keymap.c new file mode 100644 index 0000000000..30dd1b9c00 --- /dev/null +++ b/keyboards/kapcave/paladinpad/keymaps/default/keymap.c @@ -0,0 +1,38 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include QMK_KEYBOARD_H + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* DEFAULT */ + LAYOUT_numpad_5x4( + MO(1), KC_PAST, KC_PSLS, KC_PMNS, + KC_P7, KC_P8, KC_P9, + KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_P1, KC_P2, KC_P3, + KC_P0, KC_PDOT, KC_PENT), + + /* FUNCTION */ + LAYOUT_numpad_5x4( + KC_TRNS, RGB_TOG, RGB_MOD, KC_TRNS, + RGB_HUI, RGB_SAI, RGB_VAI, + RGB_HUD, RGB_SAD, RGB_VAD, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, RESET, KC_NLCK) +}; + diff --git a/keyboards/kapcave/paladinpad/keymaps/default/readme.md b/keyboards/kapcave/paladinpad/keymaps/default/readme.md new file mode 100644 index 0000000000..2ade4edf38 --- /dev/null +++ b/keyboards/kapcave/paladinpad/keymaps/default/readme.md @@ -0,0 +1 @@ +The default keymap for PaladinPad which resembles the AEK Numpad \ No newline at end of file diff --git a/keyboards/kapcave/paladinpad/keymaps/ortho/keymap.c b/keyboards/kapcave/paladinpad/keymaps/ortho/keymap.c new file mode 100644 index 0000000000..a65b53b341 --- /dev/null +++ b/keyboards/kapcave/paladinpad/keymaps/ortho/keymap.c @@ -0,0 +1,53 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include QMK_KEYBOARD_H + +enum custom_keycodes { + DBLZERO = SAFE_RANGE +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* DEFAULT */ + LAYOUT_ortho_5x4( + MO(1), KC_PSLS, KC_PAST, KC_BSPC, + KC_P7, KC_P8, KC_P9, KC_MINS, + KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_P1, KC_P2, KC_P3, KC_EQL, + DBLZERO, KC_P0, KC_PDOT, KC_PENT), + + /* FUNCTION */ + LAYOUT_ortho_5x4( + KC_TRNS, RGB_TOG, RGB_MOD, KC_TRNS, + RGB_HUI, RGB_SAI, RGB_VAI, KC_TRNS, + RGB_HUD, RGB_SAD, RGB_VAD, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, RESET, KC_NLCK) +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case DBLZERO: + if (record->event.pressed) { + SEND_STRING("00"); + } + break; + } + return true; +} + + diff --git a/keyboards/kapcave/paladinpad/keymaps/ortho/readme.md b/keyboards/kapcave/paladinpad/keymaps/ortho/readme.md new file mode 100644 index 0000000000..4dc98d30f4 --- /dev/null +++ b/keyboards/kapcave/paladinpad/keymaps/ortho/readme.md @@ -0,0 +1 @@ +The ortho keymap for PaladinPad which makes it a 5x4 ortho pad \ No newline at end of file diff --git a/keyboards/kapcave/paladinpad/keymaps/via/keymap.c b/keyboards/kapcave/paladinpad/keymaps/via/keymap.c new file mode 100644 index 0000000000..2315da4ace --- /dev/null +++ b/keyboards/kapcave/paladinpad/keymaps/via/keymap.c @@ -0,0 +1,59 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include QMK_KEYBOARD_H + +enum layer_names { + _BASE, // Default Layer + _FN, // Fn Layer 1 + _FN2, // Fn Layer 2 + _FN3 // Fn Layer 3 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* DEFAULT */ + [_BASE] = LAYOUT_ortho_5x4( + MO(1), KC_PSLS, KC_PAST, KC_BSPC, + KC_P7, KC_P8, KC_P9, KC_MINS, + KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_P1, KC_P2, KC_P3, KC_EQL, + KC_P0, KC_P0, KC_PDOT, KC_PENT), + + /* FUNCTION */ + [_FN] = LAYOUT_ortho_5x4( + KC_TRNS, RGB_TOG, RGB_MOD, KC_TRNS, + RGB_HUI, RGB_SAI, RGB_VAI, KC_TRNS, + RGB_HUD, RGB_SAD, RGB_VAD, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, RESET, KC_NLCK), + + /* FUNCTION */ + [_FN2] = LAYOUT_ortho_5x4( + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______), + + /* FUNCTION */ + [_FN3] = LAYOUT_ortho_5x4( + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______) +}; diff --git a/keyboards/kapcave/paladinpad/keymaps/via/rules.mk b/keyboards/kapcave/paladinpad/keymaps/via/rules.mk new file mode 100644 index 0000000000..600f7d16a7 --- /dev/null +++ b/keyboards/kapcave/paladinpad/keymaps/via/rules.mk @@ -0,0 +1,3 @@ +VIA_ENABLE = yes +# Not enough space on ATMega32u4 for RGB + Audio + Via +AUDIO_ENABLE = no \ No newline at end of file diff --git a/keyboards/kapcave/paladinpad/paladinpad.c b/keyboards/kapcave/paladinpad/paladinpad.c new file mode 100644 index 0000000000..063e49c872 --- /dev/null +++ b/keyboards/kapcave/paladinpad/paladinpad.c @@ -0,0 +1,17 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include "paladinpad.h" diff --git a/keyboards/kapcave/paladinpad/paladinpad.h b/keyboards/kapcave/paladinpad/paladinpad.h new file mode 100644 index 0000000000..54b320c424 --- /dev/null +++ b/keyboards/kapcave/paladinpad/paladinpad.h @@ -0,0 +1,103 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#pragma once + +#include "quantum.h" + +/* + * ┌─────┬─────┬─────┬─────┐ + * │Num1 │ Eq │Slsh │Star │ + * ├─────┼─────┼─────┼─────┤ + * │ 7 │ 8 │ 9 │ │ + * ├─────┼─────┼─────┤Plus │ + * │ 4 │ 5 │ 6 │ │ + * ├─────┼─────┼─────┼─────┤ + * │ 1 │ 2 │ 3 │ │ + * ├─────┴─────┼─────┤ Ent │ + * │ 0 │ . │ │ + * └───────────┴─────┴─────┘ + */ + +#define LAYOUT_numpad_5x4( \ + K_NUM1, K_SLSH, K_STAR, K_MINUS, \ + K_7, K_8, K_9, \ + K_4, K_5, K_6, K_PLUS, \ + K_1, K_2, K_3, \ + K_0, K_DOT, K_ENT \ +) { \ + { K_NUM1, K_SLSH, K_STAR, K_MINUS }, \ + { K_7, K_8, K_9, KC_NO }, \ + { K_4, K_5, K_6, K_PLUS }, \ + { K_1, K_2, K_3, K_ENT }, \ + { K_0, K_DOT, KC_NO, KC_NO } \ +} + +/* + * ┌─────┬─────┬─────┬─────┐ + * │Num1 │Eql │Slsh │Star │ + * ├─────┼─────┼─────┼─────┤ + * │ 7 │ 8 │ 9 │Minus│ + * ├─────┼─────┼─────┼─────┤ + * │ 4 │ 5 │ 6 │Plus │ + * ├─────┼─────┼─────┼─────┤ + * │ 1 │ 2 │ 3 │ │ + * ├─────┼─────┼─────┤ Ent │ + * │ 0 │ 10 │ . │ │ + * └─────┴─────┴─────┴─────┘ + */ + +#define LAYOUT_numpad_aek( \ + K_NUM1, K_EQ1, K_SLSH1, K_STAR1, \ + K_7, K_8, K_9, K_MINUS1, \ + K_4, K_5, K_6, K_PLUS, \ + K_1, K_2, K_3, \ + K_0, K_DOT1, K_ENT \ +) { \ + { K_NUM1, K_EQ1, K_SLSH1, K_STAR1 }, \ + { K_7, K_8, K_9, K_MINUS1 }, \ + { K_4, K_5, K_6, K_PLUS }, \ + { K_1, K_2, K_3, K_ENT }, \ + { K_0, K_DOT1, KC_NO, KC_NO } \ +} + +/* + * ┌─────┬─────┬─────┬─────┐ + * │Num1 │ Eq │Slsh │Star │ + * ├─────┼─────┼─────┼─────┤ + * │ 7 │ 8 │ 9 │Minus│ + * ├─────┼─────┼─────┼─────┤ + * │ 4 │ 5 │ 6 │Plus │ + * ├─────┼─────┼─────┼─────┤ + * │ 1 │ 2 │ 3 │ 11 │ + * ├─────┼─────┼─────┼─────┤ + * │ 0 │ 10 │ . │ Ent │ + * └─────┴─────┴─────┴─────┘ + */ + +#define LAYOUT_ortho_5x4( \ + K_NUM1, K_EQ1, K_SLSH1, K_STAR1, \ + K_7, K_8, K_9, K_MINUS1, \ + K_4, K_5, K_6, K_PLUS, \ + K_1, K_2, K_3, K_11, \ + K_0, K_10, K_DOT1, K_ENT \ +) { \ + { K_NUM1, K_EQ1, K_SLSH1, K_STAR1 }, \ + { K_7, K_8, K_9, K_MINUS1 }, \ + { K_4, K_5, K_6, K_PLUS }, \ + { K_1, K_2, K_3, K_ENT }, \ + { K_0, K_DOT1, K_10, K_11 } \ +} diff --git a/keyboards/kapcave/paladinpad/readme.md b/keyboards/kapcave/paladinpad/readme.md new file mode 100644 index 0000000000..f21c43d783 --- /dev/null +++ b/keyboards/kapcave/paladinpad/readme.md @@ -0,0 +1,23 @@ +# PaladinPad PCB + +Firmware for the PaladinPad, with underglow. + +* Keyboard Maintainer: [KapCave](https://github.com/nachie) +* Hardware Supported: PaladinPad +* Hardware Availability: [KapCave](https://kapcave.com/products/paladinpad-pcb) + +Make example for this keyboard (after setting up your build environment): + + make kapcave/paladinpad:default + +Or to make and flash: + + make kapcave/paladinpad:default:flash + + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +* **Bootmagic reset**: Hold down NumLock (Top Left) and plug in the keyboard +* **Physical reset button**: Briefly press the button labeled "SW_RST1" on the back of the PCB diff --git a/keyboards/kapcave/paladinpad/rev1/config.h b/keyboards/kapcave/paladinpad/rev1/config.h new file mode 100644 index 0000000000..84af56ec25 --- /dev/null +++ b/keyboards/kapcave/paladinpad/rev1/config.h @@ -0,0 +1,44 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#pragma once + +#include "config_common.h" + +#define DEVICE_VER 0x0001 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { C7, B6, B4, D7, D6 } +#define MATRIX_COL_PINS { D4, D5, D3, B7 } + +#define RGB_DI_PIN D0 + +#ifdef RGB_DI_PIN +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE +#define RGBLED_NUM 8 +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 12 +#endif diff --git a/keyboards/kapcave/paladinpad/rev1/rules.mk b/keyboards/kapcave/paladinpad/rev1/rules.mk new file mode 100644 index 0000000000..e69de29bb2 diff --git a/keyboards/kapcave/paladinpad/rev2/config.h b/keyboards/kapcave/paladinpad/rev2/config.h new file mode 100644 index 0000000000..a27ac03ab1 --- /dev/null +++ b/keyboards/kapcave/paladinpad/rev2/config.h @@ -0,0 +1,47 @@ +/* +Copyright 2021 KapCave + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#pragma once + +#include "config_common.h" + +#define DEVICE_VER 0x0002 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { F4, F6, D7, B4, D6 } +#define MATRIX_COL_PINS { F7, F5, D3, B7 } + +#define AUDIO_PIN C6 + +#define RGB_DI_PIN D0 + +#ifdef RGB_DI_PIN +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE +#define RGBLED_NUM 7 +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 12 +#endif + diff --git a/keyboards/kapcave/paladinpad/rev2/rules.mk b/keyboards/kapcave/paladinpad/rev2/rules.mk new file mode 100644 index 0000000000..e69de29bb2 diff --git a/keyboards/kapcave/paladinpad/rules.mk b/keyboards/kapcave/paladinpad/rules.mk new file mode 100644 index 0000000000..bb918b188d --- /dev/null +++ b/keyboards/kapcave/paladinpad/rules.mk @@ -0,0 +1,24 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output + +DEFAULT_FOLDER = kapcave/paladinpad/rev2 +LAYOUTS = numpad_5x4 ortho_5x4 diff --git a/keyboards/paladin64/paladin64.c b/keyboards/paladin64/paladin64.c deleted file mode 100755 index 5ef78d5bf7..0000000000 --- a/keyboards/paladin64/paladin64.c +++ /dev/null @@ -1,2 +0,0 @@ -#include "paladin64.h" - diff --git a/keyboards/paladin64/readme.md b/keyboards/paladin64/readme.md deleted file mode 100644 index 8d62bb6b71..0000000000 --- a/keyboards/paladin64/readme.md +++ /dev/null @@ -1,19 +0,0 @@ -# Paladin64 ALPS PCB by /u/iNachie - -Firmware for the Paladin64 ALPS64 PCB, with underglow and an optional -trackpoint module. - -Keyboard Maintainer: [/u/iNachie](https://github.com/nachie) -Hardware Supported: Paladin64 ALPS PCB by iNachie -Hardware Availability: [/u/iNachie](https://www.reddit.com/user/inachie/) - -Make example for this keyboard (after setting up your build environment): - - make paladin64:default - -Or to make and flash: - - make paladin64:default:dfu - - -See [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) then the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. diff --git a/keyboards/paladin64/rules.mk b/keyboards/paladin64/rules.mk deleted file mode 100755 index b25ab43119..0000000000 --- a/keyboards/paladin64/rules.mk +++ /dev/null @@ -1,24 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -AUDIO_ENABLE = no -RGBLIGHT_ENABLE = yes -#PS2_MOUSE_ENABLE = yes -#PS2_USE_USART = yes -#PS2_USE_INT = yes - -LAYOUTS = 60_ansi From 363eb645fc524efecc63b723a4b6d92fce29beaa Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Wed, 29 Sep 2021 00:38:41 -0700 Subject: [PATCH 154/595] [Keyboard] Fix end of file issue for Owlab suit80 (#14640) --- keyboards/owlab/suit80/iso/iso.h | 52 ++++++++++++++++---------------- 1 file changed, 26 insertions(+), 26 deletions(-) diff --git a/keyboards/owlab/suit80/iso/iso.h b/keyboards/owlab/suit80/iso/iso.h index 77cc55b452..f50236d01a 100644 --- a/keyboards/owlab/suit80/iso/iso.h +++ b/keyboards/owlab/suit80/iso/iso.h @@ -1,4 +1,4 @@ -/* +/* Copyright 2021 owlab This program is free software: you can redistribute it and/or modify @@ -20,33 +20,33 @@ along with this program. If not, see . #include "quantum.h" #define LAYOUT_all( \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K114, K214, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K213, K113, K313, K314, K412, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K413, K414, K510, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K506, K312, \ - K400, K503, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K511, \ - K500, K501, K502, K504, K507, K508, K509, K512, K513, K514 \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K114, K214, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K213, K113, K313, K314, K412, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K413, K414, K510, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K506, K312, \ + K400, K503, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K511, \ + K500, K501, K502, K504, K507, K508, K509, K512, K513, K514 \ ) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214 }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314 }, \ - { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414 }, \ - { K500, K501, K502, K503, K504, KC_NO, K506, K507, K508, K509, K510, K511, K512, K513, K514 } \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214 }, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314 }, \ + { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414 }, \ + { K500, K501, K502, K503, K504, KC_NO, K506, K507, K508, K509, K510, K511, K512, K513, K514 } \ } #define LAYOUT_iso( \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K114, K214, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K313, K314, K412, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K413, K414, K510, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K506, K312, \ - K400, K503, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K511, \ - K500, K501, K502, K504, K507, K508, K509, K512, K513, K514 \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K114, K214, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K313, K314, K412, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K413, K414, K510, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K506, K312, \ + K400, K503, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K511, \ + K500, K501, K502, K504, K507, K508, K509, K512, K513, K514 \ ) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, KC_NO, K214 }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314 }, \ - { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414 }, \ - { K500, K501, K502, K503, K504, KC_NO, K506, K507, K508, K509, K510, K511, K512, K513, K514 } \ -} \ No newline at end of file + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, KC_NO, K214 }, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314 }, \ + { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414 }, \ + { K500, K501, K502, K503, K504, KC_NO, K506, K507, K508, K509, K510, K511, K512, K513, K514 } \ +} From 0338481090f4c2330a7fd237416cf66ba2bd4d22 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Wed, 29 Sep 2021 09:30:25 -0700 Subject: [PATCH 155/595] [Keyboard] Updates for Tractyl Manuform config (#14641) --- .../tractyl_manuform/5x6_right/5x6_right.h | 2 + .../tractyl_manuform/5x6_right/f303/config.h | 104 ++++++++++++++++++ .../tractyl_manuform/5x6_right/f303/f303.c | 17 +++ .../tractyl_manuform/5x6_right/f303/f303.h | 19 ++++ .../tractyl_manuform/5x6_right/f303/halconf.h | 27 +++++ .../tractyl_manuform/5x6_right/f303/mcuconf.h | 40 +++++++ .../tractyl_manuform/5x6_right/f303/readme.md | 24 ++++ .../tractyl_manuform/5x6_right/f303/rules.mk | 13 +++ .../tractyl_manuform/5x6_right/f411/config.h | 3 - .../tractyl_manuform/5x6_right/f411/f411.c | 6 + .../tractyl_manuform/5x6_right/f411/halconf.h | 12 +- .../5x6_right/keymaps/drashna/keymap.c | 4 +- 12 files changed, 261 insertions(+), 10 deletions(-) create mode 100644 keyboards/handwired/tractyl_manuform/5x6_right/f303/config.h create mode 100644 keyboards/handwired/tractyl_manuform/5x6_right/f303/f303.c create mode 100644 keyboards/handwired/tractyl_manuform/5x6_right/f303/f303.h create mode 100644 keyboards/handwired/tractyl_manuform/5x6_right/f303/halconf.h create mode 100644 keyboards/handwired/tractyl_manuform/5x6_right/f303/mcuconf.h create mode 100644 keyboards/handwired/tractyl_manuform/5x6_right/f303/readme.md create mode 100644 keyboards/handwired/tractyl_manuform/5x6_right/f303/rules.mk diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/5x6_right.h b/keyboards/handwired/tractyl_manuform/5x6_right/5x6_right.h index 24aac66aee..e481e7841d 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/5x6_right.h +++ b/keyboards/handwired/tractyl_manuform/5x6_right/5x6_right.h @@ -19,6 +19,8 @@ #include "tractyl_manuform.h" #if defined(KEYBOARD_handwired_tractyl_manuform_5x6_right_f411) # include "f411.h" +#elif defined(KEYBOARD_handwired_tractyl_manuform_5x6_right_f303) +# include "f303.h" #elif defined(KEYBOARD_handwired_tractyl_manuform_5x6_right_teensy2pp) # include "teensy2pp.h" #endif diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f303/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/f303/config.h new file mode 100644 index 0000000000..f9a44587b0 --- /dev/null +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f303/config.h @@ -0,0 +1,104 @@ +/* +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#define PRODUCT Tractyl Manuform(5x6) Proton C + +// wiring of each half +#define MATRIX_COL_PINS \ + { B0, B1, B2, B3, B4, B5 } +#define MATRIX_ROW_PINS \ + { B10, B11, B12, A14, A13, A15 } + +#define UNUSED_PINS \ + { A0, A2, A7, A8 } +// B2 used for BOOT1, has internal pull down? +// A9 has internal pull-down +// A11 and A12 are used for USB sense. DO NOT USE. + +#define DIODE_DIRECTION COL2ROW + +// #define USB_VBUS_PIN B10 +#define SPLIT_HAND_PIN C14 // high = left, low = right + +// WS2812 RGB LED strip input and number of LEDs +#define RGB_DI_PIN A6 +#define WS2812_PWM_DRIVER PWMD3 // default: PWMD2 +#define WS2812_PWM_CHANNEL 1 // default: 2 +#define WS2812_PWM_PAL_MODE 2 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2 +//#define WS2812_PWM_COMPLEMENTARY_OUTPUT // Define for a complementary timer output (TIMx_CHyN); omit for a normal timer output (TIMx_CHy). +// #define WS2812_DMA_STREAM STM32_DMA1_STREAM3 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. +#define WS2812_DMA_CHANNEL 3 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. + +#define RGBLED_NUM 20 +#define RGBLIGHT_SPLIT +#define RGBLED_SPLIT \ + { 10, 10 } + +#define DEBUG_LED_PIN C13 + +/* Audio config */ +#define AUDIO_PIN A5 +#define AUDIO_PIN_ALT A4 +#define AUDIO_PIN_ALT_AS_NEGATIVE + +/* serial.c configuration for split keyboard */ +#define SERIAL_USART_FULL_DUPLEX // Enable full duplex operation mode. +#define SERIAL_USART_TX_PIN A9 +#define SERIAL_USART_RX_PIN A10 +#define SERIAL_USART_DRIVER SD1 +#define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 +#define SERIAL_USART_RX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 +#define SERIAL_USART_TIMEOUT 100 // USART driver timeout. default 100 + +/* i2c config for oleds */ +#define I2C_DRIVER I2CD1 +#define I2C1_SCL_PIN B6 +#define I2C1_SDA_PIN B7 +#define I2C1_SCL_PAL_MODE 4 +#define I2C1_SDA_PAL_MODE 4 +#define I2C1_CLOCK_SPEED 400000 + +/* encoder config */ +#define ENCODERS_PAD_A \ + { A7 } +#define ENCODERS_PAD_B \ + { A8 } + +/* spi config for eeprom and pmw3360 sensor */ +#define SPI_DRIVER SPID2 +#define SPI_SCK_PIN B13 +#define SPI_SCK_PAL_MODE 5 +#define SPI_MOSI_PIN B15 +#define SPI_MOSI_PAL_MODE 5 +#define SPI_MISO_PIN B14 +#define SPI_MISO_PAL_MODE 5 + +/* eeprom config */ +#define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN B8 +#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 8 +// #define EXTERNAL_EEPROM_BYTE_COUNT 8196 +// #define EXTERNAL_EEPROM_PAGE_SIZE 32 +// #define EXTERNAL_EEPROM_ADDRESS_SIZE 2 +// #define DEBUG_EEPROM_OUTPUT + +/* pmw3360 config */ +#define PMW3360_CS_PIN B9 +#define PMW3360_SPI_MODE 3 +#define PMW3360_SPI_DIVISOR 8 diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f303/f303.c b/keyboards/handwired/tractyl_manuform/5x6_right/f303/f303.c new file mode 100644 index 0000000000..d094801938 --- /dev/null +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f303/f303.c @@ -0,0 +1,17 @@ +/* Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "f303.h" diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f303/f303.h b/keyboards/handwired/tractyl_manuform/5x6_right/f303/f303.h new file mode 100644 index 0000000000..525b0378b4 --- /dev/null +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f303/f303.h @@ -0,0 +1,19 @@ +/* Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "5x6_right.h" diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f303/halconf.h b/keyboards/handwired/tractyl_manuform/5x6_right/f303/halconf.h new file mode 100644 index 0000000000..62f56e4d2b --- /dev/null +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f303/halconf.h @@ -0,0 +1,27 @@ +/* Copyright 2020 Nick Brassel (tzarc) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#define HAL_USE_PWM TRUE +#define HAL_USE_SERIAL TRUE +#define HAL_USE_I2C TRUE +#define HAL_USE_SPI TRUE +#define HAL_USE_GPT TRUE +#define HAL_USE_DAC TRUE +#define SPI_USE_WAIT TRUE +#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD + +#include_next diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f303/mcuconf.h b/keyboards/handwired/tractyl_manuform/5x6_right/f303/mcuconf.h new file mode 100644 index 0000000000..5525a077d2 --- /dev/null +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f303/mcuconf.h @@ -0,0 +1,40 @@ +/* Copyright 2020 Nick Brassel (tzarc) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include_next "mcuconf.h" + +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE + +#undef STM32_SPI_USE_SPI2 +#define STM32_SPI_USE_SPI2 TRUE + +#undef STM32_SERIAL_USE_USART1 +#define STM32_SERIAL_USE_USART1 TRUE + +#undef STM32_DAC_USE_DAC1_CH1 +#define STM32_DAC_USE_DAC1_CH1 TRUE + +#undef STM32_DAC_USE_DAC1_CH2 +#define STM32_DAC_USE_DAC1_CH2 TRUE + +#undef STM32_GPT_USE_TIM6 +#define STM32_GPT_USE_TIM6 TRUE + +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f303/readme.md b/keyboards/handwired/tractyl_manuform/5x6_right/f303/readme.md new file mode 100644 index 0000000000..79a4a8ca0e --- /dev/null +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f303/readme.md @@ -0,0 +1,24 @@ +# Drashna's Blackpill Tractyl Manuform (5x6) with a right side trackball + + +* Split Hand Pin, using PC14 +* Full Duplex Serial/USART using PA9 and PA10 on USART1 +* DAC Audio using PA4 and PA5 +* PWM RGB using PA6 TIM3 +* pmw3360 sensor using PA5-PA7 on SPI2, with B as CS pin +* 8KB SPI EEPROM chip sharing PB13-PB15 on SPI1 with PB9 as CS pin +* Encoder using PA7 and PA8 +* SSD1306 OLED display (128x64) using PB6 and PB7 on I2C1 + +* Keyboard Maintainer: [Drashna Jael're](https://github.com/drashna) +* Hardware Supported: [Design files](https://gitlab.com/keyboards1/dm_r_track/-/tree/master/boolean), [WeAct BlackPill (F411)](https://github.com/WeActTC/MiniSTM32F4x1), [PMW3360 Optical Sensor](https://www.tindie.com/products/jkicklighter/pmw3360-motion-sensor/) + +Make example for this keyboard (after setting up your build environment): + + make handwired/tractyl_manuform/5x6_right/f411:default + +Flashing example for this keyboard: + + make handwired/tractyl_manuform/5x6_right/f411:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f303/rules.mk b/keyboards/handwired/tractyl_manuform/5x6_right/f303/rules.mk new file mode 100644 index 0000000000..622d22704d --- /dev/null +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f303/rules.mk @@ -0,0 +1,13 @@ +# MCU name +MCU = STM32F303 + +# Bootloader selection +BOOTLOADER = stm32-dfu + +# KEYBOARD_SHARED_EP = yes +CONSOLE_ENABLE = yes + +EEPROM_DRIVER = spi +WS2812_DRIVER = pwm +SERIAL_DRIVER = usart +AUDIO_DRIVER = dac_additive diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h index 0e5b72c56b..7fb97cd2a4 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h @@ -28,9 +28,6 @@ along with this program. If not, see . #define UNUSED_PINS \ { C15 } -// B2 used for BOOT1, has internal pull down? -// A9 has internal pull-down -// A11 and A12 are used for USB sense. DO NOT USE. #define DIODE_DIRECTION COL2ROW diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/f411.c b/keyboards/handwired/tractyl_manuform/5x6_right/f411/f411.c index 240219f1d3..394c597b84 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/f411.c +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/f411.c @@ -23,3 +23,9 @@ void matrix_scan_sub_kb(void) { reset_keyboard(); } } + +bool usb_vbus_state(void) { + setPinInputLow(USB_VBUS_PIN); + wait_us(5); + return readPin(USB_VBUS_PIN); +} diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/halconf.h b/keyboards/handwired/tractyl_manuform/5x6_right/f411/halconf.h index fb835e8ee2..39644726c3 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/halconf.h +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/halconf.h @@ -15,10 +15,12 @@ */ #pragma once -#define HAL_USE_PWM TRUE -#define HAL_USE_SERIAL TRUE -#define HAL_USE_I2C TRUE -#define HAL_USE_SPI TRUE -#define HAL_USE_GPT TRUE +#define HAL_USE_PWM TRUE +#define HAL_USE_SERIAL TRUE +#define HAL_USE_I2C TRUE +#define HAL_USE_SPI TRUE +#define SPI_USE_WAIT TRUE +#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD +#define HAL_USE_GPT TRUE #include_next diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c b/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c index 81de8b2894..67842c26d0 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c +++ b/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c @@ -29,13 +29,13 @@ bool enable_acceleration = false; K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A \ ) \ LAYOUT_5x6_right_wrapper( \ - KC_ESC, ________________NUMBER_LEFT________________, ________________NUMBER_RIGHT_______________, UC_IRNY, \ + KC_ESC, ________________NUMBER_LEFT________________, ________________NUMBER_RIGHT_______________, UC_CLUE, \ SH_TT, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, SH_TT, \ LALT_T(KC_TAB), K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, RALT_T(K1B), \ OS_LSFT, CTL_T(K21), K22, K23, K24, K25, K26, K27, K28, K29, RCTL_T(K2A), OS_RSFT, \ OS_LALT, OS_LGUI, OS_RGUI, OS_RALT, \ KC_MUTE, KC_GRV, KC_BTN3, \ - KC_SPC, OS_LGUI, KC_ENT, \ + KC_SPC, UC_IRNY, KC_ENT, \ BK_LWER, TT(_MOUSE), TT(_MOUSE), DL_RAIS \ ) #define LAYOUT_base_wrapper(...) LAYOUT_5x6_right_base(__VA_ARGS__) From c89f74b929721d01bf8177aa10c3cd721247a857 Mon Sep 17 00:00:00 2001 From: jonavin <71780717+Jonavin@users.noreply.github.com> Date: Wed, 29 Sep 2021 12:42:53 -0400 Subject: [PATCH 156/595] [Keymap] Jonavin murphpad keymap update (#14637) Co-authored-by: Jonavin <=> --- .../murphpad/keymaps/jonavin/config.h | 3 + .../murphpad/keymaps/jonavin/keymap.c | 128 +++++++++++++++--- .../murphpad/keymaps/jonavin/readme.md | 43 +++--- users/jonavin/jonavin.c | 64 +++++++++ users/jonavin/jonavin.h | 12 +- 5 files changed, 216 insertions(+), 34 deletions(-) diff --git a/keyboards/mechwild/murphpad/keymaps/jonavin/config.h b/keyboards/mechwild/murphpad/keymaps/jonavin/config.h index 7c1621515a..2636ea4051 100644 --- a/keyboards/mechwild/murphpad/keymaps/jonavin/config.h +++ b/keyboards/mechwild/murphpad/keymaps/jonavin/config.h @@ -21,3 +21,6 @@ // Increase layers to 6 for VIA #define DYNAMIC_KEYMAP_LAYER_COUNT 6 + +// Remove line below for vertical layout +#define LANDSCAPE_MODE diff --git a/keyboards/mechwild/murphpad/keymaps/jonavin/keymap.c b/keyboards/mechwild/murphpad/keymaps/jonavin/keymap.c index 39e6ac87e4..dc03e334bf 100644 --- a/keyboards/mechwild/murphpad/keymaps/jonavin/keymap.c +++ b/keyboards/mechwild/murphpad/keymaps/jonavin/keymap.c @@ -18,7 +18,6 @@ #include "jonavin.h" #include "layout_landscape.h" -#define LANDSCAPE_MODE // Defines names for use in layer keycodes and the keymap enum layer_names { @@ -28,6 +27,7 @@ enum layer_names { _RGB }; +#ifdef LANDSCAPE_MODE const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_BASE] = LAYOUT_landscape( @@ -53,7 +53,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_FN2] = LAYOUT_landscape( _______, _______, RESET, - _______, _______, _______, _______, _______, _______, + _______, _______, KC_MPLY, KC_MPRV, KC_MNXT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, @@ -91,6 +91,73 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______ ), }; +#endif // LANDSCAPE_MODE + +#ifndef LANDSCAPE_MODE +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [_BASE] = LAYOUT( + TT(_FN2),TT(_FN3),TT(_FN4),LT(_RGB,KC_PSCR), + KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_MUTE, KC_P4, KC_P5, KC_P6, _______, + TT(_FN1), KC_P1, KC_P2, KC_P3, KC_PENT, + KC_RALT, KC_P0, _______, KC_PDOT, _______, + + TT(_FN3), TT(_FN4), TT(_RGB) + ), + [_FN1] = LAYOUT( + _______, _______, _______, RESET, + KC_CALC, _______, _______, _______, + _______, _______, _______, _______, + ENCFUNC, KC_TAB, _______, _______, _______, + _______, _______, _______, _______, _______, + _______, KC_BSPC, _______, KC_DEL, _______, + + _______, _______, _______ + ), + [_FN2] = LAYOUT( + _______, _______, _______, _______, + _______, _______, KC_MPLY, KC_MPRV, + _______, _______, _______, KC_MNXT, + RESET, _______, _______, _______, _______, + _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, + + _______, _______, _______ + ), + [_FN3] = LAYOUT( + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, + + _______, _______, _______ + ), + [_FN4] = LAYOUT( + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, + _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, + + _______, _______, _______ + ), + [_RGB] = LAYOUT( + _______, _______, _______, _______, + _______, _______, _______, _______, + RGB_HUD, RGB_SPI, RGB_HUI, _______, + _______, RGB_RMOD, RGB_TOG, RGB_MOD, _______, + _______, RGB_VAD, RGB_SPD, RGB_VAI, _______, + _______, RGB_SAD, _______, RGB_SAI, _______, + + _______, _______, _______ + ), +}; +#endif // !LANDSCAPE_MODE typedef struct { char keydesc[6]; // this will be displayed on OLED @@ -99,15 +166,15 @@ typedef struct { static const keycodedescType PROGMEM keyselection[] = { // list of key codes that will be scrolled through by encoder and description - {"TASK", KC_TASK}, - {"INS", KC_INS}, - {"DEL", KC_DEL}, - {"PrtSc", KC_PSCR}, + {"TASK ", KC_TASK}, + {"PREV ", KC_MEDIA_PREV_TRACK}, + {"NEXT ", KC_MEDIA_NEXT_TRACK}, + {"PLAY ", KC_MEDIA_PLAY_PAUSE}, + {"PrtScm", KC_PSCR}, {"ScrLk", KC_SCLN}, {"Break", KC_PAUS}, {"C-A-D", KC_CAD}, // Ctrl-Alt-Del {"AltF4", KC_AF4}, - {"PLAY", KC_MEDIA_PLAY_PAUSE}, {"RESET", RESET}, // firmware flash mode }; @@ -168,7 +235,7 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { #endif uint8_t mods_state = get_mods(); switch (index) { - case 0: // This is the only encoder right now, keeping for consistency + case 0: // main primary encoder switch(get_highest_layer(layer_state)){ // special handling per layer case _FN1: // on Fn layer select what the encoder does when pressed if (!mods_state) { @@ -177,6 +244,11 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { } else { // continue to default } + case _RGB: + if (!mods_state) { + encoder_action_rgb_hue(clockwise); + break; + } default: // all other layers if (mods_state & MOD_BIT(KC_RSFT) ) { // If you are holding R shift, encoder changes layers encoder_action_layerchange(clockwise); @@ -190,6 +262,17 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { break; } break; + case 1: // optional secondary encoder + switch(get_highest_layer(layer_state)){ // special handling per layer + case _RGB: + if (!mods_state) { + encoder_action_rgb_mode(clockwise); + break; + } + default: // all other layers + encoder_action_mediatrack(clockwise); // Otherwise prev/next track + break; + } } return true; } @@ -287,16 +370,19 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { void oled_task_user(void) { render_logo(); - oled_set_cursor(0,6); + oled_set_cursor(0,5); - oled_write_ln_P(PSTR("Layer"), false); + oled_write_ln_P(PSTR("-JV-"), false); + oled_write_ln_P(PSTR(" "), false); + bool showSelectedKey = false; switch (get_highest_layer(layer_state)) { case _BASE: - oled_write_ln_P(PSTR("Base"), false); + oled_write_ln_P(PSTR("BASE"), false); break; case _FN1: oled_write_ln_P(PSTR("FN 1"), false); + showSelectedKey = true; break; case _FN2: oled_write_ln_P(PSTR("FN 2"), false); @@ -311,18 +397,26 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { oled_write_ln_P(PSTR("RGB "), false); break; default: - oled_write_ln_P(PSTR("Undef"), false); + oled_write_ln_P(PSTR(" ?? "), false); } - oled_write_ln_P(PSTR(""), false); + if (showSelectedKey) oled_write_ln(selectedkey_rec.keydesc, false); + else oled_write_ln_P(PSTR(" "), false); + // Host Keyboard LED Status led_t led_state = host_keyboard_led_state(); - oled_write_ln_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false); - oled_write_ln_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false); - oled_write_ln_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false); + oled_set_cursor(0,11); + oled_write_ln_P(led_state.num_lock ? PSTR(" NUM") : PSTR(" "), false); + oled_write_ln_P(led_state.caps_lock ? PSTR(" CAP") : PSTR(" "), false); + oled_write_ln_P(led_state.scroll_lock ? PSTR(" SCR") : PSTR(" "), false); } #endif // !LANDSCAPE_MODE void suspend_power_down_user(void) { // shutdown oled when powered down to prevent OLED from showing Mercutio all the time - oled_off(); + oled_off(); + rgblight_disable_noeeprom(); + } + + void suspend_wakeup_init_user(void) { + rgblight_enable_noeeprom(); } #endif diff --git a/keyboards/mechwild/murphpad/keymaps/jonavin/readme.md b/keyboards/mechwild/murphpad/keymaps/jonavin/readme.md index 9331570636..0e389a5c37 100644 --- a/keyboards/mechwild/murphpad/keymaps/jonavin/readme.md +++ b/keyboards/mechwild/murphpad/keymaps/jonavin/readme.md @@ -8,12 +8,12 @@ This allows you to use Murphpad in a horizontal/landscape orientation with extra [_BASE] = LAYOUT_landscape( TT(_FN1), TT(_FN2), KC_MUTE, - KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, KC_PPLS, KC_BSPC, - KC_TAB, KC_P7, KC_P8, KC_P9, KC_PDOT, KC_RGUI, - KC_RSFT, KC_P4, KC_P5, KC_P6, KC_COMMA, KC_RCTL, - KC_P0, KC_P1, KC_P2, KC_P3, KC_PENT, KC_RALT, + KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, KC_PPLS, KC_BSPC, + KC_TAB, KC_P7, KC_P8, KC_P9, KC_PDOT, KC_RGUI, + KC_RSFT, KC_P4, KC_P5, KC_P6, KC_COMMA, KC_RCTL, + KC_P0, KC_P1, KC_P2, KC_P3, KC_PENT, KC_RALT, - _______, _______, _______ + _______, _______, _______ ), NOTE: VIA is enabled, but it will show it in the normal orientation until I build a landscape layout version @@ -25,16 +25,16 @@ Special Features static const keycodedescType PROGMEM keyselection[] = { // list of key codes that will be scrollled through by encoder and description - {"TASK", KC_TASK}, - {"INS", KC_INS}, - {"DEL", KC_DEL}, - {"PrtSc", KC_PSCR}, - {"ScrLk", KC_SCLN}, - {"Break", KC_PAUS}, - {"C-A-D", KC_CAD}, // Ctrl-Alt-Del - {"AltF4", KC_AF4}, - {"PLAY", KC_MEDIA_PLAY_PAUSE}, - {"RESET", RESET}, // firmware flash mode + {"TASK ", KC_TASK}, + {"PREV ", KC_MEDIA_PREV_TRACK}, + {"NEXT ", KC_MEDIA_NEXT_TRACK}, + {"PLAY ", KC_MEDIA_PLAY_PAUSE}, + {"PrtScm", KC_PSCR}, + {"ScrLk", KC_SCLN}, + {"Break", KC_PAUS}, + {"C-A-D", KC_CAD}, // Ctrl-Alt-Del + {"AltF4", KC_AF4}, + {"RESET", RESET}, // firmware flash mode }; - Additional encoder functionality @@ -49,7 +49,7 @@ rules.mk OPTIONS - Active features from userspace - STARTUP_NUMLOCK_ON = yes - turns on NUMLOCK by default -DEFAULT MAPPING +DEFAULT LANDSCAPE MAPPING ![image](https://user-images.githubusercontent.com/71780717/131718965-b20afef6-3bc5-49e4-952f-5755a9d6d539.png) @@ -59,7 +59,18 @@ FN1 Layer 1 ![image](https://user-images.githubusercontent.com/71780717/131719025-d41cbcd9-80b1-4a0a-abb5-55d878752dc6.png) +FN2 Layer 2 + +![image](https://user-images.githubusercontent.com/71780717/132967003-63268514-2ac3-4069-bca1-6d92992ca403.png) + + RGB Layer 5 - Use Shift+Encoder to get to RGB layer 5 ![image](https://user-images.githubusercontent.com/71780717/131719492-e2d05a75-3a7a-48ca-94a3-faa3ff891914.png) +-------------- + +NORMAL / TRADITIONAL NON-LANDSCAPE NUMPAD LAYOUT + +![image](https://user-images.githubusercontent.com/71780717/132966975-3b463fb4-059f-42c5-b8b3-a3d35f4a0d6b.png) + diff --git a/users/jonavin/jonavin.c b/users/jonavin/jonavin.c index 6ecadc7b47..f53aa8664e 100644 --- a/users/jonavin/jonavin.c +++ b/users/jonavin/jonavin.c @@ -160,6 +160,70 @@ along with this program. If not, see . } } } + + #ifdef RGB_MATRIX_ENABLE + void encoder_action_rgb_speed(bool clockwise) { + if (clockwise) + rgb_matrix_increase_speed_noeeprom(); + else + rgb_matrix_decrease_speed_noeeprom(); + } + void encoder_action_rgb_hue(bool clockwise) { + if (clockwise) + rgb_matrix_increase_hue_noeeprom(); + else + rgb_matrix_decrease_hue_noeeprom(); + } + void encoder_action_rgb_saturation(bool clockwise) { + if (clockwise) + rgb_matrix_increase_sat_noeeprom(); + else + rgb_matrix_decrease_sat_noeeprom(); + } + void encoder_action_rgb_brightness(bool clockwise) { + if (clockwise) + rgb_matrix_increase_val_noeeprom(); + else + rgb_matrix_decrease_val_noeeprom(); + } + void encoder_action_rgb_mode(bool clockwise) { + if (clockwise) + rgb_matrix_step_noeeprom(); + else + rgb_matrix_step_reverse_noeeprom(); + } + #elif defined(RGBLIGHT_ENABLE) + void encoder_action_rgb_speed(bool clockwise) { + if (clockwise) + rgblight_increase_speed_noeeprom(); + else + rgblight_decrease_speed_noeeprom(); + } + void encoder_action_rgb_hue(bool clockwise) { + if (clockwise) + rgblight_increase_hue_noeeprom(); + else + rgblight_decrease_hue_noeeprom(); + } + void encoder_action_rgb_saturation(bool clockwise) { + if (clockwise) + rgblight_increase_sat_noeeprom(); + else + rgblight_decrease_sat_noeeprom(); + } + void encoder_action_rgb_brightness(bool clockwise) { + if (clockwise) + rgblight_increase_val_noeeprom(); + else + rgblight_decrease_val_noeeprom(); + } + void encoder_action_rgb_mode(bool clockwise) { + if (clockwise) + rgblight_step_noeeprom(); + else + rgblight_step_reverse_noeeprom(); + } + #endif // RGB_MATRIX_ENABLE || RGBLIGHT_ENABLE #endif // ENCODER_ENABLE #if defined(ENCODER_ENABLE) && defined(ENCODER_DEFAULTACTIONS_ENABLE) // Encoder Functionality diff --git a/users/jonavin/jonavin.h b/users/jonavin/jonavin.h index 316483940a..efe0301af3 100644 --- a/users/jonavin/jonavin.h +++ b/users/jonavin/jonavin.h @@ -36,7 +36,9 @@ enum custom_user_keycodes { KC_WINLCK, //Toggles Win key on and off RGB_TOI, // Timeout idle time up RGB_TOD, // Timeout idle time down - RGB_NITE // Turns off all rgb but allow rgb indicators to work + RGB_NITE, // Turns off all rgb but allow rgb indicators to work + + NEW_SAFE_RANGE // new safe range for keymap level custom keycodes }; #define KC_CAD LALT(LCTL(KC_DEL)) @@ -67,6 +69,14 @@ enum custom_user_keycodes { uint8_t get_selected_layer(void); void encoder_action_layerchange(bool clockwise); + + #if defined(RGB_MATRIX_ENABLE) || defined(RGBLIGHT_ENABLE) + void encoder_action_rgb_speed(bool clockwise); + void encoder_action_rgb_hue(bool clockwise); + void encoder_action_rgb_saturation(bool clockwise); + void encoder_action_rgb_brightness(bool clockwise); + void encoder_action_rgb_mode(bool clockwise); + #endif // RGB_MATRIX_ENABLE / RGBLIGHT_ENABLE #endif // ENCODER_ENABLE From 03df75455126ecd395957bcbad48d19ca91fdbd5 Mon Sep 17 00:00:00 2001 From: vattern Date: Wed, 29 Sep 2021 17:55:34 +0100 Subject: [PATCH 157/595] [Keyboard] Update Grandiceps to Rev2 (#14618) Co-authored-by: Ryan Co-authored-by: Dasky <32983009+daskygit@users.noreply.github.com> Co-authored-by: Thys de Wet --- keyboards/tkw/grandiceps/config.h | 5 +--- keyboards/tkw/grandiceps/info.json | 2 +- .../tkw/grandiceps/keymaps/default/keymap.c | 22 +++++++++++++---- keyboards/tkw/grandiceps/readme.md | 14 +++++++++++ keyboards/tkw/grandiceps/rev2/config.h | 24 +++++++++++++++++++ keyboards/tkw/grandiceps/rev2/rules.mk | 5 ++++ 6 files changed, 63 insertions(+), 9 deletions(-) create mode 100644 keyboards/tkw/grandiceps/rev2/config.h create mode 100644 keyboards/tkw/grandiceps/rev2/rules.mk diff --git a/keyboards/tkw/grandiceps/config.h b/keyboards/tkw/grandiceps/config.h index 93b6fd02f1..e51c9ab223 100644 --- a/keyboards/tkw/grandiceps/config.h +++ b/keyboards/tkw/grandiceps/config.h @@ -17,19 +17,17 @@ #include "config_common.h" - /* USB Device descriptor parameter */ #define VENDOR_ID 0xFEED #define PRODUCT_ID 0x7812 #define DEVICE_VER 0x0001 +#define MANUFACTURER tkw #define PRODUCT Grandiceps Split /* key matrix size */ #define MATRIX_ROWS 10 #define MATRIX_COLS 6 - - #define MATRIX_COL_PINS { B0, A7, A3, A5, A4, A2 } #define MATRIX_ROW_PINS { B12, A6, B13, B9, B8 } #define MATRIX_COL_PINS_RIGHT { B0, A7, A3, A5, A4, A2 } @@ -61,7 +59,6 @@ /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 - /* disable these deprecated features by default */ #define NO_ACTION_MACRO #define NO_ACTION_FUNCTION diff --git a/keyboards/tkw/grandiceps/info.json b/keyboards/tkw/grandiceps/info.json index 4ca41b73af..7a4324ffdc 100644 --- a/keyboards/tkw/grandiceps/info.json +++ b/keyboards/tkw/grandiceps/info.json @@ -2,7 +2,7 @@ "keyboard_name": "grandiceps", "url": "https://github.com/vattern/grandiceps", "maintainer": "vattern", - "manufacturer": "TKW", + "manufacturer": "tkw", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/tkw/grandiceps/keymaps/default/keymap.c b/keyboards/tkw/grandiceps/keymaps/default/keymap.c index 121ae1c412..14ae9619ea 100644 --- a/keyboards/tkw/grandiceps/keymaps/default/keymap.c +++ b/keyboards/tkw/grandiceps/keymaps/default/keymap.c @@ -35,7 +35,8 @@ enum custom_keycodes { KC_NXTWD, KC_LSTRT, KC_LEND, - KC_DLINE + KC_DLINE, + KC_TEAMS }; @@ -61,7 +62,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_DEL, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_MUTE, XXXXXXX,KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_MUTE, KC_TEAMS,KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_LGUI,KC_LALT,KC_LCTRL, KC_LOWER, KC_SPC, KC_ENT, KC_RAISE, KC_RCTRL, KC_RALT, KC_RGUI ), /* @@ -103,7 +104,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_LOWER] = LAYOUT( _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_F12, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_NUBS, _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_PIPE, _______, KC_EQL, KC_MINS, KC_PLUS, KC_LCBR, KC_RCBR, _______, _______, KC_LBRC, KC_RBRC, KC_SCLN, KC_COLN, KC_BSLS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ @@ -311,6 +312,18 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { unregister_code(KC_Z); } return false; + + case KC_TEAMS: + if (record->event.pressed) { + register_mods(mod_config(MOD_LCTL)); + register_mods(mod_config(MOD_LSFT)); + register_code(KC_M); + } else { + unregister_mods(mod_config(MOD_LCTL)); + unregister_mods(mod_config(MOD_LSFT)); + unregister_code(KC_M); + } + return false; } return true; } @@ -447,7 +460,7 @@ bool encoder_update_user(uint8_t index, bool clockwise){ switch (get_highest_layer(layer_state)) { case _QWERTY: // Scrolling with PageUp and PgDn. - if (clockwise) { + if (!clockwise) { tap_code16(KC_PGDN); } else { tap_code16(KC_PGUP); @@ -462,6 +475,7 @@ bool encoder_update_user(uint8_t index, bool clockwise){ break; } } + return true; } #endif diff --git a/keyboards/tkw/grandiceps/readme.md b/keyboards/tkw/grandiceps/readme.md index 894f1c8d7a..57a6dac28d 100644 --- a/keyboards/tkw/grandiceps/readme.md +++ b/keyboards/tkw/grandiceps/readme.md @@ -8,12 +8,26 @@ ARM split keyboard with RGB underglow and encoders. * Hardware Supported: f411 blackpill * Hardware Availability: [grandiceps](https://github.com/vattern/grandiceps) +There are two versions of the Grandiceps. Please use the appropriate firmware for your board. + +* Revision 2 has I2C eeprom and support for a Pimoroni trackball. + Make example for this keyboard (after setting up your build environment): make tkw/grandiceps:default + make tkw/grandiceps/rev2:default Flashing example for this keyboard: make tkw/grandiceps:default:flash + make tkw/grandiceps/rev2:default:flash See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset buttons**: Hold down the BOOT0 button and then briefly press the NRST button on the BlackPill PCB. +* **Keycode in layout**: Press the key mapped to `RESET` if it is available diff --git a/keyboards/tkw/grandiceps/rev2/config.h b/keyboards/tkw/grandiceps/rev2/config.h new file mode 100644 index 0000000000..98b762087e --- /dev/null +++ b/keyboards/tkw/grandiceps/rev2/config.h @@ -0,0 +1,24 @@ +/* Copyright 2021 Thys de Wet + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#undef DEVICE_VER +#define DEVICE_VER 0x0002 +#undef PRODUCT +#define PRODUCT Grandiceps Split rev2 + +#define SPLIT_HAND_PIN B3 +#define EEPROM_I2C_24LC64 diff --git a/keyboards/tkw/grandiceps/rev2/rules.mk b/keyboards/tkw/grandiceps/rev2/rules.mk new file mode 100644 index 0000000000..c8f3f05bdd --- /dev/null +++ b/keyboards/tkw/grandiceps/rev2/rules.mk @@ -0,0 +1,5 @@ +EEPROM_DRIVER = i2c + +POINTING_DEVICE_ENABLE = yes +SRC += drivers/sensors/pimoroni_trackball.c +QUANTUM_LIB_SRC += i2c_master.c From 929d959ef9e2572b4744930d86e322936e6e1f0e Mon Sep 17 00:00:00 2001 From: npspears <40127181+npspears@users.noreply.github.com> Date: Wed, 29 Sep 2021 11:55:58 -0500 Subject: [PATCH 158/595] [Keyboard] add support for Quark_LP (#14552) Co-authored-by: Ryan Co-authored-by: Drashna Jaelre --- keyboards/checkerboards/quark_lp/config.h | 64 ++++++++++++ keyboards/checkerboards/quark_lp/info.json | 16 +++ .../quark_lp/keymaps/2x2u/config.h | 19 ++++ .../quark_lp/keymaps/2x2u/keymap.c | 80 +++++++++++++++ .../quark_lp/keymaps/default/config.h | 19 ++++ .../quark_lp/keymaps/default/keymap.c | 80 +++++++++++++++ .../quark_lp/keymaps/mit/config.h | 19 ++++ .../quark_lp/keymaps/mit/keymap.c | 80 +++++++++++++++ .../quark_lp/keymaps/via/config.h | 19 ++++ .../quark_lp/keymaps/via/keymap.c | 99 +++++++++++++++++++ .../quark_lp/keymaps/via/rules.mk | 1 + keyboards/checkerboards/quark_lp/quark_lp.c | 17 ++++ keyboards/checkerboards/quark_lp/quark_lp.h | 58 +++++++++++ keyboards/checkerboards/quark_lp/readme.md | 18 ++++ keyboards/checkerboards/quark_lp/rules.mk | 21 ++++ 15 files changed, 610 insertions(+) create mode 100644 keyboards/checkerboards/quark_lp/config.h create mode 100644 keyboards/checkerboards/quark_lp/info.json create mode 100644 keyboards/checkerboards/quark_lp/keymaps/2x2u/config.h create mode 100644 keyboards/checkerboards/quark_lp/keymaps/2x2u/keymap.c create mode 100644 keyboards/checkerboards/quark_lp/keymaps/default/config.h create mode 100644 keyboards/checkerboards/quark_lp/keymaps/default/keymap.c create mode 100644 keyboards/checkerboards/quark_lp/keymaps/mit/config.h create mode 100644 keyboards/checkerboards/quark_lp/keymaps/mit/keymap.c create mode 100644 keyboards/checkerboards/quark_lp/keymaps/via/config.h create mode 100644 keyboards/checkerboards/quark_lp/keymaps/via/keymap.c create mode 100644 keyboards/checkerboards/quark_lp/keymaps/via/rules.mk create mode 100644 keyboards/checkerboards/quark_lp/quark_lp.c create mode 100644 keyboards/checkerboards/quark_lp/quark_lp.h create mode 100644 keyboards/checkerboards/quark_lp/readme.md create mode 100644 keyboards/checkerboards/quark_lp/rules.mk diff --git a/keyboards/checkerboards/quark_lp/config.h b/keyboards/checkerboards/quark_lp/config.h new file mode 100644 index 0000000000..78197d33a2 --- /dev/null +++ b/keyboards/checkerboards/quark_lp/config.h @@ -0,0 +1,64 @@ +/* Copyright 2021 Nathan Spears + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x7070 +#define PRODUCT_ID 0x5354 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Nasp +#define PRODUCT QUARK_LP + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { C5, C4, C6, C7 } +#define MATRIX_COL_PINS { B6, B5, B4, B3, B0, D6, D5, D4, D3, D2, D1, D0 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +// ws2812 options +#define RGB_DI_PIN C2 // pin the DI on the ws2812 is hooked-up to +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE +#define RGBLED_NUM 14 // number of LEDs +#define RGBLIGHT_HUE_STEP 12 // units to step when in/decreasing hue +#define RGBLIGHT_SAT_STEP 12 // units to step when in/decresing saturation +#define RGBLIGHT_VAL_STEP 12 // units to step when in/decreasing value (brightness) diff --git a/keyboards/checkerboards/quark_lp/info.json b/keyboards/checkerboards/quark_lp/info.json new file mode 100644 index 0000000000..4568a4cfad --- /dev/null +++ b/keyboards/checkerboards/quark_lp/info.json @@ -0,0 +1,16 @@ +{ + "keyboard_name": "Quark_LP", + "url": "https://github.com/npspears", + "maintainer": "nasp", + "layouts": { + "LAYOUT_ortho_4x12": { + "layout": [{"label":"Tab", "x":0, "y":0}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"label":"Back Space", "x":11, "y":0}, {"label":"Esc", "x":0, "y":1}, {"label":"A", "x":1, "y":1}, {"label":"S", "x":2, "y":1}, {"label":"D", "x":3, "y":1}, {"label":"F", "x":4, "y":1}, {"label":"G", "x":5, "y":1}, {"label":"H", "x":6, "y":1}, {"label":"J", "x":7, "y":1}, {"label":"K", "x":8, "y":1}, {"label":"L", "x":9, "y":1}, {"label":";", "x":10, "y":1}, {"label":"'", "x":11, "y":1}, {"label":"Shift", "x":0, "y":2}, {"label":"Z", "x":1, "y":2}, {"label":"X", "x":2, "y":2}, {"label":"C", "x":3, "y":2}, {"label":"V", "x":4, "y":2}, {"label":"B", "x":5, "y":2}, {"label":"N", "x":6, "y":2}, {"label":"M", "x":7, "y":2}, {"label":",", "x":8, "y":2}, {"label":".", "x":9, "y":2}, {"label":"/", "x":10, "y":2}, {"label":"Return", "x":11, "y":2}, {"x":0, "y":3}, {"label":"Ctrl", "x":1, "y":3}, {"label":"Alt", "x":2, "y":3}, {"label":"Super", "x":3, "y":3}, {"label":"⇓", "x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"label":"⇑", "x":7, "y":3}, {"label":"←", "x":8, "y":3}, {"label":"↓", "x":9, "y":3}, {"label":"↑", "x":10, "y":3}, {"label":"→", "x":11, "y":3}] + }, + "LAYOUT_ortho_4x12_1x2uC": { + "layout": [{"label":"Tab", "x":0, "y":0}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"label":"Back Space", "x":11, "y":0}, {"label":"Esc", "x":0, "y":1}, {"label":"A", "x":1, "y":1}, {"label":"S", "x":2, "y":1}, {"label":"D", "x":3, "y":1}, {"label":"F", "x":4, "y":1}, {"label":"G", "x":5, "y":1}, {"label":"H", "x":6, "y":1}, {"label":"J", "x":7, "y":1}, {"label":"K", "x":8, "y":1}, {"label":"L", "x":9, "y":1}, {"label":";", "x":10, "y":1}, {"label":"'", "x":11, "y":1}, {"label":"Shift", "x":0, "y":2}, {"label":"Z", "x":1, "y":2}, {"label":"X", "x":2, "y":2}, {"label":"C", "x":3, "y":2}, {"label":"V", "x":4, "y":2}, {"label":"B", "x":5, "y":2}, {"label":"N", "x":6, "y":2}, {"label":"M", "x":7, "y":2}, {"label":",", "x":8, "y":2}, {"label":".", "x":9, "y":2}, {"label":"/", "x":10, "y":2}, {"label":"Return", "x":11, "y":2}, {"x":0, "y":3}, {"label":"Ctrl", "x":1, "y":3}, {"label":"Alt", "x":2, "y":3}, {"label":"Super", "x":3, "y":3}, {"label":"⇓", "x":4, "y":3}, {"x":5, "y":3, "w":2}, {"label":"⇑", "x":7, "y":3}, {"label":"←", "x":8, "y":3}, {"label":"↓", "x":9, "y":3}, {"label":"↑", "x":10, "y":3}, {"label":"→", "x":11, "y":3}] + }, + "LAYOUT_ortho_4x12_2x2u": { + "layout": [{"label":"Tab", "x":0, "y":0}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"label":"Back Space", "x":11, "y":0}, {"label":"Esc", "x":0, "y":1}, {"label":"A", "x":1, "y":1}, {"label":"S", "x":2, "y":1}, {"label":"D", "x":3, "y":1}, {"label":"F", "x":4, "y":1}, {"label":"G", "x":5, "y":1}, {"label":"H", "x":6, "y":1}, {"label":"J", "x":7, "y":1}, {"label":"K", "x":8, "y":1}, {"label":"L", "x":9, "y":1}, {"label":";", "x":10, "y":1}, {"label":"'", "x":11, "y":1}, {"label":"Shift", "x":0, "y":2}, {"label":"Z", "x":1, "y":2}, {"label":"X", "x":2, "y":2}, {"label":"C", "x":3, "y":2}, {"label":"V", "x":4, "y":2}, {"label":"B", "x":5, "y":2}, {"label":"N", "x":6, "y":2}, {"label":"M", "x":7, "y":2}, {"label":",", "x":8, "y":2}, {"label":".", "x":9, "y":2}, {"label":"/", "x":10, "y":2}, {"label":"Return", "x":11, "y":2}, {"x":0, "y":3}, {"label":"Ctrl", "x":1, "y":3}, {"label":"Alt", "x":2, "y":3}, {"label":"Super", "x":3, "y":3}, {"x":4, "y":3, "w":2}, {"x":6, "y":3, "w":2}, {"label":"←", "x":8, "y":3}, {"label":"↓", "x":9, "y":3}, {"label":"↑", "x":10, "y":3}, {"label":"→", "x":11, "y":3}] + } + } +} diff --git a/keyboards/checkerboards/quark_lp/keymaps/2x2u/config.h b/keyboards/checkerboards/quark_lp/keymaps/2x2u/config.h new file mode 100644 index 0000000000..b1498826ee --- /dev/null +++ b/keyboards/checkerboards/quark_lp/keymaps/2x2u/config.h @@ -0,0 +1,19 @@ +/* Copyright 2021 Nathan Spears + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#define TAPPING_TOGGLE 2 diff --git a/keyboards/checkerboards/quark_lp/keymaps/2x2u/keymap.c b/keyboards/checkerboards/quark_lp/keymaps/2x2u/keymap.c new file mode 100644 index 0000000000..8c09b3a58e --- /dev/null +++ b/keyboards/checkerboards/quark_lp/keymaps/2x2u/keymap.c @@ -0,0 +1,80 @@ +/* Copyright 2021 Nathan Spears + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +// Defines for task manager and such +#define CALTDEL LCTL(LALT(KC_DEL)) +#define TSKMGR LCTL(LSFT(KC_ESC)) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* [0] + * ,-----------------------------------------------------------------------------------------. + * |------------+------+------+------+------+------+------+------+------+------+------+------| + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Del | + * |------------+------+------+------+------+-------------+------+------+------+------+------| + * | CTL & ESC | A | S | D | F | G | H | J | K | L | ; | " | + * |------------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift | Z | X | C | V | B | N | M | , | . | / |Enter | + * |-------+-------+-------+-------+-------+-------+------+------+------+------+------+------| + * | PRINT | OS | Alt | Layer | Space & Layer | [ | ] | CAPS | + * `-----------------------------------------------------------------------------------------' + */ + [0] = LAYOUT_ortho_4x12_2x2u( + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, + CTL_T(KC_ESC), KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, + KC_CAPS, KC_GRV, KC_LGUI, KC_LALT, TT(1), LT(2, KC_SPC), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT + ), + + /* [1] + * ,---------------------------------------------------------------------------------------. + * |------------+------+------+------+------+------+------+------+------+------+------+----| + * | ~ | ! | @ | # | $ | % | | ^ | & | * | ( | ) | BCKSPC | + * |------------+------+------+------+------+-------------+------+------+------+------+----| + * | \ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | / | + * |------------+------+------+------+------+------|------+------+------+------+------+----| + * | | | | | | | | + | = | | | | + * |-------+-------+-------+-------+-------+-------+------+------+------+------+------+----| + * | ESC | CTRL-ALT-DEL | TASK | | | '|' | ` | | + * `---------------------------------------------------------------------------------------' + */ + [1] = LAYOUT_ortho_4x12_2x2u( + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, + KC_SLSH, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSLS, + _______, _______, _______, _______, _______, _______, _______, KC_PPLS, KC_EQL, _______, _______, _______, + KC_ESC, CALTDEL, TSKMGR, _______, _______, _______, _______, KC_NUBS, KC_GRV, _______ + ), + + /* [2] + * ,---------------------------------------------------------------------------------------. + * |------------+------+------+------+------+------+------+------+------+------+------+---| + * | | | | UP | | | | _ | | [ | ] | | + * |------------+------+------+------+------+-------------+------+------+------+------+---| + * | | | LEFT | DOWN | RIGHT | | | - | | [ | ] | | + * |------------+------+------+------+------+-----+-----+------+------+------+------+-----| + * | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | + * |-------+-------+-------+-------+-------+-------+------+------+------+------+------+---| + * | RESET | | | | | | | | + * `---------------------------------------------------------------------------------------' + */ + [2] = LAYOUT_ortho_4x12_2x2u( + _______, _______, _______, KC_UP, _______, _______, _______, KC_UNDS, _______, KC_LBRC, KC_RBRC, _______, + _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, KC_MINS, _______, KC_LCBR, KC_RCBR, _______, + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/checkerboards/quark_lp/keymaps/default/config.h b/keyboards/checkerboards/quark_lp/keymaps/default/config.h new file mode 100644 index 0000000000..b1498826ee --- /dev/null +++ b/keyboards/checkerboards/quark_lp/keymaps/default/config.h @@ -0,0 +1,19 @@ +/* Copyright 2021 Nathan Spears + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#define TAPPING_TOGGLE 2 diff --git a/keyboards/checkerboards/quark_lp/keymaps/default/keymap.c b/keyboards/checkerboards/quark_lp/keymaps/default/keymap.c new file mode 100644 index 0000000000..22e589d8a6 --- /dev/null +++ b/keyboards/checkerboards/quark_lp/keymaps/default/keymap.c @@ -0,0 +1,80 @@ +/* Copyright 2021 Nathan Spears + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +// Defines for task manager and such +#define CALTDEL LCTL(LALT(KC_DEL)) +#define TSKMGR LCTL(LSFT(KC_ESC)) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* [0] + * ,-----------------------------------------------------------------------------------------. + * |------------+------+------+------+------+------+------+------+------+------+------+------| + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Del | + * |------------+------+------+------+------+-------------+------+------+------+------+------| + * | CTL & ESC | A | S | D | F | G | H | J | K | L | ; | " | + * |------------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift | Z | X | C | V | B | N | M | , | . | / |Enter | + * |-------+-------+-------+-------+-------+-------+------+------+------+------+------+------| + * | PRINT | OS | Alt | Layer | Space & Layer | [ | ] | CAPS | + * `-----------------------------------------------------------------------------------------' + */ + [0] = LAYOUT_ortho_4x12( + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, + CTL_T(KC_ESC), KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, + KC_PSCR, KC_LCTL, KC_LALT, KC_LGUI, TT(1), KC_SPC, KC_SPC, TT(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT + ), + + /* [1] + * ,---------------------------------------------------------------------------------------. + * |------------+------+------+------+------+------+------+------+------+------+------+----| + * | ~ | ! | @ | # | $ | % | | ^ | & | * | ( | ) | BCKSPC | + * |------------+------+------+------+------+-------------+------+------+------+------+----| + * | \ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | / | + * |------------+------+------+------+------+------|------+------+------+------+------+----| + * | | | | | | | | + | = | | | | + * |-------+-------+-------+-------+-------+-------+------+------+------+------+------+----| + * | ESC | CTRL-ALT-DEL | TASK | | | '|' | ` | | + * `---------------------------------------------------------------------------------------' + */ + [1] = LAYOUT_ortho_4x12( + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, + KC_SLSH, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSLS, + _______, _______, _______, _______, _______, _______, _______, KC_PPLS, KC_EQL, _______, _______, _______, + _______, KC_ESC, CALTDEL, TSKMGR, _______, _______, _______, _______, _______, KC_NUBS, KC_GRV, _______ + ), + + /* [2] + * ,---------------------------------------------------------------------------------------. + * |------------+------+------+------+------+------+------+------+------+------+------+---| + * | | | | UP | | | | _ | | [ | ] | | + * |------------+------+------+------+------+-------------+------+------+------+------+---| + * | | | LEFT | DOWN | RIGHT | | | - | | [ | ] | | + * |------------+------+------+------+------+-----+-----+------+------+------+------+-----| + * | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | + * |-------+-------+-------+-------+-------+-------+------+------+------+------+------+---| + * | RESET | | | | | | | | + * `---------------------------------------------------------------------------------------' + */ + [2] = LAYOUT_ortho_4x12( + _______, _______, _______, KC_UP, _______, _______, _______, KC_UNDS, _______, KC_LBRC, KC_RBRC, _______, + _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, KC_MINS, _______, KC_LCBR, KC_RCBR, _______, + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/checkerboards/quark_lp/keymaps/mit/config.h b/keyboards/checkerboards/quark_lp/keymaps/mit/config.h new file mode 100644 index 0000000000..b1498826ee --- /dev/null +++ b/keyboards/checkerboards/quark_lp/keymaps/mit/config.h @@ -0,0 +1,19 @@ +/* Copyright 2021 Nathan Spears + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#define TAPPING_TOGGLE 2 diff --git a/keyboards/checkerboards/quark_lp/keymaps/mit/keymap.c b/keyboards/checkerboards/quark_lp/keymaps/mit/keymap.c new file mode 100644 index 0000000000..f747f4f26b --- /dev/null +++ b/keyboards/checkerboards/quark_lp/keymaps/mit/keymap.c @@ -0,0 +1,80 @@ +/* Copyright 2021 Nathan Spears + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +// Defines for task manager and such +#define CALTDEL LCTL(LALT(KC_DEL)) +#define TSKMGR LCTL(LSFT(KC_ESC)) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* [0] + * ,-----------------------------------------------------------------------------------------. + * |------------+------+------+------+------+------+------+------+------+------+------+------| + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Del | + * |------------+------+------+------+------+-------------+------+------+------+------+------| + * | CTL & ESC | A | S | D | F | G | H | J | K | L | ; | " | + * |------------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift | Z | X | C | V | B | N | M | , | . | / |Enter | + * |-------+-------+-------+-------+-------+-------+------+------+------+------+------+------| + * | PRINT | OS | Alt | Layer | Space & Layer | [ | ] | CAPS | + * `-----------------------------------------------------------------------------------------' + */ + [0] = LAYOUT_ortho_4x12_1x2uC( + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, + CTL_T(KC_ESC), KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, + KC_PSCR, KC_LCTL, KC_LALT, KC_LGUI, TT(1), KC_SPC, TT(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT + ), + + /* [1] + * ,---------------------------------------------------------------------------------------. + * |------------+------+------+------+------+------+------+------+------+------+------+----| + * | ~ | ! | @ | # | $ | % | | ^ | & | * | ( | ) | BCKSPC | + * |------------+------+------+------+------+-------------+------+------+------+------+----| + * | \ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | / | + * |------------+------+------+------+------+------|------+------+------+------+------+----| + * | | | | | | | | + | = | | | | + * |-------+-------+-------+-------+-------+-------+------+------+------+------+------+----| + * | ESC | CTRL-ALT-DEL | TASK | | | '|' | ` | | + * `---------------------------------------------------------------------------------------' + */ + [1] = LAYOUT_ortho_4x12_1x2uC( + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, + KC_SLSH, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSLS, + _______, _______, _______, _______, _______, _______, _______, KC_PPLS, KC_EQL, _______, _______, _______, + _______, KC_ESC, CALTDEL, TSKMGR, _______, _______, _______, _______, KC_NUBS, KC_GRV, _______ + ), + + /* [2] + * ,---------------------------------------------------------------------------------------. + * |------------+------+------+------+------+------+------+------+------+------+------+---| + * | | | | UP | | | | _ | | [ | ] | | + * |------------+------+------+------+------+-------------+------+------+------+------+---| + * | | | LEFT | DOWN | RIGHT | | | - | | [ | ] | | + * |------------+------+------+------+------+-----+-----+------+------+------+------+-----| + * | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | + * |-------+-------+-------+-------+-------+-------+------+------+------+------+------+---| + * | RESET | | | | | | | | + * `---------------------------------------------------------------------------------------' + */ + [2] = LAYOUT_ortho_4x12_1x2uC( + _______, _______, _______, KC_UP, _______, _______, _______, KC_UNDS, _______, KC_LBRC, KC_RBRC, _______, + _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, KC_MINS, _______, KC_LCBR, KC_RCBR, _______, + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/checkerboards/quark_lp/keymaps/via/config.h b/keyboards/checkerboards/quark_lp/keymaps/via/config.h new file mode 100644 index 0000000000..b1498826ee --- /dev/null +++ b/keyboards/checkerboards/quark_lp/keymaps/via/config.h @@ -0,0 +1,19 @@ +/* Copyright 2021 Nathan Spears + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#define TAPPING_TOGGLE 2 diff --git a/keyboards/checkerboards/quark_lp/keymaps/via/keymap.c b/keyboards/checkerboards/quark_lp/keymaps/via/keymap.c new file mode 100644 index 0000000000..d7e281730a --- /dev/null +++ b/keyboards/checkerboards/quark_lp/keymaps/via/keymap.c @@ -0,0 +1,99 @@ +/* Copyright 2021 Nathan Spears + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +// Defines for task manager and such +#define CALTDEL LCTL(LALT(KC_DEL)) +#define TSKMGR LCTL(LSFT(KC_ESC)) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* [0] + * ,-----------------------------------------------------------------------------------------. + * |------------+------+------+------+------+------+------+------+------+------+------+------| + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Del | + * |------------+------+------+------+------+-------------+------+------+------+------+------| + * | CTL & ESC | A | S | D | F | G | H | J | K | L | ; | " | + * |------------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift | Z | X | C | V | B | N | M | , | . | / |Enter | + * |-------+-------+-------+-------+-------+-------+------+------+------+------+------+------| + * | PRINT | OS | Alt | Layer | Space & Layer | [ | ] | CAPS | + * `-----------------------------------------------------------------------------------------' + */ + [0] = LAYOUT_ortho_4x12( + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, + CTL_T(KC_ESC), KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, + KC_PSCR, KC_LCTL, KC_LALT, KC_LGUI, TT(1), KC_SPC, KC_SPC, TT(2), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT + ), + + /* [1] + * ,---------------------------------------------------------------------------------------. + * |------------+------+------+------+------+------+------+------+------+------+------+----| + * | ~ | ! | @ | # | $ | % | | ^ | & | * | ( | ) | BCKSPC | + * |------------+------+------+------+------+-------------+------+------+------+------+----| + * | \ | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | / | + * |------------+------+------+------+------+------|------+------+------+------+------+----| + * | | | | | | | | + | = | | | | + * |-------+-------+-------+-------+-------+-------+------+------+------+------+------+----| + * | ESC | CTRL-ALT-DEL | TASK | | | '|' | ` | | + * `---------------------------------------------------------------------------------------' + */ + [1] = LAYOUT_ortho_4x12( + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, + KC_SLSH, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSLS, + _______, _______, _______, _______, _______, _______, _______, KC_PPLS, KC_EQL, _______, _______, _______, + _______, KC_ESC, CALTDEL, TSKMGR, _______, _______, _______, _______, _______, KC_NUBS, KC_GRV, _______ + ), + + /* [2] + * ,---------------------------------------------------------------------------------------. + * |------------+------+------+------+------+------+------+------+------+------+------+---| + * | | | | UP | | | | _ | | [ | ] | | + * |------------+------+------+------+------+-------------+------+------+------+------+---| + * | | | LEFT | DOWN | RIGHT | | | - | | [ | ] | | + * |------------+------+------+------+------+-----+-----+------+------+------+------+-----| + * | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | + * |-------+-------+-------+-------+-------+-------+------+------+------+------+------+---| + * | RESET | | | | | | | | + * `---------------------------------------------------------------------------------------' + */ + [2] = LAYOUT_ortho_4x12( + _______, _______, _______, KC_UP, _______, _______, _______, KC_UNDS, _______, KC_LBRC, KC_RBRC, _______, + _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, KC_MINS, _______, KC_LCBR, KC_RCBR, _______, + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + /* [3] + * ,---------------------------------------------------------------------------------------. + * |------------+------+------+------+------+------+------+------+------+------+------+---| + * | | | | UP | | | | _ | | [ | ] | | + * |------------+------+------+------+------+-------------+------+------+------+------+---| + * | | | LEFT | DOWN | RIGHT | | | - | | [ | ] | | + * |------------+------+------+------+------+-----+-----+------+------+------+------+-----| + * | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | + * |-------+-------+-------+-------+-------+-------+------+------+------+------+------+---| + * | RESET | | | | | | | | + * `---------------------------------------------------------------------------------------' + */ +[3] = LAYOUT_ortho_4x12( + _______, _______, _______, KC_UP, _______, _______, _______, KC_UNDS, _______, KC_LBRC, KC_RBRC, _______, + _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, KC_MINS, _______, KC_LCBR, KC_RCBR, _______, + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) + }; diff --git a/keyboards/checkerboards/quark_lp/keymaps/via/rules.mk b/keyboards/checkerboards/quark_lp/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/checkerboards/quark_lp/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/checkerboards/quark_lp/quark_lp.c b/keyboards/checkerboards/quark_lp/quark_lp.c new file mode 100644 index 0000000000..bc9a192bf5 --- /dev/null +++ b/keyboards/checkerboards/quark_lp/quark_lp.c @@ -0,0 +1,17 @@ +/* Copyright 2021 Nathan Spears + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "quark_lp.h" diff --git a/keyboards/checkerboards/quark_lp/quark_lp.h b/keyboards/checkerboards/quark_lp/quark_lp.h new file mode 100644 index 0000000000..a7bb3fda8b --- /dev/null +++ b/keyboards/checkerboards/quark_lp/quark_lp.h @@ -0,0 +1,58 @@ +/* Copyright 2021 Nathan Spears + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +#define XXX KC_NO + + +#define LAYOUT_ortho_4x12( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B } \ +} + +#define LAYOUT_ortho_4x12_1x2uC( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, \ + k30, k31, k32, k33, k34, k35, k37, k38, k39, k3A, k3B \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B }, \ + { k30, k31, k32, k33, k34, k35, XXX, k37, k38, k39, k3A, k3B } \ +} + +#define LAYOUT_ortho_4x12_2x2u( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, \ + k30, k31, k32, k33, k34, k36, k38, k39, k3A, k3B \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B }, \ + { k30, k31, k32, k33, k34, XXX, k36, XXX, k38, k39, k3A, k3B } \ +} diff --git a/keyboards/checkerboards/quark_lp/readme.md b/keyboards/checkerboards/quark_lp/readme.md new file mode 100644 index 0000000000..427f1081cf --- /dev/null +++ b/keyboards/checkerboards/quark_lp/readme.md @@ -0,0 +1,18 @@ +# Quark_LP + +![Quark_LP](https://i.imgur.com/EgdbzxE.png) + +The Quark LP PCB is compatible with Cherry Low-Profile switches and Kailh Choc switches, and is drop-in compatible with the OLKB Planck board. + +* Keyboard Maintainer: [Nasp](https://github.com/npspears) +* Hardware Supported: Planck +* Hardware Availability: www.checkerboards.xyz + +Make example for this keyboard (after setting up your build environment): + + make checkerboards/quark_lp:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader +Enter the bootloader by pressing the reset pin on the back of the PCB. You can do this through the back of the case through the small hole near the USB connector. diff --git a/keyboards/checkerboards/quark_lp/rules.mk b/keyboards/checkerboards/quark_lp/rules.mk new file mode 100644 index 0000000000..9906266f48 --- /dev/null +++ b/keyboards/checkerboards/quark_lp/rules.mk @@ -0,0 +1,21 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output From 1e54796f0cf469e2c1fdd880cc288b04e7b83985 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Wed, 29 Sep 2021 11:16:11 -0700 Subject: [PATCH 159/595] [Keymap] Update to Drashna Code (#14644) --- .../community/split_3x6_3/drashna/keymap.c | 141 +++++++++++++++++- users/drashna/drashna.c | 11 +- users/drashna/oled_stuff.c | 20 ++- users/drashna/rules.mk | 16 +- users/drashna/transport_sync.c | 33 +--- users/drashna/transport_sync.h | 10 ++ 6 files changed, 180 insertions(+), 51 deletions(-) diff --git a/layouts/community/split_3x6_3/drashna/keymap.c b/layouts/community/split_3x6_3/drashna/keymap.c index 707dd3646b..a3145a4044 100644 --- a/layouts/community/split_3x6_3/drashna/keymap.c +++ b/layouts/community/split_3x6_3/drashna/keymap.c @@ -97,6 +97,143 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { #ifdef OLED_ENABLE oled_rotation_t oled_init_keymap(oled_rotation_t rotation) { return OLED_ROTATION_270; } + +# ifdef CONVERT_TO_PROTON_C +// WPM-responsive animation stuff here +# define SLEEP_FRAMES 2 +# define SLEEP_SPEED 10 // below this wpm value your animation will idle + +# define WAKE_FRAMES 2 // uncomment if >1 + +# define KAKI_FRAMES 3 +# define KAKI_SPEED 40 // above this wpm value typing animation to triggere + +# define RTOGI_FRAMES 2 +//#define LTOGI_FRAMES 2 + +//#define ANIM_FRAME_DURATION 500 // how long each frame lasts in ms +// #define SLEEP_TIMER 60000 // should sleep after this period of 0 wpm, needs fixing +# define ANIM_SIZE 512 // number of bytes in array, minimize for adequate firmware size, max is 1024 + +uint32_t anim_timer = 0; +uint32_t anim_frame_duration = 500; +uint8_t current_sleep_frame = 0; +uint8_t current_wake_frame = 0; // uncomment if WAKE_FRAMES >1 +uint8_t current_kaki_frame = 0; +uint8_t current_rtogi_frame = 0; +// uint8_t current_ltogi_frame = 0; +// clang-format off +void render_kitty(void) { + // Images credit j-inc(/James Incandenza) and pixelbenny. Credit to obosob for initial animation approach. + static const char PROGMEM sleep[SLEEP_FRAMES][ANIM_SIZE] = {{ + // 'sleep1', 32x32px + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x08, 0xa8, 0x48, 0xa8, 0x18, 0x08, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x03, 0x02, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00, 0x80, 0x44, 0x84, 0x06, 0x05, 0x04, 0x80, 0x40, 0x20, 0x10, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x20, 0x18, 0x04, 0x04, 0x02, 0x7a, 0x86, 0x01, 0x80, 0x80, 0x01, 0x03, 0x05, 0x07, 0x01, 0x00, 0x00, 0x80, 0x83, 0x45, 0xfa, 0x3c, 0xe0, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x08, 0x10, 0x10, 0x10, 0x10, 0x10, 0x33, 0x24, 0x28, 0x28, 0x29, 0x29, 0x29, 0x3a, 0x18, 0x1c, 0x39, 0x24, 0x24, 0x3a, 0x2d, 0x26, 0x31, 0x1f, 0x00, + }, + {// 'sleep2', 32x32px + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x22, 0x22, 0x3a, 0x2a, 0x26, 0x22, 0x80, 0xc0, 0x80, 0x00, 0x24, 0x34, 0x2c, 0xe4, 0x60, 0x10, 0x70, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x38, 0x04, 0x02, 0x02, 0x01, 0x79, 0x87, 0x01, 0x80, 0x81, 0x83, 0x05, 0x05, 0x03, 0x01, 0x00, 0x00, 0x80, 0x43, 0x05, 0xfa, 0x3c, 0xe0, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x08, 0x10, 0x10, 0x10, 0x10, 0x10, 0x33, 0x24, 0x28, 0x28, 0x28, 0x29, 0x29, 0x3a, 0x18, 0x1c, 0x39, 0x24, 0x24, 0x3a, 0x2d, 0x26, 0x31, 0x1f, 0x00 + }}; + static const char PROGMEM wake[WAKE_FRAMES][ANIM_SIZE] = {{ + // 'mati2', 32x32px + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x30, 0x08, 0x10, 0x60, 0x80, 0x00, 0x80, 0x60, 0x10, 0x08, 0x30, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0x80, 0x40, 0x40, 0x5c, 0x00, 0x01, 0x41, 0x01, 0x00, 0x5c, 0x40, 0x40, 0x80, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x40, 0x40, 0x80, 0xe1, 0x12, 0x0a, 0x06, 0x00, 0x80, 0x00, 0x06, 0x0a, 0x12, 0xe1, 0x80, 0x40, 0x40, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x1f, 0x14, 0x14, 0x10, 0x10, 0x11, 0x1f, 0x10, 0x10, 0x18, 0x0f, 0x18, 0x10, 0x10, 0x1f, 0x11, 0x10, 0x10, 0x14, 0x14, 0x1f, 0x1c, 0x14, 0x14, 0x14, 0x08 + }, + {// 'mati3', 32x32px + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x30, 0x08, 0x10, 0x60, 0x80, 0x00, 0x80, 0x60, 0x10, 0x08, 0x30, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7f, 0x90, 0x12, 0x0a, 0x02, 0xf4, 0x09, 0x0d, 0xf1, 0x04, 0x02, 0x0a, 0x12, 0x90, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x40, 0x40, 0x80, 0xe1, 0x12, 0x0a, 0x06, 0x01, 0x81, 0x00, 0x06, 0x0a, 0x12, 0xe1, 0x80, 0x40, 0x40, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x1f, 0x14, 0x14, 0x10, 0x10, 0x11, 0x1f, 0x10, 0x10, 0x18, 0x0f, 0x18, 0x10, 0x10, 0x1f, 0x11, 0x10, 0x10, 0x14, 0x14, 0x1f, 0x1c, 0x14, 0x14, 0x14, 0x08 + }}; + static const char PROGMEM kaki[KAKI_FRAMES][ANIM_SIZE] = {{ + // 'jare2', 32x32px + 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x40, 0x40, 0x80, 0x80, 0x80, 0x00, 0xfc, 0x84, 0x08, 0x08, 0x10, 0x20, 0x40, 0x40, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x1e, 0x60, 0x80, 0x00, 0x00, 0x91, 0xa1, 0x80, 0x00, 0x00, 0x22, 0x84, 0x40, 0x50, 0x48, 0xc1, 0x3e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x40, 0x41, 0x82, 0xe2, 0x12, 0x0a, 0x06, 0x00, 0x80, 0x88, 0x4f, 0x02, 0x22, 0xe2, 0x9f, 0x40, 0x40, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x1f, 0x14, 0x14, 0x10, 0x10, 0x11, 0x1f, 0x10, 0x10, 0x18, 0x0f, 0x18, 0x14, 0x10, 0x10, 0x10, 0x10, 0x10, 0x14, 0x14, 0x1f, 0x1a, 0x0a, 0x0a, 0x04, 0x00 + }, + { + // 'kaki1', 32x32px + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xf0, 0x10, 0x20, 0x20, 0x40, 0x40, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x06, 0x1a, 0x22, 0xc2, 0x04, 0x04, 0x04, 0x07, 0x00, 0xc0, 0x20, 0x10, 0x80, 0x80, 0x01, 0x01, 0x02, 0xfc, 0xfe, 0x02, 0x3c, 0x20, 0x40, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x0d, 0x8d, 0x55, 0x50, 0x94, 0xf0, 0x10, 0x09, 0x08, 0x00, 0x80, 0x00, 0x06, 0x09, 0x1b, 0xee, 0x00, 0x00, 0x00, 0x00, 0x81, 0xfe, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x1f, 0x14, 0x14, 0x10, 0x10, 0x11, 0x1f, 0x10, 0x10, 0x18, 0x0f, 0x18, 0x10, 0x10, 0x1f, 0x19, 0x18, 0x1c, 0x14, 0x16, 0x15, 0x14, 0x14, 0x14, 0x14, 0x08 + }, + {// 'kaki2', 32x32px + 0x00, 0x00, 0x00, 0x00, 0x80, 0x40, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x10, 0x20, 0x40, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x0f, 0xf0, 0x00, 0x01, 0x02, 0x04, 0x04, 0x03, 0x80, 0x40, 0x40, 0x20, 0x00, 0x01, 0x02, 0x8c, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x0d, 0x8d, 0x55, 0x50, 0x94, 0xf0, 0x10, 0x0a, 0x0e, 0x1d, 0x95, 0x24, 0x24, 0x27, 0x13, 0xe1, 0x01, 0x01, 0x01, 0x01, 0x02, 0xfc, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x1f, 0x14, 0x14, 0x10, 0x10, 0x11, 0x1f, 0x10, 0x10, 0x18, 0x0f, 0x18, 0x10, 0x10, 0x1f, 0x19, 0x18, 0x1c, 0x14, 0x14, 0x17, 0x14, 0x14, 0x14, 0x14, 0x08, + }}; + static const char PROGMEM rtogi[KAKI_FRAMES][ANIM_SIZE] = {{ + // 'rtogi1', 32x32px + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x20, 0x10, 0x10, 0x08, 0x04, 0x02, 0x01, 0x0f, 0x90, 0x10, 0x20, 0xf0, 0xf8, 0xf8, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x40, 0x20, 0x10, 0x10, 0x08, 0x08, 0x08, 0x08, 0x48, 0x47, 0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x88, 0xc7, 0xc4, 0x62, 0x23, 0x11, 0x3f, + 0x80, 0x40, 0x20, 0x10, 0x88, 0xcc, 0x43, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xc0, 0x80, 0x80, 0xc0, 0xe1, 0xfe, 0xb8, 0x88, 0x0c, 0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x06, 0x04, 0x04, 0x04, 0x04, 0x05, 0x04, 0x04, 0x04, 0x07, 0x07, 0x07, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 + }, + {// 'rtogi2', 32x32px + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0x20, 0x10, 0x10, 0x08, 0x04, 0x02, 0x01, 0x1f, 0xa0, 0x20, 0x40, 0x80, 0x00, 0xf0, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x40, 0x20, 0x10, 0x10, 0x08, 0x08, 0x08, 0x08, 0x48, 0x47, 0x88, 0x00, 0x00, 0x00, 0x00, 0x24, 0x24, 0x28, 0x6b, 0x40, 0xa0, 0x99, 0x86, 0xff, + 0x0f, 0x11, 0x22, 0x44, 0x48, 0x4c, 0x43, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xc0, 0x80, 0x80, 0xc0, 0xe1, 0xfe, 0xb8, 0x88, 0x0c, 0x04, 0x06, 0x06, 0x06, 0x0e, 0x0e, 0x06, 0x01, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x06, 0x04, 0x04, 0x04, 0x04, 0x05, 0x04, 0x04, 0x04, 0x07, 0x07, 0x07, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 + }}; + + // assumes 1 frame prep stage + extern bool swap_hands; + void animation_phase(void) { + if (swap_hands) { + anim_frame_duration = 300; + current_rtogi_frame = (current_rtogi_frame + 1) % RTOGI_FRAMES; + oled_write_raw_P(rtogi[abs((RTOGI_FRAMES - 1) - current_rtogi_frame)], ANIM_SIZE); + } else { + if (get_current_wpm() <= SLEEP_SPEED) { + anim_frame_duration = 500; + current_sleep_frame = (current_sleep_frame + 1) % SLEEP_FRAMES; + oled_write_raw_P(sleep[abs((SLEEP_FRAMES - 1) - current_sleep_frame)], ANIM_SIZE); + } + // if(get_current_wpm() >IDLE_SPEED && get_current_wpm() SLEEP_SPEED) { + anim_frame_duration = 800; + current_wake_frame = (current_wake_frame + 1) % WAKE_FRAMES; + oled_write_raw_P(wake[abs((WAKE_FRAMES - 1) - current_wake_frame)], ANIM_SIZE); + // oled_write_raw_P(wake[0], ANIM_SIZE); // remove if IDLE_FRAMES >1 + } + if (get_current_wpm() >= KAKI_SPEED) { + anim_frame_duration = 500; + current_kaki_frame = (current_kaki_frame + 1) % KAKI_FRAMES; + oled_write_raw_P(kaki[abs((KAKI_FRAMES - 1) - current_kaki_frame)], ANIM_SIZE); + } + } + } + if (get_current_wpm() != 000) { + // if(timer_elapsed32(anim_timer) > ANIM_FRAME_DURATION) { + if (timer_elapsed32(anim_timer) > anim_frame_duration) { + anim_timer = timer_read32(); + animation_phase(); + } + } else { + // if(timer_elapsed32(anim_timer) > ANIM_FRAME_DURATION) { + if (timer_elapsed32(anim_timer) > anim_frame_duration) { + anim_timer = timer_read32(); + animation_phase(); + } + } +} + +void oled_driver_render_logo_right(void) { + render_kitty(); + + oled_set_cursor(0, 4); + render_default_layer_state(); +} +# endif #endif #ifdef TAPPING_TERM_PER_KEY @@ -111,10 +248,6 @@ uint16_t get_tapping_term(uint16_t keycode, keyrecord_t *record) { #endif #ifdef RGB_MATRIX_ENABLE -void suspend_power_down_keymap(void) { rgb_matrix_set_suspend_state(true); } - -void suspend_wakeup_init_keymap(void) { rgb_matrix_set_suspend_state(false); } - void check_default_layer(uint8_t mode, uint8_t type, uint8_t led_min, uint8_t led_max) { switch (get_highest_layer(default_layer_state)) { case _QWERTY: diff --git a/users/drashna/drashna.c b/users/drashna/drashna.c index 3423e379a1..871136c137 100644 --- a/users/drashna/drashna.c +++ b/users/drashna/drashna.c @@ -73,11 +73,6 @@ void matrix_init_user(void) { matrix_init_secret(); matrix_init_keymap(); -#if defined(AUDIO_ENABLE) && defined(SPLIT_KEYBOARD) - if (!is_keyboard_master()) { - stop_all_notes(); - } -#endif } __attribute__((weak)) void keyboard_post_init_keymap(void) {} @@ -227,16 +222,15 @@ bool hasAllBitsInMask(uint8_t value, uint8_t mask) { } #ifdef SPLIT_KEYBOARD -# if defined(AUDIO_ENABLE) -bool delayed_tasks_run = false; -# endif __attribute__((weak)) void matrix_slave_scan_keymap(void) {} void matrix_slave_scan_user(void) { # if defined(AUDIO_ENABLE) # if !defined(NO_MUSIC_MODE) music_task(); # endif +# ifdef AUDIO_INIT_DELAY if (!is_keyboard_master()) { + static bool delayed_tasks_run = false; static uint16_t delayed_task_timer = 0; if (!delayed_tasks_run) { if (!delayed_task_timer) { @@ -247,6 +241,7 @@ void matrix_slave_scan_user(void) { } } } +# endif # endif # ifdef SEQUENCER_ENABLE sequencer_task(); diff --git a/users/drashna/oled_stuff.c b/users/drashna/oled_stuff.c index 0bdd0212be..7811cabc60 100644 --- a/users/drashna/oled_stuff.c +++ b/users/drashna/oled_stuff.c @@ -62,6 +62,9 @@ void add_keylog(uint16_t keycode, keyrecord_t *record) { return; } } + if (keycode > 0xFF) { + return; + } for (uint8_t i = 1; i < KEYLOGGER_LENGTH; i++) { keylog_str[i - 1] = keylog_str[i]; @@ -250,6 +253,17 @@ extern bool tap_toggling; #endif void render_user_status(void) { +#ifdef AUDIO_ENABLE + bool is_audio_on = false, is_clicky_on = false; +# ifdef SPLIT_KEYBOARD + + is_audio_on = user_state.audio_enable; + is_clicky_on = user_state.audio_clicky_enable; +# else + is_audio_on = is_audio_on(); + is_clicky_on = is_clicky_on(); +# endif +#endif oled_write_P(PSTR(OLED_RENDER_USER_NAME), false); #if !defined(OLED_DISPLAY_128X64) oled_write_P(PSTR(" "), false); @@ -265,11 +279,11 @@ void render_user_status(void) { #endif #ifdef AUDIO_ENABLE static const char PROGMEM audio_status[2][3] = {{0xE0, 0xE1, 0}, {0xE2, 0xE3, 0}}; - oled_write_P(audio_status[is_audio_on()], false); + oled_write_P(audio_status[is_audio_on], false); # ifdef AUDIO_CLICKY static const char PROGMEM audio_clicky_status[2][3] = {{0xF4, 0xF5, 0}, {0xF6, 0xF7, 0}}; - oled_write_P(audio_clicky_status[is_clicky_on() && is_audio_on()], false); + oled_write_P(audio_clicky_status[is_clicky_on && is_audio_on], false); # if !defined(OLED_DISPLAY_128X64) oled_write_P(PSTR(" "), false); # endif @@ -370,7 +384,7 @@ void render_status_secondary(void) { /* Show Keyboard Layout */ render_layer_state(); render_mod_status(get_mods() | get_oneshot_mods()); -#if !defined(OLED_DISPLAY_128X64) && defined(WPM_ENABLE) +#if !defined(OLED_DISPLAY_128X64) && defined(WPM_ENABLE) && !defined(CONVERT_TO_PROTON_C) render_wpm(2); #endif // render_keylock_status(host_keyboard_leds()); diff --git a/users/drashna/rules.mk b/users/drashna/rules.mk index dbacae1d56..e9911979c7 100644 --- a/users/drashna/rules.mk +++ b/users/drashna/rules.mk @@ -1,5 +1,5 @@ -SRC += drashna.c \ - process_records.c +SRC += $(USER_PATH)/drashna.c \ + $(USER_PATH)/process_records.c ifneq ($(PLATFORM),CHIBIOS) ifneq ($(strip $(LTO_SUPPORTED)), no) @@ -11,7 +11,7 @@ GRAVE_ESC_ENABLE = no ifneq ($(strip $(NO_SECRETS)), yes) ifneq ("$(wildcard $(USER_PATH)/secrets.c)","") - SRC += secrets.c + SRC += $(USER_PATH)/secrets.c endif ifeq ($(strip $(NO_SECRETS)), lite) OPT_DEFS += -DNO_SECRETS @@ -21,14 +21,14 @@ endif CUSTOM_TAP_DANCE ?= yes ifeq ($(strip $(TAP_DANCE_ENABLE)), yes) ifeq ($(strip $(TAP_DANCE_ENABLE)), yes) - SRC += tap_dances.c + SRC += $(USER_PATH)/tap_dances.c endif endif CUSTOM_RGBLIGHT ?= yes ifeq ($(strip $(RGBLIGHT_ENABLE)), yes) ifeq ($(strip $(CUSTOM_RGBLIGHT)), yes) - SRC += rgb_stuff.c + SRC += $(USER_PATH)/rgb_stuff.c ifeq ($(strip $(RGBLIGHT_NOEEPROM)), yes) OPT_DEFS += -DRGBLIGHT_NOEEPROM endif @@ -41,7 +41,7 @@ endif CUSTOM_RGB_MATRIX ?= yes ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes) ifeq ($(strip $(CUSTOM_RGB_MATRIX)), yes) - SRC += rgb_matrix_stuff.c + SRC += $(USER_PATH)/rgb_matrix_stuff.c endif endif @@ -66,7 +66,7 @@ endif CUSTOM_OLED_DRIVER ?= yes ifeq ($(strip $(OLED_ENABLE)), yes) ifeq ($(strip $(CUSTOM_OLED_DRIVER)), yes) - SRC += oled_stuff.c + SRC += $(USER_PATH)/oled_stuff.c OPT_DEFS += -DCUSTOM_OLED_DRIVER_CODE endif endif @@ -81,7 +81,7 @@ endif CUSTOM_SPLIT_TRANSPORT_SYNC ?= yes ifeq ($(strip $(CUSTOM_SPLIT_TRANSPORT_SYNC)), yes) ifeq ($(strip $(SPLIT_KEYBOARD)), yes) - QUANTUM_LIB_SRC += transport_sync.c + QUANTUM_LIB_SRC += $(USER_PATH)/transport_sync.c OPT_DEFS += -DCUSTOM_SPLIT_TRANSPORT_SYNC endif endif diff --git a/users/drashna/transport_sync.c b/users/drashna/transport_sync.c index fdd596c04c..39db641354 100644 --- a/users/drashna/transport_sync.c +++ b/users/drashna/transport_sync.c @@ -23,7 +23,8 @@ extern unicode_config_t unicode_config; #endif #ifdef AUDIO_ENABLE # include "audio.h" -extern bool delayed_tasks_run; +extern audio_config_t audio_config; +extern bool delayed_tasks_run; #endif #if defined(POINTING_DEVICE_ENABLE) && defined(KEYBOARD_handwired_tractyl_manuform) extern bool tap_toggling; @@ -33,14 +34,6 @@ extern bool swap_hands; #endif extern userspace_config_t userspace_config; -__attribute__((aligned(8))) typedef struct { - bool audio_enable; - bool audio_clicky_enable; - bool tap_toggling; - bool unicode_mode; - bool swap_hands; -} user_runtime_config_t; - uint16_t transport_keymap_config = 0; uint32_t transport_userspace_config = 0; @@ -80,34 +73,18 @@ void user_transport_update(void) { #if defined(POINTING_DEVICE_ENABLE) && defined(KEYBOARD_handwired_tractyl_manuform) user_state.tap_toggling = tap_toggling; #endif +#ifdef UNICODE_ENABLE + user_state.unicode_mode = unicode_config.input_mode; +#endif #ifdef SWAP_HANDS_ENABLE user_state.swap_hands = swap_hands; #endif - } else { keymap_config.raw = transport_keymap_config; userspace_config.raw = transport_userspace_config; #ifdef UNICODE_ENABLE unicode_config.input_mode = user_state.unicode_mode; #endif -#ifdef AUDIO_ENABLE - if (delayed_tasks_run) { - if (user_state.audio_enable != is_audio_on()) { - if (user_state.audio_enable) { - audio_on(); - } else { - audio_off(); - } - } - if (user_state.audio_clicky_enable != is_clicky_on()) { - if (user_state.audio_clicky_enable) { - clicky_on(); - } else { - clicky_off(); - } - } - } -#endif #if defined(POINTING_DEVICE_ENABLE) && defined(KEYBOARD_handwired_tractyl_manuform) tap_toggling = user_state.tap_toggling; #endif diff --git a/users/drashna/transport_sync.h b/users/drashna/transport_sync.h index e2b3eae76b..062df2bacc 100644 --- a/users/drashna/transport_sync.h +++ b/users/drashna/transport_sync.h @@ -19,4 +19,14 @@ #include "drashna.h" +__attribute__((aligned(8))) typedef struct { + bool audio_enable; + bool audio_clicky_enable; + bool tap_toggling; + bool unicode_mode; + bool swap_hands; +} user_runtime_config_t; + +extern user_runtime_config_t user_state; + void keyboard_post_init_transport_sync(void); From 02ab7b1888e6572178543ca0b944e4fa14cdf974 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Wed, 29 Sep 2021 11:37:11 -0700 Subject: [PATCH 160/595] [Core] Fix "6kro enable" and clarify naming (#14563) * Fix USB_6KRO_ENABLE compilation errors * Add info to docs * Rename define to be more accurate * Remove unused rule * Refixe docs --- docs/config_options.md | 2 ++ keyboards/hotdox/rules.mk | 1 - keyboards/ktec/ergodone/rules.mk | 1 - keyboards/planck/keymaps/not-quite-neo/rules.mk | 4 +--- keyboards/planck/keymaps/zach/rules.mk | 6 ++---- keyboards/preonic/keymaps/zach/rules.mk | 6 ++---- quantum/action_util.c | 10 ---------- show_options.mk | 2 +- tests/test_common/keyboard_report_util.cpp | 2 +- tmk_core/common.mk | 4 ++-- tmk_core/common/report.c | 16 +++++++++++++--- 11 files changed, 24 insertions(+), 30 deletions(-) diff --git a/docs/config_options.md b/docs/config_options.md index 7584d3584e..dbf3d3da2e 100644 --- a/docs/config_options.md +++ b/docs/config_options.md @@ -418,6 +418,8 @@ Use these to enable or disable building certain features. The more you have enab * Key combo feature * `NKRO_ENABLE` * USB N-Key Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +* `RING_BUFFERED_6KRO_REPORT_ENABLE` + * USB 6-Key Rollover - Instead of stopping any new input once 6 keys are pressed, the oldest key is released and the new key is pressed. * `AUDIO_ENABLE` * Enable the audio subsystem. * `KEY_OVERRIDE_ENABLE` diff --git a/keyboards/hotdox/rules.mk b/keyboards/hotdox/rules.mk index 3802dbe995..6caa17fab6 100644 --- a/keyboards/hotdox/rules.mk +++ b/keyboards/hotdox/rules.mk @@ -16,7 +16,6 @@ CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA -USB_6KRO_ENABLE = no # USB 6key Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality SWAP_HANDS_ENABLE = no # Disable Onehand RGBLIGHT_ENABLE = no diff --git a/keyboards/ktec/ergodone/rules.mk b/keyboards/ktec/ergodone/rules.mk index 3c1723a3c4..f0478eb3a4 100644 --- a/keyboards/ktec/ergodone/rules.mk +++ b/keyboards/ktec/ergodone/rules.mk @@ -16,7 +16,6 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA -USB_6KRO_ENABLE = no # USB 6key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality SWAP_HANDS_ENABLE = no # Disable Onehand RGBLIGHT_ENABLE = no diff --git a/keyboards/planck/keymaps/not-quite-neo/rules.mk b/keyboards/planck/keymaps/not-quite-neo/rules.mk index b30c3a21e0..b4e2e5c815 100644 --- a/keyboards/planck/keymaps/not-quite-neo/rules.mk +++ b/keyboards/planck/keymaps/not-quite-neo/rules.mk @@ -12,7 +12,6 @@ EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = no # Console for debug(+400) COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -USB_6KRO_ENABLE = no # 6key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output on port C6 @@ -20,7 +19,6 @@ AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode (can't be used with unicodemap) UNICODEMAP_ENABLE = no # Enable extended unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - diff --git a/keyboards/planck/keymaps/zach/rules.mk b/keyboards/planck/keymaps/zach/rules.mk index 3247aece2c..544e10a456 100644 --- a/keyboards/planck/keymaps/zach/rules.mk +++ b/keyboards/planck/keymaps/zach/rules.mk @@ -2,7 +2,7 @@ # Max .hex size is about 28636 bytes # Build Options -# change to "no" to disable the options, or define them in the Makefile in +# change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # TAP_DANCE_ENABLE = yes # Enable TapDance functionality @@ -12,7 +12,6 @@ EXTRAKEY_ENABLE = no # Audio control and System control(+450) CONSOLE_ENABLE = no # Console for debug(+400) COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -USB_6KRO_ENABLE = no # 6key Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output on port C6 @@ -20,7 +19,6 @@ AUDIO_ENABLE = no # Audio output on port C6 UNICODE_ENABLE = no # Unicode (can't be used with unicodemap) UNICODEMAP_ENABLE = yes # Enable extended unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - diff --git a/keyboards/preonic/keymaps/zach/rules.mk b/keyboards/preonic/keymaps/zach/rules.mk index 8d2f75eea3..8cd4f98eeb 100644 --- a/keyboards/preonic/keymaps/zach/rules.mk +++ b/keyboards/preonic/keymaps/zach/rules.mk @@ -2,7 +2,7 @@ # Max .hex size is about 28636 bytes # Build Options -# change to "no" to disable the options, or define them in the Makefile in +# change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # TAP_DANCE_ENABLE = yes # Enable TapDance functionality @@ -12,7 +12,6 @@ EXTRAKEY_ENABLE = no # Audio control and System control(+450) CONSOLE_ENABLE = no # Console for debug(+400) COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -USB_6KRO_ENABLE = no # 6key Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = yes # Audio output on port C6 @@ -20,7 +19,6 @@ AUDIO_ENABLE = yes # Audio output on port C6 UNICODE_ENABLE = no # Unicode UNICODEMAP_ENABLE = yes # Enable extended unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID -RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. +RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - diff --git a/quantum/action_util.c b/quantum/action_util.c index 2b3c00cba0..9a85bd5040 100644 --- a/quantum/action_util.c +++ b/quantum/action_util.c @@ -32,16 +32,6 @@ static uint8_t weak_override_mods = 0; static uint8_t suppressed_mods = 0; #endif -#ifdef USB_6KRO_ENABLE -# define RO_ADD(a, b) ((a + b) % KEYBOARD_REPORT_KEYS) -# define RO_SUB(a, b) ((a - b + KEYBOARD_REPORT_KEYS) % KEYBOARD_REPORT_KEYS) -# define RO_INC(a) RO_ADD(a, 1) -# define RO_DEC(a) RO_SUB(a, 1) -static int8_t cb_head = 0; -static int8_t cb_tail = 0; -static int8_t cb_count = 0; -#endif - // TODO: pointer variable is not needed // report_keyboard_t keyboard_report = {}; report_keyboard_t *keyboard_report = &(report_keyboard_t){}; diff --git a/show_options.mk b/show_options.mk index ce2f9c0636..b17d8c7d9d 100644 --- a/show_options.mk +++ b/show_options.mk @@ -72,7 +72,7 @@ OTHER_OPTION_NAMES = \ PS2_MOUSE_ENABLE \ RAW_ENABLE \ SWAP_HANDS_ENABLE \ - USB_6KRO_ENABLE \ + RING_BUFFERED_6KRO_REPORT_ENABLE \ WATCHDOG_ENABLE \ XT_ENABLE \ ERGOINU \ diff --git a/tests/test_common/keyboard_report_util.cpp b/tests/test_common/keyboard_report_util.cpp index cb044c92b3..f73cf239e0 100644 --- a/tests/test_common/keyboard_report_util.cpp +++ b/tests/test_common/keyboard_report_util.cpp @@ -24,7 +24,7 @@ std::vector get_keys(const report_keyboard_t& report) { std::vector result; #if defined(NKRO_ENABLE) # error NKRO support not implemented yet -#elif defined(USB_6KRO_ENABLE) +#elif defined(RING_BUFFERED_6KRO_REPORT_ENABLE) # error 6KRO support not implemented yet #else for (size_t i = 0; i < KEYBOARD_REPORT_KEYS; i++) { diff --git a/tmk_core/common.mk b/tmk_core/common.mk index 7f74200590..e44ff2f0ab 100644 --- a/tmk_core/common.mk +++ b/tmk_core/common.mk @@ -63,8 +63,8 @@ ifeq ($(strip $(NKRO_ENABLE)), yes) endif endif -ifeq ($(strip $(USB_6KRO_ENABLE)), yes) - TMK_COMMON_DEFS += -DUSB_6KRO_ENABLE +ifeq ($(strip $(RING_BUFFERED_6KRO_REPORT_ENABLE)), yes) + TMK_COMMON_DEFS += -DRING_BUFFERED_6KRO_REPORT_ENABLE endif ifeq ($(strip $(SLEEP_LED_ENABLE)), yes) diff --git a/tmk_core/common/report.c b/tmk_core/common/report.c index 1bcb6f2adb..2a7fc006c4 100644 --- a/tmk_core/common/report.c +++ b/tmk_core/common/report.c @@ -21,6 +21,16 @@ #include "util.h" #include +#ifdef RING_BUFFERED_6KRO_REPORT_ENABLE +# define RO_ADD(a, b) ((a + b) % KEYBOARD_REPORT_KEYS) +# define RO_SUB(a, b) ((a - b + KEYBOARD_REPORT_KEYS) % KEYBOARD_REPORT_KEYS) +# define RO_INC(a) RO_ADD(a, 1) +# define RO_DEC(a) RO_SUB(a, 1) +static int8_t cb_head = 0; +static int8_t cb_tail = 0; +static int8_t cb_count = 0; +#endif + /** \brief has_anykey * * FIXME: Needs doc @@ -54,7 +64,7 @@ uint8_t get_first_key(report_keyboard_t* keyboard_report) { return i << 3 | biton(keyboard_report->nkro.bits[i]); } #endif -#ifdef USB_6KRO_ENABLE +#ifdef RING_BUFFERED_6KRO_REPORT_ENABLE uint8_t i = cb_head; do { if (keyboard_report->keys[i] != 0) { @@ -99,7 +109,7 @@ bool is_key_pressed(report_keyboard_t* keyboard_report, uint8_t key) { * FIXME: Needs doc */ void add_key_byte(report_keyboard_t* keyboard_report, uint8_t code) { -#ifdef USB_6KRO_ENABLE +#ifdef RING_BUFFERED_6KRO_REPORT_ENABLE int8_t i = cb_head; int8_t empty = -1; if (cb_count) { @@ -166,7 +176,7 @@ void add_key_byte(report_keyboard_t* keyboard_report, uint8_t code) { * FIXME: Needs doc */ void del_key_byte(report_keyboard_t* keyboard_report, uint8_t code) { -#ifdef USB_6KRO_ENABLE +#ifdef RING_BUFFERED_6KRO_REPORT_ENABLE uint8_t i = cb_head; if (cb_count) { do { From 8fccd82d4ec8292892067ab06dd235cf9b2d1565 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Wed, 29 Sep 2021 19:48:37 +0000 Subject: [PATCH 161/595] Mechlovin Hannah60RGB touch-up (#14646) * use XXX for KC_NO in rev1.h * add matrix diagram to rev1.h * remove reference to KBFirmware JSON Parser from rev1.h * use XXX for KC_NO in rev2.h * add matrix diagram to rev2.h * add LAYOUT_60_ansi and LAYOUT_60_iso * enable Community Layout support * update info.json metadata - specify keyboard revision in keyboard_name - use GitHub username in maintainer field * remove reference to KBFirmware JSON Parser from main rules.mk --- .../mechlovin/hannah60rgb/rev1/info.json | 4 +- keyboards/mechlovin/hannah60rgb/rev1/rev1.h | 59 +++++--- .../mechlovin/hannah60rgb/rev2/info.json | 143 +++++++++++++++++- keyboards/mechlovin/hannah60rgb/rev2/rev2.h | 57 ++++++- keyboards/mechlovin/hannah60rgb/rules.mk | 3 +- 5 files changed, 236 insertions(+), 30 deletions(-) diff --git a/keyboards/mechlovin/hannah60rgb/rev1/info.json b/keyboards/mechlovin/hannah60rgb/rev1/info.json index a95c11763a..48c878edb1 100644 --- a/keyboards/mechlovin/hannah60rgb/rev1/info.json +++ b/keyboards/mechlovin/hannah60rgb/rev1/info.json @@ -1,7 +1,7 @@ { - "keyboard_name": "hannah60rgb", + "keyboard_name": "hannah60rgb rev1", "url": "", - "maintainer": "Team Mechlovin'", + "maintainer": "mechlovin", "layouts": { "LAYOUT_all": { "layout": [ diff --git a/keyboards/mechlovin/hannah60rgb/rev1/rev1.h b/keyboards/mechlovin/hannah60rgb/rev1/rev1.h index 8fd1c67979..6563644593 100644 --- a/keyboards/mechlovin/hannah60rgb/rev1/rev1.h +++ b/keyboards/mechlovin/hannah60rgb/rev1/rev1.h @@ -18,6 +18,31 @@ along with this program. If not, see . #include "quantum.h" +#define XXX KC_NO + +/* + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ ┌───────┐ + * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0A │0B │0C │0D │1D │ │0D │ 2u Backspace + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤ └─┬─────┤ + * │10 │11 │12 │13 │14 │15 │16 │17 │18 │19 │1A │1B │1C │2C │ │ │ + * 2.25u ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ ┌──┴┐2D │ ISO Enter + * LShift │20 │21 │22 │23 │24 │25 │26 │27 │28 │29 │2A │2B │2D │ │2C │ │ + * ┌────────┐ ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤ ┌─┴───┴────┤ + * │30 │ │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3A │3B │3C │3D │ │3C │ 2.75u RShift + * └────────┘ ├────┼───┴┬──┴─┬─┴───┴──┬┴───┼───┴───┴──┬┴───┼───┴┬────┬┴───┤ └──────────┘ + * │40 │41 │42 │44 │46 │48 │4A │4B │4C │4D │ Split Space 1 + * └────┴────┴────┴────────┴────┴──────────┴────┴────┴────┴────┘ + * ┌────┬────┬────┬──────────┬────┬────────┬────┬────┬────┬────┐ + * │40 │41 │42 │44 │46 │48 │4A │4B │4C │4D │ Split Space 2 + * └────┴────┴────┴──────────┴────┴────────┴────┴────┴────┴────┘ + * ┌────┬────┬────┬────────────────────────┬────┬────┬────┬────┐ + * │40 │41 │42 │46 │4A │4B │4C │4D │ Standard + * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ + * ┌─────┬───┬─────┬───────────────────────────┬─────┬───┬─────┐ + * │40 │41 │42 │46 │4B │4C │4D │ Tsangan/WKL + * └─────┴───┴─────┴───────────────────────────┴─────┴───┴─────┘ + */ + #define LAYOUT_all( \ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K1D, \ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K2C, \ @@ -25,11 +50,11 @@ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ K40, K41, K42, K44, K46, K48, K4A, K4B, K4C, K4D \ ) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \ - { K40, K41, K42, KC_NO, K44, KC_NO, K46, KC_NO, K48, KC_NO, K4A, K4B, K4C, K4D }, \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \ + { K40, K41, K42, XXX, K44, XXX, K46, XXX, K48, XXX, K4A, K4B, K4C, K4D }, \ } #define LAYOUT_60_ansi( \ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ @@ -38,11 +63,11 @@ K40, K41, K42, K44, K46, K48, K4A, K4B, K4C, K4D \ K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \ K40, K41, K42, K46, K4A, K4B, K4C, K4D \ ) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, KC_NO }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ - { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, KC_NO }, \ - { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D }, \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, XXX }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ + { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, XXX }, \ + { K40, K41, K42, XXX, XXX, XXX, K46, XXX, XXX, XXX, K4A, K4B, K4C, K4D }, \ } #define LAYOUT_60_iso( \ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ @@ -51,13 +76,9 @@ K40, K41, K42, K44, K46, K48, K4A, K4B, K4C, K4D \ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \ K40, K41, K42, K46, K4A, K4B, K4C, K4D \ ) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, KC_NO }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, KC_NO }, \ - { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D }, \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, XXX }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, XXX }, \ + { K40, K41, K42, XXX, XXX, XXX, K46, XXX, XXX, XXX, K4A, K4B, K4C, K4D }, \ } - - -// generated by KBFirmware JSON to QMK Parser -// https://noroadsleft.github.io/kbf_qmk_converter/ diff --git a/keyboards/mechlovin/hannah60rgb/rev2/info.json b/keyboards/mechlovin/hannah60rgb/rev2/info.json index d927001a41..74490e03e3 100644 --- a/keyboards/mechlovin/hannah60rgb/rev2/info.json +++ b/keyboards/mechlovin/hannah60rgb/rev2/info.json @@ -1,7 +1,7 @@ { - "keyboard_name": "hannah60rgb", + "keyboard_name": "hannah60rgb rev2", "url": "", - "maintainer": "Team Mechlovin'", + "maintainer": "mechlovin", "layouts": { "LAYOUT_all": { "layout": [ @@ -74,6 +74,145 @@ {"x": 12.5, "y": 4, "w": 1.25}, {"x": 13.75, "y": 4, "w": 1.25} ] + }, + "LAYOUT_60_ansi": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0, "w":2}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3}, + {"x":12.25, "y":3, "w":2.75}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":6.25}, + {"x":10, "y":4, "w":1.25}, + {"x":11.25, "y":4, "w":1.25}, + {"x":12.5, "y":4, "w":1.25}, + {"x":13.75, "y":4, "w":1.25} + ] + }, + "LAYOUT_60_iso": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0, "w":2}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2}, + {"x":13.75, "y":1, "w":1.25, "h":2}, + + {"x":0, "y":3, "w":1.25}, + {"x":1.25, "y":3}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3}, + {"x":12.25, "y":3, "w":2.75}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":6.25}, + {"x":10, "y":4, "w":1.25}, + {"x":11.25, "y":4, "w":1.25}, + {"x":12.5, "y":4, "w":1.25}, + {"x":13.75, "y":4, "w":1.25} + ] } } } diff --git a/keyboards/mechlovin/hannah60rgb/rev2/rev2.h b/keyboards/mechlovin/hannah60rgb/rev2/rev2.h index 3382941e49..7e10c6769a 100644 --- a/keyboards/mechlovin/hannah60rgb/rev2/rev2.h +++ b/keyboards/mechlovin/hannah60rgb/rev2/rev2.h @@ -18,6 +18,25 @@ along with this program. If not, see . #include "quantum.h" +#define XXX KC_NO + +/* + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ ┌───────┐ + * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0A │0B │0C │0D │1D │ │0D │ 2u Backspace + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤ └─┬─────┤ + * │10 │11 │12 │13 │14 │15 │16 │17 │18 │19 │1A │1B │1C │2C │ │ │ + * 2.25u ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ ┌──┴┐2D │ ISO Enter + * LShift │20 │21 │22 │23 │24 │25 │26 │27 │28 │29 │2A │2B │2D │ │2C │ │ + * ┌────────┐ ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤ ┌─┴───┴────┤ + * │30 │ │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3A │3B │3C │3D │ │3C │ 2.75u RShift + * └────────┘ ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬┴───┤ └──────────┘ + * │40 │41 │42 │46 │4A │4B │4C │4D │ Standard + * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ + * ┌─────┬───┬─────┬───────────────────────────┬─────┬───┬─────┐ + * │40 │41 │42 │46 │4B │4C │4D │ Tsangan/WKL + * └─────┴───┴─────┴───────────────────────────┴─────┴───┴─────┘ + */ + #define LAYOUT_all( \ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K1D, \ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K2C, \ @@ -25,9 +44,37 @@ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ K40, K41, K42, K46, K4A, K4B, K4C, K4D \ ) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \ - { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D }, \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \ + { K40, K41, K42, XXX, XXX, XXX, K46, XXX, XXX, XXX, K4A, K4B, K4C, K4D }, \ +} + +#define LAYOUT_60_ansi( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K2C, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \ + K40, K41, K42, K46, K4A, K4B, K4C, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, XXX }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ + { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, XXX }, \ + { K40, K41, K42, XXX, XXX, XXX, K46, XXX, XXX, XXX, K4A, K4B, K4C, K4D }, \ +} + +#define LAYOUT_60_iso( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \ + K40, K41, K42, K46, K4A, K4B, K4C, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, XXX }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, XXX }, \ + { K40, K41, K42, XXX, XXX, XXX, K46, XXX, XXX, XXX, K4A, K4B, K4C, K4D }, \ } diff --git a/keyboards/mechlovin/hannah60rgb/rules.mk b/keyboards/mechlovin/hannah60rgb/rules.mk index c24be862ea..b11ad1d357 100644 --- a/keyboards/mechlovin/hannah60rgb/rules.mk +++ b/keyboards/mechlovin/hannah60rgb/rules.mk @@ -20,7 +20,6 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -# generated by KBFirmware JSON to QMK Parser -# https://noroadsleft.github.io/kbf_qmk_converter/ +LAYOUTS = 60_ansi 60_iso DEFAULT_FOLDER = mechlovin/hannah60rgb/rev1 From b02a5396251c0fadb92f2632e242b555c238ad8b Mon Sep 17 00:00:00 2001 From: Purdea Andrei Date: Wed, 29 Sep 2021 23:31:39 +0300 Subject: [PATCH 162/595] Added power tracking api (#12691) * Add power tracking API to lufa and chibios targets * power.c: Pass through power state to the notify function * power: added notify_power_state_change_user too. * making it pass the PR linter * Add a POWER_STATE_NO_INIT state, that we start in before calling power_init(); * Rename *power* to *usb_power* * removing stray newline * Rename usb_power* to usb_device_state* * Update quantum/usb_device_state.h Co-authored-by: Drashna Jaelre * Fix comment * usb_device_state.h: Don't include quantum.h, only the necessary headers. Co-authored-by: Drashna Jaelre --- common_features.mk | 1 + quantum/usb_device_state.c | 51 ++++++++++++++++++++++++++++ quantum/usb_device_state.h | 39 +++++++++++++++++++++ tmk_core/protocol/chibios/chibios.c | 3 ++ tmk_core/protocol/chibios/usb_main.c | 15 +++++++- tmk_core/protocol/lufa/lufa.c | 13 ++++++- 6 files changed, 120 insertions(+), 2 deletions(-) create mode 100644 quantum/usb_device_state.c create mode 100644 quantum/usb_device_state.h diff --git a/common_features.mk b/common_features.mk index 6193597174..a71bcace02 100644 --- a/common_features.mk +++ b/common_features.mk @@ -29,6 +29,7 @@ QUANTUM_SRC += \ $(QUANTUM_DIR)/keyboard.c \ $(QUANTUM_DIR)/keymap_common.c \ $(QUANTUM_DIR)/keycode_config.c \ + $(QUANTUM_DIR)/usb_device_state.c \ $(QUANTUM_DIR)/logging/debug.c \ $(QUANTUM_DIR)/logging/sendchar.c \ diff --git a/quantum/usb_device_state.c b/quantum/usb_device_state.c new file mode 100644 index 0000000000..5ccd309ec2 --- /dev/null +++ b/quantum/usb_device_state.c @@ -0,0 +1,51 @@ +/* + * Copyright 2021 Andrei Purdea + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "usb_device_state.h" + +enum usb_device_state usb_device_state = USB_DEVICE_STATE_NO_INIT; + +__attribute__((weak)) void notify_usb_device_state_change_kb(enum usb_device_state usb_device_state) { notify_usb_device_state_change_user(usb_device_state); } + +__attribute__((weak)) void notify_usb_device_state_change_user(enum usb_device_state usb_device_state) {} + +static void notify_usb_device_state_change(enum usb_device_state usb_device_state) { notify_usb_device_state_change_kb(usb_device_state); } + +void usb_device_state_set_configuration(bool isConfigured, uint8_t configurationNumber) { + usb_device_state = isConfigured ? USB_DEVICE_STATE_CONFIGURED : USB_DEVICE_STATE_INIT; + notify_usb_device_state_change(usb_device_state); +} + +void usb_device_state_set_suspend(bool isConfigured, uint8_t configurationNumber) { + usb_device_state = USB_DEVICE_STATE_SUSPEND; + notify_usb_device_state_change(usb_device_state); +} + +void usb_device_state_set_resume(bool isConfigured, uint8_t configurationNumber) { + usb_device_state = isConfigured ? USB_DEVICE_STATE_CONFIGURED : USB_DEVICE_STATE_INIT; + notify_usb_device_state_change(usb_device_state); +} + +void usb_device_state_set_reset(void) { + usb_device_state = USB_DEVICE_STATE_INIT; + notify_usb_device_state_change(usb_device_state); +} + +void usb_device_state_init(void) { + usb_device_state = USB_DEVICE_STATE_INIT; + notify_usb_device_state_change(usb_device_state); +} diff --git a/quantum/usb_device_state.h b/quantum/usb_device_state.h new file mode 100644 index 0000000000..c229311d46 --- /dev/null +++ b/quantum/usb_device_state.h @@ -0,0 +1,39 @@ +/* + * Copyright 2021 Andrei Purdea + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include +#include + +void usb_device_state_set_configuration(bool isConfigured, uint8_t configurationNumber); +void usb_device_state_set_suspend(bool isConfigured, uint8_t configurationNumber); +void usb_device_state_set_resume(bool isConfigured, uint8_t configurationNumber); +void usb_device_state_set_reset(void); +void usb_device_state_init(void); + +enum usb_device_state { + USB_DEVICE_STATE_NO_INIT = 0, // We're in this state before calling usb_device_state_init() + USB_DEVICE_STATE_INIT = 1, // Can consume up to 100mA + USB_DEVICE_STATE_CONFIGURED = 2, // Can consume up to what is specified in configuration descriptor, typically 500mA + USB_DEVICE_STATE_SUSPEND = 3 // Can consume only suspend current +}; + +extern enum usb_device_state usb_device_state; + +void notify_usb_device_state_change_kb(enum usb_device_state usb_device_state); +void notify_usb_device_state_change_user(enum usb_device_state usb_device_state); diff --git a/tmk_core/protocol/chibios/chibios.c b/tmk_core/protocol/chibios/chibios.c index 78a2e3fcbb..e5d3a4c540 100644 --- a/tmk_core/protocol/chibios/chibios.c +++ b/tmk_core/protocol/chibios/chibios.c @@ -27,6 +27,7 @@ #include "keyboard.h" #include "action.h" #include "action_util.h" +#include "usb_device_state.h" #include "mousekey.h" #include "led.h" #include "sendchar.h" @@ -139,6 +140,8 @@ void boardInit(void) { } void protocol_setup(void) { + usb_device_state_init(); + // TESTING // chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); diff --git a/tmk_core/protocol/chibios/usb_main.c b/tmk_core/protocol/chibios/usb_main.c index cc282e6a9b..9b139b3992 100644 --- a/tmk_core/protocol/chibios/usb_main.c +++ b/tmk_core/protocol/chibios/usb_main.c @@ -39,6 +39,7 @@ # include "led.h" #endif #include "wait.h" +#include "usb_device_state.h" #include "usb_descriptor.h" #include "usb_driver.h" @@ -412,6 +413,7 @@ static inline bool usb_event_queue_dequeue(usbevent_t *event) { } static inline void usb_event_suspend_handler(void) { + usb_device_state_set_suspend(USB_DRIVER.configuration != 0, USB_DRIVER.configuration); #ifdef SLEEP_LED_ENABLE sleep_led_enable(); #endif /* SLEEP_LED_ENABLE */ @@ -419,6 +421,7 @@ static inline void usb_event_suspend_handler(void) { static inline void usb_event_wakeup_handler(void) { suspend_wakeup_init(); + usb_device_state_set_resume(USB_DRIVER.configuration != 0, USB_DRIVER.configuration); #ifdef SLEEP_LED_ENABLE sleep_led_disable(); // NOTE: converters may not accept this @@ -440,6 +443,15 @@ void usb_event_queue_task(void) { last_suspend_state = false; usb_event_wakeup_handler(); break; + case USB_EVENT_CONFIGURED: + usb_device_state_set_configuration(USB_DRIVER.configuration != 0, USB_DRIVER.configuration); + break; + case USB_EVENT_UNCONFIGURED: + usb_device_state_set_configuration(false, 0); + break; + case USB_EVENT_RESET: + usb_device_state_set_reset(); + break; default: // Nothing to do, we don't handle it. break; @@ -482,13 +494,14 @@ static void usb_event_cb(USBDriver *usbp, usbevent_t event) { if (last_suspend_state) { usb_event_queue_enqueue(USB_EVENT_WAKEUP); } + usb_event_queue_enqueue(USB_EVENT_CONFIGURED); return; case USB_EVENT_SUSPEND: - usb_event_queue_enqueue(USB_EVENT_SUSPEND); /* Falls into.*/ case USB_EVENT_UNCONFIGURED: /* Falls into.*/ case USB_EVENT_RESET: + usb_event_queue_enqueue(event); for (int i = 0; i < NUM_USB_DRIVERS; i++) { chSysLockFromISR(); /* Disconnection event on suspend.*/ diff --git a/tmk_core/protocol/lufa/lufa.c b/tmk_core/protocol/lufa/lufa.c index 4a30d22579..753762358d 100644 --- a/tmk_core/protocol/lufa/lufa.c +++ b/tmk_core/protocol/lufa/lufa.c @@ -52,6 +52,7 @@ #include "usb_descriptor.h" #include "lufa.h" #include "quantum.h" +#include "usb_device_state.h" #include #ifdef NKRO_ENABLE @@ -414,7 +415,10 @@ void EVENT_USB_Device_Disconnect(void) { * * FIXME: Needs doc */ -void EVENT_USB_Device_Reset(void) { print("[R]"); } +void EVENT_USB_Device_Reset(void) { + print("[R]"); + usb_device_state_set_reset(); +} /** \brief Event USB Device Connect * @@ -422,6 +426,8 @@ void EVENT_USB_Device_Reset(void) { print("[R]"); } */ void EVENT_USB_Device_Suspend() { print("[S]"); + usb_device_state_set_suspend(USB_Device_ConfigurationNumber != 0, USB_Device_ConfigurationNumber); + #ifdef SLEEP_LED_ENABLE sleep_led_enable(); #endif @@ -437,6 +443,8 @@ void EVENT_USB_Device_WakeUp() { suspend_wakeup_init(); #endif + usb_device_state_set_resume(USB_DeviceState == DEVICE_STATE_Configured, USB_Device_ConfigurationNumber); + #ifdef SLEEP_LED_ENABLE sleep_led_disable(); // NOTE: converters may not accept this @@ -529,6 +537,8 @@ void EVENT_USB_Device_ConfigurationChanged(void) { /* Setup digitizer endpoint */ ConfigSuccess &= Endpoint_ConfigureEndpoint((DIGITIZER_IN_EPNUM | ENDPOINT_DIR_IN), EP_TYPE_INTERRUPT, DIGITIZER_EPSIZE, 1); #endif + + usb_device_state_set_configuration(USB_DeviceState == DEVICE_STATE_Configured, USB_Device_ConfigurationNumber); } /* FIXME: Expose this table in the docs somehow @@ -1059,6 +1069,7 @@ void protocol_setup(void) { #endif setup_mcu(); + usb_device_state_init(); keyboard_setup(); } From 90797d903c81944c80b4957e118adfb20145b9ba Mon Sep 17 00:00:00 2001 From: Alexandre d'Alton Date: Wed, 29 Sep 2021 22:56:13 +0200 Subject: [PATCH 163/595] massdrop alt/ctrl: support saving into nvm (#6068) * support saving into SmartEEPROM Signed-off-by: Alexandre d Alton * atsam: update smarteeprom implementation - Use define for SmartEEPROM buffer address - Check buffer overflow - Do not perform operation when timeout occurs Signed-off-by: Alexandre d'Alton * return 0 instead of ff for invalid address or timeout Signed-off-by: Alexandre d'Alton * clang-format * Add extra bounds checks Co-authored-by: zvecr --- tmk_core/common/arm_atsam/eeprom.c | 94 ++++++++++++++++++++++++++++-- 1 file changed, 90 insertions(+), 4 deletions(-) diff --git a/tmk_core/common/arm_atsam/eeprom.c b/tmk_core/common/arm_atsam/eeprom.c index ccd5d15a54..ff1a692623 100644 --- a/tmk_core/common/arm_atsam/eeprom.c +++ b/tmk_core/common/arm_atsam/eeprom.c @@ -13,24 +13,110 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ - #include "eeprom.h" +#include "debug.h" +#include "samd51j18a.h" +#include "core_cm4.h" +#include "component/nvmctrl.h" #ifndef EEPROM_SIZE # include "eeconfig.h" # define EEPROM_SIZE (((EECONFIG_SIZE + 3) / 4) * 4) // based off eeconfig's current usage, aligned to 4-byte sizes, to deal with LTO #endif -__attribute__((aligned(4))) static uint8_t buffer[EEPROM_SIZE]; +#ifndef MAX +# define MAX(X, Y) ((X) > (Y) ? (X) : (Y)) +#endif + +#ifndef BUSY_RETRIES +# define BUSY_RETRIES 10000 +#endif + +// #define DEBUG_EEPROM_OUTPUT + +/* + * Debug print utils + */ +#if defined(DEBUG_EEPROM_OUTPUT) +# define eeprom_printf(fmt, ...) xprintf(fmt, ##__VA_ARGS__); +#else /* NO_DEBUG */ +# define eeprom_printf(fmt, ...) +#endif /* NO_DEBUG */ + +__attribute__((aligned(4))) static uint8_t buffer[EEPROM_SIZE] = {0}; +volatile uint8_t * SmartEEPROM8 = (uint8_t *)SEEPROM_ADDR; + +static inline bool eeprom_is_busy(void) { + int timeout = BUSY_RETRIES; + while (NVMCTRL->SEESTAT.bit.BUSY && timeout-- > 0) + ; + + return NVMCTRL->SEESTAT.bit.BUSY; +} + +static uint32_t get_virtual_eeprom_size(void) { + // clang-format off + static const uint32_t VIRTUAL_EEPROM_MAP[11][8] = { + /* 4 8 16 32 64 128 256 512 */ + /* 0*/ { 0, 0, 0, 0, 0, 0, 0, 0 }, + /* 1*/ { 512, 1024, 2048, 4096, 4096, 4096, 4096, 4096 }, + /* 2*/ { 512, 1024, 2048, 4096, 8192, 8192, 8192, 8192 }, + /* 3*/ { 512, 1024, 2048, 4096, 8192, 16384, 16384, 16384 }, + /* 4*/ { 512, 1024, 2048, 4096, 8192, 16384, 16384, 16384 }, + /* 5*/ { 512, 1024, 2048, 4096, 8192, 16384, 32768, 32768 }, + /* 6*/ { 512, 1024, 2048, 4096, 8192, 16384, 32768, 32768 }, + /* 7*/ { 512, 1024, 2048, 4096, 8192, 16384, 32768, 32768 }, + /* 8*/ { 512, 1024, 2048, 4096, 8192, 16384, 32768, 32768 }, + /* 9*/ { 512, 1024, 2048, 4096, 8192, 16384, 32768, 65536 }, + /*10*/ { 512, 1024, 2048, 4096, 8192, 16384, 32768, 65536 }, + }; + // clang-format on + + static uint32_t virtual_eeprom_size = UINT32_MAX; + if (virtual_eeprom_size == UINT32_MAX) { + virtual_eeprom_size = VIRTUAL_EEPROM_MAP[NVMCTRL->SEESTAT.bit.PSZ][NVMCTRL->SEESTAT.bit.SBLK]; + } + // eeprom_printf("get_virtual_eeprom_size:: %d:%d:%d\n", NVMCTRL->SEESTAT.bit.PSZ, NVMCTRL->SEESTAT.bit.SBLK, virtual_eeprom_size); + return virtual_eeprom_size; +} uint8_t eeprom_read_byte(const uint8_t *addr) { uintptr_t offset = (uintptr_t)addr; - return buffer[offset]; + if (offset >= MAX(EEPROM_SIZE, get_virtual_eeprom_size())) { + eeprom_printf("eeprom_read_byte:: out of bounds\n"); + return 0x0; + } + + if (get_virtual_eeprom_size() == 0) { + return buffer[offset]; + } + + if (eeprom_is_busy()) { + eeprom_printf("eeprom_write_byte:: timeout\n"); + return 0x0; + } + + return SmartEEPROM8[offset]; } void eeprom_write_byte(uint8_t *addr, uint8_t value) { uintptr_t offset = (uintptr_t)addr; - buffer[offset] = value; + if (offset >= MAX(EEPROM_SIZE, get_virtual_eeprom_size())) { + eeprom_printf("eeprom_write_byte:: out of bounds\n"); + return; + } + + if (get_virtual_eeprom_size() == 0) { + buffer[offset] = value; + return; + } + + if (eeprom_is_busy()) { + eeprom_printf("eeprom_write_byte:: timeout\n"); + return; + } + + SmartEEPROM8[offset] = value; } uint16_t eeprom_read_word(const uint16_t *addr) { From 36bc3c867eda54921b64b2f4e7262a371dbecd65 Mon Sep 17 00:00:00 2001 From: Ryan Date: Thu, 30 Sep 2021 08:14:21 +1000 Subject: [PATCH 164/595] Remove redundant `UNICODE_ENABLE = no` in keyboard-level rules.mk (#14633) --- keyboards/0xcb/1337/rules.mk | 1 - keyboards/1upkeyboards/1up60hse/rules.mk | 1 - keyboards/1upkeyboards/super16/rules.mk | 1 - keyboards/30wer/rules.mk | 1 - keyboards/40percentclub/25/rules.mk | 1 - keyboards/40percentclub/4pack/rules.mk | 1 - keyboards/40percentclub/4x4/rules.mk | 1 - keyboards/40percentclub/5x5/rules.mk | 1 - keyboards/40percentclub/6lit/rules.mk | 1 - keyboards/40percentclub/foobar/rules.mk | 1 - keyboards/40percentclub/half_n_half/rules.mk | 1 - keyboards/40percentclub/i75/rules.mk | 1 - keyboards/40percentclub/mf68/rules.mk | 1 - keyboards/40percentclub/nein/rules.mk | 1 - keyboards/40percentclub/nori/rules.mk | 1 - keyboards/40percentclub/ut47/rules.mk | 1 - keyboards/4pplet/aekiso60/rev_a/rules.mk | 1 - keyboards/4pplet/steezy60/rev_a/rules.mk | 1 - keyboards/4pplet/waffling60/rev_a/rules.mk | 1 - keyboards/7c8/framework/rules.mk | 1 - keyboards/7skb/rules.mk | 1 - keyboards/abstract/ellipse/rev1/rules.mk | 1 - keyboards/acheron/shark/rules.mk | 1 - keyboards/adkb96/rules.mk | 1 - keyboards/aeboards/aegis/rules.mk | 1 - keyboards/aeboards/ext65/rev1/rules.mk | 1 - keyboards/ai03/equinox/rev0/rules.mk | 1 - keyboards/ai03/equinox/rev1/rules.mk | 1 - keyboards/ai03/lunar/rules.mk | 1 - keyboards/ai03/orbit/rules.mk | 1 - keyboards/ai03/quasar/rules.mk | 1 - keyboards/ai03/soyuz/rules.mk | 1 - keyboards/akb/eb46/rules.mk | 1 - keyboards/akb/raine/rules.mk | 1 - keyboards/alf/dc60/rules.mk | 1 - keyboards/alf/x11/rules.mk | 1 - keyboards/amjkeyboard/amj66/rules.mk | 1 - keyboards/amjpad/rules.mk | 1 - keyboards/angel17/alpha/rules.mk | 1 - keyboards/angel17/rev1/rules.mk | 1 - keyboards/angel17/rules.mk | 1 - keyboards/angel64/rules.mk | 1 - keyboards/aos/tkl/rules.mk | 1 - keyboards/ash1800/rules.mk | 1 - keyboards/ashpil/modelm_usbc/rules.mk | 1 - keyboards/baguette/rules.mk | 1 - keyboards/bantam44/rules.mk | 1 - keyboards/basekeys/slice/rev1/rules.mk | 1 - keyboards/basekeys/slice/rev1_rgb/rules.mk | 1 - keyboards/blank_tehnologii/manibus/rules.mk | 1 - keyboards/blockey/rules.mk | 1 - keyboards/boardrun/bizarre/rules.mk | 1 - keyboards/boardrun/classic/rules.mk | 1 - keyboards/boardsource/4x12/rules.mk | 1 - keyboards/boardsource/5x12/rules.mk | 1 - keyboards/bpiphany/frosty_flake/keymaps/default/rules.mk | 1 - keyboards/bpiphany/frosty_flake/keymaps/tkl/rules.mk | 1 - keyboards/bpiphany/frosty_flake/rules.mk | 1 - keyboards/bpiphany/kitten_paw/rules.mk | 1 - keyboards/bpiphany/pegasushoof/keymaps/default/rules.mk | 1 - keyboards/bpiphany/pegasushoof/keymaps/default_jis/rules.mk | 1 - keyboards/bpiphany/pegasushoof/rules.mk | 1 - keyboards/bpiphany/sixshooter/rules.mk | 1 - keyboards/bpiphany/tiger_lily/keymaps/default/rules.mk | 1 - keyboards/bpiphany/tiger_lily/keymaps/default_ansi/rules.mk | 1 - keyboards/bpiphany/tiger_lily/keymaps/via/rules.mk | 1 - keyboards/bpiphany/tiger_lily/rules.mk | 1 - keyboards/bpiphany/unloved_bastard/rules.mk | 1 - keyboards/bthlabs/geekpad/rules.mk | 1 - keyboards/business_card/alpha/rules.mk | 1 - keyboards/business_card/beta/rules.mk | 1 - keyboards/business_card/rules.mk | 1 - keyboards/c39/rules.mk | 1 - keyboards/chidori/rules.mk | 1 - keyboards/chili/rules.mk | 1 - keyboards/chimera_ergo/rules.mk | 1 - keyboards/chimera_ls/rules.mk | 1 - keyboards/chimera_ortho/rules.mk | 1 - keyboards/christmas_tree/rules.mk | 1 - keyboards/ckeys/handwire_101/rules.mk | 1 - keyboards/ckeys/nakey/rules.mk | 1 - keyboards/ckeys/obelus/rules.mk | 1 - keyboards/claw44/rev1/rules.mk | 1 - keyboards/claw44/rules.mk | 1 - keyboards/clawsome/bookerboard/rules.mk | 1 - keyboards/clawsome/coupe/rules.mk | 1 - keyboards/clawsome/gamebuddy/v1_0/rules.mk | 1 - keyboards/clawsome/sedan/rules.mk | 1 - keyboards/clawsome/sidekick/rules.mk | 1 - keyboards/clueboard/card/keymaps/default/rules.mk | 1 - keyboards/clueboard/card/keymaps/rgb_effects/rules.mk | 1 - keyboards/cocoa40/rules.mk | 1 - keyboards/comet46/rules.mk | 1 - keyboards/contra/rules.mk | 1 - keyboards/converter/hp_46010a/rules.mk | 1 - keyboards/converter/ibm_terminal/keymaps/default/rules.mk | 1 - keyboards/converter/ibm_terminal/rules.mk | 1 - keyboards/converter/modelm101/rules.mk | 1 - keyboards/converter/numeric_keypad_IIe/rules.mk | 1 - keyboards/converter/palm_usb/rules.mk | 1 - keyboards/converter/sun_usb/rules.mk | 1 - keyboards/converter/usb_usb/ble/rules.mk | 1 - keyboards/copenhagen_click/click_pad_v1/rules.mk | 1 - keyboards/coseyfannitutti/discipad/rules.mk | 1 - keyboards/coseyfannitutti/discipline/rules.mk | 1 - keyboards/coseyfannitutti/mullet/rules.mk | 1 - keyboards/coseyfannitutti/mulletpad/rules.mk | 1 - keyboards/coseyfannitutti/mysterium/rules.mk | 1 - keyboards/coseyfannitutti/romeo/rules.mk | 1 - keyboards/cu24/rules.mk | 1 - keyboards/cu75/keymaps/default/rules.mk | 1 - keyboards/cu75/keymaps/iso/rules.mk | 1 - keyboards/cu80/rules.mk | 1 - keyboards/cutie_club/wraith/rules.mk | 1 - keyboards/dc01/arrow/rules.mk | 1 - keyboards/dc01/left/rules.mk | 1 - keyboards/dc01/numpad/rules.mk | 1 - keyboards/dc01/right/rules.mk | 1 - keyboards/dichotomy/rules.mk | 1 - keyboards/diverge3/rules.mk | 1 - keyboards/divergetm2/rules.mk | 1 - keyboards/dm9records/ergoinu/keymaps/default/rules.mk | 1 - keyboards/dm9records/ergoinu/keymaps/default_jis/rules.mk | 1 - keyboards/dm9records/ergoinu/rules.mk | 1 - keyboards/dm9records/plaid/rules.mk | 1 - keyboards/dm9records/tartan/rules.mk | 1 - keyboards/dmqdesign/spin/rules.mk | 1 - keyboards/do60/rules.mk | 1 - keyboards/doppelganger/rules.mk | 1 - keyboards/doro67/multi/rules.mk | 1 - keyboards/doro67/regular/rules.mk | 1 - keyboards/doro67/rgb/rules.mk | 1 - keyboards/dozen0/rules.mk | 1 - keyboards/dp60/rules.mk | 1 - keyboards/duck/jetfire/rules.mk | 1 - keyboards/duck/lightsaver/rules.mk | 1 - keyboards/duck/octagon/v1/rules.mk | 1 - keyboards/duck/octagon/v2/rules.mk | 1 - keyboards/duck/orion/v3/rules.mk | 1 - keyboards/duck/tcv3/rules.mk | 1 - keyboards/eco/keymaps/default/rules.mk | 1 - keyboards/eco/rules.mk | 1 - keyboards/emptystring/NQG/rules.mk | 1 - keyboards/ep/40/rules.mk | 1 - keyboards/ep/96/rules.mk | 1 - keyboards/ep/comsn/hs68/rules.mk | 1 - keyboards/ep/comsn/mollydooker/rules.mk | 1 - keyboards/ep/comsn/tf_longeboye/rules.mk | 1 - keyboards/ergodash/rules.mk | 1 - keyboards/ergosaurus/rules.mk | 1 - keyboards/ergoslab/rules.mk | 1 - keyboards/ergotravel/rules.mk | 1 - keyboards/ericrlau/numdiscipline/rev1/rules.mk | 1 - keyboards/evil80/rules.mk | 1 - keyboards/evyd13/eon40/rules.mk | 1 - keyboards/evyd13/eon65/rules.mk | 1 - keyboards/evyd13/eon75/rules.mk | 1 - keyboards/evyd13/eon87/rules.mk | 1 - keyboards/evyd13/eon95/rules.mk | 1 - keyboards/evyd13/minitomic/rules.mk | 1 - keyboards/evyd13/mx5160/rules.mk | 1 - keyboards/evyd13/omrontkl/rules.mk | 1 - keyboards/evyd13/plain60/rules.mk | 1 - keyboards/evyd13/wonderland/rules.mk | 1 - keyboards/exclusive/e6v2/le/rules.mk | 1 - keyboards/exclusive/e6v2/le_bmc/rules.mk | 1 - keyboards/exclusive/e6v2/oe/rules.mk | 1 - keyboards/exclusive/e6v2/oe_bmc/rules.mk | 1 - keyboards/felix/rules.mk | 1 - keyboards/flehrad/downbubble/rules.mk | 1 - keyboards/fleuron/rules.mk | 1 - keyboards/fluorite/rules.mk | 1 - keyboards/flx/lodestone/rules.mk | 1 - keyboards/flx/virgo/rules.mk | 1 - keyboards/foxlab/leaf60/hotswap/rules.mk | 1 - keyboards/foxlab/leaf60/universal/rules.mk | 1 - keyboards/fractal/rules.mk | 1 - keyboards/geekboards/tester/rules.mk | 1 - keyboards/getta25/rules.mk | 1 - keyboards/gh60/revc/rules.mk | 1 - keyboards/gh60/satan/keymaps/default/rules.mk | 2 -- keyboards/gh60/satan/rules.mk | 1 - keyboards/gingham/rules.mk | 1 - keyboards/gon/nerdtkl/rules.mk | 1 - keyboards/gray_studio/cod67/rules.mk | 1 - keyboards/gray_studio/space65/rules.mk | 1 - keyboards/gray_studio/think65/hotswap/rules.mk | 1 - keyboards/gray_studio/think65/solder/rules.mk | 1 - keyboards/grid600/press/rules.mk | 1 - keyboards/hadron/ver2/rules.mk | 1 - keyboards/halberd/rules.mk | 1 - keyboards/handwired/108key_trackpoint/rules.mk | 1 - keyboards/handwired/412_64/rules.mk | 1 - keyboards/handwired/42/rules.mk | 3 --- keyboards/handwired/aplx2/rules.mk | 1 - keyboards/handwired/aranck/rules.mk | 1 - keyboards/handwired/arrow_pad/rules.mk | 1 - keyboards/handwired/atreus50/rules.mk | 1 - keyboards/handwired/bdn9_ble/rules.mk | 1 - keyboards/handwired/boss566y/redragon_vara/rules.mk | 1 - keyboards/handwired/chiron/rules.mk | 3 --- keyboards/handwired/cmd60/rules.mk | 1 - keyboards/handwired/co60/rev1/rules.mk | 1 - keyboards/handwired/co60/rev6/rules.mk | 1 - keyboards/handwired/co60/rev7/rules.mk | 1 - keyboards/handwired/colorlice/rules.mk | 1 - keyboards/handwired/dactyl_left/rules.mk | 1 - keyboards/handwired/dactyl_promicro/rules.mk | 1 - keyboards/handwired/daishi/rules.mk | 1 - keyboards/handwired/datahand/rules.mk | 1 - keyboards/handwired/ddg_56/rules.mk | 1 - keyboards/handwired/fivethirteen/rules.mk | 2 -- keyboards/handwired/frenchdev/rules.mk | 2 -- keyboards/handwired/fruity60/rules.mk | 1 - keyboards/handwired/gamenum/rules.mk | 1 - keyboards/handwired/hacked_motospeed/rules.mk | 1 - keyboards/handwired/heisenberg/rules.mk | 1 - keyboards/handwired/hnah40/rules.mk | 1 - keyboards/handwired/hnah40rgb/rules.mk | 1 - keyboards/handwired/ibm122m/rules.mk | 1 - keyboards/handwired/jn68m/rules.mk | 1 - keyboards/handwired/jot50/rules.mk | 1 - keyboards/handwired/jotanck/rules.mk | 1 - keyboards/handwired/jotpad16/rules.mk | 1 - keyboards/handwired/juliet/rules.mk | 1 - keyboards/handwired/k_numpad17/rules.mk | 1 - keyboards/handwired/kbod/keymaps/default/rules.mk | 1 - keyboards/handwired/kbod/rules.mk | 1 - keyboards/handwired/magicforce61/rules.mk | 1 - keyboards/handwired/magicforce68/rules.mk | 1 - keyboards/handwired/mechboards_micropad/rules.mk | 1 - keyboards/handwired/minorca/rules.mk | 1 - keyboards/handwired/ms_sculpt_mobile/keymaps/default/rules.mk | 1 - keyboards/handwired/ms_sculpt_mobile/rules.mk | 1 - keyboards/handwired/myskeeb/rules.mk | 1 - keyboards/handwired/not_so_minidox/rules.mk | 1 - keyboards/handwired/numpad20/rules.mk | 1 - keyboards/handwired/ortho5x13/rules.mk | 1 - keyboards/handwired/owlet60/rules.mk | 1 - keyboards/handwired/pilcrow/keymaps/default/rules.mk | 1 - keyboards/handwired/pilcrow/rules.mk | 1 - keyboards/handwired/prime_exl/rules.mk | 1 - keyboards/handwired/prime_exl_plus/rules.mk | 1 - keyboards/handwired/promethium/keymaps/default/rules.mk | 1 - keyboards/handwired/promethium/rules.mk | 2 -- keyboards/handwired/pteron/rules.mk | 2 -- keyboards/handwired/qc60/rules.mk | 1 - keyboards/handwired/reddot/rules.mk | 1 - keyboards/handwired/retro_refit/rules.mk | 1 - keyboards/handwired/slash/rules.mk | 1 - keyboards/handwired/splittest/rules.mk | 1 - keyboards/handwired/steamvan/rev1/rules.mk | 1 - keyboards/handwired/symmetry60/rules.mk | 1 - keyboards/handwired/tennie/rules.mk | 1 - keyboards/handwired/terminus_mini/keymaps/default/rules.mk | 1 - keyboards/handwired/terminus_mini/rules.mk | 1 - keyboards/handwired/trackpoint/rules.mk | 1 - keyboards/handwired/tritium_numpad/rules.mk | 1 - keyboards/handwired/wulkan/rules.mk | 2 -- keyboards/handwired/xealous/rules.mk | 1 - keyboards/hecomi/alpha/rules.mk | 1 - keyboards/hecomi/rules.mk | 1 - keyboards/heliar/wm1_hotswap/rules.mk | 1 - keyboards/helix/rules.mk | 1 - keyboards/hhkb/ansi/rules.mk | 1 - keyboards/hhkb/jp/rules.mk | 1 - keyboards/hid_liber/rules.mk | 1 - keyboards/hifumi/rules.mk | 1 - keyboards/hineybush/h87a/rules.mk | 1 - keyboards/hineybush/h88/rules.mk | 1 - keyboards/hineybush/hbcp/rules.mk | 1 - keyboards/hineybush/hineyg80/rules.mk | 1 - keyboards/honeycomb/rules.mk | 1 - keyboards/hs60/v1/rules.mk | 1 - keyboards/hub16/rules.mk | 1 - keyboards/id80/rules.mk | 1 - keyboards/idobo/rules.mk | 1 - keyboards/illuminati/is0/rules.mk | 1 - keyboards/ivy/rules.mk | 1 - keyboards/jc65/v32u4/rules.mk | 1 - keyboards/jd40/rules.mk | 1 - keyboards/jd45/rules.mk | 1 - keyboards/jisplit89/rules.mk | 1 - keyboards/jnao/rules.mk | 1 - keyboards/kagamidget/rules.mk | 1 - keyboards/kbdfans/kbd19x/rules.mk | 1 - keyboards/kbdfans/kbd4x/rules.mk | 1 - keyboards/kbdfans/kbd66/rules.mk | 1 - keyboards/kbdfans/kbd67/hotswap/rules.mk | 1 - keyboards/kbdfans/kbd67/mkii_soldered/rules.mk | 1 - keyboards/kbdfans/kbd67/mkiirgb/v2/rules.mk | 1 - keyboards/kbdfans/kbd67/rev1/rules.mk | 1 - keyboards/kbdfans/kbd67/rev2/rules.mk | 1 - keyboards/kbdfans/kbd6x/rules.mk | 1 - keyboards/kbdfans/kbd8x_mk2/rules.mk | 1 - keyboards/kbdfans/kbdpad_mk2/rules.mk | 1 - keyboards/kbdfans/maja/rules.mk | 1 - keyboards/kc60se/rules.mk | 1 - keyboards/keebio/bdn9/rev1/rules.mk | 1 - keyboards/keebio/bfo9000/rules.mk | 1 - keyboards/keebio/ergodicity/rules.mk | 1 - keyboards/keebio/fourier/rules.mk | 1 - keyboards/keebio/iris/rev1/rules.mk | 1 - keyboards/keebio/iris/rev1_led/rules.mk | 1 - keyboards/keebio/iris/rev2/rules.mk | 1 - keyboards/keebio/iris/rev3/rules.mk | 1 - keyboards/keebio/iris/rev4/rules.mk | 1 - keyboards/keebio/kbo5000/rules.mk | 1 - keyboards/keebio/laplace/rules.mk | 1 - keyboards/keebio/levinson/rules.mk | 1 - keyboards/keebio/nyquist/rev1/rules.mk | 1 - keyboards/keebio/nyquist/rev2/rules.mk | 1 - keyboards/keebio/nyquist/rev3/rules.mk | 1 - keyboards/keebio/quefrency/rules.mk | 1 - keyboards/keebio/rorschach/rules.mk | 1 - keyboards/keebio/sinc/rules.mk | 1 - keyboards/keebio/tragicforce68/rules.mk | 1 - keyboards/keebio/tukey/rules.mk | 1 - keyboards/keebio/viterbi/rules.mk | 1 - keyboards/keebio/wavelet/rules.mk | 1 - keyboards/keyboardio/model01/rules.mk | 1 - keyboards/keyhive/maypad/rules.mk | 1 - keyboards/kinesis/keymaps/default/rules.mk | 1 - keyboards/kinesis/keymaps/default_pretty/rules.mk | 1 - keyboards/kinesis/rules.mk | 1 - keyboards/kingly_keys/romac_plus/rules.mk | 1 - keyboards/kingly_keys/ropro/rules.mk | 1 - keyboards/kingly_keys/soap/rules.mk | 1 - keyboards/kira75/rules.mk | 1 - keyboards/kmac/rules.mk | 1 - keyboards/kmini/rules.mk | 1 - keyboards/knops/mini/rules.mk | 1 - keyboards/kona_classic/keymaps/ansi/rules.mk | 1 - keyboards/kona_classic/keymaps/ansi_arrows/rules.mk | 1 - keyboards/kona_classic/keymaps/ansi_arrows_lcap/rules.mk | 1 - keyboards/kona_classic/keymaps/ansi_split/rules.mk | 1 - keyboards/kona_classic/keymaps/ansi_split_arrows/rules.mk | 1 - keyboards/kona_classic/keymaps/default/rules.mk | 1 - keyboards/kona_classic/keymaps/iso/rules.mk | 1 - keyboards/kona_classic/keymaps/iso_arrows/rules.mk | 1 - keyboards/kona_classic/keymaps/iso_split/rules.mk | 1 - keyboards/kona_classic/keymaps/iso_split_arrows/rules.mk | 1 - keyboards/kona_classic/rules.mk | 1 - keyboards/kprepublic/bm16a/rules.mk | 1 - keyboards/kprepublic/bm43a/rules.mk | 1 - keyboards/kprepublic/bm60rgb/rules.mk | 1 - keyboards/kprepublic/jj40/rules.mk | 1 - keyboards/kprepublic/jj4x4/rules.mk | 1 - keyboards/ktec/staryu/rules.mk | 1 - keyboards/kudox/rules.mk | 1 - keyboards/kudox_game/rules.mk | 1 - keyboards/laptreus/rules.mk | 1 - keyboards/launchpad/rules.mk | 1 - keyboards/lets_split/rules.mk | 1 - keyboards/lets_split_eh/rules.mk | 1 - keyboards/lfkeyboards/lfk78/rules.mk | 1 - keyboards/lfkeyboards/lfk87/keymaps/default/rules.mk | 1 - keyboards/lfkeyboards/lfk87/keymaps/iso/rules.mk | 1 - keyboards/lfkeyboards/lfk87/rules.mk | 1 - keyboards/lfkeyboards/lfkpad/rules.mk | 1 - keyboards/lfkeyboards/mini1800/keymaps/default/rules.mk | 1 - keyboards/lily58/keymaps/default/rules.mk | 1 - keyboards/lily58/rules.mk | 1 - keyboards/massdrop/alt/rules.mk | 1 - keyboards/massdrop/ctrl/rules.mk | 1 - keyboards/maxipad/rules.mk | 1 - keyboards/maxr1998/phoebe/rules.mk | 1 - keyboards/maxr1998/pulse4k/rules.mk | 1 - keyboards/mechkeys/mk60/rules.mk | 1 - keyboards/mechlovin/hannah910/rev1/rules.mk | 1 - keyboards/meishi/rules.mk | 1 - keyboards/meishi2/rules.mk | 1 - keyboards/meme/rules.mk | 1 - keyboards/meson/rules.mk | 1 - keyboards/miniaxe/rules.mk | 1 - keyboards/mint60/rules.mk | 1 - keyboards/miuni32/rules.mk | 1 - keyboards/monstargear/xo87/rgb/rules.mk | 1 - keyboards/moon/rules.mk | 1 - keyboards/mt40/rules.mk | 1 - keyboards/nafuda/rules.mk | 1 - keyboards/naked64/rules.mk | 1 - keyboards/namecard2x4/rules.mk | 2 -- keyboards/navi10/rev0/rules.mk | 1 - keyboards/navi10/rev2/rules.mk | 1 - keyboards/navi10/rev3/rules.mk | 1 - keyboards/nek_type_a/rules.mk | 1 - keyboards/nightmare/rules.mk | 1 - keyboards/niu_mini/rules.mk | 1 - keyboards/nomu30/rev1/rules.mk | 1 - keyboards/noxary/220/rules.mk | 1 - keyboards/noxary/260/rules.mk | 1 - keyboards/noxary/268/rules.mk | 1 - keyboards/noxary/268_2/rules.mk | 1 - keyboards/noxary/280/rules.mk | 1 - keyboards/noxary/x268/rules.mk | 1 - keyboards/ok60/rules.mk | 1 - keyboards/org60/rules.mk | 1 - keyboards/ortho5by12/rules.mk | 1 - keyboards/orthodox/rules.mk | 1 - keyboards/otaku_split/rev0/rules.mk | 1 - keyboards/otaku_split/rev1/rules.mk | 1 - keyboards/pdxkbc/rules.mk | 1 - keyboards/percent/booster/rules.mk | 1 - keyboards/pico/rules.mk | 1 - keyboards/planck/light/rules.mk | 1 - keyboards/planck/rev1/rules.mk | 1 - keyboards/planck/rev2/rules.mk | 1 - keyboards/planck/rev3/rules.mk | 1 - keyboards/planck/rev4/rules.mk | 1 - keyboards/planck/rev5/rules.mk | 1 - keyboards/planck/rev6/rules.mk | 1 - keyboards/ploopyco/mouse/rules.mk | 1 - keyboards/ploopyco/trackball/rules.mk | 1 - keyboards/ploopyco/trackball_mini/rules.mk | 1 - keyboards/ploopyco/trackball_nano/rules.mk | 1 - keyboards/preonic/rev1/rules.mk | 1 - keyboards/preonic/rev2/rules.mk | 1 - keyboards/preonic/rev3/rules.mk | 1 - keyboards/primekb/prime_l/rules.mk | 1 - keyboards/primekb/prime_m/rules.mk | 1 - keyboards/primekb/prime_o/rules.mk | 1 - keyboards/puck/rules.mk | 1 - keyboards/quantrik/kyuu/rules.mk | 1 - keyboards/qwertyydox/rules.mk | 1 - keyboards/rabbit/rabbit68/rules.mk | 1 - keyboards/rart/rart67/rules.mk | 1 - keyboards/rart/rart75/rules.mk | 1 - keyboards/redox/rules.mk | 1 - keyboards/redox_w/rules.mk | 1 - keyboards/redscarf_i/rules.mk | 1 - keyboards/redscarf_iiplus/verb/rules.mk | 1 - keyboards/redscarf_iiplus/verc/rules.mk | 1 - keyboards/redscarf_iiplus/verd/rules.mk | 1 - keyboards/reviung34/rules.mk | 1 - keyboards/reviung39/rules.mk | 1 - keyboards/reviung41/rules.mk | 1 - keyboards/rgbkb/mun/rules.mk | 1 - keyboards/rgbkb/sol/keymaps/default/readme.md | 1 - keyboards/rgbkb/sol/rev1/rules.mk | 1 - keyboards/rgbkb/sol/rev2/rules.mk | 1 - keyboards/rgbkb/zen/rules.mk | 1 - keyboards/rgbkb/zygomorph/keymaps/default/readme.md | 1 - keyboards/rgbkb/zygomorph/keymaps/default/rules.mk | 1 - keyboards/rgbkb/zygomorph/keymaps/default_oled/rules.mk | 1 - keyboards/rgbkb/zygomorph/rules.mk | 1 - keyboards/runner3680/rules.mk | 1 - keyboards/scarletbandana/rules.mk | 1 - keyboards/sck/m0116b/rules.mk | 1 - keyboards/sck/neiso/rules.mk | 1 - keyboards/sck/osa/rules.mk | 1 - keyboards/scythe/rules.mk | 1 - keyboards/sentraq/number_pad/rules.mk | 1 - keyboards/sentraq/s60_x/default/rules.mk | 1 - keyboards/sentraq/s60_x/rgb/rules.mk | 1 - keyboards/sentraq/s65_plus/rules.mk | 1 - keyboards/sentraq/s65_x/rules.mk | 1 - keyboards/setta21/rules.mk | 1 - keyboards/shiro/rules.mk | 1 - keyboards/silverbullet44/rules.mk | 1 - keyboards/sixkeyboard/rules.mk | 1 - keyboards/smk60/rules.mk | 1 - keyboards/snampad/rules.mk | 1 - keyboards/spacetime/rules.mk | 1 - keyboards/splitkb/kyria/rules.mk | 1 - keyboards/splitreus62/rules.mk | 1 - keyboards/standaside/rules.mk | 1 - keyboards/subatomic/rules.mk | 1 - keyboards/suihankey/rules.mk | 1 - keyboards/switchplate/southpaw_65/rules.mk | 1 - keyboards/tada68/rules.mk | 1 - keyboards/tanuki/rules.mk | 1 - keyboards/tender/macrowo_pad/rules.mk | 1 - keyboards/the_royal/schwann/rules.mk | 2 -- keyboards/the_ruler/rules.mk | 1 - keyboards/thevankeyboards/caravan/rules.mk | 1 - keyboards/thevankeyboards/minivan/rules.mk | 1 - keyboards/thevankeyboards/roadkit/rules.mk | 1 - keyboards/tkc/osav2/rules.mk | 1 - keyboards/tkc/tkc1800/rules.mk | 1 - keyboards/tmo50/rules.mk | 1 - keyboards/tokyokeyboard/tokyo60/rules.mk | 1 - keyboards/touchpad/rules.mk | 1 - keyboards/treadstone32/rules.mk | 1 - keyboards/treasure/type9/rules.mk | 1 - keyboards/uranuma/rules.mk | 1 - keyboards/ut472/rules.mk | 1 - keyboards/uzu42/rules.mk | 1 - keyboards/v60_type_r/rules.mk | 1 - keyboards/vitamins_included/rules.mk | 1 - keyboards/waldo/rules.mk | 1 - keyboards/westfoxtrot/aanzee/rules.mk | 1 - keyboards/westfoxtrot/cyclops/rules.mk | 1 - keyboards/westfoxtrot/cypher/rev1/rules.mk | 1 - keyboards/westfoxtrot/cypher/rev5/rules.mk | 1 - keyboards/wheatfield/blocked65/rules.mk | 1 - keyboards/wilba_tech/rama_works_koyu/rules.mk | 1 - keyboards/wilba_tech/rama_works_m10_b/rules.mk | 1 - keyboards/wilba_tech/rama_works_m60_a/rules.mk | 1 - keyboards/wilba_tech/rama_works_m6_a/rules.mk | 1 - keyboards/wilba_tech/rama_works_m6_b/rules.mk | 1 - keyboards/wilba_tech/rama_works_u80_a/rules.mk | 1 - keyboards/wilba_tech/wt60_a/rules.mk | 1 - keyboards/wilba_tech/wt60_b/rules.mk | 1 - keyboards/wilba_tech/wt60_bx/rules.mk | 1 - keyboards/wilba_tech/wt60_c/rules.mk | 1 - keyboards/wilba_tech/wt60_d/rules.mk | 1 - keyboards/wilba_tech/wt60_xt/rules.mk | 1 - keyboards/wilba_tech/wt65_a/rules.mk | 1 - keyboards/wilba_tech/wt65_b/rules.mk | 1 - keyboards/wilba_tech/wt69_a/rules.mk | 1 - keyboards/wilba_tech/wt75_a/rules.mk | 1 - keyboards/wilba_tech/wt75_b/rules.mk | 1 - keyboards/wilba_tech/wt75_c/rules.mk | 1 - keyboards/wilba_tech/wt80_a/rules.mk | 1 - keyboards/wilba_tech/wt80_bc/rules.mk | 1 - keyboards/wilba_tech/wt8_a/rules.mk | 1 - keyboards/wilba_tech/zeal60/rules.mk | 1 - keyboards/wilba_tech/zeal65/rules.mk | 1 - keyboards/wolfmarkclub/wm1/rules.mk | 1 - keyboards/wsk/gothic50/rules.mk | 1 - keyboards/wsk/gothic70/rules.mk | 1 - keyboards/xelus/dawn60/rev1/rules.mk | 1 - keyboards/xelus/dawn60/rev1_qmk/rules.mk | 1 - keyboards/xelus/pachi/rgb/rules.mk | 1 - keyboards/xelus/snap96/rules.mk | 1 - keyboards/xiudi/xd002/rules.mk | 1 - keyboards/xiudi/xd004/v1/rules.mk | 1 - keyboards/xiudi/xd60/rev2/rules.mk | 1 - keyboards/xiudi/xd60/rev3/rules.mk | 1 - keyboards/xiudi/xd68/rules.mk | 1 - keyboards/xiudi/xd84/rules.mk | 1 - keyboards/xiudi/xd87/rules.mk | 1 - keyboards/xiudi/xd96/rules.mk | 1 - keyboards/xw60/rules.mk | 1 - keyboards/yd68/rules.mk | 1 - keyboards/yeehaw/rules.mk | 1 - keyboards/yncognito/batpad/rules.mk | 1 - keyboards/yosino58/rules.mk | 1 - keyboards/zinc/keymaps/default/rules.mk | 1 - keyboards/zinc/rules.mk | 1 - 541 files changed, 553 deletions(-) diff --git a/keyboards/0xcb/1337/rules.mk b/keyboards/0xcb/1337/rules.mk index 5bcc37be16..ec5e339560 100644 --- a/keyboards/0xcb/1337/rules.mk +++ b/keyboards/0xcb/1337/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes diff --git a/keyboards/1upkeyboards/1up60hse/rules.mk b/keyboards/1upkeyboards/1up60hse/rules.mk index 911f0fc0f3..259fea0256 100644 --- a/keyboards/1upkeyboards/1up60hse/rules.mk +++ b/keyboards/1upkeyboards/1up60hse/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output EXTRAFLAGS += -flto diff --git a/keyboards/1upkeyboards/super16/rules.mk b/keyboards/1upkeyboards/super16/rules.mk index fb048787c9..d19e1ac8f4 100644 --- a/keyboards/1upkeyboards/super16/rules.mk +++ b/keyboards/1upkeyboards/super16/rules.mk @@ -20,7 +20,6 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGB_MATRIX_ENABLE = yes RGB_MATRIX_DRIVER = WS2812 -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_4x4 numpad_4x4 diff --git a/keyboards/30wer/rules.mk b/keyboards/30wer/rules.mk index 6e50506d15..22b187f406 100644 --- a/keyboards/30wer/rules.mk +++ b/keyboards/30wer/rules.mk @@ -16,5 +16,4 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/40percentclub/25/rules.mk b/keyboards/40percentclub/25/rules.mk index 0bcdd908d2..ff835097a1 100644 --- a/keyboards/40percentclub/25/rules.mk +++ b/keyboards/40percentclub/25/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output # Enable generic behavior for split boards diff --git a/keyboards/40percentclub/4pack/rules.mk b/keyboards/40percentclub/4pack/rules.mk index a74abd94fd..1d49abd4f5 100644 --- a/keyboards/40percentclub/4pack/rules.mk +++ b/keyboards/40percentclub/4pack/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/40percentclub/4x4/rules.mk b/keyboards/40percentclub/4x4/rules.mk index ad18e92bd6..89c16be1ef 100644 --- a/keyboards/40percentclub/4x4/rules.mk +++ b/keyboards/40percentclub/4x4/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_4x4 ortho_4x12 diff --git a/keyboards/40percentclub/5x5/rules.mk b/keyboards/40percentclub/5x5/rules.mk index d0bdb0adc7..ded525e62d 100644 --- a/keyboards/40percentclub/5x5/rules.mk +++ b/keyboards/40percentclub/5x5/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_5x15 diff --git a/keyboards/40percentclub/6lit/rules.mk b/keyboards/40percentclub/6lit/rules.mk index 2f69d38b99..9546290538 100644 --- a/keyboards/40percentclub/6lit/rules.mk +++ b/keyboards/40percentclub/6lit/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output # Enable generic behavior for split boards diff --git a/keyboards/40percentclub/foobar/rules.mk b/keyboards/40percentclub/foobar/rules.mk index b01a789349..c21b5c0bbd 100644 --- a/keyboards/40percentclub/foobar/rules.mk +++ b/keyboards/40percentclub/foobar/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output # Enable generic behavior for split boards diff --git a/keyboards/40percentclub/half_n_half/rules.mk b/keyboards/40percentclub/half_n_half/rules.mk index d5f0691417..06eeb35b95 100644 --- a/keyboards/40percentclub/half_n_half/rules.mk +++ b/keyboards/40percentclub/half_n_half/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output # Enable generic behavior for split boards diff --git a/keyboards/40percentclub/i75/rules.mk b/keyboards/40percentclub/i75/rules.mk index 28bebd5f4d..719351cec6 100644 --- a/keyboards/40percentclub/i75/rules.mk +++ b/keyboards/40percentclub/i75/rules.mk @@ -12,7 +12,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_5x15 diff --git a/keyboards/40percentclub/mf68/rules.mk b/keyboards/40percentclub/mf68/rules.mk index 041e53e9cd..5069e083b5 100644 --- a/keyboards/40percentclub/mf68/rules.mk +++ b/keyboards/40percentclub/mf68/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = 68_ansi diff --git a/keyboards/40percentclub/nein/rules.mk b/keyboards/40percentclub/nein/rules.mk index 5c63da2c4b..4411195da2 100644 --- a/keyboards/40percentclub/nein/rules.mk +++ b/keyboards/40percentclub/nein/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/40percentclub/nori/rules.mk b/keyboards/40percentclub/nori/rules.mk index f1ba12b029..181823d0a8 100644 --- a/keyboards/40percentclub/nori/rules.mk +++ b/keyboards/40percentclub/nori/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_4x4 ortho_4x12 diff --git a/keyboards/40percentclub/ut47/rules.mk b/keyboards/40percentclub/ut47/rules.mk index 360dc3f28c..5253dcbdbd 100644 --- a/keyboards/40percentclub/ut47/rules.mk +++ b/keyboards/40percentclub/ut47/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output # custom matrix setup diff --git a/keyboards/4pplet/aekiso60/rev_a/rules.mk b/keyboards/4pplet/aekiso60/rev_a/rules.mk index c335e60118..fadbd21ffc 100644 --- a/keyboards/4pplet/aekiso60/rev_a/rules.mk +++ b/keyboards/4pplet/aekiso60/rev_a/rules.mk @@ -19,4 +19,3 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode diff --git a/keyboards/4pplet/steezy60/rev_a/rules.mk b/keyboards/4pplet/steezy60/rev_a/rules.mk index c335e60118..fadbd21ffc 100644 --- a/keyboards/4pplet/steezy60/rev_a/rules.mk +++ b/keyboards/4pplet/steezy60/rev_a/rules.mk @@ -19,4 +19,3 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode diff --git a/keyboards/4pplet/waffling60/rev_a/rules.mk b/keyboards/4pplet/waffling60/rev_a/rules.mk index c335e60118..fadbd21ffc 100644 --- a/keyboards/4pplet/waffling60/rev_a/rules.mk +++ b/keyboards/4pplet/waffling60/rev_a/rules.mk @@ -19,4 +19,3 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode diff --git a/keyboards/7c8/framework/rules.mk b/keyboards/7c8/framework/rules.mk index 3609cbad27..8c69e2cb8a 100644 --- a/keyboards/7c8/framework/rules.mk +++ b/keyboards/7c8/framework/rules.mk @@ -13,7 +13,6 @@ SLEEP_LED_ENABLE = no NKRO_ENABLE = no BACKLIGHT_ENABLE = no RGBLIGHT_ENABLE = no -UNICODE_ENABLE = no AUDIO_ENABLE = no FAUXCLICKY_ENABLE = no LAYOUTS_HAS_RGB = no diff --git a/keyboards/7skb/rules.mk b/keyboards/7skb/rules.mk index e9215ce9ba..e70348ec5e 100644 --- a/keyboards/7skb/rules.mk +++ b/keyboards/7skb/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/abstract/ellipse/rev1/rules.mk b/keyboards/abstract/ellipse/rev1/rules.mk index f011386846..ebe491e7fc 100644 --- a/keyboards/abstract/ellipse/rev1/rules.mk +++ b/keyboards/abstract/ellipse/rev1/rules.mk @@ -18,6 +18,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes # Enable support for rotary encoders diff --git a/keyboards/acheron/shark/rules.mk b/keyboards/acheron/shark/rules.mk index 624d0cd2ef..0ab8fd2a91 100644 --- a/keyboards/acheron/shark/rules.mk +++ b/keyboards/acheron/shark/rules.mk @@ -19,7 +19,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_4x12 diff --git a/keyboards/adkb96/rules.mk b/keyboards/adkb96/rules.mk index cf3a1bbd11..7a83f7c484 100644 --- a/keyboards/adkb96/rules.mk +++ b/keyboards/adkb96/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/aeboards/aegis/rules.mk b/keyboards/aeboards/aegis/rules.mk index df4c1b12c1..0bedbef453 100644 --- a/keyboards/aeboards/aegis/rules.mk +++ b/keyboards/aeboards/aegis/rules.mk @@ -17,5 +17,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/aeboards/ext65/rev1/rules.mk b/keyboards/aeboards/ext65/rev1/rules.mk index df4c1b12c1..0bedbef453 100644 --- a/keyboards/aeboards/ext65/rev1/rules.mk +++ b/keyboards/aeboards/ext65/rev1/rules.mk @@ -17,5 +17,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/ai03/equinox/rev0/rules.mk b/keyboards/ai03/equinox/rev0/rules.mk index 8eee2ba5df..be4a048405 100644 --- a/keyboards/ai03/equinox/rev0/rules.mk +++ b/keyboards/ai03/equinox/rev0/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/ai03/equinox/rev1/rules.mk b/keyboards/ai03/equinox/rev1/rules.mk index 8eee2ba5df..be4a048405 100644 --- a/keyboards/ai03/equinox/rev1/rules.mk +++ b/keyboards/ai03/equinox/rev1/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/ai03/lunar/rules.mk b/keyboards/ai03/lunar/rules.mk index e7517515fb..3c536c4ba4 100644 --- a/keyboards/ai03/lunar/rules.mk +++ b/keyboards/ai03/lunar/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/ai03/orbit/rules.mk b/keyboards/ai03/orbit/rules.mk index 73565fc75b..fc66f9f6d0 100644 --- a/keyboards/ai03/orbit/rules.mk +++ b/keyboards/ai03/orbit/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output USE_I2C = no # I2C for split communication CUSTOM_MATRIX = yes # For providing custom matrix.c (in this case, override regular matrix.c with split matrix.c) diff --git a/keyboards/ai03/quasar/rules.mk b/keyboards/ai03/quasar/rules.mk index c32087907e..799a157df9 100644 --- a/keyboards/ai03/quasar/rules.mk +++ b/keyboards/ai03/quasar/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/ai03/soyuz/rules.mk b/keyboards/ai03/soyuz/rules.mk index 0946b8f528..ff29dfaf49 100644 --- a/keyboards/ai03/soyuz/rules.mk +++ b/keyboards/ai03/soyuz/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_5x4 numpad_5x4 diff --git a/keyboards/akb/eb46/rules.mk b/keyboards/akb/eb46/rules.mk index d1aca1f406..df18dc487e 100644 --- a/keyboards/akb/eb46/rules.mk +++ b/keyboards/akb/eb46/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/akb/raine/rules.mk b/keyboards/akb/raine/rules.mk index d1aca1f406..df18dc487e 100644 --- a/keyboards/akb/raine/rules.mk +++ b/keyboards/akb/raine/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/alf/dc60/rules.mk b/keyboards/alf/dc60/rules.mk index 3ecfb612e6..4fe63f4f8b 100644 --- a/keyboards/alf/dc60/rules.mk +++ b/keyboards/alf/dc60/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/alf/x11/rules.mk b/keyboards/alf/x11/rules.mk index 84a047b028..b4bdead9bf 100644 --- a/keyboards/alf/x11/rules.mk +++ b/keyboards/alf/x11/rules.mk @@ -18,6 +18,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output EXTRAFLAGS += -flto diff --git a/keyboards/amjkeyboard/amj66/rules.mk b/keyboards/amjkeyboard/amj66/rules.mk index 22a8bf5ead..424b34fa2e 100644 --- a/keyboards/amjkeyboard/amj66/rules.mk +++ b/keyboards/amjkeyboard/amj66/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = 66_ansi 66_iso diff --git a/keyboards/amjpad/rules.mk b/keyboards/amjpad/rules.mk index 2d87f5f734..e1c547fa67 100644 --- a/keyboards/amjpad/rules.mk +++ b/keyboards/amjpad/rules.mk @@ -16,6 +16,5 @@ NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https:/ RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality AUDIO_ENABLE = no -UNICODE_ENABLE = no # Unicode LAYOUTS = numpad_6x4 ortho_6x4 diff --git a/keyboards/angel17/alpha/rules.mk b/keyboards/angel17/alpha/rules.mk index 3a5a26351b..f52bd82b85 100644 --- a/keyboards/angel17/alpha/rules.mk +++ b/keyboards/angel17/alpha/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = numpad_5x4 diff --git a/keyboards/angel17/rev1/rules.mk b/keyboards/angel17/rev1/rules.mk index 2c1b2bb6c6..c34cd11180 100644 --- a/keyboards/angel17/rev1/rules.mk +++ b/keyboards/angel17/rev1/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = numpad_5x4 diff --git a/keyboards/angel17/rules.mk b/keyboards/angel17/rules.mk index 06490083f0..3ca11a92d8 100644 --- a/keyboards/angel17/rules.mk +++ b/keyboards/angel17/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = numpad_5x4 diff --git a/keyboards/angel64/rules.mk b/keyboards/angel64/rules.mk index 79166def1f..473f9047be 100644 --- a/keyboards/angel64/rules.mk +++ b/keyboards/angel64/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output OLED_ENABLE = yes OLED_DRIVER = SSD1306 diff --git a/keyboards/aos/tkl/rules.mk b/keyboards/aos/tkl/rules.mk index b693ed65c2..0b052e3312 100644 --- a/keyboards/aos/tkl/rules.mk +++ b/keyboards/aos/tkl/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/ash1800/rules.mk b/keyboards/ash1800/rules.mk index 71d090ad12..058392135a 100644 --- a/keyboards/ash1800/rules.mk +++ b/keyboards/ash1800/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/ashpil/modelm_usbc/rules.mk b/keyboards/ashpil/modelm_usbc/rules.mk index 71616694cf..8b717faa40 100644 --- a/keyboards/ashpil/modelm_usbc/rules.mk +++ b/keyboards/ashpil/modelm_usbc/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/baguette/rules.mk b/keyboards/baguette/rules.mk index 7f71200052..d77ba07eb7 100644 --- a/keyboards/baguette/rules.mk +++ b/keyboards/baguette/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/bantam44/rules.mk b/keyboards/bantam44/rules.mk index 0219b88fe8..8ea08d0007 100644 --- a/keyboards/bantam44/rules.mk +++ b/keyboards/bantam44/rules.mk @@ -17,4 +17,3 @@ COMMAND_ENABLE = yes # Commands for debug and configuration # NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI support -# UNICODE_ENABLE = YES # Unicode diff --git a/keyboards/basekeys/slice/rev1/rules.mk b/keyboards/basekeys/slice/rev1/rules.mk index 351899fa11..8208c0f04c 100644 --- a/keyboards/basekeys/slice/rev1/rules.mk +++ b/keyboards/basekeys/slice/rev1/rules.mk @@ -19,4 +19,3 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -UNICODE_ENABLE = no # Unicode diff --git a/keyboards/basekeys/slice/rev1_rgb/rules.mk b/keyboards/basekeys/slice/rev1_rgb/rules.mk index 4e78d68216..f9228e6016 100644 --- a/keyboards/basekeys/slice/rev1_rgb/rules.mk +++ b/keyboards/basekeys/slice/rev1_rgb/rules.mk @@ -22,6 +22,5 @@ NKRO_ENABLE = no # USB Nkey Rollover RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow OLED_ENABLE = yes OLED_DRIVER = SSD1306 # Disable OLED driver. -UNICODE_ENABLE = no # Unicode LTO_ENABLE = yes diff --git a/keyboards/blank_tehnologii/manibus/rules.mk b/keyboards/blank_tehnologii/manibus/rules.mk index 781d3fc779..41beb220a7 100644 --- a/keyboards/blank_tehnologii/manibus/rules.mk +++ b/keyboards/blank_tehnologii/manibus/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD = yes diff --git a/keyboards/blockey/rules.mk b/keyboards/blockey/rules.mk index a64106dd1d..ee608e96ea 100644 --- a/keyboards/blockey/rules.mk +++ b/keyboards/blockey/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes diff --git a/keyboards/boardrun/bizarre/rules.mk b/keyboards/boardrun/bizarre/rules.mk index 08b008b5e4..8d08446ee2 100644 --- a/keyboards/boardrun/bizarre/rules.mk +++ b/keyboards/boardrun/bizarre/rules.mk @@ -19,4 +19,3 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode diff --git a/keyboards/boardrun/classic/rules.mk b/keyboards/boardrun/classic/rules.mk index 5fc90fc789..a3b924ec2e 100644 --- a/keyboards/boardrun/classic/rules.mk +++ b/keyboards/boardrun/classic/rules.mk @@ -19,4 +19,3 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode diff --git a/keyboards/boardsource/4x12/rules.mk b/keyboards/boardsource/4x12/rules.mk index 89477c3f34..b6805a6865 100644 --- a/keyboards/boardsource/4x12/rules.mk +++ b/keyboards/boardsource/4x12/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_4x12 diff --git a/keyboards/boardsource/5x12/rules.mk b/keyboards/boardsource/5x12/rules.mk index e14073721b..9e7ed55695 100644 --- a/keyboards/boardsource/5x12/rules.mk +++ b/keyboards/boardsource/5x12/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_5x12 diff --git a/keyboards/bpiphany/frosty_flake/keymaps/default/rules.mk b/keyboards/bpiphany/frosty_flake/keymaps/default/rules.mk index 0d371a6467..179c2983bc 100644 --- a/keyboards/bpiphany/frosty_flake/keymaps/default/rules.mk +++ b/keyboards/bpiphany/frosty_flake/keymaps/default/rules.mk @@ -11,6 +11,5 @@ NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: ht BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/bpiphany/frosty_flake/keymaps/tkl/rules.mk b/keyboards/bpiphany/frosty_flake/keymaps/tkl/rules.mk index 30cf92e0cb..09a140b687 100644 --- a/keyboards/bpiphany/frosty_flake/keymaps/tkl/rules.mk +++ b/keyboards/bpiphany/frosty_flake/keymaps/tkl/rules.mk @@ -11,7 +11,6 @@ NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: ht BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/bpiphany/frosty_flake/rules.mk b/keyboards/bpiphany/frosty_flake/rules.mk index 70f2f53083..4bce03b089 100644 --- a/keyboards/bpiphany/frosty_flake/rules.mk +++ b/keyboards/bpiphany/frosty_flake/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output CUSTOM_MATRIX = lite diff --git a/keyboards/bpiphany/kitten_paw/rules.mk b/keyboards/bpiphany/kitten_paw/rules.mk index 8fc863d0b8..cca8b33772 100644 --- a/keyboards/bpiphany/kitten_paw/rules.mk +++ b/keyboards/bpiphany/kitten_paw/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output CUSTOM_MATRIX = yes diff --git a/keyboards/bpiphany/pegasushoof/keymaps/default/rules.mk b/keyboards/bpiphany/pegasushoof/keymaps/default/rules.mk index 590c0a4649..f82fad4ec4 100644 --- a/keyboards/bpiphany/pegasushoof/keymaps/default/rules.mk +++ b/keyboards/bpiphany/pegasushoof/keymaps/default/rules.mk @@ -12,5 +12,4 @@ NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: ht BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/bpiphany/pegasushoof/keymaps/default_jis/rules.mk b/keyboards/bpiphany/pegasushoof/keymaps/default_jis/rules.mk index fa298a7ebd..975974099c 100644 --- a/keyboards/bpiphany/pegasushoof/keymaps/default_jis/rules.mk +++ b/keyboards/bpiphany/pegasushoof/keymaps/default_jis/rules.mk @@ -12,5 +12,4 @@ NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: ht BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/bpiphany/pegasushoof/rules.mk b/keyboards/bpiphany/pegasushoof/rules.mk index 76f79d2111..d4d5fcf460 100644 --- a/keyboards/bpiphany/pegasushoof/rules.mk +++ b/keyboards/bpiphany/pegasushoof/rules.mk @@ -15,7 +15,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. LAYOUTS = tkl_ansi diff --git a/keyboards/bpiphany/sixshooter/rules.mk b/keyboards/bpiphany/sixshooter/rules.mk index 9a3271b904..b9b3e1fd96 100644 --- a/keyboards/bpiphany/sixshooter/rules.mk +++ b/keyboards/bpiphany/sixshooter/rules.mk @@ -17,5 +17,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/bpiphany/tiger_lily/keymaps/default/rules.mk b/keyboards/bpiphany/tiger_lily/keymaps/default/rules.mk index 22af51a29e..177a98c80f 100644 --- a/keyboards/bpiphany/tiger_lily/keymaps/default/rules.mk +++ b/keyboards/bpiphany/tiger_lily/keymaps/default/rules.mk @@ -11,7 +11,6 @@ NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: ht BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/bpiphany/tiger_lily/keymaps/default_ansi/rules.mk b/keyboards/bpiphany/tiger_lily/keymaps/default_ansi/rules.mk index 15deda9435..ef87c3a95b 100644 --- a/keyboards/bpiphany/tiger_lily/keymaps/default_ansi/rules.mk +++ b/keyboards/bpiphany/tiger_lily/keymaps/default_ansi/rules.mk @@ -11,7 +11,6 @@ NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: ht BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/bpiphany/tiger_lily/keymaps/via/rules.mk b/keyboards/bpiphany/tiger_lily/keymaps/via/rules.mk index 39478ff8c9..edd6deae72 100644 --- a/keyboards/bpiphany/tiger_lily/keymaps/via/rules.mk +++ b/keyboards/bpiphany/tiger_lily/keymaps/via/rules.mk @@ -8,6 +8,5 @@ NKRO_ENABLE = yes BACKLIGHT_ENABLE = no MIDI_ENABLE = no AUDIO_ENABLE = no -UNICODE_ENABLE = no RGBLIGHT_ENABLE = no SLEEP_LED_ENABLE = no \ No newline at end of file diff --git a/keyboards/bpiphany/tiger_lily/rules.mk b/keyboards/bpiphany/tiger_lily/rules.mk index 8fc863d0b8..cca8b33772 100644 --- a/keyboards/bpiphany/tiger_lily/rules.mk +++ b/keyboards/bpiphany/tiger_lily/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output CUSTOM_MATRIX = yes diff --git a/keyboards/bpiphany/unloved_bastard/rules.mk b/keyboards/bpiphany/unloved_bastard/rules.mk index daa837b18b..0661b2e92a 100644 --- a/keyboards/bpiphany/unloved_bastard/rules.mk +++ b/keyboards/bpiphany/unloved_bastard/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output CUSTOM_MATRIX = yes diff --git a/keyboards/bthlabs/geekpad/rules.mk b/keyboards/bthlabs/geekpad/rules.mk index 90470e67bd..823434176a 100644 --- a/keyboards/bthlabs/geekpad/rules.mk +++ b/keyboards/bthlabs/geekpad/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/business_card/alpha/rules.mk b/keyboards/business_card/alpha/rules.mk index 2a136256d9..cc3195d5c6 100644 --- a/keyboards/business_card/alpha/rules.mk +++ b/keyboards/business_card/alpha/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output OLED_ENABLE = yes OLED_DRIVER = SSD1306 diff --git a/keyboards/business_card/beta/rules.mk b/keyboards/business_card/beta/rules.mk index 2a136256d9..cc3195d5c6 100644 --- a/keyboards/business_card/beta/rules.mk +++ b/keyboards/business_card/beta/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output OLED_ENABLE = yes OLED_DRIVER = SSD1306 diff --git a/keyboards/business_card/rules.mk b/keyboards/business_card/rules.mk index a95991018a..5cc27c2302 100644 --- a/keyboards/business_card/rules.mk +++ b/keyboards/business_card/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output DEFAULT_FOLDER = business_card/beta diff --git a/keyboards/c39/rules.mk b/keyboards/c39/rules.mk index 279755f1a1..9a55ea62f5 100755 --- a/keyboards/c39/rules.mk +++ b/keyboards/c39/rules.mk @@ -17,6 +17,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = no # RGB Enable / Disable diff --git a/keyboards/chidori/rules.mk b/keyboards/chidori/rules.mk index 9c418ada94..9d6b1d3819 100644 --- a/keyboards/chidori/rules.mk +++ b/keyboards/chidori/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output CUSTOM_MATRIX = lite diff --git a/keyboards/chili/rules.mk b/keyboards/chili/rules.mk index 1a19ab0c28..336ba86fbb 100644 --- a/keyboards/chili/rules.mk +++ b/keyboards/chili/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/chimera_ergo/rules.mk b/keyboards/chimera_ergo/rules.mk index 441d0d09ca..84dff9db7d 100644 --- a/keyboards/chimera_ergo/rules.mk +++ b/keyboards/chimera_ergo/rules.mk @@ -18,7 +18,6 @@ CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA # BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI support -UNICODE_ENABLE = YES # Unicode # # project specific files SRC += matrix.c serial_uart.c diff --git a/keyboards/chimera_ls/rules.mk b/keyboards/chimera_ls/rules.mk index 4ffab53a7e..a847c33099 100644 --- a/keyboards/chimera_ls/rules.mk +++ b/keyboards/chimera_ls/rules.mk @@ -18,7 +18,6 @@ CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA # BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI support -UNICODE_ENABLE = YES # Unicode # project specific files SRC += matrix.c serial_uart.c diff --git a/keyboards/chimera_ortho/rules.mk b/keyboards/chimera_ortho/rules.mk index c2ef78562e..35dba7f203 100644 --- a/keyboards/chimera_ortho/rules.mk +++ b/keyboards/chimera_ortho/rules.mk @@ -18,7 +18,6 @@ CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA # BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI support -UNICODE_ENABLE = YES # Unicode # project specific files SRC += matrix.c serial_uart.c diff --git a/keyboards/christmas_tree/rules.mk b/keyboards/christmas_tree/rules.mk index b86947aca5..b2baf8e3a4 100644 --- a/keyboards/christmas_tree/rules.mk +++ b/keyboards/christmas_tree/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/ckeys/handwire_101/rules.mk b/keyboards/ckeys/handwire_101/rules.mk index b8976c55a4..7d99be0934 100755 --- a/keyboards/ckeys/handwire_101/rules.mk +++ b/keyboards/ckeys/handwire_101/rules.mk @@ -19,5 +19,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI support -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/ckeys/nakey/rules.mk b/keyboards/ckeys/nakey/rules.mk index 74d76917b0..db728e0ac6 100644 --- a/keyboards/ckeys/nakey/rules.mk +++ b/keyboards/ckeys/nakey/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = numpad_5x4 diff --git a/keyboards/ckeys/obelus/rules.mk b/keyboards/ckeys/obelus/rules.mk index 1c2e1e0cc0..fa470c1517 100644 --- a/keyboards/ckeys/obelus/rules.mk +++ b/keyboards/ckeys/obelus/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = yes # MIDI support -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = yes # Audio output LAYOUTS = ortho_4x4 diff --git a/keyboards/claw44/rev1/rules.mk b/keyboards/claw44/rev1/rules.mk index 78fa1043ea..3538ad5680 100644 --- a/keyboards/claw44/rev1/rules.mk +++ b/keyboards/claw44/rev1/rules.mk @@ -7,7 +7,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SWAP_HANDS_ENABLE = no # Enable one-hand typing diff --git a/keyboards/claw44/rules.mk b/keyboards/claw44/rules.mk index a2bb8e0593..433f663824 100644 --- a/keyboards/claw44/rules.mk +++ b/keyboards/claw44/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/clawsome/bookerboard/rules.mk b/keyboards/clawsome/bookerboard/rules.mk index 3c95584e3b..d67d33602d 100644 --- a/keyboards/clawsome/bookerboard/rules.mk +++ b/keyboards/clawsome/bookerboard/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/clawsome/coupe/rules.mk b/keyboards/clawsome/coupe/rules.mk index fd9dcd3089..933784e9c0 100644 --- a/keyboards/clawsome/coupe/rules.mk +++ b/keyboards/clawsome/coupe/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = 60_ansi diff --git a/keyboards/clawsome/gamebuddy/v1_0/rules.mk b/keyboards/clawsome/gamebuddy/v1_0/rules.mk index 27f7bdb896..723de16c21 100644 --- a/keyboards/clawsome/gamebuddy/v1_0/rules.mk +++ b/keyboards/clawsome/gamebuddy/v1_0/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/clawsome/sedan/rules.mk b/keyboards/clawsome/sedan/rules.mk index d4ad4cbf5c..02b80f6fd2 100644 --- a/keyboards/clawsome/sedan/rules.mk +++ b/keyboards/clawsome/sedan/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = 65_ansi diff --git a/keyboards/clawsome/sidekick/rules.mk b/keyboards/clawsome/sidekick/rules.mk index 3c95584e3b..d67d33602d 100644 --- a/keyboards/clawsome/sidekick/rules.mk +++ b/keyboards/clawsome/sidekick/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/clueboard/card/keymaps/default/rules.mk b/keyboards/clueboard/card/keymaps/default/rules.mk index b49199b43d..2dc34d8f4d 100644 --- a/keyboards/clueboard/card/keymaps/default/rules.mk +++ b/keyboards/clueboard/card/keymaps/default/rules.mk @@ -11,6 +11,5 @@ NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: ht BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/clueboard/card/keymaps/rgb_effects/rules.mk b/keyboards/clueboard/card/keymaps/rgb_effects/rules.mk index 91ab65e7e6..1f6a81e274 100644 --- a/keyboards/clueboard/card/keymaps/rgb_effects/rules.mk +++ b/keyboards/clueboard/card/keymaps/rgb_effects/rules.mk @@ -11,6 +11,5 @@ NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: ht BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/cocoa40/rules.mk b/keyboards/cocoa40/rules.mk index 3b354a0a92..ba23678fe8 100644 --- a/keyboards/cocoa40/rules.mk +++ b/keyboards/cocoa40/rules.mk @@ -18,6 +18,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD = yes diff --git a/keyboards/comet46/rules.mk b/keyboards/comet46/rules.mk index 4fecf96866..2c4f42d065 100644 --- a/keyboards/comet46/rules.mk +++ b/keyboards/comet46/rules.mk @@ -18,7 +18,6 @@ CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA # BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI support -UNICODE_ENABLE = YES # Unicode # project specific files SRC += matrix.c \ diff --git a/keyboards/contra/rules.mk b/keyboards/contra/rules.mk index 4624048620..91d887f15b 100755 --- a/keyboards/contra/rules.mk +++ b/keyboards/contra/rules.mk @@ -15,7 +15,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = planck_mit ortho_4x12 diff --git a/keyboards/converter/hp_46010a/rules.mk b/keyboards/converter/hp_46010a/rules.mk index a9aa9b4bd7..f241c30a8c 100644 --- a/keyboards/converter/hp_46010a/rules.mk +++ b/keyboards/converter/hp_46010a/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SPLIT_KEYBOARD = no WAIT_FOR_USB = yes diff --git a/keyboards/converter/ibm_terminal/keymaps/default/rules.mk b/keyboards/converter/ibm_terminal/keymaps/default/rules.mk index 20423329de..8a364bd86d 100644 --- a/keyboards/converter/ibm_terminal/keymaps/default/rules.mk +++ b/keyboards/converter/ibm_terminal/keymaps/default/rules.mk @@ -11,7 +11,6 @@ NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: ht BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. PS2_USE_USART = yes diff --git a/keyboards/converter/ibm_terminal/rules.mk b/keyboards/converter/ibm_terminal/rules.mk index 798211eecd..b73da1a70f 100644 --- a/keyboards/converter/ibm_terminal/rules.mk +++ b/keyboards/converter/ibm_terminal/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. PS2_USE_USART = yes # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/converter/modelm101/rules.mk b/keyboards/converter/modelm101/rules.mk index 23496ae936..fd20c89aa6 100644 --- a/keyboards/converter/modelm101/rules.mk +++ b/keyboards/converter/modelm101/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/converter/numeric_keypad_IIe/rules.mk b/keyboards/converter/numeric_keypad_IIe/rules.mk index 8fde4f64f1..0099557cbe 100644 --- a/keyboards/converter/numeric_keypad_IIe/rules.mk +++ b/keyboards/converter/numeric_keypad_IIe/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/converter/palm_usb/rules.mk b/keyboards/converter/palm_usb/rules.mk index e777724a8d..e7bedd4add 100644 --- a/keyboards/converter/palm_usb/rules.mk +++ b/keyboards/converter/palm_usb/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/converter/sun_usb/rules.mk b/keyboards/converter/sun_usb/rules.mk index 1018a1a6c7..1decefe519 100644 --- a/keyboards/converter/sun_usb/rules.mk +++ b/keyboards/converter/sun_usb/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/converter/usb_usb/ble/rules.mk b/keyboards/converter/usb_usb/ble/rules.mk index 873283f928..438dec834a 100644 --- a/keyboards/converter/usb_usb/ble/rules.mk +++ b/keyboards/converter/usb_usb/ble/rules.mk @@ -12,7 +12,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output BLUETOOTH = AdafruitBLE diff --git a/keyboards/copenhagen_click/click_pad_v1/rules.mk b/keyboards/copenhagen_click/click_pad_v1/rules.mk index dd71f44ccd..50f28c04cf 100755 --- a/keyboards/copenhagen_click/click_pad_v1/rules.mk +++ b/keyboards/copenhagen_click/click_pad_v1/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/coseyfannitutti/discipad/rules.mk b/keyboards/coseyfannitutti/discipad/rules.mk index fb6dfb8440..fadfff9d88 100644 --- a/keyboards/coseyfannitutti/discipad/rules.mk +++ b/keyboards/coseyfannitutti/discipad/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/coseyfannitutti/discipline/rules.mk b/keyboards/coseyfannitutti/discipline/rules.mk index 0d09ea45bd..9099b68d08 100644 --- a/keyboards/coseyfannitutti/discipline/rules.mk +++ b/keyboards/coseyfannitutti/discipline/rules.mk @@ -21,7 +21,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = 65_ansi 65_ansi_blocker 65_iso 65_iso_blocker diff --git a/keyboards/coseyfannitutti/mullet/rules.mk b/keyboards/coseyfannitutti/mullet/rules.mk index f59e51dbb2..299768093d 100644 --- a/keyboards/coseyfannitutti/mullet/rules.mk +++ b/keyboards/coseyfannitutti/mullet/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/coseyfannitutti/mulletpad/rules.mk b/keyboards/coseyfannitutti/mulletpad/rules.mk index e9b5297ad2..e2db22769f 100644 --- a/keyboards/coseyfannitutti/mulletpad/rules.mk +++ b/keyboards/coseyfannitutti/mulletpad/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = numpad_5x4 diff --git a/keyboards/coseyfannitutti/mysterium/rules.mk b/keyboards/coseyfannitutti/mysterium/rules.mk index 9d2c2337df..7e3df06807 100644 --- a/keyboards/coseyfannitutti/mysterium/rules.mk +++ b/keyboards/coseyfannitutti/mysterium/rules.mk @@ -21,7 +21,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = tkl_ansi diff --git a/keyboards/coseyfannitutti/romeo/rules.mk b/keyboards/coseyfannitutti/romeo/rules.mk index ebe8f0684e..7a50fbb778 100644 --- a/keyboards/coseyfannitutti/romeo/rules.mk +++ b/keyboards/coseyfannitutti/romeo/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/cu24/rules.mk b/keyboards/cu24/rules.mk index af20d51c46..7b5d05ae93 100644 --- a/keyboards/cu24/rules.mk +++ b/keyboards/cu24/rules.mk @@ -17,6 +17,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes # RGB drivers diff --git a/keyboards/cu75/keymaps/default/rules.mk b/keyboards/cu75/keymaps/default/rules.mk index 0b6f02ff9f..13abea04ae 100644 --- a/keyboards/cu75/keymaps/default/rules.mk +++ b/keyboards/cu75/keymaps/default/rules.mk @@ -12,7 +12,6 @@ NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here BACKLIGHT_ENABLE = yes # Disable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Disable RGB underlight RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lefkeyboards, not WS2812 SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend diff --git a/keyboards/cu75/keymaps/iso/rules.mk b/keyboards/cu75/keymaps/iso/rules.mk index 5e4eca532f..a468c61b91 100644 --- a/keyboards/cu75/keymaps/iso/rules.mk +++ b/keyboards/cu75/keymaps/iso/rules.mk @@ -12,7 +12,6 @@ NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here # BACKLIGHT_ENABLE = no # Disable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Disable RGB underlight RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lefkeyboards, not WS2812 SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend diff --git a/keyboards/cu80/rules.mk b/keyboards/cu80/rules.mk index 13629b3e04..9b5768ea52 100644 --- a/keyboards/cu80/rules.mk +++ b/keyboards/cu80/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = tkl_iso tkl_ansi diff --git a/keyboards/cutie_club/wraith/rules.mk b/keyboards/cutie_club/wraith/rules.mk index dec6e693f7..575ba17005 100644 --- a/keyboards/cutie_club/wraith/rules.mk +++ b/keyboards/cutie_club/wraith/rules.mk @@ -15,5 +15,4 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/dc01/arrow/rules.mk b/keyboards/dc01/arrow/rules.mk index 61153f4bc6..d5b3fc0722 100644 --- a/keyboards/dc01/arrow/rules.mk +++ b/keyboards/dc01/arrow/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output NO_USB_STARTUP_CHECK = yes # Disable initialization only when usb is plugged in CUSTOM_MATRIX = yes # Use custom matrix diff --git a/keyboards/dc01/left/rules.mk b/keyboards/dc01/left/rules.mk index f6864f8a63..7dbd6bcc03 100644 --- a/keyboards/dc01/left/rules.mk +++ b/keyboards/dc01/left/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output CUSTOM_MATRIX = yes # Use custom matrix diff --git a/keyboards/dc01/numpad/rules.mk b/keyboards/dc01/numpad/rules.mk index ae3f6b4e4f..a0c9849a47 100644 --- a/keyboards/dc01/numpad/rules.mk +++ b/keyboards/dc01/numpad/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output NO_USB_STARTUP_CHECK = yes # Disable initialization only when usb is plugged in CUSTOM_MATRIX = yes # Use custom matrix diff --git a/keyboards/dc01/right/rules.mk b/keyboards/dc01/right/rules.mk index 61153f4bc6..d5b3fc0722 100644 --- a/keyboards/dc01/right/rules.mk +++ b/keyboards/dc01/right/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output NO_USB_STARTUP_CHECK = yes # Disable initialization only when usb is plugged in CUSTOM_MATRIX = yes # Use custom matrix diff --git a/keyboards/dichotomy/rules.mk b/keyboards/dichotomy/rules.mk index bda904cb41..935725a965 100755 --- a/keyboards/dichotomy/rules.mk +++ b/keyboards/dichotomy/rules.mk @@ -19,7 +19,6 @@ CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA # BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI support -UNICODE_ENABLE = YES # Unicode # # project specific files SRC += matrix.c serial_uart.c diff --git a/keyboards/diverge3/rules.mk b/keyboards/diverge3/rules.mk index 925cf0ca21..8d2a5fbe8b 100644 --- a/keyboards/diverge3/rules.mk +++ b/keyboards/diverge3/rules.mk @@ -15,7 +15,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SPLIT_KEYBOARD = yes # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/divergetm2/rules.mk b/keyboards/divergetm2/rules.mk index 7fd231fc16..b5cf31f606 100644 --- a/keyboards/divergetm2/rules.mk +++ b/keyboards/divergetm2/rules.mk @@ -15,7 +15,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/dm9records/ergoinu/keymaps/default/rules.mk b/keyboards/dm9records/ergoinu/keymaps/default/rules.mk index 0f2819358d..36e836e0da 100644 --- a/keyboards/dm9records/ergoinu/keymaps/default/rules.mk +++ b/keyboards/dm9records/ergoinu/keymaps/default/rules.mk @@ -12,7 +12,6 @@ NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: ht BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. SWAP_HANDS_ENABLE = no # Enable one-hand typing diff --git a/keyboards/dm9records/ergoinu/keymaps/default_jis/rules.mk b/keyboards/dm9records/ergoinu/keymaps/default_jis/rules.mk index fa7ec3131f..09aea1892f 100644 --- a/keyboards/dm9records/ergoinu/keymaps/default_jis/rules.mk +++ b/keyboards/dm9records/ergoinu/keymaps/default_jis/rules.mk @@ -12,7 +12,6 @@ NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: ht BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. SWAP_HANDS_ENABLE = no # Enable one-hand typing diff --git a/keyboards/dm9records/ergoinu/rules.mk b/keyboards/dm9records/ergoinu/rules.mk index 1082772d7a..04884050dc 100644 --- a/keyboards/dm9records/ergoinu/rules.mk +++ b/keyboards/dm9records/ergoinu/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SUBPROJECT_rev1 = no USE_I2C = no # i2c is not supported diff --git a/keyboards/dm9records/plaid/rules.mk b/keyboards/dm9records/plaid/rules.mk index f11e542ddc..8cfbec6534 100644 --- a/keyboards/dm9records/plaid/rules.mk +++ b/keyboards/dm9records/plaid/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_4x12 planck_mit diff --git a/keyboards/dm9records/tartan/rules.mk b/keyboards/dm9records/tartan/rules.mk index 3e8c4bd8f1..3e568a0ba0 100644 --- a/keyboards/dm9records/tartan/rules.mk +++ b/keyboards/dm9records/tartan/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_iso 60_iso_split_bs_rshift diff --git a/keyboards/dmqdesign/spin/rules.mk b/keyboards/dmqdesign/spin/rules.mk index 174c0b0c18..0703f80e3b 100644 --- a/keyboards/dmqdesign/spin/rules.mk +++ b/keyboards/dmqdesign/spin/rules.mk @@ -19,6 +19,5 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow MIDI_ENABLE = yes # MIDI support -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes # Enable rotary encoder support diff --git a/keyboards/do60/rules.mk b/keyboards/do60/rules.mk index 0200becc50..ca6e2146c1 100644 --- a/keyboards/do60/rules.mk +++ b/keyboards/do60/rules.mk @@ -15,6 +15,5 @@ MOUSEKEY_ENABLE = yes # Mouse keys NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -UNICODE_ENABLE = no # Unicode LAYOUTS = 60_ansi 60_hhkb 60_ansi_split_bs_rshift diff --git a/keyboards/doppelganger/rules.mk b/keyboards/doppelganger/rules.mk index 45f1a0f06f..161d6da26b 100644 --- a/keyboards/doppelganger/rules.mk +++ b/keyboards/doppelganger/rules.mk @@ -18,6 +18,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD = yes diff --git a/keyboards/doro67/multi/rules.mk b/keyboards/doro67/multi/rules.mk index c0da196665..1318a76a25 100644 --- a/keyboards/doro67/multi/rules.mk +++ b/keyboards/doro67/multi/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = 65_ansi_blocker diff --git a/keyboards/doro67/regular/rules.mk b/keyboards/doro67/regular/rules.mk index 3b36ddf9a7..77d1bbc28a 100644 --- a/keyboards/doro67/regular/rules.mk +++ b/keyboards/doro67/regular/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = 65_ansi_blocker diff --git a/keyboards/doro67/rgb/rules.mk b/keyboards/doro67/rgb/rules.mk index 672edb1ee3..2a575b3e97 100644 --- a/keyboards/doro67/rgb/rules.mk +++ b/keyboards/doro67/rgb/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output RGB_MATRIX_ENABLE = yes RGB_MATRIX_DRIVER = WS2812 diff --git a/keyboards/dozen0/rules.mk b/keyboards/dozen0/rules.mk index 89eb1fa8aa..ac010606a2 100644 --- a/keyboards/dozen0/rules.mk +++ b/keyboards/dozen0/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/dp60/rules.mk b/keyboards/dp60/rules.mk index 496b55a88e..be421280a7 100644 --- a/keyboards/dp60/rules.mk +++ b/keyboards/dp60/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = no # Use RGB underglow light RGB_MATRIX_ENABLE = yes diff --git a/keyboards/duck/jetfire/rules.mk b/keyboards/duck/jetfire/rules.mk index cc6b551386..9ec067e0c0 100644 --- a/keyboards/duck/jetfire/rules.mk +++ b/keyboards/duck/jetfire/rules.mk @@ -19,7 +19,6 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality BACKLIGHT_DRIVER = custom RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output CUSTOM_MATRIX = yes diff --git a/keyboards/duck/lightsaver/rules.mk b/keyboards/duck/lightsaver/rules.mk index 5136f79e7b..429e9d88b4 100644 --- a/keyboards/duck/lightsaver/rules.mk +++ b/keyboards/duck/lightsaver/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality BACKLIGHT_DRIVER = custom -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes diff --git a/keyboards/duck/octagon/v1/rules.mk b/keyboards/duck/octagon/v1/rules.mk index 62c4d37caf..216a5b14cd 100644 --- a/keyboards/duck/octagon/v1/rules.mk +++ b/keyboards/duck/octagon/v1/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality BACKLIGHT_DRIVER = custom -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes diff --git a/keyboards/duck/octagon/v2/rules.mk b/keyboards/duck/octagon/v2/rules.mk index 09a363c391..455abba8ad 100644 --- a/keyboards/duck/octagon/v2/rules.mk +++ b/keyboards/duck/octagon/v2/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality BACKLIGHT_DRIVER = custom -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes diff --git a/keyboards/duck/orion/v3/rules.mk b/keyboards/duck/orion/v3/rules.mk index 5c9fa9cb81..5206228b3e 100644 --- a/keyboards/duck/orion/v3/rules.mk +++ b/keyboards/duck/orion/v3/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality BACKLIGHT_DRIVER = custom -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes diff --git a/keyboards/duck/tcv3/rules.mk b/keyboards/duck/tcv3/rules.mk index ac5e4e89a0..ecc9f56585 100644 --- a/keyboards/duck/tcv3/rules.mk +++ b/keyboards/duck/tcv3/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes diff --git a/keyboards/eco/keymaps/default/rules.mk b/keyboards/eco/keymaps/default/rules.mk index 6da87da43a..f5b5fcbc2e 100644 --- a/keyboards/eco/keymaps/default/rules.mk +++ b/keyboards/eco/keymaps/default/rules.mk @@ -13,7 +13,6 @@ NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: h BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/eco/rules.mk b/keyboards/eco/rules.mk index d05b99d7f1..5e2c0138ff 100644 --- a/keyboards/eco/rules.mk +++ b/keyboards/eco/rules.mk @@ -17,7 +17,6 @@ NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: ht BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality MIDI_ENABLE = yes # MIDI support AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/emptystring/NQG/rules.mk b/keyboards/emptystring/NQG/rules.mk index 4ff1393358..d4c6e1fcaf 100644 --- a/keyboards/emptystring/NQG/rules.mk +++ b/keyboards/emptystring/NQG/rules.mk @@ -16,5 +16,4 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/ep/40/rules.mk b/keyboards/ep/40/rules.mk index 5ecb0d59ab..66d778a952 100644 --- a/keyboards/ep/40/rules.mk +++ b/keyboards/ep/40/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/ep/96/rules.mk b/keyboards/ep/96/rules.mk index 5ecb0d59ab..66d778a952 100644 --- a/keyboards/ep/96/rules.mk +++ b/keyboards/ep/96/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/ep/comsn/hs68/rules.mk b/keyboards/ep/comsn/hs68/rules.mk index 86bb4c7592..077733ea87 100644 --- a/keyboards/ep/comsn/hs68/rules.mk +++ b/keyboards/ep/comsn/hs68/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/ep/comsn/mollydooker/rules.mk b/keyboards/ep/comsn/mollydooker/rules.mk index 7d62fd7d27..58a1405de2 100644 --- a/keyboards/ep/comsn/mollydooker/rules.mk +++ b/keyboards/ep/comsn/mollydooker/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/ep/comsn/tf_longeboye/rules.mk b/keyboards/ep/comsn/tf_longeboye/rules.mk index d1aca1f406..df18dc487e 100644 --- a/keyboards/ep/comsn/tf_longeboye/rules.mk +++ b/keyboards/ep/comsn/tf_longeboye/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/ergodash/rules.mk b/keyboards/ergodash/rules.mk index a9a9e79e06..587b0396fd 100644 --- a/keyboards/ergodash/rules.mk +++ b/keyboards/ergodash/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/ergosaurus/rules.mk b/keyboards/ergosaurus/rules.mk index add434b9f3..93b442460f 100644 --- a/keyboards/ergosaurus/rules.mk +++ b/keyboards/ergosaurus/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = alice_split_bs diff --git a/keyboards/ergoslab/rules.mk b/keyboards/ergoslab/rules.mk index daadab823d..2be04af745 100644 --- a/keyboards/ergoslab/rules.mk +++ b/keyboards/ergoslab/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/ergotravel/rules.mk b/keyboards/ergotravel/rules.mk index 2b9c4f693e..f7eb590b9f 100644 --- a/keyboards/ergotravel/rules.mk +++ b/keyboards/ergotravel/rules.mk @@ -10,7 +10,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/ericrlau/numdiscipline/rev1/rules.mk b/keyboards/ericrlau/numdiscipline/rev1/rules.mk index 6ead973dcb..49a15005c4 100644 --- a/keyboards/ericrlau/numdiscipline/rev1/rules.mk +++ b/keyboards/ericrlau/numdiscipline/rev1/rules.mk @@ -21,5 +21,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/evil80/rules.mk b/keyboards/evil80/rules.mk index d501f843b3..5020a0d3f5 100644 --- a/keyboards/evil80/rules.mk +++ b/keyboards/evil80/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/evyd13/eon40/rules.mk b/keyboards/evyd13/eon40/rules.mk index 2f60b80109..c2981962d1 100644 --- a/keyboards/evyd13/eon40/rules.mk +++ b/keyboards/evyd13/eon40/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes diff --git a/keyboards/evyd13/eon65/rules.mk b/keyboards/evyd13/eon65/rules.mk index c03d696bf8..15164058d7 100644 --- a/keyboards/evyd13/eon65/rules.mk +++ b/keyboards/evyd13/eon65/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = 65_ansi 65_ansi_blocker 65_iso 65_iso_blocker diff --git a/keyboards/evyd13/eon75/rules.mk b/keyboards/evyd13/eon75/rules.mk index e658b597c0..7a72e82b35 100644 --- a/keyboards/evyd13/eon75/rules.mk +++ b/keyboards/evyd13/eon75/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/evyd13/eon87/rules.mk b/keyboards/evyd13/eon87/rules.mk index da70a1f7e5..2f8686632b 100644 --- a/keyboards/evyd13/eon87/rules.mk +++ b/keyboards/evyd13/eon87/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = tkl_ansi tkl_iso diff --git a/keyboards/evyd13/eon95/rules.mk b/keyboards/evyd13/eon95/rules.mk index e658b597c0..7a72e82b35 100644 --- a/keyboards/evyd13/eon95/rules.mk +++ b/keyboards/evyd13/eon95/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/evyd13/minitomic/rules.mk b/keyboards/evyd13/minitomic/rules.mk index 469407d979..b30d61c867 100644 --- a/keyboards/evyd13/minitomic/rules.mk +++ b/keyboards/evyd13/minitomic/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/evyd13/mx5160/rules.mk b/keyboards/evyd13/mx5160/rules.mk index 1edc2129af..b090193a55 100644 --- a/keyboards/evyd13/mx5160/rules.mk +++ b/keyboards/evyd13/mx5160/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/evyd13/omrontkl/rules.mk b/keyboards/evyd13/omrontkl/rules.mk index 46df566b7b..37ab0dee27 100644 --- a/keyboards/evyd13/omrontkl/rules.mk +++ b/keyboards/evyd13/omrontkl/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/evyd13/plain60/rules.mk b/keyboards/evyd13/plain60/rules.mk index 80c1ac7729..d6237b3262 100644 --- a/keyboards/evyd13/plain60/rules.mk +++ b/keyboards/evyd13/plain60/rules.mk @@ -16,6 +16,5 @@ NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https:// RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no -UNICODE_ENABLE = no # Unicode LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_hhkb 60_iso 60_tsangan_hhkb diff --git a/keyboards/evyd13/wonderland/rules.mk b/keyboards/evyd13/wonderland/rules.mk index fbf5e3c856..a8f3fcc106 100644 --- a/keyboards/evyd13/wonderland/rules.mk +++ b/keyboards/evyd13/wonderland/rules.mk @@ -16,7 +16,6 @@ NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https:/ RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no -UNICODE_ENABLE = no # Unicode AUTO_SHIFT_ENABLE = no VELOCIKEY_ENABLE = yes diff --git a/keyboards/exclusive/e6v2/le/rules.mk b/keyboards/exclusive/e6v2/le/rules.mk index 8a46f7d068..9b4f420857 100644 --- a/keyboards/exclusive/e6v2/le/rules.mk +++ b/keyboards/exclusive/e6v2/le/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = 60_ansi diff --git a/keyboards/exclusive/e6v2/le_bmc/rules.mk b/keyboards/exclusive/e6v2/le_bmc/rules.mk index 6046e15c52..0b3dd40232 100644 --- a/keyboards/exclusive/e6v2/le_bmc/rules.mk +++ b/keyboards/exclusive/e6v2/le_bmc/rules.mk @@ -19,5 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality WS2812_DRIVER = i2c RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/exclusive/e6v2/oe/rules.mk b/keyboards/exclusive/e6v2/oe/rules.mk index 8a46f7d068..9b4f420857 100644 --- a/keyboards/exclusive/e6v2/oe/rules.mk +++ b/keyboards/exclusive/e6v2/oe/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = 60_ansi diff --git a/keyboards/exclusive/e6v2/oe_bmc/rules.mk b/keyboards/exclusive/e6v2/oe_bmc/rules.mk index 6046e15c52..0b3dd40232 100644 --- a/keyboards/exclusive/e6v2/oe_bmc/rules.mk +++ b/keyboards/exclusive/e6v2/oe_bmc/rules.mk @@ -19,5 +19,4 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality WS2812_DRIVER = i2c RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/felix/rules.mk b/keyboards/felix/rules.mk index e664377961..23052482e8 100644 --- a/keyboards/felix/rules.mk +++ b/keyboards/felix/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_5x4 diff --git a/keyboards/flehrad/downbubble/rules.mk b/keyboards/flehrad/downbubble/rules.mk index 9e4f6779a3..db4b61e0b5 100644 --- a/keyboards/flehrad/downbubble/rules.mk +++ b/keyboards/flehrad/downbubble/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/fleuron/rules.mk b/keyboards/fleuron/rules.mk index 7c4829206f..8e9acb3046 100644 --- a/keyboards/fleuron/rules.mk +++ b/keyboards/fleuron/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes diff --git a/keyboards/fluorite/rules.mk b/keyboards/fluorite/rules.mk index b7061f6515..dd9ff71e5e 100644 --- a/keyboards/fluorite/rules.mk +++ b/keyboards/fluorite/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD = yes diff --git a/keyboards/flx/lodestone/rules.mk b/keyboards/flx/lodestone/rules.mk index 3da7e82fc5..3a92f5019e 100644 --- a/keyboards/flx/lodestone/rules.mk +++ b/keyboards/flx/lodestone/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LTO_ENABLE = yes diff --git a/keyboards/flx/virgo/rules.mk b/keyboards/flx/virgo/rules.mk index 1a8ba031c4..e81dca4b85 100644 --- a/keyboards/flx/virgo/rules.mk +++ b/keyboards/flx/virgo/rules.mk @@ -18,6 +18,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LTO_ENABLE = yes diff --git a/keyboards/foxlab/leaf60/hotswap/rules.mk b/keyboards/foxlab/leaf60/hotswap/rules.mk index 2e17d21130..fb97faa5f0 100644 --- a/keyboards/foxlab/leaf60/hotswap/rules.mk +++ b/keyboards/foxlab/leaf60/hotswap/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/foxlab/leaf60/universal/rules.mk b/keyboards/foxlab/leaf60/universal/rules.mk index 97d1372ed3..c4bc3f9da9 100644 --- a/keyboards/foxlab/leaf60/universal/rules.mk +++ b/keyboards/foxlab/leaf60/universal/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = 60_ansi 60_hhkb diff --git a/keyboards/fractal/rules.mk b/keyboards/fractal/rules.mk index bde1891616..e559bef645 100755 --- a/keyboards/fractal/rules.mk +++ b/keyboards/fractal/rules.mk @@ -15,7 +15,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_5x12 # preonic_mit diff --git a/keyboards/geekboards/tester/rules.mk b/keyboards/geekboards/tester/rules.mk index d782f41bb8..63c594db45 100644 --- a/keyboards/geekboards/tester/rules.mk +++ b/keyboards/geekboards/tester/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output RGB_MATRIX_ENABLE = yes # Use RGB matrix RGB_MATRIX_DRIVER = IS31FL3731 diff --git a/keyboards/getta25/rules.mk b/keyboards/getta25/rules.mk index 0e60b95b90..949655634f 100644 --- a/keyboards/getta25/rules.mk +++ b/keyboards/getta25/rules.mk @@ -15,7 +15,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. OLED_ENABLE = no # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/gh60/revc/rules.mk b/keyboards/gh60/revc/rules.mk index f5194840b9..3cb2f3bebc 100644 --- a/keyboards/gh60/revc/rules.mk +++ b/keyboards/gh60/revc/rules.mk @@ -18,6 +18,5 @@ KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI support -# UNICODE_ENABLE = YES # Unicode LAYOUTS = 60_ansi 60_iso 60_ansi_split_bs_rshift 60_tsangan_hhkb diff --git a/keyboards/gh60/satan/keymaps/default/rules.mk b/keyboards/gh60/satan/keymaps/default/rules.mk index 9bd14ac70a..a8cc2fd82e 100644 --- a/keyboards/gh60/satan/keymaps/default/rules.mk +++ b/keyboards/gh60/satan/keymaps/default/rules.mk @@ -11,7 +11,5 @@ NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: ht BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend - diff --git a/keyboards/gh60/satan/rules.mk b/keyboards/gh60/satan/rules.mk index 0128ff0179..98178e17d5 100644 --- a/keyboards/gh60/satan/rules.mk +++ b/keyboards/gh60/satan/rules.mk @@ -16,6 +16,5 @@ NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: ht RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality AUDIO_ENABLE = no -UNICODE_ENABLE = no # Unicode LAYOUTS = 60_ansi 60_iso 60_ansi_split_bs_rshift diff --git a/keyboards/gingham/rules.mk b/keyboards/gingham/rules.mk index c87c3cffba..63bf46ff8f 100644 --- a/keyboards/gingham/rules.mk +++ b/keyboards/gingham/rules.mk @@ -21,7 +21,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output CUSTOM_MATRIX = lite diff --git a/keyboards/gon/nerdtkl/rules.mk b/keyboards/gon/nerdtkl/rules.mk index b7558ad55d..1450c7f451 100644 --- a/keyboards/gon/nerdtkl/rules.mk +++ b/keyboards/gon/nerdtkl/rules.mk @@ -21,5 +21,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/gray_studio/cod67/rules.mk b/keyboards/gray_studio/cod67/rules.mk index e770efbc56..54db10299c 100644 --- a/keyboards/gray_studio/cod67/rules.mk +++ b/keyboards/gray_studio/cod67/rules.mk @@ -21,5 +21,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/gray_studio/space65/rules.mk b/keyboards/gray_studio/space65/rules.mk index 113bab30e1..085a80ab92 100644 --- a/keyboards/gray_studio/space65/rules.mk +++ b/keyboards/gray_studio/space65/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = 65_ansi_blocker 65_iso_blocker diff --git a/keyboards/gray_studio/think65/hotswap/rules.mk b/keyboards/gray_studio/think65/hotswap/rules.mk index b9c622092c..b2fb6341b7 100644 --- a/keyboards/gray_studio/think65/hotswap/rules.mk +++ b/keyboards/gray_studio/think65/hotswap/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LTO_ENABLE = yes diff --git a/keyboards/gray_studio/think65/solder/rules.mk b/keyboards/gray_studio/think65/solder/rules.mk index b9c622092c..b2fb6341b7 100644 --- a/keyboards/gray_studio/think65/solder/rules.mk +++ b/keyboards/gray_studio/think65/solder/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LTO_ENABLE = yes diff --git a/keyboards/grid600/press/rules.mk b/keyboards/grid600/press/rules.mk index f7f8f51a4a..65cc989ca1 100644 --- a/keyboards/grid600/press/rules.mk +++ b/keyboards/grid600/press/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/hadron/ver2/rules.mk b/keyboards/hadron/ver2/rules.mk index 8e211be4a5..e9200d1066 100644 --- a/keyboards/hadron/ver2/rules.mk +++ b/keyboards/hadron/ver2/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. SWAP_HANDS_ENABLE = no # Enable one-hand typing diff --git a/keyboards/halberd/rules.mk b/keyboards/halberd/rules.mk index cc74a1278a..1ecd6129a5 100644 --- a/keyboards/halberd/rules.mk +++ b/keyboards/halberd/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/108key_trackpoint/rules.mk b/keyboards/handwired/108key_trackpoint/rules.mk index 9c47429b0a..bb667098f2 100644 --- a/keyboards/handwired/108key_trackpoint/rules.mk +++ b/keyboards/handwired/108key_trackpoint/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output PS2_MOUSE_ENABLE = yes PS2_USE_USART = yes diff --git a/keyboards/handwired/412_64/rules.mk b/keyboards/handwired/412_64/rules.mk index 51b6c665cd..9199b0e4f2 100644 --- a/keyboards/handwired/412_64/rules.mk +++ b/keyboards/handwired/412_64/rules.mk @@ -17,5 +17,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/42/rules.mk b/keyboards/handwired/42/rules.mk index d31cbe9a1c..3a6f75b2e3 100644 --- a/keyboards/handwired/42/rules.mk +++ b/keyboards/handwired/42/rules.mk @@ -23,7 +23,4 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode -UNICODEMAP_ENABLE = no # ^^ -UCIS_ENABLE = no # ^^ BLUETOOTH = AdafruitBLE diff --git a/keyboards/handwired/aplx2/rules.mk b/keyboards/handwired/aplx2/rules.mk index 41ce4d9fe9..85d74856dc 100644 --- a/keyboards/handwired/aplx2/rules.mk +++ b/keyboards/handwired/aplx2/rules.mk @@ -19,4 +19,3 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode diff --git a/keyboards/handwired/aranck/rules.mk b/keyboards/handwired/aranck/rules.mk index b2bae00b22..cce68f22f4 100644 --- a/keyboards/handwired/aranck/rules.mk +++ b/keyboards/handwired/aranck/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = yes # Audio output LAYOUTS = planck_mit diff --git a/keyboards/handwired/arrow_pad/rules.mk b/keyboards/handwired/arrow_pad/rules.mk index 13f7fc68d0..c32eac4d33 100644 --- a/keyboards/handwired/arrow_pad/rules.mk +++ b/keyboards/handwired/arrow_pad/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/atreus50/rules.mk b/keyboards/handwired/atreus50/rules.mk index dd66d65f29..c92a77c078 100644 --- a/keyboards/handwired/atreus50/rules.mk +++ b/keyboards/handwired/atreus50/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/handwired/bdn9_ble/rules.mk b/keyboards/handwired/bdn9_ble/rules.mk index bee9f58dff..c73855bdee 100644 --- a/keyboards/handwired/bdn9_ble/rules.mk +++ b/keyboards/handwired/bdn9_ble/rules.mk @@ -21,7 +21,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode BLUETOOTH = AdafruitBLE # Enable Bluetooth AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = no diff --git a/keyboards/handwired/boss566y/redragon_vara/rules.mk b/keyboards/handwired/boss566y/redragon_vara/rules.mk index a5f34b285a..9aee16add8 100644 --- a/keyboards/handwired/boss566y/redragon_vara/rules.mk +++ b/keyboards/handwired/boss566y/redragon_vara/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = fullsize_ansi diff --git a/keyboards/handwired/chiron/rules.mk b/keyboards/handwired/chiron/rules.mk index 8c89bbefe5..e1b53f1e92 100644 --- a/keyboards/handwired/chiron/rules.mk +++ b/keyboards/handwired/chiron/rules.mk @@ -20,7 +20,4 @@ MOUSEKEY_ENABLE = yes NKRO_ENABLE = no RGBLIGHT_ENABLE = yes SLEEP_LED_ENABLE = yes -UCIS_ENABLE = no -UNICODEMAP_ENABLE = no -UNICODE_ENABLE = no SPLIT_KEYBOARD = yes diff --git a/keyboards/handwired/cmd60/rules.mk b/keyboards/handwired/cmd60/rules.mk index c0d8645519..9f553fbce7 100644 --- a/keyboards/handwired/cmd60/rules.mk +++ b/keyboards/handwired/cmd60/rules.mk @@ -17,5 +17,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/co60/rev1/rules.mk b/keyboards/handwired/co60/rev1/rules.mk index b19481887f..01076eb7fb 100644 --- a/keyboards/handwired/co60/rev1/rules.mk +++ b/keyboards/handwired/co60/rev1/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LEADER_ENABLE = yes # Turn on leader support diff --git a/keyboards/handwired/co60/rev6/rules.mk b/keyboards/handwired/co60/rev6/rules.mk index 54f8e17029..e60d18e551 100644 --- a/keyboards/handwired/co60/rev6/rules.mk +++ b/keyboards/handwired/co60/rev6/rules.mk @@ -17,7 +17,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work AUDIO_ENABLE = no RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality -UNICODE_ENABLE = no # Unicode LEADER_ENABLE = yes LAYOUTS += 60_ansi 60_ansi_split_bs_rshift 60_iso 60_hhkb diff --git a/keyboards/handwired/co60/rev7/rules.mk b/keyboards/handwired/co60/rev7/rules.mk index 5fef429c20..b758498fe9 100644 --- a/keyboards/handwired/co60/rev7/rules.mk +++ b/keyboards/handwired/co60/rev7/rules.mk @@ -20,7 +20,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work AUDIO_ENABLE = no RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality -UNICODE_ENABLE = no # Unicode LEADER_ENABLE = yes LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_iso 60_hhkb diff --git a/keyboards/handwired/colorlice/rules.mk b/keyboards/handwired/colorlice/rules.mk index 3b7e9b904d..d7f2f5c48a 100644 --- a/keyboards/handwired/colorlice/rules.mk +++ b/keyboards/handwired/colorlice/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LTO_ENABLE = yes # Use link time optimization RGB_MATRIX_ENABLE = yes diff --git a/keyboards/handwired/dactyl_left/rules.mk b/keyboards/handwired/dactyl_left/rules.mk index c7eb1ef6b0..8c5107285f 100644 --- a/keyboards/handwired/dactyl_left/rules.mk +++ b/keyboards/handwired/dactyl_left/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/dactyl_promicro/rules.mk b/keyboards/handwired/dactyl_promicro/rules.mk index 7f8abd590c..bca7e712ab 100644 --- a/keyboards/handwired/dactyl_promicro/rules.mk +++ b/keyboards/handwired/dactyl_promicro/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/handwired/daishi/rules.mk b/keyboards/handwired/daishi/rules.mk index 833d54778c..b24281438c 100644 --- a/keyboards/handwired/daishi/rules.mk +++ b/keyboards/handwired/daishi/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend ENCODER_ENABLE = yes # Add rotary encoder support diff --git a/keyboards/handwired/datahand/rules.mk b/keyboards/handwired/datahand/rules.mk index 134d4dcf50..b2b5effef2 100644 --- a/keyboards/handwired/datahand/rules.mk +++ b/keyboards/handwired/datahand/rules.mk @@ -12,7 +12,6 @@ CONSOLE_ENABLE = yes # Console for debug(+400) COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output CUSTOM_MATRIX = yes # We definitely have a nonstandard matrix diff --git a/keyboards/handwired/ddg_56/rules.mk b/keyboards/handwired/ddg_56/rules.mk index 9263d0cba7..7524b23a98 100644 --- a/keyboards/handwired/ddg_56/rules.mk +++ b/keyboards/handwired/ddg_56/rules.mk @@ -17,4 +17,3 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = yes # Audio output -UNICODE_ENABLE = no # Unicode diff --git a/keyboards/handwired/fivethirteen/rules.mk b/keyboards/handwired/fivethirteen/rules.mk index 3fe223e9b8..9f553fbce7 100644 --- a/keyboards/handwired/fivethirteen/rules.mk +++ b/keyboards/handwired/fivethirteen/rules.mk @@ -17,6 +17,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output - diff --git a/keyboards/handwired/frenchdev/rules.mk b/keyboards/handwired/frenchdev/rules.mk index 8108956c34..258a3184d3 100644 --- a/keyboards/handwired/frenchdev/rules.mk +++ b/keyboards/handwired/frenchdev/rules.mk @@ -15,9 +15,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration CUSTOM_MATRIX = yes # Custom matrix file (taken and adapted from the ErgoDox EZ to handle custom number of columns) SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -UNICODE_ENABLE = yes # Unicode BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = no diff --git a/keyboards/handwired/fruity60/rules.mk b/keyboards/handwired/fruity60/rules.mk index 6fa9de6022..dc90e758cd 100644 --- a/keyboards/handwired/fruity60/rules.mk +++ b/keyboards/handwired/fruity60/rules.mk @@ -21,7 +21,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output BLUETOOTH = AdafruitBLE diff --git a/keyboards/handwired/gamenum/rules.mk b/keyboards/handwired/gamenum/rules.mk index 74a0446a4c..c09e23c7dc 100644 --- a/keyboards/handwired/gamenum/rules.mk +++ b/keyboards/handwired/gamenum/rules.mk @@ -17,5 +17,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/hacked_motospeed/rules.mk b/keyboards/handwired/hacked_motospeed/rules.mk index 83a3a67b12..403590921b 100644 --- a/keyboards/handwired/hacked_motospeed/rules.mk +++ b/keyboards/handwired/hacked_motospeed/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output NO_USB_STARTUP_CHECK = yes # Disable initialization only when usb is plugged in diff --git a/keyboards/handwired/heisenberg/rules.mk b/keyboards/handwired/heisenberg/rules.mk index f84fa81638..aa55581bfc 100644 --- a/keyboards/handwired/heisenberg/rules.mk +++ b/keyboards/handwired/heisenberg/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = yes # Audio output LAYOUTS = planck_mit diff --git a/keyboards/handwired/hnah40/rules.mk b/keyboards/handwired/hnah40/rules.mk index 0d17d5e8f1..e7c7843714 100644 --- a/keyboards/handwired/hnah40/rules.mk +++ b/keyboards/handwired/hnah40/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/hnah40rgb/rules.mk b/keyboards/handwired/hnah40rgb/rules.mk index f85644fb17..ebe3bc3a63 100644 --- a/keyboards/handwired/hnah40rgb/rules.mk +++ b/keyboards/handwired/hnah40rgb/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output RGB_MATRIX_ENABLE = yes RGB_MATRIX_DRIVER = WS2812 diff --git a/keyboards/handwired/ibm122m/rules.mk b/keyboards/handwired/ibm122m/rules.mk index cc47555394..d1425eff36 100644 --- a/keyboards/handwired/ibm122m/rules.mk +++ b/keyboards/handwired/ibm122m/rules.mk @@ -17,5 +17,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = yes # Audio output diff --git a/keyboards/handwired/jn68m/rules.mk b/keyboards/handwired/jn68m/rules.mk index fe3f85cc65..544ecfafc1 100644 --- a/keyboards/handwired/jn68m/rules.mk +++ b/keyboards/handwired/jn68m/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/jot50/rules.mk b/keyboards/handwired/jot50/rules.mk index 786a0f904d..a15affc1ad 100644 --- a/keyboards/handwired/jot50/rules.mk +++ b/keyboards/handwired/jot50/rules.mk @@ -17,7 +17,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/handwired/jotanck/rules.mk b/keyboards/handwired/jotanck/rules.mk index 60a766e0a3..63db50a5da 100644 --- a/keyboards/handwired/jotanck/rules.mk +++ b/keyboards/handwired/jotanck/rules.mk @@ -17,7 +17,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/handwired/jotpad16/rules.mk b/keyboards/handwired/jotpad16/rules.mk index 38df52572f..28564a10e6 100644 --- a/keyboards/handwired/jotpad16/rules.mk +++ b/keyboards/handwired/jotpad16/rules.mk @@ -17,7 +17,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/handwired/juliet/rules.mk b/keyboards/handwired/juliet/rules.mk index a42e238199..480218cffe 100644 --- a/keyboards/handwired/juliet/rules.mk +++ b/keyboards/handwired/juliet/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/k_numpad17/rules.mk b/keyboards/handwired/k_numpad17/rules.mk index 03c9c27823..dfce990dc8 100644 --- a/keyboards/handwired/k_numpad17/rules.mk +++ b/keyboards/handwired/k_numpad17/rules.mk @@ -16,6 +16,5 @@ NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https:/ RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no -UNICODE_ENABLE = no # Unicode LAYOUTS = numpad_5x4 diff --git a/keyboards/handwired/kbod/keymaps/default/rules.mk b/keyboards/handwired/kbod/keymaps/default/rules.mk index 3b1956f7fd..cfe14f46d7 100644 --- a/keyboards/handwired/kbod/keymaps/default/rules.mk +++ b/keyboards/handwired/kbod/keymaps/default/rules.mk @@ -11,6 +11,5 @@ NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: ht BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/handwired/kbod/rules.mk b/keyboards/handwired/kbod/rules.mk index c3b1ab8dba..579d200338 100644 --- a/keyboards/handwired/kbod/rules.mk +++ b/keyboards/handwired/kbod/rules.mk @@ -17,5 +17,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/magicforce61/rules.mk b/keyboards/handwired/magicforce61/rules.mk index 87e2ff948d..10f3a790a4 100644 --- a/keyboards/handwired/magicforce61/rules.mk +++ b/keyboards/handwired/magicforce61/rules.mk @@ -17,5 +17,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/magicforce68/rules.mk b/keyboards/handwired/magicforce68/rules.mk index 74a0446a4c..c09e23c7dc 100644 --- a/keyboards/handwired/magicforce68/rules.mk +++ b/keyboards/handwired/magicforce68/rules.mk @@ -17,5 +17,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/mechboards_micropad/rules.mk b/keyboards/handwired/mechboards_micropad/rules.mk index ece2e4a2f7..fb3377dd33 100644 --- a/keyboards/handwired/mechboards_micropad/rules.mk +++ b/keyboards/handwired/mechboards_micropad/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/minorca/rules.mk b/keyboards/handwired/minorca/rules.mk index a159fcb2da..f4cff6059d 100644 --- a/keyboards/handwired/minorca/rules.mk +++ b/keyboards/handwired/minorca/rules.mk @@ -19,4 +19,3 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode diff --git a/keyboards/handwired/ms_sculpt_mobile/keymaps/default/rules.mk b/keyboards/handwired/ms_sculpt_mobile/keymaps/default/rules.mk index ad5ce547d8..cca1ed9c12 100644 --- a/keyboards/handwired/ms_sculpt_mobile/keymaps/default/rules.mk +++ b/keyboards/handwired/ms_sculpt_mobile/keymaps/default/rules.mk @@ -11,6 +11,5 @@ NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: ht BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/handwired/ms_sculpt_mobile/rules.mk b/keyboards/handwired/ms_sculpt_mobile/rules.mk index c672146ab1..b9a32489aa 100644 --- a/keyboards/handwired/ms_sculpt_mobile/rules.mk +++ b/keyboards/handwired/ms_sculpt_mobile/rules.mk @@ -22,7 +22,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output # Project specific files diff --git a/keyboards/handwired/myskeeb/rules.mk b/keyboards/handwired/myskeeb/rules.mk index 10ade1f090..d8ce97a7b8 100644 --- a/keyboards/handwired/myskeeb/rules.mk +++ b/keyboards/handwired/myskeeb/rules.mk @@ -18,7 +18,6 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode SPLIT_KEYBOARD = yes # Enables split keyboard support OLED_ENABLE = yes OLED_DRIVER = SSD1306 diff --git a/keyboards/handwired/not_so_minidox/rules.mk b/keyboards/handwired/not_so_minidox/rules.mk index 8de56d204f..cc1f09dbfc 100644 --- a/keyboards/handwired/not_so_minidox/rules.mk +++ b/keyboards/handwired/not_so_minidox/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. USE_I2C = no # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/handwired/numpad20/rules.mk b/keyboards/handwired/numpad20/rules.mk index c0d8645519..9f553fbce7 100644 --- a/keyboards/handwired/numpad20/rules.mk +++ b/keyboards/handwired/numpad20/rules.mk @@ -17,5 +17,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/ortho5x13/rules.mk b/keyboards/handwired/ortho5x13/rules.mk index c0d8645519..9f553fbce7 100644 --- a/keyboards/handwired/ortho5x13/rules.mk +++ b/keyboards/handwired/ortho5x13/rules.mk @@ -17,5 +17,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/owlet60/rules.mk b/keyboards/handwired/owlet60/rules.mk index 13e4e2af7e..a0f2b1d178 100644 --- a/keyboards/handwired/owlet60/rules.mk +++ b/keyboards/handwired/owlet60/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output CUSTOM_MATRIX = yes OLED_ENABLE = no diff --git a/keyboards/handwired/pilcrow/keymaps/default/rules.mk b/keyboards/handwired/pilcrow/keymaps/default/rules.mk index ad5ce547d8..cca1ed9c12 100644 --- a/keyboards/handwired/pilcrow/keymaps/default/rules.mk +++ b/keyboards/handwired/pilcrow/keymaps/default/rules.mk @@ -11,6 +11,5 @@ NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: ht BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/handwired/pilcrow/rules.mk b/keyboards/handwired/pilcrow/rules.mk index c0d8645519..9f553fbce7 100644 --- a/keyboards/handwired/pilcrow/rules.mk +++ b/keyboards/handwired/pilcrow/rules.mk @@ -17,5 +17,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/prime_exl/rules.mk b/keyboards/handwired/prime_exl/rules.mk index 1bcd67c084..f3466bf1cc 100644 --- a/keyboards/handwired/prime_exl/rules.mk +++ b/keyboards/handwired/prime_exl/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/prime_exl_plus/rules.mk b/keyboards/handwired/prime_exl_plus/rules.mk index f671a2d2ce..99105c483c 100644 --- a/keyboards/handwired/prime_exl_plus/rules.mk +++ b/keyboards/handwired/prime_exl_plus/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/promethium/keymaps/default/rules.mk b/keyboards/handwired/promethium/keymaps/default/rules.mk index 8fea2fd136..05807b5777 100644 --- a/keyboards/handwired/promethium/keymaps/default/rules.mk +++ b/keyboards/handwired/promethium/keymaps/default/rules.mk @@ -13,7 +13,6 @@ NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: ht BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode UNICODEMAP_ENABLE = yes BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/handwired/promethium/rules.mk b/keyboards/handwired/promethium/rules.mk index b29e387f63..ec49c49b14 100644 --- a/keyboards/handwired/promethium/rules.mk +++ b/keyboards/handwired/promethium/rules.mk @@ -19,8 +19,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode -UNICODEMAP_ENABLE = yes BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. PS2_MOUSE_ENABLE = yes diff --git a/keyboards/handwired/pteron/rules.mk b/keyboards/handwired/pteron/rules.mk index 0ece061a67..e961aab6ed 100644 --- a/keyboards/handwired/pteron/rules.mk +++ b/keyboards/handwired/pteron/rules.mk @@ -16,5 +16,3 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no -UNICODE_ENABLE = no -UNICODEMAP_ENABLE = no diff --git a/keyboards/handwired/qc60/rules.mk b/keyboards/handwired/qc60/rules.mk index 916eecf15e..e7bbc0e394 100644 --- a/keyboards/handwired/qc60/rules.mk +++ b/keyboards/handwired/qc60/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SPLIT_KEYBOARD = yes diff --git a/keyboards/handwired/reddot/rules.mk b/keyboards/handwired/reddot/rules.mk index c3b1ab8dba..579d200338 100755 --- a/keyboards/handwired/reddot/rules.mk +++ b/keyboards/handwired/reddot/rules.mk @@ -17,5 +17,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/retro_refit/rules.mk b/keyboards/handwired/retro_refit/rules.mk index 129dbc9213..241bc75902 100644 --- a/keyboards/handwired/retro_refit/rules.mk +++ b/keyboards/handwired/retro_refit/rules.mk @@ -18,4 +18,3 @@ KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI support -# UNICODE_ENABLE = YES # Unicode diff --git a/keyboards/handwired/slash/rules.mk b/keyboards/handwired/slash/rules.mk index 12b08f9477..82ebd5c103 100644 --- a/keyboards/handwired/slash/rules.mk +++ b/keyboards/handwired/slash/rules.mk @@ -21,6 +21,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode BLUETOOTH = AdafruitBLE AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/splittest/rules.mk b/keyboards/handwired/splittest/rules.mk index 880c45cf9c..4b64b74253 100644 --- a/keyboards/handwired/splittest/rules.mk +++ b/keyboards/handwired/splittest/rules.mk @@ -10,7 +10,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/handwired/steamvan/rev1/rules.mk b/keyboards/handwired/steamvan/rev1/rules.mk index 3016fc5ea9..097b210821 100644 --- a/keyboards/handwired/steamvan/rev1/rules.mk +++ b/keyboards/handwired/steamvan/rev1/rules.mk @@ -20,6 +20,5 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work AUDIO_ENABLE = no RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality -UNICODE_ENABLE = no # Unicode LEADER_ENABLE = yes diff --git a/keyboards/handwired/symmetry60/rules.mk b/keyboards/handwired/symmetry60/rules.mk index 4f17a2a914..adfa79ad37 100644 --- a/keyboards/handwired/symmetry60/rules.mk +++ b/keyboards/handwired/symmetry60/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LTO_ENABLE = yes # Use link time optimization diff --git a/keyboards/handwired/tennie/rules.mk b/keyboards/handwired/tennie/rules.mk index 8b8b3d3f0b..22713268d7 100644 --- a/keyboards/handwired/tennie/rules.mk +++ b/keyboards/handwired/tennie/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/handwired/terminus_mini/keymaps/default/rules.mk b/keyboards/handwired/terminus_mini/keymaps/default/rules.mk index 60fe32dc84..8373126f78 100644 --- a/keyboards/handwired/terminus_mini/keymaps/default/rules.mk +++ b/keyboards/handwired/terminus_mini/keymaps/default/rules.mk @@ -11,7 +11,6 @@ NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: ht BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend TAP_DANCE_ENABLE = no # Enable Tap Dance diff --git a/keyboards/handwired/terminus_mini/rules.mk b/keyboards/handwired/terminus_mini/rules.mk index 20ffaa787c..59b793d889 100644 --- a/keyboards/handwired/terminus_mini/rules.mk +++ b/keyboards/handwired/terminus_mini/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/handwired/trackpoint/rules.mk b/keyboards/handwired/trackpoint/rules.mk index 130a46440c..f6272177e3 100644 --- a/keyboards/handwired/trackpoint/rules.mk +++ b/keyboards/handwired/trackpoint/rules.mk @@ -13,7 +13,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output PS2_MOUSE_ENABLE = yes diff --git a/keyboards/handwired/tritium_numpad/rules.mk b/keyboards/handwired/tritium_numpad/rules.mk index 7f16b59af5..60f075dc5e 100644 --- a/keyboards/handwired/tritium_numpad/rules.mk +++ b/keyboards/handwired/tritium_numpad/rules.mk @@ -16,6 +16,5 @@ NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https:/ RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality (+4870) BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality (+1150) AUDIO_ENABLE = no -UNICODE_ENABLE = no # Unicode LAYOUTS = numpad_6x4 ortho_6x4 diff --git a/keyboards/handwired/wulkan/rules.mk b/keyboards/handwired/wulkan/rules.mk index 5e59a5f375..85ad2b12d7 100644 --- a/keyboards/handwired/wulkan/rules.mk +++ b/keyboards/handwired/wulkan/rules.mk @@ -18,6 +18,4 @@ NKRO_ENABLE = yes # USB Nkey Rollover AUDIO_ENABLE = no RGBLIGHT_ENABLE = no LAYOUTS = ortho_4x12 -UNICODE_ENABLE = no # Unicode NO_SUSPEND_POWER_DOWN = yes -UNICODEMAP_ENABLE = no diff --git a/keyboards/handwired/xealous/rules.mk b/keyboards/handwired/xealous/rules.mk index f572bf4c95..2d23ce46da 100644 --- a/keyboards/handwired/xealous/rules.mk +++ b/keyboards/handwired/xealous/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = yes # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SPLIT_KEYBOARD = yes # Use shared split_common code SUBPROJECT_rev1 = yes diff --git a/keyboards/hecomi/alpha/rules.mk b/keyboards/hecomi/alpha/rules.mk index 4b4516b8e3..2b2ae49cc5 100644 --- a/keyboards/hecomi/alpha/rules.mk +++ b/keyboards/hecomi/alpha/rules.mk @@ -18,6 +18,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD = yes diff --git a/keyboards/hecomi/rules.mk b/keyboards/hecomi/rules.mk index ed3af5ddbb..331aaf21a2 100644 --- a/keyboards/hecomi/rules.mk +++ b/keyboards/hecomi/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD = yes diff --git a/keyboards/heliar/wm1_hotswap/rules.mk b/keyboards/heliar/wm1_hotswap/rules.mk index 81b1de1f83..c7a159b008 100644 --- a/keyboards/heliar/wm1_hotswap/rules.mk +++ b/keyboards/heliar/wm1_hotswap/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/helix/rules.mk b/keyboards/helix/rules.mk index 2e13e452a3..974081835e 100644 --- a/keyboards/helix/rules.mk +++ b/keyboards/helix/rules.mk @@ -18,7 +18,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/hhkb/ansi/rules.mk b/keyboards/hhkb/ansi/rules.mk index b0f17c93a0..3f60f47d7b 100644 --- a/keyboards/hhkb/ansi/rules.mk +++ b/keyboards/hhkb/ansi/rules.mk @@ -18,7 +18,6 @@ CUSTOM_MATRIX = yes # Custom matrix file for the HHKB # NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI support -# UNICODE_ENABLE = yes # Unicode # HHKB_RN42_ENABLE = yes # Enable support for hasu's BT alt controller -- code borrowed from tmk source tree. diff --git a/keyboards/hhkb/jp/rules.mk b/keyboards/hhkb/jp/rules.mk index 50e2c2c412..dda7ceb078 100644 --- a/keyboards/hhkb/jp/rules.mk +++ b/keyboards/hhkb/jp/rules.mk @@ -18,7 +18,6 @@ CUSTOM_MATRIX = yes # Custom matrix file for the HHKB # NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI support -# UNICODE_ENABLE = yes # Unicode # HHKB_RN42_ENABLE = yes # Enable support for hasu's BT alt controller -- code borrowed from tmk source tree. diff --git a/keyboards/hid_liber/rules.mk b/keyboards/hid_liber/rules.mk index 6e906dec7f..4e43eccc60 100755 --- a/keyboards/hid_liber/rules.mk +++ b/keyboards/hid_liber/rules.mk @@ -19,7 +19,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output # Project specific files diff --git a/keyboards/hifumi/rules.mk b/keyboards/hifumi/rules.mk index 2f0599c46a..09e9bba8c0 100644 --- a/keyboards/hifumi/rules.mk +++ b/keyboards/hifumi/rules.mk @@ -16,6 +16,5 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. SWAP_HANDS_ENABLE = no # Enable one-hand typing diff --git a/keyboards/hineybush/h87a/rules.mk b/keyboards/hineybush/h87a/rules.mk index 654426fae1..7bdbf25ef8 100644 --- a/keyboards/hineybush/h87a/rules.mk +++ b/keyboards/hineybush/h87a/rules.mk @@ -18,6 +18,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output EXTRAFLAGS += -flto diff --git a/keyboards/hineybush/h88/rules.mk b/keyboards/hineybush/h88/rules.mk index 466e1697d2..f540927f10 100644 --- a/keyboards/hineybush/h88/rules.mk +++ b/keyboards/hineybush/h88/rules.mk @@ -18,6 +18,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LTO_ENABLE = yes diff --git a/keyboards/hineybush/hbcp/rules.mk b/keyboards/hineybush/hbcp/rules.mk index acedb2a55e..0ff3c76a5b 100644 --- a/keyboards/hineybush/hbcp/rules.mk +++ b/keyboards/hineybush/hbcp/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output CUSTOM_MATRIX = lite SRC += matrix.c diff --git a/keyboards/hineybush/hineyg80/rules.mk b/keyboards/hineybush/hineyg80/rules.mk index 92e108d29d..71e5c41e74 100644 --- a/keyboards/hineybush/hineyg80/rules.mk +++ b/keyboards/hineybush/hineyg80/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/honeycomb/rules.mk b/keyboards/honeycomb/rules.mk index bda904cb41..935725a965 100755 --- a/keyboards/honeycomb/rules.mk +++ b/keyboards/honeycomb/rules.mk @@ -19,7 +19,6 @@ CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA # BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI support -UNICODE_ENABLE = YES # Unicode # # project specific files SRC += matrix.c serial_uart.c diff --git a/keyboards/hs60/v1/rules.mk b/keyboards/hs60/v1/rules.mk index 4948e082d7..fe22c20c36 100644 --- a/keyboards/hs60/v1/rules.mk +++ b/keyboards/hs60/v1/rules.mk @@ -22,7 +22,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output RGB_MATRIX_ENABLE = yes # Use RGB matrix RGB_MATRIX_DRIVER = IS31FL3731 diff --git a/keyboards/hub16/rules.mk b/keyboards/hub16/rules.mk index 4b9ae62e8f..cc5e00b9df 100755 --- a/keyboards/hub16/rules.mk +++ b/keyboards/hub16/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes # Rotary Encoder support diff --git a/keyboards/id80/rules.mk b/keyboards/id80/rules.mk index 1879ae25eb..3d810fbd98 100644 --- a/keyboards/id80/rules.mk +++ b/keyboards/id80/rules.mk @@ -21,7 +21,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output # partially generated by KBFirmware JSON to QMK Parser diff --git a/keyboards/idobo/rules.mk b/keyboards/idobo/rules.mk index 272dc4b98e..d8a55ed135 100644 --- a/keyboards/idobo/rules.mk +++ b/keyboards/idobo/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output EXTRAFLAGS += -flto # Use link time optimization diff --git a/keyboards/illuminati/is0/rules.mk b/keyboards/illuminati/is0/rules.mk index 8eee2ba5df..be4a048405 100644 --- a/keyboards/illuminati/is0/rules.mk +++ b/keyboards/illuminati/is0/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/ivy/rules.mk b/keyboards/ivy/rules.mk index b17cb9bb00..8dd1f9758e 100644 --- a/keyboards/ivy/rules.mk +++ b/keyboards/ivy/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/jc65/v32u4/rules.mk b/keyboards/jc65/v32u4/rules.mk index a9a4c89ff3..eb9d4d9ad9 100644 --- a/keyboards/jc65/v32u4/rules.mk +++ b/keyboards/jc65/v32u4/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/jd40/rules.mk b/keyboards/jd40/rules.mk index e2c5d1a82e..ec15ee641d 100644 --- a/keyboards/jd40/rules.mk +++ b/keyboards/jd40/rules.mk @@ -18,5 +18,4 @@ KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI support -# UNICODE_ENABLE = YES # Unicode RGBLIGHT_ENABLE = yes # Enable RGB Underglow diff --git a/keyboards/jd45/rules.mk b/keyboards/jd45/rules.mk index 5291265ebf..3947008ca4 100644 --- a/keyboards/jd45/rules.mk +++ b/keyboards/jd45/rules.mk @@ -17,4 +17,3 @@ COMMAND_ENABLE = yes # Commands for debug and configuration # NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality MIDI_ENABLE = yes # MIDI support -# UNICODE_ENABLE = YES # Unicode diff --git a/keyboards/jisplit89/rules.mk b/keyboards/jisplit89/rules.mk index 858b1c4c70..db807b5b43 100644 --- a/keyboards/jisplit89/rules.mk +++ b/keyboards/jisplit89/rules.mk @@ -19,7 +19,6 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode SPLIT_KEYBOARD = yes diff --git a/keyboards/jnao/rules.mk b/keyboards/jnao/rules.mk index c802f5099e..1a50c6388e 100644 --- a/keyboards/jnao/rules.mk +++ b/keyboards/jnao/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_5x12 ortho_4x12 diff --git a/keyboards/kagamidget/rules.mk b/keyboards/kagamidget/rules.mk index da19c00ba1..2368de648d 100644 --- a/keyboards/kagamidget/rules.mk +++ b/keyboards/kagamidget/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes diff --git a/keyboards/kbdfans/kbd19x/rules.mk b/keyboards/kbdfans/kbd19x/rules.mk index 4c9e6546d6..fcc43a2f73 100644 --- a/keyboards/kbdfans/kbd19x/rules.mk +++ b/keyboards/kbdfans/kbd19x/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/kbdfans/kbd4x/rules.mk b/keyboards/kbdfans/kbd4x/rules.mk index c956904bfe..2042fdeeb1 100644 --- a/keyboards/kbdfans/kbd4x/rules.mk +++ b/keyboards/kbdfans/kbd4x/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_4x12 planck_mit diff --git a/keyboards/kbdfans/kbd66/rules.mk b/keyboards/kbdfans/kbd66/rules.mk index b69c09714e..4fac790d66 100644 --- a/keyboards/kbdfans/kbd66/rules.mk +++ b/keyboards/kbdfans/kbd66/rules.mk @@ -17,5 +17,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/kbdfans/kbd67/hotswap/rules.mk b/keyboards/kbdfans/kbd67/hotswap/rules.mk index 1094747ada..f8c1fa3bfd 100644 --- a/keyboards/kbdfans/kbd67/hotswap/rules.mk +++ b/keyboards/kbdfans/kbd67/hotswap/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = 65_ansi_blocker_split_bs diff --git a/keyboards/kbdfans/kbd67/mkii_soldered/rules.mk b/keyboards/kbdfans/kbd67/mkii_soldered/rules.mk index 450c9995a0..daaaa8a531 100644 --- a/keyboards/kbdfans/kbd67/mkii_soldered/rules.mk +++ b/keyboards/kbdfans/kbd67/mkii_soldered/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = 65_ansi_blocker 65_ansi_blocker_split_bs 65_iso_blocker 65_iso_blocker_split_bs diff --git a/keyboards/kbdfans/kbd67/mkiirgb/v2/rules.mk b/keyboards/kbdfans/kbd67/mkiirgb/v2/rules.mk index 99fbca4d3e..ff4aa2ceec 100644 --- a/keyboards/kbdfans/kbd67/mkiirgb/v2/rules.mk +++ b/keyboards/kbdfans/kbd67/mkiirgb/v2/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output RGB_MATRIX_ENABLE = yes # Use RGB matrix RGB_MATRIX_DRIVER = IS31FL3731 diff --git a/keyboards/kbdfans/kbd67/rev1/rules.mk b/keyboards/kbdfans/kbd67/rev1/rules.mk index a5bac81349..e2fc5657eb 100644 --- a/keyboards/kbdfans/kbd67/rev1/rules.mk +++ b/keyboards/kbdfans/kbd67/rev1/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = 65_ansi diff --git a/keyboards/kbdfans/kbd67/rev2/rules.mk b/keyboards/kbdfans/kbd67/rev2/rules.mk index 242fcdc297..0d6de1dd93 100644 --- a/keyboards/kbdfans/kbd67/rev2/rules.mk +++ b/keyboards/kbdfans/kbd67/rev2/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = 65_ansi 65_iso 65_ansi_blocker 65_ansi_blocker_split_bs 65_ansi_split_bs diff --git a/keyboards/kbdfans/kbd6x/rules.mk b/keyboards/kbdfans/kbd6x/rules.mk index f703b6f64b..d2afc9fd2b 100644 --- a/keyboards/kbdfans/kbd6x/rules.mk +++ b/keyboards/kbdfans/kbd6x/rules.mk @@ -17,6 +17,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes AUDIO_ENABLE = no # Audio output diff --git a/keyboards/kbdfans/kbd8x_mk2/rules.mk b/keyboards/kbdfans/kbd8x_mk2/rules.mk index 9a2a91f0a6..da5b3c646e 100644 --- a/keyboards/kbdfans/kbd8x_mk2/rules.mk +++ b/keyboards/kbdfans/kbd8x_mk2/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = tkl_ansi tkl_iso diff --git a/keyboards/kbdfans/kbdpad_mk2/rules.mk b/keyboards/kbdfans/kbdpad_mk2/rules.mk index 959c706449..374998b0ef 100644 --- a/keyboards/kbdfans/kbdpad_mk2/rules.mk +++ b/keyboards/kbdfans/kbdpad_mk2/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_6x4 diff --git a/keyboards/kbdfans/maja/rules.mk b/keyboards/kbdfans/maja/rules.mk index db444a9183..6060aebcd5 100755 --- a/keyboards/kbdfans/maja/rules.mk +++ b/keyboards/kbdfans/maja/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output RGB_MATRIX_ENABLE = yes # Use RGB matrix RGB_MATRIX_DRIVER = IS31FL3731 diff --git a/keyboards/kc60se/rules.mk b/keyboards/kc60se/rules.mk index d82a0a41bc..e31f3c994b 100644 --- a/keyboards/kc60se/rules.mk +++ b/keyboards/kc60se/rules.mk @@ -16,7 +16,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_iso 60_iso_split_bs_rshift diff --git a/keyboards/keebio/bdn9/rev1/rules.mk b/keyboards/keebio/bdn9/rev1/rules.mk index 6c249fbaf4..f26e0e3422 100644 --- a/keyboards/keebio/bdn9/rev1/rules.mk +++ b/keyboards/keebio/bdn9/rev1/rules.mk @@ -18,6 +18,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes diff --git a/keyboards/keebio/bfo9000/rules.mk b/keyboards/keebio/bfo9000/rules.mk index 2c7fa1f6b9..28adef551b 100644 --- a/keyboards/keebio/bfo9000/rules.mk +++ b/keyboards/keebio/bfo9000/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/keebio/ergodicity/rules.mk b/keyboards/keebio/ergodicity/rules.mk index 42fb2f6b1d..74d3ee7830 100644 --- a/keyboards/keebio/ergodicity/rules.mk +++ b/keyboards/keebio/ergodicity/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/keebio/fourier/rules.mk b/keyboards/keebio/fourier/rules.mk index 414f735495..11b9936bfa 100644 --- a/keyboards/keebio/fourier/rules.mk +++ b/keyboards/keebio/fourier/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/keebio/iris/rev1/rules.mk b/keyboards/keebio/iris/rev1/rules.mk index 4bf3f2bf0d..2257c698e0 100644 --- a/keyboards/keebio/iris/rev1/rules.mk +++ b/keyboards/keebio/iris/rev1/rules.mk @@ -17,7 +17,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/keebio/iris/rev1_led/rules.mk b/keyboards/keebio/iris/rev1_led/rules.mk index 4bf3f2bf0d..2257c698e0 100644 --- a/keyboards/keebio/iris/rev1_led/rules.mk +++ b/keyboards/keebio/iris/rev1_led/rules.mk @@ -17,7 +17,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/keebio/iris/rev2/rules.mk b/keyboards/keebio/iris/rev2/rules.mk index 15373eed4c..bd4ea0b9f8 100644 --- a/keyboards/keebio/iris/rev2/rules.mk +++ b/keyboards/keebio/iris/rev2/rules.mk @@ -17,7 +17,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/keebio/iris/rev3/rules.mk b/keyboards/keebio/iris/rev3/rules.mk index 8d8dc05b30..c5cae9bdb7 100644 --- a/keyboards/keebio/iris/rev3/rules.mk +++ b/keyboards/keebio/iris/rev3/rules.mk @@ -17,7 +17,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/keebio/iris/rev4/rules.mk b/keyboards/keebio/iris/rev4/rules.mk index 52a2efe439..7361737d44 100644 --- a/keyboards/keebio/iris/rev4/rules.mk +++ b/keyboards/keebio/iris/rev4/rules.mk @@ -17,7 +17,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/keebio/kbo5000/rules.mk b/keyboards/keebio/kbo5000/rules.mk index d2f263ac3e..94f92befe0 100644 --- a/keyboards/keebio/kbo5000/rules.mk +++ b/keyboards/keebio/kbo5000/rules.mk @@ -15,7 +15,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/keebio/laplace/rules.mk b/keyboards/keebio/laplace/rules.mk index d19bbb8fa6..c418fcfe30 100644 --- a/keyboards/keebio/laplace/rules.mk +++ b/keyboards/keebio/laplace/rules.mk @@ -16,5 +16,4 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. diff --git a/keyboards/keebio/levinson/rules.mk b/keyboards/keebio/levinson/rules.mk index e63c48bcfe..2becb53cb9 100644 --- a/keyboards/keebio/levinson/rules.mk +++ b/keyboards/keebio/levinson/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/keebio/nyquist/rev1/rules.mk b/keyboards/keebio/nyquist/rev1/rules.mk index d446cecadd..a66fb8ae50 100644 --- a/keyboards/keebio/nyquist/rev1/rules.mk +++ b/keyboards/keebio/nyquist/rev1/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/keebio/nyquist/rev2/rules.mk b/keyboards/keebio/nyquist/rev2/rules.mk index 5a626cc84a..a1a79e240c 100644 --- a/keyboards/keebio/nyquist/rev2/rules.mk +++ b/keyboards/keebio/nyquist/rev2/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/keebio/nyquist/rev3/rules.mk b/keyboards/keebio/nyquist/rev3/rules.mk index d0eae1163c..7082185900 100644 --- a/keyboards/keebio/nyquist/rev3/rules.mk +++ b/keyboards/keebio/nyquist/rev3/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/keebio/quefrency/rules.mk b/keyboards/keebio/quefrency/rules.mk index e85432002e..483a85c75f 100644 --- a/keyboards/keebio/quefrency/rules.mk +++ b/keyboards/keebio/quefrency/rules.mk @@ -9,7 +9,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/keebio/rorschach/rules.mk b/keyboards/keebio/rorschach/rules.mk index b21e1ba57b..0a2282fb3a 100644 --- a/keyboards/keebio/rorschach/rules.mk +++ b/keyboards/keebio/rorschach/rules.mk @@ -12,7 +12,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/keebio/sinc/rules.mk b/keyboards/keebio/sinc/rules.mk index a9b4978964..7b9f99e1d9 100644 --- a/keyboards/keebio/sinc/rules.mk +++ b/keyboards/keebio/sinc/rules.mk @@ -15,7 +15,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/keebio/tragicforce68/rules.mk b/keyboards/keebio/tragicforce68/rules.mk index d921e02702..62c7cb8d29 100644 --- a/keyboards/keebio/tragicforce68/rules.mk +++ b/keyboards/keebio/tragicforce68/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = 68_ansi diff --git a/keyboards/keebio/tukey/rules.mk b/keyboards/keebio/tukey/rules.mk index 0f53969e28..b9377da068 100644 --- a/keyboards/keebio/tukey/rules.mk +++ b/keyboards/keebio/tukey/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/keebio/viterbi/rules.mk b/keyboards/keebio/viterbi/rules.mk index ba27d41538..a9db70c30c 100644 --- a/keyboards/keebio/viterbi/rules.mk +++ b/keyboards/keebio/viterbi/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/keebio/wavelet/rules.mk b/keyboards/keebio/wavelet/rules.mk index 1329df5d82..9a44b8f416 100644 --- a/keyboards/keebio/wavelet/rules.mk +++ b/keyboards/keebio/wavelet/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/keyboardio/model01/rules.mk b/keyboards/keyboardio/model01/rules.mk index bf5834fb11..2ede72a22e 100644 --- a/keyboards/keyboardio/model01/rules.mk +++ b/keyboards/keyboardio/model01/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -UNICODE_ENABLE = no # Unicode CUSTOM_MATRIX = yes QUANTUM_LIB_SRC += i2c_master.c diff --git a/keyboards/keyhive/maypad/rules.mk b/keyboards/keyhive/maypad/rules.mk index 31107f07a4..c683a6ed52 100644 --- a/keyboards/keyhive/maypad/rules.mk +++ b/keyboards/keyhive/maypad/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_5x4 numpad_5x4 diff --git a/keyboards/kinesis/keymaps/default/rules.mk b/keyboards/kinesis/keymaps/default/rules.mk index 22af51a29e..177a98c80f 100644 --- a/keyboards/kinesis/keymaps/default/rules.mk +++ b/keyboards/kinesis/keymaps/default/rules.mk @@ -11,7 +11,6 @@ NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: ht BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/kinesis/keymaps/default_pretty/rules.mk b/keyboards/kinesis/keymaps/default_pretty/rules.mk index 22af51a29e..177a98c80f 100644 --- a/keyboards/kinesis/keymaps/default_pretty/rules.mk +++ b/keyboards/kinesis/keymaps/default_pretty/rules.mk @@ -11,7 +11,6 @@ NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: ht BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/kinesis/rules.mk b/keyboards/kinesis/rules.mk index 94d6fb9f21..9722f13046 100644 --- a/keyboards/kinesis/rules.mk +++ b/keyboards/kinesis/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output DEFAULT_FOLDER = kinesis/alvicstep diff --git a/keyboards/kingly_keys/romac_plus/rules.mk b/keyboards/kingly_keys/romac_plus/rules.mk index 00c841dc9a..a50b64bc44 100644 --- a/keyboards/kingly_keys/romac_plus/rules.mk +++ b/keyboards/kingly_keys/romac_plus/rules.mk @@ -16,7 +16,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes # Enable support for EC11 Rotary Encoder OLED_ENABLE = yes diff --git a/keyboards/kingly_keys/ropro/rules.mk b/keyboards/kingly_keys/ropro/rules.mk index 83ae063601..dec33ae42e 100644 --- a/keyboards/kingly_keys/ropro/rules.mk +++ b/keyboards/kingly_keys/ropro/rules.mk @@ -15,7 +15,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes RGBLIGHT_ENABLE = yes diff --git a/keyboards/kingly_keys/soap/rules.mk b/keyboards/kingly_keys/soap/rules.mk index a6bda5608f..71a2905f09 100644 --- a/keyboards/kingly_keys/soap/rules.mk +++ b/keyboards/kingly_keys/soap/rules.mk @@ -15,7 +15,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes RGBLIGHT_ENABLE = yes diff --git a/keyboards/kira75/rules.mk b/keyboards/kira75/rules.mk index dff0c4b5ba..6d2a677b16 100644 --- a/keyboards/kira75/rules.mk +++ b/keyboards/kira75/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/kmac/rules.mk b/keyboards/kmac/rules.mk index ba15e1d37b..517218cde5 100644 --- a/keyboards/kmac/rules.mk +++ b/keyboards/kmac/rules.mk @@ -22,7 +22,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality BACKLIGHT_DRIVER = custom -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output # Project specific files diff --git a/keyboards/kmini/rules.mk b/keyboards/kmini/rules.mk index 0692b55f0c..1b67bd5dde 100755 --- a/keyboards/kmini/rules.mk +++ b/keyboards/kmini/rules.mk @@ -21,7 +21,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output # Project specific files diff --git a/keyboards/knops/mini/rules.mk b/keyboards/knops/mini/rules.mk index 4b31085728..0a1934706c 100644 --- a/keyboards/knops/mini/rules.mk +++ b/keyboards/knops/mini/rules.mk @@ -17,5 +17,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/kona_classic/keymaps/ansi/rules.mk b/keyboards/kona_classic/keymaps/ansi/rules.mk index 3d342acc8f..cb76c350e4 100644 --- a/keyboards/kona_classic/keymaps/ansi/rules.mk +++ b/keyboards/kona_classic/keymaps/ansi/rules.mk @@ -27,7 +27,6 @@ NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: ht BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI support AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/kona_classic/keymaps/ansi_arrows/rules.mk b/keyboards/kona_classic/keymaps/ansi_arrows/rules.mk index 3d342acc8f..cb76c350e4 100644 --- a/keyboards/kona_classic/keymaps/ansi_arrows/rules.mk +++ b/keyboards/kona_classic/keymaps/ansi_arrows/rules.mk @@ -27,7 +27,6 @@ NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: ht BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI support AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/kona_classic/keymaps/ansi_arrows_lcap/rules.mk b/keyboards/kona_classic/keymaps/ansi_arrows_lcap/rules.mk index 3d342acc8f..cb76c350e4 100644 --- a/keyboards/kona_classic/keymaps/ansi_arrows_lcap/rules.mk +++ b/keyboards/kona_classic/keymaps/ansi_arrows_lcap/rules.mk @@ -27,7 +27,6 @@ NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: ht BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI support AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/kona_classic/keymaps/ansi_split/rules.mk b/keyboards/kona_classic/keymaps/ansi_split/rules.mk index 3d342acc8f..cb76c350e4 100644 --- a/keyboards/kona_classic/keymaps/ansi_split/rules.mk +++ b/keyboards/kona_classic/keymaps/ansi_split/rules.mk @@ -27,7 +27,6 @@ NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: ht BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI support AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/kona_classic/keymaps/ansi_split_arrows/rules.mk b/keyboards/kona_classic/keymaps/ansi_split_arrows/rules.mk index 3d342acc8f..cb76c350e4 100644 --- a/keyboards/kona_classic/keymaps/ansi_split_arrows/rules.mk +++ b/keyboards/kona_classic/keymaps/ansi_split_arrows/rules.mk @@ -27,7 +27,6 @@ NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: ht BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI support AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/kona_classic/keymaps/default/rules.mk b/keyboards/kona_classic/keymaps/default/rules.mk index 3d342acc8f..cb76c350e4 100644 --- a/keyboards/kona_classic/keymaps/default/rules.mk +++ b/keyboards/kona_classic/keymaps/default/rules.mk @@ -27,7 +27,6 @@ NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: ht BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI support AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/kona_classic/keymaps/iso/rules.mk b/keyboards/kona_classic/keymaps/iso/rules.mk index 3d342acc8f..cb76c350e4 100644 --- a/keyboards/kona_classic/keymaps/iso/rules.mk +++ b/keyboards/kona_classic/keymaps/iso/rules.mk @@ -27,7 +27,6 @@ NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: ht BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI support AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/kona_classic/keymaps/iso_arrows/rules.mk b/keyboards/kona_classic/keymaps/iso_arrows/rules.mk index 3d342acc8f..cb76c350e4 100644 --- a/keyboards/kona_classic/keymaps/iso_arrows/rules.mk +++ b/keyboards/kona_classic/keymaps/iso_arrows/rules.mk @@ -27,7 +27,6 @@ NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: ht BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI support AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/kona_classic/keymaps/iso_split/rules.mk b/keyboards/kona_classic/keymaps/iso_split/rules.mk index 3d342acc8f..cb76c350e4 100644 --- a/keyboards/kona_classic/keymaps/iso_split/rules.mk +++ b/keyboards/kona_classic/keymaps/iso_split/rules.mk @@ -27,7 +27,6 @@ NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: ht BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI support AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/kona_classic/keymaps/iso_split_arrows/rules.mk b/keyboards/kona_classic/keymaps/iso_split_arrows/rules.mk index 3d342acc8f..cb76c350e4 100644 --- a/keyboards/kona_classic/keymaps/iso_split_arrows/rules.mk +++ b/keyboards/kona_classic/keymaps/iso_split_arrows/rules.mk @@ -27,7 +27,6 @@ NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: ht BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI support AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/kona_classic/rules.mk b/keyboards/kona_classic/rules.mk index fdb29e65c7..f03e4cf375 100644 --- a/keyboards/kona_classic/rules.mk +++ b/keyboards/kona_classic/rules.mk @@ -17,5 +17,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/kprepublic/bm16a/rules.mk b/keyboards/kprepublic/bm16a/rules.mk index 3379624f90..e84abc2a42 100644 --- a/keyboards/kprepublic/bm16a/rules.mk +++ b/keyboards/kprepublic/bm16a/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_4x4 diff --git a/keyboards/kprepublic/bm43a/rules.mk b/keyboards/kprepublic/bm43a/rules.mk index 86bb4c7592..077733ea87 100644 --- a/keyboards/kprepublic/bm43a/rules.mk +++ b/keyboards/kprepublic/bm43a/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/kprepublic/bm60rgb/rules.mk b/keyboards/kprepublic/bm60rgb/rules.mk index e147a36b86..674bbe69b9 100644 --- a/keyboards/kprepublic/bm60rgb/rules.mk +++ b/keyboards/kprepublic/bm60rgb/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output RGB_MATRIX_ENABLE = yes RGB_MATRIX_DRIVER = WS2812 diff --git a/keyboards/kprepublic/jj40/rules.mk b/keyboards/kprepublic/jj40/rules.mk index 6d4734ffb2..881829fb4c 100644 --- a/keyboards/kprepublic/jj40/rules.mk +++ b/keyboards/kprepublic/jj40/rules.mk @@ -19,7 +19,6 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow WS2812_DRIVER = i2c -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_4x12 planck_mit diff --git a/keyboards/kprepublic/jj4x4/rules.mk b/keyboards/kprepublic/jj4x4/rules.mk index e68ab710b0..751ed9dedb 100644 --- a/keyboards/kprepublic/jj4x4/rules.mk +++ b/keyboards/kprepublic/jj4x4/rules.mk @@ -19,7 +19,6 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow WS2812_DRIVER = i2c -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_4x4 diff --git a/keyboards/ktec/staryu/rules.mk b/keyboards/ktec/staryu/rules.mk index b7c947b4f3..3ae6f05072 100755 --- a/keyboards/ktec/staryu/rules.mk +++ b/keyboards/ktec/staryu/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/kudox/rules.mk b/keyboards/kudox/rules.mk index a257aedd76..fc6c624009 100644 --- a/keyboards/kudox/rules.mk +++ b/keyboards/kudox/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. diff --git a/keyboards/kudox_game/rules.mk b/keyboards/kudox_game/rules.mk index 75920e83e1..25d13a4500 100644 --- a/keyboards/kudox_game/rules.mk +++ b/keyboards/kudox_game/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/laptreus/rules.mk b/keyboards/laptreus/rules.mk index f71fa588b3..5fb166761f 100644 --- a/keyboards/laptreus/rules.mk +++ b/keyboards/laptreus/rules.mk @@ -18,7 +18,6 @@ CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work #BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode KEY_LOCK_ENABLE = no # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/launchpad/rules.mk b/keyboards/launchpad/rules.mk index b040974fa3..00deb42bf1 100644 --- a/keyboards/launchpad/rules.mk +++ b/keyboards/launchpad/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/lets_split/rules.mk b/keyboards/lets_split/rules.mk index b8ba2a7ae7..83f9665ca2 100644 --- a/keyboards/lets_split/rules.mk +++ b/keyboards/lets_split/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/lets_split_eh/rules.mk b/keyboards/lets_split_eh/rules.mk index 7b883bd487..7df89d9e10 100644 --- a/keyboards/lets_split_eh/rules.mk +++ b/keyboards/lets_split_eh/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SPLIT_KEYBOARD = yes diff --git a/keyboards/lfkeyboards/lfk78/rules.mk b/keyboards/lfkeyboards/lfk78/rules.mk index 328fe1fb98..7919543734 100644 --- a/keyboards/lfkeyboards/lfk78/rules.mk +++ b/keyboards/lfkeyboards/lfk78/rules.mk @@ -13,7 +13,6 @@ NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality BACKLIGHT_DRIVER = custom AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lfkeyboards, not qmk base SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend diff --git a/keyboards/lfkeyboards/lfk87/keymaps/default/rules.mk b/keyboards/lfkeyboards/lfk87/keymaps/default/rules.mk index b914a58ee8..a08a652dd8 100644 --- a/keyboards/lfkeyboards/lfk87/keymaps/default/rules.mk +++ b/keyboards/lfkeyboards/lfk87/keymaps/default/rules.mk @@ -12,7 +12,6 @@ NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = yes # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable RGB underlight RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lefkeyboards, not WS2812 SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend diff --git a/keyboards/lfkeyboards/lfk87/keymaps/iso/rules.mk b/keyboards/lfkeyboards/lfk87/keymaps/iso/rules.mk index db2b6c31a3..8a89dab671 100644 --- a/keyboards/lfkeyboards/lfk87/keymaps/iso/rules.mk +++ b/keyboards/lfkeyboards/lfk87/keymaps/iso/rules.mk @@ -12,7 +12,6 @@ NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = yes # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable RGB underlight RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lefkeyboards, not WS2812 SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend diff --git a/keyboards/lfkeyboards/lfk87/rules.mk b/keyboards/lfkeyboards/lfk87/rules.mk index aed5c8551e..afe1aef59d 100644 --- a/keyboards/lfkeyboards/lfk87/rules.mk +++ b/keyboards/lfkeyboards/lfk87/rules.mk @@ -33,7 +33,6 @@ NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality BACKLIGHT_DRIVER = custom AUDIO_ENABLE = yes # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable RGB underlight RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lefkeyboards, not WS2812 SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend diff --git a/keyboards/lfkeyboards/lfkpad/rules.mk b/keyboards/lfkeyboards/lfkpad/rules.mk index 7de23ce90c..3499ebb519 100644 --- a/keyboards/lfkeyboards/lfkpad/rules.mk +++ b/keyboards/lfkeyboards/lfkpad/rules.mk @@ -20,7 +20,6 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lfkeyboards, not qmk base AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode ISSI_ENABLE = yes # If the I2C pullup resistors aren't installed this must be disabled WATCHDOG_ENABLE = no # Resets keyboard if matrix_scan() isn't run every 250ms diff --git a/keyboards/lfkeyboards/mini1800/keymaps/default/rules.mk b/keyboards/lfkeyboards/mini1800/keymaps/default/rules.mk index b96ab7377c..f5cebe7078 100644 --- a/keyboards/lfkeyboards/mini1800/keymaps/default/rules.mk +++ b/keyboards/lfkeyboards/mini1800/keymaps/default/rules.mk @@ -12,7 +12,6 @@ NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = yes # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable RGB underlight RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lefkeyboards, not WS2812 SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend diff --git a/keyboards/lily58/keymaps/default/rules.mk b/keyboards/lily58/keymaps/default/rules.mk index 8ada44bfee..be19dcf14c 100644 --- a/keyboards/lily58/keymaps/default/rules.mk +++ b/keyboards/lily58/keymaps/default/rules.mk @@ -11,7 +11,6 @@ NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: ht BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SWAP_HANDS_ENABLE = no # Enable one-hand typing OLED_ENABLE= yes # OLED display diff --git a/keyboards/lily58/rules.mk b/keyboards/lily58/rules.mk index 740bc79b53..f11904c49a 100644 --- a/keyboards/lily58/rules.mk +++ b/keyboards/lily58/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/massdrop/alt/rules.mk b/keyboards/massdrop/alt/rules.mk index e9014e3c0d..e8a3a06541 100644 --- a/keyboards/massdrop/alt/rules.mk +++ b/keyboards/massdrop/alt/rules.mk @@ -19,7 +19,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output VIRTSER_ENABLE = no # USB Serial Driver RAW_ENABLE = no # Raw device diff --git a/keyboards/massdrop/ctrl/rules.mk b/keyboards/massdrop/ctrl/rules.mk index eee9069706..772d06ec0a 100644 --- a/keyboards/massdrop/ctrl/rules.mk +++ b/keyboards/massdrop/ctrl/rules.mk @@ -19,7 +19,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output VIRTSER_ENABLE = no # USB Serial Driver RAW_ENABLE = no # Raw device diff --git a/keyboards/maxipad/rules.mk b/keyboards/maxipad/rules.mk index 2376600f3c..7e7c086c45 100644 --- a/keyboards/maxipad/rules.mk +++ b/keyboards/maxipad/rules.mk @@ -12,7 +12,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output DEFAULT_FOLDER = maxipad/promicro diff --git a/keyboards/maxr1998/phoebe/rules.mk b/keyboards/maxr1998/phoebe/rules.mk index f7ef7ab728..04b1d031a2 100644 --- a/keyboards/maxr1998/phoebe/rules.mk +++ b/keyboards/maxr1998/phoebe/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. KEY_LOCK_ENABLE = yes LEADER_ENABLE = yes # Enable leader key diff --git a/keyboards/maxr1998/pulse4k/rules.mk b/keyboards/maxr1998/pulse4k/rules.mk index 2a937bec63..af6a9458be 100644 --- a/keyboards/maxr1998/pulse4k/rules.mk +++ b/keyboards/maxr1998/pulse4k/rules.mk @@ -18,6 +18,5 @@ COMBO_ENABLE = yes # Key combo feature NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/mechkeys/mk60/rules.mk b/keyboards/mechkeys/mk60/rules.mk index 2e17d21130..fb97faa5f0 100644 --- a/keyboards/mechkeys/mk60/rules.mk +++ b/keyboards/mechkeys/mk60/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/mechlovin/hannah910/rev1/rules.mk b/keyboards/mechlovin/hannah910/rev1/rules.mk index 07349c2f75..f459626422 100644 --- a/keyboards/mechlovin/hannah910/rev1/rules.mk +++ b/keyboards/mechlovin/hannah910/rev1/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/meishi/rules.mk b/keyboards/meishi/rules.mk index ec207ad3ff..0f5e7479f6 100644 --- a/keyboards/meishi/rules.mk +++ b/keyboards/meishi/rules.mk @@ -17,5 +17,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/meishi2/rules.mk b/keyboards/meishi2/rules.mk index 8fde4f64f1..0099557cbe 100644 --- a/keyboards/meishi2/rules.mk +++ b/keyboards/meishi2/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/meme/rules.mk b/keyboards/meme/rules.mk index b22c8dd991..9008320b15 100644 --- a/keyboards/meme/rules.mk +++ b/keyboards/meme/rules.mk @@ -17,5 +17,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/meson/rules.mk b/keyboards/meson/rules.mk index de896f1973..3b3aa04ba6 100644 --- a/keyboards/meson/rules.mk +++ b/keyboards/meson/rules.mk @@ -19,5 +19,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/miniaxe/rules.mk b/keyboards/miniaxe/rules.mk index 03fc910d35..b501d791b1 100644 --- a/keyboards/miniaxe/rules.mk +++ b/keyboards/miniaxe/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output DEBUG_ENABLE = no diff --git a/keyboards/mint60/rules.mk b/keyboards/mint60/rules.mk index cc98a5dd9d..cda78154a6 100644 --- a/keyboards/mint60/rules.mk +++ b/keyboards/mint60/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD = yes diff --git a/keyboards/miuni32/rules.mk b/keyboards/miuni32/rules.mk index a4b3bef7b1..a8a8ce7af8 100644 --- a/keyboards/miuni32/rules.mk +++ b/keyboards/miuni32/rules.mk @@ -17,6 +17,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes diff --git a/keyboards/monstargear/xo87/rgb/rules.mk b/keyboards/monstargear/xo87/rgb/rules.mk index c1ec8e0835..dcb663e8fd 100644 --- a/keyboards/monstargear/xo87/rgb/rules.mk +++ b/keyboards/monstargear/xo87/rgb/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output RGB_MATRIX_ENABLE = yes RGB_MATRIX_DRIVER = WS2812 diff --git a/keyboards/moon/rules.mk b/keyboards/moon/rules.mk index a7f830bdd2..df5135333b 100644 --- a/keyboards/moon/rules.mk +++ b/keyboards/moon/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output # custom matrix setup diff --git a/keyboards/mt40/rules.mk b/keyboards/mt40/rules.mk index 68e8d09ab1..8df082b02c 100644 --- a/keyboards/mt40/rules.mk +++ b/keyboards/mt40/rules.mk @@ -13,7 +13,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ # nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. WS2812_DRIVER = i2c diff --git a/keyboards/nafuda/rules.mk b/keyboards/nafuda/rules.mk index e2c48f3760..6ef5d58b1a 100644 --- a/keyboards/nafuda/rules.mk +++ b/keyboards/nafuda/rules.mk @@ -15,7 +15,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. OLED_ENABLE = no # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/naked64/rules.mk b/keyboards/naked64/rules.mk index ae6a1b69b4..fc417211cf 100644 --- a/keyboards/naked64/rules.mk +++ b/keyboards/naked64/rules.mk @@ -15,7 +15,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. OLED_ENABLE = no USE_I2C = no diff --git a/keyboards/namecard2x4/rules.mk b/keyboards/namecard2x4/rules.mk index 8cb73fc114..a7f2822ce5 100644 --- a/keyboards/namecard2x4/rules.mk +++ b/keyboards/namecard2x4/rules.mk @@ -17,10 +17,8 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output -#UNICODEMAP_ENABLE = yes # for emoji user #RGBLIGHT_ENABLE = yes # uncomment if you want addressable led strips DEFAULT_FOLDER = namecard2x4/rev2 diff --git a/keyboards/navi10/rev0/rules.mk b/keyboards/navi10/rev0/rules.mk index 8901cf62f8..1aea059dc1 100644 --- a/keyboards/navi10/rev0/rules.mk +++ b/keyboards/navi10/rev0/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/navi10/rev2/rules.mk b/keyboards/navi10/rev2/rules.mk index 8901cf62f8..1aea059dc1 100644 --- a/keyboards/navi10/rev2/rules.mk +++ b/keyboards/navi10/rev2/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/navi10/rev3/rules.mk b/keyboards/navi10/rev3/rules.mk index 8901cf62f8..1aea059dc1 100644 --- a/keyboards/navi10/rev3/rules.mk +++ b/keyboards/navi10/rev3/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/nek_type_a/rules.mk b/keyboards/nek_type_a/rules.mk index 91b2e32004..55baa97712 100644 --- a/keyboards/nek_type_a/rules.mk +++ b/keyboards/nek_type_a/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output CUSTOM_MATRIX = yes diff --git a/keyboards/nightmare/rules.mk b/keyboards/nightmare/rules.mk index 86bb4c7592..077733ea87 100644 --- a/keyboards/nightmare/rules.mk +++ b/keyboards/nightmare/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/niu_mini/rules.mk b/keyboards/niu_mini/rules.mk index 3a5ec5f68c..38d3e225aa 100644 --- a/keyboards/niu_mini/rules.mk +++ b/keyboards/niu_mini/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/nomu30/rev1/rules.mk b/keyboards/nomu30/rev1/rules.mk index 6153a4a615..f7d33ff70a 100644 --- a/keyboards/nomu30/rev1/rules.mk +++ b/keyboards/nomu30/rev1/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/noxary/220/rules.mk b/keyboards/noxary/220/rules.mk index 1fd873d1da..04660de94a 100644 --- a/keyboards/noxary/220/rules.mk +++ b/keyboards/noxary/220/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = ortho_6x4 diff --git a/keyboards/noxary/260/rules.mk b/keyboards/noxary/260/rules.mk index 0b59b05301..f3c72a4c40 100644 --- a/keyboards/noxary/260/rules.mk +++ b/keyboards/noxary/260/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output EXTRAFLAGS += -flto diff --git a/keyboards/noxary/268/rules.mk b/keyboards/noxary/268/rules.mk index cb1e5c3e18..6785f2fb50 100644 --- a/keyboards/noxary/268/rules.mk +++ b/keyboards/noxary/268/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/noxary/268_2/rules.mk b/keyboards/noxary/268_2/rules.mk index 07364ca8b7..4236ca3806 100644 --- a/keyboards/noxary/268_2/rules.mk +++ b/keyboards/noxary/268_2/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = 65_ansi_blocker diff --git a/keyboards/noxary/280/rules.mk b/keyboards/noxary/280/rules.mk index cb1e5c3e18..6785f2fb50 100644 --- a/keyboards/noxary/280/rules.mk +++ b/keyboards/noxary/280/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/noxary/x268/rules.mk b/keyboards/noxary/x268/rules.mk index 4c9e6546d6..fcc43a2f73 100644 --- a/keyboards/noxary/x268/rules.mk +++ b/keyboards/noxary/x268/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/ok60/rules.mk b/keyboards/ok60/rules.mk index 1b6a9b6cd5..cf59531458 100644 --- a/keyboards/ok60/rules.mk +++ b/keyboards/ok60/rules.mk @@ -17,6 +17,5 @@ NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https: BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable the RGB backlight MIDI_ENABLE = no # MIDI support -# UNICODE_ENABLE = YES # Unicode LAYOUTS = 60_ansi 60_iso 60_hhkb diff --git a/keyboards/org60/rules.mk b/keyboards/org60/rules.mk index e27e158ef2..35de172038 100644 --- a/keyboards/org60/rules.mk +++ b/keyboards/org60/rules.mk @@ -15,6 +15,5 @@ MOUSEKEY_ENABLE = yes # Mouse keys NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -UNICODE_ENABLE = no # Unicode LAYOUTS = 60_ansi diff --git a/keyboards/ortho5by12/rules.mk b/keyboards/ortho5by12/rules.mk index 645e99bec3..0712246c02 100644 --- a/keyboards/ortho5by12/rules.mk +++ b/keyboards/ortho5by12/rules.mk @@ -18,6 +18,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS_HAS_RGB = no diff --git a/keyboards/orthodox/rules.mk b/keyboards/orthodox/rules.mk index 96fa8b33dc..7a8c4f9488 100644 --- a/keyboards/orthodox/rules.mk +++ b/keyboards/orthodox/rules.mk @@ -13,7 +13,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/otaku_split/rev0/rules.mk b/keyboards/otaku_split/rev0/rules.mk index 6f20c13a39..bd1b93c5c8 100644 --- a/keyboards/otaku_split/rev0/rules.mk +++ b/keyboards/otaku_split/rev0/rules.mk @@ -18,6 +18,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD=yes diff --git a/keyboards/otaku_split/rev1/rules.mk b/keyboards/otaku_split/rev1/rules.mk index 6f20c13a39..bd1b93c5c8 100644 --- a/keyboards/otaku_split/rev1/rules.mk +++ b/keyboards/otaku_split/rev1/rules.mk @@ -18,6 +18,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD=yes diff --git a/keyboards/pdxkbc/rules.mk b/keyboards/pdxkbc/rules.mk index 92e108d29d..71e5c41e74 100644 --- a/keyboards/pdxkbc/rules.mk +++ b/keyboards/pdxkbc/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/percent/booster/rules.mk b/keyboards/percent/booster/rules.mk index cf1cd9cea6..388026dfcb 100644 --- a/keyboards/percent/booster/rules.mk +++ b/keyboards/percent/booster/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output EXTRAFLAGS += -flto diff --git a/keyboards/pico/rules.mk b/keyboards/pico/rules.mk index 7f6bb76c85..fc4eaf4196 100644 --- a/keyboards/pico/rules.mk +++ b/keyboards/pico/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. diff --git a/keyboards/planck/light/rules.mk b/keyboards/planck/light/rules.mk index 74705c452e..afd75a5fb6 100644 --- a/keyboards/planck/light/rules.mk +++ b/keyboards/planck/light/rules.mk @@ -17,7 +17,6 @@ NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: h BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = yes # MIDI support AUDIO_ENABLE = yes # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. RGB_MATRIX_ENABLE = yes RGB_MATRIX_DRIVER = IS31FL3731 diff --git a/keyboards/planck/rev1/rules.mk b/keyboards/planck/rev1/rules.mk index 5669b906cc..63645c35a6 100644 --- a/keyboards/planck/rev1/rules.mk +++ b/keyboards/planck/rev1/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/planck/rev2/rules.mk b/keyboards/planck/rev2/rules.mk index 5669b906cc..63645c35a6 100644 --- a/keyboards/planck/rev2/rules.mk +++ b/keyboards/planck/rev2/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/planck/rev3/rules.mk b/keyboards/planck/rev3/rules.mk index 5669b906cc..63645c35a6 100644 --- a/keyboards/planck/rev3/rules.mk +++ b/keyboards/planck/rev3/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/planck/rev4/rules.mk b/keyboards/planck/rev4/rules.mk index 0ffb0a1856..dbabe1bf25 100644 --- a/keyboards/planck/rev4/rules.mk +++ b/keyboards/planck/rev4/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = yes # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/planck/rev5/rules.mk b/keyboards/planck/rev5/rules.mk index ff4fee3860..edba079eaa 100644 --- a/keyboards/planck/rev5/rules.mk +++ b/keyboards/planck/rev5/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = yes # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/planck/rev6/rules.mk b/keyboards/planck/rev6/rules.mk index dae2116035..6150d5d1ce 100644 --- a/keyboards/planck/rev6/rules.mk +++ b/keyboards/planck/rev6/rules.mk @@ -17,7 +17,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = yes # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. WS2812_DRIVER = pwm diff --git a/keyboards/ploopyco/mouse/rules.mk b/keyboards/ploopyco/mouse/rules.mk index 0f66f5628c..20b96abab4 100644 --- a/keyboards/ploopyco/mouse/rules.mk +++ b/keyboards/ploopyco/mouse/rules.mk @@ -20,7 +20,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output POINTING_DEVICE_ENABLE = yes MOUSEKEY_ENABLE = yes # Mouse keys diff --git a/keyboards/ploopyco/trackball/rules.mk b/keyboards/ploopyco/trackball/rules.mk index 1cf9a01fc0..9b7285a015 100644 --- a/keyboards/ploopyco/trackball/rules.mk +++ b/keyboards/ploopyco/trackball/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output POINTING_DEVICE_ENABLE = yes MOUSEKEY_ENABLE = yes # Mouse keys diff --git a/keyboards/ploopyco/trackball_mini/rules.mk b/keyboards/ploopyco/trackball_mini/rules.mk index 8b4ef3e8e0..6fc5199edc 100644 --- a/keyboards/ploopyco/trackball_mini/rules.mk +++ b/keyboards/ploopyco/trackball_mini/rules.mk @@ -20,7 +20,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output POINTING_DEVICE_ENABLE = yes MOUSEKEY_ENABLE = no # Mouse keys diff --git a/keyboards/ploopyco/trackball_nano/rules.mk b/keyboards/ploopyco/trackball_nano/rules.mk index 0fe9eebd2d..a26ad93c89 100644 --- a/keyboards/ploopyco/trackball_nano/rules.mk +++ b/keyboards/ploopyco/trackball_nano/rules.mk @@ -20,7 +20,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output POINTING_DEVICE_ENABLE = yes MOUSEKEY_ENABLE = no # Mouse keys diff --git a/keyboards/preonic/rev1/rules.mk b/keyboards/preonic/rev1/rules.mk index 8f287a3a60..5cc5be7f7b 100644 --- a/keyboards/preonic/rev1/rules.mk +++ b/keyboards/preonic/rev1/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality AUDIO_ENABLE = yes # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/preonic/rev2/rules.mk b/keyboards/preonic/rev2/rules.mk index 9dc8f79b43..9d3bef39f1 100644 --- a/keyboards/preonic/rev2/rules.mk +++ b/keyboards/preonic/rev2/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality AUDIO_ENABLE = yes # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/preonic/rev3/rules.mk b/keyboards/preonic/rev3/rules.mk index ff0c57b9c7..b89945642b 100644 --- a/keyboards/preonic/rev3/rules.mk +++ b/keyboards/preonic/rev3/rules.mk @@ -17,7 +17,6 @@ COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = yes # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. WS2812_DRIVER = pwm diff --git a/keyboards/primekb/prime_l/rules.mk b/keyboards/primekb/prime_l/rules.mk index 03f76d5373..e8880f9eda 100644 --- a/keyboards/primekb/prime_l/rules.mk +++ b/keyboards/primekb/prime_l/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output DEFAULT_FOLDER = primekb/prime_l/v1 diff --git a/keyboards/primekb/prime_m/rules.mk b/keyboards/primekb/prime_m/rules.mk index 009c1918b9..630f08702f 100644 --- a/keyboards/primekb/prime_m/rules.mk +++ b/keyboards/primekb/prime_m/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = numpad_5x6 diff --git a/keyboards/primekb/prime_o/rules.mk b/keyboards/primekb/prime_o/rules.mk index e6d2bab20d..35f2448c60 100644 --- a/keyboards/primekb/prime_o/rules.mk +++ b/keyboards/primekb/prime_o/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/puck/rules.mk b/keyboards/puck/rules.mk index 2588e7b823..778604b8b5 100644 --- a/keyboards/puck/rules.mk +++ b/keyboards/puck/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/quantrik/kyuu/rules.mk b/keyboards/quantrik/kyuu/rules.mk index 86bb4c7592..077733ea87 100644 --- a/keyboards/quantrik/kyuu/rules.mk +++ b/keyboards/quantrik/kyuu/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/qwertyydox/rules.mk b/keyboards/qwertyydox/rules.mk index 4f12c6f463..dd4a6ae3ec 100644 --- a/keyboards/qwertyydox/rules.mk +++ b/keyboards/qwertyydox/rules.mk @@ -10,7 +10,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/rabbit/rabbit68/rules.mk b/keyboards/rabbit/rabbit68/rules.mk index 3f20abe434..078ff3ea65 100644 --- a/keyboards/rabbit/rabbit68/rules.mk +++ b/keyboards/rabbit/rabbit68/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/rart/rart67/rules.mk b/keyboards/rart/rart67/rules.mk index cfa8f85e4e..38eabd3670 100644 --- a/keyboards/rart/rart67/rules.mk +++ b/keyboards/rart/rart67/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/rart/rart75/rules.mk b/keyboards/rart/rart75/rules.mk index 0de51dd57e..528d54d5de 100644 --- a/keyboards/rart/rart75/rules.mk +++ b/keyboards/rart/rart75/rules.mk @@ -18,6 +18,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes diff --git a/keyboards/redox/rules.mk b/keyboards/redox/rules.mk index d87b5cf999..51668fcebf 100644 --- a/keyboards/redox/rules.mk +++ b/keyboards/redox/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. diff --git a/keyboards/redox_w/rules.mk b/keyboards/redox_w/rules.mk index 441d0d09ca..84dff9db7d 100644 --- a/keyboards/redox_w/rules.mk +++ b/keyboards/redox_w/rules.mk @@ -18,7 +18,6 @@ CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA # BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI support -UNICODE_ENABLE = YES # Unicode # # project specific files SRC += matrix.c serial_uart.c diff --git a/keyboards/redscarf_i/rules.mk b/keyboards/redscarf_i/rules.mk index b77d7f8ffc..98f297097b 100644 --- a/keyboards/redscarf_i/rules.mk +++ b/keyboards/redscarf_i/rules.mk @@ -17,6 +17,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode LAYOUTS = ortho_5x4 ortho_6x4 numpad_5x4 numpad_6x4 diff --git a/keyboards/redscarf_iiplus/verb/rules.mk b/keyboards/redscarf_iiplus/verb/rules.mk index 12bc921ece..b93c0914d5 100755 --- a/keyboards/redscarf_iiplus/verb/rules.mk +++ b/keyboards/redscarf_iiplus/verb/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output CUSTOM_MATRIX = yes diff --git a/keyboards/redscarf_iiplus/verc/rules.mk b/keyboards/redscarf_iiplus/verc/rules.mk index 1f8f5278cf..12301325d8 100755 --- a/keyboards/redscarf_iiplus/verc/rules.mk +++ b/keyboards/redscarf_iiplus/verc/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output CUSTOM_MATRIX = yes diff --git a/keyboards/redscarf_iiplus/verd/rules.mk b/keyboards/redscarf_iiplus/verd/rules.mk index dc3d149a38..738782c6f7 100644 --- a/keyboards/redscarf_iiplus/verd/rules.mk +++ b/keyboards/redscarf_iiplus/verd/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output CUSTOM_MATRIX = yes diff --git a/keyboards/reviung34/rules.mk b/keyboards/reviung34/rules.mk index 12ee34dbf3..fa30b973dd 100755 --- a/keyboards/reviung34/rules.mk +++ b/keyboards/reviung34/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/reviung39/rules.mk b/keyboards/reviung39/rules.mk index 12ee34dbf3..fa30b973dd 100644 --- a/keyboards/reviung39/rules.mk +++ b/keyboards/reviung39/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/reviung41/rules.mk b/keyboards/reviung41/rules.mk index 0f53969e28..b9377da068 100644 --- a/keyboards/reviung41/rules.mk +++ b/keyboards/reviung41/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/rgbkb/mun/rules.mk b/keyboards/rgbkb/mun/rules.mk index e81196f9ee..e0832b9277 100644 --- a/keyboards/rgbkb/mun/rules.mk +++ b/keyboards/rgbkb/mun/rules.mk @@ -18,7 +18,6 @@ CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode WS2812_DRIVER = pwm RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/rgbkb/sol/keymaps/default/readme.md b/keyboards/rgbkb/sol/keymaps/default/readme.md index 3f3e1afc5a..3769d0981d 100644 --- a/keyboards/rgbkb/sol/keymaps/default/readme.md +++ b/keyboards/rgbkb/sol/keymaps/default/readme.md @@ -89,7 +89,6 @@ LED_MIRRORED = yes # Mirror LEDs across halves (enable DIP 1 on slave, RGB_MATRIX_ENABLE = no # Enable per-key coordinate based RGB effects. Do not enable with RGBlight (+8500) RGB_MATRIX_KEYPRESSES = no # Enable reactive per-key effects. Can be very laggy (+1500) RGBLIGHT_FULL_POWER = no # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port -UNICODE_ENABLE = no # Unicode SWAP_HANDS_ENABLE = no # Enable one-hand typing OLED_ENABLE = no # Enable the OLED Driver (+5000) diff --git a/keyboards/rgbkb/sol/rev1/rules.mk b/keyboards/rgbkb/sol/rev1/rules.mk index 5c5850f907..5b5b518b4f 100644 --- a/keyboards/rgbkb/sol/rev1/rules.mk +++ b/keyboards/rgbkb/sol/rev1/rules.mk @@ -4,7 +4,6 @@ BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control -UNICODE_ENABLE = no # Unicode keycodes NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # Debug Options diff --git a/keyboards/rgbkb/sol/rev2/rules.mk b/keyboards/rgbkb/sol/rev2/rules.mk index e5d2a9dcc2..b81a6f2f01 100644 --- a/keyboards/rgbkb/sol/rev2/rules.mk +++ b/keyboards/rgbkb/sol/rev2/rules.mk @@ -4,7 +4,6 @@ BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control -UNICODE_ENABLE = no # Unicode keycodes NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # Debug Options diff --git a/keyboards/rgbkb/zen/rules.mk b/keyboards/rgbkb/zen/rules.mk index 99a61c0c06..9d6d2e1258 100644 --- a/keyboards/rgbkb/zen/rules.mk +++ b/keyboards/rgbkb/zen/rules.mk @@ -30,7 +30,6 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/rgbkb/zygomorph/keymaps/default/readme.md b/keyboards/rgbkb/zygomorph/keymaps/default/readme.md index 4f7b645109..6a9c874b22 100644 --- a/keyboards/rgbkb/zygomorph/keymaps/default/readme.md +++ b/keyboards/rgbkb/zygomorph/keymaps/default/readme.md @@ -95,7 +95,6 @@ RGBLIGHT_ANIMATIONS = yes # LED animations RGB_MATRIX_ENABLE = no # Enable per-key coordinate based RGB effects. Do not enable with RGBlight (+8500) RGB_MATRIX_KEYPRESSES = no # Enable reactive per-key effects. Can be very laggy (+1500) RGBLIGHT_FULL_POWER = yes # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port -UNICODE_ENABLE = no # Unicode SWAP_HANDS_ENABLE = no # Enable one-hand typing ENCODER_ENABLE = yes # Enable rotary encoder (+90) OLED_ENABLE = yes diff --git a/keyboards/rgbkb/zygomorph/keymaps/default/rules.mk b/keyboards/rgbkb/zygomorph/keymaps/default/rules.mk index ccceffe6a5..d5a1561b95 100644 --- a/keyboards/rgbkb/zygomorph/keymaps/default/rules.mk +++ b/keyboards/rgbkb/zygomorph/keymaps/default/rules.mk @@ -14,7 +14,6 @@ RGBLIGHT_SPLIT_ENABLE = no # Split RGBLight Support RGB_MATRIX_ENABLE = no # Enable per-key coordinate based RGB effects. Do not enable with RGBlight RGB_MATRIX_KEYPRESSES = no # Enable reactive per-key effects. RGBLIGHT_FULL_POWER = yes # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port -UNICODE_ENABLE = no # Unicode SWAP_HANDS_ENABLE = no # Enable one-hand typing ENCODER_ENABLE = yes # Enable rotary encoder OLED_ENABLE = no # Enable the OLED Driver diff --git a/keyboards/rgbkb/zygomorph/keymaps/default_oled/rules.mk b/keyboards/rgbkb/zygomorph/keymaps/default_oled/rules.mk index ce80fc0d5a..265958f6d1 100644 --- a/keyboards/rgbkb/zygomorph/keymaps/default_oled/rules.mk +++ b/keyboards/rgbkb/zygomorph/keymaps/default_oled/rules.mk @@ -14,7 +14,6 @@ RGBLIGHT_SPLIT_ENABLE = no # Split RGBLight Support RGB_MATRIX_ENABLE = no # Enable per-key coordinate based RGB effects. Do not enable with RGBlight RGB_MATRIX_KEYPRESSES = no # Enable reactive per-key effects. RGBLIGHT_FULL_POWER = yes # Allow maximum RGB brightness. Otherwise, limited to a safe level for a normal USB-A port -UNICODE_ENABLE = no # Unicode SWAP_HANDS_ENABLE = no # Enable one-hand typing ENCODER_ENABLE = yes # Enable rotary encoder OLED_ENABLE = yes diff --git a/keyboards/rgbkb/zygomorph/rules.mk b/keyboards/rgbkb/zygomorph/rules.mk index 06dc5ff950..3b9d69887e 100644 --- a/keyboards/rgbkb/zygomorph/rules.mk +++ b/keyboards/rgbkb/zygomorph/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output RGB_MATRIX_DRIVER = WS2812 diff --git a/keyboards/runner3680/rules.mk b/keyboards/runner3680/rules.mk index 6c22480b1d..783792f3e4 100644 --- a/keyboards/runner3680/rules.mk +++ b/keyboards/runner3680/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD = yes # Enables split keyboard support diff --git a/keyboards/scarletbandana/rules.mk b/keyboards/scarletbandana/rules.mk index 408264126e..5f084a84ab 100644 --- a/keyboards/scarletbandana/rules.mk +++ b/keyboards/scarletbandana/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = yes # Audio output RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality, also set ISSI_ENABLE below for Miera diff --git a/keyboards/sck/m0116b/rules.mk b/keyboards/sck/m0116b/rules.mk index 09baed14c5..576d4ef5f2 100644 --- a/keyboards/sck/m0116b/rules.mk +++ b/keyboards/sck/m0116b/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/sck/neiso/rules.mk b/keyboards/sck/neiso/rules.mk index b2fa9d130a..bc83db6a6c 100644 --- a/keyboards/sck/neiso/rules.mk +++ b/keyboards/sck/neiso/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/sck/osa/rules.mk b/keyboards/sck/osa/rules.mk index 2f68f82d13..3698c0ba0e 100644 --- a/keyboards/sck/osa/rules.mk +++ b/keyboards/sck/osa/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = alice alice_split_bs diff --git a/keyboards/scythe/rules.mk b/keyboards/scythe/rules.mk index bc1647a4aa..5d08e37774 100644 --- a/keyboards/scythe/rules.mk +++ b/keyboards/scythe/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD = yes # Use shared split_common diff --git a/keyboards/sentraq/number_pad/rules.mk b/keyboards/sentraq/number_pad/rules.mk index 3ecfb612e6..4fe63f4f8b 100644 --- a/keyboards/sentraq/number_pad/rules.mk +++ b/keyboards/sentraq/number_pad/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/sentraq/s60_x/default/rules.mk b/keyboards/sentraq/s60_x/default/rules.mk index 45ae2f090e..328768f9e7 100644 --- a/keyboards/sentraq/s60_x/default/rules.mk +++ b/keyboards/sentraq/s60_x/default/rules.mk @@ -13,7 +13,6 @@ EXTRAKEY_ENABLE = yes # Audio control and System control # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_iso 60_hhkb diff --git a/keyboards/sentraq/s60_x/rgb/rules.mk b/keyboards/sentraq/s60_x/rgb/rules.mk index 23259e9395..dd294d1be3 100644 --- a/keyboards/sentraq/s60_x/rgb/rules.mk +++ b/keyboards/sentraq/s60_x/rgb/rules.mk @@ -13,7 +13,6 @@ EXTRAKEY_ENABLE = yes # Audio control and System control # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration diff --git a/keyboards/sentraq/s65_plus/rules.mk b/keyboards/sentraq/s65_plus/rules.mk index 8c1227c351..2289322fa7 100644 --- a/keyboards/sentraq/s65_plus/rules.mk +++ b/keyboards/sentraq/s65_plus/rules.mk @@ -12,7 +12,6 @@ MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality diff --git a/keyboards/sentraq/s65_x/rules.mk b/keyboards/sentraq/s65_x/rules.mk index 2e5991e3e4..7212ce40d3 100644 --- a/keyboards/sentraq/s65_x/rules.mk +++ b/keyboards/sentraq/s65_x/rules.mk @@ -12,7 +12,6 @@ MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality diff --git a/keyboards/setta21/rules.mk b/keyboards/setta21/rules.mk index 9f598e457d..3cd0f2b5fe 100644 --- a/keyboards/setta21/rules.mk +++ b/keyboards/setta21/rules.mk @@ -15,7 +15,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. OLED_ENABLE = no USE_I2C = no diff --git a/keyboards/shiro/rules.mk b/keyboards/shiro/rules.mk index 8fde4f64f1..0099557cbe 100644 --- a/keyboards/shiro/rules.mk +++ b/keyboards/shiro/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/silverbullet44/rules.mk b/keyboards/silverbullet44/rules.mk index 639bead24f..14f8ec679f 100644 --- a/keyboards/silverbullet44/rules.mk +++ b/keyboards/silverbullet44/rules.mk @@ -20,7 +20,6 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow RGB_MATRIX_ENABLE = no RGB_MATRIX_DRIVER = WS2812 -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = yes # Audio output SPLIT_KEYBOARD = yes LTO_ENABLE = yes diff --git a/keyboards/sixkeyboard/rules.mk b/keyboards/sixkeyboard/rules.mk index 0bc7d6f25b..1ce62d90d0 100644 --- a/keyboards/sixkeyboard/rules.mk +++ b/keyboards/sixkeyboard/rules.mk @@ -16,7 +16,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no -UNICODE_ENABLE = no # Unicode CUSTOM_MATRIX = yes SRC += matrix.c diff --git a/keyboards/smk60/rules.mk b/keyboards/smk60/rules.mk index 79c314dea6..30872a3c27 100644 --- a/keyboards/smk60/rules.mk +++ b/keyboards/smk60/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes # Use RGB bottom light LAYOUTS = 60_ansi 60_hhkb 60_iso diff --git a/keyboards/snampad/rules.mk b/keyboards/snampad/rules.mk index f245598547..f6f0c8516b 100644 --- a/keyboards/snampad/rules.mk +++ b/keyboards/snampad/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = numpad_6x4 diff --git a/keyboards/spacetime/rules.mk b/keyboards/spacetime/rules.mk index e680660e55..05efe18d29 100644 --- a/keyboards/spacetime/rules.mk +++ b/keyboards/spacetime/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output OLED_ENABLE = no diff --git a/keyboards/splitkb/kyria/rules.mk b/keyboards/splitkb/kyria/rules.mk index 3ac6b3822b..f0e5cfc3d5 100644 --- a/keyboards/splitkb/kyria/rules.mk +++ b/keyboards/splitkb/kyria/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD = yes # Split common LTO_ENABLE = yes diff --git a/keyboards/splitreus62/rules.mk b/keyboards/splitreus62/rules.mk index a94c727fe8..b5f2571dc7 100644 --- a/keyboards/splitreus62/rules.mk +++ b/keyboards/splitreus62/rules.mk @@ -19,6 +19,5 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode SPLIT_KEYBOARD = yes diff --git a/keyboards/standaside/rules.mk b/keyboards/standaside/rules.mk index 60da7f9e4a..47037373f4 100644 --- a/keyboards/standaside/rules.mk +++ b/keyboards/standaside/rules.mk @@ -17,6 +17,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes # Enable RGB underlighting support diff --git a/keyboards/subatomic/rules.mk b/keyboards/subatomic/rules.mk index fe60b04436..f024da0b20 100644 --- a/keyboards/subatomic/rules.mk +++ b/keyboards/subatomic/rules.mk @@ -17,7 +17,6 @@ NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: ht BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality MIDI_ENABLE = yes # MIDI support AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/suihankey/rules.mk b/keyboards/suihankey/rules.mk index 5feea22102..2a0566f944 100644 --- a/keyboards/suihankey/rules.mk +++ b/keyboards/suihankey/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output OLED_ENABLE = yes OLED_DRIVER = SSD1306 diff --git a/keyboards/switchplate/southpaw_65/rules.mk b/keyboards/switchplate/southpaw_65/rules.mk index c10c24612a..baade350b0 100644 --- a/keyboards/switchplate/southpaw_65/rules.mk +++ b/keyboards/switchplate/southpaw_65/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LTO_ENABLE = yes diff --git a/keyboards/tada68/rules.mk b/keyboards/tada68/rules.mk index d5d5ce6ce7..e639cb4961 100755 --- a/keyboards/tada68/rules.mk +++ b/keyboards/tada68/rules.mk @@ -22,6 +22,5 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode LAYOUTS = 65_ansi 65_iso diff --git a/keyboards/tanuki/rules.mk b/keyboards/tanuki/rules.mk index 92e3a57c82..7b17aed247 100644 --- a/keyboards/tanuki/rules.mk +++ b/keyboards/tanuki/rules.mk @@ -16,4 +16,3 @@ NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https:/ RGBLIGHT_ENABLE =yes # Enable keyboard underlight functionality BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no -UNICODE_ENABLE = no # Unicode diff --git a/keyboards/tender/macrowo_pad/rules.mk b/keyboards/tender/macrowo_pad/rules.mk index 99eea9632e..b4046de018 100644 --- a/keyboards/tender/macrowo_pad/rules.mk +++ b/keyboards/tender/macrowo_pad/rules.mk @@ -16,6 +16,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = no # Enable support for EC11 Rotary Encoder diff --git a/keyboards/the_royal/schwann/rules.mk b/keyboards/the_royal/schwann/rules.mk index 815a5c9183..06faa7f457 100644 --- a/keyboards/the_royal/schwann/rules.mk +++ b/keyboards/the_royal/schwann/rules.mk @@ -17,6 +17,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output - diff --git a/keyboards/the_ruler/rules.mk b/keyboards/the_ruler/rules.mk index fa60d0f3ae..dc86223dd9 100644 --- a/keyboards/the_ruler/rules.mk +++ b/keyboards/the_ruler/rules.mk @@ -17,6 +17,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. diff --git a/keyboards/thevankeyboards/caravan/rules.mk b/keyboards/thevankeyboards/caravan/rules.mk index b40cdfd96e..66cda91707 100644 --- a/keyboards/thevankeyboards/caravan/rules.mk +++ b/keyboards/thevankeyboards/caravan/rules.mk @@ -14,5 +14,4 @@ CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/thevankeyboards/minivan/rules.mk b/keyboards/thevankeyboards/minivan/rules.mk index 075a44f58d..b3af99d92b 100644 --- a/keyboards/thevankeyboards/minivan/rules.mk +++ b/keyboards/thevankeyboards/minivan/rules.mk @@ -17,6 +17,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes # Enable support for RGB LEDs diff --git a/keyboards/thevankeyboards/roadkit/rules.mk b/keyboards/thevankeyboards/roadkit/rules.mk index 51a84eeb95..4de3295a9d 100644 --- a/keyboards/thevankeyboards/roadkit/rules.mk +++ b/keyboards/thevankeyboards/roadkit/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LAYOUTS = numpad_4x4 ortho_4x4 diff --git a/keyboards/tkc/osav2/rules.mk b/keyboards/tkc/osav2/rules.mk index ccc6702bc9..6a44150852 100644 --- a/keyboards/tkc/osav2/rules.mk +++ b/keyboards/tkc/osav2/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LTO_ENABLE = yes # Reduces compile size diff --git a/keyboards/tkc/tkc1800/rules.mk b/keyboards/tkc/tkc1800/rules.mk index 3e055a8aee..d97c861178 100644 --- a/keyboards/tkc/tkc1800/rules.mk +++ b/keyboards/tkc/tkc1800/rules.mk @@ -19,7 +19,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output OLED_ENABLE = yes OLED_DRIVER = SSD1306 diff --git a/keyboards/tmo50/rules.mk b/keyboards/tmo50/rules.mk index a881bae71b..c1677dcd9e 100644 --- a/keyboards/tmo50/rules.mk +++ b/keyboards/tmo50/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/tokyokeyboard/tokyo60/rules.mk b/keyboards/tokyokeyboard/tokyo60/rules.mk index 2be3157442..2703c4269f 100644 --- a/keyboards/tokyokeyboard/tokyo60/rules.mk +++ b/keyboards/tokyokeyboard/tokyo60/rules.mk @@ -13,7 +13,6 @@ EXTRAKEY_ENABLE = yes # Audio control and System control # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration diff --git a/keyboards/touchpad/rules.mk b/keyboards/touchpad/rules.mk index ee0e428c2b..f1febba12f 100644 --- a/keyboards/touchpad/rules.mk +++ b/keyboards/touchpad/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. CUSTOM_MATRIX = yes diff --git a/keyboards/treadstone32/rules.mk b/keyboards/treadstone32/rules.mk index 450541136e..11c1d342f2 100644 --- a/keyboards/treadstone32/rules.mk +++ b/keyboards/treadstone32/rules.mk @@ -12,7 +12,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. LEADER_ENABLE = no diff --git a/keyboards/treasure/type9/rules.mk b/keyboards/treasure/type9/rules.mk index f61fb39a1c..f752158eec 100644 --- a/keyboards/treasure/type9/rules.mk +++ b/keyboards/treasure/type9/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/uranuma/rules.mk b/keyboards/uranuma/rules.mk index 28aa4c81de..0b804e053c 100644 --- a/keyboards/uranuma/rules.mk +++ b/keyboards/uranuma/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output #SRC += .nicola.c \ diff --git a/keyboards/ut472/rules.mk b/keyboards/ut472/rules.mk index 48b730df25..23a0730052 100644 --- a/keyboards/ut472/rules.mk +++ b/keyboards/ut472/rules.mk @@ -17,6 +17,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes diff --git a/keyboards/uzu42/rules.mk b/keyboards/uzu42/rules.mk index ac742c8c02..d33fedf728 100644 --- a/keyboards/uzu42/rules.mk +++ b/keyboards/uzu42/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/v60_type_r/rules.mk b/keyboards/v60_type_r/rules.mk index 57c21f367d..0f1ac6a576 100644 --- a/keyboards/v60_type_r/rules.mk +++ b/keyboards/v60_type_r/rules.mk @@ -19,7 +19,6 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable the RGB Underglow RGBLIGHT_CUSTOM_DRIVER = yes -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LTO_ENABLE = yes diff --git a/keyboards/vitamins_included/rules.mk b/keyboards/vitamins_included/rules.mk index 7861da178f..3fac08dabe 100644 --- a/keyboards/vitamins_included/rules.mk +++ b/keyboards/vitamins_included/rules.mk @@ -15,7 +15,6 @@ EXTRAKEY_ENABLE = yes # Audio control and System control MOUSEKEY_ENABLE = no # Mouse keys NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. -UNICODE_ENABLE = no # Unicode # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/waldo/rules.mk b/keyboards/waldo/rules.mk index e1a743e0e7..2a1bb2cab7 100644 --- a/keyboards/waldo/rules.mk +++ b/keyboards/waldo/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/westfoxtrot/aanzee/rules.mk b/keyboards/westfoxtrot/aanzee/rules.mk index 9f15504941..8107a9534d 100644 --- a/keyboards/westfoxtrot/aanzee/rules.mk +++ b/keyboards/westfoxtrot/aanzee/rules.mk @@ -16,5 +16,4 @@ NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https:/ RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality AUDIO_ENABLE = no -UNICODE_ENABLE = no # Unicode diff --git a/keyboards/westfoxtrot/cyclops/rules.mk b/keyboards/westfoxtrot/cyclops/rules.mk index a4fe123651..1a11791486 100644 --- a/keyboards/westfoxtrot/cyclops/rules.mk +++ b/keyboards/westfoxtrot/cyclops/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/westfoxtrot/cypher/rev1/rules.mk b/keyboards/westfoxtrot/cypher/rev1/rules.mk index 25e7b4b658..7829857270 100644 --- a/keyboards/westfoxtrot/cypher/rev1/rules.mk +++ b/keyboards/westfoxtrot/cypher/rev1/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/westfoxtrot/cypher/rev5/rules.mk b/keyboards/westfoxtrot/cypher/rev5/rules.mk index 5c4ab230c2..c8d113f48c 100644 --- a/keyboards/westfoxtrot/cypher/rev5/rules.mk +++ b/keyboards/westfoxtrot/cypher/rev5/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/wheatfield/blocked65/rules.mk b/keyboards/wheatfield/blocked65/rules.mk index f8ade5009b..f0b84d209f 100644 --- a/keyboards/wheatfield/blocked65/rules.mk +++ b/keyboards/wheatfield/blocked65/rules.mk @@ -19,6 +19,5 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode LAYOUTS = 65_ansi_blocker diff --git a/keyboards/wilba_tech/rama_works_koyu/rules.mk b/keyboards/wilba_tech/rama_works_koyu/rules.mk index c73652815b..803847b53c 100644 --- a/keyboards/wilba_tech/rama_works_koyu/rules.mk +++ b/keyboards/wilba_tech/rama_works_koyu/rules.mk @@ -21,7 +21,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/wilba_tech/rama_works_m10_b/rules.mk b/keyboards/wilba_tech/rama_works_m10_b/rules.mk index df4c1b12c1..0bedbef453 100644 --- a/keyboards/wilba_tech/rama_works_m10_b/rules.mk +++ b/keyboards/wilba_tech/rama_works_m10_b/rules.mk @@ -17,5 +17,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/wilba_tech/rama_works_m60_a/rules.mk b/keyboards/wilba_tech/rama_works_m60_a/rules.mk index 5bcc1b9b79..c75ab4e04f 100644 --- a/keyboards/wilba_tech/rama_works_m60_a/rules.mk +++ b/keyboards/wilba_tech/rama_works_m60_a/rules.mk @@ -21,7 +21,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/wilba_tech/rama_works_m6_a/rules.mk b/keyboards/wilba_tech/rama_works_m6_a/rules.mk index fb3f1ea560..446bf71d47 100644 --- a/keyboards/wilba_tech/rama_works_m6_a/rules.mk +++ b/keyboards/wilba_tech/rama_works_m6_a/rules.mk @@ -20,7 +20,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/wilba_tech/rama_works_m6_b/rules.mk b/keyboards/wilba_tech/rama_works_m6_b/rules.mk index e12acee899..d0d63b3dfc 100644 --- a/keyboards/wilba_tech/rama_works_m6_b/rules.mk +++ b/keyboards/wilba_tech/rama_works_m6_b/rules.mk @@ -20,7 +20,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/wilba_tech/rama_works_u80_a/rules.mk b/keyboards/wilba_tech/rama_works_u80_a/rules.mk index 52b6125a4e..ceedde0d4e 100644 --- a/keyboards/wilba_tech/rama_works_u80_a/rules.mk +++ b/keyboards/wilba_tech/rama_works_u80_a/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output CIE1931_CURVE = yes diff --git a/keyboards/wilba_tech/wt60_a/rules.mk b/keyboards/wilba_tech/wt60_a/rules.mk index 879d6de4c9..2c07cd045d 100644 --- a/keyboards/wilba_tech/wt60_a/rules.mk +++ b/keyboards/wilba_tech/wt60_a/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output # project specific files diff --git a/keyboards/wilba_tech/wt60_b/rules.mk b/keyboards/wilba_tech/wt60_b/rules.mk index 575120b390..252739a1a4 100644 --- a/keyboards/wilba_tech/wt60_b/rules.mk +++ b/keyboards/wilba_tech/wt60_b/rules.mk @@ -21,7 +21,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/wilba_tech/wt60_bx/rules.mk b/keyboards/wilba_tech/wt60_bx/rules.mk index 575120b390..252739a1a4 100644 --- a/keyboards/wilba_tech/wt60_bx/rules.mk +++ b/keyboards/wilba_tech/wt60_bx/rules.mk @@ -21,7 +21,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/wilba_tech/wt60_c/rules.mk b/keyboards/wilba_tech/wt60_c/rules.mk index 575120b390..252739a1a4 100644 --- a/keyboards/wilba_tech/wt60_c/rules.mk +++ b/keyboards/wilba_tech/wt60_c/rules.mk @@ -21,7 +21,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/wilba_tech/wt60_d/rules.mk b/keyboards/wilba_tech/wt60_d/rules.mk index df4c1b12c1..0bedbef453 100644 --- a/keyboards/wilba_tech/wt60_d/rules.mk +++ b/keyboards/wilba_tech/wt60_d/rules.mk @@ -17,5 +17,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/wilba_tech/wt60_xt/rules.mk b/keyboards/wilba_tech/wt60_xt/rules.mk index a910daef21..dde7c27f42 100644 --- a/keyboards/wilba_tech/wt60_xt/rules.mk +++ b/keyboards/wilba_tech/wt60_xt/rules.mk @@ -17,5 +17,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = yes # Audio output diff --git a/keyboards/wilba_tech/wt65_a/rules.mk b/keyboards/wilba_tech/wt65_a/rules.mk index 879d6de4c9..2c07cd045d 100644 --- a/keyboards/wilba_tech/wt65_a/rules.mk +++ b/keyboards/wilba_tech/wt65_a/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output # project specific files diff --git a/keyboards/wilba_tech/wt65_b/rules.mk b/keyboards/wilba_tech/wt65_b/rules.mk index 879d6de4c9..2c07cd045d 100644 --- a/keyboards/wilba_tech/wt65_b/rules.mk +++ b/keyboards/wilba_tech/wt65_b/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output # project specific files diff --git a/keyboards/wilba_tech/wt69_a/rules.mk b/keyboards/wilba_tech/wt69_a/rules.mk index 034fc8b2f1..c70f8cced6 100644 --- a/keyboards/wilba_tech/wt69_a/rules.mk +++ b/keyboards/wilba_tech/wt69_a/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output # project specific files diff --git a/keyboards/wilba_tech/wt75_a/rules.mk b/keyboards/wilba_tech/wt75_a/rules.mk index 879d6de4c9..2c07cd045d 100644 --- a/keyboards/wilba_tech/wt75_a/rules.mk +++ b/keyboards/wilba_tech/wt75_a/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output # project specific files diff --git a/keyboards/wilba_tech/wt75_b/rules.mk b/keyboards/wilba_tech/wt75_b/rules.mk index 879d6de4c9..2c07cd045d 100644 --- a/keyboards/wilba_tech/wt75_b/rules.mk +++ b/keyboards/wilba_tech/wt75_b/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output # project specific files diff --git a/keyboards/wilba_tech/wt75_c/rules.mk b/keyboards/wilba_tech/wt75_c/rules.mk index 879d6de4c9..2c07cd045d 100644 --- a/keyboards/wilba_tech/wt75_c/rules.mk +++ b/keyboards/wilba_tech/wt75_c/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output # project specific files diff --git a/keyboards/wilba_tech/wt80_a/rules.mk b/keyboards/wilba_tech/wt80_a/rules.mk index 879d6de4c9..2c07cd045d 100644 --- a/keyboards/wilba_tech/wt80_a/rules.mk +++ b/keyboards/wilba_tech/wt80_a/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output # project specific files diff --git a/keyboards/wilba_tech/wt80_bc/rules.mk b/keyboards/wilba_tech/wt80_bc/rules.mk index c38e84e039..da542bd80d 100644 --- a/keyboards/wilba_tech/wt80_bc/rules.mk +++ b/keyboards/wilba_tech/wt80_bc/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output # project specific files diff --git a/keyboards/wilba_tech/wt8_a/rules.mk b/keyboards/wilba_tech/wt8_a/rules.mk index 034fc8b2f1..c70f8cced6 100644 --- a/keyboards/wilba_tech/wt8_a/rules.mk +++ b/keyboards/wilba_tech/wt8_a/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output # project specific files diff --git a/keyboards/wilba_tech/zeal60/rules.mk b/keyboards/wilba_tech/zeal60/rules.mk index 832077492d..1c385162e5 100644 --- a/keyboards/wilba_tech/zeal60/rules.mk +++ b/keyboards/wilba_tech/zeal60/rules.mk @@ -21,7 +21,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/wilba_tech/zeal65/rules.mk b/keyboards/wilba_tech/zeal65/rules.mk index aa84617cb6..846c2d131e 100644 --- a/keyboards/wilba_tech/zeal65/rules.mk +++ b/keyboards/wilba_tech/zeal65/rules.mk @@ -21,7 +21,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/wolfmarkclub/wm1/rules.mk b/keyboards/wolfmarkclub/wm1/rules.mk index 50f792715d..18c26c3abc 100644 --- a/keyboards/wolfmarkclub/wm1/rules.mk +++ b/keyboards/wolfmarkclub/wm1/rules.mk @@ -21,7 +21,6 @@ SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LTO_ENABLE = yes diff --git a/keyboards/wsk/gothic50/rules.mk b/keyboards/wsk/gothic50/rules.mk index 898966317b..1e54e6c405 100644 --- a/keyboards/wsk/gothic50/rules.mk +++ b/keyboards/wsk/gothic50/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/wsk/gothic70/rules.mk b/keyboards/wsk/gothic70/rules.mk index 898966317b..1e54e6c405 100644 --- a/keyboards/wsk/gothic70/rules.mk +++ b/keyboards/wsk/gothic70/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/xelus/dawn60/rev1/rules.mk b/keyboards/xelus/dawn60/rev1/rules.mk index 59c338461b..f82a270f44 100644 --- a/keyboards/xelus/dawn60/rev1/rules.mk +++ b/keyboards/xelus/dawn60/rev1/rules.mk @@ -22,7 +22,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. - We have custom RGB underglow diff --git a/keyboards/xelus/dawn60/rev1_qmk/rules.mk b/keyboards/xelus/dawn60/rev1_qmk/rules.mk index ae963e6e07..bfaea5f495 100644 --- a/keyboards/xelus/dawn60/rev1_qmk/rules.mk +++ b/keyboards/xelus/dawn60/rev1_qmk/rules.mk @@ -22,7 +22,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. - We have custom RGB underglow diff --git a/keyboards/xelus/pachi/rgb/rules.mk b/keyboards/xelus/pachi/rgb/rules.mk index 79d44bf90e..05eac7e959 100644 --- a/keyboards/xelus/pachi/rgb/rules.mk +++ b/keyboards/xelus/pachi/rgb/rules.mk @@ -17,7 +17,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches diff --git a/keyboards/xelus/snap96/rules.mk b/keyboards/xelus/snap96/rules.mk index fdedbf0c50..83626597d5 100644 --- a/keyboards/xelus/snap96/rules.mk +++ b/keyboards/xelus/snap96/rules.mk @@ -17,6 +17,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. - We have custom RGB underglow diff --git a/keyboards/xiudi/xd002/rules.mk b/keyboards/xiudi/xd002/rules.mk index cb95d7992e..f6294c209f 100644 --- a/keyboards/xiudi/xd002/rules.mk +++ b/keyboards/xiudi/xd002/rules.mk @@ -20,7 +20,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output # Save as much space as we can... diff --git a/keyboards/xiudi/xd004/v1/rules.mk b/keyboards/xiudi/xd004/v1/rules.mk index 41eae5bb17..cc04c57324 100644 --- a/keyboards/xiudi/xd004/v1/rules.mk +++ b/keyboards/xiudi/xd004/v1/rules.mk @@ -13,7 +13,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SPACE_CADET_ENABLE = no diff --git a/keyboards/xiudi/xd60/rev2/rules.mk b/keyboards/xiudi/xd60/rev2/rules.mk index 1e7721da3a..c825de8dbe 100644 --- a/keyboards/xiudi/xd60/rev2/rules.mk +++ b/keyboards/xiudi/xd60/rev2/rules.mk @@ -13,7 +13,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/xiudi/xd60/rev3/rules.mk b/keyboards/xiudi/xd60/rev3/rules.mk index 1e7721da3a..c825de8dbe 100644 --- a/keyboards/xiudi/xd60/rev3/rules.mk +++ b/keyboards/xiudi/xd60/rev3/rules.mk @@ -13,7 +13,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/xiudi/xd68/rules.mk b/keyboards/xiudi/xd68/rules.mk index ccff681631..4310c11206 100644 --- a/keyboards/xiudi/xd68/rules.mk +++ b/keyboards/xiudi/xd68/rules.mk @@ -19,6 +19,5 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode LAYOUTS = 65_ansi 65_ansi_split_bs 65_iso diff --git a/keyboards/xiudi/xd84/rules.mk b/keyboards/xiudi/xd84/rules.mk index c467036991..54809bc998 100644 --- a/keyboards/xiudi/xd84/rules.mk +++ b/keyboards/xiudi/xd84/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LTO_ENABLE = yes diff --git a/keyboards/xiudi/xd87/rules.mk b/keyboards/xiudi/xd87/rules.mk index 0bde383ae6..5fb8c67600 100644 --- a/keyboards/xiudi/xd87/rules.mk +++ b/keyboards/xiudi/xd87/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output # Supported layouts diff --git a/keyboards/xiudi/xd96/rules.mk b/keyboards/xiudi/xd96/rules.mk index c10c24612a..baade350b0 100644 --- a/keyboards/xiudi/xd96/rules.mk +++ b/keyboards/xiudi/xd96/rules.mk @@ -18,7 +18,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output LTO_ENABLE = yes diff --git a/keyboards/xw60/rules.mk b/keyboards/xw60/rules.mk index 81288f05ca..5921be64c3 100644 --- a/keyboards/xw60/rules.mk +++ b/keyboards/xw60/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. HAPTIC_ENABLE += SOLENOID # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/yd68/rules.mk b/keyboards/yd68/rules.mk index 05f4a7157a..b43693882f 100644 --- a/keyboards/yd68/rules.mk +++ b/keyboards/yd68/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/yeehaw/rules.mk b/keyboards/yeehaw/rules.mk index ae2fa58f48..34c4387797 100644 --- a/keyboards/yeehaw/rules.mk +++ b/keyboards/yeehaw/rules.mk @@ -16,5 +16,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -UNICODE_ENABLE = no # Unicode ENCODER_ENABLE = yes diff --git a/keyboards/yncognito/batpad/rules.mk b/keyboards/yncognito/batpad/rules.mk index 58fa541ec6..ab2800ba34 100644 --- a/keyboards/yncognito/batpad/rules.mk +++ b/keyboards/yncognito/batpad/rules.mk @@ -19,5 +19,4 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGB_MATRIX_ENABLE = yes RGB_MATRIX_DRIVER = WS2812 -UNICODE_ENABLE = no # Unicode AUDIO_ENABLE = no # Audio output diff --git a/keyboards/yosino58/rules.mk b/keyboards/yosino58/rules.mk index 97b37ba1d3..8ba43d1db0 100644 --- a/keyboards/yosino58/rules.mk +++ b/keyboards/yosino58/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SUBPROJECT_rev1 = no USE_I2C = yes diff --git a/keyboards/zinc/keymaps/default/rules.mk b/keyboards/zinc/keymaps/default/rules.mk index 5cdd1c81aa..83e1fed1eb 100644 --- a/keyboards/zinc/keymaps/default/rules.mk +++ b/keyboards/zinc/keymaps/default/rules.mk @@ -11,7 +11,6 @@ NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: ht BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. SWAP_HANDS_ENABLE = no # Enable one-hand typing LTO_ENABLE = no # if firmware size over limit, try this option diff --git a/keyboards/zinc/rules.mk b/keyboards/zinc/rules.mk index 2a42dddcd7..4edbdd9e32 100644 --- a/keyboards/zinc/rules.mk +++ b/keyboards/zinc/rules.mk @@ -16,7 +16,6 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output -UNICODE_ENABLE = no # Unicode RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend RGB_MATRIX_ENABLE = no From a8e13f041e55fe46d7168eecf1c9862f22ef5f3e Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Thu, 30 Sep 2021 08:20:46 +0000 Subject: [PATCH 165/595] Mechlovin Hex4B: extend layout support (#14651) * use XXX for KC_NO in hex4b.h * add matrix diagram to hex4b.h * rename LAYOUT to LAYOUT_all * remove reference to KBFirmware JSON Parser * info.json: add line breaks between rows * rename LAYOUT_all to LAYOUT_split_bs - LAYOUT alias for backward compatibility - LAYOUT_all alias to signify support for every matrix position * add LAYOUT_2u_bs * add LAYOUT_tsangan_split_bs * add LAYOUT_tsangan_2u_bs * info.json: remove meta key --- keyboards/mechlovin/hex4b/hex4b.h | 84 +++++- keyboards/mechlovin/hex4b/info.json | 281 +++++++++++++++++- .../mechlovin/hex4b/keymaps/default/keymap.c | 2 +- .../mechlovin/hex4b/keymaps/via/keymap.c | 8 +- 4 files changed, 359 insertions(+), 16 deletions(-) diff --git a/keyboards/mechlovin/hex4b/hex4b.h b/keyboards/mechlovin/hex4b/hex4b.h index efee2ec7ee..17e2da910f 100644 --- a/keyboards/mechlovin/hex4b/hex4b.h +++ b/keyboards/mechlovin/hex4b/hex4b.h @@ -18,7 +18,28 @@ #include "quantum.h" -#define LAYOUT( \ +#define XXX KC_NO + +/* + * ┌───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┐ + * │00 │ │01 │02 │03 │04 │ │06 │07 │08 │09 │ │0A │0B │0C │0D │ │0E │ + * ├───┼─┴─┬─┴─┬─┴─┬─┴─┬─┴─┼───┼───┼───┼───┼─┴─┬─┴─┬─┴─┬─┴─┬─┴─┼───┤ ┌───────┐ + * │10 │11 │12 │13 │14 │15 │16 │17 │18 │19 │1A │1B │1C │1D │3C │1E │ │1D │ 2u Backspace + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┤ └───────┘ + * │20 │21 │22 │23 │24 │25 │26 │27 │28 │29 │2A │2B │2C │2D │2E │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤ + * │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3A │3B │3D │3E │ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤ + * │40 │42 │43 │44 │45 │46 │47 │48 │49 │4A │4B │4C │4D │4E │ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───────┼───┤ + * │50 │51 │52 │56 │5A │5B │ │5C │5D │5E │ + * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘ + * ┌─────┬───┬─────┬───────────────────────────┬─────┐ + * │50 │51 │52 │56 │5B │ Tsangan + * └─────┴───┴─────┴───────────────────────────┴─────┘ + */ + +#define LAYOUT_split_bs( \ K00, K01, K02, K03, K04, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K3C, K1E, \ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, \ @@ -26,13 +47,58 @@ K40, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E, \ K50, K51, K52, K56, K5A, K5B, K5C, K5D, K5E \ ) { \ - { K00, K01, K02, K03, K04, KC_NO, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ - { K40, KC_NO, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E }, \ - { K50, K51, K52, KC_NO, KC_NO, KC_NO, K56, KC_NO, KC_NO, KC_NO, K5A, K5B, K5C, K5D, K5E }, \ + { K00, K01, K02, K03, K04, XXX, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, XXX, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E }, \ + { K50, K51, K52, XXX, XXX, XXX, K56, XXX, XXX, XXX, K5A, K5B, K5C, K5D, K5E }, \ +} + +#define LAYOUT_2u_bs( \ + K00, K01, K02, K03, K04, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3E, \ + K40, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E, \ + K50, K51, K52, K56, K5A, K5B, K5C, K5D, K5E \ +) { \ + { K00, K01, K02, K03, K04, XXX, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, K3D, K3E }, \ + { K40, XXX, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E }, \ + { K50, K51, K52, XXX, XXX, XXX, K56, XXX, XXX, XXX, K5A, K5B, K5C, K5D, K5E }, \ +} + +#define LAYOUT_tsangan_split_bs( \ + K00, K01, K02, K03, K04, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K3C, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3E, \ + K40, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E, \ + K50, K51, K52, K56, K5B, K5C, K5D, K5E \ +) { \ + { K00, K01, K02, K03, K04, XXX, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, XXX, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E }, \ + { K50, K51, K52, XXX, XXX, XXX, K56, XXX, XXX, XXX, XXX, K5B, K5C, K5D, K5E }, \ } -// generated by KBFirmware JSON to QMK Parser -// https://noroadsleft.github.io/kbf_qmk_converter/ \ No newline at end of file +#define LAYOUT_tsangan_2u_bs( \ + K00, K01, K02, K03, K04, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3E, \ + K40, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E, \ + K50, K51, K52, K56, K5B, K5C, K5D, K5E \ +) { \ + { K00, K01, K02, K03, K04, XXX, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, K3D, K3E }, \ + { K40, XXX, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E }, \ + { K50, K51, K52, XXX, XXX, XXX, K56, XXX, XXX, XXX, XXX, K5B, K5C, K5D, K5E }, \ +} diff --git a/keyboards/mechlovin/hex4b/info.json b/keyboards/mechlovin/hex4b/info.json index 2a1e02d6a6..686d79cc0e 100644 --- a/keyboards/mechlovin/hex4b/info.json +++ b/keyboards/mechlovin/hex4b/info.json @@ -2,8 +2,12 @@ "keyboard_name": "Hex4B", "url": "", "maintainer": "Hex-Keyboard&Mechlovin", + "layout_aliases": { + "LAYOUT": "LAYOUT_split_bs", + "LAYOUT_all": "LAYOUT_split_bs" + }, "layouts": { - "LAYOUT": { + "LAYOUT_split_bs": { "layout": [ {"label":"K00 (B0,B6)", "x":0, "y":0}, {"label":"K01 (B0,B7)", "x":1.5, "y":0}, @@ -19,6 +23,7 @@ {"label":"K0C (B0,D2)", "x":12.5, "y":0}, {"label":"K0D (B0,D3)", "x":13.5, "y":0}, {"label":"K0E (B0,D4)", "x":15, "y":0}, + {"label":"K10 (B1,B6)", "x":0, "y":1}, {"label":"K11 (B1,B7)", "x":1, "y":1}, {"label":"K12 (B1,C0)", "x":2, "y":1}, @@ -35,6 +40,7 @@ {"label":"K1D (B1,D3)", "x":13, "y":1}, {"label":"K3C (B3,D2)", "x":14, "y":1}, {"label":"K1E (B1,D4)", "x":15, "y":1}, + {"label":"K20 (B2,B6)", "x":0, "y":2, "w":1.5}, {"label":"K21 (B2,B7)", "x":1.5, "y":2}, {"label":"K22 (B2,C0)", "x":2.5, "y":2}, @@ -50,6 +56,7 @@ {"label":"K2C (B2,D2)", "x":12.5, "y":2}, {"label":"K2D (B2,D3)", "x":13.5, "y":2, "w":1.5}, {"label":"K2E (B2,D4)", "x":15, "y":2}, + {"label":"K30 (B3,B6)", "x":0, "y":3, "w":1.75}, {"label":"K31 (B3,B7)", "x":1.75, "y":3}, {"label":"K32 (B3,C0)", "x":2.75, "y":3}, @@ -64,6 +71,7 @@ {"label":"K3B (B3,D1)", "x":11.75, "y":3}, {"label":"K3D (B3,D3)", "x":12.75, "y":3, "w":2.25}, {"label":"K3E (B3,D4)", "x":15, "y":3}, + {"label":"K40 (B4,B6)", "x":0, "y":4, "w":2.25}, {"label":"K42 (B4,C0)", "x":2.25, "y":4}, {"label":"K43 (B4,C1)", "x":3.25, "y":4}, @@ -78,6 +86,7 @@ {"label":"K4C (B4,D2)", "x":12.25, "y":4, "w":1.75}, {"label":"K4D (B4,D3)", "x":14, "y":4}, {"label":"K4E (B4,D4)", "x":15, "y":4}, + {"label":"K50 (B5,B6)", "x":0, "y":5, "w":1.25}, {"label":"K51 (B5,B7)", "x":1.25, "y":5, "w":1.25}, {"label":"K52 (B5,C0)", "x":2.5, "y":5, "w":1.25}, @@ -88,7 +97,275 @@ {"label":"K5D (B5,D3)", "x":14, "y":5}, {"label":"K5E (B5,D4)", "x":15, "y":5} ] + }, + "LAYOUT_2u_bs": { + "layout": [ + {"label":"K00 (B0,B6)", "x":0, "y":0}, + {"label":"K01 (B0,B7)", "x":1.5, "y":0}, + {"label":"K02 (B0,C0)", "x":2.5, "y":0}, + {"label":"K03 (B0,C1)", "x":3.5, "y":0}, + {"label":"K04 (B0,C2)", "x":4.5, "y":0}, + {"label":"K06 (B0,C4)", "x":6, "y":0}, + {"label":"K07 (B0,C5)", "x":7, "y":0}, + {"label":"K08 (B0,C6)", "x":8, "y":0}, + {"label":"K09 (B0,C7)", "x":9, "y":0}, + {"label":"K0A (B0,D0)", "x":10.5, "y":0}, + {"label":"K0B (B0,D1)", "x":11.5, "y":0}, + {"label":"K0C (B0,D2)", "x":12.5, "y":0}, + {"label":"K0D (B0,D3)", "x":13.5, "y":0}, + {"label":"K0E (B0,D4)", "x":15, "y":0}, + + {"label":"K10 (B1,B6)", "x":0, "y":1}, + {"label":"K11 (B1,B7)", "x":1, "y":1}, + {"label":"K12 (B1,C0)", "x":2, "y":1}, + {"label":"K13 (B1,C1)", "x":3, "y":1}, + {"label":"K14 (B1,C2)", "x":4, "y":1}, + {"label":"K15 (B1,C3)", "x":5, "y":1}, + {"label":"K16 (B1,C4)", "x":6, "y":1}, + {"label":"K17 (B1,C5)", "x":7, "y":1}, + {"label":"K18 (B1,C6)", "x":8, "y":1}, + {"label":"K19 (B1,C7)", "x":9, "y":1}, + {"label":"K1A (B1,D0)", "x":10, "y":1}, + {"label":"K1B (B1,D1)", "x":11, "y":1}, + {"label":"K1C (B1,D2)", "x":12, "y":1}, + {"label":"K1D (B1,D3)", "x":13, "y":1, "w":2}, + {"label":"K1E (B1,D4)", "x":15, "y":1}, + + {"label":"K20 (B2,B6)", "x":0, "y":2, "w":1.5}, + {"label":"K21 (B2,B7)", "x":1.5, "y":2}, + {"label":"K22 (B2,C0)", "x":2.5, "y":2}, + {"label":"K23 (B2,C1)", "x":3.5, "y":2}, + {"label":"K24 (B2,C2)", "x":4.5, "y":2}, + {"label":"K25 (B2,C3)", "x":5.5, "y":2}, + {"label":"K26 (B2,C4)", "x":6.5, "y":2}, + {"label":"K27 (B2,C5)", "x":7.5, "y":2}, + {"label":"K28 (B2,C6)", "x":8.5, "y":2}, + {"label":"K29 (B2,C7)", "x":9.5, "y":2}, + {"label":"K2A (B2,D0)", "x":10.5, "y":2}, + {"label":"K2B (B2,D1)", "x":11.5, "y":2}, + {"label":"K2C (B2,D2)", "x":12.5, "y":2}, + {"label":"K2D (B2,D3)", "x":13.5, "y":2, "w":1.5}, + {"label":"K2E (B2,D4)", "x":15, "y":2}, + + {"label":"K30 (B3,B6)", "x":0, "y":3, "w":1.75}, + {"label":"K31 (B3,B7)", "x":1.75, "y":3}, + {"label":"K32 (B3,C0)", "x":2.75, "y":3}, + {"label":"K33 (B3,C1)", "x":3.75, "y":3}, + {"label":"K34 (B3,C2)", "x":4.75, "y":3}, + {"label":"K35 (B3,C3)", "x":5.75, "y":3}, + {"label":"K36 (B3,C4)", "x":6.75, "y":3}, + {"label":"K37 (B3,C5)", "x":7.75, "y":3}, + {"label":"K38 (B3,C6)", "x":8.75, "y":3}, + {"label":"K39 (B3,C7)", "x":9.75, "y":3}, + {"label":"K3A (B3,D0)", "x":10.75, "y":3}, + {"label":"K3B (B3,D1)", "x":11.75, "y":3}, + {"label":"K3D (B3,D3)", "x":12.75, "y":3, "w":2.25}, + {"label":"K3E (B3,D4)", "x":15, "y":3}, + + {"label":"K40 (B4,B6)", "x":0, "y":4, "w":2.25}, + {"label":"K42 (B4,C0)", "x":2.25, "y":4}, + {"label":"K43 (B4,C1)", "x":3.25, "y":4}, + {"label":"K44 (B4,C2)", "x":4.25, "y":4}, + {"label":"K45 (B4,C3)", "x":5.25, "y":4}, + {"label":"K46 (B4,C4)", "x":6.25, "y":4}, + {"label":"K47 (B4,C5)", "x":7.25, "y":4}, + {"label":"K48 (B4,C6)", "x":8.25, "y":4}, + {"label":"K49 (B4,C7)", "x":9.25, "y":4}, + {"label":"K4A (B4,D0)", "x":10.25, "y":4}, + {"label":"K4B (B4,D1)", "x":11.25, "y":4}, + {"label":"K4C (B4,D2)", "x":12.25, "y":4, "w":1.75}, + {"label":"K4D (B4,D3)", "x":14, "y":4}, + {"label":"K4E (B4,D4)", "x":15, "y":4}, + + {"label":"K50 (B5,B6)", "x":0, "y":5, "w":1.25}, + {"label":"K51 (B5,B7)", "x":1.25, "y":5, "w":1.25}, + {"label":"K52 (B5,C0)", "x":2.5, "y":5, "w":1.25}, + {"label":"K56 (B5,C4)", "x":3.75, "y":5, "w":6.25}, + {"label":"K5A (B5,D0)", "x":10, "y":5, "w":1.25}, + {"label":"K5B (B5,D1)", "x":11.25, "y":5, "w":1.25}, + {"label":"K5C (B5,D2)", "x":13, "y":5}, + {"label":"K5D (B5,D3)", "x":14, "y":5}, + {"label":"K5E (B5,D4)", "x":15, "y":5} + ] + }, + "LAYOUT_tsangan_split_bs": { + "layout": [ + {"label":"K00 (B0,B6)", "x":0, "y":0}, + {"label":"K01 (B0,B7)", "x":1.5, "y":0}, + {"label":"K02 (B0,C0)", "x":2.5, "y":0}, + {"label":"K03 (B0,C1)", "x":3.5, "y":0}, + {"label":"K04 (B0,C2)", "x":4.5, "y":0}, + {"label":"K06 (B0,C4)", "x":6, "y":0}, + {"label":"K07 (B0,C5)", "x":7, "y":0}, + {"label":"K08 (B0,C6)", "x":8, "y":0}, + {"label":"K09 (B0,C7)", "x":9, "y":0}, + {"label":"K0A (B0,D0)", "x":10.5, "y":0}, + {"label":"K0B (B0,D1)", "x":11.5, "y":0}, + {"label":"K0C (B0,D2)", "x":12.5, "y":0}, + {"label":"K0D (B0,D3)", "x":13.5, "y":0}, + {"label":"K0E (B0,D4)", "x":15, "y":0}, + + {"label":"K10 (B1,B6)", "x":0, "y":1}, + {"label":"K11 (B1,B7)", "x":1, "y":1}, + {"label":"K12 (B1,C0)", "x":2, "y":1}, + {"label":"K13 (B1,C1)", "x":3, "y":1}, + {"label":"K14 (B1,C2)", "x":4, "y":1}, + {"label":"K15 (B1,C3)", "x":5, "y":1}, + {"label":"K16 (B1,C4)", "x":6, "y":1}, + {"label":"K17 (B1,C5)", "x":7, "y":1}, + {"label":"K18 (B1,C6)", "x":8, "y":1}, + {"label":"K19 (B1,C7)", "x":9, "y":1}, + {"label":"K1A (B1,D0)", "x":10, "y":1}, + {"label":"K1B (B1,D1)", "x":11, "y":1}, + {"label":"K1C (B1,D2)", "x":12, "y":1}, + {"label":"K1D (B1,D3)", "x":13, "y":1}, + {"label":"K3C (B3,D2)", "x":14, "y":1}, + {"label":"K1E (B1,D4)", "x":15, "y":1}, + + {"label":"K20 (B2,B6)", "x":0, "y":2, "w":1.5}, + {"label":"K21 (B2,B7)", "x":1.5, "y":2}, + {"label":"K22 (B2,C0)", "x":2.5, "y":2}, + {"label":"K23 (B2,C1)", "x":3.5, "y":2}, + {"label":"K24 (B2,C2)", "x":4.5, "y":2}, + {"label":"K25 (B2,C3)", "x":5.5, "y":2}, + {"label":"K26 (B2,C4)", "x":6.5, "y":2}, + {"label":"K27 (B2,C5)", "x":7.5, "y":2}, + {"label":"K28 (B2,C6)", "x":8.5, "y":2}, + {"label":"K29 (B2,C7)", "x":9.5, "y":2}, + {"label":"K2A (B2,D0)", "x":10.5, "y":2}, + {"label":"K2B (B2,D1)", "x":11.5, "y":2}, + {"label":"K2C (B2,D2)", "x":12.5, "y":2}, + {"label":"K2D (B2,D3)", "x":13.5, "y":2, "w":1.5}, + {"label":"K2E (B2,D4)", "x":15, "y":2}, + + {"label":"K30 (B3,B6)", "x":0, "y":3, "w":1.75}, + {"label":"K31 (B3,B7)", "x":1.75, "y":3}, + {"label":"K32 (B3,C0)", "x":2.75, "y":3}, + {"label":"K33 (B3,C1)", "x":3.75, "y":3}, + {"label":"K34 (B3,C2)", "x":4.75, "y":3}, + {"label":"K35 (B3,C3)", "x":5.75, "y":3}, + {"label":"K36 (B3,C4)", "x":6.75, "y":3}, + {"label":"K37 (B3,C5)", "x":7.75, "y":3}, + {"label":"K38 (B3,C6)", "x":8.75, "y":3}, + {"label":"K39 (B3,C7)", "x":9.75, "y":3}, + {"label":"K3A (B3,D0)", "x":10.75, "y":3}, + {"label":"K3B (B3,D1)", "x":11.75, "y":3}, + {"label":"K3D (B3,D3)", "x":12.75, "y":3, "w":2.25}, + {"label":"K3E (B3,D4)", "x":15, "y":3}, + + {"label":"K40 (B4,B6)", "x":0, "y":4, "w":2.25}, + {"label":"K42 (B4,C0)", "x":2.25, "y":4}, + {"label":"K43 (B4,C1)", "x":3.25, "y":4}, + {"label":"K44 (B4,C2)", "x":4.25, "y":4}, + {"label":"K45 (B4,C3)", "x":5.25, "y":4}, + {"label":"K46 (B4,C4)", "x":6.25, "y":4}, + {"label":"K47 (B4,C5)", "x":7.25, "y":4}, + {"label":"K48 (B4,C6)", "x":8.25, "y":4}, + {"label":"K49 (B4,C7)", "x":9.25, "y":4}, + {"label":"K4A (B4,D0)", "x":10.25, "y":4}, + {"label":"K4B (B4,D1)", "x":11.25, "y":4}, + {"label":"K4C (B4,D2)", "x":12.25, "y":4, "w":1.75}, + {"label":"K4D (B4,D3)", "x":14, "y":4}, + {"label":"K4E (B4,D4)", "x":15, "y":4}, + + {"label":"K50 (B5,B6)", "x":0, "y":5, "w":1.5}, + {"label":"K51 (B5,B7)", "x":1.5, "y":5}, + {"label":"K52 (B5,C0)", "x":2.5, "y":5, "w":1.5}, + {"label":"K56 (B5,C4)", "x":4, "y":5, "w":7}, + {"label":"K5B (B5,D1)", "x":11, "y":5, "w":1.5}, + {"label":"K5C (B5,D2)", "x":13, "y":5}, + {"label":"K5D (B5,D3)", "x":14, "y":5}, + {"label":"K5E (B5,D4)", "x":15, "y":5} + ] + }, + "LAYOUT_tsangan_2u_bs": { + "layout": [ + {"label":"K00 (B0,B6)", "x":0, "y":0}, + {"label":"K01 (B0,B7)", "x":1.5, "y":0}, + {"label":"K02 (B0,C0)", "x":2.5, "y":0}, + {"label":"K03 (B0,C1)", "x":3.5, "y":0}, + {"label":"K04 (B0,C2)", "x":4.5, "y":0}, + {"label":"K06 (B0,C4)", "x":6, "y":0}, + {"label":"K07 (B0,C5)", "x":7, "y":0}, + {"label":"K08 (B0,C6)", "x":8, "y":0}, + {"label":"K09 (B0,C7)", "x":9, "y":0}, + {"label":"K0A (B0,D0)", "x":10.5, "y":0}, + {"label":"K0B (B0,D1)", "x":11.5, "y":0}, + {"label":"K0C (B0,D2)", "x":12.5, "y":0}, + {"label":"K0D (B0,D3)", "x":13.5, "y":0}, + {"label":"K0E (B0,D4)", "x":15, "y":0}, + + {"label":"K10 (B1,B6)", "x":0, "y":1}, + {"label":"K11 (B1,B7)", "x":1, "y":1}, + {"label":"K12 (B1,C0)", "x":2, "y":1}, + {"label":"K13 (B1,C1)", "x":3, "y":1}, + {"label":"K14 (B1,C2)", "x":4, "y":1}, + {"label":"K15 (B1,C3)", "x":5, "y":1}, + {"label":"K16 (B1,C4)", "x":6, "y":1}, + {"label":"K17 (B1,C5)", "x":7, "y":1}, + {"label":"K18 (B1,C6)", "x":8, "y":1}, + {"label":"K19 (B1,C7)", "x":9, "y":1}, + {"label":"K1A (B1,D0)", "x":10, "y":1}, + {"label":"K1B (B1,D1)", "x":11, "y":1}, + {"label":"K1C (B1,D2)", "x":12, "y":1}, + {"label":"K1D (B1,D3)", "x":13, "y":1, "w":2}, + {"label":"K1E (B1,D4)", "x":15, "y":1}, + + {"label":"K20 (B2,B6)", "x":0, "y":2, "w":1.5}, + {"label":"K21 (B2,B7)", "x":1.5, "y":2}, + {"label":"K22 (B2,C0)", "x":2.5, "y":2}, + {"label":"K23 (B2,C1)", "x":3.5, "y":2}, + {"label":"K24 (B2,C2)", "x":4.5, "y":2}, + {"label":"K25 (B2,C3)", "x":5.5, "y":2}, + {"label":"K26 (B2,C4)", "x":6.5, "y":2}, + {"label":"K27 (B2,C5)", "x":7.5, "y":2}, + {"label":"K28 (B2,C6)", "x":8.5, "y":2}, + {"label":"K29 (B2,C7)", "x":9.5, "y":2}, + {"label":"K2A (B2,D0)", "x":10.5, "y":2}, + {"label":"K2B (B2,D1)", "x":11.5, "y":2}, + {"label":"K2C (B2,D2)", "x":12.5, "y":2}, + {"label":"K2D (B2,D3)", "x":13.5, "y":2, "w":1.5}, + {"label":"K2E (B2,D4)", "x":15, "y":2}, + + {"label":"K30 (B3,B6)", "x":0, "y":3, "w":1.75}, + {"label":"K31 (B3,B7)", "x":1.75, "y":3}, + {"label":"K32 (B3,C0)", "x":2.75, "y":3}, + {"label":"K33 (B3,C1)", "x":3.75, "y":3}, + {"label":"K34 (B3,C2)", "x":4.75, "y":3}, + {"label":"K35 (B3,C3)", "x":5.75, "y":3}, + {"label":"K36 (B3,C4)", "x":6.75, "y":3}, + {"label":"K37 (B3,C5)", "x":7.75, "y":3}, + {"label":"K38 (B3,C6)", "x":8.75, "y":3}, + {"label":"K39 (B3,C7)", "x":9.75, "y":3}, + {"label":"K3A (B3,D0)", "x":10.75, "y":3}, + {"label":"K3B (B3,D1)", "x":11.75, "y":3}, + {"label":"K3D (B3,D3)", "x":12.75, "y":3, "w":2.25}, + {"label":"K3E (B3,D4)", "x":15, "y":3}, + + {"label":"K40 (B4,B6)", "x":0, "y":4, "w":2.25}, + {"label":"K42 (B4,C0)", "x":2.25, "y":4}, + {"label":"K43 (B4,C1)", "x":3.25, "y":4}, + {"label":"K44 (B4,C2)", "x":4.25, "y":4}, + {"label":"K45 (B4,C3)", "x":5.25, "y":4}, + {"label":"K46 (B4,C4)", "x":6.25, "y":4}, + {"label":"K47 (B4,C5)", "x":7.25, "y":4}, + {"label":"K48 (B4,C6)", "x":8.25, "y":4}, + {"label":"K49 (B4,C7)", "x":9.25, "y":4}, + {"label":"K4A (B4,D0)", "x":10.25, "y":4}, + {"label":"K4B (B4,D1)", "x":11.25, "y":4}, + {"label":"K4C (B4,D2)", "x":12.25, "y":4, "w":1.75}, + {"label":"K4D (B4,D3)", "x":14, "y":4}, + {"label":"K4E (B4,D4)", "x":15, "y":4}, + + {"label":"K50 (B5,B6)", "x":0, "y":5, "w":1.5}, + {"label":"K51 (B5,B7)", "x":1.5, "y":5}, + {"label":"K52 (B5,C0)", "x":2.5, "y":5, "w":1.5}, + {"label":"K56 (B5,C4)", "x":4, "y":5, "w":7}, + {"label":"K5B (B5,D1)", "x":11, "y":5, "w":1.5}, + {"label":"K5C (B5,D2)", "x":13, "y":5}, + {"label":"K5D (B5,D3)", "x":14, "y":5}, + {"label":"K5E (B5,D4)", "x":15, "y":5} + ] } } - ,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/" } diff --git a/keyboards/mechlovin/hex4b/keymaps/default/keymap.c b/keyboards/mechlovin/hex4b/keymaps/default/keymap.c index 17c80ec55c..d298473263 100644 --- a/keyboards/mechlovin/hex4b/keymaps/default/keymap.c +++ b/keyboards/mechlovin/hex4b/keymaps/default/keymap.c @@ -16,7 +16,7 @@ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( + [0] = LAYOUT_split_bs( KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_SPC, KC_HOME, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, diff --git a/keyboards/mechlovin/hex4b/keymaps/via/keymap.c b/keyboards/mechlovin/hex4b/keymaps/via/keymap.c index d44a24f124..dc20ae1365 100644 --- a/keyboards/mechlovin/hex4b/keymaps/via/keymap.c +++ b/keyboards/mechlovin/hex4b/keymaps/via/keymap.c @@ -16,7 +16,7 @@ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( + [0] = LAYOUT_split_bs( KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_SPC, KC_HOME, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, @@ -24,7 +24,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_END, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ), - [1] = LAYOUT( + [1] = LAYOUT_split_bs( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, @@ -32,7 +32,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), - [2] = LAYOUT( + [2] = LAYOUT_split_bs( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, @@ -40,7 +40,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), - [3] = LAYOUT( + [3] = LAYOUT_split_bs( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, From 0b37e07f907cbb9654ecbc6449bb690f91f9ab20 Mon Sep 17 00:00:00 2001 From: Ryan Date: Thu, 30 Sep 2021 19:17:20 +1000 Subject: [PATCH 166/595] Remove redundant `MIDI_ENABLE = no` in keyboard-level rules.mk (#14649) --- keyboards/bantam44/rules.mk | 1 - keyboards/bpiphany/frosty_flake/keymaps/default/rules.mk | 1 - keyboards/bpiphany/frosty_flake/keymaps/tkl/rules.mk | 1 - keyboards/bpiphany/pegasushoof/keymaps/default/rules.mk | 1 - keyboards/bpiphany/pegasushoof/keymaps/default_jis/rules.mk | 1 - keyboards/bpiphany/tiger_lily/keymaps/default/rules.mk | 1 - keyboards/bpiphany/tiger_lily/keymaps/default_ansi/rules.mk | 1 - keyboards/bpiphany/tiger_lily/keymaps/via/rules.mk | 3 +-- keyboards/chimera_ergo/rules.mk | 1 - keyboards/chimera_ls/rules.mk | 1 - keyboards/chimera_ortho/rules.mk | 1 - keyboards/ckeys/handwire_101/rules.mk | 1 - keyboards/clueboard/card/keymaps/default/rules.mk | 1 - keyboards/clueboard/card/keymaps/rgb_effects/rules.mk | 1 - keyboards/comet46/rules.mk | 1 - keyboards/converter/ibm_terminal/keymaps/default/rules.mk | 1 - keyboards/cu75/keymaps/default/rules.mk | 1 - keyboards/cu75/keymaps/iso/rules.mk | 1 - keyboards/dichotomy/rules.mk | 1 - keyboards/dm9records/ergoinu/keymaps/default/rules.mk | 1 - keyboards/dm9records/ergoinu/keymaps/default_jis/rules.mk | 1 - keyboards/gh60/revc/rules.mk | 1 - keyboards/gh60/satan/keymaps/default/rules.mk | 1 - keyboards/handwired/kbod/keymaps/default/rules.mk | 1 - keyboards/handwired/ms_sculpt_mobile/keymaps/default/rules.mk | 1 - keyboards/handwired/pilcrow/keymaps/default/rules.mk | 1 - keyboards/handwired/promethium/keymaps/default/rules.mk | 1 - keyboards/handwired/retro_refit/rules.mk | 1 - keyboards/handwired/terminus_mini/keymaps/default/rules.mk | 1 - keyboards/hhkb/ansi/rules.mk | 2 -- keyboards/hhkb/jp/rules.mk | 2 -- keyboards/honeycomb/rules.mk | 1 - keyboards/jd40/rules.mk | 1 - keyboards/kinesis/keymaps/default/rules.mk | 1 - keyboards/kinesis/keymaps/default_pretty/rules.mk | 1 - keyboards/kona_classic/keymaps/ansi/rules.mk | 1 - keyboards/kona_classic/keymaps/ansi_arrows/rules.mk | 1 - keyboards/kona_classic/keymaps/ansi_arrows_lcap/rules.mk | 1 - keyboards/kona_classic/keymaps/ansi_split/rules.mk | 1 - keyboards/kona_classic/keymaps/ansi_split_arrows/rules.mk | 1 - keyboards/kona_classic/keymaps/default/rules.mk | 1 - keyboards/kona_classic/keymaps/iso/rules.mk | 1 - keyboards/kona_classic/keymaps/iso_arrows/rules.mk | 1 - keyboards/kona_classic/keymaps/iso_split/rules.mk | 1 - keyboards/kona_classic/keymaps/iso_split_arrows/rules.mk | 1 - keyboards/lfkeyboards/lfk87/keymaps/default/rules.mk | 1 - keyboards/lfkeyboards/lfk87/keymaps/iso/rules.mk | 1 - keyboards/lfkeyboards/mini1800/keymaps/default/rules.mk | 1 - keyboards/lily58/keymaps/default/rules.mk | 1 - keyboards/mitosis/rules.mk | 1 - keyboards/ok60/rules.mk | 1 - keyboards/redox_w/rules.mk | 1 - keyboards/ryanbaekr/rb86/rules.mk | 1 - keyboards/zinc/keymaps/default/rules.mk | 1 - 54 files changed, 1 insertion(+), 57 deletions(-) diff --git a/keyboards/bantam44/rules.mk b/keyboards/bantam44/rules.mk index 8ea08d0007..e61b995e62 100644 --- a/keyboards/bantam44/rules.mk +++ b/keyboards/bantam44/rules.mk @@ -16,4 +16,3 @@ COMMAND_ENABLE = yes # Commands for debug and configuration # SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend # NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI support diff --git a/keyboards/bpiphany/frosty_flake/keymaps/default/rules.mk b/keyboards/bpiphany/frosty_flake/keymaps/default/rules.mk index 179c2983bc..5e747a8360 100644 --- a/keyboards/bpiphany/frosty_flake/keymaps/default/rules.mk +++ b/keyboards/bpiphany/frosty_flake/keymaps/default/rules.mk @@ -9,7 +9,6 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/bpiphany/frosty_flake/keymaps/tkl/rules.mk b/keyboards/bpiphany/frosty_flake/keymaps/tkl/rules.mk index 09a140b687..f23faf1110 100644 --- a/keyboards/bpiphany/frosty_flake/keymaps/tkl/rules.mk +++ b/keyboards/bpiphany/frosty_flake/keymaps/tkl/rules.mk @@ -9,7 +9,6 @@ CONSOLE_ENABLE = yes # Console for debug(+400) COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/bpiphany/pegasushoof/keymaps/default/rules.mk b/keyboards/bpiphany/pegasushoof/keymaps/default/rules.mk index f82fad4ec4..fa42618f24 100644 --- a/keyboards/bpiphany/pegasushoof/keymaps/default/rules.mk +++ b/keyboards/bpiphany/pegasushoof/keymaps/default/rules.mk @@ -10,6 +10,5 @@ COMMAND_ENABLE = yes # Commands for debug and configuration CUSTOM_MATRIX = yes # Custom matrix file for the Pegasus Hoof due to the 2x74HC42 NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/bpiphany/pegasushoof/keymaps/default_jis/rules.mk b/keyboards/bpiphany/pegasushoof/keymaps/default_jis/rules.mk index 975974099c..250f7de789 100644 --- a/keyboards/bpiphany/pegasushoof/keymaps/default_jis/rules.mk +++ b/keyboards/bpiphany/pegasushoof/keymaps/default_jis/rules.mk @@ -10,6 +10,5 @@ COMMAND_ENABLE = yes # Commands for debug and configuration CUSTOM_MATRIX = yes # Custom matrix file for the Pegasus Hoof due to the 2x74HC42 NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/bpiphany/tiger_lily/keymaps/default/rules.mk b/keyboards/bpiphany/tiger_lily/keymaps/default/rules.mk index 177a98c80f..418f54602d 100644 --- a/keyboards/bpiphany/tiger_lily/keymaps/default/rules.mk +++ b/keyboards/bpiphany/tiger_lily/keymaps/default/rules.mk @@ -9,7 +9,6 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/bpiphany/tiger_lily/keymaps/default_ansi/rules.mk b/keyboards/bpiphany/tiger_lily/keymaps/default_ansi/rules.mk index ef87c3a95b..207eb8591b 100644 --- a/keyboards/bpiphany/tiger_lily/keymaps/default_ansi/rules.mk +++ b/keyboards/bpiphany/tiger_lily/keymaps/default_ansi/rules.mk @@ -9,7 +9,6 @@ CONSOLE_ENABLE = no # Console for debug(+400) COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/bpiphany/tiger_lily/keymaps/via/rules.mk b/keyboards/bpiphany/tiger_lily/keymaps/via/rules.mk index edd6deae72..b04378886c 100644 --- a/keyboards/bpiphany/tiger_lily/keymaps/via/rules.mk +++ b/keyboards/bpiphany/tiger_lily/keymaps/via/rules.mk @@ -6,7 +6,6 @@ CONSOLE_ENABLE = no COMMAND_ENABLE = yes NKRO_ENABLE = yes BACKLIGHT_ENABLE = no -MIDI_ENABLE = no AUDIO_ENABLE = no RGBLIGHT_ENABLE = no -SLEEP_LED_ENABLE = no \ No newline at end of file +SLEEP_LED_ENABLE = no diff --git a/keyboards/chimera_ergo/rules.mk b/keyboards/chimera_ergo/rules.mk index 84dff9db7d..56e3af6227 100644 --- a/keyboards/chimera_ergo/rules.mk +++ b/keyboards/chimera_ergo/rules.mk @@ -17,7 +17,6 @@ CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge # SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA # BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI support # # project specific files SRC += matrix.c serial_uart.c diff --git a/keyboards/chimera_ls/rules.mk b/keyboards/chimera_ls/rules.mk index a847c33099..02ff637b87 100644 --- a/keyboards/chimera_ls/rules.mk +++ b/keyboards/chimera_ls/rules.mk @@ -17,7 +17,6 @@ CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge # SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA # BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI support # project specific files SRC += matrix.c serial_uart.c diff --git a/keyboards/chimera_ortho/rules.mk b/keyboards/chimera_ortho/rules.mk index 35dba7f203..42258cead4 100644 --- a/keyboards/chimera_ortho/rules.mk +++ b/keyboards/chimera_ortho/rules.mk @@ -17,7 +17,6 @@ CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge # SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA # BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI support # project specific files SRC += matrix.c serial_uart.c diff --git a/keyboards/ckeys/handwire_101/rules.mk b/keyboards/ckeys/handwire_101/rules.mk index 7d99be0934..07eb32a083 100755 --- a/keyboards/ckeys/handwire_101/rules.mk +++ b/keyboards/ckeys/handwire_101/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI support AUDIO_ENABLE = no # Audio output diff --git a/keyboards/clueboard/card/keymaps/default/rules.mk b/keyboards/clueboard/card/keymaps/default/rules.mk index 2dc34d8f4d..7f764222e5 100644 --- a/keyboards/clueboard/card/keymaps/default/rules.mk +++ b/keyboards/clueboard/card/keymaps/default/rules.mk @@ -9,7 +9,6 @@ CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/clueboard/card/keymaps/rgb_effects/rules.mk b/keyboards/clueboard/card/keymaps/rgb_effects/rules.mk index 1f6a81e274..554eddaded 100644 --- a/keyboards/clueboard/card/keymaps/rgb_effects/rules.mk +++ b/keyboards/clueboard/card/keymaps/rgb_effects/rules.mk @@ -9,7 +9,6 @@ CONSOLE_ENABLE = yes # Console for debug(+400) COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/comet46/rules.mk b/keyboards/comet46/rules.mk index 2c4f42d065..d63a79aff2 100644 --- a/keyboards/comet46/rules.mk +++ b/keyboards/comet46/rules.mk @@ -17,7 +17,6 @@ CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge # SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA # BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI support # project specific files SRC += matrix.c \ diff --git a/keyboards/converter/ibm_terminal/keymaps/default/rules.mk b/keyboards/converter/ibm_terminal/keymaps/default/rules.mk index 8a364bd86d..d0be2c2cea 100644 --- a/keyboards/converter/ibm_terminal/keymaps/default/rules.mk +++ b/keyboards/converter/ibm_terminal/keymaps/default/rules.mk @@ -9,7 +9,6 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. PS2_USE_USART = yes diff --git a/keyboards/cu75/keymaps/default/rules.mk b/keyboards/cu75/keymaps/default/rules.mk index 13abea04ae..4bddc61e9a 100644 --- a/keyboards/cu75/keymaps/default/rules.mk +++ b/keyboards/cu75/keymaps/default/rules.mk @@ -10,7 +10,6 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Disable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes # Disable RGB underlight RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lefkeyboards, not WS2812 diff --git a/keyboards/cu75/keymaps/iso/rules.mk b/keyboards/cu75/keymaps/iso/rules.mk index a468c61b91..069e53f3c9 100644 --- a/keyboards/cu75/keymaps/iso/rules.mk +++ b/keyboards/cu75/keymaps/iso/rules.mk @@ -10,7 +10,6 @@ CONSOLE_ENABLE = yes # Console for debug(+400) COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # BACKLIGHT_ENABLE = no # Disable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = no # Disable RGB underlight RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lefkeyboards, not WS2812 diff --git a/keyboards/dichotomy/rules.mk b/keyboards/dichotomy/rules.mk index 935725a965..ae6a59e07f 100755 --- a/keyboards/dichotomy/rules.mk +++ b/keyboards/dichotomy/rules.mk @@ -18,7 +18,6 @@ CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge # SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA # BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI support # # project specific files SRC += matrix.c serial_uart.c diff --git a/keyboards/dm9records/ergoinu/keymaps/default/rules.mk b/keyboards/dm9records/ergoinu/keymaps/default/rules.mk index 36e836e0da..8741c24d87 100644 --- a/keyboards/dm9records/ergoinu/keymaps/default/rules.mk +++ b/keyboards/dm9records/ergoinu/keymaps/default/rules.mk @@ -10,7 +10,6 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. SWAP_HANDS_ENABLE = no # Enable one-hand typing diff --git a/keyboards/dm9records/ergoinu/keymaps/default_jis/rules.mk b/keyboards/dm9records/ergoinu/keymaps/default_jis/rules.mk index 09aea1892f..48418de471 100644 --- a/keyboards/dm9records/ergoinu/keymaps/default_jis/rules.mk +++ b/keyboards/dm9records/ergoinu/keymaps/default_jis/rules.mk @@ -10,7 +10,6 @@ CONSOLE_ENABLE = no # Console for debug(+400) COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. SWAP_HANDS_ENABLE = no # Enable one-hand typing diff --git a/keyboards/gh60/revc/rules.mk b/keyboards/gh60/revc/rules.mk index 3cb2f3bebc..30057a4571 100644 --- a/keyboards/gh60/revc/rules.mk +++ b/keyboards/gh60/revc/rules.mk @@ -17,6 +17,5 @@ KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key # SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI support LAYOUTS = 60_ansi 60_iso 60_ansi_split_bs_rshift 60_tsangan_hhkb diff --git a/keyboards/gh60/satan/keymaps/default/rules.mk b/keyboards/gh60/satan/keymaps/default/rules.mk index a8cc2fd82e..344a2850d8 100644 --- a/keyboards/gh60/satan/keymaps/default/rules.mk +++ b/keyboards/gh60/satan/keymaps/default/rules.mk @@ -9,7 +9,6 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/handwired/kbod/keymaps/default/rules.mk b/keyboards/handwired/kbod/keymaps/default/rules.mk index cfe14f46d7..bb1904fca1 100644 --- a/keyboards/handwired/kbod/keymaps/default/rules.mk +++ b/keyboards/handwired/kbod/keymaps/default/rules.mk @@ -9,7 +9,6 @@ CONSOLE_ENABLE = no # Console for debug(+400) COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/handwired/ms_sculpt_mobile/keymaps/default/rules.mk b/keyboards/handwired/ms_sculpt_mobile/keymaps/default/rules.mk index cca1ed9c12..c3e9c62a19 100644 --- a/keyboards/handwired/ms_sculpt_mobile/keymaps/default/rules.mk +++ b/keyboards/handwired/ms_sculpt_mobile/keymaps/default/rules.mk @@ -9,7 +9,6 @@ CONSOLE_ENABLE = no # Console for debug(+400) COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/handwired/pilcrow/keymaps/default/rules.mk b/keyboards/handwired/pilcrow/keymaps/default/rules.mk index cca1ed9c12..c3e9c62a19 100644 --- a/keyboards/handwired/pilcrow/keymaps/default/rules.mk +++ b/keyboards/handwired/pilcrow/keymaps/default/rules.mk @@ -9,7 +9,6 @@ CONSOLE_ENABLE = no # Console for debug(+400) COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/handwired/promethium/keymaps/default/rules.mk b/keyboards/handwired/promethium/keymaps/default/rules.mk index 05807b5777..4fd8baae27 100644 --- a/keyboards/handwired/promethium/keymaps/default/rules.mk +++ b/keyboards/handwired/promethium/keymaps/default/rules.mk @@ -11,7 +11,6 @@ CONSOLE_ENABLE = no # Console for debug(+400) COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output UNICODEMAP_ENABLE = yes BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID diff --git a/keyboards/handwired/retro_refit/rules.mk b/keyboards/handwired/retro_refit/rules.mk index 241bc75902..e4ac7ff623 100644 --- a/keyboards/handwired/retro_refit/rules.mk +++ b/keyboards/handwired/retro_refit/rules.mk @@ -17,4 +17,3 @@ KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key # SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI support diff --git a/keyboards/handwired/terminus_mini/keymaps/default/rules.mk b/keyboards/handwired/terminus_mini/keymaps/default/rules.mk index 8373126f78..79bfc30ab5 100644 --- a/keyboards/handwired/terminus_mini/keymaps/default/rules.mk +++ b/keyboards/handwired/terminus_mini/keymaps/default/rules.mk @@ -9,7 +9,6 @@ CONSOLE_ENABLE = no # Console for debug(+400) COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/hhkb/ansi/rules.mk b/keyboards/hhkb/ansi/rules.mk index 3f60f47d7b..6e2e81b0cf 100644 --- a/keyboards/hhkb/ansi/rules.mk +++ b/keyboards/hhkb/ansi/rules.mk @@ -17,8 +17,6 @@ CUSTOM_MATRIX = yes # Custom matrix file for the HHKB # SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend # NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI support - # HHKB_RN42_ENABLE = yes # Enable support for hasu's BT alt controller -- code borrowed from tmk source tree. diff --git a/keyboards/hhkb/jp/rules.mk b/keyboards/hhkb/jp/rules.mk index dda7ceb078..56187bb331 100644 --- a/keyboards/hhkb/jp/rules.mk +++ b/keyboards/hhkb/jp/rules.mk @@ -17,8 +17,6 @@ CUSTOM_MATRIX = yes # Custom matrix file for the HHKB # SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend # NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI support - # HHKB_RN42_ENABLE = yes # Enable support for hasu's BT alt controller -- code borrowed from tmk source tree. diff --git a/keyboards/honeycomb/rules.mk b/keyboards/honeycomb/rules.mk index 935725a965..ae6a59e07f 100755 --- a/keyboards/honeycomb/rules.mk +++ b/keyboards/honeycomb/rules.mk @@ -18,7 +18,6 @@ CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge # SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA # BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI support # # project specific files SRC += matrix.c serial_uart.c diff --git a/keyboards/jd40/rules.mk b/keyboards/jd40/rules.mk index ec15ee641d..358097e80d 100644 --- a/keyboards/jd40/rules.mk +++ b/keyboards/jd40/rules.mk @@ -17,5 +17,4 @@ KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key # SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work # BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI support RGBLIGHT_ENABLE = yes # Enable RGB Underglow diff --git a/keyboards/kinesis/keymaps/default/rules.mk b/keyboards/kinesis/keymaps/default/rules.mk index 177a98c80f..418f54602d 100644 --- a/keyboards/kinesis/keymaps/default/rules.mk +++ b/keyboards/kinesis/keymaps/default/rules.mk @@ -9,7 +9,6 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/kinesis/keymaps/default_pretty/rules.mk b/keyboards/kinesis/keymaps/default_pretty/rules.mk index 177a98c80f..418f54602d 100644 --- a/keyboards/kinesis/keymaps/default_pretty/rules.mk +++ b/keyboards/kinesis/keymaps/default_pretty/rules.mk @@ -9,7 +9,6 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/kona_classic/keymaps/ansi/rules.mk b/keyboards/kona_classic/keymaps/ansi/rules.mk index cb76c350e4..621b6749cd 100644 --- a/keyboards/kona_classic/keymaps/ansi/rules.mk +++ b/keyboards/kona_classic/keymaps/ansi/rules.mk @@ -25,7 +25,6 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI support AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/kona_classic/keymaps/ansi_arrows/rules.mk b/keyboards/kona_classic/keymaps/ansi_arrows/rules.mk index cb76c350e4..621b6749cd 100644 --- a/keyboards/kona_classic/keymaps/ansi_arrows/rules.mk +++ b/keyboards/kona_classic/keymaps/ansi_arrows/rules.mk @@ -25,7 +25,6 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI support AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/kona_classic/keymaps/ansi_arrows_lcap/rules.mk b/keyboards/kona_classic/keymaps/ansi_arrows_lcap/rules.mk index cb76c350e4..621b6749cd 100644 --- a/keyboards/kona_classic/keymaps/ansi_arrows_lcap/rules.mk +++ b/keyboards/kona_classic/keymaps/ansi_arrows_lcap/rules.mk @@ -25,7 +25,6 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI support AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/kona_classic/keymaps/ansi_split/rules.mk b/keyboards/kona_classic/keymaps/ansi_split/rules.mk index cb76c350e4..621b6749cd 100644 --- a/keyboards/kona_classic/keymaps/ansi_split/rules.mk +++ b/keyboards/kona_classic/keymaps/ansi_split/rules.mk @@ -25,7 +25,6 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI support AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/kona_classic/keymaps/ansi_split_arrows/rules.mk b/keyboards/kona_classic/keymaps/ansi_split_arrows/rules.mk index cb76c350e4..621b6749cd 100644 --- a/keyboards/kona_classic/keymaps/ansi_split_arrows/rules.mk +++ b/keyboards/kona_classic/keymaps/ansi_split_arrows/rules.mk @@ -25,7 +25,6 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI support AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/kona_classic/keymaps/default/rules.mk b/keyboards/kona_classic/keymaps/default/rules.mk index cb76c350e4..621b6749cd 100644 --- a/keyboards/kona_classic/keymaps/default/rules.mk +++ b/keyboards/kona_classic/keymaps/default/rules.mk @@ -25,7 +25,6 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI support AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/kona_classic/keymaps/iso/rules.mk b/keyboards/kona_classic/keymaps/iso/rules.mk index cb76c350e4..621b6749cd 100644 --- a/keyboards/kona_classic/keymaps/iso/rules.mk +++ b/keyboards/kona_classic/keymaps/iso/rules.mk @@ -25,7 +25,6 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI support AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/kona_classic/keymaps/iso_arrows/rules.mk b/keyboards/kona_classic/keymaps/iso_arrows/rules.mk index cb76c350e4..621b6749cd 100644 --- a/keyboards/kona_classic/keymaps/iso_arrows/rules.mk +++ b/keyboards/kona_classic/keymaps/iso_arrows/rules.mk @@ -25,7 +25,6 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI support AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/kona_classic/keymaps/iso_split/rules.mk b/keyboards/kona_classic/keymaps/iso_split/rules.mk index cb76c350e4..621b6749cd 100644 --- a/keyboards/kona_classic/keymaps/iso_split/rules.mk +++ b/keyboards/kona_classic/keymaps/iso_split/rules.mk @@ -25,7 +25,6 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI support AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/kona_classic/keymaps/iso_split_arrows/rules.mk b/keyboards/kona_classic/keymaps/iso_split_arrows/rules.mk index cb76c350e4..621b6749cd 100644 --- a/keyboards/kona_classic/keymaps/iso_split_arrows/rules.mk +++ b/keyboards/kona_classic/keymaps/iso_split_arrows/rules.mk @@ -25,7 +25,6 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI support AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/lfkeyboards/lfk87/keymaps/default/rules.mk b/keyboards/lfkeyboards/lfk87/keymaps/default/rules.mk index a08a652dd8..402b890b25 100644 --- a/keyboards/lfkeyboards/lfk87/keymaps/default/rules.mk +++ b/keyboards/lfkeyboards/lfk87/keymaps/default/rules.mk @@ -10,7 +10,6 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = yes # Audio output RGBLIGHT_ENABLE = yes # Enable RGB underlight RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lefkeyboards, not WS2812 diff --git a/keyboards/lfkeyboards/lfk87/keymaps/iso/rules.mk b/keyboards/lfkeyboards/lfk87/keymaps/iso/rules.mk index 8a89dab671..d880f9f156 100644 --- a/keyboards/lfkeyboards/lfk87/keymaps/iso/rules.mk +++ b/keyboards/lfkeyboards/lfk87/keymaps/iso/rules.mk @@ -10,7 +10,6 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = yes # Audio output RGBLIGHT_ENABLE = yes # Enable RGB underlight RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lefkeyboards, not WS2812 diff --git a/keyboards/lfkeyboards/mini1800/keymaps/default/rules.mk b/keyboards/lfkeyboards/mini1800/keymaps/default/rules.mk index f5cebe7078..18cf149822 100644 --- a/keyboards/lfkeyboards/mini1800/keymaps/default/rules.mk +++ b/keyboards/lfkeyboards/mini1800/keymaps/default/rules.mk @@ -10,7 +10,6 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = yes # Audio output RGBLIGHT_ENABLE = yes # Enable RGB underlight RGBLIGHT_CUSTOM_DRIVER = yes # RGB code is implemented in lefkeyboards, not WS2812 diff --git a/keyboards/lily58/keymaps/default/rules.mk b/keyboards/lily58/keymaps/default/rules.mk index be19dcf14c..021d013e03 100644 --- a/keyboards/lily58/keymaps/default/rules.mk +++ b/keyboards/lily58/keymaps/default/rules.mk @@ -9,7 +9,6 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. SWAP_HANDS_ENABLE = no # Enable one-hand typing diff --git a/keyboards/mitosis/rules.mk b/keyboards/mitosis/rules.mk index 02c042a4e4..c989d6d52e 100644 --- a/keyboards/mitosis/rules.mk +++ b/keyboards/mitosis/rules.mk @@ -17,7 +17,6 @@ CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge # SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA # BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI support UNICODE_ENABLE = yes # Unicode # # project specific files diff --git a/keyboards/ok60/rules.mk b/keyboards/ok60/rules.mk index cf59531458..e1e858b349 100644 --- a/keyboards/ok60/rules.mk +++ b/keyboards/ok60/rules.mk @@ -16,6 +16,5 @@ KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable the RGB backlight -MIDI_ENABLE = no # MIDI support LAYOUTS = 60_ansi 60_iso 60_hhkb diff --git a/keyboards/redox_w/rules.mk b/keyboards/redox_w/rules.mk index 84dff9db7d..56e3af6227 100644 --- a/keyboards/redox_w/rules.mk +++ b/keyboards/redox_w/rules.mk @@ -17,7 +17,6 @@ CUSTOM_MATRIX = yes # Remote matrix from the wireless bridge # SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA # BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI support # # project specific files SRC += matrix.c serial_uart.c diff --git a/keyboards/ryanbaekr/rb86/rules.mk b/keyboards/ryanbaekr/rb86/rules.mk index fb5c5c4129..20b467521e 100644 --- a/keyboards/ryanbaekr/rb86/rules.mk +++ b/keyboards/ryanbaekr/rb86/rules.mk @@ -18,5 +18,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow -MIDI_ENABLE = no # MIDI support AUDIO_ENABLE = no # Audio output diff --git a/keyboards/zinc/keymaps/default/rules.mk b/keyboards/zinc/keymaps/default/rules.mk index 83e1fed1eb..6fea7875a4 100644 --- a/keyboards/zinc/keymaps/default/rules.mk +++ b/keyboards/zinc/keymaps/default/rules.mk @@ -9,7 +9,6 @@ CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -MIDI_ENABLE = no # MIDI controls AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time. SWAP_HANDS_ENABLE = no # Enable one-hand typing From 292b7b3835c5518cdb90bc7d5b1d3030292ddbf8 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Thu, 30 Sep 2021 14:48:36 +0000 Subject: [PATCH 167/595] Remove firmware size impact notes from /rules.mk (#14652) --- keyboards/flehrad/downbubble/rules.mk | 6 +++--- keyboards/flehrad/numbrero/rules.mk | 6 +++--- keyboards/flehrad/tradestation/rules.mk | 6 +++--- keyboards/handwired/108key_trackpoint/rules.mk | 6 +++--- keyboards/handwired/412_64/rules.mk | 6 +++--- keyboards/handwired/aek64/rules.mk | 6 +++--- keyboards/handwired/arrow_pad/rules.mk | 6 +++--- keyboards/handwired/atreus50/rules.mk | 6 +++--- keyboards/handwired/cmd60/rules.mk | 6 +++--- keyboards/handwired/co60/rev1/rules.mk | 6 +++--- keyboards/handwired/co60/rev6/rules.mk | 6 +++--- keyboards/handwired/co60/rev7/rules.mk | 6 +++--- keyboards/handwired/dactyl/rules.mk | 6 +++--- keyboards/handwired/dactyl_left/rules.mk | 6 +++--- .../handwired/dactyl_manuform/dmote/62key/rules.mk | 4 ++-- keyboards/handwired/dactyl_promicro/rules.mk | 6 +++--- keyboards/handwired/daishi/rules.mk | 6 +++--- keyboards/handwired/datahand/rules.mk | 6 +++--- keyboards/handwired/fivethirteen/rules.mk | 6 +++--- keyboards/handwired/frenchdev/rules.mk | 6 +++--- keyboards/handwired/fruity60/rules.mk | 6 +++--- keyboards/handwired/gamenum/rules.mk | 6 +++--- keyboards/handwired/hacked_motospeed/rules.mk | 6 +++--- keyboards/handwired/hexon38/rules.mk | 6 +++--- keyboards/handwired/hnah40/rules.mk | 6 +++--- keyboards/handwired/ibm122m/rules.mk | 6 +++--- keyboards/handwired/jn68m/rules.mk | 6 +++--- keyboards/handwired/jopr/rules.mk | 6 +++--- keyboards/handwired/jot50/rules.mk | 6 +++--- keyboards/handwired/jotanck/rules.mk | 6 +++--- keyboards/handwired/jotpad16/rules.mk | 6 +++--- keyboards/handwired/kbod/rules.mk | 6 +++--- keyboards/handwired/lovelive9/rules.mk | 6 +++--- keyboards/handwired/magicforce61/rules.mk | 6 +++--- keyboards/handwired/magicforce68/rules.mk | 6 +++--- keyboards/handwired/mechboards_micropad/rules.mk | 6 +++--- keyboards/handwired/ms_sculpt_mobile/rules.mk | 6 +++--- keyboards/handwired/nicekey/rules.mk | 6 +++--- keyboards/handwired/not_so_minidox/rules.mk | 6 +++--- keyboards/handwired/numpad20/rules.mk | 6 +++--- keyboards/handwired/ortho5x13/rules.mk | 6 +++--- keyboards/handwired/owlet60/rules.mk | 6 +++--- keyboards/handwired/pilcrow/rules.mk | 6 +++--- keyboards/handwired/prime_exl/rules.mk | 6 +++--- keyboards/handwired/promethium/rules.mk | 6 +++--- keyboards/handwired/pteron/rules.mk | 6 +++--- keyboards/handwired/qc60/rules.mk | 6 +++--- keyboards/handwired/reddot/rules.mk | 6 +++--- keyboards/handwired/retro_refit/rules.mk | 6 +++--- keyboards/handwired/rs60/rules.mk | 6 +++--- keyboards/handwired/space_oddity/rules.mk | 6 +++--- keyboards/handwired/splittest/rules.mk | 6 +++--- keyboards/handwired/steamvan/rev1/rules.mk | 6 +++--- keyboards/handwired/tennie/rules.mk | 6 +++--- keyboards/handwired/terminus_mini/rules.mk | 6 +++--- keyboards/handwired/trackpoint/rules.mk | 6 +++--- keyboards/handwired/tritium_numpad/rules.mk | 10 +++++----- keyboards/handwired/xealous/rules.mk | 6 +++--- keyboards/wsk/pain27/rules.mk | 6 +++--- 59 files changed, 178 insertions(+), 178 deletions(-) diff --git a/keyboards/flehrad/downbubble/rules.mk b/keyboards/flehrad/downbubble/rules.mk index db4b61e0b5..db959254ff 100644 --- a/keyboards/flehrad/downbubble/rules.mk +++ b/keyboards/flehrad/downbubble/rules.mk @@ -8,9 +8,9 @@ BOOTLOADER = atmel-dfu # change yes to no to disable # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/flehrad/numbrero/rules.mk b/keyboards/flehrad/numbrero/rules.mk index eb9af6ea88..06898ee79f 100644 --- a/keyboards/flehrad/numbrero/rules.mk +++ b/keyboards/flehrad/numbrero/rules.mk @@ -8,9 +8,9 @@ BOOTLOADER = caterina # comment out to disable the options. # BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work diff --git a/keyboards/flehrad/tradestation/rules.mk b/keyboards/flehrad/tradestation/rules.mk index 15aa1f8a32..0b8cc74bf2 100644 --- a/keyboards/flehrad/tradestation/rules.mk +++ b/keyboards/flehrad/tradestation/rules.mk @@ -8,9 +8,9 @@ BOOTLOADER = caterina # change yes to no to disable # BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work diff --git a/keyboards/handwired/108key_trackpoint/rules.mk b/keyboards/handwired/108key_trackpoint/rules.mk index bb667098f2..32e013a28c 100644 --- a/keyboards/handwired/108key_trackpoint/rules.mk +++ b/keyboards/handwired/108key_trackpoint/rules.mk @@ -8,9 +8,9 @@ BOOTLOADER = halfkay # change yes to no to disable # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/handwired/412_64/rules.mk b/keyboards/handwired/412_64/rules.mk index 9199b0e4f2..f328e4f557 100644 --- a/keyboards/handwired/412_64/rules.mk +++ b/keyboards/handwired/412_64/rules.mk @@ -8,9 +8,9 @@ BOOTLOADER = atmel-dfu # change yes to no to disable # BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/handwired/aek64/rules.mk b/keyboards/handwired/aek64/rules.mk index 6aaa28686f..960a0eb07a 100644 --- a/keyboards/handwired/aek64/rules.mk +++ b/keyboards/handwired/aek64/rules.mk @@ -8,9 +8,9 @@ BOOTLOADER = halfkay # change to no to disable the options. # BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover - not yet supported in LUFA diff --git a/keyboards/handwired/arrow_pad/rules.mk b/keyboards/handwired/arrow_pad/rules.mk index c32eac4d33..e58bcc03a4 100644 --- a/keyboards/handwired/arrow_pad/rules.mk +++ b/keyboards/handwired/arrow_pad/rules.mk @@ -8,9 +8,9 @@ BOOTLOADER = halfkay # change yes to no to disable # BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/handwired/atreus50/rules.mk b/keyboards/handwired/atreus50/rules.mk index c92a77c078..de0d28fc02 100644 --- a/keyboards/handwired/atreus50/rules.mk +++ b/keyboards/handwired/atreus50/rules.mk @@ -9,9 +9,9 @@ BOOTLOADER = caterina # the appropriate keymap folder that will get included automatically # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality diff --git a/keyboards/handwired/cmd60/rules.mk b/keyboards/handwired/cmd60/rules.mk index 9f553fbce7..f03e4cf375 100644 --- a/keyboards/handwired/cmd60/rules.mk +++ b/keyboards/handwired/cmd60/rules.mk @@ -8,9 +8,9 @@ BOOTLOADER = halfkay # change yes to no to disable # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/handwired/co60/rev1/rules.mk b/keyboards/handwired/co60/rev1/rules.mk index 01076eb7fb..8301ebd7c1 100644 --- a/keyboards/handwired/co60/rev1/rules.mk +++ b/keyboards/handwired/co60/rev1/rules.mk @@ -8,9 +8,9 @@ BOOTLOADER = atmel-dfu # change yes to no to disable # BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/handwired/co60/rev6/rules.mk b/keyboards/handwired/co60/rev6/rules.mk index e60d18e551..ff752f1bc6 100644 --- a/keyboards/handwired/co60/rev6/rules.mk +++ b/keyboards/handwired/co60/rev6/rules.mk @@ -10,9 +10,9 @@ BOOTLOADER = stm32-dfu # BACKLIGHT_ENABLE = yes BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work AUDIO_ENABLE = no diff --git a/keyboards/handwired/co60/rev7/rules.mk b/keyboards/handwired/co60/rev7/rules.mk index b758498fe9..f58c4189a9 100644 --- a/keyboards/handwired/co60/rev7/rules.mk +++ b/keyboards/handwired/co60/rev7/rules.mk @@ -13,9 +13,9 @@ WS2812_DRIVER = spi # BACKLIGHT_ENABLE = yes BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work AUDIO_ENABLE = no diff --git a/keyboards/handwired/dactyl/rules.mk b/keyboards/handwired/dactyl/rules.mk index efba184c22..7d10d01cba 100644 --- a/keyboards/handwired/dactyl/rules.mk +++ b/keyboards/handwired/dactyl/rules.mk @@ -9,9 +9,9 @@ BOOTLOADER = halfkay # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite POINTING_DEVICE_ENABLE = no -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+8000) +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration CUSTOM_MATRIX = yes # Custom matrix file for the Dactyl NKRO_ENABLE = yes # USB Nkey Rollover diff --git a/keyboards/handwired/dactyl_left/rules.mk b/keyboards/handwired/dactyl_left/rules.mk index 8c5107285f..3388265b2f 100644 --- a/keyboards/handwired/dactyl_left/rules.mk +++ b/keyboards/handwired/dactyl_left/rules.mk @@ -8,9 +8,9 @@ BOOTLOADER = halfkay # change yes to no to disable # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/handwired/dactyl_manuform/dmote/62key/rules.mk b/keyboards/handwired/dactyl_manuform/dmote/62key/rules.mk index 28d0bfb5c5..a6a97a5c8e 100644 --- a/keyboards/handwired/dactyl_manuform/dmote/62key/rules.mk +++ b/keyboards/handwired/dactyl_manuform/dmote/62key/rules.mk @@ -1,5 +1,5 @@ # Build-process overrides for the DMOTE. -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control RGBLIGHT_ENABLE = yes # Needed for the C linker with lighting control. COMMAND_ENABLE = no # Not a good combo with Space Cadet shift. diff --git a/keyboards/handwired/dactyl_promicro/rules.mk b/keyboards/handwired/dactyl_promicro/rules.mk index bca7e712ab..b6353cf37f 100644 --- a/keyboards/handwired/dactyl_promicro/rules.mk +++ b/keyboards/handwired/dactyl_promicro/rules.mk @@ -9,9 +9,9 @@ BOOTLOADER = caterina # the appropriate keymap folder that will get included automatically # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality diff --git a/keyboards/handwired/daishi/rules.mk b/keyboards/handwired/daishi/rules.mk index b24281438c..7e5f287909 100644 --- a/keyboards/handwired/daishi/rules.mk +++ b/keyboards/handwired/daishi/rules.mk @@ -9,9 +9,9 @@ BOOTLOADER = atmel-dfu # the appropriate keymap folder that will get included automatically # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality diff --git a/keyboards/handwired/datahand/rules.mk b/keyboards/handwired/datahand/rules.mk index b2b5effef2..e42ec3021e 100644 --- a/keyboards/handwired/datahand/rules.mk +++ b/keyboards/handwired/datahand/rules.mk @@ -6,9 +6,9 @@ BOOTLOADER = halfkay # Build Options BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality diff --git a/keyboards/handwired/fivethirteen/rules.mk b/keyboards/handwired/fivethirteen/rules.mk index 9f553fbce7..f03e4cf375 100644 --- a/keyboards/handwired/fivethirteen/rules.mk +++ b/keyboards/handwired/fivethirteen/rules.mk @@ -8,9 +8,9 @@ BOOTLOADER = halfkay # change yes to no to disable # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/handwired/frenchdev/rules.mk b/keyboards/handwired/frenchdev/rules.mk index 258a3184d3..1a4cab63dc 100644 --- a/keyboards/handwired/frenchdev/rules.mk +++ b/keyboards/handwired/frenchdev/rules.mk @@ -8,9 +8,9 @@ BOOTLOADER = halfkay # comment out to disable the options. # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration CUSTOM_MATRIX = yes # Custom matrix file (taken and adapted from the ErgoDox EZ to handle custom number of columns) SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/handwired/fruity60/rules.mk b/keyboards/handwired/fruity60/rules.mk index dc90e758cd..a5ab76a314 100644 --- a/keyboards/handwired/fruity60/rules.mk +++ b/keyboards/handwired/fruity60/rules.mk @@ -11,9 +11,9 @@ BOOTLOADER = caterina # change yes to no to disable # BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/handwired/gamenum/rules.mk b/keyboards/handwired/gamenum/rules.mk index c09e23c7dc..0f5e7479f6 100644 --- a/keyboards/handwired/gamenum/rules.mk +++ b/keyboards/handwired/gamenum/rules.mk @@ -8,9 +8,9 @@ BOOTLOADER = caterina # change yes to no to disable # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/handwired/hacked_motospeed/rules.mk b/keyboards/handwired/hacked_motospeed/rules.mk index 403590921b..79bfe8a86a 100644 --- a/keyboards/handwired/hacked_motospeed/rules.mk +++ b/keyboards/handwired/hacked_motospeed/rules.mk @@ -8,9 +8,9 @@ BOOTLOADER = halfkay # change yes to no to disable # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/handwired/hexon38/rules.mk b/keyboards/handwired/hexon38/rules.mk index 1103f09914..774005f600 100644 --- a/keyboards/handwired/hexon38/rules.mk +++ b/keyboards/handwired/hexon38/rules.mk @@ -6,9 +6,9 @@ BOOTLOADER = halfkay # Enabled build options: BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work diff --git a/keyboards/handwired/hnah40/rules.mk b/keyboards/handwired/hnah40/rules.mk index e7c7843714..69b5017cac 100644 --- a/keyboards/handwired/hnah40/rules.mk +++ b/keyboards/handwired/hnah40/rules.mk @@ -8,9 +8,9 @@ BOOTLOADER = usbasploader # change yes to no to disable # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/handwired/ibm122m/rules.mk b/keyboards/handwired/ibm122m/rules.mk index d1425eff36..188c6964cf 100644 --- a/keyboards/handwired/ibm122m/rules.mk +++ b/keyboards/handwired/ibm122m/rules.mk @@ -8,9 +8,9 @@ BOOTLOADER = halfkay # change yes to no to disable # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/handwired/jn68m/rules.mk b/keyboards/handwired/jn68m/rules.mk index 544ecfafc1..4f07d21872 100644 --- a/keyboards/handwired/jn68m/rules.mk +++ b/keyboards/handwired/jn68m/rules.mk @@ -8,9 +8,9 @@ BOOTLOADER = atmel-dfu # change yes to no to disable # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/handwired/jopr/rules.mk b/keyboards/handwired/jopr/rules.mk index fc9ebe0ca0..a176f4ed58 100644 --- a/keyboards/handwired/jopr/rules.mk +++ b/keyboards/handwired/jopr/rules.mk @@ -8,9 +8,9 @@ BOOTLOADER = atmel-dfu # comment out to disable the options. # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work diff --git a/keyboards/handwired/jot50/rules.mk b/keyboards/handwired/jot50/rules.mk index a15affc1ad..176396dd7e 100644 --- a/keyboards/handwired/jot50/rules.mk +++ b/keyboards/handwired/jot50/rules.mk @@ -10,9 +10,9 @@ BOOTLOADER = caterina # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality diff --git a/keyboards/handwired/jotanck/rules.mk b/keyboards/handwired/jotanck/rules.mk index 63db50a5da..c2646d991c 100644 --- a/keyboards/handwired/jotanck/rules.mk +++ b/keyboards/handwired/jotanck/rules.mk @@ -10,9 +10,9 @@ BOOTLOADER = caterina # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality diff --git a/keyboards/handwired/jotpad16/rules.mk b/keyboards/handwired/jotpad16/rules.mk index 28564a10e6..90206294f8 100644 --- a/keyboards/handwired/jotpad16/rules.mk +++ b/keyboards/handwired/jotpad16/rules.mk @@ -10,9 +10,9 @@ BOOTLOADER = caterina # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality diff --git a/keyboards/handwired/kbod/rules.mk b/keyboards/handwired/kbod/rules.mk index 579d200338..63a9b256d0 100644 --- a/keyboards/handwired/kbod/rules.mk +++ b/keyboards/handwired/kbod/rules.mk @@ -8,9 +8,9 @@ BOOTLOADER = caterina # change yes to no to disable # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/handwired/lovelive9/rules.mk b/keyboards/handwired/lovelive9/rules.mk index 58817921b1..33250a81bb 100644 --- a/keyboards/handwired/lovelive9/rules.mk +++ b/keyboards/handwired/lovelive9/rules.mk @@ -9,9 +9,9 @@ BOOTLOADER = caterina # the appropriate keymap folder that will get included automatically # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality diff --git a/keyboards/handwired/magicforce61/rules.mk b/keyboards/handwired/magicforce61/rules.mk index 10f3a790a4..d3dcd6478c 100644 --- a/keyboards/handwired/magicforce61/rules.mk +++ b/keyboards/handwired/magicforce61/rules.mk @@ -8,9 +8,9 @@ BOOTLOADER = halfkay # change yes to no to disable # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/handwired/magicforce68/rules.mk b/keyboards/handwired/magicforce68/rules.mk index c09e23c7dc..0f5e7479f6 100644 --- a/keyboards/handwired/magicforce68/rules.mk +++ b/keyboards/handwired/magicforce68/rules.mk @@ -8,9 +8,9 @@ BOOTLOADER = caterina # change yes to no to disable # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/handwired/mechboards_micropad/rules.mk b/keyboards/handwired/mechboards_micropad/rules.mk index fb3377dd33..5799903139 100644 --- a/keyboards/handwired/mechboards_micropad/rules.mk +++ b/keyboards/handwired/mechboards_micropad/rules.mk @@ -8,9 +8,9 @@ BOOTLOADER = caterina # change yes to no to disable # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/handwired/ms_sculpt_mobile/rules.mk b/keyboards/handwired/ms_sculpt_mobile/rules.mk index b9a32489aa..36961d9434 100644 --- a/keyboards/handwired/ms_sculpt_mobile/rules.mk +++ b/keyboards/handwired/ms_sculpt_mobile/rules.mk @@ -13,9 +13,9 @@ else endif BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/handwired/nicekey/rules.mk b/keyboards/handwired/nicekey/rules.mk index 913b5f6ae4..45ade5409a 100644 --- a/keyboards/handwired/nicekey/rules.mk +++ b/keyboards/handwired/nicekey/rules.mk @@ -8,9 +8,9 @@ BOOTLOADER = caterina # comment out to disable the options. # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration #SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend #NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA diff --git a/keyboards/handwired/not_so_minidox/rules.mk b/keyboards/handwired/not_so_minidox/rules.mk index cc1f09dbfc..f322b2c914 100644 --- a/keyboards/handwired/not_so_minidox/rules.mk +++ b/keyboards/handwired/not_so_minidox/rules.mk @@ -9,9 +9,9 @@ BOOTLOADER = caterina # the appropriate keymap folder that will get included automatically # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = no # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = no # Audio control and System control +CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality diff --git a/keyboards/handwired/numpad20/rules.mk b/keyboards/handwired/numpad20/rules.mk index 9f553fbce7..f03e4cf375 100644 --- a/keyboards/handwired/numpad20/rules.mk +++ b/keyboards/handwired/numpad20/rules.mk @@ -8,9 +8,9 @@ BOOTLOADER = halfkay # change yes to no to disable # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/handwired/ortho5x13/rules.mk b/keyboards/handwired/ortho5x13/rules.mk index 9f553fbce7..f03e4cf375 100644 --- a/keyboards/handwired/ortho5x13/rules.mk +++ b/keyboards/handwired/ortho5x13/rules.mk @@ -8,9 +8,9 @@ BOOTLOADER = halfkay # change yes to no to disable # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/handwired/owlet60/rules.mk b/keyboards/handwired/owlet60/rules.mk index a0f2b1d178..8767e9dac1 100644 --- a/keyboards/handwired/owlet60/rules.mk +++ b/keyboards/handwired/owlet60/rules.mk @@ -8,9 +8,9 @@ BOOTLOADER = caterina # change yes to no to disable # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/handwired/pilcrow/rules.mk b/keyboards/handwired/pilcrow/rules.mk index 9f553fbce7..f03e4cf375 100644 --- a/keyboards/handwired/pilcrow/rules.mk +++ b/keyboards/handwired/pilcrow/rules.mk @@ -8,9 +8,9 @@ BOOTLOADER = halfkay # change yes to no to disable # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/handwired/prime_exl/rules.mk b/keyboards/handwired/prime_exl/rules.mk index f3466bf1cc..11754021f4 100644 --- a/keyboards/handwired/prime_exl/rules.mk +++ b/keyboards/handwired/prime_exl/rules.mk @@ -8,9 +8,9 @@ BOOTLOADER = atmel-dfu # change yes to no to disable # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/handwired/promethium/rules.mk b/keyboards/handwired/promethium/rules.mk index ec49c49b14..bd3b04a2d7 100644 --- a/keyboards/handwired/promethium/rules.mk +++ b/keyboards/handwired/promethium/rules.mk @@ -12,9 +12,9 @@ BOOTLOADER = caterina # the appropriate keymap folder that will get included automatically # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality diff --git a/keyboards/handwired/pteron/rules.mk b/keyboards/handwired/pteron/rules.mk index e961aab6ed..0fcfa90cc7 100644 --- a/keyboards/handwired/pteron/rules.mk +++ b/keyboards/handwired/pteron/rules.mk @@ -8,9 +8,9 @@ BOOTLOADER = caterina # comment out to disable the options. # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work diff --git a/keyboards/handwired/qc60/rules.mk b/keyboards/handwired/qc60/rules.mk index e7bbc0e394..9c560cefea 100644 --- a/keyboards/handwired/qc60/rules.mk +++ b/keyboards/handwired/qc60/rules.mk @@ -9,9 +9,9 @@ BOOTLOADER = caterina # the appropriate keymap folder that will get included automatically # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality diff --git a/keyboards/handwired/reddot/rules.mk b/keyboards/handwired/reddot/rules.mk index 579d200338..63a9b256d0 100755 --- a/keyboards/handwired/reddot/rules.mk +++ b/keyboards/handwired/reddot/rules.mk @@ -8,9 +8,9 @@ BOOTLOADER = caterina # change yes to no to disable # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/handwired/retro_refit/rules.mk b/keyboards/handwired/retro_refit/rules.mk index e4ac7ff623..a37162eff8 100644 --- a/keyboards/handwired/retro_refit/rules.mk +++ b/keyboards/handwired/retro_refit/rules.mk @@ -8,9 +8,9 @@ BOOTLOADER = halfkay # comment out to disable the options. # BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/handwired/rs60/rules.mk b/keyboards/handwired/rs60/rules.mk index 76070f7f44..f10fa03c32 100644 --- a/keyboards/handwired/rs60/rules.mk +++ b/keyboards/handwired/rs60/rules.mk @@ -8,9 +8,9 @@ BOOTLOADER = qmk-dfu # comment out to disable the options. # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = no # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = no # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work diff --git a/keyboards/handwired/space_oddity/rules.mk b/keyboards/handwired/space_oddity/rules.mk index f55552ad89..1edf4bf18d 100644 --- a/keyboards/handwired/space_oddity/rules.mk +++ b/keyboards/handwired/space_oddity/rules.mk @@ -8,9 +8,9 @@ BOOTLOADER = caterina # comment out to disable the options. # BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work diff --git a/keyboards/handwired/splittest/rules.mk b/keyboards/handwired/splittest/rules.mk index 4b64b74253..0f12d4cd85 100644 --- a/keyboards/handwired/splittest/rules.mk +++ b/keyboards/handwired/splittest/rules.mk @@ -3,9 +3,9 @@ # the appropriate keymap folder that will get included automatically # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality diff --git a/keyboards/handwired/steamvan/rev1/rules.mk b/keyboards/handwired/steamvan/rev1/rules.mk index 097b210821..8557e3b045 100644 --- a/keyboards/handwired/steamvan/rev1/rules.mk +++ b/keyboards/handwired/steamvan/rev1/rules.mk @@ -13,9 +13,9 @@ WS2812_DRIVER = spi # BACKLIGHT_ENABLE = yes BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work AUDIO_ENABLE = no diff --git a/keyboards/handwired/tennie/rules.mk b/keyboards/handwired/tennie/rules.mk index 22713268d7..97c3db2a41 100644 --- a/keyboards/handwired/tennie/rules.mk +++ b/keyboards/handwired/tennie/rules.mk @@ -8,9 +8,9 @@ BOOTLOADER = caterina # change yes to no to disable # BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/handwired/terminus_mini/rules.mk b/keyboards/handwired/terminus_mini/rules.mk index 59b793d889..87dcc07500 100644 --- a/keyboards/handwired/terminus_mini/rules.mk +++ b/keyboards/handwired/terminus_mini/rules.mk @@ -8,9 +8,9 @@ BOOTLOADER = halfkay # change yes to no to disable # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work diff --git a/keyboards/handwired/trackpoint/rules.mk b/keyboards/handwired/trackpoint/rules.mk index f6272177e3..46e1d60f92 100644 --- a/keyboards/handwired/trackpoint/rules.mk +++ b/keyboards/handwired/trackpoint/rules.mk @@ -6,9 +6,9 @@ BOOTLOADER = halfkay BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = no # USB Nkey Rollover diff --git a/keyboards/handwired/tritium_numpad/rules.mk b/keyboards/handwired/tritium_numpad/rules.mk index 60f075dc5e..82dcfd94c0 100644 --- a/keyboards/handwired/tritium_numpad/rules.mk +++ b/keyboards/handwired/tritium_numpad/rules.mk @@ -8,13 +8,13 @@ BOOTLOADER = caterina # comment out to disable the options. # BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality (+4870) -BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality (+1150) +RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality AUDIO_ENABLE = no LAYOUTS = numpad_6x4 ortho_6x4 diff --git a/keyboards/handwired/xealous/rules.mk b/keyboards/handwired/xealous/rules.mk index 2d23ce46da..0d1bb863da 100644 --- a/keyboards/handwired/xealous/rules.mk +++ b/keyboards/handwired/xealous/rules.mk @@ -9,9 +9,9 @@ BOOTLOADER = caterina # the appropriate keymap folder that will get included automatically # BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = no # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = yes # Console for debug(+400) +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality diff --git a/keyboards/wsk/pain27/rules.mk b/keyboards/wsk/pain27/rules.mk index 1fa251a82d..cb1b3044fd 100644 --- a/keyboards/wsk/pain27/rules.mk +++ b/keyboards/wsk/pain27/rules.mk @@ -8,9 +8,9 @@ BOOTLOADER = caterina # comment out to disable the options. # BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys(+4700) -EXTRAKEY_ENABLE = yes # Audio control and System control(+450) -CONSOLE_ENABLE = no # Console for debug(+400) +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work From 0be3cd3e2b8a7c5996f39166ab4a8afb986251ee Mon Sep 17 00:00:00 2001 From: npspears <40127181+npspears@users.noreply.github.com> Date: Thu, 30 Sep 2021 09:50:18 -0500 Subject: [PATCH 168/595] Quark_LP- change MCU and RGB (#14650) --- keyboards/checkerboards/quark_lp/rules.mk | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/keyboards/checkerboards/quark_lp/rules.mk b/keyboards/checkerboards/quark_lp/rules.mk index 9906266f48..584b7bdd8f 100644 --- a/keyboards/checkerboards/quark_lp/rules.mk +++ b/keyboards/checkerboards/quark_lp/rules.mk @@ -1,5 +1,5 @@ # MCU name -MCU = atmega32u4 +MCU = atmega32u2 # Bootloader selection BOOTLOADER = atmel-dfu @@ -17,5 +17,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output From 52cb19713b794be130563ac20923e8e70e83971e Mon Sep 17 00:00:00 2001 From: Purdea Andrei Date: Fri, 1 Oct 2021 00:24:19 +0300 Subject: [PATCH 169/595] Fix documentation for NO_HAPTIC_MOD and NO_HAPTIC_FN features. (#14180) --- docs/feature_haptic_feedback.md | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/docs/feature_haptic_feedback.md b/docs/feature_haptic_feedback.md index 469c9c7981..1f36f5b054 100644 --- a/docs/feature_haptic_feedback.md +++ b/docs/feature_haptic_feedback.md @@ -168,10 +168,16 @@ This mode sets continuous haptic feedback with the option to increase or decreas The Haptic Exclusion is implemented as `__attribute__((weak)) bool get_haptic_enabled_key(uint16_t keycode, keyrecord_t *record)` in haptic.c. This allows a re-definition at the required level with the specific requirement / exclusion. ### NO_HAPTIC_MOD -With the entry of `#define NO_HAPTIC_MOD` in config.h, modifiers from Left Control to Right GUI will not trigger a feedback. This also includes modifiers in a Mod Tap configuration. +With the entry of `#define NO_HAPTIC_MOD` in config.h, the following keys will not trigger feedback: + +* Usual modifier keys such as Control/Shift/Alt/Gui (For example `KC_LCTRL`) +* `MO()` momentary keys. See also [Layers](feature_layers.md). +* `LT()` layer tap keys, when held to activate a layer. However when tapped, and the key is quickly released, and sends a keycode, haptic feedback is still triggered. +* `TT()` layer tap toggle keys, when held to activate a layer. However when tapped `TAPPING_TOGGLE` times to permanently toggle the layer, on the last tap haptic feedback is still triggered. +* `MT()` mod tap keys, when held to keep a usual modifier key pressed. However when tapped, and the key is quickly released, and sends a keycode, haptic feedback is still triggered. See also [Mod-Tap](mod_tap.md). ### NO_HAPTIC_FN -With the entry of `#define NO_HAPTIC_FN` in config.h, layer keys will not rigger a feedback. +With the entry of `#define NO_HAPTIC_FN` in config.h, deprecated `fn_actions` type function keys will not trigger a feedback. ### NO_HAPTIC_ALPHA With the entry of `#define NO_HAPTIC_ALPHA` in config.h, none of the alpha keys (A ... Z) will trigger a feedback. From 1a9e7b95abbae3ca81b40c561850a2a321864418 Mon Sep 17 00:00:00 2001 From: Ryan Date: Fri, 1 Oct 2021 08:14:37 +1000 Subject: [PATCH 170/595] Change `MK66F18` -> `MK66FX1M0` (#14659) --- data/schemas/keyboard.jsonschema | 2 +- docs/compatible_microcontrollers.md | 1 + keyboards/kinesis/kint36/rules.mk | 4 ++-- lib/python/qmk/constants.py | 2 +- quantum/mcu_selection.mk | 2 +- 5 files changed, 6 insertions(+), 5 deletions(-) diff --git a/data/schemas/keyboard.jsonschema b/data/schemas/keyboard.jsonschema index 27507c78a3..b6b5e411fe 100644 --- a/data/schemas/keyboard.jsonschema +++ b/data/schemas/keyboard.jsonschema @@ -13,7 +13,7 @@ }, "processor": { "type": "string", - "enum": ["cortex-m0", "cortex-m0plus", "cortex-m3", "cortex-m4", "MKL26Z64", "MK20DX128", "MK20DX256", "MK66F18", "STM32F042", "STM32F072", "STM32F103", "STM32F303", "STM32F401", "STM32F405", "STM32F407", "STM32F411", "STM32F446", "STM32G431", "STM32G474", "STM32L412", "STM32L422", "STM32L433", "STM32L443", "atmega16u2", "atmega32u2", "atmega16u4", "atmega32u4", "at90usb162", "at90usb646", "at90usb647", "at90usb1286", "at90usb1287", "atmega32a", "atmega328p", "atmega328", "attiny85", "unknown"] + "enum": ["cortex-m0", "cortex-m0plus", "cortex-m3", "cortex-m4", "MKL26Z64", "MK20DX128", "MK20DX256", "MK66FX1M0", "STM32F042", "STM32F072", "STM32F103", "STM32F303", "STM32F401", "STM32F405", "STM32F407", "STM32F411", "STM32F446", "STM32G431", "STM32G474", "STM32L412", "STM32L422", "STM32L433", "STM32L443", "atmega16u2", "atmega32u2", "atmega16u4", "atmega32u4", "at90usb162", "at90usb646", "at90usb647", "at90usb1286", "at90usb1287", "atmega32a", "atmega328p", "atmega328", "attiny85", "unknown"] }, "audio": { "type": "object", diff --git a/docs/compatible_microcontrollers.md b/docs/compatible_microcontrollers.md index 0ad5d48214..f4aab5f5bd 100644 --- a/docs/compatible_microcontrollers.md +++ b/docs/compatible_microcontrollers.md @@ -43,6 +43,7 @@ You can also use any ARM chip with USB that [ChibiOS](https://www.chibios.org) s * [MKL26Z64](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/kl-series-cortex-m0-plus/kinetis-kl2x-72-96-mhz-usb-ultra-low-power-microcontrollers-mcus-based-on-arm-cortex-m0-plus-core:KL2x) * [MK20DX128](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/k-series-cortex-m4/k2x-usb/kinetis-k20-50-mhz-full-speed-usb-mixed-signal-integration-microcontrollers-based-on-arm-cortex-m4-core:K20_50) * [MK20DX256](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/k-series-cortex-m4/k2x-usb/kinetis-k20-72-mhz-full-speed-usb-mixed-signal-integration-microcontrollers-mcus-based-on-arm-cortex-m4-core:K20_72) + * [MK66FX1M0](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/k-series-cortex-m4/k6x-ethernet/kinetis-k66-180-mhz-dual-high-speed-full-speed-usbs-2mb-flash-microcontrollers-mcus-based-on-arm-cortex-m4-core:K66_180) ## Atmel ATSAM diff --git a/keyboards/kinesis/kint36/rules.mk b/keyboards/kinesis/kint36/rules.mk index cf58cb9134..d495568dd3 100644 --- a/keyboards/kinesis/kint36/rules.mk +++ b/keyboards/kinesis/kint36/rules.mk @@ -1,5 +1,5 @@ -BOARD = PJRC_TEENSY_3_6 -MCU = MK66F18 +# MCU name +MCU = MK66FX1M0 # Debounce eagerly (report change immediately), keep per-key timers. We can use # this because the kinT does not have to deal with noise. diff --git a/lib/python/qmk/constants.py b/lib/python/qmk/constants.py index 71a6c91c77..bfcd4064ac 100644 --- a/lib/python/qmk/constants.py +++ b/lib/python/qmk/constants.py @@ -13,7 +13,7 @@ QMK_FIRMWARE_UPSTREAM = 'qmk/qmk_firmware' MAX_KEYBOARD_SUBFOLDERS = 5 # Supported processor types -CHIBIOS_PROCESSORS = 'cortex-m0', 'cortex-m0plus', 'cortex-m3', 'cortex-m4', 'MKL26Z64', 'MK20DX128', 'MK20DX256', 'MK66F18', 'STM32F042', 'STM32F072', 'STM32F103', 'STM32F303', 'STM32F401', 'STM32F407', 'STM32F411', 'STM32F446', 'STM32G431', 'STM32G474', 'STM32L412', 'STM32L422', 'STM32L433', 'STM32L443' +CHIBIOS_PROCESSORS = 'cortex-m0', 'cortex-m0plus', 'cortex-m3', 'cortex-m4', 'MKL26Z64', 'MK20DX128', 'MK20DX256', 'MK66FX1M0', 'STM32F042', 'STM32F072', 'STM32F103', 'STM32F303', 'STM32F401', 'STM32F407', 'STM32F411', 'STM32F446', 'STM32G431', 'STM32G474', 'STM32L412', 'STM32L422', 'STM32L433', 'STM32L443' LUFA_PROCESSORS = 'at90usb162', 'atmega16u2', 'atmega32u2', 'atmega16u4', 'atmega32u4', 'at90usb646', 'at90usb647', 'at90usb1286', 'at90usb1287', None VUSB_PROCESSORS = 'atmega32a', 'atmega328p', 'atmega328', 'attiny85' diff --git a/quantum/mcu_selection.mk b/quantum/mcu_selection.mk index 48c53e4da6..92e3a7c923 100644 --- a/quantum/mcu_selection.mk +++ b/quantum/mcu_selection.mk @@ -81,7 +81,7 @@ ifneq ($(findstring MK20DX256, $(MCU)),) BOARD ?= PJRC_TEENSY_3_1 endif -ifneq ($(findstring MK66F18, $(MCU)),) +ifneq ($(findstring MK66FX1M0, $(MCU)),) # Cortex version MCU = cortex-m4 From e54a57d32a55609727ad9e9ca9c4954f9a727798 Mon Sep 17 00:00:00 2001 From: umi <57262844+umi-umi@users.noreply.github.com> Date: Fri, 1 Oct 2021 17:24:53 +0900 Subject: [PATCH 171/595] [Docs] update Japanese translation of mod_tap.md (#13981) * update mod_tap.md translation * add id on config_options.md and update text based on comments --- docs/ja/config_options.md | 2 +- docs/ja/mod_tap.md | 17 +++++++++++------ 2 files changed, 12 insertions(+), 7 deletions(-) diff --git a/docs/ja/config_options.md b/docs/ja/config_options.md index 6d7c477172..18fe9489b9 100644 --- a/docs/ja/config_options.md +++ b/docs/ja/config_options.md @@ -141,7 +141,7 @@ QMK での全ての利用可能な設定にはデフォルトがあります。 * `#define STRICT_LAYER_RELEASE` * キーリリースがどのレイヤーから来たのかを覚えるのではなく、現在のレイヤースタックを使って強制的に評価されるようにします (高度なケースに使われます) -## 設定可能な挙動 +## 設定可能な挙動 :id=behaviors-that-can-be-configured * `#define TAPPING_TERM 200` * タップがホールドになるまでの時間。500以上に設定された場合、タップ期間中にタップされたキーもホールドになります。(訳注: PERMISSIVE_HOLDも参照) diff --git a/docs/ja/mod_tap.md b/docs/ja/mod_tap.md index 371870abd6..1d96ed1ee8 100644 --- a/docs/ja/mod_tap.md +++ b/docs/ja/mod_tap.md @@ -1,8 +1,8 @@ # モッドタップ モッドタップキー `MT(mod, kc)` は、押したままの時にモディファイアのように機能し、タップされた時に通常のキーのように振舞います。別の言い方をすると、タップした時に Escape を送信しますが、押したままの時に Control あるいは Shift キーとして機能するキーを持つことができます。 @@ -42,7 +42,10 @@ MT(MOD_LCTL | MOD_LSFT, KC_ESC) | `RSFT_T(kc)` | | 押したままの場合は右 Shift、タップした場合は `kc` | | `RALT_T(kc)` | `ROPT_T(kc)`, `ALGR_T(kc)` | 押したままの場合は右 Alt、タップした場合は `kc` | | `RGUI_T(kc)` | `RCMD_T(kc)`, `RWIN_T(kc)` | 押したままの場合は右 GUI、タップした場合は `kc` | -| `SGUI_T(kc)` | `SCMD_T(kc)`, `SWIN_T(kc)` | 押したままの場合は左 Shift と左 GUI、タップした場合は `kc` | +| `LSG_T(kc)` | `SGUI_T(kc)`, `SCMD_T(kc)`, `SWIN_T(kc)` | 押したままの場合は左 Shift と左 GUI、タップした場合は `kc` | +| `LAG_T(kc)` | | 押したままの場合は左 Alt と左 GUI、タップした場合は `kc` | +| `RSG_T(kc)` | | 押したままの場合は右 Shift と右 GUI、タップした場合は `kc` | +| `RAG_T(kc)` | | 押したままの場合は右 Alt と右 GUI、タップした場合は `kc` | | `LCA_T(kc)` | | 押したままの場合は左 Control と左 Alt、タップした場合は `kc` | | `LSA_T(kc)` | | 押したままの場合は左 Shift と Alt、タップした場合は `kc` | | `RSA_T(kc)` | `SAGR_T(kc)` | 押したままの場合は右 Shift と Alt (AltGr)、タップした場合は `kc` | @@ -55,11 +58,13 @@ MT(MOD_LCTL | MOD_LSFT, KC_ESC) ## 注意事項 -残念ながら、キーコードで指定されたモディファイアは無視されるため、これらのキーコードはモッドタップまたはレイヤータップで使うことができません。 +現在のところ、`MT()` の引数 `kc` は[基本的なキーコードセット](ja/keycodes_basic.md)に制限されています。つまり、`LCTL()`、`KC_TILD`、あるいは `0xFF` より大きなキーコードを使うことができません。これは、QMK が16ビットのキーコードを使うためです。3ビットは機能の識別のために使われ、1ビットは右または左の mod を選択するために使われ、4ビットはどの mod かを区別するために使われ、キーコードには8ビットしか残されていません。さらに、モッドタップで少なくとも1つの右手用のモディファイアが指定された場合、指定された全てのモディファイアが右手用になるため、2つをうまく組み合わせて一致させることはできません。例えば、左 Control と右 Shift は、右 Control と右 Shift になります。 -さらに、Windows でリモートデスクトップ接続を使う場合に、問題が発生する場合があります。これらのコードはシフトを非常に高速に送信するため、リモートデスクトップはコードを見逃すかもしれません。 +これを拡張してもせいぜい複雑になるだけでしょう。32ビットキーコードに移行すると、これの多くが解決されますが、キーマップマトリックスが使用する領域が2倍になります。また、問題が起きる可能性もあります。タップしたキーコードにモディファイアを適用する必要がある場合は、[タップダンス](ja/feature_tap_dance.md#example-5)を使うことができます。 -これを修正するには、リモートデスクトップ接続を開き、「オプションの表示」を開き、「ローカル リソース」タブを開きます。キーボードセクションで、ドロップダウンを「このコンピューター」に変更します。これにより問題が修正され、キャラクタが正しく動作するようになります。 +さらに、Windows でリモートデスクトップ接続を使う場合に、問題が発生する場合があります。なぜならば、これらのキーコードは人よりも速くキーイベントを送信するため、リモートデスクトップがキーコードを見落とすかもしれないからです。 +この問題を解決するには、リモートデスクトップ接続を開いて「オプションの表示」をクリックし、「ローカル リソース」タブを開きます。キーボードセクションで、ドロップダウンを「このコンピューター」に変更します。これで問題が解決され、文字が正しく機能するようになります。 +[`TAP_CODE_DELAY`](ja/config_options.md#behaviors-that-can-be-configured) を増やすことで緩和することもできます。 ## 他のリソース From bed7625f93efab7be5461a1ca24e4a54f7b4202b Mon Sep 17 00:00:00 2001 From: negatv <91559584+negatv@users.noreply.github.com> Date: Fri, 1 Oct 2021 18:32:53 -0400 Subject: [PATCH 172/595] Add FIRMWARE_FORMAT = hex for /keyboards/kinesis/kint36 and /keyboards/kinesis/kint41 (#14665) * Specify hex as the default FIRMWARE_FORMAT which is copied to qmk_firmware root folder * Specify hex as the default FIRMWARE_FORMAT which is copied to qmk_firmware root folder Co-authored-by: sadkins --- keyboards/kinesis/kint36/rules.mk | 3 +++ keyboards/kinesis/kint41/rules.mk | 3 +++ 2 files changed, 6 insertions(+) diff --git a/keyboards/kinesis/kint36/rules.mk b/keyboards/kinesis/kint36/rules.mk index cf58cb9134..4f33583124 100644 --- a/keyboards/kinesis/kint36/rules.mk +++ b/keyboards/kinesis/kint36/rules.mk @@ -4,3 +4,6 @@ MCU = MK66F18 # Debounce eagerly (report change immediately), keep per-key timers. We can use # this because the kinT does not have to deal with noise. DEBOUNCE_TYPE = sym_eager_pk + +#Specify firmware format that is copied to root qmk_firmware folder +FIRMWARE_FORMAT = hex diff --git a/keyboards/kinesis/kint41/rules.mk b/keyboards/kinesis/kint41/rules.mk index 4d77da4271..2681ff6724 100644 --- a/keyboards/kinesis/kint41/rules.mk +++ b/keyboards/kinesis/kint41/rules.mk @@ -10,3 +10,6 @@ ARMV = 7 # this because the Cherry MX keyswitches on the Kinesis only produce noise while # pressed. DEBOUNCE_TYPE = sym_eager_pk + +#Specify firmware format that is copied to root qmk_firmware folder +FIRMWARE_FORMAT = hex From 54b8d6a89182390533ccd1cb715fbaf59720bf3e Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Fri, 1 Oct 2021 17:13:15 -0700 Subject: [PATCH 173/595] [Keyboard] Convert ZSA's Moonlander keyboard to matrix lite (#14667) --- keyboards/moonlander/matrix.c | 140 +++++++--------------------------- keyboards/moonlander/rules.mk | 3 +- 2 files changed, 28 insertions(+), 115 deletions(-) diff --git a/keyboards/moonlander/matrix.c b/keyboards/moonlander/matrix.c index 8f2610fc6c..782f131a50 100644 --- a/keyboards/moonlander/matrix.c +++ b/keyboards/moonlander/matrix.c @@ -16,55 +16,26 @@ * along with this program. If not, see . */ - - -#include -#include -#include -#include -#include "timer.h" -#include "wait.h" -#include "print.h" -#include "matrix.h" -#include "action.h" -#include "keycode.h" -#include #include "moonlander.h" #include "i2c_master.h" -#include "debounce.h" /* #define MATRIX_ROW_PINS { B10, B11, B12, B13, B14, B15 } outputs #define MATRIX_COL_PINS { A0, A1, A2, A3, A6, A7, B0 } inputs */ /* matrix state(1:on, 0:off) */ -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing_right[MATRIX_COLS]; -static bool debouncing = false; -static uint16_t debouncing_time = 0; -static bool debouncing_right = false; -static uint16_t debouncing_time_right = 0; +extern matrix_row_t matrix[MATRIX_ROWS]; // debounced values +extern matrix_row_t raw_matrix[MATRIX_ROWS]; // raw values +static matrix_row_t raw_matrix_right[MATRIX_COLS]; #define ROWS_PER_HAND (MATRIX_ROWS / 2) - -#ifndef MATRIX_IO_DELAY -# define MATRIX_IO_DELAY 20 +#ifndef MOONLANDER_I2C_TIMEOUT +# define MOONLANDER_I2C_TIMEOUT 100 #endif extern bool mcp23018_leds[3]; extern bool is_launching; -__attribute__((weak)) void matrix_init_user(void) {} - -__attribute__((weak)) void matrix_scan_user(void) {} - -__attribute__((weak)) void matrix_init_kb(void) { matrix_init_user(); } - -__attribute__((weak)) void matrix_scan_kb(void) { matrix_scan_user(); } - -__attribute__((weak)) void matrix_io_delay(void) { wait_us(MATRIX_IO_DELAY); } - bool mcp23018_initd = false; static uint8_t mcp23018_reset_loop; @@ -81,14 +52,14 @@ void mcp23018_init(void) { mcp23018_tx[1] = 0b00000000; // A is output mcp23018_tx[2] = 0b00111111; // B is inputs - if (MSG_OK != i2c_transmit(MCP23018_DEFAULT_ADDRESS << 1, mcp23018_tx, 3, I2C_TIMEOUT)) { + if (MSG_OK != i2c_transmit(MCP23018_DEFAULT_ADDRESS << 1, mcp23018_tx, 3, MOONLANDER_I2C_TIMEOUT)) { dprintf("error hori\n"); } else { mcp23018_tx[0] = 0x0C; // GPPUA mcp23018_tx[1] = 0b10000000; // A is not pulled-up mcp23018_tx[2] = 0b11111111; // B is pulled-up - if (MSG_OK != i2c_transmit(MCP23018_DEFAULT_ADDRESS << 1, mcp23018_tx, 3, I2C_TIMEOUT)) { + if (MSG_OK != i2c_transmit(MCP23018_DEFAULT_ADDRESS << 1, mcp23018_tx, 3, MOONLANDER_I2C_TIMEOUT)) { dprintf("error hori\n"); } else { mcp23018_initd = is_launching = true; @@ -96,10 +67,9 @@ void mcp23018_init(void) { } } -void matrix_init(void) { +void matrix_init_custom(void) { dprintf("matrix init\n"); // debug_matrix = true; - // outputs setPinOutput(B10); setPinOutput(B11); @@ -117,16 +87,10 @@ void matrix_init(void) { setPinInputLow(A7); setPinInputLow(B0); - memset(matrix, 0, MATRIX_ROWS * sizeof(matrix_row_t)); - memset(matrix_debouncing, 0, MATRIX_ROWS * sizeof(matrix_row_t)); - memset(matrix_debouncing_right, 0, MATRIX_COLS * sizeof(matrix_row_t)); - mcp23018_init(); - - matrix_init_quantum(); } -uint8_t matrix_scan(void) { +bool matrix_scan_custom(matrix_row_t current_matrix[]) { bool changed = false; // Try to re-init right side @@ -151,7 +115,7 @@ uint8_t matrix_scan(void) { matrix_row_t data = 0; // actual matrix for (uint8_t row = 0; row <= ROWS_PER_HAND; row++) { - // strobe row + // strobe row switch (row) { case 0: writePinHigh(B10); break; case 1: writePinHigh(B11); break; @@ -172,7 +136,7 @@ uint8_t matrix_scan(void) { mcp23018_tx[1] = (0b01111111 & ~(1 << (row))) | ((uint8_t)!mcp23018_leds[2] << 7); // activate row mcp23018_tx[2] = ((uint8_t)!mcp23018_leds[1] << 6) | ((uint8_t)!mcp23018_leds[0] << 7); // activate row - if (MSG_OK != i2c_transmit(MCP23018_DEFAULT_ADDRESS << 1, mcp23018_tx, 3, I2C_TIMEOUT)) { + if (MSG_OK != i2c_transmit(MCP23018_DEFAULT_ADDRESS << 1, mcp23018_tx, 3, MOONLANDER_I2C_TIMEOUT)) { dprintf("error hori\n"); mcp23018_initd = false; } @@ -180,22 +144,23 @@ uint8_t matrix_scan(void) { // read col mcp23018_tx[0] = 0x13; // GPIOB - if (MSG_OK != i2c_readReg(MCP23018_DEFAULT_ADDRESS << 1, mcp23018_tx[0], &mcp23018_rx[0], 1, I2C_TIMEOUT)) { + if (MSG_OK != i2c_readReg(MCP23018_DEFAULT_ADDRESS << 1, mcp23018_tx[0], &mcp23018_rx[0], 1, MOONLANDER_I2C_TIMEOUT)) { dprintf("error vert\n"); mcp23018_initd = false; } data = ~(mcp23018_rx[0] & 0b00111111); // data = 0x01; + } else { + data = 0; + } - if (matrix_debouncing_right[row] != data) { - matrix_debouncing_right[row] = data; - debouncing_right = true; - debouncing_time_right = timer_read(); - changed = true; - } + if (raw_matrix_right[row] != data) { + raw_matrix_right[row] = data; + changed = true; } + // left side if (row < ROWS_PER_HAND) { // i2c comm incur enough wait time @@ -224,79 +189,28 @@ uint8_t matrix_scan(void) { case 6: break; } - if (matrix_debouncing[row] != data) { - matrix_debouncing[row] = data; - debouncing = true; - debouncing_time = timer_read(); + if (current_matrix[row] != data) { + current_matrix[row] = data; changed = true; } } } - - // Debounce both hands - if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCE) { - for (int row = 0; row < ROWS_PER_HAND; row++) { - matrix[row] = matrix_debouncing[row]; - } - debouncing = false; - } - - if (debouncing_right && timer_elapsed(debouncing_time_right) > DEBOUNCE && mcp23018_initd) { - for (int row = 0; row < ROWS_PER_HAND; row++) { - matrix[11 - row] = 0; - for (int col = 0; col < MATRIX_COLS; col++) { - matrix[11 - row] |= ((matrix_debouncing_right[6 - col] & (1 << row) ? 1 : 0) << col); - } - } - debouncing_right = false; - } - - matrix_scan_quantum(); - - return (uint8_t)changed; -} - -bool matrix_is_on(uint8_t row, uint8_t col) { return (matrix[row] & (1 << col)); } - -matrix_row_t matrix_get_row(uint8_t row) { return matrix[row]; } - -void matrix_print(void) { - dprintf("\nr/c 01234567\n"); - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - dprintf("%X0: ", row); - matrix_row_t data = matrix_get_row(row); - for (int col = 0; col < MATRIX_COLS; col++) { - if (data & (1 << col)) - dprintf("1"); - else - dprintf("0"); + for (uint8_t row = 0; row < ROWS_PER_HAND; row++) { + current_matrix[11 - row] = 0; + for (uint8_t col = 0; col < MATRIX_COLS; col++) { + current_matrix[11 - row] |= ((raw_matrix_right[6 - col] & (1 << row) ? 1 : 0) << col); } - dprintf("\n"); } + return changed; } // DO NOT REMOVE // Needed for proper wake/sleep void matrix_power_up(void) { bool temp_launching = is_launching; - // outputs - setPinOutput(B10); - setPinOutput(B11); - setPinOutput(B12); - setPinOutput(B13); - setPinOutput(B14); - setPinOutput(B15); - // inputs - setPinInputLow(A0); - setPinInputLow(A1); - setPinInputLow(A2); - setPinInputLow(A3); - setPinInputLow(A6); - setPinInputLow(A7); - setPinInputLow(B0); + matrix_init_custom(); - mcp23018_init(); is_launching = temp_launching; if (!is_launching) { ML_LED_1(false); diff --git a/keyboards/moonlander/rules.mk b/keyboards/moonlander/rules.mk index 23bf7b7087..ed448ff434 100644 --- a/keyboards/moonlander/rules.mk +++ b/keyboards/moonlander/rules.mk @@ -19,8 +19,7 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = yes # Audio output -CUSTOM_MATRIX = yes -DEBOUNCE_TYPE = custom +CUSTOM_MATRIX = lite SWAP_HANDS_ENABLE = yes RGB_MATRIX_ENABLE = yes RGB_MATRIX_DRIVER = IS31FL3731 From 5b644af4155d2eae0005ed11f604f7b14dfa7456 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Fri, 1 Oct 2021 19:11:34 -0700 Subject: [PATCH 174/595] [Keyboard] Enable Proton C defaults for SplitKB Kyria (#14490) Co-authored-by: Ryan --- .../splitkb/kyria/keymaps/drashna/rules.mk | 8 ++--- keyboards/splitkb/kyria/readme.md | 22 +++++++++++++- keyboards/splitkb/kyria/rev1/config.h | 27 ++++++++++++----- .../splitkb/kyria/rev1/proton_c/chconf.h | 22 ++++++++++++++ .../splitkb/kyria/rev1/proton_c/halconf.h | 22 ++++++++++++++ .../splitkb/kyria/rev1/proton_c/mcuconf.h | 29 +++++++++++++++++++ .../splitkb/kyria/rev1/proton_c/proton_c.c | 17 +++++++++++ .../splitkb/kyria/rev1/proton_c/proton_c.h | 19 ++++++++++++ .../splitkb/kyria/rev1/proton_c/rules.mk | 5 ++++ keyboards/splitkb/kyria/rev1/rev1.h | 3 ++ 10 files changed, 162 insertions(+), 12 deletions(-) create mode 100644 keyboards/splitkb/kyria/rev1/proton_c/chconf.h create mode 100644 keyboards/splitkb/kyria/rev1/proton_c/halconf.h create mode 100644 keyboards/splitkb/kyria/rev1/proton_c/mcuconf.h create mode 100644 keyboards/splitkb/kyria/rev1/proton_c/proton_c.c create mode 100644 keyboards/splitkb/kyria/rev1/proton_c/proton_c.h create mode 100644 keyboards/splitkb/kyria/rev1/proton_c/rules.mk diff --git a/keyboards/splitkb/kyria/keymaps/drashna/rules.mk b/keyboards/splitkb/kyria/keymaps/drashna/rules.mk index b51cc1b626..f2ae5a1919 100644 --- a/keyboards/splitkb/kyria/keymaps/drashna/rules.mk +++ b/keyboards/splitkb/kyria/keymaps/drashna/rules.mk @@ -12,11 +12,11 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # USB Nkey Rollover UNICODE_ENABLE = no # Unicode KEY_LOCK_ENABLE = no +CTPC = yes - -BOOTLOADER = hid -BOOTLOADER_SIZE = 512 -PROGRAM_CMD = $(HID_BOOTLOADER_CLI) -mmcu=$(MCU) -w -v $(BUILD_DIR)/$(TARGET).hex +# BOOTLOADER = hid +# BOOTLOADER_SIZE = 512 +# PROGRAM_CMD = $(HID_BOOTLOADER_CLI) -mmcu=$(MCU) -w -v $(BUILD_DIR)/$(TARGET).hex # TAP_DANCE_ENABLE = yes WPM_ENABLE = yes diff --git a/keyboards/splitkb/kyria/readme.md b/keyboards/splitkb/kyria/readme.md index 5ce652589c..7ecf3946f7 100644 --- a/keyboards/splitkb/kyria/readme.md +++ b/keyboards/splitkb/kyria/readme.md @@ -10,7 +10,8 @@ Hardware Availability: [splitkb.com](https://splitkb.com) and partners. Make example for this keyboard (after setting up your build environment): - make splitkb/kyria:default + make splitkb/kyria/rev1:default + make splitkb/kyria/rev1/proton_c:default Example of flashing this keyboard: @@ -19,3 +20,22 @@ Example of flashing this keyboard: See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). A build guide for the Kyria can be found at [docs.splitkb.com](https://docs.splitkb.com/hc/en-us/articles/360010552059-Kyria-Build-Guide-Introduction). + +## Proton C Conversion Guide + +If you're one of the lucky people to have Proton Cs to use with their Kyria, there are a couple of caveats to getting this working. + +1. You need to have 2x Proton Cs, as you cannot mix and match with Pro Micros or Elite C's. They both need to be Proton Cs. +2. You'll need to do some modding to enable proper support with the Proton C. + +By design, the Kyria uses every available pin on the Pro Micro footprint. This includes using D3 (RX) for RGB. This poses a challenge with using the Proton C, since it needs both the TX and RX pins. The Proton C needs both pins, especially if you plan on using Full Duplex Serial. + +To fix this, you need to break off the last header position on the right-hand side on the footprint. This is the `TX0/D3` pad. Leave this pad without a header connected to. + +From the A9 pin on the Proton C, you want to run a wire from it to the `SDA + Extra Data` pad near the TRRS jack on the PCB. This will allow for proper, full duplex communication over the TRRS cable. + +To get RGB working properly, as well, you want to run a wire from the `A3` pin on the Proton C, next to the GND and DFU pin, right under the USB port. Run this to the `TX0/D3` pad (the one you left without a header pin on the PCB). + +Once you've done that, you can solder in the Proton C. and flash it. + +![Proton C](https://i.imgur.com/nICqWLo.jpg) diff --git a/keyboards/splitkb/kyria/rev1/config.h b/keyboards/splitkb/kyria/rev1/config.h index a330dfc10f..e19e8dfa9c 100644 --- a/keyboards/splitkb/kyria/rev1/config.h +++ b/keyboards/splitkb/kyria/rev1/config.h @@ -57,18 +57,31 @@ along with this program. If not, see . /* * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. */ -#define SOFT_SERIAL_PIN D2 -#define RGB_DI_PIN D3 +#if defined(CONVERT_TO_PROTON_C) +# define SERIAL_USART_FULL_DUPLEX // Enable full duplex operation mode. +# define SERIAL_USART_PIN_SWAP // Swap TX and RX pins if keyboard is master halve. +# define SERIAL_USART_DRIVER SD1 // USART driver of TX pin. default: SD1 +# define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 +# define SERIAL_USART_TX_PIN D3 +# define SERIAL_USART_RX_PIN D2 + +# define RGB_DI_PIN PAL_LINE(GPIOA, 3) +# define WS2812_PWM_DRIVER PWMD2 // default: PWMD2 +# define WS2812_PWM_CHANNEL 4 // default: 2 +# define WS2812_PWM_PAL_MODE 1 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2 +# define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. +# define WS2812_DMA_CHANNEL 2 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. +# define WS2812_DMAMUX_ID STM32_DMAMUX1_TIM2_UP // DMAMUX configuration for TIMx_UP -- only required if your MCU has a DMAMUX peripheral, see the respective reference manual for the appropriate values for your MCU. +#else +# define RGB_DI_PIN D3 +# define SOFT_SERIAL_PIN D2 +#endif + #define RGBLED_SPLIT \ { 10, 10 } #define RGBLED_NUM 20 -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - #ifdef OLED_ENABLE # define OLED_DISPLAY_128X64 # define SPLIT_OLED_ENABLE diff --git a/keyboards/splitkb/kyria/rev1/proton_c/chconf.h b/keyboards/splitkb/kyria/rev1/proton_c/chconf.h new file mode 100644 index 0000000000..7ca1d3d243 --- /dev/null +++ b/keyboards/splitkb/kyria/rev1/proton_c/chconf.h @@ -0,0 +1,22 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#define CH_CFG_ST_RESOLUTION 16 +#define CH_CFG_ST_FREQUENCY 10000 + +#include_next "chconf.h" diff --git a/keyboards/splitkb/kyria/rev1/proton_c/halconf.h b/keyboards/splitkb/kyria/rev1/proton_c/halconf.h new file mode 100644 index 0000000000..99f2e11b9a --- /dev/null +++ b/keyboards/splitkb/kyria/rev1/proton_c/halconf.h @@ -0,0 +1,22 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#define HAL_USE_I2C TRUE +#define HAL_USE_PWM TRUE +#define HAL_USE_SERIAL TRUE + +#include_next diff --git a/keyboards/splitkb/kyria/rev1/proton_c/mcuconf.h b/keyboards/splitkb/kyria/rev1/proton_c/mcuconf.h new file mode 100644 index 0000000000..58348af390 --- /dev/null +++ b/keyboards/splitkb/kyria/rev1/proton_c/mcuconf.h @@ -0,0 +1,29 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include_next + +#undef STM32_PWM_USE_TIM2 +#define STM32_PWM_USE_TIM2 TRUE +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 FALSE + +#undef STM32_SERIAL_USE_USART1 +#define STM32_SERIAL_USE_USART1 TRUE + +#undef STM32_ST_USE_TIMER +#define STM32_ST_USE_TIMER 3 diff --git a/keyboards/splitkb/kyria/rev1/proton_c/proton_c.c b/keyboards/splitkb/kyria/rev1/proton_c/proton_c.c new file mode 100644 index 0000000000..628fabb2e5 --- /dev/null +++ b/keyboards/splitkb/kyria/rev1/proton_c/proton_c.c @@ -0,0 +1,17 @@ +/* Copyright 2019 Thomas Baart + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "proton_c.h" diff --git a/keyboards/splitkb/kyria/rev1/proton_c/proton_c.h b/keyboards/splitkb/kyria/rev1/proton_c/proton_c.h new file mode 100644 index 0000000000..718f5636ff --- /dev/null +++ b/keyboards/splitkb/kyria/rev1/proton_c/proton_c.h @@ -0,0 +1,19 @@ +/* Copyright 2019 Thomas Baart + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "rev1.h" diff --git a/keyboards/splitkb/kyria/rev1/proton_c/rules.mk b/keyboards/splitkb/kyria/rev1/proton_c/rules.mk new file mode 100644 index 0000000000..9e0942398f --- /dev/null +++ b/keyboards/splitkb/kyria/rev1/proton_c/rules.mk @@ -0,0 +1,5 @@ +WS2812_DRIVER = pwm +SERIAL_DRIVER = usart +AUDIO_ENABLE = no +LTO_ENABLE = no +CONVERT_TO_PROTON_C = yes diff --git a/keyboards/splitkb/kyria/rev1/rev1.h b/keyboards/splitkb/kyria/rev1/rev1.h index bf9864fe36..8a5fbeb21d 100644 --- a/keyboards/splitkb/kyria/rev1/rev1.h +++ b/keyboards/splitkb/kyria/rev1/rev1.h @@ -16,6 +16,9 @@ #pragma once #include "kyria.h" +#ifdef KEYBOARD_splitkb_kyria_rev1_proton_c +# include "proton_c.h" +#endif /* This a shortcut to help you visually see your layout. * From 79ad30a9d59c897b8aefb4dad755d74d9f32f15f Mon Sep 17 00:00:00 2001 From: john-ezra <47311764+john-ezra@users.noreply.github.com> Date: Sat, 2 Oct 2021 07:50:55 -0700 Subject: [PATCH 175/595] [Keymap] Updates to Personal Kyria Keymap (#14669) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- .../splitkb/kyria/keymaps/john-ezra/config.h | 22 +- .../kyria/keymaps/john-ezra/glcdfont.c | 276 +++++++++ .../splitkb/kyria/keymaps/john-ezra/keymap.c | 130 +++-- .../splitkb/kyria/keymaps/john-ezra/oled.c | 540 ++++++++++++++---- .../splitkb/kyria/keymaps/john-ezra/readme.md | 20 + .../splitkb/kyria/keymaps/john-ezra/rules.mk | 7 + 6 files changed, 851 insertions(+), 144 deletions(-) create mode 100644 keyboards/splitkb/kyria/keymaps/john-ezra/glcdfont.c create mode 100644 keyboards/splitkb/kyria/keymaps/john-ezra/readme.md diff --git a/keyboards/splitkb/kyria/keymaps/john-ezra/config.h b/keyboards/splitkb/kyria/keymaps/john-ezra/config.h index 77f095767d..70b41675a3 100644 --- a/keyboards/splitkb/kyria/keymaps/john-ezra/config.h +++ b/keyboards/splitkb/kyria/keymaps/john-ezra/config.h @@ -16,19 +16,15 @@ #pragma once -#ifdef OLED_DRIVER_ENABLE - #define OLED_DISPLAY_128X64 -#endif +#define OLED_FONT_H "keyboards/splitkb/kyria/keymaps/john-ezra/glcdfont.c" +#define OLED_FONT_END 255 +#define OLED_TIMEOUT 30000 +#define OLED_DISPLAY_128X64 #ifdef RGBLIGHT_ENABLE - #define RGBLIGHT_EFFECT_RAINBOW_MOOD - #define RGBLIGHT_EFFECT_RAINBOW_SWIRL - #define RGBLIGHT_EFFECT_STATIC_GRADIENT - #define RGBLIGHT_EFFECT_TWINKLE - - #define RGBLIGHT_HUE_STEP 8 - #define RGBLIGHT_SAT_STEP 8 - #define RGBLIGHT_VAL_STEP 8 + #define RGBLIGHT_HUE_STEP 5 + #define RGBLIGHT_SAT_STEP 5 + #define RGBLIGHT_VAL_STEP 5 #define RGBLIGHT_LIMIT_VAL 150 #endif @@ -38,3 +34,7 @@ #define TAPPING_TERM 125 #define SPLIT_WPM_ENABLE + +#define USB_POLLING_INTERVAL_MS 1 + +#define DEBUG_MATRIX_SCAN_RATE diff --git a/keyboards/splitkb/kyria/keymaps/john-ezra/glcdfont.c b/keyboards/splitkb/kyria/keymaps/john-ezra/glcdfont.c new file mode 100644 index 0000000000..86fb5d86e3 --- /dev/null +++ b/keyboards/splitkb/kyria/keymaps/john-ezra/glcdfont.c @@ -0,0 +1,276 @@ +/* Copyright 2021 John Ezra +* +* This program is free software: you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation, either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program. If not, see . +*/ + +#include "progmem.h" + +static const unsigned char font[] PROGMEM = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00, + 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00, + 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00, + 0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00, + 0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00, + 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00, + 0x00, 0x18, 0x3C, 0x18, 0x00, 0x00, + 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00, + 0x00, 0x18, 0x24, 0x18, 0x00, 0x00, + 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00, + 0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00, + 0x26, 0x29, 0x79, 0x29, 0x26, 0x00, + 0x40, 0x7F, 0x05, 0x05, 0x07, 0x00, + 0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00, + 0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00, + 0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00, + 0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00, + 0x14, 0x22, 0x7F, 0x22, 0x14, 0x00, + 0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00, + 0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00, + 0x00, 0x66, 0x89, 0x95, 0x6A, 0x00, + 0x60, 0x60, 0x60, 0x60, 0x60, 0x00, + 0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00, + 0x08, 0x04, 0x7E, 0x04, 0x08, 0x00, + 0x10, 0x20, 0x7E, 0x20, 0x10, 0x00, + 0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00, + 0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00, + 0x1E, 0x10, 0x10, 0x10, 0x10, 0x00, + 0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00, + 0x30, 0x38, 0x3E, 0x38, 0x30, 0x00, + 0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x5F, 0x00, 0x00, 0x00, + 0x00, 0x07, 0x00, 0x07, 0x00, 0x00, + 0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00, + 0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00, + 0x23, 0x13, 0x08, 0x64, 0x62, 0x00, + 0x36, 0x49, 0x56, 0x20, 0x50, 0x00, + 0x00, 0x08, 0x07, 0x03, 0x00, 0x00, + 0x00, 0x1C, 0x22, 0x41, 0x00, 0x00, + 0x00, 0x41, 0x22, 0x1C, 0x00, 0x00, + 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00, + 0x08, 0x08, 0x3E, 0x08, 0x08, 0x00, + 0x00, 0x80, 0x70, 0x30, 0x00, 0x00, + 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, + 0x00, 0x00, 0x60, 0x60, 0x00, 0x00, + 0x20, 0x10, 0x08, 0x04, 0x02, 0x00, + 0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00, + 0x00, 0x42, 0x7F, 0x40, 0x00, 0x00, + 0x72, 0x49, 0x49, 0x49, 0x46, 0x00, + 0x21, 0x41, 0x49, 0x4D, 0x33, 0x00, + 0x18, 0x14, 0x12, 0x7F, 0x10, 0x00, + 0x27, 0x45, 0x45, 0x45, 0x39, 0x00, + 0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00, + 0x41, 0x21, 0x11, 0x09, 0x07, 0x00, + 0x36, 0x49, 0x49, 0x49, 0x36, 0x00, + 0x46, 0x49, 0x49, 0x29, 0x1E, 0x00, + 0x00, 0x00, 0x14, 0x00, 0x00, 0x00, + 0x00, 0x40, 0x34, 0x00, 0x00, 0x00, + 0x00, 0x08, 0x14, 0x22, 0x41, 0x00, + 0x14, 0x14, 0x14, 0x14, 0x14, 0x00, + 0x00, 0x41, 0x22, 0x14, 0x08, 0x00, + 0x02, 0x01, 0x59, 0x09, 0x06, 0x00, + 0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00, + 0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00, + 0x7F, 0x49, 0x49, 0x49, 0x36, 0x00, + 0x3E, 0x41, 0x41, 0x41, 0x22, 0x00, + 0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00, + 0x7F, 0x49, 0x49, 0x49, 0x41, 0x00, + 0x7F, 0x09, 0x09, 0x09, 0x01, 0x00, + 0x3E, 0x41, 0x41, 0x51, 0x73, 0x00, + 0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00, + 0x00, 0x41, 0x7F, 0x41, 0x00, 0x00, + 0x20, 0x40, 0x41, 0x3F, 0x01, 0x00, + 0x7F, 0x08, 0x14, 0x22, 0x41, 0x00, + 0x7F, 0x40, 0x40, 0x40, 0x40, 0x00, + 0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00, + 0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00, + 0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00, + 0x7F, 0x09, 0x09, 0x09, 0x06, 0x00, + 0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00, + 0x7F, 0x09, 0x19, 0x29, 0x46, 0x00, + 0x26, 0x49, 0x49, 0x49, 0x32, 0x00, + 0x03, 0x01, 0x7F, 0x01, 0x03, 0x00, + 0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00, + 0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00, + 0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00, + 0x63, 0x14, 0x08, 0x14, 0x63, 0x00, + 0x03, 0x04, 0x78, 0x04, 0x03, 0x00, + 0x61, 0x59, 0x49, 0x4D, 0x43, 0x00, + 0x00, 0x7F, 0x41, 0x41, 0x41, 0x00, + 0x02, 0x04, 0x08, 0x10, 0x20, 0x00, + 0x00, 0x41, 0x41, 0x41, 0x7F, 0x00, + 0x04, 0x02, 0x01, 0x02, 0x04, 0x00, + 0x40, 0x40, 0x40, 0x40, 0x40, 0x00, + 0x00, 0x03, 0x07, 0x08, 0x00, 0x00, + 0x20, 0x54, 0x54, 0x78, 0x40, 0x00, + 0x7F, 0x28, 0x44, 0x44, 0x38, 0x00, + 0x38, 0x44, 0x44, 0x44, 0x28, 0x00, + 0x38, 0x44, 0x44, 0x28, 0x7F, 0x00, + 0x38, 0x54, 0x54, 0x54, 0x18, 0x00, + 0x00, 0x08, 0x7E, 0x09, 0x02, 0x00, + 0x18, 0x24, 0x24, 0x1C, 0x78, 0x00, + 0x7F, 0x08, 0x04, 0x04, 0x78, 0x00, + 0x00, 0x44, 0x7D, 0x40, 0x00, 0x00, + 0x20, 0x40, 0x40, 0x3D, 0x00, 0x00, + 0x7F, 0x10, 0x28, 0x44, 0x00, 0x00, + 0x00, 0x41, 0x7F, 0x40, 0x00, 0x00, + 0x7C, 0x04, 0x78, 0x04, 0x78, 0x00, + 0x7C, 0x08, 0x04, 0x04, 0x78, 0x00, + 0x38, 0x44, 0x44, 0x44, 0x38, 0x00, + 0x7C, 0x18, 0x24, 0x24, 0x18, 0x00, + 0x18, 0x24, 0x24, 0x18, 0x7C, 0x00, + 0x7C, 0x08, 0x04, 0x04, 0x08, 0x00, + 0x48, 0x54, 0x54, 0x54, 0x24, 0x00, + 0x04, 0x04, 0x3F, 0x44, 0x24, 0x00, + 0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00, + 0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00, + 0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00, + 0x44, 0x28, 0x10, 0x28, 0x44, 0x00, + 0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00, + 0x44, 0x64, 0x54, 0x4C, 0x44, 0x00, + 0x00, 0x08, 0x36, 0x41, 0x00, 0x00, + 0x00, 0x00, 0x77, 0x00, 0x00, 0x00, + 0x00, 0x41, 0x36, 0x08, 0x00, 0x00, + 0x02, 0x01, 0x02, 0x04, 0x02, 0x00, + 0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00, + 0x00, 0xF0, 0x08, 0x24, 0x52, 0xE2, + 0x42, 0x42, 0x42, 0xE2, 0x52, 0x22, + 0x24, 0x22, 0x42, 0x82, 0x02, 0x02, + 0x22, 0x22, 0x02, 0x02, 0xFE, 0x00, + 0x00, 0xF0, 0x08, 0x04, 0x02, 0x82, + 0x42, 0x22, 0x42, 0x82, 0x02, 0x02, + 0x04, 0x82, 0x42, 0x22, 0x12, 0x22, + 0x42, 0x82, 0x02, 0x02, 0xFE, 0x00, + 0x00, 0xF0, 0x08, 0x84, 0x42, 0x42, + 0x82, 0x82, 0x42, 0x42, 0x42, 0x82, + 0x04, 0x82, 0xC2, 0xE2, 0xF2, 0xE2, + 0xC2, 0x82, 0x02, 0x02, 0xFE, 0x00, + 0x00, 0xF0, 0x08, 0x44, 0x42, 0xF2, + 0x42, 0x42, 0x42, 0xF2, 0x42, 0x42, + 0x04, 0x82, 0xE2, 0x92, 0x92, 0x92, + 0xE2, 0x82, 0x02, 0x02, 0xFE, 0x00, + 0x00, 0xF0, 0x08, 0x84, 0x82, 0x02, + 0x82, 0x02, 0x02, 0x82, 0x82, 0x02, + 0x02, 0x02, 0x82, 0x82, 0x02, 0x02, + 0xE2, 0x12, 0x12, 0xE2, 0x02, 0x62, + 0x92, 0x92, 0x22, 0x02, 0xFE, 0x00, + 0x00, 0xF0, 0x08, 0x04, 0xF2, 0x02, + 0x02, 0x02, 0xF2, 0x02, 0x82, 0x02, + 0x02, 0x02, 0x02, 0x02, 0x02, 0x22, + 0xF2, 0x02, 0x02, 0xE2, 0x12, 0x12, + 0x12, 0xE2, 0x02, 0x02, 0xFE, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x02, 0xFE, 0x00, 0x00, 0xF0, 0x08, + 0x02, 0xFE, 0x00, 0x00, 0xF0, 0xF8, + 0x00, 0x7F, 0x40, 0x44, 0x4A, 0x47, + 0x42, 0x42, 0x42, 0x47, 0x4A, 0x44, + 0x40, 0x40, 0x40, 0x40, 0x41, 0x42, + 0x44, 0x44, 0x40, 0x40, 0x7F, 0x00, + 0x00, 0x7F, 0x40, 0x40, 0x41, 0x40, + 0x40, 0x40, 0x40, 0x40, 0x41, 0x40, + 0x41, 0x41, 0x4F, 0x48, 0x48, 0x48, + 0x4F, 0x41, 0x41, 0x40, 0x7F, 0x00, + 0x00, 0x7F, 0x40, 0x41, 0x42, 0x42, + 0x42, 0x41, 0x41, 0x42, 0x42, 0x41, + 0x40, 0x40, 0x40, 0x4B, 0x4B, 0x4B, + 0x40, 0x40, 0x40, 0x40, 0x7F, 0x00, + 0x00, 0x7F, 0x40, 0x42, 0x42, 0x4F, + 0x42, 0x42, 0x42, 0x4F, 0x42, 0x42, + 0x40, 0x4F, 0x4F, 0x4F, 0x48, 0x4F, + 0x4F, 0x4F, 0x40, 0x40, 0x7F, 0x00, + 0x00, 0x7F, 0x40, 0x4F, 0x40, 0x4F, + 0x40, 0x4F, 0x44, 0x4A, 0x4A, 0x4F, + 0x48, 0x47, 0x48, 0x48, 0x45, 0x40, + 0x47, 0x48, 0x48, 0x47, 0x40, 0x44, + 0x48, 0x48, 0x47, 0x40, 0x7F, 0x00, + 0x00, 0x7F, 0x40, 0x40, 0x47, 0x48, + 0x47, 0x48, 0x47, 0x40, 0x4E, 0x40, + 0x4F, 0x41, 0x41, 0x4E, 0x40, 0x48, + 0x4F, 0x48, 0x40, 0x47, 0x48, 0x48, + 0x48, 0x47, 0x40, 0x40, 0x7F, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x40, 0x7F, 0x00, 0x00, 0x7F, 0x40, + 0x40, 0x7F, 0x00, 0x00, 0x7F, 0x7F, + 0x00, 0xF0, 0xF8, 0xDC, 0xAE, 0x1E, + 0xBE, 0xBE, 0xBE, 0x1E, 0xAE, 0xDE, + 0xDC, 0xDE, 0xBE, 0x7E, 0xFE, 0xFE, + 0xDE, 0xDE, 0xFE, 0xFE, 0xFE, 0x00, + 0x00, 0xF0, 0xF8, 0xFC, 0xFE, 0x7E, + 0xBE, 0xDE, 0xBE, 0x7E, 0xFE, 0xFE, + 0xFC, 0x7E, 0x3E, 0x1E, 0x0E, 0x1E, + 0x3E, 0x7E, 0xFE, 0xFE, 0xFE, 0x00, + 0x00, 0xF0, 0xF8, 0x7C, 0xBE, 0xBE, + 0x7E, 0x7E, 0xBE, 0xBE, 0xBE, 0x7E, + 0xFC, 0x7E, 0x3E, 0x1E, 0x0E, 0x1E, + 0x3E, 0x7E, 0xFE, 0xFE, 0xFE, 0x00, + 0x00, 0xF0, 0xF8, 0xBC, 0xBE, 0x0E, + 0xBE, 0xBE, 0xBE, 0x0E, 0xBE, 0xBE, + 0xFC, 0x7E, 0x1E, 0x6E, 0x6E, 0x6E, + 0x1E, 0x7E, 0xFE, 0xFE, 0xFE, 0x00, + 0x00, 0xF0, 0xF8, 0x7C, 0x7E, 0xFE, + 0x7E, 0xFE, 0xFE, 0x7E, 0x7E, 0xFE, + 0xFE, 0xFE, 0x7E, 0x7E, 0xFE, 0xFE, + 0x1E, 0xEE, 0xEE, 0x1E, 0xFE, 0x9E, + 0x6E, 0x6E, 0xDE, 0xFE, 0xFE, 0x00, + 0x00, 0xF0, 0xF8, 0xFC, 0x0E, 0xFE, + 0xFE, 0xFE, 0x0E, 0xFE, 0x7E, 0xFE, + 0xFE, 0xFE, 0xFE, 0xFE, 0xFE, 0xDE, + 0x0E, 0xFE, 0xFE, 0x1E, 0xEE, 0xEE, + 0xEE, 0x1E, 0xFE, 0xFE, 0xFE, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xFE, 0xFE, 0x00, 0x00, 0xF0, 0x08, + 0xFE, 0xFE, 0x00, 0x00, 0xF0, 0xF8, + 0x00, 0x7F, 0x7F, 0x7B, 0x75, 0x78, + 0x7D, 0x7D, 0x7D, 0x78, 0x75, 0x7B, + 0x7F, 0x7F, 0x7F, 0x7F, 0x7E, 0x7D, + 0x7B, 0x7B, 0x7F, 0x7F, 0x7F, 0x00, + 0x00, 0x7F, 0x7F, 0x7F, 0x7E, 0x7F, + 0x7F, 0x7F, 0x7F, 0x7F, 0x7E, 0x7F, + 0x7E, 0x7E, 0x70, 0x70, 0x70, 0x70, + 0x70, 0x7E, 0x7E, 0x7F, 0x7F, 0x00, + 0x00, 0x7F, 0x7F, 0x7E, 0x7D, 0x7D, + 0x7D, 0x7E, 0x7E, 0x7D, 0x7D, 0x7E, + 0x7F, 0x7F, 0x7F, 0x74, 0x74, 0x74, + 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x00, + 0x00, 0x7F, 0x7F, 0x7D, 0x7D, 0x70, + 0x7D, 0x7D, 0x7D, 0x70, 0x7D, 0x7D, + 0x7F, 0x70, 0x70, 0x70, 0x77, 0x70, + 0x70, 0x70, 0x7F, 0x7F, 0x7F, 0x00, + 0x00, 0x7F, 0x7F, 0x70, 0x7F, 0x70, + 0x7F, 0x70, 0x7B, 0x75, 0x75, 0x70, + 0x77, 0x78, 0x77, 0x77, 0x7A, 0x7F, + 0x78, 0x77, 0x77, 0x78, 0x7F, 0x7B, + 0x77, 0x77, 0x78, 0x7F, 0x7F, 0x00, + 0x00, 0x7F, 0x7F, 0x7F, 0x78, 0x77, + 0x78, 0x77, 0x78, 0x7F, 0x71, 0x7F, + 0x70, 0x7E, 0x7E, 0x71, 0x7F, 0x77, + 0x70, 0x77, 0x7F, 0x78, 0x77, 0x77, + 0x77, 0x78, 0x7F, 0x7F, 0x7F, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x7F, 0x7F, 0x00, 0x00, 0x7F, 0x40, + 0x7F, 0x7F, 0x00, 0x00, 0x7F, 0x7F, +}; diff --git a/keyboards/splitkb/kyria/keymaps/john-ezra/keymap.c b/keyboards/splitkb/kyria/keymaps/john-ezra/keymap.c index f42cbf1d04..6937007e5c 100644 --- a/keyboards/splitkb/kyria/keymaps/john-ezra/keymap.c +++ b/keyboards/splitkb/kyria/keymaps/john-ezra/keymap.c @@ -1,23 +1,25 @@ /* Copyright 2021 John Ezra - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ +* +* This program is free software: you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation, either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program. If not, see . +*/ #include QMK_KEYBOARD_H enum kyria_layers { _HNTS, + _GAME, + _NUMPAD, _LOWER, _RAISE, _ADJUST @@ -25,20 +27,27 @@ enum kyria_layers { enum kyria_keycodes { HNTS = SAFE_RANGE, + ESC_NUM, LOWER, RAISE, + MSS_CTL, CPY_PST, UNDO, FIND }; #define HNTS DF(_HNTS) -#define QWERTY DF(_QWERTY) +#define GAME TG(_GAME) +#define NUMPAD TG(_NUMPAD) +#define MSS_CTL MT(MOD_LCTL, C(KC_UP)) #define BSP_CMD MT(MOD_LGUI, KC_BSPC) +#define TAB_CMD MT(MOD_LGUI, KC_TAB) #define SFT_ENT MT(MOD_LSFT, KC_ENT) +#define ALT_ESC MT(MOD_LALT, KC_ESC) +#define ALT_TAB A(KC_TAB) #define UNDO G(KC_Z) #define FIND G(KC_F) -#define MSS_CTL C(KC_UP) + const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { @@ -52,15 +61,57 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |-------+-------+-------+-------+-------+-------+---------------. ,---------------+-------+-------+-------+-------+-------+-------| * | Undo | K | V | M | F | G | Esc |MssnCtl| |MssnCtl| Esc | J | ; : | , < | . > | / ? | ' " | * `-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-----------------------' - * | Ctrl | Alt | Lower | Space | BSPC | | Tab | Shift | Raise | Del | Caps | + * | Numpad| Enter | Lower | Space | BSPC | | Tab | Shift | Raise | Del | Caps | * `---------------------------------------' `---------------------------------------' */ [_HNTS] = LAYOUT( FIND, KC_Z, KC_R, KC_L, KC_D, KC_W, KC_Y, KC_P, KC_U, KC_X, KC_Q, KC_BSLS, CPY_PST, KC_H, KC_N, KC_T, KC_S, KC_C, KC_B, KC_I, KC_E, KC_O, KC_A, KC_GRV, - UNDO, KC_K, KC_V, KC_M, KC_F, KC_G, KC_ESC, MSS_CTL, MSS_CTL, KC_ESC, KC_J, KC_SCLN, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT, - KC_LCTL, KC_LALT, LOWER, KC_SPC, BSP_CMD, KC_TAB, SFT_ENT, RAISE, KC_DEL, KC_CAPS + UNDO, KC_K, KC_V, KC_M, KC_F, KC_G, ALT_ESC, MSS_CTL, MSS_CTL, ALT_ESC, KC_J, KC_SCLN, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT, + NUMPAD, SFT_ENT, LOWER, KC_SPC, BSP_CMD, TAB_CMD, SFT_ENT, RAISE, KC_DEL, KC_CAPS +), + +/* + * Game: Gaming Layer + * + * ,-----------------------------------------------. ,-----------------------------------------------. + * | 0 | Z | R | L | D | W | | Y | P | U | X | Q | Esc | + * |-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------| + * | 1 | H | N | T | S | C | | B | I | E | O | A | Enter | + * |-------+-------+-------+-------+-------+-------+---------------. ,---------------+-------+-------+-------+-------+-------+-------| + * | 2 | K | V | M | F | G | 8 | 9 | |Default| Esc | J | ; : | , < | . > | / ? |Alt+Tab| + * `-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-----------------------' + * | 3 | 4 | 5 | 6 | 7 | | Tab | Shift | Raise | Del | Caps | + * `---------------------------------------' `---------------------------------------' + */ + +[_GAME] = LAYOUT( + KC_0, KC_Z, KC_R, KC_L, KC_D, KC_W, KC_Y, KC_P, KC_U, KC_X, KC_Q, KC_ESC, + KC_1, KC_H, KC_N, KC_T, KC_S, KC_C, KC_B, KC_I, KC_E, KC_O, KC_A, KC_ENT, + KC_2, KC_K, KC_V, KC_M, KC_F, KC_G, KC_8, KC_9, GAME, ALT_ESC, KC_J, KC_SCLN, KC_COMM, KC_DOT, KC_SLSH, ALT_TAB, + KC_3, KC_4, KC_5, KC_6, KC_7, TAB_CMD, SFT_ENT, RAISE, KC_DEL, KC_CAPS +), + +/* + * Numpad + * + * ,-----------------------------------------------. ,-----------------------------------------------. + * | * | + | 7 | 8 | 9 | 0 | | | | | | | | + * |-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------| + * | / | - | 4 | 5 | 6 | ( | | | Left | Up | Down | Right | | + * |-------+-------+-------+-------+-------+-------+---------------. ,---------------+-------+-------+-------+-------+-------+-------| + * | = | . | 1 | 2 | 3 | ) | | | | | | | | | | | | + * `-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-----------------------' + * | | | | | | | | | | | | + * `---------------------------------------' `---------------------------------------' + */ + +[_NUMPAD] = LAYOUT( + KC_ASTR, KC_PLUS, KC_7, KC_8, KC_9, KC_0, _______, _______, _______, _______, _______, _______, + KC_SLSH, KC_MINS, KC_4, KC_5, KC_6, KC_LPRN, _______, KC_LEFT, KC_UP, KC_DOWN, KC_RGHT, _______, + KC_EQL, KC_DOT, KC_1, KC_2, KC_3, KC_RPRN, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), /* @@ -105,26 +156,27 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), - /* - * Adjust: Function Keys & RGB - * - * ,-----------------------------------------------. ,-----------------------------------------------. - * | Reset | | | | | | | | NKRO |CG SWAP| | | HNTS | - * |-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------| - * | | TOG | SAI | HUI | VAI | MOD | | | | | | | | - * |-------+-------+-------+-------+-------+-------+---------------. ,---------------+-------+-------+-------+-------+-------+-------| - * | | | SAD | HUD | VAD | RMOD | | | | | | | |Bright+|Bright-| | | - * `-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-----------------------' - * | | | | | | | | | | | | - * `---------------------------------------' `---------------------------------------' - */ +/* + * Adjust: Function Keys & RGB + * + * ,-----------------------------------------------. ,-----------------------------------------------. + * | Reset | | | | | | | | NKRO |CG SWAP| | | HNTS | + * |-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------| + * | | TOG | SAI | HUI | VAI | MOD | | |Bright+|Bright-| | | | + * |-------+-------+-------+-------+-------+-------+---------------. ,---------------+-------+-------+-------+-------+-------+-------| + * | | | SAD | HUD | VAD | RMOD | | | | | | | | | | | | + * `-------+-------+-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-----------------------' + * | | | | | | | | | | | | + * `---------------------------------------' `---------------------------------------' + */ [_ADJUST] = LAYOUT( - RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, HNTS, - _______, RGB_TOG, RGB_SAI, RGB_HUI, RGB_VAI, RGB_MOD, CG_TOGG, NK_TOGG, KC_BRID, KC_BRIU, _______, _______, - _______, _______, RGB_SAD, RGB_HUD, RGB_VAD,RGB_RMOD,_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + RESET, _______, _______, _______, _______, _______, _______, NK_TOGG, CG_TOGG, _______, GAME, HNTS, + _______, RGB_TOG, RGB_SAI, RGB_HUI, RGB_VAI, RGB_MOD, _______, KC_BRIU, KC_BRID, _______, _______, _______, + _______, _______, RGB_SAD, RGB_HUD, RGB_VAD,RGB_RMOD,_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), + }; bool process_record_user(uint16_t keycode, keyrecord_t *record) { @@ -167,6 +219,12 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } } break; + case MSS_CTL: + if (record->event.pressed && record->tap.count) { + tap_code16(C(KC_UP)); + return false; + } + break; case UNDO: // Tap to Undo, Tap with GUI to Redo if (get_mods() & MOD_MASK_GUI) { if (record->event.pressed) { diff --git a/keyboards/splitkb/kyria/keymaps/john-ezra/oled.c b/keyboards/splitkb/kyria/keymaps/john-ezra/oled.c index e027839124..fe9c96d556 100644 --- a/keyboards/splitkb/kyria/keymaps/john-ezra/oled.c +++ b/keyboards/splitkb/kyria/keymaps/john-ezra/oled.c @@ -1,18 +1,18 @@ /* Copyright 2021 John Ezra - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ +* +* This program is free software: you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation, either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program. If not, see . +*/ //Sets up what the OLED screens display. @@ -26,7 +26,7 @@ int vert_count = 0; //============= USER CONFIG PARAMS =============== float max_wpm = 150.0f; //WPM value at the top of the graph window -int graph_refresh_interval = 80; //in milliseconds +int graph_refresh_interval = 100; //in milliseconds int graph_area_fill_interval = 3; //determines how dense the horizontal lines under the graph line are; lower = more dense int vert_interval = 3; //determines frequency of vertical lines under the graph line bool vert_line = false; //determines whether to draw vertical lines @@ -34,110 +34,456 @@ int graph_line_thickness = 2; //determines thickness of graph line in pixels //============= END USER PARAMS =============== #ifdef OLED_ENABLE -oled_rotation_t oled_init_user(oled_rotation_t rotation) { - return OLED_ROTATION_180; + oled_rotation_t oled_init_user(oled_rotation_t rotation) { + return OLED_ROTATION_180; } static void render_qmk_logo(void) { - static const char PROGMEM qmk_logo[] = { - 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, - 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, - 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,0}; + static const char PROGMEM qmk_logo[] = { + 0x00, 0x00, 0x00, 0x00, 0xc0, 0xe0, 0xf0, 0x70, 0x70, 0x7e, 0xf0, 0xf0, 0xfe, 0xf0, 0x70, 0x7e, + 0x70, 0xf0, 0xfe, 0xf0, 0xf0, 0x7e, 0x70, 0x70, 0xf0, 0xe0, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x92, 0x92, 0x92, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, + 0x00, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0x92, 0x92, 0x92, 0x00, 0x00, + 0xf8, 0xfc, 0x0e, 0x06, 0x06, 0x06, 0x0e, 0xfc, 0xf8, 0x00, 0xfe, 0xfe, 0x1c, 0x38, 0x70, 0xe0, + 0x70, 0x38, 0x1c, 0xfe, 0xfe, 0x00, 0xfe, 0xfe, 0xe0, 0xf0, 0xb8, 0x1c, 0x0e, 0x06, 0x00, 0x00, + 0x00, 0xfe, 0xfe, 0xc6, 0xc6, 0xc6, 0x06, 0x00, 0xe6, 0xe6, 0x00, 0xf0, 0xf0, 0x60, 0x30, 0x30, + 0x60, 0x00, 0xf0, 0xf0, 0x30, 0x30, 0xe0, 0xc0, 0x30, 0x30, 0x30, 0xe0, 0xc0, 0x00, 0xf0, 0xf0, + 0x00, 0xc0, 0xe0, 0x70, 0xe0, 0xc0, 0x00, 0xf0, 0xf0, 0x00, 0x20, 0xb0, 0x90, 0xb0, 0xf0, 0xe0, + 0x00, 0xf0, 0xf0, 0x60, 0x30, 0x30, 0x60, 0x00, 0xc0, 0xe0, 0x30, 0x30, 0x30, 0xe0, 0xc0, 0x00, + 0x00, 0x24, 0x24, 0x24, 0xff, 0xff, 0xff, 0xfe, 0xfc, 0xf8, 0xf0, 0xf1, 0xe3, 0xe3, 0x00, 0x00, + 0x00, 0xe3, 0xe3, 0xf1, 0xf0, 0xf8, 0xfc, 0xfe, 0xff, 0xff, 0xff, 0x24, 0x24, 0x24, 0x00, 0x00, + 0x03, 0x07, 0x0e, 0x0c, 0x0c, 0x1c, 0x1e, 0x17, 0x13, 0x00, 0x0f, 0x0f, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x0f, 0x0f, 0x00, 0x0f, 0x0f, 0x00, 0x01, 0x03, 0x07, 0x0e, 0x0c, 0x00, 0x00, + 0x00, 0x0f, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0f, 0x0f, 0x00, 0x0f, 0x0f, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x0f, 0x0f, 0x00, 0x00, 0x0f, 0x0f, 0x00, 0x00, 0x00, 0x0f, 0x0f, 0x00, 0x01, 0x0f, + 0x0f, 0x07, 0x01, 0x00, 0x01, 0x07, 0x0f, 0x0f, 0x01, 0x00, 0x07, 0x0f, 0x0c, 0x04, 0x0f, 0x0f, + 0x00, 0x0f, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x07, 0x0d, 0x09, 0x09, 0x0d, 0x04, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x01, 0x03, 0x07, 0x07, 0x07, 0x3f, 0x07, 0x07, 0x3f, 0x07, 0x07, 0x3f, + 0x07, 0x07, 0x3f, 0x07, 0x07, 0x3f, 0x07, 0x07, 0x07, 0x03, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 + }; + oled_write_raw_P(qmk_logo, sizeof(qmk_logo)); +} + +// Loop to create line by line rendering for Horizontal display +// Input is oled_render_image(how many rows tall, how many pixels wide, what to render, X pos, Y pos, Frame offset) +void oled_render_image(int lines, int px, const char render_line[][px], int X_pos, int Y_pos, int frame) { + for (uint8_t i = 0; i < lines; i++){ + oled_set_cursor(X_pos, Y_pos + i); + oled_write_raw_P(render_line[i + frame], px); + } +} + +static void render_layers(void) { + static const char PROGMEM layer_background_r1[1][38] = { + {0x00, 0x80, 0x40, 0x20, 0x10, 0x08, 0x04, 0x02, 0x02, 0x02, 0x02, 0x02, 0x82, 0x82, 0x82, 0x42, + 0x42, 0x42, 0x22, 0x22, 0x22, 0x42, 0x42, 0x42, 0x82, 0x82, 0x82, 0x02, 0x02, 0x02, 0x02, 0x02, + 0x02, 0x02, 0x02, 0x02, 0x02, 0xfe} + }; + static const char PROGMEM layer_background_r2[1][38] = { + {0x00, 0xff, 0x00, 0x44, 0x44, 0x44, 0xaa, 0xaa, 0xaa, 0x11, 0x11, 0x11, 0x20, 0x20, 0x20, 0x40, + 0x40, 0x40, 0x80, 0x80, 0x80, 0x40, 0x40, 0x40, 0x20, 0x20, 0x20, 0x11, 0x11, 0x11, 0xaa, 0xaa, + 0xaa, 0x44, 0x44, 0x44, 0x00, 0xff} + }; + static const char PROGMEM layer_background_r3[1][38] = { + {0x00, 0xff, 0x00, 0x44, 0x44, 0x44, 0xaa, 0xaa, 0xaa, 0x11, 0x11, 0x11, 0x22, 0x22, 0x22, 0x44, + 0x44, 0x44, 0x88, 0x88, 0x88, 0x44, 0x44, 0x44, 0x22, 0x22, 0x22, 0x11, 0x11, 0x11, 0xaa, 0xaa, + 0xaa, 0x44, 0x44, 0x44, 0x00, 0xff} + }; + static const char PROGMEM layer_background_r4[1][38] = { + {0x00, 0x7f, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x41, 0x41, 0x41, 0x42, 0x42, 0x42, 0x44, + 0x44, 0x44, 0x48, 0x48, 0x48, 0x44, 0x44, 0x44, 0x42, 0x42, 0x42, 0x41, 0x41, 0x41, 0x40, 0x40, + 0x40, 0x40, 0x40, 0x40, 0x40, 0x7f} + }; + static const char PROGMEM base[1][38] = { + {0x00, 0xff, 0x00, 0x44, 0x44, 0x44, 0xae, 0xae, 0xae, 0x1f, 0x1f, 0x1f, 0x3e, 0x3e, 0x3e, 0x7c, + 0x7c, 0x7c, 0xf8, 0xf8, 0xf8, 0x7c, 0x7c, 0x7c, 0x3e, 0x3e, 0x3e, 0x1f, 0x1f, 0x1f, 0xae, 0xae, + 0xae, 0x44, 0x44, 0x44, 0x00, 0xff} + }; + static const char PROGMEM lower[2][38] = { + {0x00, 0xff, 0x00, 0x44, 0x44, 0x44, 0xea, 0xea, 0xea, 0xf1, 0xf1, 0xf1, 0xe2, 0xe2, 0xe2, 0xc4, + 0xc4, 0xc4, 0x88, 0x88, 0x88, 0xc4, 0xc4, 0xc4, 0xe2, 0xe2, 0xe2, 0xf1, 0xf1, 0xf1, 0xea, 0xea, + 0xea, 0x44, 0x44, 0x44, 0x00, 0xff}, + {0x00, 0x7f, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x41, 0x41, 0x41, 0x43, 0x43, 0x43, 0x47, + 0x47, 0x47, 0x4f, 0x4f, 0x4f, 0x47, 0x47, 0x47, 0x43, 0x43, 0x43, 0x41, 0x41, 0x41, 0x40, 0x40, + 0x40, 0x40, 0x40, 0x40, 0x40, 0x7f} + }; + static const char PROGMEM raise[][38] = { + {0x00, 0xff, 0x00, 0x44, 0x44, 0x44, 0xea, 0xea, 0xea, 0xf1, 0xf1, 0xf1, 0xe0, 0xe0, 0xe0, 0xc0, + 0xc0, 0xc0, 0x80, 0x80, 0x80, 0xc0, 0xc0, 0xc0, 0xe0, 0xe0, 0xe0, 0xf1, 0xf1, 0xf1, 0xea, 0xea, + 0xea, 0x44, 0x44, 0x44, 0x00, 0xff}, + {0x00, 0xff, 0x00, 0x44, 0x44, 0x44, 0xaa, 0xaa, 0xaa, 0x11, 0x11, 0x11, 0x23, 0x23, 0x23, 0x47, + 0x47, 0x47, 0x8f, 0x8f, 0x8f, 0x47, 0x47, 0x47, 0x23, 0x23, 0x23, 0x11, 0x11, 0x11, 0xaa, 0xaa, + 0xaa, 0x44, 0x44, 0x44, 0x00, 0xff} + }; + static const char PROGMEM adjust[][38] = { + {0x00, 0x80, 0x40, 0x20, 0x10, 0x08, 0x04, 0x02, 0x02, 0x02, 0x02, 0x02, 0x82, 0x82, 0x82, 0xc2, + 0xc2, 0xc2, 0xe2, 0xe2, 0xe2, 0xc2, 0xc2, 0xc2, 0x82, 0x82, 0x82, 0x02, 0x02, 0x02, 0x02, 0x02, + 0x02, 0x02, 0x02, 0x02, 0x02, 0xfe}, + {0x00, 0xff, 0x00, 0x44, 0x44, 0x44, 0xae, 0xae, 0xae, 0x1f, 0x1f, 0x1f, 0x3f, 0x3f, 0x3f, 0x7f, + 0x7f, 0x7f, 0xff, 0xff, 0xff, 0x7f, 0x7f, 0x7f, 0x3f, 0x3f, 0x3f, 0x1f, 0x1f, 0x1f, 0xae, 0xae, + 0xae, 0x44, 0x44, 0x44, 0x00, 0xff} + }; + static const char PROGMEM custom[][38] = { + {0x00, 0x80, 0x40, 0x20, 0x10, 0x08, 0x04, 0x02, 0x02, 0x02, 0x02, 0x02, 0x82, 0x82, 0x82, 0x42, + 0xc2, 0x42, 0xa2, 0x62, 0xa2, 0x42, 0xc2, 0x42, 0x82, 0x82, 0x82, 0x02, 0x02, 0x02, 0x02, 0x02, + 0x02, 0x02, 0x02, 0x02, 0x02, 0xfe}, + {0x00, 0xff, 0x00, 0x44, 0x44, 0x44, 0xaa, 0xee, 0xaa, 0x55, 0xbb, 0x55, 0xaa, 0x75, 0xaa, 0x55, + 0xea, 0x55, 0xaa, 0xd5, 0xaa, 0x55, 0xea, 0x55, 0xaa, 0x75, 0xaa, 0x55, 0xbb, 0x55, 0xaa, 0xee, + 0xaa, 0x44, 0x44, 0x44, 0x00, 0xff}, + {0x00, 0xff, 0x00, 0x44, 0x44, 0x44, 0xaa, 0xee, 0xaa, 0x55, 0xbb, 0x55, 0xaa, 0x77, 0xaa, 0x55, + 0xee, 0x55, 0xaa, 0xdd, 0xaa, 0x55, 0xee, 0x55, 0xaa, 0x77, 0xaa, 0x55, 0xbb, 0x55, 0xaa, 0xee, + 0xaa, 0x44, 0x44, 0x44, 0x00, 0xff}, + {0x00, 0x7f, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x41, 0x41, 0x41, 0x42, 0x43, 0x42, 0x45, + 0x46, 0x45, 0x4a, 0x4d, 0x4a, 0x45, 0x46, 0x45, 0x42, 0x43, 0x42, 0x41, 0x41, 0x41, 0x40, 0x40, + 0x40, 0x40, 0x40, 0x40, 0x40, 0x7f} + }; - oled_write_P(qmk_logo, false); + switch (get_highest_layer(layer_state)) { + case 0: + oled_render_image(1, 38, layer_background_r1, 15, 4, 0); + oled_render_image(1, 38, layer_background_r2, 15, 5, 0); + oled_render_image(1, 38, base, 15, 6, 0); + oled_render_image(1, 38, layer_background_r4, 15, 7, 0); + break; + case 3: + oled_render_image(2, 38, lower, 15, 6, 0); + break; + case 4: + oled_render_image(1, 38, layer_background_r1, 15, 4, 0); + oled_render_image(2, 38, raise, 15, 5, 0); + oled_render_image(1, 38, layer_background_r4, 15, 7, 0); + break; + case 5: + oled_render_image(2, 38, adjust, 15, 4, 0); + oled_render_image(1, 38, layer_background_r3, 15, 6, 0); + oled_render_image(1, 38, layer_background_r4, 15, 7, 0); + break; + default: + oled_render_image(4, 38, custom, 15, 4, 0); + break; + } +} + +void render_mod_state(uint8_t modifiers) { + static const char PROGMEM gui_off [][3]= {{0x80, 0x81, 0}, {0xa0, 0xa1, 0}}; + static const char PROGMEM gui_on [][3]= {{0xc0, 0xc1, 0}, {0xe0, 0xe1, 0}}; + static const char PROGMEM alt_off [][3]= {{0x82, 0x83, 0}, {0xa2, 0xa3, 0}}; + static const char PROGMEM alt_on [][3]= {{0xc2, 0xc3, 0}, {0xe2, 0xe3, 0}}; + static const char PROGMEM ctrl_off [][3]= {{0x84, 0x85, 0}, {0xa4, 0xa5, 0}}; + static const char PROGMEM ctrl_on [][3]= {{0xc4, 0xc5, 0}, {0xe4, 0xe5, 0}}; + static const char PROGMEM shift_off [][3]= {{0x86, 0x87, 0}, {0xa6, 0xa7, 0}}; + static const char PROGMEM shift_on [][3]= {{0xc6, 0xc7, 0}, {0xe6, 0xe7, 0}}; + + // fillers between the modifier icons bleed into the icon frames + + static const char PROGMEM off_off [][2]= {{0x9e, 0}, {0xbe, 0}}; + static const char PROGMEM on_on [][2]= {{0xdf, 0}, {0xff, 0}}; + static const char PROGMEM on_off [][2]= {{0xde, 0}, {0xfe, 0}}; + static const char PROGMEM off_on [][2]= {{0x9f, 0}, {0xbf, 0}}; + + // render icons + + if(modifiers & MOD_MASK_GUI) { + oled_set_cursor(0, 4); + oled_write_P(gui_on[0], false); + oled_set_cursor(0, 5); + oled_write_P(gui_on[1], false); + } else { + oled_set_cursor(0, 4); + oled_write_P(gui_off[0], false); + oled_set_cursor(0, 5); + oled_write_P(gui_off[1], false); + } + if(modifiers & MOD_MASK_ALT) { + oled_set_cursor(3, 4); + oled_write_P(alt_on[0], false); + oled_set_cursor(3, 5); + oled_write_P(alt_on[1], false); + } else { + oled_set_cursor(3, 4); + oled_write_P(alt_off[0], false); + oled_set_cursor(3, 5); + oled_write_P(alt_off[1], false); + } + if(modifiers & MOD_MASK_CTRL) { + oled_set_cursor(0, 6); + oled_write_P(ctrl_on[0], false); + oled_set_cursor(0, 7); + oled_write_P(ctrl_on[1], false); + } else { + oled_set_cursor(0, 6); + oled_write_P(ctrl_off[0], false); + oled_set_cursor(0, 7); + oled_write_P(ctrl_off[1], false); + } + if(modifiers & MOD_MASK_SHIFT) { + oled_set_cursor(3, 6); + oled_write_P(shift_on[0], false); + oled_set_cursor(3, 7); + oled_write_P(shift_on[1], false); + } else { + oled_set_cursor(3, 6); + oled_write_P(shift_off[0], false); + oled_set_cursor(3, 7); + oled_write_P(shift_off[1], false); + } + + // render fillers + + if ((modifiers & MOD_MASK_GUI) && (modifiers & MOD_MASK_ALT)) { + oled_set_cursor(2, 4); + oled_write_P(on_on[0], false); + oled_set_cursor(2, 5); + oled_write_P(on_on[1], false); + } else if(modifiers & MOD_MASK_GUI) { + oled_set_cursor(2, 4); + oled_write_P(on_off[0], false); + oled_set_cursor(2, 5); + oled_write_P(on_off[1], false); + } else if(modifiers & MOD_MASK_ALT) { + oled_set_cursor(2, 4); + oled_write_P(off_on[0], false); + oled_set_cursor(2, 5); + oled_write_P(off_on[1], false); + } else { + oled_set_cursor(2, 4); + oled_write_P(off_off[0], false); + oled_set_cursor(2, 5); + oled_write_P(off_off[1], false); + } + + if ((modifiers & MOD_MASK_CTRL) && (modifiers & MOD_MASK_SHIFT)) { + oled_set_cursor(2, 6); + oled_write_P(on_on[0], false); + oled_set_cursor(2, 7); + oled_write_P(on_on[1], false); + } else if(modifiers & MOD_MASK_CTRL) { + oled_set_cursor(2, 6); + oled_write_P(on_off[0], false); + oled_set_cursor(2, 7); + oled_write_P(on_off[1], false); + } else if(modifiers & MOD_MASK_SHIFT) { + oled_set_cursor(2, 6); + oled_write_P(off_on[0], false); + oled_set_cursor(2, 7); + oled_write_P(off_on[1], false); + } else { + oled_set_cursor(2, 6); + oled_write_P(off_off[0], false); + oled_set_cursor(2, 7); + oled_write_P(off_off[1], false); + } } void render_bootmagic_status(void) { - oled_write_P((keymap_config.swap_lctl_lgui) ? PSTR("OS: Windows\n\n") : PSTR("OS: MacOS\n\n"), false); - oled_write_P((keymap_config.nkro) ? PSTR("NKRO ") : PSTR(" "), false); + static const char PROGMEM nkro_off [][3]= {{0x88, 0x89, 0}, {0xa8, 0xa9, 0}}; + static const char PROGMEM nkro_on [][3]= {{0xc8, 0xc9, 0}, {0xe8, 0xe9, 0}}; + static const char PROGMEM mac_os_off [][6]= {{0x90, 0x91, 0x92, 0x93, 0x94, 0}, {0xb0, 0xb1, 0xb2, 0xb3, 0xb4, 0}}; + static const char PROGMEM mac_os_on [][6]= {{0xd0, 0xd1, 0xd2, 0xd3, 0xd4, 0}, {0xf0, 0xf1, 0xf2, 0xf3, 0xf4, 0}}; + static const char PROGMEM windows_off [][6]= {{0x95, 0x96, 0x97, 0x98, 0x99, 0}, {0xb5, 0xb6, 0xb7, 0xb8, 0xb9, 0}}; + static const char PROGMEM windows_on [][6]= {{0xd5, 0xd6, 0xd7, 0xd8, 0xd9, 0}, {0xf5, 0xf6, 0xf7, 0xf8, 0xf9, 0}}; + + if (keymap_config.nkro) { + oled_set_cursor(5, 4); + oled_write_P(nkro_on[0], false); + oled_set_cursor(5, 5); + oled_write_P(nkro_on[1], false); + } else { + oled_set_cursor(5, 4); + oled_write_P(nkro_off[0], false); + oled_set_cursor(5, 5); + oled_write_P(nkro_off[1], false); + } + if (keymap_config.swap_lctl_lgui) { + oled_set_cursor(10, 6); + oled_write_P(windows_on[0], false); + oled_set_cursor(10, 7); + oled_write_P(windows_on[1], false); + oled_set_cursor(10, 4); + oled_write_P(mac_os_off[0], false); + oled_set_cursor(10, 5); + oled_write_P(mac_os_off[1], false); + } else { + oled_set_cursor(10, 4); + oled_write_P(mac_os_on[0], false); + oled_set_cursor(10, 5); + oled_write_P(mac_os_on[1], false); + oled_set_cursor(10, 6); + oled_write_P(windows_off[0], false); + oled_set_cursor(10, 7); + oled_write_P(windows_off[1], false); + } +} + +void render_lock_status(void) { + static const char PROGMEM caps_off [][3]= {{0x8a, 0x8b, 0}, {0xaa, 0xab, 0}}; + static const char PROGMEM caps_on [][3]= {{0xca, 0xcb, 0}, {0xea, 0xeb, 0}}; + static const char PROGMEM num_off [][3]= {{0x8c, 0x8d, 0}, {0xac, 0xad, 0}}; + static const char PROGMEM num_on [][3]= {{0xcc, 0xcd, 0}, {0xec, 0xed, 0}}; + static const char PROGMEM scrl_off [][3]= {{0x8e, 0x8f, 0}, {0xae, 0xaf, 0}}; + static const char PROGMEM scrl_on [][3]= {{0xce, 0xcf, 0}, {0xee, 0xef, 0}}; + + static const char PROGMEM off_off [][2]= {{0x9e, 0}, {0xbe, 0}}; + static const char PROGMEM on_on [][2]= {{0xdf, 0}, {0xff, 0}}; + static const char PROGMEM on_off [][2]= {{0xde, 0}, {0xfe, 0}}; + static const char PROGMEM off_on [][2]= {{0x9f, 0}, {0xbf, 0}}; + + led_t led_usb_state = host_keyboard_led_state(); + if (led_usb_state.caps_lock) { + oled_set_cursor(8, 4); + oled_write_P(caps_on[0], false); + oled_set_cursor(8, 5); + oled_write_P(caps_on[1], false); + } else { + oled_set_cursor(8, 4); + oled_write_P(caps_off[0], false); + oled_set_cursor(8, 5); + oled_write_P(caps_off[1], false); + } + if (led_usb_state.num_lock) { + oled_set_cursor(5, 6); + oled_write_P(num_on[0], false); + oled_set_cursor(5, 7); + oled_write_P(num_on[1], false); + } else { + oled_set_cursor(5, 6); + oled_write_P(num_off[0], false); + oled_set_cursor(5, 7); + oled_write_P(num_off[1], false); + } + if (led_usb_state.scroll_lock) { + oled_set_cursor(8, 6); + oled_write_P(scrl_on[0], false); + oled_set_cursor(8, 7); + oled_write_P(scrl_on[1], false); + } else { + oled_set_cursor(8, 6); + oled_write_P(scrl_off[0], false); + oled_set_cursor(8, 7); + oled_write_P(scrl_off[1], false); + } + + // render fillers + + if ((led_usb_state.caps_lock) && (keymap_config.nkro)) { + oled_set_cursor(7, 4); + oled_write_P(on_on[0], false); + oled_set_cursor(7, 5); + oled_write_P(on_on[1], false); + } else if(keymap_config.nkro) { + oled_set_cursor(7, 4); + oled_write_P(on_off[0], false); + oled_set_cursor(7, 5); + oled_write_P(on_off[1], false); + } else if(led_usb_state.caps_lock) { + oled_set_cursor(7, 4); + oled_write_P(off_on[0], false); + oled_set_cursor(7, 5); + oled_write_P(off_on[1], false); + } else { + oled_set_cursor(7, 4); + oled_write_P(off_off[0], false); + oled_set_cursor(7, 5); + oled_write_P(off_off[1], false); + } + if ((led_usb_state.num_lock) && (led_usb_state.scroll_lock)) { + oled_set_cursor(7, 6); + oled_write_P(on_on[0], false); + oled_set_cursor(7, 7); + oled_write_P(on_on[1], false); + } else if(led_usb_state.num_lock) { + oled_set_cursor(7, 6); + oled_write_P(on_off[0], false); + oled_set_cursor(7, 7); + oled_write_P(on_off[1], false); + } else if(led_usb_state.scroll_lock) { + oled_set_cursor(7, 6); + oled_write_P(off_on[0], false); + oled_set_cursor(7, 7); + oled_write_P(off_on[1], false); + } else { + oled_set_cursor(7, 6); + oled_write_P(off_off[0], false); + oled_set_cursor(7, 7); + oled_write_P(off_off[1], false); + } } -void render_wpm(void) { - //get current WPM value - currwpm = get_current_wpm(); - //check if it's been long enough before refreshing graph - if(timer_elapsed(timer) > graph_refresh_interval){ - // main calculation to plot graph line - x = 64 - ((currwpm / max_wpm) * 64); - //first draw actual value line - for(int i = 0; i <= graph_line_thickness - 1; i++){ - oled_write_pixel(1, x + i, true); + + +void render_wpm_graph(void) { + currwpm = get_current_wpm(); //get current WPM value + if(timer_elapsed(timer) > graph_refresh_interval){ //check if it's been long enough before refreshing graph + x = 63 - ((currwpm / max_wpm) * 63); // main calculation to plot graph line + for(int i = 0; i <= graph_line_thickness - 1; i++){ //first draw actual value line + oled_write_pixel(1, x + i, true); } - //then fill in area below the value line - if(vert_line){ - if(vert_count == vert_interval){ - vert_count = 0; - while(x <= 64){ - oled_write_pixel(1, x, true); - x++; - } - } else { - for(int i = 64; i > x; i--){ - if(i % graph_area_fill_interval == 0){ - oled_write_pixel(1, i, true); - } + if(vert_line){ //then fill in area below the value line + if(vert_count == vert_interval){ + vert_count = 0; + while(x <= 63){ + oled_write_pixel(1, x, true); + x++; } - vert_count++; - } } else { - for(int i = 64; i > x; i--){ + for(int i = 63; i > x; i--){ if(i % graph_area_fill_interval == 0){ oled_write_pixel(1, i, true); } } + vert_count++; + } + } else { + for(int i = 63; i > x; i--){ + if(i % graph_area_fill_interval == 0){ + oled_write_pixel(1, i, true); + } } - //then move the entire graph one pixel to the right - oled_pan(false); - //refresh the timer for the next iteration - timer = timer_read(); } - //format current WPM value into a printable string - char buf[4]; - oled_set_cursor(14, 0); - oled_write("WPM:", false); - buf[0] = currwpm >= 100 ? ((currwpm/100) + '0') : ' '; - buf[1] = currwpm >= 10 ? (((currwpm/10) % 10) + '0') : ' '; - buf[2] = (currwpm % 10) + '0'; - buf[3] = 0; - oled_write(buf, false); + oled_pan(false); //then move the entire graph one pixel to the right + timer = timer_read(); //refresh the timer for the next iteration + } + char buf[4]; //format current WPM value into a printable string + oled_set_cursor(14, 0); + oled_write("WPM:", false); + buf[0] = currwpm >= 100 ? ((currwpm/100) + '0') : ' '; + buf[1] = currwpm >= 10 ? (((currwpm/10) % 10) + '0') : ' '; + buf[2] = (currwpm % 10) + '0'; + buf[3] = 0; + oled_write(buf, false); } -static void render_status(void) { - // QMK Logo and version information - render_qmk_logo(); - oled_write_P(PSTR("Kyria: Rev1.0\n"), false); - - // Host Keyboard Layer Status - oled_write_P(PSTR("Layer: "), false); - switch (get_highest_layer(layer_state)) { - case 0: - oled_write_P(PSTR("Default\n"), false); - break; - case 1: - oled_write_P(PSTR("Lower\n"), false); - break; - case 2: - oled_write_P(PSTR("Raise\n"), false); - break; - case 3: - oled_write_P(PSTR("Adjust\n"), false); - break; - default: - oled_write_P(PSTR("Undefined\n"), false); - } - - render_bootmagic_status(); - -// Host Keyboard LED Status - led_t led_state = host_keyboard_led_state(); - oled_write_P(led_state.caps_lock ? PSTR("CAPLCK ") : PSTR(" "), false); +void render_status_main(void) { + render_qmk_logo(); + render_layers(); + render_mod_state(get_mods()); + render_bootmagic_status(); + render_lock_status(); + +} + +void render_status_secondary(void) { + render_wpm_graph(); } void oled_task_user(void) { - if (is_keyboard_master()) { - render_status(); - } else { - render_wpm(); - } + if (is_keyboard_master()) { + render_status_main(); // Renders the current keyboard state (layer, lock, caps, scroll, etc) + } else { + render_status_secondary(); + } } + #endif diff --git a/keyboards/splitkb/kyria/keymaps/john-ezra/readme.md b/keyboards/splitkb/kyria/keymaps/john-ezra/readme.md new file mode 100644 index 0000000000..8a3280614b --- /dev/null +++ b/keyboards/splitkb/kyria/keymaps/john-ezra/readme.md @@ -0,0 +1,20 @@ +### This Keymap uses the nanoBoot bootloader to maximize available firmware space. + +As is, the firmware will be too large if using the standard bootloader. Removing `DEBOUNCE_TYPE = sym_eager_pk` from the `rules.mk` should get the size under the limit. + +If nanoBoot is not going to be used, delete or comment out the following from your `rules.mk`: +```make +BOOTLOADER = hid +BOOTLOADER_SIZE = 512 +PROGRAM_CMD = $(HID_BOOTLOADER_CLI) -mmcu=$(MCU) -w -v $(BUILD_DIR)/$(TARGET).hex +``` + +nanoBoot can be found here: [nanoBoot](https://github.com/sigprof/nanoBoot) I used the string-descriptors branch as it was the latest update. + +To ISP Flash nanoBoot: `avrdude -p atmega32u4 -c avrisp -U flash:w:/Users/DempseyTech/nanoBoot/nanoBoot.hex:i -P /dev/cu.usbmodem123451 -U lfuse:w:0x7F:m -U hfuse:w:0xD6:m -U efuse:w:0xC7:m` + +You will need to change the path in the CLI command to match your file structure. + +QMK Toolbox will not recognize controllers using nanoBoot, instead use the CLI to flash. + +To Flash: `qmk flash -kb splitkb/kyria/rev1 -km john-ezra -bl hid_bootloader` diff --git a/keyboards/splitkb/kyria/keymaps/john-ezra/rules.mk b/keyboards/splitkb/kyria/keymaps/john-ezra/rules.mk index b86789c09c..87026b8756 100644 --- a/keyboards/splitkb/kyria/keymaps/john-ezra/rules.mk +++ b/keyboards/splitkb/kyria/keymaps/john-ezra/rules.mk @@ -8,5 +8,12 @@ GRAVE_ESC_ENABLE = no # Disable Grave Escape MOUSEKEY_ENABLE = no # Disable Mousekeys WPM_ENABLE = yes # Enable WPM Counter (Works with default wpm files, but works better with vectorstorm updated wpm.c and wpm.h -> https://github.com/vectorstorm/qmk_firmware/tree/wpm_exact) KEY_OVERRIDE_ENABLE = yes # Enable Key Overrides +CONSOLE_ENABLE = no + +DEBOUNCE_TYPE = sym_eager_pk + +BOOTLOADER = hid # This Keymap Uses nanoBoot, more info in readme +BOOTLOADER_SIZE = 512 +PROGRAM_CMD = $(HID_BOOTLOADER_CLI) -mmcu=$(MCU) -w -v $(BUILD_DIR)/$(TARGET).hex SRC += oled.c From 20a689e27cd84c1b80fc2db54bff5a4225cbf6bd Mon Sep 17 00:00:00 2001 From: rhmokey <57172003+rhmokey@users.noreply.github.com> Date: Sat, 2 Oct 2021 22:59:47 +0800 Subject: [PATCH 176/595] [Keyboard] Modify mokey64 (#14612) Co-authored-by: Ryan --- keyboards/mokey/README.md | 2 +- keyboards/mokey/mokey64/config.h | 17 ++++-------- .../mokey/mokey64/keymaps/default/keymap.c | 1 - keyboards/mokey/mokey64/keymaps/via/keymap.c | 26 ++++++++++++++++--- keyboards/mokey/mokey64/readme.md | 4 +-- keyboards/mokey/mokey64/rules.mk | 10 +++---- 6 files changed, 35 insertions(+), 25 deletions(-) diff --git a/keyboards/mokey/README.md b/keyboards/mokey/README.md index 3a878ea8ee..f66e1ed71a 100644 --- a/keyboards/mokey/README.md +++ b/keyboards/mokey/README.md @@ -2,6 +2,6 @@ This is a series of PCB * Mokey63 multi-column,The chip is ATmega32U4 -* Mokey64 The chip is STM32F401 +* Mokey64 The chip is ATmega32U4 diff --git a/keyboards/mokey/mokey64/config.h b/keyboards/mokey/mokey64/config.h index d410f8fafe..79b96b4e27 100644 --- a/keyboards/mokey/mokey64/config.h +++ b/keyboards/mokey/mokey64/config.h @@ -26,19 +26,12 @@ along with this program. If not, see . #define MATRIX_ROWS 5 #define MATRIX_COLS 14 -#define MATRIX_ROW_PINS { A1, A2, A3, A4, A5 } -#define MATRIX_COL_PINS { B0, B1, B2, B3, B4, B5, B6, B7, B8, B9, B10, B11, B12, B13 } +#define MATRIX_ROW_PINS { B1, B2, B3, B4, B5 } +#define MATRIX_COL_PINS { C7, F6, F5, F4, F1, E6, D0, D2, D1, D3, D5, D4, D6, D7 } #define UNUSED_PINS +/* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION COL2ROW -#define DEBOUNCE 5 - -#define RGB_DI_PIN A7 -#define RGBLED_NUM 68 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE - -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE \ No newline at end of file +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 \ No newline at end of file diff --git a/keyboards/mokey/mokey64/keymaps/default/keymap.c b/keyboards/mokey/mokey64/keymaps/default/keymap.c index 5d6e8f4d43..de38570e91 100644 --- a/keyboards/mokey/mokey64/keymaps/default/keymap.c +++ b/keyboards/mokey/mokey64/keymaps/default/keymap.c @@ -18,7 +18,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { LAYOUT( - /*0 1 2 3 4 5 6 7 8 9 a b c d*/ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, diff --git a/keyboards/mokey/mokey64/keymaps/via/keymap.c b/keyboards/mokey/mokey64/keymaps/via/keymap.c index 8a1ae3dba7..f44f38e8ea 100644 --- a/keyboards/mokey/mokey64/keymaps/via/keymap.c +++ b/keyboards/mokey/mokey64/keymaps/via/keymap.c @@ -18,12 +18,32 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - LAYOUT( - /*0 1 2 3 4 5 6 7 8 9 a b c d*/ + [0] = LAYOUT( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_DEL, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_GRV, KC_LEFT, KC_DOWN, KC_RGHT) + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_GRV, KC_LEFT, KC_DOWN, KC_RGHT), + + [1] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [2] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [3] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) }; diff --git a/keyboards/mokey/mokey64/readme.md b/keyboards/mokey/mokey64/readme.md index c25f61c040..5feb849bc4 100644 --- a/keyboards/mokey/mokey64/readme.md +++ b/keyboards/mokey/mokey64/readme.md @@ -2,10 +2,10 @@ ![mokey](https://rhmokey.github.io/update/index/64v13.jpg) -Support STM32F401 keyboard. +Support Atmega32u4 keyboard. * Keyboard Maintainer: [rhmokey](https://github.com/rhmokey) -* Hardware Supported: STM32F401 +* Hardware Supported: Atmega32u4 ## Bootloader * **Physical reset button**: Short press the button on the back of the PCB to enter the Bootloader and flash the firmware diff --git a/keyboards/mokey/mokey64/rules.mk b/keyboards/mokey/mokey64/rules.mk index 186091bf2f..6da271964f 100644 --- a/keyboards/mokey/mokey64/rules.mk +++ b/keyboards/mokey/mokey64/rules.mk @@ -1,23 +1,21 @@ # MCU name -MCU = STM32F401 +MCU = atmega32u4 # Bootloader selection -BOOTLOADER = stm32-dfu +BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration -MOUSEKEY_ENABLE = yes # Mouse keys +MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control -KEYBOARD_SHARED_EP = yes CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -NKRO_ENABLE = yes # USB Nkey Rollover +NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output - From 0eaefb2a6c35fdf15b067181529eacb7335fd562 Mon Sep 17 00:00:00 2001 From: mechlovin <57231893+mechlovin@users.noreply.github.com> Date: Sat, 2 Oct 2021 08:00:05 -0700 Subject: [PATCH 177/595] [Keyboard] Add Olly BB PCB (#14545) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- keyboards/mechlovin/olly/bb/bb.c | 36 ++ keyboards/mechlovin/olly/bb/bb.h | 33 ++ keyboards/mechlovin/olly/bb/config.h | 72 ++++ keyboards/mechlovin/olly/bb/info.json | 101 +++++ .../olly/bb/keymaps/default/keymap.c | 48 +++ .../olly/bb/keymaps/default/readme.md | 1 + .../mechlovin/olly/bb/keymaps/via/keymap.c | 48 +++ .../mechlovin/olly/bb/keymaps/via/readme.md | 1 + .../mechlovin/olly/bb/keymaps/via/rules.mk | 2 + keyboards/mechlovin/olly/bb/matrix.c | 362 ++++++++++++++++++ keyboards/mechlovin/olly/bb/readme.md | 23 ++ keyboards/mechlovin/olly/bb/rules.mk | 27 ++ 12 files changed, 754 insertions(+) create mode 100644 keyboards/mechlovin/olly/bb/bb.c create mode 100644 keyboards/mechlovin/olly/bb/bb.h create mode 100644 keyboards/mechlovin/olly/bb/config.h create mode 100644 keyboards/mechlovin/olly/bb/info.json create mode 100644 keyboards/mechlovin/olly/bb/keymaps/default/keymap.c create mode 100644 keyboards/mechlovin/olly/bb/keymaps/default/readme.md create mode 100644 keyboards/mechlovin/olly/bb/keymaps/via/keymap.c create mode 100644 keyboards/mechlovin/olly/bb/keymaps/via/readme.md create mode 100644 keyboards/mechlovin/olly/bb/keymaps/via/rules.mk create mode 100644 keyboards/mechlovin/olly/bb/matrix.c create mode 100644 keyboards/mechlovin/olly/bb/readme.md create mode 100644 keyboards/mechlovin/olly/bb/rules.mk diff --git a/keyboards/mechlovin/olly/bb/bb.c b/keyboards/mechlovin/olly/bb/bb.c new file mode 100644 index 0000000000..6ec4a15ee5 --- /dev/null +++ b/keyboards/mechlovin/olly/bb/bb.c @@ -0,0 +1,36 @@ +/* Copyright 2021 mechlovin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "bb.h" + + +void led_init_ports(void) { + setPinOutput(C0); + setPinOutput(D0); + setPinOutput(D1); + setPinOutput(C1); + setPinOutput(C6); +} + +__attribute__((weak)) layer_state_t layer_state_set_user(layer_state_t state) { + writePin(D1, layer_state_cmp(state, 1)); + writePin(D0, layer_state_cmp(state, 2)); + writePin(C1, layer_state_cmp(state, 3)); + writePin(C0, layer_state_cmp(state, 4)); + writePin(C6, layer_state_cmp(state, 5)); + + return state; +} diff --git a/keyboards/mechlovin/olly/bb/bb.h b/keyboards/mechlovin/olly/bb/bb.h new file mode 100644 index 0000000000..91a8f23896 --- /dev/null +++ b/keyboards/mechlovin/olly/bb/bb.h @@ -0,0 +1,33 @@ +/* Copyright 2021 mechlovin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +#define LAYOUT_all( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K1D, K0E, K0F, K0G, K0H, K0I, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K2E, K1E, K1F, K1G, K1H, K1I, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2F, K2G, K2H, K2I, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, \ + K40, K41, K43, K46, K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, K0H, K0I }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I }, \ + { K40, K41, KC_NO, K43, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I }, \ +} diff --git a/keyboards/mechlovin/olly/bb/config.h b/keyboards/mechlovin/olly/bb/config.h new file mode 100644 index 0000000000..3110a9589c --- /dev/null +++ b/keyboards/mechlovin/olly/bb/config.h @@ -0,0 +1,72 @@ +/* +Copyright 2021 mechlovin + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4D4C +#define PRODUCT_ID 0xD181 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Mechlovin.Studio +#define PRODUCT Olly BB + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 19 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS {D6, A5, A4, A3, A6} +#define UNUSED_PINS + +#define BACKLIGHT_PIN D4 +#define BACKLIGHT_BREATHING + +#define LED_NUM_LOCK_PIN B1 +#define LED_CAPS_LOCK_PIN B0 +#define LED_SCROLL_LOCK_PIN B2 +#define LED_PIN_ON_STATE 1 + +#ifdef RGBLIGHT_ENABLE +#define RGB_DI_PIN B3 +#define RGBLED_NUM 24 +#define RGBLIGHT_LIMIT_VAL 255 +#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE +#endif +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 diff --git a/keyboards/mechlovin/olly/bb/info.json b/keyboards/mechlovin/olly/bb/info.json new file mode 100644 index 0000000000..90e07662fd --- /dev/null +++ b/keyboards/mechlovin/olly/bb/info.json @@ -0,0 +1,101 @@ +{ + "keyboard_name": "Mechlovin Olly", + "url": "", + "maintainer": "Mechlovin' Studio", + "layouts": { + "LAYOUT": { + "layout": [ + { "label": "K00 (B0,B5)", "x": 0, "y": 0 }, + { "label": "K01 (B0,B6)", "x": 1, "y": 0 }, + { "label": "K02 (B0,B7)", "x": 2, "y": 0 }, + { "label": "K03 (B0,C0)", "x": 3, "y": 0 }, + { "label": "K04 (B0,C1)", "x": 4, "y": 0 }, + { "label": "K05 (B0,C2)", "x": 5, "y": 0 }, + { "label": "K06 (B0,C3)", "x": 6, "y": 0 }, + { "label": "K07 (B0,C4)", "x": 7, "y": 0 }, + { "label": "K08 (B0,C5)", "x": 8, "y": 0 }, + { "label": "K09 (B0,C6)", "x": 9, "y": 0 }, + { "label": "K0A (B0,C7)", "x": 10, "y": 0 }, + { "label": "K0B (B0,D0)", "x": 11, "y": 0 }, + { "label": "K0C (B0,D1)", "x": 12, "y": 0 }, + { "label": "K0D (B0,D2)", "x": 13, "y": 0 }, + { "label": "K1D (B1,D2)", "x": 14, "y": 0 }, + { "label": "K0E (B0,D3)", "x": 15.25, "y": 0 }, + { "label": "K0F (B0,D4)", "x": 16.5, "y": 0 }, + { "label": "K0G (B0,D5)", "x": 17.5, "y": 0 }, + { "label": "K0H (B0,D6)", "x": 18.5, "y": 0 }, + { "label": "K0I (B0,D7)", "x": 19.5, "y": 0 }, + { "label": "K10 (B1,B5)", "x": 0, "y": 1, "w": 1.5 }, + { "label": "K11 (B1,B6)", "x": 1.5, "y": 1 }, + { "label": "K12 (B1,B7)", "x": 2.5, "y": 1 }, + { "label": "K13 (B1,C0)", "x": 3.5, "y": 1 }, + { "label": "K14 (B1,C1)", "x": 4.5, "y": 1 }, + { "label": "K15 (B1,C2)", "x": 5.5, "y": 1 }, + { "label": "K16 (B1,C3)", "x": 6.5, "y": 1 }, + { "label": "K17 (B1,C4)", "x": 7.5, "y": 1 }, + { "label": "K18 (B1,C5)", "x": 8.5, "y": 1 }, + { "label": "K19 (B1,C6)", "x": 9.5, "y": 1 }, + { "label": "K1A (B1,C7)", "x": 10.5, "y": 1 }, + { "label": "K1B (B1,D0)", "x": 11.5, "y": 1 }, + { "label": "K1C (B1,D1)", "x": 12.5, "y": 1 }, + { "label": "K2E (B2,D3)", "x": 13.5, "y": 1, "w": 1.5 }, + { "label": "K1E (B1,D3)", "x": 15.25, "y": 1 }, + { "label": "K1F (B1,D4)", "x": 16.5, "y": 1 }, + { "label": "K1G (B1,D5)", "x": 17.5, "y": 1 }, + { "label": "K1H (B1,D6)", "x": 18.5, "y": 1 }, + { "label": "K1I (B1,D7)", "x": 19.5, "y": 1 }, + { "label": "K20 (B2,B5)", "x": 0, "y": 2, "w": 1.75 }, + { "label": "K21 (B2,B6)", "x": 1.75, "y": 2 }, + { "label": "K22 (B2,B7)", "x": 2.75, "y": 2 }, + { "label": "K23 (B2,C0)", "x": 3.75, "y": 2 }, + { "label": "K24 (B2,C1)", "x": 4.75, "y": 2 }, + { "label": "K25 (B2,C2)", "x": 5.75, "y": 2 }, + { "label": "K26 (B2,C3)", "x": 6.75, "y": 2 }, + { "label": "K27 (B2,C4)", "x": 7.75, "y": 2 }, + { "label": "K28 (B2,C5)", "x": 8.75, "y": 2 }, + { "label": "K29 (B2,C6)", "x": 9.75, "y": 2 }, + { "label": "K2A (B2,C7)", "x": 10.75, "y": 2 }, + { "label": "K2B (B2,D0)", "x": 11.75, "y": 2 }, + { "label": "K2C (B2,D1)", "x": 12.75, "y": 2 }, + { "label": "K2D (B2,D2)", "x": 13.75, "y": 2, "w": 1.25 }, + { "label": "K2F (B2,D4)", "x": 16.5, "y": 2 }, + { "label": "K2G (B2,D5)", "x": 17.5, "y": 2 }, + { "label": "K2H (B2,D6)", "x": 18.5, "y": 2 }, + { "label": "K2I (B2,D7)", "x": 19.5, "y": 2 }, + { "label": "K30 (B3,B5)", "x": 0, "y": 3, "w": 1.25 }, + { "label": "K31 (B3,B6)", "x": 1.25, "y": 3 }, + { "label": "K32 (B3,B7)", "x": 2.25, "y": 3 }, + { "label": "K33 (B3,C0)", "x": 3.25, "y": 3 }, + { "label": "K34 (B3,C1)", "x": 4.25, "y": 3 }, + { "label": "K35 (B3,C2)", "x": 5.25, "y": 3 }, + { "label": "K36 (B3,C3)", "x": 6.25, "y": 3 }, + { "label": "K37 (B3,C4)", "x": 7.25, "y": 3 }, + { "label": "K38 (B3,C5)", "x": 8.25, "y": 3 }, + { "label": "K39 (B3,C6)", "x": 9.25, "y": 3 }, + { "label": "K3A (B3,C7)", "x": 10.25, "y": 3 }, + { "label": "K3B (B3,D0)", "x": 11.25, "y": 3 }, + { "label": "K3C (B3,D1)", "x": 12.25, "y": 3, "w": 1.75 }, + { "label": "K3D (B3,D2)", "x": 14, "y": 3 }, + { "label": "K3F (B3,D4)", "x": 16.5, "y": 3 }, + { "label": "K3G (B3,D5)", "x": 17.5, "y": 3 }, + { "label": "K3H (B3,D6)", "x": 18.5, "y": 3 }, + { "label": "K3I (B3,D7)", "x": 19.5, "y": 3 }, + { "label": "K3E (B3,D3)", "x": 15.25, "y": 3.25 }, + { "label": "K40 (B4,B5)", "x": 0, "y": 4, "w": 1.5 }, + { "label": "K41 (B4,B6)", "x": 1.5, "y": 4 }, + { "label": "K43 (B4,C0)", "x": 2.5, "y": 4, "w": 1.5 }, + { "label": "K46 (B4,C3)", "x": 4, "y": 4, "w": 6.25 }, + { "label": "K4A (B4,C7)", "x": 10.25, "y": 4, "w": 1.25 }, + { "label": "K4B (B4,D0)", "x": 11.5, "y": 4, "w": 1.25 }, + { "label": "K4C (B4,D1)", "x": 12.75, "y": 4, "w": 1.25 }, + { "label": "K4G (B4,D5)", "x": 17.5, "y": 4 }, + { "label": "K4H (B4,D6)", "x": 18.5, "y": 4 }, + { "label": "K4I (B4,D7)", "x": 19.5, "y": 4 }, + { "label": "K4D (B4,D2)", "x": 14.25, "y": 4.25 }, + { "label": "K4E (B4,D3)", "x": 15.25, "y": 4.25 }, + { "label": "K4F (B4,D4)", "x": 16.25, "y": 4.25 } + ] + } + } + ,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/" +} diff --git a/keyboards/mechlovin/olly/bb/keymaps/default/keymap.c b/keyboards/mechlovin/olly/bb/keymaps/default/keymap.c new file mode 100644 index 0000000000..c7c0da223e --- /dev/null +++ b/keyboards/mechlovin/olly/bb/keymaps/default/keymap.c @@ -0,0 +1,48 @@ +/* Copyright 2021 mechlovin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_INS, KC_NLCK, KC_PSLS, KC_PAST, KC_PAUS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_P7, KC_P8, KC_P9, KC_PMNS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT, KC_SPC, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT + ), + [1] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + +}; \ No newline at end of file diff --git a/keyboards/mechlovin/olly/bb/keymaps/default/readme.md b/keyboards/mechlovin/olly/bb/keymaps/default/readme.md new file mode 100644 index 0000000000..2fa087aa1d --- /dev/null +++ b/keyboards/mechlovin/olly/bb/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for Olly BB diff --git a/keyboards/mechlovin/olly/bb/keymaps/via/keymap.c b/keyboards/mechlovin/olly/bb/keymaps/via/keymap.c new file mode 100644 index 0000000000..c7c0da223e --- /dev/null +++ b/keyboards/mechlovin/olly/bb/keymaps/via/keymap.c @@ -0,0 +1,48 @@ +/* Copyright 2021 mechlovin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_INS, KC_NLCK, KC_PSLS, KC_PAST, KC_PAUS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_P7, KC_P8, KC_P9, KC_PMNS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT, KC_SPC, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT + ), + [1] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + +}; \ No newline at end of file diff --git a/keyboards/mechlovin/olly/bb/keymaps/via/readme.md b/keyboards/mechlovin/olly/bb/keymaps/via/readme.md new file mode 100644 index 0000000000..bc577158bb --- /dev/null +++ b/keyboards/mechlovin/olly/bb/keymaps/via/readme.md @@ -0,0 +1 @@ +# The VIA keymap for Olly BB \ No newline at end of file diff --git a/keyboards/mechlovin/olly/bb/keymaps/via/rules.mk b/keyboards/mechlovin/olly/bb/keymaps/via/rules.mk new file mode 100644 index 0000000000..36b7ba9cbc --- /dev/null +++ b/keyboards/mechlovin/olly/bb/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/mechlovin/olly/bb/matrix.c b/keyboards/mechlovin/olly/bb/matrix.c new file mode 100644 index 0000000000..d745f7d2cd --- /dev/null +++ b/keyboards/mechlovin/olly/bb/matrix.c @@ -0,0 +1,362 @@ +/* +Copyright 2012-2018 Jun Wako, Jack Humbert, Yiancar +Copyright 2019 Evy Dekkers + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include "matrix.h" + +static const pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; + +/* Cols 0 - 16 + * These columns use two 74HC138 3 to 8 bit demultiplexer. B4, C7 is the enable pin, must be set high (1) to use it. + * + * col / pin: PA0 PA1 PA2 PB4 PC7 PC2 PC3 PC5 + * 0: 0 ── 0 ── 0 1 ── 0 0 0 0 + * ──────────────────────────────────────────── + * 1: 0 ── 0 ── 1 1 ── 0 0 0 0 + * ──────────────────────────────────────────── + * 2: 0 ── 1 ── 0 1 ── 0 0 0 0 + * ──────────────────────────────────────────── + * 3: 0 ── 1 ── 1 1 ── 0 0 0 0 + * ──────────────────────────────────────────── + * 4: 1 ── 0 ── 0 1 ── 0 0 0 0 + * ──────────────────────────────────────────── + * 5: 1 ── 0 ── 1 1 ── 0 0 0 0 + * ──────────────────────────────────────────── + * 6: 1 ── 1 ── 0 1 ── 0 0 0 0 + * ──────────────────────────────────────────── + * 7: 1 ── 1 ── 1 1 ── 0 0 0 0 + * ──────────────────────────────────────────── + * 8: 1 ── 1 ── 1 0 ── 1 0 0 0 + * ──────────────────────────────────────────── + * 9: 0 ── 0 ── 0 0 ── 1 0 0 0 + * ──────────────────────────────────────────── + *10: 0 ── 0 ── 1 0 ── 1 0 0 0 + * ──────────────────────────────────────────── + *11: 0 ── 1 ── 0 0 ── 1 0 0 0 + * ──────────────────────────────────────────── + *12: 0 ── 1 ── 1 0 ── 1 0 0 0 + * ──────────────────────────────────────────── + *13: 1 ── 0 ── 0 0 ── 1 0 0 0 + * ──────────────────────────────────────────── + *14: 1 ── 0 ── 1 0 ── 1 0 0 0 + * ──────────────────────────────────────────── + *15: 1 ── 1 ── 0 0 ── 1 0 0 0 + * ──────────────────────────────────────────── + *16: 0 ── 0 ── 0 0 ── 0 1 0 0 + * ──────────────────────────────────────────── + *17: 0 ── 0 ── 0 0 ── 0 0 1 0 + * ──────────────────────────────────────────── + *18: 0 ── 0 ── 0 0 ── 0 0 0 1 + * + */ +static void select_col(uint8_t col) { + switch (col) { + case 0: + writePinLow(A0); + writePinLow(A1); + writePinLow(A2); + writePinHigh(B4); + break; + case 1: + writePinLow(A0); + writePinLow(A1); + writePinHigh(A2); + writePinHigh(B4); + break; + case 2: + writePinLow(A0); + writePinHigh(A1); + writePinLow(A2); + writePinHigh(B4); + break; + case 3: + writePinLow(A0); + writePinHigh(A1); + writePinHigh(A2); + writePinHigh(B4); + break; + case 4: + writePinHigh(A0); + writePinLow(A1); + writePinLow(A2); + writePinHigh(B4); + break; + case 5: + writePinHigh(A0); + writePinLow(A1); + writePinHigh(A2); + writePinHigh(B4); + break; + case 6: + writePinHigh(A0); + writePinHigh(A1); + writePinLow(A2); + writePinHigh(B4); + break; + case 7: + writePinHigh(A0); + writePinHigh(A1); + writePinHigh(A2); + writePinHigh(B4); + break; + case 8: + writePinHigh(A0); + writePinHigh(A1); + writePinHigh(A2); + writePinHigh(C7); + break; + case 9: + writePinLow(A0); + writePinLow(A1); + writePinLow(A2); + writePinHigh(C7); + break; + case 10: + writePinLow(A0); + writePinLow(A1); + writePinHigh(A2); + writePinHigh(C7); + break; + case 11: + writePinLow(A0); + writePinHigh(A1); + writePinLow(A2); + writePinHigh(C7); + break; + case 12: + writePinLow(A0); + writePinHigh(A1); + writePinHigh(A2); + writePinHigh(C7); + break; + case 13: + writePinHigh(A0); + writePinLow(A1); + writePinLow(A2); + writePinHigh(C7); + break; + case 14: + writePinHigh(A0); + writePinLow(A1); + writePinHigh(A2); + writePinHigh(C7); + break; + case 15: + writePinHigh(A0); + writePinHigh(A1); + writePinLow(A2); + writePinHigh(C7); + break; + case 16: + writePinLow(C2); + break; + case 17: + writePinLow(C3); + break; + case 18: + writePinLow(C5); + break; + } +} + +static void unselect_col(uint8_t col) { + switch (col) { + case 0: + writePinHigh(A0); + writePinHigh(A1); + writePinHigh(A2); + writePinLow(B4); + break; + case 1: + writePinHigh(A0); + writePinHigh(A1); + writePinLow(A2); + writePinLow(B4); + break; + case 2: + writePinHigh(A0); + writePinLow(A1); + writePinHigh(A2); + writePinLow(B4); + break; + case 3: + writePinHigh(A0); + writePinLow(A1); + writePinLow(A2); + writePinLow(B4); + break; + case 4: + writePinLow(A0); + writePinHigh(A1); + writePinHigh(A2); + writePinLow(B4); + break; + case 5: + writePinLow(A0); + writePinHigh(A1); + writePinLow(A2); + writePinLow(B4); + break; + case 6: + writePinLow(A0); + writePinLow(A1); + writePinHigh(A2); + writePinLow(B4); + break; + case 7: + writePinLow(A0); + writePinLow(A1); + writePinLow(A2); + writePinLow(B4); + break; + case 8: + writePinLow(A0); + writePinLow(A1); + writePinLow(A2); + writePinLow(C7); + break; + case 9: + writePinHigh(A0); + writePinHigh(A1); + writePinHigh(A2); + writePinLow(C7); + break; + case 10: + writePinHigh(A0); + writePinHigh(A1); + writePinLow(A2); + writePinLow(C7); + break; + case 11: + writePinHigh(A0); + writePinLow(A1); + writePinHigh(A2); + writePinLow(C7); + break; + case 12: + writePinHigh(A0); + writePinLow(A1); + writePinLow(A2); + writePinLow(C7); + break; + case 13: + writePinLow(A0); + writePinHigh(A1); + writePinHigh(A2); + writePinLow(C7); + break; + case 14: + writePinLow(A0); + writePinHigh(A1); + writePinLow(A2); + writePinLow(C7); + break; + case 15: + writePinLow(A0); + writePinLow(A1); + writePinHigh(A2); + writePinLow(C7); + break; + case 16: + writePinHigh(C2); + break; + case 17: + writePinHigh(C3); + break; + case 18: + writePinHigh(C5); + break; + } +} + +static void unselect_cols(void) { + //Native + writePinHigh(C2); + writePinHigh(C3); + writePinHigh(C5); + + //Demultiplexer + writePinLow(B4); + writePinLow(C7); + writePinHigh(A0); + writePinHigh(A1); + writePinHigh(A2); +} + +static void init_pins(void) { + unselect_cols(); + for (uint8_t x = 0; x < MATRIX_ROWS; x++) { + setPinInputHigh(row_pins[x]); + } + setPinOutput(A0); + setPinOutput(A1); + setPinOutput(A2); + setPinOutput(B4); + setPinOutput(C7); + setPinOutput(C2); + setPinOutput(C3); + setPinOutput(C5); +} + +static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) { + bool matrix_changed = false; + + // Select col and wait for col selecton to stabilize + select_col(current_col); + matrix_io_delay(); + + // For each row... + for (uint8_t row_index = 0; row_index < MATRIX_ROWS; row_index++) { + // Store last value of row prior to reading + matrix_row_t last_row_value = current_matrix[row_index]; + + // Check row pin state + if (readPin(row_pins[row_index]) == 0) { + // Pin LO, set col bit + current_matrix[row_index] |= (MATRIX_ROW_SHIFTER << current_col); + } else { + // Pin HI, clear col bit + current_matrix[row_index] &= ~(MATRIX_ROW_SHIFTER << current_col); + } + + // Determine if the matrix changed state + if ((last_row_value != current_matrix[row_index]) && !(matrix_changed)) { + matrix_changed = true; + } + } + + // Unselect col + unselect_col(current_col); + + return matrix_changed; +} + +void matrix_init_custom(void) { + // initialize key pins + init_pins(); +} + +bool matrix_scan_custom(matrix_row_t current_matrix[]) { + bool changed = false; + + // Set col, read rows + for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { + changed |= read_rows_on_col(current_matrix, current_col); + } + + return changed; +} diff --git a/keyboards/mechlovin/olly/bb/readme.md b/keyboards/mechlovin/olly/bb/readme.md new file mode 100644 index 0000000000..0e41a3072f --- /dev/null +++ b/keyboards/mechlovin/olly/bb/readme.md @@ -0,0 +1,23 @@ +# Mechlovin Olly BB + +![jf](https://i.imgur.com/3QzHisYl.png) + +Olly BB PCB, compatible Duck Black Bird keyboard. + +* Keyboard Maintainer: [Mechlovin' Studio](https://mechlovin.studio/) +* Hardware Supported: Duck Black Bird Korean Kustom +* Hardware Availability: [Mechlovin' Studio](https://mechlovin.studio/) + +Make example for this keyboard (after setting up your build environment): + + make mechlovin/olly/bb:default + +Flashing example for this keyboard: + + make mechlovin/olly/bb:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +**Reset Key:** 2 ways to put the Olly JF into bootloader: +By keycode: Tap RESET keycode. +By bootloader: hold ESC key while plugging in \ No newline at end of file diff --git a/keyboards/mechlovin/olly/bb/rules.mk b/keyboards/mechlovin/olly/bb/rules.mk new file mode 100644 index 0000000000..b5b3be65b2 --- /dev/null +++ b/keyboards/mechlovin/olly/bb/rules.mk @@ -0,0 +1,27 @@ +# MCU name +MCU = atmega32a + +# Processor frequency +F_CPU = 16000000 + +# Bootloader selection +BOOTLOADER = usbasploader + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +CUSTOM_MATRIX = lite + +SRC += matrix.c From 875bbd31dc46d14a3a87d633081d1ba9c1225923 Mon Sep 17 00:00:00 2001 From: ai03 Date: Sun, 3 Oct 2021 00:06:37 +0900 Subject: [PATCH 178/595] [Keyboard] Add JP60 keyboard (#14219) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- keyboards/ai03/jp60/config.h | 109 ++++++ keyboards/ai03/jp60/info.json | 342 ++++++++++++++++++ keyboards/ai03/jp60/jp60.c | 17 + keyboards/ai03/jp60/jp60.h | 42 +++ keyboards/ai03/jp60/keymaps/default/config.h | 21 ++ keyboards/ai03/jp60/keymaps/default/keymap.c | 40 ++ keyboards/ai03/jp60/keymaps/default/readme.md | 3 + keyboards/ai03/jp60/keymaps/default/rules.mk | 1 + keyboards/ai03/jp60/keymaps/via/config.h | 21 ++ keyboards/ai03/jp60/keymaps/via/keymap.c | 57 +++ keyboards/ai03/jp60/keymaps/via/readme.md | 3 + keyboards/ai03/jp60/keymaps/via/rules.mk | 2 + keyboards/ai03/jp60/readme.md | 27 ++ keyboards/ai03/jp60/rules.mk | 22 ++ 14 files changed, 707 insertions(+) create mode 100644 keyboards/ai03/jp60/config.h create mode 100644 keyboards/ai03/jp60/info.json create mode 100644 keyboards/ai03/jp60/jp60.c create mode 100644 keyboards/ai03/jp60/jp60.h create mode 100644 keyboards/ai03/jp60/keymaps/default/config.h create mode 100644 keyboards/ai03/jp60/keymaps/default/keymap.c create mode 100644 keyboards/ai03/jp60/keymaps/default/readme.md create mode 100644 keyboards/ai03/jp60/keymaps/default/rules.mk create mode 100644 keyboards/ai03/jp60/keymaps/via/config.h create mode 100644 keyboards/ai03/jp60/keymaps/via/keymap.c create mode 100644 keyboards/ai03/jp60/keymaps/via/readme.md create mode 100644 keyboards/ai03/jp60/keymaps/via/rules.mk create mode 100644 keyboards/ai03/jp60/readme.md create mode 100644 keyboards/ai03/jp60/rules.mk diff --git a/keyboards/ai03/jp60/config.h b/keyboards/ai03/jp60/config.h new file mode 100644 index 0000000000..a06d75c8e5 --- /dev/null +++ b/keyboards/ai03/jp60/config.h @@ -0,0 +1,109 @@ +/* +Copyright 2021 ai03 + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xA103 +#define PRODUCT_ID 0x0024 +#define DEVICE_VER 0x0001 +#define MANUFACTURER ai03 Design Studio +#define PRODUCT JP60 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { B6, B5, B4, D7, E6 } +#define MATRIX_COL_PINS { D2, D1, D3, D5, D4, D6, C6, F0, F1, F4, F5, F6, F7, C7 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/ai03/jp60/info.json b/keyboards/ai03/jp60/info.json new file mode 100644 index 0000000000..d5453de734 --- /dev/null +++ b/keyboards/ai03/jp60/info.json @@ -0,0 +1,342 @@ +{ + "keyboard_name": "JP60", + "url": "https://github.com/ai03-2725/JP60", + "maintainer": "ai03", + "layouts": { + "LAYOUT": { + "layout": [ + { + "label": "Esc", + "x": 0, + "y": 0 + }, + { + "label": "!", + "x": 1, + "y": 0 + }, + { + "label": "\"", + "x": 2, + "y": 0 + }, + { + "label": "#", + "x": 3, + "y": 0 + }, + { + "label": "$", + "x": 4, + "y": 0 + }, + { + "label": "%", + "x": 5, + "y": 0 + }, + { + "label": "&", + "x": 6, + "y": 0 + }, + { + "label": "'", + "x": 7, + "y": 0 + }, + { + "label": "(", + "x": 8, + "y": 0 + }, + { + "label": ")", + "x": 9, + "y": 0 + }, + { + "label": "", + "x": 10, + "y": 0 + }, + { + "label": "=", + "x": 11, + "y": 0 + }, + { + "label": "~", + "x": 12, + "y": 0 + }, + { + "label": "|", + "x": 13, + "y": 0 + }, + { + "label": "Back Space", + "x": 14, + "y": 0 + }, + { + "label": "Tab", + "x": 0, + "y": 1, + "w": 1.5 + }, + { + "label": "Q", + "x": 1.5, + "y": 1 + }, + { + "label": "W", + "x": 2.5, + "y": 1 + }, + { + "label": "E", + "x": 3.5, + "y": 1 + }, + { + "label": "R", + "x": 4.5, + "y": 1 + }, + { + "label": "T", + "x": 5.5, + "y": 1 + }, + { + "label": "Y", + "x": 6.5, + "y": 1 + }, + { + "label": "U", + "x": 7.5, + "y": 1 + }, + { + "label": "I", + "x": 8.5, + "y": 1 + }, + { + "label": "O", + "x": 9.5, + "y": 1 + }, + { + "label": "P", + "x": 10.5, + "y": 1 + }, + { + "label": "`", + "x": 11.5, + "y": 1 + }, + { + "label": "{", + "x": 12.5, + "y": 1 + }, + { + "label": "Enter", + "x": 13.75, + "y": 1, + "w": 1.25, + "h": 2 + }, + { + "label": "Fn", + "x": 0, + "y": 2, + "w": 1.75 + }, + { + "label": "A", + "x": 1.75, + "y": 2 + }, + { + "label": "S", + "x": 2.75, + "y": 2 + }, + { + "label": "D", + "x": 3.75, + "y": 2 + }, + { + "label": "F", + "x": 4.75, + "y": 2 + }, + { + "label": "G", + "x": 5.75, + "y": 2 + }, + { + "label": "H", + "x": 6.75, + "y": 2 + }, + { + "label": "J", + "x": 7.75, + "y": 2 + }, + { + "label": "K", + "x": 8.75, + "y": 2 + }, + { + "label": "L", + "x": 9.75, + "y": 2 + }, + { + "label": "+", + "x": 10.75, + "y": 2 + }, + { + "label": "*", + "x": 11.75, + "y": 2 + }, + { + "label": "}", + "x": 12.75, + "y": 2 + }, + { + "label": "Shift", + "x": 0, + "y": 3, + "w": 2.25 + }, + { + "label": "Z", + "x": 2.25, + "y": 3 + }, + { + "label": "X", + "x": 3.25, + "y": 3 + }, + { + "label": "C", + "x": 4.25, + "y": 3 + }, + { + "label": "V", + "x": 5.25, + "y": 3 + }, + { + "label": "B", + "x": 6.25, + "y": 3 + }, + { + "label": "N", + "x": 7.25, + "y": 3 + }, + { + "label": "M", + "x": 8.25, + "y": 3 + }, + { + "label": "<", + "x": 9.25, + "y": 3 + }, + { + "label": ">", + "x": 10.25, + "y": 3 + }, + { + "label": "?", + "x": 11.25, + "y": 3 + }, + { + "label": "_", + "x": 12.25, + "y": 3 + }, + { + "label": "Shift", + "x": 13.25, + "y": 3, + "w": 1.75 + }, + { + "label": "Ctrl", + "x": 0, + "y": 4, + "w": 1.25 + }, + { + "label": "Win", + "x": 1.25, + "y": 4 + }, + { + "label": "Alt", + "x": 2.25, + "y": 4 + }, + { + "label": "\u7121\u5909\u63db", + "x": 3.25, + "y": 4, + "w": 1.25 + }, + { + "label": "", + "x": 4.5, + "y": 4, + "w": 6 + }, + { + "label": "\u5909\u63db", + "x": 10.5, + "y": 4, + "w": 1.25 + }, + { + "label": "\u304b\u306a", + "x": 11.75, + "y": 4 + }, + { + "label": "\u534a\u89d2 \u5168\u89d2 \u6f22\u5b57", + "x": 12.75, + "y": 4 + }, + { + "label": "Caps Lock", + "x": 13.75, + "y": 4, + "w": 1.25 + } + ] + } + } +} \ No newline at end of file diff --git a/keyboards/ai03/jp60/jp60.c b/keyboards/ai03/jp60/jp60.c new file mode 100644 index 0000000000..c18a99c6a6 --- /dev/null +++ b/keyboards/ai03/jp60/jp60.c @@ -0,0 +1,17 @@ +/* Copyright 2021 ai03 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "jp60.h" diff --git a/keyboards/ai03/jp60/jp60.h b/keyboards/ai03/jp60/jp60.h new file mode 100644 index 0000000000..9635e2f3ce --- /dev/null +++ b/keyboards/ai03/jp60/jp60.h @@ -0,0 +1,42 @@ +/* Copyright 2021 ai03 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K212, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K113, K213, \ + K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, \ + K400, K401, K402, K403, K407, K410, K411, K412, K413 \ +) \ +{ \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213 }, \ + { K300, KC_NO, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313 }, \ + { K400, K401, K402, K403, KC_NO, KC_NO, KC_NO, K407, KC_NO, KC_NO, K410, K411, K412, K413 } \ +} diff --git a/keyboards/ai03/jp60/keymaps/default/config.h b/keyboards/ai03/jp60/keymaps/default/config.h new file mode 100644 index 0000000000..ee63d9feee --- /dev/null +++ b/keyboards/ai03/jp60/keymaps/default/config.h @@ -0,0 +1,21 @@ +/* Copyright 2021 ai03 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +/* Increase polling rates and scan quantity for improved performance */ +#define USB_POLLING_INTERVAL_MS 1 +#define QMK_KEYS_PER_SCAN 12 diff --git a/keyboards/ai03/jp60/keymaps/default/keymap.c b/keyboards/ai03/jp60/keymaps/default/keymap.c new file mode 100644 index 0000000000..f26c2a9080 --- /dev/null +++ b/keyboards/ai03/jp60/keymaps/default/keymap.c @@ -0,0 +1,40 @@ +/* Copyright 2021 ai03 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H +#include "keymap_jp.h" + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT( /* Base */ + KC_ESC, JP_1, JP_2, JP_3, JP_4, JP_5, JP_6, JP_7, JP_8, JP_9, JP_0, JP_MINS, JP_CIRC, JP_YEN, KC_DEL, + KC_TAB, JP_Q, JP_W, JP_E, JP_R, JP_T, JP_Y, JP_U, JP_I, JP_O, JP_P, JP_AT, JP_LBRC, + MO(1), JP_A, JP_S, JP_D, JP_F, JP_G, JP_H, JP_J, JP_K, JP_L, JP_SCLN, JP_COLN, JP_RBRC, KC_ENT, + KC_LSFT, JP_Z, JP_X, JP_C, JP_V, JP_B, JP_N, JP_M, JP_COMM, JP_DOT, JP_SLSH, JP_BSLS, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, JP_MHEN, KC_SPC, JP_HENK, JP_KANA, JP_ZKHK, JP_EISU + ), + [_FN] = LAYOUT( /* FN */ + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, + _______, _______, KC_PGUP, _______, _______, _______, _______, _______, KC_UP, _______, _______, _______, _______, + _______, KC_HOME, KC_PGDN, KC_END, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/ai03/jp60/keymaps/default/readme.md b/keyboards/ai03/jp60/keymaps/default/readme.md new file mode 100644 index 0000000000..a240bd9052 --- /dev/null +++ b/keyboards/ai03/jp60/keymaps/default/readme.md @@ -0,0 +1,3 @@ +# The default keymap for JP60 + +Configured for JIS input. \ No newline at end of file diff --git a/keyboards/ai03/jp60/keymaps/default/rules.mk b/keyboards/ai03/jp60/keymaps/default/rules.mk new file mode 100644 index 0000000000..edac26d087 --- /dev/null +++ b/keyboards/ai03/jp60/keymaps/default/rules.mk @@ -0,0 +1 @@ +DEBOUNCE_TYPE = asym_eager_defer_pk # Specify per-key debounce for improved responsiveness \ No newline at end of file diff --git a/keyboards/ai03/jp60/keymaps/via/config.h b/keyboards/ai03/jp60/keymaps/via/config.h new file mode 100644 index 0000000000..ee63d9feee --- /dev/null +++ b/keyboards/ai03/jp60/keymaps/via/config.h @@ -0,0 +1,21 @@ +/* Copyright 2021 ai03 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +/* Increase polling rates and scan quantity for improved performance */ +#define USB_POLLING_INTERVAL_MS 1 +#define QMK_KEYS_PER_SCAN 12 diff --git a/keyboards/ai03/jp60/keymaps/via/keymap.c b/keyboards/ai03/jp60/keymaps/via/keymap.c new file mode 100644 index 0000000000..5c8f9ecf65 --- /dev/null +++ b/keyboards/ai03/jp60/keymaps/via/keymap.c @@ -0,0 +1,57 @@ +/* Copyright 2021 ai03 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H +#include "keymap_jp.h" + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN1, + _FN2, + _FN3 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT( /* Base */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_JYEN, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, + MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC, KC_HENK, KC_KANA, KC_GRV, KC_CAPS + ), + [_FN1] = LAYOUT( /* FN1 */ + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, + _______, _______, KC_PGUP, _______, _______, _______, _______, _______, KC_UP, _______, _______, _______, _______, + _______, KC_HOME, KC_PGDN, KC_END, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [_FN2] = LAYOUT( /* FN2 */ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [_FN3] = LAYOUT( /* FN3 */ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + +}; diff --git a/keyboards/ai03/jp60/keymaps/via/readme.md b/keyboards/ai03/jp60/keymaps/via/readme.md new file mode 100644 index 0000000000..f6e9c3d8c6 --- /dev/null +++ b/keyboards/ai03/jp60/keymaps/via/readme.md @@ -0,0 +1,3 @@ +# The via keymap for JP60 + +For use with VIA configurator and compatible keymap editors. \ No newline at end of file diff --git a/keyboards/ai03/jp60/keymaps/via/rules.mk b/keyboards/ai03/jp60/keymaps/via/rules.mk new file mode 100644 index 0000000000..4956961bef --- /dev/null +++ b/keyboards/ai03/jp60/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes # Enable compatibility with VIA-protocol configurators +DEBOUNCE_TYPE = asym_eager_defer_pk # Specify per-key debounce for improved responsiveness \ No newline at end of file diff --git a/keyboards/ai03/jp60/readme.md b/keyboards/ai03/jp60/readme.md new file mode 100644 index 0000000000..25a3b16413 --- /dev/null +++ b/keyboards/ai03/jp60/readme.md @@ -0,0 +1,27 @@ +# JP60 + +![JP60](https://github.com/ai03-2725/JP60/raw/main/Render/Front.png) + +GH60-compatible JIS-like hotswap keyboard PCB + +* Keyboard Maintainer: [ai03](https://github.com/ai03-2725) +* Hardware Supported: [JP60 PCB](https://github.com/ai03-2725/JP60) +* Hardware Availability: To be made available in JP market soon; will be listed in the repo above + +Make example for this keyboard (after setting up your build environment): + + make ai03/jp60:default + +Flashing example for this keyboard: + + make ai03/jp60:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available diff --git a/keyboards/ai03/jp60/rules.mk b/keyboards/ai03/jp60/rules.mk new file mode 100644 index 0000000000..2dcf0bf77c --- /dev/null +++ b/keyboards/ai03/jp60/rules.mk @@ -0,0 +1,22 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +LTO_ENABLE = yes # Optimize firmware at link time \ No newline at end of file From 0acedbe09fb5e92fa5df722799aebc3edd9e2c8d Mon Sep 17 00:00:00 2001 From: 4pplet Date: Sat, 2 Oct 2021 17:17:54 +0200 Subject: [PATCH 179/595] [Keyboard] Adding kbnordic nordic60 (#14555) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan Co-authored-by: 4pplet <4pplet@protonmail.com> Co-authored-by: 4pplet --- keyboards/kbnordic/nordic60/info.json | 212 ++++++++++++++++++ .../kbnordic/nordic60/keymaps/all/keymap.c | 34 +++ .../nordic60/keymaps/default/keymap.c | 34 +++ .../nordic60/keymaps/default_ansi/keymap.c | 34 +++ .../kbnordic/nordic60/keymaps/via/keymap.c | 48 ++++ .../kbnordic/nordic60/keymaps/via/rules.mk | 1 + keyboards/kbnordic/nordic60/readme.md | 20 ++ keyboards/kbnordic/nordic60/rev_a/config.h | 61 +++++ keyboards/kbnordic/nordic60/rev_a/readme.md | 12 + keyboards/kbnordic/nordic60/rev_a/rev_a.c | 17 ++ keyboards/kbnordic/nordic60/rev_a/rev_a.h | 64 ++++++ keyboards/kbnordic/nordic60/rev_a/rules.mk | 21 ++ 12 files changed, 558 insertions(+) create mode 100644 keyboards/kbnordic/nordic60/info.json create mode 100644 keyboards/kbnordic/nordic60/keymaps/all/keymap.c create mode 100644 keyboards/kbnordic/nordic60/keymaps/default/keymap.c create mode 100644 keyboards/kbnordic/nordic60/keymaps/default_ansi/keymap.c create mode 100644 keyboards/kbnordic/nordic60/keymaps/via/keymap.c create mode 100644 keyboards/kbnordic/nordic60/keymaps/via/rules.mk create mode 100644 keyboards/kbnordic/nordic60/readme.md create mode 100644 keyboards/kbnordic/nordic60/rev_a/config.h create mode 100644 keyboards/kbnordic/nordic60/rev_a/readme.md create mode 100644 keyboards/kbnordic/nordic60/rev_a/rev_a.c create mode 100644 keyboards/kbnordic/nordic60/rev_a/rev_a.h create mode 100644 keyboards/kbnordic/nordic60/rev_a/rules.mk diff --git a/keyboards/kbnordic/nordic60/info.json b/keyboards/kbnordic/nordic60/info.json new file mode 100644 index 0000000000..266e7fde4a --- /dev/null +++ b/keyboards/kbnordic/nordic60/info.json @@ -0,0 +1,212 @@ +{ + "keyboard_name": "Nordic60 Rev A", + "url": "kbnordic.se", + "maintainer": "4pplet", + "layouts": { + + "LAYOUT_iso": { + "layout": [ + { "label": "~", "x": 0, "y": 0 }, + { "label": "!", "x": 1, "y": 0 }, + { "label": "@", "x": 2, "y": 0 }, + { "label": "#", "x": 3, "y": 0 }, + { "label": "$", "x": 4, "y": 0 }, + { "label": "%", "x": 5, "y": 0 }, + { "label": "^", "x": 6, "y": 0 }, + { "label": "&", "x": 7, "y": 0 }, + { "label": "*", "x": 8, "y": 0 }, + { "label": "(", "x": 9, "y": 0 }, + { "label": ")", "x": 10, "y": 0 }, + { "label": "_", "x": 11, "y": 0 }, + { "label": "+", "x": 12, "y": 0 }, + { "label": "Backspace", "w": 2, "x": 13, "y": 0 }, + { "label": "Tab", "w": 1.5, "x": 0, "y": 1 }, + { "label": "Q", "x": 1.5, "y": 1 }, + { "label": "W", "x": 2.5, "y": 1 }, + { "label": "E", "x": 3.5, "y": 1 }, + { "label": "R", "x": 4.5, "y": 1 }, + { "label": "T", "x": 5.5, "y": 1 }, + { "label": "Y", "x": 6.5, "y": 1 }, + { "label": "U", "x": 7.5, "y": 1 }, + { "label": "I", "x": 8.5, "y": 1 }, + { "label": "O", "x": 9.5, "y": 1 }, + { "label": "P", "x": 10.5, "y": 1 }, + { "label": "{", "x": 11.5, "y": 1 }, + { "label": "}", "x": 12.5, "y": 1 }, + { "h": 2, "label": "ISO", "w": 1.25, "x": 13.75, "y": 1 }, + { "label": "Caps Lock", "w": 1.75, "x": 0, "y": 2 }, + { "label": "A", "x": 1.75, "y": 2 }, + { "label": "S", "x": 2.75, "y": 2 }, + { "label": "D", "x": 3.75, "y": 2 }, + { "label": "F", "x": 4.75, "y": 2 }, + { "label": "G", "x": 5.75, "y": 2 }, + { "label": "H", "x": 6.75, "y": 2 }, + { "label": "J", "x": 7.75, "y": 2 }, + { "label": "K", "x": 8.75, "y": 2 }, + { "label": "L", "x": 9.75, "y": 2 }, + { "label": ":", "x": 10.75, "y": 2 }, + { "label": "\"", "x": 11.75, "y": 2 }, + { "label": "ISO", "x": 12.75, "y": 2 }, + { "label": "Shift", "w": 1.25, "x": 0, "y": 3 }, + { "label": "ISO", "x": 1.25, "y": 3 }, + { "label": "Z", "x": 2.25, "y": 3 }, + { "label": "X", "x": 3.25, "y": 3 }, + { "label": "C", "x": 4.25, "y": 3 }, + { "label": "V", "x": 5.25, "y": 3 }, + { "label": "B", "x": 6.25, "y": 3 }, + { "label": "N", "x": 7.25, "y": 3 }, + { "label": "M", "x": 8.25, "y": 3 }, + { "label": "<", "x": 9.25, "y": 3 }, + { "label": ">", "x": 10.25, "y": 3 }, + { "label": "?", "x": 11.25, "y": 3 }, + { "label": "Shift", "w": 1.75, "x": 12.25, "y": 3 }, + { "label": "Fn", "x": 14, "y": 3 }, + { "label": "Ctrl", "w": 1.25, "x": 0, "y": 4 }, + { "label": "Win", "w": 1.25, "x": 1.25, "y": 4 }, + { "label": "Alt", "w": 1.25, "x": 2.5, "y": 4 }, + { "w": 6.25, "x": 3.75, "y": 4 }, + { "label": "Alt", "w": 1.25, "x": 10, "y": 4 }, + { "label": "Win", "w": 1.25, "x": 11.25, "y": 4 }, + { "label": "Menu", "w": 1.25, "x": 12.5, "y": 4 }, + { "label": "Ctrl", "w": 1.25, "x": 13.75, "y": 4 } + ] + }, + + "LAYOUT_ansi": { + "layout": [ + { "label": "~", "x": 0, "y": 0 }, + { "label": "!", "x": 1, "y": 0 }, + { "label": "@", "x": 2, "y": 0 }, + { "label": "#", "x": 3, "y": 0 }, + { "label": "$", "x": 4, "y": 0 }, + { "label": "%", "x": 5, "y": 0 }, + { "label": "^", "x": 6, "y": 0 }, + { "label": "&", "x": 7, "y": 0 }, + { "label": "*", "x": 8, "y": 0 }, + { "label": "(", "x": 9, "y": 0 }, + { "label": ")", "x": 10, "y": 0 }, + { "label": "_", "x": 11, "y": 0 }, + { "label": "+", "x": 12, "y": 0 }, + { "label": "Backspace", "w": 2, "x": 13, "y": 0 }, + { "label": "Tab", "w": 1.5, "x": 0, "y": 1 }, + { "label": "Q", "x": 1.5, "y": 1 }, + { "label": "W", "x": 2.5, "y": 1 }, + { "label": "E", "x": 3.5, "y": 1 }, + { "label": "R", "x": 4.5, "y": 1 }, + { "label": "T", "x": 5.5, "y": 1 }, + { "label": "Y", "x": 6.5, "y": 1 }, + { "label": "U", "x": 7.5, "y": 1 }, + { "label": "I", "x": 8.5, "y": 1 }, + { "label": "O", "x": 9.5, "y": 1 }, + { "label": "P", "x": 10.5, "y": 1 }, + { "label": "{", "x": 11.5, "y": 1 }, + { "label": "}", "x": 12.5, "y": 1 }, + { "label": "|", "w": 1.5, "x": 13.5, "y": 1 }, + { "label": "Caps Lock", "w": 1.75, "x": 0, "y": 2 }, + { "label": "A", "x": 1.75, "y": 2 }, + { "label": "S", "x": 2.75, "y": 2 }, + { "label": "D", "x": 3.75, "y": 2 }, + { "label": "F", "x": 4.75, "y": 2 }, + { "label": "G", "x": 5.75, "y": 2 }, + { "label": "H", "x": 6.75, "y": 2 }, + { "label": "J", "x": 7.75, "y": 2 }, + { "label": "K", "x": 8.75, "y": 2 }, + { "label": "L", "x": 9.75, "y": 2 }, + { "label": ":", "x": 10.75, "y": 2 }, + { "label": "\"", "x": 11.75, "y": 2 }, + { "label": "Enter", "w": 2.25, "x": 12.75, "y": 2 }, + { "label": "Shift", "w": 2.25, "x": 0, "y": 3 }, + { "label": "Z", "x": 2.25, "y": 3 }, + { "label": "X", "x": 3.25, "y": 3 }, + { "label": "C", "x": 4.25, "y": 3 }, + { "label": "V", "x": 5.25, "y": 3 }, + { "label": "B", "x": 6.25, "y": 3 }, + { "label": "N", "x": 7.25, "y": 3 }, + { "label": "M", "x": 8.25, "y": 3 }, + { "label": "<", "x": 9.25, "y": 3 }, + { "label": ">", "x": 10.25, "y": 3 }, + { "label": "?", "x": 11.25, "y": 3 }, + { "label": "Shift", "w": 1.75, "x": 12.25, "y": 3 }, + { "label": "Fn", "x": 14, "y": 3 }, + { "label": "Ctrl", "w": 1.25, "x": 0, "y": 4 }, + { "label": "Win", "w": 1.25, "x": 1.25, "y": 4 }, + { "label": "Alt", "w": 1.25, "x": 2.5, "y": 4 }, + { "w": 6.25, "x": 3.75, "y": 4 }, + { "label": "Alt", "w": 1.25, "x": 10, "y": 4 }, + { "label": "Win", "w": 1.25, "x": 11.25, "y": 4 }, + { "label": "Menu", "w": 1.25, "x": 12.5, "y": 4 }, + { "label": "Ctrl", "w": 1.25, "x": 13.75, "y": 4 } + ] + }, + "LAYOUT_all": { + "layout": [ + { "label": "~", "x": 0, "y": 0 }, + { "label": "!", "x": 1, "y": 0 }, + { "label": "@", "x": 2, "y": 0 }, + { "label": "#", "x": 3, "y": 0 }, + { "label": "$", "x": 4, "y": 0 }, + { "label": "%", "x": 5, "y": 0 }, + { "label": "^", "x": 6, "y": 0 }, + { "label": "&", "x": 7, "y": 0 }, + { "label": "*", "x": 8, "y": 0 }, + { "label": "(", "x": 9, "y": 0 }, + { "label": ")", "x": 10, "y": 0 }, + { "label": "_", "x": 11, "y": 0 }, + { "label": "+", "x": 12, "y": 0 }, + { "x": 13, "y": 0 }, + { "x": 14, "y": 0 }, + { "label": "Tab", "w": 1.5, "x": 0, "y": 1 }, + { "label": "Q", "x": 1.5, "y": 1 }, + { "label": "W", "x": 2.5, "y": 1 }, + { "label": "E", "x": 3.5, "y": 1 }, + { "label": "R", "x": 4.5, "y": 1 }, + { "label": "T", "x": 5.5, "y": 1 }, + { "label": "Y", "x": 6.5, "y": 1 }, + { "label": "U", "x": 7.5, "y": 1 }, + { "label": "I", "x": 8.5, "y": 1 }, + { "label": "O", "x": 9.5, "y": 1 }, + { "label": "P", "x": 10.5, "y": 1 }, + { "label": "{", "x": 11.5, "y": 1 }, + { "label": "}", "x": 12.5, "y": 1 }, + { "label": "|", "w": 1.5, "x": 13.5, "y": 1 }, + { "label": "Caps Lock", "w": 1.75, "x": 0, "y": 2 }, + { "label": "A", "x": 1.75, "y": 2 }, + { "label": "S", "x": 2.75, "y": 2 }, + { "label": "D", "x": 3.75, "y": 2 }, + { "label": "F", "x": 4.75, "y": 2 }, + { "label": "G", "x": 5.75, "y": 2 }, + { "label": "H", "x": 6.75, "y": 2 }, + { "label": "J", "x": 7.75, "y": 2 }, + { "label": "K", "x": 8.75, "y": 2 }, + { "label": "L", "x": 9.75, "y": 2 }, + { "label": ":", "x": 10.75, "y": 2 }, + { "label": "\"", "x": 11.75, "y": 2 }, + { "label": "Enter", "w": 2.25, "x": 12.75, "y": 2 }, + { "label": "Shift", "w": 1.25, "x": 0, "y": 3 }, + { "label": "ISO", "x": 1.25, "y": 3 }, + { "label": "Z", "x": 2.25, "y": 3 }, + { "label": "X", "x": 3.25, "y": 3 }, + { "label": "C", "x": 4.25, "y": 3 }, + { "label": "V", "x": 5.25, "y": 3 }, + { "label": "B", "x": 6.25, "y": 3 }, + { "label": "N", "x": 7.25, "y": 3 }, + { "label": "M", "x": 8.25, "y": 3 }, + { "label": "<", "x": 9.25, "y": 3 }, + { "label": ">", "x": 10.25, "y": 3 }, + { "label": "?", "x": 11.25, "y": 3 }, + { "label": "Shift", "w": 1.75, "x": 12.25, "y": 3 }, + { "label": "Fn", "x": 14, "y": 3 }, + { "label": "Ctrl", "w": 1.25, "x": 0, "y": 4 }, + { "label": "Win", "w": 1.25, "x": 1.25, "y": 4 }, + { "label": "Alt", "w": 1.25, "x": 2.5, "y": 4 }, + { "w": 6.25, "x": 3.75, "y": 4 }, + { "label": "Alt", "w": 1.25, "x": 10, "y": 4 }, + { "label": "Win", "w": 1.25, "x": 11.25, "y": 4 }, + { "label": "Menu", "w": 1.25, "x": 12.5, "y": 4 }, + { "label": "Ctrl", "w": 1.25, "x": 13.75, "y": 4 } + ] + } + + + } +} diff --git a/keyboards/kbnordic/nordic60/keymaps/all/keymap.c b/keyboards/kbnordic/nordic60/keymaps/all/keymap.c new file mode 100644 index 0000000000..57475e95ed --- /dev/null +++ b/keyboards/kbnordic/nordic60/keymaps/all/keymap.c @@ -0,0 +1,34 @@ +/* +Copyright 2021 Stefan Sundin "4pplet" <4pplet@protonmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +// main layer +[0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_NUHS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL), +// basic function layer +[1] = LAYOUT_all( + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) +}; diff --git a/keyboards/kbnordic/nordic60/keymaps/default/keymap.c b/keyboards/kbnordic/nordic60/keymaps/default/keymap.c new file mode 100644 index 0000000000..715fdaacad --- /dev/null +++ b/keyboards/kbnordic/nordic60/keymaps/default/keymap.c @@ -0,0 +1,34 @@ +/* +Copyright 2021 Stefan Sundin "4pplet" <4pplet@protonmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +// main layer +[0] = LAYOUT_iso( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_ENT, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL), +// basic function layer +[1] = LAYOUT_iso( + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, + KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) +}; diff --git a/keyboards/kbnordic/nordic60/keymaps/default_ansi/keymap.c b/keyboards/kbnordic/nordic60/keymaps/default_ansi/keymap.c new file mode 100644 index 0000000000..1ebde8e180 --- /dev/null +++ b/keyboards/kbnordic/nordic60/keymaps/default_ansi/keymap.c @@ -0,0 +1,34 @@ +/* +Copyright 2021 Stefan Sundin "4pplet" <4pplet@protonmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +// main layer +[0] = LAYOUT_ansi( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL), +// basic function layer +[1] = LAYOUT_ansi( + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, + KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) +}; diff --git a/keyboards/kbnordic/nordic60/keymaps/via/keymap.c b/keyboards/kbnordic/nordic60/keymaps/via/keymap.c new file mode 100644 index 0000000000..f8fe78c268 --- /dev/null +++ b/keyboards/kbnordic/nordic60/keymaps/via/keymap.c @@ -0,0 +1,48 @@ +/* +Copyright 2021 Stefan Sundin "4pplet" <4pplet@protonmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +// main layer +[0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_NUHS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL), +// basic function layer +[1] = LAYOUT_all( + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), +// extra layer for VIA +[2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), +// extra layer for VIA +[3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) +}; diff --git a/keyboards/kbnordic/nordic60/keymaps/via/rules.mk b/keyboards/kbnordic/nordic60/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/kbnordic/nordic60/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/kbnordic/nordic60/readme.md b/keyboards/kbnordic/nordic60/readme.md new file mode 100644 index 0000000000..7b4f29d22e --- /dev/null +++ b/keyboards/kbnordic/nordic60/readme.md @@ -0,0 +1,20 @@ +# nordic60 + +PCB designed for kbnordic.se + +* Keyboard Maintainer: [4pplet](https://github.com/4pplet) +* Hardware Supported: nordic60 + +Make example for this keyboard (after setting up your build environment): + + make kbnordic/nordic60/rev_a:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the ESC key +* **Physical reset button**: Briefly press the button on the back of the PCB (S301) or short the two pads in the "RST" header. +* **Keycode in layout**: Press the key mapped to `RESET` if it is available diff --git a/keyboards/kbnordic/nordic60/rev_a/config.h b/keyboards/kbnordic/nordic60/rev_a/config.h new file mode 100644 index 0000000000..be555417d7 --- /dev/null +++ b/keyboards/kbnordic/nordic60/rev_a/config.h @@ -0,0 +1,61 @@ +/* +Copyright 2021 Stefan Sundin "4pplet" <4pplet@protonmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4445 +#define PRODUCT_ID 0x0001 +#define DEVICE_VER 0x0001 +#define MANUFACTURER KBNORDIC +#define PRODUCT Nordic60 Rev A + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 +// ROWS: Top to bottom, COLS: Left to right + +#define MATRIX_ROW_PINS {C2,D0,B0,D6,D5} +#define MATRIX_COL_PINS {C4,C5,D2,C6,C7,B7,B6,B5,B4,B3,B2,B1,D1,D4} + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +#define RGB_DI_PIN D3 +#define RGBLED_NUM 16 +#define BACKLIGHT_LEVELS 5 + +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE diff --git a/keyboards/kbnordic/nordic60/rev_a/readme.md b/keyboards/kbnordic/nordic60/rev_a/readme.md new file mode 100644 index 0000000000..230a84a616 --- /dev/null +++ b/keyboards/kbnordic/nordic60/rev_a/readme.md @@ -0,0 +1,12 @@ +# nordic60 + +PCB designed for kbnordic.se + +* Keyboard Maintainer: [4pplet](https://github.com/4pplet) +* Hardware Supported: nordic60 + +Make example for this keyboard (after setting up your build environment): + + make kbnordic/nordic60/rev_a:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/kbnordic/nordic60/rev_a/rev_a.c b/keyboards/kbnordic/nordic60/rev_a/rev_a.c new file mode 100644 index 0000000000..7c92220811 --- /dev/null +++ b/keyboards/kbnordic/nordic60/rev_a/rev_a.c @@ -0,0 +1,17 @@ +/* +Copyright 2021 Stefan Sundin "4pplet" <4pplet@protonmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include "rev_a.h" diff --git a/keyboards/kbnordic/nordic60/rev_a/rev_a.h b/keyboards/kbnordic/nordic60/rev_a/rev_a.h new file mode 100644 index 0000000000..9b925efaac --- /dev/null +++ b/keyboards/kbnordic/nordic60/rev_a/rev_a.h @@ -0,0 +1,64 @@ +/* +Copyright 2021 Stefan Sundin "4pplet" <4pplet@protonmail.com> + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#pragma once + +#include "quantum.h" + +#define LAYOUT_all( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k1d, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k2c, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \ + k40, k41, k42, k46, k4a, k4b, k4c, k4d \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \ + {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \ + {k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO, KC_NO, KC_NO, k4a, k4b, k4c, k4d}, \ +} + +#define LAYOUT_iso( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k1d, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k2d, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \ + k40, k41, k42, k46, k4a, k4b, k4c, k4d \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, KC_NO}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \ + {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \ + {k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO, KC_NO, KC_NO, k4a, k4b, k4c, k4d}, \ +} + +#define LAYOUT_ansi( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k1d, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k2c, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \ + k40, k41, k42, k46, k4a, k4b, k4c, k4d \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, KC_NO}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \ + {k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \ + {k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO, KC_NO, KC_NO, k4a, k4b, k4c, k4d}, \ +} diff --git a/keyboards/kbnordic/nordic60/rev_a/rules.mk b/keyboards/kbnordic/nordic60/rev_a/rules.mk new file mode 100644 index 0000000000..895a77853d --- /dev/null +++ b/keyboards/kbnordic/nordic60/rev_a/rules.mk @@ -0,0 +1,21 @@ +# MCU name +MCU = atmega32u2 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output From 5ece2846b6a4d7ad82a26b2d68d0ec85705f5155 Mon Sep 17 00:00:00 2001 From: Christian Sandven Date: Sun, 3 Oct 2021 21:01:15 +0200 Subject: [PATCH 180/595] [Keyboard] Fix key routing for Keyprez Rhino ergo keys (#14589) --- keyboards/keyprez/rhino/rhino.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/keyboards/keyprez/rhino/rhino.h b/keyboards/keyprez/rhino/rhino.h index 30ebb94cbc..1547717a87 100644 --- a/keyboards/keyprez/rhino/rhino.h +++ b/keyboards/keyprez/rhino/rhino.h @@ -52,12 +52,12 @@ k60, k61, k62, k63, k64, k65, k66, k67, k68, k69 \ ) { \ { k00, k01, k02, k03, k04, k05, k06 }, \ - { k20, k21, k22, k23, k24, k25, k26 }, \ - { k40, k41, k42, k43, k44, k45, KC_NO }, \ + { k20, k21, k22, k23, k24, k25, KC_NO }, \ + { k40, k41, k42, k43, k44, k45, k26 }, \ { KC_NO, k60, k61, k62, k63, KC_NO, k64 }, \ { k07, k08, k09, k10, k11, k12, k13 }, \ - { k27, k28, k29, k30, k31, k32, k33 }, \ - { KC_NO, k48, k49, k50, k51, k52, k53 }, \ + { KC_NO, k28, k29, k30, k31, k32, k33 }, \ + { k27, k48, k49, k50, k51, k52, k53 }, \ { k65, KC_NO, k66, k67, k68, k69, k70 } \ } From eb5b24f97c8ab5f9ca85a5bbb60b3b806e1507e6 Mon Sep 17 00:00:00 2001 From: Purdea Andrei Date: Sun, 3 Oct 2021 22:02:05 +0300 Subject: [PATCH 181/595] Add LM() keys to the list of keys disabled by NO_HAPTIC_MOD (#14181) --- docs/feature_haptic_feedback.md | 1 + quantum/process_keycode/process_haptic.c | 1 + 2 files changed, 2 insertions(+) diff --git a/docs/feature_haptic_feedback.md b/docs/feature_haptic_feedback.md index 1f36f5b054..a12bb4bcd0 100644 --- a/docs/feature_haptic_feedback.md +++ b/docs/feature_haptic_feedback.md @@ -172,6 +172,7 @@ With the entry of `#define NO_HAPTIC_MOD` in config.h, the following keys will n * Usual modifier keys such as Control/Shift/Alt/Gui (For example `KC_LCTRL`) * `MO()` momentary keys. See also [Layers](feature_layers.md). +* `LM()` momentary keys with mod active. * `LT()` layer tap keys, when held to activate a layer. However when tapped, and the key is quickly released, and sends a keycode, haptic feedback is still triggered. * `TT()` layer tap toggle keys, when held to activate a layer. However when tapped `TAPPING_TOGGLE` times to permanently toggle the layer, on the last tap haptic feedback is still triggered. * `MT()` mod tap keys, when held to keep a usual modifier key pressed. However when tapped, and the key is quickly released, and sends a keycode, haptic feedback is still triggered. See also [Mod-Tap](mod_tap.md). diff --git a/quantum/process_keycode/process_haptic.c b/quantum/process_keycode/process_haptic.c index 64d455d009..1b9c2f24fa 100644 --- a/quantum/process_keycode/process_haptic.c +++ b/quantum/process_keycode/process_haptic.c @@ -32,6 +32,7 @@ __attribute__((weak)) bool get_haptic_enabled_key(uint16_t keycode, keyrecord_t break; case KC_LCTRL ... KC_RGUI: case QK_MOMENTARY ... QK_MOMENTARY_MAX: + case QK_LAYER_MOD ... QK_LAYER_MOD_MAX: #endif #ifdef NO_HAPTIC_FN case KC_FN0 ... KC_FN31: From 8782dc824d3d0ffddb087077ef94f728c18140db Mon Sep 17 00:00:00 2001 From: tiltowait <208040+tiltowait@users.noreply.github.com> Date: Sun, 3 Oct 2021 12:02:51 -0700 Subject: [PATCH 182/595] [Keyboard] Add anti-ghosting support to Model M Converter (#14049) --- keyboards/converter/modelm101/config.h | 3 +++ 1 file changed, 3 insertions(+) diff --git a/keyboards/converter/modelm101/config.h b/keyboards/converter/modelm101/config.h index 802d53ffdf..639b325ff3 100644 --- a/keyboards/converter/modelm101/config.h +++ b/keyboards/converter/modelm101/config.h @@ -50,6 +50,9 @@ along with this program. If not, see . /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed (5 is default) */ #define DEBOUNCE 5 +/* The Model M has no diodes */ +#define MATRIX_HAS_GHOST + /* * Feature disable options * These options are also useful to firmware size reduction. From 640869257f996b9f505e73f531b5343dc9124444 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Sun, 3 Oct 2021 14:17:23 -0700 Subject: [PATCH 183/595] [Keyboard] Disable RGBLIGHT on mokey64 (#14681) --- keyboards/mokey/mokey64/rules.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/keyboards/mokey/mokey64/rules.mk b/keyboards/mokey/mokey64/rules.mk index 6da271964f..a181895095 100644 --- a/keyboards/mokey/mokey64/rules.mk +++ b/keyboards/mokey/mokey64/rules.mk @@ -17,5 +17,5 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output From 6279399425c8893b586f68da06a719b94b48b4e2 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Sun, 3 Oct 2021 14:17:46 -0700 Subject: [PATCH 184/595] [Keyboard] Fix Mechlovin's Olly/BB keyboard matrix file (#14680) --- keyboards/mechlovin/olly/bb/matrix.c | 69 ++++++++++++++-------------- 1 file changed, 35 insertions(+), 34 deletions(-) diff --git a/keyboards/mechlovin/olly/bb/matrix.c b/keyboards/mechlovin/olly/bb/matrix.c index d745f7d2cd..e045299bae 100644 --- a/keyboards/mechlovin/olly/bb/matrix.c +++ b/keyboards/mechlovin/olly/bb/matrix.c @@ -17,6 +17,7 @@ along with this program. If not, see . */ #include "matrix.h" +#include "gpio.h" static const pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; @@ -27,40 +28,40 @@ static const pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; * 0: 0 ── 0 ── 0 1 ── 0 0 0 0 * ──────────────────────────────────────────── * 1: 0 ── 0 ── 1 1 ── 0 0 0 0 - * ──────────────────────────────────────────── - * 2: 0 ── 1 ── 0 1 ── 0 0 0 0 - * ──────────────────────────────────────────── - * 3: 0 ── 1 ── 1 1 ── 0 0 0 0 - * ──────────────────────────────────────────── - * 4: 1 ── 0 ── 0 1 ── 0 0 0 0 - * ──────────────────────────────────────────── - * 5: 1 ── 0 ── 1 1 ── 0 0 0 0 - * ──────────────────────────────────────────── - * 6: 1 ── 1 ── 0 1 ── 0 0 0 0 - * ──────────────────────────────────────────── - * 7: 1 ── 1 ── 1 1 ── 0 0 0 0 - * ──────────────────────────────────────────── - * 8: 1 ── 1 ── 1 0 ── 1 0 0 0 - * ──────────────────────────────────────────── - * 9: 0 ── 0 ── 0 0 ── 1 0 0 0 - * ──────────────────────────────────────────── - *10: 0 ── 0 ── 1 0 ── 1 0 0 0 - * ──────────────────────────────────────────── - *11: 0 ── 1 ── 0 0 ── 1 0 0 0 - * ──────────────────────────────────────────── - *12: 0 ── 1 ── 1 0 ── 1 0 0 0 - * ──────────────────────────────────────────── - *13: 1 ── 0 ── 0 0 ── 1 0 0 0 - * ──────────────────────────────────────────── - *14: 1 ── 0 ── 1 0 ── 1 0 0 0 - * ──────────────────────────────────────────── - *15: 1 ── 1 ── 0 0 ── 1 0 0 0 - * ──────────────────────────────────────────── - *16: 0 ── 0 ── 0 0 ── 0 1 0 0 - * ──────────────────────────────────────────── - *17: 0 ── 0 ── 0 0 ── 0 0 1 0 - * ──────────────────────────────────────────── - *18: 0 ── 0 ── 0 0 ── 0 0 0 1 + * ──────────────────────────────────────────── + * 2: 0 ── 1 ── 0 1 ── 0 0 0 0 + * ──────────────────────────────────────────── + * 3: 0 ── 1 ── 1 1 ── 0 0 0 0 + * ──────────────────────────────────────────── + * 4: 1 ── 0 ── 0 1 ── 0 0 0 0 + * ──────────────────────────────────────────── + * 5: 1 ── 0 ── 1 1 ── 0 0 0 0 + * ──────────────────────────────────────────── + * 6: 1 ── 1 ── 0 1 ── 0 0 0 0 + * ──────────────────────────────────────────── + * 7: 1 ── 1 ── 1 1 ── 0 0 0 0 + * ──────────────────────────────────────────── + * 8: 1 ── 1 ── 1 0 ── 1 0 0 0 + * ──────────────────────────────────────────── + * 9: 0 ── 0 ── 0 0 ── 1 0 0 0 + * ──────────────────────────────────────────── + *10: 0 ── 0 ── 1 0 ── 1 0 0 0 + * ──────────────────────────────────────────── + *11: 0 ── 1 ── 0 0 ── 1 0 0 0 + * ──────────────────────────────────────────── + *12: 0 ── 1 ── 1 0 ── 1 0 0 0 + * ──────────────────────────────────────────── + *13: 1 ── 0 ── 0 0 ── 1 0 0 0 + * ──────────────────────────────────────────── + *14: 1 ── 0 ── 1 0 ── 1 0 0 0 + * ──────────────────────────────────────────── + *15: 1 ── 1 ── 0 0 ── 1 0 0 0 + * ──────────────────────────────────────────── + *16: 0 ── 0 ── 0 0 ── 0 1 0 0 + * ──────────────────────────────────────────── + *17: 0 ── 0 ── 0 0 ── 0 0 1 0 + * ──────────────────────────────────────────── + *18: 0 ── 0 ── 0 0 ── 0 0 0 1 * */ static void select_col(uint8_t col) { From f72b2ad720b5b61a6e49b12a9375b97046ed5d8e Mon Sep 17 00:00:00 2001 From: Danny Date: Mon, 4 Oct 2021 01:35:00 -0400 Subject: [PATCH 185/595] [Keyboard] Add Iris Rev. 6 (#14683) Co-authored-by: Ryan --- keyboards/keebio/iris/iris.h | 2 + keyboards/keebio/iris/rev6/config.h | 91 +++++++++++++++++++++++++++++ keyboards/keebio/iris/rev6/rev6.c | 65 +++++++++++++++++++++ keyboards/keebio/iris/rev6/rev6.h | 42 +++++++++++++ keyboards/keebio/iris/rev6/rules.mk | 27 +++++++++ 5 files changed, 227 insertions(+) create mode 100644 keyboards/keebio/iris/rev6/config.h create mode 100644 keyboards/keebio/iris/rev6/rev6.c create mode 100644 keyboards/keebio/iris/rev6/rev6.h create mode 100644 keyboards/keebio/iris/rev6/rules.mk diff --git a/keyboards/keebio/iris/iris.h b/keyboards/keebio/iris/iris.h index 2f3b08d223..db0440a126 100644 --- a/keyboards/keebio/iris/iris.h +++ b/keyboards/keebio/iris/iris.h @@ -12,6 +12,8 @@ #include "rev4.h" #elif defined(KEYBOARD_keebio_iris_rev5) #include "rev5.h" +#elif defined(KEYBOARD_keebio_iris_rev6) + #include "rev6.h" #endif #include "quantum.h" diff --git a/keyboards/keebio/iris/rev6/config.h b/keyboards/keebio/iris/rev6/config.h new file mode 100644 index 0000000000..e821012a7d --- /dev/null +++ b/keyboards/keebio/iris/rev6/config.h @@ -0,0 +1,91 @@ +/* +Copyright 2021 Danny Nguyen + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xCB10 +#define PRODUCT_ID 0x6256 +#define DEVICE_VER 0x0600 +#define MANUFACTURER Keebio +#define PRODUCT Iris Rev. 6 + +/* key matrix size */ +// Rows are doubled-up +#define MATRIX_ROWS 10 +#define MATRIX_COLS 6 + +// wiring of each half +#define MATRIX_ROW_PINS { B1, F0, F5, B4, D7 } +#define MATRIX_COL_PINS { F1, F4, B5, C7, D4, D6 } +#define MATRIX_ROW_PINS_RIGHT { B1, F0, F5, B4, B5 } +#define MATRIX_COL_PINS_RIGHT { D4, D6, D7, C7, F1, F4 } +#define SPLIT_HAND_PIN D5 + +#define ENCODERS_PAD_A { B2 } +#define ENCODERS_PAD_B { B3 } +#define ENCODERS_PAD_A_RIGHT { B2 } +#define ENCODERS_PAD_B_RIGHT { B3 } + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ +// #define BACKLIGHT_LEVELS 3 + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* serial.c configuration for split keyboard */ +#define SOFT_SERIAL_PIN D0 + +/* ws2812 RGB LED */ +#define RGB_DI_PIN E6 +#ifdef RGB_DI_PIN +# define RGBLED_NUM 68 +# define RGBLED_SPLIT { 34, 34 } +# define RGBLIGHT_HUE_STEP 8 +# define RGBLIGHT_SAT_STEP 8 +# define RGBLIGHT_VAL_STEP 8 +# define RGBLIGHT_LIMIT_VAL 120 /* The maximum brightness level */ +# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== enabled animations ==*/ +# define RGBLIGHT_EFFECT_BREATHING +# define RGBLIGHT_EFFECT_RAINBOW_MOOD +# define RGBLIGHT_EFFECT_RAINBOW_SWIRL +# define RGBLIGHT_EFFECT_SNAKE +# define RGBLIGHT_EFFECT_KNIGHT +# define RGBLIGHT_EFFECT_CHRISTMAS +# define RGBLIGHT_EFFECT_STATIC_GRADIENT +# define RGBLIGHT_EFFECT_RGB_TEST +# define RGBLIGHT_EFFECT_ALTERNATING +# define RGBLIGHT_EFFECT_TWINKLE +# define RGBLIGHT_DEFAULT_VAL 120 +# define RGBLIGHT_DEFAULT_MODE (RGBLIGHT_MODE_RAINBOW_SWIRL + 2) +// RGB Matrix +# ifdef RGB_MATRIX_ENABLE +# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 160 +# define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS +# define DRIVER_LED_TOTAL RGBLED_NUM +# define RGB_MATRIX_SPLIT { 34, 34 } +# define RGB_DISABLE_WHEN_USB_SUSPENDED +//# define RGB_MATRIX_KEYPRESSES +# endif +#endif diff --git a/keyboards/keebio/iris/rev6/rev6.c b/keyboards/keebio/iris/rev6/rev6.c new file mode 100644 index 0000000000..ff9f9d25a1 --- /dev/null +++ b/keyboards/keebio/iris/rev6/rev6.c @@ -0,0 +1,65 @@ +/* +Copyright 2021 Danny Nguyen +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include "rev6.h" + +#ifdef RGB_MATRIX_ENABLE +led_config_t g_led_config = { { + // Key Matrix to LED Index + // Left Half + { 0, 1, 2, 3, 4, 5 }, + { 11, 10, 9, 8, 7, 6 }, + { 12, 13, 14, 15, 16, 17 }, + { 23, 22, 21, 20, 19, 18 }, + { NO_LED, NO_LED, 24, 25, 26, 27 }, + // Right Half + { 34, 35, 36, 37, 38, 39 }, + { 45, 44, 43, 42, 41, 40 }, + { 46, 47, 48, 49, 50, 51 }, + { 57, 56, 55, 54, 53, 52 }, + { NO_LED, NO_LED, 58, 59, 60, 61 } +}, { + // LED Index to Physical Position + // Left Half + { 0, 5 }, { 16, 5 }, { 32, 2 }, { 48, 0 }, { 64, 2 }, { 80, 3 }, + { 80, 17 }, { 64, 15 }, { 48, 13 }, { 32, 15 }, { 16, 18 }, { 0, 18 }, + { 0, 32 }, { 16, 32 }, { 32, 28 }, { 48, 27 }, { 64, 28 }, { 80, 30 }, + { 80, 43 }, { 64, 42 }, { 48, 40 }, { 32, 42 }, { 16, 45 }, { 0, 45 }, + { 56, 47 }, { 72, 58 }, { 90, 64 }, { 98, 52 }, + { 80, 58 }, { 40, 50 }, { 8, 43 }, { 8, 5 }, { 40, 1 }, { 72, 3 }, + // Right Half + { 224, 5 }, { 208, 5 }, { 192, 2 }, { 176, 0 }, { 160, 2 }, { 144, 3 }, + { 144, 18 }, { 160, 18 }, { 176, 15 }, { 192, 13 }, { 208, 15 }, { 244, 17 }, + { 224, 32 }, { 208, 32 }, { 192, 28 }, { 176, 27 }, { 160, 28 }, { 144, 30 }, + { 144, 45 }, { 160, 45 }, { 176, 42 }, { 192, 40 }, { 208, 42 }, { 244, 43 }, + { 168, 47 }, { 152, 58 }, { 134, 64 }, { 126, 52 }, + { 144, 58 }, { 184, 50 }, { 216, 43 }, { 216, 5 }, { 184, 1 }, { 152, 3 } +}, { + // LED Index to Flag + // Left Half + 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, + 2, 2, 2, 2, 2, 2, + // Right Half + 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, 4, 4, + 4, 4, 4, 4, + 2, 2, 2, 2, 2, 2 + +} }; +#endif diff --git a/keyboards/keebio/iris/rev6/rev6.h b/keyboards/keebio/iris/rev6/rev6.h new file mode 100644 index 0000000000..d13e24410e --- /dev/null +++ b/keyboards/keebio/iris/rev6/rev6.h @@ -0,0 +1,42 @@ +/* +Copyright 2021 Danny Nguyen + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "iris.h" +#include "quantum.h" + + +#define LAYOUT( \ + LA1, LA2, LA3, LA4, LA5, LA6, RA6, RA5, RA4, RA3, RA2, RA1, \ + LB1, LB2, LB3, LB4, LB5, LB6, RB6, RB5, RB4, RB3, RB2, RB1, \ + LC1, LC2, LC3, LC4, LC5, LC6, RC6, RC5, RC4, RC3, RC2, RC1, \ + LD1, LD2, LD3, LD4, LD5, LD6, LE6, RE6, RD6, RD5, RD4, RD3, RD2, RD1, \ + LE3, LE4, LE5, RE5, RE4, RE3 \ + ) \ + { \ + { LA1, LA2, LA3, LA4, LA5, LA6 }, \ + { LB1, LB2, LB3, LB4, LB5, LB6 }, \ + { LC1, LC2, LC3, LC4, LC5, LC6 }, \ + { LD1, LD2, LD3, LD4, LD5, LD6 }, \ + { KC_NO, KC_NO, LE3, LE4, LE5, LE6 }, \ + { RA1, RA2, RA3, RA4, RA5, RA6 }, \ + { RB1, RB2, RB3, RB4, RB5, RB6 }, \ + { RC1, RC2, RC3, RC4, RC5, RC6 }, \ + { RD1, RD2, RD3, RD4, RD5, RD6 }, \ + { KC_NO, KC_NO, RE3, RE4, RE5, RE6 } \ + } diff --git a/keyboards/keebio/iris/rev6/rules.mk b/keyboards/keebio/iris/rev6/rules.mk new file mode 100644 index 0000000000..866d76a3e0 --- /dev/null +++ b/keyboards/keebio/iris/rev6/rules.mk @@ -0,0 +1,27 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +SPLIT_KEYBOARD = yes +ENCODER_ENABLE = yes +RGB_MATRIX_ENABLE = yes +RGB_MATRIX_DRIVER = WS2812 + +LTO_ENABLE = yes From 20f81af98af26d3e15277e402a364a513f986aa6 Mon Sep 17 00:00:00 2001 From: Zach White Date: Mon, 4 Oct 2021 09:26:19 -0700 Subject: [PATCH 186/595] Allow community layouts to be specified in info.json (#14682) * move the community layout detection to python * fixup tests --- Makefile | 31 +------------------------ lib/python/qmk/cli/__init__.py | 1 + lib/python/qmk/cli/generate/rules_mk.py | 2 +- lib/python/qmk/cli/list/layouts.py | 18 ++++++++++++++ 4 files changed, 21 insertions(+), 31 deletions(-) create mode 100644 lib/python/qmk/cli/list/layouts.py diff --git a/Makefile b/Makefile index bb2201e852..5f25eef14b 100644 --- a/Makefile +++ b/Makefile @@ -303,37 +303,8 @@ define PARSE_KEYBOARD KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_3)/keymaps/*/.))) KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_4)/keymaps/*/.))) KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_5)/keymaps/*/.))) - # this might be needed, but in a different form - #KEYMAPS := $$(sort $$(filter-out $$(KEYBOARD_FOLDER_1) $$(KEYBOARD_FOLDER_2) \ - $$(KEYBOARD_FOLDER_3) $$(KEYBOARD_FOLDER_4) $$(KEYBOARD_FOLDER_5), $$(KEYMAPS))) - - KEYBOARD_LAYOUTS := - ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_5)/rules.mk)","") - LAYOUTS := - $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_5)/rules.mk) - KEYBOARD_LAYOUTS := $$(sort $$(LAYOUTS) $$(KEYBOARD_LAYOUTS)) - endif - ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_4)/rules.mk)","") - LAYOUTS := - $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_4)/rules.mk) - KEYBOARD_LAYOUTS := $$(sort $$(LAYOUTS) $$(KEYBOARD_LAYOUTS)) - endif - ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_3)/rules.mk)","") - LAYOUTS := - $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_3)/rules.mk) - KEYBOARD_LAYOUTS := $$(sort $$(LAYOUTS) $$(KEYBOARD_LAYOUTS)) - endif - ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_2)/rules.mk)","") - LAYOUTS := - $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_2)/rules.mk) - KEYBOARD_LAYOUTS := $$(sort $$(LAYOUTS) $$(KEYBOARD_LAYOUTS)) - endif - ifneq ("$$(wildcard $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_1)/rules.mk)","") - LAYOUTS := - $$(eval include $(ROOT_DIR)/keyboards/$$(KEYBOARD_FOLDER_PATH_1)/rules.mk) - KEYBOARD_LAYOUTS := $$(sort $$(LAYOUTS) $$(KEYBOARD_LAYOUTS)) - endif + KEYBOARD_LAYOUTS := $(shell $(QMK_BIN) list-layouts --keyboard $1) LAYOUT_KEYMAPS := $$(foreach LAYOUT,$$(KEYBOARD_LAYOUTS),$$(eval LAYOUT_KEYMAPS += $$(notdir $$(patsubst %/.,%,$$(wildcard $(ROOT_DIR)/layouts/*/$$(LAYOUT)/*/.))))) diff --git a/lib/python/qmk/cli/__init__.py b/lib/python/qmk/cli/__init__.py index f45e33240c..539d03e2fc 100644 --- a/lib/python/qmk/cli/__init__.py +++ b/lib/python/qmk/cli/__init__.py @@ -60,6 +60,7 @@ subcommands = [ 'qmk.cli.lint', 'qmk.cli.list.keyboards', 'qmk.cli.list.keymaps', + 'qmk.cli.list.layouts', 'qmk.cli.kle2json', 'qmk.cli.multibuild', 'qmk.cli.new.keyboard', diff --git a/lib/python/qmk/cli/generate/rules_mk.py b/lib/python/qmk/cli/generate/rules_mk.py index cdf17dfbcb..dcaff29fae 100755 --- a/lib/python/qmk/cli/generate/rules_mk.py +++ b/lib/python/qmk/cli/generate/rules_mk.py @@ -26,7 +26,7 @@ def process_mapping_rule(kb_info_json, rules_key, info_dict): except KeyError: return None - if key_type == 'array': + if key_type in ['array', 'list']: return f'{rules_key} ?= {" ".join(rules_value)}' elif key_type == 'bool': return f'{rules_key} ?= {"on" if rules_value else "off"}' diff --git a/lib/python/qmk/cli/list/layouts.py b/lib/python/qmk/cli/list/layouts.py new file mode 100644 index 0000000000..8e07afeeca --- /dev/null +++ b/lib/python/qmk/cli/list/layouts.py @@ -0,0 +1,18 @@ +"""List the keymaps for a specific keyboard +""" +from milc import cli + +from qmk.decorators import automagic_keyboard +from qmk.keyboard import keyboard_completer, keyboard_folder +from qmk.info import info_json + + +@cli.argument("-kb", "--keyboard", type=keyboard_folder, completer=keyboard_completer, help="Specify keyboard name. Example: monarch") +@cli.subcommand("List the layouts for a specific keyboard") +@automagic_keyboard +def list_layouts(cli): + """List the layouts for a specific keyboard + """ + info_data = info_json(cli.config.list_layouts.keyboard) + for name in sorted(info_data.get('community_layouts', [])): + print(name) From 27d9579fd52b56dd4aa65e14a604ae4eb51386f3 Mon Sep 17 00:00:00 2001 From: Albert Y <76888457+filterpaper@users.noreply.github.com> Date: Tue, 5 Oct 2021 07:21:02 +0800 Subject: [PATCH 187/595] Document examples on intercepting Mod-Tap (#14502) Co-authored-by: Ryan Co-authored-by: Dasky <32983009+daskygit@users.noreply.github.com> Co-authored-by: filterpaper --- docs/mod_tap.md | 74 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 74 insertions(+) diff --git a/docs/mod_tap.md b/docs/mod_tap.md index f4d128482b..b69500f9c9 100644 --- a/docs/mod_tap.md +++ b/docs/mod_tap.md @@ -61,6 +61,80 @@ You may also run into issues when using Remote Desktop Connection on Windows. Be To fix this, open Remote Desktop Connection, click on "Show Options", open the the "Local Resources" tab, and in the keyboard section, change the drop down to "On this Computer". This will fix the issue, and allow the characters to work correctly. It can also be mitigated by increasing [`TAP_CODE_DELAY`](config_options.md#behaviors-that-can-be-configured). +## Intercepting Mod-Taps + +### Changing tap function + +The basic keycode limitation with Mod-Tap can be worked around by intercepting it in `process_record_user`. For example, shifted keycode `KC_DQUO` cannot be used with `MT()` because it is a 16-bit keycode alias of `LSFT(KC_QUOT)`. Modifiers on `KC_DQUO` will be masked by `MT()`. But the following custom code can be used to intercept the "tap" function to manually send `KC_DQUO`: + +```c +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case LCTL_T(KC_DQUO): + if (record->tap.count && record->event.pressed) { + tap_code16(KC_DQUO); // Send KC_DQUO on tap + return false; // Return false to ignore further processing of key + } + break; + } + return true; +} +``` + +### Changing hold function + +Likewise, the same custom code can also be used to intercept the hold function to send custom user key code. The following example uses `LT(0, kc)` (layer-tap key with no practical use because layer 0 is always active) to add cut, copy and paste function to X,C and V keys when they are held down: + +```c +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case LT(0,KC_X): + if (record->tap.count && record->event.pressed) { + return true; // Return true for normal processing of tap keycode + } else if (record->event.pressed) { + tap_code16(C(KC_X)); // Intercept hold function to send Ctrl-X + } + return false; + case LT(0,KC_C): + if (record->tap.count && record->event.pressed) { + return true; // Return true for normal processing of tap keycode + } else if (record->event.pressed) { + tap_code16(C(KC_C)); // Intercept hold function to send Ctrl-C + } + return false; + case LT(0,KC_V): + if (record->tap.count && record->event.pressed) { + return true; // Return true for normal processing of tap keycode + } else if (record->event.pressed) { + tap_code16(C(KC_V)); // Intercept hold function to send Ctrl-V + } + return false; + } + return true; +} +``` + +Enabling `IGNORE_MOD_TAP_INTERRUPT` is recommended when using Mod-Tap on alphanumeric keys to avoid hold function taking precendence when the next key is pressed quickly. See [Ignore Mod Tap Interrupt](tap_hold.md#ignore-mod-tap-interrupt) for more details. + +### Changing both tap and hold + +This last example implements custom tap and hold function with `LT(0,KC_NO)` to create a single copy-on-tap, paste-on-hold key: + +```c +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case LT(0,KC_NO): + if (record->tap.count && record->event.pressed) { + tap_code16(C(KC_C)); // Intercept tap function to send Ctrl-C + } else if (record->event.pressed) { + tap_code16(C(KC_V)); // Intercept hold function to send Ctrl-V + } + return false; + } + return true; +} +``` + ## Other Resources See the [Tap-Hold Configuration Options](tap_hold.md) for additional flags that tweak Mod-Tap behavior. From b441efbdf64d30031854c68a9c76376b38339b1e Mon Sep 17 00:00:00 2001 From: moyi4681 Date: Tue, 5 Oct 2021 09:16:47 +0800 Subject: [PATCH 188/595] [Keyboard] add dztech duo_s keyboard (#14625) Co-authored-by: Drashna Jaelre --- keyboards/dztech/duo_s/config.h | 64 +++++++++++++++++++ keyboards/dztech/duo_s/duo_s.c | 16 +++++ keyboards/dztech/duo_s/duo_s.h | 33 ++++++++++ keyboards/dztech/duo_s/info.json | 10 +++ .../dztech/duo_s/keymaps/default/keymap.c | 50 +++++++++++++++ keyboards/dztech/duo_s/keymaps/via/keymap.c | 50 +++++++++++++++ keyboards/dztech/duo_s/keymaps/via/rules.mk | 2 + keyboards/dztech/duo_s/readme.md | 21 ++++++ keyboards/dztech/duo_s/rules.mk | 23 +++++++ 9 files changed, 269 insertions(+) create mode 100644 keyboards/dztech/duo_s/config.h create mode 100644 keyboards/dztech/duo_s/duo_s.c create mode 100644 keyboards/dztech/duo_s/duo_s.h create mode 100644 keyboards/dztech/duo_s/info.json create mode 100644 keyboards/dztech/duo_s/keymaps/default/keymap.c create mode 100644 keyboards/dztech/duo_s/keymaps/via/keymap.c create mode 100644 keyboards/dztech/duo_s/keymaps/via/rules.mk create mode 100644 keyboards/dztech/duo_s/readme.md create mode 100644 keyboards/dztech/duo_s/rules.mk diff --git a/keyboards/dztech/duo_s/config.h b/keyboards/dztech/duo_s/config.h new file mode 100644 index 0000000000..a108fa665e --- /dev/null +++ b/keyboards/dztech/duo_s/config.h @@ -0,0 +1,64 @@ +/* Copyright 2021 DZTECH + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x445A +#define PRODUCT_ID 0X1012 +#define DEVICE_VER 0x0001 +#define MANUFACTURER DZTECH +#define PRODUCT DUO-S + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 +#define MATRIX_ROW_PINS { A15, B3, B4, B5, B11 } +#define MATRIX_COL_PINS { B12, B13, B14, A8, B9, C13, C14, C15, A1, A2, A3, A4, A5, A6, A7 } +#define UNUSED_PINS +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +#define RGB_DI_PIN B15 +#ifdef RGB_DI_PIN +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE +#define RGBLIGHT_DEFAULT_MODE (RGBLIGHT_EFFECT_RAINBOW_MOOD + 6) +#define RGBLIGHT_DEFAULT_SPD 15 +#define RGBLED_NUM 16 +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 10 +#define RGBLIGHT_VAL_STEP 10 +#define RGBLIGHT_SLEEP +#endif +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +#define VIA_EEPROM_LAYOUT_OPTIONS_SIZE 2 diff --git a/keyboards/dztech/duo_s/duo_s.c b/keyboards/dztech/duo_s/duo_s.c new file mode 100644 index 0000000000..ca64b1ff56 --- /dev/null +++ b/keyboards/dztech/duo_s/duo_s.c @@ -0,0 +1,16 @@ +/* Copyright 2021 DZTECH + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "duo_s.h" diff --git a/keyboards/dztech/duo_s/duo_s.h b/keyboards/dztech/duo_s/duo_s.h new file mode 100644 index 0000000000..772a5a25ca --- /dev/null +++ b/keyboards/dztech/duo_s/duo_s.h @@ -0,0 +1,33 @@ +/* Copyright 2021 DZTECH + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" + +#define LAYOUT_65_ansi_blocker( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K213, K214, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K314, \ + K400, K401, K402, K405, K408, K410, K411, K413, K414 \ +) \ +{ \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, KC_NO, K213, K214 }, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, K314 }, \ + { K400, K401, K402, KC_NO, KC_NO, K405, KC_NO, KC_NO, K408, KC_NO, K410, K411, KC_NO, K413, K414 } \ +} diff --git a/keyboards/dztech/duo_s/info.json b/keyboards/dztech/duo_s/info.json new file mode 100644 index 0000000000..6adac04ae6 --- /dev/null +++ b/keyboards/dztech/duo_s/info.json @@ -0,0 +1,10 @@ +{ + "keyboard_name": "duo_s", + "url": "", + "maintainer": "moyi4681", + "layouts": { + "LAYOUT_65_ansi_blocker": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] + } + } +} diff --git a/keyboards/dztech/duo_s/keymaps/default/keymap.c b/keyboards/dztech/duo_s/keymaps/default/keymap.c new file mode 100644 index 0000000000..9d7c61d650 --- /dev/null +++ b/keyboards/dztech/duo_s/keymaps/default/keymap.c @@ -0,0 +1,50 @@ +/* Copyright 2021 DZTECH + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_65_ansi_blocker( /* Base */ + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_END, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_BSLS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT_65_ansi_blocker( /* FN */ + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, BL_INC, + KC_CAPS, , _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_DEC, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_MOD, _______, + _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END + ), + + [2] = LAYOUT_65_ansi_blocker( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [3] = LAYOUT_65_ansi_blocker( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/dztech/duo_s/keymaps/via/keymap.c b/keyboards/dztech/duo_s/keymaps/via/keymap.c new file mode 100644 index 0000000000..667112dea7 --- /dev/null +++ b/keyboards/dztech/duo_s/keymaps/via/keymap.c @@ -0,0 +1,50 @@ +/* Copyright 2021 DZTECH + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_65_ansi_blocker( /* Base */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_END, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT_65_ansi_blocker( /* FN */ + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, BL_INC, + KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, BL_DEC, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGUP, RGB_MOD, + _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END + ), + + [2] = LAYOUT_65_ansi_blocker( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [3] = LAYOUT_65_ansi_blocker( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/dztech/duo_s/keymaps/via/rules.mk b/keyboards/dztech/duo_s/keymaps/via/rules.mk new file mode 100644 index 0000000000..36b7ba9cbc --- /dev/null +++ b/keyboards/dztech/duo_s/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/dztech/duo_s/readme.md b/keyboards/dztech/duo_s/readme.md new file mode 100644 index 0000000000..7346663854 --- /dev/null +++ b/keyboards/dztech/duo_s/readme.md @@ -0,0 +1,21 @@ +# DUO-S + +A customizable 65% HOTSWAP keyboard. + +* Keyboard Maintainer: [moyi4681](https://github.com/moyi4681) +* Hardware Supported: moyi4681 +* Hardware Availability: [moyi4681](https://github.com/moyi4681) + +Make example for this keyboard (after setting up your build environment): + + make dztech/duo_s:default + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix +* **Physical reset button**: hold the button on the back of the PCB during plug in cable. +* **Keycode in layout**: Press the key mapped to `RESET` if it is available + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/dztech/duo_s/rules.mk b/keyboards/dztech/duo_s/rules.mk new file mode 100644 index 0000000000..843d46f37e --- /dev/null +++ b/keyboards/dztech/duo_s/rules.mk @@ -0,0 +1,23 @@ +# MCU name +MCU = STM32F303 + +# Bootloader selection +BOOTLOADER = stm32-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output + +LAYOUTS = 65_ansi_blocker \ No newline at end of file From 85ba5074825f608501e14594764cdc3c82a08c01 Mon Sep 17 00:00:00 2001 From: Daniel Cormier Date: Mon, 4 Oct 2021 21:35:48 -0400 Subject: [PATCH 189/595] [Keyboard] Added DC MC 001 (#14661) --- keyboards/handwired/dc/mc/001/001.c | 17 ++++ keyboards/handwired/dc/mc/001/001.h | 33 ++++++++ keyboards/handwired/dc/mc/001/config.h | 83 +++++++++++++++++++ keyboards/handwired/dc/mc/001/info.json | 16 ++++ .../dc/mc/001/keymaps/default/keymap.c | 31 +++++++ .../dc/mc/001/keymaps/default/readme.md | 1 + keyboards/handwired/dc/mc/001/readme.md | 24 ++++++ keyboards/handwired/dc/mc/001/rules.mk | 22 +++++ 8 files changed, 227 insertions(+) create mode 100644 keyboards/handwired/dc/mc/001/001.c create mode 100644 keyboards/handwired/dc/mc/001/001.h create mode 100644 keyboards/handwired/dc/mc/001/config.h create mode 100644 keyboards/handwired/dc/mc/001/info.json create mode 100644 keyboards/handwired/dc/mc/001/keymaps/default/keymap.c create mode 100644 keyboards/handwired/dc/mc/001/keymaps/default/readme.md create mode 100644 keyboards/handwired/dc/mc/001/readme.md create mode 100644 keyboards/handwired/dc/mc/001/rules.mk diff --git a/keyboards/handwired/dc/mc/001/001.c b/keyboards/handwired/dc/mc/001/001.c new file mode 100644 index 0000000000..4745469fd6 --- /dev/null +++ b/keyboards/handwired/dc/mc/001/001.c @@ -0,0 +1,17 @@ +/* Copyright 2021 Daniel Cormier + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "001.h" diff --git a/keyboards/handwired/dc/mc/001/001.h b/keyboards/handwired/dc/mc/001/001.h new file mode 100644 index 0000000000..317655162e --- /dev/null +++ b/keyboards/handwired/dc/mc/001/001.h @@ -0,0 +1,33 @@ +/* Copyright 2021 Daniel Cormier + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + k00, k01, k02, k03, k04 \ +) { \ + { k00, k01, k02, k03, k04 } \ +} diff --git a/keyboards/handwired/dc/mc/001/config.h b/keyboards/handwired/dc/mc/001/config.h new file mode 100644 index 0000000000..4c687ae7fa --- /dev/null +++ b/keyboards/handwired/dc/mc/001/config.h @@ -0,0 +1,83 @@ +/* +Copyright 2021 Daniel Cormier + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4443 // 'D' 'C' +#define PRODUCT_ID 0x4D43 // 'M' 'C' +#define DEVICE_VER 0x0001 +#define MANUFACTURER Daniel Cormier +#define PRODUCT DC MC 001 + +/* + BUTTON_MUTE = _BV(4), + BUTTON_STOP = _BV(0), + BUTTON_TRACK_PREVIOUS = _BV(1), + BUTTON_TRACK_NEXT = _BV(2), + BUTTON_PLAY_PAUSE = _BV(3), +*/ +#define DIRECT_PINS \ + { \ + { B4, B0, B1, B2, B3 } \ + } +#define UNUSED_PINS + +/* + RE_CHANNEL_A = _BV(6), + RE_CHANNEL_B = _BV(5), +*/ +#define ENCODERS_PAD_A \ + { B6 } +#define ENCODERS_PAD_B \ + { B5 } +#define ENCODER_RESOLUTION 4 + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +// All the keys just need 5ms of debounce, but the mute button on the rotary +// encoderneeds much more (50ms). +#define DEBOUNCE 50 + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +#define NO_ACTION_LAYER +#define NO_ACTION_TAPPING +#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +// The (default) Stop key +// Doesn't work, though. Maybe becuase of the bootloader that's in use? +#define BOOTMAGIC_LITE_ROW 0 +#define BOOTMAGIC_LITE_COLUMN 1 + +#define USB_MAX_POWER_CONSUMPTION 100 diff --git a/keyboards/handwired/dc/mc/001/info.json b/keyboards/handwired/dc/mc/001/info.json new file mode 100644 index 0000000000..d9562f660e --- /dev/null +++ b/keyboards/handwired/dc/mc/001/info.json @@ -0,0 +1,16 @@ +{ + "keyboard_name": "Daniel Cormier's Media Controller (v1)", + "url": "https://imgur.com/a/PM9lQ", + "maintainer": "Daniel Cormier (Twitter: @danielcormier)", + "layouts": { + "LAYOUT": { + "layout": [ + {"label": "Mute", "x": 0, "y": 0}, + {"label": "Stop", "x": 1, "y": 0}, + {"label": "Previous", "x": 2, "y": 0}, + {"label": "Next", "x": 3, "y": 0}, + {"label": "Play/Pause", "x": 4, "y": 0} + ] + } + } +} diff --git a/keyboards/handwired/dc/mc/001/keymaps/default/keymap.c b/keyboards/handwired/dc/mc/001/keymaps/default/keymap.c new file mode 100644 index 0000000000..6f6ca52d74 --- /dev/null +++ b/keyboards/handwired/dc/mc/001/keymaps/default/keymap.c @@ -0,0 +1,31 @@ +/* Copyright 2021 Daniel Cormier + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + LAYOUT(KC_AUDIO_MUTE, KC_MEDIA_STOP, KC_MEDIA_PREV_TRACK, KC_MEDIA_NEXT_TRACK, KC_MEDIA_PLAY_PAUSE), +}; + +bool encoder_update_user(uint8_t index, bool clockwise) { + if (index == 0) { + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } + return true; +} diff --git a/keyboards/handwired/dc/mc/001/keymaps/default/readme.md b/keyboards/handwired/dc/mc/001/keymaps/default/readme.md new file mode 100644 index 0000000000..e207a7b80d --- /dev/null +++ b/keyboards/handwired/dc/mc/001/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for DC MC 001 diff --git a/keyboards/handwired/dc/mc/001/readme.md b/keyboards/handwired/dc/mc/001/readme.md new file mode 100644 index 0000000000..9a20ac339b --- /dev/null +++ b/keyboards/handwired/dc/mc/001/readme.md @@ -0,0 +1,24 @@ +# handwired/dc/mc/001 + +[![handwired/dc/mc/001](https://i.imgur.com/bv2g32U.jpg) +*A freestanding media controller*](https://imgur.com/a/PM9lQ) + +* Keyboard Maintainer: [Daniel Cormier](https://github.com/dcormier) +* Hardware Supported: Adafruit Atmega32u4 Breakout Board +* Hardware Availability: https://www.adafruit.com/product/296 + +Make example for this keyboard (after setting up your build environment): + + make handwired/dc/mc/001:default + +Flashing example for this keyboard: + + make handwired/dc/mc/001:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader: + +* **Physical reset button**: Briefly press the button on the top of the PCB diff --git a/keyboards/handwired/dc/mc/001/rules.mk b/keyboards/handwired/dc/mc/001/rules.mk new file mode 100644 index 0000000000..3ec538b93a --- /dev/null +++ b/keyboards/handwired/dc/mc/001/rules.mk @@ -0,0 +1,22 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = caterina + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +EXTRAKEY_ENABLE = yes # Audio control and System control +ENCODER_ENABLE = yes # Using a rotary encoder for volume control +MOUSEKEY_ENABLE = no # Mouse keys +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output From 46fe8ab4e28182418a639b92490d6c5ca30897ef Mon Sep 17 00:00:00 2001 From: Danny Date: Mon, 4 Oct 2021 23:38:24 -0400 Subject: [PATCH 190/595] [Keyboard] Update Iris default keymap (#14701) --- keyboards/keebio/iris/keymaps/default/keymap.c | 14 +++++++------- keyboards/keebio/iris/keymaps/via/keymap.c | 2 +- 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/keyboards/keebio/iris/keymaps/default/keymap.c b/keyboards/keebio/iris/keymaps/default/keymap.c index 5fda9fb917..e3cd532694 100644 --- a/keyboards/keebio/iris/keymaps/default/keymap.c +++ b/keyboards/keebio/iris/keymaps/default/keymap.c @@ -19,11 +19,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //┌────────┬────────┬────────┬────────┬────────┬────────┐ ┌────────┬────────┬────────┬────────┬────────┬────────┐ KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, //├────────┼────────┼────────┼────────┼────────┼────────┤ ├────────┼────────┼────────┼────────┼────────┼────────┤ - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, //├────────┼────────┼────────┼────────┼────────┼────────┤ ├────────┼────────┼────────┼────────┼────────┼────────┤ KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐ ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤ - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_GRV, KC_DEL, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_HOME, KC_END, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, //└────────┴────────┴────────┴───┬────┴───┬────┴───┬────┴───┬────┘ └───┬────┴───┬────┴───┬────┴───┬────┴────────┴────────┴────────┘ KC_LGUI, LOWER, KC_ENT, KC_SPC, RAISE, KC_RALT // └────────┴────────┴────────┘ └────────┴────────┴────────┘ @@ -31,13 +31,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_LOWER] = LAYOUT( //┌────────┬────────┬────────┬────────┬────────┬────────┐ ┌────────┬────────┬────────┬────────┬────────┬────────┐ - KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_PGUP, + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, //├────────┼────────┼────────┼────────┼────────┼────────┤ ├────────┼────────┼────────┼────────┼────────┼────────┤ - RESET, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_PGDN, + RESET, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, //├────────┼────────┼────────┼────────┼────────┼────────┤ ├────────┼────────┼────────┼────────┼────────┼────────┤ - KC_DEL, _______, KC_LEFT, KC_RGHT, KC_UP, KC_LBRC, KC_RBRC, KC_P4, KC_P5, KC_P6, KC_PLUS, KC_HOME, + KC_DEL, _______, KC_LEFT, KC_RGHT, KC_UP, KC_LBRC, KC_RBRC, KC_P4, KC_P5, KC_P6, KC_PLUS, KC_PIPE, //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐ ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤ - BL_STEP, _______, _______, _______, KC_DOWN, KC_LCBR, KC_LPRN, KC_RPRN, KC_RCBR, KC_P1, KC_P2, KC_P3, KC_MINS, KC_END, + BL_STEP, _______, _______, _______, KC_DOWN, KC_LCBR, KC_LPRN, KC_RPRN, KC_RCBR, KC_P1, KC_P2, KC_P3, KC_MINS, _______, //└────────┴────────┴────────┴───┬────┴───┬────┴───┬────┴───┬────┘ └───┬────┴───┬────┴───┬────┴───┬────┴────────┴────────┴────────┘ _______, _______, KC_DEL, KC_DEL, _______, KC_P0 // └────────┴────────┴────────┘ └────────┴────────┴────────┘ @@ -49,7 +49,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //├────────┼────────┼────────┼────────┼────────┼────────┤ ├────────┼────────┼────────┼────────┼────────┼────────┤ RGB_TOG, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, //├────────┼────────┼────────┼────────┼────────┼────────┤ ├────────┼────────┼────────┼────────┼────────┼────────┤ - RGB_MOD, KC_MPRV, KC_MNXT, KC_VOLU, KC_PGUP, KC_UNDS, KC_EQL, KC_HOME, RGB_HUI, RGB_SAI, RGB_VAI, _______, + RGB_MOD, KC_MPRV, KC_MNXT, KC_VOLU, KC_PGUP, KC_UNDS, KC_EQL, KC_HOME, RGB_HUI, RGB_SAI, RGB_VAI, KC_BSLS, //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐ ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤ KC_MUTE, KC_MSTP, KC_MPLY, KC_VOLD, KC_PGDN, KC_MINS, KC_LPRN, _______, KC_PLUS, KC_END, RGB_HUD, RGB_SAD, RGB_VAD, _______, //└────────┴────────┴────────┴───┬────┴───┬────┴───┬────┴───┬────┘ └───┬────┴───┬────┴───┬────┴───┬────┴────────┴────────┴────────┘ diff --git a/keyboards/keebio/iris/keymaps/via/keymap.c b/keyboards/keebio/iris/keymaps/via/keymap.c index 2ada98d6da..f6183f1f7d 100644 --- a/keyboards/keebio/iris/keymaps/via/keymap.c +++ b/keyboards/keebio/iris/keymaps/via/keymap.c @@ -19,7 +19,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //├────────┼────────┼────────┼────────┼────────┼────────┼────────┐ ┌────────┼────────┼────────┼────────┼────────┼────────┼────────┤ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_HOME, KC_END, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, //└────────┴────────┴────────┴───┬────┴───┬────┴───┬────┴───┬────┘ └───┬────┴───┬────┴───┬────┴───┬────┴────────┴────────┴────────┘ - KC_LGUI, FN_MO13, KC_ENT, KC_SPC, FN_MO23, KC_LALT + KC_LGUI, FN_MO13, KC_ENT, KC_SPC, FN_MO23, KC_RALT // └────────┴────────┴────────┘ └────────┴────────┴────────┘ ), From 7a49e5d2078e8e1044f11d0d7d2a67e82867024a Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Tue, 5 Oct 2021 20:29:52 +1100 Subject: [PATCH 191/595] Add clarification for licensing. (#14704) * Add clarification for licensing. * Errr, v2. --- docs/pr_checklist.md | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/docs/pr_checklist.md b/docs/pr_checklist.md index c8e27d5658..cac3312e0b 100644 --- a/docs/pr_checklist.md +++ b/docs/pr_checklist.md @@ -15,7 +15,9 @@ If there are any inconsistencies with these recommendations, you're best off [cr - a board designer naming their keyboard with uppercase letters is not enough justification - valid license headers on all `*.c` and `*.h` source files - GPL2/GPL3 recommended for consistency + - an example GPL2+ license header may be copied and modified from the bottom of this document - other licenses are permitted, however they must be GPL-compatible and must allow for redistribution. Using a different license will almost certainly delay a PR getting merged. + - missing license headers will prevent PR merge due to ambiguity with license compatibility - QMK Codebase "best practices" followed - this is not an exhaustive list, and will likely get amended as time goes by - `#pragma once` instead of `#ifndef` include guards in header files @@ -137,3 +139,23 @@ Thanks for contributing! In general, we want to see two (or more) approvals that are meaningful (e.g. that have inspected code) before a PR will be considered for merge. These reviews are not limited to collaborators -- any community member willing to put in the time is welcomed (and encouraged). The only difference is that your checkmark won't be green, and that's fine! Additionally, PR reviews are something that is done in our free time. We are not paid nor compensated for the time we spend reviewing, as it is a labor of love. As such, this means that it can take time for us to get to your Pull Request. Things like family, or life can get in the way of us getting to PRs, and burnout is a serious concern. The QMK firmware repository averages 200 PRs opened and 200 PRs merged every month, so please have patience. + +## Example GPLv2 Header + +``` +/* Copyright 2021 Your Name (@yourgithub) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +``` From 4676a14596f8ad4065acd2e18c892e0ee61ee346 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Wed, 6 Oct 2021 06:46:36 +1100 Subject: [PATCH 192/595] More PR checklist updates (#14705) * Wording, clarification. * Apply suggestions from code review Co-authored-by: Mikkel Jeppesen <2756925+Duckle29@users.noreply.github.com> Co-authored-by: Mikkel Jeppesen <2756925+Duckle29@users.noreply.github.com> --- docs/pr_checklist.md | 34 +++++++++++++++++++++------------- 1 file changed, 21 insertions(+), 13 deletions(-) diff --git a/docs/pr_checklist.md b/docs/pr_checklist.md index cac3312e0b..817ed22d41 100644 --- a/docs/pr_checklist.md +++ b/docs/pr_checklist.md @@ -4,14 +4,14 @@ This is a non-exhaustive checklist of what the QMK Collaborators will be checkin If there are any inconsistencies with these recommendations, you're best off [creating an issue](https://github.com/qmk/qmk_firmware/issues/new) against this document, or getting in touch with a QMK Collaborator on [Discord](https://discord.gg/Uq7gcHh). -## General PRs +## Requirements for all PRs - PR should be submitted using a non-`master` branch on the source repository - this does not mean you target a different branch for your PR, rather that you're not working out of your own master branch - if submitter _does_ use their own `master` branch, they'll be given a link to the ["how to git"](https://docs.qmk.fm/#/newbs_git_using_your_master_branch) page after merging -- (end of this document will contain the contents of the message) - newly-added directories and filenames must be lowercase - - this rule may be relaxed if upstream sources originally had uppercase characters (e.g. ChibiOS, or imported files from other repositories etc.) - - if there is enough justification (i.e. consistency with existing core files etc.) this can be relaxed + - this rule may be relaxed if upstream sources originally had uppercase characters (e.g. LUFA, ChibiOS, or imported files from other repositories etc.) + - if there is valid justification (i.e. consistency with existing core files etc.) this can be relaxed - a board designer naming their keyboard with uppercase letters is not enough justification - valid license headers on all `*.c` and `*.h` source files - GPL2/GPL3 recommended for consistency @@ -21,7 +21,7 @@ If there are any inconsistencies with these recommendations, you're best off [cr - QMK Codebase "best practices" followed - this is not an exhaustive list, and will likely get amended as time goes by - `#pragma once` instead of `#ifndef` include guards in header files - - no "old-school" GPIO/I2C/SPI functions used -- must use QMK abstractions unless justifiable (and laziness is not valid justification) + - no "old-school" or other low-level GPIO/I2C/SPI functions may be used -- must use QMK abstractions unless justifiable (and laziness is not valid justification) - timing abstractions should be followed too: - `wait_ms()` instead of `_delay_ms()` (remove `#include ` too) - `timer_read()` and `timer_read32()` etc. -- see [timer.h](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/common/timer.h) for the timing APIs @@ -30,7 +30,7 @@ If there are any inconsistencies with these recommendations, you're best off [cr - discuss it with QMK Collaborators on Discord - refactor it as a separate core change - remove your specific copy in your board -- rebase and fix all merge conflicts before opening the PR (in case you need help or advice, reach out to QMK Collaborators on Discord) +- fix all merge conflicts before opening the PR (in case you need help or advice, reach out to QMK Collaborators on Discord) ## Keymap PRs @@ -50,11 +50,13 @@ https://github.com/qmk/qmk_firmware/pulls?q=is%3Apr+is%3Aclosed+label%3Akeyboard - valid maintainer - displays correctly in Configurator (press Ctrl+Shift+I to preview local file, turn on fast input to verify ordering) - `readme.md` - - standard template should be present - - flash command has `:flash` at end + - standard template should be present -- [link to template](https://github.com/qmk/qmk_firmware/blob/master/data/templates/avr/readme.md) + - flash command is present, and has `:flash` at end - valid hardware availability link (unless handwired) -- private groupbuys are okay, but one-off prototypes will be questioned. If open-source, a link to files should be provided. - clear instructions on how to reset the board into bootloader mode - a picture about the keyboard and preferably about the PCB, too + - images are not to be placed in the `qmk_firmware` repository + - images should be uploaded to an external image hosting service, such as [imgur](https://imgur.com/). - `rules.mk` - removed `MIDI_ENABLE`, `FAUXCLICKY_ENABLE` and `HD44780_ENABLE` - modified `# Enable Bluetooth with the Adafruit EZ-Key HID` -> `# Enable Bluetooth` @@ -71,20 +73,20 @@ https://github.com/qmk/qmk_firmware/pulls?q=is%3Apr+is%3Aclosed+label%3Akeyboard - initialisation code for the matrix and critical devices - mirroring existing functionality of a commercial board (like custom keycodes and special animations etc.) should be handled through non-`default` keymaps - Vial-related files or changes will not be accepted, as they are not used by QMK firmware (no Vial-specific core code has been submitted or merged) -- `keyboard.c` +- `.c` - empty `xxxx_xxxx_kb()` or other weak-defined default implemented functions removed - commented-out functions removed too - `matrix_init_board()` etc. migrated to `keyboard_pre_init_kb()`, see: [keyboard_pre_init*](https://docs.qmk.fm/#/custom_quantum_functions?id=keyboard_pre_init_-function-documentation) - prefer `CUSTOM_MATRIX = lite` if custom matrix used, allows for standard debounce, see [custom matrix 'lite'](https://docs.qmk.fm/#/custom_matrix?id=lite) - prefer LED indicator [Configuration Options](https://docs.qmk.fm/#/feature_led_indicators?id=configuration-options) to custom `led_update_*()` implementations where possible -- `keyboard.h` +- `.h` - `#include "quantum.h"` appears at the top - `LAYOUT` macros should use standard definitions if applicable - use the Community Layout macro names where they apply (preferred above `LAYOUT`/`LAYOUT_all`) - keymap `config.h` - no duplication of `rules.mk` or `config.h` from keyboard - `keymaps/default/keymap.c` - - `QMKBEST`/`QMKURL` removed (sheesh) + - `QMKBEST`/`QMKURL` removed - if using `MO(_LOWER)` and `MO(_RAISE)` keycodes or equivalent, and the keymap has an adjust layer when holding both keys -- if the keymap has no "direct-to-adjust" keycode (such as `MO(_ADJUST)`) then you should prefer to write... ``` layer_state_t layer_state_set_user(layer_state_t state) { @@ -100,7 +102,6 @@ https://github.com/qmk/qmk_firmware/pulls?q=is%3Apr+is%3Aclosed+label%3Akeyboard - submitters can also have a "manufacturer-matching" keymap that mirrors existing functionality of the commercial product, if porting an existing board - Do not include VIA json files in the PR. These do not belong in the QMK repository as they are not used by QMK firmware -- they belong in the [VIA Keyboard Repo](https://github.com/the-via/keyboards) - Also, specific to ChibiOS: - **strong** preference to using existing ChibiOS board definitions. - a lot of the time, an equivalent Nucleo board can be used with a different flash size or slightly different model in the same family @@ -114,7 +115,7 @@ Also, specific to ChibiOS: ## Core PRs - must now target `develop` branch, which will subsequently be merged back to `master` on the breaking changes timeline -- other notes TBD +- other requirements are at the discretion of QMK collaborators - core is a lot more subjective given the breadth of posted changes --- @@ -136,7 +137,7 @@ Thanks for contributing! ## Review Process -In general, we want to see two (or more) approvals that are meaningful (e.g. that have inspected code) before a PR will be considered for merge. These reviews are not limited to collaborators -- any community member willing to put in the time is welcomed (and encouraged). The only difference is that your checkmark won't be green, and that's fine! +In general, we want to see two (or more) approvals that are meaningful (e.g. that have inspected code) before a PR will be considered for merge. These reviews are not limited to collaborators -- any community member willing to put in the time is welcomed (and encouraged). The only difference is that your checkmark won't be green, and that's fine! Additionally, PR reviews are something that is done in our free time. We are not paid nor compensated for the time we spend reviewing, as it is a labor of love. As such, this means that it can take time for us to get to your Pull Request. Things like family, or life can get in the way of us getting to PRs, and burnout is a serious concern. The QMK firmware repository averages 200 PRs opened and 200 PRs merged every month, so please have patience. @@ -159,3 +160,10 @@ Additionally, PR reviews are something that is done in our free time. We are not * along with this program. If not, see . */ ``` + +Or, optionally, using [SPDX identifier](https://spdx.org/licenses/) instead: + +``` +// Copyright 2021 Your Name (@yourgithub) +// SPDX-License-Identifier: GPL-2.0-or-later +``` From aabc0cc8ad44448ae56604e9edd5b40a8aaa3a0b Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Tue, 5 Oct 2021 23:30:09 +0000 Subject: [PATCH 193/595] Durgod DGK6X Galaxy: correct Configurator layout (#14714) Top row had a y-value of 1, which placed it behind the number row when rendered. --- keyboards/durgod/dgk6x/galaxy/info.json | 32 ++++++++++++------------- 1 file changed, 16 insertions(+), 16 deletions(-) diff --git a/keyboards/durgod/dgk6x/galaxy/info.json b/keyboards/durgod/dgk6x/galaxy/info.json index d4ec3bd655..6fc8959d0b 100644 --- a/keyboards/durgod/dgk6x/galaxy/info.json +++ b/keyboards/durgod/dgk6x/galaxy/info.json @@ -5,22 +5,22 @@ "layouts": { "LAYOUT_75_ansi": { "layout": [ - { "label": "Esc", "x": 0, "y": 1 }, - { "label": "F1", "x": 1, "y": 1 }, - { "label": "F2", "x": 2, "y": 1 }, - { "label": "F3", "x": 3, "y": 1 }, - { "label": "F4", "x": 4, "y": 1 }, - { "label": "F5", "x": 5, "y": 1 }, - { "label": "F6", "x": 6, "y": 1 }, - { "label": "F7", "x": 7, "y": 1 }, - { "label": "F8", "x": 8, "y": 1 }, - { "label": "F9", "x": 9, "y": 1 }, - { "label": "F10", "x": 10, "y": 1 }, - { "label": "F11", "x": 11, "y": 1 }, - { "label": "F12", "x": 12, "y": 1 }, - { "label": "PrintScreen", "x": 13, "y": 1 }, - { "label": "ScrollLock", "x": 14, "y": 1 }, - { "label": "Delete", "x": 15, "y": 1 }, + { "label": "Esc", "x": 0, "y": 0 }, + { "label": "F1", "x": 1, "y": 0 }, + { "label": "F2", "x": 2, "y": 0 }, + { "label": "F3", "x": 3, "y": 0 }, + { "label": "F4", "x": 4, "y": 0 }, + { "label": "F5", "x": 5, "y": 0 }, + { "label": "F6", "x": 6, "y": 0 }, + { "label": "F7", "x": 7, "y": 0 }, + { "label": "F8", "x": 8, "y": 0 }, + { "label": "F9", "x": 9, "y": 0 }, + { "label": "F10", "x": 10, "y": 0 }, + { "label": "F11", "x": 11, "y": 0 }, + { "label": "F12", "x": 12, "y": 0 }, + { "label": "PrintScreen", "x": 13, "y": 0 }, + { "label": "ScrollLock", "x": 14, "y": 0 }, + { "label": "Delete", "x": 15, "y": 0 }, { "label": "~", "x": 0, "y": 1 }, { "label": "!", "x": 1, "y": 1 }, From e762db44bae46c631186c807a9c10fd8e4684535 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Tue, 5 Oct 2021 23:37:42 +0000 Subject: [PATCH 194/595] 0xc7/61key touch-up (#14712) * correct Configurator layout data * rename LAYOUT to LAYOUT_60_ansi * correct info.json maintainer field Use the maintainer's GitHub username. * correct the compiling/flashing instructions Keyboard value is relative to `qmk_firmware/keyboards/`. --- keyboards/0xc7/61key/61key.h | 2 +- keyboards/0xc7/61key/info.json | 17 ++++++++++------- keyboards/0xc7/61key/keymaps/default/keymap.c | 4 ++-- keyboards/0xc7/61key/keymaps/via/keymap.c | 8 ++++---- keyboards/0xc7/61key/readme.md | 4 ++-- 5 files changed, 19 insertions(+), 16 deletions(-) diff --git a/keyboards/0xc7/61key/61key.h b/keyboards/0xc7/61key/61key.h index ba05a3cbb0..8767b2df1d 100644 --- a/keyboards/0xc7/61key/61key.h +++ b/keyboards/0xc7/61key/61key.h @@ -28,7 +28,7 @@ * The second converts the arguments into a two-dimensional array which * represents the switch matrix. */ -#define LAYOUT( \ +#define LAYOUT_60_ansi( \ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ diff --git a/keyboards/0xc7/61key/info.json b/keyboards/0xc7/61key/info.json index de24ff668c..02070e87c9 100644 --- a/keyboards/0xc7/61key/info.json +++ b/keyboards/0xc7/61key/info.json @@ -1,9 +1,12 @@ { "keyboard_name": "61Key", "url": "", - "maintainer": "0xC7", + "maintainer": "RealEmanGaming", + "layout_aliases": { + "LAYOUT": "LAYOUT_60_ansi" + }, "layouts": { - "LAYOUT": { + "LAYOUT_60_ansi": { "layout": [ {"x": 0, "y": 0}, {"x": 1, "y": 0}, @@ -18,7 +21,7 @@ {"x": 10, "y": 0}, {"x": 11, "y": 0}, {"x": 12, "y": 0}, - {"x": 13, "y": 0}, + {"x": 13, "y": 0, "w": 2}, {"x": 0, "y": 1, "w": 1.5}, {"x": 1.5, "y": 1}, @@ -47,10 +50,9 @@ {"x": 9.75, "y": 2}, {"x": 10.75, "y": 2}, {"x": 11.75, "y": 2}, - {"x": 12.75, "y": 2, "w": 1.25}, + {"x": 12.75, "y": 2, "w": 2.25}, - {"x": 0, "y": 3, "w": 1.25}, - {"x": 1.25, "y": 3}, + {"x": 0, "y": 3, "w": 2.25}, {"x": 2.25, "y": 3}, {"x": 3.25, "y": 3}, {"x": 4.25, "y": 3}, @@ -60,7 +62,8 @@ {"x": 8.25, "y": 3}, {"x": 9.25, "y": 3}, {"x": 10.25, "y": 3}, - {"x": 11.25, "y": 3, "w": 1.75}, + {"x": 11.25, "y": 3}, + {"x": 12.25, "y": 3, "w": 2.75}, {"x": 0, "y": 4, "w": 1.25}, {"x": 1.25, "y": 4, "w": 1.25}, diff --git a/keyboards/0xc7/61key/keymaps/default/keymap.c b/keyboards/0xc7/61key/keymaps/default/keymap.c index 62d0d31a69..a0a2d15df3 100644 --- a/keyboards/0xc7/61key/keymaps/default/keymap.c +++ b/keyboards/0xc7/61key/keymaps/default/keymap.c @@ -17,14 +17,14 @@ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( + [0] = LAYOUT_60_ansi( KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_APP, KC_RCTL ), - [1] = LAYOUT( + [1] = LAYOUT_60_ansi( KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, diff --git a/keyboards/0xc7/61key/keymaps/via/keymap.c b/keyboards/0xc7/61key/keymaps/via/keymap.c index 3b2d1b451d..564d19fed2 100644 --- a/keyboards/0xc7/61key/keymaps/via/keymap.c +++ b/keyboards/0xc7/61key/keymaps/via/keymap.c @@ -17,28 +17,28 @@ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( + [0] = LAYOUT_60_ansi( KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_APP, KC_RCTL ), - [1] = LAYOUT( + [1] = LAYOUT_60_ansi( KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, KC_END, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_LOCK, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, C(A(KC_DEL)) ), - [2] = LAYOUT( + [2] = LAYOUT_60_ansi( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), - [3] = LAYOUT( + [3] = LAYOUT_60_ansi( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, diff --git a/keyboards/0xc7/61key/readme.md b/keyboards/0xc7/61key/readme.md index 9c4b603159..356b8b07d4 100644 --- a/keyboards/0xc7/61key/readme.md +++ b/keyboards/0xc7/61key/readme.md @@ -10,11 +10,11 @@ Custom keyboard designed by RealEmanGaming aka 0xC7 Make example for this keyboard (after setting up your build environment): - make 61key:default + make 0xc7/61key:default Flashing example for this keyboard: - make 61key:default:flash + make 0xc7/61key:default:flash See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). From e8db309613c99d1ffe25320680368d41bf5c8535 Mon Sep 17 00:00:00 2001 From: MechMerlin <30334081+mechmerlin@users.noreply.github.com> Date: Tue, 5 Oct 2021 16:49:50 -0700 Subject: [PATCH 195/595] [Keymap] Some updates to mechmerlin userspace and keymaps (#14711) --- .../60_ansi/mechmerlin-ansi/keymap.c | 28 +++++++++---------- .../60_ansi/mechmerlin-ansi/readme.md | 3 +- .../mechmerlin-split/keymap.c | 28 +++++++++---------- .../mechmerlin-split/readme.md | 1 + layouts/community/65_ansi/mechmerlin/keymap.c | 2 +- .../65_ansi_blocker/mechmerlin/keymap.c | 2 +- .../65_ansi_blocker/mechmerlin/readme.md | 1 + layouts/community/66_ansi/mechmerlin/keymap.c | 2 +- layouts/community/68_ansi/mechmerlin/keymap.c | 2 +- .../75_ansi/mechmerlin-75_ansi/keymap.c | 26 ++++++++--------- .../75_ansi/mechmerlin-75_ansi/readme.md | 4 +-- users/mechmerlin/changelog.md | 9 ++++++ users/mechmerlin/mechmerlin.c | 7 +++-- users/mechmerlin/mechmerlin.h | 2 +- users/mechmerlin/readme.md | 6 +++- 15 files changed, 68 insertions(+), 55 deletions(-) diff --git a/layouts/community/60_ansi/mechmerlin-ansi/keymap.c b/layouts/community/60_ansi/mechmerlin-ansi/keymap.c index 5ae09ec086..97116462ac 100644 --- a/layouts/community/60_ansi/mechmerlin-ansi/keymap.c +++ b/layouts/community/60_ansi/mechmerlin-ansi/keymap.c @@ -11,23 +11,23 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_FL] = LAYOUT_60_ansi( KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \ - BL_TOGG, BL_INC, BL_DEC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - VLK_TOG, RGB_RMOD, RGB_HUD, RGB_SAD, RGB_VAD, RGB_SPD, KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, MO(_CL), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + BL_TOGG, BL_INC, BL_DEC, BL_STEP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI, _______, _______, _______, _______, _______, _______, _______, \ + VLK_TOG, RGB_RMOD, RGB_HUD, RGB_SAD, RGB_VAD, RGB_SPD, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, \ + _______, _______, _______, MO(_CL), _______, _______, _______, _______), [_AL] = LAYOUT_60_ansi( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT), + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP, \ + _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RIGHT), [_CL] = LAYOUT_60_ansi( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, EEP_RST, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, EEP_RST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, KC_VER, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______), }; diff --git a/layouts/community/60_ansi/mechmerlin-ansi/readme.md b/layouts/community/60_ansi/mechmerlin-ansi/readme.md index 1e8d6de597..5e9c4f1a88 100644 --- a/layouts/community/60_ansi/mechmerlin-ansi/readme.md +++ b/layouts/community/60_ansi/mechmerlin-ansi/readme.md @@ -5,8 +5,7 @@ YouTube channel. It is used on his * [1up60HSE](https://github.com/qmk/qmk_firmware/tree/master/keyboards/1upkeyboards/1up60hse) -* [dz60rgb-ansi](https://github.com/qmk/qmk_firmware/tree/master/keyboards/dztech/dz60rgb) -* [HS60 V2](https://github.com/qmk/qmk_firmware/tree/master/keyboards/hs60/v2) +* [DZ60rgb-ANSI V1](https://github.com/qmk/qmk_firmware/tree/master/keyboards/dztech/dz60rgb) ## Keymap Notes - Arrow toggle switch is tapping the `FN` key once. diff --git a/layouts/community/60_ansi_split_bs_rshift/mechmerlin-split/keymap.c b/layouts/community/60_ansi_split_bs_rshift/mechmerlin-split/keymap.c index 2b82286381..2cea4fd44f 100644 --- a/layouts/community/60_ansi_split_bs_rshift/mechmerlin-split/keymap.c +++ b/layouts/community/60_ansi_split_bs_rshift/mechmerlin-split/keymap.c @@ -11,23 +11,23 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_FL] = LAYOUT_60_ansi_split_bs_rshift( KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_DEL, \ - BL_TOGG, BL_INC, BL_DEC, BL_STEP, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - VLK_TOG, RGB_RMOD, RGB_HUD, RGB_SAD, RGB_VAD, RGB_SPD, KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, MO(_CL), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + BL_TOGG, BL_INC, BL_DEC, BL_STEP, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI, _______, _______, _______, _______, _______, _______, _______, \ + VLK_TOG, RGB_RMOD, RGB_HUD, RGB_SAD, RGB_VAD, RGB_SPD, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______, \ + _______, _______, _______, MO(_CL), _______, _______, _______, _______), [_AL] = LAYOUT_60_ansi_split_bs_rshift( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT), + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_UP, _______, \ + _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RIGHT), [_CL] = LAYOUT_60_ansi_split_bs_rshift( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, EEP_RST, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, EEP_RST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, KC_VER, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______) }; diff --git a/layouts/community/60_ansi_split_bs_rshift/mechmerlin-split/readme.md b/layouts/community/60_ansi_split_bs_rshift/mechmerlin-split/readme.md index e3f6311b19..f883a3d046 100644 --- a/layouts/community/60_ansi_split_bs_rshift/mechmerlin-split/readme.md +++ b/layouts/community/60_ansi_split_bs_rshift/mechmerlin-split/readme.md @@ -10,6 +10,7 @@ It is used on his * [Sentraq S60-X RGB](https://github.com/qmk/qmk_firmware/tree/master/keyboards/s60_x) * [Waldo](https://github.com/qmk/qmk_firmware/tree/master/keyboards/waldo) * [Zeal60 Rev4](https://github.com/qmk/qmk_firmware/tree/master/keyboards/zeal60) +* [AN-C](https://github.com/qmk/qmk_firmware/tree/master/keyboards/cannonkeys/an_c) ## Keymap Notes - Highly influenced by the KBP V60 and WKL B.Face standard layouts diff --git a/layouts/community/65_ansi/mechmerlin/keymap.c b/layouts/community/65_ansi/mechmerlin/keymap.c index df75b11f3f..4799083661 100644 --- a/layouts/community/65_ansi/mechmerlin/keymap.c +++ b/layouts/community/65_ansi/mechmerlin/keymap.c @@ -50,7 +50,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, EEP_RST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, KC_VER, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), }; diff --git a/layouts/community/65_ansi_blocker/mechmerlin/keymap.c b/layouts/community/65_ansi_blocker/mechmerlin/keymap.c index 0ce4f38c64..d82a6327d1 100644 --- a/layouts/community/65_ansi_blocker/mechmerlin/keymap.c +++ b/layouts/community/65_ansi_blocker/mechmerlin/keymap.c @@ -37,7 +37,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, EEP_RST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, KC_VER, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) }; diff --git a/layouts/community/65_ansi_blocker/mechmerlin/readme.md b/layouts/community/65_ansi_blocker/mechmerlin/readme.md index 70ee6e385f..1649c88974 100644 --- a/layouts/community/65_ansi_blocker/mechmerlin/readme.md +++ b/layouts/community/65_ansi_blocker/mechmerlin/readme.md @@ -6,6 +6,7 @@ YouTube channel. It is used on his * [RGB Doro67](https://github.com/qmk/qmk_firmware/tree/master/keyboards/doro67/rgb) * [KBD67 mkii](https://github.com/qmk/qmk_firmware/tree/master/keyboards/kbdfans/kbd67/mkiirgb/v1) +* [Iron 165](https://github.com/qmk/qmk_firmware/tree/master/keyboards/cannonkeys/iron165) ### Build To build the firmware file associated with this keymap, simply run `make your_keyboard:mechmerlin`. \ No newline at end of file diff --git a/layouts/community/66_ansi/mechmerlin/keymap.c b/layouts/community/66_ansi/mechmerlin/keymap.c index 8de35811d9..737b52e84c 100644 --- a/layouts/community/66_ansi/mechmerlin/keymap.c +++ b/layouts/community/66_ansi/mechmerlin/keymap.c @@ -20,6 +20,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { BL_STEP,RGB_M_P,RGB_M_B,RGB_M_R,RGB_M_SW,RGB_M_SN,RGB_M_K,RGB_M_X,RGB_M_G,_______,_______,_______,_______, _______, RGB_VAI, \ _______,_______,_______,EEP_RST,RESET, _______,_______,_______,_______,_______,_______,_______,_______,_______, RGB_VAD, \ _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \ - VLK_TOG, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, RGB_SAI, \ + VLK_TOG, _______,_______,_______,KC_VER,_______,_______,_______,_______,_______,_______, _______, RGB_SAI, \ CK_TOGG,_______,_______, _______, _______,_______,_______,RGB_HUD,RGB_SAD,RGB_HUI), }; diff --git a/layouts/community/68_ansi/mechmerlin/keymap.c b/layouts/community/68_ansi/mechmerlin/keymap.c index b3789d84a4..19f30f8f00 100644 --- a/layouts/community/68_ansi/mechmerlin/keymap.c +++ b/layouts/community/68_ansi/mechmerlin/keymap.c @@ -20,6 +20,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, EEP_RST, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VER, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), }; \ No newline at end of file diff --git a/layouts/community/75_ansi/mechmerlin-75_ansi/keymap.c b/layouts/community/75_ansi/mechmerlin-75_ansi/keymap.c index c239e26834..387f2d9edb 100644 --- a/layouts/community/75_ansi/mechmerlin-75_ansi/keymap.c +++ b/layouts/community/75_ansi/mechmerlin-75_ansi/keymap.c @@ -12,20 +12,18 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(_FL), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), [_FL] = LAYOUT_75_ansi(\ - RESET, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, RGB_M_K, RGB_M_X, RGB_M_G, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - BL_TOGG, BL_INC, BL_DEC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - VLK_TOG, RGB_RMOD, RGB_HUD, RGB_SAD, RGB_VAD, RGB_SPD, KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_TRNS, KC_TRNS, KC_PGUP, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, MO(_CL), KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END), + _______, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, RGB_M_K, RGB_M_X, RGB_M_G, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + BL_TOGG, BL_INC, BL_DEC, BL_STEP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, RGB_SPI, _______, _______, _______, _______, _______, _______, _______, _______, + VLK_TOG, RGB_RMOD, RGB_HUD, RGB_SAD, RGB_VAD, RGB_SPD, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, KC_PGUP, _______, + _______, _______, _______, MO(_CL), _______, _______, _______, KC_HOME, KC_PGDN, KC_END), [_CL] = LAYOUT_75_ansi(\ - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, EEP_RST, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), - - + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, EEP_RST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, KC_VER, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), }; diff --git a/layouts/community/75_ansi/mechmerlin-75_ansi/readme.md b/layouts/community/75_ansi/mechmerlin-75_ansi/readme.md index d406155bc7..8205abe283 100644 --- a/layouts/community/75_ansi/mechmerlin-75_ansi/readme.md +++ b/layouts/community/75_ansi/mechmerlin-75_ansi/readme.md @@ -3,9 +3,7 @@ This is the 75% layout used by u/merlin36, host of the [MechMerlin](www.youtube.com/mechmerlin) YouTube channel. -It is used on his -* [Duck Octagon V2](https://github.com/qmk/qmk_firmware/tree/master/keyboards/duck/octagon/v2) -* [XD84](https://github.com/qmk/qmk_firmware/tree/master/keyboards/xd84) +MechMerlin currently has no keyboard supporting this layout. ### Build To build the firmware file associated with this keymap, simply run `make your_keyboard:mechmerlin-ansi`. diff --git a/users/mechmerlin/changelog.md b/users/mechmerlin/changelog.md index 2f8fa687a9..dc98e2af01 100644 --- a/users/mechmerlin/changelog.md +++ b/users/mechmerlin/changelog.md @@ -1,6 +1,15 @@ # Changelog All notable changes to my userspace will be documented in this file. +## [0.4.0] - 2021-10-05 + +### Added +- Introduced new keycode KV_VER to output the version of QMK. Thanks to drashna for this. + +### Changed +- Updated keymaps to use underscores instead of KC_TRNS as it was getting hard to read for my tired eyes. +- Updated readmes on my preferred layouts. + ## [0.3.0] - 2020-02-02 ### Changed - Added the `_CL` layer to all the boards for access to `EEP_RST` and `RESET` keycodes. This was done primarily to avoid triggering `RESET` accidentally. diff --git a/users/mechmerlin/mechmerlin.c b/users/mechmerlin/mechmerlin.c index ad60bd1966..23def968d4 100644 --- a/users/mechmerlin/mechmerlin.c +++ b/users/mechmerlin/mechmerlin.c @@ -1,4 +1,7 @@ #include "mechmerlin.h" +#include "version.h" + +#define TAP_CODE_DELAY 10 bool process_record_user(uint16_t keycode, keyrecord_t *record) { static uint16_t fnx_layer_timer; @@ -15,9 +18,9 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } } break; - case KC_MAC: + case KC_VER: if (record->event.pressed) { - SEND_STRING("meow"); + send_string_with_delay_P(PSTR(QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION ", Built on: " QMK_BUILDDATE), TAP_CODE_DELAY); } else { } break; diff --git a/users/mechmerlin/mechmerlin.h b/users/mechmerlin/mechmerlin.h index 9802c3ecd2..79386e7663 100644 --- a/users/mechmerlin/mechmerlin.h +++ b/users/mechmerlin/mechmerlin.h @@ -12,7 +12,7 @@ enum userspace_layers { // Enum of custom keycodes defined in process_record_user enum keycodes { KC_FNX, // Hold for FN layer, tap to toggle ARROWS layer. - KC_MAC, // Text macro. + KC_VER, // Version macro. }; // Custom #defined keycodes diff --git a/users/mechmerlin/readme.md b/users/mechmerlin/readme.md index 14a86f055b..c0b1c54c55 100644 --- a/users/mechmerlin/readme.md +++ b/users/mechmerlin/readme.md @@ -1,4 +1,4 @@ -# MechMerlin's Userspace v0.2.0 +# MechMerlin's Userspace v0.4.0 This is a collection of my most commonly used QMK features. @@ -32,6 +32,10 @@ It is used primarily on my `LAYOUT_60_ansi` boards as my regular toggle (the 1u This is just a wrapper for `CTL_T(KC_CAPS)`. This is a hold for control and tap for caps lock. +### KC_VER + +Output the version of QMK Firmware on device. + ## QMK Features ---- From 22470f030206336c970bc5f6e1d82f25520224f5 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Tue, 5 Oct 2021 17:49:39 -0700 Subject: [PATCH 196/595] [Keyboard] Add basic Keyhive Sofle support (#14296) Co-authored-by: Ryan Co-authored-by: Sergey Vlasov --- keyboards/sofle/keyhive/config.h | 105 +++++++++++++++++++++++++++ keyboards/sofle/keyhive/info.json | 14 ++++ keyboards/sofle/keyhive/keyhive.c | 90 +++++++++++++++++++++++ keyboards/sofle/keyhive/keyhive.h | 47 ++++++++++++ keyboards/sofle/keyhive/readme.md | 66 +++++++++++++++++ keyboards/sofle/keyhive/rules.mk | 26 +++++++ keyboards/sofle/keymaps/via/config.h | 61 +++++++++------- keyboards/sofle/rev1/config.h | 1 - keyboards/sofle/sofle.h | 6 +- 9 files changed, 385 insertions(+), 31 deletions(-) create mode 100755 keyboards/sofle/keyhive/config.h create mode 100644 keyboards/sofle/keyhive/info.json create mode 100755 keyboards/sofle/keyhive/keyhive.c create mode 100755 keyboards/sofle/keyhive/keyhive.h create mode 100755 keyboards/sofle/keyhive/readme.md create mode 100755 keyboards/sofle/keyhive/rules.mk diff --git a/keyboards/sofle/keyhive/config.h b/keyboards/sofle/keyhive/config.h new file mode 100755 index 0000000000..14303be411 --- /dev/null +++ b/keyboards/sofle/keyhive/config.h @@ -0,0 +1,105 @@ +/* Copyright + * 2021 solartempest + * 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once +#include "config_common.h" + +// USB Device descriptor parameter + +#define VENDOR_ID 0xFC32 +#define PRODUCT_ID 0x1287 +#define DEVICE_VER 0x0002 +#define MANUFACTURER Keyhive +#define PRODUCT Sofle // VIA version for this PCB is incorrect for the bottom row + +// Key matrix size +// Rows are doubled-up. Added extra column for rotary encoder VIA mapping. +#define MATRIX_ROWS 10 +#define MATRIX_COLS 6 + +// wiring of each half +#define MATRIX_ROW_PINS \ + { C6, D7, E6, B4, B5 } +#define MATRIX_COL_PINS \ + { B6, B2, B3, B1, F7, F6 } +#define MATRIX_ROW_PINS_RIGHT \ + { C6, D7, E6, B4, B5 } +#define MATRIX_COL_PINS_RIGHT \ + { F6, F7, B1, B3, B2, B6 } + +#define DIODE_DIRECTION COL2ROW + +#define DEBOUNCE 5 + +// Encoder support +#define ENCODERS_PAD_A \ + { F5 } +#define ENCODERS_PAD_B \ + { F4 } +#define ENCODERS_PAD_A_RIGHT \ + { F4 } +#define ENCODERS_PAD_B_RIGHT \ + { F5 } +#define ENCODER_RESOLUTIONS \ + { 4, 2 } // Left encoder seems to have double-output issue but right does not. + +#define TAP_CODE_DELAY 10 + +// Communication between sides +#define SOFT_SERIAL_PIN D2 + +// OLED settings +#define OLED_TIMEOUT 80000 +#define OLED_BRIGHTNESS 90 + +#define SPLIT_WPM_ENABLE +#define SPLIT_OLED_ENABLE +#define SPLIT_TRANSPORT_MIRROR + +// Add RGB underglow +#define RGB_DI_PIN D3 +#define RGBLED_NUM 74 +#define RGBLED_SPLIT \ + { 37, 37 } + +#define RGBLIGHT_LIMIT_VAL 160 // Power draw may exceed 0.6A at max brightness with white colour. +#define RGBLIGHT_LAYERS +#define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF +#define RGBLIGHT_SLEEP + +#define DRIVER_LED_TOTAL RGBLED_NUM +#define RGB_MATRIX_SPLIT RGBLED_SPLIT + +#define RGB_MATRIX_KEYPRESSES // reacts to keypresses +#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended +#define RGB_MATRIX_FRAMEBUFFER_EFFECTS +#define RGB_MATRIX_KEYPRESSES // reacts to keypresses +// # define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses) +// # define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects +#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended +#define RGB_MATRIX_FRAMEBUFFER_EFFECTS +// # define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness) +// # define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) +#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 150 out of 255. Higher may cause the controller to crash. + +#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_GRADIENT_LEFT_RIGHT + +#define RGB_MATRIX_HUE_STEP 8 +#define RGB_MATRIX_SAT_STEP 8 +#define RGB_MATRIX_VAL_STEP 8 +#define RGB_MATRIX_SPD_STEP 10 diff --git a/keyboards/sofle/keyhive/info.json b/keyboards/sofle/keyhive/info.json new file mode 100644 index 0000000000..e2cbf0c716 --- /dev/null +++ b/keyboards/sofle/keyhive/info.json @@ -0,0 +1,14 @@ +{ + "keyboard_name": "Sofle", + "layouts": { + "LAYOUT": { + "layout": [ + {"x":0, "y":0.5}, {"x":1, "y":0.375}, {"x":2, "y":0.125}, {"x":3, "y":0}, {"x":4, "y":0.125}, {"x":5, "y":0.25}, {"x":10.5, "y":0.25}, {"x":11.5, "y":0.125}, {"x":12.5, "y":0}, {"x":13.5, "y":0.125}, {"x":14.5, "y":0.375}, {"x":15.5, "y":0.5}, + {"x":0, "y":1.5}, {"x":1, "y":1.375}, {"x":2, "y":1.125}, {"x":3, "y":1}, {"x":4, "y":1.125}, {"x":5, "y":1.25}, {"x":10.5, "y":1.25}, {"x":11.5, "y":1.125}, {"x":12.5, "y":1}, {"x":13.5, "y":1.125}, {"x":14.5, "y":1.375}, {"x":15.5, "y":1.5}, + {"x":0, "y":2.5}, {"x":1, "y":2.375}, {"x":2, "y":2.125}, {"x":3, "y":2}, {"x":4, "y":2.125}, {"x":5, "y":2.25}, {"x":10.5, "y":2.25}, {"x":11.5, "y":2.125}, {"x":12.5, "y":2}, {"x":13.5, "y":2.125}, {"x":14.5, "y":2.375}, {"x":15.5, "y":2.5}, + {"x":0, "y":3.5}, {"x":1, "y":3.375}, {"x":2, "y":3.125}, {"x":3, "y":3}, {"x":4, "y":3.125}, {"x":5, "y":3.25}, {"x":6, "y":2.75}, {"x":9.5, "y":2.75}, {"x":10.5, "y":3.25}, {"x":11.5, "y":3.125}, {"x":12.5, "y":3}, {"x":13.5, "y":3.125}, {"x":14.5, "y":3.375}, {"x":15.5, "y":3.5}, + {"x":1.5, "y":4.375}, {"x":2.5, "y":4.125}, {"x":3.5, "y":4.15}, {"x":4.5, "y":4.25}, {"x":6, "y":4.25, "h":1.5}, {"x":9.5, "y":4.25, "h":1.5}, {"x":11, "y":4.25}, {"x":12, "y":4.15}, {"x":13, "y":4.125}, {"x":14, "y":4.375} + ] + } + } +} diff --git a/keyboards/sofle/keyhive/keyhive.c b/keyboards/sofle/keyhive/keyhive.c new file mode 100755 index 0000000000..c7ad988761 --- /dev/null +++ b/keyboards/sofle/keyhive/keyhive.c @@ -0,0 +1,90 @@ +/* Copyright + * 2021 solartempest + * 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "keyhive.h" +#ifdef RGB_MATRIX_ENABLE +// Physical Layout +// Columns +// 0 1 2 3 4 5 6 7 8 9 10 11 12 13 +// ROWS +// 12 13 22 23 32 33 33 32 23 22 13 12 0 +// 02 03 04 04 03 02 +// 11 14 21 24 31 34 34 31 24 21 14 11 1 +// 01 01 +// 10 15 20 25 30 35 35 30 25 20 15 10 2 +// +// 09 16 19 26 29 36 36 29 26 19 16 09 3 +// +// 08 17 18 27 28 28 27 18 17 08 4 +// 07 06 05 05 06 07 + +// clang-format off + +led_config_t g_led_config = { + { + { 11, 12, 21, 22, 31, 32 }, + { 10, 13, 20, 23, 30, 33 }, + { 9, 14, 19, 24, 29, 34}, + { 8, 15, 18, 25, 28, 35}, + { 7, 16, 17, 26, 27, NO_LED }, + { 47, 48, 57, 58, 67, 68}, + { 46, 49, 56, 59, 66, 69}, + { 45, 50, 55, 60, 65, 70}, + { 44, 51, 54, 61, 64, 71}, + { 43, 52, 53, 62, 63, NO_LED } + }, + { + // Left side underglow + {96, 40}, {16, 20}, {48, 10}, {80, 18}, {88, 60}, {56, 57}, {24,60}, + // Left side Matrix + {32, 57}, { 0, 48}, { 0, 36}, { 0, 24}, { 0, 12}, + {16, 12}, {16, 24}, {16, 36}, {16, 48}, {48, 55}, + {64, 57}, {32, 45}, {32, 33}, {32, 21}, {32, 9}, + {48, 7}, {48, 19}, {48, 31}, {48, 43}, {80, 59}, + {96, 64}, {64, 45}, {64, 33}, {64, 21}, {64, 9}, + {80, 10}, {80, 22}, {80, 34}, {80, 47}, + + + // Right side underglow + {128, 40}, {208, 20}, {176, 10}, {144, 18}, {136, 60}, {168, 57}, {200,60}, + // Right side Matrix + {192, 57}, {224, 48}, {224, 36}, {224, 24}, {224, 12}, + {208, 12}, {208, 24}, {208, 36}, {208, 48}, {176, 55}, + {160, 57}, {192, 45}, {192, 33}, {192, 21}, {192, 9}, + {176, 7}, {176, 19}, {176, 31}, {176, 43}, {144, 59}, + {128, 64}, {160, 45}, {160, 33}, {160, 21}, {160, 9}, + {144, 10}, {144, 22}, {144, 34}, {144, 47}, + }, + { + LED_FLAG_NONE, LED_FLAG_UNDERGLOW, LED_FLAG_UNDERGLOW, LED_FLAG_UNDERGLOW, LED_FLAG_UNDERGLOW, LED_FLAG_UNDERGLOW, LED_FLAG_UNDERGLOW, + LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, + LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, + LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, + LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, + LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, + LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, + LED_FLAG_NONE, LED_FLAG_UNDERGLOW, LED_FLAG_UNDERGLOW, LED_FLAG_UNDERGLOW, LED_FLAG_UNDERGLOW, LED_FLAG_UNDERGLOW, LED_FLAG_UNDERGLOW, + LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, + LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, + LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, + LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, + LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, + LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT, LED_FLAG_KEYLIGHT + } +}; +#endif diff --git a/keyboards/sofle/keyhive/keyhive.h b/keyboards/sofle/keyhive/keyhive.h new file mode 100755 index 0000000000..d8b21e16d7 --- /dev/null +++ b/keyboards/sofle/keyhive/keyhive.h @@ -0,0 +1,47 @@ +/* Copyright + * 2021 solartempest + * 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +// clang-format off +// Extra keys are added for rotary encoder support in VIA +#define LAYOUT( \ + LA1, LA2, LA3, LA4, LA5, LA6, RA6, RA5, RA4, RA3, RA2, RA1, \ + LB1, LB2, LB3, LB4, LB5, LB6, RB6, RB5, RB4, RB3, RB2, RB1, \ + LC1, LC2, LC3, LC4, LC5, LC6, RC6, RC5, RC4, RC3, RC2, RC1, \ + LD1, LD2, LD3, LD4, LD5, LD6, LE1, RE6, RD6, RD5, RD4, RD3, RD2, RD1, \ + LE2, LE3, LE4, LE5, LE6, RE5, RE4, RE3, RE2, RE1 \ + ) \ + { \ + { LA1, LA2, LA3, LA4, LA5, LA6 }, \ + { LB1, LB2, LB3, LB4, LB5, LB6 }, \ + { LC1, LC2, LC3, LC4, LC5, LC6 }, \ + { LD1, LD2, LD3, LD4, LD5, LD6 }, \ + { LE1, LE2, LE3, LE4, LE5, LE6 }, \ + { RA1, RA2, RA3, RA4, RA5, RA6 }, \ + { RB1, RB2, RB3, RB4, RB5, RB6 }, \ + { RC1, RC2, RC3, RC4, RC5, RC6 }, \ + { RD1, RD2, RD3, RD4, RD5, RD6 }, \ + { RE1, RE2, RE3, RE4, RE5, RE6 } \ + } + + +//RGB LED Conversion macro from physical array to electric array (+146 to firmware size) +// clang-format on diff --git a/keyboards/sofle/keyhive/readme.md b/keyboards/sofle/keyhive/readme.md new file mode 100755 index 0000000000..43813b856a --- /dev/null +++ b/keyboards/sofle/keyhive/readme.md @@ -0,0 +1,66 @@ +# Sofle Keyboard + +![SofleKeyboard version 2.1 RGB Keyhive](https://i.imgur.com/WH9OoWuh.jpg) + +Sofle is 6×4+5 keys column-staggered split keyboard. Based on Lily58, Corne and Helix keyboards. + +For detailed instructions on using VIA and flashing, please refer to the sections further down the page! + +For details about the keyboard design, refer to Josef's blog: [Sofle Keyboard - a split keyboard based on Lily58 and Crkbd](https://josef-adamcik.cz/electronics/let-me-introduce-you-sofle-keyboard-split-keyboard-based-on-lily58.html) + +Build guide: [Keyhive Sofle RGB build guide](https://github.com/keyhive/build_guides/blob/master/docs/keyboards/sofle-rgb.md) + +* Keyboard Maintainer: [Solartempest] +* Hardware Supported: SofleKeyboard V2.1 RGB PCB, ProMicro / Elite-C +* Hardware Availability: [Keyhive](https://keyhive.xyz/shop/sofle) + +# Custom Features: + +### OLED Features: +- Includes Snakey keyboard pet! Slithers according to WPM, bites, and sticks its tongue out at you! +- OLED displays current layer, lock key status, WPM, custom logo, and custom name. +- OLED shuts off on idle and when computer is sleeping. +- Includes working Luna keyboard pet. +- Includes working Bongocat (disable RGB for sufficient space). +- Includes stock OLED code as well. + +### RGB Features: +- Adds custom layer lighting with custom gradients for each layer. +- RGB underglow support and remapped to physical locations (nicer gradients and effects). +- Adds white caps lock, scroll lock, and num lock key indicators using the top row/underglow LEDs. + +### Rotary Encoder and VIA Features: +- Fully emappable left encoder controls volume up/down/mute. Right encoder PGUP/PGDOWN. +- Allows for live remapping of per-layer rotary encoder functions in VIA. +- VIA support included by default. +- This fixes the Keyhive left bottom row offset issue in VIA. You will need to import sofle.json in VIA. +- Custom macro key in VIA for Super Alt Tab, which is fully compatible with rotary encoders. +- Custom macro key in VIA for moving windows to other monitors in Windows, which is fully compatible with rotary encoders. + +### Tap and Other Features: +- Push left-shift + backspace to delete whole words. Right-shift + backspace to delete whole words in the opposite direction. +- Double tap layers to stay on a layer instead of momentary push. +- Adds key combo functionality. +- Symmetric modifiers (CMD/Super, Alt/Opt, Ctrl, Shift). + +## Using with VIA + +- After flashing, in VIA make sure to Import Keymap, which is "sofle VIA keymap.json". This will alow VIA to recognize the updated layout and custom functions. VIA will not auto-recognize the keyboard with this firmware because of the necessary customization. +- Go to Save+Load to Load Saved Layout. You can import my own layout "sofle VIA layout.json" or just use the Keymap tab to assign your own keys. Having another keyboard connected can be handy for doing this step. +- It is a good idea to Save Current Layout after you decide on your mapping. + + +Make example for this keyboard (after setting up your build environment): + + make sofle/keyhive:default + +Flashing example for this keyboard: + + make sofle/keyhive:default:flash + +Press reset button on he keyboard when asked. + +Disconnect the first half, connect the second one and repeat the process. + + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/sofle/keyhive/rules.mk b/keyboards/sofle/keyhive/rules.mk new file mode 100755 index 0000000000..44846f97cc --- /dev/null +++ b/keyboards/sofle/keyhive/rules.mk @@ -0,0 +1,26 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +ENCODER_ENABLE = yes +LTO_ENABLE = yes +SPLIT_KEYBOARD = yes +OLED_ENABLE = yes +OLED_DRIVER = SSD1306 diff --git a/keyboards/sofle/keymaps/via/config.h b/keyboards/sofle/keymaps/via/config.h index c2e48ea7d2..77ce4f2590 100644 --- a/keyboards/sofle/keymaps/via/config.h +++ b/keyboards/sofle/keymaps/via/config.h @@ -1,19 +1,19 @@ - /* Copyright 2020 Josef Adamcik - * Modification for VIA support and RGB underglow by Jens Bonk-Wiltfang - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ +/* Copyright 2020 Josef Adamcik + * Modification for VIA support and RGB underglow by Jens Bonk-Wiltfang + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ #pragma once @@ -22,16 +22,21 @@ see https://docs.qmk.fm/#/feature_split_keyboard?id=setting-handedness for more options. */ -//Add RGB underglow and top facing lighting -#define RGB_DI_PIN D3 -#ifdef RGB_MATRIX_ENABLE -#define RGBLED_NUM 36 // Number of LEDs -#define DRIVER_LED_TOTAL RGBLED_NUM +#if defined(KEYBOARD_sofle_rev1) +// Add RGB underglow and top facing lighting +# define RGB_DI_PIN D3 +# define RGBLED_NUM 70 +# define RGBLED_SPLIT \ + { 36, 36 } +# ifdef RGB_MATRIX_ENABLE +# define DRIVER_LED_TOTAL RGBLED_NUM +# define RGB_MATRIX_SPLIT RGBLED_SPLIT +# define SPLIT_TRANSPORT_MIRROR +# else +# define RGBLIGHT_ANIMATIONS +# define RGBLIGHT_LIMIT_VAL 120 +# define RGBLIGHT_HUE_STEP 10 +# define RGBLIGHT_SAT_STEP 17 +# define RGBLIGHT_VAL_STEP 17 +# endif #endif -#define RGBLED_NUM 70 -#define RGBLED_SPLIT {36,36} -#define RGBLIGHT_ANIMATIONS -#define RGBLIGHT_LIMIT_VAL 120 -#define RGBLIGHT_HUE_STEP 10 -#define RGBLIGHT_SAT_STEP 17 -#define RGBLIGHT_VAL_STEP 17 diff --git a/keyboards/sofle/rev1/config.h b/keyboards/sofle/rev1/config.h index ab0e0b39d4..831387e990 100644 --- a/keyboards/sofle/rev1/config.h +++ b/keyboards/sofle/rev1/config.h @@ -36,4 +36,3 @@ #define NO_ACTION_MACRO #define NO_ACTION_FUNCTION - diff --git a/keyboards/sofle/sofle.h b/keyboards/sofle/sofle.h index 67bd529a1b..90ee00bfd7 100644 --- a/keyboards/sofle/sofle.h +++ b/keyboards/sofle/sofle.h @@ -1,5 +1,7 @@ #pragma once -#ifdef KEYBOARD_sofle_rev1 - #include "rev1.h" +#if defined(KEYBOARD_sofle_rev1) +# include "rev1.h" +#elif defined(KEYBOARD_sofle_keyhive) +# include "keyhive.h" #endif From 3b8c4979dc17a52cd87f30b4986ca46d0b365860 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Tue, 5 Oct 2021 17:50:23 -0700 Subject: [PATCH 197/595] [Bug] Fix command feature if mousekey is enabled and using 3-speed setting (#14697) --- quantum/command.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/quantum/command.c b/quantum/command.c index 2ff640a7bc..6d56a25ea1 100644 --- a/quantum/command.c +++ b/quantum/command.c @@ -39,7 +39,7 @@ along with this program. If not, see . # include "backlight.h" #endif -#if defined(MOUSEKEY_ENABLE) && !defined(MK_3_SPEED) +#if defined(MOUSEKEY_ENABLE) # include "mousekey.h" #endif @@ -53,7 +53,7 @@ static void print_version(void); static void print_status(void); static bool command_console(uint8_t code); static void command_console_help(void); -#if defined(MOUSEKEY_ENABLE) && !defined(MK_3_SPEED) +#if defined(MOUSEKEY_ENABLE) static bool mousekey_console(uint8_t code); #endif @@ -73,7 +73,7 @@ bool command_proc(uint8_t code) { else return (command_console_extra(code) || command_console(code)); break; -#if defined(MOUSEKEY_ENABLE) && !defined(MK_3_SPEED) +#if defined(MOUSEKEY_ENABLE) case MOUSEKEY: mousekey_console(code); break; From ba8f1454f46537609f65a6abb4bb0e82fecbc2f1 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Tue, 5 Oct 2021 18:01:45 -0700 Subject: [PATCH 198/595] Move Audio drivers from quantum to platform drivers folder (#14308) * Move Audio drivers from quantum to platform drivers folder * fix path for audio drivers Co-authored-by: Ryan Co-authored-by: Ryan --- common_features.mk | 2 +- .../avr/drivers/audio_pwm.h | 0 .../avr/drivers/audio_pwm_hardware.c | 0 .../chibios/drivers/audio_dac.h | 0 .../chibios/drivers/audio_dac_additive.c | 0 .../chibios/drivers/audio_dac_basic.c | 0 .../chibios/drivers/audio_pwm.h | 0 .../chibios/drivers/audio_pwm_hardware.c | 0 .../chibios/drivers/audio_pwm_software.c | 0 quantum/audio/audio.h | 13 ++++--------- 10 files changed, 5 insertions(+), 10 deletions(-) rename quantum/audio/driver_avr_pwm.h => platforms/avr/drivers/audio_pwm.h (100%) rename quantum/audio/driver_avr_pwm_hardware.c => platforms/avr/drivers/audio_pwm_hardware.c (100%) rename quantum/audio/driver_chibios_dac.h => platforms/chibios/drivers/audio_dac.h (100%) rename quantum/audio/driver_chibios_dac_additive.c => platforms/chibios/drivers/audio_dac_additive.c (100%) rename quantum/audio/driver_chibios_dac_basic.c => platforms/chibios/drivers/audio_dac_basic.c (100%) rename quantum/audio/driver_chibios_pwm.h => platforms/chibios/drivers/audio_pwm.h (100%) rename quantum/audio/driver_chibios_pwm_hardware.c => platforms/chibios/drivers/audio_pwm_hardware.c (100%) rename quantum/audio/driver_chibios_pwm_software.c => platforms/chibios/drivers/audio_pwm_software.c (100%) diff --git a/common_features.mk b/common_features.mk index a71bcace02..d7b0f826aa 100644 --- a/common_features.mk +++ b/common_features.mk @@ -83,7 +83,7 @@ ifeq ($(strip $(AUDIO_ENABLE)), yes) SRC += $(QUANTUM_DIR)/process_keycode/process_audio.c SRC += $(QUANTUM_DIR)/process_keycode/process_clicky.c SRC += $(QUANTUM_DIR)/audio/audio.c ## common audio code, hardware agnostic - SRC += $(QUANTUM_DIR)/audio/driver_$(PLATFORM_KEY)_$(strip $(AUDIO_DRIVER)).c + SRC += $(PLATFORM_PATH)/$(PLATFORM_KEY)/$(DRIVER_DIR)/audio_$(strip $(AUDIO_DRIVER)).c SRC += $(QUANTUM_DIR)/audio/voices.c SRC += $(QUANTUM_DIR)/audio/luts.c endif diff --git a/quantum/audio/driver_avr_pwm.h b/platforms/avr/drivers/audio_pwm.h similarity index 100% rename from quantum/audio/driver_avr_pwm.h rename to platforms/avr/drivers/audio_pwm.h diff --git a/quantum/audio/driver_avr_pwm_hardware.c b/platforms/avr/drivers/audio_pwm_hardware.c similarity index 100% rename from quantum/audio/driver_avr_pwm_hardware.c rename to platforms/avr/drivers/audio_pwm_hardware.c diff --git a/quantum/audio/driver_chibios_dac.h b/platforms/chibios/drivers/audio_dac.h similarity index 100% rename from quantum/audio/driver_chibios_dac.h rename to platforms/chibios/drivers/audio_dac.h diff --git a/quantum/audio/driver_chibios_dac_additive.c b/platforms/chibios/drivers/audio_dac_additive.c similarity index 100% rename from quantum/audio/driver_chibios_dac_additive.c rename to platforms/chibios/drivers/audio_dac_additive.c diff --git a/quantum/audio/driver_chibios_dac_basic.c b/platforms/chibios/drivers/audio_dac_basic.c similarity index 100% rename from quantum/audio/driver_chibios_dac_basic.c rename to platforms/chibios/drivers/audio_dac_basic.c diff --git a/quantum/audio/driver_chibios_pwm.h b/platforms/chibios/drivers/audio_pwm.h similarity index 100% rename from quantum/audio/driver_chibios_pwm.h rename to platforms/chibios/drivers/audio_pwm.h diff --git a/quantum/audio/driver_chibios_pwm_hardware.c b/platforms/chibios/drivers/audio_pwm_hardware.c similarity index 100% rename from quantum/audio/driver_chibios_pwm_hardware.c rename to platforms/chibios/drivers/audio_pwm_hardware.c diff --git a/quantum/audio/driver_chibios_pwm_software.c b/platforms/chibios/drivers/audio_pwm_software.c similarity index 100% rename from quantum/audio/driver_chibios_pwm_software.c rename to platforms/chibios/drivers/audio_pwm_software.c diff --git a/quantum/audio/audio.h b/quantum/audio/audio.h index 56b9158a1a..290d461f5a 100644 --- a/quantum/audio/audio.h +++ b/quantum/audio/audio.h @@ -26,17 +26,12 @@ #if defined(__AVR__) # include -# if defined(AUDIO_DRIVER_PWM) -# include "driver_avr_pwm.h" -# endif #endif -#if defined(PROTOCOL_CHIBIOS) -# if defined(AUDIO_DRIVER_PWM) -# include "driver_chibios_pwm.h" -# elif defined(AUDIO_DRIVER_DAC) -# include "driver_chibios_dac.h" -# endif +#if defined(AUDIO_DRIVER_PWM) +# include "audio_pwm.h" +#elif defined(AUDIO_DRIVER_DAC) +# include "audio_dac.h" #endif typedef union { From 4782e038d9de07aaead294579176c28b4e8451bc Mon Sep 17 00:00:00 2001 From: remanifest <43574909+remanifest@users.noreply.github.com> Date: Tue, 5 Oct 2021 20:58:40 -0500 Subject: [PATCH 199/595] Added semicolons to rules.mk to allow symlinks from /bin/sh to /bin/zsh to complete the filesize check without error. (#14718) Co-authored-by: John Beard --- tmk_core/rules.mk | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tmk_core/rules.mk b/tmk_core/rules.mk index fd59fa032a..5a629d1eb0 100644 --- a/tmk_core/rules.mk +++ b/tmk_core/rules.mk @@ -479,8 +479,8 @@ check-size: $(PRINT_WARNING_PLAIN); printf " * $(MSG_FILE_NEAR_LIMIT)"; \ else \ $(PRINT_OK); $(SILENT) || printf " * $(MSG_FILE_JUST_RIGHT)"; \ - fi \ - fi \ + fi ; \ + fi ; \ fi else check-size: From c33491d72b6a0da0b589c36200e983a150a0e415 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Wed, 6 Oct 2021 05:53:53 +0000 Subject: [PATCH 200/595] MelGeek Mach80: correct Configurator layout (#14716) Adds a 0.5u gap between the top two rows. --- keyboards/melgeek/mach80/info.json | 350 ++++++++++++++--------------- 1 file changed, 175 insertions(+), 175 deletions(-) diff --git a/keyboards/melgeek/mach80/info.json b/keyboards/melgeek/mach80/info.json index e786df7c17..ea7c628c6f 100755 --- a/keyboards/melgeek/mach80/info.json +++ b/keyboards/melgeek/mach80/info.json @@ -4,192 +4,192 @@ "maintainer": "melgeek001365", "layouts": { "LAYOUT_tkl_ansi": { - "layout": [ - {"x":0, "y":0}, - {"x":2, "y":0}, - {"x":3, "y":0}, - {"x":4, "y":0}, - {"x":5, "y":0}, - {"x":6.5, "y":0}, - {"x":7.5, "y":0}, - {"x":8.5, "y":0}, - {"x":9.5, "y":0}, - {"x":11, "y":0}, - {"x":12, "y":0}, - {"x":13, "y":0}, - {"x":14, "y":0}, - {"x":15.25, "y":0}, - {"x":16.25, "y":0}, - {"x":17.25, "y":0}, + "layout": [ + {"x": 0, "y": 0}, + {"x": 2, "y": 0}, + {"x": 3, "y": 0}, + {"x": 4, "y": 0}, + {"x": 5, "y": 0}, + {"x": 6.5, "y": 0}, + {"x": 7.5, "y": 0}, + {"x": 8.5, "y": 0}, + {"x": 9.5, "y": 0}, + {"x": 11, "y": 0}, + {"x": 12, "y": 0}, + {"x": 13, "y": 0}, + {"x": 14, "y": 0}, + {"x": 15.25, "y": 0}, + {"x": 16.25, "y": 0}, + {"x": 17.25, "y": 0}, - {"x":0, "y":1}, - {"x":1, "y":1}, - {"x":2, "y":1}, - {"x":3, "y":1}, - {"x":4, "y":1}, - {"x":5, "y":1}, - {"x":6, "y":1}, - {"x":7, "y":1}, - {"x":8, "y":1}, - {"x":9, "y":1}, - {"x":10, "y":1}, - {"x":11, "y":1}, - {"x":12, "y":1}, - {"x":13, "y":1, "w":2.0}, - {"x":15.25, "y":1}, - {"x":16.25, "y":1}, - {"x":17.25, "y":1}, + {"x": 0, "y": 1.5}, + {"x": 1, "y": 1.5}, + {"x": 2, "y": 1.5}, + {"x": 3, "y": 1.5}, + {"x": 4, "y": 1.5}, + {"x": 5, "y": 1.5}, + {"x": 6, "y": 1.5}, + {"x": 7, "y": 1.5}, + {"x": 8, "y": 1.5}, + {"x": 9, "y": 1.5}, + {"x": 10, "y": 1.5}, + {"x": 11, "y": 1.5}, + {"x": 12, "y": 1.5}, + {"x": 13, "y": 1.5, "w": 2.0}, + {"x": 15.25, "y": 1.5}, + {"x": 16.25, "y": 1.5}, + {"x": 17.25, "y": 1.5}, - {"x":0, "y":2, "w":1.5}, - {"x":1.5, "y":2}, - {"x":2.5, "y":2}, - {"x":3.5, "y":2}, - {"x":4.5, "y":2}, - {"x":5.5, "y":2}, - {"x":6.5, "y":2}, - {"x":7.5, "y":2}, - {"x":8.5, "y":2}, - {"x":9.5, "y":2}, - {"x":10.5, "y":2}, - {"x":11.5, "y":2}, - {"x":12.5, "y":2}, - {"x":13.5, "y":2, "w":1.5}, - {"x":15.25, "y":2}, - {"x":16.25, "y":2}, - {"x":17.25, "y":2}, + {"x": 0, "y": 2.5, "w": 1.5}, + {"x": 1.5, "y": 2.5}, + {"x": 2.5, "y": 2.5}, + {"x": 3.5, "y": 2.5}, + {"x": 4.5, "y": 2.5}, + {"x": 5.5, "y": 2.5}, + {"x": 6.5, "y": 2.5}, + {"x": 7.5, "y": 2.5}, + {"x": 8.5, "y": 2.5}, + {"x": 9.5, "y": 2.5}, + {"x": 10.5, "y": 2.5}, + {"x": 11.5, "y": 2.5}, + {"x": 12.5, "y": 2.5}, + {"x": 13.5, "y": 2.5, "w": 1.5}, + {"x": 15.25, "y": 2.5}, + {"x": 16.25, "y": 2.5}, + {"x": 17.25, "y": 2.5}, - {"x":0, "y":3, "w":1.75}, - {"x":1.75, "y":3}, - {"x":2.75, "y":3}, - {"x":3.75, "y":3}, - {"x":4.75, "y":3}, - {"x":5.75, "y":3}, - {"x":6.75, "y":3}, - {"x":7.75, "y":3}, - {"x":8.75, "y":3}, - {"x":9.75, "y":3}, - {"x":10.75, "y":3}, - {"x":11.75, "y":3}, - {"x":12.75, "y":3, "w":2.25}, - - {"x":0, "y":4, "w":2.25}, - {"x":2.25, "y":4}, - {"x":3.25, "y":4}, - {"x":4.25, "y":4}, - {"x":5.25, "y":4}, - {"x":6.25, "y":4}, - {"x":7.25, "y":4}, - {"x":8.25, "y":4}, - {"x":9.25, "y":4}, - {"x":10.25, "y":4}, - {"x":11.25, "y":4}, - {"x":12.25, "y":4, "w":2.75}, - {"x":16.25, "y":4}, + {"x": 0, "y": 3.5, "w": 1.75}, + {"x": 1.75, "y": 3.5}, + {"x": 2.75, "y": 3.5}, + {"x": 3.75, "y": 3.5}, + {"x": 4.75, "y": 3.5}, + {"x": 5.75, "y": 3.5}, + {"x": 6.75, "y": 3.5}, + {"x": 7.75, "y": 3.5}, + {"x": 8.75, "y": 3.5}, + {"x": 9.75, "y": 3.5}, + {"x": 10.75, "y": 3.5}, + {"x": 11.75, "y": 3.5}, + {"x": 12.75, "y": 3.5, "w": 2.25}, - {"x":0, "y":5, "w":1.25}, - {"x":1.25, "y":5, "w":1.25}, - {"x":2.5, "y":5, "w":1.25}, - {"x":3.75, "y":5, "w":6.25}, - {"x":10, "y":5, "w":1.25}, - {"x":11.25, "y":5, "w":1.25}, - {"x":12.5, "y":5, "w":1.25}, - {"x":13.75, "y":5, "w":1.25}, - {"x":15.25, "y":5}, - {"x":16.25, "y":5}, - {"x":17.25, "y":5} + {"x": 0, "y": 4.5, "w": 2.25}, + {"x": 2.25, "y": 4.5}, + {"x": 3.25, "y": 4.5}, + {"x": 4.25, "y": 4.5}, + {"x": 5.25, "y": 4.5}, + {"x": 6.25, "y": 4.5}, + {"x": 7.25, "y": 4.5}, + {"x": 8.25, "y": 4.5}, + {"x": 9.25, "y": 4.5}, + {"x": 10.25, "y": 4.5}, + {"x": 11.25, "y": 4.5}, + {"x": 12.25, "y": 4.5, "w": 2.75}, + {"x": 16.25, "y": 4.5}, + + {"x": 0, "y": 5.5, "w": 1.25}, + {"x": 1.25, "y": 5.5, "w": 1.25}, + {"x": 2.5, "y": 5.5, "w": 1.25}, + {"x": 3.75, "y": 5.5, "w": 6.25}, + {"x": 10, "y": 5.5, "w": 1.25}, + {"x": 11.25, "y": 5.5, "w": 1.25}, + {"x": 12.5, "y": 5.5, "w": 1.25}, + {"x": 13.75, "y": 5.5, "w": 1.25}, + {"x": 15.25, "y": 5.5}, + {"x": 16.25, "y": 5.5}, + {"x": 17.25, "y": 5.5} ] }, "LAYOUT_tkl_ansi_wkl": { - "layout": [ - {"x":0, "y":0}, - {"x":2, "y":0}, - {"x":3, "y":0}, - {"x":4, "y":0}, - {"x":5, "y":0}, - {"x":6.5, "y":0}, - {"x":7.5, "y":0}, - {"x":8.5, "y":0}, - {"x":9.5, "y":0}, - {"x":11, "y":0}, - {"x":12, "y":0}, - {"x":13, "y":0}, - {"x":14, "y":0}, - {"x":15.25, "y":0}, - {"x":16.25, "y":0}, - {"x":17.25, "y":0}, + "layout": [ + {"x": 0, "y": 0}, + {"x": 2, "y": 0}, + {"x": 3, "y": 0}, + {"x": 4, "y": 0}, + {"x": 5, "y": 0}, + {"x": 6.5, "y": 0}, + {"x": 7.5, "y": 0}, + {"x": 8.5, "y": 0}, + {"x": 9.5, "y": 0}, + {"x": 11, "y": 0}, + {"x": 12, "y": 0}, + {"x": 13, "y": 0}, + {"x": 14, "y": 0}, + {"x": 15.25, "y": 0}, + {"x": 16.25, "y": 0}, + {"x": 17.25, "y": 0}, + + {"x": 0, "y": 1.5}, + {"x": 1, "y": 1.5}, + {"x": 2, "y": 1.5}, + {"x": 3, "y": 1.5}, + {"x": 4, "y": 1.5}, + {"x": 5, "y": 1.5}, + {"x": 6, "y": 1.5}, + {"x": 7, "y": 1.5}, + {"x": 8, "y": 1.5}, + {"x": 9, "y": 1.5}, + {"x": 10, "y": 1.5}, + {"x": 11, "y": 1.5}, + {"x": 12, "y": 1.5}, + {"x": 13, "y": 1.5, "w": 2.0}, + {"x": 15.25, "y": 1.5}, + {"x": 16.25, "y": 1.5}, + {"x": 17.25, "y": 1.5}, - {"x":0, "y":1}, - {"x":1, "y":1}, - {"x":2, "y":1}, - {"x":3, "y":1}, - {"x":4, "y":1}, - {"x":5, "y":1}, - {"x":6, "y":1}, - {"x":7, "y":1}, - {"x":8, "y":1}, - {"x":9, "y":1}, - {"x":10, "y":1}, - {"x":11, "y":1}, - {"x":12, "y":1}, - {"x":13, "y":1, "w":2.0}, - {"x":15.25, "y":1}, - {"x":16.25, "y":1}, - {"x":17.25, "y":1}, + {"x": 0, "y": 2.5, "w": 1.5}, + {"x": 1.5, "y": 2.5}, + {"x": 2.5, "y": 2.5}, + {"x": 3.5, "y": 2.5}, + {"x": 4.5, "y": 2.5}, + {"x": 5.5, "y": 2.5}, + {"x": 6.5, "y": 2.5}, + {"x": 7.5, "y": 2.5}, + {"x": 8.5, "y": 2.5}, + {"x": 9.5, "y": 2.5}, + {"x": 10.5, "y": 2.5}, + {"x": 11.5, "y": 2.5}, + {"x": 12.5, "y": 2.5}, + {"x": 13.5, "y": 2.5, "w": 1.5}, + {"x": 15.25, "y": 2.5}, + {"x": 16.25, "y": 2.5}, + {"x": 17.25, "y": 2.5}, - {"x":0, "y":2, "w":1.5}, - {"x":1.5, "y":2}, - {"x":2.5, "y":2}, - {"x":3.5, "y":2}, - {"x":4.5, "y":2}, - {"x":5.5, "y":2}, - {"x":6.5, "y":2}, - {"x":7.5, "y":2}, - {"x":8.5, "y":2}, - {"x":9.5, "y":2}, - {"x":10.5, "y":2}, - {"x":11.5, "y":2}, - {"x":12.5, "y":2}, - {"x":13.5, "y":2, "w":1.5}, - {"x":15.25, "y":2}, - {"x":16.25, "y":2}, - {"x":17.25, "y":2}, + {"x": 0, "y": 3.5, "w": 1.75}, + {"x": 1.75, "y": 3.5}, + {"x": 2.75, "y": 3.5}, + {"x": 3.75, "y": 3.5}, + {"x": 4.75, "y": 3.5}, + {"x": 5.75, "y": 3.5}, + {"x": 6.75, "y": 3.5}, + {"x": 7.75, "y": 3.5}, + {"x": 8.75, "y": 3.5}, + {"x": 9.75, "y": 3.5}, + {"x": 10.75, "y": 3.5}, + {"x": 11.75, "y": 3.5}, + {"x": 12.75, "y": 3.5, "w": 2.25}, - {"x":0, "y":3, "w":1.75}, - {"x":1.75, "y":3}, - {"x":2.75, "y":3}, - {"x":3.75, "y":3}, - {"x":4.75, "y":3}, - {"x":5.75, "y":3}, - {"x":6.75, "y":3}, - {"x":7.75, "y":3}, - {"x":8.75, "y":3}, - {"x":9.75, "y":3}, - {"x":10.75, "y":3}, - {"x":11.75, "y":3}, - {"x":12.75, "y":3, "w":2.25}, - - {"x":0, "y":4, "w":2.25}, - {"x":2.25, "y":4}, - {"x":3.25, "y":4}, - {"x":4.25, "y":4}, - {"x":5.25, "y":4}, - {"x":6.25, "y":4}, - {"x":7.25, "y":4}, - {"x":8.25, "y":4}, - {"x":9.25, "y":4}, - {"x":10.25, "y":4}, - {"x":11.25, "y":4}, - {"x":12.25, "y":4, "w":2.75}, - {"x":16.25, "y":4}, + {"x": 0, "y": 4.5, "w": 2.25}, + {"x": 2.25, "y": 4.5}, + {"x": 3.25, "y": 4.5}, + {"x": 4.25, "y": 4.5}, + {"x": 5.25, "y": 4.5}, + {"x": 6.25, "y": 4.5}, + {"x": 7.25, "y": 4.5}, + {"x": 8.25, "y": 4.5}, + {"x": 9.25, "y": 4.5}, + {"x": 10.25, "y": 4.5}, + {"x": 11.25, "y": 4.5}, + {"x": 12.25, "y": 4.5, "w": 2.75}, + {"x": 16.25, "y": 4.5}, - {"x":0, "y":5, "w":1.5}, - {"x":2.5, "y":5, "w":1.5}, - {"x":4, "y":5, "w":7}, - {"x":11, "y":5, "w":1.5}, - {"x":13.5, "y":5, "w":1.5}, - {"x":15.25, "y":5}, - {"x":16.25, "y":5}, - {"x":17.25, "y":5} + {"x": 0, "y": 5.5, "w": 1.5}, + {"x": 2.5, "y": 5.5, "w": 1.5}, + {"x": 4, "y": 5.5, "w": 7}, + {"x": 11, "y": 5.5, "w": 1.5}, + {"x": 13.5, "y": 5.5, "w": 1.5}, + {"x": 15.25, "y": 5.5}, + {"x": 16.25, "y": 5.5}, + {"x": 17.25, "y": 5.5} ] } } From d8f0c8783a0da2e5f49d10bb0119a5be7bb4b261 Mon Sep 17 00:00:00 2001 From: Ryan Date: Wed, 6 Oct 2021 19:34:46 +1100 Subject: [PATCH 201/595] Remove sysex API (#14723) --- common_features.mk | 8 - docs/faq_misc.md | 2 +- docs/getting_started_make_guide.md | 4 - .../community/ergodox/jackhumbert/keymap.c | 5 - quantum/api.c | 182 ------------------ quantum/api.h | 55 ------ quantum/api/api_sysex.c | 72 ------- quantum/api/api_sysex.h | 25 --- quantum/quantum.c | 23 +-- quantum/quantum.h | 2 - show_options.mk | 1 - tmk_core/protocol/lufa/lufa.h | 11 -- tmk_core/protocol/midi/qmk_midi.c | 41 ---- users/nstickney/rules.mk | 1 - 14 files changed, 7 insertions(+), 425 deletions(-) delete mode 100644 quantum/api.c delete mode 100644 quantum/api.h delete mode 100644 quantum/api/api_sysex.c delete mode 100644 quantum/api/api_sysex.h diff --git a/common_features.mk b/common_features.mk index d7b0f826aa..e3b42a9614 100644 --- a/common_features.mk +++ b/common_features.mk @@ -46,14 +46,6 @@ else ifeq ($(strip $(DEBUG_MATRIX_SCAN_RATE_ENABLE)), api) OPT_DEFS += -DDEBUG_MATRIX_SCAN_RATE endif -ifeq ($(strip $(API_SYSEX_ENABLE)), yes) - OPT_DEFS += -DAPI_SYSEX_ENABLE - OPT_DEFS += -DAPI_ENABLE - MIDI_ENABLE=yes - SRC += $(QUANTUM_DIR)/api/api_sysex.c - SRC += $(QUANTUM_DIR)/api.c -endif - ifeq ($(strip $(COMMAND_ENABLE)), yes) SRC += $(QUANTUM_DIR)/command.c OPT_DEFS += -DCOMMAND_ENABLE diff --git a/docs/faq_misc.md b/docs/faq_misc.md index 9ab2b69a80..41d17906bf 100644 --- a/docs/faq_misc.md +++ b/docs/faq_misc.md @@ -36,7 +36,7 @@ Size after: can retry, loading that one - Some of the options you might specify in your keyboard's Makefile consume extra memory; watch out for BOOTMAGIC_ENABLE, - MOUSEKEY_ENABLE, EXTRAKEY_ENABLE, CONSOLE_ENABLE, API_SYSEX_ENABLE + MOUSEKEY_ENABLE, EXTRAKEY_ENABLE, CONSOLE_ENABLE - DFU tools do /not/ allow you to write into the bootloader (unless you throw in an extra fruit salad of options), so there is little risk there. diff --git a/docs/getting_started_make_guide.md b/docs/getting_started_make_guide.md index 70390a5105..deef7520e5 100644 --- a/docs/getting_started_make_guide.md +++ b/docs/getting_started_make_guide.md @@ -125,10 +125,6 @@ This allows you output audio on the C6 pin (needs abstracting). See the [audio p Use this to debug changes to variable values, see the [tracing variables](unit_testing.md#tracing-variables) section of the Unit Testing page for more information. -`API_SYSEX_ENABLE` - -This enables using the Quantum SYSEX API to send strings (somewhere?) - `KEY_LOCK_ENABLE` This enables [key lock](feature_key_lock.md). diff --git a/layouts/community/ergodox/jackhumbert/keymap.c b/layouts/community/ergodox/jackhumbert/keymap.c index 745d632d02..9d357881e2 100644 --- a/layouts/community/ergodox/jackhumbert/keymap.c +++ b/layouts/community/ergodox/jackhumbert/keymap.c @@ -85,11 +85,6 @@ const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) eeconfig_init(); } break; - case 2: - if (record->event.pressed) { // For resetting EEPROM - api_send_unicode(0x0CA0); - } - break; } return MACRO_NONE; }; diff --git a/quantum/api.c b/quantum/api.c deleted file mode 100644 index 1685744589..0000000000 --- a/quantum/api.c +++ /dev/null @@ -1,182 +0,0 @@ -/* Copyright 2016 Jack Humbert - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include "api.h" -#include "quantum.h" - -void dword_to_bytes(uint32_t dword, uint8_t* bytes) { - bytes[0] = (dword >> 24) & 0xFF; - bytes[1] = (dword >> 16) & 0xFF; - bytes[2] = (dword >> 8) & 0xFF; - bytes[3] = (dword >> 0) & 0xFF; -} - -uint32_t bytes_to_dword(uint8_t* bytes, uint8_t index) { return ((uint32_t)bytes[index + 0] << 24) | ((uint32_t)bytes[index + 1] << 16) | ((uint32_t)bytes[index + 2] << 8) | (uint32_t)bytes[index + 3]; } - -__attribute__((weak)) bool process_api_quantum(uint8_t length, uint8_t* data) { return process_api_keyboard(length, data); } - -__attribute__((weak)) bool process_api_keyboard(uint8_t length, uint8_t* data) { return process_api_user(length, data); } - -__attribute__((weak)) bool process_api_user(uint8_t length, uint8_t* data) { return true; } - -void process_api(uint16_t length, uint8_t* data) { - // SEND_STRING("\nRX: "); - // for (uint8_t i = 0; i < length; i++) { - // send_byte(data[i]); - // SEND_STRING(" "); - // } - if (!process_api_quantum(length, data)) return; - - switch (data[0]) { - case MT_SET_DATA: - switch (data[1]) { - case DT_DEFAULT_LAYER: { - eeconfig_update_default_layer(data[2]); - default_layer_set((uint32_t)(data[2])); - break; - } - case DT_KEYMAP_OPTIONS: { - eeconfig_update_keymap(data[2]); - break; - } - case DT_RGBLIGHT: { -#ifdef RGBLIGHT_ENABLE - uint32_t rgblight = bytes_to_dword(data, 2); - eeconfig_update_rgblight(rgblight); -#endif - break; - } - } - case MT_GET_DATA: - switch (data[1]) { - case DT_HANDSHAKE: { - MT_GET_DATA_ACK(DT_HANDSHAKE, NULL, 0); - break; - } - case DT_DEBUG: { - uint8_t debug_bytes[1] = {eeprom_read_byte(EECONFIG_DEBUG)}; - MT_GET_DATA_ACK(DT_DEBUG, debug_bytes, 1); - break; - } - case DT_DEFAULT_LAYER: { - uint8_t default_bytes[1] = {eeprom_read_byte(EECONFIG_DEFAULT_LAYER)}; - MT_GET_DATA_ACK(DT_DEFAULT_LAYER, default_bytes, 1); - break; - } - case DT_CURRENT_LAYER: { - uint8_t layer_state_bytes[4]; - dword_to_bytes(layer_state, layer_state_bytes); - MT_GET_DATA_ACK(DT_CURRENT_LAYER, layer_state_bytes, 4); - break; - } - case DT_AUDIO: { -#ifdef AUDIO_ENABLE - uint8_t audio_bytes[1] = {eeprom_read_byte(EECONFIG_AUDIO)}; - MT_GET_DATA_ACK(DT_AUDIO, audio_bytes, 1); -#else - MT_GET_DATA_ACK(DT_AUDIO, NULL, 0); -#endif - break; - } - case DT_BACKLIGHT: { -#ifdef BACKLIGHT_ENABLE - uint8_t backlight_bytes[1] = {eeprom_read_byte(EECONFIG_BACKLIGHT)}; - MT_GET_DATA_ACK(DT_BACKLIGHT, backlight_bytes, 1); -#else - MT_GET_DATA_ACK(DT_BACKLIGHT, NULL, 0); -#endif - break; - } - case DT_RGBLIGHT: { -#ifdef RGBLIGHT_ENABLE - uint8_t rgblight_bytes[4]; - dword_to_bytes(eeconfig_read_rgblight(), rgblight_bytes); - MT_GET_DATA_ACK(DT_RGBLIGHT, rgblight_bytes, 4); -#else - MT_GET_DATA_ACK(DT_RGBLIGHT, NULL, 0); -#endif - break; - } - case DT_KEYMAP_OPTIONS: { - uint8_t keymap_bytes[1] = {eeconfig_read_keymap()}; - MT_GET_DATA_ACK(DT_KEYMAP_OPTIONS, keymap_bytes, 1); - break; - } - case DT_KEYMAP_SIZE: { - uint8_t keymap_size[2] = {MATRIX_ROWS, MATRIX_COLS}; - MT_GET_DATA_ACK(DT_KEYMAP_SIZE, keymap_size, 2); - break; - } - // This may be too much - // case DT_KEYMAP: { - // uint8_t keymap_data[MATRIX_ROWS * MATRIX_COLS * 4 + 3]; - // keymap_data[0] = data[2]; - // keymap_data[1] = MATRIX_ROWS; - // keymap_data[2] = MATRIX_COLS; - // for (int i = 0; i < MATRIX_ROWS; i++) { - // for (int j = 0; j < MATRIX_COLS; j++) { - // keymap_data[3 + (i*MATRIX_COLS*2) + (j*2)] = pgm_read_word(&keymaps[data[2]][i][j]) >> 8; - // keymap_data[3 + (i*MATRIX_COLS*2) + (j*2) + 1] = pgm_read_word(&keymaps[data[2]][i][j]) & 0xFF; - // } - // } - // MT_GET_DATA_ACK(DT_KEYMAP, keymap_data, MATRIX_ROWS * MATRIX_COLS * 4 + 3); - // // uint8_t keymap_data[5]; - // // keymap_data[0] = data[2]; - // // keymap_data[1] = data[3]; - // // keymap_data[2] = data[4]; - // // keymap_data[3] = pgm_read_word(&keymaps[data[2]][data[3]][data[4]]) >> 8; - // // keymap_data[4] = pgm_read_word(&keymaps[data[2]][data[3]][data[4]]) & 0xFF; - - // // MT_GET_DATA_ACK(DT_KEYMAP, keymap_data, 5); - // break; - // } - default: - break; - } - break; - case MT_SET_DATA_ACK: - case MT_GET_DATA_ACK: - break; - case MT_SEND_DATA: - break; - case MT_SEND_DATA_ACK: - break; - case MT_EXE_ACTION: - break; - case MT_EXE_ACTION_ACK: - break; - case MT_TYPE_ERROR: - break; - default:; // command not recognised - SEND_BYTES(MT_TYPE_ERROR, DT_NONE, data, length); - break; - - // #ifdef RGBLIGHT_ENABLE - // case 0x27: ; // RGB LED functions - // switch (*data++) { - // case 0x00: ; // Update HSV - // rgblight_sethsv((data[0] << 8 | data[1]) % 360, data[2], data[3]); - // break; - // case 0x01: ; // Update RGB - // break; - // case 0x02: ; // Update mode - // rgblight_mode(data[0]); - // break; - // } - // break; - // #endif - } -} diff --git a/quantum/api.h b/quantum/api.h deleted file mode 100644 index 0a30e9d6cc..0000000000 --- a/quantum/api.h +++ /dev/null @@ -1,55 +0,0 @@ -/* Copyright 2016 Jack Humbert - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -#ifdef __AVR__ -# include "lufa.h" -#endif - -enum MESSAGE_TYPE { - MT_GET_DATA = 0x10, // Get data from keyboard - MT_GET_DATA_ACK = 0x11, // returned data to process (ACK) - MT_SET_DATA = 0x20, // Set data on keyboard - MT_SET_DATA_ACK = 0x21, // returned data to confirm (ACK) - MT_SEND_DATA = 0x30, // Sending data/action from keyboard - MT_SEND_DATA_ACK = 0x31, // returned data/action confirmation (ACK) - MT_EXE_ACTION = 0x40, // executing actions on keyboard - MT_EXE_ACTION_ACK = 0x41, // return confirmation/value (ACK) - MT_TYPE_ERROR = 0x80 // type not recognised (ACK) -}; - -enum DATA_TYPE { DT_NONE = 0x00, DT_HANDSHAKE, DT_DEFAULT_LAYER, DT_CURRENT_LAYER, DT_KEYMAP_OPTIONS, DT_BACKLIGHT, DT_RGBLIGHT, DT_UNICODE, DT_DEBUG, DT_AUDIO, DT_QUANTUM_ACTION, DT_KEYBOARD_ACTION, DT_USER_ACTION, DT_KEYMAP_SIZE, DT_KEYMAP }; - -void dword_to_bytes(uint32_t dword, uint8_t* bytes); -uint32_t bytes_to_dword(uint8_t* bytes, uint8_t index); - -#define MT_GET_DATA(data_type, data, length) SEND_BYTES(MT_GET_DATA, data_type, data, length) -#define MT_GET_DATA_ACK(data_type, data, length) SEND_BYTES(MT_GET_DATA_ACK, data_type, data, length) -#define MT_SET_DATA(data_type, data, length) SEND_BYTES(MT_SET_DATA, data_type, data, length) -#define MT_SET_DATA_ACK(data_type, data, length) SEND_BYTES(MT_SET_DATA_ACK, data_type, data, length) -#define MT_SEND_DATA(data_type, data, length) SEND_BYTES(MT_SEND_DATA, data_type, data, length) -#define MT_SEND_DATA_ACK(data_type, data, length) SEND_BYTES(MT_SEND_DATA_ACK, data_type, data, length) -#define MT_EXE_ACTION(data_type, data, length) SEND_BYTES(MT_EXE_ACTION, data_type, data, length) -#define MT_EXE_ACTION_ACK(data_type, data, length) SEND_BYTES(MT_EXE_ACTION_ACK, data_type, data, length) - -void process_api(uint16_t length, uint8_t* data); - -__attribute__((weak)) bool process_api_quantum(uint8_t length, uint8_t* data); - -__attribute__((weak)) bool process_api_keyboard(uint8_t length, uint8_t* data); - -__attribute__((weak)) bool process_api_user(uint8_t length, uint8_t* data); diff --git a/quantum/api/api_sysex.c b/quantum/api/api_sysex.c deleted file mode 100644 index 07c90cf804..0000000000 --- a/quantum/api/api_sysex.c +++ /dev/null @@ -1,72 +0,0 @@ -/* Copyright 2016 Jack Humbert, Fred Sundvik - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "api_sysex.h" -#include "sysex_tools.h" -#include "print.h" -#include "qmk_midi.h" - -void send_bytes_sysex(uint8_t message_type, uint8_t data_type, uint8_t* bytes, uint16_t length) { - // SEND_STRING("\nTX: "); - // for (uint8_t i = 0; i < length; i++) { - // send_byte(bytes[i]); - // SEND_STRING(" "); - // } - if (length > API_SYSEX_MAX_SIZE) { - xprintf("Sysex msg too big %d %d %d", message_type, data_type, length); - return; - } - - // The buffer size required is calculated as the following - // API_SYSEX_MAX_SIZE is the maximum length - // In addition to that we have a two byte message header consisting of the message_type and data_type - // This has to be encoded with an additional overhead of one byte for every starting 7 bytes - // We just add one extra byte in case it's not divisible by 7 - // Then we have an unencoded header consisting of 4 bytes - // Plus a one byte terminator - const unsigned message_header = 2; - const unsigned unencoded_message = API_SYSEX_MAX_SIZE + message_header; - const unsigned encoding_overhead = unencoded_message / 7 + 1; - const unsigned encoded_size = unencoded_message + encoding_overhead; - const unsigned unencoded_header = 4; - const unsigned terminator = 1; - const unsigned buffer_size = encoded_size + unencoded_header + terminator; - uint8_t buffer[encoded_size + unencoded_header + terminator]; - // The unencoded header - buffer[0] = 0xF0; - buffer[1] = 0x00; - buffer[2] = 0x00; - buffer[3] = 0x00; - - // We copy the message to the end of the array, this way we can do an inplace encoding, using the same - // buffer for both input and output - const unsigned message_size = length + message_header; - uint8_t* unencoded_start = buffer + buffer_size - message_size; - uint8_t* ptr = unencoded_start; - *(ptr++) = message_type; - *(ptr++) = data_type; - memcpy(ptr, bytes, length); - - unsigned encoded_length = sysex_encode(buffer + unencoded_header, unencoded_start, message_size); - unsigned final_size = unencoded_header + encoded_length + terminator; - buffer[final_size - 1] = 0xF7; - midi_send_array(&midi_device, final_size, buffer); - - // SEND_STRING("\nTD: "); - // for (uint8_t i = 0; i < encoded_length + 5; i++) { - // send_byte(buffer[i]); - // SEND_STRING(" "); - // } -} diff --git a/quantum/api/api_sysex.h b/quantum/api/api_sysex.h deleted file mode 100644 index eb0a18848d..0000000000 --- a/quantum/api/api_sysex.h +++ /dev/null @@ -1,25 +0,0 @@ -/* Copyright 2016 Jack Humbert - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -#include "api.h" - -#define API_SYSEX_MAX_SIZE 32 - -void send_bytes_sysex(uint8_t message_type, uint8_t data_type, uint8_t* bytes, uint16_t length); - -#define SEND_BYTES(mt, dt, b, l) send_bytes_sysex(mt, dt, b, l) diff --git a/quantum/quantum.c b/quantum/quantum.c index 326c8370b1..ac8857df85 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -25,10 +25,6 @@ # include "backlight.h" #endif -#ifdef API_ENABLE -# include "api.h" -#endif - #ifdef MIDI_ENABLE # include "process_midi.h" #endif @@ -145,12 +141,13 @@ void reset_keyboard(void) { /* Convert record into usable keycode via the contained event. */ uint16_t get_record_keycode(keyrecord_t *record, bool update_layer_cache) { #ifdef COMBO_ENABLE - if (record->keycode) { return record->keycode; } + if (record->keycode) { + return record->keycode; + } #endif return get_event_keycode(record->event, update_layer_cache); } - /* Convert event into usable keycode. Checks the layer cache to ensure that it * retains the correct keycode after a layer change, if the key is still pressed. * "update_layer_cache" is to ensure that it only updates the layer cache when @@ -179,12 +176,12 @@ uint16_t get_event_keycode(keyevent_t event, bool update_layer_cache) { bool pre_process_record_quantum(keyrecord_t *record) { if (!( #ifdef COMBO_ENABLE - process_combo(get_record_keycode(record, true), record) && + process_combo(get_record_keycode(record, true), record) && #endif - true)) { + true)) { return false; } - return true; // continue processing + return true; // continue processing } /* Get keycode, and then call keyboard function */ @@ -468,14 +465,6 @@ void matrix_scan_quantum() { # include "hd44780.h" #endif -void api_send_unicode(uint32_t unicode) { -#ifdef API_ENABLE - uint8_t chunk[4]; - dword_to_bytes(unicode, chunk); - MT_SEND_DATA(DT_UNICODE, chunk, 5); -#endif -} - //------------------------------------------------------------------------------ // Override these functions in your keymap file to play different tunes on // different events such as startup and bootloader jump diff --git a/quantum/quantum.h b/quantum/quantum.h index 5cbe84d0c9..9250f5acce 100644 --- a/quantum/quantum.h +++ b/quantum/quantum.h @@ -237,5 +237,3 @@ void led_set_user(uint8_t usb_led); void led_set_kb(uint8_t usb_led); bool led_update_user(led_t led_state); bool led_update_kb(led_t led_state); - -void api_send_unicode(uint32_t unicode); diff --git a/show_options.mk b/show_options.mk index 2cae1cfa12..35fca9c6b0 100644 --- a/show_options.mk +++ b/show_options.mk @@ -40,7 +40,6 @@ OTHER_OPTION_NAMES = \ UCIS_ENABLE \ UNICODEMAP_ENABLE \ UNICODE_COMMON \ - API_SYSEX_ENABLE \ AUTO_SHIFT_ENABLE \ AUTO_SHIFT_MODIFIERS \ COMBO_ENABLE \ diff --git a/tmk_core/protocol/lufa/lufa.h b/tmk_core/protocol/lufa/lufa.h index 348a84c031..6a5205609e 100644 --- a/tmk_core/protocol/lufa/lufa.h +++ b/tmk_core/protocol/lufa/lufa.h @@ -56,14 +56,3 @@ extern host_driver_t lufa_driver; #ifdef __cplusplus } #endif - -#ifdef API_ENABLE -# include "api.h" -#endif - -#ifdef API_SYSEX_ENABLE -# include "api_sysex.h" -// Allocate space for encoding overhead. -// The header and terminator are not stored to save a few bytes of precious ram -# define MIDI_SYSEX_BUFFER (API_SYSEX_MAX_SIZE + API_SYSEX_MAX_SIZE / 7 + (API_SYSEX_MAX_SIZE % 7 ? 1 : 0)) -#endif diff --git a/tmk_core/protocol/midi/qmk_midi.c b/tmk_core/protocol/midi/qmk_midi.c index c18dbf9930..3a454d61ae 100644 --- a/tmk_core/protocol/midi/qmk_midi.c +++ b/tmk_core/protocol/midi/qmk_midi.c @@ -4,9 +4,6 @@ #include "midi.h" #include "usb_descriptor.h" #include "process_midi.h" -#if API_SYSEX_ENABLE -# include "api_sysex.h" -#endif /******************************************************************************* * MIDI @@ -124,41 +121,6 @@ static void cc_callback(MidiDevice* device, uint8_t chan, uint8_t num, uint8_t v // midi_send_cc(device, (chan + 1) % 16, num, val); } -#ifdef API_SYSEX_ENABLE -uint8_t midi_buffer[MIDI_SYSEX_BUFFER] = {0}; - -static void sysex_callback(MidiDevice* device, uint16_t start, uint8_t length, uint8_t* data) { - // SEND_STRING("\n"); - // send_word(start); - // SEND_STRING(": "); - // Don't store the header - int16_t pos = start - 4; - for (uint8_t place = 0; place < length; place++) { - // send_byte(*data); - if (pos >= 0) { - if (*data == 0xF7) { - // SEND_STRING("\nRD: "); - // for (uint8_t i = 0; i < start + place + 1; i++){ - // send_byte(midi_buffer[i]); - // SEND_STRING(" "); - // } - const unsigned decoded_length = sysex_decoded_length(pos); - uint8_t decoded[API_SYSEX_MAX_SIZE]; - sysex_decode(decoded, midi_buffer, pos); - process_api(decoded_length, decoded); - return; - } else if (pos >= MIDI_SYSEX_BUFFER) { - return; - } - midi_buffer[pos] = *data; - } - // SEND_STRING(" "); - data++; - pos++; - } -} -#endif - void midi_init(void); void setup_midi(void) { @@ -170,7 +132,4 @@ void setup_midi(void) { midi_device_set_pre_input_process_func(&midi_device, usb_get_midi); midi_register_fallthrough_callback(&midi_device, fallthrough_callback); midi_register_cc_callback(&midi_device, cc_callback); -#ifdef API_SYSEX_ENABLE - midi_register_sysex_callback(&midi_device, sysex_callback); -#endif } diff --git a/users/nstickney/rules.mk b/users/nstickney/rules.mk index 0f189e8a4f..6b3671ddb8 100644 --- a/users/nstickney/rules.mk +++ b/users/nstickney/rules.mk @@ -25,7 +25,6 @@ UCIS_ENABLE = no LTO_ENABLE = yes # https://beta.docs.qmk.fm/developing-qmk/qmk-reference/getting_started_make_guide#rules-mk-options -API_SYSEX_ENABLE = no AUDIO_ENABLE = no BOOTMAGIC_ENABLE = no COMMAND_ENABLE = no From f32db0bdd1f25099605ed324f1e8eab9aa7361e4 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Wed, 6 Oct 2021 08:44:57 +0000 Subject: [PATCH 202/595] Mode M65S touch-up (#14722) * add Configurator data * rename README.md to lowercase API can't find this file unless the filename is lowercase (`readme.md`). * readme touch-up Correct typos and improve some grammar and Markdown. --- keyboards/mode/m65s/info.json | 85 ++++++++++++++++++++ keyboards/mode/m65s/{README.md => readme.md} | 8 +- 2 files changed, 89 insertions(+), 4 deletions(-) create mode 100644 keyboards/mode/m65s/info.json rename keyboards/mode/m65s/{README.md => readme.md} (65%) diff --git a/keyboards/mode/m65s/info.json b/keyboards/mode/m65s/info.json new file mode 100644 index 0000000000..cb0cf8c12c --- /dev/null +++ b/keyboards/mode/m65s/info.json @@ -0,0 +1,85 @@ +{ + "keyboard_name": "Mode SixtyFive S", + "url": "", + "maintainer": "Gondolindrim", + "layouts": { + "LAYOUT_all": { + "layout": [ + { "label": "K00", "x": 0, "y": 0 }, + { "label": "K01", "x": 1, "y": 0 }, + { "label": "K02", "x": 2, "y": 0 }, + { "label": "K03", "x": 3, "y": 0 }, + { "label": "K04", "x": 4, "y": 0 }, + { "label": "K05", "x": 5, "y": 0 }, + { "label": "K06", "x": 6, "y": 0 }, + { "label": "K07", "x": 7, "y": 0 }, + { "label": "K08", "x": 8, "y": 0 }, + { "label": "K09", "x": 9, "y": 0 }, + { "label": "K0A", "x": 10, "y": 0 }, + { "label": "K0B", "x": 11, "y": 0 }, + { "label": "K0C", "x": 12, "y": 0 }, + { "label": "K0D", "x": 13, "y": 0 }, + { "label": "K0E", "x": 14, "y": 0 }, + { "label": "K0F", "x": 15, "y": 0 }, + + { "label": "K10", "x": 0, "y": 1, "w": 1.5 }, + { "label": "K11", "x": 1.5, "y": 1 }, + { "label": "K12", "x": 2.5, "y": 1 }, + { "label": "K13", "x": 3.5, "y": 1 }, + { "label": "K14", "x": 4.5, "y": 1 }, + { "label": "K15", "x": 5.5, "y": 1 }, + { "label": "K16", "x": 6.5, "y": 1 }, + { "label": "K17", "x": 7.5, "y": 1 }, + { "label": "K18", "x": 8.5, "y": 1 }, + { "label": "K19", "x": 9.5, "y": 1 }, + { "label": "K1A", "x": 10.5, "y": 1 }, + { "label": "K1B", "x": 11.5, "y": 1 }, + { "label": "K1C", "x": 12.5, "y": 1 }, + { "label": "K1E", "x": 13.5, "y": 1, "w": 1.5}, + { "label": "K1F", "x": 15, "y": 1 }, + + { "label": "K20", "x": 0, "y": 2, "w": 1.75 }, + { "label": "K21", "x": 1.75, "y": 2 }, + { "label": "K22", "x": 2.75, "y": 2 }, + { "label": "K23", "x": 3.75, "y": 2 }, + { "label": "K24", "x": 4.75, "y": 2 }, + { "label": "K25", "x": 5.75, "y": 2 }, + { "label": "K26", "x": 6.75, "y": 2 }, + { "label": "K27", "x": 7.75, "y": 2 }, + { "label": "K28", "x": 8.75, "y": 2 }, + { "label": "K29", "x": 9.75, "y": 2 }, + { "label": "K2A", "x": 10.75, "y": 2 }, + { "label": "K2B", "x": 11.75, "y": 2 }, + { "label": "K2D", "x": 12.75, "y": 2 }, + { "label": "K2E", "x": 13.75, "y": 2, "w": 1.25 }, + { "label": "K2F", "x": 15, "y": 2 }, + + { "label": "K30", "x": 0, "y": 3, "w": 1.25 }, + { "label": "K31", "x": 1.25, "y": 3 }, + { "label": "K32", "x": 2.25, "y": 3 }, + { "label": "K33", "x": 3.25, "y": 3 }, + { "label": "K34", "x": 4.25, "y": 3 }, + { "label": "K35", "x": 5.25, "y": 3 }, + { "label": "K36", "x": 6.25, "y": 3 }, + { "label": "K37", "x": 7.25, "y": 3 }, + { "label": "K38", "x": 8.25, "y": 3 }, + { "label": "K39", "x": 9.25, "y": 3 }, + { "label": "K3A", "x": 10.25, "y": 3 }, + { "label": "K3B", "x": 11.25, "y": 3 }, + { "label": "K3C", "x": 12.25, "y": 3, "w": 1.75 }, + { "label": "K3E", "x": 14, "y": 3 }, + { "label": "K3F", "x": 15, "y": 3 }, + + { "label": "K40", "x": 0, "y": 4, "w": 1.25 }, + { "label": "K41", "x": 1.25, "y": 4, "w": 1.25 }, + { "label": "K42", "x": 2.5, "y": 4, "w": 1.25 }, + { "label": "K56", "x": 3.75, "y": 4, "w": 6.25 }, + { "label": "K5A", "x": 10, "y": 4, "w": 1.25 }, + { "label": "K5B", "x": 11.25, "y": 4, "w": 1.25 }, + { "label": "K5D", "x": 13, "y": 4 }, + { "label": "K5E", "x": 14, "y": 4 }, + { "label": "K5F", "x": 15, "y": 4 } + ] + } + } +} diff --git a/keyboards/mode/m65s/README.md b/keyboards/mode/m65s/readme.md similarity index 65% rename from keyboards/mode/m65s/README.md rename to keyboards/mode/m65s/readme.md index 2fa0ed1681..92e0b8421e 100644 --- a/keyboards/mode/m65s/README.md +++ b/keyboards/mode/m65s/readme.md @@ -1,12 +1,12 @@ # Mode SixtyFive M65S -![MODE65](https://raw.githubusercontent.com/Gondolindrim/file_hosting/main/mode_sixtyfive/Group_95_1024x1024.jpg)\ +![MODE65](https://raw.githubusercontent.com/Gondolindrim/file_hosting/main/mode_sixtyfive/Group_95_1024x1024.jpg) -The M65S is the sodlerable PCB for the Mode SixtyFive keyboard, s sixty-five-percent high-end keyboard sold by [Mode Designs](https://shop.modedesigns.com/). +The M65S is the solderable PCB for the Mode SixtyFive keyboard, a sixty-five-percent high-end keyboard sold by [Mode Designs](https://shop.modedesigns.com/). -* Keyboard Maintainer: [Gondolindrim](https://github.com/gondolindrim) +* Keyboard Maintainer: [Gondolindrim](https://github.com/Gondolindrim) * Hardware Supported: proprietary PCB using STM32F401RBT6 controller -* Hardware Availability: you can get a Mode SixtyFive as of today (august. 2021) through the in stock sales or special groupbuy editions at https://shop.modedesigns.com/ +* Hardware Availability: you can get a Mode SixtyFive as of today (August 2021) through the in-stock sales or special group buy editions at [Mode Designs](https://shop.modedesigns.com/) Make example for this keyboard (after setting up your build environment): From d5fae3a6f96d44a432350d5f487204a962c5f9bc Mon Sep 17 00:00:00 2001 From: Grayson Carr <734415+gtg465x@users.noreply.github.com> Date: Wed, 6 Oct 2021 11:36:04 -0400 Subject: [PATCH 203/595] Updated Keychron Q1 user keymap (#14666) * Updated Keychron Q1 user keymap - Added Caps Lock indicator - Mission Control and Launchpad custom keycodes are now defined using the VIA user keycodes range so they can be labeled properly in VIA * Only use VIA keycode range if VIA is enabled * Reformatted led_indexes enum to match layout * Feature: When the Fn layer is active, RGB lighting turns off for keys that are not assigned * Fixes * Cleanup: Updated method signature of rgb_matrix_set_color_by_keycode to more closely match rgb_matrix_set_color * Fixed int sizing for keycodes --- .../q1/rev_0100/keymaps/gtg465x/README.md | 17 +++++ .../q1/rev_0100/keymaps/gtg465x/config.h | 8 ++- .../q1/rev_0100/keymaps/gtg465x/keymap.c | 28 +++++--- .../q1/rev_0100/keymaps/gtg465x/keymap_user.h | 28 ++++++++ .../keymaps/gtg465x/rgb_matrix_user.c | 71 +++++++++++++++++++ .../keymaps/gtg465x/rgb_matrix_user.h | 24 +++++++ .../q1/rev_0100/keymaps/gtg465x/rules.mk | 4 ++ 7 files changed, 169 insertions(+), 11 deletions(-) create mode 100644 keyboards/keychron/q1/rev_0100/keymaps/gtg465x/keymap_user.h create mode 100644 keyboards/keychron/q1/rev_0100/keymaps/gtg465x/rgb_matrix_user.c create mode 100644 keyboards/keychron/q1/rev_0100/keymaps/gtg465x/rgb_matrix_user.h diff --git a/keyboards/keychron/q1/rev_0100/keymaps/gtg465x/README.md b/keyboards/keychron/q1/rev_0100/keymaps/gtg465x/README.md index c10416e690..c2d5799bb8 100644 --- a/keyboards/keychron/q1/rev_0100/keymaps/gtg465x/README.md +++ b/keyboards/keychron/q1/rev_0100/keymaps/gtg465x/README.md @@ -2,3 +2,20 @@ - On macOS, F3 opens Mission Control and F4 opens Launchpad without needing to configure shortcuts in System Preferences - RGB lighting turns off when the computer sleeps +- Caps Lock and alpha keys turn red to indicate when Caps Lock is on +- When the Fn layer is active, RGB lighting turns off for keys that are not assigned + +## Changelog + +### 10/3/2021 - 1.0.3 + +- Feature: When the Fn layer is active, RGB lighting turns off for keys that are not assigned + +### 10/1/2021 - 1.0.2 + +- Added Caps Lock indicator (my implementation is different, but this was inspired by mkillewald) +- Mission Control and Launchpad custom keycodes are now defined using the VIA user keycodes range so they can be labeled properly in VIA + +### 9/28/2021 - 1.0.1 + +- Initial release diff --git a/keyboards/keychron/q1/rev_0100/keymaps/gtg465x/config.h b/keyboards/keychron/q1/rev_0100/keymaps/gtg465x/config.h index 3a20f0b008..5ac05d04c1 100644 --- a/keyboards/keychron/q1/rev_0100/keymaps/gtg465x/config.h +++ b/keyboards/keychron/q1/rev_0100/keymaps/gtg465x/config.h @@ -16,6 +16,10 @@ #pragma once - /* RGB Matrix Configuration */ -#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended +#ifdef RGB_MATRIX_ENABLE +# define RGB_DISABLE_WHEN_USB_SUSPENDED +# define CAPS_LOCK_INDICATOR_COLOR RGB_RED +# define CAPS_LOCK_INDICATOR_LIGHT_ALPHAS +# define FN_LAYER_TRANSPARENT_KEYS_OFF +#endif diff --git a/keyboards/keychron/q1/rev_0100/keymaps/gtg465x/keymap.c b/keyboards/keychron/q1/rev_0100/keymaps/gtg465x/keymap.c index 79ef0bf86b..7f806f6b45 100644 --- a/keyboards/keychron/q1/rev_0100/keymaps/gtg465x/keymap.c +++ b/keyboards/keychron/q1/rev_0100/keymaps/gtg465x/keymap.c @@ -15,18 +15,20 @@ */ #include QMK_KEYBOARD_H +#include "keymap_user.h" +#ifdef RGB_MATRIX_ENABLE +# include "rgb_matrix_user.h" +#endif - -enum layers{ - MAC_BASE, - MAC_FN, - WIN_BASE, - WIN_FN -}; +// clang-format off enum custom_keycodes { - KC_MISSION_CONTROL = SAFE_RANGE, - KC_LAUNCHPAD +#ifdef VIA_ENABLE + KC_MISSION_CONTROL = USER00, +#else + KC_MISSION_CONTROL = SAFE_RANGE, +#endif + KC_LAUNCHPAD }; #define KC_MCTL KC_MISSION_CONTROL @@ -70,6 +72,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; +// clang-format on + +void matrix_init_user(void) { +#ifdef RGB_MATRIX_ENABLE + rgb_matrix_init_user(); +#endif +} + bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { case KC_MISSION_CONTROL: diff --git a/keyboards/keychron/q1/rev_0100/keymaps/gtg465x/keymap_user.h b/keyboards/keychron/q1/rev_0100/keymaps/gtg465x/keymap_user.h new file mode 100644 index 0000000000..728114d556 --- /dev/null +++ b/keyboards/keychron/q1/rev_0100/keymaps/gtg465x/keymap_user.h @@ -0,0 +1,28 @@ +/* Copyright 2021 @ Grayson Carr + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +// clang-format off + +enum layers { + MAC_BASE, + MAC_FN, + WIN_BASE, + WIN_FN +}; + +// clang-format on diff --git a/keyboards/keychron/q1/rev_0100/keymaps/gtg465x/rgb_matrix_user.c b/keyboards/keychron/q1/rev_0100/keymaps/gtg465x/rgb_matrix_user.c new file mode 100644 index 0000000000..9bc7231ece --- /dev/null +++ b/keyboards/keychron/q1/rev_0100/keymaps/gtg465x/rgb_matrix_user.c @@ -0,0 +1,71 @@ +/* Copyright 2021 @ Grayson Carr + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H +#include "rgb_matrix_user.h" +#include "keymap_user.h" + +keypos_t led_index_key_position[DRIVER_LED_TOTAL]; + +void rgb_matrix_init_user(void) { + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + for (uint8_t col = 0; col < MATRIX_COLS; col++) { + uint8_t led_index = g_led_config.matrix_co[row][col]; + if (led_index != NO_LED) { + led_index_key_position[led_index] = (keypos_t){.row = row, .col = col}; + } + } + } +} + +void rgb_matrix_indicators_advanced_user(uint8_t led_min, uint8_t led_max) { + uint8_t current_layer = get_highest_layer(layer_state); + switch (current_layer) { + case MAC_BASE: + case WIN_BASE: +#ifdef CAPS_LOCK_INDICATOR_COLOR + if (host_keyboard_led_state().caps_lock) { + rgb_matrix_set_color_by_keycode(led_min, led_max, current_layer, is_caps_lock_indicator, CAPS_LOCK_INDICATOR_COLOR); + } +#endif + break; + case MAC_FN: + case WIN_FN: +#ifdef FN_LAYER_TRANSPARENT_KEYS_OFF + rgb_matrix_set_color_by_keycode(led_min, led_max, current_layer, is_transparent, RGB_OFF); +#endif + break; + } +} + +void rgb_matrix_set_color_by_keycode(uint8_t led_min, uint8_t led_max, uint8_t layer, bool (*is_keycode)(uint16_t), uint8_t red, uint8_t green, uint8_t blue) { + for (uint8_t i = led_min; i < led_max; i++) { + uint16_t keycode = keymap_key_to_keycode(layer, led_index_key_position[i]); + if ((*is_keycode)(keycode)) { + rgb_matrix_set_color(i, red, green, blue); + } + } +} + +bool is_caps_lock_indicator(uint16_t keycode) { +#ifdef CAPS_LOCK_INDICATOR_LIGHT_ALPHAS + return (KC_A <= keycode && keycode <= KC_Z) || keycode == KC_CAPS; +#else + return keycode == KC_CAPS; +#endif +} + +bool is_transparent(uint16_t keycode) { return keycode == KC_TRNS; } diff --git a/keyboards/keychron/q1/rev_0100/keymaps/gtg465x/rgb_matrix_user.h b/keyboards/keychron/q1/rev_0100/keymaps/gtg465x/rgb_matrix_user.h new file mode 100644 index 0000000000..dead454167 --- /dev/null +++ b/keyboards/keychron/q1/rev_0100/keymaps/gtg465x/rgb_matrix_user.h @@ -0,0 +1,24 @@ +/* Copyright 2021 @ Grayson Carr + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +void rgb_matrix_init_user(void); + +void rgb_matrix_set_color_by_keycode(uint8_t led_min, uint8_t led_max, uint8_t layer, bool (*is_keycode)(uint16_t), uint8_t red, uint8_t green, uint8_t blue); + +bool is_caps_lock_indicator(uint16_t keycode); +bool is_transparent(uint16_t keycode); diff --git a/keyboards/keychron/q1/rev_0100/keymaps/gtg465x/rules.mk b/keyboards/keychron/q1/rev_0100/keymaps/gtg465x/rules.mk index 96d2d189b2..42ba38028d 100644 --- a/keyboards/keychron/q1/rev_0100/keymaps/gtg465x/rules.mk +++ b/keyboards/keychron/q1/rev_0100/keymaps/gtg465x/rules.mk @@ -1,2 +1,6 @@ VIA_ENABLE = yes MOUSEKEY_ENABLE = no + +ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes) + SRC += rgb_matrix_user.c +endif From bc1f5ef38172bc77a802fb779e5da60f800c231b Mon Sep 17 00:00:00 2001 From: Ryan Date: Thu, 7 Oct 2021 10:29:35 +1100 Subject: [PATCH 204/595] i2c_master: Add support for reading/writing to 16-bit registers (#14289) --- docs/i2c_driver.md | 48 +++++++++++++++++++++- platforms/avr/drivers/i2c_master.c | 56 ++++++++++++++++++++++++++ platforms/avr/drivers/i2c_master.h | 2 + platforms/chibios/drivers/i2c_master.c | 25 +++++++++++- platforms/chibios/drivers/i2c_master.h | 2 + 5 files changed, 130 insertions(+), 3 deletions(-) diff --git a/docs/i2c_driver.md b/docs/i2c_driver.md index 9017b44ed7..95c588af44 100644 --- a/docs/i2c_driver.md +++ b/docs/i2c_driver.md @@ -187,7 +187,7 @@ Receive multiple bytes from the selected SPI device. ### `i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout)` -Writes to a register on the I2C device. +Writes to a register with an 8-bit address on the I2C device. #### Arguments @@ -208,9 +208,32 @@ Writes to a register on the I2C device. --- +### `i2c_status_t i2c_writeReg16(uint8_t devaddr, uint16_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout)` + +Writes to a register with a 16-bit address (big endian) on the I2C device. + +#### Arguments + + - `uint8_t devaddr` + The 7-bit I2C address of the device. + - `uint16_t regaddr` + The register address to write to. + - `uint8_t *data` + A pointer to the data to transmit. + - `uint16_t length` + The number of bytes to write. Take care not to overrun the length of `data`. + - `uint16_t timeout` + The time in milliseconds to wait for a response from the target device. + +#### Return Value + +`I2C_STATUS_TIMEOUT` if the timeout period elapses, `I2C_STATUS_ERROR` if some other error occurs, otherwise `I2C_STATUS_SUCCESS`. + +--- + ### `i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout)` -Reads from a register on the I2C device. +Reads from a register with an 8-bit address on the I2C device. #### Arguments @@ -229,6 +252,27 @@ Reads from a register on the I2C device. --- +### `i2c_status_t i2c_readReg16(uint8_t devaddr, uint16_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout)` + +Reads from a register with a 16-bit address (big endian) on the I2C device. + +#### Arguments + + - `uint8_t devaddr` + The 7-bit I2C address of the device. + - `uint16_t regaddr` + The register address to read from. + - `uint16_t length` + The number of bytes to read. Take care not to overrun the length of `data`. + - `uint16_t timeout` + The time in milliseconds to wait for a response from the target device. + +#### Return Value + +`I2C_STATUS_TIMEOUT` if the timeout period elapses, `I2C_STATUS_ERROR` if some other error occurs, otherwise `I2C_STATUS_SUCCESS`. + +--- + ### `i2c_status_t i2c_stop(void)` Stop the current I2C transaction. diff --git a/platforms/avr/drivers/i2c_master.c b/platforms/avr/drivers/i2c_master.c index 2773e00778..111b55d6b0 100644 --- a/platforms/avr/drivers/i2c_master.c +++ b/platforms/avr/drivers/i2c_master.c @@ -202,6 +202,25 @@ i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, return status; } +i2c_status_t i2c_writeReg16(uint8_t devaddr, uint16_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout) { + i2c_status_t status = i2c_start(devaddr | 0x00, timeout); + if (status >= 0) { + status = i2c_write(regaddr >> 8, timeout); + + if (status >= 0) { + status = i2c_write(regaddr & 0xFF, timeout); + + for (uint16_t i = 0; i < length && status >= 0; i++) { + status = i2c_write(data[i], timeout); + } + } + } + + i2c_stop(); + + return status; +} + i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout) { i2c_status_t status = i2c_start(devaddr, timeout); if (status < 0) { @@ -235,6 +254,43 @@ error: return (status < 0) ? status : I2C_STATUS_SUCCESS; } +i2c_status_t i2c_readReg16(uint8_t devaddr, uint16_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout) { + i2c_status_t status = i2c_start(devaddr, timeout); + if (status < 0) { + goto error; + } + + status = i2c_write(regaddr >> 8, timeout); + if (status < 0) { + goto error; + } + status = i2c_write(regaddr & 0xFF, timeout); + if (status < 0) { + goto error; + } + + status = i2c_start(devaddr | 0x01, timeout); + + for (uint16_t i = 0; i < (length - 1) && status >= 0; i++) { + status = i2c_read_ack(timeout); + if (status >= 0) { + data[i] = status; + } + } + + if (status >= 0) { + status = i2c_read_nack(timeout); + if (status >= 0) { + data[(length - 1)] = status; + } + } + +error: + i2c_stop(); + + return (status < 0) ? status : I2C_STATUS_SUCCESS; +} + void i2c_stop(void) { // transmit STOP condition TWCR = (1 << TWINT) | (1 << TWEN) | (1 << TWSTO); diff --git a/platforms/avr/drivers/i2c_master.h b/platforms/avr/drivers/i2c_master.h index e5af73364b..2d95846db5 100644 --- a/platforms/avr/drivers/i2c_master.h +++ b/platforms/avr/drivers/i2c_master.h @@ -39,5 +39,7 @@ int16_t i2c_read_nack(uint16_t timeout); i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout); i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout); i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout); +i2c_status_t i2c_writeReg16(uint8_t devaddr, uint16_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout); i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout); +i2c_status_t i2c_readReg16(uint8_t devaddr, uint16_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout); void i2c_stop(void); diff --git a/platforms/chibios/drivers/i2c_master.c b/platforms/chibios/drivers/i2c_master.c index 981f6fa06d..312b4c7d0f 100644 --- a/platforms/chibios/drivers/i2c_master.c +++ b/platforms/chibios/drivers/i2c_master.c @@ -102,7 +102,7 @@ i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, i2cStart(&I2C_DRIVER, &i2cconfig); uint8_t complete_packet[length + 1]; - for (uint8_t i = 0; i < length; i++) { + for (uint16_t i = 0; i < length; i++) { complete_packet[i + 1] = data[i]; } complete_packet[0] = regaddr; @@ -111,6 +111,21 @@ i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, return chibios_to_qmk(&status); } +i2c_status_t i2c_writeReg16(uint8_t devaddr, uint16_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout) { + i2c_address = devaddr; + i2cStart(&I2C_DRIVER, &i2cconfig); + + uint8_t complete_packet[length + 2]; + for (uint16_t i = 0; i < length; i++) { + complete_packet[i + 2] = data[i]; + } + complete_packet[0] = regaddr >> 8; + complete_packet[1] = regaddr & 0xFF; + + msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), complete_packet, length + 2, 0, 0, TIME_MS2I(timeout)); + return chibios_to_qmk(&status); +} + i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout) { i2c_address = devaddr; i2cStart(&I2C_DRIVER, &i2cconfig); @@ -118,4 +133,12 @@ i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16 return chibios_to_qmk(&status); } +i2c_status_t i2c_readReg16(uint8_t devaddr, uint16_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout) { + i2c_address = devaddr; + i2cStart(&I2C_DRIVER, &i2cconfig); + uint8_t register_packet[2] = {regaddr >> 8, regaddr & 0xFF}; + msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), ®ister_packet, 2, data, length, TIME_MS2I(timeout)); + return chibios_to_qmk(&status); +} + void i2c_stop(void) { i2cStop(&I2C_DRIVER); } diff --git a/platforms/chibios/drivers/i2c_master.h b/platforms/chibios/drivers/i2c_master.h index ce32fd2457..5f082e9d1e 100644 --- a/platforms/chibios/drivers/i2c_master.h +++ b/platforms/chibios/drivers/i2c_master.h @@ -96,5 +96,7 @@ i2c_status_t i2c_start(uint8_t address); i2c_status_t i2c_transmit(uint8_t address, const uint8_t* data, uint16_t length, uint16_t timeout); i2c_status_t i2c_receive(uint8_t address, uint8_t* data, uint16_t length, uint16_t timeout); i2c_status_t i2c_writeReg(uint8_t devaddr, uint8_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout); +i2c_status_t i2c_writeReg16(uint8_t devaddr, uint16_t regaddr, const uint8_t* data, uint16_t length, uint16_t timeout); i2c_status_t i2c_readReg(uint8_t devaddr, uint8_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout); +i2c_status_t i2c_readReg16(uint8_t devaddr, uint16_t regaddr, uint8_t* data, uint16_t length, uint16_t timeout); void i2c_stop(void); From b2a186cf92d91bbb7f98fff68c4edf571909bf89 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Thu, 7 Oct 2021 10:57:48 +1100 Subject: [PATCH 205/595] Purge uGFX. (#14720) * Purge uGFX. * Remove remnants of visualizer. * Remove remnants of uGFX. --- .gitmodules | 4 - Makefile | 1 - build_keyboard.mk | 6 - common_features.mk | 4 - disable_features.mk | 1 - docs/es/hardware_drivers.md | 4 - docs/es/hardware_keyboard_guidelines.md | 2 - docs/fr-fr/getting_started_github.md | 1 - docs/getting_started_github.md | 1 - docs/hardware_drivers.md | 4 - docs/hardware_keyboard_guidelines.md | 2 - docs/he-il/getting_started_github.md | 1 - docs/ja/getting_started_github.md | 1 - docs/ja/hardware_drivers.md | 4 - docs/ja/hardware_keyboard_guidelines.md | 2 - docs/ja/understanding_qmk.md | 4 - docs/ru-ru/getting_started_github.md | 1 - docs/understanding_qmk.md | 5 - docs/zh-cn/getting_started_github.md | 1 - doxygen-todo | 6 - .../is31fl3731c/board_is31fl3731c_template.h | 105 ---- drivers/ugfx/gdisp/is31fl3731c/driver.mk | 3 - .../gdisp/is31fl3731c/gdisp_is31fl3731c.c | 302 ----------- .../ugfx/gdisp/is31fl3731c/gdisp_lld_config.h | 36 -- .../ugfx/gdisp/st7565/board_st7565_template.h | 96 ---- drivers/ugfx/gdisp/st7565/driver.mk | 3 - drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c | 314 ------------ drivers/ugfx/gdisp/st7565/gdisp_lld_config.h | 27 - drivers/ugfx/gdisp/st7565/st7565.h | 39 -- .../ergodox_infinity/board_is31fl3731c.h | 110 ---- keyboards/ergodox_infinity/board_st7565.h | 96 ---- keyboards/ergodox_infinity/config.h | 2 - keyboards/ergodox_infinity/ergodox_infinity.c | 11 +- keyboards/ergodox_infinity/ergodox_infinity.h | 2 - keyboards/ergodox_infinity/gfxconf.h | 27 - keyboards/ergodox_infinity/rules.mk | 7 - .../ergodox_infinity/simple_visualizer.h | 123 ----- keyboards/ergodox_infinity/visualizer.c | 328 ------------ keyboards/whitefox/gfxconf.h | 27 - keyboards/whitefox/visualizer.c | 54 -- lib/ugfx | 1 - quantum/keyboard.c | 8 - quantum/visualizer/LICENSE.md | 29 -- quantum/visualizer/common_gfxconf.h | 354 ------------- quantum/visualizer/default_animations.c | 177 ------- quantum/visualizer/default_animations.h | 27 - quantum/visualizer/lcd_backlight.c | 87 ---- quantum/visualizer/lcd_backlight.h | 43 -- quantum/visualizer/lcd_backlight_keyframes.c | 69 --- quantum/visualizer/lcd_backlight_keyframes.h | 27 - quantum/visualizer/lcd_keyframes.c | 184 ------- quantum/visualizer/lcd_keyframes.h | 35 -- quantum/visualizer/led_backlight_keyframes.c | 143 ------ quantum/visualizer/led_backlight_keyframes.h | 40 -- quantum/visualizer/readme.md | 18 - quantum/visualizer/resources/lcd_logo.c | 45 -- quantum/visualizer/resources/lcd_logo.png | Bin 271 -> 0 bytes quantum/visualizer/resources/resources.h | 23 - quantum/visualizer/visualizer.c | 483 ------------------ quantum/visualizer/visualizer.h | 154 ------ quantum/visualizer/visualizer.mk | 123 ----- quantum/visualizer/visualizer_keyframes.c | 23 - quantum/visualizer/visualizer_keyframes.h | 23 - show_options.mk | 1 - tmk_core/protocol/chibios/chibios.c | 14 - util/chibios_conf_updater.sh | 2 +- 66 files changed, 2 insertions(+), 3898 deletions(-) delete mode 100644 drivers/ugfx/gdisp/is31fl3731c/board_is31fl3731c_template.h delete mode 100644 drivers/ugfx/gdisp/is31fl3731c/driver.mk delete mode 100644 drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c delete mode 100644 drivers/ugfx/gdisp/is31fl3731c/gdisp_lld_config.h delete mode 100644 drivers/ugfx/gdisp/st7565/board_st7565_template.h delete mode 100644 drivers/ugfx/gdisp/st7565/driver.mk delete mode 100644 drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c delete mode 100644 drivers/ugfx/gdisp/st7565/gdisp_lld_config.h delete mode 100644 drivers/ugfx/gdisp/st7565/st7565.h delete mode 100644 keyboards/ergodox_infinity/board_is31fl3731c.h delete mode 100644 keyboards/ergodox_infinity/board_st7565.h delete mode 100644 keyboards/ergodox_infinity/gfxconf.h delete mode 100644 keyboards/ergodox_infinity/simple_visualizer.h delete mode 100644 keyboards/ergodox_infinity/visualizer.c delete mode 100644 keyboards/whitefox/gfxconf.h delete mode 100644 keyboards/whitefox/visualizer.c delete mode 160000 lib/ugfx delete mode 100644 quantum/visualizer/LICENSE.md delete mode 100644 quantum/visualizer/common_gfxconf.h delete mode 100644 quantum/visualizer/default_animations.c delete mode 100644 quantum/visualizer/default_animations.h delete mode 100644 quantum/visualizer/lcd_backlight.c delete mode 100644 quantum/visualizer/lcd_backlight.h delete mode 100644 quantum/visualizer/lcd_backlight_keyframes.c delete mode 100644 quantum/visualizer/lcd_backlight_keyframes.h delete mode 100644 quantum/visualizer/lcd_keyframes.c delete mode 100644 quantum/visualizer/lcd_keyframes.h delete mode 100644 quantum/visualizer/led_backlight_keyframes.c delete mode 100644 quantum/visualizer/led_backlight_keyframes.h delete mode 100644 quantum/visualizer/readme.md delete mode 100644 quantum/visualizer/resources/lcd_logo.c delete mode 100644 quantum/visualizer/resources/lcd_logo.png delete mode 100644 quantum/visualizer/resources/resources.h delete mode 100644 quantum/visualizer/visualizer.c delete mode 100644 quantum/visualizer/visualizer.h delete mode 100644 quantum/visualizer/visualizer.mk delete mode 100644 quantum/visualizer/visualizer_keyframes.c delete mode 100644 quantum/visualizer/visualizer_keyframes.h diff --git a/.gitmodules b/.gitmodules index 324ef790d3..681693a5a4 100644 --- a/.gitmodules +++ b/.gitmodules @@ -6,10 +6,6 @@ path = lib/chibios-contrib url = https://github.com/qmk/ChibiOS-Contrib branch = master -[submodule "lib/ugfx"] - path = lib/ugfx - url = https://github.com/qmk/uGFX - branch = master [submodule "lib/googletest"] path = lib/googletest url = https://github.com/qmk/googletest diff --git a/Makefile b/Makefile index 041b4d15ae..220a551915 100644 --- a/Makefile +++ b/Makefile @@ -490,7 +490,6 @@ endef ifndef SKIP_GIT if [ ! -e lib/chibios ]; then git submodule sync lib/chibios && git submodule update --depth 50 --init lib/chibios; fi if [ ! -e lib/chibios-contrib ]; then git submodule sync lib/chibios-contrib && git submodule update --depth 50 --init lib/chibios-contrib; fi - if [ ! -e lib/ugfx ]; then git submodule sync lib/ugfx && git submodule update --depth 50 --init lib/ugfx; fi if [ ! -e lib/lufa ]; then git submodule sync lib/lufa && git submodule update --depth 50 --init lib/lufa; fi if [ ! -e lib/vusb ]; then git submodule sync lib/vusb && git submodule update --depth 50 --init lib/vusb; fi if [ ! -e lib/printf ]; then git submodule sync lib/printf && git submodule update --depth 50 --init lib/printf; fi diff --git a/build_keyboard.mk b/build_keyboard.mk index 420643c3e7..6910458532 100644 --- a/build_keyboard.mk +++ b/build_keyboard.mk @@ -429,12 +429,6 @@ PROJECT_DEFS := $(OPT_DEFS) PROJECT_INC := $(VPATH) $(EXTRAINCDIRS) $(KEYBOARD_PATHS) PROJECT_CONFIG := $(CONFIG_H) -ifeq ($(strip $(VISUALIZER_ENABLE)), yes) - VISUALIZER_DIR = $(QUANTUM_DIR)/visualizer - VISUALIZER_PATH = $(QUANTUM_PATH)/visualizer - include $(VISUALIZER_PATH)/visualizer.mk -endif - CONFIG_H += $(POST_CONFIG_H) ALL_CONFIGS := $(PROJECT_CONFIG) $(CONFIG_H) diff --git a/common_features.mk b/common_features.mk index e3b42a9614..fc9595ddd7 100644 --- a/common_features.mk +++ b/common_features.mk @@ -450,10 +450,6 @@ ifeq ($(strip $(APA102_DRIVER_REQUIRED)), yes) SRC += apa102.c endif -ifeq ($(strip $(VISUALIZER_ENABLE)), yes) - CIE1931_CURVE := yes -endif - ifeq ($(strip $(CIE1931_CURVE)), yes) OPT_DEFS += -DUSE_CIE1931_CURVE LED_TABLES := yes diff --git a/disable_features.mk b/disable_features.mk index eeae688850..6733e4e808 100644 --- a/disable_features.mk +++ b/disable_features.mk @@ -22,7 +22,6 @@ FEATURE_NAMES += SLEEP_LED FEATURE_NAMES += SERIAL_LINK FEATURE_NAMES += STENO FEATURE_NAMES += SWAP_HANDS -FEATURE_NAMES += VISUALIZER FEATURE_NAMES += WATCHDOG FEATURE_NAMES += XT diff --git a/docs/es/hardware_drivers.md b/docs/es/hardware_drivers.md index e0a9736068..788de2c5ef 100644 --- a/docs/es/hardware_drivers.md +++ b/docs/es/hardware_drivers.md @@ -18,10 +18,6 @@ Soporte para direccionar pines en el ProMicro por su nombre Arduino en lugar de Soporte para pantallas OLED basadas en SSD1306. Para obtener más información consulta la página de [Característica de Controlador OLED](feature_oled_driver.md). -## uGFX - -Puedes hacer uso de uGFX dentro de QMK para manejar LCDs de caracteres y gráficos, matrices de LED, OLED, TFT, y otras tecnologías de visualización. Esto necesita ser mejor documentado. Si estás tratando de hacer esto y leer el código no ayuda por favor [abre una issue](https://github.com/qmk/qmk_firmware/issues/new) y podemos ayudarte por el proceso. - ## WS2812 (Solo AVR) Soporte para LEDs WS2811/WS2812{a,b,c}. Para obtener más información consulta la página de [Luz RGB](feature_rgblight.md). diff --git a/docs/es/hardware_keyboard_guidelines.md b/docs/es/hardware_keyboard_guidelines.md index a505cc5ce1..298a3b7ce7 100644 --- a/docs/es/hardware_keyboard_guidelines.md +++ b/docs/es/hardware_keyboard_guidelines.md @@ -142,8 +142,6 @@ El año debe ser el primer año en que se crea el archivo. Si el trabajo se hizo El núcleo de QMC está licenciado bajo la [GNU General Public License](https://www.gnu.org/licenses/licenses.en.html). Si estás enviando binarios para los procesadores AVR puedes elegir cualquiera [GPLv2](https://www.gnu.org/licenses/old-licenses/gpl-2.0.html) o [GPLv3](https://www.gnu.org/licenses/gpl.html). Si estás enviando binarios para ARM procesadores debes elegir [GPL Versión 3](https://www.gnu.org/licenses/gpl.html) para cumplir con los [ChibiOS](https://www.chibios.org) licencia GPLv3. -Si tu teclado hace uso de la [uGFX](https://gfx.io) características dentro de QMK debes cumplir con la [Licencia de uGFX](https://ugfx.io/license.html), que requiere una licencia comercial separada antes de vender un dispositivo que contiene uGFX. - ## Detalles técnicos Si estás buscando más información sobre cómo hacer que su teclado funcione con QMK, [echa un vistazo a la sección hardware](hardware.md)! diff --git a/docs/fr-fr/getting_started_github.md b/docs/fr-fr/getting_started_github.md index 0f3982ea29..522b09a03e 100644 --- a/docs/fr-fr/getting_started_github.md +++ b/docs/fr-fr/getting_started_github.md @@ -32,7 +32,6 @@ Submodule path 'lib/chibios': checked out '587968d6cbc2b0e1c7147540872f2a67e59ca Submodule path 'lib/chibios-contrib': checked out 'ede48346eee4b8d6847c19bc01420bee76a5e486' Submodule path 'lib/googletest': checked out 'ec44c6c1675c25b9827aacd08c02433cccde7780' Submodule path 'lib/lufa': checked out 'ce10f7642b0459e409839b23cc91498945119b4d' -Submodule path 'lib/ugfx': checked out '3e97b74e03c93631cdd3ddb2ce43b963fdce19b2' ``` Vous avez maintenant votre fork QMK sur votre machine locale, vous pouvez ajouter votre keymap, la compiler et la flasher sur votre board. Une fois heureux avec vos changements, vous pouvez les ajouter, commit, et pousser vers votre fork comme suit: diff --git a/docs/getting_started_github.md b/docs/getting_started_github.md index e3720b8869..9232bc6229 100644 --- a/docs/getting_started_github.md +++ b/docs/getting_started_github.md @@ -32,7 +32,6 @@ Submodule path 'lib/chibios': checked out '587968d6cbc2b0e1c7147540872f2a67e59ca Submodule path 'lib/chibios-contrib': checked out 'ede48346eee4b8d6847c19bc01420bee76a5e486' Submodule path 'lib/googletest': checked out 'ec44c6c1675c25b9827aacd08c02433cccde7780' Submodule path 'lib/lufa': checked out 'ce10f7642b0459e409839b23cc91498945119b4d' -Submodule path 'lib/ugfx': checked out '3e97b74e03c93631cdd3ddb2ce43b963fdce19b2' ``` You now have your QMK fork on your local machine, and you can add your keymap, compile it and flash it to your board. Once you're happy with your changes, you can add, commit, and push them to your fork like this: diff --git a/docs/hardware_drivers.md b/docs/hardware_drivers.md index 7e89c0d2b9..a157501326 100644 --- a/docs/hardware_drivers.md +++ b/docs/hardware_drivers.md @@ -18,10 +18,6 @@ Support for addressing pins on the ProMicro by their Arduino name rather than th Support for SSD1306 based OLED displays. For more information see the [OLED Driver Feature](feature_oled_driver.md) page. -## uGFX - -You can make use of uGFX within QMK to drive character and graphic LCDs, LED arrays, OLED, TFT, and other display technologies. This needs to be better documented, if you are trying to do this and reading the code doesn't help please [open an issue](https://github.com/qmk/qmk_firmware/issues/new) and we can help you through the process. - ## WS2812 Support for WS2811/WS2812{a,b,c} LED's. For more information see the [RGB Light](feature_rgblight.md) page. diff --git a/docs/hardware_keyboard_guidelines.md b/docs/hardware_keyboard_guidelines.md index f975f37f55..be55356b17 100644 --- a/docs/hardware_keyboard_guidelines.md +++ b/docs/hardware_keyboard_guidelines.md @@ -255,8 +255,6 @@ The year should be the first year the file is created. If work was done to that The core of QMK is licensed under the [GNU General Public License](https://www.gnu.org/licenses/licenses.en.html). If you are shipping binaries for AVR processors you may choose either [GPLv2](https://www.gnu.org/licenses/old-licenses/gpl-2.0.html) or [GPLv3](https://www.gnu.org/licenses/gpl.html). If you are shipping binaries for ARM processors you must choose [GPL Version 3](https://www.gnu.org/licenses/gpl.html) to comply with the [ChibiOS](https://www.chibios.org) GPLv3 license. -If your keyboard makes use of the [uGFX](https://ugfx.io) features within QMK you must comply with the [uGFX License](https://ugfx.io/license.html), which requires a separate commercial license before selling a device containing uGFX. - ## Technical Details If you're looking for more information on making your keyboard work with QMK, [check out the hardware section](hardware.md)! diff --git a/docs/he-il/getting_started_github.md b/docs/he-il/getting_started_github.md index 900852effd..ca79e40f9a 100644 --- a/docs/he-il/getting_started_github.md +++ b/docs/he-il/getting_started_github.md @@ -35,7 +35,6 @@ Submodule path 'lib/chibios': checked out '587968d6cbc2b0e1c7147540872f2a67e59ca Submodule path 'lib/chibios-contrib': checked out 'ede48346eee4b8d6847c19bc01420bee76a5e486' Submodule path 'lib/googletest': checked out 'ec44c6c1675c25b9827aacd08c02433cccde7780' Submodule path 'lib/lufa': checked out 'ce10f7642b0459e409839b23cc91498945119b4d' -Submodule path 'lib/ugfx': checked out '3e97b74e03c93631cdd3ddb2ce43b963fdce19b2' ``` diff --git a/docs/ja/getting_started_github.md b/docs/ja/getting_started_github.md index 6d9b70c410..6407011488 100644 --- a/docs/ja/getting_started_github.md +++ b/docs/ja/getting_started_github.md @@ -37,7 +37,6 @@ Submodule path 'lib/chibios': checked out '587968d6cbc2b0e1c7147540872f2a67e59ca Submodule path 'lib/chibios-contrib': checked out 'ede48346eee4b8d6847c19bc01420bee76a5e486' Submodule path 'lib/googletest': checked out 'ec44c6c1675c25b9827aacd08c02433cccde7780' Submodule path 'lib/lufa': checked out 'ce10f7642b0459e409839b23cc91498945119b4d' -Submodule path 'lib/ugfx': checked out '3e97b74e03c93631cdd3ddb2ce43b963fdce19b2' ``` ローカルマシンに QMK のフォークができるので、キーマップの追加、コンパイル、キーボードへの書き込みができます。変更に満足したら、以下のようにそれらをフォークへ追加、コミットおよびプッシュすることができます: diff --git a/docs/ja/hardware_drivers.md b/docs/ja/hardware_drivers.md index f77b48ba8e..e0061cb328 100644 --- a/docs/ja/hardware_drivers.md +++ b/docs/ja/hardware_drivers.md @@ -24,10 +24,6 @@ ProMicro のピンを AVR の名前ではなく、Arduino の名前で指定で SSD1306 ベースの OLED ディスプレイのサポート。詳しくは[OLED ドライバ](ja/feature_oled_driver.md)を参照して下さい。 -## uGFX - -QMK 内で uGFX を使用して、キャラクタ LCD やグラフィック LCD、LED アレイ、OLED ディスプレイ、TFT 液晶や他のディスプレイを制御できます。この部分はより詳しく文書化される必要があります。もしこれを使用したい場合にコードを読んでも分からない場合、[issue を開く](https://github.com/qmk/qmk_firmware/issues/new)を通して助けることができるかもしれません。 - ## WS2812 WS2811/WS2812{a,b,c} LED のサポート。 詳しくは [RGB ライト](ja/feature_rgblight.md)を参照して下さい。 diff --git a/docs/ja/hardware_keyboard_guidelines.md b/docs/ja/hardware_keyboard_guidelines.md index 8a9127abc9..c0e7c18be0 100644 --- a/docs/ja/hardware_keyboard_guidelines.md +++ b/docs/ja/hardware_keyboard_guidelines.md @@ -234,8 +234,6 @@ QMK が提供する機能の量を考えれば、新しいユーザーが混乱 QMK のコア部分は [GNU General Public License](https://www.gnu.org/licenses/licenses.en.html) でライセンスされます。AVR マイコン用のバイナリを提供する場合は、[GPLv2](https://www.gnu.org/licenses/old-licenses/gpl-2.0.html) か、[GPLv3](https://www.gnu.org/licenses/gpl.html) のどちらかから選択出来ます。ARM マイコン用のバイナリを提供する場合は、 [ChibiOS](https://www.chibios.org) の GPLv3 ライセンスに準拠するため、[GPL Version 3](https://www.gnu.org/licenses/gpl.html) を選択しなければいけません。 -[uGFX](https://ugfx.io) を使用している場合は、[uGFX License](https://ugfx.io/license.html) に準拠する必要があります。uGFX を利用したデバイスを販売するには個別に商用ライセンスを取得しなければいけません。 - ## 技術的な詳細 キーボードを QMK で動作させるための詳細は[ハードウェア](ja/hardware.md)を参照して下さい！ diff --git a/docs/ja/understanding_qmk.md b/docs/ja/understanding_qmk.md index 5fcb7be856..f88655ebca 100644 --- a/docs/ja/understanding_qmk.md +++ b/docs/ja/understanding_qmk.md @@ -183,10 +183,6 @@ FIXME: This needs to be written FIXME: This needs to be written -#### Visualizer - -FIXME: This needs to be written - #### Keyboard state LEDs (Caps Lock, Num Lock, Scroll Lock) FIXME: This needs to be written diff --git a/docs/ru-ru/getting_started_github.md b/docs/ru-ru/getting_started_github.md index 120f3c24ec..7a70926f50 100644 --- a/docs/ru-ru/getting_started_github.md +++ b/docs/ru-ru/getting_started_github.md @@ -31,7 +31,6 @@ Submodule path 'lib/chibios': checked out '587968d6cbc2b0e1c7147540872f2a67e59ca Submodule path 'lib/chibios-contrib': checked out 'ede48346eee4b8d6847c19bc01420bee76a5e486' Submodule path 'lib/googletest': checked out 'ec44c6c1675c25b9827aacd08c02433cccde7780' Submodule path 'lib/lufa': checked out 'ce10f7642b0459e409839b23cc91498945119b4d' -Submodule path 'lib/ugfx': checked out '3e97b74e03c93631cdd3ddb2ce43b963fdce19b2' ``` Теперь у вас есть форк QMK на вашем локальном компьютере, и вы можете добавить свою раскладку, скомпилировать ее и прошить ей свою клавиатуру. Как только вы будете довольны своими изменениями, есть возможность добавить, зафиксировать их и сделать коммит в свой форк следующим образом: diff --git a/docs/understanding_qmk.md b/docs/understanding_qmk.md index da622044c3..42a41fbe2a 100644 --- a/docs/understanding_qmk.md +++ b/docs/understanding_qmk.md @@ -29,7 +29,6 @@ Within `keyboard_task()` you'll find code to handle: * [Matrix Scanning](#matrix-scanning) * Mouse Handling * Serial Link(s) -* Visualizer * Keyboard status LEDs (Caps Lock, Num Lock, Scroll Lock) #### Matrix Scanning @@ -180,10 +179,6 @@ FIXME: This needs to be written FIXME: This needs to be written -#### Visualizer - -FIXME: This needs to be written - #### Keyboard state LEDs (Caps Lock, Num Lock, Scroll Lock) FIXME: This needs to be written diff --git a/docs/zh-cn/getting_started_github.md b/docs/zh-cn/getting_started_github.md index 65994754b9..b4e8e9fa5d 100644 --- a/docs/zh-cn/getting_started_github.md +++ b/docs/zh-cn/getting_started_github.md @@ -32,7 +32,6 @@ Submodule path 'lib/chibios': checked out '587968d6cbc2b0e1c7147540872f2a67e59ca Submodule path 'lib/chibios-contrib': checked out 'ede48346eee4b8d6847c19bc01420bee76a5e486' Submodule path 'lib/googletest': checked out 'ec44c6c1675c25b9827aacd08c02433cccde7780' Submodule path 'lib/lufa': checked out 'ce10f7642b0459e409839b23cc91498945119b4d' -Submodule path 'lib/ugfx': checked out '3e97b74e03c93631cdd3ddb2ce43b963fdce19b2' ``` 现在你本地计算机有QMK的分叉了,你可以添加你的布局了, 为你的键盘编译并刷新固件吧。如果你觉得你的修改很不错, 你可以添加,提交,然后想你的分叉推出（pull）你的改变，像这样: diff --git a/doxygen-todo b/doxygen-todo index 643a0df1da..54d7e9ef7b 100644 --- a/doxygen-todo +++ b/doxygen-todo @@ -18,10 +18,4 @@ quantum/serial_link/protocol quantum/serial_link/system quantum/serial_link/tests quantum/tools -quantum/visualizer -quantum/visualizer/resources drivers -drivers/ugfx -drivers/ugfx/gdisp -drivers/ugfx/gdisp/is31fl3731c -drivers/ugfx/gdisp/st7565 diff --git a/drivers/ugfx/gdisp/is31fl3731c/board_is31fl3731c_template.h b/drivers/ugfx/gdisp/is31fl3731c/board_is31fl3731c_template.h deleted file mode 100644 index 0755ddf6c4..0000000000 --- a/drivers/ugfx/gdisp/is31fl3731c/board_is31fl3731c_template.h +++ /dev/null @@ -1,105 +0,0 @@ -/* -Copyright 2016 Fred Sundvik - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef _GDISP_LLD_BOARD_H -#define _GDISP_LLD_BOARD_H - -static const I2CConfig i2ccfg = { - 400000 // clock speed (Hz); 400kHz max for IS31 -}; - -static const uint8_t led_mask[] = { - 0xFF, 0x00, /* C1-1 -> C1-16 */ - 0xFF, 0x00, /* C2-1 -> C2-16 */ - 0xFF, 0x00, /* C3-1 -> C3-16 */ - 0xFF, 0x00, /* C4-1 -> C4-16 */ - 0x3F, 0x00, /* C5-1 -> C5-16 */ - 0x00, 0x00, /* C6-1 -> C6-16 */ - 0x00, 0x00, /* C7-1 -> C7-16 */ - 0x00, 0x00, /* C8-1 -> C8-16 */ - 0x00, 0x00, /* C9-1 -> C9-16 */ -}; - -// The address of the LED -#define LA(c, r) (c + r * 16) -// Need to be an address that is not mapped, but inside the range of the controller matrix -#define NA LA(8, 8) - -// The numbers in the comments are the led numbers DXX on the PCB -// The mapping is taken from the schematic of left hand side -static const uint8_t led_mapping[GDISP_SCREEN_HEIGHT][GDISP_SCREEN_WIDTH] = { - // 45 44 43 42 41 40 39 - {LA(1, 1), LA(1, 0), LA(0, 4), LA(0, 3), LA(0, 2), LA(0, 1), LA(0, 0)}, - // 52 51 50 49 48 47 46 - {LA(2, 3), LA(2, 2), LA(2, 1), LA(2, 0), LA(1, 4), LA(1, 3), LA(1, 2)}, - // 58 57 56 55 54 53 N/A - {LA(3, 4), LA(3, 3), LA(3, 2), LA(3, 1), LA(3, 0), LA(2, 4), NA}, - // 67 66 65 64 63 62 61 - {LA(5, 3), LA(5, 2), LA(5, 1), LA(5, 0), LA(4, 4), LA(4, 3), LA(4, 2)}, - // 76 75 74 73 72 60 59 - {LA(7, 3), LA(7, 2), LA(7, 1), LA(7, 0), LA(6, 3), LA(4, 1), LA(4, 0)}, - // N/A N/A N/A N/A N/A N/A 68 - {NA, NA, NA, NA, NA, NA, LA(5, 4)}, - // N/A N/A N/A N/A 71 70 69 - {NA, NA, NA, NA, LA(6, 2), LA(6, 1), LA(6, 0)}, -}; - -#define IS31_ADDR_DEFAULT 0x74 // AD connected to GND -#define IS31_TIMEOUT 5000 - -static GFXINLINE void init_board(GDisplay* g) { - (void)g; - /* I2C pins */ - palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL - palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA - palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL); - palClearPad(GPIOB, 16); - /* start I2C */ - i2cStart(&I2CD1, &i2ccfg); - // try high drive (from kiibohd) - I2CD1.i2c->C2 |= I2Cx_C2_HDRS; - // try glitch fixing (from kiibohd) - I2CD1.i2c->FLT = 4; -} - -static GFXINLINE void post_init_board(GDisplay* g) { (void)g; } - -static GFXINLINE const uint8_t* get_led_mask(GDisplay* g) { - (void)g; - return led_mask; -} - -static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y) { - (void)g; - return led_mapping[y][x]; -} - -static GFXINLINE void set_hardware_shutdown(GDisplay* g, bool shutdown) { - (void)g; - if (!shutdown) { - palSetPad(GPIOB, 16); - } else { - palClearPad(GPIOB, 16); - } -} - -static GFXINLINE void write_data(GDisplay* g, uint8_t* data, uint16_t length) { - (void)g; - i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT)); -} - -#endif /* _GDISP_LLD_BOARD_H */ diff --git a/drivers/ugfx/gdisp/is31fl3731c/driver.mk b/drivers/ugfx/gdisp/is31fl3731c/driver.mk deleted file mode 100644 index a53131bf33..0000000000 --- a/drivers/ugfx/gdisp/is31fl3731c/driver.mk +++ /dev/null @@ -1,3 +0,0 @@ -GFXINC += drivers/ugfx/gdisp/is31fl3731c -GFXSRC += drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c -GDISP_DRIVER_LIST += GDISPVMT_IS31FL3731C_QMK diff --git a/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c b/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c deleted file mode 100644 index 7188244022..0000000000 --- a/drivers/ugfx/gdisp/is31fl3731c/gdisp_is31fl3731c.c +++ /dev/null @@ -1,302 +0,0 @@ -/* -Copyright 2016 Fred Sundvik - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include "gfx.h" - -#if GFX_USE_GDISP - -# define GDISP_DRIVER_VMT GDISPVMT_IS31FL3731C_QMK -# define GDISP_SCREEN_HEIGHT LED_HEIGHT -# define GDISP_SCREEN_WIDTH LED_WIDTH - -# include "gdisp_lld_config.h" -# include "src/gdisp/gdisp_driver.h" - -# include "board_is31fl3731c.h" - -// Can't include led_tables from here -extern const uint8_t CIE1931_CURVE[]; - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -# ifndef GDISP_INITIAL_CONTRAST -# define GDISP_INITIAL_CONTRAST 0 -# endif -# ifndef GDISP_INITIAL_BACKLIGHT -# define GDISP_INITIAL_BACKLIGHT 0 -# endif - -# define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER << 0) - -# define IS31_ADDR_DEFAULT 0x74 - -# define IS31_REG_CONFIG 0x00 -// bits in reg -# define IS31_REG_CONFIG_PICTUREMODE 0x00 -# define IS31_REG_CONFIG_AUTOPLAYMODE 0x08 -# define IS31_REG_CONFIG_AUDIOPLAYMODE 0x18 -// D2:D0 bits are starting frame for autoplay mode - -# define IS31_REG_PICTDISP 0x01 // D2:D0 frame select for picture mode - -# define IS31_REG_AUTOPLAYCTRL1 0x02 -// D6:D4 number of loops (000=infty) -// D2:D0 number of frames to be used - -# define IS31_REG_AUTOPLAYCTRL2 0x03 // D5:D0 delay time (*11ms) - -# define IS31_REG_DISPLAYOPT 0x05 -# define IS31_REG_DISPLAYOPT_INTENSITY_SAME 0x20 // same intensity for all frames -# define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x8 -// D2:D0 bits blink period time (*0.27s) - -# define IS31_REG_AUDIOSYNC 0x06 -# define IS31_REG_AUDIOSYNC_ENABLE 0x1 - -# define IS31_REG_FRAMESTATE 0x07 - -# define IS31_REG_BREATHCTRL1 0x08 -// D6:D4 fade out time (26ms*2^i) -// D2:D0 fade in time (26ms*2^i) - -# define IS31_REG_BREATHCTRL2 0x09 -# define IS31_REG_BREATHCTRL2_ENABLE 0x10 -// D2:D0 extinguish time (3.5ms*2^i) - -# define IS31_REG_SHUTDOWN 0x0A -# define IS31_REG_SHUTDOWN_OFF 0x0 -# define IS31_REG_SHUTDOWN_ON 0x1 - -# define IS31_REG_AGCCTRL 0x0B -# define IS31_REG_ADCRATE 0x0C - -# define IS31_COMMANDREGISTER 0xFD -# define IS31_FUNCTIONREG 0x0B // helpfully called 'page nine' -# define IS31_FUNCTIONREG_SIZE 0xD - -# define IS31_FRAME_SIZE 0xB4 - -# define IS31_PWM_REG 0x24 -# define IS31_PWM_SIZE 0x90 - -# define IS31_LED_MASK_SIZE 0x12 - -# define IS31 - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -typedef struct { - uint8_t write_buffer_offset; - uint8_t write_buffer[IS31_FRAME_SIZE]; - uint8_t frame_buffer[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH]; - uint8_t page; -} __attribute__((__packed__)) PrivData; - -// Some common routines and macros -# define PRIV(g) ((PrivData *)g->priv) - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -static GFXINLINE void write_page(GDisplay *g, uint8_t page) { - uint8_t tx[2] __attribute__((aligned(2))); - tx[0] = IS31_COMMANDREGISTER; - tx[1] = page; - write_data(g, tx, 2); -} - -static GFXINLINE void write_register(GDisplay *g, uint8_t page, uint8_t reg, uint8_t data) { - uint8_t tx[2] __attribute__((aligned(2))); - tx[0] = reg; - tx[1] = data; - write_page(g, page); - write_data(g, tx, 2); -} - -static GFXINLINE void write_ram(GDisplay *g, uint8_t page, uint16_t offset, uint16_t length) { - PRIV(g)->write_buffer_offset = offset; - write_page(g, page); - write_data(g, (uint8_t *)PRIV(g), length + 1); -} - -LLDSPEC bool_t gdisp_lld_init(GDisplay *g) { - // The private area is the display surface. - g->priv = gfxAlloc(sizeof(PrivData)); - __builtin_memset(PRIV(g), 0, sizeof(PrivData)); - PRIV(g)->page = 0; - - // Initialise the board interface - init_board(g); - gfxSleepMilliseconds(10); - - // zero function page, all registers (assuming full_page is all zeroes) - write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE); - set_hardware_shutdown(g, false); - gfxSleepMilliseconds(10); - // software shutdown - write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); - gfxSleepMilliseconds(10); - // zero function page, all registers - write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE); - gfxSleepMilliseconds(10); - - // zero all LED registers on all 8 pages, and enable the mask - __builtin_memcpy(PRIV(g)->write_buffer, get_led_mask(g), IS31_LED_MASK_SIZE); - for (uint8_t i = 0; i < 8; i++) { - write_ram(g, i, 0, IS31_FRAME_SIZE); - gfxSleepMilliseconds(1); - } - - // software shutdown disable (i.e. turn stuff on) - write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); - gfxSleepMilliseconds(10); - - // Finish Init - post_init_board(g); - - /* Initialise the GDISP structure */ - g->g.Width = GDISP_SCREEN_WIDTH; - g->g.Height = GDISP_SCREEN_HEIGHT; - g->g.Orientation = GDISP_ROTATE_0; - g->g.Powermode = powerOff; - g->g.Backlight = GDISP_INITIAL_BACKLIGHT; - g->g.Contrast = GDISP_INITIAL_CONTRAST; - return TRUE; -} - -# if GDISP_HARDWARE_FLUSH -LLDSPEC void gdisp_lld_flush(GDisplay *g) { - // Don't flush if we don't need it. - if (!(g->flags & GDISP_FLG_NEEDFLUSH)) return; - - PRIV(g)->page++; - PRIV(g)->page %= 2; - // TODO: some smarter algorithm for this - // We should run only one physical page at a time - // This way we don't need to send so much data, and - // we could use slightly less memory - uint8_t *src = PRIV(g)->frame_buffer; - for (int y = 0; y < GDISP_SCREEN_HEIGHT; y++) { - for (int x = 0; x < GDISP_SCREEN_WIDTH; x++) { - uint8_t val = (uint16_t)*src * g->g.Backlight / 100; - PRIV(g)->write_buffer[get_led_address(g, x, y)] = CIE1931_CURVE[val]; - ++src; - } - } - write_ram(g, PRIV(g)->page, IS31_PWM_REG, IS31_PWM_SIZE); - gfxSleepMilliseconds(1); - write_register(g, IS31_FUNCTIONREG, IS31_REG_PICTDISP, PRIV(g)->page); - - g->flags &= ~GDISP_FLG_NEEDFLUSH; -} -# endif - -# if GDISP_HARDWARE_DRAWPIXEL -LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) { - coord_t x, y; - - switch (g->g.Orientation) { - default: - case GDISP_ROTATE_0: - x = g->p.x; - y = g->p.y; - break; - case GDISP_ROTATE_180: - x = GDISP_SCREEN_WIDTH - 1 - g->p.x; - y = g->p.y; - break; - } - PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x] = gdispColor2Native(g->p.color); - g->flags |= GDISP_FLG_NEEDFLUSH; -} -# endif - -# if GDISP_HARDWARE_PIXELREAD -LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) { - coord_t x, y; - - switch (g->g.Orientation) { - default: - case GDISP_ROTATE_0: - x = g->p.x; - y = g->p.y; - break; - case GDISP_ROTATE_180: - x = GDISP_SCREEN_WIDTH - 1 - g->p.x; - y = g->p.y; - break; - } - return gdispNative2Color(PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x]); -} -# endif - -# if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL -LLDSPEC void gdisp_lld_control(GDisplay *g) { - switch (g->p.x) { - case GDISP_CONTROL_POWER: - if (g->g.Powermode == (powermode_t)g->p.ptr) return; - switch ((powermode_t)g->p.ptr) { - case powerOff: - case powerSleep: - case powerDeepSleep: - write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); - break; - case powerOn: - write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON); - break; - default: - return; - } - g->g.Powermode = (powermode_t)g->p.ptr; - return; - - case GDISP_CONTROL_ORIENTATION: - if (g->g.Orientation == (orientation_t)g->p.ptr) return; - switch ((orientation_t)g->p.ptr) { - /* Rotation is handled by the drawing routines */ - case GDISP_ROTATE_0: - case GDISP_ROTATE_180: - g->g.Height = GDISP_SCREEN_HEIGHT; - g->g.Width = GDISP_SCREEN_WIDTH; - break; - case GDISP_ROTATE_90: - case GDISP_ROTATE_270: - g->g.Height = GDISP_SCREEN_WIDTH; - g->g.Width = GDISP_SCREEN_HEIGHT; - break; - default: - return; - } - g->g.Orientation = (orientation_t)g->p.ptr; - return; - - case GDISP_CONTROL_BACKLIGHT: - if (g->g.Backlight == (unsigned)g->p.ptr) return; - unsigned val = (unsigned)g->p.ptr; - g->g.Backlight = val > 100 ? 100 : val; - g->flags |= GDISP_FLG_NEEDFLUSH; - return; - } -} -# endif // GDISP_NEED_CONTROL - -#endif // GFX_USE_GDISP diff --git a/drivers/ugfx/gdisp/is31fl3731c/gdisp_lld_config.h b/drivers/ugfx/gdisp/is31fl3731c/gdisp_lld_config.h deleted file mode 100644 index 403c6b0409..0000000000 --- a/drivers/ugfx/gdisp/is31fl3731c/gdisp_lld_config.h +++ /dev/null @@ -1,36 +0,0 @@ -/* -Copyright 2016 Fred Sundvik - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef _GDISP_LLD_CONFIG_H -#define _GDISP_LLD_CONFIG_H - -#if GFX_USE_GDISP - -/*===========================================================================*/ -/* Driver hardware support. */ -/*===========================================================================*/ - -# define GDISP_HARDWARE_FLUSH GFXON // This controller requires flushing -# define GDISP_HARDWARE_DRAWPIXEL GFXON -# define GDISP_HARDWARE_PIXELREAD GFXON -# define GDISP_HARDWARE_CONTROL GFXON - -# define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_GRAY256 - -#endif /* GFX_USE_GDISP */ - -#endif /* _GDISP_LLD_CONFIG_H */ diff --git a/drivers/ugfx/gdisp/st7565/board_st7565_template.h b/drivers/ugfx/gdisp/st7565/board_st7565_template.h deleted file mode 100644 index 875ed9e65c..0000000000 --- a/drivers/ugfx/gdisp/st7565/board_st7565_template.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * This file is subject to the terms of the GFX License. If a copy of - * the license was not distributed with this file, you can obtain one at: - * - * http://ugfx.org/license.html - */ - -#ifndef _GDISP_LLD_BOARD_H -#define _GDISP_LLD_BOARD_H - -#include "quantum.h" - -#define ST7565_LCD_BIAS ST7565_LCD_BIAS_7 -#define ST7565_COM_SCAN ST7565_COM_SCAN_DEC -#define ST7565_PAGE_ORDER 0, 1, 2, 3 -/* - * Custom page order for several LCD boards, e.g. HEM12864-99 - * #define ST7565_PAGE_ORDER 4,5,6,7,0,1,2,3 - */ - -#define ST7565_A0_PIN C7 -#define ST7565_RST_PIN C8 -#define ST7565_MOSI_PIN C6 -#define ST7565_SCLK_PIN C5 -#define ST7565_SS_PIN C4 - -// DSPI Clock and Transfer Attributes -// Frame Size: 8 bits -// MSB First -// CLK Low by default -static const SPIConfig spi1config = { - // Operation complete callback or @p NULL. - .end_cb = NULL, - // The chip select line port - when not using pcs. - .ssport = PAL_PORT(ST7565_SS_PIN), - // brief The chip select line pad number - when not using pcs. - .sspad = PAL_PAD(ST7565_SS_PIN), - // SPI initialization data. - .tar0 = SPIx_CTARn_FMSZ(7) // Frame size = 8 bytes - | SPIx_CTARn_ASC(1) // After SCK Delay Scaler (min 50 ns) = 55.56ns - | SPIx_CTARn_DT(0) // Delay After Transfer Scaler (no minimum)= 27.78ns - | SPIx_CTARn_CSSCK(0) // PCS to SCK Delay Scaler (min 20 ns) = 27.78ns - | SPIx_CTARn_PBR(0) // Baud Rate Prescaler = 2 - | SPIx_CTARn_BR(0) // Baud rate (min 50ns) = 55.56ns -}; - -static GFXINLINE void acquire_bus(GDisplay *g) { - (void)g; - // Only the LCD is using the SPI bus, so no need to acquire - // spiAcquireBus(&SPID1); - spiSelect(&SPID1); -} - -static GFXINLINE void release_bus(GDisplay *g) { - (void)g; - // Only the LCD is using the SPI bus, so no need to release - // spiReleaseBus(&SPID1); - spiUnselect(&SPID1); -} - -static GFXINLINE void init_board(GDisplay *g) { - (void)g; - setPinOutput(ST7565_A0_PIN); - writePinHigh(ST7565_A0_PIN); - setPinOutput(ST7565_RST_PIN); - writePinHigh(ST7565_RST_PIN); - setPinOutput(ST7565_SS_PIN); - - palSetPadMode(PAL_PORT(ST7565_MOSI_PIN), PAL_PAD(ST7565_MOSI_PIN), PAL_MODE_ALTERNATIVE_2); - palSetPadMode(PAL_PORT(ST7565_SCLK_PIN), PAL_PAD(ST7565_SCLK_PIN), PAL_MODE_ALTERNATIVE_2); - - spiInit(); - spiStart(&SPID1, &spi1config); - release_bus(g); -} - -static GFXINLINE void post_init_board(GDisplay *g) { (void)g; } - -static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) { - (void)g; - writePin(ST7565_RST_PIN, !state); -} - -static GFXINLINE void write_cmd(GDisplay *g, gU8 cmd) { - (void)g; - writePinLow(ST7565_A0_PIN); - spiSend(&SPID1, 1, &cmd); -} - -static GFXINLINE void write_data(GDisplay *g, gU8 *data, gU16 length) { - (void)g; - writePinHigh(ST7565_A0_PIN); - spiSend(&SPID1, length, data); -} - -#endif /* _GDISP_LLD_BOARD_H */ diff --git a/drivers/ugfx/gdisp/st7565/driver.mk b/drivers/ugfx/gdisp/st7565/driver.mk deleted file mode 100644 index 799a986b0a..0000000000 --- a/drivers/ugfx/gdisp/st7565/driver.mk +++ /dev/null @@ -1,3 +0,0 @@ -GFXINC += drivers/ugfx/gdisp/st7565 -GFXSRC += drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c -GDISP_DRIVER_LIST += GDISPVMT_ST7565_QMK diff --git a/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c b/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c deleted file mode 100644 index f586f97e38..0000000000 --- a/drivers/ugfx/gdisp/st7565/gdisp_lld_ST7565.c +++ /dev/null @@ -1,314 +0,0 @@ -/* - * This file is subject to the terms of the GFX License. If a copy of - * the license was not distributed with this file, you can obtain one at: - * - * http://ugfx.org/license.html - */ - -#include "gfx.h" - -#if GFX_USE_GDISP - -# define GDISP_DRIVER_VMT GDISPVMT_ST7565_QMK -# include "gdisp_lld_config.h" -# include "src/gdisp/gdisp_driver.h" - -# include "board_st7565.h" - -/*===========================================================================*/ -/* Driver local definitions. */ -/*===========================================================================*/ - -# ifndef GDISP_SCREEN_HEIGHT -# define GDISP_SCREEN_HEIGHT LCD_HEIGHT -# endif -# ifndef GDISP_SCREEN_WIDTH -# define GDISP_SCREEN_WIDTH LCD_WIDTH -# endif -# ifndef GDISP_INITIAL_CONTRAST -# define GDISP_INITIAL_CONTRAST 35 -# endif -# ifndef GDISP_INITIAL_BACKLIGHT -# define GDISP_INITIAL_BACKLIGHT 100 -# endif - -# define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER << 0) - -# include "st7565.h" - -/*===========================================================================*/ -/* Driver config defaults for backward compatibility. */ -/*===========================================================================*/ -# ifndef ST7565_LCD_BIAS -# define ST7565_LCD_BIAS ST7565_LCD_BIAS_7 -# endif -# ifndef ST7565_ADC -# define ST7565_ADC ST7565_ADC_NORMAL -# endif -# ifndef ST7565_COM_SCAN -# define ST7565_COM_SCAN ST7565_COM_SCAN_INC -# endif -# ifndef ST7565_PAGE_ORDER -# define ST7565_PAGE_ORDER 0, 1, 2, 3, 4, 5, 6, 7 -# endif - -/*===========================================================================*/ -/* Driver local functions. */ -/*===========================================================================*/ - -// Some common routines and macros -# define RAM(g) ((gU8 *)g->priv) -# define write_cmd2(g, cmd1, cmd2) \ - { \ - write_cmd(g, cmd1); \ - write_cmd(g, cmd2); \ - } -# define write_cmd3(g, cmd1, cmd2, cmd3) \ - { \ - write_cmd(g, cmd1); \ - write_cmd(g, cmd2); \ - write_cmd(g, cmd3); \ - } - -// Some common routines and macros -# define delay(us) gfxSleepMicroseconds(us) -# define delay_ms(ms) gfxSleepMilliseconds(ms) - -# define xyaddr(x, y) ((x) + ((y) >> 3) * GDISP_SCREEN_WIDTH) -# define xybit(y) (1 << ((y)&7)) - -/*===========================================================================*/ -/* Driver exported functions. */ -/*===========================================================================*/ - -/* - * As this controller can't update on a pixel boundary we need to maintain the - * the entire display surface in memory so that we can do the necessary bit - * operations. Fortunately it is a small display in monochrome. - * 64 * 128 / 8 = 1024 bytes. - */ - -LLDSPEC bool_t gdisp_lld_init(GDisplay *g) { - // The private area is the display surface. - g->priv = gfxAlloc(GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH / 8); - if (!g->priv) { - return gFalse; - } - - // Initialise the board interface - init_board(g); - - // Hardware reset - setpin_reset(g, TRUE); - gfxSleepMilliseconds(20); - setpin_reset(g, FALSE); - gfxSleepMilliseconds(20); - acquire_bus(g); - - write_cmd(g, ST7565_LCD_BIAS); - write_cmd(g, ST7565_ADC); - write_cmd(g, ST7565_COM_SCAN); - - write_cmd(g, ST7565_START_LINE | 0); - - write_cmd2(g, ST7565_CONTRAST, GDISP_INITIAL_CONTRAST * 64 / 101); - write_cmd(g, ST7565_RESISTOR_RATIO | 0x1); - - // turn on voltage converter (VC=1, VR=0, VF=0) - write_cmd(g, ST7565_POWER_CONTROL | 0x04); - delay_ms(50); - - // turn on voltage regulator (VC=1, VR=1, VF=0) - write_cmd(g, ST7565_POWER_CONTROL | 0x06); - delay_ms(50); - - // turn on voltage follower (VC=1, VR=1, VF=1) - write_cmd(g, ST7565_POWER_CONTROL | 0x07); - delay_ms(50); - - write_cmd(g, ST7565_DISPLAY_ON); - write_cmd(g, ST7565_ALLON_NORMAL); - write_cmd(g, ST7565_INVERT_DISPLAY); // Disable Inversion of display. - - write_cmd(g, ST7565_RMW); - - // Finish Init - post_init_board(g); - - // Release the bus - release_bus(g); - - /* Initialise the GDISP structure */ - g->g.Width = GDISP_SCREEN_WIDTH; - g->g.Height = GDISP_SCREEN_HEIGHT; - g->g.Orientation = GDISP_ROTATE_0; - g->g.Powermode = powerOff; - g->g.Backlight = GDISP_INITIAL_BACKLIGHT; - g->g.Contrast = GDISP_INITIAL_CONTRAST; - return TRUE; -} - -# if GDISP_HARDWARE_FLUSH -LLDSPEC void gdisp_lld_flush(GDisplay *g) { - unsigned p; - - // Don't flush if we don't need it. - if (!(g->flags & GDISP_FLG_NEEDFLUSH)) return; - - acquire_bus(g); - gU8 pagemap[] = {ST7565_PAGE_ORDER}; - for (p = 0; p < sizeof(pagemap); p++) { - write_cmd(g, ST7565_PAGE | pagemap[p]); - write_cmd(g, ST7565_COLUMN_MSB | 0); - write_cmd(g, ST7565_COLUMN_LSB | 0); - write_cmd(g, ST7565_RMW); - write_data(g, RAM(g) + (p * GDISP_SCREEN_WIDTH), GDISP_SCREEN_WIDTH); - } - release_bus(g); - - g->flags &= ~GDISP_FLG_NEEDFLUSH; -} -# endif - -# if GDISP_HARDWARE_DRAWPIXEL -LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) { - coord_t x, y; - - switch (g->g.Orientation) { - default: - case GDISP_ROTATE_0: - x = g->p.x; - y = g->p.y; - break; - case GDISP_ROTATE_90: - x = g->p.y; - y = GDISP_SCREEN_HEIGHT - 1 - g->p.x; - break; - case GDISP_ROTATE_180: - x = GDISP_SCREEN_WIDTH - 1 - g->p.x; - y = GDISP_SCREEN_HEIGHT - 1 - g->p.y; - break; - case GDISP_ROTATE_270: - x = GDISP_SCREEN_HEIGHT - 1 - g->p.y; - y = g->p.x; - break; - } - if (gdispColor2Native(g->p.color) != Black) - RAM(g)[xyaddr(x, y)] |= xybit(y); - else - RAM(g)[xyaddr(x, y)] &= ~xybit(y); - g->flags |= GDISP_FLG_NEEDFLUSH; -} -# endif - -# if GDISP_HARDWARE_PIXELREAD -LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) { - coord_t x, y; - - switch (g->g.Orientation) { - default: - case GDISP_ROTATE_0: - x = g->p.x; - y = g->p.y; - break; - case GDISP_ROTATE_90: - x = g->p.y; - y = GDISP_SCREEN_HEIGHT - 1 - g->p.x; - break; - case GDISP_ROTATE_180: - x = GDISP_SCREEN_WIDTH - 1 - g->p.x; - y = GDISP_SCREEN_HEIGHT - 1 - g->p.y; - break; - case GDISP_ROTATE_270: - x = GDISP_SCREEN_HEIGHT - 1 - g->p.y; - y = g->p.x; - break; - } - return (RAM(g)[xyaddr(x, y)] & xybit(y)) ? White : Black; -} -# endif - -# if GDISP_HARDWARE_BITFILLS -LLDSPEC void gdisp_lld_blit_area(GDisplay *g) { - uint8_t *buffer = (uint8_t *)g->p.ptr; - int linelength = g->p.cx; - for (int i = 0; i < g->p.cy; i++) { - unsigned dstx = g->p.x; - unsigned dsty = g->p.y + i; - unsigned srcx = g->p.x1; - unsigned srcy = g->p.y1 + i; - unsigned srcbit = srcy * g->p.x2 + srcx; - for (int j = 0; j < linelength; j++) { - uint8_t src = buffer[srcbit / 8]; - uint8_t bit = 7 - (srcbit % 8); - uint8_t bitset = (src >> bit) & 1; - uint8_t *dst = &(RAM(g)[xyaddr(dstx, dsty)]); - if (bitset) { - *dst |= xybit(dsty); - } else { - *dst &= ~xybit(dsty); - } - dstx++; - srcbit++; - } - } - g->flags |= GDISP_FLG_NEEDFLUSH; -} -# endif - -# if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL -LLDSPEC void gdisp_lld_control(GDisplay *g) { - switch (g->p.x) { - case GDISP_CONTROL_POWER: - if (g->g.Powermode == (powermode_t)g->p.ptr) return; - switch ((powermode_t)g->p.ptr) { - case powerOff: - case powerSleep: - case powerDeepSleep: - acquire_bus(g); - write_cmd(g, ST7565_DISPLAY_OFF); - release_bus(g); - break; - case powerOn: - acquire_bus(g); - write_cmd(g, ST7565_DISPLAY_ON); - release_bus(g); - break; - default: - return; - } - g->g.Powermode = (powermode_t)g->p.ptr; - return; - - case GDISP_CONTROL_ORIENTATION: - if (g->g.Orientation == (orientation_t)g->p.ptr) return; - switch ((orientation_t)g->p.ptr) { - /* Rotation is handled by the drawing routines */ - case GDISP_ROTATE_0: - case GDISP_ROTATE_180: - g->g.Height = GDISP_SCREEN_HEIGHT; - g->g.Width = GDISP_SCREEN_WIDTH; - break; - case GDISP_ROTATE_90: - case GDISP_ROTATE_270: - g->g.Height = GDISP_SCREEN_WIDTH; - g->g.Width = GDISP_SCREEN_HEIGHT; - break; - default: - return; - } - g->g.Orientation = (orientation_t)g->p.ptr; - return; - - case GDISP_CONTROL_CONTRAST: - if ((unsigned)g->p.ptr > 100) g->p.ptr = (void *)100; - acquire_bus(g); - write_cmd2(g, ST7565_CONTRAST, ((((unsigned)g->p.ptr) << 6) / 101) & 0x3F); - release_bus(g); - g->g.Contrast = (unsigned)g->p.ptr; - return; - } -} -# endif // GDISP_NEED_CONTROL - -#endif // GFX_USE_GDISP diff --git a/drivers/ugfx/gdisp/st7565/gdisp_lld_config.h b/drivers/ugfx/gdisp/st7565/gdisp_lld_config.h deleted file mode 100644 index 6052058ec2..0000000000 --- a/drivers/ugfx/gdisp/st7565/gdisp_lld_config.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * This file is subject to the terms of the GFX License. If a copy of - * the license was not distributed with this file, you can obtain one at: - * - * http://ugfx.org/license.html - */ - -#ifndef _GDISP_LLD_CONFIG_H -#define _GDISP_LLD_CONFIG_H - -#if GFX_USE_GDISP - -/*===========================================================================*/ -/* Driver hardware support. */ -/*===========================================================================*/ - -# define GDISP_HARDWARE_FLUSH GFXON // This controller requires flushing -# define GDISP_HARDWARE_DRAWPIXEL GFXON -# define GDISP_HARDWARE_PIXELREAD GFXON -# define GDISP_HARDWARE_CONTROL GFXON -# define GDISP_HARDWARE_BITFILLS GFXON - -# define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_MONO - -#endif /* GFX_USE_GDISP */ - -#endif /* _GDISP_LLD_CONFIG_H */ diff --git a/drivers/ugfx/gdisp/st7565/st7565.h b/drivers/ugfx/gdisp/st7565/st7565.h deleted file mode 100644 index 3c77a88569..0000000000 --- a/drivers/ugfx/gdisp/st7565/st7565.h +++ /dev/null @@ -1,39 +0,0 @@ -/* - * This file is subject to the terms of the GFX License. If a copy of - * the license was not distributed with this file, you can obtain one at: - * - * http://ugfx.org/license.html - */ - -#ifndef _ST7565_H -#define _ST7565_H - -#define ST7565_CONTRAST 0x81 -#define ST7565_ALLON_NORMAL 0xA4 -#define ST7565_ALLON 0xA5 -#define ST7565_POSITIVE_DISPLAY 0xA6 -#define ST7565_INVERT_DISPLAY 0xA7 -#define ST7565_DISPLAY_OFF 0xAE -#define ST7565_DISPLAY_ON 0xAF - -#define ST7565_LCD_BIAS_7 0xA3 -#define ST7565_LCD_BIAS_9 0xA2 - -#define ST7565_ADC_NORMAL 0xA0 -#define ST7565_ADC_REVERSE 0xA1 - -#define ST7565_COM_SCAN_INC 0xC0 -#define ST7565_COM_SCAN_DEC 0xC8 - -#define ST7565_START_LINE 0x40 -#define ST7565_PAGE 0xB0 -#define ST7565_COLUMN_MSB 0x10 -#define ST7565_COLUMN_LSB 0x00 -#define ST7565_RMW 0xE0 - -#define ST7565_RESISTOR_RATIO 0x20 -#define ST7565_POWER_CONTROL 0x28 - -#define ST7565_RESET 0xE2 - -#endif /* _ST7565_H */ diff --git a/keyboards/ergodox_infinity/board_is31fl3731c.h b/keyboards/ergodox_infinity/board_is31fl3731c.h deleted file mode 100644 index b2ed2b0031..0000000000 --- a/keyboards/ergodox_infinity/board_is31fl3731c.h +++ /dev/null @@ -1,110 +0,0 @@ -/* -Copyright 2016 Fred Sundvik - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef _GDISP_LLD_BOARD_H -#define _GDISP_LLD_BOARD_H - -static const I2CConfig i2ccfg = { - 400000 // clock speed (Hz); 400kHz max for IS31 -}; - -static const uint8_t led_mask[] = { - 0xFF, 0x00, /* C1-1 -> C1-16 */ - 0xFF, 0x00, /* C2-1 -> C2-16 */ - 0xFF, 0x00, /* C3-1 -> C3-16 */ - 0xFF, 0x00, /* C4-1 -> C4-16 */ - 0x3F, 0x00, /* C5-1 -> C5-16 */ - 0x00, 0x00, /* C6-1 -> C6-16 */ - 0x00, 0x00, /* C7-1 -> C7-16 */ - 0x00, 0x00, /* C8-1 -> C8-16 */ - 0x00, 0x00, /* C9-1 -> C9-16 */ -}; - -// The address of the LED -#define LA(c, r) (c + r * 16 ) -// Need to be an address that is not mapped, but inside the range of the controller matrix -#define NA LA(8, 8) - -// The numbers in the comments are the led numbers DXX on the PCB -// The mapping is taken from the schematic of left hand side -static const uint8_t led_mapping[GDISP_SCREEN_HEIGHT][GDISP_SCREEN_WIDTH] = { -// 45 44 43 42 41 40 39 - { LA(1, 1), LA(1, 0), LA(0, 4), LA(0, 3), LA(0, 2), LA(0, 1), LA(0, 0)}, -// 52 51 50 49 48 47 46 - { LA(2, 3), LA(2, 2), LA(2, 1), LA(2, 0), LA(1, 4), LA(1, 3), LA(1, 2) }, -// 58 57 56 55 54 53 N/A - { LA(3, 4), LA(3, 3), LA(3, 2), LA(3, 1), LA(3, 0), LA(2, 4), NA }, -// 67 66 65 64 63 62 61 - { LA(5, 3), LA(5, 2), LA(5, 1), LA(5, 0), LA(4, 4), LA(4, 3), LA(4, 2) }, -// 76 75 74 73 72 60 59 - { LA(7, 3), LA(7, 2), LA(7, 1), LA(7, 0), LA(6, 3), LA(4, 1), LA(4, 0) }, -// N/A N/A N/A N/A N/A N/A 68 - { NA, NA, NA, NA, NA, NA, LA(5, 4) }, -// N/A N/A N/A N/A 71 70 69 - { NA, NA, NA, NA, LA(6, 2), LA(6, 1), LA(6, 0) }, -}; - - -#define IS31_ADDR_DEFAULT 0x74 // AD connected to GND -#define IS31_TIMEOUT 5000 - -static GFXINLINE void init_board(GDisplay *g) { - (void) g; - /* I2C pins */ - palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL - palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA - palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL); - palClearPad(GPIOB, 16); - /* start I2C */ - i2cStart(&I2CD1, &i2ccfg); - // try high drive (from kiibohd) - I2CD1.i2c->C2 |= I2Cx_C2_HDRS; - // try glitch fixing (from kiibohd) - I2CD1.i2c->FLT = 4; -} - -static GFXINLINE void post_init_board(GDisplay *g) { - (void) g; -} - -static GFXINLINE const uint8_t* get_led_mask(GDisplay* g) { - (void) g; - return led_mask; -} - -static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y) -{ - (void) g; - return led_mapping[y][x]; -} - -static GFXINLINE void set_hardware_shutdown(GDisplay* g, bool shutdown) { - (void) g; - if(!shutdown) { - palSetPad(GPIOB, 16); - } - else { - palClearPad(GPIOB, 16); - } -} - -static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) { - (void) g; - i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, TIME_US2I(IS31_TIMEOUT)); -} - -#endif /* _GDISP_LLD_BOARD_H */ diff --git a/keyboards/ergodox_infinity/board_st7565.h b/keyboards/ergodox_infinity/board_st7565.h deleted file mode 100644 index 875ed9e65c..0000000000 --- a/keyboards/ergodox_infinity/board_st7565.h +++ /dev/null @@ -1,96 +0,0 @@ -/* - * This file is subject to the terms of the GFX License. If a copy of - * the license was not distributed with this file, you can obtain one at: - * - * http://ugfx.org/license.html - */ - -#ifndef _GDISP_LLD_BOARD_H -#define _GDISP_LLD_BOARD_H - -#include "quantum.h" - -#define ST7565_LCD_BIAS ST7565_LCD_BIAS_7 -#define ST7565_COM_SCAN ST7565_COM_SCAN_DEC -#define ST7565_PAGE_ORDER 0, 1, 2, 3 -/* - * Custom page order for several LCD boards, e.g. HEM12864-99 - * #define ST7565_PAGE_ORDER 4,5,6,7,0,1,2,3 - */ - -#define ST7565_A0_PIN C7 -#define ST7565_RST_PIN C8 -#define ST7565_MOSI_PIN C6 -#define ST7565_SCLK_PIN C5 -#define ST7565_SS_PIN C4 - -// DSPI Clock and Transfer Attributes -// Frame Size: 8 bits -// MSB First -// CLK Low by default -static const SPIConfig spi1config = { - // Operation complete callback or @p NULL. - .end_cb = NULL, - // The chip select line port - when not using pcs. - .ssport = PAL_PORT(ST7565_SS_PIN), - // brief The chip select line pad number - when not using pcs. - .sspad = PAL_PAD(ST7565_SS_PIN), - // SPI initialization data. - .tar0 = SPIx_CTARn_FMSZ(7) // Frame size = 8 bytes - | SPIx_CTARn_ASC(1) // After SCK Delay Scaler (min 50 ns) = 55.56ns - | SPIx_CTARn_DT(0) // Delay After Transfer Scaler (no minimum)= 27.78ns - | SPIx_CTARn_CSSCK(0) // PCS to SCK Delay Scaler (min 20 ns) = 27.78ns - | SPIx_CTARn_PBR(0) // Baud Rate Prescaler = 2 - | SPIx_CTARn_BR(0) // Baud rate (min 50ns) = 55.56ns -}; - -static GFXINLINE void acquire_bus(GDisplay *g) { - (void)g; - // Only the LCD is using the SPI bus, so no need to acquire - // spiAcquireBus(&SPID1); - spiSelect(&SPID1); -} - -static GFXINLINE void release_bus(GDisplay *g) { - (void)g; - // Only the LCD is using the SPI bus, so no need to release - // spiReleaseBus(&SPID1); - spiUnselect(&SPID1); -} - -static GFXINLINE void init_board(GDisplay *g) { - (void)g; - setPinOutput(ST7565_A0_PIN); - writePinHigh(ST7565_A0_PIN); - setPinOutput(ST7565_RST_PIN); - writePinHigh(ST7565_RST_PIN); - setPinOutput(ST7565_SS_PIN); - - palSetPadMode(PAL_PORT(ST7565_MOSI_PIN), PAL_PAD(ST7565_MOSI_PIN), PAL_MODE_ALTERNATIVE_2); - palSetPadMode(PAL_PORT(ST7565_SCLK_PIN), PAL_PAD(ST7565_SCLK_PIN), PAL_MODE_ALTERNATIVE_2); - - spiInit(); - spiStart(&SPID1, &spi1config); - release_bus(g); -} - -static GFXINLINE void post_init_board(GDisplay *g) { (void)g; } - -static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) { - (void)g; - writePin(ST7565_RST_PIN, !state); -} - -static GFXINLINE void write_cmd(GDisplay *g, gU8 cmd) { - (void)g; - writePinLow(ST7565_A0_PIN); - spiSend(&SPID1, 1, &cmd); -} - -static GFXINLINE void write_data(GDisplay *g, gU8 *data, gU16 length) { - (void)g; - writePinHigh(ST7565_A0_PIN); - spiSend(&SPID1, length, data); -} - -#endif /* _GDISP_LLD_BOARD_H */ diff --git a/keyboards/ergodox_infinity/config.h b/keyboards/ergodox_infinity/config.h index 357ddf6c51..5dcc707a5d 100644 --- a/keyboards/ergodox_infinity/config.h +++ b/keyboards/ergodox_infinity/config.h @@ -112,8 +112,6 @@ along with this program. If not, see . /* Set 0 if debouncing isn't needed */ #define DEBOUNCE 5 -#define VISUALIZER_USER_DATA_SIZE 16 - /* * Feature disable options * These options are also useful to firmware size reduction. diff --git a/keyboards/ergodox_infinity/ergodox_infinity.c b/keyboards/ergodox_infinity/ergodox_infinity.c index 8f5b068a72..d2a311ee8b 100644 --- a/keyboards/ergodox_infinity/ergodox_infinity.c +++ b/keyboards/ergodox_infinity/ergodox_infinity.c @@ -4,9 +4,6 @@ #include #include "eeconfig.h" #include "serial_link/system/serial_link.h" -#ifdef VISUALIZER_ENABLE -# include "lcd_backlight.h" -#endif #define RED_PIN 1 #define GREEN_PIN 2 @@ -87,11 +84,7 @@ static uint16_t cie_lightness(uint16_t v) { return y * 65535.0f; } -#ifdef VISUALIZER_ENABLE -void lcd_backlight_hal_color(uint16_t r, uint16_t g, uint16_t b) { -#else void ergodox_infinity_lcd_color(uint16_t r, uint16_t g, uint16_t b) { -#endif CHANNEL_RED.CnV = cie_lightness(r); CHANNEL_GREEN.CnV = cie_lightness(g); CHANNEL_BLUE.CnV = cie_lightness(b); @@ -108,12 +101,10 @@ void keyboard_pre_init_kb() { setPinOutput(B16); writePinHigh(B16); #endif -#ifndef VISUALIZER_ENABLE // The backlight always has to be initialized, otherwise it will stay lit lcd_backlight_hal_init(); -# ifdef ST7565_ENABLE +#ifdef ST7565_ENABLE ergodox_infinity_lcd_color(UINT16_MAX / 2, UINT16_MAX / 2, UINT16_MAX / 2); -# endif #endif keyboard_pre_init_user(); } diff --git a/keyboards/ergodox_infinity/ergodox_infinity.h b/keyboards/ergodox_infinity/ergodox_infinity.h index 39a82e46de..b9636b69be 100644 --- a/keyboards/ergodox_infinity/ergodox_infinity.h +++ b/keyboards/ergodox_infinity/ergodox_infinity.h @@ -79,9 +79,7 @@ inline void ergodox_led_all_set(uint8_t n) { ergodox_right_led_3_set(n); } -#ifndef VISUALIZER_ENABLE void ergodox_infinity_lcd_color(uint16_t r, uint16_t g, uint16_t b); -#endif #define XXX KC_NO diff --git a/keyboards/ergodox_infinity/gfxconf.h b/keyboards/ergodox_infinity/gfxconf.h deleted file mode 100644 index ca338399d3..0000000000 --- a/keyboards/ergodox_infinity/gfxconf.h +++ /dev/null @@ -1,27 +0,0 @@ -/** - * This file has a different license to the rest of the uGFX system. - * You can copy, modify and distribute this file as you see fit. - * You do not need to publish your source modifications to this file. - * The only thing you are not permitted to do is to relicense it - * under a different license. - */ - -/** - * Copy this file into your project directory and rename it as gfxconf.h - * Edit your copy to turn on the uGFX features you want to use. - * The values below are the defaults. - * - * Only remove the comments from lines where you want to change the - * default value. This allows definitions to be included from - * driver makefiles when required and provides the best future - * compatibility for your project. - * - * Please use spaces instead of tabs in this file. - */ - -#ifndef _GFXCONF_H -#define _GFXCONF_H - -#include "common_gfxconf.h" - -#endif /* _GFXCONF_H */ diff --git a/keyboards/ergodox_infinity/rules.mk b/keyboards/ergodox_infinity/rules.mk index 06b62f547d..b6922e1ee6 100644 --- a/keyboards/ergodox_infinity/rules.mk +++ b/keyboards/ergodox_infinity/rules.mk @@ -34,11 +34,4 @@ ST7565_ENABLE = yes LED_MATRIX_ENABLE = yes LED_MATRIX_DRIVER = IS31FL3731 -# Config for Visualizer (set VISUALIZER_ENABLE = yes and ST7565_ENABLE = no to use) -LCD_ENABLE = yes -LCD_BACKLIGHT_ENABLE = yes -LCD_DRIVER = st7565 -LCD_WIDTH = 128 -LCD_HEIGHT = 32 - LAYOUTS = ergodox diff --git a/keyboards/ergodox_infinity/simple_visualizer.h b/keyboards/ergodox_infinity/simple_visualizer.h deleted file mode 100644 index 73d0e08870..0000000000 --- a/keyboards/ergodox_infinity/simple_visualizer.h +++ /dev/null @@ -1,123 +0,0 @@ -/* Copyright 2017 Fred Sundvik - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#ifndef KEYBOARDS_ERGODOX_INFINITY_SIMPLE_VISUALIZER_H_ -#define KEYBOARDS_ERGODOX_INFINITY_SIMPLE_VISUALIZER_H_ - -// Currently we are assuming that both the backlight and LCD are enabled -// But it's entirely possible to write a custom visualizer that use only -// one of them -#ifndef LCD_BACKLIGHT_ENABLE -#error This visualizer needs that LCD backlight is enabled -#endif - -#ifndef LCD_ENABLE -#error This visualizer needs that LCD is enabled -#endif - -#include "visualizer.h" -#include "visualizer_keyframes.h" -#include "lcd_keyframes.h" -#include "lcd_backlight_keyframes.h" -#include "system/serial_link.h" -#include "led.h" -#include "default_animations.h" - -static const uint32_t logo_background_color = LCD_COLOR(0x00, 0x00, 0xFF); -static const uint32_t initial_color = LCD_COLOR(0, 0, 0); - -static bool initial_update = true; - -// Feel free to modify the animations below, or even add new ones if needed - -static keyframe_animation_t lcd_layer_display = { - .num_frames = 1, - .loop = false, - .frame_lengths = {gfxMillisecondsToTicks(0)}, - .frame_functions = {lcd_keyframe_display_layer_and_led_states} -}; - -// The color animation animates the LCD color when you change layers -static keyframe_animation_t color_animation = { - .num_frames = 2, - .loop = false, - // Note that there's a 200 ms no-operation frame, - // this prevents the color from changing when activating the layer - // momentarily - .frame_lengths = {gfxMillisecondsToTicks(200), gfxMillisecondsToTicks(500)}, - .frame_functions = {keyframe_no_operation, lcd_backlight_keyframe_animate_color}, -}; - -void initialize_user_visualizer(visualizer_state_t* state) { - // The brightness will be dynamically adjustable in the future - // But for now, change it here. - lcd_backlight_brightness(130); - state->current_lcd_color = initial_color; - state->target_lcd_color = logo_background_color; - initial_update = true; - start_keyframe_animation(&default_startup_animation); -} - - -// This function should be implemented by the keymap visualizer -// Don't change anything else than state->target_lcd_color and state->layer_text as that's the only thing -// that the simple_visualizer assumes that you are updating -// Also make sure that the buffer passed to state->layer_text remains valid until the previous animation is -// stopped. This can be done by either double buffering it or by using constant strings -static void get_visualizer_layer_and_color(visualizer_state_t* state); - -void update_user_visualizer_state(visualizer_state_t* state, visualizer_keyboard_status_t* prev_status) { - // Add more tests, change the colors and layer texts here - // Usually you want to check the high bits (higher layers first) - // because that's the order layers are processed for keypresses - // You can for check for example: - // state->status.layer - // state->status.default_layer - // state->status.leds (see led.h for available statuses) - - uint32_t prev_color = state->target_lcd_color; - const char* prev_layer_text = state->layer_text; - - get_visualizer_layer_and_color(state); - - if (initial_update || prev_color != state->target_lcd_color) { - start_keyframe_animation(&color_animation); - } - - if (initial_update || prev_layer_text != state->layer_text) { - start_keyframe_animation(&lcd_layer_display); - } - // You can also stop existing animations, and start your custom ones here - // remember that you should normally have only one animation for the LCD - // and one for the background. But you can also combine them if you want. -} - -void user_visualizer_suspend(visualizer_state_t* state) { - state->layer_text = "Suspending..."; - uint8_t hue = LCD_HUE(state->current_lcd_color); - uint8_t sat = LCD_SAT(state->current_lcd_color); - state->target_lcd_color = LCD_COLOR(hue, sat, 0); - start_keyframe_animation(&default_suspend_animation); -} - -void user_visualizer_resume(visualizer_state_t* state) { - state->current_lcd_color = initial_color; - state->target_lcd_color = logo_background_color; - initial_update = true; - start_keyframe_animation(&default_startup_animation); -} - -#endif /* KEYBOARDS_ERGODOX_INFINITY_SIMPLE_VISUALIZER_H_ */ diff --git a/keyboards/ergodox_infinity/visualizer.c b/keyboards/ergodox_infinity/visualizer.c deleted file mode 100644 index 1ea891e830..0000000000 --- a/keyboards/ergodox_infinity/visualizer.c +++ /dev/null @@ -1,328 +0,0 @@ -/* -Copyright 2016 Fred Sundvik - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -// Currently we are assuming that both the backlight and LCD are enabled -// But it's entirely possible to write a custom visualizer that use only -// one of them -#ifndef LCD_BACKLIGHT_ENABLE -#error This visualizer needs that LCD backlight is enabled -#endif - -#ifndef LCD_ENABLE -#error This visualizer needs that LCD is enabled -#endif - -#include "visualizer.h" -#include "visualizer_keyframes.h" -#include "lcd_keyframes.h" -#include "lcd_backlight_keyframes.h" -#include "default_animations.h" - -static const uint32_t logo_background_color = LCD_COLOR(0x00, 0x00, 0xFF); -static const uint32_t initial_color = LCD_COLOR(0, 0, 0); - -static const uint32_t led_emulation_colors[4] = { - LCD_COLOR(0, 0, 0), - LCD_COLOR(255, 255, 255), - LCD_COLOR(84, 255, 255), - LCD_COLOR(168, 255, 255), -}; - -static uint32_t next_led_target_color = 0; - -typedef enum { - LCD_STATE_INITIAL, - LCD_STATE_LAYER_BITMAP, - LCD_STATE_BITMAP_AND_LEDS, -} lcd_state_t; - -static lcd_state_t lcd_state = LCD_STATE_INITIAL; - -typedef struct { - uint8_t led_on; - uint8_t led1; - uint8_t led2; - uint8_t led3; -} visualizer_user_data_t; - -// Don't access from visualization function, use the visualizer state instead -static visualizer_user_data_t user_data_keyboard = { - .led_on = 0, - .led1 = LED_BRIGHTNESS_HI, - .led2 = LED_BRIGHTNESS_HI, - .led3 = LED_BRIGHTNESS_HI, -}; - -_Static_assert(sizeof(visualizer_user_data_t) <= VISUALIZER_USER_DATA_SIZE, - "Please increase the VISUALIZER_USER_DATA_SIZE"); - -// Feel free to modify the animations below, or even add new ones if needed - - -// The color animation animates the LCD color when you change layers -static keyframe_animation_t one_led_color = { - .num_frames = 1, - .loop = false, - .frame_lengths = {gfxMillisecondsToTicks(0)}, - .frame_functions = {lcd_backlight_keyframe_set_color}, -}; - -bool swap_led_target_color(keyframe_animation_t* animation, visualizer_state_t* state) { - uint32_t temp = next_led_target_color; - next_led_target_color = state->target_lcd_color; - state->target_lcd_color = temp; - return false; -} - -// The color animation animates the LCD color when you change layers -static keyframe_animation_t two_led_colors = { - .num_frames = 2, - .loop = true, - .frame_lengths = {gfxMillisecondsToTicks(1000), gfxMillisecondsToTicks(0)}, - .frame_functions = {lcd_backlight_keyframe_set_color, swap_led_target_color}, -}; - -// The LCD animation alternates between the layer name display and a -// bitmap that displays all active layers -static keyframe_animation_t lcd_bitmap_animation = { - .num_frames = 1, - .loop = false, - .frame_lengths = {gfxMillisecondsToTicks(0)}, - .frame_functions = {lcd_keyframe_display_layer_bitmap}, -}; - -static keyframe_animation_t lcd_bitmap_leds_animation = { - .num_frames = 2, - .loop = true, - .frame_lengths = {gfxMillisecondsToTicks(2000), gfxMillisecondsToTicks(2000)}, - .frame_functions = {lcd_keyframe_display_layer_bitmap, lcd_keyframe_display_led_states}, -}; - -void initialize_user_visualizer(visualizer_state_t* state) { - // The brightness will be dynamically adjustable in the future - // But for now, change it here. - lcd_backlight_brightness(130); - state->current_lcd_color = initial_color; - state->target_lcd_color = logo_background_color; - lcd_state = LCD_STATE_INITIAL; - start_keyframe_animation(&default_startup_animation); -} - -static inline bool is_led_on(visualizer_user_data_t* user_data, uint8_t num) { - return user_data->led_on & (1u << num); -} - -static uint8_t get_led_index_master(visualizer_user_data_t* user_data) { - for (int i=0; i < 3; i++) { - if (is_led_on(user_data, i)) { - return i + 1; - } - } - return 0; -} - -static uint8_t get_led_index_slave(visualizer_user_data_t* user_data) { - uint8_t master_index = get_led_index_master(user_data); - if (master_index!=0) { - for (int i=master_index; i < 3; i++) { - if (is_led_on(user_data, i)) { - return i + 1; - } - } - } - - return 0; -} - -static uint8_t get_secondary_led_index(visualizer_user_data_t* user_data) { - if (is_led_on(user_data, 0) && - is_led_on(user_data, 1) && - is_led_on(user_data, 2)) { - return 3; - } - return 0; -} - -static uint8_t get_brightness(visualizer_user_data_t* user_data, uint8_t index) { - switch (index) { - case 1: - return user_data->led1; - case 2: - return user_data->led2; - case 3: - return user_data->led3; - } - return 0; -} - -static void update_emulated_leds(visualizer_state_t* state, visualizer_keyboard_status_t* prev_status) { - visualizer_user_data_t* user_data_new = (visualizer_user_data_t*)state->status.user_data; - visualizer_user_data_t* user_data_old = (visualizer_user_data_t*)prev_status->user_data; - - uint8_t new_index; - uint8_t old_index; - - if (is_keyboard_master()) { - new_index = get_led_index_master(user_data_new); - old_index = get_led_index_master(user_data_old); - } - else { - new_index = get_led_index_slave(user_data_new); - old_index = get_led_index_slave(user_data_old); - } - uint8_t new_secondary_index = get_secondary_led_index(user_data_new); - uint8_t old_secondary_index = get_secondary_led_index(user_data_old); - - uint8_t old_brightness = get_brightness(user_data_old, old_index); - uint8_t new_brightness = get_brightness(user_data_new, new_index); - - uint8_t old_secondary_brightness = get_brightness(user_data_old, old_secondary_index); - uint8_t new_secondary_brightness = get_brightness(user_data_new, new_secondary_index); - - if (lcd_state == LCD_STATE_INITIAL || - new_index != old_index || - new_secondary_index != old_secondary_index || - new_brightness != old_brightness || - new_secondary_brightness != old_secondary_brightness) { - - if (new_secondary_index != 0) { - state->target_lcd_color = change_lcd_color_intensity( - led_emulation_colors[new_index], new_brightness); - next_led_target_color = change_lcd_color_intensity( - led_emulation_colors[new_secondary_index], new_secondary_brightness); - - stop_keyframe_animation(&one_led_color); - start_keyframe_animation(&two_led_colors); - } else { - state->target_lcd_color = change_lcd_color_intensity( - led_emulation_colors[new_index], new_brightness); - stop_keyframe_animation(&two_led_colors); - start_keyframe_animation(&one_led_color); - } - } -} - -static void update_lcd_text(visualizer_state_t* state, visualizer_keyboard_status_t* prev_status) { - if (state->status.leds) { - if (lcd_state != LCD_STATE_BITMAP_AND_LEDS || - state->status.leds != prev_status->leds || - state->status.layer != prev_status->layer || - state->status.default_layer != prev_status->default_layer) { - - // NOTE: that it doesn't matter if the animation isn't playing, stop will do nothing in that case - stop_keyframe_animation(&lcd_bitmap_animation); - - lcd_state = LCD_STATE_BITMAP_AND_LEDS; - // For information: - // The logic in this function makes sure that this doesn't happen, but if you call start on an - // animation that is already playing it will be restarted. - start_keyframe_animation(&lcd_bitmap_leds_animation); - } - } else { - if (lcd_state != LCD_STATE_LAYER_BITMAP || - state->status.layer != prev_status->layer || - state->status.default_layer != prev_status->default_layer) { - - stop_keyframe_animation(&lcd_bitmap_leds_animation); - - lcd_state = LCD_STATE_LAYER_BITMAP; - start_keyframe_animation(&lcd_bitmap_animation); - } - } -} - -void update_user_visualizer_state(visualizer_state_t* state, visualizer_keyboard_status_t* prev_status) { - // Check the status here to start and stop animations - // You might have to save some state, like the current animation here so that you can start the right - // This function is called every time the status changes - - // NOTE that this is called from the visualizer thread, so don't access anything else outside the status - // This is also important because the slave won't have access to the active layer for example outside the - // status. - - update_emulated_leds(state, prev_status); - update_lcd_text(state, prev_status); - -} - -void user_visualizer_suspend(visualizer_state_t* state) { - state->layer_text = "Suspending..."; - uint8_t hue = LCD_HUE(state->current_lcd_color); - uint8_t sat = LCD_SAT(state->current_lcd_color); - state->target_lcd_color = LCD_COLOR(hue, sat, 0); - start_keyframe_animation(&default_suspend_animation); -} - -void user_visualizer_resume(visualizer_state_t* state) { - state->current_lcd_color = initial_color; - state->target_lcd_color = logo_background_color; - lcd_state = LCD_STATE_INITIAL; - start_keyframe_animation(&default_startup_animation); -} - -void ergodox_board_led_on(void){ - // No board led support -} - -void ergodox_right_led_1_on(void){ - user_data_keyboard.led_on |= (1u << 0); - visualizer_set_user_data(&user_data_keyboard); -} - -void ergodox_right_led_2_on(void){ - user_data_keyboard.led_on |= (1u << 1); - visualizer_set_user_data(&user_data_keyboard); -} - -void ergodox_right_led_3_on(void){ - user_data_keyboard.led_on |= (1u << 2); - visualizer_set_user_data(&user_data_keyboard); -} - -void ergodox_board_led_off(void){ - // No board led support -} - -void ergodox_right_led_1_off(void){ - user_data_keyboard.led_on &= ~(1u << 0); - visualizer_set_user_data(&user_data_keyboard); -} - -void ergodox_right_led_2_off(void){ - user_data_keyboard.led_on &= ~(1u << 1); - visualizer_set_user_data(&user_data_keyboard); -} - -void ergodox_right_led_3_off(void){ - user_data_keyboard.led_on &= ~(1u << 2); - visualizer_set_user_data(&user_data_keyboard); -} - -void ergodox_right_led_1_set(uint8_t n) { - user_data_keyboard.led1 = n; - visualizer_set_user_data(&user_data_keyboard); -} - -void ergodox_right_led_2_set(uint8_t n) { - user_data_keyboard.led2 = n; - visualizer_set_user_data(&user_data_keyboard); -} - -void ergodox_right_led_3_set(uint8_t n) { - user_data_keyboard.led3 = n; - visualizer_set_user_data(&user_data_keyboard); -} diff --git a/keyboards/whitefox/gfxconf.h b/keyboards/whitefox/gfxconf.h deleted file mode 100644 index ca338399d3..0000000000 --- a/keyboards/whitefox/gfxconf.h +++ /dev/null @@ -1,27 +0,0 @@ -/** - * This file has a different license to the rest of the uGFX system. - * You can copy, modify and distribute this file as you see fit. - * You do not need to publish your source modifications to this file. - * The only thing you are not permitted to do is to relicense it - * under a different license. - */ - -/** - * Copy this file into your project directory and rename it as gfxconf.h - * Edit your copy to turn on the uGFX features you want to use. - * The values below are the defaults. - * - * Only remove the comments from lines where you want to change the - * default value. This allows definitions to be included from - * driver makefiles when required and provides the best future - * compatibility for your project. - * - * Please use spaces instead of tabs in this file. - */ - -#ifndef _GFXCONF_H -#define _GFXCONF_H - -#include "common_gfxconf.h" - -#endif /* _GFXCONF_H */ diff --git a/keyboards/whitefox/visualizer.c b/keyboards/whitefox/visualizer.c deleted file mode 100644 index 3846e92789..0000000000 --- a/keyboards/whitefox/visualizer.c +++ /dev/null @@ -1,54 +0,0 @@ -/* Copyright 2017 Fred Sundvik - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include "visualizer.h" -#include "visualizer_keyframes.h" -#include "default_animations.h" - -static bool initial_update = true; - -// Feel free to modify the animations below, or even add new ones if needed - -void initialize_user_visualizer(visualizer_state_t *state) { - // The brightness will be dynamically adjustable in the future - // But for now, change it here. - initial_update = true; - start_keyframe_animation(&default_startup_animation); -} - -void update_user_visualizer_state(visualizer_state_t *state, visualizer_keyboard_status_t *prev_status) { - // Add more tests, change the colors and layer texts here - // Usually you want to check the high bits (higher layers first) - // because that's the order layers are processed for keypresses - // You can for check for example: - // state->status.layer - // state->status.default_layer - // state->status.leds (see led.h for available statuses) - - if (initial_update) { - initial_update = false; - start_keyframe_animation(&led_test_animation); - } -} - -void user_visualizer_suspend(visualizer_state_t *state) { - start_keyframe_animation(&default_suspend_animation); -} - -void user_visualizer_resume(visualizer_state_t *state) { - initial_update = true; - start_keyframe_animation(&default_startup_animation); -} diff --git a/lib/ugfx b/lib/ugfx deleted file mode 160000 index 40b48f470a..0000000000 --- a/lib/ugfx +++ /dev/null @@ -1 +0,0 @@ -Subproject commit 40b48f470addad6a4fb1177de1a69a181158739b diff --git a/quantum/keyboard.c b/quantum/keyboard.c index 6054faa03b..c2e2234f94 100644 --- a/quantum/keyboard.c +++ b/quantum/keyboard.c @@ -64,9 +64,6 @@ along with this program. If not, see . #ifdef SERIAL_LINK_ENABLE # include "serial_link/system/serial_link.h" #endif -#ifdef VISUALIZER_ENABLE -# include "visualizer/visualizer.h" -#endif #ifdef POINTING_DEVICE_ENABLE # include "pointing_device.h" #endif @@ -381,7 +378,6 @@ void switch_events(uint8_t row, uint8_t col, bool pressed) { * * * scan matrix * * handle mouse movements - * * run visualizer code * * handle midi commands * * light LEDs * @@ -519,10 +515,6 @@ MATRIX_LOOP_END: serial_link_update(); #endif -#ifdef VISUALIZER_ENABLE - visualizer_update(default_layer_state, layer_state, visualizer_get_mods(), host_keyboard_leds()); -#endif - #ifdef POINTING_DEVICE_ENABLE pointing_device_task(); #endif diff --git a/quantum/visualizer/LICENSE.md b/quantum/visualizer/LICENSE.md deleted file mode 100644 index 22d4c3f08b..0000000000 --- a/quantum/visualizer/LICENSE.md +++ /dev/null @@ -1,29 +0,0 @@ -The files in this project are licensed under the MIT license -It uses the following libraries -uGFX - with it's own license, see the license.html file in the uGFX subfolder for more information -tmk_core - is indirectly used and not included in the repository. It's licensed under the GPLv2 license -Chibios - which is used by tmk_core is licensed under GPLv3. - -Therefore the effective license for any project using the library is GPLv3 - -The MIT License (MIT) - -Copyright (c) 2016 Fred Sundvik - -Permission is hereby granted, free of charge, to any person obtaining a copy -of this software and associated documentation files (the "Software"), to deal -in the Software without restriction, including without limitation the rights -to use, copy, modify, merge, publish, distribute, sublicense, and/or sell -copies of the Software, and to permit persons to whom the Software is -furnished to do so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. diff --git a/quantum/visualizer/common_gfxconf.h b/quantum/visualizer/common_gfxconf.h deleted file mode 100644 index e0735b37d0..0000000000 --- a/quantum/visualizer/common_gfxconf.h +++ /dev/null @@ -1,354 +0,0 @@ -/** - * This file has a different license to the rest of the uGFX system. - * You can copy, modify and distribute this file as you see fit. - * You do not need to publish your source modifications to this file. - * The only thing you are not permitted to do is to relicense it - * under a different license. - */ - -/** - * Copy this file into your project directory and rename it as gfxconf.h - * Edit your copy to turn on the uGFX features you want to use. - * The values below are the defaults. - * - * Only remove the comments from lines where you want to change the - * default value. This allows definitions to be included from - * driver makefiles when required and provides the best future - * compatibility for your project. - * - * Please use spaces instead of tabs in this file. - */ - -#pragma once - -/////////////////////////////////////////////////////////////////////////// -// GFX - Compatibility options // -/////////////////////////////////////////////////////////////////////////// -//#define GFX_COMPAT_V2 GFXON -//#define GFX_COMPAT_OLDCOLORS GFXON - -/////////////////////////////////////////////////////////////////////////// -// GOS - One of these must be defined, preferably in your Makefile // -/////////////////////////////////////////////////////////////////////////// -//#define GFX_USE_OS_CHIBIOS GFXOFF -//#define GFX_USE_OS_FREERTOS GFXOFF -// #define GFX_FREERTOS_USE_TRACE GFXOFF -//#define GFX_USE_OS_WIN32 GFXOFF -//#define GFX_USE_OS_LINUX GFXOFF -//#define GFX_USE_OS_OSX GFXOFF -//#define GFX_USE_OS_ECOS GFXOFF -//#define GFX_USE_OS_RAWRTOS GFXOFF -//#define GFX_USE_OS_ARDUINO GFXOFF -//#define GFX_USE_OS_KEIL GFXOFF -//#define GFX_USE_OS_RTX5 GFXOFF -//#define GFX_USE_OS_CMSIS GFXOFF -//#define GFX_USE_OS_CMSIS2 GFXOFF -//#define GFX_USE_OS_RAW32 GFXOFF -//#define GFX_USE_OS_ZEPHYR GFXOFF -//#define GFX_USE_OS_NIOS GFXOFF -//#define GFX_USE_OS_QT GFXOFF -// #define INTERRUPTS_OFF() optional_code -// #define INTERRUPTS_ON() optional_code - -// Options that (should where relevant) apply to all operating systems -#define GFX_NO_INLINE GFXON -// #define GFX_COMPILER GFX_COMPILER_UNKNOWN -// #define GFX_SHOW_COMPILER GFXOFF -// #define GFX_CPU GFX_CPU_UNKNOWN -// #define GFX_CPU_NO_ALIGNMENT_FAULTS GFXOFF -// #define GFX_CPU_ENDIAN GFX_CPU_ENDIAN_UNKNOWN -// #define GFX_OS_HEAP_SIZE 0 -// #define GFX_OS_NO_INIT GFXOFF -// #define GFX_OS_INIT_NO_WARNING GFXOFF -// #define GFX_OS_PRE_INIT_FUNCTION myHardwareInitRoutine -// #define GFX_OS_EXTRA_INIT_FUNCTION myOSInitRoutine -// #define GFX_OS_EXTRA_DEINIT_FUNCTION myOSDeInitRoutine -// #define GFX_OS_CALL_UGFXMAIN GFXOFF -// #define GFX_OS_UGFXMAIN_STACKSIZE 0 -// #define GFX_EMULATE_MALLOC GFXOFF -// #define GFX_MEM_LT64K GFXOFF - -/////////////////////////////////////////////////////////////////////////// -// GDISP // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GDISP GFXON - -//#define GDISP_NEED_AUTOFLUSH GFXOFF -//#define GDISP_NEED_TIMERFLUSH GFXOFF -//#define GDISP_NEED_VALIDATION GFXON -//#define GDISP_NEED_CLIP GFXON -#define GDISP_NEED_CIRCLE GFXON -//#define GDISP_NEED_DUALCIRCLE GFXOFF -#define GDISP_NEED_ELLIPSE GFXON -#define GDISP_NEED_ARC GFXON -#define GDISP_NEED_ARCSECTORS GFXON -#define GDISP_NEED_CONVEX_POLYGON GFXON -//#define GDISP_NEED_SCROLL GFXOFF -#define GDISP_NEED_PIXELREAD GFXON -#define GDISP_NEED_CONTROL GFXON -//#define GDISP_NEED_QUERY GFXOFF -//#define GDISP_NEED_MULTITHREAD GFXOFF -//#define GDISP_NEED_STREAMING GFXOFF -#define GDISP_NEED_TEXT GFXON -// #define GDISP_NEED_TEXT_WORDWRAP GFXOFF -// #define GDISP_NEED_TEXT_BOXPADLR 1 -// #define GDISP_NEED_TEXT_BOXPADTB 1 -// #define GDISP_NEED_ANTIALIAS GFXOFF -// #define GDISP_NEED_UTF8 GFXOFF -#define GDISP_NEED_TEXT_KERNING GFXON -// #define GDISP_INCLUDE_FONT_UI1 GFXOFF -// #define GDISP_INCLUDE_FONT_UI2 GFXOFF // The smallest preferred font. -// #define GDISP_INCLUDE_FONT_LARGENUMBERS GFXOFF -// #define GDISP_INCLUDE_FONT_DEJAVUSANS10 GFXOFF -// #define GDISP_INCLUDE_FONT_DEJAVUSANS12 GFXOFF -// #define GDISP_INCLUDE_FONT_DEJAVUSANS16 GFXOFF -// #define GDISP_INCLUDE_FONT_DEJAVUSANS20 GFXOFF -// #define GDISP_INCLUDE_FONT_DEJAVUSANS24 GFXOFF -// #define GDISP_INCLUDE_FONT_DEJAVUSANS32 GFXOFF -#define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12 GFXON -// #define GDISP_INCLUDE_FONT_FIXED_10X20 GFXOFF -// #define GDISP_INCLUDE_FONT_FIXED_7X14 GFXOFF -#define GDISP_INCLUDE_FONT_FIXED_5X8 GFXON -// #define GDISP_INCLUDE_FONT_DEJAVUSANS12_AA GFXOFF -// #define GDISP_INCLUDE_FONT_DEJAVUSANS16_AA GFXOFF -// #define GDISP_INCLUDE_FONT_DEJAVUSANS20_AA GFXOFF -// #define GDISP_INCLUDE_FONT_DEJAVUSANS24_AA GFXOFF -// #define GDISP_INCLUDE_FONT_DEJAVUSANS32_AA GFXOFF -// #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12_AA GFXOFF -// #define GDISP_INCLUDE_USER_FONTS GFXOFF - -//#define GDISP_NEED_IMAGE GFXOFF -// #define GDISP_NEED_IMAGE_NATIVE GFXOFF -// #define GDISP_NEED_IMAGE_GIF GFXOFF -// #define GDISP_IMAGE_GIF_BLIT_BUFFER_SIZE 32 -// #define GDISP_NEED_IMAGE_BMP GFXOFF -// #define GDISP_NEED_IMAGE_BMP_1 GFXON -// #define GDISP_NEED_IMAGE_BMP_4 GFXON -// #define GDISP_NEED_IMAGE_BMP_4_RLE GFXON -// #define GDISP_NEED_IMAGE_BMP_8 GFXON -// #define GDISP_NEED_IMAGE_BMP_8_RLE GFXON -// #define GDISP_NEED_IMAGE_BMP_16 GFXON -// #define GDISP_NEED_IMAGE_BMP_24 GFXON -// #define GDISP_NEED_IMAGE_BMP_32 GFXON -// #define GDISP_IMAGE_BMP_BLIT_BUFFER_SIZE 32 -// #define GDISP_NEED_IMAGE_JPG GFXOFF -// #define GDISP_NEED_IMAGE_PNG GFXOFF -// #define GDISP_NEED_IMAGE_PNG_INTERLACED GFXOFF -// #define GDISP_NEED_IMAGE_PNG_TRANSPARENCY GFXON -// #define GDISP_NEED_IMAGE_PNG_BACKGROUND GFXON -// #define GDISP_NEED_IMAGE_PNG_ALPHACLIFF 32 -// #define GDISP_NEED_IMAGE_PNG_PALETTE_124 GFXON -// #define GDISP_NEED_IMAGE_PNG_PALETTE_8 GFXON -// #define GDISP_NEED_IMAGE_PNG_GRAYSCALE_124 GFXON -// #define GDISP_NEED_IMAGE_PNG_GRAYSCALE_8 GFXON -// #define GDISP_NEED_IMAGE_PNG_GRAYSCALE_16 GFXON -// #define GDISP_NEED_IMAGE_PNG_GRAYALPHA_8 GFXON -// #define GDISP_NEED_IMAGE_PNG_GRAYALPHA_16 GFXON -// #define GDISP_NEED_IMAGE_PNG_RGB_8 GFXON -// #define GDISP_NEED_IMAGE_PNG_RGB_16 GFXON -// #define GDISP_NEED_IMAGE_PNG_RGBALPHA_8 GFXON -// #define GDISP_NEED_IMAGE_PNG_RGBALPHA_16 GFXON -// #define GDISP_IMAGE_PNG_BLIT_BUFFER_SIZE 32 -// #define GDISP_IMAGE_PNG_FILE_BUFFER_SIZE 8 -// #define GDISP_IMAGE_PNG_Z_BUFFER_SIZE 32768 -// #define GDISP_NEED_IMAGE_ACCOUNTING GFXOFF - -//#define GDISP_NEED_PIXMAP GFXOFF -// #define GDISP_NEED_PIXMAP_IMAGE GFXOFF - -//#define GDISP_DEFAULT_ORIENTATION gOrientationLandscape // If not defined the native hardware orientation is used. -//#define GDISP_LINEBUF_SIZE 128 -//#define GDISP_STARTUP_COLOR GFX_BLACK -#define GDISP_NEED_STARTUP_LOGO GFXOFF - -//#define GDISP_TOTAL_DISPLAYS 1 - -//#define GDISP_DRIVER_LIST GDISPVMT_Win32, GDISPVMT_Win32 -#ifdef GDISP_DRIVER_LIST -// // For code and speed optimization define as GFXON or GFXOFF if all controllers have the same capability -# define GDISP_HARDWARE_STREAM_WRITE GFXOFF -# define GDISP_HARDWARE_STREAM_READ GFXOFF -# define GDISP_HARDWARE_STREAM_POS GFXOFF -# define GDISP_HARDWARE_DRAWPIXEL GFXON -# define GDISP_HARDWARE_CLEARS GFXOFF -# define GDISP_HARDWARE_FILLS GFXOFF -//#define GDISP_HARDWARE_BITFILLS GFXOFF -# define GDISP_HARDWARE_SCROLL GFXOFF -# define GDISP_HARDWARE_PIXELREAD GFXON -# define GDISP_HARDWARE_CONTROL GFXON -# define GDISP_HARDWARE_QUERY GFXOFF -# define GDISP_HARDWARE_CLIP GFXOFF - -# define GDISP_PIXELFORMAT GDISP_PIXELFORMAT_RGB888 -#endif - -#define GDISP_USE_GFXNET GFXOFF -// #define GDISP_GFXNET_PORT 13001 -// #define GDISP_GFXNET_CUSTOM_LWIP_STARTUP GFXOFF -// #define GDISP_DONT_WAIT_FOR_NET_DISPLAY GFXOFF -// #define GDISP_GFXNET_UNSAFE_SOCKETS GFXOFF - -/////////////////////////////////////////////////////////////////////////// -// GWIN // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GWIN GFXOFF - -//#define GWIN_NEED_WINDOWMANAGER GFXOFF -// #define GWIN_REDRAW_IMMEDIATE GFXOFF -// #define GWIN_REDRAW_SINGLEOP GFXOFF -// #define GWIN_NEED_FLASHING GFXOFF -// #define GWIN_FLASHING_PERIOD 250 - -//#define GWIN_NEED_CONSOLE GFXOFF -// #define GWIN_CONSOLE_USE_HISTORY GFXOFF -// #define GWIN_CONSOLE_HISTORY_AVERAGING GFXOFF -// #define GWIN_CONSOLE_HISTORY_ATCREATE GFXOFF -// #define GWIN_CONSOLE_ESCSEQ GFXOFF -// #define GWIN_CONSOLE_USE_BASESTREAM GFXOFF -// #define GWIN_CONSOLE_USE_FLOAT GFXOFF -//#define GWIN_NEED_GRAPH GFXOFF -//#define GWIN_NEED_GL3D GFXOFF - -//#define GWIN_NEED_WIDGET GFXOFF -//#define GWIN_FOCUS_HIGHLIGHT_WIDTH 1 -// #define GWIN_NEED_LABEL GFXOFF -// #define GWIN_LABEL_ATTRIBUTE GFXOFF -// #define GWIN_NEED_BUTTON GFXOFF -// #define GWIN_BUTTON_LAZY_RELEASE GFXOFF -// #define GWIN_NEED_SLIDER GFXOFF -// #define GWIN_SLIDER_NOSNAP GFXOFF -// #define GWIN_SLIDER_DEAD_BAND 5 -// #define GWIN_SLIDER_TOGGLE_INC 20 -// #define GWIN_NEED_CHECKBOX GFXOFF -// #define GWIN_NEED_IMAGE GFXOFF -// #define GWIN_NEED_IMAGE_ANIMATION GFXOFF -// #define GWIN_NEED_RADIO GFXOFF -// #define GWIN_NEED_LIST GFXOFF -// #define GWIN_NEED_LIST_IMAGES GFXOFF -// #define GWIN_NEED_PROGRESSBAR GFXOFF -// #define GWIN_PROGRESSBAR_AUTO GFXOFF -// #define GWIN_NEED_KEYBOARD GFXOFF -// #define GWIN_KEYBOARD_DEFAULT_LAYOUT VirtualKeyboard_English1 -// #define GWIN_NEED_KEYBOARD_ENGLISH1 GFXON -// #define GWIN_NEED_TEXTEDIT GFXOFF -// #define GWIN_FLAT_STYLING GFXOFF -// #define GWIN_WIDGET_TAGS GFXOFF - -//#define GWIN_NEED_CONTAINERS GFXOFF -// #define GWIN_NEED_CONTAINER GFXOFF -// #define GWIN_NEED_FRAME GFXOFF -// #define GWIN_NEED_TABSET GFXOFF -// #define GWIN_TABSET_TABHEIGHT 18 - -/////////////////////////////////////////////////////////////////////////// -// GTRANS // -/////////////////////////////////////////////////////////////////////////// -//#define GFX_USE_GTRANS GFXOFF - -/////////////////////////////////////////////////////////////////////////// -// GEVENT // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GEVENT GFXON - -//#define GEVENT_ASSERT_NO_RESOURCE GFXOFF -//#define GEVENT_MAXIMUM_SIZE 32 -//#define GEVENT_MAX_SOURCE_LISTENERS 32 - -/////////////////////////////////////////////////////////////////////////// -// GTIMER // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GTIMER GFXOFF - -//#define GTIMER_THREAD_PRIORITY gThreadpriorityHigh -//#define GTIMER_THREAD_WORKAREA_SIZE 2048 - -/////////////////////////////////////////////////////////////////////////// -// GQUEUE // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GQUEUE GFXOFF - -//#define GQUEUE_NEED_ASYNC GFXOFF -//#define GQUEUE_NEED_GSYNC GFXOFF -//#define GQUEUE_NEED_FSYNC GFXOFF -//#define GQUEUE_NEED_BUFFERS GFXOFF - -/////////////////////////////////////////////////////////////////////////// -// GINPUT // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GINPUT GFXOFF - -//#define GINPUT_NEED_MOUSE GFXOFF -// #define GINPUT_TOUCH_STARTRAW GFXOFF -// #define GINPUT_TOUCH_NOTOUCH GFXOFF -// #define GINPUT_TOUCH_NOCALIBRATE GFXOFF -// #define GINPUT_TOUCH_NOCALIBRATE_GUI GFXOFF -// #define GINPUT_MOUSE_POLL_PERIOD 25 -// #define GINPUT_MOUSE_CLICK_TIME 300 -// #define GINPUT_TOUCH_CXTCLICK_TIME 700 -// #define GINPUT_TOUCH_USER_CALIBRATION_LOAD GFXOFF -// #define GINPUT_TOUCH_USER_CALIBRATION_SAVE GFXOFF -// #define GMOUSE_DRIVER_LIST GMOUSEVMT_Win32, GMOUSEVMT_Win32 -// #define GINPUT_TOUCH_CALIBRATION_FONT1 "* Double" -// #define GINPUT_TOUCH_CALIBRATION_FONT2 "* Narrow" -// #define GINPUT_TOUCH_CALIBRATION_TITLE "Calibration" -// #define GINPUT_TOUCH_CALIBRATION_ERROR "Calibration Failed!" -//#define GINPUT_NEED_KEYBOARD GFXOFF -// #define GINPUT_KEYBOARD_POLL_PERIOD 200 -// #define GKEYBOARD_DRIVER_LIST GKEYBOARDVMT_Win32, GKEYBOARDVMT_Win32 -// #define GKEYBOARD_LAYOUT_OFF GFXOFF -// #define GKEYBOARD_LAYOUT_SCANCODE2_US GFXOFF -//#define GINPUT_NEED_TOGGLE GFXOFF -//#define GINPUT_NEED_DIAL GFXOFF - -/////////////////////////////////////////////////////////////////////////// -// GFILE // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GFILE GFXOFF - -//#define GFILE_NEED_PRINTG GFXOFF -//#define GFILE_NEED_SCANG GFXOFF -//#define GFILE_NEED_STRINGS GFXOFF -//#define GFILE_NEED_FILELISTS GFXOFF -//#define GFILE_NEED_STDIO GFXOFF -//#define GFILE_NEED_NOAUTOMOUNT GFXOFF -//#define GFILE_NEED_NOAUTOSYNC GFXOFF - -//#define GFILE_NEED_MEMFS GFXOFF -//#define GFILE_NEED_ROMFS GFXOFF -//#define GFILE_NEED_RAMFS GFXOFF -//#define GFILE_NEED_FATFS GFXOFF -//#define GFILE_NEED_NATIVEFS GFXOFF -//#define GFILE_NEED_CHBIOSFS GFXOFF -//#define GFILE_NEED_USERFS GFXOFF - -//#define GFILE_ALLOW_FLOATS GFXOFF -//#define GFILE_ALLOW_DEVICESPECIFIC GFXOFF -//#define GFILE_MAX_GFILES 3 - -/////////////////////////////////////////////////////////////////////////// -// GADC // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GADC GFXOFF -// #define GADC_MAX_LOWSPEED_DEVICES 4 - -/////////////////////////////////////////////////////////////////////////// -// GAUDIO // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GAUDIO GFXOFF -// #define GAUDIO_NEED_PLAY GFXOFF -// #define GAUDIO_NEED_RECORD GFXOFF - -/////////////////////////////////////////////////////////////////////////// -// GMISC // -/////////////////////////////////////////////////////////////////////////// -#define GFX_USE_GMISC GFXON - -//#define GMISC_NEED_ARRAYOPS GFXOFF -//#define GMISC_NEED_FASTTRIG GFXOFF -//#define GMISC_NEED_FIXEDTRIG GFXOFF -//#define GMISC_NEED_INVSQRT GFXOFF -// #define GMISC_INVSQRT_MIXED_ENDIAN GFXOFF -// #define GMISC_INVSQRT_REAL_SLOW GFXOFF -#define GMISC_NEED_MATRIXFLOAT2D GFXON -#define GMISC_NEED_MATRIXFIXED2D GFXOFF -//#define GMISC_NEED_HITTEST_POLY GFXOFF diff --git a/quantum/visualizer/default_animations.c b/quantum/visualizer/default_animations.c deleted file mode 100644 index 2f43c67cc8..0000000000 --- a/quantum/visualizer/default_animations.c +++ /dev/null @@ -1,177 +0,0 @@ -/* Copyright 2017 Fred Sundvik - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#if defined(VISUALIZER_ENABLE) - -# include "default_animations.h" -# include "visualizer.h" -# ifdef LCD_ENABLE -# include "lcd_keyframes.h" -# endif -# ifdef LCD_BACKLIGHT_ENABLE -# include "lcd_backlight_keyframes.h" -# endif - -# ifdef BACKLIGHT_ENABLE -# include "led_backlight_keyframes.h" -# endif - -# include "visualizer_keyframes.h" - -# if defined(LCD_ENABLE) || defined(LCD_BACKLIGHT_ENABLE) || defined(BACKLIGHT_ENABLE) - -static bool keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state) { -# ifdef LCD_ENABLE - lcd_keyframe_enable(animation, state); -# endif -# ifdef LCD_BACKLIGHT_ENABLE - lcd_backlight_keyframe_enable(animation, state); -# endif -# ifdef BACKLIGHT_ENABLE - led_backlight_keyframe_enable(animation, state); -# endif - return false; -} - -static bool keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state) { -# ifdef LCD_ENABLE - lcd_keyframe_disable(animation, state); -# endif -# ifdef LCD_BACKLIGHT_ENABLE - lcd_backlight_keyframe_disable(animation, state); -# endif -# ifdef BACKLIGHT_ENABLE - led_backlight_keyframe_disable(animation, state); -# endif - return false; -} - -static bool keyframe_fade_in(keyframe_animation_t* animation, visualizer_state_t* state) { - bool ret = false; -# ifdef LCD_BACKLIGHT_ENABLE - ret |= lcd_backlight_keyframe_animate_color(animation, state); -# endif -# ifdef BACKLIGHT_ENABLE - ret |= led_backlight_keyframe_fade_in_all(animation, state); -# endif - return ret; -} - -static bool keyframe_fade_out(keyframe_animation_t* animation, visualizer_state_t* state) { - bool ret = false; -# ifdef LCD_BACKLIGHT_ENABLE - ret |= lcd_backlight_keyframe_animate_color(animation, state); -# endif -# ifdef BACKLIGHT_ENABLE - ret |= led_backlight_keyframe_fade_out_all(animation, state); -# endif - return ret; -} - -// Don't worry, if the startup animation is long, you can use the keyboard like normal -// during that time -keyframe_animation_t default_startup_animation = { -# if LCD_ENABLE - .num_frames = 3, -# else - .num_frames = 2, -# endif - .loop = false, - .frame_lengths = {0, -# if LCD_ENABLE - 0, -# endif - gfxMillisecondsToTicks(5000)}, - .frame_functions = - { - keyframe_enable, -# if LCD_ENABLE - lcd_keyframe_draw_logo, -# endif - keyframe_fade_in, - }, -}; - -keyframe_animation_t default_suspend_animation = { -# if LCD_ENABLE - .num_frames = 3, -# else - .num_frames = 2, -# endif - .loop = false, - .frame_lengths = - { -# if LCD_ENABLE - 0, -# endif - gfxMillisecondsToTicks(1000), 0}, - .frame_functions = - { -# if LCD_ENABLE - lcd_keyframe_display_layer_text, -# endif - keyframe_fade_out, - keyframe_disable, - }, -}; -# endif - -# if defined(BACKLIGHT_ENABLE) -# define CROSSFADE_TIME 1000 -# define GRADIENT_TIME 3000 - -keyframe_animation_t led_test_animation = { - .num_frames = 14, - .loop = true, - .frame_lengths = - { - gfxMillisecondsToTicks(1000), // fade in - gfxMillisecondsToTicks(1000), // no op (leds on) - gfxMillisecondsToTicks(1000), // fade out - gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade - gfxMillisecondsToTicks(GRADIENT_TIME), // left to rigt (outside in) - gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade - gfxMillisecondsToTicks(GRADIENT_TIME), // top_to_bottom - 0, // mirror leds - gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade - gfxMillisecondsToTicks(GRADIENT_TIME), // left_to_right (mirrored, so inside out) - gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade - gfxMillisecondsToTicks(GRADIENT_TIME), // top_to_bottom - 0, // normal leds - gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade - - }, - .frame_functions = - { - led_backlight_keyframe_fade_in_all, - keyframe_no_operation, - led_backlight_keyframe_fade_out_all, - led_backlight_keyframe_crossfade, - led_backlight_keyframe_left_to_right_gradient, - led_backlight_keyframe_crossfade, - led_backlight_keyframe_top_to_bottom_gradient, - led_backlight_keyframe_mirror_orientation, - led_backlight_keyframe_crossfade, - led_backlight_keyframe_left_to_right_gradient, - led_backlight_keyframe_crossfade, - led_backlight_keyframe_top_to_bottom_gradient, - led_backlight_keyframe_normal_orientation, - led_backlight_keyframe_crossfade, - }, -}; -# endif - -#endif diff --git a/quantum/visualizer/default_animations.h b/quantum/visualizer/default_animations.h deleted file mode 100644 index 9accd89774..0000000000 --- a/quantum/visualizer/default_animations.h +++ /dev/null @@ -1,27 +0,0 @@ -/* Copyright 2017 Fred Sundvik - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -#include "visualizer.h" - -// You can use these default animations, but of course you can also write your own custom ones instead -extern keyframe_animation_t default_startup_animation; -extern keyframe_animation_t default_suspend_animation; - -// An animation for testing and demonstrating the led support, should probably not be used for real world -// cases -extern keyframe_animation_t led_test_animation; diff --git a/quantum/visualizer/lcd_backlight.c b/quantum/visualizer/lcd_backlight.c deleted file mode 100644 index 23978974e3..0000000000 --- a/quantum/visualizer/lcd_backlight.c +++ /dev/null @@ -1,87 +0,0 @@ -/* -The MIT License (MIT) - -Copyright (c) 2016 Fred Sundvik - -Permission is hereby granted, free of charge, to any person obtaining a copy -of this software and associated documentation files (the "Software"), to deal -in the Software without restriction, including without limitation the rights -to use, copy, modify, merge, publish, distribute, sublicense, and/or sell -copies of the Software, and to permit persons to whom the Software is -furnished to do so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ - -#include "lcd_backlight.h" -#include - -static uint8_t current_hue = 0; -static uint8_t current_saturation = 0; -static uint8_t current_intensity = 0; -static uint8_t current_brightness = 0; - -void lcd_backlight_init(void) { - lcd_backlight_hal_init(); - lcd_backlight_color(current_hue, current_saturation, current_intensity); -} - -// This code is based on Brian Neltner's blogpost and example code -// "Why every LED light should be using HSI colorspace". -// http://blog.saikoled.com/post/43693602826/why-every-led-light-should-be-using-hsi -static void hsi_to_rgb(float h, float s, float i, uint16_t* r_out, uint16_t* g_out, uint16_t* b_out) { - unsigned int r, g, b; - h = fmodf(h, 360.0f); // cycle h around to 0-360 degrees - h = 3.14159f * h / 180.0f; // Convert to radians. - s = s > 0.0f ? (s < 1.0f ? s : 1.0f) : 0.0f; // clamp s and i to interval [0,1] - i = i > 0.0f ? (i < 1.0f ? i : 1.0f) : 0.0f; - - // Math! Thanks in part to Kyle Miller. - if (h < 2.09439f) { - r = 65535.0f * i / 3.0f * (1.0f + s * cos(h) / cosf(1.047196667f - h)); - g = 65535.0f * i / 3.0f * (1.0f + s * (1.0f - cosf(h) / cos(1.047196667f - h))); - b = 65535.0f * i / 3.0f * (1.0f - s); - } else if (h < 4.188787) { - h = h - 2.09439; - g = 65535.0f * i / 3.0f * (1.0f + s * cosf(h) / cosf(1.047196667f - h)); - b = 65535.0f * i / 3.0f * (1.0f + s * (1.0f - cosf(h) / cosf(1.047196667f - h))); - r = 65535.0f * i / 3.0f * (1.0f - s); - } else { - h = h - 4.188787; - b = 65535.0f * i / 3.0f * (1.0f + s * cosf(h) / cosf(1.047196667f - h)); - r = 65535.0f * i / 3.0f * (1.0f + s * (1.0f - cosf(h) / cosf(1.047196667f - h))); - g = 65535.0f * i / 3.0f * (1.0f - s); - } - *r_out = r > 65535 ? 65535 : r; - *g_out = g > 65535 ? 65535 : g; - *b_out = b > 65535 ? 65535 : b; -} - -void lcd_backlight_color(uint8_t hue, uint8_t saturation, uint8_t intensity) { - uint16_t r, g, b; - float hue_f = 360.0f * (float)hue / 255.0f; - float saturation_f = (float)saturation / 255.0f; - float intensity_f = (float)intensity / 255.0f; - intensity_f *= (float)current_brightness / 255.0f; - hsi_to_rgb(hue_f, saturation_f, intensity_f, &r, &g, &b); - current_hue = hue; - current_saturation = saturation; - current_intensity = intensity; - lcd_backlight_hal_color(r, g, b); -} - -void lcd_backlight_brightness(uint8_t b) { - current_brightness = b; - lcd_backlight_color(current_hue, current_saturation, current_intensity); -} - -uint8_t lcd_get_backlight_brightness(void) { return current_brightness; } diff --git a/quantum/visualizer/lcd_backlight.h b/quantum/visualizer/lcd_backlight.h deleted file mode 100644 index 4ea5b14639..0000000000 --- a/quantum/visualizer/lcd_backlight.h +++ /dev/null @@ -1,43 +0,0 @@ -/* -The MIT License (MIT) - -Copyright (c) 2016 Fred Sundvik - -Permission is hereby granted, free of charge, to any person obtaining a copy -of this software and associated documentation files (the "Software"), to deal -in the Software without restriction, including without limitation the rights -to use, copy, modify, merge, publish, distribute, sublicense, and/or sell -copies of the Software, and to permit persons to whom the Software is -furnished to do so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ - -#pragma once - -#include - -// Helper macros for storing hue, staturation and intensity as unsigned integers -#define LCD_COLOR(hue, saturation, intensity) (hue << 16 | saturation << 8 | intensity) -#define LCD_HUE(color) ((color >> 16) & 0xFF) -#define LCD_SAT(color) ((color >> 8) & 0xFF) -#define LCD_INT(color) (color & 0xFF) - -static inline uint32_t change_lcd_color_intensity(uint32_t color, uint8_t new_intensity) { return (color & 0xFFFFFF00) | new_intensity; } - -void lcd_backlight_init(void); -void lcd_backlight_color(uint8_t hue, uint8_t saturation, uint8_t intensity); -void lcd_backlight_brightness(uint8_t b); -uint8_t lcd_get_backlight_brightness(void); - -void lcd_backlight_hal_init(void); -void lcd_backlight_hal_color(uint16_t r, uint16_t g, uint16_t b); diff --git a/quantum/visualizer/lcd_backlight_keyframes.c b/quantum/visualizer/lcd_backlight_keyframes.c deleted file mode 100644 index c13cce311d..0000000000 --- a/quantum/visualizer/lcd_backlight_keyframes.c +++ /dev/null @@ -1,69 +0,0 @@ -/* Copyright 2017 Fred Sundvik - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include "lcd_backlight_keyframes.h" - -bool lcd_backlight_keyframe_animate_color(keyframe_animation_t* animation, visualizer_state_t* state) { - int frame_length = animation->frame_lengths[animation->current_frame]; - int current_pos = frame_length - animation->time_left_in_frame; - uint8_t t_h = LCD_HUE(state->target_lcd_color); - uint8_t t_s = LCD_SAT(state->target_lcd_color); - uint8_t t_i = LCD_INT(state->target_lcd_color); - uint8_t p_h = LCD_HUE(state->prev_lcd_color); - uint8_t p_s = LCD_SAT(state->prev_lcd_color); - uint8_t p_i = LCD_INT(state->prev_lcd_color); - - uint8_t d_h1 = t_h - p_h; // Modulo arithmetic since we want to wrap around - int d_h2 = t_h - p_h; - // Chose the shortest way around - int d_h = abs(d_h2) < d_h1 ? d_h2 : d_h1; - int d_s = t_s - p_s; - int d_i = t_i - p_i; - - int hue = (d_h * current_pos) / frame_length; - int sat = (d_s * current_pos) / frame_length; - int intensity = (d_i * current_pos) / frame_length; - // dprintf("%X -> %X = %X\n", p_h, t_h, hue); - hue += p_h; - sat += p_s; - intensity += p_i; - state->current_lcd_color = LCD_COLOR(hue, sat, intensity); - lcd_backlight_color(LCD_HUE(state->current_lcd_color), LCD_SAT(state->current_lcd_color), LCD_INT(state->current_lcd_color)); - - return true; -} - -bool lcd_backlight_keyframe_set_color(keyframe_animation_t* animation, visualizer_state_t* state) { - (void)animation; - state->prev_lcd_color = state->target_lcd_color; - state->current_lcd_color = state->target_lcd_color; - lcd_backlight_color(LCD_HUE(state->current_lcd_color), LCD_SAT(state->current_lcd_color), LCD_INT(state->current_lcd_color)); - return false; -} - -bool lcd_backlight_keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state) { - (void)animation; - (void)state; - lcd_backlight_hal_color(0, 0, 0); - return false; -} - -bool lcd_backlight_keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state) { - (void)animation; - (void)state; - lcd_backlight_color(LCD_HUE(state->current_lcd_color), LCD_SAT(state->current_lcd_color), LCD_INT(state->current_lcd_color)); - return false; -} diff --git a/quantum/visualizer/lcd_backlight_keyframes.h b/quantum/visualizer/lcd_backlight_keyframes.h deleted file mode 100644 index 88768dd4a5..0000000000 --- a/quantum/visualizer/lcd_backlight_keyframes.h +++ /dev/null @@ -1,27 +0,0 @@ -/* Copyright 2017 Fred Sundvik - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -#include "visualizer.h" - -// Animates the LCD backlight color between the current color and the target color (of the state) -bool lcd_backlight_keyframe_animate_color(keyframe_animation_t* animation, visualizer_state_t* state); -// Sets the backlight color to the target color -bool lcd_backlight_keyframe_set_color(keyframe_animation_t* animation, visualizer_state_t* state); - -bool lcd_backlight_keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state); -bool lcd_backlight_keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state); diff --git a/quantum/visualizer/lcd_keyframes.c b/quantum/visualizer/lcd_keyframes.c deleted file mode 100644 index 1d6f3dca18..0000000000 --- a/quantum/visualizer/lcd_keyframes.c +++ /dev/null @@ -1,184 +0,0 @@ -/* Copyright 2017 Fred Sundvik - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include "lcd_keyframes.h" -#include -#include "action_util.h" -#include "led.h" -#include "resources/resources.h" - -bool lcd_keyframe_display_layer_text(keyframe_animation_t* animation, visualizer_state_t* state) { - (void)animation; - gdispClear(White); - gdispDrawString(0, 10, state->layer_text, state->font_dejavusansbold12, Black); - return false; -} - -static void format_layer_bitmap_string(uint16_t default_layer, uint16_t layer, char* buffer) { - for (int i = 0; i < 16; i++) { - uint32_t mask = (1u << i); - if (default_layer & mask) { - if (layer & mask) { - *buffer = 'B'; - } else { - *buffer = 'D'; - } - } else if (layer & mask) { - *buffer = '1'; - } else { - *buffer = '0'; - } - ++buffer; - - if (i == 3 || i == 7 || i == 11) { - *buffer = ' '; - ++buffer; - } - } - *buffer = 0; -} - -bool lcd_keyframe_display_layer_bitmap(keyframe_animation_t* animation, visualizer_state_t* state) { - (void)animation; - const char* layer_help = "1=On D=Default B=Both"; - char layer_buffer[16 + 4]; // 3 spaces and one null terminator - gdispClear(White); - gdispDrawString(0, 0, layer_help, state->font_fixed5x8, Black); - format_layer_bitmap_string(state->status.default_layer, state->status.layer, layer_buffer); - gdispDrawString(0, 10, layer_buffer, state->font_fixed5x8, Black); - format_layer_bitmap_string(state->status.default_layer >> 16, state->status.layer >> 16, layer_buffer); - gdispDrawString(0, 20, layer_buffer, state->font_fixed5x8, Black); - return false; -} - -static void format_mods_bitmap_string(uint8_t mods, char* buffer) { - *buffer = ' '; - ++buffer; - - for (int i = 0; i < 8; i++) { - uint32_t mask = (1u << i); - if (mods & mask) { - *buffer = '1'; - } else { - *buffer = '0'; - } - ++buffer; - - if (i == 3) { - *buffer = ' '; - ++buffer; - } - } - *buffer = 0; -} - -bool lcd_keyframe_display_mods_bitmap(keyframe_animation_t* animation, visualizer_state_t* state) { - (void)animation; - - const char* title = "Modifier states"; - const char* mods_header = " CSAG CSAG "; - char status_buffer[12]; - - gdispClear(White); - gdispDrawString(0, 0, title, state->font_fixed5x8, Black); - gdispDrawString(0, 10, mods_header, state->font_fixed5x8, Black); - format_mods_bitmap_string(state->status.mods, status_buffer); - gdispDrawString(0, 20, status_buffer, state->font_fixed5x8, Black); - - return false; -} - -#define LED_STATE_STRING_SIZE sizeof("NUM CAPS SCRL COMP KANA") - -static void get_led_state_string(char* output, visualizer_state_t* state) { - uint8_t pos = 0; - - if (state->status.leds & (1u << USB_LED_NUM_LOCK)) { - memcpy(output + pos, "NUM ", 4); - pos += 4; - } - if (state->status.leds & (1u << USB_LED_CAPS_LOCK)) { - memcpy(output + pos, "CAPS ", 5); - pos += 5; - } - if (state->status.leds & (1u << USB_LED_SCROLL_LOCK)) { - memcpy(output + pos, "SCRL ", 5); - pos += 5; - } - if (state->status.leds & (1u << USB_LED_COMPOSE)) { - memcpy(output + pos, "COMP ", 5); - pos += 5; - } - if (state->status.leds & (1u << USB_LED_KANA)) { - memcpy(output + pos, "KANA", 4); - pos += 4; - } - output[pos] = 0; -} - -bool lcd_keyframe_display_led_states(keyframe_animation_t* animation, visualizer_state_t* state) { - (void)animation; - char output[LED_STATE_STRING_SIZE]; - get_led_state_string(output, state); - gdispClear(White); - gdispDrawString(0, 10, output, state->font_dejavusansbold12, Black); - return false; -} - -bool lcd_keyframe_display_layer_and_led_states(keyframe_animation_t* animation, visualizer_state_t* state) { - (void)animation; - gdispClear(White); - uint8_t y = 10; - if (state->status.leds) { - char output[LED_STATE_STRING_SIZE]; - get_led_state_string(output, state); - gdispDrawString(0, 1, output, state->font_dejavusansbold12, Black); - y = 17; - } - gdispDrawString(0, y, state->layer_text, state->font_dejavusansbold12, Black); - return false; -} - -bool lcd_keyframe_draw_logo(keyframe_animation_t* animation, visualizer_state_t* state) { - (void)state; - (void)animation; - // Read the uGFX documentation for information how to use the displays - // http://wiki.ugfx.org/index.php/Main_Page - gdispClear(Black); - - // You can use static variables for things that can't be found in the animation - // or state structs, here we use the image - - // gdispGBlitArea is a tricky function to use since it supports blitting part of the image - // if you have full screen image, then just use LCD_WIDTH and LCD_HEIGHT for both source and target dimensions - gdispGBlitArea(GDISP, 0, 0, 128, 32, 0, 0, LCD_WIDTH, (pixel_t*)resource_lcd_logo); - - return false; -} - -bool lcd_keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state) { - (void)animation; - (void)state; - gdispSetPowerMode(powerOff); - return false; -} - -bool lcd_keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state) { - (void)animation; - (void)state; - gdispSetPowerMode(powerOn); - return false; -} diff --git a/quantum/visualizer/lcd_keyframes.h b/quantum/visualizer/lcd_keyframes.h deleted file mode 100644 index b7125e8323..0000000000 --- a/quantum/visualizer/lcd_keyframes.h +++ /dev/null @@ -1,35 +0,0 @@ -/* Copyright 2017 Fred Sundvik - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -#include "visualizer.h" - -// Displays the layer text centered vertically on the screen -bool lcd_keyframe_display_layer_text(keyframe_animation_t* animation, visualizer_state_t* state); -// Displays a bitmap (0/1) of all the currently active layers -bool lcd_keyframe_display_layer_bitmap(keyframe_animation_t* animation, visualizer_state_t* state); -// Displays a bitmap (0/1) of all the currently active mods -bool lcd_keyframe_display_mods_bitmap(keyframe_animation_t* animation, visualizer_state_t* state); -// Displays the keyboard led states (CAPS (Caps lock), NUM (Num lock), SCRL (Scroll lock), COMP (Compose), KANA) -bool lcd_keyframe_display_led_states(keyframe_animation_t* animation, visualizer_state_t* state); -// Displays both the layer text and the led states -bool lcd_keyframe_display_layer_and_led_states(keyframe_animation_t* animation, visualizer_state_t* state); -// Displays the QMK logo on the LCD screen -bool lcd_keyframe_draw_logo(keyframe_animation_t* animation, visualizer_state_t* state); - -bool lcd_keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state); -bool lcd_keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state); diff --git a/quantum/visualizer/led_backlight_keyframes.c b/quantum/visualizer/led_backlight_keyframes.c deleted file mode 100644 index 338ada5227..0000000000 --- a/quantum/visualizer/led_backlight_keyframes.c +++ /dev/null @@ -1,143 +0,0 @@ -/* -The MIT License (MIT) - -Copyright (c) 2016 Fred Sundvik - -Permission is hereby granted, free of charge, to any person obtaining a copy -of this software and associated documentation files (the "Software"), to deal -in the Software without restriction, including without limitation the rights -to use, copy, modify, merge, publish, distribute, sublicense, and/or sell -copies of the Software, and to permit persons to whom the Software is -furnished to do so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ -#include "gfx.h" -#include -#include "led_backlight_keyframes.h" - -static uint8_t fade_led_color(keyframe_animation_t* animation, int from, int to) { - int frame_length = animation->frame_lengths[animation->current_frame]; - int current_pos = frame_length - animation->time_left_in_frame; - int delta = to - from; - int luma = (delta * current_pos) / frame_length; - luma += from; - return luma; -} - -static void keyframe_fade_all_leds_from_to(keyframe_animation_t* animation, uint8_t from, uint8_t to) { - uint8_t luma = fade_led_color(animation, from, to); - color_t color = LUMA2COLOR(luma); - gdispGClear(LED_DISPLAY, color); -} - -// TODO: Should be customizable per keyboard -#define NUM_ROWS LED_HEIGHT -#define NUM_COLS LED_WIDTH - -static uint8_t crossfade_start_frame[NUM_ROWS][NUM_COLS]; -static uint8_t crossfade_end_frame[NUM_ROWS][NUM_COLS]; - -static uint8_t compute_gradient_color(float t, float index, float num) { - const float two_pi = M_PI * 2.0f; - float normalized_index = (1.0f - index / (num - 1.0f)) * two_pi; - float x = t * two_pi + normalized_index; - float v = 0.5 * (cosf(x) + 1.0f); - return (uint8_t)(255.0f * v); -} - -bool led_backlight_keyframe_fade_in_all(keyframe_animation_t* animation, visualizer_state_t* state) { - (void)state; - keyframe_fade_all_leds_from_to(animation, 0, 255); - return true; -} - -bool led_backlight_keyframe_fade_out_all(keyframe_animation_t* animation, visualizer_state_t* state) { - (void)state; - keyframe_fade_all_leds_from_to(animation, 255, 0); - return true; -} - -bool led_backlight_keyframe_left_to_right_gradient(keyframe_animation_t* animation, visualizer_state_t* state) { - (void)state; - float frame_length = animation->frame_lengths[animation->current_frame]; - float current_pos = frame_length - animation->time_left_in_frame; - float t = current_pos / frame_length; - for (int i = 0; i < NUM_COLS; i++) { - uint8_t color = compute_gradient_color(t, i, NUM_COLS); - gdispGDrawLine(LED_DISPLAY, i, 0, i, NUM_ROWS - 1, LUMA2COLOR(color)); - } - return true; -} - -bool led_backlight_keyframe_top_to_bottom_gradient(keyframe_animation_t* animation, visualizer_state_t* state) { - (void)state; - float frame_length = animation->frame_lengths[animation->current_frame]; - float current_pos = frame_length - animation->time_left_in_frame; - float t = current_pos / frame_length; - for (int i = 0; i < NUM_ROWS; i++) { - uint8_t color = compute_gradient_color(t, i, NUM_ROWS); - gdispGDrawLine(LED_DISPLAY, 0, i, NUM_COLS - 1, i, LUMA2COLOR(color)); - } - return true; -} - -static void copy_current_led_state(uint8_t* dest) { - for (int i = 0; i < NUM_ROWS; i++) { - for (int j = 0; j < NUM_COLS; j++) { - dest[i * NUM_COLS + j] = gdispGGetPixelColor(LED_DISPLAY, j, i); - } - } -} -bool led_backlight_keyframe_crossfade(keyframe_animation_t* animation, visualizer_state_t* state) { - (void)state; - if (animation->first_update_of_frame) { - copy_current_led_state(&crossfade_start_frame[0][0]); - run_next_keyframe(animation, state); - copy_current_led_state(&crossfade_end_frame[0][0]); - } - for (int i = 0; i < NUM_ROWS; i++) { - for (int j = 0; j < NUM_COLS; j++) { - color_t color = LUMA2COLOR(fade_led_color(animation, crossfade_start_frame[i][j], crossfade_end_frame[i][j])); - gdispGDrawPixel(LED_DISPLAY, j, i, color); - } - } - return true; -} - -bool led_backlight_keyframe_mirror_orientation(keyframe_animation_t* animation, visualizer_state_t* state) { - (void)state; - (void)animation; - gdispGSetOrientation(LED_DISPLAY, GDISP_ROTATE_180); - return false; -} - -bool led_backlight_keyframe_normal_orientation(keyframe_animation_t* animation, visualizer_state_t* state) { - (void)state; - (void)animation; - gdispGSetOrientation(LED_DISPLAY, GDISP_ROTATE_0); - return false; -} - -bool led_backlight_keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state) { - (void)state; - (void)animation; - gdispGSetPowerMode(LED_DISPLAY, powerOff); - return false; -} - -bool led_backlight_keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state) { - (void)state; - (void)animation; - gdispGSetPowerMode(LED_DISPLAY, powerOn); - return false; -} diff --git a/quantum/visualizer/led_backlight_keyframes.h b/quantum/visualizer/led_backlight_keyframes.h deleted file mode 100644 index 90153be5eb..0000000000 --- a/quantum/visualizer/led_backlight_keyframes.h +++ /dev/null @@ -1,40 +0,0 @@ -/* -The MIT License (MIT) - -Copyright (c) 2016 Fred Sundvik - -Permission is hereby granted, free of charge, to any person obtaining a copy -of this software and associated documentation files (the "Software"), to deal -in the Software without restriction, including without limitation the rights -to use, copy, modify, merge, publish, distribute, sublicense, and/or sell -copies of the Software, and to permit persons to whom the Software is -furnished to do so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ - -#pragma once - -#include "visualizer.h" - -bool led_backlight_keyframe_fade_in_all(keyframe_animation_t* animation, visualizer_state_t* state); -bool led_backlight_keyframe_fade_out_all(keyframe_animation_t* animation, visualizer_state_t* state); -bool led_backlight_keyframe_left_to_right_gradient(keyframe_animation_t* animation, visualizer_state_t* state); -bool led_backlight_keyframe_top_to_bottom_gradient(keyframe_animation_t* animation, visualizer_state_t* state); -bool led_backlight_keyframe_crossfade(keyframe_animation_t* animation, visualizer_state_t* state); -bool led_backlight_keyframe_mirror_orientation(keyframe_animation_t* animation, visualizer_state_t* state); -bool led_backlight_keyframe_normal_orientation(keyframe_animation_t* animation, visualizer_state_t* state); - -bool led_backlight_keyframe_disable(keyframe_animation_t* animation, visualizer_state_t* state); -bool led_backlight_keyframe_enable(keyframe_animation_t* animation, visualizer_state_t* state); - -extern keyframe_animation_t led_test_animation; diff --git a/quantum/visualizer/readme.md b/quantum/visualizer/readme.md deleted file mode 100644 index 298efb742f..0000000000 --- a/quantum/visualizer/readme.md +++ /dev/null @@ -1,18 +0,0 @@ -# A visualization library for the TMK keyboard firmware - -This library is designed to work together with the [TMK keyboard firmware](https://github.com/tmk/tmk_keyboard). Currently it only works for [Chibios](http://www.chibios.org/) - flavors, but it would be possible to add support for other configurations as well. The LCD display functionality is provided by the [uGFX library](https://ugfx.io/). - -## To use this library as a user -You can and should modify the visualizer\_user.c file. Check the comments in the file for more information. - -## To add this library to custom keyboard projects - -1. Add tmk_visualizer as a submodule to your project -1. Set VISUALIZER_DIR in the main keyboard project makefile to point to the submodule -1. Define LCD\_ENABLE and/or LCD\_BACKLIGHT\_ENABLE, to enable support -1. Include the visualizer.mk make file -1. Copy the files in the example\_integration folder to your keyboard project -1. All other files than the callback.c file are included automatically, so you will need to add callback.c to your makefile manually. If you already have a similar file in your project, you can just copy the functions instead of the whole file. -1. Edit the files to match your hardware. You might might want to read the Chibios and UGfx documentation, for more information. -1. If you enable LCD support you might also have to write a custom uGFX display driver, check the uGFX documentation for that. You probably also want to enable SPI support in your Chibios configuration. diff --git a/quantum/visualizer/resources/lcd_logo.c b/quantum/visualizer/resources/lcd_logo.c deleted file mode 100644 index 13bf734cb3..0000000000 --- a/quantum/visualizer/resources/lcd_logo.c +++ /dev/null @@ -1,45 +0,0 @@ -/* Copyright 2017 Fred Sundvik - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include "resources.h" - -// clang-format off - -// To generate an image array like this -// Ensure the image is 128 x 32 or smaller -// Convert the bitmap to a C array using a program like http://www.riuson.com/lcd-image-converter/ -// Ensure the the conversion process produces a monochrome format array - 1 bit/pixel, left to right, top to bottom -// Update array in the source code with the C array produced by the conversion program - -// The image below is generated from lcd_logo.png -__attribute__((weak)) const uint8_t resource_lcd_logo[512] = { - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x02, 0x92, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x92, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x02, 0x92, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0F, 0xFF, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x1F, 0xFF, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0xFF, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0xFE, 0xEE, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1E, 0xEE, 0xF0, 0x01, 0xC6, 0x0D, 0x8C, 0x1F, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0xFE, 0xEE, 0xFE, 0x03, 0xE7, 0x1D, 0x9C, 0x1F, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1E, 0xEE, 0xF0, 0x06, 0x37, 0x1D, 0xB8, 0x18, 0x0B, 0x59, 0xC8, 0x09, 0xE5, 0x9E, 0x00, - 0x00, 0x1E, 0xEE, 0xF0, 0x06, 0x37, 0xBD, 0xF0, 0x18, 0x6F, 0x7F, 0xEC, 0x9B, 0x37, 0xB3, 0x00, 0x00, 0xFE, 0xEE, 0xFE, 0x06, 0x37, 0xBD, 0xE0, 0x1F, 0x6C, 0x66, 0x6D, 0xD8, 0x36, 0x33, 0x00, - 0x00, 0x1E, 0xEE, 0xF0, 0x06, 0x36, 0xED, 0xF0, 0x1F, 0x6C, 0x66, 0x6D, 0x59, 0xF6, 0x3E, 0x00, 0x00, 0x1F, 0x6D, 0xF0, 0x06, 0x36, 0xED, 0xB8, 0x18, 0x6C, 0x66, 0x67, 0x73, 0x36, 0x30, 0x00, - 0x00, 0xFF, 0x83, 0xFE, 0x03, 0xE6, 0x4D, 0x9C, 0x18, 0x6C, 0x66, 0x67, 0x73, 0x36, 0x1F, 0x00, 0x00, 0x1F, 0xEF, 0xF0, 0x01, 0xC6, 0x0D, 0x8C, 0x18, 0x6C, 0x66, 0x62, 0x21, 0xD6, 0x0E, 0x00, - 0x00, 0xFF, 0xEF, 0xFE, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0xFF, 0xF0, 0x00, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x1F, 0xFF, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0F, 0xFF, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x02, 0x92, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x92, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x02, 0x92, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 -}; diff --git a/quantum/visualizer/resources/lcd_logo.png b/quantum/visualizer/resources/lcd_logo.png deleted file mode 100644 index 178ef65f15703e9e1a75b05522a2caca3a5b31a2..0000000000000000000000000000000000000000 GIT binary patch literal 0 HcmV?d00001 literal 271 zcmeAS@N?(olHy`uVBq!ia0vp^4M42G!VDxecyh&n6kC8#h%1o(|NsBeoAd7iSw}ow z978;gzn$`suUUbor8@sY_5bN#qY@4o^*-oN?N$}i{!p3ASp6pT-G$Gm8N{O17BKzL zb?7+1O@>8kK^0r$ioTV6cFP@V4Yu%!GcIoWQOL@oA8tKyN6qy&U;cPt6^6+XIUfy%rV9i-. - */ - -#pragma once - -#include - -#ifdef LCD_ENABLE -extern const uint8_t resource_lcd_logo[]; -#endif diff --git a/quantum/visualizer/visualizer.c b/quantum/visualizer/visualizer.c deleted file mode 100644 index 709affbb77..0000000000 --- a/quantum/visualizer/visualizer.c +++ /dev/null @@ -1,483 +0,0 @@ -/* -The MIT License (MIT) - -Copyright (c) 2016 Fred Sundvik - -Permission is hereby granted, free of charge, to any person obtaining a copy -of this software and associated documentation files (the "Software"), to deal -in the Software without restriction, including without limitation the rights -to use, copy, modify, merge, publish, distribute, sublicense, and/or sell -copies of the Software, and to permit persons to whom the Software is -furnished to do so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ - -#include "config.h" -#include "visualizer.h" -#include -#ifdef PROTOCOL_CHIBIOS -# include -#endif - -#include "gfx.h" - -#ifdef LCD_BACKLIGHT_ENABLE -# include "lcd_backlight.h" -#endif - -//#define DEBUG_VISUALIZER - -#ifdef DEBUG_VISUALIZER -# include "debug.h" -#else -# include "nodebug.h" -#endif - -#ifdef SERIAL_LINK_ENABLE -# include "serial_link/protocol/transport.h" -# include "serial_link/system/serial_link.h" -#endif - -#include "action_util.h" - -// Define this in config.h -#ifndef VISUALIZER_THREAD_PRIORITY -// The visualizer needs gfx thread priorities -# define VISUALIZER_THREAD_PRIORITY (NORMAL_PRIORITY - 2) -#endif - -static visualizer_keyboard_status_t current_status = {.layer = 0xFFFFFFFF, - .default_layer = 0xFFFFFFFF, - .leds = 0xFFFFFFFF, -#ifdef BACKLIGHT_ENABLE - .backlight_level = 0, -#endif - .mods = 0xFF, - .suspended = false, -#ifdef VISUALIZER_USER_DATA_SIZE - .user_data = {0} -#endif -}; - -static bool same_status(visualizer_keyboard_status_t* status1, visualizer_keyboard_status_t* status2) { - return status1->layer == status2->layer && status1->default_layer == status2->default_layer && status1->mods == status2->mods && status1->leds == status2->leds && status1->suspended == status2->suspended -#ifdef BACKLIGHT_ENABLE - && status1->backlight_level == status2->backlight_level -#endif -#ifdef VISUALIZER_USER_DATA_SIZE - && memcmp(status1->user_data, status2->user_data, VISUALIZER_USER_DATA_SIZE) == 0 -#endif - ; -} - -static bool visualizer_enabled = false; - -#ifdef VISUALIZER_USER_DATA_SIZE -static uint8_t user_data[VISUALIZER_USER_DATA_SIZE]; -#endif - -#define MAX_SIMULTANEOUS_ANIMATIONS 4 -static keyframe_animation_t* animations[MAX_SIMULTANEOUS_ANIMATIONS] = {}; - -#ifdef SERIAL_LINK_ENABLE -MASTER_TO_ALL_SLAVES_OBJECT(current_status, visualizer_keyboard_status_t); - -static remote_object_t* remote_objects[] = { - REMOTE_OBJECT(current_status), -}; - -#endif - -GDisplay* LCD_DISPLAY = 0; -GDisplay* LED_DISPLAY = 0; - -#ifdef LCD_DISPLAY_NUMBER -__attribute__((weak)) GDisplay* get_lcd_display(void) { return gdispGetDisplay(LCD_DISPLAY_NUMBER); } -#endif - -#ifdef LED_DISPLAY_NUMBER -__attribute__((weak)) GDisplay* get_led_display(void) { return gdispGetDisplay(LED_DISPLAY_NUMBER); } -#endif - -void start_keyframe_animation(keyframe_animation_t* animation) { - animation->current_frame = -1; - animation->time_left_in_frame = 0; - animation->need_update = true; - int free_index = -1; - for (int i = 0; i < MAX_SIMULTANEOUS_ANIMATIONS; i++) { - if (animations[i] == animation) { - return; - } - if (free_index == -1 && animations[i] == NULL) { - free_index = i; - } - } - if (free_index != -1) { - animations[free_index] = animation; - } -} - -void stop_keyframe_animation(keyframe_animation_t* animation) { - animation->current_frame = animation->num_frames; - animation->time_left_in_frame = 0; - animation->need_update = true; - animation->first_update_of_frame = false; - animation->last_update_of_frame = false; - for (int i = 0; i < MAX_SIMULTANEOUS_ANIMATIONS; i++) { - if (animations[i] == animation) { - animations[i] = NULL; - return; - } - } -} - -void stop_all_keyframe_animations(void) { - for (int i = 0; i < MAX_SIMULTANEOUS_ANIMATIONS; i++) { - if (animations[i]) { - animations[i]->current_frame = animations[i]->num_frames; - animations[i]->time_left_in_frame = 0; - animations[i]->need_update = true; - animations[i]->first_update_of_frame = false; - animations[i]->last_update_of_frame = false; - animations[i] = NULL; - } - } -} - -static uint8_t get_num_running_animations(void) { - uint8_t count = 0; - for (int i = 0; i < MAX_SIMULTANEOUS_ANIMATIONS; i++) { - count += animations[i] ? 1 : 0; - } - return count; -} - -static bool update_keyframe_animation(keyframe_animation_t* animation, visualizer_state_t* state, systemticks_t delta, systemticks_t* sleep_time) { - // TODO: Clean up this messy code - dprintf("Animation frame%d, left %d, delta %d\n", animation->current_frame, animation->time_left_in_frame, delta); - if (animation->current_frame == animation->num_frames) { - animation->need_update = false; - return false; - } - if (animation->current_frame == -1) { - animation->current_frame = 0; - animation->time_left_in_frame = animation->frame_lengths[0]; - animation->need_update = true; - animation->first_update_of_frame = true; - } else { - animation->time_left_in_frame -= delta; - while (animation->time_left_in_frame <= 0) { - int left = animation->time_left_in_frame; - if (animation->need_update) { - animation->time_left_in_frame = 0; - animation->last_update_of_frame = true; - (*animation->frame_functions[animation->current_frame])(animation, state); - animation->last_update_of_frame = false; - } - animation->current_frame++; - animation->need_update = true; - animation->first_update_of_frame = true; - if (animation->current_frame == animation->num_frames) { - if (animation->loop) { - animation->current_frame = 0; - } else { - stop_keyframe_animation(animation); - return false; - } - } - delta = -left; - animation->time_left_in_frame = animation->frame_lengths[animation->current_frame]; - animation->time_left_in_frame -= delta; - } - } - if (animation->need_update) { - animation->need_update = (*animation->frame_functions[animation->current_frame])(animation, state); - animation->first_update_of_frame = false; - } - - systemticks_t wanted_sleep = animation->need_update ? gfxMillisecondsToTicks(10) : (unsigned)animation->time_left_in_frame; - if (wanted_sleep < *sleep_time) { - *sleep_time = wanted_sleep; - } - - return true; -} - -void run_next_keyframe(keyframe_animation_t* animation, visualizer_state_t* state) { - int next_frame = animation->current_frame + 1; - if (next_frame == animation->num_frames) { - next_frame = 0; - } - keyframe_animation_t temp_animation = *animation; - temp_animation.current_frame = next_frame; - temp_animation.time_left_in_frame = animation->frame_lengths[next_frame]; - temp_animation.first_update_of_frame = true; - temp_animation.last_update_of_frame = false; - temp_animation.need_update = false; - visualizer_state_t temp_state = *state; - (*temp_animation.frame_functions[next_frame])(&temp_animation, &temp_state); -} - -// TODO: Optimize the stack size, this is probably way too big -static DECLARE_THREAD_STACK(visualizerThreadStack, 1024); -static DECLARE_THREAD_FUNCTION(visualizerThread, arg) { - (void)arg; - - GListener event_listener; - geventListenerInit(&event_listener); - geventAttachSource(&event_listener, (GSourceHandle)¤t_status, 0); - - visualizer_keyboard_status_t initial_status = { - .default_layer = 0xFFFFFFFF, - .layer = 0xFFFFFFFF, - .mods = 0xFF, - .leds = 0xFFFFFFFF, - .suspended = false, -#ifdef BACKLIGHT_ENABLE - .backlight_level = 0, -#endif -#ifdef VISUALIZER_USER_DATA_SIZE - .user_data = {0}, -#endif - }; - - visualizer_state_t state = {.status = initial_status, - .current_lcd_color = 0, -#ifdef LCD_ENABLE - .font_fixed5x8 = gdispOpenFont("fixed_5x8"), - .font_dejavusansbold12 = gdispOpenFont("DejaVuSansBold12") -#endif - }; - initialize_user_visualizer(&state); - state.prev_lcd_color = state.current_lcd_color; - -#ifdef LCD_BACKLIGHT_ENABLE - lcd_backlight_color(LCD_HUE(state.current_lcd_color), LCD_SAT(state.current_lcd_color), LCD_INT(state.current_lcd_color)); -#endif - - systemticks_t sleep_time = TIME_INFINITE; - systemticks_t current_time = gfxSystemTicks(); - bool force_update = true; - - while (true) { - systemticks_t new_time = gfxSystemTicks(); - systemticks_t delta = new_time - current_time; - current_time = new_time; - bool enabled = visualizer_enabled; - if (force_update || !same_status(&state.status, ¤t_status)) { - force_update = false; -#if BACKLIGHT_ENABLE - if (current_status.backlight_level != state.status.backlight_level) { - if (current_status.backlight_level != 0) { - gdispGSetPowerMode(LED_DISPLAY, powerOn); - uint16_t percent = (uint16_t)current_status.backlight_level * 100 / BACKLIGHT_LEVELS; - gdispGSetBacklight(LED_DISPLAY, percent); - } else { - gdispGSetPowerMode(LED_DISPLAY, powerOff); - } - state.status.backlight_level = current_status.backlight_level; - } -#endif - if (visualizer_enabled) { - if (current_status.suspended) { - stop_all_keyframe_animations(); - visualizer_enabled = false; - state.status = current_status; - user_visualizer_suspend(&state); - } else { - visualizer_keyboard_status_t prev_status = state.status; - state.status = current_status; - update_user_visualizer_state(&state, &prev_status); - } - state.prev_lcd_color = state.current_lcd_color; - } - } - if (!enabled && state.status.suspended && current_status.suspended == false) { - // Setting the status to the initial status will force an update - // when the visualizer is enabled again - state.status = initial_status; - state.status.suspended = false; - stop_all_keyframe_animations(); - user_visualizer_resume(&state); - state.prev_lcd_color = state.current_lcd_color; - } - sleep_time = TIME_INFINITE; - for (int i = 0; i < MAX_SIMULTANEOUS_ANIMATIONS; i++) { - if (animations[i]) { - update_keyframe_animation(animations[i], &state, delta, &sleep_time); - } - } -#ifdef BACKLIGHT_ENABLE - gdispGFlush(LED_DISPLAY); -#endif - -#ifdef LCD_ENABLE - gdispGFlush(LCD_DISPLAY); -#endif - -#ifdef EMULATOR - draw_emulator(); -#endif - // Enable the visualizer when the startup or the suspend animation has finished - if (!visualizer_enabled && state.status.suspended == false && get_num_running_animations() == 0) { - visualizer_enabled = true; - force_update = true; - sleep_time = 0; - } - - systemticks_t after_update = gfxSystemTicks(); - unsigned update_delta = after_update - current_time; - if (sleep_time != TIME_INFINITE) { - if (sleep_time > update_delta) { - sleep_time -= update_delta; - } else { - sleep_time = 0; - } - } - dprintf("Update took %d, last delta %d, sleep_time %d\n", update_delta, delta, sleep_time); -#ifdef PROTOCOL_CHIBIOS - // The gEventWait function really takes milliseconds, even if the documentation says ticks. - // Unfortunately there's no generic ugfx conversion from system time to milliseconds, - // so let's do it in a platform dependent way. - - // On windows the system ticks is the same as milliseconds anyway - if (sleep_time != TIME_INFINITE) { - sleep_time = TIME_I2MS(sleep_time); - } -#endif - geventEventWait(&event_listener, sleep_time); - } -#ifdef LCD_ENABLE - gdispCloseFont(state.font_fixed5x8); - gdispCloseFont(state.font_dejavusansbold12); -#endif - - return 0; -} - -void visualizer_init(void) { - gfxInit(); - -#ifdef LCD_BACKLIGHT_ENABLE - lcd_backlight_init(); -#endif - -#ifdef SERIAL_LINK_ENABLE - add_remote_objects(remote_objects, sizeof(remote_objects) / sizeof(remote_object_t*)); -#endif - -#ifdef LCD_ENABLE - LCD_DISPLAY = get_lcd_display(); -#endif - -#ifdef BACKLIGHT_ENABLE - LED_DISPLAY = get_led_display(); -#endif - - // We are using a low priority thread, the idea is to have it run only - // when the main thread is sleeping during the matrix scanning - gfxThreadCreate(visualizerThreadStack, sizeof(visualizerThreadStack), VISUALIZER_THREAD_PRIORITY, visualizerThread, NULL); -} - -void update_status(bool changed) { - if (changed) { - GSourceListener* listener = geventGetSourceListener((GSourceHandle)¤t_status, NULL); - if (listener) { - geventSendEvent(listener); - } - } -#ifdef SERIAL_LINK_ENABLE - static systime_t last_update = 0; - systime_t current_update = chVTGetSystemTimeX(); - systime_t delta = current_update - last_update; - if (changed || delta > TIME_MS2I(10)) { - last_update = current_update; - visualizer_keyboard_status_t* r = begin_write_current_status(); - *r = current_status; - end_write_current_status(); - } -#endif -} - -uint8_t visualizer_get_mods() { - uint8_t mods = get_mods(); - -#ifndef NO_ACTION_ONESHOT - if (!has_oneshot_mods_timed_out()) { - mods |= get_oneshot_mods(); - } -#endif - return mods; -} - -#ifdef VISUALIZER_USER_DATA_SIZE -void visualizer_set_user_data(void* u) { memcpy(user_data, u, VISUALIZER_USER_DATA_SIZE); } -#endif - -void visualizer_update(layer_state_t default_state, layer_state_t state, uint8_t mods, uint32_t leds) { - // Note that there's a small race condition here, the thread could read - // a state where one of these are set but not the other. But this should - // not really matter as it will be fixed during the next loop step. - // Alternatively a mutex could be used instead of the volatile variables - - bool changed = false; -#ifdef SERIAL_LINK_ENABLE - if (is_serial_link_connected()) { - visualizer_keyboard_status_t* new_status = read_current_status(); - if (new_status) { - if (!same_status(¤t_status, new_status)) { - changed = true; - current_status = *new_status; - } - } - } else { -#else - { -#endif - visualizer_keyboard_status_t new_status = { - .layer = state, - .default_layer = default_state, - .mods = mods, - .leds = leds, -#ifdef BACKLIGHT_ENABLE - .backlight_level = current_status.backlight_level, -#endif - .suspended = current_status.suspended, - }; -#ifdef VISUALIZER_USER_DATA_SIZE - memcpy(new_status.user_data, user_data, VISUALIZER_USER_DATA_SIZE); -#endif - if (!same_status(¤t_status, &new_status)) { - changed = true; - current_status = new_status; - } - } - update_status(changed); -} - -void visualizer_suspend(void) { - current_status.suspended = true; - update_status(true); -} - -void visualizer_resume(void) { - current_status.suspended = false; - update_status(true); -} - -#ifdef BACKLIGHT_ENABLE -void backlight_set(uint8_t level) { - current_status.backlight_level = level; - update_status(true); -} -#endif diff --git a/quantum/visualizer/visualizer.h b/quantum/visualizer/visualizer.h deleted file mode 100644 index 627c80a305..0000000000 --- a/quantum/visualizer/visualizer.h +++ /dev/null @@ -1,154 +0,0 @@ -/* -The MIT License (MIT) - -Copyright (c) 2016 Fred Sundvik - -Permission is hereby granted, free of charge, to any person obtaining a copy -of this software and associated documentation files (the "Software"), to deal -in the Software without restriction, including without limitation the rights -to use, copy, modify, merge, publish, distribute, sublicense, and/or sell -copies of the Software, and to permit persons to whom the Software is -furnished to do so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ - -#pragma once - -#include -#include -#include - -#include "config.h" -#include "gfx.h" -#include "action_layer.h" - -#ifdef LCD_BACKLIGHT_ENABLE -# include "lcd_backlight.h" -#endif - -#ifdef BACKLIGHT_ENABLE -# include "backlight.h" -#endif - -// use this function to merge both real_mods and oneshot_mods in a uint16_t -uint8_t visualizer_get_mods(void); - -// This need to be called once at the start -void visualizer_init(void); -// This should be called at every matrix scan -void visualizer_update(layer_state_t default_state, layer_state_t state, uint8_t mods, uint32_t leds); - -// This should be called when the keyboard goes to suspend state -void visualizer_suspend(void); -// This should be called when the keyboard wakes up from suspend state -void visualizer_resume(void); - -// These functions are week, so they can be overridden by the keyboard -// if needed -GDisplay* get_lcd_display(void); -GDisplay* get_led_display(void); - -// For emulator builds, this function need to be implemented -#ifdef EMULATOR -void draw_emulator(void); -#endif - -// If you need support for more than 16 keyframes per animation, you can change this -#define MAX_VISUALIZER_KEY_FRAMES 16 - -struct keyframe_animation_t; - -typedef struct { - layer_state_t layer; - layer_state_t default_layer; - uint32_t leds; // See led.h for available statuses - uint8_t mods; - bool suspended; -#ifdef BACKLIGHT_ENABLE - uint8_t backlight_level; -#endif -#ifdef VISUALIZER_USER_DATA_SIZE - uint8_t user_data[VISUALIZER_USER_DATA_SIZE]; -#endif -} visualizer_keyboard_status_t; - -// The state struct is used by the various keyframe functions -// It's also used for setting the LCD color and layer text -// from the user customized code -typedef struct visualizer_state_t { - // The user code should primarily be modifying these - uint32_t target_lcd_color; - const char* layer_text; - - // The user visualizer(and animation functions) can read these - visualizer_keyboard_status_t status; - - // These are used by the animation functions - uint32_t current_lcd_color; - uint32_t prev_lcd_color; -#ifdef LCD_ENABLE - gFont font_fixed5x8; - gFont font_dejavusansbold12; -#endif -} visualizer_state_t; - -// Any custom keyframe function should have this signature -// return true to get continuous updates, otherwise you will only get one -// update per frame -typedef bool (*frame_func)(struct keyframe_animation_t*, visualizer_state_t*); - -// Represents a keyframe animation, so fields are internal to the system -// while others are meant to be initialized by the user code -typedef struct keyframe_animation_t { - // These should be initialized - int num_frames; - bool loop; - int frame_lengths[MAX_VISUALIZER_KEY_FRAMES]; - frame_func frame_functions[MAX_VISUALIZER_KEY_FRAMES]; - - // Used internally by the system, and can also be read by - // keyframe update functions - int current_frame; - int time_left_in_frame; - bool first_update_of_frame; - bool last_update_of_frame; - bool need_update; - -} keyframe_animation_t; - -extern GDisplay* LCD_DISPLAY; -extern GDisplay* LED_DISPLAY; - -void start_keyframe_animation(keyframe_animation_t* animation); -void stop_keyframe_animation(keyframe_animation_t* animation); -// This runs the next keyframe, but does not update the animation state -// Useful for crossfades for example -void run_next_keyframe(keyframe_animation_t* animation, visualizer_state_t* state); - -// The master can set userdata which will be transferred to the slave -#ifdef VISUALIZER_USER_DATA_SIZE -void visualizer_set_user_data(void* user_data); -#endif - -// These functions have to be implemented by the user -// Called regularly each time the state has changed (but not every scan loop) -void update_user_visualizer_state(visualizer_state_t* state, visualizer_keyboard_status_t* prev_status); -// Called when the computer goes to suspend, will also stop calling update_user_visualizer_state -void user_visualizer_suspend(visualizer_state_t* state); -// You have to start at least one animation as a response to the following two functions -// When the animation has finished the visualizer will resume normal operation and start calling the -// update_user_visualizer_state again -// Called when the keyboard boots up -void initialize_user_visualizer(visualizer_state_t* state); -// Called when the computer resumes from a suspend -void user_visualizer_resume(visualizer_state_t* state); diff --git a/quantum/visualizer/visualizer.mk b/quantum/visualizer/visualizer.mk deleted file mode 100644 index 4c961ac59d..0000000000 --- a/quantum/visualizer/visualizer.mk +++ /dev/null @@ -1,123 +0,0 @@ -# The MIT License (MIT) -# -# Copyright (c) 2016 Fred Sundvik -# -# Permission is hereby granted, free of charge, to any person obtaining a copy -# of this software and associated documentation files (the "Software"), to deal -# in the Software without restriction, including without limitation the rights -# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell -# copies of the Software, and to permit persons to whom the Software is -# furnished to do so, subject to the following conditions: -# -# The above copyright notice and this permission notice shall be included in all -# copies or substantial portions of the Software. -# -# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -# SOFTWARE. - -define ADD_DRIVER - $(1)_DRIVER:=$(strip $($(1)_DRIVER)) - $(1)_WIDTH:=$(strip $($(1)_WIDTH)) - $(1)_HEIGHT:=$(strip $($(1)_HEIGHT)) - ifeq ($($(1)_DRIVER),) - $$(error $(1)_DRIVER is not defined) - endif - ifeq ($($(1)_WIDTH),) - $$(error $(1)_WIDTH is not defined) - endif - ifeq ($($(1)_HEIGHT),) - $$(error $(1)_HEIGHT is not defined) - endif - OPT_DEFS+=-D$(1)_WIDTH=$($(1)_WIDTH) - OPT_DEFS+=-D$(1)_HEIGHT=$($(1)_HEIGHT) - GFXDEFS+=-D$(1)_WIDTH=$($(1)_WIDTH) - GFXDEFS+=-D$(1)_HEIGHT=$($(1)_HEIGHT) - $(1)_DISPLAY_NUMBER:=$$(words $$(GDISP_DRIVER_LIST)) - OPT_DEFS+=-D$(1)_DISPLAY_NUMBER=$$($(1)_DISPLAY_NUMBER) - include $(TOP_DIR)/drivers/ugfx/gdisp/$($(1)_DRIVER)/driver.mk -endef - -GDISP_DRIVER_LIST:= - -SRC += $(VISUALIZER_DIR)/visualizer.c \ - $(VISUALIZER_DIR)/visualizer_keyframes.c -EXTRAINCDIRS += $(GFXINC) $(VISUALIZER_DIR) -GFXLIB = $(LIB_PATH)/ugfx -VPATH += $(VISUALIZER_PATH) - -OPT_DEFS += -DVISUALIZER_ENABLE - -ifdef LCD_ENABLE -OPT_DEFS += -DLCD_ENABLE -ULIBS += -lm -endif - -ifeq ($(strip $(LCD_ENABLE)), yes) - SRC += $(VISUALIZER_DIR)/lcd_keyframes.c - ifeq ($(strip $(LCD_BACKLIGHT_ENABLE)), yes) - OPT_DEFS += -DLCD_BACKLIGHT_ENABLE - SRC += $(VISUALIZER_DIR)/lcd_backlight.c - SRC += $(VISUALIZER_DIR)/lcd_backlight_keyframes.c - endif -# Note, that the linker will strip out any resources that are not actually in use -SRC += $(VISUALIZER_DIR)/resources/lcd_logo.c -$(eval $(call ADD_DRIVER,LCD)) -endif - -ifeq ($(strip $(BACKLIGHT_ENABLE)), yes) -SRC += $(VISUALIZER_DIR)/led_backlight_keyframes.c -$(eval $(call ADD_DRIVER,LED)) -endif - -SRC += $(VISUALIZER_DIR)/default_animations.c - -include $(GFXLIB)/gfx.mk -# For the common_gfxconf.h -GFXINC += quantum/visualizer - -GFXSRC := $(patsubst $(TOP_DIR)/%,%,$(GFXSRC)) -GFXDEFS := $(patsubst %,-D%,$(patsubst -D%,%,$(GFXDEFS))) - -GDISP_LIST_COMMA=, -GDISP_LIST_EMPTY= -GDISP_LIST_SPACE=$(GDISP_LIST_EMPTY) $(GDISP_LIST_EMPTY) - -GDISP_DRIVER_LIST := $(strip $(GDISP_DRIVER_LIST)) -GDISP_DRIVER_LIST := $(subst $(GDISP_LIST_SPACE),$(GDISP_LIST_COMMA),$(GDISP_DRIVER_LIST)) - -GFXDEFS +=-DGDISP_DRIVER_LIST="$(GDISP_DRIVER_LIST)" - -ifneq ("$(wildcard $(KEYMAP_PATH)/visualizer.c)","") - SRC += $(KEYMAP_PATH)/visualizer.c -else - VISUALIZER_1 := $(KEYBOARD_PATH_1)/visualizer.c - VISUALIZER_2 := $(KEYBOARD_PATH_2)/visualizer.c - VISUALIZER_3 := $(KEYBOARD_PATH_3)/visualizer.c - VISUALIZER_4 := $(KEYBOARD_PATH_4)/visualizer.c - VISUALIZER_5 := $(KEYBOARD_PATH_5)/visualizer.c - - ifneq ("$(wildcard $(VISUALIZER_5))","") - SRC += $(VISUALIZER_5) - endif - ifneq ("$(wildcard $(VISUALIZER_4))","") - SRC += $(VISUALIZER_4) - endif - ifneq ("$(wildcard $(VISUALIZER_3))","") - SRC += $(VISUALIZER_3) - endif - ifneq ("$(wildcard $(VISUALIZER_2))","") - SRC += $(VISUALIZER_2) - endif - ifneq ("$(wildcard $(VISUALIZER_1))","") - SRC += $(VISUALIZER_1) - endif -endif - -ifdef EMULATOR -UINCDIR += $(TMK_DIR)/common -endif diff --git a/quantum/visualizer/visualizer_keyframes.c b/quantum/visualizer/visualizer_keyframes.c deleted file mode 100644 index 8f6a7e15a4..0000000000 --- a/quantum/visualizer/visualizer_keyframes.c +++ /dev/null @@ -1,23 +0,0 @@ -/* Copyright 2017 Fred Sundvik - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include "visualizer_keyframes.h" - -bool keyframe_no_operation(keyframe_animation_t* animation, visualizer_state_t* state) { - (void)animation; - (void)state; - return false; -} diff --git a/quantum/visualizer/visualizer_keyframes.h b/quantum/visualizer/visualizer_keyframes.h deleted file mode 100644 index c92ff16113..0000000000 --- a/quantum/visualizer/visualizer_keyframes.h +++ /dev/null @@ -1,23 +0,0 @@ -/* Copyright 2017 Fred Sundvik - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -#include "visualizer.h" - -// Some predefined keyframe functions that can be used by the user code -// Does nothing, useful for adding delays -bool keyframe_no_operation(keyframe_animation_t* animation, visualizer_state_t* state); diff --git a/show_options.mk b/show_options.mk index 35fca9c6b0..03008ccabf 100644 --- a/show_options.mk +++ b/show_options.mk @@ -32,7 +32,6 @@ HARDWARE_OPTION_NAMES = \ LCD_ENABLE \ LED_TABLES \ POINTING_DEVICE_ENABLE \ - VISUALIZER_ENABLE \ DIP_SWITCH_ENABLE OTHER_OPTION_NAMES = \ diff --git a/tmk_core/protocol/chibios/chibios.c b/tmk_core/protocol/chibios/chibios.c index e5d3a4c540..26181d8c76 100644 --- a/tmk_core/protocol/chibios/chibios.c +++ b/tmk_core/protocol/chibios/chibios.c @@ -46,9 +46,6 @@ #ifdef SERIAL_LINK_ENABLE # include "serial_link/system/serial_link.h" #endif -#ifdef VISUALIZER_ENABLE -# include "visualizer/visualizer.h" -#endif #ifdef MIDI_ENABLE # include "qmk_midi.h" #endif @@ -161,10 +158,6 @@ void protocol_init(void) { init_serial_link(); #endif -#ifdef VISUALIZER_ENABLE - visualizer_init(); -#endif - host_driver_t *driver = NULL; /* Wait until the USB or serial link is active */ @@ -214,9 +207,6 @@ void protocol_task(void) { #if !defined(NO_USB_STARTUP_CHECK) if (USB_DRIVER.state == USB_SUSPENDED) { print("[s]"); -# ifdef VISUALIZER_ENABLE - visualizer_suspend(); -# endif while (USB_DRIVER.state == USB_SUSPENDED) { /* Do this in the suspended state */ # ifdef SERIAL_LINK_ENABLE @@ -235,10 +225,6 @@ void protocol_task(void) { # ifdef MOUSEKEY_ENABLE mousekey_send(); # endif /* MOUSEKEY_ENABLE */ - -# ifdef VISUALIZER_ENABLE - visualizer_resume(); -# endif } #endif diff --git a/util/chibios_conf_updater.sh b/util/chibios_conf_updater.sh index 5ba8aa677b..d1640b6729 100755 --- a/util/chibios_conf_updater.sh +++ b/util/chibios_conf_updater.sh @@ -38,7 +38,7 @@ find_chibi_files() { local search_path="$1" shift local conditions=( "$@" ) - for file in $(find -L "$search_path" -not -path '*/lib/chibios*' -and -not -path '*/lib/ugfx*' -and -not -path '*/util/*' -and \( "${conditions[@]}" \) | sort) ; do + for file in $(find -L "$search_path" -not -path '*/lib/chibios*' -and -not -path '*/util/*' -and \( "${conditions[@]}" \) | sort) ; do if [ -z "$(grep 'include_next' "$file")" ] ; then echo $file fi From 951331cd8d24480bb95cdf2fe4527ea99b32f1c1 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Thu, 7 Oct 2021 01:45:59 +0100 Subject: [PATCH 206/595] Fix i2c_readReg16 (#14730) --- platforms/chibios/drivers/i2c_master.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/platforms/chibios/drivers/i2c_master.c b/platforms/chibios/drivers/i2c_master.c index 312b4c7d0f..63e85ae87d 100644 --- a/platforms/chibios/drivers/i2c_master.c +++ b/platforms/chibios/drivers/i2c_master.c @@ -137,7 +137,7 @@ i2c_status_t i2c_readReg16(uint8_t devaddr, uint16_t regaddr, uint8_t* data, uin i2c_address = devaddr; i2cStart(&I2C_DRIVER, &i2cconfig); uint8_t register_packet[2] = {regaddr >> 8, regaddr & 0xFF}; - msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), ®ister_packet, 2, data, length, TIME_MS2I(timeout)); + msg_t status = i2cMasterTransmitTimeout(&I2C_DRIVER, (i2c_address >> 1), register_packet, 2, data, length, TIME_MS2I(timeout)); return chibios_to_qmk(&status); } From 60297a1099e5a310bd10a4d59fcb80bbc7fe4be5 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Thu, 7 Oct 2021 01:47:14 +0100 Subject: [PATCH 207/595] Reuse of EEPROM debounce logic (#14699) * reuse rgb debounce logic * Refactor led matrix * Remove log line * timeout should not be hard coded --- quantum/eeconfig.h | 26 ++++++++++++++++++++++++++ quantum/led_matrix/led_matrix.c | 32 ++++++++++---------------------- quantum/rgb_matrix/rgb_matrix.c | 32 ++++++++++---------------------- 3 files changed, 46 insertions(+), 44 deletions(-) diff --git a/quantum/eeconfig.h b/quantum/eeconfig.h index bd39971b2c..22d874273c 100644 --- a/quantum/eeconfig.h +++ b/quantum/eeconfig.h @@ -111,3 +111,29 @@ void eeconfig_update_haptic(uint32_t val); bool eeconfig_read_handedness(void); void eeconfig_update_handedness(bool val); + +#define EECONFIG_DEBOUNCE_HELPER(name, offset, config) \ + static uint8_t dirty_##name = false; \ + \ + static inline void eeconfig_init_##name(void) { \ + eeprom_read_block(&config, offset, sizeof(config)); \ + dirty_##name = false; \ + } \ + static inline void eeconfig_flush_##name(bool force) { \ + if (force || dirty_##name) { \ + eeprom_update_block(&config, offset, sizeof(config)); \ + dirty_##name = false; \ + } \ + } \ + static inline void eeconfig_flush_##name##_task(uint16_t timeout) { \ + static uint16_t flush_timer = 0; \ + if (timer_elapsed(flush_timer) > timeout) { \ + eeconfig_flush_##name(false); \ + flush_timer = timer_read(); \ + } \ + } \ + static inline void eeconfig_flag_##name(bool v) { dirty_##name |= v; } \ + static inline void eeconfig_write_##name(typeof(config) conf) { \ + memcpy(&config, &conf, sizeof(config)); \ + eeconfig_flag_##name(true); \ + } diff --git a/quantum/led_matrix/led_matrix.c b/quantum/led_matrix/led_matrix.c index 50510e49aa..2f0086d368 100644 --- a/quantum/led_matrix/led_matrix.c +++ b/quantum/led_matrix/led_matrix.c @@ -33,14 +33,6 @@ const led_point_t k_led_matrix_center = {112, 32}; const led_point_t k_led_matrix_center = LED_MATRIX_CENTER; #endif -// clang-format off -#ifndef LED_MATRIX_IMMEDIATE_EEPROM -# define led_eeconfig_update(v) led_update_eeprom |= v -#else -# define led_eeconfig_update(v) if (v) eeconfig_update_led_matrix() -#endif -// clang-format on - // Generic effect runners #include "led_matrix_runners.inc" @@ -107,7 +99,6 @@ last_hit_t g_last_hit_tracker; // internals static bool suspend_state = false; -static bool led_update_eeprom = false; static uint8_t led_last_enable = UINT8_MAX; static uint8_t led_last_effect = UINT8_MAX; static effect_params_t led_effect_params = {0, LED_FLAG_ALL, false}; @@ -127,9 +118,7 @@ static last_hit_t last_hit_buffer; const uint8_t k_led_matrix_split[2] = LED_MATRIX_SPLIT; #endif -void eeconfig_read_led_matrix(void) { eeprom_read_block(&led_matrix_eeconfig, EECONFIG_LED_MATRIX, sizeof(led_matrix_eeconfig)); } - -void eeconfig_update_led_matrix(void) { eeprom_update_block(&led_matrix_eeconfig, EECONFIG_LED_MATRIX, sizeof(led_matrix_eeconfig)); } +EECONFIG_DEBOUNCE_HELPER(led_matrix, EECONFIG_LED_MATRIX, led_matrix_eeconfig); void eeconfig_update_led_matrix_default(void) { dprintf("eeconfig_update_led_matrix_default\n"); @@ -138,7 +127,7 @@ void eeconfig_update_led_matrix_default(void) { led_matrix_eeconfig.val = LED_MATRIX_STARTUP_VAL; led_matrix_eeconfig.speed = LED_MATRIX_STARTUP_SPD; led_matrix_eeconfig.flags = LED_FLAG_ALL; - eeconfig_update_led_matrix(); + eeconfig_flush_led_matrix(true); } void eeconfig_debug_led_matrix(void) { @@ -279,9 +268,8 @@ static void led_task_timers(void) { } static void led_task_sync(void) { + eeconfig_flush_led_matrix(false); // next task - if (led_update_eeprom) eeconfig_update_led_matrix(); - led_update_eeprom = false; if (sync_timer_elapsed32(g_led_timer) >= LED_MATRIX_LED_FLUSH_LIMIT) led_task_state = STARTING; } @@ -449,7 +437,7 @@ void led_matrix_init(void) { eeconfig_update_led_matrix_default(); } - eeconfig_read_led_matrix(); + eeconfig_init_led_matrix(); if (!led_matrix_eeconfig.mode) { dprintf("led_matrix_init_drivers led_matrix_eeconfig.mode = 0. Write default values to EEPROM.\n"); eeconfig_update_led_matrix_default(); @@ -472,7 +460,7 @@ bool led_matrix_get_suspend_state(void) { return suspend_state; } void led_matrix_toggle_eeprom_helper(bool write_to_eeprom) { led_matrix_eeconfig.enable ^= 1; led_task_state = STARTING; - led_eeconfig_update(write_to_eeprom); + eeconfig_flag_led_matrix(write_to_eeprom); dprintf("led matrix toggle [%s]: led_matrix_eeconfig.enable = %u\n", (write_to_eeprom) ? "EEPROM" : "NOEEPROM", led_matrix_eeconfig.enable); } void led_matrix_toggle_noeeprom(void) { led_matrix_toggle_eeprom_helper(false); } @@ -480,7 +468,7 @@ void led_matrix_toggle(void) { led_matrix_toggle_eeprom_helper(true); } void led_matrix_enable(void) { led_matrix_enable_noeeprom(); - led_eeconfig_update(true); + eeconfig_flag_led_matrix(true); } void led_matrix_enable_noeeprom(void) { @@ -490,7 +478,7 @@ void led_matrix_enable_noeeprom(void) { void led_matrix_disable(void) { led_matrix_disable_noeeprom(); - led_eeconfig_update(true); + eeconfig_flag_led_matrix(true); } void led_matrix_disable_noeeprom(void) { @@ -512,7 +500,7 @@ void led_matrix_mode_eeprom_helper(uint8_t mode, bool write_to_eeprom) { led_matrix_eeconfig.mode = mode; } led_task_state = STARTING; - led_eeconfig_update(write_to_eeprom); + eeconfig_flag_led_matrix(write_to_eeprom); dprintf("led matrix mode [%s]: %u\n", (write_to_eeprom) ? "EEPROM" : "NOEEPROM", led_matrix_eeconfig.mode); } void led_matrix_mode_noeeprom(uint8_t mode) { led_matrix_mode_eeprom_helper(mode, false); } @@ -539,7 +527,7 @@ void led_matrix_set_val_eeprom_helper(uint8_t val, bool write_to_eeprom) { return; } led_matrix_eeconfig.val = (val > LED_MATRIX_MAXIMUM_BRIGHTNESS) ? LED_MATRIX_MAXIMUM_BRIGHTNESS : val; - led_eeconfig_update(write_to_eeprom); + eeconfig_flag_led_matrix(write_to_eeprom); dprintf("led matrix set val [%s]: %u\n", (write_to_eeprom) ? "EEPROM" : "NOEEPROM", led_matrix_eeconfig.val); } void led_matrix_set_val_noeeprom(uint8_t val) { led_matrix_set_val_eeprom_helper(val, false); } @@ -557,7 +545,7 @@ void led_matrix_decrease_val(void) { led_matrix_decrease_val_helper(true); } void led_matrix_set_speed_eeprom_helper(uint8_t speed, bool write_to_eeprom) { led_matrix_eeconfig.speed = speed; - led_eeconfig_update(write_to_eeprom); + eeconfig_flag_led_matrix(write_to_eeprom); dprintf("led matrix set speed [%s]: %u\n", (write_to_eeprom) ? "EEPROM" : "NOEEPROM", led_matrix_eeconfig.speed); } void led_matrix_set_speed_noeeprom(uint8_t speed) { led_matrix_set_speed_eeprom_helper(speed, false); } diff --git a/quantum/rgb_matrix/rgb_matrix.c b/quantum/rgb_matrix/rgb_matrix.c index 8f00b40877..0c9ef8f7a7 100644 --- a/quantum/rgb_matrix/rgb_matrix.c +++ b/quantum/rgb_matrix/rgb_matrix.c @@ -31,14 +31,6 @@ const led_point_t k_rgb_matrix_center = {112, 32}; const led_point_t k_rgb_matrix_center = RGB_MATRIX_CENTER; #endif -// clang-format off -#ifndef RGB_MATRIX_IMMEDIATE_EEPROM -# define rgb_eeconfig_update(v) rgb_update_eeprom |= v -#else -# define rgb_eeconfig_update(v) if (v) eeconfig_update_rgb_matrix() -#endif -// clang-format on - __attribute__((weak)) RGB rgb_matrix_hsv_to_rgb(HSV hsv) { return hsv_to_rgb(hsv); } // Generic effect runners @@ -128,7 +120,6 @@ last_hit_t g_last_hit_tracker; // internals static bool suspend_state = false; -static bool rgb_update_eeprom = false; static uint8_t rgb_last_enable = UINT8_MAX; static uint8_t rgb_last_effect = UINT8_MAX; static effect_params_t rgb_effect_params = {0, LED_FLAG_ALL, false}; @@ -148,9 +139,7 @@ static last_hit_t last_hit_buffer; const uint8_t k_rgb_matrix_split[2] = RGB_MATRIX_SPLIT; #endif -void eeconfig_read_rgb_matrix(void) { eeprom_read_block(&rgb_matrix_config, EECONFIG_RGB_MATRIX, sizeof(rgb_matrix_config)); } - -void eeconfig_update_rgb_matrix(void) { eeprom_update_block(&rgb_matrix_config, EECONFIG_RGB_MATRIX, sizeof(rgb_matrix_config)); } +EECONFIG_DEBOUNCE_HELPER(rgb_matrix, EECONFIG_RGB_MATRIX, rgb_matrix_config); void eeconfig_update_rgb_matrix_default(void) { dprintf("eeconfig_update_rgb_matrix_default\n"); @@ -159,7 +148,7 @@ void eeconfig_update_rgb_matrix_default(void) { rgb_matrix_config.hsv = (HSV){RGB_MATRIX_STARTUP_HUE, RGB_MATRIX_STARTUP_SAT, RGB_MATRIX_STARTUP_VAL}; rgb_matrix_config.speed = RGB_MATRIX_STARTUP_SPD; rgb_matrix_config.flags = LED_FLAG_ALL; - eeconfig_update_rgb_matrix(); + eeconfig_flush_rgb_matrix(true); } void eeconfig_debug_rgb_matrix(void) { @@ -314,9 +303,8 @@ static void rgb_task_timers(void) { } static void rgb_task_sync(void) { + eeconfig_flush_rgb_matrix(false); // next task - if (rgb_update_eeprom) eeconfig_update_rgb_matrix(); - rgb_update_eeprom = false; if (sync_timer_elapsed32(g_rgb_timer) >= RGB_MATRIX_LED_FLUSH_LIMIT) rgb_task_state = STARTING; } @@ -491,7 +479,7 @@ void rgb_matrix_init(void) { eeconfig_update_rgb_matrix_default(); } - eeconfig_read_rgb_matrix(); + eeconfig_init_rgb_matrix(); if (!rgb_matrix_config.mode) { dprintf("rgb_matrix_init_drivers rgb_matrix_config.mode = 0. Write default values to EEPROM.\n"); eeconfig_update_rgb_matrix_default(); @@ -514,7 +502,7 @@ bool rgb_matrix_get_suspend_state(void) { return suspend_state; } void rgb_matrix_toggle_eeprom_helper(bool write_to_eeprom) { rgb_matrix_config.enable ^= 1; rgb_task_state = STARTING; - rgb_eeconfig_update(write_to_eeprom); + eeconfig_flag_rgb_matrix(write_to_eeprom); dprintf("rgb matrix toggle [%s]: rgb_matrix_config.enable = %u\n", (write_to_eeprom) ? "EEPROM" : "NOEEPROM", rgb_matrix_config.enable); } void rgb_matrix_toggle_noeeprom(void) { rgb_matrix_toggle_eeprom_helper(false); } @@ -522,7 +510,7 @@ void rgb_matrix_toggle(void) { rgb_matrix_toggle_eeprom_helper(true); } void rgb_matrix_enable(void) { rgb_matrix_enable_noeeprom(); - rgb_eeconfig_update(true); + eeconfig_flag_rgb_matrix(true); } void rgb_matrix_enable_noeeprom(void) { @@ -532,7 +520,7 @@ void rgb_matrix_enable_noeeprom(void) { void rgb_matrix_disable(void) { rgb_matrix_disable_noeeprom(); - rgb_eeconfig_update(true); + eeconfig_flag_rgb_matrix(true); } void rgb_matrix_disable_noeeprom(void) { @@ -554,7 +542,7 @@ void rgb_matrix_mode_eeprom_helper(uint8_t mode, bool write_to_eeprom) { rgb_matrix_config.mode = mode; } rgb_task_state = STARTING; - rgb_eeconfig_update(write_to_eeprom); + eeconfig_flag_rgb_matrix(write_to_eeprom); dprintf("rgb matrix mode [%s]: %u\n", (write_to_eeprom) ? "EEPROM" : "NOEEPROM", rgb_matrix_config.mode); } void rgb_matrix_mode_noeeprom(uint8_t mode) { rgb_matrix_mode_eeprom_helper(mode, false); } @@ -583,7 +571,7 @@ void rgb_matrix_sethsv_eeprom_helper(uint16_t hue, uint8_t sat, uint8_t val, boo rgb_matrix_config.hsv.h = hue; rgb_matrix_config.hsv.s = sat; rgb_matrix_config.hsv.v = (val > RGB_MATRIX_MAXIMUM_BRIGHTNESS) ? RGB_MATRIX_MAXIMUM_BRIGHTNESS : val; - rgb_eeconfig_update(write_to_eeprom); + eeconfig_flag_rgb_matrix(write_to_eeprom); dprintf("rgb matrix set hsv [%s]: %u,%u,%u\n", (write_to_eeprom) ? "EEPROM" : "NOEEPROM", rgb_matrix_config.hsv.h, rgb_matrix_config.hsv.s, rgb_matrix_config.hsv.v); } void rgb_matrix_sethsv_noeeprom(uint16_t hue, uint8_t sat, uint8_t val) { rgb_matrix_sethsv_eeprom_helper(hue, sat, val, false); } @@ -620,7 +608,7 @@ void rgb_matrix_decrease_val(void) { rgb_matrix_decrease_val_helper(true); } void rgb_matrix_set_speed_eeprom_helper(uint8_t speed, bool write_to_eeprom) { rgb_matrix_config.speed = speed; - rgb_eeconfig_update(write_to_eeprom); + eeconfig_flag_rgb_matrix(write_to_eeprom); dprintf("rgb matrix set speed [%s]: %u\n", (write_to_eeprom) ? "EEPROM" : "NOEEPROM", rgb_matrix_config.speed); } void rgb_matrix_set_speed_noeeprom(uint8_t speed) { rgb_matrix_set_speed_eeprom_helper(speed, false); } From 1c0347b8b85de03691c7810f98f38bb245783985 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Thu, 7 Oct 2021 02:32:05 +0100 Subject: [PATCH 208/595] Remove SERIAL_LINK feature (#14727) * Remove SERIAL_LINK * more stale paths in doxygen-todo * Fix * More refs * Update testing docs * Update doxygen-todo Co-authored-by: Ryan Co-authored-by: Ryan --- build_test.mk | 1 - common_features.mk | 13 - disable_features.mk | 1 - docs/unit_testing.md | 4 +- doxygen-todo | 8 - keyboards/ergodox_infinity/ergodox_infinity.c | 1 - quantum/keyboard.c | 7 - quantum/sequencer/tests/rules.mk | 2 +- quantum/serial_link/LICENSE | 19 - quantum/serial_link/README.md | 1 - quantum/serial_link/protocol/byte_stuffer.c | 135 ------ quantum/serial_link/protocol/byte_stuffer.h | 34 -- quantum/serial_link/protocol/frame_router.c | 64 --- quantum/serial_link/protocol/frame_router.h | 35 -- .../serial_link/protocol/frame_validator.c | 57 --- .../serial_link/protocol/frame_validator.h | 31 -- quantum/serial_link/protocol/physical.h | 27 -- quantum/serial_link/protocol/transport.c | 121 ----- quantum/serial_link/protocol/transport.h | 139 ------ .../protocol/triple_buffered_object.c | 77 --- .../protocol/triple_buffered_object.h | 44 -- quantum/serial_link/system/serial_link.c | 250 ---------- quantum/serial_link/system/serial_link.h | 54 --- quantum/serial_link/tests/Makefile | 61 --- .../serial_link/tests/byte_stuffer_tests.cpp | 450 ------------------ .../serial_link/tests/frame_router_tests.cpp | 204 -------- .../tests/frame_validator_tests.cpp | 100 ---- quantum/serial_link/tests/rules.mk | 22 - quantum/serial_link/tests/testlist.mk | 6 - quantum/serial_link/tests/transport_tests.cpp | 184 ------- .../tests/triple_buffered_object_tests.cpp | 80 ---- show_options.mk | 1 - testlist.mk | 1 - tmk_core/common/sync_timer.c | 2 +- tmk_core/common/sync_timer.h | 2 +- tmk_core/protocol/chibios/chibios.c | 21 +- 36 files changed, 7 insertions(+), 2252 deletions(-) delete mode 100644 quantum/serial_link/LICENSE delete mode 100644 quantum/serial_link/README.md delete mode 100644 quantum/serial_link/protocol/byte_stuffer.c delete mode 100644 quantum/serial_link/protocol/byte_stuffer.h delete mode 100644 quantum/serial_link/protocol/frame_router.c delete mode 100644 quantum/serial_link/protocol/frame_router.h delete mode 100644 quantum/serial_link/protocol/frame_validator.c delete mode 100644 quantum/serial_link/protocol/frame_validator.h delete mode 100644 quantum/serial_link/protocol/physical.h delete mode 100644 quantum/serial_link/protocol/transport.c delete mode 100644 quantum/serial_link/protocol/transport.h delete mode 100644 quantum/serial_link/protocol/triple_buffered_object.c delete mode 100644 quantum/serial_link/protocol/triple_buffered_object.h delete mode 100644 quantum/serial_link/system/serial_link.c delete mode 100644 quantum/serial_link/system/serial_link.h delete mode 100644 quantum/serial_link/tests/Makefile delete mode 100644 quantum/serial_link/tests/byte_stuffer_tests.cpp delete mode 100644 quantum/serial_link/tests/frame_router_tests.cpp delete mode 100644 quantum/serial_link/tests/frame_validator_tests.cpp delete mode 100644 quantum/serial_link/tests/rules.mk delete mode 100644 quantum/serial_link/tests/testlist.mk delete mode 100644 quantum/serial_link/tests/transport_tests.cpp delete mode 100644 quantum/serial_link/tests/triple_buffered_object_tests.cpp diff --git a/build_test.mk b/build_test.mk index 037577bf90..96487c01fa 100644 --- a/build_test.mk +++ b/build_test.mk @@ -55,7 +55,6 @@ include common_features.mk include $(TMK_PATH)/common.mk include $(QUANTUM_PATH)/debounce/tests/rules.mk include $(QUANTUM_PATH)/sequencer/tests/rules.mk -include $(QUANTUM_PATH)/serial_link/tests/rules.mk include $(TMK_PATH)/common/test/rules.mk ifneq ($(filter $(FULL_TESTS),$(TEST)),) include build_full_test.mk diff --git a/common_features.mk b/common_features.mk index fc9595ddd7..3c956b7aaf 100644 --- a/common_features.mk +++ b/common_features.mk @@ -13,8 +13,6 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see . -SERIAL_PATH := $(QUANTUM_PATH)/serial_link - QUANTUM_SRC += \ $(QUANTUM_DIR)/quantum.c \ $(QUANTUM_DIR)/send_string.c \ @@ -363,17 +361,6 @@ ifeq ($(strip $(PRINTING_ENABLE)), yes) SRC += $(TMK_DIR)/protocol/serial_uart.c endif -ifeq ($(strip $(SERIAL_LINK_ENABLE)), yes) - SERIAL_SRC := $(wildcard $(SERIAL_PATH)/protocol/*.c) - SERIAL_SRC += $(wildcard $(SERIAL_PATH)/system/*.c) - SERIAL_DEFS += -DSERIAL_LINK_ENABLE - COMMON_VPATH += $(SERIAL_PATH) - - SRC += $(patsubst $(QUANTUM_PATH)/%,%,$(SERIAL_SRC)) - OPT_DEFS += $(SERIAL_DEFS) - VAPTH += $(SERIAL_PATH) -endif - VARIABLE_TRACE ?= no ifneq ($(strip $(VARIABLE_TRACE)),no) SRC += $(QUANTUM_DIR)/variable_trace.c diff --git a/disable_features.mk b/disable_features.mk index 6733e4e808..090a9b5a11 100644 --- a/disable_features.mk +++ b/disable_features.mk @@ -19,7 +19,6 @@ FEATURE_NAMES += PS2_MOUSE FEATURE_NAMES += RGBLIGHT FEATURE_NAMES += RGB_MATRIX FEATURE_NAMES += SLEEP_LED -FEATURE_NAMES += SERIAL_LINK FEATURE_NAMES += STENO FEATURE_NAMES += SWAP_HANDS FEATURE_NAMES += WATCHDOG diff --git a/docs/unit_testing.md b/docs/unit_testing.md index 7310da8d0b..47a1055796 100644 --- a/docs/unit_testing.md +++ b/docs/unit_testing.md @@ -20,12 +20,12 @@ One thing to remember, is that you have to append `extern "C"` around all of you ## Adding Tests for New or Existing Features -If you want to unit test some feature, then take a look at the existing serial_link tests, in the `quantum/serial_link/tests folder`, and follow the steps below to create a similar structure. +If you want to unit test a feature, take a look at some of the existing tests, for example those in the `quantum/sequencer/tests` folder. Then follow the steps below to create a similar structure. 1. If it doesn't already exist, add a test subfolder to the folder containing the feature. 2. Create a `testlist.mk` and a `rules.mk` file in that folder. 3. Include those files from the root folder `testlist.mk`and `build_test.mk` respectively. -4. Add a new name for your testgroup to the `testlist.mk` file. Each group defined there will be a separate executable. And that's how you can support mocking out different parts. Note that it's worth adding some common prefix, just like it's done for the serial_link tests. The reason for that is that the make command allows substring filtering, so this way you can easily run a subset of the tests. +4. Add a new name for your testgroup to the `testlist.mk` file. Each group defined there will be a separate executable. And that's how you can support mocking out different parts. Note that it's worth adding some common prefix, just like it's done for the existing tests. The reason for that is that the make command allows substring filtering, so this way you can easily run a subset of the tests. 5. Define the source files and required options in the `rules.mk` file. * `_SRC` for source files * `_DEFS` for additional defines diff --git a/doxygen-todo b/doxygen-todo index 54d7e9ef7b..4151627e4a 100644 --- a/doxygen-todo +++ b/doxygen-todo @@ -6,16 +6,8 @@ tmk_core/protocol/midi/bytequeue tmk_core/protocol/midi/Config tmk_core/protocol/usb_hid tmk_core/protocol/vusb -tmk_core/tool -tmk_core/tool/chibios quantum -quantum/api quantum/audio quantum/keymap_extras quantum/process_keycode -quantum/serial_link -quantum/serial_link/protocol -quantum/serial_link/system -quantum/serial_link/tests -quantum/tools drivers diff --git a/keyboards/ergodox_infinity/ergodox_infinity.c b/keyboards/ergodox_infinity/ergodox_infinity.c index d2a311ee8b..88028d3638 100644 --- a/keyboards/ergodox_infinity/ergodox_infinity.c +++ b/keyboards/ergodox_infinity/ergodox_infinity.c @@ -3,7 +3,6 @@ #include #include #include "eeconfig.h" -#include "serial_link/system/serial_link.h" #define RED_PIN 1 #define GREEN_PIN 2 diff --git a/quantum/keyboard.c b/quantum/keyboard.c index c2e2234f94..ee7fa2bd4b 100644 --- a/quantum/keyboard.c +++ b/quantum/keyboard.c @@ -61,9 +61,6 @@ along with this program. If not, see . #ifdef STENO_ENABLE # include "process_steno.h" #endif -#ifdef SERIAL_LINK_ENABLE -# include "serial_link/system/serial_link.h" -#endif #ifdef POINTING_DEVICE_ENABLE # include "pointing_device.h" #endif @@ -511,10 +508,6 @@ MATRIX_LOOP_END: adb_mouse_task(); #endif -#ifdef SERIAL_LINK_ENABLE - serial_link_update(); -#endif - #ifdef POINTING_DEVICE_ENABLE pointing_device_task(); #endif diff --git a/quantum/sequencer/tests/rules.mk b/quantum/sequencer/tests/rules.mk index 76c221cf92..87a204669c 100644 --- a/quantum/sequencer/tests/rules.mk +++ b/quantum/sequencer/tests/rules.mk @@ -1,5 +1,5 @@ # The letter case of these variables might seem odd. However: -# - it is consistent with the serial_link example that is used as a reference in the Unit Testing article (https://docs.qmk.fm/#/unit_testing?id=adding-tests-for-new-or-existing-features) +# - it is consistent with the example that is used as a reference in the Unit Testing article (https://docs.qmk.fm/#/unit_testing?id=adding-tests-for-new-or-existing-features) # - Neither `make test:sequencer` or `make test:SEQUENCER` work when using SCREAMING_SNAKE_CASE sequencer_DEFS := -DNO_DEBUG -DMIDI_MOCKED diff --git a/quantum/serial_link/LICENSE b/quantum/serial_link/LICENSE deleted file mode 100644 index d13cc4b26a..0000000000 --- a/quantum/serial_link/LICENSE +++ /dev/null @@ -1,19 +0,0 @@ -The MIT License (MIT) - -Permission is hereby granted, free of charge, to any person obtaining a copy -of this software and associated documentation files (the "Software"), to deal -in the Software without restriction, including without limitation the rights -to use, copy, modify, merge, publish, distribute, sublicense, and/or sell -copies of the Software, and to permit persons to whom the Software is -furnished to do so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. diff --git a/quantum/serial_link/README.md b/quantum/serial_link/README.md deleted file mode 100644 index 05871dbdf7..0000000000 --- a/quantum/serial_link/README.md +++ /dev/null @@ -1 +0,0 @@ -# qmk_serial_link diff --git a/quantum/serial_link/protocol/byte_stuffer.c b/quantum/serial_link/protocol/byte_stuffer.c deleted file mode 100644 index d3a91d8286..0000000000 --- a/quantum/serial_link/protocol/byte_stuffer.c +++ /dev/null @@ -1,135 +0,0 @@ -/* -The MIT License (MIT) - -Copyright (c) 2016 Fred Sundvik - -Permission is hereby granted, free of charge, to any person obtaining a copy -of this software and associated documentation files (the "Software"), to deal -in the Software without restriction, including without limitation the rights -to use, copy, modify, merge, publish, distribute, sublicense, and/or sell -copies of the Software, and to permit persons to whom the Software is -furnished to do so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ - -#include "serial_link/protocol/byte_stuffer.h" -#include "serial_link/protocol/frame_validator.h" -#include "serial_link/protocol/physical.h" -#include - -// This implements the "Consistent overhead byte stuffing protocol" -// https://en.wikipedia.org/wiki/Consistent_Overhead_Byte_Stuffing -// http://www.stuartcheshire.org/papers/COBSforToN.pdf - -typedef struct byte_stuffer_state { - uint16_t next_zero; - uint16_t data_pos; - bool long_frame; - uint8_t data[MAX_FRAME_SIZE]; -} byte_stuffer_state_t; - -static byte_stuffer_state_t states[NUM_LINKS]; - -void init_byte_stuffer_state(byte_stuffer_state_t* state) { - state->next_zero = 0; - state->data_pos = 0; - state->long_frame = false; -} - -void init_byte_stuffer(void) { - int i; - for (i = 0; i < NUM_LINKS; i++) { - init_byte_stuffer_state(&states[i]); - } -} - -void byte_stuffer_recv_byte(uint8_t link, uint8_t data) { - byte_stuffer_state_t* state = &states[link]; - // Start of a new frame - if (state->next_zero == 0) { - state->next_zero = data; - state->long_frame = data == 0xFF; - state->data_pos = 0; - return; - } - - state->next_zero--; - if (data == 0) { - if (state->next_zero == 0) { - // The frame is completed - if (state->data_pos > 0) { - validator_recv_frame(link, state->data, state->data_pos); - } - } else { - // The frame is invalid, so reset - init_byte_stuffer_state(state); - } - } else { - if (state->data_pos == MAX_FRAME_SIZE) { - // We exceeded our maximum frame size - // therefore there's nothing else to do than reset to a new frame - state->next_zero = data; - state->long_frame = data == 0xFF; - state->data_pos = 0; - } else if (state->next_zero == 0) { - if (state->long_frame) { - // This is part of a long frame, so continue - state->next_zero = data; - state->long_frame = data == 0xFF; - } else { - // Special case for zeroes - state->next_zero = data; - state->data[state->data_pos++] = 0; - } - } else { - state->data[state->data_pos++] = data; - } - } -} - -static void send_block(uint8_t link, uint8_t* start, uint8_t* end, uint8_t num_non_zero) { - send_data(link, &num_non_zero, 1); - if (end > start) { - send_data(link, start, end - start); - } -} - -void byte_stuffer_send_frame(uint8_t link, uint8_t* data, uint16_t size) { - const uint8_t zero = 0; - if (size > 0) { - uint16_t num_non_zero = 1; - uint8_t* end = data + size; - uint8_t* start = data; - while (data < end) { - if (num_non_zero == 0xFF) { - // There's more data after big non-zero block - // So send it, and start a new block - send_block(link, start, data, num_non_zero); - start = data; - num_non_zero = 1; - } else { - if (*data == 0) { - // A zero encountered, so send the block - send_block(link, start, data, num_non_zero); - start = data + 1; - num_non_zero = 1; - } else { - num_non_zero++; - } - ++data; - } - } - send_block(link, start, data, num_non_zero); - send_data(link, &zero, 1); - } -} diff --git a/quantum/serial_link/protocol/byte_stuffer.h b/quantum/serial_link/protocol/byte_stuffer.h deleted file mode 100644 index 397ed3baae..0000000000 --- a/quantum/serial_link/protocol/byte_stuffer.h +++ /dev/null @@ -1,34 +0,0 @@ -/* -The MIT License (MIT) - -Copyright (c) 2016 Fred Sundvik - -Permission is hereby granted, free of charge, to any person obtaining a copy -of this software and associated documentation files (the "Software"), to deal -in the Software without restriction, including without limitation the rights -to use, copy, modify, merge, publish, distribute, sublicense, and/or sell -copies of the Software, and to permit persons to whom the Software is -furnished to do so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ - -#pragma once - -#include - -#define MAX_FRAME_SIZE 1024 -#define NUM_LINKS 2 - -void init_byte_stuffer(void); -void byte_stuffer_recv_byte(uint8_t link, uint8_t data); -void byte_stuffer_send_frame(uint8_t link, uint8_t* data, uint16_t size); diff --git a/quantum/serial_link/protocol/frame_router.c b/quantum/serial_link/protocol/frame_router.c deleted file mode 100644 index 5292673700..0000000000 --- a/quantum/serial_link/protocol/frame_router.c +++ /dev/null @@ -1,64 +0,0 @@ -/* -The MIT License (MIT) - -Copyright (c) 2016 Fred Sundvik - -Permission is hereby granted, free of charge, to any person obtaining a copy -of this software and associated documentation files (the "Software"), to deal -in the Software without restriction, including without limitation the rights -to use, copy, modify, merge, publish, distribute, sublicense, and/or sell -copies of the Software, and to permit persons to whom the Software is -furnished to do so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ - -#include "serial_link/protocol/frame_router.h" -#include "serial_link/protocol/transport.h" -#include "serial_link/protocol/frame_validator.h" - -static bool is_master; - -void router_set_master(bool master) { is_master = master; } - -void route_incoming_frame(uint8_t link, uint8_t* data, uint16_t size) { - if (is_master) { - if (link == DOWN_LINK) { - transport_recv_frame(data[size - 1], data, size - 1); - } - } else { - if (link == UP_LINK) { - if (data[size - 1] & 1) { - transport_recv_frame(0, data, size - 1); - } - data[size - 1] >>= 1; - validator_send_frame(DOWN_LINK, data, size); - } else { - data[size - 1]++; - validator_send_frame(UP_LINK, data, size); - } - } -} - -void router_send_frame(uint8_t destination, uint8_t* data, uint16_t size) { - if (destination == 0) { - if (!is_master) { - data[size] = 1; - validator_send_frame(UP_LINK, data, size + 1); - } - } else { - if (is_master) { - data[size] = destination; - validator_send_frame(DOWN_LINK, data, size + 1); - } - } -} diff --git a/quantum/serial_link/protocol/frame_router.h b/quantum/serial_link/protocol/frame_router.h deleted file mode 100644 index 9325fe4eed..0000000000 --- a/quantum/serial_link/protocol/frame_router.h +++ /dev/null @@ -1,35 +0,0 @@ -/* -The MIT License (MIT) - -Copyright (c) 2016 Fred Sundvik - -Permission is hereby granted, free of charge, to any person obtaining a copy -of this software and associated documentation files (the "Software"), to deal -in the Software without restriction, including without limitation the rights -to use, copy, modify, merge, publish, distribute, sublicense, and/or sell -copies of the Software, and to permit persons to whom the Software is -furnished to do so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ - -#pragma once - -#include -#include - -#define UP_LINK 0 -#define DOWN_LINK 1 - -void router_set_master(bool master); -void route_incoming_frame(uint8_t link, uint8_t* data, uint16_t size); -void router_send_frame(uint8_t destination, uint8_t* data, uint16_t size); diff --git a/quantum/serial_link/protocol/frame_validator.c b/quantum/serial_link/protocol/frame_validator.c deleted file mode 100644 index bc9136f70b..0000000000 --- a/quantum/serial_link/protocol/frame_validator.c +++ /dev/null @@ -1,57 +0,0 @@ -/* -The MIT License (MIT) - -Copyright (c) 2016 Fred Sundvik - -Permission is hereby granted, free of charge, to any person obtaining a copy -of this software and associated documentation files (the "Software"), to deal -in the Software without restriction, including without limitation the rights -to use, copy, modify, merge, publish, distribute, sublicense, and/or sell -copies of the Software, and to permit persons to whom the Software is -furnished to do so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ - -#include "serial_link/protocol/frame_validator.h" -#include "serial_link/protocol/frame_router.h" -#include "serial_link/protocol/byte_stuffer.h" -#include - -const uint32_t poly8_lookup[256] = {0, 0x77073096, 0xEE0E612C, 0x990951BA, 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3, 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988, 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91, 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE, 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7, 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC, 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5, 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172, 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B, 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940, 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59, 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116, 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F, 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924, 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D, - 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A, 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433, 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818, 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01, 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E, 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457, 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C, 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65, 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2, 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB, 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0, 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9, 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086, 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F, 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4, 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD, - 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A, 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683, 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8, 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1, 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE, 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7, 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC, 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5, 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252, 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B, 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60, 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79, 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236, 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F, 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04, 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D, - 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A, 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713, 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38, 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21, 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E, 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777, 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C, 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45, 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2, 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB, 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0, 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9, 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6, 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF, 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94, 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D}; - -static uint32_t crc32_byte(uint8_t* p, uint32_t bytelength) { - uint32_t crc = 0xffffffff; - while (bytelength-- != 0) crc = poly8_lookup[((uint8_t)crc ^ *(p++))] ^ (crc >> 8); - // return (~crc); also works - return (crc ^ 0xffffffff); -} - -void validator_recv_frame(uint8_t link, uint8_t* data, uint16_t size) { - if (size > 4) { - uint32_t frame_crc; - memcpy(&frame_crc, data + size - 4, 4); - uint32_t expected_crc = crc32_byte(data, size - 4); - if (frame_crc == expected_crc) { - route_incoming_frame(link, data, size - 4); - } - } -} - -void validator_send_frame(uint8_t link, uint8_t* data, uint16_t size) { - uint32_t crc = crc32_byte(data, size); - memcpy(data + size, &crc, 4); - byte_stuffer_send_frame(link, data, size + 4); -} diff --git a/quantum/serial_link/protocol/frame_validator.h b/quantum/serial_link/protocol/frame_validator.h deleted file mode 100644 index 0f78768a00..0000000000 --- a/quantum/serial_link/protocol/frame_validator.h +++ /dev/null @@ -1,31 +0,0 @@ -/* -The MIT License (MIT) - -Copyright (c) 2016 Fred Sundvik - -Permission is hereby granted, free of charge, to any person obtaining a copy -of this software and associated documentation files (the "Software"), to deal -in the Software without restriction, including without limitation the rights -to use, copy, modify, merge, publish, distribute, sublicense, and/or sell -copies of the Software, and to permit persons to whom the Software is -furnished to do so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ - -#pragma once - -#include - -void validator_recv_frame(uint8_t link, uint8_t* data, uint16_t size); -// The buffer pointed to by the data needs 4 additional bytes -void validator_send_frame(uint8_t link, uint8_t* data, uint16_t size); diff --git a/quantum/serial_link/protocol/physical.h b/quantum/serial_link/protocol/physical.h deleted file mode 100644 index 399c9d1f76..0000000000 --- a/quantum/serial_link/protocol/physical.h +++ /dev/null @@ -1,27 +0,0 @@ -/* -The MIT License (MIT) - -Copyright (c) 2016 Fred Sundvik - -Permission is hereby granted, free of charge, to any person obtaining a copy -of this software and associated documentation files (the "Software"), to deal -in the Software without restriction, including without limitation the rights -to use, copy, modify, merge, publish, distribute, sublicense, and/or sell -copies of the Software, and to permit persons to whom the Software is -furnished to do so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ - -#pragma once - -void send_data(uint8_t link, const uint8_t* data, uint16_t size); diff --git a/quantum/serial_link/protocol/transport.c b/quantum/serial_link/protocol/transport.c deleted file mode 100644 index 73b8dc62e9..0000000000 --- a/quantum/serial_link/protocol/transport.c +++ /dev/null @@ -1,121 +0,0 @@ -/* -The MIT License (MIT) - -Copyright (c) 2016 Fred Sundvik - -Permission is hereby granted, free of charge, to any person obtaining a copy -of this software and associated documentation files (the "Software"), to deal -in the Software without restriction, including without limitation the rights -to use, copy, modify, merge, publish, distribute, sublicense, and/or sell -copies of the Software, and to permit persons to whom the Software is -furnished to do so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ - -#include "serial_link/protocol/transport.h" -#include "serial_link/protocol/frame_router.h" -#include "serial_link/protocol/triple_buffered_object.h" -#include - -#define MAX_REMOTE_OBJECTS 16 -static remote_object_t* remote_objects[MAX_REMOTE_OBJECTS]; -static uint32_t num_remote_objects = 0; - -void reinitialize_serial_link_transport(void) { num_remote_objects = 0; } - -void add_remote_objects(remote_object_t** _remote_objects, uint32_t _num_remote_objects) { - unsigned int i; - for (i = 0; i < _num_remote_objects; i++) { - remote_object_t* obj = _remote_objects[i]; - remote_objects[num_remote_objects++] = obj; - if (obj->object_type == MASTER_TO_ALL_SLAVES) { - triple_buffer_object_t* tb = (triple_buffer_object_t*)obj->buffer; - triple_buffer_init(tb); - uint8_t* start = obj->buffer + LOCAL_OBJECT_SIZE(obj->object_size); - tb = (triple_buffer_object_t*)start; - triple_buffer_init(tb); - } else if (obj->object_type == MASTER_TO_SINGLE_SLAVE) { - uint8_t* start = obj->buffer; - unsigned int j; - for (j = 0; j < NUM_SLAVES; j++) { - triple_buffer_object_t* tb = (triple_buffer_object_t*)start; - triple_buffer_init(tb); - start += LOCAL_OBJECT_SIZE(obj->object_size); - } - triple_buffer_object_t* tb = (triple_buffer_object_t*)start; - triple_buffer_init(tb); - } else { - uint8_t* start = obj->buffer; - triple_buffer_object_t* tb = (triple_buffer_object_t*)start; - triple_buffer_init(tb); - start += LOCAL_OBJECT_SIZE(obj->object_size); - unsigned int j; - for (j = 0; j < NUM_SLAVES; j++) { - tb = (triple_buffer_object_t*)start; - triple_buffer_init(tb); - start += REMOTE_OBJECT_SIZE(obj->object_size); - } - } - } -} - -void transport_recv_frame(uint8_t from, uint8_t* data, uint16_t size) { - uint8_t id = data[size - 1]; - if (id < num_remote_objects) { - remote_object_t* obj = remote_objects[id]; - if (obj->object_size == size - 1) { - uint8_t* start; - if (obj->object_type == MASTER_TO_ALL_SLAVES) { - start = obj->buffer + LOCAL_OBJECT_SIZE(obj->object_size); - } else if (obj->object_type == SLAVE_TO_MASTER) { - start = obj->buffer + LOCAL_OBJECT_SIZE(obj->object_size); - start += (from - 1) * REMOTE_OBJECT_SIZE(obj->object_size); - } else { - start = obj->buffer + NUM_SLAVES * LOCAL_OBJECT_SIZE(obj->object_size); - } - triple_buffer_object_t* tb = (triple_buffer_object_t*)start; - void* ptr = triple_buffer_begin_write_internal(obj->object_size, tb); - memcpy(ptr, data, size - 1); - triple_buffer_end_write_internal(tb); - } - } -} - -void update_transport(void) { - unsigned int i; - for (i = 0; i < num_remote_objects; i++) { - remote_object_t* obj = remote_objects[i]; - if (obj->object_type == MASTER_TO_ALL_SLAVES || obj->object_type == SLAVE_TO_MASTER) { - triple_buffer_object_t* tb = (triple_buffer_object_t*)obj->buffer; - uint8_t* ptr = (uint8_t*)triple_buffer_read_internal(obj->object_size + LOCAL_OBJECT_EXTRA, tb); - if (ptr) { - ptr[obj->object_size] = i; - uint8_t dest = obj->object_type == MASTER_TO_ALL_SLAVES ? 0xFF : 0; - router_send_frame(dest, ptr, obj->object_size + 1); - } - } else { - uint8_t* start = obj->buffer; - unsigned int j; - for (j = 0; j < NUM_SLAVES; j++) { - triple_buffer_object_t* tb = (triple_buffer_object_t*)start; - uint8_t* ptr = (uint8_t*)triple_buffer_read_internal(obj->object_size + LOCAL_OBJECT_EXTRA, tb); - if (ptr) { - ptr[obj->object_size] = i; - uint8_t dest = j + 1; - router_send_frame(dest, ptr, obj->object_size + 1); - } - start += LOCAL_OBJECT_SIZE(obj->object_size); - } - } - } -} diff --git a/quantum/serial_link/protocol/transport.h b/quantum/serial_link/protocol/transport.h deleted file mode 100644 index 3ce0c9fe4e..0000000000 --- a/quantum/serial_link/protocol/transport.h +++ /dev/null @@ -1,139 +0,0 @@ -/* -The MIT License (MIT) - -Copyright (c) 2016 Fred Sundvik - -Permission is hereby granted, free of charge, to any person obtaining a copy -of this software and associated documentation files (the "Software"), to deal -in the Software without restriction, including without limitation the rights -to use, copy, modify, merge, publish, distribute, sublicense, and/or sell -copies of the Software, and to permit persons to whom the Software is -furnished to do so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ - -#pragma once - -#include "serial_link/protocol/triple_buffered_object.h" -#include "serial_link/system/serial_link.h" - -#define NUM_SLAVES 8 -#define LOCAL_OBJECT_EXTRA 16 - -// master -> slave = 1 local(target all), 1 remote object -// slave -> master = 1 local(target 0), multiple remote objects -// master -> single slave (multiple local, target id), 1 remote object -typedef enum { - MASTER_TO_ALL_SLAVES, - MASTER_TO_SINGLE_SLAVE, - SLAVE_TO_MASTER, -} remote_object_type; - -typedef struct { - remote_object_type object_type; - uint16_t object_size; - uint8_t buffer[] __attribute__((aligned(4))); -} remote_object_t; - -#define REMOTE_OBJECT_SIZE(objectsize) (sizeof(triple_buffer_object_t) + objectsize * 3) -#define LOCAL_OBJECT_SIZE(objectsize) (sizeof(triple_buffer_object_t) + (objectsize + LOCAL_OBJECT_EXTRA) * 3) - -#define REMOTE_OBJECT_HELPER(name, type, num_local, num_remote) \ - typedef struct { \ - remote_object_t object; \ - uint8_t buffer[num_remote * REMOTE_OBJECT_SIZE(sizeof(type)) + num_local * LOCAL_OBJECT_SIZE(sizeof(type))]; \ - } remote_object_##name##_t; - -#define MASTER_TO_ALL_SLAVES_OBJECT(name, type) \ - REMOTE_OBJECT_HELPER(name, type, 1, 1) \ - remote_object_##name##_t remote_object_##name = {.object = { \ - .object_type = MASTER_TO_ALL_SLAVES, \ - .object_size = sizeof(type), \ - }}; \ - type* begin_write_##name(void) { \ - remote_object_t* obj = (remote_object_t*)&remote_object_##name; \ - triple_buffer_object_t* tb = (triple_buffer_object_t*)obj->buffer; \ - return (type*)triple_buffer_begin_write_internal(sizeof(type) + LOCAL_OBJECT_EXTRA, tb); \ - } \ - void end_write_##name(void) { \ - remote_object_t* obj = (remote_object_t*)&remote_object_##name; \ - triple_buffer_object_t* tb = (triple_buffer_object_t*)obj->buffer; \ - triple_buffer_end_write_internal(tb); \ - signal_data_written(); \ - } \ - type* read_##name(void) { \ - remote_object_t* obj = (remote_object_t*)&remote_object_##name; \ - uint8_t* start = obj->buffer + LOCAL_OBJECT_SIZE(obj->object_size); \ - triple_buffer_object_t* tb = (triple_buffer_object_t*)start; \ - return (type*)triple_buffer_read_internal(obj->object_size, tb); \ - } - -#define MASTER_TO_SINGLE_SLAVE_OBJECT(name, type) \ - REMOTE_OBJECT_HELPER(name, type, NUM_SLAVES, 1) \ - remote_object_##name##_t remote_object_##name = {.object = { \ - .object_type = MASTER_TO_SINGLE_SLAVE, \ - .object_size = sizeof(type), \ - }}; \ - type* begin_write_##name(uint8_t slave) { \ - remote_object_t* obj = (remote_object_t*)&remote_object_##name; \ - uint8_t* start = obj->buffer; \ - start += slave * LOCAL_OBJECT_SIZE(obj->object_size); \ - triple_buffer_object_t* tb = (triple_buffer_object_t*)start; \ - return (type*)triple_buffer_begin_write_internal(sizeof(type) + LOCAL_OBJECT_EXTRA, tb); \ - } \ - void end_write_##name(uint8_t slave) { \ - remote_object_t* obj = (remote_object_t*)&remote_object_##name; \ - uint8_t* start = obj->buffer; \ - start += slave * LOCAL_OBJECT_SIZE(obj->object_size); \ - triple_buffer_object_t* tb = (triple_buffer_object_t*)start; \ - triple_buffer_end_write_internal(tb); \ - signal_data_written(); \ - } \ - type* read_##name() { \ - remote_object_t* obj = (remote_object_t*)&remote_object_##name; \ - uint8_t* start = obj->buffer + NUM_SLAVES * LOCAL_OBJECT_SIZE(obj->object_size); \ - triple_buffer_object_t* tb = (triple_buffer_object_t*)start; \ - return (type*)triple_buffer_read_internal(obj->object_size, tb); \ - } - -#define SLAVE_TO_MASTER_OBJECT(name, type) \ - REMOTE_OBJECT_HELPER(name, type, 1, NUM_SLAVES) \ - remote_object_##name##_t remote_object_##name = {.object = { \ - .object_type = SLAVE_TO_MASTER, \ - .object_size = sizeof(type), \ - }}; \ - type* begin_write_##name(void) { \ - remote_object_t* obj = (remote_object_t*)&remote_object_##name; \ - triple_buffer_object_t* tb = (triple_buffer_object_t*)obj->buffer; \ - return (type*)triple_buffer_begin_write_internal(sizeof(type) + LOCAL_OBJECT_EXTRA, tb); \ - } \ - void end_write_##name(void) { \ - remote_object_t* obj = (remote_object_t*)&remote_object_##name; \ - triple_buffer_object_t* tb = (triple_buffer_object_t*)obj->buffer; \ - triple_buffer_end_write_internal(tb); \ - signal_data_written(); \ - } \ - type* read_##name(uint8_t slave) { \ - remote_object_t* obj = (remote_object_t*)&remote_object_##name; \ - uint8_t* start = obj->buffer + LOCAL_OBJECT_SIZE(obj->object_size); \ - start += slave * REMOTE_OBJECT_SIZE(obj->object_size); \ - triple_buffer_object_t* tb = (triple_buffer_object_t*)start; \ - return (type*)triple_buffer_read_internal(obj->object_size, tb); \ - } - -#define REMOTE_OBJECT(name) (remote_object_t*)&remote_object_##name - -void add_remote_objects(remote_object_t** remote_objects, uint32_t num_remote_objects); -void reinitialize_serial_link_transport(void); -void transport_recv_frame(uint8_t from, uint8_t* data, uint16_t size); -void update_transport(void); diff --git a/quantum/serial_link/protocol/triple_buffered_object.c b/quantum/serial_link/protocol/triple_buffered_object.c deleted file mode 100644 index e0c6d702a5..0000000000 --- a/quantum/serial_link/protocol/triple_buffered_object.c +++ /dev/null @@ -1,77 +0,0 @@ -/* -The MIT License (MIT) - -Copyright (c) 2016 Fred Sundvik - -Permission is hereby granted, free of charge, to any person obtaining a copy -of this software and associated documentation files (the "Software"), to deal -in the Software without restriction, including without limitation the rights -to use, copy, modify, merge, publish, distribute, sublicense, and/or sell -copies of the Software, and to permit persons to whom the Software is -furnished to do so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ - -#include "serial_link/protocol/triple_buffered_object.h" -#include "serial_link/system/serial_link.h" -#include -#include - -#define GET_READ_INDEX() object->state & 3 -#define GET_WRITE_INDEX() (object->state >> 2) & 3 -#define GET_SHARED_INDEX() (object->state >> 4) & 3 -#define GET_DATA_AVAILABLE() (object->state >> 6) & 1 - -#define SET_READ_INDEX(i) object->state = ((object->state & ~3) | i) -#define SET_WRITE_INDEX(i) object->state = ((object->state & ~(3 << 2)) | (i << 2)) -#define SET_SHARED_INDEX(i) object->state = ((object->state & ~(3 << 4)) | (i << 4)) -#define SET_DATA_AVAILABLE(i) object->state = ((object->state & ~(1 << 6)) | (i << 6)) - -void triple_buffer_init(triple_buffer_object_t* object) { - object->state = 0; - SET_WRITE_INDEX(0); - SET_READ_INDEX(1); - SET_SHARED_INDEX(2); - SET_DATA_AVAILABLE(0); -} - -void* triple_buffer_read_internal(uint16_t object_size, triple_buffer_object_t* object) { - serial_link_lock(); - if (GET_DATA_AVAILABLE()) { - uint8_t shared_index = GET_SHARED_INDEX(); - uint8_t read_index = GET_READ_INDEX(); - SET_READ_INDEX(shared_index); - SET_SHARED_INDEX(read_index); - SET_DATA_AVAILABLE(false); - serial_link_unlock(); - return object->buffer + object_size * shared_index; - } else { - serial_link_unlock(); - return NULL; - } -} - -void* triple_buffer_begin_write_internal(uint16_t object_size, triple_buffer_object_t* object) { - uint8_t write_index = GET_WRITE_INDEX(); - return object->buffer + object_size * write_index; -} - -void triple_buffer_end_write_internal(triple_buffer_object_t* object) { - serial_link_lock(); - uint8_t shared_index = GET_SHARED_INDEX(); - uint8_t write_index = GET_WRITE_INDEX(); - SET_SHARED_INDEX(write_index); - SET_WRITE_INDEX(shared_index); - SET_DATA_AVAILABLE(true); - serial_link_unlock(); -} diff --git a/quantum/serial_link/protocol/triple_buffered_object.h b/quantum/serial_link/protocol/triple_buffered_object.h deleted file mode 100644 index 717d6d7b8b..0000000000 --- a/quantum/serial_link/protocol/triple_buffered_object.h +++ /dev/null @@ -1,44 +0,0 @@ -/* -The MIT License (MIT) - -Copyright (c) 2016 Fred Sundvik - -Permission is hereby granted, free of charge, to any person obtaining a copy -of this software and associated documentation files (the "Software"), to deal -in the Software without restriction, including without limitation the rights -to use, copy, modify, merge, publish, distribute, sublicense, and/or sell -copies of the Software, and to permit persons to whom the Software is -furnished to do so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ - -#pragma once - -#include - -typedef struct { - uint8_t state; - uint8_t buffer[] __attribute__((aligned(4))); -} triple_buffer_object_t; - -void triple_buffer_init(triple_buffer_object_t* object); - -#define triple_buffer_begin_write(object) (typeof(*object.buffer[0])*)triple_buffer_begin_write_internal(sizeof(*object.buffer[0]), (triple_buffer_object_t*)object) - -#define triple_buffer_end_write(object) triple_buffer_end_write_internal((triple_buffer_object_t*)object) - -#define triple_buffer_read(object) (typeof(*object.buffer[0])*)triple_buffer_read_internal(sizeof(*object.buffer[0]), (triple_buffer_object_t*)object) - -void* triple_buffer_begin_write_internal(uint16_t object_size, triple_buffer_object_t* object); -void triple_buffer_end_write_internal(triple_buffer_object_t* object); -void* triple_buffer_read_internal(uint16_t object_size, triple_buffer_object_t* object); diff --git a/quantum/serial_link/system/serial_link.c b/quantum/serial_link/system/serial_link.c deleted file mode 100644 index 6363f8ff3b..0000000000 --- a/quantum/serial_link/system/serial_link.c +++ /dev/null @@ -1,250 +0,0 @@ -/* -The MIT License (MIT) - -Copyright (c) 2016 Fred Sundvik - -Permission is hereby granted, free of charge, to any person obtaining a copy -of this software and associated documentation files (the "Software"), to deal -in the Software without restriction, including without limitation the rights -to use, copy, modify, merge, publish, distribute, sublicense, and/or sell -copies of the Software, and to permit persons to whom the Software is -furnished to do so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ -#include "report.h" -#include "host_driver.h" -#include "serial_link/system/serial_link.h" -#include -#include "serial_link/protocol/byte_stuffer.h" -#include "serial_link/protocol/transport.h" -#include "serial_link/protocol/frame_router.h" -#include "matrix.h" -#include "sync_timer.h" -#include -#include "print.h" -#include "config.h" - -#define SYNC_TIMER_OFFSET 2 - -static event_source_t new_data_event; -static bool serial_link_connected; -static bool is_master = false; - -static uint8_t keyboard_leds(void); -static void send_keyboard(report_keyboard_t* report); -static void send_mouse(report_mouse_t* report); -static void send_system(uint16_t data); -static void send_consumer(uint16_t data); - -host_driver_t serial_driver = {keyboard_leds, send_keyboard, send_mouse, send_system, send_consumer}; - -// Define these in your Config.h file -#ifndef SERIAL_LINK_BAUD -# error "Serial link baud is not set" -#endif - -#ifndef SERIAL_LINK_THREAD_PRIORITY -# error "Serial link thread priority not set" -#endif - -static SerialConfig config = {.sc_speed = SERIAL_LINK_BAUD}; - -//#define DEBUG_LINK_ERRORS - -static uint32_t read_from_serial(SerialDriver* driver, uint8_t link) { - const uint32_t buffer_size = 16; - uint8_t buffer[buffer_size]; - uint32_t bytes_read = sdAsynchronousRead(driver, buffer, buffer_size); - uint8_t* current = buffer; - uint8_t* end = current + bytes_read; - while (current < end) { - byte_stuffer_recv_byte(link, *current); - current++; - } - return bytes_read; -} - -static void print_error(char* str, eventflags_t flags, SerialDriver* driver) { -#ifdef DEBUG_LINK_ERRORS - if (flags & SD_PARITY_ERROR) { - print(str); - print(" Parity error\n"); - } - if (flags & SD_FRAMING_ERROR) { - print(str); - print(" Framing error\n"); - } - if (flags & SD_OVERRUN_ERROR) { - print(str); - uint32_t size = qSpaceI(&(driver->iqueue)); - xprintf(" Overrun error, queue size %d\n", size); - } - if (flags & SD_NOISE_ERROR) { - print(str); - print(" Noise error\n"); - } - if (flags & SD_BREAK_DETECTED) { - print(str); - print(" Break detected\n"); - } -#else - (void)str; - (void)flags; - (void)driver; -#endif -} - -bool is_serial_link_master(void) { return is_master; } - -// TODO: Optimize the stack size, this is probably way too big -static THD_WORKING_AREA(serialThreadStack, 1024); -static THD_FUNCTION(serialThread, arg) { - (void)arg; - event_listener_t new_data_listener; - event_listener_t sd1_listener; - event_listener_t sd2_listener; - chEvtRegister(&new_data_event, &new_data_listener, 0); - eventflags_t events = CHN_INPUT_AVAILABLE | SD_PARITY_ERROR | SD_FRAMING_ERROR | SD_OVERRUN_ERROR | SD_NOISE_ERROR | SD_BREAK_DETECTED; - chEvtRegisterMaskWithFlags(chnGetEventSource(&SD1), &sd1_listener, EVENT_MASK(1), events); - chEvtRegisterMaskWithFlags(chnGetEventSource(&SD2), &sd2_listener, EVENT_MASK(2), events); - bool need_wait = false; - while (true) { - eventflags_t flags1 = 0; - eventflags_t flags2 = 0; - if (need_wait) { - eventmask_t mask = chEvtWaitAnyTimeout(ALL_EVENTS, TIME_MS2I(1000)); - if (mask & EVENT_MASK(1)) { - flags1 = chEvtGetAndClearFlags(&sd1_listener); - print_error("DOWNLINK", flags1, &SD1); - } - if (mask & EVENT_MASK(2)) { - flags2 = chEvtGetAndClearFlags(&sd2_listener); - print_error("UPLINK", flags2, &SD2); - } - } - - // Always stay as master, even if the USB goes into sleep mode - is_master |= usbGetDriverStateI(&USBD1) == USB_ACTIVE; - router_set_master(is_master); - - need_wait = true; - need_wait &= read_from_serial(&SD2, UP_LINK) == 0; - need_wait &= read_from_serial(&SD1, DOWN_LINK) == 0; - update_transport(); - } -} - -void send_data(uint8_t link, const uint8_t* data, uint16_t size) { - if (link == DOWN_LINK) { - sdWrite(&SD1, data, size); - } else { - sdWrite(&SD2, data, size); - } -} - -static systime_t last_update = 0; - -typedef struct { - matrix_row_t rows[MATRIX_ROWS]; -} matrix_object_t; - -static matrix_object_t last_matrix = {}; - -SLAVE_TO_MASTER_OBJECT(keyboard_matrix, matrix_object_t); -MASTER_TO_ALL_SLAVES_OBJECT(serial_link_connected, bool); -#ifndef DISABLE_SYNC_TIMER -MASTER_TO_ALL_SLAVES_OBJECT(sync_timer, uint32_t); -#endif - -static remote_object_t* remote_objects[] = { - REMOTE_OBJECT(serial_link_connected), - REMOTE_OBJECT(keyboard_matrix), -#ifndef DISABLE_SYNC_TIMER - REMOTE_OBJECT(sync_timer), -#endif -}; - -void init_serial_link(void) { - serial_link_connected = false; - init_serial_link_hal(); - add_remote_objects(remote_objects, sizeof(remote_objects) / sizeof(remote_object_t*)); - init_byte_stuffer(); - sdStart(&SD1, &config); - sdStart(&SD2, &config); - chEvtObjectInit(&new_data_event); - (void)chThdCreateStatic(serialThreadStack, sizeof(serialThreadStack), SERIAL_LINK_THREAD_PRIORITY, serialThread, NULL); -} - -void matrix_set_remote(matrix_row_t* rows, uint8_t index); - -void serial_link_update(void) { - if (read_serial_link_connected()) { - serial_link_connected = true; - } - - matrix_object_t matrix; - bool changed = false; - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix.rows[i] = matrix_get_row(i); - changed |= matrix.rows[i] != last_matrix.rows[i]; - } - - systime_t current_time = chVTGetSystemTimeX(); - systime_t delta = current_time - last_update; - if (changed || delta > TIME_US2I(5000)) { - last_update = current_time; - last_matrix = matrix; - matrix_object_t* m = begin_write_keyboard_matrix(); - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - m->rows[i] = matrix.rows[i]; - } - end_write_keyboard_matrix(); - - *begin_write_serial_link_connected() = true; - end_write_serial_link_connected(); - -#ifndef DISABLE_SYNC_TIMER - *begin_write_sync_timer() = sync_timer_read32() + SYNC_TIMER_OFFSET; - end_write_sync_timer(); -#endif - } - - matrix_object_t* m = read_keyboard_matrix(0); - if (m) { - matrix_set_remote(m->rows, 0); - } - -#ifndef DISABLE_SYNC_TIMER - uint32_t* t = read_sync_timer(); - if (t) { - sync_timer_update(*t); - } -#endif -} - -void signal_data_written(void) { chEvtBroadcast(&new_data_event); } - -bool is_serial_link_connected(void) { return serial_link_connected; } - -host_driver_t* get_serial_link_driver(void) { return &serial_driver; } - -// NOTE: The driver does nothing, because the master handles everything -uint8_t keyboard_leds(void) { return 0; } - -void send_keyboard(report_keyboard_t* report) { (void)report; } - -void send_mouse(report_mouse_t* report) { (void)report; } - -void send_system(uint16_t data) { (void)data; } - -void send_consumer(uint16_t data) { (void)data; } diff --git a/quantum/serial_link/system/serial_link.h b/quantum/serial_link/system/serial_link.h deleted file mode 100644 index adc1f6e93d..0000000000 --- a/quantum/serial_link/system/serial_link.h +++ /dev/null @@ -1,54 +0,0 @@ -/* -The MIT License (MIT) - -Copyright (c) 2016 Fred Sundvik - -Permission is hereby granted, free of charge, to any person obtaining a copy -of this software and associated documentation files (the "Software"), to deal -in the Software without restriction, including without limitation the rights -to use, copy, modify, merge, publish, distribute, sublicense, and/or sell -copies of the Software, and to permit persons to whom the Software is -furnished to do so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ - -#pragma once - -#include "host_driver.h" -#include - -void init_serial_link(void); -void init_serial_link_hal(void); -bool is_serial_link_connected(void); -bool is_serial_link_master(void); -host_driver_t* get_serial_link_driver(void); -void serial_link_update(void); - -#if defined(PROTOCOL_CHIBIOS) -# include - -static inline void serial_link_lock(void) { chSysLock(); } - -static inline void serial_link_unlock(void) { chSysUnlock(); } - -void signal_data_written(void); - -#else - -inline void serial_link_lock(void) {} - -inline void serial_link_unlock(void) {} - -void signal_data_written(void); - -#endif diff --git a/quantum/serial_link/tests/Makefile b/quantum/serial_link/tests/Makefile deleted file mode 100644 index 11dd355b22..0000000000 --- a/quantum/serial_link/tests/Makefile +++ /dev/null @@ -1,61 +0,0 @@ -# The MIT License (MIT) -# -# Copyright (c) 2016 Fred Sundvik -# -# Permission is hereby granted, free of charge, to any person obtaining a copy -# of this software and associated documentation files (the "Software"), to deal -# in the Software without restriction, including without limitation the rights -# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell -# copies of the Software, and to permit persons to whom the Software is -# furnished to do so, subject to the following conditions: -# -# The above copyright notice and this permission notice shall be included in all -# copies or substantial portions of the Software. -# -# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -# SOFTWARE. - -CC = gcc -CFLAGS = -INCLUDES = -I. -I../../ -LDFLAGS = -L$(BUILDDIR)/cgreen/build-c/src -shared -LDLIBS = -lcgreen -UNITOBJ = $(BUILDDIR)/serialtest/unitobj -DEPDIR = $(BUILDDIR)/serialtest/unit.d -UNITTESTS = $(BUILDDIR)/serialtest/unittests -DEPFLAGS = -MT $@ -MMD -MP -MF $(DEPDIR)/$*.Td -EXT = .so -UNAME := $(shell uname) -ifneq (, $(findstring MINGW, $(UNAME))) - EXT = .dll -endif -ifneq (, $(findstring CYGWIN, $(UNAME))) - EXT = .dll -endif - -SRC = $(wildcard *.c) -TESTFILES = $(patsubst %.c, $(UNITTESTS)/%$(EXT), $(SRC)) -$(shell mkdir -p $(DEPDIR) >/dev/null) - -test: $(TESTFILES) - @$(BUILDDIR)/cgreen/build-c/tools/cgreen-runner --color $(TESTFILES) - -$(UNITTESTS)/%$(EXT): $(UNITOBJ)/%.o - @mkdir -p $(UNITTESTS) - $(CC) $(LDFLAGS) -o $@ $^ $(LDLIBS) - -$(UNITOBJ)/%.o : %.c -$(UNITOBJ)/%.o: %.c $(DEPDIR)/%.d - @mkdir -p $(UNITOBJ) - $(CC) $(CFLAGS) $(DEPFLAGS) $(INCLUDES) -c $< -o $@ - @mv -f $(DEPDIR)/$*.Td $(DEPDIR)/$*.d - -$(DEPDIR)/%.d: ; -.PRECIOUS: $(DEPDIR)/%.d - --include $(patsubst %,$(DEPDIR)/%.d,$(basename $(SRC))) diff --git a/quantum/serial_link/tests/byte_stuffer_tests.cpp b/quantum/serial_link/tests/byte_stuffer_tests.cpp deleted file mode 100644 index 9e4e1768f4..0000000000 --- a/quantum/serial_link/tests/byte_stuffer_tests.cpp +++ /dev/null @@ -1,450 +0,0 @@ -/* -The MIT License (MIT) - -Copyright (c) 2016 Fred Sundvik - -Permission is hereby granted, free of charge, to any person obtaining a copy -of this software and associated documentation files (the "Software"), to deal -in the Software without restriction, including without limitation the rights -to use, copy, modify, merge, publish, distribute, sublicense, and/or sell -copies of the Software, and to permit persons to whom the Software is -furnished to do so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ - -#include "gtest/gtest.h" -#include "gmock/gmock.h" -#include -#include -extern "C" { -#include "serial_link/protocol/byte_stuffer.h" -#include "serial_link/protocol/frame_validator.h" -#include "serial_link/protocol/physical.h" -} - -using testing::_; -using testing::Args; -using testing::ElementsAreArray; - -class ByteStuffer : public ::testing::Test { - public: - ByteStuffer() { - Instance = this; - init_byte_stuffer(); - } - - ~ByteStuffer() { Instance = nullptr; } - - MOCK_METHOD3(validator_recv_frame, void(uint8_t link, uint8_t* data, uint16_t size)); - - void send_data(uint8_t link, const uint8_t* data, uint16_t size) { std::copy(data, data + size, std::back_inserter(sent_data)); } - std::vector sent_data; - - static ByteStuffer* Instance; -}; - -ByteStuffer* ByteStuffer::Instance = nullptr; - -extern "C" { -void validator_recv_frame(uint8_t link, uint8_t* data, uint16_t size) { ByteStuffer::Instance->validator_recv_frame(link, data, size); } - -void send_data(uint8_t link, const uint8_t* data, uint16_t size) { ByteStuffer::Instance->send_data(link, data, size); } -} - -TEST_F(ByteStuffer, receives_no_frame_for_a_single_zero_byte) { - EXPECT_CALL(*this, validator_recv_frame(_, _, _)).Times(0); - byte_stuffer_recv_byte(0, 0); -} - -TEST_F(ByteStuffer, receives_no_frame_for_a_single_FF_byte) { - EXPECT_CALL(*this, validator_recv_frame(_, _, _)).Times(0); - byte_stuffer_recv_byte(0, 0xFF); -} - -TEST_F(ByteStuffer, receives_no_frame_for_a_single_random_byte) { - EXPECT_CALL(*this, validator_recv_frame(_, _, _)).Times(0); - byte_stuffer_recv_byte(0, 0x4A); -} - -TEST_F(ByteStuffer, receives_no_frame_for_a_zero_length_frame) { - EXPECT_CALL(*this, validator_recv_frame(_, _, _)).Times(0); - byte_stuffer_recv_byte(0, 1); - byte_stuffer_recv_byte(0, 0); -} - -TEST_F(ByteStuffer, receives_single_byte_valid_frame) { - uint8_t expected[] = {0x37}; - EXPECT_CALL(*this, validator_recv_frame(_, _, _)).With(Args<1, 2>(ElementsAreArray(expected))); - byte_stuffer_recv_byte(0, 2); - byte_stuffer_recv_byte(0, 0x37); - byte_stuffer_recv_byte(0, 0); -} -TEST_F(ByteStuffer, receives_three_bytes_valid_frame) { - uint8_t expected[] = {0x37, 0x99, 0xFF}; - EXPECT_CALL(*this, validator_recv_frame(_, _, _)).With(Args<1, 2>(ElementsAreArray(expected))); - byte_stuffer_recv_byte(0, 4); - byte_stuffer_recv_byte(0, 0x37); - byte_stuffer_recv_byte(0, 0x99); - byte_stuffer_recv_byte(0, 0xFF); - byte_stuffer_recv_byte(0, 0); -} - -TEST_F(ByteStuffer, receives_single_zero_valid_frame) { - uint8_t expected[] = {0}; - EXPECT_CALL(*this, validator_recv_frame(_, _, _)).With(Args<1, 2>(ElementsAreArray(expected))); - byte_stuffer_recv_byte(0, 1); - byte_stuffer_recv_byte(0, 1); - byte_stuffer_recv_byte(0, 0); -} - -TEST_F(ByteStuffer, receives_valid_frame_with_zeroes) { - uint8_t expected[] = {5, 0, 3, 0}; - EXPECT_CALL(*this, validator_recv_frame(_, _, _)).With(Args<1, 2>(ElementsAreArray(expected))); - byte_stuffer_recv_byte(0, 2); - byte_stuffer_recv_byte(0, 5); - byte_stuffer_recv_byte(0, 2); - byte_stuffer_recv_byte(0, 3); - byte_stuffer_recv_byte(0, 1); - byte_stuffer_recv_byte(0, 0); -} - -TEST_F(ByteStuffer, receives_two_valid_frames) { - uint8_t expected1[] = {5, 0}; - uint8_t expected2[] = {3}; - EXPECT_CALL(*this, validator_recv_frame(_, _, _)).With(Args<1, 2>(ElementsAreArray(expected1))); - EXPECT_CALL(*this, validator_recv_frame(_, _, _)).With(Args<1, 2>(ElementsAreArray(expected2))); - byte_stuffer_recv_byte(1, 2); - byte_stuffer_recv_byte(1, 5); - byte_stuffer_recv_byte(1, 1); - byte_stuffer_recv_byte(1, 0); - byte_stuffer_recv_byte(1, 2); - byte_stuffer_recv_byte(1, 3); - byte_stuffer_recv_byte(1, 0); -} - -TEST_F(ByteStuffer, receives_valid_frame_after_unexpected_zero) { - uint8_t expected[] = {5, 7}; - EXPECT_CALL(*this, validator_recv_frame(_, _, _)).With(Args<1, 2>(ElementsAreArray(expected))); - byte_stuffer_recv_byte(1, 3); - byte_stuffer_recv_byte(1, 1); - byte_stuffer_recv_byte(1, 0); - byte_stuffer_recv_byte(1, 3); - byte_stuffer_recv_byte(1, 5); - byte_stuffer_recv_byte(1, 7); - byte_stuffer_recv_byte(1, 0); -} - -TEST_F(ByteStuffer, receives_valid_frame_after_unexpected_non_zero) { - uint8_t expected[] = {5, 7}; - EXPECT_CALL(*this, validator_recv_frame(_, _, _)).With(Args<1, 2>(ElementsAreArray(expected))); - byte_stuffer_recv_byte(0, 2); - byte_stuffer_recv_byte(0, 9); - byte_stuffer_recv_byte(0, 4); // This should have been zero - byte_stuffer_recv_byte(0, 0); - byte_stuffer_recv_byte(0, 3); - byte_stuffer_recv_byte(0, 5); - byte_stuffer_recv_byte(0, 7); - byte_stuffer_recv_byte(0, 0); -} - -TEST_F(ByteStuffer, receives_a_valid_frame_with_over254_non_zeroes_and_then_end_of_frame) { - uint8_t expected[254]; - int i; - for (i = 0; i < 254; i++) { - expected[i] = i + 1; - } - EXPECT_CALL(*this, validator_recv_frame(_, _, _)).With(Args<1, 2>(ElementsAreArray(expected))); - byte_stuffer_recv_byte(0, 0xFF); - for (i = 0; i < 254; i++) { - byte_stuffer_recv_byte(0, i + 1); - } - byte_stuffer_recv_byte(0, 0); -} - -TEST_F(ByteStuffer, receives_a_valid_frame_with_over254_non_zeroes_next_byte_is_non_zero) { - uint8_t expected[255]; - int i; - for (i = 0; i < 254; i++) { - expected[i] = i + 1; - } - expected[254] = 7; - EXPECT_CALL(*this, validator_recv_frame(_, _, _)).With(Args<1, 2>(ElementsAreArray(expected))); - byte_stuffer_recv_byte(0, 0xFF); - for (i = 0; i < 254; i++) { - byte_stuffer_recv_byte(0, i + 1); - } - byte_stuffer_recv_byte(0, 2); - byte_stuffer_recv_byte(0, 7); - byte_stuffer_recv_byte(0, 0); -} - -TEST_F(ByteStuffer, receives_a_valid_frame_with_over254_non_zeroes_next_byte_is_zero) { - uint8_t expected[255]; - int i; - for (i = 0; i < 254; i++) { - expected[i] = i + 1; - } - expected[254] = 0; - EXPECT_CALL(*this, validator_recv_frame(_, _, _)).With(Args<1, 2>(ElementsAreArray(expected))); - byte_stuffer_recv_byte(0, 0xFF); - for (i = 0; i < 254; i++) { - byte_stuffer_recv_byte(0, i + 1); - } - byte_stuffer_recv_byte(0, 1); - byte_stuffer_recv_byte(0, 1); - byte_stuffer_recv_byte(0, 0); -} - -TEST_F(ByteStuffer, receives_two_long_frames_and_some_more) { - uint8_t expected[515]; - int i; - int j; - for (j = 0; j < 2; j++) { - for (i = 0; i < 254; i++) { - expected[i + 254 * j] = i + 1; - } - } - for (i = 0; i < 7; i++) { - expected[254 * 2 + i] = i + 1; - } - EXPECT_CALL(*this, validator_recv_frame(_, _, _)).With(Args<1, 2>(ElementsAreArray(expected))); - byte_stuffer_recv_byte(0, 0xFF); - for (i = 0; i < 254; i++) { - byte_stuffer_recv_byte(0, i + 1); - } - byte_stuffer_recv_byte(0, 0xFF); - for (i = 0; i < 254; i++) { - byte_stuffer_recv_byte(0, i + 1); - } - byte_stuffer_recv_byte(0, 8); - byte_stuffer_recv_byte(0, 1); - byte_stuffer_recv_byte(0, 2); - byte_stuffer_recv_byte(0, 3); - byte_stuffer_recv_byte(0, 4); - byte_stuffer_recv_byte(0, 5); - byte_stuffer_recv_byte(0, 6); - byte_stuffer_recv_byte(0, 7); - byte_stuffer_recv_byte(0, 0); -} - -TEST_F(ByteStuffer, receives_an_all_zeros_frame_that_is_maximum_size) { - uint8_t expected[MAX_FRAME_SIZE] = {}; - EXPECT_CALL(*this, validator_recv_frame(_, _, _)).With(Args<1, 2>(ElementsAreArray(expected))); - int i; - byte_stuffer_recv_byte(0, 1); - for (i = 0; i < MAX_FRAME_SIZE; i++) { - byte_stuffer_recv_byte(0, 1); - } - byte_stuffer_recv_byte(0, 0); -} - -TEST_F(ByteStuffer, doesnt_recv_a_frame_thats_too_long_all_zeroes) { - uint8_t expected[1] = {0}; - EXPECT_CALL(*this, validator_recv_frame(_, _, _)).Times(0); - int i; - byte_stuffer_recv_byte(0, 1); - for (i = 0; i < MAX_FRAME_SIZE; i++) { - byte_stuffer_recv_byte(0, 1); - } - byte_stuffer_recv_byte(0, 1); - byte_stuffer_recv_byte(0, 0); -} - -TEST_F(ByteStuffer, received_frame_is_aborted_when_its_too_long) { - uint8_t expected[1] = {1}; - EXPECT_CALL(*this, validator_recv_frame(_, _, _)).With(Args<1, 2>(ElementsAreArray(expected))); - int i; - byte_stuffer_recv_byte(0, 1); - for (i = 0; i < MAX_FRAME_SIZE; i++) { - byte_stuffer_recv_byte(0, 1); - } - byte_stuffer_recv_byte(0, 2); - byte_stuffer_recv_byte(0, 1); - byte_stuffer_recv_byte(0, 0); -} - -TEST_F(ByteStuffer, does_nothing_when_sending_zero_size_frame) { - EXPECT_EQ(sent_data.size(), 0); - byte_stuffer_send_frame(0, NULL, 0); -} - -TEST_F(ByteStuffer, send_one_byte_frame) { - uint8_t data[] = {5}; - byte_stuffer_send_frame(1, data, 1); - uint8_t expected[] = {2, 5, 0}; - EXPECT_THAT(sent_data, ElementsAreArray(expected)); -} - -TEST_F(ByteStuffer, sends_two_byte_frame) { - uint8_t data[] = {5, 0x77}; - byte_stuffer_send_frame(0, data, 2); - uint8_t expected[] = {3, 5, 0x77, 0}; - EXPECT_THAT(sent_data, ElementsAreArray(expected)); -} - -TEST_F(ByteStuffer, sends_one_byte_frame_with_zero) { - uint8_t data[] = {0}; - byte_stuffer_send_frame(0, data, 1); - uint8_t expected[] = {1, 1, 0}; - EXPECT_THAT(sent_data, ElementsAreArray(expected)); -} - -TEST_F(ByteStuffer, sends_two_byte_frame_starting_with_zero) { - uint8_t data[] = {0, 9}; - byte_stuffer_send_frame(1, data, 2); - uint8_t expected[] = {1, 2, 9, 0}; - EXPECT_THAT(sent_data, ElementsAreArray(expected)); -} - -TEST_F(ByteStuffer, sends_two_byte_frame_starting_with_non_zero) { - uint8_t data[] = {9, 0}; - byte_stuffer_send_frame(1, data, 2); - uint8_t expected[] = {2, 9, 1, 0}; - EXPECT_THAT(sent_data, ElementsAreArray(expected)); -} - -TEST_F(ByteStuffer, sends_three_byte_frame_zero_in_the_middle) { - uint8_t data[] = {9, 0, 0x68}; - byte_stuffer_send_frame(0, data, 3); - uint8_t expected[] = {2, 9, 2, 0x68, 0}; - EXPECT_THAT(sent_data, ElementsAreArray(expected)); -} - -TEST_F(ByteStuffer, sends_three_byte_frame_data_in_the_middle) { - uint8_t data[] = {0, 0x55, 0}; - byte_stuffer_send_frame(0, data, 3); - uint8_t expected[] = {1, 2, 0x55, 1, 0}; - EXPECT_THAT(sent_data, ElementsAreArray(expected)); -} - -TEST_F(ByteStuffer, sends_three_byte_frame_with_all_zeroes) { - uint8_t data[] = {0, 0, 0}; - byte_stuffer_send_frame(0, data, 3); - uint8_t expected[] = {1, 1, 1, 1, 0}; - EXPECT_THAT(sent_data, ElementsAreArray(expected)); -} - -TEST_F(ByteStuffer, sends_frame_with_254_non_zeroes) { - uint8_t data[254]; - int i; - for (i = 0; i < 254; i++) { - data[i] = i + 1; - } - byte_stuffer_send_frame(0, data, 254); - uint8_t expected[256]; - expected[0] = 0xFF; - for (i = 1; i < 255; i++) { - expected[i] = i; - } - expected[255] = 0; - EXPECT_THAT(sent_data, ElementsAreArray(expected)); -} - -TEST_F(ByteStuffer, sends_frame_with_255_non_zeroes) { - uint8_t data[255]; - int i; - for (i = 0; i < 255; i++) { - data[i] = i + 1; - } - byte_stuffer_send_frame(0, data, 255); - uint8_t expected[258]; - expected[0] = 0xFF; - for (i = 1; i < 255; i++) { - expected[i] = i; - } - expected[255] = 2; - expected[256] = 255; - expected[257] = 0; - EXPECT_THAT(sent_data, ElementsAreArray(expected)); -} - -TEST_F(ByteStuffer, sends_frame_with_254_non_zeroes_followed_by_zero) { - uint8_t data[255]; - int i; - for (i = 0; i < 254; i++) { - data[i] = i + 1; - } - data[254] = 0; - byte_stuffer_send_frame(0, data, 255); - uint8_t expected[258]; - expected[0] = 0xFF; - for (i = 1; i < 255; i++) { - expected[i] = i; - } - expected[255] = 1; - expected[256] = 1; - expected[257] = 0; - EXPECT_THAT(sent_data, ElementsAreArray(expected)); -} - -TEST_F(ByteStuffer, sends_and_receives_full_roundtrip_small_packet) { - uint8_t original_data[] = {1, 2, 3}; - byte_stuffer_send_frame(0, original_data, sizeof(original_data)); - EXPECT_CALL(*this, validator_recv_frame(_, _, _)).With(Args<1, 2>(ElementsAreArray(original_data))); - int i; - for (auto& d : sent_data) { - byte_stuffer_recv_byte(1, d); - } -} - -TEST_F(ByteStuffer, sends_and_receives_full_roundtrip_small_packet_with_zeros) { - uint8_t original_data[] = {1, 0, 3, 0, 0, 9}; - byte_stuffer_send_frame(1, original_data, sizeof(original_data)); - EXPECT_CALL(*this, validator_recv_frame(_, _, _)).With(Args<1, 2>(ElementsAreArray(original_data))); - int i; - for (auto& d : sent_data) { - byte_stuffer_recv_byte(1, d); - } -} - -TEST_F(ByteStuffer, sends_and_receives_full_roundtrip_254_bytes) { - uint8_t original_data[254]; - int i; - for (i = 0; i < 254; i++) { - original_data[i] = i + 1; - } - byte_stuffer_send_frame(0, original_data, sizeof(original_data)); - EXPECT_CALL(*this, validator_recv_frame(_, _, _)).With(Args<1, 2>(ElementsAreArray(original_data))); - for (auto& d : sent_data) { - byte_stuffer_recv_byte(1, d); - } -} - -TEST_F(ByteStuffer, sends_and_receives_full_roundtrip_256_bytes) { - uint8_t original_data[256]; - int i; - for (i = 0; i < 254; i++) { - original_data[i] = i + 1; - } - original_data[254] = 22; - original_data[255] = 23; - byte_stuffer_send_frame(0, original_data, sizeof(original_data)); - EXPECT_CALL(*this, validator_recv_frame(_, _, _)).With(Args<1, 2>(ElementsAreArray(original_data))); - for (auto& d : sent_data) { - byte_stuffer_recv_byte(1, d); - } -} - -TEST_F(ByteStuffer, sends_and_receives_full_roundtrip_254_bytes_and_then_zero) { - uint8_t original_data[255]; - int i; - for (i = 0; i < 254; i++) { - original_data[i] = i + 1; - } - original_data[254] = 0; - byte_stuffer_send_frame(0, original_data, sizeof(original_data)); - EXPECT_CALL(*this, validator_recv_frame(_, _, _)).With(Args<1, 2>(ElementsAreArray(original_data))); - for (auto& d : sent_data) { - byte_stuffer_recv_byte(1, d); - } -} diff --git a/quantum/serial_link/tests/frame_router_tests.cpp b/quantum/serial_link/tests/frame_router_tests.cpp deleted file mode 100644 index f76dfb33d6..0000000000 --- a/quantum/serial_link/tests/frame_router_tests.cpp +++ /dev/null @@ -1,204 +0,0 @@ -/* -The MIT License (MIT) - -Copyright (c) 2016 Fred Sundvik - -Permission is hereby granted, free of charge, to any person obtaining a copy -of this software and associated documentation files (the "Software"), to deal -in the Software without restriction, including without limitation the rights -to use, copy, modify, merge, publish, distribute, sublicense, and/or sell -copies of the Software, and to permit persons to whom the Software is -furnished to do so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ - -#include "gtest/gtest.h" -#include "gmock/gmock.h" -#include -extern "C" { -#include "serial_link/protocol/transport.h" -#include "serial_link/protocol/byte_stuffer.h" -#include "serial_link/protocol/frame_router.h" -} - -using testing::_; -using testing::Args; -using testing::ElementsAreArray; - -class FrameRouter : public testing::Test { - public: - FrameRouter() : current_router_buffer(nullptr) { - Instance = this; - init_byte_stuffer(); - } - - ~FrameRouter() { Instance = nullptr; } - - void send_data(uint8_t link, const uint8_t* data, uint16_t size) { - auto& buffer = current_router_buffer->send_buffers[link]; - std::copy(data, data + size, std::back_inserter(buffer)); - } - - void receive_data(uint8_t link, uint8_t* data, uint16_t size) { - int i; - for (i = 0; i < size; i++) { - byte_stuffer_recv_byte(link, data[i]); - } - } - - void activate_router(uint8_t num) { - current_router_buffer = router_buffers + num; - router_set_master(num == 0); - } - - void simulate_transport(uint8_t from, uint8_t to) { - activate_router(to); - if (from > to) { - receive_data(DOWN_LINK, router_buffers[from].send_buffers[UP_LINK].data(), router_buffers[from].send_buffers[UP_LINK].size()); - } else if (to > from) { - receive_data(UP_LINK, router_buffers[from].send_buffers[DOWN_LINK].data(), router_buffers[from].send_buffers[DOWN_LINK].size()); - } - } - - MOCK_METHOD3(transport_recv_frame, void(uint8_t from, uint8_t* data, uint16_t size)); - - std::vector received_data; - - struct router_buffer { - std::vector send_buffers[2]; - }; - - router_buffer router_buffers[8]; - router_buffer* current_router_buffer; - - static FrameRouter* Instance; -}; - -FrameRouter* FrameRouter::Instance = nullptr; - -typedef struct { - std::array data; - uint8_t extra[16]; -} frame_buffer_t; - -extern "C" { -void send_data(uint8_t link, const uint8_t* data, uint16_t size) { FrameRouter::Instance->send_data(link, data, size); } - -void transport_recv_frame(uint8_t from, uint8_t* data, uint16_t size) { FrameRouter::Instance->transport_recv_frame(from, data, size); } -} - -TEST_F(FrameRouter, master_broadcast_is_received_by_everyone) { - frame_buffer_t data; - data.data = {0xAB, 0x70, 0x55, 0xBB}; - activate_router(0); - router_send_frame(0xFF, (uint8_t*)&data, 4); - EXPECT_GT(router_buffers[0].send_buffers[DOWN_LINK].size(), 0); - EXPECT_EQ(router_buffers[0].send_buffers[UP_LINK].size(), 0); - EXPECT_CALL(*this, transport_recv_frame(0, _, _)).With(Args<1, 2>(ElementsAreArray(data.data))); - simulate_transport(0, 1); - EXPECT_GT(router_buffers[1].send_buffers[DOWN_LINK].size(), 0); - EXPECT_EQ(router_buffers[1].send_buffers[UP_LINK].size(), 0); - - EXPECT_CALL(*this, transport_recv_frame(0, _, _)).With(Args<1, 2>(ElementsAreArray(data.data))); - simulate_transport(1, 2); - EXPECT_GT(router_buffers[2].send_buffers[DOWN_LINK].size(), 0); - EXPECT_EQ(router_buffers[2].send_buffers[UP_LINK].size(), 0); -} - -TEST_F(FrameRouter, master_send_is_received_by_targets) { - frame_buffer_t data; - data.data = {0xAB, 0x70, 0x55, 0xBB}; - activate_router(0); - router_send_frame((1 << 1) | (1 << 2), (uint8_t*)&data, 4); - EXPECT_GT(router_buffers[0].send_buffers[DOWN_LINK].size(), 0); - EXPECT_EQ(router_buffers[0].send_buffers[UP_LINK].size(), 0); - - simulate_transport(0, 1); - EXPECT_GT(router_buffers[1].send_buffers[DOWN_LINK].size(), 0); - EXPECT_EQ(router_buffers[1].send_buffers[UP_LINK].size(), 0); - - EXPECT_CALL(*this, transport_recv_frame(0, _, _)).With(Args<1, 2>(ElementsAreArray(data.data))); - simulate_transport(1, 2); - EXPECT_GT(router_buffers[2].send_buffers[DOWN_LINK].size(), 0); - EXPECT_EQ(router_buffers[2].send_buffers[UP_LINK].size(), 0); - - EXPECT_CALL(*this, transport_recv_frame(0, _, _)).With(Args<1, 2>(ElementsAreArray(data.data))); - simulate_transport(2, 3); - EXPECT_GT(router_buffers[3].send_buffers[DOWN_LINK].size(), 0); - EXPECT_EQ(router_buffers[3].send_buffers[UP_LINK].size(), 0); -} - -TEST_F(FrameRouter, first_link_sends_to_master) { - frame_buffer_t data; - data.data = {0xAB, 0x70, 0x55, 0xBB}; - activate_router(1); - router_send_frame(0, (uint8_t*)&data, 4); - EXPECT_GT(router_buffers[1].send_buffers[UP_LINK].size(), 0); - EXPECT_EQ(router_buffers[1].send_buffers[DOWN_LINK].size(), 0); - - EXPECT_CALL(*this, transport_recv_frame(1, _, _)).With(Args<1, 2>(ElementsAreArray(data.data))); - simulate_transport(1, 0); - EXPECT_EQ(router_buffers[0].send_buffers[DOWN_LINK].size(), 0); - EXPECT_EQ(router_buffers[0].send_buffers[UP_LINK].size(), 0); -} - -TEST_F(FrameRouter, second_link_sends_to_master) { - frame_buffer_t data; - data.data = {0xAB, 0x70, 0x55, 0xBB}; - activate_router(2); - router_send_frame(0, (uint8_t*)&data, 4); - EXPECT_GT(router_buffers[2].send_buffers[UP_LINK].size(), 0); - EXPECT_EQ(router_buffers[2].send_buffers[DOWN_LINK].size(), 0); - - simulate_transport(2, 1); - EXPECT_GT(router_buffers[1].send_buffers[UP_LINK].size(), 0); - EXPECT_EQ(router_buffers[1].send_buffers[DOWN_LINK].size(), 0); - - EXPECT_CALL(*this, transport_recv_frame(2, _, _)).With(Args<1, 2>(ElementsAreArray(data.data))); - simulate_transport(1, 0); - EXPECT_EQ(router_buffers[0].send_buffers[DOWN_LINK].size(), 0); - EXPECT_EQ(router_buffers[0].send_buffers[UP_LINK].size(), 0); -} - -TEST_F(FrameRouter, master_sends_to_master_does_nothing) { - frame_buffer_t data; - data.data = {0xAB, 0x70, 0x55, 0xBB}; - activate_router(0); - router_send_frame(0, (uint8_t*)&data, 4); - EXPECT_EQ(router_buffers[0].send_buffers[UP_LINK].size(), 0); - EXPECT_EQ(router_buffers[0].send_buffers[DOWN_LINK].size(), 0); -} - -TEST_F(FrameRouter, link_sends_to_other_link_does_nothing) { - frame_buffer_t data; - data.data = {0xAB, 0x70, 0x55, 0xBB}; - activate_router(1); - router_send_frame(2, (uint8_t*)&data, 4); - EXPECT_EQ(router_buffers[1].send_buffers[UP_LINK].size(), 0); - EXPECT_EQ(router_buffers[1].send_buffers[DOWN_LINK].size(), 0); -} - -TEST_F(FrameRouter, master_receives_on_uplink_does_nothing) { - frame_buffer_t data; - data.data = {0xAB, 0x70, 0x55, 0xBB}; - activate_router(1); - router_send_frame(0, (uint8_t*)&data, 4); - EXPECT_GT(router_buffers[1].send_buffers[UP_LINK].size(), 0); - EXPECT_EQ(router_buffers[1].send_buffers[DOWN_LINK].size(), 0); - - EXPECT_CALL(*this, transport_recv_frame(_, _, _)).Times(0); - activate_router(0); - receive_data(UP_LINK, router_buffers[1].send_buffers[UP_LINK].data(), router_buffers[1].send_buffers[UP_LINK].size()); - EXPECT_EQ(router_buffers[0].send_buffers[UP_LINK].size(), 0); - EXPECT_EQ(router_buffers[0].send_buffers[DOWN_LINK].size(), 0); -} diff --git a/quantum/serial_link/tests/frame_validator_tests.cpp b/quantum/serial_link/tests/frame_validator_tests.cpp deleted file mode 100644 index 43dc57b633..0000000000 --- a/quantum/serial_link/tests/frame_validator_tests.cpp +++ /dev/null @@ -1,100 +0,0 @@ -/* -The MIT License (MIT) - -Copyright (c) 2016 Fred Sundvik - -Permission is hereby granted, free of charge, to any person obtaining a copy -of this software and associated documentation files (the "Software"), to deal -in the Software without restriction, including without limitation the rights -to use, copy, modify, merge, publish, distribute, sublicense, and/or sell -copies of the Software, and to permit persons to whom the Software is -furnished to do so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ - -#include "gtest/gtest.h" -#include "gmock/gmock.h" -extern "C" { -#include "serial_link/protocol/frame_validator.h" -} - -using testing::_; -using testing::Args; -using testing::ElementsAreArray; - -class FrameValidator : public testing::Test { - public: - FrameValidator() { Instance = this; } - - ~FrameValidator() { Instance = nullptr; } - - MOCK_METHOD3(route_incoming_frame, void(uint8_t link, uint8_t* data, uint16_t size)); - MOCK_METHOD3(byte_stuffer_send_frame, void(uint8_t link, uint8_t* data, uint16_t size)); - - static FrameValidator* Instance; -}; - -FrameValidator* FrameValidator::Instance = nullptr; - -extern "C" { -void route_incoming_frame(uint8_t link, uint8_t* data, uint16_t size) { FrameValidator::Instance->route_incoming_frame(link, data, size); } - -void byte_stuffer_send_frame(uint8_t link, uint8_t* data, uint16_t size) { FrameValidator::Instance->byte_stuffer_send_frame(link, data, size); } -} - -TEST_F(FrameValidator, doesnt_validate_frames_under_5_bytes) { - EXPECT_CALL(*this, route_incoming_frame(_, _, _)).Times(0); - uint8_t data[] = {1, 2}; - validator_recv_frame(0, 0, 1); - validator_recv_frame(0, data, 2); - validator_recv_frame(0, data, 3); - validator_recv_frame(0, data, 4); -} - -TEST_F(FrameValidator, validates_one_byte_frame_with_correct_crc) { - uint8_t data[] = {0x44, 0x04, 0x6A, 0xB3, 0xA3}; - EXPECT_CALL(*this, route_incoming_frame(_, _, _)).With(Args<1, 2>(ElementsAreArray(data, 1))); - validator_recv_frame(0, data, 5); -} - -TEST_F(FrameValidator, does_not_validate_one_byte_frame_with_incorrect_crc) { - uint8_t data[] = {0x44, 0, 0, 0, 0}; - EXPECT_CALL(*this, route_incoming_frame(_, _, _)).Times(0); - validator_recv_frame(1, data, 5); -} - -TEST_F(FrameValidator, validates_four_byte_frame_with_correct_crc) { - uint8_t data[] = {0x44, 0x10, 0xFF, 0x00, 0x74, 0x4E, 0x30, 0xBA}; - EXPECT_CALL(*this, route_incoming_frame(_, _, _)).With(Args<1, 2>(ElementsAreArray(data, 4))); - validator_recv_frame(1, data, 8); -} - -TEST_F(FrameValidator, validates_five_byte_frame_with_correct_crc) { - uint8_t data[] = {1, 2, 3, 4, 5, 0xF4, 0x99, 0x0B, 0x47}; - EXPECT_CALL(*this, route_incoming_frame(_, _, _)).With(Args<1, 2>(ElementsAreArray(data, 5))); - validator_recv_frame(0, data, 9); -} - -TEST_F(FrameValidator, sends_one_byte_with_correct_crc) { - uint8_t original[] = {0x44, 0, 0, 0, 0}; - uint8_t expected[] = {0x44, 0x04, 0x6A, 0xB3, 0xA3}; - EXPECT_CALL(*this, byte_stuffer_send_frame(_, _, _)).With(Args<1, 2>(ElementsAreArray(expected))); - validator_send_frame(0, original, 1); -} - -TEST_F(FrameValidator, sends_five_bytes_with_correct_crc) { - uint8_t original[] = {1, 2, 3, 4, 5, 0, 0, 0, 0}; - uint8_t expected[] = {1, 2, 3, 4, 5, 0xF4, 0x99, 0x0B, 0x47}; - EXPECT_CALL(*this, byte_stuffer_send_frame(_, _, _)).With(Args<1, 2>(ElementsAreArray(expected))); - validator_send_frame(0, original, 5); -} diff --git a/quantum/serial_link/tests/rules.mk b/quantum/serial_link/tests/rules.mk deleted file mode 100644 index b81515bc55..0000000000 --- a/quantum/serial_link/tests/rules.mk +++ /dev/null @@ -1,22 +0,0 @@ -serial_link_byte_stuffer_SRC :=\ - $(SERIAL_PATH)/tests/byte_stuffer_tests.cpp \ - $(SERIAL_PATH)/protocol/byte_stuffer.c - -serial_link_frame_validator_SRC := \ - $(SERIAL_PATH)/tests/frame_validator_tests.cpp \ - $(SERIAL_PATH)/protocol/frame_validator.c - -serial_link_frame_router_SRC := \ - $(SERIAL_PATH)/tests/frame_router_tests.cpp \ - $(SERIAL_PATH)/protocol/byte_stuffer.c \ - $(SERIAL_PATH)/protocol/frame_validator.c \ - $(SERIAL_PATH)/protocol/frame_router.c - -serial_link_triple_buffered_object_SRC := \ - $(SERIAL_PATH)/tests/triple_buffered_object_tests.cpp \ - $(SERIAL_PATH)/protocol/triple_buffered_object.c - -serial_link_transport_SRC := \ - $(SERIAL_PATH)/tests/transport_tests.cpp \ - $(SERIAL_PATH)/protocol/transport.c \ - $(SERIAL_PATH)/protocol/triple_buffered_object.c diff --git a/quantum/serial_link/tests/testlist.mk b/quantum/serial_link/tests/testlist.mk deleted file mode 100644 index c5edaf478f..0000000000 --- a/quantum/serial_link/tests/testlist.mk +++ /dev/null @@ -1,6 +0,0 @@ -TEST_LIST +=\ - serial_link_byte_stuffer\ - serial_link_frame_validator\ - serial_link_frame_router\ - serial_link_triple_buffered_object\ - serial_link_transport diff --git a/quantum/serial_link/tests/transport_tests.cpp b/quantum/serial_link/tests/transport_tests.cpp deleted file mode 100644 index cfd1110460..0000000000 --- a/quantum/serial_link/tests/transport_tests.cpp +++ /dev/null @@ -1,184 +0,0 @@ -/* -The MIT License (MIT) - -Copyright (c) 2016 Fred Sundvik - -Permission is hereby granted, free of charge, to any person obtaining a copy -of this software and associated documentation files (the "Software"), to deal -in the Software without restriction, including without limitation the rights -to use, copy, modify, merge, publish, distribute, sublicense, and/or sell -copies of the Software, and to permit persons to whom the Software is -furnished to do so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ - -#include "gtest/gtest.h" -#include "gmock/gmock.h" - -using testing::_; -using testing::Args; -using testing::ElementsAreArray; - -extern "C" { -#include "serial_link/protocol/transport.h" -} - -struct test_object1 { - uint32_t test; -}; - -struct test_object2 { - uint32_t test1; - uint32_t test2; -}; - -MASTER_TO_ALL_SLAVES_OBJECT(master_to_slave, test_object1); -MASTER_TO_SINGLE_SLAVE_OBJECT(master_to_single_slave, test_object1); -SLAVE_TO_MASTER_OBJECT(slave_to_master, test_object1); - -static remote_object_t* test_remote_objects[] = { - REMOTE_OBJECT(master_to_slave), - REMOTE_OBJECT(master_to_single_slave), - REMOTE_OBJECT(slave_to_master), -}; - -class Transport : public testing::Test { - public: - Transport() { - Instance = this; - add_remote_objects(test_remote_objects, sizeof(test_remote_objects) / sizeof(remote_object_t*)); - } - - ~Transport() { - Instance = nullptr; - reinitialize_serial_link_transport(); - } - - MOCK_METHOD0(signal_data_written, void()); - MOCK_METHOD1(router_send_frame, void(uint8_t destination)); - - void router_send_frame(uint8_t destination, uint8_t* data, uint16_t size) { - router_send_frame(destination); - std::copy(data, data + size, std::back_inserter(sent_data)); - } - - static Transport* Instance; - - std::vector sent_data; -}; - -Transport* Transport::Instance = nullptr; - -extern "C" { -void signal_data_written(void) { Transport::Instance->signal_data_written(); } - -void router_send_frame(uint8_t destination, uint8_t* data, uint16_t size) { Transport::Instance->router_send_frame(destination, data, size); } -} - -TEST_F(Transport, write_to_local_signals_an_event) { - begin_write_master_to_slave(); - EXPECT_CALL(*this, signal_data_written()); - end_write_master_to_slave(); - begin_write_slave_to_master(); - EXPECT_CALL(*this, signal_data_written()); - end_write_slave_to_master(); - begin_write_master_to_single_slave(1); - EXPECT_CALL(*this, signal_data_written()); - end_write_master_to_single_slave(1); -} - -TEST_F(Transport, writes_from_master_to_all_slaves) { - update_transport(); - test_object1* obj = begin_write_master_to_slave(); - obj->test = 5; - EXPECT_CALL(*this, signal_data_written()); - end_write_master_to_slave(); - EXPECT_CALL(*this, router_send_frame(0xFF)); - update_transport(); - transport_recv_frame(0, sent_data.data(), sent_data.size()); - test_object1* obj2 = read_master_to_slave(); - EXPECT_NE(obj2, nullptr); - EXPECT_EQ(obj2->test, 5); -} - -TEST_F(Transport, writes_from_slave_to_master) { - update_transport(); - test_object1* obj = begin_write_slave_to_master(); - obj->test = 7; - EXPECT_CALL(*this, signal_data_written()); - end_write_slave_to_master(); - EXPECT_CALL(*this, router_send_frame(0)); - update_transport(); - transport_recv_frame(3, sent_data.data(), sent_data.size()); - test_object1* obj2 = read_slave_to_master(2); - EXPECT_EQ(read_slave_to_master(0), nullptr); - EXPECT_NE(obj2, nullptr); - EXPECT_EQ(obj2->test, 7); -} - -TEST_F(Transport, writes_from_master_to_single_slave) { - update_transport(); - test_object1* obj = begin_write_master_to_single_slave(3); - obj->test = 7; - EXPECT_CALL(*this, signal_data_written()); - end_write_master_to_single_slave(3); - EXPECT_CALL(*this, router_send_frame(4)); - update_transport(); - transport_recv_frame(0, sent_data.data(), sent_data.size()); - test_object1* obj2 = read_master_to_single_slave(); - EXPECT_NE(obj2, nullptr); - EXPECT_EQ(obj2->test, 7); -} - -TEST_F(Transport, ignores_object_with_invalid_id) { - update_transport(); - test_object1* obj = begin_write_master_to_single_slave(3); - obj->test = 7; - EXPECT_CALL(*this, signal_data_written()); - end_write_master_to_single_slave(3); - EXPECT_CALL(*this, router_send_frame(4)); - update_transport(); - sent_data[sent_data.size() - 1] = 44; - transport_recv_frame(0, sent_data.data(), sent_data.size()); - test_object1* obj2 = read_master_to_single_slave(); - EXPECT_EQ(obj2, nullptr); -} - -TEST_F(Transport, ignores_object_with_size_too_small) { - update_transport(); - test_object1* obj = begin_write_master_to_slave(); - obj->test = 7; - EXPECT_CALL(*this, signal_data_written()); - end_write_master_to_slave(); - EXPECT_CALL(*this, router_send_frame(_)); - update_transport(); - sent_data[sent_data.size() - 2] = 0; - transport_recv_frame(0, sent_data.data(), sent_data.size() - 1); - test_object1* obj2 = read_master_to_slave(); - EXPECT_EQ(obj2, nullptr); -} - -TEST_F(Transport, ignores_object_with_size_too_big) { - update_transport(); - test_object1* obj = begin_write_master_to_slave(); - obj->test = 7; - EXPECT_CALL(*this, signal_data_written()); - end_write_master_to_slave(); - EXPECT_CALL(*this, router_send_frame(_)); - update_transport(); - sent_data.resize(sent_data.size() + 22); - sent_data[sent_data.size() - 1] = 0; - transport_recv_frame(0, sent_data.data(), sent_data.size()); - test_object1* obj2 = read_master_to_slave(); - EXPECT_EQ(obj2, nullptr); -} diff --git a/quantum/serial_link/tests/triple_buffered_object_tests.cpp b/quantum/serial_link/tests/triple_buffered_object_tests.cpp deleted file mode 100644 index 8de9bfdebf..0000000000 --- a/quantum/serial_link/tests/triple_buffered_object_tests.cpp +++ /dev/null @@ -1,80 +0,0 @@ -/* -The MIT License (MIT) - -Copyright (c) 2016 Fred Sundvik - -Permission is hereby granted, free of charge, to any person obtaining a copy -of this software and associated documentation files (the "Software"), to deal -in the Software without restriction, including without limitation the rights -to use, copy, modify, merge, publish, distribute, sublicense, and/or sell -copies of the Software, and to permit persons to whom the Software is -furnished to do so, subject to the following conditions: - -The above copyright notice and this permission notice shall be included in all -copies or substantial portions of the Software. - -THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER -LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, -OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE -SOFTWARE. -*/ - -#include "gtest/gtest.h" -extern "C" { -#include "serial_link/protocol/triple_buffered_object.h" -} - -struct test_object { - uint8_t state; - uint32_t buffer[3]; -}; - -test_object test_object; - -class TripleBufferedObject : public testing::Test { - public: - TripleBufferedObject() { triple_buffer_init((triple_buffer_object_t*)&test_object); } -}; - -TEST_F(TripleBufferedObject, writes_and_reads_object) { - *triple_buffer_begin_write(&test_object) = 0x3456ABCC; - triple_buffer_end_write(&test_object); - EXPECT_EQ(*triple_buffer_read(&test_object), 0x3456ABCC); -} - -TEST_F(TripleBufferedObject, does_not_read_empty) { EXPECT_EQ(triple_buffer_read(&test_object), nullptr); } - -TEST_F(TripleBufferedObject, writes_twice_and_reads_object) { - *triple_buffer_begin_write(&test_object) = 0x3456ABCC; - triple_buffer_end_write(&test_object); - *triple_buffer_begin_write(&test_object) = 0x44778899; - triple_buffer_end_write(&test_object); - EXPECT_EQ(*triple_buffer_read(&test_object), 0x44778899); -} - -TEST_F(TripleBufferedObject, performs_another_write_in_the_middle_of_read) { - *triple_buffer_begin_write(&test_object) = 1; - triple_buffer_end_write(&test_object); - uint32_t* read = triple_buffer_read(&test_object); - *triple_buffer_begin_write(&test_object) = 2; - triple_buffer_end_write(&test_object); - EXPECT_EQ(*read, 1); - EXPECT_EQ(*triple_buffer_read(&test_object), 2); - EXPECT_EQ(triple_buffer_read(&test_object), nullptr); -} - -TEST_F(TripleBufferedObject, performs_two_writes_in_the_middle_of_read) { - *triple_buffer_begin_write(&test_object) = 1; - triple_buffer_end_write(&test_object); - uint32_t* read = triple_buffer_read(&test_object); - *triple_buffer_begin_write(&test_object) = 2; - triple_buffer_end_write(&test_object); - *triple_buffer_begin_write(&test_object) = 3; - triple_buffer_end_write(&test_object); - EXPECT_EQ(*read, 1); - EXPECT_EQ(*triple_buffer_read(&test_object), 3); - EXPECT_EQ(triple_buffer_read(&test_object), nullptr); -} diff --git a/show_options.mk b/show_options.mk index 03008ccabf..0831069635 100644 --- a/show_options.mk +++ b/show_options.mk @@ -21,7 +21,6 @@ HARDWARE_OPTION_NAMES = \ RGBLIGHT_CUSTOM_DRIVER \ RGB_MATRIX_ENABLE \ RGB_MATRIX_DRIVER \ - SERIAL_LINK_ENABLE \ CIE1931_CURVE \ MIDI_ENABLE \ BLUETOOTH_ENABLE \ diff --git a/testlist.mk b/testlist.mk index b66b93d295..364fb339c6 100644 --- a/testlist.mk +++ b/testlist.mk @@ -3,7 +3,6 @@ FULL_TESTS := $(TEST_LIST) include $(ROOT_DIR)/quantum/debounce/tests/testlist.mk include $(ROOT_DIR)/quantum/sequencer/tests/testlist.mk -include $(ROOT_DIR)/quantum/serial_link/tests/testlist.mk include $(ROOT_DIR)/tmk_core/common/test/testlist.mk define VALIDATE_TEST_LIST diff --git a/tmk_core/common/sync_timer.c b/tmk_core/common/sync_timer.c index 68b92d8b43..de24b463b6 100644 --- a/tmk_core/common/sync_timer.c +++ b/tmk_core/common/sync_timer.c @@ -26,7 +26,7 @@ SOFTWARE. #include "sync_timer.h" #include "keyboard.h" -#if (defined(SPLIT_KEYBOARD) || defined(SERIAL_LINK_ENABLE)) && !defined(DISABLE_SYNC_TIMER) +#if defined(SPLIT_KEYBOARD) && !defined(DISABLE_SYNC_TIMER) volatile int32_t sync_timer_ms; void sync_timer_init(void) { sync_timer_ms = 0; } diff --git a/tmk_core/common/sync_timer.h b/tmk_core/common/sync_timer.h index 744e2b50d5..9ddef45bb2 100644 --- a/tmk_core/common/sync_timer.h +++ b/tmk_core/common/sync_timer.h @@ -32,7 +32,7 @@ SOFTWARE. extern "C" { #endif -#if (defined(SPLIT_KEYBOARD) || defined(SERIAL_LINK_ENABLE)) && !defined(DISABLE_SYNC_TIMER) +#if defined(SPLIT_KEYBOARD) && !defined(DISABLE_SYNC_TIMER) void sync_timer_init(void); void sync_timer_update(uint32_t time); uint16_t sync_timer_read(void); diff --git a/tmk_core/protocol/chibios/chibios.c b/tmk_core/protocol/chibios/chibios.c index 26181d8c76..c860328c80 100644 --- a/tmk_core/protocol/chibios/chibios.c +++ b/tmk_core/protocol/chibios/chibios.c @@ -43,9 +43,6 @@ #ifdef SLEEP_LED_ENABLE # include "sleep_led.h" #endif -#ifdef SERIAL_LINK_ENABLE -# include "serial_link/system/serial_link.h" -#endif #ifdef MIDI_ENABLE # include "qmk_midi.h" #endif @@ -154,15 +151,11 @@ void protocol_init(void) { setup_midi(); #endif -#ifdef SERIAL_LINK_ENABLE - init_serial_link(); -#endif - host_driver_t *driver = NULL; - /* Wait until the USB or serial link is active */ + /* Wait until USB is active */ while (true) { -#if defined(WAIT_FOR_USB) || defined(SERIAL_LINK_ENABLE) +#if defined(WAIT_FOR_USB) if (USB_DRIVER.state == USB_ACTIVE) { driver = &chibios_driver; break; @@ -170,13 +163,6 @@ void protocol_init(void) { #else driver = &chibios_driver; break; -#endif -#ifdef SERIAL_LINK_ENABLE - if (is_serial_link_connected()) { - driver = get_serial_link_driver(); - break; - } - serial_link_update(); #endif wait_ms(50); } @@ -209,9 +195,6 @@ void protocol_task(void) { print("[s]"); while (USB_DRIVER.state == USB_SUSPENDED) { /* Do this in the suspended state */ -# ifdef SERIAL_LINK_ENABLE - serial_link_update(); -# endif suspend_power_down(); // on AVR this deep sleeps for 15ms /* Remote wakeup */ if (suspend_wakeup_condition()) { From 63cb273d1504d070ce7ea6e84f86e22b1d665206 Mon Sep 17 00:00:00 2001 From: jmcwilliams403 <37010132+jmcwilliams403@users.noreply.github.com> Date: Thu, 7 Oct 2021 09:49:16 -0400 Subject: [PATCH 209/595] Enabled Bootmagic Lite (#14573) * Enabled Bootmagic Lite * Enabled Bootmagic Lite Co-authored-by: Sergey Vlasov Co-authored-by: Sergey Vlasov --- keyboards/boardwalk/rules.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/keyboards/boardwalk/rules.mk b/keyboards/boardwalk/rules.mk index 66be996153..44fcf3f003 100644 --- a/keyboards/boardwalk/rules.mk +++ b/keyboards/boardwalk/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = atmel-dfu # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug From 0d72438ad6e422bc68cd1ce5aa92735d8d6993d1 Mon Sep 17 00:00:00 2001 From: precondition <57645186+precondition@users.noreply.github.com> Date: Thu, 7 Oct 2021 16:01:50 +0200 Subject: [PATCH 210/595] Correct the Turkish F '?' keycode (TR_QUES) (#14740) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit define TR_QUES S(TR_ASTR) // ? → define TR_QUES S(TR_SLSH) // ? --- quantum/keymap_extras/keymap_turkish_f.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/quantum/keymap_extras/keymap_turkish_f.h b/quantum/keymap_extras/keymap_turkish_f.h index 226f8cbeb0..f86ef21546 100644 --- a/quantum/keymap_extras/keymap_turkish_f.h +++ b/quantum/keymap_extras/keymap_turkish_f.h @@ -111,7 +111,7 @@ #define TR_LPRN S(TR_8) // ( #define TR_RPRN S(TR_9) // ) #define TR_EQL S(TR_0) // = -#define TR_QUES S(TR_ASTR) // ? +#define TR_QUES S(TR_SLSH) // ? #define TR_UNDS S(TR_MINS) // _ // Row 4 #define TR_RABK S(TR_LABK) // > From 12b9bedee54cf9c7dc6a8fcdeae485ba9fb30ab8 Mon Sep 17 00:00:00 2001 From: Bahrul Hidayat Date: Fri, 8 Oct 2021 01:45:56 +0800 Subject: [PATCH 211/595] update product id for selka40 (#14629) --- keyboards/dyz/selka40/info.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/keyboards/dyz/selka40/info.json b/keyboards/dyz/selka40/info.json index 5643cf7392..048dbf45f3 100644 --- a/keyboards/dyz/selka40/info.json +++ b/keyboards/dyz/selka40/info.json @@ -19,7 +19,7 @@ }, "usb": { "vid": "0xD772", - "pid": "0x000C", + "pid": "0x0012", "device_ver": "0x0001" }, "layouts": { From cbf1e0bab583eac17bd183dea6ff57d3527fac2b Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Thu, 7 Oct 2021 17:51:38 +0000 Subject: [PATCH 212/595] Dyz40 Configurator fixes (#14739) * add matrix diagram to keyboard header file * friendly-format info.json * correct layout data * add legends to info.json key labels * add LAYOUT_split_space_split_bs Rename the `LAYOUT` tree in info.json to `LAYOUT_split_space_split_bs`, and add a corresponding layout macro. * add LAYOUT_all data to info.json * add LAYOUT_7u_space * add LAYOUT_7u_space_split_bs * add LAYOUT_split_space * convert tabs to spaces in dyz40.h --- keyboards/dyz/dyz40/dyz40.h | 75 +++++++++- keyboards/dyz/dyz40/info.json | 254 +++++++++++++++++++++++++++++++++- 2 files changed, 322 insertions(+), 7 deletions(-) diff --git a/keyboards/dyz/dyz40/dyz40.h b/keyboards/dyz/dyz40/dyz40.h index 8fc7c7d6b6..8a70432196 100644 --- a/keyboards/dyz/dyz40/dyz40.h +++ b/keyboards/dyz/dyz40/dyz40.h @@ -18,14 +18,79 @@ #include "quantum.h" #define _X_ KC_NO +/* ┌───────┐ + * │0B │ 2u Backspace + * └───────┘ + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ + * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0A │0B │0C │ + * ├───┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴───┤ + * │10 │11 │12 │13 │14 │15 │16 │17 │18 │19 │1A │1B │ + * ├────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬────┤ + * │20 │21 │22 │23 │24 │25 │26 │27 │28 │29 │2A │2B │ + * ├─────┬┴──┬┴───┴┬──┴───┴─┬─┴───┴───┴┬──┴──┬┴──┬┴────┤ + * │30 │31 │32 │33 │37 │3A │3B │3C │ + * └─────┴───┴─────┴────────┴──────────┴─────┴───┴─────┘ + * ┌─────┬─────┬───────────────────────────┬─────┬─────┐ + * │30 │31 │36 │3B │3C │ 7u Space + * └─────┴─────┴───────────────────────────┴─────┴─────┘ + */ + #define LAYOUT_all( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, \ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \ K30, K31, K32, K33, K36, K37, K3A, K3B, K3C \ ) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, _X_ }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, _X_ }, \ - { K30, K31, K32, K33, _X_, _X_, K36, K37, _X_, _X_, K3A, K3B, K3C } \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, _X_ }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, _X_ }, \ + { K30, K31, K32, K33, _X_, _X_, K36, K37, _X_, _X_, K3A, K3B, K3C } \ +} + +#define LAYOUT_7u_space( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \ + K30, K31, K36, K3B, K3C \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, _X_ }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, _X_ }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, _X_ }, \ + { K30, K31, _X_, _X_, _X_, _X_, K36, _X_, _X_, _X_, _X_, K3B, K3C } \ +} + +#define LAYOUT_7u_space_split_bs( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \ + K30, K31, K36, K3B, K3C \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, _X_ }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, _X_ }, \ + { K30, K31, _X_, _X_, _X_, _X_, K36, _X_, _X_, _X_, _X_, K3B, K3C } \ +} + +#define LAYOUT_split_space( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \ + K30, K31, K32, K33, K37, K3A, K3B, K3C \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, _X_ }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, _X_ }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, _X_ }, \ + { K30, K31, K32, K33, _X_, _X_, _X_, K37, _X_, _X_, K3A, K3B, K3C } \ +} + +#define LAYOUT_split_space_split_bs( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \ + K30, K31, K32, K33, K37, K3A, K3B, K3C \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, _X_ }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, _X_ }, \ + { K30, K31, K32, K33, _X_, _X_, _X_, K37, _X_, _X_, K3A, K3B, K3C } \ } diff --git a/keyboards/dyz/dyz40/info.json b/keyboards/dyz/dyz40/info.json index 4d17bbeb26..2a30ca0bb2 100644 --- a/keyboards/dyz/dyz40/info.json +++ b/keyboards/dyz/dyz40/info.json @@ -23,8 +23,258 @@ "device_ver": "0x0001" }, "layouts": { - "LAYOUT": { - "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"label":"{", "x":11, "y":0}, {"label":"}", "x":12, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.25}, {"label":"A", "x":1.25, "y":1}, {"label":"S", "x":2.25, "y":1}, {"label":"D", "x":3.25, "y":1}, {"label":"F", "x":4.25, "y":1}, {"label":"G", "x":5.25, "y":1}, {"label":"H", "x":6.25, "y":1}, {"label":"J", "x":7.25, "y":1}, {"label":"K", "x":8.25, "y":1}, {"label":"L", "x":9.25, "y":1}, {"label":"", "x":10.25, "y":1}, {"label":"Enter", "x":11.25, "y":1, "w":1.75}, {"label":"Shift", "x":0, "y":2, "w":1.75}, {"label":"Z", "x":1.75, "y":2}, {"label":"X", "x":2.75, "y":2}, {"label":"C", "x":3.75, "y":2}, {"label":"V", "x":4.75, "y":2}, {"label":"B", "x":5.75, "y":2}, {"label":"N", "x":6.75, "y":2}, {"label":"M", "x":7.75, "y":2}, {"label":"", "x":8.75, "y":2}, {"label":"", "x":9.75, "y":2}, {"label":"", "x":10.75, "y":2}, {"label":"Shift", "x":11.75, "y":2, "w":1.25}, {"label":"Ctrl", "x":0, "y":3, "w":1.5}, {"label":"Win", "x":1.5, "y":3}, {"label":"Alt", "x":2.5, "y":3, "w":1.5}, {"label":"Space", "x":4, "y":3, "w":2.75}, {"label":"Fn", "x":6.75, "y":3, "w":2.25}, {"label":"Alt", "x":9, "y":3, "w":1.5}, {"label":"Win", "x":10.5, "y":3}, {"label":"Ctrl", "x":11.5, "y":3, "w":1.5}] + "LAYOUT_all": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"Q", "x":1, "y":0}, + {"label":"W", "x":2, "y":0}, + {"label":"E", "x":3, "y":0}, + {"label":"R", "x":4, "y":0}, + {"label":"T", "x":5, "y":0}, + {"label":"Y", "x":6, "y":0}, + {"label":"U", "x":7, "y":0}, + {"label":"I", "x":8, "y":0}, + {"label":"O", "x":9, "y":0}, + {"label":"P", "x":10, "y":0}, + {"label":"[{", "x":11, "y":0}, + {"label":"]}", "x":12, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.25}, + {"label":"A", "x":1.25, "y":1}, + {"label":"S", "x":2.25, "y":1}, + {"label":"D", "x":3.25, "y":1}, + {"label":"F", "x":4.25, "y":1}, + {"label":"G", "x":5.25, "y":1}, + {"label":"H", "x":6.25, "y":1}, + {"label":"J", "x":7.25, "y":1}, + {"label":"K", "x":8.25, "y":1}, + {"label":"L", "x":9.25, "y":1}, + {"label":"'\"", "x":10.25, "y":1}, + {"label":"Enter", "x":11.25, "y":1, "w":1.75}, + + {"label":"Shift", "x":0, "y":2, "w":1.75}, + {"label":"Z", "x":1.75, "y":2}, + {"label":"X", "x":2.75, "y":2}, + {"label":"C", "x":3.75, "y":2}, + {"label":"V", "x":4.75, "y":2}, + {"label":"B", "x":5.75, "y":2}, + {"label":"N", "x":6.75, "y":2}, + {"label":"M", "x":7.75, "y":2}, + {"label":",<", "x":8.75, "y":2}, + {"label":".>", "x":9.75, "y":2}, + {"label":"/?", "x":10.75, "y":2}, + {"label":"Shift", "x":11.75, "y":2, "w":1.25}, + + {"label":"Ctrl", "x":0, "y":3, "w":1.5}, + {"label":"Win", "x":1.5, "y":3}, + {"label":"Alt", "x":2.5, "y":3, "w":1.5}, + {"label":"Space", "x":4, "y":3, "w":2.25}, + {"label":"7uSpace", "x":3, "y":4, "w":7}, + {"label":"Fn2", "x":6.25, "y":3, "w":2.75}, + {"label":"Alt", "x":9, "y":3, "w":1.5}, + {"label":"Win", "x":10.5, "y":3}, + {"label":"Ctrl", "x":11.5, "y":3, "w":1.5} + ] + }, + "LAYOUT_7u_space": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"Q", "x":1, "y":0}, + {"label":"W", "x":2, "y":0}, + {"label":"E", "x":3, "y":0}, + {"label":"R", "x":4, "y":0}, + {"label":"T", "x":5, "y":0}, + {"label":"Y", "x":6, "y":0}, + {"label":"U", "x":7, "y":0}, + {"label":"I", "x":8, "y":0}, + {"label":"O", "x":9, "y":0}, + {"label":"P", "x":10, "y":0}, + {"label":"Bksp", "x":11, "y":0, "w":2}, + + {"label":"Tab", "x":0, "y":1, "w":1.25}, + {"label":"A", "x":1.25, "y":1}, + {"label":"S", "x":2.25, "y":1}, + {"label":"D", "x":3.25, "y":1}, + {"label":"F", "x":4.25, "y":1}, + {"label":"G", "x":5.25, "y":1}, + {"label":"H", "x":6.25, "y":1}, + {"label":"J", "x":7.25, "y":1}, + {"label":"K", "x":8.25, "y":1}, + {"label":"L", "x":9.25, "y":1}, + {"label":"'\"", "x":10.25, "y":1}, + {"label":"Enter", "x":11.25, "y":1, "w":1.75}, + + {"label":"Shift", "x":0, "y":2, "w":1.75}, + {"label":"Z", "x":1.75, "y":2}, + {"label":"X", "x":2.75, "y":2}, + {"label":"C", "x":3.75, "y":2}, + {"label":"V", "x":4.75, "y":2}, + {"label":"B", "x":5.75, "y":2}, + {"label":"N", "x":6.75, "y":2}, + {"label":"M", "x":7.75, "y":2}, + {"label":",<", "x":8.75, "y":2}, + {"label":".>", "x":9.75, "y":2}, + {"label":"/?", "x":10.75, "y":2}, + {"label":"Shift", "x":11.75, "y":2, "w":1.25}, + + {"label":"Ctrl", "x":0, "y":3, "w":1.5}, + {"label":"Alt", "x":1.5, "y":3, "w":1.5}, + {"label":"7uSpace", "x":3, "y":3, "w":7}, + {"label":"Alt", "x":10, "y":3, "w":1.5}, + {"label":"Ctrl", "x":11.5, "y":3, "w":1.5} + ] + }, + "LAYOUT_7u_space_split_bs": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"Q", "x":1, "y":0}, + {"label":"W", "x":2, "y":0}, + {"label":"E", "x":3, "y":0}, + {"label":"R", "x":4, "y":0}, + {"label":"T", "x":5, "y":0}, + {"label":"Y", "x":6, "y":0}, + {"label":"U", "x":7, "y":0}, + {"label":"I", "x":8, "y":0}, + {"label":"O", "x":9, "y":0}, + {"label":"P", "x":10, "y":0}, + {"label":"[{", "x":11, "y":0}, + {"label":"]}", "x":12, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.25}, + {"label":"A", "x":1.25, "y":1}, + {"label":"S", "x":2.25, "y":1}, + {"label":"D", "x":3.25, "y":1}, + {"label":"F", "x":4.25, "y":1}, + {"label":"G", "x":5.25, "y":1}, + {"label":"H", "x":6.25, "y":1}, + {"label":"J", "x":7.25, "y":1}, + {"label":"K", "x":8.25, "y":1}, + {"label":"L", "x":9.25, "y":1}, + {"label":"'\"", "x":10.25, "y":1}, + {"label":"Enter", "x":11.25, "y":1, "w":1.75}, + + {"label":"Shift", "x":0, "y":2, "w":1.75}, + {"label":"Z", "x":1.75, "y":2}, + {"label":"X", "x":2.75, "y":2}, + {"label":"C", "x":3.75, "y":2}, + {"label":"V", "x":4.75, "y":2}, + {"label":"B", "x":5.75, "y":2}, + {"label":"N", "x":6.75, "y":2}, + {"label":"M", "x":7.75, "y":2}, + {"label":",<", "x":8.75, "y":2}, + {"label":".>", "x":9.75, "y":2}, + {"label":"/?", "x":10.75, "y":2}, + {"label":"Shift", "x":11.75, "y":2, "w":1.25}, + + {"label":"Ctrl", "x":0, "y":3, "w":1.5}, + {"label":"Alt", "x":1.5, "y":3, "w":1.5}, + {"label":"7uSpace", "x":3, "y":3, "w":7}, + {"label":"Alt", "x":10, "y":3, "w":1.5}, + {"label":"Ctrl", "x":11.5, "y":3, "w":1.5} + ] + }, + "LAYOUT_split_space": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"Q", "x":1, "y":0}, + {"label":"W", "x":2, "y":0}, + {"label":"E", "x":3, "y":0}, + {"label":"R", "x":4, "y":0}, + {"label":"T", "x":5, "y":0}, + {"label":"Y", "x":6, "y":0}, + {"label":"U", "x":7, "y":0}, + {"label":"I", "x":8, "y":0}, + {"label":"O", "x":9, "y":0}, + {"label":"P", "x":10, "y":0}, + {"label":"Bksp", "x":11, "y":0, "w":2}, + + {"label":"Tab", "x":0, "y":1, "w":1.25}, + {"label":"A", "x":1.25, "y":1}, + {"label":"S", "x":2.25, "y":1}, + {"label":"D", "x":3.25, "y":1}, + {"label":"F", "x":4.25, "y":1}, + {"label":"G", "x":5.25, "y":1}, + {"label":"H", "x":6.25, "y":1}, + {"label":"J", "x":7.25, "y":1}, + {"label":"K", "x":8.25, "y":1}, + {"label":"L", "x":9.25, "y":1}, + {"label":"'\"", "x":10.25, "y":1}, + {"label":"Enter", "x":11.25, "y":1, "w":1.75}, + + {"label":"Shift", "x":0, "y":2, "w":1.75}, + {"label":"Z", "x":1.75, "y":2}, + {"label":"X", "x":2.75, "y":2}, + {"label":"C", "x":3.75, "y":2}, + {"label":"V", "x":4.75, "y":2}, + {"label":"B", "x":5.75, "y":2}, + {"label":"N", "x":6.75, "y":2}, + {"label":"M", "x":7.75, "y":2}, + {"label":",<", "x":8.75, "y":2}, + {"label":".>", "x":9.75, "y":2}, + {"label":"/?", "x":10.75, "y":2}, + {"label":"Shift", "x":11.75, "y":2, "w":1.25}, + + {"label":"Ctrl", "x":0, "y":3, "w":1.5}, + {"label":"Win", "x":1.5, "y":3}, + {"label":"Alt", "x":2.5, "y":3, "w":1.5}, + {"label":"Space", "x":4, "y":3, "w":2.25}, + {"label":"Fn", "x":6.25, "y":3, "w":2.75}, + {"label":"Alt", "x":9, "y":3, "w":1.5}, + {"label":"Win", "x":10.5, "y":3}, + {"label":"Ctrl", "x":11.5, "y":3, "w":1.5} + ] + }, + "LAYOUT_split_space_split_bs": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"Q", "x":1, "y":0}, + {"label":"W", "x":2, "y":0}, + {"label":"E", "x":3, "y":0}, + {"label":"R", "x":4, "y":0}, + {"label":"T", "x":5, "y":0}, + {"label":"Y", "x":6, "y":0}, + {"label":"U", "x":7, "y":0}, + {"label":"I", "x":8, "y":0}, + {"label":"O", "x":9, "y":0}, + {"label":"P", "x":10, "y":0}, + {"label":"[{", "x":11, "y":0}, + {"label":"]}", "x":12, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.25}, + {"label":"A", "x":1.25, "y":1}, + {"label":"S", "x":2.25, "y":1}, + {"label":"D", "x":3.25, "y":1}, + {"label":"F", "x":4.25, "y":1}, + {"label":"G", "x":5.25, "y":1}, + {"label":"H", "x":6.25, "y":1}, + {"label":"J", "x":7.25, "y":1}, + {"label":"K", "x":8.25, "y":1}, + {"label":"L", "x":9.25, "y":1}, + {"label":"'\"", "x":10.25, "y":1}, + {"label":"Enter", "x":11.25, "y":1, "w":1.75}, + + {"label":"Shift", "x":0, "y":2, "w":1.75}, + {"label":"Z", "x":1.75, "y":2}, + {"label":"X", "x":2.75, "y":2}, + {"label":"C", "x":3.75, "y":2}, + {"label":"V", "x":4.75, "y":2}, + {"label":"B", "x":5.75, "y":2}, + {"label":"N", "x":6.75, "y":2}, + {"label":"M", "x":7.75, "y":2}, + {"label":",<", "x":8.75, "y":2}, + {"label":".>", "x":9.75, "y":2}, + {"label":"/?", "x":10.75, "y":2}, + {"label":"Shift", "x":11.75, "y":2, "w":1.25}, + + {"label":"Ctrl", "x":0, "y":3, "w":1.5}, + {"label":"Win", "x":1.5, "y":3}, + {"label":"Alt", "x":2.5, "y":3, "w":1.5}, + {"label":"Space", "x":4, "y":3, "w":2.25}, + {"label":"Fn", "x":6.25, "y":3, "w":2.75}, + {"label":"Alt", "x":9, "y":3, "w":1.5}, + {"label":"Win", "x":10.5, "y":3}, + {"label":"Ctrl", "x":11.5, "y":3, "w":1.5} + ] } } } From 13f3e30e86be0386101bdd5985be53b9c10e1761 Mon Sep 17 00:00:00 2001 From: precondition <57645186+precondition@users.noreply.github.com> Date: Thu, 7 Oct 2021 22:03:21 +0200 Subject: [PATCH 213/595] Fix link from feature_tap_dance.md to tapping term settings (#14741) --- docs/feature_tap_dance.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/feature_tap_dance.md b/docs/feature_tap_dance.md index f4e989921f..5f413d3a39 100644 --- a/docs/feature_tap_dance.md +++ b/docs/feature_tap_dance.md @@ -29,7 +29,7 @@ After this, you'll want to use the `tap_dance_actions` array to specify what act * `ACTION_TAP_DANCE_FN(fn)`: Calls the specified function - defined in the user keymap - with the final tap count of the tap dance action. * `ACTION_TAP_DANCE_FN_ADVANCED(on_each_tap_fn, on_dance_finished_fn, on_dance_reset_fn)`: Calls the first specified function - defined in the user keymap - on every tap, the second function when the dance action finishes (like the previous option), and the last function when the tap dance action resets. * ~~`ACTION_TAP_DANCE_FN_ADVANCED_TIME(on_each_tap_fn, on_dance_finished_fn, on_dance_reset_fn, tap_specific_tapping_term)`~~: This functions identically to the `ACTION_TAP_DANCE_FN_ADVANCED` function, but uses a custom tapping term for it, instead of the predefined `TAPPING_TERM`. - * This is deprecated in favor of the Per Key Tapping Term functionality, as outlined [here](custom_quantum_functions.md#Custom_Tapping_Term). You'd want to check for the specific `TD()` macro that you want to use (such as `TD(TD_ESC_CAPS)`) instead of using this specific Tap Dance function. + * This is deprecated in favor of the Per Key Tapping Term functionality, as outlined [here](tap_hold.md#tapping-term). You'd want to check for the specific `TD()` macro that you want to use (such as `TD(TD_ESC_CAPS)`) instead of using this specific Tap Dance function. The first option is enough for a lot of cases, that just want dual roles. For example, `ACTION_TAP_DANCE_DOUBLE(KC_SPC, KC_ENT)` will result in `Space` being sent on single-tap, `Enter` otherwise. From 51470dfae1185c338b4c96a510e6d45f04665bf9 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Thu, 7 Oct 2021 20:20:34 +0000 Subject: [PATCH 214/595] Dyz60 touch-up (#14742) * friendly-format info.json * refactor keymaps - update grid alignment - use four-space indent - use QMK short-form keycodes * correct info.json layout data Adds three missing positions, and corrects some key sizes. * add matrix diagram to dyz60.h * add LAYOUT_60_ansi * add LAYOUT_60_iso * add LAYOUT_60_ansi_split_bs_rshift * add LAYOUT_60_iso_split_bs_rshift * add readme * Remove duplication between config.h and info.json Duplicating settings between config.h and info.json leads to warnings when compiling. Removes the duplicated settings from config.h. --- keyboards/dyz/dyz60/config.h | 33 -- keyboards/dyz/dyz60/dyz60.h | 85 ++++- keyboards/dyz/dyz60/info.json | 356 ++++++++++++++++++- keyboards/dyz/dyz60/keymaps/default/keymap.c | 42 +-- keyboards/dyz/dyz60/keymaps/via/keymap.c | 42 +-- keyboards/dyz/dyz60/readme.md | 19 + 6 files changed, 494 insertions(+), 83 deletions(-) create mode 100644 keyboards/dyz/dyz60/readme.md diff --git a/keyboards/dyz/dyz60/config.h b/keyboards/dyz/dyz60/config.h index 160c8a02b0..a40d2de47e 100644 --- a/keyboards/dyz/dyz60/config.h +++ b/keyboards/dyz/dyz60/config.h @@ -20,42 +20,9 @@ along with this program. If not, see . #include "config_common.h" /* USB Device descriptor parameter */ -#define VENDOR_ID 0xD772 -#define PRODUCT_ID 0x000A -#define DEVICE_VER 0x0001 #define MANUFACTURER dyz #define PRODUCT dyz60 -/* key matrix size */ -#define MATRIX_ROWS 5 -#define MATRIX_COLS 14 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ -#define MATRIX_ROW_PINS { B0, E6, F0, F5, F4 } -#define MATRIX_COL_PINS { F6, F7, B3, B2, B1, D2, C7, C6, B6, B5, B4, D7, D6, D4 } -#define UNUSED_PINS - -/* COL2ROW, ROW2COL*/ -#define DIODE_DIRECTION COL2ROW - -#define RGB_DI_PIN B7 -#define RGBLED_NUM 16 -#define RGBLIGHT_EFFECT_BREATHING -#define RGBLIGHT_EFFECT_RAINBOW_MOOD -#define RGBLIGHT_EFFECT_RAINBOW_SWIRL -#define RGBLIGHT_EFFECT_SNAKE -#define RGBLIGHT_EFFECT_KNIGHT -#define RGBLIGHT_EFFECT_RGB_TEST - /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 diff --git a/keyboards/dyz/dyz60/dyz60.h b/keyboards/dyz/dyz60/dyz60.h index bc3aae7afb..f933c243e5 100644 --- a/keyboards/dyz/dyz60/dyz60.h +++ b/keyboards/dyz/dyz60/dyz60.h @@ -18,16 +18,89 @@ #include "quantum.h" #define KNO KC_NO +/* + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ ┌───────┐ + * │00 │01 │02 │03 │04 │05 │45 │06 │07 │08 │09 │0A │0B │0C │0D │ │0C │ 2u Backspace + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤ └─┬─────┤ + * │10 │11 │12 │13 │14 │15 │16 │17 │18 │19 │1A │1B │1C │1D │ │ │ + * 2.25u ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ ┌──┴┐2D │ ISO Enter + * LShift │20 │21 │22 │23 │24 │25 │26 │27 │28 │29 │2A │2B │2C │ │2C │ │ + * ┌────────┐ ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤ ┌─┴───┴────┤ + * │30 │ │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3A │3B │3C │3D │ │3C │ 2.75u RShift + * └────────┘ ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬┴───┤ └──────────┘ + * │40 │41 │42 │46 │4A │4B │4C │4D │ + * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ + * ┌─────┬───┬─────┬───────────────────────────┬─────┬───┬─────┐ + * │40 │41 │42 │46 │4B │4C │4D │ Tsangan + * └─────┴───┴─────┴───────────────────────────┴─────┴───┴─────┘ + */ + #define LAYOUT_all( \ - K00, K01, K02, K03, K04, K05, K45, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K00, K01, K02, K03, K04, K05, K45, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ K40, K41, K42, K46, K4A, K4B, K4C, K4D \ ) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \ - { K40, K41, K42, KNO, KNO, K45, K46, KNO, KNO, KNO, K4A, K4B, K4C, K4D } \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \ + { K40, K41, K42, KNO, KNO, K45, K46, KNO, KNO, KNO, K4A, K4B, K4C, K4D } \ +} + +#define LAYOUT_60_ansi( \ + K00, K01, K02, K03, K04, K05, K45, K06, K07, K08, K09, K0A, K0B, K0C, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \ + K40, K41, K42, K46, K4A, K4B, K4C, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, KNO }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, KNO }, \ + { K30, KNO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, KNO }, \ + { K40, K41, K42, KNO, KNO, K45, K46, KNO, KNO, KNO, K4A, K4B, K4C, K4D } \ +} + +#define LAYOUT_60_ansi_split_bs_rshift( \ + K00, K01, K02, K03, K04, K05, K45, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ + K40, K41, K42, K46, K4A, K4B, K4C, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, KNO }, \ + { K30, KNO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \ + { K40, K41, K42, KNO, KNO, K45, K46, KNO, KNO, KNO, K4A, K4B, K4C, K4D } \ +} + +#define LAYOUT_60_iso( \ + K00, K01, K02, K03, K04, K05, K45, K06, K07, K08, K09, K0A, K0B, K0C, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \ + K40, K41, K42, K46, K4A, K4B, K4C, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, KNO }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, KNO }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, KNO }, \ + { K40, K41, K42, KNO, KNO, K45, K46, KNO, KNO, KNO, K4A, K4B, K4C, K4D } \ +} + +#define LAYOUT_60_iso_split_bs_rshift( \ + K00, K01, K02, K03, K04, K05, K45, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ + K40, K41, K42, K46, K4A, K4B, K4C, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, KNO }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \ + { K40, K41, K42, KNO, KNO, K45, K46, KNO, KNO, KNO, K4A, K4B, K4C, K4D } \ } diff --git a/keyboards/dyz/dyz60/info.json b/keyboards/dyz/dyz60/info.json index 9e8ea860c4..24ff257554 100644 --- a/keyboards/dyz/dyz60/info.json +++ b/keyboards/dyz/dyz60/info.json @@ -23,8 +23,360 @@ "device_ver": "0x0001" }, "layouts": { - "LAYOUT": { - "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"~", "x":13, "y":0}, {"label":"|", "x":14, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Win", "x":11, "y":4, "w":1.5}, {"label":"Menu", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}] + "LAYOUT_all": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"1!", "x":1, "y":0}, + {"label":"2@", "x":2, "y":0}, + {"label":"3#", "x":3, "y":0}, + {"label":"4$", "x":4, "y":0}, + {"label":"5%", "x":5, "y":0}, + {"label":"6^", "x":6, "y":0}, + {"label":"7&", "x":7, "y":0}, + {"label":"8*", "x":8, "y":0}, + {"label":"9(", "x":9, "y":0}, + {"label":"0)", "x":10, "y":0}, + {"label":"-_", "x":11, "y":0}, + {"label":"=+", "x":12, "y":0}, + {"label":"`~", "x":13, "y":0}, + {"label":"\\|", "x":14, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[{", "x":11.5, "y":1}, + {"label":"]}", "x":12.5, "y":1}, + {"label":"\\|", "x":13.5, "y":1, "w":1.5}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";:", "x":10.75, "y":2}, + {"label":"'\"", "x":11.75, "y":2}, + {"label":"#~", "x":12.75, "y":2}, + {"label":"Enter", "x":13.75, "y":2, "w":1.25}, + + {"label":"Shift", "x":0, "y":3, "w":1.25}, + {"label":"\\|", "x":1.25, "y":3}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",<", "x":9.25, "y":3}, + {"label":".>", "x":10.25, "y":3}, + {"label":"/?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"Fn", "x":14, "y":3}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"Win", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"label":"Space", "x":3.75, "y":4, "w":6.25}, + {"label":"Alt", "x":10, "y":4, "w":1.25}, + {"label":"Win", "x":11.25, "y":4, "w":1.25}, + {"label":"Menu", "x":12.5, "y":4, "w":1.25}, + {"label":"Ctrl", "x":13.75, "y":4, "w":1.25} + ] + }, + "LAYOUT_60_ansi": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"1!", "x":1, "y":0}, + {"label":"2@", "x":2, "y":0}, + {"label":"3#", "x":3, "y":0}, + {"label":"4$", "x":4, "y":0}, + {"label":"5%", "x":5, "y":0}, + {"label":"6^", "x":6, "y":0}, + {"label":"7&", "x":7, "y":0}, + {"label":"8*", "x":8, "y":0}, + {"label":"9(", "x":9, "y":0}, + {"label":"0)", "x":10, "y":0}, + {"label":"-_", "x":11, "y":0}, + {"label":"=+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0, "w":2}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[{", "x":11.5, "y":1}, + {"label":"]}", "x":12.5, "y":1}, + {"label":"\\|", "x":13.5, "y":1, "w":1.5}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";:", "x":10.75, "y":2}, + {"label":"'\"", "x":11.75, "y":2}, + {"label":"Enter", "x":12.75, "y":2, "w":2.25}, + + {"label":"Shift", "x":0, "y":3, "w":2.25}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",<", "x":9.25, "y":3}, + {"label":".>", "x":10.25, "y":3}, + {"label":"/?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":2.75}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"Win", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"label":"Space", "x":3.75, "y":4, "w":6.25}, + {"label":"Alt", "x":10, "y":4, "w":1.25}, + {"label":"Win", "x":11.25, "y":4, "w":1.25}, + {"label":"Menu", "x":12.5, "y":4, "w":1.25}, + {"label":"Ctrl", "x":13.75, "y":4, "w":1.25} + ] + }, + "LAYOUT_60_ansi_split_bs_rshift": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"1!", "x":1, "y":0}, + {"label":"2@", "x":2, "y":0}, + {"label":"3#", "x":3, "y":0}, + {"label":"4$", "x":4, "y":0}, + {"label":"5%", "x":5, "y":0}, + {"label":"6^", "x":6, "y":0}, + {"label":"7&", "x":7, "y":0}, + {"label":"8*", "x":8, "y":0}, + {"label":"9(", "x":9, "y":0}, + {"label":"0)", "x":10, "y":0}, + {"label":"-_", "x":11, "y":0}, + {"label":"=+", "x":12, "y":0}, + {"label":"`~", "x":13, "y":0}, + {"label":"\\|", "x":14, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[{", "x":11.5, "y":1}, + {"label":"]}", "x":12.5, "y":1}, + {"label":"\\|", "x":13.5, "y":1, "w":1.5}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";:", "x":10.75, "y":2}, + {"label":"'\"", "x":11.75, "y":2}, + {"label":"Enter", "x":12.75, "y":2, "w":2.25}, + + {"label":"Shift", "x":0, "y":3, "w":2.25}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",<", "x":9.25, "y":3}, + {"label":".>", "x":10.25, "y":3}, + {"label":"/?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"Fn", "x":14, "y":3}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"Win", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"label":"Space", "x":3.75, "y":4, "w":6.25}, + {"label":"Alt", "x":10, "y":4, "w":1.25}, + {"label":"Win", "x":11.25, "y":4, "w":1.25}, + {"label":"Menu", "x":12.5, "y":4, "w":1.25}, + {"label":"Ctrl", "x":13.75, "y":4, "w":1.25} + ] + }, + "LAYOUT_60_iso": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"1!", "x":1, "y":0}, + {"label":"2@", "x":2, "y":0}, + {"label":"3#", "x":3, "y":0}, + {"label":"4$", "x":4, "y":0}, + {"label":"5%", "x":5, "y":0}, + {"label":"6^", "x":6, "y":0}, + {"label":"7&", "x":7, "y":0}, + {"label":"8*", "x":8, "y":0}, + {"label":"9(", "x":9, "y":0}, + {"label":"0)", "x":10, "y":0}, + {"label":"-_", "x":11, "y":0}, + {"label":"=+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0, "w":2}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[{", "x":11.5, "y":1}, + {"label":"]}", "x":12.5, "y":1}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";:", "x":10.75, "y":2}, + {"label":"'\"", "x":11.75, "y":2}, + {"label":"#~", "x":12.75, "y":2}, + {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, + + {"label":"Shift", "x":0, "y":3, "w":1.25}, + {"label":"\\|", "x":1.25, "y":3}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",<", "x":9.25, "y":3}, + {"label":".>", "x":10.25, "y":3}, + {"label":"/?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":2.75}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"Win", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"label":"Space", "x":3.75, "y":4, "w":6.25}, + {"label":"Alt", "x":10, "y":4, "w":1.25}, + {"label":"Win", "x":11.25, "y":4, "w":1.25}, + {"label":"Menu", "x":12.5, "y":4, "w":1.25}, + {"label":"Ctrl", "x":13.75, "y":4, "w":1.25} + ] + }, + "LAYOUT_60_iso_split_bs_rshift": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"1!", "x":1, "y":0}, + {"label":"2@", "x":2, "y":0}, + {"label":"3#", "x":3, "y":0}, + {"label":"4$", "x":4, "y":0}, + {"label":"5%", "x":5, "y":0}, + {"label":"6^", "x":6, "y":0}, + {"label":"7&", "x":7, "y":0}, + {"label":"8*", "x":8, "y":0}, + {"label":"9(", "x":9, "y":0}, + {"label":"0)", "x":10, "y":0}, + {"label":"-_", "x":11, "y":0}, + {"label":"=+", "x":12, "y":0}, + {"label":"`~", "x":13, "y":0}, + {"label":"\\|", "x":14, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[{", "x":11.5, "y":1}, + {"label":"]}", "x":12.5, "y":1}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";:", "x":10.75, "y":2}, + {"label":"'\"", "x":11.75, "y":2}, + {"label":"#~", "x":12.75, "y":2}, + {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, + + {"label":"Shift", "x":0, "y":3, "w":1.25}, + {"label":"\\|", "x":1.25, "y":3}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",<", "x":9.25, "y":3}, + {"label":".>", "x":10.25, "y":3}, + {"label":"/?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"Fn", "x":14, "y":3}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"Win", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"label":"Space", "x":3.75, "y":4, "w":6.25}, + {"label":"Alt", "x":10, "y":4, "w":1.25}, + {"label":"Win", "x":11.25, "y":4, "w":1.25}, + {"label":"Menu", "x":12.5, "y":4, "w":1.25}, + {"label":"Ctrl", "x":13.75, "y":4, "w":1.25} + ] } } } diff --git a/keyboards/dyz/dyz60/keymaps/default/keymap.c b/keyboards/dyz/dyz60/keymaps/default/keymap.c index 62bb1a4075..4bebaf6b10 100644 --- a/keyboards/dyz/dyz60/keymaps/default/keymap.c +++ b/keyboards/dyz/dyz60/keymaps/default/keymap.c @@ -22,25 +22,25 @@ enum layer_names { }; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_BASE] = LAYOUT_all( /* Base */ - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT, - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FN), - KC_LCTL, KC_LWIN, KC_LALT, KC_SPC, KC_RALT, KC_RWIN, KC_MENU, KC_RCTL - ), - [_FN] = LAYOUT_all( - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_UP, KC_END, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_RIGHT, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DOWN, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______ - ), - [_FN2] = LAYOUT_all( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ) + [_BASE] = LAYOUT_all( /* Base */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FN), + KC_LCTL, KC_LWIN, KC_LALT, KC_SPC, KC_RALT, KC_RWIN, KC_MENU, KC_RCTL + ), + [_FN] = LAYOUT_all( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_UP, KC_END, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_RGHT, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DOWN, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______ + ), + [_FN2] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______ + ) }; diff --git a/keyboards/dyz/dyz60/keymaps/via/keymap.c b/keyboards/dyz/dyz60/keymaps/via/keymap.c index 62bb1a4075..4bebaf6b10 100644 --- a/keyboards/dyz/dyz60/keymaps/via/keymap.c +++ b/keyboards/dyz/dyz60/keymaps/via/keymap.c @@ -22,25 +22,25 @@ enum layer_names { }; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_BASE] = LAYOUT_all( /* Base */ - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT, - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FN), - KC_LCTL, KC_LWIN, KC_LALT, KC_SPC, KC_RALT, KC_RWIN, KC_MENU, KC_RCTL - ), - [_FN] = LAYOUT_all( - _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_UP, KC_END, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_RIGHT, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DOWN, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______ - ), - [_FN2] = LAYOUT_all( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ - ) + [_BASE] = LAYOUT_all( /* Base */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FN), + KC_LCTL, KC_LWIN, KC_LALT, KC_SPC, KC_RALT, KC_RWIN, KC_MENU, KC_RCTL + ), + [_FN] = LAYOUT_all( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_UP, KC_END, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_RGHT, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DOWN, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______ + ), + [_FN2] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______ + ) }; diff --git a/keyboards/dyz/dyz60/readme.md b/keyboards/dyz/dyz60/readme.md new file mode 100644 index 0000000000..5e436fdb28 --- /dev/null +++ b/keyboards/dyz/dyz60/readme.md @@ -0,0 +1,19 @@ +# dyz60 + +![dyz60 pcb](https://i.imgur.com/l9z5KuJh.jpg) + +60% layout has flexcut with multiple layout and mounting support. + +* Keyboard Maintainer: [dayatz](https://github.com/dayatz) +* Hardware Supported: dyz60, ATmega32U4 +* Hardware Availability: Local Indonesia GB. + +Make example for this keyboard (after setting up your build environment): + + make dyz/dyz60:default + +Flashing example for this keyboard: + + make dyz/dyz60:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). From e0d688d4c8040302fcacb735350c95fe6be4dbde Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Thu, 7 Oct 2021 23:14:26 +0100 Subject: [PATCH 215/595] Move converter specific tmk_core protocols (#14743) --- .../protocol => keyboards/converter/adb_usb}/adb.c | 4 ---- .../protocol => keyboards/converter/adb_usb}/adb.h | 0 keyboards/converter/adb_usb/matrix.c | 8 ++++++++ keyboards/converter/adb_usb/rules.mk | 3 +++ .../converter/m0110_usb}/m0110.c | 0 .../converter/m0110_usb}/m0110.h | 0 keyboards/converter/xt_usb/rules.mk | 3 +-- .../protocol => keyboards/converter/xt_usb}/xt.h | 0 .../converter/xt_usb}/xt_interrupt.c | 0 quantum/keyboard.c | 10 ---------- show_options.mk | 1 - tmk_core/protocol.mk | 9 --------- tmk_core/readme.md | 11 +++-------- 13 files changed, 15 insertions(+), 34 deletions(-) rename {tmk_core/protocol => keyboards/converter/adb_usb}/adb.c (99%) rename {tmk_core/protocol => keyboards/converter/adb_usb}/adb.h (100%) rename {tmk_core/protocol => keyboards/converter/m0110_usb}/m0110.c (100%) rename {tmk_core/protocol => keyboards/converter/m0110_usb}/m0110.h (100%) rename {tmk_core/protocol => keyboards/converter/xt_usb}/xt.h (100%) rename {tmk_core/protocol => keyboards/converter/xt_usb}/xt_interrupt.c (100%) diff --git a/tmk_core/protocol/adb.c b/keyboards/converter/adb_usb/adb.c similarity index 99% rename from tmk_core/protocol/adb.c rename to keyboards/converter/adb_usb/adb.c index 367f1b09fa..28f14c9fe8 100644 --- a/tmk_core/protocol/adb.c +++ b/keyboards/converter/adb_usb/adb.c @@ -84,10 +84,6 @@ bool adb_host_psw(void) { return psw_in(); } uint16_t adb_host_kbd_recv(void) { return adb_host_talk(ADB_ADDR_KEYBOARD, ADB_REG_0); } #ifdef ADB_MOUSE_ENABLE -__attribute__((weak)) void adb_mouse_init(void) { return; } - -__attribute__((weak)) void adb_mouse_task(void) { return; } - uint16_t adb_host_mouse_recv(void) { return adb_host_talk(ADB_ADDR_MOUSE, ADB_REG_0); } #endif diff --git a/tmk_core/protocol/adb.h b/keyboards/converter/adb_usb/adb.h similarity index 100% rename from tmk_core/protocol/adb.h rename to keyboards/converter/adb_usb/adb.h diff --git a/keyboards/converter/adb_usb/matrix.c b/keyboards/converter/adb_usb/matrix.c index 9e5399de5d..e6a4921960 100644 --- a/keyboards/converter/adb_usb/matrix.c +++ b/keyboards/converter/adb_usb/matrix.c @@ -31,6 +31,10 @@ Ported to QMK by Peter Roe #include "led.h" #include "timer.h" +#ifndef ADB_MOUSE_MAXACC +# define ADB_MOUSE_MAXACC 8 +#endif + static bool is_iso_layout = false; // matrix state buffer(1:on, 0:off) @@ -84,6 +88,10 @@ void matrix_init(void) static report_mouse_t mouse_report = {}; +void housekeeping_task_kb(void) { + adb_mouse_task(); +} + void adb_mouse_task(void) { uint16_t codes; diff --git a/keyboards/converter/adb_usb/rules.mk b/keyboards/converter/adb_usb/rules.mk index 7c861e2702..8f4649f556 100644 --- a/keyboards/converter/adb_usb/rules.mk +++ b/keyboards/converter/adb_usb/rules.mk @@ -19,3 +19,6 @@ BACKLIGHT_ENABLE = no CUSTOM_MATRIX = yes SRC = matrix.c adb.c led.c + +# ADB_MOUSE_ENABLE +# OPT_DEFS += -DADB_MOUSE_ENABLE -DMOUSE_ENABLE diff --git a/tmk_core/protocol/m0110.c b/keyboards/converter/m0110_usb/m0110.c similarity index 100% rename from tmk_core/protocol/m0110.c rename to keyboards/converter/m0110_usb/m0110.c diff --git a/tmk_core/protocol/m0110.h b/keyboards/converter/m0110_usb/m0110.h similarity index 100% rename from tmk_core/protocol/m0110.h rename to keyboards/converter/m0110_usb/m0110.h diff --git a/keyboards/converter/xt_usb/rules.mk b/keyboards/converter/xt_usb/rules.mk index 519d76f4d4..8033614447 100644 --- a/keyboards/converter/xt_usb/rules.mk +++ b/keyboards/converter/xt_usb/rules.mk @@ -19,7 +19,6 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -XT_ENABLE = yes CUSTOM_MATRIX = yes -SRC += matrix.c +SRC += matrix.c xt_interrupt.c diff --git a/tmk_core/protocol/xt.h b/keyboards/converter/xt_usb/xt.h similarity index 100% rename from tmk_core/protocol/xt.h rename to keyboards/converter/xt_usb/xt.h diff --git a/tmk_core/protocol/xt_interrupt.c b/keyboards/converter/xt_usb/xt_interrupt.c similarity index 100% rename from tmk_core/protocol/xt_interrupt.c rename to keyboards/converter/xt_usb/xt_interrupt.c diff --git a/quantum/keyboard.c b/quantum/keyboard.c index ee7fa2bd4b..401abdd8fa 100644 --- a/quantum/keyboard.c +++ b/quantum/keyboard.c @@ -43,9 +43,6 @@ along with this program. If not, see . #ifdef SERIAL_MOUSE_ENABLE # include "serial_mouse.h" #endif -#ifdef ADB_MOUSE_ENABLE -# include "adb.h" -#endif #ifdef RGBLIGHT_ENABLE # include "rgblight.h" #endif @@ -322,9 +319,6 @@ void keyboard_init(void) { #ifdef SERIAL_MOUSE_ENABLE serial_mouse_init(); #endif -#ifdef ADB_MOUSE_ENABLE - adb_mouse_init(); -#endif #ifdef BACKLIGHT_ENABLE backlight_init(); #endif @@ -504,10 +498,6 @@ MATRIX_LOOP_END: serial_mouse_task(); #endif -#ifdef ADB_MOUSE_ENABLE - adb_mouse_task(); -#endif - #ifdef POINTING_DEVICE_ENABLE pointing_device_task(); #endif diff --git a/show_options.mk b/show_options.mk index 0831069635..e0d7c9b072 100644 --- a/show_options.mk +++ b/show_options.mk @@ -71,7 +71,6 @@ OTHER_OPTION_NAMES = \ SWAP_HANDS_ENABLE \ RING_BUFFERED_6KRO_REPORT_ENABLE \ WATCHDOG_ENABLE \ - XT_ENABLE \ ERGOINU \ NO_USB_STARTUP_CHECK \ DISABLE_PROMICRO_LEDs \ diff --git a/tmk_core/protocol.mk b/tmk_core/protocol.mk index b61f2f5463..30c87a0f12 100644 --- a/tmk_core/protocol.mk +++ b/tmk_core/protocol.mk @@ -45,15 +45,6 @@ ifeq ($(strip $(SERIAL_MOUSE_USE_UART)), yes) SRC += $(PROTOCOL_DIR)/serial_uart.c endif -ifeq ($(strip $(ADB_MOUSE_ENABLE)), yes) - OPT_DEFS += -DADB_MOUSE_ENABLE -DMOUSE_ENABLE -endif - -ifeq ($(strip $(XT_ENABLE)), yes) - SRC += $(PROTOCOL_DIR)/xt_interrupt.c - OPT_DEFS += -DXT_ENABLE -endif - ifeq ($(strip $(USB_HID_ENABLE)), yes) include $(TMK_DIR)/protocol/usb_hid.mk endif diff --git a/tmk_core/readme.md b/tmk_core/readme.md index a754cfee42..a47dc88185 100644 --- a/tmk_core/readme.md +++ b/tmk_core/readme.md @@ -25,7 +25,6 @@ These features can be used in your keyboard. * Media Control Key - Volume Down/Up, Mute, Next/Prev track, Play, Stop and etc * USB NKRO - 248 keys(+ 8 modifiers) simultaneously * PS/2 mouse support - PS/2 mouse(TrackPoint) as composite device -* Keyboard protocols - PS/2, ADB, M0110, Sun and other old keyboard protocols * User Function - Customizable function of key with writing code * Macro - Very primitive at this time * Keyboard Tricks - Oneshot modifier and modifier with tapping feature @@ -84,9 +83,9 @@ Architecture / /| Keys/Mouse | Protocol |d| | Action | | | Protocol | /__________/ |<-----------| LUFA |r| | Layer, Tap | | | Matrix | |.--------.| | LED | V-USB |i| |-------------| | | PS/2,IBM | __________________ - || || |----------->| UART |v| | Keymap | | | ADB,M0110| Keys / /_/_/_/_/_/_/_/ /| - || Host || | Console | |e| | Mousekey | | | SUN/NEWS |<----------/ /_/_/_/_/_/_/_/ / / - ||________||/.<-----------| |r| | Report | | | X68K/PC98| Control / /_/_/_/_/_/_/_/ / / + || || |----------->| UART |v| | Keymap | | | | Keys / /_/_/_/_/_/_/_/ /| + || Host || | Console | |e| | Mousekey | | | |<----------/ /_/_/_/_/_/_/_/ / / + ||________||/.<-----------| |r| | Report | | | | Control / /_/_/_/_/_/_/_/ / / `_========_'/| |---------------------------------------------|-------->/___ /_______/ ___/ / |_o______o_|/ | Sendchar, Print, Debug, Command, ... | |_________________|/ +---------------------------------------------+ Keyboard @@ -134,10 +133,6 @@ Files and Directories * lufa/ - LUFA USB stack * vusb/ - Objective Development V-USB * ps2.c - PS/2 protocol -* adb.c - Apple Desktop Bus protocol -* m0110.c - Macintosh 128K/512K/Plus keyboard protocol -* news.c - Sony NEWS keyboard protocol -* x68k.c - Sharp X68000 keyboard protocol * serial_soft.c - Asynchronous Serial protocol implemented by software From 9d070e6a08327f54e60e4fd31ed31cdc416606ba Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Fri, 8 Oct 2021 00:26:38 +0000 Subject: [PATCH 216/595] DYZ TKL touch-up (#14744) * friendly-format info.json * add LAYOUT_all layout data * add matrix diagram to dyz_tkl.h * add LAYOUT_tkl_ansi * add LAYOUT_tkl_ansi_f13 * add LAYOUT_tkl_iso * add LAYOUT_tkl_iso_f13 * remove `ENCODER_ENABLE = no` from rules.mk * remove redundant definitions from config.h Data-driven compilation calculates `MATRIX_ROWS` and `MATRIX_COLS` from the info.json data, so defining them in config.h isn't necessary. * add missing comma to info.json per fauxpark --- keyboards/dyz/dyz_tkl/config.h | 5 - keyboards/dyz/dyz_tkl/dyz_tkl.h | 135 ++++++++- keyboards/dyz/dyz_tkl/info.json | 490 +++++++++++++++++++++++++++++++- keyboards/dyz/dyz_tkl/rules.mk | 1 - 4 files changed, 611 insertions(+), 20 deletions(-) diff --git a/keyboards/dyz/dyz_tkl/config.h b/keyboards/dyz/dyz_tkl/config.h index 22f17d403f..c872680e64 100644 --- a/keyboards/dyz/dyz_tkl/config.h +++ b/keyboards/dyz/dyz_tkl/config.h @@ -23,11 +23,6 @@ along with this program. If not, see . #define MANUFACTURER dyz #define PRODUCT dyz_TKL -/* key matrix size */ -#define MATRIX_ROWS 12 -#define MATRIX_COLS 9 - - /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 diff --git a/keyboards/dyz/dyz_tkl/dyz_tkl.h b/keyboards/dyz/dyz_tkl/dyz_tkl.h index b891b74813..1ad6272070 100644 --- a/keyboards/dyz/dyz_tkl/dyz_tkl.h +++ b/keyboards/dyz/dyz_tkl/dyz_tkl.h @@ -18,6 +18,29 @@ #include "quantum.h" #define _X_ KC_NO +/* + * ┌───┐┌───┬───┬───┬───┐┌───┬───┬───┬───┐┌───┬───┬───┬───┐┌───┐┌───┬───┬───┐ + * │00 ││10 │01 │11 │02 ││12 │03 │13 │04 ││14 │05 │06 │16 ││07 ││17 │08 │18 │ F13 Function Row + * └───┘└───┴───┴───┴───┘└───┴───┴───┴───┘└───┴───┴───┴───┘└───┘└───┴───┴───┘ + * ┌───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐┌───┬───┬───┐ + * │00 │ │01 │11 │02 │12 │ │03 │13 │04 │14 │ │05 │06 │16 │07 ││17 │08 │18 │ + * └───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘└───┴───┴───┘ + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐┌───┬───┬───┐ ┌───────┐ + * │20 │30 │21 │31 │22 │32 │23 │33 │24 │34 │25 │35 │26 │36 │27 ││37 │28 │38 │ │36 │ 2u Backspace + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤├───┼───┼───┤ └─┬─────┤ + * │40 │50 │41 │51 │42 │52 │53 │44 │54 │45 │55 │46 │56 │47 ││57 │48 │58 │ │ │ + * 2.25u ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤└───┴───┴───┘ ┌──┴┐67 │ ISO Enter + * LShift │60 │70 │61 │71 │62 │72 │73 │64 │74 │65 │75 │66 │76 │ │76 │ │ + * ┌────────┐ ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤ ┌───┐ ┌─┴───┴────┤ + * │80 │ │80 │90 │81 │91 │82 │92 │93 │84 │94 │85 │95 │86 │96 │87 │ │88 │ │96 │ 2.75u RShift + * └────────┘ ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬┴───┤┌───┼───┼───┐ └──────────┘ + * │A0 │B0 │A1 │B3 │B5 │A6 │B6 │A7 ││B7 │A8 │B8 │ + * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘└───┴───┴───┘ + * ┌─────┬───┬─────┬───────────────────────────┬─────┬───┬─────┐ + * │A0 │B0 │A1 │B3 │A6 │B6 │A7 │ Tsangan + * └─────┴───┴─────┴───────────────────────────┴─────┴───┴─────┘ + */ + #define LAYOUT_all( \ K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K06, K16, K07, K17, K08, K18, \ K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K26, K36, K27, K37, K28, K38, \ @@ -26,16 +49,104 @@ K80, K90, K81, K91, K82, K92, K93, K84, K94, K85, K95, K86, K96, K87, K88, \ KA0, KB0, KA1, KB3, KB5, KA6, KB6, KA7, KB7, KA8, KB8 \ ) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08 }, \ - { K10, K11, K12, K13, K14, _X_, K16, K17, K18 }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28 }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38 }, \ - { K40, K41, K42, _X_, K44, K45, K46, K47, K48 }, \ - { K50, K51, K52, K53, K54, K55, K56, K57, K58 }, \ - { K60, K61, K62, _X_, K64, K65, K66, K67, _X_ }, \ - { K70, K71, K72, K73, K74, K75, K76, _X_, _X_ }, \ - { K80, K81, K82, _X_, K84, K85, K86, K87, K88 }, \ - { K90, K91, K92, K93, K94, K95, K96, _X_, _X_ }, \ - { KA0, KA1, _X_, _X_, _X_, _X_, KA6, KA7, KA8 }, \ - { KB0, _X_, _X_, KB3, _X_, KB5, KB6, KB7, KB8 } \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08 }, \ + { K10, K11, K12, K13, K14, _X_, K16, K17, K18 }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28 }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38 }, \ + { K40, K41, K42, _X_, K44, K45, K46, K47, K48 }, \ + { K50, K51, K52, K53, K54, K55, K56, K57, K58 }, \ + { K60, K61, K62, _X_, K64, K65, K66, K67, _X_ }, \ + { K70, K71, K72, K73, K74, K75, K76, _X_, _X_ }, \ + { K80, K81, K82, _X_, K84, K85, K86, K87, K88 }, \ + { K90, K91, K92, K93, K94, K95, K96, _X_, _X_ }, \ + { KA0, KA1, _X_, _X_, _X_, _X_, KA6, KA7, KA8 }, \ + { KB0, _X_, _X_, KB3, _X_, KB5, KB6, KB7, KB8 } \ +} + +#define LAYOUT_tkl_ansi( \ + K00, K01, K11, K02, K12, K03, K13, K04, K14, K05, K06, K16, K07, K17, K08, K18, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K26, K36, K37, K28, K38, \ + K40, K50, K41, K51, K42, K52, K53, K44, K54, K45, K55, K46, K56, K47, K57, K48, K58, \ + K60, K70, K61, K71, K62, K72, K73, K64, K74, K65, K75, K66, K76, \ + K80, K81, K91, K82, K92, K93, K84, K94, K85, K95, K86, K96, K88, \ + KA0, KB0, KA1, KB3, KB5, KA6, KB6, KA7, KB7, KA8, KB8 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08 }, \ + { _X_, K11, K12, K13, K14, _X_, K16, K17, K18 }, \ + { K20, K21, K22, K23, K24, K25, K26, _X_, K28 }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38 }, \ + { K40, K41, K42, _X_, K44, K45, K46, K47, K48 }, \ + { K50, K51, K52, K53, K54, K55, K56, K57, K58 }, \ + { K60, K61, K62, _X_, K64, K65, K66, _X_, _X_ }, \ + { K70, K71, K72, K73, K74, K75, K76, _X_, _X_ }, \ + { K80, K81, K82, _X_, K84, K85, K86, _X_, K88 }, \ + { _X_, K91, K92, K93, K94, K95, K96, _X_, _X_ }, \ + { KA0, KA1, _X_, _X_, _X_, _X_, KA6, KA7, KA8 }, \ + { KB0, _X_, _X_, KB3, _X_, KB5, KB6, KB7, KB8 } \ +} + +#define LAYOUT_tkl_ansi_f13( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K06, K16, K07, K17, K08, K18, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K26, K36, K37, K28, K38, \ + K40, K50, K41, K51, K42, K52, K53, K44, K54, K45, K55, K46, K56, K47, K57, K48, K58, \ + K60, K70, K61, K71, K62, K72, K73, K64, K74, K65, K75, K66, K76, \ + K80, K81, K91, K82, K92, K93, K84, K94, K85, K95, K86, K96, K88, \ + KA0, KB0, KA1, KB3, KB5, KA6, KB6, KA7, KB7, KA8, KB8 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08 }, \ + { K10, K11, K12, K13, K14, _X_, K16, K17, K18 }, \ + { K20, K21, K22, K23, K24, K25, K26, _X_, K28 }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38 }, \ + { K40, K41, K42, _X_, K44, K45, K46, K47, K48 }, \ + { K50, K51, K52, K53, K54, K55, K56, K57, K58 }, \ + { K60, K61, K62, _X_, K64, K65, K66, _X_, _X_ }, \ + { K70, K71, K72, K73, K74, K75, K76, _X_, _X_ }, \ + { K80, K81, K82, _X_, K84, K85, K86, _X_, K88 }, \ + { _X_, K91, K92, K93, K94, K95, K96, _X_, _X_ }, \ + { KA0, KA1, _X_, _X_, _X_, _X_, KA6, KA7, KA8 }, \ + { KB0, _X_, _X_, KB3, _X_, KB5, KB6, KB7, KB8 } \ +} + +#define LAYOUT_tkl_iso( \ + K00, K01, K11, K02, K12, K03, K13, K04, K14, K05, K06, K16, K07, K17, K08, K18, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K26, K36, K37, K28, K38, \ + K40, K50, K41, K51, K42, K52, K53, K44, K54, K45, K55, K46, K56, K57, K48, K58, \ + K60, K70, K61, K71, K62, K72, K73, K64, K74, K65, K75, K66, K76, K67, \ + K80, K90, K81, K91, K82, K92, K93, K84, K94, K85, K95, K86, K96, K88, \ + KA0, KB0, KA1, KB3, KB5, KA6, KB6, KA7, KB7, KA8, KB8 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08 }, \ + { _X_, K11, K12, K13, K14, _X_, K16, K17, K18 }, \ + { K20, K21, K22, K23, K24, K25, K26, _X_, K28 }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38 }, \ + { K40, K41, K42, _X_, K44, K45, K46, _X_, K48 }, \ + { K50, K51, K52, K53, K54, K55, K56, K57, K58 }, \ + { K60, K61, K62, _X_, K64, K65, K66, K67, _X_ }, \ + { K70, K71, K72, K73, K74, K75, K76, _X_, _X_ }, \ + { K80, K81, K82, _X_, K84, K85, K86, _X_, K88 }, \ + { K90, K91, K92, K93, K94, K95, K96, _X_, _X_ }, \ + { KA0, KA1, _X_, _X_, _X_, _X_, KA6, KA7, KA8 }, \ + { KB0, _X_, _X_, KB3, _X_, KB5, KB6, KB7, KB8 } \ +} + +#define LAYOUT_tkl_iso_f13( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K06, K16, K07, K17, K08, K18, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K26, K36, K37, K28, K38, \ + K40, K50, K41, K51, K42, K52, K53, K44, K54, K45, K55, K46, K56, K57, K48, K58, \ + K60, K70, K61, K71, K62, K72, K73, K64, K74, K65, K75, K66, K76, K67, \ + K80, K90, K81, K91, K82, K92, K93, K84, K94, K85, K95, K86, K96, K88, \ + KA0, KB0, KA1, KB3, KB5, KA6, KB6, KA7, KB7, KA8, KB8 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08 }, \ + { K10, K11, K12, K13, K14, _X_, K16, K17, K18 }, \ + { K20, K21, K22, K23, K24, K25, K26, _X_, K28 }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38 }, \ + { K40, K41, K42, _X_, K44, K45, K46, _X_, K48 }, \ + { K50, K51, K52, K53, K54, K55, K56, K57, K58 }, \ + { K60, K61, K62, _X_, K64, K65, K66, K67, _X_ }, \ + { K70, K71, K72, K73, K74, K75, K76, _X_, _X_ }, \ + { K80, K81, K82, _X_, K84, K85, K86, _X_, K88 }, \ + { K90, K91, K92, K93, K94, K95, K96, _X_, _X_ }, \ + { KA0, KA1, _X_, _X_, _X_, _X_, KA6, KA7, KA8 }, \ + { KB0, _X_, _X_, KB3, _X_, KB5, KB6, KB7, KB8 } \ } diff --git a/keyboards/dyz/dyz_tkl/info.json b/keyboards/dyz/dyz_tkl/info.json index 98e7fb94ef..615bc197a0 100644 --- a/keyboards/dyz/dyz_tkl/info.json +++ b/keyboards/dyz/dyz_tkl/info.json @@ -20,8 +20,494 @@ "device_ver": "0x0001" }, "layouts": { - "LAYOUT": { - "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"label":"Backspace", "x":13, "y":1.25, "w":2}, {"label":"Insert", "x":15.25, "y":1.25}, {"label":"Home", "x":16.25, "y":1.25}, {"label":"PgUp", "x":17.25, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"{", "x":11.5, "y":2.25}, {"label":"}", "x":12.5, "y":2.25}, {"label":"|", "x":13.5, "y":2.25, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.25}, {"label":"End", "x":16.25, "y":2.25}, {"label":"PgDn", "x":17.25, "y":2.25}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":":", "x":10.75, "y":3.25}, {"label":"\"", "x":11.75, "y":3.25}, {"label":"Enter", "x":12.75, "y":3.25, "w":2.25}, {"label":"Shift", "x":0, "y":4.25, "w":2.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.25}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.25}, {"label":"Win", "x":1.25, "y":5.25, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.25}, {"x":3.75, "y":5.25, "w":6.25}, {"label":"Alt", "x":10, "y":5.25, "w":1.25}, {"label":"Win", "x":11.25, "y":5.25, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.25, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.25, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.25}, {"label":"\u2193", "x":16.25, "y":5.25}, {"label":"\u2192", "x":17.25, "y":5.25}] + "LAYOUT_all": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":1.25, "y":0}, + {"label":"F2", "x":2.25, "y":0}, + {"label":"F3", "x":3.25, "y":0}, + {"label":"F4", "x":4.25, "y":0}, + {"label":"F5", "x":5.5, "y":0}, + {"label":"F6", "x":6.5, "y":0}, + {"label":"F7", "x":7.5, "y":0}, + {"label":"F8", "x":8.5, "y":0}, + {"label":"F9", "x":9.75, "y":0}, + {"label":"F10", "x":10.75, "y":0}, + {"label":"F11", "x":11.75, "y":0}, + {"label":"F12", "x":12.75, "y":0}, + {"label":"F13", "x":14, "y":0}, + {"label":"PrtSc", "x":15.25, "y":0}, + {"label":"Scroll Lock", "x":16.25, "y":0}, + {"label":"Pause", "x":17.25, "y":0}, + + {"label":"~", "x":0, "y":1.25}, + {"label":"!", "x":1, "y":1.25}, + {"label":"@", "x":2, "y":1.25}, + {"label":"#", "x":3, "y":1.25}, + {"label":"$", "x":4, "y":1.25}, + {"label":"%", "x":5, "y":1.25}, + {"label":"^", "x":6, "y":1.25}, + {"label":"&", "x":7, "y":1.25}, + {"label":"*", "x":8, "y":1.25}, + {"label":"(", "x":9, "y":1.25}, + {"label":")", "x":10, "y":1.25}, + {"label":"_", "x":11, "y":1.25}, + {"label":"+", "x":12, "y":1.25}, + {"label":"Backspace", "x":13, "y":1.25}, + {"label":"Backspace", "x":14, "y":1.25}, + {"label":"Insert", "x":15.25, "y":1.25}, + {"label":"Home", "x":16.25, "y":1.25}, + {"label":"PgUp", "x":17.25, "y":1.25}, + + {"label":"Tab", "x":0, "y":2.25, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.25}, + {"label":"W", "x":2.5, "y":2.25}, + {"label":"E", "x":3.5, "y":2.25}, + {"label":"R", "x":4.5, "y":2.25}, + {"label":"T", "x":5.5, "y":2.25}, + {"label":"Y", "x":6.5, "y":2.25}, + {"label":"U", "x":7.5, "y":2.25}, + {"label":"I", "x":8.5, "y":2.25}, + {"label":"O", "x":9.5, "y":2.25}, + {"label":"P", "x":10.5, "y":2.25}, + {"label":"{", "x":11.5, "y":2.25}, + {"label":"}", "x":12.5, "y":2.25}, + {"label":"|", "x":13.5, "y":2.25, "w":1.5}, + {"label":"Delete", "x":15.25, "y":2.25}, + {"label":"End", "x":16.25, "y":2.25}, + {"label":"PgDn", "x":17.25, "y":2.25}, + + {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, + {"label":"A", "x":1.75, "y":3.25}, + {"label":"S", "x":2.75, "y":3.25}, + {"label":"D", "x":3.75, "y":3.25}, + {"label":"F", "x":4.75, "y":3.25}, + {"label":"G", "x":5.75, "y":3.25}, + {"label":"H", "x":6.75, "y":3.25}, + {"label":"J", "x":7.75, "y":3.25}, + {"label":"K", "x":8.75, "y":3.25}, + {"label":"L", "x":9.75, "y":3.25}, + {"label":":", "x":10.75, "y":3.25}, + {"label":"\"", "x":11.75, "y":3.25}, + {"label":"~", "x":12.75, "y":3.25}, + {"label":"Enter", "x":13.75, "y":3.25, "w":1.25}, + + {"label":"Shift", "x":0, "y":4.25, "w":1.25}, + {"label":"|", "x":1.25, "y":4.25}, + {"label":"Z", "x":2.25, "y":4.25}, + {"label":"X", "x":3.25, "y":4.25}, + {"label":"C", "x":4.25, "y":4.25}, + {"label":"V", "x":5.25, "y":4.25}, + {"label":"B", "x":6.25, "y":4.25}, + {"label":"N", "x":7.25, "y":4.25}, + {"label":"M", "x":8.25, "y":4.25}, + {"label":"<", "x":9.25, "y":4.25}, + {"label":">", "x":10.25, "y":4.25}, + {"label":"?", "x":11.25, "y":4.25}, + {"label":"Shift", "x":12.25, "y":4.25, "w":1.75}, + {"label":"Shift", "x":14, "y":4.25}, + {"label":"\u2191", "x":16.25, "y":4.25}, + + {"label":"Ctrl", "x":0, "y":5.25, "w":1.25}, + {"label":"Win", "x":1.25, "y":5.25, "w":1.25}, + {"label":"Alt", "x":2.5, "y":5.25, "w":1.25}, + {"x":3.75, "y":5.25, "w":6.25}, + {"label":"Alt", "x":10, "y":5.25, "w":1.25}, + {"label":"Win", "x":11.25, "y":5.25, "w":1.25}, + {"label":"Menu", "x":12.5, "y":5.25, "w":1.25}, + {"label":"Ctrl", "x":13.75, "y":5.25, "w":1.25}, + {"label":"\u2190", "x":15.25, "y":5.25}, + {"label":"\u2193", "x":16.25, "y":5.25}, + {"label":"\u2192", "x":17.25, "y":5.25} + ] + }, + "LAYOUT_tkl_ansi": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":2, "y":0}, + {"label":"F2", "x":3, "y":0}, + {"label":"F3", "x":4, "y":0}, + {"label":"F4", "x":5, "y":0}, + {"label":"F5", "x":6.5, "y":0}, + {"label":"F6", "x":7.5, "y":0}, + {"label":"F7", "x":8.5, "y":0}, + {"label":"F8", "x":9.5, "y":0}, + {"label":"F9", "x":11, "y":0}, + {"label":"F10", "x":12, "y":0}, + {"label":"F11", "x":13, "y":0}, + {"label":"F12", "x":14, "y":0}, + {"label":"PrtSc", "x":15.25, "y":0}, + {"label":"Scroll Lock", "x":16.25, "y":0}, + {"label":"Pause", "x":17.25, "y":0}, + + {"label":"~", "x":0, "y":1.25}, + {"label":"!", "x":1, "y":1.25}, + {"label":"@", "x":2, "y":1.25}, + {"label":"#", "x":3, "y":1.25}, + {"label":"$", "x":4, "y":1.25}, + {"label":"%", "x":5, "y":1.25}, + {"label":"^", "x":6, "y":1.25}, + {"label":"&", "x":7, "y":1.25}, + {"label":"*", "x":8, "y":1.25}, + {"label":"(", "x":9, "y":1.25}, + {"label":")", "x":10, "y":1.25}, + {"label":"_", "x":11, "y":1.25}, + {"label":"+", "x":12, "y":1.25}, + {"label":"Backspace", "x":13, "y":1.25, "w":2}, + {"label":"Insert", "x":15.25, "y":1.25}, + {"label":"Home", "x":16.25, "y":1.25}, + {"label":"PgUp", "x":17.25, "y":1.25}, + + {"label":"Tab", "x":0, "y":2.25, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.25}, + {"label":"W", "x":2.5, "y":2.25}, + {"label":"E", "x":3.5, "y":2.25}, + {"label":"R", "x":4.5, "y":2.25}, + {"label":"T", "x":5.5, "y":2.25}, + {"label":"Y", "x":6.5, "y":2.25}, + {"label":"U", "x":7.5, "y":2.25}, + {"label":"I", "x":8.5, "y":2.25}, + {"label":"O", "x":9.5, "y":2.25}, + {"label":"P", "x":10.5, "y":2.25}, + {"label":"{", "x":11.5, "y":2.25}, + {"label":"}", "x":12.5, "y":2.25}, + {"label":"|", "x":13.5, "y":2.25, "w":1.5}, + {"label":"Delete", "x":15.25, "y":2.25}, + {"label":"End", "x":16.25, "y":2.25}, + {"label":"PgDn", "x":17.25, "y":2.25}, + + {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, + {"label":"A", "x":1.75, "y":3.25}, + {"label":"S", "x":2.75, "y":3.25}, + {"label":"D", "x":3.75, "y":3.25}, + {"label":"F", "x":4.75, "y":3.25}, + {"label":"G", "x":5.75, "y":3.25}, + {"label":"H", "x":6.75, "y":3.25}, + {"label":"J", "x":7.75, "y":3.25}, + {"label":"K", "x":8.75, "y":3.25}, + {"label":"L", "x":9.75, "y":3.25}, + {"label":":", "x":10.75, "y":3.25}, + {"label":"\"", "x":11.75, "y":3.25}, + {"label":"Enter", "x":12.75, "y":3.25, "w":2.25}, + + {"label":"Shift", "x":0, "y":4.25, "w":2.25}, + {"label":"Z", "x":2.25, "y":4.25}, + {"label":"X", "x":3.25, "y":4.25}, + {"label":"C", "x":4.25, "y":4.25}, + {"label":"V", "x":5.25, "y":4.25}, + {"label":"B", "x":6.25, "y":4.25}, + {"label":"N", "x":7.25, "y":4.25}, + {"label":"M", "x":8.25, "y":4.25}, + {"label":"<", "x":9.25, "y":4.25}, + {"label":">", "x":10.25, "y":4.25}, + {"label":"?", "x":11.25, "y":4.25}, + {"label":"Shift", "x":12.25, "y":4.25, "w":2.75}, + {"label":"\u2191", "x":16.25, "y":4.25}, + + {"label":"Ctrl", "x":0, "y":5.25, "w":1.25}, + {"label":"Win", "x":1.25, "y":5.25, "w":1.25}, + {"label":"Alt", "x":2.5, "y":5.25, "w":1.25}, + {"x":3.75, "y":5.25, "w":6.25}, + {"label":"Alt", "x":10, "y":5.25, "w":1.25}, + {"label":"Win", "x":11.25, "y":5.25, "w":1.25}, + {"label":"Menu", "x":12.5, "y":5.25, "w":1.25}, + {"label":"Ctrl", "x":13.75, "y":5.25, "w":1.25}, + {"label":"\u2190", "x":15.25, "y":5.25}, + {"label":"\u2193", "x":16.25, "y":5.25}, + {"label":"\u2192", "x":17.25, "y":5.25} + ] + }, + "LAYOUT_tkl_ansi_f13": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":1.25, "y":0}, + {"label":"F2", "x":2.25, "y":0}, + {"label":"F3", "x":3.25, "y":0}, + {"label":"F4", "x":4.25, "y":0}, + {"label":"F5", "x":5.5, "y":0}, + {"label":"F6", "x":6.5, "y":0}, + {"label":"F7", "x":7.5, "y":0}, + {"label":"F8", "x":8.5, "y":0}, + {"label":"F9", "x":9.75, "y":0}, + {"label":"F10", "x":10.75, "y":0}, + {"label":"F11", "x":11.75, "y":0}, + {"label":"F12", "x":12.75, "y":0}, + {"label":"F13", "x":14, "y":0}, + {"label":"PrtSc", "x":15.25, "y":0}, + {"label":"Scroll Lock", "x":16.25, "y":0}, + {"label":"Pause", "x":17.25, "y":0}, + + {"label":"~", "x":0, "y":1.25}, + {"label":"!", "x":1, "y":1.25}, + {"label":"@", "x":2, "y":1.25}, + {"label":"#", "x":3, "y":1.25}, + {"label":"$", "x":4, "y":1.25}, + {"label":"%", "x":5, "y":1.25}, + {"label":"^", "x":6, "y":1.25}, + {"label":"&", "x":7, "y":1.25}, + {"label":"*", "x":8, "y":1.25}, + {"label":"(", "x":9, "y":1.25}, + {"label":")", "x":10, "y":1.25}, + {"label":"_", "x":11, "y":1.25}, + {"label":"+", "x":12, "y":1.25}, + {"label":"Backspace", "x":13, "y":1.25, "w":2}, + {"label":"Insert", "x":15.25, "y":1.25}, + {"label":"Home", "x":16.25, "y":1.25}, + {"label":"PgUp", "x":17.25, "y":1.25}, + + {"label":"Tab", "x":0, "y":2.25, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.25}, + {"label":"W", "x":2.5, "y":2.25}, + {"label":"E", "x":3.5, "y":2.25}, + {"label":"R", "x":4.5, "y":2.25}, + {"label":"T", "x":5.5, "y":2.25}, + {"label":"Y", "x":6.5, "y":2.25}, + {"label":"U", "x":7.5, "y":2.25}, + {"label":"I", "x":8.5, "y":2.25}, + {"label":"O", "x":9.5, "y":2.25}, + {"label":"P", "x":10.5, "y":2.25}, + {"label":"{", "x":11.5, "y":2.25}, + {"label":"}", "x":12.5, "y":2.25}, + {"label":"|", "x":13.5, "y":2.25, "w":1.5}, + {"label":"Delete", "x":15.25, "y":2.25}, + {"label":"End", "x":16.25, "y":2.25}, + {"label":"PgDn", "x":17.25, "y":2.25}, + + {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, + {"label":"A", "x":1.75, "y":3.25}, + {"label":"S", "x":2.75, "y":3.25}, + {"label":"D", "x":3.75, "y":3.25}, + {"label":"F", "x":4.75, "y":3.25}, + {"label":"G", "x":5.75, "y":3.25}, + {"label":"H", "x":6.75, "y":3.25}, + {"label":"J", "x":7.75, "y":3.25}, + {"label":"K", "x":8.75, "y":3.25}, + {"label":"L", "x":9.75, "y":3.25}, + {"label":":", "x":10.75, "y":3.25}, + {"label":"\"", "x":11.75, "y":3.25}, + {"label":"Enter", "x":12.75, "y":3.25, "w":2.25}, + + {"label":"Shift", "x":0, "y":4.25, "w":2.25}, + {"label":"Z", "x":2.25, "y":4.25}, + {"label":"X", "x":3.25, "y":4.25}, + {"label":"C", "x":4.25, "y":4.25}, + {"label":"V", "x":5.25, "y":4.25}, + {"label":"B", "x":6.25, "y":4.25}, + {"label":"N", "x":7.25, "y":4.25}, + {"label":"M", "x":8.25, "y":4.25}, + {"label":"<", "x":9.25, "y":4.25}, + {"label":">", "x":10.25, "y":4.25}, + {"label":"?", "x":11.25, "y":4.25}, + {"label":"Shift", "x":12.25, "y":4.25, "w":2.75}, + {"label":"\u2191", "x":16.25, "y":4.25}, + + {"label":"Ctrl", "x":0, "y":5.25, "w":1.25}, + {"label":"Win", "x":1.25, "y":5.25, "w":1.25}, + {"label":"Alt", "x":2.5, "y":5.25, "w":1.25}, + {"x":3.75, "y":5.25, "w":6.25}, + {"label":"Alt", "x":10, "y":5.25, "w":1.25}, + {"label":"Win", "x":11.25, "y":5.25, "w":1.25}, + {"label":"Menu", "x":12.5, "y":5.25, "w":1.25}, + {"label":"Ctrl", "x":13.75, "y":5.25, "w":1.25}, + {"label":"\u2190", "x":15.25, "y":5.25}, + {"label":"\u2193", "x":16.25, "y":5.25}, + {"label":"\u2192", "x":17.25, "y":5.25} + ] + }, + "LAYOUT_tkl_iso": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":2, "y":0}, + {"label":"F2", "x":3, "y":0}, + {"label":"F3", "x":4, "y":0}, + {"label":"F4", "x":5, "y":0}, + {"label":"F5", "x":6.5, "y":0}, + {"label":"F6", "x":7.5, "y":0}, + {"label":"F7", "x":8.5, "y":0}, + {"label":"F8", "x":9.5, "y":0}, + {"label":"F9", "x":11, "y":0}, + {"label":"F10", "x":12, "y":0}, + {"label":"F11", "x":13, "y":0}, + {"label":"F12", "x":14, "y":0}, + {"label":"PrtSc", "x":15.25, "y":0}, + {"label":"Scroll Lock", "x":16.25, "y":0}, + {"label":"Pause", "x":17.25, "y":0}, + + {"label":"~", "x":0, "y":1.25}, + {"label":"!", "x":1, "y":1.25}, + {"label":"@", "x":2, "y":1.25}, + {"label":"#", "x":3, "y":1.25}, + {"label":"$", "x":4, "y":1.25}, + {"label":"%", "x":5, "y":1.25}, + {"label":"^", "x":6, "y":1.25}, + {"label":"&", "x":7, "y":1.25}, + {"label":"*", "x":8, "y":1.25}, + {"label":"(", "x":9, "y":1.25}, + {"label":")", "x":10, "y":1.25}, + {"label":"_", "x":11, "y":1.25}, + {"label":"+", "x":12, "y":1.25}, + {"label":"Backspace", "x":13, "y":1.25, "w":2}, + {"label":"Insert", "x":15.25, "y":1.25}, + {"label":"Home", "x":16.25, "y":1.25}, + {"label":"PgUp", "x":17.25, "y":1.25}, + + {"label":"Tab", "x":0, "y":2.25, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.25}, + {"label":"W", "x":2.5, "y":2.25}, + {"label":"E", "x":3.5, "y":2.25}, + {"label":"R", "x":4.5, "y":2.25}, + {"label":"T", "x":5.5, "y":2.25}, + {"label":"Y", "x":6.5, "y":2.25}, + {"label":"U", "x":7.5, "y":2.25}, + {"label":"I", "x":8.5, "y":2.25}, + {"label":"O", "x":9.5, "y":2.25}, + {"label":"P", "x":10.5, "y":2.25}, + {"label":"{", "x":11.5, "y":2.25}, + {"label":"}", "x":12.5, "y":2.25}, + {"label":"Delete", "x":15.25, "y":2.25}, + {"label":"End", "x":16.25, "y":2.25}, + {"label":"PgDn", "x":17.25, "y":2.25}, + + {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, + {"label":"A", "x":1.75, "y":3.25}, + {"label":"S", "x":2.75, "y":3.25}, + {"label":"D", "x":3.75, "y":3.25}, + {"label":"F", "x":4.75, "y":3.25}, + {"label":"G", "x":5.75, "y":3.25}, + {"label":"H", "x":6.75, "y":3.25}, + {"label":"J", "x":7.75, "y":3.25}, + {"label":"K", "x":8.75, "y":3.25}, + {"label":"L", "x":9.75, "y":3.25}, + {"label":":", "x":10.75, "y":3.25}, + {"label":"\"", "x":11.75, "y":3.25}, + {"label":"~", "x":12.75, "y":3.25}, + {"label":"Enter", "x":13.75, "y":2.25, "w":1.25, "h":2}, + + {"label":"Shift", "x":0, "y":4.25, "w":1.25}, + {"label":"|", "x":1.25, "y":4.25}, + {"label":"Z", "x":2.25, "y":4.25}, + {"label":"X", "x":3.25, "y":4.25}, + {"label":"C", "x":4.25, "y":4.25}, + {"label":"V", "x":5.25, "y":4.25}, + {"label":"B", "x":6.25, "y":4.25}, + {"label":"N", "x":7.25, "y":4.25}, + {"label":"M", "x":8.25, "y":4.25}, + {"label":"<", "x":9.25, "y":4.25}, + {"label":">", "x":10.25, "y":4.25}, + {"label":"?", "x":11.25, "y":4.25}, + {"label":"Shift", "x":12.25, "y":4.25, "w":2.75}, + {"label":"\u2191", "x":16.25, "y":4.25}, + + {"label":"Ctrl", "x":0, "y":5.25, "w":1.25}, + {"label":"Win", "x":1.25, "y":5.25, "w":1.25}, + {"label":"Alt", "x":2.5, "y":5.25, "w":1.25}, + {"x":3.75, "y":5.25, "w":6.25}, + {"label":"Alt", "x":10, "y":5.25, "w":1.25}, + {"label":"Win", "x":11.25, "y":5.25, "w":1.25}, + {"label":"Menu", "x":12.5, "y":5.25, "w":1.25}, + {"label":"Ctrl", "x":13.75, "y":5.25, "w":1.25}, + {"label":"\u2190", "x":15.25, "y":5.25}, + {"label":"\u2193", "x":16.25, "y":5.25}, + {"label":"\u2192", "x":17.25, "y":5.25} + ] + }, + "LAYOUT_tkl_iso_f13": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":1.25, "y":0}, + {"label":"F2", "x":2.25, "y":0}, + {"label":"F3", "x":3.25, "y":0}, + {"label":"F4", "x":4.25, "y":0}, + {"label":"F5", "x":5.5, "y":0}, + {"label":"F6", "x":6.5, "y":0}, + {"label":"F7", "x":7.5, "y":0}, + {"label":"F8", "x":8.5, "y":0}, + {"label":"F9", "x":9.75, "y":0}, + {"label":"F10", "x":10.75, "y":0}, + {"label":"F11", "x":11.75, "y":0}, + {"label":"F12", "x":12.75, "y":0}, + {"label":"F13", "x":14, "y":0}, + {"label":"PrtSc", "x":15.25, "y":0}, + {"label":"Scroll Lock", "x":16.25, "y":0}, + {"label":"Pause", "x":17.25, "y":0}, + + {"label":"~", "x":0, "y":1.25}, + {"label":"!", "x":1, "y":1.25}, + {"label":"@", "x":2, "y":1.25}, + {"label":"#", "x":3, "y":1.25}, + {"label":"$", "x":4, "y":1.25}, + {"label":"%", "x":5, "y":1.25}, + {"label":"^", "x":6, "y":1.25}, + {"label":"&", "x":7, "y":1.25}, + {"label":"*", "x":8, "y":1.25}, + {"label":"(", "x":9, "y":1.25}, + {"label":")", "x":10, "y":1.25}, + {"label":"_", "x":11, "y":1.25}, + {"label":"+", "x":12, "y":1.25}, + {"label":"Backspace", "x":13, "y":1.25, "w":2}, + {"label":"Insert", "x":15.25, "y":1.25}, + {"label":"Home", "x":16.25, "y":1.25}, + {"label":"PgUp", "x":17.25, "y":1.25}, + + {"label":"Tab", "x":0, "y":2.25, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.25}, + {"label":"W", "x":2.5, "y":2.25}, + {"label":"E", "x":3.5, "y":2.25}, + {"label":"R", "x":4.5, "y":2.25}, + {"label":"T", "x":5.5, "y":2.25}, + {"label":"Y", "x":6.5, "y":2.25}, + {"label":"U", "x":7.5, "y":2.25}, + {"label":"I", "x":8.5, "y":2.25}, + {"label":"O", "x":9.5, "y":2.25}, + {"label":"P", "x":10.5, "y":2.25}, + {"label":"{", "x":11.5, "y":2.25}, + {"label":"}", "x":12.5, "y":2.25}, + {"label":"Delete", "x":15.25, "y":2.25}, + {"label":"End", "x":16.25, "y":2.25}, + {"label":"PgDn", "x":17.25, "y":2.25}, + + {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, + {"label":"A", "x":1.75, "y":3.25}, + {"label":"S", "x":2.75, "y":3.25}, + {"label":"D", "x":3.75, "y":3.25}, + {"label":"F", "x":4.75, "y":3.25}, + {"label":"G", "x":5.75, "y":3.25}, + {"label":"H", "x":6.75, "y":3.25}, + {"label":"J", "x":7.75, "y":3.25}, + {"label":"K", "x":8.75, "y":3.25}, + {"label":"L", "x":9.75, "y":3.25}, + {"label":":", "x":10.75, "y":3.25}, + {"label":"\"", "x":11.75, "y":3.25}, + {"label":"~", "x":12.75, "y":3.25}, + {"label":"Enter", "x":13.75, "y":2.25, "w":1.25, "h":2}, + + {"label":"Shift", "x":0, "y":4.25, "w":1.25}, + {"label":"|", "x":1.25, "y":4.25}, + {"label":"Z", "x":2.25, "y":4.25}, + {"label":"X", "x":3.25, "y":4.25}, + {"label":"C", "x":4.25, "y":4.25}, + {"label":"V", "x":5.25, "y":4.25}, + {"label":"B", "x":6.25, "y":4.25}, + {"label":"N", "x":7.25, "y":4.25}, + {"label":"M", "x":8.25, "y":4.25}, + {"label":"<", "x":9.25, "y":4.25}, + {"label":">", "x":10.25, "y":4.25}, + {"label":"?", "x":11.25, "y":4.25}, + {"label":"Shift", "x":12.25, "y":4.25, "w":2.75}, + {"label":"\u2191", "x":16.25, "y":4.25}, + + {"label":"Ctrl", "x":0, "y":5.25, "w":1.25}, + {"label":"Win", "x":1.25, "y":5.25, "w":1.25}, + {"label":"Alt", "x":2.5, "y":5.25, "w":1.25}, + {"x":3.75, "y":5.25, "w":6.25}, + {"label":"Alt", "x":10, "y":5.25, "w":1.25}, + {"label":"Win", "x":11.25, "y":5.25, "w":1.25}, + {"label":"Menu", "x":12.5, "y":5.25, "w":1.25}, + {"label":"Ctrl", "x":13.75, "y":5.25, "w":1.25}, + {"label":"\u2190", "x":15.25, "y":5.25}, + {"label":"\u2193", "x":16.25, "y":5.25}, + {"label":"\u2192", "x":17.25, "y":5.25} + ] } } } diff --git a/keyboards/dyz/dyz_tkl/rules.mk b/keyboards/dyz/dyz_tkl/rules.mk index b1a2bc4551..a488e3dc0b 100644 --- a/keyboards/dyz/dyz_tkl/rules.mk +++ b/keyboards/dyz/dyz_tkl/rules.mk @@ -19,4 +19,3 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -ENCODER_ENABLE = no From d35a98ca2482745b0f4b45f4dd3a80552e46289e Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Fri, 8 Oct 2021 04:12:46 +0000 Subject: [PATCH 217/595] dyz selka40 touch-up (#14748) * friendly-format info.json * remove info.json rounding errors * fix info.json layout macro reference JSON data referenced `LAYOUT` instead of `LAYOUT_all`. * correct info.json key sequence * remove dead space from info.json layout data * remove vertical offsets from info.json layout data * horizontally align info.json layout data * add matrix diagram to selka40.h * add LAYOUT_2u_bs * remove duplicated settings --- keyboards/dyz/selka40/config.h | 15 ----- keyboards/dyz/selka40/info.json | 106 +++++++++++++++++++++++++++++++- keyboards/dyz/selka40/selka40.h | 37 +++++++++-- 3 files changed, 136 insertions(+), 22 deletions(-) diff --git a/keyboards/dyz/selka40/config.h b/keyboards/dyz/selka40/config.h index 6f79036296..1871fd2cb6 100644 --- a/keyboards/dyz/selka40/config.h +++ b/keyboards/dyz/selka40/config.h @@ -23,21 +23,6 @@ along with this program. If not, see . #define MANUFACTURER dyz #define PRODUCT selka40 -/* key matrix size */ -#define MATRIX_ROWS 4 -#define MATRIX_COLS 13 - -/* - * Keyboard Matrix Assignments - * - * Change this to how you wired your keyboard - * COLS: AVR pins used for columns, left to right - * ROWS: AVR pins used for rows, top to bottom - * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) - * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) - * -*/ - /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 diff --git a/keyboards/dyz/selka40/info.json b/keyboards/dyz/selka40/info.json index 048dbf45f3..b947bbb59a 100644 --- a/keyboards/dyz/selka40/info.json +++ b/keyboards/dyz/selka40/info.json @@ -23,8 +23,110 @@ "device_ver": "0x0001" }, "layouts": { - "LAYOUT": { - "layout": [{"label":"Esc", "x":1.03, "y":2.45}, {"label":"Q", "x":2.03, "y":2.45}, {"label":"P", "x":11.969999999999999, "y":2.45}, {"label":"{", "x":12.969999999999999, "y":2.45}, {"label":"}", "x":13.969999999999999, "y":2.45}, {"label":"Tab", "x":0.9, "y":3.45, "w":1.25}, {"label":"A", "x":2.15, "y":3.45}, {"label":"\"", "x":12.34, "y":3.45}, {"label":"Enter", "x":13.34, "y":3.45, "w":1.75}, {"label":"Shift", "x":0.75, "y":4.45, "w":1.75}, {"label":"Z", "x":2.5, "y":4.45}, {"label":">", "x":11.97, "y":4.45}, {"label":"?", "x":12.97, "y":4.45}, {"label":"Shift", "x":13.97, "y":4.45, "w":1.25}, {"label":"Ctrl", "x":1, "y":5.45, "w":1.25}, {"label":"Win", "x":2.25, "y":5.45}, {"label":"Fn2", "x":12.72, "y":5.45}, {"label":"Ctrl", "x":13.72, "y":5.45, "w":1.25}, {"label":"W", "x":3.47, "y":1.9300000000000006}, {"label":"E", "x":4.47, "y":1.9300000000000006}, {"label":"R", "x":5.47, "y":1.9300000000000006}, {"label":"T", "x":6.47, "y":1.9300000000000006}, {"label":"S", "x":3.72, "y":2.9300000000000006}, {"label":"D", "x":4.72, "y":2.9300000000000006}, {"label":"F", "x":5.72, "y":2.9300000000000006}, {"label":"G", "x":6.72, "y":2.9300000000000006}, {"label":"X", "x":4.22, "y":3.9300000000000006}, {"label":"C", "x":5.22, "y":3.9300000000000006}, {"label":"V", "x":6.22, "y":3.9300000000000006}, {"label":"B", "x":7.22, "y":3.9300000000000006}, {"label":"Alt", "x":5.22, "y":4.930000000000001}, {"label":"Space", "x":6.22, "y":4.930000000000001, "w":2}, {"label":"Y", "x":7.37, "y":4.1000000000000005}, {"label":"U", "x":8.37, "y":4.1000000000000005}, {"label":"I", "x":9.37, "y":4.1000000000000005}, {"label":"O", "x":10.37, "y":4.1000000000000005}, {"label":"H", "x":7.62, "y":5.1000000000000005}, {"label":"J", "x":8.62, "y":5.1000000000000005}, {"label":"K", "x":9.62, "y":5.1000000000000005}, {"label":"L", "x":10.62, "y":5.1000000000000005}, {"label":"B", "x":7.12, "y":6.1000000000000005}, {"label":"N", "x":8.12, "y":6.1000000000000005}, {"label":"M", "x":9.12, "y":6.1000000000000005}, {"label":"<", "x":10.12, "y":6.1000000000000005}, {"label":"Space", "x":7.12, "y":7.1000000000000005, "w":2.25}, {"label":"Fn", "x":9.37, "y":7.1000000000000005}] + "LAYOUT_all": { + "layout": [ + {"label":"Esc", "x":0.5, "y":0}, + {"label":"Q", "x":1.5, "y":0}, + {"label":"W", "x":2.5, "y":0}, + {"label":"E", "x":3.5, "y":0}, + {"label":"R", "x":4.5, "y":0}, + {"label":"T", "x":5.5, "y":0}, + {"label":"Y", "x":7.5, "y":0}, + {"label":"U", "x":8.5, "y":0}, + {"label":"I", "x":9.5, "y":0}, + {"label":"O", "x":10.5, "y":0}, + {"label":"P", "x":11.5, "y":0}, + {"label":"{", "x":12.5, "y":0}, + {"label":"}", "x":13.5, "y":0}, + + {"label":"Tab", "x":0.25, "y":1, "w":1.25}, + {"label":"A", "x":1.5, "y":1}, + {"label":"S", "x":2.5, "y":1}, + {"label":"D", "x":3.5, "y":1}, + {"label":"F", "x":4.5, "y":1}, + {"label":"G", "x":5.5, "y":1}, + {"label":"H", "x":8, "y":1}, + {"label":"J", "x":9, "y":1}, + {"label":"K", "x":10, "y":1}, + {"label":"L", "x":11, "y":1}, + {"label":"\"", "x":12, "y":1}, + {"label":"Enter", "x":13, "y":1, "w":1.75}, + + {"label":"Shift", "x":0, "y":2, "w":1.75}, + {"label":"Z", "x":1.75, "y":2}, + {"label":"X", "x":2.75, "y":2}, + {"label":"C", "x":3.75, "y":2}, + {"label":"V", "x":4.75, "y":2}, + {"label":"B", "x":5.75, "y":2}, + {"label":"B", "x":7.75, "y":2}, + {"label":"N", "x":8.75, "y":2}, + {"label":"M", "x":9.75, "y":2}, + {"label":"<", "x":10.75, "y":2}, + {"label":">", "x":11.75, "y":2}, + {"label":"?", "x":12.75, "y":2}, + {"label":"Shift", "x":13.75, "y":2, "w":1.25}, + + {"label":"Ctrl", "x":0.25, "y":3, "w":1.25}, + {"label":"Win", "x":1.5, "y":3}, + {"label":"Alt", "x":3.75, "y":3}, + {"label":"Space", "x":4.75, "y":3, "w":2}, + {"label":"Space", "x":7.75, "y":3, "w":2.25}, + {"label":"Fn", "x":10, "y":3}, + {"label":"Fn2", "x":12.5, "y":3}, + {"label":"Ctrl", "x":13.5, "y":3, "w":1.25} + ] + }, + "LAYOUT_2u_bs": { + "layout": [ + {"label":"Esc", "x":0.5, "y":0}, + {"label":"Q", "x":1.5, "y":0}, + {"label":"W", "x":2.5, "y":0}, + {"label":"E", "x":3.5, "y":0}, + {"label":"R", "x":4.5, "y":0}, + {"label":"T", "x":5.5, "y":0}, + {"label":"Y", "x":7.5, "y":0}, + {"label":"U", "x":8.5, "y":0}, + {"label":"I", "x":9.5, "y":0}, + {"label":"O", "x":10.5, "y":0}, + {"label":"P", "x":11.5, "y":0}, + {"label":"Backspace", "x":12.5, "y":0, "w":2}, + + {"label":"Tab", "x":0.25, "y":1, "w":1.25}, + {"label":"A", "x":1.5, "y":1}, + {"label":"S", "x":2.5, "y":1}, + {"label":"D", "x":3.5, "y":1}, + {"label":"F", "x":4.5, "y":1}, + {"label":"G", "x":5.5, "y":1}, + {"label":"H", "x":8, "y":1}, + {"label":"J", "x":9, "y":1}, + {"label":"K", "x":10, "y":1}, + {"label":"L", "x":11, "y":1}, + {"label":"\"", "x":12, "y":1}, + {"label":"Enter", "x":13, "y":1, "w":1.75}, + + {"label":"Shift", "x":0, "y":2, "w":1.75}, + {"label":"Z", "x":1.75, "y":2}, + {"label":"X", "x":2.75, "y":2}, + {"label":"C", "x":3.75, "y":2}, + {"label":"V", "x":4.75, "y":2}, + {"label":"B", "x":5.75, "y":2}, + {"label":"B", "x":7.75, "y":2}, + {"label":"N", "x":8.75, "y":2}, + {"label":"M", "x":9.75, "y":2}, + {"label":"<", "x":10.75, "y":2}, + {"label":">", "x":11.75, "y":2}, + {"label":"?", "x":12.75, "y":2}, + {"label":"Shift", "x":13.75, "y":2, "w":1.25}, + + {"label":"Ctrl", "x":0.25, "y":3, "w":1.25}, + {"label":"Win", "x":1.5, "y":3}, + {"label":"Alt", "x":3.75, "y":3}, + {"label":"Space", "x":4.75, "y":3, "w":2}, + {"label":"Space", "x":7.75, "y":3, "w":2.25}, + {"label":"Fn", "x":10, "y":3}, + {"label":"Fn2", "x":12.5, "y":3}, + {"label":"Ctrl", "x":13.5, "y":3, "w":1.25} + ] } } } diff --git a/keyboards/dyz/selka40/selka40.h b/keyboards/dyz/selka40/selka40.h index c241bd44f7..ddff79f9f9 100644 --- a/keyboards/dyz/selka40/selka40.h +++ b/keyboards/dyz/selka40/selka40.h @@ -18,14 +18,41 @@ #include "quantum.h" #define _X_ KC_NO +/* + * ┌───────┐ + * │0B │ 2u Backspace + * └───────┘ + * ┌───┬───┬───┬───┬───┬───┐ ┌───┬───┬───┬───┬───┬───┬───┐ + * │00 │01 │02 │03 │04 │05 │ │06 │07 │08 │09 │0A │0B │0C │ + * ┌┴───┼───┼───┼───┼───┼───┤ └─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┐ + * │10 │11 │12 │13 │14 │15 │ │16 │17 │18 │19 │1A │1B │ + * ┌┴────┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ ┌┴──┬┴──┬┴──┬┴──┬┴──┬┴──┬───┴┐ + * │20 │21 │22 │23 │24 │25 │ │26 │27 │28 │29 │2A │2B │2C │ + * └┬────┬┴──┬┴───┼───┼───┴───┤ ├───┴───┴┬──┴┬──┴──┬┴──┬┴───┬┘ + * │30 │31 │ │34 │35 │ │36 │37 │ │3B │3C │ + * └────┴───┘ └───┴───────┘ └────────┴───┘ └───┴────┘ + */ + #define LAYOUT_all( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ + K30, K31, K34, K35, K36, K37, K3B, K3C \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, _X_ }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C }, \ + { K30, K31, _X_, _X_, K34, K35, K36, K37, _X_, _X_, _X_, K3B, K3C } \ +} + +#define LAYOUT_2u_bs( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ K30, K31, K34, K35, K36, K37, K3B, K3C \ ) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, _X_ }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C }, \ - { K30, K31, _X_, _X_, K34, K35, K36, K37, _X_, _X_, _X_, K3B, K3C } \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, _X_ }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, _X_ }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C }, \ + { K30, K31, _X_, _X_, K34, K35, K36, K37, _X_, _X_, _X_, K3B, K3C } \ } From 7205b70e84dae72d03fcc2e127a9e1f2bc0acf09 Mon Sep 17 00:00:00 2001 From: s-show Date: Fri, 8 Oct 2021 19:28:00 +0900 Subject: [PATCH 218/595] Translate keycodes us ansi shifted (#13820) * copy "keycodes_us_ansi_shifted.md" to docs/ja. * Add japanese translation "docs/keycodes_us_ansi_shifted.md". * Apply suggestions from code review Co-authored-by: shela * Update docs/ja/keycodes_us_ansi_shifted.md Co-authored-by: Takeshi ISHII <2170248+mtei@users.noreply.github.com> Co-authored-by: shela Co-authored-by: Takeshi ISHII <2170248+mtei@users.noreply.github.com> --- docs/ja/keycodes_us_ansi_shifted.md | 41 +++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 docs/ja/keycodes_us_ansi_shifted.md diff --git a/docs/ja/keycodes_us_ansi_shifted.md b/docs/ja/keycodes_us_ansi_shifted.md new file mode 100644 index 0000000000..3a574d0bed --- /dev/null +++ b/docs/ja/keycodes_us_ansi_shifted.md @@ -0,0 +1,41 @@ +# US ANSI シフト記号 + + +これらのキーコードは、標準の US ANSI 配列のキーボードで「シフトされる」文字に対応します。これらのキーコードは自身のキーコードを持たず、`LSFT(kc)` の単なるショートカットであり、記号自体ではなく Shift キー抜きのキーコードと左 Shift キーを送信します。 + +## 注意書き + +残念ながら、これらのキーコードは、モッドタップやレイヤータップの中で使えません。キーコードで指定されたモディファイアは無視されるからです。 + +さらに、Windows でリモートデスクトップ接続を使う場合に、問題が発生する場合があります。なぜならば、これらのコードは Shift キーを非常に速く送信するため、リモートデスクトップがコードを見落とすかもしれないからです。 + +この問題を解決するには、リモートデスクトップ接続を開いて「オプションの表示」をクリックし、「ローカル リソース」タブを開きます。キーボードセクションでドロップダウンを「このコンピュータ」に変更します。これで問題が解決され、文字が正しく機能するようになります。 + +## キーコード + +|キー |エイリアス |説明 | +|------------------------|-------------------|-----------| +|`KC_TILDE` |`KC_TILD` |`~` | +|`KC_EXCLAIM` |`KC_EXLM` |`!` | +|`KC_AT` | |`@` | +|`KC_HASH` | |`#` | +|`KC_DOLLAR` |`KC_DLR` |`$` | +|`KC_PERCENT` |`KC_PERC` |`%` | +|`KC_CIRCUMFLEX` |`KC_CIRC` |`^` | +|`KC_AMPERSAND` |`KC_AMPR` |`&` | +|`KC_ASTERISK` |`KC_ASTR` |`*` | +|`KC_LEFT_PAREN` |`KC_LPRN` |`(` | +|`KC_RIGHT_PAREN` |`KC_RPRN` |`)` | +|`KC_UNDERSCORE` |`KC_UNDS` |`_` | +|`KC_PLUS` | |`+` | +|`KC_LEFT_CURLY_BRACE` |`KC_LCBR` |`{` | +|`KC_RIGHT_CURLY_BRACE` |`KC_RCBR` |`}` | +|`KC_PIPE` | |`\|` | +|`KC_COLON` |`KC_COLN` |`:` | +|`KC_DOUBLE_QUOTE` |`KC_DQUO`, `KC_DQT`|`"` | +|`KC_LEFT_ANGLE_BRACKET` |`KC_LABK`, `KC_LT` |`<` | +|`KC_RIGHT_ANGLE_BRACKET`|`KC_RABK`, `KC_GT` |`>` | +|`KC_QUESTION` |`KC_QUES` |`?` | From 00fd4044334022b5bbace987f8ab94b72e9f49bc Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Fri, 8 Oct 2021 13:44:07 +0100 Subject: [PATCH 219/595] Put back eeconfig_update_ functions (#14751) --- quantum/led_matrix/led_matrix.c | 2 ++ quantum/rgb_matrix/rgb_matrix.c | 2 ++ 2 files changed, 4 insertions(+) diff --git a/quantum/led_matrix/led_matrix.c b/quantum/led_matrix/led_matrix.c index 2f0086d368..85556d1573 100644 --- a/quantum/led_matrix/led_matrix.c +++ b/quantum/led_matrix/led_matrix.c @@ -120,6 +120,8 @@ const uint8_t k_led_matrix_split[2] = LED_MATRIX_SPLIT; EECONFIG_DEBOUNCE_HELPER(led_matrix, EECONFIG_LED_MATRIX, led_matrix_eeconfig); +void eeconfig_update_led_matrix(void) { eeconfig_flush_led_matrix(true); } + void eeconfig_update_led_matrix_default(void) { dprintf("eeconfig_update_led_matrix_default\n"); led_matrix_eeconfig.enable = 1; diff --git a/quantum/rgb_matrix/rgb_matrix.c b/quantum/rgb_matrix/rgb_matrix.c index 0c9ef8f7a7..c260b6e1e8 100644 --- a/quantum/rgb_matrix/rgb_matrix.c +++ b/quantum/rgb_matrix/rgb_matrix.c @@ -141,6 +141,8 @@ const uint8_t k_rgb_matrix_split[2] = RGB_MATRIX_SPLIT; EECONFIG_DEBOUNCE_HELPER(rgb_matrix, EECONFIG_RGB_MATRIX, rgb_matrix_config); +void eeconfig_update_rgb_matrix(void) { eeconfig_flush_rgb_matrix(true); } + void eeconfig_update_rgb_matrix_default(void) { dprintf("eeconfig_update_rgb_matrix_default\n"); rgb_matrix_config.enable = 1; From db41a3426c594fccac149b99b810e207cd069d65 Mon Sep 17 00:00:00 2001 From: Ryan Date: Sat, 9 Oct 2021 02:15:20 +1100 Subject: [PATCH 220/595] Improve Adafruit BLE configuration defines (#14749) * Improve Adafruit BLE configuration defines * Formatting --- docs/feature_bluetooth.md | 6 +-- drivers/bluetooth/adafruit_ble.cpp | 44 +++++++++---------- keyboards/dtisaac/dosa40rgb/config.h | 5 --- .../dosa40rgb/keymaps/default/keymap.c | 4 +- .../dactyl_manuform/5x6_2_5/config.h | 3 -- keyboards/handwired/prkl30/feather/config.h | 3 -- keyboards/handwired/pterodactyl/config.h | 4 -- .../spaceman/pancake/rev1/feather/config.h | 4 -- keyboards/tokyokeyboard/alix40/config.h | 3 -- 9 files changed, 26 insertions(+), 50 deletions(-) diff --git a/docs/feature_bluetooth.md b/docs/feature_bluetooth.md index 1b6a825e7a..fdf19c1077 100644 --- a/docs/feature_bluetooth.md +++ b/docs/feature_bluetooth.md @@ -17,9 +17,9 @@ Not Supported Yet but possible: ### Adafruit BLE SPI Friend Currently The only bluetooth chipset supported by QMK is the Adafruit Bluefruit SPI Friend. It's a Nordic nRF5182 based chip running Adafruit's custom firmware. Data is transmitted via Adafruit's SDEP over Hardware SPI. The [Feather 32u4 Bluefruit LE](https://www.adafruit.com/product/2829) is supported as it's an AVR mcu connected via SPI to the Nordic BLE chip with Adafruit firmware. If Building a custom board with the SPI friend it would be easiest to just use the pin selection that the 32u4 feather uses but you can change the pins in the config.h options with the following defines: -* #define AdafruitBleResetPin D4 -* #define AdafruitBleCSPin B4 -* #define AdafruitBleIRQPin E6 +* `#define ADAFRUIT_BLE_RST_PIN D4` +* `#define ADAFRUIT_BLE_CS_PIN B4` +* `#define ADAFRUIT_BLE_IRQ_PIN E6` A Bluefruit UART friend can be converted to an SPI friend, however this [requires](https://github.com/qmk/qmk_firmware/issues/2274) some reflashing and soldering directly to the MDBT40 chip. diff --git a/drivers/bluetooth/adafruit_ble.cpp b/drivers/bluetooth/adafruit_ble.cpp index 3f2cc35734..34a780e9a5 100644 --- a/drivers/bluetooth/adafruit_ble.cpp +++ b/drivers/bluetooth/adafruit_ble.cpp @@ -16,24 +16,22 @@ // These are the pin assignments for the 32u4 boards. // You may define them to something else in your config.h // if yours is wired up differently. -#ifndef AdafruitBleResetPin -# define AdafruitBleResetPin D4 +#ifndef ADAFRUIT_BLE_RST_PIN +# define ADAFRUIT_BLE_RST_PIN D4 #endif -#ifndef AdafruitBleCSPin -# define AdafruitBleCSPin B4 +#ifndef ADAFRUIT_BLE_CS_PIN +# define ADAFRUIT_BLE_CS_PIN B4 #endif -#ifndef AdafruitBleIRQPin -# define AdafruitBleIRQPin E6 +#ifndef ADAFRUIT_BLE_IRQ_PIN +# define ADAFRUIT_BLE_IRQ_PIN E6 #endif -#ifndef AdafruitBleSpiClockSpeed -# define AdafruitBleSpiClockSpeed 4000000UL // SCK frequency +#ifndef ADAFRUIT_BLE_SCK_DIVISOR +# define ADAFRUIT_BLE_SCK_DIVISOR 2 // 4MHz SCK/8MHz CPU, calculated for Feather 32U4 BLE #endif -#define SCK_DIVISOR (F_CPU / AdafruitBleSpiClockSpeed) - #define SAMPLE_BATTERY #define ConnectionUpdateInterval 1000 /* milliseconds */ @@ -145,7 +143,7 @@ static bool at_command_P(const char *cmd, char *resp, uint16_t resplen, bool ver // Send a single SDEP packet static bool sdep_send_pkt(const struct sdep_msg *msg, uint16_t timeout) { - spi_start(AdafruitBleCSPin, false, 0, SCK_DIVISOR); + spi_start(ADAFRUIT_BLE_CS_PIN, false, 0, ADAFRUIT_BLE_SCK_DIVISOR); uint16_t timerStart = timer_read(); bool success = false; bool ready = false; @@ -159,7 +157,7 @@ static bool sdep_send_pkt(const struct sdep_msg *msg, uint16_t timeout) { // Release it and let it initialize spi_stop(); wait_us(SdepBackOff); - spi_start(AdafruitBleCSPin, false, 0, SCK_DIVISOR); + spi_start(ADAFRUIT_BLE_CS_PIN, false, 0, ADAFRUIT_BLE_SCK_DIVISOR); } while (timer_elapsed(timerStart) < timeout); if (ready) { @@ -192,7 +190,7 @@ static bool sdep_recv_pkt(struct sdep_msg *msg, uint16_t timeout) { bool ready = false; do { - ready = readPin(AdafruitBleIRQPin); + ready = readPin(ADAFRUIT_BLE_IRQ_PIN); if (ready) { break; } @@ -200,7 +198,7 @@ static bool sdep_recv_pkt(struct sdep_msg *msg, uint16_t timeout) { } while (timer_elapsed(timerStart) < timeout); if (ready) { - spi_start(AdafruitBleCSPin, false, 0, SCK_DIVISOR); + spi_start(ADAFRUIT_BLE_CS_PIN, false, 0, ADAFRUIT_BLE_SCK_DIVISOR); do { // Read the command type, waiting for the data to be ready @@ -209,7 +207,7 @@ static bool sdep_recv_pkt(struct sdep_msg *msg, uint16_t timeout) { // Release it and let it initialize spi_stop(); wait_us(SdepBackOff); - spi_start(AdafruitBleCSPin, false, 0, SCK_DIVISOR); + spi_start(ADAFRUIT_BLE_CS_PIN, false, 0, ADAFRUIT_BLE_SCK_DIVISOR); continue; } @@ -235,7 +233,7 @@ static void resp_buf_read_one(bool greedy) { return; } - if (readPin(AdafruitBleIRQPin)) { + if (readPin(ADAFRUIT_BLE_IRQ_PIN)) { struct sdep_msg msg; again: @@ -246,7 +244,7 @@ static void resp_buf_read_one(bool greedy) { dprintf("recv latency %dms\n", TIMER_DIFF_16(timer_read(), last_send)); } - if (greedy && resp_buf.peek(last_send) && readPin(AdafruitBleIRQPin)) { + if (greedy && resp_buf.peek(last_send) && readPin(ADAFRUIT_BLE_IRQ_PIN)) { goto again; } } @@ -297,16 +295,16 @@ static bool ble_init(void) { state.configured = false; state.is_connected = false; - setPinInput(AdafruitBleIRQPin); + setPinInput(ADAFRUIT_BLE_IRQ_PIN); spi_init(); // Perform a hardware reset - setPinOutput(AdafruitBleResetPin); - writePinHigh(AdafruitBleResetPin); - writePinLow(AdafruitBleResetPin); + setPinOutput(ADAFRUIT_BLE_RST_PIN); + writePinHigh(ADAFRUIT_BLE_RST_PIN); + writePinLow(ADAFRUIT_BLE_RST_PIN); wait_ms(10); - writePinHigh(AdafruitBleResetPin); + writePinHigh(ADAFRUIT_BLE_RST_PIN); wait_ms(1000); // Give it a second to initialize @@ -509,7 +507,7 @@ void adafruit_ble_task(void) { resp_buf_read_one(true); send_buf_send_one(SdepShortTimeout); - if (resp_buf.empty() && (state.event_flags & UsingEvents) && readPin(AdafruitBleIRQPin)) { + if (resp_buf.empty() && (state.event_flags & UsingEvents) && readPin(ADAFRUIT_BLE_IRQ_PIN)) { // Must be an event update if (at_command_P(PSTR("AT+EVENTSTATUS"), resbuf, sizeof(resbuf))) { uint32_t mask = strtoul(resbuf, NULL, 16); diff --git a/keyboards/dtisaac/dosa40rgb/config.h b/keyboards/dtisaac/dosa40rgb/config.h index 52891c4aa5..0ed29bf941 100644 --- a/keyboards/dtisaac/dosa40rgb/config.h +++ b/keyboards/dtisaac/dosa40rgb/config.h @@ -30,11 +30,6 @@ along with this program. If not, see . #define MATRIX_ROWS 4 #define MATRIX_COLS 11 -/* AdafruitBle Pin */ -#define AdafruitBleResetPin D4 -#define AdafruitBleCSPin B4 -#define AdafruitBleIRQPin E6 - /* * Keyboard Matrix Assignments * diff --git a/keyboards/dtisaac/dosa40rgb/keymaps/default/keymap.c b/keyboards/dtisaac/dosa40rgb/keymaps/default/keymap.c index c9bde4bb8d..e25bd59708 100644 --- a/keyboards/dtisaac/dosa40rgb/keymaps/default/keymap.c +++ b/keyboards/dtisaac/dosa40rgb/keymaps/default/keymap.c @@ -77,7 +77,7 @@ void rgb_matrix_indicators_user(void) void sdep_send(const uint8_t *cmd, uint8_t len) { - spi_start(AdafruitBleCSPin, false, 0, 2); + spi_start(ADAFRUIT_BLE_CS_PIN, false, 0, 2); uint8_t cnt = 200; bool ready = false; @@ -88,7 +88,7 @@ void sdep_send(const uint8_t *cmd, uint8_t len) { } spi_stop(); wait_us(25); - spi_start(AdafruitBleCSPin, false, 0, 2); + spi_start(ADAFRUIT_BLE_CS_PIN, false, 0, 2); } while (cnt--); if (ready) { diff --git a/keyboards/handwired/dactyl_manuform/5x6_2_5/config.h b/keyboards/handwired/dactyl_manuform/5x6_2_5/config.h index 79ea625d9e..cb147654ba 100644 --- a/keyboards/handwired/dactyl_manuform/5x6_2_5/config.h +++ b/keyboards/handwired/dactyl_manuform/5x6_2_5/config.h @@ -34,9 +34,6 @@ along with this program. If not, see . // // right half adafruit feather // #define MATRIX_COL_PINS { F1, F0, B1, B2, B3, D2 } // #define MATRIX_ROW_PINS { D6, B7, B6, B5, D7, C6 } -// #define AdafruitBleResetPin D4 -// #define AdafruitBleCSPin B4 -// #define AdafruitBleIRQPin E6 #define DIODE_DIRECTION COL2ROW diff --git a/keyboards/handwired/prkl30/feather/config.h b/keyboards/handwired/prkl30/feather/config.h index 6a9bce38cd..875b3d7401 100644 --- a/keyboards/handwired/prkl30/feather/config.h +++ b/keyboards/handwired/prkl30/feather/config.h @@ -35,9 +35,6 @@ #define ENCODERS_PAD_A { F7 } #define ENCODERS_PAD_B { F6 } #define ENCODER_RESOLUTION 4 -#define AdafruitBleResetPin D4 -#define AdafruitBleCSPin B4 -#define AdafruitBleIRQPin E6 #define UNUSED_PINS /* RGB Light Configuration */ diff --git a/keyboards/handwired/pterodactyl/config.h b/keyboards/handwired/pterodactyl/config.h index 9f5f1412b8..044fa12f78 100644 --- a/keyboards/handwired/pterodactyl/config.h +++ b/keyboards/handwired/pterodactyl/config.h @@ -60,7 +60,3 @@ along with this program. If not, see . /* Set 0 if debouncing isn't needed */ #define DEBOUNCE 0 - -#define AdafruitBleResetPin D4 -#define AdafruitBleCSPin B4 -#define AdafruitBleIRQPin E6 diff --git a/keyboards/spaceman/pancake/rev1/feather/config.h b/keyboards/spaceman/pancake/rev1/feather/config.h index e72b25f3db..cb80721e46 100644 --- a/keyboards/spaceman/pancake/rev1/feather/config.h +++ b/keyboards/spaceman/pancake/rev1/feather/config.h @@ -21,8 +21,4 @@ #define MATRIX_COL_PINS { C7, D6, B7, B6, F0, D2, D3, F1, F4, F5, F6, F7 } #define UNUSED_PINS -#define AdafruitBleResetPin D4 -#define AdafruitBleCSPin B4 -#define AdafruitBleIRQPin E6 - #define VIA_HAS_BROKEN_KEYCODES diff --git a/keyboards/tokyokeyboard/alix40/config.h b/keyboards/tokyokeyboard/alix40/config.h index 113412e95a..f4b4e6e5ab 100644 --- a/keyboards/tokyokeyboard/alix40/config.h +++ b/keyboards/tokyokeyboard/alix40/config.h @@ -65,9 +65,6 @@ along with this program. If not, see . #define QMK_ESC_INPUT D7 // usually ROW /* Bluetooth */ -#define AdafruitBleResetPin D4 -#define AdafruitBleCSPin B4 -#define AdafruitBleIRQPin E6 #define BATTERY_LEVEL_PIN B6 #define VIA_HAS_BROKEN_KEYCODES From f90d8b35f2c3ec1262db719bd66bcad6ef6f2773 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Fri, 8 Oct 2021 14:23:03 -0700 Subject: [PATCH 221/595] [Keyboard] Fix IS31FL3741 driver flushin for Xelus pachi rgb (#14755) --- keyboards/xelus/pachi/rgb/rgb.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/keyboards/xelus/pachi/rgb/rgb.c b/keyboards/xelus/pachi/rgb/rgb.c index 6f44b13e12..4f2f2c7b77 100644 --- a/keyboards/xelus/pachi/rgb/rgb.c +++ b/keyboards/xelus/pachi/rgb/rgb.c @@ -228,7 +228,11 @@ static void init(void) { IS31FL3741_update_led_control_registers(DRIVER_ADDR_1, 0); } -static void flush(void) { IS31FL3741_update_pwm_buffers(DRIVER_ADDR_1, DRIVER_ADDR_2); } +static void flush(void) { + IS31FL3741_update_pwm_buffers(DRIVER_ADDR_1, 0); + // Just for reference. Only first driver is used? + // IS31FL3741_update_pwm_buffers(DRIVER_ADDR_2, 1); +} const rgb_matrix_driver_t rgb_matrix_driver = { .init = init, From 7b753f227ada4c44df1e991b79e03fd6b56f7e69 Mon Sep 17 00:00:00 2001 From: Dasky <32983009+daskygit@users.noreply.github.com> Date: Fri, 8 Oct 2021 22:26:57 +0100 Subject: [PATCH 222/595] Enable eeprom with F401xE ld (#14752) --- common_features.mk | 2 +- .../chibios/boards/common/ld/STM32F401xE.ld | 85 +++++++++++++++++++ tmk_core/common/chibios/eeprom_stm32_defs.h | 6 +- 3 files changed, 89 insertions(+), 4 deletions(-) create mode 100644 platforms/chibios/boards/common/ld/STM32F401xE.ld diff --git a/common_features.mk b/common_features.mk index 3c956b7aaf..3158706f88 100644 --- a/common_features.mk +++ b/common_features.mk @@ -174,7 +174,7 @@ else SRC += $(PLATFORM_COMMON_DIR)/eeprom_stm32.c SRC += $(PLATFORM_COMMON_DIR)/flash_stm32.c OPT_DEFS += -DEEPROM_EMU_STM32F072xB - else ifneq ($(filter $(MCU_SERIES)_$(MCU_LDSCRIPT),STM32F4xx_STM32F401xC STM32F4xx_STM32F411xE STM32F4xx_STM32F405xG),) + else ifneq ($(filter $(MCU_SERIES)_$(MCU_LDSCRIPT),STM32F4xx_STM32F401xC STM32F4xx_STM32F401xE STM32F4xx_STM32F411xE STM32F4xx_STM32F405xG),) OPT_DEFS += -DEEPROM_DRIVER COMMON_VPATH += $(DRIVER_PATH)/eeprom SRC += eeprom_driver.c diff --git a/platforms/chibios/boards/common/ld/STM32F401xE.ld b/platforms/chibios/boards/common/ld/STM32F401xE.ld new file mode 100644 index 0000000000..69af7ed71e --- /dev/null +++ b/platforms/chibios/boards/common/ld/STM32F401xE.ld @@ -0,0 +1,85 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F401xE memory setup. + */ +MEMORY +{ + flash0 (rx) : org = 0x08000000, len = 16k /* Sector 0 - Init code as ROM bootloader assumes application starts here */ + flash1 (rx) : org = 0x08004000, len = 16k /* Sector 1 - Emulated eeprom */ + flash2 (rx) : org = 0x08008000, len = 512k - 32k /* Sector 2..7 - Rest of firmware */ + flash3 (rx) : org = 0x00000000, len = 0 + flash4 (rx) : org = 0x00000000, len = 0 + flash5 (rx) : org = 0x00000000, len = 0 + flash6 (rx) : org = 0x00000000, len = 0 + flash7 (rx) : org = 0x00000000, len = 0 + ram0 (wx) : org = 0x20000000, len = 96k + ram1 (wx) : org = 0x00000000, len = 0 + ram2 (wx) : org = 0x00000000, len = 0 + ram3 (wx) : org = 0x00000000, len = 0 + ram4 (wx) : org = 0x00000000, len = 0 + ram5 (wx) : org = 0x00000000, len = 0 + ram6 (wx) : org = 0x00000000, len = 0 + ram7 (wx) : org = 0x00000000, len = 0 +} + +/* For each data/text section two region are defined, a virtual region + and a load region (_LMA suffix).*/ + +/* Flash region to be used for exception vectors.*/ +REGION_ALIAS("VECTORS_FLASH", flash0); +REGION_ALIAS("VECTORS_FLASH_LMA", flash0); + +/* Flash region to be used for constructors and destructors.*/ +REGION_ALIAS("XTORS_FLASH", flash2); +REGION_ALIAS("XTORS_FLASH_LMA", flash2); + +/* Flash region to be used for code text.*/ +REGION_ALIAS("TEXT_FLASH", flash2); +REGION_ALIAS("TEXT_FLASH_LMA", flash2); + +/* Flash region to be used for read only data.*/ +REGION_ALIAS("RODATA_FLASH", flash2); +REGION_ALIAS("RODATA_FLASH_LMA", flash2); + +/* Flash region to be used for various.*/ +REGION_ALIAS("VARIOUS_FLASH", flash2); +REGION_ALIAS("VARIOUS_FLASH_LMA", flash2); + +/* Flash region to be used for RAM(n) initialization data.*/ +REGION_ALIAS("RAM_INIT_FLASH_LMA", flash2); + +/* RAM region to be used for Main stack. This stack accommodates the processing + of all exceptions and interrupts.*/ +REGION_ALIAS("MAIN_STACK_RAM", ram0); + +/* RAM region to be used for the process stack. This is the stack used by + the main() function.*/ +REGION_ALIAS("PROCESS_STACK_RAM", ram0); + +/* RAM region to be used for data segment.*/ +REGION_ALIAS("DATA_RAM", ram0); +REGION_ALIAS("DATA_RAM_LMA", flash2); + +/* RAM region to be used for BSS segment.*/ +REGION_ALIAS("BSS_RAM", ram0); + +/* RAM region to be used for the default heap.*/ +REGION_ALIAS("HEAP_RAM", ram0); + +/* Generic rules inclusion.*/ +INCLUDE rules.ld diff --git a/tmk_core/common/chibios/eeprom_stm32_defs.h b/tmk_core/common/chibios/eeprom_stm32_defs.h index cc64cda748..3499796264 100644 --- a/tmk_core/common/chibios/eeprom_stm32_defs.h +++ b/tmk_core/common/chibios/eeprom_stm32_defs.h @@ -32,7 +32,7 @@ # ifndef FEE_PAGE_COUNT # define FEE_PAGE_COUNT 4 // How many pages are used # endif -# elif defined(STM32F401xC) || defined(STM32F405xG) || defined(STM32F411xE) +# elif defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F405xG) || defined(STM32F411xE) # ifndef FEE_PAGE_SIZE # define FEE_PAGE_SIZE 0x4000 // Page size = 16KByte # endif @@ -49,7 +49,7 @@ # define FEE_MCU_FLASH_SIZE 128 // Size in Kb # elif defined(STM32F303xC) || defined(STM32F401xC) # define FEE_MCU_FLASH_SIZE 256 // Size in Kb -# elif defined(STM32F103xE) || defined(STM32F411xE) +# elif defined(STM32F103xE) || defined(STM32F401xE) || defined(STM32F411xE) # define FEE_MCU_FLASH_SIZE 512 // Size in Kb # elif defined(STM32F405xG) # define FEE_MCU_FLASH_SIZE 1024 // Size in Kb @@ -58,7 +58,7 @@ /* Start of the emulated eeprom */ #if !defined(FEE_PAGE_BASE_ADDRESS) -# if defined(STM32F401xC) || defined(STM32F405xG) || defined(STM32F411xE) +# if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F405xG) || defined(STM32F411xE) # ifndef FEE_PAGE_BASE_ADDRESS # define FEE_PAGE_BASE_ADDRESS 0x08004000 // bodge to force 2nd 16k page # endif From 22cafb9a2046b0c6c7b9df8c719cd515bec4d798 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Sat, 9 Oct 2021 14:46:47 +0100 Subject: [PATCH 223/595] Migrate satisfaction75 away from QWIIC_DRIVERS (#14747) * stash * refactor old draw * refactor old draw - tidy * refactor old draw - tidy * refactor old draw - reorder for diffs * refactor old draw - reorder for diffs --- keyboards/cannonkeys/satisfaction75/config.h | 10 +- keyboards/cannonkeys/satisfaction75/rules.mk | 5 +- .../satisfaction75/satisfaction75.c | 33 +- .../satisfaction75/satisfaction75.h | 11 - .../satisfaction75/satisfaction_encoder.c | 2 - .../satisfaction75/satisfaction_oled.c | 424 ++++++++---------- 6 files changed, 186 insertions(+), 299 deletions(-) diff --git a/keyboards/cannonkeys/satisfaction75/config.h b/keyboards/cannonkeys/satisfaction75/config.h index 43a872041c..7fca7226b1 100644 --- a/keyboards/cannonkeys/satisfaction75/config.h +++ b/keyboards/cannonkeys/satisfaction75/config.h @@ -71,14 +71,8 @@ along with this program. If not, see . /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE -#ifdef QWIIC_MICRO_OLED_ENABLE - -#undef I2C_ADDRESS_SA0_1 -#define I2C_ADDRESS_SA0_1 0b0111100 -#define LCDWIDTH 128 -#define LCDHEIGHT 32 - -#endif +// configure oled driver for the 128x32 oled +#define OLED_UPDATE_INTERVAL 66 // ~15fps // Custom config starts after VIA's EEPROM usage, // dynamic keymaps start after this. diff --git a/keyboards/cannonkeys/satisfaction75/rules.mk b/keyboards/cannonkeys/satisfaction75/rules.mk index 3f0f8cda7c..51f1dc52f5 100644 --- a/keyboards/cannonkeys/satisfaction75/rules.mk +++ b/keyboards/cannonkeys/satisfaction75/rules.mk @@ -23,10 +23,9 @@ CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover -CUSTOM_MATRIX = no # Custom matrix file ENCODER_ENABLE = yes -QWIIC_ENABLE = yes -QWIIC_DRIVERS += MICRO_OLED +OLED_ENABLE = yes +OLED_DRIVER = SSD1306 #BACKLIGHT_ENABLE = yes DEFAULT_FOLDER = cannonkeys/satisfaction75/rev1 diff --git a/keyboards/cannonkeys/satisfaction75/satisfaction75.c b/keyboards/cannonkeys/satisfaction75/satisfaction75.c index 682805f321..304df33258 100644 --- a/keyboards/cannonkeys/satisfaction75/satisfaction75.c +++ b/keyboards/cannonkeys/satisfaction75/satisfaction75.c @@ -5,11 +5,6 @@ #include #include -#ifdef QWIIC_MICRO_OLED_ENABLE -#include "micro_oled.h" -#include "qwiic.h" -#endif - #include "timer.h" #include "raw_hid.h" @@ -20,18 +15,14 @@ /* Artificial delay added to get media keys to work in the encoder*/ #define MEDIA_KEY_DELAY 10 -uint16_t last_flush; - volatile uint8_t led_numlock = false; volatile uint8_t led_capslock = false; volatile uint8_t led_scrolllock = false; uint8_t layer; -bool queue_for_send = false; bool clock_set_mode = false; uint8_t oled_mode = OLED_DEFAULT; -bool oled_sleeping = false; uint8_t encoder_value = 32; uint8_t encoder_mode = ENC_MODE_VOLUME; @@ -167,7 +158,6 @@ void raw_hid_receive_kb( uint8_t *data, uint8_t length ) case id_oled_mode: { oled_mode = command_data[1]; - draw_ui(); break; } case id_encoder_modes: @@ -247,18 +237,15 @@ void read_host_led_state(void) { layer_state_t layer_state_set_kb(layer_state_t state) { state = layer_state_set_user(state); layer = biton32(state); - queue_for_send = true; return state; } bool process_record_kb(uint16_t keycode, keyrecord_t *record) { - queue_for_send = true; switch (keycode) { case OLED_TOGG: if(!clock_set_mode){ if (record->event.pressed) { oled_mode = (oled_mode + 1) % _NUM_OLED_MODES; - draw_ui(); } } return false; @@ -303,7 +290,6 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) { bool encoder_update_kb(uint8_t index, bool clockwise) { if (!encoder_update_user(index, clockwise)) return false; encoder_value = (encoder_value + (clockwise ? 1 : -1)) % 64; - queue_for_send = true; if (index == 0) { if (layer == 0){ uint16_t mapped_code = 0; @@ -376,7 +362,6 @@ void matrix_init_kb(void) #endif // VIA_ENABLE rtcGetTime(&RTCD1, &last_timespec); - queue_for_send = true; backlight_init_ports(); matrix_init_user(); } @@ -388,22 +373,14 @@ void housekeeping_task_kb(void) { if (minutes_since_midnight != last_minute){ last_minute = minutes_since_midnight; - if(!oled_sleeping){ - queue_for_send = true; - } } -#ifdef QWIIC_MICRO_OLED_ENABLE - if (queue_for_send && oled_mode != OLED_OFF) { - oled_sleeping = false; - read_host_led_state(); - draw_ui(); - queue_for_send = false; + + if((oled_mode == OLED_OFF) && is_oled_on()){ + oled_off(); } - if (timer_elapsed(last_flush) > ScreenOffInterval && !oled_sleeping) { - send_command(DISPLAYOFF); /* 0xAE */ - oled_sleeping = true; + if((oled_mode != OLED_OFF) && !is_oled_on()){ + oled_on(); } -#endif } // diff --git a/keyboards/cannonkeys/satisfaction75/satisfaction75.h b/keyboards/cannonkeys/satisfaction75/satisfaction75.h index 13aaf68882..9d20dd9c93 100644 --- a/keyboards/cannonkeys/satisfaction75/satisfaction75.h +++ b/keyboards/cannonkeys/satisfaction75/satisfaction75.h @@ -14,9 +14,6 @@ #define EEPROM_DEFAULT_OLED (VIA_EEPROM_CUSTOM_CONFIG_ADDR+2) #define EEPROM_CUSTOM_ENCODER (VIA_EEPROM_CUSTOM_CONFIG_ADDR+3) -/* screen off after this many milliseconds */ -#define ScreenOffInterval 60000 /* milliseconds */ - typedef union { uint8_t raw; struct { @@ -74,10 +71,7 @@ extern volatile uint8_t led_scrolllock; extern uint8_t layer; // OLED Behavior -extern uint16_t last_flush; -extern bool queue_for_send; extern uint8_t oled_mode; -extern bool oled_sleeping; // Encoder Behavior extern uint8_t encoder_value; @@ -113,11 +107,6 @@ void set_custom_encoder_config(uint8_t encoder_idx, uint8_t behavior, uint16_t n void update_time_config(int8_t increment); -__attribute__ ((weak)) -void draw_ui(void); -void draw_default(void); -void draw_clock(void); - void backlight_init_ports(void); void backlight_set(uint8_t level); bool is_breathing(void); diff --git a/keyboards/cannonkeys/satisfaction75/satisfaction_encoder.c b/keyboards/cannonkeys/satisfaction75/satisfaction_encoder.c index 8fcd720e2f..cefdbc5f9c 100644 --- a/keyboards/cannonkeys/satisfaction75/satisfaction_encoder.c +++ b/keyboards/cannonkeys/satisfaction75/satisfaction_encoder.c @@ -125,7 +125,6 @@ uint16_t handle_encoder_clockwise(){ #endif case ENC_MODE_CLOCK_SET: update_time_config(1); - queue_for_send = true; break; } return mapped_code; @@ -171,7 +170,6 @@ uint16_t handle_encoder_ccw(){ case ENC_MODE_CLOCK_SET: update_time_config(-1); - queue_for_send = true; break; } return mapped_code; diff --git a/keyboards/cannonkeys/satisfaction75/satisfaction_oled.c b/keyboards/cannonkeys/satisfaction75/satisfaction_oled.c index 6553bd1300..9589ecea86 100644 --- a/keyboards/cannonkeys/satisfaction75/satisfaction_oled.c +++ b/keyboards/cannonkeys/satisfaction75/satisfaction_oled.c @@ -1,271 +1,201 @@ #include "satisfaction75.h" -#include "micro_oled.h" - -__attribute__ ((weak)) -void draw_ui() { -#ifdef QWIIC_MICRO_OLED_ENABLE - clear_buffer(); - last_flush = timer_read(); - send_command(DISPLAYON); - if(clock_set_mode){ - draw_clock(); - return; - } - switch (oled_mode){ - default: - case OLED_DEFAULT: - draw_default(); - break; - case OLED_TIME: - draw_clock(); - break; - case OLED_OFF: - send_command(DISPLAYOFF); - break; - } -#endif + +void draw_default(void); +void draw_clock(void); + +#ifdef OLED_ENABLE + +__attribute__((weak)) oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_0; } + +__attribute__((weak)) void oled_task_user(void) { + if (!is_oled_on()) { + return; + } + oled_clear(); + if (clock_set_mode) { + draw_clock(); + return; + } + switch (oled_mode) { + default: + case OLED_DEFAULT: + draw_default(); + break; + case OLED_TIME: + draw_clock(); + break; + } } -void draw_encoder(int8_t startX, int8_t startY, bool show_legend){ - if(show_legend){ - draw_string(startX + 1, startY + 2, "ENC", PIXEL_ON, NORM, 0); - } else { - startX -= 22; - } - draw_rect_filled_soft(startX + 22, startY + 1, 3 + (3 * 6), 9, PIXEL_ON, NORM); - char* mode_string = ""; - switch(encoder_mode){ - default: - case ENC_MODE_VOLUME: - mode_string = "VOL"; - break; - case ENC_MODE_MEDIA: - mode_string = "MED"; - break; - case ENC_MODE_SCROLL: - mode_string = "SCR"; - break; - case ENC_MODE_BRIGHTNESS: - mode_string = "BRT"; - break; - case ENC_MODE_BACKLIGHT: - mode_string = "BKL"; - break; - case ENC_MODE_CLOCK_SET: - mode_string = "CLK"; - break; - case ENC_MODE_CUSTOM0: - mode_string = "CS0"; - break; - case ENC_MODE_CUSTOM1: - mode_string = "CS1"; - break; - case ENC_MODE_CUSTOM2: - mode_string = "CS2"; - break; - } - draw_string(startX + 24, startY + 2, mode_string, PIXEL_ON, XOR, 0); + +static void draw_line_h(uint8_t x, uint8_t y, uint8_t len) { + for (uint8_t i = 0; i < len; i++) { + oled_write_pixel(i + x, y, true); + } } -void draw_layer_section(int8_t startX, int8_t startY, bool show_legend){ - if(show_legend){ - draw_string(startX + 1, startY + 2, "LAYER", PIXEL_ON, NORM, 0); - } else { - startX -= 32; - } - draw_rect_filled_soft(startX + 32, startY + 1, 9, 9, PIXEL_ON, NORM); - draw_char(startX + 34, startY + 2, layer + 0x30, PIXEL_ON, XOR, 0); +static void draw_line_v(uint8_t x, uint8_t y, uint8_t len) { + for (uint8_t i = 0; i < len; i++) { + oled_write_pixel(x, i + y, true); + } } -void draw_default(){ - uint8_t hour = last_minute / 60; - uint16_t minute = last_minute % 60; +static char* get_enc_mode(void) { + switch (encoder_mode) { + default: + case ENC_MODE_VOLUME: + return "VOL"; + case ENC_MODE_MEDIA: + return "MED"; + case ENC_MODE_SCROLL: + return "SCR"; + case ENC_MODE_BRIGHTNESS: + return "BRT"; + case ENC_MODE_BACKLIGHT: + return "BKL"; + case ENC_MODE_CLOCK_SET: + return "CLK"; + case ENC_MODE_CUSTOM0: + return "CS0"; + case ENC_MODE_CUSTOM1: + return "CS1"; + case ENC_MODE_CUSTOM2: + return "CS2"; + } +} - if(encoder_mode == ENC_MODE_CLOCK_SET){ - hour = hour_config; - minute = minute_config; - } +static char* get_time(void) { + uint8_t hour = last_minute / 60; + uint16_t minute = last_minute % 60; - bool is_pm = (hour / 12) > 0; - hour = hour % 12; - if (hour == 0){ - hour = 12; - } - char hour_str[3] = ""; - char min_str[3] = ""; + if (encoder_mode == ENC_MODE_CLOCK_SET) { + hour = hour_config; + minute = minute_config; + } - sprintf(hour_str, "%02d", hour); - sprintf(min_str, "%02d", minute); + bool is_pm = (hour / 12) > 0; + hour = hour % 12; + if (hour == 0) { + hour = 12; + } - uint8_t mods = get_mods(); + static char time_str[8] = ""; + sprintf(time_str, "%02d:%02d%s", hour, minute, is_pm ? "pm" : "am"); -/* Layer indicator is 41 x 10 pixels */ - draw_layer_section(0,0,true); + return time_str; +} -#define ENCODER_INDICATOR_X 45 -#define ENCODER_INDICATOR_Y 0 - draw_encoder(ENCODER_INDICATOR_X, ENCODER_INDICATOR_Y, true); -/* Matrix display is 19 x 9 pixels */ -#define MATRIX_DISPLAY_X 0 -#define MATRIX_DISPLAY_Y 18 +static char* get_date(void) { + int16_t year = last_timespec.year + 1980; + int8_t month = last_timespec.month; + int8_t day = last_timespec.day; - for (uint8_t x = 0; x < MATRIX_ROWS; x++) { - for (uint8_t y = 0; y < MATRIX_COLS; y++) { - draw_pixel(MATRIX_DISPLAY_X + y + 2, MATRIX_DISPLAY_Y + x + 2,(matrix_get_row(x) & (1 << y)) > 0, NORM); + if (encoder_mode == ENC_MODE_CLOCK_SET) { + year = year_config + 1980; + month = month_config; + day = day_config; } - } - draw_rect_soft(MATRIX_DISPLAY_X, MATRIX_DISPLAY_Y, 19, 9, PIXEL_ON, NORM); - /* hadron oled location on thumbnail */ - draw_rect_filled_soft(MATRIX_DISPLAY_X + 14, MATRIX_DISPLAY_Y + 2, 3, 1, PIXEL_ON, NORM); - -/* Mod display is 41 x 16 pixels */ -#define MOD_DISPLAY_X 30 -#define MOD_DISPLAY_Y 18 - - if (mods & MOD_LSFT) { - draw_rect_filled_soft(MOD_DISPLAY_X + 0, MOD_DISPLAY_Y, 5 + (1 * 6), 11, PIXEL_ON, NORM); - draw_string(MOD_DISPLAY_X + 3, MOD_DISPLAY_Y + 2, "S", PIXEL_OFF, NORM, 0); - } else { - draw_string(MOD_DISPLAY_X + 3, MOD_DISPLAY_Y + 2, "S", PIXEL_ON, NORM, 0); - } - if (mods & MOD_LCTL) { - draw_rect_filled_soft(MOD_DISPLAY_X + 10, MOD_DISPLAY_Y, 5 + (1 * 6), 11, PIXEL_ON, NORM); - draw_string(MOD_DISPLAY_X + 13, MOD_DISPLAY_Y + 2, "C", PIXEL_OFF, NORM, 0); - } else { - draw_string(MOD_DISPLAY_X + 13, MOD_DISPLAY_Y + 2, "C", PIXEL_ON, NORM, 0); - } - if (mods & MOD_LALT) { - draw_rect_filled_soft(MOD_DISPLAY_X + 20, MOD_DISPLAY_Y, 5 + (1 * 6), 11, PIXEL_ON, NORM); - draw_string(MOD_DISPLAY_X + 23, MOD_DISPLAY_Y + 2, "A", PIXEL_OFF, NORM, 0); - } else { - draw_string(MOD_DISPLAY_X + 23, MOD_DISPLAY_Y + 2, "A", PIXEL_ON, NORM, 0); - } - if (mods & MOD_LGUI) { - draw_rect_filled_soft(MOD_DISPLAY_X + 30, MOD_DISPLAY_Y, 5 + (1 * 6), 11, PIXEL_ON, NORM); - draw_string(MOD_DISPLAY_X + 33, MOD_DISPLAY_Y + 2, "G", PIXEL_OFF, NORM, 0); - } else { - draw_string(MOD_DISPLAY_X + 33, MOD_DISPLAY_Y + 2, "G", PIXEL_ON, NORM, 0); - } - -/* Lock display is 23 x 21 */ -#define LOCK_DISPLAY_X 100 -#define LOCK_DISPLAY_Y 0 - - if (led_capslock == true) { - draw_rect_filled_soft(LOCK_DISPLAY_X + 0, LOCK_DISPLAY_Y, 5 + (3 * 6), 9, PIXEL_ON, NORM); - draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y +1, "CAP", PIXEL_OFF, NORM, 0); - } else if (led_capslock == false) { - draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y +1, "CAP", PIXEL_ON, NORM, 0); - } - - if (led_scrolllock == true) { - draw_rect_filled_soft(LOCK_DISPLAY_X + 0, LOCK_DISPLAY_Y + 11, 5 + (3 * 6), 9, PIXEL_ON, NORM); - draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y + 11 +1, "SCR", PIXEL_OFF, NORM, 0); - } else if (led_scrolllock == false) { - draw_string(LOCK_DISPLAY_X + 3, LOCK_DISPLAY_Y + 11 +1, "SCR", PIXEL_ON, NORM, 0); - } - -#define TIME_DISPLAY_X 82 -#define TIME_DISPLAY_Y 22 - draw_string(TIME_DISPLAY_X, TIME_DISPLAY_Y, hour_str, PIXEL_ON, NORM, 0); - draw_string(TIME_DISPLAY_X + 11, TIME_DISPLAY_Y, ":", PIXEL_ON, NORM, 0); - draw_string(TIME_DISPLAY_X + 15, TIME_DISPLAY_Y, min_str, PIXEL_ON, NORM, 0); - if(is_pm){ - draw_string(TIME_DISPLAY_X + 27, TIME_DISPLAY_Y, "pm", PIXEL_ON, NORM, 0); - } else{ - draw_string(TIME_DISPLAY_X + 27, TIME_DISPLAY_Y, "am", PIXEL_ON, NORM, 0); - } - - send_buffer(); + + static char date_str[11] = ""; + sprintf(date_str, "%04d-%02d-%02d", year, month, day); + + return date_str; } -void draw_clock(){ - int8_t hour = last_minute / 60; - int16_t minute = last_minute % 60; - int16_t year = last_timespec.year + 1980; - int8_t month = last_timespec.month; - int8_t day = last_timespec.day; - - if(encoder_mode == ENC_MODE_CLOCK_SET){ - hour = hour_config; - minute = minute_config; - year = year_config + 1980; - month = month_config; - day = day_config; - } - - bool is_pm = (hour / 12) > 0; - hour = hour % 12; - if (hour == 0){ - hour = 12; - } - char hour_str[3] = ""; - char min_str[3] = ""; - char year_str[5] = ""; - char month_str[3] = ""; - char day_str[3] = ""; - - sprintf(hour_str, "%02d", hour); - sprintf(min_str, "%02d", minute); - sprintf(year_str, "%d", year); - sprintf(month_str, "%02d", month); - sprintf(day_str, "%02d", day); - - -#define DATE_DISPLAY_X 6 -#define DATE_DISPLAY_Y 0 - draw_string(DATE_DISPLAY_X, DATE_DISPLAY_Y, year_str, PIXEL_ON, NORM, 0); - draw_string(DATE_DISPLAY_X + 25, DATE_DISPLAY_Y, "-", PIXEL_ON, NORM, 0); - draw_string(DATE_DISPLAY_X + 31, DATE_DISPLAY_Y, month_str, PIXEL_ON, NORM, 0); - draw_string(DATE_DISPLAY_X + 44, DATE_DISPLAY_Y, "-", PIXEL_ON, NORM, 0); - draw_string(DATE_DISPLAY_X + 50, DATE_DISPLAY_Y, day_str, PIXEL_ON, NORM, 0); - -#define CLOCK_DISPLAY_X 6 -#define CLOCK_DISPLAY_Y 14 - draw_string(CLOCK_DISPLAY_X, CLOCK_DISPLAY_Y, hour_str, PIXEL_ON, NORM, 1); - draw_string(CLOCK_DISPLAY_X + 17, CLOCK_DISPLAY_Y, ":", PIXEL_ON, NORM, 1); - draw_string(CLOCK_DISPLAY_X + 25, CLOCK_DISPLAY_Y, min_str, PIXEL_ON, NORM, 1); - if(is_pm){ - draw_string(CLOCK_DISPLAY_X + 41, CLOCK_DISPLAY_Y, "pm", PIXEL_ON, NORM, 1); - } else{ - draw_string(CLOCK_DISPLAY_X + 41, CLOCK_DISPLAY_Y, "am", PIXEL_ON, NORM, 1); - } - - if(clock_set_mode){ - switch(time_config_idx){ - case 0: // hour - default: - draw_line(CLOCK_DISPLAY_X, CLOCK_DISPLAY_Y + 17, CLOCK_DISPLAY_X + 16, CLOCK_DISPLAY_Y + 17, PIXEL_ON, NORM); - break; - case 1: // minute - draw_line(CLOCK_DISPLAY_X + 25, CLOCK_DISPLAY_Y + 17, CLOCK_DISPLAY_X + 41, CLOCK_DISPLAY_Y + 17, PIXEL_ON, NORM); - break; - case 2: // year - draw_line(DATE_DISPLAY_X, DATE_DISPLAY_Y + 9, DATE_DISPLAY_X + 23, DATE_DISPLAY_Y + 9, PIXEL_ON, NORM); - break; - case 3: // month - draw_line(DATE_DISPLAY_X + 31, DATE_DISPLAY_Y + 9, DATE_DISPLAY_X + 43, DATE_DISPLAY_Y + 9, PIXEL_ON, NORM); - break; - case 4: //day - draw_line(DATE_DISPLAY_X + 50, DATE_DISPLAY_Y + 9, DATE_DISPLAY_X + 61, DATE_DISPLAY_Y + 9,PIXEL_ON, NORM); - break; - } - } +void draw_default() { + oled_write_P(PSTR("LAYER "), false); + oled_write_char(get_highest_layer(layer_state) + 0x30, true); + + oled_write_P(PSTR(" ENC "), false); + oled_write(get_enc_mode(), true); + + led_t led_state = host_keyboard_led_state(); + oled_set_cursor(18, 0); + oled_write_P(PSTR("CAP"), led_state.caps_lock); + oled_set_cursor(18, 1); + oled_write_P(PSTR("SCR"), led_state.scroll_lock); + + uint8_t mod_state = get_mods(); + oled_set_cursor(6, 3); + oled_write_P(PSTR("S"), mod_state & MOD_MASK_SHIFT); + oled_advance_char(); + oled_write_P(PSTR("C"), mod_state & MOD_MASK_CTRL); + oled_advance_char(); + oled_write_P(PSTR("A"), mod_state & MOD_MASK_ALT); + oled_advance_char(); + oled_write_P(PSTR("G"), mod_state & MOD_MASK_GUI); + oled_advance_char(); + + oled_write(get_time(), false); + +/* Matrix display is 12 x 12 pixels */ +#define MATRIX_DISPLAY_X 0 +#define MATRIX_DISPLAY_Y 18 - draw_encoder(80, 0, true); - draw_layer_section(80, 11, true); + // matrix + for (uint8_t x = 0; x < MATRIX_ROWS; x++) { + for (uint8_t y = 0; y < MATRIX_COLS; y++) { + bool on = (matrix_get_row(x) & (1 << y)) > 0; + oled_write_pixel(MATRIX_DISPLAY_X + y + 2, MATRIX_DISPLAY_Y + x + 2, on); + } + } -#define CAPS_DISPLAY_X 86 -#define CAPS_DISPLAY_Y 22 + // outline + draw_line_h(MATRIX_DISPLAY_X, MATRIX_DISPLAY_Y, 19); + draw_line_h(MATRIX_DISPLAY_X, MATRIX_DISPLAY_Y + 9, 19); + draw_line_v(MATRIX_DISPLAY_X, MATRIX_DISPLAY_Y, 9); + draw_line_v(MATRIX_DISPLAY_X + 19, MATRIX_DISPLAY_Y, 9); - if (led_capslock == true) { - draw_rect_filled_soft(CAPS_DISPLAY_X, CAPS_DISPLAY_Y, 5 + (4 * 6), 9, PIXEL_ON, NORM); - draw_string(CAPS_DISPLAY_X + 3, CAPS_DISPLAY_Y +1, "CAPS", PIXEL_OFF, NORM, 0); - } else if (led_capslock == false) { - draw_string(CAPS_DISPLAY_X + 3, CAPS_DISPLAY_Y +1, "CAPS", PIXEL_ON, NORM, 0); - } + // oled location + draw_line_h(MATRIX_DISPLAY_X + 14, MATRIX_DISPLAY_Y + 2, 3); + // bodge extra lines for invert layer and enc mode + draw_line_v(35, 0, 8); + draw_line_v(71, 0, 8); +} - send_buffer(); +void draw_clock() { + oled_set_cursor(0, 0); + oled_write(get_date(), false); + oled_set_cursor(0, 2); + oled_write(get_time(), false); + + oled_set_cursor(12, 0); + oled_write_P(PSTR(" ENC "), false); + oled_write(get_enc_mode(), true); + + oled_set_cursor(13, 1); + oled_write_P(PSTR("LAYER "), false); + oled_write_char(get_highest_layer(layer_state) + 0x30, true); + + led_t led_state = host_keyboard_led_state(); + oled_set_cursor(15, 3); + oled_write_P(PSTR("CAPS"), led_state.caps_lock); + + if (clock_set_mode) { + switch (time_config_idx) { + case 0: // hour + default: + draw_line_h(0, 25, 10); + break; + case 1: // minute + draw_line_h(18, 25, 10); + break; + case 2: // year + draw_line_h(0, 9, 24); + break; + case 3: // month + draw_line_h(30, 9, 10); + break; + case 4: // day + draw_line_h(48, 9, 10); + break; + } + } + // bodge extra lines for invert layer and enc mode + draw_line_v(101, 0, 8); + draw_line_v(113, 8, 8); } + +#endif From dace4d5f0db758302c0df84a993583ca3cc46bbf Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Sat, 9 Oct 2021 14:48:27 +0100 Subject: [PATCH 224/595] Remove QWIIC_DRIVERS (#14174) --- common_features.mk | 2 - drivers/qwiic/micro_oled.c | 482 ---------------------------------- drivers/qwiic/micro_oled.h | 134 ---------- drivers/qwiic/qwiic.c | 31 --- drivers/qwiic/qwiic.h | 28 -- drivers/qwiic/qwiic.mk | 17 -- drivers/qwiic/util/font5x7.h | 39 --- drivers/qwiic/util/font8x16.h | 39 --- lib/python/qmk/info.py | 2 +- quantum/keyboard.c | 10 - 10 files changed, 1 insertion(+), 783 deletions(-) delete mode 100644 drivers/qwiic/micro_oled.c delete mode 100644 drivers/qwiic/micro_oled.h delete mode 100644 drivers/qwiic/qwiic.c delete mode 100644 drivers/qwiic/qwiic.h delete mode 100644 drivers/qwiic/qwiic.mk delete mode 100644 drivers/qwiic/util/font5x7.h delete mode 100644 drivers/qwiic/util/font8x16.h diff --git a/common_features.mk b/common_features.mk index 3158706f88..3fe834219f 100644 --- a/common_features.mk +++ b/common_features.mk @@ -613,8 +613,6 @@ ifeq ($(strip $(ST7565_ENABLE)), yes) SRC += st7565.c endif -include $(DRIVER_PATH)/qwiic/qwiic.mk - ifeq ($(strip $(UCIS_ENABLE)), yes) OPT_DEFS += -DUCIS_ENABLE UNICODE_COMMON := yes diff --git a/drivers/qwiic/micro_oled.c b/drivers/qwiic/micro_oled.c deleted file mode 100644 index 8dfff6968f..0000000000 --- a/drivers/qwiic/micro_oled.c +++ /dev/null @@ -1,482 +0,0 @@ -/* Jim Lindblom @ SparkFun Electronics - * October 26, 2014 - * https://github.com/sparkfun/Micro_OLED_Breakout/tree/master/Firmware/Arduino/libraries/SFE_MicroOLED - * - * Modified by: - * Emil Varughese @ Edwin Robotics Pvt. Ltd. - * July 27, 2015 - * https://github.com/emil01/SparkFun_Micro_OLED_Arduino_Library/ - * - * This code was heavily based around the MicroView library, written by GeekAmmo - * (https://github.com/geekammo/MicroView-Arduino-Library). - * - * Adapted for QMK by: - * Jack Humbert - * October 11, 2018 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "micro_oled.h" -#include "print.h" -#include -#include "util/font5x7.h" -#include "util/font8x16.h" -#include - -#define TOTALFONTS 2 -const unsigned char* fonts_pointer[] = {font5x7, font8x16}; - -uint8_t foreColor, drawMode, fontWidth, fontHeight, fontType, fontStartChar, fontTotalChar, cursorX, cursorY; -uint16_t fontMapWidth; - -#ifndef _BV -# define _BV(x) (1 << (x)) -#endif - -#define swap(a, b) \ - { \ - uint8_t t = a; \ - a = b; \ - b = t; \ - } - -uint8_t micro_oled_transfer_buffer[20]; -static uint8_t micro_oled_screen_current[LCDWIDTH * LCDHEIGHT / 8] = {0}; - -/* LCD Memory organised in 64 horizontal pixel and 6 rows of byte - B B .............B ----- - y y .............y \ - t t .............t \ - e e .............e \ - 0 1 .............63 \ - \ - D0 D0.............D0 \ - D1 D1.............D1 / ROW 0 - D2 D2.............D2 / - D3 D3.............D3 / - D4 D4.............D4 / - D5 D5.............D5 / - D6 D6.............D6 / - D7 D7.............D7 ---- - */ -#ifdef NO_LCD_SPLASH -// do not initialize with a splash screen -static uint8_t micro_oled_screen_buffer[LCDWIDTH * LCDHEIGHT / 8] = {0}; -#else -# if LCDWIDTH == 64 -# if LCDHEIGHT == 48 -static uint8_t micro_oled_screen_buffer[] = { - // QMK Logo - generated at http://www.majer.ch/lcd/adf_bitmap.php - // 64x48 image - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x60, 0x60, 0x60, 0xF8, 0xFE, 0xFE, 0xFF, 0xFF, 0xFF, 0x1F, 0x1F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x1F, 0x1F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x1F, 0x1F, 0xFF, 0xFF, 0xFF, 0xFE, 0xFE, 0xF8, 0x60, 0x60, 0x60, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x8C, 0x8C, 0x8C, 0x8C, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x8C, 0x8C, 0x8C, 0x8C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x31, 0x31, 0x31, 0x31, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC, 0xF8, 0xF1, 0xE3, 0xE7, 0xCF, 0xCF, 0xCF, 0xCF, 0x00, 0x00, 0xCF, 0xCF, 0xCF, 0xC7, 0xE7, 0xE3, 0xF1, 0xF8, 0xFC, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x31, 0x31, 0x31, 0x31, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x06, 0x06, 0x06, 0x1F, 0x7F, 0x7F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xF8, 0xF8, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x7F, 0x7F, 0x1F, 0x06, 0x06, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x0F, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}; -# endif -# elif LCDWIDTH == 128 -# if LCDHEIGHT == 32 -static uint8_t micro_oled_screen_buffer[LCDWIDTH * LCDHEIGHT / 8] = { - // 128x32 qmk image - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xC0, 0xE0, 0xE0, 0xFC, 0xFC, 0xE0, 0xFC, 0xFC, 0xE0, 0xF0, 0xFC, 0xE0, 0xE0, 0xFC, 0xE0, 0xE0, 0xFC, 0xFC, 0xE0, 0xE0, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x10, 0x10, 0x30, 0xE0, 0x00, 0x00, 0x80, 0x80, 0x80, 0x80, 0x80, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x80, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80, 0x00, 0x00, 0x80, 0x80, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80, 0x80, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x12, 0xB2, 0xB2, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x01, 0x03, 0xFF, 0xFF, 0xFF, 0x03, 0x01, 0xFF, 0xFF, 0xFF, 0xFF, 0x01, 0x03, 0xFF, 0xFF, 0xFF, 0xFF, 0xB7, 0xB2, 0xB2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x02, 0x02, 0x03, 0x01, 0x00, 0x06, 0x1F, 0x10, 0x10, 0x10, 0x1F, 0x06, 0x00, 0x03, 0x1E, 0x18, 0x0F, 0x01, 0x0F, 0x18, 0x1E, 0x01, 0x00, 0x0F, 0x1F, 0x12, 0x02, 0x12, 0x13, 0x00, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x0E, 0x1F, 0x12, 0x02, 0x12, 0x13, 0x00, 0x00, 0x1F, 0x10, 0x10, 0x10, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x48, 0x4D, 0x4D, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFE, 0xF8, 0xF9, 0xF3, 0xF3, 0xC0, 0x80, 0xF3, 0xF3, 0xF3, 0xF9, 0xFC, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xED, 0x4D, 0x4D, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x20, 0x10, 0x10, 0xE0, 0xC0, 0x00, 0x70, 0xC0, 0x00, 0x80, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x0C, 0x04, 0x04, 0x04, 0x04, 0x1C, 0xF0, 0x00, 0x00, 0xFC, 0x0C, 0x38, 0xE0, 0x00, 0x00, 0xC0, 0x38, 0x0C, 0xFC, 0x00, 0x00, 0xFC, 0xFC, 0x60, 0x90, 0x0C, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x03, 0x07, 0x07, 0x3F, 0x3F, 0x07, 0x3F, 0x3F, 0x07, 0x0F, 0x3F, 0x07, 0x07, 0x3F, 0x07, 0x07, 0x3F, 0x3F, 0x07, 0x07, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x06, 0x04, 0x04, 0x07, 0x01, 0x00, 0x00, 0x13, 0x1E, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x06, 0x04, 0x04, 0x04, 0x04, 0x07, 0x0D, 0x08, 0x00, 0x07, 0x00, 0x00, 0x01, 0x07, 0x07, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x07, 0x07, 0x00, 0x01, 0x03, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}; -# elif LCDHEIGHT == 64 -static uint8_t micro_oled_screen_buffer[LCDWIDTH * LCDHEIGHT / 8] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0xC0, 0xC0, 0xC0, 0xF8, 0xFC, 0xFC, 0xFE, 0xFE, 0xFF, 0x7F, 0x7E, 0xFE, 0xFF, 0xFF, 0xFE, 0xFE, 0x7F, 0x7F, 0xFE, 0xFE, 0xFF, 0xFF, 0xFE, 0x7E, 0x7F, 0xFF, 0xFE, 0xFE, 0xFC, 0xFC, 0xF8, 0xC0, 0xC0, 0xC0, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x88, 0x88, 0x88, 0xDD, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xDD, 0x88, 0x88, 0x88, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x99, 0x99, 0x99, 0x99, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFE, 0xF8, 0xF0, 0xF3, 0xF3, 0xE7, 0xE7, 0x00, 0x00, 0xE7, 0xE7, 0xF3, 0xF3, 0xF0, 0xF8, 0xFE, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x99, 0x99, 0x99, 0x99, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x0F, 0x1F, 0x3F, 0x3F, 0x3F, 0xFF, 0xFF, 0x3F, 0x3F, 0xFF, 0xFF, 0x3F, 0x3F, 0xFF, 0xFF, 0x3F, 0x3F, 0xFF, 0xFF, 0x3F, 0x3F, 0xFF, 0xFF, 0x3F, 0x3F, 0x3F, 0x1F, 0x0F, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x01, 0x00, 0x00, 0x03, 0x01, 0x00, 0x80, 0x03, 0x03, 0x00, 0x00, 0x01, 0x03, 0x00, 0x80, 0x01, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0x11, 0x11, 0x11, 0x0E, 0x00, 0x70, 0x88, 0x04, 0x04, 0x04, 0xF8, 0x00, 0x00, 0x3C, 0xE0, 0xC0, 0x38, 0x1C, 0xE0, 0x80, 0x70, 0x0C, 0x00, 0xF8, 0xAC, 0x24, 0x24, 0x3C, 0x30, 0x00, 0x00, 0xFC, 0x0C, 0x04, 0x00, 0xF8, 0xAC, 0x24, 0x24, 0x2C, 0x30, 0x00, 0x70, 0xDC, 0x04, 0x04, 0x88, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0x8C, 0x04, 0x04, 0xF8, 0x00, 0x04, 0x3C, 0xE0, 0x80, 0xF0, 0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x83, 0x01, 0x01, 0x01, 0x81, 0xFE, 0x3C, 0x00, 0x00, 0xFF, 0x03, 0x0E, 0x70, 0xC0, 0xE0, 0x38, 0x06, 0x03, 0xFF, 0x00, 0x00, 0xFF, 0x18, 0x38, 0x66, 0xC3, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x03, 0x02, 0x00, 0x01, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}; -// TODO: generate bitmap of QMK logo here -# endif -# else -// catchall for custom screen sizes -static uint8_t micro_oled_screen_buffer[LCDWIDTH * LCDHEIGHT / 8] = {0}; -# endif -#endif - -void micro_oled_init(void) { - i2c_init(); - -#ifdef __AVR__ - i2c_start(I2C_ADDRESS_SA0_1, 100); -#else - i2c_start(I2C_ADDRESS_SA0_1); -#endif - - // Display Init sequence for 64x48 OLED module - send_command(DISPLAYOFF); // 0xAE - - send_command(SETDISPLAYCLOCKDIV); // 0xD5 - send_command(0x80); // the suggested ratio 0x80 - - send_command(SETMULTIPLEX); // 0xA8 - send_command(LCDHEIGHT - 1); - - send_command(SETDISPLAYOFFSET); // 0xD3 - send_command(0x00); // no offset - - send_command(SETSTARTLINE | 0x00); // line #0 - - send_command(CHARGEPUMP); // enable charge pump - send_command(0x14); - - send_command(NORMALDISPLAY); // 0xA6 - send_command(DISPLAYALLONRESUME); // 0xA4 - - // display at regular orientation - send_command(SEGREMAP | 0x1); - send_command(COMSCANDEC); - -// rotate display 180 -#ifdef micro_oled_rotate_180 - send_command(SEGREMAP); - send_command(COMSCANINC); -#endif - - send_command(MEMORYMODE); - send_command(0x02); // 0x02 = 10b, Page addressing mode - - send_command(SETCOMPINS); // 0xDA - if (LCDHEIGHT > 32) { - send_command(0x12); - } else { - send_command(0x02); - } - send_command(SETCONTRAST); // 0x81 - send_command(0x8F); - - send_command(SETPRECHARGE); // 0xd9 - send_command(0xF1); - - send_command(SETVCOMDESELECT); // 0xDB - send_command(0x40); - - send_command(DISPLAYON); //--turn on oled panel - clear_screen(); // Erase hardware memory inside the OLED controller to avoid random data in memory. - send_buffer(); -} - -void send_command(uint8_t command) { - micro_oled_transfer_buffer[0] = I2C_COMMAND; - micro_oled_transfer_buffer[1] = command; - i2c_transmit(I2C_ADDRESS_SA0_1 << 1, micro_oled_transfer_buffer, 2, 100); -} - -void send_data(uint8_t data) { - micro_oled_transfer_buffer[0] = I2C_DATA; - micro_oled_transfer_buffer[1] = data; - i2c_transmit(I2C_ADDRESS_SA0_1 << 1, micro_oled_transfer_buffer, 2, 100); -} - -/** \brief Set SSD1306 page address. - Send page address command and address to the SSD1306 OLED controller. -*/ -void set_page_address(uint8_t address) { - address = (0xB0 | address); - send_command(address); -} - -/** \brief Set SSD1306 column address. - Send column address command and address to the SSD1306 OLED controller. -*/ -void set_column_address(uint8_t address) { - send_command((0x10 | (address >> 4)) + ((128 - LCDWIDTH) >> 8)); - send_command(0x0F & address); -} - -/** \brief Clear SSD1306's memory. - To clear GDRAM inside the LCD controller. -*/ -void clear_screen(void) { - for (int i = 0; i < 8; i++) { - set_page_address(i); - set_column_address(0); - for (int j = 0; j < 0x80; j++) { - send_data(0); - } - } - - memset(micro_oled_screen_current, 0, LCDWIDTH * LCDHEIGHT / 8); -} - -/** \brief Clear SSD1306's memory. - To clear GDRAM inside the LCD controller. -*/ -void clear_buffer(void) { - // 384 - memset(micro_oled_screen_buffer, 0, LCDWIDTH * LCDHEIGHT / 8); -} - -/** \brief Invert display. - The PIXEL_ON color of the display will turn to PIXEL_OFF and the PIXEL_OFF will turn to PIXEL_ON. -*/ -void invert_screen(bool invert) { - if (invert) { - send_command(INVERTDISPLAY); - } else { - send_command(NORMALDISPLAY); - } -} - -/** \brief Set contrast. - OLED contract value from 0 to 255. Note: Contrast level is not very obvious. -*/ -void set_contrast(uint8_t contrast) { - send_command(SETCONTRAST); // 0x81 - send_command(contrast); -} - -/** \brief Transfer display buffer. - Sends the updated buffer to the controller - the current status is checked before to save i2c exectution time -*/ -void send_buffer(void) { - uint8_t i, j; - - uint8_t page_addr = 0xFF; - for (i = 0; i < LCDHEIGHT / 8; i++) { - uint8_t col_addr = 0xFF; - for (j = 0; j < LCDWIDTH; j++) { - if (micro_oled_screen_buffer[i * LCDWIDTH + j] != micro_oled_screen_current[i * LCDWIDTH + j]) { - if (page_addr != i) { - set_page_address(i); - page_addr = i; - } - if (col_addr != j) { - set_column_address(j); - col_addr = j + 1; - } - send_data(micro_oled_screen_buffer[i * LCDWIDTH + j]); - micro_oled_screen_current[i * LCDWIDTH + j] = micro_oled_screen_buffer[i * LCDWIDTH + j]; - } - } - } -} - -/** \brief Draw pixel with color and mode. - Draw color pixel in the screen buffer's x,y position with NORM or XOR draw mode. -*/ -void draw_pixel(uint8_t x, uint8_t y, uint8_t color, uint8_t mode) { - if ((x < 0) || (x >= LCDWIDTH) || (y < 0) || (y >= LCDHEIGHT)) return; - - if (mode == XOR) { - if (color == PIXEL_ON) micro_oled_screen_buffer[x + (y / 8) * LCDWIDTH] ^= _BV((y % 8)); - } else { - if (color == PIXEL_ON) - micro_oled_screen_buffer[x + (y / 8) * LCDWIDTH] |= _BV((y % 8)); - else - micro_oled_screen_buffer[x + (y / 8) * LCDWIDTH] &= ~_BV((y % 8)); - } -} - -/** \brief Draw line with color and mode. -Draw line using color and mode from x0,y0 to x1,y1 of the screen buffer. -*/ -void draw_line(uint8_t x0, uint8_t y0, uint8_t x1, uint8_t y1, uint8_t color, uint8_t mode) { - uint8_t steep = abs(y1 - y0) > abs(x1 - x0); - if (steep) { - swap(x0, y0); - swap(x1, y1); - } - - if (x0 > x1) { - swap(x0, x1); - swap(y0, y1); - } - - uint8_t dx, dy; - dx = x1 - x0; - dy = abs(y1 - y0); - - int8_t err = dx / 2; - int8_t ystep; - - if (y0 < y1) { - ystep = 1; - } else { - ystep = -1; - } - - for (; x0 < x1; x0++) { - if (steep) { - draw_pixel(y0, x0, color, mode); - } else { - draw_pixel(x0, y0, color, mode); - } - err -= dy; - if (err < 0) { - y0 += ystep; - err += dx; - } - } -} - -/** \brief Draw horizontal line with color and mode. -Draw horizontal line using color and mode from x,y to x+width,y of the screen buffer. -*/ -void draw_line_hori(uint8_t x, uint8_t y, uint8_t width, uint8_t color, uint8_t mode) { draw_line(x, y, x + width, y, color, mode); } - -/** \brief Draw vertical line. -Draw vertical line using current fore color and current draw mode from x,y to x,y+height of the screen buffer. -*/ -void draw_line_vert(uint8_t x, uint8_t y, uint8_t height, bool color, uint8_t mode) { draw_line(x, y, x, y + height, color, mode); } - -/** \brief Draw rectangle with color and mode. -Draw rectangle using color and mode from x,y to x+width,y+height of the screen buffer. -*/ -void draw_rect(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode) { - uint8_t tempHeight; - - draw_line_hori(x, y, width, color, mode); - draw_line_hori(x, y + height - 1, width, color, mode); - - tempHeight = height - 2; - - // skip drawing vertical lines to avoid overlapping of pixel that will - // affect XOR plot if no pixel in between horizontal lines - if (tempHeight < 1) return; - - draw_line_vert(x, y + 1, tempHeight, color, mode); - draw_line_vert(x + width - 1, y + 1, tempHeight, color, mode); -} - -/** \brief Draw rectangle with color and mode. -Draw rectangle using color and mode from x,y to x+width,y+height of the screen buffer. -*/ -void draw_rect_soft(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode) { - uint8_t tempHeight; - - draw_line_hori(x + 1, y, width - 2, color, mode); - draw_line_hori(x + 1, y + height - 1, width - 2, color, mode); - - tempHeight = height - 2; - - // skip drawing vertical lines to avoid overlapping of pixel that will - // affect XOR plot if no pixel in between horizontal lines - if (tempHeight < 1) return; - - draw_line_vert(x, y + 1, tempHeight, color, mode); - draw_line_vert(x + width - 1, y + 1, tempHeight, color, mode); -} - -/** \brief Draw filled rectangle with color and mode. -Draw filled rectangle using color and mode from x,y to x+width,y+height of the screen buffer. -*/ -void draw_rect_filled(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode) { - // TODO - need to optimise the memory map draw so that this function will not call pixel one by one - for (int i = x; i < x + width; i++) { - draw_line_vert(i, y, height, color, mode); - } -} - -/** \brief Draw filled rectangle with color and mode. -Draw filled rectangle using color and mode from x,y to x+width,y+height of the screen buffer. -*/ -void draw_rect_filled_soft(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode) { - // TODO - need to optimise the memory map draw so that this function will not call pixel one by one - for (int i = x; i < x + width; i++) { - if (i == x || i == (x + width - 1)) - draw_line_vert(i, y + 1, height - 2, color, mode); - else - draw_line_vert(i, y, height, color, mode); - } -} - -/** \brief Draw character with color and mode. - Draw character c using color and draw mode at x,y. -*/ -void draw_char(uint8_t x, uint8_t y, uint8_t c, uint8_t color, uint8_t mode, uint8_t font) { - // TODO - New routine to take font of any height, at the moment limited to font height in multiple of 8 pixels - - uint8_t rowsToDraw, row, tempC; - uint8_t i, j, temp; - uint16_t charPerBitmapRow, charColPositionOnBitmap, charRowPositionOnBitmap, charBitmapStartPosition; - - if ((font >= TOTALFONTS) || (font < 0)) return; - - uint8_t fontType = font; - uint8_t fontWidth = pgm_read_byte(fonts_pointer[fontType] + 0); - uint8_t fontHeight = pgm_read_byte(fonts_pointer[fontType] + 1); - uint8_t fontStartChar = pgm_read_byte(fonts_pointer[fontType] + 2); - uint8_t fontTotalChar = pgm_read_byte(fonts_pointer[fontType] + 3); - uint16_t fontMapWidth = (pgm_read_byte(fonts_pointer[fontType] + 4) * 100) + pgm_read_byte(fonts_pointer[fontType] + 5); // two bytes values into integer 16 - - if ((c < fontStartChar) || (c > (fontStartChar + fontTotalChar - 1))) // no bitmap for the required c - return; - - tempC = c - fontStartChar; - - // each row (in datasheet is call page) is 8 bits high, 16 bit high character will have 2 rows to be drawn - rowsToDraw = fontHeight / 8; // 8 is LCD's page size, see SSD1306 datasheet - if (rowsToDraw <= 1) rowsToDraw = 1; - - // the following draw function can draw anywhere on the screen, but SLOW pixel by pixel draw - if (rowsToDraw == 1) { - for (i = 0; i < fontWidth + 1; i++) { - if (i == fontWidth) // this is done in a weird way because for 5x7 font, there is no margin, this code add a margin after col 5 - temp = 0; - else - temp = pgm_read_byte(fonts_pointer[fontType] + FONTHEADERSIZE + (tempC * fontWidth) + i); - - for (j = 0; j < 8; j++) { // 8 is the LCD's page height (see datasheet for explanation) - if (temp & 0x1) { - draw_pixel(x + i, y + j, color, mode); - } else { - draw_pixel(x + i, y + j, !color, mode); - } - - temp >>= 1; - } - } - return; - } - - // font height over 8 bit - // take character "0" ASCII 48 as example - charPerBitmapRow = fontMapWidth / fontWidth; // 256/8 =32 char per row - charColPositionOnBitmap = tempC % charPerBitmapRow; // =16 - charRowPositionOnBitmap = (int)(tempC / charPerBitmapRow); // =1 - charBitmapStartPosition = (charRowPositionOnBitmap * fontMapWidth * (fontHeight / 8)) + (charColPositionOnBitmap * fontWidth); - - // each row on LCD is 8 bit height (see datasheet for explanation) - for (row = 0; row < rowsToDraw; row++) { - for (i = 0; i < fontWidth; i++) { - temp = pgm_read_byte(fonts_pointer[fontType] + FONTHEADERSIZE + (charBitmapStartPosition + i + (row * fontMapWidth))); - for (j = 0; j < 8; j++) { // 8 is the LCD's page height (see datasheet for explanation) - if (temp & 0x1) { - draw_pixel(x + i, y + j + (row * 8), color, mode); - } else { - draw_pixel(x + i, y + j + (row * 8), !color, mode); - } - temp >>= 1; - } - } - } -} - -void draw_string(uint8_t x, uint8_t y, char* string, uint8_t color, uint8_t mode, uint8_t font) { - if ((font >= TOTALFONTS) || (font < 0)) return; - - uint8_t fontType = font; - uint8_t fontWidth = pgm_read_byte(fonts_pointer[fontType] + 0); - - uint8_t cur_x = x; - for (int i = 0; i < strlen(string); i++) { - draw_char(cur_x, y, string[i], color, mode, font); - cur_x += fontWidth + 1; - } -} diff --git a/drivers/qwiic/micro_oled.h b/drivers/qwiic/micro_oled.h deleted file mode 100644 index 6f9106f581..0000000000 --- a/drivers/qwiic/micro_oled.h +++ /dev/null @@ -1,134 +0,0 @@ -/* Jim Lindblom @ SparkFun Electronics - * October 26, 2014 - * https://github.com/sparkfun/Micro_OLED_Breakout/tree/master/Firmware/Arduino/libraries/SFE_MicroOLED - * - * Modified by: - * Emil Varughese @ Edwin Robotics Pvt. Ltd. - * July 27, 2015 - * https://github.com/emil01/SparkFun_Micro_OLED_Arduino_Library/ - * - * This code was heavily based around the MicroView library, written by GeekAmmo - * (https://github.com/geekammo/MicroView-Arduino-Library). - * - * Adapted for QMK by: - * Jack Humbert - * October 11, 2018 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 3 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#pragma once - -#include "qwiic.h" - -void micro_oled_init(void); - -void send_command(uint8_t command); -void send_data(uint8_t data); -void set_page_address(uint8_t address); -void set_column_address(uint8_t address); -void clear_screen(void); -void clear_buffer(void); -void send_buffer(void); -void draw_pixel(uint8_t x, uint8_t y, uint8_t color, uint8_t mode); -void draw_line(uint8_t x0, uint8_t y0, uint8_t x1, uint8_t y1, uint8_t color, uint8_t mode); -void draw_line_hori(uint8_t x, uint8_t y, uint8_t width, uint8_t color, uint8_t mode); -void draw_line_vert(uint8_t x, uint8_t y, uint8_t height, bool color, uint8_t mode); -void draw_rect(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode); -void draw_rect_soft(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode); -void draw_rect_filled(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode); -void draw_rect_filled_soft(uint8_t x, uint8_t y, uint8_t width, uint8_t height, uint8_t color, uint8_t mode); -void draw_char(uint8_t x, uint8_t y, uint8_t c, uint8_t color, uint8_t mode, uint8_t font); -void draw_string(uint8_t x, uint8_t y, char* string, uint8_t color, uint8_t mode, uint8_t font); - -#define I2C_ADDRESS_SA0_0 0b0111100 -#ifndef I2C_ADDRESS_SA0_1 -# define I2C_ADDRESS_SA0_1 0b0111101 -#endif -#define I2C_COMMAND 0x00 -#define I2C_DATA 0x40 -#define PIXEL_OFF 0 -#define PIXEL_ON 1 - -#ifndef LCDWIDTH -# define LCDWIDTH 64 -#endif -#ifndef LCDHEIGHT -# define LCDHEIGHT 48 -#endif -#define FONTHEADERSIZE 6 - -#define NORM 0 -#define XOR 1 - -#define PAGE 0 -#define ALL 1 - -#define WIDGETSTYLE0 0 -#define WIDGETSTYLE1 1 -#define WIDGETSTYLE2 2 - -#define SETCONTRAST 0x81 -#define DISPLAYALLONRESUME 0xA4 -#define DISPLAYALLON 0xA5 -#define NORMALDISPLAY 0xA6 -#define INVERTDISPLAY 0xA7 -#define DISPLAYOFF 0xAE -#define DISPLAYON 0xAF -#define SETDISPLAYOFFSET 0xD3 -#define SETCOMPINS 0xDA -#define SETVCOMDESELECT 0xDB -#define SETDISPLAYCLOCKDIV 0xD5 -#define SETPRECHARGE 0xD9 -#define SETMULTIPLEX 0xA8 -#define SETLOWCOLUMN 0x00 -#define SETHIGHCOLUMN 0x10 -#define SETSTARTLINE 0x40 -#define MEMORYMODE 0x20 -#define COMSCANINC 0xC0 -#define COMSCANDEC 0xC8 -#define SEGREMAP 0xA0 -#define CHARGEPUMP 0x8D -#define EXTERNALVCC 0x01 -#define SWITCHCAPVCC 0x02 - -// Scroll -#define ACTIVATESCROLL 0x2F -#define DEACTIVATESCROLL 0x2E -#define SETVERTICALSCROLLAREA 0xA3 -#define RIGHTHORIZONTALSCROLL 0x26 -#define LEFT_HORIZONTALSCROLL 0x27 -#define VERTICALRIGHTHORIZONTALSCROLL 0x29 -#define VERTICALLEFTHORIZONTALSCROLL 0x2A - -typedef enum CMD { - CMD_CLEAR, // 0 - CMD_INVERT, // 1 - CMD_CONTRAST, // 2 - CMD_DISPLAY, // 3 - CMD_SETCURSOR, // 4 - CMD_PIXEL, // 5 - CMD_LINE, // 6 - CMD_LINEH, // 7 - CMD_LINEV, // 8 - CMD_RECT, // 9 - CMD_RECTFILL, // 10 - CMD_CIRCLE, // 11 - CMD_CIRCLEFILL, // 12 - CMD_DRAWCHAR, // 13 - CMD_DRAWBITMAP, // 14 - CMD_GETLCDWIDTH, // 15 - CMD_GETLCDHEIGHT, // 16 - CMD_SETCOLOR, // 17 - CMD_SETDRAWMODE // 18 -} commCommand_t; diff --git a/drivers/qwiic/qwiic.c b/drivers/qwiic/qwiic.c deleted file mode 100644 index 316d6539cb..0000000000 --- a/drivers/qwiic/qwiic.c +++ /dev/null @@ -1,31 +0,0 @@ -/* Copyright 2018 Jack Humbert - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#include "qwiic.h" - -void qwiic_init(void) { -#ifdef QWIIC_JOYSTIIC_ENABLE - joystiic_init(); -#endif -#ifdef QWIIC_MICRO_OLED_ENABLE - micro_oled_init(); -#endif -} - -void qwiic_task(void) { -#ifdef QWIIC_JOYSTIIC_ENABLE - joystiic_task(); -#endif -} diff --git a/drivers/qwiic/qwiic.h b/drivers/qwiic/qwiic.h deleted file mode 100644 index 8c3d1c8d63..0000000000 --- a/drivers/qwiic/qwiic.h +++ /dev/null @@ -1,28 +0,0 @@ -/* Copyright 2018 Jack Humbert - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ -#pragma once - -#include "i2c_master.h" - -#ifdef QWIIC_JOYSTIIC_ENABLE -# include "joystiic.h" -#endif -#ifdef QWIIC_MICRO_OLED_ENABLE -# include "micro_oled.h" -#endif - -void qwiic_init(void); -void qwiic_task(void); diff --git a/drivers/qwiic/qwiic.mk b/drivers/qwiic/qwiic.mk deleted file mode 100644 index 164bd72108..0000000000 --- a/drivers/qwiic/qwiic.mk +++ /dev/null @@ -1,17 +0,0 @@ -ifeq ($(strip $(QWIIC_ENABLE)),yes) - COMMON_VPATH += $(DRIVER_PATH)/qwiic - OPT_DEFS += -DQWIIC_ENABLE - SRC += qwiic.c - QUANTUM_LIB_SRC += i2c_master.c - -ifneq ($(filter JOYSTIIC, $(QWIIC_DRIVERS)),) - OPT_DEFS += -DQWIIC_JOYSTIIC_ENABLE - SRC += joystiic.c -endif - -ifneq ($(filter MICRO_OLED, $(QWIIC_DRIVERS)),) - OPT_DEFS += -DQWIIC_MICRO_OLED_ENABLE - SRC += micro_oled.c -endif - -endif diff --git a/drivers/qwiic/util/font5x7.h b/drivers/qwiic/util/font5x7.h deleted file mode 100644 index a641945aae..0000000000 --- a/drivers/qwiic/util/font5x7.h +++ /dev/null @@ -1,39 +0,0 @@ -/****************************************************************************** -font5x7.h -Definition for small font - -This file was imported from the MicroView library, written by GeekAmmo -(https://github.com/geekammo/MicroView-Arduino-Library), and released under -the terms of the GNU General Public License as published by the Free Software -Foundation, either version 3 of the License, or (at your option) any later -version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . - -Modified by: -Emil Varughese @ Edwin Robotics Pvt. Ltd. -July 27, 2015 -https://github.com/emil01/SparkFun_Micro_OLED_Arduino_Library/ - -******************************************************************************/ -#pragma once - -#include "progmem.h" - -// Standard ASCII 5x7 font -static const unsigned char font5x7[] PROGMEM = { - // first row defines - FONTWIDTH, FONTHEIGHT, ASCII START CHAR, TOTAL CHARACTERS, FONT MAP WIDTH HIGH, FONT MAP WIDTH LOW (2,56 meaning 256) - 5, 8, 0, 255, 12, 75, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00, 0x18, 0x3C, 0x18, 0x00, 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00, 0x18, 0x24, 0x18, 0x00, 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x30, 0x48, 0x3A, 0x06, 0x0E, 0x26, 0x29, 0x79, 0x29, 0x26, 0x40, 0x7F, 0x05, 0x05, 0x07, 0x40, 0x7F, 0x05, 0x25, 0x3F, 0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x14, 0x22, 0x7F, 0x22, 0x14, 0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00, 0x66, 0x89, 0x95, 0x6A, 0x60, 0x60, 0x60, 0x60, 0x60, 0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x08, 0x04, 0x7E, 0x04, 0x08, 0x10, 0x20, 0x7E, 0x20, 0x10, 0x08, 0x08, 0x2A, 0x1C, 0x08, 0x08, 0x1C, 0x2A, 0x08, 0x08, 0x1E, 0x10, 0x10, 0x10, 0x10, 0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x30, 0x38, 0x3E, 0x38, 0x30, - 0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x00, 0x00, 0x00, 0x07, 0x00, 0x07, 0x00, 0x14, 0x7F, 0x14, 0x7F, 0x14, 0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x23, 0x13, 0x08, 0x64, 0x62, 0x36, 0x49, 0x56, 0x20, 0x50, 0x00, 0x08, 0x07, 0x03, 0x00, 0x00, 0x1C, 0x22, 0x41, 0x00, 0x00, 0x41, 0x22, 0x1C, 0x00, 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x08, 0x08, 0x3E, 0x08, 0x08, 0x00, 0x80, 0x70, 0x30, 0x00, 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, 0x00, 0x60, 0x60, 0x00, 0x20, 0x10, 0x08, 0x04, 0x02, 0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00, 0x42, 0x7F, 0x40, 0x00, 0x72, 0x49, 0x49, 0x49, 0x46, 0x21, 0x41, 0x49, 0x4D, 0x33, 0x18, 0x14, 0x12, 0x7F, 0x10, 0x27, 0x45, 0x45, 0x45, 0x39, 0x3C, 0x4A, 0x49, 0x49, 0x31, 0x41, 0x21, 0x11, 0x09, 0x07, 0x36, 0x49, 0x49, 0x49, 0x36, 0x46, 0x49, 0x49, 0x29, 0x1E, 0x00, 0x00, 0x14, 0x00, 0x00, 0x00, 0x40, 0x34, 0x00, 0x00, 0x00, 0x08, 0x14, 0x22, 0x41, 0x14, 0x14, 0x14, 0x14, 0x14, 0x00, 0x41, 0x22, 0x14, 0x08, 0x02, - 0x01, 0x59, 0x09, 0x06, 0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x7C, 0x12, 0x11, 0x12, 0x7C, 0x7F, 0x49, 0x49, 0x49, 0x36, 0x3E, 0x41, 0x41, 0x41, 0x22, 0x7F, 0x41, 0x41, 0x41, 0x3E, 0x7F, 0x49, 0x49, 0x49, 0x41, 0x7F, 0x09, 0x09, 0x09, 0x01, 0x3E, 0x41, 0x41, 0x51, 0x73, 0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00, 0x41, 0x7F, 0x41, 0x00, 0x20, 0x40, 0x41, 0x3F, 0x01, 0x7F, 0x08, 0x14, 0x22, 0x41, 0x7F, 0x40, 0x40, 0x40, 0x40, 0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x7F, 0x04, 0x08, 0x10, 0x7F, 0x3E, 0x41, 0x41, 0x41, 0x3E, 0x7F, 0x09, 0x09, 0x09, 0x06, 0x3E, 0x41, 0x51, 0x21, 0x5E, 0x7F, 0x09, 0x19, 0x29, 0x46, 0x26, 0x49, 0x49, 0x49, 0x32, 0x03, 0x01, 0x7F, 0x01, 0x03, 0x3F, 0x40, 0x40, 0x40, 0x3F, 0x1F, 0x20, 0x40, 0x20, 0x1F, 0x3F, 0x40, 0x38, 0x40, 0x3F, 0x63, 0x14, 0x08, 0x14, 0x63, 0x03, 0x04, 0x78, 0x04, 0x03, 0x61, 0x59, 0x49, 0x4D, 0x43, 0x00, 0x7F, 0x41, 0x41, 0x41, 0x02, 0x04, 0x08, 0x10, 0x20, 0x00, 0x41, 0x41, 0x41, 0x7F, 0x04, 0x02, 0x01, 0x02, 0x04, 0x40, 0x40, - 0x40, 0x40, 0x40, 0x00, 0x03, 0x07, 0x08, 0x00, 0x20, 0x54, 0x54, 0x78, 0x40, 0x7F, 0x28, 0x44, 0x44, 0x38, 0x38, 0x44, 0x44, 0x44, 0x28, 0x38, 0x44, 0x44, 0x28, 0x7F, 0x38, 0x54, 0x54, 0x54, 0x18, 0x00, 0x08, 0x7E, 0x09, 0x02, 0x18, 0xA4, 0xA4, 0x9C, 0x78, 0x7F, 0x08, 0x04, 0x04, 0x78, 0x00, 0x44, 0x7D, 0x40, 0x00, 0x20, 0x40, 0x40, 0x3D, 0x00, 0x7F, 0x10, 0x28, 0x44, 0x00, 0x00, 0x41, 0x7F, 0x40, 0x00, 0x7C, 0x04, 0x78, 0x04, 0x78, 0x7C, 0x08, 0x04, 0x04, 0x78, 0x38, 0x44, 0x44, 0x44, 0x38, 0xFC, 0x18, 0x24, 0x24, 0x18, 0x18, 0x24, 0x24, 0x18, 0xFC, 0x7C, 0x08, 0x04, 0x04, 0x08, 0x48, 0x54, 0x54, 0x54, 0x24, 0x04, 0x04, 0x3F, 0x44, 0x24, 0x3C, 0x40, 0x40, 0x20, 0x7C, 0x1C, 0x20, 0x40, 0x20, 0x1C, 0x3C, 0x40, 0x30, 0x40, 0x3C, 0x44, 0x28, 0x10, 0x28, 0x44, 0x4C, 0x90, 0x90, 0x90, 0x7C, 0x44, 0x64, 0x54, 0x4C, 0x44, 0x00, 0x08, 0x36, 0x41, 0x00, 0x00, 0x00, 0x77, 0x00, 0x00, 0x00, 0x41, 0x36, 0x08, 0x00, 0x02, 0x01, 0x02, 0x04, 0x02, 0x3C, 0x26, 0x23, - 0x26, 0x3C, 0x1E, 0xA1, 0xA1, 0x61, 0x12, 0x3A, 0x40, 0x40, 0x20, 0x7A, 0x38, 0x54, 0x54, 0x55, 0x59, 0x21, 0x55, 0x55, 0x79, 0x41, 0x21, 0x54, 0x54, 0x78, 0x41, 0x21, 0x55, 0x54, 0x78, 0x40, 0x20, 0x54, 0x55, 0x79, 0x40, 0x0C, 0x1E, 0x52, 0x72, 0x12, 0x39, 0x55, 0x55, 0x55, 0x59, 0x39, 0x54, 0x54, 0x54, 0x59, 0x39, 0x55, 0x54, 0x54, 0x58, 0x00, 0x00, 0x45, 0x7C, 0x41, 0x00, 0x02, 0x45, 0x7D, 0x42, 0x00, 0x01, 0x45, 0x7C, 0x40, 0xF0, 0x29, 0x24, 0x29, 0xF0, 0xF0, 0x28, 0x25, 0x28, 0xF0, 0x7C, 0x54, 0x55, 0x45, 0x00, 0x20, 0x54, 0x54, 0x7C, 0x54, 0x7C, 0x0A, 0x09, 0x7F, 0x49, 0x32, 0x49, 0x49, 0x49, 0x32, 0x32, 0x48, 0x48, 0x48, 0x32, 0x32, 0x4A, 0x48, 0x48, 0x30, 0x3A, 0x41, 0x41, 0x21, 0x7A, 0x3A, 0x42, 0x40, 0x20, 0x78, 0x00, 0x9D, 0xA0, 0xA0, 0x7D, 0x39, 0x44, 0x44, 0x44, 0x39, 0x3D, 0x40, 0x40, 0x40, 0x3D, 0x3C, 0x24, 0xFF, 0x24, 0x24, 0x48, 0x7E, 0x49, 0x43, 0x66, 0x2B, 0x2F, 0xFC, 0x2F, 0x2B, 0xFF, 0x09, 0x29, 0xF6, 0x20, 0xC0, 0x88, 0x7E, 0x09, - 0x03, 0x20, 0x54, 0x54, 0x79, 0x41, 0x00, 0x00, 0x44, 0x7D, 0x41, 0x30, 0x48, 0x48, 0x4A, 0x32, 0x38, 0x40, 0x40, 0x22, 0x7A, 0x00, 0x7A, 0x0A, 0x0A, 0x72, 0x7D, 0x0D, 0x19, 0x31, 0x7D, 0x26, 0x29, 0x29, 0x2F, 0x28, 0x26, 0x29, 0x29, 0x29, 0x26, 0x30, 0x48, 0x4D, 0x40, 0x20, 0x38, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x38, 0x2F, 0x10, 0xC8, 0xAC, 0xBA, 0x2F, 0x10, 0x28, 0x34, 0xFA, 0x00, 0x00, 0x7B, 0x00, 0x00, 0x08, 0x14, 0x2A, 0x14, 0x22, 0x22, 0x14, 0x2A, 0x14, 0x08, 0xAA, 0x00, 0x55, 0x00, 0xAA, 0xAA, 0x55, 0xAA, 0x55, 0xAA, 0x00, 0x00, 0x00, 0xFF, 0x00, 0x10, 0x10, 0x10, 0xFF, 0x00, 0x14, 0x14, 0x14, 0xFF, 0x00, 0x10, 0x10, 0xFF, 0x00, 0xFF, 0x10, 0x10, 0xF0, 0x10, 0xF0, 0x14, 0x14, 0x14, 0xFC, 0x00, 0x14, 0x14, 0xF7, 0x00, 0xFF, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0x14, 0x14, 0xF4, 0x04, 0xFC, 0x14, 0x14, 0x17, 0x10, 0x1F, 0x10, 0x10, 0x1F, 0x10, 0x1F, 0x14, 0x14, 0x14, 0x1F, 0x00, 0x10, 0x10, 0x10, 0xF0, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x10, - 0x10, 0x10, 0x10, 0x1F, 0x10, 0x10, 0x10, 0x10, 0xF0, 0x10, 0x00, 0x00, 0x00, 0xFF, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0xFF, 0x10, 0x00, 0x00, 0x00, 0xFF, 0x14, 0x00, 0x00, 0xFF, 0x00, 0xFF, 0x00, 0x00, 0x1F, 0x10, 0x17, 0x00, 0x00, 0xFC, 0x04, 0xF4, 0x14, 0x14, 0x17, 0x10, 0x17, 0x14, 0x14, 0xF4, 0x04, 0xF4, 0x00, 0x00, 0xFF, 0x00, 0xF7, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0x14, 0xF7, 0x00, 0xF7, 0x14, 0x14, 0x14, 0x17, 0x14, 0x10, 0x10, 0x1F, 0x10, 0x1F, 0x14, 0x14, 0x14, 0xF4, 0x14, 0x10, 0x10, 0xF0, 0x10, 0xF0, 0x00, 0x00, 0x1F, 0x10, 0x1F, 0x00, 0x00, 0x00, 0x1F, 0x14, 0x00, 0x00, 0x00, 0xFC, 0x14, 0x00, 0x00, 0xF0, 0x10, 0xF0, 0x10, 0x10, 0xFF, 0x10, 0xFF, 0x14, 0x14, 0x14, 0xFF, 0x14, 0x10, 0x10, 0x10, 0x1F, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x10, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xF0, 0xF0, 0xF0, 0xF0, 0xF0, 0xFF, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 0x38, 0x44, 0x44, 0x38, 0x44, 0x7C, - 0x2A, 0x2A, 0x3E, 0x14, 0x7E, 0x02, 0x02, 0x06, 0x06, 0x02, 0x7E, 0x02, 0x7E, 0x02, 0x63, 0x55, 0x49, 0x41, 0x63, 0x38, 0x44, 0x44, 0x3C, 0x04, 0x40, 0x7E, 0x20, 0x1E, 0x20, 0x06, 0x02, 0x7E, 0x02, 0x02, 0x99, 0xA5, 0xE7, 0xA5, 0x99, 0x1C, 0x2A, 0x49, 0x2A, 0x1C, 0x4C, 0x72, 0x01, 0x72, 0x4C, 0x30, 0x4A, 0x4D, 0x4D, 0x30, 0x30, 0x48, 0x78, 0x48, 0x30, 0xBC, 0x62, 0x5A, 0x46, 0x3D, 0x3E, 0x49, 0x49, 0x49, 0x00, 0x7E, 0x01, 0x01, 0x01, 0x7E, 0x2A, 0x2A, 0x2A, 0x2A, 0x2A, 0x44, 0x44, 0x5F, 0x44, 0x44, 0x40, 0x51, 0x4A, 0x44, 0x40, 0x40, 0x44, 0x4A, 0x51, 0x40, 0x00, 0x00, 0xFF, 0x01, 0x03, 0xE0, 0x80, 0xFF, 0x00, 0x00, 0x08, 0x08, 0x6B, 0x6B, 0x08, 0x36, 0x12, 0x36, 0x24, 0x36, 0x06, 0x0F, 0x09, 0x0F, 0x06, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x00, 0x10, 0x10, 0x00, 0x30, 0x40, 0xFF, 0x01, 0x01, 0x00, 0x1F, 0x01, 0x01, 0x1E, 0x00, 0x19, 0x1D, 0x17, 0x12, 0x00, 0x3C, 0x3C, 0x3C, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x00}; diff --git a/drivers/qwiic/util/font8x16.h b/drivers/qwiic/util/font8x16.h deleted file mode 100644 index 4d3c237866..0000000000 --- a/drivers/qwiic/util/font8x16.h +++ /dev/null @@ -1,39 +0,0 @@ -/****************************************************************************** -font8x16.h -Definition for medium font - -This file was imported from the MicroView library, written by GeekAmmo -(https://github.com/geekammo/MicroView-Arduino-Library), and released under -the terms of the GNU General Public License as published by the Free Software -Foundation, either version 3 of the License, or (at your option) any later -version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . - -Modified by: -Emil Varughese @ Edwin Robotics Pvt. Ltd. -July 27, 2015 -https://github.com/emil01/SparkFun_Micro_OLED_Arduino_Library/ -******************************************************************************/ -#pragma once - -#include "progmem.h" - -static const unsigned char font8x16[] PROGMEM = { - // first row defines - FONTWIDTH, FONTHEIGHT, ASCII START CHAR, TOTAL CHARACTERS, FONT MAP WIDTH HIGH, FONT MAP WIDTH LOW (2,56 meaning 256) - 8, 16, 32, 96, 2, 56, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x00, 0x0E, 0x00, 0x00, 0x00, 0x00, 0xD0, 0xBE, 0x90, 0xD0, 0xBE, 0x90, 0x00, 0x00, 0x1C, 0x62, 0xFF, 0xC2, 0x80, 0x00, 0x00, 0x0C, 0x12, 0x92, 0x4C, 0xB0, 0x88, 0x06, 0x00, 0x80, 0x7C, 0x62, 0xB2, 0x1C, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x0E, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x18, 0x04, 0x02, 0x02, 0x00, 0x00, 0x00, 0x02, 0x02, 0x04, 0x18, 0xE0, 0x00, 0x00, 0x00, 0x24, 0x18, 0x7E, 0x18, 0x24, 0x00, 0x00, 0x80, 0x80, 0x80, 0xF0, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x60, 0x18, 0x06, 0x00, 0x00, 0xF8, 0x04, 0xC2, 0x32, 0x0C, 0xF8, 0x00, 0x00, 0x00, 0x04, 0x04, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x82, 0x42, 0x22, - 0x1C, 0x00, 0x00, 0x00, 0x02, 0x22, 0x22, 0x22, 0xDC, 0x00, 0x00, 0xC0, 0xA0, 0x98, 0x84, 0xFE, 0x80, 0x80, 0x00, 0x00, 0x1E, 0x12, 0x12, 0x22, 0xC2, 0x00, 0x00, 0xF8, 0x44, 0x22, 0x22, 0x22, 0xC0, 0x00, 0x00, 0x00, 0x02, 0x02, 0xC2, 0x32, 0x0A, 0x06, 0x00, 0x00, 0x8C, 0x52, 0x22, 0x52, 0x8C, 0x00, 0x00, 0x3C, 0x42, 0x42, 0x42, 0x26, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x30, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x30, 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, 0x40, 0x40, 0x20, 0x20, 0x10, 0x00, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x00, 0x00, 0x10, 0x20, 0x20, 0x40, 0x40, 0x80, 0x80, 0x00, 0x00, 0x02, 0x82, 0x42, 0x22, 0x1C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x04, 0x04, 0x0F, 0x04, 0x03, 0x00, 0x00, 0x04, 0x02, 0x01, 0x03, 0x04, 0x04, 0x03, 0x00, - 0x03, 0x04, 0x04, 0x04, 0x05, 0x03, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x06, 0x08, 0x10, 0x10, 0x00, 0x00, 0x00, 0x10, 0x10, 0x08, 0x06, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x16, 0x0E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x04, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x03, 0x04, 0x04, 0x02, 0x01, 0x00, 0x00, 0x00, 0x04, 0x04, 0x07, 0x04, 0x04, 0x00, 0x00, 0x00, 0x07, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x01, 0x02, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x04, 0x04, - 0x04, 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, 0x06, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x16, 0x0E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x02, 0x02, 0x04, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x04, 0x02, 0x02, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x04, 0x72, 0x8A, 0xFA, 0x84, 0x78, 0x00, 0x00, 0xC0, 0x38, 0x06, 0x38, 0xC0, 0x00, 0x00, 0x00, 0xFE, 0x22, 0x22, 0x22, 0xDC, 0x00, 0x00, 0xF8, 0x04, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00, 0xFE, 0x02, 0x02, 0x02, 0x04, 0xF8, 0x00, 0x00, 0x00, 0xFE, 0x22, 0x22, 0x22, 0x22, 0x00, 0x00, 0x00, 0xFE, 0x22, 0x22, 0x22, 0x22, 0x00, 0x00, 0xF8, 0x04, 0x02, 0x02, 0x22, 0xE2, 0x00, 0x00, 0xFE, 0x20, 0x20, 0x20, 0x20, 0xFE, 0x00, 0x00, 0x00, 0x02, 0x02, 0xFE, 0x02, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x02, 0xFE, 0x00, 0x00, 0xFE, 0x40, 0xB0, 0x08, 0x04, 0x02, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xFE, 0x0C, 0x70, 0x80, 0x70, 0x0C, 0xFE, 0x00, 0xFE, 0x0C, 0x30, 0xC0, 0x00, 0xFE, 0x00, 0x00, 0xF8, 0x04, 0x02, 0x02, 0x04, 0xF8, 0x00, 0x00, 0xFE, 0x42, 0x42, 0x42, 0x22, 0x1C, 0x00, 0x00, 0xF8, 0x04, 0x02, 0x02, 0x04, 0xF8, 0x00, 0x00, 0x00, 0xFE, 0x42, 0x42, 0xA2, 0x1C, 0x00, 0x00, 0x00, 0x1C, 0x22, 0x42, 0x42, 0x80, 0x00, 0x00, 0x02, 0x02, 0x02, 0xFE, 0x02, 0x02, 0x02, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x00, 0x06, 0x38, 0xC0, 0x00, 0xC0, 0x38, 0x06, 0x00, 0x3E, 0xC0, 0xF0, 0x0E, 0xF0, 0xC0, 0x3E, 0x00, 0x00, 0x06, 0x98, 0x60, 0x98, 0x06, 0x00, 0x00, 0x00, 0x06, 0x18, 0xE0, 0x18, 0x06, 0x00, 0x00, 0x02, 0x02, 0xC2, 0x32, 0x0A, 0x06, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00, 0x06, 0x18, 0x60, 0x80, 0x00, 0x00, 0x00, 0x02, 0x02, 0x02, 0x02, 0xFE, 0x00, 0x00, 0x00, 0x40, 0x30, 0x0C, 0x0C, 0x30, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, - 0x02, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x06, 0x01, 0x01, 0x01, 0x01, 0x01, 0x06, 0x00, 0x00, 0x07, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x01, 0x02, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x07, 0x04, 0x04, 0x04, 0x02, 0x01, 0x00, 0x00, 0x00, 0x07, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x04, 0x04, 0x04, 0x07, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x04, 0x04, 0x07, 0x04, 0x04, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x07, 0x00, 0x00, 0x01, 0x02, 0x04, 0x00, 0x00, 0x00, 0x07, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x07, 0x00, 0x00, 0x01, 0x00, 0x00, 0x07, 0x00, 0x07, 0x00, 0x00, 0x00, 0x03, 0x07, 0x00, 0x00, 0x01, 0x02, 0x04, 0x04, 0x02, 0x01, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x04, 0x0C, 0x12, 0x11, 0x10, 0x00, 0x00, 0x07, 0x00, 0x00, 0x01, 0x06, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, - 0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x01, 0x06, 0x01, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x06, 0x01, 0x00, 0x01, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x06, 0x05, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x10, 0x10, 0x10, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x04, 0x00, 0x10, 0x10, 0x10, 0x10, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, 0x00, 0x00, 0x00, 0x02, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0xF0, 0x00, 0x00, 0x00, 0xFE, 0x20, 0x10, 0x10, 0xE0, 0x00, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0x10, 0x00, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0xFE, 0x00, 0x00, 0x00, 0xE0, 0x90, 0x90, 0x90, 0xE0, 0x00, 0x00, 0x00, 0x20, 0xFC, 0x22, 0x22, 0x22, 0x02, - 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0xF0, 0x00, 0x00, 0x00, 0xFE, 0x20, 0x10, 0x10, 0xE0, 0x00, 0x00, 0x10, 0x10, 0xF2, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x10, 0x10, 0xF2, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x80, 0x40, 0x20, 0x10, 0x00, 0x00, 0x00, 0x02, 0x02, 0xFE, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x20, 0x10, 0xF0, 0x20, 0x10, 0xF0, 0x00, 0x00, 0xF0, 0x20, 0x10, 0x10, 0xE0, 0x00, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0xE0, 0x00, 0x00, 0x00, 0xF0, 0x20, 0x10, 0x10, 0xE0, 0x00, 0x00, 0x00, 0xE0, 0x10, 0x10, 0x10, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0x20, 0x10, 0x10, 0x70, 0x00, 0x00, 0x00, 0x60, 0x90, 0x90, 0x90, 0x20, 0x00, 0x00, 0x00, 0x20, 0x20, 0xFC, 0x20, 0x20, 0x20, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x70, 0x80, 0x00, 0x80, 0x70, 0x00, 0x00, 0xF0, 0x00, 0xC0, 0x30, 0xC0, 0x00, 0xF0, 0x00, 0x00, 0x30, 0xC0, 0xC0, 0x30, 0x00, 0x00, 0x00, 0x00, 0x30, 0xC0, 0x00, 0x80, 0x70, 0x00, 0x00, 0x00, 0x10, - 0x10, 0x90, 0x50, 0x30, 0x00, 0x00, 0x00, 0x80, 0x80, 0x7E, 0x02, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x02, 0x7E, 0x80, 0x80, 0x00, 0x00, 0x00, 0x80, 0x80, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x02, 0x07, 0x00, 0x00, 0x00, 0x07, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x02, 0x07, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x33, 0x24, 0x24, 0x22, 0x1F, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x07, 0x04, 0x04, 0x00, 0x00, 0x00, 0x20, 0x20, 0x20, 0x20, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x01, 0x02, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x04, 0x04, 0x00, 0x00, 0x07, 0x00, 0x00, 0x07, 0x00, - 0x00, 0x07, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x3F, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x02, 0x3F, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x04, 0x04, 0x04, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x04, 0x04, 0x04, 0x00, 0x00, 0x03, 0x04, 0x04, 0x02, 0x07, 0x00, 0x00, 0x00, 0x00, 0x03, 0x04, 0x03, 0x00, 0x00, 0x00, 0x01, 0x06, 0x01, 0x00, 0x01, 0x06, 0x01, 0x00, 0x00, 0x06, 0x01, 0x01, 0x06, 0x00, 0x00, 0x00, 0x20, 0x20, 0x31, 0x0E, 0x03, 0x00, 0x00, 0x00, 0x00, 0x06, 0x05, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x10, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x10, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}; diff --git a/lib/python/qmk/info.py b/lib/python/qmk/info.py index 1b4c42ff41..edbf5d7c82 100644 --- a/lib/python/qmk/info.py +++ b/lib/python/qmk/info.py @@ -113,7 +113,7 @@ def _extract_features(info_data, rules): rules['BOOTMAGIC_ENABLE'] = 'on' # Skip non-boolean features we haven't implemented special handling for - for feature in 'HAPTIC_ENABLE', 'QWIIC_ENABLE': + for feature in ('HAPTIC_ENABLE',): if rules.get(feature): del rules[feature] diff --git a/quantum/keyboard.c b/quantum/keyboard.c index 401abdd8fa..f2a0889c12 100644 --- a/quantum/keyboard.c +++ b/quantum/keyboard.c @@ -73,9 +73,6 @@ along with this program. If not, see . #ifdef HD44780_ENABLE # include "hd44780.h" #endif -#ifdef QWIIC_ENABLE -# include "qwiic.h" -#endif #ifdef OLED_ENABLE # include "oled_driver.h" #endif @@ -304,9 +301,6 @@ void keyboard_init(void) { #if defined(CRC_ENABLE) crc_init(); #endif -#ifdef QWIIC_ENABLE - qwiic_init(); -#endif #ifdef OLED_ENABLE oled_init(OLED_ROTATION_0); #endif @@ -457,10 +451,6 @@ MATRIX_LOOP_END: if (encoders_changed) last_encoder_activity_trigger(); #endif -#ifdef QWIIC_ENABLE - qwiic_task(); -#endif - #ifdef OLED_ENABLE oled_task(); # if OLED_TIMEOUT > 0 From 82bf688e4499b0646979a47f98c0c0dd59bd70c2 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Sat, 9 Oct 2021 11:31:13 -0700 Subject: [PATCH 225/595] [Keyboard] Update Tractyl Manuform config for F411 (#14770) --- .../tractyl_manuform/5x6_right/f411/config.h | 26 +-- .../tractyl_manuform/5x6_right/f411/f411.c | 2 + .../tractyl_manuform/5x6_right/f411/mcuconf.h | 24 ++- .../tractyl_manuform/5x6_right/f411/readme.md | 5 +- .../5x6_right/keymaps/drashna/keymap.c | 6 +- .../handwired/tractyl_manuform/readme.md | 164 ++---------------- 6 files changed, 58 insertions(+), 169 deletions(-) diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h index 7fb97cd2a4..b2a240f9ff 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h @@ -31,22 +31,23 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW -#define USB_VBUS_PIN B10 +// #define USB_VBUS_PIN B10 // doesn't seem to work for me on one of my controllers... */ #define SPLIT_HAND_PIN C14 // high = left, low = right // WS2812 RGB LED strip input and number of LEDs #define RGB_DI_PIN A1 -#define WS2812_PWM_DRIVER PWMD5 // default: PWMD2 +#define WS2812_PWM_DRIVER PWMD2 // default: PWMD2 #define WS2812_PWM_CHANNEL 2 // default: 2 -#define WS2812_PWM_PAL_MODE 2 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2 +#define WS2812_PWM_PAL_MODE 1 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2 //#define WS2812_PWM_COMPLEMENTARY_OUTPUT // Define for a complementary timer output (TIMx_CHyN); omit for a normal timer output (TIMx_CHy). -#define WS2812_DMA_STREAM STM32_DMA1_STREAM0 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. -#define WS2812_DMA_CHANNEL 6 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. +#define WS2812_DMA_STREAM STM32_DMA1_STREAM7 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. +#define WS2812_DMA_CHANNEL 3 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. #define RGBLED_NUM 20 #define RGBLIGHT_SPLIT #define RGBLED_SPLIT \ { 10, 10 } +#define RGBLIGHT_LIMIT_VAL 80 #define DEBUG_LED_PIN C13 @@ -68,13 +69,14 @@ along with this program. If not, see . /* i2c config for oleds */ #define I2C_DRIVER I2CD1 -#define I2C1_SCL_BANK GPIOB -#define I2C1_SDA_BANK GPIOB -#define I2C1_SCL 8 -#define I2C1_SDA 9 +#define I2C1_SCL_PIN B8 +#define I2C1_SDA_PIN B9 #define I2C1_SCL_PAL_MODE 4 #define I2C1_SDA_PAL_MODE 4 -#define I2C1_CLOCK_SPEED 400000 +// #define I2C1_CLOCK_SPEED 400000 +/* For Legacy Compatibility: */ +#define I2C1_SCL 8 +#define I2C1_SDA 9 /* encoder config */ #define ENCODERS_PAD_A \ @@ -93,7 +95,7 @@ along with this program. If not, see . /* eeprom config */ #define EXTERNAL_EEPROM_SPI_SLAVE_SELECT_PIN A4 -#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 8 +#define EXTERNAL_EEPROM_SPI_CLOCK_DIVISOR 64 // #define EXTERNAL_EEPROM_BYTE_COUNT 8196 // #define EXTERNAL_EEPROM_PAGE_SIZE 32 // #define EXTERNAL_EEPROM_ADDRESS_SIZE 2 @@ -102,4 +104,4 @@ along with this program. If not, see . /* pmw3360 config */ #define PMW3360_CS_PIN B0 #define PMW3360_SPI_MODE 3 -#define PMW3360_SPI_DIVISOR 4 +#define PMW3360_SPI_DIVISOR 64 diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/f411.c b/keyboards/handwired/tractyl_manuform/5x6_right/f411/f411.c index 394c597b84..700b0685f2 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/f411.c +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/f411.c @@ -24,8 +24,10 @@ void matrix_scan_sub_kb(void) { } } +#ifdef USB_VBUS_PIN bool usb_vbus_state(void) { setPinInputLow(USB_VBUS_PIN); wait_us(5); return readPin(USB_VBUS_PIN); } +#endif diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/mcuconf.h b/keyboards/handwired/tractyl_manuform/5x6_right/f411/mcuconf.h index 053f0aa517..d868eae48e 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/mcuconf.h +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/mcuconf.h @@ -21,17 +21,35 @@ #undef STM32_I2C_USE_I2C1 #define STM32_I2C_USE_I2C1 TRUE -#undef STM32_PWM_USE_TIM5 -#define STM32_PWM_USE_TIM5 TRUE +#undef STM32_I2C_I2C1_RX_DMA_STREAM +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#undef STM32_I2C_I2C1_TX_DMA_STREAM +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 1) + +#undef STM32_PWM_USE_TIM2 +#define STM32_PWM_USE_TIM2 TRUE #undef STM32_PWM_USE_TIM3 #define STM32_PWM_USE_TIM3 TRUE #undef STM32_SPI_USE_SPI1 -#define STM32_SPI_USE_SPI1 TRUE +#define STM32_SPI_USE_SPI1 TRUE + +#undef STM32_SPI_SPI1_RX_DMA_STREAM +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) +#undef STM32_SPI_SPI1_TX_DMA_STREAM +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) #undef STM32_SERIAL_USE_USART2 #define STM32_SERIAL_USE_USART2 TRUE +#undef STM32_UART_USART2_RX_DMA_STREAM +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#undef STM32_UART_USART2_TX_DMA_STREAM +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) + #undef STM32_GPT_USE_TIM4 #define STM32_GPT_USE_TIM4 TRUE + +#undef STM32_ST_USE_TIMER +#define STM32_ST_USE_TIMER 5 diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md b/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md index 4571e18045..6377613814 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md @@ -4,11 +4,12 @@ * Split Hand Pin, using PC14 * Full Duplex Serial/USART using PA3 and PA4 on USART2 * PWM Audio using PB1 and TIM3 and GPT on TIM4 -* PWM RGB using PA1 TIM5 +* PWM RGB using PA1 TIM2 * pmw3360 sensor sharing PA5-PA7 on SPI1, with B0 as CS pin * 8KB SPI EEPROM chip sharing PA5-PA7 on SPI1 with PA4 as CS pin -* Encoder using PA10 and PA12 +* Encoder using PA13 and PA14 * SSD1306 OLED display (128x64) using PB8-PB9 on I2C1 +* Pull-up resistor (22k) on A10 to fix reset issue. * Keyboard Maintainer: [Drashna Jael're](https://github.com/drashna) * Hardware Supported: [Design files](https://gitlab.com/keyboards1/dm_r_track/-/tree/master/boolean), [WeAct BlackPill (F411)](https://github.com/WeActTC/MiniSTM32F4x1), [PMW3360 Optical Sensor](https://www.tindie.com/products/jkicklighter/pmw3360-motion-sensor/) diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c b/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c index 67842c26d0..f209206337 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c +++ b/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c @@ -117,8 +117,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_ADJUST] = LAYOUT_5x6_right_wrapper( KC_MAKE, ___________________BLANK___________________, _________________ADJUST_R1_________________, KC_RST, VRSN, _________________ADJUST_L1_________________, _________________ADJUST_R1_________________, EEP_RST, - UC_MOD, _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, TG_MODS, - _______, _________________ADJUST_L3_________________, _________________ADJUST_R3_________________, KC_MPLY, + _______, _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, TG_MODS, + UC_MOD, _________________ADJUST_L3_________________, _________________ADJUST_R3_________________, KC_MPLY, HPT_DWLI, HPT_DWLD, TG_GAME, TG_DBLO, HPT_TOG, HPT_BUZ, KC_NUKE, _______, _______, _______, @@ -350,7 +350,7 @@ void render_kitty(void) { // assumes 1 frame prep stage extern bool swap_hands; void animation_phase(void) { - if (swap_hands) { + if (tap_toggling) { anim_frame_duration = 300; current_rtogi_frame = (current_rtogi_frame + 1) % RTOGI_FRAMES; oled_write_raw_P(rtogi[abs((RTOGI_FRAMES - 1) - current_rtogi_frame)], ANIM_SIZE); diff --git a/keyboards/handwired/tractyl_manuform/readme.md b/keyboards/handwired/tractyl_manuform/readme.md index 3221da0e9d..e78fd2ee06 100644 --- a/keyboards/handwired/tractyl_manuform/readme.md +++ b/keyboards/handwired/tractyl_manuform/readme.md @@ -1,159 +1,25 @@ -Dactyl Manuform (4x5, 5x6, 5x7, 6x6) -====== -the [Dactyl-Manuform](https://github.com/tshort/dactyl-keyboard) is a split curved keyboard based on the design of [adereth dactyl](https://github.com/adereth/dactyl-keyboard) and thumb cluster design of the [manuform](https://geekhack.org/index.php?topic=46015.0) keyboard, the hardware is similar to the let's split keyboard. all information needed for making one is in the first link. -![Imgur](https://i.imgur.com/7y0Vbyd.jpg) - - -## First Time Setup - -Download or clone the `qmk_firmware` repo and navigate to its top level directory. Once your build environment is setup, you'll be able to generate the default .hex using: - -Depending on your Layout chose one of the follwing commands: - -``` -$ make handwired/dactyl_manuform/YOUR_LAYOUT:YOUR_KEYMAP_NAME -``` - -example: -``` -$ make handwired/dactyl_manuform/4x5:default -``` - -If everything worked correctly you will see a file: - -``` -dactyl_manuform_YOUR_LAYOUT_YOUR_KEYMAP_NAME.hex -``` - -For more information on customizing keymaps, take a look at the primary documentation for [Customizing Your Keymap](/docs/faq_keymap.md) in the main readme.md. - - -## Keymaps - -### [Keymaps 4x5](/keyboards/handwired/dactyl_manuform/4x5/keymaps/) - -#### Default -Simple QWERTY layout with 3 Layers. -#### Dvorak - -### [Keymaps 5x6](/keyboards/handwired/dactyl_manuform/5x6/keymaps/) - -#### Default -Just a copy of the Impstyle keymap. Feel free to adjust it. - -#### Impstyle -A simple QWERTY keymap with 3 Layers. Both sides are connected via serial and the Left ist the master. - -### [Keymaps 5x7 aka almost Ergodox](/keyboards/handwired/dactyl_manuform/5x7/keymaps/) -#### Default -Keymap of Loligagger from geekhack. - -### [Keymaps 6x6](/keyboards/handwired/dactyl_manuform/6x6/keymaps/) - -#### Default -Simple QWERTY layout with 3 Layers. - -## Required Hardware - -Apart from diodes and key switches for the keyboard matrix in each half, you -will need: - -* 2 Arduino Pro Micros. You can find these on AliExpress for ≈3.50USD each. -* 2 TRRS sockets and 1 TRRS cable, or 2 TRS sockets and 1 TRS cable - -Alternatively, you can use any sort of cable and socket that has at least 3 -wires. If you want to use I2C to communicate between halves, you will need a -cable with at least 4 wires and 2x 4.7kΩ pull-up resistors - -## Optional Hardware -A speaker can be hooked-up to either side to the `5` (`C6`) pin and `GND`, and turned on via `AUDIO_ENABLE`. +# Tractyl Manuform (4x6, 5x6) -## Wiring - -The 3 wires of the TRS/TRRS cable need to connect GND, VCC, and digital pin 3 (i.e. -PD0 on the ATmega32u4) between the two Pro Micros. - -Next, wire your key matrix to any of the remaining 17 IO pins of the pro micro -and modify the `matrix.c` accordingly. - -The wiring for serial: - -![serial wiring](https://i.imgur.com/C3D1GAQ.png) - -The wiring for i2c: - -![i2c wiring](https://i.imgur.com/Hbzhc6E.png) - -The pull-up resistors may be placed on either half. It is also possible -to use 4 resistors and have the pull-ups in both halves, but this is -unnecessary in simple use cases. - -You can change your configuration between serial and i2c by modifying your `config.h` file. - -## Notes on Software Configuration - -the keymaps in here are for the 4x5 layout of the keyboard only. - -## Flashing - -To flash your firmware take a look at: [Flashing Instructions and Bootloader Information](https://docs.qmk.fm/#/flashing) - - -## Choosing which board to plug the USB cable into (choosing Master) - -Because the two boards are identical, the firmware has logic to differentiate the left and right board. - -It uses two strategies to figure things out: looking at the EEPROM (memory on the chip) or looking if the current board has the usb cable. - -The EEPROM approach requires additional setup (flashing the eeprom) but allows you to swap the usb cable to either side. - -The USB cable approach is easier to setup and if you just want the usb cable on the left board, you do not need to do anything extra. - -### Setting the left hand as master - -If you always plug the usb cable into the left board, nothing extra is needed as this is the default. Comment out `EE_HANDS` and comment out `I2C_MASTER_RIGHT` or `MASTER_RIGHT` if for some reason it was set. - -### Setting the right hand as master - -If you always plug the usb cable into the right board, add an extra flag to your `config.h` -``` - #define MASTER_RIGHT -``` - -### Setting EE_hands to use either hands as master +the [Dactyl-Manuform](https://github.com/tshort/dactyl-keyboard) is a split curved keyboard based on the design of [adereth dactyl](https://github.com/adereth/dactyl-keyboard) and thumb cluster design of the [manuform](https://geekhack.org/index.php?topic=46015.0) keyboard, the hardware is similar to the let's split keyboard. all information needed for making one is in the first link. +![Imgur](https://i.imgur.com/kDNVTI4l.jpeg) -If you define `EE_HANDS` in your `config.h`, you will need to set the -EEPROM for the left and right halves. +* Keyboard Maintainer: [drashna](https://github.com/drashna) +* Hardware Supported: Teensy 2.0++, WeAct BlackPill F411 -The EEPROM is used to store whether the -half is left handed or right handed. This makes it so that the same firmware -file will run on both hands instead of having to flash left and right handed -versions of the firmware to each half. To flash the EEPROM file for the left -half run: -``` -make handwired/dactyl_promicro:default:dfu-split-left -make handwired/dactyl_promicro:default:dfu-split-right -``` +Make example for this keyboard (after setting up your build environment): -After you have flashed the EEPROM, you then need to set `EE_HANDS` in your config.h, rebuild the hex files and reflash. + make handwired/tractyl_manuform/5x6_right/f411/drashna:default -Note that you need to program both halves, but you have the option of using -different keymaps for each half. You could program the left half with a QWERTY -layout and the right half with a Colemak layout using bootmagic's default layout option. -Then if you connect the left half to a computer by USB the keyboard will use QWERTY and Colemak when the -right half is connected. +Flashing example for this keyboard: + make handwired/tractyl_manuform/5x6_right/f411/drashna:default:flash -Notes on Using Pro Micro 3.3V ------------------------------ +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). -Do update the `F_CPU` parameter in `rules.mk` to `8000000` which reflects -the frequency on the 3.3V board. +## Bootloader -Also, if the slave board is producing weird characters in certain columns, -update the following line in `matrix.c` to the following: +Enter the bootloader in 3 ways: -``` -// wait_us(30); // without this wait read unstable value. -wait_us(300); // without this wait read unstable value. -``` +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available From 969596bd679dfee93534c3535df216d137b67895 Mon Sep 17 00:00:00 2001 From: shela Date: Sun, 10 Oct 2021 05:02:55 +0900 Subject: [PATCH 226/595] Update Japanese document (#14769) --- docs/ja/contributing.md | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/docs/ja/contributing.md b/docs/ja/contributing.md index 14ef598ea9..56cc4d312d 100644 --- a/docs/ja/contributing.md +++ b/docs/ja/contributing.md @@ -1,8 +1,8 @@ # 貢献方法 👍🎉 まず、これを読み貢献する時間を作ってくれてありがとうございます！🎉👍 @@ -79,7 +79,7 @@ QMK には幾つかの異なるタイプの変更があり、それぞれ異な ``` kerpleplork の fronzlebop を調整します -kerpleplork はエラーコード 23 で連続的に失敗していました。根本的な原因は fronzlebop 設定で、これにより kerpleplork はN回の繰り返しごとにアクティブになります。 +kerpleplork はエラーコード 23 で連続的に失敗していました。根本的な原因は fronzlebop 設定で、これにより kerpleplork は N 回の繰り返しごとにアクティブになります。 私が使用できるデバイスの限られた実験では、kerpleplork の混乱を避けるために 7 は十分高い値であることを示していますが、念のため ARM デバイスを持つ人たちからフィードバックを得たいです。 ``` @@ -122,7 +122,7 @@ enum my_keycodes { ほとんどの初めての QMK 貢献者は、個人のキーマップから始めます。キーマップの標準はかなりカジュアルなものにしようとしています(キーマップは結局のところ作成者の性格を反映しています)が、他の人があなたのキーマップを簡単に見つけて学ぶことができるように、これらのガイドラインに従うようにお願いします。 -* [テンプレート](documentation_templates.md) を使って `readme.md` を書きます。 +* [テンプレート](ja/documentation_templates.md) を使って `readme.md` を書きます。 * 全てのキーマップの PR は squash されるため、コミットがどのように squash されるかを気にする場合は、自分で行う必要があります。 * キーマップの PR に機能をまとめないでください。最初に機能をサブミットし、次にキーマップのための2つ目の PR をサブミットします。 * `Makefile` をキーマップフォルダに含めないでください(もう使われていません)。 From 5aca3f613cb187052428a50d880950df9b2b80e0 Mon Sep 17 00:00:00 2001 From: shela Date: Sun, 10 Oct 2021 05:03:17 +0900 Subject: [PATCH 227/595] Update Japanese document (#14767) --- docs/ja/syllabus.md | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/docs/ja/syllabus.md b/docs/ja/syllabus.md index 14e743ee9c..9209cb49e0 100644 --- a/docs/ja/syllabus.md +++ b/docs/ja/syllabus.md @@ -1,8 +1,8 @@ # QMK シラバス このページは最初に基本を紹介し、そして、QMK に習熟するために必要な全ての概念を理解するように導くことで、QMK の知識を構築するのに役立ちます。 @@ -45,6 +45,7 @@ * [タップダンス](ja/feature_tap_dance.md) * [コンボ](ja/feature_combo.md) * [ユーザスペース](ja/feature_userspace.md) + * [キーオーバーライド](ja/feature_key_overrides.md) # 上級トピック @@ -58,7 +59,7 @@ * **高度な機能** * [ユニコード](ja/feature_unicode.md) * [API](ja/api_overview.md) - * [ブートマジック](ja/feature_bootmagic.md) + * [ブートマジックライト](ja/feature_bootmagic.md) * **ハードウェア** * [キーボードがどのように動作するか](ja/how_keyboards_work.md) * [キーボードマトリックスの仕組み](ja/how_a_matrix_works.md) From f216c20fc74fc1b8ef2e6d952b17b1ee1914e236 Mon Sep 17 00:00:00 2001 From: shela Date: Sun, 10 Oct 2021 05:04:00 +0900 Subject: [PATCH 228/595] Update Japanese document (#14766) --- docs/ja/understanding_qmk.md | 65 ++++++++++++++++++------------------ 1 file changed, 33 insertions(+), 32 deletions(-) diff --git a/docs/ja/understanding_qmk.md b/docs/ja/understanding_qmk.md index 5fcb7be856..109876961b 100644 --- a/docs/ja/understanding_qmk.md +++ b/docs/ja/understanding_qmk.md @@ -1,15 +1,15 @@ # QMK のコードの理解 このドキュメントでは、QMK ファームウェアがどのように機能するかを非常に高いレベルから説明しようとしています。基本的なプログラミングの概念を理解していることを前提としていますが、(実例を示す必要がある場合を除き) C に精通していることを前提にはしていません。以下のドキュメントの基本的な知識があることを前提としています。 * [入門](ja/getting_started_introduction.md) * [キーボードがどのように動作するか](ja/how_keyboards_work.md) -* [FAQ](ja/faq.md) +* [FAQ](ja/faq_general.md) ## スタートアップ @@ -138,41 +138,42 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { `process_record()` 関数自体は一見簡単に見えますが、その内部は QMK の様々なレベルで機能を上書きするためのゲートウェイが隠されています。キーボード/キーマップレベルの機能について調べる必要があるときは、以下に列挙した一連のイベントを手引帳として使います。`rules.mk` またはほかの場所で設定されたオプションに応じて、最終的なファームウェアに以下の関数のサブセットのみが含まれます。 * [`void process_record(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/tmk_core/common/action.c#L172) - * [`bool process_record_quantum(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/quantum.c#L206) - * [このレコードをキーコードにマップする](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/quantum.c#L226) - * [`void velocikey_accelerate(void)`](https://github.com/qmk/qmk_firmware/blob/c1c5922aae7b60b7c7d13d3769350eed9dda17ab/quantum/velocikey.c#L27) - * [`void preprocess_tap_dance(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_tap_dance.c#L119) - * [`bool process_key_lock(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_key_lock.c#L62) - * [`bool process_clicky(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_clicky.c#L79) - * [`bool process_haptic(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/2cee371bf125a6ec541dd7c5a809573facc7c456/drivers/haptic/haptic.c#L216) - * [`bool process_record_kb(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/keyboards/clueboard/card/card.c#L20) - * [`bool process_record_user(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/keyboards/clueboard/card/keymaps/default/keymap.c#L58) - * [`bool process_midi(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_midi.c#L81) - * [`bool process_audio(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_audio.c#L19) - * [`bool process_steno(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_steno.c#L160) - * [`bool process_music(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_music.c#L114) - * [`bool process_tap_dance(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_tap_dance.c#L141) - * [`bool process_unicode_common(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_unicode_common.c#L169) は、以下のいずれかを呼び出します: - * [`bool process_unicode(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_unicode.c#L20) - * [`bool process_unicodemap(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_unicodemap.c#L46) - * [`bool process_ucis(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_ucis.c#L95) - * [`bool process_leader(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_leader.c#L51) - * [`bool process_combo(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_combo.c#L115) - * [`bool process_printer(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_printer.c#L77) - * [`bool process_auto_shift(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_auto_shift.c#L94) - * [`bool process_terminal(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_terminal.c#L264) - * [Quantum 固有のキーコードを識別して処理する](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/quantum.c#L291) + * [`bool process_record_quantum(keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/quantum.c#L206) + * [このレコードをキーコードにマップする](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/quantum.c#L226) + * [`void velocikey_accelerate(void)`](https://github.com/qmk/qmk_firmware/blob/c1c5922aae7b60b7c7d13d3769350eed9dda17ab/quantum/velocikey.c#L27) + * [`void preprocess_tap_dance(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_tap_dance.c#L119) + * [`bool process_key_lock(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_key_lock.c#L62) + * [`bool process_clicky(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_clicky.c#L79) + * [`bool process_haptic(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/2cee371bf125a6ec541dd7c5a809573facc7c456/drivers/haptic/haptic.c#L216) + * [`bool process_record_kb(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/keyboards/clueboard/card/card.c#L20) + * [`bool process_record_user(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/keyboards/clueboard/card/keymaps/default/keymap.c#L58) + * [`bool process_midi(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_midi.c#L81) + * [`bool process_audio(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_audio.c#L19) + * [`bool process_steno(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_steno.c#L160) + * [`bool process_music(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_music.c#L114) + * [`bool process_key_override(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/5a1b857dea45a17698f6baa7dd1b7a7ea907fb0a/quantum/process_keycode/process_key_override.c#L397) + * [`bool process_tap_dance(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_tap_dance.c#L141) + * [`bool process_unicode_common(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_unicode_common.c#L169) は、以下のいずれかを呼び出します: + * [`bool process_unicode(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_unicode.c#L20) + * [`bool process_unicodemap(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_unicodemap.c#L46) + * [`bool process_ucis(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_ucis.c#L95) + * [`bool process_leader(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_leader.c#L51) + * [`bool process_combo(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_combo.c#L115) + * [`bool process_printer(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_printer.c#L77) + * [`bool process_auto_shift(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_auto_shift.c#L94) + * [`bool process_terminal(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_terminal.c#L264) + * [Quantum 固有のキーコードを識別して処理する](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/quantum.c#L291) この一連のイベントの中の任意のステップで (`process_record_kb()` のような)関数は `false` を返して、以降の処理を停止することができます。 この呼び出しの後で、`post_process_record()` が呼ばれます。これはキーコードが通常処理された後に実行する必要がある追加のクリーンアップを処理するために使うことができます。 * [`void post_process_record(keyrecord_t *record)`]() - * [`void post_process_record_quantum(keyrecord_t *record)`]() - * [このレコードをキーコードにマップする]() - * [`void post_process_clicky(uint16_t keycode, keyrecord_t *record)`]() - * [`void post_process_record_kb(uint16_t keycode, keyrecord_t *record)`]() - * [`void post_process_record_user(uint16_t keycode, keyrecord_t *record)`]() + * [`void post_process_record_quantum(keyrecord_t *record)`]() + * [このレコードをキーコードにマップする]() + * [`void post_process_clicky(uint16_t keycode, keyrecord_t *record)`]() + * [`void post_process_record_kb(uint16_t keycode, keyrecord_t *record)`]() + * [`void post_process_record_user(uint16_t keycode, keyrecord_t *record)`]() This keymap makes user of user/jonavin userspace + +Features + - Split spacebars, Split Backspace + - RGB Winlock indicator (requires LED stripto be installed) + - RGB Layer indicators: FN/MO1 - Purple; LOWER/MO2 - Yellow; RAISE/MO3/NumPad - Green + - quick demo https://youtu.be/gR1awbsouLk + +- Add PrtScr, Scroll Lock, Break, NumLock to Fn layer +- Implement Win key lock using Fn+Win +- Layer 2 (LOWER) when right B is held -- for emoticons +- Layer 2 RGB functions +- Layer 3 (RAISE) mod on Caps Lock with double-tap to switch to this layer, double tap to switch back + - provides arrows on WASD and additional nav keys + right hand numpad with 00; an be used for Alt Code entry + - left spacebar Backspace +- add double tap of Left Shift to toggle Caps Lock + + +rules.mk OPTIONS - Active features from userspace +-------------------------------------------------- + +STARTUP_NUMLOCK_ON = yes +- turns on NUMLOCK by default + +ENCODER_DEFAULTACTIONS_ENABLE = yes +- Enables default encoder funtions + - holding Left shift, change layers + - holding right shift, Navigate page up/down + - holding Left Ctrl, navigate prev/next word + - holding Left Alt, change media prev/next track + - default is change volume + +TD_LSFT_CAPSLOCK_ENABLE = yes + - This will enable double tap on Left Shift to toggle CAPSLOCK when using KC_LSFTCAPS + +IDLE_TIMEOUT_ENABLE = yes + - Enables Timer functionality; for RGB idle timeouts that can be changed dynamically + +EMOTICON_ENABLE + - adds EMO_ keycodes for text emojis + +## All layers diagram +![image](https://user-images.githubusercontent.com/71780717/135770721-ab263532-f645-4903-99cb-749549944e15.png) + diff --git a/keyboards/mechwild/obe/keymaps/jonavin/rules.mk b/keyboards/mechwild/obe/keymaps/jonavin/rules.mk new file mode 100644 index 0000000000..e371b63498 --- /dev/null +++ b/keyboards/mechwild/obe/keymaps/jonavin/rules.mk @@ -0,0 +1,11 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes +RGBLIGHT_ENABLE = yes + +MOUSEKEY_ENABLE = no +TAP_DANCE_ENABLE = yes + +TD_LSFT_CAPSLOCK_ENABLE = yes +STARTUP_NUMLOCK_ON = yes +ENCODER_DEFAULTACTIONS_ENABLE = yes +EMOTICON_ENABLE = yes diff --git a/users/jonavin/jonavin.c b/users/jonavin/jonavin.c index f53aa8664e..1a0760ea8f 100644 --- a/users/jonavin/jonavin.c +++ b/users/jonavin/jonavin.c @@ -256,7 +256,7 @@ along with this program. If not, see . break; } } - return true; + return false; } #endif // ENCODER_ENABLE @@ -266,7 +266,7 @@ __attribute__ ((weak)) bool process_record_keymap(uint16_t keycode, keyrecord_t bool process_record_user(uint16_t keycode, keyrecord_t *record) { if (!process_record_keymap(keycode, record)) { return false; } - switch (keycode) { + switch (keycode) { case KC_00: if (record->event.pressed) { // when keycode KC_00 is pressed @@ -298,6 +298,34 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } else unregister_code16(keycode); break; #endif // RGB_MATRIX_ENABLE + +#ifdef EMOTICON_ENABLE + case EMO_SHRUG: + if (record->event.pressed) SEND_STRING("`\\_(\"/)_/`"); + else unregister_code16(keycode); + break; + case EMO_CONFUSE: + if (record->event.pressed) SEND_STRING("(*_*)"); + else unregister_code16(keycode); + break; + case EMO_TEARS: + if (record->event.pressed) SEND_STRING("(T_T)"); + else unregister_code16(keycode); + break; + case EMO_NERVOUS: + if (record->event.pressed) SEND_STRING("(~_~;)"); + else unregister_code16(keycode); + break; + case EMO_JOY: + if (record->event.pressed) SEND_STRING("(^o^)"); + else unregister_code16(keycode); + break; + case EMO_SAD: + if (record->event.pressed) SEND_STRING(":'-("); + else unregister_code16(keycode); + break; + #endif // EMOTICON_ENABLE + default: if (record->event.pressed) { #ifdef RGB_MATRIX_ENABLE diff --git a/users/jonavin/jonavin.h b/users/jonavin/jonavin.h index efe0301af3..feaf6b6a15 100644 --- a/users/jonavin/jonavin.h +++ b/users/jonavin/jonavin.h @@ -38,13 +38,23 @@ enum custom_user_keycodes { RGB_TOD, // Timeout idle time down RGB_NITE, // Turns off all rgb but allow rgb indicators to work + EMO_SHRUG, // `\_("/)_/` + EMO_CONFUSE, // (*_*) + EMO_SAD, // :'-( + EMO_NERVOUS, // (~_~;) + EMO_JOY, // (^o^) + EMO_TEARS, // (T_T) + NEW_SAFE_RANGE // new safe range for keymap level custom keycodes }; -#define KC_CAD LALT(LCTL(KC_DEL)) +#define KC_CAD LALT(LCTL(KC_DEL)) #define KC_AF4 LALT(KC_F4) #define KC_TASK LCTL(LSFT(KC_ESC)) - +#define CT_PGUP RCTL(KC_PGUP) +#define CT_PGDN RCTL(KC_PGDN) +#define CT_HOME RCTL(KC_HOME) +#define CT_END RCTL(KC_END) #ifdef TD_LSFT_CAPSLOCK_ENABLE // Tap Dance Definitions diff --git a/users/jonavin/readme.md b/users/jonavin/readme.md index c029796b4e..9fccb8c73c 100644 --- a/users/jonavin/readme.md +++ b/users/jonavin/readme.md @@ -14,62 +14,90 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . LAYERS: - 0 = _BASE - 1 = _FN1 - 2 = _LOWER - 3 = _RAISE +- 0 = _BASE +- 1 = _FN1 +- 2 = _LOWER +- 3 = _RAISE KEYCODES: - KC_CAD Ctrl-Alt-Del - KC_AF4 Alt-F4 - KC_TASK Windows Task Manager (Ctrl-Shift-Esc) - LSFT_CAPSLOCK When LSFT_CAPSLOCK_ENABLE is defined, hold for Shift double tap for CAPSLOCK; otherwise, just Shift - KC_00 double zero "00" - KC_WINLCK toggles LGui/Win key lock - RGB_TOI Increase Timeout idle time threshold - RGB_TOD Decrease Timeout idle time threshold +- KC_CAD Ctrl-Alt-Del +- KC_AF4 Alt-F4 +- KC_TASK Windows Task Manager (Ctrl-Shift-Esc) +- LSFT_CAPSLOCK When LSFT_CAPSLOCK_ENABLE is defined, hold for Shift double tap for CAPSLOCK; otherwise, just Shift +- KC_00 double zero "00" +- KC_WINLCK toggles LGui/Win key lock +- RGB_TOI Increase Timeout idle time threshold +- RGB_TOD Decrease Timeout idle time threshold +- CT_PGUP Ctrl-PgUp +- CT_PGDN Ctrl-PgDn +- CT_HOME Ctrl-HOme +- CT_END Ctrl-End +- + When EMOTICON_ENABLE = yes +- EMO_SHRUG `\_("/)_/` +- EMO_CONFUSE (*_*) +- EMD_TEARS (T_T) +- EMO_NERVOUS (~_~;) +- EMO_JOY (^o^) + + +AVAILABLE ENCODER ACTIONS: +- void encoder_action_volume(bool clockwise); +- void encoder_action_mediatrack(bool clockwise); +- void encoder_action_navword(bool clockwise); +- void encoder_action_navpage(bool clockwise); +- +- uint8_t get_selected_layer(void); +- void encoder_action_layerchange(bool clockwise); +- +- void encoder_action_rgb_speed(bool clockwise); +- void encoder_action_rgb_hue(bool clockwise); +- void encoder_action_rgb_saturation(bool clockwise); +- void encoder_action_rgb_brightness(bool clockwise); +- void encoder_action_rgb_mode(bool clockwise); + ENABLE FEATURES your keymap rules.mk +--------------------------------------- STARTUP_NUMLOCK_ON = yes - turns on NUMLOCK by default +- turns on NUMLOCK by default ENCODER_DEFAULTACTIONS_ENABLE = yes - Enabled default encoder funtions - When enabled, use this in the keymap for an additional encoder processing - bool encoder_update_keymap(uint8_t index, bool clockwise) - - OPTION: set ENCODER_DEFAULTACTIONS_INDEX to the encoder number if the encoder is not index 0 +- Enabled default encoder funtions +- When enabled, use this in the keymap for an additional encoder processing +- bool encoder_update_keymap(uint8_t index, bool clockwise) +OPTION: set ENCODER_DEFAULTACTIONS_INDEX to the encoder number if the encoder is not index 0 + TD_LSFT_CAPSLOCK_ENABLE = yes - This will enable double tap on Left Shift to toggle CAPSLOCK - KC_LSFTCAPS to bind to left Shift to enable feature - KC_LSFTCAPSWIN does the same thing but will not turn on CAPS when Win Lkey is disabled +- This will enable double tap on Left Shift to toggle CAPSLOCK +- KC_LSFTCAPS to bind to left Shift to enable feature +- KC_LSFTCAPSWIN does the same thing but will not turn on CAPS when Win Lkey is disabled IDLE_TIMEOUT_ENABLE = yes - Enables Timer functionality; for RGB idle timeouts that can be changed dynamically - When enabled, use this in the keymap for an additional matrix processing - void matrix_scan_keymap(void) - - Functions: - u16int_t get_timeout_threshold(void) // returns the current timeout threshold - void timeout_update_threshold(bool increase) // change threshold: true = increase, false = decrease - void timeout_reset_timer(void) // resets timer (put in process_record_user if you override it) - void timeout_tick_timer(void) // registers time ticks (put in maxtrix_scan_user if you override it) +- Enables Timer functionality; for RGB idle timeouts that can be changed dynamically +- When enabled, use this in the keymap for an additional matrix processing: void matrix_scan_keymap(void) + +- Functions: +- u16int_t get_timeout_threshold(void) // returns the current timeout threshold +- void timeout_update_threshold(bool increase) // change threshold: true = increase, false = decrease +- void timeout_reset_timer(void) // resets timer (put in process_record_user if you override it) +- void timeout_tick_timer(void) // registers time ticks (put in maxtrix_scan_user if you override it) Other Functions: - - activate_numlock(bool turn_on) // true = turn on NUM LOCK, false = off +- activate_numlock(bool turn_on) // true = turn on NUM LOCK, false = off KEYMAP LEVEL ADDITIONAL PROCESSING FUNCTIONS - bool process_record_keymap(uint16_t keycode, keyrecord_t *record) - void keyboard_post_init_keymap(void) +- bool process_record_keymap(uint16_t keycode, keyrecord_t *record) +- void keyboard_post_init_keymap(void) LIST OF COMPATIBLE KEYMAPS - - gmmk/pro/ansi - - keebio/quefrency/rev3 - - mechwild/mercutio - - mechwild/murphpad - - mechwild/OBE (*) - - nopunin10did/kastenwagen (*) +- gmmk/pro/ansi +- keebio/quefrency/rev3 +- mechwild/mercutio +- mechwild/murphpad +- mechwild/OBE +- nopunin10did/kastenwagen (*) (*) coming soon diff --git a/users/jonavin/rules.mk b/users/jonavin/rules.mk index e2918d9e26..eb279f6290 100644 --- a/users/jonavin/rules.mk +++ b/users/jonavin/rules.mk @@ -14,3 +14,6 @@ endif ifeq ($(strip $(COLEMAK_LAYER_ENABLE)), yes) OPT_DEFS += -DCOLEMAK_LAYER_ENABLE endif +ifeq ($(strip $(EMOTICON_ENABLE)), yes) + OPT_DEFS += -DEMOTICON_ENABLE +endif From cecf5d52f9776a07cc7244ab6929899374bc189a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jimmy=20Sj=C3=B6lund?= Date: Tue, 12 Oct 2021 03:04:24 +0200 Subject: [PATCH 260/595] [Keymap] Adding my personal Planck layout (#14564) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- .../planck/keymaps/jimmysjolund/config.h | 49 +++ .../planck/keymaps/jimmysjolund/keymap.c | 367 ++++++++++++++++++ .../planck/keymaps/jimmysjolund/readme.md | 2 + .../planck/keymaps/jimmysjolund/rules.mk | 1 + 4 files changed, 419 insertions(+) create mode 100644 keyboards/planck/keymaps/jimmysjolund/config.h create mode 100644 keyboards/planck/keymaps/jimmysjolund/keymap.c create mode 100644 keyboards/planck/keymaps/jimmysjolund/readme.md create mode 100644 keyboards/planck/keymaps/jimmysjolund/rules.mk diff --git a/keyboards/planck/keymaps/jimmysjolund/config.h b/keyboards/planck/keymaps/jimmysjolund/config.h new file mode 100644 index 0000000000..5606510d49 --- /dev/null +++ b/keyboards/planck/keymaps/jimmysjolund/config.h @@ -0,0 +1,49 @@ +/* Copyright 2021 Jimmy Sjölund + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#ifdef AUDIO_ENABLE + #define STARTUP_SONG SONG(PLANCK_SOUND) + // #define STARTUP_SONG SONG(NO_SOUND) + + #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \ + SONG(COLEMAK_SOUND), \ + SONG(DVORAK_SOUND) \ + } +#endif + +/* + * MIDI options + */ + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ + +#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +// Most tactile encoders have detents every 4 stages +#define ENCODER_RESOLUTION 4 + diff --git a/keyboards/planck/keymaps/jimmysjolund/keymap.c b/keyboards/planck/keymaps/jimmysjolund/keymap.c new file mode 100644 index 0000000000..6b89b99540 --- /dev/null +++ b/keyboards/planck/keymaps/jimmysjolund/keymap.c @@ -0,0 +1,367 @@ +/* Copyright 2015-2017 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H +#include "muse.h" + + +enum planck_layers { + _QWERTY, + _COLEMAK, + _DVORAK, + _LOWER, + _RAISE, + _PLOVER, + _ADJUST +}; + +enum planck_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + PLOVER, + BACKLIT, + EXT_PLV +}; + +#define LOWER MO(_LOWER) +#define RAISE MO(_RAISE) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty - Original + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +/* Qwerty - jimmysjolund 2021-09-22 + * ,-----------------------------------------------------------------------------------. + * | Esc | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Tab | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Shift | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Del | Ctrl | GUI | Alt |Lower |Raise |Enter |Space |AltGr | Down | Up |Enter | + * `-----------------------------------------------------------------------------------' + */ + +[_QWERTY] = LAYOUT_planck_grid( + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_DEL, KC_LCTL, KC_LGUI, KC_LALT, LOWER, RAISE, KC_ENT, KC_SPC, KC_ALGR, KC_DOWN, KC_UP, KC_ENT +), + +/* Colemak Original + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +/* Colemak jimmysjolund + * ,-----------------------------------------------------------------------------------. + * | Esc | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Tab | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Shift | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Del | Ctrl | GUI | Alt |Lower |Raise |Enter |Space |AltGr | Down | Up |Enter | + * `-----------------------------------------------------------------------------------' + */ +[_COLEMAK] = LAYOUT_planck_grid( + KC_ESC, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, + KC_TAB, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_DEL, KC_LCTL, KC_LGUI, KC_LALT, LOWER, RAISE, KC_ENT, KC_SPC, KC_ALGR, KC_DOWN, KC_UP, KC_ENT +), + +/* Dvorak + * ,-----------------------------------------------------------------------------------. + * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | O | E | U | I | D | H | T | N | S | / | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_DVORAK] = LAYOUT_planck_grid( + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, + KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT , + BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT +), + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / |Pg Up |Pg Dn | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = LAYOUT_planck_grid( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______, + _______, _______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT +), + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | Home | End | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = LAYOUT_planck_grid( + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END, _______, + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY +), + + +/* Plover layer (http://opensteno.org) + * ,-----------------------------------------------------------------------------------. + * | # | # | # | # | # | # | # | # | # | # | # | # | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | S | T | P | H | * | * | F | P | L | T | D | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | S | K | W | R | * | * | R | B | G | S | Z | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Exit | | | A | O | | E | U | | | | + * `-----------------------------------------------------------------------------------' + */ +[_PLOVER] = LAYOUT_planck_grid( + KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1 , + XXXXXXX, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, + XXXXXXX, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + EXT_PLV, XXXXXXX, XXXXXXX, KC_C, KC_V, XXXXXXX, XXXXXXX, KC_N, KC_M, XXXXXXX, XXXXXXX, XXXXXXX +), + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | | Reset| | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover| | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof| | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = LAYOUT_planck_grid( + _______, RESET, DEBUG, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_DEL , + _______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______, + _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, TERM_ON, TERM_OFF, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ +) + +}; + +#ifdef AUDIO_ENABLE + float plover_song[][2] = SONG(PLOVER_SOUND); + float plover_gb_song[][2] = SONG(PLOVER_GOODBYE_SOUND); +#endif + +layer_state_t layer_state_set_user(layer_state_t state) { + return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + print("mode just switched to qwerty and this is a huge string\n"); + set_single_persistent_default_layer(_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + set_single_persistent_default_layer(_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + set_single_persistent_default_layer(_DVORAK); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + #ifdef KEYBOARD_planck_rev5 + PORTE &= ~(1<<6); + #endif + } else { + unregister_code(KC_RSFT); + #ifdef KEYBOARD_planck_rev5 + PORTE |= (1<<6); + #endif + } + return false; + break; + case PLOVER: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + stop_all_notes(); + PLAY_SONG(plover_song); + #endif + layer_off(_RAISE); + layer_off(_LOWER); + layer_off(_ADJUST); + layer_on(_PLOVER); + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } + keymap_config.raw = eeconfig_read_keymap(); + keymap_config.nkro = 1; + eeconfig_update_keymap(keymap_config.raw); + } + return false; + break; + case EXT_PLV: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_SONG(plover_gb_song); + #endif + layer_off(_PLOVER); + } + return false; + break; + } + return true; +} + +bool muse_mode = false; +uint8_t last_muse_note = 0; +uint16_t muse_counter = 0; +uint8_t muse_offset = 70; +uint16_t muse_tempo = 50; + +bool encoder_update_user(uint8_t index, bool clockwise) { + if (muse_mode) { + if (IS_LAYER_ON(_RAISE)) { + if (clockwise) { + muse_offset++; + } else { + muse_offset--; + } + } else { + if (clockwise) { + muse_tempo+=1; + } else { + muse_tempo-=1; + } + } + } else { + if (clockwise) { + #ifdef MOUSEKEY_ENABLE + tap_code(KC_MS_WH_DOWN); + #else + tap_code(KC_PGDN); + #endif + } else { + #ifdef MOUSEKEY_ENABLE + tap_code(KC_MS_WH_UP); + #else + tap_code(KC_PGUP); + #endif + } + } + return false; +} + +bool dip_update_user(uint8_t index, bool active) { + switch (index) { + case 0: + if (active) { + #ifdef AUDIO_ENABLE + PLAY_SONG(plover_song); + #endif + layer_on(_ADJUST); + } else { + #ifdef AUDIO_ENABLE + PLAY_SONG(plover_gb_song); + #endif + layer_off(_ADJUST); + } + break; + case 1: + if (active) { + muse_mode = true; + } else { + muse_mode = false; + #ifdef AUDIO_ENABLE + stop_all_notes(); + #endif + } + } + return false; +} + +void matrix_scan_user(void) { + #ifdef AUDIO_ENABLE + if (muse_mode) { + if (muse_counter == 0) { + uint8_t muse_note = muse_offset + SCALE[muse_clock_pulse()]; + if (muse_note != last_muse_note) { + stop_note(compute_freq_for_midi_note(last_muse_note)); + play_note(compute_freq_for_midi_note(muse_note), 0xF); + last_muse_note = muse_note; + } + } + muse_counter = (muse_counter + 1) % muse_tempo; + } + #endif +} + +bool music_mask_user(uint16_t keycode) { + switch (keycode) { + case RAISE: + case LOWER: + return false; + default: + return true; + } +} diff --git a/keyboards/planck/keymaps/jimmysjolund/readme.md b/keyboards/planck/keymaps/jimmysjolund/readme.md new file mode 100644 index 0000000000..de9680b498 --- /dev/null +++ b/keyboards/planck/keymaps/jimmysjolund/readme.md @@ -0,0 +1,2 @@ +# The Default Planck Layout + diff --git a/keyboards/planck/keymaps/jimmysjolund/rules.mk b/keyboards/planck/keymaps/jimmysjolund/rules.mk new file mode 100644 index 0000000000..dcf16bef39 --- /dev/null +++ b/keyboards/planck/keymaps/jimmysjolund/rules.mk @@ -0,0 +1 @@ +SRC += muse.c From 598f3fa7a76412b45745962b79ec34c7b8fde70e Mon Sep 17 00:00:00 2001 From: Sergi Meseguer Date: Tue, 12 Oct 2021 03:04:47 +0200 Subject: [PATCH 261/595] [Keyboard] z34 split keyboard by zigotica (#14582) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- keyboards/z34/config.h | 65 +++++++++++++++++++++ keyboards/z34/info.json | 52 +++++++++++++++++ keyboards/z34/keymaps/default/config.h | 22 +++++++ keyboards/z34/keymaps/default/keymap.c | 77 +++++++++++++++++++++++++ keyboards/z34/keymaps/default/readme.md | 3 + keyboards/z34/keymaps/default/rules.mk | 3 + keyboards/z34/readme.md | 3 + keyboards/z34/rules.mk | 28 +++++++++ keyboards/z34/z34.c | 17 ++++++ keyboards/z34/z34.h | 39 +++++++++++++ 10 files changed, 309 insertions(+) create mode 100644 keyboards/z34/config.h create mode 100644 keyboards/z34/info.json create mode 100644 keyboards/z34/keymaps/default/config.h create mode 100644 keyboards/z34/keymaps/default/keymap.c create mode 100644 keyboards/z34/keymaps/default/readme.md create mode 100644 keyboards/z34/keymaps/default/rules.mk create mode 100644 keyboards/z34/readme.md create mode 100644 keyboards/z34/rules.mk create mode 100644 keyboards/z34/z34.c create mode 100644 keyboards/z34/z34.h diff --git a/keyboards/z34/config.h b/keyboards/z34/config.h new file mode 100644 index 0000000000..71d6528ce8 --- /dev/null +++ b/keyboards/z34/config.h @@ -0,0 +1,65 @@ +/* Copyright 2020 Sergi Meseguer + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x7A74 +#define PRODUCT_ID 0x0002 +#define DEVICE_VER 0x0001 +#define MANUFACTURER zigotica +#define PRODUCT z34 + +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 5 + +/*Keyboard Matrix Assignments */ + +#define DIRECT_PINS { \ + { C6, F7, F6, F5, F4 }, \ + { D7, B6, B2, B3, B1 }, \ + { E6, D4, D0, D1, D3 }, \ + { B4, B5, NO_PIN, NO_PIN, NO_PIN } \ +} + +#define DIRECT_PINS_RIGHT { \ + { F4, F5, F6, F7, C6 }, \ + { B1, B3, B2, B6, D7 }, \ + { D3, D1, D0, D4, E6 }, \ + { B5, B4, NO_PIN, NO_PIN, NO_PIN } \ +} + +#define UNUSED_PINS + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* Serial settings */ +#define USE_SERIAL +/* serial.c configuration for split keyboard */ +#define SOFT_SERIAL_PIN D2 + +// EE_HANDS MASTER_RIGHT MASTER_LEFT +#define MASTER_RIGHT + diff --git a/keyboards/z34/info.json b/keyboards/z34/info.json new file mode 100644 index 0000000000..4a6dce7525 --- /dev/null +++ b/keyboards/z34/info.json @@ -0,0 +1,52 @@ +{ + "keyboard_name": "z34", + "url": "https://github.com/zigotica/mechanical-keyboards/tree/main/z34", + "maintainer": "@zigotica", + "layouts": { + "LAYOUT": { + "layout": [ + {"x": 0, "y": 0.93}, + {"x": 1, "y": 0.31}, + {"x": 2, "y": 0}, + {"x": 3, "y": 0.28}, + {"x": 4, "y": 0.42}, + + {"x": 7, "y": 0.42}, + {"x": 8, "y": 0.28}, + {"x": 9, "y": 0}, + {"x": 10, "y": 0.31}, + {"x": 11, "y": 0.93}, + + {"x": 0, "y": 1.93}, + {"x": 1, "y": 1.31}, + {"x": 2, "y": 1}, + {"x": 3, "y": 1.28}, + {"x": 4, "y": 1.42}, + + {"x": 7, "y": 1.42}, + {"x": 8, "y": 1.28}, + {"x": 9, "y": 1}, + {"x": 10, "y": 1.31}, + {"x": 11, "y": 1.93}, + + {"x": 0, "y": 2.93}, + {"x": 1, "y": 2.31}, + {"x": 2, "y": 2}, + {"x": 3, "y": 2.28}, + {"x": 4, "y": 2.42}, + + {"x": 7, "y": 2.42}, + {"x": 8, "y": 2.28}, + {"x": 9, "y": 2}, + {"x": 10, "y": 2.31}, + {"x": 11, "y": 2.93}, + + {"x": 3.5, "y": 3.5}, + {"x": 4.5, "y": 4}, + + {"x": 6.5, "y": 4}, + {"x": 7.5, "y": 3.5} + ] + } + } +} diff --git a/keyboards/z34/keymaps/default/config.h b/keyboards/z34/keymaps/default/config.h new file mode 100644 index 0000000000..ae9881d3ab --- /dev/null +++ b/keyboards/z34/keymaps/default/config.h @@ -0,0 +1,22 @@ +/* Copyright 2020 Sergi Meseguer + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +// EE_HANDS MASTER_RIGHT MASTER_LEFT +#define MASTER_RIGHT diff --git a/keyboards/z34/keymaps/default/keymap.c b/keyboards/z34/keymaps/default/keymap.c new file mode 100644 index 0000000000..973d24eafb --- /dev/null +++ b/keyboards/z34/keymaps/default/keymap.c @@ -0,0 +1,77 @@ +/* Copyright 2020 Sergi Meseguer + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + +enum layers { + BASE = 0 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* + * Base Layer: BASE + * + * ,---------------------------------------. ,---------------------------------------. + * | | | | | | | | | | | | + * | Q | W | E | R | T | | Y | U | I | O | P | + * | | | | | | | | | | | | + * |-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------| + * | | | | | | | | | | | | + * | A | S | D | F | G | | H | J | K | L | ' | + * | | | | | | | | | | | | + * |-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------| + * | | | | | | | | | | | | + * | Z | X | C | V | B | | N | M | , | . | / | + * | | | | | | | | | | | | + * `-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------. + * | | | | | | + * | ESC | SPC | | ENTER | BSPC | + * | | | | | | + * `---------------' `---------------' + * + */ + [BASE] = LAYOUT( + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, + KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOT, + KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, + KC_ESC, KC_SPC, KC_ENT, KC_BSPC + ), + +/* + * TEMPLATE + * + * ,---------------------------------------. ,---------------------------------------. + * | | | | | | | | | | | | + * | | | | | | | | | | | | + * | | | | | | | | | | | | + * |-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------| + * | | | | | | | | | | | | + * | | | | | | | | | | | | + * | | | | | | | | | | | | + * |-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------| + * | | | | | | | | | | | | + * | | | | | | | | | | | | + * | | | | | | | | | | | | + * `-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------. + * | | | | | | + * | | | | | | + * | | | | | | + * `---------------' `---------------' + * + */ + +}; + diff --git a/keyboards/z34/keymaps/default/readme.md b/keyboards/z34/keymaps/default/readme.md new file mode 100644 index 0000000000..c6a0115573 --- /dev/null +++ b/keyboards/z34/keymaps/default/readme.md @@ -0,0 +1,3 @@ +# Default z34 Layout + +This is the default QWERTY layout that comes flashed on every z34. diff --git a/keyboards/z34/keymaps/default/rules.mk b/keyboards/z34/keymaps/default/rules.mk new file mode 100644 index 0000000000..9281e9843b --- /dev/null +++ b/keyboards/z34/keymaps/default/rules.mk @@ -0,0 +1,3 @@ +# There are no extra pins, so we make sure to disable OLED and Encoders +OLED_ENABLE = no # Enables the use of OLED displays +ENCODER_ENABLE = no # Enables the use of encoders diff --git a/keyboards/z34/readme.md b/keyboards/z34/readme.md new file mode 100644 index 0000000000..29bbf571a3 --- /dev/null +++ b/keyboards/z34/readme.md @@ -0,0 +1,3 @@ +# z34 + +Firmware for [z34 split keyboard](https://github.com/zigotica/mechanical-keyboards/tree/main/z34) designed by @zigotica diff --git a/keyboards/z34/rules.mk b/keyboards/z34/rules.mk new file mode 100644 index 0000000000..6370c7a93f --- /dev/null +++ b/keyboards/z34/rules.mk @@ -0,0 +1,28 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = caterina + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +SPLIT_KEYBOARD = yes # Split common +LTO_ENABLE = yes # Enables Link Time Optimization (LTO) which reduces the compiled size + +# There are no extra pins, so we make sure to disable OLED and Encoders +OLED_SUPPORTED = no # Enables the use of OLED displays +ENCODER_SUPPORTED = no # Enables the use of encoders + diff --git a/keyboards/z34/z34.c b/keyboards/z34/z34.c new file mode 100644 index 0000000000..779562e630 --- /dev/null +++ b/keyboards/z34/z34.c @@ -0,0 +1,17 @@ +/* Copyright 2020 Sergi Meseguer + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "z34.h" diff --git a/keyboards/z34/z34.h b/keyboards/z34/z34.h new file mode 100644 index 0000000000..3def2d4c2c --- /dev/null +++ b/keyboards/z34/z34.h @@ -0,0 +1,39 @@ +/* Copyright 2020 Sergi Meseguer + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "quantum.h" + +/* This a shortcut to help you visually see your layout */ + +#define ___ KC_NO + +#define LAYOUT( \ + L05, L04, L03, L02, L01, R01, R02, R03, R04, R05, \ + L10, L09, L08, L07, L06, R06, R07, R08, R09, R10, \ + L15, L14, L13, L12, L11, R11, R12, R13, R14, R15, \ + L17, L16, R16, R17 \ + ) \ + { \ + { L05, L04, L03, L02, L01 }, \ + { L10, L09, L08, L07, L06 }, \ + { L15, L14, L13, L12, L11 }, \ + { L17, L16, ___, ___ , ___}, \ + { R01, R02, R03, R04, R05 }, \ + { R06, R07, R08, R09, R10 }, \ + { R11, R12, R13, R14, R15 }, \ + { R16, R17, ___, ___, ___ } \ + } + From e33ccc556f594e1335e003ac2e8fe84154bfa16e Mon Sep 17 00:00:00 2001 From: thompson-ele Date: Mon, 11 Oct 2021 18:06:48 -0700 Subject: [PATCH 262/595] [Keymap] Added Gherkin VIA keymap (#14779) --- .../gherkin/keymaps/via/keymap.c | 45 +++++++++++++++++++ .../gherkin/keymaps/via/rules.mk | 2 + 2 files changed, 47 insertions(+) create mode 100644 keyboards/40percentclub/gherkin/keymaps/via/keymap.c create mode 100644 keyboards/40percentclub/gherkin/keymaps/via/rules.mk diff --git a/keyboards/40percentclub/gherkin/keymaps/via/keymap.c b/keyboards/40percentclub/gherkin/keymaps/via/keymap.c new file mode 100644 index 0000000000..d119e6ae91 --- /dev/null +++ b/keyboards/40percentclub/gherkin/keymaps/via/keymap.c @@ -0,0 +1,45 @@ +/* +Copyright 2021 keebnewb + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_ortho_3x10( + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, + KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ESC, + KC_Z, KC_X, KC_C, KC_V, KC_BSPC, KC_SPC, KC_B, KC_N, KC_M, KC_ENT + ), + + [1] = LAYOUT_ortho_3x10( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + [2] = LAYOUT_ortho_3x10( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + [3] = LAYOUT_ortho_3x10( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/40percentclub/gherkin/keymaps/via/rules.mk b/keyboards/40percentclub/gherkin/keymaps/via/rules.mk new file mode 100644 index 0000000000..36b7ba9cbc --- /dev/null +++ b/keyboards/40percentclub/gherkin/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes From 8385ab32d056dae61546279c9d778dd1a20eaada Mon Sep 17 00:00:00 2001 From: Joris Wachsmuth <52176899+PercyJW-2@users.noreply.github.com> Date: Tue, 12 Oct 2021 03:09:25 +0200 Subject: [PATCH 263/595] [Keyboard] Add Split65 to keyboards/handwired (#13264) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan Co-authored-by: Joris Wachsmuth --- keyboards/handwired/split65/info.json | 93 +++++++++++++ .../split65/keymaps/default/keymap.c | 65 +++++++++ .../handwired/split65/keymaps/via/keymap.c | 65 +++++++++ .../handwired/split65/keymaps/via/rules.mk | 1 + keyboards/handwired/split65/promicro/config.h | 53 +++++++ .../handwired/split65/promicro/promicro.c | 16 +++ .../handwired/split65/promicro/promicro.h | 38 +++++ keyboards/handwired/split65/promicro/rules.mk | 23 ++++ keyboards/handwired/split65/readme.md | 25 ++++ keyboards/handwired/split65/split65.c | 130 ++++++++++++++++++ keyboards/handwired/split65/split65.h | 24 ++++ keyboards/handwired/split65/stm32/config.h | 60 ++++++++ keyboards/handwired/split65/stm32/halconf.h | 21 +++ keyboards/handwired/split65/stm32/rules.mk | 25 ++++ keyboards/handwired/split65/stm32/stm32.c | 16 +++ keyboards/handwired/split65/stm32/stm32.h | 38 +++++ 16 files changed, 693 insertions(+) create mode 100644 keyboards/handwired/split65/info.json create mode 100644 keyboards/handwired/split65/keymaps/default/keymap.c create mode 100644 keyboards/handwired/split65/keymaps/via/keymap.c create mode 100644 keyboards/handwired/split65/keymaps/via/rules.mk create mode 100644 keyboards/handwired/split65/promicro/config.h create mode 100644 keyboards/handwired/split65/promicro/promicro.c create mode 100644 keyboards/handwired/split65/promicro/promicro.h create mode 100644 keyboards/handwired/split65/promicro/rules.mk create mode 100644 keyboards/handwired/split65/readme.md create mode 100644 keyboards/handwired/split65/split65.c create mode 100644 keyboards/handwired/split65/split65.h create mode 100644 keyboards/handwired/split65/stm32/config.h create mode 100644 keyboards/handwired/split65/stm32/halconf.h create mode 100644 keyboards/handwired/split65/stm32/rules.mk create mode 100644 keyboards/handwired/split65/stm32/stm32.c create mode 100644 keyboards/handwired/split65/stm32/stm32.h diff --git a/keyboards/handwired/split65/info.json b/keyboards/handwired/split65/info.json new file mode 100644 index 0000000000..543fc9c394 --- /dev/null +++ b/keyboards/handwired/split65/info.json @@ -0,0 +1,93 @@ +{ + "keyboard_name": "split65", + "url": "https://github.com/PercyJW-2/Split65", + "maintainer": "PercyJW-2", + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"\u00ac", "x":0, "y":0}, + {"label":"!", "x":1, "y":0}, + {"label":"\"", "x":2, "y":0}, + {"label":"\u00a3", "x":3, "y":0}, + {"label":"$", "x":4, "y":0}, + + {"label":"%", "x":5, "y":0}, + {"label":"^", "x":6, "y":0}, + {"label":"&", "x":7, "y":0}, + {"label":"*", "x":8, "y":0}, + {"label":"(", "x":9, "y":0}, + + {"label":")", "x":10, "y":0}, + {"label":"_", "x":11, "y":0}, + {"label":"+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0, "w":2}, + {"x":15, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + + {"label":"P", "x":10.5, "y":1}, + {"label":"{", "x":11.5, "y":1}, + {"label":"}", "x":12.5, "y":1}, + {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, + {"x":15, "y":1}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + + {"label":":", "x":10.75, "y":2}, + {"label":"@", "x":11.75, "y":2}, + {"label":"~", "x":12.75, "y":2}, + {"x":15, "y":2}, + {"label":"Shift", "x":0, "y":3, "w":1.25}, + + {"label":"|", "x":1.25, "y":3}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":"<", "x":9.25, "y":3}, + {"label":">", "x":10.25, "y":3}, + + {"label":"?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"UP", "x":14, "y":3}, + {"x":15, "y":3}, + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + + {"label":"Win", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":3}, + {"x":6.75, "y":4, "w":3.25}, + {"label":"AltGr", "x":10, "y":4}, + + {"label":"Win", "x":11, "y":4}, + {"label":"Menu", "x":12, "y":4}, + {"label":"LEFT", "x":13, "y":4}, + {"label":"DOWN", "x":14, "y":4}, + {"label":"RIGHT", "x":15, "y":4}] + } + } +} diff --git a/keyboards/handwired/split65/keymaps/default/keymap.c b/keyboards/handwired/split65/keymaps/default/keymap.c new file mode 100644 index 0000000000..acb9b679eb --- /dev/null +++ b/keyboards/handwired/split65/keymaps/default/keymap.c @@ -0,0 +1,65 @@ +/* Copyright 2020-2021 PercyJW-2 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +enum layer_names { + _QWERTY, + _LOWER, + _RAISE, + _ADJUST, +}; + +#define LOWER MO(_LOWER) +#define RAISE MO(_RAISE) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_QWERTY] = LAYOUT( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_PGUP, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_ENT, KC_RALT, LOWER, RAISE, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [_LOWER] = LAYOUT( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, + _______, _______, KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [_RAISE] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [_ADJUST] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; + +layer_state_t layer_state_set_user(layer_state_t state) { + return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST); +} diff --git a/keyboards/handwired/split65/keymaps/via/keymap.c b/keyboards/handwired/split65/keymaps/via/keymap.c new file mode 100644 index 0000000000..acb9b679eb --- /dev/null +++ b/keyboards/handwired/split65/keymaps/via/keymap.c @@ -0,0 +1,65 @@ +/* Copyright 2020-2021 PercyJW-2 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +enum layer_names { + _QWERTY, + _LOWER, + _RAISE, + _ADJUST, +}; + +#define LOWER MO(_LOWER) +#define RAISE MO(_RAISE) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_QWERTY] = LAYOUT( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_PGUP, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_ENT, KC_RALT, LOWER, RAISE, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [_LOWER] = LAYOUT( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, + _______, _______, KC_UP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [_RAISE] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [_ADJUST] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; + +layer_state_t layer_state_set_user(layer_state_t state) { + return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST); +} diff --git a/keyboards/handwired/split65/keymaps/via/rules.mk b/keyboards/handwired/split65/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/handwired/split65/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/handwired/split65/promicro/config.h b/keyboards/handwired/split65/promicro/config.h new file mode 100644 index 0000000000..824dc76402 --- /dev/null +++ b/keyboards/handwired/split65/promicro/config.h @@ -0,0 +1,53 @@ +/* Copyright 2020-2021 PercyJW-2 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + + +#include "config_common.h" + +// USB Device descriptor parameter +#define VENDOR_ID 0x4A57 // JW +#define PRODUCT_ID 0x0000 // first keeb +#define DEVICE_VER 0x0000 // first revision +#define MANUFACTURER percyjw +#define PRODUCT split65 + +// Matrix Assignments +#define MATRIX_ROWS 10 //Rows are doubled-up +#define MATRIX_COLS 8 + +#define MATRIX_COL_PINS {F4, F5, F6, F7, B1, B3, B2, B6} +#define MATRIX_ROW_PINS {D4, C6, D7, E6, B4} + +// COL2ROW, ROW2COL +#define DIODE_DIRECTION COL2ROW + +#define MATRIX_IO_DELAY 5 + +// Split Keyboard specifics +#define SOFT_SERIAL_PIN D3 +#define SELECT_SOFT_SERIAL_SPEED 1 + +// Debounce to reduce unintended double-presses use 0 if not needed +#define DEBOUNCE 5 + +// Feature diable options +//#define NO_DEBUG +//#define NO_PRINT +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +#define OLED_DISPLAY_128X64 diff --git a/keyboards/handwired/split65/promicro/promicro.c b/keyboards/handwired/split65/promicro/promicro.c new file mode 100644 index 0000000000..2f7e1ebab4 --- /dev/null +++ b/keyboards/handwired/split65/promicro/promicro.c @@ -0,0 +1,16 @@ +/* Copyright 2020-2021 PercyJW-2 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "promicro.h" diff --git a/keyboards/handwired/split65/promicro/promicro.h b/keyboards/handwired/split65/promicro/promicro.h new file mode 100644 index 0000000000..204f0b88de --- /dev/null +++ b/keyboards/handwired/split65/promicro/promicro.h @@ -0,0 +1,38 @@ +/* Copyright 2020-2021 PercyJW-2 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "split65.h" + +#define LAYOUT( \ + L00, L01, L02, L03, L04, L05, L06, R07, R06, R05, R04, R03, R02, R01, R00, \ + L10, L11, L12, L13, L14, L15, R17, R16, R15, R14, R13, R12, R11, R10, \ + L20, L21, L22, L23, L24, L25, R47, R27, R26, R25, R24, R23, R22, R21, R20, \ + L30, L31, L32, L33, L34, L35, L36, R37, R36, R35, R34, R33, R32, R31, R30, \ + L40, L41, L42, L43, R46, R45, R44, R43, R42, R41, R40 \ + ) \ + { \ + {L00, L01, L02, L03, L04, L05, L06, KC_NO}, \ + {L10, L11, L12, L13, L14, L15, KC_NO, KC_NO}, \ + {L20, L21, L22, L23, L24, L25, KC_NO, KC_NO}, \ + {L30, L31, L32, L33, L34, L35, L36, KC_NO}, \ + {L40, L41, L42, KC_NO, L43, KC_NO, KC_NO, KC_NO}, \ + {R00, R01, R02, R03, R04, R05, R06, R07}, \ + {R10, R11, R12, R13, R14, R15, R16, R17}, \ + {R20, R21, R22, R23, R24, R25, R26, R27}, \ + {R30, R31, R32, R33, R34, R35, R36, R37}, \ + {R40, R41, R42, R43, R44, R45, R46, R47} \ + } diff --git a/keyboards/handwired/split65/promicro/rules.mk b/keyboards/handwired/split65/promicro/rules.mk new file mode 100644 index 0000000000..bb95fcf67c --- /dev/null +++ b/keyboards/handwired/split65/promicro/rules.mk @@ -0,0 +1,23 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = caterina + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = no # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +OLED_ENABLE = yes +SPLIT_KEYBOARD = yes diff --git a/keyboards/handwired/split65/readme.md b/keyboards/handwired/split65/readme.md new file mode 100644 index 0000000000..39dda3c3a5 --- /dev/null +++ b/keyboards/handwired/split65/readme.md @@ -0,0 +1,25 @@ +# Split65 + +An split 65% keyboard with two OLEDs + +* Keyboard Maintainer: [Percy-JW2](https://github.com/PercyJW-2) +* Hardware Supported: ProMicro and compatibles, Proton C +* Hardware Availability: [Repository](https://github.com/PercyJW-2/Split65) + +Make example for this keyboard with an ProMicro: + + make handwired/split65/promicro:default + +Make example for this keyboard with an Proton C: + + make handwired/split65/stm32:default + +Example for flashing this keyboard with an ProMicro + + make handwired/split65/promicro:default:flash + +Example for flashing this keyboard with an Proton C + + make handwired/split65/stm32:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/handwired/split65/split65.c b/keyboards/handwired/split65/split65.c new file mode 100644 index 0000000000..3b1dcaddae --- /dev/null +++ b/keyboards/handwired/split65/split65.c @@ -0,0 +1,130 @@ +/* Copyright 2020-2021 PercyJW-2 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "split65.h" + +// OLED Code inspired by https://github.com/qmk/qmk_firmware/blob/master/keyboards/splitkb/kyria/rev1/rev1.c + +#ifdef OLED_ENABLE +__attribute__((weak)) oled_rotation_t oled_init_user(oled_rotation_t rotation) { + return OLED_ROTATION_180; +} + +__attribute__((weak)) void oled_task_user(void) { + if (is_keyboard_master()) { + static const char PROGMEM qmk_logo[] = { + 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, + 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, + 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,0}; + + oled_write_P(qmk_logo, false); + + oled_write_P(PSTR("Split65\n\n"), false); + + // Host Keyboard Layer Status + oled_write_P(PSTR("Layer: "), false); + switch (get_highest_layer(layer_state)) { + case 0: + oled_write_P(PSTR("Default\n"), false); + break; + case 1: + oled_write_P(PSTR("Lower\n"), false); + break; + case 2: + oled_write_P(PSTR("Raise\n"), false); + break; + case 3: + oled_write_P(PSTR("Adjust\n"), false); + break; + default: + oled_write_P(PSTR("Undefined\n"), false); + } + + // Host Keyboard LED Status + led_t led_state = host_keyboard_led_state(); + oled_write_P(led_state.num_lock ? PSTR("NUMLCK ") : PSTR(" "), false); + oled_write_P(led_state.caps_lock ? PSTR("CAPLCK ") : PSTR(" "), false); + oled_write_P(led_state.scroll_lock ? PSTR("SCRLCK ") : PSTR(" "), false); + } else { + static const char PROGMEM split65_logo[] = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80, + 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, 0x80, 0x80, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xfe, 0xff, 0xff, 0xef, 0xc7, 0xc7, 0x87, + 0x87, 0x87, 0x87, 0x07, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0x07, + 0x07, 0x07, 0x07, 0x07, 0xdf, 0xff, 0xfe, 0xfe, 0xfc, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, + 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, + 0xff, 0x00, 0x00, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0xff, 0xff, 0xff, 0xff, 0xff, 0x07, 0x07, + 0x07, 0x07, 0x07, 0x07, 0x00, 0x00, 0xf0, 0xfc, 0xfe, 0xfe, 0x9f, 0xcf, 0xc7, 0xc7, 0xc3, 0xc3, + 0xc7, 0x87, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xef, 0xc7, 0xc7, 0xc7, 0xc7, + 0xc7, 0xc7, 0x87, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0xc1, 0x81, 0x81, + 0x81, 0x01, 0x05, 0x0d, 0x0d, 0x0c, 0x9c, 0xfc, 0xfc, 0xfc, 0xf9, 0x01, 0x01, 0x01, 0x01, 0x01, + 0xf9, 0xf9, 0xf9, 0xf9, 0x19, 0x19, 0x19, 0x19, 0x1d, 0x0c, 0x0c, 0x0c, 0x01, 0x01, 0x01, 0x01, + 0x01, 0xf8, 0xfc, 0xfc, 0xfc, 0xfc, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x81, 0x81, 0x01, 0x01, + 0x01, 0xf8, 0xfc, 0xfc, 0xfc, 0xfc, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0xf8, 0xfc, + 0xfc, 0xfc, 0xfc, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x7d, 0xfd, 0xfd, 0xf9, 0xfd, + 0x01, 0x01, 0x01, 0x00, 0x88, 0xfc, 0xfc, 0xfc, 0xf9, 0x01, 0x01, 0x01, 0x81, 0x81, 0x81, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x80, 0xfc, 0xfc, 0xfc, 0xfc, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x03, 0x07, + 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x03, 0x03, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x07, 0x07, 0x07, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x03, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x00, 0x00, + 0x00, 0x03, 0x07, 0x07, 0x07, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x07, + 0x07, 0x07, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x03, 0x03, 0x07, + 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x03, 0x01, 0x00, 0x00, 0x00, 0x00, 0x03, 0x07, 0x07, 0x07, + 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, 0x03, 0x03, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 + }; + oled_write_raw_P(split65_logo, sizeof(split65_logo)); + } +} +#endif diff --git a/keyboards/handwired/split65/split65.h b/keyboards/handwired/split65/split65.h new file mode 100644 index 0000000000..7f60ab0bde --- /dev/null +++ b/keyboards/handwired/split65/split65.h @@ -0,0 +1,24 @@ +/* Copyright 2020-2021 PercyJW-2 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" + +#if defined(KEYBOARD_handwired_split65_stm32) + #include "stm32.h" +#elif defined(KEYBOARD_handwired_split65_promicro) + #include "promicro.h" +#endif diff --git a/keyboards/handwired/split65/stm32/config.h b/keyboards/handwired/split65/stm32/config.h new file mode 100644 index 0000000000..28df964423 --- /dev/null +++ b/keyboards/handwired/split65/stm32/config.h @@ -0,0 +1,60 @@ +/* Copyright 2020-2021 PercyJW-2 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "config_common.h" + +// USB Device descriptor parameter +#define VENDOR_ID 0x4A57 // JW +#define PRODUCT_ID 0x0000 // first keeb +#define DEVICE_VER 0x0000 // first revision +#define MANUFACTURER percyjw +#define PRODUCT split65 + +// Audio +#define AUDIO_PIN A5 +#define AUDIO_PIN_ALT A4 +#define AUDIO_PIN_ALT_AS_NEGATIVE + +// Matrix Assignments +#define MATRIX_ROWS 10 //Rows are doubled-up +#define MATRIX_COLS 8 + +#define MATRIX_COL_PINS {A2, A1, A0, B8, B13, B14, B15, B9} +#define MATRIX_ROW_PINS {B5, B4, B3, B2, B1} + +// COL2ROW, ROW2COL +#define DIODE_DIRECTION COL2ROW + +#define MATRIX_IO_DELAY 5 + +// Split Keyboard specifics +#define SOFT_SERIAL_PIN A9 +#define SELECT_SOFT_SERIAL_SPEED 1 +#define SERIAL_USART_DRIVER SD1 +#define SERIAL_USART_TX_PAL_MODE 7 +#define SERIAL_USART_TIMEOUT 100 + +// Debounce to reduce unintended double-presses use 0 if not needed +#define DEBOUNCE 5 + +// Feature diable options +//#define NO_DEBUG +//#define NO_PRINT +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +#define OLED_DISPLAY_128X64 diff --git a/keyboards/handwired/split65/stm32/halconf.h b/keyboards/handwired/split65/stm32/halconf.h new file mode 100644 index 0000000000..f3bfd154d1 --- /dev/null +++ b/keyboards/handwired/split65/stm32/halconf.h @@ -0,0 +1,21 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#define HAL_USE_SERIAL TRUE + +#include_next diff --git a/keyboards/handwired/split65/stm32/rules.mk b/keyboards/handwired/split65/stm32/rules.mk new file mode 100644 index 0000000000..cb54c352fa --- /dev/null +++ b/keyboards/handwired/split65/stm32/rules.mk @@ -0,0 +1,25 @@ +# MCU name +MCU = STM32F303 +BOARD = QMK_PROTON_C + +# Bootloader selection +BOOTLOADER = stm32-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = no # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = yes # Audio output +OLED_ENABLE = yes +SPLIT_KEYBOARD = yes +SERIAL_DRIVER = usart diff --git a/keyboards/handwired/split65/stm32/stm32.c b/keyboards/handwired/split65/stm32/stm32.c new file mode 100644 index 0000000000..2fa511206e --- /dev/null +++ b/keyboards/handwired/split65/stm32/stm32.c @@ -0,0 +1,16 @@ +/* Copyright 2020-2021 PercyJW-2 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "stm32.h" diff --git a/keyboards/handwired/split65/stm32/stm32.h b/keyboards/handwired/split65/stm32/stm32.h new file mode 100644 index 0000000000..27f03b3e26 --- /dev/null +++ b/keyboards/handwired/split65/stm32/stm32.h @@ -0,0 +1,38 @@ +/* Copyright 2020-2021 PercyJW-2 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "split65.h" + +#define LAYOUT( \ + L00, L01, L02, L03, L04, L05, L06, R07, R06, R05, R04, R03, R02, R01, R00, \ + L10, L11, L12, L13, L14, L15, R17, R16, R15, R14, R13, R12, R11, R10, \ + L20, L21, L22, L23, L24, L25, R47, R27, R26, R25, R24, R23, R22, R21, R20, \ + L30, L31, L32, L33, L34, L35, L36, R37, R36, R35, R34, R33, R32, R31, R30, \ + L40, L41, L42, L43, R46, R45, R44, R43, R42, R41, R40 \ + ) \ + { \ + {L00, L01, L02, L03, L04, L05, L06, KC_NO}, \ + {L10, L11, L12, L13, L14, L15, KC_NO, KC_NO}, \ + {L20, L21, L22, L23, L24, L25, KC_NO, KC_NO}, \ + {L30, L31, L32, L33, L34, L35, L36, KC_NO}, \ + {L40, L41, L42, KC_NO, L43, KC_NO, KC_NO, KC_NO}, \ + {R00, R01, R02, R03, R04, R05, R06, R07}, \ + {R10, R11, R12, R13, R14, R15, R16, R17}, \ + {R20, R21, R22, R23, R24, R25, R26, R27}, \ + {R30, R31, R32, R33, R34, R35, R36, R37}, \ + {R40, R41, R42, R43, R44, R45, R46, R47} \ + } From bedecd3cbcfad07c8ee330bd561c94bc758bda87 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Tue, 12 Oct 2021 01:44:47 +0000 Subject: [PATCH 264/595] Nordic60 layout rework/extension (#14794) --- keyboards/kbnordic/nordic60/info.json | 537 +++++++++++------- .../nordic60/keymaps/default/keymap.c | 30 +- .../nordic60/keymaps/default_ansi/keymap.c | 30 +- keyboards/kbnordic/nordic60/rev_a/rev_a.h | 76 ++- 4 files changed, 437 insertions(+), 236 deletions(-) diff --git a/keyboards/kbnordic/nordic60/info.json b/keyboards/kbnordic/nordic60/info.json index 266e7fde4a..aa5a82a002 100644 --- a/keyboards/kbnordic/nordic60/info.json +++ b/keyboards/kbnordic/nordic60/info.json @@ -3,210 +3,359 @@ "url": "kbnordic.se", "maintainer": "4pplet", "layouts": { - - "LAYOUT_iso": { + "LAYOUT_all": { "layout": [ - { "label": "~", "x": 0, "y": 0 }, - { "label": "!", "x": 1, "y": 0 }, - { "label": "@", "x": 2, "y": 0 }, - { "label": "#", "x": 3, "y": 0 }, - { "label": "$", "x": 4, "y": 0 }, - { "label": "%", "x": 5, "y": 0 }, - { "label": "^", "x": 6, "y": 0 }, - { "label": "&", "x": 7, "y": 0 }, - { "label": "*", "x": 8, "y": 0 }, - { "label": "(", "x": 9, "y": 0 }, - { "label": ")", "x": 10, "y": 0 }, - { "label": "_", "x": 11, "y": 0 }, - { "label": "+", "x": 12, "y": 0 }, - { "label": "Backspace", "w": 2, "x": 13, "y": 0 }, - { "label": "Tab", "w": 1.5, "x": 0, "y": 1 }, - { "label": "Q", "x": 1.5, "y": 1 }, - { "label": "W", "x": 2.5, "y": 1 }, - { "label": "E", "x": 3.5, "y": 1 }, - { "label": "R", "x": 4.5, "y": 1 }, - { "label": "T", "x": 5.5, "y": 1 }, - { "label": "Y", "x": 6.5, "y": 1 }, - { "label": "U", "x": 7.5, "y": 1 }, - { "label": "I", "x": 8.5, "y": 1 }, - { "label": "O", "x": 9.5, "y": 1 }, - { "label": "P", "x": 10.5, "y": 1 }, - { "label": "{", "x": 11.5, "y": 1 }, - { "label": "}", "x": 12.5, "y": 1 }, - { "h": 2, "label": "ISO", "w": 1.25, "x": 13.75, "y": 1 }, - { "label": "Caps Lock", "w": 1.75, "x": 0, "y": 2 }, - { "label": "A", "x": 1.75, "y": 2 }, - { "label": "S", "x": 2.75, "y": 2 }, - { "label": "D", "x": 3.75, "y": 2 }, - { "label": "F", "x": 4.75, "y": 2 }, - { "label": "G", "x": 5.75, "y": 2 }, - { "label": "H", "x": 6.75, "y": 2 }, - { "label": "J", "x": 7.75, "y": 2 }, - { "label": "K", "x": 8.75, "y": 2 }, - { "label": "L", "x": 9.75, "y": 2 }, - { "label": ":", "x": 10.75, "y": 2 }, - { "label": "\"", "x": 11.75, "y": 2 }, - { "label": "ISO", "x": 12.75, "y": 2 }, - { "label": "Shift", "w": 1.25, "x": 0, "y": 3 }, - { "label": "ISO", "x": 1.25, "y": 3 }, - { "label": "Z", "x": 2.25, "y": 3 }, - { "label": "X", "x": 3.25, "y": 3 }, - { "label": "C", "x": 4.25, "y": 3 }, - { "label": "V", "x": 5.25, "y": 3 }, - { "label": "B", "x": 6.25, "y": 3 }, - { "label": "N", "x": 7.25, "y": 3 }, - { "label": "M", "x": 8.25, "y": 3 }, - { "label": "<", "x": 9.25, "y": 3 }, - { "label": ">", "x": 10.25, "y": 3 }, - { "label": "?", "x": 11.25, "y": 3 }, - { "label": "Shift", "w": 1.75, "x": 12.25, "y": 3 }, - { "label": "Fn", "x": 14, "y": 3 }, - { "label": "Ctrl", "w": 1.25, "x": 0, "y": 4 }, - { "label": "Win", "w": 1.25, "x": 1.25, "y": 4 }, - { "label": "Alt", "w": 1.25, "x": 2.5, "y": 4 }, - { "w": 6.25, "x": 3.75, "y": 4 }, - { "label": "Alt", "w": 1.25, "x": 10, "y": 4 }, - { "label": "Win", "w": 1.25, "x": 11.25, "y": 4 }, - { "label": "Menu", "w": 1.25, "x": 12.5, "y": 4 }, - { "label": "Ctrl", "w": 1.25, "x": 13.75, "y": 4 } + {"label":"`~", "x":0, "y":0}, + {"label":"1!", "x":1, "y":0}, + {"label":"2@", "x":2, "y":0}, + {"label":"3#", "x":3, "y":0}, + {"label":"4$", "x":4, "y":0}, + {"label":"5%", "x":5, "y":0}, + {"label":"6^", "x":6, "y":0}, + {"label":"7&", "x":7, "y":0}, + {"label":"8*", "x":8, "y":0}, + {"label":"9(", "x":9, "y":0}, + {"label":"0)", "x":10, "y":0}, + {"label":"-_", "x":11, "y":0}, + {"label":"=+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0}, + {"label":"Backspace", "x":14, "y":0}, + + {"label":"Tab", "w":1.5, "x":0, "y":1}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[{", "x":11.5, "y":1}, + {"label":"]}", "x":12.5, "y":1}, + {"label":"\\|", "w":1.5, "x":13.5, "y":1}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";:", "x":10.75, "y":2}, + {"label":"'\"", "x":11.75, "y":2}, + {"label":"Enter", "x":12.75, "y":2, "w":2.25}, + + {"label":"Shift", "w":1.25, "x":0, "y":3}, + {"label":"\\|", "x":1.25, "y":3}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",<", "x":9.25, "y":3}, + {"label":".>", "x":10.25, "y":3}, + {"label":"/?", "x":11.25, "y":3}, + {"label":"Shift", "w":1.75, "x":12.25, "y":3}, + {"label":"Fn", "x":14, "y":3}, + + {"label":"Ctrl", "w":1.25, "x":0, "y":4}, + {"label":"Win", "w":1.25, "x":1.25, "y":4}, + {"label":"Alt", "w":1.25, "x":2.5, "y":4}, + {"label":"Space", "w":6.25, "x":3.75, "y":4}, + {"label":"Alt", "w":1.25, "x":10, "y":4}, + {"label":"Win", "w":1.25, "x":11.25, "y":4}, + {"label":"Menu", "w":1.25, "x":12.5, "y":4}, + {"label":"Ctrl", "w":1.25, "x":13.75, "y":4} ] }, + "LAYOUT_60_iso": { + "layout": [ + {"label":"`\u00ac", "x":0, "y":0}, + {"label":"1!", "x":1, "y":0}, + {"label":"2\"", "x":2, "y":0}, + {"label":"3\u00a3", "x":3, "y":0}, + {"label":"4$", "x":4, "y":0}, + {"label":"5%", "x":5, "y":0}, + {"label":"6^", "x":6, "y":0}, + {"label":"7&", "x":7, "y":0}, + {"label":"8*", "x":8, "y":0}, + {"label":"9(", "x":9, "y":0}, + {"label":"0)", "x":10, "y":0}, + {"label":"-_", "x":11, "y":0}, + {"label":"=+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0, "w":2}, - "LAYOUT_ansi": { + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[{", "x":11.5, "y":1}, + {"label":"]}", "x":12.5, "y":1}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";:", "x":10.75, "y":2}, + {"label":"'@", "x":11.75, "y":2}, + {"label":"#~", "x":12.75, "y":2}, + {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, + + {"label":"Shift", "x":0, "y":3, "w":1.25}, + {"label":"\\|", "x":1.25, "y":3}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",<", "x":9.25, "y":3}, + {"label":".>", "x":10.25, "y":3}, + {"label":"/?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":2.75}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"Win", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"label":"Space", "x":3.75, "y":4, "w":6.25}, + {"label":"Alt", "x":10, "y":4, "w":1.25}, + {"label":"Win", "x":11.25, "y":4, "w":1.25}, + {"label":"Menu", "x":12.5, "y":4, "w":1.25}, + {"label":"Ctrl", "x":13.75, "y":4, "w":1.25} + ] + }, + "LAYOUT_60_iso_split_bs_rshift": { "layout": [ - { "label": "~", "x": 0, "y": 0 }, - { "label": "!", "x": 1, "y": 0 }, - { "label": "@", "x": 2, "y": 0 }, - { "label": "#", "x": 3, "y": 0 }, - { "label": "$", "x": 4, "y": 0 }, - { "label": "%", "x": 5, "y": 0 }, - { "label": "^", "x": 6, "y": 0 }, - { "label": "&", "x": 7, "y": 0 }, - { "label": "*", "x": 8, "y": 0 }, - { "label": "(", "x": 9, "y": 0 }, - { "label": ")", "x": 10, "y": 0 }, - { "label": "_", "x": 11, "y": 0 }, - { "label": "+", "x": 12, "y": 0 }, - { "label": "Backspace", "w": 2, "x": 13, "y": 0 }, - { "label": "Tab", "w": 1.5, "x": 0, "y": 1 }, - { "label": "Q", "x": 1.5, "y": 1 }, - { "label": "W", "x": 2.5, "y": 1 }, - { "label": "E", "x": 3.5, "y": 1 }, - { "label": "R", "x": 4.5, "y": 1 }, - { "label": "T", "x": 5.5, "y": 1 }, - { "label": "Y", "x": 6.5, "y": 1 }, - { "label": "U", "x": 7.5, "y": 1 }, - { "label": "I", "x": 8.5, "y": 1 }, - { "label": "O", "x": 9.5, "y": 1 }, - { "label": "P", "x": 10.5, "y": 1 }, - { "label": "{", "x": 11.5, "y": 1 }, - { "label": "}", "x": 12.5, "y": 1 }, - { "label": "|", "w": 1.5, "x": 13.5, "y": 1 }, - { "label": "Caps Lock", "w": 1.75, "x": 0, "y": 2 }, - { "label": "A", "x": 1.75, "y": 2 }, - { "label": "S", "x": 2.75, "y": 2 }, - { "label": "D", "x": 3.75, "y": 2 }, - { "label": "F", "x": 4.75, "y": 2 }, - { "label": "G", "x": 5.75, "y": 2 }, - { "label": "H", "x": 6.75, "y": 2 }, - { "label": "J", "x": 7.75, "y": 2 }, - { "label": "K", "x": 8.75, "y": 2 }, - { "label": "L", "x": 9.75, "y": 2 }, - { "label": ":", "x": 10.75, "y": 2 }, - { "label": "\"", "x": 11.75, "y": 2 }, - { "label": "Enter", "w": 2.25, "x": 12.75, "y": 2 }, - { "label": "Shift", "w": 2.25, "x": 0, "y": 3 }, - { "label": "Z", "x": 2.25, "y": 3 }, - { "label": "X", "x": 3.25, "y": 3 }, - { "label": "C", "x": 4.25, "y": 3 }, - { "label": "V", "x": 5.25, "y": 3 }, - { "label": "B", "x": 6.25, "y": 3 }, - { "label": "N", "x": 7.25, "y": 3 }, - { "label": "M", "x": 8.25, "y": 3 }, - { "label": "<", "x": 9.25, "y": 3 }, - { "label": ">", "x": 10.25, "y": 3 }, - { "label": "?", "x": 11.25, "y": 3 }, - { "label": "Shift", "w": 1.75, "x": 12.25, "y": 3 }, - { "label": "Fn", "x": 14, "y": 3 }, - { "label": "Ctrl", "w": 1.25, "x": 0, "y": 4 }, - { "label": "Win", "w": 1.25, "x": 1.25, "y": 4 }, - { "label": "Alt", "w": 1.25, "x": 2.5, "y": 4 }, - { "w": 6.25, "x": 3.75, "y": 4 }, - { "label": "Alt", "w": 1.25, "x": 10, "y": 4 }, - { "label": "Win", "w": 1.25, "x": 11.25, "y": 4 }, - { "label": "Menu", "w": 1.25, "x": 12.5, "y": 4 }, - { "label": "Ctrl", "w": 1.25, "x": 13.75, "y": 4 } + {"label":"`\u00ac", "x":0, "y":0}, + {"label":"1!", "x":1, "y":0}, + {"label":"2\"", "x":2, "y":0}, + {"label":"3\u00a3", "x":3, "y":0}, + {"label":"4$", "x":4, "y":0}, + {"label":"5%", "x":5, "y":0}, + {"label":"6^", "x":6, "y":0}, + {"label":"7&", "x":7, "y":0}, + {"label":"8*", "x":8, "y":0}, + {"label":"9(", "x":9, "y":0}, + {"label":"0)", "x":10, "y":0}, + {"label":"-_", "x":11, "y":0}, + {"label":"=+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0}, + {"label":"Backspace", "x":14, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[{", "x":11.5, "y":1}, + {"label":"]}", "x":12.5, "y":1}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";:", "x":10.75, "y":2}, + {"label":"'@", "x":11.75, "y":2}, + {"label":"#~", "x":12.75, "y":2}, + {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, + + {"label":"Shift", "x":0, "y":3, "w":1.25}, + {"label":"\\|", "x":1.25, "y":3}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",<", "x":9.25, "y":3}, + {"label":".>", "x":10.25, "y":3}, + {"label":"/?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"Fn", "x":14, "y":3}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"Win", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"label":"Space", "x":3.75, "y":4, "w":6.25}, + {"label":"Alt", "x":10, "y":4, "w":1.25}, + {"label":"Win", "x":11.25, "y":4, "w":1.25}, + {"label":"Menu", "x":12.5, "y":4, "w":1.25}, + {"label":"Ctrl", "x":13.75, "y":4, "w":1.25} ] }, - "LAYOUT_all": { + "LAYOUT_60_ansi": { "layout": [ - { "label": "~", "x": 0, "y": 0 }, - { "label": "!", "x": 1, "y": 0 }, - { "label": "@", "x": 2, "y": 0 }, - { "label": "#", "x": 3, "y": 0 }, - { "label": "$", "x": 4, "y": 0 }, - { "label": "%", "x": 5, "y": 0 }, - { "label": "^", "x": 6, "y": 0 }, - { "label": "&", "x": 7, "y": 0 }, - { "label": "*", "x": 8, "y": 0 }, - { "label": "(", "x": 9, "y": 0 }, - { "label": ")", "x": 10, "y": 0 }, - { "label": "_", "x": 11, "y": 0 }, - { "label": "+", "x": 12, "y": 0 }, - { "x": 13, "y": 0 }, - { "x": 14, "y": 0 }, - { "label": "Tab", "w": 1.5, "x": 0, "y": 1 }, - { "label": "Q", "x": 1.5, "y": 1 }, - { "label": "W", "x": 2.5, "y": 1 }, - { "label": "E", "x": 3.5, "y": 1 }, - { "label": "R", "x": 4.5, "y": 1 }, - { "label": "T", "x": 5.5, "y": 1 }, - { "label": "Y", "x": 6.5, "y": 1 }, - { "label": "U", "x": 7.5, "y": 1 }, - { "label": "I", "x": 8.5, "y": 1 }, - { "label": "O", "x": 9.5, "y": 1 }, - { "label": "P", "x": 10.5, "y": 1 }, - { "label": "{", "x": 11.5, "y": 1 }, - { "label": "}", "x": 12.5, "y": 1 }, - { "label": "|", "w": 1.5, "x": 13.5, "y": 1 }, - { "label": "Caps Lock", "w": 1.75, "x": 0, "y": 2 }, - { "label": "A", "x": 1.75, "y": 2 }, - { "label": "S", "x": 2.75, "y": 2 }, - { "label": "D", "x": 3.75, "y": 2 }, - { "label": "F", "x": 4.75, "y": 2 }, - { "label": "G", "x": 5.75, "y": 2 }, - { "label": "H", "x": 6.75, "y": 2 }, - { "label": "J", "x": 7.75, "y": 2 }, - { "label": "K", "x": 8.75, "y": 2 }, - { "label": "L", "x": 9.75, "y": 2 }, - { "label": ":", "x": 10.75, "y": 2 }, - { "label": "\"", "x": 11.75, "y": 2 }, - { "label": "Enter", "w": 2.25, "x": 12.75, "y": 2 }, - { "label": "Shift", "w": 1.25, "x": 0, "y": 3 }, - { "label": "ISO", "x": 1.25, "y": 3 }, - { "label": "Z", "x": 2.25, "y": 3 }, - { "label": "X", "x": 3.25, "y": 3 }, - { "label": "C", "x": 4.25, "y": 3 }, - { "label": "V", "x": 5.25, "y": 3 }, - { "label": "B", "x": 6.25, "y": 3 }, - { "label": "N", "x": 7.25, "y": 3 }, - { "label": "M", "x": 8.25, "y": 3 }, - { "label": "<", "x": 9.25, "y": 3 }, - { "label": ">", "x": 10.25, "y": 3 }, - { "label": "?", "x": 11.25, "y": 3 }, - { "label": "Shift", "w": 1.75, "x": 12.25, "y": 3 }, - { "label": "Fn", "x": 14, "y": 3 }, - { "label": "Ctrl", "w": 1.25, "x": 0, "y": 4 }, - { "label": "Win", "w": 1.25, "x": 1.25, "y": 4 }, - { "label": "Alt", "w": 1.25, "x": 2.5, "y": 4 }, - { "w": 6.25, "x": 3.75, "y": 4 }, - { "label": "Alt", "w": 1.25, "x": 10, "y": 4 }, - { "label": "Win", "w": 1.25, "x": 11.25, "y": 4 }, - { "label": "Menu", "w": 1.25, "x": 12.5, "y": 4 }, - { "label": "Ctrl", "w": 1.25, "x": 13.75, "y": 4 } + {"label":"`~", "x":0, "y":0}, + {"label":"1!", "x":1, "y":0}, + {"label":"2@", "x":2, "y":0}, + {"label":"3#", "x":3, "y":0}, + {"label":"4$", "x":4, "y":0}, + {"label":"5%", "x":5, "y":0}, + {"label":"6^", "x":6, "y":0}, + {"label":"7&", "x":7, "y":0}, + {"label":"8*", "x":8, "y":0}, + {"label":"9(", "x":9, "y":0}, + {"label":"0)", "x":10, "y":0}, + {"label":"-_", "x":11, "y":0}, + {"label":"=+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0, "w":2}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[{", "x":11.5, "y":1}, + {"label":"]}", "x":12.5, "y":1}, + {"label":"\\|", "x":13.5, "y":1, "w":1.5}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";:", "x":10.75, "y":2}, + {"label":"'\"", "x":11.75, "y":2}, + {"label":"Enter", "x":12.75, "y":2, "w":2.25}, + + {"label":"Shift", "x":0, "y":3, "w":2.25}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",<", "x":9.25, "y":3}, + {"label":".>", "x":10.25, "y":3}, + {"label":"/?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":2.75}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"Win", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"label":"Space", "x":3.75, "y":4, "w":6.25}, + {"label":"Alt", "x":10, "y":4, "w":1.25}, + {"label":"Win", "x":11.25, "y":4, "w":1.25}, + {"label":"Menu", "x":12.5, "y":4, "w":1.25}, + {"label":"Ctrl", "x":13.75, "y":4, "w":1.25} ] - } + }, + "LAYOUT_60_ansi_split_bs_rshift": { + "layout": [ + {"label":"`~", "x":0, "y":0}, + {"label":"1!", "x":1, "y":0}, + {"label":"2@", "x":2, "y":0}, + {"label":"3#", "x":3, "y":0}, + {"label":"4$", "x":4, "y":0}, + {"label":"5%", "x":5, "y":0}, + {"label":"6^", "x":6, "y":0}, + {"label":"7&", "x":7, "y":0}, + {"label":"8*", "x":8, "y":0}, + {"label":"9(", "x":9, "y":0}, + {"label":"0)", "x":10, "y":0}, + {"label":"-_", "x":11, "y":0}, + {"label":"=+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0}, + {"label":"Backspace", "x":14, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[{", "x":11.5, "y":1}, + {"label":"]}", "x":12.5, "y":1}, + {"label":"\\|", "x":13.5, "y":1, "w":1.5}, + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";:", "x":10.75, "y":2}, + {"label":"'\"", "x":11.75, "y":2}, + {"label":"Enter", "x":12.75, "y":2, "w":2.25}, + {"label":"Shift", "x":0, "y":3, "w":2.25}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",<", "x":9.25, "y":3}, + {"label":".>", "x":10.25, "y":3}, + {"label":"/?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"Fn", "x":14, "y":3}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"Win", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"label":"Space", "x":3.75, "y":4, "w":6.25}, + {"label":"Alt", "x":10, "y":4, "w":1.25}, + {"label":"Win", "x":11.25, "y":4, "w":1.25}, + {"label":"Menu", "x":12.5, "y":4, "w":1.25}, + {"label":"Ctrl", "x":13.75, "y":4, "w":1.25} + ] + } } } diff --git a/keyboards/kbnordic/nordic60/keymaps/default/keymap.c b/keyboards/kbnordic/nordic60/keymaps/default/keymap.c index 715fdaacad..0776088335 100644 --- a/keyboards/kbnordic/nordic60/keymaps/default/keymap.c +++ b/keyboards/kbnordic/nordic60/keymaps/default/keymap.c @@ -17,18 +17,20 @@ along with this program. If not, see . #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -// main layer -[0] = LAYOUT_iso( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_ENT, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL), -// basic function layer -[1] = LAYOUT_iso( - RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, - KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) + // main layer + [0] = LAYOUT_60_iso_split_bs_rshift( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL + ), + // basic function layer + [1] = LAYOUT_60_iso_split_bs_rshift( + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) }; diff --git a/keyboards/kbnordic/nordic60/keymaps/default_ansi/keymap.c b/keyboards/kbnordic/nordic60/keymaps/default_ansi/keymap.c index 1ebde8e180..21b2249f74 100644 --- a/keyboards/kbnordic/nordic60/keymaps/default_ansi/keymap.c +++ b/keyboards/kbnordic/nordic60/keymaps/default_ansi/keymap.c @@ -17,18 +17,20 @@ along with this program. If not, see . #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -// main layer -[0] = LAYOUT_ansi( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL), -// basic function layer -[1] = LAYOUT_ansi( - RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, - KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) + // main layer + [0] = LAYOUT_60_ansi( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL + ), + // basic function layer + [1] = LAYOUT_60_ansi( + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, + KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) }; diff --git a/keyboards/kbnordic/nordic60/rev_a/rev_a.h b/keyboards/kbnordic/nordic60/rev_a/rev_a.h index 9b925efaac..25599a33c5 100644 --- a/keyboards/kbnordic/nordic60/rev_a/rev_a.h +++ b/keyboards/kbnordic/nordic60/rev_a/rev_a.h @@ -18,6 +18,24 @@ along with this program. If not, see . #include "quantum.h" +#define XXX KC_NO + +/* ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ ┌───────┐ + * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0d │1d │ │1d │ 2u Backspace + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤ └─┬─────┤ + * │10 │11 │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │2c │ │ │ + * 2.25u ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ ┌──┴┐2d │ ISO Enter + * LShift │20 │21 │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2d │ │2c │ │ + * ┌────────┐ ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤ ┌─┴───┴────┤ + * │30 │ │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3c │3d │ │3c │ 2.75u RShift + * └────────┘ ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬┴───┤ └──────────┘ + * │40 │41 │42 │46 │4a │4b │4c │4d │ + * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ + * ┌─────┬───┬─────┬───────────────────────────┬─────┬───┬─────┐ + * │40 │41 │42 │46 │4b │4c │4d │ Tsangan/WKL + * └─────┴───┴─────┴───────────────────────────┴─────┴───┴─────┘ + */ + #define LAYOUT_all( \ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k1d, \ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k2c, \ @@ -30,35 +48,65 @@ along with this program. If not, see . {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \ {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \ {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \ - {k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO, KC_NO, KC_NO, k4a, k4b, k4c, k4d}, \ + {k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, k4a, k4b, k4c, k4d}, \ } -#define LAYOUT_iso( \ +#define LAYOUT_60_iso( \ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k1d, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k2d, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \ + k40, k41, k42, k46, k4a, k4b, k4c, k4d \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, XXX}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \ + {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, XXX}, \ + {k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, k4a, k4b, k4c, k4d}, \ +} + +#define LAYOUT_60_iso_split_bs_rshift( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k1d, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \ - k40, k41, k42, k46, k4a, k4b, k4c, k4d \ + k40, k41, k42, k46, k4a, k4b, k4c, k4d \ ) \ { \ - {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, KC_NO}, \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \ {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \ {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \ {k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \ - {k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO, KC_NO, KC_NO, k4a, k4b, k4c, k4d}, \ + {k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, k4a, k4b, k4c, k4d}, \ } -#define LAYOUT_ansi( \ +#define LAYOUT_60_ansi( \ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k1d, \ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k2c, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \ - k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \ - k40, k41, k42, k46, k4a, k4b, k4c, k4d \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, \ + k40, k41, k42, k46, k4a, k4b, k4c, k4d \ ) \ { \ - {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, KC_NO}, \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, XXX}, \ + {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \ + {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \ + {k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, XXX}, \ + {k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, k4a, k4b, k4c, k4d}, \ +} + +#define LAYOUT_60_ansi_split_bs_rshift( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k1d, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k2c, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2d, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d, \ + k40, k41, k42, k46, k4a, k4b, k4c, k4d \ +) \ +{ \ + {k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d}, \ {k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d}, \ {k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d}, \ - {k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \ - {k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO, KC_NO, KC_NO, k4a, k4b, k4c, k4d}, \ + {k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3c, k3d}, \ + {k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, k4a, k4b, k4c, k4d}, \ } From 25eac95348548b41f4bf4e8a02fc8bace270bd35 Mon Sep 17 00:00:00 2001 From: kb-elmo Date: Tue, 12 Oct 2021 04:25:28 +0200 Subject: [PATCH 265/595] [Keyboard] Add ISOlation and some kb-elmo keyboard updates (#14656) Co-authored-by: Drashna Jaelre --- keyboards/kb_elmo/isolation/config.h | 62 +++++++++++++++++++ keyboards/kb_elmo/isolation/info.json | 12 ++++ keyboards/kb_elmo/isolation/isolation.c | 17 +++++ keyboards/kb_elmo/isolation/isolation.h | 25 ++++++++ .../isolation/keymaps/default/keymap.c | 22 +++++++ keyboards/kb_elmo/isolation/readme.md | 24 +++++++ keyboards/kb_elmo/isolation/rules.mk | 24 +++++++ keyboards/kb_elmo/qez/qez.h | 2 +- keyboards/kb_elmo/sesame/readme.md | 15 ++++- keyboards/kb_elmo/twelvekey/readme.md | 7 ++- 10 files changed, 205 insertions(+), 5 deletions(-) create mode 100644 keyboards/kb_elmo/isolation/config.h create mode 100644 keyboards/kb_elmo/isolation/info.json create mode 100644 keyboards/kb_elmo/isolation/isolation.c create mode 100644 keyboards/kb_elmo/isolation/isolation.h create mode 100644 keyboards/kb_elmo/isolation/keymaps/default/keymap.c create mode 100644 keyboards/kb_elmo/isolation/readme.md create mode 100644 keyboards/kb_elmo/isolation/rules.mk diff --git a/keyboards/kb_elmo/isolation/config.h b/keyboards/kb_elmo/isolation/config.h new file mode 100644 index 0000000000..3d32efbcb4 --- /dev/null +++ b/keyboards/kb_elmo/isolation/config.h @@ -0,0 +1,62 @@ +/* +Copyright 2021 kb-elmo + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xA68C +#define PRODUCT_ID 0x4EE6 +#define DEVICE_VER 0x0001 +#define MANUFACTURER kb-elmo +#define PRODUCT ISOlation + +/* key matrix size */ +#define MATRIX_ROWS 1 +#define MATRIX_COLS 1 + +/* direct key pin */ +#define DIRECT_PINS {{ B0 }} +#define UNUSED_PINS + +/* RGB backlight */ +#define RGB_DI_PIN B2 +#ifdef RGB_DI_PIN +# define RGBLED_NUM 3 +# define RGBLIGHT_HUE_STEP 8 +# define RGBLIGHT_SAT_STEP 8 +# define RGBLIGHT_VAL_STEP 8 +# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +# define RGBLIGHT_EFFECT_BREATHING +# define RGBLIGHT_EFFECT_RAINBOW_MOOD +# define RGBLIGHT_EFFECT_RAINBOW_SWIRL +# define RGBLIGHT_EFFECT_KNIGHT +# define RGBLIGHT_EFFECT_CHRISTMAS +# define RGBLIGHT_EFFECT_STATIC_GRADIENT +# define RGBLIGHT_EFFECT_RGB_TEST +# define RGBLIGHT_EFFECT_ALTERNATING +# define RGBLIGHT_EFFECT_TWINKLE +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION diff --git a/keyboards/kb_elmo/isolation/info.json b/keyboards/kb_elmo/isolation/info.json new file mode 100644 index 0000000000..1cca4610d7 --- /dev/null +++ b/keyboards/kb_elmo/isolation/info.json @@ -0,0 +1,12 @@ +{ + "keyboard_name": "isolation", + "url": "", + "maintainer": "kb-elmo", + "layouts": { + "LAYOUT": { + "layout": [ + {"x":0.25, "y":0, "w":1.25, "h":2} + ] + } + } +} diff --git a/keyboards/kb_elmo/isolation/isolation.c b/keyboards/kb_elmo/isolation/isolation.c new file mode 100644 index 0000000000..09b8c95541 --- /dev/null +++ b/keyboards/kb_elmo/isolation/isolation.c @@ -0,0 +1,17 @@ +/* Copyright 2021 kb-elmo + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "isolation.h" diff --git a/keyboards/kb_elmo/isolation/isolation.h b/keyboards/kb_elmo/isolation/isolation.h new file mode 100644 index 0000000000..580189ea25 --- /dev/null +++ b/keyboards/kb_elmo/isolation/isolation.h @@ -0,0 +1,25 @@ +/* Copyright 2021 kb-elmo + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +#define LAYOUT( \ + k00 \ +) { \ + { k00 } \ +} diff --git a/keyboards/kb_elmo/isolation/keymaps/default/keymap.c b/keyboards/kb_elmo/isolation/keymaps/default/keymap.c new file mode 100644 index 0000000000..9cfa21e9a4 --- /dev/null +++ b/keyboards/kb_elmo/isolation/keymaps/default/keymap.c @@ -0,0 +1,22 @@ +/* Copyright 2021 kb-elmo + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( + KC_ENT + ) +}; diff --git a/keyboards/kb_elmo/isolation/readme.md b/keyboards/kb_elmo/isolation/readme.md new file mode 100644 index 0000000000..610c26a590 --- /dev/null +++ b/keyboards/kb_elmo/isolation/readme.md @@ -0,0 +1,24 @@ +# ISOlation + +![isolation](https://i.imgur.com/Pe1tWzJl.jpg) + +A seamless ISO single-key "macropad" + +* Keyboard Maintainer: [kb-elmo](https://github.com/kb-elmo) +* Hardware Supported: ISOlation RGB PCB +* Hardware Availability: [Open source project](https://github.com/kb-elmo/ISOlation) + +Make example for this keyboard (after setting up your build environment): + + make kb_elmo/isolation:default + +Flashing example for this keyboard: + + make kb_elmo/isolation:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +* **Bootmagic reset**: Hold down the enter key and plug in the keyboard +* **Bootloader pins**: Short the two pins labeled "BOOT" while plugging the board \ No newline at end of file diff --git a/keyboards/kb_elmo/isolation/rules.mk b/keyboards/kb_elmo/isolation/rules.mk new file mode 100644 index 0000000000..9602f01bcc --- /dev/null +++ b/keyboards/kb_elmo/isolation/rules.mk @@ -0,0 +1,24 @@ +# MCU name +MCU = atmega328p + +# Processor frequency +F_CPU = 16000000 + +# Bootloader selection +BOOTLOADER = usbasploader + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/kb_elmo/qez/qez.h b/keyboards/kb_elmo/qez/qez.h index 1bf9cde248..0a3e2c0a7e 100644 --- a/keyboards/kb_elmo/qez/qez.h +++ b/keyboards/kb_elmo/qez/qez.h @@ -53,5 +53,5 @@ { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09 }, \ { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19 }, \ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29 }, \ - { ___, k31, k32, ___, ___, k35, ___, k37, k38, k39 } \ + { ___, k31, ___, ___, ___, k35, ___, ___, k38, k39 } \ } diff --git a/keyboards/kb_elmo/sesame/readme.md b/keyboards/kb_elmo/sesame/readme.md index 9fa7f3541c..c0211cfde4 100644 --- a/keyboards/kb_elmo/sesame/readme.md +++ b/keyboards/kb_elmo/sesame/readme.md @@ -1,15 +1,24 @@ # Sesame -![sesame](https://i.imgur.com/IdudbWjl.jpg) +![sesame](https://i.imgur.com/DNQMl8hl.jpg) Alice layout THT keyboard * Keyboard Maintainer: [kb-elmo](https://github.com/kb-elmo) -* Hardware Supported: Sesame -* Hardware Availability: [Project is open source](https://github.com/kb-elmo/sesame) +* Hardware Supported: Sesame PCB rev.1 and rev.2 +* Hardware Availability: [Open source project](https://github.com/kb-elmo/sesame) Make example for this keyboard (after setting up your build environment): make kb_elmo/sesame:default +Flashing example for this keyboard: + + make kb_elmo/sesame:default:flash + See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +* **Bootmagic reset**: Hold down the top left key and plug in the keyboard +* **Physical reset button**: Hold down the button labeled "BOOT" and briefly press the button labeled "RESET" on the back of the PCB \ No newline at end of file diff --git a/keyboards/kb_elmo/twelvekey/readme.md b/keyboards/kb_elmo/twelvekey/readme.md index db24063783..ab256d0470 100644 --- a/keyboards/kb_elmo/twelvekey/readme.md +++ b/keyboards/kb_elmo/twelvekey/readme.md @@ -1,6 +1,6 @@ # Twelvekey -![twelvekey](https://i.imgur.com/xBQIvpml.png) +![twelvekey](https://i.imgur.com/59sSO8kl.jpg) Simple 12-key macropad @@ -17,3 +17,8 @@ Flashing example for this keyboard: make kb_elmo/twelvekey:default:flash See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +* **Bootmagic reset**: Hold down the top left key and plug in the keyboard +* **Physical reset button**: Hold down the button labeled "BOOT" and briefly press the button labeled "RESET" on the back of the PCB From 4b2866dd96545bd11d5b4ae977080b60948850f5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Reibl=20J=C3=A1nos=20D=C3=A1niel?= Date: Tue, 12 Oct 2021 04:26:47 +0200 Subject: [PATCH 266/595] [Keymap] Add workman layout (#14792) --- layouts/community/ortho_5x12/riblee/keymap.c | 41 +++++++++++++++----- users/riblee/riblee.c | 6 +++ users/riblee/riblee.h | 2 + 3 files changed, 39 insertions(+), 10 deletions(-) diff --git a/layouts/community/ortho_5x12/riblee/keymap.c b/layouts/community/ortho_5x12/riblee/keymap.c index eb5f1af807..b34217bff4 100644 --- a/layouts/community/ortho_5x12/riblee/keymap.c +++ b/layouts/community/ortho_5x12/riblee/keymap.c @@ -84,17 +84,17 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |------+------+------+------+------+-------------+------+------+------+------+------| * | Esc | A | R | S | T | D | H | N | E | I | O | " | * |------+------+------+------+------+------|------+------+------+------+------+------| - * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * | Shift| Z | X | C | V | B | K | M | , | . | Up |Enter | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | / | Left | Down |Right | * `-----------------------------------------------------------------------------------' */ [_COLEMAK] = LAYOUT_ortho_5x12( KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_DEL, KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, - BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_UP, KC_ENT, + BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_SLSH, KC_LEFT, KC_DOWN, KC_RGHT ), /* Dvorak @@ -118,6 +118,27 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT ), +/* Workman + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Tab | Q | D | R | W | B | J | F | U | P | ; | Del | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Esc | A | S | H | T | G | Y | N | E | O | I | ' | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Shift| Z | X | M | C | V | K | L | , | . | Up |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | / | Left | Down |Right | + * `-----------------------------------------------------------------------------------' + */ +[_WORKMAN] = LAYOUT_ortho_5x12( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_TAB, KC_Q, KC_D, KC_R, KC_W, KC_B, KC_J, KC_F, KC_U, KC_P, KC_SCLN, KC_DEL, + KC_ESC, KC_A, KC_S, KC_H, KC_T, KC_G, KC_Y, KC_N, KC_E, KC_O, KC_I, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_M, KC_C, KC_V, KC_K, KC_L, KC_COMM, KC_DOT, KC_UP, KC_ENT, + BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_SLSH, KC_LEFT, KC_DOWN, KC_RGHT +), + /* Lower * ,-----------------------------------------------------------------------------------. * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | @@ -126,7 +147,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |------+------+------+------+------+-------------+------+------+------+------+------| * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | F7 | F8 | F9 | F10 | F11 | F12 | | Home | End | MS_U | BTN2 | + * | | F7 | F8 | F9 | F10 | F11 | F12 | Ins | Home | End | MS_U | BTN2 | * |------+------+------+------+------+------+------+------+------+------+------+------| * | | | | | | BTN1 | BTN2 | | BTN1 | MS_L | MS_D | MS_R | * `-----------------------------------------------------------------------------------' @@ -135,7 +156,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LBRC, KC_RBRC, KC_DEL, KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, - _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_HOME, KC_END, KC_MS_U, KC_BTN2, + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_HOME, KC_END, KC_MS_U, KC_BTN2, _______, _______, _______, _______, _______, KC_BTN1, KC_BTN2, _______, KC_BTN1, KC_MS_L, KC_MS_D, KC_MS_R ), @@ -164,9 +185,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * ,-----------------------------------------------------------------------------------. * | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | * |------+------+------+------+------+------+------+------+------+------+------+------| - * | |Reset |Debug | | | | | | | | | Del | + * | |Reset |Debug | | | | | | | Ins |Prt sc| Del | * |------+------+------+------+------+-------------+------+------+------+------+------| - * | | |Mu mod|Aud on|AudOff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| HUN | | + * | | |Mu mod|Aud on|AudOff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| HUN |Wrkmn | * |------+------+------+------+------+------|------+------+------+------+------+------| * | | | | | | | NKRO | Swap |Un swp|UC Mod| | | * |------+------+------+------+------+------+------+------+------+------+------+------| @@ -175,8 +196,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_ADJUST] = LAYOUT_ortho_5x12( KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, - _______, RESET, DEBUG, _______, _______, _______, _______, TERM_ON, TERM_OFF,_______, _______, KC_DEL, - _______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, HUNGARIAN, _______, + _______, RESET, DEBUG, _______, _______, _______, _______, TERM_ON, TERM_OFF,KC_INS, KC_PSCR, KC_DEL, + _______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, HUNGARIAN, WORKMAN, _______, _______, _______, _______, _______, _______, NK_TOGG, LCG_SWP, LCG_NRM, UC_MOD, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) diff --git a/users/riblee/riblee.c b/users/riblee/riblee.c index 6e6a7c23c6..4bfa298c4a 100644 --- a/users/riblee/riblee.c +++ b/users/riblee/riblee.c @@ -152,6 +152,12 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } return false; break; + case WORKMAN: + if (record->event.pressed) { + set_single_persistent_default_layer(_WORKMAN); + } + return false; + break; case HUNGARIAN: if (record->event.pressed) { set_single_persistent_default_layer(_HUNGARIAN); diff --git a/users/riblee/riblee.h b/users/riblee/riblee.h index a4038765a6..f7340d50b2 100644 --- a/users/riblee/riblee.h +++ b/users/riblee/riblee.h @@ -23,6 +23,7 @@ enum layer_names { _HUNGARIAN, _COLEMAK, _DVORAK, + _WORKMAN, _LOWER, _RAISE, _ADJUST @@ -33,6 +34,7 @@ enum custom_keycodes { HUNGARIAN, COLEMAK, DVORAK, + WORKMAN, BACKLIT }; From 78509658e6b76a843dab82e873421e942f7c076f Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Tue, 12 Oct 2021 02:40:29 +0000 Subject: [PATCH 267/595] KabeDon98E Refactor (#14778) Co-authored-by: Joel Challis --- keyboards/kabedon/kabedon98e/info.json | 215 +++++++++--------- keyboards/kabedon/kabedon98e/kabedon98e.c | 39 ++++ keyboards/kabedon/kabedon98e/kabedon98e.h | 59 +++-- .../kabedon98e/keymaps/default/keymap.c | 73 ++---- .../kabedon/kabedon98e/keymaps/via/keymap.c | 73 ++---- 5 files changed, 225 insertions(+), 234 deletions(-) diff --git a/keyboards/kabedon/kabedon98e/info.json b/keyboards/kabedon/kabedon98e/info.json index 1f7ecf586f..de8f975b2d 100644 --- a/keyboards/kabedon/kabedon98e/info.json +++ b/keyboards/kabedon/kabedon98e/info.json @@ -1,112 +1,117 @@ { - "keyboard_name": "KabeDon98E", - "url": "", - "maintainer": "370490639", + "keyboard_name": "KabeDon98E", + "url": "", + "maintainer": "370490639", "layouts": { "LAYOUT": { "layout": [ - {"label":"Esc", "x":0, "y":0}, - {"label":"F1", "x":1.5, "y":0}, - {"label":"F2", "x":2.5, "y":0}, - {"label":"F3", "x":3.5, "y":0}, - {"label":"F4", "x":4.5, "y":0}, - {"label":"F5", "x":6.25, "y":0}, - {"label":"F6", "x":7.25, "y":0}, - {"label":"F7", "x":8.25, "y":0}, - {"label":"F8", "x":9.25, "y":0}, - {"label":"F9", "x":11, "y":0}, - {"label":"F10", "x":12, "y":0}, - {"label":"F11", "x":13, "y":0}, - {"label":"F12", "x":14, "y":0}, - {"label":"Delete", "x":15.5, "y":0}, - {"label":"Insert", "x":17, "y":0}, - {"label":"Mute", "x":18.5, "y":0}, - {"label":"~", "x":0, "y":1.5}, - {"label":"!", "x":1, "y":1.5}, - {"label":"@", "x":2, "y":1.5}, - {"label":"#", "x":3, "y":1.5}, - {"label":"$", "x":4, "y":1.5}, - {"label":"%", "x":5, "y":1.5}, - {"label":"^", "x":6, "y":1.5}, - {"label":"&", "x":7, "y":1.5}, - {"label":"*", "x":8, "y":1.5}, - {"label":"(", "x":9, "y":1.5}, - {"label":")", "x":10, "y":1.5}, - {"label":"_", "x":11, "y":1.5}, - {"label":"+", "x":12, "y":1.5}, - {"label":"Backspace", "x":13, "y":1.5, "w":2}, - {"label":"Num Lock", "x":15.4, "y":1.5}, - {"label":"/", "x":16.4, "y":1.5}, - {"label":"*", "x":17.4, "y":1.5}, - {"label":"-", "x":18.4, "y":1.5}, - {"label":"Home", "x":19.8, "y":1.5}, - {"label":"Tab", "x":0, "y":2.5, "w":1.5}, - {"label":"Q", "x":1.5, "y":2.5}, - {"label":"W", "x":2.5, "y":2.5}, - {"label":"E", "x":3.5, "y":2.5}, - {"label":"R", "x":4.5, "y":2.5}, - {"label":"T", "x":5.5, "y":2.5}, - {"label":"Y", "x":6.5, "y":2.5}, - {"label":"U", "x":7.5, "y":2.5}, - {"label":"I", "x":8.5, "y":2.5}, - {"label":"O", "x":9.5, "y":2.5}, - {"label":"P", "x":10.5, "y":2.5}, - {"label":"{", "x":11.5, "y":2.5}, - {"label":"}", "x":12.5, "y":2.5}, - {"label":"|", "x":13.5, "y":2.5, "w":1.5}, - {"label":"7", "x":15.4, "y":2.5}, - {"label":"8", "x":16.4, "y":2.5}, - {"label":"9", "x":17.4, "y":2.5}, - {"label":"+", "x":18.4, "y":2.5, "h":2}, - {"label":"End", "x":19.8, "y":2.5}, - {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, - {"label":"A", "x":1.75, "y":3.5}, - {"label":"S", "x":2.75, "y":3.5}, - {"label":"D", "x":3.75, "y":3.5}, - {"label":"F", "x":4.75, "y":3.5}, - {"label":"G", "x":5.75, "y":3.5}, - {"label":"H", "x":6.75, "y":3.5}, - {"label":"J", "x":7.75, "y":3.5}, - {"label":"K", "x":8.75, "y":3.5}, - {"label":"L", "x":9.75, "y":3.5}, - {"label":":", "x":10.75, "y":3.5}, - {"label":"\"", "x":11.75, "y":3.5}, - {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, - {"label":"4", "x":15.4, "y":3.5}, - {"label":"5", "x":16.4, "y":3.5}, - {"label":"6", "x":17.4, "y":3.5}, - {"label":"Shift", "x":0, "y":4.5, "w":2.25}, - {"label":"Z", "x":2.25, "y":4.5}, - {"label":"X", "x":3.25, "y":4.5}, - {"label":"C", "x":4.25, "y":4.5}, - {"label":"V", "x":5.25, "y":4.5}, - {"label":"B", "x":6.25, "y":4.5}, - {"label":"N", "x":7.25, "y":4.5}, - {"label":"M", "x":8.25, "y":4.5}, - {"label":"<", "x":9.25, "y":4.5}, - {"label":">", "x":10.25, "y":4.5}, - {"label":"?", "x":11.25, "y":4.5}, - {"label":"Shift", "x":12.25, "y":4.5, "w":1.75}, - {"label":"Up", "x":14.2, "y":4.7}, - {"label":"1", "x":15.4, "y":4.5}, - {"label":"2", "x":16.4, "y":4.5}, - {"label":"3", "x":17.4, "y":4.5}, - {"label":"Enter", "x":18.4, "y":4.5, "h":2}, - {"label":"Pgup", "x":19.8, "y":4.5}, - {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, - {"label":"Win", "x":1.25, "y":5.5}, - {"label":"Alt", "x":2.25, "y":5.5}, - {"label":"MO(1)", "x":3.25, "y":5.5}, - {"label":"Space", "x":4.25, "y":5.5, "w":6.25}, - {"label":"Alt", "x":10.5, "y":5.5, "w":1.25}, - {"label":"Ctrl", "x":11.75, "y":5.5, "w":1.25}, - {"label":"Left", "x":13.2, "y":5.7}, - {"label":"Down", "x":14.2, "y":5.7}, - {"label":"Right", "x":15.2, "y":5.7}, - {"label":"0", "x":16.4, "y":5.5}, - {"label":".", "x":17.4, "y":5.5}, - {"label":"Pgdn", "x":19.8, "y":5.5} - ] + {"label":"Esc", "x":0, "y":0.5}, + {"label":"F1", "x":1.667, "y":0.5}, + {"label":"F2", "x":2.667, "y":0.5}, + {"label":"F3", "x":3.667, "y":0.5}, + {"label":"F4", "x":4.667, "y":0.5}, + {"label":"F5", "x":6.333, "y":0.5}, + {"label":"F6", "x":7.333, "y":0.5}, + {"label":"F7", "x":8.333, "y":0.5}, + {"label":"F8", "x":9.333, "y":0.5}, + {"label":"F9", "x":11.0, "y":0.5}, + {"label":"F10", "x":12.0, "y":0.5}, + {"label":"F11", "x":13.0, "y":0.5}, + {"label":"F12", "x":14.0, "y":0.5}, + {"label":"Delete", "x":15.5, "y":0.5}, + {"label":"Home", "x":16.9, "y":0, "w":0.6, "h":0.5}, + {"label":"Insert", "x":17.0, "y":0.5}, + {"label":"End", "x":17.5, "y":0, "w":0.6, "h":0.5}, + {"label":"PgUp", "x":18.4, "y":0, "w":0.6, "h":0.5}, + {"label":"Mute", "x":18.5, "y":0.5}, + {"label":"PgDn", "x":19, "y":0, "w":0.6, "h":0.5}, + + {"label":"~", "x":0, "y":1.75}, + {"label":"!", "x":1, "y":1.75}, + {"label":"@", "x":2, "y":1.75}, + {"label":"#", "x":3, "y":1.75}, + {"label":"$", "x":4, "y":1.75}, + {"label":"%", "x":5, "y":1.75}, + {"label":"^", "x":6, "y":1.75}, + {"label":"&", "x":7, "y":1.75}, + {"label":"*", "x":8, "y":1.75}, + {"label":"(", "x":9, "y":1.75}, + {"label":")", "x":10, "y":1.75}, + {"label":"_", "x":11, "y":1.75}, + {"label":"+", "x":12, "y":1.75}, + {"label":"Backspace", "x":13, "y":1.75, "w":2}, + {"label":"Num Lock", "x":15.5, "y":1.75}, + {"label":"/", "x":16.5, "y":1.75}, + {"label":"*", "x":17.5, "y":1.75}, + {"label":"-", "x":18.5, "y":1.75}, + + {"label":"Tab", "x":0, "y":2.75, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.75}, + {"label":"W", "x":2.5, "y":2.75}, + {"label":"E", "x":3.5, "y":2.75}, + {"label":"R", "x":4.5, "y":2.75}, + {"label":"T", "x":5.5, "y":2.75}, + {"label":"Y", "x":6.5, "y":2.75}, + {"label":"U", "x":7.5, "y":2.75}, + {"label":"I", "x":8.5, "y":2.75}, + {"label":"O", "x":9.5, "y":2.75}, + {"label":"P", "x":10.5, "y":2.75}, + {"label":"{", "x":11.5, "y":2.75}, + {"label":"}", "x":12.5, "y":2.75}, + {"label":"|", "x":13.5, "y":2.75, "w":1.5}, + {"label":"7", "x":15.5, "y":2.75}, + {"label":"8", "x":16.5, "y":2.75}, + {"label":"9", "x":17.5, "y":2.75}, + + {"label":"Caps Lock", "x":0, "y":3.75, "w":1.75}, + {"label":"A", "x":1.75, "y":3.75}, + {"label":"S", "x":2.75, "y":3.75}, + {"label":"D", "x":3.75, "y":3.75}, + {"label":"F", "x":4.75, "y":3.75}, + {"label":"G", "x":5.75, "y":3.75}, + {"label":"H", "x":6.75, "y":3.75}, + {"label":"J", "x":7.75, "y":3.75}, + {"label":"K", "x":8.75, "y":3.75}, + {"label":"L", "x":9.75, "y":3.75}, + {"label":":", "x":10.75, "y":3.75}, + {"label":"\"", "x":11.75, "y":3.75}, + {"label":"Enter", "x":12.75, "y":3.75, "w":2.25}, + {"label":"4", "x":15.5, "y":3.75}, + {"label":"5", "x":16.5, "y":3.75}, + {"label":"6", "x":17.5, "y":3.75}, + {"label":"+", "x":18.5, "y":2.75, "h":2}, + + {"label":"Shift", "x":0, "y":4.75, "w":2.25}, + {"label":"Z", "x":2.25, "y":4.75}, + {"label":"X", "x":3.25, "y":4.75}, + {"label":"C", "x":4.25, "y":4.75}, + {"label":"V", "x":5.25, "y":4.75}, + {"label":"B", "x":6.25, "y":4.75}, + {"label":"N", "x":7.25, "y":4.75}, + {"label":"M", "x":8.25, "y":4.75}, + {"label":"<", "x":9.25, "y":4.75}, + {"label":">", "x":10.25, "y":4.75}, + {"label":"?", "x":11.25, "y":4.75}, + {"label":"Shift", "x":12.25, "y":4.75, "w":1.75}, + {"label":"\u2191", "x":14.25, "y":5}, + {"label":"1", "x":15.5, "y":4.75}, + {"label":"2", "x":16.5, "y":4.75}, + {"label":"3", "x":17.5, "y":4.75}, + + {"label":"Ctrl", "x":0, "y":5.75, "w":1.25}, + {"label":"Win", "x":1.25, "y":5.75}, + {"label":"Alt", "x":2.25, "y":5.75}, + {"label":"MO(1)", "x":3.25, "y":5.75}, + {"label":"Space", "x":4.25, "y":5.75, "w":6.25}, + {"label":"Alt", "x":10.5, "y":5.75, "w":1.25}, + {"label":"Ctrl", "x":11.75, "y":5.75, "w":1.25}, + {"label":"\u2190", "x":13.25, "y":6}, + {"label":"\u2193", "x":14.25, "y":6}, + {"label":"\u2192", "x":15.25, "y":6}, + {"label":"0", "x":16.5, "y":5.75}, + {"label":".", "x":17.5, "y":5.75}, + {"label":"Enter", "x":18.5, "y":4.75, "h":2} + ] } } } diff --git a/keyboards/kabedon/kabedon98e/kabedon98e.c b/keyboards/kabedon/kabedon98e/kabedon98e.c index 5142c5887d..09af36de42 100644 --- a/keyboards/kabedon/kabedon98e/kabedon98e.c +++ b/keyboards/kabedon/kabedon98e/kabedon98e.c @@ -14,3 +14,42 @@ * along with this program. If not, see . */ #include "kabedon98e.h" + +static uint8_t encoder_state[ENCODERS] = {0}; +static keypos_t encoder_cw[ENCODERS] = ENCODERS_CW_KEY; +static keypos_t encoder_ccw[ENCODERS] = ENCODERS_CCW_KEY; + +void encoder_action_unregister(void) { + for (int index = 0; index < ENCODERS; ++index) { + if (encoder_state[index]) { + keyevent_t encoder_event = (keyevent_t) { + .key = encoder_state[index] >> 1 ? encoder_cw[index] : encoder_ccw[index], + .pressed = false, + .time = (timer_read() | 1) + }; + encoder_state[index] = 0; + action_exec(encoder_event); + } + } +} + +void encoder_action_register(uint8_t index, bool clockwise) { + keyevent_t encoder_event = (keyevent_t) { + .key = clockwise ? encoder_cw[index] : encoder_ccw[index], + .pressed = true, + .time = (timer_read() | 1) + }; + encoder_state[index] = (clockwise ^ 1) | (clockwise << 1); + action_exec(encoder_event); +} + +void matrix_scan_kb(void) { + encoder_action_unregister(); + matrix_scan_user(); +} + +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + encoder_action_register(index, clockwise); + return true; +}; diff --git a/keyboards/kabedon/kabedon98e/kabedon98e.h b/keyboards/kabedon/kabedon98e/kabedon98e.h index 0ddad3abf5..ce4b3fa0b2 100644 --- a/keyboards/kabedon/kabedon98e/kabedon98e.h +++ b/keyboards/kabedon/kabedon98e/kabedon98e.h @@ -17,26 +17,47 @@ #include "quantum.h" -#define XXXX KC_NO +#define XXX KC_NO + +/* ┌──┬──┐ ┌──┬──┐ + * │00│20│ │60│80│ + * └──┴──┘ └──┴──┘ + * \─en1┘ └en2─/ + * ┌───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┐ ┌───┐ ┌───┐ + * │10 │ │01 │11 │02 │12 │ │03 │13 │04 │14 │ │05 │15 │16 │17 │ │57 │ │48 │ │40 │ + * └───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┘ └───┘ └───┘ + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ ┌───┬───┬───┬───┐ + * │30 │21 │31 │22 │32 │23 │33 │24 │34 │25 │35 │26 │36 │37 │ │39 │49 │4A │5A │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ ├───┼───┼───┼───┤ + * │50 │41 │51 │42 │52 │43 │53 │44 │54 │45 │55 │46 │56 │47 │ │59 │69 │6A │ │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ ├───┼───┼───┤ │ + * │70 │61 │71 │62 │72 │63 │73 │64 │74 │65 │75 │66 │77 │ │79 │89 │8A │7A │ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┘ ├───┼───┼───┼───┤ + * │90 │91 │82 │92 │83 │93 │84 │94 │85 │95 │86 │97 │┌───┐│99 │A9 │9A │ │ + * ├────┬───┼───┼───┼───┴───┴───┴───┴───┴───┴┬──┴─┬─┴──┬───┘│88 │└───┼───┼───┤ │ + * │B0 │A1 │B1 │B3 │B2 │B5 │A7 │┌───┼───┼───┐│B9 │AA │BA │ + * └────┴───┴───┴───┴────────────────────────┴────┴────┘│B7 │A8 │B8 │└───┴───┴───┘ + * └───┴───┴───┘ + */ #define LAYOUT( \ - KB00, KA01, KB01, KA02, KB02, KA03, KB03, KA04, KB04, KA05, KB05, KB06, KB07, KF07, KE08, KE00, \ - KD00, KC01, KD01, KC02, KD02, KC03, KD03, KC04, KD04, KC05, KD05, KC06, KD06, KD07, KD09, KE09, KE10, KF10, KA00, \ - KF00, KE01, KF01, KE02, KF02, KE03, KF03, KE04, KF04, KE05, KF05, KE06, KF06, KE07, KF09, KG09, KG10, KC00, \ - KH00, KG01, KH01, KG02, KH02, KG03, KH03, KG04, KH04, KG05, KH05, KG06, KH07, KH09, KI09, KI10, KH10, \ - KJ00, KJ01, KI02, KJ02, KI03, KJ03, KI04, KJ04, KI05, KJ05, KI06, KJ07, KI08, KJ09, KK09, KJ10, KG00, \ - KL00, KK01, KL01, KL03, KL02, KL05, KK07, KL07, KK08, KL08, KL09, KK10, KL10, KI00 \ + K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K16, K17, K57, K00,K48,K20, K60,K40,K80, \ + K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K26, K36, K37, K39, K49, K4A, K5A, \ + K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K46, K56, K47, K59, K69, K6A, \ + K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K66, K77, K79, K89, K8A, K7A, \ + K90, K91, K82, K92, K83, K93, K84, K94, K85, K95, K86, K97, K88, K99, KA9, K9A, \ + KB0, KA1, KB1, KB3, KB2, KB5, KA7, KB7, KA8, KB8, KB9, KAA, KBA \ ) { \ - { KA00, KA01, KA02, KA03, KA04, KA05, XXXX, XXXX, XXXX, XXXX, XXXX }, \ - { KB00, KB01, KB02, KB03, KB04, KB05, KB06, KB07, XXXX, XXXX, XXXX }, \ - { KC00, KC01, KC02, KC03, KC04, KC05, KC06, XXXX, XXXX, XXXX, XXXX }, \ - { KD00, KD01, KD02, KD03, KD04, KD05, KD06, KD07, XXXX, KD09, XXXX }, \ - { KE00, KE01, KE02, KE03, KE04, KE05, KE06, KE07, KE08, KE09, KE10 }, \ - { KF00, KF01, KF02, KF03, KF04, KF05, KF06, KF07, XXXX, KF09, KF10 }, \ - { KG00, KG01, KG02, KG03, KG04, KG05, KG06, XXXX, XXXX, KG09, KG10 }, \ - { KH00, KH01, KH02, KH03, KH04, KH05, XXXX, KH07, XXXX, KH09, KH10 }, \ - { KI00, XXXX, KI02, KI03, KI04, KI05, KI06, XXXX, KI08, KI09, KI10 }, \ - { KJ00, KJ01, KJ02, KJ03, KJ04, KJ05, XXXX, KJ07, XXXX, KJ09, KJ10 }, \ - { XXXX, KK01, XXXX, XXXX, XXXX, XXXX, XXXX, KK07, KK08, KK09, KK10 }, \ - { KL00, KL01, KL02, KL03, XXXX, KL05, XXXX, KL07, KL08, KL09, KL10 } \ + { K00, K01, K02, K03, K04, K05, XXX, XXX, XXX, XXX, XXX }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, XXX, XXX, XXX }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX, XXX, XXX, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, XXX, K39, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A }, \ + { K50, K51, K52, K53, K54, K55, K56, K57, XXX, K59, K5A }, \ + { K60, K61, K62, K63, K64, K65, K66, XXX, XXX, K69, K6A }, \ + { K70, K71, K72, K73, K74, K75, XXX, K77, XXX, K79, K7A }, \ + { K80, XXX, K82, K83, K84, K85, K86, XXX, K88, K89, K8A }, \ + { K90, K91, K92, K93, K94, K95, XXX, K97, XXX, K99, K9A }, \ + { XXX, KA1, XXX, XXX, XXX, XXX, XXX, KA7, KA8, KA9, KAA }, \ + { KB0, KB1, KB2, KB3, XXX, KB5, XXX, KB7, KB8, KB9, KBA } \ } diff --git a/keyboards/kabedon/kabedon98e/keymaps/default/keymap.c b/keyboards/kabedon/kabedon98e/keymaps/default/keymap.c index bace7931df..608110417e 100644 --- a/keyboards/kabedon/kabedon98e/keymaps/default/keymap.c +++ b/keyboards/kabedon/kabedon98e/keymaps/default/keymap.c @@ -45,64 +45,27 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { └──┘└──┘└──┘ */ [_BASE] = LAYOUT( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_INS, KC_MUTE, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, KC_HOME, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_END, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PGUP, - KC_LCTL, KC_LGUI, KC_LALT, MO(1), KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT, KC_PGDN), + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_HOME, KC_INS, KC_END, KC_PGUP, KC_MUTE, KC_PGDN, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, + KC_LCTL, KC_LGUI, KC_LALT, MO(1), KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT), [_FN] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_VAD, RGB_HUD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_VAD, RGB_HUD, KC_TRNS, KC_TRNS, KC_TRNS), [_FN1] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) - -}; - -static uint8_t encoder_state[ENCODERS] = {0}; -static keypos_t encoder_cw[ENCODERS] = ENCODERS_CW_KEY; -static keypos_t encoder_ccw[ENCODERS] = ENCODERS_CCW_KEY; - -void encoder_action_unregister(void) { - for (int index = 0; index < ENCODERS; ++index) { - if (encoder_state[index]) { - keyevent_t encoder_event = (keyevent_t) { - .key = encoder_state[index] >> 1 ? encoder_cw[index] : encoder_ccw[index], - .pressed = false, - .time = (timer_read() | 1) - }; - encoder_state[index] = 0; - action_exec(encoder_event); - } - } -} - -void encoder_action_register(uint8_t index, bool clockwise) { - keyevent_t encoder_event = (keyevent_t) { - .key = clockwise ? encoder_cw[index] : encoder_ccw[index], - .pressed = true, - .time = (timer_read() | 1) - }; - encoder_state[index] = (clockwise ^ 1) | (clockwise << 1); - action_exec(encoder_event); -} - -void matrix_scan_user(void) { - encoder_action_unregister(); -} + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) -bool encoder_update_user(uint8_t index, bool clockwise) { - encoder_action_register(index, clockwise); - return true; }; diff --git a/keyboards/kabedon/kabedon98e/keymaps/via/keymap.c b/keyboards/kabedon/kabedon98e/keymaps/via/keymap.c index bace7931df..608110417e 100644 --- a/keyboards/kabedon/kabedon98e/keymaps/via/keymap.c +++ b/keyboards/kabedon/kabedon98e/keymaps/via/keymap.c @@ -45,64 +45,27 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { └──┘└──┘└──┘ */ [_BASE] = LAYOUT( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_INS, KC_MUTE, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, KC_HOME, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_END, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PGUP, - KC_LCTL, KC_LGUI, KC_LALT, MO(1), KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT, KC_PGDN), + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_HOME, KC_INS, KC_END, KC_PGUP, KC_MUTE, KC_PGDN, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, + KC_LCTL, KC_LGUI, KC_LALT, MO(1), KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT), [_FN] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_VAD, RGB_HUD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_VAD, RGB_HUD, KC_TRNS, KC_TRNS, KC_TRNS), [_FN1] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) - -}; - -static uint8_t encoder_state[ENCODERS] = {0}; -static keypos_t encoder_cw[ENCODERS] = ENCODERS_CW_KEY; -static keypos_t encoder_ccw[ENCODERS] = ENCODERS_CCW_KEY; - -void encoder_action_unregister(void) { - for (int index = 0; index < ENCODERS; ++index) { - if (encoder_state[index]) { - keyevent_t encoder_event = (keyevent_t) { - .key = encoder_state[index] >> 1 ? encoder_cw[index] : encoder_ccw[index], - .pressed = false, - .time = (timer_read() | 1) - }; - encoder_state[index] = 0; - action_exec(encoder_event); - } - } -} - -void encoder_action_register(uint8_t index, bool clockwise) { - keyevent_t encoder_event = (keyevent_t) { - .key = clockwise ? encoder_cw[index] : encoder_ccw[index], - .pressed = true, - .time = (timer_read() | 1) - }; - encoder_state[index] = (clockwise ^ 1) | (clockwise << 1); - action_exec(encoder_event); -} - -void matrix_scan_user(void) { - encoder_action_unregister(); -} + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) -bool encoder_update_user(uint8_t index, bool clockwise) { - encoder_action_register(index, clockwise); - return true; }; From 2d8dcf08e8981a30f2430a8794ff5013c56cfdd4 Mon Sep 17 00:00:00 2001 From: takashicompany Date: Tue, 12 Oct 2021 11:41:50 +0900 Subject: [PATCH 268/595] [Keyboard] Add "Center x Enter" (#14790) Co-authored-by: Drashna Jaelre --- .../center_enter/center_enter.c | 17 ++ .../center_enter/center_enter.h | 37 ++++ .../takashicompany/center_enter/config.h | 153 ++++++++++++++ .../takashicompany/center_enter/info.json | 191 ++++++++++++++++++ .../center_enter/keymaps/default/keymap.c | 97 +++++++++ .../center_enter/keymaps/via/config.h | 1 + .../center_enter/keymaps/via/keymap.c | 91 +++++++++ .../center_enter/keymaps/via/rules.mk | 1 + .../takashicompany/center_enter/readme.md | 29 +++ .../takashicompany/center_enter/rules.mk | 23 +++ 10 files changed, 640 insertions(+) create mode 100644 keyboards/takashicompany/center_enter/center_enter.c create mode 100644 keyboards/takashicompany/center_enter/center_enter.h create mode 100644 keyboards/takashicompany/center_enter/config.h create mode 100644 keyboards/takashicompany/center_enter/info.json create mode 100644 keyboards/takashicompany/center_enter/keymaps/default/keymap.c create mode 100644 keyboards/takashicompany/center_enter/keymaps/via/config.h create mode 100644 keyboards/takashicompany/center_enter/keymaps/via/keymap.c create mode 100644 keyboards/takashicompany/center_enter/keymaps/via/rules.mk create mode 100644 keyboards/takashicompany/center_enter/readme.md create mode 100644 keyboards/takashicompany/center_enter/rules.mk diff --git a/keyboards/takashicompany/center_enter/center_enter.c b/keyboards/takashicompany/center_enter/center_enter.c new file mode 100644 index 0000000000..4973e6a643 --- /dev/null +++ b/keyboards/takashicompany/center_enter/center_enter.c @@ -0,0 +1,17 @@ +/* Copyright 2021 takashicompany + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "center_enter.h" diff --git a/keyboards/takashicompany/center_enter/center_enter.h b/keyboards/takashicompany/center_enter/center_enter.h new file mode 100644 index 0000000000..0bd576f432 --- /dev/null +++ b/keyboards/takashicompany/center_enter/center_enter.h @@ -0,0 +1,37 @@ +/* Copyright 2021 takashicompany + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + k00, k01, k02, k03, k04, k05, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b \ +) { \ + { k00, k01, k02, k03, k04, k05, KC_NO, k07, k08, k09, k0a, k0b }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b } \ +} diff --git a/keyboards/takashicompany/center_enter/config.h b/keyboards/takashicompany/center_enter/config.h new file mode 100644 index 0000000000..94868bde1e --- /dev/null +++ b/keyboards/takashicompany/center_enter/config.h @@ -0,0 +1,153 @@ +/* +Copyright 2021 takashicompany + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x7463 // tc = takashicompany +#define PRODUCT_ID 0x0012 +#define DEVICE_VER 0x0001 +#define MANUFACTURER takashicompany +#define PRODUCT Center x Enter + +/* key matrix size */ +#define MATRIX_ROWS 3 +#define MATRIX_COLS 12 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { E6, B4, B5 } +#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, D7, B2, B6, D0, D4, C6} +#define UNUSED_PINS + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +#define ENCODER_RESOLUTION 1 +#define ENCODERS_PAD_A { D2 } +#define ENCODERS_PAD_B { D1 } + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +//#define LED_NUM_LOCK_PIN B0 +//#define LED_CAPS_LOCK_PIN B1 +//#define LED_SCROLL_LOCK_PIN B2 +//#define LED_COMPOSE_PIN B3 +//#define LED_KANA_PIN B4 + +//#define BACKLIGHT_PIN B7 +//#define BACKLIGHT_LEVELS 3 +//#define BACKLIGHT_BREATHING + +#define RGB_DI_PIN D3 +#ifdef RGB_DI_PIN +# define RGBLED_NUM 16 +# define RGBLIGHT_HUE_STEP 8 +# define RGBLIGHT_SAT_STEP 8 +# define RGBLIGHT_VAL_STEP 8 +# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +# define RGBLIGHT_EFFECT_BREATHING +# define RGBLIGHT_EFFECT_RAINBOW_MOOD +# define RGBLIGHT_EFFECT_RAINBOW_SWIRL +# define RGBLIGHT_EFFECT_SNAKE +# define RGBLIGHT_EFFECT_KNIGHT +# define RGBLIGHT_EFFECT_CHRISTMAS +# define RGBLIGHT_EFFECT_STATIC_GRADIENT +# define RGBLIGHT_EFFECT_RGB_TEST +# define RGBLIGHT_EFFECT_ALTERNATING +/*== customize breathing effect ==*/ +/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +/*==== use exp() and sin() ====*/ +//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/takashicompany/center_enter/info.json b/keyboards/takashicompany/center_enter/info.json new file mode 100644 index 0000000000..f0f3af1f39 --- /dev/null +++ b/keyboards/takashicompany/center_enter/info.json @@ -0,0 +1,191 @@ +{ + "keyboard_name": "Center x Enter", + "url": "", + "maintainer": "takashicompany", + "layouts": { + "LAYOUT": { + "layout": [ + { + "label": "201", + "x": 0, + "y": 0, + "w": 1.5 + }, + { + "label": "1", + "x": 1.5, + "y": 0 + }, + { + "label": "2", + "x": 2.5, + "y": 0 + }, + { + "label": "3", + "x": 3.5, + "y": 0 + }, + { + "label": "4", + "x": 4.5, + "y": 0 + }, + { + "label": "5", + "x": 5.5, + "y": 0 + }, + { + "label": "901", + "x": 6.75, + "y": 0, + "w": 1.25, + "h": 2 + }, + { + "label": "6", + "x": 8, + "y": 0 + }, + { + "label": "7", + "x": 9, + "y": 0 + }, + { + "label": "8", + "x": 10, + "y": 0 + }, + { + "label": "9", + "x": 11, + "y": 0 + }, + { + "label": "10", + "x": 12, + "y": 0 + }, + { + "label": "301", + "x": 0, + "y": 1, + "w": 1.75 + }, + { + "label": "11", + "x": 1.75, + "y": 1 + }, + { + "label": "12", + "x": 2.75, + "y": 1 + }, + { + "label": "13", + "x": 3.75, + "y": 1 + }, + { + "label": "14", + "x": 4.75, + "y": 1 + }, + { + "label": "15", + "x": 5.75, + "y": 1 + }, + { + "label": "16", + "x": 8, + "y": 1 + }, + { + "label": "17", + "x": 9, + "y": 1 + }, + { + "label": "18", + "x": 10, + "y": 1 + }, + { + "label": "19", + "x": 11, + "y": 1 + }, + { + "label": "20", + "x": 12, + "y": 1 + }, + { + "label": "401", + "x": 0, + "y": 2, + "w": 2 + }, + { + "label": "21", + "x": 2, + "y": 2 + }, + { + "label": "22", + "x": 3, + "y": 2 + }, + { + "label": "23", + "x": 4, + "y": 2 + }, + { + "label": "24", + "x": 5, + "y": 2 + }, + { + "label": "25", + "x": 6, + "y": 2 + }, + { + "label": "31", + "x": 7, + "y": 2 + }, + { + "label": "26", + "x": 8, + "y": 2 + }, + { + "label": "27", + "x": 9, + "y": 2 + }, + { + "label": "28", + "x": 10, + "y": 2 + }, + { + "label": "29", + "x": 11, + "y": 2 + }, + { + "label": "30", + "x": 12, + "y": 2 + } + ] + } + } +} \ No newline at end of file diff --git a/keyboards/takashicompany/center_enter/keymaps/default/keymap.c b/keyboards/takashicompany/center_enter/keymaps/default/keymap.c new file mode 100644 index 0000000000..1003d0558c --- /dev/null +++ b/keyboards/takashicompany/center_enter/keymaps/default/keymap.c @@ -0,0 +1,97 @@ +/* Copyright 2021 takashicompany + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +// Defines the keycodes used by our macros in process_record_user +enum custom_keycodes { + SWITCH_LANG +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + LAYOUT( + KC_TAB, LT(2, KC_Q), KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, ALT_T(KC_P), + KC_LCTL, KC_A, KC_S, LT(2, KC_D), KC_F, KC_G, SWITCH_LANG, KC_H, KC_J, LT(2, KC_K), KC_L, KC_ENT, + KC_LSFT, KC_Z, GUI_T(KC_X), ALT_T(KC_C), LT(1, KC_V), KC_B, KC_SPC, KC_N, LT(1, KC_M), KC_COMM, CTL_T(KC_DOT), KC_BSPC + ), + + LAYOUT( + KC_TRNS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, + KC_TRNS, KC_EQL, KC_LBRC, KC_SLSH, KC_MINS, KC_RO, KC_TRNS, KC_SCLN, KC_QUOT, KC_RBRC, KC_NUHS, KC_JYEN, + KC_TRNS, KC_LSFT, KC_LGUI, KC_LALT, KC_LANG2, KC_LSFT, KC_TRNS, KC_SPC, KC_LANG1, KC_TRNS, KC_TRNS, KC_DEL + ), + + LAYOUT( + KC_TRNS, KC_ESC, KC_TAB, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_UP, KC_NO, KC_NO, + KC_TRNS, KC_LCTL, KC_TRNS, KC_QUES, KC_EXLM, KC_NO, KC_TRNS, KC_NO, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, + KC_TRNS, KC_LSFT, KC_LGUI, KC_LALT, KC_LANG2, KC_TRNS, KC_TRNS, KC_TRNS, KC_LANG1, KC_NO, MO(3), KC_DEL + ), + + LAYOUT( + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, + KC_TRNS, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, + KC_TRNS, RGB_M_K, RGB_M_X, RGB_M_G, RGB_M_T, RGB_M_T, KC_TRNS, KC_F11, KC_F12, KC_CAPS, KC_NO, KC_NO + ), + + LAYOUT( + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO + ), +}; + +bool is_lang1 = false; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case SWITCH_LANG: + if (record->event.pressed) { + + if (is_lang1) { + register_code(KC_LANG1); + is_lang1 = false; + } + else { + register_code(KC_LANG2); + is_lang1 = true; + } + } + break; + case KC_LANG1: + if (record->event.pressed) { + is_lang1 = false; + } + break; + + case KC_LANG2: + if (record->event.pressed) { + is_lang1 = true; + } + break; + } + return true; +} + +bool encoder_update_user(uint8_t index, bool clockwise) { + + if (clockwise) { + tap_code(KC_MS_WH_UP); + } else { + tap_code(KC_MS_WH_DOWN); + } + + return true; +} diff --git a/keyboards/takashicompany/center_enter/keymaps/via/config.h b/keyboards/takashicompany/center_enter/keymaps/via/config.h new file mode 100644 index 0000000000..ec7c614382 --- /dev/null +++ b/keyboards/takashicompany/center_enter/keymaps/via/config.h @@ -0,0 +1 @@ +#define DYNAMIC_KEYMAP_LAYER_COUNT 8 \ No newline at end of file diff --git a/keyboards/takashicompany/center_enter/keymaps/via/keymap.c b/keyboards/takashicompany/center_enter/keymaps/via/keymap.c new file mode 100644 index 0000000000..cc11ca18a8 --- /dev/null +++ b/keyboards/takashicompany/center_enter/keymaps/via/keymap.c @@ -0,0 +1,91 @@ +/* Copyright 2021 takashicompany + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +// Defines the keycodes used by our macros in process_record_user +enum custom_keycodes { + SWITCH_LANG +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + LAYOUT( + KC_TAB, LT(2, KC_Q), KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, ALT_T(KC_P), + KC_LCTL, KC_A, KC_S, LT(2, KC_D), KC_F, KC_G, SWITCH_LANG, KC_H, KC_J, LT(2, KC_K), KC_L, KC_ENT, + KC_LSFT, KC_Z, GUI_T(KC_X), ALT_T(KC_C), LT(1, KC_V), KC_B, KC_SPC, KC_N, LT(1, KC_M), KC_COMM, CTL_T(KC_DOT), KC_BSPC + ), + + LAYOUT( + KC_TRNS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, + KC_TRNS, KC_EQL, KC_LBRC, KC_SLSH, KC_MINS, KC_RO, KC_TRNS, KC_SCLN, KC_QUOT, KC_RBRC, KC_NUHS, KC_JYEN, + KC_TRNS, KC_LSFT, KC_LGUI, KC_LALT, KC_LANG2, KC_LSFT, KC_TRNS, KC_SPC, KC_LANG1, KC_TRNS, KC_TRNS, KC_DEL + ), + + LAYOUT( + KC_TRNS, KC_ESC, KC_TAB, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_UP, KC_NO, KC_NO, + KC_TRNS, KC_LCTL, KC_TRNS, KC_QUES, KC_EXLM, KC_NO, KC_TRNS, KC_NO, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, + KC_TRNS, KC_LSFT, KC_LGUI, KC_LALT, KC_LANG2, KC_TRNS, KC_TRNS, KC_TRNS, KC_LANG1, KC_NO, MO(3), KC_DEL + ), + + LAYOUT( + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, + KC_TRNS, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, + KC_TRNS, RGB_M_K, RGB_M_X, RGB_M_G, RGB_M_T, RGB_M_T, KC_TRNS, KC_F11, KC_F12, KC_CAPS, KC_NO, KC_NO + ) +}; + +bool is_lang1 = false; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case SWITCH_LANG: + if (record->event.pressed) { + + if (is_lang1) { + register_code(KC_LANG1); + is_lang1 = false; + } + else { + register_code(KC_LANG2); + is_lang1 = true; + } + } + break; + case KC_LANG1: + if (record->event.pressed) { + is_lang1 = false; + } + break; + + case KC_LANG2: + if (record->event.pressed) { + is_lang1 = true; + } + break; + } + return true; +} + +bool encoder_update_user(uint8_t index, bool clockwise) { + + if (clockwise) { + tap_code(KC_MS_WH_UP); + } else { + tap_code(KC_MS_WH_DOWN); + } + + return true; +} diff --git a/keyboards/takashicompany/center_enter/keymaps/via/rules.mk b/keyboards/takashicompany/center_enter/keymaps/via/rules.mk new file mode 100644 index 0000000000..036bd6d1c3 --- /dev/null +++ b/keyboards/takashicompany/center_enter/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes \ No newline at end of file diff --git a/keyboards/takashicompany/center_enter/readme.md b/keyboards/takashicompany/center_enter/readme.md new file mode 100644 index 0000000000..d8db5cc7eb --- /dev/null +++ b/keyboards/takashicompany/center_enter/readme.md @@ -0,0 +1,29 @@ +# Center x Enter + +![image](https://raw.githubusercontent.com/takashicompany/center-enter/master/images/qmk.jpg) + +A 30% keyboard with the enter key placed in the center. +Option to install a rotary encoder is also available. +VIA (Remap) is also supported. + +* Keyboard Maintainer: [takashicompany](https://github.com/takashicompany) +* Hardware Supported: Center x Enter PCB, Pro Micro +* Hardware Availability: https://github.com/takashicompany/center-enter + +Make example for this keyboard (after setting up your build environment): + + make takashicompany/center_enter:default + +Flashing example for this keyboard: + + make takashicompany/center_enter:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available diff --git a/keyboards/takashicompany/center_enter/rules.mk b/keyboards/takashicompany/center_enter/rules.mk new file mode 100644 index 0000000000..d8e321ce2e --- /dev/null +++ b/keyboards/takashicompany/center_enter/rules.mk @@ -0,0 +1,23 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = caterina + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output + +ENCODER_ENABLE = yes From a0b7c1618af74cc1e18a482ac79ed1ddedcda2df Mon Sep 17 00:00:00 2001 From: etiennelepagel <50152897+etiennelepagel@users.noreply.github.com> Date: Mon, 11 Oct 2021 22:42:14 -0400 Subject: [PATCH 269/595] [Keyboard] Add MachKeyboards Mach3 (#14791) Co-authored-by: Ryan --- keyboards/machkeyboards/mach3/config.h | 45 ++++++++++++++++++ keyboards/machkeyboards/mach3/info.json | 47 +++++++++++++++++++ .../mach3/keymaps/default/keymap.c | 24 ++++++++++ .../mach3/keymaps/default/readme.md | 4 ++ .../machkeyboards/mach3/keymaps/via/keymap.c | 24 ++++++++++ .../machkeyboards/mach3/keymaps/via/rules.mk | 2 + keyboards/machkeyboards/mach3/mach3.c | 42 +++++++++++++++++ keyboards/machkeyboards/mach3/mach3.h | 29 ++++++++++++ keyboards/machkeyboards/mach3/readme.md | 22 +++++++++ keyboards/machkeyboards/mach3/rules.mk | 23 +++++++++ keyboards/machkeyboards/readme.md | 7 +++ 11 files changed, 269 insertions(+) create mode 100644 keyboards/machkeyboards/mach3/config.h create mode 100644 keyboards/machkeyboards/mach3/info.json create mode 100644 keyboards/machkeyboards/mach3/keymaps/default/keymap.c create mode 100644 keyboards/machkeyboards/mach3/keymaps/default/readme.md create mode 100644 keyboards/machkeyboards/mach3/keymaps/via/keymap.c create mode 100644 keyboards/machkeyboards/mach3/keymaps/via/rules.mk create mode 100644 keyboards/machkeyboards/mach3/mach3.c create mode 100644 keyboards/machkeyboards/mach3/mach3.h create mode 100644 keyboards/machkeyboards/mach3/readme.md create mode 100644 keyboards/machkeyboards/mach3/rules.mk create mode 100644 keyboards/machkeyboards/readme.md diff --git a/keyboards/machkeyboards/mach3/config.h b/keyboards/machkeyboards/mach3/config.h new file mode 100644 index 0000000000..d78f8dce9b --- /dev/null +++ b/keyboards/machkeyboards/mach3/config.h @@ -0,0 +1,45 @@ +/* Copyright 2021 Mach Keyboards + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4D41 +#define PRODUCT_ID 0x4D33 +#define DEVICE_VER 0x0001 +#define MANUFACTURER MachKeyboard +#define PRODUCT Mach33 + +/* key matrix size */ +#define MATRIX_ROWS 3 +#define MATRIX_COLS 3 + +/* key pins */ +#define MATRIX_ROW_PINS { D1, D0, D4 } +#define MATRIX_COL_PINS { E6, B4, B5 } + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* backlight */ +#define BACKLIGHT_PIN B6 +#define BACKLIGHT_BREATHING +#define BACKLIGHT_LEVELS 5 + +/* debounce */ +#define DEBOUNCE 5 \ No newline at end of file diff --git a/keyboards/machkeyboards/mach3/info.json b/keyboards/machkeyboards/mach3/info.json new file mode 100644 index 0000000000..42f29a9873 --- /dev/null +++ b/keyboards/machkeyboards/mach3/info.json @@ -0,0 +1,47 @@ +{ + "keyboard_name": "Mach 3", + "url": "https://machkeyboards.com", + "maintainer": "etiennelepagel", + "layouts": { + "LAYOUT_3x3": { + "layout": [ + { + "x": 0, + "y": 0 + }, + { + "x": 1, + "y": 0 + }, + { + "x": 2, + "y": 0 + }, + { + "x": 0, + "y": 1 + }, + { + "x": 1, + "y": 1 + }, + { + "x": 2, + "y": 1 + }, + { + "x": 0, + "y": 2 + }, + { + "x": 1, + "y": 2 + }, + { + "x": 2, + "y": 2 + } + ] + } + } +} \ No newline at end of file diff --git a/keyboards/machkeyboards/mach3/keymaps/default/keymap.c b/keyboards/machkeyboards/mach3/keymaps/default/keymap.c new file mode 100644 index 0000000000..19133200e0 --- /dev/null +++ b/keyboards/machkeyboards/mach3/keymaps/default/keymap.c @@ -0,0 +1,24 @@ +/* Copyright 2021 Mach Keyboards + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_3x3( + BL_INC, BL_DEC, BL_BRTG, + BL_INC, BL_DEC, BL_BRTG, + BL_INC, BL_DEC, BL_BRTG + ) +}; \ No newline at end of file diff --git a/keyboards/machkeyboards/mach3/keymaps/default/readme.md b/keyboards/machkeyboards/mach3/keymaps/default/readme.md new file mode 100644 index 0000000000..d12e48d497 --- /dev/null +++ b/keyboards/machkeyboards/mach3/keymaps/default/readme.md @@ -0,0 +1,4 @@ +# Default Mach 3 Keymap + +This is the default layout that comes with the Mach 3. +The keys are set to only control the backlight. \ No newline at end of file diff --git a/keyboards/machkeyboards/mach3/keymaps/via/keymap.c b/keyboards/machkeyboards/mach3/keymaps/via/keymap.c new file mode 100644 index 0000000000..19133200e0 --- /dev/null +++ b/keyboards/machkeyboards/mach3/keymaps/via/keymap.c @@ -0,0 +1,24 @@ +/* Copyright 2021 Mach Keyboards + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_3x3( + BL_INC, BL_DEC, BL_BRTG, + BL_INC, BL_DEC, BL_BRTG, + BL_INC, BL_DEC, BL_BRTG + ) +}; \ No newline at end of file diff --git a/keyboards/machkeyboards/mach3/keymaps/via/rules.mk b/keyboards/machkeyboards/mach3/keymaps/via/rules.mk new file mode 100644 index 0000000000..36b7ba9cbc --- /dev/null +++ b/keyboards/machkeyboards/mach3/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/machkeyboards/mach3/mach3.c b/keyboards/machkeyboards/mach3/mach3.c new file mode 100644 index 0000000000..9769d02a53 --- /dev/null +++ b/keyboards/machkeyboards/mach3/mach3.c @@ -0,0 +1,42 @@ +/* Copyright 2021 Mach Keyboards + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "mach3.h" + +#ifdef RGB_MATRIX_ENABLE +led_config_t g_led_config = { { + // Key Matrix to LED Index + { 0, 1, 2 }, + { 7, 6, 5 }, + { 8, 9, 10 }, +}, { + // LED Index to Physical Position + { 0, 0 }, { 112, 0 }, { 224, 0 }, + { 0, 112 }, { 112, 112 }, { 224, 112 }, + { 0, 224 }, { 112, 224 }, { 224, 224 }, +}, { + // LED Index to Flag + 4, 4, 4, + 4, 4, 4, + 4, 4, 4 +} }; +#endif + +void keyboard_pre_init_kb(void) { + setPinOutput(F5); + writePinHigh(F5); + + keyboard_pre_init_user(); +} \ No newline at end of file diff --git a/keyboards/machkeyboards/mach3/mach3.h b/keyboards/machkeyboards/mach3/mach3.h new file mode 100644 index 0000000000..2eeadb3fba --- /dev/null +++ b/keyboards/machkeyboards/mach3/mach3.h @@ -0,0 +1,29 @@ +/* Copyright 2021 Mach Keyboards + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" + +#define LAYOUT_3x3( \ + K00, K01, K02, \ + K10, K11, K12, \ + K20, K21, K22 \ + ) \ + { \ + { K00, K01, K02 }, \ + { K10, K11, K12 }, \ + { K20, K21, K22 } \ + } diff --git a/keyboards/machkeyboards/mach3/readme.md b/keyboards/machkeyboards/mach3/readme.md new file mode 100644 index 0000000000..16c61511b1 --- /dev/null +++ b/keyboards/machkeyboards/mach3/readme.md @@ -0,0 +1,22 @@ +# Mach 3 + +A 3x3 macropad with RGB underglow. +Note: It sets an output pin to high, which is the alimentation of the backlight circuit. + +* Keyboard Maintainer: [etiennelepagel](https://github.com/etiennelepagel) +* Hardware Supported: Mach 3 from Mach Keyboards +* Hardware Availability: [Mach Keyboards Official Website](https://machkeyboards.com/) + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB +* **Keycode in layout**: Press the key mapped to `RESET` if it is available + +Make example for this keyboard (after setting up your build environment): + + make machkeyboards/mach3:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/machkeyboards/mach3/rules.mk b/keyboards/machkeyboards/mach3/rules.mk new file mode 100644 index 0000000000..e8f6fb4038 --- /dev/null +++ b/keyboards/machkeyboards/mach3/rules.mk @@ -0,0 +1,23 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = caterina + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +UNICODE_ENABLE = yes +BACKLIGHT_DRIVER = pwm \ No newline at end of file diff --git a/keyboards/machkeyboards/readme.md b/keyboards/machkeyboards/readme.md new file mode 100644 index 0000000000..ef2f8b159d --- /dev/null +++ b/keyboards/machkeyboards/readme.md @@ -0,0 +1,7 @@ +# Mach Keyboards + +Mach Keyboards focus itself on selling the best macropad in the world. + +[Mach Keyboards Official Website](https://machkeyboards.com) +[Discord](https://discord.gg/ukFKFc7eXy) +[Instagram](https://www.instagram.com/machkeyboards) \ No newline at end of file From c63c78f0801f595f2200dab7246a1264b1ec847d Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Wed, 13 Oct 2021 05:40:48 +0000 Subject: [PATCH 270/595] Kopibeng MNK88 Layout Extension (#14796) * friendly-format info.json * mnk88.h: use QMK 3-character notation * mnk88.h: add matrix diagram * add LAYOUT_tkl_ansi_f13 * add LAYOUT_tkl_ansi_tsangan_f13 * add LAYOUT_tkl_iso_f13 * add LAYOUT_tkl_iso_tsangan_f13 --- keyboards/kopibeng/mnk88/info.json | 577 ++++++++++++++++++++++++----- keyboards/kopibeng/mnk88/mnk88.h | 110 +++++- 2 files changed, 581 insertions(+), 106 deletions(-) diff --git a/keyboards/kopibeng/mnk88/info.json b/keyboards/kopibeng/mnk88/info.json index f8e313f610..60973689fb 100644 --- a/keyboards/kopibeng/mnk88/info.json +++ b/keyboards/kopibeng/mnk88/info.json @@ -5,98 +5,491 @@ "layouts": { "LAYOUT_all": { "layout": [ - { "label": "0,0", "x": 0, "y": 0 }, - { "label": "0,1", "x": 1.25, "y": 0 }, - { "label": "0,2", "x": 2.25, "y": 0 }, - { "label": "0,3", "x": 3.25, "y": 0 }, - { "label": "0,4", "x": 4.25, "y": 0 }, - { "label": "0,5", "x": 5.5, "y": 0 }, - { "label": "0,6", "x": 6.5, "y": 0 }, - { "label": "0,7", "x": 7.5, "y": 0 }, - { "label": "0,8", "x": 8.5, "y": 0 }, - { "label": "0,9", "x": 9.75, "y": 0 }, - { "label": "0,10", "x": 10.75, "y": 0 }, - { "label": "0,11", "x": 11.75, "y": 0 }, - { "label": "0,12", "x": 12.75, "y": 0 }, - { "label": "0,13", "x": 14, "y": 0 }, - { "label": "0,14", "x": 15.25, "y": 0 }, - { "label": "0,15", "x": 16.25, "y": 0 }, - { "label": "0,16", "x": 17.25, "y": 0 }, - { "label": "1,0", "x": 0, "y": 1.25 }, - { "label": "1,1", "x": 1, "y": 1.25 }, - { "label": "1,2", "x": 2, "y": 1.25 }, - { "label": "1,3", "x": 3, "y": 1.25 }, - { "label": "1,4", "x": 4, "y": 1.25 }, - { "label": "1,5", "x": 5, "y": 1.25 }, - { "label": "1,6", "x": 6, "y": 1.25 }, - { "label": "1,7", "x": 7, "y": 1.25 }, - { "label": "1,8", "x": 8, "y": 1.25 }, - { "label": "1,9", "x": 9, "y": 1.25 }, - { "label": "1,10", "x": 10, "y": 1.25 }, - { "label": "1,11", "x": 11, "y": 1.25 }, - { "label": "1,12", "x": 12, "y": 1.25 }, - { "label": "2,12", "x": 13, "y": 1.25 }, - { "label": "1,13", "x": 14, "y": 1.25 }, - { "label": "1,14", "x": 15.25, "y": 1.25 }, - { "label": "1,15", "x": 16.25, "y": 1.25 }, - { "label": "1,16", "x": 17.25, "y": 1.25 }, - { "label": "2,0", "w": 1.5, "x": 0, "y": 2.25 }, - { "label": "2,1", "x": 1.5, "y": 2.25 }, - { "label": "2,2", "x": 2.5, "y": 2.25 }, - { "label": "2,3", "x": 3.5, "y": 2.25 }, - { "label": "2,4", "x": 4.5, "y": 2.25 }, - { "label": "2,5", "x": 5.5, "y": 2.25 }, - { "label": "2,6", "x": 6.5, "y": 2.25 }, - { "label": "2,7", "x": 7.5, "y": 2.25 }, - { "label": "2,8", "x": 8.5, "y": 2.25 }, - { "label": "2,9", "x": 9.5, "y": 2.25 }, - { "label": "2,10", "x": 10.5, "y": 2.25 }, - { "label": "2,11", "x": 11.5, "y": 2.25 }, - { "label": "3,12", "x": 12.5, "y": 2.25 }, - { "label": "2,13", "w": 1.5, "x": 13.5, "y": 2.25 }, - { "label": "2,14", "x": 15.25, "y": 2.25 }, - { "label": "2,15", "x": 16.25, "y": 2.25 }, - { "label": "2,16", "x": 17.25, "y": 2.25 }, - { "label": "3,0", "w": 1.75, "x": 0, "y": 3.25 }, - { "label": "3,1", "x": 1.75, "y": 3.25 }, - { "label": "3,2", "x": 2.75, "y": 3.25 }, - { "label": "3,3", "x": 3.75, "y": 3.25 }, - { "label": "3,4", "x": 4.75, "y": 3.25 }, - { "label": "3,5", "x": 5.75, "y": 3.25 }, - { "label": "3,6", "x": 6.75, "y": 3.25 }, - { "label": "3,7", "x": 7.75, "y": 3.25 }, - { "label": "3,8", "x": 8.75, "y": 3.25 }, - { "label": "3,9", "x": 9.75, "y": 3.25 }, - { "label": "3,10", "x": 10.75, "y": 3.25 }, - { "label": "3,11", "x": 11.75, "y": 3.25 }, - { "label": "3,13", "w": 2.25, "x": 12.75, "y": 3.25 }, - { "label": "4,0", "w": 1.25, "x": 0, "y": 4.25 }, - { "label": "4,1", "x": 1.25, "y": 4.25 }, - { "label": "4,2", "x": 2.25, "y": 4.25 }, - { "label": "4,3", "x": 3.25, "y": 4.25 }, - { "label": "4,4", "x": 4.25, "y": 4.25 }, - { "label": "4,5", "x": 5.25, "y": 4.25 }, - { "label": "4,6", "x": 6.25, "y": 4.25 }, - { "label": "4,7", "x": 7.25, "y": 4.25 }, - { "label": "4,8", "x": 8.25, "y": 4.25 }, - { "label": "4,9", "x": 9.25, "y": 4.25 }, - { "label": "4,10", "x": 10.25, "y": 4.25 }, - { "label": "4,11", "x": 11.25, "y": 4.25 }, - { "label": "4,12", "w": 1.75, "x": 12.25, "y": 4.25 }, - { "label": "4,13", "x": 14, "y": 4.25 }, - { "label": "4,15", "x": 16.25, "y": 4.25 }, - { "label": "5,0", "w": 1.25, "x": 0, "y": 5.25 }, - { "label": "5,1", "w": 1.25, "x": 1.25, "y": 5.25 }, - { "label": "5,2", "w": 1.25, "x": 2.5, "y": 5.25 }, - { "label": "5,6", "w": 6.25, "x": 3.75, "y": 5.25 }, - { "label": "5,10", "w": 1.25, "x": 10, "y": 5.25 }, - { "label": "5,11", "w": 1.25, "x": 11.25, "y": 5.25 }, - { "label": "5,12", "w": 1.25, "x": 12.5, "y": 5.25 }, - { "label": "5,13", "w": 1.25, "x": 13.75, "y": 5.25 }, - { "label": "5,14", "x": 15.25, "y": 5.25 }, - { "label": "5,15", "x": 16.25, "y": 5.25 }, - { "label": "4,16", "x": 17.25, "y": 5.25 } + {"label":"K00", "x":0, "y":0}, + {"label":"K01", "x":1.25, "y":0}, + {"label":"K02", "x":2.25, "y":0}, + {"label":"K03", "x":3.25, "y":0}, + {"label":"K04", "x":4.25, "y":0}, + {"label":"K05", "x":5.5, "y":0}, + {"label":"K06", "x":6.5, "y":0}, + {"label":"K07", "x":7.5, "y":0}, + {"label":"K08", "x":8.5, "y":0}, + {"label":"K09", "x":9.75, "y":0}, + {"label":"K0A", "x":10.75, "y":0}, + {"label":"K0B", "x":11.75, "y":0}, + {"label":"K0C", "x":12.75, "y":0}, + {"label":"K0D", "x":14, "y":0}, + {"label":"K0E", "x":15.25, "y":0}, + {"label":"K0F", "x":16.25, "y":0}, + {"label":"K0G", "x":17.25, "y":0}, + + {"label":"K10", "x":0, "y":1.25}, + {"label":"K11", "x":1, "y":1.25}, + {"label":"K12", "x":2, "y":1.25}, + {"label":"K13", "x":3, "y":1.25}, + {"label":"K14", "x":4, "y":1.25}, + {"label":"K15", "x":5, "y":1.25}, + {"label":"K16", "x":6, "y":1.25}, + {"label":"K17", "x":7, "y":1.25}, + {"label":"K18", "x":8, "y":1.25}, + {"label":"K19", "x":9, "y":1.25}, + {"label":"K1A", "x":10, "y":1.25}, + {"label":"K1B", "x":11, "y":1.25}, + {"label":"K1C", "x":12, "y":1.25}, + {"label":"K2C", "x":13, "y":1.25}, + {"label":"K1D", "x":14, "y":1.25}, + {"label":"K1E", "x":15.25, "y":1.25}, + {"label":"K1F", "x":16.25, "y":1.25}, + {"label":"K1G", "x":17.25, "y":1.25}, + + {"label":"K20", "x":0, "y":2.25, "w":1.5}, + {"label":"K21", "x":1.5, "y":2.25}, + {"label":"K22", "x":2.5, "y":2.25}, + {"label":"K23", "x":3.5, "y":2.25}, + {"label":"K24", "x":4.5, "y":2.25}, + {"label":"K25", "x":5.5, "y":2.25}, + {"label":"K26", "x":6.5, "y":2.25}, + {"label":"K27", "x":7.5, "y":2.25}, + {"label":"K28", "x":8.5, "y":2.25}, + {"label":"K29", "x":9.5, "y":2.25}, + {"label":"K2A", "x":10.5, "y":2.25}, + {"label":"K2B", "x":11.5, "y":2.25}, + {"label":"K3C", "x":12.5, "y":2.25}, + {"label":"K2D", "x":13.5, "y":2.25, "w":1.5}, + {"label":"K2E", "x":15.25, "y":2.25}, + {"label":"K2F", "x":16.25, "y":2.25}, + {"label":"K2G", "x":17.25, "y":2.25}, + + {"label":"K30", "x":0, "y":3.25, "w":1.75}, + {"label":"K31", "x":1.75, "y":3.25}, + {"label":"K32", "x":2.75, "y":3.25}, + {"label":"K33", "x":3.75, "y":3.25}, + {"label":"K34", "x":4.75, "y":3.25}, + {"label":"K35", "x":5.75, "y":3.25}, + {"label":"K36", "x":6.75, "y":3.25}, + {"label":"K37", "x":7.75, "y":3.25}, + {"label":"K38", "x":8.75, "y":3.25}, + {"label":"K39", "x":9.75, "y":3.25}, + {"label":"K3A", "x":10.75, "y":3.25}, + {"label":"K3B", "x":11.75, "y":3.25}, + {"label":"K3D", "x":12.75, "y":3.25, "w":2.25}, + + {"label":"K40", "x":0, "y":4.25, "w":1.25}, + {"label":"K41", "x":1.25, "y":4.25}, + {"label":"K42", "x":2.25, "y":4.25}, + {"label":"K43", "x":3.25, "y":4.25}, + {"label":"K44", "x":4.25, "y":4.25}, + {"label":"K45", "x":5.25, "y":4.25}, + {"label":"K46", "x":6.25, "y":4.25}, + {"label":"K47", "x":7.25, "y":4.25}, + {"label":"K48", "x":8.25, "y":4.25}, + {"label":"K49", "x":9.25, "y":4.25}, + {"label":"K4A", "x":10.25, "y":4.25}, + {"label":"K4B", "x":11.25, "y":4.25}, + {"label":"K4C", "x":12.25, "y":4.25, "w":1.75}, + {"label":"K4D", "x":14, "y":4.25}, + {"label":"K4F", "x":16.25, "y":4.25}, + + {"label":"K50", "x":0, "y":5.25, "w":1.25}, + {"label":"K51", "x":1.25, "y":5.25, "w":1.25}, + {"label":"K52", "x":2.5, "y":5.25, "w":1.25}, + {"label":"K56", "x":3.75, "y":5.25, "w":6.25}, + {"label":"K5A", "x":10, "y":5.25, "w":1.25}, + {"label":"K5B", "x":11.25, "y":5.25, "w":1.25}, + {"label":"K5C", "x":12.5, "y":5.25, "w":1.25}, + {"label":"K5D", "x":13.75, "y":5.25, "w":1.25}, + {"label":"K5E", "x":15.25, "y":5.25}, + {"label":"K5F", "x":16.25, "y":5.25}, + {"label":"K4G", "x":17.25, "y":5.25} + ] + }, + "LAYOUT_tkl_ansi_f13": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":1.25, "y":0}, + {"label":"F2", "x":2.25, "y":0}, + {"label":"F3", "x":3.25, "y":0}, + {"label":"F4", "x":4.25, "y":0}, + {"label":"F5", "x":5.5, "y":0}, + {"label":"F6", "x":6.5, "y":0}, + {"label":"F7", "x":7.5, "y":0}, + {"label":"F8", "x":8.5, "y":0}, + {"label":"F9", "x":9.75, "y":0}, + {"label":"F10", "x":10.75, "y":0}, + {"label":"F11", "x":11.75, "y":0}, + {"label":"F12", "x":12.75, "y":0}, + {"label":"F13", "x":14, "y":0}, + {"label":"Print Screen", "x":15.25, "y":0}, + {"label":"Scroll Lock", "x":16.25, "y":0}, + {"label":"Pause", "x":17.25, "y":0}, + + {"label":"`~", "x":0, "y":1.25}, + {"label":"1!", "x":1, "y":1.25}, + {"label":"2@", "x":2, "y":1.25}, + {"label":"3#", "x":3, "y":1.25}, + {"label":"4$", "x":4, "y":1.25}, + {"label":"5%", "x":5, "y":1.25}, + {"label":"6^", "x":6, "y":1.25}, + {"label":"7&", "x":7, "y":1.25}, + {"label":"8*", "x":8, "y":1.25}, + {"label":"9(", "x":9, "y":1.25}, + {"label":"0)", "x":10, "y":1.25}, + {"label":"-_", "x":11, "y":1.25}, + {"label":"=+", "x":12, "y":1.25}, + {"label":"Backspace", "x":13, "y":1.25, "w":2}, + {"label":"Insert", "x":15.25, "y":1.25}, + {"label":"Home", "x":16.25, "y":1.25}, + {"label":"Page Up", "x":17.25, "y":1.25}, + + {"label":"Tab", "x":0, "y":2.25, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.25}, + {"label":"W", "x":2.5, "y":2.25}, + {"label":"E", "x":3.5, "y":2.25}, + {"label":"R", "x":4.5, "y":2.25}, + {"label":"T", "x":5.5, "y":2.25}, + {"label":"Y", "x":6.5, "y":2.25}, + {"label":"U", "x":7.5, "y":2.25}, + {"label":"I", "x":8.5, "y":2.25}, + {"label":"O", "x":9.5, "y":2.25}, + {"label":"P", "x":10.5, "y":2.25}, + {"label":"[{", "x":11.5, "y":2.25}, + {"label":"]}", "x":12.5, "y":2.25}, + {"label":"\\|", "x":13.5, "y":2.25, "w":1.5}, + {"label":"Delete", "x":15.25, "y":2.25}, + {"label":"End", "x":16.25, "y":2.25}, + {"label":"Page Down", "x":17.25, "y":2.25}, + + {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, + {"label":"A", "x":1.75, "y":3.25}, + {"label":"S", "x":2.75, "y":3.25}, + {"label":"D", "x":3.75, "y":3.25}, + {"label":"F", "x":4.75, "y":3.25}, + {"label":"G", "x":5.75, "y":3.25}, + {"label":"H", "x":6.75, "y":3.25}, + {"label":"J", "x":7.75, "y":3.25}, + {"label":"K", "x":8.75, "y":3.25}, + {"label":"L", "x":9.75, "y":3.25}, + {"label":";:", "x":10.75, "y":3.25}, + {"label":"'\"", "x":11.75, "y":3.25}, + {"label":"Enter", "x":12.75, "y":3.25, "w":2.25}, + + {"label":"Shift", "x":0, "y":4.25, "w":2.25}, + {"label":"Z", "x":2.25, "y":4.25}, + {"label":"X", "x":3.25, "y":4.25}, + {"label":"C", "x":4.25, "y":4.25}, + {"label":"V", "x":5.25, "y":4.25}, + {"label":"B", "x":6.25, "y":4.25}, + {"label":"N", "x":7.25, "y":4.25}, + {"label":"M", "x":8.25, "y":4.25}, + {"label":",<", "x":9.25, "y":4.25}, + {"label":".>", "x":10.25, "y":4.25}, + {"label":"/?", "x":11.25, "y":4.25}, + {"label":"Shift", "x":12.25, "y":4.25, "w":2.75}, + {"label":"\u2191", "x":16.25, "y":4.25}, + + {"label":"Ctrl", "x":0, "y":5.25, "w":1.25}, + {"label":"GUI", "x":1.25, "y":5.25, "w":1.25}, + {"label":"Alt", "x":2.5, "y":5.25, "w":1.25}, + {"label":"Space", "x":3.75, "y":5.25, "w":6.25}, + {"label":"Alt", "x":10, "y":5.25, "w":1.25}, + {"label":"GUI", "x":11.25, "y":5.25, "w":1.25}, + {"label":"Menu", "x":12.5, "y":5.25, "w":1.25}, + {"label":"Ctrl", "x":13.75, "y":5.25, "w":1.25}, + {"label":"\u2190", "x":15.25, "y":5.25}, + {"label":"\u2193", "x":16.25, "y":5.25}, + {"label":"\u2192", "x":17.25, "y":5.25} + ] + }, + "LAYOUT_tkl_ansi_tsangan_f13": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":1.25, "y":0}, + {"label":"F2", "x":2.25, "y":0}, + {"label":"F3", "x":3.25, "y":0}, + {"label":"F4", "x":4.25, "y":0}, + {"label":"F5", "x":5.5, "y":0}, + {"label":"F6", "x":6.5, "y":0}, + {"label":"F7", "x":7.5, "y":0}, + {"label":"F8", "x":8.5, "y":0}, + {"label":"F9", "x":9.75, "y":0}, + {"label":"F10", "x":10.75, "y":0}, + {"label":"F11", "x":11.75, "y":0}, + {"label":"F12", "x":12.75, "y":0}, + {"label":"F13", "x":14, "y":0}, + {"label":"Print Screen", "x":15.25, "y":0}, + {"label":"Scroll Lock", "x":16.25, "y":0}, + {"label":"Pause", "x":17.25, "y":0}, + + {"label":"`~", "x":0, "y":1.25}, + {"label":"1!", "x":1, "y":1.25}, + {"label":"2@", "x":2, "y":1.25}, + {"label":"3#", "x":3, "y":1.25}, + {"label":"4$", "x":4, "y":1.25}, + {"label":"5%", "x":5, "y":1.25}, + {"label":"6^", "x":6, "y":1.25}, + {"label":"7&", "x":7, "y":1.25}, + {"label":"8*", "x":8, "y":1.25}, + {"label":"9(", "x":9, "y":1.25}, + {"label":"0)", "x":10, "y":1.25}, + {"label":"-_", "x":11, "y":1.25}, + {"label":"=+", "x":12, "y":1.25}, + {"label":"Backspace", "x":13, "y":1.25, "w":2}, + {"label":"Insert", "x":15.25, "y":1.25}, + {"label":"Home", "x":16.25, "y":1.25}, + {"label":"Page Up", "x":17.25, "y":1.25}, + + {"label":"Tab", "x":0, "y":2.25, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.25}, + {"label":"W", "x":2.5, "y":2.25}, + {"label":"E", "x":3.5, "y":2.25}, + {"label":"R", "x":4.5, "y":2.25}, + {"label":"T", "x":5.5, "y":2.25}, + {"label":"Y", "x":6.5, "y":2.25}, + {"label":"U", "x":7.5, "y":2.25}, + {"label":"I", "x":8.5, "y":2.25}, + {"label":"O", "x":9.5, "y":2.25}, + {"label":"P", "x":10.5, "y":2.25}, + {"label":"[{", "x":11.5, "y":2.25}, + {"label":"]}", "x":12.5, "y":2.25}, + {"label":"\\|", "x":13.5, "y":2.25, "w":1.5}, + {"label":"Delete", "x":15.25, "y":2.25}, + {"label":"End", "x":16.25, "y":2.25}, + {"label":"Page Down", "x":17.25, "y":2.25}, + + {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, + {"label":"A", "x":1.75, "y":3.25}, + {"label":"S", "x":2.75, "y":3.25}, + {"label":"D", "x":3.75, "y":3.25}, + {"label":"F", "x":4.75, "y":3.25}, + {"label":"G", "x":5.75, "y":3.25}, + {"label":"H", "x":6.75, "y":3.25}, + {"label":"J", "x":7.75, "y":3.25}, + {"label":"K", "x":8.75, "y":3.25}, + {"label":"L", "x":9.75, "y":3.25}, + {"label":";:", "x":10.75, "y":3.25}, + {"label":"'\"", "x":11.75, "y":3.25}, + {"label":"Enter", "x":12.75, "y":3.25, "w":2.25}, + + {"label":"Shift", "x":0, "y":4.25, "w":2.25}, + {"label":"Z", "x":2.25, "y":4.25}, + {"label":"X", "x":3.25, "y":4.25}, + {"label":"C", "x":4.25, "y":4.25}, + {"label":"V", "x":5.25, "y":4.25}, + {"label":"B", "x":6.25, "y":4.25}, + {"label":"N", "x":7.25, "y":4.25}, + {"label":"M", "x":8.25, "y":4.25}, + {"label":",<", "x":9.25, "y":4.25}, + {"label":".>", "x":10.25, "y":4.25}, + {"label":"/?", "x":11.25, "y":4.25}, + {"label":"Shift", "x":12.25, "y":4.25, "w":2.75}, + {"label":"\u2191", "x":16.25, "y":4.25}, + + {"label":"Ctrl", "x":0, "y":5.25, "w":1.5}, + {"label":"GUI", "x":1.5, "y":5.25}, + {"label":"Alt", "x":2.5, "y":5.25, "w":1.5}, + {"label":"Space", "x":4, "y":5.25, "w":7}, + {"label":"Alt", "x":11, "y":5.25, "w":1.5}, + {"label":"Menu", "x":12.5, "y":5.25}, + {"label":"Ctrl", "x":13.5, "y":5.25, "w":1.5}, + {"label":"\u2190", "x":15.25, "y":5.25}, + {"label":"\u2193", "x":16.25, "y":5.25}, + {"label":"\u2192", "x":17.25, "y":5.25} + ] + }, + "LAYOUT_tkl_iso_f13": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":1.25, "y":0}, + {"label":"F2", "x":2.25, "y":0}, + {"label":"F3", "x":3.25, "y":0}, + {"label":"F4", "x":4.25, "y":0}, + {"label":"F5", "x":5.5, "y":0}, + {"label":"F6", "x":6.5, "y":0}, + {"label":"F7", "x":7.5, "y":0}, + {"label":"F8", "x":8.5, "y":0}, + {"label":"F9", "x":9.75, "y":0}, + {"label":"F10", "x":10.75, "y":0}, + {"label":"F11", "x":11.75, "y":0}, + {"label":"F12", "x":12.75, "y":0}, + {"label":"F13", "x":14, "y":0}, + {"label":"Print Screen", "x":15.25, "y":0}, + {"label":"Scroll Lock", "x":16.25, "y":0}, + {"label":"Pause", "x":17.25, "y":0}, + + {"label":"`\u00ac", "x":0, "y":1.25}, + {"label":"1!", "x":1, "y":1.25}, + {"label":"2\"", "x":2, "y":1.25}, + {"label":"3\u00a3", "x":3, "y":1.25}, + {"label":"4$", "x":4, "y":1.25}, + {"label":"5%", "x":5, "y":1.25}, + {"label":"6^", "x":6, "y":1.25}, + {"label":"7&", "x":7, "y":1.25}, + {"label":"8*", "x":8, "y":1.25}, + {"label":"9(", "x":9, "y":1.25}, + {"label":"0)", "x":10, "y":1.25}, + {"label":"-_", "x":11, "y":1.25}, + {"label":"=+", "x":12, "y":1.25}, + {"label":"Backspace", "x":13, "y":1.25, "w":2}, + {"label":"Insert", "x":15.25, "y":1.25}, + {"label":"Home", "x":16.25, "y":1.25}, + {"label":"Page Up", "x":17.25, "y":1.25}, + + {"label":"Tab", "x":0, "y":2.25, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.25}, + {"label":"W", "x":2.5, "y":2.25}, + {"label":"E", "x":3.5, "y":2.25}, + {"label":"R", "x":4.5, "y":2.25}, + {"label":"T", "x":5.5, "y":2.25}, + {"label":"Y", "x":6.5, "y":2.25}, + {"label":"U", "x":7.5, "y":2.25}, + {"label":"I", "x":8.5, "y":2.25}, + {"label":"O", "x":9.5, "y":2.25}, + {"label":"P", "x":10.5, "y":2.25}, + {"label":"[{", "x":11.5, "y":2.25}, + {"label":"]}", "x":12.5, "y":2.25}, + {"label":"Delete", "x":15.25, "y":2.25}, + {"label":"End", "x":16.25, "y":2.25}, + {"label":"Page Down", "x":17.25, "y":2.25}, + + {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, + {"label":"A", "x":1.75, "y":3.25}, + {"label":"S", "x":2.75, "y":3.25}, + {"label":"D", "x":3.75, "y":3.25}, + {"label":"F", "x":4.75, "y":3.25}, + {"label":"G", "x":5.75, "y":3.25}, + {"label":"H", "x":6.75, "y":3.25}, + {"label":"J", "x":7.75, "y":3.25}, + {"label":"K", "x":8.75, "y":3.25}, + {"label":"L", "x":9.75, "y":3.25}, + {"label":";:", "x":10.75, "y":3.25}, + {"label":"'@", "x":11.75, "y":3.25}, + {"label":"#~", "x":12.75, "y":3.25}, + {"label":"Enter", "x":13.75, "y":2.25, "w":1.25, "h":2}, + + {"label":"Shift", "x":0, "y":4.25, "w":1.25}, + {"label":"\\|", "x":1.25, "y":4.25}, + {"label":"Z", "x":2.25, "y":4.25}, + {"label":"X", "x":3.25, "y":4.25}, + {"label":"C", "x":4.25, "y":4.25}, + {"label":"V", "x":5.25, "y":4.25}, + {"label":"B", "x":6.25, "y":4.25}, + {"label":"N", "x":7.25, "y":4.25}, + {"label":"M", "x":8.25, "y":4.25}, + {"label":",<", "x":9.25, "y":4.25}, + {"label":".>", "x":10.25, "y":4.25}, + {"label":"/?", "x":11.25, "y":4.25}, + {"label":"Shift", "x":12.25, "y":4.25, "w":2.75}, + {"label":"\u2191", "x":16.25, "y":4.25}, + + {"label":"Ctrl", "x":0, "y":5.25, "w":1.25}, + {"label":"GUI", "x":1.25, "y":5.25, "w":1.25}, + {"label":"Alt", "x":2.5, "y":5.25, "w":1.25}, + {"label":"Space", "x":3.75, "y":5.25, "w":6.25}, + {"label":"Alt", "x":10, "y":5.25, "w":1.25}, + {"label":"GUI", "x":11.25, "y":5.25, "w":1.25}, + {"label":"Menu", "x":12.5, "y":5.25, "w":1.25}, + {"label":"Ctrl", "x":13.75, "y":5.25, "w":1.25}, + {"label":"\u2190", "x":15.25, "y":5.25}, + {"label":"\u2193", "x":16.25, "y":5.25}, + {"label":"\u2192", "x":17.25, "y":5.25} + ] + }, + "LAYOUT_tkl_iso_tsangan_f13": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":1.25, "y":0}, + {"label":"F2", "x":2.25, "y":0}, + {"label":"F3", "x":3.25, "y":0}, + {"label":"F4", "x":4.25, "y":0}, + {"label":"F5", "x":5.5, "y":0}, + {"label":"F6", "x":6.5, "y":0}, + {"label":"F7", "x":7.5, "y":0}, + {"label":"F8", "x":8.5, "y":0}, + {"label":"F9", "x":9.75, "y":0}, + {"label":"F10", "x":10.75, "y":0}, + {"label":"F11", "x":11.75, "y":0}, + {"label":"F12", "x":12.75, "y":0}, + {"label":"F13", "x":14, "y":0}, + {"label":"Print Screen", "x":15.25, "y":0}, + {"label":"Scroll Lock", "x":16.25, "y":0}, + {"label":"Pause", "x":17.25, "y":0}, + + {"label":"`\u00ac", "x":0, "y":1.25}, + {"label":"1!", "x":1, "y":1.25}, + {"label":"2\"", "x":2, "y":1.25}, + {"label":"3\u00a3", "x":3, "y":1.25}, + {"label":"4$", "x":4, "y":1.25}, + {"label":"5%", "x":5, "y":1.25}, + {"label":"6^", "x":6, "y":1.25}, + {"label":"7&", "x":7, "y":1.25}, + {"label":"8*", "x":8, "y":1.25}, + {"label":"9(", "x":9, "y":1.25}, + {"label":"0)", "x":10, "y":1.25}, + {"label":"-_", "x":11, "y":1.25}, + {"label":"=+", "x":12, "y":1.25}, + {"label":"Backspace", "x":13, "y":1.25, "w":2}, + {"label":"Insert", "x":15.25, "y":1.25}, + {"label":"Home", "x":16.25, "y":1.25}, + {"label":"Page Up", "x":17.25, "y":1.25}, + + {"label":"Tab", "x":0, "y":2.25, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.25}, + {"label":"W", "x":2.5, "y":2.25}, + {"label":"E", "x":3.5, "y":2.25}, + {"label":"R", "x":4.5, "y":2.25}, + {"label":"T", "x":5.5, "y":2.25}, + {"label":"Y", "x":6.5, "y":2.25}, + {"label":"U", "x":7.5, "y":2.25}, + {"label":"I", "x":8.5, "y":2.25}, + {"label":"O", "x":9.5, "y":2.25}, + {"label":"P", "x":10.5, "y":2.25}, + {"label":"[{", "x":11.5, "y":2.25}, + {"label":"]}", "x":12.5, "y":2.25}, + {"label":"Delete", "x":15.25, "y":2.25}, + {"label":"End", "x":16.25, "y":2.25}, + {"label":"Page Down", "x":17.25, "y":2.25}, + + {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, + {"label":"A", "x":1.75, "y":3.25}, + {"label":"S", "x":2.75, "y":3.25}, + {"label":"D", "x":3.75, "y":3.25}, + {"label":"F", "x":4.75, "y":3.25}, + {"label":"G", "x":5.75, "y":3.25}, + {"label":"H", "x":6.75, "y":3.25}, + {"label":"J", "x":7.75, "y":3.25}, + {"label":"K", "x":8.75, "y":3.25}, + {"label":"L", "x":9.75, "y":3.25}, + {"label":";:", "x":10.75, "y":3.25}, + {"label":"'@", "x":11.75, "y":3.25}, + {"label":"#~", "x":12.75, "y":3.25}, + {"label":"Enter", "x":13.75, "y":2.25, "w":1.25, "h":2}, + + {"label":"Shift", "x":0, "y":4.25, "w":1.25}, + {"label":"\\|", "x":1.25, "y":4.25}, + {"label":"Z", "x":2.25, "y":4.25}, + {"label":"X", "x":3.25, "y":4.25}, + {"label":"C", "x":4.25, "y":4.25}, + {"label":"V", "x":5.25, "y":4.25}, + {"label":"B", "x":6.25, "y":4.25}, + {"label":"N", "x":7.25, "y":4.25}, + {"label":"M", "x":8.25, "y":4.25}, + {"label":",<", "x":9.25, "y":4.25}, + {"label":".>", "x":10.25, "y":4.25}, + {"label":"/?", "x":11.25, "y":4.25}, + {"label":"Shift", "x":12.25, "y":4.25, "w":2.75}, + {"label":"\u2191", "x":16.25, "y":4.25}, + + {"label":"Ctrl", "x":0, "y":5.25, "w":1.5}, + {"label":"GUI", "x":1.5, "y":5.25}, + {"label":"Alt", "x":2.5, "y":5.25, "w":1.5}, + {"label":"Space", "x":4, "y":5.25, "w":7}, + {"label":"Alt", "x":11, "y":5.25, "w":1.5}, + {"label":"Menu", "x":12.5, "y":5.25}, + {"label":"Ctrl", "x":13.5, "y":5.25, "w":1.5}, + {"label":"\u2190", "x":15.25, "y":5.25}, + {"label":"\u2193", "x":16.25, "y":5.25}, + {"label":"\u2192", "x":17.25, "y":5.25} ] } } -} \ No newline at end of file +} diff --git a/keyboards/kopibeng/mnk88/mnk88.h b/keyboards/kopibeng/mnk88/mnk88.h index 4fabf95df1..5bec9d1634 100644 --- a/keyboards/kopibeng/mnk88/mnk88.h +++ b/keyboards/kopibeng/mnk88/mnk88.h @@ -18,22 +18,104 @@ #include "quantum.h" -#define ____ KC_NO - +#define ___ KC_NO +/* + * ┌───┐┌───┬───┬───┬───┐┌───┬───┬───┬───┐┌───┬───┬───┬───┐┌───┐┌───┬───┬───┐ + * │00 ││01 │02 │03 │04 ││05 │06 │07 │08 ││09 │0A │0B │0C ││0D ││0E │0F │0G │ + * └───┘└───┴───┴───┴───┘└───┴───┴───┴───┘└───┴───┴───┴───┘└───┘└───┴───┴───┘ + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐┌───┬───┬───┐ ┌───────┐ + * │10 │11 │12 │13 │14 │15 │16 │17 │18 │19 │1A │1B │1C │2C │1D ││1E │1F │1G │ │1D │ 2u Backspace + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤├───┼───┼───┤ └─┬─────┤ + * │20 │21 │22 │23 │24 │25 │26 │27 │28 │29 │2A │2B │3C │2D ││2E │2F │2G │ │ │ + * 2.25u ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤└───┴───┴───┘ ┌──┴┐2D │ ISO Enter + * LShift │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3A │3B │3D │ │3D │ │ + * ┌────────┐ ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤ ┌───┐ ┌─┴───┴────┤ + * │40 │ │40 │41 │42 │43 │44 │45 │46 │47 │48 │49 │4A │4B │4C │4D │ │4F │ │4C │ 2.75u RShift + * └────────┘ ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬┴───┤┌───┼───┼───┐ └──────────┘ + * │50 │51 │52 │56 │5A │5B │5C │5D ││5E │5F │4G │ + * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘└───┴───┴───┘ + * ┌─────┬───┬─────┬───────────────────────────┬─────┬───┬─────┐ + * │50 │51 │52 │56 │5B │5C │5D │ Tsangan/WKL + * └─────┴───┴─────┴───────────────────────────┴─────┴───┴─────┘ + */ #define LAYOUT_all( \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K212, K113, K114, K115, K116, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K312, K213, K214, K215, K216, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, \ - K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K415, \ - K500, K501, K502, K506, K510, K511, K512, K513, K514, K515, K416 \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K2C, K1D, K1E, K1F, K1G, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K3C, K2D, K2E, K2F, K2G, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \ + K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4F, \ + K50, K51, K52, K56, K5A, K5B, K5C, K5D, K5E, K5F, K4G \ +) { \ + {K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G}, \ + {K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G}, \ + {K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G}, \ + {K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, ___, ___, ___}, \ + {K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, ___, K4F, K4G}, \ + {K50, K51, K52, ___, ___, ___, K56, ___, ___, ___, K5A, K5B, K5C, K5D, K5E, K5F, ___} \ +} + +#define LAYOUT_tkl_ansi_f13( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K3C, K2D, K2E, K2F, K2G, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \ + K40, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4F, \ + K50, K51, K52, K56, K5A, K5B, K5C, K5D, K5E, K5F, K4G \ +) { \ + {K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G}, \ + {K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G}, \ + {K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, ___, K2D, K2E, K2F, K2G}, \ + {K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, ___, ___, ___}, \ + {K40, ___, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, ___, ___, K4F, K4G}, \ + {K50, K51, K52, ___, ___, ___, K56, ___, ___, ___, K5A, K5B, K5C, K5D, K5E, K5F, ___} \ +} + +#define LAYOUT_tkl_ansi_tsangan_f13( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K3C, K2D, K2E, K2F, K2G, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \ + K40, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4F, \ + K50, K51, K52, K56, K5B, K5C, K5D, K5E, K5F, K4G \ +) { \ + {K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G}, \ + {K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G}, \ + {K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, ___, K2D, K2E, K2F, K2G}, \ + {K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, ___, ___, ___}, \ + {K40, ___, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, ___, ___, K4F, K4G}, \ + {K50, K51, K52, ___, ___, ___, K56, ___, ___, ___, ___, K5B, K5C, K5D, K5E, K5F, ___} \ +} + +#define LAYOUT_tkl_iso_f13( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K3C, K2E, K2F, K2G, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K2D, \ + K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4F, \ + K50, K51, K52, K56, K5A, K5B, K5C, K5D, K5E, K5F, K4G \ +) { \ + {K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G}, \ + {K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G}, \ + {K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, ___, K2D, K2E, K2F, K2G}, \ + {K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, ___, ___, ___}, \ + {K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, ___, ___, K4F, K4G}, \ + {K50, K51, K52, ___, ___, ___, K56, ___, ___, ___, K5A, K5B, K5C, K5D, K5E, K5F, ___} \ +} + +#define LAYOUT_tkl_iso_tsangan_f13( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K3C, K2E, K2F, K2G, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K2D, \ + K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4F, \ + K50, K51, K52, K56, K5B, K5C, K5D, K5E, K5F, K4G \ ) { \ - {K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016}, \ - {K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116}, \ - {K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216}, \ - {K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, ____, ____, ____}, \ - {K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, ____, K415, K416}, \ - {K500, K501, K502, ____, ____, ____, K506, ____, ____, ____, K510, K511, K512, K513, K514, K515, ____} \ + {K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G}, \ + {K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G}, \ + {K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, ___, K2D, K2E, K2F, K2G}, \ + {K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, ___, ___, ___}, \ + {K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, ___, ___, K4F, K4G}, \ + {K50, K51, K52, ___, ___, ___, K56, ___, ___, ___, ___, K5B, K5C, K5D, K5E, K5F, ___} \ } From bc51e330c0c183e78e415b6cfbf475990eb1ba86 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Wed, 13 Oct 2021 05:47:54 +0000 Subject: [PATCH 271/595] Lucid Alexa layout macro rework (#14799) * refactor keymaps for readability - use QMK-native keycode aliases - physically align keycodes * rework layout macro A discrepancy between the default and via keymaps prompted a deep dive into the keyboard's switch matrix, which led to the discovery that (1) the layout macro's arguments were not arranged physically, and (2) the keymaps didn't assign the keycodes to the same switches (the default keymap's keycodes were in the wrong sequence). Additionally, the layout macro was built to support a split Backspace, but named as if it were for a 2u Backspace, which broke the enabled support for Community Layout keymaps. This commit: - arranges the layout macro arguments according to physical order - corrects the keymaps - renames the layout macro to specify the split Backspace - disables Community Layout support - updates the `info.json` data * add LAYOUT_65_ansi_blocker * enable Community Layout support * update `info.json` metadata - use full product listing URL - use GitHub username for maintainer field * update readme - fix vendor link in lead paragraph - update metadata list - use GitHub username of keyboard maintainer - correct Supported Hardware - add Hardware Availability link - add flashing and bootloader instructions --- keyboards/lucid/alexa/alexa.h | 46 +++- keyboards/lucid/alexa/info.json | 215 ++++++++++++------ .../lucid/alexa/keymaps/default/keymap.c | 27 ++- keyboards/lucid/alexa/keymaps/via/keymap.c | 54 ++--- keyboards/lucid/alexa/readme.md | 18 +- keyboards/lucid/alexa/rules.mk | 2 +- 6 files changed, 236 insertions(+), 126 deletions(-) diff --git a/keyboards/lucid/alexa/alexa.h b/keyboards/lucid/alexa/alexa.h index 3c6f9d4ace..9fd221fcea 100644 --- a/keyboards/lucid/alexa/alexa.h +++ b/keyboards/lucid/alexa/alexa.h @@ -16,17 +16,45 @@ along with this program. If not, see . #include "quantum.h" -/* Alexa Keymap Definitions */ +#define ___ KC_NO + +/* ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ ┌───────┐ + * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0A │0B │0C │0D │2D │0E │ │0D │ 2u Backspace + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┤ └───────┘ + * │10 │11 │12 │13 │14 │15 │16 │17 │18 │19 │1A │1B │1C │1D │1E │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤ + * │20 │21 │22 │23 │24 │25 │26 │27 │28 │29 │2A │2B │2C │2E │ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤ + * │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3A │3B │3D │3E │ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤ + * │40 │41 │42 │45 │49 │4A │ │4C │4D │4E │ + * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘ + */ + +#define LAYOUT_65_ansi_blocker_split_bs( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2E, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3E, \ + K40, K41, K42, K45, K49, K4A, K4C, K4D, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, ___, K3D, K3E }, \ + { K40, K41, K42, ___, ___, K45, ___, ___, ___, K49, K4A, ___, K4C, K4D, K4E } \ +} + #define LAYOUT_65_ansi_blocker( \ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3E, \ - K40, K41, K42, K45, K49, K4A, K4C, K4D, K4E \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2E, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3E, \ + K40, K41, K42, K45, K49, K4A, K4C, K4D, K4E \ ) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, KC_NO, K3D, K3E }, \ - { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, K49, K4A, KC_NO, K4C, K4D, K4E } \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, ___, K2E }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, ___, K3D, K3E }, \ + { K40, K41, K42, ___, ___, K45, ___, ___, ___, K49, K4A, ___, K4C, K4D, K4E } \ } diff --git a/keyboards/lucid/alexa/info.json b/keyboards/lucid/alexa/info.json index b00d1c15b6..91c3836444 100644 --- a/keyboards/lucid/alexa/info.json +++ b/keyboards/lucid/alexa/info.json @@ -1,82 +1,157 @@ { "keyboard_name": "Alexa", - "url": "http://www.makerkeyboards.com", - "maintainer": "Maker Keyboards", + "url": "https://www.makerkeyboards.com/products/alexa", + "maintainer": "mrnoisytiger", "layouts": { + "LAYOUT_65_ansi_blocker_split_bs": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"1!", "x":1, "y":0}, + {"label":"2@", "x":2, "y":0}, + {"label":"3#", "x":3, "y":0}, + {"label":"4$", "x":4, "y":0}, + {"label":"5%", "x":5, "y":0}, + {"label":"6^", "x":6, "y":0}, + {"label":"7&", "x":7, "y":0}, + {"label":"8*", "x":8, "y":0}, + {"label":"9(", "x":9, "y":0}, + {"label":"0)", "x":10, "y":0}, + {"label":"-_", "x":11, "y":0}, + {"label":"=+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0}, + {"label":"Delete", "x":14, "y":0}, + {"label":"Home", "x":15, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[{", "x":11.5, "y":1}, + {"label":"]}", "x":12.5, "y":1}, + {"label":"\\|", "x":13.5, "y":1, "w":1.5}, + {"label":"PgUp", "x":15, "y":1}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";:", "x":10.75, "y":2}, + {"label":"\"'", "x":11.75, "y":2}, + {"label":"Enter", "x":12.75, "y":2, "w":2.25}, + {"label":"PgDn", "x":15, "y":2}, + + {"label":"Shift", "x":0, "y":3, "w":2.25}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",<", "x":9.25, "y":3}, + {"label":".>", "x":10.25, "y":3}, + {"label":"/?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"\u2191", "x":14, "y":3}, + {"label":"End", "x":15, "y":3}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"GUI", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"label":"Space", "x":3.75, "y":4, "w":6.25}, + {"label":"Alt", "x":10, "y":4, "w":1.25}, + {"label":"Fn", "x":11.25, "y":4, "w":1.25}, + {"label":"\u2190", "x":13, "y":4}, + {"label":"\u2193", "x":14, "y":4}, + {"label":"\u2192", "x":15, "y":4} + ] + }, "LAYOUT_65_ansi_blocker": { "layout": [ - {"x": 0, "y": 0}, - {"x": 1, "y": 0}, - {"x": 2, "y": 0}, - {"x": 3, "y": 0}, - {"x": 4, "y": 0}, - {"x": 5, "y": 0}, - {"x": 6, "y": 0}, - {"x": 7, "y": 0}, - {"x": 8, "y": 0}, - {"x": 9, "y": 0}, - {"x": 10, "y": 0}, - {"x": 11, "y": 0}, - {"x": 12, "y": 0}, - {"x": 13, "y": 0}, - {"x": 14, "y": 0}, - {"x": 15, "y": 0}, + {"label":"Esc", "x":0, "y":0}, + {"label":"1!", "x":1, "y":0}, + {"label":"2@", "x":2, "y":0}, + {"label":"3#", "x":3, "y":0}, + {"label":"4$", "x":4, "y":0}, + {"label":"5%", "x":5, "y":0}, + {"label":"6^", "x":6, "y":0}, + {"label":"7&", "x":7, "y":0}, + {"label":"8*", "x":8, "y":0}, + {"label":"9(", "x":9, "y":0}, + {"label":"0)", "x":10, "y":0}, + {"label":"-_", "x":11, "y":0}, + {"label":"=+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0, "w":2}, + {"label":"Home", "x":15, "y":0}, - {"x": 0, "y": 1, "w": 1.5}, - {"x": 1.5, "y": 1}, - {"x": 2.5, "y": 1}, - {"x": 3.5, "y": 1}, - {"x": 4.5, "y": 1}, - {"x": 5.5, "y": 1}, - {"x": 6.5, "y": 1}, - {"x": 7.5, "y": 1}, - {"x": 8.5, "y": 1}, - {"x": 9.5, "y": 1}, - {"x": 10.5, "y": 1}, - {"x": 11.5, "y": 1}, - {"x": 12.5, "y": 1}, - {"x": 13.5, "y": 1, "w": 1.5}, - {"x": 15, "y": 1}, + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[{", "x":11.5, "y":1}, + {"label":"]}", "x":12.5, "y":1}, + {"label":"\\|", "x":13.5, "y":1, "w":1.5}, + {"label":"PgUp", "x":15, "y":1}, - {"x": 0, "y": 2, "w": 1.75}, - {"x": 1.75, "y": 2}, - {"x": 2.75, "y": 2}, - {"x": 3.75, "y": 2}, - {"x": 4.75, "y": 2}, - {"x": 5.75, "y": 2}, - {"x": 6.75, "y": 2}, - {"x": 7.75, "y": 2}, - {"x": 8.75, "y": 2}, - {"x": 9.75, "y": 2}, - {"x": 10.75, "y": 2}, - {"x": 11.75, "y": 2}, - {"x": 12.75, "y": 2, "w": 2.25}, - {"x": 15, "y": 2}, + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";:", "x":10.75, "y":2}, + {"label":"\"'", "x":11.75, "y":2}, + {"label":"Enter", "x":12.75, "y":2, "w":2.25}, + {"label":"PgDn", "x":15, "y":2}, - {"x": 0, "y": 3, "w": 2.25}, - {"x": 2.25, "y": 3}, - {"x": 3.25, "y": 3}, - {"x": 4.25, "y": 3}, - {"x": 5.25, "y": 3}, - {"x": 6.25, "y": 3}, - {"x": 7.25, "y": 3}, - {"x": 8.25, "y": 3}, - {"x": 9.25, "y": 3}, - {"x": 10.25, "y": 3}, - {"x": 11.25, "y": 3}, - {"x": 12.25, "y": 3, "w": 1.75}, - {"x": 14, "y": 3}, - {"x": 15, "y": 3}, + {"label":"Shift", "x":0, "y":3, "w":2.25}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",<", "x":9.25, "y":3}, + {"label":".>", "x":10.25, "y":3}, + {"label":"/?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"\u2191", "x":14, "y":3}, + {"label":"End", "x":15, "y":3}, - {"x": 0, "y": 4, "w": 1.25}, - {"x": 1.25, "y": 4, "w": 1.25}, - {"x": 2.5, "y": 4, "w": 1.25}, - {"x": 3.75, "y": 4, "w": 6.25}, - {"x": 10, "y": 4, "w": 1.25}, - {"x": 11.25, "y": 4, "w": 1.25}, - {"x": 13, "y": 4}, - {"x": 14, "y": 4}, - {"x": 15, "y": 4} + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"GUI", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"label":"Space", "x":3.75, "y":4, "w":6.25}, + {"label":"Alt", "x":10, "y":4, "w":1.25}, + {"label":"Fn", "x":11.25, "y":4, "w":1.25}, + {"label":"\u2190", "x":13, "y":4}, + {"label":"\u2193", "x":14, "y":4}, + {"label":"\u2192", "x":15, "y":4} ] } } diff --git a/keyboards/lucid/alexa/keymaps/default/keymap.c b/keyboards/lucid/alexa/keymaps/default/keymap.c index 6faf5102e6..29efe094f5 100644 --- a/keyboards/lucid/alexa/keymaps/default/keymap.c +++ b/keyboards/lucid/alexa/keymaps/default/keymap.c @@ -21,19 +21,18 @@ enum layers { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_LAYER0] = LAYOUT_65_ansi_blocker( - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_HOME, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, - KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + [_LAYER0] = LAYOUT_65_ansi_blocker_split_bs( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + [_LAYER1] = LAYOUT_65_ansi_blocker_split_bs( + KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, RESET, KC_PGUP, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, NK_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, KC_MUTE, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT ), - - [_LAYER1] = LAYOUT_65_ansi_blocker( - KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUSE, RESET, KC_PGUP, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, NK_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_AUDIO_VOL_UP, KC_AUDIO_MUTE, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MEDIA_PREV_TRACK, KC_AUDIO_VOL_DOWN, KC_MEDIA_NEXT_TRACK - ) }; diff --git a/keyboards/lucid/alexa/keymaps/via/keymap.c b/keyboards/lucid/alexa/keymaps/via/keymap.c index 1574c802de..8cfb97af10 100644 --- a/keyboards/lucid/alexa/keymaps/via/keymap.c +++ b/keyboards/lucid/alexa/keymaps/via/keymap.c @@ -23,36 +23,32 @@ enum layers { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_LAYER0] = LAYOUT_65_ansi_blocker( - KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_DEL,KC_PGDN, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, - KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + [_LAYER0] = LAYOUT_65_ansi_blocker_split_bs( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT ), - - [_LAYER1] = LAYOUT_65_ansi_blocker( - KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUSE, RESET, KC_PGUP, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, NK_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_AUDIO_VOL_UP, KC_AUDIO_MUTE, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MEDIA_PREV_TRACK, KC_AUDIO_VOL_DOWN, KC_MEDIA_NEXT_TRACK + [_LAYER1] = LAYOUT_65_ansi_blocker_split_bs( + KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, RESET, KC_PGUP, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGDN, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, NK_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, KC_MUTE, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT ), - - [_LAYER2] = LAYOUT_65_ansi_blocker( - KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + [_LAYER2] = LAYOUT_65_ansi_blocker_split_bs( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), - - [_LAYER3] = LAYOUT_65_ansi_blocker( - KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ), - + [_LAYER3] = LAYOUT_65_ansi_blocker_split_bs( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) }; diff --git a/keyboards/lucid/alexa/readme.md b/keyboards/lucid/alexa/readme.md index 70142271a1..a0cef72913 100644 --- a/keyboards/lucid/alexa/readme.md +++ b/keyboards/lucid/alexa/readme.md @@ -1,13 +1,25 @@ # Alexa Hotswap PCB by Maker Keyboards -The following is the QMK Firmware for the Alexa Hotswap PCB for [MakerKeyboards](http://www.makerkeyboards.cm). +The following is the QMK Firmware for the Alexa Hotswap PCB for [Maker Keyboards](https://www.makerkeyboards.com/). --- -* Keyboard Maintainer: Maker Keyboards -* Hardware Supported: Phantom +* Keyboard Maintainer: [mrnoisytiger](https://github.com/mrnoisytiger) +* Hardware Supported: Alexa Hotswap PCB (ATmega32U4) +* Hardware Availability: [Maker Keyboards](https://www.makerkeyboards.com/products/alexa) Make example for this keyboard (after setting up your build environment): make lucid/alexa:default +Flashing example for this keyboard: + + make lucid/alexa:default:flash + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the top left key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Keycode in layout**: Press the key mapped to `RESET` if it is available (Fn+Backslash by default) + See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/lucid/alexa/rules.mk b/keyboards/lucid/alexa/rules.mk index b1d63c6822..16bcdf2cfc 100644 --- a/keyboards/lucid/alexa/rules.mk +++ b/keyboards/lucid/alexa/rules.mk @@ -24,4 +24,4 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output KEYBOARD_LOCK_ENABLE = yes -LAYOUTS = 65_ansi_blocker +LAYOUTS = 65_ansi_blocker 65_ansi_blocker_split_bs From ec3236594407c27e9b8b323428de9c9c0af09681 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Wed, 13 Oct 2021 06:50:04 +0000 Subject: [PATCH 272/595] Kopibeng MNK88 Patch (#14807) * refactor default keymap - correct keycode sequence (`KC_RGHT` was in the wrong place) - change tabs to spaces (four-space indent) - update grid alignment * refactor via keymap - change tabs to spaces (four-space indent) - update grid alignment --- .../kopibeng/mnk88/keymaps/default/keymap.c | 76 +++++++++---------- keyboards/kopibeng/mnk88/keymaps/via/keymap.c | 76 +++++++++---------- 2 files changed, 76 insertions(+), 76 deletions(-) diff --git a/keyboards/kopibeng/mnk88/keymaps/default/keymap.c b/keyboards/kopibeng/mnk88/keymaps/default/keymap.c index 407daa0988..eb3748e277 100644 --- a/keyboards/kopibeng/mnk88/keymaps/default/keymap.c +++ b/keyboards/kopibeng/mnk88/keymaps/default/keymap.c @@ -18,44 +18,44 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - // Default layer - [0] = LAYOUT_all( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(2), KC_UP, KC_RGHT, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN - ), + // Default layer + [0] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(2), KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), - // Fn1 Layer - [1] = LAYOUT_all( - KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_VOLU, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_MNXT, KC_VOLD, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ), + // Fn1 Layer + [1] = LAYOUT_all( + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_VOLU, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_MNXT, KC_VOLD, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), - // Fn2 Layer - [2] = LAYOUT_all( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ), - - // Fn3 Layer - [3] = LAYOUT_all( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ), -}; + // Fn2 Layer + [2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + // Fn3 Layer + [3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), +}; diff --git a/keyboards/kopibeng/mnk88/keymaps/via/keymap.c b/keyboards/kopibeng/mnk88/keymaps/via/keymap.c index 0fa17b2d08..eb3748e277 100644 --- a/keyboards/kopibeng/mnk88/keymaps/via/keymap.c +++ b/keyboards/kopibeng/mnk88/keymaps/via/keymap.c @@ -18,44 +18,44 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - // Default layer - [0] = LAYOUT_all( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(2), KC_UP, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT - ), + // Default layer + [0] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(2), KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), - // Fn1 Layer - [1] = LAYOUT_all( - KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_VOLU, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_MNXT, KC_VOLD, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ), + // Fn1 Layer + [1] = LAYOUT_all( + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI, RGB_VAD, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_VOLU, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_MNXT, KC_VOLD, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), - // Fn2 Layer - [2] = LAYOUT_all( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ), - - // Fn3 Layer - [3] = LAYOUT_all( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ), -}; + // Fn2 Layer + [2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + // Fn3 Layer + [3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), +}; From 04cf161aa01fd433b5dae69d9fd31569ed5dca59 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Wed, 13 Oct 2021 08:56:48 +0000 Subject: [PATCH 273/595] maxr1998/pulse4k: use layout macros in keymaps (#14808) --- keyboards/maxr1998/pulse4k/keymaps/default/keymap.c | 8 ++++---- keyboards/maxr1998/pulse4k/keymaps/maxr1998/keymap.c | 8 ++++---- 2 files changed, 8 insertions(+), 8 deletions(-) diff --git a/keyboards/maxr1998/pulse4k/keymaps/default/keymap.c b/keyboards/maxr1998/pulse4k/keymaps/default/keymap.c index e33dcad218..1ed4b5f1af 100644 --- a/keyboards/maxr1998/pulse4k/keymaps/default/keymap.c +++ b/keyboards/maxr1998/pulse4k/keymaps/default/keymap.c @@ -24,8 +24,8 @@ enum layers { const uint16_t PROGMEM led_adjust_combo[] = {KC_LEFT, KC_RGHT, COMBO_END}; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [DEFAULT] = { - { KC_END, KC_UP, KC_MUTE }, - { KC_LEFT, KC_DOWN, KC_RGHT } - } + [DEFAULT] = LAYOUT( + KC_END, KC_UP, KC_MUTE, + KC_LEFT, KC_DOWN, KC_RGHT + ) }; diff --git a/keyboards/maxr1998/pulse4k/keymaps/maxr1998/keymap.c b/keyboards/maxr1998/pulse4k/keymaps/maxr1998/keymap.c index 4ef9779010..9eec3f0ae7 100644 --- a/keyboards/maxr1998/pulse4k/keymaps/maxr1998/keymap.c +++ b/keyboards/maxr1998/pulse4k/keymaps/maxr1998/keymap.c @@ -24,10 +24,10 @@ enum layers { const uint16_t PROGMEM led_adjust_combo[] = {KC_F22, KC_F24, COMBO_END}; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [DEFAULT] = { - { KC_F20, KC_F21, KC_MUTE }, - { KC_F22, KC_F23, KC_F24 } - } + [DEFAULT] = LAYOUT( + KC_F20, KC_F21, KC_MUTE, + KC_F22, KC_F23, KC_F24 + ) }; void encoder_one_update(bool clockwise) { From f9f3a11c2076f6fc378beb8ccbc8500fb060fcf3 Mon Sep 17 00:00:00 2001 From: Sergey Vlasov Date: Thu, 14 Oct 2021 16:41:30 +0300 Subject: [PATCH 274/595] contra, fractal: Remove wrongly copypasted pin E6 manipulation code (#14818) Apparently the default keymaps for `contra` and `fractal` were derived from some `planck` keymap which contained code to control the status LED in the implementation of the `BACKLIT` custom keycode. Unfortunately, the code to control the LED manipulated the `E6` pin directly, and it was copied without changes, but the `contra` and `fractal` boards use the `E6` pin in the matrix, therefore pressing the key mapped to `BACKLIT` resulted in phantom keypresses for all keys in the corresponding column. --- keyboards/contra/keymaps/default/keymap.c | 2 -- keyboards/fractal/keymaps/default/keymap.c | 2 -- 2 files changed, 4 deletions(-) diff --git a/keyboards/contra/keymaps/default/keymap.c b/keyboards/contra/keymaps/default/keymap.c index 31e90ed267..6a653d9cec 100644 --- a/keyboards/contra/keymaps/default/keymap.c +++ b/keyboards/contra/keymaps/default/keymap.c @@ -222,10 +222,8 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { #ifdef BACKLIGHT_ENABLE backlight_step(); #endif - PORTE &= ~(1<<6); } else { unregister_code(KC_RSFT); - PORTE |= (1<<6); } return false; break; diff --git a/keyboards/fractal/keymaps/default/keymap.c b/keyboards/fractal/keymaps/default/keymap.c index 8bb1f98318..553dad034c 100644 --- a/keyboards/fractal/keymaps/default/keymap.c +++ b/keyboards/fractal/keymaps/default/keymap.c @@ -213,10 +213,8 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { #ifdef BACKLIGHT_ENABLE backlight_step(); #endif - PORTE &= ~(1<<6); } else { unregister_code(KC_RSFT); - PORTE |= (1<<6); } return false; break; From b8de20f1e2bc2693f2dbf8f219a16eb8064120e9 Mon Sep 17 00:00:00 2001 From: Steven Karrmann Date: Thu, 14 Oct 2021 09:47:29 -0400 Subject: [PATCH 275/595] Add KC_BSLS key to Horizon keyboard default layout (#14815) * Define Horizon keyboard * Set indentation according to QMK coding convention * Update horizon keyboard readme to satisfy current QMK template * Use row-column order in horizon readme * Update keyboards/horizon/rules.mk Co-authored-by: Drashna Jaelre * Update keyboards/horizon/rules.mk Co-authored-by: Drashna Jaelre * Update keyboards/horizon/rules.mk Co-authored-by: Drashna Jaelre * Update keyboards/horizon/rules.mk Co-authored-by: Ryan * Update keyboards/horizon/rules.mk Co-authored-by: Ryan * Update keyboards/horizon/rules.mk Co-authored-by: Ryan * Update keyboards/horizon/info.json Co-authored-by: Ryan * Update keyboards/horizon/info.json Co-authored-by: Ryan * Add KC_BSLS to Horizon default keymap Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- keyboards/horizon/keymaps/default/keymap.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/keyboards/horizon/keymaps/default/keymap.c b/keyboards/horizon/keymaps/default/keymap.c index b7581db2c3..29a9bec0d8 100644 --- a/keyboards/horizon/keymaps/default/keymap.c +++ b/keyboards/horizon/keymaps/default/keymap.c @@ -34,14 +34,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), [_SYMBOL] = LAYOUT( KC_TILD, KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , KC_UNDS, - KC_PLUS, KC_EXLM, KC_LPRN, KC_RPRN, KC_DLR , KC_AMPR, KC_PIPE, KC_EQL , KC_LCBR, KC_RCBR, KC_COLN, KC_DQUO, - _______, KC_AT , KC_LBRC, KC_RBRC, KC_HASH, KC_PERC, _______, _______, KC_CIRC, KC_ASTR, KC_LABK, KC_RABK, KC_QUES, _______, + KC_PLUS, KC_EXLM, KC_LPRN, KC_RPRN, KC_DLR , KC_AMPR, KC_PIPE, KC_HASH, KC_LCBR, KC_RCBR, KC_COLN, KC_DQUO, + _______, KC_AT , KC_LBRC, KC_RBRC, KC_BSLS, KC_PERC, _______, _______, KC_CIRC, KC_ASTR, KC_LABK, KC_RABK, KC_QUES, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), [_FUNCTION] = LAYOUT( _______, KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_PSCR, KC_SLCK, KC_HOME, KC_PGDN, KC_PGUP, KC_END , _______, _______, KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_INS , KC_CLCK, KC_LEFT, KC_DOWN, KC_UP , KC_RGHT, _______, - _______, KC_F9 , KC_F10 , KC_F11 , KC_F12 , _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, EEP_RST, _______, + _______, KC_F9 , KC_F10 , KC_F11 , KC_F12 , _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, KC_PAUS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) }; \ No newline at end of file From e8dadf51ad4f43a72d246c3db7efc75253a388b5 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Reibl=20J=C3=A1nos=20D=C3=A1niel?= Date: Thu, 14 Oct 2021 19:28:06 +0200 Subject: [PATCH 276/595] [Keymap] Display default layer name (#14819) --- users/riblee/riblee.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) diff --git a/users/riblee/riblee.c b/users/riblee/riblee.c index 4bfa298c4a..ae3bd7a2b1 100644 --- a/users/riblee/riblee.c +++ b/users/riblee/riblee.c @@ -190,7 +190,19 @@ void oled_task_user(void) { switch (get_highest_layer(layer_state)) { case _QWERTY: - oled_write_P(PSTR("Default\n"), false); + if (layer_state_cmp(default_layer_state, _QWERTY)) { + oled_write_P(PSTR("Qwerty\n"), false); + } else if (layer_state_cmp(default_layer_state, _COLEMAK)) { + oled_write_P(PSTR("Colmak\n"), false); + } else if (layer_state_cmp(default_layer_state, _DVORAK)) { + oled_write_P(PSTR("Dvorak\n"), false); + } else if (layer_state_cmp(default_layer_state, _WORKMAN)) { + oled_write_P(PSTR("Workman\n"), false); + } else if (layer_state_cmp(default_layer_state, _HUNGARIAN)) { + oled_write_P(PSTR("HUN Qwerty\n"), false); + } else { + oled_write_P(PSTR("Undefined\n"), false); + } break; case _LOWER: oled_write_P(PSTR("Lower\n"), false); From a827adeaaedfbefc504c0f909a507706948cd40f Mon Sep 17 00:00:00 2001 From: MechMerlin <30334081+mechmerlin@users.noreply.github.com> Date: Thu, 14 Oct 2021 16:03:53 -0700 Subject: [PATCH 277/595] Documentation: Updated KBDFans readmes (#14725) Co-authored-by: Ryan --- keyboards/kbdfans/kbd4x/readme.md | 6 +++--- keyboards/kbdfans/kbd66/readme.md | 8 ++++---- keyboards/kbdfans/kbd67/hotswap/readme.md | 8 +++++--- .../kbdfans/kbd67/mkii_soldered/readme.md | 3 +-- keyboards/kbdfans/kbd67/mkiirgb/v1/readme.md | 4 +++- keyboards/kbdfans/kbd67/mkiirgb/v2/readme.md | 4 ++++ keyboards/kbdfans/kbd67/mkiirgb/v3/readme.md | 6 ++++++ keyboards/kbdfans/kbd67/readme.md | 19 ++++++++++--------- keyboards/kbdfans/kbd67/rev1/readme.md | 8 ++++---- keyboards/kbdfans/kbd67/rev2/readme.md | 8 ++++---- keyboards/kbdfans/kbd6x/readme.md | 6 +++--- keyboards/kbdfans/kbd75/readme.md | 14 ++++++++------ keyboards/kbdfans/kbd8x/readme.md | 8 +++----- keyboards/kbdfans/kbd8x_mk2/readme.md | 6 +++--- keyboards/kbdfans/kbdmini/readme.md | 2 -- 15 files changed, 61 insertions(+), 49 deletions(-) diff --git a/keyboards/kbdfans/kbd4x/readme.md b/keyboards/kbdfans/kbd4x/readme.md index 2e2a29290f..6220fe8249 100644 --- a/keyboards/kbdfans/kbd4x/readme.md +++ b/keyboards/kbdfans/kbd4x/readme.md @@ -4,9 +4,9 @@ A compact 40% (12x4) ortholinear keyboard kit sold by KBDFans. -Keyboard Maintainer: ![sevenseacat](https://github.com/sevenseacat) -Hardware Supported: KBD4x PCB -Hardware Availability: https://kbdfans.cn/collections/diy-kit/products/kbd4x-custom-mechanical-keyboard-hot-swap-diy-kit +* Keyboard Maintainer: ![sevenseacat](https://github.com/sevenseacat) +* Hardware Supported: KBD4x PCB +* Hardware Availability: https://kbdfans.cn/collections/diy-kit/products/kbd4x-custom-mechanical-keyboard-hot-swap-diy-kit Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/kbdfans/kbd66/readme.md b/keyboards/kbdfans/kbd66/readme.md index a2e5de0157..8979135c3f 100644 --- a/keyboards/kbdfans/kbd66/readme.md +++ b/keyboards/kbdfans/kbd66/readme.md @@ -2,11 +2,11 @@ ![KBD66](https://i.imgur.com/qtLuL2o.jpg) -A 65% keyboard from KBDFans. +A 66 key keyboard from KBDFans modeled after the FC660m. -Keyboard Maintainer: [Alex](https://github.com/allo-world) -Hardware Supported: KBD66, ATmega32U4 -Hardware Availability: [KBDFans](https://kbdfans.cn), [Massdrop](https://www.massdrop.com/buy/kbd66-mechanical-keyboard-kit?mode=guest_open) +* Keyboard Maintainer: [Alex](https://github.com/allo-world) +* Hardware Supported: KBD66, ATmega32U4 +* Hardware Availability: [KBDFans](https://kbdfans.cn), [Massdrop](https://www.massdrop.com/buy/kbd66-mechanical-keyboard-kit?mode=guest_open) Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/kbdfans/kbd67/hotswap/readme.md b/keyboards/kbdfans/kbd67/hotswap/readme.md index bb64c03e3c..49a74f109a 100644 --- a/keyboards/kbdfans/kbd67/hotswap/readme.md +++ b/keyboards/kbdfans/kbd67/hotswap/readme.md @@ -2,9 +2,11 @@ A 65% hot swap board with blocker and USB Type C port. -Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) -Hardware Supported: KBD67 Hotswap -Hardware Availability: [KBDFans](https://kbdfans.cn/products/coming-soon-kbd67-mechanical-keyboard-diy-kit) +This PCB was replaced by the hotswap variants of the kbd67mkii + +* Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) +* Hardware Supported: KBD67 Hotswap +* Hardware Availability: [KBDFans](https://kbdfans.cn/products/coming-soon-kbd67-mechanical-keyboard-diy-kit) Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/kbdfans/kbd67/mkii_soldered/readme.md b/keyboards/kbdfans/kbd67/mkii_soldered/readme.md index d864c9e99b..deea30f4fb 100644 --- a/keyboards/kbdfans/kbd67/mkii_soldered/readme.md +++ b/keyboards/kbdfans/kbd67/mkii_soldered/readme.md @@ -2,8 +2,7 @@ ![Render](https://i.imgur.com/W8jBycQ.png) -A simple 65% keyboard -This is for the solderable PCB for the MKII. For hotswap PCB firmware, please check the other directories. +Solderable 65% PCB made originally for the KBD67mkii by ai03. For hotswap PCB firmware, please check the other directories. * Keyboard Maintainer: [ai03](https://github.com/ai03-2725) / [KBDfans](https://kbdfans.cn/) * Hardware Supported: KBD67 MKII Soldered PCB (Not hotswap) diff --git a/keyboards/kbdfans/kbd67/mkiirgb/v1/readme.md b/keyboards/kbdfans/kbd67/mkiirgb/v1/readme.md index 94550ef320..a6d8578d7f 100644 --- a/keyboards/kbdfans/kbd67/mkiirgb/v1/readme.md +++ b/keyboards/kbdfans/kbd67/mkiirgb/v1/readme.md @@ -1,6 +1,8 @@ # KBD67 Mk.II RGB V1 (Hotswap) -A hotswap 65% keyboard with USB C and inswitch RGB. +An hotswap 65% keyboard with USB C and inswitch RGB. + +This was released along with the kbd67mkii keyboard that featured a top mount design, and brass weight. * Keyboard Maintainer: [moyi4681](https://github.com/moyi4681) * Hardware Supported: KBD67 Mk.II RGB V1 diff --git a/keyboards/kbdfans/kbd67/mkiirgb/v2/readme.md b/keyboards/kbdfans/kbd67/mkiirgb/v2/readme.md index 57683caab9..af25471fe5 100644 --- a/keyboards/kbdfans/kbd67/mkiirgb/v2/readme.md +++ b/keyboards/kbdfans/kbd67/mkiirgb/v2/readme.md @@ -2,6 +2,10 @@ A hotswap 65% keyboard with USB C, inswitch RGB, and ESD protection. +Originally sold as a replacement PCB for the kbd67mkii when the V1 PCB failed. + +It has since been sold along with the D64 and KBD67 Lite R1/R2. + * Keyboard Maintainer: [moyi4681](https://github.com/moyi4681) * Hardware Supported: KBD67 Mk.II RGB V2 * Hardware Availability: [kbdfans](https://kbdfans.myshopify.com/) diff --git a/keyboards/kbdfans/kbd67/mkiirgb/v3/readme.md b/keyboards/kbdfans/kbd67/mkiirgb/v3/readme.md index d62d4a517c..7442df9c6e 100644 --- a/keyboards/kbdfans/kbd67/mkiirgb/v3/readme.md +++ b/keyboards/kbdfans/kbd67/mkiirgb/v3/readme.md @@ -2,6 +2,12 @@ A hotswap 65% keyboard with USB C, inswitch RGB, and ESD protection. +Originally sold as a replacement to the V2 as it offered a much simpler firmware flashing experience for customers. This board expects `.bin` files. + +As of 10/2021 this board has no visible markings differentiating it from the previous V2. + +It has since been sold with the KBD67Lite R2, D64, and Blade 65. + * Keyboard Maintainer: [moyi4681](https://github.com/moyi4681) * Hardware Supported: KBD67 Mk.II RGB V3 * Hardware Availability: [kbdfans](https://kbdfans.myshopify.com/) diff --git a/keyboards/kbdfans/kbd67/readme.md b/keyboards/kbdfans/kbd67/readme.md index 2f5d10fa07..f3aed999a1 100644 --- a/keyboards/kbdfans/kbd67/readme.md +++ b/keyboards/kbdfans/kbd67/readme.md @@ -1,19 +1,19 @@ # KBD67 -A 65% keyboard sold in several variants. +A 65% keyboard sold in several variants supporting KBDFan's different 65% lineups each with their own different revisions. -1. [Rev1](rev1/): Released in early 2018. Atmega32u4 soldered keyboard. Sold under the name "KBD65". -2. [HotSwap](hotswap/): Released in late 2018. Atmega32U4 hotswap single layout keyboard. +1. [Rev1](rev1/): Released in early 2018. Atmega32u4 soldered keyboard. Sold under the name "KBD65". +2. [HotSwap](hotswap/): Released in late 2018. Atmega32U4 hotswap single layout keyboard. 3. [Rev2](rev2/): Released in April/May 2019. Atmega32u4 soldered keyboard. 4. [MKII](mkii_soldered/): Released in September 2019, designed by ai03. Atmega32u4 soldered keyboard. ESD Protected -5. [MKII RGB V1](mkiirgb/v1/): Released in September 2019. Arm hotswap board. +5. [MKII RGB V1](mkiirgb/v1/): Released in September 2019. Arm hotswap board. 6. [MKII RGB V2](mkiirgb/v2/): Released in December 2019. Atmega32u4 hotswap board. ESD Protected. - +6. [MKII RGB V2*](mkiirgb/v3/): Released in March 2021. Atmega32u4 hotswap board. ESD Protected. Uses LUFA bootloader and different inswitch RGB implementation. No visible markings differentiating it from the previous V2. **Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the `.hex` or `.bin` appropriate for your board. * Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin), [moyi4681](https://github.com/moyi4681) -* Hardware Supported: KBD67 rev1, rev2, hotswap, mkii, mkiirgb v1, mkiirgb v2 +* Hardware Supported: KBD67 rev1, rev2, hotswap, mkii, mkiirgb v1, mkiirgb v2, etc. * Hardware Availability: KBDFans Make examples for this keyboard (after setting up your build environment): @@ -21,8 +21,9 @@ Make examples for this keyboard (after setting up your build environment): make kbdfans/kbd67/rev1:default make kbdfans/kbd67/rev2:default make kbdfans/kbd67/hotswap:default - make kbdfans/kbd67/mkii_soldered:default - make kbdfans/kbd67/mkiirgb/v1:default - make kbdfans/kbd67/mkiirgb/v2:default + make kbdfans/kbd67/mkii_soldered:default + make kbdfans/kbd67/mkiirgb/v1:default + make kbdfans/kbd67/mkiirgb/v2:default + make kbdfans/kbd67/mkiirgb/v3:default See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/kbdfans/kbd67/rev1/readme.md b/keyboards/kbdfans/kbd67/rev1/readme.md index 1d92a41f7c..0e9c66b244 100644 --- a/keyboards/kbdfans/kbd67/rev1/readme.md +++ b/keyboards/kbdfans/kbd67/rev1/readme.md @@ -1,10 +1,10 @@ # KBD67 rev1 -65% keyboard with blocker. +65% keyboard with RGB underglow originally sold for the Tofu 65 and Tada 68 keyboards. -Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) -Hardware Supported: KBD67 PCB (Sometimes sold under the name "KBD65") -Hardware Availability: KBDFans [Keyboard Kit](https://kbdfans.cn/products/coming-soon-kbd67-mechanical-keyboard-diy-kit), [PCB](https://kbdfans.cn/collections/65/products/kbd65-65-custom-mechanical-keyboard-pcb) +* Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) +* Hardware Supported: KBD67 PCB (Sometimes sold under the name "KBD65") +* Hardware Availability: KBDFans [Keyboard Kit](https://kbdfans.cn/products/coming-soon-kbd67-mechanical-keyboard-diy-kit), [PCB](https://kbdfans.cn/collections/65/products/kbd65-65-custom-mechanical-keyboard-pcb) Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/kbdfans/kbd67/rev2/readme.md b/keyboards/kbdfans/kbd67/rev2/readme.md index 0909f781d0..5181de3a99 100644 --- a/keyboards/kbdfans/kbd67/rev2/readme.md +++ b/keyboards/kbdfans/kbd67/rev2/readme.md @@ -1,10 +1,10 @@ # KBD67 rev2 -65% pcb with blocker. Revision 2 (Manufactured after 05/01/19). +65% keyboard with RGB underglow originally sold for the Tofu 65 and Tada 68 keyboards. -Keyboard Maintainer: [Vorror](https://github.com/vorror) -Hardware Supported: KBD67v2 PCB (Sometimes sold under the name "KBD65") -Hardware Availability: KBDFans [Keyboard Kit](https://kbdfans.cn/products/coming-soon-kbd67-mechanical-keyboard-diy-kit), [PCB](https://kbdfans.cn/collections/65/products/kbd65-65-custom-mechanical-keyboard-pcb) +* Keyboard Maintainer: [Vorror](https://github.com/vorror) +* Hardware Supported: KBD67v2 PCB (Sometimes sold under the name "KBD65") +* Hardware Availability: KBDFans [Keyboard Kit](https://kbdfans.cn/products/coming-soon-kbd67-mechanical-keyboard-diy-kit), [PCB](https://kbdfans.cn/collections/65/products/kbd65-65-custom-mechanical-keyboard-pcb) Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/kbdfans/kbd6x/readme.md b/keyboards/kbdfans/kbd6x/readme.md index 1728c8c21b..1fd1d2848a 100644 --- a/keyboards/kbdfans/kbd6x/readme.md +++ b/keyboards/kbdfans/kbd6x/readme.md @@ -2,9 +2,9 @@ A WKL Hot Swap Double USB C 60% -Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) -Hardware Supported: KBD6x PCB -Hardware Availability: [KBDFans](https://kbdfans.cn/products/kbd6x-wkl-hot-swap-60-double-type-c-pcb) +* Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) +* Hardware Supported: KBD6x PCB +* Hardware Availability: [KBDFans](https://kbdfans.cn/products/kbd6x-wkl-hot-swap-60-double-type-c-pcb) Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/kbdfans/kbd75/readme.md b/keyboards/kbdfans/kbd75/readme.md index c2bbdbb8b7..b7bf379c10 100644 --- a/keyboards/kbdfans/kbd75/readme.md +++ b/keyboards/kbdfans/kbd75/readme.md @@ -1,11 +1,5 @@ # KBD75 -Keyboard Maintainer: QMK Community -Hardware Supported: KBD75 PCB rev 1 and 2 -Hardware Availability: -* https://kbdfans.com/collections/75-diy-kit/products/kbd75-keyboard-set -* https://kbdfans.com/collections/75-diy-kit/products/kbd75v2-custom-keyboard-diy-kit - The KBD75 was sold through various rounds, with various PCB changes between them. * **Round 1 (2017)**: Black PCB - Bootmapper Client, atmega32a MCU (Use [Winkeyless.kr B.mini](../../winkeyless/bmini/) firmware) @@ -14,6 +8,14 @@ The KBD75 was sold through various rounds, with various PCB changes between them * **Round 6 (2019)**: White PCB with USB C - QMK Firmware, atmega32u4 MCU (Use KBD75 rev1 or rev2(with numpad support)) * **V2 (2019-)**: Same as **Round 6** (above). +**Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** + +* Keyboard Maintainer: QMK Community +* Hardware Supported: KBD75 PCB rev 1 and 2 +* Hardware Availability: + * https://kbdfans.com/collections/75-diy-kit/products/kbd75-keyboard-set + * https://kbdfans.com/collections/75-diy-kit/products/kbd75v2-custom-keyboard-diy-kit + Make example for this keyboard (after setting up your build environment): make kbdfans/kbd75/rev1:default diff --git a/keyboards/kbdfans/kbd8x/readme.md b/keyboards/kbdfans/kbd8x/readme.md index 9f8555560a..d95d51533d 100644 --- a/keyboards/kbdfans/kbd8x/readme.md +++ b/keyboards/kbdfans/kbd8x/readme.md @@ -1,12 +1,10 @@ # KBD8X -![kbd8x](imgur.com image replace me!) - TKL Keyboard from KBDFans -Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) -Hardware Supported: kbd8x -Hardware Availability: [KBDFans](https://kbdfans.cn/blogs/updates/kbd-8x-update-40) +* Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) +* Hardware Supported: kbd8x +* Hardware Availability: [KBDFans](https://kbdfans.cn/blogs/updates/kbd-8x-update-40) Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/kbdfans/kbd8x_mk2/readme.md b/keyboards/kbdfans/kbd8x_mk2/readme.md index fbd6504609..d20a17da4d 100644 --- a/keyboards/kbdfans/kbd8x_mk2/readme.md +++ b/keyboards/kbdfans/kbd8x_mk2/readme.md @@ -4,9 +4,9 @@ A fairly typical TKL -Keyboard Maintainer: [ai03](https://github.com/ai03-2725) / [KBDfans](https://kbdfans.cn/) -Hardware Supported: KBD8X MKII PCB/case -Hardware Availability: [KBDfans](https://kbdfans.com/collections/90-kbd19x/products/gb-kbd8x-mkii-pcb) +* Keyboard Maintainer: [ai03](https://github.com/ai03-2725) / [KBDfans](https://kbdfans.cn/) +* Hardware Supported: KBD8X MKII PCB/case +* Hardware Availability: [KBDfans](https://kbdfans.com/collections/90-kbd19x/products/gb-kbd8x-mkii-pcb) Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/kbdfans/kbdmini/readme.md b/keyboards/kbdfans/kbdmini/readme.md index 5d5ebe2a7a..8b5e0478d3 100644 --- a/keyboards/kbdfans/kbdmini/readme.md +++ b/keyboards/kbdfans/kbdmini/readme.md @@ -1,7 +1,5 @@ # KBDMINI -![KBDMINI](imgur.com image replace me!) - * Keyboard Maintainer: [DZTECH](https://github.com/moyi4681) * Hardware Supported: KBDMINI * Hardware Availability: [KBDFans](https://kbdfans.cn/) From 943ca36accbb71be38387634caf09667e0e53911 Mon Sep 17 00:00:00 2001 From: rhmokey <57172003+rhmokey@users.noreply.github.com> Date: Fri, 15 Oct 2021 07:55:51 +0800 Subject: [PATCH 278/595] [Keyboard] Add ginkgo65 (#14802) Co-authored-by: Ryan --- keyboards/mokey/ginkgo65/config.h | 41 ++ keyboards/mokey/ginkgo65/ginkgo65.c | 16 + keyboards/mokey/ginkgo65/ginkgo65.h | 188 +++++++ keyboards/mokey/ginkgo65/info.json | 469 ++++++++++++++++++ .../mokey/ginkgo65/keymaps/default/keymap.c | 43 ++ keyboards/mokey/ginkgo65/keymaps/via/keymap.c | 50 ++ keyboards/mokey/ginkgo65/keymaps/via/rules.mk | 2 + keyboards/mokey/ginkgo65/readme.md | 21 + keyboards/mokey/ginkgo65/rules.mk | 21 + 9 files changed, 851 insertions(+) create mode 100644 keyboards/mokey/ginkgo65/config.h create mode 100644 keyboards/mokey/ginkgo65/ginkgo65.c create mode 100644 keyboards/mokey/ginkgo65/ginkgo65.h create mode 100644 keyboards/mokey/ginkgo65/info.json create mode 100644 keyboards/mokey/ginkgo65/keymaps/default/keymap.c create mode 100644 keyboards/mokey/ginkgo65/keymaps/via/keymap.c create mode 100644 keyboards/mokey/ginkgo65/keymaps/via/rules.mk create mode 100644 keyboards/mokey/ginkgo65/readme.md create mode 100644 keyboards/mokey/ginkgo65/rules.mk diff --git a/keyboards/mokey/ginkgo65/config.h b/keyboards/mokey/ginkgo65/config.h new file mode 100644 index 0000000000..3660989267 --- /dev/null +++ b/keyboards/mokey/ginkgo65/config.h @@ -0,0 +1,41 @@ +/* +Copyright 2021 Kyle McCreery +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x6653 +#define PRODUCT_ID 0x3365 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Mokey +#define PRODUCT ginkgo 65 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 16 + /* 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 */ +#define MATRIX_ROW_PINS { F7, B7, F5, F1, B0 } +#define MATRIX_COL_PINS { C7, F6, B2, F4, B3, E6, D0, D1, D2, D3, D5, D4, D6, D7, B4, B1 } +#define UNUSED_PINS +#define DIODE_DIRECTION COL2ROW + +#define BACKLIGHT_PIN B6 +#define BACKLIGHT_LEVELS 6 +#define BACKLIGHT_CAPS_LOCK +#define BACKLIGHT_BREATHING +#define BREATHING_PERIOD 5 + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 diff --git a/keyboards/mokey/ginkgo65/ginkgo65.c b/keyboards/mokey/ginkgo65/ginkgo65.c new file mode 100644 index 0000000000..4ab3aae51f --- /dev/null +++ b/keyboards/mokey/ginkgo65/ginkgo65.c @@ -0,0 +1,16 @@ +/* Copyright 2021 Ocean + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "ginkgo65.h" + diff --git a/keyboards/mokey/ginkgo65/ginkgo65.h b/keyboards/mokey/ginkgo65/ginkgo65.h new file mode 100644 index 0000000000..72342f08bb --- /dev/null +++ b/keyboards/mokey/ginkgo65/ginkgo65.h @@ -0,0 +1,188 @@ +/* Copyright 2021 Ocean + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" + +#define XXX KC_NO + +/*LAYOUT + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐ + * │k00│k01│k02│k03│k04│k05│k06│k07│k08│k09│k0A│k0B│k0C│ k0D │k0F│ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤ + * │ k10 │k11│k12│k13│k14│k15│k16│k17│k18│k19│k1A│k1B│k1C│ k1D │k1E│ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤ + * │ k20 │k21│k22│k23│k24│k25│k26│k27│k28│k29│k2A│k2B│ k2D │k2E│ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤ + * │ k30 │k32│k33│k34│k35│k36│k37│k38│k39│k3A│k3B│ k3C │k3D│k3E│ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤ + * │k40 │k41 │k42 │ k44 │k49 │k4A │ │k4C│k4D│k4E│ + * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘ + 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 +*/ +#define LAYOUT( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0F, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2D, k2E, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ + k40, k41, k42, k44, k49, k4A, k4C, k4D, k4E \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, XXX, k0F }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, XXX }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, XXX, k2D, k2E, XXX }, \ + { k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, XXX }, \ + { k40, k41, k42, XXX, k44, XXX, XXX, XXX, XXX, k49, k4A, XXX, k4C, k4D, k4E, XXX }, \ +} + +/*LAYOUT_iso + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ + * │k00│k01│k02│k03│k04│k05│k06│k07│k08│k09│k0A│k0B│k0C│k0D│k0E│k0F│ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┤ + * │ k10 │k11│k12│k13│k14│k15│k16│k17│k18│k19│k1A│k1B│k1C│ K2D │k1E│ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ ├───┤ + * │ k20 │k21│k22│k23│k24│k25│k26│k27│k28│k29│k2A│k2B│k1D│ │k2E│ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┼───┤ + * │ k30 │k32│k33│k34│k35│k36│k37│k38│k39│k3A│k3B│ k3C │k3D│k3E│ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤ + * │k40 │k41 │k42 │ k44 │k49 │k4A │ │k4C│k4D│k4E│ + * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘ + 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 +*/ +#define LAYOUT_iso( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k2D, k1E, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k1D, k2E, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ + k40, k41, k42, k44, k49, k4A, k4C, k4D, k4E \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k2D, k1E, XXX }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, XXX, k2D, k2E, XXX }, \ + { k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, XXX }, \ + { k40, k41, k42, XXX, k44, XXX, XXX, XXX, XXX, k49, k4A, XXX, k4C, k4D, k4E, XXX }, \ +} + +/*LAYOUT_split_left_shift + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ + * │k00│k01│k02│k03│k04│k05│k06│k07│k08│k09│k0A│k0B│k0C│k0D│k0E│k0F│ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┤ + * │ k10 │k11│k12│k13│k14│k15│k16│k17│k18│k19│k1A│k1B│k1C│ K2D │k1E│ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ ├───┤ + * │ k20 │k21│k22│k23│k24│k25│k26│k27│k28│k29│k2A│k2B│k1D│ │k2E│ + * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┼───┤ + * │k30 │k31│k32│k33│k34│k35│k36│k37│k38│k39│k3A│k3B│ k3C │k3D│k3E│ + * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤ + * │k40 │k41 │k42 │ k44 │k49 │k4A │ │k4C│k4D│k4E│ + * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘ + 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 +*/ +#define LAYOUT_split_left_shift( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k2D, k1E, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k1D, k2E, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ + k40, k41, k42, k44, k49, k4A, k4C, k4D, k4E \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k2D, k1E, XXX, }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, XXX, k2D, k2E, XXX }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, XXX }, \ + { k40, k41, k42, XXX, k44, XXX, XXX, XXX, XXX, k49, k4A, XXX, k4C, k4D, k4E, XXX }, \ +} + +/*LAYOUT_7u_space + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ + * │k00│k01│k02│k03│k04│k05│k06│k07│k08│k09│k0A│k0B│k0C│k0D│k0E│k0F│ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┤ + * │ k10 │k11│k12│k13│k14│k15│k16│k17│k18│k19│k1A│k1B│k1C│ K2D │k1E│ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ ├───┤ + * │ k20 │k21│k22│k23│k24│k25│k26│k27│k28│k29│k2A│k2B│k1D│ │k2E│ + * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┼───┤ + * │k30 │k31│k32│k33│k34│k35│k36│k37│k38│k39│k3A│k3B│ k3C │k3D│k3E│ + * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴───┴──┬┴───┴┬─┬───┼───┼───┤ + * │k40 │k41 │k42 │ k44 │k4A │ │k4C│k4D│k4E│ + * └────┴────┴────┴────────────────────────────┴─────┘ └───┴───┴───┘ + 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 +*/ +#define LAYOUT_7u_space( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k2D, k1E, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k1D, k2E, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ + k40, k41, k42, k44, k4A, k4C, k4D, k4E \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k2D, k1E, XXX, }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, XXX, k2D, k2E, XXX }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, XXX }, \ + { k40, k41, k42, XXX, k44, XXX, XXX, XXX, XXX, XXX, k4A, XXX, k4C, k4D, k4E, XXX }, \ +} + +/*LAYOUT_split_space_1 + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ + * │k00│k01│k02│k03│k04│k05│k06│k07│k08│k09│k0A│k0B│k0C│k0D│k0E│k0F│ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┤ + * │ k10 │k11│k12│k13│k14│k15│k16│k17│k18│k19│k1A│k1B│k1C│ K2D │k1E│ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ ├───┤ + * │ k20 │k21│k22│k23│k24│k25│k26│k27│k28│k29│k2A│k2B│k1D│ │k2E│ + * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┼───┤ + * │k30 │k31│k32│k33│k34│k35│k36│k37│k38│k39│k3A│k3B│ k3C │k3D│k3E│ + * ├────┼───┴┬──┴─┬─┴───┴───┴┬──┴─┬─┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤ + * │k40 │k41 │k42 │k43 │K44 │ K46 │K49 │k4A │ │k4C│k4D│k4E│ + * └────┴────┴────┴──────────┴────┴────────┴────┴────┘ └───┴───┴───┘ + 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 +*/ +#define LAYOUT_split_space_1( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k2D, k1E, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k1D, k2E, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ + k40, k41, k42, K43, k44, K46, K49, k4A, k4C, k4D, k4E \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k2D, k1E, XXX, }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, XXX, k2D, k2E, XXX }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, XXX }, \ + { k40, k41, k42, K43, k44, XXX, K46, XXX, XXX, XXX, k4A, XXX, k4C, k4D, k4E, XXX }, \ +} + +/*LAYOUT_split_space_2 + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ + * │k00│k01│k02│k03│k04│k05│k06│k07│k08│k09│k0A│k0B│k0C│k0D│k0E│k0F│ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┤ + * │ k10 │k11│k12│k13│k14│k15│k16│k17│k18│k19│k1A│k1B│k1C│ K2D │k1E│ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ ├───┤ + * │ k20 │k21│k22│k23│k24│k25│k26│k27│k28│k29│k2A│k2B│k1D│ │k2E│ + * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┼───┤ + * │k30 │k31│k32│k33│k34│k35│k36│k37│k38│k39│k3A│k3B│ k3C │k3D│k3E│ + * ├────┼───┴┬──┴─┬─┴───┴──┬┴───┼───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤ + * │k40 │k41 │k42 │k43 │K44 │ K46 │K49 │k4A │ │k4C│k4D│k4E│ + * └────┴────┴────┴────────┴────┴──────────┴────┴────┘ └───┴───┴───┘ + 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 +*/ +#define LAYOUT_split_space_2( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k2D, k1E, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k1D, k2E, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ + k40, k41, k42, K43, k44, K46, K49, k4A, k4C, k4D, k4E \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k2D, k1E, XXX, }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, XXX, k2D, k2E, XXX }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, XXX }, \ + { k40, k41, k42, K43, k44, XXX, K46, XXX, XXX, XXX, k4A, XXX, k4C, k4D, k4E, XXX }, \ +} diff --git a/keyboards/mokey/ginkgo65/info.json b/keyboards/mokey/ginkgo65/info.json new file mode 100644 index 0000000000..116b3e057a --- /dev/null +++ b/keyboards/mokey/ginkgo65/info.json @@ -0,0 +1,469 @@ +{ + "keyboard_name": "ginkgo65", + "url": "", + "maintainer": "mokey", + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"k00", "x":0, "y":0}, + {"label":"k01", "x":1, "y":0}, + {"label":"k02", "x":2, "y":0}, + {"label":"k03", "x":3, "y":0}, + {"label":"k04", "x":4, "y":0}, + {"label":"k05", "x":5, "y":0}, + {"label":"k06", "x":6, "y":0}, + {"label":"k07", "x":7, "y":0}, + {"label":"k08", "x":8, "y":0}, + {"label":"k09", "x":9, "y":0}, + {"label":"k0a", "x":10, "y":0}, + {"label":"k0b", "x":11, "y":0}, + {"label":"k0c", "x":12, "y":0}, + {"label":"k0e", "x":13, "y":0, "w":2}, + {"label":"k0f", "x":15, "y":0}, + + {"label":"k10", "x":0, "y":1, "w":1.5}, + {"label":"k11", "x":1.5, "y":1}, + {"label":"k12", "x":2.5, "y":1}, + {"label":"k13", "x":3.5, "y":1}, + {"label":"k14", "x":4.5, "y":1}, + {"label":"k15", "x":5.5, "y":1}, + {"label":"k16", "x":6.5, "y":1}, + {"label":"k17", "x":7.5, "y":1}, + {"label":"k18", "x":8.5, "y":1}, + {"label":"k19", "x":9.5, "y":1}, + {"label":"k1a", "x":10.5, "y":1}, + {"label":"k1b", "x":11.5, "y":1}, + {"label":"k1c", "x":12.5, "y":1}, + {"label":"k1d", "x":13.5, "y":1, "w":1.5}, + {"label":"k1e", "x":15, "y":1,}, + + {"label":"k20", "x":0, "y":2, "w":1.75}, + {"label":"k21", "x":1.75, "y":2}, + {"label":"k22", "x":2.75, "y":2}, + {"label":"k23", "x":3.75, "y":2}, + {"label":"k24", "x":4.75, "y":2}, + {"label":"k25", "x":5.75, "y":2}, + {"label":"k26", "x":6.75, "y":2}, + {"label":"k27", "x":7.75, "y":2}, + {"label":"k28", "x":8.75, "y":2}, + {"label":"k29", "x":9.75, "y":2}, + {"label":"k2a", "x":10.75, "y":2}, + {"label":"k2b", "x":11.75, "y":2}, + {"label":"k2d", "x":12.75, "y":2, "w":2.25}, + {"label":"k2e", "x":15, "y":2}, + + {"label":"k30", "x":0, "y":3, "w":2.25}, + {"label":"k32", "x":2.25, "y":3}, + {"label":"k33", "x":3.25, "y":3}, + {"label":"k34", "x":4.25, "y":3}, + {"label":"k35", "x":5.25, "y":3}, + {"label":"k36", "x":6.25, "y":3}, + {"label":"k37", "x":7.25, "y":3}, + {"label":"k38", "x":8.25, "y":3}, + {"label":"k39", "x":9.25, "y":3}, + {"label":"k3a", "x":10.25, "y":3}, + {"label":"k3b", "x":11.25, "y":3}, + {"label":"k3c", "x":12.25, "y":3, "w":1.75}, + {"label":"k3d", "x":14, "y":3}, + {"label":"k3e", "x":15, "y":3}, + + {"label":"k40", "x":0, "y":4, "w":1.25}, + {"label":"k41", "x":1.25, "y":4, "w":1.25}, + {"label":"k42", "x":2.5, "y":4, "w":1.25}, + {"label":"k44", "x":3.75, "y":4, "w":6.25}, + {"label":"k49", "x":10, "y":4, "w":1.25}, + {"label":"k4a", "x":11.25, "y":4, "w":1.25}, + {"label":"k4c", "x":13, "y":4}, + {"label":"k4d", "x":14, "y":4}, + {"label":"k4e", "x":15, "y":4} + ] + }, + "LAYOUT_iso":{ + "layout": [ + {"label":"k00", "x":0, "y":0}, + {"label":"k01", "x":1, "y":0}, + {"label":"k02", "x":2, "y":0}, + {"label":"k03", "x":3, "y":0}, + {"label":"k04", "x":4, "y":0}, + {"label":"k05", "x":5, "y":0}, + {"label":"k06", "x":6, "y":0}, + {"label":"k07", "x":7, "y":0}, + {"label":"k08", "x":8, "y":0}, + {"label":"k09", "x":9, "y":0}, + {"label":"k0a", "x":10, "y":0}, + {"label":"k0b", "x":11, "y":0}, + {"label":"k0c", "x":12, "y":0}, + {"label":"k0d", "x":13, "y":0}, + {"label":"k0e", "x":14, "y":0}, + {"label":"k0f", "x":15, "y":0}, + + {"label":"k10", "x":0, "y":1, "w":1.5}, + {"label":"k11", "x":1.5, "y":1}, + {"label":"k12", "x":2.5, "y":1}, + {"label":"k13", "x":3.5, "y":1}, + {"label":"k14", "x":4.5, "y":1}, + {"label":"k15", "x":5.5, "y":1}, + {"label":"k16", "x":6.5, "y":1}, + {"label":"k17", "x":7.5, "y":1}, + {"label":"k18", "x":8.5, "y":1}, + {"label":"k19", "x":9.5, "y":1}, + {"label":"k1a", "x":10.5, "y":1}, + {"label":"k1b", "x":11.5, "y":1}, + {"label":"k1c", "x":12.5, "y":1}, + {"label":"k2d", "x":13.75, "y":1, "w":1.25}, + {"label":"k1e", "x":15, "y":1,}, + + {"label":"k20", "x":0, "y":2, "w":1.75}, + {"label":"k21", "x":1.75, "y":2}, + {"label":"k22", "x":2.75, "y":2}, + {"label":"k23", "x":3.75, "y":2}, + {"label":"k24", "x":4.75, "y":2}, + {"label":"k25", "x":5.75, "y":2}, + {"label":"k26", "x":6.75, "y":2}, + {"label":"k27", "x":7.75, "y":2}, + {"label":"k28", "x":8.75, "y":2}, + {"label":"k29", "x":9.75, "y":2}, + {"label":"k2a", "x":10.75, "y":2}, + {"label":"k2b", "x":11.75, "y":2}, + {"label":"k1d", "x":12.75, "y":2}, + {"label":"k2e", "x":15, "y":2}, + + {"label":"k30", "x":0, "y":3, "w":2.25}, + {"label":"k32", "x":2.25, "y":3}, + {"label":"k33", "x":3.25, "y":3}, + {"label":"k34", "x":4.25, "y":3}, + {"label":"k35", "x":5.25, "y":3}, + {"label":"k36", "x":6.25, "y":3}, + {"label":"k37", "x":7.25, "y":3}, + {"label":"k38", "x":8.25, "y":3}, + {"label":"k39", "x":9.25, "y":3}, + {"label":"k3a", "x":10.25, "y":3}, + {"label":"k3b", "x":11.25, "y":3}, + {"label":"k3c", "x":12.25, "y":3, "w":1.75}, + {"label":"k3d", "x":14, "y":3}, + {"label":"k3e", "x":15, "y":3}, + + {"label":"k40", "x":0, "y":4, "w":1.25}, + {"label":"k41", "x":1.25, "y":4, "w":1.25}, + {"label":"k42", "x":2.5, "y":4, "w":1.25}, + {"label":"k44", "x":3.75, "y":4, "w":6.25}, + {"label":"k49", "x":10, "y":4, "w":1.25}, + {"label":"k4a", "x":11.25, "y":4, "w":1.25}, + {"label":"k4c", "x":13, "y":4}, + {"label":"k4d", "x":14, "y":4}, + {"label":"k4e", "x":15, "y":4} + ] + }, + "LAYOUT_split_left_shift":{ + "layout": [ + {"label":"k00", "x":0, "y":0}, + {"label":"k01", "x":1, "y":0}, + {"label":"k02", "x":2, "y":0}, + {"label":"k03", "x":3, "y":0}, + {"label":"k04", "x":4, "y":0}, + {"label":"k05", "x":5, "y":0}, + {"label":"k06", "x":6, "y":0}, + {"label":"k07", "x":7, "y":0}, + {"label":"k08", "x":8, "y":0}, + {"label":"k09", "x":9, "y":0}, + {"label":"k0a", "x":10, "y":0}, + {"label":"k0b", "x":11, "y":0}, + {"label":"k0c", "x":12, "y":0}, + {"label":"k0d", "x":13, "y":0}, + {"label":"k0e", "x":14, "y":0}, + {"label":"k0f", "x":15, "y":0}, + + {"label":"k10", "x":0, "y":1, "w":1.5}, + {"label":"k11", "x":1.5, "y":1}, + {"label":"k12", "x":2.5, "y":1}, + {"label":"k13", "x":3.5, "y":1}, + {"label":"k14", "x":4.5, "y":1}, + {"label":"k15", "x":5.5, "y":1}, + {"label":"k16", "x":6.5, "y":1}, + {"label":"k17", "x":7.5, "y":1}, + {"label":"k18", "x":8.5, "y":1}, + {"label":"k19", "x":9.5, "y":1}, + {"label":"k1a", "x":10.5, "y":1}, + {"label":"k1b", "x":11.5, "y":1}, + {"label":"k1c", "x":12.5, "y":1}, + {"label":"k2d", "x":13.75, "y":1, "w":1.25}, + {"label":"k1e", "x":15, "y":1,}, + + {"label":"k20", "x":0, "y":2, "w":1.75}, + {"label":"k21", "x":1.75, "y":2}, + {"label":"k22", "x":2.75, "y":2}, + {"label":"k23", "x":3.75, "y":2}, + {"label":"k24", "x":4.75, "y":2}, + {"label":"k25", "x":5.75, "y":2}, + {"label":"k26", "x":6.75, "y":2}, + {"label":"k27", "x":7.75, "y":2}, + {"label":"k28", "x":8.75, "y":2}, + {"label":"k29", "x":9.75, "y":2}, + {"label":"k2a", "x":10.75, "y":2}, + {"label":"k2b", "x":11.75, "y":2}, + {"label":"k1d", "x":12.75, "y":2}, + {"label":"k2e", "x":15, "y":2}, + + {"label":"k30", "x":0, "y":3, "w":1.25}, + {"label":"k31", "x":1.25, "y":3}, + {"label":"k32", "x":2.25, "y":3}, + {"label":"k33", "x":3.25, "y":3}, + {"label":"k34", "x":4.25, "y":3}, + {"label":"k35", "x":5.25, "y":3}, + {"label":"k36", "x":6.25, "y":3}, + {"label":"k37", "x":7.25, "y":3}, + {"label":"k38", "x":8.25, "y":3}, + {"label":"k39", "x":9.25, "y":3}, + {"label":"k3a", "x":10.25, "y":3}, + {"label":"k3b", "x":11.25, "y":3}, + {"label":"k3c", "x":12.25, "y":3, "w":1.75}, + {"label":"k3d", "x":14, "y":3}, + {"label":"k3e", "x":15, "y":3}, + + {"label":"k40", "x":0, "y":4, "w":1.25}, + {"label":"k41", "x":1.25, "y":4, "w":1.25}, + {"label":"k42", "x":2.5, "y":4, "w":1.25}, + {"label":"k44", "x":3.75, "y":4, "w":6.25}, + {"label":"k49", "x":10, "y":4, "w":1.25}, + {"label":"k4a", "x":11.25, "y":4, "w":1.25}, + {"label":"k4c", "x":13, "y":4}, + {"label":"k4d", "x":14, "y":4}, + {"label":"k4e", "x":15, "y":4} + ] + }, + "LAYOUT_7u_space":{ + "layout": [ + {"label":"k00", "x":0, "y":0}, + {"label":"k01", "x":1, "y":0}, + {"label":"k02", "x":2, "y":0}, + {"label":"k03", "x":3, "y":0}, + {"label":"k04", "x":4, "y":0}, + {"label":"k05", "x":5, "y":0}, + {"label":"k06", "x":6, "y":0}, + {"label":"k07", "x":7, "y":0}, + {"label":"k08", "x":8, "y":0}, + {"label":"k09", "x":9, "y":0}, + {"label":"k0a", "x":10, "y":0}, + {"label":"k0b", "x":11, "y":0}, + {"label":"k0c", "x":12, "y":0}, + {"label":"k0d", "x":13, "y":0}, + {"label":"k0e", "x":14, "y":0}, + {"label":"k0f", "x":15, "y":0}, + + {"label":"k10", "x":0, "y":1, "w":1.5}, + {"label":"k11", "x":1.5, "y":1}, + {"label":"k12", "x":2.5, "y":1}, + {"label":"k13", "x":3.5, "y":1}, + {"label":"k14", "x":4.5, "y":1}, + {"label":"k15", "x":5.5, "y":1}, + {"label":"k16", "x":6.5, "y":1}, + {"label":"k17", "x":7.5, "y":1}, + {"label":"k18", "x":8.5, "y":1}, + {"label":"k19", "x":9.5, "y":1}, + {"label":"k1a", "x":10.5, "y":1}, + {"label":"k1b", "x":11.5, "y":1}, + {"label":"k1c", "x":12.5, "y":1}, + {"label":"k2d", "x":13.75, "y":1, "w":1.25}, + {"label":"k1e", "x":15, "y":1,}, + + {"label":"k20", "x":0, "y":2, "w":1.75}, + {"label":"k21", "x":1.75, "y":2}, + {"label":"k22", "x":2.75, "y":2}, + {"label":"k23", "x":3.75, "y":2}, + {"label":"k24", "x":4.75, "y":2}, + {"label":"k25", "x":5.75, "y":2}, + {"label":"k26", "x":6.75, "y":2}, + {"label":"k27", "x":7.75, "y":2}, + {"label":"k28", "x":8.75, "y":2}, + {"label":"k29", "x":9.75, "y":2}, + {"label":"k2a", "x":10.75, "y":2}, + {"label":"k2b", "x":11.75, "y":2}, + {"label":"k1d", "x":12.75, "y":2}, + {"label":"k2e", "x":15, "y":2}, + + {"label":"k30", "x":0, "y":3, "w":1.25}, + {"label":"k31", "x":1.25, "y":3}, + {"label":"k32", "x":2.25, "y":3}, + {"label":"k33", "x":3.25, "y":3}, + {"label":"k34", "x":4.25, "y":3}, + {"label":"k35", "x":5.25, "y":3}, + {"label":"k36", "x":6.25, "y":3}, + {"label":"k37", "x":7.25, "y":3}, + {"label":"k38", "x":8.25, "y":3}, + {"label":"k39", "x":9.25, "y":3}, + {"label":"k3a", "x":10.25, "y":3}, + {"label":"k3b", "x":11.25, "y":3}, + {"label":"k3c", "x":12.25, "y":3, "w":1.75}, + {"label":"k3d", "x":14, "y":3}, + {"label":"k3e", "x":15, "y":3}, + + {"label":"k40", "x":0, "y":4, "w":1.5}, + {"label":"k41", "x":1.5, "y":4,}, + {"label":"k42", "x":2.5, "y":4, "w":1.5}, + {"label":"k44", "x":4, "y":4, "w":7}, + {"label":"k49", "x":11, "y":4, "w":1.5}, + {"label":"k4c", "x":13, "y":4}, + {"label":"k4d", "x":14, "y":4}, + {"label":"k4e", "x":15, "y":4} + ] + }, + "LAYOUT_split_space_1":{ + "layout": [ + {"label":"k00", "x":0, "y":0}, + {"label":"k01", "x":1, "y":0}, + {"label":"k02", "x":2, "y":0}, + {"label":"k03", "x":3, "y":0}, + {"label":"k04", "x":4, "y":0}, + {"label":"k05", "x":5, "y":0}, + {"label":"k06", "x":6, "y":0}, + {"label":"k07", "x":7, "y":0}, + {"label":"k08", "x":8, "y":0}, + {"label":"k09", "x":9, "y":0}, + {"label":"k0a", "x":10, "y":0}, + {"label":"k0b", "x":11, "y":0}, + {"label":"k0c", "x":12, "y":0}, + {"label":"k0d", "x":13, "y":0}, + {"label":"k0e", "x":14, "y":0}, + {"label":"k0f", "x":15, "y":0}, + + {"label":"k10", "x":0, "y":1, "w":1.5}, + {"label":"k11", "x":1.5, "y":1}, + {"label":"k12", "x":2.5, "y":1}, + {"label":"k13", "x":3.5, "y":1}, + {"label":"k14", "x":4.5, "y":1}, + {"label":"k15", "x":5.5, "y":1}, + {"label":"k16", "x":6.5, "y":1}, + {"label":"k17", "x":7.5, "y":1}, + {"label":"k18", "x":8.5, "y":1}, + {"label":"k19", "x":9.5, "y":1}, + {"label":"k1a", "x":10.5, "y":1}, + {"label":"k1b", "x":11.5, "y":1}, + {"label":"k1c", "x":12.5, "y":1}, + {"label":"k2d", "x":13.75, "y":1, "w":1.25}, + {"label":"k1e", "x":15, "y":1,}, + + {"label":"k20", "x":0, "y":2, "w":1.75}, + {"label":"k21", "x":1.75, "y":2}, + {"label":"k22", "x":2.75, "y":2}, + {"label":"k23", "x":3.75, "y":2}, + {"label":"k24", "x":4.75, "y":2}, + {"label":"k25", "x":5.75, "y":2}, + {"label":"k26", "x":6.75, "y":2}, + {"label":"k27", "x":7.75, "y":2}, + {"label":"k28", "x":8.75, "y":2}, + {"label":"k29", "x":9.75, "y":2}, + {"label":"k2a", "x":10.75, "y":2}, + {"label":"k2b", "x":11.75, "y":2}, + {"label":"k1d", "x":12.75, "y":2}, + {"label":"k2e", "x":15, "y":2}, + + {"label":"k30", "x":0, "y":3, "w":1.25}, + {"label":"k31", "x":1.25, "y":3}, + {"label":"k32", "x":2.25, "y":3}, + {"label":"k33", "x":3.25, "y":3}, + {"label":"k34", "x":4.25, "y":3}, + {"label":"k35", "x":5.25, "y":3}, + {"label":"k36", "x":6.25, "y":3}, + {"label":"k37", "x":7.25, "y":3}, + {"label":"k38", "x":8.25, "y":3}, + {"label":"k39", "x":9.25, "y":3}, + {"label":"k3a", "x":10.25, "y":3}, + {"label":"k3b", "x":11.25, "y":3}, + {"label":"k3c", "x":12.25, "y":3, "w":1.75}, + {"label":"k3d", "x":14, "y":3}, + {"label":"k3e", "x":15, "y":3}, + + {"label":"k40", "x":0, "y":4, "w":1.25}, + {"label":"k41", "x":1.25, "y":4, "w":1.25}, + {"label":"k42", "x":2.5, "y":4, "w":1.25}, + {"label":"k43", "x":3.75, "y":4, "w":2.75}, + {"label":"k44", "x":6.5, "y":4, "w":1.25}, + {"label":"k46", "x":7.75, "y":4, "w":2.25}, + {"label":"k49", "x":10, "y":4, "w":1.25}, + {"label":"k4a", "x":11.25, "y":4, "w":1.25}, + {"label":"k4c", "x":13, "y":4}, + {"label":"k4d", "x":14, "y":4}, + {"label":"k4e", "x":15, "y":4} + ] + }, + "LAYOUT_split_space_2":{ + "layout": [ + {"label":"k00", "x":0, "y":0}, + {"label":"k01", "x":1, "y":0}, + {"label":"k02", "x":2, "y":0}, + {"label":"k03", "x":3, "y":0}, + {"label":"k04", "x":4, "y":0}, + {"label":"k05", "x":5, "y":0}, + {"label":"k06", "x":6, "y":0}, + {"label":"k07", "x":7, "y":0}, + {"label":"k08", "x":8, "y":0}, + {"label":"k09", "x":9, "y":0}, + {"label":"k0a", "x":10, "y":0}, + {"label":"k0b", "x":11, "y":0}, + {"label":"k0c", "x":12, "y":0}, + {"label":"k0d", "x":13, "y":0}, + {"label":"k0e", "x":14, "y":0}, + {"label":"k0f", "x":15, "y":0}, + + {"label":"k10", "x":0, "y":1, "w":1.5}, + {"label":"k11", "x":1.5, "y":1}, + {"label":"k12", "x":2.5, "y":1}, + {"label":"k13", "x":3.5, "y":1}, + {"label":"k14", "x":4.5, "y":1}, + {"label":"k15", "x":5.5, "y":1}, + {"label":"k16", "x":6.5, "y":1}, + {"label":"k17", "x":7.5, "y":1}, + {"label":"k18", "x":8.5, "y":1}, + {"label":"k19", "x":9.5, "y":1}, + {"label":"k1a", "x":10.5, "y":1}, + {"label":"k1b", "x":11.5, "y":1}, + {"label":"k1c", "x":12.5, "y":1}, + {"label":"k2d", "x":13.75, "y":1, "w":1.25}, + {"label":"k1e", "x":15, "y":1,}, + + {"label":"k20", "x":0, "y":2, "w":1.75}, + {"label":"k21", "x":1.75, "y":2}, + {"label":"k22", "x":2.75, "y":2}, + {"label":"k23", "x":3.75, "y":2}, + {"label":"k24", "x":4.75, "y":2}, + {"label":"k25", "x":5.75, "y":2}, + {"label":"k26", "x":6.75, "y":2}, + {"label":"k27", "x":7.75, "y":2}, + {"label":"k28", "x":8.75, "y":2}, + {"label":"k29", "x":9.75, "y":2}, + {"label":"k2a", "x":10.75, "y":2}, + {"label":"k2b", "x":11.75, "y":2}, + {"label":"k1d", "x":12.75, "y":2}, + {"label":"k2e", "x":15, "y":2}, + + {"label":"k30", "x":0, "y":3, "w":1.25}, + {"label":"k31", "x":1.25, "y":3}, + {"label":"k32", "x":2.25, "y":3}, + {"label":"k33", "x":3.25, "y":3}, + {"label":"k34", "x":4.25, "y":3}, + {"label":"k35", "x":5.25, "y":3}, + {"label":"k36", "x":6.25, "y":3}, + {"label":"k37", "x":7.25, "y":3}, + {"label":"k38", "x":8.25, "y":3}, + {"label":"k39", "x":9.25, "y":3}, + {"label":"k3a", "x":10.25, "y":3}, + {"label":"k3b", "x":11.25, "y":3}, + {"label":"k3c", "x":12.25, "y":3, "w":1.75}, + {"label":"k3d", "x":14, "y":3}, + {"label":"k3e", "x":15, "y":3}, + + {"label":"k40", "x":0, "y":4, "w":1.25}, + {"label":"k41", "x":1.25, "y":4, "w":1.25}, + {"label":"k42", "x":2.5, "y":4, "w":1.25}, + {"label":"k43", "x":3.75, "y":4, "w":2.25}, + {"label":"k44", "x":6, "y":4, "w":1.25}, + {"label":"k46", "x":7.25, "y":4, "w":2.75}, + {"label":"k49", "x":10, "y":4, "w":1.25}, + {"label":"k4a", "x":11.25, "y":4, "w":1.25}, + {"label":"k4c", "x":13, "y":4}, + {"label":"k4d", "x":14, "y":4}, + {"label":"k4e", "x":15, "y":4} + ] + } + } +} \ No newline at end of file diff --git a/keyboards/mokey/ginkgo65/keymaps/default/keymap.c b/keyboards/mokey/ginkgo65/keymaps/default/keymap.c new file mode 100644 index 0000000000..0d411bc9d2 --- /dev/null +++ b/keyboards/mokey/ginkgo65/keymaps/default/keymap.c @@ -0,0 +1,43 @@ +/* Copyright 2021 Ocean + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐ + * │Esc│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │Bspace │Ins│ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤ + * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │Del│ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤ + * │ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter │PgU│ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤ + * │ LShift │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │RShift│ ↑ │PgD│ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤ + * │LCtl│LGui│LAlt│ Space │RAlt│ Fn │ │ ← │ ↓ │ → │ + * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘ + */ + + LAYOUT( + /* 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), +}; diff --git a/keyboards/mokey/ginkgo65/keymaps/via/keymap.c b/keyboards/mokey/ginkgo65/keymaps/via/keymap.c new file mode 100644 index 0000000000..90e7a8e904 --- /dev/null +++ b/keyboards/mokey/ginkgo65/keymaps/via/keymap.c @@ -0,0 +1,50 @@ +/* Copyright 2021 Ocean + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, + BL_TOGG, BL_STEP, BL_DEC, BL_INC, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [2] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [3] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; diff --git a/keyboards/mokey/ginkgo65/keymaps/via/rules.mk b/keyboards/mokey/ginkgo65/keymaps/via/rules.mk new file mode 100644 index 0000000000..36b7ba9cbc --- /dev/null +++ b/keyboards/mokey/ginkgo65/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/mokey/ginkgo65/readme.md b/keyboards/mokey/ginkgo65/readme.md new file mode 100644 index 0000000000..8caa629aef --- /dev/null +++ b/keyboards/mokey/ginkgo65/readme.md @@ -0,0 +1,21 @@ +# Ginkgo65 Multi PCB + +![Ginkgo65](https://raw.githubusercontent.com/rhmokey/123.github.io/main/2021/08/15/hello-world/ginkgo65.png) + +Support Atmega32u4 keyboard,With a variety of configurations + +* Keyboard Maintainer: [mokey](https://github.com/rhmokey) +* Hardware Supported: Atmega32u4 +## Bootloader +* **Physical reset button**: Short press the button on the back of the PCB to enter the Bootloader and flash the firmware + + +Make example for this keyboard (after setting up your build environment): + + make mokey/ginkgo65:default + +Flashing example for this keyboard: + + make mokey/ginkgo65:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). \ No newline at end of file diff --git a/keyboards/mokey/ginkgo65/rules.mk b/keyboards/mokey/ginkgo65/rules.mk new file mode 100644 index 0000000000..4f1faaec80 --- /dev/null +++ b/keyboards/mokey/ginkgo65/rules.mk @@ -0,0 +1,21 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output From 44bfe04f53f7402b1b1934c0353dd70ee3d94a49 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Fri, 15 Oct 2021 00:00:08 +0000 Subject: [PATCH 279/595] [Keyboard] PLX Refactor (#14809) --- keyboards/plx/info.json | 221 ++++++++++++++++++++- keyboards/plx/keymaps/default/keymap.c | 45 +++-- keyboards/plx/keymaps/default_all/keymap.c | 45 +++-- keyboards/plx/keymaps/via/keymap.c | 44 ++-- keyboards/plx/plx.h | 33 ++- keyboards/plx/rules.mk | 2 +- 6 files changed, 315 insertions(+), 75 deletions(-) diff --git a/keyboards/plx/info.json b/keyboards/plx/info.json index a338f1de2c..47f73ada61 100644 --- a/keyboards/plx/info.json +++ b/keyboards/plx/info.json @@ -1,10 +1,219 @@ { - "keyboard_name": "PLX", - "url": "https://peac.design/", - "maintainer": "2Moons", + "keyboard_name": "PLX", + "url": "https://peac.design/", + "maintainer": "2Moons-JP", + "layout_aliases": { + "LAYOUT": "LAYOUT_60_ansi_tsangan" + }, "layouts": { - "LAYOUT": { - "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"!", "x":1, "y":0}, {"label":"@", "x":2, "y":0}, {"label":"#", "x":3, "y":0}, {"label":"$", "x":4, "y":0}, {"label":"%", "x":5, "y":0}, {"label":"^", "x":6, "y":0}, {"label":"&", "x":7, "y":0}, {"label":"*", "x":8, "y":0}, {"label":"(", "x":9, "y":0}, {"label":")", "x":10, "y":0}, {"label":"_", "x":11, "y":0}, {"label":"+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, {"label":"T", "x":5.5, "y":1}, {"label":"Y", "x":6.5, "y":1}, {"label":"U", "x":7.5, "y":1}, {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, {"label":"{", "x":11.5, "y":1}, {"label":"}", "x":12.5, "y":1}, {"label":"|", "x":13.5, "y":1, "w":1.5}, {"label":"Caps Lock", "x":0, "y":2, "w":1.25}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, {"label":"G", "x":5.75, "y":2}, {"label":"H", "x":6.75, "y":2}, {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, {"label":":", "x":10.75, "y":2}, {"label":"\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"Shift", "x":0, "y":3, "w":2.25}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, {"label":"<", "x":9.25, "y":3}, {"label":">", "x":10.25, "y":3}, {"label":"?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":2.25}, {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, {"label":"Win", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5}] + "LAYOUT_60_ansi_tsangan": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"1!", "x":1, "y":0}, + {"label":"2@", "x":2, "y":0}, + {"label":"3#", "x":3, "y":0}, + {"label":"4$", "x":4, "y":0}, + {"label":"5%", "x":5, "y":0}, + {"label":"6^", "x":6, "y":0}, + {"label":"7&", "x":7, "y":0}, + {"label":"8*", "x":8, "y":0}, + {"label":"9(", "x":9, "y":0}, + {"label":"0)", "x":10, "y":0}, + {"label":"-_", "x":11, "y":0}, + {"label":"=+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0, "w":2}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[{", "x":11.5, "y":1}, + {"label":"]}", "x":12.5, "y":1}, + {"label":"\\|", "x":13.5, "y":1, "w":1.5}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";:", "x":10.75, "y":2}, + {"label":"'\"", "x":11.75, "y":2}, + {"label":"Enter", "x":12.75, "y":2, "w":2.25}, + + {"label":"Shift", "x":0, "y":3, "w":2.25}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",<", "x":9.25, "y":3}, + {"label":".>", "x":10.25, "y":3}, + {"label":"/?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":2.75}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.5}, + {"label":"Win", "x":1.5, "y":4}, + {"label":"Alt", "x":2.5, "y":4, "w":1.5}, + {"label":"Space", "x":4, "y":4, "w":7}, + {"label":"Alt", "x":11, "y":4, "w":1.5}, + {"label":"Win", "x":12.5, "y":4}, + {"label":"Ctrl", "x":13.5, "y":4, "w":1.5} + ] + }, + "LAYOUT_60_iso_tsangan": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"1!", "x":1, "y":0}, + {"label":"2\"", "x":2, "y":0}, + {"label":"3\u00a3", "x":3, "y":0}, + {"label":"4$", "x":4, "y":0}, + {"label":"5%", "x":5, "y":0}, + {"label":"6^", "x":6, "y":0}, + {"label":"7&", "x":7, "y":0}, + {"label":"8*", "x":8, "y":0}, + {"label":"9(", "x":9, "y":0}, + {"label":"0)", "x":10, "y":0}, + {"label":"-_", "x":11, "y":0}, + {"label":"=+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0, "w":2}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[{", "x":11.5, "y":1}, + {"label":"]}", "x":12.5, "y":1}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";:", "x":10.75, "y":2}, + {"label":"'@", "x":11.75, "y":2}, + {"label":"#~", "x":12.75, "y":2}, + {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, + + {"label":"Shift", "x":0, "y":3, "w":1.25}, + {"label":"\\|", "x":1.25, "y":3}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",<", "x":9.25, "y":3}, + {"label":".>", "x":10.25, "y":3}, + {"label":"/?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":2.75}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.5}, + {"label":"Win", "x":1.5, "y":4}, + {"label":"Alt", "x":2.5, "y":4, "w":1.5}, + {"label":"Space", "x":4, "y":4, "w":7}, + {"label":"Alt", "x":11, "y":4, "w":1.5}, + {"label":"Win", "x":12.5, "y":4}, + {"label":"Ctrl", "x":13.5, "y":4, "w":1.5} + ] + }, + "LAYOUT_all": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"1!", "x":1, "y":0}, + {"label":"2@", "x":2, "y":0}, + {"label":"3#", "x":3, "y":0}, + {"label":"4$", "x":4, "y":0}, + {"label":"5%", "x":5, "y":0}, + {"label":"6^", "x":6, "y":0}, + {"label":"7&", "x":7, "y":0}, + {"label":"8*", "x":8, "y":0}, + {"label":"9(", "x":9, "y":0}, + {"label":"0)", "x":10, "y":0}, + {"label":"-_", "x":11, "y":0}, + {"label":"=+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0}, + {"label":"Backspace", "x":14, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[{", "x":11.5, "y":1}, + {"label":"]}", "x":12.5, "y":1}, + {"label":"\\|", "x":13.5, "y":1, "w":1.5}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";:", "x":10.75, "y":2}, + {"label":"'\"", "x":11.75, "y":2}, + {"label":"#~", "x":12.75, "y":2}, + {"label":"Enter", "x":13.75, "y":2, "w":1.25}, + + {"label":"Shift", "x":0, "y":3, "w":1.25}, + {"label":"\\|", "x":1.25, "y":3}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",<", "x":9.25, "y":3}, + {"label":".>", "x":10.25, "y":3}, + {"label":"/?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"Fn", "x":14, "y":3}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.5}, + {"label":"Win", "x":1.5, "y":4}, + {"label":"Alt", "x":2.5, "y":4, "w":1.5}, + {"label":"Space", "x":4, "y":4, "w":7}, + {"label":"Alt", "x":11, "y":4, "w":1.5}, + {"label":"Win", "x":12.5, "y":4}, + {"label":"Ctrl", "x":13.5, "y":4, "w":1.5} + ] } } -} \ No newline at end of file +} diff --git a/keyboards/plx/keymaps/default/keymap.c b/keyboards/plx/keymaps/default/keymap.c index 9702b27bd2..31273405f8 100644 --- a/keyboards/plx/keymaps/default/keymap.c +++ b/keyboards/plx/keymaps/default/keymap.c @@ -20,30 +20,31 @@ enum layer_names { _BASE, _FN, - _MEDIA }; + _MEDIA +}; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_BASE] = LAYOUT( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL - ), + [_BASE] = LAYOUT_60_ansi_tsangan( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL + ), - [_FN] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______ - ), + [_FN] = LAYOUT_60_ansi_tsangan( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______ + ), - [_MEDIA] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______ - ) + [_MEDIA] = LAYOUT_60_ansi_tsangan( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______ + ) }; diff --git a/keyboards/plx/keymaps/default_all/keymap.c b/keyboards/plx/keymaps/default_all/keymap.c index 40350c4759..cf460e5234 100644 --- a/keyboards/plx/keymaps/default_all/keymap.c +++ b/keyboards/plx/keymaps/default_all/keymap.c @@ -20,30 +20,31 @@ enum layer_names { _BASE, _FN, - _MEDIA }; + _MEDIA +}; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_BASE] = LAYOUT( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, - KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FN), - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL - ), + [_BASE] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, + KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FN), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL + ), - [_FN] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______ - ), + [_FN] = LAYOUT_all( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______ + ), - [_MEDIA] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______ - ) + [_MEDIA] = LAYOUT_all( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______ + ) }; diff --git a/keyboards/plx/keymaps/via/keymap.c b/keyboards/plx/keymaps/via/keymap.c index e988833c2e..cf460e5234 100644 --- a/keyboards/plx/keymaps/via/keymap.c +++ b/keyboards/plx/keymaps/via/keymap.c @@ -20,31 +20,31 @@ enum layer_names { _BASE, _FN, - _MEDIA, + _MEDIA }; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_BASE] = LAYOUT_all( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, - KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FN), - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL - ), + [_BASE] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, + KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FN), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL + ), - [_FN] = LAYOUT_all( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______ - ), + [_FN] = LAYOUT_all( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______ + ), - [_MEDIA] = LAYOUT_all( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______ - ) + [_MEDIA] = LAYOUT_all( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______ + ) }; diff --git a/keyboards/plx/plx.h b/keyboards/plx/plx.h index 9776905f80..22d7bd0213 100644 --- a/keyboards/plx/plx.h +++ b/keyboards/plx/plx.h @@ -17,7 +17,21 @@ #include "quantum.h" -#define XXX KC_NO//readabilty +#define XXX KC_NO // readability + +/* + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ ┌───────┐ + * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0A │0B │0C │0D │0E │ │0D │ 2u Backspace + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤ └─┬─────┤ + * │10 │11 │12 │13 │14 │15 │16 │17 │18 │19 │1A │1B │1C │1D │ │ │ + * 2.25u ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ ┌──┴┐2D │ ISO Enter + * LShift │20 │21 │22 │23 │24 │25 │26 │27 │28 │29 │2A │2B │2D │ │2C │ │ + * ┌────────┐ ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤ ┌─┴───┴────┤ + * │30 │ │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3A │3B │3C │3D │ │3C │ 2.75u RShift + * └────────┘ ├────┴┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴───┴──┬┴───┴┬───┬─┴───┤ └──────────┘ + * │40 │41 │42 │46 │4B │4C │4D │ + * └─────┴───┴─────┴───────────────────────────┴─────┴───┴─────┘ + */ /* This a shortcut to help you visually see your layout. * @@ -27,7 +41,7 @@ * The second converts the arguments into a two-dimensional array which * represents the switch matrix. */ -#define LAYOUT( \ +#define LAYOUT_60_ansi_tsangan( \ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, \ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, \ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2D, \ @@ -42,6 +56,21 @@ { k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, XXX, k4B, k4C, k4D} \ } +#define LAYOUT_60_iso_tsangan( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, \ + k40, k41, k42, k46, k4B, k4C, k4D \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, XXX}, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, XXX}, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D}, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, XXX}, \ + { k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, XXX, k4B, k4C, k4D} \ +} + #define LAYOUT_all( \ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, \ diff --git a/keyboards/plx/rules.mk b/keyboards/plx/rules.mk index a3ee665756..419033f64c 100644 --- a/keyboards/plx/rules.mk +++ b/keyboards/plx/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = no # Audio control and System control CONSOLE_ENABLE = no # Console for debug From c2d72a60f0f874e5f0c6836ef94526a2704a2e0b Mon Sep 17 00:00:00 2001 From: Alex Meyer Date: Thu, 14 Oct 2021 20:54:19 -0400 Subject: [PATCH 280/595] remove Bracket Pair Colorizer recommendation (#14816) As of v1.60, vscode has a much faster built-in method of colorizing bracket pairs, making the extension unnecessary. https://code.visualstudio.com/blogs/2021/09/29/bracket-pair-colorization --- .vscode/extensions.json | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/.vscode/extensions.json b/.vscode/extensions.json index 697686cd59..889d9d610e 100644 --- a/.vscode/extensions.json +++ b/.vscode/extensions.json @@ -5,7 +5,6 @@ "xaver.clang-format", "ms-vscode.cpptools", "bierner.github-markdown-preview", - "donjayamanne.git-extension-pack", - "CoenraadS.bracket-pair-colorizer-2" + "donjayamanne.git-extension-pack" ] } From dd42387d9fd288db22bd5c73664471220a6de8c2 Mon Sep 17 00:00:00 2001 From: Tom Date: Fri, 15 Oct 2021 03:11:01 +0200 Subject: [PATCH 281/595] [Keymap] Add keebio iris layout beakl 15 (#14762) --- keyboards/keebio/iris/keymaps/sq5rix/config.h | 25 +++ keyboards/keebio/iris/keymaps/sq5rix/keymap.c | 185 ++++++++++++++++++ .../keebio/iris/keymaps/sq5rix/readme.md | 17 ++ keyboards/keebio/iris/keymaps/sq5rix/rules.mk | 4 + 4 files changed, 231 insertions(+) create mode 100644 keyboards/keebio/iris/keymaps/sq5rix/config.h create mode 100644 keyboards/keebio/iris/keymaps/sq5rix/keymap.c create mode 100644 keyboards/keebio/iris/keymaps/sq5rix/readme.md create mode 100644 keyboards/keebio/iris/keymaps/sq5rix/rules.mk diff --git a/keyboards/keebio/iris/keymaps/sq5rix/config.h b/keyboards/keebio/iris/keymaps/sq5rix/config.h new file mode 100644 index 0000000000..8c576917e8 --- /dev/null +++ b/keyboards/keebio/iris/keymaps/sq5rix/config.h @@ -0,0 +1,25 @@ +/* +Copyright 2017 Danny Nguyen + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once +#define EE_HANDS +#define TAPPING_TERM 164 +#define IGNORE_MOD_TAP_INTERRUPT +#define PERMISSIVE_HOLD +#define RGBLIGHT_LAYERS +#define ENCODER_RESOLUTION 4 +#define ENCODER_DEFAULT_POS 0x3 diff --git a/keyboards/keebio/iris/keymaps/sq5rix/keymap.c b/keyboards/keebio/iris/keymaps/sq5rix/keymap.c new file mode 100644 index 0000000000..19a939a55b --- /dev/null +++ b/keyboards/keebio/iris/keymaps/sq5rix/keymap.c @@ -0,0 +1,185 @@ +// Copyright 2021 Tomasz Wawer (@sq5rix) +// SPDX-License-Identifier: GPL-2.0-or-later + +#include QMK_KEYBOARD_H + +enum layers { + _BEAKL15, + _LOWER, + _RAISE, + _MOUSE +}; + +enum custom_keycodes { + LT_DAT = SAFE_RANGE, + LT_COM, + LT_QUOT +}; + +#define LOWER LT(_LOWER, KC_ENT) +#define LOWER2 LT(_LOWER, KC_T) +#define RAISE LT(_RAISE, KC_SPC) +#define RAISE2 LT(_RAISE, KC_BSPC) +#define MOUSE LT(_MOUSE, KC_A) + +#define SH_ESC MT(MOD_LSFT, KC_ESC) +#define SH_CWD MT(MOD_LALT, KC_BSPC) +#define SH_LTAB MT(MOD_LALT, KC_TAB) +#define SH_UND MT(MOD_LCTL, KC_UNDS) +#define SH_Z MT(MOD_LCTL, KC_Z) + +#define SH_LGS MT(MOD_LGUI, KC_B) +#define AL_I ALGR_T(KC_I) +#define AL_N ALGR_T(KC_N) + +// Tap Dance definitions +enum { + TD_S +}; +qk_tap_dance_action_t tap_dance_actions[] = { + [TD_S] = ACTION_TAP_DANCE_DOUBLE(KC_S, KC_Z), +}; + +bool sh_key(keyrecord_t *record, uint8_t sk, uint8_t nk); +bool sh_key8(keyrecord_t *record, uint8_t sk, uint8_t nk); + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_BEAKL15] = LAYOUT( + TG(_RAISE), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_DEL, + SH_LTAB, KC_Q, KC_H, KC_O, KC_U, KC_X, KC_G, KC_C, KC_R, KC_F, KC_Z, KC_LGUI, + SH_UND, KC_Y, AL_I, KC_E, MOUSE, LT_DAT, KC_D, TD(TD_S),LOWER2, AL_N, KC_B, KC_SCLN, + KC_LSFT, KC_J, KC_SLSH, LT_COM, KC_K, LT_QUOT, RGB_TOG, BL_TOGG, KC_W, KC_M, KC_L, KC_P, KC_V, KC_RSFT, + SH_Z, LOWER, RAISE, SH_ESC, RAISE2, SH_LTAB + ), + + [_LOWER] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, KC_LT, KC_DLR, KC_GT, KC_EXLM, _______, KC_LBRC, KC_UNDS, KC_RBRC, KC_EXLM, _______, + _______, KC_BSLS, KC_LPRN, KC_DQUO, KC_RPRN, KC_HASH, KC_PERC, KC_LCBR, KC_EQL, KC_RCBR, KC_PIPE, _______, + _______, KC_SCLN, KC_SLSH, KC_ASTR, KC_PLUS, _______, _______, _______, _______, KC_AMPR, KC_CIRC, KC_TILD, KC_SCLN, _______, + _______, _______, _______, _______, _______, _______ + + ), + + [_RAISE] = LAYOUT( + _______, KC_VOLD, KC_VOLU, KC_MUTE, KC_BRIGHTNESS_DOWN, KC_BRIGHTNESS_UP, KC_PSCREEN, _______, _______, _______, _______, RESET, + _______, KC_SLSH, KC_6, KC_5, KC_4, KC_EQL, KC_CIRC, KC_PGUP, KC_UP, KC_PGDN, _______, RGB_VAI, + _______, KC_3, KC_2, KC_1, KC_0, KC_DOT, KC_EQL, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, + _______, KC_ASTR, KC_9, KC_8, KC_7, KC_PLUS, _______, _______, KC_PLUS, KC_HOME, KC_COLN, KC_END, _______, RGB_MOD, + _______, _______, _______, _______, _______, _______ + ), + + [_MOUSE] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, KC_BTN1, KC_MS_U, KC_BTN2, _______, _______, + _______, _______, _______, KC_BTN1, _______, _______, _______, KC_MS_L, KC_MS_D, KC_MS_R, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_BTN3, _______, _______, _______, + _______, _______, _______, _______, _______, _______ + ) +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case LT_DAT: + return sh_key8(record, KC_2, KC_DOT); + case LT_COM: + return sh_key8(record, KC_1, KC_COMM); + case LT_QUOT: + return sh_key(record, KC_GRV, KC_QUOT); + default: + return true; + } +} + +bool sh_key(keyrecord_t *record, uint8_t sk, uint8_t nk){ + if (record->event.pressed) { + if (get_mods() & MOD_BIT(KC_LSHIFT) || get_mods() & MOD_BIT(KC_RSHIFT)){ + unregister_code(KC_LSFT); + unregister_code(KC_RSFT); + register_code(sk); + } else { + register_code(nk); + } + } + else { + unregister_code16(sk); + unregister_code(nk); + } + return false; +} + +bool sh_key8(keyrecord_t *record, uint8_t sk, uint8_t nk){ + if (record->event.pressed) { + if (get_mods() & MOD_BIT(KC_LSHIFT) || get_mods() & MOD_BIT(KC_RSHIFT)){ + register_code(sk); + } else { + register_code(nk); + } + } + else { + unregister_code(sk); + unregister_code(nk); + } + return false; +} + +bool encoder_update_user(uint8_t index, bool clockwise) { + if (index == 0) { + if (clockwise) { + tap_code16(C(G(KC_LEFT))); + } else { + tap_code16(C(G(KC_RGHT))); + } + } + // tmux screen + else if (index == 1) { + switch(biton32(layer_state)){ + case 0: + if (clockwise) { + send_string(SS_LCTL("B")"p"); + } else { + send_string(SS_LCTL("B")"n"); + } + break; + case _RAISE: + if (clockwise) { + tap_code16(C(G(KC_PGUP))); + } else { + tap_code16(C(G(KC_PGDN))); + } + break; + } + } + return true; +} + +const rgblight_segment_t PROGMEM raise_layer[] = RGBLIGHT_LAYER_SEGMENTS( + {1, 12, HSV_RED} +); +const rgblight_segment_t PROGMEM lower_layer[] = RGBLIGHT_LAYER_SEGMENTS( + {1, 12, HSV_BLUE} +); +const rgblight_segment_t PROGMEM mouse_layer[] = RGBLIGHT_LAYER_SEGMENTS( + {1, 12, HSV_GREEN} +); + +// Now define the array of layers. Later layers take precedence +const rgblight_segment_t* const PROGMEM my_rgb_layers[] = RGBLIGHT_LAYERS_LIST( + lower_layer, + raise_layer, + mouse_layer +); + +void keyboard_post_init_user(void) { + // Enable the LED layers + rgblight_layers = my_rgb_layers; +} + +layer_state_t layer_state_set_user(layer_state_t state) { + rgblight_set_layer_state(0, layer_state_cmp(state, 2)); + rgblight_set_layer_state(1, layer_state_cmp(state, 3)); + rgblight_set_layer_state(2, layer_state_cmp(state, 4)); + return state; +} + diff --git a/keyboards/keebio/iris/keymaps/sq5rix/readme.md b/keyboards/keebio/iris/keymaps/sq5rix/readme.md new file mode 100644 index 0000000000..96370c74cd --- /dev/null +++ b/keyboards/keebio/iris/keymaps/sq5rix/readme.md @@ -0,0 +1,17 @@ +BEAKL-15 keymap for keebio iris +@sq5rix tom wawer +https://deskthority.net/wiki/BEAKL#BEAKL_15 + +Modern keyboard map easy to learn +very effective to type + +esc F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 Del + q h o u x g c r f z + - y i e a . d s t n b ; + j / , , k w m l p v + + z enter space esc bkspc tab + +lots of special functions +three layers with puncs, numbers and mouse + diff --git a/keyboards/keebio/iris/keymaps/sq5rix/rules.mk b/keyboards/keebio/iris/keymaps/sq5rix/rules.mk new file mode 100644 index 0000000000..3fc2bd9768 --- /dev/null +++ b/keyboards/keebio/iris/keymaps/sq5rix/rules.mk @@ -0,0 +1,4 @@ +RGBLIGHT_ENABLE = yes +TAP_DANCE_ENABLE = yes +LTO_ENABLE = yes +MOUSEKEY_ENABLE = yes From b7a346600c0bf1292800bbbbe48e658718722d90 Mon Sep 17 00:00:00 2001 From: Ryan Date: Fri, 15 Oct 2021 12:45:33 +1100 Subject: [PATCH 282/595] [Docs] Clean up reference_info_json.md (#14806) --- docs/reference_info_json.md | 94 ++++++++++++++++++++----------------- 1 file changed, 51 insertions(+), 43 deletions(-) diff --git a/docs/reference_info_json.md b/docs/reference_info_json.md index 646b6b5cc9..b2e6cae28e 100644 --- a/docs/reference_info_json.md +++ b/docs/reference_info_json.md @@ -9,33 +9,39 @@ You can create `info.json` files at every level under `qmk_firmware/keyboards/ Date: Thu, 14 Oct 2021 23:22:55 -0500 Subject: [PATCH 283/595] [Keyboard] Add MK61-RGB-ANSI keyboard (#14795) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- keyboards/fjlabs/mk61rgbansi/config.h | 121 ++++++++++++++++++ keyboards/fjlabs/mk61rgbansi/info.json | 76 +++++++++++ .../mk61rgbansi/keymaps/default/keymap.c | 40 ++++++ .../fjlabs/mk61rgbansi/keymaps/via/keymap.c | 58 +++++++++ .../fjlabs/mk61rgbansi/keymaps/via/rules.mk | 1 + keyboards/fjlabs/mk61rgbansi/mk61rgbansi.c | 13 ++ keyboards/fjlabs/mk61rgbansi/mk61rgbansi.h | 32 +++++ keyboards/fjlabs/mk61rgbansi/readme.md | 14 ++ keyboards/fjlabs/mk61rgbansi/rules.mk | 26 ++++ 9 files changed, 381 insertions(+) create mode 100644 keyboards/fjlabs/mk61rgbansi/config.h create mode 100644 keyboards/fjlabs/mk61rgbansi/info.json create mode 100644 keyboards/fjlabs/mk61rgbansi/keymaps/default/keymap.c create mode 100644 keyboards/fjlabs/mk61rgbansi/keymaps/via/keymap.c create mode 100644 keyboards/fjlabs/mk61rgbansi/keymaps/via/rules.mk create mode 100644 keyboards/fjlabs/mk61rgbansi/mk61rgbansi.c create mode 100644 keyboards/fjlabs/mk61rgbansi/mk61rgbansi.h create mode 100644 keyboards/fjlabs/mk61rgbansi/readme.md create mode 100644 keyboards/fjlabs/mk61rgbansi/rules.mk diff --git a/keyboards/fjlabs/mk61rgbansi/config.h b/keyboards/fjlabs/mk61rgbansi/config.h new file mode 100644 index 0000000000..4d459b6f88 --- /dev/null +++ b/keyboards/fjlabs/mk61rgbansi/config.h @@ -0,0 +1,121 @@ +/* +Copyright 2021 + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x7074 // FJLabs +#define PRODUCT_ID 0x1011 // mk61-rgb-ansi +#define DEVICE_VER 0x0001 // Version 1 +#define MANUFACTURER Mechanical Keyboards LLC +#define PRODUCT MK61-RGB-ANSI + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ + +// Checked with Eagle Schematic +#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6 } +#define MATRIX_COL_PINS { C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, B3, B2, B1 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* Define RGB Underglow */ +#define RGB_DI_PIN F7 +#define RGBLED_NUM 64 +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE +#define RGBLIGHT_LIMIT_VAL 108 +#define RGB_VAL_STEP 12 +#define RGBLIGHT_DEFAULT_SPD 144 +#define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_SWIRL +/* #define RGBLIGHT_LAYER_BLINK*/ + +/* Define less important options */ + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION diff --git a/keyboards/fjlabs/mk61rgbansi/info.json b/keyboards/fjlabs/mk61rgbansi/info.json new file mode 100644 index 0000000000..84cc8a46ae --- /dev/null +++ b/keyboards/fjlabs/mk61rgbansi/info.json @@ -0,0 +1,76 @@ +{ + "keyboard_name": "MK61-RGB-ANSI", + "url": "https://www.fjlaboratories.com/", + "maintainer": "Mechanical Keyboards, LLC", + "layouts": { + "LAYOUT_60_ansi": { + "layout": [ + {"x": 0, "y": 0}, + {"x": 1, "y": 0}, + {"x": 2, "y": 0}, + {"x": 3, "y": 0}, + {"x": 4, "y": 0}, + {"x": 5, "y": 0}, + {"x": 6, "y": 0}, + {"x": 7, "y": 0}, + {"x": 8, "y": 0}, + {"x": 9, "y": 0}, + {"x": 10, "y": 0}, + {"x": 11, "y": 0}, + {"x": 12, "y": 0}, + {"x": 13, "y": 0, "w": 2}, + + {"x": 0, "y": 1, "w": 1.5}, + {"x": 1.5, "y": 1}, + {"x": 2.5, "y": 1}, + {"x": 3.5, "y": 1}, + {"x": 4.5, "y": 1}, + {"x": 5.5, "y": 1}, + {"x": 6.5, "y": 1}, + {"x": 7.5, "y": 1}, + {"x": 8.5, "y": 1}, + {"x": 9.5, "y": 1}, + {"x": 10.5, "y": 1}, + {"x": 11.5, "y": 1}, + {"x": 12.5, "y": 1}, + {"x": 13.5, "y": 1, "w": 1.5}, + + {"x": 0, "y": 2, "w": 1.75}, + {"x": 1.75, "y": 2}, + {"x": 2.75, "y": 2}, + {"x": 3.75, "y": 2}, + {"x": 4.75, "y": 2}, + {"x": 5.75, "y": 2}, + {"x": 6.75, "y": 2}, + {"x": 7.75, "y": 2}, + {"x": 8.75, "y": 2}, + {"x": 9.75, "y": 2}, + {"x": 10.75, "y": 2}, + {"x": 11.75, "y": 2}, + {"x": 12.75, "y": 2, "w": 2.25}, + + {"x": 0, "y": 3, "w": 2.25}, + {"x": 2.25, "y": 3}, + {"x": 3.25, "y": 3}, + {"x": 4.25, "y": 3}, + {"x": 5.25, "y": 3}, + {"x": 6.25, "y": 3}, + {"x": 7.25, "y": 3}, + {"x": 8.25, "y": 3}, + {"x": 9.25, "y": 3}, + {"x": 10.25, "y": 3}, + {"x": 11.25, "y": 3}, + {"x": 12.25, "y": 3, "w": 2.75}, + + {"x": 0, "y": 4, "w": 1.25}, + {"x": 1.25, "y": 4, "w": 1.25}, + {"x": 2.5, "y": 4, "w": 1.25}, + {"x": 3.75, "y": 4, "w": 6.25}, + {"x": 10, "y": 4, "w": 1.25}, + {"x": 11.25, "y": 4, "w": 1.25}, + {"x": 12.5, "y": 4, "w": 1.25}, + {"x": 13.75, "y": 4, "w": 1.25} + ] + } + } +} diff --git a/keyboards/fjlabs/mk61rgbansi/keymaps/default/keymap.c b/keyboards/fjlabs/mk61rgbansi/keymaps/default/keymap.c new file mode 100644 index 0000000000..7873f0e5e5 --- /dev/null +++ b/keyboards/fjlabs/mk61rgbansi/keymaps/default/keymap.c @@ -0,0 +1,40 @@ +/* +Copyright 2021 +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + +enum layers { + _LAYER0, + _LAYER1, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_LAYER0] = LAYOUT_60_ansi( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTRL + ), + + [_LAYER1] = LAYOUT_60_ansi( + KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUSE, RESET, + KC_TRNS, RGB_SPI, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, NK_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) + +}; \ No newline at end of file diff --git a/keyboards/fjlabs/mk61rgbansi/keymaps/via/keymap.c b/keyboards/fjlabs/mk61rgbansi/keymaps/via/keymap.c new file mode 100644 index 0000000000..2e4dac7fc2 --- /dev/null +++ b/keyboards/fjlabs/mk61rgbansi/keymaps/via/keymap.c @@ -0,0 +1,58 @@ +/* +Copyright 2021 +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + +enum layers { + _LAYER0, + _LAYER1, + _LAYER2, + _LAYER3, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [_LAYER0] = LAYOUT_60_ansi( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTRL + ), + + [_LAYER1] = LAYOUT_60_ansi( + KC_GESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUSE, RESET, + KC_TRNS, RGB_SPI, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, NK_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + [_LAYER2] = LAYOUT_60_ansi( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + [_LAYER3] = LAYOUT_60_ansi( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + +}; diff --git a/keyboards/fjlabs/mk61rgbansi/keymaps/via/rules.mk b/keyboards/fjlabs/mk61rgbansi/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/fjlabs/mk61rgbansi/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/fjlabs/mk61rgbansi/mk61rgbansi.c b/keyboards/fjlabs/mk61rgbansi/mk61rgbansi.c new file mode 100644 index 0000000000..5bf82ad443 --- /dev/null +++ b/keyboards/fjlabs/mk61rgbansi/mk61rgbansi.c @@ -0,0 +1,13 @@ +/* Copyright 2021 +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include "mk61rgbansi.h" diff --git a/keyboards/fjlabs/mk61rgbansi/mk61rgbansi.h b/keyboards/fjlabs/mk61rgbansi/mk61rgbansi.h new file mode 100644 index 0000000000..8ab4873e08 --- /dev/null +++ b/keyboards/fjlabs/mk61rgbansi/mk61rgbansi.h @@ -0,0 +1,32 @@ +/* +Copyright 2021 +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "quantum.h" + +/* MK61-RGB-ANSI Keymap Definitions */ +#define LAYOUT_60_ansi( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3C, \ + K40, K41, K42, K45, K49, K4A, K4C, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, KC_NO, K3C, KC_NO }, \ + { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, K49, K4A, KC_NO, K4C, K4D } \ +} diff --git a/keyboards/fjlabs/mk61rgbansi/readme.md b/keyboards/fjlabs/mk61rgbansi/readme.md new file mode 100644 index 0000000000..6425f09406 --- /dev/null +++ b/keyboards/fjlabs/mk61rgbansi/readme.md @@ -0,0 +1,14 @@ +# Mechanical Keyboards, LLC MK61-RGB-ANSI + +The following is the QMK Firmware for the Mechanical Keyboards, LLC MK61-RGB-ANSI PCB. + +--- + +* Keyboard Maintainer: Mechanical Keyboards, LLC +* Hardware Supported: MK61-RGB-ANSI + +Make example for this keyboard (after setting up your build environment): + + make fjlabs/mk61-rgb-ansi:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). You can enter the bootloader by pressing the reset button on the back of the PCB. diff --git a/keyboards/fjlabs/mk61rgbansi/rules.mk b/keyboards/fjlabs/mk61rgbansi/rules.mk new file mode 100644 index 0000000000..dbd20b9e1e --- /dev/null +++ b/keyboards/fjlabs/mk61rgbansi/rules.mk @@ -0,0 +1,26 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency +F_CPU = 8000000 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output + +LAYOUTS = 60_ansi From 40bc5a81923d16f6c9c2a3a05616b8cb1859b01e Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Fri, 15 Oct 2021 22:07:33 +0100 Subject: [PATCH 284/595] Enable CLI flashing via mdloader (#14729) * Enable CLI flashing via mdloader * remove flag * Update qmk flash help --- docs/feature_userspace.md | 2 +- lib/python/qmk/cli/flash.py | 14 +++++++++----- platforms/arm_atsam/flash.mk | 11 +++++++++++ 3 files changed, 21 insertions(+), 6 deletions(-) diff --git a/docs/feature_userspace.md b/docs/feature_userspace.md index 115ab71753..8c617fe33a 100644 --- a/docs/feature_userspace.md +++ b/docs/feature_userspace.md @@ -252,4 +252,4 @@ Also, holding Shift will add the flash target (`:flash`) to the command. Holdin And for the boards that lack a shift key, or that you want to always attempt the flashing part, you can add `FLASH_BOOTLOADER = yes` to the `rules.mk` of that keymap. -?> This should flash the newly compiled firmware automatically, using the correct utility, based on the bootloader settings (or default to just generating the HEX file). However, it should be noted that this may not work on all systems. AVRDUDE doesn't work on WSL, namely. And this doesn't support BootloadHID or mdloader. +?> This should flash the newly compiled firmware automatically, using the correct utility, based on the bootloader settings (or default to just generating the HEX file). However, it should be noted that this may not work on all systems. AVRDUDE doesn't work on WSL, namely. diff --git a/lib/python/qmk/cli/flash.py b/lib/python/qmk/cli/flash.py index c2d9e09c69..28e48a4101 100644 --- a/lib/python/qmk/cli/flash.py +++ b/lib/python/qmk/cli/flash.py @@ -18,17 +18,21 @@ def print_bootloader_help(): """Prints the available bootloaders listed in docs.qmk.fm. """ cli.log.info('Here are the available bootloaders:') + cli.echo('\tavrdude') + cli.echo('\tbootloadhid') cli.echo('\tdfu') + cli.echo('\tdfu-util') + cli.echo('\tmdloader') + cli.echo('\tst-flash') + cli.echo('\tst-link-cli') + cli.log.info('Enhanced variants for split keyboards:') + cli.echo('\tavrdude-split-left') + cli.echo('\tavrdude-split-right') cli.echo('\tdfu-ee') cli.echo('\tdfu-split-left') cli.echo('\tdfu-split-right') - cli.echo('\tavrdude') - cli.echo('\tBootloadHID') - cli.echo('\tdfu-util') cli.echo('\tdfu-util-split-left') cli.echo('\tdfu-util-split-right') - cli.echo('\tst-link-cli') - cli.echo('\tst-flash') cli.echo('For more info, visit https://docs.qmk.fm/#/flashing') diff --git a/platforms/arm_atsam/flash.mk b/platforms/arm_atsam/flash.mk index f31d4b4d95..8152610ceb 100644 --- a/platforms/arm_atsam/flash.mk +++ b/platforms/arm_atsam/flash.mk @@ -3,9 +3,20 @@ # Architecture or project specific options # +MDLOADER_CLI ?= mdloader + +define EXEC_MDLOADER + $(MDLOADER_CLI) --first --download $(BUILD_DIR)/$(TARGET).bin --restart +endef + +mdloader: bin + $(call EXEC_MDLOADER) + flash: bin ifneq ($(strip $(PROGRAM_CMD)),) $(UNSYNC_OUTPUT_CMD) && $(PROGRAM_CMD) +else ifeq ($(strip $(ARM_ATSAM)),SAMD51J18A) + $(UNSYNC_OUTPUT_CMD) && $(call EXEC_MDLOADER) else $(PRINT_OK); $(SILENT) || printf "$(MSG_FLASH_ARCH)" endif From c8b00b2e913bac3d7ad495f6a00cfc30b65952c7 Mon Sep 17 00:00:00 2001 From: Aaron Paterson Date: Fri, 15 Oct 2021 20:43:03 -0400 Subject: [PATCH 285/595] Update documentation because GPIO functions are no longer in quantum.h (#14826) * GPIO functions are no longer in quantum.h * Update docs/internals_gpio_control.md Co-authored-by: Ryan Co-authored-by: Ryan --- docs/internals_gpio_control.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/internals_gpio_control.md b/docs/internals_gpio_control.md index dcff928c70..21a3bd661e 100644 --- a/docs/internals_gpio_control.md +++ b/docs/internals_gpio_control.md @@ -4,7 +4,7 @@ QMK has a GPIO control abstraction layer which is microcontroller agnostic. This ## Functions :id=functions -The following functions can provide basic control of GPIOs and are found in `quantum/quantum.h`. +The following functions provide basic control of GPIOs and are found in `tmk_core/common//gpio.h`. |Function |Description | Old AVR Examples | Old ChibiOS/ARM Examples | |------------------------|--------------------------------------------------|-------------------------------------------------|-------------------------------------------------| From 83e978da1fba4cfbb76dc22e05aa656dba8c1c3e Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Sat, 16 Oct 2021 02:58:48 +0100 Subject: [PATCH 286/595] Further tidy up of STM32 eeprom emulation (#14591) --- common_features.mk | 39 +++------------------------ quantum/mcu_selection.mk | 5 ++++ tmk_core/common/chibios/flash_stm32.c | 4 +-- 3 files changed, 10 insertions(+), 38 deletions(-) diff --git a/common_features.mk b/common_features.mk index 3fe834219f..6a9754e58e 100644 --- a/common_features.mk +++ b/common_features.mk @@ -153,51 +153,18 @@ else ifeq ($(PLATFORM),AVR) # Automatically provided by avr-libc, nothing required else ifeq ($(PLATFORM),CHIBIOS) - ifeq ($(MCU_SERIES), STM32F3xx) + ifneq ($(filter STM32F3xx_% STM32F1xx_% %_STM32F401xC %_STM32F401xE %_STM32F405xG %_STM32F411xE %_STM32F072xB %_STM32F042x6, $(MCU_SERIES)_$(MCU_LDSCRIPT)),) OPT_DEFS += -DEEPROM_DRIVER COMMON_VPATH += $(DRIVER_PATH)/eeprom SRC += eeprom_driver.c SRC += $(PLATFORM_COMMON_DIR)/eeprom_stm32.c SRC += $(PLATFORM_COMMON_DIR)/flash_stm32.c - OPT_DEFS += -DEEPROM_EMU_STM32F303xC - else ifeq ($(MCU_SERIES), STM32F1xx) - OPT_DEFS += -DEEPROM_DRIVER - COMMON_VPATH += $(DRIVER_PATH)/eeprom - SRC += eeprom_driver.c - SRC += $(PLATFORM_COMMON_DIR)/eeprom_stm32.c - SRC += $(PLATFORM_COMMON_DIR)/flash_stm32.c - OPT_DEFS += -DEEPROM_EMU_STM32F103xB - else ifeq ($(MCU_SERIES)_$(MCU_LDSCRIPT), STM32F0xx_STM32F072xB) - OPT_DEFS += -DEEPROM_DRIVER - COMMON_VPATH += $(DRIVER_PATH)/eeprom - SRC += eeprom_driver.c - SRC += $(PLATFORM_COMMON_DIR)/eeprom_stm32.c - SRC += $(PLATFORM_COMMON_DIR)/flash_stm32.c - OPT_DEFS += -DEEPROM_EMU_STM32F072xB - else ifneq ($(filter $(MCU_SERIES)_$(MCU_LDSCRIPT),STM32F4xx_STM32F401xC STM32F4xx_STM32F401xE STM32F4xx_STM32F411xE STM32F4xx_STM32F405xG),) - OPT_DEFS += -DEEPROM_DRIVER - COMMON_VPATH += $(DRIVER_PATH)/eeprom - SRC += eeprom_driver.c - SRC += $(PLATFORM_COMMON_DIR)/eeprom_stm32.c - SRC += $(PLATFORM_COMMON_DIR)/flash_stm32.c - OPT_DEFS += -DEEPROM_EMU_STM32F401xC - else ifeq ($(MCU_SERIES)_$(MCU_LDSCRIPT), STM32F0xx_STM32F042x6) - # Stack sizes: Since this chip has limited RAM capacity, the stack area needs to be reduced. - # This ensures that the EEPROM page buffer fits into RAM - USE_PROCESS_STACKSIZE = 0x600 - USE_EXCEPTIONS_STACKSIZE = 0x300 - - OPT_DEFS += -DEEPROM_DRIVER - COMMON_VPATH += $(DRIVER_PATH)/eeprom - SRC += eeprom_driver.c - SRC += $(PLATFORM_COMMON_DIR)/eeprom_stm32.c - SRC += $(PLATFORM_COMMON_DIR)/flash_stm32.c - OPT_DEFS += -DEEPROM_EMU_STM32F042x6 else ifneq ($(filter $(MCU_SERIES),STM32L0xx STM32L1xx),) OPT_DEFS += -DEEPROM_DRIVER COMMON_VPATH += $(DRIVER_PATH)/eeprom COMMON_VPATH += $(PLATFORM_PATH)/$(PLATFORM_KEY)/$(DRIVER_DIR)/eeprom - SRC += eeprom_driver.c eeprom_stm32_L0_L1.c + SRC += eeprom_driver.c + SRC += eeprom_stm32_L0_L1.c else # This will effectively work the same as "transient" if not supported by the chip SRC += $(PLATFORM_COMMON_DIR)/eeprom_teensy.c diff --git a/quantum/mcu_selection.mk b/quantum/mcu_selection.mk index 92e3a7c923..622b4a82f8 100644 --- a/quantum/mcu_selection.mk +++ b/quantum/mcu_selection.mk @@ -138,6 +138,11 @@ ifneq ($(findstring STM32F042, $(MCU)),) # UF2 settings UF2_FAMILY ?= STM32F0 + + # Stack sizes: Since this chip has limited RAM capacity, the stack area needs to be reduced. + # This ensures that the EEPROM page buffer fits into RAM + USE_PROCESS_STACKSIZE = 0x600 + USE_EXCEPTIONS_STACKSIZE = 0x300 endif ifneq ($(findstring STM32F072, $(MCU)),) diff --git a/tmk_core/common/chibios/flash_stm32.c b/tmk_core/common/chibios/flash_stm32.c index 8f10903d3d..35fb0eebdb 100644 --- a/tmk_core/common/chibios/flash_stm32.c +++ b/tmk_core/common/chibios/flash_stm32.c @@ -19,11 +19,11 @@ #include #include "flash_stm32.h" -#if defined(EEPROM_EMU_STM32F103xB) +#if defined(STM32F1XX) # define FLASH_SR_WRPERR FLASH_SR_WRPRTERR #endif -#if defined(EEPROM_EMU_STM32F401xC) +#if defined(STM32F4XX) # define FLASH_SR_PGERR (FLASH_SR_PGSERR | FLASH_SR_PGPERR | FLASH_SR_PGAERR) # define FLASH_KEY1 0x45670123U From 8bb1fd04d4d4501a7bc1312e10d1fa639851fd8f Mon Sep 17 00:00:00 2001 From: stanrc85 <47038504+stanrc85@users.noreply.github.com> Date: Fri, 15 Oct 2021 22:00:19 -0400 Subject: [PATCH 287/595] [Keymap] Userspace updates (#14832) --- users/stanrc85/rgblight_layers_osa.c | 4 ++-- users/stanrc85/rules.mk | 1 + 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/users/stanrc85/rgblight_layers_osa.c b/users/stanrc85/rgblight_layers_osa.c index 59366fa34a..aff96c9699 100644 --- a/users/stanrc85/rgblight_layers_osa.c +++ b/users/stanrc85/rgblight_layers_osa.c @@ -11,7 +11,7 @@ const rgblight_segment_t PROGMEM my_capslock_layer[] = RGBLIGHT_LAYER_SEGMENTS( const rgblight_segment_t PROGMEM my_layer1_layer[] = RGBLIGHT_LAYER_SEGMENTS( {2, 2, HSV_GREEN}, {6, 2, HSV_GREEN} -); +); const rgblight_segment_t PROGMEM my_layer2_layer[] = RGBLIGHT_LAYER_SEGMENTS( {2, 2, HSV_BLUE}, @@ -60,7 +60,7 @@ layer_state_t layer_state_set_user(layer_state_t state) { } bool led_update_user(led_t led_state) { - //rgblight_set_layer_state(0, led_state.caps_lock); + rgblight_set_layer_state(0, led_state.caps_lock); writePin(C7, led_state.caps_lock); writePin(C6, middle); writePin(B6, bottom); diff --git a/users/stanrc85/rules.mk b/users/stanrc85/rules.mk index cafda97b1a..d17f2df007 100644 --- a/users/stanrc85/rules.mk +++ b/users/stanrc85/rules.mk @@ -26,6 +26,7 @@ endif ifeq ($(strip $(KEYBOARD)), tkc/osav2) SRC += rgblight_layers_osa.c VELOCIKEY_ENABLE=yes + SRC += rgb_timeout.c endif ifeq ($(strip $(KEYBOARD)), boardsource/the_mark) RGB_MATRIX_ENABLE = yes From b0d293a841977d393c81bef443f7e28f7764ee30 Mon Sep 17 00:00:00 2001 From: floookay <33830863+floookay@users.noreply.github.com> Date: Sat, 16 Oct 2021 04:01:35 +0200 Subject: [PATCH 288/595] [Keyboard] add Pluckey (#14672) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- keyboards/pluckey/config.h | 90 ++++++++++++ keyboards/pluckey/info.json | 149 ++++++++++++++++++++ keyboards/pluckey/keymaps/default/keymap.c | 77 ++++++++++ keyboards/pluckey/keymaps/default/readme.md | 4 + keyboards/pluckey/pluckey.c | 38 +++++ keyboards/pluckey/pluckey.h | 46 ++++++ keyboards/pluckey/readme.md | 19 +++ keyboards/pluckey/rules.mk | 23 +++ 8 files changed, 446 insertions(+) create mode 100644 keyboards/pluckey/config.h create mode 100644 keyboards/pluckey/info.json create mode 100644 keyboards/pluckey/keymaps/default/keymap.c create mode 100644 keyboards/pluckey/keymaps/default/readme.md create mode 100644 keyboards/pluckey/pluckey.c create mode 100644 keyboards/pluckey/pluckey.h create mode 100644 keyboards/pluckey/readme.md create mode 100644 keyboards/pluckey/rules.mk diff --git a/keyboards/pluckey/config.h b/keyboards/pluckey/config.h new file mode 100644 index 0000000000..295fe93a85 --- /dev/null +++ b/keyboards/pluckey/config.h @@ -0,0 +1,90 @@ +/* +Copyright 2021 floookay + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xF100 +#define PRODUCT_ID 0x91CE +#define DEVICE_VER 0x0001 +#define MANUFACTURER floookay +#define PRODUCT pluckey + +/* key matrix size */ +// Rows are doubled-up +#define MATRIX_ROWS 10 +#define MATRIX_COLS 7 + +/* + * Keyboard Matrix Assignments + * + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { B4, F5, F6, B6, B5 } +#define MATRIX_COL_PINS { D1, D0, D4, C6, D7, E6, F7 } +#define UNUSED_PINS { F4, B1 } +#define DIODE_DIRECTION COL2ROW + +/* encoder support */ +#define ENCODERS_PAD_A { B3 } +#define ENCODERS_PAD_B { B2 } +#define ENCODER_RESOLUTION 2 +#define ENCODERS_PAD_A_RIGHT { B2 } +#define ENCODERS_PAD_B_RIGHT { B3 } +#define ENCODER_RESOLUTION_RIGHT 2 + +/* communication between sides */ +#define USE_SERIAL +#define SOFT_SERIAL_PIN D2 + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/pluckey/info.json b/keyboards/pluckey/info.json new file mode 100644 index 0000000000..0a6bd1832d --- /dev/null +++ b/keyboards/pluckey/info.json @@ -0,0 +1,149 @@ +{ + "keyboard_name": "pluckey", + "url": "https://github.com/floookay/pluckey", + "maintainer": "floookay", + "layouts": { + "LAYOUT": { + "layout": [ + {"x":3.5, "y":0}, + {"x":15, "y":0}, + {"x":2.5, "y":0.125}, + {"x":4.5, "y":0.125}, + {"x":14, "y":0.125}, + {"x":16, "y":0.125}, + {"x":5.5, "y":0.25}, + {"x":6.5, "y":0.25}, + {"x":12, "y":0.25}, + {"x":13, "y":0.25}, + {"x":0, "y":0.625, "w":1.5}, + {"x":1.5, "y":0.625}, + {"x":17, "y":0.625}, + {"x":18, "y":0.625, "w":1.5}, + {"x":3.5, "y":1.0}, + {"x":15, "y":1.0}, + {"x":2.5, "y":1.125}, + {"x":4.5, "y":1.125}, + {"x":14, "y":1.125}, + {"x":16, "y":1.125}, + {"x":5.5, "y":1.25}, + {"x":6.5, "y":1.25}, + {"x":12, "y":1.25}, + {"x":13, "y":1.25}, + {"x":0, "y":1.625, "w":1.5}, + {"x":1.5, "y":1.625}, + {"x":17, "y":1.625}, + {"x":18, "y":1.625, "w":1.5}, + {"x":3.5, "y":2}, + {"x":15, "y":2}, + {"x":2.5, "y":2.125}, + {"x":4.5, "y":2.125}, + {"x":14, "y":2.125}, + {"x":16, "y":2.125}, + {"x":5.5, "y":2.25}, + {"x":6.5, "y":2.25}, + {"x":12, "y":2.25}, + {"x":13, "y":2.25}, + {"x":0, "y":2.625, "w":1.5}, + {"x":1.5, "y":2.625}, + {"x":17, "y":2.625}, + {"x":18, "y":2.625, "w":1.5}, + {"x":6.5, "y":3.25}, + {"x":12, "y":3.25}, + {"x":3.5, "y":3}, + {"x":15, "y":3}, + {"x":2.5, "y":3.125}, + {"x":4.5, "y":3.125}, + {"x":14, "y":3.125}, + {"x":16, "y":3.125}, + {"x":5.5, "y":3.25}, + {"x":13, "y":3.25}, + {"x":0, "y":3.625, "w":1.5}, + {"x":1.5, "y":3.625}, + {"x":17, "y":3.625}, + {"x":18, "y":3.625, "w":1.5}, + {"x":7.5, "y":3.75}, + {"x":11, "y":3.75}, + {"x":3.5, "y":4}, + {"x":15, "y":4}, + {"x":2.5, "y":4.125}, + {"x":4.5, "y":4.125}, + {"x":14, "y":4.125}, + {"x":16, "y":4.125}, + {"x":5.75, "y":4.5, "w":1.5}, + {"x":12.25, "y":4.5, "w":1.5}, + {"x":7.25, "y":4.75}, + {"x":11.25, "y":4.75} + ] + }, + "LAYOUT_ergo": { + "layout": [ + {"x":3.5, "y":0}, + {"x":15, "y":0}, + {"x":2.5, "y":0.125}, + {"x":4.5, "y":0.125}, + {"x":14, "y":0.125}, + {"x":16, "y":0.125}, + {"x":5.5, "y":0.25}, + {"x":6.5, "y":0.25}, + {"x":12, "y":0.25}, + {"x":13, "y":0.25}, + {"x":0, "y":0.625, "w":1.5}, + {"x":1.5, "y":0.625}, + {"x":17, "y":0.625}, + {"x":18, "y":0.625, "w":1.5}, + {"x":3.5, "y":1.0}, + {"x":15, "y":1.0}, + {"x":2.5, "y":1.125}, + {"x":4.5, "y":1.125}, + {"x":14, "y":1.125}, + {"x":16, "y":1.125}, + {"x":5.5, "y":1.25}, + {"x":6.5, "y":1.25, "h":1.5}, + {"x":12, "y":1.25, "h":1.5}, + {"x":13, "y":1.25}, + {"x":0, "y":1.625, "w":1.5}, + {"x":1.5, "y":1.625}, + {"x":17, "y":1.625}, + {"x":18, "y":1.625, "w":1.5}, + {"x":3.5, "y":2}, + {"x":15, "y":2}, + {"x":2.5, "y":2.125}, + {"x":4.5, "y":2.125}, + {"x":14, "y":2.125}, + {"x":16, "y":2.125}, + {"x":5.5, "y":2.25}, + {"x":13, "y":2.25}, + {"x":0, "y":2.625, "w":1.5}, + {"x":1.5, "y":2.625}, + {"x":17, "y":2.625}, + {"x":18, "y":2.625, "w":1.5}, + {"x":6.5, "y":2.75, "h":1.5}, + {"x":12, "y":2.75, "h":1.5}, + {"x":3.5, "y":3}, + {"x":15, "y":3}, + {"x":2.5, "y":3.125}, + {"x":4.5, "y":3.125}, + {"x":14, "y":3.125}, + {"x":16, "y":3.125}, + {"x":5.5, "y":3.25}, + {"x":13, "y":3.25}, + {"x":0, "y":3.625, "w":1.5}, + {"x":1.5, "y":3.625}, + {"x":17, "y":3.625}, + {"x":18, "y":3.625, "w":1.5}, + {"x":7.5, "y":3.75}, + {"x":11, "y":3.75}, + {"x":3.5, "y":4}, + {"x":15, "y":4}, + {"x":2.5, "y":4.125}, + {"x":4.5, "y":4.125}, + {"x":14, "y":4.125}, + {"x":16, "y":4.125}, + {"x":5.75, "y":4.5, "w":1.5}, + {"x":12.25, "y":4.5, "w":1.5}, + {"x":7.25, "y":4.75}, + {"x":11.25, "y":4.75} + ] + } + } +} diff --git a/keyboards/pluckey/keymaps/default/keymap.c b/keyboards/pluckey/keymaps/default/keymap.c new file mode 100644 index 0000000000..31042fc692 --- /dev/null +++ b/keyboards/pluckey/keymaps/default/keymap.c @@ -0,0 +1,77 @@ +/* Copyright 2021 floookay + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _LOWER, + _RAISE, + _ADJUST +}; + +// Defines the keycodes used by our macros in process_record_user +enum custom_keycodes { + M_ARROW +}; + +#define MO_LOW MO(_LOWER) +#define MO_RAIS MO(_RAISE) +#define MO_ADJU MO(_ADJUST) +#define MO_CURR _______ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [_BASE] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_MINS, KC_EQL, KC_6, KC_7, KC_8, KC_9, KC_0, KC_GRV, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_LBRC, KC_RBRC, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_LPRN, KC_RPRN, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LCBR, KC_HOME, KC_END, KC_RCBR, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LGUI, KC_LALT, MO_LOW, KC_SPC, KC_BSPC, KC_ENT, KC_SPC, MO_RAIS, KC_RALT, KC_MEH + ), + [_LOWER] = LAYOUT( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F11, KC_F12, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_PSCR, + _______, _______, _______, _______, KC_PIPE, KC_UNDS, KC_LPRN, KC_RPRN, KC_PLUS, KC_PIPE, _______, _______, _______, _______, + _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_LPRN, KC_RPRN, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, + _______, _______, _______, _______, _______, _______, M_ARROW, KC_PGUP, KC_PGDN, _______, _______, _______, _______, _______, _______, _______, + _______, _______, MO_CURR, _______, KC_DEL, _______, _______, MO_ADJU, _______, _______ + ), + [_RAISE] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGUP, _______, _______, _______, + _______, _______, _______, KC_VOLU, _______, _______, KC_LPRN, KC_RPRN, _______, KC_BTN4, KC_UP, KC_BTN5, _______, _______, + _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, KC_LPRN, KC_RPRN, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_END, _______, + _______, _______, _______, KC_VOLD, _______, _______, M_ARROW, KC_PGUP, KC_PGDN, _______, _______, _______, KC_PGDN, _______, _______, _______, + _______, _______, MO_ADJU, _______, KC_DEL, _______, _______, MO_CURR, _______, _______ + ), + [_ADJUST] = LAYOUT( + KC_SLEP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_WH_U, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_WH_L, KC_WH_D, KC_WH_R, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, KC_CLR, _______, _______, _______, _______, _______ + ) +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case M_ARROW: + if (record->event.pressed) { + SEND_STRING("->"); + } + break; + } + return true; +} diff --git a/keyboards/pluckey/keymaps/default/readme.md b/keyboards/pluckey/keymaps/default/readme.md new file mode 100644 index 0000000000..d94d03e588 --- /dev/null +++ b/keyboards/pluckey/keymaps/default/readme.md @@ -0,0 +1,4 @@ +# Default keymap + +![keymap](https://gist.githubusercontent.com/floookay/ea7313862e407c9b5aaea3d6ed3ce233/raw/0a37fe682f76bbaa55cbc56527e4666bedbf5761/layout.png) +[Keyboard-Layout-Editor](http://www.keyboard-layout-editor.com/#/gists/13c9d00bd0c0c9e3fe3b3d8d98672ef9) [(raw)](https://gist.github.com/floookay/13c9d00bd0c0c9e3fe3b3d8d98672ef9) diff --git a/keyboards/pluckey/pluckey.c b/keyboards/pluckey/pluckey.c new file mode 100644 index 0000000000..d9025726fd --- /dev/null +++ b/keyboards/pluckey/pluckey.c @@ -0,0 +1,38 @@ +/* Copyright 2021 floookay + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "pluckey.h" + +#ifdef ENCODER_ENABLE +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + if (index == 0) { + if (clockwise) { + tap_code_delay(KC_VOLU, 10); + } else { + tap_code_delay(KC_VOLD, 10); + } + } + else if (index == 1) { + if (clockwise) { + tap_code(KC_WH_U); + } else { + tap_code(KC_WH_D); + } + } + return true; +} +#endif diff --git a/keyboards/pluckey/pluckey.h b/keyboards/pluckey/pluckey.h new file mode 100644 index 0000000000..628a89baa9 --- /dev/null +++ b/keyboards/pluckey/pluckey.h @@ -0,0 +1,46 @@ +/* Copyright 2021 floookay + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + l00, l01, l02, l03, l04, l05, l06, r00, r01, r02, r03, r04, r05, r06, \ + l10, l11, l12, l13, l14, l15, l16, r10, r11, r12, r13, r14, r15, r16, \ + l20, l21, l22, l23, l24, l25, l26, r20, r21, r22, r23, r24, r25, r26, \ + l30, l31, l32, l33, l34, l35, l36, l41, r45, r30, r31, r32, r33, r34, r35, r36, \ + l42, l43, l44, l45, l46, r40, r41, r42, r43, r44 \ +){ \ + { l00, l01, l02, l03, l04, l05, l06 }, \ + { l10, l11, l12, l13, l14, l15, l16 }, \ + { l20, l21, l22, l23, l24, l25, l26 }, \ + { l30, l31, l32, l33, l34, l35, l36 }, \ + { KC_NO, l41, l42, l43, l44, l45, l46 }, \ + { r06, r05, r04, r03, r02, r01, r00 }, \ + { r16, r15, r14, r13, r12, r11, r10 }, \ + { r26, r25, r24, r23, r22, r21, r20 }, \ + { r36, r35, r34, r33, r32, r31, r30 }, \ + { KC_NO, r45, r44, r43, r42, r41, r40 } \ +} diff --git a/keyboards/pluckey/readme.md b/keyboards/pluckey/readme.md new file mode 100644 index 0000000000..b0a1af99b8 --- /dev/null +++ b/keyboards/pluckey/readme.md @@ -0,0 +1,19 @@ +# Pluckey + +![pluckey](https://gist.githubusercontent.com/floookay/ea7313862e407c9b5aaea3d6ed3ce233/raw/1757078b1adf7ac4d51d74f445107bdb46e013a3/sandwich%2520angle.jpg) + +The pluckey is an ergodox like split keyboard with moderate columnal stagger and a horizontal space key. + +* Keyboard Maintainer: [floookay](https://github.com/floookay) +* Hardware Supported: pluckey pcbs with pro micro controllers +* Hardware Availability: [pcb & case files](https://github.com/floookay/pluckey) + +Make example for this keyboard (after setting up your build environment): + + make pluckey:default + +Flashing example for this keyboard: + + make pluckey:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/pluckey/rules.mk b/keyboards/pluckey/rules.mk new file mode 100644 index 0000000000..4f4954434b --- /dev/null +++ b/keyboards/pluckey/rules.mk @@ -0,0 +1,23 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +ENCODER_ENABLE = yes +SPLIT_KEYBOARD = yes From 40badc4413d97226398302fb7a84c83c5c4f03a8 Mon Sep 17 00:00:00 2001 From: Sergi Meseguer Date: Sat, 16 Oct 2021 04:02:04 +0200 Subject: [PATCH 289/595] [Keymap] zigotica userspace (#14670) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- .../splitkb/kyria/keymaps/zigotica/config.h | 44 ++++ .../splitkb/kyria/keymaps/zigotica/keymap.c | 58 ++++++ .../splitkb/kyria/keymaps/zigotica/oled.c | 87 ++++++++ .../splitkb/kyria/keymaps/zigotica/oled.h | 18 ++ .../splitkb/kyria/keymaps/zigotica/rules.mk | 10 + keyboards/z12/keymaps/zigotica/config.h | 30 +++ keyboards/z12/keymaps/zigotica/encoder.c | 114 ++++++++++ keyboards/z12/keymaps/zigotica/encoder.h | 18 ++ keyboards/z12/keymaps/zigotica/keymap.c | 126 ++++++++++++ keyboards/z12/keymaps/zigotica/oled.c | 43 ++++ keyboards/z12/keymaps/zigotica/oled.h | 18 ++ keyboards/z12/keymaps/zigotica/rules.mk | 4 + keyboards/z12/z12.c | 18 +- keyboards/z34/keymaps/default/rules.mk | 4 +- keyboards/z34/keymaps/zigotica/config.h | 28 +++ keyboards/z34/keymaps/zigotica/keymap.c | 57 +++++ keyboards/z34/keymaps/zigotica/rules.mk | 7 + users/zigotica/combos.c | 40 ++++ users/zigotica/combos.h | 17 ++ users/zigotica/rows.h | 194 ++++++++++++++++++ users/zigotica/rules.mk | 18 ++ users/zigotica/tapdances.c | 34 +++ users/zigotica/tapdances.h | 24 +++ users/zigotica/zigotica.c | 14 ++ users/zigotica/zigotica.h | 51 +++++ 25 files changed, 1057 insertions(+), 19 deletions(-) create mode 100644 keyboards/splitkb/kyria/keymaps/zigotica/config.h create mode 100644 keyboards/splitkb/kyria/keymaps/zigotica/keymap.c create mode 100644 keyboards/splitkb/kyria/keymaps/zigotica/oled.c create mode 100644 keyboards/splitkb/kyria/keymaps/zigotica/oled.h create mode 100644 keyboards/splitkb/kyria/keymaps/zigotica/rules.mk create mode 100644 keyboards/z12/keymaps/zigotica/config.h create mode 100644 keyboards/z12/keymaps/zigotica/encoder.c create mode 100644 keyboards/z12/keymaps/zigotica/encoder.h create mode 100644 keyboards/z12/keymaps/zigotica/keymap.c create mode 100644 keyboards/z12/keymaps/zigotica/oled.c create mode 100644 keyboards/z12/keymaps/zigotica/oled.h create mode 100644 keyboards/z12/keymaps/zigotica/rules.mk create mode 100644 keyboards/z34/keymaps/zigotica/config.h create mode 100644 keyboards/z34/keymaps/zigotica/keymap.c create mode 100644 keyboards/z34/keymaps/zigotica/rules.mk create mode 100644 users/zigotica/combos.c create mode 100644 users/zigotica/combos.h create mode 100644 users/zigotica/rows.h create mode 100644 users/zigotica/rules.mk create mode 100644 users/zigotica/tapdances.c create mode 100644 users/zigotica/tapdances.h create mode 100644 users/zigotica/zigotica.c create mode 100644 users/zigotica/zigotica.h diff --git a/keyboards/splitkb/kyria/keymaps/zigotica/config.h b/keyboards/splitkb/kyria/keymaps/zigotica/config.h new file mode 100644 index 0000000000..b59e04474b --- /dev/null +++ b/keyboards/splitkb/kyria/keymaps/zigotica/config.h @@ -0,0 +1,44 @@ +/* Copyright 2020 Sergi Meseguer + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#define SPLIT_LAYER_STATE_ENABLE +#define SPLIT_LED_STATE_ENABLE +#define MASTER_RIGHT// EE_HANDS MASTER_RIGHT + +// these should work better for homerow modifiers +#define TAPPING_TERM 350 +#define PERMISSIVE_HOLD +#define IGNORE_MOD_TAP_INTERRUPT +#define TAPPING_FORCE_HOLD + +#define LEADER_PER_KEY_TIMING +#define LEADER_TIMEOUT 300 + +#ifdef OLED_ENABLE + #define OLED_DISPLAY_128X64 + #define OLED_TIMEOUT 10000 +#endif + +#ifdef ENCODER_ENABLE + // EC11K encoders have a different resolution than other EC11 encoders. + // When using the default resolution of 4, if you notice your encoder skipping + // every other tick, lower the resolution to 2. + #define ENCODER_RESOLUTION 2 + // Also, flip direction + #define ENCODER_DIRECTION_FLIP +#endif diff --git a/keyboards/splitkb/kyria/keymaps/zigotica/keymap.c b/keyboards/splitkb/kyria/keymaps/zigotica/keymap.c new file mode 100644 index 0000000000..2671f07463 --- /dev/null +++ b/keyboards/splitkb/kyria/keymaps/zigotica/keymap.c @@ -0,0 +1,58 @@ +/* Copyright 2020 Sergi Meseguer + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include "zigotica.h" + +#define LAYOUT_wrapper(...) LAYOUT(__VA_ARGS__) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [BASE] = LAYOUT_wrapper( + _______, _STENAI_L1, _STENAI_R1, _______, + _______, _STENAI_L2, _STENAI_R2, _______, + _______, _STENAI_L3, _______, _______, _______, _______, _STENAI_R3, _______, + _______, _______, _STENAI_LT, _______, _______, _STENAI_RT, _______, _______ + ), + + [_NUM] = LAYOUT_wrapper( + _______, ____NUM_L1, ____NUM_R1, _______, + _______, ____NUM_L2, ____NUM_R2, _______, + _______, ____NUM_L3, _______, _______, _______, _______, ____NUM_R3, _______, + _______, _______, ____NUM_LT, _______, _______, ____NUM_RT, _______, _______ + ), + + [_NAV] = LAYOUT_wrapper( + _______, ____NAV_L1, ____NAV_R1, _______, + _______, ____NAV_L2, ____NAV_R2, _______, + _______, ____NAV_L3, _______, _______, _______, _______, ____NAV_R3, _______, + _______, _______, ____NAV_LT, _______, _______, ____NAV_RT, _______, _______ + ), + + [_SYM] = LAYOUT_wrapper( + _______, ____SYM_L1, ____SYM_R1, _______, + _______, ____SYM_L2, ____SYM_R2, _______, + _______, ____SYM_L3, _______, _______, _______, _______, ____SYM_R3, _______, + _______, _______, ____SYM_LT, _______, _______, ____SYM_RT, _______, _______ + ), + + [_FN] = LAYOUT_wrapper( + _______, ____FN_L1, ____FN_R1, _______, + _______, ____FN_L2, ____FN_R2, _______, + _______, ____FN_L3, _______, _______, _______, _______, ____FN_R3, _______, + _______, _______, ____FN_LT, _______, _______, ____FN_RT, _______, _______ + ), +}; + diff --git a/keyboards/splitkb/kyria/keymaps/zigotica/oled.c b/keyboards/splitkb/kyria/keymaps/zigotica/oled.c new file mode 100644 index 0000000000..46bb2c3cea --- /dev/null +++ b/keyboards/splitkb/kyria/keymaps/zigotica/oled.c @@ -0,0 +1,87 @@ +/* Copyright 2020 Sergi Meseguer + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include "zigotica.h" + +oled_rotation_t oled_init_user(oled_rotation_t rotation) { + return OLED_ROTATION_180; +} + +static void render_kyria_logo(void) { + static const char PROGMEM kyria_logo[] = { + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,128,128,192,224,240,112,120, 56, 60, 28, 30, 14, 14, 14, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 14, 14, 14, 30, 28, 60, 56,120,112,240,224,192,128,128, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0,192,224,240,124, 62, 31, 15, 7, 3, 1,128,192,224,240,120, 56, 60, 28, 30, 14, 14, 7, 7,135,231,127, 31,255,255, 31,127,231,135, 7, 7, 14, 14, 30, 28, 60, 56,120,240,224,192,128, 1, 3, 7, 15, 31, 62,124,240,224,192, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0,240,252,255, 31, 7, 1, 0, 0,192,240,252,254,255,247,243,177,176, 48, 48, 48, 48, 48, 48, 48,120,254,135, 1, 0, 0,255,255, 0, 0, 1,135,254,120, 48, 48, 48, 48, 48, 48, 48,176,177,243,247,255,254,252,240,192, 0, 0, 1, 7, 31,255,252,240, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0,255,255,255, 0, 0, 0, 0, 0,254,255,255, 1, 1, 7, 30,120,225,129,131,131,134,134,140,140,152,152,177,183,254,248,224,255,255,224,248,254,183,177,152,152,140,140,134,134,131,131,129,225,120, 30, 7, 1, 1,255,255,254, 0, 0, 0, 0, 0,255,255,255, 0, 0, 0, 0,255,255, 0, 0,192,192, 48, 48, 0, 0,240,240, 0, 0, 0, 0, 0, 0,240,240, 0, 0,240,240,192,192, 48, 48, 48, 48,192,192, 0, 0, 48, 48,243,243, 0, 0, 0, 0, 0, 0, 48, 48, 48, 48, 48, 48,192,192, 0, 0, 0, 0, 0, + 0, 0, 0,255,255,255, 0, 0, 0, 0, 0,127,255,255,128,128,224,120, 30,135,129,193,193, 97, 97, 49, 49, 25, 25,141,237,127, 31, 7,255,255, 7, 31,127,237,141, 25, 25, 49, 49, 97, 97,193,193,129,135, 30,120,224,128,128,255,255,127, 0, 0, 0, 0, 0,255,255,255, 0, 0, 0, 0, 63, 63, 3, 3, 12, 12, 48, 48, 0, 0, 0, 0, 51, 51, 51, 51, 51, 51, 15, 15, 0, 0, 63, 63, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 48, 48, 63, 63, 48, 48, 0, 0, 12, 12, 51, 51, 51, 51, 51, 51, 63, 63, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 15, 63,255,248,224,128, 0, 0, 3, 15, 63,127,255,239,207,141, 13, 12, 12, 12, 12, 12, 12, 12, 30,127,225,128, 0, 0,255,255, 0, 0,128,225,127, 30, 12, 12, 12, 12, 12, 12, 12, 13,141,207,239,255,127, 63, 15, 3, 0, 0,128,224,248,255, 63, 15, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 3, 7, 15, 62,124,248,240,224,192,128, 1, 3, 7, 15, 30, 28, 60, 56,120,112,112,224,224,225,231,254,248,255,255,248,254,231,225,224,224,112,112,120, 56, 60, 28, 30, 15, 7, 3, 1,128,192,224,240,248,124, 62, 15, 7, 3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 3, 7, 15, 14, 30, 28, 60, 56,120,112,112,112,224,224,224,224,224,224,224,224,224,224,224,224,224,224,224,224,112,112,112,120, 56, 60, 28, 30, 14, 15, 7, 3, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 + }; + oled_write_raw_P(kyria_logo, sizeof(kyria_logo)); +} + +static void render_qmk_logo(void) { + static const char PROGMEM qmk_logo[] = { + 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, + 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, + 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,0}; + + oled_write_P(qmk_logo, false); +} + +static void render_status(void) { + // QMK Logo and version information + render_qmk_logo(); + oled_write_P(PSTR("Kyria v1.2\n\n"), false); + + // Host Keyboard Layer Status + oled_write_P(PSTR("Layer: "), false); + switch (get_highest_layer(layer_state)) { + case BASE: + oled_write_P(PSTR("STENAI\n"), false); + break; + case _NUM: + oled_write_P(PSTR("NUM\n"), false); + break; + case _NAV: + oled_write_P(PSTR("NAV\n"), false); + break; + case _SYM: + oled_write_P(PSTR("SYM\n"), false); + break; + case _FN: + oled_write_P(PSTR("FN\n"), false); + break; + default: + oled_write_P(PSTR("Undef\n"), false); + } + + // Host Keyboard LED Status + led_t led_state = host_keyboard_led_state(); + oled_write_P(led_state.num_lock ? PSTR("NUMLCK ") : PSTR(" "), false); + oled_write_P(led_state.caps_lock ? PSTR("CAPLCK ") : PSTR(" "), false); + oled_write_P(led_state.scroll_lock ? PSTR("SCRLCK ") : PSTR(" "), false); +} + +void oled_task_user(void) { + if (!is_keyboard_left()) { + render_status(); // Renders the current keyboard state (layer, lock, caps, scroll, etc) + } else { + render_kyria_logo(); + } +} + diff --git a/keyboards/splitkb/kyria/keymaps/zigotica/oled.h b/keyboards/splitkb/kyria/keymaps/zigotica/oled.h new file mode 100644 index 0000000000..2422c68f28 --- /dev/null +++ b/keyboards/splitkb/kyria/keymaps/zigotica/oled.h @@ -0,0 +1,18 @@ +/* Copyright 2020 Sergi Meseguer + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once +#include "zigotica.h" diff --git a/keyboards/splitkb/kyria/keymaps/zigotica/rules.mk b/keyboards/splitkb/kyria/keymaps/zigotica/rules.mk new file mode 100644 index 0000000000..29d98d7019 --- /dev/null +++ b/keyboards/splitkb/kyria/keymaps/zigotica/rules.mk @@ -0,0 +1,10 @@ +OLED_ENABLE = yes +ENCODER_ENABLE = no +RGBLIGHT_ENABLE = no + +COMBO_ENABLE = yes +TAP_DANCE_ENABLE = yes +LEADER_ENABLE = no +UNICODE_ENABLE = no +MOUSEKEY_ENABLE = yes + diff --git a/keyboards/z12/keymaps/zigotica/config.h b/keyboards/z12/keymaps/zigotica/config.h new file mode 100644 index 0000000000..fbab76d5f0 --- /dev/null +++ b/keyboards/z12/keymaps/zigotica/config.h @@ -0,0 +1,30 @@ +/* Copyright 2020 Sergi Meseguer + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +#ifdef OLED_ENABLE + #define OLED_DISPLAY_128X32 +#endif + +// EC11 encoders' resolution. +// Reduce the value to 2 if you feel missing values: +#define ENCODER_RESOLUTION 4 + +// Allows correct registered values by rotary encoder: +#define TAP_CODE_DELAY 10 diff --git a/keyboards/z12/keymaps/zigotica/encoder.c b/keyboards/z12/keymaps/zigotica/encoder.c new file mode 100644 index 0000000000..49a3d859b6 --- /dev/null +++ b/keyboards/z12/keymaps/zigotica/encoder.c @@ -0,0 +1,114 @@ +/* Copyright 2020 Sergi Meseguer + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include "zigotica.h" + +bool encoder_update_user(uint8_t index, bool clockwise) { + switch(get_highest_layer(layer_state)){ + case _VIM: + if (index == 0) { // LEFT + // Cycle through buffers + if (clockwise) { + register_code(KC_ESC); + SEND_STRING(":bprevious"); + register_code(KC_ENT); + unregister_code(KC_ESC); + unregister_code(KC_ENT); + } else { + register_code(KC_ESC); + SEND_STRING(":bnext"); + register_code(KC_ENT); + unregister_code(KC_ESC); + unregister_code(KC_ENT); + } + } else { // RIGHT + // Scroll + if (clockwise) { + tap_code(KC_PGDN); + } else { + tap_code(KC_PGUP); + } + } + break; + case _BROWSER: + if (index == 0) { // LEFT + // Cycle through Tabs + if (clockwise) { + tap_code16(C(KC_TAB)); + /* register_code16(G(KC_RCBR)); */ + /* unregister_code16(G(KC_RCBR)); */ + } else { + tap_code16(S(C(KC_TAB))); + /* register_code16(G(KC_LCBR)); */ + /* unregister_code16(G(KC_LCBR)); */ + } + } else { // RIGHT + // Scroll up/down + if (clockwise) { + register_code(KC_WH_U); + unregister_code(KC_WH_U); + } else { + register_code(KC_WH_D); + unregister_code(KC_WH_D); + } + } + break; + case _FIGMA: + if (index == 0) { // LEFT + // Volume control. + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } else { // RIGHT + // Zoom in/out + if (clockwise) { + register_code(KC_LGUI); + register_code(KC_WH_D); + unregister_code(KC_WH_D); + unregister_code(KC_LGUI); + } else { + register_code(KC_LGUI); + register_code(KC_WH_U); + unregister_code(KC_WH_U); + unregister_code(KC_LGUI); + } + } + break; + case _TERMINAL: + default: + if (index == 0) { // LEFT + // Volume control. + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } else { // RIGHT + // Scroll + if (clockwise) { + tap_code(KC_PGDN); + } else { + tap_code(KC_PGUP); + } + } + break; + } + return false; +} + + diff --git a/keyboards/z12/keymaps/zigotica/encoder.h b/keyboards/z12/keymaps/zigotica/encoder.h new file mode 100644 index 0000000000..2422c68f28 --- /dev/null +++ b/keyboards/z12/keymaps/zigotica/encoder.h @@ -0,0 +1,18 @@ +/* Copyright 2020 Sergi Meseguer + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once +#include "zigotica.h" diff --git a/keyboards/z12/keymaps/zigotica/keymap.c b/keyboards/z12/keymaps/zigotica/keymap.c new file mode 100644 index 0000000000..7e969de96e --- /dev/null +++ b/keyboards/z12/keymaps/zigotica/keymap.c @@ -0,0 +1,126 @@ +/* Copyright 2020 + Sergi Meseguer + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include "zigotica.h" + +// Custom Keycodes +#define MODE_1 TO(_TERMINAL) +#define MODE_2 TO(_FIGMA) +#define MODE_3 TO(_BROWSER) +#define MODE_4 TO(_VIM) + +enum custom_keycodes { + VIM_SIP = SAFE_RANGE +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case VIM_SIP: + if (record->event.pressed) { + register_code(KC_ESC); + SEND_STRING(":Ag "); + } else { + // released + unregister_code(KC_ESC); + } + break; + } + return true; +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* + * TERMINAL Layer + * + * ,-----------------------------. + * | | TERM | FIGM | | + * |-------+------+------+-------| + * | VOL | BROW | VIM | SCROLL| + * |-------+------+------+-------| + * |-------+-------+-------| + * | MEDIA | o | o | + * |-------+-------+-------| + * | o | o | o | + * |-------+-------+-------| + */ + [_TERMINAL] = LAYOUT( + MODE_1, MODE_2, + ZK_MEDIA, MODE_3, MODE_4, _______, + _______, _______, _______, + _______, _______, _______ + ), +/* + * VIM Layer + * + * ,-----------------------------. + * | | TERM | FIGM | | + * |-------+------+------+-------| + * |BUFFER | BROW | VIM | SCROLL| + * |-------+------+------+-------| + * |-------+-------+-------| + * |SEARCH | o | o | + * |-------+-------+-------| + * | o | o | o | + * |-------+-------+-------| + */ + [_VIM] = LAYOUT( + _______, _______, + _______, _______, _______, _______, + VIM_SIP, _______, _______, + _______, _______, _______ + ), +/* + * FIGMA Layer + * + * ,-----------------------------. + * | | TERM | FIGM | | + * |-------+------+------+-------| + * | VOL | BROW | VIM | ZOOM | + * |-------+------+------+-------| + * |-------+-------+-------| + * | ZOOM | GRIDS | FULL | + * |-------+-------+-------| + * | o | o | o | + * |-------+-------+-------| + */ + [_FIGMA] = LAYOUT( + _______, _______, + _______, _______, _______, _______, + LSFT(KC_1), LCTL(KC_G), LGUI(KC_BSLS), + _______, _______, _______ + ), +/* + * BROWSER Layer + * + * ,-----------------------------. + * | | TERM | FIGM | | + * |-------+------+------+-------| + * | TABS | BROW | VIM | SCROLL| + * |-------+------+------+-------| + * |-------+-------+-------| + * |SEARCH | BOOKM | DEVTL | + * |-------+-------+-------| + * | o | o | o | + * |-------+-------+-------| + */ + [_BROWSER] = LAYOUT( + _______, _______, + _______, _______, _______, _______, + G(KC_F), G(KC_D), G(A(KC_I)), + _______, _______, _______ + ), +}; diff --git a/keyboards/z12/keymaps/zigotica/oled.c b/keyboards/z12/keymaps/zigotica/oled.c new file mode 100644 index 0000000000..4b428a42b1 --- /dev/null +++ b/keyboards/z12/keymaps/zigotica/oled.c @@ -0,0 +1,43 @@ +/* Copyright 2020 Sergi Meseguer + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include "zigotica.h" + +static void render_status(void) { + oled_write_P(PSTR("z12 v1.0\n"), false); + oled_write_P(PSTR("Layer: "), false); + switch (get_highest_layer(layer_state)) { + case _VIM: + oled_write_P(PSTR("VIM\n\nBUFFER SCROLL"), false); + break; + case _FIGMA: + oled_write_P(PSTR("FIGMA\n\nVOLUME ZOOM"), false); + break; + case _BROWSER: + oled_write_P(PSTR("BROWSER\n\nTABS SCROLL"), false); + break; + case _TERMINAL: + oled_write_P(PSTR("TERMINAL\n\nVOLUME SCROLL"), false); + break; + default: + oled_write_P(PSTR("Undef\n"), false); + } +} + +void oled_task_user(void) { + render_status(); +} + diff --git a/keyboards/z12/keymaps/zigotica/oled.h b/keyboards/z12/keymaps/zigotica/oled.h new file mode 100644 index 0000000000..2422c68f28 --- /dev/null +++ b/keyboards/z12/keymaps/zigotica/oled.h @@ -0,0 +1,18 @@ +/* Copyright 2020 Sergi Meseguer + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once +#include "zigotica.h" diff --git a/keyboards/z12/keymaps/zigotica/rules.mk b/keyboards/z12/keymaps/zigotica/rules.mk new file mode 100644 index 0000000000..02e37aa80b --- /dev/null +++ b/keyboards/z12/keymaps/zigotica/rules.mk @@ -0,0 +1,4 @@ +OLED_ENABLE = yes # Enables the use of OLED displays +RAW_ENABLE = yes +TAP_DANCE_ENABLE = yes +MOUSEKEY_ENABLE = yes diff --git a/keyboards/z12/z12.c b/keyboards/z12/z12.c index 99fe62ab93..2af8836cab 100644 --- a/keyboards/z12/z12.c +++ b/keyboards/z12/z12.c @@ -18,22 +18,6 @@ #ifdef ENCODER_ENABLE bool encoder_update_kb(uint8_t index, bool clockwise) { - if (!encoder_update_user(index, clockwise)) { return false; } - if (index == 0) { // LEFT - // Scroll - if (clockwise) { - tap_code_delay(KC_PGDN, 10); - } else { - tap_code_delay(KC_PGUP, 10); - } - } else { // RIGHT - // Volume control. - if (clockwise) { - tap_code_delay(KC_VOLU, 10); - } else { - tap_code_delay(KC_VOLD, 10); - } - } - return false; + return encoder_update_user(index, clockwise); } #endif diff --git a/keyboards/z34/keymaps/default/rules.mk b/keyboards/z34/keymaps/default/rules.mk index 9281e9843b..827811a362 100644 --- a/keyboards/z34/keymaps/default/rules.mk +++ b/keyboards/z34/keymaps/default/rules.mk @@ -1,3 +1,3 @@ # There are no extra pins, so we make sure to disable OLED and Encoders -OLED_ENABLE = no # Enables the use of OLED displays -ENCODER_ENABLE = no # Enables the use of encoders +OLED_SUPPORTED = no +ENCODER_SUPPORTED = no diff --git a/keyboards/z34/keymaps/zigotica/config.h b/keyboards/z34/keymaps/zigotica/config.h new file mode 100644 index 0000000000..1b223cb71d --- /dev/null +++ b/keyboards/z34/keymaps/zigotica/config.h @@ -0,0 +1,28 @@ +/* Copyright 2020 Sergi Meseguer + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +#define MASTER_RIGHT + +// these should work better for homerow modifiers +#define TAPPING_TERM 350 +#define PERMISSIVE_HOLD +#define IGNORE_MOD_TAP_INTERRUPT +#define TAPPING_FORCE_HOLD + diff --git a/keyboards/z34/keymaps/zigotica/keymap.c b/keyboards/z34/keymaps/zigotica/keymap.c new file mode 100644 index 0000000000..88c6a3db1b --- /dev/null +++ b/keyboards/z34/keymaps/zigotica/keymap.c @@ -0,0 +1,57 @@ +/* Copyright 2020 Sergi Meseguer + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include "zigotica.h" + +#define LAYOUT_wrapper(...) LAYOUT(__VA_ARGS__) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [BASE] = LAYOUT_wrapper( + _STENAI_L1, _STENAI_R1, + _STENAI_L2, _STENAI_R2, + _STENAI_L3, _STENAI_R3, + _STENAI_LT, _STENAI_RT + ), + + [_NUM] = LAYOUT_wrapper( + ____NUM_L1, ____NUM_R1, + ____NUM_L2, ____NUM_R2, + ____NUM_L3, ____NUM_R3, + ____NUM_LT, ____NUM_RT + ), + + [_NAV] = LAYOUT_wrapper( + ____NAV_L1, ____NAV_R1, + ____NAV_L2, ____NAV_R2, + ____NAV_L3, ____NAV_R3, + ____NAV_LT, ____NAV_RT + ), + + [_SYM] = LAYOUT_wrapper( + ____SYM_L1, ____SYM_R1, + ____SYM_L2, ____SYM_R2, + ____SYM_L3, ____SYM_R3, + ____SYM_LT, ____SYM_RT + ), + + [_FN] = LAYOUT_wrapper( + ____FN_L1, ____FN_R1, + ____FN_L2, ____FN_R2, + ____FN_L3, ____FN_R3, + ____FN_LT, ____FN_RT + ), +}; + diff --git a/keyboards/z34/keymaps/zigotica/rules.mk b/keyboards/z34/keymaps/zigotica/rules.mk new file mode 100644 index 0000000000..9abdfb40b4 --- /dev/null +++ b/keyboards/z34/keymaps/zigotica/rules.mk @@ -0,0 +1,7 @@ +# There are no extra pins, so we make sure to disable OLED and Encoders +OLED_SUPPORTED = no +ENCODER_SUPPORTED = no + +MOUSEKEY_ENABLE = yes +COMBO_ENABLE = yes +TAP_DANCE_ENABLE = yes diff --git a/users/zigotica/combos.c b/users/zigotica/combos.c new file mode 100644 index 0000000000..8fb5b3c9fc --- /dev/null +++ b/users/zigotica/combos.c @@ -0,0 +1,40 @@ +/* Copyright 2020 Sergi Meseguer +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include "combos.h" + +enum combos { + EM_EMAIL, + CL_CAPSL, + COMBO_LENGTH +}; +uint16_t COMBO_LEN = COMBO_LENGTH; + +const uint16_t PROGMEM email_combo[] = {LT(_SYM, KC_E), KC_M, COMBO_END}; +const uint16_t PROGMEM caps_combo[] = {KC_C, KC_L, COMBO_END}; + +combo_t key_combos[] = { + [EM_EMAIL] = COMBO_ACTION(email_combo), + [CL_CAPSL] = COMBO(caps_combo, KC_CAPSLOCK), +}; + +void process_combo_event(uint16_t combo_index, bool pressed) { + switch(combo_index) { + case EM_EMAIL: + if (pressed) { + SEND_STRING("zigotica@gmail.com"); + } + break; + } +} + diff --git a/users/zigotica/combos.h b/users/zigotica/combos.h new file mode 100644 index 0000000000..c75a107b9a --- /dev/null +++ b/users/zigotica/combos.h @@ -0,0 +1,17 @@ +/* Copyright 2020 Sergi Meseguer +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + + +#pragma once +#include "zigotica.h" + diff --git a/users/zigotica/rows.h b/users/zigotica/rows.h new file mode 100644 index 0000000000..e73d72bbe2 --- /dev/null +++ b/users/zigotica/rows.h @@ -0,0 +1,194 @@ +/* Copyright 2020 Sergi Meseguer +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once +#include "zigotica.h" + +// clang-format off +#define _BLANK_ROW _______, _______, _______, _______, _______ +#define _BLANK_THUMB _______, _______ + +/* + * STENAI Layer + * + * ,---------------------------------------. ,---------------------------------------. + * | | | | | | | | | | | | + * | ` ~ | W | D | P | F | | K | Y | U | Q | ' " | + * | | | | | | | | | | | | + * |-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------| + * | | | | | | | | | | | | + * | H | R | S | T | G | | M | N | A | I | O | + * | alt | ctrl | shft | meta | | | | meta | shft | ctrl | alt | + * |-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------| + * | | | | | | | | | | | | + * | B | X | C | V | [ { | | , < | L | Z | J | . > | + * | | | | | TD ]} | | TD ; | | | | TD : | + * `-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------. + * | | | | | | + * | ESC | SPC | | E | INTRO | + * | num | nav | | sym | fn | + * `---------------' `---------------' + * + */ +#define _STENAI_L1 KC_GRV, KC_W, KC_D, KC_P, KC_F +#define _STENAI_L2 LALT_T(KC_H), LCTL_T(KC_R), LSFT_T(KC_S), LGUI_T(KC_T), KC_G +#define _STENAI_L3 KC_B, KC_X, KC_C, KC_V, ZK_BRC +#define _STENAI_LT LT(_NUM, KC_ESC), LT(_NAV, KC_SPC) + +#define _STENAI_R1 KC_K, KC_Y, KC_U, KC_Q, KC_QUOT +#define _STENAI_R2 KC_M, RGUI_T(KC_N), RSFT_T(KC_A), RCTL_T(KC_I), RALT_T(KC_O) +#define _STENAI_R3 ZK_SEMI, KC_L, KC_Z, KC_J, ZK_COLON +#define _STENAI_RT LT(_SYM, KC_E), LT(_FN, KC_ENT) + + +#define _COLEMAK_L1 KC_Q, KC_W, KC_F, KC_P, KC_G +#define _COLEMAK_L2 KC_A, KC_R, KC_S, KC_T, KC_D +#define _COLEMAK_L3 KC_Z, KC_X, KC_C, KC_V, KC_B + +#define _COLEMAK_R1 KC_J, KC_L, KC_U, KC_Y, KC_SCLN +#define _COLEMAK_R2 KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT +#define _COLEMAK_R3 KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH + +#define _QWERTY_L1 KC_Q, KC_W, KC_E, KC_R, KC_T +#define _QWERTY_L2 KC_A, KC_S, KC_D, KC_F, KC_G +#define _QWERTY_L3 KC_Z, KC_X, KC_C, KC_V, KC_B + +#define _QWERTY_R1 KC_Y, KC_U, KC_I, KC_O, KC_P +#define _QWERTY_R2 KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT +#define _QWERTY_R3 KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH + +/* + * NUM Layer + * + * ,---------------------------------------. ,---------------------------------------. + * | | | | | | | | | | | | + * | | - | + | = | | | | 7 | 8 | 9 | | + * | | | | | | | | | | | | + * |-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------| + * | | | | | | | | | | | | + * | | | | | | | | 1 | 2 | 3 | | + * | | | | | | | | | | | | + * |-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------| + * | | | | | | | | | | | | + * | | | / | * | | | | 4 | 5 | 6 | | + * | | | | | | | | | | | | + * `-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------. + * |:::::::| | | | | + * |:::::::| | | 0 | BACK | + * |:::::::| | | | | + * `---------------' `---------------' + * + */ +#define ____NUM_L1 _______, KC_MINS, KC_PLUS, KC_EQL, _______ +#define ____NUM_L2 _BLANK_ROW +#define ____NUM_L3 _______, _______, KC_SLSH, KC_ASTR, _______ +#define ____NUM_LT _BLANK_THUMB + +#define ____NUM_R1 _______, KC_7, KC_8, KC_9, _______ +#define ____NUM_R2 _______, KC_1, KC_2, KC_3, _______ +#define ____NUM_R3 _______, KC_4, KC_5, KC_6, _______ +#define ____NUM_RT KC_0, KC_BSPC + +/* +* NAVIGATION Layer +* +* ,---------------------------------------. ,---------------------------------------. +* | | | | | | | | | | | | +* | | PREV | PLAY | NEXT | | | WHDN | HOME | UP | PGUP | | +* | | | | | | | | | | | | +* |-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------| +* | | | | | | | | | | | | +* | | | | | | | WHUP | LF | DN | RG | | +* | | | | | | | | | | | | +* |-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------| +* | | | | | | | | | | | | +* | | | | | | | | END | | PGDN | | +* | | | | | | | | | | | | +* `-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------. +* | |:::::::| | | | +* | |:::::::| | | DEL | +* | |:::::::| | | | +* `---------------' `---------------' +*/ +#define ____NAV_L1 _______, KC_MPRV, KC_MPLY, KC_MNXT, _______ +#define ____NAV_L2 _BLANK_ROW +#define ____NAV_L3 _BLANK_ROW +#define ____NAV_LT _BLANK_THUMB + +#define ____NAV_R1 KC_WH_D, KC_HOME, KC_UP, KC_PGUP, _______ +#define ____NAV_R2 KC_WH_U, KC_LEFT, KC_DOWN, KC_RGHT, _______ +#define ____NAV_R3 _______, KC_END, _______, KC_PGDN, _______ +#define ____NAV_RT _______, KC_DEL + +/* +* SYMBOLS Layer +* +* ,---------------------------------------. ,---------------------------------------. +* | | | | | | | | | | | | +* | % | & | ? | | | ! | | | | | | | +* | | | | | | | | | | | | +* |-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------| +* | | | | | | | | | | | | +* | # | @ | : | ; | $ | | | | | | | +* | | | | | | | | | | | | +* |-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------| +* | | | | | | | | | | | | +* | ( | ~ | / | \ | ^ | | | | | | | +* | | | | | | | | | | | | +* `-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------. +* | | | |:::::::| | +* | | TAB | |:::::::| | +* | | | |:::::::| | +* `---------------' `---------------' +*/ +#define ____SYM_L1 KC_PERC, KC_AMPR, KC_QUES, KC_PIPE, KC_EXLM +#define ____SYM_L2 KC_HASH, KC_AT, KC_COLN, KC_SCLN, KC_DLR +#define ____SYM_L3 ZK_PRN, KC_TILD, KC_SLSH, KC_BSLS, KC_CIRC +#define ____SYM_LT _______, KC_TAB + +#define ____SYM_R1 _BLANK_ROW +#define ____SYM_R2 _BLANK_ROW +#define ____SYM_R3 _BLANK_ROW +#define ____SYM_RT _BLANK_THUMB + +/* +* FUNCTION KEYS Layer +* +* ,---------------------------------------. ,---------------------------------------. +* | | | | | | | | | | | | +* | | | | | | | | F7 | F8 | F9 | F10 | +* | | | | | | | | | | | | +* |-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------| +* | | | | | | | | | | | | +* | | | | | | | | F1 | F2 | F3 | F11 | +* | | | | | | | | | | | | +* |-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------| +* | | | | | | | | | | | | +* | | | | | | | | F4 | F5 | F6 | F12 | +* | | | | | | | | | | | | +* `-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------. +* | | | | |:::::::| +* | | TAB | | |:::::::| +* | | | | |:::::::| +* `---------------' `---------------' +*/ +#define ____FN_L1 _BLANK_ROW +#define ____FN_L2 _BLANK_ROW +#define ____FN_L3 _BLANK_ROW +#define ____FN_LT _______, KC_TAB + +#define ____FN_R1 _______, KC_F7, KC_F8, KC_F9, KC_F10 +#define ____FN_R2 _______, KC_F1, KC_F2, KC_F3, KC_F11 +#define ____FN_R3 _______, KC_F4, KC_F5, KC_F6, KC_F12 +#define ____FN_RT _BLANK_THUMB +// clang-format on diff --git a/users/zigotica/rules.mk b/users/zigotica/rules.mk new file mode 100644 index 0000000000..019e6f6dda --- /dev/null +++ b/users/zigotica/rules.mk @@ -0,0 +1,18 @@ +SRC += zigotica.c + +ifeq ($(strip $(TAP_DANCE_ENABLE)), yes) + SRC += tapdances.c +endif + +ifeq ($(strip $(COMBO_ENABLE)), yes) + SRC += combos.c +endif + +ifeq ($(strip $(OLED_ENABLE)), yes) + SRC += oled.c +endif + +ifeq ($(strip $(ENCODER_ENABLE)), yes) + SRC += encoder.c +endif + diff --git a/users/zigotica/tapdances.c b/users/zigotica/tapdances.c new file mode 100644 index 0000000000..74bb1b605e --- /dev/null +++ b/users/zigotica/tapdances.c @@ -0,0 +1,34 @@ +/* Copyright 2020 Sergi Meseguer +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include "tapdances.h" + +void ios_media(qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 1) { + tap_code(KC_MPLY); + } else if (state->count == 2) { + tap_code(KC_MNXT); + } else if (state->count == 3) { + tap_code(KC_MPRV); + } else { + reset_tap_dance(state); + } +} + +qk_tap_dance_action_t tap_dance_actions[] = { + [0] = ACTION_TAP_DANCE_FN(ios_media), + [1] = ACTION_TAP_DANCE_DOUBLE(KC_COMM, KC_SCOLON), + [2] = ACTION_TAP_DANCE_DOUBLE(KC_DOT, KC_COLON), + [3] = ACTION_TAP_DANCE_DOUBLE(KC_LBRC, KC_RBRC), + [4] = ACTION_TAP_DANCE_DOUBLE(KC_LPRN, KC_RPRN), +}; diff --git a/users/zigotica/tapdances.h b/users/zigotica/tapdances.h new file mode 100644 index 0000000000..051c8a90bc --- /dev/null +++ b/users/zigotica/tapdances.h @@ -0,0 +1,24 @@ +/* Copyright 2020 Sergi Meseguer +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + + +#pragma once +#include "zigotica.h" + +#ifdef TAP_DANCE_ENABLE + #define ZK_MEDIA TD(0) + #define ZK_SEMI TD(1) + #define ZK_COLON TD(2) + #define ZK_BRC TD(3) + #define ZK_PRN TD(4) +#endif diff --git a/users/zigotica/zigotica.c b/users/zigotica/zigotica.c new file mode 100644 index 0000000000..9de57406c4 --- /dev/null +++ b/users/zigotica/zigotica.c @@ -0,0 +1,14 @@ +/* Copyright 2020 Sergi Meseguer +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include "zigotica.h" diff --git a/users/zigotica/zigotica.h b/users/zigotica/zigotica.h new file mode 100644 index 0000000000..e9ff5ff16c --- /dev/null +++ b/users/zigotica/zigotica.h @@ -0,0 +1,51 @@ +/* Copyright 2020 Sergi Meseguer +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once +#include QMK_KEYBOARD_H + +#include "rows.h" + +#ifdef SPLIT_KEYBOARD +enum userspace_layers { + BASE = 0, + _NUM, + _NAV, + _SYM, + _FN, +}; +#else +enum userspace_layers { + _TERMINAL = 0, + _FIGMA, + _BROWSER, + _VIM, +}; +#endif + + +#ifdef TAP_DANCE_ENABLE +# include "tapdances.h" +#endif + +#ifdef COMBO_ENABLE +# include "combos.h" +#endif + +#ifdef OLED_ENABLE + #include "oled.h" +#endif + +#ifdef ENCODER_ENABLE + #include "encoder.h" +#endif From 4db5d85273c455f9520de28417b8105d902da402 Mon Sep 17 00:00:00 2001 From: BenSchaeff <56860818+BenSchaeff@users.noreply.github.com> Date: Fri, 15 Oct 2021 21:02:19 -0500 Subject: [PATCH 290/595] [Keymap] Added GMMK Pro keymap with RGB (#14648) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- .../gmmk/pro/ansi/keymaps/benschaeff/keymap.c | 127 ++++++++++++++++++ .../pro/ansi/keymaps/benschaeff/readme.md | 19 +++ 2 files changed, 146 insertions(+) create mode 100644 keyboards/gmmk/pro/ansi/keymaps/benschaeff/keymap.c create mode 100644 keyboards/gmmk/pro/ansi/keymaps/benschaeff/readme.md diff --git a/keyboards/gmmk/pro/ansi/keymaps/benschaeff/keymap.c b/keyboards/gmmk/pro/ansi/keymaps/benschaeff/keymap.c new file mode 100644 index 0000000000..834727827c --- /dev/null +++ b/keyboards/gmmk/pro/ansi/keymaps/benschaeff/keymap.c @@ -0,0 +1,127 @@ +/* Copyright 2021 Glorious, LLC +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + +enum userspace_layers { + QWERTY, + FNLAYER, + POPTAB, +}; + +//custom keycodes +#define MODS_ALT_MASK (MOD_BIT(KC_LALT)) // Make ALT layer for encoder use +#define MODS_CTRL_MASK (MOD_BIT(KC_LCTL)) // Make CTRL layer for encoder use +#define SWAP_L SGUI(KC_LEFT) // Swap application to left display +#define SWAP_R SGUI(KC_RGHT) // Swap application to right display +#define MINI LGUI(KC_DOWN) // Shrink window +#define MAXI LGUI(KC_UP) // Maximize window +#define CLOSEAPPLICATION LALT(KC_F4) // Kill application +#define CLOSETAB LCTL(KC_W) // Kill current tab +#define POPOUT LCTL(LSFT(KC_K)) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +// ESC F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 Prt Rotary(Mute) +// ~ 1 2 3 4 5 6 7 8 9 0 - (=) BackSpc Del +// Tab Q W E R T Y U I O P [ ] \ PgUp +// Caps A S D F G H J K L ; " Enter PgDn +// Sh_L Z X C V B N M , . ? Sh_R Up End +// Ct_L Win_L Alt_L SPACE Alt_R FN Ct_R Left Down Right + + + // The FN key by default maps to a momentary toggle to layer 1 to provide access to the RESET key (to put the board into bootloader mode). Without + // this mapping, you have to open the case to hit the button on the bottom of the PCB (near the USB cable attachment) while plugging in the USB + // cable to get the board into bootloader mode - definitely not fun when you're working on your QMK builds. Remove this and put it back to KC_RGUI + // if that's your preference. + // + // To put the keyboard in bootloader mode, use FN+backslash. If you accidentally put it into bootloader, you can just unplug the USB cable and + // it'll be back to normal when you plug it back in. + + [QWERTY] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_MUTE, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(FNLAYER), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [FNLAYER] = LAYOUT( + CLOSEAPPLICATION, CLOSETAB,_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MEDIA_PLAY_PAUSE, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, SWAP_L , MAXI , SWAP_R , _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET , _______, + _______, _______, MINI , _______, POPOUT, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, KC_TRNS, _______, _______, _______ + ), + + +}; + + +bool encoder_update_user(uint8_t index, bool clockwise) { + if (get_mods() & MODS_ALT_MASK) { + if (clockwise) { + tap_code(KC_TAB); + } else { + tap_code16(S(KC_TAB)); + } + } else if (get_mods() & MODS_CTRL_MASK) { + if (clockwise) { + tap_code(KC_TAB); + } else { + tap_code16(S(KC_TAB)); + } + } else if(IS_LAYER_ON(FNLAYER)) { + if (clockwise) { + tap_code(KC_MEDIA_NEXT_TRACK); + } else { + tap_code(KC_MEDIA_PREV_TRACK); + } + } else { + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } + return false; +} + +void rgb_matrix_indicators_advanced_user(uint8_t led_min, uint8_t led_max) { + switch(get_highest_layer(layer_state)) { + // special handling per layer + case 0: //layer one + if (host_keyboard_led_state().caps_lock) + rgb_matrix_set_color_all(255,0,0); + else + rgb_matrix_set_color_all(0,255,56); + break; + case 1: + for (uint8_t i = led_min; i < led_max; i++) { + RGB_MATRIX_INDICATOR_SET_COLOR(i,0,0,0); + } + RGB_MATRIX_INDICATOR_SET_COLOR(0, 0, 0, 255) //esc + RGB_MATRIX_INDICATOR_SET_COLOR(6, 0, 0, 255) //f1 + RGB_MATRIX_INDICATOR_SET_COLOR(8, 0, 0, 255) //q + RGB_MATRIX_INDICATOR_SET_COLOR(14, 0, 0, 255) //w + RGB_MATRIX_INDICATOR_SET_COLOR(20, 0, 0, 255) //e + RGB_MATRIX_INDICATOR_SET_COLOR(15, 0, 0, 255) //s + RGB_MATRIX_INDICATOR_SET_COLOR(26, 0, 0, 255) //f + RGB_MATRIX_INDICATOR_SET_COLOR(49, 0, 0, 255) //R_Alt + break; + default: + break; + } +} diff --git a/keyboards/gmmk/pro/ansi/keymaps/benschaeff/readme.md b/keyboards/gmmk/pro/ansi/keymaps/benschaeff/readme.md new file mode 100644 index 0000000000..8162002892 --- /dev/null +++ b/keyboards/gmmk/pro/ansi/keymaps/benschaeff/readme.md @@ -0,0 +1,19 @@ +# Description +Pretty simple keymap with a few handy tools on a 2nd layer and rotary encoder. + +# Encoder +Holding tab and scrolling encoder will allow scrolling through applications, as if using alt + tab +Holding ctrl and scrolling encoder will allow scrolling through chrome tabs +FN + Encoder scroll is media next/prev +FN + Encoder press is media pause +default encoder behavior is volume up/down + +# Function Layer +FN + \ is used to put keyboard into bootloader mode +FN + ESC is the same as alt F4, for closing applications +FN + F1 is to close current browser tab +FN + Q moves current application one monitor to the left +FN + W maximizes current application +FN + E moves current application one monitor to the right +FN + S minimizes current application +FN + F is used in junction with the "Popout tab" extension to chrome (https://chrome.google.com/webstore/detail/popout-tab/pcfcieidiaaobigemjnkclebhnmgfbco) to pop out current tab to its own window From a8422cca0324ce61247dd0d8320a3d11a433cecf Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Fri, 15 Oct 2021 22:09:40 -0700 Subject: [PATCH 291/595] [Keyboard] Tractyl Manuform Updates (#14841) --- .../tractyl_manuform/5x6_right/5x6_right.h | 4 ++ .../tractyl_manuform/5x6_right/config.h | 2 + .../5x6_right/elite_c/config.h | 52 +++++++++++++++++++ .../5x6_right/elite_c/elite_c.h | 19 +++++++ .../5x6_right/elite_c/rules.mk | 11 ++++ .../tractyl_manuform/5x6_right/f411/config.h | 3 +- .../tractyl_manuform/5x6_right/f411/readme.md | 3 +- .../5x6_right/keymaps/drashna/config.h | 5 -- .../5x6_right/keymaps/drashna/keymap.c | 9 +++- .../5x6_right/teensy2pp/config.h | 1 + 10 files changed, 101 insertions(+), 8 deletions(-) create mode 100644 keyboards/handwired/tractyl_manuform/5x6_right/elite_c/config.h create mode 100644 keyboards/handwired/tractyl_manuform/5x6_right/elite_c/elite_c.h create mode 100644 keyboards/handwired/tractyl_manuform/5x6_right/elite_c/rules.mk diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/5x6_right.h b/keyboards/handwired/tractyl_manuform/5x6_right/5x6_right.h index e481e7841d..f171d41181 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/5x6_right.h +++ b/keyboards/handwired/tractyl_manuform/5x6_right/5x6_right.h @@ -17,13 +17,17 @@ #pragma once #include "tractyl_manuform.h" + #if defined(KEYBOARD_handwired_tractyl_manuform_5x6_right_f411) # include "f411.h" #elif defined(KEYBOARD_handwired_tractyl_manuform_5x6_right_f303) # include "f303.h" #elif defined(KEYBOARD_handwired_tractyl_manuform_5x6_right_teensy2pp) # include "teensy2pp.h" +#elif defined(KEYBOARD_handwired_tractyl_manuform_5x6_right_elite_c) +# include "elite_c.h" #endif + #include "quantum.h" #define ___ KC_NO diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/config.h index d1860c3378..cd42364b4f 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/config.h +++ b/keyboards/handwired/tractyl_manuform/5x6_right/config.h @@ -50,3 +50,5 @@ along with this program. If not, see . //#define NO_ACTION_ONESHOT #define NO_ACTION_MACRO #define NO_ACTION_FUNCTION + +#define OLED_DISPLAY_128X64 diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/config.h new file mode 100644 index 0000000000..9daec0cd8f --- /dev/null +++ b/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/config.h @@ -0,0 +1,52 @@ +/* +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#define PRODUCT Tractyl Manuform(5x6) Elite C + +// wiring of each half +#define MATRIX_COL_PINS \ + { D4, D7, E6, B4, B5, B7 } +#define MATRIX_ROW_PINS \ + { F7, F6, F5, F4, F1, F0 } + +#define DIODE_DIRECTION COL2ROW + +// WS2812 RGB LED strip input and number of LEDs +#define RGB_DI_PIN D3 +#define RGBLED_NUM 20 +#define RGBLIGHT_SPLIT +#define RGBLED_SPLIT \ + { 10, 10 } +#define RGBLIGHT_LIMIT_VAL 80 +#define OLED_BRIGHTNESS 50 + +#define AUDIO_PIN C6 + +/* serial.c configuration for split keyboard */ +#define SOFT_SERIAL_PIN D2 +#define EE_HANDS + +#define ENCODERS_PAD_A \ + { D5 } +#define ENCODERS_PAD_B \ + { C7 } + +/* PMW3360 Settings */ +#define PMW3360_CS_PIN B6 diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/elite_c.h b/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/elite_c.h new file mode 100644 index 0000000000..525b0378b4 --- /dev/null +++ b/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/elite_c.h @@ -0,0 +1,19 @@ +/* Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "5x6_right.h" diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/rules.mk b/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/rules.mk new file mode 100644 index 0000000000..e594097f8b --- /dev/null +++ b/keyboards/handwired/tractyl_manuform/5x6_right/elite_c/rules.mk @@ -0,0 +1,11 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +LTO_ENABLE := yes +RGBLIGHT_ENABLE = no +OLED_ENABLE = no +AUDIO_ENABLE = no +ENCODER_ENABLE = no diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h index b2a240f9ff..172ccf7bc2 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h @@ -39,6 +39,7 @@ along with this program. If not, see . #define WS2812_PWM_DRIVER PWMD2 // default: PWMD2 #define WS2812_PWM_CHANNEL 2 // default: 2 #define WS2812_PWM_PAL_MODE 1 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2 +#define WS2812_EXTERNAL_PULLUP //#define WS2812_PWM_COMPLEMENTARY_OUTPUT // Define for a complementary timer output (TIMx_CHyN); omit for a normal timer output (TIMx_CHy). #define WS2812_DMA_STREAM STM32_DMA1_STREAM7 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. #define WS2812_DMA_CHANNEL 3 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. @@ -47,7 +48,7 @@ along with this program. If not, see . #define RGBLIGHT_SPLIT #define RGBLED_SPLIT \ { 10, 10 } -#define RGBLIGHT_LIMIT_VAL 80 +#define RGBLIGHT_LMIT_VAL 80 #define DEBUG_LED_PIN C13 diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md b/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md index 6377613814..5fb2c0fc72 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md @@ -9,7 +9,8 @@ * 8KB SPI EEPROM chip sharing PA5-PA7 on SPI1 with PA4 as CS pin * Encoder using PA13 and PA14 * SSD1306 OLED display (128x64) using PB8-PB9 on I2C1 -* Pull-up resistor (22k) on A10 to fix reset issue. +* Pull-up resistor (22k) on PA10 to fix reset issue. +* Pull-up resistor (5.1k) on PA1 for WS2812 LED support, and wire it's VCC to the 5V pin. * Keyboard Maintainer: [Drashna Jael're](https://github.com/drashna) * Hardware Supported: [Design files](https://gitlab.com/keyboards1/dm_r_track/-/tree/master/boolean), [WeAct BlackPill (F411)](https://github.com/WeActTC/MiniSTM32F4x1), [PMW3360 Optical Sensor](https://www.tindie.com/products/jkicklighter/pmw3360-motion-sensor/) diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/config.h index 21bc8e616a..df3e877f98 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/config.h +++ b/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/config.h @@ -24,13 +24,8 @@ #define TRACKBALL_DPI_OPTIONS { 1200, 1800, 2600, 3400 } -#define RGBLIGHT_MAX_BRIGHTNESS 60 - #undef DEBOUNCE #define DEBOUNCE 10 #define SOLENOID_PIN F1 #define SOLENOID_DEFAULT_DWELL 8 - -#define OLED_DISPLAY_128X64 -#define OLED_BRIGHTNESS 50 diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c b/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c index f209206337..be2938ebf6 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c +++ b/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c @@ -348,9 +348,16 @@ void render_kitty(void) { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x06, 0x04, 0x04, 0x04, 0x04, 0x05, 0x04, 0x04, 0x04, 0x07, 0x07, 0x07, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}}; // assumes 1 frame prep stage +#ifdef SWAP_HANDS_ENABLE extern bool swap_hands; +#endif void animation_phase(void) { - if (tap_toggling) { +# ifdef SWAP_HANDS_ENABLE + if (swap_hands) +#else + if (tap_toggling) +#endif + { anim_frame_duration = 300; current_rtogi_frame = (current_rtogi_frame + 1) % RTOGI_FRAMES; oled_write_raw_P(rtogi[abs((RTOGI_FRAMES - 1) - current_rtogi_frame)], ANIM_SIZE); diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/config.h index 2391020598..442d474920 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/config.h +++ b/keyboards/handwired/tractyl_manuform/5x6_right/teensy2pp/config.h @@ -35,6 +35,7 @@ along with this program. If not, see . #define RGBLED_SPLIT \ { 10, 10 } #define RGBLIGHT_LIMIT_VAL 80 +#define OLED_BRIGHTNESS 50 #define DEBUG_LED_PIN D6 From 9a0addc77e3e48b908b846fc78326d4a20c30bc9 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Fri, 15 Oct 2021 22:30:23 -0700 Subject: [PATCH 292/595] [Keymap] Drashna Keymap Updates (#14842) * Fix issues with user split transport code * Improve OLED (More font stuff, improved keylogger, etc) * Add `KEYLOCK` macro to disable USB, borrowed from command feature. * Convert Kyria fully to proton C (no more AVR kyria) * Add Work Louder Work Board keymap --- .../5x6_right/keymaps/drashna/keymap.c | 2 +- keyboards/moonlander/keymaps/drashna/keymap.c | 2 +- .../splitkb/kyria/keymaps/drashna/keymap.c | 4 +- .../splitkb/kyria/keymaps/drashna/rules.mk | 40 +- .../splitkb/zima/keymaps/drashna/config.h | 3 + .../work_board/keymaps/drashna/config.h | 17 + .../work_board/keymaps/drashna/keymap.c | 217 +++ .../work_board/keymaps/drashna/rules.mk | 6 + layouts/community/ergodox/drashna/keymap.c | 2 +- layouts/community/ortho_4x12/drashna/keymap.c | 2 +- layouts/community/ortho_5x12/drashna/keymap.c | 2 +- .../community/split_3x6_3/drashna/keymap.c | 2 +- users/drashna/drashna.c | 5 +- users/drashna/drashna_font.h | 1684 +++++++---------- users/drashna/oled_stuff.c | 36 +- users/drashna/process_records.c | 19 +- users/drashna/process_records.h | 1 + users/drashna/transport_sync.c | 20 +- users/drashna/transport_sync.h | 16 +- 19 files changed, 1031 insertions(+), 1049 deletions(-) create mode 100644 keyboards/work_louder/work_board/keymaps/drashna/config.h create mode 100644 keyboards/work_louder/work_board/keymaps/drashna/keymap.c create mode 100644 keyboards/work_louder/work_board/keymaps/drashna/rules.mk diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c b/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c index be2938ebf6..abfec41a62 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c +++ b/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c @@ -117,7 +117,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_ADJUST] = LAYOUT_5x6_right_wrapper( KC_MAKE, ___________________BLANK___________________, _________________ADJUST_R1_________________, KC_RST, VRSN, _________________ADJUST_L1_________________, _________________ADJUST_R1_________________, EEP_RST, - _______, _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, TG_MODS, + KEYLOCK, _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, TG_MODS, UC_MOD, _________________ADJUST_L3_________________, _________________ADJUST_R3_________________, KC_MPLY, HPT_DWLI, HPT_DWLD, TG_GAME, TG_DBLO, HPT_TOG, HPT_BUZ, KC_NUKE, diff --git a/keyboards/moonlander/keymaps/drashna/keymap.c b/keyboards/moonlander/keymaps/drashna/keymap.c index f6af7e53af..257959c07f 100644 --- a/keyboards/moonlander/keymaps/drashna/keymap.c +++ b/keyboards/moonlander/keymaps/drashna/keymap.c @@ -105,7 +105,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_MAKE, _________________FUNC_LEFT_________________, UC_MOD, KC_NUKE, _________________ADJUST_R1_________________, KC_RST, VRSN, _________________ADJUST_L1_________________, _______, _______, _________________ADJUST_R1_________________, EEP_RST, _______, _________________ADJUST_L2_________________, _______, _______, _________________ADJUST_R2_________________, RGB_IDL, - _______, _________________ADJUST_L3_________________, _________________ADJUST_R3_________________, TG_MODS, + KEYLOCK, _________________ADJUST_L3_________________, _________________ADJUST_R3_________________, TG_MODS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PAUS, _______, _______, _______, _______, _______, _______ ), diff --git a/keyboards/splitkb/kyria/keymaps/drashna/keymap.c b/keyboards/splitkb/kyria/keymaps/drashna/keymap.c index 2dc9346442..6c7ac34d51 100644 --- a/keyboards/splitkb/kyria/keymaps/drashna/keymap.c +++ b/keyboards/splitkb/kyria/keymaps/drashna/keymap.c @@ -92,8 +92,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_ADJUST] = LAYOUT_wrapper( KC_MAKE, _________________ADJUST_L1_________________, _________________ADJUST_R1_________________, KC_RESET, VRSN, _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, EEP_RST, - _______, _________________ADJUST_L3_________________, HPT_TOG, HPT_FBK, MG_NKRO, UC_MOD, _________________ADJUST_R3_________________, TG_MODS, - _______, _______, _______, KC_NUKE, _______, _______, _______, _______, _______, _______ + UC_MOD, _________________ADJUST_L3_________________, HPT_TOG, HPT_FBK, MG_NKRO, UC_MOD, _________________ADJUST_R3_________________, TG_MODS, + _______, _______, KEYLOCK, KC_NUKE, _______, _______, _______, _______, _______, _______ ), // [_LAYERINDEX] = LAYOUT_wrapper( // _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, diff --git a/keyboards/splitkb/kyria/keymaps/drashna/rules.mk b/keyboards/splitkb/kyria/keymaps/drashna/rules.mk index b51cc1b626..6accf8cc03 100644 --- a/keyboards/splitkb/kyria/keymaps/drashna/rules.mk +++ b/keyboards/splitkb/kyria/keymaps/drashna/rules.mk @@ -1,23 +1,19 @@ -OLED_ENABLE = yes -OLED_DRIVER = SSD1306 # Enables the use of OLED displays -ENCODER_ENABLE = yes # ENables the use of one or more encoders -RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -RGBLIGHT_STARTUP_ANIMATION = no +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # USB Nkey Rollover +UNICODE_ENABLE = yes # Unicode +OLED_ENABLE = yes +OLED_DRIVER = SSD1306 # Enables the use of OLED displays +ENCODER_ENABLE = yes # Enables the use of one or more encoders -BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = no # Mouse keys -EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -NKRO_ENABLE = yes # USB Nkey Rollover -UNICODE_ENABLE = no # Unicode -KEY_LOCK_ENABLE = no - - -BOOTLOADER = hid -BOOTLOADER_SIZE = 512 -PROGRAM_CMD = $(HID_BOOTLOADER_CLI) -mmcu=$(MCU) -w -v $(BUILD_DIR)/$(TARGET).hex -# TAP_DANCE_ENABLE = yes - -WPM_ENABLE = yes -SWAP_HANDS_ENABLE = yes +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +RGBLIGHT_STARTUP_ANIMATION = yes +RGB_MATRIX_ENABLE = yes +TAP_DANCE_ENABLE = yes +KEY_LOCK_ENABLE = no +WPM_ENABLE = yes +SWAP_HANDS_ENABLE = yes +LTO_ENABLE = no diff --git a/keyboards/splitkb/zima/keymaps/drashna/config.h b/keyboards/splitkb/zima/keymaps/drashna/config.h index 133ab6a914..8d0908182e 100644 --- a/keyboards/splitkb/zima/keymaps/drashna/config.h +++ b/keyboards/splitkb/zima/keymaps/drashna/config.h @@ -32,3 +32,6 @@ #define OLED_LOGO_SCIFI #define ENCODER_RESOLUTION 2 + +#define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_TWINKLE+4 +#define RGBLIGHT_DEFAULT_HUE 213 diff --git a/keyboards/work_louder/work_board/keymaps/drashna/config.h b/keyboards/work_louder/work_board/keymaps/drashna/config.h new file mode 100644 index 0000000000..5ea4dc7e48 --- /dev/null +++ b/keyboards/work_louder/work_board/keymaps/drashna/config.h @@ -0,0 +1,17 @@ +/* Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once diff --git a/keyboards/work_louder/work_board/keymaps/drashna/keymap.c b/keyboards/work_louder/work_board/keymaps/drashna/keymap.c new file mode 100644 index 0000000000..fb86275da9 --- /dev/null +++ b/keyboards/work_louder/work_board/keymaps/drashna/keymap.c @@ -0,0 +1,217 @@ +/* Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "drashna.h" + +#define PLNK_1 SP_LWER +#define PLNK_2 BK_LWER +#define PLNK_3 DL_RAIS +#define PLNK_4 ET_RAIS + +/* + * The `LAYOUT_ortho_4x12_base` macro is a template to allow the use of identical + * modifiers for the default layouts (eg QWERTY, Colemak, Dvorak, etc), so + * that there is no need to set them up for each layout, and modify all of + * them if I want to change them. This helps to keep consistency and ease + * of use. K## is a placeholder to pass through the individual keycodes + */ +// clang-format off +#define LAYOUT_wrapper(...) LAYOUT(__VA_ARGS__) +#define LAYOUT_base( \ + K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, \ + K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \ + K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A \ + ) \ + LAYOUT_wrapper( \ + KC_ESC, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, KC_DEL, KC_MUTE, \ + LALT_T(KC_TAB), K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, RALT_T(K1B), \ + KC_MLSF, CTL_T(K21), K22, K23, K24, K25, K26, K27, K28, K29, RCTL_T(K2A), KC_ENT, \ + OS_LSFT, OS_LCTL, OS_LALT, OS_LGUI, PLNK_1, PLNK_2, PLNK_3, PLNK_4, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ + ) +#define LAYOUT_base_wrapper(...) LAYOUT_base(__VA_ARGS__) + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_DEFAULT_LAYER_1] = LAYOUT_base_wrapper( + _________________QWERTY_L1_________________, _________________QWERTY_R1_________________, + _________________QWERTY_L2_________________, _________________QWERTY_R2_________________, + _________________QWERTY_L3_________________, _________________QWERTY_R3_________________ + ), + + [_DEFAULT_LAYER_2] = LAYOUT_base_wrapper( + ______________COLEMAK_MOD_DH_L1____________, ______________COLEMAK_MOD_DH_R1____________, + ______________COLEMAK_MOD_DH_L2____________, ______________COLEMAK_MOD_DH_R2____________, + ______________COLEMAK_MOD_DH_L3____________, ______________COLEMAK_MOD_DH_R3____________ + ), + [_DEFAULT_LAYER_3] = LAYOUT_base_wrapper( + _________________COLEMAK_L1________________, _________________COLEMAK_R1________________, + _________________COLEMAK_L2________________, _________________COLEMAK_R2________________, + _________________COLEMAK_L3________________, _________________COLEMAK_R3________________ + ), + + [_DEFAULT_LAYER_4] = LAYOUT_base_wrapper( + _________________DVORAK_L1_________________, _________________DVORAK_R1_________________, + _________________DVORAK_L2_________________, _________________DVORAK_R2_________________, + _________________DVORAK_L3_________________, _________________DVORAK_R3_________________ + ), + + [_LOWER] = LAYOUT_wrapper( + KC_TILD, _________________LOWER_L1__________________, _________________LOWER_R1__________________, KC_BSPC, _______, + KC_DEL, _________________LOWER_L2__________________, _________________LOWER_R2__________________, KC_PIPE, + _______, _________________LOWER_L3__________________, _________________LOWER_R3__________________, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [_RAISE] = LAYOUT_wrapper( + KC_GRV, _________________RAISE_L1__________________, _________________RAISE_R1__________________, KC_BSPC, _______, + KC_DEL, _________________RAISE_L2__________________, _________________RAISE_R2__________________, KC_BSLS, + _______, _________________RAISE_L3__________________, _________________RAISE_R3__________________, _______, + _______, _______, _______, _______, _______, _______, _______, _________________RAISE_R3__________________ + ), + + [_ADJUST] = LAYOUT_wrapper( + KC_MAKE, _________________ADJUST_L1_________________, _________________ADJUST_R1_________________, KC_RST, _______, + VRSN, _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, EEP_RST, + _______, _________________ADJUST_L3_________________, _________________ADJUST_R3_________________, RGB_IDL, + KEYLOCK, _______, _______, _______, _______, KC_NUKE, _______, _______, _______, _______, _______, TG_MODS + ) + +}; + +#ifdef ENCODER_ENABLE +# ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][2] = { + [_DEFAULT_LAYER_1] = { { KC_DOWN, KC_UP } }, + [_DEFAULT_LAYER_2] = { { _______, _______ } }, + [_DEFAULT_LAYER_3] = { { _______, _______ } }, + [_DEFAULT_LAYER_4] = { { _______, _______ } }, + [_GAMEPAD] = { { _______, _______ } }, + [_DIABLO] = { { _______, _______ } }, + [_MOUSE] = { { KC_WH_D, KC_WH_U } }, + [_MEDIA] = { { _______, _______ } }, + [_RAISE] = { { KC_VOLD, KC_VOLU } }, + [_LOWER] = { { RGB_MOD, RGB_RMOD} }, + [_ADJUST] = { { CK_DOWN, CK_UP } }, +}; +// clang-format on +# else +bool encoder_update_user(uint8_t index, bool clockwise) { + switch (get_highest_layer(layer_state)) { + case _RAISE: + clockwise ? rgblight_step() : rgblight_step_reverse(); + break; + case _LOWER: + clockwise ? rgb_matrix_step() : rgb_matrix_step_reverse(); + break; + default: + clockwise ? tap_code(KC_VOLD) : tap_code(KC_VOLU); + break; + } + return false; +} +# endif // ENCODER_ENABLE + +#endif + +void rgb_matrix_indicators_user(void) {} + +void rgb_matrix_indicators_advanced_user(uint8_t led_min, uint8_t led_max) { + uint8_t this_mod = get_mods(); + uint8_t this_led = host_keyboard_leds(); + uint8_t this_osm = get_oneshot_mods(); +#define THUMB_LED 6 +#define RGB_MATRIX_INDICATOR_SET_COLOR_wrapper(...) RGB_MATRIX_INDICATOR_SET_COLOR(__VA_ARGS__) + if (!userspace_config.rgb_layer_change) { + switch (get_highest_layer(layer_state | default_layer_state)) { + case _GAMEPAD: + rgb_matrix_layer_helper(HSV_ORANGE, 1, rgb_matrix_config.speed, LED_FLAG_MODIFIER, led_min, led_max); + break; + case _DIABLO: + rgb_matrix_layer_helper(HSV_RED, 1, rgb_matrix_config.speed * 8, LED_FLAG_MODIFIER, led_min, led_max); + break; + case _RAISE: + rgb_matrix_layer_helper(HSV_YELLOW, 1, rgb_matrix_config.speed, LED_FLAG_MODIFIER, led_min, led_max); + break; + case _LOWER: + rgb_matrix_layer_helper(HSV_GREEN, 1, rgb_matrix_config.speed, LED_FLAG_MODIFIER, led_min, led_max); + break; + case _ADJUST: + rgb_matrix_layer_helper(HSV_RED, 1, rgb_matrix_config.speed, LED_FLAG_MODIFIER, led_min, led_max); + break; + case _DEFAULT_LAYER_1: + rgb_matrix_layer_helper(DEFAULT_LAYER_1_HSV, 0, rgb_matrix_config.speed, LED_FLAG_MODIFIER, led_min, led_max); + break; + case _DEFAULT_LAYER_2: + rgb_matrix_layer_helper(DEFAULT_LAYER_2_HSV, 0, rgb_matrix_config.speed, LED_FLAG_MODIFIER, led_min, led_max); + break; + case _DEFAULT_LAYER_3: + rgb_matrix_layer_helper(DEFAULT_LAYER_3_HSV, 0, rgb_matrix_config.speed, LED_FLAG_MODIFIER, led_min, led_max); + break; + case _DEFAULT_LAYER_4: + rgb_matrix_layer_helper(DEFAULT_LAYER_4_HSV, 0, rgb_matrix_config.speed, LED_FLAG_MODIFIER, led_min, led_max); + break; + } + } + + extern bool host_driver_disabled; + if (host_driver_disabled) { + RGB_MATRIX_INDICATOR_SET_COLOR_wrapper(THUMB_LED, RGB_OFF); + } else { + switch (get_highest_layer(default_layer_state)) { + case _DEFAULT_LAYER_1: + RGB_MATRIX_INDICATOR_SET_COLOR_wrapper(THUMB_LED, DEFAULT_LAYER_1_RGB); + break; + case _DEFAULT_LAYER_2: + RGB_MATRIX_INDICATOR_SET_COLOR_wrapper(THUMB_LED, DEFAULT_LAYER_2_RGB); + break; + case _DEFAULT_LAYER_3: + RGB_MATRIX_INDICATOR_SET_COLOR_wrapper(THUMB_LED, DEFAULT_LAYER_3_RGB); + break; + case _DEFAULT_LAYER_4: + RGB_MATRIX_INDICATOR_SET_COLOR_wrapper(THUMB_LED, DEFAULT_LAYER_4_RGB); + break; + } + } + + if ((this_mod | this_osm) & MOD_MASK_SHIFT || this_led & (1 << USB_LED_CAPS_LOCK)) { + if (!layer_state_is(_ADJUST)) { + RGB_MATRIX_INDICATOR_SET_COLOR(12, 0x00, 0xFF, 0x00); + RGB_MATRIX_INDICATOR_SET_COLOR(13, 0x00, 0xFF, 0x00); + } + RGB_MATRIX_INDICATOR_SET_COLOR(24, 0x00, 0xFF, 0x00); + } + if ((this_mod | this_osm) & MOD_MASK_CTRL) { + RGB_MATRIX_INDICATOR_SET_COLOR(11, 0xFF, 0x00, 0x00); + RGB_MATRIX_INDICATOR_SET_COLOR(23, 0xFF, 0x00, 0x00); + RGB_MATRIX_INDICATOR_SET_COLOR(14, 0xFF, 0x00, 0x00); + } + if ((this_mod | this_osm) & MOD_MASK_GUI) { + RGB_MATRIX_INDICATOR_SET_COLOR(9, 0xFF, 0xD9, 0x00); + } + if ((this_mod | this_osm) & MOD_MASK_ALT) { + RGB_MATRIX_INDICATOR_SET_COLOR(10, 0x00, 0x00, 0xFF); + RGB_MATRIX_INDICATOR_SET_COLOR(25, 0x00, 0x00, 0xFF); + RGB_MATRIX_INDICATOR_SET_COLOR(36, 0x00, 0x00, 0xFF); + } + if (layer_state_is(_LOWER)) { + RGB_MATRIX_INDICATOR_SET_COLOR(7, 0x00, 0xFF, 0x00); + RGB_MATRIX_INDICATOR_SET_COLOR(8, 0x00, 0xFF, 0x00); + } + if (layer_state_is(_RAISE)) { + RGB_MATRIX_INDICATOR_SET_COLOR(4, 0xFF, 0xFF, 0x00); + RGB_MATRIX_INDICATOR_SET_COLOR(5, 0xFF, 0xFF, 0x00); + } +} diff --git a/keyboards/work_louder/work_board/keymaps/drashna/rules.mk b/keyboards/work_louder/work_board/keymaps/drashna/rules.mk new file mode 100644 index 0000000000..6a4558aa0e --- /dev/null +++ b/keyboards/work_louder/work_board/keymaps/drashna/rules.mk @@ -0,0 +1,6 @@ +BOOTMAGIC_ENABLE = lite +EXTRAKEY_ENABLE = yes +TAP_DANCE_ENABLE = no +NKRO_ENABLE = yes +RGBLIGHT_STARTUP_ANIMATION = yes +ENCODER_MAP_ENABLE = yes diff --git a/layouts/community/ergodox/drashna/keymap.c b/layouts/community/ergodox/drashna/keymap.c index 430328fed7..dd47899d7a 100644 --- a/layouts/community/ergodox/drashna/keymap.c +++ b/layouts/community/ergodox/drashna/keymap.c @@ -174,7 +174,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_MAKE, _______, _______, _______, _______, _______, UC_MOD, KC_NUKE, _________________ADJUST_R1_________________, KC_RST, VRSN, _________________ADJUST_L1_________________, _______, _______, _________________ADJUST_R1_________________, EEP_RST, _______, _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, RGB_IDL, - _______, _________________ADJUST_L3_________________, _______, _______, _________________ADJUST_R3_________________, TG_MODS, + KEYLOCK, _________________ADJUST_L3_________________, _______, _______, _________________ADJUST_R3_________________, TG_MODS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, diff --git a/layouts/community/ortho_4x12/drashna/keymap.c b/layouts/community/ortho_4x12/drashna/keymap.c index cb3166c940..3ba9cf64f9 100644 --- a/layouts/community/ortho_4x12/drashna/keymap.c +++ b/layouts/community/ortho_4x12/drashna/keymap.c @@ -106,7 +106,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_MAKE, _________________ADJUST_L1_________________, _________________ADJUST_R1_________________, KC_RST, VRSN, _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, EEP_RST, TH_LVL, _________________ADJUST_L3_________________, _________________ADJUST_R3_________________, RGB_IDL, - HPT_TOG, _______, _______, _______, _______, KC_NUKE, _______, _______, _______, _______, _______, TG_MODS + KEYLOCK, _______, _______, _______, _______, KC_NUKE, _______, _______, _______, _______, _______, TG_MODS ) }; diff --git a/layouts/community/ortho_5x12/drashna/keymap.c b/layouts/community/ortho_5x12/drashna/keymap.c index 01b06d627d..ab70be2822 100644 --- a/layouts/community/ortho_5x12/drashna/keymap.c +++ b/layouts/community/ortho_5x12/drashna/keymap.c @@ -124,7 +124,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_MAKE, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_RST, VRSN, _________________ADJUST_L1_________________, _________________ADJUST_R1_________________, EEP_RST, _______, _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, RGB_IDL, - _______, _________________ADJUST_L3_________________, _________________ADJUST_R3_________________, TG_MODS, + KEYLOCK, _________________ADJUST_L3_________________, _________________ADJUST_R3_________________, TG_MODS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) }; diff --git a/layouts/community/split_3x6_3/drashna/keymap.c b/layouts/community/split_3x6_3/drashna/keymap.c index a3145a4044..7c31972e3f 100644 --- a/layouts/community/split_3x6_3/drashna/keymap.c +++ b/layouts/community/split_3x6_3/drashna/keymap.c @@ -89,7 +89,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_ADJUST] = LAYOUT_split_3x6_3_wrapper( \ KC_MAKE, _________________ADJUST_L1_________________, _________________ADJUST_R1_________________, KC_RESET, VRSN, _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, EEP_RST, - MG_NKRO, _________________ADJUST_L3_________________, _________________ADJUST_R3_________________, RGB_IDL, + KEYLOCK, _________________ADJUST_L3_________________, _________________ADJUST_R3_________________, RGB_IDL, HPT_TOG, KC_NUKE, _______, _______, TG_MODS, HPT_FBK ) }; diff --git a/users/drashna/drashna.c b/users/drashna/drashna.c index 871136c137..71539e8b80 100644 --- a/users/drashna/drashna.c +++ b/users/drashna/drashna.c @@ -103,8 +103,11 @@ void shutdown_user(void) { #ifdef RGB_MATRIX_ENABLE rgb_matrix_set_color_all(0xFF, 0x00, 0x00); rgb_matrix_update_pwm_buffers(); - #endif // RGB_MATRIX_ENABLE +#ifdef OLED_ENABLE + oled_off(); +#endif + shutdown_keymap(); } diff --git a/users/drashna/drashna_font.h b/users/drashna/drashna_font.h index e9353e62a9..27dc8b1b5d 100644 --- a/users/drashna/drashna_font.h +++ b/users/drashna/drashna_font.h @@ -6,660 +6,559 @@ #if __has_include("../../../../Documents/qmk/oled_font.h") # include "../../../../Documents/qmk/oled_font.h" #else + +// additional fonts from +// https://github.com/datacute/TinyOLED-Fonts + # include "progmem.h" // clang-format off static const unsigned char font[] PROGMEM = { - 0x07, 0x08, 0x7F, 0x08, 0x07, 0x00, // 0x00 0 - 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00, // 0x01 1 - 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00, // 0x02 2 - 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00, // 0x03 3 ♥ - 0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00, // 0x04 4 ♦ - 0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00, // 0x05 5 ♧ - 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00, // 0x06 6 ♤ - 0x00, 0x18, 0x3C, 0x18, 0x00, 0x00, // 0x07 7 - 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00, // 0x08 8 - 0x00, 0x18, 0x24, 0x18, 0x00, 0x00, // 0x09 9 - 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00, // 0x0A 10 - 0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00, // 0x0B 11 ♂ - 0x26, 0x29, 0x79, 0x29, 0x26, 0x00, // 0x0C 12 ♀ - 0x40, 0x7F, 0x05, 0x05, 0x07, 0x00, // 0x0D 13 ♪ - 0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00, // 0x0E 14 ♫ - 0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00, // 0x0F 15 - 0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00, // 0x10 16 - 0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00, // 0x11 17 - 0x14, 0x22, 0x7F, 0x22, 0x14, 0x00, // 0x12 18 ↕ - 0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00, // 0x13 19 ‼ - 0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00, // 0x14 20 ¶ - 0x00, 0x66, 0x89, 0x95, 0x6A, 0x00, // 0x15 21 § - 0x60, 0x60, 0x60, 0x60, 0x60, 0x00, // 0x16 22 _ - 0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00, // 0x17 23 ↨ - 0x08, 0x04, 0x7E, 0x04, 0x08, 0x00, // 0x18 24 ↑ - 0x10, 0x20, 0x7E, 0x20, 0x10, 0x00, // 0x19 25 ↓ - 0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00, // 0x1A 26 → - 0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00, // 0x1B 27 ← - 0x1E, 0x10, 0x10, 0x10, 0x10, 0x00, // 0x1C 28 ⌙h - 0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00, // 0x1D 29 ↭ - 0x30, 0x38, 0x3E, 0x38, 0x30, 0x00, // 0x1E 30 - 0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00, // 0x1F 31 + 0x07, 0x08, 0x7F, 0x08, 0x07, 0x00, + 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00, + 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00, + 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00, + 0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00, + 0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00, + 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00, + 0x00, 0x18, 0x3C, 0x18, 0x00, 0x00, + 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00, + 0x00, 0x18, 0x24, 0x18, 0x00, 0x00, + 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00, + 0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00, + 0x26, 0x29, 0x79, 0x29, 0x26, 0x00, + 0x40, 0x7F, 0x05, 0x05, 0x07, 0x00, + 0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00, + 0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00, + 0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00, + 0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00, + 0x14, 0x22, 0x7F, 0x22, 0x14, 0x00, + 0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00, + 0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00, + 0x00, 0x66, 0x89, 0x95, 0x6A, 0x00, + 0x60, 0x60, 0x60, 0x60, 0x60, 0x00, + 0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00, + 0x08, 0x04, 0x7E, 0x04, 0x08, 0x00, + 0x10, 0x20, 0x7E, 0x20, 0x10, 0x00, + 0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00, + 0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00, + 0x1E, 0x10, 0x10, 0x10, 0x10, 0x00, + 0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00, + 0x30, 0x38, 0x3E, 0x38, 0x30, 0x00, + 0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00, + # if defined(OLED_FONT_5X5) - 0x00,0x00,0x00,0x00,0x00,0x00, // 0x20 32 - 0x5c,0x00,0x00,0x00,0x00,0x00, // 0x21 33 ! - 0x06,0x00,0x06,0x00,0x00,0x00, // 0x22 34 " - 0x28,0x7c,0x28,0x7c,0x28,0x00, // 0x23 35 # - 0x5c,0x54,0xfe,0x54,0x74,0x00, // 0x24 36 $ - 0x44,0x20,0x10,0x08,0x44,0x00, // 0x25 37 % - 0x28,0x54,0x54,0x20,0x50,0x00, // 0x26 38 & - 0x06,0x00,0x00,0x00,0x00,0x00, // 0x27 39 ' - 0x38,0x44,0x00,0x00,0x00,0x00, // 0x28 40 ( - 0x44,0x38,0x00,0x00,0x00,0x00, // 0x29 41 ) - 0x02,0x07,0x02,0x00,0x00,0x00, // 0x2A 42 * - 0x10,0x10,0x7c,0x10,0x10,0x00, // 0x2B 43 + - 0xc0,0x00,0x00,0x00,0x00,0x00, // 0x2C 44 , - 0x10,0x10,0x10,0x10,0x10,0x00, // 0x2D 45 - - 0x40,0x00,0x00,0x00,0x00,0x00, // 0x2E 46 . - 0x60,0x10,0x0c,0x00,0x00,0x00, // 0x2F 47 / - 0x7c,0x64,0x54,0x4c,0x7c,0x00, // 0x30 48 0 - 0x48,0x7c,0x40,0x00,0x00,0x00, // 0x31 49 1 - 0x64,0x54,0x54,0x54,0x48,0x00, // 0x32 50 2 - 0x44,0x54,0x54,0x54,0x6c,0x00, // 0x33 51 3 - 0x3c,0x20,0x70,0x20,0x20,0x00, // 0x34 52 4 - 0x5c,0x54,0x54,0x54,0x24,0x00, // 0x35 53 5 - 0x7c,0x54,0x54,0x54,0x74,0x00, // 0x36 54 6 - 0x04,0x04,0x64,0x14,0x0c,0x00, // 0x37 55 7 - 0x7c,0x54,0x54,0x54,0x7c,0x00, // 0x38 56 8 - 0x5c,0x54,0x54,0x54,0x7c,0x00, // 0x39 57 9 - 0x44,0x00,0x00,0x00,0x00,0x00, // 0x3A 58 : - 0xc4,0x00,0x00,0x00,0x00,0x00, // 0x3B 59 ; - 0x10,0x28,0x44,0x00,0x00,0x00, // 0x3C 60 < - 0x28,0x28,0x28,0x28,0x28,0x00, // 0x3D 61 = - 0x44,0x28,0x10,0x00,0x00,0x00, // 0x3E 62 > - 0x08,0x04,0x54,0x08,0x00,0x00, // 0x3F 63 ? - 0x7c,0x44,0x54,0x54,0x5c,0x00, // 0x40 64 @ - 0x7c,0x24,0x24,0x24,0x7c,0x00, // 0x41 65 A - 0x7c,0x54,0x54,0x54,0x6c,0x00, // 0x42 66 B - 0x7c,0x44,0x44,0x44,0x44,0x00, // 0x43 67 C - 0x7c,0x44,0x44,0x44,0x38,0x00, // 0x44 68 D - 0x7c,0x54,0x54,0x54,0x44,0x00, // 0x45 69 E - 0x7c,0x14,0x14,0x14,0x04,0x00, // 0x46 70 F - 0x7c,0x44,0x44,0x54,0x74,0x00, // 0x47 71 G - 0x7c,0x10,0x10,0x10,0x7c,0x00, // 0x48 72 H - 0x44,0x44,0x7c,0x44,0x44,0x00, // 0x49 73 I - 0x60,0x40,0x40,0x44,0x7c,0x00, // 0x4A 74 J - 0x7c,0x10,0x10,0x28,0x44,0x00, // 0x4B 75 K - 0x7c,0x40,0x40,0x40,0x40,0x00, // 0x4C 76 L - 0x7c,0x08,0x10,0x08,0x7c,0x00, // 0x4D 77 M - 0x7c,0x08,0x10,0x20,0x7c,0x00, // 0x4E 78 N - 0x38,0x44,0x44,0x44,0x38,0x00, // 0x4F 79 O - 0x7c,0x14,0x14,0x14,0x08,0x00, // 0x50 80 P - 0x3c,0x24,0x64,0x24,0x3c,0x00, // 0x51 81 Q - 0x7c,0x14,0x14,0x14,0x68,0x00, // 0x52 82 R - 0x5c,0x54,0x54,0x54,0x74,0x00, // 0x53 83 S - 0x04,0x04,0x7c,0x04,0x04,0x00, // 0x54 84 T - 0x7c,0x40,0x40,0x40,0x7c,0x00, // 0x55 85 U - 0x0c,0x30,0x40,0x30,0x0c,0x00, // 0x56 86 V - 0x3c,0x40,0x30,0x40,0x3c,0x00, // 0x57 87 W - 0x44,0x28,0x10,0x28,0x44,0x00, // 0x58 88 X - 0x0c,0x10,0x60,0x10,0x0c,0x00, // 0x59 89 Y - 0x44,0x64,0x54,0x4c,0x44,0x00, // 0x5A 90 Z - 0x7c,0x44,0x00,0x00,0x00,0x00, // 0x5B 91 [ - 0x0c,0x10,0x60,0x00,0x00,0x00, // 0x5C 92 \ backslash - 0x44,0x7c,0x00,0x00,0x00,0x00, // 0x5D 93 ] - 0x00,0x01,0x00,0x01,0x00,0x00, // 0x5E 94 ^ - 0x40,0x40,0x40,0x40,0x40,0x40, // 0x5F 95 _ - 0x00,0x01,0x00,0x00,0x00,0x00, // 0x60 96 ` - 0x7c,0x24,0x24,0x24,0x7c,0x00, // 0x61 97 a - 0x7c,0x54,0x54,0x54,0x6c,0x00, // 0x62 98 b - 0x7c,0x44,0x44,0x44,0x44,0x00, // 0x63 99 c - 0x7c,0x44,0x44,0x44,0x38,0x00, // 0x64 100 d - 0x7c,0x54,0x54,0x54,0x44,0x00, // 0x65 101 e - 0x7c,0x14,0x14,0x14,0x04,0x00, // 0x66 102 f - 0x7c,0x44,0x44,0x54,0x74,0x00, // 0x67 103 g - 0x7c,0x10,0x10,0x10,0x7c,0x00, // 0x68 104 h - 0x44,0x44,0x7c,0x44,0x44,0x00, // 0x69 105 i - 0x60,0x40,0x40,0x44,0x7c,0x00, // 0x6A 106 j - 0x7c,0x10,0x10,0x28,0x44,0x00, // 0x6B 107 k - 0x7c,0x40,0x40,0x40,0x40,0x00, // 0x6C 108 l - 0x7c,0x08,0x10,0x08,0x7c,0x00, // 0x6D 109 m - 0x7c,0x08,0x10,0x20,0x7c,0x00, // 0x6E 110 n - 0x38,0x44,0x44,0x44,0x38,0x00, // 0x6F 111 o - 0x7c,0x14,0x14,0x14,0x08,0x00, // 0x70 112 p - 0x3c,0x24,0x64,0x24,0x3c,0x00, // 0x71 113 q - 0x7c,0x14,0x14,0x14,0x68,0x00, // 0x72 114 r - 0x5c,0x54,0x54,0x54,0x74,0x00, // 0x73 115 s - 0x04,0x04,0x7c,0x04,0x04,0x00, // 0x74 116 t - 0x7c,0x40,0x40,0x40,0x7c,0x00, // 0x75 117 u - 0x0c,0x30,0x40,0x30,0x0c,0x00, // 0x76 118 v - 0x3c,0x40,0x30,0x40,0x3c,0x00, // 0x77 119 w - 0x44,0x28,0x10,0x28,0x44,0x00, // 0x78 120 x - 0x0c,0x10,0x60,0x10,0x0c,0x00, // 0x79 121 y - 0x44,0x64,0x54,0x4c,0x44,0x00, // 0x7A 122 z - 0x10,0x7c,0x44,0x00,0x00,0x00, // 0x7B 123 { - 0x6c,0x00,0x00,0x00,0x00,0x00, // 0x7C 124 | - 0x44,0x7c,0x10,0x00,0x00,0x00, // 0x7D 125 } - 0x02,0x01,0x02,0x01,0x00,0x00, // 0x7E 126 ~ - 0x00,0x00,0x00,0x00,0x00,0x00, // 0x7F 127 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x5c, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x06, 0x00, 0x06, 0x00, 0x00, 0x00, + 0x28, 0x7c, 0x28, 0x7c, 0x28, 0x00, + 0x5c, 0x54, 0xfe, 0x54, 0x74, 0x00, + 0x44, 0x20, 0x10, 0x08, 0x44, 0x00, + 0x28, 0x54, 0x54, 0x20, 0x50, 0x00, + 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x38, 0x44, 0x00, 0x00, 0x00, 0x00, + 0x44, 0x38, 0x00, 0x00, 0x00, 0x00, + 0x02, 0x07, 0x02, 0x00, 0x00, 0x00, + 0x10, 0x10, 0x7c, 0x10, 0x10, 0x00, + 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x10, 0x10, 0x10, 0x10, 0x10, 0x00, + 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x60, 0x10, 0x0c, 0x00, 0x00, 0x00, + 0x7c, 0x64, 0x54, 0x4c, 0x7c, 0x00, + 0x48, 0x7c, 0x40, 0x00, 0x00, 0x00, + 0x64, 0x54, 0x54, 0x54, 0x48, 0x00, + 0x44, 0x54, 0x54, 0x54, 0x6c, 0x00, + 0x3c, 0x20, 0x70, 0x20, 0x20, 0x00, + 0x5c, 0x54, 0x54, 0x54, 0x24, 0x00, + 0x7c, 0x54, 0x54, 0x54, 0x74, 0x00, + 0x04, 0x04, 0x64, 0x14, 0x0c, 0x00, + 0x7c, 0x54, 0x54, 0x54, 0x7c, 0x00, + 0x5c, 0x54, 0x54, 0x54, 0x7c, 0x00, + 0x44, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xc4, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x10, 0x28, 0x44, 0x00, 0x00, 0x00, + 0x28, 0x28, 0x28, 0x28, 0x28, 0x00, + 0x44, 0x28, 0x10, 0x00, 0x00, 0x00, + 0x08, 0x04, 0x54, 0x08, 0x00, 0x00, + 0x7c, 0x44, 0x54, 0x54, 0x5c, 0x00, + 0x7c, 0x24, 0x24, 0x24, 0x7c, 0x00, + 0x7c, 0x54, 0x54, 0x54, 0x6c, 0x00, + 0x7c, 0x44, 0x44, 0x44, 0x44, 0x00, + 0x7c, 0x44, 0x44, 0x44, 0x38, 0x00, + 0x7c, 0x54, 0x54, 0x54, 0x44, 0x00, + 0x7c, 0x14, 0x14, 0x14, 0x04, 0x00, + 0x7c, 0x44, 0x44, 0x54, 0x74, 0x00, + 0x7c, 0x10, 0x10, 0x10, 0x7c, 0x00, + 0x44, 0x44, 0x7c, 0x44, 0x44, 0x00, + 0x60, 0x40, 0x40, 0x44, 0x7c, 0x00, + 0x7c, 0x10, 0x10, 0x28, 0x44, 0x00, + 0x7c, 0x40, 0x40, 0x40, 0x40, 0x00, + 0x7c, 0x08, 0x10, 0x08, 0x7c, 0x00, + 0x7c, 0x08, 0x10, 0x20, 0x7c, 0x00, + 0x38, 0x44, 0x44, 0x44, 0x38, 0x00, + 0x7c, 0x14, 0x14, 0x14, 0x08, 0x00, + 0x3c, 0x24, 0x64, 0x24, 0x3c, 0x00, + 0x7c, 0x14, 0x14, 0x14, 0x68, 0x00, + 0x5c, 0x54, 0x54, 0x54, 0x74, 0x00, + 0x04, 0x04, 0x7c, 0x04, 0x04, 0x00, + 0x7c, 0x40, 0x40, 0x40, 0x7c, 0x00, + 0x0c, 0x30, 0x40, 0x30, 0x0c, 0x00, + 0x3c, 0x40, 0x30, 0x40, 0x3c, 0x00, + 0x44, 0x28, 0x10, 0x28, 0x44, 0x00, + 0x0c, 0x10, 0x60, 0x10, 0x0c, 0x00, + 0x44, 0x64, 0x54, 0x4c, 0x44, 0x00, + 0x7c, 0x44, 0x00, 0x00, 0x00, 0x00, + 0x0c, 0x10, 0x60, 0x00, 0x00, 0x00, + 0x44, 0x7c, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x01, 0x00, 0x01, 0x00, 0x00, + 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, + 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, + 0x7c, 0x24, 0x24, 0x24, 0x7c, 0x00, + 0x7c, 0x54, 0x54, 0x54, 0x6c, 0x00, + 0x7c, 0x44, 0x44, 0x44, 0x44, 0x00, + 0x7c, 0x44, 0x44, 0x44, 0x38, 0x00, + 0x7c, 0x54, 0x54, 0x54, 0x44, 0x00, + 0x7c, 0x14, 0x14, 0x14, 0x04, 0x00, + 0x7c, 0x44, 0x44, 0x54, 0x74, 0x00, + 0x7c, 0x10, 0x10, 0x10, 0x7c, 0x00, + 0x44, 0x44, 0x7c, 0x44, 0x44, 0x00, + 0x60, 0x40, 0x40, 0x44, 0x7c, 0x00, + 0x7c, 0x10, 0x10, 0x28, 0x44, 0x00, + 0x7c, 0x40, 0x40, 0x40, 0x40, 0x00, + 0x7c, 0x08, 0x10, 0x08, 0x7c, 0x00, + 0x7c, 0x08, 0x10, 0x20, 0x7c, 0x00, + 0x38, 0x44, 0x44, 0x44, 0x38, 0x00, + 0x7c, 0x14, 0x14, 0x14, 0x08, 0x00, + 0x3c, 0x24, 0x64, 0x24, 0x3c, 0x00, + 0x7c, 0x14, 0x14, 0x14, 0x68, 0x00, + 0x5c, 0x54, 0x54, 0x54, 0x74, 0x00, + 0x04, 0x04, 0x7c, 0x04, 0x04, 0x00, + 0x7c, 0x40, 0x40, 0x40, 0x7c, 0x00, + 0x0c, 0x30, 0x40, 0x30, 0x0c, 0x00, + 0x3c, 0x40, 0x30, 0x40, 0x3c, 0x00, + 0x44, 0x28, 0x10, 0x28, 0x44, 0x00, + 0x0c, 0x10, 0x60, 0x10, 0x0c, 0x00, + 0x44, 0x64, 0x54, 0x4c, 0x44, 0x00, + 0x10, 0x7c, 0x44, 0x00, 0x00, 0x00, + 0x6c, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x44, 0x7c, 0x10, 0x00, 0x00, 0x00, + 0x02, 0x01, 0x02, 0x01, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # lif defined(OLED_FONT_AZTECH) - 0x00,0x00,0x00,0x00,0x00,0x00, // 0x20 32 - 0x00,0x2e,0x00,0x00,0x00,0x00, // 0x21 33 ! - 0x00,0x02,0x00,0x02,0x00,0x00, // 0x22 34 " - 0x00,0x0a,0x1e,0x0a,0x1e,0x00, // 0x23 35 # - 0x00,0x0e,0x2a,0x6b,0x2a,0x3a, // 0x24 36 $ - 0x00,0x06,0x06,0x26,0x18,0x06, // 0x25 37 % - 0x38,0x3e,0x2a,0x2a,0x28,0x38, // 0x26 38 & - 0x18,0x02,0x00,0x00,0x00,0x00, // 0x27 39 ' - 0x00,0x3e,0x22,0x00,0x00,0x00, // 0x28 40 ( - 0x00,0x22,0x3e,0x00,0x00,0x00, // 0x29 41 ) - 0x00,0x0e,0x0e,0x0e,0x04,0x00, // 0x2A 42 * - 0x00,0x08,0x1c,0x08,0x00,0x00, // 0x2B 43 + - 0x00,0x20,0x00,0x00,0x00,0x00, // 0x2C 44 , - 0x00,0x08,0x08,0x08,0x00,0x00, // 0x2D 45 - - 0x00,0x20,0x00,0x00,0x00,0x00, // 0x2E 46 . - 0x00,0x20,0x18,0x06,0x00,0x00, // 0x2F 47 / - 0x00,0x3e,0x22,0x2a,0x22,0x3e, // 0x30 48 0 - 0x02,0x3e,0x00,0x00,0x00,0x00, // 0x31 49 1 - 0x00,0x38,0x28,0x2a,0x2a,0x2e, // 0x32 50 2 - 0x00,0x22,0x2a,0x2e,0x38,0x00, // 0x33 51 3 - 0x00,0x0e,0x08,0x08,0x3e,0x08, // 0x34 52 4 - 0x00,0x2e,0x2a,0x2a,0x28,0x38, // 0x35 53 5 - 0x00,0x3e,0x2a,0x2a,0x28,0x38, // 0x36 54 6 - 0x00,0x06,0x02,0x02,0x0a,0x3e, // 0x37 55 7 - 0x00,0x38,0x2e,0x2a,0x2e,0x38, // 0x38 56 8 - 0x00,0x0e,0x0a,0x2a,0x2a,0x3e, // 0x39 57 9 - 0x00,0x28,0x00,0x00,0x00,0x00, // 0x3A 58 : - 0x00,0x28,0x00,0x00,0x00,0x00, // 0x3B 59 ; - 0x00,0x08,0x14,0x22,0x00,0x00, // 0x3C 60 < - 0x00,0x14,0x14,0x14,0x14,0x00, // 0x3D 61 = - 0x00,0x22,0x14,0x08,0x00,0x00, // 0x3E 62 > - 0x00,0x06,0x02,0x2a,0x0a,0x06, // 0x3F 63 ? - 0x00,0x3e,0x02,0x3a,0x2a,0x0a, // 0x40 64 @ - 0x22,0x3e,0x02,0x0a,0x0a,0x3e, // 0x41 65 A - 0x00,0x3e,0x22,0x2a,0x2e,0x38, // 0x42 66 B - 0x00,0x3e,0x22,0x22,0x20,0x30, // 0x43 67 C - 0x00,0x3e,0x22,0x22,0x22,0x3c, // 0x44 68 D - 0x00,0x3e,0x2a,0x22,0x20,0x30, // 0x45 69 E - 0x00,0x3e,0x0a,0x0a,0x06,0x02, // 0x46 70 F - 0x00,0x3e,0x22,0x2a,0x28,0x38, // 0x47 71 G - 0x00,0x3e,0x08,0x08,0x08,0x3e, // 0x48 72 H - 0x00,0x22,0x3e,0x22,0x00,0x00, // 0x49 73 I - 0x00,0x30,0x20,0x20,0x22,0x3e, // 0x4A 74 J - 0x00,0x3e,0x08,0x08,0x0e,0x38, // 0x4B 75 K - 0x00,0x3e,0x20,0x20,0x20,0x30, // 0x4C 76 L - 0x00,0x3e,0x02,0x3e,0x20,0x3e, // 0x4D 77 M - 0x3e,0x3e,0x02,0x3e,0x20,0x3e, // 0x4E 78 N - 0x00,0x3e,0x22,0x22,0x22,0x3e, // 0x4F 79 O - 0x00,0x3e,0x02,0x0a,0x0a,0x0e, // 0x50 80 P - 0x00,0x3e,0x22,0x22,0x22,0x3e, // 0x51 81 Q - 0x00,0x3e,0x02,0x0a,0x0e,0x38, // 0x52 82 R - 0x00,0x0e,0x0a,0x2a,0x2a,0x3a, // 0x53 83 S - 0x00,0x06,0x02,0x3e,0x02,0x06, // 0x54 84 T - 0x00,0x3e,0x20,0x20,0x20,0x3e, // 0x55 85 U - 0x00,0x3e,0x20,0x20,0x3e,0x00, // 0x56 86 V - 0x00,0x3e,0x20,0x3e,0x02,0x3e, // 0x57 87 W - 0x3e,0x3a,0x0e,0x08,0x0e,0x3a, // 0x58 88 X - 0x00,0x0e,0x08,0x08,0x28,0x3e, // 0x59 89 Y - 0x00,0x3a,0x2a,0x2a,0x0a,0x0e, // 0x5A 90 Z - 0x00,0x3e,0x22,0x00,0x00,0x00, // 0x5B 91 [ - 0x00,0x02,0x0c,0x30,0x00,0x00, // 0x5C 92 \ backslash - 0x22,0x3e,0x00,0x00,0x00,0x00, // 0x5D 93 ] - 0x00,0x01,0x00,0x01,0x00,0x00, // 0x5E 94 ^ - 0x00,0x20,0x20,0x20,0x00,0x00, // 0x5F 95 _ - 0x00,0x01,0x00,0x00,0x00,0x00, // 0x60 96 ` - 0x00,0x38,0x28,0x28,0x08,0x38, // 0x61 97 a - 0x00,0x3e,0x20,0x28,0x28,0x38, // 0x62 98 b - 0x00,0x38,0x28,0x28,0x20,0x30, // 0x63 99 c - 0x00,0x38,0x28,0x28,0x20,0x3e, // 0x64 100 d - 0x00,0xf8,0x88,0x28,0x28,0x38, // 0x65 101 e - 0x00,0xf8,0x28,0x28,0x18,0x08, // 0x66 102 f - 0x00,0x38,0x28,0xa8,0x88,0xf8, // 0x67 103 g - 0x00,0x3c,0x08,0x08,0x08,0x38, // 0x68 104 h - 0x00,0x3a,0x00,0x00,0x00,0x00, // 0x69 105 i - 0x80,0xfa,0x00,0x00,0x00,0x00, // 0x6A 106 j - 0x00,0x3e,0x08,0x08,0x38,0x2c, // 0x6B 107 k - 0x00,0x3e,0x20,0x00,0x00,0x00, // 0x6C 108 l - 0x00,0x38,0x08,0x38,0x20,0x38, // 0x6D 109 m - 0x38,0x38,0x08,0x38,0x20,0x38, // 0x6E 110 n - 0x00,0x38,0x28,0x28,0x28,0x38, // 0x6F 111 o - 0x00,0xf8,0x08,0x28,0x28,0x38, // 0x70 112 p - 0x00,0x38,0x28,0x28,0x08,0xf8, // 0x71 113 q - 0x00,0x38,0x08,0x08,0x18,0x08, // 0x72 114 r - 0x00,0x38,0x28,0xa8,0xa8,0xe8, // 0x73 115 s - 0x00,0x3e,0x28,0x28,0x20,0x30, // 0x74 116 t - 0x00,0x38,0x20,0x20,0x20,0x38, // 0x75 117 u - 0x00,0x38,0x20,0x38,0x00,0x00, // 0x76 118 v - 0x00,0x38,0x20,0x38,0x08,0x38, // 0x77 119 w - 0x38,0x28,0x38,0x10,0x38,0x28, // 0x78 120 x - 0x00,0x38,0x20,0xa0,0xa0,0xf8, // 0x79 121 y - 0x00,0xe8,0xa8,0xa8,0x28,0x38, // 0x7A 122 z - 0x08,0x3e,0x22,0x00,0x00,0x00, // 0x7B 123 { - 0x00,0x3f,0x00,0x00,0x00,0x00, // 0x7C 124 | - 0x22,0x3e,0x08,0x00,0x00,0x00, // 0x7D 125 } - 0x00,0x00,0x00,0x00,0x00,0x00, // 0x7E 126 ~ - 0x00,0x00,0x00,0x00,0x00,0x00, // 0x7F 127 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x2e, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x02, 0x00, 0x02, 0x00, 0x00, + 0x00, 0x0a, 0x1e, 0x0a, 0x1e, 0x00, + 0x00, 0x0e, 0x2a, 0x6b, 0x2a, 0x3a, + 0x00, 0x06, 0x06, 0x26, 0x18, 0x06, + 0x38, 0x3e, 0x2a, 0x2a, 0x28, 0x38, + 0x18, 0x02, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x3e, 0x22, 0x00, 0x00, 0x00, + 0x00, 0x22, 0x3e, 0x00, 0x00, 0x00, + 0x00, 0x0e, 0x0e, 0x0e, 0x04, 0x00, + 0x00, 0x08, 0x1c, 0x08, 0x00, 0x00, + 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x08, 0x08, 0x08, 0x00, 0x00, + 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x20, 0x18, 0x06, 0x00, 0x00, + 0x00, 0x3e, 0x22, 0x2a, 0x22, 0x3e, + 0x02, 0x3e, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x38, 0x28, 0x2a, 0x2a, 0x2e, + 0x00, 0x22, 0x2a, 0x2e, 0x38, 0x00, + 0x00, 0x0e, 0x08, 0x08, 0x3e, 0x08, + 0x00, 0x2e, 0x2a, 0x2a, 0x28, 0x38, + 0x00, 0x3e, 0x2a, 0x2a, 0x28, 0x38, + 0x00, 0x06, 0x02, 0x02, 0x0a, 0x3e, + 0x00, 0x38, 0x2e, 0x2a, 0x2e, 0x38, + 0x00, 0x0e, 0x0a, 0x2a, 0x2a, 0x3e, + 0x00, 0x28, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x28, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x08, 0x14, 0x22, 0x00, 0x00, + 0x00, 0x14, 0x14, 0x14, 0x14, 0x00, + 0x00, 0x22, 0x14, 0x08, 0x00, 0x00, + 0x00, 0x06, 0x02, 0x2a, 0x0a, 0x06, + 0x00, 0x3e, 0x02, 0x3a, 0x2a, 0x0a, + 0x22, 0x3e, 0x02, 0x0a, 0x0a, 0x3e, + 0x00, 0x3e, 0x22, 0x2a, 0x2e, 0x38, + 0x00, 0x3e, 0x22, 0x22, 0x20, 0x30, + 0x00, 0x3e, 0x22, 0x22, 0x22, 0x3c, + 0x00, 0x3e, 0x2a, 0x22, 0x20, 0x30, + 0x00, 0x3e, 0x0a, 0x0a, 0x06, 0x02, + 0x00, 0x3e, 0x22, 0x2a, 0x28, 0x38, + 0x00, 0x3e, 0x08, 0x08, 0x08, 0x3e, + 0x00, 0x22, 0x3e, 0x22, 0x00, 0x00, + 0x00, 0x30, 0x20, 0x20, 0x22, 0x3e, + 0x00, 0x3e, 0x08, 0x08, 0x0e, 0x38, + 0x00, 0x3e, 0x20, 0x20, 0x20, 0x30, + 0x00, 0x3e, 0x02, 0x3e, 0x20, 0x3e, + 0x3e, 0x3e, 0x02, 0x3e, 0x20, 0x3e, + 0x00, 0x3e, 0x22, 0x22, 0x22, 0x3e, + 0x00, 0x3e, 0x02, 0x0a, 0x0a, 0x0e, + 0x00, 0x3e, 0x22, 0x22, 0x22, 0x3e, + 0x00, 0x3e, 0x02, 0x0a, 0x0e, 0x38, + 0x00, 0x0e, 0x0a, 0x2a, 0x2a, 0x3a, + 0x00, 0x06, 0x02, 0x3e, 0x02, 0x06, + 0x00, 0x3e, 0x20, 0x20, 0x20, 0x3e, + 0x00, 0x3e, 0x20, 0x20, 0x3e, 0x00, + 0x00, 0x3e, 0x20, 0x3e, 0x02, 0x3e, + 0x3e, 0x3a, 0x0e, 0x08, 0x0e, 0x3a, + 0x00, 0x0e, 0x08, 0x08, 0x28, 0x3e, + 0x00, 0x3a, 0x2a, 0x2a, 0x0a, 0x0e, + 0x00, 0x3e, 0x22, 0x00, 0x00, 0x00, + 0x00, 0x02, 0x0c, 0x30, 0x00, 0x00, + 0x22, 0x3e, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x01, 0x00, 0x01, 0x00, 0x00, + 0x00, 0x20, 0x20, 0x20, 0x00, 0x00, + 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x38, 0x28, 0x28, 0x08, 0x38, + 0x00, 0x3e, 0x20, 0x28, 0x28, 0x38, + 0x00, 0x38, 0x28, 0x28, 0x20, 0x30, + 0x00, 0x38, 0x28, 0x28, 0x20, 0x3e, + 0x00, 0xf8, 0x88, 0x28, 0x28, 0x38, + 0x00, 0xf8, 0x28, 0x28, 0x18, 0x08, + 0x00, 0x38, 0x28, 0xa8, 0x88, 0xf8, + 0x00, 0x3c, 0x08, 0x08, 0x08, 0x38, + 0x00, 0x3a, 0x00, 0x00, 0x00, 0x00, + 0x80, 0xfa, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x3e, 0x08, 0x08, 0x38, 0x2c, + 0x00, 0x3e, 0x20, 0x00, 0x00, 0x00, + 0x00, 0x38, 0x08, 0x38, 0x20, 0x38, + 0x38, 0x38, 0x08, 0x38, 0x20, 0x38, + 0x00, 0x38, 0x28, 0x28, 0x28, 0x38, + 0x00, 0xf8, 0x08, 0x28, 0x28, 0x38, + 0x00, 0x38, 0x28, 0x28, 0x08, 0xf8, + 0x00, 0x38, 0x08, 0x08, 0x18, 0x08, + 0x00, 0x38, 0x28, 0xa8, 0xa8, 0xe8, + 0x00, 0x3e, 0x28, 0x28, 0x20, 0x30, + 0x00, 0x38, 0x20, 0x20, 0x20, 0x38, + 0x00, 0x38, 0x20, 0x38, 0x00, 0x00, + 0x00, 0x38, 0x20, 0x38, 0x08, 0x38, + 0x38, 0x28, 0x38, 0x10, 0x38, 0x28, + 0x00, 0x38, 0x20, 0xa0, 0xa0, 0xf8, + 0x00, 0xe8, 0xa8, 0xa8, 0x28, 0x38, + 0x08, 0x3e, 0x22, 0x00, 0x00, 0x00, + 0x00, 0x3f, 0x00, 0x00, 0x00, 0x00, + 0x22, 0x3e, 0x08, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # elif defined(OLED_FONT_BMPLAIN) - 0x00,0x00,0x00,0x00,0x00,0x00, // 0x20 32 - 0x2e,0x00,0x00,0x00,0x00,0x00, // 0x21 33 ! - 0x03,0x00,0x03,0x00,0x00,0x00, // 0x22 34 " - 0x0a,0x1f,0x0a,0x1f,0x0a,0x00, // 0x23 35 # - 0x2e,0x2a,0x6b,0x2a,0x3a,0x00, // 0x24 36 $ - 0x0e,0x2a,0x1e,0x08,0x3c,0x2a, // 0x25 37 % - 0x3e,0x2a,0x2a,0x22,0x38,0x08, // 0x26 38 & - 0x03,0x00,0x00,0x00,0x00,0x00, // 0x27 39 ' - 0x1c,0x22,0x00,0x00,0x00,0x00, // 0x28 40 ( - 0x22,0x1c,0x00,0x00,0x00,0x00, // 0x29 41 ) - 0x15,0x0e,0x04,0x0e,0x15,0x00, // 0x2A 42 * - 0x08,0x08,0x3e,0x08,0x08,0x00, // 0x2B 43 + - 0x60,0x00,0x00,0x00,0x00,0x00, // 0x2C 44 , - 0x08,0x08,0x08,0x08,0x08,0x00, // 0x2D 45 - - 0x20,0x00,0x00,0x00,0x00,0x00, // 0x2E 46 . - 0x20,0x10,0x08,0x04,0x02,0x00, // 0x2F 47 / - 0x3e,0x22,0x2a,0x22,0x3e,0x00, // 0x30 48 0 - 0x04,0x3e,0x00,0x00,0x00,0x00, // 0x31 49 1 - 0x3a,0x2a,0x2a,0x2a,0x2e,0x00, // 0x32 50 2 - 0x2a,0x2a,0x2a,0x2a,0x3e,0x00, // 0x33 51 3 - 0x0e,0x08,0x08,0x08,0x3e,0x00, // 0x34 52 4 - 0x2e,0x2a,0x2a,0x2a,0x3a,0x00, // 0x35 53 5 - 0x3e,0x2a,0x2a,0x2a,0x3a,0x00, // 0x36 54 6 - 0x02,0x02,0x02,0x02,0x3e,0x00, // 0x37 55 7 - 0x3e,0x2a,0x2a,0x2a,0x3e,0x00, // 0x38 56 8 - 0x2e,0x2a,0x2a,0x2a,0x3e,0x00, // 0x39 57 9 - 0x14,0x00,0x00,0x00,0x00,0x00, // 0x3A 58 : - 0x34,0x00,0x00,0x00,0x00,0x00, // 0x3B 59 ; - 0x08,0x14,0x22,0x00,0x00,0x00, // 0x3C 60 < - 0x14,0x14,0x14,0x14,0x14,0x00, // 0x3D 61 = - 0x22,0x14,0x08,0x00,0x00,0x00, // 0x3E 62 > - 0x06,0x02,0x2a,0x0a,0x0e,0x00, // 0x3F 63 ? - 0x3e,0x02,0x3a,0x2a,0x3e,0x00, // 0x40 64 @ - 0x3e,0x12,0x12,0x12,0x3e,0x00, // 0x41 65 A - 0x3e,0x2a,0x2a,0x2a,0x36,0x00, // 0x42 66 B - 0x3e,0x22,0x22,0x22,0x22,0x00, // 0x43 67 C - 0x3e,0x22,0x22,0x22,0x1c,0x00, // 0x44 68 D - 0x3e,0x2a,0x2a,0x2a,0x22,0x00, // 0x45 69 E - 0x3e,0x0a,0x0a,0x0a,0x02,0x00, // 0x46 70 F - 0x3e,0x22,0x2a,0x2a,0x3a,0x00, // 0x47 71 G - 0x3e,0x08,0x08,0x08,0x3e,0x00, // 0x48 72 H - 0x22,0x3e,0x22,0x00,0x00,0x00, // 0x49 73 I - 0x38,0x20,0x20,0x20,0x3e,0x00, // 0x4A 74 J - 0x3e,0x08,0x08,0x14,0x22,0x00, // 0x4B 75 K - 0x3e,0x20,0x20,0x20,0x20,0x00, // 0x4C 76 L - 0x3e,0x04,0x38,0x04,0x3e,0x00, // 0x4D 77 M - 0x3e,0x04,0x08,0x10,0x3e,0x00, // 0x4E 78 N - 0x3e,0x22,0x22,0x22,0x3e,0x00, // 0x4F 79 O - 0x3e,0x0a,0x0a,0x0a,0x0e,0x00, // 0x50 80 P - 0x3e,0x22,0x72,0x22,0x3e,0x00, // 0x51 81 Q - 0x3e,0x0a,0x0a,0x1a,0x2e,0x00, // 0x52 82 R - 0x2e,0x2a,0x2a,0x2a,0x3a,0x00, // 0x53 83 S - 0x02,0x02,0x3e,0x02,0x02,0x00, // 0x54 84 T - 0x1e,0x20,0x20,0x20,0x1e,0x00, // 0x55 85 U - 0x0e,0x10,0x20,0x10,0x0e,0x00, // 0x56 86 V - 0x3e,0x10,0x0e,0x10,0x3e,0x00, // 0x57 87 W - 0x22,0x14,0x08,0x14,0x22,0x00, // 0x58 88 X - 0x02,0x04,0x38,0x04,0x02,0x00, // 0x59 89 Y - 0x3a,0x2a,0x2a,0x2a,0x2e,0x00, // 0x5A 90 Z - 0x3e,0x22,0x00,0x00,0x00,0x00, // 0x5B 91 [ - 0x3f,0x21,0x3f,0x00,0x00,0x00, // 0x5C 92 \ backslash - 0x22,0x3e,0x00,0x00,0x00,0x00, // 0x5D 93 ] - 0x0c,0x1e,0x3c,0x1e,0x0c,0x00, // 0x5E 94 ^ - 0x20,0x20,0x20,0x20,0x20,0x00, // 0x5F 95 _ - 0x1c,0x3e,0x3e,0x3e,0x1c,0x00, // 0x60 96 ` - 0x3c,0x24,0x24,0x24,0x3c,0x20, // 0x61 97 a - 0x3e,0x24,0x24,0x24,0x3c,0x00, // 0x62 98 b - 0x3c,0x24,0x24,0x24,0x24,0x00, // 0x63 99 c - 0x3c,0x24,0x24,0x24,0x3e,0x00, // 0x64 100 d - 0x3c,0x24,0x34,0x2c,0x24,0x00, // 0x65 101 e - 0x08,0x3e,0x0a,0x0a,0x00,0x00, // 0x66 102 f - 0x1c,0x54,0x54,0x54,0x7c,0x00, // 0x67 103 g - 0x3e,0x04,0x04,0x04,0x3c,0x00, // 0x68 104 h - 0x3a,0x00,0x00,0x00,0x00,0x00, // 0x69 105 i - 0x7a,0x00,0x00,0x00,0x00,0x00, // 0x6A 106 j - 0x3e,0x08,0x14,0x22,0x00,0x00, // 0x6B 107 k - 0x02,0x3e,0x00,0x00,0x00,0x00, // 0x6C 108 l - 0x3c,0x04,0x3c,0x04,0x3c,0x00, // 0x6D 109 m - 0x3c,0x04,0x04,0x04,0x3c,0x00, // 0x6E 110 n - 0x3c,0x24,0x24,0x24,0x3c,0x00, // 0x6F 111 o - 0x7c,0x24,0x24,0x24,0x3c,0x00, // 0x70 112 p - 0x3c,0x24,0x24,0x24,0x7c,0x00, // 0x71 113 q - 0x3c,0x04,0x04,0x04,0x00,0x00, // 0x72 114 r - 0x24,0x2c,0x34,0x24,0x00,0x00, // 0x73 115 s - 0x04,0x3e,0x24,0x24,0x00,0x00, // 0x74 116 t - 0x3c,0x20,0x20,0x20,0x3c,0x00, // 0x75 117 u - 0x0c,0x10,0x20,0x10,0x0c,0x00, // 0x76 118 v - 0x3c,0x20,0x3c,0x20,0x3c,0x00, // 0x77 119 w - 0x24,0x24,0x18,0x24,0x24,0x00, // 0x78 120 x - 0x1c,0x50,0x50,0x50,0x7c,0x00, // 0x79 121 y - 0x24,0x34,0x2c,0x24,0x00,0x00, // 0x7A 122 z - 0x08,0x3e,0x22,0x00,0x00,0x00, // 0x7B 123 { - 0x1c,0x22,0x22,0x22,0x1c,0x00, // 0x7C 124 | - 0x22,0x3e,0x08,0x00,0x00,0x00, // 0x7D 125 } - 0x01,0x01,0x01,0x00,0x00,0x00, // 0x7E 126 ~ - 0x00,0x00,0x00,0x00,0x00,0x00, // 0x7F 127 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x2e, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x03, 0x00, 0x03, 0x00, 0x00, 0x00, + 0x0a, 0x1f, 0x0a, 0x1f, 0x0a, 0x00, + 0x2e, 0x2a, 0x6b, 0x2a, 0x3a, 0x00, + 0x0e, 0x2a, 0x1e, 0x08, 0x3c, 0x2a, + 0x3e, 0x2a, 0x2a, 0x22, 0x38, 0x08, + 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x1c, 0x22, 0x00, 0x00, 0x00, 0x00, + 0x22, 0x1c, 0x00, 0x00, 0x00, 0x00, + 0x15, 0x0e, 0x04, 0x0e, 0x15, 0x00, + 0x08, 0x08, 0x3e, 0x08, 0x08, 0x00, + 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, + 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x20, 0x10, 0x08, 0x04, 0x02, 0x00, + 0x3e, 0x22, 0x2a, 0x22, 0x3e, 0x00, + 0x04, 0x3e, 0x00, 0x00, 0x00, 0x00, + 0x3a, 0x2a, 0x2a, 0x2a, 0x2e, 0x00, + 0x2a, 0x2a, 0x2a, 0x2a, 0x3e, 0x00, + 0x0e, 0x08, 0x08, 0x08, 0x3e, 0x00, + 0x2e, 0x2a, 0x2a, 0x2a, 0x3a, 0x00, + 0x3e, 0x2a, 0x2a, 0x2a, 0x3a, 0x00, + 0x02, 0x02, 0x02, 0x02, 0x3e, 0x00, + 0x3e, 0x2a, 0x2a, 0x2a, 0x3e, 0x00, + 0x2e, 0x2a, 0x2a, 0x2a, 0x3e, 0x00, + 0x14, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x34, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x08, 0x14, 0x22, 0x00, 0x00, 0x00, + 0x14, 0x14, 0x14, 0x14, 0x14, 0x00, + 0x22, 0x14, 0x08, 0x00, 0x00, 0x00, + 0x06, 0x02, 0x2a, 0x0a, 0x0e, 0x00, + 0x3e, 0x02, 0x3a, 0x2a, 0x3e, 0x00, + 0x3e, 0x12, 0x12, 0x12, 0x3e, 0x00, + 0x3e, 0x2a, 0x2a, 0x2a, 0x36, 0x00, + 0x3e, 0x22, 0x22, 0x22, 0x22, 0x00, + 0x3e, 0x22, 0x22, 0x22, 0x1c, 0x00, + 0x3e, 0x2a, 0x2a, 0x2a, 0x22, 0x00, + 0x3e, 0x0a, 0x0a, 0x0a, 0x02, 0x00, + 0x3e, 0x22, 0x2a, 0x2a, 0x3a, 0x00, + 0x3e, 0x08, 0x08, 0x08, 0x3e, 0x00, + 0x22, 0x3e, 0x22, 0x00, 0x00, 0x00, + 0x38, 0x20, 0x20, 0x20, 0x3e, 0x00, + 0x3e, 0x08, 0x08, 0x14, 0x22, 0x00, + 0x3e, 0x20, 0x20, 0x20, 0x20, 0x00, + 0x3e, 0x04, 0x38, 0x04, 0x3e, 0x00, + 0x3e, 0x04, 0x08, 0x10, 0x3e, 0x00, + 0x3e, 0x22, 0x22, 0x22, 0x3e, 0x00, + 0x3e, 0x0a, 0x0a, 0x0a, 0x0e, 0x00, + 0x3e, 0x22, 0x72, 0x22, 0x3e, 0x00, + 0x3e, 0x0a, 0x0a, 0x1a, 0x2e, 0x00, + 0x2e, 0x2a, 0x2a, 0x2a, 0x3a, 0x00, + 0x02, 0x02, 0x3e, 0x02, 0x02, 0x00, + 0x1e, 0x20, 0x20, 0x20, 0x1e, 0x00, + 0x0e, 0x10, 0x20, 0x10, 0x0e, 0x00, + 0x3e, 0x10, 0x0e, 0x10, 0x3e, 0x00, + 0x22, 0x14, 0x08, 0x14, 0x22, 0x00, + 0x02, 0x04, 0x38, 0x04, 0x02, 0x00, + 0x3a, 0x2a, 0x2a, 0x2a, 0x2e, 0x00, + 0x3e, 0x22, 0x00, 0x00, 0x00, 0x00, + 0x3f, 0x21, 0x3f, 0x00, 0x00, 0x00, + 0x22, 0x3e, 0x00, 0x00, 0x00, 0x00, + 0x0c, 0x1e, 0x3c, 0x1e, 0x0c, 0x00, + 0x20, 0x20, 0x20, 0x20, 0x20, 0x00, + 0x1c, 0x3e, 0x3e, 0x3e, 0x1c, 0x00, + 0x3c, 0x24, 0x24, 0x24, 0x3c, 0x20, + 0x3e, 0x24, 0x24, 0x24, 0x3c, 0x00, + 0x3c, 0x24, 0x24, 0x24, 0x24, 0x00, + 0x3c, 0x24, 0x24, 0x24, 0x3e, 0x00, + 0x3c, 0x24, 0x34, 0x2c, 0x24, 0x00, + 0x08, 0x3e, 0x0a, 0x0a, 0x00, 0x00, + 0x1c, 0x54, 0x54, 0x54, 0x7c, 0x00, + 0x3e, 0x04, 0x04, 0x04, 0x3c, 0x00, + 0x3a, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x7a, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x3e, 0x08, 0x14, 0x22, 0x00, 0x00, + 0x02, 0x3e, 0x00, 0x00, 0x00, 0x00, + 0x3c, 0x04, 0x3c, 0x04, 0x3c, 0x00, + 0x3c, 0x04, 0x04, 0x04, 0x3c, 0x00, + 0x3c, 0x24, 0x24, 0x24, 0x3c, 0x00, + 0x7c, 0x24, 0x24, 0x24, 0x3c, 0x00, + 0x3c, 0x24, 0x24, 0x24, 0x7c, 0x00, + 0x3c, 0x04, 0x04, 0x04, 0x00, 0x00, + 0x24, 0x2c, 0x34, 0x24, 0x00, 0x00, + 0x04, 0x3e, 0x24, 0x24, 0x00, 0x00, + 0x3c, 0x20, 0x20, 0x20, 0x3c, 0x00, + 0x0c, 0x10, 0x20, 0x10, 0x0c, 0x00, + 0x3c, 0x20, 0x3c, 0x20, 0x3c, 0x00, + 0x24, 0x24, 0x18, 0x24, 0x24, 0x00, + 0x1c, 0x50, 0x50, 0x50, 0x7c, 0x00, + 0x24, 0x34, 0x2c, 0x24, 0x00, 0x00, + 0x08, 0x3e, 0x22, 0x00, 0x00, 0x00, + 0x1c, 0x22, 0x22, 0x22, 0x1c, 0x00, + 0x22, 0x3e, 0x08, 0x00, 0x00, 0x00, + 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # elif defined(OLED_FONT_SUPER_DIGG) - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0x20 32 - 0x58, 0x5C, 0x00, 0x00, 0x00, 0x00, // 0x21 33 ! - 0x00, 0x01, 0x00, 0x00, 0x01, 0x00, // 0x22 34 " - 0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00, // 0x23 35 # - 0x5C, 0xFE, 0x54, 0xFE, 0x74, 0x00, // 0x24 36 $ - 0x03, 0x63, 0x38, 0x0C, 0x63, 0x60, // 0x25 37 % - 0x70, 0x5C, 0x54, 0x74, 0x7C, 0x50, // 0x26 38 & - 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, // 0x27 39 ' - 0x70, 0x7C, 0x44, 0x00, 0x00, 0x00, // 0x28 40 ( - 0x44, 0x7C, 0x70, 0x00, 0x00, 0x00, // 0x29 41 ) - 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00, // 0x2A 42 * - 0x10, 0x10, 0x70, 0x7C, 0x10, 0x00, // 0x2B 43 + - 0x40, 0xC0, 0x00, 0x00, 0x00, 0x00, // 0x2C 44 , - 0x10, 0x10, 0x10, 0x10, 0x00, 0x00, // 0x2D 45 - - 0x40, 0x40, 0x00, 0x00, 0x00, 0x00, // 0x2E 46 . - 0x70, 0x7C, 0x03, 0x00, 0x00, 0x00, // 0x2F 47 / - 0x7C, 0x44, 0x44, 0x44, 0x7C, 0x1C, // 0x30 48 0 - 0x04, 0x04, 0x7C, 0x1C, 0x00, 0x00, // 0x31 49 1 - 0x74, 0x74, 0x54, 0x54, 0x5C, 0x00, // 0x32 50 2 - 0x44, 0x54, 0x54, 0x54, 0x7C, 0x70, // 0x33 51 3 - 0x1C, 0x10, 0x10, 0x7C, 0x7C, 0x00, // 0x34 52 4 - 0x5C, 0x5C, 0x54, 0x54, 0x74, 0x00, // 0x35 53 5 - 0x70, 0x7C, 0x54, 0x54, 0x74, 0x00, // 0x36 54 6 - 0x04, 0x14, 0x14, 0x14, 0x7C, 0x70, // 0x37 55 7 - 0x70, 0x5C, 0x54, 0x74, 0x7C, 0x00, // 0x38 56 8 - 0x5C, 0x54, 0x54, 0x54, 0x7C, 0x1C, // 0x39 57 9 - 0x50, 0x50, 0x00, 0x00, 0x00, 0x00, // 0x3A 58 : - 0x50, 0xD0, 0x00, 0x00, 0x00, 0x00, // 0x3B 59 ; - 0x18, 0x18, 0x24, 0x42, 0x00, 0x00, // 0x3C 60 < - 0x28, 0x28, 0x28, 0x28, 0x00, 0x00, // 0x3D 61 = - 0x42, 0x24, 0x18, 0x18, 0x00, 0x00, // 0x3E 62 > - 0x04, 0x14, 0x54, 0x54, 0x1C, 0x1C, // 0x3F 63 ? - 0xF8, 0x04, 0x74, 0x74, 0x54, 0x54, // 0x40 64 @ - 0x70, 0x7C, 0x14, 0x14, 0x3C, 0x00, // 0x41 65 A - 0x7C, 0x74, 0x54, 0x54, 0x7C, 0x00, // 0x42 66 B - 0x70, 0x7C, 0x44, 0x44, 0x44, 0x44, // 0x43 67 C - 0x70, 0x7C, 0x44, 0x44, 0x48, 0x70, // 0x44 68 D - 0x70, 0x7C, 0x54, 0x54, 0x54, 0x44, // 0x45 69 E - 0x70, 0x7C, 0x14, 0x14, 0x14, 0x04, // 0x46 70 F - 0x70, 0x7C, 0x44, 0x44, 0x54, 0x74, // 0x47 71 G - 0x70, 0x7C, 0x10, 0x10, 0x7C, 0x00, // 0x48 72 H - 0x70, 0x7C, 0x00, 0x00, 0x00, 0x00, // 0x49 73 I - 0x60, 0x40, 0x40, 0x40, 0x7C, 0x70, // 0x4A 74 J - 0x7C, 0x70, 0x10, 0x1C, 0x70, 0x00, // 0x4B 75 K - 0x70, 0x7C, 0x40, 0x40, 0x40, 0x60, // 0x4C 76 L - 0x70, 0x7C, 0x04, 0x04, 0x7C, 0x04, // 0x4D 77 M - 0x70, 0x7C, 0x04, 0x04, 0x04, 0x7C, // 0x4E 78 N - 0x70, 0x7C, 0x44, 0x44, 0x44, 0x7C, // 0x4F 79 O - 0x70, 0x7C, 0x24, 0x24, 0x3C, 0x00, // 0x50 80 P - 0x7C, 0x44, 0x44, 0x44, 0x7C, 0x00, // 0x51 81 Q - 0x7C, 0x74, 0x14, 0x14, 0x3C, 0x00, // 0x52 82 R - 0x5C, 0x5C, 0x54, 0x54, 0x74, 0x00, // 0x53 83 S - 0x04, 0x04, 0x7C, 0x74, 0x04, 0x00, // 0x54 84 T - 0x70, 0x7C, 0x40, 0x40, 0x40, 0x7C, // 0x55 85 U - 0x70, 0x7C, 0x40, 0x40, 0x20, 0x1C, // 0x56 86 V - 0x70, 0x7C, 0x40, 0x40, 0x7C, 0x40, // 0x57 87 W - 0x70, 0x7C, 0x10, 0x10, 0x3C, 0x00, // 0x58 88 X - 0x1C, 0x10, 0x70, 0x70, 0x1C, 0x00, // 0x59 89 Y - 0x74, 0x74, 0x54, 0x54, 0x5C, 0x00, // 0x5A 90 Z - 0xF0, 0xFE, 0x82, 0x00, 0x00, 0x00, // 0x5B 91 [ - 0x03, 0x7C, 0x70, 0x00, 0x00, 0x00, // 0x5C 92 \ backslash - 0x82, 0xFE, 0xF0, 0x00, 0x00, 0x00, // 0x5D 93 ] - 0x04, 0x02, 0x01, 0x06, 0x04, 0x00, // 0x5E 94 ^ - 0x40, 0x40, 0x40, 0x40, 0x00, 0x00, // 0x5F 95 _ - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0x60 96 ` - 0x70, 0x7C, 0x14, 0x14, 0x3C, 0x00, // 0x61 97 a - 0x7C, 0x74, 0x54, 0x54, 0x7C, 0x00, // 0x62 98 b - 0x70, 0x7C, 0x44, 0x44, 0x44, 0x44, // 0x63 99 c - 0x70, 0x7C, 0x44, 0x44, 0x48, 0x70, // 0x64 100 d - 0x70, 0x7C, 0x54, 0x54, 0x54, 0x44, // 0x65 101 e - 0x70, 0x7C, 0x14, 0x14, 0x14, 0x04, // 0x66 102 f - 0x70, 0x7C, 0x44, 0x44, 0x54, 0x74, // 0x67 103 g - 0x70, 0x7C, 0x10, 0x10, 0x7C, 0x00, // 0x68 104 h - 0x70, 0x7C, 0x00, 0x00, 0x00, 0x00, // 0x69 105 i - 0x60, 0x40, 0x40, 0x40, 0x7C, 0x70, // 0x6A 106 j - 0x7C, 0x70, 0x10, 0x1C, 0x70, 0x00, // 0x6B 107 k - 0x70, 0x7C, 0x40, 0x40, 0x40, 0x60, // 0x6C 108 l - 0x70, 0x7C, 0x04, 0x04, 0x7C, 0x04, // 0x6D 109 m - 0x70, 0x7C, 0x04, 0x04, 0x04, 0x7C, // 0x6E 110 n - 0x70, 0x7C, 0x44, 0x44, 0x44, 0x7C, // 0x6F 111 o - 0x70, 0x7C, 0x24, 0x24, 0x3C, 0x00, // 0x70 112 p - 0x7C, 0x44, 0x44, 0x44, 0x7C, 0x00, // 0x71 113 q - 0x7C, 0x74, 0x14, 0x14, 0x3C, 0x00, // 0x72 114 r - 0x5C, 0x5C, 0x54, 0x54, 0x74, 0x00, // 0x73 115 s - 0x04, 0x04, 0x7C, 0x74, 0x04, 0x00, // 0x74 116 t - 0x70, 0x7C, 0x40, 0x40, 0x40, 0x7C, // 0x75 117 u - 0x70, 0x7C, 0x40, 0x40, 0x20, 0x1C, // 0x76 118 v - 0x70, 0x7C, 0x40, 0x40, 0x7C, 0x40, // 0x77 119 w - 0x70, 0x7C, 0x10, 0x10, 0x3C, 0x00, // 0x78 120 x - 0x1C, 0x10, 0x70, 0x70, 0x1C, 0x00, // 0x79 121 y - 0x74, 0x74, 0x54, 0x54, 0x5C, 0x00, // 0x7A 122 z - 0x10, 0xFE, 0xC2, 0x00, 0x00, 0x00, // 0x7B 123 { - 0x00, 0x44, 0x77, 0x00, 0x00, 0x00, // 0x7C 124 | - 0xC2, 0xFE, 0x10, 0x00, 0x00, 0x00, // 0x7D 125 } - 0x02, 0x01, 0x03, 0x04, 0x06, 0x02, // 0x7E 126 ~ - 0x3C, 0x22, 0x21, 0x22, 0x3C, 0x00, // 0x7F 127 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x58, 0x5C, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x01, 0x00, 0x00, 0x01, 0x00, + 0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00, + 0x5C, 0xFE, 0x54, 0xFE, 0x74, 0x00, + 0x03, 0x63, 0x38, 0x0C, 0x63, 0x60, + 0x70, 0x5C, 0x54, 0x74, 0x7C, 0x50, + 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, + 0x70, 0x7C, 0x44, 0x00, 0x00, 0x00, + 0x44, 0x7C, 0x70, 0x00, 0x00, 0x00, + 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00, + 0x10, 0x10, 0x70, 0x7C, 0x10, 0x00, + 0x40, 0xC0, 0x00, 0x00, 0x00, 0x00, + 0x10, 0x10, 0x10, 0x10, 0x00, 0x00, + 0x40, 0x40, 0x00, 0x00, 0x00, 0x00, + 0x70, 0x7C, 0x03, 0x00, 0x00, 0x00, + 0x7C, 0x44, 0x44, 0x44, 0x7C, 0x1C, + 0x04, 0x04, 0x7C, 0x1C, 0x00, 0x00, + 0x74, 0x74, 0x54, 0x54, 0x5C, 0x00, + 0x44, 0x54, 0x54, 0x54, 0x7C, 0x70, + 0x1C, 0x10, 0x10, 0x7C, 0x7C, 0x00, + 0x5C, 0x5C, 0x54, 0x54, 0x74, 0x00, + 0x70, 0x7C, 0x54, 0x54, 0x74, 0x00, + 0x04, 0x14, 0x14, 0x14, 0x7C, 0x70, + 0x70, 0x5C, 0x54, 0x74, 0x7C, 0x00, + 0x5C, 0x54, 0x54, 0x54, 0x7C, 0x1C, + 0x50, 0x50, 0x00, 0x00, 0x00, 0x00, + 0x50, 0xD0, 0x00, 0x00, 0x00, 0x00, + 0x18, 0x18, 0x24, 0x42, 0x00, 0x00, + 0x28, 0x28, 0x28, 0x28, 0x00, 0x00, + 0x42, 0x24, 0x18, 0x18, 0x00, 0x00, + 0x04, 0x14, 0x54, 0x54, 0x1C, 0x1C, + 0xF8, 0x04, 0x74, 0x74, 0x54, 0x54, + 0x70, 0x7C, 0x14, 0x14, 0x3C, 0x00, + 0x7C, 0x74, 0x54, 0x54, 0x7C, 0x00, + 0x70, 0x7C, 0x44, 0x44, 0x44, 0x44, + 0x70, 0x7C, 0x44, 0x44, 0x48, 0x70, + 0x70, 0x7C, 0x54, 0x54, 0x54, 0x44, + 0x70, 0x7C, 0x14, 0x14, 0x14, 0x04, + 0x70, 0x7C, 0x44, 0x44, 0x54, 0x74, + 0x70, 0x7C, 0x10, 0x10, 0x7C, 0x00, + 0x70, 0x7C, 0x00, 0x00, 0x00, 0x00, + 0x60, 0x40, 0x40, 0x40, 0x7C, 0x70, + 0x7C, 0x70, 0x10, 0x1C, 0x70, 0x00, + 0x70, 0x7C, 0x40, 0x40, 0x40, 0x60, + 0x70, 0x7C, 0x04, 0x04, 0x7C, 0x04, + 0x70, 0x7C, 0x04, 0x04, 0x04, 0x7C, + 0x70, 0x7C, 0x44, 0x44, 0x44, 0x7C, + 0x70, 0x7C, 0x24, 0x24, 0x3C, 0x00, + 0x7C, 0x44, 0x44, 0x44, 0x7C, 0x00, + 0x7C, 0x74, 0x14, 0x14, 0x3C, 0x00, + 0x5C, 0x5C, 0x54, 0x54, 0x74, 0x00, + 0x04, 0x04, 0x7C, 0x74, 0x04, 0x00, + 0x70, 0x7C, 0x40, 0x40, 0x40, 0x7C, + 0x70, 0x7C, 0x40, 0x40, 0x20, 0x1C, + 0x70, 0x7C, 0x40, 0x40, 0x7C, 0x40, + 0x70, 0x7C, 0x10, 0x10, 0x3C, 0x00, + 0x1C, 0x10, 0x70, 0x70, 0x1C, 0x00, + 0x74, 0x74, 0x54, 0x54, 0x5C, 0x00, + 0xF0, 0xFE, 0x82, 0x00, 0x00, 0x00, + 0x03, 0x7C, 0x70, 0x00, 0x00, 0x00, + 0x82, 0xFE, 0xF0, 0x00, 0x00, 0x00, + 0x04, 0x02, 0x01, 0x06, 0x04, 0x00, + 0x40, 0x40, 0x40, 0x40, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x70, 0x7C, 0x14, 0x14, 0x3C, 0x00, + 0x7C, 0x74, 0x54, 0x54, 0x7C, 0x00, + 0x70, 0x7C, 0x44, 0x44, 0x44, 0x44, + 0x70, 0x7C, 0x44, 0x44, 0x48, 0x70, + 0x70, 0x7C, 0x54, 0x54, 0x54, 0x44, + 0x70, 0x7C, 0x14, 0x14, 0x14, 0x04, + 0x70, 0x7C, 0x44, 0x44, 0x54, 0x74, + 0x70, 0x7C, 0x10, 0x10, 0x7C, 0x00, + 0x70, 0x7C, 0x00, 0x00, 0x00, 0x00, + 0x60, 0x40, 0x40, 0x40, 0x7C, 0x70, + 0x7C, 0x70, 0x10, 0x1C, 0x70, 0x00, + 0x70, 0x7C, 0x40, 0x40, 0x40, 0x60, + 0x70, 0x7C, 0x04, 0x04, 0x7C, 0x04, + 0x70, 0x7C, 0x04, 0x04, 0x04, 0x7C, + 0x70, 0x7C, 0x44, 0x44, 0x44, 0x7C, + 0x70, 0x7C, 0x24, 0x24, 0x3C, 0x00, + 0x7C, 0x44, 0x44, 0x44, 0x7C, 0x00, + 0x7C, 0x74, 0x14, 0x14, 0x3C, 0x00, + 0x5C, 0x5C, 0x54, 0x54, 0x74, 0x00, + 0x04, 0x04, 0x7C, 0x74, 0x04, 0x00, + 0x70, 0x7C, 0x40, 0x40, 0x40, 0x7C, + 0x70, 0x7C, 0x40, 0x40, 0x20, 0x1C, + 0x70, 0x7C, 0x40, 0x40, 0x7C, 0x40, + 0x70, 0x7C, 0x10, 0x10, 0x3C, 0x00, + 0x1C, 0x10, 0x70, 0x70, 0x1C, 0x00, + 0x74, 0x74, 0x54, 0x54, 0x5C, 0x00, + 0x10, 0xFE, 0xC2, 0x00, 0x00, 0x00, + 0x00, 0x44, 0x77, 0x00, 0x00, 0x00, + 0xC2, 0xFE, 0x10, 0x00, 0x00, 0x00, + 0x02, 0x01, 0x03, 0x04, 0x06, 0x02, + 0x3C, 0x22, 0x21, 0x22, 0x3C, 0x00, # else // default font - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0x20 32 - 0x00, 0x00, 0x5F, 0x00, 0x00, 0x00, // 0x21 33 ! - 0x00, 0x07, 0x00, 0x07, 0x00, 0x00, // 0x22 34 " - 0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00, // 0x23 35 # - 0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00, // 0x24 36 $ - 0x23, 0x13, 0x08, 0x64, 0x62, 0x00, // 0x25 37 % - 0x36, 0x49, 0x56, 0x20, 0x50, 0x00, // 0x26 38 & - 0x00, 0x08, 0x07, 0x03, 0x00, 0x00, // 0x27 39 ' - 0x00, 0x1C, 0x22, 0x41, 0x00, 0x00, // 0x28 40 ( - 0x00, 0x41, 0x22, 0x1C, 0x00, 0x00, // 0x29 41 ) - 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00, // 0x2A 42 * - 0x08, 0x08, 0x3E, 0x08, 0x08, 0x00, // 0x2B 43 + - 0x00, 0x80, 0x70, 0x30, 0x00, 0x00, // 0x2C 44 , - 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, // 0x2D 45 - - 0x00, 0x00, 0x60, 0x60, 0x00, 0x00, // 0x2E 46 . - 0x20, 0x10, 0x08, 0x04, 0x02, 0x00, // 0x2F 47 / - 0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00, // 0x30 48 0 - 0x00, 0x42, 0x7F, 0x40, 0x00, 0x00, // 0x31 49 1 - 0x72, 0x49, 0x49, 0x49, 0x46, 0x00, // 0x32 50 2 - 0x21, 0x41, 0x49, 0x4D, 0x33, 0x00, // 0x33 51 3 - 0x18, 0x14, 0x12, 0x7F, 0x10, 0x00, // 0x34 52 4 - 0x27, 0x45, 0x45, 0x45, 0x39, 0x00, // 0x35 53 5 - 0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00, // 0x36 54 6 - 0x41, 0x21, 0x11, 0x09, 0x07, 0x00, // 0x37 55 7 - 0x36, 0x49, 0x49, 0x49, 0x36, 0x00, // 0x38 56 8 - 0x46, 0x49, 0x49, 0x29, 0x1E, 0x00, // 0x39 57 9 - 0x00, 0x00, 0x14, 0x00, 0x00, 0x00, // 0x3A 58 : - 0x00, 0x40, 0x34, 0x00, 0x00, 0x00, // 0x3B 59 ; - 0x00, 0x08, 0x14, 0x22, 0x41, 0x00, // 0x3C 60 < - 0x14, 0x14, 0x14, 0x14, 0x14, 0x00, // 0x3D 61 = - 0x00, 0x41, 0x22, 0x14, 0x08, 0x00, // 0x3E 62 > - 0x02, 0x01, 0x59, 0x09, 0x06, 0x00, // 0x3F 63 ? - 0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00, // 0x40 64 @ - 0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00, // 0x41 65 A - 0x7F, 0x49, 0x49, 0x49, 0x36, 0x00, // 0x42 66 B - 0x3E, 0x41, 0x41, 0x41, 0x22, 0x00, // 0x43 67 C - 0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00, // 0x44 68 D - 0x7F, 0x49, 0x49, 0x49, 0x41, 0x00, // 0x45 69 E - 0x7F, 0x09, 0x09, 0x09, 0x01, 0x00, // 0x46 70 F - 0x3E, 0x41, 0x41, 0x51, 0x73, 0x00, // 0x47 71 G - 0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00, // 0x48 72 H - 0x00, 0x41, 0x7F, 0x41, 0x00, 0x00, // 0x49 73 I - 0x20, 0x40, 0x41, 0x3F, 0x01, 0x00, // 0x4A 74 J - 0x7F, 0x08, 0x14, 0x22, 0x41, 0x00, // 0x4B 75 K - 0x7F, 0x40, 0x40, 0x40, 0x40, 0x00, // 0x4C 76 L - 0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00, // 0x4D 77 M - 0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00, // 0x4E 78 N - 0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00, // 0x4F 79 O - 0x7F, 0x09, 0x09, 0x09, 0x06, 0x00, // 0x50 80 P - 0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00, // 0x51 81 Q - 0x7F, 0x09, 0x19, 0x29, 0x46, 0x00, // 0x52 82 R - 0x26, 0x49, 0x49, 0x49, 0x32, 0x00, // 0x53 83 S - 0x03, 0x01, 0x7F, 0x01, 0x03, 0x00, // 0x54 84 T - 0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00, // 0x55 85 U - 0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00, // 0x56 86 V - 0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00, // 0x57 87 W - 0x63, 0x14, 0x08, 0x14, 0x63, 0x00, // 0x58 88 X - 0x03, 0x04, 0x78, 0x04, 0x03, 0x00, // 0x59 89 Y - 0x61, 0x59, 0x49, 0x4D, 0x43, 0x00, // 0x5A 90 Z - 0x00, 0x7F, 0x41, 0x41, 0x41, 0x00, // 0x5B 91 [ - 0x02, 0x04, 0x08, 0x10, 0x20, 0x00, // 0x5C 92 \ backslash - 0x00, 0x41, 0x41, 0x41, 0x7F, 0x00, // 0x5D 93 ] - 0x04, 0x02, 0x01, 0x02, 0x04, 0x00, // 0x5E 94 ^ - 0x40, 0x40, 0x40, 0x40, 0x40, 0x00, // 0x5F 95 _ - 0x00, 0x03, 0x07, 0x08, 0x00, 0x00, // 0x60 96 ` - 0x20, 0x54, 0x54, 0x78, 0x40, 0x00, // 0x61 97 a - 0x7F, 0x28, 0x44, 0x44, 0x38, 0x00, // 0x62 98 b - 0x38, 0x44, 0x44, 0x44, 0x28, 0x00, // 0x63 99 c - 0x38, 0x44, 0x44, 0x28, 0x7F, 0x00, // 0x64 100 d - 0x38, 0x54, 0x54, 0x54, 0x18, 0x00, // 0x65 101 e - 0x00, 0x08, 0x7E, 0x09, 0x02, 0x00, // 0x66 102 f - 0x18, 0x24, 0x24, 0x1C, 0x78, 0x00, // 0x67 103 g - 0x7F, 0x08, 0x04, 0x04, 0x78, 0x00, // 0x68 104 h - 0x00, 0x44, 0x7D, 0x40, 0x00, 0x00, // 0x69 105 i - 0x20, 0x40, 0x40, 0x3D, 0x00, 0x00, // 0x6A 106 j - 0x7F, 0x10, 0x28, 0x44, 0x00, 0x00, // 0x6B 107 k - 0x00, 0x41, 0x7F, 0x40, 0x00, 0x00, // 0x6C 108 l - 0x7C, 0x04, 0x78, 0x04, 0x78, 0x00, // 0x6D 109 m - 0x7C, 0x08, 0x04, 0x04, 0x78, 0x00, // 0x6E 110 n - 0x38, 0x44, 0x44, 0x44, 0x38, 0x00, // 0x6F 111 o - 0x7C, 0x18, 0x24, 0x24, 0x18, 0x00, // 0x70 112 p - 0x18, 0x24, 0x24, 0x18, 0x7C, 0x00, // 0x71 113 q - 0x7C, 0x08, 0x04, 0x04, 0x08, 0x00, // 0x72 114 r - 0x48, 0x54, 0x54, 0x54, 0x24, 0x00, // 0x73 115 s - 0x04, 0x04, 0x3F, 0x44, 0x24, 0x00, // 0x74 116 t - 0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00, // 0x75 117 u - 0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00, // 0x76 118 v - 0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00, // 0x77 119 w - 0x44, 0x28, 0x10, 0x28, 0x44, 0x00, // 0x78 120 x - 0x4C, 0x90, 0x10, 0x90, 0x7C, 0x00, // 0x79 121 y - 0x44, 0x64, 0x54, 0x4C, 0x44, 0x00, // 0x7A 122 z - 0x00, 0x08, 0x36, 0x41, 0x00, 0x00, // 0x7B 123 { - 0x00, 0x00, 0x77, 0x00, 0x00, 0x00, // 0x7C 124 | - 0x00, 0x41, 0x36, 0x08, 0x00, 0x00, // 0x7D 125 } - 0x02, 0x01, 0x02, 0x04, 0x02, 0x00, // 0x7E 126 ~ - 0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00, // 0x7F 127 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x5F, 0x00, 0x00, 0x00, + 0x00, 0x07, 0x00, 0x07, 0x00, 0x00, + 0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00, + 0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00, + 0x23, 0x13, 0x08, 0x64, 0x62, 0x00, + 0x36, 0x49, 0x56, 0x20, 0x50, 0x00, + 0x00, 0x08, 0x07, 0x03, 0x00, 0x00, + 0x00, 0x1C, 0x22, 0x41, 0x00, 0x00, + 0x00, 0x41, 0x22, 0x1C, 0x00, 0x00, + 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00, + 0x08, 0x08, 0x3E, 0x08, 0x08, 0x00, + 0x00, 0x80, 0x70, 0x30, 0x00, 0x00, + 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, + 0x00, 0x00, 0x60, 0x60, 0x00, 0x00, + 0x20, 0x10, 0x08, 0x04, 0x02, 0x00, + 0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00, + 0x00, 0x42, 0x7F, 0x40, 0x00, 0x00, + 0x72, 0x49, 0x49, 0x49, 0x46, 0x00, + 0x21, 0x41, 0x49, 0x4D, 0x33, 0x00, + 0x18, 0x14, 0x12, 0x7F, 0x10, 0x00, + 0x27, 0x45, 0x45, 0x45, 0x39, 0x00, + 0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00, + 0x41, 0x21, 0x11, 0x09, 0x07, 0x00, + 0x36, 0x49, 0x49, 0x49, 0x36, 0x00, + 0x46, 0x49, 0x49, 0x29, 0x1E, 0x00, + 0x00, 0x00, 0x14, 0x00, 0x00, 0x00, + 0x00, 0x40, 0x34, 0x00, 0x00, 0x00, + 0x00, 0x08, 0x14, 0x22, 0x41, 0x00, + 0x14, 0x14, 0x14, 0x14, 0x14, 0x00, + 0x00, 0x41, 0x22, 0x14, 0x08, 0x00, + 0x02, 0x01, 0x59, 0x09, 0x06, 0x00, + 0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00, + 0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00, + 0x7F, 0x49, 0x49, 0x49, 0x36, 0x00, + 0x3E, 0x41, 0x41, 0x41, 0x22, 0x00, + 0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00, + 0x7F, 0x49, 0x49, 0x49, 0x41, 0x00, + 0x7F, 0x09, 0x09, 0x09, 0x01, 0x00, + 0x3E, 0x41, 0x41, 0x51, 0x73, 0x00, + 0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00, + 0x00, 0x41, 0x7F, 0x41, 0x00, 0x00, + 0x20, 0x40, 0x41, 0x3F, 0x01, 0x00, + 0x7F, 0x08, 0x14, 0x22, 0x41, 0x00, + 0x7F, 0x40, 0x40, 0x40, 0x40, 0x00, + 0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00, + 0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00, + 0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00, + 0x7F, 0x09, 0x09, 0x09, 0x06, 0x00, + 0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00, + 0x7F, 0x09, 0x19, 0x29, 0x46, 0x00, + 0x26, 0x49, 0x49, 0x49, 0x32, 0x00, + 0x03, 0x01, 0x7F, 0x01, 0x03, 0x00, + 0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00, + 0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00, + 0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00, + 0x63, 0x14, 0x08, 0x14, 0x63, 0x00, + 0x03, 0x04, 0x78, 0x04, 0x03, 0x00, + 0x61, 0x59, 0x49, 0x4D, 0x43, 0x00, + 0x00, 0x7F, 0x41, 0x41, 0x41, 0x00, + 0x02, 0x04, 0x08, 0x10, 0x20, 0x00, + 0x00, 0x41, 0x41, 0x41, 0x7F, 0x00, + 0x04, 0x02, 0x01, 0x02, 0x04, 0x00, + 0x40, 0x40, 0x40, 0x40, 0x40, 0x00, + 0x00, 0x03, 0x07, 0x08, 0x00, 0x00, + 0x20, 0x54, 0x54, 0x78, 0x40, 0x00, + 0x7F, 0x28, 0x44, 0x44, 0x38, 0x00, + 0x38, 0x44, 0x44, 0x44, 0x28, 0x00, + 0x38, 0x44, 0x44, 0x28, 0x7F, 0x00, + 0x38, 0x54, 0x54, 0x54, 0x18, 0x00, + 0x00, 0x08, 0x7E, 0x09, 0x02, 0x00, + 0x18, 0x24, 0x24, 0x1C, 0x78, 0x00, + 0x7F, 0x08, 0x04, 0x04, 0x78, 0x00, + 0x00, 0x44, 0x7D, 0x40, 0x00, 0x00, + 0x20, 0x40, 0x40, 0x3D, 0x00, 0x00, + 0x7F, 0x10, 0x28, 0x44, 0x00, 0x00, + 0x00, 0x41, 0x7F, 0x40, 0x00, 0x00, + 0x7C, 0x04, 0x78, 0x04, 0x78, 0x00, + 0x7C, 0x08, 0x04, 0x04, 0x78, 0x00, + 0x38, 0x44, 0x44, 0x44, 0x38, 0x00, + 0x7C, 0x18, 0x24, 0x24, 0x18, 0x00, + 0x18, 0x24, 0x24, 0x18, 0x7C, 0x00, + 0x7C, 0x08, 0x04, 0x04, 0x08, 0x00, + 0x48, 0x54, 0x54, 0x54, 0x24, 0x00, + 0x04, 0x04, 0x3F, 0x44, 0x24, 0x00, + 0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00, + 0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00, + 0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00, + 0x44, 0x28, 0x10, 0x28, 0x44, 0x00, + 0x4C, 0x90, 0x10, 0x90, 0x7C, 0x00, + 0x44, 0x64, 0x54, 0x4C, 0x44, 0x00, + 0x00, 0x08, 0x36, 0x41, 0x00, 0x00, + 0x00, 0x00, 0x77, 0x00, 0x00, 0x00, + 0x00, 0x41, 0x36, 0x08, 0x00, 0x00, + 0x02, 0x01, 0x02, 0x04, 0x02, 0x00, + 0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00, # endif +// top Logo section # if defined(OLED_LOGO_GMK_BAD) - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0x80 - 0x80, 0xC0, 0xE0, 0xF0, 0xF0, 0x70, // 0x81 - 0x38, 0x38, 0x38, 0x78, 0x70, 0xF0, // 0x82 - 0xE0, 0xE0, 0x80, 0x00, 0x00, 0x00, // 0x83 - 0x00, 0x00, 0x00, 0x80, 0xF0, 0xF8, // 0x84 - 0xF8, 0xF8, 0xF8, 0x00, 0x00, 0x00, // 0x85 - 0x80, 0xE0, 0xF8, 0xF8, 0xF8, 0xF8, // 0x86 - 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, // 0x87 - 0x80, 0xF8, 0xF8, 0xF8, 0x38, 0x00, // 0x88 - 0x80, 0xE0, 0xF0, 0xF8, 0x78, 0x38, // 0x89 - 0x08, 0x08, 0x00, 0x00, 0x00, 0x00, // 0x8A - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0x8B - 0x80, 0xF8, 0xF8, 0xF8, 0x38, 0x38, // 0x8C - 0x38, 0xF8, 0xF0, 0xF0, 0xE0, 0x00, // 0x8D - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0x8E - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0x8F - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0x90 - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0x91 - 0x00, 0x00, 0x00, 0x80, 0xFC, 0xFC, // 0x92 - 0xFC, 0x1C, 0x00, 0x00, 0x00, 0x00, // 0x93 - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0x94 - 0xE0, 0xF0, 0xF0, 0xF0, 0xE0, 0xEC, // 0x95 - 0xEE, 0xF7, 0xF3, 0x70, 0x20, 0x00, // 0x96 - 0x7C, 0x7C, 0x7C, 0x7E, 0x00, 0x7E, // 0x97 - 0x7E, 0x7E, 0x7F, 0x7F, 0x7F, 0x00, // 0x98 - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0x99 - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0x9A - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0x9B - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0x9C - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0x9D - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0x9E - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0x9F - 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, // 0xA0 - 0xFF, 0xFF, 0xFF, 0xC1, 0x80, 0x00, // 0xA1 - 0x00, 0x38, 0x38, 0xB8, 0xB8, 0xF9, // 0xA2 - 0xF9, 0xF8, 0x38, 0x00, 0x00, 0x00, // 0xA3 - 0x00, 0xC0, 0xF8, 0xFF, 0xFF, 0x1F, // 0xA4 - 0x01, 0x3F, 0xFF, 0xFF, 0xF0, 0xFE, // 0xA5 - 0x7F, 0x0F, 0x03, 0xFF, 0xFF, 0xFF, // 0xA6 - 0xFF, 0x00, 0x00, 0x00, 0x00, 0x80, // 0xA7 - 0xFF, 0xFF, 0xFF, 0x3F, 0x1E, 0x7F, // 0xA8 - 0xFF, 0xFF, 0xF3, 0xC1, 0x80, 0x00, // 0xA9 - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0xAA - 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, // 0xAB - 0xFF, 0xFF, 0xFF, 0x3F, 0x1C, 0x1C, // 0xAC - 0x9C, 0xFF, 0xFF, 0xF3, 0xE1, 0x00, // 0xAD - 0x00, 0x00, 0x00, 0xF0, 0xFC, 0xFE, // 0xAE - 0xFF, 0x0F, 0x07, 0x07, 0x8E, 0xFF, // 0xAF - 0xFF, 0xFF, 0x3F, 0x00, 0x00, 0x00, // 0xB0 - 0x00, 0xF0, 0xFC, 0xFE, 0xFF, 0x8F, // 0xB1 - 0x07, 0x07, 0x8E, 0xFF, 0xFF, 0xFF, // 0xB2 - 0x3F, 0x00, 0x00, 0x00, 0x00, 0x80, // 0xB3 - 0xC0, 0x80, 0x00, 0x00, 0x00, 0x00, // 0xB4 - 0x0F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F, // 0xB5 - 0x7F, 0x7F, 0x3F, 0x1E, 0x0C, 0x00, // 0xB6 - 0x1F, 0x1F, 0x1F, 0x3F, 0x00, 0x3F, // 0xB7 - 0x3F, 0x3F, 0x7F, 0x7F, 0x7F, 0x00, // 0xB8 - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0xB9 - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0xBA - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0xBB - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0xBC - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0xBD - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0xBE - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0xBF - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0xC0 - 0x00, 0x01, 0x03, 0x03, 0x03, 0x07, // 0xC1 - 0x07, 0x07, 0x07, 0x03, 0x03, 0x03, // 0xC2 - 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, // 0xC3 - 0x06, 0x07, 0x07, 0x07, 0x01, 0x00, // 0xC4 - 0x00, 0x00, 0x07, 0x07, 0x07, 0x01, // 0xC5 - 0x00, 0x00, 0x00, 0x07, 0x07, 0x07, // 0xC6 - 0x07, 0x00, 0x00, 0x00, 0x00, 0x07, // 0xC7 - 0x07, 0x07, 0x07, 0x00, 0x00, 0x00, // 0xC8 - 0x00, 0x03, 0x07, 0x07, 0x07, 0x06, // 0xC9 - 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, // 0xCA - 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, // 0xCB - 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, // 0xCC - 0x07, 0x07, 0x03, 0x01, 0x00, 0x00, // 0xCD - 0x00, 0x00, 0x00, 0x00, 0x03, 0x07, // 0xCE - 0x07, 0x07, 0x07, 0x03, 0x07, 0x07, // 0xCF - 0x07, 0x07, 0x00, 0x00, 0x00, 0x00, // 0xD0 - 0x00, 0x00, 0x03, 0x07, 0x07, 0x07, // 0xD1 - 0x07, 0x03, 0x07, 0x07, 0x07, 0x07, // 0xD2 - 0x00, 0x00, 0x00, 0x00, 0x01, 0x07, // 0xD3 - 0x07, 0x07, 0x01, 0x00, 0x00, 0x00, // 0xD4 - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0xD5 - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0xD6 - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0xD7 - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0xD8 - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0xD9 - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0xDA - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0xDB - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0xDC - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0xDD - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0xDE - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0xDF - 0x00, 0x1C, 0x1C, 0x3E, 0x7F, 0x7F, - 0x00, 0x14, 0x08, 0x14, 0x00, 0x00, - 0x00, 0x1C, 0x1C, 0x3E, 0x7F, 0x7F, - 0x00, 0x22, 0x1C, 0x41, 0x3E, 0x00, - 0x00, 0x00, 0x00, 0x30, 0x18, 0x0C, - 0x06, 0x0C, 0x18, 0x30, 0x00, 0x00, - 0x00, 0x00, 0x06, 0x06, 0x06, 0x0C, - 0x18, 0x30, 0x66, 0x66, 0x66, 0x00, - 0x00, 0x00, 0x00, 0x08, 0x0C, 0x7E, - 0x7F, 0x7E, 0x0C, 0x08, 0x00, 0x00, - 0x00, 0x00, 0x77, 0x77, 0x77, 0x00, - 0x77, 0x77, 0x77, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xE7, 0xA5, 0xFF, 0x24, - 0x24, 0xFF, 0xA5, 0xE7, 0x00, 0x00, - 0x00, 0x00, 0x1C, 0x22, 0xC9, 0xD1, - 0xC9, 0x22, 0x1C, 0x00, 0x00, 0x00, - 0x00, 0x10, 0x02, 0x38, 0xFC, 0xED, - 0xFC, 0x38, 0x02, 0x10, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x3E, 0x4A, 0x4F, - 0x4A, 0x3E, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x40, 0x60, 0x6A, 0x64, - 0x6A, 0x60, 0x40, 0x00, 0x00, 0x00, - 0x00, 0x04, 0x42, 0x69, 0x65, 0x65, - 0x65, 0x69, 0x42, 0x04, 0x00, 0x00, - 0x00, 0x00, 0x1C, 0x14, 0x1C, 0x08, - 0x18, 0x08, 0x18, 0x00, 0x00, 0x00, - 0x00, 0x70, 0xC8, 0xEE, 0xF9, 0x70, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x80, 0xC0, 0xE0, 0xF0, 0xF0, 0x70, + 0x38, 0x38, 0x38, 0x78, 0x70, 0xF0, + 0xE0, 0xE0, 0x80, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x80, 0xF0, 0xF8, + 0xF8, 0xF8, 0xF8, 0x00, 0x00, 0x00, + 0x80, 0xE0, 0xF8, 0xF8, 0xF8, 0xF8, + 0xF0, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x80, 0xF8, 0xF8, 0xF8, 0x38, 0x00, + 0x80, 0xE0, 0xF0, 0xF8, 0x78, 0x38, + 0x08, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x80, 0xF8, 0xF8, 0xF8, 0x38, 0x38, + 0x38, 0xF8, 0xF0, 0xF0, 0xE0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x80, 0xFC, 0xFC, + 0xFC, 0x1C, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # elif defined(OLED_LOGO_HUE_MANITEE) - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0x80 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xC0, 0xC0, 0x90, 0x70, 0xE8, 0xA8, 0xE4, 0xC4, 0xC4, 0xA0, 0xE4, 0xB0, 0xDC, 0xE4, @@ -675,120 +574,13 @@ static const unsigned char font[] PROGMEM = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0xF8, 0xF8, 0x00, 0x00, 0x00, 0x00, // 0x90 - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0xE0, 0xF0, 0xF0, 0xF0, 0xE0, 0xEC, - 0xEE, 0xF7, 0xF3, 0x70, 0x20, 0x00, - 0x7C, 0x7C, 0x7C, 0x7E, 0x00, 0x7E, - 0x7E, 0x7E, 0x7F, 0x7F, 0x7F, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, // 0xA0 - 0xFC, 0xF6, 0xF7, 0xEF, 0xFF, 0x87, - 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, - 0x1F, 0x1F, 0x1F, 0xFF, 0xFF, 0xFF, - 0xFF, 0x07, 0x1F, 0x1F, 0x19, 0x15, - 0xF7, 0x16, 0x1A, 0x1B, 0x16, 0x07, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x0C, 0x0C, 0x33, 0x33, - 0x33, 0x33, 0x33, 0x33, 0xC0, 0xC0, - 0x00, 0x00, 0x03, 0x03, 0xFF, 0xFF, - 0x03, 0x03, 0x00, 0x00, 0xC0, 0xC0, - 0x00, 0x00, 0x00, 0xFC, 0xFC, 0x03, - 0x03, 0x03, 0x03, 0x03, 0x03, 0xFC, - 0xFC, 0x00, 0x00, 0x00, 0xFC, 0xFC, - 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, - 0xC0, 0xC0, 0x00, 0x00, 0x00, 0x00, - 0xFF, 0xFF, 0x30, 0x30, 0xCC, 0xCC, // 0xB0 - 0x03, 0x03, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x0F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F, - 0x7F, 0x7F, 0x3F, 0x1E, 0x0C, 0x00, - 0x1F, 0x1F, 0x1F, 0x3F, 0x00, 0x3F, - 0x3F, 0x3F, 0x7F, 0x7F, 0x7F, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, // 0xC0 - 0x03, 0x07, 0x07, 0x07, 0x07, 0x01, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x03, 0x07, 0x07, - 0x03, 0x00, 0x00, 0x02, 0x04, 0x00, - 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x03, 0x03, 0x03, 0x03, - 0x03, 0x03, 0x03, 0x03, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x03, 0x03, 0x03, 0x03, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, - 0x03, 0x03, 0x03, 0x03, 0x03, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x03, 0x03, 0x00, 0x00, 0x00, 0x00, // 0xD0 - 0x03, 0x03, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0xDF - 0x00, 0x1C, 0x1C, 0x3E, 0x7F, 0x7F, - 0x00, 0x14, 0x08, 0x14, 0x00, 0x00, - 0x00, 0x1C, 0x1C, 0x3E, 0x7F, 0x7F, - 0x00, 0x22, 0x1C, 0x41, 0x3E, 0x00, - 0x00, 0x00, 0x00, 0x30, 0x18, 0x0C, - 0x06, 0x0C, 0x18, 0x30, 0x00, 0x00, - 0x00, 0x00, 0x06, 0x06, 0x06, 0x0C, - 0x18, 0x30, 0x66, 0x66, 0x66, 0x00, - 0x00, 0x00, 0x00, 0x08, 0x0C, 0x7E, - 0x7F, 0x7E, 0x0C, 0x08, 0x00, 0x00, - 0x00, 0x00, 0x77, 0x77, 0x77, 0x00, - 0x77, 0x77, 0x77, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xE7, 0xA5, 0xFF, 0x24, - 0x24, 0xFF, 0xA5, 0xE7, 0x00, 0x00, - 0x00, 0x00, 0x1C, 0x22, 0xC9, 0xD1, - 0xC9, 0x22, 0x1C, 0x00, 0x00, 0x00, - 0x00, 0x10, 0x02, 0x38, 0xFC, 0xED, - 0xFC, 0x38, 0x02, 0x10, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x3E, 0x4A, 0x4F, - 0x4A, 0x3E, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x40, 0x60, 0x6A, 0x64, - 0x6A, 0x60, 0x40, 0x00, 0x00, 0x00, - 0x00, 0x04, 0x42, 0x69, 0x65, 0x65, - 0x65, 0x69, 0x42, 0x04, 0x00, 0x00, - 0x00, 0x00, 0x1C, 0x14, 0x1C, 0x08, - 0x18, 0x08, 0x18, 0x00, 0x00, 0x00, - 0x00, 0x70, 0xC8, 0xEE, 0xF9, 0x70, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xF8, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # elif defined(OLED_LOGO_CORNE) - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0x80 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0xE0, 0xF0, 0xF8, 0xF8, 0x18, 0x00, 0xC0, @@ -804,11 +596,36 @@ static const unsigned char font[] PROGMEM = { 0xC0, 0xE0, 0xE0, 0xE0, 0xE0, 0x00, 0x00, 0xE0, 0xE0, 0xC0, 0xC0, 0xE0, 0xE0, 0xE0, 0xE0, 0xE0, 0xC0, 0x80, - 0x00, 0x00, 0x00, 0x00, 0x80, 0xC0, // 0x90 + 0x00, 0x00, 0x00, 0x00, 0x80, 0xC0, 0xE0, 0xE0, 0xE0, 0xE0, 0xE0, 0xE0, 0xE0, 0xE0, 0xC0, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +# else + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x40, 0x40, 0x40, 0xF0, 0xF8, 0xF8, + 0xFF, 0x38, 0xFF, 0xF8, 0xF8, 0x3F, + 0xF8, 0xF8, 0xFF, 0x38, 0xFF, 0xF8, + 0xF8, 0xF0, 0x40, 0x40, 0x40, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, + 0xC0, 0xC0, 0xC0, 0x80, 0x00, 0x00, + 0xC0, 0xC0, 0x80, 0x00, 0x00, 0x00, + 0x80, 0xC0, 0xC0, 0x00, 0xC0, 0xC0, + 0x00, 0x00, 0x80, 0xC0, 0xC0, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xC0, 0xC0, + 0xC0, 0xC0, 0xC0, 0x00, 0xC0, 0xC0, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +#endif + +// First icon section 0xE0, 0xF0, 0xF0, 0xF0, 0xE0, 0xEC, 0xEE, 0xF7, 0xF3, 0x70, 0x20, 0x00, 0x7C, 0x7C, 0x7C, 0x7E, 0x00, 0x7E, @@ -817,10 +634,57 @@ static const unsigned char font[] PROGMEM = { 0x4F, 0x5B, 0xFE, 0xC0, 0x00, 0x00, 0xC0, 0x00, 0xDC, 0xD7, 0xDE, 0xDE, 0xDE, 0xD7, 0xDC, 0x00, 0xC0, 0x00, + 0x3E, 0x4A, 0x4F, 0x4A, 0x3E, 0x00, + 0x18, 0x3C, 0x7C, 0x3A, 0x7D, 0x24, + 0x14, 0x36, 0x00, 0x36, 0x77, 0x77, + +// middle logo section +# if defined(OLED_LOGO_GMK_BAD) + 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, + 0xFF, 0xFF, 0xFF, 0xC1, 0x80, 0x00, + 0x00, 0x38, 0x38, 0xB8, 0xB8, 0xF9, + 0xF9, 0xF8, 0x38, 0x00, 0x00, 0x00, + 0x00, 0xC0, 0xF8, 0xFF, 0xFF, 0x1F, + 0x01, 0x3F, 0xFF, 0xFF, 0xF0, 0xFE, + 0x7F, 0x0F, 0x03, 0xFF, 0xFF, 0xFF, + 0xFF, 0x00, 0x00, 0x00, 0x00, 0x80, + 0xFF, 0xFF, 0xFF, 0x3F, 0x1E, 0x7F, + 0xFF, 0xFF, 0xF3, 0xC1, 0x80, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, + 0xFF, 0xFF, 0xFF, 0x3F, 0x1C, 0x1C, + 0x9C, 0xFF, 0xFF, 0xF3, 0xE1, 0x00, + 0x00, 0x00, 0x00, 0xF0, 0xFC, 0xFE, + 0xFF, 0x0F, 0x07, 0x07, 0x8E, 0xFF, + 0xFF, 0xFF, 0x3F, 0x00, 0x00, 0x00, + 0x00, 0xF0, 0xFC, 0xFE, 0xFF, 0x8F, + 0x07, 0x07, 0x8E, 0xFF, 0xFF, 0xFF, + 0x3F, 0x00, 0x00, 0x00, 0x00, 0x80, + 0xC0, 0x80, 0x00, 0x00, 0x00, 0x00, +# elif defined(OLED_LOGO_HUE_MANITEE) + 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, + 0xFC, 0xF6, 0xF7, 0xEF, 0xFF, 0x87, + 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, + 0x1F, 0x1F, 0x1F, 0xFF, 0xFF, 0xFF, + 0xFF, 0x07, 0x1F, 0x1F, 0x19, 0x15, + 0xF7, 0x16, 0x1A, 0x1B, 0x16, 0x07, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x0C, 0x0C, 0x33, 0x33, + 0x33, 0x33, 0x33, 0x33, 0xC0, 0xC0, + 0x00, 0x00, 0x03, 0x03, 0xFF, 0xFF, + 0x03, 0x03, 0x00, 0x00, 0xC0, 0xC0, + 0x00, 0x00, 0x00, 0xFC, 0xFC, 0x03, + 0x03, 0x03, 0x03, 0x03, 0x03, 0xFC, + 0xFC, 0x00, 0x00, 0x00, 0xFC, 0xFC, + 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, + 0xC0, 0xC0, 0x00, 0x00, 0x00, 0x00, + 0xFF, 0xFF, 0x30, 0x30, 0xCC, 0xCC, + 0x03, 0x03, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +# elif defined(OLED_LOGO_CORNE) 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0xA0 0x00, 0x00, 0x00, 0xF8, 0xFC, 0xFE, 0xFF, 0xE0, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x80, 0xFF, 0xFF, @@ -836,250 +700,13 @@ static const unsigned char font[] PROGMEM = { 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0x01, 0x00, 0x00, 0x00, 0x00, 0x01, 0xFF, 0xFF, - 0xFF, 0x00, 0x00, 0xFF, 0xFF, 0xFF, // 0xB0 + 0xFF, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0x9D, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x1C, 0x9D, 0xDF, 0xDF, 0xDF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x0F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F, - 0x7F, 0x7F, 0x3F, 0x1E, 0x0C, 0x00, - 0x1F, 0x1F, 0x1F, 0x3F, 0x00, 0x3F, - 0x3F, 0x3F, 0x7F, 0x7F, 0x7F, 0x00, - 0x30, 0x7B, 0x7F, 0x78, 0x30, 0x20, - 0x20, 0x30, 0x78, 0x7F, 0x3B, 0x00, - 0x03, 0x00, 0x0F, 0x7F, 0x0F, 0x0F, - 0x0F, 0x7F, 0x0F, 0x00, 0x03, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0xC0 - 0x00, 0x00, 0x00, 0x03, 0x0F, 0x1F, - 0x3F, 0x3F, 0x3F, 0x3F, 0x1F, 0x1F, - 0x3F, 0x3F, 0x7F, 0x7F, 0x7F, 0x3F, - 0x3F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F, - 0x7F, 0x7C, 0x78, 0x78, 0x38, 0x1C, - 0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x01, 0x03, 0x07, 0x07, - 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, - 0x03, 0x01, 0x00, 0x00, 0x00, 0x00, - 0x01, 0x03, 0x07, 0x07, 0x07, 0x07, - 0x07, 0x07, 0x07, 0x07, 0x03, 0x01, - 0x00, 0x00, 0x00, 0x07, 0x07, 0x07, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x07, 0x07, 0x07, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x07, 0x07, - 0x07, 0x00, 0x00, 0x00, 0x01, 0x03, // 0xD0 - 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, - 0x07, 0x07, 0x03, 0x01, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0xDF - 0x00, 0x1C, 0x1C, 0x3E, 0x7F, 0x7F, - 0x00, 0x14, 0x08, 0x14, 0x00, 0x00, - 0x00, 0x1C, 0x1C, 0x3E, 0x7F, 0x7F, - 0x00, 0x22, 0x1C, 0x41, 0x3E, 0x00, - 0x00, 0x00, 0x00, 0x30, 0x18, 0x0C, - 0x06, 0x0C, 0x18, 0x30, 0x00, 0x00, - 0x00, 0x00, 0x06, 0x06, 0x06, 0x0C, - 0x18, 0x30, 0x66, 0x66, 0x66, 0x00, - 0x00, 0x00, 0x00, 0x08, 0x0C, 0x7E, - 0x7F, 0x7E, 0x0C, 0x08, 0x00, 0x00, - 0x00, 0x00, 0x77, 0x77, 0x77, 0x00, - 0x77, 0x77, 0x77, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xE7, 0xA5, 0xFF, 0x24, - 0x24, 0xFF, 0xA5, 0xE7, 0x00, 0x00, - 0x00, 0x00, 0x1C, 0x22, 0xC9, 0xD1, - 0xC9, 0x22, 0x1C, 0x00, 0x00, 0x00, - 0x00, 0x10, 0x02, 0x38, 0xFC, 0xED, - 0xFC, 0x38, 0x02, 0x10, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x3E, 0x4A, 0x4F, - 0x4A, 0x3E, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x40, 0x60, 0x6A, 0x64, - 0x6A, 0x60, 0x40, 0x00, 0x00, 0x00, - 0x00, 0x04, 0x42, 0x69, 0x65, 0x65, - 0x65, 0x69, 0x42, 0x04, 0x00, 0x00, - 0x00, 0x00, 0x1C, 0x14, 0x1C, 0x08, - 0x18, 0x08, 0x18, 0x00, 0x00, 0x00, - 0x00, 0x70, 0xC8, 0xEE, 0xF9, 0x70, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - -# elif defined(OLED_LOGO_GOTHAM) // see /keyboards/crkbd/keymaps/gotham/oled.c - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0x80 - 0x00, 0x00, 0xC0, 0x60, 0x30, 0x18, - 0xF8, 0x18, 0x00, 0xC0, 0x70, 0x1C, - 0x06, 0x03, 0x01, 0x01, 0x01, 0x01, - 0x01, 0xC3, 0x7E, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x08, 0x08, 0x08, 0x00, - 0x00, 0x08, 0x08, 0x08, 0x00, 0x1C, - 0x22, 0x41, 0x41, 0x41, 0x22, 0x1C, - 0x00, 0x08, 0x08, 0x08, 0x00, 0x00, - 0x08, 0x08, 0x08, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x20, 0x20, 0xF8, - 0x0C, 0x04, 0xE7, 0xE4, 0xE4, 0x07, - 0x04, 0xE4, 0xE7, 0xE4, 0x04, 0x07, - 0xE4, 0xE4, 0xE7, 0x04, 0x0C, 0xF8, - 0x20, 0x20, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x1C, 0x1C, 0x3E, 0x7F, 0x7F, - 0x00, 0x14, 0x08, 0x14, 0x00, 0x00, // 0x90 - 0x00, 0x1C, 0x1C, 0x3E, 0x7F, 0x7F, - 0x00, 0x22, 0x1C, 0x41, 0x3E, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, - 0x18, 0x0C, 0x06, 0x0C, 0x18, 0x30, - 0x77, 0x77, 0x77, 0x00, 0x77, 0x77, - 0x77, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x3E, 0x4A, 0x4F, - 0x4A, 0x3E, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, - 0x00, 0x00, 0x08, 0x00, 0x00, 0x60, - 0x70, 0x3E, 0x1F, 0x19, 0x18, 0x0C, - 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, - 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0xF8, 0x0C, 0x06, 0x07, 0xFC, // 0xA0 - 0x00, 0xFF, 0x01, 0x00, 0x00, 0x00, - 0xFF, 0x80, 0xFF, 0x01, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0xF0, 0x1C, - 0x07, 0x01, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x1C, 0x22, 0x41, 0x00, - 0x00, 0x1C, 0x22, 0x00, 0x00, 0x1C, - 0x3E, 0x7F, 0x63, 0x41, 0x22, 0x1C, - 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, - 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x49, 0x49, 0xFF, - 0x00, 0x00, 0x0F, 0x1F, 0x3F, 0x38, - 0x30, 0xFF, 0xFF, 0xFF, 0x30, 0x38, - 0x3F, 0x1F, 0x0F, 0x00, 0x00, 0xFF, - 0x49, 0x49, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x40, 0x60, 0x6A, 0x64, - 0x6A, 0x60, 0x40, 0x00, 0x00, 0x00, // 0xB0 - 0x00, 0x04, 0x42, 0x69, 0x65, 0x65, - 0x65, 0x69, 0x42, 0x04, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x06, 0x06, 0x06, - 0x0C, 0x18, 0x30, 0x66, 0x66, 0x66, - 0x00, 0x00, 0xFC, 0x24, 0x24, 0xFC, - 0x24, 0x24, 0xFC, 0x24, 0x24, 0xFC, - 0x24, 0x24, 0xFC, 0x24, 0x24, 0xFC, - 0x24, 0x24, 0xFC, 0x24, 0x24, 0xFC, - 0x24, 0x24, 0xFC, 0x00, 0x00, 0x00, - 0xF0, 0x90, 0x90, 0xF0, 0x90, 0x90, - 0xF0, 0x98, 0x9C, 0xF2, 0x22, 0x21, - 0xE1, 0x01, 0x01, 0x01, 0xF1, 0x91, - 0x91, 0xFA, 0x4C, 0x4C, 0xF8, 0x48, - 0x48, 0xF8, 0x48, 0x48, 0xF8, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x03, 0x0E, 0x18, 0x30, 0x21, // 0xC0 - 0x21, 0x31, 0x18, 0x10, 0x30, 0x20, - 0x60, 0x41, 0x60, 0x20, 0x30, 0x18, - 0x30, 0x60, 0x40, 0x40, 0x47, 0x4C, - 0x48, 0x68, 0x38, 0x1C, 0x0F, 0x00, - 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, - 0x00, 0x00, 0x08, 0x00, 0x00, 0x1C, - 0x22, 0x41, 0x63, 0x7F, 0x3E, 0x1C, - 0x00, 0x00, 0x22, 0x1C, 0x00, 0x00, - 0x41, 0x22, 0x1C, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x02, 0x02, 0x0F, - 0x18, 0x10, 0x70, 0x10, 0x10, 0x70, - 0x10, 0x13, 0x73, 0x13, 0x10, 0x70, - 0x10, 0x10, 0x70, 0x10, 0x18, 0x0F, - 0x02, 0x02, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x1C, 0x22, 0xC9, 0xD1, - 0xC9, 0x22, 0x1C, 0x00, 0x00, 0x00, // 0xD0 - 0x00, 0x10, 0x02, 0x38, 0xFC, 0xED, - 0xFC, 0x38, 0x02, 0x10, 0x00, 0x00, - 0x08, 0x0C, 0x7E, 0x7F, 0x7E, 0x0C, - 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x0F, 0x09, 0x09, 0x09, - 0x0F, 0x09, 0x09, 0x0F, 0x09, 0x09, - 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, - 0x09, 0x0F, 0x09, 0x09, 0x0F, 0x09, - 0x09, 0x09, 0x0F, 0x00, 0x00, 0x00, - 0x07, 0x04, 0x04, 0x07, 0x04, 0x04, - 0x07, 0x04, 0x04, 0x0F, 0x09, 0x09, - 0x0F, 0x00, 0x00, 0x00, 0x07, 0x04, - 0x04, 0x07, 0x02, 0x02, 0x03, 0x02, - 0x02, 0x03, 0x02, 0x02, 0x03, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0xDF - 0x00, 0x1C, 0x1C, 0x3E, 0x7F, 0x7F, - 0x00, 0x14, 0x08, 0x14, 0x00, 0x00, - 0x00, 0x1C, 0x1C, 0x3E, 0x7F, 0x7F, - 0x00, 0x22, 0x1C, 0x41, 0x3E, 0x00, - 0x00, 0x00, 0x00, 0x30, 0x18, 0x0C, - 0x06, 0x0C, 0x18, 0x30, 0x00, 0x00, - 0x00, 0x00, 0x06, 0x06, 0x06, 0x0C, - 0x18, 0x30, 0x66, 0x66, 0x66, 0x00, - 0x00, 0x00, 0x00, 0x08, 0x0C, 0x7E, - 0x7F, 0x7E, 0x0C, 0x08, 0x00, 0x00, - 0x00, 0x00, 0x77, 0x77, 0x77, 0x00, - 0x77, 0x77, 0x77, 0x00, 0x00, 0x00, - 0x00, 0x00, 0xE7, 0xA5, 0xFF, 0x24, - 0x24, 0xFF, 0xA5, 0xE7, 0x00, 0x00, - 0x00, 0x00, 0x1C, 0x22, 0xC9, 0xD1, - 0xC9, 0x22, 0x1C, 0x00, 0x00, 0x00, - 0x00, 0x10, 0x02, 0x38, 0xFC, 0xED, - 0xFC, 0x38, 0x02, 0x10, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x3E, 0x4A, 0x4F, - 0x4A, 0x3E, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x40, 0x60, 0x6A, 0x64, - 0x6A, 0x60, 0x40, 0x00, 0x00, 0x00, - 0x00, 0x04, 0x42, 0x69, 0x65, 0x65, - 0x65, 0x69, 0x42, 0x04, 0x00, 0x00, - 0x00, 0x00, 0x1C, 0x14, 0x1C, 0x08, - 0x18, 0x08, 0x18, 0x00, 0x00, 0x00, - 0x00, 0x70, 0xC8, 0xEE, 0xF9, 0x70, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # else - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0x80 - 0x40, 0x40, 0x40, 0xF0, 0xF8, 0xF8, - 0xFF, 0x38, 0xFF, 0xF8, 0xF8, 0x3F, - 0xF8, 0xF8, 0xFF, 0x38, 0xFF, 0xF8, - 0xF8, 0xF0, 0x40, 0x40, 0x40, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, - 0xC0, 0xC0, 0xC0, 0x80, 0x00, 0x00, - 0xC0, 0xC0, 0x80, 0x00, 0x00, 0x00, - 0x80, 0xC0, 0xC0, 0x00, 0xC0, 0xC0, - 0x00, 0x00, 0x80, 0xC0, 0xC0, 0x00, - 0x00, 0x00, 0x00, 0x00, 0xC0, 0xC0, - 0xC0, 0xC0, 0xC0, 0x00, 0xC0, 0xC0, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0x90 - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0xE0, 0xF0, 0xF0, 0xF0, 0xE0, 0xEC, - 0xEE, 0xF7, 0xF3, 0x70, 0x20, 0x00, - 0x7C, 0x7C, 0x7C, 0x7E, 0x00, 0x7E, - 0x7E, 0x7E, 0x7F, 0x7F, 0x7F, 0x00, - 0x00, 0x80, 0xC0, 0xE0, 0x7E, 0x5B, - 0x4F, 0x5B, 0xFE, 0xC0, 0x00, 0x00, - 0xC0, 0x00, 0xDC, 0xD7, 0xDE, 0xDE, - 0xDE, 0xD7, 0xDC, 0x00, 0xC0, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0xA0 0x49, 0x49, 0x49, 0xFF, 0xFF, 0xFF, 0xFF, 0xE0, 0xDF, 0xBF, 0xBF, 0x00, 0xBF, 0xBF, 0xDF, 0xE0, 0xFF, 0xFF, @@ -1095,11 +722,14 @@ static const unsigned char font[] PROGMEM = { 0x7F, 0x7E, 0x03, 0x03, 0x7E, 0x7E, 0x03, 0x03, 0x7F, 0x7E, 0x00, 0x0F, 0x3E, 0x70, 0x3C, 0x06, 0x3C, 0x70, - 0x3E, 0x0F, 0x00, 0x32, 0x7B, 0x49, // 0xB0 + 0x3E, 0x0F, 0x00, 0x32, 0x7B, 0x49, 0x49, 0x3F, 0x7E, 0x00, 0x7F, 0x7E, 0x03, 0x03, 0x00, 0x1E, 0x3F, 0x69, 0x69, 0x6F, 0x26, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +# endif + +// second icon section 0x0F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F, 0x7F, 0x7F, 0x3F, 0x1E, 0x0C, 0x00, 0x1F, 0x1F, 0x1F, 0x3F, 0x00, 0x3F, @@ -1109,9 +739,78 @@ static const unsigned char font[] PROGMEM = { 0x03, 0x00, 0x0F, 0x7F, 0x0F, 0x0F, 0x0F, 0x7F, 0x0F, 0x00, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xF0, 0xFE, 0xF1, 0x91, 0xF6, 0xF0, + 0xF0, 0xFC, 0xF2, 0x92, 0xFC, 0xF0, + +// bottom logo section +# if defined(OLED_LOGO_GMK_BAD) + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x01, 0x03, 0x03, 0x03, 0x07, + 0x07, 0x07, 0x07, 0x03, 0x03, 0x03, + 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x06, 0x07, 0x07, 0x07, 0x01, 0x00, + 0x00, 0x00, 0x07, 0x07, 0x07, 0x01, + 0x00, 0x00, 0x00, 0x07, 0x07, 0x07, + 0x07, 0x00, 0x00, 0x00, 0x00, 0x07, + 0x07, 0x07, 0x07, 0x00, 0x00, 0x00, + 0x00, 0x03, 0x07, 0x07, 0x07, 0x06, + 0x04, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, + 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, + 0x07, 0x07, 0x03, 0x01, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x03, 0x07, + 0x07, 0x07, 0x07, 0x03, 0x07, 0x07, + 0x07, 0x07, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x03, 0x07, 0x07, 0x07, + 0x07, 0x03, 0x07, 0x07, 0x07, 0x07, + 0x00, 0x00, 0x00, 0x00, 0x01, 0x07, + 0x07, 0x07, 0x01, 0x00, 0x00, 0x00, +# elif defined(OLED_LOGO_HUE_MANITEE) + 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, + 0x03, 0x07, 0x07, 0x07, 0x07, 0x01, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x03, 0x07, 0x07, + 0x03, 0x00, 0x00, 0x02, 0x04, 0x00, + 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x03, 0x03, 0x03, 0x03, + 0x03, 0x03, 0x03, 0x03, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x03, 0x03, 0x03, 0x03, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, + 0x03, 0x03, 0x03, 0x03, 0x03, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x03, 0x03, 0x00, 0x00, 0x00, 0x00, + 0x03, 0x03, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +# elif defined(OLED_LOGO_CORNE) + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x03, 0x0F, 0x1F, + 0x3F, 0x3F, 0x3F, 0x3F, 0x1F, 0x1F, + 0x3F, 0x3F, 0x7F, 0x7F, 0x7F, 0x3F, + 0x3F, 0x1F, 0x3F, 0x7F, 0x7F, 0x7F, + 0x7F, 0x7C, 0x78, 0x78, 0x38, 0x1C, + 0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x01, 0x03, 0x07, 0x07, + 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, + 0x03, 0x01, 0x00, 0x00, 0x00, 0x00, + 0x01, 0x03, 0x07, 0x07, 0x07, 0x07, + 0x07, 0x07, 0x07, 0x07, 0x03, 0x01, + 0x00, 0x00, 0x00, 0x07, 0x07, 0x07, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x07, 0x07, 0x07, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x07, 0x07, + 0x07, 0x00, 0x00, 0x00, 0x01, 0x03, + 0x07, 0x07, 0x07, 0x07, 0x07, 0x07, + 0x07, 0x07, 0x03, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0xC0 +#else + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x07, 0x0F, 0x0F, 0x7F, 0x0F, 0x7F, 0x0F, 0x0F, 0x7E, 0x0F, 0x0F, 0x7F, 0x0F, 0x7F, 0x0F, @@ -1127,12 +826,16 @@ static const unsigned char font[] PROGMEM = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0xD0 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +#endif + +// third icon section + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, @@ -1142,7 +845,8 @@ static const unsigned char font[] PROGMEM = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, // 0xDF + +// fourth icon section 0x00, 0x1C, 0x1C, 0x3E, 0x7F, 0x7F, 0x00, 0x14, 0x08, 0x14, 0x00, 0x00, 0x00, 0x1C, 0x1C, 0x3E, 0x7F, 0x7F, @@ -1175,8 +879,6 @@ static const unsigned char font[] PROGMEM = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - -# endif }; // clang-format on #endif diff --git a/users/drashna/oled_stuff.c b/users/drashna/oled_stuff.c index 7811cabc60..4b54919507 100644 --- a/users/drashna/oled_stuff.c +++ b/users/drashna/oled_stuff.c @@ -16,6 +16,8 @@ #include "drashna.h" +extern bool host_driver_disabled; + #ifndef KEYLOGGER_LENGTH // # ifdef OLED_DISPLAY_128X64 # define KEYLOGGER_LENGTH ((uint8_t)(OLED_DISPLAY_HEIGHT / OLED_FONT_WIDTH)) @@ -29,24 +31,24 @@ static char keylog_str[KEYLOGGER_LENGTH + 1] = {0}; static uint16_t log_timer = 0; // clang-format off -static const char PROGMEM code_to_name[0xFF] = { +static const char PROGMEM code_to_name[256] = { // 0 1 2 3 4 5 6 7 8 9 A B c D E F ' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f', 'g', 'h', 'i', 'j', 'k', 'l', // 0x 'm', 'n', 'o', 'p', 'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z', '1', '2', // 1x '3', '4', '5', '6', '7', '8', '9', '0', 20, 19, 27, 26, 22, '-', '=', '[', // 2x - ']','\\', '#', ';','\'', '`', ',', '.', '/', 128, ' ', ' ', ' ', ' ', ' ', ' ', // 3x - ' ', ' ', ' ', ' ', ' ', ' ', 'P', 'S', ' ', ' ', ' ', ' ', 16, ' ', ' ', ' ', // 4x - ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // 5x - ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // 6x + ']','\\', '#', ';','\'', '`', ',', '.', '/', 128, '1', '2', '3', '4', '5', '6', // 3x + '7', '8', '9', '0', '1', '2', 'P', 'S', 19, ' ', 17, 30, 16, 16, 31, 26, // 4x + 27, 25, 24, 'N', '/', '*', '-', '+', 23, '1', '2', '3', '4', '5', '6', '7', // 5x + '8', '9', '0', '.','\\', 'A', 0, '=', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // 6x ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // 7x ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // 8x ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // 9x - ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // Ax + ' ', ' ', ' ', ' ', ' ', 0, ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // Ax ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // Bx ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // Cx ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // Dx - 'C', 'S', 'A', 'C', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // Ex - ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ' // Fx + 'C', 'S', 'A', 'C', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', 24, 26, 24, // Ex + 25,0x9D,0x9D,0x9D,0x9D,0x9D,0x9D,0x9D,0x9D, 24, 25, 27, 26, ' ', ' ', ' ' // Fx }; // clang-format on @@ -148,8 +150,8 @@ void render_keylock_status(uint8_t led_usb_state) { oled_write_P(PSTR(OLED_RENDER_LOCK_NUML), led_usb_state & (1 << USB_LED_NUM_LOCK)); oled_write_P(PSTR(" "), false); oled_write_P(PSTR(OLED_RENDER_LOCK_CAPS), led_usb_state & (1 << USB_LED_CAPS_LOCK)); - oled_write_P(PSTR(" "), false); - oled_write_P(PSTR(OLED_RENDER_LOCK_SCLK), led_usb_state & (1 << USB_LED_SCROLL_LOCK)); +// oled_write_P(PSTR(" "), false); +// oled_write_P(PSTR(OLED_RENDER_LOCK_SCLK), led_usb_state & (1 << USB_LED_SCROLL_LOCK)); } void render_matrix_scan_rate(void) { @@ -292,12 +294,22 @@ void render_user_status(void) { static const char PROGMEM rgb_layer_status[2][3] = {{0xEE, 0xEF, 0}, {0xF0, 0xF1, 0}}; oled_write_P(rgb_layer_status[userspace_config.rgb_layer_change], false); - static const char PROGMEM nukem_good[2][3] = {{0xF8, 0xF9, 0}, {0xF6, 0xF7, 0}}; - oled_write_P(nukem_good[0], userspace_config.nuke_switch); + static const char PROGMEM cat_mode[2][3] = {{0xF8, 0xF9, 0}, {0xF6, 0xF7, 0}}; + oled_write_P(cat_mode[0], host_driver_disabled); #if defined(UNICODE_ENABLE) static const char PROGMEM uc_mod_status[5][3] = {{0xEA, 0xEB, 0}, {0xEC, 0xED, 0}}; oled_write_P(uc_mod_status[get_unicode_input_mode() == UC_MAC], false); #endif + if (userspace_config.nuke_switch) { +#if !defined(OLED_DISPLAY_128X64) + oled_write_P(PSTR(" "), false); +#endif + static const char PROGMEM nukem_good[2] = {0xFA, 0}; + oled_write_P(nukem_good, false); +#if !defined(OLED_DISPLAY_128X64) + oled_advance_page(true); +#endif + } #if defined(OLED_DISPLAY_128X64) oled_advance_page(true); #endif diff --git a/users/drashna/process_records.c b/users/drashna/process_records.c index 900b6da15e..1e7f7ca762 100644 --- a/users/drashna/process_records.c +++ b/users/drashna/process_records.c @@ -18,7 +18,7 @@ #include "version.h" uint16_t copy_paste_timer; - +bool host_driver_disabled = false; // Defines actions tor my global custom keycodes. Defined in drashna.h file // Then runs the _keymap's record handier if not processed here @@ -198,6 +198,23 @@ bool process_record_user(uint16_t keycode, keyrecord_t *re eeconfig_update_user(userspace_config.raw); } } + break; + case KEYLOCK: { + static host_driver_t *host_driver = 0; + + if (record->event.pressed) { + if (host_get_driver()) { + host_driver = host_get_driver(); + clear_keyboard(); + host_set_driver(0); + host_driver_disabled = true; + } else { + host_set_driver(host_driver); + host_driver_disabled = false; + } + } + break; + } #endif } return true; diff --git a/users/drashna/process_records.h b/users/drashna/process_records.h index 231480ac59..897d7bbcc9 100644 --- a/users/drashna/process_records.h +++ b/users/drashna/process_records.h @@ -46,6 +46,7 @@ enum userspace_custom_keycodes { UC_TABL, // ┬─┬ノ( º _ ºノ) UC_SHRG, // ¯\_(ツ)_/¯ UC_DISA, // ಠ_ಠ + KEYLOCK, // Locks keyboard by unmounting driver NEW_SAFE_RANGE // use "NEWPLACEHOLDER for keymap specific codes }; diff --git a/users/drashna/transport_sync.c b/users/drashna/transport_sync.c index 39db641354..daa14bbef7 100644 --- a/users/drashna/transport_sync.c +++ b/users/drashna/transport_sync.c @@ -33,15 +33,16 @@ extern bool tap_toggling; extern bool swap_hands; #endif extern userspace_config_t userspace_config; +extern bool host_driver_disabled; uint16_t transport_keymap_config = 0; -uint32_t transport_userspace_config = 0; +uint32_t transport_userspace_config = 0, transport_user_state = 0; user_runtime_config_t user_state; void user_state_sync(uint8_t initiator2target_buffer_size, const void* initiator2target_buffer, uint8_t target2initiator_buffer_size, void* target2initiator_buffer) { - if (initiator2target_buffer_size == sizeof(user_state)) { - memcpy(&user_state, initiator2target_buffer, initiator2target_buffer_size); + if (initiator2target_buffer_size == sizeof(transport_user_state)) { + memcpy(&transport_user_state, initiator2target_buffer, initiator2target_buffer_size); } } void user_keymap_sync(uint8_t initiator2target_buffer_size, const void* initiator2target_buffer, uint8_t target2initiator_buffer_size, void* target2initiator_buffer) { @@ -79,9 +80,13 @@ void user_transport_update(void) { #ifdef SWAP_HANDS_ENABLE user_state.swap_hands = swap_hands; #endif + user_state.host_driver_disabled = host_driver_disabled; + + transport_user_state = user_state.raw; } else { keymap_config.raw = transport_keymap_config; userspace_config.raw = transport_userspace_config; + user_state.raw = transport_user_state; #ifdef UNICODE_ENABLE unicode_config.input_mode = user_state.unicode_mode; #endif @@ -91,22 +96,21 @@ void user_transport_update(void) { #ifdef SWAP_HANDS_ENABLE swap_hands = user_state.swap_hands; #endif + host_driver_disabled = user_state.host_driver_disabled; } } void user_transport_sync(void) { if (is_keyboard_master()) { // Keep track of the last state, so that we can tell if we need to propagate to slave - static user_runtime_config_t last_user_state; static uint16_t last_keymap = 0; - static uint32_t last_config = 0; - static uint32_t last_sync[3]; + static uint32_t last_config = 0, last_sync[3], last_user_state = 0; bool needs_sync = false; // Check if the state values are different - if (memcmp(&user_state, &last_user_state, sizeof(user_state))) { + if (memcmp(&transport_user_state, &last_user_state, sizeof(transport_user_state))) { needs_sync = true; - memcpy(&last_user_state, &user_state, sizeof(user_state)); + memcpy(&last_user_state, &transport_user_state, sizeof(transport_user_state)); } // Send to slave every 500ms regardless of state change if (timer_elapsed32(last_sync[0]) > 250) { diff --git a/users/drashna/transport_sync.h b/users/drashna/transport_sync.h index 062df2bacc..70b6ea522b 100644 --- a/users/drashna/transport_sync.h +++ b/users/drashna/transport_sync.h @@ -19,12 +19,16 @@ #include "drashna.h" -__attribute__((aligned(8))) typedef struct { - bool audio_enable; - bool audio_clicky_enable; - bool tap_toggling; - bool unicode_mode; - bool swap_hands; +typedef union { + uint32_t raw; + struct { + bool audio_enable :1; + bool audio_clicky_enable :1; + bool tap_toggling :1; + bool unicode_mode :1; + bool swap_hands :1; + bool host_driver_disabled :1; + }; } user_runtime_config_t; extern user_runtime_config_t user_state; From 6b299fab6e6a3143c061b9ea005253361fcd524b Mon Sep 17 00:00:00 2001 From: Manna Harbour <51143715+manna-harbour@users.noreply.github.com> Date: Sat, 16 Oct 2021 16:33:45 +1100 Subject: [PATCH 293/595] [Keymap] Update Miryoku (#14827) --- .../keymaps/manna-harbour_miryoku/config.h | 2 +- .../keymaps/manna-harbour_miryoku/keymap.c | 2 +- .../keymaps/manna-harbour_miryoku/config.h | 24 + .../keymaps/manna-harbour_miryoku/keymap.c | 5 + .../keymaps/manna-harbour_miryoku/config.h | 2 +- .../keymaps/manna-harbour_miryoku/keymap.c | 2 +- .../keymaps/manna-harbour_miryoku/config.h | 2 +- .../keymaps/manna-harbour_miryoku/keymap.c | 2 +- .../keymaps/manna-harbour_miryoku/config.h | 2 +- .../keymaps/manna-harbour_miryoku/keymap.c | 2 +- .../keymaps/manna-harbour_miryoku/config.h | 2 +- .../keymaps/manna-harbour_miryoku/keymap.c | 2 +- .../keymaps/manna-harbour_miryoku/config.h | 2 +- .../keymaps/manna-harbour_miryoku/keymap.c | 2 +- .../keymaps/manna-harbour_miryoku/config.h | 2 +- .../keymaps/manna-harbour_miryoku/keymap.c | 2 +- .../keymaps/manna-harbour_miryoku/config.h | 2 +- .../keymaps/manna-harbour_miryoku/keymap.c | 2 +- .../keymaps/manna-harbour_miryoku/config.h | 2 +- .../keymaps/manna-harbour_miryoku/keymap.c | 2 +- .../keymaps/manna-harbour_miryoku/config.h | 2 +- .../keymaps/manna-harbour_miryoku/keymap.c | 2 +- .../keymaps/manna-harbour_miryoku/config.h | 2 +- .../keymaps/manna-harbour_miryoku/keymap.c | 2 +- .../keymaps/manna-harbour_miryoku/config.h | 2 +- .../keymaps/manna-harbour_miryoku/keymap.c | 2 +- .../keymaps/manna-harbour_miryoku/config.h | 2 +- .../keymaps/manna-harbour_miryoku/keymap.c | 2 +- .../keymaps/manna-harbour_miryoku/config.h | 2 +- .../keymaps/manna-harbour_miryoku/keymap.c | 2 +- .../60_ansi/manna-harbour_miryoku/config.h | 36 +- .../60_ansi/manna-harbour_miryoku/keymap.c | 2 +- .../ergodox/manna-harbour_miryoku/config.h | 2 +- .../ergodox/manna-harbour_miryoku/keymap.c | 2 +- .../ortho_4x10/manna-harbour_miryoku/config.h | 39 +- .../ortho_4x10/manna-harbour_miryoku/keymap.c | 2 +- .../ortho_4x12/manna-harbour_miryoku/config.h | 2 +- .../ortho_4x12/manna-harbour_miryoku/keymap.c | 2 +- .../ortho_5x12/manna-harbour_miryoku/config.h | 2 +- .../ortho_5x12/manna-harbour_miryoku/keymap.c | 2 +- .../ortho_5x15/manna-harbour_miryoku/config.h | 2 +- .../ortho_5x15/manna-harbour_miryoku/keymap.c | 2 +- .../planck_mit/manna-harbour_miryoku/config.h | 2 +- .../planck_mit/manna-harbour_miryoku/keymap.c | 2 +- .../manna-harbour_miryoku/config.h | 2 +- .../manna-harbour_miryoku/keymap.c | 2 +- .../manna-harbour_miryoku/config.h | 2 +- .../manna-harbour_miryoku/keymap.c | 2 +- users/manna-harbour_miryoku/README.org | 1 - users/manna-harbour_miryoku/config.h | 2 +- .../manna-harbour_miryoku.c | 77 +- .../manna-harbour_miryoku.h | 4 +- .../{miryoku.org => readme.org} | 802 ++++++++++-------- users/manna-harbour_miryoku/rules.mk | 2 +- 54 files changed, 617 insertions(+), 463 deletions(-) create mode 100644 keyboards/bastardkb/scylla/keymaps/manna-harbour_miryoku/config.h create mode 100644 keyboards/bastardkb/scylla/keymaps/manna-harbour_miryoku/keymap.c delete mode 120000 users/manna-harbour_miryoku/README.org rename users/manna-harbour_miryoku/{miryoku.org => readme.org} (79%) diff --git a/keyboards/atreus/keymaps/manna-harbour_miryoku/config.h b/keyboards/atreus/keymaps/manna-harbour_miryoku/config.h index 5084aa5b9f..6bb1a9a7f3 100644 --- a/keyboards/atreus/keymaps/manna-harbour_miryoku/config.h +++ b/keyboards/atreus/keymaps/manna-harbour_miryoku/config.h @@ -1,6 +1,6 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/keyboards/atreus/keymaps/manna-harbour_miryoku/keymap.c b/keyboards/atreus/keymaps/manna-harbour_miryoku/keymap.c index 1520387e88..7c5717a0fe 100644 --- a/keyboards/atreus/keymaps/manna-harbour_miryoku/keymap.c +++ b/keyboards/atreus/keymaps/manna-harbour_miryoku/keymap.c @@ -1,5 +1,5 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/keyboards/bastardkb/scylla/keymaps/manna-harbour_miryoku/config.h b/keyboards/bastardkb/scylla/keymaps/manna-harbour_miryoku/config.h new file mode 100644 index 0000000000..09433f3f40 --- /dev/null +++ b/keyboards/bastardkb/scylla/keymaps/manna-harbour_miryoku/config.h @@ -0,0 +1,24 @@ +// Copyright 2019 Manna Harbour +// https://github.com/manna-harbour/miryoku +// generated -*- buffer-read-only: t -*- + +// This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . + +#pragma once + +#define XXX KC_NO + +#define LAYOUT_miryoku( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \ + N30, N31, K32, K33, K34, K35, K36, K37, N38, N39 \ +) \ +LAYOUT_split_4x6_5( \ +XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, \ +XXX, K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, XXX, \ +XXX, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, XXX, \ +XXX, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, XXX, \ + K32, K33, K34, K35, K36, K37, \ + XXX, XXX, XXX, XXX \ +) diff --git a/keyboards/bastardkb/scylla/keymaps/manna-harbour_miryoku/keymap.c b/keyboards/bastardkb/scylla/keymaps/manna-harbour_miryoku/keymap.c new file mode 100644 index 0000000000..7c5717a0fe --- /dev/null +++ b/keyboards/bastardkb/scylla/keymaps/manna-harbour_miryoku/keymap.c @@ -0,0 +1,5 @@ +// Copyright 2019 Manna Harbour +// https://github.com/manna-harbour/miryoku +// generated -*- buffer-read-only: t -*- + +// This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/keyboards/ergotravel/keymaps/manna-harbour_miryoku/config.h b/keyboards/ergotravel/keymaps/manna-harbour_miryoku/config.h index 087fa5852e..a246476ddc 100644 --- a/keyboards/ergotravel/keymaps/manna-harbour_miryoku/config.h +++ b/keyboards/ergotravel/keymaps/manna-harbour_miryoku/config.h @@ -1,6 +1,6 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/keyboards/ergotravel/keymaps/manna-harbour_miryoku/keymap.c b/keyboards/ergotravel/keymaps/manna-harbour_miryoku/keymap.c index 1520387e88..7c5717a0fe 100644 --- a/keyboards/ergotravel/keymaps/manna-harbour_miryoku/keymap.c +++ b/keyboards/ergotravel/keymaps/manna-harbour_miryoku/keymap.c @@ -1,5 +1,5 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/keyboards/for_science/keymaps/manna-harbour_miryoku/config.h b/keyboards/for_science/keymaps/manna-harbour_miryoku/config.h index a297605096..1794ba4fd6 100644 --- a/keyboards/for_science/keymaps/manna-harbour_miryoku/config.h +++ b/keyboards/for_science/keymaps/manna-harbour_miryoku/config.h @@ -1,6 +1,6 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/keyboards/for_science/keymaps/manna-harbour_miryoku/keymap.c b/keyboards/for_science/keymaps/manna-harbour_miryoku/keymap.c index 1520387e88..7c5717a0fe 100644 --- a/keyboards/for_science/keymaps/manna-harbour_miryoku/keymap.c +++ b/keyboards/for_science/keymaps/manna-harbour_miryoku/keymap.c @@ -1,5 +1,5 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/keyboards/gergo/keymaps/manna-harbour_miryoku/config.h b/keyboards/gergo/keymaps/manna-harbour_miryoku/config.h index b1438e94ef..2bfb5befb3 100644 --- a/keyboards/gergo/keymaps/manna-harbour_miryoku/config.h +++ b/keyboards/gergo/keymaps/manna-harbour_miryoku/config.h @@ -1,6 +1,6 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/keyboards/gergo/keymaps/manna-harbour_miryoku/keymap.c b/keyboards/gergo/keymaps/manna-harbour_miryoku/keymap.c index 1520387e88..7c5717a0fe 100644 --- a/keyboards/gergo/keymaps/manna-harbour_miryoku/keymap.c +++ b/keyboards/gergo/keymaps/manna-harbour_miryoku/keymap.c @@ -1,5 +1,5 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/keyboards/handwired/dactyl_manuform/4x5/keymaps/manna-harbour_miryoku/config.h b/keyboards/handwired/dactyl_manuform/4x5/keymaps/manna-harbour_miryoku/config.h index 6348254503..27526140c9 100644 --- a/keyboards/handwired/dactyl_manuform/4x5/keymaps/manna-harbour_miryoku/config.h +++ b/keyboards/handwired/dactyl_manuform/4x5/keymaps/manna-harbour_miryoku/config.h @@ -1,6 +1,6 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/keyboards/handwired/dactyl_manuform/4x5/keymaps/manna-harbour_miryoku/keymap.c b/keyboards/handwired/dactyl_manuform/4x5/keymaps/manna-harbour_miryoku/keymap.c index 1520387e88..7c5717a0fe 100644 --- a/keyboards/handwired/dactyl_manuform/4x5/keymaps/manna-harbour_miryoku/keymap.c +++ b/keyboards/handwired/dactyl_manuform/4x5/keymaps/manna-harbour_miryoku/keymap.c @@ -1,5 +1,5 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/keyboards/handwired/dactyl_manuform/5x6/keymaps/manna-harbour_miryoku/config.h b/keyboards/handwired/dactyl_manuform/5x6/keymaps/manna-harbour_miryoku/config.h index 232b3930bf..5a848d26e5 100644 --- a/keyboards/handwired/dactyl_manuform/5x6/keymaps/manna-harbour_miryoku/config.h +++ b/keyboards/handwired/dactyl_manuform/5x6/keymaps/manna-harbour_miryoku/config.h @@ -1,6 +1,6 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/keyboards/handwired/dactyl_manuform/5x6/keymaps/manna-harbour_miryoku/keymap.c b/keyboards/handwired/dactyl_manuform/5x6/keymaps/manna-harbour_miryoku/keymap.c index 1520387e88..7c5717a0fe 100644 --- a/keyboards/handwired/dactyl_manuform/5x6/keymaps/manna-harbour_miryoku/keymap.c +++ b/keyboards/handwired/dactyl_manuform/5x6/keymaps/manna-harbour_miryoku/keymap.c @@ -1,5 +1,5 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/keyboards/keebio/iris/keymaps/manna-harbour_miryoku/config.h b/keyboards/keebio/iris/keymaps/manna-harbour_miryoku/config.h index 0e9415edeb..2a737462dd 100644 --- a/keyboards/keebio/iris/keymaps/manna-harbour_miryoku/config.h +++ b/keyboards/keebio/iris/keymaps/manna-harbour_miryoku/config.h @@ -1,6 +1,6 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/keyboards/keebio/iris/keymaps/manna-harbour_miryoku/keymap.c b/keyboards/keebio/iris/keymaps/manna-harbour_miryoku/keymap.c index 1520387e88..7c5717a0fe 100644 --- a/keyboards/keebio/iris/keymaps/manna-harbour_miryoku/keymap.c +++ b/keyboards/keebio/iris/keymaps/manna-harbour_miryoku/keymap.c @@ -1,5 +1,5 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/keyboards/keyboardio/atreus/keymaps/manna-harbour_miryoku/config.h b/keyboards/keyboardio/atreus/keymaps/manna-harbour_miryoku/config.h index 97e4d23d8a..3de799f942 100644 --- a/keyboards/keyboardio/atreus/keymaps/manna-harbour_miryoku/config.h +++ b/keyboards/keyboardio/atreus/keymaps/manna-harbour_miryoku/config.h @@ -1,6 +1,6 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/keyboards/keyboardio/atreus/keymaps/manna-harbour_miryoku/keymap.c b/keyboards/keyboardio/atreus/keymaps/manna-harbour_miryoku/keymap.c index 1520387e88..7c5717a0fe 100644 --- a/keyboards/keyboardio/atreus/keymaps/manna-harbour_miryoku/keymap.c +++ b/keyboards/keyboardio/atreus/keymaps/manna-harbour_miryoku/keymap.c @@ -1,5 +1,5 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/keyboards/lily58/keymaps/manna-harbour_miryoku/config.h b/keyboards/lily58/keymaps/manna-harbour_miryoku/config.h index 14a0afbfee..1e1a2802ff 100644 --- a/keyboards/lily58/keymaps/manna-harbour_miryoku/config.h +++ b/keyboards/lily58/keymaps/manna-harbour_miryoku/config.h @@ -1,6 +1,6 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/keyboards/lily58/keymaps/manna-harbour_miryoku/keymap.c b/keyboards/lily58/keymaps/manna-harbour_miryoku/keymap.c index 1520387e88..7c5717a0fe 100644 --- a/keyboards/lily58/keymaps/manna-harbour_miryoku/keymap.c +++ b/keyboards/lily58/keymaps/manna-harbour_miryoku/keymap.c @@ -1,5 +1,5 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/keyboards/moonlander/keymaps/manna-harbour_miryoku/config.h b/keyboards/moonlander/keymaps/manna-harbour_miryoku/config.h index ad6eee3682..6ea1541da2 100644 --- a/keyboards/moonlander/keymaps/manna-harbour_miryoku/config.h +++ b/keyboards/moonlander/keymaps/manna-harbour_miryoku/config.h @@ -1,6 +1,6 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/keyboards/moonlander/keymaps/manna-harbour_miryoku/keymap.c b/keyboards/moonlander/keymaps/manna-harbour_miryoku/keymap.c index 1520387e88..7c5717a0fe 100644 --- a/keyboards/moonlander/keymaps/manna-harbour_miryoku/keymap.c +++ b/keyboards/moonlander/keymaps/manna-harbour_miryoku/keymap.c @@ -1,5 +1,5 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/keyboards/redox_w/keymaps/manna-harbour_miryoku/config.h b/keyboards/redox_w/keymaps/manna-harbour_miryoku/config.h index f426e2f79f..ffc0d98798 100644 --- a/keyboards/redox_w/keymaps/manna-harbour_miryoku/config.h +++ b/keyboards/redox_w/keymaps/manna-harbour_miryoku/config.h @@ -1,6 +1,6 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/keyboards/redox_w/keymaps/manna-harbour_miryoku/keymap.c b/keyboards/redox_w/keymaps/manna-harbour_miryoku/keymap.c index 1520387e88..7c5717a0fe 100644 --- a/keyboards/redox_w/keymaps/manna-harbour_miryoku/keymap.c +++ b/keyboards/redox_w/keymaps/manna-harbour_miryoku/keymap.c @@ -1,5 +1,5 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/keyboards/sofle/keymaps/manna-harbour_miryoku/config.h b/keyboards/sofle/keymaps/manna-harbour_miryoku/config.h index 53825775cc..8372e10168 100644 --- a/keyboards/sofle/keymaps/manna-harbour_miryoku/config.h +++ b/keyboards/sofle/keymaps/manna-harbour_miryoku/config.h @@ -1,6 +1,6 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/keyboards/sofle/keymaps/manna-harbour_miryoku/keymap.c b/keyboards/sofle/keymaps/manna-harbour_miryoku/keymap.c index 1520387e88..7c5717a0fe 100644 --- a/keyboards/sofle/keymaps/manna-harbour_miryoku/keymap.c +++ b/keyboards/sofle/keymaps/manna-harbour_miryoku/keymap.c @@ -1,5 +1,5 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/keyboards/splitkb/kyria/keymaps/manna-harbour_miryoku/config.h b/keyboards/splitkb/kyria/keymaps/manna-harbour_miryoku/config.h index c04bee9b4f..495b3032c6 100644 --- a/keyboards/splitkb/kyria/keymaps/manna-harbour_miryoku/config.h +++ b/keyboards/splitkb/kyria/keymaps/manna-harbour_miryoku/config.h @@ -1,6 +1,6 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/keyboards/splitkb/kyria/keymaps/manna-harbour_miryoku/keymap.c b/keyboards/splitkb/kyria/keymaps/manna-harbour_miryoku/keymap.c index 1520387e88..7c5717a0fe 100644 --- a/keyboards/splitkb/kyria/keymaps/manna-harbour_miryoku/keymap.c +++ b/keyboards/splitkb/kyria/keymaps/manna-harbour_miryoku/keymap.c @@ -1,5 +1,5 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/keyboards/torn/keymaps/manna-harbour_miryoku/config.h b/keyboards/torn/keymaps/manna-harbour_miryoku/config.h index 60ae65d505..89a67474ca 100644 --- a/keyboards/torn/keymaps/manna-harbour_miryoku/config.h +++ b/keyboards/torn/keymaps/manna-harbour_miryoku/config.h @@ -1,6 +1,6 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/keyboards/torn/keymaps/manna-harbour_miryoku/keymap.c b/keyboards/torn/keymaps/manna-harbour_miryoku/keymap.c index 1520387e88..7c5717a0fe 100644 --- a/keyboards/torn/keymaps/manna-harbour_miryoku/keymap.c +++ b/keyboards/torn/keymaps/manna-harbour_miryoku/keymap.c @@ -1,5 +1,5 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/layouts/community/60_ansi/manna-harbour_miryoku/config.h b/layouts/community/60_ansi/manna-harbour_miryoku/config.h index 14bf842165..81f1ceb42f 100644 --- a/layouts/community/60_ansi/manna-harbour_miryoku/config.h +++ b/layouts/community/60_ansi/manna-harbour_miryoku/config.h @@ -1,6 +1,6 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . @@ -9,7 +9,7 @@ #define XXX KC_NO #if defined MIRYOKU_MAPPING_NOREVERSEANGLE -#define LAYOUT_miryoku(\ + #define LAYOUT_miryoku(\ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09,\ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,\ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\ @@ -22,8 +22,38 @@ K00, K01, K02, K03, K04, XXX, XXX, XXX, K05, K06, K07, K08, K09, XX XXX, K32, K33, K34, XXX, XXX, XXX, XXX, K35, K36, K37, XXX,\ XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX\ ) +#elif defined MIRYOKU_MAPPING_LITE + #if defined MIRYOKU_LAYERS_FLIP + #define LAYOUT_miryoku( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \ + N30, N31, K32, K33, K34, K35, K36, K37, N38, N39 \ +) \ +LAYOUT_60_ansi( \ +KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ +KC_TAB, K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, KC_LBRC, KC_RBRC, KC_BSLS, \ +KC_CAPS, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, KC_SCLN, KC_ENT, \ +KC_LSFT, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, KC_RSFT, \ +KC_LCTL, KC_LGUI, KC_LALT, K36, KC_RALT, KC_RGUI, KC_APP, KC_RCTL \ +) + #else + #define LAYOUT_miryoku( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \ + N30, N31, K32, K33, K34, K35, K36, K37, N38, N39 \ +) \ +LAYOUT_60_ansi( \ +KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ +KC_TAB, K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, KC_LBRC, KC_RBRC, KC_BSLS, \ +KC_CAPS, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, KC_SCLN, KC_ENT, \ +KC_LSFT, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, KC_RSFT, \ +KC_LCTL, KC_LGUI, KC_LALT, K33, KC_RALT, KC_RGUI, KC_APP, KC_RCTL \ +) + #endif #else -#define LAYOUT_miryoku(\ + #define LAYOUT_miryoku(\ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09,\ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,\ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\ diff --git a/layouts/community/60_ansi/manna-harbour_miryoku/keymap.c b/layouts/community/60_ansi/manna-harbour_miryoku/keymap.c index 1520387e88..7c5717a0fe 100644 --- a/layouts/community/60_ansi/manna-harbour_miryoku/keymap.c +++ b/layouts/community/60_ansi/manna-harbour_miryoku/keymap.c @@ -1,5 +1,5 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/layouts/community/ergodox/manna-harbour_miryoku/config.h b/layouts/community/ergodox/manna-harbour_miryoku/config.h index 836193ddce..10c61fdfdc 100644 --- a/layouts/community/ergodox/manna-harbour_miryoku/config.h +++ b/layouts/community/ergodox/manna-harbour_miryoku/config.h @@ -1,6 +1,6 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/layouts/community/ergodox/manna-harbour_miryoku/keymap.c b/layouts/community/ergodox/manna-harbour_miryoku/keymap.c index 1520387e88..7c5717a0fe 100644 --- a/layouts/community/ergodox/manna-harbour_miryoku/keymap.c +++ b/layouts/community/ergodox/manna-harbour_miryoku/keymap.c @@ -1,5 +1,5 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/layouts/community/ortho_4x10/manna-harbour_miryoku/config.h b/layouts/community/ortho_4x10/manna-harbour_miryoku/config.h index 7142f2960d..b1e9526f99 100644 --- a/layouts/community/ortho_4x10/manna-harbour_miryoku/config.h +++ b/layouts/community/ortho_4x10/manna-harbour_miryoku/config.h @@ -1,20 +1,37 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . #pragma once +#define XXX KC_NO + +#if defined MIRYOKU_MAPPING_ROTATE +#define LAYOUT_miryoku( \ +K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \ +K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \ +K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \ +N30, N31, K32, K33, K34, K35, K36, K37, N38, N39 \ +) \ +LAYOUT_ortho_4x10( \ +XXX, XXX, K37, K36, K35, K34, K33, K32, XXX, XXX, \ +K29, K28, K27, K26, K25, K24, K23, K22, K21, K20, \ +K19, K18, K17, K16, K15, K14, K13, K12, K11, K10, \ +K09, K08, K07, K06, K05, K04, K03, K02, K01, K00 \ +) +#else #define LAYOUT_miryoku(\ -K00, K01, K02, K03, K04, K05, K06, K07, K08, K09,\ -K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,\ -K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\ -N30, N31, K32, K33, K34, K35, K36, K37, N38, N39\ -)\ -LAYOUT_ortho_4x10(\ -K00, K01, K02, K03, K04, K05, K06, K07, K08, K09,\ -K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,\ -K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\ -KC_NO, KC_NO, K32, K33, K34, K35, K36, K37, KC_NO, KC_NO\ +K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \ +K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \ +K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \ +N30, N31, K32, K33, K34, K35, K36, K37, N38, N39 \ +) \ +LAYOUT_ortho_4x10( \ +K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \ +K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \ +K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \ +XXX, XXX, K32, K33, K34, K35, K36, K37, XXX, XXX \ ) +#endif diff --git a/layouts/community/ortho_4x10/manna-harbour_miryoku/keymap.c b/layouts/community/ortho_4x10/manna-harbour_miryoku/keymap.c index 1520387e88..7c5717a0fe 100644 --- a/layouts/community/ortho_4x10/manna-harbour_miryoku/keymap.c +++ b/layouts/community/ortho_4x10/manna-harbour_miryoku/keymap.c @@ -1,5 +1,5 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/layouts/community/ortho_4x12/manna-harbour_miryoku/config.h b/layouts/community/ortho_4x12/manna-harbour_miryoku/config.h index 8ccab4da9f..5d7ccd257f 100644 --- a/layouts/community/ortho_4x12/manna-harbour_miryoku/config.h +++ b/layouts/community/ortho_4x12/manna-harbour_miryoku/config.h @@ -1,6 +1,6 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/layouts/community/ortho_4x12/manna-harbour_miryoku/keymap.c b/layouts/community/ortho_4x12/manna-harbour_miryoku/keymap.c index 1520387e88..7c5717a0fe 100644 --- a/layouts/community/ortho_4x12/manna-harbour_miryoku/keymap.c +++ b/layouts/community/ortho_4x12/manna-harbour_miryoku/keymap.c @@ -1,5 +1,5 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/layouts/community/ortho_5x12/manna-harbour_miryoku/config.h b/layouts/community/ortho_5x12/manna-harbour_miryoku/config.h index 86b854db5c..927567fe4b 100644 --- a/layouts/community/ortho_5x12/manna-harbour_miryoku/config.h +++ b/layouts/community/ortho_5x12/manna-harbour_miryoku/config.h @@ -1,6 +1,6 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/layouts/community/ortho_5x12/manna-harbour_miryoku/keymap.c b/layouts/community/ortho_5x12/manna-harbour_miryoku/keymap.c index 1520387e88..7c5717a0fe 100644 --- a/layouts/community/ortho_5x12/manna-harbour_miryoku/keymap.c +++ b/layouts/community/ortho_5x12/manna-harbour_miryoku/keymap.c @@ -1,5 +1,5 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/layouts/community/ortho_5x15/manna-harbour_miryoku/config.h b/layouts/community/ortho_5x15/manna-harbour_miryoku/config.h index f9ccbdf2df..42e0385169 100644 --- a/layouts/community/ortho_5x15/manna-harbour_miryoku/config.h +++ b/layouts/community/ortho_5x15/manna-harbour_miryoku/config.h @@ -1,6 +1,6 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/layouts/community/ortho_5x15/manna-harbour_miryoku/keymap.c b/layouts/community/ortho_5x15/manna-harbour_miryoku/keymap.c index 1520387e88..7c5717a0fe 100644 --- a/layouts/community/ortho_5x15/manna-harbour_miryoku/keymap.c +++ b/layouts/community/ortho_5x15/manna-harbour_miryoku/keymap.c @@ -1,5 +1,5 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/layouts/community/planck_mit/manna-harbour_miryoku/config.h b/layouts/community/planck_mit/manna-harbour_miryoku/config.h index c1024d8012..df24fbba0f 100644 --- a/layouts/community/planck_mit/manna-harbour_miryoku/config.h +++ b/layouts/community/planck_mit/manna-harbour_miryoku/config.h @@ -1,6 +1,6 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/layouts/community/planck_mit/manna-harbour_miryoku/keymap.c b/layouts/community/planck_mit/manna-harbour_miryoku/keymap.c index 1520387e88..7c5717a0fe 100644 --- a/layouts/community/planck_mit/manna-harbour_miryoku/keymap.c +++ b/layouts/community/planck_mit/manna-harbour_miryoku/keymap.c @@ -1,5 +1,5 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/layouts/community/split_3x5_3/manna-harbour_miryoku/config.h b/layouts/community/split_3x5_3/manna-harbour_miryoku/config.h index ad9495a934..b34f6ad18d 100644 --- a/layouts/community/split_3x5_3/manna-harbour_miryoku/config.h +++ b/layouts/community/split_3x5_3/manna-harbour_miryoku/config.h @@ -1,6 +1,6 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/layouts/community/split_3x5_3/manna-harbour_miryoku/keymap.c b/layouts/community/split_3x5_3/manna-harbour_miryoku/keymap.c index 1520387e88..7c5717a0fe 100644 --- a/layouts/community/split_3x5_3/manna-harbour_miryoku/keymap.c +++ b/layouts/community/split_3x5_3/manna-harbour_miryoku/keymap.c @@ -1,5 +1,5 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/layouts/community/split_3x6_3/manna-harbour_miryoku/config.h b/layouts/community/split_3x6_3/manna-harbour_miryoku/config.h index f21188f333..4ce96c7600 100644 --- a/layouts/community/split_3x6_3/manna-harbour_miryoku/config.h +++ b/layouts/community/split_3x6_3/manna-harbour_miryoku/config.h @@ -1,6 +1,6 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/layouts/community/split_3x6_3/manna-harbour_miryoku/keymap.c b/layouts/community/split_3x6_3/manna-harbour_miryoku/keymap.c index 1520387e88..7c5717a0fe 100644 --- a/layouts/community/split_3x6_3/manna-harbour_miryoku/keymap.c +++ b/layouts/community/split_3x6_3/manna-harbour_miryoku/keymap.c @@ -1,5 +1,5 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/users/manna-harbour_miryoku/README.org b/users/manna-harbour_miryoku/README.org deleted file mode 120000 index b6caaade16..0000000000 --- a/users/manna-harbour_miryoku/README.org +++ /dev/null @@ -1 +0,0 @@ -miryoku.org \ No newline at end of file diff --git a/users/manna-harbour_miryoku/config.h b/users/manna-harbour_miryoku/config.h index 38d363299e..d24f52edae 100644 --- a/users/manna-harbour_miryoku/config.h +++ b/users/manna-harbour_miryoku/config.h @@ -1,6 +1,6 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . diff --git a/users/manna-harbour_miryoku/manna-harbour_miryoku.c b/users/manna-harbour_miryoku/manna-harbour_miryoku.c index ff25b77934..6347183417 100644 --- a/users/manna-harbour_miryoku/manna-harbour_miryoku.c +++ b/users/manna-harbour_miryoku/manna-harbour_miryoku.c @@ -1,6 +1,6 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . @@ -9,40 +9,50 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { #if defined MIRYOKU_LAYERS_FLIP [BASE] = LAYOUT_miryoku( - #if defined MIRYOKU_ALPHAS_COLEMAK + #if defined MIRYOKU_ALPHAS_AZERTY + KC_A, KC_Z, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, + LGUI_T(KC_Q), LALT_T(KC_S), LCTL_T(KC_D), LSFT_T(KC_F), KC_G, KC_H, LSFT_T(KC_J), LCTL_T(KC_K), LALT_T(KC_L), LGUI_T(KC_M), + LT(BUTTON, KC_W), ALGR_T(KC_X), KC_C, KC_V, KC_B, KC_N, KC_COMM, KC_DOT, ALGR_T(KC_SLSH), LT(BUTTON, KC_QUOT), + U_NP, U_NP, LT(FUN, KC_DEL), LT(NUM, KC_BSPC), LT(SYM, KC_ENT), LT(MOUSE, KC_TAB), LT(NAV, KC_SPC), LT(MEDIA, KC_ESC), U_NP, U_NP + #elif defined MIRYOKU_ALPHAS_COLEMAK KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_QUOT, LGUI_T(KC_A), LALT_T(KC_R), LCTL_T(KC_S), LSFT_T(KC_T), KC_D, KC_H, LSFT_T(KC_N), LCTL_T(KC_E), LALT_T(KC_I), LGUI_T(KC_O), - KC_Z, ALGR_T(KC_X), KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, ALGR_T(KC_DOT), KC_SLSH, + LT(BUTTON, KC_Z), ALGR_T(KC_X), KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, ALGR_T(KC_DOT), LT(BUTTON, KC_SLSH), U_NP, U_NP, LT(FUN, KC_DEL), LT(NUM, KC_BSPC), LT(SYM, KC_ENT), LT(MOUSE, KC_TAB), LT(NAV, KC_SPC), LT(MEDIA, KC_ESC), U_NP, U_NP #elif defined MIRYOKU_ALPHAS_COLEMAKDHK KC_Q, KC_W, KC_F, KC_P, KC_B, KC_J, KC_L, KC_U, KC_Y, KC_QUOT, LGUI_T(KC_A), LALT_T(KC_R), LCTL_T(KC_S), LSFT_T(KC_T), KC_G, KC_K, LSFT_T(KC_N), LCTL_T(KC_E), LALT_T(KC_I), LGUI_T(KC_O), - KC_Z, ALGR_T(KC_X), KC_C, KC_D, KC_V, KC_M, KC_H, KC_COMM, ALGR_T(KC_DOT), KC_SLSH, + LT(BUTTON, KC_Z), ALGR_T(KC_X), KC_C, KC_D, KC_V, KC_M, KC_H, KC_COMM, ALGR_T(KC_DOT), LT(BUTTON, KC_SLSH), U_NP, U_NP, LT(FUN, KC_DEL), LT(NUM, KC_BSPC), LT(SYM, KC_ENT), LT(MOUSE, KC_TAB), LT(NAV, KC_SPC), LT(MEDIA, KC_ESC), U_NP, U_NP #elif defined MIRYOKU_ALPHAS_DVORAK KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, LGUI_T(KC_A), LALT_T(KC_O), LCTL_T(KC_E), LSFT_T(KC_U), KC_I, KC_D, LSFT_T(KC_H), LCTL_T(KC_T), LALT_T(KC_N), LGUI_T(KC_S), - KC_SLSH, ALGR_T(KC_Q), KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, ALGR_T(KC_V), KC_Z, + LT(BUTTON, KC_SLSH), ALGR_T(KC_Q), KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, ALGR_T(KC_V), LT(BUTTON, KC_Z), U_NP, U_NP, LT(FUN, KC_DEL), LT(NUM, KC_BSPC), LT(SYM, KC_ENT), LT(MOUSE, KC_TAB), LT(NAV, KC_SPC), LT(MEDIA, KC_ESC), U_NP, U_NP #elif defined MIRYOKU_ALPHAS_HALMAK KC_W, KC_L, KC_R, KC_B, KC_Z, KC_QUOT, KC_Q, KC_U, KC_D, KC_J, LGUI_T(KC_S), LALT_T(KC_H), LCTL_T(KC_N), LSFT_T(KC_T), KC_COMM, KC_DOT, LSFT_T(KC_A), LCTL_T(KC_E), LALT_T(KC_O), LGUI_T(KC_I), - KC_F, ALGR_T(KC_M), KC_V, KC_C, KC_SLSH, KC_G, KC_P, KC_X, ALGR_T(KC_K), KC_Y, + LT(BUTTON, KC_F), ALGR_T(KC_M), KC_V, KC_C, KC_SLSH, KC_G, KC_P, KC_X, ALGR_T(KC_K), LT(BUTTON, KC_Y), U_NP, U_NP, LT(FUN, KC_DEL), LT(NUM, KC_BSPC), LT(SYM, KC_ENT), LT(MOUSE, KC_TAB), LT(NAV, KC_SPC), LT(MEDIA, KC_ESC), U_NP, U_NP #elif defined MIRYOKU_ALPHAS_WORKMAN KC_Q, KC_D, KC_R, KC_W, KC_B, KC_J, KC_F, KC_U, KC_P, KC_QUOT, LGUI_T(KC_A), LALT_T(KC_S), LCTL_T(KC_H), LSFT_T(KC_T), KC_G, KC_Y, LSFT_T(KC_N), LCTL_T(KC_E), LALT_T(KC_O), LGUI_T(KC_I), - KC_Z, ALGR_T(KC_X), KC_M, KC_C, KC_V, KC_K, KC_L, KC_COMM, ALGR_T(KC_DOT), KC_SLSH, + LT(BUTTON, KC_Z), ALGR_T(KC_X), KC_M, KC_C, KC_V, KC_K, KC_L, KC_COMM, ALGR_T(KC_DOT), LT(BUTTON, KC_SLSH), U_NP, U_NP, LT(FUN, KC_DEL), LT(NUM, KC_BSPC), LT(SYM, KC_ENT), LT(MOUSE, KC_TAB), LT(NAV, KC_SPC), LT(MEDIA, KC_ESC), U_NP, U_NP #elif defined MIRYOKU_ALPHAS_QWERTY KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, LGUI_T(KC_A), LALT_T(KC_S), LCTL_T(KC_D), LSFT_T(KC_F), KC_G, KC_H, LSFT_T(KC_J), LCTL_T(KC_K), LALT_T(KC_L), LGUI_T(KC_QUOT), - KC_Z, ALGR_T(KC_X), KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, ALGR_T(KC_DOT), KC_SLSH, + LT(BUTTON, KC_Z), ALGR_T(KC_X), KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, ALGR_T(KC_DOT), LT(BUTTON, KC_SLSH), + U_NP, U_NP, LT(FUN, KC_DEL), LT(NUM, KC_BSPC), LT(SYM, KC_ENT), LT(MOUSE, KC_TAB), LT(NAV, KC_SPC), LT(MEDIA, KC_ESC), U_NP, U_NP + #elif defined MIRYOKU_ALPHAS_QWERTZ + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Z, KC_U, KC_I, KC_O, KC_P, + LGUI_T(KC_A), LALT_T(KC_S), LCTL_T(KC_D), LSFT_T(KC_F), KC_G, KC_H, LSFT_T(KC_J), LCTL_T(KC_K), LALT_T(KC_L), LGUI_T(KC_QUOT), + LT(BUTTON, KC_Y), ALGR_T(KC_X), KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, ALGR_T(KC_DOT), LT(BUTTON, KC_SLSH), U_NP, U_NP, LT(FUN, KC_DEL), LT(NUM, KC_BSPC), LT(SYM, KC_ENT), LT(MOUSE, KC_TAB), LT(NAV, KC_SPC), LT(MEDIA, KC_ESC), U_NP, U_NP #else KC_Q, KC_W, KC_F, KC_P, KC_B, KC_J, KC_L, KC_U, KC_Y, KC_QUOT, LGUI_T(KC_A), LALT_T(KC_R), LCTL_T(KC_S), LSFT_T(KC_T), KC_G, KC_M, LSFT_T(KC_N), LCTL_T(KC_E), LALT_T(KC_I), LGUI_T(KC_O), - KC_Z, ALGR_T(KC_X), KC_C, KC_D, KC_V, KC_K, KC_H, KC_COMM, ALGR_T(KC_DOT), KC_SLSH, + LT(BUTTON, KC_Z), ALGR_T(KC_X), KC_C, KC_D, KC_V, KC_K, KC_H, KC_COMM, ALGR_T(KC_DOT), LT(BUTTON, KC_SLSH), U_NP, U_NP, LT(FUN, KC_DEL), LT(NUM, KC_BSPC), LT(SYM, KC_ENT), LT(MOUSE, KC_TAB), LT(NAV, KC_SPC), LT(MEDIA, KC_ESC), U_NP, U_NP #endif ), @@ -85,12 +95,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { U_NP, U_NP, KC_MUTE, KC_MPLY, KC_MSTP, U_NA, U_NA, U_NA, U_NP, U_NP ), #endif - [MBO] = LAYOUT_miryoku( - U_RDO, U_PST, U_CPY, U_CUT, U_UND, U_RDO, U_PST, U_CPY, U_CUT, U_UND, - KC_LGUI, KC_LALT, KC_LCTL, KC_LSFT, KC_TRNS, KC_TRNS, KC_LSFT, KC_LCTL, KC_LALT, KC_LGUI, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - U_NP, U_NP, KC_BTN2, KC_BTN3, KC_BTN1, KC_BTN1, KC_BTN3, KC_BTN2, U_NP, U_NP - ), [NUM] = LAYOUT_miryoku( RESET, U_NA, U_NA, U_NA, U_NA, KC_LBRC, KC_7, KC_8, KC_9, KC_RBRC, KC_LGUI, KC_LALT, KC_LCTL, KC_LSFT, U_NA, KC_EQL, KC_4, KC_5, KC_6, KC_SCLN, @@ -108,44 +112,53 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LGUI, KC_LALT, KC_LCTL, KC_LSFT, U_NA, KC_SLCK, KC_F4, KC_F5, KC_F6, KC_F11, U_NA, KC_ALGR, U_NA, U_NA, U_NA, KC_PAUS, KC_F1, KC_F2, KC_F3, KC_F10, U_NP, U_NP, U_NA, U_NA, U_NA, KC_TAB, KC_SPC, KC_APP, U_NP, U_NP - ) -, + ), #else [BASE] = LAYOUT_miryoku( - #if defined MIRYOKU_ALPHAS_COLEMAK + #if defined MIRYOKU_ALPHAS_AZERTY + KC_A, KC_Z, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, + LGUI_T(KC_Q), LALT_T(KC_S), LCTL_T(KC_D), LSFT_T(KC_F), KC_G, KC_H, LSFT_T(KC_J), LCTL_T(KC_K), LALT_T(KC_L), LGUI_T(KC_M), + LT(BUTTON, KC_W), ALGR_T(KC_X), KC_C, KC_V, KC_B, KC_N, KC_COMM, KC_DOT, ALGR_T(KC_SLSH), LT(BUTTON, KC_QUOT), + U_NP, U_NP, LT(MEDIA, KC_ESC), LT(NAV, KC_SPC), LT(MOUSE, KC_TAB), LT(SYM, KC_ENT), LT(NUM, KC_BSPC), LT(FUN, KC_DEL), U_NP, U_NP + #elif defined MIRYOKU_ALPHAS_COLEMAK KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_QUOT, LGUI_T(KC_A), LALT_T(KC_R), LCTL_T(KC_S), LSFT_T(KC_T), KC_D, KC_H, LSFT_T(KC_N), LCTL_T(KC_E), LALT_T(KC_I), LGUI_T(KC_O), - KC_Z, ALGR_T(KC_X), KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, ALGR_T(KC_DOT), KC_SLSH, + LT(BUTTON, KC_Z), ALGR_T(KC_X), KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, ALGR_T(KC_DOT), LT(BUTTON, KC_SLSH), U_NP, U_NP, LT(MEDIA, KC_ESC), LT(NAV, KC_SPC), LT(MOUSE, KC_TAB), LT(SYM, KC_ENT), LT(NUM, KC_BSPC), LT(FUN, KC_DEL), U_NP, U_NP #elif defined MIRYOKU_ALPHAS_COLEMAKDHK KC_Q, KC_W, KC_F, KC_P, KC_B, KC_J, KC_L, KC_U, KC_Y, KC_QUOT, LGUI_T(KC_A), LALT_T(KC_R), LCTL_T(KC_S), LSFT_T(KC_T), KC_G, KC_K, LSFT_T(KC_N), LCTL_T(KC_E), LALT_T(KC_I), LGUI_T(KC_O), - KC_Z, ALGR_T(KC_X), KC_C, KC_D, KC_V, KC_M, KC_H, KC_COMM, ALGR_T(KC_DOT), KC_SLSH, + LT(BUTTON, KC_Z), ALGR_T(KC_X), KC_C, KC_D, KC_V, KC_M, KC_H, KC_COMM, ALGR_T(KC_DOT), LT(BUTTON, KC_SLSH), U_NP, U_NP, LT(MEDIA, KC_ESC), LT(NAV, KC_SPC), LT(MOUSE, KC_TAB), LT(SYM, KC_ENT), LT(NUM, KC_BSPC), LT(FUN, KC_DEL), U_NP, U_NP #elif defined MIRYOKU_ALPHAS_DVORAK KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, LGUI_T(KC_A), LALT_T(KC_O), LCTL_T(KC_E), LSFT_T(KC_U), KC_I, KC_D, LSFT_T(KC_H), LCTL_T(KC_T), LALT_T(KC_N), LGUI_T(KC_S), - KC_SLSH, ALGR_T(KC_Q), KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, ALGR_T(KC_V), KC_Z, + LT(BUTTON, KC_SLSH), ALGR_T(KC_Q), KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, ALGR_T(KC_V), LT(BUTTON, KC_Z), U_NP, U_NP, LT(MEDIA, KC_ESC), LT(NAV, KC_SPC), LT(MOUSE, KC_TAB), LT(SYM, KC_ENT), LT(NUM, KC_BSPC), LT(FUN, KC_DEL), U_NP, U_NP #elif defined MIRYOKU_ALPHAS_HALMAK KC_W, KC_L, KC_R, KC_B, KC_Z, KC_QUOT, KC_Q, KC_U, KC_D, KC_J, LGUI_T(KC_S), LALT_T(KC_H), LCTL_T(KC_N), LSFT_T(KC_T), KC_COMM, KC_DOT, LSFT_T(KC_A), LCTL_T(KC_E), LALT_T(KC_O), LGUI_T(KC_I), - KC_F, ALGR_T(KC_M), KC_V, KC_C, KC_SLSH, KC_G, KC_P, KC_X, ALGR_T(KC_K), KC_Y, + LT(BUTTON, KC_F), ALGR_T(KC_M), KC_V, KC_C, KC_SLSH, KC_G, KC_P, KC_X, ALGR_T(KC_K), LT(BUTTON, KC_Y), U_NP, U_NP, LT(MEDIA, KC_ESC), LT(NAV, KC_SPC), LT(MOUSE, KC_TAB), LT(SYM, KC_ENT), LT(NUM, KC_BSPC), LT(FUN, KC_DEL), U_NP, U_NP #elif defined MIRYOKU_ALPHAS_WORKMAN KC_Q, KC_D, KC_R, KC_W, KC_B, KC_J, KC_F, KC_U, KC_P, KC_QUOT, LGUI_T(KC_A), LALT_T(KC_S), LCTL_T(KC_H), LSFT_T(KC_T), KC_G, KC_Y, LSFT_T(KC_N), LCTL_T(KC_E), LALT_T(KC_O), LGUI_T(KC_I), - KC_Z, ALGR_T(KC_X), KC_M, KC_C, KC_V, KC_K, KC_L, KC_COMM, ALGR_T(KC_DOT), KC_SLSH, + LT(BUTTON, KC_Z), ALGR_T(KC_X), KC_M, KC_C, KC_V, KC_K, KC_L, KC_COMM, ALGR_T(KC_DOT), LT(BUTTON, KC_SLSH), U_NP, U_NP, LT(MEDIA, KC_ESC), LT(NAV, KC_SPC), LT(MOUSE, KC_TAB), LT(SYM, KC_ENT), LT(NUM, KC_BSPC), LT(FUN, KC_DEL), U_NP, U_NP #elif defined MIRYOKU_ALPHAS_QWERTY KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, LGUI_T(KC_A), LALT_T(KC_S), LCTL_T(KC_D), LSFT_T(KC_F), KC_G, KC_H, LSFT_T(KC_J), LCTL_T(KC_K), LALT_T(KC_L), LGUI_T(KC_QUOT), - KC_Z, ALGR_T(KC_X), KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, ALGR_T(KC_DOT), KC_SLSH, + LT(BUTTON, KC_Z), ALGR_T(KC_X), KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, ALGR_T(KC_DOT), LT(BUTTON, KC_SLSH), + U_NP, U_NP, LT(MEDIA, KC_ESC), LT(NAV, KC_SPC), LT(MOUSE, KC_TAB), LT(SYM, KC_ENT), LT(NUM, KC_BSPC), LT(FUN, KC_DEL), U_NP, U_NP + #elif defined MIRYOKU_ALPHAS_QWERTZ + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Z, KC_U, KC_I, KC_O, KC_P, + LGUI_T(KC_A), LALT_T(KC_S), LCTL_T(KC_D), LSFT_T(KC_F), KC_G, KC_H, LSFT_T(KC_J), LCTL_T(KC_K), LALT_T(KC_L), LGUI_T(KC_QUOT), + LT(BUTTON, KC_Y), ALGR_T(KC_X), KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, ALGR_T(KC_DOT), LT(BUTTON, KC_SLSH), U_NP, U_NP, LT(MEDIA, KC_ESC), LT(NAV, KC_SPC), LT(MOUSE, KC_TAB), LT(SYM, KC_ENT), LT(NUM, KC_BSPC), LT(FUN, KC_DEL), U_NP, U_NP #else KC_Q, KC_W, KC_F, KC_P, KC_B, KC_J, KC_L, KC_U, KC_Y, KC_QUOT, LGUI_T(KC_A), LALT_T(KC_R), LCTL_T(KC_S), LSFT_T(KC_T), KC_G, KC_M, LSFT_T(KC_N), LCTL_T(KC_E), LALT_T(KC_I), LGUI_T(KC_O), - KC_Z, ALGR_T(KC_X), KC_C, KC_D, KC_V, KC_K, KC_H, KC_COMM, ALGR_T(KC_DOT), KC_SLSH, + LT(BUTTON, KC_Z), ALGR_T(KC_X), KC_C, KC_D, KC_V, KC_K, KC_H, KC_COMM, ALGR_T(KC_DOT), LT(BUTTON, KC_SLSH), U_NP, U_NP, LT(MEDIA, KC_ESC), LT(NAV, KC_SPC), LT(MOUSE, KC_TAB), LT(SYM, KC_ENT), LT(NUM, KC_BSPC), LT(FUN, KC_DEL), U_NP, U_NP #endif ), @@ -188,12 +201,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { U_NP, U_NP, U_NA, U_NA, U_NA, KC_MSTP, KC_MPLY, KC_MUTE, U_NP, U_NP ), #endif - [MBO] = LAYOUT_miryoku( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_LGUI, KC_LALT, KC_LCTL, KC_LSFT, KC_TRNS, KC_TRNS, KC_LSFT, KC_LCTL, KC_LALT, KC_LGUI, - U_RDO, U_PST, U_CPY, U_CUT, U_UND, U_RDO, U_PST, U_CPY, U_CUT, U_UND, - U_NP, U_NP, KC_BTN2, KC_BTN3, KC_BTN1, KC_BTN1, KC_BTN3, KC_BTN2, U_NP, U_NP - ), [NUM] = LAYOUT_miryoku( KC_LBRC, KC_7, KC_8, KC_9, KC_RBRC, U_NA, U_NA, U_NA, U_NA, RESET, KC_SCLN, KC_4, KC_5, KC_6, KC_EQL, U_NA, KC_LSFT, KC_LCTL, KC_LALT, KC_LGUI, @@ -211,6 +218,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_F11, KC_F4, KC_F5, KC_F6, KC_SLCK, U_NA, KC_LSFT, KC_LCTL, KC_LALT, KC_LGUI, KC_F10, KC_F1, KC_F2, KC_F3, KC_PAUS, U_NA, U_NA, U_NA, KC_ALGR, U_NA, U_NP, U_NP, KC_APP, KC_SPC, KC_TAB, U_NA, U_NA, U_NA, U_NP, U_NP - ) + ), #endif + [BUTTON] = LAYOUT_miryoku( + U_UND, U_CUT, U_CPY, U_PST, U_RDO, U_RDO, U_PST, U_CPY, U_CUT, U_UND, + KC_LGUI, KC_LALT, KC_LCTL, KC_LSFT, KC_TRNS, KC_TRNS, KC_LSFT, KC_LCTL, KC_LALT, KC_LGUI, + U_UND, U_CUT, U_CPY, U_PST, U_RDO, U_RDO, U_PST, U_CPY, U_CUT, U_UND, + U_NP, U_NP, KC_BTN2, KC_BTN3, KC_BTN1, KC_BTN1, KC_BTN3, KC_BTN2, U_NP, U_NP + ) }; diff --git a/users/manna-harbour_miryoku/manna-harbour_miryoku.h b/users/manna-harbour_miryoku/manna-harbour_miryoku.h index 4d62c17079..1d14f61710 100644 --- a/users/manna-harbour_miryoku/manna-harbour_miryoku.h +++ b/users/manna-harbour_miryoku/manna-harbour_miryoku.h @@ -1,6 +1,6 @@ // Copyright 2019 Manna Harbour // https://github.com/manna-harbour/miryoku -// generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +// generated -*- buffer-read-only: t -*- // This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . @@ -12,7 +12,7 @@ #define U_NA KC_NO // present but not available for use #define U_NU KC_NO // available but not used -enum layers { BASE, MBO, MEDIA, NAV, MOUSE, SYM, NUM, FUN }; +enum layers { BASE, BUTTON, MEDIA, NAV, MOUSE, SYM, NUM, FUN }; #if defined MIRYOKU_CLIPBOARD_FUN #define U_RDO KC_AGIN diff --git a/users/manna-harbour_miryoku/miryoku.org b/users/manna-harbour_miryoku/readme.org similarity index 79% rename from users/manna-harbour_miryoku/miryoku.org rename to users/manna-harbour_miryoku/readme.org index 2f6b1d5a88..b904738a67 100644 --- a/users/manna-harbour_miryoku/miryoku.org +++ b/users/manna-harbour_miryoku/readme.org @@ -1,100 +1,41 @@ # After making changes to code or tables call org-babel-tangle (C-c C-v t). -#+Title: Miryoku [[https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/logos/miryoku-roa-32.png]] +* Miryoku QMK [[https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/logos/miryoku-roa-32.png]] [[https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/cover/miryoku-kle-cover.png]] -Miryoku is an ergonomic, minimal, orthogonal layout for ergo or ortho keyboards, -implemented as part of the QMK firmware. +[[https://github.com/manna-harbour/miryoku/][Miryoku]] is an ergonomic, minimal, orthogonal, and universal keyboard layout. This is the Miryoku implementation for [[https://qmk.fm][QMK]]. -The layout is maintained in emacs org-mode tables and converted to QMK keymap -data structures using embedded python scripts. It is mapped onto keyboards with -different physical layouts as a subset without code duplication using the QMK -userspace feature and C macros. +** Branches + + +*** QMK master + +Miryoku QMK is periodically merged upstream into QMK master and it is generally recommended to build directly from QMK master. + +QMK master is at https://github.com/qmk/qmk_firmware/tree/master, and the corresponding Miryoku QMK readme is at https://github.com/qmk/qmk_firmware/tree/master/users/manna-harbour_miryoku. + + +*** Miryoku QMK development branch + +The Miryoku QMK development branch is ~miryoku~ and may contain new commits not yet merged into QMK master. -Please see the [[https://github.com/manna-harbour/qmk_firmware/blob/miryoku/users/manna-harbour_miryoku/miryoku.org][development branch]] for any [[https://github.com/qmk/qmk_firmware/compare/master...manna-harbour:miryoku][updates not yet merged into QMK]]. +~miryoku~ is at https://github.com/manna-harbour/miryoku_qmk/tree/miryoku, and the corresponding Miryoku QMK readme is at https://github.com/manna-harbour/miryoku_qmk/tree/miryoku/users/manna-harbour_miryoku. -To checkout the development branch in your existing QMK build environment: +New commits can be seen at the top of the [[https://github.com/manna-harbour/miryoku_qmk/commits/miryoku][history]] with commit messages beginning ~[miryoku]~. After the new commits are squashed and merged upstream into QMK master by pull request the ~miryoku~ branch is renamed and a new ~miryoku~ branch is created from QMK master. + +To checkout the ~miryoku~ branch in your existing QMK build environment: #+BEGIN_SRC sh :tangle no -git remote add manna-harbour git@github.com:manna-harbour/qmk_firmware.git # ssh -git remote add manna-harbour https://github.com/manna-harbour/qmk_firmware.git # https -git fetch manna-harbour -git checkout --track manna-harbour/miryoku -#+END_SRC - -Additional implementations and visualisations are provided outside QMK in the -[[https://github.com/manna-harbour/miryoku/blob/master/README.org][Miryoku (Extras) repository]]. - - -* Contents :TOC_3: -- [[#layout][Layout]] - - [[#general-principles][General Principles]] - - [[#details][Details]] - - [[#layers][Layers]] - - [[#base][Base]] - - [[#nav][Nav]] - - [[#mouse][Mouse]] - - [[#mouse-buttons-overlay][Mouse Buttons Overlay]] - - [[#media][Media]] - - [[#num][Num]] - - [[#sym][Sym]] - - [[#fun][Fun]] - - [[#alternative-layouts][Alternative Layouts]] -- [[#code-generation][Code Generation]] - - [[#table-conversion-scripts][Table Conversion Scripts]] - - [[#table-layout-taphold][table-layout-taphold]] - - [[#table-layout-half][table-layout-half]] - - [[#table-layout-full][table-layout-full]] - - [[#table-enums][table-enums]] - - [[#table-keycode-mappings][table-keycode-mappings]] - - [[#data][Data]] - - [[#symbol-names][symbol-names]] - - [[#mods][mods]] - - [[#nonkc][nonkc]] - - [[#header][header]] - - [[#license-qmk][license-qmk]] -- [[#subset-mapping][Subset Mapping]] - - [[#userspace][Userspace]] - - [[#usersmanna-harbour_miryokurulesmk][users/manna-harbour_miryoku/rules.mk]] - - [[#usersmanna-harbour_miryokuconfigh][users/manna-harbour_miryoku/config.h]] - - [[#usersmanna-harbour_miryokumanna-harbour_miryokuh][users/manna-harbour_miryoku/manna-harbour_miryoku.h]] - - [[#usersmanna-harbour_miryokumanna-harbour_miryokuc][users/manna-harbour_miryoku/manna-harbour_miryoku.c]] - - [[#layouts][Layouts]] - - [[#60_ansi][60_ansi]] - - [[#ergodox][ergodox]] - - [[#ortho_4x10][ortho_4x10]] - - [[#ortho_4x12][ortho_4x12]] - - [[#ortho_5x12][ortho_5x12]] - - [[#ortho_5x15][ortho_5x15]] - - [[#planck_mit][planck_mit]] - - [[#split_3x5_3][split_3x5_3]] - - [[#split_3x6_3][split_3x6_3]] - - [[#keyboards][Keyboards]] - - [[#atreus][atreus]] - - [[#ergotravel][ergotravel]] - - [[#for_science][for_science]] - - [[#gergo][gergo]] - - [[#handwireddactyl_manuform4x5][handwired/dactyl_manuform/4x5]] - - [[#handwireddactyl_manuform5x6][handwired/dactyl_manuform/5x6]] - - [[#keebioiris][keebio/iris]] - - [[#keyboardioatreus][keyboardio/atreus]] - - [[#kyria][kyria]] - - [[#lily58][lily58]] - - [[#moonlander][moonlander]] - - [[#redox_w][redox_w]] - - [[#sofle][sofle]] - - [[#torn][torn]] - - [[#customisation][Customisation]] - - [[#examples][Examples]] -- [[#experimental-features][Experimental Features]] - - [[#bilateral-combinations][Bilateral Combinations]] - - [[#retro-shift][Retro Shift]] -- [[#documentation][Documentation]] -- [[#contact][Contact]] - -* Layout - -** General Principles +git remote add miryoku_qmk git@github.com:manna-harbour/miryoku_qmk.git # if using SSH +git remote add miryoku_qmk https://github.com/manna-harbour/miryoku_qmk.git # if using HTTPS +git fetch miryoku_qmk +git checkout --track miryoku_qmk/miryoku +#+END_SRC + + +** Layout + +*** General Principles - Use layers instead of reaching. - Use both hands instead of contortions. @@ -103,7 +44,7 @@ Additional implementations and visualisations are provided outside QMK in the - Avoid unnecessary complication. -** Details +*** Details - 5 columns, 3 rows, 3 thumb keys, 2 hands. - Can be used on almost any split or non-split ergo or ortho keyboard. @@ -133,7 +74,7 @@ Additional implementations and visualisations are provided outside QMK in the - Auto Shift for numbers and symbols. -** Layers +*** Layers [[https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/layers/miryoku-kle-reference.png]] @@ -153,7 +94,7 @@ Mods (and reset) will be available on sub layers on the same hand as the layer change thumb key. Unknown names are considered to be layer names. -*** Base +**** Base [[https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/layers/miryoku-kle-base.png]] @@ -164,10 +105,10 @@ backspace, enter, delete on the right and space, tab, escape on the left. Alternative alpha arrangements are also available. -**** Tap +***** Tap -***** Alphas +****** Alphas #+NAME: colemakdh | Q | W | F | P | B | J | L | U | Y | ' | @@ -175,22 +116,22 @@ Alternative alpha arrangements are also available. | Z | X | C | D | V | K | H | , | DOT | / | -***** Thumbs +****** Thumbs #+NAME: thumbs | U_NP | U_NP | ESC | SPC | TAB | ENT | BSPC | DEL | U_NP | U_NP | -**** Hold +***** Hold #+NAME: hold -| RESET | | | | | | | | | RESET | -| LGUI | LALT | LCTL | LSFT | | | LSFT | LCTL | LALT | LGUI | -| | ALGR | | | | | | | ALGR | | -| U_NP | U_NP | MEDIA | NAV | MOUSE | SYM | NUM | FUN | U_NP | U_NP | +| RESET | | | | | | | | | RESET | +| LGUI | LALT | LCTL | LSFT | | | LSFT | LCTL | LALT | LGUI | +| BUTTON | ALGR | | | | | | | ALGR | BUTTON | +| U_NP | U_NP | MEDIA | NAV | MOUSE | SYM | NUM | FUN | U_NP | U_NP | -*** Nav +**** Nav [[https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/layers/miryoku-kle-nav.png]] @@ -209,7 +150,7 @@ available. | ENT | BSPC | DEL | U_NP | U_NP | -*** Mouse +**** Mouse [[https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/layers/miryoku-kle-mouse.png]] @@ -226,19 +167,24 @@ layer. | BTN1 | BTN3 | BTN2 | U_NP | U_NP | -*** Mouse Buttons Overlay +**** Button -Available for automatic activation depending on keyboard hardware and -configuration. Not activated manually. +[[https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/layers/miryoku-kle-button.png]] -#+NAME: mbo -| U_RDO | U_PST | U_CPY | U_CUT | U_UND | U_RDO | U_PST | U_CPY | U_CUT | U_UND | +Provides mouse buttons, mods, and clipboard keys for use with integrated or +external pointing devices, used with either hand. The layer is available for +automatic activation depending on hardware and configuration. It can also be +activated manually by holding a bottom row pinkie key (however GUI and Undo will +be unavailable). + +#+NAME: button +| U_UND | U_CUT | U_CPY | U_PST | U_RDO | U_RDO | U_PST | U_CPY | U_CUT | U_UND | | LGUI | LALT | LCTL | LSFT | | | LSFT | LCTL | LALT | LGUI | -| | | | | | | | | | | +| U_UND | U_CUT | U_CPY | U_PST | U_RDO | U_RDO | U_PST | U_CPY | U_CUT | U_UND | | U_NP | U_NP | BTN2 | BTN3 | BTN1 | BTN1 | BTN3 | BTN2 | U_NP | U_NP | -*** Media +**** Media [[https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/layers/miryoku-kle-media.png]] @@ -254,7 +200,7 @@ available for other related functions. | MSTP | MPLY | MUTE | U_NP | U_NP | -*** Num +**** Num [[https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/layers/miryoku-kle-num.png]] @@ -269,7 +215,7 @@ Dot is duplicated from the base layer. | U_NP | U_NP | DOT | 0 | MINS | -*** Sym +**** Sym [[https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/layers/miryoku-kle-sym.png]] @@ -284,7 +230,7 @@ next to close parenthesis. | U_NP | U_NP | ( | ) | _ | -*** Fun +**** Fun [[https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/layers/miryoku-kle-fun.png]] @@ -301,19 +247,29 @@ the base layer to enable auto-repeat. | U_NP | U_NP | APP | SPC | TAB | -*** Alternative Layouts +**** Alternative Layouts The defaults are recommended, but alternative layouts are provided to accommodate existing muscle memory and platform differences. -**** Alphas +***** Alphas To select, append the corresponding option to the ~make~ command line when building, e.g. ~MIRYOKU_ALPHAS=QWERTY~. -***** Colemak +****** AZERTY + +~MIRYOKU_ALPHAS=AZERTY~ + +#+NAME: azerty +| A | Z | E | R | T | Y | U | I | O | P | +| Q | S | D | F | G | H | J | K | L | M | +| W | X | C | V | B | N | , | DOT | / | ' | + + +****** Colemak ~MIRYOKU_ALPHAS=COLEMAK~ @@ -323,7 +279,7 @@ building, e.g. ~MIRYOKU_ALPHAS=QWERTY~. | Z | X | C | V | B | K | M | , | DOT | / | -***** Colemak Mod-DHk +****** Colemak Mod-DHk ~MIRYOKU_ALPHAS=COLEMAKDHK~ @@ -333,7 +289,7 @@ building, e.g. ~MIRYOKU_ALPHAS=QWERTY~. | Z | X | C | D | V | M | H | , | DOT | / | -***** Dvorak +****** Dvorak ~MIRYOKU_ALPHAS=DVORAK~ @@ -343,7 +299,7 @@ building, e.g. ~MIRYOKU_ALPHAS=QWERTY~. | / | Q | J | K | X | B | M | W | V | Z | -***** Halmak +****** Halmak ~MIRYOKU_ALPHAS=HALMAK~ @@ -353,7 +309,7 @@ building, e.g. ~MIRYOKU_ALPHAS=QWERTY~. | F | M | V | C | / | G | P | X | K | Y | -***** Workman +****** Workman ~MIRYOKU_ALPHAS=WORKMAN~ @@ -363,7 +319,7 @@ building, e.g. ~MIRYOKU_ALPHAS=QWERTY~. | Z | X | M | C | V | K | L | , | DOT | / | -***** QWERTY +****** QWERTY ~MIRYOKU_ALPHAS=QWERTY~ @@ -373,16 +329,26 @@ building, e.g. ~MIRYOKU_ALPHAS=QWERTY~. | Z | X | C | V | B | N | M | , | DOT | / | -**** Nav +****** QWERTZ + +~MIRYOKU_ALPHAS=QWERTZ~ + +#+NAME: qwertz +| Q | W | E | R | T | Z | U | I | O | P | +| A | S | D | F | G | H | J | K | L | ' | +| Y | X | C | V | B | N | M | , | DOT | / | -***** vi-Style +***** Nav + + +****** vi-Style To select, append ~MIRYOKU_NAV=VI~ to the ~make~ command line when building. Not available with ~MIRYOKU_LAYERS=FLIP~. -****** Nav +******* Nav #+NAME: nav-r-vi | U_RDO | U_PST | U_CPY | U_CUT | U_UND | @@ -391,7 +357,7 @@ Not available with ~MIRYOKU_LAYERS=FLIP~. | ENT | BSPC | DEL | U_NP | U_NP | -****** Mouse +******* Mouse #+NAME: mouse-r-vi | U_RDO | U_PST | U_CPY | U_CUT | U_UND | @@ -400,7 +366,7 @@ Not available with ~MIRYOKU_LAYERS=FLIP~. | BTN1 | BTN3 | BTN2 | U_NP | U_NP | -****** Media +******* Media #+NAME: media-r-vi | RGB_TOG | RGB_MOD | RGB_HUI | RGB_SAI | RGB_VAI | @@ -409,7 +375,7 @@ Not available with ~MIRYOKU_LAYERS=FLIP~. | MSTP | MPLY | MUTE | U_NP | U_NP | -***** Inverted-T +****** Inverted-T [[https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/layers/miryoku-kle-reference-flip-invertedt.png]] @@ -417,7 +383,7 @@ To select, append ~MIRYOKU_NAV=INVERTEDT~ to the ~make~ command line when building. Only available with ~MIRYOKU_LAYERS=FLIP~. -****** Nav +******* Nav #+NAME: nav-l-invertedt | PGUP | HOME | UP | END | INS | @@ -426,7 +392,7 @@ building. Only available with ~MIRYOKU_LAYERS=FLIP~. | U_NP | U_NP | DEL | BSPC | ENT | -****** Mouse +******* Mouse #+NAME: mouse-l-invertedt | WH_U | WH_L | MS_U | WH_R | | @@ -435,7 +401,7 @@ building. Only available with ~MIRYOKU_LAYERS=FLIP~. | U_NP | U_NP | BTN2 | BTN3 | BTN1 | -****** Media +******* Media #+NAME: media-l-invertedt | | | VOLU | | | @@ -444,7 +410,7 @@ building. Only available with ~MIRYOKU_LAYERS=FLIP~. | U_NP | U_NP | MUTE | MPLY | MSTP | -**** Clipboard +***** Clipboard Keycodes are translated according to the following tables. @@ -457,7 +423,7 @@ To select, append the corresponding option to the ~make~ command line when building, e.g. ~MIRYOKU_CLIPBOARD=WIN~. -***** Default +****** Default #+NAME: clipboard | U_RDO | AGIN | @@ -467,7 +433,7 @@ building, e.g. ~MIRYOKU_CLIPBOARD=WIN~. | U_UND | UNDO | -***** Fun Cluster +****** Fun Cluster ~MIRYOKU_CLIPBOARD=FUN~ @@ -479,7 +445,7 @@ building, e.g. ~MIRYOKU_CLIPBOARD=WIN~. | U_UND | UNDO | -***** Mac +****** Mac ~MIRYOKU_CLIPBOARD=MAC~ @@ -491,7 +457,7 @@ building, e.g. ~MIRYOKU_CLIPBOARD=WIN~. | U_UND | LCMD(KC_Z) | -***** Windows +****** Windows ~MIRYOKU_CLIPBOARD=WIN~ @@ -503,32 +469,32 @@ building, e.g. ~MIRYOKU_CLIPBOARD=WIN~. | U_UND | C(KC_Z) | -**** Layers +***** Layers -***** Flip +****** Flip Flip base layer thumb keys and sub layers between right and left hands. To select, append ~MIRYOKU_LAYERS=FLIP~ to the ~make~ command line when building. -****** Thumbs +******* Thumbs #+NAME: thumbs-flip | U_NP | U_NP | DEL | BSPC | ENT | TAB | SPC | ESC | U_NP | U_NP | -****** Hold +******* Hold #+NAME: hold-flip -| RESET | | | | | | | | | RESET | -| LGUI | LALT | LCTL | LSFT | | | LSFT | LCTL | LALT | LGUI | -| | ALGR | | | | | | | ALGR | | -| U_NP | U_NP | FUN | NUM | SYM | MOUSE | NAV | MEDIA | U_NP | U_NP | +| RESET | | | | | | | | | RESET | +| LGUI | LALT | LCTL | LSFT | | | LSFT | LCTL | LALT | LGUI | +| BUTTON | ALGR | | | | | | | ALGR | BUTTON | +| U_NP | U_NP | FUN | NUM | SYM | MOUSE | NAV | MEDIA | U_NP | U_NP | -****** Nav +******* Nav #+NAME: nav-l | HOME | PGDN | PGUP | END | INS | @@ -537,7 +503,7 @@ To select, append ~MIRYOKU_LAYERS=FLIP~ to the ~make~ command line when building | U_NP | U_NP | DEL | BSPC | ENT | -****** Mouse +******* Mouse #+NAME: mouse-l | WH_L | WH_D | WH_U | WH_R | | @@ -546,16 +512,7 @@ To select, append ~MIRYOKU_LAYERS=FLIP~ to the ~make~ command line when building | U_NP | U_NP | BTN2 | BTN3 | BTN1 | -****** Mouse Buttons Overlay - -#+NAME: mbo-flip -| | | | | | | | | | | -| LGUI | LALT | LCTL | LSFT | | | LSFT | LCTL | LALT | LGUI | -| U_RDO | U_PST | U_CPY | U_CUT | U_UND | U_RDO | U_PST | U_CPY | U_CUT | U_UND | -| U_NP | U_NP | BTN2 | BTN3 | BTN1 | BTN1 | BTN3 | BTN2 | U_NP | U_NP | - - -****** Media +******* Media #+NAME: media-l | RGB_MOD | RGB_HUI | RGB_SAI | RGB_VAI | RGB_TOG | @@ -564,7 +521,7 @@ To select, append ~MIRYOKU_LAYERS=FLIP~ to the ~make~ command line when building | U_NP | U_NP | MUTE | MPLY | MSTP | -****** Num +******* Num #+NAME: num-r | [ | 7 | 8 | 9 | ] | @@ -573,7 +530,7 @@ To select, append ~MIRYOKU_LAYERS=FLIP~ to the ~make~ command line when building | MINS | 0 | DOT | U_NP | U_NP | -****** Sym +******* Sym #+NAME: sym-r | { | & | * | ( | } | @@ -582,7 +539,7 @@ To select, append ~MIRYOKU_LAYERS=FLIP~ to the ~make~ command line when building | _ | ( | ) | U_NP | U_NP | -****** Fun +******* Fun #+NAME: fun-r | PSCR | F7 | F8 | F9 | F12 | @@ -591,7 +548,7 @@ To select, append ~MIRYOKU_LAYERS=FLIP~ to the ~make~ command line when building | TAB | SPC | APP | U_NP | U_NP | -*** COMMENT Templates +**** COMMENT Templates #+NAME: tem | | | | | | | | | | | @@ -621,13 +578,16 @@ Duplicate base layer tap keys on thumbs rather than trans to enable auto-repeat. | U_NP | U_NP | ESC | SPC | TAB | -* Code Generation +** Code Generation + +The layout is maintained in emacs org-mode tables and converted to QMK keymap +data structures using embedded python scripts. -** Table Conversion Scripts +*** Table Conversion Scripts -*** table-layout-taphold +**** table-layout-taphold Produce base layer from separate tap and hold tables. @@ -669,7 +629,7 @@ return results : U_NP, U_NP, LT(MEDIA, KC_ESC), LT(NAV, KC_SPC), LT(MOUSE, KC_TAB), LT(SYM, KC_ENT), LT(NUM, KC_BSPC), LT(FUN, KC_DEL), U_NP, U_NP -*** table-layout-half +**** table-layout-half Produce sub layers given layer name and corresponding table for single hand and incorporating mods and reset from base layer. Layer names must end with 'R' or @@ -726,12 +686,12 @@ return results : U_NP, U_NP, U_NA, U_NA, U_NA, KC_ENT, KC_BSPC, KC_DEL, U_NP, U_NP -*** table-layout-full +**** table-layout-full Produce full layer from single table. Fill for unused keys is configurable. #+NAME: table-layout-full -#+BEGIN_SRC python :var table=mbo :var fill="TRNS" :var symbol_names_table=symbol-names :var nonkc_table=nonkc :tangle no :results verbatim +#+BEGIN_SRC python :var table=button :var fill="TRNS" :var symbol_names_table=symbol-names :var nonkc_table=nonkc :tangle no :results verbatim width = 9 symbol_names_dict = {} nonkc_tuple = tuple(nonkc_table[0]) @@ -757,33 +717,33 @@ return results #+END_SRC #+RESULTS: table-layout-full -: U_RDO, U_PST, U_CPY, U_CUT, U_UND, U_RDO, U_PST, U_CPY, U_CUT, U_UND, +: U_UND, U_CUT, U_CPY, U_PST, U_RDO, U_RDO, U_PST, U_CPY, U_CUT, U_UND, : KC_LGUI, KC_LALT, KC_LCTL, KC_LSFT, KC_TRNS, KC_TRNS, KC_LSFT, KC_LCTL, KC_LALT, KC_LGUI, -: KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, +: U_UND, U_CUT, U_CPY, U_PST, U_RDO, U_RDO, U_PST, U_CPY, U_CUT, U_UND, : U_NP, U_NP, KC_BTN2, KC_BTN3, KC_BTN1, KC_BTN1, KC_BTN3, KC_BTN2, U_NP, U_NP -*** table-enums +**** table-enums Produce layer enums from layer names in hold table. #+NAME: table-enums #+BEGIN_SRC python :var hold_table=hold :var mods_table=mods :tangle no mods_dict = dict.fromkeys(mods_table[0]) -results = 'enum layers { BASE, MBO, ' +layers = [ 'BASE', 'BUTTON' ] for hold_row in hold_table: for hold in hold_row: - if hold not in mods_dict and hold != '' and hold != 'U_NP' and hold != 'RESET': - results += hold + ', ' -results = results.rstrip(', ') + ' };' + if hold not in mods_dict and hold != '' and hold != 'U_NP' and hold != 'RESET' and hold not in layers: + layers.append(hold) +results = 'enum layers { ' + ', '.join(layers) + ' };' return results #+END_SRC #+RESULTS: table-enums -: enum layers { BASE, MBO, MEDIA, NAV, MOUSE, SYM, NUM, FUN }; +: enum layers { BASE, BUTTON, MEDIA, NAV, MOUSE, SYM, NUM, FUN }; -*** table-keycode-mappings +**** table-keycode-mappings Produce keycode mappings according to the provided table. @@ -816,7 +776,7 @@ return results : #define U_UND KC_UNDO -*** COMMENT python-version +**** COMMENT python-version C-c C-c in code block to update @@ -831,10 +791,10 @@ return sys.version : [GCC 5.4.0 20160609] -** Data +*** Data -*** symbol-names +**** symbol-names Symbol, name, and shifted symbol mappings for use in tables. @@ -862,7 +822,7 @@ Symbol, name, and shifted symbol mappings for use in tables. | 0 | 0 | ) | RPRN | -*** mods +**** mods Modifiers usable in hold table. Need to have the same name for ~KC_~ and ~_T~ versions. @@ -871,7 +831,7 @@ versions. | LSFT | LCTL | LALT | LGUI | ALGR | -*** nonkc +**** nonkc Keycodes that match any of these prefixes will not have ~KC_~ automatically prepended. @@ -880,7 +840,7 @@ prepended. | U_ | RGB_ | RESET | S( | C( | SCMD( | LCMD( | -*** header +**** header Header for tangled files. @@ -888,11 +848,11 @@ Header for tangled files. #+BEGIN_SRC C :main no :tangle no Copyright 2019 Manna Harbour https://github.com/manna-harbour/miryoku -generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +generated -*- buffer-read-only: t -*- #+END_SRC -*** license-qmk +**** license-qmk License for tangled QMK C source files. @@ -902,20 +862,21 @@ License for tangled QMK C source files. #+END_SRC -* Subset Mapping +** Subset Mapping The keymap, build options, and configuration are shared between keyboards. The -layout is mapped onto keyboards with different physical layouts as a subset. +layout is mapped onto keyboards with different physical layouts as a subset +without code duplication using the QMK userspace feature and C macros. -** Userspace +*** Userspace The keymap is defined for ~LAYOUT_miryoku~ which is 10x4, with the outer 2 positions on the bottom row unused and the rest of the bottom row being the thumb keys. -*** [[./rules.mk][users/manna-harbour_miryoku/rules.mk]] +**** [[./rules.mk][users/manna-harbour_miryoku/rules.mk]] Build options. Automatically included. @@ -957,7 +918,7 @@ endif #+END_SRC -*** [[./config.h][users/manna-harbour_miryoku/config.h]] +**** [[./config.h][users/manna-harbour_miryoku/config.h]] Config options. Automatically included. @@ -1000,7 +961,7 @@ Config options. Automatically included. #+END_SRC -*** [[./manna-harbour_miryoku.h][users/manna-harbour_miryoku/manna-harbour_miryoku.h]] +**** [[./manna-harbour_miryoku.h][users/manna-harbour_miryoku/manna-harbour_miryoku.h]] Keymap-related definitions. Included from ~manna-harbour_miryoku.c~. Can be included from keymap or layout ~keymap.c~ if needed. @@ -1034,7 +995,7 @@ included from keymap or layout ~keymap.c~ if needed. #+END_SRC -*** [[./manna-harbour_miryoku.c][users/manna-harbour_miryoku/manna-harbour_miryoku.c]] +**** [[./manna-harbour_miryoku.c][users/manna-harbour_miryoku/manna-harbour_miryoku.c]] Contains the keymap. Added from ~rules.mk~. @@ -1048,7 +1009,9 @@ Contains the keymap. Added from ~rules.mk~. const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { #if defined MIRYOKU_LAYERS_FLIP [BASE] = LAYOUT_miryoku( - #if defined MIRYOKU_ALPHAS_COLEMAK + #if defined MIRYOKU_ALPHAS_AZERTY +<> + #elif defined MIRYOKU_ALPHAS_COLEMAK <> #elif defined MIRYOKU_ALPHAS_COLEMAKDHK <> @@ -1060,6 +1023,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { <> #elif defined MIRYOKU_ALPHAS_QWERTY <> + #elif defined MIRYOKU_ALPHAS_QWERTZ +<> #else <> #endif @@ -1085,9 +1050,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { <> ), #endif - [MBO] = LAYOUT_miryoku( -<> - ), [NUM] = LAYOUT_miryoku( <> ), @@ -1096,11 +1058,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), [FUN] = LAYOUT_miryoku( <> - ) -, + ), #else [BASE] = LAYOUT_miryoku( - #if defined MIRYOKU_ALPHAS_COLEMAK + #if defined MIRYOKU_ALPHAS_AZERTY +<> + #elif defined MIRYOKU_ALPHAS_COLEMAK <> #elif defined MIRYOKU_ALPHAS_COLEMAKDHK <> @@ -1112,6 +1075,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { <> #elif defined MIRYOKU_ALPHAS_QWERTY <> + #elif defined MIRYOKU_ALPHAS_QWERTZ +<> #else <> #endif @@ -1137,9 +1102,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { <> ), #endif - [MBO] = LAYOUT_miryoku( -<> - ), [NUM] = LAYOUT_miryoku( <> ), @@ -1148,13 +1110,16 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), [FUN] = LAYOUT_miryoku( <> - ) + ), #endif + [BUTTON] = LAYOUT_miryoku( +<> + ) }; #+END_SRC -** Layouts +*** Layouts To use the keymap on a keyboard supporting the layouts feature, ~LAYOUT_miryoku~ is defined as a macro mapping onto the layout's own ~LAYOUT~ macro, leaving the @@ -1170,7 +1135,7 @@ make planck/rev6:manna-harbour_miryoku:flash FORCE_LAYOUT=ortho_4x12 # ortho_4x1 #+END_SRC -*** 60_ansi +**** 60_ansi An angled ortho split layout is mapped onto the row-staggered keyboard. The rows are moved up to better position the thumb keys, the hands are separated as @@ -1185,6 +1150,11 @@ command line when building. [[https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/mapping/miryoku-kle-mapping-60_ansi-noreverseangle.png]] +Another alternative subset mapping is provided mapping only the 3x10 alphas, +plus spacebar for space / Nav, with the remainder being the default 60_ansi +keymap with semicolon in place of quote. To select this mapping, append +~MIRYOKU_MAPPING=LITE~ to the ~make~ command line when building. + Keyboards supporting this layout: alps64, amj60, bakeneko60, bm60poker, bm60rgb, do60, dp60, dz60, facew, gskt00, infinity60, jm60, kc60, kc60se, ok60, org60, paladin64, panc60, reviung61, smk60, v60_type_r, yd60mq, 1upkeyboards/1up60hse, 1upkeyboards/1up60rgb, 40percentclub/luddite, acheron/keebspcb, acheron/lasgweloth, ai03/polaris, akegata_denki/device_one, atxkb/1894, bioi/g60ble, bt66tech/bt66tech60, cannonkeys/an_c, cannonkeys/instant60, cannonkeys/practice60, clawsome/coupe, dm9records/tartan, duck/eagle_viper, evyd13/plain60, exclusive/e6_rgb, gh60/revc, gh60/satan, gh60/v1p3, handwired/xealousbrown, hineybush/h60, hs60/v1, keebio/wtf60, noxary/260, playkbtw/pk60, ryloo_studio/m0110, thevankeyboards/bananasplit, wilba_tech/zeal60, xd60/rev2, xd60/rev3, cannonkeys/db60/hotswap, cannonkeys/db60/j02, cannonkeys/db60/rev2, exclusive/e6v2/le, exclusive/e6v2/oe, foxlab/leaf60/universal, handwired/co60/rev1, handwired/co60/rev7, handwired/swiftrax/nodu, hs60/v2/ansi, inett_studio/sqx/universal, melgeek/mj61/rev1, melgeek/mj61/rev2, melgeek/mj63/rev1, melgeek/mj63/rev2, sentraq/s60_x/default, sentraq/s60_x/rgb. Example build command lines: @@ -1192,10 +1162,11 @@ Example build command lines: #+BEGIN_SRC sh :tangle no make dz60:manna-harbour_miryoku:flash # dz60 make dz60:manna-harbour_miryoku:flash MIRYOKU_MAPPING=NOREVERSEANGLE # dz60, without reverse column angle +make dz60:manna-harbour_miryoku:flash MIRYOKU_MAPPING=LITE # dz60, with lite mapping #+END_SRC -**** [[../../layouts/community/60_ansi/manna-harbour_miryoku/config.h][layouts/community/60_ansi/manna-harbour_miryoku/config.h]] +***** [[../../layouts/community/60_ansi/manna-harbour_miryoku/config.h][layouts/community/60_ansi/manna-harbour_miryoku/config.h]] Contains subset mapping. @@ -1209,7 +1180,7 @@ Contains subset mapping. #define XXX KC_NO #if defined MIRYOKU_MAPPING_NOREVERSEANGLE -#define LAYOUT_miryoku(\ + #define LAYOUT_miryoku(\ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09,\ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,\ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\ @@ -1222,8 +1193,38 @@ K00, K01, K02, K03, K04, XXX, XXX, XXX, K05, K06, K07, K08, K09, XX XXX, K32, K33, K34, XXX, XXX, XXX, XXX, K35, K36, K37, XXX,\ XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX\ ) +#elif defined MIRYOKU_MAPPING_LITE + #if defined MIRYOKU_LAYERS_FLIP + #define LAYOUT_miryoku( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \ + N30, N31, K32, K33, K34, K35, K36, K37, N38, N39 \ +) \ +LAYOUT_60_ansi( \ +KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ +KC_TAB, K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, KC_LBRC, KC_RBRC, KC_BSLS, \ +KC_CAPS, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, KC_SCLN, KC_ENT, \ +KC_LSFT, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, KC_RSFT, \ +KC_LCTL, KC_LGUI, KC_LALT, K36, KC_RALT, KC_RGUI, KC_APP, KC_RCTL \ +) + #else + #define LAYOUT_miryoku( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \ + N30, N31, K32, K33, K34, K35, K36, K37, N38, N39 \ +) \ +LAYOUT_60_ansi( \ +KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \ +KC_TAB, K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, KC_LBRC, KC_RBRC, KC_BSLS, \ +KC_CAPS, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, KC_SCLN, KC_ENT, \ +KC_LSFT, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, KC_RSFT, \ +KC_LCTL, KC_LGUI, KC_LALT, K33, KC_RALT, KC_RGUI, KC_APP, KC_RCTL \ +) + #endif #else -#define LAYOUT_miryoku(\ + #define LAYOUT_miryoku(\ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09,\ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,\ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\ @@ -1240,7 +1241,7 @@ XXX, XXX, K00, K01, K02, K03, K04, XXX, K05, K06, K07, K08, K09, XX #+END_SRC -**** [[../../layouts/community/60_ansi/manna-harbour_miryoku/keymap.c][layouts/community/60_ansi/manna-harbour_miryoku/keymap.c]] +***** [[../../layouts/community/60_ansi/manna-harbour_miryoku/keymap.c][layouts/community/60_ansi/manna-harbour_miryoku/keymap.c]] Required by the build system. @@ -1251,7 +1252,7 @@ Required by the build system. #+END_SRC -*** ergodox +**** ergodox For the ergodox layout, the main 5x3 alphas are used as usual. The primary and secondary thumb keys are the inner and outer 2u thumb keys and the tertiary @@ -1270,7 +1271,7 @@ make ergodox_ez:manna-harbour_miryoku:flash # ergodox_ez #+END_SRC -**** [[../../layouts/community/ergodox/manna-harbour_miryoku/config.h][layouts/community/ergodox/manna-harbour_miryoku/config.h]] +***** [[../../layouts/community/ergodox/manna-harbour_miryoku/config.h][layouts/community/ergodox/manna-harbour_miryoku/config.h]] Contains subset mapping. @@ -1302,7 +1303,7 @@ XXX, XXX, XXX, XXX, K32, K37, XXX, XXX, XXX, XXX,\ #+END_SRC -**** [[../../layouts/community/ergodox/manna-harbour_miryoku/keymap.c][layouts/community/ergodox/manna-harbour_miryoku/keymap.c]] +***** [[../../layouts/community/ergodox/manna-harbour_miryoku/keymap.c][layouts/community/ergodox/manna-harbour_miryoku/keymap.c]] Required by the build system. @@ -1313,7 +1314,9 @@ Required by the build system. #+END_SRC -*** ortho_4x10 +**** ortho_4x10 + +An alternative with 180 degree rotation is also provided to enable the USB cable to be relocated for use with laptops. To select this mapping, append ~MIRYOKU_MAPPING=ROTATE~ to the ~make~ command line when building. Keyboards supporting this layout: newgame40, nimrod, marksard/rhymestone, pabile/p40. @@ -1321,10 +1324,11 @@ Example build command lines: #+BEGIN_SRC sh :tangle no make marksard/rhymestone:manna-harbour_miryoku:flash # marksard/rhymestone +make pabile/p40:manna-harbour_miryoku:flash MIRYOKU_MAPPING=ROTATE # pabile/p40, rotate #+END_SRC -**** [[../../layouts/community/ortho_4x10/manna-harbour_miryoku/config.h][layouts/community/ortho_4x10/manna-harbour_miryoku/config.h]] +***** [[../../layouts/community/ortho_4x10/manna-harbour_miryoku/config.h][layouts/community/ortho_4x10/manna-harbour_miryoku/config.h]] Contains subset mapping. @@ -1335,22 +1339,39 @@ Contains subset mapping. #pragma once +#define XXX KC_NO + +#if defined MIRYOKU_MAPPING_ROTATE +#define LAYOUT_miryoku( \ +K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \ +K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \ +K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \ +N30, N31, K32, K33, K34, K35, K36, K37, N38, N39 \ +) \ +LAYOUT_ortho_4x10( \ +XXX, XXX, K37, K36, K35, K34, K33, K32, XXX, XXX, \ +K29, K28, K27, K26, K25, K24, K23, K22, K21, K20, \ +K19, K18, K17, K16, K15, K14, K13, K12, K11, K10, \ +K09, K08, K07, K06, K05, K04, K03, K02, K01, K00 \ +) +#else #define LAYOUT_miryoku(\ -K00, K01, K02, K03, K04, K05, K06, K07, K08, K09,\ -K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,\ -K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\ -N30, N31, K32, K33, K34, K35, K36, K37, N38, N39\ -)\ -LAYOUT_ortho_4x10(\ -K00, K01, K02, K03, K04, K05, K06, K07, K08, K09,\ -K10, K11, K12, K13, K14, K15, K16, K17, K18, K19,\ -K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\ -KC_NO, KC_NO, K32, K33, K34, K35, K36, K37, KC_NO, KC_NO\ +K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \ +K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \ +K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \ +N30, N31, K32, K33, K34, K35, K36, K37, N38, N39 \ +) \ +LAYOUT_ortho_4x10( \ +K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \ +K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \ +K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \ +XXX, XXX, K32, K33, K34, K35, K36, K37, XXX, XXX \ ) +#endif #+END_SRC -**** [[../../layouts/community/ortho_4x10/manna-harbour_miryoku/keymap.c][layouts/community/ortho_4x10/manna-harbour_miryoku/keymap.c]] +***** [[../../layouts/community/ortho_4x10/manna-harbour_miryoku/keymap.c][layouts/community/ortho_4x10/manna-harbour_miryoku/keymap.c]] Required by the build system. @@ -1361,7 +1382,7 @@ Required by the build system. #+END_SRC -*** ortho_4x12 +**** ortho_4x12 For the ortho_4x12 layout, the middle two columns, and the 2 keys on each end of the bottom row are unused. This allows the hands to be positioned without ulnar @@ -1398,7 +1419,7 @@ make keebio/levinson:manna-harbour_miryoku:flash MIRYOKU_MAPPING=EXTENDED_THUMBS #+END_SRC -**** [[../../layouts/community/ortho_4x12/manna-harbour_miryoku/config.h][layouts/community/ortho_4x12/manna-harbour_miryoku/config.h]] +***** [[../../layouts/community/ortho_4x12/manna-harbour_miryoku/config.h][layouts/community/ortho_4x12/manna-harbour_miryoku/config.h]] Contains subset mapping. @@ -1452,7 +1473,7 @@ KC_NO, KC_NO, K32, K33, K34, KC_NO, KC_NO, K35, K36, K37, KC_NO, KC_ #+END_SRC -**** [[../../layouts/community/ortho_4x12/manna-harbour_miryoku/keymap.c][layouts/community/ortho_4x12/manna-harbour_miryoku/keymap.c]] +***** [[../../layouts/community/ortho_4x12/manna-harbour_miryoku/keymap.c][layouts/community/ortho_4x12/manna-harbour_miryoku/keymap.c]] Required by the build system. @@ -1463,7 +1484,7 @@ Required by the build system. #+END_SRC -*** ortho_5x12 +**** ortho_5x12 As per ortho_4x12 but the top row is unused. @@ -1480,7 +1501,7 @@ make keebio/nyquist/rev3:manna-harbour_miryoku:flash MIRYOKU_MAPPING=EXTENDED_TH #+END_SRC -**** [[../../layouts/community/ortho_5x12/manna-harbour_miryoku/config.h][layouts/community/ortho_5x12/manna-harbour_miryoku/config.h]] +***** [[../../layouts/community/ortho_5x12/manna-harbour_miryoku/config.h][layouts/community/ortho_5x12/manna-harbour_miryoku/config.h]] Contains subset mapping. @@ -1537,7 +1558,7 @@ KC_NO, KC_NO, K32, K33, K34, KC_NO, KC_NO, K35, K36, K37, KC_NO, KC_ #+END_SRC -**** [[../../layouts/community/ortho_5x12/manna-harbour_miryoku/keymap.c][layouts/community/ortho_5x12/manna-harbour_miryoku/keymap.c]] +***** [[../../layouts/community/ortho_5x12/manna-harbour_miryoku/keymap.c][layouts/community/ortho_5x12/manna-harbour_miryoku/keymap.c]] Required by the build system. @@ -1548,7 +1569,7 @@ Required by the build system. #+END_SRC -*** ortho_5x15 +**** ortho_5x15 For the ortho_5x15 layout, the top row, middle 5 columns, and the 2 keys on each end of the bottom row are unused. This allows the hands to be positioned @@ -1574,7 +1595,7 @@ make idobo:manna-harbour_miryoku:flash # idobo #+END_SRC -**** [[../../layouts/community/ortho_5x15/manna-harbour_miryoku/config.h][layouts/community/ortho_5x15/manna-harbour_miryoku/config.h]] +***** [[../../layouts/community/ortho_5x15/manna-harbour_miryoku/config.h][layouts/community/ortho_5x15/manna-harbour_miryoku/config.h]] Contains subset mapping. @@ -1621,7 +1642,7 @@ XXX, XXX, K32, K33, K34, XXX, XXX, XXX, XXX, XXX, K35, K36, K37, XXX, XXX\ #+RESULTS: -**** [[../../layouts/community/ortho_5x15/manna-harbour_miryoku/keymap.c][layouts/community/ortho_5x15/manna-harbour_miryoku/keymap.c]] +***** [[../../layouts/community/ortho_5x15/manna-harbour_miryoku/keymap.c][layouts/community/ortho_5x15/manna-harbour_miryoku/keymap.c]] Required by the build system. @@ -1632,7 +1653,7 @@ Required by the build system. #+END_SRC -*** planck_mit +**** planck_mit The middle two columns including the middle 2u key, and the 2 keys on each end of the bottom row are unused. @@ -1647,7 +1668,7 @@ make planck/rev6:manna-harbour_miryoku:flash FORCE_LAYOUT=planck_mit # planck re #+END_SRC -**** [[../../layouts/community/planck_mit/manna-harbour_miryoku/config.h][layouts/community/planck_mit/manna-harbour_miryoku/config.h]] +***** [[../../layouts/community/planck_mit/manna-harbour_miryoku/config.h][layouts/community/planck_mit/manna-harbour_miryoku/config.h]] Contains subset mapping. @@ -1673,7 +1694,7 @@ KC_NO, KC_NO, K32, K33, K34, KC_NO, K35, K36, K37, KC_NO, KC_ #+END_SRC -**** [[../../layouts/community/planck_mit/manna-harbour_miryoku/keymap.c][layouts/community/planck_mit/manna-harbour_miryoku/keymap.c]] +***** [[../../layouts/community/planck_mit/manna-harbour_miryoku/keymap.c][layouts/community/planck_mit/manna-harbour_miryoku/keymap.c]] Required by the build system. @@ -1684,7 +1705,7 @@ Required by the build system. #+END_SRC -*** split_3x5_3 +**** split_3x5_3 Keyboards supporting this layout: arch_36, boardsource/microdox, centromere, crkbd, eek, miniaxe, minidox/rev1, pteron36, squiggle/rev1, suihankey/split/rev1. @@ -1696,7 +1717,7 @@ make minidox:manna-harbour_miryoku:flash # minidox #+END_SRC -**** [[../../layouts/community/split_3x5_3/manna-harbour_miryoku/config.h][layouts/community/split_3x5_3/manna-harbour_miryoku/config.h]] +***** [[../../layouts/community/split_3x5_3/manna-harbour_miryoku/config.h][layouts/community/split_3x5_3/manna-harbour_miryoku/config.h]] Contains subset mapping. @@ -1722,7 +1743,7 @@ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\ #+END_SRC -**** [[../../layouts/community/split_3x5_3/manna-harbour_miryoku/keymap.c][layouts/community/split_3x5_3/manna-harbour_miryoku/keymap.c]] +***** [[../../layouts/community/split_3x5_3/manna-harbour_miryoku/keymap.c][layouts/community/split_3x5_3/manna-harbour_miryoku/keymap.c]] Required by the build system. @@ -1733,7 +1754,7 @@ Required by the build system. #+END_SRC -*** split_3x6_3 +**** split_3x6_3 The outer columns are unused. @@ -1747,7 +1768,7 @@ make crkbd:manna-harbour_miryoku:flash # crkbd #+END_SRC -**** [[../../layouts/community/split_3x6_3/manna-harbour_miryoku/config.h][layouts/community/split_3x6_3/manna-harbour_miryoku/config.h]] +***** [[../../layouts/community/split_3x6_3/manna-harbour_miryoku/config.h][layouts/community/split_3x6_3/manna-harbour_miryoku/config.h]] Contains subset mapping. @@ -1773,7 +1794,7 @@ KC_NO, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29 #+END_SRC -**** [[../../layouts/community/split_3x6_3/manna-harbour_miryoku/keymap.c][layouts/community/split_3x6_3/manna-harbour_miryoku/keymap.c]] +***** [[../../layouts/community/split_3x6_3/manna-harbour_miryoku/keymap.c][layouts/community/split_3x6_3/manna-harbour_miryoku/keymap.c]] Required by the build system. @@ -1784,14 +1805,14 @@ Required by the build system. #+END_SRC -** Keyboards +*** Keyboards To use the keymap on a keyboard which does not support the layouts feature, ~LAYOUT_miryoku~ is defined as a macro mapping onto the keyboard's own ~LAYOUT~ macro, leaving the unused keys as ~KC_NO~. -*** atreus +**** atreus Only the main 5x3 alphas and the inner 3 thumb keys are used. @@ -1802,7 +1823,7 @@ make atreus:manna-harbour_miryoku:flash #+END_SRC -**** [[../../keyboards/atreus/keymaps/manna-harbour_miryoku/config.h][keyboards/atreus/keymaps/manna-harbour_miryoku/config.h]] +***** [[../../keyboards/atreus/keymaps/manna-harbour_miryoku/config.h][keyboards/atreus/keymaps/manna-harbour_miryoku/config.h]] Contains subset mapping. @@ -1830,7 +1851,7 @@ XXX, XXX, XXX, K32, K33, K34, K35, K36, K37, XXX, XXX, XXX\ #+END_SRC -**** [[../../keyboards/atreus/keymaps/manna-harbour_miryoku/keymap.c][keyboards/atreus/keymaps/manna-harbour_miryoku/keymap.c]] +***** [[../../keyboards/atreus/keymaps/manna-harbour_miryoku/keymap.c][keyboards/atreus/keymaps/manna-harbour_miryoku/keymap.c]] Required by the build system. @@ -1841,7 +1862,57 @@ Required by the build system. #+END_SRC -*** ergotravel +**** bastardkb/scylla + +To build for this keyboard, + +#+BEGIN_SRC sh :tangle no +make bastardkb/scylla:manna-harbour_miryoku:flash +#+END_SRC + + +***** [[../../keyboards/bastardkb/scylla/keymaps/manna-harbour_miryoku/config.h][keyboards/bastardkb/scylla/keymaps/manna-harbour_miryoku/config.h]] + +Contains subset mapping. + +#+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../keyboards/bastardkb/scylla/keymaps/manna-harbour_miryoku/config.h +// <
> + +<> + +#pragma once + +#define XXX KC_NO + +#define LAYOUT_miryoku( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \ + N30, N31, K32, K33, K34, K35, K36, K37, N38, N39 \ +) \ +LAYOUT_split_4x6_5( \ +XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, \ +XXX, K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, XXX, \ +XXX, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, XXX, \ +XXX, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, XXX, \ + K32, K33, K34, K35, K36, K37, \ + XXX, XXX, XXX, XXX \ +) +#+END_SRC + + +***** [[../../keyboards/bastardkb/scylla/keymaps/manna-harbour_miryoku/keymap.c][keyboards/bastardkb/scylla/keymaps/manna-harbour_miryoku/keymap.c]] + +Required by the build system. + +#+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../keyboards/bastardkb/scylla/keymaps/manna-harbour_miryoku/keymap.c +// <
> + +<> +#+END_SRC + + +**** ergotravel To build for this keyboard, @@ -1850,7 +1921,7 @@ make ergotravel:manna-harbour_miryoku:flash #+END_SRC -**** [[../../keyboards/ergotravel/keymaps/manna-harbour_miryoku/config.h][keyboards/ergotravel/keymaps/manna-harbour_miryoku/config.h]] +***** [[../../keyboards/ergotravel/keymaps/manna-harbour_miryoku/config.h][keyboards/ergotravel/keymaps/manna-harbour_miryoku/config.h]] Contains subset mapping. @@ -1878,7 +1949,7 @@ XXX, XXX, XXX, K32, K33, K34, K35, K36, K37, XXX, XXX, XXX \ #+END_SRC -**** [[../../keyboards/ergotravel/keymaps/manna-harbour_miryoku/keymap.c][keyboards/ergotravel/keymaps/manna-harbour_miryoku/keymap.c]] +***** [[../../keyboards/ergotravel/keymaps/manna-harbour_miryoku/keymap.c][keyboards/ergotravel/keymaps/manna-harbour_miryoku/keymap.c]] Required by the build system. @@ -1889,7 +1960,7 @@ Required by the build system. #+END_SRC -*** for_science +**** for_science The top row is unused. @@ -1900,7 +1971,7 @@ make for_science:manna-harbour_miryoku:flash #+END_SRC -**** [[../../keyboards/for_science/keymaps/manna-harbour_miryoku/config.h][keyboards/for_science/keymaps/manna-harbour_miryoku/config.h]] +***** [[../../keyboards/for_science/keymaps/manna-harbour_miryoku/config.h][keyboards/for_science/keymaps/manna-harbour_miryoku/config.h]] Contains subset mapping. @@ -1929,7 +2000,7 @@ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\ #+END_SRC -**** [[../../keyboards/for_science/keymaps/manna-harbour_miryoku/keymap.c][keyboards/for_science/keymaps/manna-harbour_miryoku/keymap.c]] +***** [[../../keyboards/for_science/keymaps/manna-harbour_miryoku/keymap.c][keyboards/for_science/keymaps/manna-harbour_miryoku/keymap.c]] Required by the build system. @@ -1940,7 +2011,7 @@ Required by the build system. #+END_SRC -*** gergo +**** gergo Only the main 5x3 alphas and the outer 3 thumb keys are used. @@ -1951,7 +2022,7 @@ make gergo:manna-harbour_miryoku:flash #+END_SRC -**** [[../../keyboards/gergo/keymaps/manna-harbour_miryoku/config.h][keyboards/gergo/keymaps/manna-harbour_miryoku/config.h]] +***** [[../../keyboards/gergo/keymaps/manna-harbour_miryoku/config.h][keyboards/gergo/keymaps/manna-harbour_miryoku/config.h]] Contains subset mapping. @@ -1979,7 +2050,7 @@ XXX, K20, K21, K22, K23, K24, XXX, XXX, XXX, XXX, K25, K26, K27, K28, K29, #+END_SRC -**** [[../../keyboards/gergo/keymaps/manna-harbour_miryoku/keymap.c][keyboards/gergo/keymaps/manna-harbour_miryoku/keymap.c]] +***** [[../../keyboards/gergo/keymaps/manna-harbour_miryoku/keymap.c][keyboards/gergo/keymaps/manna-harbour_miryoku/keymap.c]] Required by the build system. @@ -1990,7 +2061,7 @@ Required by the build system. #+END_SRC -*** handwired/dactyl_manuform/4x5 +**** handwired/dactyl_manuform/4x5 Only the main 5x3 alphas and the main 3 thumb keys are used. @@ -2001,7 +2072,7 @@ make handwired/dactyl_manuform/4x5:manna-harbour_miryoku:flash #+END_SRC -**** [[../../keyboards/handwired/dactyl_manuform/4x5/keymaps/manna-harbour_miryoku/config.h][keyboards/handwired/dactyl_manuform/4x5/keymaps/manna-harbour_miryoku/config.h]] +***** [[../../keyboards/handwired/dactyl_manuform/4x5/keymaps/manna-harbour_miryoku/config.h][keyboards/handwired/dactyl_manuform/4x5/keymaps/manna-harbour_miryoku/config.h]] Contains subset mapping. @@ -2032,7 +2103,7 @@ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29,\ #+END_SRC -**** [[../../keyboards/handwired/dactyl_manuform/4x5/keymaps/manna-harbour_miryoku/keymap.c][keyboards/handwired/dactyl_manuform/4x5/keymaps/manna-harbour_miryoku/keymap.c]] +***** [[../../keyboards/handwired/dactyl_manuform/4x5/keymaps/manna-harbour_miryoku/keymap.c][keyboards/handwired/dactyl_manuform/4x5/keymaps/manna-harbour_miryoku/keymap.c]] Required by the build system. @@ -2043,7 +2114,7 @@ Required by the build system. #+END_SRC -*** handwired/dactyl_manuform/5x6 +**** handwired/dactyl_manuform/5x6 Only the main 5x3 alphas and the main 3 thumb keys are used. @@ -2054,7 +2125,7 @@ make handwired/dactyl_manuform/5x6:manna-harbour_miryoku:flash #+END_SRC -**** [[../../keyboards/handwired/dactyl_manuform/5x6/keymaps/manna-harbour_miryoku/config.h][keyboards/handwired/dactyl_manuform/5x6/keymaps/manna-harbour_miryoku/config.h]] +***** [[../../keyboards/handwired/dactyl_manuform/5x6/keymaps/manna-harbour_miryoku/config.h][keyboards/handwired/dactyl_manuform/5x6/keymaps/manna-harbour_miryoku/config.h]] Contains subset mapping. @@ -2086,7 +2157,7 @@ XXX, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, X #+END_SRC -**** [[../../keyboards/handwired/dactyl_manuform/5x6/keymaps/manna-harbour_miryoku/keymap.c][keyboards/handwired/dactyl_manuform/5x6/keymaps/manna-harbour_miryoku/keymap.c]] +***** [[../../keyboards/handwired/dactyl_manuform/5x6/keymaps/manna-harbour_miryoku/keymap.c][keyboards/handwired/dactyl_manuform/5x6/keymaps/manna-harbour_miryoku/keymap.c]] Required by the build system. @@ -2097,7 +2168,7 @@ Required by the build system. #+END_SRC -*** keebio/iris +**** keebio/iris Only the main 5x3 alphas and the bottom 3 thumb keys are used. @@ -2108,7 +2179,7 @@ make keebio/iris/rev4:manna-harbour_miryoku:flash #+END_SRC -**** [[../../keyboards/keebio/iris/keymaps/manna-harbour_miryoku/config.h][keyboards/keebio/iris/keymaps/manna-harbour_miryoku/config.h]] +***** [[../../keyboards/keebio/iris/keymaps/manna-harbour_miryoku/config.h][keyboards/keebio/iris/keymaps/manna-harbour_miryoku/config.h]] Contains subset mapping. @@ -2137,7 +2208,7 @@ XXX, K20, K21, K22, K23, K24, XXX, XXX, K25, K26, K27, K28, K29, XXX,\ #+END_SRC -**** [[../../keyboards/keebio/iris/keymaps/manna-harbour_miryoku/keymap.c][keyboards/keebio/iris/keymaps/manna-harbour_miryoku/keymap.c]] +***** [[../../keyboards/keebio/iris/keymaps/manna-harbour_miryoku/keymap.c][keyboards/keebio/iris/keymaps/manna-harbour_miryoku/keymap.c]] Required by the build system. @@ -2148,7 +2219,7 @@ Required by the build system. #+END_SRC -*** keyboardio/atreus +**** keyboardio/atreus Only the main 5x3 alphas and the inner 3 thumb keys are used. @@ -2159,7 +2230,7 @@ make keyboardio/atreus:manna-harbour_miryoku:flash #+END_SRC -**** [[../../keyboards/keyboardio/atreus/keymaps/manna-harbour_miryoku/config.h][keyboards/keyboardio/atreus/keymaps/manna-harbour_miryoku/config.h]] +***** [[../../keyboards/keyboardio/atreus/keymaps/manna-harbour_miryoku/config.h][keyboards/keyboardio/atreus/keymaps/manna-harbour_miryoku/config.h]] Contains subset mapping. @@ -2187,7 +2258,7 @@ XXX, XXX, XXX, K32, K33, K34, K35, K36, K37, XXX, XXX, XXX \ #+END_SRC -**** [[../../keyboards/keyboardio/atreus/keymaps/manna-harbour_miryoku/keymap.c][keyboards/keyboardio/atreus/keymaps/manna-harbour_miryoku/keymap.c]] +***** [[../../keyboards/keyboardio/atreus/keymaps/manna-harbour_miryoku/keymap.c][keyboards/keyboardio/atreus/keymaps/manna-harbour_miryoku/keymap.c]] Required by the build system. @@ -2198,82 +2269,7 @@ Required by the build system. #+END_SRC -*** kyria - -Only the main 5x3 alphas and the middle 3 lower thumb keys are used. - -[[https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/mapping/miryoku-kle-mapping-kyria.png]] - -An alternative subset mapping is also provided with the thumb keys shifted one -position in the direction of thumb extension. To select this mapping, append -~MIRYOKU_MAPPING=EXTENDED_THUMBS~ to the ~make~ command line when building. - -[[https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/mapping/miryoku-kle-mapping-kyria-extended_thumbs.png]] - - -To build for this keyboard, - -#+BEGIN_SRC sh :tangle no -make kyria:manna-harbour_miryoku:flash -make kyria:manna-harbour_miryoku:flash MIRYOKU_MAPPING=EXTENDED_THUMBS # extended thumb position -#+END_SRC - - -**** [[../../keyboards/kyria/keymaps/manna-harbour_miryoku/config.h][keyboards/kyria/keymaps/manna-harbour_miryoku/config.h]] - -Contains subset mapping. - -#+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../keyboards/kyria/keymaps/manna-harbour_miryoku/config.h -// <
> - -<> - -#pragma once - -#define XXX KC_NO - -#if defined MIRYOKU_MAPPING_EXTENDED_THUMBS -#define LAYOUT_miryoku( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \ - N30, N31, K32, K33, K34, K35, K36, K37, N38, N39 \ -) \ -LAYOUT( \ -XXX, K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, XXX, \ -XXX, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, XXX, \ -XXX, K20, K21, K22, K23, K24, XXX, XXX, XXX, XXX, K25, K26, K27, K28, K29, XXX, \ - XXX, XXX, K32, K33, K34, K35, K36, K37, XXX, XXX \ -) -#else -#define LAYOUT_miryoku( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \ - N30, N31, K32, K33, K34, K35, K36, K37, N38, N39 \ -) \ -LAYOUT( \ -XXX, K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, XXX, \ -XXX, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, XXX, \ -XXX, K20, K21, K22, K23, K24, XXX, XXX, XXX, XXX, K25, K26, K27, K28, K29, XXX, \ - XXX, K32, K33, K34, XXX, XXX, K35, K36, K37, XXX \ -) -#endif -#+END_SRC - - -**** [[../../keyboards/kyria/keymaps/manna-harbour_miryoku/keymap.c][keyboards/kyria/keymaps/manna-harbour_miryoku/keymap.c]] - -Required by the build system. - -#+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../keyboards/kyria/keymaps/manna-harbour_miryoku/keymap.c -// <
> - -<> -#+END_SRC - - -*** lily58 +**** lily58 Only the main 5x3 alphas and the inner 3 thumb keys are used. @@ -2284,7 +2280,7 @@ make lily58:manna-harbour_miryoku:flash #+END_SRC -**** [[../../keyboards/lily58/keymaps/manna-harbour_miryoku/config.h][keyboards/lily58/keymaps/manna-harbour_miryoku/config.h]] +***** [[../../keyboards/lily58/keymaps/manna-harbour_miryoku/config.h][keyboards/lily58/keymaps/manna-harbour_miryoku/config.h]] Contains subset mapping. @@ -2313,7 +2309,7 @@ XXX, K20, K21, K22, K23, K24, XXX, XXX, K25, K26, K27, K28, K29, XXX,\ #+END_SRC -**** [[../../keyboards/lily58/keymaps/manna-harbour_miryoku/keymap.c][keyboards/lily58/keymaps/manna-harbour_miryoku/keymap.c]] +***** [[../../keyboards/lily58/keymaps/manna-harbour_miryoku/keymap.c][keyboards/lily58/keymaps/manna-harbour_miryoku/keymap.c]] Required by the build system. @@ -2324,7 +2320,7 @@ Required by the build system. #+END_SRC -*** moonlander +**** moonlander The main 5x3 alphas are used as usual. The primary, secondary, and tertiary thumb keys are the closest piano key, middle piano key, and the innermost key of @@ -2337,7 +2333,7 @@ make moonlander:manna-harbour_miryoku:flash #+END_SRC -**** [[../../keyboards/moonlander/keymaps/manna-harbour_miryoku/config.h][keyboards/moonlander/keymaps/manna-harbour_miryoku/config.h]] +***** [[../../keyboards/moonlander/keymaps/manna-harbour_miryoku/config.h][keyboards/moonlander/keymaps/manna-harbour_miryoku/config.h]] Contains subset mapping. @@ -2367,7 +2363,7 @@ XXX, XXX, XXX, XXX, K32, XXX, XXX, K37, XXX, XXX, XXX, XXX,\ #+END_SRC -**** [[../../keyboards/moonlander/keymaps/manna-harbour_miryoku/keymap.c][keyboards/moonlander/keymaps/manna-harbour_miryoku/keymap.c]] +***** [[../../keyboards/moonlander/keymaps/manna-harbour_miryoku/keymap.c][keyboards/moonlander/keymaps/manna-harbour_miryoku/keymap.c]] Required by the build system. @@ -2378,7 +2374,7 @@ Required by the build system. #+END_SRC -*** redox_w +**** redox_w Only the main 5x3 alphas and the main 3 thumb keys are used. @@ -2389,7 +2385,7 @@ make redox_w:manna-harbour_miryoku:flash #+END_SRC -**** [[../../keyboards/redox_w/keymaps/manna-harbour_miryoku/config.h][keyboards/redox_w/keymaps/manna-harbour_miryoku/config.h]] +***** [[../../keyboards/redox_w/keymaps/manna-harbour_miryoku/config.h][keyboards/redox_w/keymaps/manna-harbour_miryoku/config.h]] Contains subset mapping. @@ -2420,7 +2416,7 @@ XXX, XXX, XXX, XXX, K32, K33, K34, K35, K36, K37, XXX, XXX, XXX, #+RESULTS: -**** [[../../keyboards/redox_w/keymaps/manna-harbour_miryoku/keymap.c][keyboards/redox_w/keymaps/manna-harbour_miryoku/keymap.c]] +***** [[../../keyboards/redox_w/keymaps/manna-harbour_miryoku/keymap.c][keyboards/redox_w/keymaps/manna-harbour_miryoku/keymap.c]] Required by the build system. @@ -2431,7 +2427,7 @@ Required by the build system. #+END_SRC -*** sofle +**** sofle To build for this keyboard, @@ -2440,7 +2436,7 @@ make sofle:manna-harbour_miryoku:flash #+END_SRC -**** [[../../keyboards/sofle/keymaps/manna-harbour_miryoku/config.h][keyboards/sofle/keymaps/manna-harbour_miryoku/config.h]] +***** [[../../keyboards/sofle/keymaps/manna-harbour_miryoku/config.h][keyboards/sofle/keymaps/manna-harbour_miryoku/config.h]] Contains subset mapping. @@ -2469,7 +2465,7 @@ XXX, K20, K21, K22, K23, K24, XXX, XXX, K25, K26, K27, K28, K29, XXX,\ #+END_SRC -**** [[../../keyboards/sofle/keymaps/manna-harbour_miryoku/keymap.c][keyboards/sofle/keymaps/manna-harbour_miryoku/keymap.c]] +***** [[../../keyboards/sofle/keymaps/manna-harbour_miryoku/keymap.c][keyboards/sofle/keymaps/manna-harbour_miryoku/keymap.c]] Required by the build system. @@ -2480,7 +2476,82 @@ Required by the build system. #+END_SRC -*** torn +**** splitkb/kyria + +Only the main 5x3 alphas and the middle 3 lower thumb keys are used. + +[[https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/mapping/miryoku-kle-mapping-kyria.png]] + +An alternative subset mapping is also provided with the thumb keys shifted one +position in the direction of thumb extension. To select this mapping, append +~MIRYOKU_MAPPING=EXTENDED_THUMBS~ to the ~make~ command line when building. + +[[https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/mapping/miryoku-kle-mapping-kyria-extended_thumbs.png]] + + +To build for this keyboard, + +#+BEGIN_SRC sh :tangle no +make splitkb/kyria:manna-harbour_miryoku:flash +make splitkb/kyria:manna-harbour_miryoku:flash MIRYOKU_MAPPING=EXTENDED_THUMBS # extended thumb position +#+END_SRC + + +***** [[../../keyboards/splitkb/kyria/keymaps/manna-harbour_miryoku/config.h][keyboards/splitkb/kyria/keymaps/manna-harbour_miryoku/config.h]] + +Contains subset mapping. + +#+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../keyboards/splitkb/kyria/keymaps/manna-harbour_miryoku/config.h +// <
> + +<> + +#pragma once + +#define XXX KC_NO + +#if defined MIRYOKU_MAPPING_EXTENDED_THUMBS +#define LAYOUT_miryoku( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \ + N30, N31, K32, K33, K34, K35, K36, K37, N38, N39 \ +) \ +LAYOUT( \ +XXX, K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, XXX, \ +XXX, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, XXX, \ +XXX, K20, K21, K22, K23, K24, XXX, XXX, XXX, XXX, K25, K26, K27, K28, K29, XXX, \ + XXX, XXX, K32, K33, K34, K35, K36, K37, XXX, XXX \ +) +#else +#define LAYOUT_miryoku( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, \ + N30, N31, K32, K33, K34, K35, K36, K37, N38, N39 \ +) \ +LAYOUT( \ +XXX, K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, XXX, \ +XXX, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, XXX, \ +XXX, K20, K21, K22, K23, K24, XXX, XXX, XXX, XXX, K25, K26, K27, K28, K29, XXX, \ + XXX, K32, K33, K34, XXX, XXX, K35, K36, K37, XXX \ +) +#endif +#+END_SRC + + +***** [[../../keyboards/splitkb/kyria/keymaps/manna-harbour_miryoku/keymap.c][keyboards/splitkb/kyria/keymaps/manna-harbour_miryoku/keymap.c]] + +Required by the build system. + +#+BEGIN_SRC C :main no :noweb yes :padline no :tangle ../../keyboards/splitkb/kyria/keymaps/manna-harbour_miryoku/keymap.c +// <
> + +<> +#+END_SRC + + +**** torn To build for this keyboard, @@ -2489,7 +2560,7 @@ make torn:manna-harbour_miryoku:flash #+END_SRC -**** [[../../keyboards/torn/keymaps/manna-harbour_miryoku/config.h][keyboards/torn/keymaps/manna-harbour_miryoku/config.h]] +***** [[../../keyboards/torn/keymaps/manna-harbour_miryoku/config.h][keyboards/torn/keymaps/manna-harbour_miryoku/config.h]] Contains subset mapping. @@ -2517,7 +2588,7 @@ KC_NO, K20, K21, K22, K23, K24, K25, K26, K27, K28, K29 #+RESULTS: -**** [[../../keyboards/torn/keymaps/manna-harbour_miryoku/keymap.c][keyboards/torn/keymaps/manna-harbour_miryoku/keymap.c]] +***** [[../../keyboards/torn/keymaps/manna-harbour_miryoku/keymap.c][keyboards/torn/keymaps/manna-harbour_miryoku/keymap.c]] Required by the build system. @@ -2528,7 +2599,7 @@ Required by the build system. #+END_SRC -** Customisation +*** Customisation To add customisations to a keyboard or layout while importing the miryoku keymap, copy ~config.h~ and ~keymap.c~ from the keyboard or layout's @@ -2542,7 +2613,7 @@ layout and modify ~LAYOUT_miryoku~ in ~config.h~ referring to the keyboard or layout's ~LAYOUT~ macro. -*** Examples +**** Examples To use any of the examples, create a new branch from the miryoku development branch and follow the same steps as seen in the commit messages and code changes @@ -2550,28 +2621,28 @@ in the examples, making the appropriate changes for your keyboard and desired customisations. -**** Add Layers +***** Add Layers - https://github.com/manna-harbour/qmk_firmware/commits/miryoku-examples-add-layers/keyboards/crkbd/keymaps/miryoku-examples-add-layers -* Experimental Features +** Experimental Features -** Bilateral Combinations +*** Bilateral Combinations - [[https://github.com/manna-harbour/qmk_firmware/issues/29][Bilateral Combinations]] -** Retro Shift +*** Retro Shift - [[https://github.com/manna-harbour/qmk_firmware/issues/33][Retro Shift]] -* Documentation :noexport_1: +** Documentation -** QMK +*** QMK - https://docs.qmk.fm/ - https://docs.qmk.fm/#/config_options @@ -2588,18 +2659,13 @@ customisations. - https://docs.qmk.fm/#/tap_hold -** Org Mode +*** Org Mode - https://orgmode.org/ - https://orgmode.org/manual/Tables.html - https://orgmode.org/manual/Working-with-Source-Code.html -* Contact - -For feature requests or issues with code or documentation please -[[https://github.com/manna-harbour/qmk_firmware/issues/new][open an issue]]. - -For more general discussion please [[https://github.com/manna-harbour/manna-harbour/tree/main/contact][contact Manna Harbour]]. +** [[https://github.com/manna-harbour][https://raw.githubusercontent.com/manna-harbour/miryoku/master/data/logos/manna-harbour-boa-32.png]] diff --git a/users/manna-harbour_miryoku/rules.mk b/users/manna-harbour_miryoku/rules.mk index 809e630354..085f0b5019 100644 --- a/users/manna-harbour_miryoku/rules.mk +++ b/users/manna-harbour_miryoku/rules.mk @@ -1,6 +1,6 @@ # Copyright 2019 Manna Harbour # https://github.com/manna-harbour/miryoku -# generated from users/manna-harbour_miryoku/miryoku.org -*- buffer-read-only: t -*- +# generated -*- buffer-read-only: t -*- MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control From 79a34d8ec3073e49bae6d49fa15867b08299b652 Mon Sep 17 00:00:00 2001 From: hadi Date: Fri, 15 Oct 2021 23:06:43 -0700 Subject: [PATCH 294/595] [Keyboard] Adding CK60 and CK65 (#14737) Co-authored-by: Ryan --- keyboards/senselessclay/ck60/ck60.c | 17 +++ keyboards/senselessclay/ck60/ck60.h | 35 ++++++ keyboards/senselessclay/ck60/config.h | 119 ++++++++++++++++++ keyboards/senselessclay/ck60/info.json | 10 ++ .../ck60/keymaps/default/keymap.c | 51 ++++++++ .../senselessclay/ck60/keymaps/via/keymap.c | 51 ++++++++ .../senselessclay/ck60/keymaps/via/rules.mk | 1 + keyboards/senselessclay/ck60/readme.md | 19 +++ keyboards/senselessclay/ck60/rules.mk | 21 ++++ keyboards/senselessclay/ck65/ck65.c | 17 +++ keyboards/senselessclay/ck65/ck65.h | 35 ++++++ keyboards/senselessclay/ck65/config.h | 119 ++++++++++++++++++ keyboards/senselessclay/ck65/info.json | 10 ++ .../ck65/keymaps/default/keymap.c | 51 ++++++++ .../senselessclay/ck65/keymaps/via/keymap.c | 51 ++++++++ .../senselessclay/ck65/keymaps/via/rules.mk | 1 + keyboards/senselessclay/ck65/readme.md | 19 +++ keyboards/senselessclay/ck65/rules.mk | 21 ++++ 18 files changed, 648 insertions(+) create mode 100644 keyboards/senselessclay/ck60/ck60.c create mode 100644 keyboards/senselessclay/ck60/ck60.h create mode 100644 keyboards/senselessclay/ck60/config.h create mode 100644 keyboards/senselessclay/ck60/info.json create mode 100644 keyboards/senselessclay/ck60/keymaps/default/keymap.c create mode 100644 keyboards/senselessclay/ck60/keymaps/via/keymap.c create mode 100644 keyboards/senselessclay/ck60/keymaps/via/rules.mk create mode 100644 keyboards/senselessclay/ck60/readme.md create mode 100644 keyboards/senselessclay/ck60/rules.mk create mode 100644 keyboards/senselessclay/ck65/ck65.c create mode 100644 keyboards/senselessclay/ck65/ck65.h create mode 100644 keyboards/senselessclay/ck65/config.h create mode 100644 keyboards/senselessclay/ck65/info.json create mode 100644 keyboards/senselessclay/ck65/keymaps/default/keymap.c create mode 100644 keyboards/senselessclay/ck65/keymaps/via/keymap.c create mode 100644 keyboards/senselessclay/ck65/keymaps/via/rules.mk create mode 100644 keyboards/senselessclay/ck65/readme.md create mode 100644 keyboards/senselessclay/ck65/rules.mk diff --git a/keyboards/senselessclay/ck60/ck60.c b/keyboards/senselessclay/ck60/ck60.c new file mode 100644 index 0000000000..a2fe38aac7 --- /dev/null +++ b/keyboards/senselessclay/ck60/ck60.c @@ -0,0 +1,17 @@ +/* Copyright 2020 Hadi Iskandarani + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "ck60.h" \ No newline at end of file diff --git a/keyboards/senselessclay/ck60/ck60.h b/keyboards/senselessclay/ck60/ck60.h new file mode 100644 index 0000000000..fa83202dfa --- /dev/null +++ b/keyboards/senselessclay/ck60/ck60.h @@ -0,0 +1,35 @@ +/* Copyright 2020 Hadi Iskandarani + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +#define ____ KC_NO + +#define LAYOUT( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, \ + K400, K401, K402, K406, K410, K411, K412, K413 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, ____ }, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, ____ }, \ + { K400, K401, K402, ____, ____, ____, K406, ____, ____, ____, K410, K411, K412, K413 } \ +} diff --git a/keyboards/senselessclay/ck60/config.h b/keyboards/senselessclay/ck60/config.h new file mode 100644 index 0000000000..7e4a493701 --- /dev/null +++ b/keyboards/senselessclay/ck60/config.h @@ -0,0 +1,119 @@ +/* +Copyright 2020 Hadi Iskandarani + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4849 // HI +#define PRODUCT_ID 0x0601 // 60rgb (1) +#define DEVICE_VER 0x0000 // rev0 +#define MANUFACTURER senselessclay +#define PRODUCT ck60 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +/* rev0 */ +#define MATRIX_ROW_PINS { B3, B2, F1, F4, F5 } +#define MATRIX_COL_PINS { F0, D5, D3, D2, D1, D0, C7, C6, B6, B5, B4, D7, D6, D4 } + +//#define UNUSED_PINS { B0, B7, E6 } + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 + +/* RGB Backlighting */ +#define RGB_DI_PIN B1 +#define RGBLED_NUM 62 +#define RGBLIGHT_ANIMATIONS +#define RGBLIGHT_LIMIT_VAL 128 +#define RGBLIGHT_SLEEP +#define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_SWIRL+5 \ No newline at end of file diff --git a/keyboards/senselessclay/ck60/info.json b/keyboards/senselessclay/ck60/info.json new file mode 100644 index 0000000000..e188740c3c --- /dev/null +++ b/keyboards/senselessclay/ck60/info.json @@ -0,0 +1,10 @@ +{ + "keyboard_name": "CK60", + "url": "https://candykeys.com", + "maintainer": "hadi", + "layouts": { + "LAYOUT": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.75, "y":1, "w":1.25, "h":2}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":2.75}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":12.5, "y":4, "w":1.25}, {"x":13.75, "y":4, "w":1.25}] + } + } +} \ No newline at end of file diff --git a/keyboards/senselessclay/ck60/keymaps/default/keymap.c b/keyboards/senselessclay/ck60/keymaps/default/keymap.c new file mode 100644 index 0000000000..2ac1e06981 --- /dev/null +++ b/keyboards/senselessclay/ck60/keymaps/default/keymap.c @@ -0,0 +1,51 @@ +/* Copyright 2020 Hadi Iskandarani + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +enum layers { + _0, + _1, + _2, + _3, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_0] = LAYOUT( + /*Base*/ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_ENT, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL), + [_1] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_TRNS, + KC_CAPS, KC_VOLD, KC_MPRV, KC_MPLY, KC_MNXT, KC_VOLU, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_LEFT, KC_RIGHT, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + [_2] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + [_3] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) +}; \ No newline at end of file diff --git a/keyboards/senselessclay/ck60/keymaps/via/keymap.c b/keyboards/senselessclay/ck60/keymaps/via/keymap.c new file mode 100644 index 0000000000..2ac1e06981 --- /dev/null +++ b/keyboards/senselessclay/ck60/keymaps/via/keymap.c @@ -0,0 +1,51 @@ +/* Copyright 2020 Hadi Iskandarani + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +enum layers { + _0, + _1, + _2, + _3, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_0] = LAYOUT( + /*Base*/ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_ENT, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL), + [_1] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_TRNS, + KC_CAPS, KC_VOLD, KC_MPRV, KC_MPLY, KC_MNXT, KC_VOLU, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_LEFT, KC_RIGHT, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + [_2] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + [_3] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) +}; \ No newline at end of file diff --git a/keyboards/senselessclay/ck60/keymaps/via/rules.mk b/keyboards/senselessclay/ck60/keymaps/via/rules.mk new file mode 100644 index 0000000000..036bd6d1c3 --- /dev/null +++ b/keyboards/senselessclay/ck60/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes \ No newline at end of file diff --git a/keyboards/senselessclay/ck60/readme.md b/keyboards/senselessclay/ck60/readme.md new file mode 100644 index 0000000000..32700967da --- /dev/null +++ b/keyboards/senselessclay/ck60/readme.md @@ -0,0 +1,19 @@ +# ck60 + +A 60% keyboard implementation based around the ATMEGA32u4 with per-key RGB. + +* Keyboard Maintainer: [hadi](https://github.com/senselessclay) +* Hardware Supported: CK60 PCB +* Hardware Availability: https://candykeys.com/ + +Make example for this keyboard (after setting up your build environment): + + make senselessclay/ck60:default + +Flashing example for this keyboard: + + make senselessclay/ck60:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +If you'd like to reset the board into bootloader mode for flashing using [QMK Toolbox](https://github.com/qmk/qmk_toolbox), simply press the reset button directly above the controller assembly on the bottom side of the PCB. \ No newline at end of file diff --git a/keyboards/senselessclay/ck60/rules.mk b/keyboards/senselessclay/ck60/rules.mk new file mode 100644 index 0000000000..56ba35b4b8 --- /dev/null +++ b/keyboards/senselessclay/ck60/rules.mk @@ -0,0 +1,21 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output \ No newline at end of file diff --git a/keyboards/senselessclay/ck65/ck65.c b/keyboards/senselessclay/ck65/ck65.c new file mode 100644 index 0000000000..77128d9bf8 --- /dev/null +++ b/keyboards/senselessclay/ck65/ck65.c @@ -0,0 +1,17 @@ +/* Copyright 2020 Hadi Iskandarani + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "ck65.h" \ No newline at end of file diff --git a/keyboards/senselessclay/ck65/ck65.h b/keyboards/senselessclay/ck65/ck65.h new file mode 100644 index 0000000000..1d258ee346 --- /dev/null +++ b/keyboards/senselessclay/ck65/ck65.h @@ -0,0 +1,35 @@ +/* Copyright 2020 Hadi Iskandarani + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +#define ____ KC_NO + +#define LAYOUT( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K214, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, \ + K400, K401, K402, K406, K409, K410, K411, K412, K413, K414 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, ____, K214 }, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314 }, \ + { K400, K401, K402, ____, ____, ____, K406, ____, ____, K409, K410, K411, K412, K413, K414 } \ +} diff --git a/keyboards/senselessclay/ck65/config.h b/keyboards/senselessclay/ck65/config.h new file mode 100644 index 0000000000..772b2e410a --- /dev/null +++ b/keyboards/senselessclay/ck65/config.h @@ -0,0 +1,119 @@ +/* +Copyright 2020 Hadi Iskandarani + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4849 // HI +#define PRODUCT_ID 0x0651 // 65rgb (1) +#define DEVICE_VER 0x0000 // rev0 +#define MANUFACTURER senselessclay +#define PRODUCT ck65 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +/* rev0 */ +#define MATRIX_ROW_PINS { B3, B2, F1, F4, F5 } +#define MATRIX_COL_PINS { F0, D5, D3, D2, D1, D0, F7, C7, C6, B6, B5, B4, D7, D6, D4 } + +//#define UNUSED_PINS { B0, B7, E6 } + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 + +/* RGB Backlighting */ +#define RGB_DI_PIN B1 +#define RGBLED_NUM 69 +#define RGBLIGHT_ANIMATIONS +#define RGBLIGHT_LIMIT_VAL 122 +#define RGBLIGHT_SLEEP +#define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_SWIRL+5 \ No newline at end of file diff --git a/keyboards/senselessclay/ck65/info.json b/keyboards/senselessclay/ck65/info.json new file mode 100644 index 0000000000..fbcc959376 --- /dev/null +++ b/keyboards/senselessclay/ck65/info.json @@ -0,0 +1,10 @@ +{ + "keyboard_name": "CK65", + "url": "https://candykeys.com", + "maintainer": "hadi", + "layouts": { + "LAYOUT": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.75, "y":1, "w":1.25, "h":2}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2}, {"x":15, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] + } + } +} \ No newline at end of file diff --git a/keyboards/senselessclay/ck65/keymaps/default/keymap.c b/keyboards/senselessclay/ck65/keymaps/default/keymap.c new file mode 100644 index 0000000000..be627f899d --- /dev/null +++ b/keyboards/senselessclay/ck65/keymaps/default/keymap.c @@ -0,0 +1,51 @@ +/* Copyright 2020 Hadi Iskandarani + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +enum layers { + _0, + _1, + _2, + _3, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_0] = LAYOUT( + /*Base*/ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_ENT, KC_END, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_PGUP, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT), + [_1] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, + KC_CAPS, KC_VOLD, KC_MPRV, KC_MPLY, KC_MNXT, KC_VOLU, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_LEFT, KC_RIGHT, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + [_2] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + [_3] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) +}; \ No newline at end of file diff --git a/keyboards/senselessclay/ck65/keymaps/via/keymap.c b/keyboards/senselessclay/ck65/keymaps/via/keymap.c new file mode 100644 index 0000000000..be627f899d --- /dev/null +++ b/keyboards/senselessclay/ck65/keymaps/via/keymap.c @@ -0,0 +1,51 @@ +/* Copyright 2020 Hadi Iskandarani + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +enum layers { + _0, + _1, + _2, + _3, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_0] = LAYOUT( + /*Base*/ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_ENT, KC_END, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_PGUP, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT), + [_1] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, + KC_CAPS, KC_VOLD, KC_MPRV, KC_MPLY, KC_MNXT, KC_VOLU, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_LEFT, KC_RIGHT, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + [_2] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + [_3] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) +}; \ No newline at end of file diff --git a/keyboards/senselessclay/ck65/keymaps/via/rules.mk b/keyboards/senselessclay/ck65/keymaps/via/rules.mk new file mode 100644 index 0000000000..036bd6d1c3 --- /dev/null +++ b/keyboards/senselessclay/ck65/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes \ No newline at end of file diff --git a/keyboards/senselessclay/ck65/readme.md b/keyboards/senselessclay/ck65/readme.md new file mode 100644 index 0000000000..653266a59f --- /dev/null +++ b/keyboards/senselessclay/ck65/readme.md @@ -0,0 +1,19 @@ +# ck65 + +A 65% keyboard implementation based around the ATMEGA32u4 with per-key RGB. + +* Keyboard Maintainer: [hadi](https://github.com/senselessclay) +* Hardware Supported: CK65 PCB +* Hardware Availability: https://candykeys.com/ + +Make example for this keyboard (after setting up your build environment): + + make senselessclay/ck65:default + +Flashing example for this keyboard: + + make senselessclay/ck65:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +If you'd like to reset the board into bootloader mode for flashing using [QMK Toolbox](https://github.com/qmk/qmk_toolbox), simply press the reset button directly above the controller assembly on the bottom side of the PCB. \ No newline at end of file diff --git a/keyboards/senselessclay/ck65/rules.mk b/keyboards/senselessclay/ck65/rules.mk new file mode 100644 index 0000000000..56ba35b4b8 --- /dev/null +++ b/keyboards/senselessclay/ck65/rules.mk @@ -0,0 +1,21 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output \ No newline at end of file From 9e2e7737823e86612c3a90b485650e349cd251ea Mon Sep 17 00:00:00 2001 From: AKiwi92 <69772382+AKiwi92@users.noreply.github.com> Date: Sat, 16 Oct 2021 07:08:41 +0100 Subject: [PATCH 295/595] [Keyboard] Amended Some Pins - KiwiKeebs Macro V2 (#14824) Co-authored-by: Joel Challis Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> Co-authored-by: Drashna Jaelre Co-authored-by: Ryan Co-authored-by: Ash --- keyboards/kiwikeebs/macro_v2/config.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/keyboards/kiwikeebs/macro_v2/config.h b/keyboards/kiwikeebs/macro_v2/config.h index ab486fe54d..9ecc4d6686 100644 --- a/keyboards/kiwikeebs/macro_v2/config.h +++ b/keyboards/kiwikeebs/macro_v2/config.h @@ -40,15 +40,15 @@ along with this program. If not, see . * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) * */ -#define MATRIX_ROW_PINS { E6, D7 } -#define MATRIX_COL_PINS { F7, B1, B3, B2 } +#define MATRIX_ROW_PINS { B5, B4 } +#define MATRIX_COL_PINS { B6, C6, C7, D4 } #define UNUSED_PINS /* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW -#define ENCODERS_PAD_A { D1 } -#define ENCODERS_PAD_B { D0 } +#define ENCODERS_PAD_A { D7 } +#define ENCODERS_PAD_B { D6 } /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 From eddb206369e78ee0c34fab8ce64f5d3bab9e1b13 Mon Sep 17 00:00:00 2001 From: Takeshi ISHII <2170248+mtei@users.noreply.github.com> Date: Sat, 16 Oct 2021 17:31:09 +0900 Subject: [PATCH 296/595] add docs/ja/ja_doc_status.sh (#14402) --- docs/ja/ja_doc_status.sh | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) create mode 100644 docs/ja/ja_doc_status.sh diff --git a/docs/ja/ja_doc_status.sh b/docs/ja/ja_doc_status.sh new file mode 100644 index 0000000000..3dfbbd2bc6 --- /dev/null +++ b/docs/ja/ja_doc_status.sh @@ -0,0 +1,34 @@ +#! /bin/sh +# +# Script to display the Japanese translation status of documents +# +if [ ! -d docs/ja ]; then + echo "'docs/ja' not found." + echo "do:" + echo " cd \$(QMK_TOP)" + echo " ./docs/ja/ja_doc_status.sh" + exit 1 +fi + +en_docs=`cd docs;ls -1 [a-z]*.md` +ja_docs=`cd docs/ja;ls -1 [a-z]*.md` +en_count=`echo $en_docs | wc -w` +ja_count=`echo $ja_docs | wc -w` +echo "English documents $en_count files." +echo "Japanese documents $ja_count files." + +echo "Files that have not been translated yet:" +for docfile in $en_docs +do + if [ ! -f docs/ja/$docfile ]; then + wc docs/$docfile + fi +done | sort +echo "Files that have not been updated yet:" +grep --no-filename "^[ ]*git diff" docs/ja/*.md | while read cmd +do + cline=`echo $cmd | sh | wc -l` + if [ $cline -gt 0 ]; then + echo "$cline $cmd" + fi +done | sort From 9200baf593f7394d3ee74b42e15ba9fdcd06932f Mon Sep 17 00:00:00 2001 From: tangowithfoxtrot <5676771+tangowithfoxtrot@users.noreply.github.com> Date: Sat, 16 Oct 2021 11:03:12 -0500 Subject: [PATCH 297/595] [Keyboard] Fix minor typo in Ploopy Trackball Nano Docs (#14717) --- keyboards/ploopyco/trackball_nano/readme.md | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/keyboards/ploopyco/trackball_nano/readme.md b/keyboards/ploopyco/trackball_nano/readme.md index 8a293602a8..a82b3bc711 100644 --- a/keyboards/ploopyco/trackball_nano/readme.md +++ b/keyboards/ploopyco/trackball_nano/readme.md @@ -2,7 +2,7 @@ # Ploopy Trackball Nano -![Ploopyco Trackball Nano](https://www.ploopy.co/uploads/b/113cb4122f867acc306a72a2741c5237a9b1d0db13abfe4e8e394cd466c4a311/_MG_7710_1614037372.jpg) +![Ploopyco Trackball Nano](https://ploopy.co/wp-content/uploads/2021/06/2.jpg) It's a DIY, QMK Powered Trackball...Nano! @@ -28,7 +28,7 @@ Occasionally, new revisions of the PCB will be released. Every board comes with Match the firmware that you flash onto the board with the designator on the board. -# Customzing your Ploopy Nano Trackball +# Customizing your Ploopy Nano Trackball You can change the DPI/CPI or speed of the trackball by calling `adns_set_cpi` at any time. Additionally, there is a `DPI_CONFIG` macro that will cycle through an array of options for the DPI. This is set to 375, 750, and 1375, but can be changed. 750 is the default. @@ -51,4 +51,4 @@ When flashing the bootloader, use the following fuse settings: |----------|-------------| | Low | `0x5E` | | High | `0x99` | -| Extended | `0xC3` | \ No newline at end of file +| Extended | `0xC3` | From 3c0eeec755882f606fa9175677bd4d3d20082c07 Mon Sep 17 00:00:00 2001 From: Ryan Date: Sun, 17 Oct 2021 03:44:56 +1100 Subject: [PATCH 298/595] Try to clarify "number of elements in info.json does not match" error (#14844) --- lib/python/qmk/info.py | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/lib/python/qmk/info.py b/lib/python/qmk/info.py index 1b4c42ff41..350e5e2178 100644 --- a/lib/python/qmk/info.py +++ b/lib/python/qmk/info.py @@ -691,8 +691,8 @@ def merge_info_jsons(keyboard, info_data): if layout_name in info_data['layouts']: if len(info_data['layouts'][layout_name]['layout']) != len(layout['layout']): - msg = '%s: %s: Number of elements in info.json does not match! info.json:%s != %s:%s' - _log_error(info_data, msg % (info_data['keyboard_folder'], layout_name, len(layout['layout']), layout_name, len(info_data['layouts'][layout_name]['layout']))) + msg = 'Number of keys for %s does not match! info.json specifies %d keys, C macro specifies %d' + _log_error(info_data, msg % (layout_name, len(layout['layout']), len(info_data['layouts'][layout_name]['layout']))) else: for new_key, existing_key in zip(layout['layout'], info_data['layouts'][layout_name]['layout']): existing_key.update(new_key) From 772f67484f49a48b7b408a4128006aa022b45cf0 Mon Sep 17 00:00:00 2001 From: Peter Park Date: Sat, 16 Oct 2021 19:22:35 -0700 Subject: [PATCH 299/595] [Keyboard] Update Support for The Uni (#14569) Co-authored-by: Drashna Jaelre Co-authored-by: ridingqwerty Co-authored-by: Ryan Co-authored-by: Peter Park --- keyboards/the_uni/keymaps/default/keymap.c | 53 ++--------------- keyboards/the_uni/keymaps/qwerty/keymap.c | 57 ++----------------- keyboards/the_uni/{ => pro_micro}/config.h | 0 keyboards/the_uni/pro_micro/pro_micro.c | 18 ++++++ .../{the_uni.h => pro_micro/pro_micro.h} | 0 keyboards/the_uni/pro_micro/readme.md | 20 +++++++ keyboards/the_uni/pro_micro/rules.mk | 22 +++++++ keyboards/the_uni/readme.md | 30 +++++++--- keyboards/the_uni/rules.mk | 21 ------- keyboards/the_uni/usb_c/config.h | 52 +++++++++++++++++ keyboards/the_uni/usb_c/readme.md | 20 +++++++ keyboards/the_uni/usb_c/rules.mk | 22 +++++++ .../the_uni/{the_uni.c => usb_c/usb_c.c} | 2 +- keyboards/the_uni/usb_c/usb_c.h | 30 ++++++++++ 14 files changed, 217 insertions(+), 130 deletions(-) rename keyboards/the_uni/{ => pro_micro}/config.h (100%) create mode 100644 keyboards/the_uni/pro_micro/pro_micro.c rename keyboards/the_uni/{the_uni.h => pro_micro/pro_micro.h} (100%) create mode 100644 keyboards/the_uni/pro_micro/readme.md create mode 100644 keyboards/the_uni/pro_micro/rules.mk delete mode 100644 keyboards/the_uni/rules.mk create mode 100644 keyboards/the_uni/usb_c/config.h create mode 100644 keyboards/the_uni/usb_c/readme.md create mode 100644 keyboards/the_uni/usb_c/rules.mk rename keyboards/the_uni/{the_uni.c => usb_c/usb_c.c} (96%) create mode 100644 keyboards/the_uni/usb_c/usb_c.h diff --git a/keyboards/the_uni/keymaps/default/keymap.c b/keyboards/the_uni/keymaps/default/keymap.c index 01674d9486..492c7a3c94 100644 --- a/keyboards/the_uni/keymaps/default/keymap.c +++ b/keyboards/the_uni/keymaps/default/keymap.c @@ -19,59 +19,18 @@ along with this program. If not, see . #include "keymap_steno.h" enum uni_layers { -/* - _QWERTY, - _CHOOSE, -*/ - _PLOVER, -}; - -/* -enum uni_keycodes { - PLOVER, - QWERTY + _PLOVER, }; -*/ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -/* - [_QWERTY] = LAYOUT( - KC_Q, KC_W, KC_E, KC_R, LT(_CHOOSE, KC_T), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, - KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, - KC_1, KC_C, KC_V, KC_N, KC_M, KC_2), - [_CHOOSE] = LAYOUT( - _______, _______, _______, _______, _______, PLOVER, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______), -*/ - [_PLOVER] = LAYOUT( - STN_S1, STN_TL, STN_PL, STN_HL, STN_ST1, STN_ST3, STN_FR, STN_PR, STN_LR, STN_TR, STN_DR , - STN_S2, STN_KL, STN_WL, STN_RL, STN_ST2, STN_ST4, STN_RR, STN_BR, STN_GR, STN_SR, STN_ZR , - STN_N1, STN_A, STN_O, STN_E, STN_U, STN_N2), + [_PLOVER] = LAYOUT( + STN_S1, STN_TL, STN_PL, STN_HL, STN_ST1, STN_ST3, STN_FR, STN_PR, STN_LR, STN_TR, STN_DR , + STN_S2, STN_KL, STN_WL, STN_RL, STN_ST2, STN_ST4, STN_RR, STN_BR, STN_GR, STN_SR, STN_ZR , + STN_N1, STN_A, STN_O, STN_E, STN_U, STN_N2), }; -/* -switch (keycode) { - bool process_record_user(uint16_t keycode, keyrecord_t *record) { - case PLOVER: - if (!record->event.pressed) { - layer_on(_PLOVER); - } - return false; - break; - case QWERTY: - if (!record->event.pressed) { - layer_on(_QWERTY); - } - return false; - break; - } - return true; - } -*/ - void matrix_init_user() { - steno_set_mode(STENO_MODE_GEMINI); // or STENO_MODE_BOLT + steno_set_mode(STENO_MODE_GEMINI); // or STENO_MODE_BOLT } diff --git a/keyboards/the_uni/keymaps/qwerty/keymap.c b/keyboards/the_uni/keymaps/qwerty/keymap.c index 3eaac57f3d..b2f03a3613 100644 --- a/keyboards/the_uni/keymaps/qwerty/keymap.c +++ b/keyboards/the_uni/keymaps/qwerty/keymap.c @@ -16,62 +16,15 @@ along with this program. If not, see . */ #include QMK_KEYBOARD_H -//#include "keymap_steno.h" enum uni_layers { - _QWERTY, -/* - _CHOOSE, - _PLOVER, -*/ + _QWERTY, }; -/* -enum uni_keycodes { - PLOVER, - QWERTY -}; -*/ - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_QWERTY] = LAYOUT( - KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, - KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, - KC_1, KC_C, KC_V, KC_N, KC_M, KC_2), -/* - - [_CHOOSE] = LAYOUT( - _______, _______, _______, _______, _______, PLOVER, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______), - [_PLOVER] = LAYOUT( - STN_S1, STN_TL, STN_PL, STN_HL, STN_ST1, STN_ST3, STN_FR, STN_PR, STN_LR, STN_TR, STN_DR , - STN_S2, STN_KL, STN_WL, STN_RL, STN_ST2, STN_ST4, STN_RR, STN_BR, STN_GR, STN_SR, STN_ZR , - STN_N1, STN_A, STN_O, STN_E, STN_U, STN_N2), -*/ + [_QWERTY] = LAYOUT( + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, + KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_1, KC_C, KC_V, KC_N, KC_M, KC_2), }; - -/* -switch (keycode) { - bool process_record_user(uint16_t keycode, keyrecord_t *record) { - case PLOVER: - if (!record->event.pressed) { - layer_on(_PLOVER); - } - return false; - break; - case QWERTY: - if (!record->event.pressed) { - layer_on(_QWERTY); - } - return false; - break; - } - return true; - } -*/ - - void matrix_init_user() { - //steno_set_mode(STENO_MODE_GEMINI); // or STENO_MODE_BOLT - } diff --git a/keyboards/the_uni/config.h b/keyboards/the_uni/pro_micro/config.h similarity index 100% rename from keyboards/the_uni/config.h rename to keyboards/the_uni/pro_micro/config.h diff --git a/keyboards/the_uni/pro_micro/pro_micro.c b/keyboards/the_uni/pro_micro/pro_micro.c new file mode 100644 index 0000000000..3d5b3b23bb --- /dev/null +++ b/keyboards/the_uni/pro_micro/pro_micro.c @@ -0,0 +1,18 @@ +/* +Copyright 2021 Peter C. Park + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include "pro_micro.h" diff --git a/keyboards/the_uni/the_uni.h b/keyboards/the_uni/pro_micro/pro_micro.h similarity index 100% rename from keyboards/the_uni/the_uni.h rename to keyboards/the_uni/pro_micro/pro_micro.h diff --git a/keyboards/the_uni/pro_micro/readme.md b/keyboards/the_uni/pro_micro/readme.md new file mode 100644 index 0000000000..d6b6231561 --- /dev/null +++ b/keyboards/the_uni/pro_micro/readme.md @@ -0,0 +1,20 @@ +# The Uni + +- Keyboard Maintainer: [Peter](https://github.com/petercpark) +- Link to Keyboard Files: [The_Uni](https://github.com/petercpark/The_Uni) +- Hardware Supported: + - The Uni v1 and v2 (pro_micro) +- Hardware Availability: [https://www.stenokeyboards.com](https://www.stenokeyboards.com) + +# Bootloader + +Enter the bootloader by: + +* **Physical reset button**: On the Uni v3, briefly press the button on the back of the PCB. +* **Reset Pads**: Uni v1 and v2 have pins/pads you must short instead (RST to GND). + +Make examples for this keyboard (after setting up your build environment): + + make the_uni/pro_micro:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/the_uni/pro_micro/rules.mk b/keyboards/the_uni/pro_micro/rules.mk new file mode 100644 index 0000000000..1a595e91e4 --- /dev/null +++ b/keyboards/the_uni/pro_micro/rules.mk @@ -0,0 +1,22 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = caterina + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = no # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +STENO_ENABLE = yes diff --git a/keyboards/the_uni/readme.md b/keyboards/the_uni/readme.md index 730ea2483d..cd1c99e435 100644 --- a/keyboards/the_uni/readme.md +++ b/keyboards/the_uni/readme.md @@ -1,19 +1,31 @@ # The Uni -![The Uni](https://raw.githubusercontent.com/petercpark/The_Uni/main/Pics/layout.png) -![The Uni Closeup](https://github.com/petercpark/The_Uni/blob/main/Pics/close-up-uni.jpg?raw=true) +​ +![Layout](https://docs.stenokeyboards.com/images/uni-layout.png) +![The Uni v2](https://github.com/petercpark/The_Uni/blob/main/Pics/uni%20v2/uni-v2.JPG?raw=true) A compact unibody split ortholinear keyboard made specifically for stenography. -- Keyboard Maintainer: [Peter C. Park](https://github.com/petercpark) -- Link to Keyboard Files: [The_Uni](https://github.com/petercpark/The_Uni) -- Hardware Supported: The Uni v1 and v2 (pro micro or equivalent) -- Hardware Availability: [website](https://www.stenokeyboards.com) +- Keyboard Maintainer: [Peter](https://github.com/petercpark) +- Link to Keyboard Files (pro_micro version): [https://github.com/petercpark/The_Uni](https://github.com/petercpark/The_Uni) +- Hardware Supported: -Make example for this keyboard (after setting up your build environment): + - The Uni v1 and v2 (pro_micro) + - The Uni v3 (usb_c) - make the_uni:default +- Hardware Availability: [https://www.stenokeyboards.com](https://www.stenokeyboards.com) -To enter the bootloader, short the rst and gnd pins with a conductive material such as a tweezer or a wire. Uni v2 will have reset pads next to the pro micro so you can short these pads to reset the pro micro. +# Bootloader + +Enter the bootloader by: + +* **Physical reset button**: On the Uni v3, briefly press the button on the back of the PCB. +* **Reset Pads**: Uni v1 and v2 have pins/pads you must short instead (RST to GND). + +Make examples for this keyboard (after setting up your build environment): + + make the_uni/pro_micro:default + + make the_uni/usb_c:default See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/the_uni/rules.mk b/keyboards/the_uni/rules.mk deleted file mode 100644 index 36c52b6777..0000000000 --- a/keyboards/the_uni/rules.mk +++ /dev/null @@ -1,21 +0,0 @@ -# MCU name -MCU = atmega32u4 - -# Bootloader selection -BOOTLOADER = atmel-dfu - - -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite -CONSOLE_ENABLE = no # Console for debug -COMMAND_ENABLE = no # Commands for debug and configuration -SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend -NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work -BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -RGBLIGHT_ENABLE = no -FORCE_NKRO = yes -EXTRAKEY_ENABLE = no -MOUSEKEY_ENABLE = no # Mouse keys -STENO_ENABLE = yes diff --git a/keyboards/the_uni/usb_c/config.h b/keyboards/the_uni/usb_c/config.h new file mode 100644 index 0000000000..3110c0d821 --- /dev/null +++ b/keyboards/the_uni/usb_c/config.h @@ -0,0 +1,52 @@ +/* +Copyright 2021 Peter C. Park + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x9000 +#define PRODUCT_ID 0x0001 +#define DEVICE_VER 0x0002 +#define MANUFACTURER stenokeyboards +#define PRODUCT The Uni + +/* key matrix size */ +#define MATRIX_ROWS 3 +#define MATRIX_COLS 11 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { B7, D6, C7 } +#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, D5, D3, D2, D1, D0, D4 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + + +/*force the nkro if it does not work*/ +#define FORCE_NKRO diff --git a/keyboards/the_uni/usb_c/readme.md b/keyboards/the_uni/usb_c/readme.md new file mode 100644 index 0000000000..23895db39f --- /dev/null +++ b/keyboards/the_uni/usb_c/readme.md @@ -0,0 +1,20 @@ +# The Uni v3 Firmware + +- Keyboard Maintainer: [Peter](https://github.com/petercpark) +- Link to Keyboard Files: Not Available +- Hardware Supported: + - The Uni v3 (usb_c) +- Hardware Availability: [https://www.stenokeyboards.com](https://www.stenokeyboards.com) + +## Bootloader + +Enter the bootloader by: + +* **Physical reset button**: On the Uni v3, briefly press the button on the back of the PCB. +* **Reset Pads**: Uni v1 and v2 have pins/pads you must short instead (RST to GND). + +Make examples for this keyboard (after setting up your build environment): + + make the_uni/usb_c:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/the_uni/usb_c/rules.mk b/keyboards/the_uni/usb_c/rules.mk new file mode 100644 index 0000000000..e5d2f2e042 --- /dev/null +++ b/keyboards/the_uni/usb_c/rules.mk @@ -0,0 +1,22 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = no # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +STENO_ENABLE = yes diff --git a/keyboards/the_uni/the_uni.c b/keyboards/the_uni/usb_c/usb_c.c similarity index 96% rename from keyboards/the_uni/the_uni.c rename to keyboards/the_uni/usb_c/usb_c.c index b99b06830c..e690d0a886 100644 --- a/keyboards/the_uni/the_uni.c +++ b/keyboards/the_uni/usb_c/usb_c.c @@ -15,4 +15,4 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#include "the_uni.h" +#include "usb_c.h" diff --git a/keyboards/the_uni/usb_c/usb_c.h b/keyboards/the_uni/usb_c/usb_c.h new file mode 100644 index 0000000000..9371c3a241 --- /dev/null +++ b/keyboards/the_uni/usb_c/usb_c.h @@ -0,0 +1,30 @@ +/* +Copyright 2021 Peter C. Park + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "quantum.h" + +#define LAYOUT( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, \ + K202, K203, K204, K205, K206, K207 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110 }, \ + { KC_NO, KC_NO, K202, K203, K204, K205, K206, K207, KC_NO, KC_NO, KC_NO } \ +} From b8ca0af06af64924f1490ebb6b536b25e471081a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=E2=80=8BAndrzej=20Ressel?= Date: Sun, 17 Oct 2021 04:51:02 +0200 Subject: [PATCH 300/595] [Keyboard] Add SpiderIsland 25 key keyboard (#14793) Co-authored-by: Ryan --- keyboards/spiderisland/winry25tc/config.h | 41 +++++++++++++++++++ keyboards/spiderisland/winry25tc/info.json | 36 ++++++++++++++++ .../winry25tc/keymaps/default/keymap.c | 39 ++++++++++++++++++ keyboards/spiderisland/winry25tc/readme.md | 14 +++++++ keyboards/spiderisland/winry25tc/rules.mk | 22 ++++++++++ keyboards/spiderisland/winry25tc/winry25tc.c | 17 ++++++++ keyboards/spiderisland/winry25tc/winry25tc.h | 33 +++++++++++++++ 7 files changed, 202 insertions(+) create mode 100644 keyboards/spiderisland/winry25tc/config.h create mode 100644 keyboards/spiderisland/winry25tc/info.json create mode 100644 keyboards/spiderisland/winry25tc/keymaps/default/keymap.c create mode 100644 keyboards/spiderisland/winry25tc/readme.md create mode 100644 keyboards/spiderisland/winry25tc/rules.mk create mode 100644 keyboards/spiderisland/winry25tc/winry25tc.c create mode 100644 keyboards/spiderisland/winry25tc/winry25tc.h diff --git a/keyboards/spiderisland/winry25tc/config.h b/keyboards/spiderisland/winry25tc/config.h new file mode 100644 index 0000000000..1e7ff4c63b --- /dev/null +++ b/keyboards/spiderisland/winry25tc/config.h @@ -0,0 +1,41 @@ +/* Copyright 2021 Andrzej Ressel (andrzej.ressel@gmail.com) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x0000 +#define DEVICE_VER 0x0001 +#define MANUFACTURER SpiderIsland +#define PRODUCT Winry 25tc + +#define MATRIX_ROWS 5 +#define MATRIX_COLS 5 + +#define MATRIX_ROW_PINS { E6, F0, D6, D2, B6 } +#define MATRIX_COL_PINS { F5, C7, B7, B2, B4 } + +#define DIODE_DIRECTION COL2ROW + +#define RGB_DI_PIN D5 +#define RGBLED_NUM 40 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 +#define RGBLIGHT_LIMIT_VAL 150 /* The maximum brightness level */ diff --git a/keyboards/spiderisland/winry25tc/info.json b/keyboards/spiderisland/winry25tc/info.json new file mode 100644 index 0000000000..8e503bc74a --- /dev/null +++ b/keyboards/spiderisland/winry25tc/info.json @@ -0,0 +1,36 @@ +{ + "keyboard_name": "Winry 25tc", + "url": "", + "maintainer": "qmk", + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"K00 (E6,F5)", "x":0, "y":0}, + {"label":"K01 (E6,C7)", "x":1, "y":0}, + {"label":"K02 (E6,B7)", "x":2, "y":0}, + {"label":"K03 (E6,B2)", "x":3, "y":0}, + {"label":"K04 (E6,B4)", "x":4, "y":0}, + {"label":"K10 (F0,F5)", "x":0, "y":1}, + {"label":"K11 (F0,C7)", "x":1, "y":1}, + {"label":"K12 (F0,B7)", "x":2, "y":1}, + {"label":"K13 (F0,B2)", "x":3, "y":1}, + {"label":"K14 (F0,B4)", "x":4, "y":1}, + {"label":"K20 (D6,F5)", "x":0, "y":2}, + {"label":"K21 (D6,C7)", "x":1, "y":2}, + {"label":"K22 (D6,B7)", "x":2, "y":2}, + {"label":"K23 (D6,B2)", "x":3, "y":2}, + {"label":"K24 (D6,B4)", "x":4, "y":2}, + {"label":"K30 (D2,F5)", "x":0, "y":3}, + {"label":"K31 (D2,C7)", "x":1, "y":3}, + {"label":"K32 (D2,B7)", "x":2, "y":3}, + {"label":"K33 (D2,B2)", "x":3, "y":3}, + {"label":"K34 (D2,B4)", "x":4, "y":3}, + {"label":"K40 (B6,F5)", "x":0, "y":4}, + {"label":"K41 (B6,C7)", "x":1, "y":4}, + {"label":"K42 (B6,B7)", "x":2, "y":4}, + {"label":"K43 (B6,B2)", "x":3, "y":4}, + {"label":"K44 (B6,B4)", "x":4, "y":4} + ] + } + } +} diff --git a/keyboards/spiderisland/winry25tc/keymaps/default/keymap.c b/keyboards/spiderisland/winry25tc/keymaps/default/keymap.c new file mode 100644 index 0000000000..ec1d0f42ed --- /dev/null +++ b/keyboards/spiderisland/winry25tc/keymaps/default/keymap.c @@ -0,0 +1,39 @@ +/* Copyright 2021 Andrzej Ressel (andrzej.ressel@gmail.com) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +enum my_layers { + _FIRST_LAYER, + _SECOND_LAYER +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_FIRST_LAYER] = LAYOUT( + KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, KC_ESC, + KC_P7, KC_P8, KC_P9, KC_PPLS, RGB_TOG, + KC_P4, KC_P5, KC_P6, KC_PENT, RGB_MOD, + KC_P1, KC_P2, KC_P3, KC_UP, MO(_SECOND_LAYER), + KC_P0, KC_PDOT, KC_LEFT, KC_DOWN, KC_RGHT + ), + [_SECOND_LAYER] = LAYOUT( + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, + KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, + KC_F11, KC_F12, KC_MUTE, KC_VOLD, KC_VOLU, + KC_MPLY, KC_MSTP, KC_MPRV, KC_MNXT, _______, + KC_RSFT, KC_RALT, KC_RGUI, KC_APP, KC_RCTL + ), +}; diff --git a/keyboards/spiderisland/winry25tc/readme.md b/keyboards/spiderisland/winry25tc/readme.md new file mode 100644 index 0000000000..45ba0bd5a4 --- /dev/null +++ b/keyboards/spiderisland/winry25tc/readme.md @@ -0,0 +1,14 @@ +# SpiderIsland 25-key RGB Backlight Hot Swap Mechanical Keyboard + +Keyboard from [SpiderIsland on AliExpress](https://a.aliexpress.com/_dVJsSpR). Seller provides [kbfirmware](https://kbfirmware.com/) JSON config that was converted to QMK. + +* Keyboard Maintainer: [andrzejressel](https://github.com/andrzejressel) +* Hardware Availability: https://aliexpress.com/item/1005001523579896.html + +Make example for this keyboard (after setting up your build environment): + + make spiderisland/winry25tc:default + +**Reset Key**: Located on the other side of the keyboard. + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). \ No newline at end of file diff --git a/keyboards/spiderisland/winry25tc/rules.mk b/keyboards/spiderisland/winry25tc/rules.mk new file mode 100644 index 0000000000..4eb00f7407 --- /dev/null +++ b/keyboards/spiderisland/winry25tc/rules.mk @@ -0,0 +1,22 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow + +KEY_LOCK_ENABLE = yes # Enable KC_LOCK support diff --git a/keyboards/spiderisland/winry25tc/winry25tc.c b/keyboards/spiderisland/winry25tc/winry25tc.c new file mode 100644 index 0000000000..938dadaf8f --- /dev/null +++ b/keyboards/spiderisland/winry25tc/winry25tc.c @@ -0,0 +1,17 @@ +/* Copyright 2021 Andrzej Ressel (andrzej.ressel@gmail.com) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "winry25tc.h" diff --git a/keyboards/spiderisland/winry25tc/winry25tc.h b/keyboards/spiderisland/winry25tc/winry25tc.h new file mode 100644 index 0000000000..5498dd8d6b --- /dev/null +++ b/keyboards/spiderisland/winry25tc/winry25tc.h @@ -0,0 +1,33 @@ +/* Copyright 2021 Andrzej Ressel (andrzej.ressel@gmail.com) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +#define LAYOUT( \ + K00, K01, K02, K03, K04, \ + K10, K11, K12, K13, K14, \ + K20, K21, K22, K23, K24, \ + K30, K31, K32, K33, K34, \ + K40, K41, K42, K43, K44 \ +) { \ + { K00, K01, K02, K03, K04 }, \ + { K10, K11, K12, K13, K14 }, \ + { K20, K21, K22, K23, K24 }, \ + { K30, K31, K32, K33, K34 }, \ + { K40, K41, K42, K43, K44 }, \ +} From d2f9e352c81fbf3fb04c8978dbe9151ded10cc09 Mon Sep 17 00:00:00 2001 From: Roger Date: Sat, 16 Oct 2021 21:26:13 -0700 Subject: [PATCH 301/595] [Keymap] added media controls, copy and paste; moved print screen (#14850) --- .../keebio/quefrency/keymaps/rogthefrog/config.h | 2 +- .../keebio/quefrency/keymaps/rogthefrog/keymap.c | 12 ++++++------ 2 files changed, 7 insertions(+), 7 deletions(-) diff --git a/keyboards/keebio/quefrency/keymaps/rogthefrog/config.h b/keyboards/keebio/quefrency/keymaps/rogthefrog/config.h index 583a363b91..2332c4f523 100644 --- a/keyboards/keebio/quefrency/keymaps/rogthefrog/config.h +++ b/keyboards/keebio/quefrency/keymaps/rogthefrog/config.h @@ -4,7 +4,7 @@ This is the c configuration file for the keymap Copyright 2012 Jun Wako Copyright 2015 Jack Humbert Copyright 2018 Danny Nguyen -Copyright 2020 Roger Billerey-Mosier +Copyright 2021 Roger Billerey-Mosier This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by diff --git a/keyboards/keebio/quefrency/keymaps/rogthefrog/keymap.c b/keyboards/keebio/quefrency/keymaps/rogthefrog/keymap.c index f4a306f70f..0cc0cfe2b4 100644 --- a/keyboards/keebio/quefrency/keymaps/rogthefrog/keymap.c +++ b/keyboards/keebio/quefrency/keymaps/rogthefrog/keymap.c @@ -1,5 +1,5 @@ /* - Copyright 2020 Roger Billerey-Mosier + Copyright 2021 Roger Billerey-Mosier This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -34,13 +34,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_END, KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RCTL, KC_UP, KC_PGDN, - KC_LCTL, KC_LGUI, KC_LALT, KC_ENT, MO(_FN1), KC_SPC, KC_NO, KC_APP, KC_PSCR, KC_DEL, KC_LEFT, KC_DOWN, KC_RGHT - ), + KC_LCTL, KC_LGUI, KC_LALT, KC_ENT, MO(_FN1), KC_SPC, KC_NO, LCTL(KC_C), LCTL(KC_V), KC_DEL, KC_LEFT, KC_DOWN, KC_RGHT + ), [_FN1] = LAYOUT_65( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, _______, + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, KC_PSCR, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_CAPS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, _______, + _______, _______, _______, _______, _______, KC_MPLY, _______, _______, _______, KC_MUTE, KC_MPRV, KC_VOLD, KC_MNXT ) }; From bd2f8ab88a8d1598cde47d3238ae8a49f1d7fbf9 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Sun, 17 Oct 2021 22:37:48 +0100 Subject: [PATCH 302/595] Infer more when building features (#13890) --- build_keyboard.mk | 1 + build_test.mk | 1 + common_features.mk | 83 --------------------------------------------- generic_features.mk | 48 ++++++++++++++++++++++++++ 4 files changed, 50 insertions(+), 83 deletions(-) create mode 100644 generic_features.mk diff --git a/build_keyboard.mk b/build_keyboard.mk index 6910458532..36807911d8 100644 --- a/build_keyboard.mk +++ b/build_keyboard.mk @@ -399,6 +399,7 @@ VPATH += $(KEYBOARD_PATHS) VPATH += $(COMMON_VPATH) include common_features.mk +include generic_features.mk include $(TMK_PATH)/protocol.mk include $(TMK_PATH)/common.mk include bootloader.mk diff --git a/build_test.mk b/build_test.mk index 96487c01fa..dd66a008ee 100644 --- a/build_test.mk +++ b/build_test.mk @@ -52,6 +52,7 @@ include tests/$(TEST)/rules.mk endif include common_features.mk +include generic_features.mk include $(TMK_PATH)/common.mk include $(QUANTUM_PATH)/debounce/tests/rules.mk include $(QUANTUM_PATH)/sequencer/tests/rules.mk diff --git a/common_features.mk b/common_features.mk index 6a9754e58e..aff91641e4 100644 --- a/common_features.mk +++ b/common_features.mk @@ -44,11 +44,6 @@ else ifeq ($(strip $(DEBUG_MATRIX_SCAN_RATE_ENABLE)), api) OPT_DEFS += -DDEBUG_MATRIX_SCAN_RATE endif -ifeq ($(strip $(COMMAND_ENABLE)), yes) - SRC += $(QUANTUM_DIR)/command.c - OPT_DEFS += -DCOMMAND_ENABLE -endif - AUDIO_ENABLE ?= no ifeq ($(strip $(AUDIO_ENABLE)), yes) ifeq ($(PLATFORM),CHIBIOS) @@ -118,12 +113,6 @@ ifeq ($(strip $(POINTING_DEVICE_ENABLE)), yes) SRC += $(QUANTUM_DIR)/pointing_device.c endif -ifeq ($(strip $(PROGRAMMABLE_BUTTON_ENABLE)), yes) - OPT_DEFS += -DPROGRAMMABLE_BUTTON_ENABLE - SRC += $(QUANTUM_DIR)/programmable_button.c - SRC += $(QUANTUM_DIR)/process_keycode/process_programmable_button.c -endif - VALID_EEPROM_DRIVER_TYPES := vendor custom transient i2c spi EEPROM_DRIVER ?= vendor ifeq ($(filter $(EEPROM_DRIVER),$(VALID_EEPROM_DRIVER_TYPES)),) @@ -419,21 +408,6 @@ ifeq ($(strip $(TERMINAL_ENABLE)), yes) OPT_DEFS += -DUSER_PRINT endif -ifeq ($(strip $(WPM_ENABLE)), yes) - SRC += $(QUANTUM_DIR)/wpm.c - OPT_DEFS += -DWPM_ENABLE -endif - -ifeq ($(strip $(ENCODER_ENABLE)), yes) - SRC += $(QUANTUM_DIR)/encoder.c - OPT_DEFS += -DENCODER_ENABLE -endif - -ifeq ($(strip $(VELOCIKEY_ENABLE)), yes) - OPT_DEFS += -DVELOCIKEY_ENABLE - SRC += $(QUANTUM_DIR)/velocikey.c -endif - ifeq ($(strip $(VIA_ENABLE)), yes) DYNAMIC_KEYMAP_ENABLE := yes RAW_ENABLE := yes @@ -442,16 +416,6 @@ ifeq ($(strip $(VIA_ENABLE)), yes) OPT_DEFS += -DVIA_ENABLE endif -ifeq ($(strip $(DYNAMIC_KEYMAP_ENABLE)), yes) - OPT_DEFS += -DDYNAMIC_KEYMAP_ENABLE - SRC += $(QUANTUM_DIR)/dynamic_keymap.c -endif - -ifeq ($(strip $(DIP_SWITCH_ENABLE)), yes) - OPT_DEFS += -DDIP_SWITCH_ENABLE - SRC += $(QUANTUM_DIR)/dip_switch.c -endif - VALID_MAGIC_TYPES := yes lite BOOTMAGIC_ENABLE ?= no ifneq ($(strip $(BOOTMAGIC_ENABLE)), no) @@ -602,54 +566,12 @@ ifeq ($(strip $(UNICODE_COMMON)), yes) SRC += $(QUANTUM_DIR)/process_keycode/process_unicode_common.c endif -SPACE_CADET_ENABLE ?= yes -ifeq ($(strip $(SPACE_CADET_ENABLE)), yes) - SRC += $(QUANTUM_DIR)/process_keycode/process_space_cadet.c - OPT_DEFS += -DSPACE_CADET_ENABLE -endif - MAGIC_ENABLE ?= yes ifeq ($(strip $(MAGIC_ENABLE)), yes) SRC += $(QUANTUM_DIR)/process_keycode/process_magic.c OPT_DEFS += -DMAGIC_KEYCODE_ENABLE endif -GRAVE_ESC_ENABLE ?= yes -ifeq ($(strip $(GRAVE_ESC_ENABLE)), yes) - SRC += $(QUANTUM_DIR)/process_keycode/process_grave_esc.c - OPT_DEFS += -DGRAVE_ESC_ENABLE -endif - -ifeq ($(strip $(DYNAMIC_MACRO_ENABLE)), yes) - SRC += $(QUANTUM_DIR)/process_keycode/process_dynamic_macro.c - OPT_DEFS += -DDYNAMIC_MACRO_ENABLE -endif - -ifeq ($(strip $(COMBO_ENABLE)), yes) - SRC += $(QUANTUM_DIR)/process_keycode/process_combo.c - OPT_DEFS += -DCOMBO_ENABLE -endif - -ifeq ($(strip $(KEY_OVERRIDE_ENABLE)), yes) - SRC += $(QUANTUM_DIR)/process_keycode/process_key_override.c - OPT_DEFS += -DKEY_OVERRIDE_ENABLE -endif - -ifeq ($(strip $(TAP_DANCE_ENABLE)), yes) - SRC += $(QUANTUM_DIR)/process_keycode/process_tap_dance.c - OPT_DEFS += -DTAP_DANCE_ENABLE -endif - -ifeq ($(strip $(KEY_LOCK_ENABLE)), yes) - SRC += $(QUANTUM_DIR)/process_keycode/process_key_lock.c - OPT_DEFS += -DKEY_LOCK_ENABLE -endif - -ifeq ($(strip $(LEADER_ENABLE)), yes) - SRC += $(QUANTUM_DIR)/process_keycode/process_leader.c - OPT_DEFS += -DLEADER_ENABLE -endif - ifeq ($(strip $(AUTO_SHIFT_ENABLE)), yes) SRC += $(QUANTUM_DIR)/process_keycode/process_auto_shift.c OPT_DEFS += -DAUTO_SHIFT_ENABLE @@ -678,11 +600,6 @@ ifeq ($(strip $(JOYSTICK_ENABLE)), yes) endif endif -DIGITIZER_ENABLE ?= no -ifneq ($(strip $(DIGITIZER_ENABLE)), no) - SRC += $(QUANTUM_DIR)/digitizer.c -endif - USBPD_ENABLE ?= no VALID_USBPD_DRIVER_TYPES = custom vendor USBPD_DRIVER ?= vendor diff --git a/generic_features.mk b/generic_features.mk new file mode 100644 index 0000000000..c455c83dd5 --- /dev/null +++ b/generic_features.mk @@ -0,0 +1,48 @@ +# Copyright 2021 QMK +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see . + +SPACE_CADET_ENABLE ?= yes +GRAVE_ESC_ENABLE ?= yes + +GENERIC_FEATURES = \ + COMBO \ + COMMAND \ + DIGITIZER \ + DIP_SWITCH \ + DYNAMIC_KEYMAP \ + DYNAMIC_MACRO \ + ENCODER \ + GRAVE_ESC \ + KEY_LOCK \ + KEY_OVERRIDE \ + LEADER \ + PROGRAMMABLE_BUTTON \ + SPACE_CADET \ + TAP_DANCE \ + VELOCIKEY \ + WPM \ + +define HANDLE_GENERIC_FEATURE + # $$(info "Processing: $1_ENABLE $2.c") + SRC += $$(wildcard $$(QUANTUM_DIR)/process_keycode/process_$2.c) + SRC += $$(wildcard $$(QUANTUM_DIR)/$2.c) + OPT_DEFS += -D$1_ENABLE +endef + +$(foreach F,$(GENERIC_FEATURES),\ + $(if $(filter yes, $(strip $($(F)_ENABLE))),\ + $(eval $(call HANDLE_GENERIC_FEATURE,$(F),$(shell echo $(F) | tr '[:upper:]' '[:lower:]'))) \ + ) \ +) From ad2b017ee63ca3719ce1051b0878b7aba8fcbc92 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Mon, 18 Oct 2021 00:15:26 +0100 Subject: [PATCH 303/595] Remove legacy Makefile functionality (#14858) --- Makefile | 29 ----------------------------- 1 file changed, 29 deletions(-) diff --git a/Makefile b/Makefile index 220a551915..a1741dd961 100644 --- a/Makefile +++ b/Makefile @@ -54,8 +54,6 @@ BUILD_DIR := $(ROOT_DIR)/.build TEST_DIR := $(BUILD_DIR)/test ERROR_FILE := $(BUILD_DIR)/error_occurred -MAKEFILE_INCLUDED=yes - # Helper function to process the newt element of a space separated path # It works a bit like the traditional functional head tail # so the CURRENT_PATH_ELEMENT will become the new head @@ -93,31 +91,8 @@ distclean: clean rm -f *.bin *.hex *.uf2 echo 'done.' -#Compatibility with the old make variables, anything you specify directly on the command line -# always overrides the detected folders -ifdef keyboard - KEYBOARD := $(keyboard) -endif -ifdef keymap - KEYMAP := $(keymap) -endif - -# Uncomment these for debugging -# $(info Keyboard: $(KEYBOARD)) -# $(info Keymap: $(KEYMAP)) - -# Set the default goal depending on where we are running make from -# this handles the case where you run make without any arguments .DEFAULT_GOAL := all:all -ifneq ($(KEYMAP),) - .DEFAULT_GOAL := $(KEYBOARD):$(KEYMAP) -else ifneq ($(KEYBOARD),) - # Inside a keyboard folder, build all keymaps for all subprojects - # Note that this is different from the old behaviour, which would - # build only the default keymap of the default keyboard - .DEFAULT_GOAL := $(KEYBOARD):all -endif # Compare the start of the RULE variable with the first argument($1) @@ -241,10 +216,6 @@ define PARSE_RULE else ifeq ($$(call TRY_TO_MATCH_RULE_FROM_LIST,$$(shell util/list_keyboards.sh | sort -u)),true) KEYBOARD_RULE=$$(MATCHED_ITEM) $$(eval $$(call PARSE_KEYBOARD,$$(MATCHED_ITEM))) - # Otherwise use the KEYBOARD variable, which is determined either by - # the current directory you run make from, or passed in as an argument - else ifneq ($$(KEYBOARD),) - $$(eval $$(call PARSE_KEYBOARD,$$(KEYBOARD))) else $$(info make: *** No rule to make target '$1'. Stop.) $$(info |) From 587f7508fca50b48578e61c8fb1e1972b56381e1 Mon Sep 17 00:00:00 2001 From: Sergey Vlasov Date: Mon, 18 Oct 2021 03:09:33 +0300 Subject: [PATCH 304/595] preonic/rev3_drop: Fix old custom matrix code (#14857) The old custom matrix code for Preonic rev3 was relying on the `matrix_col_t` type, because the code actually reads the row pins and assembles the state for whole columns, and then transposes the matrix in the custom debouncing code. Restore that type (which is no longer defined by the core QMK code) to make the custom matrix code work properly (when `matrix_row_t` was used instead of `matrix_col_t`, the state of two electrical rows was lost, and those electrical rows corresponded to the bottom physical row, which did not work). --- keyboards/preonic/rev3_drop/matrix.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/keyboards/preonic/rev3_drop/matrix.c b/keyboards/preonic/rev3_drop/matrix.c index 392997e0a5..07171a39e9 100644 --- a/keyboards/preonic/rev3_drop/matrix.c +++ b/keyboards/preonic/rev3_drop/matrix.c @@ -24,13 +24,15 @@ #include "debug.h" #include "matrix.h" +typedef uint16_t matrix_col_t; + /* * col: { B11, B10, B2, B1, A7, B0 } * row: { A10, A9, A8, B15, C13, C14, C15, A2 } */ /* matrix state(1:on, 0:off) */ static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_COLS]; +static matrix_col_t matrix_debouncing[MATRIX_COLS]; static bool debouncing = false; static uint16_t debouncing_time = 0; @@ -66,7 +68,7 @@ void matrix_init(void) { palSetPadMode(GPIOA, 6, PAL_MODE_INPUT_PULLDOWN); memset(matrix, 0, MATRIX_ROWS * sizeof(matrix_row_t)); - memset(matrix_debouncing, 0, MATRIX_COLS * sizeof(matrix_row_t)); + memset(matrix_debouncing, 0, MATRIX_COLS * sizeof(matrix_col_t)); matrix_init_quantum(); } @@ -74,7 +76,7 @@ void matrix_init(void) { uint8_t matrix_scan(void) { // actual matrix for (int col = 0; col < MATRIX_COLS; col++) { - matrix_row_t data = 0; + matrix_col_t data = 0; // strobe col { B11, B10, B2, B1, A7, B0 } switch (col) { From 7e3ff206b8600265ea086040b397f1a600c4a7f3 Mon Sep 17 00:00:00 2001 From: bwisn <56162793+bwisn@users.noreply.github.com> Date: Mon, 18 Oct 2021 07:17:29 +0200 Subject: [PATCH 305/595] Add HT32 support to core (#14388) * tmk_core: temporary fix to allow HT32 based keyboards to work without patched ChibiOS-contrib (AnnePro2) * HT32: add spi support Add persistent led support with eeprom (#9) * adding HT32 support to chibios SPI master driver update spi driver, fix bad merging with master * HT32: fix formatting HT32: Fix formatting: tmk_core/protocol/chibios/usb_main.c Co-authored-by: Drashna Jaelre * HT32: Apply suggestions from fauxpark's code review Co-authored-by: Ryan * HT32: update spi driver * ht32: apply code review suggestions, remove old workaround Co-authored-by: tech2077 Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- platforms/chibios/drivers/spi_master.c | 25 ++++++++++++++++++++++++ tmk_core/common/chibios/chibios_config.h | 10 +++++++++- 2 files changed, 34 insertions(+), 1 deletion(-) diff --git a/platforms/chibios/drivers/spi_master.c b/platforms/chibios/drivers/spi_master.c index f98db6db97..c592369dde 100644 --- a/platforms/chibios/drivers/spi_master.c +++ b/platforms/chibios/drivers/spi_master.c @@ -110,6 +110,31 @@ bool spi_start(pin_t slavePin, bool lsbFirst, uint8_t mode, uint16_t divisor) { spiConfig.tar0 |= SPIx_CTARn_BR(8); break; } + +#elif defined(HT32) + spiConfig.cr0 = SPI_CR0_SELOEN; + spiConfig.cr1 = SPI_CR1_MODE | 8; // 8 bits and in master mode + + if (lsbFirst) { + spiConfig.cr1 |= SPI_CR1_FIRSTBIT; + } + + switch (mode) { + case 0: + spiConfig.cr1 |= SPI_CR1_FORMAT_MODE0; + break; + case 1: + spiConfig.cr1 |= SPI_CR1_FORMAT_MODE1; + break; + case 2: + spiConfig.cr1 |= SPI_CR1_FORMAT_MODE2; + break; + case 3: + spiConfig.cr1 |= SPI_CR1_FORMAT_MODE3; + break; + } + + spiConfig.cpr = (roundedDivisor - 1) >> 1; #else spiConfig.cr1 = 0; diff --git a/tmk_core/common/chibios/chibios_config.h b/tmk_core/common/chibios/chibios_config.h index c35f589557..f065948028 100644 --- a/tmk_core/common/chibios/chibios_config.h +++ b/tmk_core/common/chibios/chibios_config.h @@ -48,4 +48,12 @@ # define USE_I2CV1_CONTRIB // for some reason a bunch of ChibiOS-Contrib boards only have clock_speed # define USE_GPIOV1 # endif -#endif \ No newline at end of file +#endif + +#if defined(HT32) +# define CPU_CLOCK HT32_CK_SYS_FREQUENCY +# define PAL_MODE_ALTERNATE PAL_HT32_MODE_AF +# define PAL_OUTPUT_TYPE_OPENDRAIN (PAL_HT32_MODE_OD | PAL_HT32_MODE_DIR) +# define PAL_OUTPUT_TYPE_PUSHPULL PAL_HT32_MODE_DIR +# define PAL_OUTPUT_SPEED_HIGHEST 0 +#endif From e50867d52d9c255570630a23514842749b45e4c1 Mon Sep 17 00:00:00 2001 From: Stefan Kerkmann Date: Mon, 18 Oct 2021 07:23:20 +0200 Subject: [PATCH 306/595] [Core] Add support for RISC-V builds and GD32VF103 MCU (#12508) * Add support for RISC-V builds and GD32VF103 MCU * Add toolchain selection in chibios.mk based on the mcu selected in mcu_selection.mk * Reorder and added comments to chibios.mk to have a streamlined makefile * Add GD32VF103 mcu to possible targets for QMK. * Add STM32 compatibility for GD32VF103 MCU, this is hacky but more efficent then rewriting every driver. * Add GigaDevice DFU bootloader as flash target, please note that dfu-util of at least version 0.10 is needed. * Add analog driver compatibility * Add apa102 bitbang driver compatibility * Add ws2812 bitbang driver compatibility * Add eeprom in flash emulation compatibility * Allow faster re-builds with ccache * Add SiPeed Longan Nano to platform files * Add SiPeed Longan Nano Onekeys * Make quine compatible with other bootloaders * Support builds with picolibc * Add risc-v toolchain to arch and debian/ubuntu scripts --- bootloader.mk | 9 + common_features.mk | 2 +- data/schemas/keyboard.jsonschema | 4 +- docs/compatible_microcontrollers.md | 6 + docs/driver_installation_zadig.md | 1 + drivers/led/apa102.c | 2 +- .../handwired/onekey/keymaps/quine/rules.mk | 1 - keyboards/handwired/onekey/readme.md | 2 +- .../onekey/sipeed_longan_nano/chconf.h | 23 ++ .../onekey/sipeed_longan_nano/config.h | 37 +++ .../onekey/sipeed_longan_nano/halconf.h | 23 ++ .../onekey/sipeed_longan_nano/mcuconf.h | 29 ++ .../onekey/sipeed_longan_nano/readme.md | 5 + .../onekey/sipeed_longan_nano/rules.mk | 11 + lib/python/qmk/constants.py | 2 +- .../boards/SIPEED_LONGAN_NANO/board/board.mk | 9 + .../SIPEED_LONGAN_NANO/configs/chconf.h | 23 ++ .../SIPEED_LONGAN_NANO/configs/mcuconf.h | 302 +++++++++++++++++ platforms/chibios/drivers/analog.c | 10 +- platforms/chibios/drivers/ws2812.c | 2 +- platforms/chibios/flash.mk | 2 + quantum/mcu_selection.mk | 31 ++ tmk_core/chibios.mk | 310 ++++++++++++------ tmk_core/common/chibios/bootloader.c | 22 ++ tmk_core/common/chibios/chibios_config.h | 19 ++ tmk_core/common/chibios/eeprom_stm32_defs.h | 6 +- tmk_core/common/chibios/flash_stm32.c | 5 + tmk_core/common/chibios/gd32v_compatibility.h | 120 +++++++ tmk_core/common/chibios/syscall-fallbacks.c | 6 + util/install/arch.sh | 3 +- util/install/debian.sh | 3 +- 31 files changed, 904 insertions(+), 126 deletions(-) delete mode 100644 keyboards/handwired/onekey/keymaps/quine/rules.mk create mode 100644 keyboards/handwired/onekey/sipeed_longan_nano/chconf.h create mode 100644 keyboards/handwired/onekey/sipeed_longan_nano/config.h create mode 100644 keyboards/handwired/onekey/sipeed_longan_nano/halconf.h create mode 100644 keyboards/handwired/onekey/sipeed_longan_nano/mcuconf.h create mode 100644 keyboards/handwired/onekey/sipeed_longan_nano/readme.md create mode 100644 keyboards/handwired/onekey/sipeed_longan_nano/rules.mk create mode 100644 platforms/chibios/boards/SIPEED_LONGAN_NANO/board/board.mk create mode 100644 platforms/chibios/boards/SIPEED_LONGAN_NANO/configs/chconf.h create mode 100644 platforms/chibios/boards/SIPEED_LONGAN_NANO/configs/mcuconf.h create mode 100644 tmk_core/common/chibios/gd32v_compatibility.h diff --git a/bootloader.mk b/bootloader.mk index 5ba118fb44..ccb92392d9 100644 --- a/bootloader.mk +++ b/bootloader.mk @@ -34,6 +34,8 @@ # stm32duino STM32Duino (STM32F103x8) # stm32-dfu STM32 USB DFU in ROM # apm32-dfu APM32 USB DFU in ROM +# RISC-V: +# gd32v-dfu GD32V USB DFU in ROM # # BOOTLOADER_SIZE can still be defined manually, but it's recommended # you add any possible configuration to this list @@ -125,6 +127,13 @@ ifeq ($(strip $(BOOTLOADER)), apm32-dfu) DFU_ARGS ?= -d 314B:0106 -a 0 -s 0x08000000:leave DFU_SUFFIX_ARGS ?= -v 314B -p 0106 endif +ifeq ($(strip $(BOOTLOADER)), gd32v-dfu) + OPT_DEFS += -DBOOTLOADER_GD32V_DFU + + # Options to pass to dfu-util when flashing + DFU_ARGS ?= -d 28E9:0189 -a 0 -s 0x08000000:leave + DFU_SUFFIX_ARGS ?= -v 28E9 -p 0189 +endif ifeq ($(strip $(BOOTLOADER)), kiibohd) OPT_DEFS += -DBOOTLOADER_KIIBOHD ifeq ($(strip $(MCU_ORIG)), MK20DX128) diff --git a/common_features.mk b/common_features.mk index aff91641e4..7dd63be5be 100644 --- a/common_features.mk +++ b/common_features.mk @@ -142,7 +142,7 @@ else ifeq ($(PLATFORM),AVR) # Automatically provided by avr-libc, nothing required else ifeq ($(PLATFORM),CHIBIOS) - ifneq ($(filter STM32F3xx_% STM32F1xx_% %_STM32F401xC %_STM32F401xE %_STM32F405xG %_STM32F411xE %_STM32F072xB %_STM32F042x6, $(MCU_SERIES)_$(MCU_LDSCRIPT)),) + ifneq ($(filter STM32F3xx_% STM32F1xx_% %_STM32F401xC %_STM32F401xE %_STM32F405xG %_STM32F411xE %_STM32F072xB %_STM32F042x6 %_GD32VF103xB %_GD32VF103x8, $(MCU_SERIES)_$(MCU_LDSCRIPT)),) OPT_DEFS += -DEEPROM_DRIVER COMMON_VPATH += $(DRIVER_PATH)/eeprom SRC += eeprom_driver.c diff --git a/data/schemas/keyboard.jsonschema b/data/schemas/keyboard.jsonschema index b6b5e411fe..65d44c94d2 100644 --- a/data/schemas/keyboard.jsonschema +++ b/data/schemas/keyboard.jsonschema @@ -13,7 +13,7 @@ }, "processor": { "type": "string", - "enum": ["cortex-m0", "cortex-m0plus", "cortex-m3", "cortex-m4", "MKL26Z64", "MK20DX128", "MK20DX256", "MK66FX1M0", "STM32F042", "STM32F072", "STM32F103", "STM32F303", "STM32F401", "STM32F405", "STM32F407", "STM32F411", "STM32F446", "STM32G431", "STM32G474", "STM32L412", "STM32L422", "STM32L433", "STM32L443", "atmega16u2", "atmega32u2", "atmega16u4", "atmega32u4", "at90usb162", "at90usb646", "at90usb647", "at90usb1286", "at90usb1287", "atmega32a", "atmega328p", "atmega328", "attiny85", "unknown"] + "enum": ["cortex-m0", "cortex-m0plus", "cortex-m3", "cortex-m4", "MKL26Z64", "MK20DX128", "MK20DX256", "MK66FX1M0", "STM32F042", "STM32F072", "STM32F103", "STM32F303", "STM32F401", "STM32F405", "STM32F407", "STM32F411", "STM32F446", "STM32G431", "STM32G474", "STM32L412", "STM32L422", "STM32L433", "STM32L443", "GD32VF103", "atmega16u2", "atmega32u2", "atmega16u4", "atmega32u4", "at90usb162", "at90usb646", "at90usb647", "at90usb1286", "at90usb1287", "atmega32a", "atmega328p", "atmega328", "attiny85", "unknown"] }, "audio": { "type": "object", @@ -56,7 +56,7 @@ }, "bootloader": { "type": "string", - "enum": ["atmel-dfu", "bootloadhid", "bootloadHID", "caterina", "halfkay", "kiibohd", "lufa-dfu", "lufa-ms", "micronucleus", "qmk-dfu", "qmk-hid", "stm32-dfu", "stm32duino", "unknown", "usbasploader", "USBasp", "tinyuf2"], + "enum": ["atmel-dfu", "bootloadhid", "bootloadHID", "caterina", "halfkay", "kiibohd", "lufa-dfu", "lufa-ms", "micronucleus", "qmk-dfu", "qmk-hid", "stm32-dfu", "stm32duino", "gd32v-dfu", "unknown", "usbasploader", "USBasp", "tinyuf2"], }, "bootloader_instructions": { "type": "string", diff --git a/docs/compatible_microcontrollers.md b/docs/compatible_microcontrollers.md index f4aab5f5bd..39e9061c20 100644 --- a/docs/compatible_microcontrollers.md +++ b/docs/compatible_microcontrollers.md @@ -48,3 +48,9 @@ You can also use any ARM chip with USB that [ChibiOS](https://www.chibios.org) s ## Atmel ATSAM There is limited support for one of Atmel's ATSAM microcontrollers, that being the [ATSAMD51J18A](https://www.microchip.com/wwwproducts/en/ATSAMD51J18A) used by the [Massdrop keyboards](https://github.com/qmk/qmk_firmware/tree/master/keyboards/massdrop). + +## RISC-V + +### GigaDevice + +[ChibiOS-Contrib](https://github.com/ChibiOS/ChibiOS-Contrib) has support for the GigaDevice [GD32VF103 series](https://www.gigadevice.com/products/microcontrollers/gd32/risc-v/mainstream-line/gd32vf103-series/) microcontrollers and provides configurations for the [SiPeed Longan Nano](https://longan.sipeed.com/en/) development board that uses this microcontroller. It is largely pin and feature compatible with STM32F103 and STM32F303 microcontrollers. \ No newline at end of file diff --git a/docs/driver_installation_zadig.md b/docs/driver_installation_zadig.md index 9155e56e37..003629ba9a 100644 --- a/docs/driver_installation_zadig.md +++ b/docs/driver_installation_zadig.md @@ -93,6 +93,7 @@ The device name here is the name that appears in Zadig, and may not be what the |`usbasploader`|USBasp |`16C0:05DC` |libusbK| |`apm32-dfu` |APM32 DFU ISP Mode |`314B:0106` |WinUSB | |`stm32-dfu` |STM32 BOOTLOADER |`0483:DF11` |WinUSB | +|`gd32v-dfu` |GD32V BOOTLOADER |`28E9:0189` |WinUSB | |`kiibohd` |Kiibohd DFU Bootloader |`1C11:B007` |WinUSB | |`stm32duino` |Maple 003 |`1EAF:0003` |WinUSB | |`qmk-hid` |(keyboard name) Bootloader |`03EB:2067` |HidUsb | diff --git a/drivers/led/apa102.c b/drivers/led/apa102.c index 19e0bfc189..00e7eb4505 100644 --- a/drivers/led/apa102.c +++ b/drivers/led/apa102.c @@ -24,7 +24,7 @@ # elif defined(PROTOCOL_CHIBIOS) # include "hal.h" -# if defined(STM32F0XX) || defined(STM32F1XX) || defined(STM32F3XX) || defined(STM32F4XX) || defined(STM32L0XX) +# if defined(STM32F0XX) || defined(STM32F1XX) || defined(STM32F3XX) || defined(STM32F4XX) || defined(STM32L0XX) || defined(GD32VF103) # define APA102_NOPS (100 / (1000000000L / (CPU_CLOCK / 4))) // This calculates how many loops of 4 nops to run to delay 100 ns # else # error("APA102_NOPS configuration required") diff --git a/keyboards/handwired/onekey/keymaps/quine/rules.mk b/keyboards/handwired/onekey/keymaps/quine/rules.mk deleted file mode 100644 index 4c2b0289a2..0000000000 --- a/keyboards/handwired/onekey/keymaps/quine/rules.mk +++ /dev/null @@ -1 +0,0 @@ -BOOTLOADER = atmel-dfu diff --git a/keyboards/handwired/onekey/readme.md b/keyboards/handwired/onekey/readme.md index b630b11748..2973b7d873 100644 --- a/keyboards/handwired/onekey/readme.md +++ b/keyboards/handwired/onekey/readme.md @@ -3,7 +3,7 @@ Custom handwired one key keyboard. **See each individual board for pin information.** * Keyboard Maintainer: QMK Community -* Hardware Supported: bluepill, Elite-C, Pro Micro, Proton C, Teensy 2.0, Teensy++ 2.0, Teensy LC, Teensy 3.2 +* Hardware Supported: Blackpill F401/F411, Bluepill, Elite-C, Pro Micro, Proton C, Sipeed Longan Nano, STM32F0 Disco, Teensy 2.0, Teensy++ 2.0, Teensy LC, Teensy 3.2 * Hardware Availability: *n/a* Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/handwired/onekey/sipeed_longan_nano/chconf.h b/keyboards/handwired/onekey/sipeed_longan_nano/chconf.h new file mode 100644 index 0000000000..b1eb18de78 --- /dev/null +++ b/keyboards/handwired/onekey/sipeed_longan_nano/chconf.h @@ -0,0 +1,23 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#define CH_CFG_ST_RESOLUTION 16 + +#define CH_CFG_ST_FREQUENCY 10000 + +#include_next diff --git a/keyboards/handwired/onekey/sipeed_longan_nano/config.h b/keyboards/handwired/onekey/sipeed_longan_nano/config.h new file mode 100644 index 0000000000..1825b936d8 --- /dev/null +++ b/keyboards/handwired/onekey/sipeed_longan_nano/config.h @@ -0,0 +1,37 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "config_common.h" + +#define MATRIX_COL_PINS \ + { B0 } +#define MATRIX_ROW_PINS \ + { A7 } +#define UNUSED_PINS + +#define BACKLIGHT_PIN A1 /* Green LED. */ +#define BACKLIGHT_PWM_DRIVER PWMD5 /* GD32 numbering scheme starts from 0, TIMER4 on GD32 boards is TIMER5 on STM32 boards. */ +#define BACKLIGHT_PWM_CHANNEL 2 /* GD32 numbering scheme starts from 0, Channel 1 on GD32 boards is Channel 2 on STM32 boards. */ + +#define RGB_DI_PIN A2 +#define RGB_CI_PIN B13 + +#define ADC_PIN A0 + +#define I2C1_CLOCK_SPEED 1000000 /* GD32VF103 supports fast mode plus. */ +#define I2C1_DUTY_CYCLE FAST_DUTY_CYCLE_2 diff --git a/keyboards/handwired/onekey/sipeed_longan_nano/halconf.h b/keyboards/handwired/onekey/sipeed_longan_nano/halconf.h new file mode 100644 index 0000000000..2579c58747 --- /dev/null +++ b/keyboards/handwired/onekey/sipeed_longan_nano/halconf.h @@ -0,0 +1,23 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#define HAL_USE_PWM TRUE +#define HAL_USE_ADC TRUE +#define HAL_USE_I2C TRUE + +#include_next diff --git a/keyboards/handwired/onekey/sipeed_longan_nano/mcuconf.h b/keyboards/handwired/onekey/sipeed_longan_nano/mcuconf.h new file mode 100644 index 0000000000..eba0dd9eeb --- /dev/null +++ b/keyboards/handwired/onekey/sipeed_longan_nano/mcuconf.h @@ -0,0 +1,29 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2021 Stefan Kerkmann + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#pragma once + +#include_next + +#undef GD32_ADC_USE_ADC0 +#define GD32_ADC_USE_ADC0 TRUE + +#undef GD32_I2C_USE_I2C0 +#define GD32_I2C_USE_I2C0 TRUE + +#undef GD32_PWM_USE_TIM4 +#define GD32_PWM_USE_TIM4 TRUE diff --git a/keyboards/handwired/onekey/sipeed_longan_nano/readme.md b/keyboards/handwired/onekey/sipeed_longan_nano/readme.md new file mode 100644 index 0000000000..0a3a291576 --- /dev/null +++ b/keyboards/handwired/onekey/sipeed_longan_nano/readme.md @@ -0,0 +1,5 @@ +# Sipeed Longan Nano onekey + +Supported Hardware: *GD32VF103CB Sipeed Longan Nano*. + +To trigger keypress, short together pins *B0* and *A7*. \ No newline at end of file diff --git a/keyboards/handwired/onekey/sipeed_longan_nano/rules.mk b/keyboards/handwired/onekey/sipeed_longan_nano/rules.mk new file mode 100644 index 0000000000..aef4fee6b2 --- /dev/null +++ b/keyboards/handwired/onekey/sipeed_longan_nano/rules.mk @@ -0,0 +1,11 @@ +# MCU name +MCU = GD32VF103 +BOARD = SIPEED_LONGAN_NANO + +# Bootloader selection +BOOTLOADER = gd32v-dfu + +# Build Options +# change yes to no to disable +# +KEYBOARD_SHARED_EP = yes diff --git a/lib/python/qmk/constants.py b/lib/python/qmk/constants.py index bfcd4064ac..73f596ba2c 100644 --- a/lib/python/qmk/constants.py +++ b/lib/python/qmk/constants.py @@ -13,7 +13,7 @@ QMK_FIRMWARE_UPSTREAM = 'qmk/qmk_firmware' MAX_KEYBOARD_SUBFOLDERS = 5 # Supported processor types -CHIBIOS_PROCESSORS = 'cortex-m0', 'cortex-m0plus', 'cortex-m3', 'cortex-m4', 'MKL26Z64', 'MK20DX128', 'MK20DX256', 'MK66FX1M0', 'STM32F042', 'STM32F072', 'STM32F103', 'STM32F303', 'STM32F401', 'STM32F407', 'STM32F411', 'STM32F446', 'STM32G431', 'STM32G474', 'STM32L412', 'STM32L422', 'STM32L433', 'STM32L443' +CHIBIOS_PROCESSORS = 'cortex-m0', 'cortex-m0plus', 'cortex-m3', 'cortex-m4', 'MKL26Z64', 'MK20DX128', 'MK20DX256', 'MK66FX1M0', 'STM32F042', 'STM32F072', 'STM32F103', 'STM32F303', 'STM32F401', 'STM32F407', 'STM32F411', 'STM32F446', 'STM32G431', 'STM32G474', 'STM32L412', 'STM32L422', 'STM32L433', 'STM32L443', 'GD32VF103' LUFA_PROCESSORS = 'at90usb162', 'atmega16u2', 'atmega32u2', 'atmega16u4', 'atmega32u4', 'at90usb646', 'at90usb647', 'at90usb1286', 'at90usb1287', None VUSB_PROCESSORS = 'atmega32a', 'atmega328p', 'atmega328', 'attiny85' diff --git a/platforms/chibios/boards/SIPEED_LONGAN_NANO/board/board.mk b/platforms/chibios/boards/SIPEED_LONGAN_NANO/board/board.mk new file mode 100644 index 0000000000..960fc26786 --- /dev/null +++ b/platforms/chibios/boards/SIPEED_LONGAN_NANO/board/board.mk @@ -0,0 +1,9 @@ +# List of all the board related files. +BOARDSRC = ${CHIBIOS_CONTRIB}/os/hal/boards/SIPEED_LONGAN_NANO/board.c + +# Required include directories +BOARDINC = ${CHIBIOS_CONTRIB}/os/hal/boards/SIPEED_LONGAN_NANO + +# Shared variables +ALLCSRC += $(BOARDSRC) +ALLINC += $(BOARDINC) diff --git a/platforms/chibios/boards/SIPEED_LONGAN_NANO/configs/chconf.h b/platforms/chibios/boards/SIPEED_LONGAN_NANO/configs/chconf.h new file mode 100644 index 0000000000..6e5adb0fe1 --- /dev/null +++ b/platforms/chibios/boards/SIPEED_LONGAN_NANO/configs/chconf.h @@ -0,0 +1,23 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +/* To compile the ChibiOS syscall stubs with picolibc + * the _reent struct has to be defined. */ +#if !defined(_FROM_ASM_) && defined(USE_PICOLIBC) +struct _reent; +#endif + +#include_next \ No newline at end of file diff --git a/platforms/chibios/boards/SIPEED_LONGAN_NANO/configs/mcuconf.h b/platforms/chibios/boards/SIPEED_LONGAN_NANO/configs/mcuconf.h new file mode 100644 index 0000000000..ab086567e5 --- /dev/null +++ b/platforms/chibios/boards/SIPEED_LONGAN_NANO/configs/mcuconf.h @@ -0,0 +1,302 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2021 Stefan Kerkmann + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#pragma once + +#define GD32VF103_MCUCONF +#define GD32VF103CB + +/* + * GD32VF103 drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 0...15 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +/* + * HAL driver system settings. +*/ + +#if defined(OVERCLOCK_120MHZ) +/* (8MHz / 2) * 30 = 120MHz Sysclock */ +#define GD32_ALLOW_120MHZ_SYSCLK +#define GD32_PLLMF_VALUE 30 +#define GD32_USBFSPSC GD32_USBFSPSC_DIV2P5 +#else +/* (8MHz / 2) * 24 = 96MHz Sysclock */ +#define GD32_PLLMF_VALUE 24 +#define GD32_USBFSPSC GD32_USBFSPSC_DIV2 +#endif + +#define GD32_NO_INIT FALSE +#define GD32_IRC8M_ENABLED TRUE +#define GD32_IRC40K_ENABLED FALSE +#define GD32_HXTAL_ENABLED TRUE +#define GD32_LXTAL_ENABLED FALSE +#define GD32_SCS GD32_SCS_PLL +#define GD32_PLLSEL GD32_PLLSEL_PREDV0 +#define GD32_PREDV0SEL GD32_PREDV0SEL_HXTAL +#define GD32_PREDV0_VALUE 2 +#define GD32_PREDV1_VALUE 2 +#define GD32_PLL1MF_VALUE 14 +#define GD32_PLL2MF_VALUE 13 +#define GD32_AHBPSC GD32_AHBPSC_DIV1 +#define GD32_APB1PSC GD32_APB1PSC_DIV2 +#define GD32_APB2PSC GD32_APB2PSC_DIV1 +#define GD32_ADCPSC GD32_ADCPSC_DIV16 +#define GD32_USB_CLOCK_REQUIRED TRUE +#define GD32_I2S_CLOCK_REQUIRED FALSE +#define GD32_CKOUT0SEL GD32_CKOUT0SEL_NOCLOCK +#define GD32_RTCSRC GD32_RTCSRC_NOCLOCK +#define GD32_PVD_ENABLE FALSE +#define GD32_LVDT GD32_LVDT_LEV0 + +/* + * ECLIC system settings. + */ +#define ECLIC_TRIGGER_DEFAULT ECLIC_POSTIVE_EDGE_TRIGGER +#define ECLIC_DMA_TRIGGER ECLIC_TRIGGER_DEFAULT + +/* + * IRQ system settings. + */ +#define GD32_IRQ_EXTI0_PRIORITY 6 +#define GD32_IRQ_EXTI1_PRIORITY 6 +#define GD32_IRQ_EXTI2_PRIORITY 6 +#define GD32_IRQ_EXTI3_PRIORITY 6 +#define GD32_IRQ_EXTI4_PRIORITY 6 +#define GD32_IRQ_EXTI5_9_PRIORITY 6 +#define GD32_IRQ_EXTI10_15_PRIORITY 6 +#define GD32_IRQ_EXTI0_TRIGGER ECLIC_TRIGGER_DEFAULT +#define GD32_IRQ_EXTI1_TRIGGER ECLIC_TRIGGER_DEFAULT +#define GD32_IRQ_EXTI2_TRIGGER ECLIC_TRIGGER_DEFAULT +#define GD32_IRQ_EXTI3_TRIGGER ECLIC_TRIGGER_DEFAULT +#define GD32_IRQ_EXTI4_TRIGGER ECLIC_TRIGGER_DEFAULT +#define GD32_IRQ_EXTI5_9_TRIGGER ECLIC_TRIGGER_DEFAULT +#define GD32_IRQ_EXTI10_15_TRIGGER ECLIC_TRIGGER_DEFAULT + +/* + * ADC driver system settings. + */ +#define GD32_ADC_USE_ADC0 FALSE +#define GD32_ADC_ADC0_DMA_PRIORITY 2 +#define GD32_ADC_ADC0_IRQ_PRIORITY 6 + +/* + * CAN driver system settings. + */ +#define GD32_CAN_USE_CAN0 FALSE +#define GD32_CAN_CAN0_IRQ_PRIORITY 11 +#define GD32_CAN_USE_CAN1 FALSE +#define GD32_CAN_CAN1_IRQ_PRIORITY 11 +#define GD32_CAN_CAN0_IRQ_TRIGGER ECLIC_TRIGGER_DEFAULT +#define GD32_CAN_CAN1_IRQ_TRIGGER ECLIC_TRIGGER_DEFAULT + +/* + * CRC driver system settings. + */ +#define GD32_CRC_USE_CRC0 FALSE +#define GD32_CRC_CRC0_DMA_IRQ_PRIORITY 14 +#define GD32_CRC_CRC0_DMA_PRIORITY 2 +#define GD32_CRC_CRC0_DMA_STREAM GD32_DMA_STREAM_ID(0, 0) +#define CRC_USE_DMA FALSE +#define CRCSW_USE_CRC1 FALSE +#define CRCSW_CRC32_TABLE FALSE +#define CRCSW_CRC16_TABLE FALSE +#define CRCSW_PROGRAMMABLE FALSE + +/* + * DAC driver system settings. + */ +#define GD32_DAC_USE_DAC_CH1 FALSE +#define GD32_DAC_USE_DAC_CH2 FALSE + +/* + * GPT driver system settings. + */ +#define GD32_GPT_USE_TIM0 FALSE +#define GD32_GPT_USE_TIM1 FALSE +#define GD32_GPT_USE_TIM2 FALSE +#define GD32_GPT_USE_TIM3 FALSE +#define GD32_GPT_USE_TIM4 FALSE +#define GD32_GPT_TIM0_IRQ_PRIORITY 7 +#define GD32_GPT_TIM1_IRQ_PRIORITY 7 +#define GD32_GPT_TIM2_IRQ_PRIORITY 7 +#define GD32_GPT_TIM3_IRQ_PRIORITY 7 +#define GD32_GPT_TIM4_IRQ_PRIORITY 7 +#define GD32_GPT_TIM0_IRQ_TRIGGER ECLIC_TRIGGER_DEFAULT +#define GD32_GPT_TIM1_IRQ_TRIGGER ECLIC_TRIGGER_DEFAULT +#define GD32_GPT_TIM2_IRQ_TRIGGER ECLIC_TRIGGER_DEFAULT +#define GD32_GPT_TIM3_IRQ_TRIGGER ECLIC_TRIGGER_DEFAULT +#define GD32_GPT_TIM4_IRQ_TRIGGER ECLIC_TRIGGER_DEFAULT +#define GD32_GPT_TIM5_IRQ_TRIGGER ECLIC_TRIGGER_DEFAULT +#define GD32_GPT_TIM6_IRQ_TRIGGER ECLIC_TRIGGER_DEFAULT + +/* + * I2S driver system settings. + */ +#define GD32_I2S_USE_SPI1 FALSE +#define GD32_I2S_USE_SPI2 FALSE +#define GD32_I2S_SPI1_IRQ_PRIORITY 10 +#define GD32_I2S_SPI2_IRQ_PRIORITY 10 +#define GD32_I2S_SPI1_DMA_PRIORITY 1 +#define GD32_I2S_SPI2_DMA_PRIORITY 1 +#define GD32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") + +/* + * I2C driver system settings. + */ +#define GD32_I2C_USE_I2C0 FALSE +#define GD32_I2C_USE_I2C1 FALSE +#define GD32_I2C_BUSY_TIMEOUT 50 +#define GD32_I2C_I2C0_IRQ_PRIORITY 10 +#define GD32_I2C_I2C1_IRQ_PRIORITY 5 +#define GD32_I2C_I2C0_IRQ_TRIGGER ECLIC_TRIGGER_DEFAULT +#define GD32_I2C_I2C1_IRQ_TRIGGER ECLIC_TRIGGER_DEFAULT +#define GD32_I2C_I2C0_DMA_PRIORITY 2 +#define GD32_I2C_I2C1_DMA_PRIORITY 2 +#define GD32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define GD32_ICU_USE_TIM0 FALSE +#define GD32_ICU_USE_TIM1 FALSE +#define GD32_ICU_USE_TIM2 FALSE +#define GD32_ICU_USE_TIM3 FALSE +#define GD32_ICU_USE_TIM4 FALSE +#define GD32_ICU_TIM0_IRQ_PRIORITY 7 +#define GD32_ICU_TIM1_IRQ_PRIORITY 7 +#define GD32_ICU_TIM2_IRQ_PRIORITY 7 +#define GD32_ICU_TIM3_IRQ_PRIORITY 7 +#define GD32_ICU_TIM4_IRQ_PRIORITY 7 +#define GD32_ICU_TIM0_IRQ_TRIGGER ECLIC_TRIGGER_DEFAULT +#define GD32_ICU_TIM1_IRQ_TRIGGER ECLIC_TRIGGER_DEFAULT +#define GD32_ICU_TIM2_IRQ_TRIGGER ECLIC_TRIGGER_DEFAULT +#define GD32_ICU_TIM3_IRQ_TRIGGER ECLIC_TRIGGER_DEFAULT +#define GD32_ICU_TIM4_IRQ_TRIGGER ECLIC_TRIGGER_DEFAULT + +/* + * PWM driver system settings. + */ +#define GD32_PWM_USE_ADVANCED FALSE +#define GD32_PWM_USE_TIM0 FALSE +#define GD32_PWM_USE_TIM1 FALSE +#define GD32_PWM_USE_TIM2 FALSE +#define GD32_PWM_USE_TIM3 FALSE +#define GD32_PWM_USE_TIM4 FALSE +#define GD32_PWM_TIM0_IRQ_PRIORITY 10 +#define GD32_PWM_TIM1_IRQ_PRIORITY 10 +#define GD32_PWM_TIM2_IRQ_PRIORITY 10 +#define GD32_PWM_TIM3_IRQ_PRIORITY 10 +#define GD32_PWM_TIM4_IRQ_PRIORITY 10 +#define GD32_PWM_TIM0_IRQ_TRIGGER ECLIC_TRIGGER_DEFAULT +#define GD32_PWM_TIM1_IRQ_TRIGGER ECLIC_TRIGGER_DEFAULT +#define GD32_PWM_TIM2_IRQ_TRIGGER ECLIC_TRIGGER_DEFAULT +#define GD32_PWM_TIM3_IRQ_TRIGGER ECLIC_TRIGGER_DEFAULT +#define GD32_PWM_TIM4_IRQ_TRIGGER ECLIC_TRIGGER_DEFAULT + +/* + * RTC driver system settings. + */ +#define GD32_RTC_IRQ_PRIORITY 15 +#define GD32_RTC_IRQ_TRIGGER ECLIC_TRIGGER_DEFAULT + +/* + * SERIAL driver system settings. + */ +#define GD32_SERIAL_USE_USART0 FALSE +#define GD32_SERIAL_USE_USART1 FALSE +#define GD32_SERIAL_USE_USART2 FALSE +#define GD32_SERIAL_USE_UART3 FALSE +#define GD32_SERIAL_USE_UART4 FALSE +#define GD32_SERIAL_USART0_PRIORITY 10 +#define GD32_SERIAL_USART1_PRIORITY 10 +#define GD32_SERIAL_USART2_PRIORITY 10 +#define GD32_SERIAL_UART3_PRIORITY 10 +#define GD32_SERIAL_UART4_PRIORITY 10 +#define GD32_SERIAL_USART0_TRIGGER ECLIC_TRIGGER_DEFAULT +#define GD32_SERIAL_USART1_TRIGGER ECLIC_TRIGGER_DEFAULT +#define GD32_SERIAL_USART2_TRIGGER ECLIC_TRIGGER_DEFAULT +#define GD32_SERIAL_UART3_TRIGGER ECLIC_TRIGGER_DEFAULT +#define GD32_SERIAL_UART4_TRIGGER ECLIC_TRIGGER_DEFAULT + +/* + * SPI driver system settings. + */ +#define GD32_SPI_USE_SPI0 FALSE +#define GD32_SPI_USE_SPI1 FALSE +#define GD32_SPI_USE_SPI2 FALSE +#define GD32_SPI_SPI0_DMA_PRIORITY 1 +#define GD32_SPI_SPI1_DMA_PRIORITY 1 +#define GD32_SPI_SPI2_DMA_PRIORITY 1 +#define GD32_SPI_SPI0_IRQ_PRIORITY 10 +#define GD32_SPI_SPI1_IRQ_PRIORITY 10 +#define GD32_SPI_SPI2_IRQ_PRIORITY 10 +#define GD32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define GD32_ST_IRQ_PRIORITY 10 +#define GD32_ST_IRQ_TRIGGER ECLIC_TRIGGER_DEFAULT +#define GD32_ST_USE_TIMER 1 + +/* + * UART driver system settings. + */ +#define GD32_UART_USE_USART0 FALSE +#define GD32_UART_USE_USART1 FALSE +#define GD32_UART_USE_USART2 FALSE +#define GD32_UART_USE_UART3 FALSE +#define GD32_UART_USE_UART4 FALSE +#define GD32_UART_USART0_IRQ_PRIORITY 10 +#define GD32_UART_USART1_IRQ_PRIORITY 10 +#define GD32_UART_USART2_IRQ_PRIORITY 10 +#define GD32_UART_UART3_IRQ_PRIORITY 10 +#define GD32_UART_UART4_IRQ_PRIORITY 10 +#define GD32_UART_USART0_IRQ_TRIGGER ECLIC_TRIGGER_DEFAULT +#define GD32_UART_USART1_IRQ_TRIGGER ECLIC_TRIGGER_DEFAULT +#define GD32_UART_USART2_IRQ_TRIGGER ECLIC_TRIGGER_DEFAULT +#define GD32_UART_UART3_IRQ_TRIGGER ECLIC_TRIGGER_DEFAULT +#define GD32_UART_UART4_IRQ_TRIGGER ECLIC_TRIGGER_DEFAULT +#define GD32_UART_USART0_DMA_PRIORITY 3 +#define GD32_UART_USART1_DMA_PRIORITY 3 +#define GD32_UART_USART2_DMA_PRIORITY 3 +#define GD32_UART_UART3_DMA_PRIORITY 3 +#define GD32_UART_UART4_DMA_PRIORITY 3 +#define GD32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define GD32_USB_USE_USBFS TRUE +#define GD32_USB_USBFS_IRQ_PRIORITY 10 +#define GD32_USB_USBFS_IRQ_TRIGGER ECLIC_TRIGGER_DEFAULT +#define GD32_USB_USBFS_RX_FIFO_SIZE 256 + +/* + * WDG driver system settings. + */ +#define GD32_WDG_USE_FWDGT FALSE diff --git a/platforms/chibios/drivers/analog.c b/platforms/chibios/drivers/analog.c index 8c476fcac2..eb437665f1 100644 --- a/platforms/chibios/drivers/analog.c +++ b/platforms/chibios/drivers/analog.c @@ -38,7 +38,7 @@ // Otherwise assume V3 #if defined(STM32F0XX) || defined(STM32L0XX) # define USE_ADCV1 -#elif defined(STM32F1XX) || defined(STM32F2XX) || defined(STM32F4XX) +#elif defined(STM32F1XX) || defined(STM32F2XX) || defined(STM32F4XX) || defined(GD32VF103) # define USE_ADCV2 #endif @@ -75,7 +75,7 @@ /* User configurable ADC options */ #ifndef ADC_COUNT -# if defined(STM32F0XX) || defined(STM32F1XX) || defined(STM32F4XX) +# if defined(STM32F0XX) || defined(STM32F1XX) || defined(STM32F4XX) || defined(GD32VF103) # define ADC_COUNT 1 # elif defined(STM32F3XX) # define ADC_COUNT 4 @@ -122,8 +122,8 @@ static ADCConversionGroup adcConversionGroup = { .cfgr1 = ADC_CFGR1_CONT | ADC_RESOLUTION, .smpr = ADC_SAMPLING_RATE, #elif defined(USE_ADCV2) -# if !defined(STM32F1XX) - .cr2 = ADC_CR2_SWSTART, // F103 seem very unhappy with, F401 seems very unhappy without... +# if !defined(STM32F1XX) && !defined(GD32VF103) + .cr2 = ADC_CR2_SWSTART, // F103 seem very unhappy with, F401 seems very unhappy without... # endif .smpr2 = ADC_SMPR2_SMP_AN0(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN1(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN2(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN3(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN4(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN5(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN6(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN7(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN8(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN9(ADC_SAMPLING_RATE), .smpr1 = ADC_SMPR1_SMP_AN10(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN11(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN12(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN13(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN14(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN15(ADC_SAMPLING_RATE), @@ -220,7 +220,7 @@ __attribute__((weak)) adc_mux pinToMux(pin_t pin) { case F9: return TO_MUX( ADC_CHANNEL_IN7, 2 ); case F10: return TO_MUX( ADC_CHANNEL_IN8, 2 ); # endif -#elif defined(STM32F1XX) +#elif defined(STM32F1XX) || defined(GD32VF103) case A0: return TO_MUX( ADC_CHANNEL_IN0, 0 ); case A1: return TO_MUX( ADC_CHANNEL_IN1, 0 ); case A2: return TO_MUX( ADC_CHANNEL_IN2, 0 ); diff --git a/platforms/chibios/drivers/ws2812.c b/platforms/chibios/drivers/ws2812.c index ffcdcff242..b46c46ae57 100644 --- a/platforms/chibios/drivers/ws2812.c +++ b/platforms/chibios/drivers/ws2812.c @@ -6,7 +6,7 @@ /* Adapted from https://github.com/bigjosh/SimpleNeoPixelDemo/ */ #ifndef NOP_FUDGE -# if defined(STM32F0XX) || defined(STM32F1XX) || defined(STM32F3XX) || defined(STM32F4XX) || defined(STM32L0XX) +# if defined(STM32F0XX) || defined(STM32F1XX) || defined(GD32VF103) || defined(STM32F3XX) || defined(STM32F4XX) || defined(STM32L0XX) # define NOP_FUDGE 0.4 # else # error("NOP_FUDGE configuration required") diff --git a/platforms/chibios/flash.mk b/platforms/chibios/flash.mk index c0b32c2f2b..31f69595da 100644 --- a/platforms/chibios/flash.mk +++ b/platforms/chibios/flash.mk @@ -82,6 +82,8 @@ else ifeq ($(strip $(MCU_FAMILY)),MIMXRT1062) $(UNSYNC_OUTPUT_CMD) && $(call EXEC_TEENSY) else ifeq ($(strip $(MCU_FAMILY)),STM32) $(UNSYNC_OUTPUT_CMD) && $(call EXEC_DFU_UTIL) +else ifeq ($(strip $(MCU_FAMILY)),GD32V) + $(UNSYNC_OUTPUT_CMD) && $(call EXEC_DFU_UTIL) else $(PRINT_OK); $(SILENT) || printf "$(MSG_FLASH_BOOTLOADER)" endif diff --git a/quantum/mcu_selection.mk b/quantum/mcu_selection.mk index 622b4a82f8..7c4a617af0 100644 --- a/quantum/mcu_selection.mk +++ b/quantum/mcu_selection.mk @@ -541,6 +541,37 @@ ifneq (,$(filter $(MCU),STM32L412 STM32L422)) UF2_FAMILY ?= STM32L4 endif +ifneq ($(findstring GD32VF103, $(MCU)),) + # RISC-V + MCU = risc-v + + # RISC-V extensions and abi configuration + MCU_ARCH = rv32imac + MCU_ABI = ilp32 + MCU_CMODEL = medlow + + ## chip/board settings + # - the next two should match the directories in + # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = GD32V + MCU_SERIES = GD32VF103 + + # Linker script to use + # - it should exist either in /os/common/startup/RISCV-ECLIC/compilers/GCC/ld/ + # or /ld/ + MCU_LDSCRIPT ?= GD32VF103xB + + # Startup code to use + # - it should exist in /os/common/startup/RISCV-ECLIC/compilers/GCC/mk/ + MCU_STARTUP ?= gd32vf103 + + # Board: it should exist either in /os/hal/boards/, + # /boards/, or drivers/boards/ + BOARD ?= SIPEED_LONGAN_NANO + + USE_FPU ?= no +endif + ifneq (,$(filter $(MCU),at90usb162 atmega16u2 atmega32u2 atmega16u4 atmega32u4 at90usb646 at90usb647 at90usb1286 at90usb1287)) PROTOCOL = LUFA diff --git a/tmk_core/chibios.mk b/tmk_core/chibios.mk index 18839710be..cae840fa4f 100644 --- a/tmk_core/chibios.mk +++ b/tmk_core/chibios.mk @@ -27,29 +27,62 @@ endif OPT_OS = chibios CHIBIOS = $(TOP_DIR)/lib/chibios CHIBIOS_CONTRIB = $(TOP_DIR)/lib/chibios-contrib -# Startup files. Try a few different locations, for compability with old versions and -# for things hardware in the contrib repository -STARTUP_MK = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_$(MCU_STARTUP).mk -ifeq ("$(wildcard $(STARTUP_MK))","") - STARTUP_MK = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_$(MCU_STARTUP).mk - ifeq ("$(wildcard $(STARTUP_MK))","") - STARTUP_MK = $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_$(MCU_STARTUP).mk - endif + +# +# Startup, Port and Platform support selection +############################################################################## + +ifeq ($(strip $(MCU)), risc-v) + # RISC-V Support + # As of 7.4.2021 there is only one supported RISC-V platform in Chibios-Contrib, + # therefore all required settings are hard-coded + STARTUP_MK = $(CHIBIOS_CONTRIB)/os/common/startup/RISCV-ECLIC/compilers/GCC/mk/startup_$(MCU_STARTUP).mk + PORT_V = $(CHIBIOS_CONTRIB)/os/common/ports/RISCV-ECLIC/compilers/GCC/mk/port.mk + RULESPATH = $(CHIBIOS_CONTRIB)/os/common/startup/RISCV-ECLIC/compilers/GCC + PLATFORM_MK = $(CHIBIOS_CONTRIB)/os/hal/ports/GD/GD32VF103/platform.mk +else + # ARM Support + # Startup files. Try a few different locations, for compability with old versions and + # for things hardware in the contrib repository + STARTUP_MK = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_$(MCU_STARTUP).mk + ifeq ("$(wildcard $(STARTUP_MK))","") + STARTUP_MK = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_$(MCU_STARTUP).mk + ifeq ("$(wildcard $(STARTUP_MK))","") + STARTUP_MK = $(CHIBIOS_CONTRIB)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_$(MCU_STARTUP).mk + endif + endif + + # Compability with old version + PORT_V = $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v$(ARMV)m.mk + ifeq ("$(wildcard $(PORT_V))","") + PORT_V = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v$(ARMV)m.mk + endif + + RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC + ifeq ("$(wildcard $(RULESPATH)/rules.mk)","") + RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC + endif endif -include $(STARTUP_MK) -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk ifeq ("$(PLATFORM_NAME)","") - PLATFORM_NAME = platform + PLATFORM_NAME = platform endif -PLATFORM_MK = $(CHIBIOS)/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)/$(PLATFORM_NAME).mk ifeq ("$(wildcard $(PLATFORM_MK))","") -PLATFORM_MK = $(CHIBIOS_CONTRIB)/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)/$(PLATFORM_NAME).mk + PLATFORM_MK = $(CHIBIOS)/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)/$(PLATFORM_NAME).mk + ifeq ("$(wildcard $(PLATFORM_MK))","") + PLATFORM_MK = $(CHIBIOS_CONTRIB)/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)/$(PLATFORM_NAME).mk + endif endif + +include $(STARTUP_MK) +include $(PORT_V) include $(PLATFORM_MK) +# +# Board support selection. +############################################################################## + BOARD_MK := ifneq ("$(wildcard $(KEYBOARD_PATH_5)/boards/$(BOARD)/board.mk)","") @@ -77,13 +110,19 @@ else ifneq ("$(wildcard $(TOP_DIR)/platforms/chibios/boards/$(BOARD)/board/board endif ifeq ("$(wildcard $(BOARD_MK))","") - BOARD_MK = $(CHIBIOS)/os/hal/boards/$(BOARD)/board.mk - ifeq ("$(wildcard $(BOARD_MK))","") - BOARD_MK = $(CHIBIOS_CONTRIB)/os/hal/boards/$(BOARD)/board.mk - endif + BOARD_MK = $(CHIBIOS)/os/hal/boards/$(BOARD)/board.mk + ifeq ("$(wildcard $(BOARD_MK))","") + BOARD_MK = $(CHIBIOS_CONTRIB)/os/hal/boards/$(BOARD)/board.mk + endif endif -# Bootloader address +include $(BOARD_MK) + +# +# Bootloader selection. +############################################################################## + +# Set bootloader address if supplied. ifdef STM32_BOOTLOADER_ADDRESS OPT_DEFS += -DSTM32_BOOTLOADER_ADDRESS=$(STM32_BOOTLOADER_ADDRESS) endif @@ -113,6 +152,10 @@ else ifneq ("$(wildcard $(BOARD_PATH)/configs/bootloader_defs.h)","") OPT_DEFS += -include $(BOARD_PATH)/configs/bootloader_defs.h endif +# +# ChibiOS config selection. +############################################################################## + # Work out the config file directories ifneq ("$(wildcard $(KEYBOARD_PATH_5)/chconf.h)","") CHCONFDIR = $(KEYBOARD_PATH_5) @@ -130,6 +173,10 @@ else ifneq ("$(wildcard $(TOP_DIR)/platforms/boards/chibios/common/configs/chcon CHCONFDIR = $(TOP_DIR)/platforms/chibios/boards/common/configs endif +# +# HAL config selection. +############################################################################## + ifneq ("$(wildcard $(KEYBOARD_PATH_5)/halconf.h)","") HALCONFDIR = $(KEYBOARD_PATH_5) else ifneq ("$(wildcard $(KEYBOARD_PATH_4)/halconf.h)","") @@ -146,40 +193,10 @@ else ifneq ("$(wildcard $(TOP_DIR)/platforms/chibios/boards/common/configs/halco HALCONFDIR = $(TOP_DIR)/platforms/chibios/boards/common/configs endif -# HAL-OSAL files (optional). -include $(CHIBIOS)/os/hal/hal.mk - -ifeq ("$(PLATFORM_NAME)","") - PLATFORM_NAME = platform -endif - -PLATFORM_MK = $(CHIBIOS)/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)/$(PLATFORM_NAME).mk -ifeq ("$(wildcard $(PLATFORM_MK))","") -PLATFORM_MK = $(CHIBIOS_CONTRIB)/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)/$(PLATFORM_NAME).mk -endif -include $(PLATFORM_MK) - - -include $(BOARD_MK) --include $(CHIBIOS)/os/hal/osal/rt/osal.mk # ChibiOS <= 19.x --include $(CHIBIOS)/os/hal/osal/rt-nil/osal.mk # ChibiOS >= 20.x -# RTOS files (optional). -include $(CHIBIOS)/os/rt/rt.mk -# Compability with old version -PORT_V = $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v$(ARMV)m.mk -ifeq ("$(wildcard $(PORT_V))","") -PORT_V = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v$(ARMV)m.mk -endif -include $(PORT_V) -# Other files (optional). -include $(CHIBIOS)/os/hal/lib/streams/streams.mk - -RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC -ifeq ("$(wildcard $(RULESPATH)/rules.mk)","") -RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC -endif +# +# Linker script selection. +############################################################################## -# Define linker script file here ifneq ("$(wildcard $(KEYBOARD_PATH_5)/ld/$(MCU_LDSCRIPT).ld)","") LDSCRIPT = $(KEYBOARD_PATH_5)/ld/$(MCU_LDSCRIPT).ld else ifneq ("$(wildcard $(KEYBOARD_PATH_4)/ld/$(MCU_LDSCRIPT).ld)","") @@ -202,17 +219,30 @@ else LDSCRIPT = $(STARTUPLD)/$(MCU_LDSCRIPT).ld endif +# +# Include ChibiOS makefiles. +############################################################################## + +# HAL-OSAL files (optional). +include $(CHIBIOS)/os/hal/hal.mk +-include $(CHIBIOS)/os/hal/osal/rt/osal.mk # ChibiOS <= 19.x +-include $(CHIBIOS)/os/hal/osal/rt-nil/osal.mk # ChibiOS >= 20.x +# RTOS files (optional). +include $(CHIBIOS)/os/rt/rt.mk +# Other files (optional). +include $(CHIBIOS)/os/hal/lib/streams/streams.mk + CHIBISRC = $(STARTUPSRC) \ - $(KERNSRC) \ - $(PORTSRC) \ - $(OSALSRC) \ - $(HALSRC) \ - $(PLATFORMSRC) \ - $(BOARDSRC) \ - $(STREAMSSRC) \ - $(CHIBIOS)/os/various/syscalls.c \ - $(PLATFORM_COMMON_DIR)/syscall-fallbacks.c \ - $(PLATFORM_COMMON_DIR)/wait.c + $(KERNSRC) \ + $(PORTSRC) \ + $(OSALSRC) \ + $(HALSRC) \ + $(PLATFORMSRC) \ + $(BOARDSRC) \ + $(STREAMSSRC) \ + $(CHIBIOS)/os/various/syscalls.c \ + $(PLATFORM_COMMON_DIR)/syscall-fallbacks.c \ + $(PLATFORM_COMMON_DIR)/wait.c # Ensure the ASM files are not subjected to LTO -- it'll strip out interrupt handlers otherwise. QUANTUM_LIB_SRC += $(STARTUPASM) $(PORTASM) $(OSALASM) $(PLATFORMASM) @@ -247,9 +277,9 @@ else ifneq ("$(wildcard $(TOP_DIR)/platforms/chibios/boards/$(BOARD)/configs/hal endif ifeq ($(strip $(USE_CHIBIOS_CONTRIB)),yes) - include $(CHIBIOS_CONTRIB)/os/hal/hal.mk - CHIBISRC += $(PLATFORMSRC_CONTRIB) $(HALSRC_CONTRIB) - EXTRAINCDIRS += $(PLATFORMINC_CONTRIB) $(HALINC_CONTRIB) $(CHIBIOS_CONTRIB)/os/various + include $(CHIBIOS_CONTRIB)/os/hal/hal.mk + CHIBISRC += $(PLATFORMSRC_CONTRIB) $(HALSRC_CONTRIB) + EXTRAINCDIRS += $(PLATFORMINC_CONTRIB) $(HALINC_CONTRIB) $(CHIBIOS_CONTRIB)/os/various endif # @@ -267,61 +297,123 @@ ifneq ("$(wildcard $(BOARD_PATH)/configs/post_config.h)","") endif ############################################################################## -# Compiler settings +# Compiler and Linker configuration # -CC = arm-none-eabi-gcc -OBJCOPY = arm-none-eabi-objcopy -OBJDUMP = arm-none-eabi-objdump -SIZE = arm-none-eabi-size -AR = arm-none-eabi-ar -NM = arm-none-eabi-nm -HEX = $(OBJCOPY) -O $(FORMAT) -EEP = -BIN = $(OBJCOPY) -O binary - -THUMBFLAGS = -DTHUMB_PRESENT -mno-thumb-interwork -DTHUMB_NO_INTERWORKING -mthumb -DTHUMB - -COMPILEFLAGS += -fomit-frame-pointer -COMPILEFLAGS += -falign-functions=16 -COMPILEFLAGS += -ffunction-sections -COMPILEFLAGS += -fdata-sections -COMPILEFLAGS += -fno-common -COMPILEFLAGS += -fshort-wchar -COMPILEFLAGS += $(THUMBFLAGS) - -# FPU options default (Cortex-M4 and Cortex-M7 single precision). -USE_FPU_OPT ?= -mfloat-abi=hard -mfpu=fpv4-sp-d16 -fsingle-precision-constant - -# FPU-related options -USE_FPU ?= no -ifneq ($(USE_FPU),no) - COMPILEFLAGS += $(USE_FPU_OPT) - OPT_DEFS += -DCORTEX_USE_FPU=TRUE + +# Use defined stack sizes of the main thread in linker scripts +LDSYMBOLS =--defsym=__process_stack_size__=$(USE_PROCESS_STACKSIZE),--defsym=__main_stack_size__=$(USE_EXCEPTIONS_STACKSIZE) + +# Shared Compiler flags for all toolchains +SHARED_CFLAGS = -fomit-frame-pointer \ + -ffunction-sections \ + -fdata-sections \ + -fno-common \ + -fshort-wchar + +# Shared Linker flags for all toolchains +SHARED_LDFLAGS = -T $(LDSCRIPT) \ + -Wl,$(LDSYMBOLS) \ + -Wl,--gc-sections \ + -nostartfiles + +ifeq ($(strip $(MCU)), risc-v) + # RISC-V toolchain specific configuration + # Find suitable GCC compiler + ifeq ($(strip $(TOOLCHAIN)),) + ifneq ($(shell which riscv32-unknown-elf-gcc 2>/dev/null),) + TOOLCHAIN = riscv32-unknown-elf- + else + ifneq ($(shell which riscv64-unknown-elf-gcc 2>/dev/null),) + TOOLCHAIN = riscv64-unknown-elf- + else + $(error "No RISC-V toolchain found. Can't find riscv32-unknown-elf-gcc or riscv64-unknown-elf-gcc found in your systems PATH variable. Please install a valid toolchain and make it accessible!") + endif + endif + endif + + # Default to compiling with picolibc for RISC-V targets if available, + # which is available by default on current (bullseye) debian based systems. + ifeq ($(shell $(TOOLCHAIN)gcc --specs=picolibc.specs -E - 2>/dev/null >/dev/null #if !defined(FEE_PAGE_SIZE) || !defined(FEE_PAGE_COUNT) -# if defined(STM32F103xB) || defined(STM32F042x6) +# if defined(STM32F103xB) || defined(STM32F042x6) || defined(GD32VF103C8) || defined(GD32VF103CB) # ifndef FEE_PAGE_SIZE # define FEE_PAGE_SIZE 0x400 // Page size = 1KByte # endif @@ -45,7 +45,9 @@ #if !defined(FEE_MCU_FLASH_SIZE) # if defined(STM32F042x6) # define FEE_MCU_FLASH_SIZE 32 // Size in Kb -# elif defined(STM32F103xB) || defined(STM32F072xB) || defined(STM32F070xB) +# elif defined(GD32VF103C8) +# define FEE_MCU_FLASH_SIZE 64 // Size in Kb +# elif defined(STM32F103xB) || defined(STM32F072xB) || defined(STM32F070xB) || defined(GD32VF103CB) # define FEE_MCU_FLASH_SIZE 128 // Size in Kb # elif defined(STM32F303xC) || defined(STM32F401xC) # define FEE_MCU_FLASH_SIZE 256 // Size in Kb diff --git a/tmk_core/common/chibios/flash_stm32.c b/tmk_core/common/chibios/flash_stm32.c index 35fb0eebdb..72c41b8b78 100644 --- a/tmk_core/common/chibios/flash_stm32.c +++ b/tmk_core/common/chibios/flash_stm32.c @@ -23,6 +23,11 @@ # define FLASH_SR_WRPERR FLASH_SR_WRPRTERR #endif +#if defined(MCU_GD32V) +/* GigaDevice GD32VF103 is a STM32F103 clone at heart. */ +# include "gd32v_compatibility.h" +#endif + #if defined(STM32F4XX) # define FLASH_SR_PGERR (FLASH_SR_PGSERR | FLASH_SR_PGPERR | FLASH_SR_PGAERR) diff --git a/tmk_core/common/chibios/gd32v_compatibility.h b/tmk_core/common/chibios/gd32v_compatibility.h new file mode 100644 index 0000000000..f4dcfd8c55 --- /dev/null +++ b/tmk_core/common/chibios/gd32v_compatibility.h @@ -0,0 +1,120 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +/* GD32VF103 has the same API as STM32F103, but uses different names for literally the same thing. + * As of 23.7.2021 QMK is tailored to use STM32 defines/names, for compatibility sake + * we just redefine the GD32 names. */ + +/* Close your eyes kids. */ +#define MCU_STM32 + +/* AFIO redefines */ +#define MAPR PCF0 +#define AFIO_MAPR_USART1_REMAP AFIO_PCF0_USART0_REMAP +#define AFIO_MAPR_USART2_REMAP AFIO_PCF0_USART1_REMAP +#define AFIO_MAPR_USART3_REMAP_PARTIALREMAP AFIO_PCF0_USART2_REMAP_PARTIALREMAP +#define AFIO_MAPR_USART3_REMAP_FULLREMAP AFIO_PCF0_USART2_REMAP_FULLREMAP + +/* DMA redefines. */ +#define STM32_DMA_STREAM(stream) GD32_DMA_STREAM(stream) +#define STM32_DMA_STREAM_ID(peripheral, channel) GD32_DMA_STREAM_ID(peripheral - 1, channel - 1) +#define STM32_DMA_CR_DIR_M2P GD32_DMA_CTL_DIR_M2P +#define STM32_DMA_CR_PSIZE_WORD GD32_DMA_CTL_PWIDTH_WORD +#define STM32_DMA_CR_MSIZE_WORD GD32_DMA_CTL_MWIDTH_WORD +#define STM32_DMA_CR_MINC GD32_DMA_CTL_MNAGA +#define STM32_DMA_CR_CIRC GD32_DMA_CTL_CMEN +#define STM32_DMA_CR_PL GD32_DMA_CTL_PRIO +#define STM32_DMA_CR_CHSEL GD32_DMA_CTL_CHSEL +#define cr1 ctl0 +#define cr2 ctl1 +#define cr3 ctl2 +#define dier dmainten + +/* ADC redefines */ +#if HAL_USE_ADC +# define STM32_ADC_USE_ADC1 GD32_ADC_USE_ADC0 + +# define smpr1 sampt0 +# define smpr2 sampt1 +# define sqr1 rsq0 +# define sqr2 rsq1 +# define sqr3 rsq2 + +# define ADC_SMPR2_SMP_AN0 ADC_SAMPT1_SMP_SPT0 +# define ADC_SMPR2_SMP_AN1 ADC_SAMPT1_SMP_SPT1 +# define ADC_SMPR2_SMP_AN2 ADC_SAMPT1_SMP_SPT2 +# define ADC_SMPR2_SMP_AN3 ADC_SAMPT1_SMP_SPT3 +# define ADC_SMPR2_SMP_AN4 ADC_SAMPT1_SMP_SPT4 +# define ADC_SMPR2_SMP_AN5 ADC_SAMPT1_SMP_SPT5 +# define ADC_SMPR2_SMP_AN6 ADC_SAMPT1_SMP_SPT6 +# define ADC_SMPR2_SMP_AN7 ADC_SAMPT1_SMP_SPT7 +# define ADC_SMPR2_SMP_AN8 ADC_SAMPT1_SMP_SPT8 +# define ADC_SMPR2_SMP_AN9 ADC_SAMPT1_SMP_SPT9 + +# define ADC_SMPR1_SMP_AN10 ADC_SAMPT0_SMP_SPT10 +# define ADC_SMPR1_SMP_AN11 ADC_SAMPT0_SMP_SPT11 +# define ADC_SMPR1_SMP_AN12 ADC_SAMPT0_SMP_SPT12 +# define ADC_SMPR1_SMP_AN13 ADC_SAMPT0_SMP_SPT13 +# define ADC_SMPR1_SMP_AN14 ADC_SAMPT0_SMP_SPT14 +# define ADC_SMPR1_SMP_AN15 ADC_SAMPT0_SMP_SPT15 + +# define ADC_SQR3_SQ1_N ADC_RSQ2_RSQ1_N +#endif + +/* FLASH redefines */ +#if defined(EEPROM_ENABLE) +# define SR STAT +# define FLASH_SR_BSY FLASH_STAT_BUSY +# define FLASH_SR_PGERR FLASH_STAT_PGERR +# define FLASH_SR_EOP FLASH_STAT_ENDF +# define FLASH_SR_WRPRTERR FLASH_STAT_WPERR +# define FLASH_SR_WRPERR FLASH_SR_WRPRTERR +# define FLASH_OBR_OPTERR FLASH_OBSTAT_OBERR +# define AR ADDR +# define CR CTL +# define FLASH_CR_PER FLASH_CTL_PER +# define FLASH_CR_STRT FLASH_CTL_START +# define FLASH_CR_LOCK FLASH_CTL_LK +# define FLASH_CR_PG FLASH_CTL_PG +# define KEYR KEY +#endif + +/* Serial USART redefines. */ +#if HAL_USE_SERIAL +# if !defined(SERIAL_USART_CR1) +# define SERIAL_USART_CR1 (USART_CTL0_PCEN | USART_CTL0_PM | USART_CTL0_WL) // parity enable, odd parity, 9 bit length +# endif +# if !defined(SERIAL_USART_CR2) +# define SERIAL_USART_CR2 (USART_CTL1_STB_1) // 2 stop bits +# endif +# if !defined(SERIAL_USART_CR3) +# define SERIAL_USART_CR3 0x0 +# endif +# define USART_CR3_HDSEL USART_CTL2_HDEN +# define CCR CHCV +#endif + +/* SPI redefines. */ +#if HAL_USE_SPI +# define SPI_CR1_LSBFIRST SPI_CTL0_LF +# define SPI_CR1_CPHA SPI_CTL0_CKPH +# define SPI_CR1_CPOL SPI_CTL0_CKPL +# define SPI_CR1_BR_0 SPI_CTL0_PSC_0 +# define SPI_CR1_BR_1 SPI_CTL0_PSC_1 +# define SPI_CR1_BR_2 SPI_CTL0_PSC_2 +#endif diff --git a/tmk_core/common/chibios/syscall-fallbacks.c b/tmk_core/common/chibios/syscall-fallbacks.c index 739017ae1d..4569879c7c 100644 --- a/tmk_core/common/chibios/syscall-fallbacks.c +++ b/tmk_core/common/chibios/syscall-fallbacks.c @@ -18,6 +18,12 @@ #include #include +/* To compile the ChibiOS syscall stubs with picolibc + * the _reent struct has to be defined. */ +#if defined(USE_PICOLIBC) +struct _reent; +#endif + #pragma GCC diagnostic ignored "-Wmissing-prototypes" __attribute__((weak, used)) int _open_r(struct _reent *r, const char *path, int flag, int m) { diff --git a/util/install/arch.sh b/util/install/arch.sh index bef98ac37f..33c39212d3 100755 --- a/util/install/arch.sh +++ b/util/install/arch.sh @@ -6,7 +6,8 @@ _qmk_install() { sudo pacman --needed --noconfirm -S \ base-devel clang diffutils gcc git unzip wget zip python-pip \ avr-binutils arm-none-eabi-binutils arm-none-eabi-gcc \ - arm-none-eabi-newlib avrdude dfu-programmer dfu-util + arm-none-eabi-newlib avrdude dfu-programmer dfu-util \ + riscv64-elf-binutils riscv64-elf-gcc riscv64-elf-newlib sudo pacman --needed --noconfirm -U https://archive.archlinux.org/packages/a/avr-gcc/avr-gcc-8.3.0-1-x86_64.pkg.tar.xz sudo pacman --needed --noconfirm -S avr-libc # Must be installed after the above, or it will bring in the latest avr-gcc instead diff --git a/util/install/debian.sh b/util/install/debian.sh index 57588e371a..2a188334b6 100755 --- a/util/install/debian.sh +++ b/util/install/debian.sh @@ -15,7 +15,8 @@ _qmk_install() { build-essential clang-format diffutils gcc git unzip wget zip \ python3-pip binutils-avr gcc-avr avr-libc binutils-arm-none-eabi \ gcc-arm-none-eabi libnewlib-arm-none-eabi avrdude dfu-programmer \ - dfu-util teensy-loader-cli libhidapi-hidraw0 libusb-dev + dfu-util teensy-loader-cli libhidapi-hidraw0 libusb-dev \ + picolibc-riscv64-unknown-elf gcc-riscv64-unknown-elf binutils-riscv64-unknown-elf python3 -m pip install --user -r $QMK_FIRMWARE_DIR/requirements.txt } From 01b702bece4de0aa17c1df39a3305a1b643fd762 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Mon, 18 Oct 2021 12:55:44 +0100 Subject: [PATCH 307/595] Split out HAPTIC_ENABLE to have separate DRIVER option (#14854) * DRIVER -> ENABLE * Update generic_features.mk Co-authored-by: Ryan * Update common_features.mk Co-authored-by: Ryan --- common_features.mk | 24 ++++++++----------- docs/feature_haptic_feedback.md | 7 ++++-- docs/ja/feature_haptic_feedback.md | 7 ++++-- generic_features.mk | 1 + keyboards/boston_meetup/2019/rules.mk | 3 ++- keyboards/c39/keymaps/drashna/rules.mk | 3 ++- keyboards/hadron/ver3/rules.mk | 3 ++- .../model_m_4th_gen/overnumpad_1xb/rules.mk | 3 ++- keyboards/splitkb/zima/rules.mk | 7 +++--- .../overnumpad_1xb/rules.mk | 3 ++- .../overnumpad_1xb/rules.mk | 4 +++- .../overnumpad_1xb/rules.mk | 3 ++- .../overnumpad_1xb/rules.mk | 3 ++- keyboards/xw60/rules.mk | 3 ++- layouts/community/ortho_4x12/drashna/rules.mk | 1 - lib/python/qmk/info.py | 5 ---- 16 files changed, 44 insertions(+), 36 deletions(-) diff --git a/common_features.mk b/common_features.mk index 7dd63be5be..9b9425dc33 100644 --- a/common_features.mk +++ b/common_features.mk @@ -495,23 +495,19 @@ ifeq ($(strip $(CRC_ENABLE)), yes) SRC += crc.c endif -HAPTIC_ENABLE ?= no -ifneq ($(strip $(HAPTIC_ENABLE)),no) +ifeq ($(strip $(HAPTIC_ENABLE)),yes) COMMON_VPATH += $(DRIVER_PATH)/haptic - OPT_DEFS += -DHAPTIC_ENABLE - SRC += $(QUANTUM_DIR)/haptic.c - SRC += $(QUANTUM_DIR)/process_keycode/process_haptic.c -endif -ifneq ($(filter DRV2605L, $(HAPTIC_ENABLE)), ) - SRC += DRV2605L.c - QUANTUM_LIB_SRC += i2c_master.c - OPT_DEFS += -DDRV2605L -endif + ifneq ($(filter DRV2605L, $(HAPTIC_DRIVER)), ) + SRC += DRV2605L.c + QUANTUM_LIB_SRC += i2c_master.c + OPT_DEFS += -DDRV2605L + endif -ifneq ($(filter SOLENOID, $(HAPTIC_ENABLE)), ) - SRC += solenoid.c - OPT_DEFS += -DSOLENOID_ENABLE + ifneq ($(filter SOLENOID, $(HAPTIC_DRIVER)), ) + SRC += solenoid.c + OPT_DEFS += -DSOLENOID_ENABLE + endif endif ifeq ($(strip $(HD44780_ENABLE)), yes) diff --git a/docs/feature_haptic_feedback.md b/docs/feature_haptic_feedback.md index a12bb4bcd0..4054c5d9b7 100644 --- a/docs/feature_haptic_feedback.md +++ b/docs/feature_haptic_feedback.md @@ -4,9 +4,12 @@ The following options are currently available for haptic feedback in `rules.mk`: -`HAPTIC_ENABLE += DRV2605L` +``` +HAPTIC_ENABLE = yes -`HAPTIC_ENABLE += SOLENOID` +HAPTIC_DRIVER += DRV2605L +HAPTIC_DRIVER += SOLENOID +``` ## Known Supported Hardware diff --git a/docs/ja/feature_haptic_feedback.md b/docs/ja/feature_haptic_feedback.md index 1580797253..687788014a 100644 --- a/docs/ja/feature_haptic_feedback.md +++ b/docs/ja/feature_haptic_feedback.md @@ -9,9 +9,12 @@ 現在のところ、`rules.mk` で触覚フィードバック用に以下のオプションを利用可能です: -`HAPTIC_ENABLE += DRV2605L` +``` +HAPTIC_ENABLE = yes -`HAPTIC_ENABLE += SOLENOID` +HAPTIC_DRIVER += DRV2605L +HAPTIC_DRIVER += SOLENOID +``` ## サポートされる既知のハードウェア diff --git a/generic_features.mk b/generic_features.mk index c455c83dd5..ff02d56bbe 100644 --- a/generic_features.mk +++ b/generic_features.mk @@ -25,6 +25,7 @@ GENERIC_FEATURES = \ DYNAMIC_MACRO \ ENCODER \ GRAVE_ESC \ + HAPTIC \ KEY_LOCK \ KEY_OVERRIDE \ LEADER \ diff --git a/keyboards/boston_meetup/2019/rules.mk b/keyboards/boston_meetup/2019/rules.mk index b7b6870a2b..6468f47b7d 100644 --- a/keyboards/boston_meetup/2019/rules.mk +++ b/keyboards/boston_meetup/2019/rules.mk @@ -22,6 +22,7 @@ AUDIO_ENABLE = yes # Audio output RGBLIGHT_ENABLE = no RGB_MATRIX_ENABLE = no RGB_MATRIX_DRIVER = WS2812 -HAPTIC_ENABLE += DRV2605L +HAPTIC_ENABLE = yes +HAPTIC_DRIVER = DRV2605L OLED_ENABLE = yes OLED_DRIVER = SSD1306 diff --git a/keyboards/c39/keymaps/drashna/rules.mk b/keyboards/c39/keymaps/drashna/rules.mk index c05f6a4be4..0e5a4cbebd 100644 --- a/keyboards/c39/keymaps/drashna/rules.mk +++ b/keyboards/c39/keymaps/drashna/rules.mk @@ -13,6 +13,7 @@ COMMAND_ENABLE = yes NKRO_ENABLE = yes AUDIO_ENABLE = yes UNICODE_ENABLE = yes -HAPTIC_ENABLE = SOLENOID +HAPTIC_ENABLE = yes +HAPTIC_DRIVER = SOLENOID RGBLIGHT_STARTUP_ANIMATION = yes diff --git a/keyboards/hadron/ver3/rules.mk b/keyboards/hadron/ver3/rules.mk index ad753a5ff1..c8681a1418 100644 --- a/keyboards/hadron/ver3/rules.mk +++ b/keyboards/hadron/ver3/rules.mk @@ -21,7 +21,8 @@ AUDIO_ENABLE = yes RGBLIGHT_ENABLE = yes RGB_MATRIX_ENABLE = no # once arm_rgb is implemented RGB_MATRIX_DRIVER = WS2812 -HAPTIC_ENABLE += DRV2605L +HAPTIC_ENABLE = yes +HAPTIC_DRIVER = DRV2605L OLED_ENABLE = yes OLED_DRIVER = SSD1306 ENCODER_ENABLER = yes diff --git a/keyboards/ibm/model_m_4th_gen/overnumpad_1xb/rules.mk b/keyboards/ibm/model_m_4th_gen/overnumpad_1xb/rules.mk index 507f4fcd37..7837adcbd3 100644 --- a/keyboards/ibm/model_m_4th_gen/overnumpad_1xb/rules.mk +++ b/keyboards/ibm/model_m_4th_gen/overnumpad_1xb/rules.mk @@ -22,4 +22,5 @@ ENCODER_ENABLE = no # Enable rotary encoder support AUDIO_ENABLE = no # Audio output KEYBOARD_SHARED_EP = yes # Free up some extra endpoints - needed if console+mouse+extra -HAPTIC_ENABLE += SOLENOID +HAPTIC_ENABLE = yes +HAPTIC_DRIVER = SOLENOID diff --git a/keyboards/splitkb/zima/rules.mk b/keyboards/splitkb/zima/rules.mk index ecb6fd7cf1..657475a020 100644 --- a/keyboards/splitkb/zima/rules.mk +++ b/keyboards/splitkb/zima/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug @@ -22,7 +22,8 @@ AUDIO_ENABLE = yes # Audio output ENCODER_ENABLE = yes # ENables the use of one or more encoders OLED_ENABLE = yes -OLED_DRIVER = SSD1306 # Enables the use of OLED displays -HAPTIC_ENABLE += DRV2605L # Supported but not included by defaut +OLED_DRIVER = SSD1306 # Enables the use of OLED displays +HAPTIC_ENABLE = yes # Supported but not included by defaut +HAPTIC_DRIVER = DRV2605L LTO_ENABLE = yes diff --git a/keyboards/unicomp/classic_ultracl_post_2013/overnumpad_1xb/rules.mk b/keyboards/unicomp/classic_ultracl_post_2013/overnumpad_1xb/rules.mk index 507f4fcd37..7837adcbd3 100644 --- a/keyboards/unicomp/classic_ultracl_post_2013/overnumpad_1xb/rules.mk +++ b/keyboards/unicomp/classic_ultracl_post_2013/overnumpad_1xb/rules.mk @@ -22,4 +22,5 @@ ENCODER_ENABLE = no # Enable rotary encoder support AUDIO_ENABLE = no # Audio output KEYBOARD_SHARED_EP = yes # Free up some extra endpoints - needed if console+mouse+extra -HAPTIC_ENABLE += SOLENOID +HAPTIC_ENABLE = yes +HAPTIC_DRIVER = SOLENOID diff --git a/keyboards/unicomp/classic_ultracl_pre_2013/overnumpad_1xb/rules.mk b/keyboards/unicomp/classic_ultracl_pre_2013/overnumpad_1xb/rules.mk index 30eb89bb7e..2886985a0d 100644 --- a/keyboards/unicomp/classic_ultracl_pre_2013/overnumpad_1xb/rules.mk +++ b/keyboards/unicomp/classic_ultracl_pre_2013/overnumpad_1xb/rules.mk @@ -22,5 +22,7 @@ ENCODER_ENABLE = no # Enable rotary encoder support AUDIO_ENABLE = no # Audio output KEYBOARD_SHARED_EP = yes # Free up some extra endpoints - needed if console+mouse+extra -HAPTIC_ENABLE += SOLENOID +HAPTIC_ENABLE = yes +HAPTIC_DRIVER = SOLENOID + LAYOUTS = fullsize_ansi fullsize_iso diff --git a/keyboards/unicomp/spacesaver_m_post_2013/overnumpad_1xb/rules.mk b/keyboards/unicomp/spacesaver_m_post_2013/overnumpad_1xb/rules.mk index 507f4fcd37..7837adcbd3 100644 --- a/keyboards/unicomp/spacesaver_m_post_2013/overnumpad_1xb/rules.mk +++ b/keyboards/unicomp/spacesaver_m_post_2013/overnumpad_1xb/rules.mk @@ -22,4 +22,5 @@ ENCODER_ENABLE = no # Enable rotary encoder support AUDIO_ENABLE = no # Audio output KEYBOARD_SHARED_EP = yes # Free up some extra endpoints - needed if console+mouse+extra -HAPTIC_ENABLE += SOLENOID +HAPTIC_ENABLE = yes +HAPTIC_DRIVER = SOLENOID diff --git a/keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/rules.mk b/keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/rules.mk index 507f4fcd37..7837adcbd3 100644 --- a/keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/rules.mk +++ b/keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/rules.mk @@ -22,4 +22,5 @@ ENCODER_ENABLE = no # Enable rotary encoder support AUDIO_ENABLE = no # Audio output KEYBOARD_SHARED_EP = yes # Free up some extra endpoints - needed if console+mouse+extra -HAPTIC_ENABLE += SOLENOID +HAPTIC_ENABLE = yes +HAPTIC_DRIVER = SOLENOID diff --git a/keyboards/xw60/rules.mk b/keyboards/xw60/rules.mk index 5921be64c3..fc192e0593 100644 --- a/keyboards/xw60/rules.mk +++ b/keyboards/xw60/rules.mk @@ -17,6 +17,7 @@ NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: ht BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality AUDIO_ENABLE = no # Audio output RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. -HAPTIC_ENABLE += SOLENOID +HAPTIC_ENABLE = yes +HAPTIC_DRIVER = SOLENOID # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/layouts/community/ortho_4x12/drashna/rules.mk b/layouts/community/ortho_4x12/drashna/rules.mk index 775ad8e6eb..8c3e126636 100644 --- a/layouts/community/ortho_4x12/drashna/rules.mk +++ b/layouts/community/ortho_4x12/drashna/rules.mk @@ -28,7 +28,6 @@ ifeq ($(strip $(KEYBOARD)), planck/light) RGBLIGHT_ENABLE = yes RGBLIGHT_STARTUP_ANIMATION = yes AUDIO_ENABLE = yes - # HAPTIC_ENABLE += SOLENOID endif ifeq ($(strip $(KEYBOARD)), planck/ez) RGBLIGHT_ENABLE = no diff --git a/lib/python/qmk/info.py b/lib/python/qmk/info.py index 5eb10e3cef..c3bbcf3eb0 100644 --- a/lib/python/qmk/info.py +++ b/lib/python/qmk/info.py @@ -112,11 +112,6 @@ def _extract_features(info_data, rules): if rules.get('BOOTMAGIC_ENABLE') == 'full': rules['BOOTMAGIC_ENABLE'] = 'on' - # Skip non-boolean features we haven't implemented special handling for - for feature in ('HAPTIC_ENABLE',): - if rules.get(feature): - del rules[feature] - # Process the rest of the rules as booleans for key, value in rules.items(): if key.endswith('_ENABLE'): From d9be6dea3a545da8d6f3d3ace14b6df7e9b6f30e Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Tue, 19 Oct 2021 08:29:27 +1100 Subject: [PATCH 308/595] Fix builds for ChibiOS + Cortex-M0[+] (#14879) --- tmk_core/chibios.mk | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/tmk_core/chibios.mk b/tmk_core/chibios.mk index cae840fa4f..ad0ffa762d 100644 --- a/tmk_core/chibios.mk +++ b/tmk_core/chibios.mk @@ -330,7 +330,7 @@ ifeq ($(strip $(MCU)), risc-v) endif endif endif - + # Default to compiling with picolibc for RISC-V targets if available, # which is available by default on current (bullseye) debian based systems. ifeq ($(shell $(TOOLCHAIN)gcc --specs=picolibc.specs -E - 2>/dev/null >/dev/null Date: Tue, 19 Oct 2021 16:26:59 +0200 Subject: [PATCH 309/595] [DOCS] Fix the STENO_COMBINEDMAP table (#14883) --- docs/feature_stenography.md | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/docs/feature_stenography.md b/docs/feature_stenography.md index af4754ed78..8d66034d4b 100644 --- a/docs/feature_stenography.md +++ b/docs/feature_stenography.md @@ -129,7 +129,8 @@ As defined in `keymap_steno.h`. |`STN_RES2`||(GeminiPR only)| |`STN_PWR`||(GeminiPR only)| -If you do not want to hit two keys with one finger combined keycodes can be used. These are also defined in `keymap_steno.h`, and causes both keys to be reported as pressed or released. To use these keycodes define `STENO_COMBINEDMAP` in your `config.h` file +If you do not want to hit two keys with one finger combined keycodes can be used. These are also defined in `keymap_steno.h`, and causes both keys to be reported as pressed or released. To use these keycodes define `STENO_COMBINEDMAP` in your `config.h` file. + |Combined key | Key1 | Key 2 | |---------------|--------|----------| |STN_S3 | STN_S1 | STN_S2 | From c9562ebfde8bab54c83215c4970163d19ce199b1 Mon Sep 17 00:00:00 2001 From: Sergey Vlasov Date: Wed, 20 Oct 2021 04:48:01 +0300 Subject: [PATCH 310/595] Make the MAGIC_TOGGLE_GUI keycode work (#14886) --- quantum/process_keycode/process_magic.c | 1 + 1 file changed, 1 insertion(+) diff --git a/quantum/process_keycode/process_magic.c b/quantum/process_keycode/process_magic.c index 01f2fb9289..d5cff4f12a 100644 --- a/quantum/process_keycode/process_magic.c +++ b/quantum/process_keycode/process_magic.c @@ -43,6 +43,7 @@ bool process_magic(uint16_t keycode, keyrecord_t *record) { switch (keycode) { case MAGIC_SWAP_CONTROL_CAPSLOCK ... MAGIC_TOGGLE_ALT_GUI: case MAGIC_SWAP_LCTL_LGUI ... MAGIC_EE_HANDS_RIGHT: + case MAGIC_TOGGLE_GUI: /* keymap config */ keymap_config.raw = eeconfig_read_keymap(); switch (keycode) { From 0fd45d59845d71e435f36975d9ba8a54dfb2a87d Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Tue, 19 Oct 2021 20:50:44 -0700 Subject: [PATCH 311/595] Fix type of Tap Dance max index variable (#14887) --- quantum/process_keycode/process_tap_dance.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/quantum/process_keycode/process_tap_dance.c b/quantum/process_keycode/process_tap_dance.c index 225b36cd5f..c707fdea30 100644 --- a/quantum/process_keycode/process_tap_dance.c +++ b/quantum/process_keycode/process_tap_dance.c @@ -20,7 +20,7 @@ uint8_t get_oneshot_mods(void); #endif static uint16_t last_td; -static int8_t highest_td = -1; +static int16_t highest_td = -1; void qk_tap_dance_pair_on_each_tap(qk_tap_dance_state_t *state, void *user_data) { qk_tap_dance_pair_t *pair = (qk_tap_dance_pair_t *)user_data; From 84d5198ef9b4106fe61530211b5b5bb1a2fc52c8 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Wed, 20 Oct 2021 20:07:40 +0100 Subject: [PATCH 312/595] Align PS/2 GPIO defines (#14745) * Align PS/2 GPIO * Align PS/2 GPIO * refactor more keyboards * Remove more defines * Put back avr/chibios split * format --- docs/feature_ps2_mouse.md | 34 +++---------- docs/ja/feature_ps2_mouse.md | 31 +++--------- keyboards/converter/ibm_terminal/config.h | 33 +++---------- .../evyd13/gh80_3700/keymaps/ps2/config.h | 10 +--- .../handwired/108key_trackpoint/config.h | 10 +--- keyboards/handwired/promethium/config.h | 30 +++--------- keyboards/handwired/trackpoint/config.h | 10 +--- keyboards/kapcave/paladin64/config.h | 20 ++------ tmk_core/protocol/ps2_interrupt.c | 18 +++---- tmk_core/protocol/ps2_io_avr.c | 49 ++++++++----------- tmk_core/protocol/ps2_io_chibios.c | 28 +++++------ tmk_core/protocol/ps2_usart.c | 13 +++++ 12 files changed, 94 insertions(+), 192 deletions(-) diff --git a/docs/feature_ps2_mouse.md b/docs/feature_ps2_mouse.md index 433a47fa9b..c980705ae7 100644 --- a/docs/feature_ps2_mouse.md +++ b/docs/feature_ps2_mouse.md @@ -39,14 +39,8 @@ In your keyboard config.h: ```c #ifdef PS2_USE_BUSYWAIT -# define PS2_CLOCK_PORT PORTD -# define PS2_CLOCK_PIN PIND -# define PS2_CLOCK_DDR DDRD -# define PS2_CLOCK_BIT 1 -# define PS2_DATA_PORT PORTD -# define PS2_DATA_PIN PIND -# define PS2_DATA_DDR DDRD -# define PS2_DATA_BIT 2 +# define PS2_CLOCK_PIN D1 +# define PS2_DATA_PIN D2 #endif ``` @@ -65,14 +59,8 @@ In your keyboard config.h: ```c #ifdef PS2_USE_INT -#define PS2_CLOCK_PORT PORTD -#define PS2_CLOCK_PIN PIND -#define PS2_CLOCK_DDR DDRD -#define PS2_CLOCK_BIT 2 -#define PS2_DATA_PORT PORTD -#define PS2_DATA_PIN PIND -#define PS2_DATA_DDR DDRD -#define PS2_DATA_BIT 5 +#define PS2_CLOCK_PIN D2 +#define PS2_DATA_PIN D5 #define PS2_INT_INIT() do { \ EICRA |= ((1<. */ #ifdef PS2_USE_USART /* XCK for clock line */ -#define PS2_CLOCK_PORT PORTD -#define PS2_CLOCK_PIN PIND -#define PS2_CLOCK_DDR DDRD -#define PS2_CLOCK_BIT 5 -/* RXD for data line */ -#define PS2_DATA_PORT PORTD -#define PS2_DATA_PIN PIND -#define PS2_DATA_DDR DDRD -#define PS2_DATA_BIT 2 +#define PS2_CLOCK_PIN D5 +#define PS2_DATA_PIN D2 /* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */ /* set DDR of CLOCK as input to be slave */ @@ -93,15 +86,8 @@ along with this program. If not, see . */ #ifdef PS2_USE_INT /* uses INT1 for clock line(ATMega32U4) */ -#define PS2_CLOCK_PORT PORTD -#define PS2_CLOCK_PIN PIND -#define PS2_CLOCK_DDR DDRD -#define PS2_CLOCK_BIT 1 - -#define PS2_DATA_PORT PORTD -#define PS2_DATA_PIN PIND -#define PS2_DATA_DDR DDRD -#define PS2_DATA_BIT 0 +#define PS2_CLOCK_PIN D1 +#define PS2_DATA_PIN D0 #define PS2_INT_INIT() do { \ EICRA |= ((1<. * PS/2 Busywait configuration */ #ifdef PS2_USE_BUSYWAIT -#define PS2_CLOCK_PORT PORTD -#define PS2_CLOCK_PIN PIND -#define PS2_CLOCK_DDR DDRD -#define PS2_CLOCK_BIT 1 - -#define PS2_DATA_PORT PORTD -#define PS2_DATA_PIN PIND -#define PS2_DATA_DDR DDRD -#define PS2_DATA_BIT 0 +#define PS2_CLOCK_PIN D1 +#define PS2_DATA_PIN D0 #endif diff --git a/keyboards/evyd13/gh80_3700/keymaps/ps2/config.h b/keyboards/evyd13/gh80_3700/keymaps/ps2/config.h index 44ac7dcd03..b77ac95d7d 100644 --- a/keyboards/evyd13/gh80_3700/keymaps/ps2/config.h +++ b/keyboards/evyd13/gh80_3700/keymaps/ps2/config.h @@ -17,14 +17,8 @@ #pragma once #ifdef PS2_USE_USART -#define PS2_CLOCK_PORT PORTD -#define PS2_CLOCK_PIN PIND -#define PS2_CLOCK_DDR DDRD -#define PS2_CLOCK_BIT 5 -#define PS2_DATA_PORT PORTD -#define PS2_DATA_PIN PIND -#define PS2_DATA_DDR DDRD -#define PS2_DATA_BIT 2 +#define PS2_CLOCK_PIN D5 +#define PS2_DATA_PIN D2 /* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */ /* set DDR of CLOCK as input to be slave */ diff --git a/keyboards/handwired/108key_trackpoint/config.h b/keyboards/handwired/108key_trackpoint/config.h index b1ac790d76..b5bf98271a 100644 --- a/keyboards/handwired/108key_trackpoint/config.h +++ b/keyboards/handwired/108key_trackpoint/config.h @@ -12,14 +12,8 @@ #define MATRIX_COLS 23 #ifdef PS2_USE_USART - #define PS2_CLOCK_PORT PORTD - #define PS2_CLOCK_PIN PIND - #define PS2_CLOCK_DDR DDRD - #define PS2_CLOCK_BIT 5 - #define PS2_DATA_PORT PORTD - #define PS2_DATA_PIN PIND - #define PS2_DATA_DDR DDRD - #define PS2_DATA_BIT 2 +#define PS2_CLOCK_PIN D5 +#define PS2_DATA_PIN D2 /* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */ /* set DDR of CLOCK as input to be slave */ diff --git a/keyboards/handwired/promethium/config.h b/keyboards/handwired/promethium/config.h index b146767d65..612675c63a 100644 --- a/keyboards/handwired/promethium/config.h +++ b/keyboards/handwired/promethium/config.h @@ -224,27 +224,15 @@ enum led_sequence { /* PS/2 mouse */ #ifdef PS2_USE_BUSYWAIT -# define PS2_CLOCK_PORT PORTD -# define PS2_CLOCK_PIN PIND -# define PS2_CLOCK_DDR DDRD -# define PS2_CLOCK_BIT 3 -# define PS2_DATA_PORT PORTD -# define PS2_DATA_PIN PIND -# define PS2_DATA_DDR DDRD -# define PS2_DATA_BIT 2 +# define PS2_CLOCK_PIN D3 +# define PS2_DATA_PIN D2 #endif /* PS/2 mouse interrupt version */ #ifdef PS2_USE_INT /* uses INT1 for clock line(ATMega32U4) */ -# define PS2_CLOCK_PORT PORTD -# define PS2_CLOCK_PIN PIND -# define PS2_CLOCK_DDR DDRD -# define PS2_CLOCK_BIT 3 -# define PS2_DATA_PORT PORTD -# define PS2_DATA_PIN PIND -# define PS2_DATA_DDR DDRD -# define PS2_DATA_BIT 2 +# define PS2_CLOCK_PIN D3 +# define PS2_DATA_PIN D2 # define PS2_INT_INIT() \ do { \ @@ -264,14 +252,8 @@ enum led_sequence { /* PS/2 mouse USART version */ #ifdef PS2_USE_USART /* XCK for clock line and RXD for data line */ -# define PS2_CLOCK_PORT PORTD -# define PS2_CLOCK_PIN PIND -# define PS2_CLOCK_DDR DDRD -# define PS2_CLOCK_BIT 5 -# define PS2_DATA_PORT PORTD -# define PS2_DATA_PIN PIND -# define PS2_DATA_DDR DDRD -# define PS2_DATA_BIT 2 +#define PS2_CLOCK_PIN D5 +#define PS2_DATA_PIN D2 /* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */ /* set DDR of CLOCK as input to be slave */ diff --git a/keyboards/handwired/trackpoint/config.h b/keyboards/handwired/trackpoint/config.h index 1429136f40..cf8b5605f4 100644 --- a/keyboards/handwired/trackpoint/config.h +++ b/keyboards/handwired/trackpoint/config.h @@ -12,14 +12,8 @@ #define MATRIX_COLS 3 #ifdef PS2_USE_USART - #define PS2_CLOCK_PORT PORTD - #define PS2_CLOCK_PIN PIND - #define PS2_CLOCK_DDR DDRD - #define PS2_CLOCK_BIT 5 - #define PS2_DATA_PORT PORTD - #define PS2_DATA_PIN PIND - #define PS2_DATA_DDR DDRD - #define PS2_DATA_BIT 2 +#define PS2_CLOCK_PIN D5 +#define PS2_DATA_PIN D2 /* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling edge */ /* set DDR of CLOCK as input to be slave */ diff --git a/keyboards/kapcave/paladin64/config.h b/keyboards/kapcave/paladin64/config.h index 2685be96cf..7c3d1a0fa1 100755 --- a/keyboards/kapcave/paladin64/config.h +++ b/keyboards/kapcave/paladin64/config.h @@ -34,14 +34,8 @@ along with this program. If not, see . /* Only required if you add in a trackpoint hardware to the pcb */ #ifdef PS2_USE_USART - #define PS2_CLOCK_PORT PORTD - #define PS2_CLOCK_PIN PIND - #define PS2_CLOCK_DDR DDRD - #define PS2_CLOCK_BIT 5 - #define PS2_DATA_PORT PORTD - #define PS2_DATA_PIN PIND - #define PS2_DATA_DDR DDRD - #define PS2_DATA_BIT 2 +#define PS2_CLOCK_PIN D5 +#define PS2_DATA_PIN D2 /* synchronous, odd parity, 1-bit stop, 8-bit data, sample at falling * edge */ @@ -77,14 +71,8 @@ along with this program. If not, see . #endif #ifdef PS2_USE_INT -#define PS2_CLOCK_PORT PORTD -#define PS2_CLOCK_PIN PIND -#define PS2_CLOCK_DDR DDRD -#define PS2_CLOCK_BIT 2 -#define PS2_DATA_PORT PORTD -#define PS2_DATA_PIN PIND -#define PS2_DATA_DDR DDRD -#define PS2_DATA_BIT 5 +#define PS2_CLOCK_PIN D2 +#define PS2_DATA_PIN D5 #define PS2_INT_INIT() do { \ EICRA |= ((1< -#include -#include +#include "ps2_io.h" +#include "gpio.h" +#include "wait.h" /* Check port settings for clock and data line */ -#if !(defined(PS2_CLOCK_PORT) && defined(PS2_CLOCK_PIN) && defined(PS2_CLOCK_DDR) && defined(PS2_CLOCK_BIT)) -# error "PS/2 clock port setting is required in config.h" +#if !(defined(PS2_CLOCK_PIN)) +# error "PS/2 clock setting is required in config.h" #endif -#if !(defined(PS2_DATA_PORT) && defined(PS2_DATA_PIN) && defined(PS2_DATA_DDR) && defined(PS2_DATA_BIT)) -# error "PS/2 data port setting is required in config.h" +#if !(defined(PS2_DATA_PIN)) +# error "PS/2 data setting is required in config.h" #endif /* @@ -17,21 +18,17 @@ void clock_init(void) {} void clock_lo(void) { - PS2_CLOCK_PORT &= ~(1 << PS2_CLOCK_BIT); - PS2_CLOCK_DDR |= (1 << PS2_CLOCK_BIT); + // Transition from input with pull-up to output low via Hi-Z instead of output high + writePinLow(PS2_CLOCK_PIN); + setPinOutput(PS2_CLOCK_PIN); } -void clock_hi(void) { - /* input with pull up */ - PS2_CLOCK_DDR &= ~(1 << PS2_CLOCK_BIT); - PS2_CLOCK_PORT |= (1 << PS2_CLOCK_BIT); -} +void clock_hi(void) { setPinInputHigh(PS2_CLOCK_PIN); } bool clock_in(void) { - PS2_CLOCK_DDR &= ~(1 << PS2_CLOCK_BIT); - PS2_CLOCK_PORT |= (1 << PS2_CLOCK_BIT); - _delay_us(1); - return PS2_CLOCK_PIN & (1 << PS2_CLOCK_BIT); + setPinInputHigh(PS2_CLOCK_PIN); + wait_us(1); + return readPin(PS2_CLOCK_PIN); } /* @@ -40,19 +37,15 @@ bool clock_in(void) { void data_init(void) {} void data_lo(void) { - PS2_DATA_PORT &= ~(1 << PS2_DATA_BIT); - PS2_DATA_DDR |= (1 << PS2_DATA_BIT); + // Transition from input with pull-up to output low via Hi-Z instead of output high + writePinLow(PS2_DATA_PIN); + setPinOutput(PS2_DATA_PIN); } -void data_hi(void) { - /* input with pull up */ - PS2_DATA_DDR &= ~(1 << PS2_DATA_BIT); - PS2_DATA_PORT |= (1 << PS2_DATA_BIT); -} +void data_hi(void) { setPinInputHigh(PS2_DATA_PIN); } bool data_in(void) { - PS2_DATA_DDR &= ~(1 << PS2_DATA_BIT); - PS2_DATA_PORT |= (1 << PS2_DATA_BIT); - _delay_us(1); - return PS2_DATA_PIN & (1 << PS2_DATA_BIT); + setPinInputHigh(PS2_DATA_PIN); + wait_us(1); + return readPin(PS2_DATA_PIN); } diff --git a/tmk_core/protocol/ps2_io_chibios.c b/tmk_core/protocol/ps2_io_chibios.c index b672bd1f47..906d85d848 100644 --- a/tmk_core/protocol/ps2_io_chibios.c +++ b/tmk_core/protocol/ps2_io_chibios.c @@ -6,11 +6,11 @@ #include "hal.h" /* Check port settings for clock and data line */ -#if !(defined(PS2_CLOCK)) +#if !(defined(PS2_CLOCK_PIN)) # error "PS/2 clock setting is required in config.h" #endif -#if !(defined(PS2_DATA)) +#if !(defined(PS2_DATA_PIN)) # error "PS/2 data setting is required in config.h" #endif @@ -20,18 +20,18 @@ void clock_init(void) {} void clock_lo(void) { - palSetLineMode(PS2_CLOCK, PAL_MODE_OUTPUT_OPENDRAIN); - palWriteLine(PS2_CLOCK, PAL_LOW); + palSetLineMode(PS2_CLOCK_PIN, PAL_MODE_OUTPUT_OPENDRAIN); + palWriteLine(PS2_CLOCK_PIN, PAL_LOW); } void clock_hi(void) { - palSetLineMode(PS2_CLOCK, PAL_MODE_OUTPUT_OPENDRAIN); - palWriteLine(PS2_CLOCK, PAL_HIGH); + palSetLineMode(PS2_CLOCK_PIN, PAL_MODE_OUTPUT_OPENDRAIN); + palWriteLine(PS2_CLOCK_PIN, PAL_HIGH); } bool clock_in(void) { - palSetLineMode(PS2_CLOCK, PAL_MODE_INPUT); - return palReadLine(PS2_CLOCK); + palSetLineMode(PS2_CLOCK_PIN, PAL_MODE_INPUT); + return palReadLine(PS2_CLOCK_PIN); } /* @@ -40,16 +40,16 @@ bool clock_in(void) { void data_init(void) {} void data_lo(void) { - palSetLineMode(PS2_DATA, PAL_MODE_OUTPUT_OPENDRAIN); - palWriteLine(PS2_DATA, PAL_LOW); + palSetLineMode(PS2_DATA_PIN, PAL_MODE_OUTPUT_OPENDRAIN); + palWriteLine(PS2_DATA_PIN, PAL_LOW); } void data_hi(void) { - palSetLineMode(PS2_DATA, PAL_MODE_OUTPUT_OPENDRAIN); - palWriteLine(PS2_DATA, PAL_HIGH); + palSetLineMode(PS2_DATA_PIN, PAL_MODE_OUTPUT_OPENDRAIN); + palWriteLine(PS2_DATA_PIN, PAL_HIGH); } bool data_in(void) { - palSetLineMode(PS2_DATA, PAL_MODE_INPUT); - return palReadLine(PS2_DATA); + palSetLineMode(PS2_DATA_PIN, PAL_MODE_INPUT); + return palReadLine(PS2_DATA_PIN); } diff --git a/tmk_core/protocol/ps2_usart.c b/tmk_core/protocol/ps2_usart.c index 6a66dc4a1e..5f70083698 100644 --- a/tmk_core/protocol/ps2_usart.c +++ b/tmk_core/protocol/ps2_usart.c @@ -46,6 +46,19 @@ POSSIBILITY OF SUCH DAMAGE. #include "ps2_io.h" #include "print.h" +#ifndef PS2_CLOCK_DDR +# define PS2_CLOCK_DDR PORTx_ADDRESS(PS2_CLOCK_PIN) +#endif +#ifndef PS2_CLOCK_BIT +# define PS2_CLOCK_BIT (PS2_CLOCK_PIN & 0xF) +#endif +#ifndef PS2_DATA_DDR +# define PS2_DATA_DDR PORTx_ADDRESS(PS2_DATA_PIN) +#endif +#ifndef PS2_DATA_BIT +# define PS2_DATA_BIT (PS2_DATA_PIN & 0xF) +#endif + #define WAIT(stat, us, err) \ do { \ if (!wait_##stat(us)) { \ From 5500c428dd41348243e8a1695986b0da070e2ffa Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Wed, 20 Oct 2021 21:04:23 +0100 Subject: [PATCH 313/595] Rename platform SRC variable (#14894) --- build_keyboard.mk | 8 ++++---- tmk_core/chibios.mk | 7 ++++--- 2 files changed, 8 insertions(+), 7 deletions(-) diff --git a/build_keyboard.mk b/build_keyboard.mk index 36807911d8..e5edacfd8a 100644 --- a/build_keyboard.mk +++ b/build_keyboard.mk @@ -435,15 +435,15 @@ ALL_CONFIGS := $(PROJECT_CONFIG) $(CONFIG_H) OUTPUTS := $(KEYMAP_OUTPUT) $(KEYBOARD_OUTPUT) $(KEYMAP_OUTPUT)_SRC := $(SRC) -$(KEYMAP_OUTPUT)_DEFS := $(OPT_DEFS) $(GFXDEFS) \ +$(KEYMAP_OUTPUT)_DEFS := $(OPT_DEFS) \ -DQMK_KEYBOARD=\"$(KEYBOARD)\" -DQMK_KEYBOARD_H=\"$(QMK_KEYBOARD_H)\" \ -DQMK_KEYMAP=\"$(KEYMAP)\" -DQMK_KEYMAP_H=\"$(KEYMAP).h\" -DQMK_KEYMAP_CONFIG_H=\"$(KEYMAP_PATH)/config.h\" \ -DQMK_SUBPROJECT -DQMK_SUBPROJECT_H -DQMK_SUBPROJECT_CONFIG_H $(KEYMAP_OUTPUT)_INC := $(VPATH) $(EXTRAINCDIRS) $(KEYMAP_OUTPUT)_CONFIG := $(CONFIG_H) -$(KEYBOARD_OUTPUT)_SRC := $(CHIBISRC) $(GFXSRC) -$(KEYBOARD_OUTPUT)_DEFS := $(PROJECT_DEFS) $(GFXDEFS) -$(KEYBOARD_OUTPUT)_INC := $(PROJECT_INC) $(GFXINC) +$(KEYBOARD_OUTPUT)_SRC := $(PLATFORM_SRC) +$(KEYBOARD_OUTPUT)_DEFS := $(PROJECT_DEFS) +$(KEYBOARD_OUTPUT)_INC := $(PROJECT_INC) $(KEYBOARD_OUTPUT)_CONFIG := $(PROJECT_CONFIG) # Default target. diff --git a/tmk_core/chibios.mk b/tmk_core/chibios.mk index ad0ffa762d..c520d6025b 100644 --- a/tmk_core/chibios.mk +++ b/tmk_core/chibios.mk @@ -232,7 +232,8 @@ include $(CHIBIOS)/os/rt/rt.mk # Other files (optional). include $(CHIBIOS)/os/hal/lib/streams/streams.mk -CHIBISRC = $(STARTUPSRC) \ +PLATFORM_SRC = \ + $(STARTUPSRC) \ $(KERNSRC) \ $(PORTSRC) \ $(OSALSRC) \ @@ -247,7 +248,7 @@ CHIBISRC = $(STARTUPSRC) \ # Ensure the ASM files are not subjected to LTO -- it'll strip out interrupt handlers otherwise. QUANTUM_LIB_SRC += $(STARTUPASM) $(PORTASM) $(OSALASM) $(PLATFORMASM) -CHIBISRC := $(patsubst $(TOP_DIR)/%,%,$(CHIBISRC)) +PLATFORM_SRC := $(patsubst $(TOP_DIR)/%,%,$(PLATFORM_SRC)) EXTRAINCDIRS += $(CHIBIOS)/os/license $(CHIBIOS)/os/oslib/include \ $(TOP_DIR)/platforms/chibios/boards/$(BOARD)/configs \ @@ -278,7 +279,7 @@ endif ifeq ($(strip $(USE_CHIBIOS_CONTRIB)),yes) include $(CHIBIOS_CONTRIB)/os/hal/hal.mk - CHIBISRC += $(PLATFORMSRC_CONTRIB) $(HALSRC_CONTRIB) + PLATFORM_SRC += $(PLATFORMSRC_CONTRIB) $(HALSRC_CONTRIB) EXTRAINCDIRS += $(PLATFORMINC_CONTRIB) $(HALINC_CONTRIB) $(CHIBIOS_CONTRIB)/os/various endif From d4be4b67a251ecc046d857c5cd00cfb37c394ab7 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Wed, 20 Oct 2021 21:18:49 +0100 Subject: [PATCH 314/595] Relocate PS2 code (#14895) * Relocate ps2 protocol code * clang * Move makefile logic --- common_features.mk | 34 +++++++++++++++++++ {tmk_core/protocol => drivers/ps2}/ps2.h | 0 .../protocol => drivers/ps2}/ps2_busywait.c | 0 .../protocol => drivers/ps2}/ps2_interrupt.c | 0 {tmk_core/protocol => drivers/ps2}/ps2_io.h | 0 .../protocol => drivers/ps2}/ps2_mouse.c | 10 ++---- .../protocol => drivers/ps2}/ps2_mouse.h | 0 .../avr/drivers/ps2/ps2_io.c | 0 .../avr/drivers/ps2}/ps2_usart.c | 1 + .../chibios/drivers/ps2/ps2_io.c | 0 tmk_core/protocol.mk | 25 -------------- 11 files changed, 38 insertions(+), 32 deletions(-) rename {tmk_core/protocol => drivers/ps2}/ps2.h (100%) rename {tmk_core/protocol => drivers/ps2}/ps2_busywait.c (100%) rename {tmk_core/protocol => drivers/ps2}/ps2_interrupt.c (100%) rename {tmk_core/protocol => drivers/ps2}/ps2_io.h (100%) rename {tmk_core/protocol => drivers/ps2}/ps2_mouse.c (98%) rename {tmk_core/protocol => drivers/ps2}/ps2_mouse.h (100%) rename tmk_core/protocol/ps2_io_avr.c => platforms/avr/drivers/ps2/ps2_io.c (100%) rename {tmk_core/protocol => platforms/avr/drivers/ps2}/ps2_usart.c (99%) rename tmk_core/protocol/ps2_io_chibios.c => platforms/chibios/drivers/ps2/ps2_io.c (100%) diff --git a/common_features.mk b/common_features.mk index 9b9425dc33..083aa4aaa4 100644 --- a/common_features.mk +++ b/common_features.mk @@ -576,6 +576,40 @@ ifeq ($(strip $(AUTO_SHIFT_ENABLE)), yes) endif endif +ifeq ($(strip $(PS2_MOUSE_ENABLE)), yes) + PS2_ENABLE := yes + SRC += ps2_mouse.c + OPT_DEFS += -DPS2_MOUSE_ENABLE + OPT_DEFS += -DMOUSE_ENABLE +endif + +ifeq ($(strip $(PS2_USE_BUSYWAIT)), yes) + PS2_ENABLE := yes + SRC += ps2_busywait.c + SRC += ps2_io_avr.c + OPT_DEFS += -DPS2_USE_BUSYWAIT +endif + +ifeq ($(strip $(PS2_USE_INT)), yes) + PS2_ENABLE := yes + SRC += ps2_interrupt.c + SRC += ps2_io.c + OPT_DEFS += -DPS2_USE_INT +endif + +ifeq ($(strip $(PS2_USE_USART)), yes) + PS2_ENABLE := yes + SRC += ps2_usart.c + SRC += ps2_io.c + OPT_DEFS += -DPS2_USE_USART +endif + +ifeq ($(strip $(PS2_ENABLE)), yes) + COMMON_VPATH += $(DRIVER_PATH)/ps2 + COMMON_VPATH += $(PLATFORM_PATH)/$(PLATFORM_KEY)/$(DRIVER_DIR)/ps2 + OPT_DEFS += -DPS2_ENABLE +endif + JOYSTICK_ENABLE ?= no VALID_JOYSTICK_TYPES := analog digital JOYSTICK_DRIVER ?= analog diff --git a/tmk_core/protocol/ps2.h b/drivers/ps2/ps2.h similarity index 100% rename from tmk_core/protocol/ps2.h rename to drivers/ps2/ps2.h diff --git a/tmk_core/protocol/ps2_busywait.c b/drivers/ps2/ps2_busywait.c similarity index 100% rename from tmk_core/protocol/ps2_busywait.c rename to drivers/ps2/ps2_busywait.c diff --git a/tmk_core/protocol/ps2_interrupt.c b/drivers/ps2/ps2_interrupt.c similarity index 100% rename from tmk_core/protocol/ps2_interrupt.c rename to drivers/ps2/ps2_interrupt.c diff --git a/tmk_core/protocol/ps2_io.h b/drivers/ps2/ps2_io.h similarity index 100% rename from tmk_core/protocol/ps2_io.h rename to drivers/ps2/ps2_io.h diff --git a/tmk_core/protocol/ps2_mouse.c b/drivers/ps2/ps2_mouse.c similarity index 98% rename from tmk_core/protocol/ps2_mouse.c rename to drivers/ps2/ps2_mouse.c index 39251a6434..8a6668b410 100644 --- a/tmk_core/protocol/ps2_mouse.c +++ b/drivers/ps2/ps2_mouse.c @@ -16,13 +16,9 @@ along with this program. If not, see . */ #include - -#if defined(__AVR__) -# include -#endif - #include "ps2_mouse.h" #include "wait.h" +#include "gpio.h" #include "host.h" #include "timer.h" #include "print.h" @@ -158,8 +154,8 @@ static inline void ps2_mouse_convert_report_to_hid(report_mouse_t *mouse_report) #ifdef PS2_MOUSE_INVERT_BUTTONS // swap left & right buttons - uint8_t needs_left = mouse_report->buttons & PS2_MOUSE_BTN_RIGHT; - uint8_t needs_right = mouse_report->buttons & PS2_MOUSE_BTN_LEFT; + uint8_t needs_left = mouse_report->buttons & PS2_MOUSE_BTN_RIGHT; + uint8_t needs_right = mouse_report->buttons & PS2_MOUSE_BTN_LEFT; mouse_report->buttons = (mouse_report->buttons & ~(PS2_MOUSE_BTN_MASK)) | (needs_left ? PS2_MOUSE_BTN_LEFT : 0) | (needs_right ? PS2_MOUSE_BTN_RIGHT : 0); #else // remove sign and overflow flags diff --git a/tmk_core/protocol/ps2_mouse.h b/drivers/ps2/ps2_mouse.h similarity index 100% rename from tmk_core/protocol/ps2_mouse.h rename to drivers/ps2/ps2_mouse.h diff --git a/tmk_core/protocol/ps2_io_avr.c b/platforms/avr/drivers/ps2/ps2_io.c similarity index 100% rename from tmk_core/protocol/ps2_io_avr.c rename to platforms/avr/drivers/ps2/ps2_io.c diff --git a/tmk_core/protocol/ps2_usart.c b/platforms/avr/drivers/ps2/ps2_usart.c similarity index 99% rename from tmk_core/protocol/ps2_usart.c rename to platforms/avr/drivers/ps2/ps2_usart.c index 5f70083698..151cfcd68f 100644 --- a/tmk_core/protocol/ps2_usart.c +++ b/platforms/avr/drivers/ps2/ps2_usart.c @@ -42,6 +42,7 @@ POSSIBILITY OF SUCH DAMAGE. #include #include #include +#include "gpio.h" #include "ps2.h" #include "ps2_io.h" #include "print.h" diff --git a/tmk_core/protocol/ps2_io_chibios.c b/platforms/chibios/drivers/ps2/ps2_io.c similarity index 100% rename from tmk_core/protocol/ps2_io_chibios.c rename to platforms/chibios/drivers/ps2/ps2_io.c diff --git a/tmk_core/protocol.mk b/tmk_core/protocol.mk index 30c87a0f12..8aa063c911 100644 --- a/tmk_core/protocol.mk +++ b/tmk_core/protocol.mk @@ -1,30 +1,5 @@ PROTOCOL_DIR = protocol -ifeq ($(strip $(PS2_MOUSE_ENABLE)), yes) - SRC += $(PROTOCOL_DIR)/ps2_mouse.c - OPT_DEFS += -DPS2_MOUSE_ENABLE - OPT_DEFS += -DMOUSE_ENABLE -endif - -ifeq ($(strip $(PS2_USE_BUSYWAIT)), yes) - SRC += protocol/ps2_busywait.c - SRC += protocol/ps2_io_avr.c - OPT_DEFS += -DPS2_USE_BUSYWAIT -endif - -ifeq ($(strip $(PS2_USE_INT)), yes) - SRC += protocol/ps2_interrupt.c - SRC += protocol/ps2_io_$(PLATFORM_KEY).c - OPT_DEFS += -DPS2_USE_INT -endif - -ifeq ($(strip $(PS2_USE_USART)), yes) - SRC += protocol/ps2_usart.c - SRC += protocol/ps2_io_$(PLATFORM_KEY).c - OPT_DEFS += -DPS2_USE_USART -endif - - ifeq ($(strip $(SERIAL_MOUSE_MICROSOFT_ENABLE)), yes) SRC += $(PROTOCOL_DIR)/serial_mouse_microsoft.c OPT_DEFS += -DSERIAL_MOUSE_ENABLE -DSERIAL_MOUSE_MICROSOFT \ From 1816006121de991581d50d0bc6b5a653e2b3ccd2 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Wed, 20 Oct 2021 21:27:46 +0100 Subject: [PATCH 315/595] Tidy up LCD_ENABLE/visualizer references (#14855) * Tidy up LCD_ENABLE/visualizer references * Fix up my (333fred) ergodox keymap with new LCD driver Co-authored-by: Fredric Silberberg --- common_features.mk | 4 - .../keymaps/dudeofawesome/config.h | 2 - .../keymaps/dudeofawesome/keymap.c | 4 +- .../keymaps/dudeofawesome/simple_visualizer.h | 123 ------ .../keymaps/dudeofawesome/visualizer.c | 79 ---- .../keymaps/dudeofawesome/visualizer.h | 35 -- .../keymaps/halfkeyboard/visualizer.c | 384 ------------------ .../keymaps/halfkeyboard/visualizer.h | 125 ------ layouts/community/ergodox/333fred/keymap.c | 40 ++ layouts/community/ergodox/333fred/rules.mk | 3 - .../community/ergodox/333fred/visualizer.c | 39 -- .../community/ergodox/adnw_p_u_q/visualizer.c | 34 -- layouts/community/ergodox/belak/keymap.c | 35 +- layouts/community/ergodox/belak/visualizer.c | 49 --- .../ergodox/choromanski/visualizer.c | 62 --- .../ergodox/drashna/visualizer.c_old | 77 ---- .../community/ergodox/osx_neo2/visualizer.c | 47 --- show_options.mk | 1 - users/talljoe/visualizer.c | 21 - 19 files changed, 57 insertions(+), 1107 deletions(-) delete mode 100644 keyboards/ergodox_infinity/keymaps/dudeofawesome/simple_visualizer.h delete mode 100644 keyboards/ergodox_infinity/keymaps/dudeofawesome/visualizer.c delete mode 100644 keyboards/ergodox_infinity/keymaps/dudeofawesome/visualizer.h delete mode 100644 keyboards/ergodox_infinity/keymaps/halfkeyboard/visualizer.c delete mode 100644 keyboards/ergodox_infinity/keymaps/halfkeyboard/visualizer.h delete mode 100644 layouts/community/ergodox/333fred/visualizer.c delete mode 100644 layouts/community/ergodox/adnw_p_u_q/visualizer.c delete mode 100644 layouts/community/ergodox/belak/visualizer.c delete mode 100644 layouts/community/ergodox/choromanski/visualizer.c delete mode 100644 layouts/community/ergodox/drashna/visualizer.c_old delete mode 100644 layouts/community/ergodox/osx_neo2/visualizer.c delete mode 100644 users/talljoe/visualizer.c diff --git a/common_features.mk b/common_features.mk index 083aa4aaa4..af538b696f 100644 --- a/common_features.mk +++ b/common_features.mk @@ -326,10 +326,6 @@ ifneq ($(strip $(VARIABLE_TRACE)),no) endif endif -ifeq ($(strip $(LCD_ENABLE)), yes) - CIE1931_CURVE := yes -endif - VALID_BACKLIGHT_TYPES := pwm timer software custom BACKLIGHT_ENABLE ?= no diff --git a/keyboards/ergodox_infinity/keymaps/dudeofawesome/config.h b/keyboards/ergodox_infinity/keymaps/dudeofawesome/config.h index 161958233e..9dcf8a7f43 100644 --- a/keyboards/ergodox_infinity/keymaps/dudeofawesome/config.h +++ b/keyboards/ergodox_infinity/keymaps/dudeofawesome/config.h @@ -6,6 +6,4 @@ #include "../../config.h" #include "dudeofawesome.h" -#include "./visualizer.h" - #endif diff --git a/keyboards/ergodox_infinity/keymaps/dudeofawesome/keymap.c b/keyboards/ergodox_infinity/keymaps/dudeofawesome/keymap.c index c3ea48654d..675b56edec 100644 --- a/keyboards/ergodox_infinity/keymaps/dudeofawesome/keymap.c +++ b/keyboards/ergodox_infinity/keymaps/dudeofawesome/keymap.c @@ -471,8 +471,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; void matrix_init_user() { - backlight_enable(); - backlight_level(BACKLIGHT_LEVELS); + led_matrix_enable_noeeprom(); + led_matrix_set_val_noeeprom(UINT8_MAX); } bool process_record_user(uint16_t keycode, keyrecord_t *record) { diff --git a/keyboards/ergodox_infinity/keymaps/dudeofawesome/simple_visualizer.h b/keyboards/ergodox_infinity/keymaps/dudeofawesome/simple_visualizer.h deleted file mode 100644 index 9213e99f42..0000000000 --- a/keyboards/ergodox_infinity/keymaps/dudeofawesome/simple_visualizer.h +++ /dev/null @@ -1,123 +0,0 @@ -/* Copyright 2017 Fred Sundvik - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#ifndef KEYBOARDS_ERGODOX_INFINITY_SIMPLE_VISUALIZER_H_ -#define KEYBOARDS_ERGODOX_INFINITY_SIMPLE_VISUALIZER_H_ - -// Currently we are assuming that both the backlight and LCD are enabled -// But it's entirely possible to write a custom visualizer that use only -// one of them -#ifndef LCD_BACKLIGHT_ENABLE -#error This visualizer needs that LCD backlight is enabled -#endif - -#ifndef LCD_ENABLE -#error This visualizer needs that LCD is enabled -#endif - -#include "visualizer.h" -#include "visualizer_keyframes.h" -#include "lcd_keyframes.h" -#include "lcd_backlight_keyframes.h" -#include "system/serial_link.h" -#include "led.h" -#include "default_animations.h" - -static const uint32_t logo_background_color = LCD_COLOR(0x00, 0x00, 0xFF); -static const uint32_t initial_color = LCD_COLOR(0, 0, 0); - -static bool initial_update = true; - -// Feel free to modify the animations below, or even add new ones if needed - -static keyframe_animation_t lcd_layer_display = { - .num_frames = 1, - .loop = false, - .frame_lengths = {gfxMillisecondsToTicks(0)}, - .frame_functions = {lcd_keyframe_display_layer_and_led_states} -}; - -// The color animation animates the LCD color when you change layers -static keyframe_animation_t color_animation = { - .num_frames = 2, - .loop = false, - // Note that there's a 200 ms no-operation frame, - // this prevents the color from changing when activating the layer - // momentarily - .frame_lengths = {gfxMillisecondsToTicks(1), gfxMillisecondsToTicks(5)}, - .frame_functions = {keyframe_no_operation, lcd_backlight_keyframe_animate_color}, -}; - -void initialize_user_visualizer(visualizer_state_t* state) { - // The brightness will be dynamically adjustable in the future - // But for now, change it here. - lcd_backlight_brightness(130); - state->current_lcd_color = initial_color; - state->target_lcd_color = logo_background_color; - initial_update = true; - start_keyframe_animation(&default_startup_animation); -} - - -// This function should be implemented by the keymap visualizer -// Don't change anything else than state->target_lcd_color and state->layer_text as that's the only thing -// that the simple_visualizer assumes that you are updating -// Also make sure that the buffer passed to state->layer_text remains valid until the previous animation is -// stopped. This can be done by either double buffering it or by using constant strings -static void get_visualizer_layer_and_color(visualizer_state_t* state); - -void update_user_visualizer_state(visualizer_state_t* state, visualizer_keyboard_status_t* prev_status) { - // Add more tests, change the colors and layer texts here - // Usually you want to check the high bits (higher layers first) - // because that's the order layers are processed for keypresses - // You can for check for example: - // state->status.layer - // state->status.default_layer - // state->status.leds (see led.h for available statuses) - - uint32_t prev_color = state->target_lcd_color; - const char* prev_layer_text = state->layer_text; - - get_visualizer_layer_and_color(state); - - if (initial_update || prev_color != state->target_lcd_color) { - start_keyframe_animation(&color_animation); - } - - if (initial_update || prev_layer_text != state->layer_text) { - start_keyframe_animation(&lcd_layer_display); - } - // You can also stop existing animations, and start your custom ones here - // remember that you should normally have only one animation for the LCD - // and one for the background. But you can also combine them if you want. -} - -void user_visualizer_suspend(visualizer_state_t* state) { - state->layer_text = "Suspending..."; - uint8_t hue = LCD_HUE(state->current_lcd_color); - uint8_t sat = LCD_SAT(state->current_lcd_color); - state->target_lcd_color = LCD_COLOR(hue, sat, 0); - start_keyframe_animation(&default_suspend_animation); -} - -void user_visualizer_resume(visualizer_state_t* state) { - state->current_lcd_color = initial_color; - state->target_lcd_color = logo_background_color; - initial_update = true; - start_keyframe_animation(&default_startup_animation); -} - -#endif /* KEYBOARDS_ERGODOX_INFINITY_SIMPLE_VISUALIZER_H_ */ diff --git a/keyboards/ergodox_infinity/keymaps/dudeofawesome/visualizer.c b/keyboards/ergodox_infinity/keymaps/dudeofawesome/visualizer.c deleted file mode 100644 index 54fc2363c7..0000000000 --- a/keyboards/ergodox_infinity/keymaps/dudeofawesome/visualizer.c +++ /dev/null @@ -1,79 +0,0 @@ -/* -Copyright 2017 Fred Sundvik - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include "./simple_visualizer.h" -#include "util.h" -#include "layers.h" - -// This function should be implemented by the keymap visualizer -// Don't change anything else than state->target_lcd_color and state->layer_text as that's the only thing -// that the simple_visualizer assumes that you are updating -// Also make sure that the buffer passed to state->layer_text remains valid until the previous animation is -// stopped. This can be done by either double buffering it or by using constant strings -static void get_visualizer_layer_and_color(visualizer_state_t* state) { - switch(biton32(default_layer_state)) { - case _QWERTY: - state->layer_text = "QWERTY"; - state->target_lcd_color = LCD_COLOR(0, 255, 128); - break; - case _WORKMAN: - state->layer_text = "Workman"; - state->target_lcd_color = LCD_COLOR(80, 255, 128); - break; - case _DVORAK: - state->layer_text = "Dvorak"; - state->target_lcd_color = LCD_COLOR(194, 255, 128); - break; - case _COLEMAK: - state->layer_text = "Colemak"; - state->target_lcd_color = LCD_COLOR(18, 255, 128); - break; - } - - switch(biton32(state->status.layer)) { - case _LOWER: - state->layer_text = "Lower"; - state->target_lcd_color = LCD_COLOR(141, 255, 255); - break; - case _RAISE: - state->layer_text = "Raise"; - state->target_lcd_color = LCD_COLOR(18, 255, 255); - break; - case _ADJUST: - state->layer_text = "Adjust"; - state->target_lcd_color = LCD_COLOR(194, 255, 255); - break; - case _NUM: - state->layer_text = "Numpad"; - state->target_lcd_color = LCD_COLOR(80, 255, 255); - break; - case _MOUSE: - state->layer_text = "Mouse"; - state->target_lcd_color = LCD_COLOR(300, 255, 255); - break; - case _GAME: - state->layer_text = "Game"; - state->target_lcd_color = LCD_COLOR(300, 255, 255); - break; - case _QWERTY: case _WORKMAN: case _DVORAK: case _COLEMAK: - break; - default: - state->layer_text = "NONE"; - state->target_lcd_color = LCD_COLOR(0, 255, 255); - break; - } -} diff --git a/keyboards/ergodox_infinity/keymaps/dudeofawesome/visualizer.h b/keyboards/ergodox_infinity/keymaps/dudeofawesome/visualizer.h deleted file mode 100644 index 740a951ec8..0000000000 --- a/keyboards/ergodox_infinity/keymaps/dudeofawesome/visualizer.h +++ /dev/null @@ -1,35 +0,0 @@ -/* Copyright 2017 Fred Sundvik - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#ifndef VISUALIZER_H_ -#define VISUALIZER_H_ - -#include "visualizer.h" -#include "led.h" - -void ergodox_led_lower_on (void); -void ergodox_led_raise_on (void); -void ergodox_led_adjust_on (void); - -void ergodox_led_lower_off (void); -void ergodox_led_raise_off (void); -void ergodox_led_adjust_off (void); - -void ergodox_led_lower_set (uint8_t n); -void ergodox_led_raise_set (uint8_t n); -void ergodox_led_adjust_set (uint8_t n); - -#endif /* VISUALIZER_H_ */ diff --git a/keyboards/ergodox_infinity/keymaps/halfkeyboard/visualizer.c b/keyboards/ergodox_infinity/keymaps/halfkeyboard/visualizer.c deleted file mode 100644 index 61a724c63f..0000000000 --- a/keyboards/ergodox_infinity/keymaps/halfkeyboard/visualizer.c +++ /dev/null @@ -1,384 +0,0 @@ -/* -Copyright 2017 Fred Sundvik -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include "visualizer.h" -#include "gfx.h" -#include "math.h" -#include "default_animations.h" -#include "led_backlight_keyframes.h" - -#define NUM_ROWS LED_HEIGHT -#define NUM_COLS LED_WIDTH - -#define ONESIDESCAN 10 -#define BOTHSIDESCAN 20 -#define FULL_ON LUMA2COLOR(255) -#define THREE_QUARTER LUMA2COLOR(200) -#define HALF_ON LUMA2COLOR(150) -#define ONE_QUARTER LUMA2COLOR(50) - -#define CROSSFADE_TIME 500 -#define GRADIENT_TIME 3000 -bool led_backlight_keyframe_one_period_sweep(keyframe_animation_t* animation, visualizer_state_t* state); -bool led_backlight_keyframe_half_period_sweep_to_on(keyframe_animation_t* animation, visualizer_state_t* state); -bool led_backlight_keyframe_half_period_sweep_to_off(keyframe_animation_t* animation, visualizer_state_t* state); -keyframe_animation_t Fade_in_all_leds = { - .num_frames = 1, - .loop = false, - .frame_lengths = { - CROSSFADE_TIME, - }, - .frame_functions = { - led_backlight_keyframe_fade_in_all, - }, -}; -keyframe_animation_t decreasing_gradient = { - .num_frames = 8, - .loop = true, - .frame_lengths = { - gfxMillisecondsToTicks(GRADIENT_TIME), // left to rigt (outside in) - 0, // mirror leds - gfxMillisecondsToTicks(GRADIENT_TIME), // left_to_right (mirrored, so inside out) - 0, // normal leds - gfxMillisecondsToTicks(GRADIENT_TIME), // left to rigt (outside in) - 0, // mirror leds - gfxMillisecondsToTicks(GRADIENT_TIME), // left_to_right (mirrored, so inside out) - 0, // normal leds - }, - .frame_functions = { - led_backlight_keyframe_one_period_sweep, - led_backlight_keyframe_mirror_orientation, - keyframe_no_operation, - keyframe_no_operation, - keyframe_no_operation, - keyframe_no_operation, - led_backlight_keyframe_one_period_sweep, - led_backlight_keyframe_normal_orientation, - - }, -}; - - - -static uint8_t off_on_off_gradient(float t, float index, float num) { - const float two_pi = M_PI * 2.0f; - float normalized_index = (1.0f - index / (num - 1.0f)) * two_pi; - float x = t * two_pi + normalized_index-M_PI; - if((1*M_PI) < x && x < (3*M_PI)) - { - float v = 0.5 * (cosf(x) + 1.0f); - return (uint8_t)(255.0f * v); - } - else - { - return 0; - } -} -static uint8_t off_on_gradient(float t, float index, float num) { - const float two_pi = M_PI * 2.0f; - float normalized_index = (1.0f - index / (num - 1.0f)) * two_pi; - float x = t * two_pi + normalized_index-M_PI; - float v; - if((1*M_PI) < x && x < (2*M_PI)) - { - v = 0.5 * (cosf(x) + 1.0f); - } - else if(x >= (2*M_PI)) - { - v = 1; - } - else - { - v = 0; - } - return (uint8_t)(255.0f * v); -} -static uint8_t on_off_gradient(float t, float index, float num) { - const float two_pi = M_PI * 2.0f; - float normalized_index = (1.0f - index / (num - 1.0f)) * two_pi; - float x = t * two_pi + normalized_index-M_PI; - float v; - if((2*M_PI) < x && x < (3*M_PI)) - { - v = 0.5 * (cosf(x) + 1.0f); - - } - else if(x >= (3*M_PI)) - { - v = 0; - } - else - { - v = 1; - } - return (uint8_t)(255.0f * v); -} - -bool led_backlight_keyframe_one_period_sweep(keyframe_animation_t* animation, visualizer_state_t* state) { - (void)state; - float frame_length = animation->frame_lengths[animation->current_frame]; - float current_pos = frame_length - animation->time_left_in_frame; - float t = current_pos / frame_length; - for (int i=0; i< NUM_COLS; i++) { - uint8_t color = off_on_off_gradient(t*2, i, NUM_COLS); - gdispGDrawLine(LED_DISPLAY, i, 0, i, NUM_ROWS - 1, LUMA2COLOR(color)); - } - return true; -} - -bool led_backlight_keyframe_half_period_sweep_to_on(keyframe_animation_t* animation, visualizer_state_t* state) { - (void)state; - float frame_length = animation->frame_lengths[animation->current_frame]; - float current_pos = frame_length - animation->time_left_in_frame; - float t = current_pos / frame_length; - for (int i=0; i< NUM_COLS; i++) { - uint8_t color = off_on_gradient(t*2, i, NUM_COLS); - gdispGDrawLine(LED_DISPLAY, i, 0, i, NUM_ROWS - 1, LUMA2COLOR(color)); - } - return true; -} -bool led_backlight_keyframe_half_period_sweep_to_off(keyframe_animation_t* animation, visualizer_state_t* state) { - (void)state; - float frame_length = animation->frame_lengths[animation->current_frame]; - float current_pos = frame_length - animation->time_left_in_frame; - float t = current_pos / frame_length; - for (int i=0; i< NUM_COLS; i++) { - uint8_t color = on_off_gradient(t*2, i, NUM_COLS); - gdispGDrawLine(LED_DISPLAY, i, 0, i, NUM_ROWS - 1, LUMA2COLOR(color)); - } - return true; -} - - -/* - +---+---+---+---+---+---+---+---+---+---+---+---+---+---+-------+ -| 0 | 1 | 2 | 3 | 4 | 5 | 6 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | phase | -+---+---+---+---+---+---+---+---+---+---+---+---+---+---+-------+ -| 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | -| 6 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | -| 5 | 6 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 2 | -| 4 | 5 | 6 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 3 | -| 3 | 4 | 5 | 6 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 4 | -| 2 | 3 | 4 | 5 | 6 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 5 | -| 1 | 2 | 3 | 4 | 5 | 6 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 6 | -| 0 | 1 | 2 | 3 | 4 | 5 | 6 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 7 | -| 0 | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 0 | 0 | 0 | 0 | 0 | 0 | 8 | -| 0 | 0 | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 0 | 0 | 0 | 0 | 0 | 9 | -| 0 | 0 | 0 | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 0 | 0 | 0 | 0 | 10 | -| 0 | 0 | 0 | 0 | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 0 | 0 | 0 | 11 | -| 0 | 0 | 0 | 0 | 0 | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 0 | 0 | 12 | -| 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 0 | 13 | -| 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 14 | -| 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 2 | 3 | 4 | 5 | 15 | -| 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 2 | 3 | 4 | 16 | -| 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 2 | 3 | 17 | -| 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 2 | 18 | -| 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 1 | 19 | -| 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 0 | 20 | -+---+---+---+---+---+---+---+---+---+---+---+---+---+---+-------+ -*/ - -#ifdef MASTER_IS_ON_RIGHT /*right side*/ -keyframe_animation_t sweep_on_sweep_off_left_and_right = { - .num_frames = 12, - .loop = true, - .frame_lengths = { - 0, - 1, - gfxMillisecondsToTicks(GRADIENT_TIME), // left on - gfxMillisecondsToTicks(GRADIENT_TIME), // right on - gfxMillisecondsToTicks(GRADIENT_TIME), // left off - gfxMillisecondsToTicks(GRADIENT_TIME), // right off - 0, // mirror leds - gfxMillisecondsToTicks(GRADIENT_TIME), // right on - gfxMillisecondsToTicks(GRADIENT_TIME), // left on - gfxMillisecondsToTicks(GRADIENT_TIME), // right off - gfxMillisecondsToTicks(GRADIENT_TIME), // left off - 0, // normal leds - }, - .frame_functions = { - led_backlight_keyframe_mirror_orientation, - led_backlight_keyframe_fade_out_all, - keyframe_no_operation, - led_backlight_keyframe_half_period_sweep_to_on, - keyframe_no_operation, - led_backlight_keyframe_half_period_sweep_to_off, - led_backlight_keyframe_normal_orientation, - led_backlight_keyframe_half_period_sweep_to_on, - keyframe_no_operation, - led_backlight_keyframe_half_period_sweep_to_off, - keyframe_no_operation, - led_backlight_keyframe_mirror_orientation, - - }, -}; -keyframe_animation_t both_sides_fade_across = { - .num_frames = 10, - .loop = true, - .frame_lengths = { - 0, - 1, - gfxMillisecondsToTicks(GRADIENT_TIME), // left to rigt (outside in) - 0, // mirror leds - gfxMillisecondsToTicks(GRADIENT_TIME), // left_to_right (mirrored, so inside out) - 0, // normal leds - gfxMillisecondsToTicks(GRADIENT_TIME), // left to rigt (outside in) - 0, // mirror leds - gfxMillisecondsToTicks(GRADIENT_TIME), // left_to_right (mirrored, so inside out) - 0, // normal leds - }, - .frame_functions = { - led_backlight_keyframe_mirror_orientation, - led_backlight_keyframe_fade_out_all, - keyframe_no_operation, - keyframe_no_operation, - led_backlight_keyframe_one_period_sweep, - led_backlight_keyframe_normal_orientation, - led_backlight_keyframe_one_period_sweep, - led_backlight_keyframe_mirror_orientation, - keyframe_no_operation, - keyframe_no_operation, - }, -}; - -#else /*left side*/ -keyframe_animation_t sweep_on_sweep_off_left_and_right = { - .num_frames = 10, - .loop = true, - .frame_lengths = { - gfxMillisecondsToTicks(GRADIENT_TIME), // left on - gfxMillisecondsToTicks(GRADIENT_TIME), // right on - gfxMillisecondsToTicks(GRADIENT_TIME), // left off - gfxMillisecondsToTicks(GRADIENT_TIME), // right off - 0, // mirror leds - gfxMillisecondsToTicks(GRADIENT_TIME), // right on - gfxMillisecondsToTicks(GRADIENT_TIME), // left on - gfxMillisecondsToTicks(GRADIENT_TIME), // right off - gfxMillisecondsToTicks(GRADIENT_TIME), // left off - 0, // normal leds - }, - .frame_functions = { - led_backlight_keyframe_half_period_sweep_to_on, - keyframe_no_operation, - led_backlight_keyframe_half_period_sweep_to_off, - keyframe_no_operation, - led_backlight_keyframe_mirror_orientation, - keyframe_no_operation, - led_backlight_keyframe_half_period_sweep_to_on, - keyframe_no_operation, - led_backlight_keyframe_half_period_sweep_to_off, - led_backlight_keyframe_normal_orientation, - - }, -}; -keyframe_animation_t both_sides_fade_across = { - .num_frames = 8, - .loop = true, - .frame_lengths = { - gfxMillisecondsToTicks(GRADIENT_TIME), // left to rigt (outside in) - 0, // mirror leds - gfxMillisecondsToTicks(GRADIENT_TIME), // left_to_right (mirrored, so inside out) - 0, // normal leds - gfxMillisecondsToTicks(GRADIENT_TIME), // left to rigt (outside in) - 0, // mirror leds - gfxMillisecondsToTicks(GRADIENT_TIME), // left_to_right (mirrored, so inside out) - 0, // normal leds - }, - .frame_functions = { - led_backlight_keyframe_one_period_sweep, - led_backlight_keyframe_mirror_orientation, - keyframe_no_operation, - keyframe_no_operation, - keyframe_no_operation, - keyframe_no_operation, - led_backlight_keyframe_one_period_sweep, - led_backlight_keyframe_normal_orientation, - - }, -}; - - -#endif - -#define RED 0 -#define ORANGE 21 -#define YELLOW 42 -#define SPRING_GREEN 64 -#define GREEN 85 -#define TURQUOISE 107 -#define CYAN 127 -#define OCEAN 149 -#define BLUE 170 -#define VIOLET 192 -#define MAGENTA 212 -#define RASPBERRY 234 - -// This function should be implemented by the keymap visualizer -// Don't change anything else than state->target_lcd_color and state->layer_text as that's the only thing -// that the simple_visualizer assumes that you are updating -// Also make sure that the buffer passed to state->layer_text remains valid until the previous animation is -// stopped. This can be done by either double buffering it or by using constant strings -static void get_visualizer_layer_and_color(visualizer_state_t* state) { - uint8_t saturation = 255; - /* if (state->status.leds & (1u << USB_LED_CAPS_LOCK)) { - saturation = 255; - } */ - - if (state->status.layer & 0x400) { - state->target_lcd_color = LCD_COLOR(OCEAN, saturation, 0xFF); - state->layer_text = "STENOGRAPHY"; - } - else if (state->status.layer & 0x200) { - state->target_lcd_color = LCD_COLOR(GREEN, saturation, 0xFF); - state->layer_text = "FUNCTION"; - } - else if (state->status.layer & 0x100) { - state->target_lcd_color = LCD_COLOR(MAGENTA, saturation, 0xFF); - state->layer_text = "Shortcuts Layer"; - stop_keyframe_animation(&sweep_on_sweep_off_left_and_right); - start_keyframe_animation(&led_test_animation); - } - else if (state->status.layer & 0x80) { - state->target_lcd_color = LCD_COLOR(VIOLET, saturation, 0xFF); - state->layer_text = "Plover"; - } - else if (state->status.layer & 0x40) { - state->target_lcd_color = LCD_COLOR(RASPBERRY, saturation, 0xFF); - state->layer_text = "Mirrored Symbols"; - } - else if (state->status.layer & 0x20) { - state->target_lcd_color = LCD_COLOR(RED, saturation, 0xFF); - state->layer_text = "Symbols"; - } - else if (state->status.layer & 0x8) { - state->target_lcd_color = LCD_COLOR(OCEAN, saturation, 0xFF); - state->layer_text = "Mirrored Dvorak"; - } - else if (state->status.layer & 0x4) { - state->target_lcd_color = LCD_COLOR(BLUE, saturation, 0xFF); - state->layer_text = "Dvorak"; - stop_keyframe_animation(&led_test_animation); - start_keyframe_animation(&sweep_on_sweep_off_left_and_right); - } - else if (state->status.layer & 0x2) { - state->target_lcd_color = LCD_COLOR(ORANGE, saturation, 0xFF); - state->layer_text = "Mirrored Qwerty"; - } - else { - state->target_lcd_color = LCD_COLOR(YELLOW, saturation, 0xFF); - state->layer_text = "Qwerty"; - stop_keyframe_animation(&led_test_animation); - start_keyframe_animation(&Fade_in_all_leds); - } -} diff --git a/keyboards/ergodox_infinity/keymaps/halfkeyboard/visualizer.h b/keyboards/ergodox_infinity/keymaps/halfkeyboard/visualizer.h deleted file mode 100644 index c97a7a22a5..0000000000 --- a/keyboards/ergodox_infinity/keymaps/halfkeyboard/visualizer.h +++ /dev/null @@ -1,125 +0,0 @@ -/* Copyright 2017 Fred Sundvik - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#ifndef VISUALIZER_H_ -#define VISUALIZER_H_ - -// Currently we are assuming that both the backlight and LCD are enabled -// But it's entirely possible to write a custom visualizer that use only -// one of them -#ifndef LCD_BACKLIGHT_ENABLE -#error This visualizer needs that LCD backlight is enabled -#endif - -#ifndef LCD_ENABLE -#error This visualizer needs that LCD is enabled -#endif - -#include "visualizer.h" -#include "visualizer_keyframes.h" -#include "lcd_keyframes.h" -#include "lcd_backlight_keyframes.h" -#include "system/serial_link.h" -#include "led.h" -#include "default_animations.h" - -static const uint32_t logo_background_color = LCD_COLOR(0x00, 0x00, 0xFF); -static const uint32_t initial_color = LCD_COLOR(0, 0, 0); - -static bool initial_update = true; - -// Feel free to modify the animations below, or even add new ones if needed -extern keyframe_animation_t KITT_Scanner_animation; - -static keyframe_animation_t lcd_layer_display = { - .num_frames = 1, - .loop = false, - .frame_lengths = {gfxMillisecondsToTicks(0)}, - .frame_functions = {lcd_keyframe_display_layer_and_led_states} -}; - -// The color animation animates the LCD color when you change layers -static keyframe_animation_t color_animation = { - .num_frames = 2, - .loop = false, - // Note that there's a 200 ms no-operation frame, - // this prevents the color from changing when activating the layer - // momentarily - .frame_lengths = {gfxMillisecondsToTicks(200), gfxMillisecondsToTicks(500)}, - .frame_functions = {keyframe_no_operation, lcd_backlight_keyframe_animate_color}, -}; - -void initialize_user_visualizer(visualizer_state_t* state) { - // The brightness will be dynamically adjustable in the future - // But for now, change it here. - lcd_backlight_brightness(130); - state->current_lcd_color = initial_color; - state->target_lcd_color = logo_background_color; - initial_update = true; - start_keyframe_animation(&default_startup_animation); -} - - -// This function should be implemented by the keymap visualizer -// Don't change anything else than state->target_lcd_color and state->layer_text as that's the only thing -// that the simple_visualizer assumes that you are updating -// Also make sure that the buffer passed to state->layer_text remains valid until the previous animation is -// stopped. This can be done by either double buffering it or by using constant strings -static void get_visualizer_layer_and_color(visualizer_state_t* state); - -void update_user_visualizer_state(visualizer_state_t* state, visualizer_keyboard_status_t* prev_status) { - // Add more tests, change the colors and layer texts here - // Usually you want to check the high bits (higher layers first) - // because that's the order layers are processed for keypresses - // You can for check for example: - // state->status.layer - // state->status.default_layer - // state->status.leds (see led.h for available statuses) - - uint32_t prev_color = state->target_lcd_color; - const char* prev_layer_text = state->layer_text; - - get_visualizer_layer_and_color(state); - - if (initial_update || prev_color != state->target_lcd_color) { - start_keyframe_animation(&color_animation); - } - - if (initial_update || prev_layer_text != state->layer_text) { - start_keyframe_animation(&lcd_layer_display); - } - // You can also stop existing animations, and start your custom ones here - // remember that you should normally have only one animation for the LCD - // and one for the background. But you can also combine them if you want. - -} - -void user_visualizer_suspend(visualizer_state_t* state) { - state->layer_text = "Suspending..."; - uint8_t hue = LCD_HUE(state->current_lcd_color); - uint8_t sat = LCD_SAT(state->current_lcd_color); - state->target_lcd_color = LCD_COLOR(hue, sat, 0); - start_keyframe_animation(&default_suspend_animation); -} - -void user_visualizer_resume(visualizer_state_t* state) { - state->current_lcd_color = initial_color; - state->target_lcd_color = logo_background_color; - initial_update = true; - start_keyframe_animation(&default_startup_animation); -} - -#endif /* VISUALIZER_H_ */ diff --git a/layouts/community/ergodox/333fred/keymap.c b/layouts/community/ergodox/333fred/keymap.c index b9aefd9293..5dee9a1e3f 100644 --- a/layouts/community/ergodox/333fred/keymap.c +++ b/layouts/community/ergodox/333fred/keymap.c @@ -272,3 +272,43 @@ void matrix_scan_user(void) { ergodox_led_all_on(); } +#ifdef ST7565_ENABLE + +void st7565_task_user(void) { + // The colors will need to be ported over to the quantum painter API when + // https://github.com/qmk/qmk_firmware/pull/10174 is merged. + + st7565_clear(); + switch (get_highest_layer(layer_state)) { + case BASE: + //state->target_lcd_color = LCD_COLOR(84, saturation, 0xFF); + st7565_write_P(PSTR("Default\n"), false); + break; + case CODEFLOW: + //state->target_lcd_color = LCD_COLOR(216, 90, 0xFF); + st7565_write_P(PSTR("Code\n"), false); + break; + case SYMB: + //state->target_lcd_color = LCD_COLOR(168, saturation, 0xFF); + st7565_write_P(PSTR("Symbol\n"), false); + break; + case MDIA: + //state->target_lcd_color = LCD_COLOR(0, saturation, 0xFF); + st7565_write_P(PSTR("Media\n"), false); + break; + case VIM: + //state->target_lcd_color = LCD_COLOR(140, 100, 60); + st7565_write_P(PSTR("Movement\n"), false); + break; + case GAME: + //state->target_lcd_color = LCD_COLOR(0, 255, 60); + st7565_write_P(PSTR("Game\n"), false); + break; + case GAME_ARROW: + //state->target_lcd_color = LCD_COLOR(0, 255, 60); + st7565_write_P(PSTR("Game Arrow\n"), false); + break; + } +} + +#endif diff --git a/layouts/community/ergodox/333fred/rules.mk b/layouts/community/ergodox/333fred/rules.mk index f6c71feb46..9a3e2b97e5 100644 --- a/layouts/community/ergodox/333fred/rules.mk +++ b/layouts/community/ergodox/333fred/rules.mk @@ -1,5 +1,2 @@ -LCD_BACKLIGHT_ENABLE = yes -LCD_ENABLE = yes -BACKLIGHT_ENABLE = yes KEY_LOCK_ENABLE = yes CONSOLE_ENABLE = no diff --git a/layouts/community/ergodox/333fred/visualizer.c b/layouts/community/ergodox/333fred/visualizer.c deleted file mode 100644 index d13b3cd794..0000000000 --- a/layouts/community/ergodox/333fred/visualizer.c +++ /dev/null @@ -1,39 +0,0 @@ -/* -Note: this is a modified copy of ../default/visualizer.c, originally licensed GPL. -*/ - -#include "simple_visualizer.h" - -// This function should be implemented by the keymap visualizer -// Don't change anything else than state->target_lcd_color and state->layer_text as that's the only thing -// that the simple_visualizer assumes that you are updating -// Also make sure that the buffer passed to state->layer_text remains valid until the previous animation is -// stopped. This can be done by either double buffering it or by using constant strings -static void get_visualizer_layer_and_color(visualizer_state_t* state) { - uint8_t saturation = 60; - if (state->status.leds & (1u << USB_LED_CAPS_LOCK)) { - saturation = 255; - } - if (state->status.layer & 0x80) { - state->target_lcd_color = LCD_COLOR(0, 255, 60); - state->layer_text = "Game Arrow"; - } else if (state->status.layer & 0x40) { - state->target_lcd_color = LCD_COLOR(0, 255, 60); - state->layer_text = "Game"; - } else if (state->status.layer & 0x20) { - state->target_lcd_color = LCD_COLOR(140, 100, 60); - state->layer_text = "Movement"; - } else if (state->status.layer & 0x10) { - state->target_lcd_color = LCD_COLOR(0, saturation, 0xFF); - state->layer_text = "Media"; - } else if (state->status.layer & 0x8) { - state->target_lcd_color = LCD_COLOR(168, saturation, 0xFF); - state->layer_text = "Symbol"; - } else if (state->status.layer & 0x2 || state->status.layer & 0x4) { - state->target_lcd_color = LCD_COLOR(216, 90, 0xFF); - state->layer_text = "Code"; - } else { - state->target_lcd_color = LCD_COLOR(84, saturation, 0xFF); - state->layer_text = "Default"; - } -} diff --git a/layouts/community/ergodox/adnw_p_u_q/visualizer.c b/layouts/community/ergodox/adnw_p_u_q/visualizer.c deleted file mode 100644 index 9a4d485387..0000000000 --- a/layouts/community/ergodox/adnw_p_u_q/visualizer.c +++ /dev/null @@ -1,34 +0,0 @@ -/* -Note: this is a modified copy of ../default/visualizer.c, originally licensed GPL. -*/ - -#include "simple_visualizer.h" - -// This function should be implemented by the keymap visualizer -// Don't change anything else than state->target_lcd_color and state->layer_text as that's the only thing -// that the simple_visualizer assumes that you are updating -// Also make sure that the buffer passed to state->layer_text remains valid until the previous animation is -// stopped. This can be done by either double buffering it or by using constant strings -static void get_visualizer_layer_and_color(visualizer_state_t* state) { - - if (state->status.layer & 0x20) { - state->target_lcd_color = LCD_COLOR(127, 0xFF, 0xFF); - state->layer_text = "Mouse"; - } else if (state->status.layer & 0x10) { - state->target_lcd_color = LCD_COLOR(85, 0xFF, 0xFF); - state->layer_text = "Symbol"; - } else if (state->status.layer & 0x8) { - state->target_lcd_color = LCD_COLOR(64, 0xFF, 0xFF); - state->layer_text = "Brackets"; - } else if (state->status.layer & 0x4) { - state->target_lcd_color = LCD_COLOR(42, 0xFF, 0xFF); - state->layer_text = "Diak"; - } else if (state->status.layer & 0x2) { - state->target_lcd_color = LCD_COLOR(21, 0xFF, 0xFF); - state->layer_text = "Terminal"; - } else { - state->target_lcd_color = LCD_COLOR(192, 0xFF, 0xFF); - state->layer_text = "Vim"; - } -} - diff --git a/layouts/community/ergodox/belak/keymap.c b/layouts/community/ergodox/belak/keymap.c index bca0dec913..de0fe1b1ae 100644 --- a/layouts/community/ergodox/belak/keymap.c +++ b/layouts/community/ergodox/belak/keymap.c @@ -33,11 +33,6 @@ enum belak_keycodes { E_TSET, }; -inline void tap(uint16_t keycode) { - register_code(keycode); - unregister_code(keycode); -}; - // TODO: Add LED support to the tap dance by using the advanced macro #define LTOGGLE TD(TD_LAYER_TOGGLE) @@ -273,17 +268,17 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { case E_SHRUG: // ¯\_(ツ)_/¯ if (record->event.pressed) { process_unicode((0x00AF|QK_UNICODE), record); // Hand - tap(KC_BSLS); // Arm + tap_code16(KC_BSLS); // Arm register_code(KC_RSFT); - tap(KC_UNDS); // Arm - tap(KC_LPRN); // Head + tap_code16(KC_UNDS); // Arm + tap_code16(KC_LPRN); // Head unregister_code(KC_RSFT); process_unicode((0x30C4|QK_UNICODE), record); // Face register_code(KC_RSFT); - tap(KC_RPRN); // Head - tap(KC_UNDS); // Arm + tap_code16(KC_RPRN); // Head + tap_code16(KC_UNDS); // Arm unregister_code(KC_RSFT); - tap(KC_SLSH); // Arm + tap_code16(KC_SLSH); // Arm process_unicode((0x00AF|QK_UNICODE), record); // Hand } return false; @@ -291,19 +286,19 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { case E_TFLIP: // (╯°□°)╯ ︵ ┻━┻ if (record->event.pressed) { register_code(KC_RSFT); - tap(KC_9); + tap_code16(KC_9); unregister_code(KC_RSFT); process_unicode((0x256F|QK_UNICODE), record); // Arm process_unicode((0x00B0|QK_UNICODE), record); // Eye process_unicode((0x25A1|QK_UNICODE), record); // Mouth process_unicode((0x00B0|QK_UNICODE), record); // Eye register_code(KC_RSFT); - tap(KC_0); + tap_code16(KC_0); unregister_code(KC_RSFT); process_unicode((0x256F|QK_UNICODE), record); // Arm - tap(KC_SPC); + tap_code16(KC_SPC); process_unicode((0x0361|QK_UNICODE), record); // Flippy - tap(KC_SPC); + tap_code16(KC_SPC); process_unicode((0x253B|QK_UNICODE), record); // Table process_unicode((0x2501|QK_UNICODE), record); // Table process_unicode((0x253B|QK_UNICODE), record); // Table @@ -316,18 +311,18 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { process_unicode((0x2500|QK_UNICODE), record); // Table process_unicode((0x2500|QK_UNICODE), record); // Table process_unicode((0x252C|QK_UNICODE), record); // Table - tap(KC_SPC); + tap_code16(KC_SPC); process_unicode((0x30CE|QK_UNICODE), record); // Arm register_code(KC_RSFT); - tap(KC_9); + tap_code16(KC_9); unregister_code(KC_RSFT); - tap(KC_SPC); + tap_code16(KC_SPC); process_unicode((0x309C|QK_UNICODE), record); // Eye - tap(KC_MINS); + tap_code16(KC_MINS); process_unicode((0x309C|QK_UNICODE), record); // Eye process_unicode((0x30CE|QK_UNICODE), record); // Arm register_code(KC_RSFT); - tap(KC_0); + tap_code16(KC_0); unregister_code(KC_RSFT); } return false; diff --git a/layouts/community/ergodox/belak/visualizer.c b/layouts/community/ergodox/belak/visualizer.c deleted file mode 100644 index b92890a668..0000000000 --- a/layouts/community/ergodox/belak/visualizer.c +++ /dev/null @@ -1,49 +0,0 @@ -/* -Copyright 2017 Fred Sundvik - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -// Currently we are assuming that both the backlight and LCD are enabled -// But it's entirely possible to write a custom visualizer that use only -// one of them -#ifndef LCD_BACKLIGHT_ENABLE -#error This visualizer needs that LCD backlight is enabled -#endif - -#ifndef LCD_ENABLE -#error This visualizer needs that LCD is enabled -#endif - -#include "simple_visualizer.h" - -static void get_visualizer_layer_and_color(visualizer_state_t* state) { - uint8_t saturation = 60; - if (state->status.leds & (1u << USB_LED_CAPS_LOCK)) { - saturation = 255; - } - - if (state->status.layer & 0x4) { - state->target_lcd_color = LCD_COLOR(0, saturation, 0xFF); - state->layer_text = "Media"; - } - else if (state->status.layer & 0x2) { - state->target_lcd_color = LCD_COLOR(168, saturation, 0xFF); - state->layer_text = "Symbols"; - } - else { - state->target_lcd_color = LCD_COLOR(84, saturation, 0xFF); - state->layer_text = "Base"; - } -} diff --git a/layouts/community/ergodox/choromanski/visualizer.c b/layouts/community/ergodox/choromanski/visualizer.c deleted file mode 100644 index e207c66822..0000000000 --- a/layouts/community/ergodox/choromanski/visualizer.c +++ /dev/null @@ -1,62 +0,0 @@ -/* -Copyright 2017 Fred Sundvik - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include "simple_visualizer.h" - -// This function should be implemented by the keymap visualizer -// Don't change anything else than state->target_lcd_color and state->layer_text as that's the only thing -// that the simple_visualizer assumes that you are updating -// Also make sure that the buffer passed to state->layer_text remains valid until the previous animation is -// stopped. This can be done by either double buffering it or by using constant strings -static void get_visualizer_layer_and_color(visualizer_state_t* state) { - - if (state->status.layer & 0x20) { - //GREEN - state->target_lcd_color = LCD_COLOR(85, 255, 128); - state->layer_text = "Gaming"; - } - else if (state->status.layer & 0x10) { - //ORANGE - state->target_lcd_color = LCD_COLOR(28, 255, 230); - state->layer_text = "Numpad & Mouse"; - } - else if (state->status.layer & 0x8) { - //YELLOW - state->target_lcd_color = LCD_COLOR(38, 255, 230); - state->layer_text = "Symbols"; - } - else if (state->status.layer & 0x4) { - //RED - state->target_lcd_color = LCD_COLOR(0, 255, 95); - if (state->status.layer & 0x2){ - state->layer_text = "Qwerty - Fn"; - }else{ - state->layer_text = "Colemak - Fn"; - } - } - else if (state->status.layer & 0x2) { - //BLUE - state->target_lcd_color = LCD_COLOR(149, 255, 192); - state->layer_text = "Qwerty"; - } - else { - //PURPLE - state->target_lcd_color = LCD_COLOR(200, 255, 192); - state->layer_text = "Colemak"; - } -} - diff --git a/layouts/community/ergodox/drashna/visualizer.c_old b/layouts/community/ergodox/drashna/visualizer.c_old deleted file mode 100644 index 6b1c3ff498..0000000000 --- a/layouts/community/ergodox/drashna/visualizer.c_old +++ /dev/null @@ -1,77 +0,0 @@ -/* -Copyright 2017 Fred Sundvik - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include "./simple_visualizer.h" -#include "util.h" -#include "drashna.h" -#include "rgblight_list.h" - -#define LCD_COLOR_wrapper(...) LCD_COLOR(__VA_ARGS__) -// This function should be implemented by the keymap visualizer -// Don't change anything else than state->target_lcd_color and state->layer_text as that's the only thing -// that the simple_visualizer assumes that you are updating -// Also make sure that the buffer passed to state->layer_text remains valid until the previous animation is -// stopped. This can be done by either double buffering it or by using constant strings -static void get_visualizer_layer_and_color(visualizer_state_t* state) { - - switch(get_highest_layer(state->status.layer|default_layer_state)) { - case _LOWER: - state->layer_text = "Lower"; - state->target_lcd_color = LCD_COLOR_wrapper(HSV_GREEN); - break; - case _RAISE: - state->layer_text = "Raise"; - state->target_lcd_color = LCD_COLOR_wrapper(HSV_YELLOW); - break; - case _ADJUST: - state->layer_text = "Adjust"; - state->target_lcd_color = LCD_COLOR_wrapper(HSV_RED); - break; - case _MACROS: - state->layer_text = "Macros"; - state->target_lcd_color = LCD_COLOR_wrapper(HSV_ORANGE); - break; - case _MEDIA: - state->layer_text = "Media"; - state->target_lcd_color = LCD_COLOR_wrapper(HSV_CHARTREUSE); - break; - case _GAMEPAD: - state->layer_text = "Game"; - state->target_lcd_color = LCD_COLOR_wrapper(HSV_ORANGE); - break; - case _QWERTY: - state->layer_text = "QWERTY"; - state->target_lcd_color = LCD_COLOR_wrapper(HSV_CYAN); - break; - case _WORKMAN: - state->layer_text = "Workman"; - state->target_lcd_color = LCD_COLOR_wrapper(HSV_GOLDENROD); - break; - case _DVORAK: - state->layer_text = "Dvorak"; - state->target_lcd_color = LCD_COLOR_wrapper(HSV_SPRINGGREEN); - break; - case _COLEMAK: - state->layer_text = "Colemak"; - state->target_lcd_color = LCD_COLOR_wrapper(HSV_MAGENTA); - break; break; - default: - state->layer_text = "NONE"; - state->target_lcd_color = LCD_COLOR_wrapper(HSV_RED); - break; - } -} diff --git a/layouts/community/ergodox/osx_neo2/visualizer.c b/layouts/community/ergodox/osx_neo2/visualizer.c deleted file mode 100644 index 653201bb8a..0000000000 --- a/layouts/community/ergodox/osx_neo2/visualizer.c +++ /dev/null @@ -1,47 +0,0 @@ -#include "layers.h" -#include "simple_visualizer.h" -#include "util.h" - -static void get_visualizer_layer_and_color(visualizer_state_t *state) { - uint8_t layer = biton32(state->status.layer); - - // Go from highest to lowest layer to get the right text/color combination. - switch (layer) { - // #AEB2F4 / hsv(65.71%, 28.69%, 95.69%) - case FKEYS: - // #F4AEDC / hsv(89.05%, 28.69%, 95.69%) - state->layer_text = "FUNCTION KEYS"; - state->target_lcd_color = LCD_COLOR(228, 73, 245); - break; - case US_1: - // #F4B993 / hsv(6.53%, 39.75%, 95.69%) - state->layer_text = "QWERTY"; - state->target_lcd_color = LCD_COLOR(17, 102, 245); - break; - case NEO_6: - // #F4E393 / hsv(13.75%, 39.75%, 95.69%) - state->layer_text = "NEO: 6"; - state->target_lcd_color = LCD_COLOR(35, 102, 245); - break; - case NEO_5: - // #C6F493 / hsv(24.57%, 39.75%, 95.69%) - state->layer_text = "NEO: 5"; - state->target_lcd_color = LCD_COLOR(63, 102, 245); - break; - case NEO_4: - // #8EEBC9 / hsv(43.91%, 39.57%, 92.16%) - state->layer_text = "NEO: 4"; - state->target_lcd_color = LCD_COLOR(112, 101, 189); - break; - case NEO_3: - // #93D2F4 / hsv(55.84%, 39.75%, 95.69%) - state->layer_text = "NEO: 3"; - state->target_lcd_color = LCD_COLOR(143, 102, 245); - break; - default: - // #EEEEEE / hsv(0%, 0%, 93%) - state->layer_text = "NEO: 1"; - state->target_lcd_color = LCD_COLOR(0, 0, 255); - break; - } -} diff --git a/show_options.mk b/show_options.mk index e0d7c9b072..c1da90bcbc 100644 --- a/show_options.mk +++ b/show_options.mk @@ -28,7 +28,6 @@ HARDWARE_OPTION_NAMES = \ AUDIO_ENABLE \ HD44780_ENABLE \ ENCODER_ENABLE \ - LCD_ENABLE \ LED_TABLES \ POINTING_DEVICE_ENABLE \ DIP_SWITCH_ENABLE diff --git a/users/talljoe/visualizer.c b/users/talljoe/visualizer.c deleted file mode 100644 index c17b56706b..0000000000 --- a/users/talljoe/visualizer.c +++ /dev/null @@ -1,21 +0,0 @@ -/* Copyright 2020 Joseph Wasson - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include "talljoe.h" - -static void get_visualizer_layer_and_color(visualizer_state_t* state) { - state->status_text = layer_names[biton32(state->status.layer)]; -} From b36e0c66581b5ec0e3aff5212857e9694115e66c Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Thu, 21 Oct 2021 14:39:13 +0100 Subject: [PATCH 316/595] Move USE_CCACHE logic to common location (#14899) --- tmk_core/arm_atsam.mk | 2 +- tmk_core/avr.mk | 2 +- tmk_core/chibios.mk | 6 ------ tmk_core/native.mk | 2 +- tmk_core/rules.mk | 7 +++++-- 5 files changed, 8 insertions(+), 11 deletions(-) diff --git a/tmk_core/arm_atsam.mk b/tmk_core/arm_atsam.mk index b29de9132b..b49bf764d7 100644 --- a/tmk_core/arm_atsam.mk +++ b/tmk_core/arm_atsam.mk @@ -2,7 +2,7 @@ ############################################################################## # Compiler settings # -CC = arm-none-eabi-gcc +CC = $(CC_PREFIX) arm-none-eabi-gcc OBJCOPY = arm-none-eabi-objcopy OBJDUMP = arm-none-eabi-objdump SIZE = arm-none-eabi-size diff --git a/tmk_core/avr.mk b/tmk_core/avr.mk index 940e95397b..c52262273e 100644 --- a/tmk_core/avr.mk +++ b/tmk_core/avr.mk @@ -2,7 +2,7 @@ ############################################################################## # Compiler settings # -CC = avr-gcc +CC = $(CC_PREFIX) avr-gcc OBJCOPY = avr-objcopy OBJDUMP = avr-objdump SIZE = avr-size diff --git a/tmk_core/chibios.mk b/tmk_core/chibios.mk index c520d6025b..957a259229 100644 --- a/tmk_core/chibios.mk +++ b/tmk_core/chibios.mk @@ -398,12 +398,6 @@ OPT_DEFS += -DPROTOCOL_CHIBIOS # Workaround to stop ChibiOS from complaining about new GCC -- it's been fixed for 7/8/9 already OPT_DEFS += -DPORT_IGNORE_GCC_VERSION_CHECK=1 -# Speed up recompilations by opt-in usage of ccache -USE_CCACHE ?= no -ifneq ($(USE_CCACHE),no) - CC_PREFIX ?= ccache -endif - # Construct GCC toolchain CC = $(CC_PREFIX) $(TOOLCHAIN)gcc OBJCOPY = $(TOOLCHAIN)objcopy diff --git a/tmk_core/native.mk b/tmk_core/native.mk index f609fd0e6f..eb2424ec5c 100644 --- a/tmk_core/native.mk +++ b/tmk_core/native.mk @@ -1,7 +1,7 @@ SYSTEM_TYPE := $(shell gcc -dumpmachine) GCC_VERSION := $(shell gcc --version 2>/dev/null) -CC = gcc +CC = $(CC_PREFIX) gcc OBJCOPY = OBJDUMP = SIZE = diff --git a/tmk_core/rules.mk b/tmk_core/rules.mk index 5a629d1eb0..4c547cfd24 100644 --- a/tmk_core/rules.mk +++ b/tmk_core/rules.mk @@ -69,8 +69,11 @@ CSTANDARD = -std=gnu99 #CXXDEFS += -D__STDC_CONSTANT_MACROS #CXXDEFS += - - +# Speed up recompilations by opt-in usage of ccache +USE_CCACHE ?= yes +ifneq ($(USE_CCACHE),no) + CC_PREFIX ?= ccache +endif #---------------- Compiler Options C ---------------- # -g*: generate debugging information From 1b93d576f84822d0f4947179ee49f614ba345f12 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Fri, 22 Oct 2021 00:21:43 +0100 Subject: [PATCH 317/595] Fix ccache default (#14906) --- tmk_core/rules.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tmk_core/rules.mk b/tmk_core/rules.mk index 4c547cfd24..56a331e288 100644 --- a/tmk_core/rules.mk +++ b/tmk_core/rules.mk @@ -70,7 +70,7 @@ CSTANDARD = -std=gnu99 #CXXDEFS += # Speed up recompilations by opt-in usage of ccache -USE_CCACHE ?= yes +USE_CCACHE ?= no ifneq ($(USE_CCACHE),no) CC_PREFIX ?= ccache endif From 1b1f3ec68ee1e7abe436a46bcfedf30f21330aef Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Fri, 22 Oct 2021 00:49:38 +0100 Subject: [PATCH 318/595] Split out arm_atsam shift register logic (#14848) --- keyboards/massdrop/alt/config.h | 18 ++- keyboards/massdrop/ctrl/config.h | 18 ++- tmk_core/common/arm_atsam/gpio.h | 8 +- tmk_core/protocol/arm_atsam.mk | 3 +- .../protocol/arm_atsam/arm_atsam_protocol.h | 2 +- tmk_core/protocol/arm_atsam/shift_register.c | 118 ++++++++++++++++++ .../arm_atsam/{spi.h => shift_register.h} | 25 +--- tmk_core/protocol/arm_atsam/spi.c | 92 -------------- tmk_core/protocol/arm_atsam/spi_master.c | 109 ++++++++++++++++ tmk_core/protocol/arm_atsam/spi_master.h | 48 +++++++ 10 files changed, 301 insertions(+), 140 deletions(-) create mode 100644 tmk_core/protocol/arm_atsam/shift_register.c rename tmk_core/protocol/arm_atsam/{spi.h => shift_register.h} (77%) delete mode 100644 tmk_core/protocol/arm_atsam/spi.c create mode 100644 tmk_core/protocol/arm_atsam/spi_master.c create mode 100644 tmk_core/protocol/arm_atsam/spi_master.h diff --git a/keyboards/massdrop/alt/config.h b/keyboards/massdrop/alt/config.h index d28094c492..085e1aebba 100644 --- a/keyboards/massdrop/alt/config.h +++ b/keyboards/massdrop/alt/config.h @@ -50,22 +50,18 @@ along with this program. If not, see . /* This Shift Register expands available hardware output lines to control additional peripherals */ /* It uses four lines from the MCU to provide 16 output lines */ /* Shift Register Clock configuration (MCU to ShiftRegister.RCLK) */ -#define SR_EXP_RCLK_PORT PB -#define SR_EXP_RCLK_PIN 14 +#define SR_EXP_RCLK_PIN B14 /* Shift Register Output Enable configuration (MCU to ShiftRegister.OE_N) */ -#define SR_EXP_OE_N_PORT PB -#define SR_EXP_OE_N_PIN 15 +#define SR_EXP_OE_PIN B15 /* SERCOM port to use for Shift Register SPI */ /* DATAOUT and SCLK must be configured to use hardware pins of this port */ -#define SR_EXP_SERCOM SERCOM2 +#define SPI_SERCOM SERCOM2 /* Shift Register SPI Data Out configuration (MCU.SERCOMx.PAD[0] to ShiftRegister.SER) */ -#define SR_EXP_DATAOUT_PORT PA -#define SR_EXP_DATAOUT_PIN 12 -#define SR_EXP_DATAOUT_MUX 2 +#define SPI_DATAOUT_PIN A12 +#define SPI_DATAOUT_MUX 2 /* Shift Register SPI Serial Clock configuration (MCU.SERCOMx.PAD[1] to ShiftRegister.SRCLK) */ -#define SR_EXP_SCLK_PORT PA -#define SR_EXP_SCLK_PIN 13 -#define SR_EXP_SCLK_MUX 2 +#define SPI_SCLK_PIN A13 +#define SPI_SCLK_MUX 2 /* Debug LED (Small LED Located near MCU) */ #define DEBUG_LED_ENABLE 1 diff --git a/keyboards/massdrop/ctrl/config.h b/keyboards/massdrop/ctrl/config.h index 3dbd9b8877..aefb900448 100644 --- a/keyboards/massdrop/ctrl/config.h +++ b/keyboards/massdrop/ctrl/config.h @@ -49,22 +49,18 @@ along with this program. If not, see . /* This Shift Register expands available hardware output lines to control additional peripherals */ /* It uses four lines from the MCU to provide 16 output lines */ /* Shift Register Clock configuration (MCU to ShiftRegister.RCLK) */ -#define SR_EXP_RCLK_PORT PB -#define SR_EXP_RCLK_PIN 14 +#define SR_EXP_RCLK_PIN B14 /* Shift Register Output Enable configuration (MCU to ShiftRegister.OE_N) */ -#define SR_EXP_OE_N_PORT PB -#define SR_EXP_OE_N_PIN 15 +#define SR_EXP_OE_PIN B15 /* SERCOM port to use for Shift Register SPI */ /* DATAOUT and SCLK must be configured to use hardware pins of this port */ -#define SR_EXP_SERCOM SERCOM2 +#define SPI_SERCOM SERCOM2 /* Shift Register SPI Data Out configuration (MCU.SERCOMx.PAD[0] to ShiftRegister.SER) */ -#define SR_EXP_DATAOUT_PORT PA -#define SR_EXP_DATAOUT_PIN 12 -#define SR_EXP_DATAOUT_MUX 2 +#define SPI_DATAOUT_PIN A12 +#define SPI_DATAOUT_MUX 2 /* Shift Register SPI Serial Clock configuration (MCU.SERCOMx.PAD[1] to ShiftRegister.SRCLK) */ -#define SR_EXP_SCLK_PORT PA -#define SR_EXP_SCLK_PIN 13 -#define SR_EXP_SCLK_MUX 2 +#define SPI_SCLK_PIN A13 +#define SPI_SCLK_MUX 2 /* Debug LED (Small LED Located near MCU) */ #define DEBUG_LED_ENABLE 1 diff --git a/tmk_core/common/arm_atsam/gpio.h b/tmk_core/common/arm_atsam/gpio.h index c2d5a30889..915ed0ef4f 100644 --- a/tmk_core/common/arm_atsam/gpio.h +++ b/tmk_core/common/arm_atsam/gpio.h @@ -64,7 +64,13 @@ typedef uint8_t pin_t; PORT->Group[SAMD_PORT(pin)].OUTCLR.reg = SAMD_PIN_MASK(pin); \ } while (0) -#define writePin(pin, level) ((level) ? (writePinHigh(pin)) : (writePinLow(pin))) +#define writePin(pin, level) \ + do { \ + if (level) \ + PORT->Group[SAMD_PORT(pin)].OUTSET.reg = SAMD_PIN_MASK(pin); \ + else \ + PORT->Group[SAMD_PORT(pin)].OUTCLR.reg = SAMD_PIN_MASK(pin); \ + } while (0) #define readPin(pin) ((PORT->Group[SAMD_PORT(pin)].IN.reg & SAMD_PIN_MASK(pin)) != 0) diff --git a/tmk_core/protocol/arm_atsam.mk b/tmk_core/protocol/arm_atsam.mk index 5bb45d658e..e3b5505966 100644 --- a/tmk_core/protocol/arm_atsam.mk +++ b/tmk_core/protocol/arm_atsam.mk @@ -9,7 +9,8 @@ ifeq ($(RGB_MATRIX_DRIVER),custom) SRC += $(ARM_ATSAM_DIR)/md_rgb_matrix.c endif SRC += $(ARM_ATSAM_DIR)/main_arm_atsam.c -SRC += $(ARM_ATSAM_DIR)/spi.c +SRC += $(ARM_ATSAM_DIR)/shift_register.c +SRC += $(ARM_ATSAM_DIR)/spi_master.c SRC += $(ARM_ATSAM_DIR)/startup.c SRC += $(ARM_ATSAM_DIR)/usb/main_usb.c diff --git a/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h b/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h index d126c66e7d..c3eab39fb1 100644 --- a/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h +++ b/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h @@ -27,7 +27,7 @@ along with this program. If not, see . #include "wait.h" #include "adc.h" #include "i2c_master.h" -#include "spi.h" +#include "shift_register.h" #include "./usb/usb2422.h" diff --git a/tmk_core/protocol/arm_atsam/shift_register.c b/tmk_core/protocol/arm_atsam/shift_register.c new file mode 100644 index 0000000000..8d63af1b59 --- /dev/null +++ b/tmk_core/protocol/arm_atsam/shift_register.c @@ -0,0 +1,118 @@ +/* +Copyright 2018 Massdrop Inc. + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include "arm_atsam_protocol.h" + +#include "spi_master.h" +#include "wait.h" +#include "gpio.h" + +// #define SR_USE_BITBANG + +// Bodge for when spi_master is not available +#ifdef SR_USE_BITBANG +# define CLOCK_DELAY 10 + +void shift_init_impl(void) { + setPinOutput(SR_EXP_RCLK_PIN); + setPinOutput(SPI_DATAOUT_PIN); + setPinOutput(SPI_SCLK_PIN); +} + +void shift_out_impl(const uint8_t *data, uint16_t length) { + writePinLow(SR_EXP_RCLK_PIN); + for (uint16_t i = 0; i < length; i++) { + uint8_t val = data[i]; + + // shift out lsb first + for (uint8_t bit = 0; bit < 8; bit++) { + writePin(SPI_DATAOUT_PIN, !!(val & (1 << bit))); + writePin(SPI_SCLK_PIN, true); + wait_us(CLOCK_DELAY); + + writePin(SPI_SCLK_PIN, false); + wait_us(CLOCK_DELAY); + } + } + writePinHigh(SR_EXP_RCLK_PIN); + return SPI_STATUS_SUCCESS; +} + +#else + +void shift_init_impl(void) { spi_init(); } + +void shift_out_impl(const uint8_t *data, uint16_t length) { + spi_start(SR_EXP_RCLK_PIN, true, 0, 0); + + spi_transmit(data, length); + + spi_stop(); +} +#endif + +// *************************************************************** + +void shift_out(const uint8_t *data, uint16_t length) { shift_out_impl(data, length); } + +void shift_enable(void) { + setPinOutput(SR_EXP_OE_PIN); + writePinLow(SR_EXP_OE_PIN); +} + +void shift_disable(void) { + setPinOutput(SR_EXP_OE_PIN); + writePinHigh(SR_EXP_OE_PIN); +} + +void shift_init(void) { + shift_disable(); + shift_init_impl(); +} + +// *************************************************************** + +sr_exp_t sr_exp_data; + +void SR_EXP_WriteData(void) { + uint8_t data[2] = { + sr_exp_data.reg & 0xFF, // Shift in bits 7-0 + (sr_exp_data.reg >> 8) & 0xFF, // Shift in bits 15-8 + }; + shift_out(data, 2); +} + +void SR_EXP_Init(void) { + shift_init(); + + sr_exp_data.reg = 0; + sr_exp_data.bit.HUB_CONNECT = 0; + sr_exp_data.bit.HUB_RESET_N = 0; + sr_exp_data.bit.S_UP = 0; + sr_exp_data.bit.E_UP_N = 1; + sr_exp_data.bit.S_DN1 = 1; + sr_exp_data.bit.E_DN1_N = 1; + sr_exp_data.bit.E_VBUS_1 = 0; + sr_exp_data.bit.E_VBUS_2 = 0; + sr_exp_data.bit.SRC_1 = 1; + sr_exp_data.bit.SRC_2 = 1; + sr_exp_data.bit.IRST = 1; + sr_exp_data.bit.SDB_N = 0; + SR_EXP_WriteData(); + + shift_enable(); +} diff --git a/tmk_core/protocol/arm_atsam/spi.h b/tmk_core/protocol/arm_atsam/shift_register.h similarity index 77% rename from tmk_core/protocol/arm_atsam/spi.h rename to tmk_core/protocol/arm_atsam/shift_register.h index dcd45f31af..56a8c7f717 100644 --- a/tmk_core/protocol/arm_atsam/spi.h +++ b/tmk_core/protocol/arm_atsam/shift_register.h @@ -15,28 +15,9 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef _SPI_H_ -#define _SPI_H_ +#pragma once -/* Macros for Shift Register control */ -#define SR_EXP_RCLK_LO PORT->Group[SR_EXP_RCLK_PORT].OUTCLR.reg = (1 << SR_EXP_RCLK_PIN) -#define SR_EXP_RCLK_HI PORT->Group[SR_EXP_RCLK_PORT].OUTSET.reg = (1 << SR_EXP_RCLK_PIN) -#define SR_EXP_OE_N_ENA PORT->Group[SR_EXP_OE_N_PORT].OUTCLR.reg = (1 << SR_EXP_OE_N_PIN) -#define SR_EXP_OE_N_DIS PORT->Group[SR_EXP_OE_N_PORT].OUTSET.reg = (1 << SR_EXP_OE_N_PIN) - -/* Determine bits to set for mux selection */ -#if SR_EXP_DATAOUT_PIN % 2 == 0 -# define SR_EXP_DATAOUT_MUX_SEL PMUXE -#else -# define SR_EXP_DATAOUT_MUX_SEL PMUXO -#endif - -/* Determine bits to set for mux selection */ -#if SR_EXP_SCLK_PIN % 2 == 0 -# define SR_EXP_SCLK_MUX_SEL PMUXE -#else -# define SR_EXP_SCLK_MUX_SEL PMUXO -#endif +#include /* Data structure to define Shift Register output expander hardware */ /* This structure gets shifted into registers LSB first */ @@ -66,5 +47,3 @@ extern sr_exp_t sr_exp_data; void SR_EXP_WriteData(void); void SR_EXP_Init(void); - -#endif //_SPI_H_ diff --git a/tmk_core/protocol/arm_atsam/spi.c b/tmk_core/protocol/arm_atsam/spi.c deleted file mode 100644 index 3b118bc1f1..0000000000 --- a/tmk_core/protocol/arm_atsam/spi.c +++ /dev/null @@ -1,92 +0,0 @@ -/* -Copyright 2018 Massdrop Inc. - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include "arm_atsam_protocol.h" - -sr_exp_t sr_exp_data; - -void SR_EXP_WriteData(void) { - SR_EXP_RCLK_LO; - - while (!(SR_EXP_SERCOM->SPI.INTFLAG.bit.DRE)) { - DBGC(DC_SPI_WRITE_DRE); - } - - SR_EXP_SERCOM->SPI.DATA.bit.DATA = sr_exp_data.reg & 0xFF; // Shift in bits 7-0 - while (!(SR_EXP_SERCOM->SPI.INTFLAG.bit.TXC)) { - DBGC(DC_SPI_WRITE_TXC_1); - } - - SR_EXP_SERCOM->SPI.DATA.bit.DATA = (sr_exp_data.reg >> 8) & 0xFF; // Shift in bits 15-8 - while (!(SR_EXP_SERCOM->SPI.INTFLAG.bit.TXC)) { - DBGC(DC_SPI_WRITE_TXC_2); - } - - SR_EXP_RCLK_HI; -} - -void SR_EXP_Init(void) { - DBGC(DC_SPI_INIT_BEGIN); - - CLK_set_spi_freq(CHAN_SERCOM_SPI, FREQ_SPI_DEFAULT); - - // Set up MCU Shift Register pins - PORT->Group[SR_EXP_RCLK_PORT].DIRSET.reg = (1 << SR_EXP_RCLK_PIN); - PORT->Group[SR_EXP_OE_N_PORT].DIRSET.reg = (1 << SR_EXP_OE_N_PIN); - - // Set up MCU SPI pins - PORT->Group[SR_EXP_DATAOUT_PORT].PMUX[SR_EXP_DATAOUT_PIN / 2].bit.SR_EXP_DATAOUT_MUX_SEL = SR_EXP_DATAOUT_MUX; // MUX select for sercom - PORT->Group[SR_EXP_SCLK_PORT].PMUX[SR_EXP_SCLK_PIN / 2].bit.SR_EXP_SCLK_MUX_SEL = SR_EXP_SCLK_MUX; // MUX select for sercom - PORT->Group[SR_EXP_DATAOUT_PORT].PINCFG[SR_EXP_DATAOUT_PIN].bit.PMUXEN = 1; // MUX Enable - PORT->Group[SR_EXP_SCLK_PORT].PINCFG[SR_EXP_SCLK_PIN].bit.PMUXEN = 1; // MUX Enable - - // Initialize Shift Register - SR_EXP_OE_N_DIS; - SR_EXP_RCLK_HI; - - SR_EXP_SERCOM->SPI.CTRLA.bit.DORD = 1; // Data Order - LSB is transferred first - SR_EXP_SERCOM->SPI.CTRLA.bit.CPOL = 1; // Clock Polarity - SCK high when idle. Leading edge of cycle is falling. Trailing rising. - SR_EXP_SERCOM->SPI.CTRLA.bit.CPHA = 1; // Clock Phase - Leading Edge Falling, change, Trailing Edge - Rising, sample - SR_EXP_SERCOM->SPI.CTRLA.bit.DIPO = 3; // Data In Pinout - SERCOM PAD[3] is used as data input (Configure away from DOPO. Not using input.) - SR_EXP_SERCOM->SPI.CTRLA.bit.DOPO = 0; // Data Output PAD[0], Serial Clock PAD[1] - SR_EXP_SERCOM->SPI.CTRLA.bit.MODE = 3; // Operating Mode - Master operation - - SR_EXP_SERCOM->SPI.CTRLA.bit.ENABLE = 1; // Enable - Peripheral is enabled or being enabled - while (SR_EXP_SERCOM->SPI.SYNCBUSY.bit.ENABLE) { - DBGC(DC_SPI_SYNC_ENABLING); - } - - sr_exp_data.reg = 0; - sr_exp_data.bit.HUB_CONNECT = 0; - sr_exp_data.bit.HUB_RESET_N = 0; - sr_exp_data.bit.S_UP = 0; - sr_exp_data.bit.E_UP_N = 1; - sr_exp_data.bit.S_DN1 = 1; - sr_exp_data.bit.E_DN1_N = 1; - sr_exp_data.bit.E_VBUS_1 = 0; - sr_exp_data.bit.E_VBUS_2 = 0; - sr_exp_data.bit.SRC_1 = 1; - sr_exp_data.bit.SRC_2 = 1; - sr_exp_data.bit.IRST = 1; - sr_exp_data.bit.SDB_N = 0; - SR_EXP_WriteData(); - - // Enable Shift Register output - SR_EXP_OE_N_ENA; - - DBGC(DC_SPI_INIT_COMPLETE); -} diff --git a/tmk_core/protocol/arm_atsam/spi_master.c b/tmk_core/protocol/arm_atsam/spi_master.c new file mode 100644 index 0000000000..9781d45b1e --- /dev/null +++ b/tmk_core/protocol/arm_atsam/spi_master.c @@ -0,0 +1,109 @@ +/* +Copyright 2018 Massdrop Inc. + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include "arm_atsam_protocol.h" +#include "spi_master.h" +#include "gpio.h" + +/* Determine bits to set for mux selection */ +#if SPI_DATAOUT_PIN % 2 == 0 +# define SPI_DATAOUT_MUX_SEL PMUXE +#else +# define SPI_DATAOUT_MUX_SEL PMUXO +#endif + +/* Determine bits to set for mux selection */ +#if SPI_SCLK_PIN % 2 == 0 +# define SPI_SCLK_MUX_SEL PMUXE +#else +# define SPI_SCLK_MUX_SEL PMUXO +#endif + +static pin_t currentSelectPin = NO_PIN; + +__attribute__((weak)) void spi_init(void) { + static bool is_initialised = false; + if (!is_initialised) { + is_initialised = true; + + DBGC(DC_SPI_INIT_BEGIN); + + CLK_set_spi_freq(CHAN_SERCOM_SPI, FREQ_SPI_DEFAULT); + + // Set up MCU SPI pins + PORT->Group[SAMD_PORT(SPI_DATAOUT_PIN)].PMUX[SAMD_PIN(SPI_DATAOUT_PIN) / 2].bit.SPI_DATAOUT_MUX_SEL = SPI_DATAOUT_MUX; // MUX select for sercom + PORT->Group[SAMD_PORT(SPI_SCLK_PIN)].PMUX[SAMD_PIN(SPI_SCLK_PIN) / 2].bit.SPI_SCLK_MUX_SEL = SPI_SCLK_MUX; // MUX select for sercom + PORT->Group[SAMD_PORT(SPI_DATAOUT_PIN)].PINCFG[SAMD_PIN(SPI_DATAOUT_PIN)].bit.PMUXEN = 1; // MUX Enable + PORT->Group[SAMD_PORT(SPI_SCLK_PIN)].PINCFG[SAMD_PIN(SPI_SCLK_PIN)].bit.PMUXEN = 1; // MUX Enable + + DBGC(DC_SPI_INIT_COMPLETE); + } +} + +bool spi_start(pin_t csPin, bool lsbFirst, uint8_t mode, uint16_t divisor) { + if (currentSelectPin != NO_PIN || csPin == NO_PIN) { + return false; + } + + currentSelectPin = csPin; + setPinOutput(currentSelectPin); + writePinLow(currentSelectPin); + + SPI_SERCOM->SPI.CTRLA.bit.DORD = lsbFirst; // Data Order - LSB is transferred first + SPI_SERCOM->SPI.CTRLA.bit.CPOL = 1; // Clock Polarity - SCK high when idle. Leading edge of cycle is falling. Trailing rising. + SPI_SERCOM->SPI.CTRLA.bit.CPHA = 1; // Clock Phase - Leading Edge Falling, change, Trailing Edge - Rising, sample + SPI_SERCOM->SPI.CTRLA.bit.DIPO = 3; // Data In Pinout - SERCOM PAD[3] is used as data input (Configure away from DOPO. Not using input.) + SPI_SERCOM->SPI.CTRLA.bit.DOPO = 0; // Data Output PAD[0], Serial Clock PAD[1] + SPI_SERCOM->SPI.CTRLA.bit.MODE = 3; // Operating Mode - Master operation + + SPI_SERCOM->SPI.CTRLA.bit.ENABLE = 1; // Enable - Peripheral is enabled or being enabled + while (SPI_SERCOM->SPI.SYNCBUSY.bit.ENABLE) { + DBGC(DC_SPI_SYNC_ENABLING); + } + return true; +} + +spi_status_t spi_transmit(const uint8_t *data, uint16_t length) { + while (!(SPI_SERCOM->SPI.INTFLAG.bit.DRE)) { + DBGC(DC_SPI_WRITE_DRE); + } + + for (uint16_t i = 0; i < length; i++) { + SPI_SERCOM->SPI.DATA.bit.DATA = data[i]; + while (!(SPI_SERCOM->SPI.INTFLAG.bit.TXC)) { + DBGC(DC_SPI_WRITE_TXC_1); + } + } + + return SPI_STATUS_SUCCESS; +} + +void spi_stop(void) { + if (currentSelectPin != NO_PIN) { + setPinOutput(currentSelectPin); + writePinHigh(currentSelectPin); + currentSelectPin = NO_PIN; + } +} + +// Not implemented yet.... + +spi_status_t spi_write(uint8_t data); + +spi_status_t spi_read(void); + +spi_status_t spi_receive(uint8_t *data, uint16_t length); diff --git a/tmk_core/protocol/arm_atsam/spi_master.h b/tmk_core/protocol/arm_atsam/spi_master.h new file mode 100644 index 0000000000..26c55128be --- /dev/null +++ b/tmk_core/protocol/arm_atsam/spi_master.h @@ -0,0 +1,48 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include + +typedef int16_t spi_status_t; + +#define SPI_STATUS_SUCCESS (0) +#define SPI_STATUS_ERROR (-1) +#define SPI_STATUS_TIMEOUT (-2) + +#define SPI_TIMEOUT_IMMEDIATE (0) +#define SPI_TIMEOUT_INFINITE (0xFFFF) + +#ifdef __cplusplus +extern "C" { +#endif +void spi_init(void); + +bool spi_start(pin_t slavePin, bool lsbFirst, uint8_t mode, uint16_t divisor); + +spi_status_t spi_write(uint8_t data); + +spi_status_t spi_read(void); + +spi_status_t spi_transmit(const uint8_t *data, uint16_t length); + +spi_status_t spi_receive(uint8_t *data, uint16_t length); + +void spi_stop(void); +#ifdef __cplusplus +} +#endif From 0093d3d761e60a31bb2a15a5859dbd0c08ef9999 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Fri, 22 Oct 2021 00:49:58 +0100 Subject: [PATCH 319/595] Initial USB2422 driver (#14835) --- .../usb/usb2422.h => drivers/usb2422.c | 216 +++++++++--------- drivers/usb2422.h | 59 +++++ keyboards/massdrop/alt/alt.h | 2 +- keyboards/massdrop/alt/config.h | 9 + keyboards/massdrop/ctrl/config.h | 9 + keyboards/massdrop/ctrl/ctrl.h | 2 +- tmk_core/protocol/arm_atsam.mk | 4 +- .../protocol/arm_atsam/arm_atsam_protocol.h | 2 +- tmk_core/protocol/arm_atsam/i2c_master.c | 19 ++ tmk_core/protocol/arm_atsam/i2c_master.h | 9 + tmk_core/protocol/arm_atsam/main_arm_atsam.c | 4 +- .../arm_atsam/usb/{usb2422.c => usb_hub.c} | 98 +------- tmk_core/protocol/arm_atsam/usb/usb_hub.h | 51 +++++ 13 files changed, 278 insertions(+), 206 deletions(-) rename tmk_core/protocol/arm_atsam/usb/usb2422.h => drivers/usb2422.c (68%) create mode 100644 drivers/usb2422.h rename tmk_core/protocol/arm_atsam/usb/{usb2422.c => usb_hub.c} (67%) create mode 100644 tmk_core/protocol/arm_atsam/usb/usb_hub.h diff --git a/tmk_core/protocol/arm_atsam/usb/usb2422.h b/drivers/usb2422.c similarity index 68% rename from tmk_core/protocol/arm_atsam/usb/usb2422.h rename to drivers/usb2422.c index b4830b5bc8..62b919093b 100644 --- a/tmk_core/protocol/arm_atsam/usb/usb2422.h +++ b/drivers/usb2422.c @@ -1,32 +1,25 @@ -/* -Copyright 2018 Massdrop Inc. - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#ifndef _USB2422_H_ -#define _USB2422_H_ - -#define REV_USB2422 0x100 - -#define USB2422_ADDR 0x58 // I2C device address, one instance - -#define USB2422_HUB_ACTIVE_GROUP 0 // PA -#define USB2422_HUB_ACTIVE_PIN 18 // 18 +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include +#include "usb2422.h" +#include "i2c_master.h" +#include "wait.h" +#include "gpio.h" /* -------- USB2422_VID : (USB2422L Offset: 0x00) (R/W 16) Vendor ID -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint16_t VID_LSB : 8; @@ -34,10 +27,8 @@ typedef union { } bit; /*!< Structure used for bit access */ uint16_t reg; /*!< Type used for register access */ } USB2422_VID_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_PID : (USB2422L Offset: 0x02) (R/W 16) Product ID -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint16_t PID_LSB : 8; @@ -45,10 +36,8 @@ typedef union { } bit; /*!< Structure used for bit access */ uint16_t reg; /*!< Type used for register access */ } USB2422_PID_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_DID : (USB2422L Offset: 0x04) (R/W 16) Device ID -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint16_t DID_LSB : 8; @@ -56,10 +45,8 @@ typedef union { } bit; /*!< Structure used for bit access */ uint16_t reg; /*!< Type used for register access */ } USB2422_DID_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_CFG1 : (USB2422L Offset: 0x06) (R/W 8) Configuration Data Byte 1-------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint8_t PORT_PWR : 1; @@ -72,10 +59,8 @@ typedef union { } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_CFG1_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_CFG2 : (USB2422L Offset: 0x07) (R/W 8) Configuration Data Byte 2-------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint8_t : 3; @@ -86,10 +71,8 @@ typedef union { } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_CFG2_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_CFG3 : (USB2422L Offset: 0x08) (R/W 16) Configuration Data Byte 3-------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint8_t STRING_EN : 1; @@ -99,10 +82,8 @@ typedef union { } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_CFG3_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_NRD : (USB2422L Offset: 0x09) (R/W 8) Non Removable Device -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint8_t : 5; @@ -112,10 +93,8 @@ typedef union { } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_NRD_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_PDS : (USB2422L Offset: 0x0A) (R/W 8) Port Diable for Self-Powered Operation -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint8_t : 1; @@ -125,10 +104,9 @@ typedef union { } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_PDS_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_PDB : (USB2422L Offset: 0x0B) (R/W 8) Port Diable for Bus-Powered Operation -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) + typedef union { struct { uint8_t : 1; @@ -138,125 +116,98 @@ typedef union { } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_PDB_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_MAXPS : (USB2422L Offset: 0x0C) (R/W 8) Max Power for Self-Powered Operation -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint8_t MAX_PWR_SP : 8; } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_MAXPS_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_MAXPB : (USB2422L Offset: 0x0D) (R/W 8) Max Power for Bus-Powered Operation -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint8_t MAX_PWR_BP : 8; } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_MAXPB_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_HCMCS : (USB2422L Offset: 0x0E) (R/W 8) Hub Controller Max Current for Self-Powered Operation -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint8_t HC_MAX_C_SP : 8; } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_HCMCS_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_HCMCB : (USB2422L Offset: 0x0F) (R/W 8) Hub Controller Max Current for Bus-Powered Operation -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint8_t HC_MAX_C_BP : 8; } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_HCMCB_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_PWRT : (USB2422L Offset: 0x10) (R/W 8) Power On Time -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint8_t POWER_ON_TIME : 8; } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_PWRT_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_LANGID LSB : (USB2422L Offset: 0x11) (R/W 16) Language ID -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint8_t LANGID_LSB : 8; } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_LANGID_LSB_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_LANGID MSB : (USB2422L Offset: 0x12) (R/W 16) Language ID -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint8_t LANGID_MSB : 8; } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_LANGID_MSB_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_MFRSL : (USB2422L Offset: 0x13) (R/W 8) Manufacturer String Length -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint8_t MFR_STR_LEN : 8; } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_MFRSL_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_PRDSL : (USB2422L Offset: 0x14) (R/W 8) Product String Length -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint8_t PRD_STR_LEN : 8; } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_PRDSL_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_SERSL : (USB2422L Offset: 0x15) (R/W 8) Serial String Length -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint8_t SER_STR_LEN : 8; } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_SERSL_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_MFRSTR : (USB2422L Offset: 0x16-53) (R/W 8) Maufacturer String -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef uint16_t USB2422_MFRSTR_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_PRDSTR : (USB2422L Offset: 0x54-91) (R/W 8) Product String -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef uint16_t USB2422_PRDSTR_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_SERSTR : (USB2422L Offset: 0x92-CF) (R/W 8) Serial String -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef uint16_t USB2422_SERSTR_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_BCEN : (USB2422L Offset: 0xD0) (R/W 8) Battery Charging Enable -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) + typedef union { struct { uint8_t : 1; @@ -266,10 +217,8 @@ typedef union { } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_BCEN_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_BOOSTUP : (USB2422L Offset: 0xF6) (R/W 8) Boost Upstream -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint8_t BOOST : 2; @@ -277,10 +226,8 @@ typedef union { } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_BOOSTUP_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_BOOSTDOWN : (USB2422L Offset: 0xF8) (R/W 8) Boost Downstream -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint8_t BOOST1 : 2; @@ -289,10 +236,8 @@ typedef union { } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_BOOSTDOWN_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_PRTSP : (USB2422L Offset: 0xFA) (R/W 8) Port Swap -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint8_t : 1; @@ -302,10 +247,8 @@ typedef union { } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_PRTSP_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /* -------- USB2422_PRTR12 : (USB2422L Offset: 0xFB) (R/W 8) Port 1/2 Remap -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint8_t PORT1_REMAP : 4; @@ -313,7 +256,7 @@ typedef union { } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_PRTR12_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ + #define USB2422_PRTR12_DISABLE 0 #define USB2422_PRT12_P2TOL1 1 #define USB2422_PRT12_P2XTOL2 2 @@ -321,7 +264,6 @@ typedef union { #define USB2422_PRT12_P1XTOL2 2 /* -------- USB2422_STCD : (USB2422L Offset: 0xFF) (R/W 8) Status Command -------- */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef union { struct { uint8_t USB_ATTACH : 1; @@ -331,10 +273,8 @@ typedef union { } bit; /*!< Structure used for bit access */ uint8_t reg; /*!< Type used for register access */ } USB2422_STCD_Type; -#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */ /** \brief USB2422 device hardware registers */ -#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) typedef struct { USB2422_VID_Type VID; /**< \brief Offset: 0x00*/ USB2422_PID_Type PID; /**< \brief Offset: 0x02*/ @@ -368,35 +308,95 @@ typedef struct { USB2422_PRTR12_Type PRTR12; /**< \brief Offset: 0xFB*/ uint8_t Reserved4[0x3]; USB2422_STCD_Type STCD; /**< \brief Offset: 0xFF*/ -} Usb2422; -#endif +} Usb2422_t; + +// *************************************************************** + +static Usb2422_t config; -#define PORT_DETECT_RETRY_INTERVAL 2000 +// *************************************************************** -#define USB_EXTRA_ADC_THRESHOLD 900 +/** \brief Handle the conversion to allow simple strings + */ +static void USB2422_strcpy(const char* str, USB2422_MFRSTR_Type* dest, uint8_t len) { + for (uint8_t i = 0; i < len; i++) { + dest[i] = str[i]; + } +} -#define USB_EXTRA_STATE_DISABLED 0 -#define USB_EXTRA_STATE_ENABLED 1 -#define USB_EXTRA_STATE_UNKNOWN 2 -#define USB_EXTRA_STATE_DISABLED_UNTIL_REPLUG 3 +/** \brief Handle the conversion to allow simple strings + */ +static void USB2422_write_block(void) { + static unsigned char i2c0_buf[34]; -#define USB_HOST_PORT_1 0 -#define USB_HOST_PORT_2 1 -#define USB_HOST_PORT_UNKNOWN 2 + unsigned char* dest = i2c0_buf; + unsigned char* src; + unsigned char* base = (unsigned char*)&config; -extern uint8_t usb_host_port; -extern uint8_t usb_extra_state; -extern uint8_t usb_extra_manual; -extern uint8_t usb_gcr_auto; + for (src = base; src < base + 256; src += 32) { + dest[0] = src - base; + dest[1] = 32; + memcpy(&dest[2], src, 32); + i2c_transmit(USB2422_ADDRESS, dest, 34, 50000); + wait_us(100); + } +} -void USB2422_init(void); -void USB_reset(void); -void USB_configure(void); -uint16_t USB_active(void); -void USB_set_host_by_voltage(void); -uint16_t adc_get(uint8_t muxpos); -uint8_t USB2422_Port_Detect_Init(void); -void USB_HandleExtraDevice(void); -void USB_ExtraSetState(uint8_t state); +// *************************************************************** -#endif //_USB2422_H_ +void USB2422_init() { +#ifdef USB2422_RESET_PIN + setPinOutput(USB2422_RESET_PIN); +#endif +#ifdef USB2422_ACTIVE_PIN + setPinInput(USB2422_ACTIVE_PIN); +#endif + + i2c_init(); // IC2 clk must be high at USB2422 reset release time to signal SMB configuration +} + +void USB2422_configure() { + static const char SERNAME[] = "Unavailable"; + + memset(&config, 0, sizeof(Usb2422_t)); + + // configure Usb2422 registers + config.VID.reg = USB2422_VENDOR_ID; + config.PID.reg = USB2422_PRODUCT_ID; + config.DID.reg = USB2422_DEVICE_VER; // BCD format, eg 01.01 + config.CFG1.bit.SELF_BUS_PWR = 1; // self powered for now + config.CFG1.bit.HS_DISABLE = 1; // full or high speed + // config.CFG2.bit.COMPOUND = 0; // compound device + config.CFG3.bit.STRING_EN = 1; // strings enabled + // config.NRD.bit.PORT2_NR = 0; // MCU is non-removable + config.MAXPB.reg = 20; // 0mA + config.HCMCB.reg = 20; // 0mA + config.MFRSL.reg = sizeof(USB2422_MANUFACTURER); + config.PRDSL.reg = sizeof(USB2422_PRODUCT); + config.SERSL.reg = sizeof(SERNAME); + USB2422_strcpy(USB2422_MANUFACTURER, config.MFRSTR, sizeof(USB2422_MANUFACTURER)); + USB2422_strcpy(USB2422_PRODUCT, config.PRDSTR, sizeof(USB2422_PRODUCT)); + USB2422_strcpy(SERNAME, config.SERSTR, sizeof(SERNAME)); + // config.BOOSTUP.bit.BOOST=3; //upstream port + // config.BOOSTDOWN.bit.BOOST1=0; // extra port + // config.BOOSTDOWN.bit.BOOST2=2; //MCU is close + config.STCD.bit.USB_ATTACH = 1; + + USB2422_write_block(); +} + +void USB2422_reset() { +#ifdef USB2422_RESET_PIN + writePinLow(USB2422_RESET_PIN); + wait_us(2); + writePinHigh(USB2422_RESET_PIN); +#endif +} + +bool USB2422_active() { +#ifdef USB2422_ACTIVE_PIN + return readPin(USB2422_ACTIVE_PIN); +#else + return 1; +#endif +} diff --git a/drivers/usb2422.h b/drivers/usb2422.h new file mode 100644 index 0000000000..2e435b02bc --- /dev/null +++ b/drivers/usb2422.h @@ -0,0 +1,59 @@ +/* Copyright 2021 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include + +#ifndef USB2422_ADDRESS +# define USB2422_ADDRESS 0x58 +#endif + +#ifndef USB2422_VENDOR_ID +# define USB2422_VENDOR_ID 0xFEED +#endif +#ifndef USB2422_PRODUCT_ID +# define USB2422_PRODUCT_ID 0x0001 +#endif +#ifndef USB2422_DEVICE_VER +# define USB2422_DEVICE_VER 0x0001 +#endif + +#ifndef USB2422_MANUFACTURER +# define USB2422_MANUFACTURER "QMK" +#endif +#ifndef USB2422_PRODUCT +# define USB2422_PRODUCT "QMK Hub" +#endif + +/** \brief Initialises the dependent subsystems */ +void USB2422_init(void); + +/** \brief Push configuration to the USB2422 device */ +void USB2422_configure(void); + +/** \brief Reset the chip (RESET_N) + * + * NOTE: + * Depends on a valid USB2422_RESET_PIN configuration + */ +void USB2422_reset(void); + +/** \brief Indicates the USB state of the hub (SUSP_IND) + * + * NOTE: + * Depends on a valid USB2422_ACTIVE_PIN configuration + */ +bool USB2422_active(void); diff --git a/keyboards/massdrop/alt/alt.h b/keyboards/massdrop/alt/alt.h index 0396095450..c3761bee8b 100644 --- a/keyboards/massdrop/alt/alt.h +++ b/keyboards/massdrop/alt/alt.h @@ -7,7 +7,7 @@ #include "i2c_master.h" #include "md_rgb_matrix.h" //For led keycodes #include "usb/udi_cdc.h" -#include "usb/usb2422.h" +#include "usb/usb_hub.h" #define LAYOUT_65_ansi_blocker( \ K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, K13, K14, K15, \ diff --git a/keyboards/massdrop/alt/config.h b/keyboards/massdrop/alt/config.h index 085e1aebba..c37949a74b 100644 --- a/keyboards/massdrop/alt/config.h +++ b/keyboards/massdrop/alt/config.h @@ -90,6 +90,15 @@ along with this program. If not, see . #define DEBUG_BOOT_TRACING_PORT PB #define DEBUG_BOOT_TRACING_PIN 23 +/* USB2422 config */ +#define USB2422_ADDRESS 0x58 +#define USB2422_VENDOR_ID 0x04D8 +#define USB2422_PRODUCT_ID 0xEEC5 +#define USB2422_DEVICE_VER 0x0101 +#define USB2422_MANUFACTURER "Massdrop Inc." +#define USB2422_PRODUCT "Massdrop Hub" +#define USB2422_ACTIVE_PIN A18 + /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 diff --git a/keyboards/massdrop/ctrl/config.h b/keyboards/massdrop/ctrl/config.h index aefb900448..fe8b600234 100644 --- a/keyboards/massdrop/ctrl/config.h +++ b/keyboards/massdrop/ctrl/config.h @@ -89,6 +89,15 @@ along with this program. If not, see . #define DEBUG_BOOT_TRACING_PORT PB #define DEBUG_BOOT_TRACING_PIN 23 +/* USB2422 config */ +#define USB2422_ADDRESS 0x58 +#define USB2422_VENDOR_ID 0x04D8 +#define USB2422_PRODUCT_ID 0xEEC5 +#define USB2422_DEVICE_VER 0x0101 +#define USB2422_MANUFACTURER "Massdrop Inc." +#define USB2422_PRODUCT "Massdrop Hub" +#define USB2422_ACTIVE_PIN A18 + /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 diff --git a/keyboards/massdrop/ctrl/ctrl.h b/keyboards/massdrop/ctrl/ctrl.h index 1650beb9a4..a3d66ba775 100644 --- a/keyboards/massdrop/ctrl/ctrl.h +++ b/keyboards/massdrop/ctrl/ctrl.h @@ -7,7 +7,7 @@ #include "i2c_master.h" #include "md_rgb_matrix.h" //For led keycodes #include "usb/udi_cdc.h" -#include "usb/usb2422.h" +#include "usb/usb_hub.h" #define LAYOUT( \ K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, K12, K13, K14, K15, \ diff --git a/tmk_core/protocol/arm_atsam.mk b/tmk_core/protocol/arm_atsam.mk index e3b5505966..ffd1fa9f50 100644 --- a/tmk_core/protocol/arm_atsam.mk +++ b/tmk_core/protocol/arm_atsam.mk @@ -20,10 +20,12 @@ SRC += $(ARM_ATSAM_DIR)/usb/udi_hid.c SRC += $(ARM_ATSAM_DIR)/usb/udi_hid_kbd.c SRC += $(ARM_ATSAM_DIR)/usb/udi_hid_kbd_desc.c SRC += $(ARM_ATSAM_DIR)/usb/ui.c -SRC += $(ARM_ATSAM_DIR)/usb/usb2422.c SRC += $(ARM_ATSAM_DIR)/usb/usb.c SRC += $(ARM_ATSAM_DIR)/usb/usb_device_udd.c +SRC += $(ARM_ATSAM_DIR)/usb/usb_hub.c SRC += $(ARM_ATSAM_DIR)/usb/usb_util.c +SRC += $(DRIVER_PATH)/usb2422.c + # Search Path VPATH += $(TMK_DIR)/$(ARM_ATSAM_DIR) diff --git a/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h b/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h index c3eab39fb1..e1749f872d 100644 --- a/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h +++ b/tmk_core/protocol/arm_atsam/arm_atsam_protocol.h @@ -29,7 +29,7 @@ along with this program. If not, see . #include "i2c_master.h" #include "shift_register.h" -#include "./usb/usb2422.h" +#include "./usb/usb_hub.h" #ifndef MD_BOOTLOADER diff --git a/tmk_core/protocol/arm_atsam/i2c_master.c b/tmk_core/protocol/arm_atsam/i2c_master.c index dda2f85b00..af046625f4 100644 --- a/tmk_core/protocol/arm_atsam/i2c_master.c +++ b/tmk_core/protocol/arm_atsam/i2c_master.c @@ -564,4 +564,23 @@ uint8_t i2c_led_q_run(void) { return 1; } + +__attribute__((weak)) void i2c_init(void) { + static bool is_initialised = false; + if (!is_initialised) { + is_initialised = true; + + i2c0_init(); + } +} + +i2c_status_t i2c_transmit(uint8_t address, const uint8_t *data, uint16_t length, uint16_t timeout) { + uint8_t ret = i2c0_transmit(address, (uint8_t *)data, length, timeout); + SERCOM0->I2CM.CTRLB.bit.CMD = 0x03; + while (SERCOM0->I2CM.SYNCBUSY.bit.SYSOP) { + DBGC(DC_USB_WRITE2422_BLOCK_SYNC_SYSOP); + } + return ret ? I2C_STATUS_SUCCESS : I2C_STATUS_ERROR; +} + #endif // !defined(MD_BOOTLOADER) && defined(RGB_MATRIX_ENABLE) diff --git a/tmk_core/protocol/arm_atsam/i2c_master.h b/tmk_core/protocol/arm_atsam/i2c_master.h index 68773f213f..e11235d447 100644 --- a/tmk_core/protocol/arm_atsam/i2c_master.h +++ b/tmk_core/protocol/arm_atsam/i2c_master.h @@ -101,4 +101,13 @@ void i2c0_init(void); uint8_t i2c0_transmit(uint8_t address, uint8_t *data, uint16_t length, uint16_t timeout); void i2c0_stop(void); +// Terrible interface compatiblity... +#define I2C_STATUS_SUCCESS (0) +#define I2C_STATUS_ERROR (-1) + +typedef int16_t i2c_status_t; + +void i2c_init(void); +i2c_status_t i2c_transmit(uint8_t address, const uint8_t *data, uint16_t length, uint16_t timeout); + #endif // _I2C_MASTER_H_ diff --git a/tmk_core/protocol/arm_atsam/main_arm_atsam.c b/tmk_core/protocol/arm_atsam/main_arm_atsam.c index 858b4cd9fc..1df5112ed8 100644 --- a/tmk_core/protocol/arm_atsam/main_arm_atsam.c +++ b/tmk_core/protocol/arm_atsam/main_arm_atsam.c @@ -296,7 +296,7 @@ int main(void) { matrix_init(); - USB2422_init(); + USB_Hub_init(); DBGC(DC_MAIN_UDC_START_BEGIN); udc_start(); @@ -306,7 +306,7 @@ int main(void) { CDC_init(); DBGC(DC_MAIN_CDC_INIT_COMPLETE); - while (USB2422_Port_Detect_Init() == 0) { + while (USB_Hub_Port_Detect_Init() == 0) { } DBG_LED_OFF; diff --git a/tmk_core/protocol/arm_atsam/usb/usb2422.c b/tmk_core/protocol/arm_atsam/usb/usb_hub.c similarity index 67% rename from tmk_core/protocol/arm_atsam/usb/usb2422.c rename to tmk_core/protocol/arm_atsam/usb/usb_hub.c index a878cb6b7c..c5fd284aab 100644 --- a/tmk_core/protocol/arm_atsam/usb/usb2422.c +++ b/tmk_core/protocol/arm_atsam/usb/usb_hub.c @@ -16,25 +16,9 @@ along with this program. If not, see . */ #include "arm_atsam_protocol.h" +#include "drivers/usb2422.h" #include -Usb2422 USB2422_shadow; -unsigned char i2c0_buf[34]; - -const uint16_t MFRNAME[] = {'M', 'a', 's', 's', 'd', 'r', 'o', 'p', ' ', 'I', 'n', 'c', '.'}; // Massdrop Inc. -const uint16_t PRDNAME[] = {'M', 'a', 's', 's', 'd', 'r', 'o', 'p', ' ', 'H', 'u', 'b'}; // Massdrop Hub -#ifndef MD_BOOTLOADER -// Serial number reported stops before first found space character or at last found character -const uint16_t SERNAME[] = {'U', 'n', 'a', 'v', 'a', 'i', 'l', 'a', 'b', 'l', 'e'}; // Unavailable -#else -// In production, this field is found, modified, and offset noted as the last 32-bit word in the bootloader space -// The offset allows the application to use the factory programmed serial (which may differ from the physical serial label) -// Serial number reported stops before first found space character or when max size is reached -__attribute__((__aligned__(4))) const uint16_t SERNAME[BOOTLOADER_SERIAL_MAX_SIZE] = {'M', 'D', 'H', 'U', 'B', 'B', 'O', 'O', 'T', 'L', '0', '0', '0', '0', '0', '0', '0', '0', '0', '0'}; -// NOTE: Serial replacer will not write a string longer than given here as a precaution, so give enough -// space as needed and adjust BOOTLOADER_SERIAL_MAX_SIZE to match amount given -#endif // MD_BOOTLOADER - uint8_t usb_host_port; #ifndef MD_BOOTLOADER @@ -47,29 +31,7 @@ uint8_t usb_gcr_auto; uint16_t adc_extra; -void USB_write2422_block(void) { - unsigned char *dest = i2c0_buf; - unsigned char *src; - unsigned char *base = (unsigned char *)&USB2422_shadow; - - DBGC(DC_USB_WRITE2422_BLOCK_BEGIN); - - for (src = base; src < base + 256; src += 32) { - dest[0] = src - base; - dest[1] = 32; - memcpy(&dest[2], src, 32); - i2c0_transmit(USB2422_ADDR, dest, 34, 50000); - SERCOM0->I2CM.CTRLB.bit.CMD = 0x03; - while (SERCOM0->I2CM.SYNCBUSY.bit.SYSOP) { - DBGC(DC_USB_WRITE2422_BLOCK_SYNC_SYSOP); - } - wait_us(100); - } - - DBGC(DC_USB_WRITE2422_BLOCK_COMPLETE); -} - -void USB2422_init(void) { +void USB_Hub_init(void) { Gclk * pgclk = GCLK; Mclk * pmclk = MCLK; Port * pport = PORT; @@ -147,9 +109,7 @@ void USB2422_init(void) { pusb->DEVICE.QOSCTRL.bit.DQOS = 2; pusb->DEVICE.QOSCTRL.bit.CQOS = 2; - pport->Group[USB2422_HUB_ACTIVE_GROUP].PINCFG[USB2422_HUB_ACTIVE_PIN].bit.INEN = 1; - - i2c0_init(); // IC2 clk must be high at USB2422 reset release time to signal SMB configuration + USB2422_init(); sr_exp_data.bit.HUB_CONNECT = 1; // connect signal sr_exp_data.bit.HUB_RESET_N = 1; // reset high @@ -181,62 +141,16 @@ void USB_reset(void) { } void USB_configure(void) { - Usb2422 *pusb2422 = &USB2422_shadow; - memset(pusb2422, 0, sizeof(Usb2422)); - - uint16_t *serial_use = (uint16_t *)SERNAME; // Default to use SERNAME from this file - uint8_t serial_length = sizeof(SERNAME) / sizeof(uint16_t); // Default to use SERNAME from this file -#ifndef MD_BOOTLOADER - uint32_t serial_ptrloc = (uint32_t)&_srom - 4; -#else // MD_BOOTLOADER - uint32_t serial_ptrloc = (uint32_t)&_erom - 4; -#endif // MD_BOOTLOADER - uint32_t serial_address = *(uint32_t *)serial_ptrloc; // Address of bootloader's serial number if available - DBGC(DC_USB_CONFIGURE_BEGIN); - if (serial_address != 0xFFFFFFFF && serial_address < serial_ptrloc) // Check for factory programmed serial address - { - if ((serial_address & 0xFF) % 4 == 0) // Check alignment - { - serial_use = (uint16_t *)(serial_address); - serial_length = 0; - while ((*(serial_use + serial_length) > 32 && *(serial_use + serial_length) < 127) && serial_length < BOOTLOADER_SERIAL_MAX_SIZE) { - serial_length++; - DBGC(DC_USB_CONFIGURE_GET_SERIAL); - } - } - } - - // configure Usb2422 registers - pusb2422->VID.reg = 0x04D8; // from Microchip 4/19/2018 - pusb2422->PID.reg = 0xEEC5; // from Microchip 4/19/2018 = Massdrop, Inc. USB Hub - pusb2422->DID.reg = 0x0101; // BCD 01.01 - pusb2422->CFG1.bit.SELF_BUS_PWR = 1; // self powered for now - pusb2422->CFG1.bit.HS_DISABLE = 1; // full or high speed - // pusb2422->CFG2.bit.COMPOUND = 0; // compound device - pusb2422->CFG3.bit.STRING_EN = 1; // strings enabled - // pusb2422->NRD.bit.PORT2_NR = 0; // MCU is non-removable - pusb2422->MAXPB.reg = 20; // 0mA - pusb2422->HCMCB.reg = 20; // 0mA - pusb2422->MFRSL.reg = sizeof(MFRNAME) / sizeof(uint16_t); - pusb2422->PRDSL.reg = sizeof(PRDNAME) / sizeof(uint16_t); - pusb2422->SERSL.reg = serial_length; - memcpy(pusb2422->MFRSTR, MFRNAME, sizeof(MFRNAME)); - memcpy(pusb2422->PRDSTR, PRDNAME, sizeof(PRDNAME)); - memcpy(pusb2422->SERSTR, serial_use, serial_length * sizeof(uint16_t)); - // pusb2422->BOOSTUP.bit.BOOST=3; //upstream port - // pusb2422->BOOSTDOWN.bit.BOOST1=0; // extra port - // pusb2422->BOOSTDOWN.bit.BOOST2=2; //MCU is close - pusb2422->STCD.bit.USB_ATTACH = 1; - USB_write2422_block(); + USB2422_configure(); adc_extra = 0; DBGC(DC_USB_CONFIGURE_COMPLETE); } -uint16_t USB_active(void) { return (PORT->Group[USB2422_HUB_ACTIVE_GROUP].IN.reg & (1 << USB2422_HUB_ACTIVE_PIN)) != 0; } +uint16_t USB_active(void) { return USB2422_active(); } void USB_set_host_by_voltage(void) { // UP is upstream device (HOST) @@ -314,7 +228,7 @@ void USB_set_host_by_voltage(void) { DBGC(DC_USB_SET_HOST_BY_VOLTAGE_COMPLETE); } -uint8_t USB2422_Port_Detect_Init(void) { +uint8_t USB_Hub_Port_Detect_Init(void) { uint32_t port_detect_retry_ms; uint32_t tmod; diff --git a/tmk_core/protocol/arm_atsam/usb/usb_hub.h b/tmk_core/protocol/arm_atsam/usb/usb_hub.h new file mode 100644 index 0000000000..76b1e0a326 --- /dev/null +++ b/tmk_core/protocol/arm_atsam/usb/usb_hub.h @@ -0,0 +1,51 @@ +/* +Copyright 2018 Massdrop Inc. + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef _USB2422_H_ +#define _USB2422_H_ + +#define REV_USB2422 0x100 + +#define PORT_DETECT_RETRY_INTERVAL 2000 + +#define USB_EXTRA_ADC_THRESHOLD 900 + +#define USB_EXTRA_STATE_DISABLED 0 +#define USB_EXTRA_STATE_ENABLED 1 +#define USB_EXTRA_STATE_UNKNOWN 2 +#define USB_EXTRA_STATE_DISABLED_UNTIL_REPLUG 3 + +#define USB_HOST_PORT_1 0 +#define USB_HOST_PORT_2 1 +#define USB_HOST_PORT_UNKNOWN 2 + +extern uint8_t usb_host_port; +extern uint8_t usb_extra_state; +extern uint8_t usb_extra_manual; +extern uint8_t usb_gcr_auto; + +void USB_Hub_init(void); +uint8_t USB_Hub_Port_Detect_Init(void); +void USB_reset(void); +void USB_configure(void); +uint16_t USB_active(void); +void USB_set_host_by_voltage(void); +uint16_t adc_get(uint8_t muxpos); +void USB_HandleExtraDevice(void); +void USB_ExtraSetState(uint8_t state); + +#endif //_USB2422_H_ From 3979137995e32491ddebc48eab991a4dfdccc02f Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Fri, 22 Oct 2021 13:32:14 +0000 Subject: [PATCH 320/595] Pteron36 Refactor (#14904) * reformat info.json - friendly-format info.json - move the right half to the left by 0.5u (improves readability, for me anyway) - correct key sequence * refactor default keymap - use short-form keycodes - use four-space indent * refactor via keymap - use short-form keycodes - use four-space indent * update maintainer field in info.json Use the maintainer's GitHub username. * readme touch-up Minor edit to the lead paragraph, and reformat the Hardware Availability section. * change BOOTMAGIC_ENABLE from `lite` to `yes` --- keyboards/pteron36/info.json | 88 ++++++++++++++++++- keyboards/pteron36/keymaps/default/keymap.c | 13 +-- keyboards/pteron36/keymaps/via/keymap.c | 95 +++++++++++---------- keyboards/pteron36/readme.md | 5 +- keyboards/pteron36/rules.mk | 2 +- 5 files changed, 144 insertions(+), 59 deletions(-) diff --git a/keyboards/pteron36/info.json b/keyboards/pteron36/info.json index b493879bf2..e191dc616f 100644 --- a/keyboards/pteron36/info.json +++ b/keyboards/pteron36/info.json @@ -1,13 +1,95 @@ { "keyboard_name": "Pteron36", "url": "", - "maintainer": "Harshit Goel", + "maintainer": "harshitgoel96", "layouts": { "LAYOUT_split_3x5_3": { - "layout": [{"x":2, "y":0}, {"x":12.5, "y":0}, {"x":1, "y":0.5}, {"x":3, "y":0.5}, {"x":11.5, "y":0.5}, {"x":13.5, "y":0.5}, {"x":4, "y":0.75}, {"x":10.5, "y":0.75}, {"x":0, "y":1}, {"x":2, "y":1}, {"x":12.5, "y":1}, {"x":14.5, "y":1}, {"x":1, "y":1.5}, {"x":3, "y":1.5}, {"x":11.5, "y":1.5}, {"x":13.5, "y":1.5}, {"x":4, "y":1.75}, {"x":10.5, "y":1.75}, {"x":0, "y":2}, {"x":2, "y":2}, {"x":12.5, "y":2}, {"x":14.5, "y":2}, {"x":1, "y":2.5}, {"x":3, "y":2.5}, {"x":11.5, "y":2.5}, {"x":13.5, "y":2.5}, {"x":4, "y":2.75}, {"x":10.5, "y":2.75}, {"x":0, "y":3}, {"x":14.5, "y":3}, {"x":4, "y":4}, {"x":5, "y":4}, {"x":6, "y":4}, {"x":8.5, "y":4}, {"x":9.5, "y":4}, {"x":10.5, "y":4}] + "layout": [ + {"x":0, "y":1}, + {"x":1, "y":0.5}, + {"x":2, "y":0}, + {"x":3, "y":0.5}, + {"x":4, "y":0.75}, + {"x":10, "y":0.75}, + {"x":11, "y":0.5}, + {"x":12, "y":0}, + {"x":13, "y":0.5}, + {"x":14, "y":1}, + + {"x":0, "y":2}, + {"x":1, "y":1.5}, + {"x":2, "y":1}, + {"x":3, "y":1.5}, + {"x":4, "y":1.75}, + {"x":10, "y":1.75}, + {"x":11, "y":1.5}, + {"x":12, "y":1}, + {"x":13, "y":1.5}, + {"x":14, "y":2}, + + {"x":0, "y":3}, + {"x":1, "y":2.5}, + {"x":2, "y":2}, + {"x":3, "y":2.5}, + {"x":4, "y":2.75}, + {"x":10, "y":2.75}, + {"x":11, "y":2.5}, + {"x":12, "y":2}, + {"x":13, "y":2.5}, + {"x":14, "y":3}, + + {"x":4, "y":4}, + {"x":5, "y":4}, + {"x":6, "y":4}, + {"x":8, "y":4}, + {"x":9, "y":4}, + {"x":10, "y":4} + ] }, "LAYOUT_split_3x5_3_encoder": { - "layout": [{"x":2, "y":0}, {"x":12.5, "y":0}, {"x":1, "y":0.5}, {"x":3, "y":0.5}, {"x":11.5, "y":0.5}, {"x":13.5, "y":0.5}, {"x":4, "y":0.75}, {"x":10.5, "y":0.75}, {"x":0, "y":1}, {"x":2, "y":1}, {"x":12.5, "y":1}, {"x":14.5, "y":1}, {"x":1, "y":1.5}, {"x":3, "y":1.5}, {"x":11.5, "y":1.5}, {"x":13.5, "y":1.5}, {"x":4, "y":1.75}, {"x":10.5, "y":1.75}, {"x":0, "y":2}, {"x":2, "y":2}, {"x":12.5, "y":2}, {"x":14.5, "y":2}, {"x":1, "y":2.5}, {"x":3, "y":2.5}, {"x":11.5, "y":2.5}, {"x":13.5, "y":2.5}, {"x":4, "y":2.75}, {"label":"enc1", "x":5.5, "y":2.75}, {"label":"enc2", "x":9, "y":2.75}, {"x":10.5, "y":2.75}, {"x":0, "y":3}, {"x":14.5, "y":3}, {"x":4, "y":4}, {"x":5, "y":4}, {"x":6, "y":4}, {"x":8.5, "y":4}, {"x":9.5, "y":4}, {"x":10.5, "y":4}] + "layout": [ + {"x":0, "y":1}, + {"x":1, "y":0.5}, + {"x":2, "y":0}, + {"x":3, "y":0.5}, + {"x":4, "y":0.75}, + {"x":10, "y":0.75}, + {"x":11, "y":0.5}, + {"x":12, "y":0}, + {"x":13, "y":0.5}, + {"x":14, "y":1}, + + {"x":0, "y":2}, + {"x":1, "y":1.5}, + {"x":2, "y":1}, + {"x":3, "y":1.5}, + {"x":4, "y":1.75}, + {"x":10, "y":1.75}, + {"x":11, "y":1.5}, + {"x":12, "y":1}, + {"x":13, "y":1.5}, + {"x":14, "y":2}, + + {"x":0, "y":3}, + {"x":1, "y":2.5}, + {"x":2, "y":2}, + {"x":3, "y":2.5}, + {"x":4, "y":2.75}, + {"label":"enc1", "x":5.5, "y":2.75}, + {"label":"enc2", "x":8.5, "y":2.75}, + {"x":10, "y":2.75}, + {"x":11, "y":2.5}, + {"x":12, "y":2}, + {"x":13, "y":2.5}, + {"x":14, "y":3}, + + {"x":4, "y":4}, + {"x":5, "y":4}, + {"x":6, "y":4}, + {"x":8, "y":4}, + {"x":9, "y":4}, + {"x":10, "y":4} + ] } } } diff --git a/keyboards/pteron36/keymaps/default/keymap.c b/keyboards/pteron36/keymaps/default/keymap.c index 0cc0e2b471..14b4e5979b 100644 --- a/keyboards/pteron36/keymaps/default/keymap.c +++ b/keyboards/pteron36/keymaps/default/keymap.c @@ -27,9 +27,10 @@ enum custom_keycodes { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_QWERTY] = LAYOUT_split_3x5_3_encoder( - KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, - KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, - KC_Z, KC_X, KC_C, KC_V, KC_B,KC_LBRACKET, KC_RBRACKET, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, - KC_LGUI, KC_BSPC, KC_SPC, KC_SPC, KC_ENT, KC_RALT - )}; + [_QWERTY] = LAYOUT_split_3x5_3_encoder( + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, + KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, + KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LBRC, KC_RBRC, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, + KC_LGUI, KC_BSPC, KC_SPC, KC_SPC, KC_ENT, KC_RALT + ) +}; diff --git a/keyboards/pteron36/keymaps/via/keymap.c b/keyboards/pteron36/keymaps/via/keymap.c index 9e467dcde5..ce96ea6c59 100644 --- a/keyboards/pteron36/keymaps/via/keymap.c +++ b/keyboards/pteron36/keymaps/via/keymap.c @@ -33,53 +33,54 @@ enum layer_names { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_QWERTY] = LAYOUT_split_3x5_3_encoder( - KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, - KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, - KC_Z, KC_X, KC_C, KC_V, KC_B,KC_LBRACKET, KC_RBRACKET, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, - KC_LGUI, KC_BSPC, KC_SPC, KC_SPC, KC_ENT, KC_RALT - ), - - [_SYMB] = LAYOUT_split_3x5_3_encoder( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ), - - [_NAV] = LAYOUT_split_3x5_3_encoder( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ), - - [_ADJUST] = LAYOUT_split_3x5_3_encoder( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ), - [_MOUSE] = LAYOUT_split_3x5_3_encoder( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ), - - [_NUMB] = LAYOUT_split_3x5_3_encoder( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ), - - [_FNR] = LAYOUT_split_3x5_3_encoder( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - ) + [_QWERTY] = LAYOUT_split_3x5_3_encoder( + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, + KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, + KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LBRC, KC_RBRC, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, + KC_LGUI, KC_BSPC, KC_SPC, KC_SPC, KC_ENT, KC_RALT + ), + + [_SYMB] = LAYOUT_split_3x5_3_encoder( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + [_NAV] = LAYOUT_split_3x5_3_encoder( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + [_ADJUST] = LAYOUT_split_3x5_3_encoder( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + [_MOUSE] = LAYOUT_split_3x5_3_encoder( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + [_NUMB] = LAYOUT_split_3x5_3_encoder( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + [_FNR] = LAYOUT_split_3x5_3_encoder( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) }; diff --git a/keyboards/pteron36/readme.md b/keyboards/pteron36/readme.md index a68c7a55b4..0e430db243 100644 --- a/keyboards/pteron36/readme.md +++ b/keyboards/pteron36/readme.md @@ -2,11 +2,12 @@ ![Pteron36](https://i.imgur.com/PuXPWYfh.jpg) -A 36 key keyboard with a bit more natural thumb cluster. +A 36-key keyboard with a bit more natural thumb cluster. * Keyboard Maintainer: [Harshit Goel](https://github.com/harshitgoel96) * Hardware Supported: Pteron36 using promicro. -* Hardware Availability: Hardware is opensource, you can simply send the gerber to a PCB manufacturere and them made. File are availalbe in [pteron36 repository](https://github.com/harshitgoel96/pteron36-split-keyboard/releases/tag/v1.2.0) +* Hardware Availability: Files are available in the [pteron36 repository](https://github.com/harshitgoel96/pteron36-split-keyboard/releases/tag/v1.2.0) + * The hardware is open source; you can simply send the Gerber to a PCB manufacturer and have them made. Make example for this keyboard (after setting up your build environment): diff --git a/keyboards/pteron36/rules.mk b/keyboards/pteron36/rules.mk index 278246b371..a12be26351 100644 --- a/keyboards/pteron36/rules.mk +++ b/keyboards/pteron36/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug From 1e13d07cac92946262be2a8e6e1d497b6e3a6f1c Mon Sep 17 00:00:00 2001 From: Danny Date: Fri, 22 Oct 2021 10:12:35 -0400 Subject: [PATCH 321/595] Fix right half of Nyquist in 4x12 mode having row shifted up by one (#14914) --- keyboards/keebio/nyquist/rev3/rev3.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/keyboards/keebio/nyquist/rev3/rev3.h b/keyboards/keebio/nyquist/rev3/rev3.h index 506fcc6e36..e365c0e417 100644 --- a/keyboards/keebio/nyquist/rev3/rev3.h +++ b/keyboards/keebio/nyquist/rev3/rev3.h @@ -42,10 +42,12 @@ { L10, L11, L12, L13, L14, L15 }, \ { L20, L21, L22, L23, L24, L25 }, \ { L30, L31, L32, L33, L34, L35 }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ { R00, R01, R02, R03, R04, R05 }, \ { R10, R11, R12, R13, R14, R15 }, \ { R20, R21, R22, R23, R24, R25 }, \ - { R30, R31, R32, R33, R34, R35 } \ + { R30, R31, R32, R33, R34, R35 }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO } \ } #define LAYOUT_ortho_5x12 LAYOUT From 1953a968c51630cc2badfade9ee54f59c878b422 Mon Sep 17 00:00:00 2001 From: Dasky <32983009+daskygit@users.noreply.github.com> Date: Sat, 23 Oct 2021 05:04:15 +0100 Subject: [PATCH 322/595] Check usb transmit status in send_extra() (#14643) --- tmk_core/protocol/chibios/usb_main.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/tmk_core/protocol/chibios/usb_main.c b/tmk_core/protocol/chibios/usb_main.c index cc282e6a9b..04049c1a9a 100644 --- a/tmk_core/protocol/chibios/usb_main.c +++ b/tmk_core/protocol/chibios/usb_main.c @@ -921,6 +921,17 @@ static void send_extra(uint8_t report_id, uint16_t data) { return; } + if (usbGetTransmitStatusI(&USB_DRIVER, SHARED_IN_EPNUM)) { + /* Need to either suspend, or loop and call unlock/lock during + * every iteration - otherwise the system will remain locked, + * no interrupts served, so USB not going through as well. + * Note: for suspend, need USB_USE_WAIT == TRUE in halconf.h */ + if (osalThreadSuspendTimeoutS(&(&USB_DRIVER)->epc[SHARED_IN_EPNUM]->in_state->thread, TIME_MS2I(10)) == MSG_TIMEOUT) { + osalSysUnlock(); + return; + } + } + static report_extra_t report; report = (report_extra_t){.report_id = report_id, .usage = data}; From b9c9f3759a63e4bfd1b2a6f8c3b407426f38ee84 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Sat, 23 Oct 2021 05:17:07 +0100 Subject: [PATCH 323/595] Remove legacy handling for ErgoDox Infinity handedness (#14919) --- build_keyboard.mk | 14 -------------- keyboards/ergodox_infinity/readme.md | 24 +++++------------------- 2 files changed, 5 insertions(+), 33 deletions(-) diff --git a/build_keyboard.mk b/build_keyboard.mk index e5edacfd8a..c1f4f93381 100644 --- a/build_keyboard.mk +++ b/build_keyboard.mk @@ -32,20 +32,6 @@ endif # this an empty or blank macro! KEYMAP_OUTPUT := $(BUILD_DIR)/obj_$(TARGET) -# For split boards we need to set a master half. -MASTER ?= left -ifdef master - MASTER = $(master) -endif - -ifeq ($(MASTER),right) - OPT_DEFS += -DMASTER_IS_ON_RIGHT -else - ifneq ($(MASTER),left) -$(error MASTER does not have a valid value(left/right)) - endif -endif - ifdef SKIP_VERSION OPT_DEFS += -DSKIP_VERSION endif diff --git a/keyboards/ergodox_infinity/readme.md b/keyboards/ergodox_infinity/readme.md index 73ee3bc1df..c51bdd7c82 100644 --- a/keyboards/ergodox_infinity/readme.md +++ b/keyboards/ergodox_infinity/readme.md @@ -13,18 +13,16 @@ for the left and right halves seperately. To flash them: - Install the firmware with `sudo make ergodox_infinity:keymapname:dfu-util` - - Build right hand firmware with `make ergodox_infinity:keymapname MASTER=right` - - Plug in the right hand keyboard only. - Press the program button (back of keyboard, above thumb pad). - - Install the firmware with `sudo make ergodox_infinity:keymapname:dfu-util MASTER=right` + - Install the firmware with `sudo make ergodox_infinity:keymapname:dfu-util` More information on the Infinity firmware is available in the [TMK/chibios for Input Club Infinity Ergodox](https://github.com/fredizzimo/infinity_ergodox/blob/master/README.md) -## Infinity Master/Two Halves +## Infinity Two Halves The Infinity is two completely independent keyboards, that can connect together. You have a few options in how you flash the firmware: @@ -32,21 +30,10 @@ You have a few options in how you flash the firmware: - Add `#define EE_HANDS` to your config.h, initialize the EEPROM values (see below), and then flash the same firmware to both halves. -- Flash the left half, rebuild the firmware with "MASTER=right" and then flash - the right half. This allows you to plug in either half directly to the - computer and is what the above instructions do. - -- Flash the left half, then flash the same firmware on the right. This only - works when the left half is plugged directly to the computer and the keymap - is mirrored. It saves the small extra step of rebuilding with - "MASTER=right". - -- The same as the previous one but with "MASTER=right" when you build the - firmware, then flash the same firmware to both halves. You just have to - directly connect the right half to the computer. +- Flash with the instructions above, which assume the left hand is connected to USB. - For minor changes such as changing only the keymap without having updated - any part of the firmware code itself, you can program only the MASTER half, + any part of the firmware code itself, you can program only the half connected to USB, but it is safest to program both halves. ### EE_HANDS initialization @@ -74,7 +61,6 @@ They only need to be done once, unless you reset the EEPROM later. - Add `#define EE_HANDS` to the config.h file of your keymap, and build your firmware using `make ergodox_infinity:keymapname`. - - After this, you can flash both halves with the same firmware, _without_ having to rebuild with - "MASTER=right" or risking a mirrored keyboard when connected the wrong way. + - After this, you can flash both halves with the same firmware, _without_ risking a mirrored keyboard when connected the wrong way. If you reset your EEPROM later, you'll have to follow these steps again, though. From 8ec1afd17ce1fdc9aa217c1e8ea2e5b5f0decf4b Mon Sep 17 00:00:00 2001 From: TW59420 <40019210+TW59420@users.noreply.github.com> Date: Sat, 23 Oct 2021 13:05:23 +0800 Subject: [PATCH 324/595] [Keyboard] Add MW75 support (#14833) --- keyboards/mwstudio/mw75/config.h | 75 ++++++++++++++ keyboards/mwstudio/mw75/info.json | 99 +++++++++++++++++++ .../mwstudio/mw75/keymaps/default/keymap.c | 57 +++++++++++ keyboards/mwstudio/mw75/keymaps/via/keymap.c | 57 +++++++++++ keyboards/mwstudio/mw75/keymaps/via/rules.mk | 2 + keyboards/mwstudio/mw75/mw75.c | 47 +++++++++ keyboards/mwstudio/mw75/mw75.h | 36 +++++++ keyboards/mwstudio/mw75/readme.md | 22 +++++ keyboards/mwstudio/mw75/rules.mk | 24 +++++ keyboards/mwstudio/readme.md | 5 + 10 files changed, 424 insertions(+) create mode 100644 keyboards/mwstudio/mw75/config.h create mode 100644 keyboards/mwstudio/mw75/info.json create mode 100644 keyboards/mwstudio/mw75/keymaps/default/keymap.c create mode 100644 keyboards/mwstudio/mw75/keymaps/via/keymap.c create mode 100644 keyboards/mwstudio/mw75/keymaps/via/rules.mk create mode 100644 keyboards/mwstudio/mw75/mw75.c create mode 100644 keyboards/mwstudio/mw75/mw75.h create mode 100644 keyboards/mwstudio/mw75/readme.md create mode 100644 keyboards/mwstudio/mw75/rules.mk create mode 100644 keyboards/mwstudio/readme.md diff --git a/keyboards/mwstudio/mw75/config.h b/keyboards/mwstudio/mw75/config.h new file mode 100644 index 0000000000..58fcdf2c7c --- /dev/null +++ b/keyboards/mwstudio/mw75/config.h @@ -0,0 +1,75 @@ +/* Copyright 2021 TW59420 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "config_common.h" + + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x7BA1 +#define PRODUCT_ID 0x7501 +#define DEVICE_VER 0x0001 +#define MANUFACTURER MWStudio +#define PRODUCT MW75 + +/* key matrix size */ +#define MATRIX_ROWS 7 +#define MATRIX_COLS 15 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { B7, D0, D1, D2, D3, D5, B0} +#define MATRIX_COL_PINS { D4, D6, D7, B4, B5, B6, C6, C7, F7, F6, F5, F4, F1, F0, E6 } + +#define BOOTMAGIC_LITE_ROW 0 +#define BOOTMAGIC_LITE_COLUMN 1 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +#define RGB_DI_PIN B3 +#define RGBLIGHT_SLEEP + +#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 +#define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS +#define DRIVER_LED_TOTAL 97 +#define RGBLED_NUM 97 +#define RGB_MATRIX_KEYPRESSES + +// #define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN +// #define DISABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +// #define DISABLE_RGB_MATRIX_TYPING_HEATMAP +// #define DISABLE_RGB_MATRIX_DIGITAL_RAIN +// #define DISABLE_RGB_MATRIX_BAND_SAT +// #define DISABLE_RGB_MATRIX_BAND_VAL +// #define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +// #define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +// #define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT +// #define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL + +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 + +#define ENCODERS_PAD_A { B1 } +#define ENCODERS_PAD_B { B2 } diff --git a/keyboards/mwstudio/mw75/info.json b/keyboards/mwstudio/mw75/info.json new file mode 100644 index 0000000000..0c53689865 --- /dev/null +++ b/keyboards/mwstudio/mw75/info.json @@ -0,0 +1,99 @@ +{ + "keyboard_name": "MW75", + "url": "", + "maintainer": "qmk", + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":1.5, "y":0}, + {"label":"F2", "x":2.5, "y":0}, + {"label":"F3", "x":3.5, "y":0}, + {"label":"F4", "x":4.5, "y":0}, + {"label":"F5", "x":6, "y":0}, + {"label":"F6", "x":7, "y":0}, + {"label":"F7", "x":8, "y":0}, + {"label":"F8", "x":9, "y":0}, + {"label":"F9", "x":10.5, "y":0}, + {"label":"F10", "x":11.5, "y":0}, + {"label":"F11", "x":12.5, "y":0}, + {"label":"F12", "x":13.5, "y":0}, + {"label":"DEL", "x":15, "y":0}, + + {"label":"`", "x":0, "y":1.5}, + {"label":"1", "x":1, "y":1.5}, + {"label":"2", "x":2, "y":1.5}, + {"label":"3", "x":3, "y":1.5}, + {"label":"4", "x":4, "y":1.5}, + {"label":"5", "x":5, "y":1.5}, + {"label":"6", "x":6, "y":1.5}, + {"label":"7", "x":7, "y":1.5}, + {"label":"8", "x":8, "y":1.5}, + {"label":"9", "x":9, "y":1.5}, + {"label":"0", "x":10, "y":1.5}, + {"label":"-", "x":11, "y":1.5}, + {"label":"=", "x":12, "y":1.5}, + {"label":"Backspace", "x":13, "y":1.5, "w":2}, + {"label":"Delete", "x":15, "y":1.5}, + + {"label":"Tab", "x":0, "y":2.5, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.5}, + {"label":"W", "x":2.5, "y":2.5}, + {"label":"E", "x":3.5, "y":2.5}, + {"label":"R", "x":4.5, "y":2.5}, + {"label":"T", "x":5.5, "y":2.5}, + {"label":"Y", "x":6.5, "y":2.5}, + {"label":"U", "x":7.5, "y":2.5}, + {"label":"I", "x":8.5, "y":2.5}, + {"label":"O", "x":9.5, "y":2.5}, + {"label":"P", "x":10.5, "y":2.5}, + {"label":"[", "x":11.5, "y":2.5}, + {"label":"]", "x":12.5, "y":2.5}, + {"label":"\\", "x":13.5, "y":2.5, "w":1.5}, + {"label":"PgUp", "x":15, "y":2.5}, + + {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, + {"label":"A", "x":1.75, "y":3.5}, + {"label":"S", "x":2.75, "y":3.5}, + {"label":"D", "x":3.75, "y":3.5}, + {"label":"F", "x":4.75, "y":3.5}, + {"label":"G", "x":5.75, "y":3.5}, + {"label":"H", "x":6.75, "y":3.5}, + {"label":"J", "x":7.75, "y":3.5}, + {"label":"K", "x":8.75, "y":3.5}, + {"label":"L", "x":9.75, "y":3.5}, + {"label":";", "x":10.75, "y":3.5}, + {"label":"'", "x":11.75, "y":3.5}, + {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, + {"label":"PgDn", "x":15, "y":3.5}, + + {"label":"Shift", "x":0, "y":4.5, "w":2.25}, + {"label":"Z", "x":2.25, "y":4.5}, + {"label":"X", "x":3.25, "y":4.5}, + {"label":"C", "x":4.25, "y":4.5}, + {"label":"V", "x":5.25, "y":4.5}, + {"label":"B", "x":6.25, "y":4.5}, + {"label":"N", "x":7.25, "y":4.5}, + {"label":"M", "x":8.25, "y":4.5}, + {"label":",", "x":9.25, "y":4.5}, + {"label":".", "x":10.25, "y":4.5}, + {"label":"/", "x":11.25, "y":4.5}, + {"label":"Shift", "x":12.25, "y":4.5, "w":1.75}, + {"label":"\u2191", "x":14, "y":4.5}, + {"label":"End", "x":15, "y":4.5}, + + {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, + {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, + {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, + {"label":"Vol-", "x":3.75, "y":5.5 }, + {"label":"Vol+", "x":4.75, "y":5.5 }, + {"x":5.75, "y":5.5, "w":4.25}, + {"label":"Alt", "x":10, "y":5.5, "w":1.25}, + {"label":"Fn", "x":11.25, "y":5.5, "w":1.25}, + {"label":"\u2190", "x":13, "y":5.5}, + {"label":"\u2193", "x":14, "y":5.5}, + {"label":"\u2192", "x":15, "y":5.5} + ] + } + } +} diff --git a/keyboards/mwstudio/mw75/keymaps/default/keymap.c b/keyboards/mwstudio/mw75/keymaps/default/keymap.c new file mode 100644 index 0000000000..44eb8d0c04 --- /dev/null +++ b/keyboards/mwstudio/mw75/keymaps/default/keymap.c @@ -0,0 +1,57 @@ +/* Copyright 2021 TW59420 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, RGB_TOG, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_VOLU, KC_VOLD, KC_SPACE, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT + ), + + [1] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_HUI, + RGB_TOG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_HUD, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_SAI, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAI, RGB_SAD, + _______, _______, _______, _______, _______, _______, RGB_MOD, _______, RGB_SPD, RGB_VAD, RGB_SPI + ), + + [2] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [3] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; diff --git a/keyboards/mwstudio/mw75/keymaps/via/keymap.c b/keyboards/mwstudio/mw75/keymaps/via/keymap.c new file mode 100644 index 0000000000..44eb8d0c04 --- /dev/null +++ b/keyboards/mwstudio/mw75/keymaps/via/keymap.c @@ -0,0 +1,57 @@ +/* Copyright 2021 TW59420 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, RGB_TOG, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_VOLU, KC_VOLD, KC_SPACE, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT + ), + + [1] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_HUI, + RGB_TOG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_HUD, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_SAI, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAI, RGB_SAD, + _______, _______, _______, _______, _______, _______, RGB_MOD, _______, RGB_SPD, RGB_VAD, RGB_SPI + ), + + [2] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [3] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; diff --git a/keyboards/mwstudio/mw75/keymaps/via/rules.mk b/keyboards/mwstudio/mw75/keymaps/via/rules.mk new file mode 100644 index 0000000000..36b7ba9cbc --- /dev/null +++ b/keyboards/mwstudio/mw75/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/mwstudio/mw75/mw75.c b/keyboards/mwstudio/mw75/mw75.c new file mode 100644 index 0000000000..7e6641d5db --- /dev/null +++ b/keyboards/mwstudio/mw75/mw75.c @@ -0,0 +1,47 @@ +/* Copyright 2021 TW59420 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "mw75.h" + +#ifdef RGB_MATRIX_ENABLE +led_config_t g_led_config = { { + { 81, 80, 79, 78, 77, 76, 75, 74, 73, 72, 71, 70, 69, 68, 67 }, + { 66, 65, 64, 63, 62, 61, 60, 59, 58, 57, 56, 55, 54, 53, 52 }, + { 51, 50, 49, 48, 47, 46, 45, 44, 43, 42, 41, 40, 39, 38, 37 }, + { 36, 35, 34, 33, 32, 31, 30, 29, 28, 27, 26, 25, NO_LED, 24, 23 }, + { 22, NO_LED, 21, 20, 19, 18, 17, 16, 15, 14, 13, 12, 11, 10, 9 }, + { 8, 7, 6, NO_LED, NO_LED, NO_LED, 5, NO_LED, NO_LED, NO_LED, 4, 3, 2, 1, 0 }, + { 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96 } +}, { + { 217, 60 }, { 203, 60 }, { 189, 60 }, { 166, 60 }, { 150, 60 }, { 95, 60 }, { 40, 60 }, { 24, 60 }, { 8, 60 }, + { 217, 50 }, { 203, 50 }, { 184, 50 }, { 165, 50 }, { 151, 50 }, { 137, 50 }, { 123, 50 }, { 109, 50 }, { 95, 50 }, { 81, 50 }, { 67, 50 }, { 53, 50 }, { 39, 50 }, { 17, 50 }, + { 217, 40 }, { 195, 40 }, { 172, 40 }, { 158, 40 }, { 144, 40 }, { 130, 40 }, { 116, 40 }, { 102, 40 }, { 88, 40 }, { 74, 40 }, { 60, 40 }, { 46, 40 }, { 32, 40 }, { 13, 40 }, + { 217, 30 }, { 199, 30 }, { 181, 30 }, { 165, 30 }, { 151, 30 }, { 137, 30 }, { 123, 30 }, { 109, 30 }, { 95, 30 }, { 81, 30 }, { 67, 30 }, { 53, 30 }, { 39, 30 }, { 25, 30 }, { 9, 30 }, + { 217, 20 }, { 196, 20 }, { 175, 20 }, { 161, 20 }, { 147, 20 }, { 133, 20 }, { 119, 20 }, { 105, 20 }, { 91, 20 }, { 77, 20 }, { 63, 20 }, { 49, 20 }, { 35, 20 }, { 21, 20 }, { 7, 20 }, + { 217, 5 }, { 196, 5 }, { 182, 5 }, { 168, 5 }, { 154, 5 }, { 133, 5 }, { 119, 5 }, { 105, 5 }, { 91, 5 }, { 70, 5 }, { 56, 5 }, { 42, 5 }, { 28, 5 }, { 7, 5 }, + + { 14, 14 }, { 42, 14 }, { 98, 14 }, { 154, 14 }, { 182, 14 }, { 210, 14 }, { 210, 25 }, { 210, 40 }, + { 210, 55 },{ 182, 55 },{ 126, 55 },{ 98, 55 }, { 42, 55 }, { 14, 55 }, { 14, 40 }, { 14, 25 } +}, { + 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 +} }; +#endif diff --git a/keyboards/mwstudio/mw75/mw75.h b/keyboards/mwstudio/mw75/mw75.h new file mode 100644 index 0000000000..a322ed4a1b --- /dev/null +++ b/keyboards/mwstudio/mw75/mw75.h @@ -0,0 +1,36 @@ +/* Copyright 2021 TW59420 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +#define LAYOUT( \ + K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014,\ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114,\ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214,\ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K314,\ + K400, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414,\ + K500, K501, K502, K503, K504, K506, K510, K511, K512, K513, K514\ +) { \ + { KC_NO, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 },\ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 },\ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214 },\ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, K314 },\ + { K400, KC_NO, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414 },\ + { K500, K501, K502, K503, K504, KC_NO, K506, KC_NO, KC_NO, KC_NO, K510, K511, K512, K513, K514 },\ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO } \ +} diff --git a/keyboards/mwstudio/mw75/readme.md b/keyboards/mwstudio/mw75/readme.md new file mode 100644 index 0000000000..ecabf568aa --- /dev/null +++ b/keyboards/mwstudio/mw75/readme.md @@ -0,0 +1,22 @@ +# MW75 + +![MW75](https://i.imgur.com/TdVxYNE.jpg?2) + +Support Atmega32u4 keyboard. + +* Keyboard Maintainer: [TW59420](https://github.com/TW59420) +* Hardware Supported: Atmega32u4 + +Make example for this keyboard (after setting up your build environment): + + make mwstudio/mw75:default + +Flashing example for this keyboard: + + make mwstudio/mw75:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader +* **Physical reset button**: Short press the button on the back of the PCB to enter the Bootloader and flash the firmware +* **Keycode in layout**: Press the key mapped to RESET if it is available diff --git a/keyboards/mwstudio/mw75/rules.mk b/keyboards/mwstudio/mw75/rules.mk new file mode 100644 index 0000000000..58d8da3e89 --- /dev/null +++ b/keyboards/mwstudio/mw75/rules.mk @@ -0,0 +1,24 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +RGB_MATRIX_ENABLE = yes +RGB_MATRIX_DRIVER = WS2812 +ENCODER_ENABLE = yes diff --git a/keyboards/mwstudio/readme.md b/keyboards/mwstudio/readme.md new file mode 100644 index 0000000000..d4433a8c96 --- /dev/null +++ b/keyboards/mwstudio/readme.md @@ -0,0 +1,5 @@ +# MWStudio pcb + +This is a series of PCB +* MW75 The chip is ATmega32U4 + From d71c962b61d638e38a449719401695bdc4fb6257 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=C3=81lvaro=20A=2E=20Volpato?= Date: Sat, 23 Oct 2021 02:58:52 -0300 Subject: [PATCH 325/595] [Keyboard] Update encoder callback on Evolv75 (#14757) Co-authored-by: Ryan --- keyboards/evolv/config.h | 2 ++ keyboards/evolv/evolv.c | 12 +++++------- keyboards/evolv/keymaps/default/keymap.c | 2 ++ keyboards/evolv/keymaps/iso/keymap.c | 2 ++ keyboards/evolv/keymaps/via/keymap.c | 2 ++ keyboards/evolv/mcuconf.h | 4 ---- keyboards/evolv/rules.mk | 6 +++--- 7 files changed, 16 insertions(+), 14 deletions(-) diff --git a/keyboards/evolv/config.h b/keyboards/evolv/config.h index 2b91033c98..59223cd2c9 100644 --- a/keyboards/evolv/config.h +++ b/keyboards/evolv/config.h @@ -59,6 +59,8 @@ along with this program. If not, see . #define ENCODERS_PAD_A { B3 } #define ENCODERS_PAD_B { A15 } +#define ENCODER_RESOLUTION 2 +#define TAPPING_TERM 200 /* * Feature disable options diff --git a/keyboards/evolv/evolv.c b/keyboards/evolv/evolv.c index 90df449ee2..3f27628946 100644 --- a/keyboards/evolv/evolv.c +++ b/keyboards/evolv/evolv.c @@ -17,14 +17,12 @@ along with this program. If not, see . #include "evolv.h" +#ifndef MEDIA_KEY_DELAY +# define MEDIA_KEY_DELAY 100 +#endif + bool encoder_update_kb(uint8_t index, bool clockwise) { if (!encoder_update_user(index, clockwise)) return false; - if (index == 0) { /* First encoder */ - if (clockwise) { - tap_code(KC_VOLU); - } else { - tap_code(KC_VOLD); - } - } + tap_code_delay(clockwise ? KC_VOLU : KC_VOLD, MEDIA_KEY_DELAY); return true; } diff --git a/keyboards/evolv/keymaps/default/keymap.c b/keyboards/evolv/keymaps/default/keymap.c index 5e5e5e7abb..2286627041 100755 --- a/keyboards/evolv/keymaps/default/keymap.c +++ b/keyboards/evolv/keymaps/default/keymap.c @@ -17,6 +17,8 @@ along with this program. If not, see . #include QMK_KEYBOARD_H +#define MEDIA_KEY_DELAY 100 + const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_evolv_ansi( KC_ESC , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11 , KC_F12 , KC_INS , diff --git a/keyboards/evolv/keymaps/iso/keymap.c b/keyboards/evolv/keymaps/iso/keymap.c index 4efe8268d3..391bcdf5bb 100755 --- a/keyboards/evolv/keymaps/iso/keymap.c +++ b/keyboards/evolv/keymaps/iso/keymap.c @@ -17,6 +17,8 @@ along with this program. If not, see . #include QMK_KEYBOARD_H +#define MEDIA_KEY_DELAY 100 + const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_evolv_iso( KC_ESC , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11 , KC_F12 , KC_INS , diff --git a/keyboards/evolv/keymaps/via/keymap.c b/keyboards/evolv/keymaps/via/keymap.c index 4efe8268d3..391bcdf5bb 100755 --- a/keyboards/evolv/keymaps/via/keymap.c +++ b/keyboards/evolv/keymaps/via/keymap.c @@ -17,6 +17,8 @@ along with this program. If not, see . #include QMK_KEYBOARD_H +#define MEDIA_KEY_DELAY 100 + const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_evolv_iso( KC_ESC , KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 , KC_F10 , KC_F11 , KC_F12 , KC_INS , diff --git a/keyboards/evolv/mcuconf.h b/keyboards/evolv/mcuconf.h index 2836e4b01a..84d14114ff 100644 --- a/keyboards/evolv/mcuconf.h +++ b/keyboards/evolv/mcuconf.h @@ -23,9 +23,5 @@ #include_next -#undef STM32_I2C_USE_DMA -#define STM32_I2C_USE_DMA FALSE - #undef STM32_SPI_USE_SPI2 #define STM32_SPI_USE_SPI2 TRUE - diff --git a/keyboards/evolv/rules.mk b/keyboards/evolv/rules.mk index 380010c775..b0f7124c08 100644 --- a/keyboards/evolv/rules.mk +++ b/keyboards/evolv/rules.mk @@ -7,11 +7,11 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug -COMMAND_ENABLE = yes # Commands for debug and configuration +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work From 09daafd4898db3bfb206335b8a33d6ad87c3e58b Mon Sep 17 00:00:00 2001 From: jurassic73 <50930136+jurassic73@users.noreply.github.com> Date: Fri, 22 Oct 2021 23:03:49 -0700 Subject: [PATCH 326/595] Corrected keyboard layout which was causing issue in QMK configurator (#14891) --- .../handwired/split89/keymaps/default/keymap.c | 14 +++++++------- keyboards/handwired/split89/split89.h | 10 +++++----- 2 files changed, 12 insertions(+), 12 deletions(-) diff --git a/keyboards/handwired/split89/keymaps/default/keymap.c b/keyboards/handwired/split89/keymaps/default/keymap.c index 3b60ef4f68..5b2ed1740d 100644 --- a/keyboards/handwired/split89/keymaps/default/keymap.c +++ b/keyboards/handwired/split89/keymaps/default/keymap.c @@ -24,19 +24,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Base */ [0] = LAYOUT( KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, - KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, - KC_GRV, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, - KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_Y, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, - KC_CAPS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_H, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSHIFT, KC_UP, - KC_LSFT, KC_LCTL,MO(1),KC_LGUI,KC_LALT,KC_SPACE, KC_N, KC_SPACE, KC_RALT,KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + KC_GRV,KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB,KC_Q, KC_W, KC_E, KC_R, KC_T, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_Y, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_H, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSHIFT, KC_UP, + KC_LCTL,MO(1),KC_LGUI,KC_LALT,KC_SPACE, KC_N, KC_SPACE, KC_RALT,KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ), /* Volume */ [1] = LAYOUT( KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_VOLU, - KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_MEDIA_PLAY_PAUSE, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT + KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_MEDIA_PLAY_PAUSE, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT ), }; diff --git a/keyboards/handwired/split89/split89.h b/keyboards/handwired/split89/split89.h index d04f0296d7..44c0d0d702 100644 --- a/keyboards/handwired/split89/split89.h +++ b/keyboards/handwired/split89/split89.h @@ -28,11 +28,11 @@ */ #define LAYOUT( \ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, k14, k15, \ - k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k30, k31, \ - k32, k33, k34, k35, k36, k37, k38, k39, k40, k41, k42, k43, k44, k45, k46, k47, \ - k48, k49, k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k60, \ - k61, k62, k63, k64, k65, k66, k67, k68, k69, k70, k71, k72, k73, \ - k74, k75, k76, k77, k78, k79, k80, k81, k82, k83, k84, k85, k86, k87, k88 \ + k32, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k30, k31, \ + k48, k33, k34, k35, k36, k37, k38, k39, k40, k41, k42, k43, k44, k45, k46, k47, \ + k61, k49, k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k60, \ + k74, k62, k63, k64, k65, k66, k67, k68, k69, k70, k71, k72, k73, \ + k75, k76, k77, k78, k79, k80, k81, k82, k83, k84, k85, k86, k87, k88 \ ) \ { \ { KC_NO, KC_NO, KC_NO, KC_NO, k00, k01, k02, k03, k04, k05 }, \ From 443d30682761edf90c327a06a6dbf9badde99df5 Mon Sep 17 00:00:00 2001 From: jonavin <71780717+Jonavin@users.noreply.github.com> Date: Sat, 23 Oct 2021 02:04:08 -0400 Subject: [PATCH 327/595] [Keymap] Jonavin userspace keymap updates INVERT_NUMLOCK_INDICATOR (#14880) Co-authored-by: Jonavin <=> --- .../gmmk/pro/ansi/keymaps/jonavin/keymap.c | 17 ++++++--- .../gmmk/pro/ansi/keymaps/jonavin/readme.md | 3 ++ .../gmmk/pro/ansi/keymaps/jonavin/rules.mk | 1 + .../keebio/quefrency/keymaps/jonavin/keymap.c | 13 ++++++- .../quefrency/keymaps/jonavin/readme.md | 1 + .../keebio/quefrency/keymaps/jonavin/rules.mk | 1 + .../mechwild/obe/keymaps/jonavin/keymap.c | 35 +++++++++++-------- .../mechwild/obe/keymaps/jonavin/readme.md | 12 ++++--- .../mechwild/obe/keymaps/jonavin/rules.mk | 1 + users/jonavin/config.h | 1 + users/jonavin/jonavin.c | 12 +++++++ users/jonavin/jonavin.h | 4 +++ users/jonavin/readme.md | 14 +++++++- users/jonavin/rules.mk | 3 ++ 14 files changed, 93 insertions(+), 25 deletions(-) diff --git a/keyboards/gmmk/pro/ansi/keymaps/jonavin/keymap.c b/keyboards/gmmk/pro/ansi/keymaps/jonavin/keymap.c index f37abfac30..0d318885f4 100644 --- a/keyboards/gmmk/pro/ansi/keymaps/jonavin/keymap.c +++ b/keyboards/gmmk/pro/ansi/keymaps/jonavin/keymap.c @@ -124,10 +124,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { rgb_matrix_set_color(LED_L1, RGB_GREEN); rgb_matrix_set_color(LED_L2, RGB_GREEN); } - if (!IS_HOST_LED_ON(USB_LED_NUM_LOCK)) { // on if NUM lock is OFF - rgb_matrix_set_color(LED_L3, RGB_MAGENTA); - rgb_matrix_set_color(LED_L4, RGB_MAGENTA); - } + + #ifdef INVERT_NUMLOCK_INDICATOR + if (!IS_HOST_LED_ON(USB_LED_NUM_LOCK)) { // on if NUM lock is OFF + rgb_matrix_set_color(LED_L3, RGB_MAGENTA); + rgb_matrix_set_color(LED_L4, RGB_MAGENTA); + } + #else + if (IS_HOST_LED_ON(USB_LED_NUM_LOCK)) { // Normal, on if NUM lock is ON + rgb_matrix_set_color(LED_L3, RGB_MAGENTA); + rgb_matrix_set_color(LED_L4, RGB_MAGENTA); + } + #endif // INVERT_NUMLOCK_INDICATOR + if (IS_HOST_LED_ON(USB_LED_CAPS_LOCK)) { rgb_matrix_set_color(LED_L5, RGB_RED); rgb_matrix_set_color(LED_L6, RGB_RED); diff --git a/keyboards/gmmk/pro/ansi/keymaps/jonavin/readme.md b/keyboards/gmmk/pro/ansi/keymaps/jonavin/readme.md index 2aa910e0c7..6e8d6ba8a5 100644 --- a/keyboards/gmmk/pro/ansi/keymaps/jonavin/readme.md +++ b/keyboards/gmmk/pro/ansi/keymaps/jonavin/readme.md @@ -44,6 +44,9 @@ TD_LSFT_CAPSLOCK_ENABLE = yes IDLE_TIMEOUT_ENABLE = yes - Enables Timer functionality; for RGB idle timeouts that can be changed dynamically +INVERT_NUMLOCK_INDICATOR + - inverts the Num lock indicator, LED is on when num lokc is off + COLEMAK_LAYER_ENABLE = yes - Enabled optional 5th layer for COLEMAK layout - Use Shift and encoder to enter 5th layer, right led indicator lights up BLUE diff --git a/keyboards/gmmk/pro/ansi/keymaps/jonavin/rules.mk b/keyboards/gmmk/pro/ansi/keymaps/jonavin/rules.mk index 81b84eea7f..90ea42dee5 100644 --- a/keyboards/gmmk/pro/ansi/keymaps/jonavin/rules.mk +++ b/keyboards/gmmk/pro/ansi/keymaps/jonavin/rules.mk @@ -9,3 +9,4 @@ STARTUP_NUMLOCK_ON = yes ENCODER_DEFAULTACTIONS_ENABLE = no COLEMAK_LAYER_ENABLE = yes #Enable Colemak layer / set to no to disable +INVERT_NUMLOCK_INDICATOR = yes diff --git a/keyboards/keebio/quefrency/keymaps/jonavin/keymap.c b/keyboards/keebio/quefrency/keymaps/jonavin/keymap.c index 415f554e26..81b8497ca2 100644 --- a/keyboards/keebio/quefrency/keymaps/jonavin/keymap.c +++ b/keyboards/keebio/quefrency/keymaps/jonavin/keymap.c @@ -89,6 +89,7 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { enum custom_rgblight_layers { _rgbCAPS, + _rgbNUMLOCK, _rgbWINLOCK, _rgbFN, _rgbNUMPAD, @@ -98,7 +99,9 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { const rgblight_segment_t PROGMEM _rgb_capslock_layer[] = RGBLIGHT_LAYER_SEGMENTS( {14, 1, HSV_RED} // Light 4 LEDs, starting with LED 6 ); - const rgblight_segment_t PROGMEM _rgb_winlock_layer[] = RGBLIGHT_LAYER_SEGMENTS( + const rgblight_segment_t PROGMEM _rgb_numlock_layer[] = RGBLIGHT_LAYER_SEGMENTS( + {15, 1, HSV_BLUE} + ); const rgblight_segment_t PROGMEM _rgb_winlock_layer[] = RGBLIGHT_LAYER_SEGMENTS( {13, 1, HSV_PURPLE} // Light 4 LEDs, starting with LED 6 ); const rgblight_segment_t PROGMEM _rgb_fn_layer[] = RGBLIGHT_LAYER_SEGMENTS( @@ -113,6 +116,7 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { const rgblight_segment_t* const PROGMEM _rgb_layers[] = RGBLIGHT_LAYERS_LIST( _rgb_capslock_layer, + _rgb_numlock_layer, _rgb_winlock_layer, _rgb_fn_layer, _rgb_numpad_layer @@ -120,6 +124,13 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { bool led_update_user(led_t led_state) { rgblight_set_layer_state(_rgbCAPS, led_state.caps_lock); + + #ifdef INVERT_NUMLOCK_INDICATOR + rgblight_set_layer_state(_rgbNUMLOCK, !led_state.num_lock); // inverse numlock indicator override + #else + rgblight_set_layer_state(_rgbNUMLOCK, led_state.num_lock); // normal, light LED when numlock on + #endif // INVERT_NUMLOCK_INDICATOR + rgblight_set_layer_state(_rgbWINLOCK, keymap_config.no_gui); return true; } diff --git a/keyboards/keebio/quefrency/keymaps/jonavin/readme.md b/keyboards/keebio/quefrency/keymaps/jonavin/readme.md index 4833c5b626..dad817e8ec 100644 --- a/keyboards/keebio/quefrency/keymaps/jonavin/readme.md +++ b/keyboards/keebio/quefrency/keymaps/jonavin/readme.md @@ -17,6 +17,7 @@ - additional RGB function key binds to arrow on Fn layer - Add capslock indicator, win key lock indicator - Fn and layer 2 indicators using RGB underglow + - Inverted NUM lock indicator (light on when NUM lock is off when INVERT_NUMLOCK_INDICATOR = yes in rules.mk) rules.mk OPTIONS - Active features from userspace STARTUP_NUMLOCK_ON = yes diff --git a/keyboards/keebio/quefrency/keymaps/jonavin/rules.mk b/keyboards/keebio/quefrency/keymaps/jonavin/rules.mk index f27873bb80..ac2865f600 100644 --- a/keyboards/keebio/quefrency/keymaps/jonavin/rules.mk +++ b/keyboards/keebio/quefrency/keymaps/jonavin/rules.mk @@ -7,3 +7,4 @@ TAP_DANCE_ENABLE = yes TD_LSFT_CAPSLOCK_ENABLE = yes STARTUP_NUMLOCK_ON = yes +INVERT_NUMLOCK_INDICATOR = yes diff --git a/keyboards/mechwild/obe/keymaps/jonavin/keymap.c b/keyboards/mechwild/obe/keymaps/jonavin/keymap.c index b5b0829658..9e667fba15 100644 --- a/keyboards/mechwild/obe/keymaps/jonavin/keymap.c +++ b/keyboards/mechwild/obe/keymaps/jonavin/keymap.c @@ -19,7 +19,7 @@ #ifdef RGBLIGHT_ENABLE // Custom RGB Colours - #define RGB_OBE_BOW 0x00, 0xE4, 0xFF // colour for matching keycaps + #define HSV_OBE_BOW 180, 100, 100 // colour for matching keycaps #endif // RGBLIGHT_ENABLE const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { @@ -28,8 +28,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_MUTE, KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DEL, KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_PGDN, TT(_RAISE), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFTCAPSWIN,KC_Z, KC_X, KC_C, KC_V, KC_B, LT(_LOWER,KC_B), KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_UP, KC_RSFT, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(_FN1), LT(_RAISE,KC_SPC), KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + KC_LSFTCAPSWIN,KC_Z, KC_X, KC_C, KC_V, KC_B, LT(_LOWER,KC_B), KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_SFTUP,KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(_FN1), KC_RAISESPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ), [_FN1] = LAYOUT( KC_NO, KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_INS, @@ -39,18 +39,18 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS,KC_WINLCK,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NO, KC_NO, KC_HOME, KC_PGDN, KC_END ), [_LOWER] = LAYOUT( - KC_NO, KC_TILD, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RGB_VAD, RGB_VAI, KC_TRNS, KC_DEL, + EEP_RST, KC_TILD, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RGB_VAD, RGB_VAI, KC_TRNS, KC_DEL, RGB_HUI, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, EMO_TEARS, EMO_SAD, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, RGB_TOG, RGB_HUD, KC_NO, KC_NO, EMO_SHRUG,KC_NO, KC_NO, KC_NO, KC_NO, EMO_JOY, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, - KC_NO, KC_NO, KC_NO, EMO_CONFUSE,KC_NO,KC_NO,KC_TRNS,EMO_NERVOUS,KC_NO, KC_NO, KC_NO, KC_NO, RGB_MOD, KC_TRNS, - KC_TRNS, KC_APP, KC_TRNS, KC_BSPC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_SPD, RGB_RMOD, RGB_SPI + KC_NO, KC_NO, KC_NO, EMO_CONFUSE,KC_NO,KC_NO,KC_TRNS,EMO_NERVOUS, KC_NO, KC_NO, KC_NO, KC_NO, RGB_MOD, KC_TRNS, + KC_TRNS, KC_APP, KC_TRNS, KC_BSPC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_SPD, RGB_RMOD,RGB_SPI ), [_RAISE] = LAYOUT( - KC_NO, KC_TILD, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_P7, KC_P8, KC_P9, KC_P0, KC_PMNS, KC_PPLS, KC_PSLS, KC_DEL, - KC_NO, KC_NO, KC_HOME,KC_UP, KC_END, KC_PGUP, KC_NO, KC_TAB, KC_P4, KC_P5, KC_P6, KC_NO, KC_NO, KC_NO, KC_PEQL, - KC_NO, TT(_RAISE),KC_LEFT,KC_DOWN, KC_RGHT, KC_PGDN, KC_NO, KC_NO, KC_P1, KC_P2, KC_P3, KC_NO, KC_PAST, KC_PENT, + KC_NO, KC_GRV, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_P7, KC_P8, KC_P9, KC_P0, KC_PMNS, KC_PPLS, KC_PSLS, KC_DEL, + KC_VOLU, KC_NO, KC_HOME,KC_UP, KC_END, KC_PGUP, KC_NO, KC_TAB, KC_P4, KC_P5, KC_P6, KC_NO, KC_NO, KC_NO, KC_PEQL, + KC_VOLD,TT(_RAISE),KC_LEFT,KC_DOWN,KC_RGHT, KC_PGDN, KC_NO, KC_NO, KC_P1, KC_P2, KC_P3, KC_NO, KC_PAST, KC_PENT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, KC_P0, KC_00, KC_NO, KC_PDOT, KC_PSLS, CT_PGUP, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, CT_HOME, CT_PGDN, CT_END + KC_TRNS, KC_TRNS, KC_TRNS, KC_BSPC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, CT_HOME, CT_PGDN, CT_END ) }; @@ -58,8 +58,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { enum custom_rgblight_layers { - _rgbWINLOCK, - _rgbFN, + _rgbWINLOCK, _rgbFN, _rgbLOWER, _rgbRAISE }; @@ -91,7 +90,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { bool led_update_user(led_t led_state) { rgblight_set_layer_state(_rgbWINLOCK, keymap_config.no_gui); - return true; + writePin(LED_CAPS_LOCK_PIN, led_state.caps_lock); + #ifdef INVERT_NUMLOCK_INDICATOR + writePin(LED_NUM_LOCK_PIN, !led_state.num_lock); // inverse numlock indicator override + #else + writePin(LED_NUM_LOCK_PIN, led_state.num_lock); // normal, light LED when numlock on + #endif // INVERT_NUMLOCK_INDICATOR + return false; } layer_state_t layer_state_set_user(layer_state_t state) { @@ -106,8 +111,8 @@ void keyboard_post_init_keymap(void) { // keyboard_post_init_user() moved to userspace #ifdef RGBLIGHT_ENABLE rgblight_enable_noeeprom(); - rgblight_mode(RGBLIGHT_MODE_STATIC_LIGHT); - rgblight_setrgb(RGB_OBE_BOW); // Default startup colour + rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT); + rgblight_sethsv_noeeprom(HSV_OBE_BOW); // Default startup colour rgblight_layers = _rgb_layers; #endif } diff --git a/keyboards/mechwild/obe/keymaps/jonavin/readme.md b/keyboards/mechwild/obe/keymaps/jonavin/readme.md index d60958a4e9..f903a36f12 100644 --- a/keyboards/mechwild/obe/keymaps/jonavin/readme.md +++ b/keyboards/mechwild/obe/keymaps/jonavin/readme.md @@ -1,9 +1,10 @@ # Jonavin's MechWild Orange Boy Ergo keymap ---> This keymap makes user of user/jonavin userspace +--> This keymap makes use of user/jonavin userspace Features - Split spacebars, Split Backspace + - Inverted Num Lock indicator (LED on when num lock if off) - RGB Winlock indicator (requires LED stripto be installed) - RGB Layer indicators: FN/MO1 - Purple; LOWER/MO2 - Yellow; RAISE/MO3/NumPad - Green - quick demo https://youtu.be/gR1awbsouLk @@ -11,11 +12,12 @@ Features - Add PrtScr, Scroll Lock, Break, NumLock to Fn layer - Implement Win key lock using Fn+Win - Layer 2 (LOWER) when right B is held -- for emoticons -- Layer 2 RGB functions +- Layer 2 RGB functions, and EEPROM Reset - Layer 3 (RAISE) mod on Caps Lock with double-tap to switch to this layer, double tap to switch back - provides arrows on WASD and additional nav keys + right hand numpad with 00; an be used for Alt Code entry - left spacebar Backspace - add double tap of Left Shift to toggle Caps Lock +- Up arrow is also Shift when held rules.mk OPTIONS - Active features from userspace @@ -41,6 +43,8 @@ IDLE_TIMEOUT_ENABLE = yes EMOTICON_ENABLE - adds EMO_ keycodes for text emojis +INVERT_NUMLOCK_INDICATOR + - inverts the Num lock indicator, LED is on when num lokc is off + ## All layers diagram -![image](https://user-images.githubusercontent.com/71780717/135770721-ab263532-f645-4903-99cb-749549944e15.png) - +![image](https://user-images.githubusercontent.com/71780717/137356366-6b23c71b-9499-473e-a1e3-c65644135fc6.png) diff --git a/keyboards/mechwild/obe/keymaps/jonavin/rules.mk b/keyboards/mechwild/obe/keymaps/jonavin/rules.mk index e371b63498..008d0e1de9 100644 --- a/keyboards/mechwild/obe/keymaps/jonavin/rules.mk +++ b/keyboards/mechwild/obe/keymaps/jonavin/rules.mk @@ -9,3 +9,4 @@ TD_LSFT_CAPSLOCK_ENABLE = yes STARTUP_NUMLOCK_ON = yes ENCODER_DEFAULTACTIONS_ENABLE = yes EMOTICON_ENABLE = yes +INVERT_NUMLOCK_INDICATOR = yes diff --git a/users/jonavin/config.h b/users/jonavin/config.h index 440d222df0..7b6e335e3c 100644 --- a/users/jonavin/config.h +++ b/users/jonavin/config.h @@ -23,6 +23,7 @@ #define GRAVE_ESC_CTRL_OVERRIDE // Always send Escape if Control is pressed #define TAPPING_TERM 180 +#define TAPPING_TERM_PER_KEY #ifdef RGB_MATRIX_ENABLE #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR diff --git a/users/jonavin/jonavin.c b/users/jonavin/jonavin.c index 1a0760ea8f..367601dfba 100644 --- a/users/jonavin/jonavin.c +++ b/users/jonavin/jonavin.c @@ -341,6 +341,18 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { }; +uint16_t get_tapping_term(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case KC_SFTUP: + return 300; + case KC_RAISESPC: + case KC_LOWERSPC: + return 450; + default: + return TAPPING_TERM; + } +} + // Turn on/off NUM LOCK if current state is different void activate_numlock(bool turn_on) { if (IS_HOST_LED_ON(USB_LED_NUM_LOCK) != turn_on) { diff --git a/users/jonavin/jonavin.h b/users/jonavin/jonavin.h index feaf6b6a15..21b972ed75 100644 --- a/users/jonavin/jonavin.h +++ b/users/jonavin/jonavin.h @@ -55,6 +55,10 @@ enum custom_user_keycodes { #define CT_PGDN RCTL(KC_PGDN) #define CT_HOME RCTL(KC_HOME) #define CT_END RCTL(KC_END) +#define KC_SFTUP RSFT_T(KC_UP) // Shift when held, Up arrow when tapped +#define KC_RAISESPC LT(_RAISE,KC_SPC) // _RAISE layer mod when held, space when tapped +#define KC_LOWERSPC LT(_LOWER,KC_SPC) // _LOWER layer mod when held, space when tapped + #ifdef TD_LSFT_CAPSLOCK_ENABLE // Tap Dance Definitions diff --git a/users/jonavin/readme.md b/users/jonavin/readme.md index 9fccb8c73c..1b064ddc3c 100644 --- a/users/jonavin/readme.md +++ b/users/jonavin/readme.md @@ -32,6 +32,9 @@ KEYCODES: - CT_PGDN Ctrl-PgDn - CT_HOME Ctrl-HOme - CT_END Ctrl-End +- KC_SFTUP RShift when held, Up arrow when tapped +- KC_RAISESPC _RAISE layer mod when held, space when tapped +- KC_LOWERSPC _LOWER layer mod when held, space when tapped - When EMOTICON_ENABLE = yes - EMO_SHRUG `\_("/)_/` @@ -39,6 +42,7 @@ KEYCODES: - EMD_TEARS (T_T) - EMO_NERVOUS (~_~;) - EMO_JOY (^o^) +- EMO_SAD :'-( AVAILABLE ENCODER ACTIONS: @@ -79,7 +83,15 @@ IDLE_TIMEOUT_ENABLE = yes - Enables Timer functionality; for RGB idle timeouts that can be changed dynamically - When enabled, use this in the keymap for an additional matrix processing: void matrix_scan_keymap(void) -- Functions: +EMOTICON_ENABLE +- adds EMO_ keycodes for text emojis + +INVERT_NUMLOCK_INDICATOR +- inverts the Num lock indicator, LED is on when num lock is off + + +FUNCTIONS +------------------------ - u16int_t get_timeout_threshold(void) // returns the current timeout threshold - void timeout_update_threshold(bool increase) // change threshold: true = increase, false = decrease - void timeout_reset_timer(void) // resets timer (put in process_record_user if you override it) diff --git a/users/jonavin/rules.mk b/users/jonavin/rules.mk index eb279f6290..6460021247 100644 --- a/users/jonavin/rules.mk +++ b/users/jonavin/rules.mk @@ -17,3 +17,6 @@ endif ifeq ($(strip $(EMOTICON_ENABLE)), yes) OPT_DEFS += -DEMOTICON_ENABLE endif +ifeq ($(strip $(INVERT_NUMLOCK_INDICATOR)), yes) + OPT_DEFS += -DINVERT_NUMLOCK_INDICATOR +endif From bfddc7dfa15555edf0cf36d649ba84413e642c9c Mon Sep 17 00:00:00 2001 From: Ingomancer Date: Sat, 23 Oct 2021 08:15:39 +0200 Subject: [PATCH 328/595] Reformat iris keymap antonlindstrom to be a bit more readable and consistent (#14902) Co-authored-by: Ingo Junefjord --- .../iris/keymaps/antonlindstrom/keymap.c | 22 +++++++++---------- 1 file changed, 11 insertions(+), 11 deletions(-) diff --git a/keyboards/keebio/iris/keymaps/antonlindstrom/keymap.c b/keyboards/keebio/iris/keymaps/antonlindstrom/keymap.c index ff98545ba3..3e06ffff29 100644 --- a/keyboards/keebio/iris/keymaps/antonlindstrom/keymap.c +++ b/keyboards/keebio/iris/keymaps/antonlindstrom/keymap.c @@ -19,17 +19,17 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_QWERTY] = LAYOUT( - //,----+----+----+----+----+----. ,----+----+----+----+----+----. - KC_ESC , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 ,KC_BSPC, - //|----+----+----+----+----+----| |----+----+----+----+----+----| - KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , SE_ARNG , - //|----+----+----+----+----+----| |----+----+----+----+----+----| - KC_LSFT, KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L , SE_ODIA , SE_ADIA , - //|----+----+----+----+----+----+----. ,----|----+----+----+----+----+----| - KC_LCTL, KC_Z , KC_X , KC_C , KC_V , KC_B ,KC_LBR ,KC_RBR , KC_N , KC_M ,KC_COMM,KC_DOT ,KC_SLSH,KC_MINS, - //`----+----+----+--+-+----+----+----/ \----+----+----+----+----+----+----' - KC_LGUI,KC_LOWR,KC_SPC , KC_ENT ,KC_RASE,KC_LALT - // `----+----+----' `----+----+----' + //,-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------. + KC_ESC , KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 ,KC_BSPC, + //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------| + KC_TAB , KC_Q , KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P ,SE_ARNG, + //|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------| + KC_LSFT, KC_A , KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L ,SE_ODIA,SE_ADIA, + //|-------+-------+-------+-------+-------+-------+-------. ,-------|-------+-------+-------+-------+-------+-------| + KC_LCTL, KC_Z , KC_X , KC_C , KC_V , KC_B ,KC_LBR , KC_RBR , KC_N , KC_M ,KC_COMM,KC_DOT ,KC_SLSH,KC_MINS, + //`-------+-------+-------+--+----+-------+-------+-------/ \-------+-------+-------+-------+-------+-------+-------' + KC_LGUI,KC_LOWR,KC_SPC , KC_ENT ,KC_RASE,KC_LALT + // `-------+-------+-------' `-------+-------+-------' ), [_LOWER] = LAYOUT( From a167a95bd07adfa15c3837fdee9cee507e49ae06 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Reibl=20J=C3=A1nos=20D=C3=A1niel?= Date: Sat, 23 Oct 2021 08:30:43 +0200 Subject: [PATCH 329/595] [Keymap] Simplify unicode input mode change and CTRL and GUI swapping (#14874) --- layouts/community/ortho_5x12/riblee/keymap.c | 12 ++++++------ users/riblee/riblee.c | 6 ++++++ 2 files changed, 12 insertions(+), 6 deletions(-) diff --git a/layouts/community/ortho_5x12/riblee/keymap.c b/layouts/community/ortho_5x12/riblee/keymap.c index b34217bff4..b722483759 100644 --- a/layouts/community/ortho_5x12/riblee/keymap.c +++ b/layouts/community/ortho_5x12/riblee/keymap.c @@ -189,17 +189,17 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |------+------+------+------+------+-------------+------+------+------+------+------| * | | |Mu mod|Aud on|AudOff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| HUN |Wrkmn | * |------+------+------+------+------+------|------+------+------+------+------+------| - * | | | | | | | NKRO | Swap |Un swp|UC Mod| | | + * | | | | | | | NKRO | Mac |Linux | | | | * |------+------+------+------+------+------+------+------+------+------+------+------| * | | | | | | | | | | | | * `-----------------------------------------------------------------------------------' */ [_ADJUST] = LAYOUT_ortho_5x12( - KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, - _______, RESET, DEBUG, _______, _______, _______, _______, TERM_ON, TERM_OFF,KC_INS, KC_PSCR, KC_DEL, - _______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, HUNGARIAN, WORKMAN, - _______, _______, _______, _______, _______, _______, NK_TOGG, LCG_SWP, LCG_NRM, UC_MOD, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + _______, RESET, DEBUG, _______, _______, _______, _______, TERM_ON, TERM_OFF, KC_INS, KC_PSCR, KC_DEL, + _______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, HUNGARIAN, WORKMAN, + _______, _______, _______, _______, _______, _______, NK_TOGG, CG_NORM, CG_SWAP, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) }; \ No newline at end of file diff --git a/users/riblee/riblee.c b/users/riblee/riblee.c index ae3bd7a2b1..6f608f94f5 100644 --- a/users/riblee/riblee.c +++ b/users/riblee/riblee.c @@ -175,6 +175,12 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } return false; break; + case CG_NORM: + set_unicode_input_mode(UC_MAC); + break; + case CG_SWAP: + set_unicode_input_mode(UC_LNX); + break; } return true; }; From 974e9e0a6b60423aaeb55a32d62f4835aee01a33 Mon Sep 17 00:00:00 2001 From: George Petri Date: Sat, 23 Oct 2021 09:34:05 +0300 Subject: [PATCH 330/595] [Keymap] Add Gergoplex keymap (#14768) --- .../gergoplex/keymaps/georgepetri/combos.def | 11 ++ .../gergoplex/keymaps/georgepetri/config.h | 26 +++++ .../keymaps/georgepetri/gergoplex.def | 6 + .../gergoplex/keymaps/georgepetri/keymap.c | 110 ++++++++++++++++++ .../gergoplex/keymaps/georgepetri/readme.md | 6 + .../gergoplex/keymaps/georgepetri/rules.mk | 17 +++ 6 files changed, 176 insertions(+) create mode 100644 keyboards/gboards/gergoplex/keymaps/georgepetri/combos.def create mode 100644 keyboards/gboards/gergoplex/keymaps/georgepetri/config.h create mode 100644 keyboards/gboards/gergoplex/keymaps/georgepetri/gergoplex.def create mode 100644 keyboards/gboards/gergoplex/keymaps/georgepetri/keymap.c create mode 100644 keyboards/gboards/gergoplex/keymaps/georgepetri/readme.md create mode 100644 keyboards/gboards/gergoplex/keymaps/georgepetri/rules.mk diff --git a/keyboards/gboards/gergoplex/keymaps/georgepetri/combos.def b/keyboards/gboards/gergoplex/keymaps/georgepetri/combos.def new file mode 100644 index 0000000000..a9205c028a --- /dev/null +++ b/keyboards/gboards/gergoplex/keymaps/georgepetri/combos.def @@ -0,0 +1,11 @@ +// List any combo dictionaries you want loaded to your device below! + +// QMK wide includes +//#include "combos/germ-vim-helpers.def" +#include "combos/germ-mouse-keys.def" + +// User includes +#include "gergoplex.def" + +// Word completion +// #include "combos/eng-combos.def" diff --git a/keyboards/gboards/gergoplex/keymaps/georgepetri/config.h b/keyboards/gboards/gergoplex/keymaps/georgepetri/config.h new file mode 100644 index 0000000000..a60188ef90 --- /dev/null +++ b/keyboards/gboards/gergoplex/keymaps/georgepetri/config.h @@ -0,0 +1,26 @@ +/* +Copyright 2012 Jun Wako +Copyright 2013 Oleg Kostyuk + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +// Copy and worked on with love from the EZ team + +#pragma once + +#define HOLD_ON_OTHER_KEY_PRESS_PER_KEY + +#undef DEBOUNCE +#define DEBOUNCE 25 diff --git a/keyboards/gboards/gergoplex/keymaps/georgepetri/gergoplex.def b/keyboards/gboards/gergoplex/keymaps/georgepetri/gergoplex.def new file mode 100644 index 0000000000..239d351b70 --- /dev/null +++ b/keyboards/gboards/gergoplex/keymaps/georgepetri/gergoplex.def @@ -0,0 +1,6 @@ +// Gergoplex specfic combos + +COMB(hjEnt, KC_ENT, KC_H, KC_J) +COMB(loDel, KC_DEL, KC_L, KC_O) +COMB(pscBspace, KC_BSPC, KC_P, KC_SCLN) +COMB(fgEsc, KC_ESC, KC_F, KC_G) diff --git a/keyboards/gboards/gergoplex/keymaps/georgepetri/keymap.c b/keyboards/gboards/gergoplex/keymaps/georgepetri/keymap.c new file mode 100644 index 0000000000..de3bcf67ad --- /dev/null +++ b/keyboards/gboards/gergoplex/keymaps/georgepetri/keymap.c @@ -0,0 +1,110 @@ +/* Copyright 2021 Jane Bernhardt + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +/* Good on you for modifying your layout! if you don't have + * time to read the QMK docs, a list of keycodes can be found at + * https://github.com/qmk/qmk_firmware/blob/master/docs/keycodes.md + */ + +#include QMK_KEYBOARD_H +#include "g/keymap_combo.h" + +enum { + _ALPHA, // default + _SPECIAL, // special characters + _NUMBERS // numbers/function/motion +}; + +#define KC_CTL_A MT(MOD_LCTL, KC_A) // Tap for A, hold for Control +#define KC_SFT_Z MT(MOD_RSFT, KC_Z) // Tap for Z, hold for Shift +#define KC_SFT_SL MT(MOD_RSFT, KC_SLSH) // Tap for slash, hold for Shift + +#define KC_ALT_ENT MT(MOD_LALT, KC_ENT) // Tap for Enter, hold for Alt (Option) +#define KC_SPE_SPC LT(_SPECIAL, KC_SPC) // Tap for Space, hold for Special layer +#define KC_NUM_SPC LT(_NUMBERS, KC_SPC) // Tap for Space, hold for Numbers layer + + /* Combomap + * + * ,-------------------------------. ,-------------------------------. + * | | | | | | | | | | | | + * |-------+-----+-----+-----+-----| |-----+-----+-----+-DEL-+-BSPC--| + * | | | | ESC | | ENT | | | | + * |-------+-----+-----+-RMB-+-LMB-| |-----+-----+-----+-----+-------| + * | | | | | | | | | | | | + * `-------------------------------' `-------------------------------' + * .-----------------. .-----------------. + * | | | | | | | | + * '-----------------' '-----------------' + */ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Keymap 0: Alpha layer + * + * ,-------------------------------. ,-------------------------------. + * | Q | W | E | R | T | | Y | U | I | O | P | + * |-------+-----+-----+-----+-----| |-----+-----+-----+-----+-------| + * | CTRL A| S | D | F | G | | H | J | K | L | ; | + * |-------+-----+-----+-----+-----| |-----+-----+-----+-----+-------| + * | SHFT Z| X | C | V | B | | N | M | , | . |SHFT / | + * `-------------------------------' `-------------------------------' + * .--------------------------. .----------------------. + * | META | ENT ALT | SPC SPE | | SPC NUM | TAB | SHFT | + * '--------------------------' '----------------------' + */ + [_ALPHA] = LAYOUT_split_3x5_3( + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, + KC_CTL_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, + KC_SFT_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMMA, KC_DOT, KC_SFT_SL, + KC_LGUI, KC_ALT_ENT, KC_SPE_SPC, KC_NUM_SPC, KC_TAB, KC_RSFT), + + /* Keymap 1: Special characters layer + * + * ,-------------------------------. ,-------------------------------. + * | ! | @ | { | } | | | | ` | - | = | / | \ | + * |-------+-----+-----+-----+-----| |-----+-----+-----+-----+-------| + * | # | $ | ( | ) | | | LFT | DWN | UP | RGT | ' | + * |-------+-----+-----+-----+-----| |-----+-----+-----+-----+-------| + * | % | ^ | [ | ] | | | & | ~ | + | * | | + * `-------------------------------' `-------------------------------' + * .-------------------. .-----------------. + * | | | | | | | | + * '-------------------' '-----------------' + */ + [_SPECIAL] = LAYOUT_split_3x5_3( + KC_EXLM, KC_AT, KC_LCBR, KC_RCBR, KC_PIPE, KC_GRV, KC_MINS, KC_EQL , KC_SLSH, KC_BSLS, + KC_HASH, KC_DLR, KC_LPRN, KC_RPRN, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP , KC_RGHT, KC_QUOT, + KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_TRNS, KC_AMPR, KC_TILD, KC_PLUS, KC_ASTR, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + /* Keymap 2: Numbers/Function/Motion layer + * + * ,-------------------------------. ,-------------------------------. + * | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | + * |-------+-----+-----+-----+-----| |-----+-----+-----+-----+-------| + * | F1 | F2 | F3 | F4 | F5 | | | | | | | + * |-------+-----+-----+-----+-----| |-----+-----+-----+-----+-------| + * | F6 | F7 | F8 | F9 | F10 | | MLFT| MDWN| MUP | MRGT| | + * `-------------------------------' `-------------------------------' + * .-----------------. .-----------------. + * | F11 | F12 | | | | | | + * '-----------------' '-----------------' + */ + [_NUMBERS] = LAYOUT_split_3x5_3( + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, KC_TRNS, + KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) +}; diff --git a/keyboards/gboards/gergoplex/keymaps/georgepetri/readme.md b/keyboards/gboards/gergoplex/keymaps/georgepetri/readme.md new file mode 100644 index 0000000000..7c8a6f2023 --- /dev/null +++ b/keyboards/gboards/gergoplex/keymaps/georgepetri/readme.md @@ -0,0 +1,6 @@ +# George Petri's Gergoplex layout +Vim and programming focused layout. +``` +qmk compile -kb gboards/gergoplex -km georgepetri +qmk flash -kb gboards/gergoplex -km georgepetri +``` diff --git a/keyboards/gboards/gergoplex/keymaps/georgepetri/rules.mk b/keyboards/gboards/gergoplex/keymaps/georgepetri/rules.mk new file mode 100644 index 0000000000..e882b8008d --- /dev/null +++ b/keyboards/gboards/gergoplex/keymaps/georgepetri/rules.mk @@ -0,0 +1,17 @@ +#---------------------------------------------------------------------------- +# make gboards/gergoplex:default:flash +# Make sure you have dfu-programmer installed! +#---------------------------------------------------------------------------- + +#Debug options +VERBOSE = no +DEBUG_MATRIX_SCAN_RATE = no +DEBUG_MATRIX = no +CONSOLE_ENABLE = no + +#Combos! +VPATH += keyboards/gboards/ + +ifeq ($(strip $(DEBUG_MATRIX)), yes) + OPT_DEFS += -DDEBUG_MATRIX +endif From ff3989062089fca2778b15432403cf68520ca324 Mon Sep 17 00:00:00 2001 From: ForsakenRei <23041178+ForsakenRei@users.noreply.github.com> Date: Sat, 23 Oct 2021 02:45:07 -0400 Subject: [PATCH 331/595] [Docs] Add default case to tap dance example 5. (#14893) --- docs/feature_tap_dance.md | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/docs/feature_tap_dance.md b/docs/feature_tap_dance.md index 5f413d3a39..d1988b9b7d 100644 --- a/docs/feature_tap_dance.md +++ b/docs/feature_tap_dance.md @@ -393,6 +393,9 @@ void altlp_finished(qk_tap_dance_state_t *state, void *user_data) { case TD_DOUBLE_SINGLE_TAP: // Allow nesting of 2 parens `((` within tapping term tap_code16(KC_LPRN); register_code16(KC_LPRN); + break; + default: + break; } } @@ -406,6 +409,9 @@ void altlp_reset(qk_tap_dance_state_t *state, void *user_data) { break; case TD_DOUBLE_SINGLE_TAP: unregister_code16(KC_LPRN); + break; + default: + break; } } From ec8c1e05af7871b160e1f6c330dc5f7f73d74c43 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Reibl=20J=C3=A1nos=20D=C3=A1niel?= Date: Sun, 24 Oct 2021 00:20:18 +0200 Subject: [PATCH 332/595] [Keymap] Add logo to riblee userspace (#14875) --- users/riblee/riblee.c | 36 +++++++++++++++++++++++++++++++++++- 1 file changed, 35 insertions(+), 1 deletion(-) diff --git a/users/riblee/riblee.c b/users/riblee/riblee.c index 6f608f94f5..04e37b2428 100644 --- a/users/riblee/riblee.c +++ b/users/riblee/riblee.c @@ -189,8 +189,29 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { static char receive_buffer[128] = {}; static uint8_t receive_buffer_length = 0; +uint16_t startup_timer; -void oled_task_user(void) { +oled_rotation_t oled_init_user(oled_rotation_t rotation) { + startup_timer = timer_read(); + return rotation; +} + +static void render_logo(void) { + static const char PROGMEM raw_logo[] = { + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 96, 96, 96,240,248,255, 63, 56,255,255,248, 63, 63,248,255,255, 56, 63,255,248,240, 96, 96, 96, 0, 0, 0, 0, 0,252,254, 38, 54, 60, 8,240,152,152,248,240, 24,248,224,248,120,224,240,120, 96,248,248,248,248, 32,248,248, 24, 24,240,248,248,248,240,240,248,152,152,254,254, 0, 0, 0,254,254,152,248,240, 24,248,224,240,120, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0,219,219,219,255,255,255,240,192,143,159, 63, 0, 0, 63,159,143,192,240,255,255,255,219,219,219, 0, 0, 0, 0, 0,192,225,112, 48, 48, 48,112,225,129, 1,240,240,240,193, 1, 0, 1,193,240,240,241, 1, 1,241,240,193,225,112, 48, 0, 1, 1, 1, 1,240,241, 49, 49, 49, 0,240,240, 0,129,193,129,193,192, 0,196,135,193,192,128,128,192,192,128, 0, 0,192,128, 0,128,192,128, 0, 0,192,192,128,128,192,192,192,128, 0,128,192,128,192,192, 0,128,192,192,192,128, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 6, 6, 6, 15, 31,255,255, 31,255,255, 31,252,252, 31,255,255, 31,255,255, 31, 15, 6, 6, 6, 0, 0, 0, 0, 0, 15, 31, 56, 48, 48, 48, 60,127,103, 96, 63, 63, 0, 7, 63, 56, 31, 7, 0, 63, 63, 0, 0, 63, 63, 7, 30, 60, 48, 0, 0, 0, 0, 0, 63, 31, 3, 3, 3, 0, 63, 63, 0, 31, 63, 1, 0, 0, 0, 63, 31, 0, 1, 63, 63, 0, 0, 63, 63, 0, 7, 63, 60, 63, 7, 31, 60, 63, 15, 0, 28, 60, 54, 54, 63, 63, 0, 63, 63, 1, 0, 0, 31, 63, 54, 54, 55, 55, 2, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,128,128,128,128,128,128,128, 0, 0,192,192,192, 0,192,192,192, 0, 0, 0, 0, 0, 0,192,192,192, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,255,255,255, 29,127,255,247,224, 0,254,254,254, 0,255,255,255,198,254,254,254, 0, 0,255,255,255,124,254,254,214,214,222,222, 92,124,254,254,214,214,222,222, 92, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + }; + + oled_write_raw_P(raw_logo, sizeof(raw_logo)); +} + +static void render_info(void) { // Keyboard Layer Status oled_write_P(PSTR("Layer: "), false); @@ -227,6 +248,19 @@ void oled_task_user(void) { oled_write_ln(receive_buffer, false); } +void oled_task_user(void) { + static bool finished_timer = false; + if (!finished_timer && (timer_elapsed(startup_timer) < 1000)) { + render_logo(); + } else { + if (!finished_timer) { + oled_clear(); + finished_timer = true; + } + render_info(); + } +} + #ifdef RAW_ENABLE void raw_hid_receive(uint8_t *data, uint8_t length) { From 19b9e406dc516da79d96ad72fe4bc20e3ea4a773 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Sun, 24 Oct 2021 14:18:57 +0100 Subject: [PATCH 333/595] Align usbasp flashing behaviour (#14928) --- platforms/avr/flash.mk | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/platforms/avr/flash.mk b/platforms/avr/flash.mk index 985cb60e52..6d50e72534 100644 --- a/platforms/avr/flash.mk +++ b/platforms/avr/flash.mk @@ -130,6 +130,15 @@ avrdude-split-right: $(BUILD_DIR)/$(TARGET).hex check-size cpfirmware $(call EXEC_AVRDUDE,eeprom-righthand.eep) define EXEC_USBASP + if $(AVRDUDE_PROGRAMMER) -p $(AVRDUDE_MCU) -c usbasp 2>&1 | grep -q "could not find USB device with"; then \ + printf "$(MSG_BOOTLOADER_NOT_FOUND_QUICK_RETRY)" ;\ + sleep $(BOOTLOADER_RETRY_TIME) ;\ + until $(AVRDUDE_PROGRAMMER) -p $(AVRDUDE_MCU) -c usbasp 2>&1 | (! grep -q "could not find USB device with"); do\ + printf "." ;\ + sleep $(BOOTLOADER_RETRY_TIME) ;\ + done ;\ + printf "\n" ;\ + fi $(AVRDUDE_PROGRAMMER) -p $(AVRDUDE_MCU) -c usbasp -U flash:w:$(BUILD_DIR)/$(TARGET).hex endef From 6ee29d9aa679ff1d1fe21e712c6015982247990e Mon Sep 17 00:00:00 2001 From: Ryan Date: Mon, 25 Oct 2021 04:46:20 +1100 Subject: [PATCH 334/595] Tidy up ADNS9800 and PMW3360 firmware blobs (#14936) --- drivers/sensors/adns9800.c | 7 +- drivers/sensors/adns9800_srom_A6.h | 3268 ++-------------------------- drivers/sensors/pmw3360.c | 2 +- drivers/sensors/pmw3360_firmware.h | 539 +++-- 4 files changed, 461 insertions(+), 3355 deletions(-) diff --git a/drivers/sensors/adns9800.c b/drivers/sensors/adns9800.c index 36213179f7..17966b81f9 100644 --- a/drivers/sensors/adns9800.c +++ b/drivers/sensors/adns9800.c @@ -78,8 +78,7 @@ #define US_BEFORE_MOTION 100 #define MSB1 0x80 -extern const uint16_t adns_firmware_length; -extern const uint8_t adns_firmware_data[]; +extern const uint8_t firmware_data[]; void adns_spi_start(void){ spi_start(SPI_SS_PIN, false, SPI_MODE, SPI_DIVISOR); @@ -145,8 +144,8 @@ void adns_init() { // send all bytes of the firmware unsigned char c; - for(int i = 0; i < adns_firmware_length; i++){ - c = (unsigned char)pgm_read_byte(adns_firmware_data + i); + for(int i = 0; i < FIRMWARE_LENGTH; i++){ + c = (unsigned char)pgm_read_byte(firmware_data + i); spi_write(c); wait_us(15); } diff --git a/drivers/sensors/adns9800_srom_A6.h b/drivers/sensors/adns9800_srom_A6.h index f5b3abeb62..e698a401b9 100644 --- a/drivers/sensors/adns9800_srom_A6.h +++ b/drivers/sensors/adns9800_srom_A6.h @@ -2,3077 +2,201 @@ #include "progmem.h" -const uint16_t adns_firmware_length = 3070; +#define FIRMWARE_LENGTH 3070 -const uint8_t adns_firmware_data[] PROGMEM = { -0x03, -0xa6, -0x68, -0x1e, -0x7d, -0x10, -0x7e, -0x7e, -0x5f, -0x1c, -0xb8, -0xf2, -0x47, -0x0c, -0x7b, -0x74, -0x4b, -0x14, -0x8b, -0x75, -0x66, -0x51, -0x0b, -0x8c, -0x76, -0x74, -0x4b, -0x14, -0xaa, -0xd6, -0x0f, -0x9c, -0xba, -0xf6, -0x6e, -0x3f, -0xdd, -0x38, -0xd5, -0x02, -0x80, -0x9b, -0x82, -0x6d, -0x58, -0x13, -0xa4, -0xab, -0xb5, -0xc9, -0x10, -0xa2, -0xc6, -0x0a, -0x7f, -0x5d, -0x19, -0x91, -0xa0, -0xa3, -0xce, -0xeb, -0x3e, -0xc9, -0xf1, -0x60, -0x42, -0xe7, -0x4c, -0xfb, -0x74, -0x6a, -0x56, -0x2e, -0xbf, -0xdd, -0x38, -0xd3, -0x05, -0x88, -0x92, -0xa6, -0xce, -0xff, -0x5d, -0x38, -0xd1, -0xcf, -0xef, -0x58, -0xcb, -0x65, -0x48, -0xf0, -0x35, -0x85, -0xa9, -0xb2, -0x8f, -0x5e, -0xf3, -0x80, -0x94, -0x97, -0x7e, -0x75, -0x97, -0x87, -0x73, -0x13, -0xb0, -0x8a, -0x69, -0xd4, -0x0a, -0xde, -0xc1, -0x79, -0x59, -0x36, -0xdb, -0x9d, -0xd6, -0xb8, -0x15, -0x6f, -0xce, -0x3c, -0x72, -0x32, -0x45, -0x88, -0xdf, -0x6c, -0xa5, -0x6d, -0xe8, -0x76, -0x96, -0x14, -0x74, -0x20, -0xdc, -0xf4, -0xfa, -0x37, -0x6a, -0x27, -0x32, -0xe3, -0x29, -0xbf, -0xc4, -0xc7, -0x06, -0x9d, -0x58, -0xe7, -0x87, -0x7c, -0x2e, -0x9f, -0x6e, -0x49, -0x07, -0x5d, -0x23, -0x64, -0x54, -0x83, -0x6e, -0xcb, -0xb7, -0x77, -0xf7, -0x2b, -0x6e, -0x0f, -0x2e, -0x66, -0x12, -0x60, -0x55, -0x65, -0xfc, -0x43, -0xb3, -0x58, -0x73, -0x5b, -0xe8, -0x67, -0x04, -0x43, -0x02, -0xde, -0xb3, -0x89, -0xa0, -0x6d, -0x3a, -0x27, -0x79, -0x64, -0x5b, -0x0c, -0x16, -0x9e, -0x66, -0xb1, -0x8b, -0x87, -0x0c, -0x5d, -0xf2, -0xb6, -0x3d, -0x71, -0xdf, -0x42, -0x03, -0x8a, -0x06, -0x8d, -0xef, -0x1d, -0xa8, -0x96, -0x5c, -0xed, -0x31, -0x61, -0x5c, -0xa1, -0x34, -0xf6, -0x8c, -0x08, -0x60, -0x33, -0x07, -0x00, -0x3e, -0x79, -0x95, -0x1b, -0x43, -0x7f, -0xfe, -0xb6, -0xa6, -0xd4, -0x9d, -0x76, -0x72, -0xbf, -0xad, -0xc0, -0x15, -0xe8, -0x37, -0x31, -0xa3, -0x72, -0x63, -0x52, -0x1d, -0x1c, -0x5d, -0x51, -0x1b, -0xe1, -0xa9, -0xed, -0x60, -0x32, -0x3e, -0xa9, -0x50, -0x28, -0x53, -0x06, -0x59, -0xe2, -0xfc, -0xe7, -0x02, -0x64, -0x39, -0x21, -0x56, -0x4a, -0xa5, -0x40, -0x80, -0x81, -0xd5, -0x5a, -0x60, -0x7b, -0x68, -0x84, -0xf1, -0xe0, -0xb1, -0xb6, -0x5b, -0xdf, -0xa8, -0x1d, -0x6d, -0x65, -0x20, -0xc0, -0xa2, -0xb9, -0xd9, -0xbb, -0x00, -0xa6, -0xdb, -0x8b, -0x01, -0x53, -0x91, -0xfe, -0xc4, -0x51, -0x85, -0xb0, -0x96, -0x7f, -0xfd, -0x51, -0xdd, -0x14, -0x03, -0x67, -0x2e, -0x75, -0x1c, -0x76, -0xd3, -0x6e, -0xdd, -0x99, -0x55, -0x76, -0xe5, -0xab, -0x23, -0xfc, -0x4a, -0xd5, -0xc6, -0xe8, -0x2e, -0xca, -0x8a, -0xb3, -0xf6, -0x8c, -0x6c, -0xb0, -0xe9, -0xf2, -0xe7, -0x9e, -0x69, -0x41, -0xed, -0xf1, -0x6d, -0xd2, -0x86, -0xd8, -0x7e, -0xcb, -0x5d, -0x47, -0x6c, -0x85, -0x6a, -0x23, -0xed, -0x20, -0x40, -0x93, -0xb4, -0x20, -0xc7, -0xa5, -0xc9, -0xaf, -0x03, -0x15, -0xac, -0x19, -0xe5, -0x2a, -0x36, -0xdf, -0x6d, -0xc5, -0x8c, -0x80, -0x07, -0xce, -0x92, -0x0c, -0xd8, -0x06, -0x62, -0x0f, -0xdd, -0x48, -0x46, -0x1a, -0x53, -0xc7, -0x8a, -0x8c, -0x5d, -0x5d, -0xb4, -0xa1, -0x02, -0xd3, -0xa9, -0xb8, -0xf3, -0x94, -0x8f, -0x3f, -0xe5, -0x54, -0xd4, -0x11, -0x65, -0xb2, -0x5e, -0x09, -0x0b, -0x81, -0xe3, -0x75, -0xa7, -0x89, -0x81, -0x39, -0x6c, -0x46, -0xf6, -0x06, -0x9f, -0x27, -0x3b, -0xb6, -0x2d, -0x5f, -0x1d, -0x4b, -0xd4, -0x7b, -0x1d, -0x61, -0x74, -0x89, -0xe4, -0xe3, -0xbd, -0x98, -0x1b, -0xc4, -0x51, -0x3b, -0xa4, -0xfa, -0xe0, -0x92, -0xf7, -0xbe, -0xf2, -0x4d, -0xbb, -0xff, -0xad, -0x4f, -0x6d, -0x68, -0xc2, -0x79, -0x40, -0xaa, -0x9b, -0x8f, -0x0c, -0x32, -0x4b, -0x5f, -0x3e, -0xab, -0x59, -0x98, -0xb3, -0xf5, -0x1d, -0xac, -0x5e, -0xbc, -0x78, -0xd3, -0x01, -0x6c, -0x64, -0x15, -0x2f, -0xd8, -0x71, -0xa6, -0x2d, -0x45, -0xe1, -0x22, -0x42, -0xe4, -0x4e, -0x04, -0x3c, -0x7d, -0xf4, -0x40, -0x21, -0xb4, -0x67, -0x05, -0xa8, -0xe2, -0xf3, -0x72, -0x87, -0x4c, -0x7d, -0xd9, -0x1b, -0x65, -0x97, -0xf3, -0xc2, -0xe3, -0xe4, -0xc8, -0xd2, -0xde, -0xf6, -0xef, -0xdc, -0xbb, -0x44, -0x08, -0x5e, -0xe2, -0x45, -0x27, -0x01, -0xb0, -0xf6, -0x43, -0xe7, -0x3a, -0xf6, -0xdc, -0x9d, -0xed, -0xf3, -0xc5, -0x0c, -0xb8, -0x9c, -0x98, -0x3a, -0xd8, -0x36, -0xee, -0x96, -0x72, -0x67, -0xe7, -0x81, -0x91, -0xd5, -0x05, -0x0a, -0xe0, -0x82, -0xd5, -0x8f, -0xe8, -0xf9, -0xb0, -0xc9, -0xcf, -0x93, -0xe7, -0x04, -0xc5, -0xbc, -0x2b, -0x43, -0x56, -0x7e, -0xe8, -0x67, -0x7c, -0xe5, -0xfb, -0x49, -0xad, -0x5e, -0x9f, -0x25, -0x13, -0xde, -0x6e, -0x6e, -0xe9, -0xf1, -0xec, -0x87, -0x0b, -0x59, -0x81, -0x76, -0x84, -0x76, -0xb3, -0x24, -0xaf, -0x30, -0xfd, -0x27, -0x8b, -0xab, -0xd8, -0x00, -0x8b, -0x9b, -0x0c, -0xd2, -0xb2, -0x4e, -0x5e, -0x9d, -0x1d, -0x96, -0x01, -0x00, -0x67, -0xc1, -0x5f, -0x02, -0x20, -0xfd, -0x45, -0x6a, -0x01, -0x60, -0x58, -0x45, -0xca, -0x47, -0x21, -0x90, -0x5a, -0xc4, -0x43, -0x26, -0x1a, -0xd7, -0xa5, -0x4a, -0xb2, -0x5d, -0x2b, -0x35, -0x49, -0xfb, -0xa5, -0x17, -0x92, -0x21, -0x1e, -0x93, -0x96, -0x67, -0xa2, -0x7e, -0x36, -0x7a, -0xde, -0x5f, -0xbe, -0x7a, -0x58, -0x9d, -0xf8, -0x78, -0xa3, -0xfa, -0xc8, -0xd5, -0x17, -0xf0, -0x21, -0x97, -0x8c, -0x80, -0xb5, -0x4b, -0x3b, -0xbd, -0xbb, -0x41, -0x21, -0xa8, -0x50, -0x67, -0xf7, -0xe7, -0x19, -0x80, -0x10, -0x8e, -0xce, -0x04, -0x18, -0x3f, -0x51, -0x6b, -0x77, -0xd8, -0x9e, -0x16, -0xaf, -0xec, -0xef, -0x48, -0x16, -0x4d, -0x9e, -0x85, -0x38, -0x18, -0x3e, -0xd4, -0x28, -0x87, -0x60, -0x2a, -0xf6, -0x7f, -0x09, -0x86, -0x6f, -0x9c, -0x3c, -0x3a, -0xff, -0xab, -0xd0, -0x61, -0xa2, -0x97, -0x0d, -0x71, -0x94, -0x7e, -0xfd, -0xb9, -0x80, -0x02, -0x89, -0x6a, -0xb3, -0x84, -0x6c, -0x2a, -0x77, -0x62, -0xbe, -0x0b, -0xf4, -0xaf, -0xac, -0x7b, -0x7c, -0x8e, -0xca, -0x01, -0xba, -0x71, -0x78, -0x94, -0xfd, -0xb5, -0x39, -0xa4, -0x4d, -0x2f, -0x78, -0xcf, -0xca, -0x92, -0x0c, -0x1a, -0x99, -0x48, -0x4c, -0x11, -0x96, -0xb5, -0x4e, -0x41, -0x28, -0xe4, -0xa6, -0xfe, -0x4b, -0x72, -0x91, -0xe7, -0xd4, -0xdd, -0x9f, -0x12, -0xe6, -0x29, -0x38, -0xce, -0x45, -0xae, -0x02, -0xb8, -0x24, -0xae, -0xbd, -0xe9, -0x66, -0x08, -0x62, -0xa2, -0x2c, -0x2b, -0x00, -0xe2, -0x23, -0xd9, -0xc4, -0x48, -0xe4, -0xd3, -0xac, -0xbb, -0x34, -0xc7, -0xf0, -0xe3, -0x4f, -0xb9, -0x30, -0xea, -0xa2, -0x12, -0xf1, -0x30, -0x2c, -0x36, -0xde, -0x48, -0xf2, -0xb0, -0x4c, -0x43, -0x3f, -0x2e, -0x58, -0xe4, -0x20, -0xe3, -0x58, -0xcd, -0x31, -0x22, -0xf0, -0xa2, -0x2a, -0xe6, -0x19, -0x90, -0x55, -0x86, -0xf6, -0x55, -0x79, -0xd1, -0xd7, -0x46, -0x2f, -0xc0, -0xdc, -0x99, -0xe8, -0xf3, -0x6a, -0xdf, -0x7f, -0xeb, -0x24, -0x4a, -0x1e, -0x5a, -0x75, -0xde, -0x2f, -0x5c, -0x19, -0x61, -0x03, -0x53, -0x54, -0x6a, -0x3b, -0x18, -0x70, -0xb6, -0x4f, -0xf1, -0x9c, -0x0a, -0x59, -0x9d, -0x19, -0x92, -0x65, -0x8c, -0x83, -0x14, -0x2d, -0x44, -0x8a, -0x75, -0xa9, -0xf5, -0x90, -0xd2, -0x66, -0x4e, -0xfa, -0x69, -0x0f, -0x5b, -0x0b, -0x98, -0x65, -0xc8, -0x11, -0x42, -0x59, -0x7f, -0xdd, -0x1b, -0x75, -0x17, -0x31, -0x4c, -0x75, -0x58, -0xeb, -0x58, -0x63, -0x7d, -0xf2, -0xa6, -0xc2, -0x6e, -0xb7, -0x3f, -0x3e, -0x5e, -0x47, -0xad, -0xb7, -0x04, -0xe8, -0x05, -0xf8, -0xb2, -0xcf, -0x19, -0xf3, -0xd2, -0x85, -0xfe, -0x3e, -0x3e, -0xb1, -0x62, -0x08, -0x2c, -0x10, -0x07, -0x0d, -0x73, -0x90, -0x17, -0xfa, -0x9b, -0x56, -0x02, -0x75, -0xf9, -0x51, -0xe0, -0xe9, -0x1a, -0x7b, -0x9f, -0xb3, -0xf3, -0x98, -0xb8, -0x1c, -0x9c, -0xe1, -0xd5, -0x35, -0xae, -0xc8, -0x60, -0x48, -0x11, -0x09, -0x94, -0x6b, -0xd0, -0x8b, -0x15, -0xbc, -0x05, -0x68, -0xd3, -0x54, -0x8a, -0x51, -0x39, -0x5c, -0x42, -0x76, -0xce, -0xd8, -0xad, -0x89, -0x30, -0xc9, -0x05, -0x1c, -0xcc, -0x94, -0x3f, -0x0f, -0x90, -0x6f, -0x72, -0x2d, -0x85, -0x64, -0x9a, -0xb9, -0x23, -0xf9, -0x0b, -0xc3, -0x7c, -0x39, -0x0f, -0x97, -0x07, -0x97, -0xda, -0x58, -0x48, -0x33, -0x05, -0x23, -0xb8, -0x82, -0xe8, -0xd3, -0x53, -0x89, -0xaf, -0x33, -0x80, -0x22, -0x84, -0x0c, -0x95, -0x5c, -0x67, -0xb8, -0x77, -0x0c, -0x5c, -0xa2, -0x5f, -0x3d, -0x58, -0x0f, -0x27, -0xf3, -0x2f, -0xae, -0x48, -0xbd, -0x0b, -0x6f, -0x54, -0xfb, -0x67, -0x4c, -0xea, -0x32, -0x27, -0xf1, -0xfa, -0xe2, -0xb0, -0xec, -0x0b, -0x15, -0xb4, -0x70, -0xf6, -0x5c, -0xdd, -0x71, -0x60, -0xc3, -0xc1, -0xa8, -0x32, -0x65, -0xac, -0x7a, -0x77, -0x41, -0xe5, -0xa9, -0x6b, -0x11, -0x81, -0xfa, -0x34, -0x8d, -0xfb, -0xc1, -0x80, -0x6e, -0xc4, -0x60, -0x30, -0x07, -0xd4, -0x8b, -0x67, -0xbd, -0xaa, -0x8c, -0x9c, -0x64, -0xac, -0xdb, -0x0b, -0x24, -0x8b, -0x63, -0x6f, -0xe6, -0xbc, -0xe7, -0x33, -0xa4, -0x4a, -0x4c, -0xa7, -0x9f, -0x43, -0x53, -0xd2, -0xbb, -0x8f, -0x43, -0xc7, -0x3d, -0x78, -0x68, -0x3f, -0xa5, -0x3d, -0xca, -0x69, -0x84, -0xa6, -0x97, -0x2d, -0xc0, -0x7d, -0x31, -0x34, -0x55, -0x1d, -0x07, -0xb1, -0x5f, -0x40, -0x5c, -0x93, -0xb0, -0xbc, -0x7c, -0xb0, -0xbc, -0xe7, -0x12, -0xee, -0x6b, -0x2b, -0xd3, -0x4d, -0x67, -0x70, -0x3a, -0x9a, -0xf2, -0x3c, -0x7c, -0x81, -0xfa, -0xd7, -0xd9, -0x90, -0x91, -0x81, -0xb8, -0xb1, -0xf3, -0x48, -0x6a, -0x26, -0x4f, -0x0c, -0xce, -0xb0, -0x9e, -0xfd, -0x4a, -0x3a, -0xaf, -0xac, -0x5b, -0x3f, -0xbf, -0x44, -0x5a, -0xa3, -0x19, -0x1e, -0x4b, -0xe7, -0x36, -0x6a, -0xd7, -0x20, -0xae, -0xd7, -0x7d, -0x3b, -0xe7, -0xff, -0x3a, -0x86, -0x2e, -0xd0, -0x4a, -0x3e, -0xaf, -0x9f, -0x8e, -0x01, -0xbf, -0xf8, -0x4f, -0xc1, -0xe8, -0x6f, -0x74, -0xe1, -0x45, -0xd3, -0xf7, -0x04, -0x6a, -0x4b, -0x9d, -0xec, -0x33, -0x27, -0x76, -0xd7, -0xc5, -0xe1, -0xb0, -0x3b, -0x0e, -0x23, -0xec, -0xf0, -0x86, -0xd2, -0x1a, -0xbf, -0x3d, -0x04, -0x62, -0xb3, -0x6c, -0xb2, -0xeb, -0x17, -0x05, -0xa6, -0x0a, -0x8a, -0x7e, -0x83, -0x1c, -0xb6, -0x37, -0x09, -0xc6, -0x0b, -0x70, -0x3c, -0xb5, -0x93, -0x81, -0xd8, -0x93, -0xa0, -0x5f, -0x1e, -0x08, -0xe2, -0xc6, -0xe5, -0xc9, -0x72, -0xf1, -0xf1, -0xc1, -0xed, -0xd5, -0x58, -0x93, -0x83, -0xf8, -0x65, -0x67, -0x2e, -0x0d, -0xa9, -0xf1, -0x64, -0x12, -0xe6, -0x4c, -0xea, -0x15, -0x3f, -0x8c, -0x1a, -0xb6, -0xbf, -0xf6, -0xb9, -0x52, -0x35, -0x09, -0xb0, -0xe6, -0xf7, -0xcd, -0xf1, -0xa5, -0xaa, -0x81, -0xd1, -0x81, -0x6f, -0xb4, -0xa9, -0x66, -0x1f, -0xfc, -0x48, -0xc0, -0xb6, -0xd1, -0x8b, -0x06, -0x2f, -0xf6, -0xef, -0x1f, -0x0a, -0xe6, -0xce, -0x3a, -0x4a, -0x55, -0xbf, -0x6d, -0xf9, -0x4d, -0xd4, -0x08, -0x45, -0x4b, -0xc3, -0x66, -0x19, -0x92, -0x10, -0xe1, -0x17, -0x8e, -0x28, -0x91, -0x16, -0xbf, -0x3c, -0xee, -0xa3, -0xa6, -0x99, -0x92, -0x10, -0xe1, -0xf6, -0xcc, -0xac, -0xb8, -0x65, -0x0b, -0x43, -0x66, -0xf8, -0xe3, -0xe5, -0x3f, -0x24, -0x89, -0x47, -0x5d, -0x78, -0x43, -0xd0, -0x61, -0x17, -0xbd, -0x5b, -0x64, -0x54, -0x08, -0x45, -0x59, -0x93, -0xf6, -0x95, -0x8a, -0x41, -0x51, -0x62, -0x4b, -0x51, -0x02, -0x30, -0x73, -0xc7, -0x87, -0xc5, -0x4b, -0xa2, -0x97, -0x0f, -0xe8, -0x46, -0x5f, -0x7e, -0x2a, -0xe1, -0x30, -0x20, -0xb0, -0xfa, -0xe7, -0xce, -0x61, -0x42, -0x57, -0x6e, -0x21, -0xf3, -0x7a, -0xec, -0xe3, -0x25, -0xc7, -0x25, -0xf3, -0x67, -0xa7, -0x57, -0x40, -0x00, -0x02, -0xcf, -0x1c, -0x80, -0x77, -0x67, -0xbd, -0x70, -0xa1, -0x19, -0x92, -0x31, -0x75, -0x93, -0x27, -0x27, -0xb6, -0x82, -0xe4, -0xeb, -0x1d, -0x78, -0x48, -0xe7, -0xa5, -0x5e, -0x57, -0xef, -0x64, -0x28, -0x64, -0x1b, -0xf6, -0x11, -0xb2, -0x03, -0x9d, -0xb9, -0x18, -0x02, -0x27, -0xf7, -0xbe, -0x9d, -0x55, -0xfc, -0x00, -0xd2, -0xc7, -0xae, -0xad, -0x0b, -0xc5, -0xe9, -0x42, -0x41, -0x48, -0xd8, -0x32, -0xcf, -0xf6, -0x0f, -0xf5, -0xbc, -0x97, -0xc6, -0x99, -0x47, -0x76, -0xbd, -0x89, -0x06, -0x0f, -0x63, -0x0c, -0x51, -0xd4, -0x5e, -0xea, -0x48, -0xa8, -0xa2, -0x56, -0x1c, -0x79, -0x84, -0x86, -0x40, -0x88, -0x41, -0x76, -0x55, -0xfc, -0xc2, -0xd7, -0xfd, -0xc9, -0xc7, -0x80, -0x61, -0x35, -0xa7, -0x43, -0x20, -0xf7, -0xeb, -0x6c, -0x66, -0x13, -0xb0, -0xec, -0x02, -0x75, -0x3e, -0x4b, -0xaf, -0xb9, -0x5d, -0x40, -0xda, -0xd6, -0x6e, -0x2d, -0x39, -0x54, -0xc2, -0x95, -0x35, -0x54, -0x25, -0x72, -0xe1, -0x78, -0xb8, -0xeb, -0xc1, -0x16, -0x58, -0x0f, -0x9c, -0x9b, -0xb4, -0xea, -0x37, -0xec, -0x3b, -0x11, -0xba, -0xd5, -0x8a, -0xa9, -0xe3, -0x98, -0x00, -0x51, -0x1c, -0x14, -0xe0, -0x40, -0x96, -0xe5, -0xe9, -0xf2, -0x21, -0x22, -0xb1, -0x23, -0x60, -0x78, -0xd3, -0x17, -0xf8, -0x7a, -0xa5, -0xa8, -0xba, -0x20, -0xd3, -0x15, -0x1e, -0x32, -0xe4, -0x5e, -0x15, -0x48, -0xae, -0xa9, -0xe5, -0xb8, -0x33, -0xec, -0xe8, -0xa2, -0x42, -0xac, -0xbf, -0x10, -0x84, -0x53, -0x87, -0x19, -0xb4, -0x5f, -0x76, -0x4d, -0x01, -0x9d, -0x56, -0x74, -0xd9, -0x5c, -0x97, -0xe7, -0x88, -0xea, -0x3a, -0xbf, -0xdc, -0x4c, -0x33, -0x8a, -0x16, -0xb9, -0x5b, -0xfa, -0xd8, -0x42, -0xa7, -0xbb, -0x3c, -0x04, -0x27, -0x78, -0x49, -0x81, -0x2a, -0x5a, -0x7d, -0x7c, -0x23, -0xa8, -0xba, -0xf7, -0x9a, -0x9f, -0xd2, -0x66, -0x3e, -0x38, -0x3c, -0x75, -0xf9, -0xd1, -0x30, -0x26, -0x30, -0x6e, -0x5a, -0x6e, -0xdc, -0x6a, -0x69, -0x32, -0x50, -0x33, -0x47, -0x9e, -0xa4, -0xa8, -0x64, -0x66, -0xf0, -0x8a, -0xe4, -0xfd, -0x27, -0x6f, -0x51, -0x25, -0x8b, -0x43, -0x74, -0xc9, -0x8e, -0xbd, -0x88, -0x31, -0xbe, -0xec, -0x65, -0xd2, -0xcb, -0x8d, -0x5a, -0x13, -0x48, -0x16, -0x8c, -0x61, -0x0b, -0x11, -0xf6, -0xc6, -0x66, -0xae, -0xc3, -0xcc, -0x0c, -0xd2, -0xe1, -0x9f, -0x82, -0x41, -0x3f, -0x56, -0xf9, -0x73, -0xef, -0xdc, -0x30, -0x50, -0xcf, -0xb6, -0x7f, -0xbc, -0xd0, -0xb3, -0x10, -0xab, -0x24, -0xe4, -0xec, -0xad, -0x18, -0x8c, -0x39, -0x2d, -0x30, -0x4c, -0xc5, -0x40, -0x0d, -0xf6, -0xac, -0xd6, -0x18, -0x5d, -0x96, -0xbf, -0x5f, -0x71, -0x75, -0x96, -0x22, -0x97, -0x0f, -0x02, -0x94, -0x6e, -0xa6, -0xae, -0x6d, -0x8f, -0x1e, -0xca, -0x12, -0x9b, -0x2a, -0x1c, -0xce, -0xa9, -0xee, -0xfd, -0x12, -0x8e, -0xfc, -0xed, -0x09, -0x33, -0xba, -0xf4, -0x1a, -0x15, -0xf6, -0x9d, -0x87, -0x16, -0x43, -0x7c, -0x78, -0x57, -0xe1, -0x44, -0xc9, -0xeb, -0x1f, -0x58, -0x4d, -0xc1, -0x49, -0x11, -0x5c, -0xb2, -0x11, -0xa8, -0x55, -0x16, -0xf1, -0xc6, -0x50, -0xe9, -0x87, -0x89, -0xf6, -0xcf, -0xd8, -0x9c, -0x51, -0xa7, -0xbc, -0x5b, -0x31, -0x6d, -0x4d, -0x51, -0xd0, -0x4c, -0xbc, -0x0d, -0x58, -0x2d, -0x7b, -0x88, -0x7a, -0xf9, -0x8e, -0xd6, -0x40, -0x4d, -0xbb, -0xbe, -0xc4, -0xe5, -0x07, -0xfc, -0xd9, -0x7b, -0x6d, -0xa6, -0x42, -0x57, -0x8f, -0x02, -0x94, -0x4f, -0xe4, -0x2a, -0x65, -0xe2, -0x19, -0x5a, -0x50, -0xe1, -0x25, -0x65, -0x4a, -0x60, -0xc2, -0xcd, -0xa8, -0xec, -0x05, -0x2e, -0x87, -0x7b, -0x95, -0xb7, -0x4f, -0xa0, -0x0b, -0x1b, -0x4a, -0x7f, -0x92, -0xc8, -0x90, -0xee, -0x89, -0x1e, -0x10, -0xd2, -0x85, -0xe4, -0x9f, -0x63, -0xc8, -0x12, -0xbb, -0x4e, -0xb8, -0xcf, -0x0a, -0xec, -0x18, -0x4e, -0xe6, -0x7c, -0xb3, -0x33, -0x26, -0xc7, -0x1f, -0xd2, -0x04, -0x23, -0xea, -0x07, -0x0c, -0x5f, -0x90, -0xbd, -0xa7, -0x6a, -0x0f, -0x4a, -0xd6, -0x10, -0x01, -0x3c, -0x12, -0x29, -0x2e, -0x96, -0xc0, -0x4d, -0xbb, -0xbe, -0xe5, -0xa7, -0x83, -0xd5, -0x6a, -0x3c, -0xe3, -0x5b, -0xb8, -0xf2, -0x5c, -0x6d, -0x1f, -0xa6, -0xf3, -0x12, -0x24, -0xf6, -0xd6, -0x3b, -0x10, -0x14, -0x09, -0x07, -0x82, -0xe8, -0x30, -0x6a, -0x99, -0xdc, -0x95, -0x01, -0x9c, -0xd4, -0x68, -0x3b, -0xca, -0x98, -0x12, -0xab, -0x77, -0x25, -0x15, -0x7d, -0x10, -0x32, -0x45, -0x98, -0xcd, -0x7a, -0xdf, -0x71, -0x8a, -0x75, -0xc1, -0x1c, -0xd4, -0x68, -0x25, -0xeb, -0xbb, -0x54, -0x27, -0x6f, -0x2a, -0xf7, -0xb9, -0x98, -0x03, -0x27, -0xde, -0x24, -0xa8, -0xbb, -0x98, -0xc2, -0x84, -0xff, -0x9b, -0x51, -0xd8, -0x53, -0x50, -0xda, -0xf5, -0x88, -0xaa, -0x87, -0x2f, -0xae, -0xd6, -0xea, -0x6b, -0xde, -0xc8, -0xd7, -0xa7, -0x28, -0x65, -0x81, -0xe8, -0xb2, -0x3b, -0x1d, -0x4f, -0x75, -0x8f, -0x9f, -0x7a, -0x74, -0x8e, -0xc1, -0x5f, -0x9a, -0xa8, -0x9d, -0xfa, -0x03, -0xa3, -0x71, -0x9b, -0x37, -0x6d, -0xd5, -0x0b, -0xf5, -0xe1, -0xa1, -0x1b, -0x01, -0x6a, -0xc6, -0x67, -0xaa, -0xea, -0x2c, -0x9d, -0xa4, -0xd2, -0x6e, -0xfc, -0xde, -0x2e, -0x7f, -0x94, -0x69, -0xe5, -0x4a, -0xe0, -0x01, -0x48, -0x3c, -0x6b, -0xf7, -0x1e, -0xb6, -0x0b, -0x5f, -0xf9, -0x2e, -0x07, -0xc5, -0xe8, -0xae, -0x37, -0x1b, -0xbc, -0x3c, -0xd8, -0xd5, -0x0b, -0x91, -0x9e, -0x80, -0x24, -0xf5, -0x06, -0x0c, -0x0e, -0x98, -0x07, -0x96, -0x2d, -0x19, -0xdc, -0x58, -0x93, -0xcc, -0xfb, -0x4e, -0xeb, -0xbd, -0x0f, -0xf5, -0xaf, -0x01, -0xfa, -0xf1, -0x7c, -0x43, -0x8c, -0xb8, -0x56, -0x3e, -0xbe, -0x77, -0x4e, -0x2b, -0xf7, -0xbb, -0xb7, -0x45, -0x47, -0xcd, -0xcc, -0xa6, -0x4c, -0x72, -0x7b, -0x6a, -0x2a, -0x70, -0x13, -0x07, -0xfd, -0xb8, -0x9c, -0x98, -0x3a, -0xd8, -0x23, -0x67, -0x5b, -0x34, -0xd5, -0x14, -0x0c, -0xab, -0x77, -0x1f, -0xf8, -0x3d, -0x5a, -0x9f, -0x92, -0xb7, -0x2c, -0xad, -0x31, -0xde, -0x61, -0x07, -0xb3, -0x6b, -0xf7, -0x38, -0x15, -0x95, -0x46, -0x14, -0x48, -0x53, -0x69, -0x52, -0x66, -0x07, -0x6d, -0x83, -0x71, -0x8a, -0x67, -0x25, -0x20, -0x0f, -0xfe, -0xd7, -0x02, -0xd7, -0x6e, -0x2c, -0xd2, -0x1a, -0x0a, -0x5d, -0xfd, -0x0f, -0x74, -0xe3, -0xa4, -0x36, -0x07, -0x9a, -0xdf, -0xd4, -0x79, -0xbf, -0xef, -0x59, -0xc0, -0x44, -0x52, -0x87, -0x9a, -0x6e, -0x1d, -0x0e, -0xee, -0xde, -0x2e, -0x1a, -0xa9, -0x8f, -0x3a, -0xc9, -0xba, -0xec, -0x99, -0x78, -0x2d, -0x55, -0x6b, -0x14, -0xc2, -0x06, -0xd5, -0xfc, -0x93, -0x53, -0x4d, -0x11, -0x8c, -0xf8, -0xfa, -0x79, -0x7c, -0xa6, -0x64, -0xae, -0x61, -0xb8, -0x7b, -0x94, -0x56, -0xa6, -0x39, -0x78, -0x9a, -0xe5, -0xc7, -0xdf, -0x18, -0x63, -0x23, -0x9c, -0xfa, -0x66, -0xbb, -0xb7, -0x5a, -0x27, -0x4c, -0xd1, -0xa1, -0x83, -0x22, -0xb3, -0x52, -0x49, -0x35, -0xb0, -0x22, -0x83, -0x59, -0x12, -0x00, -0x16, -0x98, -0xdd, -0xad, -0xc2, -0x94, -0xf9, -0xd3, -0x7b, -0x64, -0x7f, -0x44, -0x3e, -0x3c, -0x8b, -0x9a, -0x83, -0x9c, -0x69, -0x6b, -0xe4, -0xdf, -0x9f, -0xed, -0x54, -0x1f, -0xe5, -0x5d, -0x7a, -0x05, -0x82, -0xb3, -0xdd, -0xef, -0xfc, -0x53, -0x96, -0xb0, -0x2c, -0x5a, -0xf8, -0xdf, -0x9c, -0x8b, -0x16, -0x4e, -0xdf, -0xda, -0x4d, -0x09, -0x09, -0x69, -0x50, -0x03, -0x65, -0xd8, -0x73, -0x70, -0xe8, -0x86, -0xbf, -0xbb, -0x35, -0xce, -0xb2, -0x46, -0xcb, -0x02, -0x00, -0x5b, -0xb4, -0xe2, -0xc6, -0x8f, -0x2f, -0x98, -0xaf, -0x87, -0x4b, -0x48, -0x45, -0xed, -0xcc, -0x1d, -0xe6, -0x58, -0xd6, -0xf2, -0x50, -0x25, -0x9f, -0x52, -0xc7, -0xcb, -0x8a, -0x17, -0x9d, -0x5b, -0xe5, -0xc8, -0xd7, -0x72, -0xb7, -0x52, -0xb2, -0xc4, -0x98, -0xe3, -0x7a, -0x17, -0x3e, -0xc6, -0x60, -0xa7, -0x97, -0xb0, -0xcf, -0x18, -0x81, -0x53, -0x84, -0x4c, -0xd5, -0x17, -0x32, -0x03, -0x13, -0x39, -0x51, -0x09, -0x10, -0xe3, -0x77, -0x49, -0x4f, -0x62, -0x01, -0xbf, -0x8c, -0x9a, -0xe0, -0x41, -0x9e, -0x89, -0x74, -0x36, -0xf9, -0x96, -0x86, -0x2e, -0x96, -0x1c, -0x4a, -0xb7, -0x2b, -0x4a, -0x97, -0xbc, -0x99, -0x40, -0xa3, -0xe0, -0x3d, -0xc8, -0xad, -0x2f, -0xdf, -0x4f, -0x2c, -0xc4, -0x69, -0x82, -0x9f, -0x9b, -0x81, -0x0c, -0x61, -0x5c, -0xa5, -0x9d, -0x8c, -0x89, -0xc0, -0x2c, -0xb4, -0x4a, -0x33, -0x4e, -0xeb, -0xa2, -0x56, -0x40, -0xc0, -0xc2, -0x46, -0xaf, -0x6a, -0xfc, -0x67, -0xd1, -0x80, -0x5e, -0xc5, -0x6d, -0x84, -0x43, -0x27, -0x3f, -0x55, -0x15, -0x96, -0x6a, -0xa0, -0xa5, -0xda, -0xb7, -0xff, -0xb7, -0x75, -0x6e, -0x4c, -0x49, -0x91, -0x9d, -0x22, -0xa3, -0x46, -0xea, -0xed, -0x9a, -0x00, -0xe2, -0x32, -0xc3, -0xd6, -0xa9, -0x71, -0x20, -0x55, -0xa3, -0x19, -0xed, -0xf8, -0x4f, -0xa7, -0x12, -0x9c, -0x66, -0x87, -0xaf, -0x4e, -0xb7, -0xf0, -0xdb, -0xbf, -0xef, -0xf0, -0xf6, -0xaf, -0xea, -0xda, -0x09, -0xfe, -0xde, -0x38, -0x5c, -0xa5, -0xa2, -0xdf, -0x99, -0x45, -0xa8, -0xe4, -0xe7, -0x92, -0xac, -0x67, -0xaa, -0x4f, -0xbf, -0x77, -0x3e, -0xa2, -0x40, -0x49, -0x22, -0x4a, -0x1e, -0x3b, -0xaa, -0x70, -0x7f, -0x95, -0xaf, -0x37, -0x4b, -0xfc, -0x99, -0xe2, -0xe0, -0xba, -0xd7, -0x34, -0xce, -0x55, -0x88, -0x5b, -0x84, -0x1b, -0x57, -0xc4, -0x80, -0x03, -0x53, -0xc9, -0x2f, -0x93, -0x04, -0x4d, -0xd5, -0x96, -0xe5, -0x70, -0xa6, -0x6e, -0x63, -0x5d, -0x9d, -0x6c, -0xdb, -0x02, -0x0a, -0xa9, -0xda, -0x8b, -0x53, -0xdc, -0xd9, -0x9a, -0xc5, -0x94, -0x2c, -0x91, -0x92, -0x2a, -0xde, -0xbb, -0x8b, -0x13, -0xb9, -0x19, -0x96, -0x64, -0xcc, -0xf2, -0x64, -0x39, -0xb7, -0x75, -0x49, -0xe9, -0x86, -0xc2, -0x86, -0x62, -0xd9, -0x24, -0xd3, -0x81, -0x35, -0x49, -0xfc, -0xa0, -0xa5, -0xa0, -0x93, -0x05, -0x64, -0xb4, -0x1a, -0x57, -0xce, -0x0c, -0x90, -0x02, -0x27, -0xc5, -0x7a, -0x2b, -0x5d, -0xae, -0x3e, -0xd5, -0xdd, -0x10, -0x7c, -0x14, -0xea, -0x3a, -0x08, -0xac, -0x72, -0x4e, -0x90, -0x3d, -0x3b, -0x7c, -0x86, -0x2e, -0xeb, -0xd4, -0x06, -0x70, -0xe6, -0xc7, -0xfb, -0x5f, -0xbd, -0x18, -0xf4, -0x11, -0xa4, -0x1a, -0x93, -0xc3, -0xbe, -0xd9, -0xfb, -0x26, -0x48, -0x2f, -0x37, -0x3c, -0xd0, -0x03, -0x47, -0x1a, -0xf7, -0x62, -0x19, -0x24, -0x5c, -0xf4, -0xa8, -0x92, -0x20, -0x7a, -0xf2, -0x9e, -0x2a, -0xc5, -0x95, -0xa2, -0xfb, -0xa4, -0xea, -0x85, -0xd8, -0x56, -0xb7, -0x70, -0xd1, -0x60, -0x30, -0xa5, -0x30, -0x82, -0x70, -0xdc, -0x7a, -0x65, -0x8a, -0x36, -0x3f, -0x5b, -0x0c, -0xae, -0x54, -0x7c, -0xd3, -0x57, -0x84, -0x7b, -0x3a, -0x65, -0x18, -0x81, -0xee, -0x05, -0x9b, -0x44, -0x4d, -0xb8, -0xda, -0xa2, -0xa1, -0xc9, -0x15, -0xd3, -0x73, -0x03, -0x0e, -0x43, -0xe9, -0x8e, -0x15, -0xf9, -0xbe, -0xc6, -0xc5, -0x8a, -0xe5, -0xc0, -0x1e, -0xc2, -0x37, -0x9e, -0x2a, -0x26, -0xa5, -0xa0, -0xbd, -0x24, -0x5f, -0xb9, -0xc1, -0xab, -0x34, -0x48, -0xb9, -0x5d, -0x98, -0xb4, -0x65, -0x18, -0xf3, -0x63, -0x19, -0x44, -0x1b, -0x11, -0x16, -0xff, -0xdc, -0xf1, -0x79, -0x08, -0x86, -0x0f, -0x52, -0x98, -0x73, -0xc4, -0x92, -0x90, -0x2b, -0x47, -0x09, -0xd0, -0x43, -0x6c, -0x2f, -0x20, -0xeb, -0xdc, -0xda, -0xc5, -0x08, -0x7b, -0x94, -0x42, -0x30, -0x6a, -0xc7, -0xda, -0x8c, -0xc3, -0x76, -0xa7, -0xa5, -0xcc, -0x62, -0x13, -0x00, -0x60, -0x31, -0x58, -0x44, -0x9b, -0xf5, -0x64, -0x14, -0xf5, -0x11, -0xc5, -0x54, -0x52, -0x83, -0xd4, -0x73, -0x01, -0x16, -0x0e, -0xb3, -0x7a, -0x29, -0x69, -0x35, -0x56, -0xd4, -0xee, -0x8a, -0x17, -0xa2, -0x99, -0x24, -0x9c, -0xd7, -0x8f, -0xdb, -0x55, -0xb5, -0x3e +// clang-format off + +const uint8_t firmware_data[FIRMWARE_LENGTH] PROGMEM = { + 0x03, 0xA6, 0x68, 0x1E, 0x7D, 0x10, 0x7E, 0x7E, 0x5F, 0x1C, 0xB8, 0xF2, 0x47, 0x0C, 0x7B, 0x74, + 0x4B, 0x14, 0x8B, 0x75, 0x66, 0x51, 0x0B, 0x8C, 0x76, 0x74, 0x4B, 0x14, 0xAA, 0xD6, 0x0F, 0x9C, + 0xBA, 0xF6, 0x6E, 0x3F, 0xDD, 0x38, 0xD5, 0x02, 0x80, 0x9B, 0x82, 0x6D, 0x58, 0x13, 0xA4, 0xAB, + 0xB5, 0xC9, 0x10, 0xA2, 0xC6, 0x0A, 0x7F, 0x5D, 0x19, 0x91, 0xA0, 0xA3, 0xCE, 0xEB, 0x3E, 0xC9, + 0xF1, 0x60, 0x42, 0xE7, 0x4C, 0xFB, 0x74, 0x6A, 0x56, 0x2E, 0xBF, 0xDD, 0x38, 0xD3, 0x05, 0x88, + 0x92, 0xA6, 0xCE, 0xFF, 0x5D, 0x38, 0xD1, 0xCF, 0xEF, 0x58, 0xCB, 0x65, 0x48, 0xF0, 0x35, 0x85, + 0xA9, 0xB2, 0x8F, 0x5E, 0xF3, 0x80, 0x94, 0x97, 0x7E, 0x75, 0x97, 0x87, 0x73, 0x13, 0xB0, 0x8A, + 0x69, 0xD4, 0x0A, 0xDE, 0xC1, 0x79, 0x59, 0x36, 0xDB, 0x9D, 0xD6, 0xB8, 0x15, 0x6F, 0xCE, 0x3C, + 0x72, 0x32, 0x45, 0x88, 0xDF, 0x6C, 0xA5, 0x6D, 0xE8, 0x76, 0x96, 0x14, 0x74, 0x20, 0xDC, 0xF4, + 0xFA, 0x37, 0x6A, 0x27, 0x32, 0xE3, 0x29, 0xBF, 0xC4, 0xC7, 0x06, 0x9D, 0x58, 0xE7, 0x87, 0x7C, + 0x2E, 0x9F, 0x6E, 0x49, 0x07, 0x5D, 0x23, 0x64, 0x54, 0x83, 0x6E, 0xCB, 0xB7, 0x77, 0xF7, 0x2B, + 0x6E, 0x0F, 0x2E, 0x66, 0x12, 0x60, 0x55, 0x65, 0xFC, 0x43, 0xB3, 0x58, 0x73, 0x5B, 0xE8, 0x67, + 0x04, 0x43, 0x02, 0xDE, 0xB3, 0x89, 0xA0, 0x6D, 0x3A, 0x27, 0x79, 0x64, 0x5B, 0x0C, 0x16, 0x9E, + 0x66, 0xB1, 0x8B, 0x87, 0x0C, 0x5D, 0xF2, 0xB6, 0x3D, 0x71, 0xDF, 0x42, 0x03, 0x8A, 0x06, 0x8D, + 0xEF, 0x1D, 0xA8, 0x96, 0x5C, 0xED, 0x31, 0x61, 0x5C, 0xA1, 0x34, 0xF6, 0x8C, 0x08, 0x60, 0x33, + 0x07, 0x00, 0x3E, 0x79, 0x95, 0x1B, 0x43, 0x7F, 0xFE, 0xB6, 0xA6, 0xD4, 0x9D, 0x76, 0x72, 0xBF, + 0xAD, 0xC0, 0x15, 0xE8, 0x37, 0x31, 0xA3, 0x72, 0x63, 0x52, 0x1D, 0x1C, 0x5D, 0x51, 0x1B, 0xE1, + 0xA9, 0xED, 0x60, 0x32, 0x3E, 0xA9, 0x50, 0x28, 0x53, 0x06, 0x59, 0xE2, 0xFC, 0xE7, 0x02, 0x64, + 0x39, 0x21, 0x56, 0x4A, 0xA5, 0x40, 0x80, 0x81, 0xD5, 0x5A, 0x60, 0x7B, 0x68, 0x84, 0xF1, 0xE0, + 0xB1, 0xB6, 0x5B, 0xDF, 0xA8, 0x1D, 0x6D, 0x65, 0x20, 0xC0, 0xA2, 0xB9, 0xD9, 0xBB, 0x00, 0xA6, + 0xDB, 0x8B, 0x01, 0x53, 0x91, 0xFE, 0xC4, 0x51, 0x85, 0xB0, 0x96, 0x7F, 0xFD, 0x51, 0xDD, 0x14, + 0x03, 0x67, 0x2E, 0x75, 0x1C, 0x76, 0xD3, 0x6E, 0xDD, 0x99, 0x55, 0x76, 0xE5, 0xAB, 0x23, 0xFC, + 0x4A, 0xD5, 0xC6, 0xE8, 0x2E, 0xCA, 0x8A, 0xB3, 0xF6, 0x8C, 0x6C, 0xB0, 0xE9, 0xF2, 0xE7, 0x9E, + 0x69, 0x41, 0xED, 0xF1, 0x6D, 0xD2, 0x86, 0xD8, 0x7E, 0xCB, 0x5D, 0x47, 0x6C, 0x85, 0x6A, 0x23, + 0xED, 0x20, 0x40, 0x93, 0xB4, 0x20, 0xC7, 0xA5, 0xC9, 0xAF, 0x03, 0x15, 0xAC, 0x19, 0xE5, 0x2A, + 0x36, 0xDF, 0x6D, 0xC5, 0x8C, 0x80, 0x07, 0xCE, 0x92, 0x0C, 0xD8, 0x06, 0x62, 0x0F, 0xDD, 0x48, + 0x46, 0x1A, 0x53, 0xC7, 0x8A, 0x8C, 0x5D, 0x5D, 0xB4, 0xA1, 0x02, 0xD3, 0xA9, 0xB8, 0xF3, 0x94, + 0x8F, 0x3F, 0xE5, 0x54, 0xD4, 0x11, 0x65, 0xB2, 0x5E, 0x09, 0x0B, 0x81, 0xE3, 0x75, 0xA7, 0x89, + 0x81, 0x39, 0x6C, 0x46, 0xF6, 0x06, 0x9F, 0x27, 0x3B, 0xB6, 0x2D, 0x5F, 0x1D, 0x4B, 0xD4, 0x7B, + 0x1D, 0x61, 0x74, 0x89, 0xE4, 0xE3, 0xBD, 0x98, 0x1B, 0xC4, 0x51, 0x3B, 0xA4, 0xFA, 0xE0, 0x92, + 0xF7, 0xBE, 0xF2, 0x4D, 0xBB, 0xFF, 0xAD, 0x4F, 0x6D, 0x68, 0xC2, 0x79, 0x40, 0xAA, 0x9B, 0x8F, + 0x0C, 0x32, 0x4B, 0x5F, 0x3E, 0xAB, 0x59, 0x98, 0xB3, 0xF5, 0x1D, 0xAC, 0x5E, 0xBC, 0x78, 0xD3, + 0x01, 0x6C, 0x64, 0x15, 0x2F, 0xD8, 0x71, 0xA6, 0x2D, 0x45, 0xE1, 0x22, 0x42, 0xE4, 0x4E, 0x04, + 0x3C, 0x7D, 0xF4, 0x40, 0x21, 0xB4, 0x67, 0x05, 0xA8, 0xE2, 0xF3, 0x72, 0x87, 0x4C, 0x7D, 0xD9, + 0x1B, 0x65, 0x97, 0xF3, 0xC2, 0xE3, 0xE4, 0xC8, 0xD2, 0xDE, 0xF6, 0xEF, 0xDC, 0xBB, 0x44, 0x08, + 0x5E, 0xE2, 0x45, 0x27, 0x01, 0xB0, 0xF6, 0x43, 0xE7, 0x3A, 0xF6, 0xDC, 0x9D, 0xED, 0xF3, 0xC5, + 0x0C, 0xB8, 0x9C, 0x98, 0x3A, 0xD8, 0x36, 0xEE, 0x96, 0x72, 0x67, 0xE7, 0x81, 0x91, 0xD5, 0x05, + 0x0A, 0xE0, 0x82, 0xD5, 0x8F, 0xE8, 0xF9, 0xB0, 0xC9, 0xCF, 0x93, 0xE7, 0x04, 0xC5, 0xBC, 0x2B, + 0x43, 0x56, 0x7E, 0xE8, 0x67, 0x7C, 0xE5, 0xFB, 0x49, 0xAD, 0x5E, 0x9F, 0x25, 0x13, 0xDE, 0x6E, + 0x6E, 0xE9, 0xF1, 0xEC, 0x87, 0x0B, 0x59, 0x81, 0x76, 0x84, 0x76, 0xB3, 0x24, 0xAF, 0x30, 0xFD, + 0x27, 0x8B, 0xAB, 0xD8, 0x00, 0x8B, 0x9B, 0x0C, 0xD2, 0xB2, 0x4E, 0x5E, 0x9D, 0x1D, 0x96, 0x01, + 0x00, 0x67, 0xC1, 0x5F, 0x02, 0x20, 0xFD, 0x45, 0x6A, 0x01, 0x60, 0x58, 0x45, 0xCA, 0x47, 0x21, + 0x90, 0x5A, 0xC4, 0x43, 0x26, 0x1A, 0xD7, 0xA5, 0x4A, 0xB2, 0x5D, 0x2B, 0x35, 0x49, 0xFB, 0xA5, + 0x17, 0x92, 0x21, 0x1E, 0x93, 0x96, 0x67, 0xA2, 0x7E, 0x36, 0x7A, 0xDE, 0x5F, 0xBE, 0x7A, 0x58, + 0x9D, 0xF8, 0x78, 0xA3, 0xFA, 0xC8, 0xD5, 0x17, 0xF0, 0x21, 0x97, 0x8C, 0x80, 0xB5, 0x4B, 0x3B, + 0xBD, 0xBB, 0x41, 0x21, 0xA8, 0x50, 0x67, 0xF7, 0xE7, 0x19, 0x80, 0x10, 0x8E, 0xCE, 0x04, 0x18, + 0x3F, 0x51, 0x6B, 0x77, 0xD8, 0x9E, 0x16, 0xAF, 0xEC, 0xEF, 0x48, 0x16, 0x4D, 0x9E, 0x85, 0x38, + 0x18, 0x3E, 0xD4, 0x28, 0x87, 0x60, 0x2A, 0xF6, 0x7F, 0x09, 0x86, 0x6F, 0x9C, 0x3C, 0x3A, 0xFF, + 0xAB, 0xD0, 0x61, 0xA2, 0x97, 0x0D, 0x71, 0x94, 0x7E, 0xFD, 0xB9, 0x80, 0x02, 0x89, 0x6A, 0xB3, + 0x84, 0x6C, 0x2A, 0x77, 0x62, 0xBE, 0x0B, 0xF4, 0xAF, 0xAC, 0x7B, 0x7C, 0x8E, 0xCA, 0x01, 0xBA, + 0x71, 0x78, 0x94, 0xFD, 0xB5, 0x39, 0xA4, 0x4D, 0x2F, 0x78, 0xCF, 0xCA, 0x92, 0x0C, 0x1A, 0x99, + 0x48, 0x4C, 0x11, 0x96, 0xB5, 0x4E, 0x41, 0x28, 0xE4, 0xA6, 0xFE, 0x4B, 0x72, 0x91, 0xE7, 0xD4, + 0xDD, 0x9F, 0x12, 0xE6, 0x29, 0x38, 0xCE, 0x45, 0xAE, 0x02, 0xB8, 0x24, 0xAE, 0xBD, 0xE9, 0x66, + 0x08, 0x62, 0xA2, 0x2C, 0x2B, 0x00, 0xE2, 0x23, 0xD9, 0xC4, 0x48, 0xE4, 0xD3, 0xAC, 0xBB, 0x34, + 0xC7, 0xF0, 0xE3, 0x4F, 0xB9, 0x30, 0xEA, 0xA2, 0x12, 0xF1, 0x30, 0x2C, 0x36, 0xDE, 0x48, 0xF2, + 0xB0, 0x4C, 0x43, 0x3F, 0x2E, 0x58, 0xE4, 0x20, 0xE3, 0x58, 0xCD, 0x31, 0x22, 0xF0, 0xA2, 0x2A, + 0xE6, 0x19, 0x90, 0x55, 0x86, 0xF6, 0x55, 0x79, 0xD1, 0xD7, 0x46, 0x2F, 0xC0, 0xDC, 0x99, 0xE8, + 0xF3, 0x6A, 0xDF, 0x7F, 0xEB, 0x24, 0x4A, 0x1E, 0x5A, 0x75, 0xDE, 0x2F, 0x5C, 0x19, 0x61, 0x03, + 0x53, 0x54, 0x6A, 0x3B, 0x18, 0x70, 0xB6, 0x4F, 0xF1, 0x9C, 0x0A, 0x59, 0x9D, 0x19, 0x92, 0x65, + 0x8C, 0x83, 0x14, 0x2D, 0x44, 0x8A, 0x75, 0xA9, 0xF5, 0x90, 0xD2, 0x66, 0x4E, 0xFA, 0x69, 0x0F, + 0x5B, 0x0B, 0x98, 0x65, 0xC8, 0x11, 0x42, 0x59, 0x7F, 0xDD, 0x1B, 0x75, 0x17, 0x31, 0x4C, 0x75, + 0x58, 0xEB, 0x58, 0x63, 0x7D, 0xF2, 0xA6, 0xC2, 0x6E, 0xB7, 0x3F, 0x3E, 0x5E, 0x47, 0xAD, 0xB7, + 0x04, 0xE8, 0x05, 0xF8, 0xB2, 0xCF, 0x19, 0xF3, 0xD2, 0x85, 0xFE, 0x3E, 0x3E, 0xB1, 0x62, 0x08, + 0x2C, 0x10, 0x07, 0x0D, 0x73, 0x90, 0x17, 0xFA, 0x9B, 0x56, 0x02, 0x75, 0xF9, 0x51, 0xE0, 0xE9, + 0x1A, 0x7B, 0x9F, 0xB3, 0xF3, 0x98, 0xB8, 0x1C, 0x9C, 0xE1, 0xD5, 0x35, 0xAE, 0xC8, 0x60, 0x48, + 0x11, 0x09, 0x94, 0x6B, 0xD0, 0x8B, 0x15, 0xBC, 0x05, 0x68, 0xD3, 0x54, 0x8A, 0x51, 0x39, 0x5C, + 0x42, 0x76, 0xCE, 0xD8, 0xAD, 0x89, 0x30, 0xC9, 0x05, 0x1C, 0xCC, 0x94, 0x3F, 0x0F, 0x90, 0x6F, + 0x72, 0x2D, 0x85, 0x64, 0x9A, 0xB9, 0x23, 0xF9, 0x0B, 0xC3, 0x7C, 0x39, 0x0F, 0x97, 0x07, 0x97, + 0xDA, 0x58, 0x48, 0x33, 0x05, 0x23, 0xB8, 0x82, 0xE8, 0xD3, 0x53, 0x89, 0xAF, 0x33, 0x80, 0x22, + 0x84, 0x0C, 0x95, 0x5C, 0x67, 0xB8, 0x77, 0x0C, 0x5C, 0xA2, 0x5F, 0x3D, 0x58, 0x0F, 0x27, 0xF3, + 0x2F, 0xAE, 0x48, 0xBD, 0x0B, 0x6F, 0x54, 0xFB, 0x67, 0x4C, 0xEA, 0x32, 0x27, 0xF1, 0xFA, 0xE2, + 0xB0, 0xEC, 0x0B, 0x15, 0xB4, 0x70, 0xF6, 0x5C, 0xDD, 0x71, 0x60, 0xC3, 0xC1, 0xA8, 0x32, 0x65, + 0xAC, 0x7A, 0x77, 0x41, 0xE5, 0xA9, 0x6B, 0x11, 0x81, 0xFA, 0x34, 0x8D, 0xFB, 0xC1, 0x80, 0x6E, + 0xC4, 0x60, 0x30, 0x07, 0xD4, 0x8B, 0x67, 0xBD, 0xAA, 0x8C, 0x9C, 0x64, 0xAC, 0xDB, 0x0B, 0x24, + 0x8B, 0x63, 0x6F, 0xE6, 0xBC, 0xE7, 0x33, 0xA4, 0x4A, 0x4C, 0xA7, 0x9F, 0x43, 0x53, 0xD2, 0xBB, + 0x8F, 0x43, 0xC7, 0x3D, 0x78, 0x68, 0x3F, 0xA5, 0x3D, 0xCA, 0x69, 0x84, 0xA6, 0x97, 0x2D, 0xC0, + 0x7D, 0x31, 0x34, 0x55, 0x1D, 0x07, 0xB1, 0x5F, 0x40, 0x5C, 0x93, 0xB0, 0xBC, 0x7C, 0xB0, 0xBC, + 0xE7, 0x12, 0xEE, 0x6B, 0x2B, 0xD3, 0x4D, 0x67, 0x70, 0x3A, 0x9A, 0xF2, 0x3C, 0x7C, 0x81, 0xFA, + 0xD7, 0xD9, 0x90, 0x91, 0x81, 0xB8, 0xB1, 0xF3, 0x48, 0x6A, 0x26, 0x4F, 0x0C, 0xCE, 0xB0, 0x9E, + 0xFD, 0x4A, 0x3A, 0xAF, 0xAC, 0x5B, 0x3F, 0xBF, 0x44, 0x5A, 0xA3, 0x19, 0x1E, 0x4B, 0xE7, 0x36, + 0x6A, 0xD7, 0x20, 0xAE, 0xD7, 0x7D, 0x3B, 0xE7, 0xFF, 0x3A, 0x86, 0x2E, 0xD0, 0x4A, 0x3E, 0xAF, + 0x9F, 0x8E, 0x01, 0xBF, 0xF8, 0x4F, 0xC1, 0xE8, 0x6F, 0x74, 0xE1, 0x45, 0xD3, 0xF7, 0x04, 0x6A, + 0x4B, 0x9D, 0xEC, 0x33, 0x27, 0x76, 0xD7, 0xC5, 0xE1, 0xB0, 0x3B, 0x0E, 0x23, 0xEC, 0xF0, 0x86, + 0xD2, 0x1A, 0xBF, 0x3D, 0x04, 0x62, 0xB3, 0x6C, 0xB2, 0xEB, 0x17, 0x05, 0xA6, 0x0A, 0x8A, 0x7E, + 0x83, 0x1C, 0xB6, 0x37, 0x09, 0xC6, 0x0B, 0x70, 0x3C, 0xB5, 0x93, 0x81, 0xD8, 0x93, 0xA0, 0x5F, + 0x1E, 0x08, 0xE2, 0xC6, 0xE5, 0xC9, 0x72, 0xF1, 0xF1, 0xC1, 0xED, 0xD5, 0x58, 0x93, 0x83, 0xF8, + 0x65, 0x67, 0x2E, 0x0D, 0xA9, 0xF1, 0x64, 0x12, 0xE6, 0x4C, 0xEA, 0x15, 0x3F, 0x8C, 0x1A, 0xB6, + 0xBF, 0xF6, 0xB9, 0x52, 0x35, 0x09, 0xB0, 0xE6, 0xF7, 0xCD, 0xF1, 0xA5, 0xAA, 0x81, 0xD1, 0x81, + 0x6F, 0xB4, 0xA9, 0x66, 0x1F, 0xFC, 0x48, 0xC0, 0xB6, 0xD1, 0x8B, 0x06, 0x2F, 0xF6, 0xEF, 0x1F, + 0x0A, 0xE6, 0xCE, 0x3A, 0x4A, 0x55, 0xBF, 0x6D, 0xF9, 0x4D, 0xD4, 0x08, 0x45, 0x4B, 0xC3, 0x66, + 0x19, 0x92, 0x10, 0xE1, 0x17, 0x8E, 0x28, 0x91, 0x16, 0xBF, 0x3C, 0xEE, 0xA3, 0xA6, 0x99, 0x92, + 0x10, 0xE1, 0xF6, 0xCC, 0xAC, 0xB8, 0x65, 0x0B, 0x43, 0x66, 0xF8, 0xE3, 0xE5, 0x3F, 0x24, 0x89, + 0x47, 0x5D, 0x78, 0x43, 0xD0, 0x61, 0x17, 0xBD, 0x5B, 0x64, 0x54, 0x08, 0x45, 0x59, 0x93, 0xF6, + 0x95, 0x8A, 0x41, 0x51, 0x62, 0x4B, 0x51, 0x02, 0x30, 0x73, 0xC7, 0x87, 0xC5, 0x4B, 0xA2, 0x97, + 0x0F, 0xE8, 0x46, 0x5F, 0x7E, 0x2A, 0xE1, 0x30, 0x20, 0xB0, 0xFA, 0xE7, 0xCE, 0x61, 0x42, 0x57, + 0x6E, 0x21, 0xF3, 0x7A, 0xEC, 0xE3, 0x25, 0xC7, 0x25, 0xF3, 0x67, 0xA7, 0x57, 0x40, 0x00, 0x02, + 0xCF, 0x1C, 0x80, 0x77, 0x67, 0xBD, 0x70, 0xA1, 0x19, 0x92, 0x31, 0x75, 0x93, 0x27, 0x27, 0xB6, + 0x82, 0xE4, 0xEB, 0x1D, 0x78, 0x48, 0xE7, 0xA5, 0x5E, 0x57, 0xEF, 0x64, 0x28, 0x64, 0x1B, 0xF6, + 0x11, 0xB2, 0x03, 0x9D, 0xB9, 0x18, 0x02, 0x27, 0xF7, 0xBE, 0x9D, 0x55, 0xFC, 0x00, 0xD2, 0xC7, + 0xAE, 0xAD, 0x0B, 0xC5, 0xE9, 0x42, 0x41, 0x48, 0xD8, 0x32, 0xCF, 0xF6, 0x0F, 0xF5, 0xBC, 0x97, + 0xC6, 0x99, 0x47, 0x76, 0xBD, 0x89, 0x06, 0x0F, 0x63, 0x0C, 0x51, 0xD4, 0x5E, 0xEA, 0x48, 0xA8, + 0xA2, 0x56, 0x1C, 0x79, 0x84, 0x86, 0x40, 0x88, 0x41, 0x76, 0x55, 0xFC, 0xC2, 0xD7, 0xFD, 0xC9, + 0xC7, 0x80, 0x61, 0x35, 0xA7, 0x43, 0x20, 0xF7, 0xEB, 0x6C, 0x66, 0x13, 0xB0, 0xEC, 0x02, 0x75, + 0x3E, 0x4B, 0xAF, 0xB9, 0x5D, 0x40, 0xDA, 0xD6, 0x6E, 0x2D, 0x39, 0x54, 0xC2, 0x95, 0x35, 0x54, + 0x25, 0x72, 0xE1, 0x78, 0xB8, 0xEB, 0xC1, 0x16, 0x58, 0x0F, 0x9C, 0x9B, 0xB4, 0xEA, 0x37, 0xEC, + 0x3B, 0x11, 0xBA, 0xD5, 0x8A, 0xA9, 0xE3, 0x98, 0x00, 0x51, 0x1C, 0x14, 0xE0, 0x40, 0x96, 0xE5, + 0xE9, 0xF2, 0x21, 0x22, 0xB1, 0x23, 0x60, 0x78, 0xD3, 0x17, 0xF8, 0x7A, 0xA5, 0xA8, 0xBA, 0x20, + 0xD3, 0x15, 0x1E, 0x32, 0xE4, 0x5E, 0x15, 0x48, 0xAE, 0xA9, 0xE5, 0xB8, 0x33, 0xEC, 0xE8, 0xA2, + 0x42, 0xAC, 0xBF, 0x10, 0x84, 0x53, 0x87, 0x19, 0xB4, 0x5F, 0x76, 0x4D, 0x01, 0x9D, 0x56, 0x74, + 0xD9, 0x5C, 0x97, 0xE7, 0x88, 0xEA, 0x3A, 0xBF, 0xDC, 0x4C, 0x33, 0x8A, 0x16, 0xB9, 0x5B, 0xFA, + 0xD8, 0x42, 0xA7, 0xBB, 0x3C, 0x04, 0x27, 0x78, 0x49, 0x81, 0x2A, 0x5A, 0x7D, 0x7C, 0x23, 0xA8, + 0xBA, 0xF7, 0x9A, 0x9F, 0xD2, 0x66, 0x3E, 0x38, 0x3C, 0x75, 0xF9, 0xD1, 0x30, 0x26, 0x30, 0x6E, + 0x5A, 0x6E, 0xDC, 0x6A, 0x69, 0x32, 0x50, 0x33, 0x47, 0x9E, 0xA4, 0xA8, 0x64, 0x66, 0xF0, 0x8A, + 0xE4, 0xFD, 0x27, 0x6F, 0x51, 0x25, 0x8B, 0x43, 0x74, 0xC9, 0x8E, 0xBD, 0x88, 0x31, 0xBE, 0xEC, + 0x65, 0xD2, 0xCB, 0x8D, 0x5A, 0x13, 0x48, 0x16, 0x8C, 0x61, 0x0B, 0x11, 0xF6, 0xC6, 0x66, 0xAE, + 0xC3, 0xCC, 0x0C, 0xD2, 0xE1, 0x9F, 0x82, 0x41, 0x3F, 0x56, 0xF9, 0x73, 0xEF, 0xDC, 0x30, 0x50, + 0xCF, 0xB6, 0x7F, 0xBC, 0xD0, 0xB3, 0x10, 0xAB, 0x24, 0xE4, 0xEC, 0xAD, 0x18, 0x8C, 0x39, 0x2D, + 0x30, 0x4C, 0xC5, 0x40, 0x0D, 0xF6, 0xAC, 0xD6, 0x18, 0x5D, 0x96, 0xBF, 0x5F, 0x71, 0x75, 0x96, + 0x22, 0x97, 0x0F, 0x02, 0x94, 0x6E, 0xA6, 0xAE, 0x6D, 0x8F, 0x1E, 0xCA, 0x12, 0x9B, 0x2A, 0x1C, + 0xCE, 0xA9, 0xEE, 0xFD, 0x12, 0x8E, 0xFC, 0xED, 0x09, 0x33, 0xBA, 0xF4, 0x1A, 0x15, 0xF6, 0x9D, + 0x87, 0x16, 0x43, 0x7C, 0x78, 0x57, 0xE1, 0x44, 0xC9, 0xEB, 0x1F, 0x58, 0x4D, 0xC1, 0x49, 0x11, + 0x5C, 0xB2, 0x11, 0xA8, 0x55, 0x16, 0xF1, 0xC6, 0x50, 0xE9, 0x87, 0x89, 0xF6, 0xCF, 0xD8, 0x9C, + 0x51, 0xA7, 0xBC, 0x5B, 0x31, 0x6D, 0x4D, 0x51, 0xD0, 0x4C, 0xBC, 0x0D, 0x58, 0x2D, 0x7B, 0x88, + 0x7A, 0xF9, 0x8E, 0xD6, 0x40, 0x4D, 0xBB, 0xBE, 0xC4, 0xE5, 0x07, 0xFC, 0xD9, 0x7B, 0x6D, 0xA6, + 0x42, 0x57, 0x8F, 0x02, 0x94, 0x4F, 0xE4, 0x2A, 0x65, 0xE2, 0x19, 0x5A, 0x50, 0xE1, 0x25, 0x65, + 0x4A, 0x60, 0xC2, 0xCD, 0xA8, 0xEC, 0x05, 0x2E, 0x87, 0x7B, 0x95, 0xB7, 0x4F, 0xA0, 0x0B, 0x1B, + 0x4A, 0x7F, 0x92, 0xC8, 0x90, 0xEE, 0x89, 0x1E, 0x10, 0xD2, 0x85, 0xE4, 0x9F, 0x63, 0xC8, 0x12, + 0xBB, 0x4E, 0xB8, 0xCF, 0x0A, 0xEC, 0x18, 0x4E, 0xE6, 0x7C, 0xB3, 0x33, 0x26, 0xC7, 0x1F, 0xD2, + 0x04, 0x23, 0xEA, 0x07, 0x0C, 0x5F, 0x90, 0xBD, 0xA7, 0x6A, 0x0F, 0x4A, 0xD6, 0x10, 0x01, 0x3C, + 0x12, 0x29, 0x2E, 0x96, 0xC0, 0x4D, 0xBB, 0xBE, 0xE5, 0xA7, 0x83, 0xD5, 0x6A, 0x3C, 0xE3, 0x5B, + 0xB8, 0xF2, 0x5C, 0x6D, 0x1F, 0xA6, 0xF3, 0x12, 0x24, 0xF6, 0xD6, 0x3B, 0x10, 0x14, 0x09, 0x07, + 0x82, 0xE8, 0x30, 0x6A, 0x99, 0xDC, 0x95, 0x01, 0x9C, 0xD4, 0x68, 0x3B, 0xCA, 0x98, 0x12, 0xAB, + 0x77, 0x25, 0x15, 0x7D, 0x10, 0x32, 0x45, 0x98, 0xCD, 0x7A, 0xDF, 0x71, 0x8A, 0x75, 0xC1, 0x1C, + 0xD4, 0x68, 0x25, 0xEB, 0xBB, 0x54, 0x27, 0x6F, 0x2A, 0xF7, 0xB9, 0x98, 0x03, 0x27, 0xDE, 0x24, + 0xA8, 0xBB, 0x98, 0xC2, 0x84, 0xFF, 0x9B, 0x51, 0xD8, 0x53, 0x50, 0xDA, 0xF5, 0x88, 0xAA, 0x87, + 0x2F, 0xAE, 0xD6, 0xEA, 0x6B, 0xDE, 0xC8, 0xD7, 0xA7, 0x28, 0x65, 0x81, 0xE8, 0xB2, 0x3B, 0x1D, + 0x4F, 0x75, 0x8F, 0x9F, 0x7A, 0x74, 0x8E, 0xC1, 0x5F, 0x9A, 0xA8, 0x9D, 0xFA, 0x03, 0xA3, 0x71, + 0x9B, 0x37, 0x6D, 0xD5, 0x0B, 0xF5, 0xE1, 0xA1, 0x1B, 0x01, 0x6A, 0xC6, 0x67, 0xAA, 0xEA, 0x2C, + 0x9D, 0xA4, 0xD2, 0x6E, 0xFC, 0xDE, 0x2E, 0x7F, 0x94, 0x69, 0xE5, 0x4A, 0xE0, 0x01, 0x48, 0x3C, + 0x6B, 0xF7, 0x1E, 0xB6, 0x0B, 0x5F, 0xF9, 0x2E, 0x07, 0xC5, 0xE8, 0xAE, 0x37, 0x1B, 0xBC, 0x3C, + 0xD8, 0xD5, 0x0B, 0x91, 0x9E, 0x80, 0x24, 0xF5, 0x06, 0x0C, 0x0E, 0x98, 0x07, 0x96, 0x2D, 0x19, + 0xDC, 0x58, 0x93, 0xCC, 0xFB, 0x4E, 0xEB, 0xBD, 0x0F, 0xF5, 0xAF, 0x01, 0xFA, 0xF1, 0x7C, 0x43, + 0x8C, 0xB8, 0x56, 0x3E, 0xBE, 0x77, 0x4E, 0x2B, 0xF7, 0xBB, 0xB7, 0x45, 0x47, 0xCD, 0xCC, 0xA6, + 0x4C, 0x72, 0x7B, 0x6A, 0x2A, 0x70, 0x13, 0x07, 0xFD, 0xB8, 0x9C, 0x98, 0x3A, 0xD8, 0x23, 0x67, + 0x5B, 0x34, 0xD5, 0x14, 0x0C, 0xAB, 0x77, 0x1F, 0xF8, 0x3D, 0x5A, 0x9F, 0x92, 0xB7, 0x2C, 0xAD, + 0x31, 0xDE, 0x61, 0x07, 0xB3, 0x6B, 0xF7, 0x38, 0x15, 0x95, 0x46, 0x14, 0x48, 0x53, 0x69, 0x52, + 0x66, 0x07, 0x6D, 0x83, 0x71, 0x8A, 0x67, 0x25, 0x20, 0x0F, 0xFE, 0xD7, 0x02, 0xD7, 0x6E, 0x2C, + 0xD2, 0x1A, 0x0A, 0x5D, 0xFD, 0x0F, 0x74, 0xE3, 0xA4, 0x36, 0x07, 0x9A, 0xDF, 0xD4, 0x79, 0xBF, + 0xEF, 0x59, 0xC0, 0x44, 0x52, 0x87, 0x9A, 0x6E, 0x1D, 0x0E, 0xEE, 0xDE, 0x2E, 0x1A, 0xA9, 0x8F, + 0x3A, 0xC9, 0xBA, 0xEC, 0x99, 0x78, 0x2D, 0x55, 0x6B, 0x14, 0xC2, 0x06, 0xD5, 0xFC, 0x93, 0x53, + 0x4D, 0x11, 0x8C, 0xF8, 0xFA, 0x79, 0x7C, 0xA6, 0x64, 0xAE, 0x61, 0xB8, 0x7B, 0x94, 0x56, 0xA6, + 0x39, 0x78, 0x9A, 0xE5, 0xC7, 0xDF, 0x18, 0x63, 0x23, 0x9C, 0xFA, 0x66, 0xBB, 0xB7, 0x5A, 0x27, + 0x4C, 0xD1, 0xA1, 0x83, 0x22, 0xB3, 0x52, 0x49, 0x35, 0xB0, 0x22, 0x83, 0x59, 0x12, 0x00, 0x16, + 0x98, 0xDD, 0xAD, 0xC2, 0x94, 0xF9, 0xD3, 0x7B, 0x64, 0x7F, 0x44, 0x3E, 0x3C, 0x8B, 0x9A, 0x83, + 0x9C, 0x69, 0x6B, 0xE4, 0xDF, 0x9F, 0xED, 0x54, 0x1F, 0xE5, 0x5D, 0x7A, 0x05, 0x82, 0xB3, 0xDD, + 0xEF, 0xFC, 0x53, 0x96, 0xB0, 0x2C, 0x5A, 0xF8, 0xDF, 0x9C, 0x8B, 0x16, 0x4E, 0xDF, 0xDA, 0x4D, + 0x09, 0x09, 0x69, 0x50, 0x03, 0x65, 0xD8, 0x73, 0x70, 0xE8, 0x86, 0xBF, 0xBB, 0x35, 0xCE, 0xB2, + 0x46, 0xCB, 0x02, 0x00, 0x5B, 0xB4, 0xE2, 0xC6, 0x8F, 0x2F, 0x98, 0xAF, 0x87, 0x4B, 0x48, 0x45, + 0xED, 0xCC, 0x1D, 0xE6, 0x58, 0xD6, 0xF2, 0x50, 0x25, 0x9F, 0x52, 0xC7, 0xCB, 0x8A, 0x17, 0x9D, + 0x5B, 0xE5, 0xC8, 0xD7, 0x72, 0xB7, 0x52, 0xB2, 0xC4, 0x98, 0xE3, 0x7A, 0x17, 0x3E, 0xC6, 0x60, + 0xA7, 0x97, 0xB0, 0xCF, 0x18, 0x81, 0x53, 0x84, 0x4C, 0xD5, 0x17, 0x32, 0x03, 0x13, 0x39, 0x51, + 0x09, 0x10, 0xE3, 0x77, 0x49, 0x4F, 0x62, 0x01, 0xBF, 0x8C, 0x9A, 0xE0, 0x41, 0x9E, 0x89, 0x74, + 0x36, 0xF9, 0x96, 0x86, 0x2E, 0x96, 0x1C, 0x4A, 0xB7, 0x2B, 0x4A, 0x97, 0xBC, 0x99, 0x40, 0xA3, + 0xE0, 0x3D, 0xC8, 0xAD, 0x2F, 0xDF, 0x4F, 0x2C, 0xC4, 0x69, 0x82, 0x9F, 0x9B, 0x81, 0x0C, 0x61, + 0x5C, 0xA5, 0x9D, 0x8C, 0x89, 0xC0, 0x2C, 0xB4, 0x4A, 0x33, 0x4E, 0xEB, 0xA2, 0x56, 0x40, 0xC0, + 0xC2, 0x46, 0xAF, 0x6A, 0xFC, 0x67, 0xD1, 0x80, 0x5E, 0xC5, 0x6D, 0x84, 0x43, 0x27, 0x3F, 0x55, + 0x15, 0x96, 0x6A, 0xA0, 0xA5, 0xDA, 0xB7, 0xFF, 0xB7, 0x75, 0x6E, 0x4C, 0x49, 0x91, 0x9D, 0x22, + 0xA3, 0x46, 0xEA, 0xED, 0x9A, 0x00, 0xE2, 0x32, 0xC3, 0xD6, 0xA9, 0x71, 0x20, 0x55, 0xA3, 0x19, + 0xED, 0xF8, 0x4F, 0xA7, 0x12, 0x9C, 0x66, 0x87, 0xAF, 0x4E, 0xB7, 0xF0, 0xDB, 0xBF, 0xEF, 0xF0, + 0xF6, 0xAF, 0xEA, 0xDA, 0x09, 0xFE, 0xDE, 0x38, 0x5C, 0xA5, 0xA2, 0xDF, 0x99, 0x45, 0xA8, 0xE4, + 0xE7, 0x92, 0xAC, 0x67, 0xAA, 0x4F, 0xBF, 0x77, 0x3E, 0xA2, 0x40, 0x49, 0x22, 0x4A, 0x1E, 0x3B, + 0xAA, 0x70, 0x7F, 0x95, 0xAF, 0x37, 0x4B, 0xFC, 0x99, 0xE2, 0xE0, 0xBA, 0xD7, 0x34, 0xCE, 0x55, + 0x88, 0x5B, 0x84, 0x1B, 0x57, 0xC4, 0x80, 0x03, 0x53, 0xC9, 0x2F, 0x93, 0x04, 0x4D, 0xD5, 0x96, + 0xE5, 0x70, 0xA6, 0x6E, 0x63, 0x5D, 0x9D, 0x6C, 0xDB, 0x02, 0x0A, 0xA9, 0xDA, 0x8B, 0x53, 0xDC, + 0xD9, 0x9A, 0xC5, 0x94, 0x2C, 0x91, 0x92, 0x2A, 0xDE, 0xBB, 0x8B, 0x13, 0xB9, 0x19, 0x96, 0x64, + 0xCC, 0xF2, 0x64, 0x39, 0xB7, 0x75, 0x49, 0xE9, 0x86, 0xC2, 0x86, 0x62, 0xD9, 0x24, 0xD3, 0x81, + 0x35, 0x49, 0xFC, 0xA0, 0xA5, 0xA0, 0x93, 0x05, 0x64, 0xB4, 0x1A, 0x57, 0xCE, 0x0C, 0x90, 0x02, + 0x27, 0xC5, 0x7A, 0x2B, 0x5D, 0xAE, 0x3E, 0xD5, 0xDD, 0x10, 0x7C, 0x14, 0xEA, 0x3A, 0x08, 0xAC, + 0x72, 0x4E, 0x90, 0x3D, 0x3B, 0x7C, 0x86, 0x2E, 0xEB, 0xD4, 0x06, 0x70, 0xE6, 0xC7, 0xFB, 0x5F, + 0xBD, 0x18, 0xF4, 0x11, 0xA4, 0x1A, 0x93, 0xC3, 0xBE, 0xD9, 0xFB, 0x26, 0x48, 0x2F, 0x37, 0x3C, + 0xD0, 0x03, 0x47, 0x1A, 0xF7, 0x62, 0x19, 0x24, 0x5C, 0xF4, 0xA8, 0x92, 0x20, 0x7A, 0xF2, 0x9E, + 0x2A, 0xC5, 0x95, 0xA2, 0xFB, 0xA4, 0xEA, 0x85, 0xD8, 0x56, 0xB7, 0x70, 0xD1, 0x60, 0x30, 0xA5, + 0x30, 0x82, 0x70, 0xDC, 0x7A, 0x65, 0x8A, 0x36, 0x3F, 0x5B, 0x0C, 0xAE, 0x54, 0x7C, 0xD3, 0x57, + 0x84, 0x7B, 0x3A, 0x65, 0x18, 0x81, 0xEE, 0x05, 0x9B, 0x44, 0x4D, 0xB8, 0xDA, 0xA2, 0xA1, 0xC9, + 0x15, 0xD3, 0x73, 0x03, 0x0E, 0x43, 0xE9, 0x8E, 0x15, 0xF9, 0xBE, 0xC6, 0xC5, 0x8A, 0xE5, 0xC0, + 0x1E, 0xC2, 0x37, 0x9E, 0x2A, 0x26, 0xA5, 0xA0, 0xBD, 0x24, 0x5F, 0xB9, 0xC1, 0xAB, 0x34, 0x48, + 0xB9, 0x5D, 0x98, 0xB4, 0x65, 0x18, 0xF3, 0x63, 0x19, 0x44, 0x1B, 0x11, 0x16, 0xFF, 0xDC, 0xF1, + 0x79, 0x08, 0x86, 0x0F, 0x52, 0x98, 0x73, 0xC4, 0x92, 0x90, 0x2B, 0x47, 0x09, 0xD0, 0x43, 0x6C, + 0x2F, 0x20, 0xEB, 0xDC, 0xDA, 0xC5, 0x08, 0x7B, 0x94, 0x42, 0x30, 0x6A, 0xC7, 0xDA, 0x8C, 0xC3, + 0x76, 0xA7, 0xA5, 0xCC, 0x62, 0x13, 0x00, 0x60, 0x31, 0x58, 0x44, 0x9B, 0xF5, 0x64, 0x14, 0xF5, + 0x11, 0xC5, 0x54, 0x52, 0x83, 0xD4, 0x73, 0x01, 0x16, 0x0E, 0xB3, 0x7A, 0x29, 0x69, 0x35, 0x56, + 0xD4, 0xEE, 0x8A, 0x17, 0xA2, 0x99, 0x24, 0x9C, 0xD7, 0x8F, 0xDB, 0x55, 0xB5, 0x3E }; diff --git a/drivers/sensors/pmw3360.c b/drivers/sensors/pmw3360.c index 17c4675ffa..5463bfc594 100644 --- a/drivers/sensors/pmw3360.c +++ b/drivers/sensors/pmw3360.c @@ -196,7 +196,7 @@ void pmw_upload_firmware(void) { wait_us(15); unsigned char c; - for (int i = 0; i < firmware_length; i++) { + for (int i = 0; i < FIRMWARE_LENGTH; i++) { c = (unsigned char)pgm_read_byte(firmware_data + i); spi_write(c); wait_us(15); diff --git a/drivers/sensors/pmw3360_firmware.h b/drivers/sensors/pmw3360_firmware.h index cca5a6a4d8..4d5fe7a0b9 100644 --- a/drivers/sensors/pmw3360_firmware.h +++ b/drivers/sensors/pmw3360_firmware.h @@ -18,283 +18,266 @@ #pragma once -// clang-format off -// Firmware Blob foor PMW3360 -const uint16_t firmware_length = 4094; -// clang-format off -const uint8_t firmware_data[] PROGMEM = { // SROM 0x04 -0x01, 0x04, 0x8e, 0x96, 0x6e, 0x77, 0x3e, 0xfe, 0x7e, 0x5f, 0x1d, 0xb8, 0xf2, 0x66, 0x4e, -0xff, 0x5d, 0x19, 0xb0, 0xc2, 0x04, 0x69, 0x54, 0x2a, 0xd6, 0x2e, 0xbf, 0xdd, 0x19, 0xb0, -0xc3, 0xe5, 0x29, 0xb1, 0xe0, 0x23, 0xa5, 0xa9, 0xb1, 0xc1, 0x00, 0x82, 0x67, 0x4c, 0x1a, -0x97, 0x8d, 0x79, 0x51, 0x20, 0xc7, 0x06, 0x8e, 0x7c, 0x7c, 0x7a, 0x76, 0x4f, 0xfd, 0x59, -0x30, 0xe2, 0x46, 0x0e, 0x9e, 0xbe, 0xdf, 0x1d, 0x99, 0x91, 0xa0, 0xa5, 0xa1, 0xa9, 0xd0, -0x22, 0xc6, 0xef, 0x5c, 0x1b, 0x95, 0x89, 0x90, 0xa2, 0xa7, 0xcc, 0xfb, 0x55, 0x28, 0xb3, -0xe4, 0x4a, 0xf7, 0x6c, 0x3b, 0xf4, 0x6a, 0x56, 0x2e, 0xde, 0x1f, 0x9d, 0xb8, 0xd3, 0x05, -0x88, 0x92, 0xa6, 0xce, 0x1e, 0xbe, 0xdf, 0x1d, 0x99, 0xb0, 0xe2, 0x46, 0xef, 0x5c, 0x07, -0x11, 0x5d, 0x98, 0x0b, 0x9d, 0x94, 0x97, 0xee, 0x4e, 0x45, 0x33, 0x6b, 0x44, 0xc7, 0x29, -0x56, 0x27, 0x30, 0xc6, 0xa7, 0xd5, 0xf2, 0x56, 0xdf, 0xb4, 0x38, 0x62, 0xcb, 0xa0, 0xb6, -0xe3, 0x0f, 0x84, 0x06, 0x24, 0x05, 0x65, 0x6f, 0x76, 0x89, 0xb5, 0x77, 0x41, 0x27, 0x82, -0x66, 0x65, 0x82, 0xcc, 0xd5, 0xe6, 0x20, 0xd5, 0x27, 0x17, 0xc5, 0xf8, 0x03, 0x23, 0x7c, -0x5f, 0x64, 0xa5, 0x1d, 0xc1, 0xd6, 0x36, 0xcb, 0x4c, 0xd4, 0xdb, 0x66, 0xd7, 0x8b, 0xb1, -0x99, 0x7e, 0x6f, 0x4c, 0x36, 0x40, 0x06, 0xd6, 0xeb, 0xd7, 0xa2, 0xe4, 0xf4, 0x95, 0x51, -0x5a, 0x54, 0x96, 0xd5, 0x53, 0x44, 0xd7, 0x8c, 0xe0, 0xb9, 0x40, 0x68, 0xd2, 0x18, 0xe9, -0xdd, 0x9a, 0x23, 0x92, 0x48, 0xee, 0x7f, 0x43, 0xaf, 0xea, 0x77, 0x38, 0x84, 0x8c, 0x0a, -0x72, 0xaf, 0x69, 0xf8, 0xdd, 0xf1, 0x24, 0x83, 0xa3, 0xf8, 0x4a, 0xbf, 0xf5, 0x94, 0x13, -0xdb, 0xbb, 0xd8, 0xb4, 0xb3, 0xa0, 0xfb, 0x45, 0x50, 0x60, 0x30, 0x59, 0x12, 0x31, 0x71, -0xa2, 0xd3, 0x13, 0xe7, 0xfa, 0xe7, 0xce, 0x0f, 0x63, 0x15, 0x0b, 0x6b, 0x94, 0xbb, 0x37, -0x83, 0x26, 0x05, 0x9d, 0xfb, 0x46, 0x92, 0xfc, 0x0a, 0x15, 0xd1, 0x0d, 0x73, 0x92, 0xd6, -0x8c, 0x1b, 0x8c, 0xb8, 0x55, 0x8a, 0xce, 0xbd, 0xfe, 0x8e, 0xfc, 0xed, 0x09, 0x12, 0x83, -0x91, 0x82, 0x51, 0x31, 0x23, 0xfb, 0xb4, 0x0c, 0x76, 0xad, 0x7c, 0xd9, 0xb4, 0x4b, 0xb2, -0x67, 0x14, 0x09, 0x9c, 0x7f, 0x0c, 0x18, 0xba, 0x3b, 0xd6, 0x8e, 0x14, 0x2a, 0xe4, 0x1b, -0x52, 0x9f, 0x2b, 0x7d, 0xe1, 0xfb, 0x6a, 0x33, 0x02, 0xfa, 0xac, 0x5a, 0xf2, 0x3e, 0x88, -0x7e, 0xae, 0xd1, 0xf3, 0x78, 0xe8, 0x05, 0xd1, 0xe3, 0xdc, 0x21, 0xf6, 0xe1, 0x9a, 0xbd, -0x17, 0x0e, 0xd9, 0x46, 0x9b, 0x88, 0x03, 0xea, 0xf6, 0x66, 0xbe, 0x0e, 0x1b, 0x50, 0x49, -0x96, 0x40, 0x97, 0xf1, 0xf1, 0xe4, 0x80, 0xa6, 0x6e, 0xe8, 0x77, 0x34, 0xbf, 0x29, 0x40, -0x44, 0xc2, 0xff, 0x4e, 0x98, 0xd3, 0x9c, 0xa3, 0x32, 0x2b, 0x76, 0x51, 0x04, 0x09, 0xe7, -0xa9, 0xd1, 0xa6, 0x32, 0xb1, 0x23, 0x53, 0xe2, 0x47, 0xab, 0xd6, 0xf5, 0x69, 0x5c, 0x3e, -0x5f, 0xfa, 0xae, 0x45, 0x20, 0xe5, 0xd2, 0x44, 0xff, 0x39, 0x32, 0x6d, 0xfd, 0x27, 0x57, -0x5c, 0xfd, 0xf0, 0xde, 0xc1, 0xb5, 0x99, 0xe5, 0xf5, 0x1c, 0x77, 0x01, 0x75, 0xc5, 0x6d, -0x58, 0x92, 0xf2, 0xb2, 0x47, 0x00, 0x01, 0x26, 0x96, 0x7a, 0x30, 0xff, 0xb7, 0xf0, 0xef, -0x77, 0xc1, 0x8a, 0x5d, 0xdc, 0xc0, 0xd1, 0x29, 0x30, 0x1e, 0x77, 0x38, 0x7a, 0x94, 0xf1, -0xb8, 0x7a, 0x7e, 0xef, 0xa4, 0xd1, 0xac, 0x31, 0x4a, 0xf2, 0x5d, 0x64, 0x3d, 0xb2, 0xe2, -0xf0, 0x08, 0x99, 0xfc, 0x70, 0xee, 0x24, 0xa7, 0x7e, 0xee, 0x1e, 0x20, 0x69, 0x7d, 0x44, -0xbf, 0x87, 0x42, 0xdf, 0x88, 0x3b, 0x0c, 0xda, 0x42, 0xc9, 0x04, 0xf9, 0x45, 0x50, 0xfc, -0x83, 0x8f, 0x11, 0x6a, 0x72, 0xbc, 0x99, 0x95, 0xf0, 0xac, 0x3d, 0xa7, 0x3b, 0xcd, 0x1c, -0xe2, 0x88, 0x79, 0x37, 0x11, 0x5f, 0x39, 0x89, 0x95, 0x0a, 0x16, 0x84, 0x7a, 0xf6, 0x8a, -0xa4, 0x28, 0xe4, 0xed, 0x83, 0x80, 0x3b, 0xb1, 0x23, 0xa5, 0x03, 0x10, 0xf4, 0x66, 0xea, -0xbb, 0x0c, 0x0f, 0xc5, 0xec, 0x6c, 0x69, 0xc5, 0xd3, 0x24, 0xab, 0xd4, 0x2a, 0xb7, 0x99, -0x88, 0x76, 0x08, 0xa0, 0xa8, 0x95, 0x7c, 0xd8, 0x38, 0x6d, 0xcd, 0x59, 0x02, 0x51, 0x4b, -0xf1, 0xb5, 0x2b, 0x50, 0xe3, 0xb6, 0xbd, 0xd0, 0x72, 0xcf, 0x9e, 0xfd, 0x6e, 0xbb, 0x44, -0xc8, 0x24, 0x8a, 0x77, 0x18, 0x8a, 0x13, 0x06, 0xef, 0x97, 0x7d, 0xfa, 0x81, 0xf0, 0x31, -0xe6, 0xfa, 0x77, 0xed, 0x31, 0x06, 0x31, 0x5b, 0x54, 0x8a, 0x9f, 0x30, 0x68, 0xdb, 0xe2, -0x40, 0xf8, 0x4e, 0x73, 0xfa, 0xab, 0x74, 0x8b, 0x10, 0x58, 0x13, 0xdc, 0xd2, 0xe6, 0x78, -0xd1, 0x32, 0x2e, 0x8a, 0x9f, 0x2c, 0x58, 0x06, 0x48, 0x27, 0xc5, 0xa9, 0x5e, 0x81, 0x47, -0x89, 0x46, 0x21, 0x91, 0x03, 0x70, 0xa4, 0x3e, 0x88, 0x9c, 0xda, 0x33, 0x0a, 0xce, 0xbc, -0x8b, 0x8e, 0xcf, 0x9f, 0xd3, 0x71, 0x80, 0x43, 0xcf, 0x6b, 0xa9, 0x51, 0x83, 0x76, 0x30, -0x82, 0xc5, 0x6a, 0x85, 0x39, 0x11, 0x50, 0x1a, 0x82, 0xdc, 0x1e, 0x1c, 0xd5, 0x7d, 0xa9, -0x71, 0x99, 0x33, 0x47, 0x19, 0x97, 0xb3, 0x5a, 0xb1, 0xdf, 0xed, 0xa4, 0xf2, 0xe6, 0x26, -0x84, 0xa2, 0x28, 0x9a, 0x9e, 0xdf, 0xa6, 0x6a, 0xf4, 0xd6, 0xfc, 0x2e, 0x5b, 0x9d, 0x1a, -0x2a, 0x27, 0x68, 0xfb, 0xc1, 0x83, 0x21, 0x4b, 0x90, 0xe0, 0x36, 0xdd, 0x5b, 0x31, 0x42, -0x55, 0xa0, 0x13, 0xf7, 0xd0, 0x89, 0x53, 0x71, 0x99, 0x57, 0x09, 0x29, 0xc5, 0xf3, 0x21, -0xf8, 0x37, 0x2f, 0x40, 0xf3, 0xd4, 0xaf, 0x16, 0x08, 0x36, 0x02, 0xfc, 0x77, 0xc5, 0x8b, -0x04, 0x90, 0x56, 0xb9, 0xc9, 0x67, 0x9a, 0x99, 0xe8, 0x00, 0xd3, 0x86, 0xff, 0x97, 0x2d, -0x08, 0xe9, 0xb7, 0xb3, 0x91, 0xbc, 0xdf, 0x45, 0xc6, 0xed, 0x0f, 0x8c, 0x4c, 0x1e, 0xe6, -0x5b, 0x6e, 0x38, 0x30, 0xe4, 0xaa, 0xe3, 0x95, 0xde, 0xb9, 0xe4, 0x9a, 0xf5, 0xb2, 0x55, -0x9a, 0x87, 0x9b, 0xf6, 0x6a, 0xb2, 0xf2, 0x77, 0x9a, 0x31, 0xf4, 0x7a, 0x31, 0xd1, 0x1d, -0x04, 0xc0, 0x7c, 0x32, 0xa2, 0x9e, 0x9a, 0xf5, 0x62, 0xf8, 0x27, 0x8d, 0xbf, 0x51, 0xff, -0xd3, 0xdf, 0x64, 0x37, 0x3f, 0x2a, 0x6f, 0x76, 0x3a, 0x7d, 0x77, 0x06, 0x9e, 0x77, 0x7f, -0x5e, 0xeb, 0x32, 0x51, 0xf9, 0x16, 0x66, 0x9a, 0x09, 0xf3, 0xb0, 0x08, 0xa4, 0x70, 0x96, -0x46, 0x30, 0xff, 0xda, 0x4f, 0xe9, 0x1b, 0xed, 0x8d, 0xf8, 0x74, 0x1f, 0x31, 0x92, 0xb3, -0x73, 0x17, 0x36, 0xdb, 0x91, 0x30, 0xd6, 0x88, 0x55, 0x6b, 0x34, 0x77, 0x87, 0x7a, 0xe7, -0xee, 0x06, 0xc6, 0x1c, 0x8c, 0x19, 0x0c, 0x48, 0x46, 0x23, 0x5e, 0x9c, 0x07, 0x5c, 0xbf, -0xb4, 0x7e, 0xd6, 0x4f, 0x74, 0x9c, 0xe2, 0xc5, 0x50, 0x8b, 0xc5, 0x8b, 0x15, 0x90, 0x60, -0x62, 0x57, 0x29, 0xd0, 0x13, 0x43, 0xa1, 0x80, 0x88, 0x91, 0x00, 0x44, 0xc7, 0x4d, 0x19, -0x86, 0xcc, 0x2f, 0x2a, 0x75, 0x5a, 0xfc, 0xeb, 0x97, 0x2a, 0x70, 0xe3, 0x78, 0xd8, 0x91, -0xb0, 0x4f, 0x99, 0x07, 0xa3, 0x95, 0xea, 0x24, 0x21, 0xd5, 0xde, 0x51, 0x20, 0x93, 0x27, -0x0a, 0x30, 0x73, 0xa8, 0xff, 0x8a, 0x97, 0xe9, 0xa7, 0x6a, 0x8e, 0x0d, 0xe8, 0xf0, 0xdf, -0xec, 0xea, 0xb4, 0x6c, 0x1d, 0x39, 0x2a, 0x62, 0x2d, 0x3d, 0x5a, 0x8b, 0x65, 0xf8, 0x90, -0x05, 0x2e, 0x7e, 0x91, 0x2c, 0x78, 0xef, 0x8e, 0x7a, 0xc1, 0x2f, 0xac, 0x78, 0xee, 0xaf, -0x28, 0x45, 0x06, 0x4c, 0x26, 0xaf, 0x3b, 0xa2, 0xdb, 0xa3, 0x93, 0x06, 0xb5, 0x3c, 0xa5, -0xd8, 0xee, 0x8f, 0xaf, 0x25, 0xcc, 0x3f, 0x85, 0x68, 0x48, 0xa9, 0x62, 0xcc, 0x97, 0x8f, -0x7f, 0x2a, 0xea, 0xe0, 0x15, 0x0a, 0xad, 0x62, 0x07, 0xbd, 0x45, 0xf8, 0x41, 0xd8, 0x36, -0xcb, 0x4c, 0xdb, 0x6e, 0xe6, 0x3a, 0xe7, 0xda, 0x15, 0xe9, 0x29, 0x1e, 0x12, 0x10, 0xa0, -0x14, 0x2c, 0x0e, 0x3d, 0xf4, 0xbf, 0x39, 0x41, 0x92, 0x75, 0x0b, 0x25, 0x7b, 0xa3, 0xce, -0x39, 0x9c, 0x15, 0x64, 0xc8, 0xfa, 0x3d, 0xef, 0x73, 0x27, 0xfe, 0x26, 0x2e, 0xce, 0xda, -0x6e, 0xfd, 0x71, 0x8e, 0xdd, 0xfe, 0x76, 0xee, 0xdc, 0x12, 0x5c, 0x02, 0xc5, 0x3a, 0x4e, -0x4e, 0x4f, 0xbf, 0xca, 0x40, 0x15, 0xc7, 0x6e, 0x8d, 0x41, 0xf1, 0x10, 0xe0, 0x4f, 0x7e, -0x97, 0x7f, 0x1c, 0xae, 0x47, 0x8e, 0x6b, 0xb1, 0x25, 0x31, 0xb0, 0x73, 0xc7, 0x1b, 0x97, -0x79, 0xf9, 0x80, 0xd3, 0x66, 0x22, 0x30, 0x07, 0x74, 0x1e, 0xe4, 0xd0, 0x80, 0x21, 0xd6, -0xee, 0x6b, 0x6c, 0x4f, 0xbf, 0xf5, 0xb7, 0xd9, 0x09, 0x87, 0x2f, 0xa9, 0x14, 0xbe, 0x27, -0xd9, 0x72, 0x50, 0x01, 0xd4, 0x13, 0x73, 0xa6, 0xa7, 0x51, 0x02, 0x75, 0x25, 0xe1, 0xb3, -0x45, 0x34, 0x7d, 0xa8, 0x8e, 0xeb, 0xf3, 0x16, 0x49, 0xcb, 0x4f, 0x8c, 0xa1, 0xb9, 0x36, -0x85, 0x39, 0x75, 0x5d, 0x08, 0x00, 0xae, 0xeb, 0xf6, 0xea, 0xd7, 0x13, 0x3a, 0x21, 0x5a, -0x5f, 0x30, 0x84, 0x52, 0x26, 0x95, 0xc9, 0x14, 0xf2, 0x57, 0x55, 0x6b, 0xb1, 0x10, 0xc2, -0xe1, 0xbd, 0x3b, 0x51, 0xc0, 0xb7, 0x55, 0x4c, 0x71, 0x12, 0x26, 0xc7, 0x0d, 0xf9, 0x51, -0xa4, 0x38, 0x02, 0x05, 0x7f, 0xb8, 0xf1, 0x72, 0x4b, 0xbf, 0x71, 0x89, 0x14, 0xf3, 0x77, -0x38, 0xd9, 0x71, 0x24, 0xf3, 0x00, 0x11, 0xa1, 0xd8, 0xd4, 0x69, 0x27, 0x08, 0x37, 0x35, -0xc9, 0x11, 0x9d, 0x90, 0x1c, 0x0e, 0xe7, 0x1c, 0xff, 0x2d, 0x1e, 0xe8, 0x92, 0xe1, 0x18, -0x10, 0x95, 0x7c, 0xe0, 0x80, 0xf4, 0x96, 0x43, 0x21, 0xf9, 0x75, 0x21, 0x64, 0x38, 0xdd, -0x9f, 0x1e, 0x95, 0x16, 0xda, 0x56, 0x1d, 0x4f, 0x9a, 0x53, 0xb2, 0xe2, 0xe4, 0x18, 0xcb, -0x6b, 0x1a, 0x65, 0xeb, 0x56, 0xc6, 0x3b, 0xe5, 0xfe, 0xd8, 0x26, 0x3f, 0x3a, 0x84, 0x59, -0x72, 0x66, 0xa2, 0xf3, 0x75, 0xff, 0xfb, 0x60, 0xb3, 0x22, 0xad, 0x3f, 0x2d, 0x6b, 0xf9, -0xeb, 0xea, 0x05, 0x7c, 0xd8, 0x8f, 0x6d, 0x2c, 0x98, 0x9e, 0x2b, 0x93, 0xf1, 0x5e, 0x46, -0xf0, 0x87, 0x49, 0x29, 0x73, 0x68, 0xd7, 0x7f, 0xf9, 0xf0, 0xe5, 0x7d, 0xdb, 0x1d, 0x75, -0x19, 0xf3, 0xc4, 0x58, 0x9b, 0x17, 0x88, 0xa8, 0x92, 0xe0, 0xbe, 0xbd, 0x8b, 0x1d, 0x8d, -0x9f, 0x56, 0x76, 0xad, 0xaf, 0x29, 0xe2, 0xd9, 0xd5, 0x52, 0xf6, 0xb5, 0x56, 0x35, 0x57, -0x3a, 0xc8, 0xe1, 0x56, 0x43, 0x19, 0x94, 0xd3, 0x04, 0x9b, 0x6d, 0x35, 0xd8, 0x0b, 0x5f, -0x4d, 0x19, 0x8e, 0xec, 0xfa, 0x64, 0x91, 0x0a, 0x72, 0x20, 0x2b, 0xbc, 0x1a, 0x4a, 0xfe, -0x8b, 0xfd, 0xbb, 0xed, 0x1b, 0x23, 0xea, 0xad, 0x72, 0x82, 0xa1, 0x29, 0x99, 0x71, 0xbd, -0xf0, 0x95, 0xc1, 0x03, 0xdd, 0x7b, 0xc2, 0xb2, 0x3c, 0x28, 0x54, 0xd3, 0x68, 0xa4, 0x72, -0xc8, 0x66, 0x96, 0xe0, 0xd1, 0xd8, 0x7f, 0xf8, 0xd1, 0x26, 0x2b, 0xf7, 0xad, 0xba, 0x55, -0xca, 0x15, 0xb9, 0x32, 0xc3, 0xe5, 0x88, 0x97, 0x8e, 0x5c, 0xfb, 0x92, 0x25, 0x8b, 0xbf, -0xa2, 0x45, 0x55, 0x7a, 0xa7, 0x6f, 0x8b, 0x57, 0x5b, 0xcf, 0x0e, 0xcb, 0x1d, 0xfb, 0x20, -0x82, 0x77, 0xa8, 0x8c, 0xcc, 0x16, 0xce, 0x1d, 0xfa, 0xde, 0xcc, 0x0b, 0x62, 0xfe, 0xcc, -0xe1, 0xb7, 0xf0, 0xc3, 0x81, 0x64, 0x73, 0x40, 0xa0, 0xc2, 0x4d, 0x89, 0x11, 0x75, 0x33, -0x55, 0x33, 0x8d, 0xe8, 0x4a, 0xfd, 0xea, 0x6e, 0x30, 0x0b, 0xd7, 0x31, 0x2c, 0xde, 0x47, -0xe3, 0xbf, 0xf8, 0x55, 0x42, 0xe2, 0x7f, 0x59, 0xe5, 0x17, 0xef, 0x99, 0x34, 0x69, 0x91, -0xb1, 0x23, 0x8e, 0x20, 0x87, 0x2d, 0xa8, 0xfe, 0xd5, 0x8a, 0xf3, 0x84, 0x3a, 0xf0, 0x37, -0xe4, 0x09, 0x00, 0x54, 0xee, 0x67, 0x49, 0x93, 0xe4, 0x81, 0x70, 0xe3, 0x90, 0x4d, 0xef, -0xfe, 0x41, 0xb7, 0x99, 0x7b, 0xc1, 0x83, 0xba, 0x62, 0x12, 0x6f, 0x7d, 0xde, 0x6b, 0xaf, -0xda, 0x16, 0xf9, 0x55, 0x51, 0xee, 0xa6, 0x0c, 0x2b, 0x02, 0xa3, 0xfd, 0x8d, 0xfb, 0x30, -0x17, 0xe4, 0x6f, 0xdf, 0x36, 0x71, 0xc4, 0xca, 0x87, 0x25, 0x48, 0xb0, 0x47, 0xec, 0xea, -0xb4, 0xbf, 0xa5, 0x4d, 0x9b, 0x9f, 0x02, 0x93, 0xc4, 0xe3, 0xe4, 0xe8, 0x42, 0x2d, 0x68, -0x81, 0x15, 0x0a, 0xeb, 0x84, 0x5b, 0xd6, 0xa8, 0x74, 0xfb, 0x7d, 0x1d, 0xcb, 0x2c, 0xda, -0x46, 0x2a, 0x76, 0x62, 0xce, 0xbc, 0x5c, 0x9e, 0x8b, 0xe7, 0xcf, 0xbe, 0x78, 0xf5, 0x7c, -0xeb, 0xb3, 0x3a, 0x9c, 0xaa, 0x6f, 0xcc, 0x72, 0xd1, 0x59, 0xf2, 0x11, 0x23, 0xd6, 0x3f, -0x48, 0xd1, 0xb7, 0xce, 0xb0, 0xbf, 0xcb, 0xea, 0x80, 0xde, 0x57, 0xd4, 0x5e, 0x97, 0x2f, -0x75, 0xd1, 0x50, 0x8e, 0x80, 0x2c, 0x66, 0x79, 0xbf, 0x72, 0x4b, 0xbd, 0x8a, 0x81, 0x6c, -0xd3, 0xe1, 0x01, 0xdc, 0xd2, 0x15, 0x26, 0xc5, 0x36, 0xda, 0x2c, 0x1a, 0xc0, 0x27, 0x94, -0xed, 0xb7, 0x9b, 0x85, 0x0b, 0x5e, 0x80, 0x97, 0xc5, 0xec, 0x4f, 0xec, 0x88, 0x5d, 0x50, -0x07, 0x35, 0x47, 0xdc, 0x0b, 0x3b, 0x3d, 0xdd, 0x60, 0xaf, 0xa8, 0x5d, 0x81, 0x38, 0x24, -0x25, 0x5d, 0x5c, 0x15, 0xd1, 0xde, 0xb3, 0xab, 0xec, 0x05, 0x69, 0xef, 0x83, 0xed, 0x57, -0x54, 0xb8, 0x64, 0x64, 0x11, 0x16, 0x32, 0x69, 0xda, 0x9f, 0x2d, 0x7f, 0x36, 0xbb, 0x44, -0x5a, 0x34, 0xe8, 0x7f, 0xbf, 0x03, 0xeb, 0x00, 0x7f, 0x59, 0x68, 0x22, 0x79, 0xcf, 0x73, -0x6c, 0x2c, 0x29, 0xa7, 0xa1, 0x5f, 0x38, 0xa1, 0x1d, 0xf0, 0x20, 0x53, 0xe0, 0x1a, 0x63, -0x14, 0x58, 0x71, 0x10, 0xaa, 0x08, 0x0c, 0x3e, 0x16, 0x1a, 0x60, 0x22, 0x82, 0x7f, 0xba, -0xa4, 0x43, 0xa0, 0xd0, 0xac, 0x1b, 0xd5, 0x6b, 0x64, 0xb5, 0x14, 0x93, 0x31, 0x9e, 0x53, -0x50, 0xd0, 0x57, 0x66, 0xee, 0x5a, 0x4f, 0xfb, 0x03, 0x2a, 0x69, 0x58, 0x76, 0xf1, 0x83, -0xf7, 0x4e, 0xba, 0x8c, 0x42, 0x06, 0x60, 0x5d, 0x6d, 0xce, 0x60, 0x88, 0xae, 0xa4, 0xc3, -0xf1, 0x03, 0xa5, 0x4b, 0x98, 0xa1, 0xff, 0x67, 0xe1, 0xac, 0xa2, 0xb8, 0x62, 0xd7, 0x6f, -0xa0, 0x31, 0xb4, 0xd2, 0x77, 0xaf, 0x21, 0x10, 0x06, 0xc6, 0x9a, 0xff, 0x1d, 0x09, 0x17, -0x0e, 0x5f, 0xf1, 0xaa, 0x54, 0x34, 0x4b, 0x45, 0x8a, 0x87, 0x63, 0xa6, 0xdc, 0xf9, 0x24, -0x30, 0x67, 0xc6, 0xb2, 0xd6, 0x61, 0x33, 0x69, 0xee, 0x50, 0x61, 0x57, 0x28, 0xe7, 0x7e, -0xee, 0xec, 0x3a, 0x5a, 0x73, 0x4e, 0xa8, 0x8d, 0xe4, 0x18, 0xea, 0xec, 0x41, 0x64, 0xc8, -0xe2, 0xe8, 0x66, 0xb6, 0x2d, 0xb6, 0xfb, 0x6a, 0x6c, 0x16, 0xb3, 0xdd, 0x46, 0x43, 0xb9, -0x73, 0x00, 0x6a, 0x71, 0xed, 0x4e, 0x9d, 0x25, 0x1a, 0xc3, 0x3c, 0x4a, 0x95, 0x15, 0x99, -0x35, 0x81, 0x14, 0x02, 0xd6, 0x98, 0x9b, 0xec, 0xd8, 0x23, 0x3b, 0x84, 0x29, 0xaf, 0x0c, -0x99, 0x83, 0xa6, 0x9a, 0x34, 0x4f, 0xfa, 0xe8, 0xd0, 0x3c, 0x4b, 0xd0, 0xfb, 0xb6, 0x68, -0xb8, 0x9e, 0x8f, 0xcd, 0xf7, 0x60, 0x2d, 0x7a, 0x22, 0xe5, 0x7d, 0xab, 0x65, 0x1b, 0x95, -0xa7, 0xa8, 0x7f, 0xb6, 0x77, 0x47, 0x7b, 0x5f, 0x8b, 0x12, 0x72, 0xd0, 0xd4, 0x91, 0xef, -0xde, 0x19, 0x50, 0x3c, 0xa7, 0x8b, 0xc4, 0xa9, 0xb3, 0x23, 0xcb, 0x76, 0xe6, 0x81, 0xf0, -0xc1, 0x04, 0x8f, 0xa3, 0xb8, 0x54, 0x5b, 0x97, 0xac, 0x19, 0xff, 0x3f, 0x55, 0x27, 0x2f, -0xe0, 0x1d, 0x42, 0x9b, 0x57, 0xfc, 0x4b, 0x4e, 0x0f, 0xce, 0x98, 0xa9, 0x43, 0x57, 0x03, -0xbd, 0xe7, 0xc8, 0x94, 0xdf, 0x6e, 0x36, 0x73, 0x32, 0xb4, 0xef, 0x2e, 0x85, 0x7a, 0x6e, -0xfc, 0x6c, 0x18, 0x82, 0x75, 0x35, 0x90, 0x07, 0xf3, 0xe4, 0x9f, 0x3e, 0xdc, 0x68, 0xf3, -0xb5, 0xf3, 0x19, 0x80, 0x92, 0x06, 0x99, 0xa2, 0xe8, 0x6f, 0xff, 0x2e, 0x7f, 0xae, 0x42, -0xa4, 0x5f, 0xfb, 0xd4, 0x0e, 0x81, 0x2b, 0xc3, 0x04, 0xff, 0x2b, 0xb3, 0x74, 0x4e, 0x36, -0x5b, 0x9c, 0x15, 0x00, 0xc6, 0x47, 0x2b, 0xe8, 0x8b, 0x3d, 0xf1, 0x9c, 0x03, 0x9a, 0x58, -0x7f, 0x9b, 0x9c, 0xbf, 0x85, 0x49, 0x79, 0x35, 0x2e, 0x56, 0x7b, 0x41, 0x14, 0x39, 0x47, -0x83, 0x26, 0xaa, 0x07, 0x89, 0x98, 0x11, 0x1b, 0x86, 0xe7, 0x73, 0x7a, 0xd8, 0x7d, 0x78, -0x61, 0x53, 0xe9, 0x79, 0xf5, 0x36, 0x8d, 0x44, 0x92, 0x84, 0xf9, 0x13, 0x50, 0x58, 0x3b, -0xa4, 0x6a, 0x36, 0x65, 0x49, 0x8e, 0x3c, 0x0e, 0xf1, 0x6f, 0xd2, 0x84, 0xc4, 0x7e, 0x8e, -0x3f, 0x39, 0xae, 0x7c, 0x84, 0xf1, 0x63, 0x37, 0x8e, 0x3c, 0xcc, 0x3e, 0x44, 0x81, 0x45, -0xf1, 0x4b, 0xb9, 0xed, 0x6b, 0x36, 0x5d, 0xbb, 0x20, 0x60, 0x1a, 0x0f, 0xa3, 0xaa, 0x55, -0x77, 0x3a, 0xa9, 0xae, 0x37, 0x4d, 0xba, 0xb8, 0x86, 0x6b, 0xbc, 0x08, 0x50, 0xf6, 0xcc, -0xa4, 0xbd, 0x1d, 0x40, 0x72, 0xa5, 0x86, 0xfa, 0xe2, 0x10, 0xae, 0x3d, 0x58, 0x4b, 0x97, -0xf3, 0x43, 0x74, 0xa9, 0x9e, 0xeb, 0x21, 0xb7, 0x01, 0xa4, 0x86, 0x93, 0x97, 0xee, 0x2f, -0x4f, 0x3b, 0x86, 0xa1, 0x41, 0x6f, 0x41, 0x26, 0x90, 0x78, 0x5c, 0x7f, 0x30, 0x38, 0x4b, -0x3f, 0xaa, 0xec, 0xed, 0x5c, 0x6f, 0x0e, 0xad, 0x43, 0x87, 0xfd, 0x93, 0x35, 0xe6, 0x01, -0xef, 0x41, 0x26, 0x90, 0x99, 0x9e, 0xfb, 0x19, 0x5b, 0xad, 0xd2, 0x91, 0x8a, 0xe0, 0x46, -0xaf, 0x65, 0xfa, 0x4f, 0x84, 0xc1, 0xa1, 0x2d, 0xcf, 0x45, 0x8b, 0xd3, 0x85, 0x50, 0x55, -0x7c, 0xf9, 0x67, 0x88, 0xd4, 0x4e, 0xe9, 0xd7, 0x6b, 0x61, 0x54, 0xa1, 0xa4, 0xa6, 0xa2, -0xc2, 0xbf, 0x30, 0x9c, 0x40, 0x9f, 0x5f, 0xd7, 0x69, 0x2b, 0x24, 0x82, 0x5e, 0xd9, 0xd6, -0xa7, 0x12, 0x54, 0x1a, 0xf7, 0x55, 0x9f, 0x76, 0x50, 0xa9, 0x95, 0x84, 0xe6, 0x6b, 0x6d, -0xb5, 0x96, 0x54, 0xd6, 0xcd, 0xb3, 0xa1, 0x9b, 0x46, 0xa7, 0x94, 0x4d, 0xc4, 0x94, 0xb4, -0x98, 0xe3, 0xe1, 0xe2, 0x34, 0xd5, 0x33, 0x16, 0x07, 0x54, 0xcd, 0xb7, 0x77, 0x53, 0xdb, -0x4f, 0x4d, 0x46, 0x9d, 0xe9, 0xd4, 0x9c, 0x8a, 0x36, 0xb6, 0xb8, 0x38, 0x26, 0x6c, 0x0e, -0xff, 0x9c, 0x1b, 0x43, 0x8b, 0x80, 0xcc, 0xb9, 0x3d, 0xda, 0xc7, 0xf1, 0x8a, 0xf2, 0x6d, -0xb8, 0xd7, 0x74, 0x2f, 0x7e, 0x1e, 0xb7, 0xd3, 0x4a, 0xb4, 0xac, 0xfc, 0x79, 0x48, 0x6c, -0xbc, 0x96, 0xb6, 0x94, 0x46, 0x57, 0x2d, 0xb0, 0xa3, 0xfc, 0x1e, 0xb9, 0x52, 0x60, 0x85, -0x2d, 0x41, 0xd0, 0x43, 0x01, 0x1e, 0x1c, 0xd5, 0x7d, 0xfc, 0xf3, 0x96, 0x0d, 0xc7, 0xcb, -0x2a, 0x29, 0x9a, 0x93, 0xdd, 0x88, 0x2d, 0x37, 0x5d, 0xaa, 0xfb, 0x49, 0x68, 0xa0, 0x9c, -0x50, 0x86, 0x7f, 0x68, 0x56, 0x57, 0xf9, 0x79, 0x18, 0x39, 0xd4, 0xe0, 0x01, 0x84, 0x33, -0x61, 0xca, 0xa5, 0xd2, 0xd6, 0xe4, 0xc9, 0x8a, 0x4a, 0x23, 0x44, 0x4e, 0xbc, 0xf0, 0xdc, -0x24, 0xa1, 0xa0, 0xc4, 0xe2, 0x07, 0x3c, 0x10, 0xc4, 0xb5, 0x25, 0x4b, 0x65, 0x63, 0xf4, -0x80, 0xe7, 0xcf, 0x61, 0xb1, 0x71, 0x82, 0x21, 0x87, 0x2c, 0xf5, 0x91, 0x00, 0x32, 0x0c, -0xec, 0xa9, 0xb5, 0x9a, 0x74, 0x85, 0xe3, 0x36, 0x8f, 0x76, 0x4f, 0x9c, 0x6d, 0xce, 0xbc, -0xad, 0x0a, 0x4b, 0xed, 0x76, 0x04, 0xcb, 0xc3, 0xb9, 0x33, 0x9e, 0x01, 0x93, 0x96, 0x69, -0x7d, 0xc5, 0xa2, 0x45, 0x79, 0x9b, 0x04, 0x5c, 0x84, 0x09, 0xed, 0x88, 0x43, 0xc7, 0xab, -0x93, 0x14, 0x26, 0xa1, 0x40, 0xb5, 0xce, 0x4e, 0xbf, 0x2a, 0x42, 0x85, 0x3e, 0x2c, 0x3b, -0x54, 0xe8, 0x12, 0x1f, 0x0e, 0x97, 0x59, 0xb2, 0x27, 0x89, 0xfa, 0xf2, 0xdf, 0x8e, 0x68, -0x59, 0xdc, 0x06, 0xbc, 0xb6, 0x85, 0x0d, 0x06, 0x22, 0xec, 0xb1, 0xcb, 0xe5, 0x04, 0xe6, -0x3d, 0xb3, 0xb0, 0x41, 0x73, 0x08, 0x3f, 0x3c, 0x58, 0x86, 0x63, 0xeb, 0x50, 0xee, 0x1d, -0x2c, 0x37, 0x74, 0xa9, 0xd3, 0x18, 0xa3, 0x47, 0x6e, 0x93, 0x54, 0xad, 0x0a, 0x5d, 0xb8, -0x2a, 0x55, 0x5d, 0x78, 0xf6, 0xee, 0xbe, 0x8e, 0x3c, 0x76, 0x69, 0xb9, 0x40, 0xc2, 0x34, -0xec, 0x2a, 0xb9, 0xed, 0x7e, 0x20, 0xe4, 0x8d, 0x00, 0x38, 0xc7, 0xe6, 0x8f, 0x44, 0xa8, -0x86, 0xce, 0xeb, 0x2a, 0xe9, 0x90, 0xf1, 0x4c, 0xdf, 0x32, 0xfb, 0x73, 0x1b, 0x6d, 0x92, -0x1e, 0x95, 0xfe, 0xb4, 0xdb, 0x65, 0xdf, 0x4d, 0x23, 0x54, 0x89, 0x48, 0xbf, 0x4a, 0x2e, -0x70, 0xd6, 0xd7, 0x62, 0xb4, 0x33, 0x29, 0xb1, 0x3a, 0x33, 0x4c, 0x23, 0x6d, 0xa6, 0x76, -0xa5, 0x21, 0x63, 0x48, 0xe6, 0x90, 0x5d, 0xed, 0x90, 0x95, 0x0b, 0x7a, 0x84, 0xbe, 0xb8, -0x0d, 0x5e, 0x63, 0x0c, 0x62, 0x26, 0x4c, 0x14, 0x5a, 0xb3, 0xac, 0x23, 0xa4, 0x74, 0xa7, -0x6f, 0x33, 0x30, 0x05, 0x60, 0x01, 0x42, 0xa0, 0x28, 0xb7, 0xee, 0x19, 0x38, 0xf1, 0x64, -0x80, 0x82, 0x43, 0xe1, 0x41, 0x27, 0x1f, 0x1f, 0x90, 0x54, 0x7a, 0xd5, 0x23, 0x2e, 0xd1, -0x3d, 0xcb, 0x28, 0xba, 0x58, 0x7f, 0xdc, 0x7c, 0x91, 0x24, 0xe9, 0x28, 0x51, 0x83, 0x6e, -0xc5, 0x56, 0x21, 0x42, 0xed, 0xa0, 0x56, 0x22, 0xa1, 0x40, 0x80, 0x6b, 0xa8, 0xf7, 0x94, -0xca, 0x13, 0x6b, 0x0c, 0x39, 0xd9, 0xfd, 0xe9, 0xf3, 0x6f, 0xa6, 0x9e, 0xfc, 0x70, 0x8a, -0xb3, 0xbc, 0x59, 0x3c, 0x1e, 0x1d, 0x6c, 0xf9, 0x7c, 0xaf, 0xf9, 0x88, 0x71, 0x95, 0xeb, -0x57, 0x00, 0xbd, 0x9f, 0x8c, 0x4f, 0xe1, 0x24, 0x83, 0xc5, 0x22, 0xea, 0xfd, 0xd3, 0x0c, -0xe2, 0x17, 0x18, 0x7c, 0x6a, 0x4c, 0xde, 0x77, 0xb4, 0x53, 0x9b, 0x4c, 0x81, 0xcd, 0x23, -0x60, 0xaa, 0x0e, 0x25, 0x73, 0x9c, 0x02, 0x79, 0x32, 0x30, 0xdf, 0x74, 0xdf, 0x75, 0x19, -0xf4, 0xa5, 0x14, 0x5c, 0xf7, 0x7a, 0xa8, 0xa5, 0x91, 0x84, 0x7c, 0x60, 0x03, 0x06, 0x3b, -0xcd, 0x50, 0xb6, 0x27, 0x9c, 0xfe, 0xb1, 0xdd, 0xcc, 0xd3, 0xb0, 0x59, 0x24, 0xb2, 0xca, -0xe2, 0x1c, 0x81, 0x22, 0x9d, 0x07, 0x8f, 0x8e, 0xb9, 0xbe, 0x4e, 0xfa, 0xfc, 0x39, 0x65, -0xba, 0xbf, 0x9d, 0x12, 0x37, 0x5e, 0x97, 0x7e, 0xf3, 0x89, 0xf5, 0x5d, 0xf5, 0xe3, 0x09, -0x8c, 0x62, 0xb5, 0x20, 0x9d, 0x0c, 0x53, 0x8a, 0x68, 0x1b, 0xd2, 0x8f, 0x75, 0x17, 0x5d, -0xd4, 0xe5, 0xda, 0x75, 0x62, 0x19, 0x14, 0x6a, 0x26, 0x2d, 0xeb, 0xf8, 0xaf, 0x37, 0xf0, -0x6c, 0xa4, 0x55, 0xb1, 0xbc, 0xe2, 0x33, 0xc0, 0x9a, 0xca, 0xb0, 0x11, 0x49, 0x4f, 0x68, -0x9b, 0x3b, 0x6b, 0x3c, 0xcc, 0x13, 0xf6, 0xc7, 0x85, 0x61, 0x68, 0x42, 0xae, 0xbb, 0xdd, -0xcd, 0x45, 0x16, 0x29, 0x1d, 0xea, 0xdb, 0xc8, 0x03, 0x94, 0x3c, 0xee, 0x4f, 0x82, 0x11, -0xc3, 0xec, 0x28, 0xbd, 0x97, 0x05, 0x99, 0xde, 0xd7, 0xbb, 0x5e, 0x22, 0x1f, 0xd4, 0xeb, -0x64, 0xd9, 0x92, 0xd9, 0x85, 0xb7, 0x6a, 0x05, 0x6a, 0xe4, 0x24, 0x41, 0xf1, 0xcd, 0xf0, -0xd8, 0x3f, 0xf8, 0x9e, 0x0e, 0xcd, 0x0b, 0x7a, 0x70, 0x6b, 0x5a, 0x75, 0x0a, 0x6a, 0x33, -0x88, 0xec, 0x17, 0x75, 0x08, 0x70, 0x10, 0x2f, 0x24, 0xcf, 0xc4, 0xe9, 0x42, 0x00, 0x61, -0x94, 0xca, 0x1f, 0x3a, 0x76, 0x06, 0xfa, 0xd2, 0x48, 0x81, 0xf0, 0x77, 0x60, 0x03, 0x45, -0xd9, 0x61, 0xf4, 0xa4, 0x6f, 0x3d, 0xd9, 0x30, 0xc3, 0x04, 0x6b, 0x54, 0x2a, 0xb7, 0xec, -0x3b, 0xf4, 0x4b, 0xf5, 0x68, 0x52, 0x26, 0xce, 0xff, 0x5d, 0x19, 0x91, 0xa0, 0xa3, 0xa5, -0xa9, 0xb1, 0xe0, 0x23, 0xc4, 0x0a, 0x77, 0x4d, 0xf9, 0x51, 0x20, 0xa3, 0xa5, 0xa9, 0xb1, -0xc1, 0x00, 0x82, 0x86, 0x8e, 0x7f, 0x5d, 0x19, 0x91, 0xa0, 0xa3, 0xc4, 0xeb, 0x54, 0x0b, -0x75, 0x68, 0x52, 0x07, 0x8c, 0x9a, 0x97, 0x8d, 0x79, 0x70, 0x62, 0x46, 0xef, 0x5c, 0x1b, -0x95, 0x89, 0x71, 0x41, 0xe1, 0x21, 0xa1, 0xa1, 0xa1, 0xc0, 0x02, 0x67, 0x4c, 0x1a, 0xb6, -0xcf, 0xfd, 0x78, 0x53, 0x24, 0xab, 0xb5, 0xc9, 0xf1, 0x60, 0x23, 0xa5, 0xc8, 0x12, 0x87, -0x6d, 0x58, 0x13, 0x85, 0x88, 0x92, 0x87, 0x6d, 0x58, 0x32, 0xc7, 0x0c, 0x9a, 0x97, 0xac, -0xda, 0x36, 0xee, 0x5e, 0x3e, 0xdf, 0x1d, 0xb8, 0xf2, 0x66, 0x2f, 0xbd, 0xf8, 0x72, 0x47, -0xed, 0x58, 0x13, 0x85, 0x88, 0x92, 0x87, 0x8c, 0x7b, 0x55, 0x09, 0x90, 0xa2, 0xc6, 0xef, -0x3d, 0xf8, 0x53, 0x24, 0xab, 0xd4, 0x2a, 0xb7, 0xec, 0x5a, 0x36, 0xee, 0x5e, 0x3e, 0xdf, -0x3c, 0xfa, 0x76, 0x4f, 0xfd, 0x59, 0x30, 0xe2, 0x46, 0xef, 0x3d, 0xf8, 0x53, 0x05, 0x69, -0x31, 0xc1, 0x00, 0x82, 0x86, 0x8e, 0x7f, 0x5d, 0x19, 0xb0, 0xe2, 0x27, 0xcc, 0xfb, 0x74, -0x4b, 0x14, 0x8b, 0x94, 0x8b, 0x75, 0x68, 0x33, 0xc5, 0x08, 0x92, 0x87, 0x8c, 0x9a, 0xb6, -0xcf, 0x1c, 0xba, 0xd7, 0x0d, 0x98, 0xb2, 0xe6, 0x2f, 0xdc, 0x1b, 0x95, 0x89, 0x71, 0x60, -0x23, 0xc4, 0x0a, 0x96, 0x8f, 0x9c, 0xba, 0xf6, 0x6e, 0x3f, 0xfc, 0x5b, 0x15, 0xa8, 0xd2, -0x26, 0xaf, 0xbd, 0xf8, 0x72, 0x66, 0x2f, 0xdc, 0x1b, 0xb4, 0xcb, 0x14, 0x8b, 0x94, 0xaa, -0xb7, 0xcd, 0xf9, 0x51, 0x01, 0x80, 0x82, 0x86, 0x6f, 0x3d, 0xd9, 0x30, 0xe2, 0x27, 0xcc, -0xfb, 0x74, 0x4b, 0x14, 0xaa, 0xb7, 0xcd, 0xf9, 0x70, 0x43, 0x04, 0x6b, 0x35, 0xc9, 0xf1, -0x60, 0x23, 0xa5, 0xc8, 0xf3, 0x45, 0x08, 0x92, 0x87, 0x6d, 0x58, 0x32, 0xe6, 0x2f, 0xbd, -0xf8, 0x72, 0x66, 0x4e, 0x1e, 0xbe, 0xfe, 0x7e, 0x7e, 0x7e, 0x5f, 0x1d, 0x99, 0x91, 0xa0, -0xa3, 0xc4, 0x0a, 0x77, 0x4d, 0x18, 0x93, 0xa4, 0xab, 0xd4, 0x0b, 0x75, 0x49, 0x10, 0xa2, -0xc6, 0xef, 0x3d, 0xf8, 0x53, 0x24, 0xab, 0xb5, 0xe8, 0x33, 0xe4, 0x4a, 0x16, 0xae, 0xde, -0x1f, 0xbc, 0xdb, 0x15, 0xa8, 0xb3, 0xc5, 0x08, 0x73, 0x45, 0xe9, 0x31, 0xc1, 0xe1, 0x21, -0xa1, 0xa1, 0xa1, 0xc0, 0x02, 0x86, 0x6f, 0x5c, 0x3a, 0xd7, 0x0d, 0x98, 0x93, 0xa4, 0xca, -0x16, 0xae, 0xde, 0x1f, 0x9d, 0x99, 0xb0, 0xe2, 0x46, 0xef, 0x3d, 0xf8, 0x72, 0x47, 0x0c, -0x9a, 0xb6, 0xcf, 0xfd, 0x59, 0x11, 0xa0, 0xa3, 0xa5, 0xc8, 0xf3, 0x45, 0x08, 0x92, 0x87, -0x6d, 0x39, 0xf0, 0x43, 0x04, 0x8a, 0x96, 0xae, 0xde, 0x3e, 0xdf, 0x1d, 0x99, 0x91, 0xa0, -0xc2, 0x06, 0x6f, 0x3d, 0xf8, 0x72, 0x47, 0x0c, 0x9a, 0x97, 0x8d, 0x98, 0x93, 0x85, 0x88, -0x73, 0x45, 0xe9, 0x31, 0xe0, 0x23, 0xa5, 0xa9, 0xd0, 0x03, 0x84, 0x8a, 0x96, 0xae, 0xde, -0x1f, 0xbc, 0xdb, 0x15, 0xa8, 0xd2, 0x26, 0xce, 0xff, 0x5d, 0x19, 0x91, 0x81, 0x80, 0x82, -0x67, 0x2d, 0xd8, 0x13, 0xa4, 0xab, 0xd4, 0x0b, 0x94, 0xaa, 0xb7, 0xcd, 0xf9, 0x51, 0x20, -0xa3, 0xa5, 0xc8, 0xf3, 0x45, 0xe9, 0x50, 0x22, 0xc6, 0xef, 0x5c, 0x3a, 0xd7, 0x0d, 0x98, -0x93, 0x85, 0x88, 0x73, 0x64, 0x4a, 0xf7, 0x4d, 0xf9, 0x51, 0x20, 0xa3, 0xc4, 0x0a, 0x96, -0xae, 0xde, 0x3e, 0xfe, 0x7e, 0x7e, 0x7e, 0x5f, 0x3c, 0xfa, 0x76, 0x4f, 0xfd, 0x78, 0x72, -0x66, 0x2f, 0xbd, 0xd9, 0x30, 0xc3, 0xe5, 0x48, 0x12, 0x87, 0x8c, 0x7b, 0x55, 0x28, 0xd2, -0x07, 0x8c, 0x9a, 0x97, 0xac, 0xda, 0x17, 0x8d, 0x79, 0x51, 0x20, 0xa3, 0xc4, 0xeb, 0x54, -0x0b, 0x94, 0x8b, 0x94, 0xaa, 0xd6, 0x2e, 0xbf, 0xfc, 0x5b, 0x15, 0xa8, 0xd2, 0x26, 0xaf, -0xdc, 0x1b, 0xb4, 0xea, 0x37, 0xec, 0x3b, 0xf4, 0x6a, 0x37, 0xcd, 0x18, 0x93, 0x85, 0x69, -0x31, 0xc1, 0xe1, 0x40, 0xe3, 0x25, 0xc8, 0x12, 0x87, 0x8c, 0x9a, 0xb6, 0xcf, 0xfd, 0x59, -0x11, 0xa0, 0xc2, 0x06, 0x8e, 0x7f, 0x5d, 0x38, 0xf2, 0x47, 0x0c, 0x7b, 0x74, 0x6a, 0x37, -0xec, 0x5a, 0x36, 0xee, 0x3f, 0xfc, 0x7a, 0x76, 0x4f, 0x1c, 0x9b, 0x95, 0x89, 0x71, 0x41, -0x00, 0x63, 0x44, 0xeb, 0x54, 0x2a, 0xd6, 0x0f, 0x9c, 0xba, 0xd7, 0x0d, 0x98, 0x93, 0x85, -0x69, 0x31, 0xc1, 0x00, 0x82, 0x86, 0x8e, 0x9e, 0xbe, 0xdf, 0x3c, 0xfa, 0x57, 0x2c, 0xda, -0x36, 0xee, 0x3f, 0xfc, 0x5b, 0x15, 0x89, 0x71, 0x41, 0x00, 0x82, 0x86, 0x8e, 0x7f, 0x5d, -0x38, 0xf2, 0x47, 0xed, 0x58, 0x13, 0xa4, 0xca, 0xf7, 0x4d, 0xf9, 0x51, 0x01, 0x80, 0x63, -0x44, 0xeb, 0x54, 0x2a, 0xd6, 0x2e, 0xbf, 0xdd, 0x19, 0x91, 0xa0, 0xa3, 0xa5, 0xa9, 0xb1, -0xe0, 0x42, 0x06, 0x8e, 0x7f, 0x5d, 0x19, 0x91, 0xa0, 0xa3, 0xc4, 0x0a, 0x96, 0x8f, 0x7d, -0x78, 0x72, 0x47, 0x0c, 0x7b, 0x74, 0x6a, 0x56, 0x2e, 0xde, 0x1f, 0xbc, 0xfa, 0x57, 0x0d, -0x79, 0x51, 0x01, 0x61, 0x21, 0xa1, 0xc0, 0xe3, 0x25, 0xa9, 0xb1, 0xc1, 0xe1, 0x40, 0x02, -0x67, 0x4c, 0x1a, 0x97, 0x8d, 0x98, 0x93, 0xa4, 0xab, 0xd4, 0x2a, 0xd6, 0x0f, 0x9c, 0x9b, -0xb4, 0xcb, 0x14, 0xaa, 0xb7, 0xcd, 0xf9, 0x51, 0x20, 0xa3, 0xc4, 0xeb, 0x35, 0xc9, 0xf1, -0x60, 0x42, 0x06, 0x8e, 0x7f, 0x7c, 0x7a, 0x76, 0x6e, 0x3f, 0xfc, 0x7a, 0x76, 0x6e, 0x5e, -0x3e, 0xfe, 0x7e, 0x5f, 0x3c, 0xdb, 0x15, 0x89, 0x71, 0x41, 0xe1, 0x21, 0xc0, 0xe3, 0x44, -0xeb, 0x54, 0x2a, 0xb7, 0xcd, 0xf9, 0x70, 0x62, 0x27, 0xad, 0xd8, 0x32, 0xc7, 0x0c, 0x7b, -0x74, 0x4b, 0x14, 0xaa, 0xb7, 0xec, 0x3b, 0xd5, 0x28, 0xd2, 0x07, 0x6d, 0x39, 0xd1, 0x20, -0xc2, 0xe7, 0x4c, 0x1a, 0x97, 0x8d, 0x98, 0xb2, 0xc7, 0x0c, 0x59, 0x28, 0xf3, 0x9b }; +#include "progmem.h" + +#define FIRMWARE_LENGTH 4094 // clang-format off +const uint8_t firmware_data[FIRMWARE_LENGTH] PROGMEM = { + 0x01, 0x04, 0x8E, 0x96, 0x6E, 0x77, 0x3E, 0xFE, 0x7E, 0x5F, 0x1D, 0xB8, 0xF2, 0x66, 0x4E, 0xFF, + 0x5D, 0x19, 0xB0, 0xC2, 0x04, 0x69, 0x54, 0x2A, 0xD6, 0x2E, 0xBF, 0xDD, 0x19, 0xB0, 0xC3, 0xE5, + 0x29, 0xB1, 0xE0, 0x23, 0xA5, 0xA9, 0xB1, 0xC1, 0x00, 0x82, 0x67, 0x4C, 0x1A, 0x97, 0x8D, 0x79, + 0x51, 0x20, 0xC7, 0x06, 0x8E, 0x7C, 0x7C, 0x7A, 0x76, 0x4F, 0xFD, 0x59, 0x30, 0xE2, 0x46, 0x0E, + 0x9E, 0xBE, 0xDF, 0x1D, 0x99, 0x91, 0xA0, 0xA5, 0xA1, 0xA9, 0xD0, 0x22, 0xC6, 0xEF, 0x5C, 0x1B, + 0x95, 0x89, 0x90, 0xA2, 0xA7, 0xCC, 0xFB, 0x55, 0x28, 0xB3, 0xE4, 0x4A, 0xF7, 0x6C, 0x3B, 0xF4, + 0x6A, 0x56, 0x2E, 0xDE, 0x1F, 0x9D, 0xB8, 0xD3, 0x05, 0x88, 0x92, 0xA6, 0xCE, 0x1E, 0xBE, 0xDF, + 0x1D, 0x99, 0xB0, 0xE2, 0x46, 0xEF, 0x5C, 0x07, 0x11, 0x5D, 0x98, 0x0B, 0x9D, 0x94, 0x97, 0xEE, + 0x4E, 0x45, 0x33, 0x6B, 0x44, 0xC7, 0x29, 0x56, 0x27, 0x30, 0xC6, 0xA7, 0xD5, 0xF2, 0x56, 0xDF, + 0xB4, 0x38, 0x62, 0xCB, 0xA0, 0xB6, 0xE3, 0x0F, 0x84, 0x06, 0x24, 0x05, 0x65, 0x6F, 0x76, 0x89, + 0xB5, 0x77, 0x41, 0x27, 0x82, 0x66, 0x65, 0x82, 0xCC, 0xD5, 0xE6, 0x20, 0xD5, 0x27, 0x17, 0xC5, + 0xF8, 0x03, 0x23, 0x7C, 0x5F, 0x64, 0xA5, 0x1D, 0xC1, 0xD6, 0x36, 0xCB, 0x4C, 0xD4, 0xDB, 0x66, + 0xD7, 0x8B, 0xB1, 0x99, 0x7E, 0x6F, 0x4C, 0x36, 0x40, 0x06, 0xD6, 0xEB, 0xD7, 0xA2, 0xE4, 0xF4, + 0x95, 0x51, 0x5A, 0x54, 0x96, 0xD5, 0x53, 0x44, 0xD7, 0x8C, 0xE0, 0xB9, 0x40, 0x68, 0xD2, 0x18, + 0xE9, 0xDD, 0x9A, 0x23, 0x92, 0x48, 0xEE, 0x7F, 0x43, 0xAF, 0xEA, 0x77, 0x38, 0x84, 0x8C, 0x0A, + 0x72, 0xAF, 0x69, 0xF8, 0xDD, 0xF1, 0x24, 0x83, 0xA3, 0xF8, 0x4A, 0xBF, 0xF5, 0x94, 0x13, 0xDB, + 0xBB, 0xD8, 0xB4, 0xB3, 0xA0, 0xFB, 0x45, 0x50, 0x60, 0x30, 0x59, 0x12, 0x31, 0x71, 0xA2, 0xD3, + 0x13, 0xE7, 0xFA, 0xE7, 0xCE, 0x0F, 0x63, 0x15, 0x0B, 0x6B, 0x94, 0xBB, 0x37, 0x83, 0x26, 0x05, + 0x9D, 0xFB, 0x46, 0x92, 0xFC, 0x0A, 0x15, 0xD1, 0x0D, 0x73, 0x92, 0xD6, 0x8C, 0x1B, 0x8C, 0xB8, + 0x55, 0x8A, 0xCE, 0xBD, 0xFE, 0x8E, 0xFC, 0xED, 0x09, 0x12, 0x83, 0x91, 0x82, 0x51, 0x31, 0x23, + 0xFB, 0xB4, 0x0C, 0x76, 0xAD, 0x7C, 0xD9, 0xB4, 0x4B, 0xB2, 0x67, 0x14, 0x09, 0x9C, 0x7F, 0x0C, + 0x18, 0xBA, 0x3B, 0xD6, 0x8E, 0x14, 0x2A, 0xE4, 0x1B, 0x52, 0x9F, 0x2B, 0x7D, 0xE1, 0xFB, 0x6A, + 0x33, 0x02, 0xFA, 0xAC, 0x5A, 0xF2, 0x3E, 0x88, 0x7E, 0xAE, 0xD1, 0xF3, 0x78, 0xE8, 0x05, 0xD1, + 0xE3, 0xDC, 0x21, 0xF6, 0xE1, 0x9A, 0xBD, 0x17, 0x0E, 0xD9, 0x46, 0x9B, 0x88, 0x03, 0xEA, 0xF6, + 0x66, 0xBE, 0x0E, 0x1B, 0x50, 0x49, 0x96, 0x40, 0x97, 0xF1, 0xF1, 0xE4, 0x80, 0xA6, 0x6E, 0xE8, + 0x77, 0x34, 0xBF, 0x29, 0x40, 0x44, 0xC2, 0xFF, 0x4E, 0x98, 0xD3, 0x9C, 0xA3, 0x32, 0x2B, 0x76, + 0x51, 0x04, 0x09, 0xE7, 0xA9, 0xD1, 0xA6, 0x32, 0xB1, 0x23, 0x53, 0xE2, 0x47, 0xAB, 0xD6, 0xF5, + 0x69, 0x5C, 0x3E, 0x5F, 0xFA, 0xAE, 0x45, 0x20, 0xE5, 0xD2, 0x44, 0xFF, 0x39, 0x32, 0x6D, 0xFD, + 0x27, 0x57, 0x5C, 0xFD, 0xF0, 0xDE, 0xC1, 0xB5, 0x99, 0xE5, 0xF5, 0x1C, 0x77, 0x01, 0x75, 0xC5, + 0x6D, 0x58, 0x92, 0xF2, 0xB2, 0x47, 0x00, 0x01, 0x26, 0x96, 0x7A, 0x30, 0xFF, 0xB7, 0xF0, 0xEF, + 0x77, 0xC1, 0x8A, 0x5D, 0xDC, 0xC0, 0xD1, 0x29, 0x30, 0x1E, 0x77, 0x38, 0x7A, 0x94, 0xF1, 0xB8, + 0x7A, 0x7E, 0xEF, 0xA4, 0xD1, 0xAC, 0x31, 0x4A, 0xF2, 0x5D, 0x64, 0x3D, 0xB2, 0xE2, 0xF0, 0x08, + 0x99, 0xFC, 0x70, 0xEE, 0x24, 0xA7, 0x7E, 0xEE, 0x1E, 0x20, 0x69, 0x7D, 0x44, 0xBF, 0x87, 0x42, + 0xDF, 0x88, 0x3B, 0x0C, 0xDA, 0x42, 0xC9, 0x04, 0xF9, 0x45, 0x50, 0xFC, 0x83, 0x8F, 0x11, 0x6A, + 0x72, 0xBC, 0x99, 0x95, 0xF0, 0xAC, 0x3D, 0xA7, 0x3B, 0xCD, 0x1C, 0xE2, 0x88, 0x79, 0x37, 0x11, + 0x5F, 0x39, 0x89, 0x95, 0x0A, 0x16, 0x84, 0x7A, 0xF6, 0x8A, 0xA4, 0x28, 0xE4, 0xED, 0x83, 0x80, + 0x3B, 0xB1, 0x23, 0xA5, 0x03, 0x10, 0xF4, 0x66, 0xEA, 0xBB, 0x0C, 0x0F, 0xC5, 0xEC, 0x6C, 0x69, + 0xC5, 0xD3, 0x24, 0xAB, 0xD4, 0x2A, 0xB7, 0x99, 0x88, 0x76, 0x08, 0xA0, 0xA8, 0x95, 0x7C, 0xD8, + 0x38, 0x6D, 0xCD, 0x59, 0x02, 0x51, 0x4B, 0xF1, 0xB5, 0x2B, 0x50, 0xE3, 0xB6, 0xBD, 0xD0, 0x72, + 0xCF, 0x9E, 0xFD, 0x6E, 0xBB, 0x44, 0xC8, 0x24, 0x8A, 0x77, 0x18, 0x8A, 0x13, 0x06, 0xEF, 0x97, + 0x7D, 0xFA, 0x81, 0xF0, 0x31, 0xE6, 0xFA, 0x77, 0xED, 0x31, 0x06, 0x31, 0x5B, 0x54, 0x8A, 0x9F, + 0x30, 0x68, 0xDB, 0xE2, 0x40, 0xF8, 0x4E, 0x73, 0xFA, 0xAB, 0x74, 0x8B, 0x10, 0x58, 0x13, 0xDC, + 0xD2, 0xE6, 0x78, 0xD1, 0x32, 0x2E, 0x8A, 0x9F, 0x2C, 0x58, 0x06, 0x48, 0x27, 0xC5, 0xA9, 0x5E, + 0x81, 0x47, 0x89, 0x46, 0x21, 0x91, 0x03, 0x70, 0xA4, 0x3E, 0x88, 0x9C, 0xDA, 0x33, 0x0A, 0xCE, + 0xBC, 0x8B, 0x8E, 0xCF, 0x9F, 0xD3, 0x71, 0x80, 0x43, 0xCF, 0x6B, 0xA9, 0x51, 0x83, 0x76, 0x30, + 0x82, 0xC5, 0x6A, 0x85, 0x39, 0x11, 0x50, 0x1A, 0x82, 0xDC, 0x1E, 0x1C, 0xD5, 0x7D, 0xA9, 0x71, + 0x99, 0x33, 0x47, 0x19, 0x97, 0xB3, 0x5A, 0xB1, 0xDF, 0xED, 0xA4, 0xF2, 0xE6, 0x26, 0x84, 0xA2, + 0x28, 0x9A, 0x9E, 0xDF, 0xA6, 0x6A, 0xF4, 0xD6, 0xFC, 0x2E, 0x5B, 0x9D, 0x1A, 0x2A, 0x27, 0x68, + 0xFB, 0xC1, 0x83, 0x21, 0x4B, 0x90, 0xE0, 0x36, 0xDD, 0x5B, 0x31, 0x42, 0x55, 0xA0, 0x13, 0xF7, + 0xD0, 0x89, 0x53, 0x71, 0x99, 0x57, 0x09, 0x29, 0xC5, 0xF3, 0x21, 0xF8, 0x37, 0x2F, 0x40, 0xF3, + 0xD4, 0xAF, 0x16, 0x08, 0x36, 0x02, 0xFC, 0x77, 0xC5, 0x8B, 0x04, 0x90, 0x56, 0xB9, 0xC9, 0x67, + 0x9A, 0x99, 0xE8, 0x00, 0xD3, 0x86, 0xFF, 0x97, 0x2D, 0x08, 0xE9, 0xB7, 0xB3, 0x91, 0xBC, 0xDF, + 0x45, 0xC6, 0xED, 0x0F, 0x8C, 0x4C, 0x1E, 0xE6, 0x5B, 0x6E, 0x38, 0x30, 0xE4, 0xAA, 0xE3, 0x95, + 0xDE, 0xB9, 0xE4, 0x9A, 0xF5, 0xB2, 0x55, 0x9A, 0x87, 0x9B, 0xF6, 0x6A, 0xB2, 0xF2, 0x77, 0x9A, + 0x31, 0xF4, 0x7A, 0x31, 0xD1, 0x1D, 0x04, 0xC0, 0x7C, 0x32, 0xA2, 0x9E, 0x9A, 0xF5, 0x62, 0xF8, + 0x27, 0x8D, 0xBF, 0x51, 0xFF, 0xD3, 0xDF, 0x64, 0x37, 0x3F, 0x2A, 0x6F, 0x76, 0x3A, 0x7D, 0x77, + 0x06, 0x9E, 0x77, 0x7F, 0x5E, 0xEB, 0x32, 0x51, 0xF9, 0x16, 0x66, 0x9A, 0x09, 0xF3, 0xB0, 0x08, + 0xA4, 0x70, 0x96, 0x46, 0x30, 0xFF, 0xDA, 0x4F, 0xE9, 0x1B, 0xED, 0x8D, 0xF8, 0x74, 0x1F, 0x31, + 0x92, 0xB3, 0x73, 0x17, 0x36, 0xDB, 0x91, 0x30, 0xD6, 0x88, 0x55, 0x6B, 0x34, 0x77, 0x87, 0x7A, + 0xE7, 0xEE, 0x06, 0xC6, 0x1C, 0x8C, 0x19, 0x0C, 0x48, 0x46, 0x23, 0x5E, 0x9C, 0x07, 0x5C, 0xBF, + 0xB4, 0x7E, 0xD6, 0x4F, 0x74, 0x9C, 0xE2, 0xC5, 0x50, 0x8B, 0xC5, 0x8B, 0x15, 0x90, 0x60, 0x62, + 0x57, 0x29, 0xD0, 0x13, 0x43, 0xA1, 0x80, 0x88, 0x91, 0x00, 0x44, 0xC7, 0x4D, 0x19, 0x86, 0xCC, + 0x2F, 0x2A, 0x75, 0x5A, 0xFC, 0xEB, 0x97, 0x2A, 0x70, 0xE3, 0x78, 0xD8, 0x91, 0xB0, 0x4F, 0x99, + 0x07, 0xA3, 0x95, 0xEA, 0x24, 0x21, 0xD5, 0xDE, 0x51, 0x20, 0x93, 0x27, 0x0A, 0x30, 0x73, 0xA8, + 0xFF, 0x8A, 0x97, 0xE9, 0xA7, 0x6A, 0x8E, 0x0D, 0xE8, 0xF0, 0xDF, 0xEC, 0xEA, 0xB4, 0x6C, 0x1D, + 0x39, 0x2A, 0x62, 0x2D, 0x3D, 0x5A, 0x8B, 0x65, 0xF8, 0x90, 0x05, 0x2E, 0x7E, 0x91, 0x2C, 0x78, + 0xEF, 0x8E, 0x7A, 0xC1, 0x2F, 0xAC, 0x78, 0xEE, 0xAF, 0x28, 0x45, 0x06, 0x4C, 0x26, 0xAF, 0x3B, + 0xA2, 0xDB, 0xA3, 0x93, 0x06, 0xB5, 0x3C, 0xA5, 0xD8, 0xEE, 0x8F, 0xAF, 0x25, 0xCC, 0x3F, 0x85, + 0x68, 0x48, 0xA9, 0x62, 0xCC, 0x97, 0x8F, 0x7F, 0x2A, 0xEA, 0xE0, 0x15, 0x0A, 0xAD, 0x62, 0x07, + 0xBD, 0x45, 0xF8, 0x41, 0xD8, 0x36, 0xCB, 0x4C, 0xDB, 0x6E, 0xE6, 0x3A, 0xE7, 0xDA, 0x15, 0xE9, + 0x29, 0x1E, 0x12, 0x10, 0xA0, 0x14, 0x2C, 0x0E, 0x3D, 0xF4, 0xBF, 0x39, 0x41, 0x92, 0x75, 0x0B, + 0x25, 0x7B, 0xA3, 0xCE, 0x39, 0x9C, 0x15, 0x64, 0xC8, 0xFA, 0x3D, 0xEF, 0x73, 0x27, 0xFE, 0x26, + 0x2E, 0xCE, 0xDA, 0x6E, 0xFD, 0x71, 0x8E, 0xDD, 0xFE, 0x76, 0xEE, 0xDC, 0x12, 0x5C, 0x02, 0xC5, + 0x3A, 0x4E, 0x4E, 0x4F, 0xBF, 0xCA, 0x40, 0x15, 0xC7, 0x6E, 0x8D, 0x41, 0xF1, 0x10, 0xE0, 0x4F, + 0x7E, 0x97, 0x7F, 0x1C, 0xAE, 0x47, 0x8E, 0x6B, 0xB1, 0x25, 0x31, 0xB0, 0x73, 0xC7, 0x1B, 0x97, + 0x79, 0xF9, 0x80, 0xD3, 0x66, 0x22, 0x30, 0x07, 0x74, 0x1E, 0xE4, 0xD0, 0x80, 0x21, 0xD6, 0xEE, + 0x6B, 0x6C, 0x4F, 0xBF, 0xF5, 0xB7, 0xD9, 0x09, 0x87, 0x2F, 0xA9, 0x14, 0xBE, 0x27, 0xD9, 0x72, + 0x50, 0x01, 0xD4, 0x13, 0x73, 0xA6, 0xA7, 0x51, 0x02, 0x75, 0x25, 0xE1, 0xB3, 0x45, 0x34, 0x7D, + 0xA8, 0x8E, 0xEB, 0xF3, 0x16, 0x49, 0xCB, 0x4F, 0x8C, 0xA1, 0xB9, 0x36, 0x85, 0x39, 0x75, 0x5D, + 0x08, 0x00, 0xAE, 0xEB, 0xF6, 0xEA, 0xD7, 0x13, 0x3A, 0x21, 0x5A, 0x5F, 0x30, 0x84, 0x52, 0x26, + 0x95, 0xC9, 0x14, 0xF2, 0x57, 0x55, 0x6B, 0xB1, 0x10, 0xC2, 0xE1, 0xBD, 0x3B, 0x51, 0xC0, 0xB7, + 0x55, 0x4C, 0x71, 0x12, 0x26, 0xC7, 0x0D, 0xF9, 0x51, 0xA4, 0x38, 0x02, 0x05, 0x7F, 0xB8, 0xF1, + 0x72, 0x4B, 0xBF, 0x71, 0x89, 0x14, 0xF3, 0x77, 0x38, 0xD9, 0x71, 0x24, 0xF3, 0x00, 0x11, 0xA1, + 0xD8, 0xD4, 0x69, 0x27, 0x08, 0x37, 0x35, 0xC9, 0x11, 0x9D, 0x90, 0x1C, 0x0E, 0xE7, 0x1C, 0xFF, + 0x2D, 0x1E, 0xE8, 0x92, 0xE1, 0x18, 0x10, 0x95, 0x7C, 0xE0, 0x80, 0xF4, 0x96, 0x43, 0x21, 0xF9, + 0x75, 0x21, 0x64, 0x38, 0xDD, 0x9F, 0x1E, 0x95, 0x16, 0xDA, 0x56, 0x1D, 0x4F, 0x9A, 0x53, 0xB2, + 0xE2, 0xE4, 0x18, 0xCB, 0x6B, 0x1A, 0x65, 0xEB, 0x56, 0xC6, 0x3B, 0xE5, 0xFE, 0xD8, 0x26, 0x3F, + 0x3A, 0x84, 0x59, 0x72, 0x66, 0xA2, 0xF3, 0x75, 0xFF, 0xFB, 0x60, 0xB3, 0x22, 0xAD, 0x3F, 0x2D, + 0x6B, 0xF9, 0xEB, 0xEA, 0x05, 0x7C, 0xD8, 0x8F, 0x6D, 0x2C, 0x98, 0x9E, 0x2B, 0x93, 0xF1, 0x5E, + 0x46, 0xF0, 0x87, 0x49, 0x29, 0x73, 0x68, 0xD7, 0x7F, 0xF9, 0xF0, 0xE5, 0x7D, 0xDB, 0x1D, 0x75, + 0x19, 0xF3, 0xC4, 0x58, 0x9B, 0x17, 0x88, 0xA8, 0x92, 0xE0, 0xBE, 0xBD, 0x8B, 0x1D, 0x8D, 0x9F, + 0x56, 0x76, 0xAD, 0xAF, 0x29, 0xE2, 0xD9, 0xD5, 0x52, 0xF6, 0xB5, 0x56, 0x35, 0x57, 0x3A, 0xC8, + 0xE1, 0x56, 0x43, 0x19, 0x94, 0xD3, 0x04, 0x9B, 0x6D, 0x35, 0xD8, 0x0B, 0x5F, 0x4D, 0x19, 0x8E, + 0xEC, 0xFA, 0x64, 0x91, 0x0A, 0x72, 0x20, 0x2B, 0xBC, 0x1A, 0x4A, 0xFE, 0x8B, 0xFD, 0xBB, 0xED, + 0x1B, 0x23, 0xEA, 0xAD, 0x72, 0x82, 0xA1, 0x29, 0x99, 0x71, 0xBD, 0xF0, 0x95, 0xC1, 0x03, 0xDD, + 0x7B, 0xC2, 0xB2, 0x3C, 0x28, 0x54, 0xD3, 0x68, 0xA4, 0x72, 0xC8, 0x66, 0x96, 0xE0, 0xD1, 0xD8, + 0x7F, 0xF8, 0xD1, 0x26, 0x2B, 0xF7, 0xAD, 0xBA, 0x55, 0xCA, 0x15, 0xB9, 0x32, 0xC3, 0xE5, 0x88, + 0x97, 0x8E, 0x5C, 0xFB, 0x92, 0x25, 0x8B, 0xBF, 0xA2, 0x45, 0x55, 0x7A, 0xA7, 0x6F, 0x8B, 0x57, + 0x5B, 0xCF, 0x0E, 0xCB, 0x1D, 0xFB, 0x20, 0x82, 0x77, 0xA8, 0x8C, 0xCC, 0x16, 0xCE, 0x1D, 0xFA, + 0xDE, 0xCC, 0x0B, 0x62, 0xFE, 0xCC, 0xE1, 0xB7, 0xF0, 0xC3, 0x81, 0x64, 0x73, 0x40, 0xA0, 0xC2, + 0x4D, 0x89, 0x11, 0x75, 0x33, 0x55, 0x33, 0x8D, 0xE8, 0x4A, 0xFD, 0xEA, 0x6E, 0x30, 0x0B, 0xD7, + 0x31, 0x2C, 0xDE, 0x47, 0xE3, 0xBF, 0xF8, 0x55, 0x42, 0xE2, 0x7F, 0x59, 0xE5, 0x17, 0xEF, 0x99, + 0x34, 0x69, 0x91, 0xB1, 0x23, 0x8E, 0x20, 0x87, 0x2D, 0xA8, 0xFE, 0xD5, 0x8A, 0xF3, 0x84, 0x3A, + 0xF0, 0x37, 0xE4, 0x09, 0x00, 0x54, 0xEE, 0x67, 0x49, 0x93, 0xE4, 0x81, 0x70, 0xE3, 0x90, 0x4D, + 0xEF, 0xFE, 0x41, 0xB7, 0x99, 0x7B, 0xC1, 0x83, 0xBA, 0x62, 0x12, 0x6F, 0x7D, 0xDE, 0x6B, 0xAF, + 0xDA, 0x16, 0xF9, 0x55, 0x51, 0xEE, 0xA6, 0x0C, 0x2B, 0x02, 0xA3, 0xFD, 0x8D, 0xFB, 0x30, 0x17, + 0xE4, 0x6F, 0xDF, 0x36, 0x71, 0xC4, 0xCA, 0x87, 0x25, 0x48, 0xB0, 0x47, 0xEC, 0xEA, 0xB4, 0xBF, + 0xA5, 0x4D, 0x9B, 0x9F, 0x02, 0x93, 0xC4, 0xE3, 0xE4, 0xE8, 0x42, 0x2D, 0x68, 0x81, 0x15, 0x0A, + 0xEB, 0x84, 0x5B, 0xD6, 0xA8, 0x74, 0xFB, 0x7D, 0x1D, 0xCB, 0x2C, 0xDA, 0x46, 0x2A, 0x76, 0x62, + 0xCE, 0xBC, 0x5C, 0x9E, 0x8B, 0xE7, 0xCF, 0xBE, 0x78, 0xF5, 0x7C, 0xEB, 0xB3, 0x3A, 0x9C, 0xAA, + 0x6F, 0xCC, 0x72, 0xD1, 0x59, 0xF2, 0x11, 0x23, 0xD6, 0x3F, 0x48, 0xD1, 0xB7, 0xCE, 0xB0, 0xBF, + 0xCB, 0xEA, 0x80, 0xDE, 0x57, 0xD4, 0x5E, 0x97, 0x2F, 0x75, 0xD1, 0x50, 0x8E, 0x80, 0x2C, 0x66, + 0x79, 0xBF, 0x72, 0x4B, 0xBD, 0x8A, 0x81, 0x6C, 0xD3, 0xE1, 0x01, 0xDC, 0xD2, 0x15, 0x26, 0xC5, + 0x36, 0xDA, 0x2C, 0x1A, 0xC0, 0x27, 0x94, 0xED, 0xB7, 0x9B, 0x85, 0x0B, 0x5E, 0x80, 0x97, 0xC5, + 0xEC, 0x4F, 0xEC, 0x88, 0x5D, 0x50, 0x07, 0x35, 0x47, 0xDC, 0x0B, 0x3B, 0x3D, 0xDD, 0x60, 0xAF, + 0xA8, 0x5D, 0x81, 0x38, 0x24, 0x25, 0x5D, 0x5C, 0x15, 0xD1, 0xDE, 0xB3, 0xAB, 0xEC, 0x05, 0x69, + 0xEF, 0x83, 0xED, 0x57, 0x54, 0xB8, 0x64, 0x64, 0x11, 0x16, 0x32, 0x69, 0xDA, 0x9F, 0x2D, 0x7F, + 0x36, 0xBB, 0x44, 0x5A, 0x34, 0xE8, 0x7F, 0xBF, 0x03, 0xEB, 0x00, 0x7F, 0x59, 0x68, 0x22, 0x79, + 0xCF, 0x73, 0x6C, 0x2C, 0x29, 0xA7, 0xA1, 0x5F, 0x38, 0xA1, 0x1D, 0xF0, 0x20, 0x53, 0xE0, 0x1A, + 0x63, 0x14, 0x58, 0x71, 0x10, 0xAA, 0x08, 0x0C, 0x3E, 0x16, 0x1A, 0x60, 0x22, 0x82, 0x7F, 0xBA, + 0xA4, 0x43, 0xA0, 0xD0, 0xAC, 0x1B, 0xD5, 0x6B, 0x64, 0xB5, 0x14, 0x93, 0x31, 0x9E, 0x53, 0x50, + 0xD0, 0x57, 0x66, 0xEE, 0x5A, 0x4F, 0xFB, 0x03, 0x2A, 0x69, 0x58, 0x76, 0xF1, 0x83, 0xF7, 0x4E, + 0xBA, 0x8C, 0x42, 0x06, 0x60, 0x5D, 0x6D, 0xCE, 0x60, 0x88, 0xAE, 0xA4, 0xC3, 0xF1, 0x03, 0xA5, + 0x4B, 0x98, 0xA1, 0xFF, 0x67, 0xE1, 0xAC, 0xA2, 0xB8, 0x62, 0xD7, 0x6F, 0xA0, 0x31, 0xB4, 0xD2, + 0x77, 0xAF, 0x21, 0x10, 0x06, 0xC6, 0x9A, 0xFF, 0x1D, 0x09, 0x17, 0x0E, 0x5F, 0xF1, 0xAA, 0x54, + 0x34, 0x4B, 0x45, 0x8A, 0x87, 0x63, 0xA6, 0xDC, 0xF9, 0x24, 0x30, 0x67, 0xC6, 0xB2, 0xD6, 0x61, + 0x33, 0x69, 0xEE, 0x50, 0x61, 0x57, 0x28, 0xE7, 0x7E, 0xEE, 0xEC, 0x3A, 0x5A, 0x73, 0x4E, 0xA8, + 0x8D, 0xE4, 0x18, 0xEA, 0xEC, 0x41, 0x64, 0xC8, 0xE2, 0xE8, 0x66, 0xB6, 0x2D, 0xB6, 0xFB, 0x6A, + 0x6C, 0x16, 0xB3, 0xDD, 0x46, 0x43, 0xB9, 0x73, 0x00, 0x6A, 0x71, 0xED, 0x4E, 0x9D, 0x25, 0x1A, + 0xC3, 0x3C, 0x4A, 0x95, 0x15, 0x99, 0x35, 0x81, 0x14, 0x02, 0xD6, 0x98, 0x9B, 0xEC, 0xD8, 0x23, + 0x3B, 0x84, 0x29, 0xAF, 0x0C, 0x99, 0x83, 0xA6, 0x9A, 0x34, 0x4F, 0xFA, 0xE8, 0xD0, 0x3C, 0x4B, + 0xD0, 0xFB, 0xB6, 0x68, 0xB8, 0x9E, 0x8F, 0xCD, 0xF7, 0x60, 0x2D, 0x7A, 0x22, 0xE5, 0x7D, 0xAB, + 0x65, 0x1B, 0x95, 0xA7, 0xA8, 0x7F, 0xB6, 0x77, 0x47, 0x7B, 0x5F, 0x8B, 0x12, 0x72, 0xD0, 0xD4, + 0x91, 0xEF, 0xDE, 0x19, 0x50, 0x3C, 0xA7, 0x8B, 0xC4, 0xA9, 0xB3, 0x23, 0xCB, 0x76, 0xE6, 0x81, + 0xF0, 0xC1, 0x04, 0x8F, 0xA3, 0xB8, 0x54, 0x5B, 0x97, 0xAC, 0x19, 0xFF, 0x3F, 0x55, 0x27, 0x2F, + 0xE0, 0x1D, 0x42, 0x9B, 0x57, 0xFC, 0x4B, 0x4E, 0x0F, 0xCE, 0x98, 0xA9, 0x43, 0x57, 0x03, 0xBD, + 0xE7, 0xC8, 0x94, 0xDF, 0x6E, 0x36, 0x73, 0x32, 0xB4, 0xEF, 0x2E, 0x85, 0x7A, 0x6E, 0xFC, 0x6C, + 0x18, 0x82, 0x75, 0x35, 0x90, 0x07, 0xF3, 0xE4, 0x9F, 0x3E, 0xDC, 0x68, 0xF3, 0xB5, 0xF3, 0x19, + 0x80, 0x92, 0x06, 0x99, 0xA2, 0xE8, 0x6F, 0xFF, 0x2E, 0x7F, 0xAE, 0x42, 0xA4, 0x5F, 0xFB, 0xD4, + 0x0E, 0x81, 0x2B, 0xC3, 0x04, 0xFF, 0x2B, 0xB3, 0x74, 0x4E, 0x36, 0x5B, 0x9C, 0x15, 0x00, 0xC6, + 0x47, 0x2B, 0xE8, 0x8B, 0x3D, 0xF1, 0x9C, 0x03, 0x9A, 0x58, 0x7F, 0x9B, 0x9C, 0xBF, 0x85, 0x49, + 0x79, 0x35, 0x2E, 0x56, 0x7B, 0x41, 0x14, 0x39, 0x47, 0x83, 0x26, 0xAA, 0x07, 0x89, 0x98, 0x11, + 0x1B, 0x86, 0xE7, 0x73, 0x7A, 0xD8, 0x7D, 0x78, 0x61, 0x53, 0xE9, 0x79, 0xF5, 0x36, 0x8D, 0x44, + 0x92, 0x84, 0xF9, 0x13, 0x50, 0x58, 0x3B, 0xA4, 0x6A, 0x36, 0x65, 0x49, 0x8E, 0x3C, 0x0E, 0xF1, + 0x6F, 0xD2, 0x84, 0xC4, 0x7E, 0x8E, 0x3F, 0x39, 0xAE, 0x7C, 0x84, 0xF1, 0x63, 0x37, 0x8E, 0x3C, + 0xCC, 0x3E, 0x44, 0x81, 0x45, 0xF1, 0x4B, 0xB9, 0xED, 0x6B, 0x36, 0x5D, 0xBB, 0x20, 0x60, 0x1A, + 0x0F, 0xA3, 0xAA, 0x55, 0x77, 0x3A, 0xA9, 0xAE, 0x37, 0x4D, 0xBA, 0xB8, 0x86, 0x6B, 0xBC, 0x08, + 0x50, 0xF6, 0xCC, 0xA4, 0xBD, 0x1D, 0x40, 0x72, 0xA5, 0x86, 0xFA, 0xE2, 0x10, 0xAE, 0x3D, 0x58, + 0x4B, 0x97, 0xF3, 0x43, 0x74, 0xA9, 0x9E, 0xEB, 0x21, 0xB7, 0x01, 0xA4, 0x86, 0x93, 0x97, 0xEE, + 0x2F, 0x4F, 0x3B, 0x86, 0xA1, 0x41, 0x6F, 0x41, 0x26, 0x90, 0x78, 0x5C, 0x7F, 0x30, 0x38, 0x4B, + 0x3F, 0xAA, 0xEC, 0xED, 0x5C, 0x6F, 0x0E, 0xAD, 0x43, 0x87, 0xFD, 0x93, 0x35, 0xE6, 0x01, 0xEF, + 0x41, 0x26, 0x90, 0x99, 0x9E, 0xFB, 0x19, 0x5B, 0xAD, 0xD2, 0x91, 0x8A, 0xE0, 0x46, 0xAF, 0x65, + 0xFA, 0x4F, 0x84, 0xC1, 0xA1, 0x2D, 0xCF, 0x45, 0x8B, 0xD3, 0x85, 0x50, 0x55, 0x7C, 0xF9, 0x67, + 0x88, 0xD4, 0x4E, 0xE9, 0xD7, 0x6B, 0x61, 0x54, 0xA1, 0xA4, 0xA6, 0xA2, 0xC2, 0xBF, 0x30, 0x9C, + 0x40, 0x9F, 0x5F, 0xD7, 0x69, 0x2B, 0x24, 0x82, 0x5E, 0xD9, 0xD6, 0xA7, 0x12, 0x54, 0x1A, 0xF7, + 0x55, 0x9F, 0x76, 0x50, 0xA9, 0x95, 0x84, 0xE6, 0x6B, 0x6D, 0xB5, 0x96, 0x54, 0xD6, 0xCD, 0xB3, + 0xA1, 0x9B, 0x46, 0xA7, 0x94, 0x4D, 0xC4, 0x94, 0xB4, 0x98, 0xE3, 0xE1, 0xE2, 0x34, 0xD5, 0x33, + 0x16, 0x07, 0x54, 0xCD, 0xB7, 0x77, 0x53, 0xDB, 0x4F, 0x4D, 0x46, 0x9D, 0xE9, 0xD4, 0x9C, 0x8A, + 0x36, 0xB6, 0xB8, 0x38, 0x26, 0x6C, 0x0E, 0xFF, 0x9C, 0x1B, 0x43, 0x8B, 0x80, 0xCC, 0xB9, 0x3D, + 0xDA, 0xC7, 0xF1, 0x8A, 0xF2, 0x6D, 0xB8, 0xD7, 0x74, 0x2F, 0x7E, 0x1E, 0xB7, 0xD3, 0x4A, 0xB4, + 0xAC, 0xFC, 0x79, 0x48, 0x6C, 0xBC, 0x96, 0xB6, 0x94, 0x46, 0x57, 0x2D, 0xB0, 0xA3, 0xFC, 0x1E, + 0xB9, 0x52, 0x60, 0x85, 0x2D, 0x41, 0xD0, 0x43, 0x01, 0x1E, 0x1C, 0xD5, 0x7D, 0xFC, 0xF3, 0x96, + 0x0D, 0xC7, 0xCB, 0x2A, 0x29, 0x9A, 0x93, 0xDD, 0x88, 0x2D, 0x37, 0x5D, 0xAA, 0xFB, 0x49, 0x68, + 0xA0, 0x9C, 0x50, 0x86, 0x7F, 0x68, 0x56, 0x57, 0xF9, 0x79, 0x18, 0x39, 0xD4, 0xE0, 0x01, 0x84, + 0x33, 0x61, 0xCA, 0xA5, 0xD2, 0xD6, 0xE4, 0xC9, 0x8A, 0x4A, 0x23, 0x44, 0x4E, 0xBC, 0xF0, 0xDC, + 0x24, 0xA1, 0xA0, 0xC4, 0xE2, 0x07, 0x3C, 0x10, 0xC4, 0xB5, 0x25, 0x4B, 0x65, 0x63, 0xF4, 0x80, + 0xE7, 0xCF, 0x61, 0xB1, 0x71, 0x82, 0x21, 0x87, 0x2C, 0xF5, 0x91, 0x00, 0x32, 0x0C, 0xEC, 0xA9, + 0xB5, 0x9A, 0x74, 0x85, 0xE3, 0x36, 0x8F, 0x76, 0x4F, 0x9C, 0x6D, 0xCE, 0xBC, 0xAD, 0x0A, 0x4B, + 0xED, 0x76, 0x04, 0xCB, 0xC3, 0xB9, 0x33, 0x9E, 0x01, 0x93, 0x96, 0x69, 0x7D, 0xC5, 0xA2, 0x45, + 0x79, 0x9B, 0x04, 0x5C, 0x84, 0x09, 0xED, 0x88, 0x43, 0xC7, 0xAB, 0x93, 0x14, 0x26, 0xA1, 0x40, + 0xB5, 0xCE, 0x4E, 0xBF, 0x2A, 0x42, 0x85, 0x3E, 0x2C, 0x3B, 0x54, 0xE8, 0x12, 0x1F, 0x0E, 0x97, + 0x59, 0xB2, 0x27, 0x89, 0xFA, 0xF2, 0xDF, 0x8E, 0x68, 0x59, 0xDC, 0x06, 0xBC, 0xB6, 0x85, 0x0D, + 0x06, 0x22, 0xEC, 0xB1, 0xCB, 0xE5, 0x04, 0xE6, 0x3D, 0xB3, 0xB0, 0x41, 0x73, 0x08, 0x3F, 0x3C, + 0x58, 0x86, 0x63, 0xEB, 0x50, 0xEE, 0x1D, 0x2C, 0x37, 0x74, 0xA9, 0xD3, 0x18, 0xA3, 0x47, 0x6E, + 0x93, 0x54, 0xAD, 0x0A, 0x5D, 0xB8, 0x2A, 0x55, 0x5D, 0x78, 0xF6, 0xEE, 0xBE, 0x8E, 0x3C, 0x76, + 0x69, 0xB9, 0x40, 0xC2, 0x34, 0xEC, 0x2A, 0xB9, 0xED, 0x7E, 0x20, 0xE4, 0x8D, 0x00, 0x38, 0xC7, + 0xE6, 0x8F, 0x44, 0xA8, 0x86, 0xCE, 0xEB, 0x2A, 0xE9, 0x90, 0xF1, 0x4C, 0xDF, 0x32, 0xFB, 0x73, + 0x1B, 0x6D, 0x92, 0x1E, 0x95, 0xFE, 0xB4, 0xDB, 0x65, 0xDF, 0x4D, 0x23, 0x54, 0x89, 0x48, 0xBF, + 0x4A, 0x2E, 0x70, 0xD6, 0xD7, 0x62, 0xB4, 0x33, 0x29, 0xB1, 0x3A, 0x33, 0x4C, 0x23, 0x6D, 0xA6, + 0x76, 0xA5, 0x21, 0x63, 0x48, 0xE6, 0x90, 0x5D, 0xED, 0x90, 0x95, 0x0B, 0x7A, 0x84, 0xBE, 0xB8, + 0x0D, 0x5E, 0x63, 0x0C, 0x62, 0x26, 0x4C, 0x14, 0x5A, 0xB3, 0xAC, 0x23, 0xA4, 0x74, 0xA7, 0x6F, + 0x33, 0x30, 0x05, 0x60, 0x01, 0x42, 0xA0, 0x28, 0xB7, 0xEE, 0x19, 0x38, 0xF1, 0x64, 0x80, 0x82, + 0x43, 0xE1, 0x41, 0x27, 0x1F, 0x1F, 0x90, 0x54, 0x7A, 0xD5, 0x23, 0x2E, 0xD1, 0x3D, 0xCB, 0x28, + 0xBA, 0x58, 0x7F, 0xDC, 0x7C, 0x91, 0x24, 0xE9, 0x28, 0x51, 0x83, 0x6E, 0xC5, 0x56, 0x21, 0x42, + 0xED, 0xA0, 0x56, 0x22, 0xA1, 0x40, 0x80, 0x6B, 0xA8, 0xF7, 0x94, 0xCA, 0x13, 0x6B, 0x0C, 0x39, + 0xD9, 0xFD, 0xE9, 0xF3, 0x6F, 0xA6, 0x9E, 0xFC, 0x70, 0x8A, 0xB3, 0xBC, 0x59, 0x3C, 0x1E, 0x1D, + 0x6C, 0xF9, 0x7C, 0xAF, 0xF9, 0x88, 0x71, 0x95, 0xEB, 0x57, 0x00, 0xBD, 0x9F, 0x8C, 0x4F, 0xE1, + 0x24, 0x83, 0xC5, 0x22, 0xEA, 0xFD, 0xD3, 0x0C, 0xE2, 0x17, 0x18, 0x7C, 0x6A, 0x4C, 0xDE, 0x77, + 0xB4, 0x53, 0x9B, 0x4C, 0x81, 0xCD, 0x23, 0x60, 0xAA, 0x0E, 0x25, 0x73, 0x9C, 0x02, 0x79, 0x32, + 0x30, 0xDF, 0x74, 0xDF, 0x75, 0x19, 0xF4, 0xA5, 0x14, 0x5C, 0xF7, 0x7A, 0xA8, 0xA5, 0x91, 0x84, + 0x7C, 0x60, 0x03, 0x06, 0x3B, 0xCD, 0x50, 0xB6, 0x27, 0x9C, 0xFE, 0xB1, 0xDD, 0xCC, 0xD3, 0xB0, + 0x59, 0x24, 0xB2, 0xCA, 0xE2, 0x1C, 0x81, 0x22, 0x9D, 0x07, 0x8F, 0x8E, 0xB9, 0xBE, 0x4E, 0xFA, + 0xFC, 0x39, 0x65, 0xBA, 0xBF, 0x9D, 0x12, 0x37, 0x5E, 0x97, 0x7E, 0xF3, 0x89, 0xF5, 0x5D, 0xF5, + 0xE3, 0x09, 0x8C, 0x62, 0xB5, 0x20, 0x9D, 0x0C, 0x53, 0x8A, 0x68, 0x1B, 0xD2, 0x8F, 0x75, 0x17, + 0x5D, 0xD4, 0xE5, 0xDA, 0x75, 0x62, 0x19, 0x14, 0x6A, 0x26, 0x2D, 0xEB, 0xF8, 0xAF, 0x37, 0xF0, + 0x6C, 0xA4, 0x55, 0xB1, 0xBC, 0xE2, 0x33, 0xC0, 0x9A, 0xCA, 0xB0, 0x11, 0x49, 0x4F, 0x68, 0x9B, + 0x3B, 0x6B, 0x3C, 0xCC, 0x13, 0xF6, 0xC7, 0x85, 0x61, 0x68, 0x42, 0xAE, 0xBB, 0xDD, 0xCD, 0x45, + 0x16, 0x29, 0x1D, 0xEA, 0xDB, 0xC8, 0x03, 0x94, 0x3C, 0xEE, 0x4F, 0x82, 0x11, 0xC3, 0xEC, 0x28, + 0xBD, 0x97, 0x05, 0x99, 0xDE, 0xD7, 0xBB, 0x5E, 0x22, 0x1F, 0xD4, 0xEB, 0x64, 0xD9, 0x92, 0xD9, + 0x85, 0xB7, 0x6A, 0x05, 0x6A, 0xE4, 0x24, 0x41, 0xF1, 0xCD, 0xF0, 0xD8, 0x3F, 0xF8, 0x9E, 0x0E, + 0xCD, 0x0B, 0x7A, 0x70, 0x6B, 0x5A, 0x75, 0x0A, 0x6A, 0x33, 0x88, 0xEC, 0x17, 0x75, 0x08, 0x70, + 0x10, 0x2F, 0x24, 0xCF, 0xC4, 0xE9, 0x42, 0x00, 0x61, 0x94, 0xCA, 0x1F, 0x3A, 0x76, 0x06, 0xFA, + 0xD2, 0x48, 0x81, 0xF0, 0x77, 0x60, 0x03, 0x45, 0xD9, 0x61, 0xF4, 0xA4, 0x6F, 0x3D, 0xD9, 0x30, + 0xC3, 0x04, 0x6B, 0x54, 0x2A, 0xB7, 0xEC, 0x3B, 0xF4, 0x4B, 0xF5, 0x68, 0x52, 0x26, 0xCE, 0xFF, + 0x5D, 0x19, 0x91, 0xA0, 0xA3, 0xA5, 0xA9, 0xB1, 0xE0, 0x23, 0xC4, 0x0A, 0x77, 0x4D, 0xF9, 0x51, + 0x20, 0xA3, 0xA5, 0xA9, 0xB1, 0xC1, 0x00, 0x82, 0x86, 0x8E, 0x7F, 0x5D, 0x19, 0x91, 0xA0, 0xA3, + 0xC4, 0xEB, 0x54, 0x0B, 0x75, 0x68, 0x52, 0x07, 0x8C, 0x9A, 0x97, 0x8D, 0x79, 0x70, 0x62, 0x46, + 0xEF, 0x5C, 0x1B, 0x95, 0x89, 0x71, 0x41, 0xE1, 0x21, 0xA1, 0xA1, 0xA1, 0xC0, 0x02, 0x67, 0x4C, + 0x1A, 0xB6, 0xCF, 0xFD, 0x78, 0x53, 0x24, 0xAB, 0xB5, 0xC9, 0xF1, 0x60, 0x23, 0xA5, 0xC8, 0x12, + 0x87, 0x6D, 0x58, 0x13, 0x85, 0x88, 0x92, 0x87, 0x6D, 0x58, 0x32, 0xC7, 0x0C, 0x9A, 0x97, 0xAC, + 0xDA, 0x36, 0xEE, 0x5E, 0x3E, 0xDF, 0x1D, 0xB8, 0xF2, 0x66, 0x2F, 0xBD, 0xF8, 0x72, 0x47, 0xED, + 0x58, 0x13, 0x85, 0x88, 0x92, 0x87, 0x8C, 0x7B, 0x55, 0x09, 0x90, 0xA2, 0xC6, 0xEF, 0x3D, 0xF8, + 0x53, 0x24, 0xAB, 0xD4, 0x2A, 0xB7, 0xEC, 0x5A, 0x36, 0xEE, 0x5E, 0x3E, 0xDF, 0x3C, 0xFA, 0x76, + 0x4F, 0xFD, 0x59, 0x30, 0xE2, 0x46, 0xEF, 0x3D, 0xF8, 0x53, 0x05, 0x69, 0x31, 0xC1, 0x00, 0x82, + 0x86, 0x8E, 0x7F, 0x5D, 0x19, 0xB0, 0xE2, 0x27, 0xCC, 0xFB, 0x74, 0x4B, 0x14, 0x8B, 0x94, 0x8B, + 0x75, 0x68, 0x33, 0xC5, 0x08, 0x92, 0x87, 0x8C, 0x9A, 0xB6, 0xCF, 0x1C, 0xBA, 0xD7, 0x0D, 0x98, + 0xB2, 0xE6, 0x2F, 0xDC, 0x1B, 0x95, 0x89, 0x71, 0x60, 0x23, 0xC4, 0x0A, 0x96, 0x8F, 0x9C, 0xBA, + 0xF6, 0x6E, 0x3F, 0xFC, 0x5B, 0x15, 0xA8, 0xD2, 0x26, 0xAF, 0xBD, 0xF8, 0x72, 0x66, 0x2F, 0xDC, + 0x1B, 0xB4, 0xCB, 0x14, 0x8B, 0x94, 0xAA, 0xB7, 0xCD, 0xF9, 0x51, 0x01, 0x80, 0x82, 0x86, 0x6F, + 0x3D, 0xD9, 0x30, 0xE2, 0x27, 0xCC, 0xFB, 0x74, 0x4B, 0x14, 0xAA, 0xB7, 0xCD, 0xF9, 0x70, 0x43, + 0x04, 0x6B, 0x35, 0xC9, 0xF1, 0x60, 0x23, 0xA5, 0xC8, 0xF3, 0x45, 0x08, 0x92, 0x87, 0x6D, 0x58, + 0x32, 0xE6, 0x2F, 0xBD, 0xF8, 0x72, 0x66, 0x4E, 0x1E, 0xBE, 0xFE, 0x7E, 0x7E, 0x7E, 0x5F, 0x1D, + 0x99, 0x91, 0xA0, 0xA3, 0xC4, 0x0A, 0x77, 0x4D, 0x18, 0x93, 0xA4, 0xAB, 0xD4, 0x0B, 0x75, 0x49, + 0x10, 0xA2, 0xC6, 0xEF, 0x3D, 0xF8, 0x53, 0x24, 0xAB, 0xB5, 0xE8, 0x33, 0xE4, 0x4A, 0x16, 0xAE, + 0xDE, 0x1F, 0xBC, 0xDB, 0x15, 0xA8, 0xB3, 0xC5, 0x08, 0x73, 0x45, 0xE9, 0x31, 0xC1, 0xE1, 0x21, + 0xA1, 0xA1, 0xA1, 0xC0, 0x02, 0x86, 0x6F, 0x5C, 0x3A, 0xD7, 0x0D, 0x98, 0x93, 0xA4, 0xCA, 0x16, + 0xAE, 0xDE, 0x1F, 0x9D, 0x99, 0xB0, 0xE2, 0x46, 0xEF, 0x3D, 0xF8, 0x72, 0x47, 0x0C, 0x9A, 0xB6, + 0xCF, 0xFD, 0x59, 0x11, 0xA0, 0xA3, 0xA5, 0xC8, 0xF3, 0x45, 0x08, 0x92, 0x87, 0x6D, 0x39, 0xF0, + 0x43, 0x04, 0x8A, 0x96, 0xAE, 0xDE, 0x3E, 0xDF, 0x1D, 0x99, 0x91, 0xA0, 0xC2, 0x06, 0x6F, 0x3D, + 0xF8, 0x72, 0x47, 0x0C, 0x9A, 0x97, 0x8D, 0x98, 0x93, 0x85, 0x88, 0x73, 0x45, 0xE9, 0x31, 0xE0, + 0x23, 0xA5, 0xA9, 0xD0, 0x03, 0x84, 0x8A, 0x96, 0xAE, 0xDE, 0x1F, 0xBC, 0xDB, 0x15, 0xA8, 0xD2, + 0x26, 0xCE, 0xFF, 0x5D, 0x19, 0x91, 0x81, 0x80, 0x82, 0x67, 0x2D, 0xD8, 0x13, 0xA4, 0xAB, 0xD4, + 0x0B, 0x94, 0xAA, 0xB7, 0xCD, 0xF9, 0x51, 0x20, 0xA3, 0xA5, 0xC8, 0xF3, 0x45, 0xE9, 0x50, 0x22, + 0xC6, 0xEF, 0x5C, 0x3A, 0xD7, 0x0D, 0x98, 0x93, 0x85, 0x88, 0x73, 0x64, 0x4A, 0xF7, 0x4D, 0xF9, + 0x51, 0x20, 0xA3, 0xC4, 0x0A, 0x96, 0xAE, 0xDE, 0x3E, 0xFE, 0x7E, 0x7E, 0x7E, 0x5F, 0x3C, 0xFA, + 0x76, 0x4F, 0xFD, 0x78, 0x72, 0x66, 0x2F, 0xBD, 0xD9, 0x30, 0xC3, 0xE5, 0x48, 0x12, 0x87, 0x8C, + 0x7B, 0x55, 0x28, 0xD2, 0x07, 0x8C, 0x9A, 0x97, 0xAC, 0xDA, 0x17, 0x8D, 0x79, 0x51, 0x20, 0xA3, + 0xC4, 0xEB, 0x54, 0x0B, 0x94, 0x8B, 0x94, 0xAA, 0xD6, 0x2E, 0xBF, 0xFC, 0x5B, 0x15, 0xA8, 0xD2, + 0x26, 0xAF, 0xDC, 0x1B, 0xB4, 0xEA, 0x37, 0xEC, 0x3B, 0xF4, 0x6A, 0x37, 0xCD, 0x18, 0x93, 0x85, + 0x69, 0x31, 0xC1, 0xE1, 0x40, 0xE3, 0x25, 0xC8, 0x12, 0x87, 0x8C, 0x9A, 0xB6, 0xCF, 0xFD, 0x59, + 0x11, 0xA0, 0xC2, 0x06, 0x8E, 0x7F, 0x5D, 0x38, 0xF2, 0x47, 0x0C, 0x7B, 0x74, 0x6A, 0x37, 0xEC, + 0x5A, 0x36, 0xEE, 0x3F, 0xFC, 0x7A, 0x76, 0x4F, 0x1C, 0x9B, 0x95, 0x89, 0x71, 0x41, 0x00, 0x63, + 0x44, 0xEB, 0x54, 0x2A, 0xD6, 0x0F, 0x9C, 0xBA, 0xD7, 0x0D, 0x98, 0x93, 0x85, 0x69, 0x31, 0xC1, + 0x00, 0x82, 0x86, 0x8E, 0x9E, 0xBE, 0xDF, 0x3C, 0xFA, 0x57, 0x2C, 0xDA, 0x36, 0xEE, 0x3F, 0xFC, + 0x5B, 0x15, 0x89, 0x71, 0x41, 0x00, 0x82, 0x86, 0x8E, 0x7F, 0x5D, 0x38, 0xF2, 0x47, 0xED, 0x58, + 0x13, 0xA4, 0xCA, 0xF7, 0x4D, 0xF9, 0x51, 0x01, 0x80, 0x63, 0x44, 0xEB, 0x54, 0x2A, 0xD6, 0x2E, + 0xBF, 0xDD, 0x19, 0x91, 0xA0, 0xA3, 0xA5, 0xA9, 0xB1, 0xE0, 0x42, 0x06, 0x8E, 0x7F, 0x5D, 0x19, + 0x91, 0xA0, 0xA3, 0xC4, 0x0A, 0x96, 0x8F, 0x7D, 0x78, 0x72, 0x47, 0x0C, 0x7B, 0x74, 0x6A, 0x56, + 0x2E, 0xDE, 0x1F, 0xBC, 0xFA, 0x57, 0x0D, 0x79, 0x51, 0x01, 0x61, 0x21, 0xA1, 0xC0, 0xE3, 0x25, + 0xA9, 0xB1, 0xC1, 0xE1, 0x40, 0x02, 0x67, 0x4C, 0x1A, 0x97, 0x8D, 0x98, 0x93, 0xA4, 0xAB, 0xD4, + 0x2A, 0xD6, 0x0F, 0x9C, 0x9B, 0xB4, 0xCB, 0x14, 0xAA, 0xB7, 0xCD, 0xF9, 0x51, 0x20, 0xA3, 0xC4, + 0xEB, 0x35, 0xC9, 0xF1, 0x60, 0x42, 0x06, 0x8E, 0x7F, 0x7C, 0x7A, 0x76, 0x6E, 0x3F, 0xFC, 0x7A, + 0x76, 0x6E, 0x5E, 0x3E, 0xFE, 0x7E, 0x5F, 0x3C, 0xDB, 0x15, 0x89, 0x71, 0x41, 0xE1, 0x21, 0xC0, + 0xE3, 0x44, 0xEB, 0x54, 0x2A, 0xB7, 0xCD, 0xF9, 0x70, 0x62, 0x27, 0xAD, 0xD8, 0x32, 0xC7, 0x0C, + 0x7B, 0x74, 0x4B, 0x14, 0xAA, 0xB7, 0xEC, 0x3B, 0xD5, 0x28, 0xD2, 0x07, 0x6D, 0x39, 0xD1, 0x20, + 0xC2, 0xE7, 0x4C, 0x1A, 0x97, 0x8D, 0x98, 0xB2, 0xC7, 0x0C, 0x59, 0x28, 0xF3, 0x9B +}; From 2ec268bd21c6bb8d6afbd4908fb0289b0d1c6bd2 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Sun, 24 Oct 2021 20:39:41 +0100 Subject: [PATCH 335/595] Begin to carve out platform/protocol API - Migrate keyboard_* calls (#14888) --- quantum/keyboard.c | 6 ++++++ quantum/main.c | 15 ++++++++++++++- tmk_core/protocol/chibios/chibios.c | 15 +++------------ tmk_core/protocol/lufa/lufa.c | 19 ++++--------------- tmk_core/protocol/vusb/protocol.c | 7 ------- 5 files changed, 27 insertions(+), 35 deletions(-) diff --git a/quantum/keyboard.c b/quantum/keyboard.c index f2a0889c12..f8e36994d2 100644 --- a/quantum/keyboard.c +++ b/quantum/keyboard.c @@ -335,6 +335,12 @@ void keyboard_init(void) { #ifdef DIP_SWITCH_ENABLE dip_switch_init(); #endif +#ifdef SLEEP_LED_ENABLE + sleep_led_init(); +#endif +#ifdef VIRTSER_ENABLE + virtser_init(); +#endif #if defined(DEBUG_MATRIX_SCAN_RATE) && defined(CONSOLE_ENABLE) debug_enable = true; diff --git a/quantum/main.c b/quantum/main.c index 2cbcd73d8f..a896a67c66 100644 --- a/quantum/main.c +++ b/quantum/main.c @@ -20,7 +20,18 @@ void platform_setup(void); void protocol_setup(void); void protocol_init(void); -void protocol_task(void); +void protocol_pre_task(void); +void protocol_post_task(void); + +// Bodge as refactoring vusb sucks.... +void protocol_task(void) __attribute__((weak)); +void protocol_task(void) { + protocol_pre_task(); + + keyboard_task(); + + protocol_post_task(); +} /** \brief Main * @@ -30,8 +41,10 @@ int main(void) __attribute__((weak)); int main(void) { platform_setup(); protocol_setup(); + keyboard_setup(); protocol_init(); + keyboard_init(); /* Main loop */ while (true) { diff --git a/tmk_core/protocol/chibios/chibios.c b/tmk_core/protocol/chibios/chibios.c index c860328c80..98b3305089 100644 --- a/tmk_core/protocol/chibios/chibios.c +++ b/tmk_core/protocol/chibios/chibios.c @@ -138,8 +138,6 @@ void protocol_setup(void) { // TESTING // chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); - - keyboard_setup(); } void protocol_init(void) { @@ -176,18 +174,10 @@ void protocol_init(void) { print("USB configured.\n"); - /* init TMK modules */ - keyboard_init(); host_set_driver(driver); - -#ifdef SLEEP_LED_ENABLE - sleep_led_init(); -#endif - - print("Keyboard start.\n"); } -void protocol_task(void) { +void protocol_pre_task(void) { usb_event_queue_task(); #if !defined(NO_USB_STARTUP_CHECK) @@ -210,8 +200,9 @@ void protocol_task(void) { # endif /* MOUSEKEY_ENABLE */ } #endif +} - keyboard_task(); +void protocol_post_task(void) { #ifdef CONSOLE_ENABLE console_task(); #endif diff --git a/tmk_core/protocol/lufa/lufa.c b/tmk_core/protocol/lufa/lufa.c index 753762358d..80781d2f37 100644 --- a/tmk_core/protocol/lufa/lufa.c +++ b/tmk_core/protocol/lufa/lufa.c @@ -1070,7 +1070,6 @@ void protocol_setup(void) { setup_mcu(); usb_device_state_init(); - keyboard_setup(); } void protocol_init(void) { @@ -1095,21 +1094,11 @@ void protocol_init(void) { #else USB_USBTask(); #endif - /* init modules */ - keyboard_init(); - host_set_driver(&lufa_driver); -#ifdef SLEEP_LED_ENABLE - sleep_led_init(); -#endif -#ifdef VIRTSER_ENABLE - virtser_init(); -#endif - - print("Keyboard start.\n"); + host_set_driver(&lufa_driver); } -void protocol_task(void) { +void protocol_pre_task(void) { #if !defined(NO_USB_STARTUP_CHECK) if (USB_DeviceState == DEVICE_STATE_Suspended) { print("[s]"); @@ -1133,9 +1122,9 @@ void protocol_task(void) { suspend_wakeup_init(); } #endif +} - keyboard_task(); - +void protocol_post_task(void) { #ifdef MIDI_ENABLE MIDI_Device_USBTask(&USB_MIDI_Interface); #endif diff --git a/tmk_core/protocol/vusb/protocol.c b/tmk_core/protocol/vusb/protocol.c index 89dc795b21..947c3383f1 100644 --- a/tmk_core/protocol/vusb/protocol.c +++ b/tmk_core/protocol/vusb/protocol.c @@ -111,22 +111,15 @@ void protocol_setup(void) { // clock prescaler clock_prescale_set(clock_div_1); #endif - keyboard_setup(); } void protocol_init(void) { setup_usb(); sei(); - keyboard_init(); - host_set_driver(vusb_driver()); wait_ms(50); - -#ifdef SLEEP_LED_ENABLE - sleep_led_init(); -#endif } void protocol_task(void) { From 0002acd4a319d4b692fd9665f14b60e4936dcd83 Mon Sep 17 00:00:00 2001 From: coliss86 Date: Mon, 25 Oct 2021 00:32:42 +0200 Subject: [PATCH 336/595] Fix Typo in documentation (#14942) --- docs/cli_tab_complete.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/cli_tab_complete.md b/docs/cli_tab_complete.md index 2217d4fd3b..200477624e 100644 --- a/docs/cli_tab_complete.md +++ b/docs/cli_tab_complete.md @@ -18,7 +18,7 @@ If you put `qmk_firmware` into another location you will need to adjust this pat If you want the tab completion available to all users of the system you can add a symlink to the `qmk_tab_complete.sh` script: - `ln -s ~/qmk_firmware/util/qmk_tab_complete.sh /etc/profile.d/qmk_tab_complete.sh` + ln -s ~/qmk_firmware/util/qmk_tab_complete.sh /etc/profile.d/qmk_tab_complete.sh ### System Wide Copy From 6e8eb2cf542d38332ef460d4f88eed281aed9188 Mon Sep 17 00:00:00 2001 From: Lucas Rodrigues Date: Mon, 25 Oct 2021 02:05:12 -0300 Subject: [PATCH 337/595] [Keyboard] temporary fix for SpiderIsland 78 (#14935) (#14941) --- keyboards/spiderisland/split78/config.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/keyboards/spiderisland/split78/config.h b/keyboards/spiderisland/split78/config.h index e15e5d193d..b67b3fafff 100644 --- a/keyboards/spiderisland/split78/config.h +++ b/keyboards/spiderisland/split78/config.h @@ -35,3 +35,5 @@ along with this program. If not, see . #define BACKLIGHT_BREATHING #define DEBOUNCE 50 + +#define I2C_START_RETRY_COUNT 1 From 028edfc2df5bc291773e8c7cc19ed38c9b9470dc Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Mon, 25 Oct 2021 21:14:46 -0700 Subject: [PATCH 338/595] Remove unused KEYBOARD_LOCK_ENABLE from rules (#14920) --- keyboards/dk60/rules.mk | 1 - keyboards/fjlabs/ad65/rules.mk | 1 - keyboards/fjlabs/bks65/rules.mk | 1 - keyboards/fjlabs/bks65solder/rules.mk | 1 - keyboards/fjlabs/bolsa65/rules.mk | 1 - keyboards/fjlabs/kf87/rules.mk | 1 - keyboards/fjlabs/ldk65/rules.mk | 1 - keyboards/fjlabs/ready100/rules.mk | 1 - keyboards/fjlabs/tf60ansi/rules.mk | 1 - keyboards/fjlabs/tf60v2/rules.mk | 1 - keyboards/fjlabs/tf65rgbv2/rules.mk | 4 ++-- keyboards/gh60/revc/keymaps/danbee/rules.mk | 1 - keyboards/gh60/revc/rules.mk | 1 - keyboards/handwired/arrow_pad/rules.mk | 1 - keyboards/handwired/retro_refit/rules.mk | 1 - keyboards/idb/idb_60/rules.mk | 1 - keyboards/jd40/rules.mk | 1 - keyboards/kc60/keymaps/stanleylai/rules.mk | 2 -- keyboards/kc60/keymaps/wigguno/rules.mk | 2 -- keyboards/kc60/rules.mk | 1 - keyboards/keybee/keybee65/rules.mk | 1 - keyboards/lucid/alexa/rules.mk | 1 - keyboards/lucid/kbd8x_hs/rules.mk | 1 - keyboards/lucid/phantom_hs/rules.mk | 1 - keyboards/lucid/phantom_solder/rules.mk | 1 - keyboards/ok60/rules.mk | 1 - keyboards/thevankeyboards/minivan/keymaps/danbee/rules.mk | 1 - keyboards/undead60m/rules.mk | 1 - keyboards/wolf/ts60/rules.mk | 4 ++-- show_options.mk | 1 - users/bcat/rules.mk | 1 - 31 files changed, 4 insertions(+), 35 deletions(-) diff --git a/keyboards/dk60/rules.mk b/keyboards/dk60/rules.mk index c34ea2677e..c3c93b823c 100644 --- a/keyboards/dk60/rules.mk +++ b/keyboards/dk60/rules.mk @@ -19,5 +19,4 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -KEYBOARD_LOCK_ENABLE = yes UNICODE_ENABLE = yes diff --git a/keyboards/fjlabs/ad65/rules.mk b/keyboards/fjlabs/ad65/rules.mk index 58e569b739..4f87390759 100644 --- a/keyboards/fjlabs/ad65/rules.mk +++ b/keyboards/fjlabs/ad65/rules.mk @@ -22,4 +22,3 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -KEYBOARD_LOCK_ENABLE = yes diff --git a/keyboards/fjlabs/bks65/rules.mk b/keyboards/fjlabs/bks65/rules.mk index 37fccd0e9b..3dc41b847c 100644 --- a/keyboards/fjlabs/bks65/rules.mk +++ b/keyboards/fjlabs/bks65/rules.mk @@ -22,6 +22,5 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -KEYBOARD_LOCK_ENABLE = yes LAYOUTS = 65_ansi diff --git a/keyboards/fjlabs/bks65solder/rules.mk b/keyboards/fjlabs/bks65solder/rules.mk index 37fccd0e9b..3dc41b847c 100644 --- a/keyboards/fjlabs/bks65solder/rules.mk +++ b/keyboards/fjlabs/bks65solder/rules.mk @@ -22,6 +22,5 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -KEYBOARD_LOCK_ENABLE = yes LAYOUTS = 65_ansi diff --git a/keyboards/fjlabs/bolsa65/rules.mk b/keyboards/fjlabs/bolsa65/rules.mk index 956c2f9ce0..cc8bfbe210 100644 --- a/keyboards/fjlabs/bolsa65/rules.mk +++ b/keyboards/fjlabs/bolsa65/rules.mk @@ -22,6 +22,5 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -KEYBOARD_LOCK_ENABLE = yes LAYOUTS = 65_ansi_blocker diff --git a/keyboards/fjlabs/kf87/rules.mk b/keyboards/fjlabs/kf87/rules.mk index e8e606b5b1..ed2c3a4fb5 100644 --- a/keyboards/fjlabs/kf87/rules.mk +++ b/keyboards/fjlabs/kf87/rules.mk @@ -22,4 +22,3 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -KEYBOARD_LOCK_ENABLE = yes diff --git a/keyboards/fjlabs/ldk65/rules.mk b/keyboards/fjlabs/ldk65/rules.mk index 2bee6a4b91..dbfecbc773 100644 --- a/keyboards/fjlabs/ldk65/rules.mk +++ b/keyboards/fjlabs/ldk65/rules.mk @@ -22,6 +22,5 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -KEYBOARD_LOCK_ENABLE = yes LAYOUTS = 65_ansi diff --git a/keyboards/fjlabs/ready100/rules.mk b/keyboards/fjlabs/ready100/rules.mk index fb8e1bc71e..029a96b33d 100644 --- a/keyboards/fjlabs/ready100/rules.mk +++ b/keyboards/fjlabs/ready100/rules.mk @@ -22,6 +22,5 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -KEYBOARD_LOCK_ENABLE = yes LAYOUTS = 64_ansi diff --git a/keyboards/fjlabs/tf60ansi/rules.mk b/keyboards/fjlabs/tf60ansi/rules.mk index 6e16f42b85..dbd20b9e1e 100644 --- a/keyboards/fjlabs/tf60ansi/rules.mk +++ b/keyboards/fjlabs/tf60ansi/rules.mk @@ -22,6 +22,5 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -KEYBOARD_LOCK_ENABLE = yes LAYOUTS = 60_ansi diff --git a/keyboards/fjlabs/tf60v2/rules.mk b/keyboards/fjlabs/tf60v2/rules.mk index bf43d35264..db42667cfc 100644 --- a/keyboards/fjlabs/tf60v2/rules.mk +++ b/keyboards/fjlabs/tf60v2/rules.mk @@ -22,6 +22,5 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -KEYBOARD_LOCK_ENABLE = yes LAYOUTS = 60_ansi_arrow diff --git a/keyboards/fjlabs/tf65rgbv2/rules.mk b/keyboards/fjlabs/tf65rgbv2/rules.mk index 1ec4ee2ac2..4e9cde50cc 100644 --- a/keyboards/fjlabs/tf65rgbv2/rules.mk +++ b/keyboards/fjlabs/tf65rgbv2/rules.mk @@ -22,6 +22,6 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -KEYBOARD_LOCK_ENABLE = yes -LAYOUTS = 65_ansi \ No newline at end of file + +LAYOUTS = 65_ansi diff --git a/keyboards/gh60/revc/keymaps/danbee/rules.mk b/keyboards/gh60/revc/keymaps/danbee/rules.mk index b1434f75c8..0a5b666e85 100644 --- a/keyboards/gh60/revc/keymaps/danbee/rules.mk +++ b/keyboards/gh60/revc/keymaps/danbee/rules.mk @@ -1,2 +1 @@ MOUSEKEY_ENABLE = no -KEYBOARD_LOCK_ENABLE = yes diff --git a/keyboards/gh60/revc/rules.mk b/keyboards/gh60/revc/rules.mk index 30057a4571..da3aaf3237 100644 --- a/keyboards/gh60/revc/rules.mk +++ b/keyboards/gh60/revc/rules.mk @@ -12,7 +12,6 @@ MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control # CONSOLE_ENABLE = yes # Console for debug # COMMAND_ENABLE = yes # Commands for debug and configuration -KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE # SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work diff --git a/keyboards/handwired/arrow_pad/rules.mk b/keyboards/handwired/arrow_pad/rules.mk index e58bcc03a4..d6180989bf 100644 --- a/keyboards/handwired/arrow_pad/rules.mk +++ b/keyboards/handwired/arrow_pad/rules.mk @@ -12,7 +12,6 @@ MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration -KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work diff --git a/keyboards/handwired/retro_refit/rules.mk b/keyboards/handwired/retro_refit/rules.mk index a37162eff8..d06879ab13 100644 --- a/keyboards/handwired/retro_refit/rules.mk +++ b/keyboards/handwired/retro_refit/rules.mk @@ -12,7 +12,6 @@ MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration -KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE # SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work diff --git a/keyboards/idb/idb_60/rules.mk b/keyboards/idb/idb_60/rules.mk index 0ec5c6a831..a2363cbb5e 100644 --- a/keyboards/idb/idb_60/rules.mk +++ b/keyboards/idb/idb_60/rules.mk @@ -11,7 +11,6 @@ MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration -KEYBOARD_LOCK_ENABLE = no # Allow locking of keyboard via magic key SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality diff --git a/keyboards/jd40/rules.mk b/keyboards/jd40/rules.mk index 358097e80d..f344e4fc77 100644 --- a/keyboards/jd40/rules.mk +++ b/keyboards/jd40/rules.mk @@ -12,7 +12,6 @@ MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control # CONSOLE_ENABLE = yes # Console for debug # COMMAND_ENABLE = yes # Commands for debug and configuration -KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE # SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work diff --git a/keyboards/kc60/keymaps/stanleylai/rules.mk b/keyboards/kc60/keymaps/stanleylai/rules.mk index 39223abfa6..3951663c7c 100644 --- a/keyboards/kc60/keymaps/stanleylai/rules.mk +++ b/keyboards/kc60/keymaps/stanleylai/rules.mk @@ -8,7 +8,6 @@ MOUSEKEY_ENABLE = no # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = no # Console for debug(+400) COMMAND_ENABLE = no # Commands for debug and configuration -KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable WS2812 underglow RGB strip MIDI_ENABLE = no # MIDI controls @@ -19,4 +18,3 @@ AUDIO_ENABLE = no # Audio output on port C6 SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover - diff --git a/keyboards/kc60/keymaps/wigguno/rules.mk b/keyboards/kc60/keymaps/wigguno/rules.mk index 43fcc254d1..97ab961739 100644 --- a/keyboards/kc60/keymaps/wigguno/rules.mk +++ b/keyboards/kc60/keymaps/wigguno/rules.mk @@ -8,7 +8,6 @@ MOUSEKEY_ENABLE = no # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = no # Console for debug(+400) COMMAND_ENABLE = no # Commands for debug and configuration -KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work @@ -18,4 +17,3 @@ MIDI_ENABLE = no # MIDI controls UNICODE_ENABLE = no # Unicode BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID AUDIO_ENABLE = no # Audio output on port C6 - diff --git a/keyboards/kc60/rules.mk b/keyboards/kc60/rules.mk index 1f63f24f15..a00cd5e808 100644 --- a/keyboards/kc60/rules.mk +++ b/keyboards/kc60/rules.mk @@ -19,6 +19,5 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key LAYOUTS = 60_ansi diff --git a/keyboards/keybee/keybee65/rules.mk b/keyboards/keybee/keybee65/rules.mk index 17b1906d46..fb898d093f 100644 --- a/keyboards/keybee/keybee65/rules.mk +++ b/keyboards/keybee/keybee65/rules.mk @@ -19,7 +19,6 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -KEYBOARD_LOCK_ENABLE = yes ENCODER_ENABLE = no RGB_MATRIX_ENABLE = yes RGB_MATRIX_DRIVER = WS2812 diff --git a/keyboards/lucid/alexa/rules.mk b/keyboards/lucid/alexa/rules.mk index 16bcdf2cfc..1d16100050 100644 --- a/keyboards/lucid/alexa/rules.mk +++ b/keyboards/lucid/alexa/rules.mk @@ -22,6 +22,5 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -KEYBOARD_LOCK_ENABLE = yes LAYOUTS = 65_ansi_blocker 65_ansi_blocker_split_bs diff --git a/keyboards/lucid/kbd8x_hs/rules.mk b/keyboards/lucid/kbd8x_hs/rules.mk index ca14808aa4..916eb9fbbd 100644 --- a/keyboards/lucid/kbd8x_hs/rules.mk +++ b/keyboards/lucid/kbd8x_hs/rules.mk @@ -22,4 +22,3 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -KEYBOARD_LOCK_ENABLE = yes diff --git a/keyboards/lucid/phantom_hs/rules.mk b/keyboards/lucid/phantom_hs/rules.mk index b1d63c6822..a49a628735 100644 --- a/keyboards/lucid/phantom_hs/rules.mk +++ b/keyboards/lucid/phantom_hs/rules.mk @@ -22,6 +22,5 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -KEYBOARD_LOCK_ENABLE = yes LAYOUTS = 65_ansi_blocker diff --git a/keyboards/lucid/phantom_solder/rules.mk b/keyboards/lucid/phantom_solder/rules.mk index 58e569b739..4f87390759 100644 --- a/keyboards/lucid/phantom_solder/rules.mk +++ b/keyboards/lucid/phantom_solder/rules.mk @@ -22,4 +22,3 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -KEYBOARD_LOCK_ENABLE = yes diff --git a/keyboards/ok60/rules.mk b/keyboards/ok60/rules.mk index e1e858b349..b896727009 100644 --- a/keyboards/ok60/rules.mk +++ b/keyboards/ok60/rules.mk @@ -12,7 +12,6 @@ MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control # CONSOLE_ENABLE = yes # Console for debug # COMMAND_ENABLE = yes # Commands for debug and configuration -KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable the RGB backlight diff --git a/keyboards/thevankeyboards/minivan/keymaps/danbee/rules.mk b/keyboards/thevankeyboards/minivan/keymaps/danbee/rules.mk index b1434f75c8..0a5b666e85 100644 --- a/keyboards/thevankeyboards/minivan/keymaps/danbee/rules.mk +++ b/keyboards/thevankeyboards/minivan/keymaps/danbee/rules.mk @@ -1,2 +1 @@ MOUSEKEY_ENABLE = no -KEYBOARD_LOCK_ENABLE = yes diff --git a/keyboards/undead60m/rules.mk b/keyboards/undead60m/rules.mk index b88f8c161d..1bc6b6534e 100644 --- a/keyboards/undead60m/rules.mk +++ b/keyboards/undead60m/rules.mk @@ -19,6 +19,5 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -KEYBOARD_LOCK_ENABLE = yes ENCODER_ENABLE = yes LTO_ENABLE = yes diff --git a/keyboards/wolf/ts60/rules.mk b/keyboards/wolf/ts60/rules.mk index bd19f3c36e..8edf0f7658 100644 --- a/keyboards/wolf/ts60/rules.mk +++ b/keyboards/wolf/ts60/rules.mk @@ -22,6 +22,6 @@ NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output -KEYBOARD_LOCK_ENABLE = yes -LAYOUTS = 60_ansi \ No newline at end of file + +LAYOUTS = 60_ansi diff --git a/show_options.mk b/show_options.mk index b17d8c7d9d..60ae850cf8 100644 --- a/show_options.mk +++ b/show_options.mk @@ -65,7 +65,6 @@ OTHER_OPTION_NAMES = \ HAPTIC_ENABLE \ HHKB_RN42_ENABLE \ ISSI_ENABLE \ - KEYBOARD_LOCK_ENABLE \ KEYLOGGER_ENABLE \ LCD_BACKLIGHT_ENABLE \ MACROS_ENABLED \ diff --git a/users/bcat/rules.mk b/users/bcat/rules.mk index 6d748875a4..651ee96fe0 100644 --- a/users/bcat/rules.mk +++ b/users/bcat/rules.mk @@ -29,7 +29,6 @@ SLEEP_LED_ENABLE = no # Disable other unused options on all keyboards. AUTO_SHIFT_ENABLE = no COMBO_ENABLE = no -KEYBOARD_LOCK_ENABLE = no KEY_LOCK_ENABLE = no LEADER_ENABLE = no SWAP_HANDS_ENABLE = no From d595dce89f431bd28728b814c92481ed101de8a7 Mon Sep 17 00:00:00 2001 From: GG <72414103+spbgzh@users.noreply.github.com> Date: Wed, 27 Oct 2021 02:03:52 +0300 Subject: [PATCH 339/595] [Keyboard] Add zoom65 (#14926) --- keyboards/meletrix/zoom65/config.h | 51 ++ keyboards/meletrix/zoom65/info.json | 467 ++++++++++++++++++ .../meletrix/zoom65/keymaps/65_ansi/keymap.c | 34 ++ .../meletrix/zoom65/keymaps/65_ansi/readme.md | 1 + .../meletrix/zoom65/keymaps/65_iso/keymap.c | 34 ++ .../meletrix/zoom65/keymaps/65_iso/readme.md | 1 + .../zoom65/keymaps/65_split_bs/keymap.c | 34 ++ .../zoom65/keymaps/65_split_bs/readme.md | 1 + .../zoom65/keymaps/65_split_lshift/keymap.c | 34 ++ .../zoom65/keymaps/65_split_lshift/readme.md | 1 + .../zoom65/keymaps/65_split_space/keymap.c | 34 ++ .../zoom65/keymaps/65_split_space/readme.md | 1 + .../meletrix/zoom65/keymaps/default/keymap.c | 34 ++ .../meletrix/zoom65/keymaps/default/readme.md | 1 + .../meletrix/zoom65/keymaps/via/keymap.c | 48 ++ .../meletrix/zoom65/keymaps/via/readme.md | 1 + .../meletrix/zoom65/keymaps/via/rules.mk | 2 + keyboards/meletrix/zoom65/readme.md | 26 + keyboards/meletrix/zoom65/rules.mk | 24 + keyboards/meletrix/zoom65/zoom65.c | 66 +++ keyboards/meletrix/zoom65/zoom65.h | 187 +++++++ 21 files changed, 1082 insertions(+) create mode 100644 keyboards/meletrix/zoom65/config.h create mode 100644 keyboards/meletrix/zoom65/info.json create mode 100644 keyboards/meletrix/zoom65/keymaps/65_ansi/keymap.c create mode 100644 keyboards/meletrix/zoom65/keymaps/65_ansi/readme.md create mode 100644 keyboards/meletrix/zoom65/keymaps/65_iso/keymap.c create mode 100644 keyboards/meletrix/zoom65/keymaps/65_iso/readme.md create mode 100644 keyboards/meletrix/zoom65/keymaps/65_split_bs/keymap.c create mode 100644 keyboards/meletrix/zoom65/keymaps/65_split_bs/readme.md create mode 100644 keyboards/meletrix/zoom65/keymaps/65_split_lshift/keymap.c create mode 100644 keyboards/meletrix/zoom65/keymaps/65_split_lshift/readme.md create mode 100644 keyboards/meletrix/zoom65/keymaps/65_split_space/keymap.c create mode 100644 keyboards/meletrix/zoom65/keymaps/65_split_space/readme.md create mode 100644 keyboards/meletrix/zoom65/keymaps/default/keymap.c create mode 100644 keyboards/meletrix/zoom65/keymaps/default/readme.md create mode 100644 keyboards/meletrix/zoom65/keymaps/via/keymap.c create mode 100644 keyboards/meletrix/zoom65/keymaps/via/readme.md create mode 100644 keyboards/meletrix/zoom65/keymaps/via/rules.mk create mode 100644 keyboards/meletrix/zoom65/readme.md create mode 100644 keyboards/meletrix/zoom65/rules.mk create mode 100644 keyboards/meletrix/zoom65/zoom65.c create mode 100644 keyboards/meletrix/zoom65/zoom65.h diff --git a/keyboards/meletrix/zoom65/config.h b/keyboards/meletrix/zoom65/config.h new file mode 100644 index 0000000000..4eb85aeb49 --- /dev/null +++ b/keyboards/meletrix/zoom65/config.h @@ -0,0 +1,51 @@ +/* Copyright 2021 meletrix + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x806B +#define PRODUCT_ID 0x0004 +#define DEVICE_VER 0x0001 +#define MANUFACTURER meletrix +#define PRODUCT zoom65 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +#define MATRIX_ROW_PINS { F0, E6, D5, F1, F4 } +#define MATRIX_COL_PINS { C7, D3, D2, D1, D0, B7, B3, B2, C6, B6, B5, B4, D7, D6, D4 } + +#define DIODE_DIRECTION COL2ROW + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Enable encoder */ +#define ENCODERS_PAD_A { B1 } +#define ENCODERS_PAD_B { B0 } + +#define ENCODERS 1 +// Note: array is { col, row ) +#define ENCODERS_CW_KEY { { 5, 4 } } +#define ENCODERS_CCW_KEY { { 3, 4 } } + +#define LED_CAPS_LOCK_PIN F7 +#define LED_PIN_ON_STATE 0 + diff --git a/keyboards/meletrix/zoom65/info.json b/keyboards/meletrix/zoom65/info.json new file mode 100644 index 0000000000..49535c106e --- /dev/null +++ b/keyboards/meletrix/zoom65/info.json @@ -0,0 +1,467 @@ +{ + "keyboard_name": "zoom65", + "url": "https://zoom65.com/", + "maintainer": "qmk", + "layouts": { + "LAYOUT_all": { + "layout": [ + { "label": "Esc", "x": 0, "y": 0 }, + { "label": "1", "x": 1, "y": 0 }, + { "label": "2", "x": 2, "y": 0 }, + { "label": "3", "x": 3, "y": 0 }, + { "label": "4", "x": 4, "y": 0 }, + { "label": "5", "x": 5, "y": 0 }, + { "label": "6", "x": 6, "y": 0 }, + { "label": "7", "x": 7, "y": 0 }, + { "label": "8", "x": 8, "y": 0 }, + { "label": "9", "x": 9, "y": 0 }, + { "label": "0", "x": 10, "y": 0 }, + { "label": "-", "x": 11, "y": 0 }, + { "label": "=", "x": 12, "y": 0 }, + { "label": "Backspace", "x": 13, "y": 0 }, + { "label": "EncoderRotateL", "x": 15, "y": 0, "w": 0.5 }, + { "label": "EncoderClick", "x": 15.5, "y": 0 }, + { "label": "EncoderRotateR", "x": 16.5, "y": 0, "w": 0.5 }, + + { "label": "Tab", "x": 0, "y": 1, "w": 1.5 }, + { "label": "Q", "x": 1.5, "y": 1 }, + { "label": "W", "x": 2.5, "y": 1 }, + { "label": "E", "x": 3.5, "y": 1 }, + { "label": "R", "x": 4.5, "y": 1 }, + { "label": "T", "x": 5.5, "y": 1 }, + { "label": "Y", "x": 6.5, "y": 1 }, + { "label": "U", "x": 7.5, "y": 1 }, + { "label": "I", "x": 8.5, "y": 1 }, + { "label": "O", "x": 9.5, "y": 1 }, + { "label": "P", "x": 10.5, "y": 1 }, + { "label": "[", "x": 11.5, "y": 1 }, + { "label": "]", "x": 12.5, "y": 1 }, + { "label": "\\", "x": 13.5, "y": 1, "w": 1.5 }, + { "label": "Delete", "x": 15, "y": 1 }, + + { "label": "Caps Lock", "x": 0, "y": 2, "w": 1.75 }, + { "label": "A", "x": 1.75, "y": 2 }, + { "label": "S", "x": 2.75, "y": 2 }, + { "label": "D", "x": 3.75, "y": 2 }, + { "label": "F", "x": 4.75, "y": 2 }, + { "label": "G", "x": 5.75, "y": 2 }, + { "label": "H", "x": 6.75, "y": 2 }, + { "label": "J", "x": 7.75, "y": 2 }, + { "label": "K", "x": 8.75, "y": 2 }, + { "label": "L", "x": 9.75, "y": 2 }, + { "label": ";", "x": 10.75, "y": 2 }, + { "label": "'", "x": 11.75, "y": 2 }, + { "label": "Enter", "x": 12.75, "y": 2, "w": 2.25 }, + { "label": "Backspace", "x": 14, "y": 0 }, + { "label": "PageUp", "x": 15, "y": 2 }, + + { "label": "Shift1", "x": 0, "y": 3, "w": 1.25 }, + { "label": "Shift2", "x": 1.25, "y": 3 }, + { "label": "Z", "x": 2.25, "y": 3 }, + { "label": "X", "x": 3.25, "y": 3 }, + { "label": "C", "x": 4.25, "y": 3 }, + { "label": "V", "x": 5.25, "y": 3 }, + { "label": "B", "x": 6.25, "y": 3 }, + { "label": "N", "x": 7.25, "y": 3 }, + { "label": "M", "x": 8.25, "y": 3 }, + { "label": ",", "x": 9.25, "y": 3 }, + { "label": ".", "x": 10.25, "y": 3 }, + { "label": "/", "x": 11.25, "y": 3 }, + { "label": "Shift", "x": 12.25, "y": 3, "w": 1.75 }, + { "label": "\u2191", "x": 14, "y": 3 }, + { "label": "End", "x": 15, "y": 3 }, + + { "label": "Ctrl", "x": 0, "y": 4, "w": 1.25 }, + { "label": "Win", "x": 1.25, "y": 4, "w": 1.25 }, + { "label": "Alt", "x": 2.5, "y": 4, "w": 1.25 }, + { "x": 3.75, "y": 4, "w": 2.25 }, + { "x": 6, "y": 4, "w": 1.25 }, + { "x": 7.25, "y": 4, "w": 2.75 }, + { "label": "Alt", "x": 10, "y": 4, "w": 1.25 }, + { "label": "Fn", "x": 11.25, "y": 4, "w": 1.25 }, + { "label": "\u2190", "x": 13, "y": 4 }, + { "label": "\u2193", "x": 14, "y": 4 }, + { "label": "\u2192", "x": 15, "y": 4 } + ] + }, + "LAYOUT_65_ansi_blocker": { + "layout": [ + { "label": "Esc", "x": 0, "y": 0 }, + { "label": "1", "x": 1, "y": 0 }, + { "label": "2", "x": 2, "y": 0 }, + { "label": "3", "x": 3, "y": 0 }, + { "label": "4", "x": 4, "y": 0 }, + { "label": "5", "x": 5, "y": 0 }, + { "label": "6", "x": 6, "y": 0 }, + { "label": "7", "x": 7, "y": 0 }, + { "label": "8", "x": 8, "y": 0 }, + { "label": "9", "x": 9, "y": 0 }, + { "label": "0", "x": 10, "y": 0 }, + { "label": "-", "x": 11, "y": 0 }, + { "label": "=", "x": 12, "y": 0 }, + { "label": "Backspace", "x": 13, "y": 0, "w": 2 }, + { "label": "Encode", "x": 15, "y": 0 }, + + { "label": "Tab", "x": 0, "y": 1, "w": 1.5 }, + { "label": "Q", "x": 1.5, "y": 1 }, + { "label": "W", "x": 2.5, "y": 1 }, + { "label": "E", "x": 3.5, "y": 1 }, + { "label": "R", "x": 4.5, "y": 1 }, + { "label": "T", "x": 5.5, "y": 1 }, + { "label": "Y", "x": 6.5, "y": 1 }, + { "label": "U", "x": 7.5, "y": 1 }, + { "label": "I", "x": 8.5, "y": 1 }, + { "label": "O", "x": 9.5, "y": 1 }, + { "label": "P", "x": 10.5, "y": 1 }, + { "label": "[", "x": 11.5, "y": 1 }, + { "label": "]", "x": 12.5, "y": 1 }, + { "label": "\\", "x": 13.5, "y": 1, "w": 1.5 }, + { "label": "Delete", "x": 15, "y": 1 }, + + { "label": "Caps Lock", "x": 0, "y": 2, "w": 1.75 }, + { "label": "A", "x": 1.75, "y": 2 }, + { "label": "S", "x": 2.75, "y": 2 }, + { "label": "D", "x": 3.75, "y": 2 }, + { "label": "F", "x": 4.75, "y": 2 }, + { "label": "G", "x": 5.75, "y": 2 }, + { "label": "H", "x": 6.75, "y": 2 }, + { "label": "J", "x": 7.75, "y": 2 }, + { "label": "K", "x": 8.75, "y": 2 }, + { "label": "L", "x": 9.75, "y": 2 }, + { "label": ";", "x": 10.75, "y": 2 }, + { "label": "'", "x": 11.75, "y": 2 }, + { "label": "Enter", "x": 12.75, "y": 2, "w": 2.25 }, + { "label": "PageUp", "x": 15, "y": 2 }, + + { "label": "Shift", "x": 0, "y": 3, "w": 2.25 }, + { "label": "Z", "x": 2.25, "y": 3 }, + { "label": "X", "x": 3.25, "y": 3 }, + { "label": "C", "x": 4.25, "y": 3 }, + { "label": "V", "x": 5.25, "y": 3 }, + { "label": "B", "x": 6.25, "y": 3 }, + { "label": "N", "x": 7.25, "y": 3 }, + { "label": "M", "x": 8.25, "y": 3 }, + { "label": ",", "x": 9.25, "y": 3 }, + { "label": ".", "x": 10.25, "y": 3 }, + { "label": "/", "x": 11.25, "y": 3 }, + { "label": "Shift", "x": 12.25, "y": 3, "w": 1.75 }, + { "label": "\u2191", "x": 14, "y": 3 }, + { "label": "End", "x": 15, "y": 3 }, + + { "label": "Ctrl", "x": 0, "y": 4, "w": 1.25 }, + { "label": "Win", "x": 1.25, "y": 4, "w": 1.25 }, + { "label": "Alt", "x": 2.5, "y": 4, "w": 1.25 }, + { "x": 3.75, "y": 4, "w": 6.25 }, + { "label": "Alt", "x": 10, "y": 4, "w": 1.25 }, + { "label": "Fn", "x": 11.25, "y": 4, "w": 1.25 }, + { "label": "\u2190", "x": 13, "y": 4 }, + { "label": "\u2193", "x": 14, "y": 4 }, + { "label": "\u2192", "x": 15, "y": 4 } + ] + }, + "LAYOUT_65_iso_blocker": { + "layout": [ + { "label": "Esc", "x": 0, "y": 0 }, + { "label": "1", "x": 1, "y": 0 }, + { "label": "2", "x": 2, "y": 0 }, + { "label": "3", "x": 3, "y": 0 }, + { "label": "4", "x": 4, "y": 0 }, + { "label": "5", "x": 5, "y": 0 }, + { "label": "6", "x": 6, "y": 0 }, + { "label": "7", "x": 7, "y": 0 }, + { "label": "8", "x": 8, "y": 0 }, + { "label": "9", "x": 9, "y": 0 }, + { "label": "0", "x": 10, "y": 0 }, + { "label": "-", "x": 11, "y": 0 }, + { "label": "=", "x": 12, "y": 0 }, + { "label": "Backspace", "x": 13, "y": 0, "w": 2 }, + { "label": "Encode", "x": 15, "y": 0 }, + + { "label": "Tab", "x": 0, "y": 1, "w": 1.5 }, + { "label": "Q", "x": 1.5, "y": 1 }, + { "label": "W", "x": 2.5, "y": 1 }, + { "label": "E", "x": 3.5, "y": 1 }, + { "label": "R", "x": 4.5, "y": 1 }, + { "label": "T", "x": 5.5, "y": 1 }, + { "label": "Y", "x": 6.5, "y": 1 }, + { "label": "U", "x": 7.5, "y": 1 }, + { "label": "I", "x": 8.5, "y": 1 }, + { "label": "O", "x": 9.5, "y": 1 }, + { "label": "P", "x": 10.5, "y": 1 }, + { "label": "[", "x": 11.5, "y": 1 }, + { "label": "]", "x": 12.5, "y": 1 }, + { "label": "ISO", "x": 13.75, "y": 1, "w": 1.25, "h": 2 }, + { "label": "Delete", "x": 15, "y": 1 }, + + { "label": "Caps Lock", "x": 0, "y": 2, "w": 1.75 }, + { "label": "A", "x": 1.75, "y": 2 }, + { "label": "S", "x": 2.75, "y": 2 }, + { "label": "D", "x": 3.75, "y": 2 }, + { "label": "F", "x": 4.75, "y": 2 }, + { "label": "G", "x": 5.75, "y": 2 }, + { "label": "H", "x": 6.75, "y": 2 }, + { "label": "J", "x": 7.75, "y": 2 }, + { "label": "K", "x": 8.75, "y": 2 }, + { "label": "L", "x": 9.75, "y": 2 }, + { "label": ";", "x": 10.75, "y": 2 }, + { "label": "'", "x": 11.75, "y": 2 }, + { "label": "\\", "x": 12.75, "y": 2 }, + { "label": "PageUp", "x": 15, "y": 2 }, + + { "label": "Shift", "x": 0, "y": 3, "w": 2.25 }, + { "label": "Z", "x": 2.25, "y": 3 }, + { "label": "X", "x": 3.25, "y": 3 }, + { "label": "C", "x": 4.25, "y": 3 }, + { "label": "V", "x": 5.25, "y": 3 }, + { "label": "B", "x": 6.25, "y": 3 }, + { "label": "N", "x": 7.25, "y": 3 }, + { "label": "M", "x": 8.25, "y": 3 }, + { "label": ",", "x": 9.25, "y": 3 }, + { "label": ".", "x": 10.25, "y": 3 }, + { "label": "/", "x": 11.25, "y": 3 }, + { "label": "Shift", "x": 12.25, "y": 3, "w": 1.75 }, + { "label": "\u2191", "x": 14, "y": 3 }, + { "label": "End", "x": 15, "y": 3 }, + + { "label": "Ctrl", "x": 0, "y": 4, "w": 1.25 }, + { "label": "Win", "x": 1.25, "y": 4, "w": 1.25 }, + { "label": "Alt", "x": 2.5, "y": 4, "w": 1.25 }, + { "x": 3.75, "y": 4, "w": 6.25 }, + { "label": "Alt", "x": 10, "y": 4, "w": 1.25 }, + { "label": "Fn", "x": 11.25, "y": 4, "w": 1.25 }, + { "label": "\u2190", "x": 13, "y": 4 }, + { "label": "\u2193", "x": 14, "y": 4 }, + { "label": "\u2192", "x": 15, "y": 4 } + ] + }, + "LAYOUT_65_ansi_split_bs": { + "layout": [ + { "label": "Esc", "x": 0, "y": 0 }, + { "label": "1", "x": 1, "y": 0 }, + { "label": "2", "x": 2, "y": 0 }, + { "label": "3", "x": 3, "y": 0 }, + { "label": "4", "x": 4, "y": 0 }, + { "label": "5", "x": 5, "y": 0 }, + { "label": "6", "x": 6, "y": 0 }, + { "label": "7", "x": 7, "y": 0 }, + { "label": "8", "x": 8, "y": 0 }, + { "label": "9", "x": 9, "y": 0 }, + { "label": "0", "x": 10, "y": 0 }, + { "label": "-", "x": 11, "y": 0 }, + { "label": "=", "x": 12, "y": 0 }, + { "label": "Backspace", "x": 13, "y": 0 }, + { "label": "Encode", "x": 15, "y": 0 }, + + { "label": "Tab", "x": 0, "y": 1, "w": 1.5 }, + { "label": "Q", "x": 1.5, "y": 1 }, + { "label": "W", "x": 2.5, "y": 1 }, + { "label": "E", "x": 3.5, "y": 1 }, + { "label": "R", "x": 4.5, "y": 1 }, + { "label": "T", "x": 5.5, "y": 1 }, + { "label": "Y", "x": 6.5, "y": 1 }, + { "label": "U", "x": 7.5, "y": 1 }, + { "label": "I", "x": 8.5, "y": 1 }, + { "label": "O", "x": 9.5, "y": 1 }, + { "label": "P", "x": 10.5, "y": 1 }, + { "label": "[", "x": 11.5, "y": 1 }, + { "label": "]", "x": 12.5, "y": 1 }, + { "label": "\\", "x": 13.5, "y": 1, "w": 1.5 }, + { "label": "Delete", "x": 15, "y": 1 }, + + { "label": "Caps Lock", "x": 0, "y": 2, "w": 1.75 }, + { "label": "A", "x": 1.75, "y": 2 }, + { "label": "S", "x": 2.75, "y": 2 }, + { "label": "D", "x": 3.75, "y": 2 }, + { "label": "F", "x": 4.75, "y": 2 }, + { "label": "G", "x": 5.75, "y": 2 }, + { "label": "H", "x": 6.75, "y": 2 }, + { "label": "J", "x": 7.75, "y": 2 }, + { "label": "K", "x": 8.75, "y": 2 }, + { "label": "L", "x": 9.75, "y": 2 }, + { "label": ";", "x": 10.75, "y": 2 }, + { "label": "'", "x": 11.75, "y": 2 }, + { "label": "Enter", "x": 12.75, "y": 2, "w": 2.25 }, + { "label": "Backspace", "x": 14, "y": 0 }, + { "label": "PageUp", "x": 15, "y": 2 }, + + { "label": "Shift", "x": 0, "y": 3, "w": 2.25 }, + { "label": "Z", "x": 2.25, "y": 3 }, + { "label": "X", "x": 3.25, "y": 3 }, + { "label": "C", "x": 4.25, "y": 3 }, + { "label": "V", "x": 5.25, "y": 3 }, + { "label": "B", "x": 6.25, "y": 3 }, + { "label": "N", "x": 7.25, "y": 3 }, + { "label": "M", "x": 8.25, "y": 3 }, + { "label": ",", "x": 9.25, "y": 3 }, + { "label": ".", "x": 10.25, "y": 3 }, + { "label": "/", "x": 11.25, "y": 3 }, + { "label": "Shift", "x": 12.25, "y": 3, "w": 1.75 }, + { "label": "\u2191", "x": 14, "y": 3 }, + { "label": "End", "x": 15, "y": 3 }, + + { "label": "Ctrl", "x": 0, "y": 4, "w": 1.25 }, + { "label": "Win", "x": 1.25, "y": 4, "w": 1.25 }, + { "label": "Alt", "x": 2.5, "y": 4, "w": 1.25 }, + { "x": 3.75, "y": 4, "w": 6.25 }, + { "label": "Alt", "x": 10, "y": 4, "w": 1.25 }, + { "label": "Fn", "x": 11.25, "y": 4, "w": 1.25 }, + { "label": "\u2190", "x": 13, "y": 4 }, + { "label": "\u2193", "x": 14, "y": 4 }, + { "label": "\u2192", "x": 15, "y": 4 } + ] + }, + "LAYOUT_65_ansi_split_lshift": { + "layout": [ + { "label": "Esc", "x": 0, "y": 0 }, + { "label": "1", "x": 1, "y": 0 }, + { "label": "2", "x": 2, "y": 0 }, + { "label": "3", "x": 3, "y": 0 }, + { "label": "4", "x": 4, "y": 0 }, + { "label": "5", "x": 5, "y": 0 }, + { "label": "6", "x": 6, "y": 0 }, + { "label": "7", "x": 7, "y": 0 }, + { "label": "8", "x": 8, "y": 0 }, + { "label": "9", "x": 9, "y": 0 }, + { "label": "0", "x": 10, "y": 0 }, + { "label": "-", "x": 11, "y": 0 }, + { "label": "=", "x": 12, "y": 0 }, + { "label": "Backspace", "x": 13, "y": 0, "w": 2 }, + { "label": "Encode", "x": 15, "y": 0 }, + + { "label": "Tab", "x": 0, "y": 1, "w": 1.5 }, + { "label": "Q", "x": 1.5, "y": 1 }, + { "label": "W", "x": 2.5, "y": 1 }, + { "label": "E", "x": 3.5, "y": 1 }, + { "label": "R", "x": 4.5, "y": 1 }, + { "label": "T", "x": 5.5, "y": 1 }, + { "label": "Y", "x": 6.5, "y": 1 }, + { "label": "U", "x": 7.5, "y": 1 }, + { "label": "I", "x": 8.5, "y": 1 }, + { "label": "O", "x": 9.5, "y": 1 }, + { "label": "P", "x": 10.5, "y": 1 }, + { "label": "[", "x": 11.5, "y": 1 }, + { "label": "]", "x": 12.5, "y": 1 }, + { "label": "\\", "x": 13.5, "y": 1, "w": 1.5 }, + { "label": "Delete", "x": 15, "y": 1 }, + + { "label": "Caps Lock", "x": 0, "y": 2, "w": 1.75 }, + { "label": "A", "x": 1.75, "y": 2 }, + { "label": "S", "x": 2.75, "y": 2 }, + { "label": "D", "x": 3.75, "y": 2 }, + { "label": "F", "x": 4.75, "y": 2 }, + { "label": "G", "x": 5.75, "y": 2 }, + { "label": "H", "x": 6.75, "y": 2 }, + { "label": "J", "x": 7.75, "y": 2 }, + { "label": "K", "x": 8.75, "y": 2 }, + { "label": "L", "x": 9.75, "y": 2 }, + { "label": ";", "x": 10.75, "y": 2 }, + { "label": "'", "x": 11.75, "y": 2 }, + { "label": "Enter", "x": 12.75, "y": 2, "w": 2.25 }, + { "label": "PageUp", "x": 15, "y": 2 }, + + { "label": "Shift1", "x": 0, "y": 3, "w": 1.25 }, + { "label": "Shift2", "x": 1.25, "y": 3 }, + { "label": "Z", "x": 2.25, "y": 3 }, + { "label": "X", "x": 3.25, "y": 3 }, + { "label": "C", "x": 4.25, "y": 3 }, + { "label": "V", "x": 5.25, "y": 3 }, + { "label": "B", "x": 6.25, "y": 3 }, + { "label": "N", "x": 7.25, "y": 3 }, + { "label": "M", "x": 8.25, "y": 3 }, + { "label": ",", "x": 9.25, "y": 3 }, + { "label": ".", "x": 10.25, "y": 3 }, + { "label": "/", "x": 11.25, "y": 3 }, + { "label": "Shift", "x": 12.25, "y": 3, "w": 1.75 }, + { "label": "\u2191", "x": 14, "y": 3 }, + { "label": "End", "x": 15, "y": 3 }, + + { "label": "Ctrl", "x": 0, "y": 4, "w": 1.25 }, + { "label": "Win", "x": 1.25, "y": 4, "w": 1.25 }, + { "label": "Alt", "x": 2.5, "y": 4, "w": 1.25 }, + { "x": 3.75, "y": 4, "w": 6.25 }, + { "label": "Alt", "x": 10, "y": 4, "w": 1.25 }, + { "label": "Fn", "x": 11.25, "y": 4, "w": 1.25 }, + { "label": "\u2190", "x": 13, "y": 4 }, + { "label": "\u2193", "x": 14, "y": 4 }, + { "label": "\u2192", "x": 15, "y": 4 } + ] + }, + "LAYOUT_65_split_space": { + "layout": [ + { "label": "Esc", "x": 0, "y": 0 }, + { "label": "1", "x": 1, "y": 0 }, + { "label": "2", "x": 2, "y": 0 }, + { "label": "3", "x": 3, "y": 0 }, + { "label": "4", "x": 4, "y": 0 }, + { "label": "5", "x": 5, "y": 0 }, + { "label": "6", "x": 6, "y": 0 }, + { "label": "7", "x": 7, "y": 0 }, + { "label": "8", "x": 8, "y": 0 }, + { "label": "9", "x": 9, "y": 0 }, + { "label": "0", "x": 10, "y": 0 }, + { "label": "-", "x": 11, "y": 0 }, + { "label": "=", "x": 12, "y": 0 }, + { "label": "Backspace", "x": 13, "y": 0, "w": 2 }, + { "label": "Encode", "x": 15, "y": 0 }, + + { "label": "Tab", "x": 0, "y": 1, "w": 1.5 }, + { "label": "Q", "x": 1.5, "y": 1 }, + { "label": "W", "x": 2.5, "y": 1 }, + { "label": "E", "x": 3.5, "y": 1 }, + { "label": "R", "x": 4.5, "y": 1 }, + { "label": "T", "x": 5.5, "y": 1 }, + { "label": "Y", "x": 6.5, "y": 1 }, + { "label": "U", "x": 7.5, "y": 1 }, + { "label": "I", "x": 8.5, "y": 1 }, + { "label": "O", "x": 9.5, "y": 1 }, + { "label": "P", "x": 10.5, "y": 1 }, + { "label": "[", "x": 11.5, "y": 1 }, + { "label": "]", "x": 12.5, "y": 1 }, + { "label": "\\", "x": 13.5, "y": 1, "w": 1.5 }, + { "label": "Delete", "x": 15, "y": 1 }, + + { "label": "Caps Lock", "x": 0, "y": 2, "w": 1.75 }, + { "label": "A", "x": 1.75, "y": 2 }, + { "label": "S", "x": 2.75, "y": 2 }, + { "label": "D", "x": 3.75, "y": 2 }, + { "label": "F", "x": 4.75, "y": 2 }, + { "label": "G", "x": 5.75, "y": 2 }, + { "label": "H", "x": 6.75, "y": 2 }, + { "label": "J", "x": 7.75, "y": 2 }, + { "label": "K", "x": 8.75, "y": 2 }, + { "label": "L", "x": 9.75, "y": 2 }, + { "label": ";", "x": 10.75, "y": 2 }, + { "label": "'", "x": 11.75, "y": 2 }, + { "label": "Enter", "x": 12.75, "y": 2, "w": 2.25 }, + { "label": "PageUp", "x": 15, "y": 2 }, + + { "label": "Shift", "x": 0, "y": 3, "w": 2.25 }, + { "label": "Z", "x": 2.25, "y": 3 }, + { "label": "X", "x": 3.25, "y": 3 }, + { "label": "C", "x": 4.25, "y": 3 }, + { "label": "V", "x": 5.25, "y": 3 }, + { "label": "B", "x": 6.25, "y": 3 }, + { "label": "N", "x": 7.25, "y": 3 }, + { "label": "M", "x": 8.25, "y": 3 }, + { "label": ",", "x": 9.25, "y": 3 }, + { "label": ".", "x": 10.25, "y": 3 }, + { "label": "/", "x": 11.25, "y": 3 }, + { "label": "Shift", "x": 12.25, "y": 3, "w": 1.75 }, + { "label": "\u2191", "x": 14, "y": 3 }, + { "label": "End", "x": 15, "y": 3 }, + + { "label": "Ctrl", "x": 0, "y": 4, "w": 1.25 }, + { "label": "Win", "x": 1.25, "y": 4, "w": 1.25 }, + { "label": "Alt", "x": 2.5, "y": 4, "w": 1.25 }, + { "x": 3.75, "y": 4, "w": 2.25 }, + { "x": 6, "y": 4, "w": 1.25 }, + { "x": 7.25, "y": 4, "w": 2.75 }, + { "label": "Alt", "x": 10, "y": 4, "w": 1.25 }, + { "label": "Fn", "x": 11.25, "y": 4, "w": 1.25 }, + { "label": "\u2190", "x": 13, "y": 4 }, + { "label": "\u2193", "x": 14, "y": 4 }, + { "label": "\u2192", "x": 15, "y": 4 } + ] + } + } +} diff --git a/keyboards/meletrix/zoom65/keymaps/65_ansi/keymap.c b/keyboards/meletrix/zoom65/keymaps/65_ansi/keymap.c new file mode 100644 index 0000000000..07d58e9d2b --- /dev/null +++ b/keyboards/meletrix/zoom65/keymaps/65_ansi/keymap.c @@ -0,0 +1,34 @@ +/* Copyright 2021 meletrix + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_65_ansi_blocker( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_MUTE, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_65_ansi_blocker( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_MPLY, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; diff --git a/keyboards/meletrix/zoom65/keymaps/65_ansi/readme.md b/keyboards/meletrix/zoom65/keymaps/65_ansi/readme.md new file mode 100644 index 0000000000..f9dd323673 --- /dev/null +++ b/keyboards/meletrix/zoom65/keymaps/65_ansi/readme.md @@ -0,0 +1 @@ +# The 65_ansi_blocker keymap for zoom65 diff --git a/keyboards/meletrix/zoom65/keymaps/65_iso/keymap.c b/keyboards/meletrix/zoom65/keymaps/65_iso/keymap.c new file mode 100644 index 0000000000..ccdfb6fc2f --- /dev/null +++ b/keyboards/meletrix/zoom65/keymaps/65_iso/keymap.c @@ -0,0 +1,34 @@ +/* Copyright 2021 meletrix + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_65_iso_blocker( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_MUTE, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_ENT, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_65_iso_blocker( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_MPLY, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; diff --git a/keyboards/meletrix/zoom65/keymaps/65_iso/readme.md b/keyboards/meletrix/zoom65/keymaps/65_iso/readme.md new file mode 100644 index 0000000000..fd70c95050 --- /dev/null +++ b/keyboards/meletrix/zoom65/keymaps/65_iso/readme.md @@ -0,0 +1 @@ +# The 65_iso_blocker for zoom65 diff --git a/keyboards/meletrix/zoom65/keymaps/65_split_bs/keymap.c b/keyboards/meletrix/zoom65/keymaps/65_split_bs/keymap.c new file mode 100644 index 0000000000..a930987720 --- /dev/null +++ b/keyboards/meletrix/zoom65/keymaps/65_split_bs/keymap.c @@ -0,0 +1,34 @@ +/* Copyright 2021 meletrix + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_65_ansi_split_bs( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_MUTE, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_BSPC, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_65_ansi_split_bs( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_MPLY, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; diff --git a/keyboards/meletrix/zoom65/keymaps/65_split_bs/readme.md b/keyboards/meletrix/zoom65/keymaps/65_split_bs/readme.md new file mode 100644 index 0000000000..34c59ba014 --- /dev/null +++ b/keyboards/meletrix/zoom65/keymaps/65_split_bs/readme.md @@ -0,0 +1 @@ +# The 65_split_bs keymap for zoom65 diff --git a/keyboards/meletrix/zoom65/keymaps/65_split_lshift/keymap.c b/keyboards/meletrix/zoom65/keymaps/65_split_lshift/keymap.c new file mode 100644 index 0000000000..91c9179516 --- /dev/null +++ b/keyboards/meletrix/zoom65/keymaps/65_split_lshift/keymap.c @@ -0,0 +1,34 @@ +/* Copyright 2021 meletrix + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_65_ansi_split_lshift( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_MUTE, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_65_ansi_split_lshift( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_MPLY, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; diff --git a/keyboards/meletrix/zoom65/keymaps/65_split_lshift/readme.md b/keyboards/meletrix/zoom65/keymaps/65_split_lshift/readme.md new file mode 100644 index 0000000000..e56989b24a --- /dev/null +++ b/keyboards/meletrix/zoom65/keymaps/65_split_lshift/readme.md @@ -0,0 +1 @@ +# The 65_split_lshift keymap for zoom65 diff --git a/keyboards/meletrix/zoom65/keymaps/65_split_space/keymap.c b/keyboards/meletrix/zoom65/keymaps/65_split_space/keymap.c new file mode 100644 index 0000000000..b63aff9a9e --- /dev/null +++ b/keyboards/meletrix/zoom65/keymaps/65_split_space/keymap.c @@ -0,0 +1,34 @@ +/* Copyright 2021 meletrix + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_65_split_space( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_MUTE, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_65_split_space( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_MPLY, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; diff --git a/keyboards/meletrix/zoom65/keymaps/65_split_space/readme.md b/keyboards/meletrix/zoom65/keymaps/65_split_space/readme.md new file mode 100644 index 0000000000..4bd0ee67db --- /dev/null +++ b/keyboards/meletrix/zoom65/keymaps/65_split_space/readme.md @@ -0,0 +1 @@ +# The 65_split_space keymap for zoom65 diff --git a/keyboards/meletrix/zoom65/keymaps/default/keymap.c b/keyboards/meletrix/zoom65/keymaps/default/keymap.c new file mode 100644 index 0000000000..a0a62d2967 --- /dev/null +++ b/keyboards/meletrix/zoom65/keymaps/default/keymap.c @@ -0,0 +1,34 @@ +/* Copyright 2021 meletrix + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_VOLD, KC_MUTE, KC_VOLU, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_BSPC, KC_PGUP, + KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_all( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_MPRV, KC_MPLY, KC_MNXT, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; diff --git a/keyboards/meletrix/zoom65/keymaps/default/readme.md b/keyboards/meletrix/zoom65/keymaps/default/readme.md new file mode 100644 index 0000000000..32dfecc265 --- /dev/null +++ b/keyboards/meletrix/zoom65/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for zoom65 diff --git a/keyboards/meletrix/zoom65/keymaps/via/keymap.c b/keyboards/meletrix/zoom65/keymaps/via/keymap.c new file mode 100644 index 0000000000..f703822906 --- /dev/null +++ b/keyboards/meletrix/zoom65/keymaps/via/keymap.c @@ -0,0 +1,48 @@ +/* Copyright 2021 meletrix + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_VOLD, KC_MUTE, KC_VOLU, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_BSPC, KC_PGUP, + KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_all( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_MPRV, KC_MPLY, KC_MNXT, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [2] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [3] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; diff --git a/keyboards/meletrix/zoom65/keymaps/via/readme.md b/keyboards/meletrix/zoom65/keymaps/via/readme.md new file mode 100644 index 0000000000..5bc43e82b3 --- /dev/null +++ b/keyboards/meletrix/zoom65/keymaps/via/readme.md @@ -0,0 +1 @@ +# The via keymap for zoom65 diff --git a/keyboards/meletrix/zoom65/keymaps/via/rules.mk b/keyboards/meletrix/zoom65/keymaps/via/rules.mk new file mode 100644 index 0000000000..43061db1dd --- /dev/null +++ b/keyboards/meletrix/zoom65/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes \ No newline at end of file diff --git a/keyboards/meletrix/zoom65/readme.md b/keyboards/meletrix/zoom65/readme.md new file mode 100644 index 0000000000..dc56f69949 --- /dev/null +++ b/keyboards/meletrix/zoom65/readme.md @@ -0,0 +1,26 @@ +# zoom65 + +![zoom65](https://i.imgur.com/NIbreqdh.jpeg) + +Meletrix's first mass-produced mechanical keyboard. +More Info at [zoom](https://zoom65.com/). +​ +* Keyboard Maintainer: [spbgzh](https://github.com/spbgzh) +* Hardware Supported: zoom65 Standard +* Hardware Availability: [zoom](https://zoom65.com/) +​ +Make example for this keyboard (after setting up your build environment): + + make meletrix/zoom65:default + +Flashing example for this keyboard: + + make meletrix/zoom65:default:flash + +To reset the board into bootloader mode, do one of the following: + +* Tap the Reset switch mounted on the PCB +* In the case of the default keymap, use the key combination Fn + End +* Hold the Esc key while connecting the USB cable (also erases persistent settings) + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/meletrix/zoom65/rules.mk b/keyboards/meletrix/zoom65/rules.mk new file mode 100644 index 0000000000..b481714b72 --- /dev/null +++ b/keyboards/meletrix/zoom65/rules.mk @@ -0,0 +1,24 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +ENCODER_ENABLE = yes # Enable Encoder + +LAYOUT = 65_ansi_blocker 65_iso_blocker diff --git a/keyboards/meletrix/zoom65/zoom65.c b/keyboards/meletrix/zoom65/zoom65.c new file mode 100644 index 0000000000..f69ed547ef --- /dev/null +++ b/keyboards/meletrix/zoom65/zoom65.c @@ -0,0 +1,66 @@ +/* Copyright 2021 meletrix + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "zoom65.h" + +#ifdef VIA_ENABLE +static uint8_t encoder_state[ENCODERS] = {0}; +static keypos_t encoder_cw[ENCODERS] = ENCODERS_CW_KEY; +static keypos_t encoder_ccw[ENCODERS] = ENCODERS_CCW_KEY; + +void encoder_action_unregister(void) +{ + for (int index = 0; index < ENCODERS; ++index) + { + if (encoder_state[index]) + { + keyevent_t encoder_event = (keyevent_t){ + .key = encoder_state[index] >> 1 ? encoder_cw[index] : encoder_ccw[index], + .pressed = false, + .time = (timer_read() | 1)}; + encoder_state[index] = 0; + action_exec(encoder_event); + } + } +} +void encoder_action_register(uint8_t index, bool clockwise) +{ + keyevent_t encoder_event = (keyevent_t){ + .key = clockwise ? encoder_cw[index] : encoder_ccw[index], + .pressed = true, + .time = (timer_read() | 1)}; + encoder_state[index] = (clockwise ^ 1) | (clockwise << 1); + action_exec(encoder_event); +} + +void matrix_scan_kb(void) +{ + encoder_action_unregister(); + matrix_scan_user(); +} + +bool encoder_update_kb(uint8_t index, bool clockwise) +{ + encoder_action_register(index, clockwise); + return true; +}; +#else +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + tap_code_delay(clockwise ? KC_VOLU : KC_VOLD, 10); + return true; +} +#endif diff --git a/keyboards/meletrix/zoom65/zoom65.h b/keyboards/meletrix/zoom65/zoom65.h new file mode 100644 index 0000000000..400fdcbf3b --- /dev/null +++ b/keyboards/meletrix/zoom65/zoom65.h @@ -0,0 +1,187 @@ +/* Copyright 2021 meletrix + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + + +/* Standard Arrangement + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ + * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0d │2d │ ◯ ISO + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┐ ┌─────┐ + * │10 │11 │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │1e │ │1d │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤ ┌──┴┐ │ + * │20 │21 │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │2e │ │2c │ │ + * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤ └───┴────┘ + * │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3c │3d │3e │ + * ├────┼───┴┬──┴─┬─┴───┴──┬┴───┼───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤ + * │40 │41 │42 │44 │46 │48 │4a │4b │ │4c │4d │4e │ + * └────┴────┴────┴────────┴────┴──────────┴────┴────┘ └───┴───┴───┘ + */ +#define LAYOUT_all( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K43, K0E, K45, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K44, K46, K48, K4A, K4B, K4C, K4D, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, K41, K42, K43, K44, K45, K46, KC_NO, K48, KC_NO, K4A, K4B, K4C, K4D, K4E }, \ +} + + +/* LAYOUT_65_ansi_blocker + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ + * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0d │ ◯ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┐ + * │10 │11 │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │1e │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤ + * │20 │21 │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │2e │ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤ + * │30 │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3c │3d │3e │ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤ + * │40 │41 │42 │46 │4a │4b │ │4c │4d │4e │ + * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘ + */ +#define LAYOUT_65_ansi_blocker( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2E, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K46, K4A, K4B, K4C, K4D, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, KC_NO, K2E }, \ + { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, K4E }, \ +} + + +/* LAYOUT_65_iso_blocker + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ + * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0d │ ◯ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┐ + * │10 │11 │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │1e │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ ├───┤ + * │20 │21 │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │ │2e │ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┼───┤ + * │30 │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3c │3d │3e │ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤ + * │40 │41 │42 │46 │4a │4b │ │4c │4d │4e │ + * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘ + */ +#define LAYOUT_65_iso_blocker( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2E, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K46, K4A, K4B, K4C, K4D, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, KC_NO, K2E }, \ + { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, K4E }, \ +} + + +/* LAYOUT_65_ansi_split_bs + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ + * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0d │2d │ ◯ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┐ + * │10 │11 │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │1e │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤ + * │20 │21 │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │2e │ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤ + * │30 │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3c │3d │3e │ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤ + * │40 │41 │42 │46 │4a │4b │ │4c │4d │4e │ + * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘ + */ +#define LAYOUT_65_ansi_split_bs( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K46, K4A, K4B, K4C, K4D, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E }, \ + { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, K4E }, \ +} + + +/* LAYOUT_65_ansi_split_lshift + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ + * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0d │ ◯ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┐ + * │10 │11 │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │1e │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤ + * │20 │21 │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │2e │ + * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤ + * │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3c │3d │3e │ + * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤ + * │40 │41 │42 │46 │4a │4b │ │4c │4d │4e │ + * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘ + */ +#define LAYOUT_65_ansi_split_lshift( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2E, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K46, K4A, K4B, K4C, K4D, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, KC_NO, K2E }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, K4E }, \ +} + + +/* LAYOUT_65_split_space + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ + * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0d │ ◯ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┐ + * │10 │11 │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │1e │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤ + * │20 │21 │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │2e │ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤ + * │30 │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3c │3d │3e │ + * ├────┬───┴┬──┴─┬─┴───┴──┬┴───┼───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤ + * │40 │41 │42 │44 │46 │48 │4a │4b │ │4c │4d │4e │ + * └────┴────┴────┴────────┴────┴──────────┴────┴────┘ └───┴───┴───┘ + */ +#define LAYOUT_65_split_space( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2E, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K44, K46, K48, K4A, K4B, K4C, K4D, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, KC_NO, K2E }, \ + { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, K41, K42, KC_NO, K44, KC_NO, K46, KC_NO, K48, KC_NO, K4A, K4B, K4C, K4D, K4E }, \ +} From eb8174bc405b464be5c9116e8641851a858dcae3 Mon Sep 17 00:00:00 2001 From: GG <72414103+spbgzh@users.noreply.github.com> Date: Wed, 27 Oct 2021 02:04:39 +0300 Subject: [PATCH 340/595] [Keyboard] Add Mammoth75x (#14925) --- keyboards/wuque/mammoth75x/config.h | 57 ++ keyboards/wuque/mammoth75x/info.json | 571 ++++++++++++++++++ .../wuque/mammoth75x/keymaps/75_ansi/keymap.c | 36 ++ .../mammoth75x/keymaps/75_ansi/readme.md | 1 + .../mammoth75x/keymaps/75_split_bs/keymap.c | 36 ++ .../mammoth75x/keymaps/75_split_bs/readme.md | 1 + .../keymaps/75_split_lshift/keymap.c | 36 ++ .../keymaps/75_split_lshift/readme.md | 1 + .../keymaps/75_split_rshift/keymap.c | 36 ++ .../keymaps/75_split_rshift/readme.md | 1 + .../keymaps/75_split_space/keymap.c | 36 ++ .../keymaps/75_split_space/readme.md | 1 + .../wuque/mammoth75x/keymaps/default/keymap.c | 36 ++ .../mammoth75x/keymaps/default/readme.md | 1 + .../wuque/mammoth75x/keymaps/via/keymap.c | 52 ++ .../wuque/mammoth75x/keymaps/via/readme.md | 1 + .../wuque/mammoth75x/keymaps/via/rules.mk | 2 + keyboards/wuque/mammoth75x/mammoth75x.c | 67 ++ keyboards/wuque/mammoth75x/mammoth75x.h | 223 +++++++ keyboards/wuque/mammoth75x/readme.md | 25 + keyboards/wuque/mammoth75x/rules.mk | 22 + 21 files changed, 1242 insertions(+) create mode 100644 keyboards/wuque/mammoth75x/config.h create mode 100644 keyboards/wuque/mammoth75x/info.json create mode 100644 keyboards/wuque/mammoth75x/keymaps/75_ansi/keymap.c create mode 100644 keyboards/wuque/mammoth75x/keymaps/75_ansi/readme.md create mode 100644 keyboards/wuque/mammoth75x/keymaps/75_split_bs/keymap.c create mode 100644 keyboards/wuque/mammoth75x/keymaps/75_split_bs/readme.md create mode 100644 keyboards/wuque/mammoth75x/keymaps/75_split_lshift/keymap.c create mode 100644 keyboards/wuque/mammoth75x/keymaps/75_split_lshift/readme.md create mode 100644 keyboards/wuque/mammoth75x/keymaps/75_split_rshift/keymap.c create mode 100644 keyboards/wuque/mammoth75x/keymaps/75_split_rshift/readme.md create mode 100644 keyboards/wuque/mammoth75x/keymaps/75_split_space/keymap.c create mode 100644 keyboards/wuque/mammoth75x/keymaps/75_split_space/readme.md create mode 100644 keyboards/wuque/mammoth75x/keymaps/default/keymap.c create mode 100644 keyboards/wuque/mammoth75x/keymaps/default/readme.md create mode 100644 keyboards/wuque/mammoth75x/keymaps/via/keymap.c create mode 100644 keyboards/wuque/mammoth75x/keymaps/via/readme.md create mode 100644 keyboards/wuque/mammoth75x/keymaps/via/rules.mk create mode 100644 keyboards/wuque/mammoth75x/mammoth75x.c create mode 100644 keyboards/wuque/mammoth75x/mammoth75x.h create mode 100644 keyboards/wuque/mammoth75x/readme.md create mode 100644 keyboards/wuque/mammoth75x/rules.mk diff --git a/keyboards/wuque/mammoth75x/config.h b/keyboards/wuque/mammoth75x/config.h new file mode 100644 index 0000000000..019a70f50d --- /dev/null +++ b/keyboards/wuque/mammoth75x/config.h @@ -0,0 +1,57 @@ +/* +Copyright 2021 wuquestudio + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xA06B +#define PRODUCT_ID 0x0004 +#define DEVICE_VER 0x0001 +#define MANUFACTURER wuque studio +#define PRODUCT mammoth75x + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 16 + +#define MATRIX_ROW_PINS { B0, C7, D2, F7, D1, D0 } +#define MATRIX_COL_PINS { D3, D5, D4, D6, D7, B4, B5, E6, F0, F1, F4, F5, F6, C6, B7, B3 } + +#define DIODE_DIRECTION COL2ROW + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* Enable encoder */ +#define ENCODERS_PAD_A { B2 } +#define ENCODERS_PAD_B { B1 } + +#define ENCODERS 1 +// Note: array is { col, row ) +#define ENCODERS_CW_KEY { { 5, 5 } } +#define ENCODERS_CCW_KEY { { 3, 5 } } + +#define LED_CAPS_LOCK_PIN B6 +#define LED_PIN_ON_STATE 0 diff --git a/keyboards/wuque/mammoth75x/info.json b/keyboards/wuque/mammoth75x/info.json new file mode 100644 index 0000000000..4e65f83537 --- /dev/null +++ b/keyboards/wuque/mammoth75x/info.json @@ -0,0 +1,571 @@ +{ + "keyboard_name": "mammoth75x", + "url": "https://shop.wuquestudio.com/", + "maintainer": "spbgzh", + "layouts": { + "LAYOUT_all": { + "layout": [ + { "label": "Esc", "x": 0, "y": 0 }, + { "label": "F1", "x": 1.5, "y": 0 }, + { "label": "F2", "x": 2.5, "y": 0 }, + { "label": "F3", "x": 3.5, "y": 0 }, + { "label": "F4", "x": 4.5, "y": 0 }, + { "label": "F5", "x": 6, "y": 0 }, + { "label": "F6", "x": 7, "y": 0 }, + { "label": "F7", "x": 8, "y": 0 }, + { "label": "F8", "x": 9, "y": 0 }, + { "label": "F9", "x": 10.5, "y": 0 }, + { "label": "F10", "x": 11.5, "y": 0 }, + { "label": "F11", "x": 12.5, "y": 0 }, + { "label": "F12", "x": 13.5, "y": 0 }, + { "label": "Delete", "x": 15, "y": 0 }, + { "label": "EncoderRotateL", "x": 15.25, "y": 1.25, "w": 0.25 }, + { "label": "EncoderClick", "x": 15.75, "y": 1.25 }, + { "label": "EncoderRotateR", "x": 16.75, "y": 1.25, "w": 0.25 }, + + { "label": "~", "x": 0, "y": 1.25 }, + { "label": "1", "x": 1, "y": 1.25 }, + { "label": "2", "x": 2, "y": 1.25 }, + { "label": "3", "x": 3, "y": 1.25 }, + { "label": "4", "x": 4, "y": 1.25 }, + { "label": "5", "x": 5, "y": 1.25 }, + { "label": "6", "x": 6, "y": 1.25 }, + { "label": "7", "x": 7, "y": 1.25 }, + { "label": "8", "x": 8, "y": 1.25 }, + { "label": "9", "x": 9, "y": 1.25 }, + { "label": "0", "x": 10, "y": 1.25 }, + { "label": "-", "x": 11, "y": 1.25 }, + { "label": "=", "x": 12, "y": 1.25 }, + { "label": "Backspace", "x": 13, "y": 1.25 }, + + { "label": "Tab", "x": 0, "y": 2.25, "w": 1.5 }, + { "label": "Q", "x": 1.5, "y": 2.25 }, + { "label": "W", "x": 2.5, "y": 2.25 }, + { "label": "E", "x": 3.5, "y": 2.25 }, + { "label": "R", "x": 4.5, "y": 2.25 }, + { "label": "T", "x": 5.5, "y": 2.25 }, + { "label": "Y", "x": 6.5, "y": 2.25 }, + { "label": "U", "x": 7.5, "y": 2.25 }, + { "label": "I", "x": 8.5, "y": 2.25 }, + { "label": "O", "x": 9.5, "y": 2.25 }, + { "label": "P", "x": 10.5, "y": 2.25 }, + { "label": "[", "x": 11.5, "y": 2.25 }, + { "label": "]", "x": 12.5, "y": 2.25 }, + { "label": "\\", "x": 13.5,"y": 2.25, "w": 1.5 }, + { "label": "Home", "x": 15.25, "y": 2.25 }, + { "label": "PageUp", "x": 16.25, "y": 2.25 }, + + { "label": "Caps Lock", "x": 0, "y": 3.25, "w": 1.75 }, + { "label": "A", "x": 1.75, "y": 3.25 }, + { "label": "S", "x": 2.75, "y": 3.25 }, + { "label": "D", "x": 3.75, "y": 3.25 }, + { "label": "F", "x": 4.75, "y": 3.25 }, + { "label": "G", "x": 5.75, "y": 3.25 }, + { "label": "H", "x": 6.75, "y": 3.25 }, + { "label": "J", "x": 7.75, "y": 3.25 }, + { "label": "K", "x": 8.75, "y": 3.25 }, + { "label": "L", "x": 9.75, "y": 3.25 }, + { "label": ";", "x": 10.75, "y": 3.25 }, + { "label": "'", "x": 11.75, "y": 3.25 }, + { "label": "Enter", "x": 12.75, "y": 3.25, "w": 2.25 }, + { "label": "Backspace1", "x": 14, "y": 1.25 }, + { "label": "End", "x": 15.25, "y": 3.25 }, + { "label": "PageDown", "x": 16.25, "y": 3.25 }, + + { "label": "Shift1", "x": 0, "y": 4.25, "w": 1.25 }, + { "label": "Shift2", "x": 1.25, "y": 4.25 }, + { "label": "Z", "x": 2.25, "y": 4.25 }, + { "label": "X", "x": 3.25, "y": 4.25 }, + { "label": "C", "x": 4.25, "y": 4.25 }, + { "label": "V", "x": 5.25, "y": 4.25 }, + { "label": "B", "x": 6.25, "y": 4.25 }, + { "label": "N", "x": 7.25, "y": 4.25 }, + { "label": "M", "x": 8.25, "y": 4.25 }, + { "label": ",", "x": 9.25, "y": 4.25 }, + { "label": ".", "x": 10.25, "y": 4.25 }, + { "label": "/", "x": 11.25, "y": 4.25 }, + { "label": "Shift1", "x": 12.25, "y": 4.25, "w": 1.75 }, + { "label": "Shift2", "x": 14, "y": 4.25 }, + { "label": "\u2191", "x": 15.25, "y": 4.25 }, + + { "label": "Ctrl", "x": 0, "y": 5.25, "w": 1.25 }, + { "label": "Win", "x": 1.25, "y": 5.25, "w": 1.25 }, + { "label": "Alt", "x": 2.5, "y": 5.25, "w": 1.25 }, + { "label": "Space","x": 3.75, "y": 5.25, "w": 2.25 }, + { "label": "Space","x": 6, "y": 5.25, "w": 1.25 }, + { "label": "Space","x": 7.25, "y": 5.25, "w": 2.75 }, + { "label": "Alt", "x": 10, "y": 5.25, "w": 1.25 }, + { "label": "Ctrl", "x": 11.25, "y": 5.25, "w": 1.25 }, + { "label": "Menu", "x": 12.5, "y": 5.25, "w": 1.25 }, + { "label": "\u2190", "x": 14.25, "y": 5.25 }, + { "label": "\u2193", "x": 15.25, "y": 5.25 }, + { "label": "\u2192", "x": 16.25, "y": 5.25 } + ] + }, + "LAYOUT_75_ansi": { + "layout": [ + { "label": "Esc", "x": 0, "y": 0 }, + { "label": "F1", "x": 1.5, "y": 0 }, + { "label": "F2", "x": 2.5, "y": 0 }, + { "label": "F3", "x": 3.5, "y": 0 }, + { "label": "F4", "x": 4.5, "y": 0 }, + { "label": "F5", "x": 6, "y": 0 }, + { "label": "F6", "x": 7, "y": 0 }, + { "label": "F7", "x": 8, "y": 0 }, + { "label": "F8", "x": 9, "y": 0 }, + { "label": "F9", "x": 10.5, "y": 0 }, + { "label": "F10", "x": 11.5, "y": 0 }, + { "label": "F11", "x": 12.5, "y": 0 }, + { "label": "F12", "x": 13.5, "y": 0 }, + { "label": "Delete", "x": 15, "y": 0 }, + { "label": "EncoderClick", "x": 15.75, "y": 1.25 }, + + { "label": "~", "x": 0, "y": 1.25 }, + { "label": "1", "x": 1, "y": 1.25 }, + { "label": "2", "x": 2, "y": 1.25 }, + { "label": "3", "x": 3, "y": 1.25 }, + { "label": "4", "x": 4, "y": 1.25 }, + { "label": "5", "x": 5, "y": 1.25 }, + { "label": "6", "x": 6, "y": 1.25 }, + { "label": "7", "x": 7, "y": 1.25 }, + { "label": "8", "x": 8, "y": 1.25 }, + { "label": "9", "x": 9, "y": 1.25 }, + { "label": "0", "x": 10, "y": 1.25 }, + { "label": "-", "x": 11, "y": 1.25 }, + { "label": "=", "x": 12, "y": 1.25 }, + { "label": "Backspace", "x": 13, "y": 1.25, "w":2}, + + { "label": "Tab", "x": 0, "y": 2.25, "w": 1.5 }, + { "label": "Q", "x": 1.5, "y": 2.25 }, + { "label": "W", "x": 2.5, "y": 2.25 }, + { "label": "E", "x": 3.5, "y": 2.25 }, + { "label": "R", "x": 4.5, "y": 2.25 }, + { "label": "T", "x": 5.5, "y": 2.25 }, + { "label": "Y", "x": 6.5, "y": 2.25 }, + { "label": "U", "x": 7.5, "y": 2.25 }, + { "label": "I", "x": 8.5, "y": 2.25 }, + { "label": "O", "x": 9.5, "y": 2.25 }, + { "label": "P", "x": 10.5, "y": 2.25 }, + { "label": "[", "x": 11.5, "y": 2.25 }, + { "label": "]", "x": 12.5, "y": 2.25 }, + { "label": "\\", "x": 13.5,"y": 2.25, "w": 1.5 }, + { "label": "Home", "x": 15.25, "y": 2.25 }, + { "label": "PageUp", "x": 16.25, "y": 2.25 }, + + { "label": "Caps Lock", "x": 0, "y": 3.25, "w": 1.75 }, + { "label": "A", "x": 1.75, "y": 3.25 }, + { "label": "S", "x": 2.75, "y": 3.25 }, + { "label": "D", "x": 3.75, "y": 3.25 }, + { "label": "F", "x": 4.75, "y": 3.25 }, + { "label": "G", "x": 5.75, "y": 3.25 }, + { "label": "H", "x": 6.75, "y": 3.25 }, + { "label": "J", "x": 7.75, "y": 3.25 }, + { "label": "K", "x": 8.75, "y": 3.25 }, + { "label": "L", "x": 9.75, "y": 3.25 }, + { "label": ";", "x": 10.75, "y": 3.25 }, + { "label": "'", "x": 11.75, "y": 3.25 }, + { "label": "Enter", "x": 12.75, "y": 3.25, "w": 2.25 }, + { "label": "End", "x": 15.25, "y": 3.25 }, + { "label": "PageDown", "x": 16.25, "y": 3.25 }, + + { "label": "Shift", "x": 0, "y": 4.25, "w": 2.25 }, + { "label": "Z", "x": 2.25, "y": 4.25 }, + { "label": "X", "x": 3.25, "y": 4.25 }, + { "label": "C", "x": 4.25, "y": 4.25 }, + { "label": "V", "x": 5.25, "y": 4.25 }, + { "label": "B", "x": 6.25, "y": 4.25 }, + { "label": "N", "x": 7.25, "y": 4.25 }, + { "label": "M", "x": 8.25, "y": 4.25 }, + { "label": ",", "x": 9.25, "y": 4.25 }, + { "label": ".", "x": 10.25, "y": 4.25 }, + { "label": "/", "x": 11.25, "y": 4.25 }, + { "label": "Shift", "x": 12.25, "y": 4.25, "w": 2.75 }, + { "label": "\u2191", "x": 15.25, "y": 4.25 }, + + { "label": "Ctrl", "x": 0, "y": 5.25, "w": 1.25 }, + { "label": "Win", "x": 1.25, "y": 5.25, "w": 1.25 }, + { "label": "Alt", "x": 2.5, "y": 5.25, "w": 1.25 }, + { "label": "Space","x": 3.75, "y": 5.25, "w": 6.25 }, + { "label": "Alt", "x": 10, "y": 5.25, "w": 1.25 }, + { "label": "Ctrl", "x": 11.25, "y": 5.25, "w": 1.25 }, + { "label": "Menu", "x": 12.5, "y": 5.25, "w": 1.25 }, + { "label": "\u2190", "x": 14.25, "y": 5.25 }, + { "label": "\u2193", "x": 15.25, "y": 5.25 }, + { "label": "\u2192", "x": 16.25, "y": 5.25 } + ] + }, + "LAYOUT_75_ansi_split_lshift": { + "layout": [ + { "label": "Esc", "x": 0, "y": 0 }, + { "label": "F1", "x": 1.5, "y": 0 }, + { "label": "F2", "x": 2.5, "y": 0 }, + { "label": "F3", "x": 3.5, "y": 0 }, + { "label": "F4", "x": 4.5, "y": 0 }, + { "label": "F5", "x": 6, "y": 0 }, + { "label": "F6", "x": 7, "y": 0 }, + { "label": "F7", "x": 8, "y": 0 }, + { "label": "F8", "x": 9, "y": 0 }, + { "label": "F9", "x": 10.5, "y": 0 }, + { "label": "F10", "x": 11.5, "y": 0 }, + { "label": "F11", "x": 12.5, "y": 0 }, + { "label": "F12", "x": 13.5, "y": 0 }, + { "label": "Delete", "x": 15, "y": 0 }, + { "label": "EncoderClick", "x": 15.75, "y": 1.25 }, + + { "label": "~", "x": 0, "y": 1.25 }, + { "label": "1", "x": 1, "y": 1.25 }, + { "label": "2", "x": 2, "y": 1.25 }, + { "label": "3", "x": 3, "y": 1.25 }, + { "label": "4", "x": 4, "y": 1.25 }, + { "label": "5", "x": 5, "y": 1.25 }, + { "label": "6", "x": 6, "y": 1.25 }, + { "label": "7", "x": 7, "y": 1.25 }, + { "label": "8", "x": 8, "y": 1.25 }, + { "label": "9", "x": 9, "y": 1.25 }, + { "label": "0", "x": 10, "y": 1.25 }, + { "label": "-", "x": 11, "y": 1.25 }, + { "label": "=", "x": 12, "y": 1.25 }, + { "label": "Backspace", "x": 13, "y": 1.25, "w":2}, + + { "label": "Tab", "x": 0, "y": 2.25, "w": 1.5 }, + { "label": "Q", "x": 1.5, "y": 2.25 }, + { "label": "W", "x": 2.5, "y": 2.25 }, + { "label": "E", "x": 3.5, "y": 2.25 }, + { "label": "R", "x": 4.5, "y": 2.25 }, + { "label": "T", "x": 5.5, "y": 2.25 }, + { "label": "Y", "x": 6.5, "y": 2.25 }, + { "label": "U", "x": 7.5, "y": 2.25 }, + { "label": "I", "x": 8.5, "y": 2.25 }, + { "label": "O", "x": 9.5, "y": 2.25 }, + { "label": "P", "x": 10.5, "y": 2.25 }, + { "label": "[", "x": 11.5, "y": 2.25 }, + { "label": "]", "x": 12.5, "y": 2.25 }, + { "label": "\\", "x": 13.5,"y": 2.25, "w": 1.5 }, + { "label": "Home", "x": 15.25, "y": 2.25 }, + { "label": "PageUp", "x": 16.25, "y": 2.25 }, + + { "label": "Caps Lock", "x": 0, "y": 3.25, "w": 1.75 }, + { "label": "A", "x": 1.75, "y": 3.25 }, + { "label": "S", "x": 2.75, "y": 3.25 }, + { "label": "D", "x": 3.75, "y": 3.25 }, + { "label": "F", "x": 4.75, "y": 3.25 }, + { "label": "G", "x": 5.75, "y": 3.25 }, + { "label": "H", "x": 6.75, "y": 3.25 }, + { "label": "J", "x": 7.75, "y": 3.25 }, + { "label": "K", "x": 8.75, "y": 3.25 }, + { "label": "L", "x": 9.75, "y": 3.25 }, + { "label": ";", "x": 10.75, "y": 3.25 }, + { "label": "'", "x": 11.75, "y": 3.25 }, + { "label": "Enter", "x": 12.75, "y": 3.25, "w": 2.25 }, + { "label": "End", "x": 15.25, "y": 3.25 }, + { "label": "PageDown", "x": 16.25, "y": 3.25 }, + + { "label": "Shift1", "x": 0, "y": 4.25, "w": 1.25 }, + { "label": "Shift2", "x": 1.25, "y": 4.25 }, + { "label": "Z", "x": 2.25, "y": 4.25 }, + { "label": "X", "x": 3.25, "y": 4.25 }, + { "label": "C", "x": 4.25, "y": 4.25 }, + { "label": "V", "x": 5.25, "y": 4.25 }, + { "label": "B", "x": 6.25, "y": 4.25 }, + { "label": "N", "x": 7.25, "y": 4.25 }, + { "label": "M", "x": 8.25, "y": 4.25 }, + { "label": ",", "x": 9.25, "y": 4.25 }, + { "label": ".", "x": 10.25, "y": 4.25 }, + { "label": "/", "x": 11.25, "y": 4.25 }, + { "label": "Shift", "x": 12.25, "y": 4.25, "w": 2.75 }, + { "label": "\u2191", "x": 15.25, "y": 4.25 }, + + { "label": "Ctrl", "x": 0, "y": 5.25, "w": 1.25 }, + { "label": "Win", "x": 1.25, "y": 5.25, "w": 1.25 }, + { "label": "Alt", "x": 2.5, "y": 5.25, "w": 1.25 }, + { "label": "Space","x": 3.75, "y": 5.25, "w": 6.25 }, + { "label": "Alt", "x": 10, "y": 5.25, "w": 1.25 }, + { "label": "Ctrl", "x": 11.25, "y": 5.25, "w": 1.25 }, + { "label": "Menu", "x": 12.5, "y": 5.25, "w": 1.25 }, + { "label": "\u2190", "x": 14.25, "y": 5.25 }, + { "label": "\u2193", "x": 15.25, "y": 5.25 }, + { "label": "\u2192", "x": 16.25, "y": 5.25 } + ] + }, + "LAYOUT_75_ansi_split_rshift": { + "layout": [ + { "label": "Esc", "x": 0, "y": 0 }, + { "label": "F1", "x": 1.5, "y": 0 }, + { "label": "F2", "x": 2.5, "y": 0 }, + { "label": "F3", "x": 3.5, "y": 0 }, + { "label": "F4", "x": 4.5, "y": 0 }, + { "label": "F5", "x": 6, "y": 0 }, + { "label": "F6", "x": 7, "y": 0 }, + { "label": "F7", "x": 8, "y": 0 }, + { "label": "F8", "x": 9, "y": 0 }, + { "label": "F9", "x": 10.5, "y": 0 }, + { "label": "F10", "x": 11.5, "y": 0 }, + { "label": "F11", "x": 12.5, "y": 0 }, + { "label": "F12", "x": 13.5, "y": 0 }, + { "label": "Delete", "x": 15, "y": 0 }, + { "label": "EncoderClick", "x": 15.75, "y": 1.25 }, + + { "label": "~", "x": 0, "y": 1.25 }, + { "label": "1", "x": 1, "y": 1.25 }, + { "label": "2", "x": 2, "y": 1.25 }, + { "label": "3", "x": 3, "y": 1.25 }, + { "label": "4", "x": 4, "y": 1.25 }, + { "label": "5", "x": 5, "y": 1.25 }, + { "label": "6", "x": 6, "y": 1.25 }, + { "label": "7", "x": 7, "y": 1.25 }, + { "label": "8", "x": 8, "y": 1.25 }, + { "label": "9", "x": 9, "y": 1.25 }, + { "label": "0", "x": 10, "y": 1.25 }, + { "label": "-", "x": 11, "y": 1.25 }, + { "label": "=", "x": 12, "y": 1.25 }, + { "label": "Backspace", "x": 13, "y": 1.25, "w":2}, + + { "label": "Tab", "x": 0, "y": 2.25, "w": 1.5 }, + { "label": "Q", "x": 1.5, "y": 2.25 }, + { "label": "W", "x": 2.5, "y": 2.25 }, + { "label": "E", "x": 3.5, "y": 2.25 }, + { "label": "R", "x": 4.5, "y": 2.25 }, + { "label": "T", "x": 5.5, "y": 2.25 }, + { "label": "Y", "x": 6.5, "y": 2.25 }, + { "label": "U", "x": 7.5, "y": 2.25 }, + { "label": "I", "x": 8.5, "y": 2.25 }, + { "label": "O", "x": 9.5, "y": 2.25 }, + { "label": "P", "x": 10.5, "y": 2.25 }, + { "label": "[", "x": 11.5, "y": 2.25 }, + { "label": "]", "x": 12.5, "y": 2.25 }, + { "label": "\\", "x": 13.5,"y": 2.25, "w": 1.5 }, + { "label": "Home", "x": 15.25, "y": 2.25 }, + { "label": "PageUp", "x": 16.25, "y": 2.25 }, + + { "label": "Caps Lock", "x": 0, "y": 3.25, "w": 1.75 }, + { "label": "A", "x": 1.75, "y": 3.25 }, + { "label": "S", "x": 2.75, "y": 3.25 }, + { "label": "D", "x": 3.75, "y": 3.25 }, + { "label": "F", "x": 4.75, "y": 3.25 }, + { "label": "G", "x": 5.75, "y": 3.25 }, + { "label": "H", "x": 6.75, "y": 3.25 }, + { "label": "J", "x": 7.75, "y": 3.25 }, + { "label": "K", "x": 8.75, "y": 3.25 }, + { "label": "L", "x": 9.75, "y": 3.25 }, + { "label": ";", "x": 10.75, "y": 3.25 }, + { "label": "'", "x": 11.75, "y": 3.25 }, + { "label": "Enter", "x": 12.75, "y": 3.25, "w": 2.25 }, + { "label": "End", "x": 15.25, "y": 3.25 }, + { "label": "PageDown", "x": 16.25, "y": 3.25 }, + + { "label": "Shift", "x": 0, "y": 4.25, "w": 2.25 }, + { "label": "Z", "x": 2.25, "y": 4.25 }, + { "label": "X", "x": 3.25, "y": 4.25 }, + { "label": "C", "x": 4.25, "y": 4.25 }, + { "label": "V", "x": 5.25, "y": 4.25 }, + { "label": "B", "x": 6.25, "y": 4.25 }, + { "label": "N", "x": 7.25, "y": 4.25 }, + { "label": "M", "x": 8.25, "y": 4.25 }, + { "label": ",", "x": 9.25, "y": 4.25 }, + { "label": ".", "x": 10.25, "y": 4.25 }, + { "label": "/", "x": 11.25, "y": 4.25 }, + { "label": "Shift1", "x": 12.25, "y": 4.25, "w": 1.75 }, + { "label": "Shift2", "x": 14, "y": 4.25 }, + { "label": "\u2191", "x": 15.25, "y": 4.25 }, + + { "label": "Ctrl", "x": 0, "y": 5.25, "w": 1.25 }, + { "label": "Win", "x": 1.25, "y": 5.25, "w": 1.25 }, + { "label": "Alt", "x": 2.5, "y": 5.25, "w": 1.25 }, + { "label": "Space","x": 3.75, "y": 5.25, "w": 6.25 }, + { "label": "Alt", "x": 10, "y": 5.25, "w": 1.25 }, + { "label": "Ctrl", "x": 11.25, "y": 5.25, "w": 1.25 }, + { "label": "Menu", "x": 12.5, "y": 5.25, "w": 1.25 }, + { "label": "\u2190", "x": 14.25, "y": 5.25 }, + { "label": "\u2193", "x": 15.25, "y": 5.25 }, + { "label": "\u2192", "x": 16.25, "y": 5.25 } + ] + }, + "LAYOUT_75_ansi_split_bs": { + "layout": [ + { "label": "Esc", "x": 0, "y": 0 }, + { "label": "F1", "x": 1.5, "y": 0 }, + { "label": "F2", "x": 2.5, "y": 0 }, + { "label": "F3", "x": 3.5, "y": 0 }, + { "label": "F4", "x": 4.5, "y": 0 }, + { "label": "F5", "x": 6, "y": 0 }, + { "label": "F6", "x": 7, "y": 0 }, + { "label": "F7", "x": 8, "y": 0 }, + { "label": "F8", "x": 9, "y": 0 }, + { "label": "F9", "x": 10.5, "y": 0 }, + { "label": "F10", "x": 11.5, "y": 0 }, + { "label": "F11", "x": 12.5, "y": 0 }, + { "label": "F12", "x": 13.5, "y": 0 }, + { "label": "Delete", "x": 15, "y": 0 }, + { "label": "EncoderClick", "x": 15.75, "y": 1.25 }, + + { "label": "~", "x": 0, "y": 1.25 }, + { "label": "1", "x": 1, "y": 1.25 }, + { "label": "2", "x": 2, "y": 1.25 }, + { "label": "3", "x": 3, "y": 1.25 }, + { "label": "4", "x": 4, "y": 1.25 }, + { "label": "5", "x": 5, "y": 1.25 }, + { "label": "6", "x": 6, "y": 1.25 }, + { "label": "7", "x": 7, "y": 1.25 }, + { "label": "8", "x": 8, "y": 1.25 }, + { "label": "9", "x": 9, "y": 1.25 }, + { "label": "0", "x": 10, "y": 1.25 }, + { "label": "-", "x": 11, "y": 1.25 }, + { "label": "=", "x": 12, "y": 1.25 }, + { "label": "Backspace", "x": 13, "y": 1.25}, + + { "label": "Tab", "x": 0, "y": 2.25, "w": 1.5 }, + { "label": "Q", "x": 1.5, "y": 2.25 }, + { "label": "W", "x": 2.5, "y": 2.25 }, + { "label": "E", "x": 3.5, "y": 2.25 }, + { "label": "R", "x": 4.5, "y": 2.25 }, + { "label": "T", "x": 5.5, "y": 2.25 }, + { "label": "Y", "x": 6.5, "y": 2.25 }, + { "label": "U", "x": 7.5, "y": 2.25 }, + { "label": "I", "x": 8.5, "y": 2.25 }, + { "label": "O", "x": 9.5, "y": 2.25 }, + { "label": "P", "x": 10.5, "y": 2.25 }, + { "label": "[", "x": 11.5, "y": 2.25 }, + { "label": "]", "x": 12.5, "y": 2.25 }, + { "label": "\\", "x": 13.5,"y": 2.25, "w": 1.5 }, + { "label": "Home", "x": 15.25, "y": 2.25 }, + { "label": "PageUp", "x": 16.25, "y": 2.25 }, + + { "label": "Caps Lock", "x": 0, "y": 3.25, "w": 1.75 }, + { "label": "A", "x": 1.75, "y": 3.25 }, + { "label": "S", "x": 2.75, "y": 3.25 }, + { "label": "D", "x": 3.75, "y": 3.25 }, + { "label": "F", "x": 4.75, "y": 3.25 }, + { "label": "G", "x": 5.75, "y": 3.25 }, + { "label": "H", "x": 6.75, "y": 3.25 }, + { "label": "J", "x": 7.75, "y": 3.25 }, + { "label": "K", "x": 8.75, "y": 3.25 }, + { "label": "L", "x": 9.75, "y": 3.25 }, + { "label": ";", "x": 10.75, "y": 3.25 }, + { "label": "'", "x": 11.75, "y": 3.25 }, + { "label": "Enter", "x": 12.75, "y": 3.25, "w": 2.25 }, + { "label": "Backspace1", "x": 14, "y": 1.25 }, + { "label": "End", "x": 15.25, "y": 3.25 }, + { "label": "PageDown", "x": 16.25, "y": 3.25 }, + + { "label": "Shift", "x": 0, "y": 4.25, "w": 2.25 }, + { "label": "Z", "x": 2.25, "y": 4.25 }, + { "label": "X", "x": 3.25, "y": 4.25 }, + { "label": "C", "x": 4.25, "y": 4.25 }, + { "label": "V", "x": 5.25, "y": 4.25 }, + { "label": "B", "x": 6.25, "y": 4.25 }, + { "label": "N", "x": 7.25, "y": 4.25 }, + { "label": "M", "x": 8.25, "y": 4.25 }, + { "label": ",", "x": 9.25, "y": 4.25 }, + { "label": ".", "x": 10.25, "y": 4.25 }, + { "label": "/", "x": 11.25, "y": 4.25 }, + { "label": "Shift", "x": 12.25, "y": 4.25, "w": 2.75 }, + { "label": "\u2191", "x": 15.25, "y": 4.25 }, + + { "label": "Ctrl", "x": 0, "y": 5.25, "w": 1.25 }, + { "label": "Win", "x": 1.25, "y": 5.25, "w": 1.25 }, + { "label": "Alt", "x": 2.5, "y": 5.25, "w": 1.25 }, + { "label": "Space","x": 3.75, "y": 5.25, "w": 6.25 }, + { "label": "Alt", "x": 10, "y": 5.25, "w": 1.25 }, + { "label": "Ctrl", "x": 11.25, "y": 5.25, "w": 1.25 }, + { "label": "Menu", "x": 12.5, "y": 5.25, "w": 1.25 }, + { "label": "\u2190", "x": 14.25, "y": 5.25 }, + { "label": "\u2193", "x": 15.25, "y": 5.25 }, + { "label": "\u2192", "x": 16.25, "y": 5.25 } + ] + }, + "LAYOUT_75_ansi_split_space": { + "layout": [ + { "label": "Esc", "x": 0, "y": 0 }, + { "label": "F1", "x": 1.5, "y": 0 }, + { "label": "F2", "x": 2.5, "y": 0 }, + { "label": "F3", "x": 3.5, "y": 0 }, + { "label": "F4", "x": 4.5, "y": 0 }, + { "label": "F5", "x": 6, "y": 0 }, + { "label": "F6", "x": 7, "y": 0 }, + { "label": "F7", "x": 8, "y": 0 }, + { "label": "F8", "x": 9, "y": 0 }, + { "label": "F9", "x": 10.5, "y": 0 }, + { "label": "F10", "x": 11.5, "y": 0 }, + { "label": "F11", "x": 12.5, "y": 0 }, + { "label": "F12", "x": 13.5, "y": 0 }, + { "label": "Delete", "x": 15, "y": 0 }, + { "label": "EncoderClick", "x": 15.75, "y": 1.25 }, + + { "label": "~", "x": 0, "y": 1.25 }, + { "label": "1", "x": 1, "y": 1.25 }, + { "label": "2", "x": 2, "y": 1.25 }, + { "label": "3", "x": 3, "y": 1.25 }, + { "label": "4", "x": 4, "y": 1.25 }, + { "label": "5", "x": 5, "y": 1.25 }, + { "label": "6", "x": 6, "y": 1.25 }, + { "label": "7", "x": 7, "y": 1.25 }, + { "label": "8", "x": 8, "y": 1.25 }, + { "label": "9", "x": 9, "y": 1.25 }, + { "label": "0", "x": 10, "y": 1.25 }, + { "label": "-", "x": 11, "y": 1.25 }, + { "label": "=", "x": 12, "y": 1.25 }, + { "label": "Backspace", "x": 13, "y": 1.25, "w":2}, + + { "label": "Tab", "x": 0, "y": 2.25, "w": 1.5 }, + { "label": "Q", "x": 1.5, "y": 2.25 }, + { "label": "W", "x": 2.5, "y": 2.25 }, + { "label": "E", "x": 3.5, "y": 2.25 }, + { "label": "R", "x": 4.5, "y": 2.25 }, + { "label": "T", "x": 5.5, "y": 2.25 }, + { "label": "Y", "x": 6.5, "y": 2.25 }, + { "label": "U", "x": 7.5, "y": 2.25 }, + { "label": "I", "x": 8.5, "y": 2.25 }, + { "label": "O", "x": 9.5, "y": 2.25 }, + { "label": "P", "x": 10.5, "y": 2.25 }, + { "label": "[", "x": 11.5, "y": 2.25 }, + { "label": "]", "x": 12.5, "y": 2.25 }, + { "label": "\\", "x": 13.5,"y": 2.25, "w": 1.5 }, + { "label": "Home", "x": 15.25, "y": 2.25 }, + { "label": "PageUp", "x": 16.25, "y": 2.25 }, + + { "label": "Caps Lock", "x": 0, "y": 3.25, "w": 1.75 }, + { "label": "A", "x": 1.75, "y": 3.25 }, + { "label": "S", "x": 2.75, "y": 3.25 }, + { "label": "D", "x": 3.75, "y": 3.25 }, + { "label": "F", "x": 4.75, "y": 3.25 }, + { "label": "G", "x": 5.75, "y": 3.25 }, + { "label": "H", "x": 6.75, "y": 3.25 }, + { "label": "J", "x": 7.75, "y": 3.25 }, + { "label": "K", "x": 8.75, "y": 3.25 }, + { "label": "L", "x": 9.75, "y": 3.25 }, + { "label": ";", "x": 10.75, "y": 3.25 }, + { "label": "'", "x": 11.75, "y": 3.25 }, + { "label": "Enter", "x": 12.75, "y": 3.25, "w": 2.25 }, + { "label": "End", "x": 15.25, "y": 3.25 }, + { "label": "PageDown", "x": 16.25, "y": 3.25 }, + + { "label": "Shift", "x": 0, "y": 4.25, "w": 2.25 }, + { "label": "Z", "x": 2.25, "y": 4.25 }, + { "label": "X", "x": 3.25, "y": 4.25 }, + { "label": "C", "x": 4.25, "y": 4.25 }, + { "label": "V", "x": 5.25, "y": 4.25 }, + { "label": "B", "x": 6.25, "y": 4.25 }, + { "label": "N", "x": 7.25, "y": 4.25 }, + { "label": "M", "x": 8.25, "y": 4.25 }, + { "label": ",", "x": 9.25, "y": 4.25 }, + { "label": ".", "x": 10.25, "y": 4.25 }, + { "label": "/", "x": 11.25, "y": 4.25 }, + { "label": "Shift", "x": 12.25, "y": 4.25, "w": 2.75 }, + { "label": "\u2191", "x": 15.25, "y": 4.25 }, + + { "label": "Ctrl", "x": 0, "y": 5.25, "w": 1.25 }, + { "label": "Win", "x": 1.25, "y": 5.25, "w": 1.25 }, + { "label": "Alt", "x": 2.5, "y": 5.25, "w": 1.25 }, + { "label": "Space","x": 3.75, "y": 5.25, "w": 2.25 }, + { "label": "Space","x": 6, "y": 5.25, "w": 1.25 }, + { "label": "Space","x": 7.25, "y": 5.25, "w": 2.75 }, + { "label": "Alt", "x": 10, "y": 5.25, "w": 1.25 }, + { "label": "Ctrl", "x": 11.25, "y": 5.25, "w": 1.25 }, + { "label": "Menu", "x": 12.5, "y": 5.25, "w": 1.25 }, + { "label": "\u2190", "x": 14.25, "y": 5.25 }, + { "label": "\u2193", "x": 15.25, "y": 5.25 }, + { "label": "\u2192", "x": 16.25, "y": 5.25 } + ] + } + } +} diff --git a/keyboards/wuque/mammoth75x/keymaps/75_ansi/keymap.c b/keyboards/wuque/mammoth75x/keymaps/75_ansi/keymap.c new file mode 100644 index 0000000000..a35038348e --- /dev/null +++ b/keyboards/wuque/mammoth75x/keymaps/75_ansi/keymap.c @@ -0,0 +1,36 @@ +/* Copyright 2021 wuquestudio + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_75_ansi( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_MUTE, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_INS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_END, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_75_ansi( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; diff --git a/keyboards/wuque/mammoth75x/keymaps/75_ansi/readme.md b/keyboards/wuque/mammoth75x/keymaps/75_ansi/readme.md new file mode 100644 index 0000000000..b6b384197a --- /dev/null +++ b/keyboards/wuque/mammoth75x/keymaps/75_ansi/readme.md @@ -0,0 +1 @@ +# The 75_ansi keymap for mammoth75x diff --git a/keyboards/wuque/mammoth75x/keymaps/75_split_bs/keymap.c b/keyboards/wuque/mammoth75x/keymaps/75_split_bs/keymap.c new file mode 100644 index 0000000000..c1717e6d22 --- /dev/null +++ b/keyboards/wuque/mammoth75x/keymaps/75_split_bs/keymap.c @@ -0,0 +1,36 @@ +/* Copyright 2021 wuquestudio + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_75_ansi_split_bs( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_MUTE, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_INS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_BSPC, KC_END, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_75_ansi_split_bs( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; diff --git a/keyboards/wuque/mammoth75x/keymaps/75_split_bs/readme.md b/keyboards/wuque/mammoth75x/keymaps/75_split_bs/readme.md new file mode 100644 index 0000000000..ef0bf98c57 --- /dev/null +++ b/keyboards/wuque/mammoth75x/keymaps/75_split_bs/readme.md @@ -0,0 +1 @@ +# The 75_split_bs keymap for mammoth75x diff --git a/keyboards/wuque/mammoth75x/keymaps/75_split_lshift/keymap.c b/keyboards/wuque/mammoth75x/keymaps/75_split_lshift/keymap.c new file mode 100644 index 0000000000..611e1a2642 --- /dev/null +++ b/keyboards/wuque/mammoth75x/keymaps/75_split_lshift/keymap.c @@ -0,0 +1,36 @@ +/* Copyright 2021 wuquestudio + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_75_ansi_split_lshift( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_MUTE, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_INS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_END, KC_PGDN, + KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_75_ansi_split_lshift( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; diff --git a/keyboards/wuque/mammoth75x/keymaps/75_split_lshift/readme.md b/keyboards/wuque/mammoth75x/keymaps/75_split_lshift/readme.md new file mode 100644 index 0000000000..cd6640f912 --- /dev/null +++ b/keyboards/wuque/mammoth75x/keymaps/75_split_lshift/readme.md @@ -0,0 +1 @@ +# The 75_split_lshift keymap for mammoth75x diff --git a/keyboards/wuque/mammoth75x/keymaps/75_split_rshift/keymap.c b/keyboards/wuque/mammoth75x/keymaps/75_split_rshift/keymap.c new file mode 100644 index 0000000000..1debfe81b7 --- /dev/null +++ b/keyboards/wuque/mammoth75x/keymaps/75_split_rshift/keymap.c @@ -0,0 +1,36 @@ +/* Copyright 2021 wuquestudio + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_75_ansi_split_rshift( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_MUTE, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_INS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_END, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_75_ansi_split_rshift( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; diff --git a/keyboards/wuque/mammoth75x/keymaps/75_split_rshift/readme.md b/keyboards/wuque/mammoth75x/keymaps/75_split_rshift/readme.md new file mode 100644 index 0000000000..cd6640f912 --- /dev/null +++ b/keyboards/wuque/mammoth75x/keymaps/75_split_rshift/readme.md @@ -0,0 +1 @@ +# The 75_split_lshift keymap for mammoth75x diff --git a/keyboards/wuque/mammoth75x/keymaps/75_split_space/keymap.c b/keyboards/wuque/mammoth75x/keymaps/75_split_space/keymap.c new file mode 100644 index 0000000000..2182216060 --- /dev/null +++ b/keyboards/wuque/mammoth75x/keymaps/75_split_space/keymap.c @@ -0,0 +1,36 @@ +/* Copyright 2021 wuquestudio + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_75_ansi_split_space( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_MUTE, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_INS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_END, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_75_ansi_split_space( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; diff --git a/keyboards/wuque/mammoth75x/keymaps/75_split_space/readme.md b/keyboards/wuque/mammoth75x/keymaps/75_split_space/readme.md new file mode 100644 index 0000000000..c2057660f9 --- /dev/null +++ b/keyboards/wuque/mammoth75x/keymaps/75_split_space/readme.md @@ -0,0 +1 @@ +# The 75_split_space keymap for mammoth75x diff --git a/keyboards/wuque/mammoth75x/keymaps/default/keymap.c b/keyboards/wuque/mammoth75x/keymaps/default/keymap.c new file mode 100644 index 0000000000..9f998a3dd6 --- /dev/null +++ b/keyboards/wuque/mammoth75x/keymaps/default/keymap.c @@ -0,0 +1,36 @@ +/* Copyright 2021 wuquestudio + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_VOLD, KC_MUTE,KC_VOLU, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_INS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_BSPC, KC_END, KC_PGDN, + KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; diff --git a/keyboards/wuque/mammoth75x/keymaps/default/readme.md b/keyboards/wuque/mammoth75x/keymaps/default/readme.md new file mode 100644 index 0000000000..73cba9c7b9 --- /dev/null +++ b/keyboards/wuque/mammoth75x/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for mammoth75x diff --git a/keyboards/wuque/mammoth75x/keymaps/via/keymap.c b/keyboards/wuque/mammoth75x/keymaps/via/keymap.c new file mode 100644 index 0000000000..d35ff6bccc --- /dev/null +++ b/keyboards/wuque/mammoth75x/keymaps/via/keymap.c @@ -0,0 +1,52 @@ +/* Copyright 2021 wuquestudio + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_VOLD, KC_MUTE,KC_VOLU, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_INS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_BSPC, KC_END, KC_PGDN, + KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [2] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [3] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; diff --git a/keyboards/wuque/mammoth75x/keymaps/via/readme.md b/keyboards/wuque/mammoth75x/keymaps/via/readme.md new file mode 100644 index 0000000000..e6ea1cf87d --- /dev/null +++ b/keyboards/wuque/mammoth75x/keymaps/via/readme.md @@ -0,0 +1 @@ +# The via keymap for mammoth75x diff --git a/keyboards/wuque/mammoth75x/keymaps/via/rules.mk b/keyboards/wuque/mammoth75x/keymaps/via/rules.mk new file mode 100644 index 0000000000..36b7ba9cbc --- /dev/null +++ b/keyboards/wuque/mammoth75x/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/wuque/mammoth75x/mammoth75x.c b/keyboards/wuque/mammoth75x/mammoth75x.c new file mode 100644 index 0000000000..6f14657f88 --- /dev/null +++ b/keyboards/wuque/mammoth75x/mammoth75x.c @@ -0,0 +1,67 @@ +/* Copyright 2021 wuquestudio + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "mammoth75x.h" + +#ifdef VIA_ENABLE +static uint8_t encoder_state[ENCODERS] = {0}; +static keypos_t encoder_cw[ENCODERS] = ENCODERS_CW_KEY; +static keypos_t encoder_ccw[ENCODERS] = ENCODERS_CCW_KEY; + +void encoder_action_unregister(void) +{ + for (int index = 0; index < ENCODERS; ++index) + { + if (encoder_state[index]) + { + keyevent_t encoder_event = (keyevent_t){ + .key = encoder_state[index] >> 1 ? encoder_cw[index] : encoder_ccw[index], + .pressed = false, + .time = (timer_read() | 1)}; + encoder_state[index] = 0; + action_exec(encoder_event); + } + } +} +void encoder_action_register(uint8_t index, bool clockwise) +{ + keyevent_t encoder_event = (keyevent_t){ + .key = clockwise ? encoder_cw[index] : encoder_ccw[index], + .pressed = true, + .time = (timer_read() | 1)}; + encoder_state[index] = (clockwise ^ 1) | (clockwise << 1); + action_exec(encoder_event); +} + +void matrix_scan_kb(void) +{ + encoder_action_unregister(); + matrix_scan_user(); +} + +bool encoder_update_kb(uint8_t index, bool clockwise) +{ + encoder_action_register(index, clockwise); + return true; +}; +#else +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + tap_code_delay(clockwise ? KC_VOLU : KC_VOLD, 10); + return true; +} +#endif + diff --git a/keyboards/wuque/mammoth75x/mammoth75x.h b/keyboards/wuque/mammoth75x/mammoth75x.h new file mode 100644 index 0000000000..a3ab71caa1 --- /dev/null +++ b/keyboards/wuque/mammoth75x/mammoth75x.h @@ -0,0 +1,223 @@ +/* Copyright 2021 wuquestudio + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + + +/* Standard Arrangement + * ┌───┐┌───┬───┬───┬───┐┌───┬───┬───┬───┐┌───┬───┬───┬───┐┌───┐ + * │00 ││01 │02 │03 │04 ││05 │06 │07 │08 ││09 │0a │0b │0c ││0d │ + * └───┘└───┴───┴───┴───┘└───┴───┴───┴───┘└───┴───┴───┴───┘└───┘ + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ ◯ + * │10 │11 │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │3d │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤ ┌───┬───┐ + * │20 │21 │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │2d │ │2e │2f │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ ├───┼───┤ + * │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3c │ │3e │3f │ + * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤ └───┴───┘ + * │40 │41 │42 │43 │44 │45 │46 │47 │48 │49 │4a │4b │4c │4d │ ┌───┐ + * ├────┼───┴┬──┴─┬─┴───┴──┬┴───┼───┴───┴──┬┴───┼───┴┬────┬┴───┘ │4e │ + * │50 │51 │52 │54 │56 │58 │5a │5b │5c │ ┌───┼───┼───┐ + * └────┴────┴────┴────────┴────┴──────────┴────┴────┴────┘ │5d │5e │5f │ + * └───┴───┴───┘ + */ +#define LAYOUT_all( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K53, K0E, K55, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, K3F, \ + K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E, \ + K50, K51, K52, K54, K56, K58, K5A, K5B, K5C, K5D, K5E, K5F \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, KC_NO }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, KC_NO, KC_NO }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, K3F }, \ + { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E, KC_NO }, \ + { K50, K51, K52, K53, K54, K55, K56, KC_NO, K58, KC_NO, K5A, K5B, K5C, K5D, K5E, K5F }, \ +} + + +/* LAYOUT_75_ansi + * ┌───┐┌───┬───┬───┬───┐┌───┬───┬───┬───┐┌───┬───┬───┬───┐┌───┐ + * │00 ││01 │02 │03 │04 ││05 │06 │07 │08 ││09 │0a │0b │0c ││0d │ + * └───┘└───┴───┴───┴───┘└───┴───┴───┴───┘└───┴───┴───┴───┘└───┘ + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ ◯ + * │10 │11 │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ ┌───┬───┐ + * │20 │21 │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │2d │ │2e │2f │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ ├───┼───┤ + * │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3c │ │3e │3f │ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────────┤ └───┴───┘ + * │40 │42 │43 │44 │45 │46 │47 │48 │49 │4a │4b │4c │ ┌───┐ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┘ │4e │ + * │50 │51 │52 │56 │5a │5b │5c │ ┌───┼───┼───┐ + * └────┴────┴────┴────────────────────────┴────┴────┴────┘ │5d │5e │5f │ + * └───┴───┴───┘ + */ +#define LAYOUT_75_ansi( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3E, K3F, \ + K40, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4E, \ + K50, K51, K52, K56, K5A, K5B, K5C, K5D, K5E, K5F \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, KC_NO }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, KC_NO, KC_NO }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, KC_NO, K3E, K3F }, \ + { K40, KC_NO, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, KC_NO, K4E, KC_NO }, \ + { K50, K51, K52, KC_NO, KC_NO, KC_NO, K56, KC_NO, KC_NO, KC_NO, K5A, K5B, K5C, K5D, K5E, K5F }, \ +} + + +/* LAYOUT_75_ansi_split_lshift + * ┌───┐┌───┬───┬───┬───┐┌───┬───┬───┬───┐┌───┬───┬───┬───┐┌───┐ + * │00 ││01 │02 │03 │04 ││05 │06 │07 │08 ││09 │0a │0b │0c ││0d │ + * └───┘└───┴───┴───┴───┘└───┴───┴───┴───┘└───┴───┴───┴───┘└───┘ + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ ◯ + * │10 │11 │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ ┌───┬───┐ + * │20 │21 │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │2d │ │2e │2f │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ ├───┼───┤ + * │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3c │ │3e │3f │ + * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────────┤ └───┴───┘ + * │40 │41 │42 │43 │44 │45 │46 │47 │48 │49 │4a │4b │4c │ ┌───┐ + * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┘ │4e │ + * │50 │51 │52 │56 │5a │5b │5c │ ┌───┼───┼───┐ + * └────┴────┴────┴────────────────────────┴────┴────┴────┘ │5d │5e │5f │ + * └───┴───┴───┘ + */ +#define LAYOUT_75_ansi_split_lshift( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3E, K3F, \ + K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4E, \ + K50, K51, K52, K56, K5A, K5B, K5C, K5D, K5E, K5F \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, KC_NO }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, KC_NO, KC_NO }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, KC_NO, K3E, K3F }, \ + { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, KC_NO, K4E, KC_NO }, \ + { K50, K51, K52, KC_NO, KC_NO, KC_NO, K56, KC_NO, KC_NO, KC_NO, K5A, K5B, K5C, K5D, K5E, K5F }, \ +} + + +/* LAYOUT_75_ansi_split_rshift + * ┌───┐┌───┬───┬───┬───┐┌───┬───┬───┬───┐┌───┬───┬───┬───┐┌───┐ + * │00 ││01 │02 │03 │04 ││05 │06 │07 │08 ││09 │0a │0b │0c ││0d │ + * └───┘└───┴───┴───┴───┘└───┴───┴───┴───┘└───┴───┴───┴───┘└───┘ + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ ◯ + * │10 │11 │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ ┌───┬───┐ + * │20 │21 │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │2d │ │2e │2f │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ ├───┼───┤ + * │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3c │ │3e │3f │ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤ └───┴───┘ + * │40 │42 │43 │44 │45 │46 │47 │48 │49 │4a │4b │4c │4d │ ┌───┐ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬┴───┘ │4e │ + * │50 │51 │52 │56 │5a │5b │5c │ ┌───┼───┼───┐ + * └────┴────┴────┴────────────────────────┴────┴────┴────┘ │5d │5e │5f │ + * └───┴───┴───┘ + */ +#define LAYOUT_75_ansi_split_rshift( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3E, K3F, \ + K40, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E, \ + K50, K51, K52, K56, K5A, K5B, K5C, K5D, K5E, K5F \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, KC_NO }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, KC_NO, KC_NO }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, KC_NO, K3E, K3F }, \ + { K40, KC_NO, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E, KC_NO }, \ + { K50, K51, K52, KC_NO, KC_NO, KC_NO, K56, KC_NO, KC_NO, KC_NO, K5A, K5B, K5C, K5D, K5E, K5F }, \ +} + + +/* LAYOUT_75_ansi_split_bs + * ┌───┐┌───┬───┬───┬───┐┌───┬───┬───┬───┐┌───┬───┬───┬───┐┌───┐ + * │00 ││01 │02 │03 │04 ││05 │06 │07 │08 ││09 │0a │0b │0c ││0d │ + * └───┘└───┴───┴───┴───┘└───┴───┴───┴───┘└───┴───┴───┴───┘└───┘ + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ ◯ + * │10 │11 │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │3d │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤ ┌───┬───┐ + * │20 │21 │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │2d │ │2e │2f │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ ├───┼───┤ + * │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3c │ │3e │3f │ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────────┤ └───┴───┘ + * │40 │42 │43 │44 │45 │46 │47 │48 │49 │4a │4b │4c │ ┌───┐ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┘ │4e │ + * │50 │51 │52 │56 │5a │5b │5c │ ┌───┼───┼───┐ + * └────┴────┴────┴────────────────────────┴────┴────┴────┘ │5d │5e │5f │ + * └───┴───┴───┘ + */ +#define LAYOUT_75_ansi_split_bs( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, K3F, \ + K40, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4E, \ + K50, K51, K52, K56, K5A, K5B, K5C, K5D, K5E, K5F \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, KC_NO }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, KC_NO, KC_NO }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, K3F }, \ + { K40, KC_NO, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, KC_NO, K4E, KC_NO }, \ + { K50, K51, K52, KC_NO, KC_NO, KC_NO, K56, KC_NO, KC_NO, KC_NO, K5A, K5B, K5C, K5D, K5E, K5F }, \ +} + + +/* LAYOUT_75_ansi_split_space + * ┌───┐┌───┬───┬───┬───┐┌───┬───┬───┬───┐┌───┬───┬───┬───┐┌───┐ + * │00 ││01 │02 │03 │04 ││05 │06 │07 │08 ││09 │0a │0b │0c ││0d │ + * └───┘└───┴───┴───┴───┘└───┴───┴───┴───┘└───┴───┴───┴───┘└───┘ + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ ◯ + * │10 │11 │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ ┌───┬───┐ + * │20 │21 │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │2d │ │2e │2f │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ ├───┼───┤ + * │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3c │ │3e │3f │ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────────┤ └───┴───┘ + * │40 │42 │43 │44 │45 │46 │47 │48 │49 │4a │4b │4c │ ┌───┐ + * ├────┬───┴┬──┴─┬─┴───┴──┬┴───┼───┴───┴──┬┴───┼───┴┬────┬────┘ │4e │ + * │50 │51 │52 │54 │56 │58 │5a │5b │5c │ ┌───┼───┼───┐ + * └────┴────┴────┴────────┴────┴──────────┴────┴────┴────┘ │5d │5e │5f │ + * └───┴───┴───┘ + */ +#define LAYOUT_75_ansi_split_space( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3E, K3F, \ + K40, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4E, \ + K50, K51, K52, K54, K56, K58, K5A, K5B, K5C, K5D, K5E, K5F \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, KC_NO }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, KC_NO, KC_NO }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, KC_NO, K3E, K3F }, \ + { K40, KC_NO, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, KC_NO, K4E, KC_NO }, \ + { K50, K51, K52, KC_NO, K54, KC_NO, K56, KC_NO, K58, KC_NO, K5A, K5B, K5C, K5D, K5E, K5F }, \ +} diff --git a/keyboards/wuque/mammoth75x/readme.md b/keyboards/wuque/mammoth75x/readme.md new file mode 100644 index 0000000000..9528552fb1 --- /dev/null +++ b/keyboards/wuque/mammoth75x/readme.md @@ -0,0 +1,25 @@ +# mammoth75x +​ +![mammoth75x](https://i.imgur.com/mhIKh2P.jpeg) +​ +More Info at [wuquestudio](https://shop.wuquestudio.com/). +​ +* Keyboard Maintainer: [spbgzh](https://github.com/spbgzh) +* Hardware Supported: mammoth75x Standard +* Hardware Availability: [mammoth75x](https://shop.wuquestudio.com/) +​ +Make example for this keyboard (after setting up your build environment): + + make wuque/mammoth75x:default + +Flashing example for this keyboard: + + make wuque/mammoth75x:default:flash + +To reset the board into bootloader mode, do one of the following: + +* Tap the Reset switch mounted on the PCB +* In the case of the default keymap, use the key combination Fn + PageUp +* Hold the Esc key while connecting the USB cable (also erases persistent settings) + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/wuque/mammoth75x/rules.mk b/keyboards/wuque/mammoth75x/rules.mk new file mode 100644 index 0000000000..d34c14e73f --- /dev/null +++ b/keyboards/wuque/mammoth75x/rules.mk @@ -0,0 +1,22 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +ENCODER_ENABLE = yes # Enable Encoder From 0f96364daf418c395e583ae639fdd74e71c74142 Mon Sep 17 00:00:00 2001 From: David Martinz Date: Tue, 26 Oct 2021 20:05:37 -0300 Subject: [PATCH 341/595] [Keymap] Adding a new keymap for bm60poker and some led configs (#14918) --- .../bm60poker/keymaps/david/keymap.c | 58 +++++++++++++++++++ 1 file changed, 58 insertions(+) create mode 100644 keyboards/kprepublic/bm60poker/keymaps/david/keymap.c diff --git a/keyboards/kprepublic/bm60poker/keymaps/david/keymap.c b/keyboards/kprepublic/bm60poker/keymaps/david/keymap.c new file mode 100644 index 0000000000..5050b25a90 --- /dev/null +++ b/keyboards/kprepublic/bm60poker/keymaps/david/keymap.c @@ -0,0 +1,58 @@ +/* Copyright 2021 David Martinz + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_60_ansi(KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, + KC_RSFT, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL), + [1] = LAYOUT_60_ansi(KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + RESET, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_UP, KC_INS, KC_HOME, KC_END, + KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_PGDN, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) +}; + +#ifdef RGB_MATRIX_ENABLE +void rgb_matrix_indicators_advanced_user(uint8_t led_min, uint8_t led_max) { + // caps lock white + if (host_keyboard_led_state().caps_lock) { + RGB_MATRIX_INDICATOR_SET_COLOR(28, 200, 200, 200); + } + + // layer state + switch (get_highest_layer(layer_state)) { + case 0: + // RGB_MATRIX_INDICATOR_SET_COLOR(59, 0, 0, 0); + break; + case 1: + RGB_MATRIX_INDICATOR_SET_COLOR(59, 128, 0, 0); + break; + case 2: + RGB_MATRIX_INDICATOR_SET_COLOR(59, 0, 128, 0); + break; + case 3: + RGB_MATRIX_INDICATOR_SET_COLOR(59, 0, 0, 128); + break; + default: + // white + RGB_MATRIX_INDICATOR_SET_COLOR(59, 128, 128, 128); + break; + } +} +#endif From 015c4cf5beab530916b6c539583f9b7179bf42d3 Mon Sep 17 00:00:00 2001 From: MasterSpoon <84671859+MasterSpoon@users.noreply.github.com> Date: Wed, 27 Oct 2021 09:10:48 +1000 Subject: [PATCH 342/595] Update mcu_selection.mk with current ChibiOS path (#14909) --- quantum/mcu_selection.mk | 25 ++++++++++++------------- 1 file changed, 12 insertions(+), 13 deletions(-) diff --git a/quantum/mcu_selection.mk b/quantum/mcu_selection.mk index f7eaeec8ac..3b86433a86 100644 --- a/quantum/mcu_selection.mk +++ b/quantum/mcu_selection.mk @@ -122,7 +122,7 @@ ifneq ($(findstring STM32F042, $(MCU)),) MCU_SERIES = STM32F0xx # Linker script to use - # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ + # - it should exist either in /os/common/startup/ARMCMx/compilers/GCC/ld/ # or /ld/ MCU_LDSCRIPT ?= STM32F042x6 @@ -154,7 +154,7 @@ ifneq ($(findstring STM32F072, $(MCU)),) MCU_SERIES = STM32F0xx # Linker script to use - # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ + # - it should exist either in /os/common/startup/ARMCMx/compilers/GCC/ld/ # or /ld/ MCU_LDSCRIPT ?= STM32F072xB @@ -186,7 +186,7 @@ ifneq ($(findstring STM32F103, $(MCU)),) MCU_SERIES = STM32F1xx # Linker script to use - # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ + # - it should exist either in /os/common/startup/ARMCMx/compilers/GCC/ld/ # or /ld/ MCU_LDSCRIPT ?= STM32F103x8 @@ -218,7 +218,7 @@ ifneq ($(findstring STM32F303, $(MCU)),) MCU_SERIES = STM32F3xx # Linker script to use - # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ + # - it should exist either in /os/common/startup/ARMCMx/compilers/GCC/ld/ # or /ld/ MCU_LDSCRIPT ?= STM32F303xC @@ -250,7 +250,7 @@ ifneq ($(findstring STM32F401, $(MCU)),) MCU_SERIES = STM32F4xx # Linker script to use - # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ + # - it should exist either in /os/common/startup/ARMCMx/compilers/GCC/ld/ # or /ld/ ifeq ($(strip $(BOOTLOADER)), tinyuf2) MCU_LDSCRIPT ?= STM32F401xC_tinyuf2 @@ -287,7 +287,7 @@ ifneq ($(findstring STM32F407, $(MCU)),) MCU_SERIES = STM32F4xx # Linker script to use - # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ + # - it should exist either in /os/common/startup/ARMCMx/compilers/GCC/ld/ # or /ld/ MCU_LDSCRIPT ?= STM32F407xE @@ -319,7 +319,7 @@ ifneq ($(findstring STM32F411, $(MCU)),) MCU_SERIES = STM32F4xx # Linker script to use - # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ + # - it should exist either in /os/common/startup/ARMCMx/compilers/GCC/ld/ # or /ld/ ifeq ($(strip $(BOOTLOADER)), tinyuf2) MCU_LDSCRIPT ?= STM32F411xE_tinyuf2 @@ -356,8 +356,7 @@ ifneq ($(findstring STM32F446, $(MCU)),) MCU_SERIES = STM32F4xx # Linker script to use - # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ - # or /os/common/startup/ARMCMx/compilers/GCC/ld/ + # - it should exist either in /os/common/startup/ARMCMx/compilers/GCC/ld/ # or /ld/ MCU_LDSCRIPT ?= STM32F446xE @@ -386,7 +385,7 @@ ifneq ($(findstring STM32G431, $(MCU)),) MCU_SERIES = STM32G4xx # Linker script to use - # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ + # - it should exist either in /os/common/startup/ARMCMx/compilers/GCC/ld/ # or /ld/ MCU_LDSCRIPT ?= STM32G431xB @@ -418,7 +417,7 @@ ifneq ($(findstring STM32G474, $(MCU)),) MCU_SERIES = STM32G4xx # Linker script to use - # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ + # - it should exist either in /os/common/startup/ARMCMx/compilers/GCC/ld/ # or /ld/ MCU_LDSCRIPT ?= STM32G474xE @@ -450,7 +449,7 @@ ifneq (,$(filter $(MCU),STM32L433 STM32L443)) MCU_SERIES = STM32L4xx # Linker script to use - # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ + # - it should exist either in /os/common/startup/ARMCMx/compilers/GCC/ld/ # or /ld/ MCU_LDSCRIPT ?= STM32L432xC @@ -484,7 +483,7 @@ ifneq (,$(filter $(MCU),STM32L412 STM32L422)) MCU_SERIES = STM32L4xx # Linker script to use - # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ + # - it should exist either in /os/common/startup/ARMCMx/compilers/GCC/ld/ # or /ld/ MCU_LDSCRIPT ?= STM32L412xB From e90e633c3bc45b0abca3c194d1dc231956230138 Mon Sep 17 00:00:00 2001 From: MakotoKurauchi Date: Wed, 27 Oct 2021 08:28:41 +0900 Subject: [PATCH 343/595] [Keymap] Add via keymap for meishi2 (#14892) Co-authored-by: Ryan --- keyboards/meishi2/keymaps/via/keymap.c | 31 ++++++++++++++++++++++++++ keyboards/meishi2/keymaps/via/rules.mk | 3 +++ 2 files changed, 34 insertions(+) create mode 100644 keyboards/meishi2/keymaps/via/keymap.c create mode 100644 keyboards/meishi2/keymaps/via/rules.mk diff --git a/keyboards/meishi2/keymaps/via/keymap.c b/keyboards/meishi2/keymaps/via/keymap.c new file mode 100644 index 0000000000..be706ea09a --- /dev/null +++ b/keyboards/meishi2/keymaps/via/keymap.c @@ -0,0 +1,31 @@ +/* Copyright 2019 Biacco42 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( /* Base */ + LCTL(KC_Z), LCTL(KC_X), LCTL(KC_C), LCTL(KC_V) + ), + [1] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [2] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [3] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), +}; diff --git a/keyboards/meishi2/keymaps/via/rules.mk b/keyboards/meishi2/keymaps/via/rules.mk new file mode 100644 index 0000000000..c859353a46 --- /dev/null +++ b/keyboards/meishi2/keymaps/via/rules.mk @@ -0,0 +1,3 @@ +VIA_ENABLE = yes +CONSOLE_ENABLE = no +COMMAND_ENABLE = no From 2938c4e0594778ccf8b3a72f7e2cbb357bd67ede Mon Sep 17 00:00:00 2001 From: npspears <40127181+npspears@users.noreply.github.com> Date: Tue, 26 Oct 2021 18:34:21 -0500 Subject: [PATCH 344/595] [Keyboard] add support for Phoenix45_Ortho PCB (#14798) Co-authored-by: Drashna Jaelre --- .../checkerboards/phoenix45_ortho/config.h | 52 +++++++++++++++++ .../checkerboards/phoenix45_ortho/info.json | 16 +++++ .../phoenix45_ortho/keymaps/2x3u/config.h | 19 ++++++ .../phoenix45_ortho/keymaps/2x3u/keymap.c | 46 +++++++++++++++ .../phoenix45_ortho/keymaps/6u/config.h | 19 ++++++ .../phoenix45_ortho/keymaps/6u/keymap.c | 46 +++++++++++++++ .../phoenix45_ortho/keymaps/default/config.h | 19 ++++++ .../phoenix45_ortho/keymaps/default/keymap.c | 46 +++++++++++++++ .../phoenix45_ortho/keymaps/via/config.h | 19 ++++++ .../phoenix45_ortho/keymaps/via/keymap.c | 52 +++++++++++++++++ .../phoenix45_ortho/keymaps/via/rules.mk | 1 + .../phoenix45_ortho/phoenix45_ortho.c | 29 ++++++++++ .../phoenix45_ortho/phoenix45_ortho.h | 58 +++++++++++++++++++ .../checkerboards/phoenix45_ortho/readme.md | 17 ++++++ .../checkerboards/phoenix45_ortho/rules.mk | 26 +++++++++ 15 files changed, 465 insertions(+) create mode 100644 keyboards/checkerboards/phoenix45_ortho/config.h create mode 100644 keyboards/checkerboards/phoenix45_ortho/info.json create mode 100644 keyboards/checkerboards/phoenix45_ortho/keymaps/2x3u/config.h create mode 100644 keyboards/checkerboards/phoenix45_ortho/keymaps/2x3u/keymap.c create mode 100644 keyboards/checkerboards/phoenix45_ortho/keymaps/6u/config.h create mode 100644 keyboards/checkerboards/phoenix45_ortho/keymaps/6u/keymap.c create mode 100644 keyboards/checkerboards/phoenix45_ortho/keymaps/default/config.h create mode 100644 keyboards/checkerboards/phoenix45_ortho/keymaps/default/keymap.c create mode 100644 keyboards/checkerboards/phoenix45_ortho/keymaps/via/config.h create mode 100644 keyboards/checkerboards/phoenix45_ortho/keymaps/via/keymap.c create mode 100644 keyboards/checkerboards/phoenix45_ortho/keymaps/via/rules.mk create mode 100644 keyboards/checkerboards/phoenix45_ortho/phoenix45_ortho.c create mode 100644 keyboards/checkerboards/phoenix45_ortho/phoenix45_ortho.h create mode 100644 keyboards/checkerboards/phoenix45_ortho/readme.md create mode 100644 keyboards/checkerboards/phoenix45_ortho/rules.mk diff --git a/keyboards/checkerboards/phoenix45_ortho/config.h b/keyboards/checkerboards/phoenix45_ortho/config.h new file mode 100644 index 0000000000..ebd954be33 --- /dev/null +++ b/keyboards/checkerboards/phoenix45_ortho/config.h @@ -0,0 +1,52 @@ +/* Copyright 2021 Nathan Spears + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x7070 +#define PRODUCT_ID 0x1849 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Nasp +#define PRODUCT PHOENIX45_ORTHO + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 13 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { D2, D1, D0, C4 } +#define MATRIX_COL_PINS { D3, C2, C5, B0, D6, D5, D4, B4, B5, B6, B7, C7, C6 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* encoder pads */ +#define ENCODERS_PAD_A { B1 } +#define ENCODERS_PAD_B { B2 } +#define ENCODER_RESOLUTION 4 diff --git a/keyboards/checkerboards/phoenix45_ortho/info.json b/keyboards/checkerboards/phoenix45_ortho/info.json new file mode 100644 index 0000000000..f5c02caeff --- /dev/null +++ b/keyboards/checkerboards/phoenix45_ortho/info.json @@ -0,0 +1,16 @@ +{ + "keyboard_name": "Phoenix45_Ortho", + "url": "www.checkerboards.xyz", + "maintainer": "nasp", + "layouts": { + "LAYOUT_ortho_2x225u": { + "layout": [{"label":"Tab", "x":0, "y":0}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"x":11, "y":0}, {"label":"Back Space", "x":12, "y":0}, {"label":"Esc", "x":0, "y":1}, {"label":"A", "x":1, "y":1}, {"label":"S", "x":2, "y":1}, {"label":"D", "x":3, "y":1}, {"label":"F", "x":4, "y":1}, {"label":"G", "x":5, "y":1}, {"label":"H", "x":6, "y":1}, {"label":"J", "x":7, "y":1}, {"label":"K", "x":8, "y":1}, {"label":"L", "x":9, "y":1}, {"label":";", "x":10, "y":1}, {"x":11, "y":1}, {"label":"'", "x":12, "y":1}, {"label":"Shift", "x":0, "y":2}, {"label":"Z", "x":1, "y":2}, {"label":"X", "x":2, "y":2}, {"label":"C", "x":3, "y":2}, {"label":"V", "x":4, "y":2}, {"label":"B", "x":5, "y":2}, {"label":"N", "x":6, "y":2}, {"label":"M", "x":7, "y":2}, {"label":",", "x":8, "y":2}, {"label":".", "x":9, "y":2}, {"label":"/", "x":10, "y":2}, {"x":11, "y":2}, {"label":"Return", "x":12, "y":2}, {"label":"Hyper", "x":0, "y":3, "w":1.25}, {"label":"Super", "x":1.25, "y":3}, {"label":"Meta", "x":2.25, "y":3, "w":1.5}, {"x":3.75, "y":3, "w":2.25}, {"label":"Fn", "x":6, "y":3}, {"x":7, "y":3, "w":2.25}, {"label":"Meta", "x":9.25, "y":3, "w":1.5}, {"label":"Super", "x":10.75, "y":3}, {"label":"Hyper", "x":11.75, "y":3, "w":1.25}] + }, + "LAYOUT_ortho_2x3u": { + "layout": [{"label":"Tab", "x":0, "y":0}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"x":11, "y":0}, {"label":"Back Space", "x":12, "y":0}, {"label":"Esc", "x":0, "y":1}, {"label":"A", "x":1, "y":1}, {"label":"S", "x":2, "y":1}, {"label":"D", "x":3, "y":1}, {"label":"F", "x":4, "y":1}, {"label":"G", "x":5, "y":1}, {"label":"H", "x":6, "y":1}, {"label":"J", "x":7, "y":1}, {"label":"K", "x":8, "y":1}, {"label":"L", "x":9, "y":1}, {"label":";", "x":10, "y":1}, {"x":11, "y":1}, {"label":"'", "x":12, "y":1}, {"label":"Shift", "x":0, "y":2}, {"label":"Z", "x":1, "y":2}, {"label":"X", "x":2, "y":2}, {"label":"C", "x":3, "y":2}, {"label":"V", "x":4, "y":2}, {"label":"B", "x":5, "y":2}, {"label":"N", "x":6, "y":2}, {"label":"M", "x":7, "y":2}, {"label":",", "x":8, "y":2}, {"label":".", "x":9, "y":2}, {"label":"/", "x":10, "y":2}, {"x":11, "y":2}, {"label":"Return", "x":12, "y":2}, {"label":"Hyper", "x":0, "y":3, "w":1.25}, {"label":"Super", "x":1.25, "y":3}, {"label":"Meta", "x":2.25, "y":3, "w":1.25}, {"x":3.5, "y":3, "w":3}, {"x":6.5, "y":3, "w":3}, {"label":"Meta", "x":9.5, "y":3, "w":1.25}, {"label":"Super", "x":10.75, "y":3}, {"label":"Hyper", "x":11.75, "y":3, "w":1.25}] + }, +"LAYOUT_ortho_6u": { + "layout": [{"label":"Tab", "x":0, "y":0}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"x":11, "y":0}, {"label":"Back Space", "x":12, "y":0}, {"label":"Esc", "x":0, "y":1}, {"label":"A", "x":1, "y":1}, {"label":"S", "x":2, "y":1}, {"label":"D", "x":3, "y":1}, {"label":"F", "x":4, "y":1}, {"label":"G", "x":5, "y":1}, {"label":"H", "x":6, "y":1}, {"label":"J", "x":7, "y":1}, {"label":"K", "x":8, "y":1}, {"label":"L", "x":9, "y":1}, {"label":";", "x":10, "y":1}, {"x":11, "y":1}, {"label":"'", "x":12, "y":1}, {"label":"Shift", "x":0, "y":2}, {"label":"Z", "x":1, "y":2}, {"label":"X", "x":2, "y":2}, {"label":"C", "x":3, "y":2}, {"label":"V", "x":4, "y":2}, {"label":"B", "x":5, "y":2}, {"label":"N", "x":6, "y":2}, {"label":"M", "x":7, "y":2}, {"label":",", "x":8, "y":2}, {"label":".", "x":9, "y":2}, {"label":"/", "x":10, "y":2}, {"x":11, "y":2}, {"label":"Return", "x":12, "y":2}, {"label":"Hyper", "x":0, "y":3, "w":1.25}, {"label":"Super", "x":1.25, "y":3}, {"label":"Meta", "x":2.25, "y":3, "w":1.25}, {"label":"", "x":3.5, "y":3, "w":6}, {"label":"Meta", "x":9.5, "y":3, "w":1.25}, {"label":"Super", "x":10.75, "y":3}, {"label":"Hyper", "x":11.75, "y":3, "w":1.25}] + } + } +} \ No newline at end of file diff --git a/keyboards/checkerboards/phoenix45_ortho/keymaps/2x3u/config.h b/keyboards/checkerboards/phoenix45_ortho/keymaps/2x3u/config.h new file mode 100644 index 0000000000..b1498826ee --- /dev/null +++ b/keyboards/checkerboards/phoenix45_ortho/keymaps/2x3u/config.h @@ -0,0 +1,19 @@ +/* Copyright 2021 Nathan Spears + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#define TAPPING_TOGGLE 2 diff --git a/keyboards/checkerboards/phoenix45_ortho/keymaps/2x3u/keymap.c b/keyboards/checkerboards/phoenix45_ortho/keymaps/2x3u/keymap.c new file mode 100644 index 0000000000..d72c7fecc1 --- /dev/null +++ b/keyboards/checkerboards/phoenix45_ortho/keymaps/2x3u/keymap.c @@ -0,0 +1,46 @@ +/* Copyright 2021 Nathan Spears + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +// Defines for task manager and such +#define CALTDEL LCTL(LALT(KC_DEL)) +#define TSKMGR LCTL(LSFT(KC_ESC)) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_ortho_2x3u( + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_PGUP, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, + CTL_T(KC_ESC), KC_A, KC_R, KC_S, KC_T, KC_D, KC_PGDN, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_HOME, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, + KC_GRV, KC_LGUI, KC_LALT, TT(1), LT(2, KC_SPC), CALTDEL, KC_RALT, KC_CAPS + ), + + [1] = LAYOUT_ortho_2x3u( + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, _______, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, + KC_SLSH, KC_1, KC_2, KC_3, KC_4, KC_5, _______, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSLS, + _______, _______, _______, _______, _______, _______, _______, _______, KC_PPLS, KC_EQL, _______, _______, _______, + KC_ESC, CALTDEL, TSKMGR, _______, _______, KC_NUBS, KC_GRV, _______ + ), + + [2] = LAYOUT_ortho_2x3u( + _______, _______, _______, KC_UP, _______, _______, _______, _______, KC_UNDS, _______, KC_LBRC, KC_RBRC, _______, + _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, KC_MINS, _______, KC_LCBR, KC_RCBR, _______, + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + RESET, _______, _______, _______, _______, _______, _______, _______ + ) +}; + diff --git a/keyboards/checkerboards/phoenix45_ortho/keymaps/6u/config.h b/keyboards/checkerboards/phoenix45_ortho/keymaps/6u/config.h new file mode 100644 index 0000000000..b1498826ee --- /dev/null +++ b/keyboards/checkerboards/phoenix45_ortho/keymaps/6u/config.h @@ -0,0 +1,19 @@ +/* Copyright 2021 Nathan Spears + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#define TAPPING_TOGGLE 2 diff --git a/keyboards/checkerboards/phoenix45_ortho/keymaps/6u/keymap.c b/keyboards/checkerboards/phoenix45_ortho/keymaps/6u/keymap.c new file mode 100644 index 0000000000..53bc6a3286 --- /dev/null +++ b/keyboards/checkerboards/phoenix45_ortho/keymaps/6u/keymap.c @@ -0,0 +1,46 @@ +/* Copyright 2021 Nathan Spears + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +// Defines for task manager and such +#define CALTDEL LCTL(LALT(KC_DEL)) +#define TSKMGR LCTL(LSFT(KC_ESC)) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_ortho_6u( + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_PGUP, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, + CTL_T(KC_ESC), KC_A, KC_R, KC_S, KC_T, KC_D, KC_PGDN, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, TT(2), KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, + KC_GRV, KC_LGUI, KC_LALT, LT(1, KC_SPC), CALTDEL, KC_RALT, KC_CAPS + ), + + [1] = LAYOUT_ortho_6u( + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, _______, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, + KC_SLSH, KC_1, KC_2, KC_3, KC_4, KC_5, _______, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSLS, + _______, _______, _______, _______, _______, _______, _______, _______, KC_PPLS, KC_EQL, _______, _______, _______, + KC_ESC, CALTDEL, TSKMGR, _______, KC_NUBS, KC_GRV, _______ + ), + + [2] = LAYOUT_ortho_6u( + _______, _______, _______, KC_UP, _______, _______, _______, _______, KC_UNDS, _______, KC_LBRC, KC_RBRC, _______, + _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, KC_MINS, _______, KC_LCBR, KC_RCBR, _______, + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + RESET, _______, _______, _______, _______, _______, _______ + ) +}; + diff --git a/keyboards/checkerboards/phoenix45_ortho/keymaps/default/config.h b/keyboards/checkerboards/phoenix45_ortho/keymaps/default/config.h new file mode 100644 index 0000000000..b1498826ee --- /dev/null +++ b/keyboards/checkerboards/phoenix45_ortho/keymaps/default/config.h @@ -0,0 +1,19 @@ +/* Copyright 2021 Nathan Spears + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#define TAPPING_TOGGLE 2 diff --git a/keyboards/checkerboards/phoenix45_ortho/keymaps/default/keymap.c b/keyboards/checkerboards/phoenix45_ortho/keymaps/default/keymap.c new file mode 100644 index 0000000000..cfe0615dee --- /dev/null +++ b/keyboards/checkerboards/phoenix45_ortho/keymaps/default/keymap.c @@ -0,0 +1,46 @@ +/* Copyright 2021 Nathan Spears + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +// Defines for task manager and such +#define CALTDEL LCTL(LALT(KC_DEL)) +#define TSKMGR LCTL(LSFT(KC_ESC)) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_ortho_2x225u( + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_PGUP, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, + CTL_T(KC_ESC), KC_A, KC_R, KC_S, KC_T, KC_D, KC_PGDN, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_HOME, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, + KC_GRV, KC_LGUI, KC_LALT, TT(1), CALTDEL, LT(2, KC_SPC), CALTDEL, KC_RALT, KC_CAPS + ), + + [1] = LAYOUT_ortho_2x225u( + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, _______, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, + KC_SLSH, KC_1, KC_2, KC_3, KC_4, KC_5, _______, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSLS, + _______, _______, _______, _______, _______, _______, _______, _______, KC_PPLS, KC_EQL, _______, _______, _______, + KC_ESC, CALTDEL, TSKMGR, _______, _______, _______, KC_NUBS, KC_GRV, _______ + ), + + [2] = LAYOUT_ortho_2x225u( + _______, _______, _______, KC_UP, _______, _______, _______, _______, KC_UNDS, _______, KC_LBRC, KC_RBRC, _______, + _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, KC_MINS, _______, KC_LCBR, KC_RCBR, _______, + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + RESET, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; + diff --git a/keyboards/checkerboards/phoenix45_ortho/keymaps/via/config.h b/keyboards/checkerboards/phoenix45_ortho/keymaps/via/config.h new file mode 100644 index 0000000000..b1498826ee --- /dev/null +++ b/keyboards/checkerboards/phoenix45_ortho/keymaps/via/config.h @@ -0,0 +1,19 @@ +/* Copyright 2021 Nathan Spears + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#define TAPPING_TOGGLE 2 diff --git a/keyboards/checkerboards/phoenix45_ortho/keymaps/via/keymap.c b/keyboards/checkerboards/phoenix45_ortho/keymaps/via/keymap.c new file mode 100644 index 0000000000..9bd72c06cf --- /dev/null +++ b/keyboards/checkerboards/phoenix45_ortho/keymaps/via/keymap.c @@ -0,0 +1,52 @@ +/* Copyright 2021 Nathan Spears + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +// Defines for task manager and such +#define CALTDEL LCTL(LALT(KC_DEL)) +#define TSKMGR LCTL(LSFT(KC_ESC)) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_ortho_2x225u( + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_PGUP, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, + CTL_T(KC_ESC), KC_A, KC_R, KC_S, KC_T, KC_D, KC_PGDN, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_HOME, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, + KC_GRV, KC_LGUI, KC_LALT, TT(1), CALTDEL, LT(2, KC_SPC), CALTDEL, KC_RALT, KC_CAPS + ), + + [1] = LAYOUT_ortho_2x225u( + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, _______, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, + KC_SLSH, KC_1, KC_2, KC_3, KC_4, KC_5, _______, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSLS, + _______, _______, _______, _______, _______, _______, _______, _______, KC_PPLS, KC_EQL, _______, _______, _______, + KC_ESC, CALTDEL, TSKMGR, _______, _______, _______, KC_NUBS, KC_GRV, _______ + ), + + [2] = LAYOUT_ortho_2x225u( + _______, _______, _______, KC_UP, _______, _______, _______, _______, KC_UNDS, _______, KC_LBRC, KC_RBRC, _______, + _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, KC_MINS, _______, KC_LCBR, KC_RCBR, _______, + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + RESET, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [3] = LAYOUT_ortho_2x225u( + _______, _______, _______, KC_UP, _______, _______, _______, _______, KC_UNDS, _______, KC_LBRC, KC_RBRC, _______, + _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, KC_MINS, _______, KC_LCBR, KC_RCBR, _______, + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + RESET, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/checkerboards/phoenix45_ortho/keymaps/via/rules.mk b/keyboards/checkerboards/phoenix45_ortho/keymaps/via/rules.mk new file mode 100644 index 0000000000..69de2e4c5a --- /dev/null +++ b/keyboards/checkerboards/phoenix45_ortho/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/checkerboards/phoenix45_ortho/phoenix45_ortho.c b/keyboards/checkerboards/phoenix45_ortho/phoenix45_ortho.c new file mode 100644 index 0000000000..89ce3f5ce9 --- /dev/null +++ b/keyboards/checkerboards/phoenix45_ortho/phoenix45_ortho.c @@ -0,0 +1,29 @@ +/* Copyright 2021 Nathan Spears + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "phoenix45_ortho.h" + +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + if (index == 0) { + if (clockwise) { + tap_code_delay(KC_VOLD, 10); + } else { + tap_code_delay(KC_VOLU, 10); + } + } + return true; +} diff --git a/keyboards/checkerboards/phoenix45_ortho/phoenix45_ortho.h b/keyboards/checkerboards/phoenix45_ortho/phoenix45_ortho.h new file mode 100644 index 0000000000..8abf2875a9 --- /dev/null +++ b/keyboards/checkerboards/phoenix45_ortho/phoenix45_ortho.h @@ -0,0 +1,58 @@ +/* Copyright 2021 Nathan Spears + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +#define XXX KC_NO + + +#define LAYOUT_ortho_2x225u( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, \ + k30, k31, k32, k34, k36, k38, k39, k3B, k3C \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C }, \ + { k30, k31, k32, XXX, k34, XXX, k36, XXX, k38, k39, XXX, k3B, k3C } \ +} + +#define LAYOUT_ortho_2x3u( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, \ + k30, k31, k32, k34, k38, k39, k3B, k3C \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C }, \ + { k30, k31, k32, XXX, k34, XXX, XXX, XXX, k38, k39, XXX, k3B, k3C } \ +} + +#define LAYOUT_ortho_6u( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, kOC, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, \ + k30, k31, k32, k36, k39, k3B, k3C \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, kOC }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k2C }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k3C }, \ + { k30, k31, k32, XXX, XXX, XXX, k36, XXX, XXX, k39, XXX, k3B, k3C } \ +} diff --git a/keyboards/checkerboards/phoenix45_ortho/readme.md b/keyboards/checkerboards/phoenix45_ortho/readme.md new file mode 100644 index 0000000000..46e158c0aa --- /dev/null +++ b/keyboards/checkerboards/phoenix45_ortho/readme.md @@ -0,0 +1,17 @@ +# Phoenix45_Ortho + +![Phoenix45_Ortho](https://i.imgur.com/OvgOhIe.png) + +The Phoenix45_Ortho PCB is an ortholinear alternative to Mechvault's Phoenix45. It should also work in the JD45. + +* Keyboard Maintainer: [Nasp](https://github.com/npspears) +* Hardware Supported: Phoenix45 +* Hardware Availability: https://www.checkerboards.xyz/phoenix45-ortho.html + +Make example for this keyboard (after setting up your build environment): + + make checkerboards/phoenix45_ortho:default + +To put the PCB into bootloader mode, short the two pin holes together that are just beneath diode #23. + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). \ No newline at end of file diff --git a/keyboards/checkerboards/phoenix45_ortho/rules.mk b/keyboards/checkerboards/phoenix45_ortho/rules.mk new file mode 100644 index 0000000000..128b76058d --- /dev/null +++ b/keyboards/checkerboards/phoenix45_ortho/rules.mk @@ -0,0 +1,26 @@ +# MCU name +MCU = atmega32u2 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +UNICODE_ENABLE = yes # Unicode +ENCODER_ENABLE = yes # Encoder enable + +# Disable unsupported hardware +AUDIO_SUPPORTED = no +BACKLIGHT_SUPPORTED = no From b168fb3b2cb47f4546d5177152f6e4ee7e870269 Mon Sep 17 00:00:00 2001 From: Kyrre Havik Date: Wed, 27 Oct 2021 01:41:54 +0200 Subject: [PATCH 345/595] [Keyboard] Add minimon/Index tab 13x6 ortho (#14765) Co-authored-by: Joel Challis Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- keyboards/minimon/index_tab/config.h | 64 +++++++++++++++++++ keyboards/minimon/index_tab/index_tab.c | 14 ++++ keyboards/minimon/index_tab/index_tab.h | 36 +++++++++++ keyboards/minimon/index_tab/info.json | 17 +++++ .../index_tab/keymaps/default/keymap.c | 44 +++++++++++++ .../index_tab/keymaps/default/readme.md | 6 ++ .../minimon/index_tab/keymaps/via/keymap.c | 53 +++++++++++++++ .../minimon/index_tab/keymaps/via/rules.mk | 1 + keyboards/minimon/index_tab/readme.md | 35 ++++++++++ keyboards/minimon/index_tab/rules.mk | 21 ++++++ keyboards/minimon/info.json | 4 ++ keyboards/minimon/readme.md | 9 +++ 12 files changed, 304 insertions(+) create mode 100644 keyboards/minimon/index_tab/config.h create mode 100644 keyboards/minimon/index_tab/index_tab.c create mode 100644 keyboards/minimon/index_tab/index_tab.h create mode 100644 keyboards/minimon/index_tab/info.json create mode 100644 keyboards/minimon/index_tab/keymaps/default/keymap.c create mode 100644 keyboards/minimon/index_tab/keymaps/default/readme.md create mode 100644 keyboards/minimon/index_tab/keymaps/via/keymap.c create mode 100644 keyboards/minimon/index_tab/keymaps/via/rules.mk create mode 100644 keyboards/minimon/index_tab/readme.md create mode 100644 keyboards/minimon/index_tab/rules.mk create mode 100644 keyboards/minimon/info.json create mode 100644 keyboards/minimon/readme.md diff --git a/keyboards/minimon/index_tab/config.h b/keyboards/minimon/index_tab/config.h new file mode 100644 index 0000000000..fc02185545 --- /dev/null +++ b/keyboards/minimon/index_tab/config.h @@ -0,0 +1,64 @@ +/* +Copyright 2020 Kyrre Havik Eriksen + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4B49 +#define PRODUCT_ID 0x1306 +#define DEVICE_VER 0x0001 +#define PRODUCT Index Tab + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 13 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { D3, B7, B3, B2, B1, B0 } +#define MATRIX_COL_PINS { F7, C7, C6, B6, B5, B4, D7, D6, D4, D5, D2, F1, F0 } +#define UNUSED_PINS { F4, F5, F6, D1, D0 } + + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +#define RGB_DI_PIN E6 +#define RGBLED_NUM 10 +#define RGBLIGHT_SLEEP + +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE diff --git a/keyboards/minimon/index_tab/index_tab.c b/keyboards/minimon/index_tab/index_tab.c new file mode 100644 index 0000000000..a0d8377e97 --- /dev/null +++ b/keyboards/minimon/index_tab/index_tab.c @@ -0,0 +1,14 @@ +/* +Copyright 2020 Kyrre Havik Eriksen +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include "index_tab.h" diff --git a/keyboards/minimon/index_tab/index_tab.h b/keyboards/minimon/index_tab/index_tab.h new file mode 100644 index 0000000000..cb9d3c5ae6 --- /dev/null +++ b/keyboards/minimon/index_tab/index_tab.h @@ -0,0 +1,36 @@ +/* Copyright 2020 Kyrre Havik Eriksen + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +#define LAYOUT( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, K0c, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, K1c, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, K2c, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b, K3c, \ + K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4a, K4b, K4c, \ + K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K5a, K5b, K5c \ +) \ + { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, K0c }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, K1c }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, K2c }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b, K3c }, \ + { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4a, K4b, K4c }, \ + { K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K5a, K5b, K5c } \ + } diff --git a/keyboards/minimon/index_tab/info.json b/keyboards/minimon/index_tab/info.json new file mode 100644 index 0000000000..21ff5a3cde --- /dev/null +++ b/keyboards/minimon/index_tab/info.json @@ -0,0 +1,17 @@ +{ + "keyboard_name": "Index Tab", + "maintainer": "kyrremann", + "url": "https://github.com/Kyrremann/index-tab", + "layouts": { + "LAYOUT_all": { + "layout": [ + {"label":"CAPS", "x":0, "y":0}, {"label":"F1", "x":1, "y":0}, {"label":"F2", "x":2, "y":0}, {"label":"F3", "x":3, "y":0}, {"label":"F4", "x":4, "y":0}, {"label":"F5", "x":5, "y":0}, {"label":"F6", "x":6, "y":0}, {"label":"F7", "x":7, "y":0}, {"label":"F8", "x":8, "y":0}, {"label":"F9", "x":9, "y":0}, {"label":"F10", "x":10, "y":0}, {"label":"F11", "x":11, "y":0}, {"label":"F12", "x":12, "y":0}, + {"label":"<", "x":0, "y":1}, {"label":"1", "x":1, "y":1}, {"label":"2", "x":2, "y":1}, {"label":"3", "x":3, "y":1}, {"label":"4", "x":4, "y":1}, {"label":"5", "x":5, "y":1}, {"label":"6", "x":6, "y":1}, {"label":"7", "x":7, "y":1}, {"label":"8", "x":8, "y":1}, {"label":"9", "x":9, "y":1}, {"label":"0", "x":10, "y":1}, {"label":"+", "x":11, "y":1}, {"label":"\u00b4", "x":12, "y":1}, + {"label":"TAB", "x":0, "y":2}, {"label":"q", "x":1, "y":2}, {"label":"w", "x":2, "y":2}, {"label":"e", "x":3, "y":2}, {"label":"r", "x":4, "y":2}, {"label":"t", "x":5, "y":2}, {"label":"y", "x":6, "y":2}, {"label":"u", "x":7, "y":2}, {"label":"i", "x":8, "y":2}, {"label":"o", "x":9, "y":2}, {"label":"p", "x":10, "y":2}, {"label":"\u00e5", "x":11, "y":2}, {"label":"BKSP", "x":12, "y":2}, + {"label":"CTRL", "x":0, "y":3}, {"label":"a", "x":1, "y":3}, {"label":"s", "x":2, "y":3}, {"label":"d", "x":3, "y":3}, {"label":"f", "x":4, "y":3}, {"label":"g", "x":5, "y":3}, {"label":"h", "x":6, "y":3}, {"label":"j", "x":7, "y":3}, {"label":"k", "x":8, "y":3}, {"label":"l", "x":9, "y":3}, {"label":"\u00f8", "x":10, "y":3}, {"label":"\u00e6", "x":11, "y":3}, {"label":"\u00a8", "x":12, "y":3}, + {"label":"SHIFT", "x":0, "y":4}, {"label":"z", "x":1, "y":4}, {"label":"x", "x":2, "y":4}, {"label":"c", "x":3, "y":4}, {"label":"v", "x":4, "y":4}, {"label":"b", "x":5, "y":4}, {"label":"n", "x":6, "y":4}, {"label":"m", "x":7, "y":4}, {"label":",", "x":8, "y":4}, {"label":".", "x":9, "y":4}, {"label":"-", "x":10, "y":4}, {"label":"\u2191", "x":11, "y":4}, {"label":"\u21b2", "x":12, "y":4}, + {"label":"ESC", "x":0, "y":5}, {"label":"\u00a7", "x":1, "y":5}, {"label":"WIN", "x":2, "y":5}, {"label":"LALT", "x":3, "y":5}, {"x":4, "y":5, "w":2}, {"x":6, "y":5, "w":2}, {"label":"FN", "x":8, "y":5}, {"label":"@", "x":9, "y":5}, {"label":"\u2190", "x":10, "y":5}, {"label":"\u2193", "x":11, "y":5}, {"label":"\u2192", "x":12, "y":5} + ] + } + } +} diff --git a/keyboards/minimon/index_tab/keymaps/default/keymap.c b/keyboards/minimon/index_tab/keymaps/default/keymap.c new file mode 100644 index 0000000000..9f2a3d1320 --- /dev/null +++ b/keyboards/minimon/index_tab/keymaps/default/keymap.c @@ -0,0 +1,44 @@ +/* +Copyright 2020 Kyrre Havik Eriksen +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[0] = LAYOUT( + KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + KC_NUBS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_BSPC, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_RBRC, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_UP, KC_ENT, + KC_ESC, KC_GRV, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_SPC, TG(1), KC_BSLS, KC_LEFT, KC_DOWN, KC_RGHT + ), + +[1] = LAYOUT( + KC_TRNS, RGB_TOG, RGB_MOD, RGB_RMOD,RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_SPI, RGB_SPD, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, KC_TRNS, KC_P4, KC_P5, KC_P6, KC_PCMM, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MSTP, KC_VOLD, KC_MUTE, KC_VOLU, KC_MNXT, KC_P1, KC_P2, KC_P3, KC_PEQL, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_MPLY, KC_MPLY, KC_MPLY, KC_TRNS, KC_P0, KC_P0, KC_PDOT, KC_PENT + ), + +[2] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/minimon/index_tab/keymaps/default/readme.md b/keyboards/minimon/index_tab/keymaps/default/readme.md new file mode 100644 index 0000000000..3633ffcd08 --- /dev/null +++ b/keyboards/minimon/index_tab/keymaps/default/readme.md @@ -0,0 +1,6 @@ +Index Tab default keymap +======================== + +![Index Tab layout image](https://i.imgur.com/BSsNGL9.png) + +[Keyboard layout editor](http://www.keyboard-layout-editor.com/##@@_a:7%3B&=CAPS&=F1&=F2&=F3&=F4&=F5&=F6&=F7&=F8&=F9&=F10&=F11&=F12%3B&@=%3C&=1&=2&=3&=4&=5&=6&=7&=8&=9&=0&=+&=%C2%B4%3B&@=TAB&=q&=w&=e&=r&=t&=y&=u&=i&=o&=p&=%C3%A5&=BKSP%3B&@=CTRL&=a&=s&=d&=f&=g&=h&=j&=k&=l&=%C3%B8&=%C3%A6&=%C2%A8%3B&@=SHIFT&=z&=x&=c&=v&=b&=n&=m&=,&=.&=-&=%E2%86%91&=%E2%86%B2%3B&@=ESC&=%C2%A7&=WIN&=LALT&_w:2%3B&=&_w:2%3B&=&=FN&=%2F@&=%E2%86%90&=%E2%86%93&=%E2%86%92) diff --git a/keyboards/minimon/index_tab/keymaps/via/keymap.c b/keyboards/minimon/index_tab/keymaps/via/keymap.c new file mode 100644 index 0000000000..f6f0e0da1e --- /dev/null +++ b/keyboards/minimon/index_tab/keymaps/via/keymap.c @@ -0,0 +1,53 @@ +/* +Copyright 2020 Kyrre Havik Eriksen +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[0] = LAYOUT( + KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + KC_NUBS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_BSPC, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_RBRC, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_NUHS, KC_SFTENT, + KC_ESC, KC_GRV, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_SPC, TG(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT + ), + +[1] = LAYOUT( + KC_TRNS, RGB_TOG, RGB_MOD, RGB_RMOD,RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_SPI, RGB_SPD, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSLS, KC_PAST, KC_PMNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MRWD, KC_TRNS, KC_MSTP, KC_TRNS, KC_MFFD, KC_P4, KC_P5, KC_P6, KC_PCMM, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_VOLD, KC_MUTE, KC_VOLU, KC_MNXT, KC_P1, KC_P2, KC_P3, KC_PENT, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_TRNS, KC_TRNS, KC_MPLY, KC_TRNS, KC_P0, KC_P0, KC_PDOT, KC_PEQL + ), + +[2] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + +[3] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/minimon/index_tab/keymaps/via/rules.mk b/keyboards/minimon/index_tab/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/minimon/index_tab/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/minimon/index_tab/readme.md b/keyboards/minimon/index_tab/readme.md new file mode 100644 index 0000000000..31ad51aa55 --- /dev/null +++ b/keyboards/minimon/index_tab/readme.md @@ -0,0 +1,35 @@ +# Index Tab + +Not just another ortho-keyboard. but one catering to the northern marked with our extra letters. +This is a 13x6 ortho keyboard; giving you enough space for all the numbers, all the F-keys, and our precious extraordinary letters. + +![Picture of the keyboard in the wild](https://raw.githubusercontent.com/Kyrremann/index-tab/master/images/rev5-dsa-vilebloom.JPG) + +Keyboard Maintainer: [Kyrremann](https://github.com/Kyrremann) + +The keyboard files can be found here: https://github.com/Kyrremann/index-tab + + +## Instructions + +To create a hex file for the Index Tab, run: + + make minimon/index_tab:default + +Flash the keyboard with QMK Toolbox or run: + + make minimon/index_tab:default:flash + +How to enter bootloader (DFU): + +Press the reset button on the underside of the board, near the USB port. + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. +Brand new to QMK? Start with the [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + + +## Default layout + +![Index Tab layout image](https://raw.githubusercontent.com/Kyrremann/index-tab/master/images/index-tab.png) + +[Keyboard layout editor](http://www.keyboard-layout-editor.com/#/gists/2577189f7cf19d980fff8177d14dc3ec) diff --git a/keyboards/minimon/index_tab/rules.mk b/keyboards/minimon/index_tab/rules.mk new file mode 100644 index 0000000000..dcc5fd8be8 --- /dev/null +++ b/keyboards/minimon/index_tab/rules.mk @@ -0,0 +1,21 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/minimon/info.json b/keyboards/minimon/info.json new file mode 100644 index 0000000000..6740fa750f --- /dev/null +++ b/keyboards/minimon/info.json @@ -0,0 +1,4 @@ +{ + "maintainer": "Kyrremann", + "manufacturer": "Minimon" +} diff --git a/keyboards/minimon/readme.md b/keyboards/minimon/readme.md new file mode 100644 index 0000000000..cd020a1110 --- /dev/null +++ b/keyboards/minimon/readme.md @@ -0,0 +1,9 @@ +![Minimon logo](https://i.imgur.com/4SWEH5Kh.png) + +Having fun making keyboards for the northern marked, as we need an extra column for our extended alphabets. + +Maintained by [Kyrremann](https://github.com/Kyrremann). + +## Keyboards + +* [Index Tab](index_tab/) - 13x6 ortho keyboard From 312b1b95a88e1b4b6d0642e1f788bcbd3d8d589b Mon Sep 17 00:00:00 2001 From: JayceFayne <13365789+JayceFayne@users.noreply.github.com> Date: Wed, 27 Oct 2021 01:55:04 +0200 Subject: [PATCH 346/595] Document `MAGIC` feature (#14301) --- docs/config_options.md | 2 ++ 1 file changed, 2 insertions(+) diff --git a/docs/config_options.md b/docs/config_options.md index dbf3d3da2e..cfbe39f0d3 100644 --- a/docs/config_options.md +++ b/docs/config_options.md @@ -404,6 +404,8 @@ However, this will automatically disable the legacy TMK Macros and Functions fea Use these to enable or disable building certain features. The more you have enabled the bigger your firmware will be, and you run the risk of building a firmware too large for your MCU. +* `MAGIC_ENABLE` + * MAGIC actions (BOOTMAGIC without the boot) * `BOOTMAGIC_ENABLE` * Virtual DIP switch configuration * `MOUSEKEY_ENABLE` From c0c7c4692b83168cf016b7235133e121b0d1f6f0 Mon Sep 17 00:00:00 2001 From: Albert Y <76888457+filterpaper@users.noreply.github.com> Date: Wed, 27 Oct 2021 08:09:12 +0800 Subject: [PATCH 347/595] Add MAGIC_TOGGLE_GUI line to main keycode documentation (#14959) Co-authored-by: filterpaper --- docs/keycodes.md | 1 + 1 file changed, 1 insertion(+) diff --git a/docs/keycodes.md b/docs/keycodes.md index a134c5a1b2..9f61447dc5 100644 --- a/docs/keycodes.md +++ b/docs/keycodes.md @@ -344,6 +344,7 @@ See also: [Magic Keycodes](keycodes_magic.md) |`MAGIC_TOGGLE_ALT_GUI` |`AG_TOGG`|Toggle Alt and GUI swap on both sides | |`MAGIC_NO_GUI` |`GUI_OFF`|Disable the GUI keys | |`MAGIC_UNNO_GUI` |`GUI_ON` |Enable the GUI keys | +|`MAGIC_TOGGLE_GUI` |`GUI_TOG`|Toggles the status of the GUI keys | |`MAGIC_SWAP_GRAVE_ESC` |`GE_SWAP`|Swap ` and Escape | |`MAGIC_UNSWAP_GRAVE_ESC` |`GE_NORM`|Unswap ` and Escape | |`MAGIC_SWAP_BACKSLASH_BACKSPACE` |`BS_SWAP`|Swap `\` and Backspace | From e5a729ccabf4c261a697dae22c5315fb1ae9990b Mon Sep 17 00:00:00 2001 From: projectcain <71684775+projectcain@users.noreply.github.com> Date: Tue, 26 Oct 2021 19:54:17 -0500 Subject: [PATCH 348/595] [Keyboard] add ProjectCain Vault35; update Vault45 (#13652) Co-authored-by: Drashna Jaelre Co-authored-by: ridingqwerty Co-authored-by: Ryan Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> --- keyboards/projectcain/vault35/config.h | 149 ++++++++++++++++++ keyboards/projectcain/vault35/info.json | 22 +++ .../vault35/keymaps/default/config.h | 24 +++ .../vault35/keymaps/default/keymap.c | 66 ++++++++ .../vault35/keymaps/default/readme.md | 1 + .../vault35/keymaps/default/rules.mk | 2 + keyboards/projectcain/vault35/readme.md | 21 +++ keyboards/projectcain/vault35/rules.mk | 21 +++ keyboards/projectcain/vault35/vault35.c | 29 ++++ keyboards/projectcain/vault35/vault35.h | 80 ++++++++++ keyboards/projectcain/vault45/info.json | 79 +++------- .../vault45/keymaps/default/keymap.c | 12 +- keyboards/projectcain/vault45/vault45.h | 54 ++++++- 13 files changed, 498 insertions(+), 62 deletions(-) create mode 100644 keyboards/projectcain/vault35/config.h create mode 100644 keyboards/projectcain/vault35/info.json create mode 100644 keyboards/projectcain/vault35/keymaps/default/config.h create mode 100644 keyboards/projectcain/vault35/keymaps/default/keymap.c create mode 100644 keyboards/projectcain/vault35/keymaps/default/readme.md create mode 100644 keyboards/projectcain/vault35/keymaps/default/rules.mk create mode 100644 keyboards/projectcain/vault35/readme.md create mode 100644 keyboards/projectcain/vault35/rules.mk create mode 100644 keyboards/projectcain/vault35/vault35.c create mode 100644 keyboards/projectcain/vault35/vault35.h diff --git a/keyboards/projectcain/vault35/config.h b/keyboards/projectcain/vault35/config.h new file mode 100644 index 0000000000..5eccd57172 --- /dev/null +++ b/keyboards/projectcain/vault35/config.h @@ -0,0 +1,149 @@ +/* +Copyright 2021 projectcain +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6060 +#define DEVICE_VER 0x0001 +#define MANUFACTURER projectcain +#define PRODUCT vault35 + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 11 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { B4, D4, B0, C7 } +#define MATRIX_COL_PINS { B1, D3, F0, F1, F4, F5, F6, F7, C6, B6, B5 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +//#define LED_NUM_LOCK_PIN B0 +//#define LED_CAPS_LOCK_PIN B1 +//#define LED_SCROLL_LOCK_PIN B2 +//#define LED_COMPOSE_PIN B3 +//#define LED_KANA_PIN B4 + +//#define BACKLIGHT_PIN B7 +//#define BACKLIGHT_LEVELS 3 +//#define BACKLIGHT_BREATHING + +//#define RGB_DI_PIN E2 +//#ifdef RGB_DI_PIN +//# define RGBLED_NUM 16 +//# define RGBLIGHT_HUE_STEP 8 +//# define RGBLIGHT_SAT_STEP 8 +//# define RGBLIGHT_VAL_STEP 8 +//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ +//# define RGBLIGHT_ANIMATIONS +/*== or choose animations ==*/ +//# define RGBLIGHT_EFFECT_BREATHING +//# define RGBLIGHT_EFFECT_RAINBOW_MOOD +//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL +//# define RGBLIGHT_EFFECT_SNAKE +//# define RGBLIGHT_EFFECT_KNIGHT +//# define RGBLIGHT_EFFECT_CHRISTMAS +//# define RGBLIGHT_EFFECT_STATIC_GRADIENT +//# define RGBLIGHT_EFFECT_RGB_TEST +//# define RGBLIGHT_EFFECT_ALTERNATING +/*== customize breathing effect ==*/ +/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +/*==== use exp() and sin() ====*/ +//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +//#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 \ No newline at end of file diff --git a/keyboards/projectcain/vault35/info.json b/keyboards/projectcain/vault35/info.json new file mode 100644 index 0000000000..e842e35e41 --- /dev/null +++ b/keyboards/projectcain/vault35/info.json @@ -0,0 +1,22 @@ +{ + "keyboard_name": "Vault 35", + "url": "", + "maintainer": "projectcain", + "layouts": { + "LAYOUT_split_4space": { + "layout": [{"label":"Q", "x":0, "y":0}, {"label":"W", "x":1, "y":0}, {"label":"E", "x":2, "y":0}, {"label":"R", "x":3, "y":0}, {"label":"T", "x":4, "y":0}, {"label":"Y", "x":5, "y":0}, {"label":"U", "x":6, "y":0}, {"label":"I", "x":7, "y":0}, {"label":"O", "x":8, "y":0}, {"label":"P", "x":9, "y":0}, {"label":"BACK
SPACE", "x":10, "y":0}, {"label":"TAB", "x":0, "y":1, "w":1.25}, {"label":"S", "x":1.25, "y":1}, {"label":"D", "x":2.25, "y":1}, {"label":"F", "x":3.25, "y":1}, {"label":"G", "x":4.25, "y":1}, {"label":"H", "x":5.25, "y":1}, {"label":"J", "x":6.25, "y":1}, {"label":"K", "x":7.25, "y":1}, {"label":"L", "x":8.25, "y":1}, {"label":"ENTER", "x":9.25, "y":1, "w":1.75}, {"label":"SHIFT", "x":0, "y":2, "w":1.75}, {"label":"X", "x":1.75, "y":2}, {"label":"C", "x":2.75, "y":2}, {"label":"V", "x":3.75, "y":2}, {"label":"B", "x":4.75, "y":2}, {"label":"N", "x":5.75, "y":2}, {"label":"M", "x":6.75, "y":2}, {"label":"<", "x":7.75, "y":2}, {"label":">", "x":8.75, "y":2}, {"label":"SHIFT", "x":9.75, "y":2, "w":1.25}, {"label":"CTRL", "x":1.5, "y":3}, {"label":"LOWER", "x":2.5, "y":3, "w":1.25}, {"x":3.75, "y":3, "w":1.75}, {"x":5.5, "y":3, "w":1.75}, {"label":"RAISE", "x":7.25, "y":3, "w":1.25}, {"label":"ALT", "x":8.5, "y":3}] + }, + + "LAYOUT_split_3space": { + "layout": [{"label":"Q", "x":0, "y":0}, {"label":"W", "x":1, "y":0}, {"label":"E", "x":2, "y":0}, {"label":"R", "x":3, "y":0}, {"label":"T", "x":4, "y":0}, {"label":"Y", "x":5, "y":0}, {"label":"U", "x":6, "y":0}, {"label":"I", "x":7, "y":0}, {"label":"O", "x":8, "y":0}, {"label":"P", "x":9, "y":0}, {"label":"BACK
SPACE", "x":10, "y":0}, {"label":"TAB", "x":0, "y":1, "w":1.25}, {"label":"S", "x":1.25, "y":1}, {"label":"D", "x":2.25, "y":1}, {"label":"F", "x":3.25, "y":1}, {"label":"G", "x":4.25, "y":1}, {"label":"H", "x":5.25, "y":1}, {"label":"J", "x":6.25, "y":1}, {"label":"K", "x":7.25, "y":1}, {"label":"L", "x":8.25, "y":1}, {"label":"ENTER", "x":9.25, "y":1, "w":1.75}, {"label":"SHIFT", "x":0, "y":2, "w":1.75}, {"label":"X", "x":1.75, "y":2}, {"label":"C", "x":2.75, "y":2}, {"label":"V", "x":3.75, "y":2}, {"label":"B", "x":4.75, "y":2}, {"label":"N", "x":5.75, "y":2}, {"label":"M", "x":6.75, "y":2}, {"label":"<", "x":7.75, "y":2}, {"label":">", "x":8.75, "y":2}, {"label":"SHIFT", "x":9.75, "y":2, "w":1.25}, {"label":"CTRL", "x":1.5, "y":3}, {"x":2.5, "y":3, "w":2.25}, {"label":"FN", "x":4.75, "y":3}, {"x":5.75, "y":3, "w":2.75}, {"label":"ALT", "x":8.5, "y":3}] + }, + + "LAYOUT_split_2space": { + "layout": [{"label":"Q", "x":0, "y":0}, {"label":"W", "x":1, "y":0}, {"label":"E", "x":2, "y":0}, {"label":"R", "x":3, "y":0}, {"label":"T", "x":4, "y":0}, {"label":"Y", "x":5, "y":0}, {"label":"U", "x":6, "y":0}, {"label":"I", "x":7, "y":0}, {"label":"O", "x":8, "y":0}, {"label":"P", "x":9, "y":0}, {"label":"BACK
SPACE", "x":10, "y":0}, {"label":"TAB", "x":0, "y":1, "w":1.25}, {"label":"S", "x":1.25, "y":1}, {"label":"D", "x":2.25, "y":1}, {"label":"F", "x":3.25, "y":1}, {"label":"G", "x":4.25, "y":1}, {"label":"H", "x":5.25, "y":1}, {"label":"J", "x":6.25, "y":1}, {"label":"K", "x":7.25, "y":1}, {"label":"L", "x":8.25, "y":1}, {"label":"ENTER", "x":9.25, "y":1, "w":1.75}, {"label":"SHIFT", "x":0, "y":2, "w":1.75}, {"label":"X", "x":1.75, "y":2}, {"label":"C", "x":2.75, "y":2}, {"label":"V", "x":3.75, "y":2}, {"label":"B", "x":4.75, "y":2}, {"label":"N", "x":5.75, "y":2}, {"label":"M", "x":6.75, "y":2}, {"label":"<", "x":7.75, "y":2}, {"label":">", "x":8.75, "y":2}, {"label":"SHIFT", "x":9.75, "y":2, "w":1.25}, {"label":"CTRL", "x":1.5, "y":3}, {"x":2.5, "y":3, "w":3}, {"x":5.5, "y":3, "w":3}, {"label":"ALT", "x":8.5, "y":3}] + }, + + "LAYOUT_full_space": { + "layout": [{"label":"Q", "x":0, "y":0}, {"label":"W", "x":1, "y":0}, {"label":"E", "x":2, "y":0}, {"label":"R", "x":3, "y":0}, {"label":"T", "x":4, "y":0}, {"label":"Y", "x":5, "y":0}, {"label":"U", "x":6, "y":0}, {"label":"I", "x":7, "y":0}, {"label":"O", "x":8, "y":0}, {"label":"P", "x":9, "y":0}, {"label":"BACK
SPACE", "x":10, "y":0}, {"label":"TAB", "x":0, "y":1, "w":1.25}, {"label":"S", "x":1.25, "y":1}, {"label":"D", "x":2.25, "y":1}, {"label":"F", "x":3.25, "y":1}, {"label":"G", "x":4.25, "y":1}, {"label":"H", "x":5.25, "y":1}, {"label":"J", "x":6.25, "y":1}, {"label":"K", "x":7.25, "y":1}, {"label":"L", "x":8.25, "y":1}, {"label":"ENTER", "x":9.25, "y":1, "w":1.75}, {"label":"SHIFT", "x":0, "y":2, "w":1.75}, {"label":"X", "x":1.75, "y":2}, {"label":"C", "x":2.75, "y":2}, {"label":"V", "x":3.75, "y":2}, {"label":"B", "x":4.75, "y":2}, {"label":"N", "x":5.75, "y":2}, {"label":"M", "x":6.75, "y":2}, {"label":"<", "x":7.75, "y":2}, {"label":">", "x":8.75, "y":2}, {"label":"SHIFT", "x":9.75, "y":2, "w":1.25}, {"label":"CTRL", "x":1.5, "y":3}, {"x":2.5, "y":3, "w":6}, {"label":"ALT", "x":8.5, "y":3}] + } + } +} diff --git a/keyboards/projectcain/vault35/keymaps/default/config.h b/keyboards/projectcain/vault35/keymaps/default/config.h new file mode 100644 index 0000000000..6d8aa3d81a --- /dev/null +++ b/keyboards/projectcain/vault35/keymaps/default/config.h @@ -0,0 +1,24 @@ +/* Copyright 2021 projectcain + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#define ENCODERS_PAD_A { D6 } +#define ENCODERS_PAD_B { D7 } +#define ENCODER_RESOLUTION 2 +#define COMBO_COUNT 2 +#define COMBO_TERM 50 +#define TAPPING_FORCE_HOLD diff --git a/keyboards/projectcain/vault35/keymaps/default/keymap.c b/keyboards/projectcain/vault35/keymaps/default/keymap.c new file mode 100644 index 0000000000..454e2a07ed --- /dev/null +++ b/keyboards/projectcain/vault35/keymaps/default/keymap.c @@ -0,0 +1,66 @@ + + /* Copyright 2021 projectcain + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H +enum layers{ + BASE, + NUM, + SYM, + META +}; + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [BASE] = LAYOUT_split_4space( + + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOTE, + KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, + LALT(KC_TAB), MO(1), SFT_T(KC_BSPC), KC_SPACE, MO(2), RESET + ), + + [NUM] = LAYOUT_split_4space( + + KC_PGUP, KC_HOME, KC_UP, KC_END, KC_WBAK, KC_PSLS, KC_7, KC_8, KC_9, KC_PMNS, KC_DEL, + KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, KC_WFWD, KC_PAST, KC_4, KC_5, KC_6, KC_PPLS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_0, KC_1, KC_2, KC_3, KC_PDOT, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RALT(KC_F4), RALT(KC_F4) + ), + + [SYM] = LAYOUT_split_4space( + + S(KC_GRV), KC_GRV, KC_BSLS, S(KC_BSLS), KC_TRNS, KC_TRNS, S(KC_MINS), KC_EQL, KC_TRNS, C(KC_W), C(KC_T), + S(KC_1), S(KC_2), S(KC_3), S(KC_4), S(KC_5), S(KC_6), S(KC_7), S(KC_8), KC_SCLN, S(KC_SCLN), + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NUMLOCK, KC_TRNS + ), + +}; + + +enum combos { + KL_SLSH, + JK_MINUS +}; + +const uint16_t PROGMEM kl_combo[] = {KC_K, KC_L, COMBO_END}; +const uint16_t PROGMEM jk_combo[] = {KC_J, KC_K, COMBO_END}; + +combo_t key_combos[COMBO_COUNT] = { + [KL_SLSH] = COMBO(kl_combo, S(KC_SLSH)), + [JK_MINUS] = COMBO(jk_combo, KC_MINUS) +}; diff --git a/keyboards/projectcain/vault35/keymaps/default/readme.md b/keyboards/projectcain/vault35/keymaps/default/readme.md new file mode 100644 index 0000000000..6080722767 --- /dev/null +++ b/keyboards/projectcain/vault35/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for vault35 diff --git a/keyboards/projectcain/vault35/keymaps/default/rules.mk b/keyboards/projectcain/vault35/keymaps/default/rules.mk new file mode 100644 index 0000000000..dca6713d4f --- /dev/null +++ b/keyboards/projectcain/vault35/keymaps/default/rules.mk @@ -0,0 +1,2 @@ +ENCODER_ENABLE = yes +COMBO_ENABLE = yes \ No newline at end of file diff --git a/keyboards/projectcain/vault35/readme.md b/keyboards/projectcain/vault35/readme.md new file mode 100644 index 0000000000..88d3ebc73e --- /dev/null +++ b/keyboards/projectcain/vault35/readme.md @@ -0,0 +1,21 @@ +# vault35 + +![vault35](https://i.imgur.com/yw3Fvjxh.jpg) + +This is a 30% HHKB-style variant of the vault45 with several bottom row options and rotary encoder support. + +* Keyboard Maintainer: [projectcain](https://github.com/projectcain) +* Hardware Supported: Vault 35 PCB +* Hardware Availability: mechvault.net + +To reset the keyboard into bootloader mode, short the two pads labeled "Reset" on the left side of the pcb + +Make example for this keyboard (after setting up your build environment): + + make projectcain/vault35:default + +Flashing example for this keyboard: + + make projectcain/vault35:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/projectcain/vault35/rules.mk b/keyboards/projectcain/vault35/rules.mk new file mode 100644 index 0000000000..9906266f48 --- /dev/null +++ b/keyboards/projectcain/vault35/rules.mk @@ -0,0 +1,21 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/projectcain/vault35/vault35.c b/keyboards/projectcain/vault35/vault35.c new file mode 100644 index 0000000000..9a83d47ad1 --- /dev/null +++ b/keyboards/projectcain/vault35/vault35.c @@ -0,0 +1,29 @@ +/* Copyright 2021 projectcain + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "vault35.h" + +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + if (index == 0) { /* First encoder */ + if (clockwise) { + tap_code(KC_PGDN); + } else { + tap_code(KC_PGUP); + } + } + return true; +} \ No newline at end of file diff --git a/keyboards/projectcain/vault35/vault35.h b/keyboards/projectcain/vault35/vault35.h new file mode 100644 index 0000000000..af5577f314 --- /dev/null +++ b/keyboards/projectcain/vault35/vault35.h @@ -0,0 +1,80 @@ +/* Copyright 2021 projectcain + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ + +#define LAYOUT_split_4space( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, \ + K301, K302, K303, K305, K306, K307 \ +) \ +{ \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, KC_NO }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, KC_NO }, \ + { KC_NO, K301, K302, K303, KC_NO, K305, K306, K307, KC_NO, KC_NO, KC_NO } \ +} + +#define LAYOUT_split_3space( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, \ + K301, K303, K304, K305, K307 \ +) \ +{ \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, KC_NO }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, KC_NO }, \ + { KC_NO, K301, KC_NO, K303, K304, K305, KC_NO, K307, KC_NO, KC_NO, KC_NO } \ +} + +#define LAYOUT_split_2space( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, \ + K301, K303, K305, K307 \ +) \ +{ \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, KC_NO }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, KC_NO }, \ + { KC_NO, K301, KC_NO, K303, KC_NO, K305, KC_NO, K307, KC_NO, KC_NO, KC_NO } \ +} + +#define LAYOUT_full_space( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, \ + K301, K304, K307 \ +) \ +{ \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, KC_NO }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, KC_NO }, \ + { KC_NO, K301, KC_NO, KC_NO, K304, KC_NO, KC_NO, K307, KC_NO, KC_NO, KC_NO } \ +} diff --git a/keyboards/projectcain/vault45/info.json b/keyboards/projectcain/vault45/info.json index c706000192..de2f299b64 100644 --- a/keyboards/projectcain/vault45/info.json +++ b/keyboards/projectcain/vault45/info.json @@ -1,58 +1,29 @@ { - "keyboard_name": "vault 45", - "url": "", - "maintainer": "projectcain", - "layouts": { - "LAYOUT": { - "layout": [ - { "label": "Tab", "x": 0, "y": 0 }, - { "label": "Q", "x": 1, "y": 0 }, - { "label": "W", "x": 2, "y": 0 }, - { "label": "E", "x": 3, "y": 0 }, - { "label": "R", "x": 4, "y": 0 }, - { "label": "T", "x": 5, "y": 0 }, - { "label": "Y", "x": 6, "y": 0 }, - { "label": "U", "x": 7, "y": 0 }, - { "label": "I", "x": 8, "y": 0 }, - { "label": "O", "x": 9, "y": 0 }, - { "label": "P", "x": 10, "y": 0 }, - { "label": "Back
Space", "x": 11, "y": 0 }, - { "x": 12, "y": 0 }, - { "label": "Caps", "x": 0, "y": 1, "w": 1.25 }, - { "label": "A", "x": 1.25, "y": 1 }, - { "label": "S", "x": 2.25, "y": 1 }, - { "label": "D", "x": 3.25, "y": 1 }, - { "label": "F", "x": 4.25, "y": 1 }, - { "label": "G", "x": 5.25, "y": 1 }, - { "label": "H", "x": 6.25, "y": 1 }, - { "label": "J", "x": 7.25, "y": 1 }, - { "label": "K", "x": 8.25, "y": 1 }, - { "label": "L", "x": 9.25, "y": 1 }, - { "label": ":", "x": 10.25, "y": 1 }, - { "label": "Enter", "x": 11.25, "y": 1, "w": 1.75 }, - { "label": "Shift", "x": 0, "y": 2, "w": 1.75 }, - { "label": "Z", "x": 1.75, "y": 2 }, - { "label": "X", "x": 2.75, "y": 2 }, - { "label": "C", "x": 3.75, "y": 2 }, - { "label": "V", "x": 4.75, "y": 2 }, - { "label": "B", "x": 5.75, "y": 2 }, - { "label": "N", "x": 6.75, "y": 2 }, - { "label": "M", "x": 7.75, "y": 2 }, - { "label": "<", "x": 8.75, "y": 2 }, - { "label": ">", "x": 9.75, "y": 2 }, - { "label": "?", "x": 10.75, "y": 2 }, - { "label": "Shift", "x": 11.75, "y": 2, "w": 1.25 }, - { "label": "Hyper", "x": 0, "y": 3, "w": 1.25 }, - { "label": "Super", "x": 1.25, "y": 3 }, - { "label": "Meta", "x": 2.25, "y": 3, "w": 1.25 }, - { "label": "Alt", "x": 3.5, "y": 3, "w": 1.25 }, - { "x": 4.75, "y": 3, "w": 1.75 }, - { "x": 6.5, "y": 3, "w": 1.75 }, - { "label": "Meta", "x": 8.25, "y": 3, "w": 1.25 }, - { "label": "Super", "x": 9.5, "y": 3, "w": 1.25 }, - { "label": "Fn2", "x": 10.75, "y": 3 }, - { "label": "Ctrl", "x": 11.75, "y": 3, "w": 1.25 } - ] + "keyboard_name": "Vault 45", + "url": "", + "maintainer": "projectcain", + "layout_aliases": { + "LAYOUT": "LAYOUT_all" + }, + "layouts": { + "LAYOUT_all": { + "layout": [{"label":"ESC", "x":0, "y":0}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"label":"DEL", "x":11, "y":0}, {"label":"BACK
SPACE", "x":12, "y":0}, {"label":"TAB", "x":0, "y":1, "w":1.25}, {"label":"A", "x":1.25, "y":1}, {"label":"S", "x":2.25, "y":1}, {"label":"D", "x":3.25, "y":1}, {"label":"F", "x":4.25, "y":1}, {"label":"G", "x":5.25, "y":1}, {"label":"H", "x":6.25, "y":1}, {"label":"J", "x":7.25, "y":1}, {"label":"K", "x":8.25, "y":1}, {"label":"L", "x":9.25, "y":1}, {"label":":", "x":10.25, "y":1}, {"label":"ENTER", "x":11.25, "y":1, "w":1.75}, {"label":"SHIFT", "x":0, "y":2, "w":1.75}, {"label":"Z", "x":1.75, "y":2}, {"label":"X", "x":2.75, "y":2}, {"label":"C", "x":3.75, "y":2}, {"label":"V", "x":4.75, "y":2}, {"label":"B", "x":5.75, "y":2}, {"label":"N", "x":6.75, "y":2}, {"label":"M", "x":7.75, "y":2}, {"label":"<", "x":8.75, "y":2}, {"label":">", "x":9.75, "y":2}, {"label":"?", "x":10.75, "y":2}, {"label":"SHIFT", "x":11.75, "y":2, "w":1.25}, {"label":"CTRL", "x":1.25, "y":3}, {"label":"ALT", "x":2.25, "y":3, "w":1.25}, {"label":"SYS", "x":3.5, "y":3, "w":1.25}, {"x":4.75, "y":3, "w":1.25}, {"x":6, "y":3}, {"x":7, "y":3, "w":1.25}, {"label":"FN", "x":8.25, "y":3, "w":1.25}, {"label":"ALT", "x":9.5, "y":3, "w":1.25}, {"label":"CTRL", "x":10.75, "y":3}] + }, + + "LAYOUT_split_4space": { + "layout": [{"label":"ESC", "x":0, "y":0}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"label":"DEL", "x":11, "y":0}, {"label":"BACK
SPACE", "x":12, "y":0}, {"label":"TAB", "x":0, "y":1, "w":1.25}, {"label":"A", "x":1.25, "y":1}, {"label":"S", "x":2.25, "y":1}, {"label":"D", "x":3.25, "y":1}, {"label":"F", "x":4.25, "y":1}, {"label":"G", "x":5.25, "y":1}, {"label":"H", "x":6.25, "y":1}, {"label":"J", "x":7.25, "y":1}, {"label":"K", "x":8.25, "y":1}, {"label":"L", "x":9.25, "y":1}, {"label":":", "x":10.25, "y":1}, {"label":"ENTER", "x":11.25, "y":1, "w":1.75}, {"label":"SHIFT", "x":0, "y":2, "w":1.75}, {"label":"Z", "x":1.75, "y":2}, {"label":"X", "x":2.75, "y":2}, {"label":"C", "x":3.75, "y":2}, {"label":"V", "x":4.75, "y":2}, {"label":"B", "x":5.75, "y":2}, {"label":"N", "x":6.75, "y":2}, {"label":"M", "x":7.75, "y":2}, {"label":"<", "x":8.75, "y":2}, {"label":">", "x":9.75, "y":2}, {"label":"?", "x":10.75, "y":2}, {"label":"SHIFT", "x":11.75, "y":2, "w":1.25}, {"label":"CTRL", "x":1.25, "y":3}, {"label":"ALT", "x":2.25, "y":3, "w":1.25}, {"label":"SYS", "x":3.5, "y":3, "w":1.25}, {"x":4.75, "y":3, "w":1.75}, {"x":6.5, "y":3, "w":1.75}, {"label":"FN", "x":8.25, "y":3, "w":1.25}, {"label":"ALT", "x":9.5, "y":3, "w":1.25}, {"label":"CTRL", "x":10.75, "y":3}] + }, + + "LAYOUT_split_3space": { + "layout": [{"label":"ESC", "x":0, "y":0}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"label":"DEL", "x":11, "y":0}, {"label":"BACK
SPACE", "x":12, "y":0}, {"label":"TAB", "x":0, "y":1, "w":1.25}, {"label":"A", "x":1.25, "y":1}, {"label":"S", "x":2.25, "y":1}, {"label":"D", "x":3.25, "y":1}, {"label":"F", "x":4.25, "y":1}, {"label":"G", "x":5.25, "y":1}, {"label":"H", "x":6.25, "y":1}, {"label":"J", "x":7.25, "y":1}, {"label":"K", "x":8.25, "y":1}, {"label":"L", "x":9.25, "y":1}, {"label":":", "x":10.25, "y":1}, {"label":"ENTER", "x":11.25, "y":1, "w":1.75}, {"label":"SHIFT", "x":0, "y":2, "w":1.75}, {"label":"Z", "x":1.75, "y":2}, {"label":"X", "x":2.75, "y":2}, {"label":"C", "x":3.75, "y":2}, {"label":"V", "x":4.75, "y":2}, {"label":"B", "x":5.75, "y":2}, {"label":"N", "x":6.75, "y":2}, {"label":"M", "x":7.75, "y":2}, {"label":"<", "x":8.75, "y":2}, {"label":">", "x":9.75, "y":2}, {"label":"?", "x":10.75, "y":2}, {"label":"SHIFT", "x":11.75, "y":2, "w":1.25}, {"label":"CTRL", "x":1.25, "y":3}, {"label":"ALT", "x":2.25, "y":3, "w":1.25}, {"x":3.5, "y":3, "w":2.25}, {"x":5.75, "y":3}, {"x":6.75, "y":3, "w":2.75}, {"label":"ALT", "x":9.5, "y":3, "w":1.25}, {"label":"CTRL", "x":10.75, "y":3}] + }, + + "LAYOUT_split_2space": { + "layout": [{"label":"ESC", "x":0, "y":0}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"label":"DEL", "x":11, "y":0}, {"label":"BACK
SPACE", "x":12, "y":0}, {"label":"TAB", "x":0, "y":1, "w":1.25}, {"label":"A", "x":1.25, "y":1}, {"label":"S", "x":2.25, "y":1}, {"label":"D", "x":3.25, "y":1}, {"label":"F", "x":4.25, "y":1}, {"label":"G", "x":5.25, "y":1}, {"label":"H", "x":6.25, "y":1}, {"label":"J", "x":7.25, "y":1}, {"label":"K", "x":8.25, "y":1}, {"label":"L", "x":9.25, "y":1}, {"label":":", "x":10.25, "y":1}, {"label":"ENTER", "x":11.25, "y":1, "w":1.75}, {"label":"SHIFT", "x":0, "y":2, "w":1.75}, {"label":"Z", "x":1.75, "y":2}, {"label":"X", "x":2.75, "y":2}, {"label":"C", "x":3.75, "y":2}, {"label":"V", "x":4.75, "y":2}, {"label":"B", "x":5.75, "y":2}, {"label":"N", "x":6.75, "y":2}, {"label":"M", "x":7.75, "y":2}, {"label":"<", "x":8.75, "y":2}, {"label":">", "x":9.75, "y":2}, {"label":"?", "x":10.75, "y":2}, {"label":"SHIFT", "x":11.75, "y":2, "w":1.25}, {"label":"CTRL", "x":1.25, "y":3}, {"label":"ALT", "x":2.25, "y":3, "w":1.25}, {"x":3.5, "y":3, "w":3}, {"x":6.5, "y":3, "w":3}, {"label":"ALT", "x":9.5, "y":3, "w":1.25}, {"label":"CTRL", "x":10.75, "y":3}] + }, + + "LAYOUT_full_space": { + "layout": [{"label":"ESC", "x":0, "y":0}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"label":"DEL", "x":11, "y":0}, {"label":"BACK
SPACE", "x":12, "y":0}, {"label":"TAB", "x":0, "y":1, "w":1.25}, {"label":"A", "x":1.25, "y":1}, {"label":"S", "x":2.25, "y":1}, {"label":"D", "x":3.25, "y":1}, {"label":"F", "x":4.25, "y":1}, {"label":"G", "x":5.25, "y":1}, {"label":"H", "x":6.25, "y":1}, {"label":"J", "x":7.25, "y":1}, {"label":"K", "x":8.25, "y":1}, {"label":"L", "x":9.25, "y":1}, {"label":":", "x":10.25, "y":1}, {"label":"ENTER", "x":11.25, "y":1, "w":1.75}, {"label":"SHIFT", "x":0, "y":2, "w":1.75}, {"label":"Z", "x":1.75, "y":2}, {"label":"X", "x":2.75, "y":2}, {"label":"C", "x":3.75, "y":2}, {"label":"V", "x":4.75, "y":2}, {"label":"B", "x":5.75, "y":2}, {"label":"N", "x":6.75, "y":2}, {"label":"M", "x":7.75, "y":2}, {"label":"<", "x":8.75, "y":2}, {"label":">", "x":9.75, "y":2}, {"label":"?", "x":10.75, "y":2}, {"label":"SHIFT", "x":11.75, "y":2, "w":1.25}, {"label":"CTRL", "x":1.25, "y":3}, {"label":"ALT", "x":2.25, "y":3, "w":1.25}, {"x":3.5, "y":3, "w":6}, {"label":"ALT", "x":9.5, "y":3, "w":1.25}, {"label":"CTRL", "x":10.75, "y":3}] } } } diff --git a/keyboards/projectcain/vault45/keymaps/default/keymap.c b/keyboards/projectcain/vault45/keymaps/default/keymap.c index 9307370200..6955320e77 100644 --- a/keyboards/projectcain/vault45/keymaps/default/keymap.c +++ b/keyboards/projectcain/vault45/keymaps/default/keymap.c @@ -21,25 +21,25 @@ enum layers{ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [BASE] = LAYOUT( + [BASE] = LAYOUT_split_4space( KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, KC_F5, KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOTE, LT(SYM, KC_ENT), RCTL_T(S(KC_9)), KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, S(KC_0), - LALT(KC_TAB), LALT(KC_TAB), MO(1), SFT_T(KC_BSPC), KC_SPACE, KC_SPACE, MO(2), KC_LGUI, G(KC_TAB) + LALT(KC_TAB), LALT(KC_TAB), MO(1), SFT_T(KC_BSPC), KC_SPACE, MO(2), KC_LGUI, G(KC_TAB) ), - [NUM] = LAYOUT( + [NUM] = LAYOUT_split_4space( KC_TRNS, KC_PGUP, KC_HOME, KC_UP, KC_END, KC_WBAK, KC_PSLS, KC_7, KC_8, KC_9, KC_PMNS, KC_DEL, RESET, KC_TRNS, KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, KC_WFWD, KC_PAST, KC_4, KC_5, KC_6, KC_PPLS, KC_TRNS, KC_LBRC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_0, KC_1, KC_2, KC_3, KC_PDOT, KC_RBRC, - KC_PSCR, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, S(KC_RCTRL), RALT(KC_F4), RALT(KC_F4) + KC_PSCR, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, S(KC_RCTRL), RALT(KC_F4), RALT(KC_F4) ), - [SYM] = LAYOUT( + [SYM] = LAYOUT_split_4space( RGB_TOG, S(KC_GRV), KC_GRV, KC_BSLS, S(KC_BSLS), KC_TRNS, KC_TRNS, S(KC_MINS), KC_EQL, KC_TRNS, C(KC_W), C(KC_T), KC_TRNS, KC_TRNS, S(KC_1), S(KC_2), S(KC_3), S(KC_4), S(KC_5), S(KC_6), S(KC_7), S(KC_8), KC_SCLN, S(KC_SCLN), KC_TRNS, S(KC_LBRC), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, S(KC_RBRC), - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_CAPSLOCK, KC_NUMLOCK, KC_TRNS + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_CAPSLOCK, KC_NUMLOCK, KC_TRNS ), }; diff --git a/keyboards/projectcain/vault45/vault45.h b/keyboards/projectcain/vault45/vault45.h index 031de0003a..b1217d6d06 100644 --- a/keyboards/projectcain/vault45/vault45.h +++ b/keyboards/projectcain/vault45/vault45.h @@ -26,7 +26,8 @@ * The second converts the arguments into a two-dimensional array which * represents the switch matrix. */ -#define LAYOUT( \ + +#define LAYOUT_all( \ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, \ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K112, \ K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, \ @@ -36,5 +37,54 @@ { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012 }, \ { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, KC_NO, K112 }, \ { K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212 }, \ - { KC_NO, K301, K302, KC_NO, K304, K305, K306, K307, K308, KC_NO, K310, K311, KC_NO }, \ + { KC_NO, K301, K302, KC_NO, K304, K305, K306, K307, K308, KC_NO, K310, K311, KC_NO } \ +} + +#define LAYOUT_split_4space( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K112, \ + K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, \ + K301, K302, K304, K305, K307, K308, K310, K311 \ +) \ +{ \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, KC_NO, K112 }, \ + { K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212 }, \ + { KC_NO, K301, K302, KC_NO, K304, K305, KC_NO, K307, K308, KC_NO, K310, K311, KC_NO } \ +} +#define LAYOUT_split_3space( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K112, \ + K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, \ + K301, K302, K305, K306, K307, K310, K311 \ +) \ +{ \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, KC_NO, K112 }, \ + { K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212 }, \ + { KC_NO, K301, K302, KC_NO, KC_NO, K305, K306, K307, KC_NO, KC_NO, K310, K311, KC_NO } \ +} +#define LAYOUT_split_2space( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K112, \ + K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, \ + K301, K302, K305, K307, K310, K311 \ +) \ +{ \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, KC_NO, K112 }, \ + { K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212 }, \ + { KC_NO, K301, K302, KC_NO, KC_NO, K305, KC_NO, K307, KC_NO, KC_NO, K310, K311, KC_NO } \ +} +#define LAYOUT_full_space( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K112, \ + K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, \ + K301, K302, K306, K310, K311 \ +) \ +{ \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, KC_NO, K112 }, \ + { K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212 }, \ + { KC_NO, K301, K302, KC_NO, KC_NO, KC_NO, K306, KC_NO, KC_NO, KC_NO, K310, K311, KC_NO } \ } From b29f0059360ae760d2c7215b72327a9b8050b0ff Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?P=C5=99emysl=20Eric=20Janouch?= <40222273+pjanx@users.noreply.github.com> Date: Wed, 27 Oct 2021 02:56:38 +0200 Subject: [PATCH 349/595] [Keymap] Add planck/pjanx and keebio/nyquist/pjanx keymaps (#13115) --- .../keebio/nyquist/keymaps/pjanx/config.h | 31 ++ .../keebio/nyquist/keymaps/pjanx/keymap.c | 113 ++++++ .../keebio/nyquist/keymaps/pjanx/rules.mk | 2 + keyboards/planck/keymaps/pjanx/config.h | 49 +++ keyboards/planck/keymaps/pjanx/keymap.c | 354 ++++++++++++++++++ keyboards/planck/keymaps/pjanx/readme.md | 2 + keyboards/planck/keymaps/pjanx/rules.mk | 2 + 7 files changed, 553 insertions(+) create mode 100644 keyboards/keebio/nyquist/keymaps/pjanx/config.h create mode 100644 keyboards/keebio/nyquist/keymaps/pjanx/keymap.c create mode 100644 keyboards/keebio/nyquist/keymaps/pjanx/rules.mk create mode 100644 keyboards/planck/keymaps/pjanx/config.h create mode 100644 keyboards/planck/keymaps/pjanx/keymap.c create mode 100644 keyboards/planck/keymaps/pjanx/readme.md create mode 100644 keyboards/planck/keymaps/pjanx/rules.mk diff --git a/keyboards/keebio/nyquist/keymaps/pjanx/config.h b/keyboards/keebio/nyquist/keymaps/pjanx/config.h new file mode 100644 index 0000000000..ef1c4a51ab --- /dev/null +++ b/keyboards/keebio/nyquist/keymaps/pjanx/config.h @@ -0,0 +1,31 @@ +/* +Copyright 2017 Danny Nguyen + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +// #define USE_I2C + +/* Select hand configuration */ +// #define MASTER_RIGHT +// #define EE_HANDS + +#undef RGBLED_NUM +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 12 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 diff --git a/keyboards/keebio/nyquist/keymaps/pjanx/keymap.c b/keyboards/keebio/nyquist/keymaps/pjanx/keymap.c new file mode 100644 index 0000000000..44a30063b8 --- /dev/null +++ b/keyboards/keebio/nyquist/keymaps/pjanx/keymap.c @@ -0,0 +1,113 @@ +/* Copyright 2015-2017 Jack Humbert + * Copyright 2021 Přemysl Eric Janouch + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +enum planck_layers { + _QWERTY, + _LOWER, + _RAISE, + _ADJUST +}; + +enum planck_keycodes { + UNUSED = SAFE_RANGE +}; + +#define LOWER MO(_LOWER) +#define RAISE MO(_RAISE) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |LCtrl | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |LShift| Z | X | C | V | B | N | M | , | . | / |RShift| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Esc | Caps | LGUI | LAlt |Lower | Space |Raise | RAlt | Down | Up |Enter | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = LAYOUT_ortho_4x12( + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_ESC, KC_CAPS, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_SPC, RAISE, KC_RALT, KC_DOWN, KC_UP, KC_ENT +), + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Ins | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |RCtrl | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | Home | End | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | RGUI | | | | | | Left | Vol- | Vol+ | Right| + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = LAYOUT_ortho_4x12( + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_INS, + KC_RCTL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),KC_HOME, KC_END, _______, + _______, KC_RGUI, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_VOLD, KC_VOLU, KC_RGHT +), + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Del | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |RCtrl | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | PgDn | PgUp | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | App | | | | | | Left | Vol- | Vol+ | Right| + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = LAYOUT_ortho_4x12( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, + KC_RCTL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_PGDN, KC_PGUP, _______, + _______, KC_APP, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_VOLD, KC_VOLU, KC_RGHT +), + +/* Adjust (Lower + Raise) + * v------------------------RGB CONTROL--------------------v + * ,-----------------------------------------------------------------------------------. + * | | Reset|Debug | RGB |RGBMOD| HUE+ | HUE- | SAT+ | SAT- |BRGTH+|BRGTH-| Del | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | |MUSmod|Aud on|Audoff|AGnorm|AGswap| | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof|TermOn|TermOf| | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | M1 | M2 | M3 | | | | | <- | vv | ^^ | -> | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = LAYOUT_ortho_4x12( + _______, RESET, DEBUG, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_DEL , + _______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, _______, _______, _______, _______, _______, + _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, TERM_ON, TERM_OFF, _______, _______, _______, + KC_MS_BTN1, KC_MS_BTN2, KC_MS_BTN3, _______, _______, _______, _______, _______, KC_MS_LEFT, KC_MS_DOWN, KC_MS_UP, KC_MS_RIGHT +) + +}; + +layer_state_t layer_state_set_user(layer_state_t state) { + return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST); +} diff --git a/keyboards/keebio/nyquist/keymaps/pjanx/rules.mk b/keyboards/keebio/nyquist/keymaps/pjanx/rules.mk new file mode 100644 index 0000000000..31710b1014 --- /dev/null +++ b/keyboards/keebio/nyquist/keymaps/pjanx/rules.mk @@ -0,0 +1,2 @@ +RGBLIGHT_ENABLE = yes +MOUSEKEY_ENABLE = yes diff --git a/keyboards/planck/keymaps/pjanx/config.h b/keyboards/planck/keymaps/pjanx/config.h new file mode 100644 index 0000000000..b38db026e0 --- /dev/null +++ b/keyboards/planck/keymaps/pjanx/config.h @@ -0,0 +1,49 @@ +/* Copyright 2015-2018 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#ifdef AUDIO_ENABLE + #define STARTUP_SONG SONG(PLANCK_SOUND) + // #define STARTUP_SONG SONG(NO_SOUND) + + #define DEFAULT_LAYER_SONGS { SONG(QWERTY_SOUND), \ + SONG(COLEMAK_SOUND), \ + SONG(DVORAK_SOUND) \ + } +#endif + +/* + * MIDI options + */ + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ + +#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +// Most tactile encoders have detents every 4 stages +#define ENCODER_RESOLUTION 4 + diff --git a/keyboards/planck/keymaps/pjanx/keymap.c b/keyboards/planck/keymaps/pjanx/keymap.c new file mode 100644 index 0000000000..cf2e52623d --- /dev/null +++ b/keyboards/planck/keymaps/pjanx/keymap.c @@ -0,0 +1,354 @@ +/* Copyright 2015-2017 Jack Humbert + * Copyright 2021 Přemysl Eric Janouch + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H +#include "muse.h" + + +enum planck_layers { + _QWERTY, + _COLEMAK, + _DVORAK, + _LOWER, + _RAISE, + _PLOVER, + _ADJUST +}; + +enum planck_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + PLOVER, + BACKLIT, + EXT_PLV +}; + +#define LOWER MO(_LOWER) +#define RAISE MO(_RAISE) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |LCtrl | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |LShift| Z | X | C | V | B | N | M | , | . | / |RShift| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Esc | Caps | LGUI | LAlt |Lower | Space |Raise | RAlt | Down | Up |Enter | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = LAYOUT_planck_grid( + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_ESC, KC_CAPS, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_SPC, RAISE, KC_RALT, KC_DOWN, KC_UP, KC_ENT +), + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_COLEMAK] = LAYOUT_planck_grid( + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, + KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , + BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT +), + +/* Dvorak + * ,-----------------------------------------------------------------------------------. + * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Esc | A | O | E | U | I | D | H | T | N | S | / | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_DVORAK] = LAYOUT_planck_grid( + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, + KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT , + BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT +), + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Ins | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |RCtrl | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | Home | End | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | RGUI | | | | | | Left | Vol- | Vol+ | Right| + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = LAYOUT_planck_grid( + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_INS, + KC_RCTL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),KC_HOME, KC_END, _______, + _______, KC_RGUI, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_VOLD, KC_VOLU, KC_RGHT +), + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Del | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |RCtrl | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | PgDn | PgUp | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | App | | | | | | Left | Vol- | Vol+ | Right| + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = LAYOUT_planck_grid( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, + KC_RCTL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_PGDN, KC_PGUP, _______, + _______, KC_APP, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_VOLD, KC_VOLU, KC_RGHT +), + +/* Plover layer (http://opensteno.org) + * ,-----------------------------------------------------------------------------------. + * | # | # | # | # | # | # | # | # | # | # | # | # | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | S | T | P | H | * | * | F | P | L | T | D | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | S | K | W | R | * | * | R | B | G | S | Z | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Exit | | | A | O | | E | U | | | | + * `-----------------------------------------------------------------------------------' + */ +[_PLOVER] = LAYOUT_planck_grid( + KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1 , + XXXXXXX, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, + XXXXXXX, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + EXT_PLV, XXXXXXX, XXXXXXX, KC_C, KC_V, XXXXXXX, XXXXXXX, KC_N, KC_M, XXXXXXX, XXXXXXX, XXXXXXX +), + +/* Adjust (Lower + Raise) + * v------------------------RGB CONTROL--------------------v + * ,-----------------------------------------------------------------------------------. + * | | Reset|Debug | RGB |RGBMOD| HUE+ | HUE- | SAT+ | SAT- |BRGTH+|BRGTH-| Del | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | |MUSmod|Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover| | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof|TermOn|TermOf| | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | M1 | M2 | M3 | | | | | <- | vv | ^^ | -> | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = LAYOUT_planck_grid( + _______, RESET, DEBUG, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_DEL , + _______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______, + _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, TERM_ON, TERM_OFF, _______, _______, _______, + KC_MS_BTN1, KC_MS_BTN2, KC_MS_BTN3, _______, _______, _______, _______, _______, KC_MS_LEFT, KC_MS_DOWN, KC_MS_UP, KC_MS_RIGHT +) + +}; + +#ifdef AUDIO_ENABLE + float plover_song[][2] = SONG(PLOVER_SOUND); + float plover_gb_song[][2] = SONG(PLOVER_GOODBYE_SOUND); +#endif + +layer_state_t layer_state_set_user(layer_state_t state) { + return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + print("mode just switched to qwerty and this is a huge string\n"); + set_single_persistent_default_layer(_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + set_single_persistent_default_layer(_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + set_single_persistent_default_layer(_DVORAK); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + #ifdef KEYBOARD_planck_rev5 + writePinLow(E6); + #endif + } else { + unregister_code(KC_RSFT); + #ifdef KEYBOARD_planck_rev5 + writePinHigh(E6); + #endif + } + return false; + break; + case PLOVER: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + stop_all_notes(); + PLAY_SONG(plover_song); + #endif + layer_off(_RAISE); + layer_off(_LOWER); + layer_off(_ADJUST); + layer_on(_PLOVER); + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } + keymap_config.raw = eeconfig_read_keymap(); + keymap_config.nkro = 1; + eeconfig_update_keymap(keymap_config.raw); + } + return false; + break; + case EXT_PLV: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_SONG(plover_gb_song); + #endif + layer_off(_PLOVER); + } + return false; + break; + } + return true; +} + +bool muse_mode = false; +uint8_t last_muse_note = 0; +uint16_t muse_counter = 0; +uint8_t muse_offset = 70; +uint16_t muse_tempo = 50; + +bool encoder_update(bool clockwise) { + if (muse_mode) { + if (IS_LAYER_ON(_RAISE)) { + if (clockwise) { + muse_offset++; + } else { + muse_offset--; + } + } else { + if (clockwise) { + muse_tempo+=1; + } else { + muse_tempo-=1; + } + } + } else { + if (clockwise) { + #ifdef MOUSEKEY_ENABLE + tap_code(KC_MS_WH_DOWN); + #else + tap_code(KC_PGDN); + #endif + } else { + #ifdef MOUSEKEY_ENABLE + tap_code(KC_MS_WH_UP); + #else + tap_code(KC_PGUP); + #endif + } + } + return true; +} + +bool dip_switch_update_user(uint8_t index, bool active) { + switch (index) { + case 0: { +#ifdef AUDIO_ENABLE + static bool play_sound = false; +#endif + if (active) { +#ifdef AUDIO_ENABLE + if (play_sound) { PLAY_SONG(plover_song); } +#endif + layer_on(_ADJUST); + } else { +#ifdef AUDIO_ENABLE + if (play_sound) { PLAY_SONG(plover_gb_song); } +#endif + layer_off(_ADJUST); + } +#ifdef AUDIO_ENABLE + play_sound = true; +#endif + break; + } + case 1: + if (active) { + muse_mode = true; + } else { + muse_mode = false; + } + } + return true; +} + +void matrix_scan_user(void) { +#ifdef AUDIO_ENABLE + if (muse_mode) { + if (muse_counter == 0) { + uint8_t muse_note = muse_offset + SCALE[muse_clock_pulse()]; + if (muse_note != last_muse_note) { + stop_note(compute_freq_for_midi_note(last_muse_note)); + play_note(compute_freq_for_midi_note(muse_note), 0xF); + last_muse_note = muse_note; + } + } + muse_counter = (muse_counter + 1) % muse_tempo; + } else { + if (muse_counter) { + stop_all_notes(); + muse_counter = 0; + } + } +#endif +} + +bool music_mask_user(uint16_t keycode) { + switch (keycode) { + case RAISE: + case LOWER: + return false; + default: + return true; + } +} diff --git a/keyboards/planck/keymaps/pjanx/readme.md b/keyboards/planck/keymaps/pjanx/readme.md new file mode 100644 index 0000000000..e53397847d --- /dev/null +++ b/keyboards/planck/keymaps/pjanx/readme.md @@ -0,0 +1,2 @@ +# Modified Default Planck Layout + diff --git a/keyboards/planck/keymaps/pjanx/rules.mk b/keyboards/planck/keymaps/pjanx/rules.mk new file mode 100644 index 0000000000..3a551bd429 --- /dev/null +++ b/keyboards/planck/keymaps/pjanx/rules.mk @@ -0,0 +1,2 @@ +SRC += muse.c +MOUSEKEY_ENABLE = yes From ee23aae87fac7b5dca24c1f150465bae1c66cb6c Mon Sep 17 00:00:00 2001 From: Chad Austin Date: Tue, 26 Oct 2021 20:01:57 -0700 Subject: [PATCH 350/595] Optimize matrix scanning by removing variable shifts (#14947) --- docs/custom_quantum_functions.md | 2 +- quantum/matrix.c | 23 +++++++++++++---------- 2 files changed, 14 insertions(+), 11 deletions(-) diff --git a/docs/custom_quantum_functions.md b/docs/custom_quantum_functions.md index 463366ff76..798c346e67 100644 --- a/docs/custom_quantum_functions.md +++ b/docs/custom_quantum_functions.md @@ -149,7 +149,7 @@ This is useful for setting up stuff that you may need elsewhere, but isn't hardw * GPIO pin initialisation: `void matrix_init_pins(void)` * This needs to perform the low-level initialisation of all row and column pins. By default this will initialise the input/output state of each of the GPIO pins listed in `MATRIX_ROW_PINS` and `MATRIX_COL_PINS`, based on whether or not the keyboard is set up for `ROW2COL`, `COL2ROW`, or `DIRECT_PINS`. Should the keyboard designer override this function, no initialisation of pin state will occur within QMK itself, instead deferring to the keyboard's override. * `COL2ROW`-based row reads: `void matrix_read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)` -* `ROW2COL`-based column reads: `void matrix_read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)` +* `ROW2COL`-based column reads: `void matrix_read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col, matrix_row_t row_shifter)` * `DIRECT_PINS`-based reads: `void matrix_read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)` * These three functions need to perform the low-level retrieval of matrix state of relevant input pins, based on the matrix type. Only one of the functions should be implemented, if needed. By default this will iterate through `MATRIX_ROW_PINS` and `MATRIX_COL_PINS`, configuring the inputs and outputs based on whether or not the keyboard is set up for `ROW2COL`, `COL2ROW`, or `DIRECT_PINS`. Should the keyboard designer override this function, no manipulation of matrix GPIO pin state will occur within QMK itself, instead deferring to the keyboard's override. diff --git a/quantum/matrix.c b/quantum/matrix.c index 4fbcc2419c..483d518ecc 100644 --- a/quantum/matrix.c +++ b/quantum/matrix.c @@ -69,7 +69,7 @@ uint8_t thisHand, thatHand; // user-defined overridable functions __attribute__((weak)) void matrix_init_pins(void); __attribute__((weak)) void matrix_read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row); -__attribute__((weak)) void matrix_read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col); +__attribute__((weak)) void matrix_read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col, matrix_row_t row_shifter); #ifdef SPLIT_KEYBOARD __attribute__((weak)) void matrix_slave_scan_kb(void) { matrix_slave_scan_user(); } __attribute__((weak)) void matrix_slave_scan_user(void) {} @@ -113,10 +113,11 @@ __attribute__((weak)) void matrix_read_cols_on_row(matrix_row_t current_matrix[] // Start with a clear matrix row matrix_row_t current_row_value = 0; - for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) { + matrix_row_t row_shifter = MATRIX_ROW_SHIFTER; + for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++, row_shifter <<= 1) { pin_t pin = direct_pins[current_row][col_index]; if (pin != NO_PIN) { - current_row_value |= readPin(pin) ? 0 : (MATRIX_ROW_SHIFTER << col_index); + current_row_value |= readPin(pin) ? 0 : row_shifter; } } @@ -169,11 +170,12 @@ __attribute__((weak)) void matrix_read_cols_on_row(matrix_row_t current_matrix[] matrix_output_select_delay(); // For each col... - for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) { + matrix_row_t row_shifter = MATRIX_ROW_SHIFTER; + for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++, row_shifter <<= 1) { uint8_t pin_state = readMatrixPin(col_pins[col_index]); // Populate the matrix row with the state of the col pin - current_row_value |= pin_state ? 0 : (MATRIX_ROW_SHIFTER << col_index); + current_row_value |= pin_state ? 0 : row_shifter; } // Unselect row @@ -217,7 +219,7 @@ __attribute__((weak)) void matrix_init_pins(void) { } } -__attribute__((weak)) void matrix_read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) { +__attribute__((weak)) void matrix_read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col, matrix_row_t row_shifter) { bool key_pressed = false; // Select col @@ -231,11 +233,11 @@ __attribute__((weak)) void matrix_read_rows_on_col(matrix_row_t current_matrix[] // Check row pin state if (readMatrixPin(row_pins[row_index]) == 0) { // Pin LO, set col bit - current_matrix[row_index] |= (MATRIX_ROW_SHIFTER << current_col); + current_matrix[row_index] |= row_shifter; key_pressed = true; } else { // Pin HI, clear col bit - current_matrix[row_index] &= ~(MATRIX_ROW_SHIFTER << current_col); + current_matrix[row_index] &= ~row_shifter; } } @@ -347,8 +349,9 @@ uint8_t matrix_scan(void) { } #elif (DIODE_DIRECTION == ROW2COL) // Set col, read rows - for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { - matrix_read_rows_on_col(curr_matrix, current_col); + matrix_row_t row_shifter = MATRIX_ROW_SHIFTER; + for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++, row_shifter <<= 1) { + matrix_read_rows_on_col(curr_matrix, current_col, row_shifter); } #endif From 2ac9b31ed1ee45e82ce0ac87680b82e510d481fa Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Wed, 27 Oct 2021 07:47:42 -0700 Subject: [PATCH 351/595] Fix white spacing issues in kb files (#14963) --- .../checkerboards/phoenix45_ortho/info.json | 30 ++-- .../vault35/keymaps/default/config.h | 48 +++---- .../vault35/keymaps/default/keymap.c | 132 +++++++++--------- keyboards/projectcain/vault35/vault35.c | 56 ++++---- 4 files changed, 133 insertions(+), 133 deletions(-) diff --git a/keyboards/checkerboards/phoenix45_ortho/info.json b/keyboards/checkerboards/phoenix45_ortho/info.json index f5c02caeff..e64e67abbf 100644 --- a/keyboards/checkerboards/phoenix45_ortho/info.json +++ b/keyboards/checkerboards/phoenix45_ortho/info.json @@ -1,16 +1,16 @@ -{ - "keyboard_name": "Phoenix45_Ortho", - "url": "www.checkerboards.xyz", - "maintainer": "nasp", - "layouts": { - "LAYOUT_ortho_2x225u": { - "layout": [{"label":"Tab", "x":0, "y":0}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"x":11, "y":0}, {"label":"Back Space", "x":12, "y":0}, {"label":"Esc", "x":0, "y":1}, {"label":"A", "x":1, "y":1}, {"label":"S", "x":2, "y":1}, {"label":"D", "x":3, "y":1}, {"label":"F", "x":4, "y":1}, {"label":"G", "x":5, "y":1}, {"label":"H", "x":6, "y":1}, {"label":"J", "x":7, "y":1}, {"label":"K", "x":8, "y":1}, {"label":"L", "x":9, "y":1}, {"label":";", "x":10, "y":1}, {"x":11, "y":1}, {"label":"'", "x":12, "y":1}, {"label":"Shift", "x":0, "y":2}, {"label":"Z", "x":1, "y":2}, {"label":"X", "x":2, "y":2}, {"label":"C", "x":3, "y":2}, {"label":"V", "x":4, "y":2}, {"label":"B", "x":5, "y":2}, {"label":"N", "x":6, "y":2}, {"label":"M", "x":7, "y":2}, {"label":",", "x":8, "y":2}, {"label":".", "x":9, "y":2}, {"label":"/", "x":10, "y":2}, {"x":11, "y":2}, {"label":"Return", "x":12, "y":2}, {"label":"Hyper", "x":0, "y":3, "w":1.25}, {"label":"Super", "x":1.25, "y":3}, {"label":"Meta", "x":2.25, "y":3, "w":1.5}, {"x":3.75, "y":3, "w":2.25}, {"label":"Fn", "x":6, "y":3}, {"x":7, "y":3, "w":2.25}, {"label":"Meta", "x":9.25, "y":3, "w":1.5}, {"label":"Super", "x":10.75, "y":3}, {"label":"Hyper", "x":11.75, "y":3, "w":1.25}] - }, - "LAYOUT_ortho_2x3u": { - "layout": [{"label":"Tab", "x":0, "y":0}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"x":11, "y":0}, {"label":"Back Space", "x":12, "y":0}, {"label":"Esc", "x":0, "y":1}, {"label":"A", "x":1, "y":1}, {"label":"S", "x":2, "y":1}, {"label":"D", "x":3, "y":1}, {"label":"F", "x":4, "y":1}, {"label":"G", "x":5, "y":1}, {"label":"H", "x":6, "y":1}, {"label":"J", "x":7, "y":1}, {"label":"K", "x":8, "y":1}, {"label":"L", "x":9, "y":1}, {"label":";", "x":10, "y":1}, {"x":11, "y":1}, {"label":"'", "x":12, "y":1}, {"label":"Shift", "x":0, "y":2}, {"label":"Z", "x":1, "y":2}, {"label":"X", "x":2, "y":2}, {"label":"C", "x":3, "y":2}, {"label":"V", "x":4, "y":2}, {"label":"B", "x":5, "y":2}, {"label":"N", "x":6, "y":2}, {"label":"M", "x":7, "y":2}, {"label":",", "x":8, "y":2}, {"label":".", "x":9, "y":2}, {"label":"/", "x":10, "y":2}, {"x":11, "y":2}, {"label":"Return", "x":12, "y":2}, {"label":"Hyper", "x":0, "y":3, "w":1.25}, {"label":"Super", "x":1.25, "y":3}, {"label":"Meta", "x":2.25, "y":3, "w":1.25}, {"x":3.5, "y":3, "w":3}, {"x":6.5, "y":3, "w":3}, {"label":"Meta", "x":9.5, "y":3, "w":1.25}, {"label":"Super", "x":10.75, "y":3}, {"label":"Hyper", "x":11.75, "y":3, "w":1.25}] - }, -"LAYOUT_ortho_6u": { - "layout": [{"label":"Tab", "x":0, "y":0}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"x":11, "y":0}, {"label":"Back Space", "x":12, "y":0}, {"label":"Esc", "x":0, "y":1}, {"label":"A", "x":1, "y":1}, {"label":"S", "x":2, "y":1}, {"label":"D", "x":3, "y":1}, {"label":"F", "x":4, "y":1}, {"label":"G", "x":5, "y":1}, {"label":"H", "x":6, "y":1}, {"label":"J", "x":7, "y":1}, {"label":"K", "x":8, "y":1}, {"label":"L", "x":9, "y":1}, {"label":";", "x":10, "y":1}, {"x":11, "y":1}, {"label":"'", "x":12, "y":1}, {"label":"Shift", "x":0, "y":2}, {"label":"Z", "x":1, "y":2}, {"label":"X", "x":2, "y":2}, {"label":"C", "x":3, "y":2}, {"label":"V", "x":4, "y":2}, {"label":"B", "x":5, "y":2}, {"label":"N", "x":6, "y":2}, {"label":"M", "x":7, "y":2}, {"label":",", "x":8, "y":2}, {"label":".", "x":9, "y":2}, {"label":"/", "x":10, "y":2}, {"x":11, "y":2}, {"label":"Return", "x":12, "y":2}, {"label":"Hyper", "x":0, "y":3, "w":1.25}, {"label":"Super", "x":1.25, "y":3}, {"label":"Meta", "x":2.25, "y":3, "w":1.25}, {"label":"", "x":3.5, "y":3, "w":6}, {"label":"Meta", "x":9.5, "y":3, "w":1.25}, {"label":"Super", "x":10.75, "y":3}, {"label":"Hyper", "x":11.75, "y":3, "w":1.25}] - } - } +{ + "keyboard_name": "Phoenix45_Ortho", + "url": "www.checkerboards.xyz", + "maintainer": "nasp", + "layouts": { + "LAYOUT_ortho_2x225u": { + "layout": [{"label":"Tab", "x":0, "y":0}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"x":11, "y":0}, {"label":"Back Space", "x":12, "y":0}, {"label":"Esc", "x":0, "y":1}, {"label":"A", "x":1, "y":1}, {"label":"S", "x":2, "y":1}, {"label":"D", "x":3, "y":1}, {"label":"F", "x":4, "y":1}, {"label":"G", "x":5, "y":1}, {"label":"H", "x":6, "y":1}, {"label":"J", "x":7, "y":1}, {"label":"K", "x":8, "y":1}, {"label":"L", "x":9, "y":1}, {"label":";", "x":10, "y":1}, {"x":11, "y":1}, {"label":"'", "x":12, "y":1}, {"label":"Shift", "x":0, "y":2}, {"label":"Z", "x":1, "y":2}, {"label":"X", "x":2, "y":2}, {"label":"C", "x":3, "y":2}, {"label":"V", "x":4, "y":2}, {"label":"B", "x":5, "y":2}, {"label":"N", "x":6, "y":2}, {"label":"M", "x":7, "y":2}, {"label":",", "x":8, "y":2}, {"label":".", "x":9, "y":2}, {"label":"/", "x":10, "y":2}, {"x":11, "y":2}, {"label":"Return", "x":12, "y":2}, {"label":"Hyper", "x":0, "y":3, "w":1.25}, {"label":"Super", "x":1.25, "y":3}, {"label":"Meta", "x":2.25, "y":3, "w":1.5}, {"x":3.75, "y":3, "w":2.25}, {"label":"Fn", "x":6, "y":3}, {"x":7, "y":3, "w":2.25}, {"label":"Meta", "x":9.25, "y":3, "w":1.5}, {"label":"Super", "x":10.75, "y":3}, {"label":"Hyper", "x":11.75, "y":3, "w":1.25}] + }, + "LAYOUT_ortho_2x3u": { + "layout": [{"label":"Tab", "x":0, "y":0}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"x":11, "y":0}, {"label":"Back Space", "x":12, "y":0}, {"label":"Esc", "x":0, "y":1}, {"label":"A", "x":1, "y":1}, {"label":"S", "x":2, "y":1}, {"label":"D", "x":3, "y":1}, {"label":"F", "x":4, "y":1}, {"label":"G", "x":5, "y":1}, {"label":"H", "x":6, "y":1}, {"label":"J", "x":7, "y":1}, {"label":"K", "x":8, "y":1}, {"label":"L", "x":9, "y":1}, {"label":";", "x":10, "y":1}, {"x":11, "y":1}, {"label":"'", "x":12, "y":1}, {"label":"Shift", "x":0, "y":2}, {"label":"Z", "x":1, "y":2}, {"label":"X", "x":2, "y":2}, {"label":"C", "x":3, "y":2}, {"label":"V", "x":4, "y":2}, {"label":"B", "x":5, "y":2}, {"label":"N", "x":6, "y":2}, {"label":"M", "x":7, "y":2}, {"label":",", "x":8, "y":2}, {"label":".", "x":9, "y":2}, {"label":"/", "x":10, "y":2}, {"x":11, "y":2}, {"label":"Return", "x":12, "y":2}, {"label":"Hyper", "x":0, "y":3, "w":1.25}, {"label":"Super", "x":1.25, "y":3}, {"label":"Meta", "x":2.25, "y":3, "w":1.25}, {"x":3.5, "y":3, "w":3}, {"x":6.5, "y":3, "w":3}, {"label":"Meta", "x":9.5, "y":3, "w":1.25}, {"label":"Super", "x":10.75, "y":3}, {"label":"Hyper", "x":11.75, "y":3, "w":1.25}] + }, +"LAYOUT_ortho_6u": { + "layout": [{"label":"Tab", "x":0, "y":0}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0}, {"label":"T", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"x":11, "y":0}, {"label":"Back Space", "x":12, "y":0}, {"label":"Esc", "x":0, "y":1}, {"label":"A", "x":1, "y":1}, {"label":"S", "x":2, "y":1}, {"label":"D", "x":3, "y":1}, {"label":"F", "x":4, "y":1}, {"label":"G", "x":5, "y":1}, {"label":"H", "x":6, "y":1}, {"label":"J", "x":7, "y":1}, {"label":"K", "x":8, "y":1}, {"label":"L", "x":9, "y":1}, {"label":";", "x":10, "y":1}, {"x":11, "y":1}, {"label":"'", "x":12, "y":1}, {"label":"Shift", "x":0, "y":2}, {"label":"Z", "x":1, "y":2}, {"label":"X", "x":2, "y":2}, {"label":"C", "x":3, "y":2}, {"label":"V", "x":4, "y":2}, {"label":"B", "x":5, "y":2}, {"label":"N", "x":6, "y":2}, {"label":"M", "x":7, "y":2}, {"label":",", "x":8, "y":2}, {"label":".", "x":9, "y":2}, {"label":"/", "x":10, "y":2}, {"x":11, "y":2}, {"label":"Return", "x":12, "y":2}, {"label":"Hyper", "x":0, "y":3, "w":1.25}, {"label":"Super", "x":1.25, "y":3}, {"label":"Meta", "x":2.25, "y":3, "w":1.25}, {"label":"", "x":3.5, "y":3, "w":6}, {"label":"Meta", "x":9.5, "y":3, "w":1.25}, {"label":"Super", "x":10.75, "y":3}, {"label":"Hyper", "x":11.75, "y":3, "w":1.25}] + } + } } \ No newline at end of file diff --git a/keyboards/projectcain/vault35/keymaps/default/config.h b/keyboards/projectcain/vault35/keymaps/default/config.h index 6d8aa3d81a..35f670c86b 100644 --- a/keyboards/projectcain/vault35/keymaps/default/config.h +++ b/keyboards/projectcain/vault35/keymaps/default/config.h @@ -1,24 +1,24 @@ -/* Copyright 2021 projectcain - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -#define ENCODERS_PAD_A { D6 } -#define ENCODERS_PAD_B { D7 } -#define ENCODER_RESOLUTION 2 -#define COMBO_COUNT 2 -#define COMBO_TERM 50 -#define TAPPING_FORCE_HOLD +/* Copyright 2021 projectcain + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#define ENCODERS_PAD_A { D6 } +#define ENCODERS_PAD_B { D7 } +#define ENCODER_RESOLUTION 2 +#define COMBO_COUNT 2 +#define COMBO_TERM 50 +#define TAPPING_FORCE_HOLD diff --git a/keyboards/projectcain/vault35/keymaps/default/keymap.c b/keyboards/projectcain/vault35/keymaps/default/keymap.c index 454e2a07ed..05fb05b760 100644 --- a/keyboards/projectcain/vault35/keymaps/default/keymap.c +++ b/keyboards/projectcain/vault35/keymaps/default/keymap.c @@ -1,66 +1,66 @@ - - /* Copyright 2021 projectcain - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include QMK_KEYBOARD_H -enum layers{ - BASE, - NUM, - SYM, - META -}; - - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [BASE] = LAYOUT_split_4space( - - KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, - KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOTE, - KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, - LALT(KC_TAB), MO(1), SFT_T(KC_BSPC), KC_SPACE, MO(2), RESET - ), - - [NUM] = LAYOUT_split_4space( - - KC_PGUP, KC_HOME, KC_UP, KC_END, KC_WBAK, KC_PSLS, KC_7, KC_8, KC_9, KC_PMNS, KC_DEL, - KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, KC_WFWD, KC_PAST, KC_4, KC_5, KC_6, KC_PPLS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_0, KC_1, KC_2, KC_3, KC_PDOT, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RALT(KC_F4), RALT(KC_F4) - ), - - [SYM] = LAYOUT_split_4space( - - S(KC_GRV), KC_GRV, KC_BSLS, S(KC_BSLS), KC_TRNS, KC_TRNS, S(KC_MINS), KC_EQL, KC_TRNS, C(KC_W), C(KC_T), - S(KC_1), S(KC_2), S(KC_3), S(KC_4), S(KC_5), S(KC_6), S(KC_7), S(KC_8), KC_SCLN, S(KC_SCLN), - KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NUMLOCK, KC_TRNS - ), - -}; - - -enum combos { - KL_SLSH, - JK_MINUS -}; - -const uint16_t PROGMEM kl_combo[] = {KC_K, KC_L, COMBO_END}; -const uint16_t PROGMEM jk_combo[] = {KC_J, KC_K, COMBO_END}; - -combo_t key_combos[COMBO_COUNT] = { - [KL_SLSH] = COMBO(kl_combo, S(KC_SLSH)), - [JK_MINUS] = COMBO(jk_combo, KC_MINUS) -}; + + /* Copyright 2021 projectcain + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H +enum layers{ + BASE, + NUM, + SYM, + META +}; + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [BASE] = LAYOUT_split_4space( + + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_QUOTE, + KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, + LALT(KC_TAB), MO(1), SFT_T(KC_BSPC), KC_SPACE, MO(2), RESET + ), + + [NUM] = LAYOUT_split_4space( + + KC_PGUP, KC_HOME, KC_UP, KC_END, KC_WBAK, KC_PSLS, KC_7, KC_8, KC_9, KC_PMNS, KC_DEL, + KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, KC_WFWD, KC_PAST, KC_4, KC_5, KC_6, KC_PPLS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_0, KC_1, KC_2, KC_3, KC_PDOT, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RALT(KC_F4), RALT(KC_F4) + ), + + [SYM] = LAYOUT_split_4space( + + S(KC_GRV), KC_GRV, KC_BSLS, S(KC_BSLS), KC_TRNS, KC_TRNS, S(KC_MINS), KC_EQL, KC_TRNS, C(KC_W), C(KC_T), + S(KC_1), S(KC_2), S(KC_3), S(KC_4), S(KC_5), S(KC_6), S(KC_7), S(KC_8), KC_SCLN, S(KC_SCLN), + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NUMLOCK, KC_TRNS + ), + +}; + + +enum combos { + KL_SLSH, + JK_MINUS +}; + +const uint16_t PROGMEM kl_combo[] = {KC_K, KC_L, COMBO_END}; +const uint16_t PROGMEM jk_combo[] = {KC_J, KC_K, COMBO_END}; + +combo_t key_combos[COMBO_COUNT] = { + [KL_SLSH] = COMBO(kl_combo, S(KC_SLSH)), + [JK_MINUS] = COMBO(jk_combo, KC_MINUS) +}; diff --git a/keyboards/projectcain/vault35/vault35.c b/keyboards/projectcain/vault35/vault35.c index 9a83d47ad1..2bb1675a1f 100644 --- a/keyboards/projectcain/vault35/vault35.c +++ b/keyboards/projectcain/vault35/vault35.c @@ -1,29 +1,29 @@ -/* Copyright 2021 projectcain - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include "vault35.h" - -bool encoder_update_kb(uint8_t index, bool clockwise) { - if (!encoder_update_user(index, clockwise)) { return false; } - if (index == 0) { /* First encoder */ - if (clockwise) { - tap_code(KC_PGDN); - } else { - tap_code(KC_PGUP); - } - } - return true; +/* Copyright 2021 projectcain + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "vault35.h" + +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + if (index == 0) { /* First encoder */ + if (clockwise) { + tap_code(KC_PGDN); + } else { + tap_code(KC_PGUP); + } + } + return true; } \ No newline at end of file From 0b0edf3d81ec0d5494691987f1b1e695fdc35ca5 Mon Sep 17 00:00:00 2001 From: jfescobar18 <81986725+jfescobar18@users.noreply.github.com> Date: Wed, 27 Oct 2021 09:59:58 -0500 Subject: [PATCH 352/595] [Keyboard] Docs/folder organization and info json fixed (#14239) Co-authored-by: Ryan --- .../{ => mechanickeys}/undead60m/config.h | 30 +++++++++---------- keyboards/mechanickeys/undead60m/info.json | 16 ++++++++++ .../undead60m/keymaps/default/keymap.c | 2 +- .../undead60m/keymaps/via/keymap.c | 2 +- .../undead60m/keymaps/via/rules.mk | 0 .../{ => mechanickeys}/undead60m/readme.md | 0 .../{ => mechanickeys}/undead60m/rules.mk | 0 .../{ => mechanickeys}/undead60m/undead60m.c | 4 +-- .../{ => mechanickeys}/undead60m/undead60m.h | 2 +- keyboards/undead60m/info.json | 16 ---------- 10 files changed, 36 insertions(+), 36 deletions(-) rename keyboards/{ => mechanickeys}/undead60m/config.h (70%) create mode 100644 keyboards/mechanickeys/undead60m/info.json rename keyboards/{ => mechanickeys}/undead60m/keymaps/default/keymap.c (99%) rename keyboards/{ => mechanickeys}/undead60m/keymaps/via/keymap.c (99%) rename keyboards/{ => mechanickeys}/undead60m/keymaps/via/rules.mk (100%) rename keyboards/{ => mechanickeys}/undead60m/readme.md (100%) rename keyboards/{ => mechanickeys}/undead60m/rules.mk (100%) rename keyboards/{ => mechanickeys}/undead60m/undead60m.c (97%) rename keyboards/{ => mechanickeys}/undead60m/undead60m.h (97%) delete mode 100644 keyboards/undead60m/info.json diff --git a/keyboards/undead60m/config.h b/keyboards/mechanickeys/undead60m/config.h similarity index 70% rename from keyboards/undead60m/config.h rename to keyboards/mechanickeys/undead60m/config.h index a307b5db66..e819cf9971 100644 --- a/keyboards/undead60m/config.h +++ b/keyboards/mechanickeys/undead60m/config.h @@ -1,18 +1,18 @@ -/* -Copyright 2021 Franciso Escobar -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ +/* Copyright 2021 jfescobar18 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . +*/ #pragma once diff --git a/keyboards/mechanickeys/undead60m/info.json b/keyboards/mechanickeys/undead60m/info.json new file mode 100644 index 0000000000..e1fd210aab --- /dev/null +++ b/keyboards/mechanickeys/undead60m/info.json @@ -0,0 +1,16 @@ +{ + "keyboard_name": "Undead-60M", + "url": "", + "maintainer": "qmk", + "layouts": { + "LAYOUT": { + "layout": [ + {"label": "F1", "x": 0, "y": 0}, {"label": "F2", "x": 1, "y": 0}, {"label": "Esc", "x": 2.5, "y": 0}, {"label": "1", "x": 3.5, "y": 0}, {"label": "2", "x": 4.5, "y": 0}, {"label": "3", "x": 5.5, "y": 0}, {"label": "4", "x": 6.5, "y": 0}, {"label": "5", "x": 7.5, "y": 0}, {"label": "6", "x": 8.5, "y": 0}, {"label": "7", "x": 9.5, "y": 0}, {"label": "8", "x": 10.5, "y": 0}, {"label": "9", "x": 11.5, "y": 0}, {"label": "0", "x": 12.5, "y": 0}, {"label": "-", "x": 13.5, "y": 0}, {"label": "=", "x": 14.5, "y": 0}, {"label": "Backspace", "x": 15.5, "y": 0, "w": 2}, + {"label": "F2", "x": 0, "y": 1}, {"label": "F3", "x": 1, "y": 1}, {"label": "Tab", "x": 2.5, "y": 1, "w": 1.5} , {"label": "Q", "x": 4, "y": 1}, {"label": "W", "x": 5, "y": 1}, {"label": "E", "x": 6, "y": 1}, {"label": "R", "x": 7, "y": 1}, {"label": "T", "x": 8, "y": 1}, {"label": "Y", "x": 9, "y": 1}, {"label": "U", "x": 10, "y": 1}, {"label": "I", "x": 11, "y": 1}, {"label": "O", "x": 12, "y": 1}, {"label": "P", "x": 13, "y": 1}, {"label": "[", "x": 14, "y": 1}, {"label": "]", "x": 15, "y": 1}, {"label": "|", "x": 16, "y": 1, "w": 1.5}, + {"label": "F4", "x": 0, "y": 2}, {"label": "F5", "x": 1, "y": 2}, {"label": "Caps", "x": 2.5, "y": 2, "w": 1.75}, {"label": "A", "x": 4.25, "y": 2}, {"label": "S", "x": 5.25, "y": 2}, {"label": "D", "x": 6.25, "y": 2}, {"label": "F", "x": 7.25, "y": 2}, {"label": "G", "x": 8.25, "y": 2}, {"label": "H", "x": 9.25, "y": 2}, {"label": "J", "x": 10.25, "y": 2}, {"label": "K", "x": 11.25, "y": 2}, {"label": "L", "x": 12.25, "y": 2}, {"label": ";", "x": 13.25, "y": 2}, {"label": "'", "x": 14.25, "y": 2}, {"label": "Enter", "x": 15.25, "y": 2, "w": 2.25}, + {"label": "F6", "x": 0, "y": 3}, {"label": "F7", "x": 1, "y": 3}, {"label": "Shift", "x": 2.5, "y": 3, "w": 2.25}, {"label": "Z", "x": 4.5, "y": 3}, {"label": "X", "x": 5.5, "y": 3}, {"label": "C", "x": 6.5, "y": 3}, {"label": "V", "x": 7.5, "y": 3}, {"label": "B", "x": 8.5, "y": 3}, {"label": "N", "x": 9.5, "y": 3}, {"label": "M", "x": 10.5, "y": 3}, {"label": ",", "x": 11.5, "y": 3}, {"label": ".", "x": 12.5, "y": 3}, {"label": "/", "x": 13.5, "y": 3}, {"label": "Shift", "x": 14.5, "y": 3, "w": 2.75}, + {"label": "F1", "x": 0, "y": 4}, {"label": "F2", "x": 1, "y": 4}, {"label": "Ctrl", "x": 2.5, "y": 4, "w": 1.25}, {"label": "OS", "x": 3.75, "y": 4, "w": 1.25}, {"label": "Alt", "x": 5, "y": 4, "w": 1.25}, {"label": "Space", "x": 6.25, "y": 4}, {"label": "Alt", "x": 12.5, "y": 4, "w": 1.25}, {"label": "OS", "x": 13.75, "y": 4, "w": 1.25}, {"label": "Ctrl", "x": 15, "y": 4, "w": 1.25}, {"label": "Fn", "x": 16.25, "y": 4, "w": 1.25} + ] + } + } +} diff --git a/keyboards/undead60m/keymaps/default/keymap.c b/keyboards/mechanickeys/undead60m/keymaps/default/keymap.c similarity index 99% rename from keyboards/undead60m/keymaps/default/keymap.c rename to keyboards/mechanickeys/undead60m/keymaps/default/keymap.c index 7760a671ee..084049f09b 100644 --- a/keyboards/undead60m/keymaps/default/keymap.c +++ b/keyboards/mechanickeys/undead60m/keymaps/default/keymap.c @@ -1,4 +1,4 @@ -/* Copyright 2021 Francisco Escobar +/* Copyright 2021 jfescobar18 * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/keyboards/undead60m/keymaps/via/keymap.c b/keyboards/mechanickeys/undead60m/keymaps/via/keymap.c similarity index 99% rename from keyboards/undead60m/keymaps/via/keymap.c rename to keyboards/mechanickeys/undead60m/keymaps/via/keymap.c index 9ab159ab1c..1bd56eadbf 100644 --- a/keyboards/undead60m/keymaps/via/keymap.c +++ b/keyboards/mechanickeys/undead60m/keymaps/via/keymap.c @@ -1,4 +1,4 @@ -/* Copyright 2021 Francisco Escobar +/* Copyright 2021 jfescobar18 * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/keyboards/undead60m/keymaps/via/rules.mk b/keyboards/mechanickeys/undead60m/keymaps/via/rules.mk similarity index 100% rename from keyboards/undead60m/keymaps/via/rules.mk rename to keyboards/mechanickeys/undead60m/keymaps/via/rules.mk diff --git a/keyboards/undead60m/readme.md b/keyboards/mechanickeys/undead60m/readme.md similarity index 100% rename from keyboards/undead60m/readme.md rename to keyboards/mechanickeys/undead60m/readme.md diff --git a/keyboards/undead60m/rules.mk b/keyboards/mechanickeys/undead60m/rules.mk similarity index 100% rename from keyboards/undead60m/rules.mk rename to keyboards/mechanickeys/undead60m/rules.mk diff --git a/keyboards/undead60m/undead60m.c b/keyboards/mechanickeys/undead60m/undead60m.c similarity index 97% rename from keyboards/undead60m/undead60m.c rename to keyboards/mechanickeys/undead60m/undead60m.c index 5cedd10e8d..1bda4b1bd8 100644 --- a/keyboards/undead60m/undead60m.c +++ b/keyboards/mechanickeys/undead60m/undead60m.c @@ -1,4 +1,4 @@ - /* Copyright 2021 Francisco Escobar +/* Copyright 2021 jfescobar18 * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -12,7 +12,7 @@ * * You should have received a copy of the GNU General Public License * along with this program. If not, see . - */ +*/ #include "undead60m.h" bool encoder_update_kb(uint8_t index, bool clockwise) { diff --git a/keyboards/undead60m/undead60m.h b/keyboards/mechanickeys/undead60m/undead60m.h similarity index 97% rename from keyboards/undead60m/undead60m.h rename to keyboards/mechanickeys/undead60m/undead60m.h index 2d71e9640f..4bc665ffd8 100644 --- a/keyboards/undead60m/undead60m.h +++ b/keyboards/mechanickeys/undead60m/undead60m.h @@ -1,4 +1,4 @@ -/* Copyright 2021 Francisco Escobar +/* Copyright 2021 jfescobar18 * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/keyboards/undead60m/info.json b/keyboards/undead60m/info.json deleted file mode 100644 index 81f5a220af..0000000000 --- a/keyboards/undead60m/info.json +++ /dev/null @@ -1,16 +0,0 @@ -{ - "keyboard_name": "Undead-60M", - "url": "", - "maintainer": "qmk", - "layouts": { - "LAYOUT": { - "layout": [ - {"label": "F1", "x": 0, "y": 0}, {"label": "F2", "x": 1, "y": 0}, {"label": "Esc", "x": 3.5, "y": 0}, {"label": "1", "x": 4.5, "y": 0}, {"label": "2", "x": 5.5, "y": 0}, {"label": "3", "x": 6.5, "y": 0}, {"label": "4", "x": 7.5, "y": 0}, {"label": "5", "x": 8.5, "y": 0}, {"label": "6", "x": 9.5, "y": 0}, {"label": "7", "x": 10.5, "y": 0}, {"label": "8", "x": 11.5, "y": 0}, {"label": "9", "x": 12.5, "y": 0}, {"label": "0", "x": 13.5, "y": 0}, {"label": "-", "x": 14.5, "y": 0}, {"label": "=", "x": 15.5, "y": 0}, {"label": "Backspace", "x": 16.5, "y": 0}, - {"label": "F2", "x": 0, "y": 1}, {"label": "F3", "x": 1, "y": 1}, {"label": "Tab", "x": 3.5, "y": 1}, {"label": "Q", "x": 5, "y": 1}, {"label": "W", "x": 6, "y": 1}, {"label": "E", "x": 7, "y": 1}, {"label": "R", "x": 8, "y": 1}, {"label": "T", "x": 9, "y": 1}, {"label": "Y", "x": 10, "y": 1}, {"label": "U", "x": 11, "y": 1}, {"label": "I", "x": 12, "y": 1}, {"label": "O", "x": 13, "y": 1}, {"label": "P", "x": 14, "y": 1}, {"label": "[", "x": 15, "y": 1}, {"label": "]", "x": 16, "y": 1}, {"label": "|", "x": 17, "y": 1}, - {"label": "F4", "x": 0, "y": 2}, {"label": "F5", "x": 1, "y": 2}, {"label": "Caps", "x": 3.5, "y": 2}, {"label": "A", "x": 5.25, "y": 2}, {"label": "S", "x": 6.25, "y": 2}, {"label": "D", "x": 7.25, "y": 2}, {"label": "F", "x": 8.25, "y": 2}, {"label": "G", "x": 9.25, "y": 2}, {"label": "H", "x": 10.25, "y": 2}, {"label": "J", "x": 11.25, "y": 2}, {"label": "K", "x": 12.25, "y": 2}, {"label": "L", "x": 13.25, "y": 2}, {"label": ";", "x": 14.25, "y": 2}, {"label": "'", "x": 15.25, "y": 2}, {"label": "Enter", "x": 16.25, "y": 2}, - {"label": "F6", "x": 0, "y": 3}, {"label": "F7", "x": 1, "y": 3}, {"label": "Shift", "x": 3.5, "y": 3}, {"label": "Z", "x": 5.5, "y": 3}, {"label": "X", "x": 6.5, "y": 3}, {"label": "C", "x": 7.5, "y": 3}, {"label": "V", "x": 8.5, "y": 3}, {"label": "B", "x": 9.5, "y": 3}, {"label": "N", "x": 10.5, "y": 3}, {"label": "M", "x": 11.5, "y": 3}, {"label": ",", "x": 12.5, "y": 3}, {"label": ".", "x": 13.5, "y": 3}, {"label": "/", "x": 14.5, "y": 3}, {"label": "Shift", "x": 15.5, "y": 3}, - {"label": "F1", "x": 0, "y": 4}, {"label": "F2", "x": 1, "y": 4}, {"label": "Ctrl", "x": 3.5, "y": 4}, {"label": "OS", "x": 4.75, "y": 4}, {"label": "Alt", "x": 6, "y": 4}, {"label": "Space", "x": 7.25, "y": 4}, {"label": "Alt", "x": 13.5, "y": 4}, {"label": "OS", "x": 14.75, "y": 4}, {"label": "Ctrl", "x": 16, "y": 4}, {"label": "Fn", "x": 17.25, "y": 4} - ] - } - } -} From 77877990ff2728af34508bf98e3f9121346292c6 Mon Sep 17 00:00:00 2001 From: Marc Nause Date: Wed, 27 Oct 2021 17:00:35 +0200 Subject: [PATCH 353/595] [Keymap] Add VLC keymap (#14956) Co-authored-by: Drashna Jaelre --- .../anavi/macropad8/keymaps/vlc/keymap.c | 138 ++++++++++++++++++ 1 file changed, 138 insertions(+) create mode 100644 keyboards/anavi/macropad8/keymaps/vlc/keymap.c diff --git a/keyboards/anavi/macropad8/keymaps/vlc/keymap.c b/keyboards/anavi/macropad8/keymaps/vlc/keymap.c new file mode 100644 index 0000000000..3e15a81861 --- /dev/null +++ b/keyboards/anavi/macropad8/keymaps/vlc/keymap.c @@ -0,0 +1,138 @@ + /* Copyright 2021 Marc Nause + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +enum custom_layers { + _PLAY, + _FRAME, + _DVD, + _FN +}; + +#define KC_X0 LT(_FN, KC_ESC) + +#ifdef RGBLIGHT_ENABLE +// How long (in ms) to wait between animation steps for the rainbow mode +const uint8_t RGBLED_RAINBOW_MOOD_INTERVALS[] PROGMEM = {60, 30, 15}; +// How long (in milliseconds) to wait between animation steps for each of the "Swirling rainbow" animations +const uint8_t RGBLED_RAINBOW_SWIRL_INTERVALS[] PROGMEM = {20, 10, 4}; +#endif + +/* + * The keymap contains 3 layers for vlc hotkeys and a 4th layer + * for controlling the backlighting and the underlighting. + * + * See https://wiki.videolan.org/QtHotkeys/ for VLC hotkeys + * + * - Layer for VLC media play hotkeys: + * Space - Play/pause + * P - Previous track + * S - Stop + * N - Next track + * + - Slower + * - - Faster + * = - Normal rate + * + * - Layer for VLC frame control hotkeys: + * Shift + right arrow - Jump 5 seconds forward + * Alt + right arrow - Jump 10 seconds forward + * Control + right arrow - Jump 1 minute forward + * E - Next frame + * Shift + left arrow - Jump 5 seconds back + * Alt + left arrow - Jump 10 seconds back + * Control + left arrow - Jump 1 minute back + * + * - Layer for VLC DVD hotkeys: + * Shift + M - Disc menu + * Arrow up - Navigate menu (up) + * Enter - Select menu entry + * Shift + V - Toggle subtitles + * Arrow left - Navigate menu (left) + * Arrow down - Navigate menu (down) + * Arrow right - Navigate menu (right) + */ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_PLAY] = LAYOUT_ortho_2x4( + KC_SPC, KC_P, KC_S, KC_N, + KC_KP_PLUS, KC_KP_MINUS, KC_KP_EQUAL, TO(_FRAME) + ), + + [_FRAME] = LAYOUT_ortho_2x4( + LSFT(KC_RIGHT), LALT(KC_RIGHT), LCTL(KC_RIGHT), KC_E, + LSFT(KC_LEFT), LALT(KC_LEFT), LCTL(KC_LEFT), TO(_DVD) + ), + + [_DVD] = LAYOUT_ortho_2x4( + LSFT(KC_M), KC_UP, KC_ENTER, LSFT(KC_V), + KC_LEFT, KC_DOWN, KC_RIGHT, TO(_FN) + ), + + [_FN] = LAYOUT_ortho_2x4( + RGB_TOG, RGB_MOD, RGB_M_R, RGB_M_SN, + BL_TOGG, BL_STEP, BL_BRTG, TO(_PLAY) + ) +}; + +#ifdef OLED_ENABLE +oled_rotation_t oled_init_user(oled_rotation_t rotation) { + return OLED_ROTATION_180; // flips the display 180 degrees if offhand +} + +void oled_task_user(void) { + // Host Keyboard Layer Status + oled_write_ln_P(PSTR("ANAVI Macro Pad 8"), false); + oled_write_P(PSTR("Layer: "), false); + + switch (get_highest_layer(layer_state)) { + case _PLAY: + oled_write_ln_P(PSTR("VLC Play"), false); + break; + case _FRAME: + oled_write_ln_P(PSTR("VLC Frame"), false); + break; + case _DVD: + oled_write_ln_P(PSTR("VLC DVD"), false); + break; + case _FN: + oled_write_ln_P(PSTR("FN "), false); + break; + default: + // Or use the write_ln shortcut over adding '\n' to the end of your string + oled_write_ln_P(PSTR("N/A"), false); + } + + // Host Keyboard LED Status + led_t led_state = host_keyboard_led_state(); + oled_write_P(PSTR("Num Lock: "), false); + oled_write_ln_P(led_state.num_lock ? PSTR("On") : PSTR("Off"), false); + oled_write_P(PSTR("Caps Lock: "), false); + oled_write_ln_P(led_state.caps_lock ? PSTR("On") : PSTR("Off"), false); + oled_write_P(PSTR("Scroll Lock: "), false); + oled_write_ln_P(led_state.scroll_lock ? PSTR("On") : PSTR("Off"), false); + oled_write_P(PSTR("Backlit: "), false); + oled_write_ln_P(is_backlight_enabled() ? PSTR("On") : PSTR("Off"), false); +#ifdef RGBLIGHT_ENABLE + static char rgbStatusLine1[26] = {0}; + snprintf(rgbStatusLine1, sizeof(rgbStatusLine1), "RGB Mode: %d", rgblight_get_mode()); + oled_write_ln(rgbStatusLine1, false); + static char rgbStatusLine2[26] = {0}; + snprintf(rgbStatusLine2, sizeof(rgbStatusLine2), "h:%d s:%d v:%d", rgblight_get_hue(), rgblight_get_sat(), rgblight_get_val()); + oled_write_ln(rgbStatusLine2, false); +#endif +} +#endif From db634c21a721e48966d028524a9129afd598ceff Mon Sep 17 00:00:00 2001 From: Jeremy Levy Date: Wed, 27 Oct 2021 08:01:54 -0700 Subject: [PATCH 354/595] [Keyboard] update(readme): with PCB reset instructions (#14961) --- keyboards/wuque/ikki68_aurora/readme.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/keyboards/wuque/ikki68_aurora/readme.md b/keyboards/wuque/ikki68_aurora/readme.md index 298d7e00ed..98674d0d72 100644 --- a/keyboards/wuque/ikki68_aurora/readme.md +++ b/keyboards/wuque/ikki68_aurora/readme.md @@ -19,7 +19,7 @@ Flashing example for this keyboard: To reset the board into bootloader mode, do one of the following: -* Tap the Reset switch mounted on the PCB +* Under the **space1** key short the pins on the PCB as shown [here]( https://media.discordapp.net/attachments/768892137205923850/862663262180999218/image0.jpg?width=2520&height=910) * In the case of the default keymap, use the key combination Fn + PageUp * Hold the Esc key while connecting the USB cable (also erases persistent settings) From 546e6a15dcad55e2b370dddf417d83ae88e87217 Mon Sep 17 00:00:00 2001 From: Albert Y <76888457+filterpaper@users.noreply.github.com> Date: Wed, 27 Oct 2021 23:02:21 +0800 Subject: [PATCH 355/595] [Keyboard] Cradio keyboard (#14946) Co-authored-by: Ryan Co-authored-by: filterpaper --- keyboards/cradio/config.h | 83 +++++++++++++++++++++++ keyboards/cradio/cradio.c | 20 ++++++ keyboards/cradio/cradio.h | 50 ++++++++++++++ keyboards/cradio/info.json | 52 ++++++++++++++ keyboards/cradio/keymaps/default/keymap.c | 51 ++++++++++++++ keyboards/cradio/readme.md | 33 +++++++++ keyboards/cradio/rules.mk | 23 +++++++ 7 files changed, 312 insertions(+) create mode 100644 keyboards/cradio/config.h create mode 100644 keyboards/cradio/cradio.c create mode 100644 keyboards/cradio/cradio.h create mode 100644 keyboards/cradio/info.json create mode 100644 keyboards/cradio/keymaps/default/keymap.c create mode 100644 keyboards/cradio/readme.md create mode 100644 keyboards/cradio/rules.mk diff --git a/keyboards/cradio/config.h b/keyboards/cradio/config.h new file mode 100644 index 0000000000..2d76de6a8e --- /dev/null +++ b/keyboards/cradio/config.h @@ -0,0 +1,83 @@ +/* Copyright 2018-2021 + * ENDO Katsuhiro + * David Philip Barr <@davidphilipbarr> + * Pierre Chevalier + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xC88B +#define PRODUCT_ID 0x3988 +#define DEVICE_VER 0x0001 +#define MANUFACTURER DPB +#define PRODUCT Cradio + +/* key matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 5 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * NO_DIODE = switches are directly connected to AVR pins + * +*/ +#define DIRECT_PINS { \ + { E6, F7, F6, F5, F4 }, \ + { B1, B3, B2, B6, D3 }, \ + { D1, D0, D4, C6, D7 }, \ + { B4, B5, NO_PIN, NO_PIN, NO_PIN } \ +} + +#define DIRECT_PINS_RIGHT { \ + { F4, F5, F6, F7, E6 }, \ + { D3, B6, B2, B3, B1 }, \ + { D7, C6, D4, D0, D1 }, \ + { B5, B4, NO_PIN, NO_PIN, NO_PIN } \ +} + +#define UNUSED_PINS + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* Serial settings */ +#define USE_SERIAL +/* serial.c configuration for split keyboard */ +#define SOFT_SERIAL_PIN D2 + +/* Split handedness */ +#define EE_HANDS + +/* Top left key on left half */ +#define BOOTMAGIC_LITE_ROW 0 +#define BOOTMAGIC_LITE_COLUMN 0 +/* Top right key on right half */ +#define BOOTMAGIC_LITE_ROW_RIGHT 4 +#define BOOTMAGIC_LITE_COLUMN_RIGHT 4 diff --git a/keyboards/cradio/cradio.c b/keyboards/cradio/cradio.c new file mode 100644 index 0000000000..6ef9381223 --- /dev/null +++ b/keyboards/cradio/cradio.c @@ -0,0 +1,20 @@ +/* Copyright 2018-2021 + * ENDO Katsuhiro + * David Philip Barr <@davidphilipbarr> + * Pierre Chevalier + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "cradio.h" diff --git a/keyboards/cradio/cradio.h b/keyboards/cradio/cradio.h new file mode 100644 index 0000000000..29e81ef9b8 --- /dev/null +++ b/keyboards/cradio/cradio.h @@ -0,0 +1,50 @@ +/* Copyright 2018-2021 + * ENDO Katsuhiro + * David Philip Barr <@davidphilipbarr> + * Pierre Chevalier + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "quantum.h" + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ + +// readability +#define ___ KC_NO + +#define LAYOUT( \ + L01, L02, L03, L04, L05, R01, R02, R03, R04, R05, \ + L06, L07, L08, L09, L10, R06, R07, R08, R09, R10, \ + L11, L12, L13, L14, L15, R11, R12, R13, R14, R15, \ + L16, L17, R16, R17 \ + ) \ + { \ + { L01, L02, L03, L04, L05 }, \ + { L06, L07, L08, L09, L10 }, \ + { L11, L12, L13, L14, L15 }, \ + { L16, L17, ___, ___, ___ }, \ + { R01, R02, R03, R04, R05 }, \ + { R06, R07, R08, R09, R10 }, \ + { R11, R12, R13, R14, R15 }, \ + { R16, R17, ___, ___, ___ } \ + } + diff --git a/keyboards/cradio/info.json b/keyboards/cradio/info.json new file mode 100644 index 0000000000..77b611f325 --- /dev/null +++ b/keyboards/cradio/info.json @@ -0,0 +1,52 @@ +{ + "keyboard_name": "Cradio", + "url": "https://github.com/davidphilipbarr/Sweep", + "maintainer": "@davidphilipbarr", + "layouts": { + "LAYOUT": { + "layout": [ + {"x": 0, "y": 0.93}, + {"x": 1, "y": 0.31}, + {"x": 2, "y": 0}, + {"x": 3, "y": 0.28}, + {"x": 4, "y": 0.42}, + + {"x": 7, "y": 0.42}, + {"x": 8, "y": 0.28}, + {"x": 9, "y": 0}, + {"x": 10, "y": 0.31}, + {"x": 11, "y": 0.93}, + + {"x": 0, "y": 1.93}, + {"x": 1, "y": 1.31}, + {"x": 2, "y": 1}, + {"x": 3, "y": 1.28}, + {"x": 4, "y": 1.42}, + + {"x": 7, "y": 1.42}, + {"x": 8, "y": 1.28}, + {"x": 9, "y": 1}, + {"x": 10, "y": 1.31}, + {"x": 11, "y": 1.93}, + + {"x": 0, "y": 2.93}, + {"x": 1, "y": 2.31}, + {"x": 2, "y": 2}, + {"x": 3, "y": 2.28}, + {"x": 4, "y": 2.42}, + + {"x": 7, "y": 2.42}, + {"x": 8, "y": 2.28}, + {"x": 9, "y": 2}, + {"x": 10, "y": 2.31}, + {"x": 11, "y": 2.93}, + + {"x": 3.5, "y": 3.75}, + {"x": 4.5, "y": 4}, + + {"x": 6.5, "y": 4}, + {"x": 7.5, "y": 3.75} + ] + } + } +} diff --git a/keyboards/cradio/keymaps/default/keymap.c b/keyboards/cradio/keymaps/default/keymap.c new file mode 100644 index 0000000000..bb7e2d35e6 --- /dev/null +++ b/keyboards/cradio/keymaps/default/keymap.c @@ -0,0 +1,51 @@ +/* Copyright 2018-2021 + * ENDO Katsuhiro + * David Philip Barr <@davidphilipbarr> + * Pierre Chevalier + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +/* Base layer 0 layout uses home row mods. See the following guide for details: + * https://precondition.github.io/home-row-mods + */ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, + SFT_T(KC_A),ALT_T(KC_S),CTL_T(KC_D),GUI_T(KC_F), KC_G, KC_H, GUI_T(KC_J),CTL_T(KC_K),ALT_T(KC_L),SFT_T(KC_SCLN), + KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, + LT(2,KC_TAB), KC_ENT, KC_SPC, LT(1,KC_BSPC) + ), + [1] = LAYOUT( + _______, KC_1, KC_2, KC_3, KC_VOLU, KC_HOME, KC_PGDN, KC_PGUP, KC_END, KC_DQUO, + _______, KC_4, KC_5, KC_6, KC_VOLD, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_QUOT, + KC_CAPS, KC_7, KC_8, KC_9, KC_0, _______, _______, _______, _______, _______, + MO(3), KC_GESC, _______, _______ + ), + [2] = LAYOUT( + _______, KC_LBRC, KC_LCBR, KC_RCBR, _______, KC_CIRC, KC_LPRN, KC_RPRN, KC_RBRC, KC_TILD, + KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_AMPR, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, + _______, _______, _______, _______, _______, KC_ASTR, KC_UNDS, KC_PLUS, KC_PIPE, _______, + _______, _______, KC_DEL, MO(3) + ), + [3] = LAYOUT( + _______, KC_F1, KC_F2, KC_F3, KC_F10, _______, KC_WH_U, KC_WH_D, _______, RESET, + _______, KC_F4, KC_F5, KC_F6, KC_F11, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, KC_INS, + _______, KC_F7, KC_F8, KC_F9, KC_F12, _______, KC_BTN1, KC_BTN2, _______, _______, + _______, _______, _______, _______ + ) +}; diff --git a/keyboards/cradio/readme.md b/keyboards/cradio/readme.md new file mode 100644 index 0000000000..b8520a366b --- /dev/null +++ b/keyboards/cradio/readme.md @@ -0,0 +1,33 @@ +# Cradio keyboards + +![Cradio](https://github.com/davidphilipbarr/hypergolic/raw/main/hypergarlic/ht.png) + +Cradio are low-profile 34-key split-keyboards designed by [@davidphilipbarr](https://github.com/davidphilipbarr), with no diodes and direct micro-controller pin wiring. + +## Keyboard Info + +* Keyboard Maintainer: [davidphilipbarr](https://github.com/davidphilipbarr) +* Hardware Supported: + * [Sweep](https://github.com/davidphilipbarr/Sweep) + * [Hypergarlic](https://github.com/davidphilipbarr/hypergolic/tree/main/hypergarlic) + * Variants of the same 34-key direct pin PCB +* Hardware Availability: PCBs can be printed with gerber files from the repository + +Make examples for this keyboard (after setting up your build environment): + + make cradio:default + +Firmware uses `EE_HANDS` split handedness by default. Each halve should be flashed once with the following: + + make cradio:default:dfu-split-left + make cradio:default:dfu-split-right + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the top left key on the left half (or the top right right key on the right half) and plug in the controller on that side. +* **Physical reset button**: Briefly press the reset button soldered on the PCB. +* **Keycode in layout**: Press the key mapped to `RESET` if it is configured. diff --git a/keyboards/cradio/rules.mk b/keyboards/cradio/rules.mk new file mode 100644 index 0000000000..437ca573d7 --- /dev/null +++ b/keyboards/cradio/rules.mk @@ -0,0 +1,23 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +UNICODE_ENABLE = yes # Unicode +AUDIO_ENABLE = no # Audio output +SPLIT_KEYBOARD = yes # Use shared split_common code From 9b912416b4334a55d49e84f38d73625f9fa728b1 Mon Sep 17 00:00:00 2001 From: Albert Y <76888457+filterpaper@users.noreply.github.com> Date: Wed, 27 Oct 2021 23:03:00 +0800 Subject: [PATCH 356/595] [Docs] Add instructions to create keymap before proceeding (#14945) Co-authored-by: filterpaper --- docs/newbs_getting_started.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/newbs_getting_started.md b/docs/newbs_getting_started.md index b434a04bbe..5dbaa56169 100644 --- a/docs/newbs_getting_started.md +++ b/docs/newbs_getting_started.md @@ -194,7 +194,7 @@ You can also set your default keymap name. Most people use their GitHub username qmk config user.keymap= -After this you can leave those arguments off and compile your keyboard like this: +The keyboard can now be compiled without arguments using the following command after creating your keymap in the next section: qmk compile From 2e3514f21c718e0f99e12433a96d6916f1a2fb73 Mon Sep 17 00:00:00 2001 From: TW59420 <40019210+TW59420@users.noreply.github.com> Date: Wed, 27 Oct 2021 23:03:51 +0800 Subject: [PATCH 357/595] [Keyboard] Add MW65 Series PCB (#14939) --- keyboards/mwstudio/mw65_rgb/config.h | 61 +++++++++ keyboards/mwstudio/mw65_rgb/info.json | 84 ++++++++++++ .../mw65_rgb/keymaps/default/keymap.c | 51 +++++++ .../mwstudio/mw65_rgb/keymaps/via/keymap.c | 128 ++++++++++++++++++ .../mwstudio/mw65_rgb/keymaps/via/rules.mk | 2 + keyboards/mwstudio/mw65_rgb/mw65_rgb.c | 45 ++++++ keyboards/mwstudio/mw65_rgb/mw65_rgb.h | 33 +++++ keyboards/mwstudio/mw65_rgb/readme.md | 22 +++ keyboards/mwstudio/mw65_rgb/rules.mk | 24 ++++ keyboards/mwstudio/readme.md | 2 + 10 files changed, 452 insertions(+) create mode 100644 keyboards/mwstudio/mw65_rgb/config.h create mode 100644 keyboards/mwstudio/mw65_rgb/info.json create mode 100644 keyboards/mwstudio/mw65_rgb/keymaps/default/keymap.c create mode 100644 keyboards/mwstudio/mw65_rgb/keymaps/via/keymap.c create mode 100644 keyboards/mwstudio/mw65_rgb/keymaps/via/rules.mk create mode 100644 keyboards/mwstudio/mw65_rgb/mw65_rgb.c create mode 100644 keyboards/mwstudio/mw65_rgb/mw65_rgb.h create mode 100644 keyboards/mwstudio/mw65_rgb/readme.md create mode 100644 keyboards/mwstudio/mw65_rgb/rules.mk diff --git a/keyboards/mwstudio/mw65_rgb/config.h b/keyboards/mwstudio/mw65_rgb/config.h new file mode 100644 index 0000000000..8a320664a9 --- /dev/null +++ b/keyboards/mwstudio/mw65_rgb/config.h @@ -0,0 +1,61 @@ +/* Copyright 2021 TW59420 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x7BA1 +#define PRODUCT_ID 0x6502 +#define DEVICE_VER 0x0001 +#define MANUFACTURER MWStudio +#define PRODUCT MW65 + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 15 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { D0, D1, D2, D3, B7, B0 } +#define MATRIX_COL_PINS { C6, B6, B5, B4, D7, D6, D4, C7, F7, F6, F5, F4, F1, F0, E6 } + +#define BOOTMAGIC_LITE_ROW 0 +#define BOOTMAGIC_LITE_COLUMN 0 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +#define RGB_DI_PIN B3 +#ifdef RGB_DI_PIN + #define RGBLIGHT_SLEEP + + #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 + #define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS + #define DRIVER_LED_TOTAL 83 + #define RGBLED_NUM 83 + #define RGB_MATRIX_KEYPRESSES + + #define RGBLIGHT_HUE_STEP 8 + #define RGBLIGHT_SAT_STEP 8 + #define RGBLIGHT_VAL_STEP 8 +#endif + +#define ENCODERS_PAD_A { B1 } +#define ENCODERS_PAD_B { B2 } diff --git a/keyboards/mwstudio/mw65_rgb/info.json b/keyboards/mwstudio/mw65_rgb/info.json new file mode 100644 index 0000000000..affcdadbc0 --- /dev/null +++ b/keyboards/mwstudio/mw65_rgb/info.json @@ -0,0 +1,84 @@ +{ + "keyboard_name": "MW65_RGB", + "url": "", + "maintainer": "qmk", + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"ESC", "x":0, "y":0}, + {"label":"1", "x":1, "y":0}, + {"label":"2", "x":2, "y":0}, + {"label":"3", "x":3, "y":0}, + {"label":"4", "x":4, "y":0}, + {"label":"5", "x":5, "y":0}, + {"label":"6", "x":6, "y":0}, + {"label":"7", "x":7, "y":0}, + {"label":"8", "x":8, "y":0}, + {"label":"9", "x":9, "y":0}, + {"label":"0", "x":10, "y":0}, + {"label":"-", "x":11, "y":0}, + {"label":"=", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0, "w":2}, + {"label":"Delete", "x":15, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[", "x":11.5, "y":1}, + {"label":"]", "x":12.5, "y":1}, + {"label":"\\", "x":13.5, "y":1, "w":1.5}, + {"label":"PgUp", "x":15, "y":1}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";", "x":10.75, "y":2}, + {"label":"'", "x":11.75, "y":2}, + {"label":"Enter", "x":12.75, "y":2, "w":2.25}, + {"label":"PgDn", "x":15, "y":2}, + + {"label":"Shift", "x":0, "y":3, "w":2.25}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",", "x":9.25, "y":3}, + {"label":".", "x":10.25, "y":3}, + {"label":"/", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"\u2191", "x":14, "y":3}, + {"label":"End", "x":15, "y":3}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"Win", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"label":"Vol-", "x":3.75, "y":4 }, + {"label":"Vol+", "x":4.75, "y":4 }, + {"x":5.75, "y":4, "w":4.25}, + {"label":"Alt", "x":10, "y":4, "w":1.25}, + {"label":"Fn", "x":11.25, "y":4, "w":1.25}, + {"label":"\u2190", "x":13, "y":4}, + {"label":"\u2193", "x":14, "y":4}, + {"label":"\u2192", "x":15, "y":4} + ] + } + } +} diff --git a/keyboards/mwstudio/mw65_rgb/keymaps/default/keymap.c b/keyboards/mwstudio/mw65_rgb/keymaps/default/keymap.c new file mode 100644 index 0000000000..9466b0f283 --- /dev/null +++ b/keyboards/mwstudio/mw65_rgb/keymaps/default/keymap.c @@ -0,0 +1,51 @@ +/* Copyright 2021 TW59420 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, RGB_TOG, + KC_LCTL, KC_LGUI, KC_LALT, KC_VOLU, KC_VOLD, KC_SPACE, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT + ), + + [1] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, RGB_HUI, + RGB_TOG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_HUD, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_SAI, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAI, RGB_SAD, + _______, _______, _______, _______, _______, _______, RGB_MOD, _______, RGB_SPD, RGB_VAD, RGB_SPI + ), + + [2] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [3] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; diff --git a/keyboards/mwstudio/mw65_rgb/keymaps/via/keymap.c b/keyboards/mwstudio/mw65_rgb/keymaps/via/keymap.c new file mode 100644 index 0000000000..6506433998 --- /dev/null +++ b/keyboards/mwstudio/mw65_rgb/keymaps/via/keymap.c @@ -0,0 +1,128 @@ +/* Copyright 2021 TW59420 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +typedef union { + uint32_t raw; + struct { + bool top_rgb_change :1; + bool bottom_rgb_change :1; + }; +} user_config_t; + +user_config_t user_config; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, RGB_TOG, + KC_LCTL, KC_LGUI, KC_LALT, KC_VOLU, KC_VOLD, KC_SPACE, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT + ), + + [1] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, RGB_HUI, + RGB_TOG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_HUD, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, USER00, RGB_SAI, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, USER01, RGB_VAI, RGB_SAD, + _______, _______, _______, _______, _______, _______, RGB_MOD, _______, RGB_SPD, RGB_VAD, RGB_SPI + ), + + [2] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [3] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; + +void keyboard_post_init_user(void) { + // Read the user config from EEPROM + user_config.raw = eeconfig_read_user(); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case USER00: + if (record->event.pressed) { + // Do something when pressed + user_config.top_rgb_change ^= 1; // Toggles the status + eeconfig_update_user(user_config.raw); // Writes the new status to EEPROM + } else { + // Do something else when release + } + return false; // Skip all further processing of this key + case USER01: + if (record->event.pressed) { + // Do something when pressed + user_config.bottom_rgb_change ^= 1; // Toggles the status + eeconfig_update_user(user_config.raw); // Writes the new status to EEPROM + } else { + // Do something else when release + } + return false; // Skip all further processing of this key + default: + return true; // Process all other keycodes normally + } +} + +#ifdef ENCODER_ENABLE +bool encoder_update_user(uint8_t index, bool clockwise) { + if (index == 0) { + if (clockwise) { + tap_code(dynamic_keymap_get_keycode(biton32(layer_state), 4, 3)); + } else { + tap_code(dynamic_keymap_get_keycode(biton32(layer_state), 4, 4)); + } + } + return true; +} +#endif + +void rgb_matrix_indicators_advanced_user(uint8_t led_min, uint8_t led_max) { + + if (user_config.top_rgb_change) + { + for (size_t i = 16; i < 83; i++) + { + RGB_MATRIX_INDICATOR_SET_COLOR(i, 0, 0, 0); + } + } + + if (host_keyboard_led_state().caps_lock) { + RGB_MATRIX_INDICATOR_SET_COLOR(52, 0, 255, 255); // assuming caps lock is at led #5 + } + + if (user_config.bottom_rgb_change) + { + for (size_t i = 0; i < 16; i++) + { + RGB_MATRIX_INDICATOR_SET_COLOR(i, 0, 0, 0); + } + } +} diff --git a/keyboards/mwstudio/mw65_rgb/keymaps/via/rules.mk b/keyboards/mwstudio/mw65_rgb/keymaps/via/rules.mk new file mode 100644 index 0000000000..36b7ba9cbc --- /dev/null +++ b/keyboards/mwstudio/mw65_rgb/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/mwstudio/mw65_rgb/mw65_rgb.c b/keyboards/mwstudio/mw65_rgb/mw65_rgb.c new file mode 100644 index 0000000000..e49944f1ce --- /dev/null +++ b/keyboards/mwstudio/mw65_rgb/mw65_rgb.c @@ -0,0 +1,45 @@ +/* Copyright 2021 TW59420 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "mw65_rgb.h" + +#ifdef RGB_MATRIX_ENABLE +led_config_t g_led_config = { { + { 82, 81, 80, 79, 78, 77, 76, 75, 74, 73, 72, 71, 70, 69, 68 }, + { 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67 }, + { 52, 51, 50, 49, 48, 47, 46, 45, 44, 43, 42, 41, NO_LED, 40, 39 }, + { 25, NO_LED, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38 }, + { 24, 23, 22, NO_LED, NO_LED, NO_LED, 21, NO_LED, NO_LED, 15, 20, 19, 18, 17, 16 }, + + { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 } +}, { + { 175, 45 },{ 130, 45 },{ 85, 45 }, { 50, 45 }, { 15, 45 }, { 15, 35 }, { 15, 25 }, { 15, 10 }, + { 50, 10 }, { 85, 10 }, { 130, 10 }, { 175, 10 }, { 210, 10 }, { 210, 25 }, { 210, 35 }, { 210, 45 }, + { 217, 54 }, { 203, 54 }, { 189, 54 }, { 166, 54 }, { 150, 54 }, { 95, 54 }, { 40, 54 }, { 24, 54 }, { 8, 54 }, + { 17, 42 }, { 39, 42 }, { 53, 42 }, { 67, 42 }, { 81, 42 }, { 95, 42 }, { 109, 42 }, { 123, 42 }, { 137, 42 }, { 151, 42 }, { 165, 42 }, { 184, 42 }, { 203, 42 }, { 217, 42 }, + { 217, 30 }, { 195, 30 }, { 172, 30 }, { 158, 30 }, { 144, 30 }, { 130, 30 }, { 116, 30 }, { 102, 30 }, { 88, 30 }, { 74, 30 }, { 60, 30 }, { 46, 30 }, { 32, 30 },{ 13, 30 }, + { 9, 18 }, { 25, 18 }, { 39, 18 }, { 53, 18 }, { 67, 18 }, { 81, 18 }, { 95, 18 }, { 109, 18 }, { 123, 18 }, { 137, 18 }, { 151, 18 }, { 165, 18 }, { 181, 18 }, { 199, 18 }, { 217, 18 }, + { 217, 6 }, { 196, 6 }, { 175, 6 }, { 161, 6 }, { 147, 6 }, { 133, 6 }, { 119, 6 }, { 105, 6 }, { 91, 6 }, { 77, 6 }, { 63, 6 }, { 49, 6 }, { 35, 6 }, { 21, 6 }, { 7, 6 }, +}, { + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1 +} }; +#endif + diff --git a/keyboards/mwstudio/mw65_rgb/mw65_rgb.h b/keyboards/mwstudio/mw65_rgb/mw65_rgb.h new file mode 100644 index 0000000000..b491e324e2 --- /dev/null +++ b/keyboards/mwstudio/mw65_rgb/mw65_rgb.h @@ -0,0 +1,33 @@ +/* Copyright 2021 TW59420 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" + +#define LAYOUT( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K213, K214, \ + K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, \ + K400, K401, K402, K403, K404, K406, K410, K411, K412, K413, K414 \ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, KC_NO, K213, K214 }, \ + { K300, KC_NO, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314 }, \ + { K400, K401, K402, K403, K404, KC_NO, K406, KC_NO, KC_NO, KC_NO, K410, K411, K412, K413, K414 }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO } \ +} diff --git a/keyboards/mwstudio/mw65_rgb/readme.md b/keyboards/mwstudio/mw65_rgb/readme.md new file mode 100644 index 0000000000..e15b5f9de9 --- /dev/null +++ b/keyboards/mwstudio/mw65_rgb/readme.md @@ -0,0 +1,22 @@ +# MW65_RGB + +![MW65_RGB](https://i.imgur.com/MPb8Lba.jpg?2) + +Support Atmega32u4 keyboard. + +* Keyboard Maintainer: [TW59420](https://github.com/TW59420) +* Hardware Supported: Atmega32u4 + +Make example for this keyboard (after setting up your build environment): + + make mwstudio/mw65_rgb:default + +Flashing example for this keyboard: + + make mwstudio/mw65_rgb:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader +* **Physical reset button**: Short press the button on the back of the PCB to enter the Bootloader and flash the firmware +* **Keycode in layout**: Press the key mapped to RESET if it is available diff --git a/keyboards/mwstudio/mw65_rgb/rules.mk b/keyboards/mwstudio/mw65_rgb/rules.mk new file mode 100644 index 0000000000..58d8da3e89 --- /dev/null +++ b/keyboards/mwstudio/mw65_rgb/rules.mk @@ -0,0 +1,24 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +RGB_MATRIX_ENABLE = yes +RGB_MATRIX_DRIVER = WS2812 +ENCODER_ENABLE = yes diff --git a/keyboards/mwstudio/readme.md b/keyboards/mwstudio/readme.md index d4433a8c96..1962a97d82 100644 --- a/keyboards/mwstudio/readme.md +++ b/keyboards/mwstudio/readme.md @@ -2,4 +2,6 @@ This is a series of PCB * MW75 The chip is ATmega32U4 +* MW65_RGB The chip is ATmega32U4 + From 59738955293c85abcc5d9bd6998e3ed90ced4733 Mon Sep 17 00:00:00 2001 From: binepad <69730862+binepad@users.noreply.github.com> Date: Wed, 27 Oct 2021 20:37:58 +0530 Subject: [PATCH 358/595] [Keyboard] binepad bn009 (#14881) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- keyboards/binepad/bn009/bn009.c | 16 ++++ keyboards/binepad/bn009/bn009.h | 28 +++++++ keyboards/binepad/bn009/config.h | 78 +++++++++++++++++++ keyboards/binepad/bn009/info.json | 10 +++ .../binepad/bn009/keymaps/default/keymap.c | 42 ++++++++++ .../binepad/bn009/keymaps/default/readme.md | 1 + keyboards/binepad/bn009/keymaps/via/keymap.c | 44 +++++++++++ keyboards/binepad/bn009/keymaps/via/rules.mk | 1 + keyboards/binepad/bn009/readme.md | 17 ++++ keyboards/binepad/bn009/rules.mk | 21 +++++ 10 files changed, 258 insertions(+) create mode 100644 keyboards/binepad/bn009/bn009.c create mode 100644 keyboards/binepad/bn009/bn009.h create mode 100644 keyboards/binepad/bn009/config.h create mode 100644 keyboards/binepad/bn009/info.json create mode 100644 keyboards/binepad/bn009/keymaps/default/keymap.c create mode 100644 keyboards/binepad/bn009/keymaps/default/readme.md create mode 100644 keyboards/binepad/bn009/keymaps/via/keymap.c create mode 100644 keyboards/binepad/bn009/keymaps/via/rules.mk create mode 100644 keyboards/binepad/bn009/readme.md create mode 100644 keyboards/binepad/bn009/rules.mk diff --git a/keyboards/binepad/bn009/bn009.c b/keyboards/binepad/bn009/bn009.c new file mode 100644 index 0000000000..48bfb44dae --- /dev/null +++ b/keyboards/binepad/bn009/bn009.c @@ -0,0 +1,16 @@ +/* Copyright 2020 BINEPAD + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "bn009.h" diff --git a/keyboards/binepad/bn009/bn009.h b/keyboards/binepad/bn009/bn009.h new file mode 100644 index 0000000000..9a3a23fbcb --- /dev/null +++ b/keyboards/binepad/bn009/bn009.h @@ -0,0 +1,28 @@ +/* Copyright 2020 BINEPAD + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "quantum.h" + +#define LAYOUT( \ + k00, k01, k02, \ + k10, k11, k12, \ + k20, k21, k22 \ +) \ +{ \ + { k00, k01, k02 }, \ + { k10, k11, k12 }, \ + { k20, k21, k22 } \ +} + diff --git a/keyboards/binepad/bn009/config.h b/keyboards/binepad/bn009/config.h new file mode 100644 index 0000000000..0b12f54c75 --- /dev/null +++ b/keyboards/binepad/bn009/config.h @@ -0,0 +1,78 @@ +/* Copyright 2020 BINEPAD + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4249 // Binepad +#define PRODUCT_ID 0x4295 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Binepad +#define PRODUCT BN009 + +/* Key matrix size */ +#define MATRIX_ROWS 3 +#define MATRIX_COLS 3 + +#define MATRIX_ROW_PINS { D2, D1, D0 } +#define MATRIX_COL_PINS { B6, B5, B4 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + + */ +//#define FORCE_NKRO + diff --git a/keyboards/binepad/bn009/info.json b/keyboards/binepad/bn009/info.json new file mode 100644 index 0000000000..2d439c8257 --- /dev/null +++ b/keyboards/binepad/bn009/info.json @@ -0,0 +1,10 @@ +{ + "keyboard_name": "BN009", + "url": "https://binepad.com", + "maintainer": "binepad", + "layouts": { + "LAYOUT": { + "layout": [{"label":"k00", "x":0, "y":0}, {"label":"k01", "x":1, "y":0}, {"label":"k02", "x":2, "y":0}, {"label":"k10", "x":0, "y":1}, {"label":"k11", "x":1, "y":1}, {"label":"k12", "x":2, "y":1}, {"label":"k20", "x":0, "y":2}, {"label":"k21", "x":1, "y":2}, {"label":"k22", "x":2, "y":2}] + } + } +} \ No newline at end of file diff --git a/keyboards/binepad/bn009/keymaps/default/keymap.c b/keyboards/binepad/bn009/keymaps/default/keymap.c new file mode 100644 index 0000000000..573a25d01d --- /dev/null +++ b/keyboards/binepad/bn009/keymaps/default/keymap.c @@ -0,0 +1,42 @@ +/* Copyright 2021 BINEPAD + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + +[0] = LAYOUT( + KC_7, KC_8, KC_9, + KC_4, KC_5, KC_6, + KC_1, KC_2, KC_3 +), + + +[1] = LAYOUT( + KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO +), + + +[2] = LAYOUT( + KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_NO +) + +}; diff --git a/keyboards/binepad/bn009/keymaps/default/readme.md b/keyboards/binepad/bn009/keymaps/default/readme.md new file mode 100644 index 0000000000..b3c7ba28dc --- /dev/null +++ b/keyboards/binepad/bn009/keymaps/default/readme.md @@ -0,0 +1 @@ +# bn009 - Default layout diff --git a/keyboards/binepad/bn009/keymaps/via/keymap.c b/keyboards/binepad/bn009/keymaps/via/keymap.c new file mode 100644 index 0000000000..4ce3d1ae78 --- /dev/null +++ b/keyboards/binepad/bn009/keymaps/via/keymap.c @@ -0,0 +1,44 @@ +/* Copyright 2021 BINEPAD + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = + LAYOUT( + KC_7 , KC_8 , KC_9, + KC_4 , KC_5 , KC_6, + KC_1 , KC_2 , KC_3 + ), + [1] = + LAYOUT( + KC_NO , KC_NO, KC_NO, + KC_NO , KC_NO, KC_NO, + KC_NO , KC_NO, KC_NO + ), + [2] = + LAYOUT( + KC_NO , KC_NO, KC_NO, + KC_NO , KC_NO, KC_NO, + KC_NO , KC_NO, KC_NO + ), + [3] = + LAYOUT( + KC_NO , KC_NO, KC_NO, + KC_NO , KC_NO, KC_NO, + KC_NO , KC_NO, KC_NO + ), +}; diff --git a/keyboards/binepad/bn009/keymaps/via/rules.mk b/keyboards/binepad/bn009/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/binepad/bn009/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/binepad/bn009/readme.md b/keyboards/binepad/bn009/readme.md new file mode 100644 index 0000000000..dc0442fa82 --- /dev/null +++ b/keyboards/binepad/bn009/readme.md @@ -0,0 +1,17 @@ +# BINEPAD BN009 + +![BINEPAD BN009](https://imgur.com/fu0iXD0h.jpg) + +A 9% macropad. + +* Keyboard Maintainer: [BINEPAD] +* Hardware Supported: BN009 PCB (ATmega32U4) +* Hardware Availability: [Interest Check](https://www.binepad.com/bn009) + +**Physical reset button**: There's a small hole at the bottom of macropad. Use the reset pin provided in box and push it hard through the hole, so that it press the reset button on pcb. + +Make example for this keyboard (after setting up your build environment): + + make binepad/bn009:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/binepad/bn009/rules.mk b/keyboards/binepad/bn009/rules.mk new file mode 100644 index 0000000000..10e9616d6f --- /dev/null +++ b/keyboards/binepad/bn009/rules.mk @@ -0,0 +1,21 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output From e4ae4c8b1ceef6617aa3928901c78eaa1e8fd5b5 Mon Sep 17 00:00:00 2001 From: pttbx <57902726+pttbx@users.noreply.github.com> Date: Wed, 27 Oct 2021 23:09:19 +0800 Subject: [PATCH 359/595] [Keymap] Add personal lily58 keymap (#14834) Co-authored-by: Ryan Co-authored-by: polplop Co-authored-by: paultan <47445257+polplop@users.noreply.github.com> --- keyboards/lily58/keymaps/pttbx/config.h | 46 +++++++ keyboards/lily58/keymaps/pttbx/keymap.c | 164 ++++++++++++++++++++++++ keyboards/lily58/keymaps/pttbx/rules.mk | 5 + 3 files changed, 215 insertions(+) create mode 100644 keyboards/lily58/keymaps/pttbx/config.h create mode 100644 keyboards/lily58/keymaps/pttbx/keymap.c create mode 100644 keyboards/lily58/keymaps/pttbx/rules.mk diff --git a/keyboards/lily58/keymaps/pttbx/config.h b/keyboards/lily58/keymaps/pttbx/config.h new file mode 100644 index 0000000000..d843f5b1c4 --- /dev/null +++ b/keyboards/lily58/keymaps/pttbx/config.h @@ -0,0 +1,46 @@ +/* +This is the c configuration file for the keymap + +Copyright 2012 Jun Wako +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +/* Select hand configuration */ + +#define MASTER_LEFT +// #define MASTER_RIGHT +// #define EE_HANDS + +#define TAPPING_FORCE_HOLD +#define TAPPING_TERM 100 + +#undef RGBLED_NUM +#define RGBLIGHT_ANIMATIONS +#define RGBLED_NUM 27 +#define RGBLIGHT_LIMIT_VAL 120 +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 + +// Underglow +/* +#undef RGBLED_NUM +#define RGBLED_NUM 14 // Number of LEDs +#define RGBLIGHT_ANIMATIONS +#define RGBLIGHT_SLEEP +*/ diff --git a/keyboards/lily58/keymaps/pttbx/keymap.c b/keyboards/lily58/keymaps/pttbx/keymap.c new file mode 100644 index 0000000000..944794141a --- /dev/null +++ b/keyboards/lily58/keymaps/pttbx/keymap.c @@ -0,0 +1,164 @@ +/* Copyright 2021 Paul Tan + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +enum layer_number { + _QWERTY = 0, + _LOWER, + _RAISE, + _ADJUST, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* QWERTY + * ,-----------------------------------------. ,-----------------------------------------. + * | ESC | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | ` | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Tab | Q | W | E | R | T | | Y | U | I | O | P | - | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * |LCTRL | A | S | D | F | G |-------. ,-------| H | J | K | L | ; | ' | + * |------+------+------+------+------+------| [ | | ] |------+------+------+------+------+------| + * |LShift| Z | X | C | V | B |-------| |-------| N | M | , | . | / |RShift| + * `-----------------------------------------/ / \ \-----------------------------------------' + * | LOWER| LGUI |LAlt | /Space / \Enter \ |BackSP| RGUI |RAISE | + * | | | |/ / \ \ | | | | + * `----------------------------' '------''--------------------' + */ + + [_QWERTY] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_GRV, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_MINS, + KC_LCTRL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LBRC, KC_RBRC, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + MO(_LOWER), KC_LGUI, KC_LALT, KC_SPC, KC_ENT, KC_BSPC, KC_RGUI, MO(_RAISE) +), +/* LOWER + * ,-----------------------------------------. ,-----------------------------------------. + * | | | | | | | | | | | | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | F1 | F2 | F3 | F4 | F5 | F6 | | F7 | F8 | F9 | F10 | F11 | F12 | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | ` | ! | @ | # | $ | % |-------. ,-------| ^ | & | * | ( | ) | - | + * |------+------+------+------+------+------| [ | | ] |------+------+------+------+------+------| + * | | | | | | |-------| |-------| | _ | + | { | } | | | + * `-----------------------------------------/ / \ \-----------------------------------------' + * | LAlt | LGUI |LOWER | /Space / \Enter \ |RAISE |BackSP| RGUI | + * | | | |/ / \ \ | | | | + * `----------------------------' '------''--------------------' + */ +[_LOWER] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______,_______, _______, _______, + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + KC_GRV, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_TILD, + _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, + _______, _______, _______, _______, _______, _______, _______, _______ +), +/* RAISE + * ,-----------------------------------------. ,-----------------------------------------. + * | | | | | | | | | | | | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | F1 | F2 | F3 | F4 | F5 | F6 |-------. ,-------| | Left | Down | Up |Right | | + * |------+------+------+------+------+------| [ | | ] |------+------+------+------+------+------| + * | F7 | F8 | F9 | F10 | F11 | F12 |-------| |-------| + | - | = | [ | ] | \ | + * `-----------------------------------------/ / \ \-----------------------------------------' + * | LAlt | LGUI |LOWER | /Space / \Enter \ |RAISE |BackSP| RGUI | + * | | | |/ / \ \ | | | | + * `----------------------------' '------''--------------------' + */ + +[_RAISE] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, XXXXXXX, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, XXXXXXX, + KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, KC_PLUS, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, + _______, _______, _______, _______, _______, _______, _______, _______ +), +/* ADJUST + * ,-----------------------------------------. ,-----------------------------------------. + * | | | | | | | | | | | | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | | | | | | | | | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | | | | |-------. ,-------| | |RGB ON| HUE+ | SAT+ | VAL+ | + * |------+------+------+------+------+------| | | |------+------+------+------+------+------| + * | | | | | | |-------| |-------| | | MODE | HUE- | SAT- | VAL- | + * `-----------------------------------------/ / \ \-----------------------------------------' + * | LAlt | LGUI |LOWER | /Space / \Enter \ |RAISE |BackSP| RGUI | + * | | | |/ / \ \ | | | | + * `----------------------------' '------''--------------------' + */ + [_ADJUST] = LAYOUT( + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; + +layer_state_t layer_state_set_user(layer_state_t state) { + return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST); +} + +//SSD1306 OLED update loop, make sure to enable OLED_ENABLE=yes in rules.mk +#ifdef OLED_ENABLE + +oled_rotation_t oled_init_user(oled_rotation_t rotation) { + if (!is_keyboard_master()) + return OLED_ROTATION_180; // flips the display 180 degrees if offhand + return rotation; +} + +// When you add source files to SRC in rules.mk, you can use functions. +const char *read_layer_state(void); +const char *read_logo(void); +void set_keylog(uint16_t keycode, keyrecord_t *record); +const char *read_keylog(void); +const char *read_keylogs(void); + +// const char *read_mode_icon(bool swap); +// const char *read_host_led_state(void); +// void set_timelog(void); +// const char *read_timelog(void); + +void oled_task_user(void) { + if (is_keyboard_master()) { + // If you want to change the display of OLED, you need to change here + oled_write_ln(read_layer_state(), false); + oled_write_ln(read_keylog(), false); + oled_write_ln(read_keylogs(), false); + //oled_write_ln(read_mode_icon(keymap_config.swap_lalt_lgui), false); + //oled_write_ln(read_host_led_state(), false); + //oled_write_ln(read_timelog(), false); + } else { + oled_write(read_logo(), false); + } +} +#endif // OLED_ENABLE + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + if (record->event.pressed) { +#ifdef OLED_ENABLE + set_keylog(keycode, record); +#endif + // set_timelog(); + } + return true; +} diff --git a/keyboards/lily58/keymaps/pttbx/rules.mk b/keyboards/lily58/keymaps/pttbx/rules.mk new file mode 100644 index 0000000000..e2c8a6f746 --- /dev/null +++ b/keyboards/lily58/keymaps/pttbx/rules.mk @@ -0,0 +1,5 @@ +# If you want to change the display of OLED, you need to change here +SRC += ./lib/rgb_state_reader.c \ + ./lib/layer_state_reader.c \ + ./lib/logo_reader.c \ + ./lib/keylogger.c From 128b4eb005c2d8dcedb715e0168bde3beb591bac Mon Sep 17 00:00:00 2001 From: peepeetee <43021794+peepeetee@users.noreply.github.com> Date: Wed, 27 Oct 2021 23:09:52 +0800 Subject: [PATCH 360/595] [Keyboard] Add support for bm65rgb, a revival of #13361 (#14800) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan Co-authored-by: bytesapart --- .../bm65rgb/keymaps/default/keymap.c | 34 +++++ .../bm65rgb/keymaps/default/readme.md | 1 + keyboards/kprepublic/bm65rgb/readme.md | 24 ++++ keyboards/kprepublic/bm65rgb/rev1/config.h | 122 ++++++++++++++++++ keyboards/kprepublic/bm65rgb/rev1/info.json | 78 +++++++++++ keyboards/kprepublic/bm65rgb/rev1/readme.md | 24 ++++ keyboards/kprepublic/bm65rgb/rev1/rev1.c | 44 +++++++ keyboards/kprepublic/bm65rgb/rev1/rev1.h | 41 ++++++ keyboards/kprepublic/bm65rgb/rev1/rules.mk | 26 ++++ 9 files changed, 394 insertions(+) create mode 100644 keyboards/kprepublic/bm65rgb/keymaps/default/keymap.c create mode 100644 keyboards/kprepublic/bm65rgb/keymaps/default/readme.md create mode 100644 keyboards/kprepublic/bm65rgb/readme.md create mode 100644 keyboards/kprepublic/bm65rgb/rev1/config.h create mode 100644 keyboards/kprepublic/bm65rgb/rev1/info.json create mode 100644 keyboards/kprepublic/bm65rgb/rev1/readme.md create mode 100644 keyboards/kprepublic/bm65rgb/rev1/rev1.c create mode 100644 keyboards/kprepublic/bm65rgb/rev1/rev1.h create mode 100644 keyboards/kprepublic/bm65rgb/rev1/rules.mk diff --git a/keyboards/kprepublic/bm65rgb/keymaps/default/keymap.c b/keyboards/kprepublic/bm65rgb/keymaps/default/keymap.c new file mode 100644 index 0000000000..dadeb9c149 --- /dev/null +++ b/keyboards/kprepublic/bm65rgb/keymaps/default/keymap.c @@ -0,0 +1,34 @@ +/* Copyright 2021 bytesapart + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_65_ansi_blocker( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_HOME, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_65_ansi_blocker( + KC_GRAVE, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, + _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + +}; diff --git a/keyboards/kprepublic/bm65rgb/keymaps/default/readme.md b/keyboards/kprepublic/bm65rgb/keymaps/default/readme.md new file mode 100644 index 0000000000..72171ee89a --- /dev/null +++ b/keyboards/kprepublic/bm65rgb/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for bm65rgb diff --git a/keyboards/kprepublic/bm65rgb/readme.md b/keyboards/kprepublic/bm65rgb/readme.md new file mode 100644 index 0000000000..3a87afabf1 --- /dev/null +++ b/keyboards/kprepublic/bm65rgb/readme.md @@ -0,0 +1,24 @@ +# bm65rgb + +![bm65rgb](https://i.imgur.com/DskSCve.jpeg) + +A 65% hotswap in switch RGB keyboard from KPRepublic. + +* Keyboard Maintainer: [bytesapart](https://github.com/bytesapart) +* Hardware Supported: BM65 RGB +* Hardware Availability: [KP Republic](https://kprepublic.com/products/bm65rgb-bm65-rgb-65-hot-swappable-custom-mechanical-keyboard-pcb-programmed-qmk-via-firmware-full-rgb-switch-underglow-type-c?_pos=1&_sid=5b9a6a5d0&_ss=r) + +Make example for this keyboard (after setting up your build environment): + + make kprepublic/bm65rgb:default + +Flashing example for this keyboard: + + make kprepublic/bm65rgb:default:flash + +To reset the board into bootloader mode, do one of the following: + +* Short the two-pad footprint to the left of the spacebar switch while the board is plugged in +* Hold the Esc key while connecting the USB cable (also erases persistent settings) + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/kprepublic/bm65rgb/rev1/config.h b/keyboards/kprepublic/bm65rgb/rev1/config.h new file mode 100644 index 0000000000..21624b9f16 --- /dev/null +++ b/keyboards/kprepublic/bm65rgb/rev1/config.h @@ -0,0 +1,122 @@ +/* +Copyright 2021 bytesapart + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4B50 //KP +#define PRODUCT_ID 0xEF6E +#define DEVICE_VER 0x0001 +#define MANUFACTURER KPRepublic +#define PRODUCT BM65 RGB + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { B0, \ + B1, \ + B2, \ + B3, \ + E6 } +#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7, F7, F6 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +// The pin connected to the data pin of the LEDs +#define RGB_DI_PIN E2 +// The number of LEDs connected +#define DRIVER_LED_TOTAL 73 +#ifdef RGB_DI_PIN + #define RGBLED_NUM 73 + #define RGB_MATRIX_KEYPRESSES // reacts to keypresses +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/kprepublic/bm65rgb/rev1/info.json b/keyboards/kprepublic/bm65rgb/rev1/info.json new file mode 100644 index 0000000000..444d8cee85 --- /dev/null +++ b/keyboards/kprepublic/bm65rgb/rev1/info.json @@ -0,0 +1,78 @@ +{ + "keyboard_name": "bm65rgb", + "url": "", + "maintainer": "bytesapart", + "layouts": { + "LAYOUT_65_ansi": { + "layout": [ + {"label":"K00 (B0,D0)", "x":0, "y":0}, + {"label":"K01 (B0,D1)", "x":1, "y":0}, + {"label":"K02 (B0,D2)", "x":2, "y":0}, + {"label":"K03 (B0,D3)", "x":3, "y":0}, + {"label":"K04 (B0,D5)", "x":4, "y":0}, + {"label":"K05 (B0,D4)", "x":5, "y":0}, + {"label":"K06 (B0,D6)", "x":6, "y":0}, + {"label":"K07 (B0,D7)", "x":7, "y":0}, + {"label":"K08 (B0,B4)", "x":8, "y":0}, + {"label":"K09 (B0,B5)", "x":9, "y":0}, + {"label":"K0A (B0,B6)", "x":10, "y":0}, + {"label":"K0B (B0,C6)", "x":11, "y":0}, + {"label":"K0C (B0,C7)", "x":12, "y":0}, + {"label":"K0D (B0,F7)", "x":13, "y":0, "w":2}, + {"label":"K0E (B0,F6)", "x":15, "y":0}, + {"label":"K10 (B1,D0)", "x":0, "y":1, "w":1.5}, + {"label":"K11 (B1,D1)", "x":1.5, "y":1}, + {"label":"K12 (B1,D2)", "x":2.5, "y":1}, + {"label":"K13 (B1,D3)", "x":3.5, "y":1}, + {"label":"K14 (B1,D5)", "x":4.5, "y":1}, + {"label":"K15 (B1,D4)", "x":5.5, "y":1}, + {"label":"K16 (B1,D6)", "x":6.5, "y":1}, + {"label":"K17 (B1,D7)", "x":7.5, "y":1}, + {"label":"K18 (B1,B4)", "x":8.5, "y":1}, + {"label":"K19 (B1,B5)", "x":9.5, "y":1}, + {"label":"K1A (B1,B6)", "x":10.5, "y":1}, + {"label":"K1B (B1,C6)", "x":11.5, "y":1}, + {"label":"K1C (B1,C7)", "x":12.5, "y":1}, + {"label":"K1D (B1,F7)", "x":13.5, "y":1, "w":1.5}, + {"label":"K1E (B1,F6)", "x":15, "y":1}, + {"label":"K20 (B2,D0)", "x":0, "y":2, "w":1.75}, + {"label":"K22 (B2,D2)", "x":1.75, "y":2}, + {"label":"K23 (B2,D3)", "x":2.75, "y":2}, + {"label":"K24 (B2,D5)", "x":3.75, "y":2}, + {"label":"K25 (B2,D4)", "x":4.75, "y":2}, + {"label":"K26 (B2,D6)", "x":5.75, "y":2}, + {"label":"K27 (B2,D7)", "x":6.75, "y":2}, + {"label":"K28 (B2,B4)", "x":7.75, "y":2}, + {"label":"K29 (B2,B5)", "x":8.75, "y":2}, + {"label":"K2A (B2,B6)", "x":9.75, "y":2}, + {"label":"K2B (B2,C6)", "x":10.75, "y":2}, + {"label":"K2C (B2,C7)", "x":11.75, "y":2}, + {"label":"K2D (B2,F7)", "x":12.75, "y":2, "w":2.25}, + {"label":"K2E (B2,F6)", "x":15, "y":2}, + {"label":"K31 (B3,D1)", "x":0, "y":3, "w":2.25}, + {"label":"K32 (B3,D2)", "x":2.25, "y":3}, + {"label":"K33 (B3,D3)", "x":3.25, "y":3}, + {"label":"K34 (B3,D5)", "x":4.25, "y":3}, + {"label":"K35 (B3,D4)", "x":5.25, "y":3}, + {"label":"K36 (B3,D6)", "x":6.25, "y":3}, + {"label":"K37 (B3,D7)", "x":7.25, "y":3}, + {"label":"K38 (B3,B4)", "x":8.25, "y":3}, + {"label":"K39 (B3,B5)", "x":9.25, "y":3}, + {"label":"K3A (B3,B6)", "x":10.25, "y":3}, + {"label":"K3B (B3,C6)", "x":11.25, "y":3}, + {"label":"K3C (B3,C7)", "x":12.25, "y":3, "w":1.75}, + {"label":"K3D (B3,F7)", "x":14, "y":3}, + {"label":"K3E (B3,F6)", "x":15, "y":3}, + {"label":"K40 (E6,D0)", "x":0, "y":4, "w":1.25}, + {"label":"K41 (E6,D1)", "x":1.25, "y":4, "w":1.25}, + {"label":"K42 (E6,D2)", "x":2.5, "y":4, "w":1.25}, + {"label":"K46 (E6,D6)", "x":3.75, "y":4, "w":6.25}, + {"label":"K49 (E6,B5)", "x":10, "y":4}, + {"label":"K4A (E6,B6)", "x":11, "y":4}, + {"label":"K49 (E6,B5)", "x":10, "y":4, "w":1.25}, + {"label":"K4A (E6,B6)", "x":11.25, "y":4, "w":1.25}, + {"label":"K4E (E6,F6)", "x":15, "y":4} + ] + } + } +} diff --git a/keyboards/kprepublic/bm65rgb/rev1/readme.md b/keyboards/kprepublic/bm65rgb/rev1/readme.md new file mode 100644 index 0000000000..119d05d20e --- /dev/null +++ b/keyboards/kprepublic/bm65rgb/rev1/readme.md @@ -0,0 +1,24 @@ +# bm65rgb + +![bm65rgb](https://i.imgur.com/DskSCve.jpeg) + +A 65% hotswap in switch RGB keyboard from KPRepublic. + +* Keyboard Maintainer: [bytesapart](https://github.com/bytesapart) +* Hardware Supported: BM65 RGB +* Hardware Availability: [KP Republic](https://kprepublic.com/products/bm65rgb-bm65-rgb-65-hot-swappable-custom-mechanical-keyboard-pcb-programmed-qmk-via-firmware-full-rgb-switch-underglow-type-c?_pos=1&_sid=5b9a6a5d0&_ss=r) + +Make example for this keyboard (after setting up your build environment): + + make kprepublic/bm65rgb/rev1:default + +Flashing example for this keyboard: + + make kprepublic/bm65rgb/rev1:default:flash + +To reset the board into bootloader mode, do one of the following: + +* Short the two-pad footprint to the left of the spacebar switch while the board is plugged in +* Hold the Esc key while connecting the USB cable (also erases persistent settings) + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/kprepublic/bm65rgb/rev1/rev1.c b/keyboards/kprepublic/bm65rgb/rev1/rev1.c new file mode 100644 index 0000000000..6f85f256e1 --- /dev/null +++ b/keyboards/kprepublic/bm65rgb/rev1/rev1.c @@ -0,0 +1,44 @@ +/* Copyright 2021 bytesapart + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "rev1.h" + +#ifdef RGB_MATRIX_ENABLE +led_config_t g_led_config = { { + // Key Matrix to LED Index + { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 }, + { 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29 }, + { 30, NO_LED, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43 }, + { NO_LED, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57 }, + { 58, 59, 60, NO_LED, NO_LED, NO_LED, 61, NO_LED, NO_LED, 62, 63, NO_LED, 64, 65, 66 } +}, { + // LED Index to Physical Position + { 0, 0}, { 15, 0}, { 30, 0}, { 45, 0}, { 60, 0}, { 75, 0}, { 90, 0}, {105, 0}, {120, 0}, {135, 0}, {150, 0}, {165, 0}, {180, 0}, {202, 0}, {225, 0}, // Esc, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, -, =, Backspace, Delete + { 4, 16}, { 22, 16}, { 37, 16}, { 52, 16}, { 67, 16}, { 82, 16}, { 97, 16}, {112, 16}, {127, 16}, {142, 16}, {157, 16}, {172, 16}, {187, 16}, {206, 16}, {225, 16}, // Tab, Q, W, E, R, T, Y, U, I, O, P, [, ], backslash , Home + { 6, 32}, { 26, 32}, { 41, 32}, { 56, 32}, { 71, 32}, { 86, 32}, {101, 32}, {116, 32}, {131, 32}, {146, 32}, {161, 32}, {176, 32}, {201, 32}, {225, 32}, // Capslock, A, S, D, F, G, H, J, K, L, ;, ', Enter, Page up + { 9, 48}, { 34, 48}, { 49, 48}, { 64, 48}, { 79, 48}, { 94, 48}, {109, 48}, {124, 48}, {139, 48}, {154, 48}, {169, 48}, {189, 48}, {208, 48}, {225, 48}, // LShift, Z, X, C, V, B, N, M, ,, ., /, Shift, Up, Page Down + { 2, 64}, { 21, 64}, { 39, 64}, { 94, 64}, {148, 64}, {163, 64}, {193, 64}, {208, 64}, {225, 64}, // Ctrl, GUI, Alt, Space, RAlt, FN, Left, Down, Right + {185, 45}, {160, 45}, {125, 45}, { 95, 45}, { 60, 45}, { 25, 45} // UNDERGLOW +}, { + // LED Index to Flag + 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, // Esc, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, -, =, Backspace, Delete + 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, // Tab, Q, W, E, R, T, Y, U, I, O, P, [, ], backslash , Home + 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, // Capslock, A, S, D, F, G, H, J, K, L, ;, ', Enter, Page up + 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, 1, 1, // LShift, Z, X, C, V, B, N, M, ,, ., /, Shift, Up, Page Down + 1, 1, 1, 4, 1, 1, 1, 1, 1, // Ctrl, GUI, Alt, Space, RAlt, FN, Left, Down, Right + 2, 2, 2, 2, 2, 2 // UNDERGLOW +} }; +#endif diff --git a/keyboards/kprepublic/bm65rgb/rev1/rev1.h b/keyboards/kprepublic/bm65rgb/rev1/rev1.h new file mode 100644 index 0000000000..4bafcf1943 --- /dev/null +++ b/keyboards/kprepublic/bm65rgb/rev1/rev1.h @@ -0,0 +1,41 @@ +/* Copyright 2021 bytesapart + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT_65_ansi_blocker( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E,\ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E,\ + k20, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E,\ + k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E,\ + k40, k41, k42, k46, k49, k4A, k4C, k4D, k4E\ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \ + { k20, KC_NO, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E }, \ + { KC_NO, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \ + { k40, k41, k42, KC_NO, KC_NO, KC_NO, k46, KC_NO, KC_NO, k49, k4A, KC_NO, k4C, k4D, k4E }, \ +} diff --git a/keyboards/kprepublic/bm65rgb/rev1/rules.mk b/keyboards/kprepublic/bm65rgb/rev1/rules.mk new file mode 100644 index 0000000000..a0e7019715 --- /dev/null +++ b/keyboards/kprepublic/bm65rgb/rev1/rules.mk @@ -0,0 +1,26 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +RGB_MATRIX_ENABLE = yes +RGB_MATRIX_DRIVER = WS2812 +LTO_ENABLE = yes + +LAYOUTS = 65_ansi_blocker From 6c507afcf212165dd5f3c3f6c026b517295c5090 Mon Sep 17 00:00:00 2001 From: SmollChungus <38044391+SmollChungus@users.noreply.github.com> Date: Wed, 27 Oct 2021 17:14:44 +0200 Subject: [PATCH 361/595] [Keyboard] add Lefty keyboard (#14898) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- keyboards/lefty/config.h | 44 ++++++++++++++++ keyboards/lefty/info.json | 43 ++++++++++++++++ keyboards/lefty/keymaps/default/keymap.c | 65 ++++++++++++++++++++++++ keyboards/lefty/keymaps/via/keymap.c | 65 ++++++++++++++++++++++++ keyboards/lefty/keymaps/via/rules.mk | 1 + keyboards/lefty/lefty.c | 43 ++++++++++++++++ keyboards/lefty/lefty.h | 37 ++++++++++++++ keyboards/lefty/readme.md | 27 ++++++++++ keyboards/lefty/rev1/config.h | 22 ++++++++ keyboards/lefty/rev1/rev1.c | 17 +++++++ keyboards/lefty/rev2/config.h | 21 ++++++++ keyboards/lefty/rev2/rev2.c | 17 +++++++ keyboards/lefty/rules.mk | 27 ++++++++++ 13 files changed, 429 insertions(+) create mode 100644 keyboards/lefty/config.h create mode 100644 keyboards/lefty/info.json create mode 100644 keyboards/lefty/keymaps/default/keymap.c create mode 100644 keyboards/lefty/keymaps/via/keymap.c create mode 100644 keyboards/lefty/keymaps/via/rules.mk create mode 100644 keyboards/lefty/lefty.c create mode 100644 keyboards/lefty/lefty.h create mode 100644 keyboards/lefty/readme.md create mode 100644 keyboards/lefty/rev1/config.h create mode 100644 keyboards/lefty/rev1/rev1.c create mode 100644 keyboards/lefty/rev2/config.h create mode 100644 keyboards/lefty/rev2/rev2.c create mode 100644 keyboards/lefty/rules.mk diff --git a/keyboards/lefty/config.h b/keyboards/lefty/config.h new file mode 100644 index 0000000000..85620ca15b --- /dev/null +++ b/keyboards/lefty/config.h @@ -0,0 +1,44 @@ +/* Copyright 2021 Smoll Chungus (@smollchungus) +* +* This program is free software: you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation, either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x5363 // Sc for Smollchungus +#define PRODUCT_ID 0x0001 +#define DEVICE_VER 0x0001 +#define MANUFACTURER SmollChungus +#define PRODUCT Lefty + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 8 + +/* key matrix pins are in subfolders v1/v2 */ + +/* Diode direction */ +#define DIODE_DIRECTION COL2ROW + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE diff --git a/keyboards/lefty/info.json b/keyboards/lefty/info.json new file mode 100644 index 0000000000..bd5d2f7c4e --- /dev/null +++ b/keyboards/lefty/info.json @@ -0,0 +1,43 @@ +{ + "keyboard_name": "lefty", + "url": "https://github.com/smollchungus", + "maintainer": "smollchungus", + "layouts": { + "LAYOUT_all": { + "layout": [ + {"label":"F1", "x":0.5, "y":0}, + {"label":"Escape", "x":2, "y":0}, + {"label":"1", "x":3, "y":0}, + {"label":"2", "x":4, "y":0}, + {"label":"3", "x":5, "y":0}, + {"label":"4", "x":6, "y":0}, + {"label":"5", "x":7, "y":0}, + {"label":"6", "x":8, "y":0}, + {"label":"F2", "x":0.25, "y":1}, + {"label":"Tab", "x":1.75, "y":1, "w":1.5}, + {"label":"Q", "x":3.25, "y":1}, + {"label":"W", "x":4.25, "y":1}, + {"label":"E", "x":5.25, "y":1}, + {"label":"R", "x":6.25, "y":1}, + {"label":"T", "x":7.25, "y":1}, + {"label":"F3", "x":0, "y":2}, + {"label":"Caps Lock", "x":1.5, "y":2, "w":1.75}, + {"label":"A", "x":3.25, "y":2}, + {"label":"S", "x":4.25, "y":2}, + {"label":"D", "x":5.25, "y":2}, + {"label":"F", "x":6.25, "y":2}, + {"label":"G", "x":7.25, "y":2}, + {"label":"Shift", "x":1.25, "y":3, "w":2.25}, + {"label":"Z", "x":3.5, "y":3}, + {"label":"X", "x":4.5, "y":3}, + {"label":"C", "x":5.5, "y":3}, + {"label":"V", "x":6.5, "y":3}, + {"label":"B", "x":7.5, "y":3}, + {"label":"Control", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":4.5, "y":4, "w":1.25}, + {"label":"Layer2", "x":5.75, "y":4, "w":2}, + {"label":"Layer3", "x":7.75, "y":4, "w":1.25} + ] + } + } +} diff --git a/keyboards/lefty/keymaps/default/keymap.c b/keyboards/lefty/keymaps/default/keymap.c new file mode 100644 index 0000000000..0e1f56c036 --- /dev/null +++ b/keyboards/lefty/keymaps/default/keymap.c @@ -0,0 +1,65 @@ +/* Copyright 2021 Smoll Chungus (@smollchungus) +* +* This program is free software: you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation, either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + +enum layers { + _QWERTY, + _LOWER, + _RAISE, + _SPECIAL, +}; + +#define LOWER MO(_LOWER) +#define RAISE MO(_RAISE) +#define SPECIAL MO(_SPECIAL) + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[_QWERTY] = LAYOUT_all( + KC_UP, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, + KC_DOWN, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, + KC_RGHT, LOWER, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, + KC_LCTL, KC_LALT, RAISE, SPECIAL +), + +[_LOWER] = LAYOUT_all( + ____, ____, ____, ____, ____, ____, ____, ____, + ____, ____, ____, ____, ____, ____, ____, + ____, ____, ____, ____, ____, ____, ____, + ____, ____, ____, ____, ____, ____, + ____, ____, ____, ____ +), + +[_RAISE] = LAYOUT_all( + ____, ____, ____, ____, ____, ____, ____, ____, + ____, ____, ____, ____, ____, ____, ____, + ____, ____, ____, ____, ____, ____, ____, + ____, ____, ____, ____, ____, ____, + ____, ____, ____, ____ +), + +[_SPECIAL] = LAYOUT_all( + ____, ____, ____, ____, ____, ____, ____, ____, + ____, ____, ____, ____, ____, ____, ____, + ____, ____, ____, ____, ____, ____, ____, + ____, ____, ____, ____, ____, ____, + ____, ____, ____, ____ +) +}; + diff --git a/keyboards/lefty/keymaps/via/keymap.c b/keyboards/lefty/keymaps/via/keymap.c new file mode 100644 index 0000000000..764aa80c82 --- /dev/null +++ b/keyboards/lefty/keymaps/via/keymap.c @@ -0,0 +1,65 @@ +/* Copyright 2021 Smoll Chungus (@smollchungus) +* +* This program is free software: you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation, either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + + +enum layers { + _QWERTY, + _LOWER, + _RAISE, + _SPECIAL, +}; + +#define LOWER MO(_LOWER) +#define RAISE MO(_RAISE) +#define SPECIAL MO(_SPECIAL) + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[_QWERTY] = LAYOUT_all( + KC_UP, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, + KC_DOWN, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, + KC_RGHT, LOWER, KC_A, KC_S, KC_D, KC_F, KC_G, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, + KC_LCTL, KC_LALT, RAISE, SPECIAL +), + +[_LOWER] = LAYOUT_all( + ____, ____, ____, ____, ____, ____, ____, ____, + ____, ____, ____, ____, ____, ____, ____, + ____, ____, ____, ____, ____, ____, ____, + ____, ____, ____, ____, ____, ____, + ____, ____, ____, ____ +), + +[_RAISE] = LAYOUT_all( + ____, ____, ____, ____, ____, ____, ____, ____, + ____, ____, ____, ____, ____, ____, ____, + ____, ____, ____, ____, ____, ____, ____, + ____, ____, ____, ____, ____, ____, + ____, ____, ____, ____ +), + +[_SPECIAL] = LAYOUT_all( + ____, ____, ____, ____, ____, ____, ____, ____, + ____, ____, ____, ____, ____, ____, ____, + ____, ____, ____, ____, ____, ____, ____, + ____, ____, ____, ____, ____, ____, + ____, ____, ____, ____ +) +}; diff --git a/keyboards/lefty/keymaps/via/rules.mk b/keyboards/lefty/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/lefty/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/lefty/lefty.c b/keyboards/lefty/lefty.c new file mode 100644 index 0000000000..ba4ac34383 --- /dev/null +++ b/keyboards/lefty/lefty.c @@ -0,0 +1,43 @@ +/* Copyright 2021 Smoll Chungus (@smollchungus) +* +* This program is free software: you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation, either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program. If not, see . +*/ + +#include "lefty.h" + +#ifdef OLED_ENABLE +__attribute__((weak)) void oled_task_user(void) { + // Host Keyboard Layer Status + oled_write_P(PSTR("Layer: "), false); + + switch (get_highest_layer(layer_state)) { + case 0: + oled_write_P(PSTR("Default\n"), false); + break; + case 1: + oled_write_P(PSTR("LOWER\n"), false); + break; + case 2: + oled_write_P(PSTR("RAISE\n"), false); + break; + case 3: + oled_write_P(PSTR("SPECIAL\n"), false); + break; + default: + // Or use the write_ln shortcut over adding '\n' to the end of your string + oled_write_ln_P(PSTR("Undefined"), false); + } + +} +#endif diff --git a/keyboards/lefty/lefty.h b/keyboards/lefty/lefty.h new file mode 100644 index 0000000000..2466552353 --- /dev/null +++ b/keyboards/lefty/lefty.h @@ -0,0 +1,37 @@ +/* Copyright 2021 Smoll Chungus (@smollchungus) +* +* This program is free software: you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation, either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program. If not, see . +*/ + +#pragma once + +#include "quantum.h" + +// keymap +#define LAYOUT_all( \ + K00, K01, K02, K03, K04, K05, K06, K07, \ + K10, K11, K12, K13, K14, K15, K16, \ + K20, K21, K22, K23, K24, K25, K26, \ + K31, K32, K33, K34, K35, K36, \ + K41, K43, K44, K46 \ +) \ +{ \ + { K00, K01, K02, K03, K04, K05, K06, K07 }, \ + { K10, K11, K12, K13, K14, K15, K16, KC_NO }, \ + { K20, K21, K22, K23, K24, K25, K26, KC_NO }, \ + { KC_NO, K31, K32, K33, K34, K35, K36, KC_NO }, \ + { KC_NO, K41, KC_NO, K43, K44, KC_NO, K46, KC_NO } \ +} + +#define LAYOUT LAYOUT diff --git a/keyboards/lefty/readme.md b/keyboards/lefty/readme.md new file mode 100644 index 0000000000..f8cc2ec203 --- /dev/null +++ b/keyboards/lefty/readme.md @@ -0,0 +1,27 @@ +# lefty + +![lefty](https://i.imgur.com/nMmJCJMh.jpeg) + +Half an alice used as a macropad. + +* Keyboard Maintainer: [SmollChungus](https://github.com/smollchungus/) + +* Hardware Supported: Lefty PCB rev1 and rev2 + +Make example for this keyboard (after setting up your build environment): + + make lefty:default + +Flashing example for this keyboard: + + make lefty:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. +Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +# Bootloader +Enter the bootloader in 3 ways: + +Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead +Keycode in layout: Press the key mapped to RESET if it is available diff --git a/keyboards/lefty/rev1/config.h b/keyboards/lefty/rev1/config.h new file mode 100644 index 0000000000..fa70eeb359 --- /dev/null +++ b/keyboards/lefty/rev1/config.h @@ -0,0 +1,22 @@ +/* Copyright 2021 Smoll Chungus (@smollchungus) +* +* This program is free software: you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation, either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program. If not, see . +*/ + +#pragma once + +/* key matrix pins */ + +#define MATRIX_ROW_PINS { F0, F1, C7, D5, B7 } +#define MATRIX_COL_PINS { D4, B5, F5, F6, F7, B1, B3, F4 } diff --git a/keyboards/lefty/rev1/rev1.c b/keyboards/lefty/rev1/rev1.c new file mode 100644 index 0000000000..81734fd7fc --- /dev/null +++ b/keyboards/lefty/rev1/rev1.c @@ -0,0 +1,17 @@ +/* Copyright 2021 Smoll Chungus (@smollchungus) +* +* This program is free software: you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation, either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program. If not, see . +*/ + +#include "lefty.h" diff --git a/keyboards/lefty/rev2/config.h b/keyboards/lefty/rev2/config.h new file mode 100644 index 0000000000..8289418728 --- /dev/null +++ b/keyboards/lefty/rev2/config.h @@ -0,0 +1,21 @@ +/* Copyright 2021 Smoll Chungus (@smollchungus) +* +* This program is free software: you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation, either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program. If not, see . +*/ + +#pragma once + +/* key matrix pins */ +#define MATRIX_ROW_PINS { B2, B6, D7, E6, B4 } +#define MATRIX_COL_PINS { D4, B5, F5, F6, F7, B1, B3, F4 } diff --git a/keyboards/lefty/rev2/rev2.c b/keyboards/lefty/rev2/rev2.c new file mode 100644 index 0000000000..81734fd7fc --- /dev/null +++ b/keyboards/lefty/rev2/rev2.c @@ -0,0 +1,17 @@ +/* Copyright 2021 Smoll Chungus (@smollchungus) +* +* This program is free software: you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation, either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program. If not, see . +*/ + +#include "lefty.h" diff --git a/keyboards/lefty/rules.mk b/keyboards/lefty/rules.mk new file mode 100644 index 0000000000..119ec3128a --- /dev/null +++ b/keyboards/lefty/rules.mk @@ -0,0 +1,27 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +LTO_ENABLE = yes + +OLED_ENABLE = yes +OLED_DRIVER = SSD1306 + +DEFAULT_FOLDER = lefty/rev2 From b780c797beb726839e99e3f4054f9b4c33331cdc Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Thu, 28 Oct 2021 01:07:53 +0100 Subject: [PATCH 362/595] Migrate makefile utilities to sub-directory (#14917) --- Makefile | 3 ++- build_keyboard.mk | 13 +++++++------ build_test.mk | 5 +++-- bootloader.mk => builddefs/bootloader.mk | 0 .../disable_features.mk | 0 .../generic_features.mk | 0 {quantum => builddefs}/mcu_selection.mk | 0 message.mk => builddefs/message.mk | 0 show_options.mk => builddefs/show_options.mk | 0 common.mk => paths.mk | 5 +++-- 10 files changed, 15 insertions(+), 11 deletions(-) rename bootloader.mk => builddefs/bootloader.mk (100%) rename disable_features.mk => builddefs/disable_features.mk (100%) rename generic_features.mk => builddefs/generic_features.mk (100%) rename {quantum => builddefs}/mcu_selection.mk (100%) rename message.mk => builddefs/message.mk (100%) rename show_options.mk => builddefs/show_options.mk (100%) rename common.mk => paths.mk (91%) diff --git a/Makefile b/Makefile index a1741dd961..c221cb89e0 100644 --- a/Makefile +++ b/Makefile @@ -425,7 +425,8 @@ define SET_SILENT_MODE endif endef -include $(ROOT_DIR)/message.mk +include paths.mk +include $(BUILDDEFS_PATH)/message.mk ifeq ($(strip $(BREAK_ON_ERRORS)), yes) HANDLE_ERROR = exit 1 diff --git a/build_keyboard.mk b/build_keyboard.mk index c1f4f93381..36c628c7ce 100644 --- a/build_keyboard.mk +++ b/build_keyboard.mk @@ -10,7 +10,8 @@ endif .DEFAULT_GOAL := all -include common.mk +include paths.mk +include $(BUILDDEFS_PATH)/message.mk # Set the qmk cli to use QMK_BIN ?= qmk @@ -164,7 +165,7 @@ ifeq ($(strip $(CONVERT_TO_PROTON_C)), yes) include platforms/chibios/boards/QMK_PROTON_C/convert_to_proton_c.mk endif -include quantum/mcu_selection.mk +include $(BUILDDEFS_PATH)/mcu_selection.mk # Find all the C source files to be compiled in subfolders. KEYBOARD_SRC := @@ -342,7 +343,7 @@ ifneq ("$(wildcard $(USER_PATH)/post_config.h)","") endif # Disable features that a keyboard doesn't support --include disable_features.mk +-include $(BUILDDEFS_PATH)/disable_features.mk # Pull in post_rules.mk files from all our subfolders ifneq ("$(wildcard $(KEYBOARD_PATH_1)/post_rules.mk)","") @@ -385,10 +386,10 @@ VPATH += $(KEYBOARD_PATHS) VPATH += $(COMMON_VPATH) include common_features.mk -include generic_features.mk +include $(BUILDDEFS_PATH)/generic_features.mk include $(TMK_PATH)/protocol.mk include $(TMK_PATH)/common.mk -include bootloader.mk +include $(BUILDDEFS_PATH)/bootloader.mk SRC += $(patsubst %.c,%.clib,$(LIB_SRC)) SRC += $(patsubst %.c,%.clib,$(QUANTUM_LIB_SRC)) @@ -445,7 +446,7 @@ check-size: build check-md5: build objs-size: build -include show_options.mk +include $(BUILDDEFS_PATH)/show_options.mk include $(TMK_PATH)/rules.mk # Ensure we have generated files available for each of the objects diff --git a/build_test.mk b/build_test.mk index dd66a008ee..8f1ff1e849 100644 --- a/build_test.mk +++ b/build_test.mk @@ -4,7 +4,8 @@ endif .DEFAULT_GOAL := all -include common.mk +include paths.mk +include $(BUILDDEFS_PATH)/message.mk TARGET=test/$(TEST) @@ -52,7 +53,7 @@ include tests/$(TEST)/rules.mk endif include common_features.mk -include generic_features.mk +include $(BUILDDEFS_PATH)/generic_features.mk include $(TMK_PATH)/common.mk include $(QUANTUM_PATH)/debounce/tests/rules.mk include $(QUANTUM_PATH)/sequencer/tests/rules.mk diff --git a/bootloader.mk b/builddefs/bootloader.mk similarity index 100% rename from bootloader.mk rename to builddefs/bootloader.mk diff --git a/disable_features.mk b/builddefs/disable_features.mk similarity index 100% rename from disable_features.mk rename to builddefs/disable_features.mk diff --git a/generic_features.mk b/builddefs/generic_features.mk similarity index 100% rename from generic_features.mk rename to builddefs/generic_features.mk diff --git a/quantum/mcu_selection.mk b/builddefs/mcu_selection.mk similarity index 100% rename from quantum/mcu_selection.mk rename to builddefs/mcu_selection.mk diff --git a/message.mk b/builddefs/message.mk similarity index 100% rename from message.mk rename to builddefs/message.mk diff --git a/show_options.mk b/builddefs/show_options.mk similarity index 100% rename from show_options.mk rename to builddefs/show_options.mk diff --git a/common.mk b/paths.mk similarity index 91% rename from common.mk rename to paths.mk index 8acea39376..78eaf39967 100644 --- a/common.mk +++ b/paths.mk @@ -1,5 +1,3 @@ -include message.mk - # Directory common source files exist TOP_DIR = . TMK_DIR = tmk_core @@ -15,6 +13,9 @@ DRIVER_PATH = $(DRIVER_DIR) PLATFORM_DIR = platforms PLATFORM_PATH = $(PLATFORM_DIR) +BUILDDEFS_DIR = builddefs +BUILDDEFS_PATH = $(BUILDDEFS_DIR) + BUILD_DIR := .build COMMON_VPATH := $(TOP_DIR) From 780e763c13052138e4d9ad379c4138c3b2c344a7 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Thu, 28 Oct 2021 02:43:51 +0100 Subject: [PATCH 363/595] Remove SERIAL_MOUSE (#14969) --- quantum/keyboard.c | 10 -- tmk_core/protocol.mk | 20 --- tmk_core/protocol/serial_mouse.h | 29 ----- tmk_core/protocol/serial_mouse_microsoft.c | 113 ----------------- tmk_core/protocol/serial_mouse_mousesystems.c | 119 ------------------ 5 files changed, 291 deletions(-) delete mode 100644 tmk_core/protocol/serial_mouse.h delete mode 100644 tmk_core/protocol/serial_mouse_microsoft.c delete mode 100644 tmk_core/protocol/serial_mouse_mousesystems.c diff --git a/quantum/keyboard.c b/quantum/keyboard.c index f8e36994d2..030fec2d3e 100644 --- a/quantum/keyboard.c +++ b/quantum/keyboard.c @@ -40,9 +40,6 @@ along with this program. If not, see . #ifdef PS2_MOUSE_ENABLE # include "ps2_mouse.h" #endif -#ifdef SERIAL_MOUSE_ENABLE -# include "serial_mouse.h" -#endif #ifdef RGBLIGHT_ENABLE # include "rgblight.h" #endif @@ -310,9 +307,6 @@ void keyboard_init(void) { #ifdef PS2_MOUSE_ENABLE ps2_mouse_init(); #endif -#ifdef SERIAL_MOUSE_ENABLE - serial_mouse_init(); -#endif #ifdef BACKLIGHT_ENABLE backlight_init(); #endif @@ -490,10 +484,6 @@ MATRIX_LOOP_END: ps2_mouse_task(); #endif -#ifdef SERIAL_MOUSE_ENABLE - serial_mouse_task(); -#endif - #ifdef POINTING_DEVICE_ENABLE pointing_device_task(); #endif diff --git a/tmk_core/protocol.mk b/tmk_core/protocol.mk index 8aa063c911..d4ad50db6a 100644 --- a/tmk_core/protocol.mk +++ b/tmk_core/protocol.mk @@ -1,25 +1,5 @@ PROTOCOL_DIR = protocol -ifeq ($(strip $(SERIAL_MOUSE_MICROSOFT_ENABLE)), yes) - SRC += $(PROTOCOL_DIR)/serial_mouse_microsoft.c - OPT_DEFS += -DSERIAL_MOUSE_ENABLE -DSERIAL_MOUSE_MICROSOFT \ - -DMOUSE_ENABLE -endif - -ifeq ($(strip $(SERIAL_MOUSE_MOUSESYSTEMS_ENABLE)), yes) - SRC += $(PROTOCOL_DIR)/serial_mouse_mousesystems.c - OPT_DEFS += -DSERIAL_MOUSE_ENABLE -DSERIAL_MOUSE_MOUSESYSTEMS \ - -DMOUSE_ENABLE -endif - -ifeq ($(strip $(SERIAL_MOUSE_USE_SOFT)), yes) - SRC += $(PROTOCOL_DIR)/serial_soft.c -endif - -ifeq ($(strip $(SERIAL_MOUSE_USE_UART)), yes) - SRC += $(PROTOCOL_DIR)/serial_uart.c -endif - ifeq ($(strip $(USB_HID_ENABLE)), yes) include $(TMK_DIR)/protocol/usb_hid.mk endif diff --git a/tmk_core/protocol/serial_mouse.h b/tmk_core/protocol/serial_mouse.h deleted file mode 100644 index cb83cf4f62..0000000000 --- a/tmk_core/protocol/serial_mouse.h +++ /dev/null @@ -1,29 +0,0 @@ -/* -Copyright 2014 Robin Haberkorn - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#pragma once - -#include - -#include "serial.h" - -static inline uint8_t serial_mouse_init(void) { - serial_init(); - return 0; -} - -void serial_mouse_task(void); diff --git a/tmk_core/protocol/serial_mouse_microsoft.c b/tmk_core/protocol/serial_mouse_microsoft.c deleted file mode 100644 index eff0bf6e45..0000000000 --- a/tmk_core/protocol/serial_mouse_microsoft.c +++ /dev/null @@ -1,113 +0,0 @@ -/* -Copyright 2014 Robin Haberkorn - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include -#include -#include - -#include "serial.h" -#include "serial_mouse.h" -#include "report.h" -#include "host.h" -#include "timer.h" -#include "print.h" -#include "debug.h" - -#ifdef MAX -# undef MAX -#endif -#define MAX(X, Y) ((X) > (Y) ? (X) : (Y)) - -static void print_usb_data(const report_mouse_t *report); - -void serial_mouse_task(void) { - /* 3 byte ring buffer */ - static uint8_t buffer[3]; - static int buffer_cur = 0; - - static report_mouse_t report = {}; - - int16_t rcv; - - rcv = serial_recv2(); - if (rcv < 0) /* no new data */ - return; - - if (debug_mouse) xprintf("serial_mouse: byte: %04X\n", rcv); - - /* - * If bit 6 is one, this signals the beginning - * of a 3 byte sequence/packet. - */ - if (rcv & (1 << 6)) buffer_cur = 0; - - buffer[buffer_cur] = (uint8_t)rcv; - - if (buffer_cur == 0 && buffer[buffer_cur] == 0x20) { - /* - * Logitech extension: This must be a follow-up on - * the last 3-byte packet signaling a middle button click - */ - report.buttons |= MOUSE_BTN3; - report.x = report.y = 0; - - print_usb_data(&report); - host_mouse_send(&report); - return; - } - - buffer_cur++; - - if (buffer_cur < 3) return; - buffer_cur = 0; - - /* - * parse 3 byte packet. - * NOTE: We only get a complete packet - * if the mouse moved or the button states - * change. - */ - report.buttons = 0; - if (buffer[0] & (1 << 5)) report.buttons |= MOUSE_BTN1; - if (buffer[0] & (1 << 4)) report.buttons |= MOUSE_BTN2; - - report.x = (buffer[0] << 6) | buffer[1]; - report.y = ((buffer[0] << 4) & 0xC0) | buffer[2]; - - /* USB HID uses values from -127 to 127 only */ - report.x = MAX(report.x, -127); - report.y = MAX(report.y, -127); - -#if 0 - if (!report.buttons && !report.x && !report.y) { - /* - * Microsoft extension: Middle mouse button pressed - * FIXME: I don't know how exactly this extension works. - */ - report.buttons |= MOUSE_BTN3; - } -#endif - - print_usb_data(&report); - host_mouse_send(&report); -} - -static void print_usb_data(const report_mouse_t *report) { - if (!debug_mouse) return; - - xprintf("serial_mouse usb: [%02X|%d %d %d %d]\n", report->buttons, report->x, report->y, report->v, report->h); -} diff --git a/tmk_core/protocol/serial_mouse_mousesystems.c b/tmk_core/protocol/serial_mouse_mousesystems.c deleted file mode 100644 index 0ec2b0399a..0000000000 --- a/tmk_core/protocol/serial_mouse_mousesystems.c +++ /dev/null @@ -1,119 +0,0 @@ -/* -Copyright 2014 Robin Haberkorn - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include -#include -#include - -#include "serial.h" -#include "serial_mouse.h" -#include "report.h" -#include "host.h" -#include "timer.h" -#include "print.h" -#include "debug.h" - -#ifdef MAX -# undef MAX -#endif -#define MAX(X, Y) ((X) > (Y) ? (X) : (Y)) - -//#define SERIAL_MOUSE_CENTER_SCROLL - -static void print_usb_data(const report_mouse_t *report); - -void serial_mouse_task(void) { - /* 5 byte ring buffer */ - static uint8_t buffer[5]; - static int buffer_cur = 0; - - int16_t rcv; - - report_mouse_t report = {0, 0, 0, 0, 0}; - - rcv = serial_recv2(); - if (rcv < 0) /* no new data */ - return; - - if (debug_mouse) xprintf("serial_mouse: byte: %04X\n", rcv); - - /* - * Synchronization: mouse(4) says that all - * bytes but the first one in the packet have - * bit 7 == 0, but this is untrue. - * Therefore we discard all bytes up to the - * first one with the characteristic bit pattern. - */ - if (buffer_cur == 0 && (rcv >> 3) != 0x10) return; - - buffer[buffer_cur++] = (uint8_t)rcv; - - if (buffer_cur < 5) return; - buffer_cur = 0; - -#ifdef SERIAL_MOUSE_CENTER_SCROLL - if ((buffer[0] & 0x7) == 0x5 && (buffer[1] || buffer[2])) { - /* USB HID uses only values from -127 to 127 */ - report.h = MAX((int8_t)buffer[1], -127); - report.v = MAX((int8_t)buffer[2], -127); - - print_usb_data(&report); - host_mouse_send(&report); - - if (buffer[3] || buffer[4]) { - report.h = MAX((int8_t)buffer[3], -127); - report.v = MAX((int8_t)buffer[4], -127); - - print_usb_data(&report); - host_mouse_send(&report); - } - - return; - } -#endif - - /* - * parse 5 byte packet. - * NOTE: We only get a complete packet - * if the mouse moved or the button states - * change. - */ - if (!(buffer[0] & (1 << 2))) report.buttons |= MOUSE_BTN1; - if (!(buffer[0] & (1 << 1))) report.buttons |= MOUSE_BTN3; - if (!(buffer[0] & (1 << 0))) report.buttons |= MOUSE_BTN2; - - /* USB HID uses only values from -127 to 127 */ - report.x = MAX((int8_t)buffer[1], -127); - report.y = MAX(-(int8_t)buffer[2], -127); - - print_usb_data(&report); - host_mouse_send(&report); - - if (buffer[3] || buffer[4]) { - report.x = MAX((int8_t)buffer[3], -127); - report.y = MAX(-(int8_t)buffer[4], -127); - - print_usb_data(&report); - host_mouse_send(&report); - } -} - -static void print_usb_data(const report_mouse_t *report) { - if (!debug_mouse) return; - - xprintf("serial_mouse usb: [%02X|%d %d %d %d]\n", report->buttons, report->x, report->y, report->v, report->h); -} From 0c87e2e7025140ca6105b7fec2639c78c3cd8109 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Thu, 28 Oct 2021 21:02:22 +0100 Subject: [PATCH 364/595] Move LTO logic from common.mk (#14973) --- keyboards/hub20/config.h | 6 ++---- keyboards/latin17rgb/config.h | 6 ++---- keyboards/latin6rgb/config.h | 6 ++---- keyboards/smallkeyboard/config.h | 6 ++---- .../thevankeyboards/minivan/keymaps/josjoha/config.h | 4 ++-- tmk_core/common.mk | 12 ------------ tmk_core/rules.mk | 9 +++++++++ 7 files changed, 19 insertions(+), 30 deletions(-) diff --git a/keyboards/hub20/config.h b/keyboards/hub20/config.h index f8e5d6be8d..fa78db3d97 100644 --- a/keyboards/hub20/config.h +++ b/keyboards/hub20/config.h @@ -108,7 +108,5 @@ along with this program. If not, see . #define LOCKING_RESYNC_ENABLE /* disable these deprecated features by default */ -#ifndef LINK_TIME_OPTIMIZATION_ENABLE - #define NO_ACTION_MACRO - #define NO_ACTION_FUNCTION -#endif +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION diff --git a/keyboards/latin17rgb/config.h b/keyboards/latin17rgb/config.h index 6a7ea8e781..1f52f9a651 100644 --- a/keyboards/latin17rgb/config.h +++ b/keyboards/latin17rgb/config.h @@ -49,10 +49,8 @@ #define DEBOUNCE 3 /* disable these deprecated features by default */ -//#ifndef LINK_TIME_OPTIMIZATION_ENABLE -//# define NO_ACTION_MACRO -//# define NO_ACTION_FUNCTION -//#endif +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION #ifdef RGB_MATRIX_ENABLE # define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects diff --git a/keyboards/latin6rgb/config.h b/keyboards/latin6rgb/config.h index fa9abbea6c..b356ded816 100644 --- a/keyboards/latin6rgb/config.h +++ b/keyboards/latin6rgb/config.h @@ -50,10 +50,8 @@ #define DEBOUNCE 3 /* disable these deprecated features by default */ -//#ifndef LINK_TIME_OPTIMIZATION_ENABLE -//# define NO_ACTION_MACRO -//# define NO_ACTION_FUNCTION -//#endif +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION #ifdef RGB_MATRIX_ENABLE # define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects diff --git a/keyboards/smallkeyboard/config.h b/keyboards/smallkeyboard/config.h index 24c81258c7..a343d767ff 100644 --- a/keyboards/smallkeyboard/config.h +++ b/keyboards/smallkeyboard/config.h @@ -50,10 +50,8 @@ #define DEBOUNCE 3 /* disable these deprecated features by default */ -//#ifndef LINK_TIME_OPTIMIZATION_ENABLE -//# define NO_ACTION_MACRO -//# define NO_ACTION_FUNCTION -//#endif +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION #ifdef RGB_MATRIX_ENABLE # define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects diff --git a/keyboards/thevankeyboards/minivan/keymaps/josjoha/config.h b/keyboards/thevankeyboards/minivan/keymaps/josjoha/config.h index 8098422784..9db4d596de 100644 --- a/keyboards/thevankeyboards/minivan/keymaps/josjoha/config.h +++ b/keyboards/thevankeyboards/minivan/keymaps/josjoha/config.h @@ -24,7 +24,7 @@ along with this program. If not, see . // place overrides here // Some defines meant to decrease the firmware size. The firmware is otherwise over the maximum (atmega32u4) -//# ifndef LINK_TIME_OPTIMIZATION_ENABLE +//# ifndef LTO_ENABLE //Disable old style macro handling: MACRO() & action_get_macro //# define NO_ACTION_MACRO // This saves 320 bytes //disable calling of action_function() from the fn_actions array (deprecated) @@ -40,7 +40,7 @@ along with this program. If not, see . // Attempts to reduce firmware size: - //#define LINK_TIME_OPTIMIZATION_ENABLE // Did not decrease firmware size when tested on 26 Jan 2020 + //#define LTO_ENABLE // Did not decrease firmware size when tested on 26 Jan 2020 //#define NO_DEBUG //disable debugging (already defined) //#define NO_PRINT JJdisable printing/debugging using hid_listen (already defined) //#define NO_ACTION_LAYER //disable layers (obviously need layers) diff --git a/tmk_core/common.mk b/tmk_core/common.mk index f0faa2dc3e..ce335f0d3c 100644 --- a/tmk_core/common.mk +++ b/tmk_core/common.mk @@ -100,18 +100,6 @@ ifeq ($(strip $(SHARED_EP_ENABLE)), yes) TMK_COMMON_DEFS += -DSHARED_EP_ENABLE endif -ifeq ($(strip $(LTO_ENABLE)), yes) - ifeq ($(PLATFORM),CHIBIOS) - $(info Enabling LTO on ChibiOS-targeting boards is known to have a high likelihood of failure.) - $(info If unsure, set LTO_ENABLE = no.) - endif - EXTRAFLAGS += -flto - TMK_COMMON_DEFS += -DLTO_ENABLE - TMK_COMMON_DEFS += -DLINK_TIME_OPTIMIZATON_ENABLE -else ifdef LINK_TIME_OPTIMIZATION_ENABLE - $(error The LINK_TIME_OPTIMIZATION_ENABLE flag has been renamed to LTO_ENABLE.) -endif - # Search Path VPATH += $(TMK_PATH)/$(COMMON_DIR) VPATH += $(TMK_PATH)/$(PLATFORM_COMMON_DIR) diff --git a/tmk_core/rules.mk b/tmk_core/rules.mk index 56a331e288..b17f85d375 100644 --- a/tmk_core/rules.mk +++ b/tmk_core/rules.mk @@ -82,6 +82,15 @@ endif # -Wall...: warning level # -Wa,...: tell GCC to pass this to the assembler. # -adhlns...: create assembler listing +ifeq ($(strip $(LTO_ENABLE)), yes) + ifeq ($(PLATFORM),CHIBIOS) + $(info Enabling LTO on ChibiOS-targeting boards is known to have a high likelihood of failure.) + $(info If unsure, set LTO_ENABLE = no.) + endif + CDEFS += -flto + CDEFS += -DLTO_ENABLE +endif + DEBUG_ENABLE ?= yes ifeq ($(strip $(SKIP_DEBUG_INFO)),yes) DEBUG_ENABLE=no From dcfffa7b67a072f7d9e37bd8c0029c53b61aeb0f Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Thu, 28 Oct 2021 22:31:59 +0100 Subject: [PATCH 365/595] Relocate protocol files within tmk_core/common/ (#14972) * Relocate non platform files within tmk_core/common/ * clang --- common_features.mk | 2 +- quantum/keyboard.c | 3 +++ {tmk_core/common => quantum}/raw_hid.h | 0 {tmk_core/common => quantum}/sync_timer.c | 0 {tmk_core/common => quantum}/sync_timer.h | 0 {tmk_core/common => quantum}/virtser.h | 2 ++ tmk_core/common.mk | 4 ---- tmk_core/protocol.mk | 6 ++++++ tmk_core/{common => protocol}/host.c | 0 tmk_core/{common => protocol}/host.h | 0 tmk_core/{common => protocol}/host_driver.h | 0 tmk_core/{common => protocol}/report.c | 4 ++-- tmk_core/{common => protocol}/report.h | 0 {quantum => tmk_core/protocol}/usb_device_state.c | 0 {quantum => tmk_core/protocol}/usb_device_state.h | 0 tmk_core/{common => protocol}/usb_util.c | 0 tmk_core/{common => protocol}/usb_util.h | 0 17 files changed, 14 insertions(+), 7 deletions(-) rename {tmk_core/common => quantum}/raw_hid.h (100%) rename {tmk_core/common => quantum}/sync_timer.c (100%) rename {tmk_core/common => quantum}/sync_timer.h (100%) rename {tmk_core/common => quantum}/virtser.h (89%) rename tmk_core/{common => protocol}/host.c (100%) rename tmk_core/{common => protocol}/host.h (100%) rename tmk_core/{common => protocol}/host_driver.h (100%) rename tmk_core/{common => protocol}/report.c (99%) rename tmk_core/{common => protocol}/report.h (100%) rename {quantum => tmk_core/protocol}/usb_device_state.c (100%) rename {quantum => tmk_core/protocol}/usb_device_state.h (100%) rename tmk_core/{common => protocol}/usb_util.c (100%) rename tmk_core/{common => protocol}/usb_util.h (100%) diff --git a/common_features.mk b/common_features.mk index af538b696f..1d7e955cdf 100644 --- a/common_features.mk +++ b/common_features.mk @@ -27,7 +27,7 @@ QUANTUM_SRC += \ $(QUANTUM_DIR)/keyboard.c \ $(QUANTUM_DIR)/keymap_common.c \ $(QUANTUM_DIR)/keycode_config.c \ - $(QUANTUM_DIR)/usb_device_state.c \ + $(QUANTUM_DIR)/sync_timer.c \ $(QUANTUM_DIR)/logging/debug.c \ $(QUANTUM_DIR)/logging/sendchar.c \ diff --git a/quantum/keyboard.c b/quantum/keyboard.c index 030fec2d3e..806e4ef7e8 100644 --- a/quantum/keyboard.c +++ b/quantum/keyboard.c @@ -94,6 +94,9 @@ along with this program. If not, see . #ifdef DIGITIZER_ENABLE # include "digitizer.h" #endif +#ifdef VIRTSER_ENABLE +# include "virtser.h" +#endif static uint32_t last_input_modification_time = 0; uint32_t last_input_activity_time(void) { return last_input_modification_time; } diff --git a/tmk_core/common/raw_hid.h b/quantum/raw_hid.h similarity index 100% rename from tmk_core/common/raw_hid.h rename to quantum/raw_hid.h diff --git a/tmk_core/common/sync_timer.c b/quantum/sync_timer.c similarity index 100% rename from tmk_core/common/sync_timer.c rename to quantum/sync_timer.c diff --git a/tmk_core/common/sync_timer.h b/quantum/sync_timer.h similarity index 100% rename from tmk_core/common/sync_timer.h rename to quantum/sync_timer.h diff --git a/tmk_core/common/virtser.h b/quantum/virtser.h similarity index 89% rename from tmk_core/common/virtser.h rename to quantum/virtser.h index a0645f9e03..df7e87984c 100644 --- a/tmk_core/common/virtser.h +++ b/quantum/virtser.h @@ -1,5 +1,7 @@ #pragma once +void virtser_init(void); + /* Define this function in your code to process incoming bytes */ void virtser_recv(const uint8_t ch); diff --git a/tmk_core/common.mk b/tmk_core/common.mk index ce335f0d3c..8fa1a31e80 100644 --- a/tmk_core/common.mk +++ b/tmk_core/common.mk @@ -2,10 +2,6 @@ COMMON_DIR = common PLATFORM_COMMON_DIR = $(COMMON_DIR)/$(PLATFORM_KEY) TMK_COMMON_SRC += \ - $(COMMON_DIR)/host.c \ - $(COMMON_DIR)/report.c \ - $(COMMON_DIR)/sync_timer.c \ - $(COMMON_DIR)/usb_util.c \ $(PLATFORM_COMMON_DIR)/platform.c \ $(PLATFORM_COMMON_DIR)/suspend.c \ $(PLATFORM_COMMON_DIR)/timer.c \ diff --git a/tmk_core/protocol.mk b/tmk_core/protocol.mk index d4ad50db6a..359ddbfef1 100644 --- a/tmk_core/protocol.mk +++ b/tmk_core/protocol.mk @@ -1,5 +1,11 @@ PROTOCOL_DIR = protocol +TMK_COMMON_SRC += \ + $(PROTOCOL_DIR)/host.c \ + $(PROTOCOL_DIR)/report.c \ + $(PROTOCOL_DIR)/usb_device_state.c \ + $(PROTOCOL_DIR)/usb_util.c \ + ifeq ($(strip $(USB_HID_ENABLE)), yes) include $(TMK_DIR)/protocol/usb_hid.mk endif diff --git a/tmk_core/common/host.c b/tmk_core/protocol/host.c similarity index 100% rename from tmk_core/common/host.c rename to tmk_core/protocol/host.c diff --git a/tmk_core/common/host.h b/tmk_core/protocol/host.h similarity index 100% rename from tmk_core/common/host.h rename to tmk_core/protocol/host.h diff --git a/tmk_core/common/host_driver.h b/tmk_core/protocol/host_driver.h similarity index 100% rename from tmk_core/common/host_driver.h rename to tmk_core/protocol/host_driver.h diff --git a/tmk_core/common/report.c b/tmk_core/protocol/report.c similarity index 99% rename from tmk_core/common/report.c rename to tmk_core/protocol/report.c index 2a7fc006c4..854b59ae48 100644 --- a/tmk_core/common/report.c +++ b/tmk_core/protocol/report.c @@ -24,8 +24,8 @@ #ifdef RING_BUFFERED_6KRO_REPORT_ENABLE # define RO_ADD(a, b) ((a + b) % KEYBOARD_REPORT_KEYS) # define RO_SUB(a, b) ((a - b + KEYBOARD_REPORT_KEYS) % KEYBOARD_REPORT_KEYS) -# define RO_INC(a) RO_ADD(a, 1) -# define RO_DEC(a) RO_SUB(a, 1) +# define RO_INC(a) RO_ADD(a, 1) +# define RO_DEC(a) RO_SUB(a, 1) static int8_t cb_head = 0; static int8_t cb_tail = 0; static int8_t cb_count = 0; diff --git a/tmk_core/common/report.h b/tmk_core/protocol/report.h similarity index 100% rename from tmk_core/common/report.h rename to tmk_core/protocol/report.h diff --git a/quantum/usb_device_state.c b/tmk_core/protocol/usb_device_state.c similarity index 100% rename from quantum/usb_device_state.c rename to tmk_core/protocol/usb_device_state.c diff --git a/quantum/usb_device_state.h b/tmk_core/protocol/usb_device_state.h similarity index 100% rename from quantum/usb_device_state.h rename to tmk_core/protocol/usb_device_state.h diff --git a/tmk_core/common/usb_util.c b/tmk_core/protocol/usb_util.c similarity index 100% rename from tmk_core/common/usb_util.c rename to tmk_core/protocol/usb_util.c diff --git a/tmk_core/common/usb_util.h b/tmk_core/protocol/usb_util.h similarity index 100% rename from tmk_core/common/usb_util.h rename to tmk_core/protocol/usb_util.h From 0f9261424097863d23b6f4835dd3f374c6776ec7 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Thu, 28 Oct 2021 23:43:57 +0100 Subject: [PATCH 366/595] Fix develop after recent changes (#14975) * Fix sleep led issues * Fix tests --- build_test.mk | 1 + quantum/keyboard.c | 3 +++ 2 files changed, 4 insertions(+) diff --git a/build_test.mk b/build_test.mk index 8f1ff1e849..6e4494d77f 100644 --- a/build_test.mk +++ b/build_test.mk @@ -55,6 +55,7 @@ endif include common_features.mk include $(BUILDDEFS_PATH)/generic_features.mk include $(TMK_PATH)/common.mk +include $(TMK_PATH)/protocol.mk include $(QUANTUM_PATH)/debounce/tests/rules.mk include $(QUANTUM_PATH)/sequencer/tests/rules.mk include $(TMK_PATH)/common/test/rules.mk diff --git a/quantum/keyboard.c b/quantum/keyboard.c index 806e4ef7e8..3bca05aab7 100644 --- a/quantum/keyboard.c +++ b/quantum/keyboard.c @@ -97,6 +97,9 @@ along with this program. If not, see . #ifdef VIRTSER_ENABLE # include "virtser.h" #endif +#ifdef SLEEP_LED_ENABLE +# include "sleep_led.h" +#endif static uint32_t last_input_modification_time = 0; uint32_t last_input_activity_time(void) { return last_input_modification_time; } From 55fb468d7453eb31bc1793772938e2d28881fcaa Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Fri, 29 Oct 2021 11:16:19 +0100 Subject: [PATCH 367/595] More platform/protocol alignment (#14976) --- builddefs/generic_features.mk | 1 + common_features.mk | 7 +++ tmk_core/common.mk | 86 ----------------------------------- tmk_core/protocol.mk | 76 +++++++++++++++++++++++++++++++ 4 files changed, 84 insertions(+), 86 deletions(-) diff --git a/builddefs/generic_features.mk b/builddefs/generic_features.mk index ff02d56bbe..2281a82917 100644 --- a/builddefs/generic_features.mk +++ b/builddefs/generic_features.mk @@ -31,6 +31,7 @@ GENERIC_FEATURES = \ LEADER \ PROGRAMMABLE_BUTTON \ SPACE_CADET \ + SWAP_HANDS \ TAP_DANCE \ VELOCIKEY \ WPM \ diff --git a/common_features.mk b/common_features.mk index 1d7e955cdf..0d6b86b1ef 100644 --- a/common_features.mk +++ b/common_features.mk @@ -326,6 +326,13 @@ ifneq ($(strip $(VARIABLE_TRACE)),no) endif endif +ifeq ($(strip $(SLEEP_LED_ENABLE)), yes) + SRC += $(PLATFORM_COMMON_DIR)/sleep_led.c + OPT_DEFS += -DSLEEP_LED_ENABLE + + NO_SUSPEND_POWER_DOWN := yes +endif + VALID_BACKLIGHT_TYPES := pwm timer software custom BACKLIGHT_ENABLE ?= no diff --git a/tmk_core/common.mk b/tmk_core/common.mk index 8fa1a31e80..555b942c9d 100644 --- a/tmk_core/common.mk +++ b/tmk_core/common.mk @@ -10,92 +10,6 @@ TMK_COMMON_SRC += \ # Use platform provided print if it exists -include $(TMK_PATH)/$(PLATFORM_COMMON_DIR)/printf.mk -SHARED_EP_ENABLE = no -MOUSE_SHARED_EP ?= yes -ifeq ($(strip $(KEYBOARD_SHARED_EP)), yes) - TMK_COMMON_DEFS += -DKEYBOARD_SHARED_EP - SHARED_EP_ENABLE = yes - # With the current usb_descriptor.c code, - # you can't share kbd without sharing mouse; - # that would be a very unexpected use case anyway - MOUSE_SHARED_EP = yes -endif - -ifeq ($(strip $(MOUSE_ENABLE)), yes) - OPT_DEFS += -DMOUSE_ENABLE - ifeq ($(strip $(MOUSE_SHARED_EP)), yes) - TMK_COMMON_DEFS += -DMOUSE_SHARED_EP - SHARED_EP_ENABLE = yes - endif -endif - -ifeq ($(strip $(EXTRAKEY_ENABLE)), yes) - TMK_COMMON_DEFS += -DEXTRAKEY_ENABLE - SHARED_EP_ENABLE = yes -endif - -ifeq ($(strip $(RAW_ENABLE)), yes) - TMK_COMMON_DEFS += -DRAW_ENABLE -endif - -ifeq ($(strip $(CONSOLE_ENABLE)), yes) - TMK_COMMON_DEFS += -DCONSOLE_ENABLE -else - # TODO: decouple this so other print backends can exist - TMK_COMMON_DEFS += -DNO_PRINT - TMK_COMMON_DEFS += -DNO_DEBUG -endif - -ifeq ($(strip $(NKRO_ENABLE)), yes) - ifeq ($(PROTOCOL), VUSB) - $(info NKRO is not currently supported on V-USB, and has been disabled.) - else ifeq ($(strip $(BLUETOOTH_ENABLE)), yes) - $(info NKRO is not currently supported with Bluetooth, and has been disabled.) - else - TMK_COMMON_DEFS += -DNKRO_ENABLE - SHARED_EP_ENABLE = yes - endif -endif - -ifeq ($(strip $(RING_BUFFERED_6KRO_REPORT_ENABLE)), yes) - TMK_COMMON_DEFS += -DRING_BUFFERED_6KRO_REPORT_ENABLE -endif - -ifeq ($(strip $(SLEEP_LED_ENABLE)), yes) - TMK_COMMON_SRC += $(PLATFORM_COMMON_DIR)/sleep_led.c - TMK_COMMON_DEFS += -DSLEEP_LED_ENABLE - TMK_COMMON_DEFS += -DNO_SUSPEND_POWER_DOWN -endif - -ifeq ($(strip $(NO_SUSPEND_POWER_DOWN)), yes) - TMK_COMMON_DEFS += -DNO_SUSPEND_POWER_DOWN -endif - -ifeq ($(strip $(SWAP_HANDS_ENABLE)), yes) - TMK_COMMON_DEFS += -DSWAP_HANDS_ENABLE -endif - -ifeq ($(strip $(NO_USB_STARTUP_CHECK)), yes) - TMK_COMMON_DEFS += -DNO_USB_STARTUP_CHECK -endif - -ifeq ($(strip $(DIGITIZER_SHARED_EP)), yes) - TMK_COMMON_DEFS += -DDIGITIZER_SHARED_EP - SHARED_EP_ENABLE = yes -endif - -ifeq ($(strip $(DIGITIZER_ENABLE)), yes) - TMK_COMMON_DEFS += -DDIGITIZER_ENABLE - ifeq ($(strip $(SHARED_EP_ENABLE)), yes) - TMK_COMMON_DEFS += -DDIGITIZER_SHARED_EP - SHARED_EP_ENABLE = yes - endif -endif - -ifeq ($(strip $(SHARED_EP_ENABLE)), yes) - TMK_COMMON_DEFS += -DSHARED_EP_ENABLE -endif - # Search Path VPATH += $(TMK_PATH)/$(COMMON_DIR) VPATH += $(TMK_PATH)/$(PLATFORM_COMMON_DIR) diff --git a/tmk_core/protocol.mk b/tmk_core/protocol.mk index 359ddbfef1..a8723e6b2e 100644 --- a/tmk_core/protocol.mk +++ b/tmk_core/protocol.mk @@ -6,6 +6,82 @@ TMK_COMMON_SRC += \ $(PROTOCOL_DIR)/usb_device_state.c \ $(PROTOCOL_DIR)/usb_util.c \ +SHARED_EP_ENABLE = no +MOUSE_SHARED_EP ?= yes +ifeq ($(strip $(KEYBOARD_SHARED_EP)), yes) + TMK_COMMON_DEFS += -DKEYBOARD_SHARED_EP + SHARED_EP_ENABLE = yes + # With the current usb_descriptor.c code, + # you can't share kbd without sharing mouse; + # that would be a very unexpected use case anyway + MOUSE_SHARED_EP = yes +endif + +ifeq ($(strip $(MOUSE_ENABLE)), yes) + OPT_DEFS += -DMOUSE_ENABLE + ifeq ($(strip $(MOUSE_SHARED_EP)), yes) + TMK_COMMON_DEFS += -DMOUSE_SHARED_EP + SHARED_EP_ENABLE = yes + endif +endif + +ifeq ($(strip $(EXTRAKEY_ENABLE)), yes) + TMK_COMMON_DEFS += -DEXTRAKEY_ENABLE + SHARED_EP_ENABLE = yes +endif + +ifeq ($(strip $(RAW_ENABLE)), yes) + TMK_COMMON_DEFS += -DRAW_ENABLE +endif + +ifeq ($(strip $(CONSOLE_ENABLE)), yes) + TMK_COMMON_DEFS += -DCONSOLE_ENABLE +else + # TODO: decouple this so other print backends can exist + TMK_COMMON_DEFS += -DNO_PRINT + TMK_COMMON_DEFS += -DNO_DEBUG +endif + +ifeq ($(strip $(NKRO_ENABLE)), yes) + ifeq ($(PROTOCOL), VUSB) + $(info NKRO is not currently supported on V-USB, and has been disabled.) + else ifeq ($(strip $(BLUETOOTH_ENABLE)), yes) + $(info NKRO is not currently supported with Bluetooth, and has been disabled.) + else + TMK_COMMON_DEFS += -DNKRO_ENABLE + SHARED_EP_ENABLE = yes + endif +endif + +ifeq ($(strip $(RING_BUFFERED_6KRO_REPORT_ENABLE)), yes) + TMK_COMMON_DEFS += -DRING_BUFFERED_6KRO_REPORT_ENABLE +endif + +ifeq ($(strip $(NO_SUSPEND_POWER_DOWN)), yes) + TMK_COMMON_DEFS += -DNO_SUSPEND_POWER_DOWN +endif + +ifeq ($(strip $(NO_USB_STARTUP_CHECK)), yes) + TMK_COMMON_DEFS += -DNO_USB_STARTUP_CHECK +endif + +ifeq ($(strip $(DIGITIZER_SHARED_EP)), yes) + TMK_COMMON_DEFS += -DDIGITIZER_SHARED_EP + SHARED_EP_ENABLE = yes +endif + +ifeq ($(strip $(DIGITIZER_ENABLE)), yes) + TMK_COMMON_DEFS += -DDIGITIZER_ENABLE + ifeq ($(strip $(SHARED_EP_ENABLE)), yes) + TMK_COMMON_DEFS += -DDIGITIZER_SHARED_EP + SHARED_EP_ENABLE = yes + endif +endif + +ifeq ($(strip $(SHARED_EP_ENABLE)), yes) + TMK_COMMON_DEFS += -DSHARED_EP_ENABLE +endif + ifeq ($(strip $(USB_HID_ENABLE)), yes) include $(TMK_DIR)/protocol/usb_hid.mk endif From 736d9fa5384977159abf55b72251c93a5dba8356 Mon Sep 17 00:00:00 2001 From: just-another-jxliu Date: Fri, 29 Oct 2021 13:11:48 -0700 Subject: [PATCH 368/595] Stop-gap forward-port Drop LED features for CTRL and ALT (#14967) --- keyboards/massdrop/alt/config_led.h | 37 ++++---- .../massdrop/alt/keymaps/default_md/keymap.c | 87 +++++++++++++++++- .../massdrop/alt/keymaps/mac_md/keymap.c | 87 +++++++++++++++++- keyboards/massdrop/ctrl/config_led.h | 34 +++---- .../massdrop/ctrl/keymaps/default_md/keymap.c | 91 +++++++++++++++++-- .../massdrop/ctrl/keymaps/mac_md/keymap.c | 87 +++++++++++++++++- tmk_core/protocol/arm_atsam/md_rgb_matrix.c | 48 +++++++++- tmk_core/protocol/arm_atsam/md_rgb_matrix.h | 21 +++++ 8 files changed, 430 insertions(+), 62 deletions(-) diff --git a/keyboards/massdrop/alt/config_led.h b/keyboards/massdrop/alt/config_led.h index 82117b3327..b600dd23b9 100644 --- a/keyboards/massdrop/alt/config_led.h +++ b/keyboards/massdrop/alt/config_led.h @@ -58,7 +58,7 @@ along with this program. If not, see . //swr: Matrix wiring SW Red row (1-12) //swg: Matrix wiring SW Green row (1-12) //swb: Matrix wiring SW Blue row (1-12) -//scan: Associated key scancode if any +//scan: Associated key matrix scancode (set 255 if none or 254 for LED to turn off in alternating mode) //Note: Origin 0,0 may be located anywhere as the software will do the final layout #define ISSI3733_LED_MAP { \ { .id = 1, .x = 0, .y = 0, .adr = { .drv = 2, .cs = 2, .swr = 2, .swg = 1, .swb = 3 }, .scan = 0 }, \ @@ -129,46 +129,45 @@ along with this program. If not, see . { .id = 66, .x = 10.5, .y = -3, .adr = { .drv = 1, .cs = 12, .swr = 8, .swg = 7, .swb = 9 }, .scan = 73 }, \ { .id = 67, .x = 11.25, .y = -3, .adr = { .drv = 1, .cs = 12, .swr = 5, .swg = 4, .swb = 6 }, .scan = 74 }, \ { .id = 68, .x = -0.338, .y = -3.338, .adr = { .drv = 2, .cs = 11, .swr = 11, .swg = 10, .swb = 12 }, .scan = 255 }, \ - { .id = 69, .x = 0.39, .y = -3.443, .adr = { .drv = 2, .cs = 11, .swr = 8, .swg = 7, .swb = 9 }, .scan = 255 }, \ + { .id = 69, .x = 0.39, .y = -3.443, .adr = { .drv = 2, .cs = 11, .swr = 8, .swg = 7, .swb = 9 }, .scan = 254 }, \ { .id = 70, .x = 1.263, .y = -3.443, .adr = { .drv = 2, .cs = 11, .swr = 5, .swg = 4, .swb = 6 }, .scan = 255 }, \ - { .id = 71, .x = 2.135, .y = -3.443, .adr = { .drv = 2, .cs = 11, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 71, .x = 2.135, .y = -3.443, .adr = { .drv = 2, .cs = 11, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \ { .id = 72, .x = 3.008, .y = -3.443, .adr = { .drv = 2, .cs = 12, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ - { .id = 73, .x = 3.88, .y = -3.443, .adr = { .drv = 2, .cs = 12, .swr = 5, .swg = 4, .swb = 6 }, .scan = 255 }, \ + { .id = 73, .x = 3.88, .y = -3.443, .adr = { .drv = 2, .cs = 12, .swr = 5, .swg = 4, .swb = 6 }, .scan = 254 }, \ { .id = 74, .x = 4.753, .y = -3.443, .adr = { .drv = 2, .cs = 13, .swr = 5, .swg = 4, .swb = 6 }, .scan = 255 }, \ - { .id = 75, .x = 5.625, .y = -3.443, .adr = { .drv = 2, .cs = 13, .swr = 8, .swg = 7, .swb = 9 }, .scan = 255 }, \ + { .id = 75, .x = 5.625, .y = -3.443, .adr = { .drv = 2, .cs = 13, .swr = 8, .swg = 7, .swb = 9 }, .scan = 254 }, \ { .id = 76, .x = 6.497, .y = -3.443, .adr = { .drv = 1, .cs = 9, .swr = 8, .swg = 7, .swb = 9 }, .scan = 255 }, \ - { .id = 77, .x = 7.37, .y = -3.443, .adr = { .drv = 1, .cs = 9, .swr = 5, .swg = 4, .swb = 6 }, .scan = 255 }, \ + { .id = 77, .x = 7.37, .y = -3.443, .adr = { .drv = 1, .cs = 9, .swr = 5, .swg = 4, .swb = 6 }, .scan = 254 }, \ { .id = 78, .x = 8.242, .y = -3.443, .adr = { .drv = 1, .cs = 9, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ - { .id = 79, .x = 9.115, .y = -3.443, .adr = { .drv = 1, .cs = 13, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 79, .x = 9.115, .y = -3.443, .adr = { .drv = 1, .cs = 13, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \ { .id = 80, .x = 9.987, .y = -3.443, .adr = { .drv = 1, .cs = 13, .swr = 8, .swg = 7, .swb = 9 }, .scan = 255 }, \ - { .id = 81, .x = 10.86, .y = -3.443, .adr = { .drv = 1, .cs = 13, .swr = 5, .swg = 4, .swb = 6 }, .scan = 255 }, \ + { .id = 81, .x = 10.86, .y = -3.443, .adr = { .drv = 1, .cs = 13, .swr = 5, .swg = 4, .swb = 6 }, .scan = 254 }, \ { .id = 82, .x = 11.588, .y = -3.338, .adr = { .drv = 1, .cs = 13, .swr = 11, .swg = 10, .swb = 12 }, .scan = 255 }, \ - { .id = 83, .x = 11.693, .y = -2.623, .adr = { .drv = 1, .cs = 12, .swr = 11, .swg = 10, .swb = 12 }, .scan = 255 }, \ + { .id = 83, .x = 11.693, .y = -2.623, .adr = { .drv = 1, .cs = 12, .swr = 11, .swg = 10, .swb = 12 }, .scan = 254 }, \ { .id = 84, .x = 11.693, .y = -1.873, .adr = { .drv = 1, .cs = 8, .swr = 11, .swg = 10, .swb = 12 }, .scan = 255 }, \ { .id = 85, .x = 11.693, .y = -1.123, .adr = { .drv = 1, .cs = 8, .swr = 8, .swg = 7, .swb = 9 }, .scan = 255 }, \ - { .id = 86, .x = 11.693, .y = -0.373, .adr = { .drv = 1, .cs = 8, .swr = 5, .swg = 4, .swb = 6 }, .scan = 255 }, \ + { .id = 86, .x = 11.693, .y = -0.373, .adr = { .drv = 1, .cs = 8, .swr = 5, .swg = 4, .swb = 6 }, .scan = 254 }, \ { .id = 87, .x = 11.588, .y = 0.338, .adr = { .drv = 1, .cs = 8, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ { .id = 88, .x = 9.908, .y = 0.443, .adr = { .drv = 1, .cs = 6, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ - { .id = 89, .x = 9.288, .y = 0.443, .adr = { .drv = 1, .cs = 5, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 89, .x = 9.288, .y = 0.443, .adr = { .drv = 1, .cs = 5, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \ { .id = 90, .x = 8.625, .y = 0.443, .adr = { .drv = 1, .cs = 4, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ - { .id = 91, .x = 7.875, .y = 0.443, .adr = { .drv = 1, .cs = 3, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 91, .x = 7.875, .y = 0.443, .adr = { .drv = 1, .cs = 3, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \ { .id = 92, .x = 7.125, .y = 0.443, .adr = { .drv = 1, .cs = 2, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ - { .id = 93, .x = 6.375, .y = 0.443, .adr = { .drv = 1, .cs = 1, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 93, .x = 6.375, .y = 0.443, .adr = { .drv = 1, .cs = 1, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \ { .id = 94, .x = 5.625, .y = 0.443, .adr = { .drv = 1, .cs = 14, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ - { .id = 95, .x = 4.875, .y = 0.443, .adr = { .drv = 2, .cs = 8, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 95, .x = 4.875, .y = 0.443, .adr = { .drv = 2, .cs = 8, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \ { .id = 96, .x = 4.125, .y = 0.443, .adr = { .drv = 2, .cs = 7, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ - { .id = 97, .x = 3.375, .y = 0.443, .adr = { .drv = 2, .cs = 6, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 97, .x = 3.375, .y = 0.443, .adr = { .drv = 2, .cs = 6, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \ { .id = 98, .x = 2.625, .y = 0.443, .adr = { .drv = 2, .cs = 5, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ - { .id = 99, .x = 1.875, .y = 0.443, .adr = { .drv = 2, .cs = 4, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 99, .x = 1.875, .y = 0.443, .adr = { .drv = 2, .cs = 4, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \ { .id = 100, .x = 1.125, .y = 0.443, .adr = { .drv = 2, .cs = 3, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ { .id = 101, .x = -0.338, .y = 0.338, .adr = { .drv = 2, .cs = 1, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ - { .id = 102, .x = -0.443, .y = -0.373, .adr = { .drv = 2, .cs = 1, .swr = 5, .swg = 4, .swb = 6 }, .scan = 255 }, \ + { .id = 102, .x = -0.443, .y = -0.373, .adr = { .drv = 2, .cs = 1, .swr = 5, .swg = 4, .swb = 6 }, .scan = 254 }, \ { .id = 103, .x = -0.443, .y = -1.123, .adr = { .drv = 2, .cs = 1, .swr = 8, .swg = 7, .swb = 9 }, .scan = 255 }, \ { .id = 104, .x = -0.443, .y = -1.873, .adr = { .drv = 2, .cs = 1, .swr = 11, .swg = 10, .swb = 12 }, .scan = 255 }, \ - { .id = 105, .x = -0.443, .y = -2.623, .adr = { .drv = 2, .cs = 10, .swr = 11, .swg = 10, .swb = 12 }, .scan = 255 }, \ + { .id = 105, .x = -0.443, .y = -2.623, .adr = { .drv = 2, .cs = 10, .swr = 11, .swg = 10, .swb = 12 }, .scan = 254 }, \ }; - #define USB_LED_INDICATOR_ENABLE //Comment out to disable indicator functionality #ifdef USB_LED_INDICATOR_ENABLE //Scan codes refer to actual key matrix codes, not KC_* (255 to disable) #define USB_LED_NUM_LOCK_SCANCODE 255 diff --git a/keyboards/massdrop/alt/keymaps/default_md/keymap.c b/keyboards/massdrop/alt/keymaps/default_md/keymap.c index 810585a3df..5bd543ed63 100644 --- a/keyboards/massdrop/alt/keymaps/default_md/keymap.c +++ b/keyboards/massdrop/alt/keymaps/default_md/keymap.c @@ -3,10 +3,15 @@ enum alt_keycodes { L_BRI = SAFE_RANGE, //LED Brightness Increase //Working L_BRD, //LED Brightness Decrease //Working + L_EDG_I, //LED Edge Brightness Increase + L_EDG_D, //LED Edge Brightness Decrease + L_EDG_M, //LED Edge lighting mode L_PTN, //LED Pattern Select Next //Working L_PTP, //LED Pattern Select Previous //Working L_PSI, //LED Pattern Speed Increase //Working L_PSD, //LED Pattern Speed Decrease //Working + L_RATIOD, + L_RATIOI, L_T_MD, //LED Toggle Mode //Working L_T_ONF, //LED Toggle On / Off //Broken L_ON, //LED On //Broken @@ -18,6 +23,7 @@ enum alt_keycodes { DBG_MTRX, //DEBUG Toggle Matrix Prints // DBG_KBD, //DEBUG Toggle Keyboard Prints // DBG_MOU, //DEBUG Toggle Mouse Prints // + DBG_FAC, //DEBUG Factory light testing (All on white) MD_BOOT //Restart into bootloader after hold timeout //Working }; @@ -31,10 +37,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), [1] = LAYOUT( KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_MUTE, \ - L_T_BR, L_PSD, L_BRI, L_PSI, _______, _______, _______, _______, U_T_AGCR,_______, KC_PSCR, KC_SLCK, KC_PAUS, _______, KC_END, \ - L_T_PTD, L_PTP, L_BRD, L_PTN, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, \ - _______, L_T_MD, L_T_ONF, _______, _______, MD_BOOT, NK_TOGG, _______, _______, _______, _______, _______, KC_PGUP, KC_VOLD, \ - _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END \ + L_T_BR, L_PSD, L_BRI, L_PSI, L_EDG_I, _______, _______, _______, U_T_AGCR,_______, KC_PSCR, KC_SLCK, KC_PAUS, _______, KC_END, \ + L_T_PTD, L_PTP, L_BRD, L_PTN, L_EDG_D, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, \ + _______, L_T_MD, L_T_ONF, _______, L_EDG_M, MD_BOOT, NK_TOGG, _______, _______, _______, _______, _______, KC_PGUP, KC_VOLD, \ + _______, _______, _______, DBG_FAC, _______, _______, KC_HOME, KC_PGDN, KC_END \ ), /* [X] = LAYOUT( @@ -53,6 +59,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { bool process_record_user(uint16_t keycode, keyrecord_t *record) { static uint32_t key_timer; + static uint8_t scroll_effect = 0; switch (keycode) { case L_BRI: @@ -69,6 +76,38 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { if (led_animation_breathing) gcr_breathe = gcr_desired; } return false; + case L_EDG_M: + if (record->event.pressed) { + led_edge_mode++; + if (led_edge_mode > LED_EDGE_MODE_MAX) { + led_edge_mode = LED_EDGE_MODE_ALL; + } + } + return false; + case L_EDG_I: + if (record->event.pressed) { + led_edge_brightness += 0.1; + if (led_edge_brightness > 1) { led_edge_brightness = 1; } + } + return false; + case L_EDG_D: + if (record->event.pressed) { + led_edge_brightness -= 0.1; + if (led_edge_brightness < 0) { led_edge_brightness = 0; } + } + return false; + case L_RATIOI: + if (record->event.pressed) { + led_ratio_brightness += 0.2; + if (led_ratio_brightness > 2.0) { led_ratio_brightness = 2.0; } + } + return false; + case L_RATIOD: + if (record->event.pressed) { + led_ratio_brightness -= 0.2; + if (led_ratio_brightness < 0.0) { led_ratio_brightness = 0.0; } + } + return false; case L_PTN: if (record->event.pressed) { if (led_animation_id == led_setups_count - 1) led_animation_id = 0; @@ -128,7 +167,33 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { return false; case L_T_PTD: if (record->event.pressed) { - led_animation_direction = !led_animation_direction; + scroll_effect++; + if (scroll_effect == 1) { //Patterns with scroll move horizontal (Right to left) + led_animation_direction = 1; + led_animation_orientation = 0; + led_animation_circular = 0; + } else if (scroll_effect == 2) { //Patterns with scroll move vertical (Top to bottom) + led_animation_direction = 1; + led_animation_orientation = 1; + led_animation_circular = 0; + } else if (scroll_effect == 3) { //Patterns with scroll move vertical (Bottom to top) + led_animation_direction = 0; + led_animation_orientation = 1; + led_animation_circular = 0; + } else if (scroll_effect == 4) { //Patterns with scroll explode from center + led_animation_direction = 0; + led_animation_orientation = 0; + led_animation_circular = 1; + } else if (scroll_effect == 5) { //Patterns with scroll implode on center + led_animation_direction = 1; + led_animation_orientation = 0; + led_animation_circular = 1; + } else { //Patterns with scroll move horizontal (Left to right) + scroll_effect = 0; + led_animation_direction = 0; + led_animation_orientation = 0; + led_animation_circular = 0; + } } return false; case U_T_AGCR: @@ -136,6 +201,18 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { TOGGLE_FLAG_AND_PRINT(usb_gcr_auto, "USB GCR auto mode"); } return false; + case DBG_FAC: + if (record->event.pressed && MODS_SHIFT && MODS_CTRL) { + led_lighting_mode = LED_MODE_NORMAL; + led_edge_brightness = 1; + led_edge_mode = LED_EDGE_MODE_ALL; + led_animation_breathing = 0; + led_animation_id = 7; //led_programs.c led_setups leds_white index + gcr_desired = LED_GCR_MAX; + led_enabled = 1; + I2C3733_Control_Set(led_enabled); + } + return false; case DBG_TOG: if (record->event.pressed) { TOGGLE_FLAG_AND_PRINT(debug_enable, "Debug mode"); diff --git a/keyboards/massdrop/alt/keymaps/mac_md/keymap.c b/keyboards/massdrop/alt/keymaps/mac_md/keymap.c index b3626c1b61..bfcadf8900 100644 --- a/keyboards/massdrop/alt/keymaps/mac_md/keymap.c +++ b/keyboards/massdrop/alt/keymaps/mac_md/keymap.c @@ -3,10 +3,15 @@ enum alt_keycodes { L_BRI = SAFE_RANGE, //LED Brightness Increase //Working L_BRD, //LED Brightness Decrease //Working + L_EDG_I, //LED Edge Brightness Increase + L_EDG_D, //LED Edge Brightness Decrease + L_EDG_M, //LED Edge lighting mode L_PTN, //LED Pattern Select Next //Working L_PTP, //LED Pattern Select Previous //Working L_PSI, //LED Pattern Speed Increase //Working L_PSD, //LED Pattern Speed Decrease //Working + L_RATIOD, + L_RATIOI, L_T_MD, //LED Toggle Mode //Working L_T_ONF, //LED Toggle On / Off //Broken L_ON, //LED On //Broken @@ -18,6 +23,7 @@ enum alt_keycodes { DBG_MTRX, //DEBUG Toggle Matrix Prints // DBG_KBD, //DEBUG Toggle Keyboard Prints // DBG_MOU, //DEBUG Toggle Mouse Prints // + DBG_FAC, //DEBUG Factory light testing (All on white) MD_BOOT //Restart into bootloader after hold timeout //Working }; @@ -31,10 +37,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), [1] = LAYOUT( KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_MUTE, \ - L_T_BR, L_PSD, L_BRI, L_PSI, _______, _______, _______, _______, U_T_AGCR,_______, KC_PSCR, KC_SLCK, KC_PAUS, _______, KC_END, \ - L_T_PTD, L_PTP, L_BRD, L_PTN, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, \ - _______, L_T_MD, L_T_ONF, _______, _______, MD_BOOT, NK_TOGG, _______, _______, _______, _______, _______, KC_PGUP, KC_VOLD, \ - _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END \ + L_T_BR, L_PSD, L_BRI, L_PSI, L_EDG_I, _______, _______, _______, U_T_AGCR,_______, KC_PSCR, KC_SLCK, KC_PAUS, _______, KC_END, \ + L_T_PTD, L_PTP, L_BRD, L_PTN, L_EDG_D, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, \ + _______, L_T_MD, L_T_ONF, _______, L_EDG_M, MD_BOOT, NK_TOGG, _______, _______, _______, _______, _______, KC_PGUP, KC_VOLD, \ + _______, _______, _______, DBG_FAC, _______, _______, KC_HOME, KC_PGDN, KC_END \ ), /* [X] = LAYOUT( @@ -53,6 +59,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { bool process_record_user(uint16_t keycode, keyrecord_t *record) { static uint32_t key_timer; + static uint8_t scroll_effect = 0; switch (keycode) { case L_BRI: @@ -69,6 +76,38 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { if (led_animation_breathing) gcr_breathe = gcr_desired; } return false; + case L_EDG_M: + if (record->event.pressed) { + led_edge_mode++; + if (led_edge_mode > LED_EDGE_MODE_MAX) { + led_edge_mode = LED_EDGE_MODE_ALL; + } + } + return false; + case L_EDG_I: + if (record->event.pressed) { + led_edge_brightness += 0.1; + if (led_edge_brightness > 1) { led_edge_brightness = 1; } + } + return false; + case L_EDG_D: + if (record->event.pressed) { + led_edge_brightness -= 0.1; + if (led_edge_brightness < 0) { led_edge_brightness = 0; } + } + return false; + case L_RATIOI: + if (record->event.pressed) { + led_ratio_brightness += 0.2; + if (led_ratio_brightness > 2.0) { led_ratio_brightness = 2.0; } + } + return false; + case L_RATIOD: + if (record->event.pressed) { + led_ratio_brightness -= 0.2; + if (led_ratio_brightness < 0.0) { led_ratio_brightness = 0.0; } + } + return false; case L_PTN: if (record->event.pressed) { if (led_animation_id == led_setups_count - 1) led_animation_id = 0; @@ -128,7 +167,33 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { return false; case L_T_PTD: if (record->event.pressed) { - led_animation_direction = !led_animation_direction; + scroll_effect++; + if (scroll_effect == 1) { //Patterns with scroll move horizontal (Right to left) + led_animation_direction = 1; + led_animation_orientation = 0; + led_animation_circular = 0; + } else if (scroll_effect == 2) { //Patterns with scroll move vertical (Top to bottom) + led_animation_direction = 1; + led_animation_orientation = 1; + led_animation_circular = 0; + } else if (scroll_effect == 3) { //Patterns with scroll move vertical (Bottom to top) + led_animation_direction = 0; + led_animation_orientation = 1; + led_animation_circular = 0; + } else if (scroll_effect == 4) { //Patterns with scroll explode from center + led_animation_direction = 0; + led_animation_orientation = 0; + led_animation_circular = 1; + } else if (scroll_effect == 5) { //Patterns with scroll implode on center + led_animation_direction = 1; + led_animation_orientation = 0; + led_animation_circular = 1; + } else { //Patterns with scroll move horizontal (Left to right) + scroll_effect = 0; + led_animation_direction = 0; + led_animation_orientation = 0; + led_animation_circular = 0; + } } return false; case U_T_AGCR: @@ -136,6 +201,18 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { TOGGLE_FLAG_AND_PRINT(usb_gcr_auto, "USB GCR auto mode"); } return false; + case DBG_FAC: + if (record->event.pressed && MODS_SHIFT && MODS_CTRL) { + led_lighting_mode = LED_MODE_NORMAL; + led_edge_brightness = 1; + led_edge_mode = LED_EDGE_MODE_ALL; + led_animation_breathing = 0; + led_animation_id = 7; //led_programs.c led_setups leds_white index + gcr_desired = LED_GCR_MAX; + led_enabled = 1; + I2C3733_Control_Set(led_enabled); + } + return false; case DBG_TOG: if (record->event.pressed) { TOGGLE_FLAG_AND_PRINT(debug_enable, "Debug mode"); diff --git a/keyboards/massdrop/ctrl/config_led.h b/keyboards/massdrop/ctrl/config_led.h index 0c91a0c80b..de897ce1bd 100644 --- a/keyboards/massdrop/ctrl/config_led.h +++ b/keyboards/massdrop/ctrl/config_led.h @@ -58,7 +58,7 @@ along with this program. If not, see . //swr: Matrix wiring SW Red row (1-12) //swg: Matrix wiring SW Green row (1-12) //swb: Matrix wiring SW Blue row (1-12) -//scan: Associated key scancode if any +//scan: Associated key matrix scancode (set 255 if none or 254 for LED to turn off in alternating mode) //Note: Origin 0,0 may be located anywhere as the software will do the final layout #define ISSI3733_LED_MAP { \ { .id = 1, .x = 0, .y = 0, .adr = { .drv = 2, .cs = 2, .swr = 2, .swg = 1, .swb = 3 }, .scan = 0 }, \ @@ -149,37 +149,37 @@ along with this program. If not, see . { .id = 86, .x = 12.375, .y = -4.125, .adr = { .drv = 1, .cs = 12, .swr = 5, .swg = 4, .swb = 6 }, .scan = 85 }, \ { .id = 87, .x = 13.125, .y = -4.125, .adr = { .drv = 1, .cs = 11, .swr = 5, .swg = 4, .swb = 6 }, .scan = 86 }, \ { .id = 88, .x = 13.433, .y = -4.43, .adr = { .drv = 1, .cs = 11, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ - { .id = 89, .x = 12.285, .y = -4.535, .adr = { .drv = 1, .cs = 12, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 89, .x = 12.285, .y = -4.535, .adr = { .drv = 1, .cs = 12, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \ { .id = 90, .x = 11.14, .y = -4.535, .adr = { .drv = 1, .cs = 13, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ - { .id = 91, .x = 9.995, .y = -4.535, .adr = { .drv = 1, .cs = 14, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 91, .x = 9.995, .y = -4.535, .adr = { .drv = 1, .cs = 14, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \ { .id = 92, .x = 8.85, .y = -4.535, .adr = { .drv = 1, .cs = 15, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ - { .id = 93, .x = 7.705, .y = -4.535, .adr = { .drv = 1, .cs = 16, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 93, .x = 7.705, .y = -4.535, .adr = { .drv = 1, .cs = 16, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \ { .id = 94, .x = 6.56, .y = -4.535, .adr = { .drv = 2, .cs = 9, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ - { .id = 95, .x = 5.415, .y = -4.535, .adr = { .drv = 2, .cs = 10, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 95, .x = 5.415, .y = -4.535, .adr = { .drv = 2, .cs = 10, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \ { .id = 96, .x = 4.27, .y = -4.535, .adr = { .drv = 2, .cs = 11, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ - { .id = 97, .x = 3.125, .y = -4.535, .adr = { .drv = 2, .cs = 12, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 97, .x = 3.125, .y = -4.535, .adr = { .drv = 2, .cs = 12, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \ { .id = 98, .x = 1.98, .y = -4.535, .adr = { .drv = 2, .cs = 13, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ - { .id = 99, .x = 0.835, .y = -4.535, .adr = { .drv = 2, .cs = 14, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 99, .x = 0.835, .y = -4.535, .adr = { .drv = 2, .cs = 14, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \ { .id = 100, .x = -0.307, .y = -4.43, .adr = { .drv = 2, .cs = 15, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ - { .id = 101, .x = -0.41, .y = -3.245, .adr = { .drv = 2, .cs = 15, .swr = 11, .swg = 10, .swb = 12 }, .scan = 255 }, \ + { .id = 101, .x = -0.41, .y = -3.245, .adr = { .drv = 2, .cs = 15, .swr = 11, .swg = 10, .swb = 12 }, .scan = 254 }, \ { .id = 102, .x = -0.41, .y = -2.06, .adr = { .drv = 2, .cs = 15, .swr = 5, .swg = 4, .swb = 6 }, .scan = 255 }, \ - { .id = 103, .x = -0.41, .y = -0.875, .adr = { .drv = 2, .cs = 15, .swr = 8, .swg = 7, .swb = 9 }, .scan = 255 }, \ + { .id = 103, .x = -0.41, .y = -0.875, .adr = { .drv = 2, .cs = 15, .swr = 8, .swg = 7, .swb = 9 }, .scan = 254 }, \ { .id = 104, .x = -0.308, .y = 0.31, .adr = { .drv = 2, .cs = 1, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ - { .id = 105, .x = 0.835, .y = 0.415, .adr = { .drv = 2, .cs = 3, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 105, .x = 0.835, .y = 0.415, .adr = { .drv = 2, .cs = 3, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \ { .id = 106, .x = 1.98, .y = 0.415, .adr = { .drv = 2, .cs = 4, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ - { .id = 107, .x = 3.125, .y = 0.415, .adr = { .drv = 2, .cs = 5, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 107, .x = 3.125, .y = 0.415, .adr = { .drv = 2, .cs = 5, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \ { .id = 108, .x = 4.27, .y = 0.415, .adr = { .drv = 2, .cs = 7, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ - { .id = 109, .x = 5.415, .y = 0.415, .adr = { .drv = 2, .cs = 8, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 109, .x = 5.415, .y = 0.415, .adr = { .drv = 2, .cs = 8, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \ { .id = 110, .x = 6.56, .y = 0.415, .adr = { .drv = 1, .cs = 1, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ - { .id = 111, .x = 7.705, .y = 0.415, .adr = { .drv = 1, .cs = 2, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 111, .x = 7.705, .y = 0.415, .adr = { .drv = 1, .cs = 2, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \ { .id = 112, .x = 8.85, .y = 0.415, .adr = { .drv = 1, .cs = 3, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ - { .id = 113, .x = 9.995, .y = 0.415, .adr = { .drv = 1, .cs = 5, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 113, .x = 9.995, .y = 0.415, .adr = { .drv = 1, .cs = 5, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \ { .id = 114, .x = 11.14, .y = 0.415, .adr = { .drv = 1, .cs = 6, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ - { .id = 115, .x = 12.285, .y = 0.415, .adr = { .drv = 1, .cs = 8, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ + { .id = 115, .x = 12.285, .y = 0.415, .adr = { .drv = 1, .cs = 8, .swr = 2, .swg = 1, .swb = 3 }, .scan = 254 }, \ { .id = 116, .x = 13.432, .y = 0.31, .adr = { .drv = 1, .cs = 10, .swr = 2, .swg = 1, .swb = 3 }, .scan = 255 }, \ - { .id = 117, .x = 13.535, .y = -0.875, .adr = { .drv = 1, .cs = 10, .swr = 8, .swg = 7, .swb = 9 }, .scan = 255 }, \ + { .id = 117, .x = 13.535, .y = -0.875, .adr = { .drv = 1, .cs = 10, .swr = 8, .swg = 7, .swb = 9 }, .scan = 254 }, \ { .id = 118, .x = 13.535, .y = -2.06, .adr = { .drv = 1, .cs = 10, .swr = 11, .swg = 10, .swb = 12 }, .scan = 255 }, \ - { .id = 119, .x = 13.535, .y = -3.245, .adr = { .drv = 1, .cs = 10, .swr = 5, .swg = 4, .swb = 6 }, .scan = 255 }, \ + { .id = 119, .x = 13.535, .y = -3.245, .adr = { .drv = 1, .cs = 10, .swr = 5, .swg = 4, .swb = 6 }, .scan = 254 }, \ }; #define USB_LED_INDICATOR_ENABLE //Comment out to disable indicator functionality diff --git a/keyboards/massdrop/ctrl/keymaps/default_md/keymap.c b/keyboards/massdrop/ctrl/keymaps/default_md/keymap.c index 1083571ef9..cf4eea646d 100644 --- a/keyboards/massdrop/ctrl/keymaps/default_md/keymap.c +++ b/keyboards/massdrop/ctrl/keymaps/default_md/keymap.c @@ -3,10 +3,15 @@ enum ctrl_keycodes { L_BRI = SAFE_RANGE, //LED Brightness Increase //Working L_BRD, //LED Brightness Decrease //Working + L_EDG_I, //LED Edge Brightness Increase + L_EDG_D, //LED Edge Brightness Decrease + L_EDG_M, //LED Edge lighting mode L_PTN, //LED Pattern Select Next //Working L_PTP, //LED Pattern Select Previous //Working L_PSI, //LED Pattern Speed Increase //Working L_PSD, //LED Pattern Speed Decrease //Working + L_RATIOD, + L_RATIOI, L_T_MD, //LED Toggle Mode //Working L_T_ONF, //LED Toggle On / Off //Broken L_ON, //LED On //Broken @@ -18,6 +23,7 @@ enum ctrl_keycodes { DBG_MTRX, //DEBUG Toggle Matrix Prints // DBG_KBD, //DEBUG Toggle Keyboard Prints // DBG_MOU, //DEBUG Toggle Mouse Prints // + DBG_FAC, //DEBUG Factory light testing (All on white) MD_BOOT //Restart into bootloader after hold timeout //Working }; @@ -33,10 +39,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [1] = LAYOUT( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, _______, _______, \ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, KC_MSTP, KC_VOLU, \ - L_T_BR, L_PSD, L_BRI, L_PSI, _______, _______, _______, _______, U_T_AGCR,_______, _______, _______, _______, _______, KC_MPRV, KC_MNXT, KC_VOLD, \ - L_T_PTD, L_PTP, L_BRD, L_PTN, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, L_T_MD, L_T_ONF, _______, _______, MD_BOOT, NK_TOGG, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + L_T_BR, L_PSD, L_BRI, L_PSI, L_EDG_I, _______, _______, _______, U_T_AGCR,_______, _______, _______, _______, _______, KC_MPRV, KC_MNXT, KC_VOLD, \ + L_T_PTD, L_PTP, L_BRD, L_PTN, L_EDG_D, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, L_T_MD, L_T_ONF, _______, L_EDG_M, MD_BOOT, NK_TOGG, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, DBG_FAC, _______, _______, _______, _______, _______, _______, _______ \ ), /* [X] = LAYOUT( @@ -56,6 +62,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { bool process_record_user(uint16_t keycode, keyrecord_t *record) { static uint32_t key_timer; + static uint8_t scroll_effect = 0; switch (keycode) { case L_BRI: @@ -72,6 +79,38 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { if (led_animation_breathing) gcr_breathe = gcr_desired; } return false; + case L_EDG_M: + if (record->event.pressed) { + led_edge_mode++; + if (led_edge_mode > LED_EDGE_MODE_MAX) { + led_edge_mode = LED_EDGE_MODE_ALL; + } + } + return false; + case L_EDG_I: + if (record->event.pressed) { + led_edge_brightness += 0.1; + if (led_edge_brightness > 1) { led_edge_brightness = 1; } + } + return false; + case L_EDG_D: + if (record->event.pressed) { + led_edge_brightness -= 0.1; + if (led_edge_brightness < 0) { led_edge_brightness = 0; } + } + return false; + case L_RATIOI: + if (record->event.pressed) { + led_ratio_brightness += 0.2; + if (led_ratio_brightness > 2.0) { led_ratio_brightness = 2.0; } + } + return false; + case L_RATIOD: + if (record->event.pressed) { + led_ratio_brightness -= 0.2; + if (led_ratio_brightness < 0.0) { led_ratio_brightness = 0.0; } + } + return false; case L_PTN: if (record->event.pressed) { if (led_animation_id == led_setups_count - 1) led_animation_id = 0; @@ -131,7 +170,33 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { return false; case L_T_PTD: if (record->event.pressed) { - led_animation_direction = !led_animation_direction; + scroll_effect++; + if (scroll_effect == 1) { //Patterns with scroll move horizontal (Right to left) + led_animation_direction = 1; + led_animation_orientation = 0; + led_animation_circular = 0; + } else if (scroll_effect == 2) { //Patterns with scroll move vertical (Top to bottom) + led_animation_direction = 1; + led_animation_orientation = 1; + led_animation_circular = 0; + } else if (scroll_effect == 3) { //Patterns with scroll move vertical (Bottom to top) + led_animation_direction = 0; + led_animation_orientation = 1; + led_animation_circular = 0; + } else if (scroll_effect == 4) { //Patterns with scroll explode from center + led_animation_direction = 0; + led_animation_orientation = 0; + led_animation_circular = 1; + } else if (scroll_effect == 5) { //Patterns with scroll implode on center + led_animation_direction = 1; + led_animation_orientation = 0; + led_animation_circular = 1; + } else { //Patterns with scroll move horizontal (Left to right) + scroll_effect = 0; + led_animation_direction = 0; + led_animation_orientation = 0; + led_animation_circular = 0; + } } return false; case U_T_AGCR: @@ -139,6 +204,18 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { TOGGLE_FLAG_AND_PRINT(usb_gcr_auto, "USB GCR auto mode"); } return false; + case DBG_FAC: + if (record->event.pressed && MODS_SHIFT && MODS_CTRL) { + led_lighting_mode = LED_MODE_NORMAL; + led_edge_brightness = 1; + led_edge_mode = LED_EDGE_MODE_ALL; + led_animation_breathing = 0; + led_animation_id = 7; //led_programs.c led_setups leds_white index + gcr_desired = LED_GCR_MAX; + led_enabled = 1; + I2C3733_Control_Set(led_enabled); + } + return false; case DBG_TOG: if (record->event.pressed) { TOGGLE_FLAG_AND_PRINT(debug_enable, "Debug mode"); @@ -179,7 +256,7 @@ led_instruction_t led_instructions[] = { //Flags can be found in tmk_core/protocol/arm_atsam/md_rgb_matrix.h (prefixed with LED_FLAG_) //LED IDs can be found in config_led.h in the keyboard's directory //Examples are below - + //All LEDs use the user's selected pattern (this is the factory default) { .flags = LED_FLAG_USE_ROTATE_PATTERN }, @@ -188,7 +265,7 @@ led_instruction_t led_instructions[] = { //Specific LEDs use specified RGB values while all others are off // { .flags = LED_FLAG_MATCH_ID | LED_FLAG_USE_RGB, .id0 = 0xFF, .id1 = 0x00FF, .id2 = 0x0000FF00, .id3 = 0xFF000000, .r = 75, .g = 150, .b = 225 }, - + //All LEDs use the user's selected pattern //On layer 1, all key LEDs (except the top row which keeps active pattern) are red while all edge LEDs are green //When layer 1 is active, key LEDs use red (id0 32 - 17: 1111 1111 1111 1111 0000 0000 0000 0000 = 0xFFFF0000) (except top row 16 - 1) diff --git a/keyboards/massdrop/ctrl/keymaps/mac_md/keymap.c b/keyboards/massdrop/ctrl/keymaps/mac_md/keymap.c index ba02d5e506..4a85b375b3 100644 --- a/keyboards/massdrop/ctrl/keymaps/mac_md/keymap.c +++ b/keyboards/massdrop/ctrl/keymaps/mac_md/keymap.c @@ -3,10 +3,15 @@ enum ctrl_keycodes { L_BRI = SAFE_RANGE, //LED Brightness Increase //Working L_BRD, //LED Brightness Decrease //Working + L_EDG_I, //LED Edge Brightness Increase + L_EDG_D, //LED Edge Brightness Decrease + L_EDG_M, //LED Edge lighting mode L_PTN, //LED Pattern Select Next //Working L_PTP, //LED Pattern Select Previous //Working L_PSI, //LED Pattern Speed Increase //Working L_PSD, //LED Pattern Speed Decrease //Working + L_RATIOD, + L_RATIOI, L_T_MD, //LED Toggle Mode //Working L_T_ONF, //LED Toggle On / Off //Broken L_ON, //LED On //Broken @@ -18,6 +23,7 @@ enum ctrl_keycodes { DBG_MTRX, //DEBUG Toggle Matrix Prints // DBG_KBD, //DEBUG Toggle Keyboard Prints // DBG_MOU, //DEBUG Toggle Mouse Prints // + DBG_FAC, //DEBUG Factory light testing (All on white) MD_BOOT //Restart into bootloader after hold timeout //Working }; @@ -33,10 +39,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [1] = LAYOUT( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, _______, _______, \ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, KC_MSTP, KC_VOLU, \ - L_T_BR, L_PSD, L_BRI, L_PSI, _______, _______, _______, _______, U_T_AGCR,_______, _______, _______, _______, _______, KC_MPRV, KC_MNXT, KC_VOLD, \ - L_T_PTD, L_PTP, L_BRD, L_PTN, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ - _______, L_T_MD, L_T_ONF, _______, _______, MD_BOOT, NK_TOGG, _______, _______, _______, _______, _______, _______, \ - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + L_T_BR, L_PSD, L_BRI, L_PSI, L_EDG_I, _______, _______, _______, U_T_AGCR,_______, _______, _______, _______, _______, KC_MPRV, KC_MNXT, KC_VOLD, \ + L_T_PTD, L_PTP, L_BRD, L_PTN, L_EDG_D, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, L_T_MD, L_T_ONF, _______, L_EDG_M, MD_BOOT, NK_TOGG, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, DBG_FAC, _______, _______, _______, _______, _______, _______, _______ \ ), /* [X] = LAYOUT( @@ -64,6 +70,7 @@ void matrix_scan_user(void) { bool process_record_user(uint16_t keycode, keyrecord_t *record) { static uint32_t key_timer; + static uint8_t scroll_effect = 0; switch (keycode) { case L_BRI: @@ -80,6 +87,38 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { if (led_animation_breathing) gcr_breathe = gcr_desired; } return false; + case L_EDG_M: + if (record->event.pressed) { + led_edge_mode++; + if (led_edge_mode > LED_EDGE_MODE_MAX) { + led_edge_mode = LED_EDGE_MODE_ALL; + } + } + return false; + case L_EDG_I: + if (record->event.pressed) { + led_edge_brightness += 0.1; + if (led_edge_brightness > 1) { led_edge_brightness = 1; } + } + return false; + case L_EDG_D: + if (record->event.pressed) { + led_edge_brightness -= 0.1; + if (led_edge_brightness < 0) { led_edge_brightness = 0; } + } + return false; + case L_RATIOI: + if (record->event.pressed) { + led_ratio_brightness += 0.2; + if (led_ratio_brightness > 2.0) { led_ratio_brightness = 2.0; } + } + return false; + case L_RATIOD: + if (record->event.pressed) { + led_ratio_brightness -= 0.2; + if (led_ratio_brightness < 0.0) { led_ratio_brightness = 0.0; } + } + return false; case L_PTN: if (record->event.pressed) { if (led_animation_id == led_setups_count - 1) led_animation_id = 0; @@ -139,7 +178,33 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { return false; case L_T_PTD: if (record->event.pressed) { - led_animation_direction = !led_animation_direction; + scroll_effect++; + if (scroll_effect == 1) { //Patterns with scroll move horizontal (Right to left) + led_animation_direction = 1; + led_animation_orientation = 0; + led_animation_circular = 0; + } else if (scroll_effect == 2) { //Patterns with scroll move vertical (Top to bottom) + led_animation_direction = 1; + led_animation_orientation = 1; + led_animation_circular = 0; + } else if (scroll_effect == 3) { //Patterns with scroll move vertical (Bottom to top) + led_animation_direction = 0; + led_animation_orientation = 1; + led_animation_circular = 0; + } else if (scroll_effect == 4) { //Patterns with scroll explode from center + led_animation_direction = 0; + led_animation_orientation = 0; + led_animation_circular = 1; + } else if (scroll_effect == 5) { //Patterns with scroll implode on center + led_animation_direction = 1; + led_animation_orientation = 0; + led_animation_circular = 1; + } else { //Patterns with scroll move horizontal (Left to right) + scroll_effect = 0; + led_animation_direction = 0; + led_animation_orientation = 0; + led_animation_circular = 0; + } } return false; case U_T_AGCR: @@ -147,6 +212,18 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { TOGGLE_FLAG_AND_PRINT(usb_gcr_auto, "USB GCR auto mode"); } return false; + case DBG_FAC: + if (record->event.pressed && MODS_SHIFT && MODS_CTRL) { + led_lighting_mode = LED_MODE_NORMAL; + led_edge_brightness = 1; + led_edge_mode = LED_EDGE_MODE_ALL; + led_animation_breathing = 0; + led_animation_id = 7; //led_programs.c led_setups leds_white index + gcr_desired = LED_GCR_MAX; + led_enabled = 1; + I2C3733_Control_Set(led_enabled); + } + return false; case DBG_TOG: if (record->event.pressed) { TOGGLE_FLAG_AND_PRINT(debug_enable, "Debug mode"); diff --git a/tmk_core/protocol/arm_atsam/md_rgb_matrix.c b/tmk_core/protocol/arm_atsam/md_rgb_matrix.c index 98967aac88..43d9f2ee60 100644 --- a/tmk_core/protocol/arm_atsam/md_rgb_matrix.c +++ b/tmk_core/protocol/arm_atsam/md_rgb_matrix.c @@ -341,6 +341,10 @@ uint8_t led_lighting_mode = LED_MODE_NORMAL; uint8_t led_enabled = 1; uint8_t led_animation_breathe_cur = BREATHE_MIN_STEP; uint8_t breathe_dir = 1; +uint8_t led_animation_circular = 0; +float led_edge_brightness = 1.0f; +float led_ratio_brightness = 1.0f; +uint8_t led_edge_mode = LED_EDGE_MODE_ALL; static void led_run_pattern(led_setup_t* f, float* ro, float* go, float* bo, float pos) { float po; @@ -398,16 +402,32 @@ static void led_run_pattern(led_setup_t* f, float* ro, float* go, float* bo, flo } } +# define RGB_MAX_DISTANCE 232.9635f + static void md_rgb_matrix_config_override(int i) { float ro = 0; float go = 0; float bo = 0; - - float po = (led_animation_orientation) ? (float)g_led_config.point[i].y / 64.f * 100 : (float)g_led_config.point[i].x / 224.f * 100; + float po; uint8_t highest_active_layer = biton32(layer_state); - if (led_lighting_mode == LED_MODE_KEYS_ONLY && HAS_FLAGS(g_led_config.flags[i], LED_FLAG_UNDERGLOW)) { + if (led_animation_circular) { + // TODO: should use min/max values from LED configuration instead of + // hard-coded 224, 64 + // po = sqrtf((powf(fabsf((disp.width / 2) - (led_cur->x - disp.left)), 2) + powf(fabsf((disp.height / 2) - (led_cur->y - disp.bottom)), 2))) / disp.max_distance * 100; + po = sqrtf((powf(fabsf((224 / 2) - (float)g_led_config.point[i].x), 2) + powf(fabsf((64 / 2) - (float)g_led_config.point[i].y), 2))) / RGB_MAX_DISTANCE * 100; + } else { + if (led_animation_orientation) { + po = (float)g_led_config.point[i].y / 64.f * 100; + } else { + po = (float)g_led_config.point[i].x / 224.f * 100; + } + } + + if (led_edge_mode == LED_EDGE_MODE_ALTERNATE && LED_IS_EDGE_ALT(led_map[i].scan)) { + // Do not act on this LED (Edge alternate lighting mode) + } else if (led_lighting_mode == LED_MODE_KEYS_ONLY && HAS_FLAGS(g_led_config.flags[i], LED_FLAG_UNDERGLOW)) { // Do not act on this LED } else if (led_lighting_mode == LED_MODE_NON_KEYS_ONLY && !HAS_FLAGS(g_led_config.flags[i], LED_FLAG_UNDERGLOW)) { // Do not act on this LED @@ -465,10 +485,30 @@ static void md_rgb_matrix_config_override(int i) { } } + // Adjust edge LED brightness + if (led_edge_brightness != 1 && LED_IS_EDGE(led_map[i].scan)) { + ro *= led_edge_brightness; + go *= led_edge_brightness; + bo *= led_edge_brightness; + } + + // Adjust ratio of key vs. underglow (edge) LED brightness + if (LED_IS_EDGE(led_map[i].scan) && led_ratio_brightness > 1.0) { + // Decrease edge (underglow) LEDs + ro *= (2.0 - led_ratio_brightness); + go *= (2.0 - led_ratio_brightness); + bo *= (2.0 - led_ratio_brightness); + } else if (LED_IS_KEY(led_map[i].scan) && led_ratio_brightness < 1.0) { + // Decrease KEY LEDs + ro *= led_ratio_brightness; + go *= led_ratio_brightness; + bo *= led_ratio_brightness; + } + led_buffer[i].r = (uint8_t)ro; led_buffer[i].g = (uint8_t)go; led_buffer[i].b = (uint8_t)bo; } # endif // USE_MASSDROP_CONFIGURATOR -#endif // RGB_MATRIX_ENABLE \ No newline at end of file +#endif // RGB_MATRIX_ENABLE diff --git a/tmk_core/protocol/arm_atsam/md_rgb_matrix.h b/tmk_core/protocol/arm_atsam/md_rgb_matrix.h index 76ccaa678b..f72dca2985 100644 --- a/tmk_core/protocol/arm_atsam/md_rgb_matrix.h +++ b/tmk_core/protocol/arm_atsam/md_rgb_matrix.h @@ -128,6 +128,8 @@ typedef struct led_instruction_s { uint32_t id1; // Bitwise id, IDs 32-63 uint32_t id2; // Bitwise id, IDs 64-95 uint32_t id3; // Bitwise id, IDs 96-127 + uint32_t id4; // Bitwise id, IDs 128-159 + uint32_t id5; // Bitwise id, IDs 160-191 uint8_t layer; uint8_t r; uint8_t g; @@ -146,6 +148,11 @@ extern uint8_t led_enabled; extern uint8_t led_animation_breathe_cur; extern uint8_t led_animation_direction; extern uint8_t breathe_dir; +extern uint8_t led_animation_orientation; +extern uint8_t led_animation_circular; +extern float led_edge_brightness; +extern float led_ratio_brightness; +extern uint8_t led_edge_mode; # define LED_MODE_NORMAL 0 // Must be 0 # define LED_MODE_KEYS_ONLY 1 @@ -153,6 +160,20 @@ extern uint8_t breathe_dir; # define LED_MODE_INDICATORS_ONLY 3 # define LED_MODE_MAX_INDEX LED_MODE_INDICATORS_ONLY // Must be highest value +# define LED_EDGE_MODE_ALL 0 // All edge LEDs are active (Must be 0) +# define LED_EDGE_MODE_ALTERNATE 1 // Alternate mode of edge LEDs are active (Intention is for 'only every other edge LED' to be active) +# define LED_EDGE_MODE_MAX LED_EDGE_MODE_ALTERNATE // Must be the highest valued LED edge mode + +# define LED_EDGE_FULL_MODE 255 // LEDs configured with this scan code will always be on for edge lighting modes +# define LED_EDGE_ALT_MODE 254 // LEDs configured with this scan code will turn off in edge alternating mode +# define LED_EDGE_MIN_SCAN 254 // LEDs configured with scan code >= to this are assigned as edge LEDs +# define LED_INDICATOR_SCAN 253 // LEDs configured as dedicated indicators + +# define LED_IS_KEY(scan) (scan < LED_INDICATOR_SCAN) // Return true if an LED's scan value indicates it is a key LED +# define LED_IS_EDGE(scan) (scan >= LED_EDGE_MIN_SCAN) // Return true if an LED's scan value indicates an edge LED +# define LED_IS_EDGE_ALT(scan) (scan == LED_EDGE_ALT_MODE) // Return true if an LED's scan value indicates an alternate edge mode LED +# define LED_IS_INDICATOR(scan) (scan == LED_INDICATOR_SCAN) // Return true if an LED's scan value indicates it is a dedicated Indicator + #endif // USE_MASSDROP_CONFIGURATOR #endif //_LED_MATRIX_H_ From 70e396e8829dcdae363481af0acbd9f26a5982b1 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Fri, 29 Oct 2021 16:25:17 -0700 Subject: [PATCH 369/595] [Keyboard] Fix Compile issues for lefty (#14982) --- keyboards/lefty/keymaps/default/keymap.c | 31 ++++++++++++------------ keyboards/lefty/keymaps/via/keymap.c | 30 +++++++++++------------ keyboards/lefty/rev1/rules.mk | 0 keyboards/lefty/rev2/rules.mk | 0 4 files changed, 30 insertions(+), 31 deletions(-) create mode 100644 keyboards/lefty/rev1/rules.mk create mode 100644 keyboards/lefty/rev2/rules.mk diff --git a/keyboards/lefty/keymaps/default/keymap.c b/keyboards/lefty/keymaps/default/keymap.c index 0e1f56c036..ecedbac390 100644 --- a/keyboards/lefty/keymaps/default/keymap.c +++ b/keyboards/lefty/keymaps/default/keymap.c @@ -39,27 +39,26 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), [_LOWER] = LAYOUT_all( - ____, ____, ____, ____, ____, ____, ____, ____, - ____, ____, ____, ____, ____, ____, ____, - ____, ____, ____, ____, ____, ____, ____, - ____, ____, ____, ____, ____, ____, - ____, ____, ____, ____ + _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______ ), [_RAISE] = LAYOUT_all( - ____, ____, ____, ____, ____, ____, ____, ____, - ____, ____, ____, ____, ____, ____, ____, - ____, ____, ____, ____, ____, ____, ____, - ____, ____, ____, ____, ____, ____, - ____, ____, ____, ____ + _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______ ), [_SPECIAL] = LAYOUT_all( - ____, ____, ____, ____, ____, ____, ____, ____, - ____, ____, ____, ____, ____, ____, ____, - ____, ____, ____, ____, ____, ____, ____, - ____, ____, ____, ____, ____, ____, - ____, ____, ____, ____ + _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______ ) }; - diff --git a/keyboards/lefty/keymaps/via/keymap.c b/keyboards/lefty/keymaps/via/keymap.c index 764aa80c82..5acf16c044 100644 --- a/keyboards/lefty/keymaps/via/keymap.c +++ b/keyboards/lefty/keymaps/via/keymap.c @@ -40,26 +40,26 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), [_LOWER] = LAYOUT_all( - ____, ____, ____, ____, ____, ____, ____, ____, - ____, ____, ____, ____, ____, ____, ____, - ____, ____, ____, ____, ____, ____, ____, - ____, ____, ____, ____, ____, ____, - ____, ____, ____, ____ + _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______ ), [_RAISE] = LAYOUT_all( - ____, ____, ____, ____, ____, ____, ____, ____, - ____, ____, ____, ____, ____, ____, ____, - ____, ____, ____, ____, ____, ____, ____, - ____, ____, ____, ____, ____, ____, - ____, ____, ____, ____ + _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______ ), [_SPECIAL] = LAYOUT_all( - ____, ____, ____, ____, ____, ____, ____, ____, - ____, ____, ____, ____, ____, ____, ____, - ____, ____, ____, ____, ____, ____, ____, - ____, ____, ____, ____, ____, ____, - ____, ____, ____, ____ + _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______ ) }; diff --git a/keyboards/lefty/rev1/rules.mk b/keyboards/lefty/rev1/rules.mk new file mode 100644 index 0000000000..e69de29bb2 diff --git a/keyboards/lefty/rev2/rules.mk b/keyboards/lefty/rev2/rules.mk new file mode 100644 index 0000000000..e69de29bb2 From 28120c1a63bbc64649765d9214b14e63709933aa Mon Sep 17 00:00:00 2001 From: Alan Pocklington Date: Sat, 30 Oct 2021 00:30:23 +0100 Subject: [PATCH 370/595] [Keymap] ajp10304: add mouse scroll keys (#14953) --- keyboards/acheron/shark/keymaps/ajp10304/readme.md | 5 ++--- keyboards/handwired/atreus50/keymaps/ajp10304/keymap.c | 10 +++++----- .../handwired/atreus50/keymaps/ajp10304/readme.md | 5 ++--- keyboards/kprepublic/jj40/keymaps/ajp10304/readme.md | 6 ++---- keyboards/planck/keymaps/ajp10304/readme.md | 6 ++---- keyboards/quark/keymaps/ajp10304/readme.md | 5 ++--- layouts/community/ortho_4x12/ajp10304/keymap.c | 10 +++++----- layouts/community/ortho_4x12/ajp10304/readme.md | 2 +- users/ajp10304/readme.md | 4 ++-- 9 files changed, 23 insertions(+), 30 deletions(-) diff --git a/keyboards/acheron/shark/keymaps/ajp10304/readme.md b/keyboards/acheron/shark/keymaps/ajp10304/readme.md index c172321624..cb8bcdae90 100644 --- a/keyboards/acheron/shark/keymaps/ajp10304/readme.md +++ b/keyboards/acheron/shark/keymaps/ajp10304/readme.md @@ -7,8 +7,7 @@ the second is the output when shift is applied. **Note:** The below tables assume a UK layout. #### Flashing - -`make acheron/shark:ajp10304:flash` +Refer to the README.md of the keyboard you want to flash. ##### Main Qwerty Layer @@ -102,7 +101,7 @@ Activated when `fn` and `raise` held together. | | | | | | | | | | | | | | :---: | :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| -| ESC | | | | | | | | BTN3 | | | | +| ESC | | | | | | W_L | W_UP | BTN3 | W_DWN| W_R | | | ACC0 | ACC1 | ACC2 | | | | | BTN1 | UP | BTN2 | | | | ACC0 | ACC1 | ACC2 | | | | | LEFT | DOWN | RIGHT| | | | | | | | | | | | | | | | diff --git a/keyboards/handwired/atreus50/keymaps/ajp10304/keymap.c b/keyboards/handwired/atreus50/keymaps/ajp10304/keymap.c index 2b0616ad7e..0122455167 100644 --- a/keyboards/handwired/atreus50/keymaps/ajp10304/keymap.c +++ b/keyboards/handwired/atreus50/keymaps/ajp10304/keymap.c @@ -112,7 +112,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Mouse * ,------------------------------------------ |-----------------------------------------. - * | ESC | | | | | | | | | BTN3 | | | | + * | ESC | | | | | | | WH_L | WH_UP| BTN3 | WH_D | WH_R | | * |------+------+------+------+------+------- |------+------+------+------+------+------| * | ACC0 | ACC1 | ACC2 | | | | | | BTN1 | UP | BTN2 | | | * |------+------+------+------+------+------| |------+------+------+------+------+------| @@ -122,10 +122,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-------------------------------------------------------------------------------------------------' */ [_MOUSE] = LAYOUT( - KC_ESC , _______, _______, _______, _______, _______, _______, _______, KC_MS_BTN3, _______, _______, _______ , - KC_MS_ACCEL0, KC_MS_ACCEL1, KC_MS_ACCEL2, _______, _______, _______, _______, KC_MS_BTN1, KC_MS_UP, KC_MS_BTN2, _______, _______ , - KC_MS_ACCEL0, KC_MS_ACCEL1, KC_MS_ACCEL2, _______, _______, _______, _______, KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT, _______, _______ , - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + KC_ESC , _______, _______, _______, _______, _______, KC_MS_WH_LEFT, KC_MS_WH_UP, KC_MS_BTN3, KC_MS_WH_DOWN, KC_MS_WH_RIGHT, _______ , + KC_MS_ACCEL0, KC_MS_ACCEL1, KC_MS_ACCEL2, _______, _______, _______, _______, KC_MS_BTN1, KC_MS_UP, KC_MS_BTN2, _______, _______ , + KC_MS_ACCEL0, KC_MS_ACCEL1, KC_MS_ACCEL2, _______, _______, _______, _______, KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT, _______, _______ , + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), diff --git a/keyboards/handwired/atreus50/keymaps/ajp10304/readme.md b/keyboards/handwired/atreus50/keymaps/ajp10304/readme.md index 4f1bac8da9..640bcc46f6 100644 --- a/keyboards/handwired/atreus50/keymaps/ajp10304/readme.md +++ b/keyboards/handwired/atreus50/keymaps/ajp10304/readme.md @@ -7,8 +7,7 @@ the second is the output when shift is applied. **Note:** The below tables assume a UK layout. #### Flashing - -`make handwired/atreus50:ajp10304:flash` +Refer to the README.md of the keyboard you want to flash. ##### Main Qwerty Layer @@ -102,7 +101,7 @@ Activated when `fn` and `raise` held together. | | | | | | | | | | | | | | | | :---: | :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| -| ESC | | | | | | | | | | BTN3 | | | | +| ESC | | | | | | | | W_L | W_UP | BTN3 | W_DWN| W_R | | | ACC0 | ACC1 | ACC2 | | | | | | | BTN1 | UP | BTN2 | | | | ACC0 | ACC1 | ACC2 | | | | | | | LEFT | DOWN | RIGHT| | | | | | | | | | Ctrl | Alt | | | | | | | diff --git a/keyboards/kprepublic/jj40/keymaps/ajp10304/readme.md b/keyboards/kprepublic/jj40/keymaps/ajp10304/readme.md index 7336b1994b..8a7562d742 100644 --- a/keyboards/kprepublic/jj40/keymaps/ajp10304/readme.md +++ b/keyboards/kprepublic/jj40/keymaps/ajp10304/readme.md @@ -7,9 +7,7 @@ the second is the output when shift is applied. **Note:** The below tables assume a UK layout. #### Flashing -Use sleep to get a chance to get into boot mode. - -`make jj40:ajp10304:flash` +Refer to the README.md of the keyboard you want to flash. ##### Main Qwerty Layer @@ -103,7 +101,7 @@ Activated when `fn` and `raise` held together. | | | | | | | | | | | | | | :---: | :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| -| ESC | | | | | | | | BTN3 | | | | +| ESC | | | | | | W_L | W_UP | BTN3 | W_DWN| W_R | | | ACC0 | ACC1 | ACC2 | | | | | BTN1 | UP | BTN2 | | | | ACC0 | ACC1 | ACC2 | | | | | LEFT | DOWN | RIGHT| | | | | | | | | | | | | | | | diff --git a/keyboards/planck/keymaps/ajp10304/readme.md b/keyboards/planck/keymaps/ajp10304/readme.md index 97f0a00931..c68ba49283 100644 --- a/keyboards/planck/keymaps/ajp10304/readme.md +++ b/keyboards/planck/keymaps/ajp10304/readme.md @@ -7,9 +7,7 @@ the second is the output when shift is applied. **Note:** The below tables assume a UK layout. #### Flashing -Rev <=5: `make planck:ajp10304:flash` - -Rev 6: `make planck/rev6:ajp10304:flash` +Refer to the README.md of the keyboard you want to flash. ##### Main Qwerty Layer @@ -103,7 +101,7 @@ Activated when `fn` and `raise` held together. | | | | | | | | | | | | | | :---: | :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| -| ESC | | | | | | | | BTN3 | | | | +| ESC | | | | | | W_L | W_UP | BTN3 | W_DWN| W_R | | | ACC0 | ACC1 | ACC2 | | | | | BTN1 | UP | BTN2 | | | | ACC0 | ACC1 | ACC2 | | | | | LEFT | DOWN | RIGHT| | | | | | | | | | | | | | | | diff --git a/keyboards/quark/keymaps/ajp10304/readme.md b/keyboards/quark/keymaps/ajp10304/readme.md index 12090ccd44..83af702e2a 100644 --- a/keyboards/quark/keymaps/ajp10304/readme.md +++ b/keyboards/quark/keymaps/ajp10304/readme.md @@ -7,8 +7,7 @@ the second is the output when shift is applied. **Note:** The below tables assume a UK layout. #### Flashing - -`make quark:ajp10304:flash` +Refer to the README.md of the keyboard you want to flash. ##### Main Qwerty Layer @@ -102,7 +101,7 @@ Activated when `fn` and `raise` held together. | | | | | | | | | | | | | | :---: | :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| -| ESC | | | | | | | | BTN3 | | | | +| ESC | | | | | | W_L | W_UP | BTN3 | W_DWN| W_R | | | ACC0 | ACC1 | ACC2 | | | | | BTN1 | UP | BTN2 | | | | ACC0 | ACC1 | ACC2 | | | | | LEFT | DOWN | RIGHT| | | | | | | | | | | | | | | | diff --git a/layouts/community/ortho_4x12/ajp10304/keymap.c b/layouts/community/ortho_4x12/ajp10304/keymap.c index c55e99af79..4d9ddb1245 100644 --- a/layouts/community/ortho_4x12/ajp10304/keymap.c +++ b/layouts/community/ortho_4x12/ajp10304/keymap.c @@ -111,7 +111,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Mouse * ,-----------------------------------------------------------------------------------. - * | ESC | | | | | | | | BTN3 | | | | + * | ESC | | | | | | WH_L | WH_UP| BTN3 | WH_D | WH_R | | * |------+------+------+------+------+-------------+------+------+------+------+------| * | ACC0 | ACC1 | ACC2 | | | | | BTN1 | UP | BTN2 | | | * |------+------+------+------+------+------|------+------+------+------+------+------| @@ -121,10 +121,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * `-----------------------------------------------------------------------------------' */ [_MOUSE] = LAYOUT_ortho_4x12( - KC_ESC , _______, _______, _______, _______, _______, _______, _______, KC_MS_BTN3, _______, _______, _______, - KC_MS_ACCEL0, KC_MS_ACCEL1, KC_MS_ACCEL2, _______, _______, _______, _______, KC_MS_BTN1, KC_MS_UP, KC_MS_BTN2, _______, _______, - KC_MS_ACCEL0, KC_MS_ACCEL1, KC_MS_ACCEL2, _______, _______, _______, _______, KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + KC_ESC , _______, _______, _______, _______, _______, KC_MS_WH_LEFT, KC_MS_WH_UP, KC_MS_BTN3, KC_MS_WH_DOWN, KC_MS_WH_RIGHT, _______, + KC_MS_ACCEL0, KC_MS_ACCEL1, KC_MS_ACCEL2, _______, _______, _______, _______, KC_MS_BTN1, KC_MS_UP, KC_MS_BTN2, _______, _______, + KC_MS_ACCEL0, KC_MS_ACCEL1, KC_MS_ACCEL2, _______, _______, _______, _______, KC_MS_LEFT, KC_MS_DOWN, KC_MS_RIGHT, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), /* Num Pad diff --git a/layouts/community/ortho_4x12/ajp10304/readme.md b/layouts/community/ortho_4x12/ajp10304/readme.md index be6afa6fe4..6db0b851d9 100644 --- a/layouts/community/ortho_4x12/ajp10304/readme.md +++ b/layouts/community/ortho_4x12/ajp10304/readme.md @@ -101,7 +101,7 @@ Activated when `fn` and `raise` held together. | | | | | | | | | | | | | | :---: | :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| -| ESC | | | | | | | | BTN3 | | | | +| ESC | | | | | | W_L | W_UP | BTN3 | W_DWN| W_R | | | ACC0 | ACC1 | ACC2 | | | | | BTN1 | UP | BTN2 | | | | ACC0 | ACC1 | ACC2 | | | | | LEFT | DOWN | RIGHT| | | | | | | | | | | | | | | | diff --git a/users/ajp10304/readme.md b/users/ajp10304/readme.md index 2ac0a69964..bfc39535c1 100644 --- a/users/ajp10304/readme.md +++ b/users/ajp10304/readme.md @@ -1,4 +1,4 @@ -Copyright 2020 Alan Pocklington @ajp10304 +Copyright 2021 Alan Pocklington @ajp10304 This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -116,7 +116,7 @@ Activated when `fn` and `raise` held together. | | | | | | | | | | | | | | :---: | :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| :---:| -| ESC | | | | | | | | BTN3 | | | | +| ESC | | | | | | W_L | W_UP | BTN3 | W_DWN| W_R | | | ACC0 | ACC1 | ACC2 | | | | | BTN1 | UP | BTN2 | | | | ACC0 | ACC1 | ACC2 | | | | | LEFT | DOWN | RIGHT| | | | | | | | | | | | | | | | From fb739a67c92483f6c072886b9ffbb90e55b6582d Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Sat, 30 Oct 2021 15:13:40 +0100 Subject: [PATCH 371/595] Enable configuration of PWM frequency for IS31FL3733B (#14983) * Enable PWM frequency for IS31FL3733B * Document config option * clang --- docs/feature_rgb_matrix.md | 1 + drivers/led/issi/is31fl3733.c | 6 +++++- 2 files changed, 6 insertions(+), 1 deletion(-) diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md index 2660aad09b..708cb9f73e 100644 --- a/docs/feature_rgb_matrix.md +++ b/docs/feature_rgb_matrix.md @@ -82,6 +82,7 @@ You can use between 1 and 4 IS31FL3733 IC's. Do not specify `DRIVER_ADDR_` de |----------|-------------|---------| | `ISSI_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 | | `ISSI_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 | +| `ISSI_PWM_FREQUENCY` | (Optional) PWM Frequency Setting - IS31FL3733B only | 0 | | `DRIVER_COUNT` | (Required) How many RGB driver IC's are present | | | `DRIVER_LED_TOTAL` | (Required) How many RGB lights are present across all drivers | | | `DRIVER_ADDR_1` | (Required) Address for the first RGB driver | | diff --git a/drivers/led/issi/is31fl3733.c b/drivers/led/issi/is31fl3733.c index d99e5339c9..4ddd827caf 100644 --- a/drivers/led/issi/is31fl3733.c +++ b/drivers/led/issi/is31fl3733.c @@ -56,6 +56,10 @@ # define ISSI_PERSISTENCE 0 #endif +#ifndef ISSI_PWM_FREQUENCY +# define ISSI_PWM_FREQUENCY 0b000 // PFS - IS31FL3733B only +#endif + // Transfer buffer for TWITransmitData() uint8_t g_twi_transfer_buffer[20]; @@ -157,7 +161,7 @@ void IS31FL3733_init(uint8_t addr, uint8_t sync) { // Set global current to maximum. IS31FL3733_write_register(addr, ISSI_REG_GLOBALCURRENT, 0xFF); // Disable software shutdown. - IS31FL3733_write_register(addr, ISSI_REG_CONFIGURATION, (sync << 6) | 0x01); + IS31FL3733_write_register(addr, ISSI_REG_CONFIGURATION, ((sync & 0b11) << 6) | ((ISSI_PWM_FREQUENCY & 0b111) << 3) | 0x01); // Wait 10ms to ensure the device has woken up. wait_ms(10); From 5334e087ef848d54266537ecdc0b87cac976517e Mon Sep 17 00:00:00 2001 From: jonavin <71780717+Jonavin@users.noreply.github.com> Date: Sat, 30 Oct 2021 14:53:58 -0400 Subject: [PATCH 372/595] [Keymap] Jonavin userspace encoder alt tab scrolling (#14979) Co-authored-by: Jonavin <=> --- .../mechwild/obe/keymaps/jonavin/keymap.c | 4 +- .../mechwild/obe/keymaps/jonavin/readme.md | 4 + .../mechwild/obe/keymaps/jonavin/rules.mk | 2 + users/jonavin/jonavin.c | 177 ++------------ users/jonavin/jonavin.h | 8 + users/jonavin/jonavin_encoder.c | 219 ++++++++++++++++++ users/jonavin/readme.md | 11 +- users/jonavin/rules.mk | 11 +- 8 files changed, 271 insertions(+), 165 deletions(-) create mode 100644 users/jonavin/jonavin_encoder.c diff --git a/keyboards/mechwild/obe/keymaps/jonavin/keymap.c b/keyboards/mechwild/obe/keymaps/jonavin/keymap.c index 9e667fba15..27d09c718d 100644 --- a/keyboards/mechwild/obe/keymaps/jonavin/keymap.c +++ b/keyboards/mechwild/obe/keymaps/jonavin/keymap.c @@ -25,14 +25,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Base */ [_BASE] = LAYOUT( - KC_MUTE, KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DEL, + KC_TSTOG,KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DEL, KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_PGDN, TT(_RAISE), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_LSFTCAPSWIN,KC_Z, KC_X, KC_C, KC_V, KC_B, LT(_LOWER,KC_B), KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_SFTUP,KC_RSFT, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(_FN1), KC_RAISESPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ), [_FN1] = LAYOUT( - KC_NO, KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_INS, + KC_MUTE, KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_INS, KC_HOME, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_PSCR, KC_SLCK, KC_PAUS, KC_NO, KC_NO, KC_NO, RESET, KC_END, KC_CAPS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS, KC_NLCK, KC_NO, KC_NO, KC_NO, KC_NO, KC_PGUP, KC_TRNS, diff --git a/keyboards/mechwild/obe/keymaps/jonavin/readme.md b/keyboards/mechwild/obe/keymaps/jonavin/readme.md index f903a36f12..ec17981caf 100644 --- a/keyboards/mechwild/obe/keymaps/jonavin/readme.md +++ b/keyboards/mechwild/obe/keymaps/jonavin/readme.md @@ -18,6 +18,7 @@ Features - left spacebar Backspace - add double tap of Left Shift to toggle Caps Lock - Up arrow is also Shift when held +- Pushing the encoder switches the default encoder scroll between volume control and Alt-Tab rules.mk OPTIONS - Active features from userspace @@ -46,5 +47,8 @@ EMOTICON_ENABLE INVERT_NUMLOCK_INDICATOR - inverts the Num lock indicator, LED is on when num lokc is off +ALTTAB_SCROLL_ENABLE + - bind KS_TSTOG to a different key to change how this toggle happens + ## All layers diagram ![image](https://user-images.githubusercontent.com/71780717/137356366-6b23c71b-9499-473e-a1e3-c65644135fc6.png) diff --git a/keyboards/mechwild/obe/keymaps/jonavin/rules.mk b/keyboards/mechwild/obe/keymaps/jonavin/rules.mk index 008d0e1de9..6a9acf5d07 100644 --- a/keyboards/mechwild/obe/keymaps/jonavin/rules.mk +++ b/keyboards/mechwild/obe/keymaps/jonavin/rules.mk @@ -10,3 +10,5 @@ STARTUP_NUMLOCK_ON = yes ENCODER_DEFAULTACTIONS_ENABLE = yes EMOTICON_ENABLE = yes INVERT_NUMLOCK_INDICATOR = yes + +ALTTAB_SCROLL_ENABLE = yes diff --git a/users/jonavin/jonavin.c b/users/jonavin/jonavin.c index 367601dfba..b66b444f36 100644 --- a/users/jonavin/jonavin.c +++ b/users/jonavin/jonavin.c @@ -95,171 +95,21 @@ along with this program. If not, see . } // timeout_threshold = 0 will disable timeout } +#endif // IDLE_TIMEOUT_ENABLE + +#if defined(ALTTAB_SCROLL_ENABLE) || defined(IDLE_TIMEOUT_ENABLE) // timer features __attribute__((weak)) void matrix_scan_keymap(void) {} void matrix_scan_user(void) { - timeout_tick_timer(); + #ifdef ALTTAB_SCROLL_ENABLE + encoder_tick_alttabscroll(); + #endif + #ifdef IDLE_TIMEOUT_ENABLE + timeout_tick_timer(); + #endif matrix_scan_keymap(); } -#endif // IDLE_TIMEOUT_ENABLE - - -#ifdef ENCODER_ENABLE - #ifndef DYNAMIC_KEYMAP_LAYER_COUNT - #define DYNAMIC_KEYMAP_LAYER_COUNT 4 //default in case this is not already defined elsewhere - #endif - #ifndef ENCODER_DEFAULTACTIONS_INDEX - #define ENCODER_DEFAULTACTIONS_INDEX 0 // can select encoder index if there are multiple encoders - #endif - - void encoder_action_volume(bool clockwise) { - if (clockwise) - tap_code(KC_VOLU); - else - tap_code(KC_VOLD); - } - - void encoder_action_mediatrack(bool clockwise) { - if (clockwise) - tap_code(KC_MEDIA_NEXT_TRACK); - else - tap_code(KC_MEDIA_PREV_TRACK); - } - - void encoder_action_navword(bool clockwise) { - if (clockwise) - tap_code16(LCTL(KC_RGHT)); - else - tap_code16(LCTL(KC_LEFT)); - } - - void encoder_action_navpage(bool clockwise) { - if (clockwise) - tap_code16(KC_PGUP); - else - tap_code16(KC_PGDN); - } - - // LAYER HANDLING - uint8_t selected_layer = 0; - - uint8_t get_selected_layer(void) { - return selected_layer; - } - - void encoder_action_layerchange(bool clockwise) { - if (clockwise) { - if(selected_layer < (DYNAMIC_KEYMAP_LAYER_COUNT - 1)) { - selected_layer ++; - layer_move(selected_layer); - } - } else { - if (selected_layer > 0) { - selected_layer --; - layer_move(selected_layer); - } - } - } - - #ifdef RGB_MATRIX_ENABLE - void encoder_action_rgb_speed(bool clockwise) { - if (clockwise) - rgb_matrix_increase_speed_noeeprom(); - else - rgb_matrix_decrease_speed_noeeprom(); - } - void encoder_action_rgb_hue(bool clockwise) { - if (clockwise) - rgb_matrix_increase_hue_noeeprom(); - else - rgb_matrix_decrease_hue_noeeprom(); - } - void encoder_action_rgb_saturation(bool clockwise) { - if (clockwise) - rgb_matrix_increase_sat_noeeprom(); - else - rgb_matrix_decrease_sat_noeeprom(); - } - void encoder_action_rgb_brightness(bool clockwise) { - if (clockwise) - rgb_matrix_increase_val_noeeprom(); - else - rgb_matrix_decrease_val_noeeprom(); - } - void encoder_action_rgb_mode(bool clockwise) { - if (clockwise) - rgb_matrix_step_noeeprom(); - else - rgb_matrix_step_reverse_noeeprom(); - } - #elif defined(RGBLIGHT_ENABLE) - void encoder_action_rgb_speed(bool clockwise) { - if (clockwise) - rgblight_increase_speed_noeeprom(); - else - rgblight_decrease_speed_noeeprom(); - } - void encoder_action_rgb_hue(bool clockwise) { - if (clockwise) - rgblight_increase_hue_noeeprom(); - else - rgblight_decrease_hue_noeeprom(); - } - void encoder_action_rgb_saturation(bool clockwise) { - if (clockwise) - rgblight_increase_sat_noeeprom(); - else - rgblight_decrease_sat_noeeprom(); - } - void encoder_action_rgb_brightness(bool clockwise) { - if (clockwise) - rgblight_increase_val_noeeprom(); - else - rgblight_decrease_val_noeeprom(); - } - void encoder_action_rgb_mode(bool clockwise) { - if (clockwise) - rgblight_step_noeeprom(); - else - rgblight_step_reverse_noeeprom(); - } - #endif // RGB_MATRIX_ENABLE || RGBLIGHT_ENABLE -#endif // ENCODER_ENABLE - -#if defined(ENCODER_ENABLE) && defined(ENCODER_DEFAULTACTIONS_ENABLE) // Encoder Functionality - - __attribute__((weak)) bool encoder_update_keymap(uint8_t index, bool clockwise) { return true; } - - bool encoder_update_user(uint8_t index, bool clockwise) { - if (!encoder_update_keymap(index, clockwise)) { return false; } - if (index != ENCODER_DEFAULTACTIONS_INDEX) {return true;} // exit if the index doesn't match - uint8_t mods_state = get_mods(); - if (mods_state & MOD_BIT(KC_LSFT) ) { // If you are holding L shift, encoder changes layers - encoder_action_layerchange(clockwise); - } else if (mods_state & MOD_BIT(KC_RSFT) ) { // If you are holding R shift, Page up/dn - unregister_mods(MOD_BIT(KC_RSFT)); - encoder_action_navpage(clockwise); - register_mods(MOD_BIT(KC_RSFT)); - } else if (mods_state & MOD_BIT(KC_LCTL)) { // if holding Left Ctrl, navigate next/prev word - encoder_action_navword(clockwise); - } else if (mods_state & MOD_BIT(KC_LALT)) { // if holding Left Alt, change media next/prev track - encoder_action_mediatrack(clockwise); - } else { - switch(get_highest_layer(layer_state)) { - case _FN1: - #ifdef IDLE_TIMEOUT_ENABLE - timeout_update_threshold(clockwise); - #endif - break; - default: - encoder_action_volume(clockwise); // Otherwise it just changes volume - break; - } - } - return false; - } -#endif // ENCODER_ENABLE - +#endif // ALTTAB_SCROLL_ENABLE or IDLE_TIMEOUT_ENABLE // PROCESS KEY CODES __attribute__ ((weak)) bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { return true; } @@ -326,6 +176,13 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { break; #endif // EMOTICON_ENABLE + #ifdef ALTTAB_SCROLL_ENABLE + case KC_TSTOG: + if (record->event.pressed) encoder_toggle_alttabscroll(); + else unregister_code16(keycode); + break; + #endif // ALTTAB_SCROLL_ENABLE + default: if (record->event.pressed) { #ifdef RGB_MATRIX_ENABLE diff --git a/users/jonavin/jonavin.h b/users/jonavin/jonavin.h index 21b972ed75..ab2ce0dff2 100644 --- a/users/jonavin/jonavin.h +++ b/users/jonavin/jonavin.h @@ -45,6 +45,8 @@ enum custom_user_keycodes { EMO_JOY, // (^o^) EMO_TEARS, // (T_T) + KC_TSTOG, // Tab Scroll Toggle + NEW_SAFE_RANGE // new safe range for keymap level custom keycodes }; @@ -91,6 +93,12 @@ enum custom_user_keycodes { void encoder_action_rgb_brightness(bool clockwise); void encoder_action_rgb_mode(bool clockwise); #endif // RGB_MATRIX_ENABLE / RGBLIGHT_ENABLE + + #ifdef ALTTAB_SCROLL_ENABLE + void encoder_action_alttabscroll(bool clockwise); + void encoder_toggle_alttabscroll(void); + void encoder_tick_alttabscroll(void); + #endif // ALTTAB_SCROLL_ENABLE #endif // ENCODER_ENABLE diff --git a/users/jonavin/jonavin_encoder.c b/users/jonavin/jonavin_encoder.c new file mode 100644 index 0000000000..387ed5f430 --- /dev/null +++ b/users/jonavin/jonavin_encoder.c @@ -0,0 +1,219 @@ + +/* Copyright 2021 Jonavin Eng @Jonavin + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + + +#include QMK_KEYBOARD_H +#include "jonavin.h" + +#ifdef ENCODER_ENABLE + #ifndef DYNAMIC_KEYMAP_LAYER_COUNT + #define DYNAMIC_KEYMAP_LAYER_COUNT 4 //default in case this is not already defined elsewhere + #endif + #ifndef ENCODER_DEFAULTACTIONS_INDEX + #define ENCODER_DEFAULTACTIONS_INDEX 0 // can select encoder index if there are multiple encoders + #endif + + void encoder_action_volume(bool clockwise) { + if (clockwise) + tap_code(KC_VOLU); + else + tap_code(KC_VOLD); + } + + void encoder_action_mediatrack(bool clockwise) { + if (clockwise) + tap_code(KC_MEDIA_NEXT_TRACK); + else + tap_code(KC_MEDIA_PREV_TRACK); + } + + void encoder_action_navword(bool clockwise) { + if (clockwise) + tap_code16(LCTL(KC_RGHT)); + else + tap_code16(LCTL(KC_LEFT)); + } + + void encoder_action_navpage(bool clockwise) { + if (clockwise) + tap_code16(KC_PGUP); + else + tap_code16(KC_PGDN); + } + + // LAYER HANDLING + uint8_t selected_layer = 0; + + uint8_t get_selected_layer(void) { + return selected_layer; + } + + void encoder_action_layerchange(bool clockwise) { + if (clockwise) { + if(selected_layer < (DYNAMIC_KEYMAP_LAYER_COUNT - 1)) { + selected_layer ++; + layer_move(selected_layer); + } + } else { + if (selected_layer > 0) { + selected_layer --; + layer_move(selected_layer); + } + } + } + + #ifdef RGB_MATRIX_ENABLE + void encoder_action_rgb_speed(bool clockwise) { + if (clockwise) + rgb_matrix_increase_speed_noeeprom(); + else + rgb_matrix_decrease_speed_noeeprom(); + } + void encoder_action_rgb_hue(bool clockwise) { + if (clockwise) + rgb_matrix_increase_hue_noeeprom(); + else + rgb_matrix_decrease_hue_noeeprom(); + } + void encoder_action_rgb_saturation(bool clockwise) { + if (clockwise) + rgb_matrix_increase_sat_noeeprom(); + else + rgb_matrix_decrease_sat_noeeprom(); + } + void encoder_action_rgb_brightness(bool clockwise) { + if (clockwise) + rgb_matrix_increase_val_noeeprom(); + else + rgb_matrix_decrease_val_noeeprom(); + } + void encoder_action_rgb_mode(bool clockwise) { + if (clockwise) + rgb_matrix_step_noeeprom(); + else + rgb_matrix_step_reverse_noeeprom(); + } + #elif defined(RGBLIGHT_ENABLE) + void encoder_action_rgb_speed(bool clockwise) { + if (clockwise) + rgblight_increase_speed_noeeprom(); + else + rgblight_decrease_speed_noeeprom(); + } + void encoder_action_rgb_hue(bool clockwise) { + if (clockwise) + rgblight_increase_hue_noeeprom(); + else + rgblight_decrease_hue_noeeprom(); + } + void encoder_action_rgb_saturation(bool clockwise) { + if (clockwise) + rgblight_increase_sat_noeeprom(); + else + rgblight_decrease_sat_noeeprom(); + } + void encoder_action_rgb_brightness(bool clockwise) { + if (clockwise) + rgblight_increase_val_noeeprom(); + else + rgblight_decrease_val_noeeprom(); + } + void encoder_action_rgb_mode(bool clockwise) { + if (clockwise) + rgblight_step_noeeprom(); + else + rgblight_step_reverse_noeeprom(); + } + #endif // RGB_MATRIX_ENABLE || RGBLIGHT_ENABLE + + #ifdef ALTTAB_SCROLL_ENABLE + bool is_tab_scrolling = false; + bool is_alt_tab_active = false; + uint16_t alt_tab_timer = 0; + + + void encoder_toggle_alttabscroll(void) { + is_tab_scrolling = !is_tab_scrolling; + } + + void encoder_action_alttabscroll(bool clockwise) { + if (clockwise) { + if (!is_alt_tab_active) { + is_alt_tab_active = true; + register_mods(MOD_RALT); + } + tap_code16(KC_TAB); + } + else { + tap_code16(S(KC_TAB)); + } + alt_tab_timer = timer_read(); + } + + void encoder_tick_alttabscroll(void) { + if (is_alt_tab_active) { + if (timer_elapsed(alt_tab_timer) > 600) { + unregister_mods(MOD_RALT); + is_alt_tab_active = false; + } + } + } + #endif // ALTTAB_SCROLL_ENABLE +#endif // ENCODER_ENABLE + +#if defined(ENCODER_ENABLE) && defined(ENCODER_DEFAULTACTIONS_ENABLE) // Encoder Functionality + + __attribute__((weak)) bool encoder_update_keymap(uint8_t index, bool clockwise) { return true; } + + bool encoder_update_user(uint8_t index, bool clockwise) { + if (!encoder_update_keymap(index, clockwise)) { return false; } + if (index != ENCODER_DEFAULTACTIONS_INDEX) {return true;} // exit if the index doesn't match + uint8_t mods_state = get_mods(); + if (mods_state & MOD_BIT(KC_LSFT) ) { // If you are holding L shift, encoder changes layers + encoder_action_layerchange(clockwise); + } else if (mods_state & MOD_BIT(KC_RSFT) ) { // If you are holding R shift, Page up/dn + unregister_mods(MOD_BIT(KC_RSFT)); + encoder_action_navpage(clockwise); + register_mods(MOD_BIT(KC_RSFT)); + } else if (mods_state & MOD_BIT(KC_LCTL)) { // if holding Left Ctrl, navigate next/prev word + encoder_action_navword(clockwise); + } else if (mods_state & MOD_BIT(KC_LALT)) { // if holding Left Alt, change media next/prev track + encoder_action_mediatrack(clockwise); + } else { + switch(get_highest_layer(layer_state)) { + case _FN1: + #ifdef IDLE_TIMEOUT_ENABLE + timeout_update_threshold(clockwise); + #endif + break; + default: + #ifdef ALTTAB_SCROLL_ENABLE + if (is_tab_scrolling) + encoder_action_alttabscroll(clockwise); + else + encoder_action_volume(clockwise); // Otherwise it just changes volume + #else + encoder_action_volume(clockwise); // Otherwise it just changes volume + #endif // ALTTAB_SCROLL_ENABLE + break; + } + } + return false; + } +#endif // ENCODER_ENABLE + + diff --git a/users/jonavin/readme.md b/users/jonavin/readme.md index 1b064ddc3c..8ec0e0ea16 100644 --- a/users/jonavin/readme.md +++ b/users/jonavin/readme.md @@ -35,6 +35,7 @@ KEYCODES: - KC_SFTUP RShift when held, Up arrow when tapped - KC_RAISESPC _RAISE layer mod when held, space when tapped - KC_LOWERSPC _LOWER layer mod when held, space when tapped +- KC_TSTOG toggles between volume and Alt-Tab encoder control - When EMOTICON_ENABLE = yes - EMO_SHRUG `\_("/)_/` @@ -59,7 +60,9 @@ AVAILABLE ENCODER ACTIONS: - void encoder_action_rgb_saturation(bool clockwise); - void encoder_action_rgb_brightness(bool clockwise); - void encoder_action_rgb_mode(bool clockwise); - +- +- void encoder_action_alttabscroll(bool clockwise) +- void encoder_toggle_alttabscroll(void); ENABLE FEATURES your keymap rules.mk --------------------------------------- @@ -89,6 +92,12 @@ EMOTICON_ENABLE INVERT_NUMLOCK_INDICATOR - inverts the Num lock indicator, LED is on when num lock is off +ALTTAB_SCROLL_ENABLE +- When ENCODER_DEFAULTACTIONS_ENABLE = yes, + Enables Alt-Tab scrolling functions in default encoder, + bind KS_TSTOG to a key to enable/disable Alt-Tab vs Volume control +- When defining your own encoder functions use encoder_action_alttabscroll(bool clockwise) to assign the encodr action + FUNCTIONS ------------------------ diff --git a/users/jonavin/rules.mk b/users/jonavin/rules.mk index 6460021247..4f65db27b9 100644 --- a/users/jonavin/rules.mk +++ b/users/jonavin/rules.mk @@ -1,6 +1,13 @@ SRC += jonavin.c -ifeq ($(strip $(ENCODER_DEFAULTACTIONS_ENABLE)), yes) - OPT_DEFS += -DENCODER_DEFAULTACTIONS_ENABLE +ifdef ENCODER_ENABLE + # include encoder related code when enabled + ifeq ($(strip $(ENCODER_DEFAULTACTIONS_ENABLE)), yes) + OPT_DEFS += -DENCODER_DEFAULTACTIONS_ENABLE + endif + ifeq ($(strip $(ALTTAB_SCROLL_ENABLE)), yes) + OPT_DEFS += -DALTTAB_SCROLL_ENABLE + endif + SRC += jonavin_encoder.c endif ifeq ($(strip $(TD_LSFT_CAPSLOCK_ENABLE)), yes) OPT_DEFS += -DTD_LSFT_CAPSLOCK_ENABLE From 32d18f28570eb030331cd0f6e83ea2ab822cd9e5 Mon Sep 17 00:00:00 2001 From: Albert Y <76888457+filterpaper@users.noreply.github.com> Date: Sun, 31 Oct 2021 02:54:36 +0800 Subject: [PATCH 373/595] [Keymap] Improved settings for Cradio default keymap (#14971) Co-authored-by: filterpaper --- keyboards/cradio/keymaps/default/config.h | 39 +++++++++++++++++++++++ 1 file changed, 39 insertions(+) create mode 100644 keyboards/cradio/keymaps/default/config.h diff --git a/keyboards/cradio/keymaps/default/config.h b/keyboards/cradio/keymaps/default/config.h new file mode 100644 index 0000000000..dd469ca553 --- /dev/null +++ b/keyboards/cradio/keymaps/default/config.h @@ -0,0 +1,39 @@ +/* Copyright 2018-2021 + * ENDO Katsuhiro + * David Philip Barr <@davidphilipbarr> + * Pierre Chevalier + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +// Defaults for usable home row mods +#define TAPPING_TERM 230 +#define IGNORE_MOD_TAP_INTERRUPT + +// Improved mouse key defaults +// Delay between pressing a key and cursor movement +#define MOUSEKEY_DELAY 16 +// Time between cursor movements in milliseconds +#define MOUSEKEY_INTERVAL 16 +// Step size for acceleration +#define MOUSEKEY_MOVE_DELTA 9 +#define MOUSEKEY_MAX_SPEED 12 +#define MOUSEKEY_TIME_TO_MAX 70 +#define MOUSEKEY_WHEEL_DELAY 16 +#define MOUSEKEY_WHEEL_INTERVAL 30 +#define MOUSEKEY_WHEEL_MAX_SPEED 10 +#define MOUSEKEY_WHEEL_TIME_TO_MAX 95 + From 1351dfff08e0ba6b8cac2399a51c9f066979caf9 Mon Sep 17 00:00:00 2001 From: MechMerlin <30334081+mechmerlin@users.noreply.github.com> Date: Sat, 30 Oct 2021 21:17:42 -0700 Subject: [PATCH 374/595] [Keymap] Disable in-switch RGB when computer goes to bed (#14993) --- users/mechmerlin/changelog.md | 4 ++++ users/mechmerlin/config.h | 4 ++++ users/mechmerlin/readme.md | 4 ++-- 3 files changed, 10 insertions(+), 2 deletions(-) diff --git a/users/mechmerlin/changelog.md b/users/mechmerlin/changelog.md index dc98e2af01..733c65a979 100644 --- a/users/mechmerlin/changelog.md +++ b/users/mechmerlin/changelog.md @@ -1,6 +1,10 @@ # Changelog All notable changes to my userspace will be documented in this file. +## [0.4.1] - 2021-10-30 + +### Added +- `RGB_DISABLE_WHEN_USB_SUSPENDED` added in `config.h`. Couple of my boards now have per key RGB and have been staying on when my computer sleeps. ## [0.4.0] - 2021-10-05 ### Added diff --git a/users/mechmerlin/config.h b/users/mechmerlin/config.h index 698e237b01..459c181673 100644 --- a/users/mechmerlin/config.h +++ b/users/mechmerlin/config.h @@ -5,6 +5,10 @@ #define RGBLIGHT_ANIMATIONS #endif // RGBLIGHT_ENABLE +#ifdef RGB_MATRIX_ENABLE + #define RGB_DISABLE_WHEN_USB_SUSPENDED +#endif + #ifdef AUDIO_CLICKY #define AUDIO_CLICKY_ON #define AUDIO_CLICKY_FREQ_DEFAULT 261.63f diff --git a/users/mechmerlin/readme.md b/users/mechmerlin/readme.md index c0b1c54c55..1070953111 100644 --- a/users/mechmerlin/readme.md +++ b/users/mechmerlin/readme.md @@ -39,9 +39,9 @@ Output the version of QMK Firmware on device. ## QMK Features ---- -### RGBLIGHT_SLEEP +### RGBLIGHT_SLEEP and RGB_DISABLE_WHEN_USB_SUSPENDED -Ensures that when my computer is in sleep mode, the keyboard underglow lights will also be off. +Ensures that when my computer is in sleep mode, the keyboard underglow and inswitch RGB lights will also be off. ### Audio Clicky From ba69c47bb896a7354d1c6f58b4e43626fb329b72 Mon Sep 17 00:00:00 2001 From: MechMerlin <30334081+mechmerlin@users.noreply.github.com> Date: Sun, 31 Oct 2021 01:17:23 -0700 Subject: [PATCH 375/595] Add new default community layout for no f-row TKLs (#14812) Co-authored-by: Ryan --- .../default_tkl_nofrow_ansi/keymap.c | 24 +++++ layouts/default/tkl_nofrow_ansi/info.json | 90 +++++++++++++++++++ layouts/default/tkl_nofrow_ansi/layout.json | 6 ++ layouts/default/tkl_nofrow_ansi/readme.md | 3 + 4 files changed, 123 insertions(+) create mode 100644 layouts/default/tkl_nofrow_ansi/default_tkl_nofrow_ansi/keymap.c create mode 100644 layouts/default/tkl_nofrow_ansi/info.json create mode 100644 layouts/default/tkl_nofrow_ansi/layout.json create mode 100644 layouts/default/tkl_nofrow_ansi/readme.md diff --git a/layouts/default/tkl_nofrow_ansi/default_tkl_nofrow_ansi/keymap.c b/layouts/default/tkl_nofrow_ansi/default_tkl_nofrow_ansi/keymap.c new file mode 100644 index 0000000000..c2b7ecfeaf --- /dev/null +++ b/layouts/default/tkl_nofrow_ansi/default_tkl_nofrow_ansi/keymap.c @@ -0,0 +1,24 @@ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ ┌───┬───┬───┐ + * │Esc│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ Backsp│ │Ins│Hom│PgU│ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ ├───┼───┼───┤ + * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │ │Del│End│PgD│ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ └───┴───┴───┘ + * │ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter │ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────────┤ ┌───┐ + * │ Shift │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ Shift │ │ ↑ │ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤ ┌───┼───┼───┐ + * │Ctrl│GUI │Alt │ │ Alt│ GUI│Menu│Ctrl│ │ ← │ ↓ │ → │ + * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ └───┴───┴───┘ + */ + [0] = LAYOUT_tkl_nofrow_ansi( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ) +}; diff --git a/layouts/default/tkl_nofrow_ansi/info.json b/layouts/default/tkl_nofrow_ansi/info.json new file mode 100644 index 0000000000..dfb0fc92b4 --- /dev/null +++ b/layouts/default/tkl_nofrow_ansi/info.json @@ -0,0 +1,90 @@ +{ + "keyboard_name": "Tenkeyless No F-Row ANSI Layout", + "url": "", + "maintainer": "qmk", + "layouts": { + "LAYOUT": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0, "w":2}, + + {"x":15.25, "y":0}, + {"x":16.25, "y":0}, + {"x":17.25, "y":0}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":15.25, "y":1}, + {"x":16.25, "y":1}, + {"x":17.25, "y":1}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3}, + {"x":12.25, "y":3, "w":2.75}, + + {"x":16.25, "y":3}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":6.25}, + {"x":10, "y":4, "w":1.25}, + {"x":11.25, "y":4, "w":1.25}, + {"x":12.5, "y":4, "w":1.25}, + {"x":13.75, "y":4, "w":1.25}, + + {"x":15.25, "y":4}, + {"x":16.25, "y":4}, + {"x":17.25, "y":4} + ] + } + } +} \ No newline at end of file diff --git a/layouts/default/tkl_nofrow_ansi/layout.json b/layouts/default/tkl_nofrow_ansi/layout.json new file mode 100644 index 0000000000..b8f86b4ac2 --- /dev/null +++ b/layouts/default/tkl_nofrow_ansi/layout.json @@ -0,0 +1,6 @@ +[{a:7},"","","","","","","","","","","","","",{w:2},"",{x:0.25},"","",""], +[{w:1.5},"","","","","","","","","","","","","",{w:1.5},"",{x:0.25},"","",""], +[{w:1.75},"","","","","","","","","","","","",{w:2.25},""], +[{w:2.25},"","","","","","","","","","","",{w:2.75},"",{x:1.25},""], +[{w:1.25},"",{w:1.25},"",{w:1.25},"",{w:6.25},"",{w:1.25},"",{w:1.25},"",{w:1.25},"",{w:1.25},"",{x:0.25},"","",""] + diff --git a/layouts/default/tkl_nofrow_ansi/readme.md b/layouts/default/tkl_nofrow_ansi/readme.md new file mode 100644 index 0000000000..693b1245e6 --- /dev/null +++ b/layouts/default/tkl_nofrow_ansi/readme.md @@ -0,0 +1,3 @@ +# tkl_nofrow_ansi + + LAYOUT_tkl_nofrow_ansi From 53d614955db8b1cc57aeac9b036ca2816c54d486 Mon Sep 17 00:00:00 2001 From: takashicompany Date: Sun, 31 Oct 2021 17:17:38 +0900 Subject: [PATCH 376/595] [Keyboard] Add new keyboard "QooLee" (#14977) Co-authored-by: Ryan --- keyboards/takashicompany/qoolee/config.h | 153 +++++++++++++++++ keyboards/takashicompany/qoolee/info.json | 156 ++++++++++++++++++ .../qoolee/keymaps/default/keymap.c | 79 +++++++++ .../qoolee/keymaps/via/config.h | 20 +++ .../qoolee/keymaps/via/keymap.c | 79 +++++++++ .../qoolee/keymaps/via/rules.mk | 1 + keyboards/takashicompany/qoolee/qoolee.c | 17 ++ keyboards/takashicompany/qoolee/qoolee.h | 37 +++++ keyboards/takashicompany/qoolee/readme.md | 30 ++++ keyboards/takashicompany/qoolee/rules.mk | 23 +++ 10 files changed, 595 insertions(+) create mode 100644 keyboards/takashicompany/qoolee/config.h create mode 100644 keyboards/takashicompany/qoolee/info.json create mode 100644 keyboards/takashicompany/qoolee/keymaps/default/keymap.c create mode 100644 keyboards/takashicompany/qoolee/keymaps/via/config.h create mode 100644 keyboards/takashicompany/qoolee/keymaps/via/keymap.c create mode 100644 keyboards/takashicompany/qoolee/keymaps/via/rules.mk create mode 100644 keyboards/takashicompany/qoolee/qoolee.c create mode 100644 keyboards/takashicompany/qoolee/qoolee.h create mode 100644 keyboards/takashicompany/qoolee/readme.md create mode 100644 keyboards/takashicompany/qoolee/rules.mk diff --git a/keyboards/takashicompany/qoolee/config.h b/keyboards/takashicompany/qoolee/config.h new file mode 100644 index 0000000000..99c8ce0142 --- /dev/null +++ b/keyboards/takashicompany/qoolee/config.h @@ -0,0 +1,153 @@ +/* +Copyright 2021 takashicompany + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x7463 // tc = takashicompany +#define PRODUCT_ID 0x0013 +#define DEVICE_VER 0x0001 +#define MANUFACTURER takashicompany +#define PRODUCT QooLee + +/* key matrix size */ +#define MATRIX_ROWS 3 +#define MATRIX_COLS 12 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { E6, B4, B5 } +#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6, D0, D4, C6, D7} +#define UNUSED_PINS + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +#define ENCODER_RESOLUTION 1 +#define ENCODERS_PAD_A { D2 } +#define ENCODERS_PAD_B { D1 } + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +//#define LED_NUM_LOCK_PIN B0 +//#define LED_CAPS_LOCK_PIN B1 +//#define LED_SCROLL_LOCK_PIN B2 +//#define LED_COMPOSE_PIN B3 +//#define LED_KANA_PIN B4 + +//#define BACKLIGHT_PIN B7 +//#define BACKLIGHT_LEVELS 3 +//#define BACKLIGHT_BREATHING + +#define RGB_DI_PIN D3 +#ifdef RGB_DI_PIN +# define RGBLED_NUM 16 +# define RGBLIGHT_HUE_STEP 8 +# define RGBLIGHT_SAT_STEP 8 +# define RGBLIGHT_VAL_STEP 8 +# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +# define RGBLIGHT_EFFECT_BREATHING +# define RGBLIGHT_EFFECT_RAINBOW_MOOD +# define RGBLIGHT_EFFECT_RAINBOW_SWIRL +# define RGBLIGHT_EFFECT_SNAKE +# define RGBLIGHT_EFFECT_KNIGHT +# define RGBLIGHT_EFFECT_CHRISTMAS +# define RGBLIGHT_EFFECT_STATIC_GRADIENT +# define RGBLIGHT_EFFECT_RGB_TEST +# define RGBLIGHT_EFFECT_ALTERNATING +/*== customize breathing effect ==*/ +/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +/*==== use exp() and sin() ====*/ +//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 \ No newline at end of file diff --git a/keyboards/takashicompany/qoolee/info.json b/keyboards/takashicompany/qoolee/info.json new file mode 100644 index 0000000000..b2245a91c7 --- /dev/null +++ b/keyboards/takashicompany/qoolee/info.json @@ -0,0 +1,156 @@ +{ + "keyboard_name": "QooLee", + "url": "https://github.com/takashicompany/qoolee", + "maintainer": "takachicompany", + "layouts": { + "LAYOUT": { + "layout": [ + { + "x": 0, + "y": 0, + "w": 1.5 + }, + { + "x": 1.5, + "y": 0 + }, + { + "x": 2.5, + "y": 0 + }, + { + "x": 3.5, + "y": 0 + }, + { + "x": 4.5, + "y": 0 + }, + { + "x": 5.5, + "y": 0 + }, + { + "x": 6.5, + "y": 0 + }, + { + "x": 7.5, + "y": 0 + }, + { + "x": 8.5, + "y": 0 + }, + { + "x": 9.5, + "y": 0 + }, + { + "x": 10.5, + "y": 0 + }, + { + "x": 11.75, + "y": 0, + "w": 1.25, + "h": 2 + }, + { + "x": 0, + "y": 1, + "w": 1.75 + }, + { + "x": 1.75, + "y": 1 + }, + { + "x": 2.75, + "y": 1 + }, + { + "x": 3.75, + "y": 1 + }, + { + "x": 4.75, + "y": 1 + }, + { + "x": 5.75, + "y": 1 + }, + { + "x": 6.75, + "y": 1 + }, + { + "x": 7.75, + "y": 1 + }, + { + "x": 8.75, + "y": 1 + }, + { + "x": 9.75, + "y": 1 + }, + { + "x": 10.75, + "y": 1 + }, + { + "x": 0, + "y": 2, + "w": 2 + }, + { + "x": 2, + "y": 2 + }, + { + "x": 3, + "y": 2 + }, + { + "x": 4, + "y": 2 + }, + { + "x": 5, + "y": 2 + }, + { + "x": 6, + "y": 2 + }, + { + "x": 7, + "y": 2 + }, + { + "x": 8, + "y": 2 + }, + { + "x": 9, + "y": 2 + }, + { + "x": 10, + "y": 2 + }, + { + "x": 11, + "y": 2 + }, + { + "x": 12, + "y": 2 + } + ] + } + } +} \ No newline at end of file diff --git a/keyboards/takashicompany/qoolee/keymaps/default/keymap.c b/keyboards/takashicompany/qoolee/keymaps/default/keymap.c new file mode 100644 index 0000000000..64d6ff7aea --- /dev/null +++ b/keyboards/takashicompany/qoolee/keymaps/default/keymap.c @@ -0,0 +1,79 @@ +/* Copyright 2021 takashicompany + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + LAYOUT( + KC_TAB, LT(2, KC_Q), KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, GUI_T(KC_O), ALT_T(KC_P), + KC_LCTL, KC_A, KC_S, LT(2, KC_D), KC_F, KC_G, KC_H, KC_J, LT(2, KC_K), KC_L, KC_SCLN, KC_ENT, + KC_LSFT, KC_Z, GUI_T(KC_X), ALT_T(KC_C), LT(1, KC_V), KC_B, KC_N, LT(1, KC_M), KC_COMM, CTL_T(KC_DOT), KC_SLSH, KC_BSPC + ), + + LAYOUT( + KC_TRNS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, + KC_TRNS, KC_EQL, KC_LBRC, KC_SLSH, KC_MINS, KC_RO, KC_SCLN, KC_QUOT, KC_RBRC, KC_NUHS, KC_JYEN, KC_TRNS, + KC_TRNS, KC_LSFT, KC_LGUI, KC_LALT, KC_LANG2, KC_LSFT, KC_SPC, KC_LANG1, KC_TRNS, KC_TRNS, KC_DEL, KC_TRNS + ), + + LAYOUT( + KC_TRNS, KC_ESC, KC_TAB, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_UP, KC_NO, KC_NO, + KC_TRNS, KC_LCTL, LALT(KC_C), KC_QUES, KC_EXLM, KC_NO, KC_NO, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, KC_TRNS, + KC_TRNS, KC_LSFT, KC_LGUI, KC_LALT, KC_LANG2, KC_TRNS, KC_TRNS, KC_LANG1, KC_NO, MO(3), KC_DEL, KC_TRNS + ), + + LAYOUT( + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, + KC_TRNS, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS, + KC_TRNS, RGB_M_K, RGB_M_X, RGB_M_G, RGB_M_T, RGB_M_T, KC_F11, KC_F12, KC_CAPS, KC_NO, KC_NO, KC_TRNS + ), + + LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; + +bool encoder_update_user(uint8_t index, bool clockwise) { + + if (clockwise) { + tap_code(KC_MS_WH_UP); + } else { + tap_code(KC_MS_WH_DOWN); + } + + return true; +} + diff --git a/keyboards/takashicompany/qoolee/keymaps/via/config.h b/keyboards/takashicompany/qoolee/keymaps/via/config.h new file mode 100644 index 0000000000..ed834d1aef --- /dev/null +++ b/keyboards/takashicompany/qoolee/keymaps/via/config.h @@ -0,0 +1,20 @@ +/* +Copyright 2021 takashicompany + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#define DYNAMIC_KEYMAP_LAYER_COUNT 8 \ No newline at end of file diff --git a/keyboards/takashicompany/qoolee/keymaps/via/keymap.c b/keyboards/takashicompany/qoolee/keymaps/via/keymap.c new file mode 100644 index 0000000000..64d6ff7aea --- /dev/null +++ b/keyboards/takashicompany/qoolee/keymaps/via/keymap.c @@ -0,0 +1,79 @@ +/* Copyright 2021 takashicompany + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + LAYOUT( + KC_TAB, LT(2, KC_Q), KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, GUI_T(KC_O), ALT_T(KC_P), + KC_LCTL, KC_A, KC_S, LT(2, KC_D), KC_F, KC_G, KC_H, KC_J, LT(2, KC_K), KC_L, KC_SCLN, KC_ENT, + KC_LSFT, KC_Z, GUI_T(KC_X), ALT_T(KC_C), LT(1, KC_V), KC_B, KC_N, LT(1, KC_M), KC_COMM, CTL_T(KC_DOT), KC_SLSH, KC_BSPC + ), + + LAYOUT( + KC_TRNS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, + KC_TRNS, KC_EQL, KC_LBRC, KC_SLSH, KC_MINS, KC_RO, KC_SCLN, KC_QUOT, KC_RBRC, KC_NUHS, KC_JYEN, KC_TRNS, + KC_TRNS, KC_LSFT, KC_LGUI, KC_LALT, KC_LANG2, KC_LSFT, KC_SPC, KC_LANG1, KC_TRNS, KC_TRNS, KC_DEL, KC_TRNS + ), + + LAYOUT( + KC_TRNS, KC_ESC, KC_TAB, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_UP, KC_NO, KC_NO, + KC_TRNS, KC_LCTL, LALT(KC_C), KC_QUES, KC_EXLM, KC_NO, KC_NO, KC_LEFT, KC_DOWN, KC_RGHT, KC_NO, KC_TRNS, + KC_TRNS, KC_LSFT, KC_LGUI, KC_LALT, KC_LANG2, KC_TRNS, KC_TRNS, KC_LANG1, KC_NO, MO(3), KC_DEL, KC_TRNS + ), + + LAYOUT( + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, + KC_TRNS, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_TRNS, + KC_TRNS, RGB_M_K, RGB_M_X, RGB_M_G, RGB_M_T, RGB_M_T, KC_F11, KC_F12, KC_CAPS, KC_NO, KC_NO, KC_TRNS + ), + + LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; + +bool encoder_update_user(uint8_t index, bool clockwise) { + + if (clockwise) { + tap_code(KC_MS_WH_UP); + } else { + tap_code(KC_MS_WH_DOWN); + } + + return true; +} + diff --git a/keyboards/takashicompany/qoolee/keymaps/via/rules.mk b/keyboards/takashicompany/qoolee/keymaps/via/rules.mk new file mode 100644 index 0000000000..036bd6d1c3 --- /dev/null +++ b/keyboards/takashicompany/qoolee/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes \ No newline at end of file diff --git a/keyboards/takashicompany/qoolee/qoolee.c b/keyboards/takashicompany/qoolee/qoolee.c new file mode 100644 index 0000000000..5a86c3c5bf --- /dev/null +++ b/keyboards/takashicompany/qoolee/qoolee.c @@ -0,0 +1,17 @@ +/* Copyright 2021 takashicompany + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "qoolee.h" diff --git a/keyboards/takashicompany/qoolee/qoolee.h b/keyboards/takashicompany/qoolee/qoolee.h new file mode 100644 index 0000000000..986e7e3ec3 --- /dev/null +++ b/keyboards/takashicompany/qoolee/qoolee.h @@ -0,0 +1,37 @@ +/* Copyright 2021 takashicompany + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + k00, k01, k02, k03, k04, k05, k07, k08, k09, k0a, k0b, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b \ +) { \ + { k00, k01, k02, k03, k04, k05, k07, k08, k09, k0a, k0b, KC_NO }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b } \ +} diff --git a/keyboards/takashicompany/qoolee/readme.md b/keyboards/takashicompany/qoolee/readme.md new file mode 100644 index 0000000000..35ee431c1c --- /dev/null +++ b/keyboards/takashicompany/qoolee/readme.md @@ -0,0 +1,30 @@ +# qoolee + +![qoolee](https://github.com/takashicompany/qoolee/raw/master/images/qmk.jpg?raw=true) + +QooLee is a keyboard with a 30% layout with ISO Enter. +It can also be equipped with a rotary encoder. +It supports hot-swapping of keyswitches with MX sockets and mounting of LEDs. +VIA (Remap) firmware is also available. + +* Keyboard Maintainer: [takashicompany](https://github.com/takashicompany) +* Hardware Supported: PCB, Pro Micro +* Hardware Availability: https://github.com/takashicompany/qoolee + +Make example for this keyboard (after setting up your build environment): + + make takashicomoany/qoolee:default + +Flashing example for this keyboard: + + make takashicompany/qoolee:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available diff --git a/keyboards/takashicompany/qoolee/rules.mk b/keyboards/takashicompany/qoolee/rules.mk new file mode 100644 index 0000000000..314fa98118 --- /dev/null +++ b/keyboards/takashicompany/qoolee/rules.mk @@ -0,0 +1,23 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = caterina + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output + +ENCODER_ENABLE = yes \ No newline at end of file From fe0acdd2cba8ddd1dfd441f461c80e87a0e5a62d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Mateusz=20=C5=BB?= Date: Sun, 31 Oct 2021 09:21:20 +0100 Subject: [PATCH 377/595] [CLI] Fix broken layout rendering in `qmk info` by '\n' (#14970) --- lib/python/qmk/info.py | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/lib/python/qmk/info.py b/lib/python/qmk/info.py index 350e5e2178..85131b9299 100644 --- a/lib/python/qmk/info.py +++ b/lib/python/qmk/info.py @@ -99,6 +99,12 @@ def info_json(keyboard): # Check that the reported matrix size is consistent with the actual matrix size _check_matrix(info_data) + # Remove newline characters from layout labels + for layout_name, layout_json in layouts.items(): + for key in layout_json['layout']: + if '\n' in key['label']: + key['label'] = key['label'].split('\n')[0] + return info_data From 928d9f90ec169f49f50c1566132b06adcaf662d7 Mon Sep 17 00:00:00 2001 From: Ryan Date: Mon, 1 Nov 2021 09:27:54 +1100 Subject: [PATCH 378/595] Remove complex `fn_actions` macros (#14662) * Remove complex `fn_actions` macros * Remove additional `KC_FN*` instances --- .../40percentclub/ut47/keymaps/rgb/keymap.c | 4 +- keyboards/hotdox/keymaps/default/keymap.c | 2 +- keyboards/hotdox/keymaps/via/keymap.c | 2 +- keyboards/kinesis/keymaps/default/keymap.c | 2 +- .../kinesis/keymaps/default_pretty/keymap.c | 2 +- keyboards/kinesis/keymaps/dvorak/keymap.c | 2 +- keyboards/kinesis/keymaps/stapelberg/keymap.c | 2 +- keyboards/kinesis/keymaps/tw1t611/keymap.c | 2 +- .../ud_40_ortho/keymaps/via/keymap.c | 2 +- keyboards/planck/keymaps/yale/keymap.c | 4 +- layouts/community/ergodox/algernon/COPYING | 674 ---------- layouts/community/ergodox/algernon/NEWS.md | 229 ---- layouts/community/ergodox/algernon/config.h | 22 - .../ergodox/algernon/images/adore-layer.png | Bin 105611 -> 0 bytes .../ergodox/algernon/images/base-layer.png | Bin 106956 -> 0 bytes .../ergodox/algernon/images/heatmap.png | Bin 139351 -> 0 bytes .../ergodox/algernon/images/steno-layer.png | Bin 64086 -> 0 bytes layouts/community/ergodox/algernon/keymap.c | 1194 ----------------- layouts/community/ergodox/algernon/readme.md | 152 --- layouts/community/ergodox/algernon/rules.mk | 43 - .../algernon/tools/heatmap-layout.ADORE.json | 486 ------- .../algernon/tools/heatmap-layout.Dvorak.json | 477 ------- .../ergodox/algernon/tools/hid-commands | 113 -- .../ergodox/algernon/tools/log-to-heatmap.py | 342 ----- .../ergodox/algernon/tools/text-to-log.py | 106 -- layouts/community/ergodox/dragon788/keymap.c | 2 +- .../community/ergodox/dvorak_plover/keymap.c | 2 +- layouts/community/ergodox/haegin/keymap.c | 2 +- layouts/community/ergodox/kines-ish/keymap.c | 2 +- layouts/community/ergodox/mpiechotka/keymap.c | 127 +- layouts/community/ergodox/ordinary/keymap.c | 288 +--- .../community/ergodox/ordinary_osx/keymap.c | 288 +--- .../keymap.c | 89 +- layouts/community/ergodox/plover/keymap.c | 2 +- layouts/community/ergodox/plums/keymap.c | 84 +- layouts/community/ergodox/teckinesis/keymap.c | 277 +--- .../ergodox/workman_osx_mdw/keymap.c | 390 +++--- 37 files changed, 379 insertions(+), 5036 deletions(-) delete mode 100644 layouts/community/ergodox/algernon/COPYING delete mode 100644 layouts/community/ergodox/algernon/NEWS.md delete mode 100644 layouts/community/ergodox/algernon/config.h delete mode 100644 layouts/community/ergodox/algernon/images/adore-layer.png delete mode 100644 layouts/community/ergodox/algernon/images/base-layer.png delete mode 100644 layouts/community/ergodox/algernon/images/heatmap.png delete mode 100644 layouts/community/ergodox/algernon/images/steno-layer.png delete mode 100644 layouts/community/ergodox/algernon/keymap.c delete mode 100644 layouts/community/ergodox/algernon/readme.md delete mode 100644 layouts/community/ergodox/algernon/rules.mk delete mode 100644 layouts/community/ergodox/algernon/tools/heatmap-layout.ADORE.json delete mode 100644 layouts/community/ergodox/algernon/tools/heatmap-layout.Dvorak.json delete mode 100755 layouts/community/ergodox/algernon/tools/hid-commands delete mode 100755 layouts/community/ergodox/algernon/tools/log-to-heatmap.py delete mode 100755 layouts/community/ergodox/algernon/tools/text-to-log.py diff --git a/keyboards/40percentclub/ut47/keymaps/rgb/keymap.c b/keyboards/40percentclub/ut47/keymaps/rgb/keymap.c index 77fa5b4017..ae8ad3e378 100644 --- a/keyboards/40percentclub/ut47/keymaps/rgb/keymap.c +++ b/keyboards/40percentclub/ut47/keymaps/rgb/keymap.c @@ -43,8 +43,8 @@ LAYOUT( ), LAYOUT( - KC_FN6, KC_FN7, KC_FN8, KC_FN9, KC_FN10, KC_FN11, KC_FN12, KC_FN13, KC_FN14, KC_FN15, KC_FN16, KC_DELETE, - _______, _______, _______, _______, _______, _______, _______, KC_FN17, KC_FN18, KC_FN19, KC_FN20, KC_FN21, + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_DELETE, + _______, _______, _______, _______, _______, _______, _______, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, _______, _______, _______, _______, KC_CAPS, _______, _______, _______, KC_HOME, KC_PGDN, KC_PGUP, KC_END ), diff --git a/keyboards/hotdox/keymaps/default/keymap.c b/keyboards/hotdox/keymaps/default/keymap.c index 3d6f040f34..fe07e6f91d 100644 --- a/keyboards/hotdox/keymaps/default/keymap.c +++ b/keyboards/hotdox/keymaps/default/keymap.c @@ -49,7 +49,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT), MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, - KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, + KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_NO, KC_LALT, CTL_T(KC_ESC), KC_PGUP, KC_PGDN,KC_TAB,KC_ENT diff --git a/keyboards/hotdox/keymaps/via/keymap.c b/keyboards/hotdox/keymaps/via/keymap.c index 5cfad55ddd..df951542a6 100644 --- a/keyboards/hotdox/keymaps/via/keymap.c +++ b/keyboards/hotdox/keymaps/via/keymap.c @@ -50,7 +50,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, KC_H, KC_J, KC_K, KC_L, LT(MDIA, KC_SCLN),GUI_T(KC_QUOT), MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, CTL_T(KC_SLSH), KC_RSFT, - KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN1, + KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_NO, KC_LALT, CTL_T(KC_ESC), KC_PGUP, KC_PGDN,KC_TAB,KC_ENT diff --git a/keyboards/kinesis/keymaps/default/keymap.c b/keyboards/kinesis/keymaps/default/keymap.c index 2d43aad077..d46a07cacf 100644 --- a/keyboards/kinesis/keymaps/default/keymap.c +++ b/keyboards/kinesis/keymaps/default/keymap.c @@ -40,7 +40,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL,KC_LALT, KC_HOME, KC_BSPC,KC_DEL ,KC_END , - KC_F9 ,KC_F10 ,KC_F11 ,KC_F12 ,KC_PSCR ,KC_SLCK ,KC_PAUS, KC_FN0, RESET, + KC_F9 ,KC_F10 ,KC_F11 ,KC_F12 ,KC_PSCR ,KC_SLCK ,KC_PAUS, KC_NO, RESET, KC_6 ,KC_7 ,KC_8 ,KC_9 ,KC_0 ,KC_MINS, KC_Y ,KC_U ,KC_I ,KC_O ,KC_P ,KC_BSLS, KC_H ,KC_J ,KC_K ,KC_L ,KC_SCLN,KC_QUOT, diff --git a/keyboards/kinesis/keymaps/default_pretty/keymap.c b/keyboards/kinesis/keymaps/default_pretty/keymap.c index 9c01b222a7..94102a8067 100644 --- a/keyboards/kinesis/keymaps/default_pretty/keymap.c +++ b/keyboards/kinesis/keymaps/default_pretty/keymap.c @@ -32,7 +32,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [QWERTY] = LAYOUT_pretty( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, KC_FN0, RESET, + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, KC_NO, RESET, KC_EQL, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, diff --git a/keyboards/kinesis/keymaps/dvorak/keymap.c b/keyboards/kinesis/keymaps/dvorak/keymap.c index 3c532628ef..6f4d63a7d4 100644 --- a/keyboards/kinesis/keymaps/dvorak/keymap.c +++ b/keyboards/kinesis/keymaps/dvorak/keymap.c @@ -17,7 +17,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_HOME, KC_BSPC, KC_DEL, KC_END, // right hand - KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, KC_FN0, RESET, + KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, KC_NO, RESET, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_F, KC_G, KC_C, KC_R, KC_L, KC_SLSH, KC_D, KC_H, KC_T, KC_N, KC_S, KC_BSLS, diff --git a/keyboards/kinesis/keymaps/stapelberg/keymap.c b/keyboards/kinesis/keymaps/stapelberg/keymap.c index c62ffbbccf..d7a0a5e5c2 100644 --- a/keyboards/kinesis/keymaps/stapelberg/keymap.c +++ b/keyboards/kinesis/keymaps/stapelberg/keymap.c @@ -56,7 +56,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL,KC_LALT, KC_LGUI, KC_BSPC,KC_ESC ,KC_END , - KC_F9 ,KC_F10 ,KC_F11 ,KC_F12 ,KC_PSCR ,KC_SLCK ,KC_PAUS, KC_FN0, RESET, + KC_F9 ,KC_F10 ,KC_F11 ,KC_F12 ,KC_PSCR ,KC_SLCK ,KC_PAUS, KC_NO, RESET, KC_6 ,KC_7 ,KC_8 ,KC_9 ,KC_0 ,KC_MINS, KC_Y ,KC_U ,KC_I ,KC_O ,KC_P ,KC_BSLS, KC_H ,KC_J ,KC_K ,KC_L ,KC_SCLN,KC_QUOT, diff --git a/keyboards/kinesis/keymaps/tw1t611/keymap.c b/keyboards/kinesis/keymaps/tw1t611/keymap.c index c94f06bbb9..e7a6ffd6e9 100644 --- a/keyboards/kinesis/keymaps/tw1t611/keymap.c +++ b/keyboards/kinesis/keymaps/tw1t611/keymap.c @@ -15,7 +15,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_RCTL,KC_LALT, KC_HOME, KC_SPC ,KC_LSFT,KC_BSPC , - KC_F9 ,KC_F10 ,KC_F11 ,KC_F12 ,KC_PSCR,KC_SLCK,KC_PAUS,KC_FN0 ,RESET, + KC_F9 ,KC_F10 ,KC_F11 ,KC_F12 ,KC_PSCR,KC_SLCK,KC_PAUS,KC_NO ,RESET, KC_6 ,KC_7 ,KC_8 ,KC_9 ,KC_0 ,DE_SS , KC_Y ,KC_U ,KC_I ,KC_O ,KC_P ,DE_ADIA, KC_H ,KC_J ,KC_K ,KC_L ,DE_SLSH,DE_ODIA, diff --git a/keyboards/mechstudio/ud_40_ortho/keymaps/via/keymap.c b/keyboards/mechstudio/ud_40_ortho/keymaps/via/keymap.c index c61bec5a05..affc42c7bb 100644 --- a/keyboards/mechstudio/ud_40_ortho/keymaps/via/keymap.c +++ b/keyboards/mechstudio/ud_40_ortho/keymaps/via/keymap.c @@ -20,7 +20,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, - _______, KC_LCTRL, KC_LALT, KC_LGUI, KC_FN13, KC_SPC, KC_SPC, KC_FN23, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT), + _______, KC_LCTRL, KC_LALT, KC_LGUI, KC_NO, KC_SPC, KC_SPC, KC_NO, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT), [1] = LAYOUT_ortho_4x12( KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, diff --git a/keyboards/planck/keymaps/yale/keymap.c b/keyboards/planck/keymaps/yale/keymap.c index 60bbc758d7..0baa24bdb7 100644 --- a/keyboards/planck/keymaps/yale/keymap.c +++ b/keyboards/planck/keymaps/yale/keymap.c @@ -68,9 +68,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), [_NAV] = LAYOUT_planck_grid( - KC_MS_ACCEL2, KC_FN1, KC_FN2, KC_FN3, KC_FN4, XXXXXXX, XXXXXXX, KC_WH_D, KC_WH_U, XXXXXXX, XXXXXXX, XXXXXXX, + KC_MS_ACCEL2, KC_NO, KC_NO, KC_NO, KC_NO, XXXXXXX, XXXXXXX, KC_WH_D, KC_WH_U, XXXXXXX, XXXXXXX, XXXXXXX, KC_MS_ACCEL1, KC_MS_BTN4, KC_MS_BTN3, KC_MS_BTN2, KC_MS_BTN1, XXXXXXX, KC_MS_LEFT, KC_MS_DOWN, KC_MS_UP, KC_MS_RIGHT, XXXXXXX, XXXXXXX, - KC_MS_ACCEL0, KC_FN9, KC_FN10, KC_FN11, KC_FN12, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + KC_MS_ACCEL0, KC_NO, KC_NO, KC_NO, KC_NO, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX ), diff --git a/layouts/community/ergodox/algernon/COPYING b/layouts/community/ergodox/algernon/COPYING deleted file mode 100644 index 94a9ed024d..0000000000 --- a/layouts/community/ergodox/algernon/COPYING +++ /dev/null @@ -1,674 +0,0 @@ - GNU GENERAL PUBLIC LICENSE - Version 3, 29 June 2007 - - Copyright (C) 2007 Free Software Foundation, Inc. - Everyone is permitted to copy and distribute verbatim copies - of this license document, but changing it is not allowed. - - Preamble - - The GNU General Public License is a free, copyleft license for -software and other kinds of works. - - The licenses for most software and other practical works are designed -to take away your freedom to share and change the works. By contrast, -the GNU General Public License is intended to guarantee your freedom to -share and change all versions of a program--to make sure it remains free -software for all its users. We, the Free Software Foundation, use the -GNU General Public License for most of our software; it applies also to -any other work released this way by its authors. You can apply it to -your programs, too. - - When we speak of free software, we are referring to freedom, not -price. Our General Public Licenses are designed to make sure that you -have the freedom to distribute copies of free software (and charge for -them if you wish), that you receive source code or can get it if you -want it, that you can change the software or use pieces of it in new -free programs, and that you know you can do these things. - - To protect your rights, we need to prevent others from denying you -these rights or asking you to surrender the rights. Therefore, you have -certain responsibilities if you distribute copies of the software, or if -you modify it: responsibilities to respect the freedom of others. - - For example, if you distribute copies of such a program, whether -gratis or for a fee, you must pass on to the recipients the same -freedoms that you received. You must make sure that they, too, receive -or can get the source code. And you must show them these terms so they -know their rights. - - Developers that use the GNU GPL protect your rights with two steps: -(1) assert copyright on the software, and (2) offer you this License -giving you legal permission to copy, distribute and/or modify it. - - For the developers' and authors' protection, the GPL clearly explains -that there is no warranty for this free software. For both users' and -authors' sake, the GPL requires that modified versions be marked as -changed, so that their problems will not be attributed erroneously to -authors of previous versions. - - Some devices are designed to deny users access to install or run -modified versions of the software inside them, although the manufacturer -can do so. This is fundamentally incompatible with the aim of -protecting users' freedom to change the software. The systematic -pattern of such abuse occurs in the area of products for individuals to -use, which is precisely where it is most unacceptable. Therefore, we -have designed this version of the GPL to prohibit the practice for those -products. If such problems arise substantially in other domains, we -stand ready to extend this provision to those domains in future versions -of the GPL, as needed to protect the freedom of users. - - Finally, every program is threatened constantly by software patents. -States should not allow patents to restrict development and use of -software on general-purpose computers, but in those that do, we wish to -avoid the special danger that patents applied to a free program could -make it effectively proprietary. To prevent this, the GPL assures that -patents cannot be used to render the program non-free. - - The precise terms and conditions for copying, distribution and -modification follow. - - TERMS AND CONDITIONS - - 0. Definitions. - - "This License" refers to version 3 of the GNU General Public License. - - "Copyright" also means copyright-like laws that apply to other kinds of -works, such as semiconductor masks. - - "The Program" refers to any copyrightable work licensed under this -License. Each licensee is addressed as "you". "Licensees" and -"recipients" may be individuals or organizations. - - To "modify" a work means to copy from or adapt all or part of the work -in a fashion requiring copyright permission, other than the making of an -exact copy. The resulting work is called a "modified version" of the -earlier work or a work "based on" the earlier work. - - A "covered work" means either the unmodified Program or a work based -on the Program. - - To "propagate" a work means to do anything with it that, without -permission, would make you directly or secondarily liable for -infringement under applicable copyright law, except executing it on a -computer or modifying a private copy. Propagation includes copying, -distribution (with or without modification), making available to the -public, and in some countries other activities as well. - - To "convey" a work means any kind of propagation that enables other -parties to make or receive copies. Mere interaction with a user through -a computer network, with no transfer of a copy, is not conveying. - - An interactive user interface displays "Appropriate Legal Notices" -to the extent that it includes a convenient and prominently visible -feature that (1) displays an appropriate copyright notice, and (2) -tells the user that there is no warranty for the work (except to the -extent that warranties are provided), that licensees may convey the -work under this License, and how to view a copy of this License. If -the interface presents a list of user commands or options, such as a -menu, a prominent item in the list meets this criterion. - - 1. Source Code. - - The "source code" for a work means the preferred form of the work -for making modifications to it. "Object code" means any non-source -form of a work. - - A "Standard Interface" means an interface that either is an official -standard defined by a recognized standards body, or, in the case of -interfaces specified for a particular programming language, one that -is widely used among developers working in that language. - - The "System Libraries" of an executable work include anything, other -than the work as a whole, that (a) is included in the normal form of -packaging a Major Component, but which is not part of that Major -Component, and (b) serves only to enable use of the work with that -Major Component, or to implement a Standard Interface for which an -implementation is available to the public in source code form. A -"Major Component", in this context, means a major essential component -(kernel, window system, and so on) of the specific operating system -(if any) on which the executable work runs, or a compiler used to -produce the work, or an object code interpreter used to run it. - - The "Corresponding Source" for a work in object code form means all -the source code needed to generate, install, and (for an executable -work) run the object code and to modify the work, including scripts to -control those activities. However, it does not include the work's -System Libraries, or general-purpose tools or generally available free -programs which are used unmodified in performing those activities but -which are not part of the work. For example, Corresponding Source -includes interface definition files associated with source files for -the work, and the source code for shared libraries and dynamically -linked subprograms that the work is specifically designed to require, -such as by intimate data communication or control flow between those -subprograms and other parts of the work. - - The Corresponding Source need not include anything that users -can regenerate automatically from other parts of the Corresponding -Source. - - The Corresponding Source for a work in source code form is that -same work. - - 2. Basic Permissions. - - All rights granted under this License are granted for the term of -copyright on the Program, and are irrevocable provided the stated -conditions are met. This License explicitly affirms your unlimited -permission to run the unmodified Program. The output from running a -covered work is covered by this License only if the output, given its -content, constitutes a covered work. This License acknowledges your -rights of fair use or other equivalent, as provided by copyright law. - - You may make, run and propagate covered works that you do not -convey, without conditions so long as your license otherwise remains -in force. You may convey covered works to others for the sole purpose -of having them make modifications exclusively for you, or provide you -with facilities for running those works, provided that you comply with -the terms of this License in conveying all material for which you do -not control copyright. Those thus making or running the covered works -for you must do so exclusively on your behalf, under your direction -and control, on terms that prohibit them from making any copies of -your copyrighted material outside their relationship with you. - - Conveying under any other circumstances is permitted solely under -the conditions stated below. Sublicensing is not allowed; section 10 -makes it unnecessary. - - 3. Protecting Users' Legal Rights From Anti-Circumvention Law. - - No covered work shall be deemed part of an effective technological -measure under any applicable law fulfilling obligations under article -11 of the WIPO copyright treaty adopted on 20 December 1996, or -similar laws prohibiting or restricting circumvention of such -measures. - - When you convey a covered work, you waive any legal power to forbid -circumvention of technological measures to the extent such circumvention -is effected by exercising rights under this License with respect to -the covered work, and you disclaim any intention to limit operation or -modification of the work as a means of enforcing, against the work's -users, your or third parties' legal rights to forbid circumvention of -technological measures. - - 4. Conveying Verbatim Copies. - - You may convey verbatim copies of the Program's source code as you -receive it, in any medium, provided that you conspicuously and -appropriately publish on each copy an appropriate copyright notice; -keep intact all notices stating that this License and any -non-permissive terms added in accord with section 7 apply to the code; -keep intact all notices of the absence of any warranty; and give all -recipients a copy of this License along with the Program. - - You may charge any price or no price for each copy that you convey, -and you may offer support or warranty protection for a fee. - - 5. Conveying Modified Source Versions. - - You may convey a work based on the Program, or the modifications to -produce it from the Program, in the form of source code under the -terms of section 4, provided that you also meet all of these conditions: - - a) The work must carry prominent notices stating that you modified - it, and giving a relevant date. - - b) The work must carry prominent notices stating that it is - released under this License and any conditions added under section - 7. This requirement modifies the requirement in section 4 to - "keep intact all notices". - - c) You must license the entire work, as a whole, under this - License to anyone who comes into possession of a copy. This - License will therefore apply, along with any applicable section 7 - additional terms, to the whole of the work, and all its parts, - regardless of how they are packaged. This License gives no - permission to license the work in any other way, but it does not - invalidate such permission if you have separately received it. - - d) If the work has interactive user interfaces, each must display - Appropriate Legal Notices; however, if the Program has interactive - interfaces that do not display Appropriate Legal Notices, your - work need not make them do so. - - A compilation of a covered work with other separate and independent -works, which are not by their nature extensions of the covered work, -and which are not combined with it such as to form a larger program, -in or on a volume of a storage or distribution medium, is called an -"aggregate" if the compilation and its resulting copyright are not -used to limit the access or legal rights of the compilation's users -beyond what the individual works permit. Inclusion of a covered work -in an aggregate does not cause this License to apply to the other -parts of the aggregate. - - 6. Conveying Non-Source Forms. - - You may convey a covered work in object code form under the terms -of sections 4 and 5, provided that you also convey the -machine-readable Corresponding Source under the terms of this License, -in one of these ways: - - a) Convey the object code in, or embodied in, a physical product - (including a physical distribution medium), accompanied by the - Corresponding Source fixed on a durable physical medium - customarily used for software interchange. - - b) Convey the object code in, or embodied in, a physical product - (including a physical distribution medium), accompanied by a - written offer, valid for at least three years and valid for as - long as you offer spare parts or customer support for that product - model, to give anyone who possesses the object code either (1) a - copy of the Corresponding Source for all the software in the - product that is covered by this License, on a durable physical - medium customarily used for software interchange, for a price no - more than your reasonable cost of physically performing this - conveying of source, or (2) access to copy the - Corresponding Source from a network server at no charge. - - c) Convey individual copies of the object code with a copy of the - written offer to provide the Corresponding Source. This - alternative is allowed only occasionally and noncommercially, and - only if you received the object code with such an offer, in accord - with subsection 6b. - - d) Convey the object code by offering access from a designated - place (gratis or for a charge), and offer equivalent access to the - Corresponding Source in the same way through the same place at no - further charge. You need not require recipients to copy the - Corresponding Source along with the object code. If the place to - copy the object code is a network server, the Corresponding Source - may be on a different server (operated by you or a third party) - that supports equivalent copying facilities, provided you maintain - clear directions next to the object code saying where to find the - Corresponding Source. Regardless of what server hosts the - Corresponding Source, you remain obligated to ensure that it is - available for as long as needed to satisfy these requirements. - - e) Convey the object code using peer-to-peer transmission, provided - you inform other peers where the object code and Corresponding - Source of the work are being offered to the general public at no - charge under subsection 6d. - - A separable portion of the object code, whose source code is excluded -from the Corresponding Source as a System Library, need not be -included in conveying the object code work. - - A "User Product" is either (1) a "consumer product", which means any -tangible personal property which is normally used for personal, family, -or household purposes, or (2) anything designed or sold for incorporation -into a dwelling. In determining whether a product is a consumer product, -doubtful cases shall be resolved in favor of coverage. For a particular -product received by a particular user, "normally used" refers to a -typical or common use of that class of product, regardless of the status -of the particular user or of the way in which the particular user -actually uses, or expects or is expected to use, the product. A product -is a consumer product regardless of whether the product has substantial -commercial, industrial or non-consumer uses, unless such uses represent -the only significant mode of use of the product. - - "Installation Information" for a User Product means any methods, -procedures, authorization keys, or other information required to install -and execute modified versions of a covered work in that User Product from -a modified version of its Corresponding Source. The information must -suffice to ensure that the continued functioning of the modified object -code is in no case prevented or interfered with solely because -modification has been made. - - If you convey an object code work under this section in, or with, or -specifically for use in, a User Product, and the conveying occurs as -part of a transaction in which the right of possession and use of the -User Product is transferred to the recipient in perpetuity or for a -fixed term (regardless of how the transaction is characterized), the -Corresponding Source conveyed under this section must be accompanied -by the Installation Information. But this requirement does not apply -if neither you nor any third party retains the ability to install -modified object code on the User Product (for example, the work has -been installed in ROM). - - The requirement to provide Installation Information does not include a -requirement to continue to provide support service, warranty, or updates -for a work that has been modified or installed by the recipient, or for -the User Product in which it has been modified or installed. Access to a -network may be denied when the modification itself materially and -adversely affects the operation of the network or violates the rules and -protocols for communication across the network. - - Corresponding Source conveyed, and Installation Information provided, -in accord with this section must be in a format that is publicly -documented (and with an implementation available to the public in -source code form), and must require no special password or key for -unpacking, reading or copying. - - 7. Additional Terms. - - "Additional permissions" are terms that supplement the terms of this -License by making exceptions from one or more of its conditions. -Additional permissions that are applicable to the entire Program shall -be treated as though they were included in this License, to the extent -that they are valid under applicable law. If additional permissions -apply only to part of the Program, that part may be used separately -under those permissions, but the entire Program remains governed by -this License without regard to the additional permissions. - - When you convey a copy of a covered work, you may at your option -remove any additional permissions from that copy, or from any part of -it. (Additional permissions may be written to require their own -removal in certain cases when you modify the work.) You may place -additional permissions on material, added by you to a covered work, -for which you have or can give appropriate copyright permission. - - Notwithstanding any other provision of this License, for material you -add to a covered work, you may (if authorized by the copyright holders of -that material) supplement the terms of this License with terms: - - a) Disclaiming warranty or limiting liability differently from the - terms of sections 15 and 16 of this License; or - - b) Requiring preservation of specified reasonable legal notices or - author attributions in that material or in the Appropriate Legal - Notices displayed by works containing it; or - - c) Prohibiting misrepresentation of the origin of that material, or - requiring that modified versions of such material be marked in - reasonable ways as different from the original version; or - - d) Limiting the use for publicity purposes of names of licensors or - authors of the material; or - - e) Declining to grant rights under trademark law for use of some - trade names, trademarks, or service marks; or - - f) Requiring indemnification of licensors and authors of that - material by anyone who conveys the material (or modified versions of - it) with contractual assumptions of liability to the recipient, for - any liability that these contractual assumptions directly impose on - those licensors and authors. - - All other non-permissive additional terms are considered "further -restrictions" within the meaning of section 10. If the Program as you -received it, or any part of it, contains a notice stating that it is -governed by this License along with a term that is a further -restriction, you may remove that term. If a license document contains -a further restriction but permits relicensing or conveying under this -License, you may add to a covered work material governed by the terms -of that license document, provided that the further restriction does -not survive such relicensing or conveying. - - If you add terms to a covered work in accord with this section, you -must place, in the relevant source files, a statement of the -additional terms that apply to those files, or a notice indicating -where to find the applicable terms. - - Additional terms, permissive or non-permissive, may be stated in the -form of a separately written license, or stated as exceptions; -the above requirements apply either way. - - 8. Termination. - - You may not propagate or modify a covered work except as expressly -provided under this License. Any attempt otherwise to propagate or -modify it is void, and will automatically terminate your rights under -this License (including any patent licenses granted under the third -paragraph of section 11). - - However, if you cease all violation of this License, then your -license from a particular copyright holder is reinstated (a) -provisionally, unless and until the copyright holder explicitly and -finally terminates your license, and (b) permanently, if the copyright -holder fails to notify you of the violation by some reasonable means -prior to 60 days after the cessation. - - Moreover, your license from a particular copyright holder is -reinstated permanently if the copyright holder notifies you of the -violation by some reasonable means, this is the first time you have -received notice of violation of this License (for any work) from that -copyright holder, and you cure the violation prior to 30 days after -your receipt of the notice. - - Termination of your rights under this section does not terminate the -licenses of parties who have received copies or rights from you under -this License. If your rights have been terminated and not permanently -reinstated, you do not qualify to receive new licenses for the same -material under section 10. - - 9. Acceptance Not Required for Having Copies. - - You are not required to accept this License in order to receive or -run a copy of the Program. Ancillary propagation of a covered work -occurring solely as a consequence of using peer-to-peer transmission -to receive a copy likewise does not require acceptance. However, -nothing other than this License grants you permission to propagate or -modify any covered work. These actions infringe copyright if you do -not accept this License. Therefore, by modifying or propagating a -covered work, you indicate your acceptance of this License to do so. - - 10. Automatic Licensing of Downstream Recipients. - - Each time you convey a covered work, the recipient automatically -receives a license from the original licensors, to run, modify and -propagate that work, subject to this License. You are not responsible -for enforcing compliance by third parties with this License. - - An "entity transaction" is a transaction transferring control of an -organization, or substantially all assets of one, or subdividing an -organization, or merging organizations. If propagation of a covered -work results from an entity transaction, each party to that -transaction who receives a copy of the work also receives whatever -licenses to the work the party's predecessor in interest had or could -give under the previous paragraph, plus a right to possession of the -Corresponding Source of the work from the predecessor in interest, if -the predecessor has it or can get it with reasonable efforts. - - You may not impose any further restrictions on the exercise of the -rights granted or affirmed under this License. For example, you may -not impose a license fee, royalty, or other charge for exercise of -rights granted under this License, and you may not initiate litigation -(including a cross-claim or counterclaim in a lawsuit) alleging that -any patent claim is infringed by making, using, selling, offering for -sale, or importing the Program or any portion of it. - - 11. Patents. - - A "contributor" is a copyright holder who authorizes use under this -License of the Program or a work on which the Program is based. The -work thus licensed is called the contributor's "contributor version". - - A contributor's "essential patent claims" are all patent claims -owned or controlled by the contributor, whether already acquired or -hereafter acquired, that would be infringed by some manner, permitted -by this License, of making, using, or selling its contributor version, -but do not include claims that would be infringed only as a -consequence of further modification of the contributor version. For -purposes of this definition, "control" includes the right to grant -patent sublicenses in a manner consistent with the requirements of -this License. - - Each contributor grants you a non-exclusive, worldwide, royalty-free -patent license under the contributor's essential patent claims, to -make, use, sell, offer for sale, import and otherwise run, modify and -propagate the contents of its contributor version. - - In the following three paragraphs, a "patent license" is any express -agreement or commitment, however denominated, not to enforce a patent -(such as an express permission to practice a patent or covenant not to -sue for patent infringement). To "grant" such a patent license to a -party means to make such an agreement or commitment not to enforce a -patent against the party. - - If you convey a covered work, knowingly relying on a patent license, -and the Corresponding Source of the work is not available for anyone -to copy, free of charge and under the terms of this License, through a -publicly available network server or other readily accessible means, -then you must either (1) cause the Corresponding Source to be so -available, or (2) arrange to deprive yourself of the benefit of the -patent license for this particular work, or (3) arrange, in a manner -consistent with the requirements of this License, to extend the patent -license to downstream recipients. "Knowingly relying" means you have -actual knowledge that, but for the patent license, your conveying the -covered work in a country, or your recipient's use of the covered work -in a country, would infringe one or more identifiable patents in that -country that you have reason to believe are valid. - - If, pursuant to or in connection with a single transaction or -arrangement, you convey, or propagate by procuring conveyance of, a -covered work, and grant a patent license to some of the parties -receiving the covered work authorizing them to use, propagate, modify -or convey a specific copy of the covered work, then the patent license -you grant is automatically extended to all recipients of the covered -work and works based on it. - - A patent license is "discriminatory" if it does not include within -the scope of its coverage, prohibits the exercise of, or is -conditioned on the non-exercise of one or more of the rights that are -specifically granted under this License. You may not convey a covered -work if you are a party to an arrangement with a third party that is -in the business of distributing software, under which you make payment -to the third party based on the extent of your activity of conveying -the work, and under which the third party grants, to any of the -parties who would receive the covered work from you, a discriminatory -patent license (a) in connection with copies of the covered work -conveyed by you (or copies made from those copies), or (b) primarily -for and in connection with specific products or compilations that -contain the covered work, unless you entered into that arrangement, -or that patent license was granted, prior to 28 March 2007. - - Nothing in this License shall be construed as excluding or limiting -any implied license or other defenses to infringement that may -otherwise be available to you under applicable patent law. - - 12. No Surrender of Others' Freedom. - - If conditions are imposed on you (whether by court order, agreement or -otherwise) that contradict the conditions of this License, they do not -excuse you from the conditions of this License. If you cannot convey a -covered work so as to satisfy simultaneously your obligations under this -License and any other pertinent obligations, then as a consequence you may -not convey it at all. For example, if you agree to terms that obligate you -to collect a royalty for further conveying from those to whom you convey -the Program, the only way you could satisfy both those terms and this -License would be to refrain entirely from conveying the Program. - - 13. Use with the GNU Affero General Public License. - - Notwithstanding any other provision of this License, you have -permission to link or combine any covered work with a work licensed -under version 3 of the GNU Affero General Public License into a single -combined work, and to convey the resulting work. The terms of this -License will continue to apply to the part which is the covered work, -but the special requirements of the GNU Affero General Public License, -section 13, concerning interaction through a network will apply to the -combination as such. - - 14. Revised Versions of this License. - - The Free Software Foundation may publish revised and/or new versions of -the GNU General Public License from time to time. Such new versions will -be similar in spirit to the present version, but may differ in detail to -address new problems or concerns. - - Each version is given a distinguishing version number. If the -Program specifies that a certain numbered version of the GNU General -Public License "or any later version" applies to it, you have the -option of following the terms and conditions either of that numbered -version or of any later version published by the Free Software -Foundation. If the Program does not specify a version number of the -GNU General Public License, you may choose any version ever published -by the Free Software Foundation. - - If the Program specifies that a proxy can decide which future -versions of the GNU General Public License can be used, that proxy's -public statement of acceptance of a version permanently authorizes you -to choose that version for the Program. - - Later license versions may give you additional or different -permissions. However, no additional obligations are imposed on any -author or copyright holder as a result of your choosing to follow a -later version. - - 15. Disclaimer of Warranty. - - THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY -APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT -HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY -OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, -THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR -PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM -IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF -ALL NECESSARY SERVICING, REPAIR OR CORRECTION. - - 16. Limitation of Liability. - - IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING -WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS -THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY -GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE -USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF -DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD -PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), -EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF -SUCH DAMAGES. - - 17. Interpretation of Sections 15 and 16. - - If the disclaimer of warranty and limitation of liability provided -above cannot be given local legal effect according to their terms, -reviewing courts shall apply local law that most closely approximates -an absolute waiver of all civil liability in connection with the -Program, unless a warranty or assumption of liability accompanies a -copy of the Program in return for a fee. - - END OF TERMS AND CONDITIONS - - How to Apply These Terms to Your New Programs - - If you develop a new program, and you want it to be of the greatest -possible use to the public, the best way to achieve this is to make it -free software which everyone can redistribute and change under these terms. - - To do so, attach the following notices to the program. It is safest -to attach them to the start of each source file to most effectively -state the exclusion of warranty; and each file should have at least -the "copyright" line and a pointer to where the full notice is found. - - - Copyright (C) - - This program is free software: you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation, either version 3 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program. If not, see . - -Also add information on how to contact you by electronic and paper mail. - - If the program does terminal interaction, make it output a short -notice like this when it starts in an interactive mode: - - Copyright (C) - This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'. - This is free software, and you are welcome to redistribute it - under certain conditions; type `show c' for details. - -The hypothetical commands `show w' and `show c' should show the appropriate -parts of the General Public License. Of course, your program's commands -might be different; for a GUI interface, you would use an "about box". - - You should also get your employer (if you work as a programmer) or school, -if any, to sign a "copyright disclaimer" for the program, if necessary. -For more information on this, and how to apply and follow the GNU GPL, see -. - - The GNU General Public License does not permit incorporating your program -into proprietary programs. If your program is a subroutine library, you -may consider it more useful to permit linking proprietary applications with -the library. If this is what you want to do, use the GNU Lesser General -Public License instead of this License. But first, please read -. diff --git a/layouts/community/ergodox/algernon/NEWS.md b/layouts/community/ergodox/algernon/NEWS.md deleted file mode 100644 index a6ce9813ba..0000000000 --- a/layouts/community/ergodox/algernon/NEWS.md +++ /dev/null @@ -1,229 +0,0 @@ - - -## v1.12 - -*2018-11-22* - -### Overall changes - -* Updated to work with QMK master. - -### Miscellaneous - -* The `😂` symbol can be entered with UCIS. -* `LEAD r` now inputs `Right Alt`. - -## v1.11 - -*2017-10-01* - -### Overall changes - -* Updated to work with QMK master. -* The `$` and `^` symbols on the number row were swapped on both the base and the ADORE layers. -* The bracket tap-dance keys can now be used to input Japanese brackets, `「` and `」` with a third tap. -* The second column of the top row on the right side will act as a "Social" application selector on the `AppSel` layer. -* The third key on the same column will select a password manager. -* The `GUI` key will now launch `rofi` when triple-tapped. - -### Miscellaneous - -* The `👶` symbol can be entered with UCIS. -* The `👪` symbol can be entered with UCIS. - -### Tools - -* `tools/hid-commands` can now find the `Mstdn`, not just `Slack`, as the "Slack"/chat app. -* `tools/hid-commands` can now find the Plex web app as a music/media player. -* `tools/hid-commands` now understands the "Social" application selector. It raises the `Mstdn` and `Tweetdeck` windows, but keeps focus on the previous window. -* `tools/hid-commands` now understands the "Social2" application selector, which raises `Signal` and `Viber`, but keeps focus on the previous window. -* `tools/hid-commands` is now able to select a password manager (KeePass*). -* `tools/hid-commands` can now run `rofi` when receiving an `appsel_helper` command (triggered by a triple-tapped `GUI` key). - -## v1.10 - -*2016-12-28* - -### Miscellaneous - -* `µ` can now be entered with UCIS. -* `™` can now be entered with UCIS. - -### Tools - -* `tools/hid-commands` can now find Banshee, and prefers it over Kodi. -* `tools/hid-commands` can now find Chrome too, not juts Chromium. - -## v1.9 - -*2016-10-16* - -### Overall changes - -* `F12` was replaced by an `Fx` key, that activate the **Media** layer as a one-shot layer, and also `Alt` as a one-shot modifier. - -### Base layer changes - -* The `Media Stop` key is now a tap-dance key, and resets the device for programming on the fourth tap. - -### Miscellaneous - -* `π` can now be entered with UCIS. -* `🐁` can now be entered with UCIS. - -### Tools - -* The `tools/layer-notify` tool was removed, it was an example, which I don't use. - -#### `tools/hid-commands` - -* Now looks at the `DISABLE_APPSEL_START` environment value, and does not display an AppSel notification if it is non-empty. -* Will attempt to re-program the keyboard when receiving a `reflash` command. -* No longer tries to select Emacs 24 on `APPSEL_EMACS`, rather, it goes for any Emacs. -* The `APPSEL_MUSIC` command now includes Kodi in the list too, as the last choice. - -## v1.8 - -*2016-10-03* - -### ADORE - -* Major rearrangements were made, to reduce pinky use, and to balance out the hand usage. - -### Tools - -* The `hid-commands` tool will now display a notification when the **AppSel** layer is triggered. -* The `log-to-heatmap.py` tool now treats the innermost keys on the bottom row as thumb keys, as far as statistics are concerned. - -### Miscellaneous - -* Fixed the **Steno** toggle key. - -## v1.7 - -*2016-09-18* - -### Overall changes - -* The number row has been completely rearranged on both the **Base** and the **ADORE** layers. -* The number/function key behavior was changed: function keys are now on the **Media**. -* The `:`/`;` and `-`/`_` keys were put back to their thumb position on the bottom row, on both the **Base** and **ADORE** layers. -* The bottom large keys on the inner side of each half now function as [tmux](http://tmux.github.io/) keys: the left to send the prefix, the right to send the `display-panes` key. The left also doubles as a GNU screen prefix key, and sends `C-a` when double tapped. -* A number of functions, such as the **AppSel** layer, now require the `hid-commands` tool to be running, with the output of `hid_listen` being piped to it. - -### ADORE - -* `Y` and `X` have been swapped again. - -### Media/Navigation layer - -* The function keys are now on this layer. -* Mouse keys have been removed. -* Media start/stop/prev/next have been removed. -* `Print screen` has been removed. -* There is only one screen lock key now. - -### Heatmap - -* Fixed a few issues in the finger-stats calculation. -* The tool now also timestamps and saves all input lines to a logfile, which it loads on start, allowing one to continue the collection after upgrading the tool. -* The heatmap tool will now colorize the stats by default. -* The periodic stats are now printed in a more compact format. - -### Tools - -* Added a new tool, `tools/layer-notify` that listens to layer change events on the HID console, and pops up a notification on layer changes. -* Another new tool, `tools/text-to-log.py` has been added that converts arbitrary text to a keylogger output, which can be fed to the heatmap generator. -* A number of features have been moved to the `tools/hid-commands` utility. These generally are OS dependent, and are easier to implement on the software side. - -## v1.6 - -*2016-08-24* - -### Base layer changes - -* The parentheses & bracket keys have been merged: tapping them results in `[` or `{` (if it was shifted), double tapping leads to `(`. -* The `:;` and `-_` keys are now available on the base layer, on their **ADORE** location, too, just below `[{(`/`]})`. -* The `Apps` key has been replaced by `F12`. -* The `-`/`_` is no longer a tap-dance key. - -### ADORE layer changes - -* Adjustments were made to the **ADORE** layer, to separate some inconvenient combinations. - -### Miscellaneous changes - -* `LEAD u` now starts the symbolic unicode input system, instead of the OS-one. -* The mouse acceleration keys on the **Navigation/Media** layer have been turned into toggles: tap them once to turn them on, until tapped again. Tapping an accelerator button will turn all the others off. -* When the **ARROW** layer is on, the *red* and *blue* LEDs light up now. - -### Heatmap - -* The built-in keylogger has been greatly enhanced, it now outputs the pressed state, and the layer (Dvorak or ADORE). As such, the `ADORE_AUTOLOG` option has been removed, instead there is `AUTOLOG_ENABLE` now, which when enabled, makes the keylogger start when the keyboard boots. It defaults to off. -* The heatmap generator received a lot of updates. - -## v1.5 - -*2016-08-12* - -* The **1HAND** layer has been removed. -* A `Delete` key is now available on the right thumb cluster. -* The **ADORE** layer received a major update, see the layout image above. -* It is now possible to enable automatic logging for the **ADORE** layer, by setting the `ADORE_AUTOLOG` makefile variable to `yes` when compiling the keymap. It is off by default. -* The `~` key and the `Media Next/Prev` key have been swapped on the **Base** layer. -* On the **ARROW** layer, `Backspace` has been replaced by `Enter`. -* There is some experimental support for entering Unicode symbols. - -## v1.4 - -*2016-07-29* - -* When toggling the key logging on or off, the LEDs will do a little dance. -* The keylogger is now optional, but enabled by default. Use `KEYLOGGER_ENABLE=no` on the `make` command line to disable it. -* The `TAB`/`ARRW` key was turned into a tap-dance key, allowing one to toggle the **ARROW** layer on by double-tapping, and as such, avoid the need to hold the key. -* The `-`/`_` key was turned into a tap-dance key too. -* There is now a way to travel time with the keyboard, toggle the feature on by hitting `LEAD t`. - -## v1.3 - -*2016-07-06* - -* Added support for logging keys, by pressing `LEAD d`. Also included is a tool to generate a *heatmap* out of the logs. -* The arrow and navigation keys were rearranged again, and now require an additional key being held to activate. See the **Base** layer for an image that shows where arrows are. -* The **experimental** layer has been redone, and is now called **ADORE**, and as such, can be enabled by `LEAD a` now. -* Switching between Dvorak and ADORE is now persisted into EEPROM, and survives a reboot. - -## v1.2 - -*2016-06-22* - -* The forced NKRO mode can be easily toggled off at compile-time, to make the firmware compatible with certain operating systems. -* The `:;` key has changed behaviour: to access the `;` symbol, the key needs to be double-tapped, instead of shifted. -* The `=` and `\` keys were swapped, `=` moved to the home row, on both the **Base** and the **experimental** layers. -* The arrow and navigation keys were redone, they are now more accessible, but the navigation keys require an extra tap to access. -* The **Emacs** layer is gone, replaced by a simplified **navigation and media** layer. -* `LEAD v` types the firmware version, and the keymap version. -* On the **experimental** layer, the `L` and `Q`, and the `K` and `G` keys were swapped. -* The **Steno** layer gained a few more `#` and `*` keys, to make it easier on my fingers. - -## v1.1 - -*2016-06-14* - -* The keyboard starts in NKRO mode, bootmagic and other things are disabled. -* A **Steno** layer was added, to be used with Plover. -* An **experimental** layer was added, something halfway between Dvorak and Capewell-Dvorak. A work in progress. -* `LEAD y` types `\o/`. -* Some keys on the **Base** layer have been moved around: - - `?` moved to the left pinky, left of `Q`. - - `=` shifted one row down, but `F11` stayed where it was. - - `-` on the left half was replaced by `Tab`. - - `Tab`'s original position is taken by a `Media Next`/`Media Prev` key. - - `:` now inputs `;` when shifted. -* `ESC` cancels the **Hungarian** layer too, not just modifiers. - -## v1.0 - -*2016-05-26* - -Initial version. diff --git a/layouts/community/ergodox/algernon/config.h b/layouts/community/ergodox/algernon/config.h deleted file mode 100644 index 583c3911f1..0000000000 --- a/layouts/community/ergodox/algernon/config.h +++ /dev/null @@ -1,22 +0,0 @@ -#pragma once - -#undef MOUSEKEY_TIME_TO_MAX -#undef MOUSEKEY_MAX_SPEED - -#define MOUSEKEY_TIME_TO_MAX 1 -#define MOUSEKEY_MAX_SPEED 2 - -#undef MOUSEKEY_DELAY -#define MOUSEKEY_DELAY 0 - -#undef MOUSEKEY_WHEEL_DELAY -#define MOUSEKEY_WHEEL_DELAY 0 - -#define ONESHOT_TAP_TOGGLE 2 -#define ONESHOT_TIMEOUT 3000 - -#undef LOCKING_SUPPORT_ENABLE -#undef LOCKING_RESYNC_ENABLE - -#undef LEADER_TIMEOUT -#define LEADER_TIMEOUT 1000 diff --git a/layouts/community/ergodox/algernon/images/adore-layer.png b/layouts/community/ergodox/algernon/images/adore-layer.png deleted file mode 100644 index 75d2ca4f08b23b8233b298b0a30cb62b4072f0a3..0000000000000000000000000000000000000000 GIT binary patch literal 0 HcmV?d00001 literal 105611 zcmZ^KbyQXFwl>`%z3FZQHr*)Qozk1`4y9|uh7Cx!lqiUlbT>$+NH+>dt8{#e-?`_0 zXN-IAUwaG&>s{}fJ)ikZn3jejE*1qA0s;cAvXYz*0s;yc0RgcL0}c3#g-J*e0siJ}8F*fhUq284ibnFcz>A97fSLz2GcBk6owW(1mg$X#Mt`)k$99MCkFDcdP$Hx#1o{^k&;I9+r4q{L%F5KE!$ZG-*ROGP{%~47#=>A{%1TNB4%XJz zCx?ePfq`4RIQyW3_-Aw|7>F`q|KrDt@oiq-*cH}Sn=dx3tRF|*+}wCX2)B1fGig^= zRt~ADsWJKgm&g9=EH$+7=4O%pp&{15z(BHOIXOA1w9(zwI1)}fKCBdm|Lf*2FxZ|2 z++I8ft}m>#z>R~Cj~^%|BNG|c$oVdq{rD*)$$9rH% z1m6(LL8dJKkI%+HOjQh1!b$ZfU|0IzWcws=97G1N1J(Z`_k zSzMDwmm+HNo0!};{~VQD*CtcHSj`neI=qtq*tuTl)4|e0JpOhx zIpq##uaCr_ZuNog}HX&WlvO|F14fJ`AlfJH9G9 zc?`skr-Rq%Kj4j#BPw9Hv{4~dFyOU}DQT!gm842?=$%F;R3<2Av#F~nQk_9`5K{j0T)(Gt{kR#UF~gC7a}~miN+_|Bkz8a}NY0Ih=bA6I9p>s2 zhY3Jf^5n^$f6t$bw2|r0bZAzd%Rz{tJ*q;4|8}!z48*uatmL}kIhiDcWKeVn#vXbY zHW~MxV$HkKMu%wzL;M4l{)IB7dWTh`$)!D(hu%d_kH4pLvHj2DyL@Ef$1Es5vUFR= zuI-PPh+M8N+Mn%Qo3C#6S*GA84`EDq@olk+R1zDokupS8qwHGw*7Apwc&4aMWoSYJ zN_sH0*3ztoaJY{!Jslkq1cu0FN93Wk_fl^SWP)$@_Nz?P)1|&H-UtZ_36b*KPxPlS zt8N?}CGgp{|6MIDJh$k01Iy&GfDFRPO+|J59L4BAe0Xo^Q*CbK`=_i>Y@Y$1)cOmK{Ule_IUeR5&Y5Vu2z2f2%x zDK@SK`PUb8e%lxiFF16*9QuWG-fW}K4Jk&WVcYHfKDAN1l_bV5V6|O*o{Ug=&}^+E zEiFRE-rlcKM1jHL@EK%{pl&VnBT=*uYBhFu4cJQe4k9wI{VYq#8|BsZ#@3=gSii{RHnViKjdbs%K}IK0W>#0!{hPzY%naF{m#^W0#2hU*Ime*)in&*ZJtEMbbrNv66- z)AQczcy5{QDUAM(fJ8IbTt-1D4cqTD`W2hMOYALe?cE)|!DrSDJ`b`}87yCF!4-+> z1>)SG$A8pqIBq67BT(#hKLZ^RI0KW!l@ zS=yG~a4w`}OBWhezXM6WsUOJ$i6*7CW8n^5*p5DHw#6346mtEJr@_sw;I9@!#IWq> zwY5TCzs9Rt`tJOXPnOX%NlkSosneaW--f`S<7w;?g#v%>zP?eL59{ zX{5<<6_Us#d5f;_XOkcKjZpB6psqEMSIYUxs*ioUZMD}o_qSE0XRbeWifJir3LWXY zAwu9mgq(gCEKN2gxc%cpymxpw=xSC|!I#itjAam%3lS>86RkVRQ^Kk9FLDHFRTw;n zQ%MnotfhOiGi82cq^GBupBJjB1y}NS>o{V~%)IyT^NW^Cxm8`L%fzpB8IXvIiaJdJ z&CKcH98V#-242XS`UrFu@C`8KrL0F8)!C{0yA4VZvQ!DU}Z*M|T}eJg?7#E;Ts$t(xn` ztdm^$YDsT3uR{87SyVzX1ScW^uN7cIc^T%q z+2(P7+^Ov{1Rm|R=o`SRJFH^$RtgMwAtilsTpI?UZ%wL9K7`{FvBLMsZvzf zD6G6WAv8dJFS>IN$`i1h?HzeLNjM!k5o}Jx#l>_L=!#s6k84g<7H&mg3C?};XNb`J zkKS5q%i3kuf?#NADy#R7{2AZiIQAe}9Sl4;!Q1e>3mS}5E=&z1BUwd+{R=geg{Xjs zIag+pHAThE5|;5fnq^+0ki)FeUCzvnA0JHP>TQ?Ds;z^VptY`A-=){1ME0kROHGIv z*Gshfe$>lR5|LLpI<@Q8G4o1 zl;0w31iNmIpfl(19DG(UPqyawV`XEvjrdRAX9?CH4a18)SoWFcN%Y=>5kA6_C`L~f z{9-oC^=MMMB=}_Ql-m%G=;mUe-E|p$%+#5s4hIV*gA{1}>?#43+8s&FYD-BIG8VQt zvU*};NhK8@)2LXI8W5H^5`i`-`C)@ zgi98FXSz)L!qKQ_?eQ5uDqdH#9%o6vZ_hT)>}rJsE5e4W?v!x66A=aI!7L&7f-+U6 zFH2uFG>6}v&Og_yGNVKuN>XgN`I~UTMVi*n`xBI_gj0emtnH)51Z7)s2x6>f1~V}9 z)mY7{m_CSS-M)F3OdnI=E{by>!u3h7%1SFTw*M88 zMK%4!k+@|y!u!$P)ACmY@}p@2pE{TP9v;4#v^PKUNUX#| zWJQp?&yhlc}9fSok|oym8|&iE&QlOMPRH z{m?{rMeEgX8l~ho9l^(z9G8wp;083Iz<-z z_B{SchDMa~%HMt_(QNLlbzFsfIa^njNd^U8xDHfF=F(-3PM=hqOxLw}CLQmRSrfsm z_>$6%Ib?tWv32}U+B~$snZ%2_E;Ku=CsLtAy#lYM=BwJL>&XPpEN~#z2emuY1PUSk ztYkSz84DQn+SBid6pp)+I3Rhu9dGf`TH_Z@mj5l1X?!60nDo+H5Eu;JNXfvXMELGD zp75dM8TAkimcr@$eRIGW18d^qH)pNTs|HuDsDP5;0KWq)jU&el1 z*|W(wW)+6Y!^0`NX%)T0HPx@jYOm%^+Ix}IWSM%?|9p-*07dRwlBi&fHb5RZU9Nvu zrnG$id@%R$;PCy$Yr||&2oWXaXh+Flum%2laPhllF#7U*{%PNmS&~;r;DFG_=9ZRn zNsSb5*1?6igwwu@Z>QB3%QmJTIbmm8XV!TObup^F6Q4%X|D0`l<&fVJM)X_u%g<)$ z6ZmlOmwPNH;yw$ysM1zvBiO!Vjq>kqHyrbr%q*UVaHvDRZCSlT! zZ7zgoiH*`yNkW06XO2@>$SkQJheO0^#bw0|cXj=uG?Itc(r87yaztHg13T}vu$XM= z-0ke}L-lWR>%D!X>75xw8*utAU+LZ%Q_k?$Y5KhTNqcp~AM#&*v(4O_PHe7X_c_-!!IGQtFDxw$;SCu?)yx;k!1QRaJ% zrlYf%s5<*4V|THkF1?#ivw`!&ZnJMGeeLg`YaNh0-3)HCPXw?t-M@CAR#(9wCw+eM zpZhA1EI9pZVuFbNx5G9LOJA@a@E($Gc|}4uaSm5~XUbRrL)N>JUlmOT75i0h!e`U^ zjoMwfM{Y7@hf{2MtuF!&SKbg$XmEq19og2pl6s*Hp@k>HX0G<{V7*k3 zRgw%?ypVGV_mT8+0?qn78yW2k-GUX6yOfmFUW=2^;Yj8PvjU5{tV$4rghX7={2;U% zJMw`${R0CZ2hv5AMorB~zLwy{V3&xLC!%6I&MRJAZmE`}!S|}Or}Xp$@66xT)bdxN zYQIw9U|?X_*w{iDmGFyR4UEdKBiml&|NQ`Qo(h-ACqQC>BZyx#o(N0NoyL!r+I|v1 z24n8C>5L&82+gzDB3?cOkwq7C8&I{R{l@ClMTxZQ-26v;@1#Sk2w>oH4NjcZMy%2b z13vO~0$B19R)&PMy9PW2xvg)09xtR5cPjm`mm7c5Pj z3MRK@l0g4x!_W;0o1^p%lMwGMhRkm2Ow;0-L$BG2Dy35xiU}U~*cEMdI+_ASWYX2&k zshaT^0mQ(bi3#)NA=$SVau5t8MojJSr^1K}<>d<^!bsP^lO;|BMLd*}p`VrD&eTkUHE${|6#yPcG zMpP5aF%epOsS$zTQ`kJFu|%j`3N1iUVUuz=w8BIFcNycEsRUyobXVOB^6Mxr?q0!g9oEf}e>UiuO z$HFuSPZIMI1xo~X2!_wlxn4oSdQ~8K62U0BO_eehAzvc2&qsteHzwxb@PyI^@okAmUbDI@0y1F<&z?@3{AexJ7TeD&U!D8}rgT4JgEK)}G8w+v zRM}v5I@dd+iYv}44~_~O0;SCM_jNlD@vN?WVdCob_Wtk4ZAETJP}6}fL<@ZIQoITg zp{$ED1M0#Lw@iBUgx0@aAz}{dki)eON?9n*%Ptyft%@|FppLXAOv)Jt-Q!=c3^dh@b!U0#o zysG|oKD47cWvEB{!`c<+;Xepde_h!ciMhorL4Li%ZkZnqigS{O)KF}|*)h$e9u+qCF0Z7Q?@r+6Wr3$(hgqc?ho#>Em8UF zxK!mfZ3608EoyeB-huxZicYGO<>*)C=D-7q6v%c9HMuMFkMIFE&Ifi2gc5B_zXw8% z%B9$^_B`NUCqybR)`T<5^F?_kD7alF7(h$HSTKm~2)FM}mXmKbk%fgdT<7rkxoM(H z8wA}@9$;-BBd0Q;R}Y70Qe|xc&Rz%S3-#sIg1ZrpmH_2mhLXu3ZHqcJAaE#VR zd?aLKK?bl?kkVFTbMV}I610m)L=BAz%N_aC0e&DW;teKcCz6gYA5_(o62|sxsY7<6 zv^?|Vu#NuCr~S*)E`l07SR#aucRKk5?{!*y%GYqT7_*+N4d;m9APE3J1>~QsO?+rl zF8TwmR<(2BnERt>r&$w5qWmiOqpv?)x)D3^*e$1*%|X0VR6eyuM=KhIaM0e+iW!U& zVdw$A9#}AI^CQ{Ki49+9Pkavbee)So$*Sn3f>xP%#8gwK&E3+uE2EeTNch`28|-C-eely_zKT6{JJcM zqP8-2&u%jia@D$1#qu^S2hL>EJ^Y<4gT(+zhb5h1^V(ZPnM;(9G1JUlhJd$7dTVP- zfC0SF!OlKR#UFIBg30tTXk%i=phAbJAb5$a!C8p+Dwd8gvY?;0S@(SZEl=1c_Lxld zYX9c-DDRs`JGriqc=^>^tBY@`Z;jZx)Nmbz3(Vvopc%?JGQdS0B41dsfc-S{62AO( zE(uA}$eL|M&&2pWmNR~O${u+-R1|P~Vl8m^ZD7MjbUm+E*wAS^RJL)qE?x;o_Dy70 z^&P~8jEoF0E)d7#VL7V%M1s z_Q_E%^Pn$4`@?*OpCM? z$tKLhD`GzCEK4o9(Z}{+a&nIB69La=rSFl(iQcf;Ghe&E8_$zWiGe?2B zWqJ{xfXE^}28@6-HI{IkpA5wZ(W=K#yI1{n@kmlXMm$Uo7G}VLYhg4cn&zP!(nAQd z%5mGyeKtVR9sBJm(Eb)>e7bz0hasz#1&KdAAL?H;IqlX@muFT-zWNb9(6_-^^QEC@ zNEXd<*HCsUWbX2`+HlmeFIoxiQf6JkFkRemMwsHfz)I70mb2eCYZEQGR*Ao;~uB^)9j&Sa1rB&)Y($NKMofAeNJ12yo?FG!H&AP6%% zX`gN0;ki{|h=!nDPMY;+V%tLo6{*3;U-4?XC=VD287Uo?U{+Yilsem zw!zz?ef@7(2>be}dgtf~Bb9J;K^bxoo4}Vi;%Y!rkNz0v^MvIyfD!b)M;@}VH#W_% zo}&fzyzEyQtg~jKg=}k;?kes{gfzcI2hIf?%BQ=0AFhPM0G>;b1vImXIbMSNU$^gf0}tffc%+@QeZc^lEKoCbWM&m|9kZ_m36J z=H$dFR8`f~j&n;dw_7XTwOYqO85N|*WBUO_NSaYqyj%|A5JT3$f-*(`Tv}}sz;sVj zL60ct+iiYFHPTEdAtam>-(W#tO6CiJPl0J-KRNwgz$CBl<;B5QV7>rs1~3*G?CfDx zJm^&u_e4jC>uGI`7^c8kf8+cm4`@#{=r~u^&i^2z4Rp)ida`= zQV@EdMugl<@`sG&?;bw3>Zqx8rR?L{l~oT;4PSV!{Uh|AQ^@jiyTZfIf7FTWQi=k* z^N~Q?y|4Dixo71d$5HN^Q#A~u z#5z~aMfG2G1_uW5yHQazIt@^xf5->rNIhR_Vtld%25^0-TiWs4;hnd`yEV0qI-EyV zdnR%UL*8A6+$LD>jx|=gzTKOp)BWQz$^JO+Kb97i$Dk)Z-111MraiOVAyq^9M-zY4 zA#774st~q^kjE3sXy9%OwTwcpODH@%JW$c% z+VEtpL)6%1rHsOGkV+NG0ygiu4hx(Acy?K;$s4*E47|#6;`1xi2w>XlIi4QGG?;v} ze0I55msRITWG|8oLVe>R&EM=T#zMh7~xOjbKW}10GGR^iA1EF;xlYIj;>9)c(F` zZ>BZz6$4<RkOw7$hSWP~`q5HQ_ z`r8i^eh^|Fb1D~mBu4OpXHj+M4c77TF_maf6Vdjvd)Mv`_)D>Vg@K6QAt;WRy?6Lw zE1rkfeNEyxOT}stc4o{&>vM9D|JUc0kc@ zho^#sliu~Nv3nB`UEoOxR(OG5oSi?Q4!(+|yoMljW<9UQgDk<$gboD<)u|%H{oQ*% z!f8pzOcF-Yu^wD7HhDUqW&-qDLYm}2X5JJ=h4r{;E80AR713y!DZ|@S9$N{c1b>lP zFAu(W-p&@J+e!ABg=p(TG~8pM0{cYax?NZ$OVhW9C6ZUJ!imG3b}PjF$vi+@BvJ|z*tfP)6&yBgih>~0=iHdo|rzS*~mmW{i8gRA$msHTssugYg;uWHkIABIL&PKJm1@}yS@ z;cRw>rlu55bCTg?ntcA91A`x|Cfdnsx*Xg~Cb6=$Ey^Z%{R+tT zs4k+)IDWYt|8hVqWk`)>wR1J8(Vt&$^ge6JWAk9Gr=6fy97VCULs3)9IAH{Tw@B6= zE>Q%R8h3~>I{b(@yC@>$ld4G7=);eD;>|tFmxRYWPLFeNvIU&{1L>{tWOw%Er9iujDX-H-FI%F8BHc0|>nE;{z{-Ql>(& zqUyAS&jt`635!>L;$3gk00EZM*e~#5u6drGCs+0r~lnlhFtkfJybeqo-@$UWCHE*QrKO}@^DXO z@3DdQQdfhJ@ws|p(lUBaUmxl3pYw9rGx8pn=3LN(_8w+k^R`bkT?8Dj0PjF`0W8VS z+5Er7MkP`YFh|}E%&doe?~S~19J!1j`4v?*4v`j>LKF|l!xL9T4{C5|452D2((6P} zpllO3oS_@PI-CJ!zEN35LB^%*_V%wn5zjXYt#mc5VGiC`2=j(cIn+c&eyR5{S~M#0 z5e@y^8X(7L%3XjDt&2JLtOe?GZ@zs7paJ-;*!`9XYWgmmv{KW0Wr1UFrd+@%Y_)J0 zb1X+2IbS?uowEpd1O%j#gmD6PGqot(l|8}ZeRh|Rq^ z8R7P*lvEb~34PW5H?)a~`4%O3FuJ+b;OD^R*Okkw=0ohSE37U*orkr}8_Qu?m z-jM<^2Qiz2kdY_(B@@(239cz7JXmb;y;x;;?0w;2`;~dkCzk#vM$aE@Ga$=T>iRYW ztLm0EzquyOTTLg5zbMy#*QPl;@Nf*PJNuc^P&QSMsBpB3f!?$NqsPTX0N|~1Gw6J7 zwX{^54>S1c=KJ>(ImjNiaf&KN7T!}ij$=y=v|CERO!4>~UT+3LD)0VSNOLBi`8UB2 z?CYlN^H~W={g$tPei)~SUpG8?Sppre@f_s<)J-&mcW+y!sB9}8^fV{FJBB4`%9bQ) zl)StzzB<6R5O6XgPD~t07xJYC+i6rl0crFNDny9ZIqfij6%slyot;&=vJ7>V7ccU8 z3Kg4XKms*fUG#uR613-W50v0}a%dIiGT)T-thwei;BA*~n?sng9_M@OsQw?q{Lecq z_0?mCm0=z}^@`DPAvM>JhR%rkGs?t_yZ}xN?T;c}5Vzs4$0}M%0UdVE;SY;+g-~)I zEyOGuYI-UEg8Kr~1)v`s<^OccOxRa{_j2hO(#;E?gbFVFl&ee=$;jEtyS9AfpT4uhy0|3-_IIvHg=ttW0pr#I?Uzs0Zy54d1;%&)|S+Y_k%;p)zK1MsAz2)7?1mqB91JluK1T*f0x za3^1tjipjn53iY!imqcuUR|W8PzSwGQj{-+9Gw&`G+(nHuR0azo4?A;2f_Ot=BAK; zh2RgA^KUNHG`=K-f$dhFA8+rvcg^eQG|FaT?|m!5>D;dl{>A|G4W}JqgpmXwbi*XM z-#6(mhLq=!If!9rt5Z@Am!9^24j-aP*JdrAa(yeNHdzANQAg6>0)uhph+TA${~rQU zzpAo$hqXXKX7F*ISW<%Qpw-O&{ptB-Pw7!$t^GL_SKzyAKK}UuvTg^$EU=8-dj0Da za5hP`TVHM2naUl9$IcTjXPqE&kO_b=SI^iEnb2~1F4b}(vzj&m;0HT$o=51WxWHXw zGnX?J0s)sk3}ppfAV>s_oZ=!z-cQ(P7D0rfdzygR!g{`cndum!#W#Y7vIK@F16@FG z@XM#zx_wzPRkuvG@Ff@*De3TOvO+#4{7Gypz82QM;g7#8-%};lu=<6fE)Bxmj@%MN zOfn+w8A=9Bsr5CautZ`!tvMlM&CjaDhI_idXNl}`%TzT*=jYpI;8m|PmALh#Uj34x zOym6Z^*;j{Yj}?wkX1toOH?OGLE=svuLPV+qA&k^2a>3B875d%9lB^=06AvO7Ulfo z>!<>$c}U_hkF0YR+LkqykhpI@+l|OByV8~oF8`2h+KB+=;kC}^y8c6XHTN0X_d5e} z9d817SyWID#k6Ni#HNBj0n(4CCv0@#PNeEU5!4Y%bayb{UsOOwf2hp{Ju-FHBRdc? zG+${&r$l@F%IrPy`uXcO$ce{`@$9mc!~Y1jveKsq?8KQGt$_2LWN^*&*>(NR-xhb_)-Fj)0TMi zHx6>vyL6{e<^bdY(wbdn@Hyax#L1uoL=q=fC@D9;(vvk7vGniZJ7$G&5Hshy66B^N z&hM^FH%53tG|XO3L;I&1c!F0Z0i% zPyu5!yLWg4H7vFpM|M1>L$7xFpVjLkMgw6!=Pd}!7a*-pft~)bPIx)GO!vY+K=SFG zZER9(uVL5th*zIS!K32>SOL+(x-N)veG?WiJsT0BD z!5+7+!1&rJ?+G2_-PCqGbu+ez9eP2`7u!G8n}9_qOC1hq@{~!z#YNy?t_m9+{b*9f zadQbtSY1u+#n+=}&CP6?xUP#rb!k(Lqx3Z##iqL@-T6pb=|qgx?XJRW#V*qf4qKe2 z%DN`1s(;Gfk?WPeI%MrglCM1Q)$W(OPfyDV6UTQeiZ$^QvO{(A=Bzhx&TReS38L$~t_AGxVYkWPS@3bk_A)ucAVRQHQ&zhPqQ3(l^I0jJ?8CZSlK#RI!#%XWH3F)fLR@b!|1IW^Ck;B{UAH=MZILu4;pKJ z99TbZLsQGs=Ogm|;CP>YC|ZkE3ia_7}c|doApGM5dRb1TU+2+;`#J-7+APBaCEb6nc^zO-?Es z?HdJ(8@)0q_d!es$-vb%Z2`DL;saCiGhRUyEPj|La9~{>RaK{N|=s28*AJ9ZKf7UfNT7gQHRdBH3d}NYra`xuI_2m zr>*y=I@W3y+Os%J-lhJaPKS%l0zC=Wzl?ZpN|jPaZ}Z9pl1 z_NGl?dio~H*EVPOodM2N3ZeP8Wr{K>RH5c7gCA+d>12^UuV;oy9Z_!_W@W1zmjPu! z(OY5zykt=Cmhub+qORQ2aC8{Jqzy|kp>8JQ`X@_g+dl7^ST@_%GeO_J{ms!I?EL!##k}vruvGvg=765Cfg#hi&)4%~h zK_nIZx4U7H3w03ukGG+kkMc2y)X&~*miM?0FVe3gJAWnnEK}XVV{K(k|ML6Hh$x{C zs_IJ!uV@S&buU2K_t@-3H5;JV4QU+k0uW{l42+E%VJ2Ae?8bY1FBj>Y*oW0TOJ_!| z{rBv!WT52Ke()7-n9(UUUfd>=Y(=xLJ{%i^`Vm`nx7-~RsBjD@%9kjQ{(u_jS3CgG z_TQrgAgNj6wfPGHljZRjE&(Vb!c{RZf00o(;IPla+%>>+F>oBwQ+h#Uyo+q_haa+- zdrMz1R!q52sef^ySu#P50I3Zu)asD4tYG!!Kub~oYMNUCgr-b))4?R~p{?@=&b-(d zO`76mf3vgo7R5K;k~BrubAa)e6bdlP`A1eo%J9>#yn1fBm+$#wLbegD5$88SeeQV);j}#_Gc4RAXIHvi1@Oz zr^>p4dYsj()3oZ{b7}okav9*IQ`9`5W$ELbV||(lN4&6N1q<|iopJ@rZP{dy=uyZ$ zH}%W!x~KZAo2eZ?nZf;}b>tj_4?I$+x$orq1_lY;Q)j0>Wihq}VrN>KgJ}eq!COSz z+Fh!WceP$TPI{lh*F%6jHu=u-Xr%!f^4{z3&_C9&E(y%3tZhz7pS-HiqC`1q5W_SS z^o`SC2wpl{`{ve3LgfD0fJ7Ym3XObB5dP;*^BV5?MUw@UB@=7&{FFSEOvY3XelhYs zj)R}SURP~1wfR|H)h~K*Y}@+{DQ~Ss({Fy`=K|o%{LhfvlG=NSz<@@>|cu{gSjD2DiB-SlTVa5G~!1AGyO#2TONXCkbrx2C)n z|FAMF`LVr6Q$N1v`^$wSO+fu)O@T>|;YGSJy|uB7aSLQUwFyJ)tk9Zjj}j$-xye@Z zbG^KZ2`x2bZ;t-1)lX_>*7oWl{)9JVEuj7S7WdHQD8bG%gb5lSk1bTSj_z;B^YZT~ z59^>iKI7EbECH@Wy{1V2N1In~u%wP=NppqW=T#w^oezJ{0w)OgIsYfvyo&d&Xv1E+HWit%|^zrmm);Cx`M*>UA80#)!o#RM@4U z;jiIWDP>Z?zCbjHzDx>wE@Gyf*CnwZYrGS*NLl3N7|+i5n?*TkT>*kz{4a%XkoA?H z#7}mHw(%pvNEB(3xyaB2y%{49KYrM-9|4m1BxJ?+@2w{~{Ec2!6AM2WO2)~Mkcp!Z z6S-Z&83ygZlolFr^d#EC$=EfK)-%vZ8e3%dY10qHpE2Hs^~pMfX|TJ? zVzWt%dDDsUutmkL`+DO=djLt?&&h%cuG$d}|MyIxVFJtpJERbeWVqs;Vls)j~8=sqwL7`nl4${#bZ2{izG#jlVzAXh$nEFD7-)a*2`l<{fF1Fa|8i z+$-Hs4>b?iNePNo4$J&V=He2~Y0Qb@_F0aC5qt=Qxgv(tV89xZkiIF7FiWq4`$^f6g9pyGK zEB2p*^-odD_Au|MK-%Nq#NZ(>ZSO&?P4VEJ)}1nSH{;-gTa!j1RwgV2E&l)#WAiD_t;v-P!zq3EX>4W|zdJ)Bl_(NG-1_%2+#j|7T!!=D z@uLq*{h$H>*ZfQ@Oq>MdhYrIVe&a=_hL3-L)Bh$rj!oeJ$Z~%!^NCl2^Po7d(Kv3G z3ysY-V^Kywo_L%NwHQC>G|3Cevczyb$Mwp-C=D?@PW_=GH}a|d;+JK@Ts;m|N7}^w ze7R$f%D%DDt0&qrq2M>)b4DF6-64Pb!IsYK*09<#UOXc&zV{5k%CNy2OWzpT!0iX7Sl*n`%L(|n9lcKVC zl+e}m&0``_=%26L*EBx5P_j)gjjp6$CPe|-<9KpTd>=u4XaT=9p!q{Y8wY9kn_Jr~ z7pKpSYee}^3cpe!$BNqV>%s5cgE&Z6LWc&vkH?E{Ifn}Oyc=i-0~y`(VdOPDN09KR zKWfkFH|oQ#u6*8SkNLqUoQxT~08`_V9%x67L0H@`4GAOJ`?H3aDamAWSmZDLBu{@u zStQ)l@a3NeS{f_tQH%R+#L$Lx|11bbq&@Ls`(bNds#N)z%k%n#?(o{0wb6Y&Q6pc> zQy(B7OBhfvdY+U_l{r$UGV&6~@iA;4?3#G^8BWwreKdIOb{X4ik>7cTqd^k1p{F9k zCwm&B68*viTUA0l5LMCtE_u}AM(k&9lMk2fzQ+`LKi! z)B0DB3vDqYk_Nx@O08+t=6t?SK1_tNY?H}UGTm1gJBkpHMO%bpw<5%W^KW-HewoPt zn$&C36T_4D5tRenG4CN)z|z@5rqzD4mpDm5lQ+WhcmUTGvf($?Sk+{4na|*`1#6+& zfdycNgYtKL$Rn;elD|h^LGa4`>q9Dm@@2W$p`vb}uVdr&F%|}>Gvd$))n^g?&rI17 zQO=V=pRpU$lk$~qn3c!RAT10==c;}y5oQ2<`LDgnh4>-U}94lfJq0jwg!9uP~$TGg0cqeN9rmxTQf(9D@S(& z_PhmbMrVPo(F_yy4w)1*LenoU6xa*+pkc-}Qfuu2(cd}lY?TNj$$uZ@j~yz*rD;FV zvkM}3IN8!9ECuPueW4+BFfhnE>im?a!34ETLc(M~fhPjw=R0mKMF`vRm@*`<`48f5 zdu7XGZM^>9o1GGdh@CX8w;)IYqTW&ev%VPC+Q9{&;^-3ZU+VQyf+row9`(r77FYLj zzi!1zHgqe@syLtbQf?Amp?0EO_<_h0Pp=9gx&F>f?5!{L?rBaf{;t~#Vq~(oky|~~ z{Zd{>*&BqWtPERd_9ZxsU+`2U?r$fGyyje;$NI*C7uJv(k|?vc{L>Lrx%qOGrFofj z_&l={;G5WPkLCBjwMSU4Qtf%@D$@KxkWx6bf9jLw@g6EyXT9*MEk_BblD>ozShjv5 zQLC8A3w4p@;qBj0aBBXZ9kDWFga`Z>5x-Waup?#61F74sB8BSX5R7Usg>dIhGdCX zOy2n>mc%jrn+x#o#mg>`V``%|q1cb&c1O1N3VG(f;iZ_>g14l>)|Li;1XP^-s z=w#NU4S#2a(Z42(IkHIjF$Su)q%aMNn(U{(F;8UvsjDX=SXxOPCyHI5E+r{Oql%XF zGqGU$X=(gNQdo60&&BW?jAMQA#$^^UNLhF)SE(A^*({`+brMc`LTnsNORkDWw z&JaNo;%dI7btPrR=PX@db%bXG^kNL0Yh>-B4-meqVGH~fKmvzl_I!}@Y`(^(EXmnc z75=eL`93=4r^;1DO*hqsS=<3NWNkMp{;Q{$o3Iy3;*4k-1y|)zMK$M7&KVWvI%YhZeFJ_ZkBe zlK|-6@4h)6VA#x^jvrO~i0W(+Sz5c|Iy)Z?6-nKv|MwDTI)}N^vBXeqL8kY%)~kMs zkdj-BPjR)t;%dBqQG_A8TP;shgG^+22TDUcW*`-N-xut1j$MtL1w7_IT7)M{(BM-Z z?Hut|`6t3@mNb%!_928U0d>7YDAXDOZemE`Ht@^i#JuPSv8xjN`^gN!ohDZ2-bU={ zC0|}^9=y7ZEmQqFsmnlK?|B9cjP}fXjAb5V0yO&7g3~=^Os1+|;r>oyOT|qeFWTM; z8WWW>f_J>=#H6Un=NoIjd|UT4b6v-Vx)r?3!HfT+*DPvWF41qLMJQ_}!CAs=O~dg% zvoso&>sy+#&08Sq+gP*3s8t11e@XdnvE_QdBFeU=G&{Zj5~XU6E1cLE?bSMdUpfV| zRmtvyhbp!z@A8}(yx;PBbe%ta=I%wP3`9bOmi!vGBEhkj9gFrEpxEL6{jv_>Ot=sIQBE6oeQ2@10ZT%S1Y38NMIikD{`&K=qEZ zXug3#NJ*L|m>-J82)8fqF-`ZocjjQq;cpU*E0{zN2Y*hGAA zX3!T0e>wVpbiH*{RZ-tRC?KJ92v<^CMB=K1bV(zjgfy3wmQDf5OG-D=-HkL{y1ToP z76C4J0i+520c*!|w}*Ewll%U);oS5`~3{4mb?3Xyz+z~P(m zLp;rYOs$?qSNQ43-_%z7#dKhgp;p)6c;YufoX&)CYqL#;gK#W#P^17U?5~yoNMS>D zsnw`T|Bn^ZT!os?x!weaNx%A2|*je z_m%#V+Zfv@z3$){Wx88@Ky6D+Z8f6nooVdBxEfv!GXRk%Bt%Zbqn=Q4vATEU#T@Zt z;+Pls3*voqyGN#uUvsQmG01Y@QV*oS&}fjVDnN*R_~&ntCNX30rWxey;fzJBPmRCd z_2r&<&YA(+LF9+7q^H6}S?NxX;;sQ>R8)~734s-#OTRj7p{I%t zW<@BLCdGq6QsieG({7k$?3XViS^15DQQ`iv2(x*KdMcbhwtw~FN7~2UB|7wf;12)Q z2u250?7#T!Hl<@v;8X0Lp^u_uK-3J75-C1@3Z07ueZeqP#DD=hDA>(S0&nl`-Y@4J z{QMZ#>CbH-5qpACx6TO}LnP$8IAAgUD-BmbvgaOK87A*3itU(oexN}?8aVExCLKEf zO;5m%gt!VI$K6jXnFC&9az0OnUX%0wZ^bLtH=K7T@#1(s$9m0OA=h^uoy|`Hi!R23 zSu$7WMNEk{VOoyg96Uo&%dS7%gE(L`@Q!89IRCbQ26XJB9H?{0x}Tb}5WIPSU$A1D z@noDMr5RNnUol7Pdh*%Gjl$Af!1;?AGvSAxmBP7IpNA_RHH+GYjqCsZgm%=_ei7WI zG^{(T9S*3tM&~;%QeJ=u_t^Wnf-^35@_jiAX+Be?iUD3H{N8AOF?HVeR;m50RYOZN z8rsv?Qz2MaZJL@Q;}uEydgZVoc!o7=!Ru(qb7qYAYKPf-^-jdx&VHpM`L&n-ONQ#q zT2(ZYetTlEprNJAG<7>yz{*>*bI+7)3&F`U^Yw+Fh!3IuYbfF>T%`#q7%c~5^iY(9 zRs?w!JPyG*nzU;)hV1oSXc`TPNA7Szm1kE zgJiIFxYOnGy8JH{m$ayGcKqdaQ7Rhtj4&m2>Ax1|dYpuHHY=oTa?ht9D2JlRw|>5v zG>IDd+84ZLz` z^)3fmHnv3~d4$TC+g221|JNkQGiVrzqvg%$(wKc3(F~ z-W0bJ*hPTqem9k!a_(=!Atif>&o|NxYFH0j3afRuCloA*d>Dm9Is@hwhD8n35FE@+Be3nz=y+mTP(=F|2oEJwdka22D*>Sw>b9r zgTQ?tZRw6|;@TtPAt0^x$2|)0SSmOSae^iIQAj@!6Dh+2u=e2XA56dHhKLXD+-;4p z56$~oVJCl=m0`LEA+aYwg`7NAc2^7BG$1n)FpVF3UPeZj>DJAIdA@247y~5a1O(oz zIsD3<%{bpI|J>YREy6$hvrh!lJ$)LqpvyptV?V#Ov!iZi57Xv#BWVq%3NgI9F;y{4 z1HuR?m}O!W*7LcYwnX8?K@A3?P9ts6U;o5WjU-2xy zUi@O>Nwi9Iq#q9N?>`;mh<>s&x+nT*iSL8`c1G41DmMRV=#rK0%lAGfGqi@7!vHH& zJA)DWC4#0W#h}ynZ0{Y4RP<3MK;+f+b05GftoyZH;+`QVR1x?xNIef50q_-)4hj>$ zV?k2nYA(+_XkdELQuYvWH@bn!XT+3&meohdR*H+vJMBEFObMO4TSG)Z`yAI4CnaKzFX{1D;3qsiU_3~rQqGV;^SJoQK*DichTh-7wH1PL1>>%Wg6!?> z<-hMF=Du5bU~ORFQ+fO7WFq3_Shh0u8fAJ8LkmP}3Z{o+L1$khCwI9&DbVT&_9>re z(eEK+t*edUZ_aB<2%ko{O@&P*+ zlGNU-@$V(Ne98+-vf-!4S7VFx^EI39?Pm%>#XJ|~hZ-%E*Isv2HhN7WW3aB#3`H6b zVb>SMVGf93K+N|^bfQOami$J2DFg_zs=+k;=aMTjSxRM&_MJ~lL^;47y+_1Fdw-A; zxiA)a!y6Hd7SQ8SZjCuei+TLB1R!}3RzIQ?Caw!l?WnUL%dqsFmktW<-czMGoeB3u z8lN1b;S$aTgzaZ)zZiRx$SRY)hFu$eh zhcH1KveUH*@F!LIRQb?u42o#of)h&oA{ zMEC%q@{PzlqK&rxupoDuFqDbUlVxC^fItm6Lkxmw< zVfKvBbYAIoZ`|%-+CE>;_h;(hW(3HEz(3?7l@W9lkKvI?Nul$&H@5q;TruohVas|o zJ&03b!@;ZLa{C|3BtM_|=z7k>+GfN@D?FW3Z!!z+0m_vIvjiRV6%}p3#~!i-U{j#v zNYr^1>_&SZ%V!aJ4_)c^NW1CDhC zac5sA6%lsGbKZ%lcS;3si2LCgd-o>Fsr2+E83F=CRFJlpoV=(2=e&-)3(vlCc~)V5 z5C3$C#RJ;bW##q6<)^j0kh}K;Hz09u6!8p zZF5g#FzF?Vsp6tvbaYj_XBXe*zc+1?6?VIznZK|K;b%VTm>c8ehNc44-jf%w1o;E_ znK|ZptX22+ zU`Me{Y<&`j?qXKvRn1Hd(ri%*=he9(esBz5_P#P3`1hd>H0vKi3BhdRhXbzLD|up| zjD(~VkcqV=AV1r4s@IQ=pT)e1plN~TesB1byTLGL%OKezHNlh!|05p$t^J~6qWomd z_^9>65r-4PPscJaKyj$hjK||^`%N#8dN3HS#~^wW0V%@&S;C7??B+9;`nJL>$k(o+ zg_f=~1hhwE8Xna*n9ckp&YEMm5C8OYS>Z3Q^K;lb>_jF+@x(FW^VdG(px|&Zk*ovR zKuIo@kyJo=Gxg>oRAdO)X6U}btb@AD#_!JE$gvadr~A+o+#a#D?60673LSN{3tA7p zQqU(W#$CZyD<;kaj9pb`Ld*Ou)*uc}F!#suIwg;GzX-I64Nmy(m}5Y)v*!;g0b4W{ z5WpXyC`gCSc?Pa;Whwo&vqjbmGesa<{X3bFB*Y<+w~o*?1kKZ#a%*;J9{lSEjL+hL z1~S>Fdm@e_A~BaCfUY9X8|b=&Il8A~fCL&#JY*!<@Gc20U$^4>TfPUMs!I8hs}Nqf zYz*WU{zKQ?hNi1;d$(Q`-@4-NtBu?=J;*3y=?A^w{U#vJ-ev%%ITYMQ_Z0Ct2CrSw z3)PE;T+4qkI~v%SMgY%`%un>4CY0OmKwC{)N>mg~#YF1*BD%`k@+hoI(me}+!4QSt z9(+J5OwugIM~K=%m;L}wYZ=iYGZBkW8f2mI{KbM%GE!WfTR#iC`x`(tn{YxIr>54y zQsTn^j_+G9AYhC2Sr*P-T)Bd1I&NOWe-<`3k;NFk?0C)=FRX=Li59Zl|uskueFfreo&EM1c zOpem}oy(s}f?ReZnH7%ceO_UX6pfVZy$w}2C?lYv2uq3$dwF!W4w#ik^q^AwpQtkr z5-l2g`Tqn!g_aI1oSG-=SEvxAl?nj@mmC|g;|%ljX=(Lqu}GYVHryi~=1=@4p8PRQ zjqB#L{nzCh@%nF#Ax-HKzhx~yRQ{95+5c!*UdUnios!DX?)bHVf8b%i(lzcPw0OC|NnZenMz2D1r@vXl5eCtkKJeO z>mjVkAM?}$ZukJeZi^fuLjx4HC$p$QM8OCGkw>C$Kt|vPT${3>OI);DJ1?RY(qjeP$#)Ra0EMz@vj^ zA4WDoM2euvYKE4kH@w3G@RTX`k1J{e<3NK&WEE*8Ggi^6{fesRR)Fa%>A@a9`@P;|%$Fn*K^4o^)@ z4cl?A>+(K2PInMtkr*P6@cn_;F)$%VL}f+TQ6*P|R;

p<8JqN28pH2mC;gjx$8M zZi|5G+`q0+LWmj;)F`1+3>fay9;H0zLERZS~ zy=jY;!TI1*BVJ!L9IF{NS50onZ&5k&Z|V61D2s~5orsEPqg%hkP+kAl9oevkp?(g# z#Rbw&;8Br*{%_5P6oNh$usqdW#N@K@@0b{v$oR~%$V<;ToZ1)~v*~bk^@j+K^5pK2 zq0mlE$k+vi84#_1QSKojLEz?7hJUh6QbKh5|N7;OQozO_MncO-OU3a(b*!lTa}OWM zC0lqdZW0W!Koc}6k_P+l>p$)Y?d|RF^={YyifK!cv+uy?;^Laj$eAFm2{)iGf1$pC zq}lZz+yiuZ0#t6KeeKX_pIRhOUOfm>{{PQ!ZYA=99*hkc$4KYmNT{y=l>7+VCG^o5 zaC)$#UwyRvurcl?h@3W}7L|8>Z7ydDrS>UNC!x^SOa-vjM3mhgH+cgs@E(*Ij?~ZK zf;W`*&5BWRu@5eags8xh|2%o{5&s>bMoVT4Y^eW5x20xSMJm_a&X&ZmdHewtpB|b7 z>?ypqw>EosRtKXwSZzp)zEUrHbiZRtkKXN4&1X`-{R=(yzlDb*Y$a@1zbmNY4kDr; z$t{|p{4=G7tM7Z3jAB;Y9m?~*FVl<%5PU^LfiiUe#qY@yGb7NYTGYdPWEuDIV<=3l zCh5RpioLB#|T6$o`JS`@(23!2DIu13CuNr&FC zcdt!Y-&CCR;-8$Is)<=yQ%JyUX)}Qr(**q!Fd9(w4DwN|>zUk*eM+P9hKrjRemeU| zlUG>wEm5bm{$h)h>b2GkvS6t1;`{1M?9}N)5kdLN$I4c0snNm~H z+~ku;2zNV^J0pv9=yO0pdl4wDN1QHdjIdaTw>1=^@P^zdP&I zW)9~3ZVjaM1Hr`O#cv8w3nI_~qyo zoay8jTWLKF;#ERaROoDU#mUc~JS^0wV)Sb^tP$NE%?W#KG_cL0lF)eF2z840k0xK# z#k~4uP1iyGN)#IVhn0)*ao%v6NX0#2Vl(C$k5cJIFdl~25z+JTkd>+1gwMHiXTqlR zryK-l*fj8Q$i{Ddp+eZ-=g{u zY8T;^>hK1pq)@&uS-2NJe9Kten@|r!d!`K@UU~bHD#v-9g;)$B!TP4)uvDNnmonsZ2Up!s260v@AF*N(#vFHO4J-;BD^;`p1AtfrlqN5H~a%>`;b!PqR zj||_&L<=jOR3K$xp%!0g`V#iZtFUkev=z^s0rcYi94m+ssN z@grG=ZbL+hAjVf#6L;G?YRQ%}I@$O#Z^f1mKJ6oQ_d{fIOBVu4P8f(xlXNt$V39s13)cA(x)FNqGYS$@6@&CV6Jm zLPHTzET|!Z4a{886e?$5jj-FJJts~`O!OHXl!xHFc1qr^FnNrlDwckC__WgPLdtsX zjC){m@BHNABA~I+)y}^JFdesF--4uic+~#KpO;Dkj^grw4NRdOCNPHS z{o>8V(7iB}){}2zl5VmQP`L{$Q34(rbS5kqK{|J6<5ASB1t?2DpOx(05#HJ?D#bjE zjE^BAM(cfCRY4)s(sqG!3tQrsfl;)TyB7h7BVjH5#Qtk%f0m?B4NYca$Xs6T*_MLdRL!A8t#Y!(f&c(l~J^iVz_}T#F(@;8ZLj z04ROKXT1@v5Z^An=RQ(|4MEwdvc?@j2-|Y;BuDdLn)n;Pag+#54i>&z-=P-^0wblF z7#anZeG2uyi>&dHA=+uy6;pPLxShBgDN)4v^#iK zhT1maKdr`H5BxHKN;WWGY5CUIHB76vi{bil;$ySLwFfD;d!e1yX3udT9Lz+9@d|H8 zl^E%ulm~-^-@@9ehSIuN?=EH2nEoB9Y=}Nv!^@pEYe+a1ssrEdK9}F^R%xZ%iZrZT z5}3X~-7hRD1vG4@!ipbCKTTn)pcMWr(9zk64y=cyu}UQ}K|(#2$8mbuS6-`AzIH}K z^pPP9q6y@};SBx+N-t5Tzd|he`_wV(GCXXJRTCswp@>G%btylqf8q3INOHV}qE~hV zG2!c;sadprRoc0bKU2YGopMXo@EYU2TPC}8+Utmv!RHQ%!YKI1jO&4lrgY4#6afd8 zO}qvW)Gt?hf3PjA7@*bURWgKzT6EAB9f9aKfgSsMtm+&aB`xAgMJArb8aG^Tzro)m zw%OIY{@|0ui%>~H@Vfkc5@)3yoHG#*KQ4X|zqus=IAT;H3>Y-@ALJ|-8gZ|~54uwF z8zf){LM#;14KkOJT%G~~JtOzet$UMRVH_Rf_-ncTj^iL@f^H8c`U1YjoMp^API`{a zOfZc8N^Hb$ydVcF=TItBwFqdq=FSq!H*5{s3j89C!_N=e>-#D9kTKMYjD5rRLa_XT zlInn^PRrFkxP%poH>`>8>N}yG94jSK(gWT3W7{m+Hyf{RH6DcxR|(aS zr*$v{OvAVvWJ2G_nPBg9{@UZhYQ4R9`T6cA>-*C1{iiPaG*X7Jts2TBoo&{^SY zOT+oT?X~+a*sl4cPicb(rZws8+e#DMfY4+=B2}?eYkryW5(?=Sx5qzcouUjnwVn87 z2I8z%O=cF@^|rL{NktqYl%G?^E($@41dRK zOxTdPm0l4E-7;1b&R{jYa?LIuhu!dhd$Qh%GJ85k)`9ZF&FRYBy43baHNtqJv6lk1&Eb2|`eeh$#fIRjl#q>bTB{fAx7U-XT57+l@=G{ccWj?IeMfI)JJFYM&} z9pN24bUH&p!ktp6k|y%li|*>&H)1)?h#w9`()?`}x^A+sJ9^fM`3+UMo|<#bydyF~ zmhFu}wM>JF-p?Ktrr%lI=)@s*Cku$lxy-%A?a z*2l)~d>ujytfjl%e}m}iN^FM3E-gl;T@WPh?RAK%n7e6k?(H4o(ya6h2!{Qs`0?GT zSR2*L%j>=MGQsC1>eR@!1I6(GNOnpi-C`4rebwmNl4e;^a_)uk8q4~9YsORk8G@HY zoy_Ur3W8joG7V7sHP6Kl`%%Og;JNrwLn~ zJ7d7Vm5o3IEmMWvNL?BnUAe0LdeDFkY^{YmBw(`<8B0X7J}*ONJee1N4N#XjS;{%3 z@_s@EJZ}WqJJNKI53Uy*JCyU-ookTI?+v1N5-)f44$SI~2OreCUOyE2#)kp?fTYaK zo~luY`MX0`P~S|byi;oO!#AJC@z0CTd+s*-?A1$p;+=6#^| z{DFnfHA!zr;>O%M6ih!?h14(vJWGjEd;rXTwh6}r3BFQ;?j+#6M3#Pxl*qT{`Bn;D z7-K|sP~tnwFqG%i2ai?Ig%uKfuTSqD%v1~WSL2JNnGZ5TJ+SOg%83i9>bw_=UQ0LbvTbGUVETk^c=kS06$#|lF?{#V87+FM}5Sq)^T%v z$!T=bgI=4ZvEYo|Gb=!3IE#>8L-l7r+!P#K(d4gA`tc#eS8xlCD903p?^hOibB! z9CM8{f~#Ujp`U3AqV5dB5anZh;nzX%7DfAT_iv~av;4*se1NwOq z$+kx_IR3P8#jiK!2sOh{s;R3!vUP7qLJrKQzNsBZCaM@SxMOA$NPy(=^k4Fbk{dPe zA)T0;RS~LXj?|Ia55?za{X+G*uU4x(?%CZkfxNf2+tEUDqNV#VUYX2|Fv4|UC9^kmohe!nh+jAL7^tQ>xF zc1lgvsb%z;GuZFCrgHM~2)_r!oS-xUYP$^CN3ON8(tAaJD@%2ozp$#8>i@ku?QqQ2 zWQLwy7uhKhJVRHH#Mb<QU7(;-X;k}Y52$&Ys zBoM#0C}kcAGSn?hXo|{ZQuc^p%{q~5>3 zHg20;tWPDXgbaK``q_1Sk|_q4m)mh>FQ<7OylRTdALb8ykpWnrOkB&h>oLmy=kHH! z_+@5S3$9ET7b>loKQ+essWu1D3kgyG3_pHRu_xLgSRHD{7y_ayn5#Wwkinx(*S%j2 zaCS`00lvJahsql%<8?NA3jb0O7)2%1LsJBqp9Le78g*pDrJ9;l28SY|zCr@D(T*5} zz1usf+!Q$&p-QS+uM;1Snwrw5yU6S=%B$yq5Iq^10cj-XGWYAHH6$Q^pXaTJ6JW`} zEbJW^$Sfe(th!Y;IOt$xY@BH%<5mCYY-Wqq%kW739U%opkqnXV@1oAxj9x2<%BbEP zMz*kYKwcoGfWYK0c2i^HCofsCLD`~UeP+x5C@}Tg5Ly*$RRX41;N{nxvc2(_V@7QZ ze{1cC&i5Xhoz6r4{yyxfjD*CSmWU2j#`;-lf^WL6LL>`DQAAJDRf)2I!DHnx3z3LT zEY?O!$1vLj3@3f--%#o`NILeJnbJ613&v9-FjE6?I$#U|V{w$eD6cWD%Q&iuDFRhz zew>eL&8ipzQ2J#6?2xbim;+*mgMOm;*46vr)&Tvh?4-`Wu!6OLPh_7qwiRNY>Q;(W z1b!@VDR?KhW}~T{)O!%jN8?+(_~qEbP36V2n1Y~m{oBW{!)E|s+o4y5=EwT?L z1t~llc?#JWuZMYqkQL8384fU>jgion&_XtJMD$Inepn8a>I~bXC^78DZf|mnq9BTO zF{bFg@2Q3C9E5}8p^T|#dK5kLNiR*q-|79Lc>FjKGck_%e!(B~K7d4{^w6$8G>n0xHKvAZA_3pE?}*LsG9D$L{2URUNQ4NK?>Yl;+V&}`CL^?3 zAkPenksb@dqrw>E9==w}pGuK_=fpBsavQHM+mg!g{5eh)X1J(J&Ue|QEO;%9Mq7Mk z&+xuhwO__qX*9EdmA+}1bxE)^4+8mKO>t-duwAJ^Wu3f4|zrO z=78Iuhgyca@;HpmVpfD;+{lH6jPGa2*X9z`zO5{+C-U`l7>B*huF+P!UB0VFH`MJ@ zYdfVbD%GF@oi^UlQUn^!&`w{@3N|f)kR#_GJQwUwpFSmZjGB>YwJ5SeC#Mcwi8D#j z5>{9B9X@bASmt{6$X4>L3F$aZ_7l!>N-!o<-O3*v#95T7$ECR=8f_pGP~tj`@H**C z*z2eVz*ym;WIwpFQA7wC3(Z{Lj=^x+zGtfm3w(rjhX)6b8~uB@zP{lE^-8oqt`VvX z7{t@f?#@OGIr<-46<3enr7*8-c`3@viMHl^%X;5sr_tn6;T=fI`P`BWTfdsO&D>RN z()^y`aB1LWv=V(aDe6GXyRC#6+Z|GNM5=FuS9{Ut#L9y!*Zr$_HNGF57n zLbZ9RrYNT0`IkuHQ;PMqsW5%V`8f90u?Y4a1p;tqURqQz+*RhdlvtdzcQIBHK8L*4 z;8N2h&q|2WOnnEEDL|%@)a8^A07j@a772MBsb(k0=pNPJkvP*b#UKfT(ai?q)Hc0l zcnYCa{o-O(e{{^pgZS%#75dRA;W15K&uFMlsXT1c$TaH%oM`mNFD6gVwNf3kvx6!; zS4{0sjFQSI%>3om#sl28_Cd^7VcV#@=4;cBKv$oj{zw0JALO&|!#Ds3ik26!h_#7g z1<^ti%tN~0ihdFn&SQpFbLQ1QgP$%BaBR$=Vfyhfg8M{84r=dO@02=5MrdsaIZP(j z1H~l44rhi@_3j<2oUuKn)7vi42UOMjmBudy;yIk>e_*?&OaFG?8BT34l|8?_%31K|h@W+0tRj|s9!Ezl{Q|UsSsfGqAnP)UXp0Mc_#`kHUY|9owmTjgjeFH>m z#|KUys)#na%%?a#f!~PPvUc!H8~fuXkPv`d&Y5hAlD=CBHsYC*-4@msA-W!(ksRLxb(EX`eP+h77_;93lf?a%AT9nEX zErS#7K&+ceLQYK`E^gl<)v2QDQn`0|M{B#ktm+U-9ts9A2Ck86oP##%W@h;VX>fzZ zw_>c&7}qTwE>1u@NW6Vh0yez&FD!6%iJ*zyjO|oIlr&C*dz|ALTO@?}ZOSOv^Euih zd^QW}d|tYbiHJHLnE=LOoSWZ_MX-UQ(+k3sv_zlkK^%x3?xJLkrpQjNZ$uthlVG#F ze9Fy$8Y1Pl&Q)WT!PD;260N%L0`Rpx)zM>1i@w^Irj*l5u5!dR-w(x#oCx7-b-+m*NMt|0V7BW9K_cy>9v$jx?BMW9 zov{eC)1~4E>d6G_>b2ghlcBG&>Btzx#M0I0e)((PXL$ZKIuX8E&l_Vqfo&vt%Y4xq zf<<$)`yFE1sT8UsBO}AE2pg5fd7#IHovHo*zcy;H-leMIXd5^J;0hB)Z#P35(j0Yb z%Bn#DSYom!s0M_jQTk2{DsS3@n8ZR(T z^s=c2Jc!r-S%PJ-1fVXqE?pA@mduQkxb)V2nbwZ?MguMjFZs{Z?J_CO!1?aoXi4zQsWxsr5B14UuTu750ig~TW z-@c{pmeoQefGrz}F^K`5YW53AceUwEHdO9AvZM>=9E7O&93uj6JZ0lVG_H5Xehxf1 zVLxImLwO^;GuIU|2V$v_scDu|=ZoD5iznTm1sF#L1+Sf86LH5CCq+|ur(_)6-0=q% zw9IyDjWGudac2O4k2#lUsdWJZ6(`Fy9T3~#-y*t^b0p(&?N{cLBtTz*h~W_G`i*_3 z|Dzjnbw%=S(V__@j)#_92B%rqCi6P|)5fURd9gd`57> z%JIMnEAEtok2k&ccm5m`iAZo<HlXfy+ml=NuU_VV)XVJS0*E;71r?t{CIjkleaN1O+aalT|4QLvR^U?ZV+`cYb zH#P_dUoUQ+d_?wbRNzcV2j;ww0{A5x1IEPR>iF^LK!DZNZeWc{fq5)tnhqE*t8qQI zH_#pI4yl-v4GmBz(mzP(n{9T+jANe%eP*c8#+C&5UkjI3Jp&`n&$DXxNr3g=!y7u| z9<^v!@P=py7pWBGtI3J8HHQiC4^`W5ySwD>){Eu_9`Phfhh|25YQi(Loj1`CjMc@OQ;d#?myV(D6kSV%yxOe!e6`IuVwbtlnm5pj}nE?|J?y`kIz8Z?n#J;FuWzC*&Bqsz+-b=hXHT%iI0k?@uKrc(#H&?peo#I`tXD~L|U01H7 z``XqPTPv-aq7|st83DHj8{Urd`{Od*-zGaW zrkgYRMF+kvs|~=k={6+VSnGUWZ8h_LR;?1m_u%VbuHKM}5}6AsmW#X&My#_%?*j6(t44@K!B){!-3QKkVl2A;+AWs5&+W7 zridKFSF*MflIC zuB6I%s*=qHMqU4l)AUA{l!AN>ol~GOB@%&!hu7`Bx3Nm5J%)jpRA;pU7HhNL6DKJmh^I_fb@-uIRhPE@_+TRe=zo; z`3hI3kB;6``+mK07sg)7mX_Yg)v}ZPH{IZLX~_DmrDG+bpfmMZr-@LN^?f(EBVZ~A z@)3El2{-L1a_AGTOw1%-o`{fEkndQ1_^W*N&&Ml_s|CLz!PtXT*29ll!{7hAnoiS3 z-{Og17wOowH2NF!qr)T9BE$WQ$kq>jSIwSuy0r&bAL@xOkvl^3XP&sYy0O3$5B`%I z$M^3Q0fHK!L)~W1&fY_^v|`G86Rr1lVA49uX_G2P7Aq{Oc7)Ghj|U z25#mMSXx7$G+XH>+?Sc&{!N3oHrZ~7g!KR3#Nr}kzeJ-=H_Z@TN1=wpY==U{!T%?n-R(Q zJC)Pv4vsCQWY&o&9ZMU1OUvheWvRVyrub@c(w?VI)0j4ISp!_aM$_nDY)L947a zH87WvXrs|FWHkRRB#Fy%o8X*7r@=2yC#_>><)O7JG%r*I@ajJH3`3X+SZQz|J|?)y z{P!sgvzo}%{)d>Szdbr^lJQCR9(^~vqz2-fKp0907#4`Rru_Xx)8cM=U-GV=npW|Z zZP15$x8)aP zl^^%&g8Fu2ZhHh~JtTrixLUNc ziD~sQQ8g*EKrtlHB!GTCI~{4xmb6+UV@NQc9Z3~5udW*0FfN3{t)tM9K%rVeQr#Ebv}LvG_eide+(*x;*|dFW9D1L~Kb((*mW9mb zvW=;&osU=E9L#B~tpGl%5?{K*vW?UoZ*cYbt1Hrh9PV>pQ4f__!D5$EyvADK+n2F8(?) zTP}F~dF3`xd<6d=`EPpBFTsHaMNw$tep(u}IVIWG|3kg(IZjX>qc-63yL%LUP&CG? zdoSxv<7^@%jGRks2E~)`PsclRhY+(=_G6)dr61fIJKwx=UqZp{Cg=}P9O>JJ5u@u6 z#%+0=8n^C8JF?r@CI6^`;7ct9I`owIB|{e7IW@U#(4C-uSv0zD8M@h}7FKsJRHa~( z?iuW*E8nfj*bj=~FB?bZ89V3uw`-%z(PWyNo6waznI!4*VFZ#*H$EaT%Rg=}lejIP z{k?#FBlAa-eOy8N2wt&sVqLt{LK>3CMrefh$KlDmf1OlMEmaAZLgm?iPE^AKC>s|# zumwmrDN%B{J^m45B(lH~Llb!u8FnF#BrTNyhQo2-+QEL>GdRKn((|>oqG&z%(j0s9a z!>~T__}l7W!^;lRDAqfjc5iAlzbW8KuFuNwg%ur}ujTgkhZ)TnwdeP9!dtdCJx7-Y zdIz_zb>$Cz1rJV?yM;;<8`YGx&v?4Q)gNgxps!?yEJC)n&R3ARoqq|{7#>GE?gPR>6| z)E90UXgOK0wBYKs5{)(rllO#S&EIl(XZf!MD_5GBoO3wj17JRDHX^DEYF-r5 zLm_R+PF9Gufiv z&K~hHhAeP=rDiq9`*Ccn;2tzt*?Lb3vJo9`o0cNWu=T)dGiJ-FEM%HWp+RwS@&lP_ z`*8`=wPuYRJi%%)xomCuFgfA7HGlB+@4i2%6#ppLO-6U~Ll(R@$9gUmj*Y0i&Qy!& zhn;$2cQbzmg1wYG4u^hGW>)u;s{$h*P8f4f8t+f$Zv5o0;AYMRnM{)~Bt4s|Rwt7a zKDOh_Ggho@-*mTqeRVl5yvtpmEK(}*M)CnG)Xl*I?VWH^@Bm;*?Uk~9g6+VY1T_J@ zmhlJKMlX%jS#1;q#YjsQ^6Bh|0*z`M_g{q->n?V_ScR#3eSzvGSh>$5;ub+&`9~eF zWGQmBFb5w;<1MI{okV$-V3=$Z`C&e|9DR`)TYS@{yY}A+E)4WgWFHC@vGOthPuEyp z8c{%t@s;1iFsNy+iMsN|%hRsz)O?lZT*oILKFm*nt3kYX>}{&s)rogDa)RRh*b1LZ zx!FtDSYBK6@6Qz5FlLUE01C5!og_J1idL|>430gxg9=J{7|_AcUB(=Ny#NEDPjS*+ zO#fbBIL((brokR>sEy&@@>7ilSH{`eXoH);NA4iy#5U_6_jE}2qPugUfJjJ7BOsyDDc#-O-BKbc zDcxO?0)jM1gCN~`Chq5b-nia#uJgtHW$*2p@toBV_%P-EYG z)B~K6Pp#E2{}M3ewP#VoWogbYpej>(X~bh;(#jRbvrY$0HbO}Ny_<}ehCF@)YXzbhsa zjWS+%!1cn(Uwl$5ztW0x&R=MZD12WBEE2!LwR8a0(ku6nxyO{O99XQJw)@WX$5O&K zoa%gG>8@85t&sp%|KuJZ)o^=3{8$`jfUnom@sh3;@3WRmxEV z?-0ljxEnNV6^9Tp{_Kmn20P`?pRy}Gox8CgXbRTRHnnuH*;$8 zp3Q|KM(aKhKdAXqebMwSvl&^6lI*`==Bd9h^LnYX%u*OT3fPhXvs`Dp%&B#@AN5B2 z54<9=mWlJ})Wd7@r=mxyhZbOlM7|FXiE{o~t=Tt&(&^6uc3#+mG0 z-v4Bpf13QmG$R0>S-T;;nDk<$B4;s9d$^5NWN~JyQg~_11HYyGM<^Z;NL)b7)^Yxm zU42aA2-L+wRQh35KGQHf9#PFsXW=473(ZcdTv0d>%F#Qdv-i>uIVHBk1rm|$`RzSD zz-drAtl?z99uz4$ht!R}nqI!A&A_sXBRPrpGBw_Ebtd5H2oF?vQ@P+^>NhBA%gXR@ zjt?C4SgBscP(<-qOdD)B$S~>fBY1CQSlr;fk9OUe?oJi3V+)p)GPpck(St2)%+LFr zp(jcG@bX@C6|WX1Go7H;k`)*)Sv3r31HPmYhv6#FcMS(5YL0}NO8v^{f)kVJmRkZy z3%}=>%opb4Tc{I8z$S*yMoLJ@8qi3AabVCfaD|7@u18loIAAn$6{{;Q9D z{@uu<7HU>^(i7u3c~}nJ^Jw#klsy3paH!BI-u$X7ENVi8dm1FCVp^P~^w9P@ymyRsfwUMx2EN=MGRH;?4F#s~k&Y@Q3 zAoHKDmn$3St4a+3)9Zze54f~PzcEUG^N?X#FNjvCJ;j;49p^W+7m~si2amc1=y{gc zJk+KW{|!c2*!RBgl1Hob8}><5psT>!6{jaFU`g`Flqe%NZB87BKQq_W6Bzi&1L3yDm3@Qi)bxi=rrw(B>bLQ*;k-;RhN`1L z*hh5(;L(qCY-3(ocCZEa-2JiQ&um50(a;qrjXwW1|J`F|{UuzvG{}W!&=7@nqC~2- zO8HvRGb^{DzZkiM==4UQW{x!**MHV#pfZSmrY$lVhn-@`iWRLanlq~RemD09ZnaVolTj{HW#XLZ)|)Nx-u-Y zP8RLg-yG+E`)`PKA{&YQ+jqrR^%R_XvsK1blzYr*dM1IJFX@WGvlmixC$K%35?||< zFOB{^WYIfPKfmKsB@a>g1_v~vweQ{Y-%k$#ezPZ;@*5A_ zw+ko@Bw;IikA}wUp|F4wJaU@X>3V|h5R*QN(H&z06_}p=@hS@Hn{3F-Z?FgQoPD9n zHUy|%nR6Iie@<-n?4o9y`XK4OmhZGP_rcM&Z;1x?uWCmlP1yJsRmNxLV+c59FTx}S z1`TAwzGd)YW+j+BF*Pt!B!iC;?f#{%o+ZwUMK%|HSwe(EL}Yp%uIB9U%6(4UsGtxH zS?0@*erH}`J)fti0@h38X{SG$jR^PmK)%uf48Vn6(2AG8V#cL46GvAW)yA>bfnGQb z#AZf;Lb`ID{M(ghc059RXedB(04FQ5W$k|Q1gP7N33tT6PBlqT<>UKcR|~0Di+G#> zqcB)|ha<0LtIIUE>t(8rh0XVL<4D*Vvg!dGL)~^ej9g&~ z-^j>e!OQ9@ZoSLpKaQL=e?l*iqw4y3Om;~OEeWgnEvjs6%3saP0J?_Gr*@C%gH3;( zF1#C^X4P&_7~W&!)3($qn2jN%fzKkNIjvk|(W2$)q^C;H0`7aGt7;rh&Ivq)ozNd$ zfXBvOmkN@gT^O_>&dJIth#uhz7rlLopQV#kwXI(=HXJFRA>cyHJYdEkfi(Y)`|#mi z=XOO~L;-c7Isg0g)t{>VJ!85}LF}}QTURAT^i@DVux@1B8Eg2U*1lA~pL6aX^<1D- zfE#{K;8wP9TKr%K^*m^BL7Wb$K3y615f0&kE3X4*HalQI^KW{FneF>v-kK3>KJ530 zKF|}k`N3{C+B3kF4B!!QFZ=_0u18i9Cl}sd!{agfgaV+e#{2w%%X3?E+wlc+Gvkx~ znQ~bJ=_kbrPe9cTt%<$jJ71+zHXp1UkQc4%XN-<|A^9%=Wd zPYh^e2|CSVcCk}f7<^BEmiG6Fzo_Yi5Ui{$WkmMU9gbcuEvs^jwlw&wd(Uy|;zV@DiEGslJ3s_QJf2nOzUBtk8+* zZn@I+FYEa*aVc}UH?AA%m+u}P4!S_aKGEMw5Pz&TZ5GoZIUv3t>_4ZgVwK4}(l?d- z+RZuZjCKwxFmwzHqPtt`{4wGz3z+)?NDm#{46BiVFubE@3|q-c^be*S?#f<{BCxf( z?6l0FJVKga8F2XtYMCmnICPJXsr5(u;>Oq{9qaq|f}qvPOn*EnpEZ?`5P1@-MsQ)_ zX^A?sNkX|#USZ+N{vyKV<>lu$%xNFQZT-D4Q^!dKu(!eDQ>PXC2mmjga}j1@hpU#%603Te&PwAcHhCz${ZM_IL^{===y9g#KoB* zIHZ~Jx}6`c%>*;aF}Mxbk@(ZInsgPW)_;{09hQxBLL;JC*;MfB(R+AlxcEXXb&wXC z+FsSVpzI_6(lwFEbu)wo9Xm%t-JV5J>20`*PVez8cp{+u!e;|?lE0p+YM^hx<4+as zm>(;R15_$Hzy-mjTSw?XV>)tX2~o5xr(vjAM{Rf9!Cm0cX-R!wYp$mAmOAI@^z442 zpl_QPVj@0uz`0{&OMGoonvpY87o_Igm1TVZ_iR{xoEiA z+Lq6O6hZa)2kJqN#WV***t22wDfGDd8rfw}WOcE*=tl$8*=8a1f>Hi;P$sDIZ&pxV z9P~OwFn*j$!r)+Oc0{zaC}^A)NQJ#wA_>{Aa3)ZPb^3>k8d!yoLH_cA%fMvGIbN#U z#e+kwJVStE2b^KP=~5OUY6<=`$IYIP@rojxLyb+Sg+MD^Ps@G;2a9 zoeuG}?7+8yVP9bZQrKQOu`QD(mR^t*;R&7{kZEYN5g2SABi`?oub8Vr!h<^Vm`|d_ ziT6=GD^i3VM-u0aPoV7R?#9c?`rR}apV^j?loS?Ef48FkO*f_DHmXrqK@w!lQ+mE4 z$rH3Df|Am$2G!do% zuiek1{Zy>=zivKeB}P6mW}#t9ZRd^%DI;sw4Qmf1bpcwlieIvY8SBsFEhb<=o99>a zbynl+Q$#p3Wl>}-pRQY+4%@tuiH&bp9RBc*#%zbx3{EWX#eda*Ir@j+pZ$Fu6%`dY ziQcxzh@pZf@{>n?jtN>Q?bi+=4%)*1ACu72LTNA*3L@zdj>>a6WkvMh@C1koq`;Wi z0A!i=+P^xG@83B*3EpFSV>wPDy22?#T_;Wa4|A%rx!;N)_~Uq%rrzpXaVpBnzo}FA zV3{5?;NbS0cNEjJ2nSy9`ru0ZMfJaer-v*_yZp4g z22Lgru!RZPg9e$$D;+S9dj2d1k8KH1Psc`x8zO%`+gkqGEM{CC5Bk#AhsTy#F(dSo zz3`pLhf|Pf1lXISoSQnA^a?A(+PCpLCY`=S$3Y(}GFCp*QL@6e-+bKM+*sV~j3_E+ zXz`DQx@hqZf#PB@A0;Sm(2!2LCIvs)$UGGqqSUjpMUP`LB9{Y!$BI z!*!V^)QvEHf2p1nExGg!I!52vYFevK z3fZD}u}-N~p8bBqe%{G*nkg*xT2T=lZ#1i;w%Y^ye3WV7=7RGU`rsfT{~pdI+n@@@ zux59CAOWBqgrQc1ETCLo4Sn_1;-?thQcF;M+dVFI6zN=PN-F_7BG-R|Z#|r93WU+_ z7lninCn^uS72`Q~cUUc>D$nF2+oNy80Vi4`ML%xrvUG*~qIJmtD9a_fWk9*3P_lyp zSG*j`Qe(}|_Piw^;>+KGf=GIyJm&)}IOcmH>0XZUPZ?Dv{a_LY&l2n82F@cPRRp#z z{l)V#ec)9a;Bm3m@#@6Qe&<3AB~XbxvJHMoOiL@H6jEhjai7YE^TGw|Qllau^2P-) zDxv|x;zmbd;~aIKx)Jbf@FQv(Kqh+8ZnYGa`IM+*dKv4_D|E4LA~K)0FnV0t=g%S9 zg!29_QL>2F9{-i>-I#x8JS3M4bl?K0^($+-a4#<0O>E9Q|KOR86!Knuwgu$&w@NNKf@;xIx&KM9obGmF+T%4wrlD`Yw7Xc^%R*S zHo1?9{X4Kbv270ij0m{#(D3khp8q**|33_|&7u3x|6l?B2Tu%korcSnLTC%jX2Z$ElmT}xf7%7wrz_@kk6FOb1m@r)Nm`2YjUERF79IJsi=a`mK59Gid3p=G9- zs?q$`sz>9;;Vo$ep-81tuI=R|VRd?so>=XR!b1a?T4%XOGZzrmMOMxx!?JHmyc;-6 zB!eH`7-~5$0~H=TyiSl8+8Ci0?L_&4+hft~Cr{fweED1`*aRe-#l036 zbZ}|!*NNFY9%#3P1P>>W18{z}mDx@ef|?tQ>KnbERmP;xbv#bCH~!&{LC$+|x5(=e z^b7O_jvsq3>`k*(wUTt*XoXEf+E zuD=qT z3c(JvoE*)Ed7C1w+G5}DXP2&y783}~oVvj_VYn(TlFG+`#Z;F;2ixh&L1-}LYO%e@ zGfm^izgcJuQa;+}4J1muclR$5R@XQUI_B?i@bGBaI1L~aA5Vlxl8aX-A(>4s1mw9$ zXwE^w!4qi^mJM>xM5cu;&-9rI|&m4$a&tODTVpbnMF<7-QTmI^UUxmb%h@Mnqk zr;**1HM_NAf=6wtnz^9t^Qf4k`s2=(%B1{!4(t!t?Si7`*L%`4P zLP^uFgm>nNI(aNsGh<#7-q*R#J=40s(Dke{3fmUubP@%JtR(IlNEv(_4vTE0*ckfR zN`G~-0pbyBV*okVP3FEmVH_`ek5#V6@*3L@gY@UGdR-r!dx%a2bFk3t0K(_fVe~v> zla5%6*94v~_{cp4TYvr8G5$Qgr&~v}IeY-@KUjfh#W6`oI=0(D+u-nkYDmi7$zFJj zP}BjEw{N^L+_?9p$fU(dDU1BZtRyS+%?g8xKN$Zo6&U}x%O0|;*JTIXgwIkFTEY!R z?_&V4m|g+4>t)Lq*BsLnxc1iBuRP%d7xcIR(&*K6eVjMv`oF*Ghu-gUu3T{F>tBBO z$@VP9b^*f@(DV^>QiY0{&(iQJg(a`5tW@)%y3x_mn@_$1=wj=I<@`PEU`j;?0k~*s zI_i>6e_wroi@r0*6T2NGWQzS57yM@ZvxGFtDN8dPH{(;h0XsXUl>(w~k+({FK14Xe zO`P%Z@!+6*TljcT8tEEuN=q3)5HpuNumw!nLv%PmTf<_IC~ z1FW;O!R6Hz0MrdKLywK;b?6P-hSjSNDZt9{%G`NyL^CFMbHe$(*F80ox<19EcT*Jos3$&zCX^?sB)gc|~i%%ytpaNT@wY?Al9G2EbefT;?hnOgF--xWW zEDxqgUj6DfjjWuPxxZVZ1Ho-$T{@q}CMZn#gkcXi9g@nbx!1tme7i`;zPpl-6#7a) zKlHIr0oVBpjU@0~tAx%cp%EPd2}-v@VfU@o{OkOWhTpH(dM$w>d3La((rb&sQmYzy z&&voa!a?U?7L&8~AX2#XiS?99mqsau&c9T1;KcYN1d3<#l?i1GagdHJ)t7zuso7j- z)ovdqiSdC#N+VO99`)i?y=yMkILdi3!pAguPdG0;4@l@&*}E{Qfq};XQzvQZ6TX7!zvL zAzacjQyBi)u0Yx`f+2VQCqYho+};gJ8q=ePJm>s-g2d|vU2Iyz{mCEe#Wu`{WY3^7 zQo}$3#%Nd9zb}x(@TPgNWI^|KPPl8Ez_ZJh8vQ*V1#oF|Iu`6fT6)+WgS)#y?;>4X zR#|Xpf&KXrRoQNX{n@v_htWsNfeN%o7SPFc3MoV2np7v!6Pdt5O(QDpucK5{39y9r z#bye8+zH=ffs^=il#k|H2D2Nj8hix6X=QY}ts5!W~>~K3jYc$PF)?*bQ zq`33jE%}><(qm4r7k^iSci)$;+JN!A2nKY6pH0f{k#5ZnCC+p=oC&5!F}wYMR+;nWLe5Zfr?$QekG&qZIgBIPXKniVbA)z-+)QAL@iuqHszN3r_R#e993U0q#Q zmRbc;k7or*UniG8;p{6&f=uX_5y(82dJ@VN4N7%R$i3&P;aQVYb<$7n=6XS|T~c+9 z+2V#R*MCg%U~(I1C3wF9ZJIeyBhd(;5YU2hZ|~!S=W_R31?0?LNm>CEduQbe@rF9QCdvhI>Tw zbsRJF{3%giIgEK}FjuS=zH9wObWYJgm`gP&;h4GmQ5*5PWJ{X!F}@4wk#6wDv*ER5 zCtD&`DKvrQvgy%&)Fc3JD%7MB4W66#SFtQbZ_bX0G4`&9XT)1M<}RU9>t&@V^b#Dk87_1*4}!#(eH38yJPe0=5@14s~}e8T?wa?H_6>iTZ#)L zE`EOv<7*45ov!0E@1x$D11zyp~2LSmF zJ_q>~kfY%0ysl<8{N&=&pNhpeu!&sh@Amk88^k$g+COfuX|TPxQohd1VBWW2Ihb-t z{dsqGM8%K#$jGY}K1iGfL%{xI+UH+_83G;CV#vG0XkU%ltV{Pg)jyiTZNfiQ;|IO( zS~`Z+0Wcnbe~OCsO4cAguYk|90I|SotwI>Y{VFryRk=0O^98# ze2}h;&+ONFx)~kZZfe^GfdU*S=S?S6_V6 zlN?dkweE`*o6YOCE(|d7eCu>T+9w3i`oN9`1L`$>lAnlW$;JM#I2+IfoLfil<glK9Uvq#sY|*?1<1wiHaB~-A8*LIChS1(-vvw zRCNpXkv@8Sg6kWM9+);*hJFeLsXyNUfZ@l;px3?ApN$d7x@9(NJCFDJ1lU8~GD8RIVx@87xz69667hbh+IP)d22Jwn8%{Gg8`=i|{ zblMdjC_gam^5%pcFqrfcfI(0U9Q6D@);y&Q_~*Inr$4J^s^V0tFq++R^FvggDa znXI)W)!^N+KHqHv98eFTRka8}y+*@m2>knu5T-H5A6;H!>Jnzg$WZYp0DrP!5)wM68?-uHIKj5S7sLx#xiUN18aH#K``9|yspD!@tOQnd=7T_(g0^(LtV$e&mNBNMDoQRc zAt3-jrJoHN!{fJ2OR#kmCF&Dq!r4Gk{?E*Sx++_kvZh}Ta+qt~{8P=t*=g6h+3KpD ze!O81eIPEPF4{Y2xl4Mda9;a(@(;GX{I}vT(x0xc9h@*yTT2kqY68#%3(DPgL0U=eBi%eHTm&7M9iW-0UO9csU<6e z!A*f~euM$o8_)JL56@O}*mJLT$}EZ)2I*HIE)|p#-m!+u@+?3V6cQraz>N4~Vq&y< zIgZElwzx*7@sav%H{+R|e%zu($7;0s0O0ba-?z2~Os}Lv{&f>yOa`OFy{XRy~n@cB#C6z(n&4UK5rSjakJEIA+Ig|nJfZ-BLRe|koKBMe0xz{rquxBjzp zNgQBLPS8_&*nHn4_HnvQ!6F=w9dexKk7~9oQ=foF9lxv8XB6 zOKIns=H-f=9ES>!VYTCWV>)4QGJc+yv2?)#pPwP)dj)Wx(sH_E>;{SNVgbh7ZT7TM zo$DZI>aQ?Fc~~P=f9j*b*zr}-nLL_BbA;u;B+GRilK$YJ=}-hy`4vxuxVZVZ)|bC_ z!Mq20-|e3EuO0wR=vCx~X1jwBVX2m{Zv8z=H>qK!H26U1f}LD9IYAimuP@|isi9M| z+6rT)&i6K^B8GD{Mk`L?WtQF&TFIlI0^Vl`uHk%5}u;ETn z^H4C$r4pd*!3wMT=|63IPoyK)CyiR3n!sS*xubL@`9t~4DFE4B+(By8i2CP(BoZJ(u04soaqNDjQ0YEII|EJ{ImuZ3dS%aWbfkfT_2K>fNX>|6#AlONp zg$zg}vz!)yI{Sa~E`76+6gkYM6&4XNs*R*F+Q6xe)uGMx<_%F29u;wA-ItBEtawLXg}# zTQHO2ze9XDxH+g6pI838?eskoE87$%ZC;Hs=*fvr`wKW;O}t$mnFpQink0(7DZMRcZ)eWevLA^v zP>#%1w0*=FO%P^WUs}#^IeJz?gIhNJf;;QuF2|5ha^>{*SG%9v{_+*Mp1lDv3a9_X zbbZjH&xyzoG@Tz;d=T>fH$@R1jv;8h#PfSD_SK_gc)J+UmZmE*v)%Hc073o_Y5=UD`_!`?WCLmcGCa#1a+=1zr&Itp;Jz=)@Tx3Z=ni-TOG0 z_sVp^nTtL8Q@|qBj6S$q>(kuh{gPt=4wCQ8{K(GTwtLv0eu!#RP@i(T)GARG*2VSc z_0Di>ol9Q)>I|r=V@|QH>#+x(R&FvGB?%C5|86d$k@}+9sz$BY_v|S|w!p~i3G+=? z#?2w6JmrUvpEfv0;%mbk9z-P4>*6_b>gNW4J6J3+?Ap&__?ruZg)s(`f!13V^i&F8 zUwe$etC1`a0(p!j6mr-oj)SD_RBDtoy4w=o`+Q&!QAg8X0Zhv&X?x|sIti@*?>3xQ zvUO;+z!c3Re0G}M)N_Vt`&RcepwV9EV!6Qr$8W^ezWCa&U!|Vc=eB(fT7Q^r#yl)4 zwz^XqFp5u0l(ET!%?aTMl~q2SgArBc{OlX94GTMNfw&j$dlwFQEn0CYB3Yp$`7x9U zj`|rY9W`}peVTkhn@uKH0yn)WgKCVa59M<6_r2<&cQ+ZcH_H}x?X{ozAk?@|QeUQt zZS#4%;h$_S_MRADuF7@9449#%x^h-k{dAEn`-~*ehO8~{>4IkMdhOe&@Eol-Iz^A| zoRhW3*XCvX@&Jg|eDx7k@VpK|A<3pFdf{;2Z)%DjJ!6LN>Z_vYTYs#cd*cT$pNj}S z;1u927Mx+9lf$e??$a*pB`O}zZfUlyy5;4cNqKtupWq#JB^Vp$GckSZuKq3<6omHB zwnMkpryX6lR(e1{>w9 zNQq>q7RnciZUu|W>gyS7oxi6_h~Zwh9TFazqG2B(O3oQ$%J&o_`bkF@8y4jL zgp5sE!ob1ljhRzn;ffMYo>Mro+4%fGo4tXKCx?*?F zRwQ_2t%;&v%p|?r0RNc%xs%+8ZV(t0w36$jOG6{rXLd8=F=o5Ubb8}V`)dhNp63ta zE)@wEq)VBoIsavuVpQ5g%M(&w%MO1;v`VM>dKAMGa9^Bxt0Mn>F{#HCu>&hBrECj2%p8ko;;B}~tQ zG)YjLtZ09a62bxnmN5-N==>+P)gjH}-*1^{)*xKn1na@pP?}{X8(308DwX%Etwklw z{kt(|otJ*}R_!q_Xi1XXMQDOPD{<%HAGV>z)M1xmJ}spU`FrZ$NfeEwfW+s< z98(2jy+|IS>Wia&#pU$-P0RH}b7+K&bHv%1hfBv-8@@<5Sc&de;*Mu;>Q7a5-Ubrs zc*6nzOVdOwOiF&twBcihS@z84MrB#{wCDO{^7kK`_X)Ot7%nc9c%&0;Xz0zy6OG(g z5ztuBz11lrMDqHc=e_1aCgH1s=(hyp^ajGx7qdN%5JZC`fs2Yj)Ii$AYl7ADsR;>w zL~eS`?d$`tIz@q77(ATi=+Im2fUZrKhZgde<@t0Oqxmw%zEC*@!1?|y(^3CnP`xkbJ3VkYqoZ!ox@emx;}_WRmY~1>f)UHuOZ|)= zQ;bw)a*FYU`a|)nZ$Y)ocF`K_*m|o3s;QIsuOis7yO-OQpLx4H6g)TI-Tz&ErLb~L z;XCBP>#|?j{9dE{+GARX7t5ewuxi09{zEH!&Zqi>=yNf}0e8OoOR@R}NF?XW0P@CX--&r^b79pD@ z!8|(2U)_b>BfGk}JfCx9u9etKVZ;)S9Uq{`SRoSEIlv~7Gg<3$GDxO!h!c9Hfk2s-%d*}Wm0=uZn@<9yIq&I=KR_=}nh~xUK+5wB}H=lL8fz#sv&G-y42&g7NKNbP#!L ziK0`UKA9FpZ=&Z3YGPnyq@}0tMQ+vekPZq8Vq#%25HnL)S=U1Pfxw6HA1na$#Z`$0 zP5d1jZf;Q?oaB}q+ihusOB1a;h*R-`3_c06*qMf z$5eLUJ{Ki{WLR0cfLA`g1oSMm3*AdbhGrc3yJSKAAXxq& zu)C34f3Sx_y=lbX?L-7gmlk_3hRoQ?p-Oj7$}>ERdk%$z&v(5IGrd(G2*4NA@is$* zgQu4dhXd<*oYFHEnx9)jja9QwblB@O<0L;)2G`=u^;Y!!zXsJNtdM@oaN3OdBdI?%Kp33Bc0h@TWja+bWp>zh*~Z)p$Geno&Jlv4D>4?< zdqWhV%F_!d%ASH^Kg#eXD)+jqrbtfE^q4rs8-`Wj;ziJ#fb7bFQCRCCY`*W;K=47^ zuJdpzG(g{XYc3@8C-v3t7G+!K4PVVWo)Sfyz=}?io_AD)wRS{~>=#}Hp`uqAbUGg z)JIQlQ4R_=fzLJIwxi)o^lIWk(d{%Oq*_9|9zjh&JG#yt|0e&%=(<3fR)rjAz&O&V zm`-9d9;!yhkNBmn7k$Rb^7L~fyQ_7tTqGG^x)`&D)~(d|!s1nWS6^Luso}Lk&ZOW! z7tPvlig^+c4Vluon>IQ-+itiNHP^Xf=L(>?tsH=JBVgQju0RR`*MlwNDaWE*VHPA^ z7$8RRB&UO0B~T<1fa9w>h1uP)!z(&pOLv5uw9%FL9u`K>VS{DEt>2eujHNwPE{(~ltHG2C~5?08^M6-`uw+YUK~#ej-H0wB|cu% zI1kDsU85`uq2)x;_UqwZ8~m%j%y#B1osoiN{8jd~)xVcc`F>>?IB~rhRz)MTyg-zh zYkKZ5^aISQYKVKh+_O`8xQVF%BGj69e*9Rc{YvvLo zEeq@p+b2JLsMyQIEF7QvhqKykj?a(9ue%$k{AL%3yZKQuQ)fl`6zk(O{j_dS+jO+c zP>bNycG|i{`PyyMz3>mZ6vU^$3xWq3kwF7Qm9>M z>Cf@Bgmo5@-PEGoa^uY(oe*JnZi}yR5z9ZidRMqdxlUX%N%;y*!T1V{K%wVhLp z6-LjmuC!1KQ)JV2flJ6!XiRbOi&2rAie#~etKOfB#_hF_#96q@P?L*BE-W05 z_k%YwO&39=nD0(O`&!Ec@~ODIfA)wRT^HxedrK&%hjZThu`s-T!+vBh54taNs=9G( z#$Mj2?@G+64?0pr;}cn{eOr-_(*l-2qQiZT;Nf<;2M%Zjj1s>V=m^182o>?3=+xAZ zjFmp4;(7sxVp-x8d`<4oyYy0NZcXy?RhVU<4zPYkqpOS5BKJFdCB2ZW=xvFE9R zcbEq`3w`c2Lv1<C`Mp9AoJj`O8Ls4L4EA{0#2Gg(S)bBGjK4zuvw( zdEf{VAsaj#IrJnR)x0=3LT_!)TQ#2KS^eUHHyr<^$74KiLYygqnvH&(dSEi^UG$_| zqGWF?4_5%*CM{5!wPSztUbweN=M}z4$C+=1XW0SlBC0 zNV%3IGoPT%><)cIDOkZ9uci9Fd+0N>qW zMN%(teI?*&18#nD)_x%?dy1Z4+i9UMIR!3+Q%8p^&rhzduCUiPHi&<`mG;0S<&9K* zfL~1y{R{Ic+cHWnXn98rwK|u`0l9O z;d&Z&?+mxeNh5s}4o2KP7u9YBBn@73@O~jgKnl&VES6N3p{JqAO$~s)-|61p+llaD z*UH^TO2P1l5v)Lh0`VRZUrjxP-`Ui7fkA-i|1a7BLIixw=b5J39bucP?3^d);2`@1?895gy z*b7RjBcP#q5uK23p<*d5C)ce+86|2WYh36gUW`Hag@n%}^gG$DJbYgIUQ@NCuha;W z5JD*8aCRuC;XsLLPUw0;yVkjZLlHIJrKW~z^fcwJ;b!aDZ}5sGm(F{ADsyg57sum( zN2PIp15J-Fc}lqy;_nYP%6yc1tM*0iBX_Jugc`m6_cX2L{9pXZI79hbJI3VR{Jo7hUO{>aKR_e!9MpV6$BRXleb!PS*o zoHdY!kBmhQ8;&pSNjcgc)Xq53Q2NuGzlG|X`z^w1zHT+DkTFd)2gQ^2P%M{7WSnup zqJ_xPQro2fd#>0#Fho6JEV>k*%eXr zha)-=`N|UiTK)UY+b~+ z#j!@;-2RD*2mMV-R3O~my|GQ98`u;N4Pyy$ko~WN%dkD44tle1yt`NvcK>{QZH(S` zogsa@6|$UWGYm393;OmkwKDZY-N6`=`}G0r-voCEo6BcI11r;XHZb)J!B_F&xdxoE z8G)EUUg~6t|5p%9(+;?=f5RDtQL?n`I(u>2tSHE_)?eTfFP}dd*JlE6ggTBQr*Ilk zD;Hn#q_Klc!Dy+u$UoNZ&d$h`^321UVy=6F?LbMzKuIy)lyp!0$qI<(fJ!4W>M#LmA~d>a@FfE z5gkvLzr5Dci6|{)YgfYo+u#Ma$L`^JDQ<*YLZ11D1N?8RxnA>rAMq_DZ7%#M&(Tye#qlBR-KI!8Bred*zE(oSqJG58_ICdX$r>%*tYRk^nSi z8}QqcH#U-`8ZixG#~Yj(xY-eWvWe_q7hTt)Vuu#9d45Gc^NJBcuWuuHlh!v784~I>9bmHK<6j%q8cG%zf109D?z{0B`=Vn%cc`n zh%auOXA^zWG@|~SKD50^0d*i-b}@|xVqQ$l{4?5kot(vT?iP{z>C-#27q^;anpD6t zt$w75I7Aq8|5PJhkw8jHbbR{zXLi`cJ3BJ&xIXze^L7Rxfp@EDpM;5rptHV}*~{vH zl;*~n`i8QWLM#X3hYNl8?mZ3@T=&Lgt>rfb$s}qL3BkRCpvRRC_-DVY{(k#?dWj?( z5z2Jz|2mCb*IH6Gd^ZuJWyQCvOK`aTMsbWG)A}u#fWhT078eAKtqoK~bQQ)OJjQN3 zzP#qWsWtl-s9v*mZ~| zdWP04!ZS@+5rjhKJh;Qgqqh3urx|R%ljN;qqHyX3=O|1@exrmLm_yK zJyl<dw1f9dT^+a4GdnRM3_ePN3Qe68wKFJHbejP*s~Iau2+it zLA&I~+P57s1Vjk7E%n5R5tZz6^Kp{a-coD-fs8P?r*|~E*Rbq~dp_03a%6=yxc@w< zjetH*p0@s}q#@K{^QF*zr|qkd_jR7Z0X}4UA2(N9+U~C{!0zeqvJ+3witKrATR_qO zoo{V_NSjEq7o6f^6NQ)wE5({}aE)^&Khq;U-MC^JAcw^c##Lv`rt^r zj$GnsKC2r?N3S=J`d~dp%OZ%s69zSTJ!6#q`gZ_1%hSp z{FuSDo+Cvx((Ffp-LZVnRCQK`GSwwps3?EPvgHG;o!!yWoqI!(i!5uJ*F3wtg;s`! zxHvpW`F$vBXeL(jhcqir>e*IcON7X3@v@iuLmZ#KdpM{+ynj|3RK^q~!IZ4`L3dta zaHLp$JtwsvuMcXxMpcMB7DcMAl!5ZpaLaGy8{?he5rNP-0k?(W>m zT6>@GT>A(0jH()=_txIlhuGVh77x!;Sr_x8t)@wYg*k2Mqm2=)F zeYHo$V-Ld7Cl8F8H!Nn6t8?O%_*X($<@?$$gsRi+gAy*QRISg8)Rpp)b8qT}K$s5c zZX;*Yvj?Uh^z4g;Nx46GAceY%GyMCzaPXaC0zzufzHsZY1MD2sI03N+4{;!TSQyl- zFelpOZ;6~{LBBE#xZGg}gRyFLRK0IjgwTACj{h8?B)|)(ujf$v=VLB@$!5m|zGj~U zSW^SK+mZf1=q!_8)afs3nnqnehS8X3ve#Zu#27ULr1 zEC-i1zKoO;vvaZ^L-*)Pv*4Ni7;R4S(8U3Hu^y`JPzy;p&614ObU%y=DS`xJLL%Zxpg2!HcorJS60tt57vG3ZCT(EA zMAjy{z*6Ep#7=c^U$vg^Jp=@Z_gCR;%7=|>+Ye<`zP8`CY9D_dXnc8 zA_g4i4b=GIkVPF)DJdwu#A2~Jg6tTis+20_jl@ujR&nfuKgdHnbpw&FgYUjZSQz;j z$`F^9XzswmSd`Gq8OnUsC+;vP?kju;t1&vb%Om>4h3`L3YBcm{Xr zOV5IK{uN7mqn_W9hy6=Yy@M;(N5Tp1{cv zt@0Lh86USjJEnO9HIltwIAx}Hy5_g5rWZ>Mj0iM*N-@{Z%>*?ya1))JgzVh`B%p;F zy_ZJ?r?*;yI$(?jzAoB8X=eRfMv@UA6=Cx&Ho7X*WE=_e zyk=H!p0S#J$kc_kzc#-X#@)uQ zNlr$71&!O*(!0IOg|#k(>IYYO-VP{OOas25V2BAmsxt7hi!r9G!XPwVzjqya{RTg$ z?a7~XOS8b6%Klv83o!@mP;0NGG{4420S1IyP4th4Y&P~zyhM#-RjV~oX-13pw3 z`b&D^j6~ssG0#Gw>wc$K_;QzR-Ly=T;Fd0Mj1C&C*NmSvbU6mg`|mXZ%68Zvhu@MY z84;JE4n{%dW1U7a@9a$iXd=)%MIg%5^Ap67;z5cFe(8DUlj<=C`q|QfsYu~}Kz5of zQh0#UEonY`c3kmMk0{1AKX9=)fKUeGuLWCASE&R>b4b1tf%2TmaT`i(eI!Tpxvf;u zSbp(;6AMEZ7Yd7zV-+c9n^;Y|MhB z_?JrIJunEF>VIQ0fYC-qvmzyWT!kBl4OFQMafnjVaARaJ5K#~i@v@2qRRRd18uniP zRFFQ`h+Qxw#mMF=%}3us`H>dbha$-BBkCg|z|ctI%@dcg%k@3les)`tHk6|h1iwG! zxaj!7LzK+HH(xnQrG)N#kd7_j3ns&gMhFjAs(v$L+1mQZ@p?&~rCp(GN;DNhpp61Y zO+@rfAgCx0^3UTP@=>yK)P^kBwL#-&p`4RKD&hH!Zi(3@dsUi3ZE;W>bwkv3MbJy0Y!WEB_ z*5s3yvT*8WEz@`tJ46oIZJjpJr!|*?ZC2_TFQtk^cmrWg8`2y@aKtDJrz5v6-d>p|K;)$&ohXHA54I!F{h?x|Sy^`4C0^MGiAlIuL8-55)F`{TT{sbX?foB{(qM5FX+i&LyR{yfZr<|S9Bh(XXG|6 z*LVRr^98WTSacE5E$VsF(6zTOk;lUb#OiwmP%Kc$#YoVfsb^IrmfXQKl|md{x{0n> z9ey)|nVJUr;~Z!3%D+B~s|FArHJ{j8Au@6e7>D=YB$BL#vND6%g!dZ=9o?gm2ISxH zL8bhggJXUw-G1miu``eR z%V{faG_P7b1neaSc0WRN;$>uUwg#vv@tRV$ ziO7sJf9{=A({aNqpx)9~3Zoj+ZfG?=uz9!=Od5xBJ9`!*5Zv|eyt|dXx05D=f)4iy z8sZon(U*(69%Q|RXwOoIx4hpUbNLg+@!Fjurg zgJxyy`6?>OFy%UB=WwJ$nIJ_ymSkBT zgAg|7pCRr#?LU~AtZNhF(DUYpTASOBt*a6m<|)2mH(<_9l@4BMw`sC$_J!q}x|sy(Y{!{-I+u>1XiwC^&r_?!nX8bX)( zC!P30tk{8t2pQD0Ok{HqM@(et@lB(3wJ;yq&aFK^?|r(=)!2KDUd)ht&ZBLr5BXZD zMUy48Tf`vZX4+wO7~I2du2rzuC5~6p`_<(|zuM1>MlSJC|1pcT<)?bOmf1CHQZa@FZ@E)}16mZJY4-&j=J@vqQfJTlB10;Bgx3T_Y1!R^Z9%*@6 zkpCfNyY&QnO^95vwchpdd2&} z3=iFYexBK-oG=?K9B8Vj*4l0uLEkR|AtYoJWcM>ohl`;2Z zl?l4P&<(Gst7`ZTDMdn{)CF^ak9xY;iL+?x-Hb3(LHJX7Hv9_((t+u}NRZKCoeTVq zJgx$2WN+-;cLx|#QSzTf$P|T==-9(&auw=#Yk$JxFJSlg)?d6ix%78h zTKSR7>hbSN|M_1lZDo?TJP(hjA4%yJiah`*i>U^QcCs*9*uOkBL_txV30C@y2Dw@) zz!7N}JJ;ZFWipZDO`mEphuw{`1<|${VgG>^WXvjUKN-Z7js~<)avnEjhPM{a)(t-F z3i_4*WdU{ygVb_1Dk0!*9N^g|&{mYlLf_2WI9YYL+}+GVYWWUv>sB8C!@{KB;mJ~@`E3bR?4Dw}bVdd+zUF-Zjv6XLFSa`A-|pDy;h1am&lD-#!3TqPntd{I zo~%HpBzb#)hk!B(^cm5|vluuZ_b0m1)I)nyBi_?$WavoZ(OA7|Qg+ATi=hpT7@}Q| znxdhP!jtQDd|bMEj#Bh?Rk9vww7MGsyT zrs4V^NuQH$rC7S$XrV)vETX^qhpbz@^$z;Vg|J~F1do?{^umo=$=CdVmEYfXz+@p#1X8w(jHUn+507pP)Fxw=pvNsLzcI>eIwt$!Rw;>Bi{J zU~}v%nhdP)ccJm)IF|#bb889zY5d_Lf&K9>^ zU9GEBkRq<&vl#eQ3mTs2n_=SVm+Mt61iLmgn zaJ~N@3kMiB_8-Kr6s|D-omTCf}q=mM9XmR?z%tXft%p$ zt|gqT1m;A(m<$h-(2Xs)Wi3yTTKOd)B^GIJFi~~}5z)#`ak>Rt3ml0haEw(4X z2GOgP1vqJY2J(vGKllK%6<`+X4l}6t)duzTOg#Vhi@gJKaSCv9(AoBv1~zGk`2;D_ zf{%!^Dp2NGY5shy6T^r(yCbvFQmIyKWHV~T7~6!^NhfNb%4`b-9Tv_a7wpfEZ<7!v zEcYBIZX@71RFmy1Xz?0hMz5698s>VdhM@t@J}F^jQ@iJWwdgw-FOYM&H2sA&OQ3v= zYmfknLF)V6i359Gli;B3;rIexzWX_5H>cmKf2%CiVj(PAbZH0AFYf?Ljm}ox!z>_jUmqK|j98gfl?t1S>|4M+nx<{YF&2 zr*0@$)bcvo>f1GPO|AJX?Oz2sz@^ohcQ!d3{I8B%+|-2YQ8^lbt;iMjRhN7)o7a)m z#q?wh{Oj;t6*rd|9F3ODwd!qKj)TxL?=CJC*94crCp0(lXRYX%OD(|A_jCire#8(C zfFMr2t3V5XOQosm)*mC0P-TP=4CmCll*1*;MpaRo0f<2VABp^AW!EezD!fV`3(3Uc z%VF^)ptibZDlo7ZWRaV`+4;x3}GHtT}Z`!`D#l1ciNL zc&I4ib^`2AV4`Zu6ZIVP*C8D}s&LYq+%};C+U>sSn`9TUXD|4{z`+%HTafJZOKLov_vu&h}o{lc2+m%-rj%beojHHeEa@+wd8l4jB?v4oZ}68d~Wm%T5dL0OY#600nY} zGnudmnW(*lu3>9Z`m^VQm7G*2YLBA&$lUy1w0vl9Y*-{3^~s~}GX1oZV~P(u4{K6y zR9c0A%y-s5>i)l4YW5~msw8DDe?HWUtC+?evYS|H#j3fIN1gwkn$?3@Uf?DEt9{UG zRYWl~{|hRN>X#(weI1)aPvNi|ylLIb^PdQAE}fA1PMy+Afuf}Dk?FrWSNm6nc+Bol;AA?$0m>8R0t)8*+ z*S{86K3Z<`Zs#K%?W>TkMc>@pZM5e#v9D~ohC_@@;lM>gb;GDiLt4(Ui~CHUX(gXT z4X#8U#)qT*uu$Uw z&<2~5kP6ZG=4*3POuRqJsuWFfFT$elKHh7WK+25@omUFXk;y)&9raMzmgV*I0xVz}L&k1j}ainC|Lu8c3Jkn4%%4ss_@C@xeE zShX@OrtH_KRmyMd_{fAu`q*%=9n;p8V0odUCV5lduO#Kfa5q5~bb2$vYyr88-@xzc zb2%2gIgm+b_FZ-_mk3cY1?!^xFFHi)6V4vyQaK(h9>KtDmFMZxVR7m@ahA!dxR5P( zw$VCIa(JaYV*pw?D9feM*R_H4N8jN#g6kg4lr{Q2J~l<;Co zMwiJH%Y>R3ghga%^5v1HCD_vq6>8}U5mm`q%xH9j*WDUmKikI4L=$rlGSAAvI4$6( z8OR(8IHYZY?GnG(P55K>;PrsAp zg2~6Z%uh*!=u(TfET6I%j7nx;WRwhWLNGDK`J=537oVIa3ZTN8SmD>9vt;R3H3A+; z7OJs;`k!#vDX?Lq#7_Yk;BM@SLW{MraoH(nV9+WS8u6wwp3b$Q`bTnU@w=ew$0 zp=RF_l$fh918$yyWev-tJVC*W&H9mCZ|18$xtX#@IJQvc7ZMW3W-axgwtxAR5)bUG zR7>x4&U^L>H)Xv>RLH{S!`f3n*04ZB?{pTJXHfu_)zJDP|=zB z*>56bjDbO99uEm3sCI@<0U5*7;{?CbQde&;SXNt+xbxLj@5s(Oad+% zY(YW6&p~T;osS{kKT?O(jO~%P;xThKQwtdMB?Y$|rYr!Q5vjT2uHq_|Ymf)p-V`py z-3p+zyBzSK0>s5uYoSy5UV|SXyLmS+O9g)1y#|1rzj)4jgeKa;ql8ecLxfO#!xk6m zU1wzBa}xr>IkjZT=@5L*LL_g`jbc9Zd|_u@4_-Dlyzx`Qke{hBERU7oo46e?>kW}S zy&4HeVi$3o^9HF5aNR-z>3AQ&;cSDKZ|#s%NW0EzHr(b_x!uq2OdB5flr@&fak8C$ zMvNvT<_W@wlPlH&@R>&QAz{A`lMECqGLB$-XZ0e`*<^m6J&HfKg|F-AErdL$h=AS& z5^3;pfBt}qRw4=-PCWC2 z=rz&Z>kZ{wa-bGB)4Av1m4R>L{2EKBxDaVut|$5hE6djB%@ammUSO?9n4IUrn&&^j zUvpSlH2e1C%@aW$Hr1P_w|;kkpmdag(|2c}@cL0HhibQ=pe^GYfA=w>P$(ElGWvz0 zzL3{oel>(Uy%Zuj-~(eO&z{7?%2M3U;aNVNK7@}$Jfvz3RV((f!zjDtJ4M)!G;Y~< zAIoHsXk2UGU;(~p1V{(DO~)y7e043==W5#ip?WCm;fr9B&)uFG?Q_~qD#(?pApy~p2m#-(6w(!%xI?B5M)Cn4I=l^55 zb-l2tz7<2aiz+T8zs$cROr&OHcg-9etvi0CqQXjzq&IUJ7VKb7O;gExPz!%Ql&+wl zAYm;_xG0(*eF3ekU$@^wRD2$2Z_0A`MjXW+Hj0Vb55d6YM=9{V$qZ6DN?+UQoz~4B zw3nSrHGs~u{1HiKg|mYap|1S?%ZHCCJB{%hDk?&1%eVv3y{alJB`p!mL^o>{Hr9cS9Rha#z5^j>%rN3a%s8v5?N${8`C-5I1j}@ao!(KyL?`C#v}FhK@(4#bmn`!2`yKHZ2oTFX7yRqQ0I@vp zB=;a|{B=tZXdMv#SL@JbKGqaWa0Q7kzykw(&}gV}*4Duq^jX5*Y(?Q9KoT4r%*P>) zF8QpG!F`+SfXj=@z)(}KK~so{g+KguBA(d(i|F|da-7%>Ts#jg2c$v~%-RRbG_I_P z)hVdBkU${NekxfcdOnh@N18Q^vaWJ~rT{{I9`VPf;-KEpLz4pEUnbe* zflJ999Kjdgzew&@AZ<0z5XWOkKs3ZpggS0GTZK#!kK8o=9xia7x#MJ|#A`^-OC7Nm zemgx(-f{3%tywsuh7k!8~zUL>zx{$Z-!aR#aw zaDh({`)}FbGsc_E9JcIt-%9u4AL*5&CQ%eVa9WC>u z!%T{yDlXX1+42@+7x#hkNG_W%%%tKfV`CW@OQkm!%MXQyFFJU%KEWjT5oQu;7KWEK z7HG6io&&c4lC2QE7R9RVUNU;A<9$C9yeaoh2cJ54z%q&~n7N28+hKOK4a}8Rm8L_h z%P!bNxK-xRQcDcAK{S;vp>F`IpOo~lr&8!yi7$>Qy}0)@$!G>ZQ~Y5VX-GwL1O?m> zlA)n9cAhZ$R5A|HR>yVf12L-dv#UQoy@@WubD7(o63p{^_`F&5&^$bE%XAx$E!1^C z5|zwtodDJK`YpuM>w_qtzu|+F>VG`OZ4c-}G(kK1-^~<3m`!zybEIiGEAq>7T0@IY|H7*$mkpj41&qGc$bJA!)pykSOir? zHztw%AH+=P`Hf7K?RQpCyJC5$g&HBbU|VxEF%JJ$X|hA(pFrGE=E!vpM;s%9X$xB>0vJ3YKmVHRYP5R~5aE`M*( zt@reAIn~fsbC7r5Rw(@L{kZmC{I10n-Ox+mO7)Pi_j2?;nuXS7rbChFI- z5=}_mvqmIXh_*zF5k?Nx#4vmPprD*D>U^}%v7y0?;S&@!nn@R0*Z@-v8-Go$Y6>nE zW3dHRMSb3>#ff=}cDkKm^}0o3R=J#+2E(hn{Wp+>maaQ7Mu_{RHnfSM7nI>^o$9O< z6Ru=n=!3Y32t<_$X}FVR(6Y6;xyTVvasep7G17@HFjHB4-qtDs>KZ)GXR1 zM8jS$Q{RFz&&?xVbB^$-TWqeMk96Sm5)l<$-Tcr=u$4-o-p`W&S#s>H%T_J zUrCYhr{ld~UHK2T5iV~oTM(L~un7B51X%3-6*=f(iyc+Siml(z^kcC+9~KY2FgRxk z0x7W!9{X{(XPS5lxAsu&Y8d4PD~>48(4-e$-@-IVdNF)3pUD|kE-+~} z8=^?ONULfAx9+>RVMGN2>|ao>YzJ(i;nyP5L?@-AY78y4Bc;GD!{0z;7OAweLF?*p zVfz6Rm=dd@WAL%u26d?Q9I6Ztd+i4p{vYm*nrZd+j4EfJwOB6tuFOk~u`sAz&Q(wd z-F1;3Vh?CHJ5s7jcDEGAwrX$dVJ+^T{t4ItC-$!4WVb6@e)M0YN9cc8kzjN3;Ai)M z*N49YDPT*=%BaP}`rxalf)LWA8eKO`M4l#6_3F(a@mLK8SF=~3IG0uI>TQAs`bIB=T$~F47Y~fIR)HRx4i@MO7B|ed!DYW)^`YPq=HWa>zFphe-_`}iH>!ldGVRQIjoj+2jb z!wFy5zKvr_p3S5XKbn0h;tu7z(XA`F7Jf@Jnq;n&F_wnj(V4S1xo5>A92n{NLwdN# zh|lEai{85+N(_{1#%t>}BRAa1-Zd+2chAoO2$z?aaR&$8vOGX^u=|_JapIq|^ZuZl z1>L{;{O$42ZSjNy4lSgH66xk>jks}Q0#|{ke=SdEWiHk^Mo&NLY+kwhs*=Oad031- zKcqxJa2_5~)JcasO!K=|O=$5qTv;&nJRf7Pl<^9r#!km1n8_fM3?TeVU-$T z3Ish9=!lA9>L%1kss*xSH({xq-QYXkaZ?^CiT*Pv!cTJXkA@ul!#~M(R`g4DCp8#F za11Q#y}Pq8d}QT&C`A-W%BZR1aX*n}Cb7nSb*pRCK52B%X~YJ%i~RfF1KjtPZ@dH| z46Bvh2XZ~ncb338;DKbx;kynw4u|`kZ5s2!B9XQX`0#wIrS_peZHLxR%xSVVJ|V)PqbZ<4h{j3{ngSkx^4!tvwoY z7TZ~YJV3Ue$f)A>Gk5pXI!*GsEz>^IXC`SW@8PhgWahQhVszXcTQ7F-BP{{B(bd0G zZ1~r4MxLI9zeJO?#Q5g{yTje`f#0=1!R=rH~jFe*R$?@7B%?$MiMHJt@V z9bY6GB$&=ah0A;lx;UW-<4)zVGt_LmaU zX*n3u5fDF^aHadO=e-q>+{6pnh+?x(hNTuy9=HKX;4^(U4GOKTqFg!}x&(y%CL4*y z;tQKVhY)SNn2WF?fx8!$+G&QgNT+bAJd|y|o9ihgjo1=e+~^ zwg4bS!433gK5ky`ea!*r79KwZxqXYDgNsia6HV>$ioPQ2pXTFSnnw+ScOKV8Cn?Q^?|_@G>eyuUrq#s7X4kU(Tb>` zg=NjPb-)c5sR1m;t7U2C90bXxGr$mQX${jl$$-nZ%`(EVd#eFjH1Dwxe!;e=gnEFD zLc%>|D^bA~*v!ADo>8KS1w%q(X<^{eymue~&v7$6URu*Ve!ORms=$_mzILFM(Gr|` zexe*yYbPyy8RpuFqbVfvelQxH_s=Mj4ihys4o%sGqnPnH{%c{jk(pL&7)->E+8^b3 z&K#|T@V5OmLo1P-;-ot9r(H2DM%H_hGBP5H`rqsMY;zdl<^-FoLMp|R$wdLkX7sYc zI1d5e%jZLk(6d?YJtq$tmNmD2;K&zDahAw7RjU0JV^uubn6u72GMp%W5wpY81Mg-9 z>)*o$yr2zuC;8q#U&;Q#9-fiMfw;0pyvZ^UAPD&S0zWu3^wb;WCkB(Q6djE{+!o$h zyH|YVi;RQReKH#wmCSS9$w_WkC`%GOHofOFWC~<#d&RLP2faxrH>Xp;Y4gU0rmi5Z zbdPprVw9xVCLilY+CJ*!%Q0&Yxu#y+aH+4cRSvB8T>BLDe^gM!-WcJ#o~|WL)(Iy% zd|N@K7`kx-K$LrR_0y^=ykU~>oaEPkQ+a&8d?bV;xNpm$O|Ef=X+)R1E9IPCN>p0! zep%-;&VQWRf`6;-i*GsZd#{c@l>6Racnh@95qi;$3hNKxrHKLc|3YPPj1el5QuIu4qS4&(X_}||PGQ3pB=lx_7JCZ4{J!LtSYq6pv74##q=w^EFUjq>klMU02yky_# z)?=&L6AHY~x<`fm@mfr>qO$^-0foG_6JK!_6Rk91nRxr4pNoe%2N1H^RxlH6j3Kc4 zKk*5Mw=%RT4Gx{X*1^bJ9vt+aL5etEZf%iu6c&c2YOd}$iwSkvI_6Ez1J)ri zb6W*k=4=~~!ufB6$=HhZjPI-UxUE3y6F$SYtk^#h#4f!RIEZB<`M(FRo6}MIe@2)k zK8@#0T<{bmu6Y({WuGD$x za7mu?fJ&QTZmY&yeR~!bnj*DHUisU%eM}r0z(pY)Y1sDiIXmIhU}z_K?I4t~)D#3l z?0<11=#qM&x#BZ?MU6b}(FXb{q>!1pPdEVeiEHe`eLQgi2qTmk;heu^C&^c4-5kh2 zg>oUtSVRj5jy`BPSLz_FdXxuX8YF3k zh6v61-Y;)cohXBEJ!>#c<$yUeJVdMmudY;6)FFRLox?HU6biK}F@WhOOZc+-=Q;xO zZz~(u{UfHhA8A1ETlAT@HH2cmQ%F9`hUMC?A97!enQkqK>Qal=upWM-V&e zv$3oG#k{qJaYiBJbP1FwXcjPCPr7FFt2?4cn3iHCy1^Sa;lj<1AJ!H^6fs}9i zy)LOg@I*Bit$~x2bhJ~XR&C9@gJ+Pdf1K~WIbPx~0rS5iw=4#sYM|JrV%6!*AA+t9 zX#QcI5WWo1?7Z?I}wO(dqXEiz|Nr&aJv|Wc;E=ipa3dX{9d{ z>=C?*3*^jm_3pYk*}a)}BR|u$yX=x|f7B9e%{D4U!N`q5$?jHQ0tjnf6TWnW6%`Ob zov$N~*Cp4`AJuI%&cKOKPXPn&L!${%1fch`NK|F}Eh&IMIQg8{yIvgSRbk*Ql7Td} z!2Or$BW@?Wh^?pDG7;xjy=M!0uK{Reh9VfLb#5Zz<)pjoRN>8CjbBBwQ4sd}V4k9@Ns z_va^A=@teqTvZ_v&Iq&Ji+2TJE~xK1qW?njeiQzEAB=*(jJ7bhWoKtc2&SgEfvRa+ z*E90=@>8l{erqo*{8E{YRUEg%nGw;y7Y(7WS-a|PZ5`R2_7gS5&vWSWT)ff_c6!{T z=3Lerll5vPi8hzo+rN#II%X{YNsg?TG`IO9m7i+;8}=FdUbSnA_KUrK#AMj>c@QJp zIK8(^+LWmEQIe!p9{*bhR!o$_Dktac6lHOyq3ipOshIvBvEQpSP2Nq*B*2(PkpbM~ zjbQTq^Aj{h(P**!*NcgML?5@9?Ut4Q16~3UVm#$$6w$uH`R+P=&`8(SlLa7;tIe}9 zyY_8TH!ZhSkqG5t0!c&n`S>w~D0G`59umfEI@*7=OeGQuZ*eaYPvrf0S1MWIWFRRe z5>vdzR?td12C|+-j98LlNT)t%hbKJ$7=juqfuL%M8)tyJMK?XrHaRU>ULD4u5pnN$ zdPGxm7=@Z!>Hj|fg1HuF#0_%404*pD?SP_-#toEKP_hL7g3+AQgLB`Qfp@m-l4j-;tk zry@)!DVNzE7<&C-ZUcs69$xIL2ch>ahIMNuI=%vCB|0)cI*UKZ<-`7pk`e>3XF&N1ZVOaAluR8bn=_o#$!A|)7@TwASb&z%f7swWM zpJP|OPbD9}WM_6YEaGWns zLdFUQ3;r^R$)I|RMoIR;C9;Wr0B~Jv9XujDkEd@{~HheVCt2k()Ite zz;5r-1pJ5={1Cz|tY}7jd9=R&>OFCnnekUjsY;c%On#COT{#pvR&dx4D%b~Ovx;S)_$_-jL#3)0Vjoj1f#6+L>XN9_m=sK@EqBZ4v9|=4k-NID`5CY_CU?7{4 zvNAA^FWY9OgiC@tiQyS*Y^^HvOePRn!493U0*lsg3YL-h){0&%66R z^L>BiPm)+neb~cvk$yOcR#yi`h6Zf1o_p6r1TS8Zvp@awf1LmRdvu7{IdwCyL%GyL zVAj2C1dBCft4RW9Z`K#Y`O{jS=KcDEOs!)P%~(^l1xYGAv;JNLBQXK2R5)1N+uH zAuN`ROo_pgm*(K3IiwMBMHG@_U*j!QZ9AUTP$@!tJ6?5FftCym4i?2Xm^lUZdHVV3 zfF=JenEtFh#jN|hv&+Zsx8Nz?@s~W5E3vbyRdI$cD$vcn)5U)64^LfqmbKnP8CMDr zboQs597R$;>p@X~s`=r3LL6A(UXcyVFsqx`t91R6XUZzU4N{L-g!e#8x_nWeUFz??DM7B6Js*blFnEd zj+AYjQI!O8w^xzwq^kEiI-xM;8PmjnIIkR4g7~bq7=o?PA4K`PyUDpUVe;~G(Mx%- zScRCktddFE6FU;RVB-`8CqYYVgMRO4W0^RXaSJ5l&h^cS1`*6^_G3vy^j-pvBmx?q z^s#=uP-yptYrkBFYJQ3DWFBf`5FfAeh@lq)_l|UAUo0Wdx%X8F;Mjccw9%XJaVKXZ zA&s14B7N;`xi%ts|IoC2e9thCmwTltJrRKu>&r25dZYu3ITTwnuIcm zvw-d!9kqi2@vM0Zv?f-_nJ@+KunGK7x4QmUr%N_6@gNfMw`cB^vp7O-4HJ_Dm{J_{ zSH+*epX%t-L$`!!*w=Q;tA*H{a$)e z7H5#}`t^|)8L6R4Ds1SCbf_T$ZS^hFY1Q8zk4E%dnc`bW%r7~Hwcotz^5CGaAsv)0 z%eih6Aq}ubma;u`izEEWZ90oBAE)1YDqGSkES4`Go2lMRvE)+_?}4V{E}5g;9a8%x zT+Jx7hb6M|qY-9%eewO_WNZ`NsltwjNOm{SNroe(%ggnppnP`+U%r z%va2_b$x?r%Rq{PoQ^K6?KFGECMx^I6QMwUh6B2pJ zP`+|nqc2=gWEc>!29b-R}HMV_N<*)dUuQHbYR;ElW#_R_~0uu_`UW2V(TrV;%tI$QQX~~ z!7ahvU4pxW0KqM|ySqbhceg-rcPF^JI|R4fhxeTCTv>Pi^{n|b-CeSG?W(5E;^W|P zbKkXR=i=CI>)O9Vba0-s|E%}gjxj_KmCCOhu6cko)cWJ@aqCdh+TD=fY#C({|LT@z z=(?w)v%{EwyYk!ceAU+`WH`n2_h-WVHxwV}BRwXs1vk*eojJ86X{Qi7W&!Fz@i%2? z(NZv;yY_bJh{(id!Y2bo$SDtVn&e4>UKmoZZ~eFw-tQXsQh!q`RcR{wzZxy$s=Mv3 z>O>J@MDKGUpWe6BxOiv5BxkXEh?iraqQy%`#kWA7?yW9njvN|qoD*;qnx!HL-aGPM z_+GKdrL&h+;5#4)+Fnd7bqKCkJ(bkF6GdTqP(Tur=MKvtx9Eq|yidJmg488YF#Bzg zun|ogzu%=hgV^KzJ$|e;qd%;*!8tF!1@eivVLJ$}k!!v<2!7_pK2fWx#TX1xB1%G) zVy_H)zandIa*=PkTdFgHeZStBb$f1awNWMajkQN8+FUm9E(@*cL{VSpvF5aYCmC@B z{Ib7k&l5r9sUwED&sm=Xk?n~=SBWFWfL84Z^WeUu(RR)+mJ@&C$NPADyqrbi_?L@V z=OquV;D-wru^FBMM}2KO{Uic9hxtwDf`{ND2=*{^!7<4|Jn%|v_qs6#OD%5JRFLm3(-1EOCpE*DXNOnpSsXMFlB zcl>WBoy9=HL(KNHkV4k8=dA5hiuxJ+rY36k{yk^FcPf1R8gEtP`aJim2;K26T1e&i zwJk)8?hLW_*QtRm_#$alIPMIpo63zd;eZ)m)HwfJJ@Z>hqUy@Pwp-@_m-ffe3}sc- zKwvoArqZBvZdkm5uQt_S3~{8iFDv83u2tGa ztwIO7g%BbZv1L>XNy|PsoUKZDSn1u8)pwq(6p7QT`AAKBxSpv(%W)qWamdeD>$9#m z)W7BB;e;acM}DHp`Q7=JKKl{8f9>(ZT4Bdm?+8=Iv=O>@t^-Hj+ofRZr@=$zE%&vM zKWexP0`c}5wueZY4CdQTdyRsp!cH6^_$vR3Q0_DMP1a4PjCfu$? zkVUGeypn` z{)$>r_ZEhLwA(+rDwQW=G^k3NV_?;+_z(T!q^~hv^HI3m<1ZL|(~9Tfn!tP>CTg5x z^2NZsrhasUk;$W*J3Z^}{FzZY3d_bC-Wa*2j8a8I0~F#vUVK@z#TOmUrX0-l=s)A# z#?X5fGGQa~h~-(rB;?ZSR*q~~4%P8n2~C(iiAazlaG_%oXh~Fe1lCh6nS92P=oa;O zC=QKW2QKv;`0_gHG^`vdL4MH|KBRLE#iYtN129;)xOs(zP>z#nVSg(KL97JJd=26D zZpC7O0llJLUG9!u?!Y^OA%*g|4(jxK_OI@`BIDrqAGG zcJ#u~%iznDD2~y-VcXE>CMaOtb9*g7Agbcp5sHk6!*ZmTR@bN)+Mp-i*^mE3{`J$X zd=`(Y7>3dUA@cfo$hU{gG~$J?&$BLN5N~f&G?!n{6J5lTl|*P)ZK@!YIm(@0_cj-S z@Se0?WqhYn8>^t7YV8=t^i$r0i8by~O=`K{cM%GyY4Y;&zzbMeS*Ff}i?Ly0T)3X3-&lL;&ww?S6YEbMzLOxqw0uEIu+>(E zxuLnf`Y8rNN0`p#+&$Zr714WYC1BvnG5%+I@vcg3(*}Y>54i9Z>RedNnfeA!WIL>m zv4jx%iO%;x_A(D4v%1@09TR!M9l5Z{RT!3KI2H?|$n(5$aS3a5yt2~2Fl(yrs=M$0 zeD$gyQ_-n!9{A}KR?vnpHXH?X`-j666re*n4!0LbM;EyxF5_}z_n*x;dps^B5K1mv z%7q?j2hsQ}W@ZFfP$Z?Y%Z1~?yC&Xuw-zk9Xa(zMXZcBsJWTv-ita6GY`sXxM%yhp6`eA+J?TEdIR z|Iq?Kjab7qMHf!nkI$O3dViupt6bnYAoh9clb@^a<%y6BB=L z$s=D;G3O4);O*~MUe0ch`TnRlC@uJt=hYdF$}Y30)$d==ktTf}ao1c#c!7hve1E^i zHuzzJLF>?1!i4MXBTUb%^&lSTtOt2aMKCQAH5<&Em?#)0e#?oY&v*%Zzg;irl&J>p ziV)W|#>2H46njV`)_Z#75;?IQG%_d!l2%uwzbv2LO7~4NnEHzupC4xUr_7VV`7y6D z3t0!PT|bH&V%BG>!CdL<)xZYMna5ys-u7h{TK{HC>_smPD%Ngq?}Z4?qU6T6(cg$= z^oe72))&%PU)s!Y(b%RYlg^Q7_Y!J7?c0m2g>C~eJibEJt3bJ#$vnvCS>@wYBvxU8 zXzE@!cSZY={+4Mr)xRU{6*_I)VO|f*>%{ut3pJT+^^)2Q$}hu$wpboJd2kQ==Z)U_ z74v>aav(CNGp@$ksxm-IA`PActtyd7wRYy0RmW5 zqV5FvMCJ=69zLIhrENRj<$uI7dfZ%#ZSKeB{+Kt?e0t4(FP#Z0TrFxL0hLL@g+yo% zt#K9EU)GZ=d7uLIE*mq8-L#7J!7~p9`TQyFBss&Z8@Oxll=wJF&83_x!tYv|FYB$n z8k?Y9J3R4TQnFx!8(ix>bbCF;s`WbZ;jI=sxN=8CAa|hi1L3ToVNSEnYbPtZ^ncgF z8{Rf4HTaf;sc*#=_;D3lmbmMgbKX#z+aEi6D(h7B?Tk4p&0F^lwPh?JMOsiuhf9Bw zG#&2#=gp=%Zz#IGLtN@*RQ~lDZngK8(T9KHD+fUHr2^qwT09Te$uN2Riy$r(!F$LC0?ld zu25*tp5OAIn3D#5KAYk?X_Q{H=O_qUiwwhIjJOxP?8ItvZ)jWI@xVj4dIe;^!otfo zrOBozWUJPcr?9?av>91;vQGPU*`=h$9)e8t&H0|Ex&3#`*hBA`v4I0G8Mw+Z7SYCM7v$spuDeI&I+YBP zp6`%i$a69}&^A#RM6P)qBv%*uD#sjBZlmg0REoQA7R;nF|6NRt^1;~i9tOtH0*Ns# zX=|bM*Eg$BcD4?NRN+^ul~}djYBq97M!%~E&T##~Dn%>1{8ngtd;4iiwe`441sc>? z;?$VMm@G(!S?#~Rm$mDuNlKBl*~F_lzm%(E2VgOUz~OD;9z+XV{kEmZecTk3q%~}% z=gl@1``&jU(1Prm^`S({!WD*o@BM92WjT%~%)!HQ_z6-~WMAz0G7~30lk3f-J3Pl- z1aW?TKKwJvTY1d}W`OSJ&o$Rd&)AU+DWt~n6@+l_+H?I+)hez_BCipzBGu_X zkQCVQMH4xXZangfr#Bu?$h6W6jSAjzJ)OU5!G%kUr@HHn^4A4x-S`*!S- zAhA0N=sV`;s6v;19HJ6%q#k1GE7aKDbvRqiX%!yV8u9xW)%wO><+r5pO4u)f|f01sCzz7e+@1!l} zjq;{WP)ipy6Osg|nLv?8jmEVKtk0zpNk<_o7FuRV#(q#pMQhO@o^{=}A`}8=zEL6B zEptgHPTnACe4&V!v@fCe1?pRDoXL;dtmBkE_)UzTgIPIAs;a7n$K(ggr3&KlH)WdL zTdfhY=`sR>N>PZO$1>dRj-ce^xWj$bGY33OUcGN!C?)Y*pMR}nPM;8mg(Z{QxK(dT zYXqqMSaJsYf{z-Hz8=Vxj)IP0N+j6~5Ut*6ZW7h3C~%)7qb5jBxc)oehB*;iPH^Rq z^MzyO`2NCYUR5CpjL}r9`r*cHtCeyIJyOWbjB*9#RX8w4hH2lW88hEV5dj`#mXwT^ zI2AnTLc6=mZ05nss8GH$T*%4G%+3aV9dX4bNuzD_nI1cTV6AI)@u8&PtPtHRbQ#ET zDKU(Ut8M#?T`zISq`uvp)wu1P@V}OYy>x7ydY_FPQu>Ltd#*uepc1e#|BGHPEiVrc z%{!9ey442!DR7kc2-6_RB_^`0|5o(SVexkEBQBo=n$l*CK^CI|_=*y$uq02pM4LZ< zZzmsHxZRfXFO1JR|9EYLmfhfsxLGWA8e4FCs<3Ro{(=0p&HFi=+1l{?w79UxZ=INwv)hg8tIE3kI4}3-efg`!TL4GRy@DQFwmCJBVdjfm z*BvA9!-7_gQ_Kk4=&LM_V8#s@xtp=)>f4MfGjkgLFq;Z!O8VwFC9k^Fzp8QKv&!9X zlP`N%au=rD#8I7)$M`o*FK-*Hul!z|u3A3in&FoNBlj9OX%WM;!bgPOX9|!zo-DsD zVDG)(^=J}OK&mvEp+cnP2DUUlxYRU#3Gx`&82v+T_o*zYRi!@`M7OC4cc*LlUn{B+ zCgkM#PLMZ z@z#qp?keVT66yLb?v1EMfV@X;19rHqpAe_dZ=&>eeji-ifC`+T!4;iwAYP!Y{BhKW znS!v6_$P>WT_|i_xxd%)E@SOy1H}jYg$LNx>*)|9kZE?TZdxQCC*0+hmj<_}L$@TMUSBRV_5&{gWRQEkcXiNy`XsKsEb__I ziI+2S(C|Dc`Z2!~?4Q+e;2?eP*;(Mya=JfmWY@!Edaa3oBy1%LNs>E$Tye7y6*U!; zd>bnHMs(WYeP3Dg^9AwuP_?_erd`o$>h))g(WmQmTN+aqVjV1#eNXY~-$!bt7FHpF zP>68O{efl0HTH6>MEyMv`V!x_X^HsV&~S0FcS9tdQ-HUFkAwb>Rt*U(w80d8G3)~!UkoF zneB`3PDZlDXQAnWjhUJGtZj)_j|TCh%rp)tj9Q@NHaH1MR6plYbp+E3W8<|0RyMfx z?JF-EaAqJd=<4>HFMD)VHe3);W$B6OL50n!U^-_{Rh+Pau0ExGjyc)FhH_YXsadg+ zL;Xghm~GmMQEiOJ{qO77HDa`UWkdHgQ`^=NUU@ISNi74HOZ#599LD56eUDP3A^{a) z&y&QLv!xIl3kY}W3-||0QuPFIMiY-5Vm*KB6j|sg=Mwd9$3Y21|1+cNgAZ$oQTIq% zWp2qKN{Qir*Z@og)}>WFH)kEQ6V3|KUzx4jUYkOrs(taYw|1c+9QRWSTFOf!>WVr@ zpg>!Z`*u)J!sT{NE_krv@Q_sxF!;^?%{@u44oZM<=K@ml(vpU-W}@Q zp2GkzP$%wzd<7_CtIwK~LXW)XN4`1bqRWm)_@zW>qDT@m#z-A&Sb@S5)1&34sbg-t z$bhL)=JCl)Qd)>7YDzr`I$;W$5aGk{e16`tkGuFIfvmpo1#%0orvPL;JAta?AZqF5 zxsv%Fa&Sj6KjF~4sMr0nS>92^ZxQTV1SRNR6>y-^G-gr|SPZO0%lr__o+lt|mi?&w zFguiDj&Faf!4PIY-9l-+DTPK#4v{g4L~(0Ve(=ZS+9d)lgc-@%(T;!H7G>Jv$}bde zlTv@x6DVBqldEg@_Dow3QwB!b3G)lPiPF`pQmm1yhvyYD)4@lO^~}$?Hk9X9bBDu~ z5dUHI(KI+7(`UQtc6^D;ObBUhyzN6l?MYK z_2wElMAyF`jkkxvq2$PTG0i-@!8%K!k_!kBM?2p&yDrg2@q1*R=U~A&Gb3d}kfnnuJP=y!2clX56DUVsX0-iwgz_;py)^A9NNOuEX8zKmj*+W;Igl zHjfXPW}r^0p4aeKnDv~^8Rb1oCQHSPk1dAj1ju8StHrRGIKUc?OrWLLp95rPn3eym z6U7R{vky*_seAH9_c_D7{^(;l<1Qb}!ZqFMNoz@MY!5=VtkhN-w#c5-sA$v~UQ2aP zSUG|D45=N2%%rzu!R!8PQp+3{dOSF^51wx)W=MA6##m_iq*;&~m)bg!foEYErBJAV zcRuUdyXujEfr+663PQ6l{58fDn3USy!h%yFL_ZKm=FV-O5AnD9v*{Zv76#+W!Xlqo zy=2sZLKjkqJvnOvY!QF{SVrF+Kg(bK!$ICky$FN^Y_LZLa zx`8oB!|}|R&zPTtd@a>$(xN;-j`1N(_xzRQ?-Ye$ZU^B;Tm`C6jlp$)8H-nwp5&gV z-2Wo~Ab;ox4(%ehw5lcsHg#4=$;gCHxf~&@fq#SsX8MoNV6T3h34{jlE^IfTUF3Qs z^b)9k-uLfsT#7*1Q7nggH`YMQ3Y7}~T7bYXUw+sTH|}>9+P(`>bN;dS#80xY5r2+e zwvs{u0+-(Ut6@ub1O)Aj>f!$N6vqjEcohy0>13%c_?)a9d&ujOX|;vEneu=$_AaCV zV{Z?RtKArf-@iL9jFCyca^r9*R3JAXc3sd&7I6Hq2T|b$zLCR?T1p;}v=9W0U~Wd9 z)M!%hu?61Y@VH8oR4=5p#+CI04-Cc(7b#1}#JiBGdag7|+KMKQZlSk4tI8&t#fC96 zB0IW^i%Vs(PC8pGAEVo&v8Ih1frS=*c?#D(KPCu%cDGfd3()O2Y0aoL|C6ueD!W<$ zT**=hNIk#{;9bdz!%72Q;Win9vGBw*a#B=5&8W#n3sV9yF#okuPXv&ID&PN;T}j^I9ZF=g-0{z(L%|4nDN zeLhs@e0nbwgb#xMB$vjEJ?^ZSN0QeUiLr^eF&VqXPN*e>O&1$VSg;FhP|1rPB`uXr ze3^i@)Qz=z0StdeV4yBl&N>QPq;7|$A&jYshC}NKlWk7+WE%hF*y>@5LzNUT3UJhq zl&n8BFN;KU+sT1IOqB>+YV5Uw5*d($KC?`ry^&<>0TsSW1Vff^h zC%6lI)ggQjeZXkN*Z|-oKf$BbRum&p_vYrqO4%M`BUa0k$-Mjsr&)NiL7^Up;10wi z%6*@^zY?je`LlL^oa1xV+XlISDNLs(*4F;dZp1+lG*<7&_1qvI><6I^=-}W2`>k$p zUH9c>HwzIdB`RvOnCq3HB3c619#Vuc>9~r`i>2swBiqyC1plO%D8Uo9(4kH~^yc^joCS-GoM6RG{quT|eplD}%8KMHU#S@) zH`7w)_+--l`-BE9CwXQD1Nmz<{1Hzk)|=_|TTUzI=TF4h@f8p) zM186fko4SR+*!@G=gJ?n_^Q+(v_$RQ0lG-QFUGwSDOXC-(aQ^G%!MB9Hb|-=OMVzT zMvuBoa?Q85-Mj~7;Kl?>ewY=ztPG7PU{+B1-M7cH_V0Gfxw384gikm>5&js0OQ8fD zP*^PThmKUiN^6yT`)a-9*?{qd%QRd4zM7K?~7r2=?tXIt|U~D z8uFgEqbt+(m{Q7OZ~1~KJc<8lK;c zwj6f%%1oQhm5=H>|0%URQ;7T!Ef!N+_BD}mS9<-A5D9uy=eLl5XV%8@VKv!tXH#lC z4{i*J6eQ>h{&*XsdkMRS@mU0HcSPZf;H@71-1o^&OlbmIG+uUwi5;`f2xB_Q-~lraF-J?Q=>p? z&(aqUhpY56?eprCb#C3>z+X`K4vdcX$m~A)wm-jkTm^3y3Qz!bh^t`Cp|~N&rQ0G8 z^S)c(%<*LVR6IQYu1CBg1R&Ds#ScWP&!F(~;ijLz`2#!yzps)1Q1t6C^XHPQ5OS|0 zSgPCKaIv(#JtyGx|2N3Yjw{z;BelRBx_$AKiK}c)hY2IkiVIf+4Ch(`CfmcA0Wgl` zgb?>d#eNDdi;ia#v_i|CsJ^B8V1CWHOUKh1@TBBq!Fazo@!_ zBLQ#w^EP92y3*=_BC!*w2ae-=_i+7?->oErAsYW*cC!{3>+>Re{g_|YY!&i?k+_;NBpS~h zLGTX#DZt?}+~W-I-PdN(t=xm_%fA;UEbM4-cn{tGMN8t77sPjL{zpvaC56WoCOMmo z-aa4}u%-W*E_RL7UFWoUBuBgl*pj$UpfcKn3{Wj4CKNo{wT5HGBVC6%8X#qn=TNqr!GNAsH! z;U{Y1`$}|2y^akaTe=mX@xecrqW`{#k4_;JY)l1MkziF%_z4cs{3TMMyuBY9d7bi$ zFAyK9r1dd}Q*H5BWV9FyK|(PU<9;f!%Tq;zJVH@qed)BVw&GALrod8LAd zW{L;R#+c)GF(7XJKTu9s7~CuH2AQ=h?l&iNYK6>UQ_^X$!7^-+KT<&6#|y`twj1L< zb{p=8J?8A9^D7~qq0zm=1w+gKd|~|j?fq!BC_d|L*mmN+w+m56691I9qzw?Rb}=!y ztCI?vh1Y$4wOz7TibTUh-Jd+)>ixfj;uxfg|K!SJ8DLkv1YL)<1$*XIUthBk%f49dl7bqqBQEY{ z`o~p`kdRg8EzN2Vn{mFPH0}SL)8)+|_(Meh7Q zFOQCmU%B2a;p6^x9EAeXS*DSm&z?-=ui;UKH8NrV`cL{xCLRE8%6e0M#KUAdH~8O| z#9Wx`PHrJ4(nXT8Gmq&Lr(P%;!-4^6m0Lx-u~BZaJxAFB{)tIKhr9W4@zkJry$(A= zYy>13*<1Z~k`0*vyc!?X=pn(%?xRmUJ{~ujxnG>x$uwOp9j;ifdo3(`U46&?hUtDL zNybm6&dFw8Ay$Bgb8tRg_~C2Llu6Q=e{282S|DKoB28v3N?vhbm3xSQR(P^6p`x4F z&moBTpxUC*I9fHbe)=+NU)X~*XlWPuK}87UVa=6|KN`ET{Z48$GHZb$#*tbSMOI9# zOC2gemh@_JBAR4Sy7xj?wCXv7F7p_L?B4>=MztfkbFcXoMPI0j0r0L`{UzKEHu_c$ zPLuon8~a?tz@OPgunp#fpV;e5QDZ31ruuPXG651%kS!x$!U~=*JG6AZ1zKV5ut=Wh zqXk1D#%5Vdv2U_Ds8c7p--UsExbsVg!LX1n7XCNjv=%57Rih+*&`S@7tr<4?cWJQTfpg?`AO zy02t74vTZaY8?gv7=R4J@%hK%3fY95l#{7Lw~?jQFN4cY7g{XQOb$*Qbo8Ddoe&p~ z53uR7F~TS8VtDQ+h1sb-dUwpELT|UKwG;2#*%|!qtT;_aZR335VEvGN=ybvgU+ngg z^DwTPM}o{07PdE^#I`S2CE_Y9zlDBHoT`yJ_@1MT+Szx8)3SoQ=}#YsJmsws?&`xm zVru@4g%N$~U0<*svssVB|7a;#_oox;Sv+U?C%WbjIg~*;*Pi8{=`%t2Ehttd-;29@ zVs6j>Th3HM=YjfP0EFX%Hbq9Kz7_c!6%bKjTc{)*+ZN29% zN*7WRv6d|w0#W9X-vTK_WIZ&8UPmh};B0B_$ZY*2oj4fK9=yt8BaQT1kVVjVcJU~h zTUR?&3;&@ZGgGvBT?IC}mDrQhSd@&#`E=3JkzA|rgwU3_uR!r^=<(NX_u*e9%|-td zeS%0?Mg`>MwRR5iVJhS{6p�=4Z@6{zP9BhJ{M+SdQAl6j$i5?c-j)%YN3rvT?E- zsFD6@RwM-0UC`E({^TFk4*l|q(D3heo(>o)L88A~a8FNIB=Zdwow(ek{%fiuos;i-*qy{>h)D--8eQrs7#oaXSUEe|X)G?bAo(oNiL zRFcBPLEEN7gW2S>l^@>keE|gWL~l0Mgmys2PZp907-( z|Dy%)kE0ciE8nMDt-D<_Rq%vCgfx+p%UK8vHCCZKe|v~-7bWm#8$0wSQ~yQ+8i3X& z6DdzfoS(52@G*X4Ua4ynjZ`G1HDzNP6uLo-;lNY=d!R;Jm?xw8poXfzFI@d?xtHMC zU9|jn`B@mlcqnbMmBY!8AA;`>L;^J3s%~d9jE<3(;+IYvxE835yaykqyZ?Gy(1o9<>AT!0l*vSs)F zfYW$KK)e|g)+gf?{BRrQ(B%~sEI&@LDmy=00fd;gnNJC%a>-BZ=Ac$U&$B)}^`D+c zF%73x5EWXbF~2PEt`{Vky&7AZcV6rIl}6=MVP=4I#SY2VOEdBTH>PKQ*TaTHTH#y9 zin@|?Ga*NS#%qyoBwRLph91S?$vRU(xIc$VRN>Axc!w${Vc>SKzTt6S0kiF7oXwQY z%34@aY|74}J|lAJgs?63@O<$)EP4r=9jE^)YRL`&IfXY|J)TOy;P3g9euidZa;%ep zj4?j%c2BEO1$7*y7&`LWzx{FGPss|;q(whaQ``EPNknvV)O~VbDi=4lycN7)Gt^=6 zZuX3}S3YYR8aDJ<+?`h$MVgYEOK6b7frE#UTXYuCmf5XWyx1=kRwZhKR!I~emQ4w%1N+xd->IW zLjnL=L5UwKR)q?Qp)Vicv=C4e&@T^{&K(yj)d2E z$39Sn&eD6Q6ZUe@=y>NPv0AVvVdlXX52J|xiMFe6B(l*cQ84fV6d%ow(5(NQTm?!7 zn$@%RaA!S=77hC9tSZ?y?)=(@4vW2IiX8cmY2U|gDW5%V_YjY}X_Xc+7%Y}uAO)t} zHCAF!+KG%xGZGNT;+h`1GH@WO(07pl2-j|D4aNmfW>-*~-s%`E)`;Bq$~%8PFSW9H zz*{OBp4UUm;*|NoxNRR8_fl3E_CLfM0#SJ3JvqU(z56s0chyS4If8nILP*+Etne`C z_V#18F+K&}{mgXxb}U%!=g7Vmrz<5w5lx%7LR`6J0WpOmTW*|du@|gI{7n3xNMA{p ze7wWhh`uKZBNpnfDDM^|5UT$=GbAdr-Ms0Il_3hJHi0$}bd*m*Ow$*w>z5OddwHZu z)2rlhKgqlKWalz{*gas$F?aHidb{reQ7f)*7^JRN8K;(U6op*T{=NJrX&RsCt7-~b z=%349$U7J2!7ywg9AkPg-a2lw68=JYgq;c@AtBMsBZyBCo4wV^6a|?kgD@=q4vp${ zS6RP$ZJ^GvF-bTxVY^$6`7;$CH!>0nA@1Kx%${*nvdjAq9XuFy9K_RT^x^qj*4#dW zkbZg2!T*=`#ucMds$U!R+<0tIcM%ql<~|xhv4$F40Mwnp&!x}Wj&Lv?8x#)n=Fa4) zU<%Ae$aido{R$W(cJK0_eRhD(>RoZ3W1^W$pS}OUM(_V&BTe5Gz7K39ivXxBcMmKq zY~;^|QSZ2eF@SE5jycauj?=OJYLT(-?|(eS%SQ`Yv5bpuH^9L8@2>6JZzZrb)_D*X z73F%Oa38kKJHSnt6cGrD%$c=oyVib%ukXy8Fyr0Q{3v9DB*n$2+b>dC$wrM>{U*L7qV>7ic5%+D!0RG>2y^{9e2wu zC&)o!68^ayb*QkgyZ*|5+pjSP#fkv!mjhV zP={{$ zC}@>Q#+7@k@{!wbXn&QhUQ$$=c>CV3)Sl&{zmmvWZ>;KWSH01~jkXO3Ew9&Ia z*2xW|yCVDJ*SSLAe!<& zMh|;)^0ZN+BBqv0uLc5Y+OWTt_wE~_LF)Ma!vz*OlY7F3)^^3-{?%m5bAZAcp@kb_ z=pPT&^bpSjAden>HU(5E`bYf@mx)<4+Ca_8Yz-8=JlcJPMsD(2N)p{?V|F$E*Tl`% zo65n#m|NMR+a#rUJ9=@_G+Lmd9Leophm198)7m{E3hAE!qJXIuI^4x?i4!n9oId>6 zyOTGYfdj#6>Z5L9QAa-cdaK3V%Zuk?GBR{j3AY9&;rN#J%IFJ}rXq9plFMnc@PV`V zXbz17rhPJz&}JjX-wK}f3Ia`JW45F&HL{3In%hJ zu~aP#$CLBlKHoTSisbQl6po%boO_pE?dwtyt3#HA28}u(T=(K7G(&8WY7KSu;QX&E zF#qN9N3K9FU$B|thw?#f!4*MJO1y5g9qzsndgmCYS0eFNA|>qp1Ud_mm&O^BcJJqt z5z7b|c5R$o%74{)ee@1-eg7NyM1+cltJ26MAY84h7cc?4QhV6q$U^=$7c#lX4|LkN z`6UrmIY%lwx%+*zLoL4`Fz=pSkbnxS4C2eP2Q8SF>?(CpgUK<(9QI4gISqOXZR^Yq zi-t#&b{02R?2n^Jua|vG>b3Fd8?kNMoufG3bQ>K+g=aN2=eqxFgqU;nWUMCB#j7%> z?O;Nx%)L!O^?A9Sa=zZV5g)=p_6bwtl5s3_xu!xfUkEA(qauWelB4BLnD!Ay%P-~4 zf44B@r5@c+RrMiCEZDa`7#MWHHXRt+7L_=X7Y8_1ROGR~u9NcVwYj}N6uri~1#Vgg ze(!p>4X@eEOez7&Cb!7Kg z*;eKjnUOtC=E{FmyWVO(?BE~4H2TMiOwG?)8t7MPt8#Z)M3y0=_DAA_ETkDk(b9o` zQYOLf0i8r)y4S~dxtJhEs@?5@&m^kO8>AfM{HyrR5-Cs>{cr$&^Zf2aWWgLbga?$k z?}(A`>WJVALSgujbEX9TzKU=n?ymc0A(mjKdh}513NTVo9X)Lj1koWArtaUzxltT``gw4GlWYFd-h_iu zpd}}-{Z`TUnq(}F2<6sX3`2^w7r3SVuS6rzFMv_0A2gzPBh7rOHCrCMZXCD-G@1Pe z;@H^Qd`_Ti~k46e@>Bt5~&6_@4?n`WEd>`SSq{U$v`PA*H}08=ZniOG zm8FJ1ATOKw&~KcqDw3&p=?j1t{L*Q478yrY=LH>~p@UNZY90obH_Ckq+jmF)Q3fZi z`FXugj?Qb1VXOi)RI8qz@6s)d%qz0mHz019k*#19wWKNIU8 zgd|KTq$Vj($k?u-y_tgwZp&dyqO&wQ0t*uz%dj%cdn#fJK_BkcI9C}R8}b7Qqlo}H zCnK34@45vQlx*cMW?F)DVooa85{A8bDYO3(T^QL2auFJV$eU$2^-RPND>Vp>mAz2H z`xjTQ=Pr<5H#7M}ybO*$(r`e6@$Ex`@qk^pTk=6_14M)R&o5LyUeElKu@1h4 zaS8WoO(9i9pp<#{m9_3d7Fl{3t3$M+yTM}C?t2oJ87ciCyIegB1aMn6s(VqgP{thU z+g4_lh)aLzFn_@y+TdPV=B$XGK9P%SVL=2+My527CG$srDDs)YBzq<&Rvkl75brhJ zs0q;b=?<~ZD^IF&9(AwzMbp!oF(ehy;tOh+SP37}=pJ>YdM zSl3&g=yYLkwjUN@=8etN1Z-SD!#~)94$n1x#4Jwi^p6oGVPL8k{o|T&x;FhlW-&bw zW1{W1JjLBGhF2eG=xUgkC}7VXXy6UF8q9@Ruf^kE8O6**W5aoO+j>?JMZcif0t40< zYFcBG6K;=~!Ug4kD}+P|L=q!V6$~*V5LwVzp@B)LL5)@mTj5`+ck}y4b5{V8UNRCA zg$9*}E?hbSvEwPb$shQ;t(-SrB&b%G!xuo2O=;)Z&3vWP;7>=>vPS+m-dHS!jHatOY563wJM89NILIa z%}ZKl*9%>7E>3{G8DuC5i@j$`H0-K_+%HDa#U$P23%vWK{v#B6qROKw4X-f#M?uJr z??g0+1RZE;nURJ7#&(r6rT^XqQ{bM{<+@mLBRp~l-|I}f2U2M(4b{EH4y$N8-M8=%h|NIGvfO%h{y482WZ|p$DFXB`H$Vs zW%@`*JC)MzKSWTskq~>vKaEY8aUgMY@ur^QPcC!e)&q@A!z7f4zr!#LL8PbS{|Y|TSNcSz!!-Ss=93d<`{12pEpLWPlL2hy4}bbSlG z75udf9*=vrotD)SS8o4@A8yj_ltOyme(?g5ZMm#rdR92WIIL=QZG=-~!vAPxBf2UwNd@GjmW@UP8cNn?fN zu{_6nk8p;WnZv$>1(S1CDay(Q{3$rMqjK{=-ovmto^FhlRc60{NJk-wss$Gm>twjM zUWxLwYSCjLR)8Uw0hHk0IRUUsKcsD&R?f`-5ahAxkZoUgz%WY>Q4;QQ4aVp{oLz_M za_D5?!I7Z%!0jWqc-%!$bN;fLymiveR2#6!25J8NrGj3wWm*QshT}RFSILLb&aG3? z8=|jPYS~Dx(k<4p5^-1~Z}jinePj-*OAgM~SKN8`PeZreSlG6~*P7X?4W6zno9YWUVK>z#_186LM8pBUl*kXZ}8BtC4 z-Nma9ifPGkByT4SAdUvMo$|lU`nz<%i-M7pnTJZg@YsvVp4}YIotrwAW;ZqV;fECtTeY3E3RM<u2&=-^?i@ zi}JCjkz3`TsB!TPS`sJ%t+z4W*YLY}v`Vy(U`Vcm|Z+0uwJHPkymY>}`pZI4wKnzPn3C z;~41gE$8K{E>wx|SslOPfAb|8z=;xmXlidFaG%FXz}syZ!@j?3QwVCOu2yB9-A#Os zgL`T=S7XPitQw#}46O}Hh@eJHQUM=5cXzuNf>l=IPez`bb@-*!{<#79BWULS7c{+t zj~+iRtDdr7=0T!?WCJ&ZZyROE-@vz9g`9u&@PsbqS2t%)x++WS`r9K@1or1{R1T`f zcnR4^Y0YM|s`@~;+!#v0(C+s)@7*}e`6Hi17JgWAGM-T6no}hc;&Ic&Re2bZ@(qWf zb!(5?*QdYnv{ijG%Xi?4(?H+3nUgRmQ8XRu`UDSF1#>SfIqcQ8Hsyj{``p};tJ|=#u80Di-`9bu74_gW-o19;)My|AyVCxw zOS5wuy@lYnh)M;vXRMmYvA>(s;c45J6K|cp%=a2{O=N0Bg*lGAK4X8mezP%2-Nns! z)mWA^!!_n>wK(ThWdTm&x!q+emFt^->G6qZ!P>i6ApiB0&RJ2j`d>YWC!T*~eGM8u z8Uzf4|0@(YXdmT%>|&>i->U&lPt;g(RY2a4kNoe0(Kl!8e zLBW}G4N5vW*J+xiP##*6?%K#W0O!X$vfD_0aRCG38w?ws!) z!xSow27}+Nm+ODZ|1Htnq!-?3ItE61${QvFf)qWSPf#LI$f7KmD!emG)qxAma zh>G5vCWVH7;@@a_CfJkPZC$@59B`^eyNO2)%U`ku?kbt@TlQ(T5Qu1uQJlMNLvWOQ zP1vVS994?@i7^)^?bljgjs1gwIKzFrw=m%oDh6$rw+DZQJ&UIVhv2u=$kff~=*{Jo z!F$)$2DgQ|SqS*|Co81Rjn))oJ*Caa+~hz(alp=lT0W@g14QXi#Sg331>Z>#k(-7~ zxO*q0HqwxEb@llb?XT1gn}e#>sB<;i^m#Z8JHLH7s-)(Ngo9j34~RYy|||8pgn$+@S;5zdWYdE}@t(hV5LRaO2U}Sd;uC2R?xGYf zL_SgQjl6MVvD&&Pz3~){kTCM|*Wb0IR*gEZFPjy1m+gjY9DM?&^NZ|D37|wsQ$o}~ z+GSyra{pIdZyi-t7rhG$(jnc_orjR_?vw`U?(XjH?v!qj?ru;(=~hA-B!zDue1G@e zamW4mZ;x@JLJqGv4mrIJ0}@C{CmA}b_=v$ZpW66Q z0|^o$I~X1w9;HTmVl#a%LKbBapQc_Ux?G}v<7OVeGUp*YO>$}(m*p(3-!VUp35YkY zOk;m|al>tJ0(t?H+>`LHZ#L7R;T_Q91O4}rfI|JWteVgd$xJ>blge-XLL)d(d)|&6 zQA2NcLnn-thK38fy9pg-@M_z*Q1EjJtp!&icXk>Qq$qF`q2f0=52YO;V67hQDHU&i zBW^!^+jjdmQCp%- zt5Yz2yXF5$E!Z=8*I@>gw$|eYN(C!%OfhnxNETh$aC$)W_#HVfbvom1VGoYqxS~Bc zL4auh^qnOFCtV>HO#LW;^*snLllH>nl2v(5NdNV_G7NMEI=jY1_C_Sb-aqitYw=3edsL=QzsuWD0t7I%E?JiN(y16 zMxf5G6GBU_a6f6mGo*R>8LpSmB51x~^k|ipdo%D;ran-oX39ODRahvQcYL`X~4Ux6KFz=3`g4q+aw1PBh{N^GEZPe7!Qu(X6H(*J-Aptg3*{jkDPs7b5NR3=IxpUFa+4;ji*n+u9Ums_M8%+Ga0dHpp z(MIDU1%?)V$^j+G$;1iy7<)U6$&SiowOMy((D?9H6(&J;%z zVc2l107Aco+RXVmrn~j@B21OvV(QJso9!!)ySu2XM59&@!mvQ%Ky&Mri^bXAg8F(? zQ&ZTBOXF`2yUi;FVY6vac!c#l9!ft=g|d=RReAG>tkyolz;7O5S7u1}xB znCYB0b2-8?7I&%%8;(!Lh){ggCCZRXw?VoTgGT#lzy<(pu)Xg&4Te!{tJ787f>3R} zcLo|J;IYmhaja>gIF=bTtKt)k<)VEQ$=H0G|-fW4B13NvDa|=i9-%`7v`AXem-p4=1iw*s{YfRu6 zd%PQDV!wOWq_ami&bliJ_xDf4K_pY5-;zyB5l~C9rPWELgy!tI%r@Vv#F%sALM0$K z?)3&{6qsXjr)i?OkTZ|)ub$XjNP5JJ*@oJV2cX2F74hzq{4tJHISz)}JsfQDhS2c@ zp3X&OC=hOf{uLF4OTmz^a=#?G5Lg^9oxoTE&c^$(dbi)?jQ57ac9#2HKW4&<$b-#pQ=hVtB@XnYE^TZe2Us#Uxi-*>Ja!-O!G`DtW> z7TtTl2OM>n@x44V+}z5adl9!f#l|R2Efrk!nWfRc`V)T_Om%gbxCL4YI*2 zK{k=>l00wXjbgubXVj>uEbpo$DrLV>iV_Plt>lG0)O$k3iCg%@%i^>r^`5Jq81XDG zV%Ysdl-t)U9eWaAA|XO-C|e(~D_bNib{at+gh0QzMPchN;@i3G++5kY>z^ftevmqz zhOAe8PuM>SOy*X&iI{2C^-a5uaLN5v?s;-dRye&ktHJr@bK=H)$CQE3`LF^h%gmW? zodAN5GgTkd11^Mu(RBm#u0!SApNgbJ)IVKFfB$Dx*k^{!iSQ(vfFD@6?}TPiJPo{EpvJLi z)cwR`0VOhn)eN`ru3*A!IDk2KGOen_TUqxLO5)->P{R+~N!732nvTCw$&8Ic%q=Fc zB0bCmP_dL~hkh6|7b@5Xlg**5v^kWeiVefYiQ3r(v`(-@I!%k9F}PukP(Sdr=+;=) zla0-yuoyz*b$Zl@E#{SA=wO8Qcr9 z;pBqA?GJ}Oxd8ZURL?H&)+eKI*wZ>fI|Z^E1n<*ajVcaB$)V$c6s zxFF#VT=AkG+Sr&I32CiLSN1yiFofJP=fS;9!GvzS@yQ>%+V}q42GYd!ew+8K*{YpR zZ5);GN5@~P={OgV4E;^P5J5|v)Vd8J>3TG~YbsEzAVrVds>0qqd>qJP{5b0`;afad zcy0aZTWJl&YW(Pc<7B>jb1m9Mw!mz;fK|K917CesVFLG`o5X!9DGOYxckm8beTQS; zWP*k#TT_Iql@MR14JH@j=60O{xfwwAVr)^s2qFUlWe#K_6Uru_L(Jo_#KexPajP2M z^O0TT{E6%+6`}OvTDlR0_SUH2kBW=(9zW;Qc#g=z;qlhVkjhPD4bMVWX~enucB<5< zyg}?ZQtlFtVSlaf31d~Igq||32^rb~tEF@FxQ043wtrrj;b8dgT%l;2dE^PKMEy-`lvv8R0B`v88vmgx9IrbZjYsenEHCYEil#AG9iY=)VJ9^%Qzf z8tZPb2D;J-2oetw@gMRb*A~ZBKaHV@= z`}{@CuVj`R=eYa6swRWGNZ5APK+FGo_r{|jyyp|w%sQieoRZBF@1DlI6 zsV2k6m*&;1HmRnOr}?$}&Y=#HmyI=a51N|(Q{l)jW(dIWwW<50k^Fcvzykdw6)-V9 zj%|OKMA>Hkb3cQ(z}R;IbcP@y+=6UXfmbJA;}j9I_NJ?A0T-8WB~4e#>OEHkRlhz2cb5v;33xl5vfgR*z>Ke}f_2PqyABr`Bn4>8* zb@g@G)23p@aHrc_*gLJttOD-sz>_wVmP&=Bmi${xG9g;0P1c+2!nfxar}>E~IWccx z-x+MLW1Jhvh&P#9ed?B<>rs*n>7%AA5$#~KMVzfn@EAlZU(DiQ)R3eY5vn=LhF^Mk z;3>0{_FpX$&lL}2)@Q+v2c6ChwjQ}4srxiwAmT8hC#|h9Es^^8umVDp>!Ss%`8>EE z3XtIe4CF$(g1_N3;KZZNk)5S6<9hDaTW!*nuurE{QU^*luG%8z1P-C*)Wv;$K^i>FVkl6dfsY*{L@YE$N)#NQGf&Xh=iLG?cAK zVf^qzf;v2o=ohbGf?k*ysidtQ{BKuwg<-z&fy*sC__3R?_#SbfZU?Q5EFs71HA3ou zey{2=zEyS+v}kjPz8+niK4iQ+UJUmRQB+tMLgHQghz=swbO+9-{eo|K(C0t%W#$X& zMyTC+zKG*ZyIn7;b2`aQ0QKL>#g9f8gYx!7*ejMx0(|%l6Gd*s>geWv_f3ORGDNf# zU$kzEKAHGHz6!<^GH1vE4=aD{RWw`>4@R=%NW`g_@%qQBKlS~_RTim~ztH7Ly4y1^ zZ}0D~|Dt1A!I*vA`Q;o`dK7mIau2X+);2_sWZ@F%*hO^c$0|t|9!H8EM~c-&sAzK} zm+-=y{d^XtSu5o0%P$hl?s2vK1}UD&@i?zUyuiM`-|nr6Q{qR$m^D_$&l}z_hlhff zFr$nU-QLQ{`$xUTpg?;|&u9ZF@nM73ew)@{E2c5mp-=14MPtm>%!`H1weR%w^y+nx zJ+3Z7%+?W`hU4(Nu@dMDWh1OU-VUf4h4vB!whrwnaf^MY-cY5}texp%xGX{^{H)&k z;Ki@%1nk82CQCfL2Bs{nO5UaknbgDAncWJXLF6*X6{PEXbjJtSUq-+&6j$Un54}J# zJYbMp91sta3^yX1et)^9h_!zfq+i6Zla4Wb-5rYDRbW)hwv)@kUA$3;y0=Ed+JVg+ zQugmZ0ged}LBHa2Ap2esyM2#O0@`H8NJkO-&u z>(I2CMe2MdtS(#j=GSZolH%Wrj!;T#^Rsmqew|7;tnm$k@Qp*`!_{2vS~m{5M!COq zJW$7e>#^H_^E=-by?ZQ@zPpMUp(C|2EZPelrwd{t9WY%-)Y!3V1h$;qDQR+4q`>a= zMIROyx7Dtt(nnu3_se&Rrc+YUgVqN%n!72Kk2~EY$-HQoR7dz5YL`DeIS$B+k)baWFl1oCsZhtTy@Wu2OTQ0ZS zayg7MK~uF0Q%O3Hnd-LX z!=A0MT3v1L$+7ACs|gWK6gY}2w<2B$A3g&QIQ-Spk>?DY&@`@D04*|X*< zMZEmcS24u{LR;G%(O?0KaE(gH^q?eA=tb6lxzx${A>8Y?WT;kdngwrX<~ik(L8vB! zxREMzGroPR@lh=zvIHBeLVjqxNX#Y=XO_Kq)L;3u%FXE>v_fp-Xy$4+-b#5hU38rF z&!tx8#?;+0P4}S|7R-H;r1oD-7*puZ5At@$m}o+Jdj%`2=<0V$x2MypbKB3@0k4hc zL*#0!lU7BDoWk%?f0_rrrdM!cauSUgBLpRXp5s_gDO<(021|w5{thK7SasPKGRvf0 zyXzMB=|jL?&}E1yw{QlJzk6p|l{65{Rh#X?*OUc5xe7!gCL?TYm8$KiW1~{ooDgv=TT=9{Fu5X@yBo%kbCVF6$pi0P# z)<^d}6b(GL+IB39B=4V7j_DqrIpWD7vm8by2?GNXI{Jz8?MZ3CAyeS$s9A@~GX%d- zHhe1b-bT3p!k|I?sDa9=z|m*-m3J}XTnvcwm3dQ)0X-XUVr3vROHwxy)wiBFL1u;`kNNuE^=h(eP17*li($f!^MsA6u83>UIQ!`-h0R3>G7Y$N zv^Qg%b}nh(f1E#mo|YowMt{6L8!hst+UZZZe0OM?P| zC9CGAwDi66J=XsZ2HHb3R%*doE?vrg3P^+;NZ}~N zBeCCO2MAE`vs^*=F&qm=wn{J${q{nttp|E-jgYolwLOn&6zcw&(GyWlW#bx+x-C%@ zxZKQ3sXDHc+(B$AhVT?*yj@ta1G(3{%UJ>D*1`#QPJXGW^yM96p(Z7$EoK(`) z+*(jsG-w#0N;NRBQEhE>Gd+LsdOL%a-eUHTSp(Khx1osCd2-$btfA2Hn z)&JT}@*OR5MW}Q7sgW;WrBuv*SfA<7^CoFa+cR#CFGu&Mr$l*7#Q44n& zy*!RkO-j2iH(y2&)!RjN;1BgmDk->9vV(y+S4^y*yESDJMh_VyVw8t^3k%BzXwroQ zsPJ_{g7KMDTD56}0->A z+@T)dCBvq-t{KvTXmoLP$Yb+E11Q@*G4m`Tg8a1L^i!cwK4I*ou)(9eIP*H(xe!@= zqHUjo1t)z0@E$NgKI}2VqaU-3Xz#v=6K~g$m}a(j40#R{(iQn8%IMSYrvKw_fv>~1Aj|uiT!%iV>p$t zhCM3Tvl`Qg`)E9wVc#1Qv%LPN)g%BHgwFANE%BZ=!0zY$fGVI&+P%c{6?>!6SPOMg zU3hn2GuH8#O|N`O7VRg!n-$tR29V2j;Dqj{CPYFk+NV_@syJVSZws{f1mJUaxx!cz zM~M3*h}_BNT)0tv#U5^*8!Hey1~V=_`^-P5du63~oNmO4JubM!0DF7D0uupM`#;B7 zA*kkX;1jTpooD&OuWbbl=BLowcxWbTEa%Lm?HdQ)(H4n5b(VHz_XM5tCPL?8u*}+s z!kzkfgT%DoabKqk@^Lr*xS_@lpS4x9KnSw>W;=a{tWSV5^ z|062NY`gLyhs#mq?shO7WptWzbIK@yzg?=^2Za8h+v~^wj*y2!Ok^orr`2vag&zH4 z%IAa5XM8!1g{9>Jxa(jJrY;@EkG#<#VgiV6#6i9BWBpF-t#aY>ttS`^8sGn+0_@ge zF)ILeE2j^+%Ch6O)a_%Y?po+EBG55ra7(QEyfl?ktz9X<>+#_t%0HPrhFIF%ryRoN)jHq0^uwEsdjW`ytP0C2v)NOuaCooN zrNsB15;&f{V@rWgOrI(tF)=VD1;`ThC5-;;Z9*GJ-wrUS!*$@u2n^_CMvCwsO)`#% zuK7P1G+#Q94Dz|#axN9;CHvIzgY6z?QKCQa+a?sXQzusA0Gq?UE{R_?_T{CGsG;I1DVw)k4t!kU_u4bAmjhV zf%G{JZXtX@ykRX8U9AhUuwB!SHxs685_St*5xmLR{BwrhuX1xbKgc3#b75x!G=6sBE6|LmYfc1C1K+R9HD-(HBGoe#v)^1Fe zS$%|(R}H|4q^D)}?&6>gj065$0biakOpC1<6x<01;xbUwC`YN|y?;iOpYA@w3w-j0 z_VFUu?r+s|i*7*oW;*l4<8RP6o zYdjU)%gZT>GioL?)aIE$WN0*Y!>M>3U#QQ=SDktU16Tpxo}^b>Jcg121y{1NzWY78 zqcxc0_t%9|>g!}dB~nC51R{!9z?Z)!1NXZ>Q&Y(6+TLq}Mp>O3Ro7iB@r|0`t&<5k zK{wclB&i)Hz;0IBELQi_Z4^S`?5%p=t0RFkjPeNu;O#Rp*5(F(~8#^pu-IY!;q`J=L^-gl3$b0JYfKeKd@wt z;5{$DB>4Ve&@gIy`-iMOEGcGuT$*O%D5I;YrnSFzp3I>BQ4PM<=wWN{+mFsVNZAd1 zXi(hJHGzc54Ls zXLgBffRCrZ_F-*(Lz#M`*;WH1=bHkg1}Dl+j^&gbv<5rk;>UQlSi&0z6& zSmUcg{C*X+W5)iR$-ii*@1x8)@e*`2soJ0#PD85{QU0Ocb3TA=I`3lNj(FuV?Jx>@ z?9e}V{(W%F5Nw_TN*ImA)tt+y=mnyx5&GF)c+}1a%2jp2+S_+(U&d9~2XsO;$Ou>Y zj^xbBec2|RU@_M5fto*dT=^}Weu9%+vMCWJ+B z;ivsuKqI18{(bOjIEsz?Q(T^sPMM^coq&rB^w6(E!#S>!$cxQy+y#5+#DBBj*rvU( zPU3tU&9jCG;<(yZ!-hgq3=#R>J&d5( zB5zQJ$$1JI20~Vr)rsKy$~J#v`w>()#iD?%9pE@u0ehcs{T^TZ8j8743j}-~CLbyn zRG)5U;M=&r%FC+rhKPj?!vI#p&G=Gl&AhW!(FBlJD97X%2NUE2F#hYYA5pC=D?$xh zR_D=V7oqiS#fv{i|9SIWispM zE^e;&4Q2b!{T8C#@^NzwqMa^IhpW-bTBZZ?oE%Z>NiY&VT`(;38wDXFh_kVM&Bp^5 z_Z{!6^|E6Z=|O|vW{E;H8PF@)5ByhoSDJKloo;D=*tm6Z`_qJZ>L>KwPdmAa8O3~b zrzqsFDS=dB*`mbRT?Qeb5|s3P!XVI5l1jNtb8oD_sJqbYZi1AMpl9)v!L9u=6x zL9cx2VuL)M9p28jb~iZf@*J=)QeW*@lJvgX7krg55TZ!IAxaA|F67n8mO_=M! zn3-=cat9M~px185(Y$bIl48py;$i_M$j*C}M%5NAIi+#JD&|v7>)?r1oaEi29PLVV zd^xyxmy-4V#?a#4qj^t8!hLL-sOLEWT!Nz$@0@&byKJ!XGF@oRsM({aKAZpAw$FCo zN`JJsKf`8v@zgTKLWr6u`1o8)J?C<9iBAysJv$*S?dPS3&(5%XKqX7<`aO@baS!74Bh;@9vQ&%7;U%c1b;bH<_2vpSXNQmLb)6 zDB$3yXY$~D#hTF%8|*t8|L@&2RV`az+?&ofdxzj_DC+DO2BuiFb@>-yDHNW@s6ERU zbhb)Sckie)fyj7?) z#mLs(CMR>PTpkpkAh!!7sPrW$8N z-z13>2rEHLW}U5*Aeiu`3ZQoiw%^HhjwIy4oC>uJ7J}Sm z(geGEBmHw;c-m7dHVws%Gja6_KWgxi)Sq@+$bYo0Mov9_a zvbJo(x2^E2m1r=hd#M4m-<66^Qxca-ViGO$jsnfk>FK6}WC(^%J0@MICwfcd-{0N1i~*7b(bho?QH{ks}05*K!EvZC!Jgb#EsB#dOCllb~F0Kh4zgN=O`ub*N>+Bu79Y)01(1{3PXH~(yAHlZf_5&cyBj4 zLz?t+#mil3dAYn;$sP^CPE6P1jv*+M-06poOc=-4 z;od?2mf%|HO@|?ak{i}mh>Z^#{gP-6aN-SB+AX>#W1{DS4cb0WAGuY|{&w^4JtlGS zz0AK`%Sa-lu)JSChEohVc+Lp@Q=Q%cE&f^LNBUC+cK${=^xgEVd zem$1|UOeM=*i0CQT>G&T18TW}s<##UrTx%K_os-;zKI)?)SMEd^V1REqY(B_kcZG5 z>2@$Y7rD>_QU!5$^jX@E_sB+{@iJt&8Xh#6v_ZY9_7dVd%@{ONdfiq%qDW@dR+5pSo`|S z66P5_LA1k5iqIY@3_xB9{UTZD(8BT53 z_OO4zT)RB{j*I_$bIs1_xf|QJiO`XUnC}BHM24Ehp!QddQFi%|tWot-!!Ht6R#qNf zSbA8{BVQ&w&$Dd-eB> zmOH6KqGGgKUF+IR)y#u z5i6RVeeZ1Lzl>N6Y&;ni;v3s|M9k^2x-46Dak=u@;pc2!tH=aMtu&i!o<6gqhZZ+{Rd1d0RPR?0@sKb!Y#eWb`eIdRK*Ukz@H)`T|i5wFuPZb z;VkygpG0)tx5l-J#Qk%dx<0R@WDV_X1X%aCupz!W6~qdU1pd|Jv&LommU}YC^=+dr zbY_;=ANNCFMX6QGd`QC98>oY3Li|>Gg&rzbelui(h)xM)N9(qoOBu}clvb+>ZJJy3 z>i72skhQ1sTm=eT$~n6Eh?{nlZ|b`1Dp>_Z+w1f9?oKUiCOp%1dv7{@rq_( z{zlgY{1x+zw2H4^F~<#gU7C@ECqPF_)VqWOt}4Uo<`aa2`~;{qD^J^=oyvZtv*R)| zu=MCuF>52b>_#&1-LEV7@Nz;Y_7JWL0l3I&pH(VLRn)&zIZ!N6&@VUc`efD9c=7b( z0QCp7f{^VJX^e*bU??$Y)s{D+YQp>MCpxw2>Kr_AHmgqTDF~4T$;uy%2S(|0d;R%^ z^P5>@{(P`9=Hf-Sr^8~fkn zfEyYd#EBR*27lr;Hbf;ufyqd-baB0djcZj}HQ+a`Vqwmv+VG338Hf3@cj{QPP*-GA zaWMz|{}A?9t=<|u6nM~3qWgG1FbL$cBfouGtwrM2Pz~xh(k@?CX=x=Ij=t;xX#b^y znuI%8Ax@Hx>Gl`zVapP~9QaU?ptAh;Q571Yf9U8dhsq}>LT5%jJAaJuCu&}Q^;4SE zvQDe|0P!HN^-u-kC_TeS!U2G2)#L={Yl`Xd9_%dEk{pD<&H~6c=StEWT*lGY*sh$W z21DcHPr%Pp8mPBf`1ktAZ^QAR>C z&N&9l?U@7KOXp}+o+g*qTYTdXo=Wz<@-}9F{KJ2^PL?=}qK_XH8H}hc_j%lj-C~bq zjD4dH^4l%4&t<_)h#9U8wdb?XU zskmAm!eA`@-$Mi9(VDkK)Hn%e!>?gL6bw_sv7<#z|62|^|FXJ5^QI=K3q_t1C(4Z% z7y6$w+0-_B_JpXhc<9F2q}nHL3%Jv$(nAsOh+z`z4=^>YKfRuPX#*jmq4iWoFYgWo z2}hhk-7zUCn2KW+$x>YfBcp+c~hQ4Rr6A36@2lXHw>v>!^Iy=02YCXz6=@`A? z*?%i@%?O!NEhQ_95u{$Vn8D*(S&t{JpfJ*uPHC9Z(q9S>uRtk*p-M+-G%#3@z?Z18JV>HxRUM>`=Li7V z&e*Z9{k4}yFb`TbmZ%3GevdU#_V)fl6Ibt{Uctlt;MQa^jj_C{3Zu3(gye7D`Kylw zGZu`1*WLQ{U%8$~ek)DKu0IErm_jG#*s$3x*ee?P#taeisTmIWI$ZUu?@|?Eu8B@s zWxDSr`B zs&CPX7#U;W|0#U*;0O^RYEnsA3tB&P&G2BKouj_gN(19;bGOB`U0cgIl#Bw%?jrQU zRg-l>vT`74Ox?=W&?9)$dQo?Je<2eZ!789us{pR@)ljIm-T{WwCK_A!Usj6^JUqec zhknn^h?^^mwy5MlehU?1i4z`K@LMl=&>+BBc`Ru)n^kz7tbl~^Nf~~QgM>BEEWG^x z_z8Tqom{Mq8eZlCIu;#yaG3G7cGtf+nCmzu5RK^T%l*17|DB zW!OgM`;Oy#dM8CbrN6(4R5KGA-021Uh0mC;R=fy)<1<3Sw4OeHBW#npExJ@?l1p8j zD<4*xSf}ZJlc4i?xOj4kD_es;!maUC+`Sq*e*D$w1i?n|+X$$ad?kGd6+!M#2%j#E@@Y_>0n&b;?FF*Pb{S)hZBz0Tm^LD$lB5oLubN zjs%F*j@>235sLNb73X1~S5}5LY-F-~Ph71V{jBuf_%NIos#DdD^zcvVF2O5qdw>R3 z<2u^(r}S%5;Fb2q_S$kV320>H^P4u2vmf zn?6NFGH@P#^EqZgjW~FX0$_*Ng#&W@iS({f6>3o&aC`bKf`z~SO{;nsP*Kg}hHW2W zYL06w_7?81la3!C2YuchA@~?lLe;A8I*Ku9{Q3e9)Zq7-b^WEq22N7ELf$OXsIU%h zD8+|MqBt%G-3)AvCAG|$1d7l~Y8Lpn9+;-6sTUTMBk`0LXZ*qshRUA(*;Hy3&&U4v zkt&5En`IowKhJRnLd>%TTHs>-{2lUdCn-Q#Tseq2x{2^X-x)uGki_bh{uaQYR)xCf zC;NTsQRO3fB^Nh=eo2X5e<)mVub*7OBfJtZpRENI5@Cp-By4+4x?#O$A!qjXaj~$b zl0o{Rsb;nM``M|$RxzYy=={9nAr+v49~grq+?4{XQZ7_^6fHM*1;EVDv51nm6)o>5 z=mIa2nu=m<3B9mkRE~Mt5|?l~EL&kz^5P@m@m-oY{67ZiRj|pp>%ys{ueu8^67Ka0 zneNM`GxY!cRy+I_KT#(IN>)7@OClS&pNCN-m{9hNmxo!aQe9nbP?E{H?K)NE?Oq~_ z$ZsF!z&sM62edyA7#_RN=%csgO9-A0-!*I1&G(BrdU5Hvw`wpu*Lf~4skb#-PDy@F zcgoK7Y%L|`dC1%my}H|HSpY=+bwBa^`Oo{33h8HA7AHFz2c^oMegyrdkMopnqj-^hxZ50tlj-a_AsQlrYr_ zhhyv;Q>=16*LNzN&;nL06h^n`Q3U?6L&bGOeGw&zB1!S|scYKrdR`NuJ}4e3;AIG* zM#^6GB}3>tDgfzZ%z59p=M~zgy7z_) zb4d6e-0&)`{`IBtG$Z|MYXpjHNdO1J1D^o;$3X?opn+cnU9Q)NFE8rSeKjfdn)PVP z%)<9W1QN2-cv32Z8k_Ug_8G-R1G3DMvpWnJ1#k-YWWl#d2hb60co{)`j<=<~v}}R^ zlb&rB?J{W8Q5T*I*}3Jfjk{L z2Xv$k9E{a!?&^Y`Ho~XPXnw1kmLCSKWdb@q*!^VhISG@`E&zW56 zt|}lus*#-y{%<7+0N2(Z|35`;BnY6WQP&Bi6ZLyxRcl{ND7$0ui}A=Jaaj!e6&STv z0U)GjJb2-S@%8IhzA$9iuY&L;B_#%8L0HjeWA1O}()Q`JKBp1RhW#)LQzv)Sxea3Y zc;@+lT4cN{7JEJ;7ciUzuCk`XDQ)tn)`BwJ7=PYP0Enub zO~;^K6RI1jR5uLZO~%9n(p8TFcE_C;rEr}q9P|Y;0;o|7%vm1y-c@^4eu982EWW_g^xgfE~$9@vpev z05X>f=>Ka@d;sVT(54spXW1CLSZOajm?|s|-hzY((#`_NV3>7kpl=IU^Wk*RkpLtB zv2@hq2G0-B!wE8{+;FGe5z7ZTnw^AmgQg4<|ge?;(c+z%ElU(17z?NWE1}> zBr}8}xQeN$PZ}5hPkQg+lsx%uJ5)4khfXwNj#KntkoBn3b~@w*$y^sl84Si|vq#Z^ ziHX0a@=(osFs-{ll)e4>)NnmWC?b+@qrWCGj`JGBGK4^=K;!@k{nGjG8gNR#U{(T3 z?H?iH_1Tue#T8Y?6mNJYBp={Cs7TuWK&9}u=(tG%UseJ=6gn zHEiPlpd94KeZ_%>--5jL4%=j;?W1WGzNVqv3jc0p5e=yN-G51CU^L*qsVsKW{wD+# zm!j^_Mk2IUuLmGoTIy>1D+@s2+?JGw9(~SMIsYrU%gonNGHk;6j2|hf&mVv$O&)rL zxYXU&mJgjr2!8v5UU1`|zm8)b==CxmtzepnlFfi+w*yTyboslst>#tlS$kJcK0hMP zs!R4t+0U6QxSACvxwEP>Hbb28Q1fh85Yrc|U-z$;nehg=AB-UEKk?3i;7UqMNy*7Y zGpxnLpgt?)PUx3E4o~Q>C6`1M1B3n~Adq4PO-m-=0Cm@re=h&$)_cK5=GXni=lMUT z@$Y`GPTm007tFyw%xF7;o3Z|T?0-uE_6`s1;MD4P|JV3G2mPAW{O=zg@PboO_oXQE zSN!*X|NmSam^9P}2`c9OKkl6&vuw83#c}a;$@U)pM{JVF5rlh#({_kJ@yM2K^1`Q2O zfE?9hd<2aWdzeDm$BM-xKjcvAS#a?Cr;A_#{Lh64cHq&G)xyHU2QhJRPk8B=iHV7W zm6erUr*_@_<7329l|wBw=MVo+A!Z2mk{K}LmWM(C=bZ@`&m(<3bm103FFvH9rM;gs zU|uui$krk$*5}9P)A~Oi`M;%^Ck~vC!A_Gpp%@etbZQs%`{nJq979sf0NmR*z@N0Z Lf>^DHLD2sPg=7|Q diff --git a/layouts/community/ergodox/algernon/images/base-layer.png b/layouts/community/ergodox/algernon/images/base-layer.png deleted file mode 100644 index 2ca7a273bed32e630522ed70618a930037537029..0000000000000000000000000000000000000000 GIT binary patch literal 0 HcmV?d00001 literal 106956 zcmaI8byQrzvn`z97G$u&g1Zjx1PN}z2|l>HyEC|i1b26WyGsZJNpK4goCFE3?~r%z zTEF{!>s|ih%y9aguI{SZwQDypRb`o1XvAnQUc7iECo84);spZa#fz6^C`iC3MtTAH zFJ4f*kdqSE@G?9yKy=fPA$;Wh>`aULdSJC!l|nXOm2^o09Z{Z9Z6!v*+L`eWLa9~V zX4o6a)1P=K2uiXN`g|RkPvc*Eq&!l*GyN;m1xicpJ=U^)d(!z_cYV38q7w_Hq@`cW zD=6G?Qd1Am?XE8dav^}>FkVKykPM>i#WqIa_|MBJTDXrNKbFtU&2C7D=PZ25X9J%l98F14)9|bcwpGZ{QqzNuhD{6P>M=QK;3Yh=`6E-efiNbF<+VE z2fZF{-GN_Y;<~y-24er8cfX7X>Z8CWCr=0q3)4_hQPF#6X7vR*TkU~A| zf4dbf`099lU}napAu6li$QK&wC6$aRtG=) zFM}k3?JzhHyeOQ0jp9`4)WZb_2MgPf7~+eGiH&Co;Qm^#`X4LIp^1<-X;C5a^$3b$ zM*aK(#9%l)1Ui+RSP|b#;Kp^Sa9Q(TcM!J0c?(d=eNE0A7z=Mf(x4<=dr=FI2M4j6+&ihF7ltY{sK!|>|nls zcvysC{2rKi{~wlk6N$o+s}yP6Py&YYkq$}%`}}z^*J(oirpCza=#F~qhhwtBv|<~n zbva{VQ86VK*Y~_wY?u_bp5DOlH$%DF7QRqtzY&7ME&@~4H(cibVNnk7^K>~3`tVFp ztjJzUL#@c5b3qX5Hz>hmeUx=|O<&EWZCpS{WOl0c1z3Yx&`{2I$!vY!OWBh?q*X|n zC05c(F7fd3Zw}?XFdO?1OB%ZYuRO8W9?Lk6&A<&8JIKK8cGOo8^gWD~+nm>!CWphwmb zK^7=dYdtXuDzE$W?ZP*k4tl>V%Wwrt-@BnDpCVi(1$njhk!h;p?$mKWW4P5HzEqlp zbt{A~sD&}Dc`$4_RHwhWh$wI1ye9iUvl19|#P0Rg5ld9Q2~K%hJtJPiK(g2( zE9hnQK|54ljGTXozyMk*`w9V`dk)Y4MYkx)e!TZUr0G!zVqJa1z>k;k9FB)tU6;v% zqM7B_3qFWhJPzl;90&F~rkpVLR@%5&SO>39BkSwbaWrO}xF?KKe*L1cTkOW;ZJt|b zbERhonI3KqF>GyxK9KO{IcM^gP1jKp{}Pza$6B^Vr`l&PPerVF5`6Iyv&}SMPjbD# zF+C|Q7CF!^yfT$_-Ux6>x41X=l^jRb%cT3Lr%ah1m0D!$uf>qjZAlC&OFmsTo3eiU zY1M6yH6X<;uF$ntawxt2wz%+kg<_7nB4!FB_KCCo+Q0CYdD>SwU=g3jHD^mSJXQp_ z?qgUTx+OaIZ39ew+G$)W1(^=-$%GCq0NLIoQmh_+j>BKg@<;R&wx3u{Zvgp9F-E|F z#?r45B(AACYzom#V2XZzyl+()WMe<6UY{~No{qdA8`%{oylP|jYcU7h#ig~ z-WE5#&+;G3H#)Ib52N^`^r#csz%Sj@z>qZ@r8NGgqrSyj65c#UZ)>Xay~el>Vnk3P z3U=-Uu!}`Smupg)oiC1bJH1cgx-}~(4jz2d(lfUzkGlt2BqLBz8{U7mdN$L-xTU&n zRNa_2wlNJ72`Gf(P5g<0U?90my6~sY!6JkYEbrh%*R~O?WvnRK2PAM_S)LzuU@?QU$8WG@-#MSyK)~+v}PW^6YOP}rM<{`we zd`FTq+uUXfWp5wD{pq5z1gn)Yf$@n~Tnkx>bVE&t+Qz#(1x0tq_W4(G;q&A(Q>GPX8ENx$GD7HC zM&jg>!?B3pS5N+XbNe@6^gKjdcKP%*_<1Y-Stk7Jc{JrqKkdh>eqK)m%fB+Q{DB5U zsj`kqrw{B=gD18Q3*swqp=r1O!UkYUt zTrJh1``{*qm=*2CGAtrp#5Q5vZ2HKblCec^CiG@qheGo4W5?S=W_e}>#y%V|MGbOT zkOyJGP7krfD1IGiYSb8Hl8h!CuZX7#x^p;fN@+Mwy>UE-n#f_8UOvyKWy1pW3NRu~ z`@1LUG6krVbhzo?xmlD)zNkB&oOH&>1W#`a5@Afu${#<<#bXCYBQmoFRrxv6T?8%_ zb7BsW6DTPUsPz>-NhPG?p6J#(2>#CPjGLClaH03;4SJb4wtZ5eg*r6$ai+5SfcNoq z!nf1s8o{AvsLuUR%gfi&{_^whXd;*E@p(UOzYk=; zmzO|)YGwoe=SoxCnj2ohMk}>A%2ELKCw8NqL7WaB%mb|4=3G=tLq|@-oVIALJ4|N} z0U@D7B`ivkN6R(E75yfCxuWnUo+TE8IQdl{w8bp(uRaNUI$=an5@E?Xsqf%TA-FV> za_<-`F}s7G){j%iX{|L&udd#9M2wY=#o}bPw(>i~XK=KN20U^GZVrR(mYv3s53htL zc&;**GB!6ilaJk#v*;ninl`aU9yQ^Pp@K-?-7}KGwK*aK<^FfA6h}0b`i$)CY$fU4 zG1xRnlx!KzRS~^hy5ix>0khcRyT^yK+|tlJ{D2gPtRyhqYF9f~JUa}BgfR3`%zdP! z$=CV!Fn-nh4g{b;y6&D&(CKo3G&=|f!PEo#^8Lq7i5tydQA0FRz@^#_gOR)JrvuUJ z^?8!)ih^x~j<1EKPhCW@m-pDeD~e+(_5?go)Hj7qrme{j(5ll#YEVI1TZw+H)?>#| za!zJbMuJaV7GHZs{eHuX;=+v1OPKaT6s2~Q#sZ91`=?g#mo385QDwrS#VO)wd>WM`Z}Y6QN- zCd0(2G&|b++;U22BKp9|GB}j780m@;C9IX3>v>PDSfS_yll_k(r584w)R1$u9yz{m zvKT3U3|EOpJ`L(z?jAGj>b)+OPaUdi!>#wdbLJQ1H`)APa(xXU&YXV=?-uju%T;LU zA6nF;N8$iU^1yH&x$#^d+VfVUa!-ExVVC3x6{S4p@u(%jZ*6afzqZ}!Zveg`PV+Iwdj~`+Lt`?cWWX%ytW%aAsV5etS|F#B(Hp1m&yb z4t$eatig#}B3UU1yZ<)50IHv07KA9Q#DGe+#9b*Jw=6v6R6mp5{LBQLG}>AFy3PF5nHP~Ufb_8U$|uFKRh0%wAY$kE*s*aR-F>l=Msu_5UEv3~ z1tOsc@86q}(4x{(XS1P=9ya5J(Qd2t8ZJSPJ=lbvw#lT?^2zQDtJnE2(Hv3#u=13^ zd0jrpv(Gu(KfTkinh6pL&X0oC`=4ugUHfc&O%gk-3OwVLay7o@xA0N#4vMh$fPep9_3ZEWwz-{)m*YyOTFLco?jlx_T2zs}L=e?=^Y zaTM+2PV7wdgmllL;fRY*4jTAzDTP)Sx5{RKnQ?#l6>&e07gq0iY=}W7i1*O$`R4Zw z=E1C%PKB_i{FH?zTS7s%z25RW)PdJssvU~nUL7RbXrpyyS18_h zq>so~0iR>AVB&U;^YxH;GR*!=K9e+vC8?PjBhooZ1c0CI7MqFPZFqXet8asR(}O|8jU16+D$OF=1cev2)p|So zG564}3jYW81RIdHrT8GU&#VPL3Z6NLnw61=B!GBg=&^jI3i2N7&lPGutwG?MtNpE? z>MB=^AFXZCa+}WH{S-T?QHO74szEq7e4DqZsUa5|8tJ)pGTpV%YQav3YkCm-j^E3S zPno<2iTwEN_JD0l7DIgncYEdV;lv*O2h%6a$z<=^s{LvOjGB%44Yie5P5qbtpIm-_ zvW~8J3r!^b8ODhE9zx8MUCh0BboE5-#QqH~+tOi6xh7F|UKjjFT50~Xblh}T8sDC< zE7VMS6Q zT-J=1S$%6Bntv%T30Gps9mHci`(85xeqaPbeR-}cOcJc;;cAqg5m1}eu3?Mxi#pAM zkQ(B)N?j%LO#ZUNy-gon5OL;Z;!wI0vHXx?`^?w>6;Bl$KHvr8}KmMzjSN2YryEk;Om{ z4IRy*=5krQV8aVYxuX^p%^`$|=O`&CY^QDfB~+&5VGZw4(Ce~c_515?^rL)Mb(cCM z3G4=v+|5>d6AJj`PFlEOPh27T<6v6oGWOp~k&hmSk!|zJl4d2s=?60o83sUVHFvCQ zes)iHY=$wK;WeY(0{u`ytEnz(04je&>=$lvAX(`gquSJESQGP(kQNa-%wj36W^8Oy z%YK|UH~6nHrk0sTM?73yIKPPCh;Q$7FP*rljCL6*r&9BL2PumdzuH9L=(=iD4-ErF z1>RtK>=4z}kNx&tM{g3(6vt}IL~kr0fQb{7k5j9snn@4S5436VM3G_8pI}Wm**~z! zDN6Tu$vC+-YT8KraDRQ(GG2J4VGM@fZFi?^_MG}?L;NL`hL&nW8D)huRb?YeaQ>Is z-!|ofB+z@GG=OxB8KgKB5sW2@me1we#8~II!m#mQM0@4yHZy~=MgMUp4FU=!kFO#C z{4mcKA(|8Byfx+A*-8{rqdo$4_{s+EwiV&UB1!-*DZC~rG4xx&4VmtPzrNp@Y#G-! ze9Nz91Wc)`ePXjWb5rT$;i_G++~I+ka#^qBu2RILr>+r;=ipx1KPK*-Flw8ardoVH zi06mljlgHQy^K!7r9qdFNfwd_-l&&jSQNIE>_x+V?e>b+-~(Yrh-~c10>g)MTl1-t zaAd3ajg1?U=Qwsb-lVVsVQFO@t~#C1Yd~crnO778YUj_oEF}+48{=FuQ zf+*ya?(oLHe;XpAq@Uc_2>*H=aB4Sxd(W)M-;Dn2xSa_=nbH~AgHy9*>JHDdNRyJX z>}@cIe{hcoZW@=xfIq}8z@&x%JU_|+P(3bo8KcoFK3_TFe-D1{nb08R*(eF{`{Jw! zD-;d|9rH)Yj(NGn(a^HJ*3=7#SH_jub35U9eosL%ryK5JSqy3DFFs77=OL_KlYwD< zvKW%!kFkRQB&CcU_!%Sa@phs0$2-2et4hqJ~4xBK@a&HYz~3AU~vL1iv8m6QY_SvXaX3{|f^@0MK(Dw^RjXRf;KIqy_c z+si9S)fx*;fYLY7q0SsbgjClSy zr&k#SpvcBKc~P3-O3O)(d{4)tRu@G73|@1Z2!eHv=LZc~$;PH#n+?*^3{-v~8K0QY zIABfrLYeZFvbj<9#@8kTfp-qd+O5|1wzQ~ZV2(~GNBo-+EsW?dN_B)YMe`QI9Ugld0c|HtU%&Hq8T@-dd(;wAu+y8epatH4IsL zrA+nH82v|8l7C2Sty1hDM|D#&77Wtr?|aX00!Q3rGh~1aZ2aqP)`NLd8YF5+Y{cM+ z6+Z^-i*?%dU+pxJipbGhmD?=Xl~f) zthSNK;av5}$;lfpFaD$7zai#hcucUQlwa3j+XInVET2(%Q*n zEHzpex-=+_l9)F7kHnKj#l&pcQEfjy+>x4ykD_v7GHKUf2}DO>n zTbsaZVXvUZMs60Jx}Zuvw>{PPywMnO<6WK59q%;IX%RZ~YL>9{08x`%7rcQc=Bc9A*Pm3Yg>z*g#Mr#A z0)OlFLEME7dBsa?R6ct>DHo+|thEtVSfTA)`HQzV0W-30_op2yPm{73v&T>?D~6UE zWktnb%36w9{7K7c$#K=2MMJZd+RlG>Cj3;Ov7`c^oSYo_Or4GOfK>$=dPS7BzZdgH zra#Kwt-xZlGF`)^hvlJ(DLB9Iq`G`AT!JepNbv$`9s*B(ivOtABP1Xo@VW=cCq9Sq z>?y{mL5fl#Ko#M9cWM6zPkJJQN1y^SmR4`|1Kf6r`9gVgp&0wTR<6xHxk#30Se z;;a>$aS{W|%zQz_5+Nir$ z$*=5~nHDpunh5@N_1cKHw>eyFS1<|4uWx>|(eZ(;agX{2Iw1a+3;KnIRB|J6KUG`# zJ8T|#@zmhrXiHe5p0Y&ays4#)zb`g07?xnj)-m*-IbxwP6-oCCOY33ZAY8OJKQUlV z=!RX7T6xWv2fwT&EbtQey{1y4YotM4gDwuO0*l~({YE;9SYO>mR%K@ohP~_Ur7p!7 z-8pZV6y37OBRD&oES^kg*uHzdO1H3akyi_3di7^D zDk`dXp>w0TRT20FMIHM zzciQMJFLoTwgO){i~psbo}Tih=emF7&EH+ud5!2XxmZUZpL{*SNfpP^^mLRze{|;q zadEkR>i*#vj;#nGQg;o+E3Bp#2($zM9I9!j4Koff z$YMwspXau|L{>2$K^c{U{-WiO)!qvor1%Y@+8S?`W7to+XyT-Yi9hCI6Fs6M2Sz`y z-6M_kn)Xp{Ww1_*Gm(cK>eS(~Os4S-OOzfV`*3%YZBow12%C!old-W>eLoC;0wuZF zC`)#Z`C4?k+(-1{N{zwC{lK3WT{3A-el4OCa1+5BK+|+K$d9;mkrn~=PSsc?{QVJ4 z!~rIiHj->7+~@q**w|m2uM=OIJtfJY{UO;_vj3H#pypSb>B z;sHwXVFFn8bJ3e*Mniy}B&Yl$DGj{Z;km2a$^f-uaGJf!Dmgr)8C?6KeoVnA7p-2p zzU5-9_kkrzX}BU3`5);HIqruPJ21xzeJ0x`nH|U%h&er4&rI_>V0ZtC-^pfQ{cEdX zTVw2lY%D@p4Xk&9x>-zH+?Mf?A;fH{`m;%yIy*1VR1ScGLLHVirmI@LD5`e{a(jeW4&;#2bwm%6xxOh0z zfcTMZB}yK@a%Q+qE3j0l?tm@oy{6Wy4WRKcUAy-4A#n0tgT0nw%G6;?efy*;i@%T3 zE7q`Dc~@fq1QWZyH&z)^j~&Dg80Umxyi}KY10;>EyZY;zW3g7}CXqQuzlgxvw*5D>InM))odz-W+)py)Lo5EN{-jA3Z)^D>hz98{2yd#kx{g22oQ>#S&seiA2*NN68IR5$D?5nV;W=fTJr)DdpuyH(Q9Jw%A;N0Na4DAUoR4HiGx zO99+W`-Cm{yB_`K<99xN#n{f`-A}LDDrvWNk4*reWk~-8wvkWm>$HF7U8VE6TovAE zG|~#Us+=wA!0u8V7gTS1uc))UoIg3!CedHp%mNVP@dh@0HABc&9@c+pq@i}C-L*>} z8rY}};1nvWj#QVA5jQrP^mI6^Fl2khbtCWypb8%tk7IZ~C7eo7Uqi7;S3lIo#995w zN%?{X)Y!)ND0|6+iC?*<3odjO!P@xQLLXl`*OBlFgbOs-6nxh<|ACb9Tn=n^DJSEO zrzp%*9ewl1Sk7N(ziVuo(eURbhB;r}qh25DPa06Sf&6fCazxX3>~Y3!v^4IrvCm%q zs~!cH2;r$A)?)_xSdW|P<`QO7ezKu0+FBNhYTT5N?&II#-haurZpG|>?pdYB4Dvhe zy|S3_4qBdHb{7ADzdd_s#(jOn62jIfu`M6(CVBRQLkDC!)xwHHk{b(OT2skwv%2z9 z=ktxDFnWyYO-HvJMgblr=kP1L1j_FXRN!6Kuu%$YO};-JqYr~{zH6HO3_ZO$Mjp2q z3WPN>vrM|D+~>N0-763w&w{EzLo8^0v8d)`i@jVs!hFba@3f{soz?LYe(UbF!{ybZ zAYmZ8Q9`s53H1Dtwa)bm8CY%p#S|&H+hhN|<9lE34sKeA)oi%5%3W|ZY9v9zSCuD^%?qc>gH9mf>!BMidEiS*c;|7HeW@iFCFmLs0 zPObQ5^PH@_+}A5lNeW1m3%7{t(id5b0Gif zx4mk8GS=YJlTG!jRW#}pY_Ljhx0D)`*zV{v(fe=~cR7qReII!yHiwm9<_=8bKTY5D zrv&}+0s2rD!~Y`ozym1BbsqW}0ofe|hpnhM zwMiZ>6lF^Rnn;l&2dOVR_~btEhAtJFm%^^q*@{@Yd2m?VOnDPdGodSdPl4S%nhkCP=+wyW7X zt;-pOGL-Q@{$4Cv(F_mBctY&VjPwOP*}qz*d{OOkkkjuuBgMo#AitRRL$Hv`yIF`G zR3+cv+jFa0$BSlNHvHL_eVIF>VCw=3O$5i0w3!T)sAdTe22UK41W-YSm0Jh=JM}-; zH79>26Eu>T{9}G<8hFt_K*R!r{OXtkiZUU=r%nypBylJdk9{W$6P~b~hVxtriVe4Q z%!-SRLsrX4heXK{Z%-OY^c4%>Dr|-auf25~8}ABmecbMpANaJ96X zD0u@6SU;hF$c_6?OLbPtlj#b|C(mdhf3n-6SS9I=#}-3RPA>XWv+wF14}|ZDKJujR zR{|a_8c#%NhB=-#X^^6OvBP#0v(G+M3n%lBYn_iW{mluGUfc-Lf-v#9um0*gl$ZVp z0Gl_Q7x(qNd;cFf%PGK%`JLD=xO^9@Z=#aL9%b*yGsB?$Y!MG>-TPA%{FP{)ytB}G zIrF_HN%*8RHDnaI$%Bl<-037NXbvpt_g4xLhvRbM2_}}xM1D4%zOWCOoefFLpd48F%YJhANf*N0 zsCk_XE_z7$I=6A(ZZ8W{3F=6o?>6ElNfmW0Vx9H+QY^s1Jrc|P`Tmf6L$gva{+m&7 zYV99@VIw>XuNu*ADhwAK{$=Y$4Y`_4panpKh2Eg*O4kju|qkpy3-bcP6o9CJekR)8l#Y)7vv5HD% z8oM`93>TRh@1(1KaA}m#&%mqx+EHNtcDpw#Ln0p&mT#@M zX7GJER+qK?%+XBhr1bfUCm-B)^kVPKIK~xq^0_i}s_y&9@xQEd?_<8TqiVNw1|p|Y zH!(MlUux3laDC6CQJw6sSw;cc8lC|E5|LUhXhX*QV|&X;hXnBc3|)5!)Yt0?q_Do< z+qj$@S64Fp9-AUi=*+v4##e-9Za<=;Ir!LD_U#HOAR0JC0&*CdQW2uEv7HFgh9GM8 zU;u|!<+G{%6-4cs*Ys=xvUD?n)Cj4}XW^r2j)HRfn(lZ>E^ViVC@glV4SrSyxfN+(@9p2M7q0=^7r>> zz@JwW0#WP(Ky^g710ZXcdAi;hIl1|!QNks!hKImpNOJZS+U7K2j2+@?-9$l zGdM22HQ06T$vi->vlWJN{oVR$v$8K3-ZtHI;u2Qndc5;^WvUI}{^nZ4#_;)i6UbVW>h#on+m$79Qel}bUB@4QglIR=2F*H6}MNrQZ(*WaXjO!tQsCK0Z;-?@Ba$4VouVY3q(oD zJcbl-3*6&y+r?v=n+y9qE9yIPNVkh=)x!yRhoEAf+2GvBL>9yT<^|ROr}Lqh!`J8o zQK}!+Wn|=U=0!6L$eYBWzb+OvfM9r1ul>VmxKe}YqliivHy18zwC={?OvRNgVw|a{ zC@&vXyhU-?gl@lSq3TTSY^fNTs6QBejx~sen#{1ctIqD$#p~1Q+>q@DN0LSn9BRnk zs;LtVl7ad6+I&XXDc$`m(c?wD5ngf`+I4xbs3|`w8EL)Q0jMiP#@FO;rZLaEc7>k` z2-i2in5iUlVAFi-Ce{x#b)4#f?^tB{B%q0nr2us|oYUnCaT(TM_;ebf?!2LHWgUX^ zTi1p3bm)Tl+Vz`T>}wu0)8W_+wW10^dHIyLcm9i)Ua>cnSDFcfW&)4h$I#n7h=V{=G7hlHezv@lf7Oyh<4CjHAAgDp!c zKnEh`_`YVohKU8151Xm*3u-)9v=d1V%k^0pP^9UPfQRkP4`DXX_20cHIcnIS8F}sV z`_-_<=^Jlk=J9Uw;4hjY#-@~Zfs8eF-+>nCsFUAZ7liFM`X);3?6UUOQ7RYzXUaDz z`4y)P|JR1tK!%M^`eth-4?PmT3ysJYG4Yh+OUJpU^@;$)Kq`SO5DaA2A!P8W?RR!Per}U7e>pAA=sXwxz<~FfdH~_%(oL zAv4~u01B}M$8oyo&Jx(hcsxwAy;b;J^&Y$Lg$3`xL#xq;E3e-^ZwNiysuc4}oMtuN zk7-6Nc%^Di8k`OzMNlu=-+m&K?%8IOuVd37gqY_3v3~^R?jxOOy1ikkzXZSRO~3C^ zhT3NP_xCUMVXQY#dT1r9bJgETfw~b$!mtE#p;w{RAxiAYJo zZMGABp>2sJe!H z)y5EMMzx>~Q$Un<`^HWu4V9;pZ?hyL6S+`f>Xc6_lo!|_kaCts`q*?$aC&;mWa?iu zI9wRwXx`d}DkK_yP`X!!h2npKF{eD%XNpb*N!|phcDo?9wxJWg&|=7p%Gw*1?euzt zYsMTiT9xLudD`ErO|<9K1&)LU{lOVc7>tTf>2LeYZnqk4U>o+CLx2-WZql%S=-rJ? zsAiXtK34_r9iT(R&Q;PDebGWN_yxy_l1OBEsZZ{wmyT3-KQf2;^H&~b8F+tR`}IcO z7Pp=D>{xSG2_$Tb6CaV?Hp$a|Nk#n@0491u3sq-#2!&`eW}Yov5v&P+=xpn=iQVla7Ej z0HlM-xQ~vX;#@L}DbJa!V$XkYOTCru`}RfLJS;#OibtS(Nh;ZUf(@8|G|_^J&JZbc zb4YZEoD=W2oMO?Bs01f>-bnL!7Av#|G%84}zY?WrW{uyAt&{e8PIP}4KC@}72sig%y^^-N)sY#BW}R zIPFTI$m356rdKEQ%VJEt1CCJbfYI2*)j?a5=g4m0sn;WXxj&)C=VZ&s6U5vjd*m|c zHI;&J=sqULD{Z0QvV}}H$Zb{oshMZ1u!|``g?GiD_!s&~sDjy1rKGxtJ8yb67wSz< zPEY&de`4z_ENyer^9Z0`V)B;hOd~^?H|RVlIZ}!gPR{ogXlP5AaEN}{d`a|}$lt4d zBq4mW!@Pn|t4V`YzrXHl-TK4=pMIvOaf)B4E3y%V@RyL>$?N_&_m;Vb`g1y`fEf`{ z;@2N47ag}jG};tu$=gjv$O=W4W}Daej8}RiCE*IimKF|}uJzyozt4wwQc!HWZ5QaL zMpX|~$l6(o_|fOO#_@STlWB$PPnSuVr-yJx4T&P)^roXBN>8j1yRex>L3iyPo58s8 zA7=&Hf6?U~C8S*}Lw8mJvIov@_m@`ShO(rtce^pJa=$_veLcpmdY3snqZ3_k{il23 zXroU%u)kO;O&4RG{0YVAP@(Hzq`Vs#B2=>bX;9&0Yq2JtH2+^dbeR(7#^Q4w{I@of zuw?|Rn=Pa(#@pWxpxaIl-p1x|p%Gpo^v^Eh|9T3{5XOGW4n#v2Dd7OBf*nafUbQRHCk%l&E#`udADz6 zjJA?Jak5c}VW785*B;g%1c0I0_?m4%&p02|a0!N6lFXw3NtS6PbXLc1s}K*&C`K^O zvK5-2a^y=@evkw}fc^bc8{UsfrU>nviMuA>eG1?DpNVd<*WZ$G?*#RuD?PuT+6xIK zevhROQERO-l)!s?gra`&QgQY9JY=RcG!fF{_8oMDwlMT6@XYzD#rf}4ks&UnVWb2A zd8PC7@6IWJVq-+r2~{Ey9KuW+^oAHFo9egX3 z|MqYaV`=c;(Oe|~t&osGj@ic<0Di~I%lLiRnhOQamz3S`0y9+V)o}+H0O~w@(ALg~ z+MZiE-^W>@IJa~Gx(L5ui32Oa|JDNhWall+lB}9joyG@ocKjdn%TD9zAE%-DgVSu4D$=}S%VW?l9 zm{mM?;Tn0vi8_r3C?TSbL4NE6#KN)tj0~T~u-z{RqJ@~rSqa^pR&EraC+q%r-$|_r95jS=++ z*Qma;_EJg^>N*`oh-TNazMe!iBY=AD$}n_xqF~c44e)rjF*U&CfvuVPY>8#OD=D+J zQ9dEL7$2mLd0f9Uwl@@u>^)Drn8Nz0rd!x>=|{}g+e0yg*x?Zo7Pq&zGY2jt?a#8% zgCV-&zRn_K(yq8e1-99r5*o57zVO~sG+Dntz!MTkK?mt*dpphK_|NttCCZ9VsZrSt zC0^rTS_*9or33wQdO{$WC#+l4Xf1x!V496~Elf8l@Y{-2%zQxixjYJnm=2f40%Dih zKoBToQ8J=;c9l#lmMB!Z`n`3@$2Tg3QqaUlLH7;P_l`M*pLrzSpQec+%zVfNC!sJk zcqW!kVr2yzuKK!^2KiK_qaUK_miL7*-5|2io;ArqqeKTyEps7RM4m8e_LiCa47iYwg<$KmkB@k@jk?N2RRC=w7=fd zBlqucaUXKb8#rs=Q26ZvpzbtX$4#Qlj~eCys&9!PT6ErKL`(voDGESAxD+joL2Wt@ z8ZiGHseU%(4#)pP)mH{o6*k>UN-2jvbTs+-QC^YB@Kt}PH7Mj zq@?R^e82bJ@BZ`$o@dXVnP+CrTC?9^n@G6wkUS-Y)mDFE$N8Ak*djp0Uy_L@N+q*05 z<@W0jTQSKe)L@XFZugYx!{;J}We$!h%E1Be@Y-C}KJ>{p_OxpoTAtUm4GAZN(|XDp zejah_gP%};fc6NigcvAT801F|_3~nF zf`~*LUT=yT#XHzFu6bK3M*BAMnTQcK#T5;YwgEu_$QJE{q_MtmzFKptl7dMQjv*Fq z296DVnx5s-uP%sc`dF}sP_$KB9Gc$ndm0eMUQ}xUK*ACZX@p|m1?)=&v(=(rc4EtI zVbslGFmP>eJ5bPxgviS=Yipy%rb{hvsS=;%@2e)sOmA!&XP;pQD#~E^`_P0Zg#A^< zdb4Y0#y(E3K;@H10kDz8_&zvXoJYm~I3+qJ-i{DCRiu*Wmx^xEEv1?IkZke5PNHR% z;H!<)rK+5moSN*nkYGefgUpyXwic+L(DH;6i>+KEj(Y8q$T^^L%E5xWfrVvXH6DUe z!N6ENcwHi=xozqcNhjFu__FpTrsS0m!s+OGms@R17E&|=*SQV_2Zv*1{r?qL-wv{P zf-i4p(Z5Tz1=g$m!4au}sk0Q#V^vpITTBeyfW(pS^h*O#Aq$q+WK31+E3#Q-SO z8svI-!P(&gDsk!obC^{2jhdgLY?OQ4kE=UkUbfEA;9UO+R!@fwG%(|ETr|2Zft}r= zKiNjWUk$raLjL-G$Ko0agfW!y*=iY4+}5rTk7r%0TZc(^M#$YItVuo1l_EH*^x7;#-oVCbq02lKQ69XDCsFc}>m_Xoo9tjtR`Z z@zHFM?b0lg zv})w`Al=&#ptZjh5r#+wQ%ICE{W)POzZrys4!(?L<__T(iC7_58=>q+xq;)Q(gFL8 zTHF5}q2}dl*?D)BGL#}(5ty2TX*@&|0Awv7+4y@_Ya9h*e{^_@=ITdWKioYf4|}*; zJovb7mi#2O)LmD(fP*Iv#g(*GaSMnBBQGrfpo37+s9yhc54CctQM8!pct8&I{5g@I zblYEu<{K*s1^AMmyxXG7RgEVka2=i0rlQ$`DMtr7*X}M&eudyM?C%G+=St-o)|vrI zy(${XX}a!o;|XMxCqyIfwib^4I8GaqPhWdO@Fdd@z5+x$rVT)WUI)=kk_X7#!dECs z2P7Y5oqU$|g8=R?hS;P`nH?Qi{+DJ#Tmith^E&4R&?Y1e%zIv2+yF*OHkkx$A1h zG3#3eRq&wz?Wi63HJJT{YBP!9EK|0&&K6q0&HpD6pVJ3e*@yol5VryTk+bSg{rB`6 za8hTF+F#G0Lysth`yZ}yz9HOsT!4Z<*CJMzePex-{!CwYFp7x~%}@BlL#|l?<=$*%&4l7c8oyGQMiB4Trlq8nl*C4fXt+|nLJDXCyy^-X zW%WSk?_@1U03=o(gVkdH1kV1C4F3W_PCgFc9wX_8ev)2KOf zSY)||zbjhd&BBi*ob(8VuGJ!O>+&S0Uayf*29I6iaJ!ZGTGq3-3eCC^0xGxZ<1buw zvnB8rUyhcUX#6TUVbrvmuL$1}@$^*Tv%9R#0_!(5I6ZH&kYn_+lR_ zJlJBzW3E8UKGvYKVMVIMVM>KW3Y-8gwoqU#N<7$%$rnEMkfwtBQeReI^ZDIxNqL8g z#VH}vnr7q*hT0s(R4E#6wl1X5b)ui&j7Sj*e{OAdP7VP}rYO)}y&C;{k#9~- zv46sv{?0!XXK7-)X6>9}z43(P7L%wu|M!nCf8bdab>A>Z0&b^$#)_XxjooCg{hQe( zt2j42>*#irJmAp}*`fdH6AJ`2$Ms+Y3s3=LM?@%s|87awSrj}~!=%FwDMjGjiOyv( z*x1b}P=P)qtnLf2fUFw;Iv8i|ul))a1ilg)wtEzR z;yiQ(V!!hRhypH1;d2C)VF)x{&q?@#>{9sLHe|4W%O^yXU+v zHmpr$VvV-HMaqqKzIaNtf3p)ln#$wo^1&qOdpSZu_o8Id-p?P%{H$E42n}O?R>hlX z2HRE~;jo3fd2Z{qdN}mm^10uGp{?2g{rHPC1~izdpM{p249|n9YgFJjI6FHYK-^r& zE^)cXn$;e#1^%mpmO1*rI%u*0Gwed8FCS<`GX(?FV`~hkiRyWp)F8;HRB9oV#)v2& z@=n}e3~GjIfahqlX{yjbP-HAZ+^KpE+1~8G;+B{9t8Ft$kK-zf&dgWPk3kV)tCOtW zj28lwnrR znk;aui`{wiEM&fk2BS_wET*QaOur!-Vff~zp3T1oq{Z&LrbnEJ-^D0|uzME%Jqs|? z5aAwg(X4=FkEWiovS6^<+FJZ9Ck`0Tct!lqg!B5;a~M!$ngGvftCr!|aj1c8m=SP; z6@Gj@V|MwrI8Z=E;r_caAMUMyv?P zvBi9Tho^SwzYpWF>p7YB#@bsswbIr-I9A651RTi0CL{A7z`>N;Wg{P+?^;pnf7gtW z8gRyHk0IQ&cVAFyxvhmqCBsjEWkKcleSX((%|kY(4S1O3{L}KZe58NRLxKCAf~T*B^UVV(jW)p9{lNmz2NXgC~_0I4E6L`07xW7M;2nX1FgZLjIn5h~HcF(s} z)hOdk1al=0#8_TH#%1z9E7xAZ3DO{c^7si1K^DuwZsEiwTn00E02(oU1_$t$^0)e{ z?N@lyu8)PB0z))^6G&ih0Uan^Gd)LsTZZOKPqGcZt9Tmix8+4ZJ&;T0HG5$CWs6nT zVVY)NIzCSm zpAAG)t2bLlgJ~+n21@)+oQFtJh4=*U1_!?THS&zSV)3NJgM(uR+C`cG|1OaaW6^|s zasw^O*9v2@1g6&Dvub8Q&l(MekD#R#pTrke`+1mJV&EYi_G;QI(0xA!pgL?KK{=l9 zqE(b4F(^%6Z|)O-F`XbcM&W%bypwk-&r64)@VjE42VnN^6R@ELmpPN=0^72rp}c&2 z$=ewN;48N!!r7Aivqi0#X_o)$OLMQ{0DWnHXS1zA&=IM{QS$w9OrAK+3aU?PZf#6? z&KOs72O)KU$00{AYQkRvK=3vrq5v3p)(4`|VnGui&(s_D=V5Z^7x_ek5tW9XX;pOjAS@aCPOG_Bweg=WpC?q>NP%iVPZZH z-Twf_@AIY{WmQWz{)C>B{n~oTS9Z z@{HXi{6?jbBVs^(_$&OQ#ax0G3qj)1{sh_lBK>L7O%nPpQWBEM5{Y;6nH=N|4Yx9+ za-r`EEo<%2+^J0KV&=#7VMfFA zrjOC2RiNK&^=^t~|7=q2zG=O}_ZeBJ+$hB1)o%(2KeG9}b(avpIeq*oSM_=30o8g* zcM#a?<6jPm2@mU~3~4smbBnkJ`b|@XH z0=zJP%W0wpi7Ub_6)hz#e2do@qpWb0`0BW$tN<(=rz7-{EW|xQa-LG>^eaX-pg;t< z`RsRsCRpJ;WWvNs8z~-5F_1^Vl?MJZQ2?E67T5;z;jLt%owtsbVrQ+{tbS088X=ir zhGiCuzQ&U7r;=w+(3F6JX0AvVB5>$2P44jBvcxys81=A6`*&*>=K~B=hVqVruYoCO z*u5QVRV+9qVnS4~a=-KO-HDw?*j*66#_#oseX%4#s2e30)+OZM6KdOhkCjX{R&Wx@ zv$;H{h7`=%`Puza5E*s8Z5EYuG`4U?<#G5PFJ22Q!RV@qMOmhoCj$8BotS{AC_u)x%VNO!Pm5n)sM01_cMT00$CSbMir*S2Fw#HJq5cr)VSAAFOFP z4De7rxbG}^0KJBVJCz`?2IN@+3@$m~qJ(v7R!aPwDOi*Mn02}Nx8(qfS9xEe zwpc>64{@Lpw0~h=`|k;wbvnuHOFeJ;{}^9=A_V0h-4pFlo&h)^#fxWCBQWz&@=^Na zYva9eOhH*n5!GX6JHAF2S-ylG+>|ko7NZ6yY3D8$nz@gpp>&XU&Iz+9L@z&(${dY~z7Y~2ynhPFHUW$7hLZ2mz*I`^; z2P^H><8)u&UZ2cgO1PZNbrST?=nSg{oD>g zW!(NApjB>Z!2^x@VQ;0M*`S$H@*Gp=8G!7ceF<2Bb$68}!nYPev}LFb2e1mq%{r=V ztj_tCGJ+z39SA@}3k(xu4vDX9v(n7@w6(R3mwjv&NUMk)nlY@t=>@uR)o?qDVpyjW z_16A#v;=cb{>uO7XnE zUs+t35e+3sU4l{c1rp;_K4Tm6)GGykU)fjESn-kGxcLEw*c6ng`-#WNz29lR4j%qI z`g3&DcK7~$@dpS7lN2&o(8Nqz{p#Vndho;D~OjYpYQ z8cqifgaD!YO75MSSOHyXm_2!;BRY4R6vHQiu?3>u0QRE!S($FLrD6!`m)-tFzt&)p z0`J*>=8j;V_T#!QBW8TAutUkJWSQh;V5=BrGhwP!6<^V z<*m4~aT$pkP-z-kxI2C6j*|;d})JD@4sNz>$i3ZVnXkKoVee&e}30Tx)|?- z%XruQS7Z9Ca)&8#9r!w1Lw;wG78$CYznLbA3N4ysR;O1L)e98F#}6;@kFbv{LpKY$^SA?tE@+AZB#N}vJy>BR?&JT;tfuFU!jSd zO1-Noj@3t3hYSPV@I@C$10)EGoIJ3=u04#8vqP#!D{~xQ>vpqu0g8MlJFg?}+6svV zx1c~lFwpcIt^&10k7ivr75dgZ-v1SA zUCphXSdFM$3lVTkFrErFih2jqC=oe>=kx{3y7~@LB1yxk;ZX!(1+CD#CYNN-?7MoR zu^|tXjr$zWt#>w-o}L^yHMzNDiT1cz-1QnG&Q?%5#Y^n;*UFVbh}rtaet(IHw@NS` zo?|~;aRat`M&!Ir;J{+*!{=N`tPxb*=_SSqt`4O@7QrZ9%KdO7Jy}It8up#=^l-Dy zn6@k=Pv_LIO7{rVi_9Jq@2_D*7t&;)mK)rF@A} z5|PGPeZjl?vR|X&^StlTK(Gl`SX9SFk|um*<&5P>!7NyB#CWX^KS$njHAyKMJpJM*8@Oi?5z!RZ-FRYAYuVp(gSt`R4)Pby79tF%71|2b%n+cO4ogYs9_c4uZ zY@%kRLaNE0&sAcztoqh^mXLPSXZ8SHQ$Fzeyf3_HEf3Wr1Wzsex63;ND=u$HZv~fF z9}38il-TMhlpqNUR@D$#a3A`_u4d(HemxwYvMY^csuZ~PLz2v#~ixK?}GA`n`QSH8Fy92*L^+cUX zP_2buTN`_a-z%p3lZ$JeMF%zUMby2iPZThi0mwsMT@nA|9~!+4m*~7YMhV z{vbEY8{K7sUss00gPXLycqPJ2tkSG3`I+Y?oRVm_jh%zW!FjKllQP$t= z^U)Mw>AuER2e7?5_$MB z$HI0$8rRjH5(YSsZhdG%Y*8_us)00|Dn$$YB?e?>3Hz|V@+~r?4pfWvY#U3@`6N9y zAV`?#w>*IiCxSuP%R_Co>Ly@H3WbWkN5lUjwip| zbU?uQ>l$gy4LfB(J=jkBhJb5CsR6FxP-11c+A1hf+Gzv?{>nJSr4A`li24o>{OD6#Yha)JG4Cr&hWZ3!TA4jJggZy=>1LT2`PO7MVi5?;7A z2t8)l)hmB}S#OyL3Ci|Q3V$|y`2`muM14=i7wjq)mU(F{`S7DM+hP*C z%E=@O>cN=AZStoGfTvQ!%6q{`5ekn8`4ByuBk$@N(k6lt3L9}cuWc%n_DJxi>V3!? znX@oV{?D;%c)0!1fy<$49U4L%6wL#(0H0y+j@^?v{Vw{&pb9wZJs$Z5$}8fxcze`R z|K$SUO^=i(^cf;>RvYm(vgk(?Eq|S~yVWkeVQ}xNt1e_(5ss%o`k*0<0n>i#0e|m% zfBMH;ux74zX5`#ms=Bp~e__7Fz;zVHUT?4+|9I+mm&A8X4HIzvKA{t;Qn56w`cVP2 zC4}@xAlTPv;9NT{LOZ_RRfo&b7pxh-=CXkZIST-XcBBXMtXYKCbm6IQ@jWM-nF+9~ zy(9*#$&m}&$oar8zyA`L3M;%a^Pvd%Uq_ObbqVl#rDuA3S2hlKj zZ!FKN28t9tA9(ly2EFyc z2n()q#B%*om8)}b@$GiAG9^t^AfO)nD|fE*X$f@ z%_0G9Vi>cn3=SIKdFX0p#Yp02fN+el3}ulkeU)ks_zf1$Ik?`i;uU73FV(CXw~mJg z3DuZ*=kV}y);irAOO$VV?(gBpkT8^Plp6}B;&us>nvxr`(l2w)HL!rj}c6gfg4NL5X2q3}6_`<4%>3C%$Ik^7f6HypqGYA$XEI#Cm ztK19^rR+Nzo@c*5x~hI$ThlPb5(y)ym=MLFkQzz&%K{gB_XYojWbzr_=c^?=V7DK2 z78Gyg`l^+k+H`xWo`FzZbILhg;5j?klmZzcX+ZNRrVh@LgE}ZXZ>f1Gq?I)ItKg?d zuG;w=-Cj$b4$FFz^FxkHUj;=)Nl7>Udjy1y636PCMvPEJMVa2w0cl?TcOr$3Txicb z62cl=u0%fJ9c`Ed2Q@zNN949NKmk6HB&DRTDhJ6F$GQujW`tj{G?h^ zgo8CAY*6XjU#svTZHPtc&Jr6pu!WSsat{iY&)_*P>g5%v3YW`FcjIVML)^0%Sj z++3WMm6i4T%rytCh*8)=gAK8$m>A^qgL9Lsi?04RE3>FLP~fS-vgyUati@Cwz^myx zNK8nhx*v{O-&;6voZtGqLlO7h1MQb+%cjm}@>*JZW2ychEnS1Xixy;;uOW{&%krH|QLS=l(;^z|7%Kn0oJAB=V%hF&Mp zpRibad6|E-2h{rhl{vm+@2oU@N^rKQ)EV;Kd;UhpC&j~uBQ2J+CTWei)5D?PNX+qA zgp(=*O|GPb1Ky^|6uh`^=rrae&rLvn3X|k~4m5Li3*KE@bh*a+!Y+*Vc?od=)%!v7 zkGvr_v3*c!3xl?o){=p&ttWhd67Z)K~~`7f5ma2*j;=^Xw-8 z&AGehoeEXw55HA;|4(!Q*9{5euoG4_?7)IIA}c@dq!naEenzf}3HvQ+uepMl>d?A+ zLKCB-E2M%C;!jRCHTKlhCf#-|Xas|MyDIT11-M?_*1dg8_>3w1|dl zADEkqfQ^lfWKVVRk;N>Qs&5Pv>e1-I9s1gTahk`@pg*t;IUDL1UUc`T`pqX@9n7r~=M`tY20njCld1+9MK5wlMAWz_I(b%X)8eKRM- z%cvEKpz8*nnrGKev?U^TPnSi|Holy*o+hsHbFBe?z|Z(+hJ4BU$xN8k47mY1@4f*?PO!(U-d)nP={DT<$29k&!=ALRp zgvITl>a-6JZWu&7gc%=wt!?>a4*lGNTAWDH7aU?J#c*{LbNZ6OuZZ6I`&pOw)`Ts7 zP21|n%rTy%LMHq;#=aqf;k=dBl?&1?hF>L|Sgt{nap4icK<&*dlZK0DqQHk*XLMj( zQQ4VH9Lkhb!&Z{P4XcGo=#VpA#j|mxz;%rRL_^D~fc0gk^q1KWF_l%O>%6VCf0>(H zU7^4Gb0@7=C`<}^D<%dl*qi7tBQxo(tN!FUB6Dzj_pDrclVR;}H&C4>?gvR#2W_24 zd#X$w_p%f@d}KD6@K!Mf<*N2ty0n>a-n;LUI6u~*j;7T0Md#iD3)2&Qg(Sls5yf79 zlL3jr2X+0mUTMbiN+J&6@Je7Churw6biD$K!}aeg8dXw38^BI!ykYL1e!UD&roX?& zDIP3%^#xJ!wiOLpFcjlUyQ{}aYwEmb>S(?kEWrc&zoxePGLDuTrJfAddaA$I5vzRU z7rVM5xP`I&sMAx->>1<#S_tE9Dc*<_nwhCr~y&ARN#MSP*B?h;CF zF4_7)_^@bH;vEMPbmhkvysZ|mFrf4j{$=K}8IgbS_Lmn>9T!PnMZq`ZdxL|b(~`b> zz0x%qO3>hT#CUt|Tiw-Oe#OXQ#z~JnV8=Ho)Pk97>)-qgR;{H_a za@A67fAJSYfxIl#GhKP@7z8PL`C7r?`z}s^ZXLwJ3?pmjISHon;B4g&aZQ}e(mjcU zgo1vsZ`wtjf&w!p8h zt}+-@^0)E}tWk>{3_}=^>hBc$GOg%)7#RsK)`J>`sK2#^hG&+32w-JiBtZg|t4(Ez3m8LTA}dKmE9iwvOd>4H;a zoA*~6Zm1df^0c8KpDc*h;(R2ktPGkXi}ZGcizN9-O9#u%DtyPJj^aC}K`$pTGWwR5 z4=It=K*~cu2X4SvPVTmC5heNYpxzpJ$}cokPrdyrKJx)#p(bWK$6w`SiS(Yc1T*Fy zBT-IUw`scm<-+C749mA2E{OyihJ=h1G|wM9QV+VizYee7@mGJU?&*E_1@9WfjHC8?83(SJArz?k)i! zP&vE*2n$;EGr6a`o85k0_>0%EC*pOY*ym(3nSmV#b8~ufZlZNF zQp=ey7y^8eYDGTdfj4jJ=)?!-@ z@A=j;a6pR>5|bEPSEt2+T5ut=bK{7ilV{Wsnc~2z(!U1IaA{z|EO4o;n=FnAmJb;Z z7F2MrxYPQMCoXT)v)_|z<5>;VhQ3iUc850c{+=l8XLkWFs!!oBNs5ZT*DOnZbp>zR zjg9nX9A^9|>*ypotJ1cynd~@@sds``YHFzuKc=9EN!_}cdfFoIbmj6&{D&V@x+vkYKS+PC)YpLGKzRB&vQqta@ovoZb zi*s%v1197jn@NrqJm9An6i)BrcEtbp>bPsU=cEXBPZ6-hwY}JD#(KE+?S)ae(T5qo zPoF+vtQC#4yte0dAVMtNPQ-bcW7_{3%>SimQUGF|e!%(d!NFcA?8T!MWm~4)( z)dG=W>8o8ByeAvHUtAk=+0l!7HV5sQjbuOCjJ6)|z7OifB**9tC+4YI-yTO!ejn}? zhO9u8oY*Y-6?j5v3#I_vsvLM-e=r;zT*{%E+r>ft;J<(ZkV-ugt+PIHR}qZ*$cwl` zQ5T|`$gNg6?4a!NiLK8oYI_E08+nd9@x_a4(`qpraR~w4Na$UYUG|!?ULb(v7E)a* z8BT;k`W8*(G2Zc7t5Qi!e?_gSX)kNKxp?S`kx@okK|v&2bk%-fr}8%s8}zYzA6OeV zK?A%XH}^y159*jB`;~76Vlw(fer>`N5I6}87Z(po%P0VwO)33i-;<03aLRDlKHLU!Ito1>@^$C0mu);FmPPB_`o;T18|`JohLN4? z;9Lg%1$)d`0RONcf`XUdQ3)Pk85XahC@PN4IfqZ4O;1nTpGD@LoV>9?iBlU1*iF#MFKVsOnIIz)EH;fTppD(gHSAmlk;=>Aay68Kd2j*?X*CuBj2{!K)19rs*p z$3+JNrKA3!S?4KhY=m|?y9xa3W1%21BbLn_xsG3|6d!J1{5`m%q@t$g$~P%6u)Y-> zg(+**{&EV^#W044ho3Mx{m>N87T-g-&sZ$&Mucg!wrM}Ruf9_h7xzJ2Lg;%-BRxsF zqiqq9;{o|0;YIk#D$pY_HL84k2DnrI=WKOggetn?SxhC}uaXV)Z*{RQ*{7)U+)gJZu z?{RoVCZ=+D{7qY~Hf{Y;_iSg5Ikg&ELSnY_As#{~3Gn1w1_d+4DYGi|~$?EYR8gcuquAJ)A))34G-7z|9RnXa}>(*&c4p zXS^PqO5Y<~^5RfeddJ#mFJ+0S@oM+t+>3I)AQ}HPgI5hQop~oveJjt~A&jI3__MM# zQwVNV3_O$qxpb+fdRlp6czBmG0RI-(-5-pwT-QY&_!?D7*3Hc=V&P~#{oTpmvzj3_ zSm zl+K1Qua|!q6pX+ubQ)ONbvnpq4`yRGAyo{Rh9d<)w)Fp;ui5X0&t-vQHzwC}Ujre8 zS}#<=J=|SMjlVWfuKmJ?h+kj6g|09&ld~PI@)hgz9h#=yqIXpld!6l1-GT8ruD52u z6vG#cFTg^#lD5{Dq5FCS2!;u121Z~^!B7HB{UmnqHImvcfpL>K7iKT^X+o^UXZbw; z>I~?s?+OtErmZ8Telj4xBU~atnnis+m;FPD&~Wwd-8Zx}PY-mPeoSCraT9x+G&7M| zBQpcTfbA7*KwnXm6B6gTeZ<8MpuO^UIjVricYXn|u%wFQm9Gm{MnDVvC*h;+7Qo(3+z+gB67^=+7i=#kWPh{l3;1cn;&vwexrHMZ}r;@{f9n|S`{o)P0 zK$f6wWe^!@asb};3R5y7WTE{v7J4JaM5%T}7)}gMv^RzeGIF=f$9@6_yeM`NH(9hz zD(a2>b(+qwLoHZ(DGK4uJ+ND6S~<)B(9}3%LM-S4zGJEh>MU9rOM=9bFD3G$fZ5+Z zP`j}ka5f)T&9}#xK?i=;$PWt%J);2mKtgyEaUp+R^0Bx#jCs)-VB%uKjMLTo#%hsW z1;acsj&U<5g>{zjFj?(!_D1ZFS27S#TE zyIul!ZiWpqKaRs^?=gwrmGqAREQA7hPY_6EgC^lJo~2=bi!g{!>+!o1V@KK2(+^`p zRx&;xN}&qng`8i#zyQA28p!-WnOdaY#sFYin5I%n!yJxlK0g;~Y)BJWF=|6P0Ad0F zRy>y=mWeUpG##G-WQ$fHx}0UzcukX-dz=+Wc2jZDybfQ43KTLTiMS5dH+t@pE-w*KM(!kVwqUfxQ)Sh7W)~`Gjk_mw&x%y6Z-#+ z9W!5eav2E}@NtD1i9MkJO#)~OxegMZ%S`PSDDhByInA~lNQ_JfsB9bf=VGPaY&8Rw zfT~UO$4}3b5`bfH{IkOksDhyLbJPq*6%Gk0`}_MAi@SJ#4<1o}I6X+`4NcM3;zFgh za6UP1It8`90Gjf;$Mu~)bY4{G32xpRfKYep0-jfuaORpg{9DZh;w>PI!Q~oGP!o#f%X-s?%t~=loPdYEtUVXv^`OZ9{nYsgcg$ z6-_~YNXe*5Tgqh?kiC^xkpQd}D@D0gU>_T+eNlJ}-xC5((9B=c)}=LYqi zg%U>WdrDS_oxC{6uaa5>qg^tjFsjCc+3>~#4QSo`z(PlhzDS`RU6n!)w#q{*NYnNL zXB@kus$RJazTiGe$?jM%27?Zs+#e%hxJpr-;BJ81lez3{dd>RV8v7XmZ)YvuPaZNP z$S~-mKyJyjNl48|LH2a}Q6lg7#lg2W6rF^GG;A)^3@IB9n5m&lP#d!ruzo*WjuWlWp$;tb1MW36Z#$aJn^2LBq~?v zH~dInq>ORx^taX=Zq9p*V&SuiK$u?Kz&4*z=I>0WWZGmf7qAm%cQcT4;gR{oRfR&a6(_!0^lv}S<#lrL&?XtuYcfs5) z7~PSFxzjQkA|Ru-tO-4>{NAJm1G z0kL}T^|KM3vye?B+|mj3ut!-idX24B@fiAs_^M}icJ%Nz*&TR|TOhxOc(_nv^RevX z8orZDW*^QDlFln~%$@-wZpxD#0*WF1qtRw1v>-^HH7SO63mA`RhO-c@W~HZ=xiT4C zqb}(q542zu9C#vV40+xHVqqg~)cX2PzDuls{uC`#ku61FNZ7k?H_iW-3y_|I=Gs{W zHq7isc&wujsHuo0f>te!r*RUxd;JVR+hM|iMJ=QQge^u>0bejTJOn#~7KQ7AVV&}` zqpFg#D!288_QxA}3^R0UD`ri$z5s<%`(I-UF8F7n=XB*KH&v$$hexJ(j;PS>R}j_M znChca9o}jaVr*b6R^ouv`tFaTx;r(DsU7OCOO#ao9tEmB>ZyYS1WG$*5ptflI*_eg zAf}X;BDfLd%f6&)zfgu*hXMW+Q?kNP|5SSnMSzThUYhpnpwmMg_>{&HY8Gal9~1m? z-mZ`afX@;tk-(0?*zbl2v3>zvX?4drx^2L-{BeF~z_6ty*}a>WQ3izhLA5MVP&S=A z$M0_Uu8L>8>?moE;jQgu3DM|a2~MThwx_>J>E{GwGoXmr&;i=26NFh`+$d21j0zZL zZBWSYM-PlN8F?&Mm9};uQ~euHM^MuF>U~QcQEhPYQJMEW9YI%UH7YcTrP$22Dp>$h zvDy^kOy1a=e)kpeR4$ProOIZkYC%Ywb8O)4cVGscDCkBK9wn)ueq_4(%*~+^!C2N& z#0G)9+t-myO+d10|V04jmrGM<*r-}@8jc>;vx03>9e0Z%+in( zKgVvR`-G{|WN~ZQeony1GG`kIa4W87J`hll3>F3&B>+{Y$8f%!2@YuM^N4Bd?VnPY z>phXz!=ZNxox$bw$_u4cUqXr~=>J1H`o{yCv3x<@#|kXMpQ<%i+A~O3Iqr#Ia_P}A z^cPC7ldLlOB%j3IbvDBA5;#=V4|w1U2vghdEH`1nW?~o(h>qSycr5MiugUz|@UEVD z1~FD9mt_F50}OMoOGUVlmJpxO&+e(J{3iPwc(0XO8BnF#@2eBlo5YDHzeoGo<`PL| zMy77yNiLo_VhI!hxJv$CT&1y+7KvakXWOVLJa!QQc8$U}bK!Y7(`bAKtB#1~n30`JK$l{1MykkRT_Dx zrl!B&0no(8Un42Cawr#xF1hX7HSd5&-s+35aV)kTmW^?stx+;NDoO~M)VKF$4dJRk z2LLJ}n|8T#5Y&uCde%8_B#@vpsCsw~7@L52sHot(=M_ItG&xA%GVjypm(~2*+1&oV zc1h+P`PHOMw;s*aHW8?w%*NajgllWyBCHK$qQXzC5qpI|w+ZW-)J} z@;|aB02l&P(!8A3?Fm&MBYkv*~IS*Iu{Ok@G%r=%MP?dH#oVb#%z% z`@6!41;N96l>{=Nlt1QS6$>BYQfYKEpuHGo`n@!2Wihd#vGT3~^qhf(^u(0hq}`yJrhZ{!C(? z=iMdBt5+IEy+xAGq^M+gT{o#@1jr`2P*=1Dah2ok`>>@JLO8Bc*@ALLLYYae6x9sX zPp;0N{t?vPm{l1y8j${V?;v;kdVp{#|7W2Q0ipj@XS30`o{b#*KR%_b0H@^}sd&)V z)inLYXJIK^W>t)*yZt(bpst8S*XupX29`zNTP`CN{o@soSmnGa>@OCty|vKP)YOSv z+dSmkJv{HbcYY#a=8Uy5Za&w`SIoJ94K#Ob)tHP0{ZsPh3VN!BqaCA0C|VXFk)=(RSy02WkjQ z+6Gns?qroWc#E__{Mt`p$99SfG4qNv;&nMc3Mls{@e#Y-y+_p@k+XGBhw}q%T2nVG zBN4aWl4_xi4awqP;)^Ruc*Zyb7wSY~j3vXWQJHh@5tt-9?zJ@9C$sNg;| zk)RfPr6i;0WM?hE1LoR~pJAlV*e(8ud-j5f1ea3SHz1xNB_+M7le5@ugH3;Km9NI* zu1@oZ{23J}Ctwokk)4?yJ$Xbzk~iJbC@;LmSpJrb#+3hDCoEm(H^i4NXVmB376tTv?w>zI5!V-W=M# zLZ_G0sip1+G@*@1IK{H-7jbo^>7WkvYU^1Z9y~@lNQa!K0mgA%;3q*$RfPX)T73Nx&Uj>$`ADAd&tW2#0j|c#LiEK<`Lt+NSsOlsB<>K3n~cVM3qo zJrg)Sz~XMNQeSg=4DgN>z3nvZeQGNal9qlZI!AhTXcDe?bWrIzWFpD{UlfA-guSnA z^Y{5Dg+DOxaiT>2X&UP&nrn2NXV%E)w1gT zt;5oPdznGYxVj?&zA@@84`tEzhaA=X?ujH`YlT#fKSXptA(V-;<^K8 zgq-Zw@zNQSEu1IFuAU%vAw!j;2$l*AZUp&AM6s&sr{*%h+7I-`MFS9)Uh?u_DWUNL zKb!U+buWmy(e03M>*3qc>JP(O3g1Cu2=dx5+=x&%twyg_23&(vo=l|t?>OoH9cN@K z*~jchg%zbl4?P(mB}tfnqkVr%NO7`G)1b<U}lzMqcp&`zr>L3e(1p2fI1T+8(+1kPC5;0+u~a}ZzRE=t6mUvMFVK#%}++< zZ*=|u?j8L79N!2Q^1c@RhWp;D3FqD$KUkdxAh75xeTm3oSlv%!>A(&dNQI(nlnh2A zq*BQfs(4XbazJzYXSebx zNUCu5XuSEof^W^H=iC#JZCHMz{W{&>azTeKsYQbbfyxHGAhdUUH%A7P$dzkB|l1yE*KNWVhmc#AODwDTQh=L1i=hm5FD%Jr|KOcF}%{q+VmKW9R3SMcRb zvo-#<2Y-e%=p}A4F@avN>}Q>H%TiqOwDwk)apf$B{h$yUe}?P?Ww`f~o9pW+#>Okw ze*cx?O^RyRtf;%YS*mj*UflJr*dC9Vy1P@{+4%}6zf zA~(I$Lxm!MV7uBCsnMj5h!UP0;+>5M@`S25k^d)cn=HqiU96#_V_ZyCWJ`7G;)Tl8 zOZ)fDtpPfRpOpy+*9yUY^CsQ6&kv%kN$`h?6qj8`%)0BDvXR+y_Q!~f_~nM)A-+=@ zSP8Fyedrr?L={LabFs+ zFAtO+<=#(|-yYnQio1-9BnS7l&P&7cV77@sy;CM@rqlsc2T|dc^vLE96@+cO=t}C2 zQGtunvz6h%pOm3aP03%BE7ycDxCmijAf@L6_ghaBN=*yaAi)o#0770r;yt-N59gJx5n=N`#y9o%V`GRAvbGKI!yX zdb50$M`5c40*rc>6Fdsb)D;WX%J7!pqm@ojdQp`jIoLo>0a}odWtEAC#%d(!p0GqI z#w7ztHKiPCV71U%rPzT6m-(_%&e?d2j`wG6H_X`R`#*pwpMm-JrIpTM2w#=R{z6kG zT33lvAbyn)%TC+CE^bGbe)Mp;k6>?);U~EMhX*G4*8K_7szed5)gE_qF!l3&n?CQw zr$&5p%_&>nxMHkM*JJaV?jC?){tr3QtyhYX0-SK~{X>p!20A=J(Kh zA;FlU1flg2DDYvVN*Kdw`TTJ57_uN++)E=|avIPzZE=aBMl zWa$2E19}y@$j@(-Ld^wygbz_!i`W{}<<{NVl{5{d^8!W051eX^;=dJv{=-kW>i=Lm z*AT8xj3Ydrle4A!Vo)glH%w>LCj-TISR7F%=dZr~uC@xl|JfK|fKK`Di<3)|muah! zF)KqJ^uuE|>;twLTY|ZA)jpG163}Lny0~`!+xvaiGO3<+Zju)`tb}WQ)?rxVLSpG5 z2Z9m@5R?G*(|dR~p9eg)B;i#UgbHxgW;32Fea#$>e7yW$4?c6$JdSeIE${nFp^!t* zWAllj=4}BkjTFr4Km18l8e?zIBL9tFT8y)Gr=}|Yr6b;dcz2El1*A~`>9}d8Y^EcP z8YlFfIhL|fh>zv5xxQjZjBMuOh$k93U;(?={~O@)mz1(;od!pqot@9m0R4#Ou$^m@ zJq%|zw@mwn?ZfR;_i(H{_J9ievAae2+fsc}ausEzre4OEED&n4w!k|m`BA(j217CA zrY;M3J(M%pFutuwC`qnKVmn9n6~nstm1b?vE$9NIR!Q}e4i9qCOdl0g)Q>h*kaD%) zPZ+_|AA;aHIZHk@^UhwcgbXQYq{lVr+MS%Yp(Yczw$B}ExXGs#{O{SBbE}5J>~-lF zaz1pYCncp+PD%%_TO67EiHxi1*lb9IatBWXMTpgwMtEE_91@hyvw~%CXvE*b1$(ud z8eG1eE*uJ~QOi3f!Ajo}nphsmh?G%YXD)SFTYHW6IxLNq6|$_&dO8!Td=LKx)QEUQ zM81`sw2NBJw9@Z_(2p25x56+Ud4IJV?^edO<9Y?8cG>ci_>}P<;W(#8qCBj)#lJVX zvL=5%)pPmo827#e-_j{FLTij{znXISxWrP1h4s_B*OL@_GaD-9x3QB%(;@akBPuEx ziq*Hd3*zxsG#^)lQz$2}O^{i9Xu@86B;Gkq+oo5J|LcE>J5GIa{nTdYLt{WG zxf1JNsfxmPm|K=UDP_b;UzO3zRZ~E?_zFy2JdBu18bdrBzx5_#F z8WqZ}j&ux%tNa@fI&v?V*dG>=1iYIs#C9|HWm=+}bQcL?7JbfQ{8g{@#f`AYOz5f&$zb zoxp2D1F8s^;5LvLCfdO=f?6$)orzbo^)7^j^a^-kwB!73UHio&_xFsC-bk^T7HQxI z3!1zDGovqXfRktTgCcO4@#U2D@H~6fXT7n~OvZf+-p~cm=oU-+H(81ARK?&QT#oa} z70V|e^3_v|3=2BCHiP!0X>0aHdKRUjV+E}B;^*qds!ztr*wXkeZcC7LOZmTdJYAfv zh&{AnjaXv`r|>b59y?t5m`Y%DWq=MjpK2__AeiEDh-m%;6IS&Y00N*dyAf(2s19g6 zolpNoAdJXw5V|LOtHOJAl@SprSmQV4?42`NB;omoqFx9qTn;qYbG0SXw9VIl-QS@e zj$cYj2_?kEbsUEF)bGF<)8>ek$a(PDQ1LtNdSyrikj??NJ5Tszk{$ITbNX0T>eDYB zHf8~PWOI}6rK17~@TkJ%0c;13L`Luq8iFL2Yx3Q{Ct@^TFCS7p7IEhw;<20^S{?Xf zDljcQAtjL*jX?Sq3BF0oOAokBrw^a}R ze|=CefA)&W_WTY34 zL4tkw9bGg@t8I04Jwh)Y+KE)RIk^Ai{Fo(%cB{M%seZiZ^C1uG>sKEfLz~FM#zImC z&6Lf_Z@lQKe2OUN0;g4Lpj;sKHPO2 z;=0IxF+b^}{fFAjashJq;up?BgN9^fZxvpynR1bFB+b8d3nal9kQ!6}Oq~$wAWBUKtNyr$zPWZezS(r) z_k2Fz7Yh6{gI{w?qQSc83nfV?g{=|h8zr%iHy>zC9##~NklC_gqXxGNsU)3nFXl%| zSqiej_Nv$G($)LR9ao-81P8Brq@W&SyP%l0E(a z?t)#=(oS6v{y>6S469xH+cm=AL_BXZO4F7dncgjWlFBuvWEu4*CCpe6iOV%)W$`63 zK3m?hIK4KC(F;x?mD1%6osquCSns4gyj*CqF&!p)o>+=7u#fy<82Xn<^`i1;AxKWm z6B=mivSPS;2$YnSUlx{gy|?GG{O~}fGKhB063@ssCJabukQ(f#K|CpM5NUtgb7dOc zzIT+qLzHI7aVI2bTilUhl7WA(-b@fkJt@Gvnf*n>{gk1o0$`N@oyBWgBjN1+qaFCO0e@Se8Q=ro?Xu_23p#}zGZ zq@>~GRDO#+UHT&Dv4VGIIc9yYn$&T$^iWPtrskkn*(Kd58}}#OV0I09(*CxH?CpJ3 z)_=1ATM4Nq9&RvjjoR0LP<>|U`~M_eyQ?dD$TO9dqwpWy;qA|ZV0xf7!?Z8Yv&49e z=a*ZnR-n!KrmXw$IpUb~Wd&-eYJWKsgtbVzzM-E9Ljf{u!s|--a)GspI|AX&}>MdeFR8+3_8K z_``3=53sN3bZ=&^)!@lw+#8;;EZ7tNJZn7=p#-38&&11E8sr#tQH((S-6szA8|(=q zW_aSjFspZ;Z^?Ass`c?eGuc5?a_eT=3-QH$rDj-Q3+FhX(jOuaAUA;+ls`q(Bqua6 zEXetw2s5wmd$#c5LFj_WP3!Z@3g;A8RFA|{hvfX`XC~q=PXPoe(nO=gc+iq<1E^~A zDYZn&+RZ^^T3VQHk(OAgGM_Ob;~f>iD>8Tm_^ZTxzDFE{Q1sR(!!J4u=M(`*OhLCU z87#O}wdQ$%?*AoeQ+FmL0q%Bal=J$RL?n>fcRZETyRBX@x?|;IlD(Yy-gNKnS!;VN zEcj<_0Kl~X2j``Su~oYKBr-Ys^C+s*IZ+)sni{1y;+2I?gKK3!g>Dz2WX}T7BI7!$ zeygr_3NyFRZk+{EC+DSk&Ha5OXqJ1R?OH5A!Rs57O1(xW!b39?A)MUIJxSo%Sd_tZ z4zHEpZ}J&wgt_iw&v^6sNPRm{&pZU46;hr%A_nBY&-c>K$li<3>}C5OGB4B4C}6Rk zGJzyxJ%l{yGDi{Wcm&JnPr2UX!2Yr3=9#G^mo37GqHZ#HbF-_s9% zqk^MoY+GY6=G@HWcm4A|cHL;|4u5R2p(anyQ}^l@rg6tF^`Na=gK?zaVsB_Eg(cfk zc?;(2Q1$ioKhD)v>S@OLKdJj_v}KFNV)|ZMR7z@2vTg5~MuVY5+&|_%XR`$0eVmSN zc77b9`=g@4Ihj0aOOUO}7%PD>m5!h+ij}8^nX8&cB?Z*6WkzgDK8%Xa#Hw8=6nE{EGs{ z+r_}Z_$CCsKcNTvNcB6y2Nk>(X6EbzW2lOp zO*iU4oDLy@%;giu?ac+lp2~kSUg@~hJJhQm&hW_#_nzJYvbYrCPnyvN--r!_NZFH* zML$roqoSbLTD<_{%cG!XkL`%K=8Km?WA}@BPWL@aEWPEe)6B-&<|3R^D%Y$%pCUxh zv`>h{=Mb|RSzr9eSWATZZ<4^67~qc?^I?q^VexPu0UTQjvr!SjXsAf|MWFZ`jT8Amf# znI>B!Q*L+s_3rL3MG)iYE2IO5i?jt^g$4PRQiR5zxYMZ|n5!oLvgNFQj)XrPSD7xp(+WPPY3yN6px=AE zO*NKy{~#Gr6hYw0kyS=ZHL9YFM@)jQh{^zOv|6$=pynI0>o+x}@!;D+d(H6fh1p}aRH5K1Ay>V*Uw#Qq7G&oIy5Sd}J=YqmD`3vE+8Km}thOp8cd3 zcsSKjyv=t60)06VF;xl>aR#bAY~S|u9p^#`zZu3Z6+-@afbFQG0aRSgDvMX!%@qng zX=peqR2VAu=ATfcrENm(87by#eZt>Y5do4C)s=iy7;!nsawoPE0y}!IL>|{4 zaSC|EJINwIfoo2HZszqrw6*kW(6AMYrs`;5P&&jk`C%Hm??>sYyY$W9F%b@`k*QT` ziqCDS;{&$OuMzP)Nq!Y=B}42=S%LcVa%cn|t9V~7FG-2Uvm~*Xtm<)W26B~Z9FJ%k zaWGqfb8?Ag3xau2;G1vTS8**ncrNe?pzCw(i~<{o64{U#EygQa%3 z`h?KfR@m_R{r%zH!N>7<({X|?R_c|^vzSE9#=4%Nb=1_bd^%ZvoxTnq$U(yb!QPDH zuN!UQKBe?CGIdyI(W|M$*1@Q;(J_U;Zgd%b&`4;Y*veW;Aw$yMO|Spt!EMh79L

xqo?w3DlN6!_qw#HiY181nm>q#U@mnY&IM#Z zDxJ8##IIS^(8j|7LfbfA>#Xd#?n6hCMJ-{U0Td-`iNM}bBB+JA8Un8z71i?9*C&%! zYi`a~Rpf+6nt@?+R)@u*ALNlK2}u0lo_h?<5(bo;h~Xw@L+8h5?G>W|UvCuuoQ|o6 zxYnXmEHnmNWwK8L?IN~`YB&Y&`A#vf{RLY}N*cRg`dE{Q$8-(;(#5{mhG`9Miq;@* zZ#;m(sX96+)eTN294>9{iury_ulc-nzDT_|(g`5$#OpPY-miCoaszz6A)}}an2+>Q zid(SwLE?*aeW%k}=c-jcJ}3Vjia#o~c-x4{sL^cgAD~R2fdSnYsR@37*gMx- zbHRmzZ!4!?FIzQgQ+{$i=b`G7o9b|DIi~U_aCn}Br4!IawriXo6nRL8QVy;hi=b4e zDw#N0lbEOjjCY#$#1Ecgt%sR&#u)i4Kx2J4cjg))zPOE$lvZCvvT6gPKTDf`gMfZM zwBB0_;1Th0F5hh8(=Mh?bq{v4kt2&xW5BcSe-u#Gh@E0*@6j(zD;1Zf+hJac?$5ry zO^(YQZG5!t@R4@YW!Oo3@etG#_a`|uYlL&zhcSahpT%#-%U53 zN*S7Kl;Dp)duIh_!qj$YGHAr2#fjOp%dfv!Ieqed(RJ03CE>*VMCB>_Jm$nab;l*` z&yr1_`^|=rC_lKZ3bM>X;vU#-1g?Ct2x(;J2fcXyMy}4ou8iFFHB>0uLK-mflj@v- zN0CnNur&WX@pxa3pCM9&$9!p#-jX|7^l05_3y2WJ<3T{Hq2`bC2ht*D2>sYhEZ+av zQ-DytSi7ZwME+?(p2<5P81ROC-^$A#dngjV0`8HP(V&x0%vx97Jgs{#mErAIU{soo zM{9m}ap|z2s8Rmwa4N-tEN*3^L7>#J9jAS7r9p4+35*C6N7VKgmwl=*PO+nlw9TJY zwxN;czHJoX4@m@&xb^}U)%>Qv!#EU&m#6Aj=)7+ZU_JGsAFpgO69P3E(y=VjiB5+-uTCK2I#lM{M#SJFIJC0Beg}$ODa#9=G#8{SN_# z<F+nwSGD`TdlB?2(~Ly zgUYp`z|Bu+uAAL(0uEUf%mw5!U5Ivh;4@UQkX!1Go=Y+fs2-BHshTt>J?ryz zKNxi?UW_0?YYOGv5tyh@%x*%H)rpN>lz$RN@jn;6Y~-@Gw`G^Lkp(@Zxt$XeE|<`AkWmst4Ou_&p|9eF;t7U@~d0r zvOta4o??Qsp^-e!%HsF6npigfi=(rm68F(i*Bpic3ZbBM3N1YD+1`U5D=$$l=u2)K zIVp@>E${)LaP8%+>1%K~uq~&xX_zy)F~k-tA!o)7A|jI41A9(Nn3kYBxqxvW@%24D zr6XZn9LTyWSw=nL!L~|Z+<%7=6oih@W^MP(E5k=R`7M}(lmBZDa_)tZ_35Rm?|+nx zC3kQ!}7Bz7P@1#W4{R znkEz~J(xrt7#k0zsw@ygar43*-_a*au7Rz2zT>JnmW z&jB}Wv&aS(y@^@>U??##GFUXr9VdGD=HKN}briZ)AM&n4O;w9BFrES1m)+i-5ySFQ z?p-%{J&upV&$AwNgeKw?i_gC;jsELEivXi*XV4RGo%nd@fm+dD8C|;fF@ZxC zOky0)xB>)DfWDz^sfxuv!?`j8dV@RQ+qh~UcI~jI111Ckn z>IXF2M=DDfJ%;ibx#2m73odta8dAz)ScD2Hba`WVw99?En|C&-yYn7cPw&zccd9#p zpDu80eIWHGie@(cv`kt#Jo$W$fR%xSX9X!9MKu0N-zRo zSNS+b`bqz12z`xWRn|Y=#6WHh+v6{DMFeid7*2!UXhk=ize6B&@5uc%y(FRe^-{%4KZ@c&b>MZ#c@-~2M7-ZG%8npA%DQO|8DQ6f%zp)OrGXDl=iE4a>MG! z@=C>&)3g=$Z&z%2QvZ2H~GPM=5r4#SU)L^q$;lw0vQJ4%1*0Vr77ewa((TLb|8| z|EA?t)EyaX`n)yf*!1Lcsg<}={yO17p})WCSBE)gdRh_AGmku7dsqZnqe-?jAowkJhg~1yv&P3okRAm z@E{3>AZFd7mtenA2XYj2Qc@pCtr(~Yctc=RQV;$+$C?(K_H6VOqH9s#>2elVk470+ zRocD|Jv5~~M@``})xfUBcyaqi_Th_8dT_*5P?4)0t8Zz1dn0FnCxHn~ZeU~RzHcj- zDaDcZ&Qn0F8B9hporKM|X>PV0w1!>O-!LoE!B7Sh{l}Po-)C52&oNt5ggNmhb zd^-fW@OSn&@ce>S0S7WrzobvBzyE|V_M{B=D!xuerkxyU{M6lg}eMH^M2$pbY&6F?(Jb}F-7~Gt|OMwbmK^Z);tSwX26!_~v z~QK0XpOFWe$#dAe_g%|s6vvTMW z<}z~8a=8{Vl4S80Ba!upG&QZ@YBYrEk0c&P-WEmc8P7{3wXSK@?;3Ywa6lNki-rRIJZU0oU@wZ^8>y zq?afO%waL{Dpn=D>^iA!HfCMFw7^ zxCjo)rc)pIR6cI8`7rkpOrj>O&o8B&F`WyMO-)TpfE|?i zbQyADV&dj#4z52gWf-xJGrX*?s+KW_=LCr_DTd-u`OZg zQ^FsMt)^tN9IhOVlV7i|nz}VOJ()&abKXJaH`FRYW;&d!+W#g`b!e-?5&Lz51CsYQ zc`revq3y2?Mj@Z}&?O_}vhjlZeV!2omAaf5ty5L3=CekiApIUs|4I3ldHd*>P;{xs zoomPwfeDsCF@v$^`3at`0@(%zo`1-MztE#qYCiYtRD(>L~k*fS;zy3iQSL-E327kSS%p}%v9blxC)(YWA<1gsW+^(Atpa*H(T&m*Ln z!(Y!2CiCDDT2X{_?w^Wj!bnU>?+)kV-qbfZvODh2c6)i8KL(-Qq<5I-Jeb2sH#q6R zz$#Du3FGsj&0-h<1vZB(BKJPGc)K?bM(tTiBEUj+I9mDpYXDEesBtq}C4+ z^uT+4Ydd1L>dW#;PiRQ8!2cx`ir-I>yVKFj?VaMI%Vooeb_Qx*X8-Y%H02;=8C#tF z_8Ix~&iYzAsOP=A(W^vxhNBqh3?~kFoOaUz&yGYYlsOIt1_pz6yG*D-0aMFlnu?9a zy%IjsGS&KoOCRLMOL60U@WJP5F9Vhmvq`q~_mnJz%l!;Aki%~VS1@CQ$1Dq>v$I-1 zY2(23K|Sm~Jgf4CgpvC^oB1XL7k^={HEVD}<^OB}Z*V6V3}%qQ8Y!^!rrEOKh8vN@ zs^BDn#La_tweQ^sRg!gpiiH6jG?x&gHJfa1?x&MLrK0hR*VJ+B zjhEk!@HWixB(!F{Dv+PqtVVAnGG()B_}M8cNULaNm48R0XtPc-*)yH`JGvdR!Nt%3 z1>BDosILMlv#lsQrgl2{p8L+TwI1T0Jht{m1}zi;&xOzJ;kZ!D{mMPZ0WxZ|AkyaB z#%UEWCW;-tjp=8P+7`Fd`lsE@Hwwgi3rU?ficakb)Mw_RuUEvd6puUBN_i35G|H|e z>DuUF=M~cwToO*+kn7*3xeLztQN#-fFA;L%g%FQ?!X@yYY&^fQM}jiuBv@A0mkwdu z&m@1OXgd^ScdT4m9hd!m6M|#5wS^dYC*eu&*QPbReTs*U+?S3;eY(>m%$r}+>_GiEN zPZ0A3Y_RH@93=!dY&z1D*eAuO%5i>XH8hmvHzbXaJB}8EP90nEv2R1&SFdH;=tC-V8<0DaAiQZje0*qxiFbf3 z`8)e8wDn7EqYPTH(f3T%tv3r_5#8Ots^n9h5K=c6uL*s8KY!OqR<&Pba0xYMRi_DD z+G}FcLWU*~>EY~8r_^>8jw)ycOj*INcQr=1GnN!rF# z4?cOq+9#~yYXh>xL#cu&d-K|dS537cug21gKj$iXq6O&e5s~G+kW=`%L0|B`8pm#9 zp!Ivd2o=ZB&mf_logJt{k8^=;Qy5>3Q2iMpTIQ>4_9yyp()p251drmNsUH^WA9Z;g z3+H4<%aD$1@LjWwO-v-MU4JYnk{pbgN5gd*xUQHqdbE~Z6XAq2qBr_tf+TSGjYEVYQ~a|AmeWjbkD3uX3_AHu?Pyr>`nbQ3vltR zt_;aacpNeF`f=5*u<2>8%18JhB5EN5Dr{_oyw@?tsS;i?hDfKsxs&;`$#*6^ExD{h zo`NHzN$CTvUBD-+Kd&-`lDRJ6iaboP-Qd^`9$tWBWfPX0`S0?hExMwr#*NcXA4u8? z=8DWNGPKHk!F%E2&c9mMy))Bjk|YpnGD3$%&Vghg{mOPA!OZNds|A#a9%wQDDZi=DW-&T4^DBmM|oV)?PB8mV^R z&G$b@4n<~k@NEtTOxIH3MklEY`^P&%=Zp~yyb)Roc<7$kdxTTwaAR5pHtr%%2~VW$ zeiz^_d~70LiUf1M;prjx`@L5f+pSYH$G!M4$mRccM}9qLFk|3OmiA(|)Z}3^;D$ud zh96S-qw-e-XKudG^-mB4at-ahXI|w^Ihx({*y#Ki_wB@vx{9X z%LBGeWQ0HzY@f~bpn|mWDrMPs!aA;JB<6Ec0L-QOVR|=5umZz@z|R;apC!FZ`(g-50xH}-(4}V(E*1J5qHy0b>UQFQk3=Y z_-m;rr=M+oFJ3`+=uTU_16U8*^GW+&5A$Na##wYtBqm8na7@Xf9KZ6*FgDxd} z!Lv|FIiX{EC|4p=8TFm}b8mug)D={c+BVFn-q)l^IyyHN8_uIz@Ex-ppJiW_Rslez z{*Fv?WnO1i6ZLvJ5IBR)-HqVeL_`*=hf%6VQ%K&sGabh%^UQAP;AP(iD5;( zy<02a3q(6Bz&jcc#iCKUKJH~d+RO}JE)vM0g=V0BOCfr?#1bFePP04Hg!$*r2(j^U z854jkX^}KS$)ASbY1d`X>Ey|VU?sNbt{gNFe$ER*3$YVyUhG4^#*pl~+he~yT;tih zZEqLUEz9J4jb;3Ma@t}B0S2K{!@YAVfgUVyyry9W)6e3{gan3BQfH=&+3@cH}e z&x@k?bi%Am^lkA+&1Iykk5s8?XJ+tS{;)0MMe+Fs`kIGxDS|fXru2Q2LrV_d;BRAte1KR9TX^qs>?e`|f zU+~Qb!7-(ecZh>VGfzpO#ui7k9mHj(q%eK^1}B)^1=WI({USNfktpV`dqI z*Hi^gWwO_*#s;~yZ@ku{lzowc6n->RP~*5f((gN{dEp0w`_eeK9a2%Ohk;W49iJ#L3}}-IZ&)R%m2-!uP+iEJ-zE!Cl*{Lc6QvWt1AV@Lh6*1UMeX8 zPlsR$?|4brDsddmALWdoCJ=B4=m?mJVbMUzxr{2_$*Qe$Ycjo@?fT69Dot5o`}hmh z*)SId4oV}IvV}(77t7{9?e2umjabQjy&@lckg*mvLP8Wvo#!E$7`R6|5yxT5tfFsV zEYbWhd8Sz>tQO@|C`R{?znCqkCe6K#oCB>jRvqg>E)+1YZg5535Usg~fX%HDF>NS+ z!wWKrV}M3neEMzlqtgAP{>yGe1qJGaTY{4Xmd29I4(9^wptc{kgAIXE$#S9?^xvUd z=xsquJI~rj2U*TFpW-SXI-kX619x!_CJZeUXqPU5_LDU7xA2L@Oif-q^}X2r2=z9M zlBi=&D}%S)N=WveXMJl5;-F0Jnkh5)uQsjzb_bHymZ8-LQw~44l=Z+u5*1kF_3S^ z!ewH0jkU;96w6b`Xm@1XC2=5DJ2oYS9F0w@=BuJCRMB^$3jR8hb0cOO<>^akB%0jz zgqml{AGf)7`JvbtF$%pOUPB~-N^@^el@zeNH7;A8NEP&U`xRwDj^R|$We}j7amN=6 zo}CP4B2Jx$4#3Xow+ zm`-Ay$3u^GXFV=NNPhjCS8RVVB8IWy2moqzR54lpG1=}{U(3hHH8 z-1EsRvH7LiKlDL17;o(PL>m!|Sw-uKPm>A%$p<3hG&=fXX+mWjUeaOe(WyNB{5_to z3X*-gX(ChkN~*cYf=s>N^jEOFuKsGxG?85G@-okt^?~*UBDwyR<-f^L(S9i?s?K}R ze>*_&)Y-p{&&)q5>lMXH)d~M`O~2{x4vD*aR{2qlIq*5DZ&wx`h63*U)Xxz91{}3B zhoP%L>L}+p)o*Xd-CcCVzz;Jm(Aprp)>LVp_mWsLWNqjdl!N?V)_UW;#HVV}U=dCC zc5Y6mCw!v=x};H?W+UP>=byvFjV0gajq~R|H|@HU++?LIkJ zYUA(IzIvogyOPk_IG`Sqzkk8fPV+w0-FmNDCMd`_+gp^n!UqMrj4@A62@>gZ!@H|z zoIp6Is-FH6sZ_^@DsiYQzVz%34~z2^8VWW=j~9ucu76>^m*;>Uyld0ep~Gp{g2qvL zO9IC(!3o21L$2A77%d)cmNCyyn$W&?$#6f*Xmb)jhJ<~tKck_>>cd1Q9+ zXx+Y|p66r(8&bXT$~MIeIXM4~Y2>N=8B*e7nX%vATd`B5aUj?xZu$Lu=8-s^60eN{ zgU~C8)M(00)r$wqOw|p)F!lx~{#&x`uj4LpNLey6zD{wt6-cl*-NNymS+Uj`Z#27y zs1XzLtig3$E~&0|9QLM$0#5i|_#~v>SsH`N9Z<{j;2x#7YN1q3=f3tBp}77co>=4K z;}9N8a({&elBLn2i|uTU(j%u2f36w0t>*jseAXTMFO!E(CX{r9itR-9#3uHe5?o68 z$dxoc?N5u8taqD6yKq&H>Mx;fZ3*53?;~?YW}hac5SIKU6&a+!e35CNtCMs+WreA} z_WUQExbsVosl39JrQa60W7<(d4CxB8Er`0axqraDGtW}{P&t7UMW?Q$-v9E61IuXI zMdw%j6%C(Ity?LQ#s;mMSLo>IORN9!Now&Df)dZ6@5yoZtu2-ZjMYP%^GW9QQ&9R? zinul(=rtdR#*t;P=?W?GlA7{@%zs2d3~U*16;|JHSdML^?=7s?@ySO$_0?E?rv&l; zY+Auj&TE6C&p9f%e?OQ46MbG6q;H9wAuZlCk9P2QMXfkCT+|m)XdzRp+{1pnp0PUaWC0}@#w|Twv!muTU zF_OTgFsNtA9*54|g0Q)VE2%$=MsRAc@#1iJ)l!k!4eUsJverQ6@lDnVCoar6Mjj5N zS{woP&=j3K*0L{JcS|J|pKI9~;-v+)!~4nu(JHWD5ER9$wbMZ|%p+EfWv#{S`o60? zF4^%OO>6{$WsA4QC5GA&bY>Ph)b<$22zT$VI2lhpuB0XL0(~GJRB7z3k9TxP28V9s znRQ%WJxRN1(#ZV4e55nRV@eJ1L2FowT2$V-X4seu(G@ZpCih*@Z<^YkaVw(u^>Hwo z{=fN2O&#%?7?xYpqPB?V^Bkns#~xqYq%S(7Rf;;iIz@~`L$n!=OICM8O77aXYM?^3 zJN{a#KB!Qw4#lQQYst zf`+Ic=AC+ZX&@hXQQLm_*Hadz#ApyVTb=hBmlCmOex zzzGm1duigC{Tm4^7h5a@7|k5#)&QM)aUBmO$h`)9>@1H$?D)a+Z%mDo6xx1b@9}{Q zXuQ~)abIns;8 z#PEelYaExRQka46R0)SPCx5m*1;s+NXF0-T&{{0+5^Jp=Jzd|fub~KP2_-Htd~6Tb z)7vWngDpR@@=cFidAJT9-%T9{UL9aFHppQ(V9cH>+enA|4d?ifw}woU!}5W zHc>qk-6C^LJZG^USrCr1Qlx4bBCU~hF|Bf)iolz2^#Es>$Biy#?(Mp&el z!+1^V@L=p=0~o4t0r^HnH|Q~E8q+kOrpEs{T2@y`x(pv&XlEJu_QSQ!zbg0Dz1{dl zSDl7`pBgT&G5q_P?X{D#)=^nd9WC9?K!*^vVjoMH?U^dx^#Q~^t?5eb9x5!2iLJgL1ML2 zS(=MGwEo{3F|Pa!(XcU%aXQSiai17D6LY`RqS~2g^x4aQ-6u3I;@ zZQHh;#%OFOZDX^sZQDj;G`7{)PGf7`ec$gp*1!I(wVRD>+|PwM$2iBlGRtY{Vv(`J z{CbqwD>%kqKED_+VgTEb(AEK`pICy2F*{6q(j(hZ|9y#1h`EdmJ#0oUf*@OWFqKtuI_yfTmE z3xS4HA6>=`GA_!*$OH!sCpi_>?vi2%8ADy=dK<|CWV~7wpMYo1g0Nq6_nG*I1_aSwj3b8Y%o3wCgZRkX?#59FJr_i%=d(||dMgL(7u3y>+8h9J(iU(W`IvP1+0c{PX;w>{Wv!2XtZiUc6z{ zL{%Km2S$1LR!+e7`8E?6cCi4`oOAGq-Xi6?eqjlc_&w5_{4oD9W_z1R%rc7A_kBb| z6JW=cc4|UPDD(KQ6sFFzKW~pb6h@Mt0;?p&ViJ1D2Y@gFFFxZ?=mzckVxm6@lHkb#oML zmLd3JHJx#6pAdmdaSAK!6!4R##2efAuR3(~R3rTJjj1y-w&~)CIeB5Xjq?8Z;?QTN zwBx2O5KFE?>X8^|s;KxI_&h;;buej5ujG4IaG!RnJ#zajo8degR)Q~QOHXhJjDFqN zl>qklR|A|`8cv3z7-{>Y5kn4M=I7t&2-KKO{ou(~qIHi$lIV&5^!hgH;K0)HZ~TJ` zG}Y6l8{}oU^8zR!EGXIMJ)8xq3v^1!?wCd*pauRgZ)v7<5BT2=MdzP-5#W?gmi`rT z7uCR32+II*fwdEh{73ZXGRL0-=mYzu?Xech4jiZcz>`k4F89otvx4V3G;bV&yy%~8 zZ@7F+IJ5;qe}vq#8mr18AK>vhOMGUB#LC|Q))CFv7)_J|K|gVU{kfc}CiI3N(++6c z+x;p@0*{bQ52lqzyD)r7N7Xmnw`afyx$HyQ&GsxN<7nbC-rdPsFA`g2qNNvhxySLk zTY&U>+D~b@ThvLrZ{=nJoPwiSdux+w02x()Kh=|Q_e1G*7?qFhBN?)HtzJj8 zbl5bDKh1`P@UHfQZDW&@59H^zhpY!dwY0QaT%WVJU((gV3F znmpLcg0Sc5Py~09z3$d_91_1QGINEzqml%sjHEAGP;KwZdjc*KnmO4o`~!F>PVvoH zt{jEFK%*+I-}C$gth6?3Ol8)mYIF+wJtcLJK3(TX5{387Pxmj_IA6NlnjxeGoeyg^ zjd$zsX<+0hcuU{*p)XEbE{O0xd)JX*UD>~5v+;)iO%C!V=&pN|;$e2B?_=PjG#-); z#QoJg44?ZR?UM+{j+2j6ZDUM$}}v`++Y;nZTk ztHJGLCp5>7b$ACH;lQcGh8c~v;$%iX`0mKTZC?h0q#P8b(WsSj&vTaTy0!;|E{CoNwS*j&AC^#eoPjGjS4{KuF zmxmL`&fK9oCM(yKj>wz~WYe1+d*vkoc0j2BV~fLqeIqrG^JCk*i4b8zJ8&!@78T11 zJP6@uS!vl&>#K1fcxrsccP9D4hcwt4MF_wPv)KTDSlnm*N3B=*cO|mJg2zCxP#<2t zRIMTt5bSQ$gamk$G{)mRYz#CG4!AEYE&?i4z+!kqhCM}S-Hj>5vn!mqcx=DX+zue3 zg%mUqbp{|&(a3+5up$?&0|)b@)NV8pGht&yPtL6?!(lC(c8f?|#Sd8esa_ybW}+td zb%f6;^=6#ibn6q(?dC7QAo{KmzztD;@}o4*`#f1qAXz=?_~CrOc}bG=Mw8?I!dVc{ z^>}73wlo8I%fbUXvW+ApEYbb63gbMHUOL_xXe>&_;54^f89?#Jll5*fJtH!<@qmwX z4Md*Pq(^lHy!&(=5n>^vb=OGb;Pa(GWl5TGR+&Cy@s1m`go5C8HUT>RgIhEpEdrhu z)s(od!0C+7L_+wGKQ{l6KNUm5r+9q`vetZAsrYqf)e$x(^rvMKa6pAo#g&8W|yEq9tU(>q_ z$kl~DSfQpEC;Ry-f<=mEciS(Rwj=JAu(9sn!7z{`Ah3B0DGJw6it6%V7pNSOQD`}> zqW8XRzQ2+(>W>dZM^?loFTX?P5a!0dK`;^h%KeqS&m^@xsIx*$2m#83NFeC{NE5T; zXN#1O_b{uG`?y;Yo0%Cnbn%&WwESn4rhbu#n>MYNm_I(RbJdp^4x6d%Q`_rWOCy6d z2geF+T_a^ONrMkM#5ZR+QBmzKJlZ70i3x3R$md!@sfi%aQrXWFvekl5M&#h{ooUic ziqw$41U#=?*%^Y!Wcv&#-xA{`ezv(zT%xi6NBgz#I4Wr?aV^<&$>I1bQqR5sp2kD|YsZ-ff$lwX)?KLD zMglC7amzH`tI=lApo_4E?n4S4Hw*q2WCCRiAWzL3+|LNO-Jhr=JaMw0BBSC*{;`j% zoRFcRgxFVyHwYF7m-g0vWThT3-EEcjx>>a!e_wk0emG{iEr|Q=i;8;DV!;<0@$p(8 z&M}qQAK$j~$(FBlU^u_w2MKltq~X~_Nrq5F=*-F-`5JII;AQ)i6aDGvb0~zf*)^!v zY`MVpFXEMEEP24ruCYqYUkX$W4G$kwb@a#(xc#|!*XOAtTKB$ck}9zJ_FlgTxuKmS zED^uuby}5#&2I(iB4Mz3tX6F`?7vfUfvt3Mw%8T>(i~IFTDjj67cFn}>}bGaKK_hm z5v}OQRHv*`c!&gH`F+u7P)V4funA(V?$yW2C_1oQh0%pwQ&sv+6!)L;bh%I;|<61ASM``%v;A=nY*N|bbOv3?W z-82Q`fm%(CeOy4t4>6I95gp7FN0U(x=IPc7A?Z|=yZ-qbJMuf)O*oyhmTHI}rxy-6 zR?9&wxUbnhbB3Mk6;o zuf*T+u>yQ2ElG5|E&>`JT~q~K-aW`d*~F?A$w+%0QhD&&=gyrSWoShGeRa z=#Y#xO&EZC<6-$vQ+HFR<8QzW_~pQHNeuZ}%w3p+vAfn(pE19ToeA*j!So3~0Y0fn z404i|%tE>(Lti=(k(EKZn7lXHwe09j;a5pNz#M=KlIU(Oz&Ex+)_2>6NVzsc7Mbs8 zjro;XNL$8BE%EaPdRoNx7Gc%?M#%W8*U>7s_613hH$+iTAY_G?qwD!qJF&LR%_%@uV~t|f_=24qZf=53VWnpl(J#=hLmW&#|t z@!~ioSOl3-SirOd=LLU`h@8O(ESn$8cff8z-1w5?hAusj-=@3}{Q#k&QhfnU6G0EAZKU%thrap95OyB*STp_Fahd8OI zem1C$5aEv_OQFa%AHD?GyJxxpY~+A&g%YW6Rk&0Ni_E#Y7y7?kS_2>T3Rfu6k_fC5 z$u%^pe4xagPRflhQzW%Qq=qE0=PpAZL}w}ka^|tZW>8|Gex`Ibxp+aCB~epX1+HzP z$2N69|NJitaBDuI4%nJ56fHG^-9s)p=iiRg#{Qae$#niuESk8ZVCD8tL4Y8Gq-jVH z+*2eCzY;q2dg%Rlzio*ovtS-Ys2$4OqEX+MsidtHv9`k+3hqJ4+DAOn*2xa>nf2aq zG_efc01}0cuRXT#B;D+drQFu2z4|Cq`X5PM7!}*_h8eo$sB~OOe%BnJD69l6>Pg8Ar6*yJQ$B?yOgc+Ootv~7$jt$G@^eM+^#hn2m+(cT$QJ{}@)>b1 z7yM^QMNRM-q)cj2$j6P+@G+96O3>`u2#m=ox%paFn8Pgxw~(Qybi^rER}(5hBe$n` z&b1O&A>^uIFFOk=+410NLL*>lpe}rmnrzSMt{#XS+{7{i7J$q|_XJQ;PmKLzh ziQhuzirupwxcVA6HbAKi16~a{{DGgzH4xrcfGJD*sRFQE5>2wjDtkd+n1mhV$n$&8 zz`m{Eo^OrdKZZMBVl>C}=iPSj2~z)ho)UDW`E&*y0#sULl}G8Ej{-k!&dy5pTh4$c z$gow`4LP7Fk3SbT#Q=CuC{9Kjr)80t2~9XyJQmAkMQWxtFe=3b z!?g*%Sa(Z)c5MPkgF7^zrz=QmbX;9FR)2X%N@uk@*hB)JZ`-+85n75C`FVL8^iZMN z1yard$MOOaF7x{-xp}$Z?oRcKySB#F$O-4XCm9>=*crT_Aq7Z|7dM!VqsENF>Zk!Ok_sCTg4c zE?;Ufa>;hIWCKV?)aqK)kIhG}>4!nRE`1$642Lgsu70&^Y|lAkZJpBfUl$#RhH*w= z*9|dbfjIrgK*$_L0q}-Q8nUPktnud0MPM}C1Cqg{f~51s^X-#oqH$kK92iN|%w=ak z$5-T>)0#>Pc9#89u0?E`c*fLN7V6#usAa8g1aS1tDiJD0jWN*!!axt`E_LWkS|M$a z*ykdjqZDIW6SW-pmfAesMEyUhxh(8Ff$5KkeF8 z?Jg)lA(+g)xqO(c38Gsl~JaIF^{O`ys%fD+Jz zg2{vC-==f$iKKPxAq=7&1MrL^=g9B4;Bb&q-Bd^_N2+jFIE_>go|B|tQlmZvwg zDMyznM(n1=kKv!EO?#f33X+4JPe+pSLw8%O6o|p7LHbpjcVCpF<)Cv|rb2@4vV>A1 zU5)#?P~%CD8HobKt1NGosGFb>;e{U_r89t+hZtuPcp#K$Gg6&8qWAMI3R^xt2ybZr z9#)2@?hi}5!1eO*gM)0V9`M-%_GJN#_n#|Y*9TzW`oJ);p+w;OMBZ=Q#bVEN*1iWX z%9gL3lC+tP)6fRV7MW{44&*1tS^;`&<2$)Z+k+wE(D5-t-pPHkR)aYSOULY)NLQNz z+~yH=`v?*PVXu=1zMx7_y#qzI$1`*^eh0=-y*2aQy0IPC`cX6G|I!BS71o+ zR!#!i)kRo}+)8~=<6@>MZCR9(yMu@UZ;dS{=J;da-5cJY`LfVZ-d~y_Lk;hZB=9DwIXA)=@w{+wTF0i;7?NvTwAdg? z>R|;9eXNg}tGY6Z{U$A=O@J_7a13BE(tHtPD8g1-v_$44#+aSPRFUKi`Y%Z#cCa*> zBH}kPtKN>k!^F9J8O#fgt3umbl4EW-orPrVIvkp8G&f>U6)0UHsVfa`EVkV3*c64p zt(S@PnBl+#Zz~v+ZXhUOWhGM*U$Hm})tn^vcCgCt^*X}y_1T==-+x>xl6#CRc|Smh zT*LKzZSZcixawk#q3x*R=k7)BY`0|GREALrC2CLPg@s0c!N>G+zykRWVr0pr~0( zWkKH-#X!<_vnrIV`6lkyebT1c-~5G_48N!( z4HG*1{0NmkwYo!x<}dqKI|Y3W92cSmIHFk#k;kvQKJBk&cYgerKmO*III-P!$xSIY z*G4__zMHE_<@*C&F?&A21;naVCc~suldM_tUIMvBK#_6b!*w4XQc@bb)#rI-&yo4R z5(x3@n>?BCa`fh+2Y4CSs>w%3IZ!urF%T9`A2+xUD6!L`98vjC?W3as=fkTB8LVu1 zY+RfX2ANP$YK_iI^zQ)vsJKL)S5!SDW2H@UvESV}-@@tp)s>$gXaXVgRb>{syGede z+=r8sw`-{*i6flD)y*$qYOqXAW78@g3agd~+Zk5;qu19~Lb^jNzKj7L?r;G59h>L< zS8%Dpe23eBstzpjw3SNX+V|2fp#!>i3dHJeIeh`~5v2W2UK{-J z^9&u!U|9#&*RQ?Q{1{2viMnrm%`@hoLgYW9%liVbqw5QAR<|FPC!6cYJpX&l{*TT7 z?=c%93?EQZdVd0lsQabHy%0rseptj z`TdEruLLd>_-7Rf8dyAQ5EZ&(CCPmsq{MyETn)n)+N_byZ%MjlY>XBQBoNuxyN4+B z3nDvn`VRBcB^>b;kiPr6+%Ze$_iVrhPgl=Ufy+~hoDZ~2xzw+1`W@HMihSI3$-(xa zvsrTk`|thq?f>I`0zMq?a5rl~ihaTNRNOfCMe0nlvJ+^e1I(0y#(GFp6yiIp{V~m) ztiTwq^MThVMP?exWI!W;HMtp79G5NsNkBxyHBaXReTEs(^IaMFxkXTI1J{#7V=0f6 z4$sJ;4rPmlzx&RRYh2G~Ilr(Rq_Hj;>&L_+b!SmtDf~MsbA2V`<#7>$z2@6UHsjks zF_K~h&}}A$UoPsAhq z25&@tM+`>sbC4~xryzQWf}fd5Vw;+88TwsH_&;P9PEzzw`MAB4L@OlC$U){uoBh$| z%dL4E7PdRm8*Xp7Bx?dSZDLxvXj80`lsc9W5eIcbVonDroNO}DJwS>Xi}mtw02ZC% zy~0b~mFL%sD~zbbfBO@gxc}Xs;DfMysnQPmczba4;+C;8R*P3lf*4M$Te~1aG*hu3X4vlTo)BG^%DK;H{Y47t_*T_%kizg`?O- zHSn++?YFoG1WV4(N6)8f47v#$2cHc*!J;2J3;vc?#%fZ%X1}DvLw|-n_)qKsA~=D1 z6OnU>uUVqiQn zc)23WG#yEV!B-S#$ql%0NgK;WQeDEp#1`r1zpIm|XqAH+mtMAd!)M8RJpFdQ7htka zaOUj){gQxWwWz_v!-K5bVkeRlAHTDb-F^fNyx<=t$U+SM=<$fDS@AJc?3i6L-P*sy z)lK={E*n5cza7<|4JorA5BH4c*opAd81a09x3Gk=O<*%4>H`-y!#=MTd}3lERz_kl zLpmNOv+f!h_*uR=ysV^EmKO;w;0l153zJG%PJzd?mlX%-tq1W3LS#rrOoM!1B{HLC zpkbvelZDa%vW9;dHkMXBXX@7+a;+u=*n>~j(jdd55&gZ*qsptfCMy1ekvJwALVw&+ zXB(th)tRnB9OmURF?1nefEIWmRM>z9wJ)C};hD$VjS9|DSrLcKI84TXycHJ`6M^ZSww@2t=cd6SCD4rha|(z9J3?SkoHjWdiK2q6dJ(Us2$V(|8&%3ESl9o zn#ItH8mV+}A1ir$>~rNx*RXk4N>JC;4^4KO-}jQd{Krv1if5SSv*K>u4+u(^Qkz*) z*7-Yt2;$u{RRB?&ke7r&vyS1sP~8}3H9Gou+>Non9!7H86`6Z-$UsIsA2iP)J(OKu83Wl-V3h(jkS0vX zmwxrSmF$9-WpTItOugvq3EyC`xk=M4qtWGXu!+DAYa{fAzAmNMGm~ngqapYP zzeboL1NKgU5ywE@_RmS4^KT*~V<#)pn6jRWI)OoqO2}R_-z#9c0);RZ4(KEyVXFuA z!Qp^|eS2&AHrQB6Ldzfuc^U72OtDUNy2hh4`ogINbk396w7*X1r;=j0=8e>GB}kZsmW@-FzD&Rmv(e>E^KLz-RmMHPvP#mq(}Fev zV$LK-29g5a16-65{4c7YSE|7w(F*0A$KxApem7`XI5-qEj8Lw_kX7^~5fgGVB!GHI z2qY`A4g5@@^*JUxSaZQtSw+1dVJ8@c#Jm-${Iu~h$^}qQb$o%HUs-PQ$ja+L7%P6z zyEH{cPM^LF%sZE7{bAS`{ck^-`DH{cE1Bf{7AqocKF-iLt@FTc_$G4C+8aSwSTcka zPy;L-SV=Hx8Dy(ZUO`df7UxJzjOIcqCeb;kepdC_RaRCC+gl0j?CjX>4I9B9&4H2D zp}Rv!jPvGS7`cAPq9OP7z_Ax9vU>4ScWCkbI@%WzSw zWe;T5P;GsEP_UQ|NMAzUV_&$MGJ-`^IKJ-*|D1Ew5&(V{K?B2lK@mp}+ zf!guY&V#}%N~BB7dLo8%ku98TH8P|av(MEWICyzsBM8p| za7=FGpJ{3wqV~!u?r?3W6!4i9J1=4;ga}2owQ-|~rh4HTq_&Go7cJr93A~T8y6uJt z=IoAoa+d9CXi85JVC9p)ikS`#P3nnk_V;eL1hp$_(Ug^mLR$`|ah3H2wWxC{bAvj+gRs5VuAhxPvOyr^;erW+L&(&65x zpo?AN0889lYh;jW?@z+~wL)-u@lzsQ*Oe~0;KnT#Bm!>W_;`Wa>-*`rB%@PP^pQ2EajU+T4z$*j`bi7&CEDQD=RThDNjlv1U|msu%2p{7 z^KO8i1aG%?gjF`sgcXAMdeE6`6$d)9YV#rN@l1>_;DL^$&SZA11vaG|LSfy=?jW&u&}<=OpfyNwrDUnZkh4A&&U+$|#Gxe33L!J)Ht_TIi8=PZOYgzIQRXa^H!~n~xh@#RSwmKnbY_A$eyd4<2d(DqgMh2)I*B z5!^Vx{`Tw;?w$@%ShCjg1u(&4hrBYOF2B%N!w4%Wpe~C=j>!$Q3|VRYYcK!)x7V{# zFRlBTPzBX)v|S;Ef`bu|pHB*ZmgEOv5=ePHL$FHGl_{j4o?qAkEhPAL6l`yS#s!xF zF=ylo_g`yc;r}hfc>Y%*)@n5J=au;Ygt68d8d%VkxY%Q(8@URsHjDJ)&|?#XdtqTh zg0%2gaYpnOXFLnCbT)B1YS#JEqGaTZkss&nfhXm%ueYJc2A$`j;-n!VPYN0LFhqLlS&+O%T$TEl}u4(`dy-?wS5iU2__E{ ziGfFI)sry(GE63F5cWEjcOKBhe#@cbAqDciQG+SzFFCz&}?dbI~W@$! z4gA&@!EDzVkA>wA{mqBUE!Z2}zc`?t7tX@rb#7Iqa4ZglKOYuUZn21|GH(L3w8Y;m zL)wwEAQO)hDr;Q%dR_`CE9E5JAQ1Y&7tHDMe#!TF&0mCuKM|?;(X9~G7)XeC5hEWk zdhMk~@Qzc*^^sHeoTkn;$2Z-Gy z!>B)iQr5&ko;BIW9UkHC?s3125E}XCVKj>u8PuJ^rEL6E0F@(elJ0u_K3}YCL^~Yt z+pL0}y&OI)pMBeh;b{HWS?c{C&JycITmcm_@)pkc!+o0$IcmPt17@(DBWi^@0&d}* zY_J?{T{B$?zrp5wB--Ki_~`FD--AS{VIgPAGTHm{j9G+hVc(MFp|q%31`~JZq~8G} zd_z0-ZPGAV7Bw$vv9} zff?T;C8h|YQ;sPRW2Zl5$=u59-C+S^6uyU)C&$8$JccDGxjl^DpGwsPh%bcxlIhHB z?O^y>wPbB~f9^}N9bK}$S;eHv^b#O7{cT4#@%_pm^bItxy25Xm3Hd4^$4_bP`TR`Q zLH%RF(N8}HaI!KAm4DN<${s5^yGz7AACcUk;gIE2a^#D!I&bwjNishD(UIJGZ;^K@}PYwDF#b_qSA4kV14Fa8M~S*tM%G1+vF{wbRR#+?|s0?kyf=J)DR zGh~z7qnT8W7m!H&-yWI{4Xx)VKAT-awPrWXkAK=P#{IDq6DotD!{W9tuk7IyTJ*ra z-_&YXN%&|%^n)^Z4W!gutiG*GfGaKS6+hzH_YVKi{Sc_*+2NvM6E4dL`u!X_A$0E zsCo6Qw8p^@2f~Z5{2v?^@Oloi>U;vk08Z1;<7hKx_pFL39kIKNkY+nB6yAY;DvXD( z%w|l<*@+L$3?+7%C{OIWg!es2;%gUS8Io^LVep=J1OCa1L%)0~T=x+=WGMCO1B1V( z9>V4&X6~d?cm-Xoh91acn!g+n7L)MC_-nico4}>O7UVkeVu@zqUJJ*;d>U~1hAjNB zhsQGwM_yW4DX!v0p1g5j>(xzToZlrA@yVCQgJLkXV-?_@(tf*R@?X%9vq;Q86I;DR!Ug(T`U+R~otXb@c~|pX0}e0HiFBlf^&b^nb!t z@3j|`T*2O(x`Jp|aoF@rAb|VHo(QG3dkyy)+~xnyP`KjCs&+E)_7*5sz=^p#UHXv^ zF)m>|?Uv5rQOeG1>0FJkx8xlb=r><-m%Dle;~IcX4kKflT{C`U7U%9Oonx9X;j_f% z>KirrU7hHC5(!ksZ$L*~mMjeZ{Pjyyela0W(7vBOSeor=6-!Vy6F|AK)Y(&0Q};~Y znsz+3#KejDg$h8u-y+ZM6~Twjs2e2`;X1_zf|HSRRvM5I84zf=n;`9~zMxDwBvxC+19C85bhT@xeb)IJb{yn6q{3v zncZB>Ypws3CuSS4EQG!P@(z`^971wAuGI~F-FS+^dqhONaYaLZO&y5P8Ku6IB~v}x zr5$)Vjm+<35HB&Z5bHyuhq{0Zt);%u^mpDyC;ocBwcj_|IA5%;s=>{)*3g(3DSKs- ze?hobIR?tMGA%ghe(A6X;g+@Q3(|}uhECZZNR&;AG3_+&OHIx^a%SP3oY-xf`6yj0Q7d9>G5Z2 zSy>S|xk@O_tT$xpAk&Kt0XL(ohEzUR#)GMxskL++P?qK9GcAsF1Y=|xqyJ!XXnjg< zPNllh040}g#*SIQB3+&i7qg*}70A_`DP?5^Ys;S|7`x2}OHLB_y{N;!Dw4Kyk~X53f*JLVyXJ<)qUq_ysgdKt6b5z^zU~?7g^ef;%zkXW_5oA$BVC9d?MBpYqu~%Q zQ>6+}k4RU?^T+h7`MYlY!H9i=26X-}OIF)>1Q6~I_r#b*uWC8n;9=5Jv6HyyzLn0e zSna5_hQAqaFN8h~#Sjfu6@(bRhw_q9%g{igd!sNSiOTAd(+STqL#nWk($I5^nTVTq zWxUfGqDKMcr}gc$XyC8T_^Pb<)zdlGNR>-dR26HhoE?el*@mS(qoqFr;~uV3+s}l4 z5uThtJ3EwN?46_0n>OrG!F>n={2^Lz;^*jokUZMK4%FhDXbFCkZfn;M`^2o}pKNBM z=(o_yT8V0RUq*T+$<<|8?WRUxsWF_Fnfui4{163^pO(i#M8VzNDfTT@INA3600J-G z)Z12y2RD(IvP7Sdd@#Xrr>?4%>kItGkk$`zzwJf%0_N@zq2hlxIwEKKS2@_IVh!) z8>+Du4Hfs-XQ?6%U`UuR%TWG#NXNcsPI^$x11)_t#IBn4L{}bjE<8HE6gjb&y&Uy? z6M{3VAj@M#%N@{@-BX!2-!vcfy%=^ypYr+-Kuh^-WO-C>Z$aI zplKR(=-XyJ)+9HkWM5tXbY6sp?68!B8GDpLCvHF*eHh;a@<=l%oM@K0 z-R8QdMR1V=mEU@K9^UAwE5t=;BqGy5^KRex4H!U*gjxzNJwLf>uHOqjMd+=5J3OIk z^#WojY$!lqVCU@UZUhKva9HtRZ981dh|D|tl)#o05-?8Z6n-Vu_e>~VV0K?W_>S5h zuU4dVX&nR!n8G3l7d9z%Fw!G*Wr3e?!KJlrGn!M14HrIG<6=_-fw-QoP&pIk)NCsL zr{69c^Oa%&{w;>L$l-pm!gVl2;7t-x?$BnKMJzTaO|jx>8|e)MQmY;ST_@_6YTHg7 zSsCM=OL3Rl{657t4DuPak8vUp_Nr$R)Tv>k6tHkrTq^oxE7lEvsfRj>L-L| z0tEE71*Q6rDCN)x<0oDcmouJ#y*<;tL%sfv)j4}rwaI-B2x>L$BN9ntC+z%QxjDn- zTa!{T@Gd~4YaB+o+G|U|q|k_p`|2Ivsp7DpLXIbqynZDDv*>%@3g9SD0)8BH%Wuwr z@$@EW$Op=pbN3gEqTMpk{0A?&?S+Jb+Wk*x1B9&J7dk2mHWEi*mS)fSK4$VAlN#OY z2F)9VrmU%(1<5i`20z$-tYK}3iS)+nFE+T-{`26{Tt1 z(Q`X$^JWtslb{gtNBY8gdUa}BKM3kk1qVqGc~{^z8*FUdAGQ?y7HI4a+XMRf^*h>= zX^}r#1;OI0Uz_%<7iJ8Iqhx>BTEb6uc?)@rYfW70QZt(8S-wz(ws_F)feq%?ZNXo2 zbwxgg-6*}DYKup9WRcuDiL=O7qlSt|Yh|F)D~Wt;i$TLDrX}e*i+@0FL`2#~=X*Y6 zx7fY&|LI~u03<+`GBN^prX4cTDp`W#uaOov;WN3G%yg}PBZ3IHME#I(3=XjN$_`1P z5t|=H$l}+>C%qRSy5HWHX^eV0I%6Z$->*4|vc7MoTimb{h5Z_oMJ(?#bNW78 zD1+^?04Jvo3owaE zn7b1tP)5D##eo_3^pEoLsQ>++9XV4xHCt1C+=FvE%Z8V;ZsP@$ytB~m|c zGR5b1lqMLtHsXBBDO0uX} z|Bwx9Z2W9r&=+Sfz+ykV+Us>+ZgZ|!m2Sots<>xRk>-9n4G5WyCI1>Xd9&!CoDx~m zJ?hxn9U2%bS|^ml^*1PVJ}%V(y%2@#R#8a1U#m*pnS+xi8LzewR@lPJv22X!>7;oG zSi{vEJ7dHDVvWlm2>tHhwH@_5NTNhExOjN~@r5!jzbwywv~Rlh0cfJ|KS{?V9BP6h zWh#+z^|xs(|MtrREzq>Np!v{fZ*l_fwcQIRUVQf?=M)C(X@=K~( z)Qg88;L}Zwggripzld;?n&`FEgANqkT|PX7C{*>csiH;+gCtY~sJr-1K;klWhC5SR zI@?+S58ma?y^>#e zqW-2^;4*+5gP9@%SnWL;rjfWLU6B+xp3H{Axb^k*%=~j>Y$0%BZMQ z!if*k9b+#vPlGp>SK3DwTCWDblzjLJxo!q-Z7r6D_vTB|Yq{VzZ=go3eh)K&7J48m z?TO#la|W3R58m*C>-%xK2l zJ=MYHOPf*g6+R*i?!w)i+;*ztc-C1YVYcDzqPc@2kN&My!1SM}DR7+iWLRkr{@zFt{o0 ziF2->{#^`pE_J@XL{LPy4n8!kK9qyR?-L27HCX6j$RC*01q@Cz0`cs8R)Zfr1~MdG zzvWj8vv2tMH(tCfUMD>jx_k~@eYzhwa_-u!`7H+X;;<)k_wslJcu@P!vdEe($osSR z*k6oEPz(3$R+6|#*Tc~Cm>#CNK9_&ji8Z?+&PmBSsq=DpsC24HsuF`Fx#_Tx024=v zYw^|1&k~b#DA_pB=b=L_*4J7JY%`}p<3V*`@d&&$^YS4@HTdvA4y3+*yaMfDccmxH zIC?(6e^oS5QYwTTDy^j{vxdbWEzhyY;%Xog2>gw7H@MXS9bvV!SY}Ue0F2l@&0Wff z%|!R-yO0(U^@2t#+LoOeNwVa287wcP-TstzCrUERVCdR`Cew(f#kZYUV!!qQThc-> zqHeZN6TIXRTldH`in-|onahZBwA%~9qX^tb#H)YvHZ-WQoDRE9 z^+8t;BfSwfBfesr-*?X(%4CEr`GjjSQexKk{pN{q@8E#N3l2%KwK(g+zft2jQt32O zIyB6W%AF~*u1bbh%3dN$p6Yl-Zy_?lY4;5Kvei0*F-$wWEh(bfA)c3w$l^40&g$_; zrb`ipqt118n~yyUENrx^`z_TQq@4>yXMw(=4%12hWwiHxB*uK$HoPp>>2%aNsOGxv z0v?wOmzZeC#WplBtdDT%9>Y*p7BAytU!t6~M}tD0Kn674&Nf;kO3`+y_COv{Lighj z+yf=aY9PN-*(@>pa?M+=@b$UDvsTb`Ii$FxWWEILphX0vv0OK9i3<(PQ1|yi5K8CW zVM$V78lxr~^ivdp7A8=!b=C1&v*DlTP0O9lAT`~r!!$bUW#Z)OU^)w1Pz_l`8dLLI z`x=|zBSU|xMKgD7nY@uCxVn2e^VB1hgb<&piW{=kUoV^o-AM#m(R$xaP~z9H7)tJm z@7r*w-ye-k<$N=&3d)$IH18Mm1Oi)n0 zA=-_%79on>aaj@8**V3E-VtcAQN@KlmF}xAwX2C9?;=|eT6Eki`>uT~z|=pjVGhk4 zXD@F6UDB3Qac8mk9$b@a6SWzqX|}3#(+!l;(1G#rB51ho*JwA7ayK23sV>t%CbF(p zByqAL174ZbdMG9%Av_gWV8ZZ`5n0O*LuS9w%rI#50Aw$Eu-%twlX{klapqD59oymT z-(!i_L%bmZqPOUV(js-lKV=4-a91n6Z(NA>foVQ6nk3Ol^Ebqi{vpA~`89SD+78&1 z2pQO;bu97pM$ItU&0>;M4HIUZf6RVVCy8EZjm?mS2g>t@>~$r6Q>fC~vwTO>*Hy~t zeg_>%dxGIk3${=n8(TNgUVRE03oj{sB0>ipQrpMrF zM8se<<>CtgLq91}>nNm5<*Zaiows`sak|eE5%vO8jA?&5!OMWfHX=3s21ySutYXO( z2%XNg1cX2A6AgXPJAL;{x+bSo!;c^8TQFq$=0Wf2A}YWq-OrUcgNP0XBc8CePW6ZJ z#9g@*MT0k{2q5sH!F*F4DYQ&6rTIi(P^P9o>f7}Amy$1pfw;VTHdW}hv;72OJoVs1_w?N2aQ9=PP2;N$vM*Y2wsFLB(e-{}kg~&4#Ay^tHAo z$C~cl`%AN2*a`^8;`h5u{yJf{7JARf3kRCSYW1SKC7IlNbJ*Ec*C|%#Sd;4z7VRNW z@-`&Om1?oc{a&zTkXjWu$D46S2P-VP6o7+uAeEC4a^St0&k20(O7h5X-5VMFcjndx zt(Hg>?-{9v+HEB8#NEpuFZ&Y8U{f})`d-Uzh>#G(`2dS_BEKWl98eF5H$&~r&EbBF zWQE)AG3j}xe)MrS;@9@?A(KAr{7gP!k>*R0?Dq+z-^07{e6zE+JwfBMe%LTn$9VraL;AL&I8q zAK>HU50<)6K$F=%4T2Flx|?S7-P211y1<=hAafXjcu8U?f1rS{c3Y=j46J$bL*%Pb zZ{cW_*VK}$u9m-4APK2NH}1zF1V2OKPVj^6k)_T3UO*$!W~_{LuxPxvI}`q`e=@22 z=4@9wzPA6E#bOoFschvpHpECaQqU6U&E@+d!o493Q{wcQtB8wQ%P1!-{W~>gPs>-> zcj|-)5&XYhb`-iFcKO!@YlB@sBn|G28c?41e-|O(`hY&S z=Yi3QVyOtvT?dKcOckMRv@1|oicN?f+CCS?kEakZL3A_{kv2OP?UGVooYh}TH(aDo zB4Ctu)2x-@8_{No5%WgK#$*l`OMcHoD5UjqXcjVdsjq-jO&!mEi@5Azn)N_2OR%HQ z;d#0lPiGxJVv(A&cC)Vm4r)WvS|o^?>qZRXwJ`F7uL&jiwxO&JJ*YqDhNkc>Bp zSR&Q<;sMil@jP}VYm6_1cRch=Z$h@otxa#d@@>gTBZKx6+si*l3}K3gDo4soz$k5u zuJ&C+MyT_DCv=@!badJjf&O_Q0N(ORJ4=wmP?zazqY+F^ZjI00$lnk0f6hd(V4F)1 z+h@>CNuW~{)17)%DrFko-Hiyj7(e&=k5XJVg5;s4pkrBGWkWx793e>df0w!IN-eJQ3j_z1w0n4^CJl6h&gdPL-misp9xK9XqKu^;+Szj_OD1h)-|-?sKX(3{MR45a=+vJUFbYI>mraWx2Bcm@UrX5Sxmd=@(zMk4#7 zxuf9ESV2e26g=`Kh&zqWgiQ`j_%r!Jk^T?Y9D6Ex{NUl?;V8WG#%;1<&ur@f-=ZG` zU~EX3akMK|n8yso7NHBo_3T(+1HH8g(PVQX;pYz@@{cow#C3}+0ZoK6fm(4=&T%dZ z-w~TqdO*tF?O!HnbT)=V+Dbqk2(Ugsk3c>~YrwiLA8zatv>TZCp+Aye z4&LL!Vp54?G|#Tf)*yRluLfmBfl6tl1$YkcMR;y4?P;#RiLO`OqkUtPZIzB)O#HoV z8jXATGhaq69#wTKCxXsdQAQs57CTB`T)~P(S{us4mZ|ylOYJ(?u!gT6Mht!W0}hiQ zPa|u+^lyFr4G`<7DR@MMTF=CwCzE2ai_<>@lBdH;w4H{tH%BoH>Kup?SL2t~V>sLQ zUXo}!@L=F~V~~_uj+7dJ<@~#9kS*2R{?>fn*%x!?$9Cj$`N2XI>MjM>^rbByNx#JW zYD`SIzPu(XIXlAHr^#GX(wSp`^K%j_ZH(o%lldXeE>oGtQ9dVp78)5hWFw6tq(j?A zm1Vejt*b`(XeyrcjYbY3I^(OmH%Uo^rIMRgG56t|zY>R>Q7FAKYLOlFrer+qjjx>qr6Al> zr`O&~6T6je?L>P>*d*7B15F5g9P^48WtGpK&^{J1exx<6m3e7Weg%tm$29D&O@01T zURdKkzE;q_v*n!EWH=V8{)Aj0G+BJ)l(XO^KVOI0@>Isy2{&q@cn8$6f;zG_sqvaO{kAdp*@p!wAF?BV>M zCH-(!v8RRIMjm6*{7r=T0yL9UPhNLvY0xrt{zKV;*QW`Ag{8%vn?P&NSm@!7JB#k4 zKSPXN8o`E6*iFUF@TyqN`C_mBv7a}A{fdeX!`c0B_uE5-QA5r)Xzf%=O_%4>!P`9U zjVt2fy=y;&KYBBtelGv->&5&(ua{EXNyK^L*ItC~wZ!JeS|7#C-_Zev9)kVQ5=k$P zl;6kZqB+QA#$U~7)`^q?=m+J#X_?zJurv2GBo4dFJqdn&!`%J3g`rB3U)-zP^xw=` zeXg^dJMGMPcWxQ>Sp)f7KUWj%0^>7E*?6MG%{QHhg#vp45dA{S^vC&GFQgI_w=!_u zStPqi|DGRV!pOG^fn?2JgbScH$;vE|GL#za21GUZ^Pf#t6L^nDrRH|B8(%XOYiX7b08o;fYj1NG_$OUbbJLY4|aZKgZN12_}$eT!t zYv62X%9h}4()jWE@jd!POWN3zpWIu|d_0SdJ?%7)dV+N|+;vPq7T0-r95U-88V&Q& z{C2uYjV=PsUWV7xRROUibrT0QTlJ^R%5VXHLqU^@h*`s|fEOODn~l$1`2N{1?wQ|K zGbSbo@zX(=WPkS4`uV$=%O}m2Nz7HJQx^C?OyB&iBJ^iWS#kIeQ$rIIN`*y~i056S>yKhA>K9s+DiZC_jZQY-jf5wwNG;h(ICTtR2sKBl> z0a|h2HX*?}-vmabEgrv^vN!GCDYw&nWL$rqR;%@QAdk3i@^D%vT4E)e^`SC0`iDpR zE(aR7@>+-PV|}(3+0x~_B>cHH?PE+FEpd@z;&=WQiavQ6|JKvgN=Am^_l$2$)gsQm z%)p5)kc7DrK-uKUtSvNEiWnEb0-{ctf*Yj(s^1Mv164Py8~1C2&IgHBlW(?E(IRx~ zWG!_Sq(_jyrG-Ll@YV~01(xWj=z~uDC`gtq#tJX}+4+P0s8OGEBWdQe>p95vp~A>f zd?#pChSBq7T3_&bRZ2;mv;4#u85z%p@lC{WN#V@AKneI6=4ade^o)!HVI2Nv(^^r!xlQCrz38VQ0`&&umE$>I_s8uKuHwQUZidZJcT=5Iz*IT=jf-%p!!TK{5* zdRuq9wXS4Kp%lPuF_z9J%mJbvIE>b^KD&C>m(}}TIMF|@D3CGrCzcplU^HIZfueM9 zRLOx!N^M-rS|{%3rOayp%k;{n<2+a%EGATdi^g zO2bQd^{+hwN>%JqZNr+OgnB1bj++RWW|V#3UK2{PNBMNjY9F*x7Zlt^t$`gTNC_gfFAVrW6_+{?7v!WhNvGV|gOYq^tD zY=WzC66Q(&ff>P;7~I~29OvB%^+m`!IYwSP{*3BDxSX@RS+E0J*j>giH(9Xh_b6&* z1qQ3u^lEf@)hHQ(k)NuRtC)$IYpNJ2Gk%|k8*$#s%gc*P z`Lkq*=0-*jvUc#iYbxgq2m2(5N$ZV+q7UNFzT%IJKb~(G3i?>N=8ztxe$Nti)B38t0@-xnyN_luqPEGqr8ZdJD#Md z-1AGw_04CYl$tQ|yWn5p740!=liO2)-mDIx?{ z^>Qtu=2E-3wUYWyD}E_?KgrJ`4@K-ef7p-miaVkks1&6Pi~NFVJ5wtXE2bLjx*fj* zI%^g-ToI!8Gsq5}dSGKmMyyGxuA}Xn;k*1BjXg2TWyLEXUfw_-i2|whVZyh#UrGG3 z>@Ntu+!R1gAj4!#M?G&W(!JNjMJngzU&o9m5-s-re(e+UQyf7OEqe||43?~T5*NXT zpXBqoG)jkE=R1W(1xY2I6XiexJL-p#NO4%Oy&OH~x8=+d6TYtc)|-i)nw!0#qe zzu2Ns{&n0p*~&q3Y_s*f0udM+8!lBMwCrWt!|rs-uRiE~g!z=iuBl@z9w$EbFRFO} zG|7SCb36ixk~rGW^!r@WagOx+jE-3*^6N$~Tsb4g>%KHdXixn-i0?S;g!lUMm0I{Y zar)`m18VBXEeq^TO>kme-DCp)sj@Bx{KR=x+W2Is15(NKajpkN+P970-1`*xvC^-K zJk=3uDZ~RZ=TE<3=Kda{2rFr-oU>z>*!UjKlv3UHUR0NISZr%zbf;aG(wJaKzJin` zeJ63?!-%Z}^l2dUiQ}(%sZ6|dELj5Y_BJI`SOh*Y1$H2nF@Mz54Ae|Ap)7USFR2}` z$uUFoZCHf)c--^Yj)5#b7UxV`(upNVO3Ke^Zy9YR;2IMQt$UV_zZtZ?WWfyo9c}lK zmR2KZeaMaNJ{&~&+kV26;}IQN?(tiM>ip54h4+s0nuo?>fb3?kw*}{HkD#$f6kbP8 z+u~`=nPL`Es+^Z%`7?|d1<{UeG->2WxERXnCkRUaILX5%hoc?R9j z7g%g>4{YE`A0D|A*gBCU1NNn_vVz;`I(_yp1Z(xWrfbqeyUpR%sQifj#|01nPW|Rm ziTjHblb{Oz40`m(`a)N=DqFCh9V+aqzy9yH8gAMI`)Qj;+G0)P!Fv)MGmd&P1#q2jLD(E)Xd47qq?!S==R`6W5&NSHDxOD-hL?!qYV8-j> z8oT^zC&#d$4`FM2SHS12MS+Vdkl+CMj=Dz|so1ED>4Zh$0F`9Z2_c)bdQO&`^{|Bq9#)-=m>5mz{ z3iFN$*{li$q|~XoMbd4Di63%W0ne6{|92ZLr8?oavM9!BuIOL{)Q(9~*#}*D++!hr zW4|?pR#SmUXwsKM+YN-c^@!iu8A>oZ`>#vZbmyt*dV!{F6?8FED82h9p51OS3S=Qv zD6c=?+8jd=IXagOUn>Y9oZG4828DzQa^L*5aY*#YlCO7zNBoo9H~0-n@B1XSfe{5s zeY&0NNlhdnGSXdUCf*3W_;5J#P94jB!?~p~kv`lYwO% z*4kx%cF0Gwjd;6r;@j-{@Pi=tF=#0Id>~DET_nZ7SrH&1kOF?5}K&e z!`bFCEIo=#=J}zW&6`B_l$rIf{j z(nDes+TB|LF)S1_6E^7(b)t+gvAudLRT&mJS1Y-yvA|UDaFv;__Hr|%(b|!TC4f_ zjg@Zi6 zS9^^WcoFqdRvp^ZdjixTq+8o`g1nz=w&Plq**?8RsBZB@pxv%1UkPfBl23sVBh_xw za&l6XP6OZhSY7K4|5nBvr(zgO6WCWTJ|t3ckM+frQh>z=|JH@Q$BjPNOLdWQAgrmA zwiQ23^O8pKPbA2fj^~LQ2BCd;aS{_Q2pd3Cbb0eSz7sZPzqjV6Rc>o*k8)dxcYX}d zJe?d8b6Yt@lzV8Tnu&&wbh*)W=PlHvwV0NRe6OvIRP=s1+04cu21X``a{Kai5HZ6> zk^i4h3<#iP7uRPeW{BF%;aocVuY_d{^@@Q@lec>}A+*BmqF}c5i*x(HAp%5V~hyuTM*PSw0ZK$e$tajjt4 zff*Mwh~9>wQfix>gvADMD87R4BSSUI2W0W)B9!h;wWO?5*H{PYGVkCe;exS9+w(t# ztfvKjapSwVKzi-SvVfo<%v(iht))iL<&PxVduWaDaNyd(02V0rk^k6#+f4CxEB=n` zQ9$gxzP$8_ zagCXdMhE3|IQ+M)EazKT3GvSs2Nw1OSevo^AAMbqA3mO>bgNDi&66HTQRe2oBb>vs zUKux+mNSgOW>37^Ga1*t4FDe=9r~0)?E=)o7q{y5+<16-F)m-hw#vL#bVu7j1uQ{{ z6a$u@=2L}>9SnS^(%*Bs<;V(>;smtQ^1qtT6gD^o=`zaDC!X|q?};-vU5xyz+;Y+} zRUCbFJRefHh3MJKpJ~%kl;U6)_~5p+bqQ_Ei!dA2A}$V!?=Qwp#uY{x)%dp4tsA#a&`>Pq(1Tn)QyK}jt(xgq%Ln|#SMF}IXdCc z*2&ohP4@-Ua}hpz9kmZp|0)Cact``WeBECV_LFGu(mu5o$&=?~N=;+)rUVDy_a;G# zShZGiKAwqks9mUXTuiwSK}UdNH5IPnyU=xG`_h>)_OXOcX7p)4Q;?AfeQME2LDK#PjF?J{Qc55j$J~-%SgWJa* zkxKHLjSYSp1HfEK0dtUwuaul+RRlR>us^TTG{f*Mf}3ti{TrVY6?Zs9#L+5fHID8a zBM=P5XJh~{*XQr*T(%mJ`B=%>fpfu@F&^5OaMJ2LA{2Oy$vdq7md~r}kf=l-N>H5x zd`UTWB)oj>@SF&6!#UW|&%6#i4KE2(fo$k%kAlN0L>cc?B*0Y+ zJ7+t$%Bzg(@4g{YTdG7z9EBe(9Zb0+#G?75Rsr4)qsBwdN&R9r^a*q^F9fO9ayHK+ z1VK5FcgT~ih$Q`=2@%?=*T&`8PR}Ab4JW;}&q=d&RBs(bZ#~N1jW50r6#J*zBD{dT z85=XAU-|EzcM-fhbAdAm_A7Kiz(0A1s7;Y#-G){J0Y?0e1TS^>;Z0q*tTE_Yrk!fw}T z@8!_@7R>*Kveeg5rpijplLPq088zGog+&umtNl`YqmJ3j(s!9RG}I`mD1cA03jqSC%CZ@>)MU2!g!HBq7(}E_|7K`rQ;-l2K)JCGItaUzc8x0 zni1j2f))uAG(d7-%`R}j%n$LDj_MJS;TM9UQo+gWU|E&1W8h07RaI7+7qizhAAKq} zJxNr*tzOUN`o>0SUw_Jn@qhrovbe}u8dD5ri-FteskEsMmoBr3?LPaYDw=v`Oil7Y zq-Cv2$-sc}v31ew=C1$bKq2f#vYcIV<~*|U6Q^V`RbDny4Tgfj+~U%jGA3n8jcnZj ztz1~29F5LfMwW!kWoe(yp;TX3)7hr>dFA% z6s$#z_M=9JcDj(Qf3oX>pcmZ?WU%^kwtzy7O7R`BNyMy;q&N(6@%uJrI)LBfqyJXB z&KS+@$7$6tb0=fhgX5SBA}pH%(=0tqXfKOV*qJfH*}5VL$E9)F@gr#u*En#Fd$P;z ze3_b~xnk^V<=EF2x2zU2%Jhjhra~EcM#vA+b^T*sTe09IDgmEpyUB8gfTvd%w62a7 z>RFdrEuqmk1D)EPabv#9xTFcj(Hurr^`j$=be&&KauQSn8e{_kdPhe}NM3^nF06^< z>tx8bwX*Kj@}pqgHU~o97w3GS6iWEA?z^rF1BG1AHzF}VRwG=o=wr!EG!9cGL&lp4 zrVC1|@5pC6d=LfBtuK{W z%uTU()OkrO6}hF*hvh z>`dTzwe`VS0!bc%W-*cwe*Smq{hOKbSnN%->F0QMTU_))#g3p@{10@d%HQlhc+2A^ z8d||*&d7P$6&q<0e_BdC%RfUu^t@P}co@%FACs@&EG^1yFT>~inv&ZlxJ zgdb)BCIgFtR2|R31Pfj9Qe&BlT~Ira(AR2Z;>3pxlCqSV-j>e`+JJrfEM5cS=;zY^ zyr|v?n9lyWg~I-CNLr1`r;G}V(|wabqw@3KqjqJ*)1u2(1tQ7Mh=!y8hPKk6^Gr)& zvBdg&A0`yA$t%9GXwZ3rta=HJp0CzB)CEj@R95R41T}mM_oR$|M|V@47=5NC{B*AZ zq~M`w96I*9jGF%-^y

E$8)_w__we8(WGQ$@2BjZ8umLZvrYyl#o&cInO3P}CGH|M$~MN%`<-*@GxLWKY1}!< z|MW4>Du8uHwrpDu3|~7_PlRKI>Kx1q@0BVe+N#6xvc{{%25zLikx$bUEFvUr)LLtz z*QpffZ_Y~d__S*NUbmGhaCx zv#>g@oy13}Kw?b3DUYUsLW( zB;o2v(%DK>2BB>ZFOUsno=+m{Lxj|VfdjAH3rps}8ptgExT&2To4gupyR(ZLXLEpi zpHO|>v2W1k(BI6~9afxc;_B@**g{je(gZfa8o^12!SeBER5j&S6c#JYp{ z^}DC!`6v*gl6v-We$giqEA>=fVIJIrZoybJ`GqLyMG*+NS(IgH>A{{5dsirOw3Elz z*VZkJY5j0&H=QK))==pbjC7*V#5qKy-nU_fk1R*0-K9acC zdIJgJSh4z^6ShDCGeyNLA4WAy0Vv3j?^IuSAOe09@EjB%E6~|}xi1ZJREfVuB21!u zHPMq7!JKLkO(OS~uPI~bpcr=(^~GezgaR%GIO~Z%o;FVGoB%_Nd4OO#sjmy8CXEZw z%9FFfk?Cw<6f`k)v=)wW-$DVAtiy?7y}qsTf0|9C^inVd1qC}Hx9xB}P^f5O=v*ZU8|J}gaeL`W1ol6(^&(M7 zIINLO_2g3xL|kAc8>Ww2E^~@S(sbJW7N9)sfDyY%H;1e&>&={i@c>A6S~CAy32-Ve zCZI#vsbi8lDSibC-UR>q=h4l>vi4h|_giAQ#&Rm9-+#eS-ZGFcBl6h))hMQDI?lQz z^SiyTIN`GvqD`r7iXl3KQ^rCt*`2uk6KUDq=78_!ewmdPk$n?4ba~Ud{A+?7;MC)& zTI{RLu`cQ1_!#ztguulS^O2TEW;WC4u;sGs^o%jRklcL>Tr2o~Ik)b5g31epseMoU z+4dJXGf%Jr$-%UwdWzkPVE8MS4c1YG&7Hzl0oYgdzkOR&zT$!r1RVQ~ZSW{}X6J64 z&?~@=t(}~DZq~eNfl)3@Pf(CsJh8nY^~=4ET|Cxptw#%Lg%Vp|hQ~kmqga9zRsH|u zt-dW-05rK3s^!e50-En12{06oLQS8D@l;K>K0I6?*Gtw7pYOWW9N+?SpK!?pN3u>+r--h#17sQ>>Bh-s<1@mpKCZ0~DlNGZ#;v%)h>^(?I~QLawBCv6{PuYb1+C z2Qe6O`=IyydyQI0Rh%5u`Z|&QFC8r6vRd#OvIwxgz7o?t*Ma|853{(s)~M+IRL zfcZqZU^t%5(KJ@2;{E@TJF_i#9U@VM-0cu-uwipGEw?v`==r$bRMFZjazczrCRcs( z8LC!i{Z+g$b7s;c*)%AH|D{kf?FeW6-*6wnsc2@TL4%$92P}a_?-yGc?{o;Yqar=7 z=K^k_vueN%bzK<#+r;Yro0f@s<2sSZLzY5vb!usMcP^i@Vbfo+1D=~`l-aA4e0^eZ ziDSKlM&C1cng0Ouq{ylFRP_Al7WZ=Ai>Cn-CU3H?cU&XzL(eQaG>%=RvHli{ROA+E zw{Z&ZlKn3iV0*%MMUh_LM1^pHnBXtj5kn|A>%xfw&_G#B&GNq1LNgRV7!qx_Trho& z*G32*CbNQVoJtlkeO?(^pe-7Irn>sbsF{S~+cr-4+#3^9C(A%@?l{E!wp1re1I@Z+ zcUidbpFzH|BVApVo@=efP?*L5DyD(7vTy)bS1e{XN4k+QrT?aJd?{T4Z8K7LgMFqI z89-R~?2RLPQ5@lNCY3VuqkMdNYINQb{m^mL@Qsv8F2S-Gvl4!94i!rdDYw=n>H6BV{^7rb-OBLi});KTZl#{NiW?nl$DTk?BTmRqa)1K2xL9 ztf`%MFbVY00k(phG=}^iKi)oVWdqgY<$dWb^>_sfp<_A&g7oVlbFr77hWyjVWcrb> z8O`yPZP~t*sQ)@-;g5z%*6d-)Oe8j68M5vTU|OOF8_;w<03^2Q1sl@^hFU;ShLMy| ziK`jSv+P$%DukBX_)Qlz{pXKfA^>iRo7`I=q6skJ$6d0F%`;@!ueLpwuQuL=Q3L8G z$BgVGcE8U{XT3av#Q1#>8tALe zl}9?<%jWwqqlzIA>h|t}(nxWa`WF1_`a&zy1RE^?=Gj!K!ZY zPgmX5!EKSa0>Fn{dEfHp6*T2~EvRRh-}0mZc5=ao#nyj#o*TY(BYKe1tK$keB8!sf z(bzcYU0Y2K^#jluDTT!=)i*Le@9VxPd$5ZuRS%Z$qaI@l+fac#7oA^p_#wAM;2 z;=|4R&B}r9lo|#L1Dz%^a=E*ABV=@!rs9jQGkmW;AF7#|BL-rXW~BYdb3(jHyzEOr z+dQj$X~NewjN~1M6xChm{oZE;!_Ze^w@x?waEx~Moe_iR!yX(?(MJHD?LH6GlaKx2 zzSsd5@SnCMzZ_^wY){F|@~Qw&1sF{qqv1!>y#+LuHicXc{|_rkSqESx1--sLf!Ei! zpAko-47|RMkRSnvb)ZX0>OF8GgBmps&wo7OSWFESrb|lfMG>xPPbx^#6ftQSAfwCW zXfr`*!eKpEY$1wMzL(F}jGd(Ow6JM#Irj0+8ZBo_XL9}8f(nMa4vt@!tY6VXtSTjp z*XC*G~629`9WZ;L;;J> zVy~vt)$<NyK>Mf!~O z-1u345&Uc!eo6oheNQSg@QUAb!!L zAwpTD=%kJI{nv8;nHl%qdj+&!f7-<8NrLM~SlmT=wexdb&|LwFPJ2403cvVY{nEH}CTqZe9ElrOvus zJ>%XbM43Htt?Pfv)}P^L#$+Z+Fm9w!242w@Qz?#VO(rY`P@mGL59T8s((Siw$Ao|> zFJl>NFW|BTC;`Z(?HrCq;?FR`x3=HTiTF1Co)i%YUkeoLzqXdxQoSaXHSlK@bY~L^ zJF?frIB!5NJi5{6Jb-n@8eAEFHC$ z(xE0gJ`%;ny1#4)UizjvddiW?z;NNl`>@1-hM`PV^Z`dHAr(@2C!?dBVXTNRm>1Ie z=i;ttj{Hn0!+gK-wGI!>gt5;A*~!hf zP;fp;zWyhPV6=P@*%4O9g9qG)p7)@pEn8O%*xh5jP8*n!e>IIZ;t;nfb@<)-=>rdi z#Ru!Zq0*}{r9)WEzMnuLA&;Nc4>+KQCg&UF9Dhh_rr(L!3g0|3A}Zk{eHO`d7UWjTg0E;?3rGN zSqcj=z*AxhaMVq06hIl(Z0@hc-|qF@d1DyFm(nTKPe0bebv>6(zuVtLZNYmrveIh+ zW~;+%O@9r*D6jxE8cJUHA1FsY^ZsAN_iNGRafyJnMgY%$Wy!GhIbvX?tcf0$g;qMu zwMbFyK5#M6gkf6P$P$cnyAk-OBJg+E@VAjV52Ss%GR>l#FQ$)J7Zaww-kPtR|I30 zb<5XsEPu1|cF!H>yowPFTOmah+87n?omuC7d*l!Kc>7r7!U8qlZb1f_gnDnFj8t*` zMNy>7Yn{`1wKRA~?=@-$f}S1M@fx}V;07aPIcEvB9P0bNE-sPNWGBYwGJbKABK%oL zG+xSJ;^GEpwNJJW+CUkOziu7PszNcKdwoUfR-Zb_S8q; zEy6QFxj32pMB=T&Pibn?dbrG^^olig&O^FL8hfZ5Ylw2xw6+}P8Pn-LHX-9|stOKl?|1hjx=E4MOl(*?@LN!iGL$@=qe< z88LQWT3xGnp(Ie2GpxvwVyhm{O+&SxuY!*0jVrJWTMk@Vp#`+1G{El z41y++L4qfoBPF#b8A0j~)+JU7b4?E3w*gyHH-;t9GqEhmK45KB7 zx=suGlSA7|SmcTN8op`m1rugxT?JVyD7Ru0=BVhZ;@qCQa2mg~z){PD;4NW|O-&8Q zCYGA-vQKQG9E6vW$h?`9Od9L$uHvFPyppZGtwjKAKXlZ9KJZ7)5v*Xplv&)V7h6$q z9D5_iA6j-=II_xC-~VxGWM`GQO`>YSV#i&e<3xK&J)N57Eju?KMchn+Hf2ip+g7A7 zq(A4^ACI@9yC7hxf{mHd`0NQCRSffU3;s|oxkI2sax7c^9|jG;PE@xJ5yHqzSU#?5 zqaJ3Z?i;($6`!;HYiJzFW6xlcQ1PYw={*qkH-iC+h1aOyd#2ZB6O$?_Gc)pGlt!PX zk&5gvSrR;ly)1A}$~(BXAwbz!W6Lq{IeiVl^v)2+RN`+sj50snu9mxd?MHIf`dPyK zB_vFYj!oQgXoU+uO>i?%R4e+q>(%Ip-Q`__TJ(NQ?QtFkFWb6i6CrxQUtw`TLtXiH z)H4n5ouqu!74hMWC|kcltSSW;7p_>K7%8liqO86_*6LvR_QOG6bMcU52RneeE1`&N zEYA+j3b>CvX?JpP3sR*;h!0^BZ_CbP<~Y2R;5oCh4nfya&&LM!@E*)(Hj(_!cJ!pB z5rS`F$nvtI=?b6GG-%7VH>(b!;y{+_%7!c-;B=FNLSX`xyFGPyq+YdRuhq#PhF6eGRZl_ib@ud`1Qwg|`7Q<%kn1VX^uYee?jXqX zkA6RczfF}=4IpD7rOt+gddB6^gFQeAG{?}Jn>k+xA@`k@cbPYkWB;fr{QPhRV`C8S zB*Zp(WX`7P_uoFY!&S2d0PX>RetT4|t7j5Z#0^W`mPxw~f)Pv(gA|HFEkZ6R2y*jg zazlCv`&d&iF%3fjMHO*xe%?$`g2vS>709`K5&QdGVXxlX^c`rjYaA4j*NN>NG((9i#1c!(&)x5B(7H3-b^J4RDi!Badxa^|_c=?fIna1$!u{4Ym7e9HgwVN+oT%*c#`D+y0hsrSRwUQ*mo$!5%~iBnB>1 z_j$Wqf3x|nr{g3m_!{(oRK41~Vn9i#0zj3%!oQ+Qe*7i)bD?&Q7^+SiaPXl?`6=66 zWVIEFHJ@iI>o(iK3R)#(Gqkpa%8ug7VZNpQ_4O123)C|!;Xh0R^B!ghbaI;yaWInR z4t=6(!$xuDdS9uPDb>SUjrq6*U)AUsU}HBKhrV8w$*baT`&GfUuct*Nigv_MTr)Fi zY)^bFAy^~x`U9gi~67s zgUYfJfOP5a8_B{bGQEuDGfCpNDg3eYHXq?QHofiHjg368TU!~suVhI%eZvPV;W!^0 z`tOPrNV0-Y%C9NCqNp1Hu|V`(&?duq6n0ZII|-o@rNFZ=%LfQSL7MtU?)p1{Xl;9} zSTLSL?qjC?kL5JOU*{pSVuP)?q}Gm?9wNKTtkt!^A#NG^8P5d_wOU{jXk}$pz#Dum z2Na8dVG&=8N4({O&#$P9HHEn3P@$h6MsMCouUWU7a_clGeLAXx9<07gX-M0AR4br+ zw8UIRL}6ONb(~phc97v-+0Zc9hN#Dkfd!;b9k(E5G9Dzdi%UCa_Wm2{irfb?i#GPNS}3N>A!z}OCWm42iXk7QP;S= zJ(A~g%ISdL^5@Fv^v757n3Tv^|K4E8u}%YlxDuCICzfACvr^dga3-6vGOf;2u)d8S z2{H+6Fq@NQWgEKVaez95P|gP@*wBZra9GRSz@q3)I-X8lq<+2j(mB)0Ye1Kr7)WEW z^B_~%P}4jPE^_)s*`OMu^9|o|$5bg|g}D;|U?aU#IXTpawEuybx=q~DyYZQhhAQn- z$f=WJO_{1b=$LbT>;aScwd9o-2wd(JeSD3^4RXK~uR9>RGWZp;VFD$=D*!Z`8iARg z_Y@REL&-&aa0(n?;~H&A(eI&;@u07iqxlf%DNtR@SFi5E9E{afGcB7K--vzFX6KA0 znTl^8g}neq8F^K+!016YUGs!FJ$hol^G{u>GVaL!3rYWaZDNlT)8D+55IWM+K}{j| zHpIP#t%#6sP7;QOU*=s_b+TbfnyTaq-YZw>xp|O$3xw(M~^0&x#c7p#BpMEYg(#i$) zeZZ&O-7bA*)K)bj?D=I2lT+%JrukDpev|W+aJm@ZY|*!0%@VP6_>R4A#(w?{Ax{bt z$781{gg_6ozijqUzNBOsn&NjyXuC;@=0>j_KR}PxMVHXj9O5Lut`0cc7m$1ZCm}xU zUutQh-(#T}J!`Vrcvr>wQgH4n3dA|T1;;{e)cl$2$?&jO^aUO6byt7}@I^uH%}s!# z0_000abSpetb~B`F=tpw)ne)TNKae2)1J?%TeKiqSHz=((78KfZ8~(Pd|ZWxOK6ZX zJm9Qrx5c-Z5((!6sU<&U+a#T^V1^ydP%uE7PF@q5vR41giagAkIPF8_^~fG~Ko(A@ zcWi_1oVHCn>s7|{=Es3P1!%V^O&;PHwS+;l_fjqfHvlj7-^_LP@wKmB(n(rHukqA zcj~4HzIzdSQV+jFyHIn1e#q3M1;%alTiGG4Vu})TQcaC;;1gHJf&S-ia|i;c}G zHK~6eac8Sp}fPUhJ{oU*6dI9z78!|cmnW#P(C2!@bn8=z6Ej5KjmDREj zSy4k;mfz?GcluE1H>TCMuin}7>YX>cs&cP+Sr8?-(|zB3 z>TuEPE_k*>w0xmX4P+9bZXeV?B;n(SZca70aX7jmdrhr1h3w558OqZ<|5ZzUapP{q z{!?uwdH`+cV&auS#snco(u0#~|6aSEDsjr#KhV^7arqV+F$wEsySkavz}kU}x5Kw5 z74}9%DeE~k_D2qi7TVl0A*G@}<^({KSsd_HYEuBpa>t+mQi^UCx_z`xlwe#es@5N_ zoMp~hN=*KBQeSL`D`jkms+RTf;zweD{K(f+CScW3K*69km8+IpYu9gE$93(V;N-G4 z(s8`tSNZzpB_LlH$Jn|sngiC|NGDg-w!sEKaBd|6fMZ=f%88!>-j@7-Y`tT29)Gkp z9NV^SG-+ctw$<2nV;hZaHMZHGj2@g78A&~6&fNDf)~*LLO(0+MxS82**icd*M8Vt9fse3Zo! z)6H2JawDkCYl)nn-m>SNg2FBiji5Kxo$aLd4`mZcmi zn!lRjVh~m^6h$MeB1ZQomIXp{p~il{p(@OPXTJ2tHY9qpe$w8EvkyH{pIQZ$Hy~_d z{r=!fC=~%C|L=7TAMATZB3UkZ_%1q)&wgt<3COKhj-Cb!3YFSAxP?ZJ7=XvRYK5rlpvjwKT^cfWfps=Vl2rp}^a1ezAOZd8m;EBETes-By@Av?NfJ ze`TsRB5VI1Bj1ZyYf^C$zGtas36>vpMuYj)x^^K%bRG5Z^9&>`C!um~ek&%RS920~ zZhx9+4(z71e|*?&A3{$%$cUj+P$?d`X%^LT7H?rzBZBSi3b+|>4-mzg`KMVPWbgb? zboHdka6q;6Nd;j9BtM-)k0o#C@l^HPZdi+XnCX*~4(_>D&BOGIN5tY0@5`{KoGv{c zaT4zt?e4HVeV54~UVmYW2WSos?rRse?*mNse#ZOJ1`>>Vsg(L723qx5Gz>HxVkItu z=7tQt>?=s18*0vulz88=gc7H7K5w->IcF5og`?#bS)q{3FwtWp*3h=%u>*^CIwg9B zqu|01;`B;F^S^_3fS^C{a+20?K#UM+Hz@f7+bBOIX4TLsGA`nvFh&S!2_JUca66e4 zIbzDC=n4k;5egY4>o79Y*B^H)HaoIb{5T|3H{FO_F@<%_R@^y6m*Qm=3iFq=iIDs3 z!p*QW7pBU-dv(BUxR%&A)aWfNxM9VvHgCAi7&rV49^y}X&9N5)r>#IZE;})ZWO3oI zv8>ht^Ue3%_v<^$ZM_rB+3UT=lSUu`45w{y?AlZrZG*udhw;$uM zY~wz>N3N8|(cOP7UfpjVvoQ-`|A87&HTtK=7@|r^Mhd$>S2-BYBv#;Ku%ljatKuYG zkI9yB#)+UM(x{MrCKH+<{i68baoj;soQZRgCqd^YV-S?Ri>#;yu=mHDxIfuAu` zAYX#>Kb>diaQid=vGju>wyhG`{PW4!)b2E06K_p=?CT>}vd+1%Q(B&itf52%bN6PU zc&gu+lw_S*%yPKUfh@tN(?cX7?&`^W$*+#0ZeY^!*~NDAjp)X@8;9hZH~PQeo6@qW zmGM!~w>6=W!kg$TZ6RblU;>`)%ftekeKC#B1Fx~H?l;$!AfWA8y5wQ9mzVq+k*QeV zC=cOI z({jtO~4k9IiEY{7`jjg}Yw!uxKhXib=wl9HT4gfCBMVW^^vD@Z>)* z?zJ>e0=cZwXZR=sNmpOLcxxdoEBo(ody~g75P*@#eKKKVvf0g$3?Ee0Mz9H&#Z{;z zr2KOHkQGfM)YrZz^cDZNWhf6Au~BQd$zDy+v57w+Jtt4HOP%=^~b% zAH)sXcwj?C9Hn5;>&hhk_F_074n!F510#Tn=%2|!NO`>+z8OuVv?XaVixH%Jup~>-{W$tgY z^I^s==6*zWdejCklKE>8e}~Mn2q*K2928R2IPxXwjL4YB*-9OwQTrA7chl{uc6Ra_ z?=a zXub_zTpR|0Qw(no2TAJbN>tr{p~tK7n9vdx71ckS%o^WKPR8=O9+2YYVn=>sxbOTQ zE}?Gh(kpFH{Q90Nx-=cB;H z^a48+NwFeXjUHcsr238uXDhU4`FIj(m*Wm#<1d5-s(we&`O$&{kX*lv%nNB+Fp00R z!qFlcJ~;Wu3NjUZ5>{HndYOw#W${hqYzpY;+x$Tdm2(*n zGxhkpZg-9ot=m-I)CmoFq#?FwP@O7)Iwixbu38GNRhEXP&FL>lvy5Z=VUhCPz&fAQ zxPgP~qY<>Q;#1Hhso-a$Ar_Zjw;*W9os`{Rl(D_As3_4$m8dB!MCWkwT}SH?17W(4 z-NT4SN|I{%B#OR!AIO9al$DasB&DVoy{qAOwkQa|#W|6hfWY=u^^Hlni&gr&V{|1- z$YX22rvq0+5cqB$wj7BLj{m`dY1o5Tl>CHWuX*=DA9UPDHx^-G;b~?p&draKwQ)>5 zmhE7EA$Eg*7Vim z=Ql#{nv-ysI^Mv@OCQGy3@Rk!kgdRn#O=foJ*edQ7{V&^1^2+reAHmONHE+jXf;yt zVEq+0`QHkBNK>D7Im5^b{%-~=%4Nyf6&s~13ab_L)xb;i_r%d{U@4#EJpO?rtHtPt zgQle9i_d;RXLf&F`I?y6>k#6~qgaCBc)kGDTgU$pc;@&v;0?V@5>V=~M(lyrYBMu4 zC?7euTgUk&1ip^2mTlkElIjL2MR-ygdg>s$!ZVz zCJQ)lH}rRcoNT#}&3lI10SD^nMruLz_VvbooM75GiMbCqFr0#3l07^Ujg*op;BH3V zvFK(>4Pd#O3;hy%Nq%dylPb#wCWi`(Ai?O%2!LE+ zMDY+L$9QNt$fI)*Ir7I7Y^%Hb@YK}MxTo08pC>I1UZ}|m%)r+FWpmXke?m^hze67g zD+KlvGf6iu)Kj;vFwB!%>SG0nT0 zmk93H&Gk{3B969(b$z=DEvo`F)Y9ITqIon*aA<+LVH6LQixqzTUfDF<$RWT+(OtDC z0A_@%_AG%J;quF0qui_~=@c?6Fr?=lUri8ovvGobU~LMghUh*-CDM_eQ2Z(-XLoPm z`-tHwt@7|#L$F&XV*hgsr-Cl3SN#Wp@hg;~nQ5~vHuoo>EZqtQ%F+;QCOD4wH28`L zLgEwGAHQdxF|3Z~ZgU;tzOFQu;jSwi;sgp)X2uO60pfhZLU|oAueqqPZ@$FEYiOTs+C@3d~1P3p_vyMGvu+k#c zJZ`2GkO*~z@Vs*A3Al4A_p@qLwJ2{=t86;aEBC={JXy>~!boRb36e~pGFq(q(n9hTud2#2U}O8J zjz`;z;i7^OdOwG^)j7VR!?r}b%5^_PG`U==5_UJ?uEoZ(HAS<3N5gi`B9-B(0k-aAZ;0oiW*kcTPc((}^@UIUm+ZC;>{B^5Cg>QGl z+w0oq$4YK+YRhRs4=IxcF)){AGC?{=W2}v`Fvk7Vm|IhC2UcCVGn+7y$T+2JOQqCO zGJaS=5~jBzGJz$I{?K>D@aYs}qFB|xA!p<1ln?llSR_(Ke$`gA6?_0uyQ)wcdol1u z9z#UMeA~6%fCJB=fFCW~1XBsyM==PQ?1(u_DO{g5-UZ#MW?}};q?>TgF{y4m(b8rZ z4>fPno21Igvy+Bb0k0vkvOginD*Lg@X-pNhh6_9_oK14GlOviD1>#4d;&=W@wniJm zA1~^R)=Z%235_k+Yv!qUL*_qoV3Q_5Kb*4JZ?1T=;K*updLZ(kA@+-O8@+!C%tC^Zn=v>}6p5CUcp2KcC=jU)cqJt* z1l?l6puSqopy4C5G|bFHQEM{1?(N@|JEKm2X!^}lDzlI`p@p8$l-%Q7|K@t@?MMt% z^0lq@Q)>sQq=ZXmwJ{&GqTrLdam#}9}Op3c0$eMb%`eFd9q^zu{s_V})DBIib9a^|b zTi;6ygQ5y2nsEyQ0kK3tBq|7c7n76InaY;u%N+^oe%+!#+_V0<6_*(O~r@1 zVBR|HKy$;Fwipx-N$o)>1pX;8eCHZAo~Br>GByc}=m(QyqlTw4+HLx`Z8A8u zx8Hg$pOjQXp^2a2eO^xWa%3oYInnjOWb`FawnzqJm#DHSfXl#Wka^m}YA@WBsjR56 zI;-A=u_Nm*dK@NOBLN}+FCNJfU~uL!<)Hl>{EnG!Ah7s8FM)NCk` zQWBj@Q5{bDD|%WjzKlmOs5f6SBbJFfckG{l7m6FlwF}=F_lyZxB#z41^4^z_&>RzX zY9{*mcHI?W;2chQ%bWjdl<|X&at0&l$2pbF3~7jrGi2%^h2S ztRI7_B&qK7l{-1nso z(zwcRPiOzIch-sIAkt_fZcK#}{RK%iMemP39yrh=g3xPcYw3H}I!BjT~mvO?5m zF0eUpj(ziz=PN6x<7re0mSU$kogN7Wpc~_vr|{! zCAC+$RkKb+%wY#yQNV`57`|p*6F0bmm?#N1d69N!R9hBwo^vCV_fNUxGU=+PM&t7_ z8+&w;^0DWXw~f;MGJO_u+tDK?Y@s&niBNiyPXsLZea(Nx`=%LvfF*zd2T6tjr-P2W zYMUn2hKezUwVM@C->qVQ zSipNvi$fgQi&*sBn92_k7O(Wuv2txF-Gx)4^SD5ya&v=I?JACS<<0$0QR}&=Atwtf zIw9t7%$+Y5vkU@_`No~@=5=qX zrB*?-!nku;R2X1|p4awWX!!h_q2uE+iAe;5vgpP7gV_bir9-E>{oh^tph$*SKYJhm9X%2OOSF}1a+7D)`-YF56+BSjsV4q1 zya-#;0LxP9{cyTwx;#FN*lqs7z}iEJc+x|^&C=Gz&l-`3hbFeDtg{hQPmfQaB(-?r zaHud-ro@*49oA&Q#}|YnTDGLpE=Z_StUm@6s?ONEXgLy_{~71!cUcjGZC9PIFOZ*% zlHuT$euvJwgj%iKv32-yQGzOJ(h~aUUe6kRRh@y2^5Cm;FwC80pNTA5%s1 zcY$b-;C4|8m0XFSpVm?Y55x+arhm77=nOO6N3hn`pEcf3t_=L=GMQgn>ekujDdFrR z$to1ZG{~d*=oIsmN?*kB^pzm6|LEv^0ZUk3E80JqW5s2`4KekbKW>0_k$!v$F<*MY zqY$TcxWwh)^LS7r9Pf^3?&>ETOO_O}ZIU@hr|IPlEnD7@v#0pzNn<-#v-knPBouxRz!s;N$ppq)FcTWq||h1Tm;#uVμ zmuVh6k4Cs)8>c%Mcf!4N?m99cTFm`D<$5|>34@4E*wK;A(yHugkN7*JcOTJcw=;}& zE&LVzw-b{RXRU_hMd5~K2+W&8@Z)bHbg`$1&3T_mn3<84oxob|>D-%;!oBEZ;#i6Y z$+xZnbG4j_kx+hU!%nPqIy72E&4~>f9hH*7OA0Bv@RPYG>n-{0*g#uy@tGzlL;FjK zZ38)5*f6zbm5-HGz?ebbO8Nc@E>TWcp4N%jH_3s0RiQ=?%NN#`+mSCyTodV=h2l+vm~MVBhPF=AicKjTEBiZG!U@LYE^cX5+xmiahbYqAYz3xendqoLRR^y~tq zUK8@b#TdWx^k%V|S9nY1l=r|zwq5}%QiCr38D0p%p8XuHO0|J=0wKZNw~a;u=O6W9VDBK6Hv+$o3s35N(CT13r%-R8;TM ztBgpMqml(L8m2|3g~K6H=3cl+k(73Dt_Tp*?hFSsJ$~MG89 zNYW8YQX5wm5>A8Aa}{VqBog$R5Tp9)QgRFW^@9h#mW~gtTTdHy9>0qh;d@R*@*b;U zvM}{V-YpX*1LTEGx^Y@v*NZz@t}Nx)|(fL2)(B14$p1g@Z$^@mwB zqg=%i4y@j6V}W%E!|c`jB*;cqUS06LxSWXrf|+>(tN@z)k@Gmsvfr*{9CxxMWp;jY zd4AWQI-}-oF<&1ip@*|vKdAa1W18*6{HSrMF+M+EvbnD>veb*?b$^*QYcqbs2AZ}4q#x&fZMu7R=-GkH$4(^K@Z&9vGcNLFCB;LV~Hkn6orzwx7YjO z;qhJo|NB-)+;!e`kPe0`R}Jz5q;PPEgoEEz;U|^!eA{=i)H_G*A+xWAJE2k^MVrf& zrByp;{Kn_H7C}fmqsrQ#=00*r`y&)QnhS>AvSnA+8l4ws2!eg%amCn?A2Z!nzu71I zwjDsN9*%#p${6nM812=9A^+-qoA%voZy=Pqv3>1!pd#DT7vr_gi~YOYL{fI#XLk9% zfVysZvh&0tUL0YgljiYklI5zMU6Zs9-#fD?ajGuIrq9|{QMJOK?m-qTkiEVp!D5VQ8 z-Ckuv9}}-#0I9L~U%}X;kn`GlVgJ=JYp}!+IXswK`A3tK+2~`tvf7+%0+{rCLTeT& zO*;qZT$M6bDn`(mgRq*zIlYfWITPpb^70$m4a6o2>#zoVjjUh3eF z8k4%5RcdT@qVA09!&J3zT??DDSY^~KpW|L@y@O6vQ6uH##A-SKmL$1J2`5B>eyIZU%0gpeSa>h;*5ZYhZjqP9lDxlv)D;8rqWK+ojXr5Z;7ORPnPH&w||mX zMwN;wm09AWn3WvB^Bc?6sx_U58{Ff|q3dwoc!59_Y1}rr2?q*<0NGtx>}R#o!a}() z@N+KjP-VYxFwMfRLYtcvo-@Sl1Kw<)fbZFZ_!QP75BV+<{a6&Y+Zplg(g!R7dA@We zBFh^{(S|m#FqRWmPDXbHLcHPV{&QErRZ}9O1apF+S7NQ9Q#bpal@?i+ba1zSyJbUC zR}n#g0p2|KQ4!himMyvS4VIx+ZEk*^l$suuc>|mFrx1+G^F02~tI?+kl1>cUzCaL2 z(&{YYXsd(7;6{>J@z(8aECRYJF&!NOywej0`NJ@~jg&)2kd zz8%3dGRS5mKD~9AiWeuB@%vlTK}JnUUB(qzYHZ21l;$@PxkOJ)(kGFXm2+);N&Z&CF>Pdpl#=`Z#eiMru1CZA!?(q|j5Si2T1g$wR-sa@gij!Gs(EESFzs?0DtD?#5>uYCS9 zVD$n#_MTkdysGSZ8@8@ukO&3}Zk~u^RI8pdv+%Ni6@&UmdA#Tt%d+XYC6o^jQpx3@ z!EnV<69^_HKCNPoVr6B)Qlw|!<#oA%jVjbs$H-wdo)G4Zc*c}N$PXFQRSc@7RnIqkcO|7| z2$rQMzoAJ=RBmj@OQzcO_&Q*KCo;wPf3M2SFQAeK*?h8=J6>?mTEjnX_By z%cVOJ=x|dV{xrEVCMpabT7@9_bJ_%5Zp3O=5&eLh?QA&>Hw=RVe&b_>7`g47I9Y9l za9fl!b7nrtaW}ItlG`3x*(SBb#W^8T z7#53|W0MZ->Fw~l98y*;NMOz;)$`)hTC-^Ev55liNbnEK!JVRywReWZXG8ku0Tqer zmCw`*0@#f7^m!x;|NnT-e(XiCG73o+@0)R}mX?u-Gs@U}d?o^~QiD7l zqPFkXZ{z%0a3vm}Wr%aQNGNR!Jrz|H!L`f5lbS%1eP@F(BhjyI!r_U}8jQAS<5H8w za#o=v=WY%(XM~8U(THAGP4yRh9H+aK?9={>$p}dA@B+b8cm3ZGJq$CQ@#S%!%XfdQ z#p}XYC;1CG4@po!v{LaGT~K~diHOGAc3m;`3qD?{ZtMyF+oGi(4 zOcg-UZRs|Ef}rZp1cLENIS+!k{~T2)@y{WXJ84dwr0OI!<+L#Hc}`GxN7?h;6pjan zCo2xO^8<>GyH3KS37@r>pE$>dzHaqM0BGL3BwBg9nKNf<@JE}6#dFeq_A8V2_us!u zx1ZA9>xCB)zd)Rqz9dgTYCsCe1I`@vST2XSYo|W@YPbYW|La(bWhihpq76*w5zYfwF zG-Fg2g-~I-3%R~)lO&~jb-+Sic15nOt=TU2Vk6jr1qTNYYuA8${FW1i>-lY&TKP&? zg+30$2#;lK4qcMizLjM~U$8{1;0qv`jMPAzZ)!B)7l5C-^8lwZE&9D2l5p|a!i7)A zHs&_#=NX2*w-2V;mlO!;{#uYjcKr0*MY@{X3L2fxe6*Y5bQC+a-4{Yvh96`^0xdtU zoguuqu{snXWD>MK<-CD=b#(mFWNN7OOQVR43JC=Vs43#$3NXe8K&5qT0 zg4KwLlhJcjE#92~00k>mE6O$iV7pzscmvdMfIvGHDtYx)Lp!7BWRF#o^!zbk{*rXY zI8o^uzWn6sA=u1FZlNUh;(RQ!q~G{H&rsB=QGw7*NYX#*BXW`fkh6Pp5!`b?z>cS} zLmyg2r@HHa1l}@h1%V8HtIJLV(ZL@a8l`8MG4Fm(El7jSYk1j5{L=F=mGFPK09sX4 z6jVEt9R!&cagkn}D^G)tNmAkwW2Xw6YhVd-kXZ*BIHvO{oGKrlu7})f&&Nuw5G8t| z?`@?A4xuyM?oP4RxQ7DH_Gq48+RZCgZ#z}m#ES&~S42RqIk>e+o=y5LB0;fSS?1m2 z{V|8#{Q4TVhUab+xF+;Fw%LTXseq%3O}l%HzFgE?E}`=r%W>v6@k--TkG?2cjoe?u zZRYl^aoO<@(uu9B7S*eI0U2+{eIRN#biZKSF4)u{Q?T1kc7=Rzgj(MFdYoDNlOTFt612d55(?vv}t ztB0gdE{5hkqxw#?m1RTWZP;?vVQ*)3(!#w0Ss0`y+Pq#CI-Y3~k<#5Re^lLWk}*oh zRu>mYNNo`KA1`&+YOQfkb)B1!pPl}~Z6xH~LQz6Zq`ZWG>vMUSSY0R+6AatU5YOsV zg4=U5nwPlu{}Id+Qo9QEv zs}^cpdV&bS^75w<$E;ERZi?A*u^;90*4>vU)I3F_o`*Aq#|niD=Ofq$MO`dg)6-ER=N^pG(DD#; zHrFC{BDe)_rI)csi9>atWZ|Xoy{5}Bml~$R7k$$LdfBkEUm9>@7$d+bCHOk?U{hq+ z4Hj_7yDUe$^%gM5Xt@B|`?cLdCk!ONUf+Asj$;he6|BRYLB)SBVM0L&lW8!y8Al=n zrhbOnj7WLlR#t(KMR`QYN+U@IRZl2!C>2`^Xf#y%TfW_0^}n{ucrT)4F_P^{vgi5BJ@`)>aQ4AF&FXbTRYzpV)~?_2Ai|GE`(li zUPoK~22B}?>_jE@Nk4Ri55qV!IU{mW)}aowRTPxF0IGE1b%G%OEYf#zez)x5lb31z zcHf|Bp*hFWw*6LHkXt6OGI-z#d8axJS7M$Jv*oO+mDdMD{iBOTYnfk|>PNHTu1FgF zl^s;!CLPM!trwG|5-Zp3PC}#+y7>!K`%7MWs$z48yU3)6#R+kC1~o6>%s6pdp3MOH zdu~eUd71(=^=v%YNDffs3a5gKGF?Yl!}Z7u*EHYBze4PI7oyvJh}qy@h>{hw?3Bu& zjh>mGP?~x^v@%5~xk9emPqZA;0$4kDVsge@DO}!%lpy!2)&vNYqt{Pdd<5CbwHo<5 z4Z9fS;MevAtx)uY9Cu7R9aecbxwA@}?)B3*cp;4Ixq*6?10xh?b7|cJUzmBm&*XJnRx(Z9ZA4l!*@MaSmAecYMb8Jd#uXH=_ zW1Rg;Zc^o7^d3N2{PSdifGXno=Jxyj5)>D-tgl#aL4E&lw^=-5aGOy!$4Ih1{Pr^ ziXY6h1E;%#xpTWcdSmogJ4XbinR_*>f!JkbwG*~OR=b1FE!E|^_-z&rAzuw1Mcx_aKL?->#zzgf z&}{Zyp1*-wBmktSPC0yJJKm7j^&DbZh-~h&#PQ|@NTL+SU?C;R3c-vIy=EDl4>N+6 zJJz786$B1hJ_|KHV@Z)^!fIsDg9b%E(M0Z1l}%+y90V^q1?ZGhEGGHXS#IEbkeS-{ z>vHjS`r5TpN`}X+W9_B0m}R13ptN3Qaev?epS_>v z!yejsR6p5P$BBzeqfGi{Y#fwrFuR`q=kTw#QrZ6kO0?a*OVFuz<)xaghB#u8rJYL< zFWzacM`_Z9;)4IQCVt13FNVs2iq~ z%rL*JA1ovotXtK3D>Aa(BNROK-WKxVWYC`=ZXY<;y-FWs`8R7$ri@Q`l|Ixn zB_%XTIW1m3qCvSmsMd0?f*`>D8xpC4kT%&bS3~gUQXG>yPoPcMSigE`6A=kX7aJ^$ z_J)c@E}dO9I3SVF^22H^Y6-19JR?j)`@%8j=N~*>lM^+!F(96qC|f)69m)RuL4HzT z@ge9SyBZVuJWQMb{sKE?FF!;%rkVv}E)V0^LQZDiUI2<^#eg*>IRFVu`3vM5JxG?^ z;;Z+LeH&_?x==B{Y1)eG&vL!h8lPtHkr}+_lMeI3Ay~W-|4xTjD1{H(~N{H-yGOH%n9uvUYC-f-hD;X+upyt7cK>fA4hFD&BSf-IB6l8 z$gBHKBs;+=3I!Xm=F}gOnN}=Wdb*a{eGPGxw$yIHUL~Ny1a5>4A^I6FR-Y?*9|Nfq z9~o==GQvadKfg}aYu~zkRVKw^(g}KgR^8s( z_53dt4|}IFpe)m5Q@!Vzxy=8PrVecdKj0G3Lkuug%~fn!y=L*FiBSzU_sa^*ASPZ1??@bdZ4p~a}U zYVd@6ao$fmy8IXmK6mA*3gbEOsvFzx2RAWs^FGrU3E#^Kf$E6OqCB2eaqny?-(%4w z;=|L5*ts*HudMI6{MCaZx_6W3#;*Ut6=;zsSa|t#hcEuH>A6{?XxjV@G{Rq>e_^*! zFw4Wu{xYkk7X9=H>QE*7ur8uub__U>SK0*Ul|2eqqE zp2Ak86_#Pt52F*_B*zbJd@%D$9CM$Q(neJ6yl5alWIrFbDwRs8mVbBide_{{H9es^wgW>m8ke;_{!Ztc)Y?k7tSW6XT z0V|xk+Nqz~c}>S!ju~-OwV5X2WBM?r>Pg~P{+qa4z_Bi_aDK-r1Ce=gP8b%_^s~5u zgBQW8idG0+wfyMdr!$A$`%+p$Hugu$lz&Zbs79SiIq4okPk7P@GPsL$0#`2WRh_rr z4&+rlJb2>$&b(R*aMIQR7#+Y`hV$}$dx3vWjAi&8XNt8$kp~E2fD_AsI8ylB6IJh6 z@6d-JUyY2@++pRXWF`!h`i#273^R%nay7sI)Je?UjJ)~8q%@xoT9k$_scD94rqR0D zzPh)ZH6pXnk~Vd&?LG9Qc(>qcCQGdO3^p(w&Y70tS;e-?#1@@IRPrcjXe=F`?jVI? zgK}HzS;;19R?X7U;ulaSmnT}(*0z2g<EL+jmzP_8kF)_^M2WV7NF_K(q3g!EE zH{Ol;STWd}s&f*{IK|&7q@X(_r#d1+53>EGsrMiVL%>MNY?aQw64HnTNx{kjW)QjH zJ(*nQ-RR%fk;6GQUyR7g7AIe)b4TM}TUtx1NCN-U>Ylip%!+|2n$LCWWQAMh$*bk& zlfhIh_u0T_AT6K@7CvwkCd-K|m)2*?2-KH@S>6 z20I*9O@ncU@1&WTsf*;zMu*j%p(=x)wc^4OFI_=-bsA_XBrVWrayc4-<)P%B`45++ z0}w)GGK>bf2zuwb?bof5UvM4Vt__9WLeXr@ya6ByWp4q&JqycgC&D%b=6p zE~=CZ>xM{>%1<2cG^)78uLi#}Zwk-g|3BSpmb3RaShAsI{`&^gJYcuqQv-10pg1nN zSm4qgPi%R-+8N;Oyj?`=R9<#=>H~E3E**`2rJngr^d4E~UtZD=@)7%n$6y^AsHjXK zDF6_|j8^nGSiMqF-*b3{S+T|%n%iMSydi5&S;f6Y7miT z)rM0G2D>a3LqkY%&x{_=_T3*vo#mim5;@8b2eS6k$>oug1i`@;>ydCN|JOFvw*Gy# z{KDaKk@8>MLV1r{c@sOOf8!QZJctRF0*lec*>TIRigs~w1@L5vbgyRtIr<*C1*vAM znHhY#6j_Bb2J~v>Z=I`YOn)%N$H;+G#Yb{3% z3`Fa-{Xt0hAG;0&O@C{AP*XLWXsD12y-lDB*^GHOGN(;-VACoXiw@}gZ0_pG!cGZ# zXk6&bg;+d>=tuzz@J2gF{Y*|dr3|xmGJM%woy=n-a~RS7Jd1cBu|-PpFnphI20LY}j!=Jvk&k|3$;WB#7Zt+lfAuTE`vbg+^193v)>S z5cs@FE!uG%evng>VGefFhSweFfcGAyn&G? zU_rM!ca%&9Cn9oYTI4aPy2OjL93>Gm0u&#cQhXkMkX=TG))`HCNqilPoHYP;Tm}}A zyr9_1&AKn0=kl} z+`8%yMN>%LIo3-xpswv-+Je9WZoPY>|LJq8pgQo3JyX!{2?YRqrgxj9dig*zNrviheDRHF3R71x@9c!SAM`#|?E= zId-VsfHRi$GQM9-+AsTpf`Vxw7_h&WqC4OGNpW>ANDUM?$bo>v`CQWzD16aPr{XJ= zT3O$7P~gr0Yy!>Nn>YB*o_?o^Km&J{;5dtUevY?wVdWMP@6D;y6`0dP6r52AAJ5?z0-cxnGrzv$qyTKK&!1Yc{TP|B{y<^UWg$s6B)Bkp)YE%0 z|NHj#D1kZuiRDNc%o#_!%Ztl4?JH?j^lUf9a2B>O?)1e?-}yZ`D<_nL+8EH4YFHrz zu%MZuB03WTdn2$HA-}q`wmKbI`LGbl>f@L^o?A(v7@LqAVNzZC|Aj6kHb^Ay@^8PC#UCBWR04Bg|9zGtCot#fV(_u=(K*`}@CW)n9~a8AWc`qU zo#n&q2Jv4nth9iMq(d4&7FY#5xhcV%R|&r+ZGtBfdM z#sv~R2s8WrcBV22%K>-&BXN}F>!+b|)t?=8tbZJt02Gdbx;7%LPMvY5M(yCcQ2He$ z7s2fGI6fH2k;yrHR;zm<+%POszkVF_{D~0$P|-GQ7g;2?jxOC}-Pqt0OHcGU)B4-x z!(6=_JIt@ce{XyJ{uDdJpiqDH^vD-X1zH|D-H9rCsQTw_-@=&v6S)0@S6IXcaxVU= zsav*Ze-IxUy3at05?yC>(($DfO0&$CnIW-Xx|P-cl|oQc=BJ}mdxOq|WVk<_jCTb3 zpmpa z8$yf;2)I#eorg*6@0W6LpdLSEptE|Sc#G)lr>&} zBy>Y$pytS>u6Y$&1&TrI21#2uL2RaxKcmaUpfNyE z#fs3jM_j=?2TgXL;V`rs{L010%7nO z;h(SSmZW^YKSiqVZ`=nXE$gM^ioz6w`#&gz7K0^)53vlIBT9`W6=1bOV8r-&Lz_() z`873Hg}=6Y#F;=xty}oa2&gXTPe6nq^wGg2-~oC^U2++omcEl4YMz2H{`YJs&F@vR z;RBE7tA$&Tr@B#VW(n$lQPWTF7UIBme6#dVFeIqCx9(`*I!QS(n}-v9^N)fW#uS|h zImASYqDndpXoieme%CjbU}!1&$qgiz8Gs&UJSKsd&@=uSVCHVrxhuuQ$s+iWJIo-L$Yk{D<^otUUS(D6LP4hlquQ{8?>>sko1Z0ze#K`~D66XUzxeMI5 zAY!5&{FReM+(b#=>27=dkgGr&7ng}L7vBhwo&jq9^VV&CZm#}x&31T{44AvSyM&Yb zJ1~Xo2hbcw*c$V@APoimBunA6?*kZ=iRm|DqRy-p7BGM}A3u!!&l$+PTV<+i;9>8( zk?Mn?fgU5?#!~{Pzz*%Q5B`JQ8UH7U1LPzC54!I`6SbIAs4t=ec2T6h>z}J)|5C$} ztD;t&Ol3)P-~L@sp@J}>>2Vm~nx|;IY3$5n-?KN?Fk-Z9ym#NMAA}0j{V=Qcx=epB zX;5?9Jf*(;FafNPQwqIFH)Q=VboDajmhDyx@gzgL@YbV1i?PpP3KiecG@B}VEE*O8 z3hb8QV!Z)(k(e$;c8C$~iWajb)%ofXJpLkBC@+>lxz7S1@#=bzZLB;--{R^kuG-W5 z;`>kYbKX5cj&rNsKan4CfX_ba^Sip_-ejpJB6k-LgIyxP+gMFiq-=j$SCVSr$;)i>WJjnR>D&Z#dGo zGa+ns{Zhz7&5i$to#V|}vTte5=j?+CR8HKitqa+ywmF1tF1Q_%H7|N;rT?P$FBlBaqeFcu=ixWaOOdU0`V`saN^&{uL?=d!lvwK$TYMaomcDMWLH?_-riJ;P(yLuOFzYQG13s7`8Z(-T-N70sjrt8wVe!oH0&8cbY3yyC} z4Jzo@4Q@Zh_t^&G<^|foRQKR{Gqk&>%E;w&;o#bW-)4WFF8XZ1{*Ldp%>ttbn@rz7 znA^nUw^n|d|A7y2B2xomXH9Q^`gpn0M~~F@qwgfA_ojb)@A&S^%b;(-vXke1dSf^^ zK}ckR(#NH;IoBaQghZAX8{7}_{HWcL@k%B0>sm&})&D%uL;jdz1aLC{7s2H^UEOHskW!G`7U zV(Of2mCEWW^d}khndRJQ03J|~xiBPc()8)(d&JMKhR)Oof@W%ztA1C0goQA)wt)r$ zA1Juz?tKJWx&&^HK&*puBrbxyv}pT$@$--*k7`K53(%nDg`3**G@)4!#gImdEnlMG z78yD7a@JNU9=5|BZ3nv{wFHVSj7t)JsW31weD`#53<3IqO`Wm*aO1IKZqpZS+xAV? zQQ(u1kPzE*pUN;)$AcR}p!Rx)T0mqZC-C6uNlh97W^G543}^T(6Xb2h?q^^hRgcMR zHm|O(?z$~oOcskA$;is`%FoUH>$v)=)S^X;fK3GU>phibxNK8;P_}zz3rnNJfmE~E z$D?(o1!;C%yq1-n9bdBhZurj{JFycIf&Fay(;zW~5?wP6JWyJ2F(amGZ(VLp%^%)e b_teo#A$ozE$1_6VotDnm{r-UW|3c5md diff --git a/layouts/community/ergodox/algernon/images/heatmap.png b/layouts/community/ergodox/algernon/images/heatmap.png deleted file mode 100644 index 4f55c5adff5703a3b61ac5198694375ad49a405b..0000000000000000000000000000000000000000 GIT binary patch literal 0 HcmV?d00001 literal 139351 zcmaI7bzGER*F8)LNJz^d4Ff13Fo1w`4&B{2l$3OrG$TW&BHb+|Ddk8>Nh2vB-QBzw z-{-!c_ql)dmmm1xb*^ilefC~!?RDU4Dzf-E&u~ysQ1IpDq%}}bFd!%>sKwZrz;8?q z19DJM=uqUPCA7Ruc8ni+Y4!XLFsD4nAdY-zL?u zE-NcGJUrZ85Q+1BXeg#B?#s8%|NT4vwcdLj25}=r1w};(cF6BA$s8S(1mzF^r?~w4 z{UqoZ8AIYh_H6(D#s410>|1OuVySCOq*d?#bzPKNq?zykaRdH&Zct}1@E0KV1lX~~ z|GGo}TDXHc289u_cYxoKQbmP!eZJpwwma*5wxj>|*<1aJk381Pr&Fd_mtt)HvDe|O zXiCdg1BoIew-XHsro7Du8pUFlW8uPJ}DQb zEKNyd1`g*_2pg2QBc!vx>yD=U)8ZtChxfA1%4AC^zp3Pze2$Mf#`9v5uwiVl-vki!0YkucU8{(VhV@P*wr|XbI1O$D==hh<{ z`Sq(aSeCJ%oaSS-#L@3rgZKn80%~dz5a^ROW8xI+?{K3MHgtkk{V8ffnYdt872y$Yj*p1EnuD zHN=jshnQa-W-)bjbsL-TDu490oWWnneyMd+C_w~= zkp6w;74Xu&@V~bLB!Cf~`y?9&?!0th&u;4S$rCjxMP_B>*X5V$CmW+PpUD}YJ27&Y z%tUqQwnPY6Lio48IePZI3Ex0b>nVMI_ zoy(X?uE4%vuyvcXnAlyrFQLGpJc86^68u39ue!B7ld|rku3R@+dVehPX!()Ts&#mB%mlP9zr>qSGN*p5|Le}r8)ZVidx^eMW3*Fy|V zbX0jVq8sKttUZyyXB*zNR%GgNeire4y4KcWc_z>P=y#5BC)hn3o!Z#{<8g(2GcB7= zc}JmgxnXtJv_WTaN}#KjZ8!^Hk-&{;BKU-QzW#&wUn- zV9aXXoTF!K>2K*fC1&f{w?D+hRL;?rzKV}k^Nx3GEdL+nn2r{x8CLEZUxy|aax(rqQ`C8G)Qr1x6;Ir3{lTMmZt=uszf+k0A2IW9%lyx!yI z&t44!6Yr^!xHBRKMn><>&+c9SKGH!sA5bP{21LUvjL!wkw5&JCG#o0zG zanXaK>z=6jJi&J#b{0%WBhG7TqOl&T`aWQ@xN>soo+f0+e{zcFO;QiMlj;8H0qH^% zZfcgag98Wk&w&AoG3LO>A|mKvV9bdbC9(LIRckoAlQVd$y=4JBV>4c}?w(e%2xKGA z-=XW$658cFZ;jgzpIHCwZQupvxZT+;u;f4^atm!Oo~}xoP0uGK5OVf-y4)dZY7$TI zc0PV|BCL2BeL&?;kl=WWr>V#y;60#Y4jolasz%aP$Wc8JiuiSaZ&DVA%-;T;#`?0V zo3%04DXc?I@$ZCQ^uUchHln$Oji@1E#T2U+d!cnl;J;4;o+U={(AQRd11v&qae+BP zw4jtNlw4a2(pM66U-tMsmvvljuv2HGh~U4bT#~KfL|GTq&z|8x0_FlYNZ(1f$*jOG zuJ07-;Sy8zF3m-%>Z1CF7 zQr?D`@u;iE>FhJEP!HX+b_S=e6|UOV-*yJ8@gO*VfV95@ zeSI6<-~MXyH}7`CJ08dWYWHVQ_>KHn1Fi)ay14AybFx4Q|FiyDrOa7Q zspS!)CIx{slRP5BP&QZ(?Sws#StJ^cyD;Ik3k1MQotlHn@0t6nOE)|c9xNr(J2E^B z=4bJs8jYUteZBB6?pUu(aA~P~nXG-{K;TCd@M{R@=fFpvUp(`U>w@81&6s(gr$0Y{ zR2z)&Es9r3lM}$=`&;D`vx4+Oc5BME{0WR z?kpLUmN(SVVg3>02pV+i8?VNNSY0tY^Y?hnqf0R=4m5AKFAtN(gODs9^Udx_e^>(A zLm(5J`XTl8uRM09=`-)uj8j>C!zU~OU|2^Ul;Z=%|KVOD2?H1Gi7N;`{=M+TF*dMk zD#}%VqHbiGh-K}2w*muM$rvmxy@>%*u>H~0Ff~LyfRb>d=Lf}@2eFi~(FFq}cSTHG zQIR@0L?DWwO~Km|FD45=BsnZJMg&F#y?lop+?Y}~aK_!;9dvRvz&GU_k_k^FXM|iN zpl%llp&^iFLc!!1Kwri==Ac{Ky2j2tsYMjHm%40XytqE??MJ4XT^L{E_H57uO{>ntToc_V`xQntf&I~mP zT@a6}<5Hz>s#~@SFbfu1sqv=RFBbFkRI~1!Pel)~?(R+l8ZSA+7QF_OL6R^dk+V`G z+}QkdF-De)7S6IP*0IsMcA$nJwKeWyA+!3 zugk4A?x?diC4SxDW*iDmB_j!GWRWv~#igR&&#u5vQ4o$G8iUHxrIY%n%x%4SFAl3h>Eec8-oRhGlZweq4Qyvbw5tJif75jpN@| zgT<$k?@D&u>tESe3JMz=OU-N_EtNX};ID9#54QVI1zw7q?f$NxqezBG4?U;%gu;gx z24W++XSUluR+?X*?E*X7a(~o;?rBZeejr>a+ZOXTYUrS5C5axwVKR%szh2<<>=)Vd zjChdo!8sT*WORjP1m%c`nElq;D_27T005&=zKzX~9mCs;bytIFFTZe+bSYlY-KOiq z4mfZo-(WrDw_y-DMiLX`o$(x+P=xcy1P`=pa5t^ih11O)-^u6Rn2X!JBk9tV!SCEH zbUx7JuXmpd%ORc-uIl~uTT=&zmyOgHdQo?GvT+3L*b4G zA-#%XA!PTWgHe?7>u+o3h@jK z|5z*{*1BysHXoy8E~*r_s{8W2wJUJs#6z&>l+Dg77qRa@!+F;x2`48{_5V`0Q)5J2 zRn`=IH7WUX^be|qu`(Cemv|H18GTaHa#<^@!tR6WCjcV~3X*-_xZBit<^tV(h9-E^ zMltC%v0L%hA<-3@>|#wS;yZuVE9Q$e-#nB-ZZvsK;w<+E9o<#wo+<>Ufu9LnO0Q6N>K|( zRhFmJ%+}n-#zx#gLIeYivSc$XV%s)D8^H(b1*jMZ4_l4etOUVRT0)x1h`CAO9vPL+ z#8b~?oEnyr^{u{Ucp-#JzY-zTH@M*$7ypf*S@25l+X<_K=f(vZ`{!@un3$h7Q9rOl zIArX@R}O3ln=3cYNB|}kI>h`(MMFI~Qj=WgPvsY+=xgp(eHdXbC&Q7qmUhwTB08LZ zeXEXGa;jxh7zF>tvTT-tW(LNb#cZX^#)C^Nl+s?h^VQb~9E^Dl=r<8qJvAcTK^F@% z`@KwSX0scT*FLN{ODv_Mgx95#HP?ccQ!5%A?VmmFLjk8h6i@nsjKlcQm^h$!_?m;p z=c$f|Nm|{7Nc4HMuxG+H%c7)=Gup1{xK_wk4IYN_Y~=gLpG#nlK_VqE<`5)ZiMgev z@h>kTVGlY_<8J^gd9jI2W8E33`*`NEhB1+cI3)0kek@)Ps-!p#98x@7Y$Auqw7NmZ z@U8lO=HZ<`-2Zn_W0%PsX7QIw(tep-k9!|GTJg_X4PMOmqUD`}z{6#Y+(_ibB8}-> zt+2+2=Rmo%C(bKgWvyJ8d;b@=>a@=zNfyS-OB&+GKkCe3F#E~*=*D&+tqvU;{uO`| zB=TQWgoxClkaSjW#cof=vXxDzvzA#(i23cO>Bu_XeKDVQHSPzn&A0JI-xS#4Cr#d{ z-i^nc9i85S%Z>rzjghg{F8;hV3FkQ_B{k_S5j95%*6?_$V@6ojHv(L{y=cA{CV4bZ z4J`m2X*uY*^Gwxq`5^d=6X==Y2XokJL5Ae`r7GdqyDv4cctcfnGu6>JPDMQ6c(8NS z3jw?Td!#xXFGwN;5QyqjwSbyE^{x%gJns*P`T)wAygOX2yZhMiAI z3v!5*N#>icQ{)75FLzyf}-QxPNIPx%Z#=B@{btZh~t(8O0MuZW2WE|jYBzLvGi-Qr|Dh=ZL&OKG2j|MR_snd4&__zdaxO6r*KPnKke!iUq9_N<0oR# z7SH|ewZLC^H1 zHauzjqw>_$iLqSmIF&w21!GX0P%{5>dOt7T^S(OIB0eLMD;<-$zab%i@-DQxgc`r` zwVI5kBBJ}s<@5aYa{zvF@ws-a{@9O7CHB5EZ$5{rdP8^r{?elrda76u<9=-TAw+B- zV(?4liNyow?6x{{W4D6m@U5291B{xh1AA^04E32bG5Rq5zJx?H)g^F5i?`r!jb?ld zzTcDA4Y7=Te|YNZ8%6}MYYT6ldmN7>A>~xAA5qNsR+~+lp1Am&jhf5J-#`&e@&LXY8^IWJ`Z4zjD_1|eiFEVX8#>aCxgvNT^CZ(P{- zu?{hVb?yB;TGcYm3j4@Yu>bSJYAG>X!o`xL(86uxwVpwY&N%;d8+uS_DQMM#vnYiP zJo@T~ldS-IMT?6$0rX2L>vBBFIf`*=ON&q!&0wMdpx+SP2=~Cn+I?(E>f4--O-f!V zTK#hx^tEI)vx&E(u0Bbor3rQYuoh(=2y_)USA44giz{bC*4vz{7CD`yYNrvOJ!UVT zSJRA-9`mK?9(C{G#W7QOsT9*5{G~pkdH1kur%bNxl*Fq1#$av18W4G?9@{ejlFR!K z4^iz7GOy)&GpF;3+wDhgEo<(SuR8$VzR_oVsFT+UOI)Yz=+gInJF-=Cq?h)wsY}gF zLTEe*`PRKoCud(f8_8i(jsZB*H%+)rQIc)GW5M_Zj+YI7Bx|E1b%Qwo-0 zV`Ys80eXeF?QcBnFv@}}2Rl1SJ3Ep09x~=n{_MNI{Y0Oj^ToQacN&v(*!5&(yj2bR zHvc%fp`I9zvW`%yhQoYg6c2k|5xP8e;PRm(2publ0V4NanK+B#?I@emQw~zkNj=jK zbr;4?=Pl%gRx!8DvY>|oy2Hc_oo)`fWhM6xu~C2-2_4c-$5P?G=}`DQdk=2ynIn*G z=o9#QO@qj|6Al-Ocw46ez!;s;H%3Bttn9n3bhhQ887q291}8L;N2)lC5Z>U7S5^RF zz$6S3`iN{ac6!=pBLwmNt#aePCyH?)97FVE%sVk$m^cJuPU+_j_0<*gTYJ`!l0$5z ztP>{ua=8zMU`$8cr6xuIylmJL2Z{6*F2PKK$aeGmw)_3>&s4@& zuB@RZM$9CAlKaUo4SZNe`BVI-6mO|a_KaY`<60i3Dedy4bE)5k-rV2a;+&@`fHC_} zX@o^J`oZCG4DAj@CL z(cc;bM_CbxByM%=`1-!SY@^3V*+q^x-)Qs+OZ&}!;-JpmCppMx&{> zr?HiD(`~F1G4F^2#Y#L<9(Gh)=`}Q`EL77qZeoJ`bNtJ04_#AK9i^q z#X}r>t`FS(C-Du4_JkI%fj~y$7t`Dae*(odj|SwJH2cGYM5gkZ3NXDd1ILu;^FO!T z2tWmgf{U(2P8=V?&4>T!z;o;!e^_X_J%~cF9f`a6^P6~5GLx*%`?=do2;Y_{(_ic%+ah%_8^CCuKk zJd*LU&fmuBFKDx~We-cOEt`bNO(v(LqX!X@JLuJf?k|tBu&$`&MqdMi5@LcYq4&tQ zw#CRzkyvrnVZx_;dm#RmM^pVH>L({&wDxd4$1ri;`T~oM z9Xws-pgeU$7YJteSkNFG5R}z0AM#fXlU8}Fw-yOhRN8(va|p!Cu7_t;c6^GQL14r3 zik}ezc1stEM2=Wgoyr)7T|2qwon%BVutnIMW;{RjfbX;{&@k?)kTPeue40;fkyhUS zd8ti^Z84XcJYdp;3x|L--k$y-&@{<%$vZrkgz@r`b`5`HTQUtC(w(U$<{^1wu|uZ~ z5Q=_=>GsoAlMiCYOHZbwOEgHHjq3|1)gd>UHWVYWLPCC8Obfon!qGSrcu%azPEGfal=!mvaEQldTL4IP&)M z>0^<_C4-&tT2J%K+~bic9^_`!HocqvWB$|v0FTheK%uacc}(q*T0t--3+E3A5vIL* zD0rYh!Qu57F1&N^=R8xP&6yzZSDl>Vn#3VSP9C>r(aGn~?*pF$j~k9^K%WJuFxj>_ zMv;A%L}(#=xnG&FQisK!@VL@5tKPR#3IfXno2!|g0r>8z#o?}Dqq`LwK)YFvc!n8Y zU3mgXk7;z}EVrEQSM+cQep2^7DcYnzs0s-83Iw{1SS@BU^tY(b1 z+b&L<{VQBNB(Q#DWs9oYPQ-I|K>~5Cm?u13f=;zwPk;oIqoS6!6Gb2_8r2|*c!QnV z4Oq(Zc-(uOi?e1Ep9IoAMXPx}bD1R~Ug@5g;tK3TEfM6eY{Rjm3?wBpc?0flP$A9w zVm(?wdlE9U8ypYP$^;(?%7+QMPBice$!qHia?pCyMBO!!LsCVHDD-ZmX#d=vvs6g| zTS7T*Pxm0piH03$C@_ zr7k6Np>R#&@6*$n=a0{zu(-~5>zUFXYp75d7jek>w;tJu zPgX3OpV6HuY#eO5(rku56uDpa-sj|eC9J3zOlvx##6~n~x!x*p*`oZBrv^S4+DGPDzEa)$1HcE9?z=o z+u;JB8w?d~Xl+G3)Ol$rthmneqI^IOPxP0CKLn$W1W2Q|Sw{aAYkk-_f6`K{NZuD8 z8H|BJBQ@hhxCj>WQd>)cnS}+9Sumh9?*nk~;Bgx16-79HdUgsziwUCelYxlhmU(UH zw_=Zww-s4;^bDF|IvubU6Y%r{48ui_?^y8ab=^P(*v7`jk*K~m048R9x26?%U+H95 zSCgjbn1INSn0LY-jlKS|1Fqrxp&YIKw)kamaz;aA*H8uHi;_1E``=q`l6K?bL4aW9 zQFUS|0-Q^x=5ojI_a1Z|SnyxtTJWqpx6qu9Pgdv~?5Lu#Z~R8==w8S;{&**&aK(w8 z?nwoZ%gAkub?VO3;wgID%J8<#$CBNxsGg~o3PE{l)`pV|69m?edLG?RPIk%RJ*F0C z_+jhZr~FyiRqW1LHKDPqa&fNOX(3>G#)W)5=s8euUsT-zvk%X#L~ET~`Elp->VvLE zh-23R2dMgRHqO-PgUW#SD%!=h2va85mF3rsZf;3HuSU5o2YLw&sVE`s^V9&k|LR=3 zsK#J7*J zV-L+M2BXQUyzCUyDP$$nRmvIamct9+j|%^0^9h!0WN<%6ju<&~?EGOve{`g}{QFeb zY3c*z$QaLvlgAc6KtzC3&&CWDJUNY?!1~ye0yF_CCFN781$jhxH+QLUdU|vJw~qMn za3q$pswy2xP)bU8z|udSeX&^OZ$B#t+cWj&_B)g>Z;c#8UjW9wtc?ngI?k2xDOqvr@S-@%#Avd2=X_?xgudZW$Lh*ijQznO4K^mPStu z;9la3^dq!j==#pR0PmAANip&)q1-it@ky)i-Gbt+9rwG(oxvXi;eAsJI+beH=0KNr zpnByqnS`X1va+H@hAFCc^m>7wQ7Up-E_--2R%w{?-Mo79AUi={S~s&pE_zkEvho`< zf#UKy_tREHYa&P}pjOsZ@nttg+xroSqg+MY>a~dbp~QtxWyEo0lg1*6jPT8>WVt>~ z*=s?CvxC_nb?kIsJgdUdP>FYU^5BBqj?X1x61uvkr9F|o_ahBxm{(SM4Tbrh1-FFj z&xpI(AxTL}_gZ7T%+O)|r|a`b_~PD={CQg>1xfoB-%wLo?Dx(9 zVn1P;om*i%7HLJ_z>i5UJ zm-B5b7~MJT>v@HI==TBH60UAZJ3#|8b4rl~$0~9}6ip4POB)~mI(h0dCH6Lgs)-)I zSR9QPTrWQe0w4zy)0o%K>pBq=Yf zIFLm>SX|$zf9g4VTj*ClqEHUcH%c8=5LC8UB;8Xo4?gpj-P|9w-_>=9qC&?Vxn5i_ zDsXV7dlHi~WajRHn;x-bm*quN2XVUDkyD(b{{C%9B)r9R)l^7Of_jZw9rU357Z5Ea zA~z^V%ry?K56-;Ag;O&Dz?WEFGT8lV>?Z_r;SUH>+2c24TlNFQQZJ~k%MyUek>9ds zV@4p(@%qg|L2X7eIiu`=#QVkeYdZ>!72xe9trO`W@8+%u@bCtRc(*Q56Qj$6fcQ2E z@Jgpw&lfGvc>#A8 zT45jB^CkUBb4R(R!%@sJj11bhHox-^G;4H~qaA8Jue=09u+?kVqvWwO8XlpN&{BVS z6(97s(k`96fq*~1Z#v?~!SOS(>|-5X0a^eP_t1&vhw`2|89y=|c0XY|WrwtN4#?lj zX#7^unzG9N%0Un$s+yb2O7lpD9O8Q9IiKQj)^F}a#YZMeo%#f*3m=@!7kPl{iyn)T z1rBdb17(x}3MgsnLUu}9VoxBRZjp>a2!IASiW}b-d}e}LouL}F-P!X~!GB&L`W8DB z8=*FSmzBjpitD+Nu?*j#m!%koz^g@`QU0u67k|Ds@EafN6_4pbH59;{vtdQfY-?hK zuXF)DC!%kq{e84M9qpKA3qcsFl`g-+w!O%l{5VZ30VRMQU7cP{5L|~L=`gxCqwM12 zYh_zu^2B*8K@zN|4NTB=qyR&Ro&_SCRz3l=>KM~YSIK150q~*cs<82iRYt!l@IVV2 z72jE&nuZfP%Xvk|R>TS&SKa8%RJIiXAdOl~U)U`&?EU6H*=?w-M9E_j!*4&_p7=~8 zHVBMGBm3_EP%Hi#S9`L!6ak>5Sg(AaUrET`L9w8L&**7z|^EkM!^k-C$f0Xx$!H@?wb@yG%Wdg3=)H*NQaHN8mZk5I& zv}ijAn;)jRUeadS@`&7oZ2|vH`hkqElxJV(EBZ-aCIXWyY~b@moXg5Mr7sRI^{Q7H z@E$$=V76Pk|B4B+;re2;{X}e;Sp{}-d3l3-*A{y+^Er7_Pm?&WEe9JbMzy1L^Sap5 z(&vmeGA59mjeLG9Q7NLo96pA6WM;AYTwCOZZatS4=%1E3T6(JBQlw+V932;(XK5v# zYFp-g7wA4!-7qyOEuSDhv!3#}D8jt)7VMn$&A-UW>=oPFQrffEaQdhYI=fvk#CH3L z=i5->C{Y$9ng4gI`U}kLJp!5HQMx zSDb>Bs2a3icqU}d$O{|q2YqwEc4wha0p*jX7<~^~;i-1{Bl9UE^di$V%8x=>*{GX| zQA$V&)Ic_wVq6mT%3to3Xs+Dwfq%(jU?w2xI+yN+d1Knlp1q?jJt_sT>mz+faCgZu z0RSW*t)b_o2uKz_z(OuQ6PWq~+MLDTJz1BlSUs-eY%c}hCs=Q;khErwLQW~g0D`-` zUN%WMm)QhECfNsbs|S2iwtsPUcC%tT_hp$aPw&plAr{)UqnZ*#ACesSJZAqQPSNo} zv^)}QNtmADqkb@#Tt*NW(tGiAEfZ*nRAkA{4;_xd?Hg`w(GK!2WxBo+9@(5c*tz_< zGP1;<4VWw-G&&ouwq%iVcyRQuvOCzzP#24JoN})d-gg=PSpYYyf9&g;II|}&i;ruU z_$)(H;Ce5px5ott#vuf25(`isMjEhBu;7R5IfsOBR`CS^%4Y^rs=DuAk9p)(ipCmT ze*zKgf9>s~&+3?$F$mm-V*sSXq$VHTH=(XRm4WZgM1rD!OMKD>ppl6D{VOfj+dm(X zbdr%KcKp7v>rZ0s()J}tcn&kh3kC+X_|uG`!bs%C=f0qJ7T9u{Y73AhenrS(%>q^c zJOJeC!doO57(#H@+$S_;Z<4f2Xx+#bSH_>2PGJ(~CH8_y4ycAq{gu|9VaLCD{zVeD zb$;UebXwC{386w~S61t6dp{325}tgXTQ8~GysRvL0{^9DibES)4XgEUThF%%1fM!8 zK=JUD^LeyF1J@*42xik*Un%8bz<+H*xowXUolcEIf6Cs)#)CfL6sDeiGJu`@8Ry+H z7>h`PhSYXHpa8%W3J?WOl4J<>e+5GxL1MiZmfCX*bXz_(7;$VFu zju|25OsSGU@hO#)IBf=q5jD@`gQ;`m$%FHh+9mFDSl7>$BdZempDrvVC4=AZ7&V>m zjW?IQoY0#L+~p8!Yqr_n$QD#QMt=Q){kBo0hrCWW?ia{VUQ}`*4&fab5{m4d=C`5! z%4c4ZoRBqT?&PjvA3v_^^?WXZof*?{ibc0zIt; z$>2Hs2ZcS&o%E^I-Y4`bD*~KzK=~M#)@i12W!ZeBU`eBq@IptbyA_^Sl-dX8mQ%tr zU-={8=Tfc2V4f|HCuzq1(U%k-KaATPMu=v9xFZ!A=@b0}sm9F=Rdhvva>xC6?5RJ2 zZ%+^|_qc0RnIf$Bx+EX!7c?sDayb>0actogCQPqgFR;zdo$H~7hU^$YGhYjwi*}0? zIN=1e3y4Q2OYw7rq|OPa5ytKd&W>q641-VGMBes{!Q_FDjYZItpNLz^BQi6dkSQY0 zzVi9qhrd!9XvwwQ-lT*LcE3$_T5aL3MJ`dQPtraV8dL1&d9-I!Mq1Pn1fB_3;l!WY zuLKl+zLU_MLRo>f2^x;-B&B@* z>&ADje{hr>Ag^hf6}>?j+kqTFmsn{d@?_dR{&0kCQ4lz|X&>bHeHs~NkSPnjA?YLu zEV`CT&Si&7aC~9moD2Jy=s9-5b=a51Sha-lbU--2->G#XLRp_X)O?EZ?q(LW zS&OIhUAC;*=wV!G?*Ay@mKSB)q)(TkrOh6&CAUeZo(=*!(g_oqry$&U=Y$pElos^s zj#5oKBgR#i=114eH9c3H2f>EoYq_(EgQH?F+4r3xel_huXJLeb(|5~Ot18zUj*y!IV1Xa<+Wk1E0wS_}X zhUrAtUL)L0(An%JOqX6L!s0Gj3U1$rCUL&?;8w&nRie3nq=cZx)Oz<%(t9NmFhabT zA#$EIkq8yy5I@eSUeI%5se}$X*X@rmZQ$RGGx(Dx#1- z7G&Auk9@|q^!m>EupDSdAYs$87m76wH>_%UN7p}N5%T* z4Jv~=g|L7AY1wku%JbgEsc0mfgHHerc|DP26@GDZfGje96;WfNJYFu#0>V3@TaJw_R>CeFdjaT?b%*FTo8=$tJeFmmOd_We|43;8$ zplWy)f#O(}}j`5T*YO9%Ff3Wj`37AZ4(##i4C9Gm85acQFSo!OFJ z*zmW72gQ>ap}(&ExifA0YfkIY@S(Ad&vC+;COPqa3FoLF(jc$8jr0l=oG2&cPF}() zPnZZwSYbB41D#clscBPTxf(jA={3{w9LZt~&E*c92zZ|+WaO8$Q7!BRjZBPbc-Iqp zGxerS@p0~TR!ayv)LLv!|1O>FRhlMvvt*n0NhtgIxnRs)4H_G*2$rIuYJu}=3j<)- zgeIN#Jk$VkG*51Le99%(kdaYr0j^5dn`vpS35yYX8n&kyMaXV(GN6MO77||w%-Gcr zrTDZ^p-BnZWbC4l+rcFCi109U6go3gZcys3~L3^nXH(* zTc)Cj{GLSpl71Vu5AAv#vnNQ?`X(fO4}o6ksEcTrfW{yM}*#fJXGJF2G>=*P|P_s_++c5 zn~Xnv7~AD=BDQHA+Ssc+7u7*=F9BVRdn5WfbU?4DYmtSAYoWM2t7!U zGVuX@pg)X9d%xZCSI&9SoU_LgOI@Bf1p=Y-yYQ*_i*8bXr51sF>)-%*eP6ah^=t~B z#C7F-0U8h8sZPZ1choeKEWs+3ieN8^9Pw zt7|vG9oedJ@mCZBFVW3xS*4*{9tHA;1fe$$G`& zshVxRJK$ockE|Nxnk581>$j2we6PH=RXH6Rh3vN5@4gSXS+w_+G#q}C);>9U$tj>| zuK7rz|6RxQThNYu@W$s$I*6^E3lZfd{ivp=`NFajp6BOrN3UK=IcnmN6B!MI`g%U~ zk9L~$E=(nIe`P)}gS*@OufI62KrcAvs)Ap2H$3lqt(q!0=g;SU4p>M!;rrd@f6PB8 zB&L7C@`n57#FT-eDJc36Z-_kI2g2V+wVnmzG;DIM2zmL-~{DJ}*b? z4dUn5X55^{*_mr1skItRkcUP7ose8*a=_t_J7R3>)-rLasSYg@hs7zqzQXKY{!4Xh zNhS=Pf3y!V_O843tpMnuBXZ_JKtwTpun1s2UiDs@R=PRfqdIiGLC*O8S!=~xpgBK& zRNa4DECo}e&aQauP!avRq;``+N>}%a3G<`p1!@RKhJ#ip&LoI7C;!4x#oAR*Xc)|2>RQY)*4aS`MwtK8c9Bp-dZar z6_Y=1e8bij31E>&O6-yeFsT+dJ_<0D-&^9RoBf7F1HX5PIE?hEu_Q8jeFR+kJ|_pC zIp&`9d$_XNC4Z+i`kG4a>rV!G!=)G-;>_k%+hhy$VlxvfK9!Lplcil8NH7b z0oOh>V2i`&@+qc6csxbw2j0!2+JmgCrmYgWcK2N8=O%uKGBo#}V=t0($$JnzV z4q0+KxS;ZCT!=`~KC4i4$DHvhZK#>MYS^Cdc$15WSQRnoVgTX&))%Q`x9aI|Iw zV~T1O{2|j57vDy`yZaJw?{=j*3#n_8#Fitf1gJaiGb*+6`Dw+SdTC3G7(~oQjICWS zu%D*nnZdUB%(&G&m%47Gp1<^~Y#CyXK*sSyJtnb=i|IJW-OL)j8Rt5Be?G{{^y%RS}zs?o!ARiZ&9CoFA5=i zM$RFIAbZnbW@eVlfqd3r4i4`o><`?etyB#B`9T2+#dI4T8=D0#+2%IS{jh$4tCfrW z98d#?AW!aI5s?)739iZ^N)w*1A_K!ZC>BQxx`F#=9H^>YqnWi<^aV8+PjPte-tSA> zG~}Nc?te#)Qff2tBf-%AQ~sr$78?Be*TrQ@LA8s5`SX6{-;KVTy(xmSjy@p{8L$Lg zM$=y%D2FnHisWt#E=3^Kb2XN@RzsiV*NcGLAnJr+yoC!r1a*C@6%n=Fe7ajl2nO93K^8W$>~YXTm?Jo z$qtUZA5Bgg1Ep>P!gJhNL3uCU8|pv)A-9TJz6V8M__Tqj! zRtUFd)q;-H3^^i2#8A|5-1v+Z9i)_%F)s0#9!>VPb91`-yyM5|BRzxgNdA;u!AF;3 zdF4CUCnp0h;PDBq6hlL*c{vag_xeL84{scs63#c%Us}xGP?R5qx~LE$G~cn> zY)|44)T7D~mbFjfD&29z9%#)=fvsMPGbU zq^9icV`Dk<7JO8B>#bqUAJ~zfeaJc$MT;CU-i3?7 zvoH7Qd0bdRS0(|5Kw1A6U&K0ZZpm1=O)551%ms*s3v%B=@b z!N~E3($=mP0y)t<6wqbh>zW&&4!WZpf0iB#eHe_&{LA0~%ugWsn+*#gVe_Er7WVw) zsM^@vLiT4gE6oEWk4q#tz89wK)u}8Otef$;Fo(A|JMsg{?}Vjuui_2S?%R;-jp*J; zKY~5;OeviKYu<|F#C?Ngc5Xp=yk(W6*@p}0Clq=D7ad63(B((A>d{yIep=+rdEjLp z`{^$dFFg}Nj}71K%4zht9QCWd?k|YRxJ&RV_^95V4ZcQ`ObwJ3ixR!WaTjtvF%p+Y zbbpe(YN`f2i-X>{69s*}jhE=jsr#$e@lJQf7b^ZVFLb}U+Vpl;X!bEkC8vQ5z%++i z|FMS;c9HDycJ~V~gm^hKqJB_XAVzO+6Q$u^((=cv3oMtXDfzu+=Jv}m3Ckqd8NK?> z(y}6$LM{4Sua2dm2C}Rg?fmhC_riX+i!urtz>l%ftojyifMg(O*um#J9bNrCY__9` zs+jR`tK26Es?8W+F7KJ4{D_!QWS2}&FSH|I8b>f}dD*|Xqz#oob?EjJskeJ5jUywU z4_RoYqvlk6>)bFfbup%vzgIT;Iv-X=&$w&Z=-V1pj_?HV3;|0Ki*`+~+9WX}>zXky z{}esA(Qa?bu?-`r15F~Y*-g#;%Va)2V6KsR>-`Fsc@+-27tewilgB%w?Uu_iN4Nwx(^p!rkoJ7c~#xW2doE)cLtbPLPs ziJL+_s2%jI6&2A(ah}l;>M1I-81+RY@s)=R1_8KxgBsNv9A5lzi31C`#37d|Z)M{&G-+UXWRM_YtHqqep{ z7g(*so0$5GfFlWeLA1(k6XkJLXTY?dmiByblQ)WzQdqCjVtB`|tQV(acJC^Y6N;Iz z42OUuPP~f7r2mhuw~UIi4c9;k=`I<%B~%*eh5Fyz=C8R-Gx@!caLAs>7 zyE(7l-g~Wcew;t7`N5j^dGC6z`?_Pwg6p|8K5W3!3Rtt=Zx&6S5B`1z-QRxzaX3>L z_&py{0j;8F#IqK^90$ts^Cd3}-1k{k)d=X`aL_vq%lZ?1XsA_Dqd-#o0|z2$U2{K9 zJw3mZWo{~MWA%0v_!dN1=7hGWqW5ij1b<_4n(?#QS~T2?MG|Qh8w-H(UDVSV!nQ%@ zE4^8=katEMivHQwR=HUo^G;jZVgyHK_Dbw(}0D3V}6`@Xp0BsP#@K+{g}*0UnZ%im35 z=^>;1)e%maicKlrwUrI@d|rp$6C$t0#~8&c=OiKl_#;U{C=ACSxi?Sc!6lrImyoYE9u5 zlUquqHc=00D0_eZ<#2P+UFlU5-@k9Wujud3>4~x^Kuo2Mr6Tkw{qFY|)9H~T30Ic1 zk%Wcem%uIO=#52LX3L{sn=({na0;hO`wbW}?#7e)$JOPyw<+^rL6tLFZ+v0l6(S

2K8o5*Bwk$|GmBo721(8)Wu9L=!C`~_Kbv&PRO3Cit(Q?oAC*x%a|+b>iB10(?d3?oGs-wPnE%&c~a<0Hi zzWWk}&+R5pS@$fpy*@Ph~VO?@znYniDzoG)VOX!f|?r41bkt721qQ>b9i1dpm+Xytiw z0gQV9O)YRuNp*NP5y(LY24vsqHDKE3{_UM)6=Rll!GDfEf5fP(JQ_%Myw+3tqiV3i zg{OAX5mRN~=H?uF^2-qehBPqIcdC^elD z`Y`%RsU>`v*`}l0ryHFb@v!4flv<%L`?#T!&_)uDO%Vi)R=gJSR~$soZ!S$SUp>7> z9Uoj;V%|G*HAD_GUrv$Jmsj+sM6PKo@`smyV5QCD?JhKUiEW9F=hWwm?yLQ7HPC_e ztEb;#V$5oPF2tAneNB1=-zPy<7QubAoFf(L`0m77;M8w#^x#W2$FUt63Dg^-iiq_3$I>cV7J9 zsr&QP9m@FiVdnuWepwpA7%;O#XCSw7B2x&`=ayo>+YgR8-tUr|UQl0rE?{q?DwqU5iR zo{eB)*<@~66=I;Y#{u5D?s@IQ9;+wX4fFe|%tIv=L%*m$HFm^Z^IKMm{T;iprGH%Z zc7E>5u8;r058j`1y6K&L@!mc7mS00dOhQs6Dbo+9II84IC+C%{HNU``r2ro({!ZYA ziZuK;L1zzYzYZ`ML8?_L9781UfK|dk2waOVzu5m5vjVA#r1zWr(o%#NtY1K%(C#mX z`^+46+b>%5mMe^v-+N)hQXrC>&y8~S#|9s!R3SIV%U{laGuGHI3uHz*heqD5%1aA$ zZ{Pz{+<^wI?lkY-L5J4QNIk?;-zn6aonB)HRaP4MM~j!9Ei3?=V@NS1)kw@A9b&$w zXa(g@Rx*54_@2X};Ml_Yo{b-9(qJwG$4}L02>^Ftm{vsQR80bqyJ7&jYqt!L(Zee+ zFK%39{3JA$ev$Z%-}zgpAol22RsnCCn%dvvkKq=)WQK-p@*1gHGBZ0wM6>b9R}87x zV-9bjF$R`i^#cR`)O@#W(|^i1@bh#07;Hg6&lue}StQNPp~4*{p+dC}`OEh-vKJ+Ev)evM7buwAT$C5DTnvZt{@6>02<<_<>nOAW^tgH~?@$ zdiu^3vy~1~CTb*5%y8rLkg?A;W#o57!);Tgy|S2Y$_Fc9KuOnRz#9i>J!n&k3dbf& z0GXmf24x_u@t2yxHSyYb^vK8@%XHF|krUc#2%?>5y6rF+jEtSLF*U>F3rZx1=~f}a zza(-#K_CSK?De$TxyG|5r!9C1q>z^+A@8120Pp;-j8pggo+O9S;2D*2gK`Z>8W|+{ z+=WvGW;~e7!^#o_G_mmW^VV5Z)&7dhqNXMu-d~xWo_i6^%n-mH#0@FdG2WKh8LqIM zp3XsAT3n~5U=mDAA-A^{9L}4*)j#(?E*2fe1p&3b*UXx6G{6?Bl8=z_3&t&qkP!Dw z6}+LEsRqEgs=*>^?7>o_JB0ja;P1o(6xwyh%73u=IjQp#t^97^7dtT|(y*-im0^O=S> zO#rze#h|)g&g@gE>Wia)qKLeL+)T;=$(|=L;b)n@3IOcpe<+(jtnJ3JI1!Ybocv`Y zhPT>o@x#C2<`ISF0F^cju@P)E_^(-6G4J&n#$5{}vtXc~=c<7)+4g51%oqmM{=S6O z8e!G`B8uLl0?Bc%U0Dj7kE;D0F+G!#K7~Avvu%=ZIG>3O_41%LzfGIA0C5!hylUNMm#JuyedPoP|%6^ugf@&$Hvx z(}k=IlJoeI@2bv*j6Y8byMsj?*y_V=Dyu?AVi1@A*|hj%i*u<7@dW>7F{QW}yd1^i zmRADFa)N-nj>Z05s_~8xNnRg1YoTr2m_o%;ywidAzT&!|r_0S$O^X+IN(9Smk|+pd z0D+BWjbB?&DI|ZxV5#N&Mapc8=k~!v8aq`hd@6O?9TxErpK!*}$ojW2A-lX>7Gnj z?Rfd~*LizqPlOBTJu+1&S+Z5E<3TWqknEhSQrQbZ)dXbO0@`G?{;?NCDSZQk&Hx-> zVOJ0Uc9lm5{rjVxy;=PFQxU2VyU`3Xgf zbaIqR%*8<1HrDXC2oYd003qUJeEwW$&~2J59G~%4y4th5x^=XO`c2qR-x~{Iui2sB zp}7fAVC-l#1FQ*d?(0LiZH?U>E44n-ZeK}FcI6!%7zj}G^73j`W>RlbZf35NBErSy z4G?2*Qd4GmB^HUEw@qsLx?a_&FT0QzUvf$v%>zXc6|`; zr z&Mkcvn-7OgrrqqRfxbSYU^86ABN-#$6n(9_lRy0TKA`|R-0VPZ)iUTLhdF%U?JJn*IM zz9t%mwhPOJdk}1I2eNaViJ5N~qhdblH@i(+&4|BE)SQ3mkp>aN8;+K$=mOd-87{B!TCHE|1y`Gg3R%JRHnYwG zi(L9C)!BvZ^$LP+ANV=mTZ=sCl-FWO<4cy;h6)a*Xvw#_@7v!03@(`oA#&ZDPf6nxlf$VQLc$m(wN=3CS3gR_4kC`7@^o;5$5?e|B=;@9}6vE@ca ze=|C|PjtNKIGDonoHHuFnkJ7INwC(LD&8Y&{+z8JLKYVnXD7KLv^8k$kEDi4yGXkA zuZ&j)d?YW;Lqs%@FLg^c`zt27l=?sWsBm?XH~Xjsw?RKQlzQftu#d&%cl{CNEHA+j zWzP{qM7=`k zVlIV2p-RT~BIrd$lmi2|QdaoA!5w(@d6jzqZ2$|Vf_G*vvQQ60w@{xfL(Lj@0vqVP zG7=@RP-k-kb}Vt5S!6@GSe^*}J>FX9jnlQcUwKkI%kSoostJlhJz4Eq!~kYA*sIk7 zX9Yb1tV?A6k#0trlrI}Gvy}n!q#F2XDKdnV<5q$yN z(sGY&pg!ap(C~pYV6kghT^A)nUZS_7vvl+Wp&aIqTD$ttqq^gn@l7*=8hf}v@X*i7 zy2b{?mVm%|FGgp8vU*M|qPs%P6Hd>@*GPFxLQaJrTanuX4+tWNR^q-ZI!Pjy%+R?xiP z>1&HWBxw{kj_tMBSN6@-v|5fghlP>Tzv+#>H~&HwnLHP2|fj*pF~L+DC|x+QN2?;bdw}`!tLMIo1%v`Rv$3);~!PgUB7ED+x5{ElinIf z4$n22a*l!nS@#tn?U9%EBJM+e0ZiG|fX&IGsvmi4bOk#0*})?|yB%1*in@3a3~YhZ zL!oj|Lj9zWtZU=1g+Dz_!_R<)P41(|m&6_~1(;;Lfk7sl?K z5H0az+z*BA+8OK*zGd8@Q`aL+}&lrSwgX5H2!t@>WQ9r;9E{NJY>3F%wdyL!8ec{FBxRA^0Yn_$zV)lcO z(9GuW3IENCi-_mggJEb_mqlIFK66av7#SH`ZaGwlj2ji(5JyBbV4ChgMN0aJd(3Yh zA2+`Waa`EQzfH5Tj!DJvy3>8Z?`+);70nNSi>NbW%Ery;-WnCQYgpOzfl`{Eiq3oi zd%JAv0*BUdiWGI3v4OFoLI_*#$?TQPPXgYnNA%lJ5lkB!lq}D;(f(ku+m8bo7~@N6 zkpZXu@!!r#+n(%0qg&5tqGcmAw#5q&A@L)ArknIxugQHU#-}_%MpQaz)gI^LECTif z4`uZqE}a8)+UiE^lTAaDc15)=^F7aj4Rb0Vu+ZN8ZGzA{a zBE5rWg8YcK6(IXN{y(p8fH-jB#53 z%4vsnjlYQPE=;2fu^nijX68{>ibfBl#iiF_U0Em_)KKB6oN&D4INurGq6kOr5AwZw zC5o2LO*Nvhhl=Wl(45ZJ>%EEJ)Z~6xkJ&E0ff)b_ODSZ_()NLumOi0*vn`_;HzkM% zx)loP!KUIDE~I%q+j6d{c`Pp0^(X$fl%>6*q*#~Qz=$vW%8EzNFSEpsH|d++lDkJ1(2qaP!$82l#smb1k_J58GBZ{Ha}Qi4$9IBb~rnX1DzIMsa ztNsh$meokl^K&ZO(53kwpK^jerJ$5@6O4`$sHj~q_VgI?YDS3^Q%&La5*n68?opg| zj5SjI=8NL22P6yq1f0!q|G?4d8!B68=%-|j!cKA3oPg>yt@@03PfrTcgY~s74-AuJ znvdRU7KUt{znFe6_kB6Vj=UF*m^74;y^LlWm>W(TdI%S`PLl3(3C+(J zP22v8B7$ll*T6u~Tt7Lgh~|^VzkZ9q@J*PmhsbXbDuP+Wh(KSEc56LWd5-0=V8yC8 z9_XPUUlr%i7X>L6y%REvkTtcp*Sl4f8}u-I6FzZhTltkEo?_VSfZn{Y$}c}z*cmF> zQ&=}{Fn>@^eRkwKe9+I=G3!!Egg$-8kv&FXOb2e2z(BnkZ?7%F>7Dti0<11Xb_&?yJXUHWfj-z#Z<40sm_%=JG#eSH)i9XK^! zNp==js6GwtrGR+*}@mF{GkbV46Kgx?rONAK6#$rv#Yh}O(f;P1j z0#_x!d>K8kX~i7u|Kf3+KWoic%#Y9NlBA#+16kR8^*r34(7MS1}M)*F{Qa+Y-YF z)d`yFK4M zsJlquqdhHBRB9UBby?O-CuOZi6|wQQ!DtD?c=%F2+~SPA-y?0C;KJ5R1qd?1MuFG6 z^jHV=0)L*Nv^0c#t~%WrzSsL+;O3v5hYh0M!u44!*n=J)u@1sl^W#MJCm4}K0Sy-P z;z8I|v_ejLd!yY7s!ps48NXBCD8LjSBjqxj@38xH!>%M+L-N8Cw zHg?mui$)b-K^IWjMvvvPw7s4mk$KBuYnw%*Cj4sQ|9SyZQzVkEUzeBLtx;Xe63b5N zkum&gj?A0tr2eYj%XV)43d|M|?mx?(6J`k++dv638BL3nJs*5C_6YBnKTBy!N)@T!nWnpk?w?964g@x zJX;_^XV`c?qT$aQj=fZnP&P$mmHFUe-iuj%q93!d%?Y~Af&CMUXz+QRMM6%_-xn`S zGzrDj|0Zr4<0go!8`%|wL81DTJU<_yhj%5zpRohDvWd5c{@d1SD5co zRs0Tp&EGG4HBmz6c;_OBB@7k4w0V}=okzUoAJRhVPPM00A)fB;TT;gfMtx0$KS{W-M z76zQ}WK1{R-;gHi8)7ExY5*TPU-nt!VXJ{$?731s$Em+XeN$C%g9#g4_f(k((FZpF zcFkxm*2H$8hcDi+Xdsf`;&d-BQ!F;tu9YwF)IH!fxGzwqpag?i3PIR|Zbwg$QLSs- ztO6{EY1U#)9f2OlRSNGal^d2tiyRHOUm4RqLfq@8;~$cW=0aP0G3{N;xj8Gr)b$=I z^|xjNLt}wiVuFbumxj2~->~`==(if3>xSHg_VlIXKdJtX*V2U(?1;7GGtVFwX?o`J)ex;%xVuU>QgC?|Bk7RXi+6rQ&@A)|-+&e|w-#cg+2v!%XZHlYL zEwO^~?T?UeP}=>&Mt@vzJUCBhk%y4`aD`2hI!t0ApeIQbWP>T~B8-q%DJ?dP(DWen zP1iktFdx@sR}!X>AER9!4J*H!hK@tZXXLWP?#Kne#B13ZN2`D*(r<(&8Hjn z$WJB0xCrn2v@#O1VPH0On7(dciL%|FqdMX9lV{kj1Whs zH@6h@I3}-K!?=os44x3P8A5q%W-R%u$qq@~Pf`I4UR(LfGRc%&+<4yzHL4lU`0Fuy z;UPF#ng$4YV1+dJkDqAz;Lzlw3(cgXRAnQZ&-|n7eNzfq2cBV!|FV@y_8pu_C?G=0i*TG-R=*$HY*M!&r$s~aU^!a&|P z$G?7Pl!=k=QixJu1)3;#k_snr$$!J(aL^P$^l?8~iTP&V61itjj5QVmv=VSmHC8Ri ze~V^!@X}26Bf;Rf*S!(j%*PFufCi>%^`%&$N2sVJLpyQag(`JvqdzBOju#O>Wpfl?YOxtY zWgMrk7FRcT4+goSbRl(EeU1@|v;=QY?FS5({6C9G?A&UbQttn71%%J)O&ceK>Vq63mPwaW!w7L#>Y zK}`%AUHqX3T{BI{J6O6!iW=;`;9&pSPWtPl?Tq4)KV7PmV&80!(og!Fe4FZ;wT+#p`aYU5LD0aUK0SlE* z7pJ^N;)(N!OfU~jjevc-_pF>M~%YEUgc;*@s>j%NLnv?JR*+5IXN{&s= zCq{$Z|K`~dv*u%%SgOgGxUXL`aewx*FCqiPF-xgCAX@jx@yRS=RUM?q_h|Y_aO|nH1fUzeryI$$Z*yY zp5EQ@{1;i;0;7Q&K0MY)-zMiDRrG+V6^R zP2hGkjiQQh^Cj!o5I9DkFN8An5pV_N$hdFJut~m!OJJH1c(X~52pubBw1 z(l{@8qTMnjpleth=dr2AW9KGc3J(pVN5lLGIZK%oOOkh*E;X4p^X57d#0SX;+N5?9g9 z6^`uBLY}z2C*2nz#-pd7e0aa*X4x5uFAc!rnA;3)D7i8QY@vCi`H$eB{@OoUf8$>a z^Hpez>+pdforn1dn`{mpf-R5^+TgC8jOk#>bvnz-fjDt08v2indtv(+HG|XL#r<*u zVDpkNZ3=84{V(g!5oPPy)TyGSHtmqM=l%bxJ~Z!dg6m$Vw&M_6^^V^5p&+1qG6+*4 zOWW29V#<>v7Wgmj=QHo(3iyAZ%{v^HT7M(uHj*Y}BJ{=mLncYiDAokibcAT?D?wg& zquIMCvd+k5g7=e_H_`KKtxoP$7K%0VPtL)|Pv;Io@u#i#tY5`2o6E^3x^wUMNk9B8 zCXVRx7pc8SHn#pL8R?od~?5tU9Pd z+$Lp2=NK;Jt_Wx8djHSpN$U|hpL~Qf4T7AGVp`u#qM>tOhJ)T)^RW81qNI0H1*%SB zX17xy6f5*V8L7g$dLQwG214Xo9MODu?ciQFZW^152+t2zA_*9cY&pYjUCV2fe3OE{ zQWdRV+tuRv#juszm8*Pd!1ovOpo|vDhz$5`XrA+}C;&v|X&cz}C%4xtx1Q)YU)XV4 z&t;9I;%VatzksIzFZ^SIK}C~XJCGFBn*V|4*qp}y)Cqowh~!_ev833EHGum&q~ra5 z;h(&Q@F+GdEQusV47`k)Z+$2p%mD53UOxdY9eE;Fk=V1cLZPZdQl#iT=A5;s&J_xx zfDAB9M?_@|M>_45;uQsfhC1&NM-AV#vB(L;^`3}?7v?-61b#C!i~yixM)>4MsnA%P zm(?mGdzraiK|Bugbm{FkKy*yV()>tN-GmS(0X@7tQPy`von5(X|F!UmCTtCNWB1!P z6*d-_8`%p^WuRX???*@bgT`?tji&2qi}##ifD8)O(7c_Uw!d;uMbfX%>+}i^64lQ3 zQJ;f{q%gUOU|&|(gB`KVXmIX$1dR{O=>5M!Q8u)+P1~4YyLILV$Q&InzsPP@49yap z)+7oEA&$m`E%mvbxODHYOiHFz=N6kKS>E@;ey6wuOgGyQLX;!K32&{IIX~&%gCvR! z>=IhzB%s+e$Zm&L3CwbD3(+yX|JlS;P4QjP$2h#I88T!J`mN+!zu%HgJN-wFXMY-c zc#M=wUpaz}v z#avCE?(CDm?QKpd*^7VXE<-4Y5Q2+zE!_Nyi_!}@kibI6)KE2|+b-hlBscjKr-QP# z@*&=e39H6BVKD@dGJ6?9FcKv5*@EIDdfe)dgT@KmGB1g8bEH=b zb)%_8JE6eKJOl`l4ww6Vb`8m`IQc{%T?(n-*c$?-%&KnC_&CFPS~H=l;mWV zGPKe~(Mwl&QCjOxNZqW|zBAq3;h`j&MzN5ySRdmJ*%V}7MJflnRtaH4K5R=4< z=Y56ww-S5yE3O}(H1@2_KlXpzb4paSu@x5KkRAMc%#WH%O|#v>GaE5)(o*oB@6&|s z9T&s1MgB8>WS>M5Wq80@c8sy|@^tv}RhUmV!jRIMZRrq9c5*pSIG5siOm~4;U zyO<}{MN42JzTr`j0O)T=RRFm6Z9I=eRuiN0bBO?fY*SWZa>Xd&{^CTL`$JFIn9S*+ zRoeMLJ8o00vCxPwke-mkN`^{%akP&5&izjUy+c}?!!iE%RPzq49a^&gQUu=|;i92= zqX^@cl(YtVHF8E~S)m|#ln*Aq@Bg0lr##?^9BD$c-HNTqtWB)|`(OqsDE>PT7&uVa z8`$dbtAi=r|1k`5w*T>i;AjtX9J{>#knSffbPj>BUTk@2gVM|GsUKhSLtYCzQe)>i zS$TQIdjVTQh_XGLyq?)_wt zr`$5lG$o-9e_rs_&a7THt{ebZLqYm!ga5hq{*cSrpRhaa(<$EJ8hm*p;8b3(ES~^Y zLClEgJFes+W8bBqVP6S}{5^|R=SBKDpIj#y2OJU*-hu4u)7$*$0^DB9-*uco81~0f zFhuwlYtwvGuX4oz*@S~O7ppYGO!kU49Ir1=f_sWaBxu5{t_lkOv02+{0TP(jk;awt z;D1Nj&ai2p2H@d~OrQkx*~ao5ABdWUxWQ6qbI+e}Q#!n`M=9aoITij#S;GqG98K)#by(_wff~TS05C=Lm#e z5(p?Sj$u-{Kbzu*{9B@kYwVrl423^I!!1I5U*>HTl9ejv>K7z_s~+*_g<{tBFls}* zNc4-DCCVo^=#htnOYngUuzM}`E-HY2oLR^;ET`e}^(Bl)HfG|K-e+i<@@{tz&XBq*ejtRz^XS#T`csv@P>B=@ zdgIIOSj3Lb!N)~NftCB;(IzG9^GM#4GN5t;r0Msl`j~db0PzL6_Z&^!x)lGC%5NJI zdeVSj?rH&gdm>F21ir_BNbAFoT$Q@-(#zJzxx4iuHe_$-__TX9QM#x}N*Ry=4HXxa z|0b2B3Hx2ZZ6Hnv!NdVj1oSum9gj6SE2oin*e7Y&VR(I_Ir$SRmf4==bjg~axkym) zQcTKg9@Q5g;>mkRd<3InHcdqP84`C=aX!Eu19v3#{zCC8^<|(gvt&;d8)TB=1dyZ6 z)Mg=WFH`ey3J`{C~&!qYDQy=D5gW;zJP-n=bFmHA8DU+mTzH*Cm?<Gb`-ParM97nTfW*&?IQO_*vFXVM`yl_xUL-03p#rrxd16MJA=Q&e} z|LIl<1oIpzQAqgw*rJ@NpBknz^u!K{DqD+bNlg6btk7)kV0y$*5IH&1e*u|zW2Gyt zOjBZYeIz}BivdOr*Sj)75lCQfa$H_~$ROxsPYr53LCT~09*iH~D>Z+@X zqApWGsHhMSbzn_4>8Z`N9IyiWf(hCfF%n+%7)+8UQh|H$HDpd;4q=Ak`BUE#F9sK{ zYx%c_JUjpMaon;emADZAFTL<^d!hlc9FrsVSUb>$@-|G3GEV`GV=~S*?Au@MTPdUd z2;~&NS6GG25gpIz?kcDOO!9&uXpMHjrhQ=Tb0_-BS}op(4Usnr>w#D$Y;r*-X-H6w zuqIl9yxPCH_4PyvT2|bWYFHwzx0E8#!n^gS0?sf7-B&Bm`d6$PEboRk^?A zfh$u|6(BUhq5bR$oK0V>rao>)O&T+f<3(K#Iwc~FWd*$dJO6!qC;J|`0f8py4Xg1a zao-DOavR=St!CX0Bil$_=ZdtN9lS{b{9Bt_u+bPf&Yn-<^BuN6IM%*#pZc%a^96I8 zgoT8DHavilQI{SQ{Exk1OSeJdM|6=ur58OClwbmB7BpmG_{sI>^A7#gzQfXw&|wP< z-mHoHSm1X0;*};u6Qc>$VRVGQhfrcb29=gIQKj3X zK#<)>pGl0hqn2!6eu6-ZHf0L7FmEVVh%o}a{b>J^k_l!ud%HNMbPV~Qr~aOWK0Z-0 zWUZC45Yj?q;z2dzom>im52K!Jf;a?5GlsQp(TbB}=9seXfUMcxhJv1EtH&5*>5=%H zT{*T5>M@RwO%{i8|0y8mBX<4AsMB~RZ5^ir8u@Z+=L;@llO5FTn5^rfFMnPQX9*II ztTX~!@TQSR2-eHF4syoW-R_D%-D8LfMGn~H1UZ_TdizPMy@wI$oMPwvzJ>9<^nQi< zL(icm%G}d+4=`E5M5my83>b>Q5nK`p&;|rOifuL z_ErQSN*Oq}6J7tpm&{j|s8FUB2n&hZnaijsMA|Fet9DvFFhqRknWj_AUug&4T~F}3 zqCp#NPmEkpNBgP?tc%KAghsN3m>lk7ciL&Bk~&^*y<0jbCOf}a#Uf_E$dawI)^+nc z<_UaCDBS-EN*9cFnwH^^eN=uGr;Wfto^WcE(2Xlu*NM;|_&CS&EyMuBU8nZWetu1JvPR|PFQLF?DmIESHZjJvjMXp#$g+xAS8*?HbDyNm!M z|0g1w*-Gh6gI3JOKE8Iu>AYI#YdYF(_I_d6&4gYm{a~`^6C=whboxVoBo-aI@(Md# z?mJc}xo~PEUn2Pp@@68-8@9i{2{!EK;j$|bzluKhzkKdlSE#P>2>GNR3(cqM9b5== zx|}CTyyUi0cShrU@eutts8Lqcq00!P_SBnVsVf=yQtxQ}oPd;EU*Q|qiK`OPUAkuN z0PqA$tsd~w$Hf`AUIq0dsS zwUz-K-GXEU{9=j;7B9O|f9JR8Jjv1cH1UN=-=4k zo}L3m=VKH@mr)vk?ka5vbh{#kn40vFX(|jlHF3bP-6G*9k-ma!z_&f za;O>3otml>dli=D15!58z)xvahW>4O+t2N~Nt9Zg`|ggouE82t;KJ$D0L=NB`eGa` z_4l&qELWCS;q#+%+i4HRT%!Y(P_YPBDqcRd;}uWb>YMUH+5chkP%gGktR1+{ zYaxOh10*Xm9`t9SzOcAX4>a;Nq3zYSa;_ugPS{V1JIr@zzRc)8{_rM9iOm9(6GjSw^$EEq z;es$e&u2U+$rJaIf#AD4lx3+Si(r6eC=NhOXa`6yHV?K8dRpkW(@8Pzsxh++d`QHQ znu@CvBjj~^e;wmh@b9x910oj~y5a3}kA(QLX2G1`k>2(Q zCw=7fCc+UOPt>#~!sZu0%oCN_UbBKT!`w&)WKWtzn}3THfK3XDnS2u#Pw&zb(zNZD zn(!{RM@%v%h$9l7FWmVakn>r2E3_h1T<_UgzK->Vopgyo7nZn_jP6t6i8otre|+pXB0GJxL zH}CwQd}#`o&Ufc!m3%k61xlWUo6jjiVph!dx#v$D`%&}b+J{&A!el}n!cou9z+HV9 zF$wNay4&{-S^fz(k~|$xm_qG3;Zxw-O6=!S)XgIVvlL&X?u$35C4uL#ekl#wbQT6C zjz%hLsDyAjWhB-nc%!g*3O~-UoU`@2m4Eo$Gr=1 z`{X9g91NFP{s?=46~^-_Re14BjHNPBbg#(Gn zKG^OO!>B1rKSs;kZT%6Jz=TvJG`Vo)IryXAy^xzygKrKFw~6s;FP#XVA5bLFU?nV) zYSJ7b;&>&WIs!@->-^U^q@(~Wsq*{L3eZgFb{+UfK=VJ%EJYnujRCBZ4kCTQ_ea|{ z#fS-Y-N4N;56Gm8>4;hA?Tu(})AUl$u}U9zfoIr_Ad znE(xVbcp#>n;qd;%abdG0!AyD@)y%8_SNWyzKTl|zHyZlnV|Zo`!#Hi{a+-qAHB&g z%#ZiK`bp9d`~&FH=p2_gA6I@Wt#WcA8{(Ds4*$qBiB~V6u^m-AN=FMQ8GR;G;kEr7 zOHTjv^Yt@* zO7pEAY=%qgp}S|Sr&Ojzkqk(x1&klokLstjYt0pM;=b+%gQRXSa_q$jIrgS3sqY_B zS#g8YGVpD%JI1lrFpi}pjak2jp;34b`O3cB*+{V(1|Bw@%#YX1vVQm<40@BrpbFq# zv}vm>b@&SwF`6*Xs}BVqTqL2d>q&nb9R{@(#adDFQ{uOtiMEirF=MMY<7xb8N&M;o z3utjeDpaL6=YbrBFVEQe27uCS2*$sZQW`ei(%y>Z8=Kh`^0;{gfhHf{Y}(069#&d? z%I+&bPV!0UhiVO6B;dAZhsCGnE1w#ED7P(NebFufgw;y{iLXED?)~F<5QGu7G%Cr7 z^-ni5Yp5I{5;Sj?AA-A|X`@*EP{=wkd`uk7z}4@}M5oZv5EwnQA@O8FH@D&OGsK*^ zvU^-U`%W9gC~clnw{w%YberjFR3QO2VecK-?w~1j8;yY!Gr5y#8zy ze7ZHr=KM_H}yev-MwTmrLfTLSWEz;>tS?DH)sq7z^F0xc<9+1db#H z2>sz4G+=MG$KzZ>*Ug-A4ykH45|?Z$$-HL3&rqdEFGv=R zX7UIYDo!-Qn5N)xYRAu!GvTx4M6Gy4K@{SO{dL3a-#!he3CR7v~76>9Ky_X#z#NtSr2*@$H&tIX}AATGO&$f*A%IwHOP zWBph&zN3oIF$i+(g_)QCK+;JTYe+|Pzvvht4mU_B!{C0rR7&u#eyRK$sB_KH@^#(T zHiTLJndL_MbvIt3QSIh9vp1Y10qtOszxa=aRQ=o}4rM(_5{qqDi@IzBT5;fN&0Rdi zc6$zDGHBbyp^u`m5);(m&GW^ofJh_blYNB731jN`ZW~)}6Hk(t?j6)LUIMzJ>R9?; zc@l(FqQPn5DdLxl#(XGuy-p#-QeZJml_k7SRy7tgwl)qned{(Y;7K~050UCv>6zbb zKA?!;u*NRfG(7dQRBz3`wP_%cMl~3@ZyNVV_SJ$jD-5dXpw>F><32?sUwvUG(k}VfGBtm4UCka|}m|+K! zgw~bE8QUBLspR?!f-4*-9iO}bu8mIus58^k)32uJ*^8e(-q4U+%}F-wPTrKfH61At zk}zjiYa{vw9uSr6~*E#pMUoQXs zSOyajg(9ypObj52Dx^ZY2A8FZ+X9)M;skMcq~%w06UI6W8i?ynpzD z)^jQ*S{YLuM)a`Bx-}bxXYs_?j8q_K5rr!Y56wvR>Y7)_@UD|@zRz*BP*9=I$#bxG}I z*Y~VoYr*7~!&)C$+>WV!Qs05$n5&0jj&9xF*$R1D^j9AbzG`z)Y_Cq&i$HEJ@3hox zRF|5VkGid19z90IyD@Yv0UM;jJ3oX$YxJ z#{b<;{K}pxc>FtV#rkyXZDn;$Z+eQdv=FIcu--04)fC_;hCF*WrRu%lp^Ew}oM8dR9aka8KUWJ`Htg@^Hx{1F<} z3%L3B;}S5Gt8!aa*oxqCFe?@wbii6YXMUpSee0;MsUA~^5#c3#csL;=L+GH~_4yrD zg#;ItR143dQ{Gs*)+w3J%Y==@Rusc zmZx$-QR*@CAeg}m-nN>jy$da5cm?U~Vi&|zA}*brVhzHC6m$}wXxRX# z^)b+6Im?$65)01j^M0-x2Nob? za!a!EE~49;QQ(X`Aj9M0n(m`wy$2r5d-82usU9?pWflGLzPboq+eP`>rtQxaPI1&t zKPmqSto#8J45=c*_nnKvri&4JK8=nQzsq`ejcSy${+)~ysmIRODq7dgICVo{b|!iV zNdd>%>mDErO!T%U@FFlo$ZyaW25j8YVyj6&_}us7FFWY_c=~}LQOudj)YT^zOtdx4 zRMbMWBok2X0HohQZOEEI1O)jmmtv*)2yzN&Fgl&P3jroSI_Z&P#_9>@H_r~KMCrcY2V$M6Gr${N zX-w#VYN%yCP*w57`gA{&;{DtzR|BDK5wMx*evslla52gNTf)KAAu*Fc9Q|mYP`*oE zmf5-10F>tT!A>E|M#maZ83CmQQUp|Q=1CL1ifDlfJN>T4cvRow<8Q6(oGvh*BPbNqd8J%beUkL?MsbW$wmgZW1gW5_9mYv&%Z&K^0pa$A0*Riorq5y zO>Xy7`CWbv_RH1~3?Z+NS9k@o=0v4;KoByVN<#Kk-P9BKYOwPz+!4#VNm zY!H+Y>rY6`af%ujG50$89#U?-EM;!$msRrl%WBZAQR~# zcMx9BH^i$$^u&vH+{T8)s|9&6)T)o!&#aYsm5PEa75mKFiI`>8z673fiFp1kv-#hJ z;y=bJdqqIo;}mF*0eTgtJI!N_sF2Y#$64>^yV^n|MGOJ^Xdrs;_1Dj%-lv=P zHU@Zc1n@Ytrh6T9`HoJ$VK{Y*)3afOu=umZ2;x-BgVlU5DrC$ua{r9XzV^cJ*j?$V z*Jb2-m-OpzBK$X-YdEv>d$W8Gz1GuX*Sra;=%p%V!jk;% zk6&AC8bWqQJW)oBoWq$GY0Bi-8cyP8D4#AjE&9dQYbmQSA!0rf_kEJXw^YS?3=NsF zuAC){{GIw;{dh{`O$&llYbAGv{uGLjb^azQ!5>EMgrR``(u%2(#C&%2_W7G`?{Ed3 zkK;4a0|8lQ7cP$x&_>AXqPZ65cc3yn=W4^cJ%$Ae%V%X=*KK!RSEk*@#CNX zcojI8!2mBYn)R_i#r?HID*}Qn5jxzOi3u(`g+(RY9B9l+#CzjVeW*QLs~D1Gxh=VA zj()Y;bEl>1z`y(XnZy#uv$lp~jh~@47r-)4mqr+0(uJvH`WD@`;1kGP(gSJLlE}A6 zVL4nA@%lG4)vS(B7G-#txz>TgogyKuw)}VDX?5?`n$KBnZ`-VWOgS!$oyrCxDuQ!9 zf{!`u=)tC=x}mD^^L=@Z$n72;tn$W2a%BH(=v$r+i+oUl$wkob3~<;OQA%~}r2{-A zW&b5yJfcd^Y(t9aPkT%`*9mUWMX4yF(+2PC+%XQk-WwBkK!y^qd- zvZsojw*0d}2W6%Ak15KE`)(k}u;9;Vm5nL`gB2dlLLt_YCaubz(oX^mdSd*&^R&^UlXVBz}ztgjVg z?SWq5Wc&p3ac`m^g_MBTL!Q!FE^}n5$LQ4jSZBs7pye}C~{{C7H26L;?OLBD%n z{x@HF&h81ryjQj#N>ytC61ph;<;T(+Cv><>xqjIzgXpqJuNB--e!rpM`E~$}gIDKP zjLnr`j`m{YS7j% znnS5$6_#V6h)VChIT`n|*FWYN3WLnX)i9e`Fo7fNLGajw;qQfTM5Wv8+f$#Y>P8B2 z-^NOhzYbl`ItFu6;&R*CXlKm4X*QU)>0fV|`E3&rOT6ndVK0bzkxa-|A=mrDa7Pj+ za=8gxv`ls=8CaFx#UobTC~**J;+&dP`MhMNtB&Te;@Qf#(^8VrX19QBG=SAz?UsPg zs>_TjO{={cj`Ny&4u{K;s&|}?!(urlcq{nOK?7OQevcz63dmJYu~ph1gEe>IV+{Cr zkWAwq4?ooRQ;bKGry5K1gPxP>=0CSU^yj%XGErY9x9OTyY&F8xKJh0hr+D z%`)7CBZ9PSg-i%PVWuiR!?)-!&{5rAm_5=EZ%M&>CbRB>6?hg|KPuZyU_PO7kUV5t zJM#o4&Z?r)y%dqx{$6yzOzap#>TqlHYLE%<}qm09z>a#jF<T2_&VJh`&SfHRkVaEhYG@>IP1>}w_$ zSzAo2rul#_@75PrqD|%cKC|?R^0Jwnq5^h}p?l^|T!(+*S7h_#)w3>VdrFP7S!pOW1#KaPCQnH3{-;8%)t0p;oFBm5^}C4r2`>aCDRu z5-#jqVt8^T?#f8-Bm8!Neax6TVM8pCmGwrReorUJ2RO6Y$C13gcGMpkrVTg|w%cP&{j@@ZW%jFCj`! zoFXfaoQE|lYL@|{s54qipljI2d7r#GdKqYc0WM5+a1%iz{+!KTuqhX%Uyc^>O<&v% zl0!4SOI0dX*t?1j-8ef#qzgs;T2J{D|HMBh*81fIudTV;Mk)lxsZKTppeudpYn?VU z^#K}BPPo#w*k3c=fuA-GVXgwz8c8|cawR?XAJX4#5s84NQS9Whj$k{M8?S>2PNqf* zA;SUo{+yFco!5fJy`ES4_f5+j67=wv5^OaoG!9T?sUgGc060@Y{ zF!Ev~@bT;8=9+C2p78n$iJe`cVFg%Hay|^mbyTaxr-*zt)(d;z%*JrBPJGzr zBJ?Wv8D(Gv6)H5Ew>A<4JHj9#ZHr5reW(h2-iR9_|L`=&?YVz!)9FXz6Ei9ZCJez9>sf`{5ry?yuVx?rNHfzYU{+k!%HGN&0JEUM}~Y z7Pa`0>y=2L!@o~We5=1^FX0Mu1k_ju1IO8&>)2^h@6KhSQ&e1fKOPbUp$dG%nkaM< z!|lr}+y!^3)T|N?zdgeMJ}&?y=}&NpzSQlYeJQOs;D@dvHD#SdJjyMv^p_Q2=otol zXz*jLv`Ud~WU-2~X*2O(t_5xt4Fx_?Mw5MC*V26pu^Kn)_M<3?l0iVHpFQxQ!>5J8 ze-a04=z%W%BZ4yfGwG?qo1~O<_dftG?P9XoV-^B&wg5js!lWl%O)Y@3_wUmjjK@L^ z8jzB}A&Tdj6KKdZVcWSUL*QSezSkSRhpk>>dentrrrx6Nxj9eHFW>VgkEzA}7+GIn zz&u^`*K}nW*V0Q@A#1S#ZRj#mddxp&-|6%TbPD#&G9N{sEHJL%g;53yX6J-gUWQ;CR{yMd;tlvDDFRG>)dYjVm z6~EmPo}cg&2e1wgt*T|`xQE=MXv(t=hv|LBuua7-{&q!dWmR#Z7T5Ng66mP#o#;0- z0LZecNWPVR4~i<~8X?&?9!qb8w$7#Su45d-J4Q#&?DQsl7g~=MdMstNPJ`ZN4^^Z( z*rxnhf3cx<{0Xo1+CRElhYlWrYgFj*ggLMfm3*#vVRh`1SZaZ&UA>hIa*`I&_FC7D zFJ32i9I{c!vOHIorq1k6drgsQ*d2&Gb8`d9t1Xe+DdQ@rv_H}ARS8#Wiw-R#NL%Me zcY|0b0O~dim+_F%BwcfCR~o+9F_G)?buny!-Tn&>GlG>FRfS%qWE;Uiy;|-01RGdC z0hC*v2a0)bkR$w9GP%>UWLJ!4xX}QV0@*c7wZ8{7SvvdF=e6^vjHWq_X5JFPqM+0a zkBwU2>^oe4f@kPU^HyGRo;pzlS|2vuK%TZ2G8K2&7sd>B17)FuX$gl-pQT4ky|}3o zPjP(AL@8PP*D0RWGsKOA@6-en9$z|9xoYiaEs!Za$IQ zZ?w-@8~n}jqQtOcN3>TY(Shs2Jd~8$9p~6|eoO#!hL8nONg7^aRvB>EL@YxMNYQmX z+w=xZUNcKYB;0#<&&LU;>;@&YJojY@edayExbEEGKWcqzFV>_K!iS~wZD;U2j{}Yc zC@L8^(`APNE_~xw0N}#UTX4IwuteH-Sj(WUjwnLeXl$BU`7+QK#auie0J@&P6%{y8 z*0$=t+K*8>)HzAh`4Z$gON4vgi}rL7$l(DwT=HZfXDXmeeyuC4nsBtm5ZwZ$T$8-S&6^MvVa}!ZCWf(9*#_vW9Vnj?<8U30`9JOH>G zO98?a6A}(tgEI>m$d1&?uT){vGJynj9m+HnIFd0{h3VOG zV*$v=&HWETWPCOr`QnXtMdMJ#g#A&RRsKWfA+>n+R4xMrDT^#4;}#ytwsTmXIx{tT zCp)1tpi)8XC5;>1Gbbh{`kh9}$0b38?_PfL0ZQ^Bn#Vn+$F-i!<8~$_3m__6XV-E; zKg|x4=?}XA%AE_$-#go}&|*|Q6kRTUJq8tj&%{WKxr5|S2DR){86af`XWP7ASC+Hy z?E4^cUie&#^B4_-{pYPs9nk>pRV4{iqM^0^q7Qv>z^dx}lTA_(9)+ z4de>}ejpn6NQvCKX=>VQ)Xp~mp8qSgz+zcc#9T%Geh)!&!!=*DF%K!lw%x|Ju$L}K zP+iN>)8n5e-xwGUBn$`w-`@RhEy;%xlBUSgGpXF1}6Y_v>6#K4Hgta_Y95WPR038dV|di8$}u zt?co%KxbMLlVsI4Pd2?0Ou(uDECy$KJ&B2B#+KXint*fg9QuY2wP+kGZUHIQ%5e3I zm`?8XUvj|d0275a_wNi~Yz#PWq)0HR1>cN+vd{@+T6e1a`t|+P*!KHQW%A9S4^1V+ zWn@eMQ9HX{Miyz!e*=G!O!`+re&h`+r`r4`m8Wbt?XQH)Tkc6tj$gs#7aUkI0U>H# zc7zZ7jD5ia4h%dY?AFBp(dNf?kF>cWi_H)IJI1XWfHnuT)hjt7_FX_3H8eC7TrUg$ zzTPZx@1$KPXIz0gn)UR%atJF*rVtL^-vwvjiZJ0a=d&Xdk_vX)EGmGkQFA3Qfjriu z6foeNNcw~1j*E&2{_0W>*s+GT@IXh+4-_#n)I=p?`Y+O^IbqY11?Mn^fn~AoHeF!b zU8Na&$b~Z@XDhAHn%U+A2I*1MND@M6w&}5U4nJ-+`*2HbtE>#=^6}q{0`o?mmdGq~U3Rlco_Y{@0e<+su8N{Wo0{*dEcoR0*gW;?m^ZaM+3 zR4_CWgo7i#C$zK_gsu{|gp(EXevzqgF|5D1!pd6le6R-`Wo~nUxG!y%OAPYj=U7f7x-9`mX5_eT%E^d;gSb6#Qw;j{nGUSKCv&nfQzGuTweJdb0nc1&IHX`sSs7 zdp|&6fm~i*0CUohweX#5(lv%?JT|A&Yo*Z8H|0ePC>`tF{#*_s*#5){X6c!DDd;L+ z?$BG?_(crLVDCw!0YY;|*S7@1FhKAEq>htwCe&WyW{}SCJ4l=I67?TD`ddk3+YsC& zW%)c4WtfQc*BI#e@Xd{eaPd-(ASu^l(00|;6Cy&;-7SQl zH@cP_$+8U&{9dZtF+7}g)e|(rE&KN_OWMyR$`QyR|6|B)0fs!|BIG;poYw%Noi7K2 z*8|pN@>FeF+3bb4fPYjEpaQ^qW!9|I(D~i!0^rz>xOle~uq=ZAdDIkUX!a&6GxQ#Y zK_Y`&i97RLx{INMG3lIWpFb%?qokygX^^gjKYsCvu}Aza-Wz;Ee%BxME=dI-AD|@1 zC9I%SaH)GEr3+Jij@SW%kDr5SS(<++z99lia-O2-Rbe~g|CJ5T-!W_)Y<;lQYE3j5%*z53`p)QxNOT9Kte|u3)lE(F}gfLa(OjXj4R z3NM!>JCZ(d_Rb5-rRg6*gRj!tT=oBXp2ZJ92`)Sw{f(y3(Q=g=&4zz2{54d`@Lb8+ zzqKmq9$u*{^fN@)*Djg+k!4?^8ETsVdy@iiFl;wLuoaS{Y1g;Ol7lNOAUq}^6#iG2 zuk1-y7@leaazEA1k&JN!gP-ol$Y5ti-Q2k4A|%1+T!*&kOsN;*vaz#i+TV1L`9yldDq=CpqZ4FX)m| zfEoUopAQ^-#7f^o!Rviy#QfV$<&Zy;VZ?X;!SsOeeBS^ls4e*Im4k-|9qEg0yGUor{Es%`y{vN=Q%0eqE|5tZ0 z*qBYvxRET+%M~38K~{9N9 z9zp>i;O^3i`d$6(98IHV2`*d|OfhsF>Sw738>tOVs9 zRe$sRv(OzXdMt23?<4d+IgE92_MY@vMg`TZa}ukg^EmyFGBPPDHq1AkzxhO&8N`ER zJly4%ZAg%o<~nOOCN`W78)^HpWFqetKo-TC=(<4_1|@IXgfQOG&UtcZG(>*e4Wwb9 z|58GVMUL6o8%srq(d3wG;1EA!g#JwPpBrq{3>!uKmEt3EQ`i!AnySp8QlxCehR8Aa zS-Gcc!5u6`5b)IdPT?~L2Jp%!jnz^D3i?Na6VN>Sl%b2%fATI=WzGXG9bV!9w)39- z+|`}gBt+nsSm}gZlMslNm=EMn5=2AD>{x^$m{= zZDrh2#t?}YOjXv*#I8U9{nJru?tuU{GTyMC-3=kMg#@RXRp{TQ4Vj=D9 zwb!>7b)l~JGl!JWaiZZ#V>SR_jW6&==mWng`tqe!RMogG-K#r{hP#?SSQ)!LLRo<0 z2!-M!K=Gfbe{6$A3z0(wo7`5f44jjf^7})Eg_b!_EKH($c$OUIb9!73#;UZg zcO#D;9vWu=)VGQa6%)orNkfH|T`Yv%oR9P*%p_IrW@AK00H8dY;KZXmv*#%xiQ8a@ zP;z&{Bcj%s16CA8sxBr)s%P7-bq2dmQ`XTK-o^eb%>#S;S@73s>*i!93DL$&?mey!X3kGi4dzt zXd(u@JxioTgaY$af`+kx3C4TOxn%HqYS{YQ8=fe%Nu7N%bwF>`2W+;B;PnY|ivEXY zkoUc3`E>D}>rd_Qk&Et)lr34bXaDh-KG8r11U_*}$qji+L@G6rio0m%swl5afmmlX z^*79XW(p*GlWya^S{T;_a+=`0J;4vcuG<6pTH1>@f`A?y&`Q^%N*Wn^D`8w3dE=d7M17{0|@&7VacA)~11-F_6wKrt;V0XcJf@gq;8n3M`MWnB;n=hia3 zK^d`6HFqnKX(y6}-)X{jShl=<08Y*Yk)!?XaPxN0ZTTT6G|8}Ut){V_ta-nICXPlN z$iA=ccmWpCjLx{coU+zVkN#nE!p5ej`FO8%|IiMQ;M&*PnF947-LGs2`R6uS+C0>O zDn|%XQ-VR!nC6}c^d!EK`qy~(BtC^298bV zLaX5kA~BrX^!C2EK#ZJD@3gi~YVL$bsuQq~X<|^ZHWqB7{y`V_ss-bFCyfjgsf=Xn zbu~(FfoL$HzoFB{fqE)}j{p4l=-L@Nv-JL;A@*{&06X>QqVT29N>TQ(j6ps?wS$tR z*{pCK1~l$u{kKt;^rm``g1tW%zVzlO`0`1^gk3i|hMsdUL=xsgi2Z{V0(t#Fyj{y(XD`8=n^7w5?(PwwL89&?qI=c4UeK5oZ0!>G!)UF%~Tyy zwLItLu<1$g*`t{}sg}PRh5_vSh5>})%h%c!BC(&#dEeB~1wBN%=x)iRTsYlzyvN6w z-FB{TMvEnow>9X5#OHQ^Oo-|bnSLdpF zCK`DBeV3aQ|Bv}tF-eJSe6XC8Cs_`(2@bnHo0$Kh4bhM7^Oi=Jbam8vvObik+JNtY zM8=&G7pBTZpEL9Z%ih0F%vX956pUsR8(YlFjqHh`S`mE5&6s8SHMRK#Id~m+(9DO! zi+46lAgwU9x0bV3a9(Y$)I;B%gdG9BT@Cb1lmtd{IbOfg!ypSYEN*+JYuAXH2myPmH^oAAGvF?2`g!ZXc9rIoa~9tU z(RMBX*OYo(^KSMt5xiSGBPY+n~M;EMm|-4F$>P z$;eFv@2wDDbMBUi7jM3K{|^FBY-tCJ!7_JoIMn3nRf=9SkrQHobWmP0sHohgPS_^5 zlfbtN4#K`x5uqs>ayrx5V3XaA!ay`XaHmM$HuQ<(5bLUAQI>XCHo*>eoK>6dXahpc zpV7qmsT73$gTyA@;$lS`EprSDML_uag0UnmY*m$D8y1><5d}Ad)hj4chfCI(oEGyR zv5@f`vxW?q1s$u(GYOuYbaVzoGw)QrcKuMHCc{-V|EBzGve1F%xoM zB1Dc!&&C%jt8D?$_oa!S9t_(;4F%d*lyy~`YlVfZ3vK*#Axt7;tiLlZ59|^0o%jw` z9k81Td+YDq5jA}zMpdnUgeKo5zPCDHyqZ=)2R+bDNzwL1)(h*T(S zqQY~opt@m|v8`k^r-V_pq7uMwpO+IZ=; zX3&y&j$M}F+|o4nwFm`7+%nXKm;PNkvqHN(?RzX z$}Dd0Y}lC(p%RJ@=d&n(&@0b6*}#gfG}Ghnh%_}deL#yC^@<3Sv%%;)oHrmzA57JD z_pQReky;%+9hI9rGaf|2=%3|Wald_6bpjeoxcx5|<9e@&E(y$jxpSWFv$?r{dB1z? zV>C~I`fCm-AIs8jgv3piSV;5H8H;8sXlTTm{83}feWKk_3ET&I9NM=cZ8;xVqCY+q z{*S+=GOXx9;g2AvbHynI>0H|Z?SL#i#tbX^C8YSAYOg z?r#t1dWOB7b0S*T(a-Pk8JJ}COM}kpeEXXusTvy_9U_bh>XU>_VYR#~MJryA<|}N_ z=Yj@+=Ko-qfRF>F`=G<@pz*aWKtxS{AAkzoP|=Nh4@t)8T~&Lkonp*l=<6TsFXi#) zx4G@(dr|fU8##9Tr=n*Q9oCO@WM8vJlyV2SYMw+riY{m8<`_%&&FWOpe{kd5d;hRR z3UL%S1qR8W!YeT5wd*@nTbnUjN`$UkRJ9aunjnyRQ2mJFA7^F_7i)QAN2R+~$bOJ! zch8BH1P=!9vEaR2{|-T?+9l!iIZ9>q5h~lNe;ot7Vv4Luno4wlTXE6>qNYRwgw%Xg zzLvw#Q;MEIi}LHYgVqUTH55#&54?dYW`2|?ipx*ut=tCBNM`Mv*zJ#^5DHeX>5E)_u@ z*4@Rsj6S6c_)3Ztlk%bhV55k!?Y`oIkG#Z$fXgDBw@=shDuLHT?M(nZ1H+hz2_2zdoY7gE4@0 zZh^v^3anF#(Gc%3E(c+D!Bs9lQ>?pa%0vEuP>WQVJp3E$xd8k-(1!%;cH2+RPeLPI3$qPR1$PG&KomD<|H{&WRFqv4U3~L0LkH;9 znn#N_=vH2zk>5pE*VO#Nf!&fE%f6TsA(zpes?pL`7ZV1?kb(Gv5v*9;u8E!kSi0I# zEb!YWdxSu&82Fu9{dSGR-l*3&SPJFf=aQLQb8+_O&#OLdpA*_Zl=cqb8zJRhlEhTB^(kJi|_2UT0Sa0Vi(1|!`Z`nJ}TpFGHc7ac2C>O$nx0mU9Zf3 zze~(5rltuiBL$DY|mJbz%{|a z@;@}4esWmR9)3&WRnv1inni4AkXhi<7%xVXIAz)B{dZ<_WU9bklQ6+3bNkBdbcu~d z|GixF5(f0MX-(kGJHOmT;yB})H&&a^H^-m)!TeP-qfnJllrj8%36=oCd!_xwZR3tD z$W(@cP@V0MO&a*|{Wr%n|Dpf{@pDYt&TjwSF0Xu&=%r@!aF3JkYmMRJma|^6^!dAT z^zie%L3#$2&R~q%9*kd6QRLRI3rA_>qb=aK;n&rEbH9t`i}zU^2k2FH$4M3z-#%68 zRk2GHvRYsxUXkggAwi1CY-5FHVYRUP=r7YOAtao`;R3 z2R4zg3jNMG1<-EL^|yx#pT9fI4bmHPi8aOAAYEMIR^bFW(7ysvF~m5CKio?p&E#{J zbFHa57ZvAatrw=3SY%_zgglw}>Qe9py#sihRbdfN0QfZd%qOyu_Xyhxp7$}5RL0u^ zZ=DxOTOh4zaL5haY#4U7hQh4+YB5J~XInz^(Ly_})gH^@ayc#{!M6sq{e#8oH{JTt zoyQC`sEQ7?_v}{?(k=lFSXf5`>XfVNf0e$RQ>`(OsmGfd<3D9nR(P441cAk&&?vLz z1i->0B078j;Q3sYZWDL&n__R|KcEZkcb@IdL}`K)|1sZMK9BX?#2UFU%v?UXZ&A&(d%ebYzQls$m zdZ!t(Bf_;^TSRw7fd=r%oOx*#M1*z1DEmo^E6|@Q_p*cf?c+Sa))O>KL5;lRxb&YS zn|7EIFbF0iW2-yxP$(Trc~#~hiQV3Wvg{ieMoL=x2aAgYX=GkY#QH`D)#vpz9oAo`ahx=**(>e)m+#s^z`nMzHigANh~^@K&ku!i z$1{+LuA09Te=!_w)gz$4V~q+GqC8*x)WC!oC(6wCOi~E^{23Xqif-qS=xJ&;#nIp2 z59#gQs$FlbkE}THyJj2sn?bFFk}EfA_?1OMZKVEPmUay0b#!h(4u`LbZ>!o5>%LeT zhbtsMl9m~)IL#$or+{F2KRjj`mQgdM#MU)53E?hW%ZQN!*~?CE%;c^-XZXOVo^avK z5Mb-KmNTldgZBbBt=;L4uF$It(EV&U+!go3g;#xpmOVB4QJYv@Tg>$>@4m2&bc{%O+jtMJ(Q`O&Vawvxf`E{s{NwzH{bnlA4ioal9$Bl{3HMtx$wY!Hd zj<&ayLfzC|wq}Rq-=Ou*o=*Q)TtrpSjy*#8r900owXEVWnb%7JAbs#EFDH~AV-G2Q zDeDz;y}Rw;;D8PeHCQlHsk8yKa8mGfRbk|I1Y z%Ex=!;_W6Q+-Lzy&_fbJHK;kn`TTnxq6YN)_iw*)Mve@2Ig+s$)X8%Zf`dHEn(j>j z;P_Mmx}~tGxQym(hv)k9h0I|V#ae4F78lRI0y6TMnnI0ml@P0u-`qUOXrK}dbQt>* zd8h4f$`t%Ol~gxp;_3| z*vNj(Vq}Qu{z@yCuBl0t&4lvMya*_3^_;Ty#Sb-Xq?YDr>Gt!Z!BlEWh2OKEt>*9D z_{%rQ-(I-yRlTvImU=2sWn&1*tWss}?6rw1W+xtdc=yi6@-Ehrd0`W_JVLFCeCgw; zPQM_ zER8s?PZ+?8W*BM`x$jrG#%Pf%Cm+EZzgtJ?%fhpa45&VaPPgxL}!y`nkx z`}Z)|rJ9%eFBYVo*&F9ptQv!bo+z5`je0M=lkl{gcS0J0!qi)DdJ&oxA%?-~vz7TL zP1$jqtCLeiMyBZ#VCz3y=w-$`AIm}|m|q`OI)o4yIKS+={o?|m&ArMfuTYFW4#&yx zyCo{5p^UrFE6_&q;3Zk9Ag@^e$@R->o6pSO>jFp|&OcCbBekY$V}XC_c*;c9gTszP z-d_JsvMb&Qv+Cfgn_;YV#399I?De?3xEav6r6}iCw|56o1FCOF794G++uVQEy*er=lc_v5zuX= zxkSYvPg&o|9_;Aqi~Q_c{x5LIpo~U-xwydbZhY6bo=Qs*4GXTEasdgCQ!j+P{ii@) zy776UF|C28HXZhxfG^%bc&D|_!-#50k|P$dW_oGSpgzh{8)hSbppAUTK(@t$Q;OBE zb54ItP|;r;#Prme0d7^RP(_9gE8b5Jl&m=#jS%=NAswo5yR;@I#s8BqPL>HxXSlI8 z0-}(EzV`{4$8T{Rk=q{0BJu!!ZtC&(Is+{#AKTRhzhi6ar_c7UCjpHzG|3MiQw?r_ zIs@=xE7mE@714i!2;c!}{`q>;h8%F5v#WRlL}bU}J?c{wsOKW4&6QUKi;6)IjX}WY za6!oej~~;0BZ|Kpz{c=j7V4usOOQx4CK{->NwC!MwR1q5MEug5<12G~JZNrW4)1MRmy43dI!#b z^9q^k$Pm%ia2qeFb&&)Ew1o1WVfygUW^J3V`lwUG{x!8%Y%INs^-H`^1w|{TlBIgE*T63u z$|^0yWIl76DOcC1;OKDC$Ip4pAY(;BI>lFLp2nn^+sfQfPhO6n@xbf1!wS59JFGdv z?1h5hysB#2JUBr_)i)TD4DZ8!bv`Tv>qnlol}pji)7_!KY>2*SVORYynYlix$&o!{ zud%ZV{Zk|;gU7I>jb)&|o#Og)q_PoQ#Vih^E zDQVjbX6s_|M34Re5ggDNI{<*C`w7;8Mhj6Va49dtK_d4);fG`OYgu4hUL696>MYx_GcuVG^(Q?iBBMl_z*Jmq?SRsi+9shlF!gC*J0GVKfhZ?SGI2(f)3EOa97 zfJ?H56jZ%W*eimF2=5=59kNKwJ@cri?eZ^{$+yUQFE9H#YlHDP-LW^B)(68BJE}!6 zFx2bYl2CO8ndZiA55ZHhF%At1LmMqOHauwL1_O?im8#DG^v2ezCB=rQ$0 z9b$O|R>bSoBt4u^p`ISu7aOnqK*+DILJ1ICi|eFm|Lf7XE~MP>R4ok{2+jstjEVHu z!=96GFXORTDru3(F+R+n#*RWo_T1zX6ej02a+e0O5--in(OlXSaXt~Cb+;!-sB^aK z#+1<=j8`(BqFER<3euMmuTFpb>9Zn-6)g->el8E(9t5)kTEun6W$3wP+jQhDwyY3-qN}3%aCzK~5gt+M;AXG0|Y;Hj)YS zZ9syBq+J$)cm-9^{<|9;_3P_n_e&`OntGYG{;NGkJayD<88r20&*pHLx4vW|jH-0j zd3exaklC-z7Br~;pXGxKO-|7mj?k&U58KTrx)vJjqh;7*>nx7>bvzMV-T9j;hBX2G zjR+am!zp2!!0^|<-sURe?)beE9`zlfbm2C^RF8jZSeEc;YW-i=hx5rCdX+u#`E&hP ztdk!hsivb}YBF1NqEjpeMt{$RK}u8x8;jO0U9911&H3|ICUnBScn#OjIh_I^kli!On%#j zkTyR&JbH)YW6M7qSc2-m(L+N?yxVV4yA8@!238dhGw<1VpR0Eajuv&QOoZII`LCc* zy4m>wyXiOBVp5h|^!|8yvI5Ci5h^-tM>lZOW{(J_x4?z-c5g>uF$cPn zy2N30i0IY)qt|2k%%I|$S>uHX%irfx8u{&>R`nu9A^Kt3ri-^9rzc^73^1}v`Z(Dd zk#?9Vb=uG-foJ9F^Od!kmQ>9P%XBNG-&=6yCK>mY1QeKduiKE4z+=iVB9Fh!n z=MYG;P2_{S_v9O4;6d=u70cfqIEiHU|h z;L!&SG(1PyzE8T!m?^nCJRtO5eURJy)XlHY7L(Ntu1Wd0Lc#4Sr zg2|I#tTyk9=Z`}q`N~vLK>uol18PZyHjcD?v#{f z2x*Y+?(XLKasQuZt#_^W3-ZAk&e?VL+1I}IS=hEsmBbhrSReR-A2}}!3R@vy3w{rg3yo02+8wZhEqQ$7Da%@q}uLPX|f!Tx`L$e^pW=ie*p8vTkOv4j2S);If1a#X?13eFCKfIVqDd?Zm5r$htX1A9t{t(KVzscx9>?w^e@ zzplwD?ww=a95O`Jg_el6Et5VSzQqS8I#-yg$XfOOPeLI%|DO|u9T?_5s_%n52xZ?< z_Kak@`X`hBhofD&;JT0Snqk_e!FQN32RHJy0Owj!+dYM~g1Q>vMbl#12fR=TyHWw6 zH(0rR50W%+>um$tq>xi)#Lq>bt`U{y^v#o`A8U7^BDS6>q3vRQ6m84Md@~l1O$N%v zCb2#&gYAkq8CgJ8!NN#?O6?IKPDv9a@&AaZk$w&Lc30z69p|;941{;NaG;B#KQu6= zH!kTyxCoi)D~>dYhaK*D%Hw%D#GiG=G`WWslhb9ZG~DgesS)Q}AZj`TF{lFxF$ z{G^v<@elTF{@Y@TJ1MSP?`}V_Jz9>&U9UX1I-;Ni9ys>!9~QU2AQg57sHLZ49>5+O zH}lgzED8j&cuJJtqaN%#UL5fhRa9t^KB<**so>eJ^QZDn z9z7~4LTI#dU{ll&)w}>PSRTs={%g8q`x0^`-kEfN98QPKfQLil%S<**#FcwS{sjNj z$#)2?B3gpTw<55Q=Ykx_RSD0>FZV@>gX--qu!YF2pEF70oss_qL>-EZvo2_B?7b;l z+t`i|s1aC*Trut)^CYb<`PzKZ5^EGNss2rW+g7Dd*0+3{Oz8QSu;3$e-Bzw}Mj;OL z^Fr_D(v7MST}M^j#L>#+mxBP7MwNOwT@37N36@zmE>L?d40f?V-}bkl*%RlV8MSes z(j|csj8YchFfJ9_oxhX`<@~m-gda01eyZ@+QPtV(>1zxUe*6`pGqf!UmRSYq(a_nU ziF@P0^HdQ5Wr^x4CbsG=P%gSiciR+|MWC~+l;@LP$qSXA zACVA0bllwB%u=pFctR4ME_nX|glYqnVPQT56ZF8#_HuAm2NtK)N%G+nrTHbC#Z=YR z$pqJ7dKQS}l$36cxFT?p3=DqR8MFh}e!(M$uqFsWxR=4my=ZK)rtkG?CSce; zM|Vd1w7GJNOpQ+H|LvIN$hCW5F6dd`Ahc7!2dn!-WVP#wA&@=ZyVDinPh>kGr+^db zKcw;#t;=!_9Ss}XmVn=eh+{+rGrm^>Zmqi#er-scMXuph1%6mp#Dq+k5%!F7pCp-} za5zJ@ED3GuBN)#JlWDB9MI@r=0OD)+g?5YXiBWP|C2*K(i&BgP&E~Tav8nejxdTa9 z?3rS3V`M?*r`8p^JuM?(p_%fs{mrPWhhhG8?X+dWww-h2`Ml7qv@k68%lMJG!whM$ z_V?l6cqPc8U9wEi;d*w*ZPI|KYJH0Z6u*olp7E8HM2~%|Pdy_JRs9z2<)Kc<^z&f% z5rGFX>9~*6HjhWGh{PB_?jrQwN(mDIcw1G;F^fF^xsD3w`NCk0$DrA{h$S)P(kOz% zqEu|%WxJDl7L9jV3F`H#wb1zyKeV}Re+8?fqi>TEG|Bb22x2nR(ilJk?@WS+N%kpnI!`GtqN@}pnPKI-bl0xI(C?xBE zY1d07INtGeiE(XE72*2dciA6V26a;2cbI@lC!sXwbJCHE1PEL<>XTa+aaE$|vKF$Z zM*CQQIC_G-7NW~T%VnqinbJhPNS2qElkcS~{0V|pbpi?)a2}BxyZhz8H?r3uM@HlE z@`S}1#$wabswb!X^$E+WPy8e*0v>+ay4trf_E0cQb#;=Lrdhnd#6z*Rp*27m{;Cvf8wk#Cn4`%)5TiH7vD=`)4 z!H>1KvWPIaP(fe3!)3C2Q$@)Z{fzbRm?dEZHu_EWsvB-AeLT+?Y^P1%zi+O*xk;zm=JKs0QN9`7bmra96LM>Ni@S6Dlw< z>1^5u8d-OjcOpsLwXw*=lhZ#2#gwh~Dp3ntR?B+H{y6*8*F&=|mk*rbBLEGv#IBB} zd|A~-?PMqFm>xx=6}yDBfq|b%%$L+*E_kR|`AizA!~T>kZ{Tw_C#?ji_nVFS>G@q_ zohW**g)EA}KGqwa?b-b5sZe{KzT;Am)Rf2!(Fk6siEry7a3smtU{eT(<|`&a#&cvs z(c0k>Q!N~VCxZf%BcaDjf4;1CzzSc_noclMC=A__-sPXV-UL_swPO6Li&tgudHkfq zVW!-WI+`v3E!cBEcy6BPK>nvzTTUN5=0JPkhW0c?0aev9+7BXYV8N+Nx%!+V`Giyh zdj7x|sbnVYmt+`WV@hL!#{zFm`vOKoe}g``Gre)##b1T=j?+mSY#_Z=&SZ8pl%4&) zKT(`RgoU~UZ|%AT94SbW{iVnVh^{7iae}X?Jo(!(BI@9GBD<=2MxSJzKXPK?=qzKQ z=n83$tZ3UQ)6)#_rVCwO%vDt-$(%R0K4K?Vvv6$wBrXbPmmXRBGohNt+}Ayk zfT`9B!+DY>4JG=tqMP&O9c+x+zw8-wdmKwk@v zCAkL0i}hRms6YNaGtXoAyuKnvv7$l3P&F!Wai-W`ZU$Vu)xA_x&j?8V_~YMFZhiAZ zdq0ndJ)n)S1t0KkDL49>O4i{_W{mVf5ieBjYc_rYUlYnA)fF?2zy=ml#bxk?H1T6` zXqohg%J<$7*-xr1z_%)FtK(|by z1m4C;iU7vbz$`R4gcKIOX_=fwGnQYHW8MAs?c3|rC_yqShY)aUT|3~_<$Xp5E+Y0~ zcu_d*m_eG%%sDygJ@Ps~;ijpWQAz`=$Soo|jgZEDBLu@olX6bw<1ipBih(P?M2m)t z;MwyDUAku(1q~$i&7HP^dL~y%oXsnObNpIo+OmGRS(hOBtb-lTsvJ>iL1n(MQg!|n zW-E4rw}{ezIYX&keILCP=g%>>|8iRBVSuYuXx#0Y%&o8(ob&gDqAd+y^26{SHpD2O z1hUl)7BM*856D)l4S_ciYDk4iTX+FIknE4=oI^vJ4?P@E7c|7FDn3JW zQ&UrS#rF>N(9e79FFVE-#q+>0vTJR4?CU+`&HGX=(8e)(bx~wlm#^hLtz&L`+Ma`H z5R5+>Y}r%3hvtbeX@GZ(Q1=tDReV}KD3>WbB63vV(tB@p7&g=>Ju+4WKDI_Q{d#A; zVP1|l0t0ZiFPm|KIDoU2zZQSIg~zhx8=f$OY0=@0NLXDzcG$sOQ4T6LJ5y~hsXJ2e zfu0Hx*RKx%c<)MjeiX^_gp~y1_%oto&O@Ih-04n-&gYsBPV0mCJ>QL&91Hk0Y371{ zPJtKZ#kJ6?DQ6L}GDAPuH}Tm{d`v4(l8j7zuJNkvlQqnyshIuN@b^kvB@jHB`lf=L z9E08_XJZ&=Yx|VIp59vu$KQPxdAY)!V(eg`#Z!ml6aLI#ADDF-LY^?X=4c$BkTA8m zkt(i=><_0FuimV}RPUBk+Q|4fWLlnrQHtMSVK9ZtM z&jChuIi@fy8eLEoaCN`~2v_D!j#vAdIv!-&dIkfi7C-%D&N$w^D@ZqD5_0=qyT_3S z)O$YeB5|HUc*FbX5XP%wHgzD$kVuTN=_eA*spc@`JDYae|@| z^&lE*t*IZ8bTnun#LFyk2O!XB7WY~H?7&h@``qw`i@=-5;>fCT6hr34N`lFQ_C_9q zWYF5gdKiX)=;u7!$8^03p!3o)_I`?oKk7`@`75X0Qm0dc%ypa4Ywk>-xFFV+4{-$x%Ei}vqw{(krK4LO`ZN=|v}eJT1c z9TbrBwo3ta3_&2oEtR`~FE2lhO$`h7gWa&6(y)F*DJ_88=onFR%VYjpFt@TS`E7s? zML|c0|92k;0dAh~*G}UQ^8z9@G2)hm>@InJC7|C(08C zOH^v}L6OF<%1`dj02%Q+#$K#)QKWJ2Z?!{qWegJglY&0#tx-B3k3>Dq(PwI+M;hW- zz&{X}9T+^52G_II6A31Had-YIa}&2+Y2XVJHFsZq*~_ahrz+M}9ETU#dyMJEtnHj6nGOvw{ z(J{_P5SIEx3D)w(PUk_O)7qDu|G~Z#lhf0uqHsa#j@49@hZu`G0DlL@`HEX9J13HO zVw^5+EN*{DM=SiBFO-{`>`q_M@*oHlkWqVA?icVN-y^`=-dnXZi%}2p*;4F zt!eaqe6jLSwQ$oV#T}1jjska(^>=lApmypnm_}~TqOh`obe@_)#tJ_cdR(RHK}85q z3o==h)K>YVI!A59*PhA57ZEBO;5!^mCve~=v}9>d7feXxFjS{y(TsmbTaWR6kOSok zl;^=?`uxg-K_^uox;ON8@cM2ca{VDDNZt34UT7ytTt`4}^&DB3F|s&Fhf(6x))K>G z4inMU26S~HA`k6=-n4eQScjqKbP#W5FE|@o4WYUvbZ~=Oe1u67Zi>V^A z;?Nzmk&}Os7R=cAWg*SU5O6fax;Dz&F*lw5a-v=!1+45({bTN|(UtJ6n_Fj^RdT$J z>L~mhcDZbCe7C04&fKDsk}d!wq5jm-*Fo?OG``Fg=8h!I9*z8xF?krXHqbF<)U~VH z?jvXj-B<)(a$cw1-f|1ImbpY2Sd$P!@WB@kv1vU!Wkq2^1jVCvkU%B-r(tGes&czy zm(uWp){sNSvb_&3NMdi5(a3{sSD7ehvD8|Zn7+yJ9;)!a&c>^%tvyKCsG4g^t3Sc` zDgt!oWf>v5GebXn7oNVE>wIWhW0Dzp5+T_WdqhtxWElwD`6o5z@D+wFdLi2Cr2+|P z*E=H}oxqW0TsjQK5brqu^7VT|9TYI%3c+w{eT$CC0XR&VDfu~XO_K1-rZr>aYjxd* zLwMI!Cw)4P!n9kpFIcMjArju+91Zm!Q!+(yQQVy62m5^m6x+Nf>wln+RsfeaAhcvH z)G--Ux8F{k9-p9o3-%kSzT@d<8wwJT@*a_T75NfJvk1@x_f2X6aQ_FYr*x%BOTMi4 zvk1&S3`llYHm*kmd}6Q#yagz2?e+tYROmdMbpQ(Bm~w=1leDDj)qsR3wj%WteCoAA zns|)i?v>m^he++=PcR))GVKmPbBQiIYSSZ-^hL?`1sKWO%f;en*`E+RIW;PhFYC@6eR_y6o1BXj%l#gH`1LO)qwMI~ zSD_~Lv}$Sc*^QLKbIuQnSr}1Ij3joanTHGf*&N2Zu>Xov+W_Kf|M?>Fz>OXrMyw{YP?H_KS`nS1!b@-K=Jj!CoPH*?d6>Jq{ zA^)3}hDwmR<)F#HJDL6ps`zwvx$$fW#xkj-Phd0GTeQx01nQSRaBgjDe!++ClMGXx z-%^k#mWRdL3qN%nLsR9+L$gagT2eibzt1gzaM`Y!lEFgQ6w5Xp^$Bn}+qBGHBFS2Q zMcdCIzN?kHnN6B;jLf32?H%Qp?Rb!kZkU)JMrILs*HQD&pZjIW*@=%0D`~mx$kQG~ zU`gvA=k>IYKL1jQ2?m#wN=byo0~CixUbsYxaI?mB1=N9O7N7xtizuSwj)OR{O$(%n zZXz;E*hVT9d)JPDp|c(loF+JFd1?$~(B~07rv^lenqFD44wlqNe3gFnKay*{Q`viI zXTfj+CbL%Qtm}AMi;&6ee*hv?T6zbH6FN7xu!_W~Z2afk^qU$Ft4#^NX9{xp)m6ic zCrh{->nTK!_Q_U&!GUDsE3x?dsq zU|y{7n;EaraZmsAnDKv7PrMC5;*rXWvzxd886ax`e|H#^JJY5<572OPHT2V*7CJtD zR9zevGM;4)W_z(IbGw2KzPhDH4NY=c@*nEz=U zGydw}2mY-Cg}f9R8f4RUG^jeCQ~0>aO}|K1=1dj%oI;F4PAlyCEI!Kx6w+)G=5 zN1-N$edW-&!8^F^ZDmLDDqnjawN6o#AcE6V!~8J<0&}0-vP&~`06?I+9>KUp^bYR= z=IyLD;bUHrP0r+ZrjkdWPoSS(CCSHKTXAR?;} zq2jAej<_NbuKchN0LBeN(cL@g?&?CMSY}pJCy(%7bokuYwhTYx_w!lI?ZHl5d74lV z+yyf_)4WLYs{8Fix!z{CD*rjh^poOKaR8T@XJ8bLg_l6h45k`Jwp4s~*e4V~G#aD{ zLyCdTaQqaH*ghQa=hAPAIP}ZKFX8!WOrT87m{ADu*2|qHk3CiiP&tl8*wgfX`ki08 zCv!y=v#OwEY($O~nxikYivg+D-)qLmwN8OhL?H(x`(u`lOS_L;?9NzloRezB5C4Et zwZxH80h#e!V=Gc+7E!a26M16t&lcoWawyQsTz4II_K@9KR53DUas-2ir^w=#4P#+J zF4O{`PlYuo?3T%k9SXYLIneC^VB}NU!v_j-I=^|sk9eate&EaNGalk1 z#mbPsPdsshWR{KfdU)oZv50+tuZzOg{0N}_`F!x-h0sA+ovB4a)JR*{-IGHUPsl8J z3r0Fs$TZYR!8mr<<{&9XMmdFbo81{7inNDewZ`C|XE=xCZvZ_aGi!msO6-e+Pxa>L z;oBkw%LE2+oJEzXL&I2(Zt_p6>ie47qMG`rv3C+Q;A15WH#JTSTm4WqyuP3!J(!2; z5pD?;_bs-2kv*)wkbHDkv`_eye?wLZR5xFeQA=S+b=>u`SNkf0z*A?MMY>wjGbWcV z44!?=sol)~_RkAg;u&Vf3rTFCMVphRL)I#hI`6XRzndsw-hQI?WZ)mOdp4Dz>DvC& zWtWT@zV3GVYh7IET9{u5OXV07>7N8iZyiTs$SqKFwks8T29SazW9HfKTxTmYch*vo z9@SHg=aQJ~>+A7?*Lj{0fFqjTg#Np|0B{sSmGin2CKP!AwI88~NW{D&v(Qh)KWUAo z37g3Q{B>-AZ%}1r@Ry#oSaY6$Fb^MAy$d$)?R~DiSIOU5m}4%#@^)V6x3=zkOk7nj3E*s&COTskX7DHkz&*bbgUsLT00|)X z=amaX+TiwfWwW?n2krC)W3+?fQ%85w8qbAnn z*dPLmBq9$s>Uh&XdPk@=Em8IRvY?zh_35*d%tlGmm!e`F$%h7YXGeZAu(`Q8&)qE} zoPRx$1285F=pleV$jg~aFY)IVQ28G8!AA%ys%Ii8CWs3@pgyR(e-RuPFuKvXxfhE9 z4bAkyldOR03YX>ZDqm}5Ly3G&l=opyyk=1p>9-4B=-weORzVslwL4!ILbo}AI`X-W@&v+BbzjMjrC{^b`~PhR;5{|eRp z`O_2^~VAO=|AuQEJ`Ax9q*xbx|uw9LV_zXw?2>U(~=T@V}mQa1FX` z2uMJJ9+x^WY6_qS6s|k(8QR)?wZ)ZUA?z6HBJAxg_$r`@FO$P~_u;-NJ1RgI4Z^{a z4ieog$Fde0i=AEZm#i)N=3XX7MbGPg;kJ{D~kJ^P^jJZ$SV4sfRHI|0f zr-H#Rj-KFSLq!QYoUoSd5ac&zQZzVJqWkYrf;2&BgPmsg<5{`UL@{I|mQET!wsYGb z(0|JyIeUFwyg)&@gDtR_&dT}a_>Q-;e-;B?*iaMgz0;JcVULEp!TYDe{V^1XYKq9k z5Z7m0Tj_2ryyQ8B_T8VkUWknSkS0kC4-b#W$BR*?E(^?%V|(BH^6PBt%WNNb?a*DB zMAoC6HyjF*WdON0W;rf#4geCSj{6LM=n2<}B0QqqHs5tjmf5sjTP+OIm;hb#05F^l ze!Dj``tfraE7Z95>GZNC`a|ijhIAJ1x{b;tqEWG+#WXJ91XwuRbk7lIR}&`!<+dJC z#wP?9?05@_f~Q(A%Bhi_4xcVl*M;(Wp;P5+=t6 zu;lAMFvPLxlPV!`{CBP`j>9N_kdu#1sN(NN3L^&yuu?n zQ&akFkzcThb+&^s6@3YUcK{tvJK_%fR!&9ry8xexq%m zeStM5stX_otzSM!M+GmBu^q|P-3u`4vzIpOnTAT3%cuN3T>8_{7tF3fAI>&9n#zOD ztX1Y)UM?JTut!pFN8|^tQIkqJ1`zncKk}lL(UN5!-zMk+5ok%{M`ez zT{uWp+2YyIAwIw+seeR85Iz(*jEo-rZoHg^4_;bPmi#^?=EMS1=X_^i5e9UjKg+h% zQ)|(xR0c`2Km%$;b4laecVKeZy@ESUlc>#xAomUZ>L=q1wUlm;8}uxW(pUi;W)ebf=J&0 zpP3Iq&quq_XQ9dGSS|h(YLy=a<)^f%f#=y6d(o8+DC!y3fjwCJMc7OV`w6<&x+$@$Xi#?9+k{n8D?;wFYkm}vXKAxOFKPz_qCgP`u<+sqzlrpqUB$aC$q9z| znOM&*vN6?2{R;SbF7mi&zX4Rl5Fm>)z|1%DWp#xb8jutNS~YZczFPL{8=%5HsSZSl z0Dt_8ZMwe%jB%mW2QU#x;G^`~>gyh^TD+|aAtx4aiyoFAm=^(}3LjvkAKW2A9%2c2?$Uc;P^X(gg5`>7~~2 zXqI~a-Dh@?B2?TSFNLV$z4eMAaC zA1=!^DbwPeeDLqA3T$f13HG>o^v}!VuluC+8G)0r9Sesx2fsd6^;D9jq`TwU7F;(! zSfr)su9m|P22KeA&P(%7sI(}Wq_Z>2x+%kWc~r6+fl^|~r@Ls-EXR;IzaU>* zYh2n=DoTa|t;?u|`=SaZ@yDnXphbrPw9y6(IdnSu08FM(0-(}nm$Lua&lUa{B6N%! z4pp=EnkLD~*$EdQ$F_bMCn)~Cq%1kLcYPN_MR;a%LgF9Z%m^!+xzbJ&s?`OYQjfNzhxIg7DB2GLxLezGJ;f>?L2P78&h;9{1Kk>!L^-Z^D2^$ zM*~BnKq(M)YK8qNDo_Uznj`yIGf0ST$cPY-4Q8tq>Jti6p0KV~0Wy_L@Y45-xSCKn zFC|z5aSTXU_JYJew$qc1h4+jJC+5!qe~85V(iN$YZev1Jb}`J}JcTW8UT{Off>xMF zw^1{8Aw~V=K<4Uxbow=WJ+&ws&YR*Hsf}U4SD@SQOL;@7*pt4VdvsURzyMlcNC;z{ z`0jM41x%0{;oC3O@2hIHCmmzklk^gq1pUCC-Z=ikVckErIph9!$E5{IRP3@@F(xO- zifeQMori_9Y?xHR(lnBiLt19}l>R`~89f-@^C?qG{+3A~W^?JgPrl>Fd8?$$UUyr= zI!R|eAJ~_j`H#uJ7K|r%Rbo@lkaLdhyB5ErF3ln2n*+B@ItY#nD^^#_Xhr9|gkZ)$ zdorn^loJlqBNL8<Ks}@}02SYfe;VssfsWQXDpTM%7AMZ>MFg$SDOh$iCQga>i<;gtx%Nezd z?YUcdnEY4D840%uVb53on;?M!5MmweB912x)cLE8ISlX@reL9rtgJoo*cc}h?pJw3 zw6rH3bGlz_fyA`Wa1s&Pzm+ELd0ALg$sE`eMDCAV>FYB_BT|nB>@2jU9%HctKa%(b zezqQ7ZFm?O#T;RB0uCO>wwqCW05&Xa$X44K*Ddd4Oh7^~NDG8!xRO zsvJMn$lPuyE=v%+!B!!^E$NfQDB-m9P77+@ry24(&{ACRUb%*0(T#R{Oi)k7cJl`O(}* z{7MGoH$IfXy5CGYCZs;o0}Q8SL1~%J=0LFjy>;5dxw(?TGkIEz)YZJ%>tKel0~op> zJYc(M|H~wVPlpc81WJ|sst7%>1b}pWnnmSakT&;W{Cz4NzY`0n&iOmEx{xqhAI?~zvXBv2`#l9B%QsfGiEQ$fud%x3#kn{XQTNZfBTJ^a4QpHFGE3A znbpfIMW7XX8vH`1w!<*}>wu(dBw%=u`ybW?b{!yvtl*_QHmtdwVJ}XnGi^3xZ`UnN28>1 zA`%n5NH{->Kq*Co3a@W$6)~1d%DwCX-gXJnn|8_owHVu=h#fHgj_msNoh#=CL61Pg zb)BXd@~c1rl>O;J=HzW%5O{#Z@p+Q_7P$?9QmlAJ--~QsGBO@|qMGc3`jbMSMDv-Wj~gM7W$(HG=r`bmR=Io)k?-g$DqQhf*(F|D7PCXA10;meiY@sO7AT{NE5AlQ z^X!kmq{^(_k5A7)lczPI^udXVV0@_C;Q{uSn?fT_y92?;);07%5h3)##0sFu(>DrZ zARf8P{7XVcAu{%Aq9iT zSA^c)36wYY{D3#5MXtn=y%11%tOrY8jgonRvZYr13vY((9Z3AZ!E?9(Ib!kf-;K4k77rqkbQ zX=-W0{uzi7NDz)r2xiCP-CJ^5*!!n3<9Ugrb!}3?!xgSV3JJ9}P2ndcxTCCw++5lf zmJc63xRc7|8NaH}^|k5}uK3(N)!*~`Dv%9}Y2a@l=by1r^WOu9fEZAq9d)cL9U}|y z3A#<-b{Akk2$NjGHY$(|7k!NJ7Qx3JdBlnG4?kg?fjVHUiX-EC4UJRz!y;O}v2 zjm>w=kzNjOTPVnYD+AGGNd;B!5xPw$t73pxdncIpyA;u+MlH+hdW*;rX(u&(IEIciycPDnH`fsmaD?XZvVfnO%p)-2L%FV z|4^Fr{^Yxw&)Dt)CXwjzZQgGs0W9~3I8)IX8z360VsT#1za_`7Ko9LK{o7qEg~ws@ zjF~3LjrA{65V=16Su$2__(&l%d$bLh$dI}JvnC8~DHmX+0<9l!Gcp~?`)&GmOb6aPQLPi(WVo?-QK^2@`7bA|L z8xx=J-@ijX#$op@@;~k}4?GIuw3q5$ zfxGblp-b;m>lrRX)Y1xDf8*sSoa5K%u_k3tM|Pxp;SVoM%O?ZjuhYyTa@)XuqJAWo zA8+2!gK{-}rZlJ+p;hf#yIr^e)?Z|-;G&Nx{q|Hcf`07;9#gv6DFBK%F%V~ZB?vox z1X}+5P0VMoWqTPwsCULX)tq~EM~;q^lka8f+9O}X+;2*m`5nN>`Tz{35!@!4`Y*v!Bfs@obdFGi z=x=B^O_w!W@64>UGQ}g=T8H0nzs~a@VgjbvJi7dtI7CQ$5c8OUrO-^MUr|y#Nw_qm zngpdXHbUg8T@kg-Sr5XSE9^8?aR%9QZ1h>Oj8DSTH9V7z7SCZ5 z_QPN5#_wO$j=Bdcb{ao#C-6;^dhvDSSnlvk-V9%7t7e#{Mm{+oe`jYa=C-zB!j*#I zjNFk`_{wryH1l`sYh!#;5_V5tUyOim!FdcmrZO^Q%;y*UI|LB$ADswi>GOU@-YF+X zqFskVi`ZTW=a4hHN=mPdXF@D#>7NAYKD2**7o6K(2m?_nxeNM*P6%Q#4nQn8zjqwk z)y>$a6NIRw6N`Png&Pt$v7j@{Fb^;e)5MMWG>s4_yzN`f@HKVj<_JLA*oInSdy+ekk7AOpU?~?$ZOPIqTL8S^t2YxqyA4Gr?8wz$fVzC#OfGlN5ZvkBO4r+IihCxRx;rloo$1iKj zhGhA%k&f@}$fenESB|azRb}8b*q+p?_|}48GtYhA8KU(}Nqn^_J3_)%|U;JvMxCj0FQK zUohdUBRBB!hf7~ct+%Z5^9vwD7zhV?r0n7Ql~T>6F>7SbJWYKL^uG3z2zj`;S#sR4 zvlwd9Bp66!J6>6101QOOggZOT7`77*%LEn{>WIPzc9MkQ#PG_|x)v|h^2c%~D;|?b zmfuGTBUWak#)VfczOOoHrB7}!gNNX13j{s@_Ts_^nC*YU0r`Hpw#uXxKEy}aqua)0 zl7^iAvd!!mB&fA_D6fL8|NCLI4G1;wbv~5R^|L&$_cPTHyR3Ea&;GV|2+{@^yK}XL?36 z=Jw7;XFsHP^r_1t=iLK22BuY<%Rsv04QhzqT*#rp4VCE>VJMWaVlGe~gKXYa%-v(Z z`tY#fR=^p~`qf-z3ICtDVi}L+|KG?0X2$J~&ll9g&f$I`Hp@7NeYjs`PolNzZC|By zqOq(l|1L&SA|`YH_#$Mu!vv+TG#|&C+Hx=%$w|UwOLyJ1r^{Q8Ud}*sawVh^z2e=Z zY@)>BOzL8H%s^Cu(bk0FWZ|6)y1r8>`>diuLv!@$ z_QNj$mqOXe+gdruZ*DT^sF9K1Ma3ieaRxQvfeK>-SBSURM}VOITuFcg*g5Vw%RD4mz5@rvE8Ezag&kuwY_wNgc>|=*l(O( z%M6>8ZOCWEK9+GLA_hIDn8^_Z%?@$Amff@D@6>=OR`zb8kq=iq@(W+JBm95f{TJ{Z zPUYabwVK!6o+;GU*Mx@e>Lxkb)aO!4%&quAamK;T%;XELIN4!75{`$EfC%iD$JygP z-8@+bO9J=#%~Q-@eg!om^7RNpmau*hAXh^YJRLyO3}drh<^S1r>8o8=Z2unYK>(TBauGg0azA!kn(7UtET)#< z3OP;hK!DL~@2nRWbfX?$?7I9TFcUasy_e^bvF|$VSkmdPHig7*t7l`n0(ySXSCE+qIz0;ku%u&^t2H1J#VR6eZz`#UZk*_ol7mzO6+=c4LU zoB))Ee24zcQvNv>3c~c+!o-xd0PosJ>OIZT zwfSNy>kfPo(x2GIQ-<8@zULbRxZHP~tanZUCqrJ!3E|gvfEj&cOg&#Ck4M06XVf5b zN8e+99xnCKu;K=pR#lS!{Sw`3!CcDZJG2z&bolM>V(L+^JC{wpK#LtWF##eFBumj> zgCrfuv@c}b9alyD1EMm<1yUVDx^(WbC0#u5N+s4?89gn1^sq@%NOkEM_Ifl7i+(*u z>wFzb#HYVD1?x zxJQrFn3$QXO}deQcROH$f`XE{EV0-cSK$`F^pT%lY#@uz=Tdg@AfWT-APNczodGE2 z#>J?ZoU$_3#Kc4uFj`gkyq`8SDymK~2@n#S#qR@|GFVRT0EHrCBu=kwjK)xM^nUQf zXH`cQN?cdI(EQ%b=HT?RxP%3b8Z+t4;g*_iuGS@>SJbTuHyf!lDhjF z8@Og?)@S&c&-kELPY$onZ;NVk6J%}A?#PQB!S-XfBA#TKx!uc1cz+gh00zih`h-ib4wvz#aN zV<(TTIy>1F%u5~`R`2HLZ)j2v_y2xYpRcd5fY)xd>X4v7e>G1)U%ouK(zF6yu>2uX zT)&%?(o=zav59 zpQJxR3m2_nekA`wM2N*F7eoXIKYhi88P>Q^}_8 z_5ZT>uY6%aN@Q2?34kRPdwJx7f3jr-0#PaA(aJIjD4-lx!}_x(6NXjY^+`OYwi8Ym z)sOeoKa!*I=|NKM7D6xZ&*NZZLpeqIhH0!Qqu|>i9>DW@emYKz$=4x_6(!tS9qjQx zY1#W^F>i}n+SHGpbSx&QaKVi|SGa@L3M1sZCf+Og(b0a$CE1l6PfE(vsZD|5Om62^ z_&gQB;?)xu9ua{;6ZY$l=NFK_{rJO>&kn?$w-%I71=lc~^ZGG4R3|blB3C>i#MyOJ z!A-Cl1R^ofiBC%5lVZ1Y(7Z)^)dX(@g_vhj_*Ts^Yt7SBW$E+7DBlQ_^T)pNrMN-5 zYT*{VSZ)v6X2Gwj>^>3i<9bIMDeWn6SkUrz$5uGKI<*G#!gDd)jnrF^+XK5n^CM*5K)4h0{%dyz-+-;d*+qC|EaMx5~I zPHCiPB$6EZTxq$5^zJPT{n=N$teeR_zfqZ!e0y}*-nqmcFXLy{e#7{#;``8gJRvM} zRfv?Ke%TFR33QPW5rrggzQG}IjT-NmPrZ>S@cJ?AD(Gz3mIj|6M5EI&$694MN^xCr zb9EIo?L`aEE}KYlCsf4LMoBN{y!5Ncn%)Bjor zIe7Vx)F@yS^Pq?c;8pLW4eTd)-}2~Pg!Av+=@!d3Z<0C1_p9Aqje;kzsE?Y_*C@#P zbHr;hy)cPymTd{kIA+9vUV>@cZ^ywZ@=U^>v}B_Krk9~K9D3g}cs|vpz;X^%RM#3w z$vsKbD__Ux_$CYRfi>*dUa+o$C=bL)cdf)Xhim}$9-2nV=hDvuQeJDwhrZ0B7nF_{ z8Ax>{*fL@(F?)qinOhUpfcm$#^IL^je8JcCMdTHh*r43gS!PhgVytlbhL&R>LXp8X*^W2oips6LM*UH339{!;DY_%+T>DKltv~a`EMFUl2=51 zuuuy>MK9O8JMj(R_?(;fuUt_|4;jL?Gj6DkRQJC11)J)A{@O;V0t!%0E{^9T!P~*2 zwENJb?8Iva!I8hl$j&5-KyxKvFWL@Ac0kxDx3|(pYWL-P7X-l{116;w+L-?wv$07*KQlZ_@B56n+yM#t(Mg5hh=y$ zKDFCSuPXn3Yd^hz7nknUzJTYACm46*ItMz{t`et}??AWaSJMO=R(B9;%WC-+c!4PG znuflD*a1=$v@Q>@m!Qu;@D*QK z=GHYg0gBY$Uv}25Iz*6Gs+93w3c7bQ0J70N2u3XE2j6G@#(y+n22&pvn!u;p+BWChRxrK9`Eg zH-1M?B$He&-4H*e7yr|$cLUyvQQX4E2@nP2>Unpfdq0hwULTX*i7w9v`ro1S*YZJj z-pU`A+XdO1AZ4KJQ~c$dH9Ihk{tgP;a`|_3Q59L-WX{(^jcOAq$lzQN&Z+Q2pmOKS zOgZz#@Sh$k%6dmu^%ekd1jK-aZjb!Ptl+2+Xj4}zFCO6E4vU;e(!1=|pFQxFg>~7$=xN2qWG1G^u-X`8{@{MKe6iHE@=#VhC*}A7PS_0s?OWn+8jm(4(eE^ z2N`$vt1m9Nsq=`deHZ-jC~GxcH|3DNHIsV`gsYVooEwTeTtU#QJM!__(z}&6?38Kpm5jeLSu*_wR!T~;!$r3dj>N~Kh4+); z@6EJH!uVjMZEg3)_o5q08a{hp+}~Rog$NEK6B{$Zdp}%j`4!N>C7m4}`blkK!XfP` zw1tMuA$5@X@vu@5nbaZaRKpZEaiYm}e6DcZ`JeIpuR@q z2HT(hOlF;)1kD!DiE>p}8Jh|^GXKJ^4hTD{;MHXavnK}eg3%F@V=FQk*4)$uMiH+S z#*Vh-c}J{dXhqZggzPGx^*39sxuAQN5oHLjB*^ja3P{_{4%cD5jZ2kr&#UTDW3!`+ zY5e)^l&I01q?FbRFmp*?gG=q{{|K5Y>;6pU4kKswf=*|b6(K)K)&It+k>vwZ>&W}P zcn#S3gDUJ5x+juqQ-I!mqY~Nn1vzY5TX$?mIv{c1d8Y1MAgU~?0WISjMtgHX4HRc+ zxA@cJyPwxa=mkn-sHG9l?(;(+-j$)Sn1vDUp@h@FuG+MqjCkINMt5u|Bv_YY|FTAJ zS!rzV+@fTGL!ecF!f@Jw@G7(YwYi>a%LXbxIn6u8GPjEIfm(!%m|RF3r_&HX;$3JL3HD13)M4lkQtjKXv?6 zq~JQps6v+JXhJUykm{NsN8B;p$>UoH|3rNJ-sBqB3PS+)07@qDz!xsbD{FZm_I|h} zRS=uRf7%w4|KzXjEbQ4>ZlxktNF1a_VDv=Hi4c}QU$%TsFycJ~)}7ceihav$mjt^~ zsm{i=d1iu!*Im!qN;Fgnb|W6HHMHiE|BW0bm}qzB;nGu4s&%3vW4rvKeAl5UpcvO5 zd2s}Ki-}+Awmgaq+|a#tTE&^c9@sWMZ^TF31|J_&+wspsEVWo7XEqT{hPzjyKR2~I z*Dmu}lKHF?7`z?Zj7aU}LZ>Po_9e=KCGd43W;}T-E4C!WG zH0K>Eks|tY%k&2jtEDE`lZ3D0YoDf}_dpUV3d!&6D`mX4Iu)A{YhP`I&Tb|>)QyWG z)>6EY8WQ*GuPHcUG)e|N)6#;^I16{7LlZ;VC*8&~RVBwQ&mm;@iKS^*aEUR|>EUzi z_9pj5!JAvzsK#g5sG{4){%;f1SU%76G~z#RR30QjvCG_GZ#q7o?+WM4s$?+wL07#p zdxPl3rtm>ib`?@6?i^@+Mtb5X)Zr%-LO$EJd{h%F(ntuIG+znMf7C|rhv>}ry<}mS zqm&Vd$><|;92 za8;2gTfUc(k!RcqkC*O@3R%?mC5i0MvmBc-LFwnYj8Un#oQ+3V_7{Vn z#?guXO zC4j=wP25+G5MkpDi^+tQ@@eiPap5>27>vxf{%|^3XTiS*eh9gs6si?!L;l;;%{~h) z$q1gSI%(m&n^3L0Y4bjHhG>WD*K)dzg`wt}PkD@7SZY6)JidyK8}4A4TKn+WbI{89 z?P;D`G$FoAl>@h6=P;0F;R{eFOV2!?Qb>$ku9gqFQyqO;yuzV}-R# zP9Pekpg?+2Klq6H&I0?l?(r+*O&sClC{dX48GSLY?v&2^C*5I~U}o?P(KSfj_r-y@ zh>dhi|E-{BFT{6!+6yWf+P*&6PG=v|;XcBQ&1~88tLUJ0tuE6ozbt6b3gwgF9g6=wLPWweyT#sBnU1#b9KaD4AL%5^` zQXvhK_yf;+X>QeK4+d7?WNI#iEGV|Z${haa)AjS?f3k}X5BFa>7%=X@l`T`(M@o~9 zh?>G&&LBi9PEMLr6Qf2n^EmC3GgQQmIptrbADN#PK?1^TJKD;QiUb803i=&dW@Iq` zu$cPz<|fJLy-RiTub{Z^kw^M@VXb0}?BnPkew!yuhx@Sob>+}nNy&YwlkPr=Ry%t zw$*Wz-EQfZ1R|@}jyB#2VCq-(TylD#U3~< z+?dlq>-!km-^PIxChAK28gOMpXX#CkvmKF_sHHF6${vU}am*|y5*4%GM}|guebc<` zBKWZ5DxKj>^CGSw{d&Cb=z7_1Rq^JZZG-{~jJ9){-+e%19nhWn$%kjOVqQ-=yOx4c zVL_3bxL<ArA|bX_Jsq-RE0JNZ%6l}GcK7QV8<7QQ|!i{r1IaFBUlAV51Pm3S`q| z(FcPczpQZbHq;=PX~!uAw)TJ{Cx9`S8suW7=%w|xX|$zJ7A&)};U0mEkAJCpbNhoa zsfA$T(rB6AxC?K_^b+9tPNWrFlmxqV-mT=T>+EVZHlJ*7G||D0w4vPEOi8}QbaOW{ zy_OvM5ac>M*-nTaulZ|Ics60{M_YRp6e~iPPkJ%j0 z3`7TmCh4SF^MU>=f+pm4XA;3=imse#E?FV6WTiLPXY2?nMa>n9~n#am}(t%h#AyD>p> zd~g2*Ofv1=ztga4t91LdrU}_&UZHLTKFoCk?PN}k$pg$7Saq#gINjYqF$*iR;)tCIN0{bCAk9E{B|5IaxFG=+1Ypr=$n)@FQHZ?X81)nM}PdD7o+^d zkmo6k8HN+@AiS;mRnP}}yYtXrayB;Tf;Th^k&SoOpVHJD3w`r zN&sFlRp#a~LBL@eVT+sE-iZ>uZhV?oZrAhvvAf5li1AzZ=20?Ias{T34}MzC8^hK0 znTS_!_TgVfaYbM`$}8K{+zn^s?;j;vh$d5=c)n`u2LBBX)Vi50x%*YPX`itiu8{|; z5YHvwQklu#l7P!Qu6_~ySyXk)rzrcC+cpH6IBcuR_Jd_~j;n?*d={RD;Gn{^G*Ib| zMF)MwRpeDbTwV^)&N_83{ngyG*aRFUK3lON9ZjWOjg*l>rwy}t}o{P1ei z_Z0qz3jhtf&?jsrR5IYG(tV3vNQU>$Qp`D%{?Hq(MM!6NcNdlOAh!xI*FY$|>g(MbAv%U5mq6zZIr9r@NFMmODpWb{^@EC~y@<>@ zCPRS#2NXF9HiqbaGMV|9u1{$Hrk{9e5Mu6lAg=OBr2L|v;dUtDilHBn=^M)tuRZ<) zQ6PE3BSmNd8p13@|G1d5-R>mS88yAP5dp!DZwq-?_)x|k%M6s zN?+KwGg2*3s|{V4vcoCK11v*t z3aSYz)uh-p&un$GUooW}ey33>wHK3_{$3(05s#lDVfL9LOu6n|wK0jPKY%lHsU^ne z3Ml|%zlWU`DZxxwR`-(d{yl92qpkxYKVJxT`weV^`nX#GDm5#7Yn5}7+pGtxo5LC)9 zOa74=c$dOkei#kw5zmJF?)j?5)x;{~7jM28Bl1mFhK5_$(9^d5v;E?8O{X)TaMS6|UuNTUss@o)`S)2#`UgE5(3`Ha2;<25e&I(X8XxXb^j1H%V=3HMtd$xMey!T`33Qk!E8iptahg{tsGNCwoOv*O z$yUtA;=Hm`JGPgcr#sNE#FwzSS=x2+Is@mSl&4LF`2Rv8HVi4C#4YG~P6rW{r@?vQ zdsP8T&-)>62xYr@LB8d#8)d%hO*%j(vS8~e;xmyQ7*2RTJjT(~WEGJR5E}^Us-@#e z|44UZu%}9U#m0Ar`S5flm;ULK2Zo9^nTZK+!a>FF>d)46tdD@o>S1ncr7NVz9|lw^ zRAsNLc7YZkt`I8b2(`X`ba4?S1%AXSn*8oR=`gjZ8GePK;KcS65bBO@gxdXsGaj!= z%EyQfG&{McwqAki73`n$4U{_wo>QiKI%^^FSYzS6@+PHt4RC!KoL~35x<7|5-e(Qi z9SC_*Xp2Onf$fAOE}wcK9oZ>3F}y$beOIko&T@>lL+IbUlZZ#@qN(8Sq#*#54!7b? zPDCA@#Ll(c@spkaM)&(S{nlT*j@m3Gw7@B>qkWC2jg0gUqVY3ZeI07!8@VO08 z-5;QbZ^*CD{ydCBAER~{8ubK@f{B6}EbDiCF{5$M|5V9c=OIo0 zz9&c{mLS#cZ8@rpMe2irIN_D5UKkcRHwL>&=q_eldN`E`R52DCswjMp`k;v?ewe3> z&pssl*^nr3EoF4Ca7U4(kRM6b-^wp;!p+Ix4ACfiPGq=9R!$onIfZ|ZW@Otf(@uC} zA*T5Lj<%fykiAZlu8%~j0@w-00vFfNNbVQ-)OLUV2O8#;`Lm%xNq;6AB$+iHT`365 ziG5BkxI;G_X<$MYQmRR`3ueB8VZ{(5vDn!v3=ko2bUv6M2CFnd(i)N&$q6(dE`$Ky~{TMTsgMJ080eA@;I{22B9pMIoQH^`H?OWXD&JW03 zpD-_OGb`=wYf!*}$^g90TUZ^FE=nG@TJX?WHd1mdUSG7>sTL5m> z_woHI+b=*vx{8VX&Efg?PIqUA0RyH|`1OGG)Q?a>~?ANbNxD--b;Kya;F%|=ok71!C9ll+P2tjFKtpk}#ps;VQi?{zk}nm!2L$xnq$PHt8s zls83rjqx876_-nf)GxCt0ypQ1Zos=gzKy3J9v=RR!2ZNSrXSpb{|A0UtN8RV(yDy5 zuOe77JLVzX*K~3Y^?dA?_M+2fa1Bx{fLuD;_&)e@8=cjsrXgwjDl#IVeig`3s9yjE z5R2UrFNcBwyTBiPxKV03R%`meXhG*1^y|k| znQkbUAGvPBEa9^}9BS}f5K%?v;OB(OFQ&AdLdcl+`lIfw4*}7q#GLM&+Zaf^!DF{g zRX5g+9Pht63&keEUfbC~+^;HSxiY1Gv#pr;B?9T>yim_c1U`I(%?X<0K-n}uFAGdH zI_n_*!(UNL5Db0qd|vjzk0gT8a9(zWi$-))yw%R_1;3qQz*e%HKKDTQ&XGhZd|;sv z^D?c@W81fwMbsM3_oi%J#(TqPgX%l^0jhRNYmDdo+Z~C8(=Io>C%&IBqRDl} zw_R9kbXRZT&ZTyY-&Ndr{0^X*E~N!~KenGKE{vxCne5xk(BXFAiGll+>l;z^xRq$5g>&8%!$8 z%F3DDnnH`%TXwi*i4T2{<#^61usl?Y!|`eSu;I&LRo`Yi?_I02H=r;=Ta-0J>q7G? zxx>fdL+Dn?CnQ-|$>hk%TQi-3?k;Lg2+!VKC!;dIa5)uF+E{~+wZNR>e*DNLoxn+d zVGRh)H7AXYPCA3`d{GcPZWnYv!`seRs9T+SjQQOM{6ds9m5nI+V{_uc{GgT4sam;b zL8UqBtXba(DTFR1d0w_r_~_DOe5~hM9JbNk{MF0b#6D2ZRV8Y=MeBPDJep}YfStDt1bvnb0I0cLqloF}WTwxO>C@ruf}FXizX4>~I?<0zPX9lkNQYDyV+=mqAqR z*ibp86PT5TUjwCk!^s_}uc(at(K}XjJ(x9lP+p#m{JXuv*U!tr?`uS%sPJeE}#iE58d3i4&b@x0X)KF5bd8bBZ9fk z_IYr#T=hy`B#h?HLn-32-u$K)C4@3q7=PKg!r1OZ%hV@Cz+*$OyLjP)M(AgSM*P^f zGtnQ|s_M>i3y}r8i?+d={wgoboo4hO&7cgF$mh{7;pXEm8&S%yhY5Aaosn7EqB#>P zC!S)QN*tqstsuob4+MD+Xn#6B69HuDLH91|Qy;rmow=a?iq=eZ?2g{Q;TTLicM^M~ zKN=GckGKgrj?T-)r~N(SSPq2dk~;=OqEa%>r_^q-cRmzwvE3^bnF+@X`OpajD0-I4;QSxR!1PO6+~B_O$8cA!3@Duu~TdNKt<>U8{0tuhEUGA z$Mb^NC+FGL`!>4YrhoW#QnL3mQ-`NJ-G6v%EE&(XK!3?v@xg-85%myBV5KfxL8865 zrWBLS=+Anz>Xt@N0B%M44{q&gVE7}*wj~)!0npO>GL~69?A{p226wf!S{eiyLf`=PDCoRnr_^$m+ z%Oq~-6s!tbbpoE4UIF`LJP|vGHZ^ZBYj#rcEcgB740b-(K98TaEjNbNYn#CKENF#4 zckNs_UL(?n3V9;l+&{eKM{b=FhprSXE|>6r-Or9AT?=Z_zR$Z_x;|~r{;$ad{^gyv zaIq+oP}H2)aUA|oVAG1uJcGlO z$ER!{WL1}Ud_(T5fkAOL{y&9;7uX9ALsK}2Mz7~@`0sVopp!liR-1@sRudgr#G^CX zsX)BwW~C=xE>A+E!zGW|^VC<|vnaS`H~fdh6Z+ zm;lcWoJ@d&L#n5{outte+o~teZ)~FMrj?AIPguN%$1VPxw{RX<{>DVBH(JG&JGAtO zIfG+V{Mz#!uZus*;LnY1AfUd`!e(gSKquFCNNw$-0~h4aMvaAEQ0h5+f$Ewde2Z1p zBc4nHS6;~tr~6Y$?;3ju*!s|&WAHe)KoC{G$!+s+x=@T{TWioM?wp38-~BJVo8Gr; z)(05S(g1|ltjwuXgG?9PUK*xjQDx;P7#JA59xC+u>A|$xn=KG(PsQqNIrFPWsJGpm zLG`h5>B3!tT2n<}AHlSYq70)eRJd zh0NN@(AE}qUr5C~3Q6kcWR`VADdP>A5%u^bb<|u0IP@s zCuirr%}p{-AM4kX&wv=AB!)X1zu!pKBOaC9VFkkg<;Z4K+;=3<|#z* zNfzk&ha7B>~gK{9wwc!k%M^ zc<$fDH+;>_3UfXjM2IAkFwM83?~P8lc)MuG3~*ir`C74o)BJI7_0B*B)A@^zam#*k zV6%#o=E2VCuF?3pO$f$4Kb3@ng4&GcUN^$N;c{6+Dj!p#wy9WB zDpvdDeZlnFa!9pVH8wKA$E1o;S){Pd(4V8ar_HvgxH4?`7FPSwkG12>ZPoVTxJ_2i zeJdDg%mF8SQkhCU8R6%HbPNaeH&-lQOhcG|ATvMcGeM#pI$2lL?`_ZQ3Bwo@H>pF| zj}BNKq8KT4<%-81%zorB238!9NF8Ym>xe>J^ySs2`Aa1W)c*CW+CdPcBkDr;8K-=G zuT4~3IJN~yBU7%glw_uXVm%*-Ea?EopR2&pzi<2b@Lpm)lgu@{z_UOU`cL~gck80( z#YSxJ&=4zCB=Hd)+45R+tne43zPcw%)-X|K@28K2UWQMsm|>%m+^q4l=rcSoQXBYR zc%1ZrUtK8N=h;Av$BWrPbQa9Nht5W+dDdgMvGn9qU+NUX1}#e4(H{8F<3^|z&Q5@R zN4Tl4=PJ_KRBc?U`eZ-k{&+=`waLtzzG)cGlkP80Lo<|2n+!bNrQ_#cwe~A57dSYb zcYD&OAxSkKO~IEgQ8|Y5e}l520w*wB?OqyO;8!X*sna9+N%w;>j}XQ;s@B+-+pQ~V zU#*bk&c}c~UZ&p4=r2Vx%Hz)dT4U?-6A+tlWH7mw({9#*Bo)j6p6D&31UJ#%E zrVh1r50DLBASwiT8Jn6?cD=uO8nm*SB7bA+DiyF=(TWnFDjwjo6QG54rca6A0TdnO zJ77R@^u_RKhR$FlC-jFFYT<-Ulb=R)aO5zw34AlTP1R{%r7cI)i}UJFJ5>#^Ux6%w zY-wh)nmiJ!)1m5V{6qoT{B{NbH9U9LectX8CLHSeq}W{WHW5zVT%1P7VKh3fC-`{|vYeN0 zLt{UE(ZQksR5#x@F1xh!^%)5WZIA{5s{M|g>$AQgpv15oy==j79Gjv$xVjCEW)hyN z6!ooz!3am>$RH0JV7j9xuKnthNIwwJj?JF1g!A5dgk?!-0Z{OuK%9MT|A~xr{vnx zV?_DJQrA#-iU&||kuzKg1ZFy!HBqe_;3YNK4aQ_abpfG8j46?9l zyXF4pqWZ5rh44FV*TXgjP2v3;ltRuCw&iIjyw+uP4yne%ht{g5}U!TIb)I8 zUtTVdXjG&%s|leA5*HV7)uc>*28eqa+az#YtyUolgb$SlM;CM{k_PgE=Z z@sdRQoNaM`Ggnw!`;nX+f5!$x#S^gK;3~gEJN!nt3OBuBTiY4pwz0RgY%MA^%@cE4 z>&Te_X_!?&e}rX_DqAU6StO3jm(OhPGY0ixF<`fB30{5H`pW}x_uG}5p34y_*IMd+ z%`o_TR^GxCE2#DOkc{XtQlwYCQo~rzv@qvBz%P=iiQuaVtJlnSw3aLkCxHvDI+?UZ z6^S?~*Z%QY@llNh$SRw-<6$+t>|vslCG2P6S+2DQR#nkYMrrB- z&>Xm=Zkl~!o8yP*q9r)XzfWVTb=WRe(j`OuEuvWjQ9Pj5d?Yw9j74@E!5)v=tr_vbyEv%Jkx9_lxWc zHf1=H9kH9TE3$-%rZgx=GWF^9SsI6~!QVO-;~%J%4GuDx0n_Nx z+(#i02KP&&C#RS=uJPcQZWR|VO{)%a`WPt_B`6x3xOI3`=O~T{9e5zYl>Rcc?zH=8FB`o-zoli{Cf$G_AE!e zMg!-f?H^$q^C)^lJG-w#-EsiW8^tI^*%ahf8YLQ3hKz@blkBfChMAU(A zJj=v#%*mg}^Mrfm;nePtR&^X+5eQiga5((5zIfH!SK@#Fe(Z4ZOB|12hQfKv^x|&c zOw6;*_HyrFRGT9tQ}@Gjl!`={p(HgsjO_SrVdKw_Sn%euPMqYsoS{w_PQ%F{)9LFb zsYPkOVa+-Mv+xP!2|^@l&-my=XWPk0dN08$I*CM%w}XYlp!WUur1cYNAWc(G5dtNN z|KQKQ>a162e&sB@Zw|pdRKQ7)Eeq-R)h@4FnALPKaXvGwgzCm!)7|jTZd6Ko`?Bk; zfgP@QAK0`aMp6(?mxYF<&!{t*#fQAjR8-UpgJg@1%yJqxe-T`SdHx{aK!{+w(flJoJu*gyR)@sW3La*2B&rf2hz3TJ7rnDi z(R=>OdS_xbpR@F(4D=c?gQ0cntS(jIGJmG&>z1E}q&fa**}mwBJ|wm3nMrKUtKa^# zYbG2BjmS+Qux+;fx(U*>W_nJ`8jT@q<@;lJA|_tP#1vB;Gv(B-SuI&B2|1ahM+<$!X!xJE- zAjb$S%_qvsxS(+QK%+GUO^(qAVJa`8zVe_HF_h?u5d~6j${?rJNtQ+mpGy3uGec!# zI6DiKtb*vqT$jTf2-5D>B@OQMya#Nl%r2Q(w0}=DpyxVePX7oSV`mlUw~(2?yMuVS z=-WFyD)0H7yg|Y6h4uHSFxdJ?ASqA8tU2ngd^Q7;ui1#S zH%zkOJ*~WPWiY)u^V75L<{ozNeu?nKN!P05G!?9tgtE*f z3KmXB<|o3+|KS3}n3sMH?)IgZroSyj-S1ibMDWr7Xn5EQuBOHZr`>{MMBU?Z6z=lz z>kJP?$g{1te6#^uvODv44g$%Eqhx}iBq;{Q-OGK`;wVB>GtUG)eFKAu2W29vit&U? zfI&&MknyLjm%!8Mul>+b&HU*mC+ zt?$Qqk{Hc5w^k#TX3O$NFj^6U@kr1guSrn83f>=|uL~)`?A5C?3e5LU%ZT|qRTN4& zN!A1i{x#I-64LT%J*$qU;>H`um%CNs;W53~U%!@zf4AZK_*louc5ZG{44y8#)zL;> zPrj3K5May7u1h*xc!6jP&Hpmuqp7Ir!>2P$g-PYrHY0@kXpf!RF-1$v3&M^25in8U zhJh%;1dGsQciHQ(+^Pgs?~52h4#vGDxhN=u_&+aXjnGg5ry- zT~QGbm`wg2Fh3)c7?eEduf$;x+pC+Q7l#t@HGa${2FHa7PR*(Yo0oRQ^ad;fL>0fg zJ5xAR!1uu+@10U6=P?^>P+1o#+pk%0#N#PJq7o!F_}E7|!;~&;{g%0Z&6WpxHlQ z0EE0bAx?fa6ED9KJOEATN9yGtOgyT5@QnT8L}vq8YLqhS6j!Gw`ylnd>M+mY%!TM| z+^ni>)5Hos&43MhO{JM1Lhux3-IY6Tf?77tJpzO{lK3jG%zVm@Sv@(b6CVo`2&(@^>KhCzh9AqFbvX(wi zDs`##-G<2&3f4;-BHk+=rgnx@J0;;42QG{8wm>_!BSTvRx-6{4wBNg4@!u=xhJyvQfz0-JE=GiIj@%hH!ZRPcRb1o_`SRL51k5HWW_?(n z44ehjf2)kBCwxYR*AKf%Z$7S-iI>FQ%iSzW%;nzf0#NV`2WR$u)4F+LqLI=+E){D3 z5oSH~K$@Y?wsLOGIrkg~==+r*dvCux1XO>>G~Qx7-p$g)h?gi7E+ zSiDX&RMaw6>_TNY^8YW^-6x;`B*>Z;wrqb4l_6a-tlz;;hN}v3;)BT{*VW{U0A{$e z7c$b9a^QonlXoG>vZ9CUX+^-xG^hZdpV9VM)S48^Vv4R(5P|WAE_>TyT2L}om7X7s z^w^U9am(rzbQY=KK4FpBF{|i{+S!Tx@UZjPa?$I3am~I@wZ(7ov##1cWNe;CUc%r7 zqe%Qb;6>>ASuTqErz|H&Cq07!2g3Bhr3OJUfiKaBaTb1($u`CQ3)l1<&hB;bx;(BNpwq^_3tNhzL1 z6S0j2(!Z{Nz)c4(C|S0gQinR7z@GgaI=3r^x;3LvX>+cl!||iT!_9aGVBlaJJx^U4 z{bMkPs9o1n)A9~5rn$(%2F_qs2}NlakJ3>#MAh6WqEFLp}r z->+IS=^oeZis#B~xjJB|LD=6zfZ;At4hIaS#3gnq!(tbU5s^i!&n!Uo;afs+vH~9W zSv(Z7$9%xU`DL!8Zp+!lP1vubq(qrYQIpm4Yf42e< z+42!m*8qt*hevmHM`7ZW8HiI}ao`>OudZYl2AoT_K45;4z%Ahm6QxOR{I#LoIvh5p zT0K|LE^glRFJ231<1)@9(LR=iHbd2r=z z6|0dMXLN&0XBTda%`(rsyOT!Lne4oe^P(=wx@E%@x8X}2w4q1^$(FJQ zV<0z3&JKM*l6{wnA?wy=>d{u4g^8C&2=7npPX_Ao9;puQz42Il{E&i}Z81m&2r?v) zYM_OQ&;IwwmDN#x(6!F=lCe|Q;_!xl_cN@9Tn)I;5j%~vhM?uTOHo|&M(iN zAuhg=d69Iaq+YfTv=PfM8aO*o=?MQNfuWrkWhpIF{t(iKyWanuaxDRqhyOd}^5Tby z5^0iSL?5 z^2^oq8ImRFU2~`MRo%U;kJ_c>J4sAfr82B#rfoQh(n}eP)MVzP6q$ozR~d3?`Vl;Rp2VmZX|dbs>!x7Hd3?Vi59}=tsch9p|KZ(j{BXPJJ&uDP;}*NjIBB<0i9c0 z8jw6*XZE%KZZxx8%)2Y_Rz0jP<+wRm_yVpOlj*=HKmd8~!@oKKunmGuGg1JIAwlZR znocTVeTZOT+UKS)L_A?OMY+y$B9P1i^>@6%+X!V8cxZI-Gh}VbQf`R6%xmg@%U$G za{s+Hp6)Hcq>6_Yt|QOanyH6ZyZ?izTpaQ8rNk(~1w48GOIzF#@hqSHqm5FBLm}x$1_e}l2nq=3rN9HYJP|f>Ga&mWV2ooqM z$#7!jscqzh?d3$s!srt8sNM*jr}2R45)%j3Ng}U`zU=bhyi7?+ zf3Ix-z)e|_p=l)mCE|DH-!(REJ%zx)6!1Esiy%qe#Tak=zv?1h_^>+jQJkOghTTJ} z!)2iIiun($U6^wF*5PjOR^-^2dwwD1X@@EXVaz)_uEr1Bk<3~V;dC+@2#oKJ_B;Ts zf5&l@9L5ZQkEA2uG96-&NQmb&$=MX^mM~4iFGFHL>hN>QIe$YR<_EoSO=T){W>6Dd z!lY%8k)kdN@7?-e%Shfv7E73C-}D1`MWNAWFne zSUR1Mm!{%6Wq@EFlwHKPO^w4oq9zr>f*tInL=?h1qW&FqCd*|GxPvjr_&YxEwx{Jg zp8zaF%kclRNhG!O%~@K_?EdF*5= zLQz+$pmLjh>H!yd%fdo>sp!&FiAKsIpIgJ4en)(={@*0jDs*d)CYb3%K7*9MFVmzs z;ZA&M?ag~PX@rQ=6QrrW!Mk8$r(r8^WZ%xMua$yZd6gT;CZa2d9^xBm7!)<_>|V?pnp zoFM+4vUqrMV*ACwDYFKRi;JGn`$`QGEH5ib2GgWPD3OiKPfaPg++~OCrr#54gL#)? zf-cZPAx~*%!hRvvQ~KjFF}=(?1CqEbWqVMwtg?1v>jt|m&i;cF9S@ebXn)#Gt)dMP zh+>*&l4zA#(VFQm^j;KU-~(Ss>hCV0F+r#Pd@4<#alPYZQPxCTSi&^7e*QBAydi)a zUKZv5Rosx(*}Q^gZRXr}=b?tV?9ou%NW81cE+jcs()v;~cwmP=a zvANItdEU2n?GL*uKOj}txz?I<%rTB>h1B_BSlKgMo1z5BpIM_iwM84F5QU=1RB$1o z7+-L|bzm*_MW{Hj36sNtPqZ5G=6K2p9*5!HZnGT?92}g|Ze#Sk`d&!G`+|Xa$rn6) z5@U?%GSF`agj6JGMR;)Z{D_;%A)!1uZX6_vb(G440{%S{K0!I!)9?ofhA@_PyhM5P zgMq;jcO!0~T5*BfoBOR2g$kf?Sf%?Zg^YyQhqTBb3j7>S;p z0#g>1FDQ$;mkxk5;sF8TX_44!SkRTastWRZc-JNxfL3dKX8b{fVDNf>s@~yR)m~jz9vsy9d55@gaLZR-RGiE(opeUfEYNY7sq65N)4&s7W2XGBYJcpcf{{JtB zlu1B?gQp)0aWNrM!P`wF>@WNOPxVUa!i?q^UVUU^H8Bt(-=^G9M1HjtpJlM>Yl z-%mKql|DyC(McJkZ4!wo5?509yK;}E2lFL2?C*PR(i%=wBE3saMnx{Kj?Z#Hb&S?# zTUuK7=Ps-R&zmZguO-6+Cn19IBRS1W#!)#0Nprf9e;AYGi#aD$pwb8@ti`ATCZ#!U z!)`u6K|6bv1T^EnYJ!|&U~68>w6wzW8f-)Tt>pHMtMQR12t_CnEpHF08G3Oupolr6M+hBPkvm`*OwRH`&xi>+8x{= z{y4qskl&Bw@ynSUV4*JWzdZG3+Z`LdtcJ$qG%lE`gbzwU_Z*X|Q~>TcR!)|Zsr9+a zhLvNW8smDcbC)-S-wxs8q14sCB#29X8n!_r@CZ67bP% zw#KrwB={>;jEq$&x&Rs<2`hobn}}UD5bw?UCrSI?dBxza&|TWW*#+4)W`GB^pjj>W zm_i-8M78GK#UD$dQ-#BaXn?9kl>Aa}jub&fHN6>@r12#x^k4=B%Y&7@RUjs%jN0>? z^M%|RSThC;?)1xe+hw=|+Ata$^*6)rP4@Z_$wWCw!;jS;@fOWzb(Fsozu;;#j~+e~ zlMWL7cbynf&u~ry#FJh2?wth`pjAQ)?=yp##mb0;QLSFQt>j@T2l9A}*NN4s)9=Lj z4A7aF`+Njg@yD+ZD+xxh`t13IRCm8;=|=N)J)%8gH87hga@k%;82ILepBy?{Uv zfOU5?C8VQ+*FP|j7tdqBNLBE>BHG#xLBbjiBV=c@78#L{8s~8v`g-Z$Sh!ufK5WB`;$>ku7Ddbz&ILs zW6_St^{;=H3T!tF{RgG+#!B=^kiH8!QVahqnfd}4fanYpWn#1h+!b6IkVpiW@O6Xn9M3X1xsr2G@tF2(efti_8=A(( z#yk75e8cw-YQ*-_;fd>iuHf@;m#!F`j-(Hcj`s2+X$1rK96)3I1K(%|qC94HzE(Tn zuS?4tKNwlM*c2rY;#rJGJVcJdA~pdAv(E9;FV=5$M#5>Dih@YELn%t-Z>6$4Cv>x4?leryVGvByFuaSHAX zrRw>HTjbF_02(tKY00U->hgp;9jR%O!E`|fl275a^S*yVh48J#l`q2Y{?Ea4wIwgp zC{nctKoM8=7oS%rb^wcacm=EU?-KfU%Xld)-M?>M{`TV^O*(av@Ty99`E6C0luzA^ zZN%TSvvp^x(0C2ti4yZ$rh{GcyeoPxA9Cu5_li|-9$d!2Tea~@z{K&{pmVq_mUO#2h*gKxuYi9xFuTL zSeN^znp#ijPxo|*YSEI5<9Kh&CMt9jR1{=R>|&fF<%Qr|0BfVWsO$|TqD327d!me5 zaPZ6|p5BAjcIqe4+sK#S(EtJ;(`Rn`49=90EpQqCB{bjJqQM2`$-LAV6BGnC08~pZ z;yrm_ifX==!TGspFBOkW{p&V;ed-sd7L2@mspg7hJG?yJ{SHR6{1Cth3FzClIh`CE z3RuSinE~wE{^3jB)31xV(94D!Z$rizK($hDs|VgjNwHP_rm^?_1TP9Bam;8d>Ujy@ ziZfDYoSdX2FsX#{!C<6a6#Cs!Zi~%K%c{^xU9dKuoRR(F+5HQ`8tH4%#kEL?cNaz0 zM!~mX1At%NaGy|IOfC)QgNMI$r{H<3(a8KSv}M~dXr$7}g5*OgwjSQ~Q7Lb(asPT| zqE7#X_r%3=I78qkIZ2gt-kdYQ5L&7%w3M8@qn7dS&B&EYy|F$_!ai9vA}QnC;QKL{ z8ZVGgsR^9J+ip~py$SQSCrrxruzV8H3dB&@q8N8io2&gU!erR!5OF55Flc)mwJjLz zr^l<~zGW|3PfzSR`%9d-^zYN+jw+-H4N#${eEUH4lC9lud)85X*(=kzX#pdGq<%BH8v&{maVCCMmDmr;QWSg1#UV<&+-TU zVx0pgQVrJ#k_l8#6q4&i6kHZB9<)Y5QHA_&5OutOqlB`fLjF(7?_dph(lSmnSt?-^ zai2cQF{-;-HmsUw0+RyQ3hOA{`LpJX`!ZEF62tPyslpiVj&nurR(%-REVKYq>$-rOpajIxom~WNpV;}aVf$BuXKF(-YAZ9oG2j++?JBK;B#7t-Q)Iv zUh9~T*Jv14`r)gY4kXYLky30Unv>1t*TVxpp%=`yUe_I!opZQ+Vv_=LsYDZDRR z$ZBp&A*$^s9U--GkwoGU%Rltx=#r7C3wbLAN0o)X>}cqN5@QW3wjs!*zl(vbM#?$eXjb3-{0c#O?l$(QqZ3>i13UiJhHYX5c$qui}L?W8LJM2jZUu1em2t3HPl2kPNIsn7E)2#RPGnl9Op}Ri#PohUR z@T-rb0kC_bex|Me>jhBd9ET{EIl@TU@S0OX^7u((V)+mKSpg<$bR)Ms425G^ExYJ4Q7)4NiY3VNu!`^qwg~8NikGL%_NAfX?(O}O_9-nX4N{dx zASblEfG$FKDE+g0fEYAgE$Q9i1+J=>4c;~h-Zr8qY%_p=a*wOHPY@XCMCtmk2b}@Q zYL(9jOWLui(U`%R6YqDyw&88jamub_wIhH@YI=YjBpFI9@Tw7=?{v#sawa;T)ue9Q zKqO1?*pU;@ZUG+}$q^OVHJ#LX6(Z;rU{y}(>?2hQZ%ll)g36_7uPBRs5?mhu)GA|7 z3~8y$NKQcG5C5r%L~2Sr&8enVzikO3%$l5fN1n_NdjpoNtzzXOkE+tU9(8c`_sp{M z_|g_7p#oUPl3b6bVBpZ)1uu_(_`w!Y|&C5FOzJiJ`c6K&jG0t3zwPpuvK5XWEGp2H}Ss z*g3@N&0#_HAihFY5}wiu%U8Ht1Y~YNMh_hur;v%xrad~z7yt2yhesRn57jkbPKr^?51p~cN&4#-WF)>B5^oE`pCp$r@y?!wWSv)%IB~wzemw%HAhi~3FJbR z#e+fIDAfWBtWj0P2PFy$ z4`kz1d_%Xv1P?b&agK0B^x>~XI1IGOA^4-l-aAW_ZEKsG(Y>c{9zwgVwkM5L!jKuo z8L-Tz^#zs9DXW5IB=k^VkF!lZ+!;`GYZh( zC)@7mQiLI@LSEmM3-j_`BqM{6PDuKfmn45m$bvF_ILW!ptP_{beG0enS+Lr$Q3 z`-Nu$x9dgr&6PiH zMSzsC=8}Gk5W+!Vc4}`^tC-lqf$zwNhd-fwSN9X~VSRQzA(m#?v&kCa83?^rKKgk z)nDqyisgbbTZ%I)S3=H51@{-)Gph(<66ibpzIPKZtZRX9qDOh>I|T1u&Q!Acp8Y5n zOrnTbCv22@5F=&ss>}MiCVOfUDu15RW@wKk$}N|ig{p?d#mlK=TXr&7wD=(huBG;O z(9ghA3EfJ$yyjH@MrF1<7IfXh(t3P&4(g_|UXY34B$I>!%O*@`=0T@vl4KKHmdv8w zj0<5L$O;QhGYS)Hw@FhJ=R?v6|1``c&e8nb4oNKf649JzN;|XqR)n1qYw+}GWxsl> z^KAPx)atz|Yu-wWJK=+ys@*z3g#k<2rm37}9ar7dF;#zH`AvcW0X7KBo$idEv~&H{njKZ1R(`yg*lOLBlsTKIy_ld#Qo8Rmz_n|!-% z$JxW%pO0*=>tkCrJ=ys4^pXv_!|7`S7p&{Q^m&Puq{nbN)_&PPPgLw&IHc^*zT_|G zDg2!Dt-fH79^bzTAf_&!@j!f>{(b>LX||jt-u5gLiGwC38p{?YP#Bc7-|cDzGc#xl zK2k~mNX=mGC}o&rDw~}zY%73Vgf)JhvC!BVJd;;ggs9lnFGMVmcT6yYu%wMb`e! z3HvxYT6gG6U8kMHjA3CdF|C@^|@dhFY1pgkr? zod#uq9a2i-w>oR*B6U^B0M}1BB5x6DbiSr}Yp;Xj9D--uHamjBtF0caxnGGPO+aQN zTo$2>>1*fWWfE(6pB~#We%P(F=s_p@13S8(|1UPZXPFP2j94w-K5%j`N+ptJ<}ybx z2_m|(FsLee`hxFT_Gar`)EU3B;wCJr($N#N|NZkw=@PP#y7Ne=0HZ>o z2s0T|;gPh$nVUfowX9MB+LJa?7A<@*ypsrH8dQJ z^X5+H{lyKZfPksg`%QLCpkh&9SDx5dHc$*>F2v1mj6pop1o1&CZvhB5$h~BD3C*;( z>KEml+L4s`WGYnbVxzDE`XCoHoP`3dDU{^0r)SI>m+{i?LOt#^P;Pa78yD4@``HY3 zC6}ZRTCd!GI$Q*iKpg${E;e8OUuh`KynKYgN&>KVHA*XFJ#ap`h2Ch}{ zenbSc^iMjv<N5UuRKI4PD0EdLm|+HjVz`G%;#v6?SuBM?2iLeVbU)+8$L7mDVjKp4zC9z;+@wb zDCaajy0u?OK@^`@n|LZG);~qn`>WU;%t1kj)%vF>3`X%W0fKoi%pRmW2^+ZY!fUXo zlc#f|w6=tbB#DE43P08HL?$+w%FvF( z?8gh^J1-q%S7cpX9lOIGm|%W(aLEk#D2F4;1s({42&uq)W&`BJ#eh{D_Z3ej)eAyL z7CdxUz>Q@RhK;Cr>n>J%Q88-bXBn`<2!jfHohb3fsRoe4ki)^I?TT+h`dlioJWe-O ze+uc2d=Rj|-p-iw>PAX!cN)x62F<8;g)F>D-K3)6>>QYl&lpq@q5g}{&i;{J0$Rf- zVt{hH>^s%lKG!Nzd;$+5zK7x)P;p)pdaMU$hKqDYE)4m4t;kx5m(k`4Cv!T=@o7h` z_xyttnd{x#9?rXK9udcA#~{zK{ZUL=*(X56X}dR-kGi*VkOJ{wCUqWf6h82vJgUs+ zo-PXy7FsC zs~I|*V=lF#3)}1picSehUZus~5Z1Kn6;$2{O{X)%_eWxxY!gDnmdrfpJe#OpgsCx% z1kA^C&#yORS$MEgkU&^+#pNRtV zbe^S(WrKUSj>Er%&V9JYRXeMj8e0nP_wlgWfyjC8xrlKk`h3B1Vp}6>=Jd1QbTbU4BS)xr zQfikq83602&Mq= zF80pQCN>LGEFvcI;nz=qn16B9SsZhNnU<(LwZWI#C3K_Z2f2J&T#j{7yO}=-R1D>u zp4WYQ81@6*Jwlh>tm7h^Rf1z`ZL^e1_K$8tgGCOLpXFUc&j$%p>hF^(;#zEtLd_1B zF~-Kg;8AFAG`91!odyQjD}uG;?JMc#b=CE>bMVe&Co}gw%hu88xAa0&NNwR;xvR_a zp7~_~;m>G|aJl}~pJ6^?nV5QCt(aK+4Gy0#mI@}G9AM^;WkG@ePA;d|zLp4k;c$zcS)z$LbM#~iG##ee-r;&_s4n zK?f09ctm|yNC3{*uN*OvVK1l*ACmTU*@AOvaP5+5VWU-DX+7^5kG2DC#Qjd}+TBp| z|N8F`iWA%gpf$fZ0)W@U)62lk9@32;UJZu0Ux^`y?~8odJ(h;;i}hAp{jSx>cBDVt zDfUK%R4VY5xdE%7!_n~tkrQWf4d32-aU5g2ARqsR-XRht;q{FIfhQoX?MrxUF8X3e z{M(2;G2<}IAiZR{Z51;v=?snVLD|ItCdRPvFVZs2zsfKea#(}NO8CD8$W$IYOV>KE z(vR&`m|AsNpdDix0-IKJ|Bj?8blqXD@s07z%OlEWaRwhwq!v_Osup+eoHpdnY!<33 z>Nft+l>PCwvvhJs8KSq7T-(4#)<+7C0>Tug^bN7$9@S|uPbWIHVW3z3d?WM4t6&rWKN3Qj0|E~Z9{UaBP z*7qzHAzeq*kA(PS&^AZ_&HFmB-%9}}t?SeXBf=t46x(N4US|CBp+b>`gv!6rsfxnv zpPik<3oB|$XE4Xlnf@6w+BZ#rwkb{>C`>J8y45pVVLAMJHA7za1spm;x35U5Cs=ws zHXk#BPSTPKa|W;|$0jgHRwGl6toF=Ur3gO!JOuTO5y1s`Fykc3l!wMwPYrd~2|{t= zxT|JZKnH&?*)uTUMO!}JOrNf7*F#3ha|5!$t;pcB=6bQ#1e2GSS6W>ivhEWA)&4gQ zU8ECZ%@)oX8}A65Lco$QNSulZKChG%gz-T4F)7+yQ4^je_jMWtolK2`7+s}e7X^m{ zC_ut-1~iBbgmaElT%#evMMRjBRLsUEFspYlPYpyIfvF^zFa| z&>F1AZw+?1io(F2L)gP*^Y?SvqXAwIH^$$xAQU0VSJ82@hD8O|x!50wb8yp-bUhhy z-bhE<;-qO4DZ2Dj2QIAiCe*0hhqqU|JBF=3xRpsJJrHGCID)3{;VM;}H$;)mVdA_v zj+;Hv<%tA>OPfKZ8pSPCN4#|7?(kazk-6ry{taTxxY~gZR97~Gy4MH##dTL>Dfe{f zQ4`)sd524}QnmVIIah|nQsvo~=7hBTKo6(2?D<%PYQCHW4jYvyl2AT-8Xw1b-$>Yi zA`49Z!Dq|Z!wwR7|I3kNC6*0!Ty?`phLb99Z5=`g5AlLEoxzSn>j5d=fa}w9!bA_^ z^XrGS>}xt;q8xS5rd6q_b*#!L30!|J2GiB&9>&?u>I;prnT2O1YMsADvOCwbwlV!xe3MnqY81j3L z`I!(k6cFj(mtoufV~#;1PI6OvvRE8D<{Y#Bfa*I2zHQz0qcoU<9`0x>jGA6b-=c^l z6)(TR*t$CN6HRN!kpDb0?;AOmY)s#^bF7f%-m3v9CNosQLAmnT80cu>DbXW@cvQ zq+~TbtDA@i4rZyqII*%N6`zQm8yvCe7Nm$3J}A$Dt1i3BJEte=`s-Hee?sjkTN0+C z*geD+j1FCB+xH)Uq#BaM$ru+6NyYeGbYtQ;3~769+PC8e=Ehq8F{)ug#kb7jb=9>y zeJ8@i50F)jvP{^z{GfmZ%1I;nUbIEr3sL8PBswUDDPuz$ATg(tg; zu3pA3`{WI2f8HRXHCGKF%Z z*vW5yb{eEz@sH?i*}cGm6H7%@KKNL+L@Xfw!kdgJ#l3sM228&tk)S1WB#S@1bFCFDdV}>R;d_g@;dbj!}z_i?t2Oii4(Blg~vlw+5H@mH8eDU z(Y~0H5(;-Q?+>;aV|I4zgP)PHUohEQce}eh1nH19Ll?n02t`(^Pwt}Bpx=^VE@&jn zi-$*qEd4$eK#s8=az;bz4$@W9y4QL;<|^cg_lI=SzOIYnMrXES5^<>>((fL>XFi`$ zCTihPQ9u-x8spK?|0?@)TZaN#HGKONM@kus`$Itae!tU$cx=g@&r7^0q!iR@+-$qB zSN1aC7cFC7n(BbOPj0{PwLx#3gx0TA5|OP`tdnr4>5>5GxfrpLkU5@0u?cjNPCvU2Om}n!sy_LPg3?I?;;|?Us;YU`Cmvui~>>2SNE!HUZ|I5Yw z(lZBQivLYISp<(y$amd(-tcri9%Q6*cn2UVIsH(eVdVDWLkW7>w!N8b3$>2zx?JQG z#o4Ep8#(OymaK|Z5RwnyA*Yt!G<3G(il{dO1vCBD62j10aK-H0NN%4#K{JapHn-Z| zrUa$eKG69}Tu)vqv;0Ko>r>Moz2wYjpcirscIORlTK@QxrbH=cas)K@zm0fzpB%*r z*5z!YgoX((T-#@a_@gYiugYe`XPXAgIgeZY5B=!(Vu`%>B1Z?*^Z9varVcy1ahkgJ8Sj#@A_vIUj$| ziRZY*3w5RL_dE=V%}?Bg&q%?A=r^3gF{9sCkZLe|r4*VpY?P#&+_wJoGH(teQJ%8h zX*DSU^@BODH1;}7&pn|cDIrfa2P@&=Y??<+h`3oyd=@PX_Jd@<`}yJ=OuNmHF0wgS zP@585q=tC(i`cy#AxnLB&4ZS66Rd6!%a9@GqMnd1>bnW{4X{$O8TZt*x~4it@c{RQ zZ}@KaEIn!^>3FV;GN|VKY3IBpK%4=nzH%`RF_Q2kY*3O0bvyRk^FO=`rodff+L1p_reIYU=$|X#K z>=e%@H}Sw{&}n>2Oeu)umjgDLnh7JFZo8<^2Rt+L#uRZDU^s+7VtUPHhhUe1Eav13 z`M2Ie!pn;f*ih3Rjjai;z@_j`m4zzi4L=(X4DNK*jWCv0)x4eg$5bSL=CwH4Ao4BM zd4Nb&yP~P`!}Kow1_}zyLVwnjA!7vjGZPofG4(Zebv+ASkNsvy%*p2XPha3F0`H%X z*Ci`h&W@911ltAzhlrUh(<(DME5mU{;}+Rr!M2|#_M9nf#QUcd2Hn#$Z=w=QHpxyq z2d0vqBV{fpikPF^ZzYDAdUi%{%776rQ=2SqR66`5Z1S$U(D2drgf2#KHbR4YVDaB( zm|V2kJFJmv7##^0fhHQ{f7+(kz(3X-lfesHgWaJYKYqYYLP7aJ*C;2 zT1>__Y$dp-Bo5n{4Wq{m71q&;j!FeI%c?V=l`ZCQ^* zmrnlUHR*9u8J3y`7da;}zlB$Kx^MQIxQ&uJ?~Ugxm4x&{0bNejrObRnOc$8I%u20(da;9DCzB~xNlvCGa~Gn*TXD|# zeL;zrvz~sTYbt$op3zIFppW(E-2Jig9R^%=@Z%%+HG+hTM^hO{m`OuS0sHNF3uTBX z2SaZ$>~xg3`Fr;mP%ygSb~DP#s(#T2&!Kf6Z*8r{WAN-;;6{zDbP#tK!E+ePjr_Dv zM=B~*zv7eAtrZ-X6xV5@A?5WPAW7D2Ei44w-Ps3mx~6x#X6sI1BnLDRQy34zvigRN z|2;`Ns?dh41R%J&R#$_KI8f`@_@MhuOE{|FW5JI2ehY2#i8brOj}elSK;xcV=`PC$ z(R+E;pULLgx5%Gu*$H5H@CSsbvX0QDbeil3U^Z$Xb2^KkJvo@&oI=6Un2ux#gI~J^ z3QWk$JsahpP7u!+xEW`*@ZmkgrU|dEvE1L*_aktGh~m>kMb+)zbMwXArh1}U9L*hZ`N`| z51TWUEbO<-Y8(Eq7l4`qVK8{EC$6x3eOh-om|-iJ_+Smq3K4ZMHJWT}Y4jT#d9pPRAX`a_bh6diFb8IopX?E z#lUAm0GZmUeFGmO@&c~(p>LBX&-4m#MF06vadKkqo-kt^3v8}<*5f`BBV7!=bEK)t z)7vIg1Y*-FBXZM2;{)pz73|L_SpevdkbNa$I0Kkjw3CXK_R9VRa^9Q7#dqTTcCQI# zQrgRr+!{!dJ6MN@z(zf)Vg1Y5(|bx9bFtwWxC_0@JX7|z@i_Wr7%@K!e>s29OD`fU z3#k{z>cA$Oe@`kA5MhJZWnlfx=a5h_ddgHB zIM6#TE{bX;mb!_-U1{SYG*-BWavy5^k)TY553A54L?cmds(nw?fkw_3?UqOH72zwH zp){SSy>z-bYmN$3)l7Gv;C12=g{_eC>aXxX>o}N<@x{0`K=cCagy6siNf+L$-)WVcMu^wYtBzS)a z<_P`-A81Zfr9*uCo?Qhm>3@lRUBd7lsv0xDDF*MzjbC#nOIv>%Vx3%#Fd)uV%TE=RCarIwq2Xf`*|t# zR(qoU{(fpv1I)L>_At`;fr~;gaZz!@r4?5#50p&MjnGLqhPbaqovu+%4-iH*Uba4W z@p5?9WzsfDLQU02qfX!-!0CTKh?9_6aulC-enYr(Se?JxIiXKR(v?kTY)6s_j1JsS zqO4Nlr)~}v-ec5vi5Sk6S^NBWbC}_I+7a)Y@;PtFJMvOS;~N#{y1TvQ|NPlr@k3D! zR9--m157{cAE~rUkgt?=87z65X8SE=r2iT^?tfRNlPEjs$1~ZmWmL^kPH#%$(6jN7 zqHufLZ$%ML4){yg_ouQRnTUR9Amc;^6cyXV_$YZ$_-Pma9j$Pt0YJSBYC|UeUss4_ zB#c+44zV-e4<7v_Wgi|2EZ+rbq0CUKGEMt?*w4-jvq4f%LYp!=Q@xYWR%SVInjjCq zTTKR8Tq_ZyD&&__Gy6@Qxz?9HEPF?+^o%8?s)xAMNWzxmQ1maYI$1DE|5urf5i671YW=33s@mSf)(; zlgn$8Of8ftw!h&w=`*@3$GniDgxZtp&7w1m5DfL4DEI>4O`Ce^6e zdLOfX1;fky$dPV<9;A0IRIL7CsqIZa=U+E6eg@5()Irl!_x48!|l zQxzwJ>e6e`vy(pTpfh{k6b6rru zJX9HzmBlz&a+|~w%8*}n2*aC(D!-7wr%PD6X);2J*rL3;NM4?9fT9%xXY?EEUkWNRr->6>k+`n_f_h)Kt>p1R|r4#0T>n-_XO;yqGw>Zr>+h0GxUyx6Yy z2ktY?j*~%DWZ_wy*y`2yE_{wtjyTR$gNOraf8oKLhYYvd+c~?Af2_tqY9!Zg3ssjd z2MurbN8)IJ?H{Vg1)Wm9`NvQ zA%um1mn4^kbPw1( z%y?APQGZwrk+_WNAQ~-c;IoOt^?XUy2A)dhUYzl;ac~@{Xlwv91QRy)jpC&PYGb2e zpR%5{E<1usmQLD74_>LJ6V1lObM9j1jH~`ra%!IhYwd=^T{vT_Bq<<$|LCj-m;FFpXWRrcoO=_A1!vZvP8RolCEw_ToxRL;PQN?5Nn35VvmfDDOA+EIWgTnetlO8 z#H+$@tB({aD8`z;e4ly*9E_urlZ}*R;}4~|$IjxJJdJ_rOT*EIL!B4ie>q9sxl2a% zWX#%5V9=>g-jd*v**2X~^1s}$K*=h9@bCjt?yR{BFDY$Sy0Kl#C*9=!Uhr z;AnxDC`Xq2y%NKBJfh|u0Jy~Hd#6=lZqg9>gsrtXW`wJnA@65056;wMLR;C#&$tNx z5C^IYa^oq*rFy|2CpN3wKp=UcV-#HVFXD>m6kf;)%8%L zC>0Wm6^@9-$j-o2=n(@-$aG%ZqljxfHyaQ6AKkrFLIFDCH9s%cH!9C975c>2#U8BF`& zT+N7DDbZzn+TmZFzu%j7+Uv27%Te0z`z$yNbTQc5<36LuxpPx#p6~7vHBpvH_6*$6 zZGbI@eOutQ5m$WhPSL!a!wvgqj3^<4AhRa}xjI$CkZic!?NjN&xw7CV=VSO7H!sPo zLv_)y$3y+;N&}O+OvO^!r4jyvWIWZN3W1r&()j3D=x8`qxyqdmW-Ii8m8gt!#U0An zg4c3))E{=cJIddI)^p$tbe zfL2~kX)f|v{y~VJ+PSD4nNR^ZdfnfVkGbNQczD8AAF(cFq6YYsP~LjObV{tQcXkU# z+mEO&%E|`DuYCJUex(?Sgzef1m1ss=xqe0+_64Y?Vw$Nufl5@9tEx4;kmt+&_hv`^ z@0(rG?Ebf5RUCFroRhs1OipgS3kiFCUWw9iZq5P4>!7>m3&q01Dde_w>Msp7clZdw z8%3fkO2kgU*wOcKDe_Z6AY$=PhAPP8Rfrmk^Um+%lvW$-j>dJV`gaAEVaI1TcVh!Q z&LGkV;3Q3g?cXBgbG*#Tr2z;wr8@(o&x4QR6FzK5aBRE=n$3Ib?{#46HovGFkq{E&kKV^j99jJQIkwOPW%!o z37JLCa9VWEVI@zFKu|f2Fh{_yU(7Od&`Uvc{d<-!T;0l#s;bc0#b>gfyU-ZAhrr!w_ zexD|MYs!}1u4DDxyPsT47)8+FTN;+%lA6&|^fx~T()gAzw%{MxmAAvRipBN`e*RFc z;gKy7niz9@9zFbhaArQwQzGd4>0oQ0Jb`a|^Md0NYnm==2yI=BDg-Ovtd zWu|*S4ke4bSE8IPbpf(ffIjq#?{4`w+>R80-z$hreTkzxVIM)7s0-7}tLNWIIGMN&#?*JIa{y;aUc&&rdNLCh3tzeENj0GoGN zPHZvDtiaIojLUxSl*b?6KJqSb0+zs?6f%u$rjS!R76M37DemtRIn`%hIF#%<^0ea9O_y#6O_0?F}GZs!Y2k6?jjnOEu#O-xJ_8B-yCagP2Gc)`uz_m!NopZtzO?Q(E-E#KMh&WqiV9QN_- zOZ(of+J2?9H`Wp*`fy!2Jau~a@Hp2G41VmCBIruCpViQs&)zE8X+u8a&UMiXwcU9 zK&J}(8A@fI(#v7bov3iS7`biHdwh%5m7Vl@_-Y=5u*vP{q1?J6)M-f7*u;QlxUe$J*nAxLn-FACARK9VRZetpKJ}r^HNRXuYzJy zuKmY-fks^0+6^%uYOu_x-dod@1kl?Z21->o6LZeO5YNrFT0)#JKl2ntCjD(6&J487+subbh$x&Ah3G|`=li_AGJc$vX;Y5;@@i_KNlB>Au3dwP@kPECd~@k!Lo zgjM%}8L)VjjWq!xVyzW)q$CI01O*l^Kw{6*jcw|95+p|6?K=Ql2_Gs|ql!N=Bh>O` z;3BZgq%^jm@{7y~=NpkVa}jGl`Ob{@U*HQUoGB!e7RBF0&FyZz^y{<3$)p^DZ!J(yq|vY-sAKPXcBc?ta99Z=fZ$2e)VG*^Dp{DurU|BkN1{157Hb?hF? z(rS4?&IZn-Y1m1~{8e^MxyI`V26(ELcND4o-NFo^j~l4(b1Sk;6VLUJ+K~&G4|=OQ z1W?+}l0W$4Fix5d`<(``y_LY>ZIkN*e*+3iRRk$6 zi+E-hbCSWDs7@FDs#radlZ!rS#xc5y&@V}XmEqgVz!W~Pnc09bBrRDJq4W=O(9k4F zGEnA5H^@GYew1W_qx{biWZ`Wd0$r!yGOreEY60_XO!VhX$^PchG1^~0(7hiiAgJjj zROe79Wo7H3{4;AvVsWPoZ8QOi<`UeNXb=hz%A+fSY3GM&k>aBwE+M=b=0Kq-DySqzp zcPF^JySux)dvKRP0>Rzg3GxNE;Lg9;=bWlr_k}8W;9;&ghjjPoQD0bl#td?QyS&qe zYyD0T6trB_bcN{Z4(i|ZBiz_%W8UuT?G38sPZv4iaD-z3R={ig8ClW?#jiTTaLU)u z*xV}pxHDFsu&q|bl~@q&x3vv8Vu?JB@=Qk-z$iU8`*flm2X)fd=gHq{&EAjz7u1y% z3FTt$r=%90r@r`bxeGt3UAttRbTjI{f%%odgW@tM#RzE;^bb%_Rn5&`GK(tx6rczT ziUpF6l((+s_%}Xgt!c3oH{G@-`w^rZD3&QVwSYWV9p_!4HiV%o0j*&U<$cKp)yqI0 zB$SQghenjXOs+5di_N-^}`FIF**v#uuc>Uq#w} zt#J@btHZ4#{V$rDUArt=t3)cmLAdK5nu%tF@z-o$xm1uG$rrGm+!u{?2@JeSzwFK? zh*yxM!SW9AJ*em5#*h>cKHFiS-^j6-iE1vqqQBCw8X4tuVrbLeu;!@X-VKrz<~&0y&2_DilNbU*du|IvbP zEp(elrP;C|^xvE}qU`MTs@I5}y%8}~5KJoO)!q@Vn!Bs9Q=s6vZ2T}+dDZ1|7qrvM z+M@YiHOV=Tj|vnMg9XK;f&Z`68d(d4r(q5M|K1OiE`g_eE+fFn-#vAvdmF45qMHC2 zfxL2Ut41QSnyB*FYPjRO&{Kh$W! zhmRWgwq;+Q_a3Ew&G2CjD;B65z1HG9&|j#0mSgKGtNp*3G_b^48-Azb1seAmH-Pg% z07RXKH&Rma+<%JV*Ifqol6=^)oJp@wCBf&Cb>ioleEX3kXt*5C_IkN}P!@re@hEYS zVx*`r6Nw`P#Ob&_D7)j4%Kqa>*aH@c1qBI#>nSMSCah9<Y-KBbL!$=rx04r!aGw1R(xBo#kr6a4Mitimm)AaQjaU`+RPmTA3A!+u_+kT z{JR=2=JyL`7tj-`S(86|8fh7R`p(O{ZIIQWS&$xkQbOjmx-4iI9`QBbfca|FP)&tonOzaBn!D`62KRNrtC zHNOlJku81SGgE$OL;`=^PY(RkiWma0nhC0OA z0gQ(fWtisFz11W?kqBc($s`GqvaJ1Ix9V@SD4YymR60n^BR+{(crj&k?UVla&%GuC^kN{#Fm2Ux1> zWPrs0tyzVS#D4mXaA@I>zFW=kcP0II@bX!}yBog2Z`JteYo@S}l%t?mH64EPIhqEK zT}dP0<4TkWTU*nPX+T}AExO(r4ozf6(NtC~5exqM#H#U|soH}O!W|QjTgd(qm^5T4 z5C2vs=88bXJm-v?nwDqyg8QXIm1r93pV`9e6+Qf|gT1}E^_OBvGEGpJLW$_g8ahf~ zq5XyUDH)bX^)CJQEG1l2R0rO$b~e(P7W5Nga>`2Y2kcV&yUuk_c}XT##;3%x9yzhP z$~QEQ1`sWD+;>P8VgGL~Vkpbv(sp=zorzMqz>bWWMXk`{V#y@l6SgHkmutqv;*l3f z=#_WDY$r&vWAdr!rly0$#0Sm+W9Y+{AIzX1Mo!+2Oq~P2s z1C>SGfCGH%zM*FqC9Q=Zj(f%7+Y@8C2PTCKx839Ri_5*Ew989@@e3hh7;z)Mn*y!& zn>D4By4d6@`>hv<-d+O4hixJPOIurfO%=EE9@C7aSi6an!`l(*=|<|xY^Q#Sho`4L zo=5Wsd4mBq#l_9=k;p6*S^9EUOSMhvdg^dZb7a`E%$Mvsm8JtbcJly0`TQTR(m#~P zo#KzHP(&E%V@m_LZ{)re_t<8`F4s!z>lyUEH(|S`=L+9!!e^4x@uvVVE46`y_czWI z9}cR@V_*&nN`JCB~vydp7O?#2sn2Kd)0mFz>lAK0akZg9CKyw89VZxb8W0NmARLH(L2#xiYXS z#gXx>^5ZODk-GBBGL=B#V&^c83ywB`*Nwm1y5^X~|511W6T&l9S$>n6GHf*dk0=`{ z5Se|_cU^x-Z~y*bQ3^g$2^vARprQ~mb|BO>O0GJ}O7!BrEJlvByaDM6DsTfCdMQEK znL}U)tNmxT#1yuaKn@DQp^36{+Mai!PIipZd`%8K#DwXb&#r}82$xjLT} zhy0b>_c!3>^nY3a+B6w*b2Ao0TUIgUxYX%T_y1n>*+4FAp8*l)q!P}6-KRilBKV7@Y=K9(iseMG{=#Wl3B7=CK) z=7P&_4pDkEieF_%17}R;(vMfYun^rP7oAaWJgmGBdi<3IqfY?sBWQ8x<~^aXe{F_8 zIua^H88i@t%;&b59>!s_)Ufe1`Ym#Nzw3SrPsmw4E|YlvzQ4z3cB+^(o)0w>ORb)DYeuX<1agSz7yqTZ63TGe4r|#9QRLyG^3t(RkhL`ImH9*u;M-&+O9|fw1C&}ou9f2lcy*Iw z`y#eph+t^jSqMO|Rh#C-cg;>qkeY|T*N0uNqPG<#kGyaE{)0o)OO@N$!e=+;J$>g@ z6ic*v(daB#FEY}lf6oC&2+@QE5G#9*5vONvJ#ebg{_E*eaert8#LCte61%5jk>n=u zTd|=9S*2B$aO8I{IvaI}e^|_*cLiCfDyxppSn)Z@5K7}j8PJo24TsQ^GJ|jia)ir@ z9Eq}#-y;YdZT@Ghn)>`kY?Djeazn!?*<7W&8hsL4L3o#1@-W*}tutrzfvwLW4|14T zRDf@^%~{V{E=f*UyD5lC6c~E?CJY8xSQ}Jz^CA7n>&mQfc37H#kXCA=TOy{mM6Ca* z?FO~;rjRIukBtmjW_5Urzn81zUVxi;-M6Btp~2$Z)PVRl zj7Vjw05jw(wref)Apn$jv46)`@tJRMA}9~~{sV26Mfw|>aCV+*7a?xz7mRWllH{@H z2UhAq)A&>3Ex&uc(6F$eH<)z;oDp)ZGDZs?g^J0o?~JM4F0oEV4+gj)bT2D0OF7hH$O@U}s1DPM*gW&)0-IE;9DhbAxA! ztr+`5SALj#mq0b^!vkOVReiNhn979|tU+P&f+I4CGnfpH@O)?n=X%-?fed2`3v^4;auaXGZQEfdilXFSNUl0g07*V2T9!q3|E1#@QOp70y2I~3Z-daTtf&{;(6M|u zK_b0)IYTXFDw+Xe=i*E@WuRjURTyWvQY15gl5T=(J@1(oe2+~`L|Ir`>bqrPi3Og* zQb^Me*1{t-l9zNX`YO_sa|h8-E$)e zq8srPytP!(h*6KEjt(#S86FA>N?=tLExq1P^hJ(@d+F~g*3sYAA!pHXNFj2c$yFmv zW3$Ev)|J22v(o`a)tz8SNCu4%ey1z~(zR_G@OsExz~E9=uJx?)2;V6^@Js@m8Mv`y z_@66fl0qA0%vwRmjt7>d1rA@ekZ8nLGD#lEN7Z+AwSL%dN_o(=Pyy!)B$}LiKybJ6 zf({GyU%Q}92n@CfbWh|yQY{+f=;jut{pwj@N-ORHR9InZk`vP3wM~YF+@h;=h%wij172l? z{iz`i*}F4HPMKcRsO59uTp-X$S_?eMyN>NS=1#7N-44q4N;`QGf$c(VfJ;d2VsNAY z|CFk;Te}Nq?g5bR^;vNSUO)ZS4Fi{jgZm6DEaBGl{05wJ5bOyUU|QUuN`=h`9DI)> zzhP&uc1LCIGP-n?cTCszwkbc@AICGC%8xs`+0lyol`Dt<1gNng0sf{xF`g_xOrKm{ zNqX^=Y*j9iBA(S znhTYt0O;CwX=e^5Cgj|^nBJ;v-#-P{q?~tVmaUta#~wugA5%f?Ls=L&*5s1oUMt?h z#aq@b_$X7;V$TU2`&8Yu(awi4HjBIBpHC95Zf+kQ6XXT2^Ks#zQm3lU`iBbf(Z%Aj z2%JDs7Fe5*U{6dWac8&OaEr$Ex;{8d2C2F_cw~!dWw9ba$o7$TFLkbf8~c)Ou7h3u z5xo5fu>m())svYr=0q=r9$UCnj^*A_b?~T(RFt}Ey%0PRwiUZhU`q1NexQ6vls?aM z8&SGSq EiAZ?2R`sI*BO+iJbgi zHo~#sq`V*KOunn^q8tKiPr_AzIivGggmjrJ9oo-xNyvcK`79Uy9aqWtijtaNA zJ#|Prcyn3ehnfKbioBo>aKC+(5?JTJm6KJ(BG-`Y|0k035o1?cpn-AO@8y!r3Lh79 z_NphDLYDb@jIu@_Yv`o7Sv}-mq8dR|BkeD4cI)h&(m!?g@;G%oSej5A54>RaA2GfFx{t?VL!u5TETpZC8|`QRB@Y*p zxle?w(D79K6f6;g_xqj;aY5|Uled_-xbW5R2w{C}Q2Il6 zpc;Wx$XjA{dVCpipm4xfcwO$VXwi!>76%zVO*}AZ)*|0=Q7}L(q`$Es^3b~KFnEV0 z#|}rxc5qG_6im$URvn1MmWqUwE>z3PdBZA=Par=T7F%4;*sp0nmV`(lbLk&EZS@&V z!b8<$=GtX+S&L3i!O4-N(_jek@BWM|DB)d)hgD~ukuFJ>gsB(QG5qou)0qg+X2F0 zgaZ!-D`x)jz#oJXz)c^9t=BzfG_he z?+~+f=V_?B67TKmP4xT_1XWGnz>GXS$gXrHvTzr2{P>(2VT9NrlO=h>70(46Tp*oe z5nWFRHr5l;_4OW{BcwMva4x@-(!k#<_hA%7s@ga$QIGK0NhbMVE2|ung^tJ-IQ*F( z@d08q+hntrRDJJ@xzIkfe-qCZ6Or&@7+bju1F5>|z3VnGI2;6Ets|`gSb5R@pOdOY z7big(PEZmdV62iEgyeLOW`}HCMeXg_!0_hjzVBQ~)TM#()i`l()pIrCX%u~$JZj@k zK-cVZzWq5hM0M?J8KFT;b~e+j(mM+L9Xlr{Dc~cmvbv=I8%z7pwRXaTly}5M&5y}; zvl)2ZX&9rYet(*jLJt2#H9HN#b!a=a1KR`q;fq|#ciZwj5Ta8>C}<+4&2+@-F!>4) z>;2+S{R%Mf>629eQjlLbsoL~P%i||XdSbO1Ek-gM8;|qi5*PBtFc8z^EFnEnOhg=r z4ETT(G)w@$2~8WL!K}r~`Q6F|f0?3~pD3k%^^bd53;wF_a9vu&~BvC=98Fe_z^G&SKQx`;G$k4F{jO42Rr8=#18N z9PwE-aLD1Dw(r!kX#y>P+qH#l-)N+yeVKth<`p;8ND%y~r~zCb6G3LV{Ckr#?%2w1 z+<&P-cLeT|cqpv%*ULsbkQ)dgD?&r_hy0b&ku(%toF%zbIGmeaD<@4DShBn@xo#5F z%GNx8=*;a1)+b@cNlFTP{GEt#f!>y1qCoT!qx11)r^unu^IvPUmIr%2lw-)c`ou@2B;KV79@_ z3nO0rZr{(gQPRC~o(=+e6)k&w$o`ypNK_@eTRrkcC8nU*f9wlWx=Bb{@L=lSAc4Q` zYw5}bjHp+d^1vIiGUZ|oMzDc^#kBhoW%0*RoS2;34zNu9WCLjTruAWct8erTz#Zjy zuN8VWm||nfom*|LCDovsj6{Ewjjcin$*uAK1OlS>E0fO-g3334Y~Y?T2YuuS*cL6{ zN+8DdY-1Si`_tt(tyZDT601pk+1-Z@Q+W|{xMYi;N=hT(m>BLK6wQ@y*b9PjcaatQ zA}ghyrwvgu6{XVb;G~K*E_y>hI;P~O*@2L#P&X-oYC=u zL3ey+#X1>LFaBaj%ZPcjL=Tgws06B#sF(E7r=g=eT5nVTX8bDyOR{e5F{|g73y@XO zWPv1+srfvpF%CRp1Q9Tq+A_5(`PJP|5*p=%!RE%K>Z8LYr2yBob>*K_1iZmHDzWYQo7m=<8Z|Gbl4$fG&&%BFEkC1d7*BDwy8!tTQ>&}{{gOXXuc8MF-D z=(2=7Dv&-H%U6c!%g4*5!ai`NCdz_srP0 zF!6a2frqX-NO)}mkB>aDx}-_3x$iu#T zX3PLW-my9_HoG@{B(7G<^l=TX@BPSf1)myHRtmlgkrtrGn2OjK zr2Y*7=j;f{$PR?dJ&|=~e*xg)24;b8TJ61(sFP7bMhAaF6CQd?tir?e2$cGi%4*Ol zXKODhwP-bOTl|Qet#`iN?%v!p z40467W$`!gKk2&pk$iKeRSr!8ZjnF=_U3!ouHd1^wH({^^Z4-f_zXvl;vMz$}WD1I@{=ac+fbv3_;r$lX zM2Q7&*6m&uM#btb;viV^=^z-C&CxoiWn}$R6#Xc7MAQSJSr`}c{vHehC(I0aXoc=Y zR#q+ur#{F*}3IF9JLi6V4Osey2&M1ra#F5gpEloZ#(lYdjQBTMP3QDCgs4|=*Wx`e_T5&*P8zE2;q1BJ+5Qz#Mbi~iq6ExY z^55jj5d&A#jnkFDc5MLU2$2P#*^P{0LUltAwa1O}y0j@}-*h=-^z>4Y+;wd#WaqdV zc)0h7aXiBq-afP(s~O?BW{qVgwHgxrmQlQHqpY+DUZ$e!tfJL{hy;B9dt>*>ppE{Q zCoW6GnO2)dX7i;&#aki`hryR&CW*sb8e4?CZxMR|Ut|3ORuS!fL4nZ-x8Ib}p(fjV z`?cdj7ThI`mgj(f2^)QA`vqI8jW7M`&^@Bg`gjwG7$IWqf9hE4Kt60W&Y{|WW|`)9h=_fuZ3AQJO{x7NY@5^DreE-WPx>IA57GJ)6MnxFc2Lp0n9BJrmQkL6 ze{wB!w`tmu_Cj5^5hTc8uY;GDSp6mH3u{(Pg{;rI@u4fPYSyCPu1#2C^${4XQu~`N zzRkMUC*C+DrU${0(fQW~^LKvgx4KV%_@6kkV{*24527iib)z40QZyw7q*{O+Nf96j zKUfY9znwaC%fbcaNJ6H8g@MJkz=~`iKcGH53<3hokO~mkv1M-`H$D<$B(2cCU#2&9 z^^#;v_Y4>8rG`Ry3Z!T|s@?)Kf`ZiI^)YX|SB%Z*k6I?7J0z-VDfKRiKw&y!t8Z6@ z8grUTQ7-{Rrk|6uQw9TjM}|lp5Z_CwU0dA?J1XG1pY|c;q7etzD?Nf`gwCh@v6733 z5q~9B5l-<}%$}zZmmWv`GO#fFG_S!2U%>2QN>7JDTxu;>yvbF*R;OSaz>LJj*EMWh zNP5vT43q!+Q{7fj&0D?|%LESNBP3OpWbj0Ag5+>QK+jkjU2mPomaR&li~|5$A!+;| z5`P`V>Ni9|!6UuPXs~jm%drQG3%)-3sP|@- z1M>xDoX`d~$s(2f-e zGIoYMsoX4>O5e+yF#eM^VvFY=wzl;n#GzAh7Wvq{F6Kf<$FaHhzX$Wn+YGl%eh}ZD z8|>!%v6txWM&5mz&NupA5Mswe<@_lM!c<|GYOrY%dUj*ORzzB2gDzX-@VIaWytu@C zg}>`(2`mv`cJR9XSkT;R|M5RWjPfMF{FLQOkXjZ($7dgE^Fs| z5$XxOq5z|?>{y7 zUj8QQ7B*dpyL3$$JP)a!nM+ULsbnJc9b?U{-$bVRYwGDWwB}~~c%ZEnzzTl0?%S!+ z9818&#B{iYX)yj%f#5nLlPKSOIag5NmLKVN!;gc^NZAsn)uHNb0s(KzO8yab2TAYh zoYtWbj*89;1Tsu5(Yi0S16+*OeWV&)Am@>%&x$&q!KA%_Z8^hr)ma|A^`{`gX; z?ostgKy+)+0b_0Hbgi8w1y-yZUG>2@<$3C31L^ih?bQ(tO+&a^SxwXc`|~)Bw}X($ z4$s0qdSg#mPWJ<4S!Fxi1(O#_(KTAb%PW=Be#+*`?IE62z~MXd^N;1#t_;^tkDjJP zfhQ8OwcH9L4Fx|d4 zE)NPAHnuY-#7S#Jd}Gt&;c7>=v%?{s%x(6YV~G6FPU^~qF1N>vm|ZM4-iS9p-3P*> zUnx$rXuBUEK$x9jHwy>b7hfX?sutTsN!5iY)k&XkWGkvx5kr(CT0+aW&oRUEp6x|! zL9};lnM-lHY2$uk6`E;P2sl*9T7}I9AnOG=DbuzL|IV)$4%`LGi_IH6$dki!f(D$K zf02(eUn!_QRl0#_5fy@_?Ba|QO26eHrS|Xe%I8+Hl#0jo^@8GrfBm&4NeNA?&LP0Z zw$J&$j-2|VBOg<^y8fu1yn)-~^aL!yZsH*_GgevxSC*z!AuFZzGV*+)75C2-2e=JS zBP2Q#DZlGw$2%^?Fsjn3HubPn9-4mpeJkmH52l}3$KN?OQo1mLtKhYC-eNKhrot3k zuw87%37Jc)M3AhQuB7js4hUbMKic}dJ=CrTq*=#MwK$lVaJe1RaluSZzW>t#s9`=Y zr2XA~<~r}0Fzc2CP1qEw|0w$Y@VPHp&b%yGB21B!Ui@Y5tCE*F6R?!=7nLl55N2AiqUdr=k+ukN-!%I7vOz%GO!%i z2Ac#nl{g9&u!+Lz_CEXUbe1N$vrQ~4Jo-Gs;0XJpIqtsG-y|7&j3IOGs%q0W|08(C1@iw1Juc|^ zrRe&LE&qhEAkcu6Hz|tlkZ{t`Ke`HnpvUA1iGRGSy7HwNA9BzR3{WCkA-X!+=;0{5 zJd3OSB{WP;q=A)f++I4+a)(rwIUZ|jyllhzSML_Hjh7y~^iyTxebE2~g#+(>tpWXL znST}SrooJ5Q%b!fh_OFREeJuWQg)S-1%Kd83ueWK^2|R-cn}vi86zKHOdvjZxeLw z<_ynMO-EAi%#cu%KpV4gsc)JHStSV90o|ULIcy_jtpvcV0uN+Ic{@7wZEGd*wLyoj zJw^vDcHCw5Ryn#uq7BYb|BVEhwu`Lh%wP$TU;=+!oTi>0V&CM||27?;|N9av;{Hhg z^CePA-+CaB4OQ=Y6kmSv-WJY%DN8{ov488A$0JzMI|5K>1|B~?i}Y{Cc%3bvQk z1iiO}6?;L&sI^-3p2ev@oGNA*tzLK#TO9nEUEGS4J%9TO@0y5Xad+=fOndRE&U;(b zCtO^32WQFPoEmBC0lm977z@9^GNTmptA|M@UQS!IJ{5=-hkoF*4sxVBk($yAn67Rx zD#$^BkHqwt>Rn-gBje17GH-!;eOGPE=CXhft0T<8=$~#1&AwyX2gtDab!O`g`*|YM zZ`ZkcWD#6OoqKwAP1EN(;WkFMY&!N}W3zF>KvzXm5G=7em18bnr*DK-O=Q92jN*gRmYtT^0|&W$z|%l|i)B<}v|8nLuWhXeKBp-CI1w61 zK;aVP=3T!BIkimHR=n})ZkQ#~O`a@N((k{4eDBm2J+0V97;|W}liOO+U}^p((hjhv zBxwg&h{A6v{DMy@R~(#t_w%2b2bt!Z-k@d0WZI)N?%|J%6@I~uky4L?yJ6?2^tQ|* zhG6jj^W1H*fO0kdFg?z-^K>iNGuWR&u(YZjp~yu)xQHA8enGr0FYl9B#i(DLGh$y# zo8>k4`B;sGLa4~FuYfH#o+{;^&Ksc4DM(FMI`Xco;KJO^aChG(eXfV%~rp>O*TQ)V3E{q z)D#;*BJ}68XkEkR!qk2g)T;7krD)vuEm9S?=_j>xLixI9lAHk?oV2}2+FI{m7n#2udlENtv@k3)g zh_h*@Ny*=g$@QMt2+S^g5`<_y20C-zOf#SW%p!3F9n+7GTV;`v#_o7S(76>2Dg>&L z1mgLt(oy7}QrCgOY&2(YGS#lG-Nfuma{M&owOIL>){^<@kwxhVixLkTyUC%^+`$R5 zK3r#Y%UMHzQ(W@7f7f1?Cr9@Yy0yC5lfJHu4pzNSmMp1(|2j`#D& zh?e7YK?A*D=d3tvSGvHGAv@`|w6V?8^Z1kcZbA@5KOTUh^C6d9Bgy3I8aq%NeFb2jklvmbgb%I?QCMoR zlEg?!lX?()*D4BW+1+h-BLA#{hA-M+;~KNnd4Ar272@@-Rh^!#e{^xfvbCGzCPJ-t z;t4lj{#nROwG*)(JO-0NMD|1`G&Hi3xQ$e!(iQaQ4?|z827X9MiPdyvO^78G;^b=c@9m`vC=Xh{xF^^loGKh&nU1UGOelo zPF&oms`>E`+*P*ajP)?2bJ~)~4Qk#jOs`>Jj@*zxOu^Iei|-2!CDeOW-HEnPkFFq9%e6+^ykkop2<4oNHY`a= z2Up1^Jykb$9wo? zQob|m0fsi@w5*H_0B*zhlJ(e1SFxV-KAVSMY2AOzmdUs|vY5Fd2Txg`ohUfeqNJLo z6fmiBG*SZ+B%29%6N-o*Ir(lID?y!RtXo6evOTiX0JKbN-x(+1Wy921o`PnI;F`MG zLl8+^(B26Ww`TifWNJt>)?F#le>`K8XpG($v;Fv-=goiJ$vw9b`@XPPRMCt!EuS+4 zjuXJdH2he{_~L!6#+RNEp?7pdI!e9L*xrWuF=NR@fpZKwm~imX-Nt>?;`VL9Oramg zsQ@{$;qrWU)^0J6j+xr9ly8s{ay^)*>1#sl?=_9i_6{}{tkilW^p{f2SOluDWEHri z<`-52F+bEAs4A4F|FG^$E$%E)oJdiY#>2%(EzVaPSSX^kg2kW+97x2d+Nj$_!X$*r zF>;C!oVRM@);E`7LJPi;rEfiQp=yV)YBuZEP#1(kqVI^u~ zGLn{mPvGGkTkDyE^Ku;}6_DP(;KjTzE$&##!naXT6p5Af>HPic$-iYvC~N0qMnOo; zGz_%VS(Q}(OBjkMe;{b7d7y({pfQa^FQlqYO%tZ+U#^)awn}=;P|Gt6lw%CicNh>f zpqB7S3H()1K#424NNM;UudVBv1}yA&m6&8IX{pS{@lxTG`g3P^#nay2UMMh!Gh6LX z;;m#DJSQ-CqCs^9%wf{Yc}LS*M0Aws}BSR?{BR4tFkg|f<& zt;XEw2GLZilojA@(IBD1?I!!#m4tV!xVfdUk4ha<%-%4fqN4Z+d^20l9k8EjMn*@2 z6y7@?%=L*c@X3sWhZ&puFkz{;RWuioLX^M$hnU#L7WOzezC1VqbVZSR2tbQ5a)Ye5 zl11s8PryD^iwtP_gzCB_Aci=@ya_;@;XLZQg3?56n1!mBO}r$a+NdatwM%;Ss1%K- zb9v|?_R{85@U8773RR-YQm9I_ss|@~dp%2P5UAGIosK}G53GzxfN0CS03%gv;D65* z1>-{{;H2@$^HCa*LLP<}%vo_cY{i-(KN$c0X=&R|0^t&H6fwvJwbO+NY3YD@xvnwU zMM3XnPXE>|G%$TFkr+dit0xIHDkG(?fsAA7M@Yi;zq7)v-`2zJ2T87YxUV_S71n*soi@L*-NcYSHiS5~wbYwJh zqNL>bCE7o+DwU#V{g7H{S<7&H$v?3=g*Yj8_&x(QcqVEW7lZr@)rhHUS5Ahqrb~&dkJxU==cDggi0s-hskla?L*uAA%{t}kQZ9sb=R2_n9*bCFz1ICRy6|N z1-M(s>o4W@9%SlfAf@g%+9VX-Rw#))FfsBh%ecfUEy?D>8&}jUuQp8e9T1sL7S-o6 ziLd1wb~-3~RH(5~5Oho=H`b;gS1B`-y)+{`MVLw%HMG9QJG%pcZs?Px+C9qw<<3Ib z#ZIGssLv6m(dLUMi-klwiPa_TrV>Ile1D?v?sPqUrZGs=pLJwCP(r41z`0=!=mRBv ziHhS{V?SmI`~;*iOFd`d;%_Iksi z(ksP-y!GulvoClBus#m++kYhi&GfLfD&63Iyx74^g+_XcSBD7Clr$+_U`SY`?L%{Zm46|ZWDW)G@R+DMvN^Vy^hb`8j zWd?vm?-S+(HnQUUZ7`JhV24tBq%1m6y6!U&-o?L?XtZWSi9vOUQnsG6v7Ev;u@?3g zn)Je#%zmm|z$jPPiYW!vy2}@2H-Q1I;)f+trW1V@sg7tJE+hn|SauUQr3%|2;);eL zL5H{dU(|h)q?B~d;t}<{-kxBrRAu4sd5Zf7dnwlk|GczullkQWB7Rp__lsIgvx1Kn zn3yCju0^9zQEi}LuaJ3tlZ7Wt9>wNN3&z^GHzw7K^R4{=x|KenK@si9e^mly3;0b~ zUNFvh2Gj6gJlcQ9YiyeD(r~4$ur*%hzRkcYAs@Vd5q8p+Rf~q3(P*Ad8oXp#)c9re znLErQni5_%h$Hi}qas;j`+vVP)d0yUPcLu)EQ$se&0f(Pc+z3B<%{^-h&%JP=GM}2 zO)SYNDX0PSbeAxZZAZGl){cwpt3~&_^9TC=_)h$cG?_Qkm~( z71&__a-z5sEx)g2kJp?(;bv|n1bCb0Wot+^OhhRYiX=l(ArG{R&Uul;`k-aXm|(K9 z3+~a4jSGZt9|L+V=8W6h#qQ{IZEQFd@;b2rzjJ=Ye@EUaf*{0qI=NM_uADX}a59Z? zHn1)*Ru3o2^l7s1)0l9!0sqkSTkpL*4qay;F0sj-(_|#qoMmUqmYcW3<`oI?JoZ7` zKLbC#bX34RGyWXe)qfS>!s^cC!;z(wH!dSXhWfl6!}Qy*7yjIb-&Mx z?U@ig(0)MKENX$)J)@uF@&&e<1Ynly5KXEZ_p|=Jobfyi+Vx6lA3}6Z1^!aG+uKZm z*Yc8n`-d5-;4-MD7y$Ih8f;9Kh}1T9;pO!z=$`=`!rj%C_%$R#+&o_`y2wtI#7to< zb2Aay489r3LS(-adRQn5ge7rYy)Z>QR5#c_FYF>`#+kl zAyQl5gA`0LNDJ0EsOR;8BInkB3j1etP3n00eUGx-{0;8>}8vtNhg z%_vN9y>A;$+9|l(sn&xh1dcq|HQJlmN)kG?zlGnbt84ypXSnZbuz~ip_>U%4{V4KU z2>u@Q1K}M(8_XL{l8XTt)7AXN@oE0Rb9e6`Mm!(q*Si}bba%~Q)$Qzqy$=O$HAlO{ zJOW?q?q|l|G$<5Q>y1~Hmf`k!yE_hS$!UpIa8$6V3dR9(i$>*Iu;MN?ztl^ub^8!T z@P{*&Ll|;MDt_6-k5K(d2lzSkKf#11vd zf&A}r_qT5A4o5pinMxpT{>+Ls;UajaWR<4?|CUxSWutI9z1q_BNhvUewLoRQ>Ep2k zQ;E(&M}1|jE+PjbcT~qn97Tcdu2O5ev3)pH<6Orf>O7D z9i!Wl@O`l{mnB7xJwE2Ryu3X0A_DBjVzaze+;Po#dA@!vv6R3l4xpL>|B}rig)A4^ zX9n)SRRM`FkYR_~p?&Gg*?Gq!QZh?S$F12CXWd0;{WY;VRE|H%2@WqNh6Foq1%+VJ zm!7`0Z%RSe>4sW?Q5Oa-N$FCA8CxiGS@rA;0O;aqRKGX8?)=6gyG7dD`yflv#6MIS z)L#deM?WZ{Y;aJ9FxNPMo3{H@mqL%qzAq-@o9mP+D+d z|64ytJ1Sg;nenhn$`$xm0hWr`n+Onij)&K-s_OHhyMn$jSXfx$>a|Y4iJbpV!F-^6$bdg(?w2E_MMQ>?3_qg#?M1B*4q8fB{GS|8-i$iEk;{p7|| z(bF6H>#OX95$}&dzUm&7Z}p8EohN|+#BBxeCa+v}Ot~_nYG&N>EN1~1b!tmPZhWV! zmZ}GyBDSlk!G_mPM*+VN)LD%<8@TY=$dnkn$$J!! zQ$#JZdXZl!H0gR5-%hE{v#q`b0^Hs@O)jUnQhYwUd5bYKdRQ{eW)AdgQx=_8e!1$p zT>2-sT|&`C0$|UTX!&#!8Yl6<;|?9K*L_u>#HAad#0Oxf1BpG?XPGv4!QZ7gM2r5y zyQ>c<9AH#>G8#SC=ycdC2YKJ2@l3=FiON8;|WJITo#iMm{w(h@_mc}-zhf3}2zU5~1+ z=9yS?N9ZIg+c+eM{#d14gTXjdP1+sIbFMAcz+D0AUP>Q`Tt<01<)!`Ljy&UL8S3ATA|*+`sF`DUirL z215{if3N*}iR0vCWW*)CjNu&;Vs~LEl$MlqK!_*n^taJJh9Ktl8$1Y44=~GkkOgUN zh-P40&or)#H-^u6A)St|IH{0-E?z;=(&8IS!`$^uz#Hx?@2#RBqKUzs2;S?18T@ZU z@0I&zIH<5@m7hWQ0aIrK_cb1aG8WRvNZuX2;?L%v`XSMe`@Tm|&c&9p;>D#V^Dd|p z)ocUs1-B*ckFDMc(l{A3w?TK_=1BEs9~Og&-<`%c^u;5T%*-fOW8XUyd+#V{H`Nk} zU!Z2K{3S->o7w1|txCnTeIQX6WLZ|~vgC-LUhG7;{L z`33g$)Gt0i-4>X224}10NKiXD#^#hBQVismpI@~%S!E_AEvp*cl3I?W22B?!b7*{0 zT$PH`{kV?#<7af&vm`4X(m&qY%V@KL>yFJNJnsONR$N(Pfh2ggVsCGr;HTLG(r6?$ z@$ynP{={th4pe01`x^j9@5trCV+B?;?l9_rrDU`7FbjKQDN9J2X4S)+K52RJUA0W$ zAw@Vkbx!VD3aA*3u~*T?jtvin-L;NL|E*LZf!?!gLE0Y&q@QpMBFfBksiLol494za zQ{*I*QOJAE=i|6vCud9gw+JCsL~6uTe}Z|EYF+KuzMlD_WW z5ZwBFkwEz}qY*Z(myI~s7+qXa67=H-1>!3&)jBlKy5sNplrAe9cG~Gq9~*WA_jbsF zNZi7)wr|ACD$WoE;lh0*83F#scJ#6z!<%YxF6eN@=`mBD7JLp=lck+Lf@6(sEqUsx z2j-%=PLC|#s|5zj-5}2cj0J>c>*ixZ=!gLmZb-=MzA8wF4103#f|8=Csm zg0S+{Xtb2#6I|X~jy~4QxgP zFnp&gS+3S6`9lk_F$6MSHCF{UQT%WtupJ9$tLD&#!{Bh+%j+lO&R{WZ;S=oMSZ;M0 zVvJ;ZFsp;P zBx_>z+?nud*xG(#i)0)pw?@+>4fkCFmQH{n%&EUAfsj`Tl(IkVZ7FFxQeK=4C5j5K zEEBmd596tcvgpV1EsHG$C_^jULdD3SE(^~ZD5(#K*LvVI97>|5;3awwCr%s7zR5%H ze0r@ch42b9ScpT*xkJMxDoG_}Ezrdahp?ChdCa(a->U{(dbw}ApRVxjmQ3Q*VK~!x z?D$@As=c0#58U6QraJX@kBE2Y%x`WidzkfMqjtQXNt_jHe;;5&GZYg5uIYlkyWWbe z_8Bveya;uPCB(~d$D+zjCVw}LC%B0?RO2MNi72{t!)2jRglB1<-?A5c*wP5g#x8dz)9>HcTmu%Ta43z@(3g}Ly5nxj^C^0U zC>}fsMUsw=tcd%Hx2te(ffmP}>C#2EA(O@8q3wuKta%N3(2XmR(X-8Q!cuFCSnAvz zC*^RBvQf5FJBKSJbg^_NKiC!v9|vxi)={0gwv@AuTV)nanhkrQ2oTIw79%>XL&eBV zg_9jib|TrXI>1{JVgnz9ggncO;e-&NPvN*WZHG1J1@=$JcJnr%Er!nj6*?OrUO)`~ zXM{~4vjz;aO5kDQpmns`2xfp^tc9_PNXXKh+XDcuhlE0}-EUuFdfp1x9A|BId?RRi zd*TL~L;-3Vfomw=v6!>>WrQd9LaWJpR1*Lml9n;wRSp34fXqcl^=$E4aETRGc%Xo3 z|BnlR7X4F|i_GQ_Kq`cN(BPI(u(Yv&dQg~xl5)2qbt$y8k)-{p&v6O$OK0=T?Xr^& z2d*;>Px2Sh!fY}+?d{|G46-;nG><>stou+JmI0%3DiBtTqPA{A0uW|s>5uZRZk$yC zKH=1){LW#kOPFd&YHxqOZDo)HbnVnPFhl*8Xk}>HK-tdPzQSL5&}!#F)%bZKj2YZ| z!W5US`+-L5@Fg?QhKDW#!#)@vIfO03XXei&06M@(rbpn*)52s~?DtFXVSrojjq*kI ztQrg!nrJt_Js23VaeHrc|4@qV8ugOx@}YGY>v~a|I@qhcVMm(^Q>+_B>C#NX>YOgV(mgmc1M%J51TK7Qia=xVtbJXsyWO1>|{<$H!YHU?m-61jRq#~z{?94h}4`4@p^(I;qx~lZ}gh7-9{<9|(0?WCP zX5cQb)&ep(I2e!IdoZ4=_@{R%ETZk@$-c>z1azZ5Bk^FFU7$qXaazq?U46X~(!VA* z@@=82&7Xhkx&m0`L+~E8a4)3V@~{3lUzMS88t9{sK9sJEr|ESSs5Qb{*vk+RRkl`R z9O>&U@sb0Mgz+ZXrLl!Oc4XYGn?6=4M$9 zE^>Zy^mzaCqHB%D27zp1`OYYZb|kTC`one8Hfm0sTwN~HH`r{}D`yh+=aKarY6jv1 zYg+M{yyZ;}D)GS6R(ZDx^hNj+XJEVfkk705JcgPQP)}M>KV@t5m0LN83AmSnO zG&1dDh-E%p@iRp1fPs3K^SE=7gJI!`+WwBpY^QV$&VIT_viy`m0Obqj!AK7lECmir7VFj*bG`Z{2P{9W>d}BB+qEQPwV2(v+d#?QIT;E6*O^|0RdtMn*r?U zvNA)OBj+{NZ$5BQ`Ut3Rv=X{>YydVCA7{O;mC%gawTOy;8(;q=7c7Zp@XwLAFSU0? zdKAwupo|j(=qK^XiIs}lBLWf(a^8>mFV*}|xyZ1$<6>f4%jXwq<3mzd&Lp8qjUkGX zJFye7MO7|)O2F`j-0EtKETbbdjHdWjrK^26VphD`2qee)MaM+Pa@U^*%-oqb7kb_7 zpK0%leDt52%GF`_kyFG%&36w>5NKWNfw)sz8g?q+Cd7h6*$vT* zJmG{xiIYH8Cl0kW=W&pwI}ut`X3llJ!kZS1kB{$Mu?=N1QjzD&49ce$E{v3yI142- z+5E@jcQd%}EWx8H`FQenHiYqlxy;s>94`<;mG;fj@Im#Cw@|y2cML2nk;L=M{UN`^ zSHC^SobJfX!rwZaku;VD8O?uNP;m)>7u^?8b%X6@A`y0{idTO%oouMl|N8BluersV z98S&o`S&jk4cd5L!k^g=54kDW*y5nuXdS(G7C!mJmYBmVom7}!?y&|`+|Y1Y!0l+x zh?JjKSzmhXsPH0I-bNZkr^A04Sur*vw>x`{$8?O9C3V9gOq4sbHl?D%GFhEl;N3Xz zHPjz=EU79lUrdgw}%o>I70TaQjHK=w~1WafChw0z{oDT&*U) zwwFJ$sr7ay>J7(&(K;TZ`0fb~@FhbI-pjKQ%IV-GU9XI&Pvd5uF#|%$&|kz*O4M3z zL1kpitWlI2Msm$sL#7D0FOP%2r(fOTjHOJyn8me*u*zd)6c3(uQa0xr@PU7DNJtWf zhQ!pPjkvGVIPCng#=$b$`hs8SJaaWESYI(*ITO1BmdJUV(qfxKTW3G=i(UZ@(jgjO z^R^63BIDi6lGdk5F@+Y9PCr@T)m->c%?AhzZ{1RwEPz`d3f)H!NML}T)s-pYH zw8!%eH5CY)D2BoyM%2VP8n9Nu>GjzwzpyZ`)#XFX8MK8Pnp@~@t^%6;fQCL6_k*je zST0&hj|y1t@YQ>3P6DViPE}uT9>0`#FtrY1tmb!&#==o!vE||4o zs(IMZW#4TnB(~`t7ngK~AR{v_NCW|Kkm>Mj{}agi7=SMWfjQE$>sBl1M|npMP=2n% z8p**r&M=;%U>|%;F%~OD2sU9K*QYGho`AR}V2a`w#F&nUsm-e5mzgi<{Z~tV5>51N zBDsY8b1ZB1e3`jLNRf%-oeRl^E-q|!IZR8>0gX+Yx_O>Z5A$GAj9_dIPMIXv3qkPs z(RKsfWGH{qy)MW4%^l7#lkqB;orC@Lfw$1mTUZXoKO*rcn_ItLltrZC#EeG}3$AJ> zB-f@~>S7NyupHe#ghNYvcVq8Fs=P4Y@)ioCN&1IhksaI*)nRtB2>z)PAGTO0nrKx3 z9sZu#&E|Ef_PfqfoZc$}n)!QX<|5ah%xU_Ee#BrLx zt*2j;$|I?F7!JbrF)%P3fqA7+&=umIJxkeP++sApML+F}Y2*}*w&B)AEJOqQ)TzG= z)zebsx1Kmz3apSgyNO;aJju1&=`O%s=Z>dBTBNbU!O*rOYL$HgxNB8aRjJ(e1a;h; zslUP=j3&-iUA=7(-z4GvmlsA(I+R2t;%pXRN9Av zZ1Xc5oya~oH~><1(d|-j6@MuTR~zJO0^+TNZPI#^c)qNi@j(H2yr|g5)Yzg{{hn_w zj5;FtXaK}>9m>aV*LR+c@nDg-CsuJ}7KBtX66#CU9;MU!1hm=9LDO7~=kS%GbMJ*^ zaiO_$ZKlNJ?sq&n-d;;PPGP(Ms`w9bONu`y@M_K{)XqE*R0OX88d(I>(CZi-Nw>$Q z;zx^1mw(?t3>w2v!I~f`++@BTK1|9D%HKsX726%?Sn{zxZX(?K-+J> zwn&+ZJ_xrtMhuCDYjR=i_>?xf_htOagu zncd&tvvS&YY^}2aEw83%1wD%lu}LWl%Rt4`sJHJEi1PgMYboBz%4J$qL%YJXc&4vU z3fPq-LccyWd?$vOS)TM@2+Wf}Ub^eT;lg*mF@U`4+drxhrDCS3Q4B(|1xOK+ArEmM zV`ciY2Wci{P!cUWf@EY*5qM?n5h1VzvZMLjWEo9Fvp2CqkGY@o$3Ge2SPm!k{xgX| zf7{T-=VN33`Jyn%AggRYoHK1Ai5}$0V}kLVY4Q2V-nIyuLh3G4qE${6un?j*rvI_* zOuW;N&Iu>^FxA{_Hn3>%-ns2$46ZX>$t>9-}!BO`(E_o zuAGl^4^m51oZdMo*jXwMhBG1JhT@FK20#mkyFt(%O@m+%qQD8%1xOyVagZj_kpR#cQYLk0j{qJUE`h5;>$(ck-* zCJz}or{#pqY;HO64xkx0-mPJ(3Ikw?1P>PXWkwbyJHU`3UYA{@LdG@{vO(=7PAW3Z zlBkHONw4NgEYfuZdYXX&1FPvTnpzIhUW*~AY#(5hvV}&625k)sM$v_WO~WaQTL(Ko@228E{}JqCkj^NP#CTV0i&3?-InH7_c3&`j^0P zGl=j&x^jrWA}TRVZzf=wPFIOp;og>e!AI5!A*Iz&3`B|*9R^RDNQfQoKUn}wQl^Dl zK>-(i{M8PC;uD!>-xo@=;Cf22IA}5fScHOSbyjh5E>jBqBNsBh`Z)Y5et!OHJM^NR z=2YXbS}B>?D5f&+78NPyRo~-D?VM#oGA<_hP=k}!^u91bl`;}De+)xI!x7r4!07XH zREZT4_ z(yaLnLc&67Rg!8yEUA~oHV&z@wSpPe(kmDeN45xCkY6MhF$90T2tKWb!fgYVz$ZE4SRlR zDf;9lJYeBocYo5t+@yuQv zm4BNdjo%vh1Gj&Z&>=Nhg4QAr_2J=-mYzYiWN72`7VR5}@VAW(6CALN<7V_%@Zp8y z9S>1}Yogj8jH_1SoT|ljZHfn2Tna2XV^uF)XbXA z(39S7OG?Q%tmJ@38hwzW0ESOcB}v8(5Czb?IhjyVAG8^p4kt6gp`yaRn6}<7**g7Z zN*^tD_$4mi$IWQa5StQ*Z23h=TdsBUt=8t7>kj z7SpaTT6YVJH4EMTKn;u3mE5)qh?{2+6a;elL0nsc|6=@9dXaYsNAnd{JW}s?#=>kP zSjJlFAVuZXS^uQ-0oCe^T{o`Z!M+^q*{@)TYyPo<@LX`-Jv9B%5ymirFC+Zv&;>=2 zK#irg7=aJ=mdv^IQ;1$ml+`_)!q*HAU zPhXaG_*r4L@)+?;2!yKWDaBU>;!=Wm44(_Y?#4sqh^SZWI^*b)v? za0R0D;+*gAY z4AMAc5w!@G^X|0seP&xMPThQZ$GGS0b5MXiC6m`HgGhgWiQ?$lodAwiU@2Blo#1_y7r zSR;dA6#FKr5xZARrv5}PAqpF!3R}{%bHlDOjX+FWGAWXKj^U>G|J8?p89xXxj1dZi z)&v>GH0zNef6{)o&q#g?^V^%OY=@cV$rqicBRx9xOMU3XxaEId$b>k7o>F*V+0` z8aATn#oluzB%Wcjob^AiFSa8u%P+@w*HkYved80pbwmiL+7cBlQ19Y`WE2$f*yC$q zOXPI%{Ph0R_fKAYgaHQY#=e%3kZPw-gCPl%X?~!9Z9Ax-UkuMASq*;E_kkF#wQ{=8 z=x3v2g|A`Og|*^opKP_+KX7&8#`>1!82e0wlqV9Fa;pz4wfAwI@3tcJK!~kSbQ!j{ z1V_4TpRgfhV@fQauVNtP%Xs6SNr%a&7O<>wXvD64A=iEZIIFJ`XwMaJ*wH2SL;yg{ zKuk9(qVK>Vw>}mkS|)w{L)J0c5tfo#Fvj3ckm%+6gz8LKgOye19(lm+(^pi)P4qqF z7$}nDU+CvFRO0W{58frk{9j#V+ZdGpy!rHKgV>>t&=Lr)PZoA-E%8kX3wTNEMA9FW;NxE%AvqOKcrRw$NBlRH_M4%4 zsKx@jB#+BX%bs<^Ie;BBSQhRRdZ76VheOeAJmlt&2$Qh{nwWWoN+B9^?PbBy|+ZXVjH*p5l-l}Zu6tPU`5d5pOo+BX?PeVd}DQgdI)@P zX0=@i8y6JF~#1Y78oP}1(_cP<|ZE)I*FQ^8F!FGC)07qX{ zlL0h5g`T0V8@z%wAS%_+h4hX!Kv|_ybe`G7bc8Wuw|Yi)Ikz)+$PRBaaGU2;;&L5V zWWGdv&hRPrcFnAz7wsF)#7s%v{kLF>VIkrbm^CkPGdT2lBU&t_D;D&GnJi-#{o{c@!C7b8 z=hxozrD#ojqgU3Np}x???4Y0*AlVDE_j1kfjWz>lZJMXhtp!nUIJeaH_v zvy@%|`GM+|s0mTX$Z6uBiIu}kklKr8tL!WwC{0$mdwrgW!^WN%CIsan=>{+zbjxHm z{fxZfP3g!VW(afbtBHZN-X&D{BhzBLg@F>L2x@9t{aIedW}T;HY5mZ(KX^{XW*{$) z-)aJU(3sU%H}H0X@yAC(>trFjyQ7ZPAqCiIJS4>v&mm`Z6{MTqryhS5(B*OT#Vae$aGq_3adq=cf$fm zPY#xI&ZfkQ=EO=9$=C`4+M~W>^8Ng|jy65^|6Cf*Tj|$E7%d zm92*A*P`J=6GC0sMZ~gNaS%Cuo=@Jgd;Qi5Q3>-RgGq?Y6uh{VLkS zgqZYlc-{X=dQI9#la&0vPuIGnSaM9*or0AP+yT68C|+~Vrc9emiRL5hbW^Pcw(8{c z+Z8;3oTB@!N;O2I9C}C8=$ZVUR+}|rGo5~;Hv6rNSN?e5;z;7Am9PA@cV(`mATGd} z0mc7;*TL&tWzSUMy8;9S?uV)GJ}}oG2M1(Br1rq0=eU_(?{|-8bH5n-z+ydA9xFiT zVrWEV$A91mh%A7{alxbxjUt|?%^dMXZWB^xb06WOiB(@Dj0^BaEKh%ds5@zaQh7rL z10yk#l@Qf{7uIh=)r$u2EogS)^2~Jw#`#`bH{Y%>D&?ym`!zX_dZ+Cfa;a1g{mB}_*V5yUxee=9#*t8W;@)1j zN4apd@%=k*5=b$J7}f5bR%eLbaZ6L6E_rw+G5N=o3>1FL;tSb;R{$!(r5v08g+`PGmwv28P-SQfn(6eJi(o9~tsmZ!St zV^@(?wK(XaaT5pjXR{vlr0D0*n;T`kudBnUthU&NBkk)_a2khpUR?0txmRpweQ#>3 z=J{=rO{I)~jM!Cr?QBGqOp~3d8Y|6D1JIpbi^y=w7%54iC{s1{k|R=emaQhN1wx9Q zPA6;(pODMC*=sBB5%Y-yaE1e_n>kWxgqMHc*o>sTV#zVIsn?alCy*Qv)%@H7dw#L( z931pl#7`)J=d)m%IP$aGT{CT50@&C&6=Rli-;F8NyOu0FyY_45#?^Y*H4UVD5Hw$X z@5feU?$@D*Bq?8lKE*b8G%5;5FS^OJequ4P54Y;V>k;OF<$`5Ud31yk6BnPIML#sU zews9c1*rjRJ{)TVTYg$X2_~$LP#UvJqjwK~sKBHvKE{qw^ACMk z?@YwPK%{=DkxYI;2|~DsKy-Xd1>4>u4LVLe7Ph4H#wIorPfV5d$DciO(R6r(0*HtX zdg}#Vng?uH-=C4l2k^0Kiz8W!TX+7jrp9F=WR|5&b@R5TE*&~;v{C})pvw(&mI-u~ z3UR^@V=YAcu7;4tc`T;vS|7w@0#~*9yv5wF7f2?*xm%V>5f_a6xN6J<*t5FVQ9)yZ4rM9VQSTF*2MQyhz0OHaO3ket7XPX8!a30Da%h zs+a3Z=}jG)4QKR?P;ThfEK!5+eIY=^T|jEuhV zg@5{8Wsn4utQ9$Q8NX57CpoS}If-g5C71NRCgVZ?t1I1Vq9FhcI<^?p0 ze=QEr>J{`gvsDP97mZMF?uqTi6)b8lr3Xu0s~bmh`6CoKnG1ioK=n}!t*{@Myp}_? zEdgtM#ZjM5{=XG^!pjnB#*O`F1|ea!Dbrpa=K~vuIU zFTzs?Q8=Rd;slGsySM1{ri3A2$V%LLUM?HSm6c%lQjEcPWp2x6^#%%`BA0JL{-~qo6nC6a3@($9z$|Yu{WRNR`2@8xs9-5b{61CG80&klp z*X;i|-V#IiW(8fnzKqNhzyh`EsDw9>71yhFbKc5Q;$Ot*gPG;;WSCykt>?mJc3cTe z+-SKvB3i%G{?2>NkAYL(xv-JOTYZJE!$eK_GA!kLxuh0_m=Ti(wBF00cTUv5;ss@| z-f>Aig&MmKM6Gm(SwKkiUN-a?8Ru746uT zr=|L<-$L^n_)5z$>5^&hMFI<1{f7AOy3Ee4G9&G-tdjn0N!i7B_uk5ViC@Y#H-*+t zUr&C~cD6=!eRW{cK02IoWIQ4GgT?ML@5Y^6hD#{Elt!p95k1Fn7nk0hl=@uMSo~Ut z#1udqUQ|?sV5E?-dq4X-GI}&S0k}CZcqBy#Br~K@zs;YZIAkLpEmk}UiUWtmC~BG~ zDrDALYOR00cm%1@Xv_Me!BZOl&uhDqrJPX6AKgtbJVeArMUSnI--kNrzkEs5Lca^G+z@^`}VxnK9^8jnK3tmsn zCMMR1%>+TJ)!+{SF{$Nv(vT1!#sbOzt*R!JU zu@K><$0U`icZ5!ufkD7OlZ#FrhJPQLAPy_KC+v;F&cbi&#x zhhdFo*yCKY@IR$WXSNKUwxzwVXXG23o0F}74kcl5{g6Inq9Y1r<*#wT8w}L)8WA6y zl~)P=eMV)_GmiUh{{)$ElMeWZ8wjbGyC zj#$6>`ynY&6!SBNNLpLK682tT*x=ib)wQWVU^+)S1JPpU=EJwC&R9}3MEC`95tPlR z+wfcKMgsf|gv>FaBUAh{$H!@F`(Hh?E?H+pZM8Q@NH8qnjOr(8KA+r1c5!wRYuz)V z1HP|URsDJwCmNSRg(<$Ps+}3x{XR>~X^hz-j)1_20*Cqy zdW^unLRrLe4gSWZQO?;kw}9R_s|{m+)w$NljgZj%?S`gG!Oa6Tbgwv~O{rx4M1xxD zBcki$>7Joh6TU?Os%ZK58}ml`1hnB9CuRJ~kJHrHEjg!>?e$^Aps($~mJAe)Vz7DN zi1#<<)qx=P#wX;q>sZ)XjL`KmOaZ41RDE6OheJlz)W!ROVRYgIaiWE&VDAVuIW=0;0>j^VM>OGz zyVdZq{8ii$ASegQ3muz(1)Ucy_S)ltfF2h0;bryt?7VCM`u-~W?WdjOA5vr62J}wM zfVm@QO3k&ExncvPye?`nmmry4l@Ga$nq1!2ZVue)3`;LA0vA1)GD=GCY^Ha8!{EUO z-Q&SbRR+*A@H0jgEA^IH$r_%@@Wm~@;FO{3_HsEoPl=S>XtdvHAt-+eP1%#e?m%x| z1V-I&{0c*@>S@3OC}�pr5WIU2%(WKGeVW>J7>zynVXx|2nK#D$-5_K5Ln{BMMnr z*+bU&*jTXnVlF`=szygqtw?yw9}B;1(1^JwrEJY;!75XiV+|cKytPR(4k8LlwU@aI zK6i>iypWOdqt?1Hpc7S36%tk%M59~>Ykk-sM+=$Kf`|iR6?#&-PDHD{a(rw-WIe-L zLhsdt!_~NUWq@;8UY;To7nt+x*Y(%_0Vc2&-2^RU9QLmWi?qZ4)Tx4?8WRrrw80qu zSe>e8!p$Z6!%fuHnrLHZN9C#W=SoJwVbEQCrR_ZPy9O8+NGX|h=UC$wPqy8W;i@Ww zTD@r2v_n9dh<)u&1{ljjdZ&VS3k^Jkt0&Q!~QyJxE*lCP4 zM{8Wa)-yHRq;`(~5^8`5Rky(jSKt)39q~>u~Y!r?o81>vT>l*;$ z9kM_Ix|1kYz(PhmHbLL8NC)?RTNZI>DKWOM?&J66O~_z*!QO)%a!MIiW9H< zYSmApR64HxTAJ%NY^5e)2{l@VY);OnhO~}3^9gBpkl(+5&z)^vc3n-qwWXw{zGS!* z5w{9BOp{Yq4qtqXLq@K7_=)FW7kfuV<)(F)hjVgbIWtEjW$`D)+Ga@9V1;ACMmjfV z1N(PfGAZM+(0Bfa_X>)h$mQjo+%9$wWBt}KTm!?y>Uo(ntqu9h1D$^(jIR_xtcG1* zV1NcXlz|b1GoH`u!(J6AyI?Se$uxCMfwwsJ0f*rs2~})0e0eMF@*9v}jnL(Jsg)P3 zDZ$54=iub$kqGZG!e~W`T#WeHvfZjzDu)Au2#*8dZwwaED<*`{h&;k};Xu z&0eDHM#QpDFY3k^MmvQxzvztsb1O?s@&RaAAnN&j@QKzhDmYl1&1=Y*e^REduZ54r z?B(%hh&f4H24=g&H2ZHFbP38uFK@pyP=j(&Q5sTMKfcQ2#TwWwwmULUGr7Ig@Yjb= zslWH{=+(ttY1&@;Sy<^V>d*0of7B>>oigtb`9mua2{2m9ZVbXx2Rv_}5;+qf9cR0--G{dw}2+ zACU_QT}@6n0xLc(M|?>>N}oxXOxRo7j0I)b!qGF-f7r?wreL~3p;QQvA8oBXSH#-+ z)dz5tHB}PkD`2+2{C6sLz+17g-({BlJ(aweh#eMHDzMBfw2sY#0da2Rg{Aa3YD1R6 zaqGxxAk;eo1zyz2lp$6=$fLEaj2Thl6NYTWJ6_b|gh|UN# zIUX0)rU@C39`~F2dZkA3MV98MrGFwKd$TY)KmsCEA`S% zCn`cB?uMGjbJhp^vl_ks+FK-0JOrb8D+>zmC?`G#u7spOM(fDp@UDK_N_dk1ywv?? zW|5r{pG26?Sdop$@7Eh}J_PTXCVryq!aNoGc)NFwYK)X=ip99A<<{G?s9W@10Y;8R zys=;>U)<_kMKtLuvgFr0vy$}m^wJ)AT^SQrco`gZF)^`<s!0?vL?fFoyjEYb>G zppRjZ^v&cKsm9;%(O}pZUlmcK3tVIv^GhK%y~9 z6=%~gb^)?4ENSl%;SCTV@<_<2XwLXDHWmI$ofkB13t6t%(+J|SlD@XI;F{DDpkqEk z39NhwBnkQYbZ3Z)+s(_#Z2|OdLi+Yox}&%}UK5@Z31Vj%O|!W?^1IE-LEy4`05R*Z zLnZRxLj|@1mbNkl>j>l%fm8$z{9%d_me|P*kK;jjlaLejz*s2wK;F0mwRw(=_Z7$U zpv%HYX0X^c^}jBCWQtrNzd=2x6rymdZO2B{}CmB>=P}HJhAPZNrFet_BBS$ zBYNeng(8m$jA~``#o`JmW}8MEfsln9HpkN+E-}4RVL#*b2F}7!s6RYLd61&e#=Eh( z-1g&f+2o~r>)Y}nF~1ggLG_viydP=VLFK@QXc=KuRbW7yRak`c)fYe4R?b z@lv)83$Fii!k7080*o`uB;sTV*;rZMaOuDl5b(27D+w5eNCFY@`{a|PiM@fbo!*S!A)h7j{60R;tJlNeZKY}sShHq3lhzYx=95#ukaQR-llZJ4+w?R z6{Ji|zXA}=Z87#Kzz6Nl37?1{`lvh(L?Mu*K46!00EuE^5bvAiZlaLlJef^&7jk~f+vAIPMC3`WR+qxR%^lJNmp)Uzf@+im^ z1wuW7VqgEw4A@8_OoP+56qHgc$tFBQv#XC?|A$oH(S%~=rI^y`Cl$wI zLxY>hfE?a!bc#qwfyx)MJaI!FwtX>1oql&${!`< zXM+}WZzoA0;(z_NnJsXb z`0D*^jJe_OIvk+;<*m!iLF)aIW*`O29W)m1uU=sO*le@hYUJxN<8u68?YRa)M=!bk zb^i&U9Pms#M-HN*;C-V8MU1)yM5|2%{-%hV9R4uh&h!x5C(34%FyRdpj4uT))p*3p z?nKV>GbX20zJ8~8Lk(h+-#jG_E3W*q>i_F>R86zIy5}LgZ+CRh03XIR_c#jbm@@YJ z_o#%TLi)*3MEOt2WoBvVng$_-g$6r+90Gf%fF&ROn+JTq55o0q__d!@Isz8wg4Zs5~e*IkDooBv%pN^L(5A_cAciz-dCll8OJJ6xT_CzCp<* zQl6f?-znaOcaADUQxlZ3vk6(k_erkjG%=69A|yTdXn;`&Y%1-%^HW^>Ej9M6-QWYm z;D=mOCECb007|{IEK1V}UTT~NH{pgKyeKu!tU*bUnHxu^yQA+v z7H59?GkfFbZi~n1ry@s>6)Yc7gAmP%QFdk^yn%+eWRzq5(X{K9agYk6COYZp_#5Az z5vF6BaNhw!Gr8bcD!n;&I!6_pO}>kd>odo$*;i0}qT&g`3;R#TuRz)9UeMofHIczY zYenLd`Jyhqe=LnIz$Q65zu*kB82$>Qu1`U3wFcQ*#`Dehk#q}3Ab90R#fQh}al^`T zcO8Xahu_*8;&^TC+*nH^Q8s$CQ76>gWQ5TvJ~;zujC$e8??x1IPKg|Kf1p2x&My*W zHF7QVy`OJ|7AfMT@#hR5-sk6d6`gx(gi9@PA}`87nbpX+yPrt0!3Ox?q6Ie z{~90_W-^SC;l=?~0uS$JwxEqALm_k7{j`!0~Y(5VRDC)KfPqi4# z`A5Os`wJ$q@B>LG=xrxs&b9TqKA5M8K!0_Kb+ItYZ(&qrWo7J^RPJA84t=C7(X0QY zEH+Raa7d1DxD5Y(8#q9a*U@!Gg@!`SJP9n|_sBeLp)1IGBP@m+e_k%WfO};7(7pD6 zlXZ`0WWP-6O~gpaiUl9RENQc6MN2-U{!*&9nF6cRvA83@F|B91&6dKbNjT z14P0q>ttgwe_x{`EHHn5I9I++DH6J1-{LoyCK=0#BKAz|5!E*=^sAADI$coh`{6cJz$9n^&y6#oJsbdn7L6o@koP&E7sy zNEOp20h)if(NH1Sh_{Pe-fHJo)e9@T4^MT4Z>o(Ea*t zLA49hvi^$x-j|7F+v*Q7u6iq1X$Rdc7(rnjFr z=c(qci=OhX)#f(Ox!6qWb6+884%9yRAp>Fea4-SKDcqu>W<_NO1PDx;H0eicmCKty zQ}=qDw79je*1D^!>x$FUS)N5jpQi53Sl0(BGF*g#?NFC|dvSkolLr#8FcNk80umZ< zQsN@WCl_y@KMKul;A#t&89pciGsB0Q+UKT#?STxR!ALg~pu^q1d@KG4Nf0QcK@F(5 zsQK1qtO|}*xP>4_qoA(?t05OR_wD07lFZ`b(*=2(yVWt(0Rws#3$P^*9Li%}4(u1V z-@S9^8aoRM&)JzpVJOzY{Hi?5!PAp7Dk>_>l9To1u@B$Awe8;hyQA$8Htzu&x4KMU zzkZz%fAHWzKdlbn+R5ijuV!U$iPGJ(XHUh}l#I9H>EIb4G`p1h9I~^u&&{!9UVW8o z^UXK1a&mF2nVyuwX|5xNt}FR^vivhxOMNuU(rP8WM8lzIEEy Z|BMfpRh#Y%&J|?<0#8>zmvv4FO#mw&Ym)!~ diff --git a/layouts/community/ergodox/algernon/images/steno-layer.png b/layouts/community/ergodox/algernon/images/steno-layer.png deleted file mode 100644 index 9a2ba55effaa0b96f9bf9d31b81f3c2101c93ab9..0000000000000000000000000000000000000000 GIT binary patch literal 0 HcmV?d00001 literal 64086 zcmb5WbzGF)+BQr`N(?bDlrW?c;()Xu-Q67n0#Z^U4Jt8&loFDX(jhISFn}TEI1bniv>$XUPj;7ax06-*P#2fXMr6;*}%@r`sP7mVUzSEt9>Hm`p$Xx$8CQa| zw@r51#E!QdR@;yL&Wt^W0uKhx2gD8rb_e^T6=RG+;p>D4cT8O`XeB zl9}?P$p7-&THGuRDUA1gAxI8IgP((0lI!eQdH>7Xglb!Z-w1=SXvG*;v>vmP@cV@sA%rSR^DEnwy)4 zp?i}CbaZrS2wQw~$Z77s!VWDZzT==L^v;DAT5K2!dEWMv*zumQdow+Tz`f#17x&*x^Ox)@C2ZTeo_N)vWX*S{P!`L~qH=VN&_IO;D6=}QOW5h8xX z!_BPoah|PeWr;({d3~u~WC%6ZaGq;0OL)S_;}~N64pu!BBK~;R;{Wp@A7t>-YQ=5} zm*wHy=8;A%dSV&3H9{dX{AVwk>HkDr_0Pm9u3OCaktd|q8c(|-bcA1~>ily-B8or& zu!+`y|ki(3^Y`X;T#K!Vgm1pcmURW*#mAve0hVV2L|`wFmYSUKka*`%Xqe-hPo=s8iRi3Go?r5tG_0GWy{~L zfXDrn#^DX!4=JNh>ehWc7bj=uy04gz^SjnRE4xmAh!smI#7W_Pqe}K6b6~{Hrn%<5 zSi=hRtF`(qX%vOtVnbt%f`UStm>1`}ckjOD$`N>PO%Bf!^EI?PPu$*`Z)14<`t{R^ z#OU}w+`Q=hcTH+v8KEdu?2rc>!uL*L#H$xf&`9zeUmte%H(v@<*_IPK@;o+2^WNq6 zDM+1EQ&)Wt;_X7bx|R-&_dV=_#P+%>%cOH_jJZS(8HLl%Pe1SG3H~swyFkRZw0x)a z3H{FHW2HLBdF@er{x>*2H{T#JVaH`7Uktd5H3+3VK963-hGsojyr@2Xrc((5p@KZ?HY5rTVhih@})}Bt_edpm4 z-zjZ84c(__(Bjh0Uqlm2o5u^J0T!bT+wR)|Wk`HG{aj)#8_ou6Ib%uFH_#iMTWMHy zOKZ6jIj5A)4KxvBOLcYf7YCPKL;@$V9tzk{FRWyEM6_4~4^vJucRm(8LLk?>5so~P zb#uEdu$!@6$wo7leY$5CODBjwTBM=(OP!=|3)L3^WG8S!MGylwrXbSrw(9c(R4 z?!C{Qr^fq{pN|Zuj(!a{ZH1?1d4H*Y@45e|6}9ER$sC%S7JF`fFkBMtHNMr=b#o|>4GQzaiTN$5vy?7i-O zVO(8k8QDFalp%G=%{lnV7fY|2%4)nUa?<+Yq`@tQ2o5hWKszunJL z_t@mJ%`Azu6b6fsWN$pd*SLX9ji}xz=NBw!cMbn~ZW^@{!}bn?*NRcD99JSfj&CHn z+q2~BoX=8uUPYx&8ve5D7!KTw7NAIe3mLrKXDF(A9vuIr2fKw_%GW>p#O{-j&1)Y%Jcz?w88a#qASGVuW&!P3$5jg^( z8Sm}$GLLCLr}Dtks+z_nC&rIaT^gI`7j#P!2$vTkaYvQ(gw92QKFpG_zupc-0Y9S9Kw&{G8%%T@Krv)6Bcyp z$dR{4%Sk?0q|YbH{wT|yr}NF{LF-=JTQ=qmIv1_cAJ;Ad44Ln$#-`Rp*#sFL(G}{p zfLhx;_e_id9&rzm|8@{8mc`h?z6n_rTnl9o2}5dap`)m9%LLHvR&-WJJktp&DG|+H zKeK;Xjrn}``WbfYJrogNZMVg*y>hJN(ii&hiS6Fp2D9C*Ym*ULdk(Xt`zcAvIfy1Q zqa~4dk(Q%Z7gcfJQ+n?|@5qLZcC@uhy3u(>6!FpB)&}7qK{$3z`I;xnVEFR2l3Gwt zMavrB)l(opQJE&g6>V(b=-fg{&P&Rm5J}bSH(~qU2c0XEwRU*pZ ztI6cS(!ZTsx}L>e_b*(Gnt9I(hijhs&_JQLPGfbCrg&JIqstHqt@?8~{mHPA` zFf`CZ?#G~GVi`eW(Xu@2LFK;lcmmhsmzM4kzH0d=UxG*9c>?2>MdN%#sc08 zpx}9LHYiP?GuSoFiHeVfFOa*(DEn=(p8q2 z*v~IZ;)kP%ndPvzA18WB(v$_CCYJG!m~lf?u))vHBKmBjQ8-}t1tmh{;za$X)Z`#? zymA@$L)z=A_`L;KmJFiwiqwg=pcSWy7G3YRS<&wAj9!<;K)N!6HB$}67TMA6??q~) zxUJ(syua6+A`Oyzsbxtd{9`4Bon=YJR^?^7?H;8{CXzoA8VPKcV)mAcRfwTk95;Iu zE-KB>RPlAc&PTIBr}Vwg_Dl>8BOz8!_;uQ)cVBK_KjCkQSe#Y>;ZLxm6SxdJ^^&PH zWl5UPSlbG55~)G)c>AdMUJ(TOX_WjqM6O#*XRdj^`Jvd_{kONu3+Y^xkS}?;mM# zlcTuZv>^M)mLI-{(emjaJI2Fm+;0lOJg3OcpJqe4Bx+DSRLSJO`-g^%JT<8^H!Dt* z%rYm0#M18^&|_Vlmr@(e>d~k1$8_b@OTB050oX2K_`O6?9R1q|sS6W2EY7DmKXw*q zPRdm2@n`B?rUYb3RQx54!1NctbSuqtr$l}lqh05Nq6)yE_k!eB5DF{I+4>i`?uTo` zs)JGT_gmkn-EiyJsY@V`GYMxdd|efv+s z%a{2kWw%lA!N)h#>eI}W?>-=Hdt?2R_EVaN-uLUtcS#z`nwrueUD6%y`GoKYhEj$q zy_K++kS^a2YZdPA8~{nRQolG0((zM=gWNMmZ?oUJbqf;+wJ@J3F4Kk!{MN0bW#iY( zd}qgsva*@?KE9jO%c&xc6kf@Hxa`X=Qc5b&;KtKEFW_>1D>SFVO2 zIvCX_a!l5|e#~4dzxgpJ0cMZ)>`69c&{tPyvG*yd*;np*8RhU7XRAu}bKuop8{;{_ z(eBzV*Gnm18Lwa`Lb{%5E`<{PwXg`pA!ToH$S}n@^b?Ii?ys~w&p}0$%`mBT?d$L6 z{EX<6#Sb1AcD^AQk_o*RB0M6ChlZp?2s=VLcm#<~>2I)yDt$|`(@F@lK*4|CyY{cS zJF59L_N?j$ks@_=X<+qR$6($HGz+?TZjlI)=ZodLLMcm9CC@5;pAeBZ`kBWFJcI)2 zTljXE9N^gvZfURwaT}cER zI-%@7rZT93sYTU80L%>B;VuRs2bSPWA&55@QChb(=Kt4F8il^!d3oAkRFf7 zTrm(OuO1jn;FhaM!I`lN$|ivJT>*|PiJIN3X|R^$7s2Ci8kYL97jSkXWn6`OlVQTwU26Qss03w6VkAfgKs#am8dRGU zm4_|xzrvhpN#KA&kjAX}-xLWE?8MAq#E(m=B+bvdlVQ3&Y7Iu^?S~_3zH7OWdtK!B zuN~gz<5TeT^!(njM747j(=m2Tl#+Zq)Q0i$@_cu=!b~LabS2esrooj@qjR0bY=)d! zDmGxJnP9i|fb1gp{!ZJm<;CT3M{l-dfcvP1hz)?8YYQFsSNmU6Id(W6=ocI2p$5+kVn(-byc<}T$2M5REelK$`Tl~FeWmWC;;H>GMd$PcE zGBcPZvERp2b?rm=nqW@QZ#vTk7e8X3@KN|ASA)ycGd2D;>id@`w$j;WE>y_LndkaB zTV+k}wGIg@(bdQ8)qUbdNaMnSRv(b|XeLbBSQtbMC8qSDND?M->ZK6piOTMDA?H`mVGfxd_{7A-UrPiQ?b1$8+|kj|I1pPv zRXlCrw`yk;nRUk{V-$Tugh2a1YmyXRL3zZULD-U9Wk~`8$l(!fXQr-MkS-^M?Rq7Y zO;x*qF&8=kuF4ez_V-PYJ5RhAh+LoVXM9B1r_P_>ldgi!e|vEBe9k_ew2g-g3Lfa+ z&lK~rw+>L4GvE@alBIAkV7woEuR5y$^lbGFFTHo?nV!r&rp@+UB63-1|MSf!$+kBx z_sQ=3WP@u4CmNzHd$Bv~HAEWvPAcf^TEk2EcN!?0UE6p_mt{~zgC@$RKJWK58@k%a zimsdr`3b@yOA?i*zsd$4_{haTN9GGmpu73+K*<1kjV;r)>=B1s~@vP=6!A7v@KZ=(OL!8j2q^6 zT>aSve1)k#L~asF@aeY6J9hWbV$n&#r0w+fmWo^CzrT&XoNY5a!XTa5ZL8sNO%z3i zZeo?1#P)!mmGHw6tf2FP#VDnKT(gPQdg3Fd6Dc&p(r;5~{Ommbeu_=c^Bn7y(x98S zrQ)R8^bjk@b9)DgTx6@24?FBXb_UrFNRWf_MM;;1=uCzUuDKZSg~1GOt;aHfsskmr zc}a>C9ertX9h#tp!A-~_OpSvpS+S$XV56cRO!h{KgV=1s2+xLNg5jNER9bFu+)dE zE13cbOWD!?n4Yi*z)0&I2ZH&lA#&g23Y(|SeP4psh7T+P(^ z<@)V=2SXGTy35-FY4b0_kL9=c&2-u9PCFmy>iB)3qjf_r_DX{*mTpXHZ#U??Z*Pst z>ifd(w!&uwv!Z37_>FYG+nSGFGM;2RAk*R#1!%zGLkv!v|DOZ!RCLVzmX6_SS7x)- z^4#(7rR~h?xIH0{=aiZ@q6OW@p!bO`&g(_mKPD9hRQoP|Pv|?|Kn{cC$f<}Fo6by{zn*J-To`(t`8y=Ef6U7Rz(m!*@IA zsEi+YXr6WGn5T9Tq z%KqAzAZbVtucW*2&#$pp-)odcJT4Oq>$y$Ohp}e^77WWx#Bg>)_9WkBUs9U=iuqb@ zf=fd8jhOuYH!6p^pRZx7`T1#hAb~ilVBFTfHpP#P_`?)pbP_-VzvRt8bpSZM9kjJd znOlcRRmSyt7BQ|=NMqjOfz@Z^lVZ-o`5v{a!V{~Rr_Q4-_}qFPy8S+46Y>4y?3C-J zrQEgl#@S%ClVc#@Qx^I4XB!Z?u}s&MbF=)|YQ|J>AX9Kjw6UYB|LwVGT%XBmn>CSD zr$dHI!3<}woE;P!LXQB!;v69!`GZr^z*U+8i=;cseA#WR4tfXzZ87k*mj;vY`r}6R zaSTLE>4UJ{zt5bn_@Wbc)FJna$s9+tYH``j6BoJPwd6|`jq|bqVgWf|HDRJGC5173 z*OvpIbo)hE*fp*CiJu2HepUh;pDzGKOjb4oRRxVCib>PY-x`R7c{ zV*6XIZVb11n7(&-RLcM7sP4o&j#&F?F(|euRZcB)_8#iw|45xIiPk+DbB||`F6h(? zgHi!Bq>O^*wmC}WC8y02I!f7TQn#;yqow_vd37)=2C&}We|_O6Z|zWwMH3nDI(V?&(%!~rt)O+nK zHj{+U-Q1J|g>LKifMYj1dwYCKrBZRUwvc5QY;ZwB(Fx$6Jo+!%*pEPqx;W4jcEEkI zWgtXA*hncC4ycM3w1Bu6A}f>R08m_qVY`G3fqo6s$Pn&+Y@{JOS~TFIKO!}{RKZ@= zdda)Ayo_t6s&5%Z5o6$B2kV^PEN*ZJ)$9JAtR*^o4=Qb{hC}W zV$xK=b-J$F0r^Su==r|*RX9Os&lf8bqWCs%JP!})z%bv6zcmK#H!%)csh8Cw*4oj> z7om+@>f{%C-9AxcS{K^b+$nPIbZ`E~P72r9WM`0hckrvl-Csv}nVO zZox7o-Qc;BTd=!MR=z;e!K~~`bLM$XmgMEqw2t`$)Nq**zdB5WZoTbnENO7J3Z2Ln ziA#m7dH+$3xnqGDkfV>Xqnnzh+o3K4T^He6`ETAx1H8KQc!#+szw3i#{j$Nj($pdw zHV%Ex_Zr_*`PQX`%xOlCeUJK!`8FFKsjMRb`4+Svrv~SXU%EzuTWX(czu<0DybOZQ za5T8>%i$G=UJ#>HYW{warCEW$E0KZMmhm$fawK@ooul+Zy0y{LWo?b+$8nZph-oc8 zp@?G{k;qLZ;oSMi=)$@g)a=NP9+p6F6);(dnb5lWDCQ@AZ*T8|V!5p7ez2isK7#%)f;~&W{WN6-&;xG}P4e z1pX>mLcMVuD2l+_=NAThrF&d18qY|AB)aMua!e5jM?QBCriF{nm^Ilsp=i-f6#d@{o zGNZf)F@|ud9&WT~$R~yDxQXfb%b21Hxm>-u=d880wS~cByRUBPb@s@N`S`sb9mdc( zd4|$s4zE=&ik-m4ng~4u+5M#;4ZZx5+Z0t0x(Iz*R zjB2B(xbO#$AUp`Wz_BXF=f*n{Pj+Tac@X+8sUkVVhtVMIZNz(1Wkv{xO4^_P-`*BG8N3f2$OH$BWq+w6}Y+Ie4n=2hycu^<8L((0i+biIzHGK=7;jf6em?Z_bD< zF)SnGTASB)hvjCZETA#&2qGAYeG!%`XgD(Z&I9pub7jHEvGqhP@suikQ!K;UUN_!mey;`QG zT#JMB`8MU3Sp$m=P}wV5n%e~t;@)eapdcw_+^}#G+b$C&+sA(yhK|S%d|bZAFIG>t z#BjHGrSTu~#D|#Z?X$DZsb}0j4|Rj?aM5#GBSuMz5;&>m?da9jn@9?~E_ni+>Pu-VVm$ zGp+jo_zN7$;x{&PK2cULi4d)0UG+ear%H3*7B@7GZU0Fsjr2@veC9op5j`T{a%xAF zr03kRVHC(m#tUTzMTnE|AJsH*(D-}pMAjrdlU@^LSC(&-X*~uPxg_Eii*l8UO`P|B z%Tjht`EJ>pRIr-ICN-Nm);tabfyZ+|=%}FL5kTwSm6?AaaaT(XQr0mvFc8l2Lbmq1 z5+3Ph12{xCvTf(H$3tOi5V>%)dbckHGOc6i;ZtH?8SG^8X#M>u2BO%qJBFq2{SCqK zvy`bkYsFpn<#P?kY@kV5Fc;wLo6zU{8RP++E`g z1?^o*18NKovMI5)gczZpW>hLZ;q|M8My2a4@GB{ThR-z2>`@zZ39HS!PPTV+T5L+O zWMjJi5kIjz3sxWo;(WQ?!u!2ri$1~`oYVW2r*nf@O;?Q_-LuI&h|Qgr{n113i>3FQ zu?+W2l6VlM9QunB9MD`Uc*OclCVp`!7l>p}9_Az_gVNzs8h-i*CXB4+kn!Yk(1RjD z_H}J49X=0G7A7hmJg8U#>q7L_T{bq{GUoK>*-R}Dr&f=-peMc)sW72UO;n)((l3#l ze%!?f;6Go^h`}3I^P5%6@e@|eHQ!Q3bhBujtu#?GD4SAT6aA)kpvZKwCO(WHZYl=| z{0laro+Ln-kgn}a4FwcNQvZ>uT-cobQmY~TpwBU`>?o+o7&*-l=8=J%4Q7~r>RbWm0wefa+B;jF)1dUuh+{8p0J z0zTq3`Fxk=z1k9doO@R~FCQ2!P-tNEqndZ1~WGrd}W!6v)^c zlBS=<5@Wq2xpJ(B`+2-PJ?~nKfRLKW@M>wiu16J>=h9MdUEt6Ox)BFbXm%z2(tY(R zId3WyTUmK;{8och4!M%Bn|$pLPV6+D11c9I4-W)9;%P8EI#&EABd>W2P0o*%#cjOn zdwZ>Z_fDKlgU(OA}*6BwEf&ba7l1 z6aDCeD>qW1%V4UALM%eDO&EwP=mrcn({j-BFr}jbS`g3^7>vc}eR!YD$Gf z8F86-D}QT=p}{k>o;{lASc;%vbHDN$%GEpGIeSi3bPbLVkKkbXTtETf63#nOXo55V z*t>X9kSY=RWSQJa82DIco79qE+^XSJ*dB8-5sZ^&KHaGX8Y4T zS3PX;bCI8oPik&m0` zB#cp9Qs!@03)ngto z<{cV-s45Vor~&)t_3`~$lGG=^AdZIMR=P*4yq$Vl_Z|(hz#}Rk%avY(N~_Z$i<_-D zflc2Z&kF3)sV%MeAnjGyI$=@WK)s(F%WzC37A*rMsn%afFJs0w+Dr@!u6VbN?U26F z6XvAqRtHVK`y@H}RTxJhq)uZ|`|r0`e%{$D z)#(xM{H*K7WnYw8_12vib0}5L%eUx%FacXBb4((AdX`>qb`Tqo4eLx}6HQsRRLHfM zR8=G3BcKM_;POY)%iqqEXC6{JIhVBNf;+nRF06$IH)aQ#KGJg#Ak@@58q5Vq76Lgcvu%0?1hEjZ#PN787?0ElddsytVKV*j#bnM=mq zI;$J)11UOOe|S7*Dh6cCIf}i?AW#>2IMF~>e1xyIiCwl4TD(+Xe0Zm2dgZtC@|IKT z+>-}EL|jAYYO|n!tf5>h2kmMZtBXBst++eI~iW*^DziO$2Swr zSeTRBG3?R4vAg>4+blz}H%@~M zzy4IfWhszrn-YeW77N$Rzp?RT*66bFnT5ejiT&0BWJ$>J@*{Y{U}H$*eILq}{PN@v zlafp4q+7J`W>Q%2cX%JuRB9vDCNM(C5DZ82Ky7uOC_`@7WQhlJ)dD;NyN z3f;nBMJ;iK_;r*p39fUucHzN69~1gF;yr|jE&bGnl28$VCGOA=fZRR?6Qw^er9V)U zWgNBGlldviXT2jp^HsGRIa@mf3DX%U6ws83t?Kwg-#Gi^`h38te!A$HWVwF`VyZ(Ne+Wj!*OHv?z4B`?=(HAkJ4| zsJkX8#I~kh>cdqGaK(Ci^QhdpklA!9KPX6Oqz}7n6$mdcUG2eE1Waw-;u*v4A6N7^ z)QwMI%u_bj=`@=B#)q%5*r@n;k-`#-@E|E>DbuXTRX$TnB-VEmW}lk7TmDmy!Cet*T5}=l(_L!g5hNIyPE9SY)5s)B<|oE+@r>il^npB9>=E-STds{9 zpz&lekjY>|z%CNfmEgiFk5>Tb`L2LPRbwHdWyLcE(QQxa1 zRu7Utw9*C~3+67D3-+z=FAQ4u)~=`2r9tu=VsY#k`S~Lkb{plb%3@Jta8d@2a6DKZ znHyJ)>O<#kG_v#aHv9N*xM@C)8(24sDZdgoUvwiBiYeSUB2HSiFmzx|K!1f;q7gj8 z!XFj|79+)&Ik&9{T6r^>zUBeHlsJKrxqo;`3OIL?h6KYw(?=C;8V8=N0!XHI<*MRP zOHdOIx$UoxYD9~^5g@jVX0z%4ve!uk&1F;hks>E6BHPz8n*d5gIo(dKVL+nn+b*jn zs!v1A_SPihmqv(ESps@oyf?oMB+&qcfHi*;I0wwhWsC`s2w-a3v$rZR(wD9Rway<} zdv#{a2pZL`T_bp2(wY{a80HIAV*Y^Oe>QQ(9Kr+mSI~S}Gpr-4QvjK@6vnpSM zCQv~k@{Z$o$X%DouN-5WRSf_Z3cJmQzIyfbK>nH9+-mt$Y|lV?z(@$2<`@A&m5j#5 zdIA1aB*S-K&qU{`2HxhdC?5y9P3ip$!V8TttJE#0iHM2R<>t*tF|eJ}!iCox#Gq>Y zu(jc43C97bL?lP2M!2Xr0k=54HXQWf;f!YEpQYdtr?~*ywMN95pcGI#mX>iN?X2tUNdMnsS@L~CU{Zm;#wa*@1#cDMMOB||Ron}zsyGczS=lap8#Z7}Ty;aW42m(ocD@R)Iw0O# zd^X|nrPZOI?w$$Q7L;@k!-#!Nu`zgasMz>9?A=c+;Hg?<0sII!9^W!=Hb{VTv;{qG z04alXiQ{F}v$I6_26VO^&&PDf&@M-p9KVrkyx}-k*;X58tZinw6H?8-iBQkJM+fXM zas^?d&q~b&LG@8T+yCq!&+9w$1vmo?@?+@$+iFNKBSj&@(Dq-y&vI`peY*K41Q!h~vQ{?xg%vN9v=T(PW@d;}sMXOiWCqC z;YEeKaJ^tRcmFfC_U$d#<-I_XOI>S=`&{U+!$iKfpb7feE$|4lp_{-vAZ}-Y$~DDM z?-f9)w2`_24rC$kexQKc>YC~53~aN<(C~F8BPCRhYYS&I--Ybn*qZ-MH~-0>1UNAl zeJIuZBaakk0Ttd@G!3H6+87ar?nU7E$dO2x(ZvkSE4%k-W^FfEcu7P>W8P&>QaJ}8 zogn}47LXszM$x8278DeG-yP!ZTz8!oD|(v+Ws>y2w#<3S>P}b`O%MbAq zquZ~B5i<`W1snXDu9UnS#_CH)#vVt*N>qN40Jau?0FA3fHZ*{!Uh zq3~I38)4lEwe*~;=4bfHCvz^zk#;{M*ci1~RgSLdWOMvl4EKMmC1M`WgxBcC6Iyj4 znlzdYZbLs;YSXJWC1(B=2u~%rm8SBN#sgFz3?z-MS@e{0~y^6k{k-H}zCqXv? z#vaMyP*PG+&@$5+%F2>7`qOL{;^?!O;vq?qpQM10j3I(c(f}})KYwMgD-H}h$p1$z z%im=GBd%zOamWyM?3;WXyTCee@&U6tlKnr^hm}vq*o2nr^Ih2r>K?HT&v|!_8Tu`R zp?N6L36&mPOrT{G@;uBSM#td*9@_4O+ujzTfmf*Urz!nD&==SRC8ZsM!|1QY$Alz= zck4>kaOt!r>HlA9S!Q!d1Ofg$Hx46+CvyR4W-6Vwtz9*{msUHKUqew=lMZxO*gBun zD_~5$8CNP7o0rGhpD9LVVq${vVT=20-PG~c#7diMdBO&Y#h$qC7})8+A+|T}sswhT z?^gzH>qtzuSnL!(zycJm|D<6_9ygN!1DPFaM1}c51T46N`Fx^WG2`3UZK6C2WWX~~ zs{DW6l(~DzcU>S%wKe%i@ zq2&H@cw5>4n~@o8*U$k8ZxyRlmc+oz1sE&F0j=09(C{UjOVhW^lwR>*BrHqf39DOg z9Fqa~X8h2CM0fF7o=F02=7~Xw{?Lbzu7}3Hhwk44!&jf<`{`D6ZBEE}H+|#Gb(gJE zD>ny+YF%-vNi~oA75T44|@?M z>NjW0Zy{sO*xBADch`DbgB*W}!w}ozUcmdq$YlKIx~)G6S|x4#t;4lNMZLVQWHRsn zV2z(Ms-J_S_q=`A7@^hj*aq+jV}sJAGy$8=FzLY}Q?fVyn7b+!fHfU&&gOV7^GXpA zKw&T);`MJ2j$}wel9?mp7$Z&|$p*IS-BvJ&9}4MwTURtd!A!f6;b>H4*>=Zf)~?`q z!{|%Vf>jio5*Yy}8u|EnsuWHiD$3(vwFFf*TKTNPFRf$mAvHDiO(KMR>)@X*UvJoC znNKVCpPLea?A7l$r9Rs3|BCYMhKtqveag7!^Jp?!%b|^NEpqAJOU{>yekEmezYBj% ztvvmWay1QuMLe*R0j;HrArKr9!56+9z0@9Vum8U8QYz*nih`eK-lRnDdA7LRV0C&O zZ*K`;tDSsaahVi~g7-Gg=0U(FG=XTJ=;&FpbqlzcBP1Wrh74E1h+uoG#4kx1CI}AQ z#_Rm}7P=dft{5cl?ukHCIir2TGpJLc%rb$pIA_PdS91$9eof$6CZ@mA4Nyq<`wkDr zDcMbH6-$#!B73!Oo8QFK7V!CB0+?<=VIjaDBKn81#OPL>QrTEz2ED)G323)A%@+9& zGL;*A#Kcevf*4PP0ISY7C@C7%8T<2g2|1GSo;MaP8PjUB0ZfLX+bNcOqEgY+bj^gh zODWs95CSN27cH2;OmV{@Axwq9W7a-w!)^yN~L8~3ZH2>EDmt;eRS7> zNkq3};|aJE`Sz@!kLudyuA^xIU=|+YAs6Yo5#8&S(DwGTK@$uR2>=T6;*0Y>HA~RP z-=gOV0t?t$8w+&3y$a#aS-Y$3skk&rGB@Fd$WJGwR>Sx;;dVQ-&E`>y1HJfdfUkHH zfx|6F5_fBUV*|A5`#=f<+k5Q3LDr^Ni2yv}rIV6LYAI6&fFD~}WL6DM-QooePE5L+ z_3IY6A$t37lxspv724 zXl;`~(_91ec#HD)1x+JMy(IJfVYeLqUCerfew%h%?;m28H12| zW)-x*{81JdtZ%4)&Ct;om_V-ZqoPpP4}@WWWZ0+pl4cO5X&DoqdWIL2iz9IB4LACG z+ESaPGAfr04Y@B~0=RzH%AY^oWXCKGx z6c)pfoQ#a?GW6m0ALEJX$6WzCTa!J?C3dR+@f8hUf|MQMKaiJz3@mvV7mHIL8 zb30(bIoy`U+(Vu$mM)h80}K0bl8(B8UJ1B@LT*xHF2y9Sbz&5$mV5u-iWEXfs6NGH zN~nD1Hef>96iHBKs%p65F=RK;U$i8{pFQ5(8;OSYkWeCTHg5y7%s&SPr}2v=`nwfE zQ$`*!c?o@kUj4KEQ~KdB?tUJy=;;E1xd@|4#jZ!dFvu2Ie26_Jb;M0`mmhAEh%sCb z|8Ez6?wa|KcGUx-(>T6TjD`5R5;=3vki?UoX

    I(Bex;?A5`xsbLM>%eo#im~+Z z;!rcdVK)^9{_rP4l-A!8uV(I2BoSs}2WbF@PP7**bk)D;5e*YQ>p*I~I?yZ|pO3Mul-teB1vDy>QJ4gTF1t42-;g*fP zxCrFDHctD5+YXnvSkvv^_393mpDYn)Ekx z|1?naod;VwhX~P!*z_FhmgtxmA_Pg;o1GDPTuxS+Mb%iRhd`0-%Pt(E0ebsrjFBET z9p+ZOERptl5Rt4-0~!y*%!|fAH&^EYCxA7hS3?xTUNW&NIc? z`!+r}lcKmU-|^qIYboDRSq0Ys(njM8OF~J&Qt{V=@VScRQmFl)#o)SurcW}D4vmh2c0z`QD;_J$aIq++){e4@WAu+dFG_S| zH?h@FxmNR_*R>8_e*(v2`(vR+T9Xbg13Bc;6&xOtTB-r_h6HAz<_84Tzn3(O-f!RG zGPitVBv#>5l3qLYM=tkM?ZE2jBC;geHZo(Y><(8_y@mg-lHkOINL4K7eV`fSw-3Gp z-bTC__vSHj(+Yy}Qrx_(mq=NXKS35eh+09*v$hxQ*NlMo5?WP&^A2OnYWvhIS!BGQ zuOMnrKVA5j>8m0@eKXQRmSh{~*^bUXUh@zl%89~NAzkzeon{_h65tNXkjqK3ZLNa=;-t9I7UccQx>44Ou`>^M?+QYOM|>K#2Abs#9}XaS4M>(~J87`oXXM ze|S|l)W_$N`7wHX+-wlJR~5fb7bSujgLAa3!iBAvauPzr(DLZ+-tdYj9)t@S)_@*1 z!9QLRv@N^xfEm`3sKD4A_1{lHV#qEJHpS}bbI!AS!rP(oAeOoC&jL7^o zwBZkC%<$Fk;?MwMz<FT1O-;7{ z*u*no`${MiqnN% ztv_#bp!dv`*C5b47zcpOx(kn^oq7!=(BSU;y`4xAThXb87(-y{ulYtb)Z!ml)~^Ie zSH{P`1rOk2D!V_Pn)VnN9chQM=;}To!RhL&@)Ug1 z3ioO3bX$OkRn10W9DXPyUz~-2oJqPTyi1ZMcY4PWqyJ=+w(Kz&#zz$EDbf+;o=ro>KkGSNFNU-+PM6Pz%%tD6x9l9huJ# z-}+w*f+wu8&`f{*OAi61v{TdW=`A-d1V3PX{!PBYD6eYag$3Y{>Fks>58Ur|^!Utj z$b8?>=<4@$cgAW*)Uxya?vX+@+?O|kf$E%K^%S(n9637RZWVBGZDs?UioK{xax4yR zTKaAObEbO>#tkSiYI-G^?P&KAhduaIj+-}chMv^xZAofrY4yh08wmR${E8ei_D*?@IPDLY)R?24X5VA0E=SRE`0hU^ECE zZL;Nk7)P7gXBM)3YFEgYTJYI1JXu#h-C01*<|Zyai3M%EMObN8Wv>#4RwNl@cjd(t7a`&QJ4=;F}-@VD)&lLVZ< zpx9Joi69nZApd=L#H{oS1Q{m#msocHe4u+WyQM3$315v038Nl-feeGW6<1okr9kPJ zdQ!Ldsgj6yh)_~e*711k5o6yO4@rv;iy%#$Eg*v9V@)0NPaOLsapy26L!nQh^p
    CcLe37MIpPU7c2mSwI|7<>w0ruuV?0Ylbvs zaD$n>0VuqNn=EO~e_(I_N2O4shF4%VcQQanQ^@<|_%P0n`gx;gcRbYuBNK%`T--=B zxL;`VfnGxkaf+DPko9s<7bESA4kjK*#(9rP{Vj!11v*5pdo)^zpNunWWF?Lk*!f8f zh)K|=>vw6oi)Q-w8X{;U-K1rSA}bBX<&BaZtS>z1E5`(?rsNE@3BcrjF?7Il?2k`J zYV!5Uv#$e~-rO_l+^qi1Udd1LkQZ0~BsJ<5NDyVw$iYGRx7W9g{T{xInVI*_-}h;R zd>1Cw%ky}oVLCgqCZPC*7eiVLn1R=temEXI@LASKtKDO@HBdGSwJ#cuQo2aMjwW6C zTO6R07kw2d@@s)5I;Fl%3rmC=t$#2Zkdl6aNke!jvibWeHFa#zwgm~@mM;<0C-+I5 zI#U_I6Bd777=aDtFL!r72Q|*FsVl9tb9h?IU{v?l^uF;A(LJsn`y3NnR6V62!W6-H z78h5NEYXZq04iGEiO_l0pur3-#)8ktO+^YbuCK~9ynlhUeX(e&5Bief;TXna9h8=H zRXK9!dyEE-t#D8I>_p`Uk;Pw~a>3v{khg?x2E>gOKQ7Cv=&YOJv=&29JXQCL`1r+6fA=E_+~ zE*-bO93|PMchyR0Jb||z^?ovx$cidBU&+EOBPGXp^^16Gpi$rU&K({*jaxcUI_w=G zN~=I3X4gnd1_0Kbz&h|3y41mf&VN8W4O>HixUoFGqYu=`YKkUU(9ok7FB0-{bK!j2 zM>WR7V^l=d)v<}Wk=l1e%eu9jof$tWXM`i-w=&*ZN1DiBtbK7bf!HrUhpA&(x-lP? z{7)2Wp>h|^m8qipXlmbOkSG&$NSel&nT!fRn^mjCDvA}PO20@%f2OmN{3RDxZ5Sj? zqX2SDT!bbVRH*eQCW_$8g3D#E!=BZi2*;i&udy86Cor?CX1bq0?+_Jg$hy`C;vugW zxFzNJ3v9H}LjaYONC*Izy+MHZ%M5c4QCG6DB?=;(nL23w@ZF|Gb9f#gOq(AXKK6c3 zd=1#Y(kevdn4q=K16t+*k0}79Z}!={p}s2)vP(s8&lYRm4Ea?p&bxZ+i=z&r=tBc>fKs0+s#6p2HxuI9g#sLpIs}fPi$f6TRpf z{vRNqgJ(}anrDrM0D1^;Ka73N3YOGS5)fYwm^u<)8br$Bwoc{Zf z-P=34NpB$4uY1Q0EEWA=))<5Y%TW+1Q2@<6(DZdzhe@G&vq)=_VA}lv@L`U0(g6Q< zT+)mmtFz(?qte(fac3T2t`v#5yu9oHHcg9iFSP%g#>osR8~nyaE&guWH2DnUNb^0|2aTIi7(6+1~*+jza>wNJcnlQ7SxW1%v)QNOJ!R zm||V589k2_894heHNgRT89;_1`3)2?B?4{-Wv^NY^E+L5hXY!_cUNBJc_Q2~uc0&F zRKz5QeLw|ng#E4du5*?zwY0($y~^mjbHoA>jJ*fny2C(AfO7>2;YhfKVnxpWW`B;^ zaC@4i>S92x9b*D&+hHbw|{ z3j?Gm2r$kU#lip;mKH?u>L- z^hS60Yt(8mCv}KHoW^#pzX&_N?@&PdK_}c3kiO(eX~Z%2%LQMvCyOgtSs#WDtWKndFA(|0aieLt)@55lLW|8qCaj zC|sXmDz~xLv>jBa=mzc(4pvHZ)rU;qVKU_2AU6|5H2_!u4tBapNFd=IlL!XsGqmHC zM=`^sZ|`t~3wT~fUkW%O9^)3-S8V=tCGri}W+#dY1}Dg+zW&`HrUX(Wj0bo{ip9+% z{16_|J^rKJToaja`;*~R-pZdX0PFEJ34t-${1_JS>}m|P-aa};M&4RkObbc08#F|0 z9}US*SUA(QW%j69*%EC9q_r>6tLv1u$_+z1Ar!!|qnu%1?cpJyXBi9A84zl`0L+U& zlsgy(MAt$kb1@jPIQ}UC$d)sOQwHiPyU7OXCvpn=4=c z(M7!=#iUmH6@oS>n%>v%#$ll8BQo<^JBqG+LR?^%dP$le1){j3>VgK$G^fKS$iRM4 zhSA9qCdOw?oE77Q5LJ2p3lgFr4#m3FCrNvW0!H~9-;182cTU$Q%&9puaFJe7TD}%{ z-8(&G@6){d{`{F5?SaTS}tkpO8hbjYVeQ-}T?Sp%25erG99S1Y-Hrw^`q}?z_ZjCMxFoD!q zi}w({!V~%H_d9o@2}{FL!jHp)>vWfVEn`57YZsQ97--buo45d1AC5(*GS8RIQ@2ZPS!n6p0(g0^eII>)~ zap5X_+8goW$9TI?xNoH=0d1c=$4NleT8d~E~8tfY^Z)6YY(k4U zD$4|C*WSMJQzRoAV@VD$RiTS&*P)eml#FBe~nAMLoAIQ;rlz{=mA zzFJWpFs?H-I{;w4&J}JFe$kwcpI(gvJ(E)wrj=a-*P3#>Pt!$l;n;Se2oGz5)(HMK zUMXjLhNLJO-o^))P0w7eqA|9~44n{v2V!fyS#-!dv1�yPMzr0|VnV*cGy9F#j;DwsX^E#N)JNWyL7P2oyg;~Y|_{%j`Oakj!D51rip@;m1sg< z$P<&}mAl}3Hr?PLa&J=|hVpbJ048^~)*R@u&k^w(M&C7r<{NwC|CgOz&*kx2oIyPf zsft3_au;FCo7vA$+-?_)e;eA>dea7HU<0x#BINV^#?zaP0Mw)9Xi{0ru?P2GM|!!Q zJoj59_e5HwQwgrD!4?tOWnsBIl1TU2ND1yN;h|U%V&q+S#ti}->IP;MtS-GbmZKNi zXMG`6KhD7w`x9KTbMUe@Zp{!A7(xhh$Sv~Q#Dgisj{h{MW&yK0J%CU=#Y83s+MQwn z)i=(u%Bgz;Ff!?K586L~oTANkzQ6wUuiOWS*2CwLw>6DJsKnO4vw>4vyf_ypXO-th z=v!tT4TbMy0OlHJ zj*4_82DMW~v}1cmw%!Qxw|-e43)ArB|0N+KCMs_+*(q|Qy!xP-kXM&Wa>vwe^}3uJ zlbj%Cy<1vV-WC_i`!7?$7Tf(Am~dd+l5jW<4<^2w&G{a-;(!{a<=pw!@aR0IzyB?1 zPfrhk63=RDLv=Cpw!Vu+3S8ShzhCxp2fp6NqdYboc3Z07?)Pe&tkz{)Z+i#;RBhh0 z4UQT8b#Os_LADlj<3(%wb8Z!qou0oc*YA(IkxJG<^Z+b#Zw;HWx~I@bqoCi%+VhmX z)lbvDJ&Iu2cco5M2b5Tt)U>pZfdDQ9W*o>aCHIOk6`jxzSUpTG=vZ}Zp8n|Xjj~Mq zM)QEn+6Tqe$3K#Y@9`atZcEve?2r~WariWg4!J%i^^tj0`gPquAfX5UQB*u|e&Hni zrmS9W{*Nlr%EO+V3jy!vPyQAaaz&3zV^bwyFLru5-Xw?f{Ji(+$31`+Dl3I6@lYum zmp=;LuhDUI`UQIK={_tjA zNFgLA6)(!AGWd+m2{t&N;?wcIDle827u=FOLhK z+I4UZB^vkl$7x?Ldtn-_jr-o=P*=82IHXC6!O*vX&zA)(msSf@==uo1zSPH9te&xD zDAvp2&d3|>f%Il`7s%Z9!_8xBG@KSb0y+!~!!8>imuI$%W(2|>Ftuvzwc%$@M>7GB z-Cb@yCvzqT=Rq!+<$El0!?Qa&*J?(}#1y@jP9}7`7#8m^(69D!;o}FB(yOkDvVBfG z+l-*yYscrQH?f!!h2PED=mC65riuf#9Wjh)x#ve#5x#rwdA?^eSTzGbGxAU^-IjHv z3v<&bwC%&{N|Nh-_=W3%q?Sfqnej-r5i9inI3bu)$#uh)XS5shSt>v3+A=V>*!5VQb>kv0PajqeJ)ZtG z3b9+YRQ$YeceA%@NKxQHEPVTx+2HLq(R04*Ec4XIv)1Q`5b~BM_wMGD&92+VBMjNU{py`Wx%c<9qWb^E1$ZljP=_E1%)T6| z&-&FA4`QPUFkbU5neyRqO^)CIjAU*;%rXt73Fi2z(COu@SnOpN7XQqzIzgNL5iaK155(HzRRxu`g3XnV z6bok#iz8F3zlbpqc;r_h-Dlpy3I85t`l@}}unjW17YYp5cV?iR@fQ3Kqas%NZzRmX zTC5P%yH31H;{DlCWnpygV|j1NxA+n1Ex9F;jHz*Fn194kezY=Xh< zrr_3W-%U=cm^~0em0*N|5-N3ES?IQ|L+ia3=?M2MvOAqL>n##Q(TyHR9bR<6fi1{_ zIS$2v3AteHQ}Bh-7pFQu)>;q8iqzC8Y^hc-e5^C2Eb=3)VThab3(Y*h*pYMuNi;!O zhkRtptK{1~lVp)iCFf_mg&Sy@Eam5Znl7Rs4goH3QSoQ4rtt&u)6KC`}&j19b@V(14u=llWm$FOaEwFC7*}%d7|oavWdj z+Ta0*y^OXoe(TWU-`zQ|==l}DIlN)Y%+pb~wZl<1$(7|mMWUJ9Zt&=p%esq*k}WD) zh&J_{9|o`R!?c--K%1!?s;2Ppb4K^bvgG1_iV8`Xcg4|uRBHU)e9Vx~bH9*#SNQSW z6hA+q4mJ$`sFY@`@I_kBw~G)ceJ@*p<56m%>h0{mIrCsR3h!2~zq2Z~`*NC#@DOZ1 z8R4)^2kI<=7AGI!6vjQ%_+$#Z_+UXLE{<&HWDeY74&dL#HWGG z5U3I~fQ~Y_`m=Tw&y(63@_@@qZQA+MR^g`GnHGrqSWqum=zfb-7iQNRYwHPtRb z+m49kABF@oWG}KVEsSWfz|j9{wP&B^>f98W={xK@S_wXAlQM(0@Sa{6XnIb=_{w`P zRu&sTM~yT~XBiMCxwHX_tBEKH`pV~h+KQk<+d7T7jgH4r0>-5FbB~!I!X#W(17=j! z_1UW@)C_>MxjOrt{|(a)1ruj0ZHV7O@f(Q%wVMW(01*1^-L$5oxW9l^myhYRV3w=) z=ThY)fF9V2$4=h{ylT~7#{*$_qwmR$sM6}67&mid>fhOj}}GS3ko=*4SY!p`b*a7h2sHU5IU()D_PgiyMx?dixu zmku6;6+te9>3b?Dt}5int5<>i2~d*njwC~K?#Zr?J7SWLr_jpu8nJt1!pAnh2`6(p zqWJjypuLKkW~6-DEqjnjQaxO-D6h0@+zmzs(|1XP{&;^xJPiYa-E%B@|A@JQGG)k% z{5-%ae6_Kx5BejrDm#$c*at_;)sCLXYlz)ZdDh9{`rUx6RboJE%xSC;-_uH=>(uRF z;EvhJa~WqrE(WevQ{`dq@(?V*B7h0lKtNFF#DPw!Q#5hMEwZ&vlbig}bZL?2^S$UO z0+W*dPzwymq5(hQ*ExM&;?g_9eZ=~%r2AVGC1O6vj!*ZS8i~l+Wgm3=a(7gAk>8x% zr;Aa*xf6IImjOfMYzJO~Nzaa8-BfMh{}gPFCi?bm>+muW*Wu~!qklC|!Mq_#`)qg- zFazVIw(wuYeq5k$$Ddc5sRMOX40{A{q4}l^NtHtp$9;CYCbUgg!6$r%Zd?NQ`L#aq z=LxYy(6YrEj1(0!=zPRb>=eU*y8am<;J@T04$T5zH4;Ch>8JjL1++3hO3S*lPraxC zH%kK@=Yh#zlPt^uCGl-8pylaw8BF=RZRZKL@$klAxS2uEUb`@UUxF+!wtz8D?uBX( zzY9OVYLq!X)I7{x*G85$IC6UKycx*f=AwJsyOR)$2i?0dr>|&V^JMY%Vbp0v5|W*% z;}8J2`4;BTz5+7jTeRrqRg@^2u^d`>-_X#Hi)*22j%tB?V{qF%kl>dO{ZZ@yJ5D5j zd|*hy!vKGn1OCt&mDLM|IUMxP`&x?BY?|kMuZ3$B+9Y-AebA2tL5VoHww1A}cYubaRV+=j+b*jnz#!m2ecuWGOAQn;P zxM)d$W)7iYbxG~1wz~&79zY3gjF`*F^gS2sB(`w!oE_Nl!2K}-IW=(3y$A)?Z{<4% z9_NRZz3a&F;}@-;{r71`TW`>K?Uwx946c$K^XL@@5gp&;O$h1zDLz*-FOOT8yl)ycpLTzfgnGWK6?cC)%xe>U&(ZV0%4Gb**ceTTjJ zJsDATh35mzL1326qIAEkka6hUwn)a8=M9bfCiD!NrqK8yb*3v61RLs-PcHx`f%XSa z$uv;^%AW&(=Kmhs04C>sJ5Xd+PO=ERVW&1N2f^XXwThnv!JfaoDeMZ01;xc9?acO< z7^^atz!{u>S@&->;8d)9aLgXwAa$!!{^|X>RTZMZq-x%y4=Q!( zx{o~HSzi)FVCDhenF2G~trfQit3tn+)Il>;$>ZsGlOqld9WM&%e+mHOiwdP&dF+28 z&ShScC9>+`yVe-K(uxj$uYR`AgL#a6oM~OVve~y0!$(mqXToinARGEn^cR<6SpZ>+ z>wYJo=u{hbA-ui&y$L#OeZb$H!)y>Y|6?$myo!shfCP{TWP>gb%%X5$Kuk>Rq379_ zzdt-8v^SDyYpyzvw*HUsv_Lvi6lep1lV5`a3=!3JzPz_MROrZKn7C+HJcyv7prHsS zLFS92?%1j5L>W9_3JK2+C844UMMc^}VaV;c^Yw$H3MGLvT1}{HA!gBI{ zltj@W1Q+J#C(Fyr_uI0~PFbcX-r-_ni$8oglZSyBR_(H@mC9iZ*H+^bagYZ=v0Kib z&3v0YQ=zXQgevVsa-Rx$U$cQ&S1$RQS6 zH&}gS_>E43g&zg)uf2I{SrIqXc)|m!qPyFQSVB)jctVe1^Qi8zYvMFHwDT1&q3M2_ z;ArX6hWCU5#JSc=kHh@qS7AoObykyfo~E5EMRMXcB`aH6OD@~}%S&eix%YVl2JZfJ z%0L8xpWeKy{Q-e1EN6K9lqSp{X9MIr6F10eXHya`W)I%FaL1V2TheR@Drb0|ZRIG% zHfcus4I=F=wY+@03s7{+yV{qJJk)Ai@3&o2YZ#K)^qRiAc4NmAGCj#gnf@dXEjqHy zdg0IG7dLC$Ad8meSKcX6knlRXTlJx0hSnD_aD-?%G*WbYEIAqkohS~y^sR%%Mis-1 z%ldkx>bK|9FIm(0=^%A{krgcbHeLeA%E@XQLgycr9`=~O{zZ(9C2Ji#W@C@<7-204 zr*4f$#bO>wQMzuR87bX9Erv;W>Frd=5%vSaGxO8zhZWq>x^BUGd75CgSzAS@y9F7e zHwvm3lhoiZ7e#1OOwO#e5q6i2YUxRKDh-0Ty<>AhUjWWl3H`Vt)Y2YT|CPgxIW~M6 z&$};$ukESSWl8WD-;r&@K^2_(C2F6_0#hTFq{ufj^D^fWhenbl+ z#1lrx{<>Sy|E+ZF!#wQ;Rl@GFwBe+{g;3M$br7N#eW-pb^e0Xf}nht`g zd2F=lOnfg1Ul`l&{^{MvGHbDcfq^=QAL2QMUxKj4xZuXxMDz8bP^w{am*`aP_o(EH zyDRUXR8CmPtOW@Nmj=n9y^K5k=3Q~~(Y=Bvv+|R*Kp57ahvkFu?DP>GBwcLis{Wsc z#laco-@5qI-afx+PTHVrGXBZnP>Y;O^koF*7s>vsuun1S&hDY~~xdN(vp_x!E?4R2G)Q8Od<6yfo2mEBn;($vi=+#1@~S|E8IBhoGKSw7>ZpD!RxalIGvR!;NE0=CYd@MjH^b_DhCh(z`Sa^D0e{St-QoXdLb7P@h9%NABKYi!cIqpm(-r~ny%fx4POdH0- z$AgxHifWC$0-s-*y!`fN9dX`$o(jS}dsC<$e#kToID!ZX%b;2uyvA46;u$hfFn zCmI`aH~+%we7q_JsnkO+e|f_4IT*_U;UT8m}X*M@sLOr~D~R2ZEh+`69`kfV|#al-kIPM ztyY?%*c_y$N&P(2(kZlF>!AtW2p+HwOs9ny6$|9|J=T;&%Me3KYc94CnE187`1lJl zD;!&-A3c_Kt9x~_4Y-E$tl)pCI_JB!k7BkgRW%lCB$k4!;f-{WZX?K!c8EKQXo8Jr z=LBdVB>Q1Uy*oUel1r6Q`wJw-MUq_mfM2to6c?v9UiOMBWS@66c*M9+v$caPEH1+> z@aFcmSoz|BNm#9|#EyhtG}&SN#~W1HSVI1S?t$Uuu=baSIl^VdeVzBnPt_SZo*pBr z5my#?*Srm_@r)sBto=;LjaU<4v_ugrYR@3 zUVzoECVl&his#Acu%*p|yvljBPrVJ|&@FEjQxF|J+Y{dIPB-_Ce||5ARv)WXOy)%s z{HarM)_$4d#@;vn5PxT;S;wxzRzp#el=Jt%A_6uw1QLgjZmS}+z@vuDx}sHkaVC{| zd2A())Pg047CHN_;#tBJ%eO|+(zCO!%~Px6AB2!6SSRGd6_xTl*A1yR1%i^kRr7q% z_Jk%1igyh#AIMiF&4Rgtzcwb;8waJ*M9sHYUym%^o!;(H`&~RuW9OGF;+;Z;ShlKezb6(jE|-(b;-!B*lwK@cpTmMmJ^VVG?kq0T{4ya<+^eub&w08Owi zW~pzj5VnLTF+#()GFDVs-}rWY=wq5-cVqPRRsXv8$&~hl6^2`}+)q^Q^P;Zezsc}W zm9M+isxt}-rUA;bl*_eqVZQN`>mr_==f94cSzk2Y3obOflopMJ-m2F;gB$mc>JBGZ zN7>k+*w~qFy){dZ= zP<}v~+9xmaYCkG0jFP(IVPpe-d9yj!9`Pbdm~p5Opq&34CMT!8mZyWXKBGd(EO^(g zsv5Py2B8Wwo+8J{dr!FavL#9V9WSaf)PX7VjE|**i;9{1Vr0%{%=9bsXUYv7a0ot$hP;1>`2PA0sR$3Tw=c znWkJyhSgLFO$Mp>(ygn#3L(7P2wS2j?69DO1}s7PnB{!Stb)qR3&>p4;)EWDb$c1* z7OR4$o6M7(i&{Qz>~5knb8Yr6eaR>~xTC z-dwG2?PiBYQ#=h{c&`%!^#jj`ytpz$<#d%a&xvd z5n*6<1V5zd&2dpneO}No^R`LgtAWHLdc0U7dF4tEsws>|n3|7Hpx^~G+$N7amdyGz z6Ml?Lx@cE~qL{oH(ZsEHBabIsc#5OT%6X+Tl^PM^BQ3M64n{*R1b+0Xo)af`tCFh6 zXjz_-W6(jK3wXaMCwZD3LBOsKxNFwKy@Z`9YgZP#=C$nztAvs5M>D-qcv6Q`!55Ya|eq0Qa15Y>&t$NHAX(T>k zkJc%v5&n9yMTA3kz4(n7fkHWbf&$AG*o_|9DUydDNq|I;BuO34L__lqa3p)KBhD-1 zP{6>6l&CAEf@*UfUI0`4U60e(albxj-wQA)TR}y0h~dn==)Ub28QgiHKk{U`$+|r5 zqmwk^-)5CCnp%rG&NYPP-PjWJ)Yg)2*rJ9SI1=<-#A`2 zAPvVi4aOpvb+84m_hj_0W{C#TaL1bv*^?+fDVWH$)mcQ8Y|Bql7|PXZr02ik!k!@N z=keUZ8ehN3;fsUvbIrcekNaBSel-u`*( zZ#vm)dD?fMG-wb6Anr#-Ulc2e=F)S!BwFX$^@UNjGN^eiRF|4vtj>3)bD!X&Au8o; z9m!_=+NFz{<6fCyzo8%=xI+$vu9IV&#ZW`)Zg-5SMM@Opc;ND^BdVJ++nKWv&7;kr@CL`VBYjE(LseCwpLUAa zSZ~^P+?BRT?Jjg%c4T8I93s_|yT?Xli9J|RNV%vF!Xj&CPd9Ym#~XSZ7O&4M#}i&| zts$cQ{(K2B`N4V3A(4)uXfjRiO>LxIYY5Jd$5Ndmx(w9Pgk-NCZUr?RV`MwiuCbag zV$jM&nLI$B`ao=?EfZCl-C-f6p)Ksd89w1VMq4Dfg~Q_ufvfP-V0ZNiw>-nZ6_>51 zZ(fIOsr8C3ZfG37I9K|(D|Bs@w^hMCd`{qn6Wsis^isi>i$NAw{_e-GIZ^z(Xo6ep z11}Ev1j3BFg|N&+u&#c#y;AN}s@m|GA3x2YgOq4(p1a>PM>5ot?CR7QJ3b)~?~;+|BpneL+1o<&IvY{{!`Qvb}WWwJb}c zNR0Wd#~TORrAtzEVPvQ?<+8p(vL|(RNvtb#H76(~qK`gikv~pe7wY139Ya~mp9G0{ z*1U}~HaxX)olqQi3n&FJ8)KfIAW2C|y59sj_S_D#Vs}jnEi^e&3tfD33SexnU46bZ zPBAzc^P>LluySJpx!pXV3_LIRTfjEJKYv;cmZ?a<<+%<~JRw=o?EYXJVyMQ5KV_Pk z3tnO}WBVLSKWgo#07W{H5}Z|)kA?(GAlE%d#ZJYh;5u{GVR}{a@pbVoZ?I=k_Gy*+ zaSQB~zCzqdi9TLRCvEhWEWlYOob9MZI<6E&cqU7x-Vd!HHJv1_}x)rM@2{{5&` zoQA`mkpkax4&$TZR}2e2qqbw_aPph+K-;UVph{@vZOb!@U<0`JA+I1wKHE>nq(`-9 zW39|i3;H?LCIOdn!$i$tho3k;P=|(s!5tRVSbQQfS+n%2?uTqx|7asV@<*vhN9ZXc z%aYz+TM=chcnVEIMrFobgHkI<9m05r2O@^Q#a2kw=B`M+oU8`1YuUJ|sx|`FkYtx2 zzDNZ*ZZCnoGD>a$HWyw}>h_2hE5q|9&Wvt7H8Dixk7}kxB9HHgx9PqFoV5u@aQ0~L z>aWMkp#{b3!zU4?bc^Z~{A<2OinTNd_-;aWjM>OfT&6qdyKm`OuFf#`Z)p`@n0EWT zUiq8>3ZBBSm#~%uGe^rA=DYlhX4>JBj&J9!oI6u=nc{GzS(wmqZ*JNQ`9UTIs=2HH zcwbun@IkBJ7fZ;8biA)ZEhnwTu48oyEfh2@s)J;yc*QRp-~5!n0xySS_9gc`!;DtZ zA!E0=wocf^0x!UHXZ)ZgU)r66s=T!cdMs+qJ5}VK6hAl&D3GtucV$ct_>CxoBNUh! zDx1;+;BJbX(%exQSzMZnrWE@|)AN!YJ}DzS`rvl|KKuFw2OWe&*>PCU$P^p?@Z&$z zR)P}))8?j8{z_ibf{U$d*oH$;p&Ij&xvMK`t`fYMfDXca8gJ1~3C^WccGa`ac90F5 zqDvCXIlg-AVxMJHdtC6-Tp;yLG!s)OmAGP}Mt7|U!T9_2MWjOpJw?3%!801@dxZX+ zCw2vNQ320?Gbl}ydaXRhVm#eQv)6K}@%!*|4?T)o&>$6VTp{YAm47w3=yHi9*mPMm zX!}yYyD-Ay@1|6sty5GhB6QE{V-LvFisgo;OV)UVk7cZjdz_{Uz?Hviu=)zO_fq5hILllLIhAH`XLKd4z$Z%bTg9O!+kJG8h z6yyk+i9)}|o^gIw{3K`ZV}^}^Lcvvsjn7b^G4)Zy*4AfbnV41i(5-C})qUt<|pcS5V9q4^Wy z#R3NL2arkc*G#N?IbPsIhPvrQnAgs@TAKLvhax|z%HNio74x#3VH438L<6nVAfnPT zbWp7NJvbyy7=|}A4Dvuy^Vm*+pZ^yZfE5qqr~Je>lqXbkOwR|m)?BX0U%wEQ6V$Bp zVw7?s*Dl!VXn2Bp#8{3oWH-Rf8*x8Vpwv3CBWd8~qxLLAekePZB3@SP;k|$Q!IL|; zj5`;Adw%<^!!9u)%vn-UQvWbe$!zFOMAg=oMaieN|KKCREZgrRChsGUD!N{U<404! zgDCKfzaZDx-(;(X*gc~tNVJQv3=FB7BtnWXNOKLLh_V<- z-_~qHLz1NYkl&zP0_PQrr5}95aMbWY8fqU&+lFQsnN;ee!hT`Qg+hSJGEuT)!0=k6 zcVnFKWzVe)@3)W1H>x`AiIssrnbhSeoOjCAU0Q?b-`dM{1s*)MEm9Mxw*!zw1IX&? z@FbC_7IM4Rsj?jW2kmbx^mQsg+H87O?}%PmT@S&K*EL>0hGI+nU;%k0r7CgL*M4>u z(4t5-LP^W+bH--rro?D;bPxTijwhb^xW^nTC`XHtg^|D%;l*#P6iPW;QAgjqinn4# z6z|A72Q%5KUg$q#9iw``wY_PTb0=2Gm$SEL>-eT+H7K5qPYyfbY{UK2H|?mE&=-%k z3~ZO0>r*>Qn1_Sc(5OnGP^jhP5P^QNc+!PmhX-i!y<~Y=8a-D!z2b5Tk&X+RP1V1dKL%g#l22+jm9Dl{|{Nk@>YObg37rp>jb3iVgM zwB+>hj>J>eZhJAgf`i9(z5)$)l(ir+Y^Hd>-|x2lf=|4n_#xconiKlF{=&>ZB?PO1 z$*x7&m^yU~K|CSKCY21VxC6KC?;wEpz~d+y>VddJcx_9hw!t29?k&NwXqSDg#|sOTd&Gd3q{lcI7t3m6k7ObrmYm)O2FPy=>jcuiIVfNR|=XzM{})cg^@BEBXL=V1t=oCj~M=>b5!}> zeqTEnONk$&dgp6Q@g8?Qaa|E7bW^eNqnI!`nc#>U%-(P>hHU5*!;gzlu*Xi+f)c2Y ziZ&a|KcOtA%_rwrg?mi?LTDKybcQMe;ZZqp0VpK4QccF&9vq|0(ly<>*sXmAjp&Aj zT0Nm_C#)#X`(_y=657{JKZ)redSb(T7e~a4d`&G^Fa9o(#bdBe{u3SlY`%_18gq|? z;s}4SXvWPLpOij-b!ILm{5!06lYzgAvqy4b=+fxkMd!{Xr|MENJWSA&XzYQQX$bK) z?s9i;hJ{>Wi7Z5$9})_>KyL~KLM}R4SI;#)N+OfGLbli8Vr68dU>fqa=S-bz-JQ{G zpSVq=DD*$QDbUiXSQT;$IV%$|FuB8&mpH6oHYY|h$dAVTo7a8Af9~pfMfC=K+r7%Z z91IE;@@w-BTXsF7_67I!J!;}$ozWn!0PsW9>N_WOdlkr9i~<;K0}N!*(qBOR+nvPI zZ6Ro8w@-t9vgwvEy&K#x)6SN-#7TRENi_CV^kH=kr0|KHYw#GRLqUhSi);)kK;1s1 zy%mEL>7w8WAy*0j=+ zvP#U))=8AkS4VE!ro1mz|D?dFP`I|pPl!*)fq`mIaRXQQ&3lBr_HqTg?px`5WU zHRbkiPxq*OkI3n_0spKQK)C+*^&*o+15JNJlTNcXCbshIPIWF9`@?4tl^|6ew!pxF z>I7%U9m0nSGlo3-|H{4!zm6HIzB$o;%Bo534hjEiUOTF?7PrjtyZlXI@6i0G+z-20 z+mB9GJA+W`tUY70tE+am!xiW0-9HcTo@Se#6Ag-Oe{3qj4jVWo9?m6=QL}SbM9g(l{jjcm=O=(Qh-Y&F<~)Fm)oTCATFgHddQz;qWF6ARG9fp)*AmUA{J}lF|kwM!-#{& zx#K6{LyQdB>T`1hpcDE<Oy*5QuF~OG5=rV4E-1twAYHQwhWZua<_2&5|W&_|=*~F4G>Dk70PlYA1 zIcH@tA{U!1(L43fz+jn=b*&Tc@sy&FjvLb@JI#-_U1qy`n>MzY@9q}^L}t6UoA|PO z5Dp@68d2R)R6qxP@rfm`q6c3hF!Yr=3*fqMX~83tV|dOMO-VCjr*=+JhV51W$cfaVWk zd|Tg(xx+C~tMcdNRQz1WvhiM}Ht2z?cj@={fdz2%uPc`==Tyv_1QJCDR{X=5HZRSO zW9`r$6nQzhVmvlR_q-OB?OsMY~PTy?mZq!%=Dn33T$s2+H=nn;w=WhR=?e$ zNUVI1#;2B&k?!TH`S=BPE&3X9RGGx|TmFC|5e!^;Uwgb`wV=z77VW6D5!{!~ebt3* z2ZDqJ{Y_X3EuAORh|Z)UKCcI6L(PkIIw|(_fHa>D2Ilw$PuJ8 zW=(^@a^W!edPp5_@Onv*#!|p}VF8nZoy4_l-1u(#F0x0Ew^LK17%ME`zF{{bI8})C zCI2vq0q<2g#=Bu+b-AtR zXN{peu|hkfDT(?;UDpOg!t$ul{a;7Kx*{fE5#0L1C*@j0`FulLks459IImzh9ZI~U z7#{zR0~ZD2^FtEW76HNbbXZ!}&3UdBou3~;C-dl~yjILF=_AULy+ zeFTlbq>mz=-Mfj!)<$V(>$Jw7n!P-zyWV@)`zA~(Uh|U~mS`^}*H(#HHBUdVKR3&{Lg?*R?z~E=DB^wF zZXYnS&O?NMlEq_0E%?Cik~sVs-N;qnT5+Fx*tYVbv3;1%mr~FySn5Hhu|+T`TMsn( zk@@QIA>~n6tZ(}BwU8&K(m)NgRhZ?I3yhM-TgOv^7yG}c*Vol0z>uNIs{>V(!i@@v ztFC|e31^&dJ>Exp1bQT7WGJEb;#mp{^(`BXER83*9xf~S`}+si>OJ=7bCDv^|NJ(^ zuI*e4Xy%fW`Lu^9so+nMR=S#OvW8^Qw&2VN62=dm3FCr~g&mlp#No?zD=_8>8GPW& zkjbu3dMvQJlC}gdYz<5VLy{^hdH-%zSFm6It6qy!l4|G2?mA_U5mK1myW!kfV9PwC zfWE|G^cuWTu|vrP?_itkBllH|Ad9Flr*GM}#28-rpt8T%SP1L?bv+SLyyv?~wo`}O z8z!_=Xl>)sv7MV};Dab;(XoHcc?gdXs#L^^s;|;22f!^47@taq1EO;ZVkJi`%S+0W zXFtQBU1!_&HiF}Tl2#-Ug5kU~#h5xF*s8NmWGh2|!xcj2eWoVhdB#vq{(>q{;R%LP zLoXq;FGRUeBQl!hWlFc|Nw4)9v4M$=2}wdj=ihteRmcClM{H6F`MtXsPtp%QSP^JO zWD@L+b@HF+3rH<$SB+k}rC@TD?Fg&ZANJ#|$OQ&{*9U&XkEPcTgC-)!9Z_U-ypoKa z7G7VXR}YZSiY#KLX&{@)v73Om2#aq%TFuI20|6cT6n=rkbD~W(0JXoOU=jN6=gyaU z7iT5cVS_k11zx=HP}I;esLxqWlvWTM?L{uAeNt~X{jAsN90IwJLznU!j+-ZYMX&d< zS|*=#qehm^4>P53Wi|!Np{Zo=qzHhVlSofUv-EEcQw#q4f6rkOLC)E05@97KB3O4XCOe+rrvtrf#Q&^Czi=VImfyAA37t8MV_h>0Ec zaPyI+7#i9#8Vh}gSVT`o-{o^tw(+j7-dhp!_}!ck7B zMNq1aJ+6mN-ikT@`m`Ue_!QoK^*VX3=2;NJ_Te?s(DdO*M&p(DH_+YAPyO;x78L|m z*2sVwUJzJ`lyyE0{?fWn=Wn%7p8^8lm2mM*sc>wOeQ3oJeQ$LwulnPtw+rs> zr{6Z+X8$j?-ZHMrE&LXxK|*N|1Yv=Iv`8b}-5mnbEg>!4-AZ>Xx;rG4?rspI1f-?! zTzl{TIrp4=y8&L_4$PRM&?J+<%IF{8p6#R#{ zBmei;>dWQX6M;`go(rEpV~Nn3P#lm~uJc5#om27{vvls!>GroQ>ou7F_Okr zWVynuyK4U$iW#Sl{j==a?q}M^KWZf6y46O(61^Xe4G3K9$?*=RxkR7+jIcL#@XZQJ zFJCmn=BDufGnUc^C|BKcu!i)bQa zN`NrUMhv5>58A@=td7E=hP&1^NPgQJo0x;>cE6$fZT$kDy7$8wO5l`WDwS}KV9e7g43;(u1-_^j-;-@r!rVY?yR^yu zDjNrEa;)Ljx-eI}b#{mP_CFS}n6l4;(Hs3T@HUr6?SB;RfIgA?TkkI^^kv`DZ^2Zr z{ONdrd0#%2JuLH}y3f29o->Q-_ED(1x|-e7`SrzNPN%(psVauf)A5gg0`>FHpO(9A zqy!ApAB`DHIVy*v>3MoRHiy&^NZ` z=d+_lJ3HSn4&on=H`xUd#&0!xhB=;Iq4 zWq?Xv5?XaHiZCwz+f#(^M2JYI2sd!Eldm0&zv^l!bRNVS4iH_5lj?i_YNVZ_W1Oe% z&a);2Jb~Z$uNoOBHD^O59}WmVDOy|4hDAL)=K?c0F*OMX!)+&FB&Np>z72hwwGRFa z0q;~oxyam{XCCiGg=G-Y(9p73R@*k{>sngDwY0Gwf>*T^2k$-ph6lsn=#8c41p6$IVJKn#ROG4}#MzW} z&09IL1BG=nHR?*N!%a2a$INyfk0&PF{0Ph)-!|!#&-CMwl5uXL&Zf}bW~Qe~yzg?u z<+FBqM$GC+{n*ibd-svs*u+JP=!FL_V@3*|OB) za{a>nRo76oZ zlNv(bomoIHGFE#wRBYYqhJNm9`;*G=31s{4SEufpH}7`2+A-5Q{+6qPp|+$`%5_&z)|Q?n=Um8=O-Fegpr$S_RghtwqTE<8##ZuFonef-x&L& zlc01ic=yU6Z)p!e@_h4nnG&BJixa(FgRPWARZH!l(0p{Pcu8gMDIv7KOawnE0VMh2_HG%^Ide@gXpHr69POIC2d zl4mzRB^6ab@MCkNS!A>myAAWbevR75&`@68p}be&`*oF{D@{*GC{}{ku%oG0=NmQ$1wXsl1M&}FEDYxy!ABj&?CYMmKrc0Am zbM-y-Nuk-VF>B_%7i#hg9({^Bd5YZY}zSC=X{TnS9w+{J)XFlVy9XC zTDX)K#p5@NW9i!i{`HHK8uJn>6PNqvkIZqKpK*UqYAv)_{#eyZt?8A+B4N)SN?}n2;jNYcpGUO6{+)FeF&Ok2 z(V1oXlX5&eq-=p*vtCdC9bKVDGvD=~W6~TPw8MbB67#2NF9)Xz>et>sf6tY-;pclC z0c54)`F9wGiAPHN#QXNLfGmMLn=kFVRknHs*G6v;1H1DD{LT54qBl*;w#PxzN?5Ez zMVt3{dglD%oIEE_y29t{LU<(v5x zSXo+@U{k&zuF<}9weYR8HCh8ArxK+0$h_A(Vif|@kFPe~?V2+3;xnDzVxXfV<-D8;bo8b4xhnia3r0q>9Ta zfBv`#Ct@95U_|-k`Ypxyu6~~;_~_q+hJk?>G5$o~iBSw5?OU7iTXi*TFxzMWq+oEj z_paP`cPJjcqT+%cd+dMRIwzB6&V-*mbTyoRNd4|JZ1N!$b{42r!Bpmkm0hV#9hEXM zJFg`Q08I>x-o*O}j2?J~*MC(kjqT^F{Juw#(suhEvzw2TRVQ87d(bb{?1#nf0VB{< zz%zm3qC&ovS?Evo$0DD}@;AZ?a~lVw3V|0_3vTitI@!j;TJ`T+XFATJIimYj?svU~ z1^fD8OzmtO*(vZRicK_usJFU|+7qMKt*1c|0|N=PdmAAy3m-{84{uK+4X6<0JXjk% zxkwEy))aF7gRQ6o<=ua8Tc;=9+uIxT3NkrBHl#kh&{=*crrThX^OTGiZ7%M0dymgl zdojRm)Ox-Yi+dGEL3!1Q4-fK=^y0xcx`7@AkIV%~kOC7!ujGOZ^@ABF4{}I9md0ZE z|7ZcQql_8&pCO^V7;n>d!&;ZGTk%N-8?J56$;ZI06b0Bzgi>i6V9#h0ibq;xj#e$H zP)m-X@KD8b@hdEp<>TgwBbN7oipx$QcN*#S5pTU(edBOr5!0hRf;Hlqea7xJRt9OJ5-*5r7VvSQ@4bWsZqe9e%sz-O-tKMH9<62jk3@oLgOi3U^!Qxxdpjyh23^>zNU z23Q$RjLzn)c)RF!VxUNRCL_%N)S>>9m2-c3KOr!_d=KplJNzK^_XI^U+k7l@nrX94 zT^@&D7rI!Bl-S*lh=5=LIPnFv52}G}9`A!ZsZ4JFoxiB@?TL5XF9$>g?wYrITm*6) z3|jhybM>M9IOh0OL&5sA(q6Arg|vlVU-+&0DD~EdTc~fKPMg~sGQGo{QX04WW~mKn zkJESxw)AQ}As)T_pNom`exppP=#CB&63$etc zqy>3R>#T7-F@wGG`P#DJim7jH8g=Gl zUQVaZM-YW1y;L8_5BWJ;v{wo< zrgYTv9W2>r$2M2Ti{&mwiF-{g$K}d$0)h=wSesulbn{w5y;&PwK$Bv^O zg4Rsy`B_nsU(K^lDu4H7!hl#-XPmVwz3(~k|L*!#K}1!%hoJVVs>S&-9X%1!`;>+g zeEjvy!|K+v$xI2PRaLDDW2f5v6Ko84Dt^^T(whtgsuiL2K$KKEZY71mdsFw0F-FZ5 zGS!YO90z3h|E8b7<$-kct~vv5=tqjxN8?*!+|O-(IKJ33!>a@uT&FzOrm6GPO$eR* z7`@L?@p`}aCnG}w;gwqeKHr`oZ$?#qMLU|Ax85~~j|XTDlyo=d$D2kaPc6BQ>Bmlu z3%05_A1Bo>*y3fj$xr~wDHMX@;@1!SSv|!BoAYos4g|Pwy)1OP90@k-5>N=VUO707 zfQDaL3zO;si970AwD^?>W^#!XnJ{!Fqg=;=-UFU+ln(n>xi&S1Id*hyYr()nMc;AM z2^dsLq}c22nV%)JBRu(|d;e_SZAf9V_>aUGBfay5 z3!H1PT{7dy0PiK#Ov>6T2nR^KL$H6s3-gB(Ng&d&N$QwJ#0g@pd~e_*WdFD+=27v3aOm#N`8~6|!57)E zurU8NIDvpXR~={S*i~c%L~8OtKKZKC38jzt*BtwK5FB`p+c9`fs?L^%h$11MHHoAq zgcAO4;yre$HUH=*L=s)QXrNQg!ZE|`39H@=J4DhF=unHmTlx|E=OOa}Ev< z=Yx14qp1kTs})yOaGea=5%K(sQDR5!>fqqjqK^C@aJW50#+eO&dTvp1^Emh7g?<`e z21`Kt;G9mDo1N->9zVlRh(6;N1KIcZL`0H5@qFs$--%v9D*G9KhZuc@Zp(M@V`ZAQ z*6vyuyrpMmF1!ekF`3GpA1d*z3Tbz457k*C*|=ngc1{f_nxx}p^p)e_CbsyCsS~&D zGNj(f*GIsLz)aEQ$xkG7Ho>H`d;l1AB3eXAV>cX|&-hf?YzULmf4X8vYEtd-lT{CX zjnJ{FRWwyPzE!JyY6t(HTu{kCU3SJN>Pd<{_255kN-pcU6190?wvcK)>!)+4Z$}8F zdwBEQb2P4)7QQf@u<=w`y+7wSQ!^lrsh?$!sgs1fv1;*_-s4E{3{rP`B9baDUGkN; zK8$FT%7bn#Q!cN{5DytuEe2n>ZhF05++V8Jv^h27J@c}9+r->;mO*yR!_`}|^d)@) zW3>GKuaRd+jq$0bre^jV;|QnW7*vKPNHC@JF0g0zYMuOF#aR?C4J8y~u~w~}p}Jtd zU7^D*;h~x%z)WD#Ux(|{BT|(aBF?1ux`_@4*Rwqm8^}Z5U-Z83-zVoQkYUV#_G87) zo+6^yzLQv}AhP-b_rjp$%eQ8j_eTw5dnbZ@#R45VrAjqw;`qTDvbK;Ufg43m@7te< zbzaw}Ry{`YDX6bi-Nm=_xvb5>)$FO;`!I@bA&0faaU1=9r?Oh0UXO{6xhUFaNpb9| zIpF(MvwqTCPiBTomiSi@HBF3EcBpeQgAr00>^QecHs7k4>3z41KAiGl|<)KTeHl2|5;b zpt!4TQ4C!qbX}Mh@l{)J@%k`Txj6I9vCpID(DuAkB=H;nrxoQN)bCU;ginlum|hMP za#+uzbt{x2^U{omNZt3&=i@qSw_tTrlEwfdvk#JOrndg58Y!eLhAxAHx}ww>0Fn#| zKu<2*hTf8CS9n0sk9N|H7d>{-quM)pwf*c*1MAIqxBS|LxpBI8J%A4{NMVYO@TATc%Vh>q+u^=MxWEmOlgeEPq4s zb>6jctjw_KsH>4}oA#&>tZmHn>}#JM7NB%pQ1EriX$=^k%>EPh{04&z?{ZiRzC|{G}z~Zc$6|krW$#>m*z9 zzVkCoP&a{^|2Nyv4x(ZvQ`$3gqoJoEjD6P2SJG%a=19=Op;*}}QT1`{9nCC*huGd% z?LrNfqC2^SJBzu(Ofpe5~r%v|L6CKFWSB1C{DQwz*nLTl#m_f2b z^>}wtPt@_$TGA$##h{JOhQa70G~H{L6_6WY;L?y1*W=Z5pPrcK^z?{D4^?XXpYNKm z$EH2L(U2b(On})Dl=muuda>S`sNQBF9)$hUEKB|&^Y44}+c%Bf5)w*deOy33)tcWN zyi14O6i4Y8g$9Uz(#*z}P4sD*nGV4odp&B4XDco@W}mLCMww|lI;F2VJYt^?A63YN zXHl8cHR#RU%!MxPJVgM=6qWyYh2hYszF}^PF%16lIqiFxFQr}ibUguPOHpe6u{i`D z&{`8Kf`lmC8l_j=j&r4)V6hHGZpfr~!Jot0lrzgexp>ZdIym0fGMX|rxYDmvPIt#1 zxkc7k)VbQ;FZN6FRjJh%!RIzEds_bfy`A%Dr$NtuvzwQgnW>Owo}!!}A-u_HbDDDa zoTB@0wfpyUVnMn@&@;d7O$V1F^HtT!`s3V-@cIl3XZVt9Zh7bgu+<0~z79v4;etNr*U4j*@*|j^!#3DNgMgG)|Pe1nfOFywCPq`A{OR$89SRE6rEr z^6?61=BSaV`)<7z8FI4@I63z7qn4VTZWWGdQ>UDn9I!JcKRQhaRr3r3K7oZ$Q!A>j zOTuvwO6YvPt86u0jHBP~kpv(Yhf+$Mc1GEKrg<>@Gzd^*Ew3JD6w7Fjns>-+ekJCk4t>!5psS^#Fi`Rw zpN!_Qq08|i&AKtXIB_f!D?xoDY`TNP(U0SpEbyanNPg%-q-6oJ3Um% zDYc2UR|vG+1qB18mbi$58isp>EC!4sdKcKgbetS; zF2OW>*y@vu#9>M@4QFEzjsp?AC-CRm<9A3s1Xb*$Os=<*gqu;7n;gxa)twH>vj1L{ zsIzdhc5VI8ytXQ_5pX|exf4@uoM$)##@7DmvKL=nk1g_80rZJ;?fjLb6w*R8&iJK` zT`oP75FZ~+R!wLm}t4k$Z49XF=CjM7b z?PL!e_~K6Xz1Bg-N97*xdVeC7Y6??AJdqB7x(OqCLRKx$%(0}{|oN@;c>xP$x5dS(TJ!O0iH_qr* z^62A|m*Pj~yKpQSeoov@7`fn2bmxMH6<`tm|LT{=0m*Igt=Gb1pVECgq5RGBdks_^ z9>kI4g_TK@6v`Q_d?^*(`!FwF85hrM!EK1nVCFV7wZzVxd3)mC>8a}N(t%Q`ZqMEn zm8Rt`f7EW0q;B!U;JmC0X>V0xNDWF}m<1X?}F-hTdaWD9H zq)$p%)WpU`RC(~pk|z>pfm7opJ}Ktzb0MVjZDpMEyPp>Xb;FG*yWdo1a75yfE65o& z*BiIxqV2Ds!t;=FXoUsHv4#? zJ51(Norz7>0dVH5kN4NR{+JtDj_l+pC|;Y@#Y*PxAK<~kn@dqts;q#qG*T7ZJ3Vx2rr=MDVqHQoGEAGXyfiAhh zPtyi--x+$59m<85LFaxHkfLxGF+IK76=oS+fBeywj8{7C`FM}EZ) zK0Pj~E;Lqz2C&9}9h86m?u7WhkeCl=enD({=8Tty;FEA`oVki}KfcF4apb^&{cL>0Y3((K_c+5l?y?eiYo!^KcQiD;p!)MQ^ z?qHYcbX=VMtfZt@%hVceU$$q1XKb;p)Uvq%2DzVuZqtXBPuNcr*>M3His-d$X(1}l zbi2d!`#Z7^^T6yn9!gA{C4SE*Ib=69%2E_vuB#-K?Il{a^}M6)mzmM?i~(*%2Zj=D z4YSKaK*lN=8fF6yI<`T7X^$o2JNbgwUoQdq<#gH5FH;FXeA7(li1Wi+LCoQu}awUHVv_~N~rhs=-2YWY*WTbYmcjJcR2b4WZd1<$>29|<~ zQ5{d0vuK>+df*FD+U{iDZ|y6lr3`UNJ5B=k3)mEBpJleX0Q!n?Ny6a1Yg;oAC6tS^ zy=p4`)Q-{A%uGc}D%9=huKF69Pr%Lh8bmhO%(IIAnh_l`14dZ^z(Db^n`$?43$xJE z!-ljlv0@A!{TJQ#tXu7Ou4iB7bqdVintaF}uie9S|K_k}>!~sS*Y16ETUvwN%Kqr3Sjkb67+#`F9f=y&b;gyBioO^truE1ZpvO&nshbRyaN+hvK}#pg z_SqacM+|&a{9LMMUBXBUANgcm+X{-o0hT;w+n=xLgnTyL`pYH4 zsvy6@maX!~g(&P4t_BaF$!*596x{KP`z$YXC*i`LKFdxeDZ~Dez^Fdez;&YarL&wT z3_s!3OM?QJ$0zvA1P*WAZ}y7#D^mP+K9PP7m@U&5o!=#`mr5>0otr(`otJ4LD%GrP zi2PY4m^29*61Vf_+3#4k(z~v404Un%RP0~#nSnk6ICA4u{HM{abtL{q=Qvy9Rkpr9 zmKw4cDe-Uy5i=_n5v0SQvPJrmz*rKLa6MGmLJ9rEBM6_2Aiy5Ddh-v7RTH)e=nqkw z;Oql+#NNyTXg>VumbbQX&t9oN-W|_N*BqA4I~AKQ?5}S=hz0#PXZv-u%OJ&&uSeY8 z<&XPC;h?pLNEP1$SJ~?RiHj(zn`Eoh$ya}eT_Eo`4in}gG6AoY7cc(C^27h z=_T3=vBc*S>gdU(<9c6Njr=8l@n{bI^E;DqfbnN2ug4bbV)z&cPytkUK$+{Uh*b`? z&E6`*bhuL`1@xS!*r%9a-WCgFx(&T>Iq;JLIXpqA2a1Tj2F%x}x0O?)FF&Z)tGT%P zi^v)Qmqkv3Uq6vn?I>wR2{ai2En#(RCyYIQkpczH7=D5Vgf1v0X?1ChT>sH9N&?p> z{A)?P6iR;Pk6`O6baKMJ;Ujo+5H z>G#c{674=2Oqv&*#mffZGg5+)kZOK$pv5PK=Z8>a81mya%FcS_=|JuHQbp6I4kDuN z061bJ?VLPCZ_(CL@TfNp#FHiCONMe+>z~OKn{j4N_68XAZ3Xdk_iceYsLp|Pbm|dH zuu#UT8)%G_jE!@17}d$V?G2k#fdD7XpksGeCB#Rv<@?&~r(7o82BnavWPu0${$Uda zQ!5VhUGG`o2G}<1MFxk4YOR|W|MBc@DTvEt{VYA`kXER-OnC?MFFBxmH`jL2o~+&8 zpGb5TVGrjRno0WF-seD(8;b$HB36X@Ctz__Qx;C|pMyQ^@5?W%Zb@a|+xL(~_#UU| z1oWs;E%PBL{r_N{mLf*=74P;cZ3AFQnvWGKLgozrPvFO_85MO{%<~Fzn8QgB>s%#g zz`@_o)NS=2<3Ejj509M%Y)k4vdZ)c^fJepQ{~}l)m7c_?2?%~0ZpX{60roT`1;DA; zH1CI{gdLcGr!7wfbclr^A*4URPt6qh9}<6~yTTs0lL5^HA;~d|>#hJyewmdoG357R z_!rvlihprS$Q+jjM_(7-8Q$JY5VMdCZl6-glZe^{D23gpEevLLx%s$~S&{wqt$FzJ z^`b_$%Uh79#M`uZU5v;*Aou@mS@ef9@@ZL~Kz_DwG-}Bw3^9*aN(8pE^ZY~H$F;LJ zH!!6tn^^cB86Zmn2f~@oL?*wd^BjvE>p#!B0s>Z3+JE8=YH7AE(r+Coi58sw`YD4k zRp)NCg^ZQPiUOemqXa=$0=p1U(uka8-pFvBX@uwcDoAK(5cd7}F%?c!i*KKA9Z&$x z`{q3BNPslC%e9ZO31MWEi-iYb*d~IJjp8V)NALaHtI%Q`w5!D$Jr1bh8%9n0ov`5C$an;uA! z!^9wxXXWel)iEKN9J7EyvmzDf9eFbVIdaz4bRrO6&g zD>j7BEWI>+5|6f7^p~?M*9E}!RG4|jUdXHbu|}oqs@A;6q_L|!4+ut9-P;KU969Kx zvk>k|JI??zm;_R;SCYVtv(%@W-MQQ>eV{c@1&vb(=%>2-{t;GU{-wi>&T)P{z+MV6 zJQ&o0it3UfMQi?*JNGdo#z4Qn%Ox>|(|aBlP5M|wRwKP!c$cfD~K zTnA{Y#fwNN`lBSn(30)N@|WFgOdhTWpS6%`7GRNs zCKV>h$96QC6nSk$EyX_{dwDRYsA*g|=&9wt{h@M&`Nm2S1J$@wf3cTOw|?`0f&QNs zE;@6pK)gqnp<`?!=#{A%FOXNyM8&p731OH6Mmi_x3?>?_)8ojE;sn89LF#Gs4lhQ? z9{6C0;3cT!=Yqk@h_Exu7q0i-V*XEb8eCy=&=Dri*Rr=J14{n= z8H>!we9?LZ;*SrRqo#yPwezebo{xv;^T(U`k+DuG*(+7L&iU}UsIuxi9?YE{z(L(x zR5_YMCvFOC(LK$iE}u9iBMh7OrKoZ}Z;?*9ck(|qo&TEEM4Q}J)|K`n`QBhbemKD_c{(#%Me_Id+b z6&7q&oW}p0#116zfwPcAuby?4h4!FVW^pQh;%%$woTsRY1?DSV>N6|u-$#`Oiyydw5N9SvgH}cv($wxAwIb4}m1@vtctQ1?% zNvLDGV;R*wf%QOQEgwNG^s@k4-c#@Ui#e#V&DP+u1SOyfJu*uNd=5Gpk?hk;$Ym$$lLs-T)q>z=SYhZmRF}lldVQ zb@1C8F$5$XAY|R&UTOYR{s-8xBBY9f*ryS!CtRVR)J=;Cp_4Y6m+Y6QN^#s8l{0(F zT+A=&kedIG7N9?E#0-bc{t#cqR(9qCksZi^cs3Dkz62w!bW%O@sv>n1?@}8Sj>PnJ z#Yzyu+F2dbMeGzRolUvxn4uarD)3g_J#*sZ?^Ft#<|W~BF2^z7gwL1eouCZNfKF9E z3ay?=)9F<9^~b@_9@i6u?E5iM;&^d44R&j$`wpJeE_NC}lxqnd?|~P%cqw_CUd&FO zCP5uR5}@+v7bS+xgO+CDML6&KL2clLtt0DAwm&m2Z| zt*9TYOy)eDVAg`lkWg6t3J~o08yIS_aB3{6O&i?d9lyvPot<*SrMfE2r};S{T_!H) z0bi@f0H=5O=RtU%nfx)(-XhGL#@XNqJUv8YzQpkr81;omq`OG?qJubdn`KZ0j0H%| zR})o+X(TvS`v~PX$FEXrUj@YPtjQPo^yd)?a*IxE_?`b!Eib+($AKChOA(=w;9O2x zMnW;zf%0j*4~#!%3Q073!IDTsz>=`AP`F^{(zH0-7P3O2CMG&tdcpobddGgTZ+@rm zE>YK*ut~2`Nz5n5TMq_>E&>azdd#oJ`SKQ39`jLZb}lkpBU^q*PSwF5B@iq9dOTWo z4}Y4#S8c;gLf8FkWA>ykjcYnXj-&#M86U_j&}yP1*pP%S%Tme3uADXO-26xG*xiNlzUBE58 z?saMN<@a?TN`oF*dx==67hCgQoaK)sHgNPj13GIZGq$m=ycp+Kuvjz$U?|-6s^R@ETceb|_@6@-cK#6dQNovMJ(Xi?ie#<16 zdfT;bau{pYNAncZbvC6dfGd`%KWU%O=~8_ggPpSWFfhh7@yi@`#?E1P?cs5{kcNcx zixdqFGN28fTLmk4mVTI&5P+TCW%;UIKOO)1Bd~%pijWm{j$h zsQ_Lx@uI}P%kA;{DHMK#uJ363F;UgPAQKQocQnP)>&3HgkO?UJDx#y-0>4>DXt7Ab z2YWq%l~N2?DdjL&)`1-mp>Rk{FKs{0Knv&z_vtd0dKt>(`BHdrs}oevZM32ONYYlN z9e6`07+l52ZF%R9!FBnOVjp_YSpF&&7b_( zAwi2%WCrJT7aB3FKZ|6GUw#JGRYl>e^zp8?A?}B`>9&}A-*!u_dj0$p9h|ekjCG*! zkIl+@d4INmA}|5RbI~L3v6shwL&Fh*eTcvnFW#f0+)84!RUxPDnX?IVZ>_Hz?q|5g z8GOFvGRN1<%q#LV@VPSQbtxdVU22e59GO+qH4iuWfkI zE1K}()|140%~pgI6(K8=4(vK3zWe!B&7kdl&mQ}@C51M-(r8Og)8vxa%LkLut_t~Rkux2O*0|nAPm9v}DNZeDa&qz_{-J2G^TDtEu*-!52FJRQU+CeOSW3va7QX4+X~J(d9Pe>M zFJb7*!Z+XcqoR{&(sz#%-1K5svYP~MebWhnIbq2y+}sA0#ubB7h@0U6#>txBiMB@G z%zv6~eB5FMc9f1MDHR0DLlQHp%X%+)mRv>du7Jj`x&-Lg_+I}F>ALhrRYBxC2x1ri}0ZC@n0D)qL>UG$-V-!4WM`1`eH*;^ClML zkoT6DM{jI1fFCY|3hSo=gg0qm_0th4A1kar-Q2of=r^ty3Soe2gH?`pBQE1$kLcZN z?re`~G>8oOdrd|Kbz4i{Vs9wai+#Bhw+IR|&3X(r0n=(qk2(0$V&5n`ffOHUtmg^ zs=FL*<`C+ktelr~nBHA3L`FvD7FakX#J*%aH!MljOQaBEDi_b9SVW3&+;TrCr%=0r zIhj8hmb3s%ZsI(fn*EAXbGuE+KASVAeOXj;=|D-)^lft%uzUP^Q?23R?1(;Ctb2>J zlE17@X6VVw8!F=)t&q}>!QP-*ux>t+D~@3&_LEGWN7A7)3XOAMx#UGVfs^8jG$QI# z>fJ7fe;OvCW7t!_!r8h6Jf+Y@pSePG)w4S zGArq=M$JhH`0p8K5+(l}ow<1@5?_?i1sg&S6j;|?E@{<~c_rAcaB#IOES0vI%Z$M9 zai0CZ1aRtx&FC3O2?HjoRNbo468oUp;FOG(0BT44Il#hsK?2L_9x0qQWRP=Lbl5ZF zJt(Yhy4swLL`NocWw3u*!#Vazf7)Iz?KI%`fSLu^2?+N=RYS0 zXCUAqOE@4|UsRvmGpmS+A&opZ!M)-rWo`>|ZcX<(v=*CB#l7svlB$eV2`ejjd2@67 zzZBX3+B<+OcCGgW)&_{#%~Qzs?JX^V9PrJW1MChLKs2=99J zo1f$9?l)JAUdzpdD^r+eqe-Qm`S@#VUL{3&>`hnSTQopT=C1=0+PgD2tl5^Wp3=I9 zp&Mh-$Awy>8bXh5#~EE#x-b(_u@oi*S|Aw7-*o4LJd2jYKEg!zB~9uyUWrI;vJ*@e zJ#!@hcTMyJ7Sj@eZyk(E`~iO;@m%@{#-;XScMZ_zvSG8mV|?)cov8fUq+pvMupbjY z_WA1MkdOjb;JfnIV}i}EL%Vx=Y;~YkZ;EtZuWEJC7MUqIe@SQeN9lifPckDTI|JAu zoZfc}D(ZW3jt{)CVp0qX7oU(gEb+Izka^ohYxEBPWgy>WpsXeICXci$Y(e3R_~j`9 zA+S1&FM>qUkAW{{fOOMJ2#*%;sqdj0XBE08G;I0bNe3hABH2@yVT-5=hf}Dijy+hY zrR85W?3C4cUQA3IuZ4|@@)wlJ%$XsF{EAMV_R}rrpMS7>fUg9dihlY%jb2EVg%*?s zc(f47RIJqTzyHfWLP7#OH%LS5#T^~lY(1`Xi82eLBq>OKo+a4s{@LgOBJB+ggdb1e z7tA&XB=Qf<0AwL%GS~H&aeqylydHIEM!|MdTqdLlJ@+U&L%IlnO&oV4CItC`+8pnb ziJ4YQkodZ(>(>wYZzVXem4MPi3sw?K>5C=UZArvpAgAd3B)|G1-mk{Gc??o!v?yOzPFfCK(dz7)bYqsyo>LonN;<-kOXx2@VC0u%XZ& zEqn3F`4UpfM+2bgaO-?Ho71X{@BTYWfS)ooFpX*SHN2RwAh|^S2i%9VZx09OmFKL& zdK4M)$nP#VWt-c<)>y{`L;`mJ;rk(QcDG2vVW>0yahT*idA1GHsioYQaN=zfq+s;9 z)hq77;uQgbsYa{T5tq`P^`915dnxYHU$wpB@Z7Q_96yzq!8p_0hdH-sP9KldJy3#$ zSX0TG^UHsvWerEJtUc74>l@S^3?G~w>a92KD)?tyUH#|~!~8x6bZP%j8!SxW;9Y=| zgTnT=fr7s$Rp?h!#zje4*|3=hd9IQUm%T(>&VJl1MR!a=ene<3+O9zp@$Lz1Q24jL zGjtk3d2G+jYM8Jh0PLK)Xs~m1UQ*h<1UttK2|oQ-z_2gb!5P`-Sf=?T0ep|=AlJ{| zUHac#zrLj1%4g2hVq6Z_1UV;0z4G64rYuE-#ujM+a>g#|dHoY8P-!8`Rsnw@Alt_q zZ>F&3_Cf<>-B;z4ki+v)Rcws zaW-3ykV97*6<3*URD}(yj)HF1;40!^zxMwayTQXV&I_Ai0?$>Z?P>W?a@qKhkO|84 z7LMJa)#~4kI&QVnNCxZ-qq1w<>r!tiVXhp!`b6*H0#B3gA7PTs6Zd}^}eP{AU> zk&xHyX+-Y5{B38c@#ID9u(Yjygkw*;R7$`S0fa?wroGGcVI`t74_vj3e(LYS(srxA zUIc4UIKfz3l=Np;Ic#+Q63n$7LbEr{KMo&@?n*Q4-^rwgI2`=%G|fPvw71CaOCg=I zjj1pi>(}=7#ORZcY&FQ1OwGJRs~FEti0l~EF$jOhR5HLsgRnr|zF_iKTwEzI3$urj zArJp!ll2YFXk-*i#Xq@*)izPP80QRGVOWqlWSE@)m}KJ{ZRfo*VSB?V4KOuIi&17* zQrK0z?^FPh!c}(7Iw)kQFyNsZ2U)Rsf_kN$D2;=I^NC5bwIRZlck`+LIFMxHwGdTB ze-gh!(5hVX$w+>z41Ktn>#R8nTBUjU&)`%|96(_8jjci0kvWF8j{h_*8KgZ=0^K*W zZjA`bPYGq7uOkEs8Cno?KK5~wi@+mrq==!5?}VPQH>7w?*{NZOX+b}~Ocw*-WiwxE zQ4Qky2xM<+l?MF67G>##7IaaO5h=20$+Vgh6aYx7EAw$SNP=Q%r@#pAXy?KTS)e?v)wDHF!LQtcV}%)4V{2MCJ-%{hK~F~ zWRXw?eym>Y1 ztyq2jEKp92PkoEB&wq-+IcoHcMth5h;sNIFe*xV6=vei*Nhulc6#(E>$PsR!I;5zG zEat^t0Bntj(sYu){kq`O6&WICJ?t&y1A``i$XX95nG#~)T~kHVUxk6Kt0oMWMwI`R zqRc~S+DC78$oCb46iOhjtJR7~VTvF24kGPT8S|$&1$bHYKyJmoJ=!5cJzPu+S99fc&OThFK$1j62Oo$1N!jmUxUiB_Cs z%I$ZsUOOsZ@ppu=++i92pr`OpB?_@v{Sm>%q@j_}A~$SL#5kPi5WxlAuM4_1!y8h@ zK=VLW&6C2LH!06uUT0cDZ|VC*j%M*ZM9k{N>lmSu#Yoau1?+1tUNb_L8toN}6tfDE z@$xKo16y40oY`!Y#!88vfo5W081HtE+?XyYkMu#=%-hVqF%8&H>OcsZ1F z-HHw_)(CZ0pq*M8-n@jhLR>KI5h>l-Ti72Rv&I3MDJx93!+A zZ|m~Q8!sN0^vf&CZGe0)4ho0llD`&zM7*LE~(unfJl%>YQcC&D>xF8K}Qtgqa3vl)-mAmX|3p;Zw+I zW(MCOzS)zzej%yD2COPEaT9ONr5Wm)z3)t#WRN5x5^A=0auA4^P5mcz&d|sjsi*=f zwB=uf)N~oRNG!WjCiyen9kFmvh@;>Fh$Yf+E<=!{y2gl*lPMTP`I7ia<~x?dh*-e3)nlfmalHjY#-A2dUV(LK!WT8) z3`krix6Au0L>JH=B7S4McV|p{RO)Jv-_Nay zhaXb3y}z8+t$!Zsb;u&4!Wk@|oSy!IfOyCCm_b=U5rNu}1_9Ifi)90k23Vf{ll2&n zyNzbsCC+AhrE;@&OxFzm0(u2O$yZt9WwDh9hAuW`&_aU_?z@7zu#Yov+8@&LC+DcB zsJ2JQrCZuAEY$1UY%FPk=TKP~!NhDhYo9gIK*H!_RAl-`@U~ipn;uC%qU+n~EKZcx zU_M^#stk>{Yc)aSObymuE&u-6V6)#;SYeC#d}ByjQdz0Ft)Eb4trzT6Q7BxocSB`K z_A^y``?&gc@w3yY5@`%gN!QHn)CX_x8P_qH$aWBduBJ0~j4PqLaFa=3ID_@!D?ORsKf#BNriqiX(akk>igt9!NT zjjVbRO8cPtx}Qun)OMnZy5OMj5Y^$#-)9c z&R_YCU`_h}hVXC|BIw_q_RPx-PI zbaZV(-}bu${dM3>;qjK<>|*Ms%Juz`@wTywni@48ja;nYYCVJDE1H8wjlpg%9fl=Y zgKxrcxe;f_Ws~`DbAF)Zc%DqR2ABY75TBY#FB$zJ?pjs+=*6KR7kMHdH=OC$obc1xaQqm<2QX(RuNJ^s& z-J#N3{ zOo6@_TV-=!UdVFlK3HavPS#DUH`&?U)!qtjQB=*_rbav0lT?5lMz?`yF=Wz1vu{hK zataFSI?_CedH1D3xW@3QS)V5(mMQ_O%Q9jLGG|5diZb;0!njo6+9WgHD8ujN9=_JM z?mff)Lq-zFD^U2KtKTznRBZExK8~eXY{~ zh8y;facVZSwx@t4k#FXNV&DDDEsy?62zP!QE~a<=`gO+B7uc_*=baY>efLpS&fv)3 zA12!$r#YV26`2EbG(KiQgX7j|Ml%xEf*Q`b={HiIn|z}wq+hK3AsVZaCWJ2gwd}t# z&*{-hpfud@YxJ6tlNS~_^t1e)!qj}Fb58CD*>An6xa5_6W)LJxFO!y)q1p%7B32cW`eBGiTb7BDK2i?S-`+BnlFWYQ(_HdQy;wThl zYiw-%VZqzW_hGTr${GP;ioNHw7rqt#`|Ivs4+izLr_c5(>7dJudpzkUCz01^K^FxH zEWY%29<8MdQ7pI=-WT32x8|{#X$Ln3mC_OlGaARoOM~Dq8+(ltvSH+)Nr^4}`C5}{ zpYdUr_T_q01|>qrx9>T|CcY}sLAl_V zs2#Qr#ckAoLBEFPXGjO0Zy!E~5J1GUzzOFh>Jk?kJ4ikP*E`uka8&(kiL<`t5u8VF+^Db=UGTzKQ`wC`YFseqe$C;swn2r{Tu91q|v4* zMt4bOIT^7%P@uW8h#`KAvLDrIr@EH;!T76;%0dqi8e`v%7l z=ELNa7C(ZdNE~nz$MUvhuTbi@b4^F) zHw+nDCqRs`KYV{DYDs6n%(El9;VR0(KKuDarf(jvr$NCpuWtOeQ?>D2e*3m?AH-`v zO~x=nngoya30AuiUFzyT75XStfl1|!Bagi*BN^w_#@v-S?Um)hT$J5t$xhdo*^_D` znd=g9pFz;82e%Kry1wt~kg-A1uV)*QK)$+%Hzn_}fsEPO;R;;;<%X;@-3JAB&hpw1 zLry~c)JplJ9BzqDd#dfXr=i&R#MeCPgnIltJX#Cyep>A5>rOJ)#HOEq zi(-pl6A_szmVHjliSOV|41pjz6{ID!bcwY>CWQ$I#+s)G7^xB$M|SeOiLm-3t5+a2BB6XPGXvz3ws z;!ZP;>l)fPwD;%URJvu1 zeKcsD#@2oSB_L;fVxm?wNNP|Im}?;XOfFCY@1oqY8{=X8&@-3RChmB8}LmUO9lD!=lc*6%G+H1F(oZG?6K7pc?ATNHj#yo|)VC{VJ_I!!|3!G;%hdqAW{RbS z)uXq*4^5k3Nr?Ew&^Y;QugC6;BpeiEw;FGe0k*MOQ{pt&=yH!<;xjKB3F1-Ibx(mX z+=Xrw3iUnHmf*%k8v0!f0)Yu}Lf)04DJ)bK*Niu?2XBwuicp9>1-2h zMQrS8mpx(58>XktOHne-`B7?HIMiFt7vDkrsB_iw1{P6Ly^o^%4I)9#Tew}BO(YA<&jEqso$?P79~st!xd<@0;EGFIOhl|~Z!yTw-o zD!3QS?-&UXICDB16maz_$F2%tjc{p@4s}x-Xd1C0;}Qy^Km!*!OK_BM=T9*fSBhTt z%qR?jQ0O@O@AF#Re;g=f`KG{J^Lq0aQK7z3+BT7>$N3%&I@GsL#`zx$mt~qtM*5IAZ7&Z|L(Z^W>tZQ^@;FI|g)BOo)NE zMV^c(#Kqf#EoAB@-E6lorIvO=(I%N0|HJ9ck@mQh)y1GmVYv3Pyr$N(x8)?j zdVY;0lo`3Nn2g!3ckz%-h#N$z_l-t9ij6fFFpU?!Hxm4e+1<6F@`mD|%rCFze@g%MLK0)Um$Ocs;#KwKqNTyzTQ-i2oXL_L% zZ$i7F4NqjghBx+8wp`=ja^52+OxFT(x|e!J(_(`0+GCitT5S zcHB}zzSv@oqi$%u1`!Gtebj@pEKt{_It5YH%mbYl`C~bsfp?LRf>6?@UTa<1{o80- zXMaQFHV%jWkIA(H9V#D0!b@jW8ixZ>IJcSMSQ45KrGXM@$&LFiHX$^x5-Y#L8706* z*7Y_zS7j5Tu}bULY%)n=+I)s(KHIf{)7SbZF0*i(Ay+bq-j;@a(&OhFSkl5S^MdV$ z-CE2Xe@u!v6tsmHaZLLB8O*w0BAL)m{2GV*;neD4;&UCmP9n{ox@zC=#E9 z9h_xs8L&JURE1~S?XG5_=x#SdgmQn`f|KHBr`7yC_11Re@2z`R&1+r_5XTj_gtBr8 zNxtWtSj$!y+HoCs@7ke2`LfW=UlJ2DKeS;7M2|^b8ur{!cSlc8{Nz;wi{H+=x)4>+ z7>38*-QyQ6k+nO%xYq!|#_??HW1HKg^RBmEMYS%*lWQ9vJ59)TX76dKrr@odI?i51 z*@Nyo`+E`(A{yPPXP1HRS}HkKJK4m#Q2qYvm(Qahn2%#p5x>mf&kvnNJqK|(w# z@_zTD4=aZ#hYrnCGx1vTMSe*{! zcXGxv8$I`!uMRD9X%2??-11)$QEXOA-xB+gwws@3=HsgH9_$wk>p+Glrvg9(HlmQ>^$?5dS% z?OWyV88@gaDk;4SpU1Bvsw0>92JT&BoqZg=Mz5SP=t>4_ELHhfdv=q~%;!L|p&bOA zewH!QJ05jk9C8wKm9U#+R0AgT{bN}=&7J!-UF%rMu zA;zTlR{MJ#PCSi6j77m+&m$USuP$~k>P)~EtmQsF0?iC_p22@g2|7+?2|N^8$Nx4y z_~{3Z1zn!rnPYGxKILbAy%K^9Zxz75IL^GY@lN^=oBV+cGdE-7I31&w{&A_9F8t&3 zLWt~VfoTCqdXkdte@F|jJ1r|l+uCA`d@)&}| zsOPz3Z~prCj${thTs=^X&FctAdkJc%g?PTNvo7B*{JJR%Hzh4XtGyccgOV+C4Sk(f?IlNlJtW49aK8I{b~?IOSipyqAVm z))L6czJ^cV+UC%CjYE4hu1c2+i)M+ktn_p{^u_bg~>;kMB&>6uYqZoFTIDEX^ zVzP27Wi$QRRNk*Z~qWTxs6oF)g~JyPy*A-PEJHAC!@&f*xuqWV{9ijV=f8*TyT`hgQQwoYElzlR#VI zLH)9olnmymKQP;Ull=Kg(112`Y2w+L-~MDD++hWisesajD&GA0SrkxYVF<9)O7Td?wXZ8Z(LEkSeOOyDS_Wach*f zEWCbr?s41yN2`7z+g zFqZ(~xlZ(*LhM<+vg+~YeiG7L6q`mHxphvbdzw(v3l>i8hrGkJghP=Dg+L)x^iV0z zTr9fVtsVHysjJ&^v=i)W0x7SSycQ`YAdh}82{hhjri*%D@b*lpIX@AUv9Nz4tm^na zzut5xX)j<^6cG~_cOyP@+v+vLg-3^Yae&`i_IJ(`jd1S@fmv}FeLs-lYASrZ4 zU0Ddu9&Pj_O(;Av0XS%}Ja#K_?$2A!+{N`YcOKsZ`xTR;=oC(LrYSB@Vn#&IkQ*Oz z2hEiHacR$Q=Vpz0%{4J!95XK`@hgEo3`O=b!s(Z%I+SXxM|7`G%GGc3I?3?q=-b4^T-f`$ z)*TMx^2)ntKgVH3+tAQcS8lWo&6&b*bj&^kUH?T7_NUcSVnBrTUMzqQ#=R|K<%-{r zra*xjqa97?TN4i{evJqCd6?Y%tINEzv zU5UdU5}Of)tcIXXN50t_M#`)b*SSx|b8lHOW0J?`%98EsBD38E7a(<0&ItdC;LL!r z4nj%+JBh5j)=ZrTqj#Zd3M&cvkz5~21@*evdDF(t2&|LX>QXRuL z`%|YI0~*7=R(|hoU{)1IX$O*~+HAqIc>h8cLuM$TBL;cf7}bI{Xp=Zlo=$-2BIX_S zKrKa?R>N_~Yxpg?8@r2gndH!=Lrst;${UtQ68@Y|z4lDZhm-0fM$Tbk1aP9joc;yF za~p7JIjNbu^7Hd~1V5U*HT*PiN(Ob>>|JmLTK@v8YqRy8J)yww&s$q1^&2ud7O{0b zigbQ+sm2ZrXfRGFOh>#)d3@lj40iz%u1N!}_@&3|F4DxQm z%lg}2Sc0o9c-Z;XnLIWZ4n0p!u>eP)W7jDn`mBI?WZ*7ga6sE8)6s|Hn-04@hw4Ha ztl*w>ZHb2orqwLZ8Y9u`D47gKN%x?EiV8FP2@v}m#NR=8%UDG5m*A0L_v4w6is6A5 z2?asMDmh-l!4@B`Qop_GxJeZEGcxuW^!5Zd? z&#|FHE#^{J*gI{iXR+f=UJPoug9xlxA4iUR6bq?H;^E~D=>=_x$WP#XYGY1gd&qRS&t_*a!xw%=|ezNGK?qg?R;rz&y|Lpx{y?iDkj<^_X zl-Kj`2S$^nUE!NRa(6o8RK()y^Gt|7ij2cY`zi#NPXa`0E<&{9&<5RP42-q1e>(S- z8~H$A)_r;E{pR6s%Tra|j#2@CNhNuw%x#klTzJH?uV-yMeYKV3Uuv@|mX~2W?l8}%rdg{t5m3lbr2ZX=oY}FuZecl`ELX-0IC&S!b zC>(2~*pL}SKA$sXrD;7qBYL+)#?J9dYYeP$%A{}7p|J#zC!q5aTs|762mu!%l0?#o znNSl5TT>{FM49^2Bh&KUKJYz&#}S%3n!q~jy*zZDMr%?sg(c8fnL`f@emN)g3dZ1n5{sXRe1+(i7_m03zhm<}T&CVq8PMRL(=n~WNe9%FI^IvJl?tjb3bkCRYFkHDRcT=% z^L!tzSa!6;qDA*Cw9DizoBd;GT+D&BzS$+#*4Eu$E8gGi@74o!YtX7bksOyI2r_af z7}0G-cHAHgLN(CO^~)cJo?x@su6i!|K`{dgOauekBB5|%#ti9+KFHRZWv{8=1Hj=T zt@GSAyecZ{p^khxG+kBo!6Li;iB0PV>lwd`NRd>{d@64u@$8LI zxiK#c;=K{S4g}>7p+URuX#5t3P2hmL)LSCEx)jm4-So#2)MT`VJ~i$Wkn`&bfU6Ba z=M4k&O2EEd?^_)b8k*8za**)v&WexmU`7hI9_4|J(?EAzF0DL)5mNpT&I>%v($T)b z(FbAoO3AW;UN*BG1cFF;NbL&uD*sTf>5z@Ksb4k~;Qmmu`oNbg|M5g_Az+A+ zqEc%#my>ZFnmuYh7&>U9r*=}12)+Bmba7Kd2y%maF_@PP3eu10(MkEq5#r=J-029E zA+x-SO7t}xjSCrGMNv$^W*~xqs0D`znJS>)nIV%9`ttVUE1(6Wz`OY5Jbk3Ow+109 zBq$RHNy5zojT4gaI_ST<%I^+NQeD@5uArlnaN_agT>&mV4JPW6;Lw5*!f-N5F;-2| z7Y0$uE2jgyVrV3*ALzbkpv@WkX;a&hVXAMLm&U#=08V5t^|3D}ae)D)8P|>s-e~&| zoRL{kc}GSIqLCLIFo*;QiJd~^fstwD#f7038nmFx*wOZm^Vt2@9QxMrrg4#xcsWCM z?Y+!~NswTo(9qBd9|`?RC)wqWO_NO|5bCuV^==e9+(bD2v*>$Zw0NQtYt)zX=?PEu zL4ckzJk^F37KDF>pIj-^N&^Zy8zTt5Es_vBDuO$uy%BFIuYTp9SP$)1>4+$_L#qjF zpXIuT%-%gZ!0blIXQH`)v;QU3J!gQznaW(ggzwkySs;c{yNBOuE}n)e&(uq$sqt2e zG9-%26JGnJ+HvnBgHZvH|J{c2l34>*HG16$c}DEc9kPTGF+Z=(sX!BU`<}DmRxTVuQzle(oN*jylIq}yhEP=M~VF$D^E>+&UR`-4O@@}zoDTC(6~0I!vE#71+A&fy<%p2nuCU+HmXl$%ZG3D}(v$D$6}tcPJ;DFvFgb&EHRa>> znqS1B;}oD)Cmyst(Uh8>L$iec@fRtRSy7=;P*AW~P*`$JQzEjo@ua{(TKcPgMBAP1 z?d`|a22sQ22QU7YpUO9D!R-Z7Qt!LT0-b@6kB{N$@&HN_>u%~OP(e3A4+;ZyLqj_@ zZYqv{5OisQ|2_lDainEr6dWAZhd@uH#*MY{3ux-gSZB(#@(l?1ry!#uT_R}~{Qm&$ Cm1|c3 diff --git a/layouts/community/ergodox/algernon/keymap.c b/layouts/community/ergodox/algernon/keymap.c deleted file mode 100644 index 0680870954..0000000000 --- a/layouts/community/ergodox/algernon/keymap.c +++ /dev/null @@ -1,1194 +0,0 @@ -/* - * algernon's ErgoDox EZ layout, please see the readme.md file! - */ - -#include -#include QMK_KEYBOARD_H -#include "led.h" -#include "debug.h" -#include "action_layer.h" -#include "action_util.h" -#include "timer.h" -#include "keymap_plover.h" -#include "eeconfig.h" -#include "wait.h" -#include "version.h" -#include "print.h" - -/* Layers */ - -enum { - BASE = 0, - ADORE, - ARRW, - APPSEL, - HUN, - NMDIA, - PLVR, -}; - -/* Macros */ - -enum { - NONE = 0, - // Buttons that do extra stuff - A_GUI, - A_PLVR, - A_MPN, - - // Application select keys - APP_SLK, // Slack - APP_EMCS, // Emacs - APP_TERM, // Terminal - APP_CHRM, // Chrome - APP_MSIC, // Music - APP_SOCL, // Social - APP_PMGR, // Password manager - APP_SCL2, // Social #2 - - // Hungarian layer keys - HU_AACU, // Á - HU_OACU, // Ó - HU_EACU, // É - HU_UACU, // Ú - HU_IACU, // Í - HU_ODIA, // Ö - HU_UDIA, // Ü - HU_ODAC, // Ő - HU_UDAC, // Ű - - // number/symbol keys - A_1, // 1 - A_2, // 2 - A_3, // ... - A_4, - A_5, - A_6, - A_7, - A_8, - A_9, - A_0, - - // Fx - Fx, -}; - -/* Fn keys */ - -enum { - F_BSE = 0, - F_HUN, - F_GUI, -}; - -/* Custom keycodes */ - -enum { - CT_CLN = 0, - CT_TA, - CT_LBP, - CT_RBP, - CT_TMUX, - CT_TPS, - CT_SR, -}; - -/* States & timers */ - -uint16_t gui_timer = 0; - -#if KEYLOGGER_ENABLE -# ifdef AUTOLOG_ENABLE -bool log_enable = true; -# else -bool log_enable = false; -# endif -#endif - -bool time_travel = false; -bool skip_leds = false; - -static uint8_t is_adore = 0; - -/* The Keymap */ - -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - -/* Keymap 0: Base Layer - * - * ,-----------------------------------------------------. ,-----------------------------------------------------. - * | Next/Prev | 9 | 7 @ | 5 * | 3 ^ | 1 $ | F11 | | Fx | 0 % | 2 ! | 4 # | 6 & | 8 | Plover | - * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| - * | ~ | ' | , | . | P | Y | ( | | ) | F | G | C | R | L | \ | - * |-----------+------+------+------+------+------| [ | | ] |------+------+------+------+------+-----------| - * | Tab/ARROW | A | O | E | U | I |------| |------| D | H | T | N | S | = / Arrow | - * |-----------+------+------+------+------+------| tmux | | tmux |------+------+------+------+------+-----------| - * | Play/Pause| / | Q | J | K | X | | | Pane | B | M | W | V | Z | Stop/Reset| - * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' - * | | | | | : | | - | | | | | - * `-----------------------------------' `-----------------------------------' - * ,-------------. ,-------------. - * | LAlt | GUI | | MDIA | Del | - * ,------|------|------| |------+------+------. - * | | | Ctrl | | LEAD | | | - * |Backsp|LShift|------| |------| Enter| Space| - * | | | ESC | | HUN | | | - * `--------------------' `--------------------' - */ -[BASE] = LAYOUT_ergodox( -// left hand - M(A_MPN) ,M(A_9) ,M(A_7) ,M(A_5) ,M(A_3) ,M(A_1) ,KC_F11 -,KC_GRV ,KC_QUOT ,KC_COMM ,KC_DOT ,KC_P ,KC_Y ,TD(CT_LBP) -,TD(CT_TA) ,KC_A ,KC_O ,KC_E ,KC_U ,KC_I -,KC_MPLY ,KC_SLSH ,KC_Q ,KC_J ,KC_K ,KC_X ,TD(CT_TMUX) -,KC_NO ,KC_NO ,KC_NO ,KC_NO ,TD(CT_CLN) - - ,OSM(MOD_LALT),F(F_GUI) - ,OSM(MOD_LCTL) - ,KC_BSPC,OSM(MOD_LSFT),KC_ESC - - // right hand - ,M(Fx) ,M(A_0) ,M(A_2) ,M(A_4) ,M(A_6) ,M(A_8) ,M(A_PLVR) - ,TD(CT_RBP),KC_F ,KC_G ,KC_C ,KC_R ,KC_L ,KC_BSLS - ,KC_D ,KC_H ,KC_T ,KC_N ,KC_S ,KC_EQL - ,TD(CT_TPS),KC_B ,KC_M ,KC_W ,KC_V ,KC_Z ,TD(CT_SR) - ,KC_MINS ,KC_NO ,KC_NO ,KC_NO ,KC_NO - - ,OSL(NMDIA),KC_DEL - ,KC_LEAD - ,F(F_HUN) ,KC_ENT ,KC_SPC - ), - -/* Keymap 1: Adore layer - * - * ,-----------------------------------------------------. ,-----------------------------------------------------. - * | Play/Pause| 9 | 7 @ | 5 * | 3 ^ | 1 $ | F11 | | Fx | 0 % | 2 ! | 4 # | 6 & | 8 | Plover | - * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| - * | \ | X | W | C | H | F | ( | | ) | M | G | L | P | / | `~ | - * |-----------+------+------+------+------+------| [ | | ] |------+------+------+------+------+-----------| - * | Tab/Arrow | A | O | E | I | U |------| |------| D | R | T | N | S | = | - * |-----------+------+------+------+------+------| tmux | | tmux |------+------+------+------+------+-----------| - * | | Z | Q | ' | , | . | | | pane | B | K | V | Y | J | | - * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' - * | | | | | : | | - | | | | | - * `-----------------------------------' `-----------------------------------' - * ,-------------. ,-------------. - * | LAlt | GUI | | MDIA | Del | - * ,------|------|------| |------+------+------. - * | | | Ctrl | | HUN | | | - * |Backsp|LShift|------| |------| Enter| Space| - * | | | ESC | | LEAD | | | - * `--------------------' `--------------------' - */ -[ADORE] = LAYOUT_ergodox( -// left hand - KC_MPLY ,M(A_9) ,M(A_7) ,M(A_5) ,M(A_3) ,M(A_1) ,KC_F11 -,KC_BSLS ,KC_X ,KC_W ,KC_C ,KC_H ,KC_F ,TD(CT_LBP) -,TD(CT_TA) ,KC_A ,KC_O ,KC_E ,KC_I ,KC_U -,KC_NO ,KC_Z ,KC_Q ,KC_QUOT ,KC_COMM ,KC_DOT ,TD(CT_TMUX) -,KC_NO ,KC_NO ,KC_NO ,KC_NO ,TD(CT_CLN) - - ,OSM(MOD_LALT),F(F_GUI) - ,OSM(MOD_LCTL) - ,KC_BSPC,OSM(F_LSFT),KC_ESC - - // right hand - ,M(Fx) ,M(A_0) ,M(A_2) ,M(A_4) ,M(A_6) ,M(A_8) ,M(A_PLVR) - ,TD(CT_RBP),KC_M ,KC_G ,KC_L ,KC_P ,KC_SLSH ,KC_GRV - ,KC_D ,KC_R ,KC_T ,KC_N ,KC_S ,KC_EQL - ,TD(CT_TPS),KC_B ,KC_K ,KC_V ,KC_Y ,KC_J ,KC_NO - ,KC_MINS ,KC_NO ,KC_NO ,KC_NO ,KC_NO - - ,OSL(NMDIA),KC_DEL - ,F(F_HUN) - ,KC_LEAD ,KC_ENT ,KC_SPC - ), - -/* Keymap 2: Arrow layer - * - * ,-----------------------------------------------------. ,-----------------------------------------------------. - * | | | | | | | | | | | | | | | | - * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| - * | | | | | | | | | | | Home | Up | End | | | - * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| - * | | | | | | |------| |------| | Left | Down | Rght | | | - * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| - * | | | | | | | | | | | | | | | | - * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' - * | | | | | | | | | | | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+------. - * | | | | | | | | - * | Enter| |------| |------| PgUp | PgDn | - * | | | | | | | | - * `--------------------' `--------------------' - */ - -[ARRW] = LAYOUT_ergodox( -// left hand - KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS -,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS -,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS -,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS -,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS - - ,KC_TRNS ,KC_TRNS - ,KC_TRNS - ,KC_ENT ,KC_TRNS ,KC_TRNS - - // right hand - ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS - ,KC_TRNS ,KC_TRNS ,KC_HOME ,KC_UP ,KC_END ,KC_TRNS ,KC_TRNS - ,KC_TRNS ,KC_LEFT ,KC_DOWN ,KC_RGHT ,KC_TRNS ,KC_TRNS - ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS - ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS - - ,KC_TRNS ,KC_TRNS - ,KC_TRNS - ,KC_TRNS ,KC_PGUP ,KC_PGDN - ), - -/* Keymap 3: Application select layer - * - * ,-----------------------------------------------------. ,-----------------------------------------------------. - * | |Music |Slack |Emacs |Term |Chrome| | | |Social|PWMgr |Scl2 | | | | - * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| - * | | | | | | | | | | | | | | | | - * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| - * | | | | | | |------| |------| | | | | | | - * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| - * | | | | | | | | | | | | | | | | - * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' - * | | | | | | | | | | | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+------. - * | | | | | | | | - * | | |------| |------| | | - * | | | | | | | | - * `--------------------' `--------------------' - */ - -[APPSEL] = LAYOUT_ergodox( -// left hand - KC_TRNS ,M(APP_MSIC),M(APP_SLK),M(APP_EMCS),M(APP_TERM),M(APP_CHRM),KC_TRNS -,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS -,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS -,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS -,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS - - ,KC_TRNS ,KC_TRNS - ,KC_TRNS - ,KC_TRNS ,KC_TRNS ,KC_TRNS - - // right hand - ,KC_TRNS ,M(APP_SOCL) ,M(APP_PMGR) ,M(APP_SCL2) ,KC_NO ,KC_NO ,KC_TRNS - ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS - ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS - ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS - ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS - - ,KC_TRNS ,KC_TRNS - ,KC_TRNS - ,KC_TRNS ,KC_TRNS ,KC_TRNS - ), - - -/* Keymap 4: Hungarian Layer - * - * ,-----------------------------------------------------. ,-----------------------------------------------------. - * | | | | | | | | | | | | | | | | - * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| - * | | | Ő | | Ű | | | | | | | | | | | - * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| - * | | Á | Ó | É | Ú | Í |------| |------| | | | | | | - * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| - * | | | Ö | | Ü | | | | | | | | | | | - * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' - * | | | | | | | | | | | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+------. - * | | | | | | | | - * | | |------| |------| | | - * | | | | | BASE | | | - * `--------------------' `--------------------' - */ - -[HUN] = LAYOUT_ergodox( -// left hand - KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO -,KC_NO ,KC_NO ,M(HU_ODAC),KC_NO ,M(HU_UDAC),KC_NO ,KC_NO -,KC_NO ,M(HU_AACU),M(HU_OACU) ,M(HU_EACU),M(HU_UACU) ,M(HU_IACU) -,KC_NO ,KC_NO ,M(HU_ODIA) ,KC_NO ,M(HU_UDIA) ,KC_NO ,KC_NO -,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - - ,KC_NO ,KC_NO - ,KC_NO - ,KC_NO ,KC_TRNS ,KC_TRNS - - // right hand - ,KC_TRNS ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - - ,KC_NO ,KC_NO - ,KC_NO - ,F(F_BSE),KC_TRNS ,KC_TRNS - ), - -/* Keymap 5: Navigation & Media layer - * - * ,-----------------------------------------------------. ,-----------------------------------------------------. - * | | F9 | F7 | F5 | F3 | F1 |ScrLCK| | | F10 | F2 | F4 | F6 | F8 | | - * |-----------+------+------+------+------+-------------| |------+------+------+------+------+------+-----------| - * | | | | | | | | | | | | | | | | - * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| - * | | | | | | |------| |------| | | | | | | - * |-----------+------+------+------+------+------| | | |------+------+------+------+------+-----------| - * | | | | | | | | | | | | | | | | - * `-----------+------+------+------+------+-------------' `-------------+------+------+------+------+-----------' - * | | | | | | | | | | | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | Mute | VlUp | | BASE | | - * ,------|------|------| |------+------+------. - * | | | VlDn | | | | | - * | | |------| |------| | | - * | | | | | | | | - * `--------------------' `--------------------' - */ -[NMDIA] = LAYOUT_ergodox( -// left hand - KC_NO ,KC_F9 ,KC_F7 ,KC_F5 ,KC_F3 ,KC_F1 ,LGUI(KC_L) -,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO -,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO -,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO -,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - ,KC_MUTE ,KC_VOLU - ,KC_VOLD - ,KC_NO ,KC_NO ,KC_TRNS - - // right hand - ,KC_TRNS ,KC_F10 ,KC_F2 ,KC_F4 ,KC_F6 ,KC_F8 ,KC_NO - ,KC_NO ,KC_NO ,KC_NO ,KC_UP ,KC_NO ,KC_NO ,KC_NO - ,KC_NO ,KC_LEFT ,KC_DOWN ,KC_RGHT ,KC_NO ,KC_NO - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - ,KC_NO ,KC_NO ,KC_NO ,KC_NO ,KC_NO - - ,KC_TRNS ,KC_NO - ,KC_NO - ,KC_NO ,KC_NO ,KC_NO - ), - -/* Keymap 6: Steno for Plover - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | | | | | | | | | | | | | | | BASE | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | # | # | # | # | # | # | | # | # | # | # | # | # | # | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | | T | P | H | |------| |------| | F | P | L | T | D | - * |--------+ S +------+------+------+ * | * | | * | * +------+------+------+------+--------| - * | | | K | W | R | | | | | | R | B | G | S | Z | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | | | | | | | | | | | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+------. - * | | | | | | | | - * | A | O |------| |------| E | U | - * | | | | | | | | - * `--------------------' `--------------------' - */ - -[PLVR] = LAYOUT_ergodox( -// left hand -KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, -KC_NO, PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_NUM, -KC_NO, PV_LS, PV_LT, PV_LP, PV_LH, PV_STAR, -KC_NO, PV_LS, PV_LK, PV_LW, PV_LR, PV_STAR, PV_STAR, -KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, - KC_NO, - PV_A, PV_O, KC_NO, - - // right hand - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, M(A_PLVR), - PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_NUM, PV_NUM, - PV_STAR, PV_RF, PV_RP, PV_RL, PV_RT, PV_RD, - PV_STAR, PV_STAR, PV_RR, PV_RB, PV_RG, PV_RS, PV_RZ, - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, KC_NO, - KC_NO, - KC_NO,PV_E, PV_U - ), - -}; - -const uint16_t PROGMEM fn_actions[] = { - [F_BSE] = ACTION_LAYER_CLEAR(ON_PRESS) - ,[F_HUN] = ACTION_LAYER_INVERT(HUN, ON_PRESS) - ,[F_GUI] = ACTION_MACRO_TAP(A_GUI) -}; - -static void toggle_steno(int pressed) -{ - uint8_t layer = biton32(layer_state); - - if (pressed) { - if (layer != PLVR) layer_on(PLVR); else layer_off(PLVR); - - register_code(PV_LP); - register_code(PV_LH); - register_code(PV_LR); - register_code(PV_O); - register_code(PV_RL); - register_code(PV_RG); - } else { - unregister_code(PV_LP); - unregister_code(PV_LH); - unregister_code(PV_LR); - unregister_code(PV_O); - unregister_code(PV_RL); - unregister_code(PV_RG); - } -} - -static macro_t *ang_do_hun (keyrecord_t *record, uint16_t accent, uint16_t hun_char) -{ - uint8_t need_shift = 0; - uint8_t hold_shift = 0; - - if (!record->event.pressed) - return MACRO_NONE; - - layer_off (HUN); - - if (keyboard_report->mods & MOD_BIT (KC_LSFT)) { - hold_shift = 1; - need_shift = 1; - unregister_code (KC_LSFT); - } - if ((get_oneshot_mods () & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out ()) { - need_shift = 1; - hold_shift = 0; - unregister_code (KC_LSFT); - } - - clear_oneshot_mods (); - - register_code (KC_RALT); - unregister_code (KC_RALT); - if (accent == (KC_DQT)) { - register_code (KC_RSFT); - } - register_code (accent); - unregister_code (accent); - if (need_shift && accent != (KC_DQT)) { - register_code (KC_RSFT); - } else if (accent == (KC_DQT) && !need_shift) { - unregister_code (KC_RSFT); - } - register_code (hun_char); - unregister_code (hun_char); - if (need_shift || accent == (KC_DQT)) - unregister_code (KC_RSFT); - if (hold_shift) - register_code (KC_LSFT); - - return MACRO_NONE; -} - -static void ang_handle_num_row(uint8_t id, keyrecord_t *record) { - uint8_t idx = id - A_1; - uint8_t kc; - static bool shifted[10]; - - if (keyboard_report->mods & MOD_BIT(KC_LSFT) || - ((get_oneshot_mods() & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out())) { - if (record->event.pressed) - shifted[idx] = true; - } - - if (!shifted[idx]) { - kc = idx + KC_1; - } else { - switch (id) { - case A_8: - case A_9: - shifted[idx] = false; - return; - - case A_7: - kc = KC_2; - break; - case A_5: - kc = KC_8; - break; - case A_3: - kc = KC_4; - break; - case A_1: - kc = KC_6; - break; - - case A_0: - kc = KC_5; - break; - case A_2: - kc = KC_1; - break; - case A_4: - kc = KC_3; - break; - case A_6: - kc = KC_7; - break; - } - } - - if (record->event.pressed) { - register_code (kc); - } else { - unregister_code (kc); - shifted[idx] = false; - } -} - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - switch(id) { - case A_MPN: - if (record->event.pressed) { - if (keyboard_report->mods & MOD_BIT(KC_LSFT) || - ((get_oneshot_mods() & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out())) { - int oneshot = ((get_oneshot_mods() & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out()); - - if (oneshot) - clear_oneshot_mods (); - unregister_code (KC_LSFT); - - register_code (KC_MPRV); - unregister_code (KC_MPRV); - - if (!oneshot) - register_code (KC_LSFT); - } else { - return MACRO (T(MNXT), END); - } - } - break; - - /* Hungarian layer */ - case HU_AACU: - return ang_do_hun (record, KC_QUOT, KC_A); - case HU_OACU: - return ang_do_hun (record, KC_QUOT, KC_O); - case HU_EACU: - return ang_do_hun (record, KC_QUOT, KC_E); - case HU_UACU: - return ang_do_hun (record, KC_QUOT, KC_U); - case HU_IACU: - return ang_do_hun (record, KC_QUOT, KC_I); - case HU_ODIA: - return ang_do_hun (record, KC_DQT, KC_O); - case HU_UDIA: - return ang_do_hun (record, KC_DQT, KC_U); - case HU_ODAC: - return ang_do_hun (record, KC_EQL, KC_O); - case HU_UDAC: - return ang_do_hun (record, KC_EQL, KC_U); - - /* Plover base */ - case A_PLVR: - toggle_steno(record->event.pressed); - break; - - /* Fx */ - case Fx: - if (record->event.pressed) { - set_oneshot_mods (MOD_LALT); - layer_on (NMDIA); - set_oneshot_layer (NMDIA, ONESHOT_START); - } else { - clear_oneshot_layer_state (ONESHOT_PRESSED); - } - break; - - /* GUI & AppSel */ - case A_GUI: - if (record->event.pressed) { - register_code (KC_LGUI); - if (record->tap.count && !record->tap.interrupted) { - if (record->tap.count == 2) { - uprintf("CMD:appsel_start\n"); - layer_on (APPSEL); - set_oneshot_layer (APPSEL, ONESHOT_START); - } else if (record->tap.count >= 3) { - uprintf("CMD:appsel_helper\n"); - layer_off (APPSEL); - clear_oneshot_layer_state (ONESHOT_PRESSED); - } - } else { - record->tap.count = 0; - } - gui_timer = 0; - } else { - if (record->tap.count >= 2) - { - clear_oneshot_layer_state (ONESHOT_PRESSED); - } - gui_timer = timer_read (); - } - break; - - case APP_SLK: - if (record->event.pressed) - uprintf("CMD:appsel_slack\n"); - break; - - case APP_EMCS: - if (record->event.pressed) - uprintf("CMD:appsel_emacs\n"); - break; - - case APP_TERM: - if (record->event.pressed) - uprintf("CMD:appsel_term\n"); - break; - - case APP_CHRM: - if (record->event.pressed) - uprintf("CMD:appsel_chrome\n"); - break; - - case APP_MSIC: - if (record->event.pressed) - uprintf("CMD:appsel_music\n"); - break; - - case APP_SOCL: - if (record->event.pressed) - uprintf("CMD:appsel_social\n"); - break; - - case APP_PMGR: - if (record->event.pressed) - uprintf("CMD:appsel_pwmgr\n"); - break; - - case APP_SCL2: - if (record->event.pressed) - uprintf("CMD:appsel_social2\n"); - break; - - // number row and symbols - case A_1 ... A_0: - ang_handle_num_row(id, record); - break; - } - - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - uint8_t dl; - - set_unicode_input_mode(UC_LNX); - - ergodox_led_all_on(); - for (int i = LED_BRIGHTNESS_HI; i > LED_BRIGHTNESS_LO; i--) { - ergodox_led_all_set (i); - wait_ms (5); - } - wait_ms(1000); - for (int i = LED_BRIGHTNESS_LO; i > 0; i--) { - ergodox_led_all_set (i); - wait_ms (10); - } - ergodox_led_all_off(); - - if (!eeconfig_is_enabled()) - eeconfig_init(); - dl = eeconfig_read_default_layer (); - if (dl == (1UL << ADORE)) { - is_adore = 1; - } -}; - -LEADER_EXTERNS(); - -static void ang_tap (uint16_t code, ...) { - uint16_t kc = code; - va_list ap; - - va_start(ap, code); - - do { - register_code16(kc); - unregister_code16(kc); - wait_ms(50); - kc = va_arg(ap, int); - } while (kc != 0); - va_end(ap); -} - -#define TAP_ONCE(code) \ - register_code (code); \ - unregister_code (code) - -typedef struct { - bool layer_toggle; - bool sticky; -} td_ta_state_t; - -static void ang_tap_dance_ta_finished (qk_tap_dance_state_t *state, void *user_data) { - td_ta_state_t *td_ta = (td_ta_state_t *) user_data; - - if (td_ta->sticky) { - td_ta->sticky = false; - td_ta->layer_toggle = false; - layer_off (ARRW); - return; - } - - if (state->count == 1 && !state->pressed) { - register_code (KC_TAB); - td_ta->sticky = false; - td_ta->layer_toggle = false; - } else { - td_ta->layer_toggle = true; - layer_on (ARRW); - td_ta->sticky = (state->count == 2); - } -} - -static void ang_tap_dance_ta_reset (qk_tap_dance_state_t *state, void *user_data) { - td_ta_state_t *td_ta = (td_ta_state_t *) user_data; - - if (!td_ta->layer_toggle) - unregister_code (KC_TAB); - if (!td_ta->sticky) - layer_off (ARRW); -} - -static void ang_tap_dance_tmux_finished (qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - register_code(KC_LALT); - register_code(KC_SPC); - unregister_code(KC_SPC); - unregister_code(KC_LALT); - } else { - register_code(KC_LCTL); - register_code(KC_A); - unregister_code(KC_A); - unregister_code(KC_LCTL); - } -} - -static void ang_tap_dance_tmux_pane_select (qk_tap_dance_state_t *state, void *user_data) { - uint8_t kc = KC_P; - - if (state->count >= 2) { - kc = KC_Z; - } - - register_code(KC_LALT); - register_code(KC_SPC); - unregister_code(KC_SPC); - unregister_code(KC_LALT); - - register_code(kc); - unregister_code(kc); -} - -static void -_td_sr_each (qk_tap_dance_state_t *state, void *user_data) { - skip_leds = true; - - switch (state->count) { - case 1: - ergodox_right_led_3_on (); - break; - case 2: - ergodox_right_led_2_on (); - break; - case 3: - ergodox_right_led_1_on (); - break; - case 4: - ergodox_right_led_3_off (); - wait_ms (50); - ergodox_right_led_2_off (); - wait_ms (50); - ergodox_right_led_1_off (); - break; - } -} - -static void -_td_sr_finished (qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - register_code (KC_MSTP); - } - if (state->count >= 4) { - uprintf("CMD:reflash\n"); - wait_ms (1000); - reset_keyboard (); - reset_tap_dance (state); - } -} - -static void -_td_sr_reset (qk_tap_dance_state_t *state, void *user_data) { - ergodox_right_led_1_off (); - wait_ms (50); - ergodox_right_led_2_off (); - wait_ms (50); - ergodox_right_led_3_off (); - - if (state->count == 1) { - unregister_code (KC_MSTP); - } -} - -static void -_td_brackets_finished (qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - if (state->keycode == TD(CT_LBP)) - register_code16 (KC_LBRC); - else - register_code16 (KC_RBRC); - } else if (state->count == 2) { - if (state->keycode == TD(CT_LBP)) - register_code16 (KC_LPRN); - else - register_code16 (KC_RPRN); - } else if (state->count == 3) { - unicode_input_start(); - - if (state->keycode == TD(CT_LBP)) - register_hex (0x300c); - else - register_hex (0x300d); - - unicode_input_finish(); - } -} - -static void -_td_brackets_reset (qk_tap_dance_state_t *state, void *user_data) { - if (state->count == 1) { - if (state->keycode == TD(CT_LBP)) - unregister_code16 (KC_LBRC); - else - unregister_code16 (KC_RBRC); - } else if (state->count == 2) { - if (state->keycode == TD(CT_LBP)) - unregister_code16 (KC_LPRN); - else - unregister_code16 (KC_RPRN); - } -} - -qk_tap_dance_action_t tap_dance_actions[] = { - [CT_CLN] = ACTION_TAP_DANCE_DOUBLE (KC_COLN, KC_SCLN) - ,[CT_TA] = { - .fn = { NULL, ang_tap_dance_ta_finished, ang_tap_dance_ta_reset }, - .user_data = (void *)&((td_ta_state_t) { false, false }) - } - ,[CT_LBP] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, _td_brackets_finished, _td_brackets_reset) - ,[CT_RBP] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, _td_brackets_finished, _td_brackets_reset) - ,[CT_TMUX]= ACTION_TAP_DANCE_FN (ang_tap_dance_tmux_finished) - ,[CT_TPS] = ACTION_TAP_DANCE_FN (ang_tap_dance_tmux_pane_select) - ,[CT_SR] = ACTION_TAP_DANCE_FN_ADVANCED (_td_sr_each, _td_sr_finished, _td_sr_reset) -}; - -// Runs constantly in the background, in a loop. -void matrix_scan_user(void) { - uint8_t layer = biton32(layer_state); - bool is_arrow = false; - - if (gui_timer && timer_elapsed (gui_timer) > TAPPING_TERM) - unregister_code (KC_LGUI); - - if (!skip_leds) { - if (layer == HUN) { - ergodox_right_led_2_on(); - ergodox_right_led_3_on(); - } else if (layer == NMDIA) { - ergodox_right_led_1_on(); - ergodox_right_led_2_on(); - } else if (layer == PLVR) { - ergodox_right_led_1_on (); - ergodox_right_led_2_on (); - ergodox_right_led_3_on (); - } else if (layer == ADORE) { - ergodox_right_led_1_on (); - ergodox_right_led_2_on (); - ergodox_right_led_3_on (); - - ergodox_right_led_2_set (LED_BRIGHTNESS_HI); - } - } - - if (layer_state & (1UL << ARRW)) { - if (!skip_leds) { - ergodox_right_led_1_on (); - ergodox_right_led_3_on (); - } - is_arrow = true; - } - - if (!skip_leds) { - if (keyboard_report->mods & MOD_BIT(KC_LSFT) || - ((get_oneshot_mods() & MOD_BIT(KC_LSFT)) && !has_oneshot_mods_timed_out())) { - ergodox_right_led_1_set (LED_BRIGHTNESS_HI); - ergodox_right_led_1_on (); - } else { - ergodox_right_led_1_set (LED_BRIGHTNESS_LO); - if (layer != NMDIA && layer != PLVR && layer != ADORE && !is_arrow) - ergodox_right_led_1_off (); - } - - if (keyboard_report->mods & MOD_BIT(KC_LALT) || - ((get_oneshot_mods() & MOD_BIT(KC_LALT)) && !has_oneshot_mods_timed_out())) { - ergodox_right_led_2_set (LED_BRIGHTNESS_HI); - ergodox_right_led_2_on (); - } else { - ergodox_right_led_2_set (LED_BRIGHTNESS_LO); - if (layer != HUN && layer != NMDIA && layer != PLVR && layer != ADORE) - ergodox_right_led_2_off (); - } - - if (keyboard_report->mods & MOD_BIT(KC_LCTRL) || - ((get_oneshot_mods() & MOD_BIT(KC_LCTRL)) && !has_oneshot_mods_timed_out())) { - ergodox_right_led_3_set (LED_BRIGHTNESS_HI); - ergodox_right_led_3_on (); - } else { - ergodox_right_led_3_set (LED_BRIGHTNESS_LO); - if (layer != HUN && layer != PLVR && layer != ADORE && !is_arrow) - ergodox_right_led_3_off (); - } - } - - LEADER_DICTIONARY() { - leading = false; - leader_end (); - - SEQ_ONE_KEY (KC_C) { - ang_tap (LSFT(KC_C), KC_S, KC_I, KC_L, KC_L, KC_RALT, KC_QUOT, KC_A, KC_M, KC_A, KC_S, - KC_S, KC_Z, KC_O, KC_N, KC_Y, KC_K, KC_RALT, KC_QUOT, KC_A, KC_M, 0); - } - - SEQ_ONE_KEY (KC_K) { - ang_tap (KC_SPC, LSFT(KC_7), KC_SPC, 0); - register_code(KC_LCTL); - register_code(KC_LSFT); - register_code(KC_U); - unregister_code(KC_U); - unregister_code(KC_LSFT); - unregister_code(KC_LCTL); - ang_tap (KC_1, KC_F, KC_4, KC_7, KC_6, 0); - register_code (KC_ENT); - unregister_code (KC_ENT); - ang_tap (KC_END, 0); - register_code(KC_LCTL); - register_code(KC_LSFT); - register_code(KC_U); - unregister_code(KC_U); - unregister_code(KC_LSFT); - unregister_code(KC_LCTL); - ang_tap (KC_1, KC_F, KC_4, KC_7, KC_6, 0); - register_code (KC_SPC); - unregister_code (KC_SPC); - } - - SEQ_ONE_KEY (KC_G) { - ang_tap (LSFT(KC_G), KC_E, KC_J, KC_G, KC_RALT, KC_EQL, KC_O, - KC_RALT, KC_EQL, KC_O, - KC_RALT, KC_EQL, KC_O, 0); - } - -#if KEYLOGGER_ENABLE - SEQ_ONE_KEY (KC_D) { - ergodox_led_all_on(); - wait_ms(100); - ergodox_led_all_off(); - log_enable = !log_enable; - } -#endif - - SEQ_ONE_KEY (KC_R) { - ang_tap(KC_RALT, 0); - } - - SEQ_ONE_KEY (KC_T) { - time_travel = !time_travel; - } - - SEQ_ONE_KEY (KC_U) { - qk_ucis_start(); - } - - SEQ_ONE_KEY (KC_V) { - SEND_STRING (QMK_KEYBOARD "/" QMK_KEYMAP " @ (" QMK_VERSION "/" LAYOUT_ergodox_VERSION ")"); - } - - SEQ_ONE_KEY (KC_L) { - /* λ */ - unicode_input_start(); - register_hex(0x03bb); - unicode_input_finish(); - } - - SEQ_ONE_KEY (KC_Y) { - ang_tap (KC_BSLS, KC_O, KC_SLSH, 0); - } - - SEQ_ONE_KEY (KC_S) { - unicode_input_start(); register_hex(0xaf); unicode_input_finish(); - TAP_ONCE (KC_BSLS); - register_code (KC_RSFT); TAP_ONCE (KC_MINS); TAP_ONCE (KC_9); unregister_code (KC_RSFT); - unicode_input_start (); register_hex(0x30c4); unicode_input_finish(); - register_code (KC_RSFT); TAP_ONCE (KC_0); TAP_ONCE (KC_MINS); unregister_code (KC_RSFT); - TAP_ONCE (KC_SLSH); - unicode_input_start (); register_hex(0xaf); unicode_input_finish(); - } - - SEQ_TWO_KEYS (KC_W, KC_M) { - uprintf("CMD:wm\n"); - } - - SEQ_ONE_KEY (KC_A) { - if (is_adore == 0) { - default_layer_and (0); - default_layer_or ((1UL << ADORE)); - eeconfig_update_default_layer ((1UL << ADORE)); - is_adore = 1; - - ergodox_led_all_off (); - ergodox_right_led_3_on (); - wait_ms (100); - ergodox_right_led_2_on (); - wait_ms (100); - ergodox_right_led_3_off (); - ergodox_right_led_1_on (); - wait_ms (100); - ergodox_right_led_2_off (); - wait_ms (100); - ergodox_right_led_1_off (); - } else { - is_adore = 0; - default_layer_and (0); - default_layer_or (1UL << BASE); - eeconfig_update_default_layer ((1UL << BASE)); - - ergodox_led_all_off (); - ergodox_right_led_1_on (); - wait_ms (100); - ergodox_right_led_2_on (); - wait_ms (100); - ergodox_right_led_1_off (); - ergodox_right_led_3_on (); - wait_ms (100); - ergodox_right_led_2_off (); - wait_ms (100); - ergodox_right_led_3_off (); - } - } - } -} - -static uint16_t last4[4]; - -const qk_ucis_symbol_t ucis_symbol_table[] = UCIS_TABLE -( - UCIS_SYM("poop", 0x1f4a9), - UCIS_SYM("rofl", 0x1f923), - UCIS_SYM("kiss", 0x1f619), - UCIS_SYM("snowman", 0x2603), - UCIS_SYM("coffee", 0x2615), - UCIS_SYM("heart", 0x2764), - UCIS_SYM("bolt", 0x26a1), - UCIS_SYM("pi", 0x03c0), - UCIS_SYM("mouse", 0x1f401), - UCIS_SYM("micro", 0x00b5), - UCIS_SYM("tm", 0x2122), - UCIS_SYM("child", 0x1f476), - UCIS_SYM("family", 0x1F46A), - UCIS_SYM("joy", 0x1F602) -); - -bool process_record_user (uint16_t keycode, keyrecord_t *record) { -#if KEYLOGGER_ENABLE - if (log_enable) { - uint8_t layer = biton32(layer_state); - - if ((layer == ADORE) || (layer == BASE)) - uprintf ("KL: col=%02d, row=%02d, pressed=%d, layer=%s\n", record->event.key.col, - record->event.key.row, record->event.pressed, (is_adore) ? "ADORE" : "Dvorak"); - } -#endif - - if (keycode == KC_ESC && record->event.pressed) { - bool queue = true; - - if ((get_oneshot_mods ()) && !has_oneshot_mods_timed_out ()) { - clear_oneshot_mods (); - queue = false; - } - if (layer_state & (1UL<event.pressed) { - uint8_t p; - - // shift cache one to the left - for (p = 0; p < 3; p++) { - last4[p] = last4[p + 1]; - } - last4[3] = keycode; - - if (last4[0] == KC_D && last4[1] == KC_A && last4[2] == KC_T && last4[3] == KC_E) { - ang_tap (KC_E, KC_SPC, KC_MINS, KC_D, KC_SPC, KC_QUOT, 0); - register_code (KC_RSFT); - register_code (KC_EQL); - unregister_code (KC_EQL); - unregister_code (KC_RSFT); - - ang_tap (KC_4, KC_SPC, KC_D, KC_A, KC_Y, KC_S, KC_QUOT, 0); - - return false; - } - } - - return true; -} - -void qk_ucis_symbol_fallback (void) { - for (uint8_t i = 0; i < qk_ucis_state.count - 1; i++) { - uint8_t code; - - if ((qk_ucis_state.codes[i] >= M(A_1)) && (qk_ucis_state.codes[i] <= M(A_0))) - code = qk_ucis_state.codes[i] - M(A_1) + KC_1; - else - code = qk_ucis_state.codes[i]; - register_code(code); - unregister_code(code); - wait_ms (10); - } -} diff --git a/layouts/community/ergodox/algernon/readme.md b/layouts/community/ergodox/algernon/readme.md deleted file mode 100644 index a25018a7bc..0000000000 --- a/layouts/community/ergodox/algernon/readme.md +++ /dev/null @@ -1,152 +0,0 @@ - - -algernon's layout -======================= - -This is the layout I used to use on my [ErgoDox EZ][ez], while I was using [QMK][qmk]. I no longer do so, and this repository is obsolete, and not updated anymore. My current firmware is based on [Kaleidoscope][kaleidoscope], and is located [elsewhere][ergodox-sketch]. I'm keeping the repo around for historical and educational purposes. - - [kaleidoscope]: https://github.com/keyboardio/Kaleidoscope - [ergodox-sketch]: https://git.madhouse-project.org/algernon/ErgoDox-sketch - -Nevertheless, this is an unconventional layout for the [ErgoDox EZ][ez]. For more details about the history of the layout, see my [blog posts about my ErgoDox journey][blog-ergodox]. - - [ez]: https://ergodox-ez.com/ - [blog-ergodox]: https://asylum.madhouse-project.org/blog/tags/ergodox/ - -Some of the things in the layout only work when one uses [Spacemacs][spacemacs] and [GNOME][gnome] under Linux. Your mileage may vary. - - [spacemacs]: http://spacemacs.org/ - [gnome]: https://www.gnome.org/ - -## Table of Contents - -* [Layouts](#layouts) - - [Base layer](#base-layer) - - [ADORE layer](#adore-layer) - - [Steno layer](#steno-layer) - - [LED states](#led-states) -* [Tools](#tools) - - [Heatmap](#heatmap) - - [Layer notification](#layer-notification) -* [Special features](#special-features) - - [Unicode Symbol Input](#unicode-symbol-input) -* [Building](#building) - - [Using on Windows](#using-on-windows) -* [Changelog](https://github.com/algernon/ergodox-layout/blob/master/NEWS.md#readme) -* [License](#license) - -# Layouts - -## Base layer - -[![Base layer](https://github.com/algernon/ergodox-layout/raw/master/images/base-layer.png)](http://www.keyboard-layout-editor.com/#/gists/28f7eb305fdbff943613e1dc7aa9e82b) - -At its core, this is a Dvorak layout, with some minor changes. The more interesting parts are how certain keys behave: - -* The number row is the same as in the [ADORE](#adore-layer) layer. The function keys are on the **Media** layer. -* The `Shift`, `Alt`, and `Control` modifiers are one-shot. When tapped, they are considered active for the next key press only. When double tapped, they toggle on, until a third, single tap sometime later. When held, they act as expected. My usual pattern is that I use these for the next keypress only, so this behaviour is perfect. If I need them held, I'll just double-tap. -* The `GUI` key is special, because while a single tap works as usual, when double-tapped, it turns the number row into an application selector, and when triple tapped, it runs an application selector program on the host. -* The `ESC` key also doubles as a one-shot cancel key: if tapped while any of the one-shot modifiers are in-flight (as in, single-tapped, and not expired yet), it cancels all one-shot modifiers. It also cancels the **Hun** layer, if active. Otherwise it sends the usual keycode. -* The **Media** and **Hun** layer keys are one-shot, the **STENO** key is a toggle. -* The **Fx** key is one-shot, and activates the **Media** layer, along with a one-shot `Alt`. -* When holding the `Tab`/**Arrow** key, the arrow layer activates while the key is held. Tapping the key produces the normal, `Tab` key. Double-tapping it toggles the **Arrow** layer on until a third tap. -* Tapping the `:` key once yields `:`, tapping it twice yields `;`. -* Tapping the `[{(`/`)}]` keys once yields `[` (or `{` when shifted), tapping them twice yields `(`. -* The **Lead** key allows me to type in a sequence of keys, and trigger some actions: - - `LEAD l` uses the unicode input method to enter a `λ`. - - `LEAD s` does a lot of magic to type in a shruggie: `¯\_(ツ)_/¯` - - `LEAD y` types `\o/`. - - `LEAD w m` maximises the currently focused window. - - `LEAD a` makes the [ADORE layer](#adore-layer) the default. - - `LEAD v` prints the firmware version, the keyboard and the keymap. - - `LEAD d` toggles logging keypress positions to the HID console. - - `LEAD t` toggles time travel. Figuring out the current `date` is left as an exercise to the reader. - - `LEAD u` enters the [Unicode symbol input](#unicode-symbol-input) mode. - - `LEAD r` inputs `Right Alt`, which is the `Compose` key of my choice. - -The symbols on the front in the image above have the same color as the key that activates them, with the exception of the **Arrow** layer, which is just black on the front. - -## ADORE layer - -[![ADORE layer](https://github.com/algernon/ergodox-layout/raw/master/images/adore-layer.png)](http://www.keyboard-layout-editor.com/#/gists/45681a17453d235925b6028dd83bf12a) - -My experimental layout, that I keep tweaking. No full description here, because things are very much in flux. - -Note that the **HUN** layer does not work well with ADORE: it still has the same layout as on the [Base](#base-layer) layer. This will remain until ADORE becomes the default. - -## Steno layer - -[![Steno layer for Plover](https://github.com/algernon/ergodox-layout/raw/master/images/steno-layer.png)](http://www.keyboard-layout-editor.com/#/gists/401ef9a84369e47c57f9aedcf0a0d667) - -This is to be used with [Plover](http://www.openstenoproject.org/plover/), nothing really fancy here. The **STENO** key toggles the layer on and off, and sends the toggle command to Plover too. - -## LED states - -The primary purpose of the LEDs is to show the modifier status, a secondary, to show which layer is active. Each modifier, `Shift`, `Alt` and `Control` each have their designated LEDs: the *red*, *green* and *blue*, respectively. When a modifier is in a one-shot state, the respective LED will turn on with a dimmer light. If the modifier is toggled on, the brightness of the LED turns full. - -For the layers, the following rules apply: - -* When the [ADORE layer](#adore-layer) is toggled on, LEDs will light up from left to right in a sequence, then turn off. When the layer is toggled off, the LEDs light up and turn off in the other direction. No LEDs are on while the layer is active. -* When the **Hungarian** layer is active, the *green* and *blue* LEDs are on. -* When the **Media** layer is active, the *red* and *green* ones are on. -* When the **ARROW** layer is active, the *red* and *blue* ones are on. -* For the [Steno layer](#steno-layer), all LEDs will be turned on. - -Unless noted otherwise, the layers use a dim light for the LEDs, while modifiers use a stronger one, and modifiers override any layer preferences. For example, when on the one-handed layer, with the left side active (*red* light blinking), if `Shift` is on, the *red* light will be constantly on. - -# Special features - -## Unicode Symbol Input - -Once in the Unicode Symbol Input mode, one is able to type in symbol names, press `Enter` or `Space`, and get the Unicode symbol itself back. When in the mode, a capital `U` is printed first. Once the sequence is finished, all of it is erased by sending enough `Backspace` taps, and the firmware starts the OS-specific unicode input sequence. Then, it looks up the symbol name, and enters the associated code. If it is not found, it will just replay the pressed keycodes. - -For the list of supported symbols, please see the source. - -This is an experimental feature, and may or may not work reliably. - -# Tools - -## Heatmap - -When the keypress logging functionality is enabled (by `LEAD d`), the keyboard will output a line every time a key is pressed, containing the position of the key in the matrix. This allows one to collect this information, and build analytics over it, such as a heat map, including dead keys too. - -Included with the firmware is a small tool that can parse these logs, and create a heatmap that one can import into [KLE][kle]. To use it, either pipe the output of `hid_listen` into it, or pipe it an already saved log, and it will save the results into files in an output directory (given on the command-line). See the output of `tools/log-to-heatmap.py --help` for more information. - - [kle]: http://www.keyboard-layout-editor.com/ - -The generated heatmap looks somewhat like this: - - ![Heatmap](https://github.com/algernon/ergodox-layout/raw/master/images/heatmap.png) - -## Layer notification - -There is a very small tool in `tools/layer-notify`, that listens to the HID console, looking for layer change events, and pops up a notification for every detected change. It is a very simple tool, mainly serving as an example. - -# Building - -To make my workflow easier, this layout is maintained in [its own repository][algernon:ez-layout]. To build it, you will need the [QMK][qmk] firmware checked out, and this repo either checked out to something like `layouts/community/algernon_master`, or symlinked there. One way to achieve that is this: - - [algernon:ez-layout]: https://github.com/algernon/ergodox-layout - [qmk]: https://github.com/qmk/qmk_firmware - -``` -$ git clone https://github.com/qmk/qmk_firmware.git -$ cd qmk_firmware -$ git clone https://github.com/algernon/ergodox-layout.git \ - layouts/community/ergodox/algernon_master -$ make ergodox_ez:algernon_master -``` - -From time to time, updates may be submitted back to the QMK repository. If you are reading it there, you can build the firmware like any other firmware included with it (assuming you are in the root directory of the firmware): - -``` -$ make ergodox_ez:algernon -``` - -## Using on Windows - -The keymap default to forcing NKRO, which seems to upset Windows, and except the modifiers, none of them work. If you experience this problem, recompile the firmware with `FORCE_NKRO=no` added to the `make` command line. - -# License - -The layout, being a derivative of the original TMK firmware which is under the GPL-2+, this layout is under the GPL as well, but GPL-3+, rather than the older version. diff --git a/layouts/community/ergodox/algernon/rules.mk b/layouts/community/ergodox/algernon/rules.mk deleted file mode 100644 index e8972cf100..0000000000 --- a/layouts/community/ergodox/algernon/rules.mk +++ /dev/null @@ -1,43 +0,0 @@ -BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -COMMAND_ENABLE=no -SLEEP_LED_ENABLE=no -FORCE_NKRO ?= yes -DEBUG_ENABLE = no -CONSOLE_ENABLE = no -TAP_DANCE_ENABLE = yes -KEYLOGGER_ENABLE ?= yes -UCIS_ENABLE = yes -MOUSEKEY_ENABLE = no -LEADER_ENABLE = yes -RGBLIGHT_ENABLE = no - -AUTOLOG_ENABLE ?= yes - -ifeq (${FORCE_NKRO},yes) -OPT_DEFS += -DFORCE_NKRO -endif - -ifeq (${AUTOLOG_ENABLE},yes) -KEYLOGGER_ENABLE = yes -OPT_DEFS += -DAUTOLOG_ENABLE -endif - -ifeq (${KEYLOGGER_ENABLE},yes) -OPT_DEFS += -DKEYLOGGER_ENABLE -CONSOLE_ENABLE = yes -endif - -OPT_DEFS += -DUSER_PRINT - -LAYOUT_ergodox_VERSION = $(shell \ - if [ -d "${LAYOUT_ergodox_PATH}/.git" ]; then \ - cd "${LAYOUT_ergodox_PATH}" && git describe --abbrev=6 --dirty --always --tags --match 'v*' 2>/dev/null; \ - else echo QMK; fi) - -LAYOUT_ergodox_BRANCH = $(shell \ - if [ -d "${LAYOUT_ergodox_PATH}/.git" ]; then \ - cd "${LAYOUT_ergodox_PATH}"; \ - fi; \ - git rev-parse --abbrev-ref HEAD 2>/dev/null) - -OPT_DEFS += -DLAYOUT_ergodox_VERSION=\"$(LAYOUT_ergodox_VERSION)\\\#$(LAYOUT_ergodox_BRANCH)\" diff --git a/layouts/community/ergodox/algernon/tools/heatmap-layout.ADORE.json b/layouts/community/ergodox/algernon/tools/heatmap-layout.ADORE.json deleted file mode 100644 index e09efecc46..0000000000 --- a/layouts/community/ergodox/algernon/tools/heatmap-layout.ADORE.json +++ /dev/null @@ -1,486 +0,0 @@ -[ - { - "backcolor": "#ffffff", - "name": "ErgoDox - algernon's layout: Heatmap", - "author": "Gergely Nagy ", - "notes": "See [here](https://github.com/algernon/ergodox-layout#readme) for the QMK keymap source.", - "switchMount": "cherry", - "switchBrand": "gateron", - "switchType": "KS-3-Tea", - "pcb": true, - "css": ".keyborder { -webkit-filter: blur(5px); filter: blur(5px); } .keytop { -webkit-filter: blur(10px); } .keylabels { border: 1px solid black; }" - }, - [ - { - "x": 3.5, - "fa": [ - 0, - 0, - 2 - ] - }, - "*\n5\nF5", - { - "x": 10.5, - "a": 4, - "fa": [ - 0, - 0, - 2 - ] - }, - "#\n4\nF4" - ], - [ - { - "y": -0.875, - "x": 2.5 - }, - "@\n7\nF7", - { - "x": 1 - }, - "^\n3\nF3", - { - "x": 8.5 - }, - "!\n2\nF2", - { - "x": 1 - }, - "&\n6\nF6" - ], - [ - { - "y": -0.875, - "x": 5.5 - }, - "$\n1\nF1", - { - "a": 7, - "f": 3 - }, - "F11", - { - "x": 4.5, - "f": 3 - }, - "Fx", - { - "a": 4, - "f": 3, - "fa": [ - 0, - 0, - 2 - ] - }, - "%\n0\nF10" - ], - [ - { - "y": -0.875, - "f": 9, - "a": 6, - "w": 1.5 - }, - "\n\n", - { - "f": 3, - "a": 4, - "fa": [ - 0, - 0, - 2 - ] - }, - " \n9\nF9", - { - "x": 14.5 - }, - " \n8\nF8", - { - "a": 7, - "w": 1.5 - }, - "STENO" - ], - [ - { - "y": -0.375, - "x": 3.5, - "a": 6 - }, - "C", - { - "x": 10.5 - }, - "L" - ], - [ - { - "y": -0.875, - "x": 2.5, - "a": 6 - }, - "W", - { - "x": 1, - "a": 6 - }, - "H", - { - "x": 8.5 - }, - "G", - { - "x": 1 - }, - "P" - ], - [ - { - "y": -0.875, - "x": 5.5 - }, - "F", - { - "a": 4, - "fa": [0, 0, 0], - "h": 1.5 - }, - "{\n(\n[", - { - "x": 4.5, - "h": 1.5 - }, - "}\n)\n]", - { - "a": 6 - }, - "M" - ], - [ - { - "y": -0.875, - "f": 3, - "a": 4, - "w": 1.5 - }, - "\n\n|\n\\", - { - "a": 6, - "f": 3 - }, - "X", - { - "x": 14.5, - "a": 4 - }, - "/\n?", - { - "a": 4, - "w": 1.5 - }, - "~\n`" - ], - [ - { - "y": -0.375, - "x": 3.5, - "a": 6 - }, - "E", - { - "x": 10.5 - }, - "T" - ], - [ - { - "y": -0.875, - "x": 2.5 - }, - "O", - { - "x": 1, - "n": true - }, - "I", - { - "x": 8.5, - "n": true - }, - "R", - { - "x": 1 - }, - "N" - ], - [ - { - "y": -0.875, - "x": 5.5 - }, - "U", - { - "x": 6.5 - }, - "D" - ], - [ - { - "y": -0.875, - "fa": [ - 6 - ], - "w": 1.5 - }, - "\n\nTab", - { - "f": 3 - }, - "A", - { - "x": 14.5, - "f": 3 - }, - "S", - { - "a": 4, - "fa": [ - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 6 - ], - "w": 1.5 - }, - "+\n=" - ], - [ - { - "y": -0.625, - "x": 6.5, - "a": 7, - "f": 9, - "h": 1.5 - }, - "", - { - "x": 4.5, - "h": 1.5 - }, - "" - ], - [ - { - "y": -0.75, - "x": 3.5, - "a": 4, - "f": 3 - }, - "\"\n'", - { - "x": 10.5, - "a": 6, - "f": 3 - }, - "V" - ], - [ - { - "y": -0.875, - "x": 2.5, - "a": 6 - }, - "Q", - { - "x": 1, - "a": 4 - }, - "<\n,", - { - "x": 8.5, - "a": 6 - }, - "K", - { - "x": 1 - }, - "Y" - ], - [ - { - "y": -0.875, - "x": 5.5, - "a": 4 - }, - ">\n.", - { - "x": 6.5, - "a": 6 - }, - "B" - ], - [ - { - "y": -0.875, - "f": 9, - "w": 1.5, - "g": true - }, - "", - { - "a": 6, - "f": 3, - "g": false - }, - "Z", - { - "x": 14.5 - }, - "J", - { - "f": 9, - "g": true, - "w": 1.5, - "a": 4 - }, - "" - ], - [ - { - "y": -0.375, - "x": 3.5, - "g": true, - "a": 7, - "f": 3 - }, - "", - { - "x": 10.5 - }, - "" - ], - [ - { - "y": -0.875, - "x": 2.5 - }, - "", - { - "x": 1, - "g": false, - "a": 5 - }, - ";\n:", - { - "x": 8.5 - }, - "_\n-", - { - "x": 1, - "g": true, - "a": 7 - }, - "" - ], - [ - { - "y": -0.75, - "x": 0.5 - }, - "", - {}, - "", - { - "x": 14.5 - }, - "", - {}, - "" - ], - [ - { - "r": 30, - "rx": 6.5, - "ry": 4.25, - "y": -1, - "x": 1, - "g": false - }, - "Alt", - { - "a": 4, - "fa": [ - 0, - 0, - 0, - 9 - ] - }, - "\n\n\n" - ], - [ - { - "a": 7, - "f": 9, - "h": 2 - }, - "", - { - "h": 2 - }, - "", - { - "f": 3 - }, - "Ctrl" - ], - [ - { - "x": 2 - }, - "ESC" - ], - [ - { - "r": -30, - "rx": 13, - "y": -1, - "x": -3, - "f": 2 - }, - "MEDIA", - {}, - "DEL" - ], - [ - { - "x": -3 - }, - "HUN", - { - "f": 9, - "h": 2 - }, - "", - { - "f": 3, - "h": 2 - }, - "SPC" - ], - [ - { - "x": -3, - "f": 2 - }, - "LEAD" - ] -] diff --git a/layouts/community/ergodox/algernon/tools/heatmap-layout.Dvorak.json b/layouts/community/ergodox/algernon/tools/heatmap-layout.Dvorak.json deleted file mode 100644 index 1e53281c56..0000000000 --- a/layouts/community/ergodox/algernon/tools/heatmap-layout.Dvorak.json +++ /dev/null @@ -1,477 +0,0 @@ -[ - { - "backcolor": "#ffffff", - "name": "ErgoDox - algernon's layout: Heatmap", - "author": "Gergely Nagy ", - "notes": "See [here](https://github.com/algernon/ergodox-layout#readme) for the QMK keymap source.", - "switchMount": "cherry", - "switchBrand": "gateron", - "switchType": "KS-3-Tea", - "pcb": true, - "css": ".keyborder { -webkit-filter: blur(5px); filter: blur(5px); } .keytop { -webkit-filter: blur(10px); } .keylabels { border: 1px solid black; }" - }, - [ - { - "x": 3.5, - "fa": [ - 0, - 0, - 2 - ] - }, - "*\n5\nF5", - { - "x": 10.5, - "a": 4, - "fa": [ - 0, - 0, - 2 - ] - }, - "#\n4\nF4" - ], - [ - { - "y": -0.875, - "x": 2.5 - }, - "@\n7\nF7", - { - "x": 1 - }, - "^\n3\nF3", - { - "x": 8.5 - }, - "!\n2\nF2", - { - "x": 1 - }, - "&\n6\nF6" - ], - [ - { - "y": -0.875, - "x": 5.5 - }, - "$\n1\nF1", - { - "a": 7, - "f": 3 - }, - "F11", - { - "x": 4.5, - "f": 3 - }, - "Fx", - { - "a": 4, - "f": 3, - "fa": [ - 0, - 0, - 2 - ] - }, - "%\n0\nF10" - ], - [ - { - "y": -0.875, - "f": 6, - "a": 6, - "w": 1.5 - }, - "\n\n", - { - "f": 3, - "a": 4, - "fa": [ - 0, - 0, - 2 - ] - - }, - " \n9\nF9", - { - "x": 14.5 - }, - " \n8\nF8", - { - "a": 7, - "w": 1.5 - }, - "STENO" - ], - [ - { - "y": -0.375, - "x": 3.5, - "a": 4 - }, - ">\n.", - { - "x": 10.5, - "a": 6 - }, - "C" - ], - [ - { - "y": -0.875, - "x": 2.5, - "a": 4 - }, - "<\n,", - { - "x": 1, - "a": 6 - }, - "P", - { - "x": 8.5 - }, - "G", - { - "x": 1 - }, - "R" - ], - [ - { - "y": -0.875, - "x": 5.5 - }, - "Y", - { - "a": 4, - "h": 1.5 - }, - "{\n(\n[", - { - "x": 4.5, - "h": 1.5 - }, - "}\n)\n]", - { - "a": 6 - }, - "F" - ], - [ - { - "y": -0.875, - "f": 3, - "a": 4, - "w": 1.5 - }, - "\n\n~\n`", - { - "a": 4, - "f": 3 - }, - "\"\n'", - { - "x": 14.5, - "a": 6 - }, - "L", - { - "a": 4, - "w": 1.5 - }, - "|\n\\" - ], - [ - { - "y": -0.375, - "x": 3.5, - "a": 6 - }, - "E", - { - "x": 10.5 - }, - "T" - ], - [ - { - "y": -0.875, - "x": 2.5 - }, - "O", - { - "x": 1, - "n": true - }, - "U", - { - "x": 8.5, - "n": true - }, - "H", - { - "x": 1 - }, - "N" - ], - [ - { - "y": -0.875, - "x": 5.5 - }, - "I", - { - "x": 6.5 - }, - "D" - ], - [ - { - "y": -0.875, - "fa": [ - 6 - ], - "w": 1.5 - }, - "\n\nTab", - { - "f": 3 - }, - "A", - { - "x": 14.5, - "f": 3 - }, - "S", - { - "a": 4, - "fa": [ - 0, - 0, - 0, - 0, - 0, - 0, - 0, - 6 - ], - "w": 1.5 - }, - "+\n=" - ], - [ - { - "y": -0.625, - "x": 6.5, - "a": 7, - "f": 9, - "h": 1.5 - }, - "", - { - "x": 4.5, - "h": 1.5 - }, - "" - ], - [ - { - "y": -0.75, - "x": 3.5, - "f": 3, - "a": 6 - }, - "J", - { - "x": 10.5 - }, - "W" - ], - [ - { - "y": -0.875, - "x": 2.5 - }, - "Q", - { - "x": 1 - }, - "K", - { - "x": 8.5 - }, - "M", - { - "x": 1 - }, - "V" - ], - [ - { - "y": -0.875, - "x": 5.5 - }, - "X", - { - "x": 6.5 - }, - "B" - ], - [ - { - "y": -0.875, - "f": 9, - "w": 1.5 - }, - "\n\n", - { - "a": 4, - "f": 3 - }, - "?\n/", - { - "x": 14.5, - "a": 6 - }, - "Z", - { - "f": 9, - "w": 1.5 - }, - "" - ], - [ - { - "y": -0.375, - "x": 3.5, - "g": true, - "a": 7, - "f": 3 - }, - "", - { - "x": 10.5 - }, - "" - ], - [ - { - "y": -0.875, - "x": 2.5 - }, - "", - { - "x": 1, - "g": false, - "a": 5 - }, - ";\n:", - { - "x": 8.5 - }, - "_\n-", - { - "x": 1, - "g": true, - "a": 7 - }, - "" - ], - [ - { - "y": -0.75, - "x": 0.5 - }, - "", - {}, - "", - { - "x": 14.5 - }, - "", - {}, - "" - ], - [ - { - "r": 30, - "rx": 6.5, - "ry": 4.25, - "y": -1, - "x": 1, - "g": false - }, - "Alt", - { - "a": 4, - "fa": [ - 0, - 0, - 0, - 9 - ] - }, - "\n\n\n" - ], - [ - { - "a": 7, - "f": 9, - "h": 2 - }, - "", - { - "h": 2 - }, - "", - { - "f": 3 - }, - "Ctrl" - ], - [ - { - "x": 2 - }, - "ESC" - ], - [ - { - "r": -30, - "rx": 13, - "y": -1, - "x": -3, - "f": 2 - }, - "MEDIA", - {}, - "DEL" - ], - [ - { - "x": -3 - }, - "LEAD", - { - "f": 9, - "h": 2 - }, - "", - { - "f": 3, - "h": 2 - }, - "SPC" - ], - [ - { - "x": -3, - "f": 2 - }, - "HUN" - ] -] diff --git a/layouts/community/ergodox/algernon/tools/hid-commands b/layouts/community/ergodox/algernon/tools/hid-commands deleted file mode 100755 index 86bff2978e..0000000000 --- a/layouts/community/ergodox/algernon/tools/hid-commands +++ /dev/null @@ -1,113 +0,0 @@ -#!/bin/bash -set -e - -LAST_APPSEL_START=0 - -cmd_wm () { - WIN="$(xdotool getactivewindow)" - wmctrl -i -r ${WIN} -b remove,maximized_vert,maximized_horz - xdotool windowsize ${WIN} 100% 100% - wmctrl -i -r ${WIN} -b add,maximized_vert,maximized_horz -} - -cmd_appsel_helper () { - rofi -show window -} - -_cmd_appsel () { - wmctrl -x -a $1 || true - xdotool key Escape -} - -cmd_appsel_music () { - wmctrl -x -a rhythmbox || wmctrl -x -a spotify || \ - wmctrl -x -a banshee || wmctrl -x -a kodi || \ - wmctrl -x -a plex || true - xdotool key Escape -} - -cmd_appsel_slack () { - wmctrl -x -a slack || wmctrl -x -a Mstdn || true - xdotool key Escape -} - -cmd_appsel_emacs () { - _cmd_appsel emacs -} - -cmd_appsel_term () { - _cmd_appsel gnome-terminal -} - -cmd_appsel_chrome () { - wmctrl -x -a chrom || wmctrl -x -a Chrome || true - xdotool key Escape -} - -cmd_appsel_start () { - if [ ! -z "${DISABLE_APPSEL_START}" ]; then - return - fi - - APPSEL_START=$(date +%s) - if [ $APPSEL_START -lt $(expr $LAST_APPSEL_START + 10) ]; then - return - fi - LAST_APPSEL_START=$APPSEL_START - notify-send -t 1000 "Please select an application!" -c device -u low \ - -i /usr/share/icons/Adwaita/24x24/devices/video-display.png -} - -cmd_appsel_social () { - # Save the current window - a=$(xdotool getactivewindow) - # Raise & Focus Mstdn & Tweetdeck - wmctrl -x -a trunk.mad-scientist.club.Google-chrome || true; wmctrl -x -a tweetdeck || true - # Focus the previously active window - xdotool windowfocus $a || true; xdotool windowactivate $a || true - - xdotool key Escape -} - -cmd_appsel_social2 () { - # Save the current window - a=$(xdotool getactivewindow) - # Raise & Focus Viber & Signal - wmctrl -x -a Viber || true; wmctrl -a Signal || true - # Focus the previously active window - xdotool windowfocus $a || true; xdotool windowactivate $a || true - - xdotool key Escape -} - -cmd_appsel_pwmgr () { - _cmd_appsel keepass -} - -cmd_reflash () { - teensy_loader_cli -v -w ~/src/ext/qmk_firmware/algernon.hex --mcu atmega32u4 || true -} - -cmd_help () { - cat </dev/null 2>&1; then - cmd_${cmd} - fi -done diff --git a/layouts/community/ergodox/algernon/tools/log-to-heatmap.py b/layouts/community/ergodox/algernon/tools/log-to-heatmap.py deleted file mode 100755 index 5f52d9932b..0000000000 --- a/layouts/community/ergodox/algernon/tools/log-to-heatmap.py +++ /dev/null @@ -1,342 +0,0 @@ -#! /usr/bin/env python3 -import json -import os -import sys -import re -import argparse -import time - -from math import floor -from os.path import dirname -from blessings import Terminal - -class Heatmap(object): - coords = [ - [ - # Row 0 - [ 4, 0], [ 4, 2], [ 2, 0], [ 1, 0], [ 2, 2], [ 3, 0], [ 3, 2], - [ 3, 4], [ 3, 6], [ 2, 4], [ 1, 2], [ 2, 6], [ 4, 4], [ 4, 6], - ], - [ - # Row 1 - [ 8, 0], [ 8, 2], [ 6, 0], [ 5, 0], [ 6, 2], [ 7, 0], [ 7, 2], - [ 7, 4], [ 7, 6], [ 6, 4], [ 5, 2], [ 6, 6], [ 8, 4], [ 8, 6], - ], - [ - # Row 2 - [12, 0], [12, 2], [10, 0], [ 9, 0], [10, 2], [11, 0], [ ], - [ ], [11, 2], [10, 4], [ 9, 2], [10, 6], [12, 4], [12, 6], - ], - [ - # Row 3 - [17, 0], [17, 2], [15, 0], [14, 0], [15, 2], [16, 0], [13, 0], - [13, 2], [16, 2], [15, 4], [14, 2], [15, 6], [17, 4], [17, 6], - ], - [ - # Row 4 - [20, 0], [20, 2], [19, 0], [18, 0], [19, 2], [], [], [], [], - [19, 4], [18, 2], [19, 6], [20, 4], [20, 6], [], [], [], [] - ], - [ - # Row 5 - [ ], [23, 0], [22, 2], [22, 0], [22, 4], [21, 0], [21, 2], - [24, 0], [24, 2], [25, 0], [25, 4], [25, 2], [26, 0], [ ], - ], - ] - - def set_attr_at(self, block, n, attr, fn, val): - blk = self.heatmap[block][n] - if attr in blk: - blk[attr] = fn(blk[attr], val) - else: - blk[attr] = fn(None, val) - - def coord(self, col, row): - return self.coords[row][col] - - @staticmethod - def set_attr(orig, new): - return new - - def set_bg(self, coords, color): - (block, n) = coords - self.set_attr_at(block, n, "c", self.set_attr, color) - #self.set_attr_at(block, n, "g", self.set_attr, False) - - def set_tap_info(self, coords, count, cap): - (block, n) = coords - def _set_tap_info(o, _count, _cap): - ns = 4 - o.count ("\n") - return o + "\n" * ns + "%.02f%%" % (float(_count) / float(_cap) * 100) - - if not cap: - cap = 1 - self.heatmap[block][n + 1] = _set_tap_info (self.heatmap[block][n + 1], count, cap) - - @staticmethod - def heatmap_color (v): - colors = [ [0.3, 0.3, 1], [0.3, 1, 0.3], [1, 1, 0.3], [1, 0.3, 0.3]] - fb = 0 - if v <= 0: - idx1, idx2 = 0, 0 - elif v >= 1: - idx1, idx2 = len(colors) - 1, len(colors) - 1 - else: - val = v * (len(colors) - 1) - idx1 = int(floor(val)) - idx2 = idx1 + 1 - fb = val - float(idx1) - - r = (colors[idx2][0] - colors[idx1][0]) * fb + colors[idx1][0] - g = (colors[idx2][1] - colors[idx1][1]) * fb + colors[idx1][1] - b = (colors[idx2][2] - colors[idx1][2]) * fb + colors[idx1][2] - - r, g, b = [x * 255 for x in (r, g, b)] - return "#%02x%02x%02x" % (int(r), int(g), int(b)) - - def __init__(self, layout): - self.log = {} - self.total = 0 - self.max_cnt = 0 - self.layout = layout - - def update_log(self, coords): - (c, r) = coords - if not (c, r) in self.log: - self.log[(c, r)] = 0 - self.log[(c, r)] = self.log[(c, r)] + 1 - self.total = self.total + 1 - if self.max_cnt < self.log[(c, r)]: - self.max_cnt = self.log[(c, r)] - - def get_heatmap(self): - with open("%s/heatmap-layout.%s.json" % (dirname(sys.argv[0]), self.layout), "r") as f: - self.heatmap = json.load (f) - - ## Reset colors - for row in self.coords: - for coord in row: - if coord != []: - self.set_bg (coord, "#d9dae0") - - for (c, r) in self.log: - coords = self.coord(c, r) - cap = self.max_cnt - if cap == 0: - cap = 1 - v = float(self.log[(c, r)]) / cap - self.set_bg (coords, self.heatmap_color (v)) - self.set_tap_info (coords, self.log[(c, r)], self.total) - return self.heatmap - - def get_stats(self): - usage = [ - # left hand - [0, 0, 0, 0, 0], - # right hand - [0, 0, 0, 0, 0] - ] - finger_map = [0, 0, 1, 2, 3, 3, 3, 1, 1, 1, 2, 3, 4, 4] - for (c, r) in self.log: - if r == 5: # thumb cluster - if c <= 6: # left side - usage[0][4] = usage[0][4] + self.log[(c, r)] - else: - usage[1][0] = usage[1][0] + self.log[(c, r)] - elif r == 4 and (c == 4 or c == 9): # bottom row thumb keys - if c <= 6: # left side - usage[0][4] = usage[0][4] + self.log[(c, r)] - else: - usage[1][0] = usage[1][0] + self.log[(c, r)] - else: - fc = c - hand = 0 - if fc >= 7: - hand = 1 - fm = finger_map[fc] - usage[hand][fm] = usage[hand][fm] + self.log[(c, r)] - hand_usage = [0, 0] - for f in usage[0]: - hand_usage[0] = hand_usage[0] + f - for f in usage[1]: - hand_usage[1] = hand_usage[1] + f - - total = self.total - if total == 0: - total = 1 - stats = { - "total-keys": total, - "hands": { - "left": { - "usage": round(float(hand_usage[0]) / total * 100, 2), - "fingers": { - "pinky": 0, - "ring": 0, - "middle": 0, - "index": 0, - "thumb": 0, - } - }, - "right": { - "usage": round(float(hand_usage[1]) / total * 100, 2), - "fingers": { - "thumb": 0, - "index": 0, - "middle": 0, - "ring": 0, - "pinky": 0, - } - }, - } - } - - hmap = ['left', 'right'] - fmap = ['pinky', 'ring', 'middle', 'index', 'thumb', - 'thumb', 'index', 'middle', 'ring', 'pinky'] - for hand_idx in range(len(usage)): - hand = usage[hand_idx] - for finger_idx in range(len(hand)): - stats['hands'][hmap[hand_idx]]['fingers'][fmap[finger_idx + hand_idx * 5]] = round(float(hand[finger_idx]) / total * 100, 2) - return stats - -def dump_all(out_dir, heatmaps): - stats = {} - t = Terminal() - t.clear() - sys.stdout.write("\x1b[2J\x1b[H") - - print ('{t.underline}{outdir}{t.normal}\n'.format(t=t, outdir=out_dir)) - - keys = list(heatmaps.keys()) - keys.sort() - - for layer in keys: - if len(heatmaps[layer].log) == 0: - continue - - with open ("%s/%s.json" % (out_dir, layer), "w") as f: - json.dump(heatmaps[layer].get_heatmap(), f) - stats[layer] = heatmaps[layer].get_stats() - - left = stats[layer]['hands']['left'] - right = stats[layer]['hands']['right'] - - print ('{t.bold}{layer}{t.normal} ({total:,} taps):'.format(t=t, layer=layer, - total=int(stats[layer]['total-keys'] / 2))) - print (('{t.underline} | ' + \ - 'left ({l[usage]:6.2f}%) | ' + \ - 'right ({r[usage]:6.2f}%) |{t.normal}').format(t=t, l=left, r=right)) - print ((' {t.bright_magenta}pinky{t.white} | {left[pinky]:6.2f}% | {right[pinky]:6.2f}% |\n' + \ - ' {t.bright_cyan}ring{t.white} | {left[ring]:6.2f}% | {right[ring]:6.2f}% |\n' + \ - ' {t.bright_blue}middle{t.white} | {left[middle]:6.2f}% | {right[middle]:6.2f}% |\n' + \ - ' {t.bright_green}index{t.white} | {left[index]:6.2f}% | {right[index]:6.2f}% |\n' + \ - ' {t.bright_red}thumb{t.white} | {left[thumb]:6.2f}% | {right[thumb]:6.2f}% |\n' + \ - '').format(left=left['fingers'], right=right['fingers'], t=t)) - -def process_line(line, heatmaps, opts, stamped_log = None): - m = re.search ('KL: col=(\d+), row=(\d+), pressed=(\d+), layer=(.*)', line) - if not m: - return False - if stamped_log is not None: - if line.startswith("KL:"): - print ("%10.10f %s" % (time.time(), line), - file = stamped_log, end = '') - else: - print (line, - file = stamped_log, end = '') - stamped_log.flush() - - (c, r, l) = (int(m.group (2)), int(m.group (1)), m.group (4)) - if (c, r) not in opts.allowed_keys: - return False - - heatmaps[l].update_log ((c, r)) - - return True - -def setup_allowed_keys(opts): - if len(opts.only_key): - incmap={} - for v in opts.only_key: - m = re.search ('(\d+),(\d+)', v) - if not m: - continue - (c, r) = (int(m.group(1)), int(m.group(2))) - incmap[(c, r)] = True - else: - incmap={} - for r in range(0, 6): - for c in range(0, 14): - incmap[(c, r)] = True - - for v in opts.ignore_key: - m = re.search ('(\d+),(\d+)', v) - if not m: - continue - (c, r) = (int(m.group(1)), int(m.group(2))) - del(incmap[(c, r)]) - - return incmap - -def main(opts): - heatmaps = {"Dvorak": Heatmap("Dvorak"), - "ADORE": Heatmap("ADORE") - } - cnt = 0 - out_dir = opts.outdir - - if not os.path.exists(out_dir): - os.makedirs(out_dir) - - opts.allowed_keys = setup_allowed_keys(opts) - - if not opts.one_shot: - - try: - with open("%s/stamped-log" % out_dir, "r") as f: - while True: - line = f.readline() - if not line: - break - if not process_line(line, heatmaps, opts): - continue - except Exception: - pass - - stamped_log = open ("%s/stamped-log" % (out_dir), "a+") - else: - stamped_log = None - - while True: - line = sys.stdin.readline() - if not line: - break - if not process_line(line, heatmaps, opts, stamped_log): - continue - - cnt = cnt + 1 - - if opts.dump_interval != -1 and cnt >= opts.dump_interval and not opts.one_shot: - cnt = 0 - dump_all(out_dir, heatmaps) - - dump_all (out_dir, heatmaps) - -if __name__ == "__main__": - parser = argparse.ArgumentParser (description = "keylog to heatmap processor") - parser.add_argument ('outdir', action = 'store', - help = 'Output directory') - parser.add_argument ('--dump-interval', dest = 'dump_interval', action = 'store', type = int, - default = 100, help = 'Dump stats and heatmap at every Nth event, -1 for dumping at EOF only') - parser.add_argument ('--ignore-key', dest = 'ignore_key', action = 'append', type = str, - default = [], help = 'Ignore the key at position (x, y)') - parser.add_argument ('--only-key', dest = 'only_key', action = 'append', type = str, - default = [], help = 'Only include key at position (x, y)') - parser.add_argument ('--one-shot', dest = 'one_shot', action = 'store_true', - help = 'Do not load previous data, and do not update it, either.') - args = parser.parse_args() - if len(args.ignore_key) and len(args.only_key): - print ("--ignore-key and --only-key are mutually exclusive, please only use one of them!", - file = sys.stderr) - sys.exit(1) - main(args) diff --git a/layouts/community/ergodox/algernon/tools/text-to-log.py b/layouts/community/ergodox/algernon/tools/text-to-log.py deleted file mode 100755 index ba60a2e281..0000000000 --- a/layouts/community/ergodox/algernon/tools/text-to-log.py +++ /dev/null @@ -1,106 +0,0 @@ -#!/usr/bin/env python3 - -import sys - -charmap = { - '9': [[1, 0]], - '7': [[2, 0]], '@': [[2, 5], [2, 0]], - '5': [[3, 0]], '*': [[2, 5], [3, 0]], - '3': [[4, 0]], '^': [[2, 5], [4, 0]], - '1': [[5, 0]], '$': [[2, 5], [5, 0]], - '0': [[8, 0]], '%': [[2, 5], [8, 0]], - '2': [[9, 0]], '!': [[2, 5], [9, 0]], - '4': [[10, 0]], '#': [[2, 5], [10, 0]], - '6': [[11, 0]], '&': [[2, 5], [11, 0]], - '8': [[12, 0]], - - '\\': [[0, 1]], '|': [[2, 5], [0, 1]], - 'x': [[1, 1]], 'X': [[2, 5], [1, 1]], - 'w': [[2, 1]], 'W': [[2, 5], [2, 1]], - 'c': [[3, 1]], 'C': [[2, 5], [3, 1]], - 'h': [[4, 1]], 'H': [[2, 5], [4, 1]], - 'f': [[5, 1]], 'F': [[2, 5], [5, 1]], - '[': [[6, 1]], '{': [[2, 5], [6, 1]], '(': [[6, 1], [6, 1]], - ']': [[7, 1]], '}': [[2, 5], [7, 1]], ')': [[7, 1], [7, 1]], - 'm': [[8, 1]], 'M': [[2, 5], [8, 1]], - 'g': [[9, 1]], 'G': [[2, 5], [9, 1]], - 'l': [[10, 1]], 'L': [[2, 5], [10, 1]], - 'p': [[11, 1]], 'P': [[2, 5], [11, 1]], - '/': [[12, 1]], '?': [[2, 5], [12, 1]], - '`': [[13, 1]], '~': [[2, 5], [13, 1]], - - '\t': [[0, 2]], - 'a': [[1, 2]], 'A': [[2, 5], [1, 2]], - 'o': [[2, 2]], 'O': [[2, 5], [2, 2]], - 'e': [[3, 2]], 'E': [[2, 5], [3, 2]], - 'i': [[4, 2]], 'I': [[2, 5], [4, 2]], - 'u': [[5, 2]], 'U': [[2, 5], [5, 2]], - 'd': [[8, 2]], 'D': [[2, 5], [8, 2]], - 'r': [[9, 2]], 'R': [[2, 5], [9, 2]], - 't': [[10, 2]], 'T': [[2, 5], [10, 2]], - 'n': [[11, 2]], 'N': [[2, 5], [11, 2]], - 's': [[12, 2]], 'S': [[2, 5], [12, 2]], - '=': [[13, 2]], '+': [[2, 5], [13, 2]], - - 'z': [[1, 3]], 'Z': [[2, 5], [1, 3]], - 'q': [[2, 3]], 'Q': [[2, 5], [2, 3]], - '\'': [[3, 3]], '"': [[2, 5], [3, 3]], - ',': [[4, 3]], '<': [[2, 5], [4, 3]], - '.': [[5, 3]], '>': [[2, 5], [5, 3]], - 'b': [[8, 3]], 'B': [[2, 5], [8, 3]], - 'k': [[9, 3]], 'K': [[2, 5], [9, 3]], - 'v': [[10, 3]], 'V': [[2, 5], [10, 3]], - 'y': [[11, 3]], 'Y': [[2, 5], [11, 3]], - 'j': [[12, 3]], 'J': [[2, 5], [12, 3]], - - ':': [[4, 4]], ';': [[4, 4], [4, 4]], - '-': [[9, 4]], '_': [[2, 5], [9, 4]], - - ' ': [[10, 5]], - '\n': [[11, 5]], - - ## Layered things - # Hungarian - 'á': [[9, 5], [1, 2]], 'Á': [[2, 5], [9, 5], [1, 2]], - 'ó': [[9, 5], [2, 2]], 'Ó': [[2, 5], [9, 5], [2, 2]], - 'ő': [[9, 5], [2, 1]], 'Ő': [[2, 5], [9, 5], [2, 1]], - 'ö': [[9, 5], [2, 3]], 'Ö': [[2, 5], [9, 5], [2, 3]], - 'é': [[9, 5], [3, 2]], 'É': [[2, 5], [9, 5], [3, 2]], - 'ú': [[9, 5], [4, 2]], 'Ú': [[2, 5], [9, 5], [4, 2]], - 'ű': [[9, 5], [4, 1]], 'Ű': [[2, 5], [9, 5], [4, 1]], - 'ü': [[9, 5], [4, 3]], 'Ü': [[2, 5], [9, 5], [4, 3]], - 'í': [[9, 5], [5, 2]], 'Í': [[2, 5], [9, 5], [5, 2]], -} - -def lookup_char(layer, ch): - if ch in charmap: - return charmap[ch] - return None - -def process_char(layer, ch, out=sys.stdout): - keys = lookup_char(layer, ch) - if not keys: - print ("Unknown char: %s" % ch, file=sys.stderr) - else: - for (c, r) in keys: - print ("KL: col=%d, row=%d, pressed=1, layer=%s" % (r, c, layer), file=out) - print ("KL: col=%d, row=%d, pressed=0, layer=%s" % (r, c, layer), file=out) - -def process_file(fn, layer, out=sys.stdout): - with open(fn, "r") as f: - ch = f.read(1) - while ch: - process_char(layer, ch, out) - ch = f.read(1) - -if sys.argv[1] == '-': - out='/dev/stdin' -else: - out=sys.argv[1] - -if len(sys.argv) >= 2: - layer = 'ADORE' -else: - layer = sys.argv[2] - -process_file(out, layer = layer) diff --git a/layouts/community/ergodox/dragon788/keymap.c b/layouts/community/ergodox/dragon788/keymap.c index e777864851..956a592b6d 100644 --- a/layouts/community/ergodox/dragon788/keymap.c +++ b/layouts/community/ergodox/dragon788/keymap.c @@ -164,7 +164,7 @@ LAYOUT_ergodox( KC_NO, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_NO, KC_A, KC_S, KC_D, KC_F, KC_G, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - KC_FN4, KC_NO, + KC_NO, KC_NO, KC_NO, KC_C, KC_V, KC_NO, // right hand diff --git a/layouts/community/ergodox/dvorak_plover/keymap.c b/layouts/community/ergodox/dvorak_plover/keymap.c index 882a351d18..989aafb90a 100644 --- a/layouts/community/ergodox/dvorak_plover/keymap.c +++ b/layouts/community/ergodox/dvorak_plover/keymap.c @@ -122,7 +122,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_NO, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_NO, KC_A, KC_S, KC_D, KC_F, KC_G, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - KC_FN4, KC_NO, + KC_NO, KC_NO, KC_NO, KC_C, KC_V, KC_NO, // right hand diff --git a/layouts/community/ergodox/haegin/keymap.c b/layouts/community/ergodox/haegin/keymap.c index fbbe3e72e0..c3c2afecb8 100644 --- a/layouts/community/ergodox/haegin/keymap.c +++ b/layouts/community/ergodox/haegin/keymap.c @@ -55,7 +55,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_NO, KC_F, KC_G, KC_C, KC_R, KC_L, LT(MEDIA, KC_BSLS), KC_D, KC_H, KC_T, KC_N, KC_S, KC_MINS, MEH_T(KC_NO), KC_B, KC_M, KC_W, KC_V, KC_Z, KC_RSPC, - ALT_T(KC_UP), KC_DOWN, KC_LBRC, KC_RBRC, KC_FN2, + ALT_T(KC_UP), KC_DOWN, KC_LBRC, KC_RBRC, KC_NO, KC_PGUP, CTL_T(KC_ESC), KC_PGDN, LCTL(KC_B), LT(MEDIA, KC_TAB), LT(SYMBOLS, KC_ENT) diff --git a/layouts/community/ergodox/kines-ish/keymap.c b/layouts/community/ergodox/kines-ish/keymap.c index 8acab5ca52..2d1513667f 100644 --- a/layouts/community/ergodox/kines-ish/keymap.c +++ b/layouts/community/ergodox/kines-ish/keymap.c @@ -45,7 +45,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { TG(SYMB), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, MEH_T(KC_NO),KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, - KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_FN2, + KC_UP, KC_DOWN,KC_LBRC,KC_RBRC, KC_NO, KC_LGUI, KC_RCTL, KC_PGUP, KC_PGDN, KC_ENT, KC_SPC diff --git a/layouts/community/ergodox/mpiechotka/keymap.c b/layouts/community/ergodox/mpiechotka/keymap.c index 6a89e38a32..a83725519b 100644 --- a/layouts/community/ergodox/mpiechotka/keymap.c +++ b/layouts/community/ergodox/mpiechotka/keymap.c @@ -1,21 +1,20 @@ #include QMK_KEYBOARD_H -#include "debug.h" -#include "action_layer.h" + #include "keymap_colemak.h" -enum { +enum layer_names { BASE = 0, BASE_CM, SYMB, MACR }; -enum { - LWIN = 1, - PC1, - PC2, - PC3, - PC4 +enum custom_keycodes { + LWIN = SAFE_RANGE, + KC_PC1, + KC_PC2, + KC_PC3, + KC_PC4 }; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { @@ -50,7 +49,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_EQL, LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT, KC_RGHT, - KC_LALT, F(LWIN), + KC_LALT, LWIN, KC_HOME, SFT_T(KC_SPC),CTL_T(KC_BSPC),LT(SYMB, KC_END), // right hand @@ -94,7 +93,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_ESC, CM_A, CM_R, CM_S, CM_T, CM_D, KC_LSFT, CM_Z, CM_X, CM_C, CM_V, CM_B, KC_EQL, LT(SYMB,KC_GRV),KC_QUOT, LALT(KC_LSFT), KC_LEFT, KC_RGHT, - KC_LALT, F(LWIN), + KC_LALT, LWIN, KC_HOME, SFT_T(KC_SPC),CTL_T(KC_BSPC),LT(SYMB, KC_END), // right hand @@ -174,7 +173,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [MACR] = LAYOUT_ergodox( KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, DF(BASE), DF(BASE_CM), KC_NO, KC_NO, KC_NO, KC_NO, - KC_NO, F(PC1), F(PC2), F(PC3), F(PC4), KC_NO, + KC_NO, KC_PC1, KC_PC2, KC_PC3, KC_PC4, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TRNS,KC_TRNS, @@ -192,72 +191,60 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -const uint16_t PROGMEM fn_actions[] = { - [LWIN] = ACTION_MACRO(LWIN), - [PC1] = ACTION_MACRO(PC1), - [PC2] = ACTION_MACRO(PC2), - [PC3] = ACTION_MACRO(PC3), - [PC4] = ACTION_MACRO(PC4) -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - switch(id) { - case 0: - if (record->event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - case LWIN: - if (record->event.pressed) { - register_code(KC_RSFT); - unregister_code(KC_RSFT); - register_code(KC_LGUI); - } else { - unregister_code(KC_LGUI); - } - break; - case PC1: - if (!record->event.pressed) { - return MACRO(T(SLCK), W(50), T(SLCK), W(50), T(1), W(50), T(ENT), END); - } - break; - case PC2: - if (!record->event.pressed) { - return MACRO(T(SLCK), W(50), T(SLCK), W(50), T(2), W(50), T(ENT), END); - } - break; - case PC3: - if (!record->event.pressed) { - return MACRO(T(SLCK), W(50), T(SLCK), W(50), T(3), W(50), T(ENT), END); - } - break; - case PC4: - if (!record->event.pressed) { - return MACRO(T(SLCK), W(50), T(SLCK), W(50), T(4), W(50), T(ENT), END); - } - break; +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case LWIN: + if (record->event.pressed) { + tap_code(KC_RSFT); + register_code(KC_LGUI); + } else { + unregister_code(KC_LGUI); + } + return false; + case KC_PC1: + if (record->event.pressed) { + tap_code_delay(KC_SLCK, 50); + wait_ms(50); + tap_code_delay(KC_1, 50); + tap_code(KC_ENT); + } + return false; + case KC_PC2: + if (record->event.pressed) { + tap_code_delay(KC_SLCK, 50); + wait_ms(50); + tap_code_delay(KC_2, 50); + tap_code(KC_ENT); + } + return false; + case KC_PC3: + if (record->event.pressed) { + tap_code_delay(KC_SLCK, 50); + wait_ms(50); + tap_code_delay(KC_3, 50); + tap_code(KC_ENT); + } + return false; + case KC_PC4: + if (record->event.pressed) { + tap_code_delay(KC_SLCK, 50); + wait_ms(50); + tap_code_delay(KC_4, 50); + tap_code(KC_ENT); + } + return false; } - return MACRO_NONE; + return true; } -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { - - uint8_t layer = biton32(layer_state); - ergodox_board_led_off(); ergodox_right_led_1_off(); ergodox_right_led_2_off(); ergodox_right_led_3_off(); - switch (layer) { + + switch (get_highest_layer(layer_state)) { // TODO: Make this relevant to the ErgoDox EZ. case SYMB: ergodox_right_led_1_on(); @@ -269,4 +256,4 @@ void matrix_scan_user(void) { // none break; } -}; +} diff --git a/layouts/community/ergodox/ordinary/keymap.c b/layouts/community/ergodox/ordinary/keymap.c index 86ab864910..8d0425e49b 100644 --- a/layouts/community/ergodox/ordinary/keymap.c +++ b/layouts/community/ergodox/ordinary/keymap.c @@ -1,34 +1,12 @@ #include QMK_KEYBOARD_H -#include "led.h" -#include "mousekey.h" -#include "debug.h" -#include "action_layer.h" -#include "action_util.h" - -#define BASE 0 // default layer -#define SYMB 1 // symbols layer -#define MDIA 2 // media layer -#define SPEC 3 // special layer -#define RBASE 4 // reverse default layer - -#define LSymb 10 // left symbol-shift key -#define LMdia 11 // left media-shift key -#define LSpec 12 // left special-shift key -#define RSymb 13 // right symbol-shift key -#define RMdia 14 // right media-shift key -#define RSpec 15 // right special-shift key - -#define NotEq 16 // != macro -#define GrtEq 17 // >= macro -#define LesEq 18 // <= macro -#define DeRef 19 // -> macro - -#define MUL 20 // mouse up left -#define MUR 21 // mouse up right -#define MDL 22 // mouse down left -#define MDR 23 // mouse down right - +enum layer_names { + BASE, // default layer + SYMB, // symbols layer + MDIA, // media layer + SPEC, // special layer + RBASE // reverse default layer +}; /* * The Ordinary Layout for the Ergodox EZ keyboard, v5 @@ -69,18 +47,18 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [BASE] = LAYOUT_ergodox( // left hand - F(LSpec) ,KC_1 ,KC_2 ,KC_3 ,KC_4 ,KC_5 ,KC_ESC -,F(LMdia) ,KC_Q ,KC_W ,KC_E ,KC_R ,KC_T ,KC_LBRC -,M(LSymb) ,LT(RBASE, KC_A),KC_S ,KC_D ,LT(RBASE, KC_F) ,KC_G + KC_NO ,KC_1 ,KC_2 ,KC_3 ,KC_4 ,KC_5 ,KC_ESC +,KC_NO ,KC_Q ,KC_W ,KC_E ,KC_R ,KC_T ,KC_LBRC +,KC_NO ,LT(RBASE, KC_A),KC_S ,KC_D ,LT(RBASE, KC_F) ,KC_G ,KC_LSFT ,KC_Z ,KC_X ,KC_C ,KC_V ,KC_B ,LSFT(KC_TAB) ,KC_LCTL ,MEH_T(KC_NO) ,ALL_T(KC_NO),KC_LALT,KC_LGUI ,KC_HOME,KC_END ,KC_PGUP ,KC_BSPC,KC_DEL ,KC_PGDN // right hand - ,KC_MINS ,KC_6 ,KC_7 ,KC_8 ,KC_9 ,KC_0 ,F(RSpec) - ,KC_RBRC ,KC_Y ,KC_U ,KC_I ,KC_O ,KC_P ,F(RMdia) - ,KC_H ,LT(RBASE, KC_J),KC_K ,KC_L ,LT(RBASE,KC_SCLN),F(RSymb) + ,KC_MINS ,KC_6 ,KC_7 ,KC_8 ,KC_9 ,KC_0 ,KC_NO + ,KC_RBRC ,KC_Y ,KC_U ,KC_I ,KC_O ,KC_P ,KC_NO + ,KC_H ,LT(RBASE, KC_J),KC_K ,KC_L ,LT(RBASE,KC_SCLN),KC_NO ,KC_TAB ,KC_N ,KC_M ,KC_COMM,KC_DOT ,KC_SLSH ,KC_RSFT ,KC_RGUI ,KC_RALT,KC_HYPR,KC_MEH ,KC_RCTL ,KC_LEFT ,KC_RGHT @@ -116,9 +94,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ,KC_TRNS ,KC_HASH ,KC_DLR ,KC_LPRN ,KC_RPRN ,KC_GRV ,KC_TRNS ,KC_PERC ,KC_CIRC ,KC_LBRC ,KC_RBRC ,KC_TILD ,KC_QUOT ,KC_SCLN ,KC_AMPR ,KC_ASTR ,LSFT(KC_COMM),LSFT(KC_DOT) - ,M(GrtEq),M(LesEq) + ,KC_NO,KC_NO ,KC_NO - ,KC_PLUS ,KC_EQL ,M(NotEq) + ,KC_PLUS ,KC_EQL ,KC_NO // right hand ,KC_MINS ,KC_F6 ,KC_F7 ,KC_F8 ,KC_F9 ,KC_F10 ,KC_TRNS ,LSFT(KC_DOT),KC_PIPE ,KC_7 ,KC_8 ,KC_9 ,KC_SLSH ,KC_TRNS @@ -127,7 +105,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ,KC_0 ,KC_DOT ,KC_EQL,KC_PLUS ,KC_ENT ,KC_NO ,KC_NO ,KC_NO - ,M(DeRef) ,LSFT(KC_MINS),KC_MINS + ,KC_NO ,LSFT(KC_MINS),KC_MINS ), /******* Media Layer ******************************************************************************************************* @@ -154,9 +132,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [MDIA] = LAYOUT_ergodox( // left hand KC_TRNS ,KC_F11 ,KC_F12 ,KC_F13 ,KC_F14 ,KC_F15 ,KC_ESC -,KC_TRNS ,KC_POWER ,M(MUL) ,KC_MS_U ,M(MUR) ,KC_VOLU ,KC_WH_U +,KC_TRNS ,KC_POWER ,KC_NO ,KC_MS_U ,KC_NO ,KC_VOLU ,KC_WH_U ,KC_TRNS ,KC_SLEP ,KC_MS_L ,KC_MS_D ,KC_MS_R ,KC_VOLD -,KC_TRNS ,KC_NO ,M(MDL) ,KC_MS_D ,M(MDR) ,KC_MUTE ,KC_WH_D +,KC_TRNS ,KC_NO ,KC_NO ,KC_MS_D ,KC_NO ,KC_MUTE ,KC_WH_D ,KC_NO ,KC_NO ,KC_BTN3 ,KC_BTN1 ,KC_BTN2 ,KC_WSTP ,KC_WREF ,KC_WSCH @@ -257,248 +235,26 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ) }; -const uint16_t PROGMEM fn_actions[] = { - // the faux shift keys are implemented as macro taps - [LSymb] = ACTION_MACRO_TAP(LSymb) - ,[LMdia] = ACTION_MACRO_TAP(LMdia) - ,[LSpec] = ACTION_MACRO_TAP(LSpec) - ,[RSymb] = ACTION_MACRO_TAP(RSymb) - ,[RMdia] = ACTION_MACRO_TAP(RMdia) - ,[RSpec] = ACTION_MACRO_TAP(RSpec) -}; - -uint16_t symb_shift = 0; -uint16_t mdia_shift = 0; -uint16_t spec_shift = 0; - -bool mdia_lock = false; -bool symb_lock = false; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - switch(id) { - // There are two shift keys for each layer so we increment a layer_shift var when one - // is pressed and decrement when one is released. The shift counts are bound between 0 and 2 - // only because sometimes rapid pressing led to irregular events; this way the states - // are self healing during use. - - case LSymb: // - if (record->event.pressed) { // when the LSymb button is pressed - if(++symb_shift > 2) symb_shift = 2; // increment the symb shift count, max two - if(spec_shift) symb_lock = !symb_lock; // if the Special layer is on, toggle the shift lock - layer_on(SYMB); // in any case, turn on the Symbols layer - } else { // when the LSymb button is released - if(--symb_shift < 0) symb_shift = 0; // decrement the shift count, minimum zero - if((!symb_shift) && (!symb_lock)) layer_off(SYMB); // if both shifts are released and the lock is off, turn off the Symbols layer - } - break; - - case LMdia: - if (record->event.pressed) { - if (record->tap.count && (!mdia_shift) && (!mdia_lock) && (!spec_shift)) { - register_code(KC_TAB); - } else { - if(spec_shift) mdia_lock = !mdia_lock; - if(++mdia_shift > 2) mdia_shift = 2; - layer_on(MDIA); - } - } else { - if(record->tap.count && (!mdia_shift) && (!mdia_lock) && (!spec_shift)) { - unregister_code(KC_TAB); - } else { - if(--mdia_shift < 0) mdia_shift = 0; - if((!mdia_shift) && (!mdia_lock)) layer_off(MDIA); - } - } - break; - - case LSpec: - if (record->event.pressed) { // when the LSpec button is pressed - if(symb_shift) symb_lock = !symb_lock; // if another layer button is engaged, then - else if(mdia_shift) mdia_lock = !mdia_lock; // lock that layer, be it caps or symb or mdia - else if (record->tap.count && !record->tap.interrupted && (!spec_shift)) { - register_code(KC_GRV); // otherwise, if it's an uninterrupted tap, emit a char - } else { - if(++spec_shift > 2) spec_shift = 2; - layer_on(SPEC); // otherwise, turn on the Special layer - } - } else { - if(record->tap.count && !record->tap.interrupted && (!spec_shift)) { - unregister_code(KC_GRV); - } else { - if(--spec_shift < 0) spec_shift = 0; - if(!spec_shift) layer_off(SPEC); - } - } - break; - - case RSymb: - if (record->event.pressed) { - if (record->tap.count && (!symb_shift) && (!symb_lock) && (!spec_shift)) { - register_code(KC_QUOT); - } else { - if(++symb_shift > 2) symb_shift = 2; - if(spec_shift) symb_lock = !symb_lock; - layer_on(SYMB); - } - } else { - if(record->tap.count && (!symb_shift) && (!symb_lock) && (!spec_shift)) { - unregister_code(KC_QUOT); - } else { - if(--symb_shift < 0) symb_shift = 0; - if((!symb_shift) && (!symb_lock)) layer_off(SYMB); - } - } - break; - - case RMdia: - if (record->event.pressed) { - if (record->tap.count && (!mdia_shift) && (!mdia_lock) && (!spec_shift)) { - register_code(KC_BSLS); - } else { - if(++mdia_shift > 2) mdia_shift = 2; - if(spec_shift) mdia_lock = !mdia_lock; - layer_on(MDIA); - } - } else { - if(record->tap.count && (!mdia_shift) && (!mdia_lock) && (!spec_shift)) { - unregister_code(KC_BSLS); - } else { - if(--mdia_shift < 0) mdia_shift = 0; - if((!mdia_shift) && (!mdia_lock)) layer_off(MDIA); - } - } - break; - - case RSpec: - if (record->event.pressed) { - if(symb_shift) symb_lock = !symb_lock; - else if(mdia_shift) mdia_lock = !mdia_lock; - else if (record->tap.count && !record->tap.interrupted && (!spec_shift)) { - register_code(KC_EQL); - } else { - if(++spec_shift > 2) spec_shift = 2; - layer_on(SPEC); - } - } else { - if(record->tap.count && !record->tap.interrupted && (!spec_shift)) { - unregister_code(KC_EQL); - } else { - if(--spec_shift < 0) spec_shift = 0; - if(!spec_shift) layer_off(SPEC); - } - } - break; - - case NotEq: - if (record->event.pressed) { - return MACRO( I(10), D(LSFT), T(1), U(LSFT), T(EQL), END ); // != - } - break; - - case GrtEq: - if (record->event.pressed) { - return MACRO( I(10), D(LSFT), T(COMM), U(LSFT), T(EQL), END ); // <= - } - break; - - case LesEq: - if (record->event.pressed) { - return MACRO( I(10), D(LSFT), T(DOT), U(LSFT), T(EQL), END ); // >= - } - break; - - case DeRef: - if (record->event.pressed) { - return MACRO( I(10), T(MINS), D(LSFT), T(DOT), U(LSFT), END ); // -> - } - break; - - // mouse diagonals - - case MUL: // mouse up left - if (record->event.pressed) { - mousekey_on(KC_MS_UP); - mousekey_on(KC_MS_LEFT); - mousekey_send(); - } else { - mousekey_off(KC_MS_UP); - mousekey_off(KC_MS_LEFT); - mousekey_send(); - } - break; - - case MUR: // mouse up right - if (record->event.pressed) { - mousekey_on(KC_MS_UP); - mousekey_on(KC_MS_RIGHT); - mousekey_send(); - } else { - mousekey_off(KC_MS_UP); - mousekey_off(KC_MS_RIGHT); - mousekey_send(); - } - break; - - case MDL: // mouse down left - if (record->event.pressed) { - mousekey_on(KC_MS_DOWN); - mousekey_on(KC_MS_LEFT); - mousekey_send(); - } else { - mousekey_off(KC_MS_DOWN); - mousekey_off(KC_MS_LEFT); - mousekey_send(); - } - break; - - case MDR: // mouse down right - if (record->event.pressed) { - mousekey_on(KC_MS_DOWN); - mousekey_on(KC_MS_RIGHT); - mousekey_send(); - } else { - mousekey_off(KC_MS_DOWN); - mousekey_off(KC_MS_RIGHT); - mousekey_send(); - } - break; - - default: - // none - break; - } - - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { // shift or caps lock turns on red light - if((keyboard_report->mods & MOD_BIT(KC_LSFT)) - || (keyboard_report->mods & MOD_BIT(KC_RSFT)) - || (host_keyboard_leds() & (1<mods & MOD_BIT(KC_LSFT)) || (keyboard_report->mods & MOD_BIT(KC_RSFT)) || (host_keyboard_leds() & (1<= macro -#define LesEq 18 // <= macro -#define DeRef 19 // -> macro - -#define MUL 20 // mouse up left -#define MUR 21 // mouse up right -#define MDL 22 // mouse down left -#define MDR 23 // mouse down right - +enum layer_names { + BASE, // default layer + SYMB, // symbols layer + MDIA, // media layer + SPEC, // special layer + RBASE // reverse default layer +}; /* * The Ordinary Layout for the Ergodox EZ keyboard, v5 @@ -69,18 +47,18 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [BASE] = LAYOUT_ergodox( // left hand - F(LSpec) ,KC_1 ,KC_2 ,KC_3 ,KC_4 ,KC_5 ,KC_ESC -,F(LMdia) ,KC_Q ,KC_W ,KC_E ,KC_R ,KC_T ,LSFT(KC_TAB) -,M(LSymb) ,LT(RBASE, KC_A),KC_S ,KC_D ,LT(RBASE, KC_F) ,KC_G + KC_NO ,KC_1 ,KC_2 ,KC_3 ,KC_4 ,KC_5 ,KC_ESC +,KC_NO ,KC_Q ,KC_W ,KC_E ,KC_R ,KC_T ,LSFT(KC_TAB) +,KC_NO ,LT(RBASE, KC_A),KC_S ,KC_D ,LT(RBASE, KC_F) ,KC_G ,KC_LSFT ,KC_Z ,KC_X ,KC_C ,KC_V ,KC_B ,KC_LBRC ,KC_LEFT ,KC_RIGHT ,KC_LCTL,KC_LALT,KC_LGUI ,KC_HOME,KC_END ,KC_PGUP ,KC_BSPC,KC_DEL ,KC_PGDN // right hand - ,KC_MINS ,KC_6 ,KC_7 ,KC_8 ,KC_9 ,KC_0 ,F(RSpec) - ,KC_TAB ,KC_Y ,KC_U ,KC_I ,KC_O ,KC_P ,F(RMdia) - ,KC_H ,LT(RBASE, KC_J),KC_K ,KC_L ,LT(RBASE,KC_SCLN),F(RSymb) + ,KC_MINS ,KC_6 ,KC_7 ,KC_8 ,KC_9 ,KC_0 ,KC_NO + ,KC_TAB ,KC_Y ,KC_U ,KC_I ,KC_O ,KC_P ,KC_NO + ,KC_H ,LT(RBASE, KC_J),KC_K ,KC_L ,LT(RBASE,KC_SCLN),KC_NO ,KC_RBRC ,KC_N ,KC_M ,KC_COMM,KC_DOT ,KC_SLSH ,KC_RSFT ,KC_RGUI ,KC_RALT,KC_RCTL,KC_UP ,KC_DOWN ,KC_LEFT ,KC_RGHT @@ -116,9 +94,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ,KC_TRNS ,KC_HASH ,KC_DLR ,KC_LPRN ,KC_RPRN ,KC_GRV ,KC_TRNS ,KC_PERC ,KC_CIRC ,KC_LBRC ,KC_RBRC ,KC_TILD ,KC_QUOT ,KC_SCLN ,KC_AMPR ,KC_ASTR ,LSFT(KC_COMM),LSFT(KC_DOT) - ,M(GrtEq),M(LesEq) + ,KC_NO,KC_NO ,KC_NO - ,KC_PLUS ,KC_EQL ,M(NotEq) + ,KC_PLUS ,KC_EQL ,KC_NO // right hand ,KC_MINS ,KC_F6 ,KC_F7 ,KC_F8 ,KC_F9 ,KC_F10 ,KC_TRNS ,LSFT(KC_DOT),KC_PIPE ,KC_7 ,KC_8 ,KC_9 ,KC_SLSH ,KC_TRNS @@ -127,7 +105,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ,KC_0 ,KC_DOT ,KC_EQL,KC_PLUS ,KC_ENT ,KC_NO ,KC_NO ,KC_NO - ,M(DeRef) ,LSFT(KC_MINS),KC_MINS + ,KC_NO ,LSFT(KC_MINS),KC_MINS ), /******* Media Layer ******************************************************************************************************* @@ -154,9 +132,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [MDIA] = LAYOUT_ergodox( // left hand KC_TRNS ,KC_F11 ,KC_F12 ,KC_F13 ,KC_F14 ,KC_F15 ,KC_ESC -,KC_TRNS ,KC_POWER ,M(MUL) ,KC_MS_U ,M(MUR) ,KC_VOLU ,KC_WH_U +,KC_TRNS ,KC_POWER ,KC_NO ,KC_MS_U ,KC_NO ,KC_VOLU ,KC_WH_U ,KC_TRNS ,KC_SLEP ,KC_MS_L ,KC_MS_D ,KC_MS_R ,KC_VOLD -,KC_TRNS ,KC_NO ,M(MDL) ,KC_MS_D ,M(MDR) ,KC_MUTE ,KC_WH_D +,KC_TRNS ,KC_NO ,KC_NO ,KC_MS_D ,KC_NO ,KC_MUTE ,KC_WH_D ,KC_NO ,KC_NO ,KC_BTN3 ,KC_BTN1 ,KC_BTN2 ,KC_WSTP ,KC_WREF ,KC_WSCH @@ -257,248 +235,26 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ) }; -const uint16_t PROGMEM fn_actions[] = { - // the faux shift keys are implemented as macro taps - [LSymb] = ACTION_MACRO_TAP(LSymb) - ,[LMdia] = ACTION_MACRO_TAP(LMdia) - ,[LSpec] = ACTION_MACRO_TAP(LSpec) - ,[RSymb] = ACTION_MACRO_TAP(RSymb) - ,[RMdia] = ACTION_MACRO_TAP(RMdia) - ,[RSpec] = ACTION_MACRO_TAP(RSpec) -}; - -uint16_t symb_shift = 0; -uint16_t mdia_shift = 0; -uint16_t spec_shift = 0; - -bool mdia_lock = false; -bool symb_lock = false; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - switch(id) { - // There are two shift keys for each layer so we increment a layer_shift var when one - // is pressed and decrement when one is released. The shift counts are bound between 0 and 2 - // only because sometimes rapid pressing led to irregular events; this way the states - // are self healing during use. - - case LSymb: // - if (record->event.pressed) { // when the LSymb button is pressed - if(++symb_shift > 2) symb_shift = 2; // increment the symb shift count, max two - if(spec_shift) symb_lock = !symb_lock; // if the Special layer is on, toggle the shift lock - layer_on(SYMB); // in any case, turn on the Symbols layer - } else { // when the LSymb button is released - if(--symb_shift < 0) symb_shift = 0; // decrement the shift count, minimum zero - if((!symb_shift) && (!symb_lock)) layer_off(SYMB); // if both shifts are released and the lock is off, turn off the Symbols layer - } - break; - - case LMdia: - if (record->event.pressed) { - if (record->tap.count && (!mdia_shift) && (!mdia_lock) && (!spec_shift)) { - register_code(KC_TAB); - } else { - if(spec_shift) mdia_lock = !mdia_lock; - if(++mdia_shift > 2) mdia_shift = 2; - layer_on(MDIA); - } - } else { - if(record->tap.count && (!mdia_shift) && (!mdia_lock) && (!spec_shift)) { - unregister_code(KC_TAB); - } else { - if(--mdia_shift < 0) mdia_shift = 0; - if((!mdia_shift) && (!mdia_lock)) layer_off(MDIA); - } - } - break; - - case LSpec: - if (record->event.pressed) { // when the LSpec button is pressed - if(symb_shift) symb_lock = !symb_lock; // if another layer button is engaged, then - else if(mdia_shift) mdia_lock = !mdia_lock; // lock that layer, be it caps or symb or mdia - else if (record->tap.count && !record->tap.interrupted && (!spec_shift)) { - register_code(KC_GRV); // otherwise, if it's an uninterrupted tap, emit a char - } else { - if(++spec_shift > 2) spec_shift = 2; - layer_on(SPEC); // otherwise, turn on the Special layer - } - } else { - if(record->tap.count && !record->tap.interrupted && (!spec_shift)) { - unregister_code(KC_GRV); - } else { - if(--spec_shift < 0) spec_shift = 0; - if(!spec_shift) layer_off(SPEC); - } - } - break; - - case RSymb: - if (record->event.pressed) { - if (record->tap.count && (!symb_shift) && (!symb_lock) && (!spec_shift)) { - register_code(KC_QUOT); - } else { - if(++symb_shift > 2) symb_shift = 2; - if(spec_shift) symb_lock = !symb_lock; - layer_on(SYMB); - } - } else { - if(record->tap.count && (!symb_shift) && (!symb_lock) && (!spec_shift)) { - unregister_code(KC_QUOT); - } else { - if(--symb_shift < 0) symb_shift = 0; - if((!symb_shift) && (!symb_lock)) layer_off(SYMB); - } - } - break; - - case RMdia: - if (record->event.pressed) { - if (record->tap.count && (!mdia_shift) && (!mdia_lock) && (!spec_shift)) { - register_code(KC_BSLS); - } else { - if(++mdia_shift > 2) mdia_shift = 2; - if(spec_shift) mdia_lock = !mdia_lock; - layer_on(MDIA); - } - } else { - if(record->tap.count && (!mdia_shift) && (!mdia_lock) && (!spec_shift)) { - unregister_code(KC_BSLS); - } else { - if(--mdia_shift < 0) mdia_shift = 0; - if((!mdia_shift) && (!mdia_lock)) layer_off(MDIA); - } - } - break; - - case RSpec: - if (record->event.pressed) { - if(symb_shift) symb_lock = !symb_lock; - else if(mdia_shift) mdia_lock = !mdia_lock; - else if (record->tap.count && !record->tap.interrupted && (!spec_shift)) { - register_code(KC_EQL); - } else { - if(++spec_shift > 2) spec_shift = 2; - layer_on(SPEC); - } - } else { - if(record->tap.count && !record->tap.interrupted && (!spec_shift)) { - unregister_code(KC_EQL); - } else { - if(--spec_shift < 0) spec_shift = 0; - if(!spec_shift) layer_off(SPEC); - } - } - break; - - case NotEq: - if (record->event.pressed) { - return MACRO( I(10), D(LSFT), T(1), U(LSFT), T(EQL), END ); // != - } - break; - - case GrtEq: - if (record->event.pressed) { - return MACRO( I(10), D(LSFT), T(COMM), U(LSFT), T(EQL), END ); // <= - } - break; - - case LesEq: - if (record->event.pressed) { - return MACRO( I(10), D(LSFT), T(DOT), U(LSFT), T(EQL), END ); // >= - } - break; - - case DeRef: - if (record->event.pressed) { - return MACRO( I(10), T(MINS), D(LSFT), T(DOT), U(LSFT), END ); // -> - } - break; - - // mouse diagonals - - case MUL: // mouse up left - if (record->event.pressed) { - mousekey_on(KC_MS_UP); - mousekey_on(KC_MS_LEFT); - mousekey_send(); - } else { - mousekey_off(KC_MS_UP); - mousekey_off(KC_MS_LEFT); - mousekey_send(); - } - break; - - case MUR: // mouse up right - if (record->event.pressed) { - mousekey_on(KC_MS_UP); - mousekey_on(KC_MS_RIGHT); - mousekey_send(); - } else { - mousekey_off(KC_MS_UP); - mousekey_off(KC_MS_RIGHT); - mousekey_send(); - } - break; - - case MDL: // mouse down left - if (record->event.pressed) { - mousekey_on(KC_MS_DOWN); - mousekey_on(KC_MS_LEFT); - mousekey_send(); - } else { - mousekey_off(KC_MS_DOWN); - mousekey_off(KC_MS_LEFT); - mousekey_send(); - } - break; - - case MDR: // mouse down right - if (record->event.pressed) { - mousekey_on(KC_MS_DOWN); - mousekey_on(KC_MS_RIGHT); - mousekey_send(); - } else { - mousekey_off(KC_MS_DOWN); - mousekey_off(KC_MS_RIGHT); - mousekey_send(); - } - break; - - default: - // none - break; - } - - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { // shift or caps lock turns on red light - if((keyboard_report->mods & MOD_BIT(KC_LSFT)) - || (keyboard_report->mods & MOD_BIT(KC_RSFT)) - || (host_keyboard_leds() & (1<mods & MOD_BIT(KC_LSFT)) || (keyboard_report->mods & MOD_BIT(KC_RSFT)) || (host_keyboard_leds() & (1<event.pressed) { - // Toggle caps state; - if (caps_state == OFF) { - // Turn it on then! - caps_led_on(); - caps_state = ON; - } else { - caps_led_off(); - caps_state = OFF; - } - } - break; - default: - if (record->event.pressed) { - bool shifted = false; - if (caps_state == ON && get_mods() == 0) { - register_code(KC_LSFT); - shifted = true; - } - register_code(id); - if(shifted) { - unregister_code(KC_LSFT); - } - } else { - unregister_code(id); - } - break; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -} // Runs constantly in the background, in a loop. void matrix_scan_user(void) { - uint8_t layer = biton32(layer_state); + uint8_t layer = get_highest_layer(layer_state); static onoff board_led_state = OFF; static uint16_t dt = 0; static uint8_t oldlayer = 0; - if(oldlayer != layer) { + if (oldlayer != layer) { // Layer was just toggled. - if(layer == BASE) { + if (layer == BASE) { ergodox_board_led_off(); board_led_state = OFF; } else { @@ -213,10 +162,10 @@ void matrix_scan_user(void) { } } else if (layer >= MDIA) { // We need to do blinking. - if(timer_elapsed(dt) > BLINK_BASE) { + if (timer_elapsed(dt) > BLINK_BASE) { // toggle dt = timer_read(); - if(board_led_state == OFF) { + if (board_led_state == OFF) { ergodox_board_led_on(); board_led_state = ON; } else { diff --git a/layouts/community/ergodox/plover/keymap.c b/layouts/community/ergodox/plover/keymap.c index b196346436..ffb869309a 100644 --- a/layouts/community/ergodox/plover/keymap.c +++ b/layouts/community/ergodox/plover/keymap.c @@ -164,7 +164,7 @@ LAYOUT_ergodox( KC_NO, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_NO, KC_A, KC_S, KC_D, KC_F, KC_G, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - KC_FN4, KC_NO, + KC_NO, KC_NO, KC_NO, KC_C, KC_V, KC_NO, // right hand diff --git a/layouts/community/ergodox/plums/keymap.c b/layouts/community/ergodox/plums/keymap.c index c75ce0f977..dd273e579b 100644 --- a/layouts/community/ergodox/plums/keymap.c +++ b/layouts/community/ergodox/plums/keymap.c @@ -1,6 +1,4 @@ #include QMK_KEYBOARD_H -#include "debug.h" -#include "action_layer.h" #define BASE 0 // default layer #define SYMB 1 // symbols @@ -36,7 +34,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_LBRC, KC_LGUI, KC_A, KC_S, KC_D, KC_F, KC_G, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, TG(SYMB), - F(0), KC_LCBR, KC_LPRN,KC_PIPE,KC_COLN, + KC_NO, KC_LCBR, KC_LPRN,KC_PIPE,KC_COLN, LGUI(KC_LALT), KC_LALT, KC_HOME, KC_BSPC, KC_ESC, KC_END, @@ -45,7 +43,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_RBRC, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, TG(MDIA), KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, - KC_MINS, KC_EQL, KC_RPRN, KC_RCBR, F(1), + KC_MINS, KC_EQL, KC_RPRN, KC_RCBR, KC_NO, KC_RALT, KC_MPLY, KC_PGUP, KC_PGDN, KC_ENT, KC_SPC @@ -135,85 +133,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), }; -const uint16_t PROGMEM fn_actions[] = { - [0] = ACTION_MACRO_TAP(0), // FN0 - Ctrl + a (For screen/tmux) - [1] = ACTION_MACRO_TAP(1) // FN1 - Ctrl + ` (For quake style console) -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) // this is the function signature -- just copy/paste it into your keymap file as it is. -{ - switch(id) { - case 0: - if (record->event.pressed) { - if (record->tap.count) { - if (record->tap.interrupted) { - record->tap.count = 0; - // hold press action - register_code(KC_LCTL); - } else { - // tap press action - return MACRO( D(LCTL), T(A), U(LCTL), END ); - } - } else { - // hold press action - register_code(KC_LCTL); - } - } else { - if (record->tap.count) { - // tap release action - } else { - // hold release action - unregister_code(KC_LCTL); - } - record->tap.count = 0; - } - break; - case 1: - if (record->event.pressed) { - if (record->tap.count) { - if (record->tap.interrupted) { - record->tap.count = 0; - // hold press action - register_code(KC_RCTL); - } else { - // tap press action - return MACRO( DOWN(KC_RCTL), TYPE(KC_GRV), UP(KC_RCTL), END ); - } - } else { - // hold press action - register_code(KC_RCTL); - } - } else { - if (record->tap.count) { - // tap release action - } else { - // hold release action - unregister_code(KC_RCTL); - } - record->tap.count = 0; - } - break; - } - return MACRO_NONE; -}; - - - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { - - uint8_t layer = biton32(layer_state); - ergodox_board_led_off(); ergodox_right_led_1_off(); ergodox_right_led_2_off(); ergodox_right_led_3_off(); - switch (layer) { + + switch (get_highest_layer(layer_state)) { // TODO: Make this relevant to the ErgoDox EZ. case 1: ergodox_right_led_1_on(); @@ -225,5 +152,4 @@ void matrix_scan_user(void) { // none break; } - -}; +} diff --git a/layouts/community/ergodox/teckinesis/keymap.c b/layouts/community/ergodox/teckinesis/keymap.c index 0b65572f68..509b91af90 100644 --- a/layouts/community/ergodox/teckinesis/keymap.c +++ b/layouts/community/ergodox/teckinesis/keymap.c @@ -1,28 +1,11 @@ #include QMK_KEYBOARD_H -#include "led.h" -#include "debug.h" -#include "action_layer.h" -#include "action_util.h" -#include "mousekey.h" -#define BASE 0 // default layer -#define SYMB 1 // symbols layer -#define MDIA 2 // media layer -#define SPEC 3 // special layer - -#define LCaps 10 // left caps-shift key -#define LSymb 11 // left symbol-shift key -#define LMdia 12 // left media-shift key -#define LSpec 13 // left special-shift key -#define RCaps 14 // right caps-shift key -#define RSymb 15 // right symbol-shift key -#define RMdia 16 // right media-shift key -#define RSpec 17 // right special-shift key - -#define MUL 20 // mouse up left -#define MUR 21 // mouse up right -#define MDL 22 // mouse down left -#define MDR 23 // mouse down right +enum layer_names { + BASE, // default layer + SYMB, // symbols layer + MDIA, // media layer + SPEC // special layer +}; /* * teckinesis layout for ErgoDox (EZ) @@ -62,19 +45,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [BASE] = LAYOUT_ergodox( // left hand - F(LSpec),KC_1,KC_2,KC_3 ,KC_4 ,KC_5 ,KC_ESC -,F(LMdia) ,KC_Q ,KC_W ,KC_E ,KC_R ,KC_T ,KC_LBRC -,M(LSymb) ,KC_A ,KC_S ,KC_D ,KC_F ,KC_G -,M(LCaps) ,KC_Z ,KC_X ,KC_C ,KC_V ,KC_B ,LSFT(KC_TAB) + KC_NO ,KC_1,KC_2,KC_3 ,KC_4 ,KC_5 ,KC_ESC +,KC_NO ,KC_Q ,KC_W ,KC_E ,KC_R ,KC_T ,KC_LBRC +,KC_NO ,KC_A ,KC_S ,KC_D ,KC_F ,KC_G +,KC_NO ,KC_Z ,KC_X ,KC_C ,KC_V ,KC_B ,LSFT(KC_TAB) ,KC_LCTL,MEH_T(KC_BSLS),ALL_T(KC_SLSH),KC_LALT,KC_LGUI ,KC_HOME,KC_END ,KC_PGUP ,KC_BSPC,KC_DEL ,KC_PGDN // right hand - ,KC_GRV ,KC_6 ,KC_7 ,KC_8 ,KC_9 ,KC_0 ,F(RSpec) - ,KC_RBRC ,KC_Y ,KC_U ,KC_I ,KC_O ,KC_P ,F(RMdia) - ,KC_H ,KC_J ,KC_K ,KC_L ,KC_SCLN ,F(RSymb) - ,KC_TAB ,KC_N ,KC_M ,KC_COMM,KC_DOT ,KC_SLSH ,M(RCaps) + ,KC_GRV ,KC_6 ,KC_7 ,KC_8 ,KC_9 ,KC_0 ,KC_NO + ,KC_RBRC ,KC_Y ,KC_U ,KC_I ,KC_O ,KC_P ,KC_NO + ,KC_H ,KC_J ,KC_K ,KC_L ,KC_SCLN ,KC_NO + ,KC_TAB ,KC_N ,KC_M ,KC_COMM,KC_DOT ,KC_SLSH ,KC_NO ,KC_RGUI,KC_RALT,ALL_T(KC_LBRC),MEH_T(KC_RBRC),KC_RCTL ,KC_LEFT ,KC_RGHT ,KC_UP @@ -147,9 +130,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [MDIA] = LAYOUT_ergodox( // left hand KC_TRNS ,KC_F11 ,KC_F12 ,KC_F13 ,KC_F14 ,KC_F15 ,KC_ESC -,KC_TRNS ,KC_NO ,M(MUL) ,KC_MS_U ,M(MUR) ,KC_VOLU ,KC_WH_U +,KC_TRNS ,KC_NO ,KC_NO ,KC_MS_U ,KC_NO ,KC_VOLU ,KC_WH_U ,KC_TRNS ,KC_NO ,KC_MS_L ,KC_MS_D ,KC_MS_R ,KC_VOLD -,KC_TRNS ,KC_NO ,M(MDL) ,KC_MS_D ,M(MDR) ,KC_MUTE ,KC_WH_D +,KC_TRNS ,KC_NO ,KC_NO ,KC_MS_D ,KC_NO ,KC_MUTE ,KC_WH_D ,KC_LCTL ,KC_MEH ,KC_BTN3 ,KC_BTN1 ,KC_BTN2 ,KC_WSTP ,KC_WREF ,KC_WSCH @@ -210,246 +193,26 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ) }; -const uint16_t PROGMEM fn_actions[] = { - // the faux shift keys are implemented as macro taps - [LCaps] = ACTION_MACRO_TAP(LCaps) - ,[LSymb] = ACTION_MACRO_TAP(LSymb) - ,[LMdia] = ACTION_MACRO_TAP(LMdia) - ,[LSpec] = ACTION_MACRO_TAP(LSpec) - ,[RCaps] = ACTION_MACRO_TAP(RCaps) - ,[RSymb] = ACTION_MACRO_TAP(RSymb) - ,[RMdia] = ACTION_MACRO_TAP(RMdia) - ,[RSpec] = ACTION_MACRO_TAP(RSpec) -}; - -uint16_t caps_shift = 0; -uint16_t symb_shift = 0; -uint16_t mdia_shift = 0; - -bool symb_lock = false; -bool mdia_lock = false; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - switch(id) { - // There are two shift keys for each layer so we increment a layer_shift var when one - // is pressed and decrement when one is released. If both are pressed at the same time - // then the layer is locked (or unlocked). The shift counts are bound between 0 and 2 - // only because sometimes rapid pressing led to irregular events; this way the states - // are self healing during use. - - case LCaps: // both caps-shift keys trigger Left Shift - case RCaps: // so they don't interfere with the magic combo - if (record->event.pressed && !record->tap.count) { - if(++caps_shift > 2) caps_shift = 2; - if(caps_shift == 2) { - register_code(KC_CAPS); - unregister_code(KC_CAPS); - } else if(caps_shift == 1) { - register_code(KC_LSFT); - } - } else { - if(--caps_shift < 0) caps_shift = 0; - if(caps_shift == 0) unregister_code(KC_LSFT); - } - break; - - case LSymb: - if (record->event.pressed) { - if(++symb_shift > 2) symb_shift = 2; - if(symb_shift == 2) { - symb_lock = !symb_lock; - } else if(symb_shift == 1) { - layer_on(SYMB); - } - } else { - if(--symb_shift < 0) symb_shift = 0; - if((symb_shift == 0) && (!symb_lock)) layer_off(SYMB); - } - break; - - case LMdia: - if (record->event.pressed) { - if (record->tap.count && (!mdia_shift) && (!mdia_lock)) { - register_code(KC_TAB); - } else { - if(++mdia_shift > 2) mdia_shift = 2; - if(mdia_shift == 2) { - mdia_lock = !mdia_lock; - } else if(mdia_shift == 1) { - layer_on(MDIA); - } - } - } else { - if(record->tap.count && (!mdia_shift) && (!mdia_lock)) { - unregister_code(KC_TAB); - } else { - if(--mdia_shift < 0) mdia_shift = 0; - if((!mdia_shift) && (!mdia_lock)) layer_off(MDIA); - } - } - break; - - case LSpec: - if (record->event.pressed) { - if (record->tap.count && !record->tap.interrupted) { - register_code(KC_EQL); - } else { - layer_on(SPEC); - } - } else { - if(record->tap.count && !record->tap.interrupted) { - unregister_code(KC_EQL); - } else { - layer_off(SPEC); - } - } - break; - - case RSymb: - if (record->event.pressed) { - if (record->tap.count && (!symb_shift) && (!symb_lock)) { - register_code(KC_QUOT); - } else { - if(++symb_shift > 2) symb_shift = 2; - if(symb_shift == 2) { - symb_lock = !symb_lock; - } else if(symb_shift == 1) { - layer_on(SYMB); - } - } - } else { - if(record->tap.count && symb_shift == 0) { - unregister_code(KC_QUOT); - } else { - if(--symb_shift < 0) symb_shift = 0; - if((!symb_shift) && (!symb_lock)) layer_off(SYMB); - } - } - break; - - case RMdia: - if (record->event.pressed) { - if (record->tap.count && (!mdia_shift) && (!mdia_lock)) { - register_code(KC_BSLS); - } else { - if(++mdia_shift > 2) mdia_shift = 2; - if(mdia_shift == 2) { - mdia_lock = !mdia_lock; - } else if(mdia_shift == 1) { - layer_on(MDIA); - } - } - } else { - if(record->tap.count && (!mdia_shift) && (!mdia_lock)) { - unregister_code(KC_BSLS); - } else { - if(--mdia_shift < 0) mdia_shift = 0; - if((!mdia_shift) && (!mdia_lock)) layer_off(MDIA); - } - } - break; - - case RSpec: - if (record->event.pressed) { - if (record->tap.count && !record->tap.interrupted) { - register_code(KC_MINS); - } else { - layer_on(SPEC); - } - } else { - if(record->tap.count && !record->tap.interrupted) { - unregister_code(KC_MINS); - } else { - layer_off(SPEC); - } - } - break; - - // mouse diagonals - - case MUL: // mouse up left - if (record->event.pressed) { - mousekey_on(KC_MS_UP); - mousekey_on(KC_MS_LEFT); - mousekey_send(); - } else { - mousekey_off(KC_MS_UP); - mousekey_off(KC_MS_LEFT); - mousekey_send(); - } - break; - - case MUR: // mouse up right - if (record->event.pressed) { - mousekey_on(KC_MS_UP); - mousekey_on(KC_MS_RIGHT); - mousekey_send(); - } else { - mousekey_off(KC_MS_UP); - mousekey_off(KC_MS_RIGHT); - mousekey_send(); - } - break; - - case MDL: // mouse down left - if (record->event.pressed) { - mousekey_on(KC_MS_DOWN); - mousekey_on(KC_MS_LEFT); - mousekey_send(); - } else { - mousekey_off(KC_MS_DOWN); - mousekey_off(KC_MS_LEFT); - mousekey_send(); - } - break; - - case MDR: // mouse down right - if (record->event.pressed) { - mousekey_on(KC_MS_DOWN); - mousekey_on(KC_MS_RIGHT); - mousekey_send(); - } else { - mousekey_off(KC_MS_DOWN); - mousekey_off(KC_MS_RIGHT); - mousekey_send(); - } - break; - - default: - // none - break; - } - - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { - -}; - // Runs constantly in the background, in a loop. void matrix_scan_user(void) { // shift or caps lock turns on red light - if(caps_shift || (keyboard_report->mods & MOD_BIT(KC_RSFT)) || (host_keyboard_leds() & (1<mods & MOD_BIT(KC_RSFT)) || (host_keyboard_led_state().caps_lock)) { ergodox_right_led_1_on(); } else { ergodox_right_led_1_off(); } // Symbol layer turns on green light - if(layer_state & (1UL<event.pressed) { - register_code(KC_RSFT); - } else { - unregister_code(KC_RSFT); - } - break; - case 100: - layer_clear(); - return MACRODOWN(D(LSFT), T(5), U(LSFT), T(FN4), END); - break; - case 101: - layer_clear(); - return MACRODOWN(D(LSFT), T(7), U(LSFT), T(FN4), END); - break; - case 102: - layer_clear(); - return MACRODOWN(D(LSFT), T(SLSH), U(LSFT), T(FN4), END); - break; - case 103: - layer_clear(); - return MACRODOWN(D(LSFT), T(EQL), U(LSFT), T(FN4), END); - break; - case 104: - layer_clear(); - return MACRODOWN(D(LSFT), T(2), U(LSFT), T(FN4), END); - break; - case 105: - layer_clear(); - return MACRODOWN(D(LSFT), T(4), U(LSFT), T(FN4), END); - break; - case 106: - layer_clear(); - return MACRODOWN(D(LSFT), T(MINS), U(LSFT), T(FN4), END); - break; - case 107: - layer_clear(); - return MACRODOWN(T(LBRC), T(FN4), END); - break; - case 108: - layer_clear(); - return MACRODOWN(T(RBRC), T(FN4), END); - break; - case 130: - layer_clear(); - return MACRODOWN(D(LSFT), T(1), U(LSFT), T(FN4), END); - break; - case 109: - layer_clear(); - return MACRODOWN(T(SLSH), T(FN4), END); - break; - case 110: - layer_clear(); - return MACRODOWN(D(LSFT), T(9), U(LSFT), T(FN4), END); - break; - case 111: - layer_clear(); - return MACRODOWN(T(EQL), T(FN4), END); - break; - case 112: - layer_clear(); - return MACRODOWN(T(0), T(FN4), END); - break; - case 113: - layer_clear(); - return MACRODOWN(D(LSFT), T(LBRC), U(LSFT), T(FN4), END); - break; - case 114: - layer_clear(); - return MACRODOWN(D(LSFT), T(RBRC), U(LSFT), T(FN4), END); - break; - case 115: - layer_clear(); - return MACRODOWN(T(1), T(FN4), END); - break; - case 116: - layer_clear(); - return MACRODOWN(D(LSFT), T(8), U(LSFT), T(FN4), END); - break; - case 117: - layer_clear(); - return MACRODOWN(D(LSFT), T(0), U(LSFT), T(FN4), END); - break; - case 118: - layer_clear(); - return MACRODOWN(T(MINS), T(FN4), END); - break; - case 119: - layer_clear(); - return MACRODOWN(D(LSFT), T(QUOT), U(LSFT), T(FN4), END); - break; - case 120: - layer_clear(); - return MACRODOWN(T(6), T(FN4), END); - break; - case 121: - layer_clear(); - return MACRODOWN(T(7), T(FN4), END); - break; - case 122: - layer_clear(); - return MACRODOWN(T(8), T(FN4), END); - break; - case 123: - layer_clear(); - return MACRODOWN(T(9), T(FN4), END); - break; - case 124: - layer_clear(); - return MACRODOWN(D(LSFT), T(BSLS), U(LSFT), T(FN4), END); - break; - case 125: - layer_clear(); - return MACRODOWN(T(BSLS), T(FN4), END); - break; - case 126: - layer_clear(); - return MACRODOWN(T(2), T(FN4), END); - break; - case 127: - layer_clear(); - return MACRODOWN(T(3), T(FN4), END); - break; - case 128: - layer_clear(); - return MACRODOWN(T(4), T(FN4), END); - break; - case 129: - layer_clear(); - return MACRODOWN(T(5), T(FN4), END); - break; - - default: - return MACRO_NONE; - } - return MACRO_NONE; -}; - -// Runs just one time when the keyboard initializes. -void matrix_init_user(void) { +void tap_dead_code(uint16_t keycode) { + layer_clear(); + tap_code16(keycode); + layer_on(DEAD); +} -}; +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case M_100: + if (record->event.pressed) { + tap_dead_code(S(KC_5)); + } + return false; + case M_101: + if (record->event.pressed) { + tap_dead_code(S(KC_7)); + } + return false; + case M_102: + if (record->event.pressed) { + tap_dead_code(S(KC_SLSH)); + } + return false; + case M_103: + if (record->event.pressed) { + tap_dead_code(S(KC_EQL)); + } + return false; + case M_104: + if (record->event.pressed) { + tap_dead_code(S(KC_2)); + } + return false; + case M_105: + if (record->event.pressed) { + tap_dead_code(S(KC_4)); + } + return false; + case M_106: + if (record->event.pressed) { + tap_dead_code(S(KC_MINS)); + } + return false; + case M_107: + if (record->event.pressed) { + tap_dead_code(KC_LBRC); + } + return false; + case M_108: + if (record->event.pressed) { + tap_dead_code(KC_RBRC); + } + return false; + case M_109: + if (record->event.pressed) { + tap_dead_code(KC_SLSH); + } + return false; + case M_110: + if (record->event.pressed) { + tap_dead_code(S(KC_9)); + } + return false; + case M_111: + if (record->event.pressed) { + tap_dead_code(KC_EQL); + } + return false; + case M_112: + if (record->event.pressed) { + tap_dead_code(KC_0); + } + return false; + case M_113: + if (record->event.pressed) { + tap_dead_code(S(KC_LBRC)); + } + return false; + case M_114: + if (record->event.pressed) { + tap_dead_code(S(KC_RBRC)); + } + return false; + case M_115: + if (record->event.pressed) { + tap_dead_code(KC_1); + } + return false; + case M_116: + if (record->event.pressed) { + tap_dead_code(S(KC_8)); + } + return false; + case M_117: + if (record->event.pressed) { + tap_dead_code(S(KC_0)); + } + return false; + case M_118: + if (record->event.pressed) { + tap_dead_code(KC_MINS); + } + return false; + case M_119: + if (record->event.pressed) { + tap_dead_code(S(KC_QUOT)); + } + return false; + case M_120: + if (record->event.pressed) { + tap_dead_code(KC_6); + } + return false; + case M_121: + if (record->event.pressed) { + tap_dead_code(KC_7); + } + return false; + case M_122: + if (record->event.pressed) { + tap_dead_code(KC_8); + } + return false; + case M_123: + if (record->event.pressed) { + tap_dead_code(KC_9); + } + return false; + case M_124: + if (record->event.pressed) { + tap_dead_code(S(KC_BSLS)); + } + return false; + case M_125: + if (record->event.pressed) { + tap_dead_code(KC_BSLS); + } + return false; + case M_126: + if (record->event.pressed) { + tap_dead_code(KC_2); + } + return false; + case M_127: + if (record->event.pressed) { + tap_dead_code(KC_3); + } + return false; + case M_128: + if (record->event.pressed) { + tap_dead_code(KC_4); + } + return false; + case M_129: + if (record->event.pressed) { + tap_dead_code(KC_5); + } + return false; + case M_130: + if (record->event.pressed) { + tap_dead_code(S(KC_1)); + } + return false; + } + return true; +} // Runs constantly in the background, in a loop. void matrix_scan_user(void) { - - uint8_t layer = biton32(layer_state); - ergodox_board_led_off(); ergodox_right_led_1_off(); ergodox_right_led_2_off(); ergodox_right_led_3_off(); - switch (layer) { + + switch (get_highest_layer(layer_state)) { // TODO: Make this relevant to the ErgoDox EZ. case 1: ergodox_right_led_1_on(); @@ -361,5 +406,4 @@ void matrix_scan_user(void) { // none break; } - -}; +} From 3c08817e4454ed67fa776148252dc8a3f9ccb20c Mon Sep 17 00:00:00 2001 From: AnthonyNguyen168 <89651736+AnthonyNguyen168@users.noreply.github.com> Date: Mon, 1 Nov 2021 10:45:48 +0700 Subject: [PATCH 379/595] [Keyboard] Fix keymaps, RGB matrix, add support for WS2812 (#14974) --- keyboards/canary/canary60rgb/canary60rgb.c | 126 +++++++++--------- keyboards/canary/canary60rgb/info.json | 2 +- .../canary60rgb/keymaps/default/keymap.c | 11 +- .../canary/canary60rgb/keymaps/via/keymap.c | 4 +- keyboards/canary/canary60rgb/readme.md | 8 +- keyboards/canary/canary60rgb/v1/config.h | 5 +- keyboards/canary/canary60rgb/v1/rules.mk | 4 +- 7 files changed, 83 insertions(+), 77 deletions(-) diff --git a/keyboards/canary/canary60rgb/canary60rgb.c b/keyboards/canary/canary60rgb/canary60rgb.c index c59a0d3214..b01af5f294 100644 --- a/keyboards/canary/canary60rgb/canary60rgb.c +++ b/keyboards/canary/canary60rgb/canary60rgb.c @@ -17,73 +17,73 @@ #ifdef RGB_MATRIX_ENABLE const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { - { 0, K_14, J_14, L_14 }, - { 0, K_13, J_13, L_13 }, - { 0, K_12, J_12, L_12 }, - { 0, K_11, J_11, L_11 }, - { 0, K_10, J_10, L_10 }, - { 0, K_9, J_9, L_9 }, - { 0, K_8, J_8, L_8 }, - { 0, K_7, J_7, L_7 }, - { 0, K_6, J_6, L_6 }, - { 0, K_5, J_5, L_5 }, - { 0, K_4, J_4, L_4 }, - { 0, K_3, J_3, L_3 }, - { 0, K_2, J_2, L_2 }, - { 0, K_1, J_1, L_1 }, + { 0, J_14, K_14, L_14 }, + { 0, J_13, K_13, L_13 }, + { 0, J_12, K_12, L_12 }, + { 0, J_11, K_11, L_11 }, + { 0, J_10, K_10, L_10 }, + { 0, J_9, K_9, L_9 }, + { 0, J_8, K_8, L_8 }, + { 0, J_7, K_7, L_7 }, + { 0, J_6, K_6, L_6 }, + { 0, J_5, K_5, L_5 }, + { 0, J_4, K_4, L_4 }, + { 0, J_3, K_3, L_3 }, + { 0, J_2, K_2, L_2 }, + { 0, J_1, K_1, L_1 }, - { 0, H_14, G_14, I_14 }, - { 0, H_13, G_13, I_13 }, - { 0, H_12, G_12, I_12 }, - { 0, H_11, G_11, I_11 }, - { 0, H_10, G_10, I_10 }, - { 0, H_9, G_9, I_9 }, - { 0, H_8, G_8, I_8 }, - { 0, H_7, G_7, I_7 }, - { 0, H_6, G_6, I_6 }, - { 0, H_5, G_5, I_5 }, - { 0, H_4, G_4, I_4 }, - { 0, H_3, G_3, I_3 }, - { 0, H_2, G_2, I_2 }, - { 0, H_1, G_1, I_1 }, + { 0, G_14, H_14, I_14 }, + { 0, G_13, H_13, I_13 }, + { 0, G_12, H_12, I_12 }, + { 0, G_11, H_11, I_11 }, + { 0, G_10, H_10, I_10 }, + { 0, G_9, H_9, I_9 }, + { 0, G_8, H_8, I_8 }, + { 0, G_7, H_7, I_7 }, + { 0, G_6, H_6, I_6 }, + { 0, G_5, H_5, I_5 }, + { 0, G_4, H_4, I_4 }, + { 0, G_3, H_3, I_3 }, + { 0, G_2, H_2, I_2 }, + { 0, G_1, H_1, I_1 }, - { 0, E_14, D_14, F_14 }, - { 0, E_12, D_12, F_12 }, - { 0, E_11, D_11, F_11 }, - { 0, E_10, D_10, F_10 }, - { 0, E_9, D_9, F_9 }, - { 0, E_8, D_8, F_8 }, - { 0, E_7, D_7, F_7 }, - { 0, E_6, D_6, F_6 }, - { 0, E_5, D_5, F_5 }, - { 0, E_4, D_4, F_4 }, - { 0, E_3, D_3, F_3 }, - { 0, E_2, D_2, F_2 }, - { 0, E_1, D_1, F_1 }, + { 0, D_14, E_14, F_14 }, + { 0, D_12, E_12, F_12 }, + { 0, D_11, E_11, F_11 }, + { 0, D_10, E_10, F_10 }, + { 0, D_9, E_9, F_9 }, + { 0, D_8, E_8, F_8 }, + { 0, D_7, E_7, F_7 }, + { 0, D_6, E_6, F_6 }, + { 0, D_5, E_5, F_5 }, + { 0, D_4, E_4, F_4 }, + { 0, D_3, E_3, F_3 }, + { 0, D_2, E_2, F_2 }, + { 0, D_1, E_1, F_1 }, - { 0, B_14, A_14, C_14 }, - { 0, B_13, A_13, C_13 }, - { 0, B_11, A_11, C_11 }, - { 0, B_10, A_10, C_10 }, - { 0, B_9, A_9, C_9 }, - { 0, B_8, A_8, C_8 }, - { 0, B_7, A_7, C_7 }, - { 0, B_6, A_6, C_6 }, - { 0, B_5, A_5, C_5 }, - { 0, B_4, A_4, C_4 }, - { 0, B_3, A_3, C_3 }, - { 0, B_2, A_2, C_2 }, - { 0, B_1, A_1, C_1 }, + { 0, A_14, B_14, C_14 }, + { 0, A_13, B_13, C_13 }, + { 0, A_11, B_11, C_11 }, + { 0, A_10, B_10, C_10 }, + { 0, A_9, B_9, C_9 }, + { 0, A_8, B_8, C_8 }, + { 0, A_7, B_7, C_7 }, + { 0, A_6, B_6, C_6 }, + { 0, A_5, B_5, C_5 }, + { 0, A_4, B_4, C_4 }, + { 0, A_3, B_3, C_3 }, + { 0, A_2, B_2, C_2 }, + { 0, A_1, B_1, C_1 }, - { 0, B_15, A_15, C_15 }, - { 0, E_13, D_13, F_13 }, - { 0, B_12, A_12, C_12 }, - { 0, E_15, D_15, F_15 }, - { 0, H_15, G_15, I_15 }, - { 0, B_16, A_16, C_16 }, - { 0, E_16, D_16, F_16 }, - { 0, H_16, G_16, I_16 }, - { 0, K_16, J_16, L_16 } + { 0, A_15, B_15, C_15 }, + { 0, D_13, E_13, F_13 }, + { 0, A_12, B_12, C_12 }, + { 0, D_15, E_15, F_15 }, + { 0, G_15, H_15, I_15 }, + { 0, A_16, B_16, C_16 }, + { 0, D_16, E_16, F_16 }, + { 0, G_16, H_16, I_16 }, + { 0, J_16, K_16, L_16 } }; led_config_t g_led_config = { diff --git a/keyboards/canary/canary60rgb/info.json b/keyboards/canary/canary60rgb/info.json index b2526b3329..e8cc4c0fe5 100644 --- a/keyboards/canary/canary60rgb/info.json +++ b/keyboards/canary/canary60rgb/info.json @@ -1,7 +1,7 @@ { "keyboard_name": "CANARY60RGB", "url": "", - "maintainer": "canary", + "maintainer": "tuananhnguyen204", "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/canary/canary60rgb/keymaps/default/keymap.c b/keyboards/canary/canary60rgb/keymaps/default/keymap.c index 62c9971c35..150b187645 100644 --- a/keyboards/canary/canary60rgb/keymaps/default/keymap.c +++ b/keyboards/canary/canary60rgb/keymaps/default/keymap.c @@ -21,14 +21,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, RSFT_T(KC_SLSH), KC_UP, LT(2, KC_DEL), - KC_LCTL, KC_LGUI, LM(1, MOD_LALT), KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT ), [1] = LAYOUT( _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, _______, _______, KC_UP, _______, _______, _______, KC_CALC, _______, KC_INS, _______, KC_PSCR, KC_SLCK, KC_PAUS, RESET, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, EEP_RST, _______, _______, _______, _______, _______, _______, NK_TOGG, _______, _______, KC_END, KC_PGDN, KC_VOLU, KC_MUTE, - _______, _______, TO(3), TO(4), _______, _______, KC_MPRV, KC_VOLD, KC_MNXT + _______, _______, TO(3), _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT ), [2] = LAYOUT( _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, @@ -43,5 +43,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, KC_P4, KC_P5, KC_P6, _______, _______, _______, _______, KC_P4, KC_P5, KC_P6, _______, KC_PENT, _______, KC_P1, KC_P2, KC_P3, _______, _______, _______, _______, KC_P1, KC_P2, KC_P3, _______, _______, _______, KC_P0, KC_PDOT, KC_PENT, KC_P0, KC_PDOT, _______, _______, _______ + ), + [4] = LAYOUT( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + CTL_T(KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, RSFT_T(KC_SLSH), KC_UP, LT(2, KC_DEL), + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RALT, TO(0), KC_LEFT, KC_DOWN, KC_RGHT ) }; diff --git a/keyboards/canary/canary60rgb/keymaps/via/keymap.c b/keyboards/canary/canary60rgb/keymaps/via/keymap.c index 6ecc731da6..6bef543a16 100644 --- a/keyboards/canary/canary60rgb/keymaps/via/keymap.c +++ b/keyboards/canary/canary60rgb/keymaps/via/keymap.c @@ -21,14 +21,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, RSFT_T(KC_SLSH), KC_UP, LT(2, KC_DEL), - KC_LCTL, KC_LGUI, LM(1, MOD_LALT), KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT ), [1] = LAYOUT( _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, _______, _______, KC_UP, _______, _______, _______, KC_CALC, _______, KC_INS, _______, KC_PSCR, KC_SLCK, KC_PAUS, RESET, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGUP, EEP_RST, _______, _______, _______, _______, _______, _______, NK_TOGG, _______, _______, KC_END, KC_PGDN, KC_VOLU, KC_MUTE, - _______, _______, TO(3), TO(4), _______, _______, KC_MPRV, KC_VOLD, KC_MNXT + _______, _______, TO(3), _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT ), [2] = LAYOUT( _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, diff --git a/keyboards/canary/canary60rgb/readme.md b/keyboards/canary/canary60rgb/readme.md index a527453020..7abceb07f0 100644 --- a/keyboards/canary/canary60rgb/readme.md +++ b/keyboards/canary/canary60rgb/readme.md @@ -1,13 +1,13 @@ -# CANARY60RGB +# Canary60RGB ![canary60rgb1](https://github.com/AnthonyNguyen168/keyboards/blob/main/2.jpg) ![canary60rgb2](https://github.com/AnthonyNguyen168/keyboards/blob/main/3.jpg) A hotswap 60% RGB keyboard. -* Keyboard Maintainer: [AnthonyNguyen168](https://github.com/AnthonyNguyen168) -* Hardware Supported: CanaryTeam CANARY60RGB V1 -* Hardware Availability: [CanaryTeam](https://www.facebook.com/CanaryTeam/) (https://shopee.vn/M%E1%BA%A1ch-b%C3%A0n-ph%C3%ADm-Canary60RGB-PCB-Layout-60--i.196623820.5093520199) +* Keyboard Maintainer: [tuananhnguyen204](https://github.com/AnthonyNguyen168) (tuananhnguyen204@gmail.com) +* Hardware Supported: CanaryTeam Canary60RGB V1 +* Hardware Availability: [CanaryTeam](https://www.facebook.com/CanaryTeam/), [Shopee](https://shopee.vn/search?keyword=canary60rgb) * To reset the board into bootloader mode: press Reset hardware button or hold FN + Backslash (layer 1 RESET key) diff --git a/keyboards/canary/canary60rgb/v1/config.h b/keyboards/canary/canary60rgb/v1/config.h index 5097ea654b..303bde7e77 100644 --- a/keyboards/canary/canary60rgb/v1/config.h +++ b/keyboards/canary/canary60rgb/v1/config.h @@ -55,7 +55,7 @@ # define RGBLIGHT_EFFECT_RGB_TEST # define RGBLIGHT_EFFECT_ALTERNATING # define RGBLIGHT_EFFECT_TWINKLE -# define RGBLED_NUM 12 +# define RGBLED_NUM 20 # define RGBLIGHT_HUE_STEP 8 # define RGBLIGHT_SAT_STEP 8 # define RGBLIGHT_VAL_STEP 8 @@ -88,8 +88,7 @@ # define DISABLE_RGB_MATRIX_MULTISPLASH # define DISABLE_RGB_MATRIX_SOLID_SPLASH # define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH -# define DISABLE_RGB_MATRIX_DIGITAL_RAIN # define DRIVER_ADDR_1 0b1010000 # define DRIVER_COUNT 1 # define DRIVER_LED_TOTAL 63 -#endif +#endif \ No newline at end of file diff --git a/keyboards/canary/canary60rgb/v1/rules.mk b/keyboards/canary/canary60rgb/v1/rules.mk index 24f7f48263..d0b5fab7f4 100644 --- a/keyboards/canary/canary60rgb/v1/rules.mk +++ b/keyboards/canary/canary60rgb/v1/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = atmel-dfu # change yes to no to disable # BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys +MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration @@ -17,7 +17,7 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work NKRO_ENABLE = yes # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output RGB_MATRIX_ENABLE = yes # Use RGB matrix RGB_MATRIX_DRIVER = IS31FL3733 From 2980c63d3d4480a10bb1f7e6cf417bc9c9b65b72 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Mon, 1 Nov 2021 09:41:24 -0700 Subject: [PATCH 380/595] Fix issues with Oneshot disabling (#14934) --- quantum/action.c | 166 ++++++++++++++++++++++++++---------------- quantum/action_util.c | 3 +- 2 files changed, 104 insertions(+), 65 deletions(-) diff --git a/quantum/action.c b/quantum/action.c index 95f39d23d4..8c34b84ef1 100644 --- a/quantum/action.c +++ b/quantum/action.c @@ -27,6 +27,7 @@ along with this program. If not, see . #include "action_util.h" #include "action.h" #include "wait.h" +#include "keycode_config.h" #ifdef BACKLIGHT_ENABLE # include "backlight.h" @@ -87,19 +88,21 @@ void action_exec(keyevent_t event) { keyrecord_t record = {.event = event}; #ifndef NO_ACTION_ONESHOT + if (!keymap_config.oneshot_disable) { # if (defined(ONESHOT_TIMEOUT) && (ONESHOT_TIMEOUT > 0)) - if (has_oneshot_layer_timed_out()) { - clear_oneshot_layer_state(ONESHOT_OTHER_KEY_PRESSED); - } - if (has_oneshot_mods_timed_out()) { - clear_oneshot_mods(); - } + if (has_oneshot_layer_timed_out()) { + clear_oneshot_layer_state(ONESHOT_OTHER_KEY_PRESSED); + } + if (has_oneshot_mods_timed_out()) { + clear_oneshot_mods(); + } # ifdef SWAP_HANDS_ENABLE - if (has_oneshot_swaphands_timed_out()) { - clear_oneshot_swaphands(); - } + if (has_oneshot_swaphands_timed_out()) { + clear_oneshot_swaphands(); + } # endif # endif + } #endif #ifndef NO_ACTION_TAPPING @@ -195,7 +198,7 @@ void process_record(keyrecord_t *record) { if (!process_record_quantum(record)) { #ifndef NO_ACTION_ONESHOT - if (is_oneshot_layer_active() && record->event.pressed) { + if (is_oneshot_layer_active() && record->event.pressed && !keymap_config.oneshot_disable) { clear_oneshot_layer_state(ONESHOT_OTHER_KEY_PRESSED); } #endif @@ -260,7 +263,7 @@ void process_action(keyrecord_t *record, action_t action) { # ifdef SWAP_HANDS_ENABLE && !(action.kind.id == ACT_SWAP_HANDS && action.swap.code == OP_SH_ONESHOT) # endif - ) { + && !keymap_config.oneshot_disable) { clear_oneshot_layer_state(ONESHOT_OTHER_KEY_PRESSED); do_release_oneshot = !is_oneshot_layer_active(); } @@ -304,41 +307,68 @@ void process_action(keyrecord_t *record, action_t action) { # ifndef NO_ACTION_ONESHOT case MODS_ONESHOT: // Oneshot modifier - if (event.pressed) { - if (tap_count == 0) { - dprint("MODS_TAP: Oneshot: 0\n"); - register_mods(mods | get_oneshot_mods()); - } else if (tap_count == 1) { - dprint("MODS_TAP: Oneshot: start\n"); - set_oneshot_mods(mods | get_oneshot_mods()); -# if defined(ONESHOT_TAP_TOGGLE) && ONESHOT_TAP_TOGGLE > 1 - } else if (tap_count == ONESHOT_TAP_TOGGLE) { - dprint("MODS_TAP: Toggling oneshot"); - clear_oneshot_mods(); - set_oneshot_locked_mods(mods); - register_mods(mods); -# endif + if (keymap_config.oneshot_disable) { + if (event.pressed) { + if (mods) { + if (IS_MOD(action.key.code) || action.key.code == KC_NO) { + // e.g. LSFT(KC_LGUI): we don't want the LSFT to be weak as it would make it useless. + // This also makes LSFT(KC_LGUI) behave exactly the same as LGUI(KC_LSFT). + // Same applies for some keys like KC_MEH which are declared as MEH(KC_NO). + add_mods(mods); + } else { + add_weak_mods(mods); + } + send_keyboard_report(); + } + register_code(action.key.code); } else { - register_mods(mods | get_oneshot_mods()); + unregister_code(action.key.code); + if (mods) { + if (IS_MOD(action.key.code) || action.key.code == KC_NO) { + del_mods(mods); + } else { + del_weak_mods(mods); + } + send_keyboard_report(); + } } } else { - if (tap_count == 0) { - clear_oneshot_mods(); - unregister_mods(mods); - } else if (tap_count == 1) { - // Retain Oneshot mods + if (event.pressed) { + if (tap_count == 0) { + dprint("MODS_TAP: Oneshot: 0\n"); + register_mods(mods | get_oneshot_mods()); + } else if (tap_count == 1) { + dprint("MODS_TAP: Oneshot: start\n"); + set_oneshot_mods(mods | get_oneshot_mods()); # if defined(ONESHOT_TAP_TOGGLE) && ONESHOT_TAP_TOGGLE > 1 - if (mods & get_mods()) { - clear_oneshot_locked_mods(); + } else if (tap_count == ONESHOT_TAP_TOGGLE) { + dprint("MODS_TAP: Toggling oneshot"); clear_oneshot_mods(); - unregister_mods(mods); - } - } else if (tap_count == ONESHOT_TAP_TOGGLE) { - // Toggle Oneshot Layer + set_oneshot_locked_mods(mods); + register_mods(mods); # endif + } else { + register_mods(mods | get_oneshot_mods()); + } } else { - clear_oneshot_mods(); - unregister_mods(mods); + if (tap_count == 0) { + clear_oneshot_mods(); + unregister_mods(mods); + } else if (tap_count == 1) { + // Retain Oneshot mods +# if defined(ONESHOT_TAP_TOGGLE) && ONESHOT_TAP_TOGGLE > 1 + if (mods & get_mods()) { + clear_oneshot_locked_mods(); + clear_oneshot_mods(); + unregister_mods(mods); + } + } else if (tap_count == ONESHOT_TAP_TOGGLE) { + // Toggle Oneshot Layer +# endif + } else { + clear_oneshot_mods(); + unregister_mods(mods); + } } } break; @@ -523,39 +553,47 @@ void process_action(keyrecord_t *record, action_t action) { # ifndef NO_ACTION_ONESHOT case OP_ONESHOT: // Oneshot modifier -# if defined(ONESHOT_TAP_TOGGLE) && ONESHOT_TAP_TOGGLE > 1 - do_release_oneshot = false; - if (event.pressed) { - del_mods(get_oneshot_locked_mods()); - if (get_oneshot_layer_state() == ONESHOT_TOGGLED) { - reset_oneshot_layer(); - layer_off(action.layer_tap.val); - break; - } else if (tap_count < ONESHOT_TAP_TOGGLE) { + if (keymap_config.oneshot_disable) { + if (event.pressed) { layer_on(action.layer_tap.val); - set_oneshot_layer(action.layer_tap.val, ONESHOT_START); + } else { + layer_off(action.layer_tap.val); } } else { - add_mods(get_oneshot_locked_mods()); - if (tap_count >= ONESHOT_TAP_TOGGLE) { - reset_oneshot_layer(); - clear_oneshot_locked_mods(); - set_oneshot_layer(action.layer_tap.val, ONESHOT_TOGGLED); +# if defined(ONESHOT_TAP_TOGGLE) && ONESHOT_TAP_TOGGLE > 1 + do_release_oneshot = false; + if (event.pressed) { + del_mods(get_oneshot_locked_mods()); + if (get_oneshot_layer_state() == ONESHOT_TOGGLED) { + reset_oneshot_layer(); + layer_off(action.layer_tap.val); + break; + } else if (tap_count < ONESHOT_TAP_TOGGLE) { + layer_on(action.layer_tap.val); + set_oneshot_layer(action.layer_tap.val, ONESHOT_START); + } } else { - clear_oneshot_layer_state(ONESHOT_PRESSED); + add_mods(get_oneshot_locked_mods()); + if (tap_count >= ONESHOT_TAP_TOGGLE) { + reset_oneshot_layer(); + clear_oneshot_locked_mods(); + set_oneshot_layer(action.layer_tap.val, ONESHOT_TOGGLED); + } else { + clear_oneshot_layer_state(ONESHOT_PRESSED); + } } - } # else - if (event.pressed) { - layer_on(action.layer_tap.val); - set_oneshot_layer(action.layer_tap.val, ONESHOT_START); - } else { - clear_oneshot_layer_state(ONESHOT_PRESSED); - if (tap_count > 1) { - clear_oneshot_layer_state(ONESHOT_OTHER_KEY_PRESSED); + if (event.pressed) { + layer_on(action.layer_tap.val); + set_oneshot_layer(action.layer_tap.val, ONESHOT_START); + } else { + clear_oneshot_layer_state(ONESHOT_PRESSED); + if (tap_count > 1) { + clear_oneshot_layer_state(ONESHOT_OTHER_KEY_PRESSED); + } } - } # endif + } break; # endif default: diff --git a/quantum/action_util.c b/quantum/action_util.c index 9a85bd5040..78e02aec18 100644 --- a/quantum/action_util.c +++ b/quantum/action_util.c @@ -170,7 +170,7 @@ void reset_oneshot_layer(void) { void clear_oneshot_layer_state(oneshot_fullfillment_t state) { uint8_t start_state = oneshot_layer_data; oneshot_layer_data &= ~state; - if ((!get_oneshot_layer_state() && start_state != oneshot_layer_data) || keymap_config.oneshot_disable) { + if ((!get_oneshot_layer_state() && start_state != oneshot_layer_data) && !keymap_config.oneshot_disable) { layer_off(get_oneshot_layer()); reset_oneshot_layer(); } @@ -189,6 +189,7 @@ void oneshot_set(bool active) { if (keymap_config.oneshot_disable != active) { keymap_config.oneshot_disable = active; eeconfig_update_keymap(keymap_config.raw); + clear_oneshot_layer_state(ONESHOT_OTHER_KEY_PRESSED); dprintf("Oneshot: active: %d\n", active); } } From 4bf7ce2298dff3f9e256115ff551a86cf239b421 Mon Sep 17 00:00:00 2001 From: Albert Y <76888457+filterpaper@users.noreply.github.com> Date: Tue, 2 Nov 2021 01:30:07 +0800 Subject: [PATCH 381/595] Add Fractal RGB matrix effects (#12670) * Squashed fractal effect commit for easier rebase * Update documentation * Squashed fractal effect commit for easier rebase * Update documentation * Update doc spacing Co-authored-by: Ryan * Update feature_rgb_matrix.md Co-authored-by: filterpaper Co-authored-by: Ryan Co-authored-by: Nick Brassel --- docs/feature_rgb_matrix.md | 4 +- quantum/rgb_matrix/animations/fractal_anim.h | 61 +++++++++++++++++++ .../animations/rgb_matrix_effects.inc | 1 + 3 files changed, 65 insertions(+), 1 deletion(-) create mode 100644 quantum/rgb_matrix/animations/fractal_anim.h diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md index 708cb9f73e..41d0bca379 100644 --- a/docs/feature_rgb_matrix.md +++ b/docs/feature_rgb_matrix.md @@ -422,6 +422,7 @@ enum rgb_matrix_effects { RGB_MATRIX_HUE_BREATHING, // Hue shifts up a slight ammount at the same time, then shifts back RGB_MATRIX_HUE_PENDULUM, // Hue shifts up a slight ammount in a wave to the right, then back to the left RGB_MATRIX_HUE_WAVE, // Hue shifts up a slight ammount and then back down in a wave to the right + RGB_MATRIX_FRACTAL, // Single hue fractal filled keys pulsing horizontally out to edges #if define(RGB_MATRIX_FRAMEBUFFER_EFFECTS) RGB_MATRIX_TYPING_HEATMAP, // How hot is your WPM! RGB_MATRIX_DIGITAL_RAIN, // That famous computer simulation @@ -474,7 +475,8 @@ You can disable a single effect by defining `DISABLE_[EFFECT_NAME]` in your `con |`#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS` |Disables `RGB_MATRIX_JELLYBEAN_RAINDROPS` | |`#define DISABLE_RGB_MATRIX_HUE_BREATHING` |Disables `RGB_MATRIX_HUE_BREATHING` | |`#define DISABLE_RGB_MATRIX_HUE_PENDULUM` |Disables `RGB_MATRIX_HUE_PENDULUM` | -|`#define DISABLE_RGB_MATRIX_HUE_WAVE ` |Disables `RGB_MATRIX_HUE_WAVE ` | +|`#define DISABLE_RGB_MATRIX_HUE_WAVE` |Disables `RGB_MATRIX_HUE_WAVE` | +|`#define DISABLE_RGB_MATRIX_FRACTAL` |Disables `RGB_MATRIX_FRACTAL` | |`#define DISABLE_RGB_MATRIX_TYPING_HEATMAP` |Disables `RGB_MATRIX_TYPING_HEATMAP` | |`#define DISABLE_RGB_MATRIX_DIGITAL_RAIN` |Disables `RGB_MATRIX_DIGITAL_RAIN` | |`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE` |Disables `RGB_MATRIX_SOLID_REACTIVE_SIMPLE` | diff --git a/quantum/rgb_matrix/animations/fractal_anim.h b/quantum/rgb_matrix/animations/fractal_anim.h new file mode 100644 index 0000000000..99693165d7 --- /dev/null +++ b/quantum/rgb_matrix/animations/fractal_anim.h @@ -0,0 +1,61 @@ +/* Copyright (C) 2021 @filterpaper + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +// Inspired from 4x12 fractal created by @schwarzgrau + +#ifdef ENABLE_RGB_MATRIX_FRACTAL +RGB_MATRIX_EFFECT(FRACTAL) +# ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS + +static bool FRACTAL(effect_params_t* params) { + #define MID_COL MATRIX_COLS / 2 + static bool led[MATRIX_ROWS][MATRIX_COLS]; + + static uint32_t wait_timer = 0; + if (wait_timer > g_rgb_timer) { return false; } + + inline uint32_t interval(void) { return 3000 / scale16by8(qadd8(rgb_matrix_config.speed, 16), 16); } + + RGB rgb = rgb_matrix_hsv_to_rgb(rgb_matrix_config.hsv); + for (uint8_t h = 0; h < MATRIX_ROWS; ++h) { + + for (uint8_t l = 0; l < MID_COL-1; ++l) { // Light and move left columns outwards + if (led[h][l]) { rgb_matrix_set_color(g_led_config.matrix_co[h][l], rgb.r, rgb.g, rgb.b); } + else { rgb_matrix_set_color(g_led_config.matrix_co[h][l], 0, 0, 0); } + led[h][l] = led[h][l+1]; + } + + for (uint8_t r = MATRIX_COLS-1; r > MID_COL; --r) { // Light and move right columns outwards + if (led[h][r]) { rgb_matrix_set_color(g_led_config.matrix_co[h][r], rgb.r, rgb.g, rgb.b); } + else { rgb_matrix_set_color(g_led_config.matrix_co[h][r], 0, 0, 0); } + led[h][r] = led[h][r-1]; + } + + // Light both middle columns + if (led[h][MID_COL]) { rgb_matrix_set_color(g_led_config.matrix_co[h][MID_COL], rgb.r, rgb.g, rgb.b); } + else { rgb_matrix_set_color(g_led_config.matrix_co[h][MID_COL], 0, 0, 0); } + if (led[h][MID_COL-1]) { rgb_matrix_set_color(g_led_config.matrix_co[h][MID_COL-1], rgb.r, rgb.g, rgb.b); } + else { rgb_matrix_set_color(g_led_config.matrix_co[h][MID_COL-1], 0, 0, 0); } + + // Generate new random fractal columns + led[h][MID_COL] = led[h][MID_COL-1] = (random8() & 3) ? false : true; + } + + wait_timer = g_rgb_timer + interval(); + return false; +} +# endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS +#endif // ENABLE_RGB_MATRIX_FRACTAL diff --git a/quantum/rgb_matrix/animations/rgb_matrix_effects.inc b/quantum/rgb_matrix/animations/rgb_matrix_effects.inc index 302ad79c04..33d2b42286 100644 --- a/quantum/rgb_matrix/animations/rgb_matrix_effects.inc +++ b/quantum/rgb_matrix/animations/rgb_matrix_effects.inc @@ -26,6 +26,7 @@ #include "hue_breathing_anim.h" #include "hue_pendulum_anim.h" #include "hue_wave_anim.h" +#include "fractal_anim.h" #include "typing_heatmap_anim.h" #include "digital_rain_anim.h" #include "solid_reactive_simple_anim.h" From ee371c1295f00c119dd5a1bb2f3d4acedff832a7 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Mon, 1 Nov 2021 18:57:37 +0000 Subject: [PATCH 382/595] Fix up issues shown by clang-format of vusb (#15004) --- tmk_core/protocol/vusb/vusb.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/tmk_core/protocol/vusb/vusb.c b/tmk_core/protocol/vusb/vusb.c index e4db5d0654..bd0f1c21aa 100644 --- a/tmk_core/protocol/vusb/vusb.c +++ b/tmk_core/protocol/vusb/vusb.c @@ -297,6 +297,7 @@ void send_digitizer(report_digitizer_t *report) { #ifdef DIGITIZER_ENABLE if (usbInterruptIsReadyShared()) { usbSetInterruptShared((void *)report, sizeof(report_digitizer_t)); + } #endif } @@ -569,7 +570,7 @@ const PROGMEM uchar shared_hid_report[] = { 0x09, 0x31, // Usage (Y) 0x81, 0x02, // Input (Data, Variable, Absolute) 0xC0, // End Collection - 0xC0 // End Collection + 0xC0, // End Collection #endif #ifdef PROGRAMMABLE_BUTTON_ENABLE @@ -589,7 +590,7 @@ const PROGMEM uchar shared_hid_report[] = { 0x75, 0x01, // Report Size (1) 0x81, 0x02, // Input (Data, Variable, Absolute) 0xC0, // End Collection - 0xC0 // End Collection + 0xC0, // End Collection #endif #ifdef SHARED_EP_ENABLE From 92385e30cdad61ddfc0461b1ce1340bcb494a68a Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Mon, 1 Nov 2021 19:18:33 +0000 Subject: [PATCH 383/595] Manually format develop (#15003) --- drivers/sensors/adns5050.c | 23 +-- drivers/sensors/adns5050.h | 18 +- drivers/sensors/adns9800.c | 119 ++++++----- drivers/sensors/adns9800.h | 4 +- drivers/sensors/pmw3360.c | 96 ++++----- drivers/sensors/pmw3360.h | 19 +- platforms/avr/drivers/analog.h | 2 +- quantum/action.c | 83 ++++---- quantum/action.h | 2 +- quantum/action_tapping.c | 38 ++-- quantum/debounce/asym_eager_defer_pk.c | 22 +-- quantum/debounce/sym_defer_g.c | 2 +- quantum/debounce/sym_defer_pk.c | 6 +- quantum/debounce/sym_eager_pk.c | 8 +- quantum/debounce/sym_eager_pr.c | 8 +- .../tests/asym_eager_defer_pk_tests.cpp | 66 ++++--- .../debounce/tests/debounce_test_common.cpp | 72 +++---- quantum/debounce/tests/debounce_test_common.h | 24 ++- quantum/debounce/tests/sym_defer_g_tests.cpp | 45 +++-- quantum/debounce/tests/sym_defer_pk_tests.cpp | 45 +++-- quantum/debounce/tests/sym_eager_pk_tests.cpp | 48 +++-- quantum/debounce/tests/sym_eager_pr_tests.cpp | 57 ++++-- quantum/keymap_extras/keymap_steno.h | 3 +- quantum/process_keycode/process_combo.c | 184 +++++++++--------- quantum/process_keycode/process_combo.h | 4 +- quantum/process_keycode/process_steno.c | 9 +- quantum/quantum_keycodes.h | 12 +- quantum/rgb_matrix/animations/fractal_anim.h | 51 +++-- quantum/split_common/transactions.c | 48 ++--- tmk_core/common/chibios/sleep_led.c | 4 +- 30 files changed, 597 insertions(+), 525 deletions(-) diff --git a/drivers/sensors/adns5050.c b/drivers/sensors/adns5050.c index e7273977d5..254ef2ee87 100644 --- a/drivers/sensors/adns5050.c +++ b/drivers/sensors/adns5050.c @@ -17,7 +17,6 @@ * along with this program. If not, see . */ - #include "adns5050.h" #include "wait.h" #include "debug.h" @@ -61,13 +60,9 @@ void adns_sync(void) { writePinHigh(ADNS_CS_PIN); } -void adns_cs_select(void) { - writePinLow(ADNS_CS_PIN); -} +void adns_cs_select(void) { writePinLow(ADNS_CS_PIN); } -void adns_cs_deselect(void) { - writePinHigh(ADNS_CS_PIN); -} +void adns_cs_deselect(void) { writePinHigh(ADNS_CS_PIN); } uint8_t adns_serial_read(void) { setPinInput(ADNS_SDIO_PIN); @@ -121,7 +116,7 @@ uint8_t adns_read_reg(uint8_t reg_addr) { // We don't need a minimum tSRAD here. That's because a 4ms wait time is // already included in adns_serial_write(), so we're good. // See page 10 and 15 of the ADNS spec sheet. - //wait_us(4); + // wait_us(4); uint8_t byte = adns_serial_read(); @@ -138,7 +133,7 @@ uint8_t adns_read_reg(uint8_t reg_addr) { void adns_write_reg(uint8_t reg_addr, uint8_t data) { adns_cs_select(); - adns_serial_write( 0b10000000 | reg_addr ); + adns_serial_write(0b10000000 | reg_addr); adns_serial_write(data); adns_cs_deselect(); } @@ -155,7 +150,7 @@ report_adns_t adns_read_burst(void) { // We don't need a minimum tSRAD here. That's because a 4ms wait time is // already included in adns_serial_write(), so we're good. // See page 10 and 15 of the ADNS spec sheet. - //wait_us(4); + // wait_us(4); uint8_t x = adns_serial_read(); uint8_t y = adns_serial_read(); @@ -180,13 +175,11 @@ int8_t convert_twoscomp(uint8_t data) { } // Don't forget to use the definitions for CPI in the header file. -void adns_set_cpi(uint8_t cpi) { - adns_write_reg(REG_MOUSE_CONTROL2, cpi); -} +void adns_set_cpi(uint8_t cpi) { adns_write_reg(REG_MOUSE_CONTROL2, cpi); } bool adns_check_signature(void) { - uint8_t pid = adns_read_reg(REG_PRODUCT_ID); - uint8_t rid = adns_read_reg(REG_REVISION_ID); + uint8_t pid = adns_read_reg(REG_PRODUCT_ID); + uint8_t rid = adns_read_reg(REG_REVISION_ID); uint8_t pid2 = adns_read_reg(REG_PRODUCT_ID2); return (pid == 0x12 && rid == 0x01 && pid2 == 0x26); diff --git a/drivers/sensors/adns5050.h b/drivers/sensors/adns5050.h index ff8e8f78e9..5e9edc2962 100644 --- a/drivers/sensors/adns5050.h +++ b/drivers/sensors/adns5050.h @@ -67,13 +67,13 @@ typedef struct { // A bunch of functions to implement the ADNS5050-specific serial protocol. // Note that the "serial.h" driver is insufficient, because it does not // manually manipulate a serial clock signal. -void adns_init(void); -void adns_sync(void); -uint8_t adns_serial_read(void); -void adns_serial_write(uint8_t data); -uint8_t adns_read_reg(uint8_t reg_addr); -void adns_write_reg(uint8_t reg_addr, uint8_t data); +void adns_init(void); +void adns_sync(void); +uint8_t adns_serial_read(void); +void adns_serial_write(uint8_t data); +uint8_t adns_read_reg(uint8_t reg_addr); +void adns_write_reg(uint8_t reg_addr, uint8_t data); report_adns_t adns_read_burst(void); -int8_t convert_twoscomp(uint8_t data); -void adns_set_cpi(uint8_t cpi); -bool adns_check_signature(void); +int8_t convert_twoscomp(uint8_t data); +void adns_set_cpi(uint8_t cpi); +bool adns_check_signature(void); diff --git a/drivers/sensors/adns9800.c b/drivers/sensors/adns9800.c index 17966b81f9..b4f683452c 100644 --- a/drivers/sensors/adns9800.c +++ b/drivers/sensors/adns9800.c @@ -20,57 +20,57 @@ #include "adns9800.h" // registers -#define REG_Product_ID 0x00 -#define REG_Revision_ID 0x01 -#define REG_Motion 0x02 -#define REG_Delta_X_L 0x03 -#define REG_Delta_X_H 0x04 -#define REG_Delta_Y_L 0x05 -#define REG_Delta_Y_H 0x06 -#define REG_SQUAL 0x07 -#define REG_Pixel_Sum 0x08 -#define REG_Maximum_Pixel 0x09 -#define REG_Minimum_Pixel 0x0a -#define REG_Shutter_Lower 0x0b -#define REG_Shutter_Upper 0x0c -#define REG_Frame_Period_Lower 0x0d -#define REG_Frame_Period_Upper 0x0e -#define REG_Configuration_I 0x0f -#define REG_Configuration_II 0x10 -#define REG_Frame_Capture 0x12 -#define REG_SROM_Enable 0x13 -#define REG_Run_Downshift 0x14 -#define REG_Rest1_Rate 0x15 -#define REG_Rest1_Downshift 0x16 -#define REG_Rest2_Rate 0x17 -#define REG_Rest2_Downshift 0x18 -#define REG_Rest3_Rate 0x19 -#define REG_Frame_Period_Max_Bound_Lower 0x1a -#define REG_Frame_Period_Max_Bound_Upper 0x1b -#define REG_Frame_Period_Min_Bound_Lower 0x1c -#define REG_Frame_Period_Min_Bound_Upper 0x1d -#define REG_Shutter_Max_Bound_Lower 0x1e -#define REG_Shutter_Max_Bound_Upper 0x1f -#define REG_LASER_CTRL0 0x20 -#define REG_Observation 0x24 -#define REG_Data_Out_Lower 0x25 -#define REG_Data_Out_Upper 0x26 -#define REG_SROM_ID 0x2a -#define REG_Lift_Detection_Thr 0x2e -#define REG_Configuration_V 0x2f -#define REG_Configuration_IV 0x39 -#define REG_Power_Up_Reset 0x3a -#define REG_Shutdown 0x3b -#define REG_Inverse_Product_ID 0x3f -#define REG_Motion_Burst 0x50 -#define REG_SROM_Load_Burst 0x62 -#define REG_Pixel_Burst 0x64 +#define REG_Product_ID 0x00 +#define REG_Revision_ID 0x01 +#define REG_Motion 0x02 +#define REG_Delta_X_L 0x03 +#define REG_Delta_X_H 0x04 +#define REG_Delta_Y_L 0x05 +#define REG_Delta_Y_H 0x06 +#define REG_SQUAL 0x07 +#define REG_Pixel_Sum 0x08 +#define REG_Maximum_Pixel 0x09 +#define REG_Minimum_Pixel 0x0a +#define REG_Shutter_Lower 0x0b +#define REG_Shutter_Upper 0x0c +#define REG_Frame_Period_Lower 0x0d +#define REG_Frame_Period_Upper 0x0e +#define REG_Configuration_I 0x0f +#define REG_Configuration_II 0x10 +#define REG_Frame_Capture 0x12 +#define REG_SROM_Enable 0x13 +#define REG_Run_Downshift 0x14 +#define REG_Rest1_Rate 0x15 +#define REG_Rest1_Downshift 0x16 +#define REG_Rest2_Rate 0x17 +#define REG_Rest2_Downshift 0x18 +#define REG_Rest3_Rate 0x19 +#define REG_Frame_Period_Max_Bound_Lower 0x1a +#define REG_Frame_Period_Max_Bound_Upper 0x1b +#define REG_Frame_Period_Min_Bound_Lower 0x1c +#define REG_Frame_Period_Min_Bound_Upper 0x1d +#define REG_Shutter_Max_Bound_Lower 0x1e +#define REG_Shutter_Max_Bound_Upper 0x1f +#define REG_LASER_CTRL0 0x20 +#define REG_Observation 0x24 +#define REG_Data_Out_Lower 0x25 +#define REG_Data_Out_Upper 0x26 +#define REG_SROM_ID 0x2a +#define REG_Lift_Detection_Thr 0x2e +#define REG_Configuration_V 0x2f +#define REG_Configuration_IV 0x39 +#define REG_Power_Up_Reset 0x3a +#define REG_Shutdown 0x3b +#define REG_Inverse_Product_ID 0x3f +#define REG_Motion_Burst 0x50 +#define REG_SROM_Load_Burst 0x62 +#define REG_Pixel_Burst 0x64 #define ADNS_CLOCK_SPEED 2000000 #define MIN_CPI 200 #define MAX_CPI 8200 #define CPI_STEP 200 -#define CLAMP_CPI(value) value < MIN_CPI ? MIN_CPI : value > MAX_CPI ? MAX_CPI : value +#define CLAMP_CPI(value) value MAX_CPI ? MAX_CPI : value #define SPI_MODE 3 #define SPI_DIVISOR (F_CPU / ADNS_CLOCK_SPEED) #define US_BETWEEN_WRITES 120 @@ -80,12 +80,9 @@ extern const uint8_t firmware_data[]; -void adns_spi_start(void){ - spi_start(SPI_SS_PIN, false, SPI_MODE, SPI_DIVISOR); -} - -void adns_write(uint8_t reg_addr, uint8_t data){ +void adns_spi_start(void) { spi_start(SPI_SS_PIN, false, SPI_MODE, SPI_DIVISOR); } +void adns_write(uint8_t reg_addr, uint8_t data) { adns_spi_start(); spi_write(reg_addr | MSB1); spi_write(data); @@ -93,10 +90,9 @@ void adns_write(uint8_t reg_addr, uint8_t data){ wait_us(US_BETWEEN_WRITES); } -uint8_t adns_read(uint8_t reg_addr){ - +uint8_t adns_read(uint8_t reg_addr) { adns_spi_start(); - spi_write(reg_addr & 0x7f ); + spi_write(reg_addr & 0x7f); uint8_t data = spi_read(); spi_stop(); wait_us(US_BETWEEN_READS); @@ -105,7 +101,6 @@ uint8_t adns_read(uint8_t reg_addr){ } void adns_init() { - setPinOutput(SPI_SS_PIN); spi_init(); @@ -144,7 +139,7 @@ void adns_init() { // send all bytes of the firmware unsigned char c; - for(int i = 0; i < FIRMWARE_LENGTH; i++){ + for (int i = 0; i < FIRMWARE_LENGTH; i++) { c = (unsigned char)pgm_read_byte(firmware_data + i); spi_write(c); wait_us(15); @@ -161,7 +156,7 @@ void adns_init() { config_adns_t adns_get_config(void) { uint8_t config_1 = adns_read(REG_Configuration_I); - return (config_adns_t){ (config_1 & 0xFF) * CPI_STEP }; + return (config_adns_t){(config_1 & 0xFF) * CPI_STEP}; } void adns_set_config(config_adns_t config) { @@ -169,20 +164,17 @@ void adns_set_config(config_adns_t config) { adns_write(REG_Configuration_I, config_1); } -static int16_t convertDeltaToInt(uint8_t high, uint8_t low){ - +static int16_t convertDeltaToInt(uint8_t high, uint8_t low) { // join bytes into twos compliment uint16_t twos_comp = (high << 8) | low; // convert twos comp to int - if (twos_comp & 0x8000) - return -1 * (~twos_comp + 1); + if (twos_comp & 0x8000) return -1 * (~twos_comp + 1); return twos_comp; } report_adns_t adns_get_report(void) { - report_adns_t report = {0, 0}; adns_spi_start(); @@ -194,8 +186,7 @@ report_adns_t adns_get_report(void) { uint8_t motion = spi_read(); - if(motion & 0x80) { - + if (motion & 0x80) { // clear observation register spi_read(); diff --git a/drivers/sensors/adns9800.h b/drivers/sensors/adns9800.h index 2f50b8f1be..d19ded4012 100644 --- a/drivers/sensors/adns9800.h +++ b/drivers/sensors/adns9800.h @@ -28,8 +28,8 @@ typedef struct { int16_t y; } report_adns_t; -void adns_init(void); +void adns_init(void); config_adns_t adns_get_config(void); -void adns_set_config(config_adns_t); +void adns_set_config(config_adns_t); /* Reads and clears the current delta values on the ADNS sensor */ report_adns_t adns_get_report(void); diff --git a/drivers/sensors/pmw3360.c b/drivers/sensors/pmw3360.c index 5463bfc594..79b653e452 100644 --- a/drivers/sensors/pmw3360.c +++ b/drivers/sensors/pmw3360.c @@ -23,55 +23,55 @@ #include "pmw3360_firmware.h" // Registers -#define REG_Product_ID 0x00 -#define REG_Revision_ID 0x01 -#define REG_Motion 0x02 -#define REG_Delta_X_L 0x03 -#define REG_Delta_X_H 0x04 -#define REG_Delta_Y_L 0x05 -#define REG_Delta_Y_H 0x06 -#define REG_SQUAL 0x07 -#define REG_Raw_Data_Sum 0x08 -#define REG_Maximum_Raw_data 0x09 -#define REG_Minimum_Raw_data 0x0A -#define REG_Shutter_Lower 0x0B -#define REG_Shutter_Upper 0x0C -#define REG_Control 0x0D -#define REG_Config1 0x0F -#define REG_Config2 0x10 -#define REG_Angle_Tune 0x11 -#define REG_Frame_Capture 0x12 -#define REG_SROM_Enable 0x13 -#define REG_Run_Downshift 0x14 -#define REG_Rest1_Rate_Lower 0x15 -#define REG_Rest1_Rate_Upper 0x16 -#define REG_Rest1_Downshift 0x17 -#define REG_Rest2_Rate_Lower 0x18 -#define REG_Rest2_Rate_Upper 0x19 -#define REG_Rest2_Downshift 0x1A -#define REG_Rest3_Rate_Lower 0x1B -#define REG_Rest3_Rate_Upper 0x1C -#define REG_Observation 0x24 -#define REG_Data_Out_Lower 0x25 -#define REG_Data_Out_Upper 0x26 -#define REG_Raw_Data_Dump 0x29 -#define REG_SROM_ID 0x2A -#define REG_Min_SQ_Run 0x2B -#define REG_Raw_Data_Threshold 0x2C -#define REG_Config5 0x2F -#define REG_Power_Up_Reset 0x3A -#define REG_Shutdown 0x3B -#define REG_Inverse_Product_ID 0x3F -#define REG_LiftCutoff_Tune3 0x41 -#define REG_Angle_Snap 0x42 -#define REG_LiftCutoff_Tune1 0x4A -#define REG_Motion_Burst 0x50 -#define REG_LiftCutoff_Tune_Timeout 0x58 +#define REG_Product_ID 0x00 +#define REG_Revision_ID 0x01 +#define REG_Motion 0x02 +#define REG_Delta_X_L 0x03 +#define REG_Delta_X_H 0x04 +#define REG_Delta_Y_L 0x05 +#define REG_Delta_Y_H 0x06 +#define REG_SQUAL 0x07 +#define REG_Raw_Data_Sum 0x08 +#define REG_Maximum_Raw_data 0x09 +#define REG_Minimum_Raw_data 0x0A +#define REG_Shutter_Lower 0x0B +#define REG_Shutter_Upper 0x0C +#define REG_Control 0x0D +#define REG_Config1 0x0F +#define REG_Config2 0x10 +#define REG_Angle_Tune 0x11 +#define REG_Frame_Capture 0x12 +#define REG_SROM_Enable 0x13 +#define REG_Run_Downshift 0x14 +#define REG_Rest1_Rate_Lower 0x15 +#define REG_Rest1_Rate_Upper 0x16 +#define REG_Rest1_Downshift 0x17 +#define REG_Rest2_Rate_Lower 0x18 +#define REG_Rest2_Rate_Upper 0x19 +#define REG_Rest2_Downshift 0x1A +#define REG_Rest3_Rate_Lower 0x1B +#define REG_Rest3_Rate_Upper 0x1C +#define REG_Observation 0x24 +#define REG_Data_Out_Lower 0x25 +#define REG_Data_Out_Upper 0x26 +#define REG_Raw_Data_Dump 0x29 +#define REG_SROM_ID 0x2A +#define REG_Min_SQ_Run 0x2B +#define REG_Raw_Data_Threshold 0x2C +#define REG_Config5 0x2F +#define REG_Power_Up_Reset 0x3A +#define REG_Shutdown 0x3B +#define REG_Inverse_Product_ID 0x3F +#define REG_LiftCutoff_Tune3 0x41 +#define REG_Angle_Snap 0x42 +#define REG_LiftCutoff_Tune1 0x4A +#define REG_Motion_Burst 0x50 +#define REG_LiftCutoff_Tune_Timeout 0x58 #define REG_LiftCutoff_Tune_Min_Length 0x5A -#define REG_SROM_Load_Burst 0x62 -#define REG_Lift_Config 0x63 -#define REG_Raw_Data_Burst 0x64 -#define REG_LiftCutoff_Tune2 0x65 +#define REG_SROM_Load_Burst 0x62 +#define REG_Lift_Config 0x63 +#define REG_Raw_Data_Burst 0x64 +#define REG_LiftCutoff_Tune2 0x65 bool _inBurst = false; diff --git a/drivers/sensors/pmw3360.h b/drivers/sensors/pmw3360.h index 124c62cf00..7429a6ba09 100644 --- a/drivers/sensors/pmw3360.h +++ b/drivers/sensors/pmw3360.h @@ -66,20 +66,17 @@ typedef struct { int8_t mdy; } report_pmw_t; - - -bool spi_start_adv(void); -void spi_stop_adv(void); +bool spi_start_adv(void); +void spi_stop_adv(void); spi_status_t spi_write_adv(uint8_t reg_addr, uint8_t data); -uint8_t spi_read_adv(uint8_t reg_addr); -bool pmw_spi_init(void); -void pmw_set_cpi(uint16_t cpi); -uint16_t pmw_get_cpi(void); -void pmw_upload_firmware(void); -bool pmw_check_signature(void); +uint8_t spi_read_adv(uint8_t reg_addr); +bool pmw_spi_init(void); +void pmw_set_cpi(uint16_t cpi); +uint16_t pmw_get_cpi(void); +void pmw_upload_firmware(void); +bool pmw_check_signature(void); report_pmw_t pmw_read_burst(void); - #define degToRad(angleInDegrees) ((angleInDegrees)*M_PI / 180.0) #define radToDeg(angleInRadians) ((angleInRadians)*180.0 / M_PI) #define constrain(amt, low, high) ((amt) < (low) ? (low) : ((amt) > (high) ? (high) : (amt))) diff --git a/platforms/avr/drivers/analog.h b/platforms/avr/drivers/analog.h index b3c05e1976..fa2fb0d89b 100644 --- a/platforms/avr/drivers/analog.h +++ b/platforms/avr/drivers/analog.h @@ -22,7 +22,7 @@ #ifdef __cplusplus extern "C" { #endif -void analogReference(uint8_t mode); +void analogReference(uint8_t mode); int16_t analogReadPin(pin_t pin); uint8_t pinToMux(pin_t pin); diff --git a/quantum/action.c b/quantum/action.c index 8c34b84ef1..5c33bd6d2c 100644 --- a/quantum/action.c +++ b/quantum/action.c @@ -821,9 +821,10 @@ void register_code(uint8_t code) { } #endif - else if IS_KEY (code) { - // TODO: should push command_proc out of this block? - if (command_proc(code)) return; + else if + IS_KEY(code) { + // TODO: should push command_proc out of this block? + if (command_proc(code)) return; #ifndef NO_ACTION_ONESHOT /* TODO: remove @@ -840,33 +841,35 @@ void register_code(uint8_t code) { } else */ #endif - { - // Force a new key press if the key is already pressed - // without this, keys with the same keycode, but different - // modifiers will be reported incorrectly, see issue #1708 - if (is_key_pressed(keyboard_report, code)) { - del_key(code); + { + // Force a new key press if the key is already pressed + // without this, keys with the same keycode, but different + // modifiers will be reported incorrectly, see issue #1708 + if (is_key_pressed(keyboard_report, code)) { + del_key(code); + send_keyboard_report(); + } + add_key(code); send_keyboard_report(); } - add_key(code); + } + else if + IS_MOD(code) { + add_mods(MOD_BIT(code)); send_keyboard_report(); } - } else if IS_MOD (code) { - add_mods(MOD_BIT(code)); - send_keyboard_report(); - } #ifdef EXTRAKEY_ENABLE - else if IS_SYSTEM (code) { - host_system_send(KEYCODE2SYSTEM(code)); - } else if IS_CONSUMER (code) { - host_consumer_send(KEYCODE2CONSUMER(code)); - } + else if + IS_SYSTEM(code) { host_system_send(KEYCODE2SYSTEM(code)); } + else if + IS_CONSUMER(code) { host_consumer_send(KEYCODE2CONSUMER(code)); } #endif #ifdef MOUSEKEY_ENABLE - else if IS_MOUSEKEY (code) { - mousekey_on(code); - mousekey_send(); - } + else if + IS_MOUSEKEY(code) { + mousekey_on(code); + mousekey_send(); + } #endif } @@ -911,22 +914,26 @@ void unregister_code(uint8_t code) { } #endif - else if IS_KEY (code) { - del_key(code); - send_keyboard_report(); - } else if IS_MOD (code) { - del_mods(MOD_BIT(code)); - send_keyboard_report(); - } else if IS_SYSTEM (code) { - host_system_send(0); - } else if IS_CONSUMER (code) { - host_consumer_send(0); - } + else if + IS_KEY(code) { + del_key(code); + send_keyboard_report(); + } + else if + IS_MOD(code) { + del_mods(MOD_BIT(code)); + send_keyboard_report(); + } + else if + IS_SYSTEM(code) { host_system_send(0); } + else if + IS_CONSUMER(code) { host_consumer_send(0); } #ifdef MOUSEKEY_ENABLE - else if IS_MOUSEKEY (code) { - mousekey_off(code); - mousekey_send(); - } + else if + IS_MOUSEKEY(code) { + mousekey_off(code); + mousekey_send(); + } #endif } diff --git a/quantum/action.h b/quantum/action.h index 8a357ded87..b562f18c5b 100644 --- a/quantum/action.h +++ b/quantum/action.h @@ -88,7 +88,7 @@ extern bool disable_action_cache; /* Code for handling one-handed key modifiers. */ #ifdef SWAP_HANDS_ENABLE -extern bool swap_hands; +extern bool swap_hands; extern const keypos_t PROGMEM hand_swap_config[MATRIX_ROWS][MATRIX_COLS]; # if (MATRIX_COLS <= 8) typedef uint8_t swap_state_row_t; diff --git a/quantum/action_tapping.c b/quantum/action_tapping.c index 36839f9faf..60e56fb811 100644 --- a/quantum/action_tapping.c +++ b/quantum/action_tapping.c @@ -18,11 +18,11 @@ # define IS_TAPPING_PRESSED() (IS_TAPPING() && tapping_key.event.pressed) # define IS_TAPPING_RELEASED() (IS_TAPPING() && !tapping_key.event.pressed) # define IS_TAPPING_KEY(k) (IS_TAPPING() && KEYEQ(tapping_key.event.key, (k))) -#ifndef COMBO_ENABLE -# define IS_TAPPING_RECORD(r) (IS_TAPPING() && KEYEQ(tapping_key.event.key, (r->event.key))) -#else -# define IS_TAPPING_RECORD(r) (IS_TAPPING() && KEYEQ(tapping_key.event.key, (r->event.key)) && tapping_key.keycode == r->keycode) -#endif +# ifndef COMBO_ENABLE +# define IS_TAPPING_RECORD(r) (IS_TAPPING() && KEYEQ(tapping_key.event.key, (r->event.key))) +# else +# define IS_TAPPING_RECORD(r) (IS_TAPPING() && KEYEQ(tapping_key.event.key, (r->event.key)) && tapping_key.keycode == r->keycode) +# endif __attribute__((weak)) uint16_t get_tapping_term(uint16_t keycode, keyrecord_t *record) { return TAPPING_TERM; } @@ -212,11 +212,15 @@ bool process_tapping(keyrecord_t *keyp) { if (tapping_key.tap.count > 1) { debug("Tapping: Start new tap with releasing last tap(>1).\n"); // unregister key - process_record(&(keyrecord_t){.tap = tapping_key.tap, .event.key = tapping_key.event.key, .event.time = event.time, .event.pressed = false, -#ifdef COMBO_ENABLE - .keycode = tapping_key.keycode, -#endif - }); + process_record(&(keyrecord_t){ + .tap = tapping_key.tap, + .event.key = tapping_key.event.key, + .event.time = event.time, + .event.pressed = false, +# ifdef COMBO_ENABLE + .keycode = tapping_key.keycode, +# endif + }); } else { debug("Tapping: Start while last tap(1).\n"); } @@ -254,11 +258,15 @@ bool process_tapping(keyrecord_t *keyp) { if (tapping_key.tap.count > 1) { debug("Tapping: Start new tap with releasing last timeout tap(>1).\n"); // unregister key - process_record(&(keyrecord_t){.tap = tapping_key.tap, .event.key = tapping_key.event.key, .event.time = event.time, .event.pressed = false, -#ifdef COMBO_ENABLE - .keycode = tapping_key.keycode, -#endif - }); + process_record(&(keyrecord_t){ + .tap = tapping_key.tap, + .event.key = tapping_key.event.key, + .event.time = event.time, + .event.pressed = false, +# ifdef COMBO_ENABLE + .keycode = tapping_key.keycode, +# endif + }); } else { debug("Tapping: Start while last timeout tap(1).\n"); } diff --git a/quantum/debounce/asym_eager_defer_pk.c b/quantum/debounce/asym_eager_defer_pk.c index 24380dc5e5..81f39383c4 100644 --- a/quantum/debounce/asym_eager_defer_pk.c +++ b/quantum/debounce/asym_eager_defer_pk.c @@ -46,17 +46,17 @@ When no state changes have occured for DEBOUNCE milliseconds, we push the state. #define ROW_SHIFTER ((matrix_row_t)1) typedef struct { - bool pressed : 1; + bool pressed : 1; uint8_t time : 7; } debounce_counter_t; #if DEBOUNCE > 0 static debounce_counter_t *debounce_counters; -static fast_timer_t last_time; -static bool counters_need_update; -static bool matrix_need_update; +static fast_timer_t last_time; +static bool counters_need_update; +static bool matrix_need_update; -#define DEBOUNCE_ELAPSED 0 +# define DEBOUNCE_ELAPSED 0 static void update_debounce_counters_and_transfer_if_expired(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, uint8_t elapsed_time); static void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows); @@ -64,7 +64,7 @@ static void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], ui // we use num_rows rather than MATRIX_ROWS to support split keyboards void debounce_init(uint8_t num_rows) { debounce_counters = malloc(num_rows * MATRIX_COLS * sizeof(debounce_counter_t)); - int i = 0; + int i = 0; for (uint8_t r = 0; r < num_rows; r++) { for (uint8_t c = 0; c < MATRIX_COLS; c++) { debounce_counters[i++].time = DEBOUNCE_ELAPSED; @@ -81,10 +81,10 @@ void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool bool updated_last = false; if (counters_need_update) { - fast_timer_t now = timer_read_fast(); + fast_timer_t now = timer_read_fast(); fast_timer_t elapsed_time = TIMER_DIFF_FAST(now, last_time); - last_time = now; + last_time = now; updated_last = true; if (elapsed_time > UINT8_MAX) { elapsed_time = UINT8_MAX; @@ -108,7 +108,7 @@ static void update_debounce_counters_and_transfer_if_expired(matrix_row_t raw[], debounce_counter_t *debounce_pointer = debounce_counters; counters_need_update = false; - matrix_need_update = false; + matrix_need_update = false; for (uint8_t row = 0; row < num_rows; row++) { for (uint8_t col = 0; col < MATRIX_COLS; col++) { @@ -146,8 +146,8 @@ static void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], ui if (delta & col_mask) { if (debounce_pointer->time == DEBOUNCE_ELAPSED) { debounce_pointer->pressed = (raw[row] & col_mask); - debounce_pointer->time = DEBOUNCE; - counters_need_update = true; + debounce_pointer->time = DEBOUNCE; + counters_need_update = true; if (debounce_pointer->pressed) { // key-down: eager diff --git a/quantum/debounce/sym_defer_g.c b/quantum/debounce/sym_defer_g.c index fbefd55ede..9155eb914c 100644 --- a/quantum/debounce/sym_defer_g.c +++ b/quantum/debounce/sym_defer_g.c @@ -25,7 +25,7 @@ When no state changes have occured for DEBOUNCE milliseconds, we push the state. #endif #if DEBOUNCE > 0 -static bool debouncing = false; +static bool debouncing = false; static fast_timer_t debouncing_time; void debounce_init(uint8_t num_rows) {} diff --git a/quantum/debounce/sym_defer_pk.c b/quantum/debounce/sym_defer_pk.c index 626a9be841..1b698ba347 100644 --- a/quantum/debounce/sym_defer_pk.c +++ b/quantum/debounce/sym_defer_pk.c @@ -49,7 +49,7 @@ static debounce_counter_t *debounce_counters; static fast_timer_t last_time; static bool counters_need_update; -#define DEBOUNCE_ELAPSED 0 +# define DEBOUNCE_ELAPSED 0 static void update_debounce_counters_and_transfer_if_expired(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, uint8_t elapsed_time); static void start_debounce_counters(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows); @@ -74,10 +74,10 @@ void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool bool updated_last = false; if (counters_need_update) { - fast_timer_t now = timer_read_fast(); + fast_timer_t now = timer_read_fast(); fast_timer_t elapsed_time = TIMER_DIFF_FAST(now, last_time); - last_time = now; + last_time = now; updated_last = true; if (elapsed_time > UINT8_MAX) { elapsed_time = UINT8_MAX; diff --git a/quantum/debounce/sym_eager_pk.c b/quantum/debounce/sym_eager_pk.c index 15a3242e68..9da000ea9a 100644 --- a/quantum/debounce/sym_eager_pk.c +++ b/quantum/debounce/sym_eager_pk.c @@ -50,7 +50,7 @@ static fast_timer_t last_time; static bool counters_need_update; static bool matrix_need_update; -#define DEBOUNCE_ELAPSED 0 +# define DEBOUNCE_ELAPSED 0 static void update_debounce_counters(uint8_t num_rows, uint8_t elapsed_time); static void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows); @@ -75,10 +75,10 @@ void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool bool updated_last = false; if (counters_need_update) { - fast_timer_t now = timer_read_fast(); + fast_timer_t now = timer_read_fast(); fast_timer_t elapsed_time = TIMER_DIFF_FAST(now, last_time); - last_time = now; + last_time = now; updated_last = true; if (elapsed_time > UINT8_MAX) { elapsed_time = UINT8_MAX; @@ -107,7 +107,7 @@ static void update_debounce_counters(uint8_t num_rows, uint8_t elapsed_time) { for (uint8_t col = 0; col < MATRIX_COLS; col++) { if (*debounce_pointer != DEBOUNCE_ELAPSED) { if (*debounce_pointer <= elapsed_time) { - *debounce_pointer = DEBOUNCE_ELAPSED; + *debounce_pointer = DEBOUNCE_ELAPSED; matrix_need_update = true; } else { *debounce_pointer -= elapsed_time; diff --git a/quantum/debounce/sym_eager_pr.c b/quantum/debounce/sym_eager_pr.c index 2ad592c5a6..eda92a263b 100644 --- a/quantum/debounce/sym_eager_pr.c +++ b/quantum/debounce/sym_eager_pr.c @@ -49,7 +49,7 @@ static debounce_counter_t *debounce_counters; static fast_timer_t last_time; static bool counters_need_update; -#define DEBOUNCE_ELAPSED 0 +# define DEBOUNCE_ELAPSED 0 static void update_debounce_counters(uint8_t num_rows, uint8_t elapsed_time); static void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows); @@ -71,10 +71,10 @@ void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool bool updated_last = false; if (counters_need_update) { - fast_timer_t now = timer_read_fast(); + fast_timer_t now = timer_read_fast(); fast_timer_t elapsed_time = TIMER_DIFF_FAST(now, last_time); - last_time = now; + last_time = now; updated_last = true; if (elapsed_time > UINT8_MAX) { elapsed_time = UINT8_MAX; @@ -102,7 +102,7 @@ static void update_debounce_counters(uint8_t num_rows, uint8_t elapsed_time) { for (uint8_t row = 0; row < num_rows; row++) { if (*debounce_pointer != DEBOUNCE_ELAPSED) { if (*debounce_pointer <= elapsed_time) { - *debounce_pointer = DEBOUNCE_ELAPSED; + *debounce_pointer = DEBOUNCE_ELAPSED; matrix_need_update = true; } else { *debounce_pointer -= elapsed_time; diff --git a/quantum/debounce/tests/asym_eager_defer_pk_tests.cpp b/quantum/debounce/tests/asym_eager_defer_pk_tests.cpp index fe374c3dfa..44b4fe1956 100644 --- a/quantum/debounce/tests/asym_eager_defer_pk_tests.cpp +++ b/quantum/debounce/tests/asym_eager_defer_pk_tests.cpp @@ -19,7 +19,8 @@ #include "debounce_test_common.h" TEST_F(DebounceTest, OneKeyShort1) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Release key after 1ms delay */ {1, {{0, 1, UP}}, {}}, @@ -43,7 +44,8 @@ TEST_F(DebounceTest, OneKeyShort1) { } TEST_F(DebounceTest, OneKeyShort2) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Release key after 2ms delay */ {2, {{0, 1, UP}}, {}}, @@ -58,7 +60,8 @@ TEST_F(DebounceTest, OneKeyShort2) { } TEST_F(DebounceTest, OneKeyShort3) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Release key after 3ms delay */ {3, {{0, 1, UP}}, {}}, @@ -73,7 +76,8 @@ TEST_F(DebounceTest, OneKeyShort3) { } TEST_F(DebounceTest, OneKeyShort4) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Release key after 4ms delay */ {4, {{0, 1, UP}}, {}}, @@ -88,7 +92,8 @@ TEST_F(DebounceTest, OneKeyShort4) { } TEST_F(DebounceTest, OneKeyShort5) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Release key after 5ms delay */ @@ -102,7 +107,8 @@ TEST_F(DebounceTest, OneKeyShort5) { } TEST_F(DebounceTest, OneKeyShort6) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Release key after 6ms delay */ @@ -116,7 +122,8 @@ TEST_F(DebounceTest, OneKeyShort6) { } TEST_F(DebounceTest, OneKeyShort7) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Release key after 7ms delay */ @@ -130,7 +137,8 @@ TEST_F(DebounceTest, OneKeyShort7) { } TEST_F(DebounceTest, OneKeyShort8) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Release key after 1ms delay */ {1, {{0, 1, UP}}, {}}, @@ -145,7 +153,8 @@ TEST_F(DebounceTest, OneKeyShort8) { } TEST_F(DebounceTest, OneKeyShort9) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Release key after 1ms delay */ {1, {{0, 1, UP}}, {}}, @@ -159,7 +168,8 @@ TEST_F(DebounceTest, OneKeyShort9) { } TEST_F(DebounceTest, OneKeyBouncing1) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {1, {{0, 1, UP}}, {}}, {2, {{0, 1, DOWN}}, {}}, @@ -185,7 +195,8 @@ TEST_F(DebounceTest, OneKeyBouncing1) { } TEST_F(DebounceTest, OneKeyBouncing2) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Change twice in the same time period */ {1, {{0, 1, UP}}, {}}, @@ -217,7 +228,8 @@ TEST_F(DebounceTest, OneKeyBouncing2) { } TEST_F(DebounceTest, OneKeyLong) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {25, {{0, 1, UP}}, {}}, @@ -236,7 +248,8 @@ TEST_F(DebounceTest, OneKeyLong) { } TEST_F(DebounceTest, TwoKeysShort) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {1, {{0, 2, DOWN}}, {{0, 2, DOWN}}}, /* Release key after 2ms delay */ @@ -249,14 +262,14 @@ TEST_F(DebounceTest, TwoKeysShort) { {10, {}, {{0, 1, UP}}}, /* 5ms+5ms after DOWN at time 0 */ /* Press key again after 1ms delay */ {11, {{0, 1, DOWN}}, {{0, 1, DOWN}, {0, 2, UP}}}, /* 5ms+5ms after DOWN at time 0 */ - {12, {{0, 2, DOWN}}, {{0, 2, DOWN}}}, /* 5ms+5ms after DOWN at time 0 */ + {12, {{0, 2, DOWN}}, {{0, 2, DOWN}}}, /* 5ms+5ms after DOWN at time 0 */ }); runEvents(); } - TEST_F(DebounceTest, OneKeyDelayedScan1) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Processing is very late, immediately release key */ @@ -269,7 +282,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan1) { } TEST_F(DebounceTest, OneKeyDelayedScan2) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Processing is very late, immediately release key */ @@ -283,7 +297,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan2) { } TEST_F(DebounceTest, OneKeyDelayedScan3) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Processing is very late */ @@ -298,7 +313,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan3) { } TEST_F(DebounceTest, OneKeyDelayedScan4) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Processing is very late */ @@ -314,7 +330,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan4) { } TEST_F(DebounceTest, OneKeyDelayedScan5) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {5, {{0, 1, UP}}, {}}, @@ -329,7 +346,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan5) { } TEST_F(DebounceTest, OneKeyDelayedScan6) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {5, {{0, 1, UP}}, {}}, @@ -345,7 +363,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan6) { } TEST_F(DebounceTest, OneKeyDelayedScan7) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {5, {{0, 1, UP}}, {}}, @@ -358,7 +377,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan7) { } TEST_F(DebounceTest, OneKeyDelayedScan8) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Processing is a bit late */ diff --git a/quantum/debounce/tests/debounce_test_common.cpp b/quantum/debounce/tests/debounce_test_common.cpp index 1c5e7c9f4e..f9414e571d 100644 --- a/quantum/debounce/tests/debounce_test_common.cpp +++ b/quantum/debounce/tests/debounce_test_common.cpp @@ -31,9 +31,7 @@ void set_time(uint32_t t); void advance_time(uint32_t ms); } -void DebounceTest::addEvents(std::initializer_list events) { - events_.insert(events_.end(), events.begin(), events.end()); -} +void DebounceTest::addEvents(std::initializer_list events) { events_.insert(events_.end(), events.begin(), events.end()); } void DebounceTest::runEvents() { /* Run the test multiple times, from 1kHz to 10kHz scan rate */ @@ -54,7 +52,7 @@ void DebounceTest::runEvents() { void DebounceTest::runEventsInternal() { fast_timer_t previous = 0; - bool first = true; + bool first = true; /* Initialise keyboard with start time (offset to avoid testing at 0) and all keys UP */ debounce_init(MATRIX_ROWS); @@ -80,7 +78,7 @@ void DebounceTest::runEventsInternal() { } } - first = false; + first = false; previous = event.time_; /* Prepare input matrix */ @@ -98,12 +96,7 @@ void DebounceTest::runEventsInternal() { /* Check output matrix has expected change events */ for (auto &output : event.outputs_) { - EXPECT_EQ(!!(cooked_matrix_[output.row_] & (1U << output.col_)), directionValue(output.direction_)) - << "Missing event at " << strTime() - << " expected key " << output.row_ << "," << output.col_ << " " << directionLabel(output.direction_) - << "\ninput_matrix: changed=" << !event.inputs_.empty() << "\n" << strMatrix(input_matrix_) - << "\nexpected_matrix:\n" << strMatrix(output_matrix_) - << "\nactual_matrix:\n" << strMatrix(cooked_matrix_); + EXPECT_EQ(!!(cooked_matrix_[output.row_] & (1U << output.col_)), directionValue(output.direction_)) << "Missing event at " << strTime() << " expected key " << output.row_ << "," << output.col_ << " " << directionLabel(output.direction_) << "\ninput_matrix: changed=" << !event.inputs_.empty() << "\n" << strMatrix(input_matrix_) << "\nexpected_matrix:\n" << strMatrix(output_matrix_) << "\nactual_matrix:\n" << strMatrix(cooked_matrix_); } /* Check output matrix has no other changes */ @@ -133,27 +126,20 @@ void DebounceTest::runDebounce(bool changed) { debounce(raw_matrix_, cooked_matrix_, MATRIX_ROWS, changed); if (!std::equal(std::begin(input_matrix_), std::end(input_matrix_), std::begin(raw_matrix_))) { - FAIL() << "Fatal error: debounce() modified raw matrix at " << strTime() - << "\ninput_matrix: changed=" << changed << "\n" << strMatrix(input_matrix_) - << "\nraw_matrix:\n" << strMatrix(raw_matrix_); + FAIL() << "Fatal error: debounce() modified raw matrix at " << strTime() << "\ninput_matrix: changed=" << changed << "\n" << strMatrix(input_matrix_) << "\nraw_matrix:\n" << strMatrix(raw_matrix_); } } void DebounceTest::checkCookedMatrix(bool changed, const std::string &error_message) { if (!std::equal(std::begin(output_matrix_), std::end(output_matrix_), std::begin(cooked_matrix_))) { - FAIL() << "Unexpected event: " << error_message << " at " << strTime() - << "\ninput_matrix: changed=" << changed << "\n" << strMatrix(input_matrix_) - << "\nexpected_matrix:\n" << strMatrix(output_matrix_) - << "\nactual_matrix:\n" << strMatrix(cooked_matrix_); + FAIL() << "Unexpected event: " << error_message << " at " << strTime() << "\ninput_matrix: changed=" << changed << "\n" << strMatrix(input_matrix_) << "\nexpected_matrix:\n" << strMatrix(output_matrix_) << "\nactual_matrix:\n" << strMatrix(cooked_matrix_); } } std::string DebounceTest::strTime() { std::stringstream text; - text << "time " << (timer_read_fast() - time_offset_) - << " (extra_iterations=" << extra_iterations_ - << ", auto_advance_time=" << auto_advance_time_ << ")"; + text << "time " << (timer_read_fast() - time_offset_) << " (extra_iterations=" << extra_iterations_ << ", auto_advance_time=" << auto_advance_time_ << ")"; return text.str(); } @@ -181,49 +167,39 @@ std::string DebounceTest::strMatrix(matrix_row_t matrix[]) { bool DebounceTest::directionValue(Direction direction) { switch (direction) { - case DOWN: - return true; + case DOWN: + return true; - case UP: - return false; + case UP: + return false; } } std::string DebounceTest::directionLabel(Direction direction) { switch (direction) { - case DOWN: - return "DOWN"; + case DOWN: + return "DOWN"; - case UP: - return "UP"; + case UP: + return "UP"; } } /* Modify a matrix and verify that events always specify a change */ void DebounceTest::matrixUpdate(matrix_row_t matrix[], const std::string &name, const MatrixTestEvent &event) { - ASSERT_NE(!!(matrix[event.row_] & (1U << event.col_)), directionValue(event.direction_)) - << "Test " << name << " at " << strTime() - << " sets key " << event.row_ << "," << event.col_ << " " << directionLabel(event.direction_) - << " but it is already " << directionLabel(event.direction_) - << "\n" << name << "_matrix:\n" << strMatrix(matrix); + ASSERT_NE(!!(matrix[event.row_] & (1U << event.col_)), directionValue(event.direction_)) << "Test " << name << " at " << strTime() << " sets key " << event.row_ << "," << event.col_ << " " << directionLabel(event.direction_) << " but it is already " << directionLabel(event.direction_) << "\n" << name << "_matrix:\n" << strMatrix(matrix); switch (event.direction_) { - case DOWN: - matrix[event.row_] |= (1U << event.col_); - break; + case DOWN: + matrix[event.row_] |= (1U << event.col_); + break; - case UP: - matrix[event.row_] &= ~(1U << event.col_); - break; + case UP: + matrix[event.row_] &= ~(1U << event.col_); + break; } } -DebounceTestEvent::DebounceTestEvent(fast_timer_t time, - std::initializer_list inputs, - std::initializer_list outputs) - : time_(time), inputs_(inputs), outputs_(outputs) { -} +DebounceTestEvent::DebounceTestEvent(fast_timer_t time, std::initializer_list inputs, std::initializer_list outputs) : time_(time), inputs_(inputs), outputs_(outputs) {} -MatrixTestEvent::MatrixTestEvent(int row, int col, Direction direction) - : row_(row), col_(col), direction_(direction) { -} +MatrixTestEvent::MatrixTestEvent(int row, int col, Direction direction) : row_(row), col_(col), direction_(direction) {} diff --git a/quantum/debounce/tests/debounce_test_common.h b/quantum/debounce/tests/debounce_test_common.h index d87e310594..b7becb3782 100644 --- a/quantum/debounce/tests/debounce_test_common.h +++ b/quantum/debounce/tests/debounce_test_common.h @@ -31,36 +31,34 @@ enum Direction { }; class MatrixTestEvent { -public: + public: MatrixTestEvent(int row, int col, Direction direction); - const int row_; - const int col_; + const int row_; + const int col_; const Direction direction_; }; class DebounceTestEvent { -public: + public: // 0, {{0, 1, DOWN}}, {{0, 1, DOWN}}) - DebounceTestEvent(fast_timer_t time, - std::initializer_list inputs, - std::initializer_list outputs); + DebounceTestEvent(fast_timer_t time, std::initializer_list inputs, std::initializer_list outputs); - const fast_timer_t time_; + const fast_timer_t time_; const std::list inputs_; const std::list outputs_; }; class DebounceTest : public ::testing::Test { -protected: + protected: void addEvents(std::initializer_list events); void runEvents(); fast_timer_t time_offset_ = 7777; - bool time_jumps_ = false; + bool time_jumps_ = false; -private: - static bool directionValue(Direction direction); + private: + static bool directionValue(Direction direction); static std::string directionLabel(Direction direction); void runEventsInternal(); @@ -78,6 +76,6 @@ private: matrix_row_t cooked_matrix_[MATRIX_ROWS]; matrix_row_t output_matrix_[MATRIX_ROWS]; - int extra_iterations_; + int extra_iterations_; bool auto_advance_time_; }; diff --git a/quantum/debounce/tests/sym_defer_g_tests.cpp b/quantum/debounce/tests/sym_defer_g_tests.cpp index a56aecd8f3..73d3d45e30 100644 --- a/quantum/debounce/tests/sym_defer_g_tests.cpp +++ b/quantum/debounce/tests/sym_defer_g_tests.cpp @@ -19,7 +19,8 @@ #include "debounce_test_common.h" TEST_F(DebounceTest, OneKeyShort1) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, {5, {}, {{0, 1, DOWN}}}, @@ -32,7 +33,8 @@ TEST_F(DebounceTest, OneKeyShort1) { } TEST_F(DebounceTest, OneKeyShort2) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, {5, {}, {{0, 1, DOWN}}}, @@ -45,7 +47,8 @@ TEST_F(DebounceTest, OneKeyShort2) { } TEST_F(DebounceTest, OneKeyShort3) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, {5, {}, {{0, 1, DOWN}}}, @@ -58,7 +61,8 @@ TEST_F(DebounceTest, OneKeyShort3) { } TEST_F(DebounceTest, OneKeyTooQuick1) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, /* Release key exactly on the debounce time */ {5, {{0, 1, UP}}, {}}, @@ -67,7 +71,8 @@ TEST_F(DebounceTest, OneKeyTooQuick1) { } TEST_F(DebounceTest, OneKeyTooQuick2) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, {5, {}, {{0, 1, DOWN}}}, @@ -80,7 +85,8 @@ TEST_F(DebounceTest, OneKeyTooQuick2) { } TEST_F(DebounceTest, OneKeyBouncing1) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, {1, {{0, 1, UP}}, {}}, {2, {{0, 1, DOWN}}, {}}, @@ -94,7 +100,8 @@ TEST_F(DebounceTest, OneKeyBouncing1) { } TEST_F(DebounceTest, OneKeyBouncing2) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, {5, {}, {{0, 1, DOWN}}}, {6, {{0, 1, UP}}, {}}, @@ -108,7 +115,8 @@ TEST_F(DebounceTest, OneKeyBouncing2) { } TEST_F(DebounceTest, OneKeyLong) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, {5, {}, {{0, 1, DOWN}}}, @@ -125,7 +133,8 @@ TEST_F(DebounceTest, OneKeyLong) { } TEST_F(DebounceTest, TwoKeysShort) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, {1, {{0, 2, DOWN}}, {}}, @@ -140,7 +149,8 @@ TEST_F(DebounceTest, TwoKeysShort) { } TEST_F(DebounceTest, TwoKeysSimultaneous1) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}, {0, 2, DOWN}}, {}}, {5, {}, {{0, 1, DOWN}, {0, 2, DOWN}}}, @@ -152,7 +162,8 @@ TEST_F(DebounceTest, TwoKeysSimultaneous1) { } TEST_F(DebounceTest, TwoKeysSimultaneous2) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, {1, {{0, 2, DOWN}}, {}}, @@ -167,7 +178,8 @@ TEST_F(DebounceTest, TwoKeysSimultaneous2) { } TEST_F(DebounceTest, OneKeyDelayedScan1) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, /* Processing is very late */ @@ -182,7 +194,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan1) { } TEST_F(DebounceTest, OneKeyDelayedScan2) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, /* Processing is very late */ @@ -197,7 +210,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan2) { } TEST_F(DebounceTest, OneKeyDelayedScan3) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, /* Release key before debounce expires */ @@ -208,7 +222,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan3) { } TEST_F(DebounceTest, OneKeyDelayedScan4) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, /* Processing is a bit late */ diff --git a/quantum/debounce/tests/sym_defer_pk_tests.cpp b/quantum/debounce/tests/sym_defer_pk_tests.cpp index 1f3061e59c..7542c2dad4 100644 --- a/quantum/debounce/tests/sym_defer_pk_tests.cpp +++ b/quantum/debounce/tests/sym_defer_pk_tests.cpp @@ -19,7 +19,8 @@ #include "debounce_test_common.h" TEST_F(DebounceTest, OneKeyShort1) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, {5, {}, {{0, 1, DOWN}}}, @@ -32,7 +33,8 @@ TEST_F(DebounceTest, OneKeyShort1) { } TEST_F(DebounceTest, OneKeyShort2) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, {5, {}, {{0, 1, DOWN}}}, @@ -45,7 +47,8 @@ TEST_F(DebounceTest, OneKeyShort2) { } TEST_F(DebounceTest, OneKeyShort3) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, {5, {}, {{0, 1, DOWN}}}, @@ -58,7 +61,8 @@ TEST_F(DebounceTest, OneKeyShort3) { } TEST_F(DebounceTest, OneKeyTooQuick1) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, /* Release key exactly on the debounce time */ {5, {{0, 1, UP}}, {}}, @@ -67,7 +71,8 @@ TEST_F(DebounceTest, OneKeyTooQuick1) { } TEST_F(DebounceTest, OneKeyTooQuick2) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, {5, {}, {{0, 1, DOWN}}}, @@ -80,7 +85,8 @@ TEST_F(DebounceTest, OneKeyTooQuick2) { } TEST_F(DebounceTest, OneKeyBouncing1) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, {1, {{0, 1, UP}}, {}}, {2, {{0, 1, DOWN}}, {}}, @@ -94,7 +100,8 @@ TEST_F(DebounceTest, OneKeyBouncing1) { } TEST_F(DebounceTest, OneKeyBouncing2) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, {5, {}, {{0, 1, DOWN}}}, {6, {{0, 1, UP}}, {}}, @@ -108,7 +115,8 @@ TEST_F(DebounceTest, OneKeyBouncing2) { } TEST_F(DebounceTest, OneKeyLong) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, {5, {}, {{0, 1, DOWN}}}, @@ -125,7 +133,8 @@ TEST_F(DebounceTest, OneKeyLong) { } TEST_F(DebounceTest, TwoKeysShort) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, {1, {{0, 2, DOWN}}, {}}, @@ -142,7 +151,8 @@ TEST_F(DebounceTest, TwoKeysShort) { } TEST_F(DebounceTest, TwoKeysSimultaneous1) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}, {0, 2, DOWN}}, {}}, {5, {}, {{0, 1, DOWN}, {0, 2, DOWN}}}, @@ -154,7 +164,8 @@ TEST_F(DebounceTest, TwoKeysSimultaneous1) { } TEST_F(DebounceTest, TwoKeysSimultaneous2) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, {1, {{0, 2, DOWN}}, {}}, @@ -169,7 +180,8 @@ TEST_F(DebounceTest, TwoKeysSimultaneous2) { } TEST_F(DebounceTest, OneKeyDelayedScan1) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, /* Processing is very late */ @@ -184,7 +196,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan1) { } TEST_F(DebounceTest, OneKeyDelayedScan2) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, /* Processing is very late */ @@ -199,7 +212,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan2) { } TEST_F(DebounceTest, OneKeyDelayedScan3) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, /* Release key before debounce expires */ @@ -210,7 +224,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan3) { } TEST_F(DebounceTest, OneKeyDelayedScan4) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, /* Processing is a bit late */ diff --git a/quantum/debounce/tests/sym_eager_pk_tests.cpp b/quantum/debounce/tests/sym_eager_pk_tests.cpp index e0fc205e33..d9a02fe33c 100644 --- a/quantum/debounce/tests/sym_eager_pk_tests.cpp +++ b/quantum/debounce/tests/sym_eager_pk_tests.cpp @@ -19,7 +19,8 @@ #include "debounce_test_common.h" TEST_F(DebounceTest, OneKeyShort1) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {1, {{0, 1, UP}}, {}}, @@ -32,7 +33,8 @@ TEST_F(DebounceTest, OneKeyShort1) { } TEST_F(DebounceTest, OneKeyShort2) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {1, {{0, 1, UP}}, {}}, @@ -45,7 +47,8 @@ TEST_F(DebounceTest, OneKeyShort2) { } TEST_F(DebounceTest, OneKeyShort3) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {1, {{0, 1, UP}}, {}}, @@ -58,7 +61,8 @@ TEST_F(DebounceTest, OneKeyShort3) { } TEST_F(DebounceTest, OneKeyShort4) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {1, {{0, 1, UP}}, {}}, @@ -71,7 +75,8 @@ TEST_F(DebounceTest, OneKeyShort4) { } TEST_F(DebounceTest, OneKeyShort5) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {1, {{0, 1, UP}}, {}}, @@ -83,7 +88,8 @@ TEST_F(DebounceTest, OneKeyShort5) { } TEST_F(DebounceTest, OneKeyShort6) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {1, {{0, 1, UP}}, {}}, @@ -95,7 +101,8 @@ TEST_F(DebounceTest, OneKeyShort6) { } TEST_F(DebounceTest, OneKeyBouncing1) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {1, {{0, 1, UP}}, {}}, {2, {{0, 1, DOWN}}, {}}, @@ -110,7 +117,8 @@ TEST_F(DebounceTest, OneKeyBouncing1) { } TEST_F(DebounceTest, OneKeyBouncing2) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Change twice in the same time period */ {1, {{0, 1, UP}}, {}}, @@ -135,7 +143,8 @@ TEST_F(DebounceTest, OneKeyBouncing2) { } TEST_F(DebounceTest, OneKeyLong) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {25, {{0, 1, UP}}, {{0, 1, UP}}}, @@ -146,7 +155,8 @@ TEST_F(DebounceTest, OneKeyLong) { } TEST_F(DebounceTest, TwoKeysShort) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {1, {{0, 1, UP}}, {}}, {2, {{0, 2, DOWN}}, {{0, 2, DOWN}}}, @@ -167,7 +177,8 @@ TEST_F(DebounceTest, TwoKeysShort) { } TEST_F(DebounceTest, OneKeyDelayedScan1) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Processing is very late but the change will now be accepted */ @@ -178,7 +189,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan1) { } TEST_F(DebounceTest, OneKeyDelayedScan2) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Processing is very late but the change will now be accepted even with a 1 scan delay */ @@ -190,7 +202,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan2) { } TEST_F(DebounceTest, OneKeyDelayedScan3) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Processing is very late but the change will now be accepted even with a 1ms delay */ @@ -202,7 +215,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan3) { } TEST_F(DebounceTest, OneKeyDelayedScan4) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Processing is a bit late but the change will now be accepted */ @@ -213,7 +227,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan4) { } TEST_F(DebounceTest, OneKeyDelayedScan5) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Processing is very late but the change will now be accepted even with a 1 scan delay */ @@ -225,7 +240,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan5) { } TEST_F(DebounceTest, OneKeyDelayedScan6) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Processing is very late but the change will now be accepted even with a 1ms delay */ diff --git a/quantum/debounce/tests/sym_eager_pr_tests.cpp b/quantum/debounce/tests/sym_eager_pr_tests.cpp index 2c4bca127e..e91dd9cb87 100644 --- a/quantum/debounce/tests/sym_eager_pr_tests.cpp +++ b/quantum/debounce/tests/sym_eager_pr_tests.cpp @@ -19,7 +19,8 @@ #include "debounce_test_common.h" TEST_F(DebounceTest, OneKeyShort1) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {1, {{0, 1, UP}}, {}}, @@ -32,7 +33,8 @@ TEST_F(DebounceTest, OneKeyShort1) { } TEST_F(DebounceTest, OneKeyShort2) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {1, {{0, 1, UP}}, {}}, @@ -45,7 +47,8 @@ TEST_F(DebounceTest, OneKeyShort2) { } TEST_F(DebounceTest, OneKeyShort3) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {1, {{0, 1, UP}}, {}}, @@ -58,7 +61,8 @@ TEST_F(DebounceTest, OneKeyShort3) { } TEST_F(DebounceTest, OneKeyShort4) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {1, {{0, 1, UP}}, {}}, @@ -71,7 +75,8 @@ TEST_F(DebounceTest, OneKeyShort4) { } TEST_F(DebounceTest, OneKeyShort5) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {1, {{0, 1, UP}}, {}}, @@ -83,7 +88,8 @@ TEST_F(DebounceTest, OneKeyShort5) { } TEST_F(DebounceTest, OneKeyShort6) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {1, {{0, 1, UP}}, {}}, @@ -95,7 +101,8 @@ TEST_F(DebounceTest, OneKeyShort6) { } TEST_F(DebounceTest, OneKeyBouncing1) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {1, {{0, 1, UP}}, {}}, {2, {{0, 1, DOWN}}, {}}, @@ -110,7 +117,8 @@ TEST_F(DebounceTest, OneKeyBouncing1) { } TEST_F(DebounceTest, OneKeyBouncing2) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Change twice in the same time period */ {1, {{0, 1, UP}}, {}}, @@ -135,7 +143,8 @@ TEST_F(DebounceTest, OneKeyBouncing2) { } TEST_F(DebounceTest, OneKeyLong) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {25, {{0, 1, UP}}, {{0, 1, UP}}}, @@ -146,7 +155,8 @@ TEST_F(DebounceTest, OneKeyLong) { } TEST_F(DebounceTest, TwoRowsShort) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {1, {{0, 1, UP}}, {}}, {2, {{2, 0, DOWN}}, {{2, 0, DOWN}}}, @@ -167,7 +177,8 @@ TEST_F(DebounceTest, TwoRowsShort) { } TEST_F(DebounceTest, TwoKeysOverlap) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {1, {{0, 1, UP}}, {}}, /* Press a second key during the first debounce */ @@ -190,7 +201,8 @@ TEST_F(DebounceTest, TwoKeysOverlap) { } TEST_F(DebounceTest, TwoKeysSimultaneous1) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}, {0, 2, DOWN}}, {{0, 1, DOWN}, {0, 2, DOWN}}}, {20, {{0, 1, UP}}, {{0, 1, UP}}}, {21, {{0, 2, UP}}, {}}, @@ -202,7 +214,8 @@ TEST_F(DebounceTest, TwoKeysSimultaneous1) { } TEST_F(DebounceTest, TwoKeysSimultaneous2) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}, {0, 2, DOWN}}, {{0, 1, DOWN}, {0, 2, DOWN}}}, {20, {{0, 1, UP}, {0, 2, UP}}, {{0, 1, UP}, {0, 2, UP}}}, }); @@ -210,7 +223,8 @@ TEST_F(DebounceTest, TwoKeysSimultaneous2) { } TEST_F(DebounceTest, OneKeyDelayedScan1) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Processing is very late but the change will now be accepted */ @@ -221,7 +235,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan1) { } TEST_F(DebounceTest, OneKeyDelayedScan2) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Processing is very late but the change will now be accepted even with a 1 scan delay */ @@ -233,7 +248,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan2) { } TEST_F(DebounceTest, OneKeyDelayedScan3) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Processing is very late but the change will now be accepted even with a 1ms delay */ @@ -245,7 +261,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan3) { } TEST_F(DebounceTest, OneKeyDelayedScan4) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Processing is a bit late but the change will now be accepted */ @@ -256,7 +273,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan4) { } TEST_F(DebounceTest, OneKeyDelayedScan5) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Processing is very late but the change will now be accepted even with a 1 scan delay */ @@ -268,7 +286,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan5) { } TEST_F(DebounceTest, OneKeyDelayedScan6) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Processing is very late but the change will now be accepted even with a 1ms delay */ diff --git a/quantum/keymap_extras/keymap_steno.h b/quantum/keymap_extras/keymap_steno.h index ab95b43fdd..310aa07409 100644 --- a/quantum/keymap_extras/keymap_steno.h +++ b/quantum/keymap_extras/keymap_steno.h @@ -74,8 +74,7 @@ enum steno_keycodes { }; #ifdef STENO_COMBINEDMAP -enum steno_combined_keycodes -{ +enum steno_combined_keycodes { STN_S3 = QK_STENO_COMB, STN_TKL, STN_PWL, diff --git a/quantum/process_keycode/process_combo.c b/quantum/process_keycode/process_combo.c index e8661839c7..a050161edf 100644 --- a/quantum/process_keycode/process_combo.c +++ b/quantum/process_keycode/process_combo.c @@ -18,10 +18,9 @@ #include "process_combo.h" #include "action_tapping.h" - #ifdef COMBO_COUNT -__attribute__((weak)) combo_t key_combos[COMBO_COUNT]; -uint16_t COMBO_LEN = COMBO_COUNT; +__attribute__((weak)) combo_t key_combos[COMBO_COUNT]; +uint16_t COMBO_LEN = COMBO_COUNT; #else extern combo_t key_combos[]; extern uint16_t COMBO_LEN; @@ -46,64 +45,86 @@ __attribute__((weak)) bool process_combo_key_release(uint16_t combo_index, combo #endif #ifndef COMBO_NO_TIMER -static uint16_t timer = 0; +static uint16_t timer = 0; #endif -static bool b_combo_enable = true; // defaults to enabled -static uint16_t longest_term = 0; +static bool b_combo_enable = true; // defaults to enabled +static uint16_t longest_term = 0; typedef struct { keyrecord_t record; - uint16_t combo_index; - uint16_t keycode; + uint16_t combo_index; + uint16_t keycode; } queued_record_t; -static uint8_t key_buffer_size = 0; +static uint8_t key_buffer_size = 0; static queued_record_t key_buffer[COMBO_KEY_BUFFER_LENGTH]; typedef struct { uint16_t combo_index; } queued_combo_t; -static uint8_t combo_buffer_write= 0; -static uint8_t combo_buffer_read = 0; +static uint8_t combo_buffer_write = 0; +static uint8_t combo_buffer_read = 0; static queued_combo_t combo_buffer[COMBO_BUFFER_LENGTH]; #define INCREMENT_MOD(i) i = (i + 1) % COMBO_BUFFER_LENGTH -#define COMBO_KEY_POS ((keypos_t){.col=254, .row=254}) - +#define COMBO_KEY_POS ((keypos_t){.col = 254, .row = 254}) #ifndef EXTRA_SHORT_COMBOS /* flags are their own elements in combo_t struct. */ -# define COMBO_ACTIVE(combo) (combo->active) +# define COMBO_ACTIVE(combo) (combo->active) # define COMBO_DISABLED(combo) (combo->disabled) -# define COMBO_STATE(combo) (combo->state) - -# define ACTIVATE_COMBO(combo) do {combo->active = true;}while(0) -# define DEACTIVATE_COMBO(combo) do {combo->active = false;}while(0) -# define DISABLE_COMBO(combo) do {combo->disabled = true;}while(0) -# define RESET_COMBO_STATE(combo) do { \ - combo->disabled = false; \ - combo->state = 0; \ -}while(0) +# define COMBO_STATE(combo) (combo->state) + +# define ACTIVATE_COMBO(combo) \ + do { \ + combo->active = true; \ + } while (0) +# define DEACTIVATE_COMBO(combo) \ + do { \ + combo->active = false; \ + } while (0) +# define DISABLE_COMBO(combo) \ + do { \ + combo->disabled = true; \ + } while (0) +# define RESET_COMBO_STATE(combo) \ + do { \ + combo->disabled = false; \ + combo->state = 0; \ + } while (0) #else /* flags are at the two high bits of state. */ -# define COMBO_ACTIVE(combo) (combo->state & 0x80) +# define COMBO_ACTIVE(combo) (combo->state & 0x80) # define COMBO_DISABLED(combo) (combo->state & 0x40) -# define COMBO_STATE(combo) (combo->state & 0x3F) - -# define ACTIVATE_COMBO(combo) do {combo->state |= 0x80;}while(0) -# define DEACTIVATE_COMBO(combo) do {combo->state &= ~0x80;}while(0) -# define DISABLE_COMBO(combo) do {combo->state |= 0x40;}while(0) -# define RESET_COMBO_STATE(combo) do {combo->state &= ~0x7F;}while(0) +# define COMBO_STATE(combo) (combo->state & 0x3F) + +# define ACTIVATE_COMBO(combo) \ + do { \ + combo->state |= 0x80; \ + } while (0) +# define DEACTIVATE_COMBO(combo) \ + do { \ + combo->state &= ~0x80; \ + } while (0) +# define DISABLE_COMBO(combo) \ + do { \ + combo->state |= 0x40; \ + } while (0) +# define RESET_COMBO_STATE(combo) \ + do { \ + combo->state &= ~0x7F; \ + } while (0) #endif static inline void release_combo(uint16_t combo_index, combo_t *combo) { if (combo->keycode) { keyrecord_t record = { - .event = { - .key = COMBO_KEY_POS, - .time = timer_read()|1, - .pressed = false, - }, + .event = + { + .key = COMBO_KEY_POS, + .time = timer_read() | 1, + .pressed = false, + }, .keycode = combo->keycode, }; #ifndef NO_ACTION_TAPPING @@ -123,18 +144,17 @@ static inline bool _get_combo_must_hold(uint16_t combo_index, combo_t *combo) { #elif defined(COMBO_MUST_HOLD_PER_COMBO) return get_combo_must_hold(combo_index, combo); #elif defined(COMBO_MUST_HOLD_MODS) - return (KEYCODE_IS_MOD(combo->keycode) || - (combo->keycode >= QK_MOMENTARY && combo->keycode <= QK_MOMENTARY_MAX)); + return (KEYCODE_IS_MOD(combo->keycode) || (combo->keycode >= QK_MOMENTARY && combo->keycode <= QK_MOMENTARY_MAX)); #endif return false; } -static inline uint16_t _get_wait_time(uint16_t combo_index, combo_t *combo ) { +static inline uint16_t _get_wait_time(uint16_t combo_index, combo_t *combo) { if (_get_combo_must_hold(combo_index, combo) #ifdef COMBO_MUST_TAP_PER_COMBO - || get_combo_must_tap(combo_index, combo) + || get_combo_must_tap(combo_index, combo) #endif - ) { + ) { if (longest_term < COMBO_HOLD_TERM) { return COMBO_HOLD_TERM; } @@ -144,9 +164,8 @@ static inline uint16_t _get_wait_time(uint16_t combo_index, combo_t *combo ) { } static inline uint16_t _get_combo_term(uint16_t combo_index, combo_t *combo) { - #if defined(COMBO_TERM_PER_COMBO) - return get_combo_term(combo_index, combo); + return get_combo_term(combo_index, combo); #endif return COMBO_TERM; @@ -154,7 +173,7 @@ static inline uint16_t _get_combo_term(uint16_t combo_index, combo_t *combo) { void clear_combos(void) { uint16_t index = 0; - longest_term = 0; + longest_term = 0; for (index = 0; index < COMBO_LEN; ++index) { combo_t *combo = &key_combos[index]; if (!COMBO_ACTIVE(combo)) { @@ -175,7 +194,7 @@ static inline void dump_key_buffer(void) { key_buffer_next = key_buffer_i + 1; queued_record_t *qrecord = &key_buffer[key_buffer_i]; - keyrecord_t *record = &qrecord->record; + keyrecord_t * record = &qrecord->record; if (IS_NOEVENT(record->event)) { continue; @@ -185,9 +204,9 @@ static inline void dump_key_buffer(void) { process_combo_event(qrecord->combo_index, true); } else { #ifndef NO_ACTION_TAPPING - action_tapping_process(*record); + action_tapping_process(*record); #else - process_record(record); + process_record(record); #endif } record->event.time = 0; @@ -242,7 +261,9 @@ void apply_combo(uint16_t combo_index, combo_t *combo) { /* Apply combo's result keycode to the last chord key of the combo and * disable the other keys. */ - if (COMBO_DISABLED(combo)) { return; } + if (COMBO_DISABLED(combo)) { + return; + } // state to check against so we find the last key of the combo from the buffer #if defined(EXTRA_EXTRA_LONG_COMBOS) @@ -254,12 +275,11 @@ void apply_combo(uint16_t combo_index, combo_t *combo) { #endif for (uint8_t key_buffer_i = 0; key_buffer_i < key_buffer_size; key_buffer_i++) { - queued_record_t *qrecord = &key_buffer[key_buffer_i]; - keyrecord_t *record = &qrecord->record; - uint16_t keycode = qrecord->keycode; + keyrecord_t * record = &qrecord->record; + uint16_t keycode = qrecord->keycode; - uint8_t key_count = 0; + uint8_t key_count = 0; uint16_t key_index = -1; _find_key_index_and_count(combo->keys, keycode, &key_index, &key_count); @@ -271,7 +291,7 @@ void apply_combo(uint16_t combo_index, combo_t *combo) { KEY_STATE_DOWN(state, key_index); if (ALL_COMBO_KEYS_ARE_DOWN(state, key_count)) { // this in the end executes the combo when the key_buffer is dumped. - record->keycode = combo->keycode; + record->keycode = combo->keycode; record->event.key = COMBO_KEY_POS; qrecord->combo_index = combo_index; @@ -283,19 +303,15 @@ void apply_combo(uint16_t combo_index, combo_t *combo) { // by making it a TICK event. record->event.time = 0; } - } drop_combo_from_buffer(combo_index); } static inline void apply_combos(void) { // Apply all buffered normal combos. - for (uint8_t i = combo_buffer_read; - i != combo_buffer_write; - INCREMENT_MOD(i)) { - + for (uint8_t i = combo_buffer_read; i != combo_buffer_write; INCREMENT_MOD(i)) { queued_combo_t *buffered_combo = &combo_buffer[i]; - combo_t *combo = &key_combos[buffered_combo->combo_index]; + combo_t * combo = &key_combos[buffered_combo->combo_index]; #ifdef COMBO_MUST_TAP_PER_COMBO if (get_combo_must_tap(buffered_combo->combo_index, combo)) { @@ -310,15 +326,15 @@ static inline void apply_combos(void) { clear_combos(); } -combo_t* overlaps(combo_t *combo1, combo_t *combo2) { +combo_t *overlaps(combo_t *combo1, combo_t *combo2) { /* Checks if the combos overlap and returns the combo that should be * dropped from the combo buffer. * The combo that has less keys will be dropped. If they have the same * amount of keys, drop combo1. */ - uint8_t idx1 = 0, idx2 = 0; + uint8_t idx1 = 0, idx2 = 0; uint16_t key1, key2; - bool overlaps = false; + bool overlaps = false; while ((key1 = pgm_read_word(&combo1->keys[idx1])) != COMBO_END) { idx2 = 0; @@ -335,7 +351,7 @@ combo_t* overlaps(combo_t *combo1, combo_t *combo2) { } static bool process_single_combo(combo_t *combo, uint16_t keycode, keyrecord_t *record, uint16_t combo_index) { - uint8_t key_count = 0; + uint8_t key_count = 0; uint16_t key_index = -1; _find_key_index_and_count(combo->keys, keycode, &key_index, &key_count); @@ -369,12 +385,9 @@ static bool process_single_combo(combo_t *combo, uint16_t keycode, keyrecord_t * // disable readied combos that overlap with this combo combo_t *drop = NULL; - for (uint8_t combo_buffer_i = combo_buffer_read; - combo_buffer_i != combo_buffer_write; - INCREMENT_MOD(combo_buffer_i)) { - - queued_combo_t *qcombo = &combo_buffer[combo_buffer_i]; - combo_t *buffered_combo = &key_combos[qcombo->combo_index]; + for (uint8_t combo_buffer_i = combo_buffer_read; combo_buffer_i != combo_buffer_write; INCREMENT_MOD(combo_buffer_i)) { + queued_combo_t *qcombo = &combo_buffer[combo_buffer_i]; + combo_t * buffered_combo = &key_combos[qcombo->combo_index]; if ((drop = overlaps(buffered_combo, combo))) { DISABLE_COMBO(drop); @@ -387,21 +400,19 @@ static bool process_single_combo(combo_t *combo, uint16_t keycode, keyrecord_t * INCREMENT_MOD(combo_buffer_read); } } - } if (drop != combo) { // save this combo to buffer combo_buffer[combo_buffer_write] = (queued_combo_t){ - .combo_index=combo_index, + .combo_index = combo_index, }; INCREMENT_MOD(combo_buffer_write); // get possible longer waiting time for tap-/hold-only combos. longest_term = _get_wait_time(combo_index, combo); } - } // if timer elapsed end - + } // if timer elapsed end } } else { // chord releases @@ -416,7 +427,7 @@ static bool process_single_combo(combo_t *combo, uint16_t keycode, keyrecord_t * else if (get_combo_must_tap(combo_index, combo)) { // immediately apply tap-only combo apply_combo(combo_index, combo); - apply_combos(); // also apply other prepared combos and dump key buffer + apply_combos(); // also apply other prepared combos and dump key buffer # ifdef COMBO_PROCESS_KEY_RELEASE if (process_combo_key_release(combo_index, combo, key_index, keycode)) { release_combo(combo_index, combo); @@ -424,10 +435,7 @@ static bool process_single_combo(combo_t *combo, uint16_t keycode, keyrecord_t * # endif } #endif - } else if (COMBO_ACTIVE(combo) - && ONLY_ONE_KEY_IS_DOWN(COMBO_STATE(combo)) - && KEY_NOT_YET_RELEASED(COMBO_STATE(combo), key_index) - ) { + } else if (COMBO_ACTIVE(combo) && ONLY_ONE_KEY_IS_DOWN(COMBO_STATE(combo)) && KEY_NOT_YET_RELEASED(COMBO_STATE(combo), key_index)) { /* last key released */ release_combo(combo_index, combo); key_is_part_of_combo = true; @@ -435,9 +443,7 @@ static bool process_single_combo(combo_t *combo, uint16_t keycode, keyrecord_t * #ifdef COMBO_PROCESS_KEY_RELEASE process_combo_key_release(combo_index, combo, key_index, keycode); #endif - } else if (COMBO_ACTIVE(combo) - && KEY_NOT_YET_RELEASED(COMBO_STATE(combo), key_index) - ) { + } else if (COMBO_ACTIVE(combo) && KEY_NOT_YET_RELEASED(COMBO_STATE(combo), key_index)) { /* first or middle key released */ key_is_part_of_combo = true; @@ -489,21 +495,21 @@ bool process_combo(uint16_t keycode, keyrecord_t *record) { if (record->event.pressed && is_combo_key) { #ifndef COMBO_NO_TIMER -# ifdef COMBO_STRICT_TIMER +# ifdef COMBO_STRICT_TIMER if (!timer) { // timer is set only on the first key timer = timer_read(); } -# else +# else timer = timer_read(); -# endif +# endif #endif if (key_buffer_size < COMBO_KEY_BUFFER_LENGTH) { key_buffer[key_buffer_size++] = (queued_record_t){ - .record = *record, - .keycode = keycode, - .combo_index = -1, // this will be set when applying combos + .record = *record, + .keycode = keycode, + .combo_index = -1, // this will be set when applying combos }; } } else { @@ -532,7 +538,7 @@ void combo_task(void) { if (combo_buffer_read != combo_buffer_write) { apply_combos(); longest_term = 0; - timer = 0; + timer = 0; } else { dump_key_buffer(); timer = 0; @@ -546,9 +552,9 @@ void combo_enable(void) { b_combo_enable = true; } void combo_disable(void) { #ifndef COMBO_NO_TIMER - timer = 0; + timer = 0; #endif - b_combo_enable = false; + b_combo_enable = false; combo_buffer_read = combo_buffer_write; clear_combos(); dump_key_buffer(); diff --git a/quantum/process_keycode/process_combo.h b/quantum/process_keycode/process_combo.h index 43c36d79e6..4c4e574e34 100644 --- a/quantum/process_keycode/process_combo.h +++ b/quantum/process_keycode/process_combo.h @@ -43,8 +43,8 @@ typedef struct { #ifdef EXTRA_SHORT_COMBOS uint8_t state; #else - bool disabled; - bool active; + bool disabled; + bool active; # if defined(EXTRA_EXTRA_LONG_COMBOS) uint32_t state; # elif defined(EXTRA_LONG_COMBOS) diff --git a/quantum/process_keycode/process_steno.c b/quantum/process_keycode/process_steno.c index a964aead35..5d0bb313b4 100644 --- a/quantum/process_keycode/process_steno.c +++ b/quantum/process_keycode/process_steno.c @@ -67,7 +67,7 @@ static const uint8_t boltmap[64] PROGMEM = {TXB_NUL, TXB_NUM, TXB_NUM, TXB_NUM, #ifdef STENO_COMBINEDMAP /* Used to look up when pressing the middle row key to combine two consonant or vowel keys */ -static const uint16_t combinedmap_first[] PROGMEM = {STN_S1, STN_TL, STN_PL, STN_HL, STN_FR, STN_PR, STN_LR, STN_TR, STN_DR, STN_A, STN_E}; +static const uint16_t combinedmap_first[] PROGMEM = {STN_S1, STN_TL, STN_PL, STN_HL, STN_FR, STN_PR, STN_LR, STN_TR, STN_DR, STN_A, STN_E}; static const uint16_t combinedmap_second[] PROGMEM = {STN_S2, STN_KL, STN_WL, STN_RL, STN_RR, STN_BR, STN_GR, STN_SR, STN_ZR, STN_O, STN_U}; #endif @@ -174,11 +174,10 @@ bool process_steno(uint16_t keycode, keyrecord_t *record) { return false; #ifdef STENO_COMBINEDMAP - case QK_STENO_COMB ... QK_STENO_COMB_MAX: - { + case QK_STENO_COMB ... QK_STENO_COMB_MAX: { uint8_t result; - result = process_steno(combinedmap_first[keycode-QK_STENO_COMB], record); - result &= process_steno(combinedmap_second[keycode-QK_STENO_COMB], record); + result = process_steno(combinedmap_first[keycode - QK_STENO_COMB], record); + result &= process_steno(combinedmap_second[keycode - QK_STENO_COMB], record); return result; } #endif diff --git a/quantum/quantum_keycodes.h b/quantum/quantum_keycodes.h index 2ea81dd4c8..373a31a00d 100644 --- a/quantum/quantum_keycodes.h +++ b/quantum/quantum_keycodes.h @@ -809,12 +809,12 @@ enum quantum_keycodes { #define CMD_T(kc) LCMD_T(kc) #define WIN_T(kc) LWIN_T(kc) -#define C_S_T(kc) MT(MOD_LCTL | MOD_LSFT, kc) // Left Control + Shift e.g. for gnome-terminal -#define MEH_T(kc) MT(MOD_LCTL | MOD_LSFT | MOD_LALT, kc) // Meh is a less hyper version of the Hyper key -- doesn't include GUI, so just Left Control + Shift + Alt -#define LCAG_T(kc) MT(MOD_LCTL | MOD_LALT | MOD_LGUI, kc) // Left Control + Alt + GUI -#define RCAG_T(kc) MT(MOD_RCTL | MOD_RALT | MOD_RGUI, kc) // Right Control + Alt + GUI +#define C_S_T(kc) MT(MOD_LCTL | MOD_LSFT, kc) // Left Control + Shift e.g. for gnome-terminal +#define MEH_T(kc) MT(MOD_LCTL | MOD_LSFT | MOD_LALT, kc) // Meh is a less hyper version of the Hyper key -- doesn't include GUI, so just Left Control + Shift + Alt +#define LCAG_T(kc) MT(MOD_LCTL | MOD_LALT | MOD_LGUI, kc) // Left Control + Alt + GUI +#define RCAG_T(kc) MT(MOD_RCTL | MOD_RALT | MOD_RGUI, kc) // Right Control + Alt + GUI #define HYPR_T(kc) MT(MOD_LCTL | MOD_LSFT | MOD_LALT | MOD_LGUI, kc) // see http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/ -#define LSG_T(kc) MT(MOD_LSFT | MOD_LGUI, kc) // Left Shift + GUI +#define LSG_T(kc) MT(MOD_LSFT | MOD_LGUI, kc) // Left Shift + GUI #define SGUI_T(kc) LSG_T(kc) #define SCMD_T(kc) LSG_T(kc) #define SWIN_T(kc) LSG_T(kc) @@ -845,7 +845,7 @@ enum quantum_keycodes { #define UC_M_MA UNICODE_MODE_MAC #define UNICODE_MODE_OSX UNICODE_MODE_MAC // Deprecated alias -#define UC_M_OS UNICODE_MODE_MAC // Deprecated alias +#define UC_M_OS UNICODE_MODE_MAC // Deprecated alias #define UC_M_LN UNICODE_MODE_LNX #define UC_M_WI UNICODE_MODE_WIN #define UC_M_BS UNICODE_MODE_BSD diff --git a/quantum/rgb_matrix/animations/fractal_anim.h b/quantum/rgb_matrix/animations/fractal_anim.h index 99693165d7..83a69daa60 100644 --- a/quantum/rgb_matrix/animations/fractal_anim.h +++ b/quantum/rgb_matrix/animations/fractal_anim.h @@ -18,44 +18,57 @@ #ifdef ENABLE_RGB_MATRIX_FRACTAL RGB_MATRIX_EFFECT(FRACTAL) -# ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS +# ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS static bool FRACTAL(effect_params_t* params) { - #define MID_COL MATRIX_COLS / 2 +# define MID_COL MATRIX_COLS / 2 static bool led[MATRIX_ROWS][MATRIX_COLS]; static uint32_t wait_timer = 0; - if (wait_timer > g_rgb_timer) { return false; } + if (wait_timer > g_rgb_timer) { + return false; + } inline uint32_t interval(void) { return 3000 / scale16by8(qadd8(rgb_matrix_config.speed, 16), 16); } RGB rgb = rgb_matrix_hsv_to_rgb(rgb_matrix_config.hsv); for (uint8_t h = 0; h < MATRIX_ROWS; ++h) { - - for (uint8_t l = 0; l < MID_COL-1; ++l) { // Light and move left columns outwards - if (led[h][l]) { rgb_matrix_set_color(g_led_config.matrix_co[h][l], rgb.r, rgb.g, rgb.b); } - else { rgb_matrix_set_color(g_led_config.matrix_co[h][l], 0, 0, 0); } - led[h][l] = led[h][l+1]; + for (uint8_t l = 0; l < MID_COL - 1; ++l) { // Light and move left columns outwards + if (led[h][l]) { + rgb_matrix_set_color(g_led_config.matrix_co[h][l], rgb.r, rgb.g, rgb.b); + } else { + rgb_matrix_set_color(g_led_config.matrix_co[h][l], 0, 0, 0); + } + led[h][l] = led[h][l + 1]; } - for (uint8_t r = MATRIX_COLS-1; r > MID_COL; --r) { // Light and move right columns outwards - if (led[h][r]) { rgb_matrix_set_color(g_led_config.matrix_co[h][r], rgb.r, rgb.g, rgb.b); } - else { rgb_matrix_set_color(g_led_config.matrix_co[h][r], 0, 0, 0); } - led[h][r] = led[h][r-1]; + for (uint8_t r = MATRIX_COLS - 1; r > MID_COL; --r) { // Light and move right columns outwards + if (led[h][r]) { + rgb_matrix_set_color(g_led_config.matrix_co[h][r], rgb.r, rgb.g, rgb.b); + } else { + rgb_matrix_set_color(g_led_config.matrix_co[h][r], 0, 0, 0); + } + led[h][r] = led[h][r - 1]; } // Light both middle columns - if (led[h][MID_COL]) { rgb_matrix_set_color(g_led_config.matrix_co[h][MID_COL], rgb.r, rgb.g, rgb.b); } - else { rgb_matrix_set_color(g_led_config.matrix_co[h][MID_COL], 0, 0, 0); } - if (led[h][MID_COL-1]) { rgb_matrix_set_color(g_led_config.matrix_co[h][MID_COL-1], rgb.r, rgb.g, rgb.b); } - else { rgb_matrix_set_color(g_led_config.matrix_co[h][MID_COL-1], 0, 0, 0); } + if (led[h][MID_COL]) { + rgb_matrix_set_color(g_led_config.matrix_co[h][MID_COL], rgb.r, rgb.g, rgb.b); + } else { + rgb_matrix_set_color(g_led_config.matrix_co[h][MID_COL], 0, 0, 0); + } + if (led[h][MID_COL - 1]) { + rgb_matrix_set_color(g_led_config.matrix_co[h][MID_COL - 1], rgb.r, rgb.g, rgb.b); + } else { + rgb_matrix_set_color(g_led_config.matrix_co[h][MID_COL - 1], 0, 0, 0); + } // Generate new random fractal columns - led[h][MID_COL] = led[h][MID_COL-1] = (random8() & 3) ? false : true; + led[h][MID_COL] = led[h][MID_COL - 1] = (random8() & 3) ? false : true; } wait_timer = g_rgb_timer + interval(); return false; } -# endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS -#endif // ENABLE_RGB_MATRIX_FRACTAL +# endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS +#endif // ENABLE_RGB_MATRIX_FRACTAL diff --git a/quantum/split_common/transactions.c b/quantum/split_common/transactions.c index fd676f0729..3ff87710e7 100644 --- a/quantum/split_common/transactions.c +++ b/quantum/split_common/transactions.c @@ -42,8 +42,8 @@ { &dummy, 0, 0, sizeof_member(split_shared_memory_t, member), offsetof(split_shared_memory_t, member), cb } #define trans_target2initiator_initializer(member) trans_target2initiator_initializer_cb(member, NULL) -#define transport_write(id, data, length) transport_execute_transaction(id, data, length, NULL, 0) -#define transport_read(id, data, length) transport_execute_transaction(id, NULL, 0, data, length) +#define transport_write(id, data, length) transport_execute_transaction(id, data, length, NULL, 0) +#define transport_read(id, data, length) transport_execute_transaction(id, NULL, 0, data, length) #if defined(SPLIT_TRANSACTION_IDS_KB) || defined(SPLIT_TRANSACTION_IDS_USER) // Forward-declare the RPC callback handlers @@ -157,8 +157,8 @@ static void master_matrix_handlers_slave(matrix_row_t master_matrix[], matrix_ro memcpy(master_matrix, split_shmem->mmatrix.matrix, sizeof(split_shmem->mmatrix.matrix)); } -# define TRANSACTIONS_MASTER_MATRIX_MASTER() TRANSACTION_HANDLER_MASTER(master_matrix) -# define TRANSACTIONS_MASTER_MATRIX_SLAVE() TRANSACTION_HANDLER_SLAVE(master_matrix) +# define TRANSACTIONS_MASTER_MATRIX_MASTER() TRANSACTION_HANDLER_MASTER(master_matrix) +# define TRANSACTIONS_MASTER_MATRIX_SLAVE() TRANSACTION_HANDLER_SLAVE(master_matrix) # define TRANSACTIONS_MASTER_MATRIX_REGISTRATIONS [PUT_MASTER_MATRIX] = trans_initiator2target_initializer(mmatrix.matrix), #else // SPLIT_TRANSPORT_MIRROR @@ -235,8 +235,8 @@ static void sync_timer_handlers_slave(matrix_row_t master_matrix[], matrix_row_t } } -# define TRANSACTIONS_SYNC_TIMER_MASTER() TRANSACTION_HANDLER_MASTER(sync_timer) -# define TRANSACTIONS_SYNC_TIMER_SLAVE() TRANSACTION_HANDLER_SLAVE(sync_timer) +# define TRANSACTIONS_SYNC_TIMER_MASTER() TRANSACTION_HANDLER_MASTER(sync_timer) +# define TRANSACTIONS_SYNC_TIMER_SLAVE() TRANSACTION_HANDLER_SLAVE(sync_timer) # define TRANSACTIONS_SYNC_TIMER_REGISTRATIONS [PUT_SYNC_TIMER] = trans_initiator2target_initializer(sync_timer), #else // DISABLE_SYNC_TIMER @@ -300,8 +300,8 @@ static void led_state_handlers_slave(matrix_row_t master_matrix[], matrix_row_t set_split_host_keyboard_leds(split_shmem->led_state); } -# define TRANSACTIONS_LED_STATE_MASTER() TRANSACTION_HANDLER_MASTER(led_state) -# define TRANSACTIONS_LED_STATE_SLAVE() TRANSACTION_HANDLER_SLAVE(led_state) +# define TRANSACTIONS_LED_STATE_MASTER() TRANSACTION_HANDLER_MASTER(led_state) +# define TRANSACTIONS_LED_STATE_SLAVE() TRANSACTION_HANDLER_SLAVE(led_state) # define TRANSACTIONS_LED_STATE_REGISTRATIONS [PUT_LED_STATE] = trans_initiator2target_initializer(led_state), #else // SPLIT_LED_STATE_ENABLE @@ -357,8 +357,8 @@ static void mods_handlers_slave(matrix_row_t master_matrix[], matrix_row_t slave # endif } -# define TRANSACTIONS_MODS_MASTER() TRANSACTION_HANDLER_MASTER(mods) -# define TRANSACTIONS_MODS_SLAVE() TRANSACTION_HANDLER_SLAVE(mods) +# define TRANSACTIONS_MODS_MASTER() TRANSACTION_HANDLER_MASTER(mods) +# define TRANSACTIONS_MODS_SLAVE() TRANSACTION_HANDLER_SLAVE(mods) # define TRANSACTIONS_MODS_REGISTRATIONS [PUT_MODS] = trans_initiator2target_initializer(mods), #else // SPLIT_MODS_ENABLE @@ -382,8 +382,8 @@ static bool backlight_handlers_master(matrix_row_t master_matrix[], matrix_row_t static void backlight_handlers_slave(matrix_row_t master_matrix[], matrix_row_t slave_matrix[]) { backlight_set(split_shmem->backlight_level); } -# define TRANSACTIONS_BACKLIGHT_MASTER() TRANSACTION_HANDLER_MASTER(backlight) -# define TRANSACTIONS_BACKLIGHT_SLAVE() TRANSACTION_HANDLER_SLAVE(backlight) +# define TRANSACTIONS_BACKLIGHT_MASTER() TRANSACTION_HANDLER_MASTER(backlight) +# define TRANSACTIONS_BACKLIGHT_SLAVE() TRANSACTION_HANDLER_SLAVE(backlight) # define TRANSACTIONS_BACKLIGHT_REGISTRATIONS [PUT_BACKLIGHT] = trans_initiator2target_initializer(backlight_level), #else // BACKLIGHT_ENABLE @@ -419,8 +419,8 @@ static void rgblight_handlers_slave(matrix_row_t master_matrix[], matrix_row_t s } } -# define TRANSACTIONS_RGBLIGHT_MASTER() TRANSACTION_HANDLER_MASTER(rgblight) -# define TRANSACTIONS_RGBLIGHT_SLAVE() TRANSACTION_HANDLER_SLAVE(rgblight) +# define TRANSACTIONS_RGBLIGHT_MASTER() TRANSACTION_HANDLER_MASTER(rgblight) +# define TRANSACTIONS_RGBLIGHT_SLAVE() TRANSACTION_HANDLER_SLAVE(rgblight) # define TRANSACTIONS_RGBLIGHT_REGISTRATIONS [PUT_RGBLIGHT] = trans_initiator2target_initializer(rgblight_sync), #else // defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT) @@ -449,8 +449,8 @@ static void led_matrix_handlers_slave(matrix_row_t master_matrix[], matrix_row_t led_matrix_set_suspend_state(split_shmem->led_matrix_sync.led_suspend_state); } -# define TRANSACTIONS_LED_MATRIX_MASTER() TRANSACTION_HANDLER_MASTER(led_matrix) -# define TRANSACTIONS_LED_MATRIX_SLAVE() TRANSACTION_HANDLER_SLAVE(led_matrix) +# define TRANSACTIONS_LED_MATRIX_MASTER() TRANSACTION_HANDLER_MASTER(led_matrix) +# define TRANSACTIONS_LED_MATRIX_SLAVE() TRANSACTION_HANDLER_SLAVE(led_matrix) # define TRANSACTIONS_LED_MATRIX_REGISTRATIONS [PUT_LED_MATRIX] = trans_initiator2target_initializer(led_matrix_sync), #else // defined(LED_MATRIX_ENABLE) && defined(LED_MATRIX_SPLIT) @@ -479,8 +479,8 @@ static void rgb_matrix_handlers_slave(matrix_row_t master_matrix[], matrix_row_t rgb_matrix_set_suspend_state(split_shmem->rgb_matrix_sync.rgb_suspend_state); } -# define TRANSACTIONS_RGB_MATRIX_MASTER() TRANSACTION_HANDLER_MASTER(rgb_matrix) -# define TRANSACTIONS_RGB_MATRIX_SLAVE() TRANSACTION_HANDLER_SLAVE(rgb_matrix) +# define TRANSACTIONS_RGB_MATRIX_MASTER() TRANSACTION_HANDLER_MASTER(rgb_matrix) +# define TRANSACTIONS_RGB_MATRIX_SLAVE() TRANSACTION_HANDLER_SLAVE(rgb_matrix) # define TRANSACTIONS_RGB_MATRIX_REGISTRATIONS [PUT_RGB_MATRIX] = trans_initiator2target_initializer(rgb_matrix_sync), #else // defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_SPLIT) @@ -504,8 +504,8 @@ static bool wpm_handlers_master(matrix_row_t master_matrix[], matrix_row_t slave static void wpm_handlers_slave(matrix_row_t master_matrix[], matrix_row_t slave_matrix[]) { set_current_wpm(split_shmem->current_wpm); } -# define TRANSACTIONS_WPM_MASTER() TRANSACTION_HANDLER_MASTER(wpm) -# define TRANSACTIONS_WPM_SLAVE() TRANSACTION_HANDLER_SLAVE(wpm) +# define TRANSACTIONS_WPM_MASTER() TRANSACTION_HANDLER_MASTER(wpm) +# define TRANSACTIONS_WPM_SLAVE() TRANSACTION_HANDLER_SLAVE(wpm) # define TRANSACTIONS_WPM_REGISTRATIONS [PUT_WPM] = trans_initiator2target_initializer(current_wpm), #else // defined(WPM_ENABLE) && defined(SPLIT_WPM_ENABLE) @@ -535,8 +535,8 @@ static void oled_handlers_slave(matrix_row_t master_matrix[], matrix_row_t slave } } -# define TRANSACTIONS_OLED_MASTER() TRANSACTION_HANDLER_MASTER(oled) -# define TRANSACTIONS_OLED_SLAVE() TRANSACTION_HANDLER_SLAVE(oled) +# define TRANSACTIONS_OLED_MASTER() TRANSACTION_HANDLER_MASTER(oled) +# define TRANSACTIONS_OLED_SLAVE() TRANSACTION_HANDLER_SLAVE(oled) # define TRANSACTIONS_OLED_REGISTRATIONS [PUT_OLED] = trans_initiator2target_initializer(current_oled_state), #else // defined(OLED_ENABLE) && defined(SPLIT_OLED_ENABLE) @@ -566,8 +566,8 @@ static void st7565_handlers_slave(matrix_row_t master_matrix[], matrix_row_t sla } } -# define TRANSACTIONS_ST7565_MASTER() TRANSACTION_HANDLER_MASTER(st7565) -# define TRANSACTIONS_ST7565_SLAVE() TRANSACTION_HANDLER_SLAVE(st7565) +# define TRANSACTIONS_ST7565_MASTER() TRANSACTION_HANDLER_MASTER(st7565) +# define TRANSACTIONS_ST7565_SLAVE() TRANSACTION_HANDLER_SLAVE(st7565) # define TRANSACTIONS_ST7565_REGISTRATIONS [PUT_ST7565] = trans_initiator2target_initializer(current_st7565_state), #else // defined(ST7565_ENABLE) && defined(SPLIT_ST7565_ENABLE) diff --git a/tmk_core/common/chibios/sleep_led.c b/tmk_core/common/chibios/sleep_led.c index 1c65016a42..477056a454 100644 --- a/tmk_core/common/chibios/sleep_led.c +++ b/tmk_core/common/chibios/sleep_led.c @@ -65,7 +65,7 @@ void sleep_led_timer_callback(void) { /* LPTMR clock options */ # define LPTMR_CLOCK_MCGIRCLK 0 /* 4MHz clock */ -# define LPTMR_CLOCK_LPO 1 /* 1kHz clock */ +# define LPTMR_CLOCK_LPO 1 /* 1kHz clock */ # define LPTMR_CLOCK_ERCLK32K 2 /* external 32kHz crystal */ # define LPTMR_CLOCK_OSCERCLK 3 /* output from OSC */ @@ -121,7 +121,7 @@ void sleep_led_init(void) { MCG->C2 |= MCG_C2_IRCS; // fast (4MHz) internal ref clock # if defined(KL27) // divide the 8MHz IRC by 2, to have the same MCGIRCLK speed as others MCG->MC |= MCG_MC_LIRC_DIV2_DIV2; -# endif /* KL27 */ +# endif /* KL27 */ MCG->C1 |= MCG_C1_IRCLKEN; // enable internal ref clock // to work in stop mode, also MCG_C1_IREFSTEN // Divide 4MHz by 2^N (N=6) => 62500 irqs/sec => From 7f8faa429e0c0662cec34a7d60e33ca58333d6d7 Mon Sep 17 00:00:00 2001 From: Michael Stapelberg Date: Mon, 1 Nov 2021 22:52:34 +0100 Subject: [PATCH 384/595] core: make the full 4096 bytes of EEPROM work on Teensy 3.6 (#12947) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This commit updates QMK’s copy of the the teensy3 Arduino core code with the necessary changes to make the Teensy 3.6 work. Aside from different values for the partitioning, HSRUN mode must be left temporarily while using the EEPROM. fixes https://github.com/kinx-project/kint/issues/8 related to https://github.com/kinx-project/kint/issues/10 --- tmk_core/common/chibios/eeprom_teensy.c | 213 ++++++++++++++++++++++-- 1 file changed, 199 insertions(+), 14 deletions(-) diff --git a/tmk_core/common/chibios/eeprom_teensy.c b/tmk_core/common/chibios/eeprom_teensy.c index 4aaf665269..2493c607d8 100644 --- a/tmk_core/common/chibios/eeprom_teensy.c +++ b/tmk_core/common/chibios/eeprom_teensy.c @@ -39,7 +39,126 @@ * SOFTWARE. */ -#if defined(K20x) /* chip selection */ +#define SMC_PMSTAT_RUN ((uint8_t)0x01) +#define SMC_PMSTAT_HSRUN ((uint8_t)0x80) + +#define F_CPU KINETIS_SYSCLK_FREQUENCY + +static int kinetis_hsrun_disable(void) { +#if defined(MK66F18) + if (SMC->PMSTAT == SMC_PMSTAT_HSRUN) { +// First, reduce the CPU clock speed, but do not change +// the peripheral speed (F_BUS). Serial1 & Serial2 baud +// rates will be impacted, but most other peripherals +// will continue functioning at the same speed. +# if F_CPU == 256000000 && F_BUS == 64000000 + SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(1, 3, 1, 7); // TODO: TEST +# elif F_CPU == 256000000 && F_BUS == 128000000 + SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(1, 1, 1, 7); // TODO: TEST +# elif F_CPU == 240000000 && F_BUS == 60000000 + SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(1, 3, 1, 7); // ok +# elif F_CPU == 240000000 && F_BUS == 80000000 + SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(2, 2, 2, 8); // ok +# elif F_CPU == 240000000 && F_BUS == 120000000 + SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(1, 1, 1, 7); // ok +# elif F_CPU == 216000000 && F_BUS == 54000000 + SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(1, 3, 1, 7); // ok +# elif F_CPU == 216000000 && F_BUS == 72000000 + SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(2, 2, 2, 8); // ok +# elif F_CPU == 216000000 && F_BUS == 108000000 + SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(1, 1, 1, 7); // ok +# elif F_CPU == 192000000 && F_BUS == 48000000 + SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(1, 3, 1, 7); // ok +# elif F_CPU == 192000000 && F_BUS == 64000000 + SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(2, 2, 2, 8); // ok +# elif F_CPU == 192000000 && F_BUS == 96000000 + SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(1, 1, 1, 7); // ok +# elif F_CPU == 180000000 && F_BUS == 60000000 + SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(2, 2, 2, 8); // ok +# elif F_CPU == 180000000 && F_BUS == 90000000 + SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(1, 1, 1, 7); // ok +# elif F_CPU == 168000000 && F_BUS == 56000000 + SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(2, 2, 2, 5); // ok +# elif F_CPU == 144000000 && F_BUS == 48000000 + SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(2, 2, 2, 5); // ok +# elif F_CPU == 144000000 && F_BUS == 72000000 + SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(1, 1, 1, 5); // ok +# elif F_CPU == 120000000 && F_BUS == 60000000 + SIM->CLKDIV1 = SIM_CLKDIV1_OUTDIV1(KINETIS_CLKDIV1_OUTDIV1 - 1) | SIM_CLKDIV1_OUTDIV2(KINETIS_CLKDIV1_OUTDIV2 - 1) | +# if defined(MK66F18) + SIM_CLKDIV1_OUTDIV3(KINETIS_CLKDIV1_OUTDIV3 - 1) | +# endif + SIM_CLKDIV1_OUTDIV4(KINETIS_CLKDIV1_OUTDIV4 - 1); +# else + return 0; +# endif + // Then turn off HSRUN mode + SMC->PMCTRL = SMC_PMCTRL_RUNM_SET(0); + while (SMC->PMSTAT == SMC_PMSTAT_HSRUN) + ; // wait + return 1; + } +#endif + return 0; +} + +static int kinetis_hsrun_enable(void) { +#if defined(MK66F18) + if (SMC->PMSTAT == SMC_PMSTAT_RUN) { + // Turn HSRUN mode on + SMC->PMCTRL = SMC_PMCTRL_RUNM_SET(3); + while (SMC->PMSTAT != SMC_PMSTAT_HSRUN) { + ; + } // wait +// Then configure clock for full speed +# if F_CPU == 256000000 && F_BUS == 64000000 + SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(0, 3, 0, 7); +# elif F_CPU == 256000000 && F_BUS == 128000000 + SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(0, 1, 0, 7); +# elif F_CPU == 240000000 && F_BUS == 60000000 + SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(0, 3, 0, 7); +# elif F_CPU == 240000000 && F_BUS == 80000000 + SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(0, 2, 0, 7); +# elif F_CPU == 240000000 && F_BUS == 120000000 + SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(0, 1, 0, 7); +# elif F_CPU == 216000000 && F_BUS == 54000000 + SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(0, 3, 0, 7); +# elif F_CPU == 216000000 && F_BUS == 72000000 + SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(0, 2, 0, 7); +# elif F_CPU == 216000000 && F_BUS == 108000000 + SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(0, 1, 0, 7); +# elif F_CPU == 192000000 && F_BUS == 48000000 + SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(0, 3, 0, 6); +# elif F_CPU == 192000000 && F_BUS == 64000000 + SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(0, 2, 0, 6); +# elif F_CPU == 192000000 && F_BUS == 96000000 + SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(0, 1, 0, 6); +# elif F_CPU == 180000000 && F_BUS == 60000000 + SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(0, 2, 0, 6); +# elif F_CPU == 180000000 && F_BUS == 90000000 + SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(0, 1, 0, 6); +# elif F_CPU == 168000000 && F_BUS == 56000000 + SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(0, 2, 0, 5); +# elif F_CPU == 144000000 && F_BUS == 48000000 + SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(0, 2, 0, 4); +# elif F_CPU == 144000000 && F_BUS == 72000000 + SIM_CLKDIV1 = SIM_CLKDIV1_OUTDIVS(0, 1, 0, 4); +# elif F_CPU == 120000000 && F_BUS == 60000000 + SIM->CLKDIV1 = SIM_CLKDIV1_OUTDIV1(KINETIS_CLKDIV1_OUTDIV1 - 1) | SIM_CLKDIV1_OUTDIV2(KINETIS_CLKDIV1_OUTDIV2 - 1) | +# if defined(MK66F18) + SIM_CLKDIV1_OUTDIV3(KINETIS_CLKDIV1_OUTDIV3 - 1) | +# endif + SIM_CLKDIV1_OUTDIV4(KINETIS_CLKDIV1_OUTDIV4 - 1); +# else + return 0; +# endif + return 1; + } +#endif + return 0; +} + +#if defined(K20x) || defined(MK66F18) /* chip selection */ /* Teensy 3.0, 3.1, 3.2; mchck; infinity keyboard */ // The EEPROM is really RAM with a hardware-based backup system to @@ -69,22 +188,34 @@ // # define HANDLE_UNALIGNED_WRITES +# if defined(K20x) +# define EEPROM_MAX 2048 +# define EEPARTITION 0x03 // all 32K dataflash for EEPROM, none for Data +# define EEESPLIT 0x30 // must be 0x30 on these chips +# elif defined(MK66F18) +# define EEPROM_MAX 4096 +# define EEPARTITION 0x05 // 128K dataflash for EEPROM, 128K for Data +# define EEESPLIT 0x10 // best endurance: 0x00 = first 12%, 0x10 = first 25%, 0x30 = all equal +# endif + // Minimum EEPROM Endurance // ------------------------ -# if (EEPROM_SIZE == 2048) // 35000 writes/byte or 70000 writes/word -# define EEESIZE 0x33 +# if (EEPROM_SIZE == 4096) +# define EEESIZE 0x02 +# elif (EEPROM_SIZE == 2048) // 35000 writes/byte or 70000 writes/word +# define EEESIZE 0x03 # elif (EEPROM_SIZE == 1024) // 75000 writes/byte or 150000 writes/word -# define EEESIZE 0x34 +# define EEESIZE 0x04 # elif (EEPROM_SIZE == 512) // 155000 writes/byte or 310000 writes/word -# define EEESIZE 0x35 +# define EEESIZE 0x05 # elif (EEPROM_SIZE == 256) // 315000 writes/byte or 630000 writes/word -# define EEESIZE 0x36 +# define EEESIZE 0x06 # elif (EEPROM_SIZE == 128) // 635000 writes/byte or 1270000 writes/word -# define EEESIZE 0x37 +# define EEESIZE 0x07 # elif (EEPROM_SIZE == 64) // 1275000 writes/byte or 2550000 writes/word -# define EEESIZE 0x38 +# define EEESIZE 0x08 # elif (EEPROM_SIZE == 32) // 2555000 writes/byte or 5110000 writes/word -# define EEESIZE 0x39 +# define EEESIZE 0x09 # endif /** \brief eeprom initialization @@ -97,15 +228,21 @@ void eeprom_initialize(void) { uint8_t status; if (FTFL->FCNFG & FTFL_FCNFG_RAMRDY) { + uint8_t stat = FTFL->FSTAT & 0x70; + if (stat) FTFL->FSTAT = stat; + // FlexRAM is configured as traditional RAM // We need to reconfigure for EEPROM usage - FTFL->FCCOB0 = 0x80; // PGMPART = Program Partition Command - FTFL->FCCOB4 = EEESIZE; // EEPROM Size - FTFL->FCCOB5 = 0x03; // 0K for Dataflash, 32K for EEPROM backup + kinetis_hsrun_disable(); + FTFL->FCCOB0 = FTFE_FCCOB0_CCOBn_SET(0x80); // PGMPART = Program Partition Command + FTFL->FCCOB3 = 0; + FTFL->FCCOB4 = EEESPLIT | EEESIZE; + FTFL->FCCOB5 = EEPARTITION; __disable_irq(); // do_flash_cmd() must execute from RAM. Luckily the C syntax is simple... (*((void (*)(volatile uint8_t *))((uint32_t)do_flash_cmd | 1)))(&(FTFL->FSTAT)); __enable_irq(); + kinetis_hsrun_enable(); status = FTFL->FSTAT; if (status & (FTFL_FSTAT_RDCOLERR | FTFL_FSTAT_ACCERR | FTFL_FSTAT_FPVIOL)) { FTFL->FSTAT = (status & (FTFL_FSTAT_RDCOLERR | FTFL_FSTAT_ACCERR | FTFL_FSTAT_FPVIOL)); @@ -114,11 +251,11 @@ void eeprom_initialize(void) { } // wait for eeprom to become ready (is this really necessary?) while (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) { - if (++count > 20000) break; + if (++count > 200000) break; } } -# define FlexRAM ((uint8_t *)0x14000000) +# define FlexRAM ((volatile uint8_t *)0x14000000) /** \brief eeprom read byte * @@ -195,8 +332,12 @@ void eeprom_write_byte(uint8_t *addr, uint8_t value) { if (offset >= EEPROM_SIZE) return; if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize(); if (FlexRAM[offset] != value) { + kinetis_hsrun_disable(); + uint8_t stat = FTFL->FSTAT & 0x70; + if (stat) FTFL->FSTAT = stat; FlexRAM[offset] = value; flexram_wait(); + kinetis_hsrun_enable(); } } @@ -213,18 +354,30 @@ void eeprom_write_word(uint16_t *addr, uint16_t value) { if ((offset & 1) == 0) { # endif if (*(uint16_t *)(&FlexRAM[offset]) != value) { + kinetis_hsrun_disable(); + uint8_t stat = FTFL->FSTAT & 0x70; + if (stat) FTFL->FSTAT = stat; *(uint16_t *)(&FlexRAM[offset]) = value; flexram_wait(); + kinetis_hsrun_enable(); } # ifdef HANDLE_UNALIGNED_WRITES } else { if (FlexRAM[offset] != value) { + kinetis_hsrun_disable(); + uint8_t stat = FTFL->FSTAT & 0x70; + if (stat) FTFL->FSTAT = stat; FlexRAM[offset] = value; flexram_wait(); + kinetis_hsrun_enable(); } if (FlexRAM[offset + 1] != (value >> 8)) { + kinetis_hsrun_disable(); + uint8_t stat = FTFL->FSTAT & 0x70; + if (stat) FTFL->FSTAT = stat; FlexRAM[offset + 1] = value >> 8; flexram_wait(); + kinetis_hsrun_enable(); } } # endif @@ -244,33 +397,57 @@ void eeprom_write_dword(uint32_t *addr, uint32_t value) { case 0: # endif if (*(uint32_t *)(&FlexRAM[offset]) != value) { + kinetis_hsrun_disable(); + uint8_t stat = FTFL->FSTAT & 0x70; + if (stat) FTFL->FSTAT = stat; *(uint32_t *)(&FlexRAM[offset]) = value; flexram_wait(); + kinetis_hsrun_enable(); } return; # ifdef HANDLE_UNALIGNED_WRITES case 2: if (*(uint16_t *)(&FlexRAM[offset]) != value) { + kinetis_hsrun_disable(); + uint8_t stat = FTFL->FSTAT & 0x70; + if (stat) FTFL->FSTAT = stat; *(uint16_t *)(&FlexRAM[offset]) = value; flexram_wait(); + kinetis_hsrun_enable(); } if (*(uint16_t *)(&FlexRAM[offset + 2]) != (value >> 16)) { + kinetis_hsrun_disable(); + uint8_t stat = FTFL->FSTAT & 0x70; + if (stat) FTFL->FSTAT = stat; *(uint16_t *)(&FlexRAM[offset + 2]) = value >> 16; flexram_wait(); + kinetis_hsrun_enable(); } return; default: if (FlexRAM[offset] != value) { + kinetis_hsrun_disable(); + uint8_t stat = FTFL->FSTAT & 0x70; + if (stat) FTFL->FSTAT = stat; FlexRAM[offset] = value; flexram_wait(); + kinetis_hsrun_enable(); } if (*(uint16_t *)(&FlexRAM[offset + 1]) != (value >> 8)) { + kinetis_hsrun_disable(); + uint8_t stat = FTFL->FSTAT & 0x70; + if (stat) FTFL->FSTAT = stat; *(uint16_t *)(&FlexRAM[offset + 1]) = value >> 8; flexram_wait(); + kinetis_hsrun_enable(); } if (FlexRAM[offset + 3] != (value >> 24)) { + kinetis_hsrun_disable(); + uint8_t stat = FTFL->FSTAT & 0x70; + if (stat) FTFL->FSTAT = stat; FlexRAM[offset + 3] = value >> 24; flexram_wait(); + kinetis_hsrun_enable(); } } # endif @@ -288,6 +465,7 @@ void eeprom_write_block(const void *buf, void *addr, uint32_t len) { if (!(FTFL->FCNFG & FTFL_FCNFG_EEERDY)) eeprom_initialize(); if (len >= EEPROM_SIZE) len = EEPROM_SIZE; if (offset + len >= EEPROM_SIZE) len = EEPROM_SIZE - offset; + kinetis_hsrun_disable(); while (len > 0) { uint32_t lsb = offset & 3; if (lsb == 0 && len >= 4) { @@ -298,6 +476,8 @@ void eeprom_write_block(const void *buf, void *addr, uint32_t len) { val32 |= (*src++ << 16); val32 |= (*src++ << 24); if (*(uint32_t *)(&FlexRAM[offset]) != val32) { + uint8_t stat = FTFL->FSTAT & 0x70; + if (stat) FTFL->FSTAT = stat; *(uint32_t *)(&FlexRAM[offset]) = val32; flexram_wait(); } @@ -309,6 +489,8 @@ void eeprom_write_block(const void *buf, void *addr, uint32_t len) { val16 = *src++; val16 |= (*src++ << 8); if (*(uint16_t *)(&FlexRAM[offset]) != val16) { + uint8_t stat = FTFL->FSTAT & 0x70; + if (stat) FTFL->FSTAT = stat; *(uint16_t *)(&FlexRAM[offset]) = val16; flexram_wait(); } @@ -318,6 +500,8 @@ void eeprom_write_block(const void *buf, void *addr, uint32_t len) { // write 8 bits uint8_t val8 = *src++; if (FlexRAM[offset] != val8) { + uint8_t stat = FTFL->FSTAT & 0x70; + if (stat) FTFL->FSTAT = stat; FlexRAM[offset] = val8; flexram_wait(); } @@ -325,6 +509,7 @@ void eeprom_write_block(const void *buf, void *addr, uint32_t len) { len--; } } + kinetis_hsrun_enable(); } /* From a29ca1e7f1a5addfde163b158399684505453fc9 Mon Sep 17 00:00:00 2001 From: Vlad K Date: Mon, 1 Nov 2021 15:04:37 -0700 Subject: [PATCH 385/595] Add support for ISSI drivers on both sides of a split keyboard (#13842) * Gets RGB working on a split keyboard with IS31FL3733. Currently needs small tweak to re-enable WS2812 * Added helper function * Trying to integrate the function * Moved functionality into a macro * Swapped conditional for a macro everywhere * Tidying up * More code cleanup * Documentation updates * Fixed formatting via linter * Switching to a function from a macro * Fixed compile error * Fixing WS2812 behavior. UNTESTED. * Updated documentation about the driver addresses. * Fixed code for WS2812 * Trying to add in LED_MATRIX support * Updated effects for LED matrix * Updated third-party effect defines. * Ran format-c on modified files * Apply suggestions from code review Co-authored-by: Ryan * Move to static inline. Avoids issues with gcc v8+ * Move helper function for LED_matrix to static inline to avoid issues with gcc v8+ Co-authored-by: Vlad Kvitnevskiy Co-authored-by: Ryan --- docs/feature_led_matrix.md | 7 +-- docs/feature_rgb_matrix.md | 7 +-- keyboards/bandominedoni/rgb_matrix_user.inc | 6 +-- .../percent/canoe_gen2/rgb_matrix_kb.inc | 10 ++--- keyboards/yushakobo/quick17/rgb_matrix_kb.inc | 2 +- .../led_matrix/animations/alpha_mods_anim.h | 2 +- .../led_matrix/animations/breathing_anim.h | 2 +- .../animations/runners/effect_runner_dx_dy.h | 2 +- .../runners/effect_runner_dx_dy_dist.h | 2 +- .../animations/runners/effect_runner_i.h | 2 +- .../runners/effect_runner_reactive.h | 2 +- .../runners/effect_runner_reactive_splash.h | 2 +- .../runners/effect_runner_sin_cos_i.h | 2 +- quantum/led_matrix/animations/solid_anim.h | 2 +- quantum/led_matrix/led_matrix.c | 14 +----- quantum/led_matrix/led_matrix.h | 45 ++++++++++++++++--- .../rgb_matrix/animations/alpha_mods_anim.h | 2 +- .../rgb_matrix/animations/breathing_anim.h | 2 +- .../animations/gradient_left_right_anim.h | 2 +- .../animations/gradient_up_down_anim.h | 2 +- .../animations/hue_breathing_anim.h | 2 +- .../animations/jellybean_raindrops_anim.h | 2 +- .../rgb_matrix/animations/raindrops_anim.h | 2 +- .../animations/runners/effect_runner_dx_dy.h | 2 +- .../runners/effect_runner_dx_dy_dist.h | 2 +- .../animations/runners/effect_runner_i.h | 2 +- .../runners/effect_runner_reactive.h | 2 +- .../runners/effect_runner_reactive_splash.h | 2 +- .../runners/effect_runner_sin_cos_i.h | 2 +- .../rgb_matrix/animations/solid_color_anim.h | 2 +- quantum/rgb_matrix/rgb_matrix.c | 9 +--- quantum/rgb_matrix/rgb_matrix.h | 45 ++++++++++++++++--- quantum/rgb_matrix/rgb_matrix_drivers.c | 8 ++++ 33 files changed, 127 insertions(+), 72 deletions(-) diff --git a/docs/feature_led_matrix.md b/docs/feature_led_matrix.md index ed92bffd99..d4b20b9aa2 100644 --- a/docs/feature_led_matrix.md +++ b/docs/feature_led_matrix.md @@ -49,6 +49,8 @@ Here is an example using 2 drivers. !> Note the parentheses, this is so when `LED_DRIVER_LED_TOTAL` is used in code and expanded, the values are added together before any additional math is applied to them. As an example, `rand() % (LED_DRIVER_1_LED_TOTAL + LED_DRIVER_2_LED_TOTAL)` will give very different results than `rand() % LED_DRIVER_1_LED_TOTAL + LED_DRIVER_2_LED_TOTAL`. +For split keyboards using `LED_MATRIX_SPLIT` with an LED driver, you can either have the same driver address or different driver addresses. If using different addresses, use `DRIVER_ADDR_1` for one and `DRIVER_ADDR_2` for the other one. Then, in `g_is31_leds`, fill out the correct driver index (0 or 1). If using one address, use `DRIVER_ADDR_1` for both, and use index 0 for `g_is31_leds`. + Define these arrays listing all the LEDs in your `.c`: ```c @@ -219,7 +221,7 @@ static bool my_cool_effect(effect_params_t* params) { for (uint8_t i = led_min; i < led_max; i++) { led_matrix_set_value(i, 0xFF); } - return led_max < DRIVER_LED_TOTAL; + return led_matrix_check_finished_leds(led_max); } // e.g: A more complex effect, relying on external methods and state, with @@ -233,8 +235,7 @@ static bool my_cool_effect2_complex_run(effect_params_t* params) { for (uint8_t i = led_min; i < led_max; i++) { led_matrix_set_value(i, some_global_state++); } - - return led_max < DRIVER_LED_TOTAL; + return led_matrix_check_finished_leds(led_max); } static bool my_cool_effect2(effect_params_t* params) { if (params->init) my_cool_effect2_complex_init(params); diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md index 41d0bca379..fa06e46e4a 100644 --- a/docs/feature_rgb_matrix.md +++ b/docs/feature_rgb_matrix.md @@ -49,6 +49,8 @@ Here is an example using 2 drivers. !> Note the parentheses, this is so when `DRIVER_LED_TOTAL` is used in code and expanded, the values are added together before any additional math is applied to them. As an example, `rand() % (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)` will give very different results than `rand() % DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL`. +For split keyboards using `RGB_MATRIX_SPLIT` with an LED driver, you can either have the same driver address or different driver addresses. If using different addresses, use `DRIVER_ADDR_1` for one and `DRIVER_ADDR_2` for the other one. Then, in `g_is31_leds`, fill out the correct driver index (0 or 1). If using one address, use `DRIVER_ADDR_1` for both, and use index 0 for `g_is31_leds`. + Define these arrays listing all the LEDs in your `.c`: ```c @@ -540,7 +542,7 @@ static bool my_cool_effect(effect_params_t* params) { for (uint8_t i = led_min; i < led_max; i++) { rgb_matrix_set_color(i, 0xff, 0xff, 0x00); } - return led_max < DRIVER_LED_TOTAL; + return rgb_matrix_check_finished_leds(led_max); } // e.g: A more complex effect, relying on external methods and state, with @@ -554,8 +556,7 @@ static bool my_cool_effect2_complex_run(effect_params_t* params) { for (uint8_t i = led_min; i < led_max; i++) { rgb_matrix_set_color(i, 0xff, some_global_state++, 0xff); } - - return led_max < DRIVER_LED_TOTAL; + return rgb_matrix_check_finished_leds(led_max); } static bool my_cool_effect2(effect_params_t* params) { if (params->init) my_cool_effect2_complex_init(params); diff --git a/keyboards/bandominedoni/rgb_matrix_user.inc b/keyboards/bandominedoni/rgb_matrix_user.inc index 72f5b4f664..77ad22c1ce 100644 --- a/keyboards/bandominedoni/rgb_matrix_user.inc +++ b/keyboards/bandominedoni/rgb_matrix_user.inc @@ -9,8 +9,8 @@ bool my_party_rocks(effect_params_t* params) { RGB rgb = rgb_matrix_hsv_to_rgb(hsv); // rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); rgb_matrix_set_color_all(rgb.r, rgb.g, rgb.b); - return led_max < DRIVER_LED_TOTAL; + return rgb_matrix_check_finished_leds(led_max); } -# endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS -#endif // RGB_MATRIX_KEYREACTIVE_ENABLED +# endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS +#endif // RGB_MATRIX_KEYREACTIVE_ENABLED diff --git a/keyboards/percent/canoe_gen2/rgb_matrix_kb.inc b/keyboards/percent/canoe_gen2/rgb_matrix_kb.inc index df0a0b15c2..94ff62b3a8 100644 --- a/keyboards/percent/canoe_gen2/rgb_matrix_kb.inc +++ b/keyboards/percent/canoe_gen2/rgb_matrix_kb.inc @@ -25,13 +25,13 @@ static bool indicator_static(effect_params_t* params) { HSV hsv = rgb_matrix_config.hsv; RGB rgb = hsv_to_rgb(hsv); RGB_MATRIX_USE_LIMITS(led_min, led_max); - for (uint8_t i = led_min ; i < 74; i++) { + for (uint8_t i = led_min; i < 74; i++) { rgb_matrix_set_color(i, 0x00, 0x00, 0x00); } - for (uint8_t i = 74 ; i < led_max; i++) { + for (uint8_t i = 74; i < led_max; i++) { rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); } - return led_max < DRIVER_LED_TOTAL; + return rgb_matrix_check_finished_leds(led_max); } bool effect_runner_indicator(effect_params_t* params, i_f effect_func) { @@ -47,7 +47,7 @@ bool effect_runner_indicator(effect_params_t* params, i_f effect_func) { rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); } } - return led_max < DRIVER_LED_TOTAL; + return rgb_matrix_check_finished_leds(led_max); } static HSV indicator_gradient_math(HSV hsv, uint8_t i, uint8_t time) { @@ -64,4 +64,4 @@ static HSV indicator_cycle_all_math(HSV hsv, uint8_t i, uint8_t time) { bool indicator_cycle_all(effect_params_t* params) { return effect_runner_indicator(params, &indicator_cycle_all_math); } -#endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS +#endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS diff --git a/keyboards/yushakobo/quick17/rgb_matrix_kb.inc b/keyboards/yushakobo/quick17/rgb_matrix_kb.inc index 87738389b7..0232b05ab9 100644 --- a/keyboards/yushakobo/quick17/rgb_matrix_kb.inc +++ b/keyboards/yushakobo/quick17/rgb_matrix_kb.inc @@ -111,7 +111,7 @@ static bool quick17_rgbm_effect (effect_params_t* params) { led_color_set(i, rgb_keymaps[_CONTROL][i]); } } - return led_max < DRIVER_LED_TOTAL; + return rgb_matrix_check_finished_leds(led_max); } #endif diff --git a/quantum/led_matrix/animations/alpha_mods_anim.h b/quantum/led_matrix/animations/alpha_mods_anim.h index 14038cd082..c82b2aa388 100644 --- a/quantum/led_matrix/animations/alpha_mods_anim.h +++ b/quantum/led_matrix/animations/alpha_mods_anim.h @@ -17,7 +17,7 @@ bool ALPHAS_MODS(effect_params_t* params) { led_matrix_set_value(i, val1); } } - return led_max < DRIVER_LED_TOTAL; + return led_matrix_check_finished_leds(led_max); } # endif // LED_MATRIX_CUSTOM_EFFECT_IMPLS diff --git a/quantum/led_matrix/animations/breathing_anim.h b/quantum/led_matrix/animations/breathing_anim.h index e3f600c45c..d9cc2de23b 100644 --- a/quantum/led_matrix/animations/breathing_anim.h +++ b/quantum/led_matrix/animations/breathing_anim.h @@ -12,7 +12,7 @@ bool BREATHING(effect_params_t* params) { LED_MATRIX_TEST_LED_FLAGS(); led_matrix_set_value(i, val); } - return led_max < DRIVER_LED_TOTAL; + return led_matrix_check_finished_leds(led_max); } # endif // LED_MATRIX_CUSTOM_EFFECT_IMPLS diff --git a/quantum/led_matrix/animations/runners/effect_runner_dx_dy.h b/quantum/led_matrix/animations/runners/effect_runner_dx_dy.h index ef97631b90..fa9b7dbbfa 100644 --- a/quantum/led_matrix/animations/runners/effect_runner_dx_dy.h +++ b/quantum/led_matrix/animations/runners/effect_runner_dx_dy.h @@ -12,5 +12,5 @@ bool effect_runner_dx_dy(effect_params_t* params, dx_dy_f effect_func) { int16_t dy = g_led_config.point[i].y - k_led_matrix_center.y; led_matrix_set_value(i, effect_func(led_matrix_eeconfig.val, dx, dy, time)); } - return led_max < DRIVER_LED_TOTAL; + return led_matrix_check_finished_leds(led_max); } diff --git a/quantum/led_matrix/animations/runners/effect_runner_dx_dy_dist.h b/quantum/led_matrix/animations/runners/effect_runner_dx_dy_dist.h index 5ef5938be0..061a5f07fe 100644 --- a/quantum/led_matrix/animations/runners/effect_runner_dx_dy_dist.h +++ b/quantum/led_matrix/animations/runners/effect_runner_dx_dy_dist.h @@ -13,5 +13,5 @@ bool effect_runner_dx_dy_dist(effect_params_t* params, dx_dy_dist_f effect_func) uint8_t dist = sqrt16(dx * dx + dy * dy); led_matrix_set_value(i, effect_func(led_matrix_eeconfig.val, dx, dy, dist, time)); } - return led_max < DRIVER_LED_TOTAL; + return led_matrix_check_finished_leds(led_max); } diff --git a/quantum/led_matrix/animations/runners/effect_runner_i.h b/quantum/led_matrix/animations/runners/effect_runner_i.h index b3015759be..f6f8c0dee0 100644 --- a/quantum/led_matrix/animations/runners/effect_runner_i.h +++ b/quantum/led_matrix/animations/runners/effect_runner_i.h @@ -10,5 +10,5 @@ bool effect_runner_i(effect_params_t* params, i_f effect_func) { LED_MATRIX_TEST_LED_FLAGS(); led_matrix_set_value(i, effect_func(led_matrix_eeconfig.val, i, time)); } - return led_max < DRIVER_LED_TOTAL; + return led_matrix_check_finished_leds(led_max); } diff --git a/quantum/led_matrix/animations/runners/effect_runner_reactive.h b/quantum/led_matrix/animations/runners/effect_runner_reactive.h index 4369ea8c49..be3090aa53 100644 --- a/quantum/led_matrix/animations/runners/effect_runner_reactive.h +++ b/quantum/led_matrix/animations/runners/effect_runner_reactive.h @@ -22,7 +22,7 @@ bool effect_runner_reactive(effect_params_t* params, reactive_f effect_func) { uint16_t offset = scale16by8(tick, led_matrix_eeconfig.speed); led_matrix_set_value(i, effect_func(led_matrix_eeconfig.val, offset)); } - return led_max < DRIVER_LED_TOTAL; + return led_matrix_check_finished_leds(led_max); } #endif // LED_MATRIX_KEYREACTIVE_ENABLED diff --git a/quantum/led_matrix/animations/runners/effect_runner_reactive_splash.h b/quantum/led_matrix/animations/runners/effect_runner_reactive_splash.h index d6eb9731ee..f6ffc825a1 100644 --- a/quantum/led_matrix/animations/runners/effect_runner_reactive_splash.h +++ b/quantum/led_matrix/animations/runners/effect_runner_reactive_splash.h @@ -20,7 +20,7 @@ bool effect_runner_reactive_splash(uint8_t start, effect_params_t* params, react } led_matrix_set_value(i, scale8(val, led_matrix_eeconfig.val)); } - return led_max < DRIVER_LED_TOTAL; + return led_matrix_check_finished_leds(led_max); } #endif // LED_MATRIX_KEYREACTIVE_ENABLED diff --git a/quantum/led_matrix/animations/runners/effect_runner_sin_cos_i.h b/quantum/led_matrix/animations/runners/effect_runner_sin_cos_i.h index 4a5219abd1..3145e27139 100644 --- a/quantum/led_matrix/animations/runners/effect_runner_sin_cos_i.h +++ b/quantum/led_matrix/animations/runners/effect_runner_sin_cos_i.h @@ -12,5 +12,5 @@ bool effect_runner_sin_cos_i(effect_params_t* params, sin_cos_i_f effect_func) { LED_MATRIX_TEST_LED_FLAGS(); led_matrix_set_value(i, effect_func(led_matrix_eeconfig.val, cos_value, sin_value, i, time)); } - return led_max < DRIVER_LED_TOTAL; + return led_matrix_check_finished_leds(led_max); } diff --git a/quantum/led_matrix/animations/solid_anim.h b/quantum/led_matrix/animations/solid_anim.h index 4c9e43c581..c728dbcc98 100644 --- a/quantum/led_matrix/animations/solid_anim.h +++ b/quantum/led_matrix/animations/solid_anim.h @@ -9,7 +9,7 @@ bool SOLID(effect_params_t* params) { LED_MATRIX_TEST_LED_FLAGS(); led_matrix_set_value(i, val); } - return led_max < DRIVER_LED_TOTAL; + return led_matrix_check_finished_leds(led_max); } #endif // LED_MATRIX_CUSTOM_EFFECT_IMPLS diff --git a/quantum/led_matrix/led_matrix.c b/quantum/led_matrix/led_matrix.c index 85556d1573..8d6a56f27f 100644 --- a/quantum/led_matrix/led_matrix.c +++ b/quantum/led_matrix/led_matrix.c @@ -156,20 +156,10 @@ uint8_t led_matrix_map_row_column_to_led(uint8_t row, uint8_t column, uint8_t *l void led_matrix_update_pwm_buffers(void) { led_matrix_driver.flush(); } void led_matrix_set_value(int index, uint8_t value) { -#if defined(LED_MATRIX_ENABLE) && defined(LED_MATRIX_SPLIT) - if (!is_keyboard_left() && index >= k_led_matrix_split[0]) -# ifdef USE_CIE1931_CURVE - led_matrix_driver.set_value(index - k_led_matrix_split[0], pgm_read_byte(&CIE1931_CURVE[value])); -# else - led_matrix_driver.set_value(index - k_led_matrix_split[0], value); -# endif - else if (is_keyboard_left() && index < k_led_matrix_split[0]) -#endif #ifdef USE_CIE1931_CURVE - led_matrix_driver.set_value(index, pgm_read_byte(&CIE1931_CURVE[value])); -#else - led_matrix_driver.set_value(index, value); + value = pgm_read_byte(&CIE1931_CURVE[value]); #endif + led_matrix_driver.set_value(index, value); } void led_matrix_set_value_all(uint8_t value) { diff --git a/quantum/led_matrix/led_matrix.h b/quantum/led_matrix/led_matrix.h index a7a1c983f7..f540be44ca 100644 --- a/quantum/led_matrix/led_matrix.h +++ b/quantum/led_matrix/led_matrix.h @@ -38,14 +38,33 @@ #endif #if defined(LED_MATRIX_LED_PROCESS_LIMIT) && LED_MATRIX_LED_PROCESS_LIMIT > 0 && LED_MATRIX_LED_PROCESS_LIMIT < DRIVER_LED_TOTAL -# define LED_MATRIX_USE_LIMITS(min, max) \ - uint8_t min = LED_MATRIX_LED_PROCESS_LIMIT * params->iter; \ - uint8_t max = min + LED_MATRIX_LED_PROCESS_LIMIT; \ - if (max > DRIVER_LED_TOTAL) max = DRIVER_LED_TOTAL; +# if defined(LED_MATRIX_SPLIT) +# define LED_MATRIX_USE_LIMITS(min, max) +uint8_t min = LED_MATRIX_LED_PROCESS_LIMIT * params->iter; +uint8_t max = min + LED_MATRIX_LED_PROCESS_LIMIT; +if (max > DRIVER_LED_TOTAL) max = DRIVER_LED_TOTAL; +uint8_t k_led_matrix_split[2] = LED_MATRIX_SPLIT; +if (is_keyboard_left() && (max > k_led_matrix_split[0])) max = k_led_matrix_split[0]; +if (!(is_keyboard_left()) && (min < k_led_matrix_split[0])) min = k_led_matrix_split[0]; +# else +# define LED_MATRIX_USE_LIMITS(min, max) \ + uint8_t min = LED_MATRIX_LED_PROCESS_LIMIT * params->iter; \ + uint8_t max = min + LED_MATRIX_LED_PROCESS_LIMIT; \ + if (max > DRIVER_LED_TOTAL) max = DRIVER_LED_TOTAL; +# endif #else -# define LED_MATRIX_USE_LIMITS(min, max) \ - uint8_t min = 0; \ - uint8_t max = DRIVER_LED_TOTAL; +# if defined(LED_MATRIX_SPLIT) +# define LED_MATRIX_USE_LIMITS(min, max) \ + uint8_t min = 0; \ + uint8_t max = DRIVER_LED_TOTAL; \ + const uint8_t k_led_matrix_split[2] = LED_MATRIX_SPLIT; \ + if (is_keyboard_left() && (max > k_led_matrix_split[0])) max = k_led_matrix_split[0]; \ + if (!(is_keyboard_left()) && (min < k_led_matrix_split[0])) min = k_led_matrix_split[0]; +# else +# define LED_MATRIX_USE_LIMITS(min, max) \ + uint8_t min = 0; \ + uint8_t max = DRIVER_LED_TOTAL; +# endif #endif #define LED_MATRIX_TEST_LED_FLAGS() \ @@ -147,6 +166,18 @@ typedef struct { void (*flush)(void); } led_matrix_driver_t; +static inline bool led_matrix_check_finished_leds(uint8_t led_idx) { +#if defined(LED_MATRIX_SPLIT) + if (is_keyboard_left()) { + uint8_t k_led_matrix_split[2] = LED_MATRIX_SPLIT; + return led_idx < k_led_matrix_split[0]; + } else + return led_idx < DRIVER_LED_TOTAL; +#else + return led_idx < DRIVER_LED_TOTAL; +#endif +} + extern const led_matrix_driver_t led_matrix_driver; extern led_eeconfig_t led_matrix_eeconfig; diff --git a/quantum/rgb_matrix/animations/alpha_mods_anim.h b/quantum/rgb_matrix/animations/alpha_mods_anim.h index 3f2c9b799a..b8f5072681 100644 --- a/quantum/rgb_matrix/animations/alpha_mods_anim.h +++ b/quantum/rgb_matrix/animations/alpha_mods_anim.h @@ -19,7 +19,7 @@ bool ALPHAS_MODS(effect_params_t* params) { rgb_matrix_set_color(i, rgb1.r, rgb1.g, rgb1.b); } } - return led_max < DRIVER_LED_TOTAL; + return rgb_matrix_check_finished_leds(led_max); } # endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS diff --git a/quantum/rgb_matrix/animations/breathing_anim.h b/quantum/rgb_matrix/animations/breathing_anim.h index a00ccb83a2..baac51ed15 100644 --- a/quantum/rgb_matrix/animations/breathing_anim.h +++ b/quantum/rgb_matrix/animations/breathing_anim.h @@ -13,7 +13,7 @@ bool BREATHING(effect_params_t* params) { RGB_MATRIX_TEST_LED_FLAGS(); rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); } - return led_max < DRIVER_LED_TOTAL; + return rgb_matrix_check_finished_leds(led_max); } # endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS diff --git a/quantum/rgb_matrix/animations/gradient_left_right_anim.h b/quantum/rgb_matrix/animations/gradient_left_right_anim.h index b4f2752ff7..8b13d4e488 100644 --- a/quantum/rgb_matrix/animations/gradient_left_right_anim.h +++ b/quantum/rgb_matrix/animations/gradient_left_right_anim.h @@ -15,7 +15,7 @@ bool GRADIENT_LEFT_RIGHT(effect_params_t* params) { RGB rgb = rgb_matrix_hsv_to_rgb(hsv); rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); } - return led_max < DRIVER_LED_TOTAL; + return rgb_matrix_check_finished_leds(led_max); } # endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS diff --git a/quantum/rgb_matrix/animations/gradient_up_down_anim.h b/quantum/rgb_matrix/animations/gradient_up_down_anim.h index 3fd45cf99b..7431ddcd99 100644 --- a/quantum/rgb_matrix/animations/gradient_up_down_anim.h +++ b/quantum/rgb_matrix/animations/gradient_up_down_anim.h @@ -15,7 +15,7 @@ bool GRADIENT_UP_DOWN(effect_params_t* params) { RGB rgb = rgb_matrix_hsv_to_rgb(hsv); rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); } - return led_max < DRIVER_LED_TOTAL; + return rgb_matrix_check_finished_leds(led_max); } # endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS diff --git a/quantum/rgb_matrix/animations/hue_breathing_anim.h b/quantum/rgb_matrix/animations/hue_breathing_anim.h index 6d974b8c39..82be1a4424 100644 --- a/quantum/rgb_matrix/animations/hue_breathing_anim.h +++ b/quantum/rgb_matrix/animations/hue_breathing_anim.h @@ -15,7 +15,7 @@ bool HUE_BREATHING(effect_params_t* params) { RGB_MATRIX_TEST_LED_FLAGS(); rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); } - return led_max < DRIVER_LED_TOTAL; + return rgb_matrix_check_finished_leds(led_max); } # endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS diff --git a/quantum/rgb_matrix/animations/jellybean_raindrops_anim.h b/quantum/rgb_matrix/animations/jellybean_raindrops_anim.h index 7d8eafffb9..d639ba9b6c 100644 --- a/quantum/rgb_matrix/animations/jellybean_raindrops_anim.h +++ b/quantum/rgb_matrix/animations/jellybean_raindrops_anim.h @@ -22,7 +22,7 @@ bool JELLYBEAN_RAINDROPS(effect_params_t* params) { for (int i = led_min; i < led_max; i++) { jellybean_raindrops_set_color(i, params); } - return led_max < DRIVER_LED_TOTAL; + return rgb_matrix_check_finished_leds(led_max); } # endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS diff --git a/quantum/rgb_matrix/animations/raindrops_anim.h b/quantum/rgb_matrix/animations/raindrops_anim.h index c01688e2c7..fa61f9e0b9 100644 --- a/quantum/rgb_matrix/animations/raindrops_anim.h +++ b/quantum/rgb_matrix/animations/raindrops_anim.h @@ -32,7 +32,7 @@ bool RAINDROPS(effect_params_t* params) { for (int i = led_min; i < led_max; i++) { raindrops_set_color(i, params); } - return led_max < DRIVER_LED_TOTAL; + return rgb_matrix_check_finished_leds(led_max); } # endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS diff --git a/quantum/rgb_matrix/animations/runners/effect_runner_dx_dy.h b/quantum/rgb_matrix/animations/runners/effect_runner_dx_dy.h index 4867609c81..2ad0f22c28 100644 --- a/quantum/rgb_matrix/animations/runners/effect_runner_dx_dy.h +++ b/quantum/rgb_matrix/animations/runners/effect_runner_dx_dy.h @@ -13,5 +13,5 @@ bool effect_runner_dx_dy(effect_params_t* params, dx_dy_f effect_func) { RGB rgb = rgb_matrix_hsv_to_rgb(effect_func(rgb_matrix_config.hsv, dx, dy, time)); rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); } - return led_max < DRIVER_LED_TOTAL; + return rgb_matrix_check_finished_leds(led_max); } diff --git a/quantum/rgb_matrix/animations/runners/effect_runner_dx_dy_dist.h b/quantum/rgb_matrix/animations/runners/effect_runner_dx_dy_dist.h index 9545b418d9..bcae7c79b6 100644 --- a/quantum/rgb_matrix/animations/runners/effect_runner_dx_dy_dist.h +++ b/quantum/rgb_matrix/animations/runners/effect_runner_dx_dy_dist.h @@ -14,5 +14,5 @@ bool effect_runner_dx_dy_dist(effect_params_t* params, dx_dy_dist_f effect_func) RGB rgb = rgb_matrix_hsv_to_rgb(effect_func(rgb_matrix_config.hsv, dx, dy, dist, time)); rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); } - return led_max < DRIVER_LED_TOTAL; + return rgb_matrix_check_finished_leds(led_max); } diff --git a/quantum/rgb_matrix/animations/runners/effect_runner_i.h b/quantum/rgb_matrix/animations/runners/effect_runner_i.h index 1881cd6c60..b4de2992b6 100644 --- a/quantum/rgb_matrix/animations/runners/effect_runner_i.h +++ b/quantum/rgb_matrix/animations/runners/effect_runner_i.h @@ -11,5 +11,5 @@ bool effect_runner_i(effect_params_t* params, i_f effect_func) { RGB rgb = rgb_matrix_hsv_to_rgb(effect_func(rgb_matrix_config.hsv, i, time)); rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); } - return led_max < DRIVER_LED_TOTAL; + return rgb_matrix_check_finished_leds(led_max); } diff --git a/quantum/rgb_matrix/animations/runners/effect_runner_reactive.h b/quantum/rgb_matrix/animations/runners/effect_runner_reactive.h index 75b7c0df4e..d5c1a26cef 100644 --- a/quantum/rgb_matrix/animations/runners/effect_runner_reactive.h +++ b/quantum/rgb_matrix/animations/runners/effect_runner_reactive.h @@ -23,7 +23,7 @@ bool effect_runner_reactive(effect_params_t* params, reactive_f effect_func) { RGB rgb = rgb_matrix_hsv_to_rgb(effect_func(rgb_matrix_config.hsv, offset)); rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); } - return led_max < DRIVER_LED_TOTAL; + return rgb_matrix_check_finished_leds(led_max); } #endif // RGB_MATRIX_KEYREACTIVE_ENABLED diff --git a/quantum/rgb_matrix/animations/runners/effect_runner_reactive_splash.h b/quantum/rgb_matrix/animations/runners/effect_runner_reactive_splash.h index 2e46ffb350..d3a6e4e72f 100644 --- a/quantum/rgb_matrix/animations/runners/effect_runner_reactive_splash.h +++ b/quantum/rgb_matrix/animations/runners/effect_runner_reactive_splash.h @@ -23,7 +23,7 @@ bool effect_runner_reactive_splash(uint8_t start, effect_params_t* params, react RGB rgb = rgb_matrix_hsv_to_rgb(hsv); rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); } - return led_max < DRIVER_LED_TOTAL; + return rgb_matrix_check_finished_leds(led_max); } #endif // RGB_MATRIX_KEYREACTIVE_ENABLED diff --git a/quantum/rgb_matrix/animations/runners/effect_runner_sin_cos_i.h b/quantum/rgb_matrix/animations/runners/effect_runner_sin_cos_i.h index 02351de51e..7776491d51 100644 --- a/quantum/rgb_matrix/animations/runners/effect_runner_sin_cos_i.h +++ b/quantum/rgb_matrix/animations/runners/effect_runner_sin_cos_i.h @@ -13,5 +13,5 @@ bool effect_runner_sin_cos_i(effect_params_t* params, sin_cos_i_f effect_func) { RGB rgb = rgb_matrix_hsv_to_rgb(effect_func(rgb_matrix_config.hsv, cos_value, sin_value, i, time)); rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); } - return led_max < DRIVER_LED_TOTAL; + return rgb_matrix_check_finished_leds(led_max); } diff --git a/quantum/rgb_matrix/animations/solid_color_anim.h b/quantum/rgb_matrix/animations/solid_color_anim.h index 79d63cf133..4209959468 100644 --- a/quantum/rgb_matrix/animations/solid_color_anim.h +++ b/quantum/rgb_matrix/animations/solid_color_anim.h @@ -9,7 +9,7 @@ bool SOLID_COLOR(effect_params_t* params) { RGB_MATRIX_TEST_LED_FLAGS(); rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); } - return led_max < DRIVER_LED_TOTAL; + return rgb_matrix_check_finished_leds(led_max); } #endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS diff --git a/quantum/rgb_matrix/rgb_matrix.c b/quantum/rgb_matrix/rgb_matrix.c index c260b6e1e8..558c7bd41a 100644 --- a/quantum/rgb_matrix/rgb_matrix.c +++ b/quantum/rgb_matrix/rgb_matrix.c @@ -178,14 +178,7 @@ uint8_t rgb_matrix_map_row_column_to_led(uint8_t row, uint8_t column, uint8_t *l void rgb_matrix_update_pwm_buffers(void) { rgb_matrix_driver.flush(); } -void rgb_matrix_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) { -#if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_SPLIT) - if (!is_keyboard_left() && index >= k_rgb_matrix_split[0]) - rgb_matrix_driver.set_color(index - k_rgb_matrix_split[0], red, green, blue); - else if (is_keyboard_left() && index < k_rgb_matrix_split[0]) -#endif - rgb_matrix_driver.set_color(index, red, green, blue); -} +void rgb_matrix_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) { rgb_matrix_driver.set_color(index, red, green, blue); } void rgb_matrix_set_color_all(uint8_t red, uint8_t green, uint8_t blue) { #if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_SPLIT) diff --git a/quantum/rgb_matrix/rgb_matrix.h b/quantum/rgb_matrix/rgb_matrix.h index f53e011c1b..112dfaaae5 100644 --- a/quantum/rgb_matrix/rgb_matrix.h +++ b/quantum/rgb_matrix/rgb_matrix.h @@ -48,14 +48,33 @@ #endif #if defined(RGB_MATRIX_LED_PROCESS_LIMIT) && RGB_MATRIX_LED_PROCESS_LIMIT > 0 && RGB_MATRIX_LED_PROCESS_LIMIT < DRIVER_LED_TOTAL -# define RGB_MATRIX_USE_LIMITS(min, max) \ - uint8_t min = RGB_MATRIX_LED_PROCESS_LIMIT * params->iter; \ - uint8_t max = min + RGB_MATRIX_LED_PROCESS_LIMIT; \ - if (max > DRIVER_LED_TOTAL) max = DRIVER_LED_TOTAL; +# if defined(RGB_MATRIX_SPLIT) +# define RGB_MATRIX_USE_LIMITS(min, max) \ + uint8_t min = RGB_MATRIX_LED_PROCESS_LIMIT * params->iter; \ + uint8_t max = min + RGB_MATRIX_LED_PROCESS_LIMIT; \ + if (max > DRIVER_LED_TOTAL) max = DRIVER_LED_TOTAL; \ + uint8_t k_rgb_matrix_split[2] = RGB_MATRIX_SPLIT; \ + if (is_keyboard_left() && (max > k_rgb_matrix_split[0])) max = k_rgb_matrix_split[0]; \ + if (!(is_keyboard_left()) && (min < k_rgb_matrix_split[0])) min = k_rgb_matrix_split[0]; +# else +# define RGB_MATRIX_USE_LIMITS(min, max) \ + uint8_t min = RGB_MATRIX_LED_PROCESS_LIMIT * params->iter; \ + uint8_t max = min + RGB_MATRIX_LED_PROCESS_LIMIT; \ + if (max > DRIVER_LED_TOTAL) max = DRIVER_LED_TOTAL; +# endif #else -# define RGB_MATRIX_USE_LIMITS(min, max) \ - uint8_t min = 0; \ - uint8_t max = DRIVER_LED_TOTAL; +# if defined(RGB_MATRIX_SPLIT) +# define RGB_MATRIX_USE_LIMITS(min, max) \ + uint8_t min = 0; \ + uint8_t max = DRIVER_LED_TOTAL; \ + const uint8_t k_rgb_matrix_split[2] = RGB_MATRIX_SPLIT; \ + if (is_keyboard_left() && (max > k_rgb_matrix_split[0])) max = k_rgb_matrix_split[0]; \ + if (!(is_keyboard_left()) && (min < k_rgb_matrix_split[0])) min = k_rgb_matrix_split[0]; +# else +# define RGB_MATRIX_USE_LIMITS(min, max) \ + uint8_t min = 0; \ + uint8_t max = DRIVER_LED_TOTAL; +# endif #endif #define RGB_MATRIX_INDICATOR_SET_COLOR(i, r, g, b) \ @@ -214,6 +233,18 @@ typedef struct { void (*flush)(void); } rgb_matrix_driver_t; +static inline bool rgb_matrix_check_finished_leds(uint8_t led_idx) { +#if defined(RGB_MATRIX_SPLIT) + if (is_keyboard_left()) { + uint8_t k_rgb_matrix_split[2] = RGB_MATRIX_SPLIT; + return led_idx < k_rgb_matrix_split[0]; + } else + return led_idx < DRIVER_LED_TOTAL; +#else + return led_idx < DRIVER_LED_TOTAL; +#endif +} + extern const rgb_matrix_driver_t rgb_matrix_driver; extern rgb_config_t rgb_matrix_config; diff --git a/quantum/rgb_matrix/rgb_matrix_drivers.c b/quantum/rgb_matrix/rgb_matrix_drivers.c index 4335088eb8..949cc36612 100644 --- a/quantum/rgb_matrix/rgb_matrix_drivers.c +++ b/quantum/rgb_matrix/rgb_matrix_drivers.c @@ -250,6 +250,14 @@ static void flush(void) { // Set an led in the buffer to a color static inline void setled(int i, uint8_t r, uint8_t g, uint8_t b) { +# if defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_SPLIT) + const uint8_t k_rgb_matrix_split[2] = RGB_MATRIX_SPLIT; + if (!is_keyboard_left() && (i >= k_rgb_matrix_split[0])) { + i -= k_rgb_matrix_split[0]; + } else if (is_keyboard_left() && (i >= k_rgb_matrix_split[0])) + return; +# endif + rgb_matrix_ws2812_array[i].r = r; rgb_matrix_ws2812_array[i].g = g; rgb_matrix_ws2812_array[i].b = b; From f775da96b17ceec66bac279434325b4da5cb9467 Mon Sep 17 00:00:00 2001 From: Woody <1218459+agodinhost@users.noreply.github.com> Date: Mon, 1 Nov 2021 19:11:55 -0300 Subject: [PATCH 386/595] define to AUTO_SHIFT_DISABLED_AT_STARTUP (#14201) Co-authored-by: agodinhost --- quantum/process_keycode/process_auto_shift.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/quantum/process_keycode/process_auto_shift.c b/quantum/process_keycode/process_auto_shift.c index 51b0efdb47..cc3a974ea8 100644 --- a/quantum/process_keycode/process_auto_shift.c +++ b/quantum/process_keycode/process_auto_shift.c @@ -21,6 +21,12 @@ # include "process_auto_shift.h" +#ifndef AUTO_SHIFT_DISABLED_AT_STARTUP +# define AUTO_SHIFT_STARTUP_STATE true /* enabled */ +#else +# define AUTO_SHIFT_STARTUP_STATE false /* disabled */ +#endif + static uint16_t autoshift_time = 0; static uint16_t autoshift_timeout = AUTO_SHIFT_TIMEOUT; static uint16_t autoshift_lastkey = KC_NO; @@ -34,7 +40,7 @@ static struct { bool in_progress : 1; // Whether the auto-shifted keypress has been registered. bool holding_shift : 1; -} autoshift_flags = {true, false, false, false}; +} autoshift_flags = {AUTO_SHIFT_STARTUP_STATE, false, false, false}; /** \brief Record the press of an autoshiftable key * From 9d235d4fc5c34f372b0c393f41686b5ef4f8dc13 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Mon, 1 Nov 2021 15:42:50 -0700 Subject: [PATCH 387/595] [Core] Change OLED task function to be boolean (#14864) * [Core] Add kb level callbacks to OLED driver * Update keyboards and keymaps * Update docs * Update userspace configs * Add fix for my keymap ... * update lefty --- docs/feature_oled_driver.md | 11 +- drivers/oled/oled_driver.h | 4 +- drivers/oled/ssd1306_sh1106.c | 10 +- keyboards/0xcb/1337/keymaps/conor/keymap.c | 3 +- keyboards/0xcb/1337/keymaps/default/keymap.c | 3 +- keyboards/0xcb/1337/keymaps/jakob/keymap.c | 3 +- keyboards/0xcb/1337/keymaps/via/keymap.c | 3 +- .../0xcb/static/keymaps/bongocat/keymap.c | 3 +- .../0xcb/static/keymaps/default/keymap.c | 3 +- keyboards/0xcb/static/keymaps/via/keymap.c | 3 +- .../10bleoledhub/keymaps/default/keymap.c | 5 +- keyboards/10bleoledhub/keymaps/via/keymap.c | 5 +- .../aeboards/ext65/keymaps/default/keymap.c | 3 +- keyboards/aeboards/ext65/keymaps/via/keymap.c | 3 +- keyboards/aeboards/ext65/rev2/rev2.c | 2 +- .../zodiark/keymaps/default/keymap.c | 3 +- .../zodiark/keymaps/slimoled/keymap.c | 3 +- .../aleblazer/zodiark/keymaps/via/oled.c | 3 +- .../anavi/macropad8/keymaps/default/keymap.c | 3 +- .../anavi/macropad8/keymaps/git/keymap.c | 3 +- .../anavi/macropad8/keymaps/kicad/keymap.c | 3 +- .../anavi/macropad8/keymaps/kodi/keymap.c | 3 +- .../anavi/macropad8/keymaps/obs/keymap.c | 3 +- .../anavi/macropad8/keymaps/zoom/keymap.c | 3 +- .../angel64/alpha/keymaps/default/keymap.c | 3 +- .../angel64/rev1/keymaps/default/keymap.c | 3 +- .../angel64/rev1/keymaps/kakunpc/keymap.c | 3 +- .../aplx6/rev2/keymaps/default/keymap.c | 3 +- keyboards/arabica37/keymaps/default/keymap.c | 3 +- keyboards/arch_36/keymaps/default/keymap.c | 3 +- keyboards/arch_36/keymaps/obosob/keymap.c | 3 +- .../basekeys/slice/keymaps/default/keymap.c | 3 +- .../keymaps/default_split_left_space/keymap.c | 3 +- .../rev1_rgb/keymaps/2moons_rgb/keymap.c | 3 +- .../slice/rev1_rgb/keymaps/via/keymap.c | 3 +- .../holiday/spooky/keymaps/rip_mx/keymap.c | 3 +- .../spooky/keymaps/rip_my_wallet/keymap.c | 3 +- .../microdox/keymaps/cole/keymap.c | 3 +- .../boardsource/microdox/keymaps/via/keymap.c | 3 +- keyboards/boston_meetup/2019/2019.c | 12 +- .../alpha/keymaps/default/keymap.c | 5 +- .../beta/keymaps/default/keymap.c | 5 +- .../satisfaction75/satisfaction_oled.c | 10 +- keyboards/cassette42/keymaps/default/keymap.c | 3 +- .../chidori/keymaps/oled_sample/keymap.c | 3 +- .../ckeys/washington/keymaps/default/keymap.c | 3 +- keyboards/claw44/keymaps/oled/keymap.c | 3 +- keyboards/crkbd/keymaps/armand1m/keymap.c | 3 +- keyboards/crkbd/keymaps/blipson/keymap.c | 3 +- keyboards/crkbd/keymaps/default/keymap.c | 3 +- keyboards/crkbd/keymaps/devdev/keymap.c | 3 +- keyboards/crkbd/keymaps/dsanchezseco/keymap.c | 3 +- keyboards/crkbd/keymaps/edvorakjp/oled.c | 3 +- keyboards/crkbd/keymaps/gotham/oled.c | 3 +- keyboards/crkbd/keymaps/kidbrazil/keymap.c | 3 +- keyboards/crkbd/keymaps/mcrown/oled.c | 3 +- keyboards/crkbd/keymaps/oled_sample/keymap.c | 3 +- keyboards/crkbd/keymaps/oo/keymap.c | 3 +- keyboards/crkbd/keymaps/rarick/keymap.c | 3 +- keyboards/crkbd/keymaps/rjhilgefort/keymap.c | 3 +- keyboards/crkbd/keymaps/rpbaptist/keymap.c | 3 +- keyboards/crkbd/keymaps/soundmonster/keymap.c | 3 +- keyboards/crkbd/keymaps/sulrich/keymap.c | 4 +- keyboards/crkbd/keymaps/vayashiko/keymap.c | 3 +- keyboards/crkbd/keymaps/via/keymap.c | 3 +- keyboards/crkbd/keymaps/xyverz/keymap.c | 3 +- .../duckypad/keymaps/default/keymap.c | 3 +- .../dekunukem/duckypad/keymaps/m4cs/keymap.c | 3 +- .../dekunukem/duckypad/keymaps/via/keymap.c | 4 +- .../dmqdesign/spin/keymaps/gorbachev/keymap.c | 3 +- .../duckboard/keymaps/default/keymap.c | 3 +- .../duckboard_r2/keymaps/default/keymap.c | 3 +- .../duckboard_r2/keymaps/via/keymap.c | 3 +- keyboards/draculad/keymaps/default/keymap.c | 3 +- keyboards/draculad/keymaps/pimoroni/keymap.c | 3 +- keyboards/dumbo/keymaps/default/keymap.c | 3 +- keyboards/dumbo/keymaps/trip-trap/keymap.c | 3 +- keyboards/ein_60/ein_60.c | 5 +- keyboards/ein_60/keymaps/default/keymap.c | 3 +- keyboards/ein_60/keymaps/klackygears/keymap.c | 7 +- keyboards/ein_60/keymaps/ledtest/keymap.c | 4 +- keyboards/gergo/keymaps/oled/keymap.c | 3 +- keyboards/getta25/keymaps/oled/keymap.c | 3 +- keyboards/hadron/ver2/ver2.c | 12 +- keyboards/hadron/ver3/ver3.c | 12 +- keyboards/halfcliff/halfcliff.c | 9 +- .../amigopunk/keymaps/default/keymap.c | 3 +- .../handwired/d48/keymaps/anderson/keymap.c | 3 +- .../handwired/d48/keymaps/default/keymap.c | 3 +- .../5x6_5/keymaps/333fred/keymap.c | 3 +- .../handwired/marauder/keymaps/orvia/keymap.c | 3 +- keyboards/handwired/myskeeb/oled.c | 191 +++++++++--------- .../spaget/keymaps/default/keymap.c | 3 +- .../handwired/onekey/keymaps/oled/keymap.c | 3 +- .../owlet60/keymaps/oled_testing/keymap.c | 3 +- .../handwired/pill60/keymaps/default/keymap.c | 3 +- keyboards/handwired/split65/split65.c | 10 +- .../koalafications/keymaps/default/keymap.c | 3 +- .../koalafications/keymaps/via/keymap.c | 3 +- .../the_galleon/keymaps/default/keymap.c | 3 +- .../swiftrax/the_galleon/keymaps/via/keymap.c | 3 +- .../helix/rev2/keymaps/default/oled_display.c | 3 +- keyboards/helix/rev2/keymaps/edvorakjp/oled.c | 3 +- .../rev2/keymaps/five_rows/oled_display.c | 3 +- .../rev3_4rows/keymaps/default/oled_display.c | 3 +- .../rev3_4rows/keymaps/via/oled_display.c | 3 +- keyboards/helix/rev3_4rows/rev3_4rows.c | 5 +- .../rev3_5rows/keymaps/default/oled_display.c | 3 +- .../keymaps/five_rows/oled_display.c | 3 +- .../rev3_5rows/keymaps/via/oled_display.c | 3 +- keyboards/helix/rev3_5rows/rev3_5rows.c | 5 +- keyboards/jagdpietr/drakon/drakon.c | 14 +- .../keybage/radpad/keymaps/default/keymap.c | 3 +- .../keycapsss/kimiko/keymaps/default/keymap.c | 3 +- .../plaid_pad/keymaps/default/keymap.c | 3 +- .../keycapsss/plaid_pad/keymaps/oled/keymap.c | 3 +- .../keycapsss/plaid_pad/keymaps/via/keymap.c | 3 +- .../kikoslab/kl90/keymaps/default/keymap.c | 3 +- keyboards/kikoslab/kl90/keymaps/via/keymap.c | 3 +- .../romac/keymaps/boss566y/keymap.c | 3 +- .../romac_plus/keymaps/default/keymap.c | 4 +- .../wanderland/keymaps/stanrc85/keymap.c | 4 +- .../knobgoblin/keymaps/moults31/keymap.c | 3 +- keyboards/knobgoblin/knobgoblin.c | 10 +- keyboards/latinpad/keymaps/default/keymap.c | 5 +- keyboards/latinpad/keymaps/via/keymap.c | 5 +- .../latinpadble/keymaps/default/keymap.c | 5 +- keyboards/latinpadble/keymaps/via/keymap.c | 5 +- keyboards/lck75/lck75.c | 9 +- keyboards/le_chiffre/keymaps/default/keymap.c | 4 +- keyboards/le_chiffre/keymaps/via/keymap.c | 3 +- keyboards/lefty/lefty.c | 5 +- keyboards/lily58/keymaps/barabas/keymap.c | 3 +- keyboards/lily58/keymaps/chuan/keymap.c | 3 +- keyboards/lily58/keymaps/cykedev/keymap.c | 4 +- keyboards/lily58/keymaps/datadavd/keymap.c | 4 +- keyboards/lily58/keymaps/default/keymap.c | 3 +- keyboards/lily58/keymaps/domnantas/keymap.c | 31 +-- keyboards/lily58/keymaps/drasbeck/keymap.c | 3 +- keyboards/lily58/keymaps/lily58l/keymap.c | 3 +- .../lily58/keymaps/mikefightsbears/keymap.c | 4 +- keyboards/lily58/keymaps/muuko/keymap.c | 3 +- keyboards/lily58/keymaps/narze/keymap.c | 3 +- keyboards/lily58/keymaps/via/keymap.c | 3 +- keyboards/lily58/keymaps/yshrsmz/keymap.c | 3 +- keyboards/lily58/keymaps/yuchi/keymap.c | 3 +- keyboards/lyra/lyra.c | 102 +++++----- .../rhymestone/keymaps/default/keymap.c | 3 +- .../mechllama/g35/keymaps/default/keymap.c | 3 +- .../mercutio/keymaps/bongocat/keymap.c | 3 +- .../mercutio/keymaps/default/keymap.c | 3 +- .../mechwild/mercutio/keymaps/fancy/keymap.c | 3 +- .../mercutio/keymaps/jonavin/keymap.c | 3 +- .../mechwild/mercutio/keymaps/via/keymap.c | 3 +- .../murphpad/keymaps/default/keymap.c | 3 +- .../murphpad/keymaps/jonavin/keymap.c | 6 +- .../mechwild/murphpad/keymaps/via/keymap.c | 3 +- keyboards/merge/um70/keymaps/default/keymap.c | 3 +- keyboards/merge/um70/keymaps/via/keymap.c | 3 +- .../misonoworks/chocolatebar/chocolatebar.c | 10 +- .../rebound/rev3/keymaps/rossman360/keymap.c | 3 +- .../rebound/rev4/keymaps/rossman360/keymap.c | 3 +- .../nullbitsco/nibble/keymaps/oled/keymap.c | 3 +- .../nibble/keymaps/oled_bongocat/keymap.c | 4 +- .../nibble/keymaps/oled_status/keymap.c | 3 +- .../nibble/keymaps/snailmap/keymap.c | 135 +++++++------ .../nullbitsco/scramble/keymaps/oled/keymap.c | 3 +- .../palette1202/keymaps/default/keymap.c | 3 +- .../palette1202/keymaps/key-check/keymap.c | 3 +- keyboards/palette1202/palette1202.c | 4 +- .../pistachio_pro/keymaps/default/keymap.c | 6 +- keyboards/pistachio_pro/keymaps/rate/keymap.c | 6 +- keyboards/pistachio_pro/keymaps/via/keymap.c | 6 +- .../plut0nium/0x3e/keymaps/default/keymap.c | 25 +-- keyboards/pteron36/keymaps/via/keymap.c | 31 +-- keyboards/pteron36/pteron36.c | 6 +- keyboards/rainkeeb/keymaps/default/keymap.c | 3 +- keyboards/rainkeeb/keymaps/via/keymap.c | 3 +- .../herringbone/pro/keymaps/default/keymap.c | 3 +- .../herringbone/pro/keymaps/iso/keymap.c | 3 +- .../herringbone/pro/keymaps/via/keymap.c | 3 +- keyboards/rart/rart67m/rart67m.c | 11 +- keyboards/rart/rart75m/rart75m.c | 7 +- .../rart/rartand/keymaps/default/keymap.c | 3 +- keyboards/rart/rartand/keymaps/via/keymap.c | 3 +- keyboards/rart/rartland/rartland.c | 7 +- .../rart/rartlice/keymaps/default/keymap.c | 3 +- keyboards/rart/rartlice/keymaps/via/keymap.c | 3 +- keyboards/rgbkb/mun/keymaps/default/keymap.c | 3 +- keyboards/rgbkb/mun/keymaps/via/keymap.c | 3 +- keyboards/rgbkb/mun/keymaps/xulkal2/keymap.c | 7 +- keyboards/rgbkb/pan/keymaps/default/keymap.c | 4 +- .../rgbkb/sol/keymaps/brianweyer/keymap.c | 4 +- .../rgbkb/sol/keymaps/danielhklein/keymap.c | 4 +- keyboards/rgbkb/sol/keymaps/default/keymap.c | 3 +- keyboards/rgbkb/sol/keymaps/xyverz/keymap.c | 3 +- keyboards/rgbkb/zen/rev2/rev2.c | 9 +- .../zygomorph/keymaps/default_oled/keymap.c | 3 +- keyboards/ristretto/ristretto.c | 10 +- .../rocketboard_16/keymaps/default/keymap.c | 3 +- keyboards/rocketboard_16/keymaps/via/keymap.c | 3 +- keyboards/rubi/lib/oled.c | 6 +- .../satxri6key/keymaps/via/keymap.c | 3 +- .../sendyyeah/pix/keymaps/default/keymap.c | 3 +- keyboards/sendyyeah/pix/keymaps/via/keymap.c | 3 +- keyboards/setta21/keymaps/salicylic/keymap.c | 3 +- keyboards/sofle/keymaps/default/keymap.c | 3 +- keyboards/sofle/keymaps/devdev/keymap.c | 3 +- keyboards/sofle/keymaps/helltm/keymap.c | 3 +- .../sofle/keymaps/j4ckofalltrades/oled.c | 3 +- keyboards/sofle/keymaps/killmaster/keymap.c | 3 +- keyboards/sofle/keymaps/rgb_default/keymap.c | 3 +- keyboards/sofle/keymaps/via/oled.c | 3 +- keyboards/spaceman/pancake/rev2/rev2.c | 9 +- .../splitkb/kyria/keymaps/asapjockey/keymap.c | 3 +- .../splitkb/kyria/keymaps/benji/keymap.c | 3 +- .../splitkb/kyria/keymaps/cjuniet/keymap.c | 3 +- .../splitkb/kyria/keymaps/cwebster2/keymap.c | 3 +- .../splitkb/kyria/keymaps/default/keymap.c | 3 +- .../splitkb/kyria/keymaps/ghidalgo93/keymap.c | 3 +- .../splitkb/kyria/keymaps/gotham/keymap.c | 5 +- .../splitkb/kyria/keymaps/j-inc/keymap.c | 3 +- .../splitkb/kyria/keymaps/jhelvy/keymap.c | 3 +- .../splitkb/kyria/keymaps/john-ezra/oled.c | 3 +- .../splitkb/kyria/keymaps/mattir/keymap.c | 3 +- .../splitkb/kyria/keymaps/ninjonas/oled.c | 3 +- .../splitkb/kyria/keymaps/plattfot/keymap.c | 3 +- .../splitkb/kyria/keymaps/shinze/keymap.c | 3 +- .../splitkb/kyria/keymaps/tessachka/keymap.c | 3 +- .../kyria/keymaps/thomasbaart/keymap.c | 3 +- keyboards/splitkb/kyria/keymaps/via/keymap.c | 3 +- .../splitkb/kyria/keymaps/winternebs/keymap.c | 3 +- .../splitkb/kyria/keymaps/zigotica/oled.c | 4 +- keyboards/splitkb/kyria/rev1/rev1.c | 10 +- .../splitkb/zima/keymaps/drashna/keymap.c | 5 +- keyboards/splitkb/zima/zima.c | 12 +- .../suihankey/alpha/keymaps/default/keymap.c | 4 +- .../suihankey/rev1/keymaps/default/keymap.c | 4 +- .../endzone34/keymaps/default/keymap.c | 3 +- keyboards/tau4/keymaps/default/keymap.c | 3 +- .../macrowo_pad/keymaps/default/keymap.c | 3 +- .../tender/macrowo_pad/keymaps/via/keymap.c | 3 +- keyboards/tkc/m0lly/keymaps/default/keymap.c | 4 +- keyboards/tkc/m0lly/keymaps/via/keymap.c | 4 +- .../tkc/tkc1800/keymaps/default/keymap.c | 4 +- keyboards/tkc/tkc1800/keymaps/smt/keymap.c | 4 +- keyboards/tkc/tkc1800/keymaps/via/keymap.c | 4 +- keyboards/tkc/tkc1800/keymaps/wkl/keymap.c | 4 +- .../tkc/tkc1800/keymaps/yanfali/keymap.c | 4 +- .../tkw/grandiceps/keymaps/default/keymap.c | 3 +- keyboards/torn/bongocat.c | 8 +- .../treadstone48/keymaps/default/keymap.c | 3 +- .../treadstone48/keymaps/like_jis/keymap.c | 3 +- .../rev1/keymaps/like_jis_rs/keymap.c | 3 +- .../launch_pad/keymaps/default/keymap.c | 3 +- .../ungodly/launch_pad/keymaps/via/keymap.c | 3 +- .../launch_pad/keymaps/warzone/keymap.c | 3 +- keyboards/uzu42/keymaps/default/keymap.c | 3 +- keyboards/work_louder/work_board/work_board.c | 11 +- keyboards/yampad/keymaps/default/keymap.c | 4 +- keyboards/yampad/keymaps/traditional/keymap.c | 4 +- keyboards/yampad/keymaps/via/keymap.c | 4 +- keyboards/yampad/yampad.c | 13 +- keyboards/z12/keymaps/zigotica/oled.c | 4 +- keyboards/zoo/wampus/wampus.c | 3 +- users/curry/oled.c | 3 +- users/drashna/oled_stuff.c | 3 +- users/ninjonas/oled.c | 3 +- users/riblee/riblee.c | 7 +- users/snowe/oled_setup.c | 3 +- users/tominabox1/tominabox1.c | 3 +- users/xulkal/custom_oled.c | 3 +- 272 files changed, 967 insertions(+), 599 deletions(-) diff --git a/docs/feature_oled_driver.md b/docs/feature_oled_driver.md index 908bd801c4..fc63e492d3 100644 --- a/docs/feature_oled_driver.md +++ b/docs/feature_oled_driver.md @@ -38,7 +38,7 @@ Then in your `keymap.c` file, implement the OLED task call. This example assumes ```c #ifdef OLED_ENABLE -void oled_task_user(void) { +bool oled_task_user(void) { // Host Keyboard Layer Status oled_write_P(PSTR("Layer: "), false); @@ -62,6 +62,8 @@ void oled_task_user(void) { oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false); oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false); oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false); + + return false; } #endif ``` @@ -133,13 +135,14 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return rotation; } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { render_status(); // Renders the current keyboard state (layer, lock, caps, scroll, etc) } else { render_logo(); // Renders a static logo oled_scroll_left(); // Turns on scrolling } + return false; } #endif ``` @@ -237,6 +240,7 @@ bool oled_init(oled_rotation_t rotation); // Called at the start of oled_init, weak function overridable by the user // rotation - the value passed into oled_init // Return new oled_rotation_t if you want to override default rotation +oled_rotation_t oled_init_kb(oled_rotation_t rotation); oled_rotation_t oled_init_user(oled_rotation_t rotation); // Clears the display buffer, resets cursor position to 0, and sets the buffer to dirty for rendering @@ -328,7 +332,8 @@ uint8_t oled_get_brightness(void); void oled_task(void); // Called at the start of oled_task, weak function overridable by the user -void oled_task_user(void); +bool oled_task_kb(void); +bool oled_task_user(void); // Set the specific 8 lines rows of the screen to scroll. // 0 is the default for start, and 7 for end, which is the entire diff --git a/drivers/oled/oled_driver.h b/drivers/oled/oled_driver.h index 13b73ede9d..3b56d370dc 100644 --- a/drivers/oled/oled_driver.h +++ b/drivers/oled/oled_driver.h @@ -190,6 +190,7 @@ bool oled_init(oled_rotation_t rotation); // Called at the start of oled_init, weak function overridable by the user // rotation - the value passed into oled_init // Return new oled_rotation_t if you want to override default rotation +oled_rotation_t oled_init_kb(oled_rotation_t rotation); oled_rotation_t oled_init_user(oled_rotation_t rotation); // Clears the display buffer, resets cursor position to 0, and sets the buffer to dirty for rendering @@ -285,7 +286,8 @@ uint8_t oled_get_brightness(void); void oled_task(void); // Called at the start of oled_task, weak function overridable by the user -void oled_task_user(void); +bool oled_task_kb(void); +bool oled_task_user(void); // Set the specific 8 lines rows of the screen to scroll. // 0 is the default for start, and 7 for end, which is the entire diff --git a/drivers/oled/ssd1306_sh1106.c b/drivers/oled/ssd1306_sh1106.c index e9049438f5..d9bd3c14bd 100644 --- a/drivers/oled/ssd1306_sh1106.c +++ b/drivers/oled/ssd1306_sh1106.c @@ -167,7 +167,7 @@ bool oled_init(oled_rotation_t rotation) { } #endif - oled_rotation = oled_init_user(rotation); + oled_rotation = oled_init_user(oled_init_kb(rotation)); if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) { oled_rotation_width = OLED_DISPLAY_WIDTH; } else { @@ -232,6 +232,7 @@ bool oled_init(oled_rotation_t rotation) { return true; } +__attribute__((weak)) oled_rotation_t oled_init_kb(oled_rotation_t rotation) { return rotation; } __attribute__((weak)) oled_rotation_t oled_init_user(oled_rotation_t rotation) { return rotation; } void oled_clear(void) { @@ -741,11 +742,11 @@ void oled_task(void) { if (timer_elapsed(oled_update_timeout) >= OLED_UPDATE_INTERVAL) { oled_update_timeout = timer_read(); oled_set_cursor(0, 0); - oled_task_user(); + oled_task_kb(); } #else oled_set_cursor(0, 0); - oled_task_user(); + oled_task_kb(); #endif #if OLED_SCROLL_TIMEOUT > 0 @@ -776,4 +777,5 @@ void oled_task(void) { #endif } -__attribute__((weak)) void oled_task_user(void) {} +__attribute__((weak)) bool oled_task_kb(void) { return oled_task_user(); } +__attribute__((weak)) bool oled_task_user(void) { return true; } diff --git a/keyboards/0xcb/1337/keymaps/conor/keymap.c b/keyboards/0xcb/1337/keymaps/conor/keymap.c index 63c3ea9f58..615ca7baf8 100644 --- a/keyboards/0xcb/1337/keymaps/conor/keymap.c +++ b/keyboards/0xcb/1337/keymaps/conor/keymap.c @@ -168,7 +168,7 @@ static void render_rgbled_status(bool) { oled_write_ln_P(PSTR("\n"), false); } } -void oled_task_user(void) { +bool oled_task_user(void) { static bool finished_timer = false; if (!finished_timer && (timer_elapsed(startup_timer) < 1000)) { render_logo(); @@ -181,5 +181,6 @@ void oled_task_user(void) { render_rgbled_status(true); render_logo_font(); } + return false; } #endif diff --git a/keyboards/0xcb/1337/keymaps/default/keymap.c b/keyboards/0xcb/1337/keymaps/default/keymap.c index b79ecb767e..751af6f4f7 100644 --- a/keyboards/0xcb/1337/keymaps/default/keymap.c +++ b/keyboards/0xcb/1337/keymaps/default/keymap.c @@ -159,7 +159,7 @@ static void render_rgbled_status(void) { oled_write_ln_P(PSTR("\n"), false); } } -void oled_task_user(void) { +bool oled_task_user(void) { static bool finished_timer = false; if (!finished_timer && (timer_elapsed(startup_timer) < 1000)) { render_logo(); @@ -172,5 +172,6 @@ void oled_task_user(void) { render_rgbled_status(); render_logo_font(); } + return false; } #endif diff --git a/keyboards/0xcb/1337/keymaps/jakob/keymap.c b/keyboards/0xcb/1337/keymaps/jakob/keymap.c index 190fee21c6..f4a075844f 100644 --- a/keyboards/0xcb/1337/keymaps/jakob/keymap.c +++ b/keyboards/0xcb/1337/keymaps/jakob/keymap.c @@ -168,7 +168,7 @@ static void render_rgbled_status(bool) { oled_write_ln_P(PSTR("\n"), false); } } -void oled_task_user(void) { +bool oled_task_user(void) { static bool finished_timer = false; if (!finished_timer && (timer_elapsed(startup_timer) < 1000)) { render_logo(); @@ -181,5 +181,6 @@ void oled_task_user(void) { render_rgbled_status(true); render_logo_font(); } + return false; } #endif diff --git a/keyboards/0xcb/1337/keymaps/via/keymap.c b/keyboards/0xcb/1337/keymaps/via/keymap.c index eefa67ddb6..a85670e06e 100644 --- a/keyboards/0xcb/1337/keymaps/via/keymap.c +++ b/keyboards/0xcb/1337/keymaps/via/keymap.c @@ -168,7 +168,7 @@ static void render_rgbled_status(void) { oled_write_ln_P(PSTR("\n"), false); } } -void oled_task_user(void) { +bool oled_task_user(void) { static bool finished_timer = false; if (!finished_timer && (timer_elapsed(startup_timer) < 1000)) { render_logo(); @@ -181,5 +181,6 @@ void oled_task_user(void) { render_rgbled_status(); render_logo_font(); } + return false; } #endif diff --git a/keyboards/0xcb/static/keymaps/bongocat/keymap.c b/keyboards/0xcb/static/keymaps/bongocat/keymap.c index d7f6db08cc..acdc521847 100644 --- a/keyboards/0xcb/static/keymaps/bongocat/keymap.c +++ b/keyboards/0xcb/static/keymaps/bongocat/keymap.c @@ -262,7 +262,7 @@ static void render_cat(void) { } } -void oled_task_user(void) { +bool oled_task_user(void) { static bool finished_timer = false; if (!finished_timer && (timer_elapsed(startup_timer) < 3000)) { render_logo(); @@ -286,6 +286,7 @@ void oled_task_user(void) { render_layer(); } } + return false; } #endif diff --git a/keyboards/0xcb/static/keymaps/default/keymap.c b/keyboards/0xcb/static/keymaps/default/keymap.c index 139c257e66..4d0d14ff7e 100644 --- a/keyboards/0xcb/static/keymaps/default/keymap.c +++ b/keyboards/0xcb/static/keymaps/default/keymap.c @@ -175,7 +175,7 @@ static void render_layer(void) { oled_write_P(logo[3][2], false); } -void oled_task_user(void) { +bool oled_task_user(void) { static bool finished_timer = false; if (!finished_timer && (timer_elapsed(startup_timer) < 3000)) { render_logo(); @@ -186,5 +186,6 @@ void oled_task_user(void) { } render_layer(); } + return false; } #endif diff --git a/keyboards/0xcb/static/keymaps/via/keymap.c b/keyboards/0xcb/static/keymaps/via/keymap.c index 6bb24c1fad..62fcca1f3c 100644 --- a/keyboards/0xcb/static/keymaps/via/keymap.c +++ b/keyboards/0xcb/static/keymaps/via/keymap.c @@ -175,7 +175,7 @@ static void render_layer(void) { oled_write_P(logo[3][2], false); } -void oled_task_user(void) { +bool oled_task_user(void) { static bool finished_timer = false; if (!finished_timer && (timer_elapsed(startup_timer) < 3000)) { render_logo(); @@ -186,6 +186,7 @@ void oled_task_user(void) { } render_layer(); } + return false; } #endif diff --git a/keyboards/10bleoledhub/keymaps/default/keymap.c b/keyboards/10bleoledhub/keymaps/default/keymap.c index 84c1f10680..806d913128 100644 --- a/keyboards/10bleoledhub/keymaps/default/keymap.c +++ b/keyboards/10bleoledhub/keymaps/default/keymap.c @@ -55,7 +55,10 @@ static void render_logo(void) { } #ifdef OLED_ENABLE -void oled_task_user(void) { render_logo(); } +bool oled_task_user(void) { + render_logo(); + return false; +} #endif bool encoder_update_user(uint8_t index, bool clockwise) { diff --git a/keyboards/10bleoledhub/keymaps/via/keymap.c b/keyboards/10bleoledhub/keymaps/via/keymap.c index df7130e80b..316819acf5 100644 --- a/keyboards/10bleoledhub/keymaps/via/keymap.c +++ b/keyboards/10bleoledhub/keymaps/via/keymap.c @@ -55,7 +55,10 @@ static void render_logo(void) { } #ifdef OLED_ENABLE -void oled_task_user(void) { render_logo(); } +bool oled_task_user(void) { + render_logo(); + return false; +} #endif bool encoder_update_user(uint8_t index, bool clockwise) { diff --git a/keyboards/aeboards/ext65/keymaps/default/keymap.c b/keyboards/aeboards/ext65/keymaps/default/keymap.c index 466b34539f..1f933ca1ca 100644 --- a/keyboards/aeboards/ext65/keymaps/default/keymap.c +++ b/keyboards/aeboards/ext65/keymaps/default/keymap.c @@ -89,10 +89,11 @@ void render_mod_status(uint8_t modifiers) { oled_write_ln(PSTR(" "), false); } -void oled_task_user(void) { +bool oled_task_user(void) { render_layer_state(); render_keylock_status(host_keyboard_led_state()); render_mod_status(get_mods()|get_oneshot_mods()); + return false; } #endif diff --git a/keyboards/aeboards/ext65/keymaps/via/keymap.c b/keyboards/aeboards/ext65/keymaps/via/keymap.c index 466b34539f..1f933ca1ca 100644 --- a/keyboards/aeboards/ext65/keymaps/via/keymap.c +++ b/keyboards/aeboards/ext65/keymaps/via/keymap.c @@ -89,10 +89,11 @@ void render_mod_status(uint8_t modifiers) { oled_write_ln(PSTR(" "), false); } -void oled_task_user(void) { +bool oled_task_user(void) { render_layer_state(); render_keylock_status(host_keyboard_led_state()); render_mod_status(get_mods()|get_oneshot_mods()); + return false; } #endif diff --git a/keyboards/aeboards/ext65/rev2/rev2.c b/keyboards/aeboards/ext65/rev2/rev2.c index ce16eb4c48..f303a122e9 100644 --- a/keyboards/aeboards/ext65/rev2/rev2.c +++ b/keyboards/aeboards/ext65/rev2/rev2.c @@ -9,7 +9,7 @@ void board_init(void) { SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_SPI2_DMA_RMP); } -oled_rotation_t oled_init_user(oled_rotation_t rotation) { +oled_rotation_t oled_init_kb(oled_rotation_t rotation) { return OLED_ROTATION_90; // rotates the display 90 degrees } diff --git a/keyboards/aleblazer/zodiark/keymaps/default/keymap.c b/keyboards/aleblazer/zodiark/keymaps/default/keymap.c index 84953ec582..c6a81c67f9 100644 --- a/keyboards/aleblazer/zodiark/keymaps/default/keymap.c +++ b/keyboards/aleblazer/zodiark/keymaps/default/keymap.c @@ -135,12 +135,13 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return rotation; } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { print_status_narrow(); } else { render_logo(); } + return false; } #endif diff --git a/keyboards/aleblazer/zodiark/keymaps/slimoled/keymap.c b/keyboards/aleblazer/zodiark/keymaps/slimoled/keymap.c index 99c5c5e4ee..ca8f91f1df 100644 --- a/keyboards/aleblazer/zodiark/keymaps/slimoled/keymap.c +++ b/keyboards/aleblazer/zodiark/keymaps/slimoled/keymap.c @@ -138,12 +138,13 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return rotation; } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { print_status_narrow(); } else { render_logo(); } + return false; } #endif diff --git a/keyboards/aleblazer/zodiark/keymaps/via/oled.c b/keyboards/aleblazer/zodiark/keymaps/via/oled.c index 5e4959ab2e..8642bacb05 100644 --- a/keyboards/aleblazer/zodiark/keymaps/via/oled.c +++ b/keyboards/aleblazer/zodiark/keymaps/via/oled.c @@ -67,12 +67,13 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return rotation; } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { print_status_narrow(); } else { render_logo(); } + return false; } #endif diff --git a/keyboards/anavi/macropad8/keymaps/default/keymap.c b/keyboards/anavi/macropad8/keymaps/default/keymap.c index 5b69532e1b..84be7f3c68 100644 --- a/keyboards/anavi/macropad8/keymaps/default/keymap.c +++ b/keyboards/anavi/macropad8/keymaps/default/keymap.c @@ -22,7 +22,7 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_180; // flips the display 180 degrees if offhand } -void oled_task_user(void) { +bool oled_task_user(void) { // Host Keyboard Layer Status oled_write_ln_P(PSTR("ANAVI Macro Pad 8"), false); oled_write_P(PSTR("Active layer: "), false); @@ -57,5 +57,6 @@ void oled_task_user(void) { snprintf(rgbStatusLine2, sizeof(rgbStatusLine2), "h:%d s:%d v:%d", rgblight_get_hue(), rgblight_get_sat(), rgblight_get_val()); oled_write_ln(rgbStatusLine2, false); #endif + return false; } #endif diff --git a/keyboards/anavi/macropad8/keymaps/git/keymap.c b/keyboards/anavi/macropad8/keymaps/git/keymap.c index c1f1681ec0..9b7afb5d69 100644 --- a/keyboards/anavi/macropad8/keymaps/git/keymap.c +++ b/keyboards/anavi/macropad8/keymaps/git/keymap.c @@ -105,7 +105,7 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_180; // flips the display 180 degrees if offhand } -void oled_task_user(void) { +bool oled_task_user(void) { // Host Keyboard Layer Status oled_write_ln_P(PSTR("ANAVI Macro Pad 8"), false); oled_write_P(PSTR("Active layer: "), false); @@ -140,5 +140,6 @@ void oled_task_user(void) { snprintf(rgbStatusLine2, sizeof(rgbStatusLine2), "h:%d s:%d v:%d", rgblight_get_hue(), rgblight_get_sat(), rgblight_get_val()); oled_write_ln(rgbStatusLine2, false); #endif + return false; } #endif diff --git a/keyboards/anavi/macropad8/keymaps/kicad/keymap.c b/keyboards/anavi/macropad8/keymaps/kicad/keymap.c index ba47550347..e75d588478 100644 --- a/keyboards/anavi/macropad8/keymaps/kicad/keymap.c +++ b/keyboards/anavi/macropad8/keymaps/kicad/keymap.c @@ -75,7 +75,7 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_180; // flips the display 180 degrees if offhand } -void oled_task_user(void) { +bool oled_task_user(void) { // Host Keyboard Layer Status oled_write_ln_P(PSTR("ANAVI Macro Pad 8"), false); oled_write_P(PSTR("Layer: "), false); @@ -113,5 +113,6 @@ void oled_task_user(void) { snprintf(rgbStatusLine2, sizeof(rgbStatusLine2), "h:%d s:%d v:%d", rgblight_get_hue(), rgblight_get_sat(), rgblight_get_val()); oled_write_ln(rgbStatusLine2, false); #endif + return false; } #endif diff --git a/keyboards/anavi/macropad8/keymaps/kodi/keymap.c b/keyboards/anavi/macropad8/keymaps/kodi/keymap.c index 61cedc8109..f99a22d723 100644 --- a/keyboards/anavi/macropad8/keymaps/kodi/keymap.c +++ b/keyboards/anavi/macropad8/keymaps/kodi/keymap.c @@ -41,7 +41,7 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_180; // flips the display 180 degrees if offhand } -void oled_task_user(void) { +bool oled_task_user(void) { // Host Keyboard Layer Status oled_write_ln_P(PSTR("ANAVI Macro Pad 8"), false); oled_write_P(PSTR("Active layer: "), false); @@ -76,5 +76,6 @@ void oled_task_user(void) { snprintf(rgbStatusLine2, sizeof(rgbStatusLine2), "h:%d s:%d v:%d", rgblight_get_hue(), rgblight_get_sat(), rgblight_get_val()); oled_write_ln(rgbStatusLine2, false); #endif + return false; } #endif diff --git a/keyboards/anavi/macropad8/keymaps/obs/keymap.c b/keyboards/anavi/macropad8/keymaps/obs/keymap.c index e740482bbd..1d9fd38eed 100644 --- a/keyboards/anavi/macropad8/keymaps/obs/keymap.c +++ b/keyboards/anavi/macropad8/keymaps/obs/keymap.c @@ -58,7 +58,7 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_180; // flips the display 180 degrees if offhand } -void oled_task_user(void) { +bool oled_task_user(void) { // Host Keyboard Layer Status oled_write_ln_P(PSTR("ANAVI Macro Pad 8"), false); oled_write_P(PSTR("Active layer: "), false); @@ -93,5 +93,6 @@ void oled_task_user(void) { snprintf(rgbStatusLine2, sizeof(rgbStatusLine2), "h:%d s:%d v:%d", rgblight_get_hue(), rgblight_get_sat(), rgblight_get_val()); oled_write_ln(rgbStatusLine2, false); #endif + return false; } #endif diff --git a/keyboards/anavi/macropad8/keymaps/zoom/keymap.c b/keyboards/anavi/macropad8/keymaps/zoom/keymap.c index ef47102fa5..965bbec429 100644 --- a/keyboards/anavi/macropad8/keymaps/zoom/keymap.c +++ b/keyboards/anavi/macropad8/keymaps/zoom/keymap.c @@ -57,7 +57,7 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_180; // flips the display 180 degrees if offhand } -void oled_task_user(void) { +bool oled_task_user(void) { // Host Keyboard Layer Status oled_write_ln_P(PSTR("ANAVI Macro Pad 8"), false); oled_write_P(PSTR("Active layer: "), false); @@ -92,5 +92,6 @@ void oled_task_user(void) { snprintf(rgbStatusLine2, sizeof(rgbStatusLine2), "h:%d s:%d v:%d", rgblight_get_hue(), rgblight_get_sat(), rgblight_get_val()); oled_write_ln(rgbStatusLine2, false); #endif + return false; } #endif diff --git a/keyboards/angel64/alpha/keymaps/default/keymap.c b/keyboards/angel64/alpha/keymaps/default/keymap.c index 802ff138bb..0f2a8dada1 100644 --- a/keyboards/angel64/alpha/keymaps/default/keymap.c +++ b/keyboards/angel64/alpha/keymaps/default/keymap.c @@ -38,7 +38,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; #ifdef OLED_ENABLE -void oled_task_user(void) { +bool oled_task_user(void) { oled_write_P(PSTR("Layer: "), false); switch (biton32(layer_state)) { case BASE: @@ -56,5 +56,6 @@ void oled_task_user(void) { oled_write_P(IS_HOST_LED_ON(USB_LED_NUM_LOCK) ? PSTR("NUMLCK ") : PSTR(" "), false); oled_write_P(IS_HOST_LED_ON(USB_LED_CAPS_LOCK) ? PSTR("CAPLCK ") : PSTR(" "), false); oled_write_P(IS_HOST_LED_ON(USB_LED_SCROLL_LOCK) ? PSTR("SCRLCK ") : PSTR(" "), false); + return false; } #endif diff --git a/keyboards/angel64/rev1/keymaps/default/keymap.c b/keyboards/angel64/rev1/keymaps/default/keymap.c index ff06e418c1..7ad3964e24 100644 --- a/keyboards/angel64/rev1/keymaps/default/keymap.c +++ b/keyboards/angel64/rev1/keymaps/default/keymap.c @@ -25,10 +25,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; #ifdef OLED_ENABLE -void oled_task_user(void) { +bool oled_task_user(void) { // Host Keyboard LED Status oled_write_P(IS_HOST_LED_ON(USB_LED_NUM_LOCK) ? PSTR("NUMLCK ") : PSTR(" "), false); oled_write_P(IS_HOST_LED_ON(USB_LED_CAPS_LOCK) ? PSTR("CAPLCK ") : PSTR(" "), false); oled_write_P(IS_HOST_LED_ON(USB_LED_SCROLL_LOCK) ? PSTR("SCRLCK ") : PSTR(" "), false); + return false; } #endif diff --git a/keyboards/angel64/rev1/keymaps/kakunpc/keymap.c b/keyboards/angel64/rev1/keymaps/kakunpc/keymap.c index 3780c5e745..6c5184c1b3 100644 --- a/keyboards/angel64/rev1/keymaps/kakunpc/keymap.c +++ b/keyboards/angel64/rev1/keymaps/kakunpc/keymap.c @@ -173,7 +173,7 @@ void matrix_scan_user(void) { } #ifdef OLED_ENABLE -void oled_task_user(void) { +bool oled_task_user(void) { oled_write_P(PSTR("Layer: "), false); switch (biton32(layer_state)) { case BASE: @@ -191,5 +191,6 @@ void oled_task_user(void) { oled_write_P(IS_HOST_LED_ON(USB_LED_NUM_LOCK) ? PSTR("NUMLCK ") : PSTR(" "), false); oled_write_P(IS_HOST_LED_ON(USB_LED_CAPS_LOCK) ? PSTR("CAPLCK ") : PSTR(" "), false); oled_write_P(IS_HOST_LED_ON(USB_LED_SCROLL_LOCK) ? PSTR("SCRLCK ") : PSTR(" "), false); + return false; } #endif diff --git a/keyboards/aplyard/aplx6/rev2/keymaps/default/keymap.c b/keyboards/aplyard/aplx6/rev2/keymaps/default/keymap.c index 5f3ec5b5dd..9c8ac545b2 100644 --- a/keyboards/aplyard/aplx6/rev2/keymaps/default/keymap.c +++ b/keyboards/aplyard/aplx6/rev2/keymaps/default/keymap.c @@ -113,8 +113,9 @@ static void render_logo(void) { } } -void oled_task_user(void) { +bool oled_task_user(void) { render_logo(); + return false; } #endif diff --git a/keyboards/arabica37/keymaps/default/keymap.c b/keyboards/arabica37/keymaps/default/keymap.c index 5a363152d7..47c14379e1 100644 --- a/keyboards/arabica37/keymaps/default/keymap.c +++ b/keyboards/arabica37/keymaps/default/keymap.c @@ -149,7 +149,7 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return rotation; } -void oled_task_user(void) { +bool oled_task_user(void) { void render_status(void) { // Host Keyboard Layer Status oled_write_P(PSTR("Layer: "), false); @@ -177,6 +177,7 @@ void oled_task_user(void) { oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false); oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false); oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false); + return false; } diff --git a/keyboards/arch_36/keymaps/default/keymap.c b/keyboards/arch_36/keymaps/default/keymap.c index 5dff792067..797ca8798f 100644 --- a/keyboards/arch_36/keymaps/default/keymap.c +++ b/keyboards/arch_36/keymaps/default/keymap.c @@ -298,12 +298,13 @@ static void render_logo(void) { oled_write_raw_P(logo, 1024); } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { render_status(); // Renders the current keyboard state (layer, lock, caps, scroll, etc) } else { render_logo(); } + return false; } #endif diff --git a/keyboards/arch_36/keymaps/obosob/keymap.c b/keyboards/arch_36/keymaps/obosob/keymap.c index 00e1a837ba..104ee378f5 100644 --- a/keyboards/arch_36/keymaps/obosob/keymap.c +++ b/keyboards/arch_36/keymaps/obosob/keymap.c @@ -807,12 +807,13 @@ static void render_logo(void) { } } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { render_status(); // Renders the current keyboard state (layer, lock, caps, scroll, etc) } else { render_logo(); } + return false; } #endif diff --git a/keyboards/basekeys/slice/keymaps/default/keymap.c b/keyboards/basekeys/slice/keymaps/default/keymap.c index ad5e9d9ffe..c7fc3fed51 100644 --- a/keyboards/basekeys/slice/keymaps/default/keymap.c +++ b/keyboards/basekeys/slice/keymaps/default/keymap.c @@ -118,7 +118,7 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return isLeftHand ? OLED_ROTATION_180 : OLED_ROTATION_0; } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { // Host Keyboard Layer Status oled_write_P(PSTR("Layer: "), false); @@ -142,5 +142,6 @@ void oled_task_user(void) { } else { oled_write(read_logo(), false); } + return false; } #endif diff --git a/keyboards/basekeys/slice/keymaps/default_split_left_space/keymap.c b/keyboards/basekeys/slice/keymaps/default_split_left_space/keymap.c index 54d41cc382..203bd0804c 100644 --- a/keyboards/basekeys/slice/keymaps/default_split_left_space/keymap.c +++ b/keyboards/basekeys/slice/keymaps/default_split_left_space/keymap.c @@ -118,7 +118,7 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return isLeftHand ? OLED_ROTATION_180 : OLED_ROTATION_0; } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { // Host Keyboard Layer Status oled_write_P(PSTR("Layer: "), false); @@ -142,5 +142,6 @@ void oled_task_user(void) { } else { oled_write(read_logo(), false); } + return false; } #endif diff --git a/keyboards/basekeys/slice/rev1_rgb/keymaps/2moons_rgb/keymap.c b/keyboards/basekeys/slice/rev1_rgb/keymaps/2moons_rgb/keymap.c index 55d914cbc9..375daaca95 100644 --- a/keyboards/basekeys/slice/rev1_rgb/keymaps/2moons_rgb/keymap.c +++ b/keyboards/basekeys/slice/rev1_rgb/keymaps/2moons_rgb/keymap.c @@ -202,7 +202,7 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return isLeftHand ? OLED_ROTATION_180 : OLED_ROTATION_0; } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { // Host Keyboard Layer Status oled_write_P(PSTR("Layer: "), false); @@ -232,5 +232,6 @@ void oled_task_user(void) { } else { oled_write(read_logo(), false); } + return false; } #endif diff --git a/keyboards/basekeys/slice/rev1_rgb/keymaps/via/keymap.c b/keyboards/basekeys/slice/rev1_rgb/keymaps/via/keymap.c index d0893ae862..fa5abd90a5 100644 --- a/keyboards/basekeys/slice/rev1_rgb/keymaps/via/keymap.c +++ b/keyboards/basekeys/slice/rev1_rgb/keymaps/via/keymap.c @@ -99,7 +99,7 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return isLeftHand ? OLED_ROTATION_180 : OLED_ROTATION_0; } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { // Host Keyboard Layer Status oled_write_P(PSTR("Layer: "), false); @@ -123,5 +123,6 @@ void oled_task_user(void) { } else { render_qmk_logo(); } + return false; } #endif diff --git a/keyboards/boardsource/holiday/spooky/keymaps/rip_mx/keymap.c b/keyboards/boardsource/holiday/spooky/keymaps/rip_mx/keymap.c index a9065fdfa2..eb56d11735 100644 --- a/keyboards/boardsource/holiday/spooky/keymaps/rip_mx/keymap.c +++ b/keyboards/boardsource/holiday/spooky/keymaps/rip_mx/keymap.c @@ -71,8 +71,9 @@ static void render_RIP(void) { oled_write_raw_P(my_logo, sizeof(my_logo)); } -void oled_task_user(void) { +bool oled_task_user(void) { render_RIP(); + return false; } #endif diff --git a/keyboards/boardsource/holiday/spooky/keymaps/rip_my_wallet/keymap.c b/keyboards/boardsource/holiday/spooky/keymaps/rip_my_wallet/keymap.c index c50e0b4b3f..f8cac50875 100644 --- a/keyboards/boardsource/holiday/spooky/keymaps/rip_my_wallet/keymap.c +++ b/keyboards/boardsource/holiday/spooky/keymaps/rip_my_wallet/keymap.c @@ -71,8 +71,9 @@ static void render_RIP(void) { oled_write_raw_P(my_logo, sizeof(my_logo)); } -void oled_task_user(void) { +bool oled_task_user(void) { render_RIP(); + return false; } #endif diff --git a/keyboards/boardsource/microdox/keymaps/cole/keymap.c b/keyboards/boardsource/microdox/keymaps/cole/keymap.c index 8ea96e8f91..8ff5707478 100644 --- a/keyboards/boardsource/microdox/keymaps/cole/keymap.c +++ b/keyboards/boardsource/microdox/keymaps/cole/keymap.c @@ -104,13 +104,14 @@ static void render_status(void) { } } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { render_status(); } else { render_logo(); oled_scroll_left(); } + return false; } #endif diff --git a/keyboards/boardsource/microdox/keymaps/via/keymap.c b/keyboards/boardsource/microdox/keymaps/via/keymap.c index 96e0a024f0..e02fb0b6ee 100644 --- a/keyboards/boardsource/microdox/keymaps/via/keymap.c +++ b/keyboards/boardsource/microdox/keymaps/via/keymap.c @@ -92,13 +92,14 @@ static void render_status(void) { } } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { render_status(); } else { render_logo(); oled_scroll_left(); } + return false; } #endif diff --git a/keyboards/boston_meetup/2019/2019.c b/keyboards/boston_meetup/2019/2019.c index 7428f1ccf6..e558048f6a 100644 --- a/keyboards/boston_meetup/2019/2019.c +++ b/keyboards/boston_meetup/2019/2019.c @@ -31,13 +31,12 @@ led_config_t g_led_config = { { #endif #ifdef OLED_ENABLE -__attribute__ ((weak)) -oled_rotation_t oled_init_user(oled_rotation_t rotation) { - return OLED_ROTATION_180; -} +oled_rotation_t oled_init_kb(oled_rotation_t rotation) { return OLED_ROTATION_180; } -__attribute__ ((weak)) -void oled_task_user(void) { +bool oled_task_kb(void) { + if (!oled_task_user()) { + return false; + } oled_write_P(PSTR("BOSTON MK LAYER"), false); oled_advance_char(); oled_write_char(get_highest_layer(layer_state) + 0x30, true); @@ -94,5 +93,6 @@ void oled_task_user(void) { for (uint8_t y = 0; y < 8; y++) { oled_write_pixel(95, 0 + y, true); } + return false; } #endif diff --git a/keyboards/business_card/alpha/keymaps/default/keymap.c b/keyboards/business_card/alpha/keymaps/default/keymap.c index 6bf201655d..64070d23d2 100644 --- a/keyboards/business_card/alpha/keymaps/default/keymap.c +++ b/keyboards/business_card/alpha/keymaps/default/keymap.c @@ -39,5 +39,8 @@ static void render_logo(void) { oled_write_P(qmk_logo, false); } -void oled_task_user(void) { render_logo(); } +bool oled_task_user(void) { + render_logo(); + return false; +} #endif diff --git a/keyboards/business_card/beta/keymaps/default/keymap.c b/keyboards/business_card/beta/keymaps/default/keymap.c index beff48d984..8d2413477e 100644 --- a/keyboards/business_card/beta/keymaps/default/keymap.c +++ b/keyboards/business_card/beta/keymaps/default/keymap.c @@ -38,5 +38,8 @@ static void render_logo(void) { oled_write_P(qmk_logo, false); } -void oled_task_user(void) { render_logo(); } +bool oled_task_user(void) { + render_logo(); + return false; +} #endif diff --git a/keyboards/cannonkeys/satisfaction75/satisfaction_oled.c b/keyboards/cannonkeys/satisfaction75/satisfaction_oled.c index 443482eace..fff8b65bd7 100644 --- a/keyboards/cannonkeys/satisfaction75/satisfaction_oled.c +++ b/keyboards/cannonkeys/satisfaction75/satisfaction_oled.c @@ -5,16 +5,17 @@ void draw_clock(void); #ifdef OLED_ENABLE -__attribute__((weak)) oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_0; } +oled_rotation_t oled_init_kb(oled_rotation_t rotation) { return OLED_ROTATION_0; } -__attribute__((weak)) void oled_task_user(void) { +bool oled_task_kb(void) { + if (!oled_task_user()) { return false; } if (!oled_task_needs_to_repaint()) { - return; + return false; } oled_clear(); if (clock_set_mode) { draw_clock(); - return; + return false;; } switch (oled_mode) { default: @@ -25,6 +26,7 @@ __attribute__((weak)) void oled_task_user(void) { draw_clock(); break; } + return false; } // Request a repaint of the OLED image without resetting the OLED sleep timer. diff --git a/keyboards/cassette42/keymaps/default/keymap.c b/keyboards/cassette42/keymaps/default/keymap.c index b678ccf9b5..4943be9c7b 100644 --- a/keyboards/cassette42/keymaps/default/keymap.c +++ b/keyboards/cassette42/keymaps/default/keymap.c @@ -101,12 +101,13 @@ void render_status(void) { RENDER_LED_STATUS(); } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { render_status(); } else { render_logo(); } + return false; } #endif diff --git a/keyboards/chidori/keymaps/oled_sample/keymap.c b/keyboards/chidori/keymaps/oled_sample/keymap.c index a3bb7c2807..78107a18ec 100644 --- a/keyboards/chidori/keymaps/oled_sample/keymap.c +++ b/keyboards/chidori/keymaps/oled_sample/keymap.c @@ -210,8 +210,9 @@ void oled_write_layer_state(void) { } } -void oled_task_user(void) { +bool oled_task_user(void) { // If you want to change the display of OLED, you need to change here oled_write_layer_state(); + return false; } #endif diff --git a/keyboards/ckeys/washington/keymaps/default/keymap.c b/keyboards/ckeys/washington/keymaps/default/keymap.c index a83a28e955..771905814a 100644 --- a/keyboards/ckeys/washington/keymaps/default/keymap.c +++ b/keyboards/ckeys/washington/keymaps/default/keymap.c @@ -59,7 +59,7 @@ bool encoder_update_user(uint8_t index, bool clockwise) { } #ifdef OLED_ENABLE -void oled_task_user(void) { +bool oled_task_user(void) { // Host Keyboard Layer Status oled_write_P(PSTR("Layer: "), false); switch (biton32(layer_state)) { @@ -79,5 +79,6 @@ void oled_task_user(void) { oled_write_P(IS_LED_ON(usb_led, USB_LED_NUM_LOCK) ? PSTR("NUMLCK ") : PSTR(" "), false); oled_write_P(IS_LED_ON(usb_led, USB_LED_CAPS_LOCK) ? PSTR("CAPLCK ") : PSTR(" "), false); oled_write_P(IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK) ? PSTR("SCRLCK ") : PSTR(" "), false); + return false; } #endif diff --git a/keyboards/claw44/keymaps/oled/keymap.c b/keyboards/claw44/keymaps/oled/keymap.c index 07cb581712..1778ac6167 100644 --- a/keyboards/claw44/keymaps/oled/keymap.c +++ b/keyboards/claw44/keymaps/oled/keymap.c @@ -140,7 +140,7 @@ void set_keylog(uint16_t keycode, keyrecord_t *record) { const char *read_keylog(void) { return keylog_str; } const char *read_keylogs(void) { return keylogs_str; } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { render_layer_state(); oled_write_ln(read_keylog(), false); @@ -148,6 +148,7 @@ void oled_task_user(void) { } else { render_logo(); } + return false; } bool process_record_user(uint16_t keycode, keyrecord_t *record) { diff --git a/keyboards/crkbd/keymaps/armand1m/keymap.c b/keyboards/crkbd/keymaps/armand1m/keymap.c index a37862fad3..3caee1c827 100644 --- a/keyboards/crkbd/keymaps/armand1m/keymap.c +++ b/keyboards/crkbd/keymaps/armand1m/keymap.c @@ -130,7 +130,8 @@ void oled_render_amsterdam_flag(void) { oled_write_raw_P(amsterdam_flag, sizeof(amsterdam_flag)); } -void oled_task_user(void) { +bool oled_task_user(void) { oled_render_amsterdam_flag(); + return false; } #endif // OLED_ENABLE diff --git a/keyboards/crkbd/keymaps/blipson/keymap.c b/keyboards/crkbd/keymaps/blipson/keymap.c index 23491e11a6..ad7664c295 100644 --- a/keyboards/crkbd/keymaps/blipson/keymap.c +++ b/keyboards/crkbd/keymaps/blipson/keymap.c @@ -128,12 +128,13 @@ void oled_render_logo(void) { oled_write_P(crkbd_logo, false); } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { oled_render_layer_state(); } else { oled_render_logo(); } + return false; } #endif // OLED_ENABLE diff --git a/keyboards/crkbd/keymaps/default/keymap.c b/keyboards/crkbd/keymaps/default/keymap.c index 88d40ee407..e06cfa3465 100644 --- a/keyboards/crkbd/keymaps/default/keymap.c +++ b/keyboards/crkbd/keymaps/default/keymap.c @@ -157,13 +157,14 @@ void oled_render_logo(void) { oled_write_P(crkbd_logo, false); } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { oled_render_layer_state(); oled_render_keylog(); } else { oled_render_logo(); } + return false; } bool process_record_user(uint16_t keycode, keyrecord_t *record) { diff --git a/keyboards/crkbd/keymaps/devdev/keymap.c b/keyboards/crkbd/keymaps/devdev/keymap.c index aa4d39a253..a506295749 100644 --- a/keyboards/crkbd/keymaps/devdev/keymap.c +++ b/keyboards/crkbd/keymaps/devdev/keymap.c @@ -392,13 +392,14 @@ void oled_render_logo(void) { oled_write_P(crkbd_logo, false); } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_master) { oled_render_layer_state(); oled_render_keylog(); } else { oled_render_logo(); } + return false; } bool process_record_user(uint16_t keycode, keyrecord_t *record) { diff --git a/keyboards/crkbd/keymaps/dsanchezseco/keymap.c b/keyboards/crkbd/keymaps/dsanchezseco/keymap.c index 11690b0294..6ef428a11f 100644 --- a/keyboards/crkbd/keymaps/dsanchezseco/keymap.c +++ b/keyboards/crkbd/keymaps/dsanchezseco/keymap.c @@ -83,7 +83,7 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { } const char *read_logo(void); -void oled_task_user(void){ +bool oled_task_user(void){ switch (biton32(layer_state)){ case _DVORAK: oled_write_ln_P(PSTR("DVRK"), false); @@ -102,5 +102,6 @@ void oled_task_user(void){ } //now print logo oled_write(read_logo(), false); + return false; } #endif diff --git a/keyboards/crkbd/keymaps/edvorakjp/oled.c b/keyboards/crkbd/keymaps/edvorakjp/oled.c index 3a3748c691..e5ff029565 100644 --- a/keyboards/crkbd/keymaps/edvorakjp/oled.c +++ b/keyboards/crkbd/keymaps/edvorakjp/oled.c @@ -43,7 +43,7 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return is_keyboard_left() ? rotation : rotation ^ OLED_ROTATION_180; } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_left()) { render_mode_icon(!get_enable_kc_lang()); render_layer_state(); @@ -51,5 +51,6 @@ void oled_task_user(void) { } else { render_logo(); } + return false; } #endif // OLED_ENABLE diff --git a/keyboards/crkbd/keymaps/gotham/oled.c b/keyboards/crkbd/keymaps/gotham/oled.c index 4d2c10b60a..baacc86b18 100644 --- a/keyboards/crkbd/keymaps/gotham/oled.c +++ b/keyboards/crkbd/keymaps/gotham/oled.c @@ -246,7 +246,7 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_270; } -void oled_task_user(void) { +bool oled_task_user(void) { if (timer_elapsed(oled_timer) > 10000) { oled_off(); return; @@ -262,4 +262,5 @@ void oled_task_user(void) { } else { render_status_secondary(); } + return false; } diff --git a/keyboards/crkbd/keymaps/kidbrazil/keymap.c b/keyboards/crkbd/keymaps/kidbrazil/keymap.c index 7cb08f40d5..219db22433 100644 --- a/keyboards/crkbd/keymaps/kidbrazil/keymap.c +++ b/keyboards/crkbd/keymaps/kidbrazil/keymap.c @@ -172,7 +172,7 @@ void render_slave_oled(void) { } // {OLED Task} -----------------------------------------------// -void oled_task_user(void) { +bool oled_task_user(void) { // First time out switches to logo as first indication of iddle. if (timer_elapsed32(oled_timer) > 100000 && timer_elapsed32(oled_timer) < 479999) { // Render logo on both halves before full timeout @@ -209,5 +209,6 @@ void oled_task_user(void) { } } } + return false; } #endif diff --git a/keyboards/crkbd/keymaps/mcrown/oled.c b/keyboards/crkbd/keymaps/mcrown/oled.c index b728a5806e..9623b921a7 100644 --- a/keyboards/crkbd/keymaps/mcrown/oled.c +++ b/keyboards/crkbd/keymaps/mcrown/oled.c @@ -308,7 +308,7 @@ static void render_logo(void){ * @param void. * @return void. */ -void oled_task_user(void){ +bool oled_task_user(void){ if (timer_elapsed32(standby_oled_timer) > 15000){ oled_off(); }else{ @@ -321,6 +321,7 @@ void oled_task_user(void){ oled_scroll_left(); } } + return false; } /** @brief process the current key and add it to the keylog string. diff --git a/keyboards/crkbd/keymaps/oled_sample/keymap.c b/keyboards/crkbd/keymaps/oled_sample/keymap.c index 14b4535855..9daae9607d 100644 --- a/keyboards/crkbd/keymaps/oled_sample/keymap.c +++ b/keyboards/crkbd/keymaps/oled_sample/keymap.c @@ -190,13 +190,14 @@ void render_status_main(void) { render_keylogger_status(); } -void oled_task_user(void) { +bool oled_task_user(void) { update_log(); if (is_keyboard_master()) { render_status_main(); // Renders the current keyboard state (layer, lock, caps, scroll, etc) } else { render_crkbd_logo(); } + return false; } bool process_record_user(uint16_t keycode, keyrecord_t *record) { diff --git a/keyboards/crkbd/keymaps/oo/keymap.c b/keyboards/crkbd/keymaps/oo/keymap.c index c0416d9726..bcc296c8b6 100644 --- a/keyboards/crkbd/keymaps/oo/keymap.c +++ b/keyboards/crkbd/keymaps/oo/keymap.c @@ -148,13 +148,14 @@ void oled_render_logo(void) { oled_write_P(crkbd_logo, false); } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { oled_render_layer_state(); oled_render_keylog(); } else { oled_render_logo(); } + return false; } bool process_record_user(uint16_t keycode, keyrecord_t *record) { diff --git a/keyboards/crkbd/keymaps/rarick/keymap.c b/keyboards/crkbd/keymaps/rarick/keymap.c index b11bac1e72..adf9555421 100644 --- a/keyboards/crkbd/keymaps/rarick/keymap.c +++ b/keyboards/crkbd/keymaps/rarick/keymap.c @@ -158,13 +158,14 @@ void oled_render_logo(void) { oled_write_P(crkbd_logo, false); } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { oled_render_layer_state(); oled_render_keylog(); } else { oled_render_logo(); } + return false; } bool process_record_user(uint16_t keycode, keyrecord_t *record) { diff --git a/keyboards/crkbd/keymaps/rjhilgefort/keymap.c b/keyboards/crkbd/keymaps/rjhilgefort/keymap.c index 7ca234a0ee..a753b2b872 100644 --- a/keyboards/crkbd/keymaps/rjhilgefort/keymap.c +++ b/keyboards/crkbd/keymaps/rjhilgefort/keymap.c @@ -204,13 +204,14 @@ void oled_render_logo(void) { oled_write_P(crkbd_logo, false); } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { oled_render_layer_state(); oled_render_keylog(); } else { oled_render_logo(); } + return false; } bool process_record_user(uint16_t keycode, keyrecord_t *record) { diff --git a/keyboards/crkbd/keymaps/rpbaptist/keymap.c b/keyboards/crkbd/keymaps/rpbaptist/keymap.c index d632e255d5..a098c73d2c 100644 --- a/keyboards/crkbd/keymaps/rpbaptist/keymap.c +++ b/keyboards/crkbd/keymaps/rpbaptist/keymap.c @@ -290,7 +290,7 @@ void render_status(void) { # endif } -void oled_task_user(void) { +bool oled_task_user(void) { if (timer_elapsed32(oled_timer) > OLED_TIMEOUT) { oled_off(); return; @@ -310,6 +310,7 @@ void oled_task_user(void) { } #endif } + return false; } #endif diff --git a/keyboards/crkbd/keymaps/soundmonster/keymap.c b/keyboards/crkbd/keymaps/soundmonster/keymap.c index 67cfa78f92..98afe3685f 100644 --- a/keyboards/crkbd/keymaps/soundmonster/keymap.c +++ b/keyboards/crkbd/keymaps/soundmonster/keymap.c @@ -300,7 +300,7 @@ void suspend_power_down_user() { oled_off(); } -void oled_task_user(void) { +bool oled_task_user(void) { if (timer_elapsed32(oled_timer) > 30000) { oled_off(); return; @@ -314,6 +314,7 @@ void oled_task_user(void) { } else { render_status_secondary(); } + return false; } #endif diff --git a/keyboards/crkbd/keymaps/sulrich/keymap.c b/keyboards/crkbd/keymaps/sulrich/keymap.c index f1cd60c526..84668b53c8 100644 --- a/keyboards/crkbd/keymaps/sulrich/keymap.c +++ b/keyboards/crkbd/keymaps/sulrich/keymap.c @@ -137,13 +137,14 @@ void oled_render_logo(void) { oled_write_P(crkbd_logo, false); } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { oled_render_layer_state(); oled_render_keylog(); } else { oled_render_logo(); } + return false; } bool process_record_user(uint16_t keycode, keyrecord_t *record) { @@ -153,4 +154,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { return true; } #endif // OLED_ENABLE - diff --git a/keyboards/crkbd/keymaps/vayashiko/keymap.c b/keyboards/crkbd/keymaps/vayashiko/keymap.c index a1a8f7e9f5..ecb629f30d 100644 --- a/keyboards/crkbd/keymaps/vayashiko/keymap.c +++ b/keyboards/crkbd/keymaps/vayashiko/keymap.c @@ -164,13 +164,14 @@ void oled_render_logo(void) { oled_write_P(crkbd_logo, false); } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_master) { oled_render_layer_state(); oled_render_keylog(); } else { oled_render_logo(); } + return false; } bool process_record_user(uint16_t keycode, keyrecord_t *record) { diff --git a/keyboards/crkbd/keymaps/via/keymap.c b/keyboards/crkbd/keymaps/via/keymap.c index cbaeb93f6d..12c86f6bbc 100644 --- a/keyboards/crkbd/keymaps/via/keymap.c +++ b/keyboards/crkbd/keymaps/via/keymap.c @@ -158,13 +158,14 @@ void oled_render_logo(void) { oled_write_P(crkbd_logo, false); } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { oled_render_layer_state(); oled_render_keylog(); } else { oled_render_logo(); } + return false; } bool process_record_user(uint16_t keycode, keyrecord_t *record) { diff --git a/keyboards/crkbd/keymaps/xyverz/keymap.c b/keyboards/crkbd/keymaps/xyverz/keymap.c index d99d9d6baf..0b7fc0a0ac 100644 --- a/keyboards/crkbd/keymaps/xyverz/keymap.c +++ b/keyboards/crkbd/keymaps/xyverz/keymap.c @@ -187,13 +187,14 @@ void oled_render_logo(void) { oled_write_P(crkbd_logo, false); } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { oled_render_layer_state(); oled_render_keylog(); } else { oled_render_logo(); } + return false; } bool process_record_user(uint16_t keycode, keyrecord_t *record) { diff --git a/keyboards/dekunukem/duckypad/keymaps/default/keymap.c b/keyboards/dekunukem/duckypad/keymaps/default/keymap.c index a87caa2cdd..3b74640fe6 100644 --- a/keyboards/dekunukem/duckypad/keymaps/default/keymap.c +++ b/keyboards/dekunukem/duckypad/keymaps/default/keymap.c @@ -125,7 +125,7 @@ char* make_rgb_text(void){ return s; }; -void oled_task_user(void) { +bool oled_task_user(void) { render_logo(); oled_set_cursor(0,3); if (rgbToggled) { @@ -137,6 +137,7 @@ void oled_task_user(void) { oled_write_ln_P(s, false); free(s); } + return false; } bool process_record_user(uint16_t keycode, keyrecord_t *record) { diff --git a/keyboards/dekunukem/duckypad/keymaps/m4cs/keymap.c b/keyboards/dekunukem/duckypad/keymaps/m4cs/keymap.c index 80b188a480..cd8a314739 100644 --- a/keyboards/dekunukem/duckypad/keymaps/m4cs/keymap.c +++ b/keyboards/dekunukem/duckypad/keymaps/m4cs/keymap.c @@ -203,7 +203,7 @@ char* make_sys_info_text(void) { }; -void oled_task_user(void) { +bool oled_task_user(void) { if (!sysToggled) { render_logo(); oled_set_cursor(0,3); @@ -221,6 +221,7 @@ void oled_task_user(void) { free(s); } } + return false; }; int concat(int a, int b) { diff --git a/keyboards/dekunukem/duckypad/keymaps/via/keymap.c b/keyboards/dekunukem/duckypad/keymaps/via/keymap.c index 5d11b6d6c8..01baaeb593 100644 --- a/keyboards/dekunukem/duckypad/keymaps/via/keymap.c +++ b/keyboards/dekunukem/duckypad/keymaps/via/keymap.c @@ -67,7 +67,7 @@ static void render_logo(void) { oled_write_raw_P(ducky_logo, LOGO_SIZE); } -void oled_task_user(void) { +bool oled_task_user(void) { render_logo(); + return false; } - diff --git a/keyboards/dmqdesign/spin/keymaps/gorbachev/keymap.c b/keyboards/dmqdesign/spin/keymaps/gorbachev/keymap.c index 181de5621c..b41359c5b6 100644 --- a/keyboards/dmqdesign/spin/keymaps/gorbachev/keymap.c +++ b/keyboards/dmqdesign/spin/keymaps/gorbachev/keymap.c @@ -220,7 +220,7 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { #endif } -void oled_task_user(void) { +bool oled_task_user(void) { // Host Keyboard Layer Status oled_write_P(PSTR("Layer: "), false); @@ -244,5 +244,6 @@ void oled_task_user(void) { oled_write_P(PSTR("Mode: "), false); oled_write_ln(rgb_mode_name, false); + return false; } #endif diff --git a/keyboards/doodboard/duckboard/keymaps/default/keymap.c b/keyboards/doodboard/duckboard/keymaps/default/keymap.c index e25280ff6a..b4e6207aea 100644 --- a/keyboards/doodboard/duckboard/keymaps/default/keymap.c +++ b/keyboards/doodboard/duckboard/keymaps/default/keymap.c @@ -89,7 +89,7 @@ static void render_anim(void) { } } -void oled_task_user(void) { +bool oled_task_user(void) { render_anim(); oled_set_cursor(0,6); oled_write_P(PSTR("DUCK\nBOARD\n"), false); @@ -109,6 +109,7 @@ void oled_task_user(void) { oled_write_P(PSTR("RGB\n"), false); break; } + return false; } #endif diff --git a/keyboards/doodboard/duckboard_r2/keymaps/default/keymap.c b/keyboards/doodboard/duckboard_r2/keymaps/default/keymap.c index ea603cdb22..af6e469ab2 100644 --- a/keyboards/doodboard/duckboard_r2/keymaps/default/keymap.c +++ b/keyboards/doodboard/duckboard_r2/keymaps/default/keymap.c @@ -89,7 +89,7 @@ static void render_anim(void) { } } -void oled_task_user(void) { +bool oled_task_user(void) { render_anim(); oled_set_cursor(0,6); oled_write_P(PSTR("DUCK\nBOARD\n"), false); @@ -109,6 +109,7 @@ void oled_task_user(void) { oled_write_P(PSTR("RGB\n"), false); break; } + return false; } #endif diff --git a/keyboards/doodboard/duckboard_r2/keymaps/via/keymap.c b/keyboards/doodboard/duckboard_r2/keymaps/via/keymap.c index 9afc121859..7911d9e3cc 100644 --- a/keyboards/doodboard/duckboard_r2/keymaps/via/keymap.c +++ b/keyboards/doodboard/duckboard_r2/keymaps/via/keymap.c @@ -96,7 +96,7 @@ static void render_anim(void) { } } -void oled_task_user(void) { +bool oled_task_user(void) { render_anim(); oled_set_cursor(0,6); oled_write_P(PSTR("DUCK\nBOARD\n"), false); @@ -119,6 +119,7 @@ void oled_task_user(void) { oled_write_P(PSTR("FN2\n"), false); break; } + return false; } #endif diff --git a/keyboards/draculad/keymaps/default/keymap.c b/keyboards/draculad/keymaps/default/keymap.c index 657ef2048d..a352359d13 100644 --- a/keyboards/draculad/keymaps/default/keymap.c +++ b/keyboards/draculad/keymaps/default/keymap.c @@ -186,12 +186,13 @@ static void render_status(void) { } } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { render_status(); // Renders the current keyboard state (layer, lock, caps, scroll, etc) } else { render_logo(); } + return false; } #endif diff --git a/keyboards/draculad/keymaps/pimoroni/keymap.c b/keyboards/draculad/keymaps/pimoroni/keymap.c index c7b6cd35d5..b70184dbc8 100644 --- a/keyboards/draculad/keymaps/pimoroni/keymap.c +++ b/keyboards/draculad/keymaps/pimoroni/keymap.c @@ -200,12 +200,13 @@ static void render_status(void) { } } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { render_status(); // Renders the current keyboard state (layer, lock, caps, scroll, etc) } else { render_logo(); } + return false; } #endif diff --git a/keyboards/dumbo/keymaps/default/keymap.c b/keyboards/dumbo/keymaps/default/keymap.c index f3ee895210..7fc3ffc2c4 100644 --- a/keyboards/dumbo/keymaps/default/keymap.c +++ b/keyboards/dumbo/keymaps/default/keymap.c @@ -179,12 +179,13 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return rotation; } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { print_status_narrow(); } else { render_logo(); } + return false; } #endif diff --git a/keyboards/dumbo/keymaps/trip-trap/keymap.c b/keyboards/dumbo/keymaps/trip-trap/keymap.c index fc1092ca6d..73042f5f5e 100644 --- a/keyboards/dumbo/keymaps/trip-trap/keymap.c +++ b/keyboards/dumbo/keymaps/trip-trap/keymap.c @@ -375,7 +375,7 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return rotation; } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { print_status_narrow(); sprintf(wpm_str, "%03d", get_current_wpm()); @@ -383,6 +383,7 @@ void oled_task_user(void) { } else { render_anim(); } + return false; } #endif diff --git a/keyboards/ein_60/ein_60.c b/keyboards/ein_60/ein_60.c index e9431edefb..d15ad0cd52 100644 --- a/keyboards/ein_60/ein_60.c +++ b/keyboards/ein_60/ein_60.c @@ -56,7 +56,8 @@ const uint8_t music_map[MATRIX_ROWS][MATRIX_COLS] = LAYOUT( #endif #ifdef OLED_ENABLE -__attribute__((weak)) void oled_task_user(void) { +bool oled_task_kb(void) { + if (!oled_task_user()) { return false; } // Host Keyboard Layer Status oled_write_P(PSTR("Layer: "), false); switch (get_highest_layer(layer_state)) { @@ -95,7 +96,9 @@ __attribute__((weak)) void oled_task_user(void) { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,255,255, 4,253,197,197,197,197,197,197,197,197,197,197,199,192,192, 0,255,255, 0,255, 0,255,255, 0,254, 13, 27, 55,111,222,188,120,255, 0,255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,255,255, 0,255,197,197,197,197,197,197,197,197,197,197,253,253,255,131,254, 0, 0,255,255, 0,255,184,220,238,247,219,205,198,195,193,192,255,255,255,128,255, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 3, 3, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 3, 0, 3, 3, 2, 3, 0, 3, 3, 2, 3, 0, 0, 0, 0, 0, 1, 3, 2, 2, 3, 0, 8, 28, 20, 20, 20, 20, 20, 28, 8, 0, 1, 3, 3, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 3, 0, 0, 0, 1, 3, 3, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 3, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, }; + oled_write_raw_P(ein60_logo, sizeof(ein60_logo)); + return false; } #endif diff --git a/keyboards/ein_60/keymaps/default/keymap.c b/keyboards/ein_60/keymaps/default/keymap.c index 3984dabcbf..24a705106c 100644 --- a/keyboards/ein_60/keymaps/default/keymap.c +++ b/keyboards/ein_60/keymaps/default/keymap.c @@ -167,11 +167,12 @@ static void render_status(void) { oled_set_cursor(1,2); } -void oled_task_user(void) { +bool oled_task_user(void) { render_status(); oled_write_ln_P(PSTR(""), false); render_ein60_logo(); + return false; } #endif diff --git a/keyboards/ein_60/keymaps/klackygears/keymap.c b/keyboards/ein_60/keymaps/klackygears/keymap.c index ea1d77dea7..be3c30b97d 100644 --- a/keyboards/ein_60/keymaps/klackygears/keymap.c +++ b/keyboards/ein_60/keymaps/klackygears/keymap.c @@ -104,7 +104,7 @@ static void render_ein60_logo(void) { static void render_status(void) { -//void oled_task_user(void) { +//bool oled_task_user(void) { // Host Keyboard Layer Status oled_write_P(PSTR("Layer: "), false); @@ -145,12 +145,13 @@ static void render_status(void) { } -void oled_task_user(void) { +bool oled_task_user(void) { render_status(); oled_write_ln_P(PSTR(""), false); render_ein60_logo(); + return false; } #endif @@ -172,5 +173,3 @@ bool encoder_update_user(uint8_t index, bool clockwise) { } return true; } - - diff --git a/keyboards/ein_60/keymaps/ledtest/keymap.c b/keyboards/ein_60/keymaps/ledtest/keymap.c index 6f903124af..5fb5217c98 100644 --- a/keyboards/ein_60/keymaps/ledtest/keymap.c +++ b/keyboards/ein_60/keymaps/ledtest/keymap.c @@ -166,11 +166,13 @@ static void render_status(void) { oled_set_cursor(1,2); } -void oled_task_user(void) { +bool oled_task_user(void) { render_status(); oled_write_ln_P(PSTR(""), false); render_ein60_logo(); + + return false; } #endif diff --git a/keyboards/gergo/keymaps/oled/keymap.c b/keyboards/gergo/keymaps/oled/keymap.c index 7e19a799ee..ab374b9332 100644 --- a/keyboards/gergo/keymaps/oled/keymap.c +++ b/keyboards/gergo/keymaps/oled/keymap.c @@ -130,13 +130,14 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_180; } -void oled_task_user(void) { +bool oled_task_user(void) { static const char PROGMEM font_logo[] = { 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,0}; oled_write_P(font_logo, false); + return false; } //for (int i = 0; i < fontLen; i++) { //oled_write_char(pgm_read_byte(lain+i), false); diff --git a/keyboards/getta25/keymaps/oled/keymap.c b/keyboards/getta25/keymaps/oled/keymap.c index 4fbaf3ec28..7d8151b86d 100644 --- a/keyboards/getta25/keymaps/oled/keymap.c +++ b/keyboards/getta25/keymaps/oled/keymap.c @@ -182,7 +182,7 @@ void render_status(void) { render_keylock_status(host_keyboard_led_state()); } -void oled_task_user(void) { +bool oled_task_user(void) { static const char PROGMEM font_logo[] = { 0x80,0x81,0x82,0x83,0x84, 0xa0,0xa1,0xa2,0xa3,0xa4, @@ -199,6 +199,7 @@ void oled_task_user(void) { oled_write_P(font_logo, false); render_status(); // Renders the current keyboard state (layer, lock) + return false; } #endif diff --git a/keyboards/hadron/ver2/ver2.c b/keyboards/hadron/ver2/ver2.c index ca13427497..abf21d4256 100644 --- a/keyboards/hadron/ver2/ver2.c +++ b/keyboards/hadron/ver2/ver2.c @@ -1,13 +1,12 @@ #include "ver2.h" #ifdef OLED_ENABLE -__attribute__ ((weak)) -oled_rotation_t oled_init_user(oled_rotation_t rotation) { - return OLED_ROTATION_180; -} +oled_rotation_t oled_init_kb(oled_rotation_t rotation) { return OLED_ROTATION_180; } -__attribute__ ((weak)) -void oled_task_user(void) { +bool oled_task_kb(void) { + if (!oled_task_user()) { + return false; + } oled_write_P(PSTR("LAYER "), false); oled_write_char(get_highest_layer(layer_state) + 0x30, true); @@ -61,5 +60,6 @@ void oled_task_user(void) { for (uint8_t y = 0; y < 8; y++) { oled_write_pixel(35, 0 + y, true); } + return false; } #endif diff --git a/keyboards/hadron/ver3/ver3.c b/keyboards/hadron/ver3/ver3.c index 40bc57c20e..4c5a2e0c9a 100644 --- a/keyboards/hadron/ver3/ver3.c +++ b/keyboards/hadron/ver3/ver3.c @@ -34,13 +34,12 @@ led_config_t g_led_config = { { #endif #ifdef OLED_ENABLE -__attribute__ ((weak)) -oled_rotation_t oled_init_user(oled_rotation_t rotation) { - return OLED_ROTATION_180; -} +oled_rotation_t oled_init_kb(oled_rotation_t rotation) { return OLED_ROTATION_180; } -__attribute__ ((weak)) -void oled_task_user(void) { +bool oled_task_kb(void) { + if (!oled_task_user()) { + return false; + } oled_write_P(PSTR("LAYER"), false); oled_advance_char(); oled_write_char(get_highest_layer(layer_state) + 0x30, true); @@ -94,5 +93,6 @@ void oled_task_user(void) { for (uint8_t y = 0; y < 8; y++) { oled_write_pixel(35, 0 + y, true); } + return false; } #endif diff --git a/keyboards/halfcliff/halfcliff.c b/keyboards/halfcliff/halfcliff.c index 4e2910b846..9e3f64d284 100644 --- a/keyboards/halfcliff/halfcliff.c +++ b/keyboards/halfcliff/halfcliff.c @@ -27,14 +27,18 @@ enum layer_names { /* _FN */ }; -__attribute__((weak)) oled_rotation_t oled_init_user(oled_rotation_t rotation) { +oled_rotation_t oled_init_kb(oled_rotation_t rotation) { if (!is_keyboard_master()) { return OLED_ROTATION_180; // flips the display 180 degrees if offhand } return rotation; } +oled_rotation_t oled_init_kb(oled_rotation_t rotation) { return OLED_ROTATION_180; } -__attribute__((weak)) void oled_task_user(void) { +bool oled_task_kb(void) { + if (!oled_task_user()) { + return false; + } if (!is_keyboard_master()) { static const char PROGMEM qmk_logo[] = { 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F, 0x90, 0x91, 0x92, 0x93, 0x94, @@ -68,6 +72,7 @@ __attribute__((weak)) void oled_task_user(void) { oled_write_P(led_state.caps_lock ? PSTR("CAPLCK ") : PSTR(" "), false); oled_write_P(led_state.scroll_lock ? PSTR("SCRLCK\n") : PSTR(" \n"), false); } + return false; } #endif diff --git a/keyboards/handwired/amigopunk/keymaps/default/keymap.c b/keyboards/handwired/amigopunk/keymaps/default/keymap.c index b7df62979a..3a64958fad 100644 --- a/keyboards/handwired/amigopunk/keymaps/default/keymap.c +++ b/keyboards/handwired/amigopunk/keymaps/default/keymap.c @@ -85,8 +85,9 @@ static void render_amigopunk_logo(void) { }; oled_write_raw_P(amigopunk_logo, sizeof(amigopunk_logo)); } -void oled_task_user(void) { +bool oled_task_user(void) { render_amigopunk_logo(); /* oled_write_P(PSTR("Amigo Punk\n"), false); */ + return false; } #endif diff --git a/keyboards/handwired/d48/keymaps/anderson/keymap.c b/keyboards/handwired/d48/keymaps/anderson/keymap.c index 0699780718..11bc62e537 100644 --- a/keyboards/handwired/d48/keymaps/anderson/keymap.c +++ b/keyboards/handwired/d48/keymaps/anderson/keymap.c @@ -251,7 +251,7 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_0; } -void oled_task_user(void) { +bool oled_task_user(void) { /* Host Keyboard Layer Status */ uint8_t current_layer = get_highest_layer(layer_state); @@ -337,5 +337,6 @@ void oled_task_user(void) { } } + return false; } #endif diff --git a/keyboards/handwired/d48/keymaps/default/keymap.c b/keyboards/handwired/d48/keymaps/default/keymap.c index 66b8dd714f..4c3925c7ed 100644 --- a/keyboards/handwired/d48/keymaps/default/keymap.c +++ b/keyboards/handwired/d48/keymaps/default/keymap.c @@ -196,7 +196,7 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_0; } -void oled_task_user(void) { +bool oled_task_user(void) { /* Host Keyboard Layer Status */ uint8_t current_layer = get_highest_layer(layer_state); @@ -282,5 +282,6 @@ void oled_task_user(void) { } } + return false; } #endif diff --git a/keyboards/handwired/dactyl_manuform/5x6_5/keymaps/333fred/keymap.c b/keyboards/handwired/dactyl_manuform/5x6_5/keymaps/333fred/keymap.c index fd8c16420e..1e164081f2 100644 --- a/keyboards/handwired/dactyl_manuform/5x6_5/keymaps/333fred/keymap.c +++ b/keyboards/handwired/dactyl_manuform/5x6_5/keymaps/333fred/keymap.c @@ -115,7 +115,7 @@ void write_quote(const char* data, const uint8_t num_lines) { } } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { render_logo(); oled_advance_page(/* clearPageRemainder */ true); @@ -559,6 +559,7 @@ void oled_task_user(void) { break; } } + return false; } bool encoder_update_user(uint8_t index, bool clockwise) { diff --git a/keyboards/handwired/marauder/keymaps/orvia/keymap.c b/keyboards/handwired/marauder/keymaps/orvia/keymap.c index 87a0a93cc7..987e748128 100644 --- a/keyboards/handwired/marauder/keymaps/orvia/keymap.c +++ b/keyboards/handwired/marauder/keymaps/orvia/keymap.c @@ -156,7 +156,7 @@ static void render_anim(void) { } // Used to draw on to the oled screen -void oled_task_user(void) { +bool oled_task_user(void) { render_anim(); // renders pixelart oled_set_cursor(0, 0); // sets cursor to (row, column) using charactar spacing (4 rows, 21 full columns on a 128x32 screen, anything more will overflow back to the top) @@ -194,5 +194,6 @@ void oled_task_user(void) { } oled_set_cursor(17, 3); oled_write_P(PSTR("NKRO"), keymap_config.nkro); + return false; } #endif diff --git a/keyboards/handwired/myskeeb/oled.c b/keyboards/handwired/myskeeb/oled.c index ee6aa86556..081ca8395a 100644 --- a/keyboards/handwired/myskeeb/oled.c +++ b/keyboards/handwired/myskeeb/oled.c @@ -1,108 +1,108 @@ // [OLED Configuration] ---------------------------------------------// // Draw - static const char PROGMEM skeeb_logo[] = { + static const char PROGMEM skeeb_logo[] = { 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, 0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4, 0x95,0x96,0x97,0x98,0x99,0x9a,0x9b,0xb5,0xb6,0xb7,0xb8,0xb9,0xba,0xbb,0xd5,0xd6,0xd7,0xd8,0xd9,0xda,0xdb,0}; - static const char PROGMEM oled_header[] = { + static const char PROGMEM oled_header[] = { 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94, 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4, 0xc0,0}; - - static const char PROGMEM oled_layer_keylog_separator[] = { + + static const char PROGMEM oled_layer_keylog_separator[] = { 0xc8,0xff,0}; - - static const char PROGMEM oled_layer_line_end[] = { + + static const char PROGMEM oled_layer_line_end[] = { 0xd4,0}; - - static const char PROGMEM oled_layer_keylog_bottom[] = { + + static const char PROGMEM oled_layer_keylog_bottom[] = { 0xc1,0xc7,0xc7,0xc7,0xc7,0xc7,0xc7,0xc7,0xc7,0xc3,0xc7,0xc7,0xc7,0xc7,0xc7,0xc7,0xc7,0xc7,0xc7,0xc7,0xc2,0}; - - static const char PROGMEM oled_line_start[] = { + + static const char PROGMEM oled_line_start[] = { 0xc0,0}; - - static const char PROGMEM oled_mods_bottom[] = { + + static const char PROGMEM oled_mods_bottom[] = { 0xc1,0xc7,0xc7,0xc7,0xc7,0xc7,0xc7,0xc7,0xc7,0xc7,0xc7,0xc7,0xc7,0xc7,0xc7,0xc7,0xc7,0xc7,0xc7,0xc7,0xc2,0}; - - static const char PROGMEM oled_footer[] = { + + static const char PROGMEM oled_footer[] = { 0xc4,0xc5,0xc5,0xc9,0xca,0xca,0xca,0xca,0xca,0xca,0xca,0xca,0xca,0xca,0xca,0xca,0xca,0xcb,0xc5,0xc5,0xc6,0}; void render_skeeb_logo(void) { static const char PROGMEM skeeb_logo[] = { -0x00, 0xc0, 0x20, 0x10, 0x08, 0x04, 0x02, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x03, -0x07, 0x0f, 0x1f, 0x3f, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, -0xff, 0xff, 0xff, 0x81, 0x81, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x19, 0x19, 0xff, 0xff, 0x01, -0x01, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x19, 0x19, 0x99, 0x99, 0x99, -0x99, 0x99, 0x99, 0x01, 0x01, 0xff, 0xff, 0x81, 0x81, 0x7f, 0x7f, 0xff, 0xff, 0x7f, 0x7f, 0x81, -0x81, 0xff, 0xff, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0xf9, 0xf9, 0xff, 0xff, 0xff, -0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f, 0x3f, 0x1f, 0x0f, 0x07, -0x03, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0xc0, 0x00, -0x00, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x03, 0x07, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, -0x0f, 0x0f, 0x0f, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x08, 0x08, 0x0f, 0x0f, 0x08, -0x08, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x0f, 0x0f, 0x08, 0x08, 0x0f, 0x0f, 0x0f, -0x0f, 0x0f, 0x0f, 0x08, 0x08, 0x0f, 0x0f, 0x0f, 0x0f, 0x0e, 0x0e, 0x09, 0x09, 0x0e, 0x0e, 0x0f, -0x0f, 0x0f, 0x0f, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x0f, 0x0f, 0x0f, -0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x07, 0x03, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, -0x00, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x40, 0x40, 0x20, 0x20, 0x10, 0x10, 0x10, -0x10, 0x10, 0x20, 0x20, 0x40, 0x40, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, -0x00, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x01, 0x00, 0xe0, 0x20, 0x20, 0xe0, 0x00, 0x00, 0x00, -0x00, 0x00, 0xe0, 0x20, 0x20, 0xe0, 0x00, 0x01, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, -0x00, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0xe0, 0x20, 0x20, 0x20, 0x20, 0x20, 0x3f, 0x00, 0x00, 0xf9, 0x01, 0x01, 0xf9, 0x00, 0x00, 0xf8, -0x00, 0x00, 0xf9, 0x01, 0x01, 0xf9, 0x00, 0x00, 0x3f, 0x20, 0x20, 0x20, 0x20, 0x20, 0xe0, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, -0x00, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0xff, 0x00, 0x00, 0xfc, 0x00, 0x00, 0xff, 0x01, 0x01, 0xf1, 0x10, 0x10, 0x1f, 0x00, 0x00, 0x3f, -0x00, 0x00, 0x1f, 0x10, 0x10, 0xf3, 0x02, 0x02, 0xf2, 0x12, 0x12, 0x1e, 0x00, 0x00, 0xff, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, -0x00, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x0f, 0x00, 0x00, 0x0f, 0x08, 0x08, 0x0f, 0x00, 0x00, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x0f, -0x00, 0x00, 0x0f, 0x01, 0x01, 0x09, 0x08, 0x08, 0x09, 0x09, 0x09, 0x0f, 0x00, 0x00, 0x0f, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, -0x00, 0x03, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0xc0, 0xe0, -0xf0, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, -0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, -0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, -0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, -0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, -0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf0, +0x00, 0xc0, 0x20, 0x10, 0x08, 0x04, 0x02, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x03, +0x07, 0x0f, 0x1f, 0x3f, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, +0xff, 0xff, 0xff, 0x81, 0x81, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x19, 0x19, 0xff, 0xff, 0x01, +0x01, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x19, 0x19, 0x99, 0x99, 0x99, +0x99, 0x99, 0x99, 0x01, 0x01, 0xff, 0xff, 0x81, 0x81, 0x7f, 0x7f, 0xff, 0xff, 0x7f, 0x7f, 0x81, +0x81, 0xff, 0xff, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, 0xf9, 0xf9, 0xff, 0xff, 0xff, +0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f, 0x3f, 0x1f, 0x0f, 0x07, +0x03, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0xc0, 0x00, +0x00, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x03, 0x07, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, +0x0f, 0x0f, 0x0f, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x08, 0x08, 0x0f, 0x0f, 0x08, +0x08, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x0f, 0x0f, 0x08, 0x08, 0x0f, 0x0f, 0x0f, +0x0f, 0x0f, 0x0f, 0x08, 0x08, 0x0f, 0x0f, 0x0f, 0x0f, 0x0e, 0x0e, 0x09, 0x09, 0x0e, 0x0e, 0x0f, +0x0f, 0x0f, 0x0f, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x0f, 0x0f, 0x0f, +0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x0f, 0x07, 0x03, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, +0x00, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x40, 0x40, 0x20, 0x20, 0x10, 0x10, 0x10, +0x10, 0x10, 0x20, 0x20, 0x40, 0x40, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, +0x00, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x01, 0x00, 0xe0, 0x20, 0x20, 0xe0, 0x00, 0x00, 0x00, +0x00, 0x00, 0xe0, 0x20, 0x20, 0xe0, 0x00, 0x01, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, +0x00, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0xe0, 0x20, 0x20, 0x20, 0x20, 0x20, 0x3f, 0x00, 0x00, 0xf9, 0x01, 0x01, 0xf9, 0x00, 0x00, 0xf8, +0x00, 0x00, 0xf9, 0x01, 0x01, 0xf9, 0x00, 0x00, 0x3f, 0x20, 0x20, 0x20, 0x20, 0x20, 0xe0, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, +0x00, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0xff, 0x00, 0x00, 0xfc, 0x00, 0x00, 0xff, 0x01, 0x01, 0xf1, 0x10, 0x10, 0x1f, 0x00, 0x00, 0x3f, +0x00, 0x00, 0x1f, 0x10, 0x10, 0xf3, 0x02, 0x02, 0xf2, 0x12, 0x12, 0x1e, 0x00, 0x00, 0xff, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, +0x00, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x0f, 0x00, 0x00, 0x0f, 0x08, 0x08, 0x0f, 0x00, 0x00, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x0f, +0x00, 0x00, 0x0f, 0x01, 0x01, 0x09, 0x08, 0x08, 0x09, 0x09, 0x09, 0x0f, 0x00, 0x00, 0x0f, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0x00, +0x00, 0x03, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0xc0, 0xe0, +0xf0, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, +0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, +0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, +0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, +0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, +0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf8, 0xf0, 0xe0, 0xc0, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x40, 0x20, 0x10, 0x08, 0x04, 0x03, 0x00,0 }; oled_write_raw_P(skeeb_logo, sizeof(skeeb_logo)); } - + // Mods Status void render_mod_status(uint8_t modifiers) { - oled_write_P(PSTR(" "), false); + oled_write_P(PSTR(" "), false); oled_write_P(PSTR("-"), false); oled_write_P(PSTR("SHF"), (modifiers & MOD_MASK_SHIFT)); oled_write_P(PSTR("-"), false); @@ -112,7 +112,7 @@ void render_mod_status(uint8_t modifiers) { oled_write_P(PSTR("-"), false); oled_write_P(PSTR("ALT"), (modifiers & MOD_MASK_ALT)); oled_write_P(PSTR("-"), false); - oled_write_P(PSTR(" "), false); + oled_write_P(PSTR(" "), false); } // Layer State @@ -122,19 +122,19 @@ void render_layer_state(void){ case 1: oled_write_P(PSTR(" MEDIA "), false); break; case 2: oled_write_P(PSTR(" MOBA "), false); break; case 3: oled_write_P(PSTR(" FPS "), false); break; - default: oled_write_P(PSTR("Undefined"), false); + default: oled_write_P(PSTR("Undefined"), false); } } -// Keylock State +// Keylock State void render_keylock_status(uint8_t led_usb_state) { oled_write_P(PSTR(" "), false); oled_write_P(led_usb_state & (1<. - */ + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ #include QMK_KEYBOARD_H #include @@ -275,10 +275,11 @@ static void render_status(void) { oled_write_ln_P(PSTR("caps"), led_state.caps_lock); } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_left()) { render_status(); } else { render_bongo_cat(); } + return false; } diff --git a/keyboards/lily58/keymaps/drasbeck/keymap.c b/keyboards/lily58/keymaps/drasbeck/keymap.c index 6e22f04313..56bed4d7ab 100644 --- a/keyboards/lily58/keymaps/drasbeck/keymap.c +++ b/keyboards/lily58/keymaps/drasbeck/keymap.c @@ -92,7 +92,7 @@ void set_keylog(uint16_t keycode, keyrecord_t *record); // void set_timelog(void); // const char *read_timelog(void); -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { // If you want to change the display of OLED, you need to change here oled_write_ln(read_layer_state(), false); @@ -104,6 +104,7 @@ void oled_task_user(void) { } else { oled_write(read_logo(), false); } + return false; } #endif // OLED_ENABLE diff --git a/keyboards/lily58/keymaps/lily58l/keymap.c b/keyboards/lily58/keymaps/lily58l/keymap.c index 3db5f4ac64..10794b8695 100644 --- a/keyboards/lily58/keymaps/lily58l/keymap.c +++ b/keyboards/lily58/keymaps/lily58l/keymap.c @@ -271,13 +271,14 @@ void render_status_main(void) { render_keylogger_status(); } -void oled_task_user(void) { +bool oled_task_user(void) { update_log(); if (is_keyboard_master()) { render_status_main(); // Renders the current keyboard state (layer, lock, caps, scroll, etc) } else { render_lily58_logo(); } + return false; } bool process_record_user(uint16_t keycode, keyrecord_t *record) { diff --git a/keyboards/lily58/keymaps/mikefightsbears/keymap.c b/keyboards/lily58/keymaps/mikefightsbears/keymap.c index 303e7b7d5b..2b9855f190 100644 --- a/keyboards/lily58/keymaps/mikefightsbears/keymap.c +++ b/keyboards/lily58/keymaps/mikefightsbears/keymap.c @@ -156,7 +156,7 @@ const char *read_keylogs(void); // void set_timelog(void); // const char *read_timelog(void); -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { // If you want to change the display of OLED, you need to change here oled_write_ln(read_layer_state(), false); @@ -168,6 +168,7 @@ void oled_task_user(void) { } else { oled_write(read_logo(), false); } + return false; } #endif // OLED_ENABLE @@ -211,4 +212,3 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } return true; } - diff --git a/keyboards/lily58/keymaps/muuko/keymap.c b/keyboards/lily58/keymaps/muuko/keymap.c index 7ec273743c..c984202b9e 100644 --- a/keyboards/lily58/keymaps/muuko/keymap.c +++ b/keyboards/lily58/keymaps/muuko/keymap.c @@ -174,11 +174,12 @@ static void render_anim(void) { } } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { render_status(); } else { render_anim(); } + return false; } #endif diff --git a/keyboards/lily58/keymaps/narze/keymap.c b/keyboards/lily58/keymaps/narze/keymap.c index dfb51ae509..7438e72751 100644 --- a/keyboards/lily58/keymaps/narze/keymap.c +++ b/keyboards/lily58/keymaps/narze/keymap.c @@ -299,7 +299,7 @@ const char *read_timelog(void); char encoder_debug[24]; -void oled_task_user(void) { +bool oled_task_user(void) { // Host Keyboard Layer Status if (is_keyboard_master()) { // If you want to change the display of OLED, you need to change here @@ -313,6 +313,7 @@ void oled_task_user(void) { oled_write(read_logo(), false); // oled_write_ln(encoder_debug, false); } + return false; } #endif //OLED_ENABLE diff --git a/keyboards/lily58/keymaps/via/keymap.c b/keyboards/lily58/keymaps/via/keymap.c index 5cc5dc1e5a..4cae267338 100644 --- a/keyboards/lily58/keymaps/via/keymap.c +++ b/keyboards/lily58/keymaps/via/keymap.c @@ -186,7 +186,7 @@ const char *read_keylogs(void) { } //new -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { // Host Keyboard Layer Status oled_write_P(PSTR("Layer: "), false); @@ -214,6 +214,7 @@ void oled_task_user(void) { } else { render_logo(); } + return false; } #endif // OLED_ENABLE diff --git a/keyboards/lily58/keymaps/yshrsmz/keymap.c b/keyboards/lily58/keymaps/yshrsmz/keymap.c index da840e5854..6b31663239 100644 --- a/keyboards/lily58/keymaps/yshrsmz/keymap.c +++ b/keyboards/lily58/keymaps/yshrsmz/keymap.c @@ -158,7 +158,7 @@ const char *read_keylogs(void); // void set_timelog(void); // const char *read_timelog(void); -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { // If you want to change the display of OLED, you need to change here oled_write_ln(read_layer_state(), false); @@ -170,6 +170,7 @@ void oled_task_user(void) { } else { oled_write(read_logo(), false); } + return false; } #endif // OLED_ENABLE diff --git a/keyboards/lily58/keymaps/yuchi/keymap.c b/keyboards/lily58/keymaps/yuchi/keymap.c index 02279bb8a0..2cab439c3b 100644 --- a/keyboards/lily58/keymaps/yuchi/keymap.c +++ b/keyboards/lily58/keymaps/yuchi/keymap.c @@ -140,7 +140,7 @@ const char *read_keylogs(void); // void set_timelog(void); // const char *read_timelog(void); -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { // If you want to change the display of OLED, you need to change here oled_write_ln(read_layer_state(), false); @@ -152,6 +152,7 @@ void oled_task_user(void) { } else { oled_write(read_logo(), false); } + return false; } #endif // OLED_ENABLE diff --git a/keyboards/lyra/lyra.c b/keyboards/lyra/lyra.c index 19f6e44642..f479cbfd7b 100644 --- a/keyboards/lyra/lyra.c +++ b/keyboards/lyra/lyra.c @@ -1,31 +1,34 @@ /* Copyright 2021 Domanic Calleja - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ #include "lyra.h" #ifdef OLED_DRIVER_ENABLE // 'lyralogooled', 32x128px -__attribute__((weak)) oled_rotation_t oled_init_user(oled_rotation_t rotation) { +oled_rotation_t oled_init_kb(oled_rotation_t rotation) { if (is_keyboard_master()) { return OLED_ROTATION_270; } return rotation; } -__attribute__((weak)) void oled_task_user(void) { +bool oled_task_kb(void) { + if (!oled_task_user()) { + return false; + } if (is_keyboard_master()) { oled_write_P(PSTR(" "), false); # ifdef WPM_ENABLE @@ -50,40 +53,41 @@ __attribute__((weak)) void oled_task_user(void) { oled_write_P(PSTR("Dom C"), false); } else { static const char PROGMEM QMK_logo[] = { - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xe0, 0x78, 0x18, 0x0c, 0x04, 0x06, 0x02, - 0x02, 0x82, 0xc0, 0xf0, 0x38, 0x8c, 0xf2, 0x3e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x80, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x40, 0xc0, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x40, 0x40, 0x40, 0x40, 0xc0, 0x80, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x80, 0x40, 0xc0, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x1f, 0x18, 0x30, 0x20, 0xa0, 0xe0, 0xf8, - 0x3e, 0x1f, 0x13, 0x0c, 0x06, 0xc3, 0xf0, 0x60, 0x00, 0x80, 0xf0, 0xe0, 0x00, 0x38, 0xfe, 0x67, - 0x7b, 0xa5, 0xf3, 0xf0, 0x70, 0x00, 0x00, 0x80, 0xc0, 0xc0, 0xe0, 0x70, 0x30, 0x20, 0x00, 0x00, - 0x00, 0x80, 0x00, 0x00, 0x00, 0x7f, 0xc0, 0xdd, 0xdd, 0xdd, 0xe3, 0x7e, 0x3c, 0x3e, 0x61, 0xdf, - 0xde, 0xde, 0x01, 0xff, 0xfe, 0x00, 0x80, 0x80, 0x80, 0xff, 0xc0, 0xdf, 0xdf, 0xdf, 0xe0, 0xff, - 0x7f, 0x3c, 0x62, 0xdd, 0xdd, 0xdd, 0xe3, 0x7e, 0x3c, 0xfe, 0xc1, 0xfd, 0x7d, 0xc3, 0xfd, 0x7d, - 0xc3, 0xfe, 0xfc, 0x30, 0xea, 0xd5, 0xd5, 0xd5, 0xc3, 0xff, 0xfe, 0x7e, 0xc1, 0xfd, 0x7d, 0x7d, - 0xc3, 0xfe, 0xfc, 0x3f, 0xe1, 0xff, 0xff, 0x3c, 0x62, 0xdd, 0xdd, 0xdd, 0xf7, 0xe6, 0x00, 0x00, - 0x00, 0x78, 0xc4, 0xc2, 0x82, 0x82, 0x82, 0x82, 0xc2, 0xe4, 0x74, 0x7c, 0x3f, 0x1f, 0x31, 0x60, - 0xe0, 0xc0, 0x80, 0x9c, 0xbf, 0xe7, 0xf1, 0x78, 0x3e, 0x1f, 0x0b, 0x04, 0x02, 0x01, 0x00, 0x1c, - 0x3e, 0x2f, 0x13, 0x10, 0x0c, 0x1e, 0x3f, 0x2f, 0x13, 0x09, 0x1c, 0x3e, 0x2f, 0x10, 0x08, 0x06, - 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x06, - 0x06, 0x06, 0x07, 0x03, 0x7f, 0xc1, 0xbe, 0xbe, 0xbe, 0xa6, 0xe7, 0xc7, 0x60, 0xd4, 0xaa, 0xaa, - 0xaa, 0x86, 0xfe, 0xfc, 0x7f, 0xc0, 0xff, 0xff, 0x7f, 0xc0, 0xff, 0xff, 0xc4, 0xaa, 0xaa, 0xaa, - 0xa6, 0xfc, 0xf8, 0xff, 0x02, 0xff, 0xff, 0x60, 0xd4, 0xaa, 0xaa, 0xaa, 0x86, 0xfe, 0xfc, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x28, 0x24, - 0x32, 0x1b, 0x1f, 0x0f, 0x0f, 0x1f, 0x1f, 0x3c, 0x38, 0x38, 0x78, 0x70, 0x70, 0x70, 0x30, 0x38, - 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x01, 0x01, - 0x01, 0x01, 0x01, 0x01, 0x00, 0x01, 0x01, 0x01, 0x00, 0x01, 0x01, 0x01, 0x00, 0x01, 0x01, 0x01, - 0x01, 0x01, 0x07, 0x0d, 0x0e, 0x07, 0x03, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xe0, 0x78, 0x18, 0x0c, 0x04, 0x06, 0x02, + 0x02, 0x82, 0xc0, 0xf0, 0x38, 0x8c, 0xf2, 0x3e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x80, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x40, 0xc0, 0x80, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x40, 0x40, 0x40, 0x40, 0xc0, 0x80, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x80, 0x40, 0xc0, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x1f, 0x18, 0x30, 0x20, 0xa0, 0xe0, 0xf8, + 0x3e, 0x1f, 0x13, 0x0c, 0x06, 0xc3, 0xf0, 0x60, 0x00, 0x80, 0xf0, 0xe0, 0x00, 0x38, 0xfe, 0x67, + 0x7b, 0xa5, 0xf3, 0xf0, 0x70, 0x00, 0x00, 0x80, 0xc0, 0xc0, 0xe0, 0x70, 0x30, 0x20, 0x00, 0x00, + 0x00, 0x80, 0x00, 0x00, 0x00, 0x7f, 0xc0, 0xdd, 0xdd, 0xdd, 0xe3, 0x7e, 0x3c, 0x3e, 0x61, 0xdf, + 0xde, 0xde, 0x01, 0xff, 0xfe, 0x00, 0x80, 0x80, 0x80, 0xff, 0xc0, 0xdf, 0xdf, 0xdf, 0xe0, 0xff, + 0x7f, 0x3c, 0x62, 0xdd, 0xdd, 0xdd, 0xe3, 0x7e, 0x3c, 0xfe, 0xc1, 0xfd, 0x7d, 0xc3, 0xfd, 0x7d, + 0xc3, 0xfe, 0xfc, 0x30, 0xea, 0xd5, 0xd5, 0xd5, 0xc3, 0xff, 0xfe, 0x7e, 0xc1, 0xfd, 0x7d, 0x7d, + 0xc3, 0xfe, 0xfc, 0x3f, 0xe1, 0xff, 0xff, 0x3c, 0x62, 0xdd, 0xdd, 0xdd, 0xf7, 0xe6, 0x00, 0x00, + 0x00, 0x78, 0xc4, 0xc2, 0x82, 0x82, 0x82, 0x82, 0xc2, 0xe4, 0x74, 0x7c, 0x3f, 0x1f, 0x31, 0x60, + 0xe0, 0xc0, 0x80, 0x9c, 0xbf, 0xe7, 0xf1, 0x78, 0x3e, 0x1f, 0x0b, 0x04, 0x02, 0x01, 0x00, 0x1c, + 0x3e, 0x2f, 0x13, 0x10, 0x0c, 0x1e, 0x3f, 0x2f, 0x13, 0x09, 0x1c, 0x3e, 0x2f, 0x10, 0x08, 0x06, + 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x06, + 0x06, 0x06, 0x07, 0x03, 0x7f, 0xc1, 0xbe, 0xbe, 0xbe, 0xa6, 0xe7, 0xc7, 0x60, 0xd4, 0xaa, 0xaa, + 0xaa, 0x86, 0xfe, 0xfc, 0x7f, 0xc0, 0xff, 0xff, 0x7f, 0xc0, 0xff, 0xff, 0xc4, 0xaa, 0xaa, 0xaa, + 0xa6, 0xfc, 0xf8, 0xff, 0x02, 0xff, 0xff, 0x60, 0xd4, 0xaa, 0xaa, 0xaa, 0x86, 0xfe, 0xfc, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x28, 0x24, + 0x32, 0x1b, 0x1f, 0x0f, 0x0f, 0x1f, 0x1f, 0x3c, 0x38, 0x38, 0x78, 0x70, 0x70, 0x70, 0x30, 0x38, + 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x00, 0x01, 0x01, 0x01, 0x00, 0x01, 0x01, 0x01, 0x00, 0x01, 0x01, 0x01, + 0x01, 0x01, 0x07, 0x0d, 0x0e, 0x07, 0x03, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; oled_write_raw_P(QMK_logo, sizeof(QMK_logo)); } + return false; } -#endif +#endif diff --git a/keyboards/marksard/rhymestone/keymaps/default/keymap.c b/keyboards/marksard/rhymestone/keymaps/default/keymap.c index f25955c917..0bc9819773 100644 --- a/keyboards/marksard/rhymestone/keymaps/default/keymap.c +++ b/keyboards/marksard/rhymestone/keymaps/default/keymap.c @@ -158,13 +158,14 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return rotation; } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { render_status(); } else { render_logo(); } + return false; } #else diff --git a/keyboards/mechllama/g35/keymaps/default/keymap.c b/keyboards/mechllama/g35/keymaps/default/keymap.c index 814f6fdcdf..f02cba0b5a 100644 --- a/keyboards/mechllama/g35/keymaps/default/keymap.c +++ b/keyboards/mechllama/g35/keymaps/default/keymap.c @@ -66,7 +66,8 @@ const char* get_layer_name(uint8_t layer) { } } -void oled_task_user(void) { +bool oled_task_user(void) { oled_write_ln_P(get_layer_name(biton32(layer_state)), false); + return false; } #endif diff --git a/keyboards/mechwild/mercutio/keymaps/bongocat/keymap.c b/keyboards/mechwild/mercutio/keymaps/bongocat/keymap.c index b094898768..6062b8c73d 100644 --- a/keyboards/mechwild/mercutio/keymaps/bongocat/keymap.c +++ b/keyboards/mechwild/mercutio/keymaps/bongocat/keymap.c @@ -187,12 +187,13 @@ static void render_anim(void) { } } -void oled_task_user(void) { +bool oled_task_user(void) { render_anim(); oled_set_cursor(0,4); sprintf(wpm_str, "WPM: %03d", get_current_wpm()); oled_write(wpm_str, false); + return false; } #endif diff --git a/keyboards/mechwild/mercutio/keymaps/default/keymap.c b/keyboards/mechwild/mercutio/keymaps/default/keymap.c index a08150505f..8f433292b5 100644 --- a/keyboards/mechwild/mercutio/keymaps/default/keymap.c +++ b/keyboards/mechwild/mercutio/keymaps/default/keymap.c @@ -76,7 +76,8 @@ static void render_name(void) { oled_write_P(mercutio_name, false); } -void oled_task_user(void) { +bool oled_task_user(void) { render_name(); + return false; } #endif diff --git a/keyboards/mechwild/mercutio/keymaps/fancy/keymap.c b/keyboards/mechwild/mercutio/keymaps/fancy/keymap.c index cb0a6173f3..96457be6d2 100755 --- a/keyboards/mechwild/mercutio/keymaps/fancy/keymap.c +++ b/keyboards/mechwild/mercutio/keymaps/fancy/keymap.c @@ -107,7 +107,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { oled_write_P(logo_4, false); } - void oled_task_user(void) { + bool oled_task_user(void) { if ( IS_HOST_LED_OFF(USB_LED_NUM_LOCK) && IS_HOST_LED_OFF(USB_LED_CAPS_LOCK) && selected_layer == 0 && get_highest_layer(layer_state) == 0 ) { render_name(); @@ -164,5 +164,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { oled_write_P(led_state.num_lock ? PSTR("NLCK ") : PSTR(" "), false); oled_write_P(led_state.caps_lock ? PSTR("CAPS ") : PSTR(" "), false); } + return false; } #endif diff --git a/keyboards/mechwild/mercutio/keymaps/jonavin/keymap.c b/keyboards/mechwild/mercutio/keymaps/jonavin/keymap.c index 22d26db3c2..869a9f73ab 100755 --- a/keyboards/mechwild/mercutio/keymaps/jonavin/keymap.c +++ b/keyboards/mechwild/mercutio/keymaps/jonavin/keymap.c @@ -188,7 +188,7 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { oled_write_P(logo_4, false); } - void oled_task_user(void) { + bool oled_task_user(void) { if ( IS_HOST_LED_OFF(USB_LED_NUM_LOCK) && IS_HOST_LED_OFF(USB_LED_CAPS_LOCK) && get_selected_layer() == 0 && get_highest_layer(layer_state) == 0 ) { render_name(); @@ -263,6 +263,7 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { } + return false; } void suspend_power_down_user(void) { // shutdown oled when powered down to prevent OLED from showing Mercutio all the time diff --git a/keyboards/mechwild/mercutio/keymaps/via/keymap.c b/keyboards/mechwild/mercutio/keymaps/via/keymap.c index a08150505f..8f433292b5 100755 --- a/keyboards/mechwild/mercutio/keymaps/via/keymap.c +++ b/keyboards/mechwild/mercutio/keymaps/via/keymap.c @@ -76,7 +76,8 @@ static void render_name(void) { oled_write_P(mercutio_name, false); } -void oled_task_user(void) { +bool oled_task_user(void) { render_name(); + return false; } #endif diff --git a/keyboards/mechwild/murphpad/keymaps/default/keymap.c b/keyboards/mechwild/murphpad/keymaps/default/keymap.c index a30bf6bfa1..fe46e8ce5e 100644 --- a/keyboards/mechwild/murphpad/keymaps/default/keymap.c +++ b/keyboards/mechwild/murphpad/keymaps/default/keymap.c @@ -115,7 +115,7 @@ bool encoder_update_user(uint8_t index, bool clockwise) { oled_write_P(logo_4, false); } - void oled_task_user(void) { + bool oled_task_user(void) { render_logo(); oled_set_cursor(0,6); @@ -143,5 +143,6 @@ bool encoder_update_user(uint8_t index, bool clockwise) { oled_write_ln_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false); oled_write_ln_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false); oled_write_ln_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false); + return false; } #endif diff --git a/keyboards/mechwild/murphpad/keymaps/jonavin/keymap.c b/keyboards/mechwild/murphpad/keymaps/jonavin/keymap.c index dc03e334bf..043eeb992b 100644 --- a/keyboards/mechwild/murphpad/keymaps/jonavin/keymap.c +++ b/keyboards/mechwild/murphpad/keymaps/jonavin/keymap.c @@ -296,7 +296,7 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { } #ifdef LANDSCAPE_MODE - void oled_task_user(void) { + bool oled_task_user(void) { render_logo(); oled_set_cursor(8,2); @@ -359,6 +359,7 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false); oled_write_P(led_state.caps_lock ? PSTR("CAPS ") : PSTR(" "), false); oled_write_P(led_state.scroll_lock ? PSTR("SCR") : PSTR(" "), false); + return false; } #endif // LANDSCAPE_MODE @@ -368,7 +369,7 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { return OLED_ROTATION_270; // flips the display 270 degrees } - void oled_task_user(void) { + bool oled_task_user(void) { render_logo(); oled_set_cursor(0,5); @@ -408,6 +409,7 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { oled_write_ln_P(led_state.num_lock ? PSTR(" NUM") : PSTR(" "), false); oled_write_ln_P(led_state.caps_lock ? PSTR(" CAP") : PSTR(" "), false); oled_write_ln_P(led_state.scroll_lock ? PSTR(" SCR") : PSTR(" "), false); + return false; } #endif // !LANDSCAPE_MODE diff --git a/keyboards/mechwild/murphpad/keymaps/via/keymap.c b/keyboards/mechwild/murphpad/keymaps/via/keymap.c index 17e4699a98..4f4f6d571a 100644 --- a/keyboards/mechwild/murphpad/keymaps/via/keymap.c +++ b/keyboards/mechwild/murphpad/keymaps/via/keymap.c @@ -113,7 +113,7 @@ bool encoder_update_user(uint8_t index, bool clockwise) { oled_write_P(logo_4, false); } - void oled_task_user(void) { + bool oled_task_user(void) { render_logo(); oled_set_cursor(0,6); @@ -141,5 +141,6 @@ bool encoder_update_user(uint8_t index, bool clockwise) { oled_write_ln_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false); oled_write_ln_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false); oled_write_ln_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false); + return false; } #endif diff --git a/keyboards/merge/um70/keymaps/default/keymap.c b/keyboards/merge/um70/keymaps/default/keymap.c index 0a775929d0..926f7836aa 100644 --- a/keyboards/merge/um70/keymaps/default/keymap.c +++ b/keyboards/merge/um70/keymaps/default/keymap.c @@ -169,7 +169,7 @@ static void print_status_narrow(void) { // WPM counter End } -void oled_task_user(void) { +bool oled_task_user(void) { current_wpm = get_current_wpm(); if (is_keyboard_master()) { print_status_narrow(); @@ -178,6 +178,7 @@ void oled_task_user(void) { render_logo(); //print_status_narrow(); } + return false; } #endif diff --git a/keyboards/merge/um70/keymaps/via/keymap.c b/keyboards/merge/um70/keymaps/via/keymap.c index aaf682ffd1..f7255eacf2 100644 --- a/keyboards/merge/um70/keymaps/via/keymap.c +++ b/keyboards/merge/um70/keymaps/via/keymap.c @@ -173,7 +173,7 @@ static void print_status_narrow(void) { // WPM counter End } -void oled_task_user(void) { +bool oled_task_user(void) { current_wpm = get_current_wpm(); if (is_keyboard_master()) { print_status_narrow(); @@ -182,6 +182,7 @@ void oled_task_user(void) { render_logo(); //print_status_narrow(); } + return false; } #endif diff --git a/keyboards/misonoworks/chocolatebar/chocolatebar.c b/keyboards/misonoworks/chocolatebar/chocolatebar.c index 448d955884..dc9a251df4 100644 --- a/keyboards/misonoworks/chocolatebar/chocolatebar.c +++ b/keyboards/misonoworks/chocolatebar/chocolatebar.c @@ -18,11 +18,14 @@ along with this program. If not, see . #include "chocolatebar.h" #ifdef OLED_ENABLE -__attribute__((weak)) oled_rotation_t oled_init_user(oled_rotation_t rotation) { - return OLED_ROTATION_270; // flips the display 180 degrees if offhand +oled_rotation_t oled_init_kb(oled_rotation_t rotation) { + return OLED_ROTATION_270; } -__attribute__((weak)) void oled_task_user(void) { +bool oled_task_kb(void) { + if (!oled_task_user()) { + return false; + } static const char PROGMEM base_logo[] = {// 'choccy oled base', 32x128px 0xff, 0xff, 0xff, 0xff, 0x7f, 0x3f, 0x1f, 0x0f, 0x8f, 0xff, 0x7f, 0x1f, 0x0f, 0x0f, 0x1f, 0x3f, 0x3f, 0x3f, 0x3f, 0x7f, 0x7f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x7f, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7c, 0x38, 0x08, 0x04, 0x02, 0x03, 0xe3, 0x98, 0x08, 0x08, 0x0c, 0x00, 0x00, 0x00, 0x0c, 0x0c, 0x9e, 0x00, 0x00, 0x00, 0x00, 0xfe, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xfc, 0xf8, 0x00, 0x00, 0x00, 0x00, 0xff, 0x03, 0x01, 0x01, 0xff, 0x00, 0x00, 0x00, 0x61, 0x63, 0xf7, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f, 0x30, 0x20, 0x20, 0x30, 0x3f, 0x38, 0x38, 0x38, 0x38, 0x38, 0x38, 0x38, 0x38, 0x38, 0x3c, 0x30, 0x20, 0x20, 0x30, 0x3f, 0x3e, 0x7e, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0xfc, 0xbc, 0x14, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x14, 0xbc, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x3f, 0x7f, 0x3b, 0x30, 0x00, 0x00, 0x04, 0x04, 0x04, 0x04, 0x04, 0x00, 0x00, 0x00, 0x43, 0xff, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xc0, 0x80, 0x80, 0xc3, 0xc3, 0xc2, 0xc2, 0xc2, 0xc3, 0xc2, 0xc0, 0xc0, 0xc2, 0xc3, 0xc2, 0xc2, 0xc2, 0x42, 0x43, 0xc0, 0x80, 0x80, 0xc0, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x7f, 0xbf, 0xdf, 0xef, 0x67, 0x9b, 0x9d, 0x6e, 0x75, 0xb3, 0xc5, 0xce, 0x57, 0xbb, 0xdc, 0xed, 0xf3, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, @@ -46,5 +49,6 @@ __attribute__((weak)) void oled_task_user(void) { default: oled_write_raw_P(base_logo, sizeof(base_logo)); } + return false; } #endif diff --git a/keyboards/montsinger/rebound/rev3/keymaps/rossman360/keymap.c b/keyboards/montsinger/rebound/rev3/keymaps/rossman360/keymap.c index 887bffeb82..207f907f6d 100644 --- a/keyboards/montsinger/rebound/rev3/keymaps/rossman360/keymap.c +++ b/keyboards/montsinger/rebound/rev3/keymaps/rossman360/keymap.c @@ -75,7 +75,7 @@ case _BASE: } #ifdef OLED_ENABLE -void oled_task_user(void) { +bool oled_task_user(void) { // Host Keyboard Layer Status oled_write_P(PSTR(""), false); @@ -107,6 +107,7 @@ void oled_task_user(void) { oled_write_P(led_state.caps_lock ? PSTR("CAPS") : PSTR(" "), false); oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false); + return false; } #endif diff --git a/keyboards/montsinger/rebound/rev4/keymaps/rossman360/keymap.c b/keyboards/montsinger/rebound/rev4/keymaps/rossman360/keymap.c index 1465372ec2..d49465eea9 100644 --- a/keyboards/montsinger/rebound/rev4/keymaps/rossman360/keymap.c +++ b/keyboards/montsinger/rebound/rev4/keymaps/rossman360/keymap.c @@ -84,7 +84,7 @@ case _DEL: } #ifdef OLED_ENABLE -void oled_task_user(void) { +bool oled_task_user(void) { // Host Keyboard Layer Status oled_write_P(PSTR(""), false); @@ -116,6 +116,7 @@ void oled_task_user(void) { oled_write_P(led_state.caps_lock ? PSTR("CAPS") : PSTR(" "), false); oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false); + return false; } #endif diff --git a/keyboards/nullbitsco/nibble/keymaps/oled/keymap.c b/keyboards/nullbitsco/nibble/keymaps/oled/keymap.c index 14f79f5fbf..300af70737 100644 --- a/keyboards/nullbitsco/nibble/keymaps/oled/keymap.c +++ b/keyboards/nullbitsco/nibble/keymaps/oled/keymap.c @@ -83,8 +83,9 @@ static void render_logo(void) { oled_write_raw_P(nibble_logo, sizeof(nibble_logo)); } -void oled_task_user(void) { +bool oled_task_user(void) { render_logo(); + return false; } #endif diff --git a/keyboards/nullbitsco/nibble/keymaps/oled_bongocat/keymap.c b/keyboards/nullbitsco/nibble/keymaps/oled_bongocat/keymap.c index 5c4e31ab6b..a4e484f9cf 100644 --- a/keyboards/nullbitsco/nibble/keymaps/oled_bongocat/keymap.c +++ b/keyboards/nullbitsco/nibble/keymaps/oled_bongocat/keymap.c @@ -155,7 +155,7 @@ static void render_anim(void) { } } -void oled_task_user(void) { +bool oled_task_user(void) { render_anim(); oled_set_cursor(0, 14); @@ -168,6 +168,8 @@ void oled_task_user(void) { wpm_counter[1] = '0'; wpm_counter[0] = '>'; oled_write_ln(wpm_counter, false); + + return false; } #endif diff --git a/keyboards/nullbitsco/nibble/keymaps/oled_status/keymap.c b/keyboards/nullbitsco/nibble/keymaps/oled_status/keymap.c index 161eeedc3a..fa72a78905 100644 --- a/keyboards/nullbitsco/nibble/keymaps/oled_status/keymap.c +++ b/keyboards/nullbitsco/nibble/keymaps/oled_status/keymap.c @@ -51,11 +51,12 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_180; } -void oled_task_user(void) { +bool oled_task_user(void) { if (timer_elapsed(oled_timer) >= 3000) { set_oled_mode(OLED_MODE_IDLE); } render_frame(); + return false; } #endif diff --git a/keyboards/nullbitsco/nibble/keymaps/snailmap/keymap.c b/keyboards/nullbitsco/nibble/keymaps/snailmap/keymap.c index d628a976fb..e549f22a83 100644 --- a/keyboards/nullbitsco/nibble/keymaps/snailmap/keymap.c +++ b/keyboards/nullbitsco/nibble/keymaps/snailmap/keymap.c @@ -106,73 +106,73 @@ static void write_pixel(int x, int y, bool onoff) { static void render_background(void) { if (oled_horizontal) { static const char PROGMEM oled_keymap_horizontal[] = { - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, - 0x84, 0x80, 0x80, 0x80, 0x80, 0x04, 0x00, 0x00, 0x00, 0x80, 0x04, 0x00, 0x00, 0x00, 0x80, 0x04, - 0x00, 0x00, 0x00, 0x80, 0x04, 0x00, 0x00, 0x00, 0x80, 0x04, 0x00, 0x00, 0x00, 0x80, 0x04, 0x00, - 0x00, 0x00, 0x80, 0x04, 0x00, 0x00, 0x00, 0x80, 0x04, 0x00, 0x00, 0x00, 0x80, 0x04, 0x00, 0x00, - 0x00, 0x80, 0x04, 0x00, 0x00, 0x00, 0x80, 0x04, 0x00, 0x00, 0x00, 0x80, 0x04, 0x00, 0x00, 0x00, - 0x80, 0x04, 0x04, 0x04, 0x04, 0x84, 0x84, 0x84, 0x84, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, - 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x10, - 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, - 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, - 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, - 0x00, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, - 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, - 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, - 0x02, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x02, - 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x02, 0x02, - 0x02, 0x02, 0x02, 0x02, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x00, + 0x84, 0x80, 0x80, 0x80, 0x80, 0x04, 0x00, 0x00, 0x00, 0x80, 0x04, 0x00, 0x00, 0x00, 0x80, 0x04, + 0x00, 0x00, 0x00, 0x80, 0x04, 0x00, 0x00, 0x00, 0x80, 0x04, 0x00, 0x00, 0x00, 0x80, 0x04, 0x00, + 0x00, 0x00, 0x80, 0x04, 0x00, 0x00, 0x00, 0x80, 0x04, 0x00, 0x00, 0x00, 0x80, 0x04, 0x00, 0x00, + 0x00, 0x80, 0x04, 0x00, 0x00, 0x00, 0x80, 0x04, 0x00, 0x00, 0x00, 0x80, 0x04, 0x00, 0x00, 0x00, + 0x80, 0x04, 0x04, 0x04, 0x04, 0x84, 0x84, 0x84, 0x84, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, + 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x10, + 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, + 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, + 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, + 0x00, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, + 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, + 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, + 0x02, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x02, + 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x02, 0x02, + 0x02, 0x02, 0x02, 0x02, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; oled_write_raw_P(oled_keymap_horizontal, sizeof(oled_keymap_horizontal)); } else { static const char PROGMEM oled_keymap_vertical[] = { - 0x00, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x00, 0x00, - 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x87, 0x00, 0x00, 0x00, 0x00, 0x7f, 0x00, 0x00, 0x00, - 0x00, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, - 0x00, 0x43, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x21, 0x00, 0x00, 0x00, 0x00, 0x42, 0x00, 0x00, 0x00, 0x00, 0x21, 0x00, 0x00, 0x00, - 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x00, 0x00, - 0x00, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x21, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, - 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x42, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x42, 0x00, 0x00, 0x00, - 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, - 0x00, 0x42, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x21, 0x00, 0x00, 0x00, 0x00, 0x42, 0x00, 0x00, 0x00, 0x00, 0x21, 0x00, 0x00, 0x00, - 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x00, 0x00, 0x00, - 0x00, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, - 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x00, 0x00, + 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x7f, 0x00, 0x00, 0x00, 0x00, 0x87, 0x00, 0x00, 0x00, 0x00, 0x7f, 0x00, 0x00, 0x00, + 0x00, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, + 0x00, 0x43, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x21, 0x00, 0x00, 0x00, 0x00, 0x42, 0x00, 0x00, 0x00, 0x00, 0x21, 0x00, 0x00, 0x00, + 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x00, 0x00, + 0x00, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x21, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, + 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x42, 0x00, 0x00, 0x00, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0x42, 0x00, 0x00, 0x00, + 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, + 0x00, 0x42, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x21, 0x00, 0x00, 0x00, 0x00, 0x42, 0x00, 0x00, 0x00, 0x00, 0x21, 0x00, 0x00, 0x00, + 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x84, 0x00, 0x00, 0x00, 0x00, 0xf8, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x00, 0x00, 0x00, + 0x00, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, + 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; oled_write_raw_P(oled_keymap_vertical, sizeof(oled_keymap_vertical)); @@ -257,7 +257,7 @@ static void render_keymap(uint8_t key_row, uint8_t key_col, bool onoff) { int top = keymap_coords[key_row][key_col][1] + keymap_template[1]; int right = left + length - 1; int bottom = top + 4; - + // Special case 1 - Draw enter key on ISO layout, return if ((ansi_layout == false) && (key_row == 2) && (key_col == 14)) { for (int i = 0; i < 10; i++) { @@ -427,7 +427,7 @@ static void render_wpm_graph(int current_wpm) { } // Call OLED functions -void oled_task_user(void) { +bool oled_task_user(void) { // Draw OLED keyboard, prevent redraw if (first_loop) { render_background(); @@ -456,6 +456,7 @@ void oled_task_user(void) { render_wpm_graph(current_wpm); timer = timer_read(); } + return false; } #endif @@ -463,7 +464,7 @@ void oled_task_user(void) { bool process_record_user(uint16_t keycode, keyrecord_t *record) { // Forwards keystrokes from an external input device over UART/TRRS process_record_remote_kb(keycode, record); - + #ifdef OLED_ENABLE // Toggle pixels surrounding key render_keymap(record->event.key.row, record->event.key.col, record->event.pressed); @@ -472,7 +473,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { return true; } -// Rotary encoder - RGB and OLED settings +// Rotary encoder - RGB and OLED settings void change_RGB(bool clockwise) { // While on any layer except default: // Rotary = RGB Mode bool shift = get_mods() & MOD_MASK_SHIFT; // Rotary + Shift = OLED Brightness @@ -539,4 +540,4 @@ void matrix_init_user(void) { // Scan and parse keystrokes from remote keyboard, if connected void matrix_scan_user(void) { matrix_scan_remote_kb(); -} \ No newline at end of file +} diff --git a/keyboards/nullbitsco/scramble/keymaps/oled/keymap.c b/keyboards/nullbitsco/scramble/keymaps/oled/keymap.c index 109da78ad6..b1c9282253 100644 --- a/keyboards/nullbitsco/scramble/keymaps/oled/keymap.c +++ b/keyboards/nullbitsco/scramble/keymaps/oled/keymap.c @@ -67,8 +67,9 @@ static void render_logo(void) { oled_write_raw_P(nullbits_logo, sizeof(nullbits_logo)); } -void oled_task_user(void) { +bool oled_task_user(void) { render_logo(); + return false; } #endif diff --git a/keyboards/palette1202/keymaps/default/keymap.c b/keyboards/palette1202/keymaps/default/keymap.c index fb28dedbe5..a1faa8558f 100644 --- a/keyboards/palette1202/keymaps/default/keymap.c +++ b/keyboards/palette1202/keymaps/default/keymap.c @@ -274,7 +274,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { // OLED Display #ifdef OLED_ENABLE -void oled_task_user(void) { +bool oled_task_user(void) { // get layer Number uint8_t currentDefault = get_highest_layer(default_layer_state); uint8_t currentLayer = get_highest_layer(layer_state); @@ -326,5 +326,6 @@ void oled_task_user(void) { // pressed key / 4th line of the logo render_row(3, " "); } + return false; } #endif // #ifdef OLED_ENABLE diff --git a/keyboards/palette1202/keymaps/key-check/keymap.c b/keyboards/palette1202/keymaps/key-check/keymap.c index 6291b5f8a0..00666007a2 100644 --- a/keyboards/palette1202/keymaps/key-check/keymap.c +++ b/keyboards/palette1202/keymaps/key-check/keymap.c @@ -142,10 +142,11 @@ bool encoder_update_user(uint8_t index, bool clockwise) { // OLED Display #ifdef OLED_ENABLE -void oled_task_user(void) { +bool oled_task_user(void) { render_row(0, "TEST"); render_row(1, "test"); render_row(2, "TEST"); render_row(3, "test"); + return false; } #endif // #ifdef OLED_ENABLE diff --git a/keyboards/palette1202/palette1202.c b/keyboards/palette1202/palette1202.c index be7fd6443a..a193964e3e 100644 --- a/keyboards/palette1202/palette1202.c +++ b/keyboards/palette1202/palette1202.c @@ -17,7 +17,7 @@ // initialize OLED if OLED is enabled #ifdef OLED_ENABLE - oled_rotation_t oled_init_user(oled_rotation_t rotation) { +oled_rotation_t oled_init_kb(oled_rotation_t rotation) { return OLED_ROTATION_180; - } +} #endif diff --git a/keyboards/pistachio_pro/keymaps/default/keymap.c b/keyboards/pistachio_pro/keymaps/default/keymap.c index a79b9a2b52..3fe6e8a5f5 100644 --- a/keyboards/pistachio_pro/keymaps/default/keymap.c +++ b/keyboards/pistachio_pro/keymaps/default/keymap.c @@ -83,12 +83,12 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_180; } -void oled_task_user(void) { +bool oled_task_user(void) { oled_write_ln_P(PSTR(" - PistachioPro -"), false); print_airstate(); print_keylog(); - return; + return false; } /* Encoder */ @@ -120,4 +120,4 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } return true; -} \ No newline at end of file +} diff --git a/keyboards/pistachio_pro/keymaps/rate/keymap.c b/keyboards/pistachio_pro/keymaps/rate/keymap.c index e08e167700..7aa70c51d1 100644 --- a/keyboards/pistachio_pro/keymaps/rate/keymap.c +++ b/keyboards/pistachio_pro/keymaps/rate/keymap.c @@ -85,12 +85,12 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_180; } -void oled_task_user(void) { +bool oled_task_user(void) { oled_write_ln_P(PSTR(" - PistachioPro -"), false); print_airstate(); print_keylog(); - return; + return false; } /* Encoder */ @@ -122,4 +122,4 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } return true; -} \ No newline at end of file +} diff --git a/keyboards/pistachio_pro/keymaps/via/keymap.c b/keyboards/pistachio_pro/keymaps/via/keymap.c index 833bbb8ecc..7517b4a6e4 100644 --- a/keyboards/pistachio_pro/keymaps/via/keymap.c +++ b/keyboards/pistachio_pro/keymaps/via/keymap.c @@ -101,12 +101,12 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_180; } -void oled_task_user(void) { +bool oled_task_user(void) { oled_write_ln_P(PSTR(" - PistachioPro -"), false); print_airstate(); print_keylog(); - return; + return false; } /* Encoder */ @@ -138,4 +138,4 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } return true; -} \ No newline at end of file +} diff --git a/keyboards/plut0nium/0x3e/keymaps/default/keymap.c b/keyboards/plut0nium/0x3e/keymaps/default/keymap.c index ed2c464e46..8f1a1d1960 100644 --- a/keyboards/plut0nium/0x3e/keymaps/default/keymap.c +++ b/keyboards/plut0nium/0x3e/keymaps/default/keymap.c @@ -24,15 +24,15 @@ enum layer_names { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Base */ [_QWERTY] = LAYOUT( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, - MO(_FN), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_PGUP, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, - KC_LCTL, KC_LGUI, KC_MENU, KC_LALT, KC_SPC, KC_SPC, KC_PGDN, KC_SPC, KC_SPC, KC_RALT, KC_LBRC, KC_RBRC, KC_RCTL + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + MO(_FN), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_PGUP, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_MENU, KC_LALT, KC_SPC, KC_SPC, KC_PGDN, KC_SPC, KC_SPC, KC_RALT, KC_LBRC, KC_RBRC, KC_RCTL ), [_FN] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_DEL, - RESET, _______, KC_UP, _______, _______, _______, _______, _______, _______, KC_F11, KC_F12, _______, + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_DEL, + RESET, _______, KC_UP, _______, _______, _______, _______, _______, _______, KC_F11, KC_F12, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_HUI, RGB_SAI, RGB_VAI, RGB_MOD, _______, KC_END, _______, _______, BL_INC, KC_MPLY, KC_VOLU, KC_MUTE, _______, RGB_HUD, RGB_SAD, RGB_VAD, RGB_TOG, RGB_TOG, KC_HOME, BL_TOGG, BL_TOGG, BL_DEC, KC_MPRV, KC_VOLD, KC_MNXT @@ -43,11 +43,11 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { static void render_logo(void) { static const char PROGMEM my_logo[] = { // '0x3E_logo_32x16', 32x16px - 0xff, 0x0f, 0x07, 0xf3, 0x73, 0xb3, 0x07, 0x0f, 0xff, 0x3f, 0x3f, 0xff, 0xff, 0x3f, 0x3f, 0xff, - 0xe7, 0xe3, 0x33, 0x33, 0x03, 0x87, 0xff, 0xff, 0x03, 0x03, 0x33, 0x33, 0x33, 0xf3, 0xff, 0xff, - 0x7f, 0x78, 0x70, 0x66, 0x67, 0x67, 0x70, 0x78, 0x7f, 0x67, 0x62, 0x78, 0x78, 0x62, 0x67, 0x7f, + 0xff, 0x0f, 0x07, 0xf3, 0x73, 0xb3, 0x07, 0x0f, 0xff, 0x3f, 0x3f, 0xff, 0xff, 0x3f, 0x3f, 0xff, + 0xe7, 0xe3, 0x33, 0x33, 0x03, 0x87, 0xff, 0xff, 0x03, 0x03, 0x33, 0x33, 0x33, 0xf3, 0xff, 0xff, + 0x7f, 0x78, 0x70, 0x66, 0x67, 0x67, 0x70, 0x78, 0x7f, 0x67, 0x62, 0x78, 0x78, 0x62, 0x67, 0x7f, 0x73, 0x63, 0x67, 0x67, 0x60, 0x70, 0x7f, 0x7f, 0x60, 0x60, 0x67, 0x67, 0x67, 0x67, 0x7f, 0x7f - }; + }; oled_write_raw_P(my_logo, sizeof(my_logo)); } @@ -117,7 +117,7 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_270; // flips the display 180 degrees if offhand } -void oled_task_user(void) { +bool oled_task_user(void) { render_logo(); oled_set_cursor(0,2); // default logo is 16px high (2 lines) @@ -153,5 +153,6 @@ void oled_task_user(void) { render_rgb_status(); #endif + return false; } #endif diff --git a/keyboards/pteron36/keymaps/via/keymap.c b/keyboards/pteron36/keymaps/via/keymap.c index ce96ea6c59..40e3088a8e 100644 --- a/keyboards/pteron36/keymaps/via/keymap.c +++ b/keyboards/pteron36/keymaps/via/keymap.c @@ -1,19 +1,19 @@ /* Copyright HarshitGoel96 2020 * With permission from mattdibi, the original maintainer of the Redox hardware. - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ #include QMK_KEYBOARD_H // Each layer gets a name for readability, which is then used in the keymap matrix below. @@ -131,12 +131,13 @@ static void render_status(void){ oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false); oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false); } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { render_status(); // Renders the current keyboard state (layer, lock, caps, scroll, etc) } else { render_logo(); // Renders a static logo oled_scroll_left(); // Turns on scrolling } + return false; } #endif diff --git a/keyboards/pteron36/pteron36.c b/keyboards/pteron36/pteron36.c index 3288626f00..b7f7d8d44d 100644 --- a/keyboards/pteron36/pteron36.c +++ b/keyboards/pteron36/pteron36.c @@ -37,7 +37,10 @@ bool encoder_update_kb(uint8_t index, bool clockwise) { } //common oled support. #ifdef OLED_DRIVER_ENABLE -__attribute__((weak)) void oled_task_user(void) { +bool oled_task_kb(void) { + if (!oled_task_user()) { + return false; + } if (is_keyboard_master()) { oled_write_P(PSTR("Layer: "), false); switch (get_highest_layer(layer_state)) { @@ -62,5 +65,6 @@ __attribute__((weak)) void oled_task_user(void) { oled_write_P(qmk_logo, false); oled_scroll_left(); // Turns on scrolling } + return false; } #endif diff --git a/keyboards/rainkeeb/keymaps/default/keymap.c b/keyboards/rainkeeb/keymaps/default/keymap.c index 3d82661f8c..08cf7462c3 100644 --- a/keyboards/rainkeeb/keymaps/default/keymap.c +++ b/keyboards/rainkeeb/keymaps/default/keymap.c @@ -87,7 +87,7 @@ bool encoder_update_user(uint8_t index, bool clockwise) { char wpm[10]; -void oled_task_user(void) { +bool oled_task_user(void) { sprintf(wpm, "WPM: %03d", get_current_wpm()); // Host Keyboard Layer Status @@ -113,4 +113,5 @@ void oled_task_user(void) { } oled_write_P(PSTR(" "), false); oled_write(wpm, false); + return false; } diff --git a/keyboards/rainkeeb/keymaps/via/keymap.c b/keyboards/rainkeeb/keymaps/via/keymap.c index 3d82661f8c..08cf7462c3 100644 --- a/keyboards/rainkeeb/keymaps/via/keymap.c +++ b/keyboards/rainkeeb/keymaps/via/keymap.c @@ -87,7 +87,7 @@ bool encoder_update_user(uint8_t index, bool clockwise) { char wpm[10]; -void oled_task_user(void) { +bool oled_task_user(void) { sprintf(wpm, "WPM: %03d", get_current_wpm()); // Host Keyboard Layer Status @@ -113,4 +113,5 @@ void oled_task_user(void) { } oled_write_P(PSTR(" "), false); oled_write(wpm, false); + return false; } diff --git a/keyboards/ramonimbao/herringbone/pro/keymaps/default/keymap.c b/keyboards/ramonimbao/herringbone/pro/keymaps/default/keymap.c index ac3c11e699..a04192a3e4 100644 --- a/keyboards/ramonimbao/herringbone/pro/keymaps/default/keymap.c +++ b/keyboards/ramonimbao/herringbone/pro/keymaps/default/keymap.c @@ -80,7 +80,7 @@ static void render_pattern(void) { } } -void oled_task_user(void) { +bool oled_task_user(void) { // Render Herringbone pattern render_pattern(); oled_render(); @@ -94,5 +94,6 @@ void oled_task_user(void) { oled_set_cursor(0, 2); oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false); oled_render(); + return false; } #endif diff --git a/keyboards/ramonimbao/herringbone/pro/keymaps/iso/keymap.c b/keyboards/ramonimbao/herringbone/pro/keymaps/iso/keymap.c index 3409fbc16e..6d280905dc 100644 --- a/keyboards/ramonimbao/herringbone/pro/keymaps/iso/keymap.c +++ b/keyboards/ramonimbao/herringbone/pro/keymaps/iso/keymap.c @@ -80,7 +80,7 @@ static void render_pattern(void) { } } -void oled_task_user(void) { +bool oled_task_user(void) { // Render Herringbone pattern render_pattern(); oled_render(); @@ -94,5 +94,6 @@ void oled_task_user(void) { oled_set_cursor(0, 2); oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false); oled_render(); + return false; } #endif diff --git a/keyboards/ramonimbao/herringbone/pro/keymaps/via/keymap.c b/keyboards/ramonimbao/herringbone/pro/keymaps/via/keymap.c index 5c97a3fb83..fceca1a8bd 100644 --- a/keyboards/ramonimbao/herringbone/pro/keymaps/via/keymap.c +++ b/keyboards/ramonimbao/herringbone/pro/keymaps/via/keymap.c @@ -132,7 +132,7 @@ static void render_pattern(void) { } } -void oled_task_user(void) { +bool oled_task_user(void) { // Render Herringbone pattern render_pattern(); oled_render(); @@ -146,5 +146,6 @@ void oled_task_user(void) { oled_set_cursor(0, 2); oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false); oled_render(); + return false; } #endif diff --git a/keyboards/rart/rart67m/rart67m.c b/keyboards/rart/rart67m/rart67m.c index 6b2c6dffbb..e696a5cf3e 100644 --- a/keyboards/rart/rart67m/rart67m.c +++ b/keyboards/rart/rart67m/rart67m.c @@ -21,11 +21,14 @@ #define ANIM_FRAME_DURATION 200 #define ANIM_SIZE 512 #ifdef OLED_ENABLE -__attribute__((weak)) oled_rotation_t oled_init_user(oled_rotation_t rotation) { +oled_rotation_t oled_init_kb(oled_rotation_t rotation) { return OLED_ROTATION_180; } -__attribute__((weak)) void oled_task_user(void) { +bool oled_task_kb(void) { + if (!oled_task_user()) { + return false; + } static uint32_t anim_timer = 0; static uint32_t anim_sleep = 0; static uint8_t current_idle_frame = 0; @@ -128,7 +131,7 @@ static uint8_t current_tap_frame = 0; } } } - + return false; } -#endif \ No newline at end of file +#endif diff --git a/keyboards/rart/rart75m/rart75m.c b/keyboards/rart/rart75m/rart75m.c index 73e37d2d1a..87a12a9a1f 100644 --- a/keyboards/rart/rart75m/rart75m.c +++ b/keyboards/rart/rart75m/rart75m.c @@ -31,7 +31,10 @@ bool encoder_update_kb(uint8_t index, bool clockwise) { #endif #ifdef OLED_ENABLE -__attribute__((weak)) void oled_task_user(void) { +bool oled_task_kb(void) { + if (!oled_task_user()) { + return false; + } // Host Keyboard Layer Status oled_write_P(PSTR("R A R T 7 5 M\nLayer: "), false); @@ -52,6 +55,8 @@ __attribute__((weak)) void oled_task_user(void) { oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false); oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false); oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false); + + return false; } #endif diff --git a/keyboards/rart/rartand/keymaps/default/keymap.c b/keyboards/rart/rartand/keymaps/default/keymap.c index 2dd9378b0d..3d04ffc6f3 100644 --- a/keyboards/rart/rartand/keymaps/default/keymap.c +++ b/keyboards/rart/rartand/keymaps/default/keymap.c @@ -47,7 +47,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; #ifdef OLED_ENABLE -void oled_task_user(void) { +bool oled_task_user(void) { // Host Keyboard Layer Status oled_write_P(PSTR("* R A R T A N D *\n Powered by QMK\nLayer: "), false); @@ -74,5 +74,6 @@ void oled_task_user(void) { oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false); oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false); oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false); + return false; } #endif diff --git a/keyboards/rart/rartand/keymaps/via/keymap.c b/keyboards/rart/rartand/keymaps/via/keymap.c index 2dd9378b0d..3d04ffc6f3 100644 --- a/keyboards/rart/rartand/keymaps/via/keymap.c +++ b/keyboards/rart/rartand/keymaps/via/keymap.c @@ -47,7 +47,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; #ifdef OLED_ENABLE -void oled_task_user(void) { +bool oled_task_user(void) { // Host Keyboard Layer Status oled_write_P(PSTR("* R A R T A N D *\n Powered by QMK\nLayer: "), false); @@ -74,5 +74,6 @@ void oled_task_user(void) { oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false); oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false); oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false); + return false; } #endif diff --git a/keyboards/rart/rartland/rartland.c b/keyboards/rart/rartland/rartland.c index 089ba9295c..e4a555d128 100644 --- a/keyboards/rart/rartland/rartland.c +++ b/keyboards/rart/rartland/rartland.c @@ -31,7 +31,10 @@ bool encoder_update_kb(uint8_t index, bool clockwise) { #endif #ifdef OLED_ENABLE -__attribute__((weak)) void oled_task_user(void) { +bool oled_task_kb(void) { + if (!oled_task_user()) { + return false; + } // Host Keyboard Layer Status oled_write_P(PSTR("R A R T L A N D\nLayer: "), false); @@ -52,5 +55,7 @@ __attribute__((weak)) void oled_task_user(void) { oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false); oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false); oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false); + + return false; } #endif diff --git a/keyboards/rart/rartlice/keymaps/default/keymap.c b/keyboards/rart/rartlice/keymaps/default/keymap.c index 2ba4abff31..372a856bc2 100644 --- a/keyboards/rart/rartlice/keymaps/default/keymap.c +++ b/keyboards/rart/rartlice/keymaps/default/keymap.c @@ -35,7 +35,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; #ifdef OLED_ENABLE -void oled_task_user(void) { +bool oled_task_user(void) { // Host Keyboard Layer Status oled_write_P(PSTR("R A R T L I C E\nLayer: "), false); @@ -56,5 +56,6 @@ void oled_task_user(void) { oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false); oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false); oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false); + return false; } #endif diff --git a/keyboards/rart/rartlice/keymaps/via/keymap.c b/keyboards/rart/rartlice/keymaps/via/keymap.c index 22e52c403d..700bb7f414 100644 --- a/keyboards/rart/rartlice/keymaps/via/keymap.c +++ b/keyboards/rart/rartlice/keymaps/via/keymap.c @@ -49,7 +49,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; #ifdef OLED_ENABLE -void oled_task_user(void) { +bool oled_task_user(void) { // Host Keyboard Layer Status oled_write_P(PSTR("* R A R T L I C E *\n Powered by QMK\nLayer: "), false); @@ -76,5 +76,6 @@ void oled_task_user(void) { oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false); oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false); oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false); + return false; } #endif diff --git a/keyboards/rgbkb/mun/keymaps/default/keymap.c b/keyboards/rgbkb/mun/keymaps/default/keymap.c index b120c3a37a..866b8a0d15 100644 --- a/keyboards/rgbkb/mun/keymaps/default/keymap.c +++ b/keyboards/rgbkb/mun/keymaps/default/keymap.c @@ -230,7 +230,7 @@ static void render_touch(void) oled_write_P(touch_encoder_calibrating() ? PSTR("CLBRT") : PSTR(" "), false); } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_left()) { render_icon(); oled_write_P(PSTR(" "), false); @@ -245,6 +245,7 @@ void oled_task_user(void) { oled_write_P(PSTR(" "), false); render_rgb_menu(); } + return false; } oled_rotation_t oled_init_user(oled_rotation_t rotation) { diff --git a/keyboards/rgbkb/mun/keymaps/via/keymap.c b/keyboards/rgbkb/mun/keymaps/via/keymap.c index b120c3a37a..866b8a0d15 100644 --- a/keyboards/rgbkb/mun/keymaps/via/keymap.c +++ b/keyboards/rgbkb/mun/keymaps/via/keymap.c @@ -230,7 +230,7 @@ static void render_touch(void) oled_write_P(touch_encoder_calibrating() ? PSTR("CLBRT") : PSTR(" "), false); } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_left()) { render_icon(); oled_write_P(PSTR(" "), false); @@ -245,6 +245,7 @@ void oled_task_user(void) { oled_write_P(PSTR(" "), false); render_rgb_menu(); } + return false; } oled_rotation_t oled_init_user(oled_rotation_t rotation) { diff --git a/keyboards/rgbkb/mun/keymaps/xulkal2/keymap.c b/keyboards/rgbkb/mun/keymaps/xulkal2/keymap.c index cd1eec7515..ae5c0c9b19 100644 --- a/keyboards/rgbkb/mun/keymaps/xulkal2/keymap.c +++ b/keyboards/rgbkb/mun/keymaps/xulkal2/keymap.c @@ -119,7 +119,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, KC_LEFT, KC_DOWN, KC_RIGHT,_______, _______, _______, _______, _______, KC_KP_4, KC_KP_5, KC_KP_6, KC_PPLS, _______, _______, _______, _______, _______, _______, EEP_RST, _______, _______, _______, KC_KP_1, KC_KP_2, KC_KP_3, KC_PENT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_KP_0, KC_PDOT, KC_PENT, _______, - + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) @@ -223,7 +223,7 @@ void render_debug_scan(void) { } #endif -void oled_task_user(void) { +bool oled_task_user(void) { #if !defined(MATRIX_SCAN_DEBUG) if (is_keyboard_left()) { render_layer(); @@ -241,8 +241,9 @@ void oled_task_user(void) { #endif oled_set_cursor(0, 12); render_icon(); + return false; } oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_270; -} \ No newline at end of file +} diff --git a/keyboards/rgbkb/pan/keymaps/default/keymap.c b/keyboards/rgbkb/pan/keymaps/default/keymap.c index dac385aa4c..1188db837c 100644 --- a/keyboards/rgbkb/pan/keymaps/default/keymap.c +++ b/keyboards/rgbkb/pan/keymaps/default/keymap.c @@ -71,7 +71,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; #ifdef OLED_ENABLE -void oled_task_user(void) { +bool oled_task_user(void) { // Host Keyboard Layer Status oled_write_P(PSTR("RGBKB Pan\n"), false); oled_write_P(PSTR("Layer: "), false); @@ -97,6 +97,8 @@ void oled_task_user(void) { led_t led_state = host_keyboard_led_state(); oled_write_P(led_state.num_lock ? PSTR("Numlock On\n") : PSTR(" \n"), false); oled_write_P(led_state.caps_lock ? PSTR("Capslock On \n") : PSTR(" \n"), false); + + return false; } #endif diff --git a/keyboards/rgbkb/sol/keymaps/brianweyer/keymap.c b/keyboards/rgbkb/sol/keymaps/brianweyer/keymap.c index aa465a6962..d6867ffa9b 100644 --- a/keyboards/rgbkb/sol/keymaps/brianweyer/keymap.c +++ b/keyboards/rgbkb/sol/keymaps/brianweyer/keymap.c @@ -260,11 +260,13 @@ static void render_status(void) { oled_write_P(led_usb_state & (1< ANIM_FRAME_DURATION) && (splash_dur_counter < SPLASH_DUR)) @@ -348,6 +348,7 @@ void oled_task_user(void) } + return false; } // Process the extra/extended keycode functionality diff --git a/keyboards/rocketboard_16/keymaps/via/keymap.c b/keyboards/rocketboard_16/keymaps/via/keymap.c index 050ab9f5b1..4ce537737b 100644 --- a/keyboards/rocketboard_16/keymaps/via/keymap.c +++ b/keyboards/rocketboard_16/keymaps/via/keymap.c @@ -209,7 +209,7 @@ static void render_logo(uint8_t startX, uint8_t startY) oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_180; } -void oled_task_user(void) +bool oled_task_user(void) { // Playing the animation if((timer_elapsed32(anim_timer) > ANIM_FRAME_DURATION) && (splash_dur_counter < SPLASH_DUR)) @@ -348,6 +348,7 @@ void oled_task_user(void) } + return false; } // Process the extra/extended keycode functionality diff --git a/keyboards/rubi/lib/oled.c b/keyboards/rubi/lib/oled.c index d48d27323c..9534cdd9b7 100644 --- a/keyboards/rubi/lib/oled.c +++ b/keyboards/rubi/lib/oled.c @@ -239,7 +239,8 @@ void render_frame(void) { } } -__attribute__((weak)) void oled_task_user(void) { +bool oled_task_kb(void) { + if (!oled_task_user()) { return false; } if (timer_elapsed(oled_frame_timer) > OLED_FRAME_TIMEOUT) { oled_clear(); oled_frame_timer = timer_read(); @@ -259,9 +260,10 @@ __attribute__((weak)) void oled_task_user(void) { } else { oled_mode = OLED_MODE_DEFAULT; } + return false; } -oled_rotation_t oled_init_user(oled_rotation_t rotation) { +oled_rotation_t oled_init_kb(oled_rotation_t rotation) { oled_logo_timer = timer_read(); oled_frame_timer = timer_read(); return rotation; diff --git a/keyboards/sawnsprojects/satxri6key/keymaps/via/keymap.c b/keyboards/sawnsprojects/satxri6key/keymaps/via/keymap.c index e09ef997fe..0a2bdb39dc 100644 --- a/keyboards/sawnsprojects/satxri6key/keymaps/via/keymap.c +++ b/keyboards/sawnsprojects/satxri6key/keymaps/via/keymap.c @@ -145,7 +145,7 @@ static void render_anim(void) { } // Used to draw on to the oled screen -void oled_task_user(void) { +bool oled_task_user(void) { render_anim(); // renders pixelart oled_set_cursor(0, 0); // sets cursor to (row, column) using charactar spacing (5 rows on 128x32 screen, anything more will overflow back to the top) @@ -160,5 +160,6 @@ void oled_task_user(void) { led_t led_state = host_keyboard_led_state(); // caps lock stuff, prints CAPS on new line if caps led is on oled_set_cursor(0, 1); oled_write_P(led_state.caps_lock ? PSTR("CAPS") : PSTR(" "), false); + return false; } #endif diff --git a/keyboards/sendyyeah/pix/keymaps/default/keymap.c b/keyboards/sendyyeah/pix/keymaps/default/keymap.c index ee98aedd8a..bcaf52d53b 100644 --- a/keyboards/sendyyeah/pix/keymaps/default/keymap.c +++ b/keyboards/sendyyeah/pix/keymaps/default/keymap.c @@ -174,7 +174,7 @@ void draw_brightness_icon(int key_position, int row) { oled_write_P(ICON_BRIGHTNESS_1, false); } -void oled_task_user(void) { +bool oled_task_user(void) { // Host Keyboard Layer Status static const char PROGMEM ICON_LAYER[] = {0x80, 0x81, 0x82, 0x83, 0}; static const char PROGMEM ICON_ENCODER[] = {0x84, 0x85, 0x86, 0x87, 0}; @@ -229,6 +229,7 @@ void oled_task_user(void) { break; } + return false; } #endif diff --git a/keyboards/sendyyeah/pix/keymaps/via/keymap.c b/keyboards/sendyyeah/pix/keymaps/via/keymap.c index ee98aedd8a..bcaf52d53b 100644 --- a/keyboards/sendyyeah/pix/keymaps/via/keymap.c +++ b/keyboards/sendyyeah/pix/keymaps/via/keymap.c @@ -174,7 +174,7 @@ void draw_brightness_icon(int key_position, int row) { oled_write_P(ICON_BRIGHTNESS_1, false); } -void oled_task_user(void) { +bool oled_task_user(void) { // Host Keyboard Layer Status static const char PROGMEM ICON_LAYER[] = {0x80, 0x81, 0x82, 0x83, 0}; static const char PROGMEM ICON_ENCODER[] = {0x84, 0x85, 0x86, 0x87, 0}; @@ -229,6 +229,7 @@ void oled_task_user(void) { break; } + return false; } #endif diff --git a/keyboards/setta21/keymaps/salicylic/keymap.c b/keyboards/setta21/keymaps/salicylic/keymap.c index 568afd1339..06fa89c9c7 100644 --- a/keyboards/setta21/keymaps/salicylic/keymap.c +++ b/keyboards/setta21/keymaps/salicylic/keymap.c @@ -190,8 +190,9 @@ void render_status(void) { render_layer_state(); } -void oled_task_user(void) { +bool oled_task_user(void) { render_status(); // Renders the current keyboard state (layer, lock, caps, scroll, etc) + return false; } #endif diff --git a/keyboards/sofle/keymaps/default/keymap.c b/keyboards/sofle/keymaps/default/keymap.c index a64d274b55..6c078a1292 100644 --- a/keyboards/sofle/keymaps/default/keymap.c +++ b/keyboards/sofle/keymaps/default/keymap.c @@ -200,12 +200,13 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return rotation; } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { print_status_narrow(); } else { render_logo(); } + return false; } #endif diff --git a/keyboards/sofle/keymaps/devdev/keymap.c b/keyboards/sofle/keymaps/devdev/keymap.c index a0945b28f0..b805f7f176 100644 --- a/keyboards/sofle/keymaps/devdev/keymap.c +++ b/keyboards/sofle/keymaps/devdev/keymap.c @@ -465,12 +465,13 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return rotation; } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { print_status_narrow(); } else { render_logo(); } + return false; } #endif diff --git a/keyboards/sofle/keymaps/helltm/keymap.c b/keyboards/sofle/keymaps/helltm/keymap.c index 3e1bcc82ea..8d6289af42 100644 --- a/keyboards/sofle/keymaps/helltm/keymap.c +++ b/keyboards/sofle/keymaps/helltm/keymap.c @@ -392,7 +392,7 @@ static void print_status_narrow(void) { oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_270; } -void oled_task_user(void) { +bool oled_task_user(void) { /* KEYBOARD PET VARIABLES START */ current_wpm = get_current_wpm(); @@ -405,6 +405,7 @@ void oled_task_user(void) { } else { print_logo_narrow(); } + return false; } #endif diff --git a/keyboards/sofle/keymaps/j4ckofalltrades/oled.c b/keyboards/sofle/keymaps/j4ckofalltrades/oled.c index 46c791b053..de561bd0fa 100644 --- a/keyboards/sofle/keymaps/j4ckofalltrades/oled.c +++ b/keyboards/sofle/keymaps/j4ckofalltrades/oled.c @@ -65,12 +65,13 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return rotation; } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { print_status_narrow(); } else { render_logo(); } + return false; } #endif diff --git a/keyboards/sofle/keymaps/killmaster/keymap.c b/keyboards/sofle/keymaps/killmaster/keymap.c index 34c07f3c45..71db0fc853 100644 --- a/keyboards/sofle/keymaps/killmaster/keymap.c +++ b/keyboards/sofle/keymaps/killmaster/keymap.c @@ -211,12 +211,13 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return rotation; } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { print_status_narrow(); } else { render_logo(); } + return false; } diff --git a/keyboards/sofle/keymaps/rgb_default/keymap.c b/keyboards/sofle/keymaps/rgb_default/keymap.c index 13edbc5207..1972e8bc6a 100644 --- a/keyboards/sofle/keymaps/rgb_default/keymap.c +++ b/keyboards/sofle/keymaps/rgb_default/keymap.c @@ -465,12 +465,13 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return rotation; } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { print_status_narrow(); } else { render_logo(); } + return false; } #endif diff --git a/keyboards/sofle/keymaps/via/oled.c b/keyboards/sofle/keymaps/via/oled.c index 8a230f0001..74f06cedc5 100644 --- a/keyboards/sofle/keymaps/via/oled.c +++ b/keyboards/sofle/keymaps/via/oled.c @@ -73,12 +73,13 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return rotation; } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { print_status_narrow(); } else { render_logo(); } + return false; } #endif diff --git a/keyboards/spaceman/pancake/rev2/rev2.c b/keyboards/spaceman/pancake/rev2/rev2.c index cd13099a9c..9b186192c5 100644 --- a/keyboards/spaceman/pancake/rev2/rev2.c +++ b/keyboards/spaceman/pancake/rev2/rev2.c @@ -17,10 +17,14 @@ #ifdef OLED_ENABLE -__attribute__((weak)) oled_rotation_t oled_init_user(oled_rotation_t rotation) { +oled_rotation_t oled_init_kb(oled_rotation_t rotation) { return OLED_ROTATION_270; } -__attribute__((weak)) void oled_task_user(void) { + +bool oled_task_kb(void) { + if (!oled_task_user()) { + return false; + } static const char PROGMEM pancake_logo[] = { 0x00, 0x00, 0x3e, 0x0a, 0x04, 0x00, 0x3c, 0x0a, 0x3c, 0x00, 0x3e, 0x0c, 0x18, 0x3e, 0x00, 0x3e, 0x22, 0x22, 0x00, 0x3c, 0x0a, 0x3c, 0x00, 0x3e, 0x08, 0x36, 0x00, 0x3e, 0x2a, 0x22, 0x00, 0x00, @@ -50,5 +54,6 @@ __attribute__((weak)) void oled_task_user(void) { oled_write_ln_P(PSTR("Undefined"), false); break; } + return false; } #endif diff --git a/keyboards/splitkb/kyria/keymaps/asapjockey/keymap.c b/keyboards/splitkb/kyria/keymaps/asapjockey/keymap.c index 8ba098eed2..baf46eeac6 100644 --- a/keyboards/splitkb/kyria/keymaps/asapjockey/keymap.c +++ b/keyboards/splitkb/kyria/keymaps/asapjockey/keymap.c @@ -246,12 +246,13 @@ static void render_status(void) { oled_write_P(led_state.scroll_lock ? PSTR("SCRLCK ") : PSTR(" "), false); } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { render_status(); // Renders the current keyboard state (layer, lock, caps, scroll, etc) } else { render_kyria_logo(); } + return false; } #endif diff --git a/keyboards/splitkb/kyria/keymaps/benji/keymap.c b/keyboards/splitkb/kyria/keymaps/benji/keymap.c index a670b77611..1ad50e5fc4 100644 --- a/keyboards/splitkb/kyria/keymaps/benji/keymap.c +++ b/keyboards/splitkb/kyria/keymaps/benji/keymap.c @@ -200,12 +200,13 @@ static void render_status(void) { oled_write_P(led_usb_state.scroll_lock ? PSTR("SCRLCK ") : PSTR(" "), false); } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { render_status(); // Renders the current keyboard state (layer, lock, caps, scroll, etc) } else { render_kyria_logo(); } + return false; } #endif diff --git a/keyboards/splitkb/kyria/keymaps/cjuniet/keymap.c b/keyboards/splitkb/kyria/keymaps/cjuniet/keymap.c index d0620309b6..7e485a7be8 100644 --- a/keyboards/splitkb/kyria/keymaps/cjuniet/keymap.c +++ b/keyboards/splitkb/kyria/keymaps/cjuniet/keymap.c @@ -117,11 +117,12 @@ static void render_status(void) { oled_write_ln_P(PSTR(" Layer\n"), false); } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { render_status(); render_status_bar(); } else { render_kyria_logo(); } + return false; } diff --git a/keyboards/splitkb/kyria/keymaps/cwebster2/keymap.c b/keyboards/splitkb/kyria/keymaps/cwebster2/keymap.c index 25a58038dc..1abf865010 100644 --- a/keyboards/splitkb/kyria/keymaps/cwebster2/keymap.c +++ b/keyboards/splitkb/kyria/keymaps/cwebster2/keymap.c @@ -391,12 +391,13 @@ static void render_status(void) { } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { render_status(); // Renders the current keyboard state (layer, lock, caps, scroll, etc) } else { render_logo(); } + return false; } #endif diff --git a/keyboards/splitkb/kyria/keymaps/default/keymap.c b/keyboards/splitkb/kyria/keymaps/default/keymap.c index 243104afc6..20cb279ff6 100644 --- a/keyboards/splitkb/kyria/keymaps/default/keymap.c +++ b/keyboards/splitkb/kyria/keymaps/default/keymap.c @@ -226,7 +226,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { #ifdef OLED_ENABLE oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_180; } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { // QMK Logo and version information // clang-format off @@ -287,6 +287,7 @@ void oled_task_user(void) { // clang-format on oled_write_raw_P(kyria_logo, sizeof(kyria_logo)); } + return false; } #endif diff --git a/keyboards/splitkb/kyria/keymaps/ghidalgo93/keymap.c b/keyboards/splitkb/kyria/keymaps/ghidalgo93/keymap.c index 67881b03e6..df542977a1 100644 --- a/keyboards/splitkb/kyria/keymaps/ghidalgo93/keymap.c +++ b/keyboards/splitkb/kyria/keymaps/ghidalgo93/keymap.c @@ -214,12 +214,13 @@ static void render_status(void) { oled_write_P(led_state.scroll_lock ? PSTR("SCRLCK ") : PSTR(" "), false); } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { render_status(); // Renders the current keyboard state (layer, lock, caps, scroll, etc) } else { render_kyria_logo(); } + return false; } #endif diff --git a/keyboards/splitkb/kyria/keymaps/gotham/keymap.c b/keyboards/splitkb/kyria/keymaps/gotham/keymap.c index 498e1c1124..5fdeb494e6 100644 --- a/keyboards/splitkb/kyria/keymaps/gotham/keymap.c +++ b/keyboards/splitkb/kyria/keymaps/gotham/keymap.c @@ -106,7 +106,10 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { #ifdef OLED_ENABLE oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_180; } -void oled_task_user(void) { render_status(); } +bool oled_task_user(void) { + render_status(); + return false; +} #endif #ifdef ENCODER_ENABLE diff --git a/keyboards/splitkb/kyria/keymaps/j-inc/keymap.c b/keyboards/splitkb/kyria/keymaps/j-inc/keymap.c index 6121dd0f87..af583a607f 100644 --- a/keyboards/splitkb/kyria/keymaps/j-inc/keymap.c +++ b/keyboards/splitkb/kyria/keymaps/j-inc/keymap.c @@ -317,7 +317,7 @@ static void render_anim(void) { // oled_write_raw_P(skull, 801); // } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { //render_skull(); //oled_set_cursor(7,6); @@ -335,6 +335,7 @@ void oled_task_user(void) { oled_write(wpm_str, false); } + return false; } #endif diff --git a/keyboards/splitkb/kyria/keymaps/jhelvy/keymap.c b/keyboards/splitkb/kyria/keymaps/jhelvy/keymap.c index a9c8db28d5..e78e15ea3e 100644 --- a/keyboards/splitkb/kyria/keymaps/jhelvy/keymap.c +++ b/keyboards/splitkb/kyria/keymaps/jhelvy/keymap.c @@ -161,12 +161,13 @@ static void render_status(void) { } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { render_status(); // Renders the current keyboard state (layer, lock, caps, scroll, etc) } else { render_kyria_logo(); } + return false; } #endif diff --git a/keyboards/splitkb/kyria/keymaps/john-ezra/oled.c b/keyboards/splitkb/kyria/keymaps/john-ezra/oled.c index fe9c96d556..732cca8f7b 100644 --- a/keyboards/splitkb/kyria/keymaps/john-ezra/oled.c +++ b/keyboards/splitkb/kyria/keymaps/john-ezra/oled.c @@ -478,12 +478,13 @@ void render_status_secondary(void) { render_wpm_graph(); } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { render_status_main(); // Renders the current keyboard state (layer, lock, caps, scroll, etc) } else { render_status_secondary(); } + return false; } #endif diff --git a/keyboards/splitkb/kyria/keymaps/mattir/keymap.c b/keyboards/splitkb/kyria/keymaps/mattir/keymap.c index 89efaec559..7b567cbd60 100644 --- a/keyboards/splitkb/kyria/keymaps/mattir/keymap.c +++ b/keyboards/splitkb/kyria/keymaps/mattir/keymap.c @@ -193,12 +193,13 @@ static void render_status(void) { } } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { render_status(); // Renders the current keyboard layer } else { render_mattir_logo(); } + return false; } #endif diff --git a/keyboards/splitkb/kyria/keymaps/ninjonas/oled.c b/keyboards/splitkb/kyria/keymaps/ninjonas/oled.c index 216f475347..813328aa0c 100644 --- a/keyboards/splitkb/kyria/keymaps/ninjonas/oled.c +++ b/keyboards/splitkb/kyria/keymaps/ninjonas/oled.c @@ -198,12 +198,13 @@ static void render_status(void) { render_mod_state(get_mods()|get_oneshot_mods()); } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { render_status(); } else { render_logo(); oled_scroll_left(); } + return false; } #endif diff --git a/keyboards/splitkb/kyria/keymaps/plattfot/keymap.c b/keyboards/splitkb/kyria/keymaps/plattfot/keymap.c index 8b4b0c2630..222759d60d 100644 --- a/keyboards/splitkb/kyria/keymaps/plattfot/keymap.c +++ b/keyboards/splitkb/kyria/keymaps/plattfot/keymap.c @@ -327,12 +327,13 @@ static void render_status(void) { oled_write_P(led_state.scroll_lock ? PSTR("SCRLCK ") : PSTR(" "), false); } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { render_status(); // Renders the current keyboard state (layer, lock, caps, scroll, etc) } else { render_static_info(); } + return false; } #endif diff --git a/keyboards/splitkb/kyria/keymaps/shinze/keymap.c b/keyboards/splitkb/kyria/keymaps/shinze/keymap.c index ad9ca4da1d..3483410525 100644 --- a/keyboards/splitkb/kyria/keymaps/shinze/keymap.c +++ b/keyboards/splitkb/kyria/keymaps/shinze/keymap.c @@ -216,12 +216,13 @@ static void render_status(void) { oled_write_P(IS_LED_ON(led_usb_state, USB_LED_SCROLL_LOCK) ? PSTR("SCRLCK ") : PSTR(" "), false); } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { render_status(); // Renders the current keyboard state (layer, lock, caps, scroll, etc) } else { render_kyria_logo(); } + return false; } #endif diff --git a/keyboards/splitkb/kyria/keymaps/tessachka/keymap.c b/keyboards/splitkb/kyria/keymaps/tessachka/keymap.c index 51a91fc915..16d2bad8a4 100644 --- a/keyboards/splitkb/kyria/keymaps/tessachka/keymap.c +++ b/keyboards/splitkb/kyria/keymaps/tessachka/keymap.c @@ -231,11 +231,12 @@ static void render_status(void) { oled_write_P(IS_LED_ON(led_usb_state, USB_LED_SCROLL_LOCK) ? PSTR("SCRLCK ") : PSTR(" "), false); } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { render_status(); // Renders the current keyboard state (layer, lock, caps, scroll, etc) } else { render_kyria_logo(); } + return false; } #endif diff --git a/keyboards/splitkb/kyria/keymaps/thomasbaart/keymap.c b/keyboards/splitkb/kyria/keymaps/thomasbaart/keymap.c index 24be4135ea..0a4f1887c3 100644 --- a/keyboards/splitkb/kyria/keymaps/thomasbaart/keymap.c +++ b/keyboards/splitkb/kyria/keymaps/thomasbaart/keymap.c @@ -298,12 +298,13 @@ static void render_status(void) { oled_write_P(IS_LED_ON(led_usb_state, USB_LED_SCROLL_LOCK) ? PSTR("SCRLCK ") : PSTR(" "), false); } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { render_status(); // Renders the current keyboard state (layer, lock, caps, scroll, etc) } else { render_kyria_logo(); } + return false; } #endif diff --git a/keyboards/splitkb/kyria/keymaps/via/keymap.c b/keyboards/splitkb/kyria/keymaps/via/keymap.c index 730b5028cc..6835652a70 100644 --- a/keyboards/splitkb/kyria/keymaps/via/keymap.c +++ b/keyboards/splitkb/kyria/keymaps/via/keymap.c @@ -191,7 +191,7 @@ bool encoder_update_user(uint8_t index, bool clockwise) { #endif #ifdef OLED_ENABLE -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { // QMK Logo and version information // clang-format off @@ -244,5 +244,6 @@ void oled_task_user(void) { // clang-format on oled_write_raw_P(kyria_logo, sizeof(kyria_logo)); } + return false; } #endif diff --git a/keyboards/splitkb/kyria/keymaps/winternebs/keymap.c b/keyboards/splitkb/kyria/keymaps/winternebs/keymap.c index 0829030310..4f0df9354f 100755 --- a/keyboards/splitkb/kyria/keymaps/winternebs/keymap.c +++ b/keyboards/splitkb/kyria/keymaps/winternebs/keymap.c @@ -695,7 +695,7 @@ static void render_logo(void) { oled_set_cursor(6,6); oled_write_P(PSTR(" play asc "), false); } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { render_anim(); oled_set_cursor(0,7); @@ -728,5 +728,6 @@ void oled_task_user(void) { oled_scroll_left(); } + return false; } #endif diff --git a/keyboards/splitkb/kyria/keymaps/zigotica/oled.c b/keyboards/splitkb/kyria/keymaps/zigotica/oled.c index 46bb2c3cea..ba1415deed 100644 --- a/keyboards/splitkb/kyria/keymaps/zigotica/oled.c +++ b/keyboards/splitkb/kyria/keymaps/zigotica/oled.c @@ -77,11 +77,11 @@ static void render_status(void) { oled_write_P(led_state.scroll_lock ? PSTR("SCRLCK ") : PSTR(" "), false); } -void oled_task_user(void) { +bool oled_task_user(void) { if (!is_keyboard_left()) { render_status(); // Renders the current keyboard state (layer, lock, caps, scroll, etc) } else { render_kyria_logo(); } + return false; } - diff --git a/keyboards/splitkb/kyria/rev1/rev1.c b/keyboards/splitkb/kyria/rev1/rev1.c index ac82f7373d..b2641fb40e 100644 --- a/keyboards/splitkb/kyria/rev1/rev1.c +++ b/keyboards/splitkb/kyria/rev1/rev1.c @@ -56,9 +56,14 @@ led_config_t g_led_config = { { #endif #ifdef OLED_ENABLE -__attribute__((weak)) oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_180; } +oled_rotation_t oled_init_kb(oled_rotation_t rotation) { + return OLED_ROTATION_180; +} -__attribute__((weak)) void oled_task_user(void) { +bool oled_task_kb(void) { + if (!oled_task_user()) { + return false; + } if (is_keyboard_master()) { // QMK Logo and version information // clang-format off @@ -119,6 +124,7 @@ __attribute__((weak)) void oled_task_user(void) { // clang-format on oled_write_raw_P(kyria_logo, sizeof(kyria_logo)); } + return false; } #endif diff --git a/keyboards/splitkb/zima/keymaps/drashna/keymap.c b/keyboards/splitkb/zima/keymaps/drashna/keymap.c index 29d03ec918..b3133c601b 100644 --- a/keyboards/splitkb/zima/keymaps/drashna/keymap.c +++ b/keyboards/splitkb/zima/keymaps/drashna/keymap.c @@ -78,10 +78,10 @@ void render_user_status(void) { void keyboard_post_init_user(void) { oled_scroll_set_speed(0); } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_asleep) { oled_off(); - return; + return false;; } if (timer_elapsed32(oled_timer) < 30000) { @@ -131,6 +131,7 @@ void oled_task_user(void) { oled_off(); } } + return false; } void suspend_power_down_user(void) { is_asleep = true; } diff --git a/keyboards/splitkb/zima/zima.c b/keyboards/splitkb/zima/zima.c index 6570f3449c..f39e3a39eb 100644 --- a/keyboards/splitkb/zima/zima.c +++ b/keyboards/splitkb/zima/zima.c @@ -35,12 +35,17 @@ void suspend_wakeup_init_kb(void) { suspend_wakeup_init_user(); } -__attribute__((weak)) oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_180; } +oled_rotation_t oled_init_kb(oled_rotation_t rotation) { + return OLED_ROTATION_180; +} -__attribute__((weak)) void oled_task_user(void) { +bool oled_task_kb(void) { + if (!oled_task_user()) { + return false; + } if (is_asleep) { oled_off(); - return; + return false; } if (timer_elapsed32(oled_timer) < 30000) { @@ -83,6 +88,7 @@ __attribute__((weak)) void oled_task_user(void) { oled_off(); } } + return false; } bool process_record_kb(uint16_t keycode, keyrecord_t* record) { diff --git a/keyboards/suihankey/alpha/keymaps/default/keymap.c b/keyboards/suihankey/alpha/keymaps/default/keymap.c index 79c4c3df6e..b682f0f15d 100644 --- a/keyboards/suihankey/alpha/keymaps/default/keymap.c +++ b/keyboards/suihankey/alpha/keymaps/default/keymap.c @@ -56,7 +56,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; #ifdef OLED_ENABLE -void oled_task_user(void) { +bool oled_task_user(void) { oled_write_P(PSTR("Layer: "), false); switch (biton32(layer_state)) { case BASE: @@ -80,5 +80,7 @@ void oled_task_user(void) { oled_write_P(IS_HOST_LED_ON(USB_LED_NUM_LOCK) ? PSTR("NUMLCK ") : PSTR(" "), false); oled_write_P(IS_HOST_LED_ON(USB_LED_CAPS_LOCK) ? PSTR("CAPLCK ") : PSTR(" "), false); oled_write_P(IS_HOST_LED_ON(USB_LED_SCROLL_LOCK) ? PSTR("SCRLCK ") : PSTR(" "), false); + + return false; } #endif diff --git a/keyboards/suihankey/rev1/keymaps/default/keymap.c b/keyboards/suihankey/rev1/keymaps/default/keymap.c index 79c4c3df6e..b682f0f15d 100644 --- a/keyboards/suihankey/rev1/keymaps/default/keymap.c +++ b/keyboards/suihankey/rev1/keymaps/default/keymap.c @@ -56,7 +56,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; #ifdef OLED_ENABLE -void oled_task_user(void) { +bool oled_task_user(void) { oled_write_P(PSTR("Layer: "), false); switch (biton32(layer_state)) { case BASE: @@ -80,5 +80,7 @@ void oled_task_user(void) { oled_write_P(IS_HOST_LED_ON(USB_LED_NUM_LOCK) ? PSTR("NUMLCK ") : PSTR(" "), false); oled_write_P(IS_HOST_LED_ON(USB_LED_CAPS_LOCK) ? PSTR("CAPLCK ") : PSTR(" "), false); oled_write_P(IS_HOST_LED_ON(USB_LED_SCROLL_LOCK) ? PSTR("SCRLCK ") : PSTR(" "), false); + + return false; } #endif diff --git a/keyboards/takashicompany/endzone34/keymaps/default/keymap.c b/keyboards/takashicompany/endzone34/keymaps/default/keymap.c index eb0ea5029c..e4bcb3625a 100644 --- a/keyboards/takashicompany/endzone34/keymaps/default/keymap.c +++ b/keyboards/takashicompany/endzone34/keymaps/default/keymap.c @@ -77,7 +77,7 @@ static void render_logo(void) { oled_write_raw_P(my_logo, sizeof(my_logo)); } -void oled_task_user(void) { +bool oled_task_user(void) { render_logo(); @@ -108,5 +108,6 @@ void oled_task_user(void) { oled_write_ln(count_str, false); + return false; } #endif diff --git a/keyboards/tau4/keymaps/default/keymap.c b/keyboards/tau4/keymaps/default/keymap.c index 1a1e5b38ce..6c1b2342a2 100755 --- a/keyboards/tau4/keymaps/default/keymap.c +++ b/keyboards/tau4/keymaps/default/keymap.c @@ -140,7 +140,8 @@ static void render_status(void) { } } -void oled_task_user(void) { +bool oled_task_user(void) { render_status(); + return false; } #endif diff --git a/keyboards/tender/macrowo_pad/keymaps/default/keymap.c b/keyboards/tender/macrowo_pad/keymaps/default/keymap.c index fc3a45c982..685fbd7e04 100644 --- a/keyboards/tender/macrowo_pad/keymaps/default/keymap.c +++ b/keyboards/tender/macrowo_pad/keymaps/default/keymap.c @@ -50,7 +50,8 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_270; } -void oled_task_user(void) { +bool oled_task_user(void) { oled_write_P(PSTR("OWO\nWhat's\nthis?"), false); + return false; } #endif diff --git a/keyboards/tender/macrowo_pad/keymaps/via/keymap.c b/keyboards/tender/macrowo_pad/keymaps/via/keymap.c index 84c7e3e447..e4e2c131ed 100644 --- a/keyboards/tender/macrowo_pad/keymaps/via/keymap.c +++ b/keyboards/tender/macrowo_pad/keymaps/via/keymap.c @@ -58,7 +58,8 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_270; } -void oled_task_user(void) { +bool oled_task_user(void) { oled_write_P(PSTR("OWO\nWhat's\nthis?"), false); + return false; } #endif diff --git a/keyboards/tkc/m0lly/keymaps/default/keymap.c b/keyboards/tkc/m0lly/keymaps/default/keymap.c index 846429674f..bb065fa239 100644 --- a/keyboards/tkc/m0lly/keymaps/default/keymap.c +++ b/keyboards/tkc/m0lly/keymaps/default/keymap.c @@ -68,7 +68,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; #ifdef OLED_ENABLE -void oled_task_user(void) { +bool oled_task_user(void) { oled_write_P(PSTR("M0lly\n"),false); // Layer status @@ -91,5 +91,7 @@ void oled_task_user(void) { oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false); oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false); oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false); + + return false; } #endif diff --git a/keyboards/tkc/m0lly/keymaps/via/keymap.c b/keyboards/tkc/m0lly/keymaps/via/keymap.c index 333e29f4ec..40f75b4579 100644 --- a/keyboards/tkc/m0lly/keymaps/via/keymap.c +++ b/keyboards/tkc/m0lly/keymaps/via/keymap.c @@ -86,7 +86,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; #ifdef OLED_ENABLE -void oled_task_user(void) { +bool oled_task_user(void) { oled_write_P(PSTR("M0lly\n"),false); // Layer Status @@ -115,5 +115,7 @@ void oled_task_user(void) { oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false); oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false); oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false); + + return false; } #endif diff --git a/keyboards/tkc/tkc1800/keymaps/default/keymap.c b/keyboards/tkc/tkc1800/keymaps/default/keymap.c index 762d5c4ed6..29a19e680d 100644 --- a/keyboards/tkc/tkc1800/keymaps/default/keymap.c +++ b/keyboards/tkc/tkc1800/keymaps/default/keymap.c @@ -80,7 +80,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { #ifdef OLED_ENABLE -void oled_task_user(void) { +bool oled_task_user(void) { oled_write_P(PSTR("TKC1800\n"),false); // Host Keyboard Layer Status oled_write_P(PSTR("Layer: "), false); @@ -102,5 +102,7 @@ void oled_task_user(void) { oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false); oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false); oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false); + + return false; } #endif diff --git a/keyboards/tkc/tkc1800/keymaps/smt/keymap.c b/keyboards/tkc/tkc1800/keymaps/smt/keymap.c index dd552cee86..9eceaa5bda 100644 --- a/keyboards/tkc/tkc1800/keymaps/smt/keymap.c +++ b/keyboards/tkc/tkc1800/keymaps/smt/keymap.c @@ -145,7 +145,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } #ifdef OLED_ENABLE -void oled_task_user(void) { +bool oled_task_user(void) { oled_write_P(PSTR("TKC1800\n"),false); // Host Keyboard Layer Status oled_write_P(PSTR("Layer: "), false); @@ -173,5 +173,7 @@ void oled_task_user(void) { oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false); oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false); oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false); + + return false; } #endif diff --git a/keyboards/tkc/tkc1800/keymaps/via/keymap.c b/keyboards/tkc/tkc1800/keymaps/via/keymap.c index d05a1d420c..74ab1149f6 100644 --- a/keyboards/tkc/tkc1800/keymaps/via/keymap.c +++ b/keyboards/tkc/tkc1800/keymaps/via/keymap.c @@ -98,7 +98,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; #ifdef OLED_ENABLE -void oled_task_user(void) { +bool oled_task_user(void) { oled_write_P(PSTR("TKC1800\n"),false); // Host Keyboard Layer Status oled_write_P(PSTR("Layer: "), false); @@ -126,5 +126,7 @@ void oled_task_user(void) { oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false); oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false); oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false); + + return false; } #endif diff --git a/keyboards/tkc/tkc1800/keymaps/wkl/keymap.c b/keyboards/tkc/tkc1800/keymaps/wkl/keymap.c index da8e8b9320..9349af7bcd 100644 --- a/keyboards/tkc/tkc1800/keymaps/wkl/keymap.c +++ b/keyboards/tkc/tkc1800/keymaps/wkl/keymap.c @@ -62,7 +62,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; #ifdef OLED_ENABLE -void oled_task_user(void) { +bool oled_task_user(void) { oled_write_P(PSTR("TKC1800\n"),false); // Host Keyboard Layer Status oled_write_P(PSTR("Layer: "), false); @@ -84,5 +84,7 @@ void oled_task_user(void) { oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false); oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false); oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false); + + return false; } #endif diff --git a/keyboards/tkc/tkc1800/keymaps/yanfali/keymap.c b/keyboards/tkc/tkc1800/keymaps/yanfali/keymap.c index cee80a48c7..2ebfe33c3d 100644 --- a/keyboards/tkc/tkc1800/keymaps/yanfali/keymap.c +++ b/keyboards/tkc/tkc1800/keymaps/yanfali/keymap.c @@ -62,7 +62,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; #ifdef OLED_ENABLE -void oled_task_user(void) { +bool oled_task_user(void) { oled_write_P(PSTR("TKC1800\n"),false); // Host Keyboard Layer Status oled_write_P(PSTR("Layer: "), false); @@ -84,5 +84,7 @@ void oled_task_user(void) { oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false); oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false); oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false); + + return false; } #endif diff --git a/keyboards/tkw/grandiceps/keymaps/default/keymap.c b/keyboards/tkw/grandiceps/keymaps/default/keymap.c index 14ae9619ea..e3de33616e 100644 --- a/keyboards/tkw/grandiceps/keymaps/default/keymap.c +++ b/keyboards/tkw/grandiceps/keymaps/default/keymap.c @@ -416,12 +416,13 @@ static void print_status_narrow(void) { oled_write_P(PSTR("\n\n"), false); } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { print_status_narrow(); } else { render_logo(); } + return false; } oled_rotation_t oled_init_user(oled_rotation_t rotation) { diff --git a/keyboards/torn/bongocat.c b/keyboards/torn/bongocat.c index 00f5cda6ac..21322c9536 100644 --- a/keyboards/torn/bongocat.c +++ b/keyboards/torn/bongocat.c @@ -34,7 +34,10 @@ static bool show_logo = true; __attribute__((weak)) extern const char PROGMEM bongocat_logo[]; -void oled_task_user(void) { +bool oled_task_kb(void) { + if (!oled_task_user()) { + return false; + } // clang-format off static const char PROGMEM idle[][FRAME_SIZE] = { @@ -347,7 +350,7 @@ void oled_task_user(void) { oled_off(); anim_timer = 0; show_logo = true; - return; + return false; } if (timer_elapsed32(anim_timer) > FRAME_DURATION) { @@ -369,6 +372,7 @@ void oled_task_user(void) { } current_frame++; } + return false; } bool process_record_kb(uint16_t keycode, keyrecord_t *record) { diff --git a/keyboards/treadstone48/keymaps/default/keymap.c b/keyboards/treadstone48/keymaps/default/keymap.c index fc53d7e578..f1b37364b5 100644 --- a/keyboards/treadstone48/keymaps/default/keymap.c +++ b/keyboards/treadstone48/keymaps/default/keymap.c @@ -167,13 +167,14 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return rotation; } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { render_status(); } else { render_logo(); } + return false; } #else diff --git a/keyboards/treadstone48/keymaps/like_jis/keymap.c b/keyboards/treadstone48/keymaps/like_jis/keymap.c index b86ab5cdbd..1e90a2416e 100644 --- a/keyboards/treadstone48/keymaps/like_jis/keymap.c +++ b/keyboards/treadstone48/keymaps/like_jis/keymap.c @@ -167,13 +167,14 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return rotation; } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { render_status(); } else { render_logo(); } + return false; } #else diff --git a/keyboards/treadstone48/rev1/keymaps/like_jis_rs/keymap.c b/keyboards/treadstone48/rev1/keymaps/like_jis_rs/keymap.c index a6a52e0678..e1f0835881 100644 --- a/keyboards/treadstone48/rev1/keymaps/like_jis_rs/keymap.c +++ b/keyboards/treadstone48/rev1/keymaps/like_jis_rs/keymap.c @@ -219,13 +219,14 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return rotation; } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { render_status(); } else { render_logo(); } + return false; } #else diff --git a/keyboards/ungodly/launch_pad/keymaps/default/keymap.c b/keyboards/ungodly/launch_pad/keymaps/default/keymap.c index 42b6b397ca..43e0e72bdc 100644 --- a/keyboards/ungodly/launch_pad/keymaps/default/keymap.c +++ b/keyboards/ungodly/launch_pad/keymaps/default/keymap.c @@ -274,7 +274,7 @@ static void render_light_logo(void) { oled_write_raw_P(light_logo, sizeof(light_logo)); } -void oled_task_user(void) { +bool oled_task_user(void) { switch (get_highest_layer(layer_state)) { case 0: render_rocket_logo(); @@ -290,5 +290,6 @@ void oled_task_user(void) { oled_write_ln_P(PSTR(" UND"), false); break; } + return false; } #endif diff --git a/keyboards/ungodly/launch_pad/keymaps/via/keymap.c b/keyboards/ungodly/launch_pad/keymaps/via/keymap.c index 083bb8b815..0854715bef 100644 --- a/keyboards/ungodly/launch_pad/keymaps/via/keymap.c +++ b/keyboards/ungodly/launch_pad/keymaps/via/keymap.c @@ -273,7 +273,7 @@ static void render_light_logo(void) { oled_write_raw_P(light_logo, sizeof(light_logo)); } -void oled_task_user(void) { +bool oled_task_user(void) { switch (get_highest_layer(layer_state)) { case 0: render_rocket_logo(); @@ -289,5 +289,6 @@ void oled_task_user(void) { oled_write_ln_P(PSTR(" UND"), false); break; } + return false; } #endif diff --git a/keyboards/ungodly/launch_pad/keymaps/warzone/keymap.c b/keyboards/ungodly/launch_pad/keymaps/warzone/keymap.c index 4f856b9770..63f142d913 100644 --- a/keyboards/ungodly/launch_pad/keymaps/warzone/keymap.c +++ b/keyboards/ungodly/launch_pad/keymaps/warzone/keymap.c @@ -249,7 +249,7 @@ static void render_light_logo(void) { oled_write_raw_P(light_logo, sizeof(light_logo)); } -void oled_task_user(void) { +bool oled_task_user(void) { switch (get_highest_layer(layer_state)) { case 0: render_rocket_logo(); @@ -265,5 +265,6 @@ void oled_task_user(void) { oled_write_ln_P(PSTR(" UND"), false); break; } + return false; } #endif diff --git a/keyboards/uzu42/keymaps/default/keymap.c b/keyboards/uzu42/keymaps/default/keymap.c index 54b944b244..fbed8b0638 100644 --- a/keyboards/uzu42/keymaps/default/keymap.c +++ b/keyboards/uzu42/keymaps/default/keymap.c @@ -197,7 +197,7 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return rotation; } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_keyboard_master()) { // If you want to change the display of OLED, you need to change here oled_write_ln(read_layer_state(), false); @@ -209,6 +209,7 @@ void oled_task_user(void) { } else { oled_write(read_logo(), false); } + return false; } #endif // OLED_ENABLE diff --git a/keyboards/work_louder/work_board/work_board.c b/keyboards/work_louder/work_board/work_board.c index a2722a055a..7a8edc1a9e 100644 --- a/keyboards/work_louder/work_board/work_board.c +++ b/keyboards/work_louder/work_board/work_board.c @@ -34,9 +34,14 @@ bool encoder_update_kb(uint8_t index, bool clockwise) { # ifdef RGB_MATRIX_ENABLE # error Cannot run OLED and Per Key RGB at the same time due to pin conflicts # endif -__attribute__((weak)) oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_90; } +oled_rotation_t oled_init_kb(oled_rotation_t rotation) { + return OLED_ROTATION_90; +} -__attribute__((weak)) void oled_task_user(void) { +bool oled_task_kb(void) { + if (!oled_task_user()) { + return false; + } oled_write_P(PSTR("LAYER"), false); oled_write_P(PSTR("Lower"), layer_state_is(3)); oled_write_P(PSTR("Raise"), layer_state_is(4)); @@ -70,6 +75,8 @@ __attribute__((weak)) void oled_task_user(void) { oled_write_P(logo[0][1], !keymap_config.swap_lctl_lgui); oled_write_P(logo[1][1], keymap_config.swap_lctl_lgui); oled_write_P(PSTR(" NKRO"), keymap_config.nkro); + + return false; } #endif diff --git a/keyboards/yampad/keymaps/default/keymap.c b/keyboards/yampad/keymaps/default/keymap.c index d22eb26177..51d921be3f 100644 --- a/keyboards/yampad/keymaps/default/keymap.c +++ b/keyboards/yampad/keymaps/default/keymap.c @@ -122,7 +122,7 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_270; // flips the display 270 degrees } -void oled_task_user(void) { +bool oled_task_user(void) { // Host Keyboard Layer Status oled_write_P(PSTR("Layer"), false); switch (get_highest_layer(layer_state)) { @@ -159,5 +159,7 @@ void oled_task_user(void) { (uint8_t)(rgblight_get_sat() / RGBLIGHT_SAT_STEP), (uint8_t)(rgblight_get_val() / RGBLIGHT_VAL_STEP)); oled_write(led_buf, false); + + return false; } #endif diff --git a/keyboards/yampad/keymaps/traditional/keymap.c b/keyboards/yampad/keymaps/traditional/keymap.c index 57462c050c..78778cc34b 100644 --- a/keyboards/yampad/keymaps/traditional/keymap.c +++ b/keyboards/yampad/keymaps/traditional/keymap.c @@ -122,7 +122,7 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_270; // flips the display 270 degrees } -void oled_task_user(void) { +bool oled_task_user(void) { // Host Keyboard Layer Status oled_write_P(PSTR("Layer"), false); switch (get_highest_layer(layer_state)) { @@ -159,5 +159,7 @@ void oled_task_user(void) { (uint8_t)(rgblight_get_sat() / RGBLIGHT_SAT_STEP), (uint8_t)(rgblight_get_val() / RGBLIGHT_VAL_STEP)); oled_write(led_buf, false); + + return false; } #endif diff --git a/keyboards/yampad/keymaps/via/keymap.c b/keyboards/yampad/keymaps/via/keymap.c index d22eb26177..51d921be3f 100644 --- a/keyboards/yampad/keymaps/via/keymap.c +++ b/keyboards/yampad/keymaps/via/keymap.c @@ -122,7 +122,7 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_270; // flips the display 270 degrees } -void oled_task_user(void) { +bool oled_task_user(void) { // Host Keyboard Layer Status oled_write_P(PSTR("Layer"), false); switch (get_highest_layer(layer_state)) { @@ -159,5 +159,7 @@ void oled_task_user(void) { (uint8_t)(rgblight_get_sat() / RGBLIGHT_SAT_STEP), (uint8_t)(rgblight_get_val() / RGBLIGHT_VAL_STEP)); oled_write(led_buf, false); + + return false; } #endif diff --git a/keyboards/yampad/yampad.c b/keyboards/yampad/yampad.c index 950a987219..eab218d3b9 100644 --- a/keyboards/yampad/yampad.c +++ b/keyboards/yampad/yampad.c @@ -17,13 +17,14 @@ #include "yampad.h" #if defined(OLED_ENABLE) -__attribute__((weak)) -oled_rotation_t oled_init_user(oled_rotation_t rotation) { - return OLED_ROTATION_270; // flips the display 270 degrees +oled_rotation_t oled_init_kb(oled_rotation_t rotation) { + return OLED_ROTATION_270; } -__attribute__((weak)) -void oled_task_user(void) { +bool oled_task_kb(void) { + if (!oled_task_user()) { + return false; + } // Host Keyboard Layer Status oled_write_P(PSTR("Layer"), false); switch (get_highest_layer(layer_state)) { @@ -60,5 +61,7 @@ void oled_task_user(void) { (uint8_t)(rgblight_get_sat() / RGBLIGHT_SAT_STEP), (uint8_t)(rgblight_get_val() / RGBLIGHT_VAL_STEP)); oled_write(led_buf, false); + + return false; } #endif diff --git a/keyboards/z12/keymaps/zigotica/oled.c b/keyboards/z12/keymaps/zigotica/oled.c index 4b428a42b1..fa11a3d6c6 100644 --- a/keyboards/z12/keymaps/zigotica/oled.c +++ b/keyboards/z12/keymaps/zigotica/oled.c @@ -37,7 +37,7 @@ static void render_status(void) { } } -void oled_task_user(void) { +bool oled_task_user(void) { render_status(); + return false; } - diff --git a/keyboards/zoo/wampus/wampus.c b/keyboards/zoo/wampus/wampus.c index 350d47a3ed..aa41c27108 100644 --- a/keyboards/zoo/wampus/wampus.c +++ b/keyboards/zoo/wampus/wampus.c @@ -22,8 +22,7 @@ void board_init(void) { SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_SPI2_DMA_RMP); } -oled_rotation_t oled_init_user(oled_rotation_t rotation) { +oled_rotation_t oled_init_kb(oled_rotation_t rotation) { return OLED_ROTATION_180; } - #endif diff --git a/users/curry/oled.c b/users/curry/oled.c index fc87a46e50..27f6072ff1 100644 --- a/users/curry/oled.c +++ b/users/curry/oled.c @@ -137,7 +137,7 @@ void render_status_secondary(void) { render_keylogger_status(); } -void oled_task_user(void) { +bool oled_task_user(void) { if (timer_elapsed32(oled_timer) > 30000) { oled_off(); return; @@ -152,6 +152,7 @@ void oled_task_user(void) { } else { render_status_secondary(); } + return false; } bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { diff --git a/users/drashna/oled_stuff.c b/users/drashna/oled_stuff.c index 4b54919507..7ccdfc98ac 100644 --- a/users/drashna/oled_stuff.c +++ b/users/drashna/oled_stuff.c @@ -421,7 +421,7 @@ oled_rotation_t oled_init_user(oled_rotation_t rotation) { return oled_init_keymap(rotation); } -void oled_task_user(void) { +bool oled_task_user(void) { update_log(); if (is_keyboard_master()) { @@ -442,4 +442,5 @@ void oled_task_user(void) { } else { render_keylock_status(host_keyboard_leds()); } + return false; } diff --git a/users/ninjonas/oled.c b/users/ninjonas/oled.c index 1d88c30579..55eaf88ccb 100644 --- a/users/ninjonas/oled.c +++ b/users/ninjonas/oled.c @@ -90,7 +90,7 @@ static void render_logo(void) { oled_write_P(qmk_logo, false); } -void oled_task_user(void) { +bool oled_task_user(void) { if (timer_elapsed32(oled_timer) > 15000) { oled_off(); return; @@ -106,6 +106,7 @@ void oled_task_user(void) { oled_write_P(PSTR("\n"), false); oled_scroll_left(); } + return false; } #endif diff --git a/users/riblee/riblee.c b/users/riblee/riblee.c index 04e37b2428..307c697204 100644 --- a/users/riblee/riblee.c +++ b/users/riblee/riblee.c @@ -245,10 +245,9 @@ static void render_info(void) { } // Print string received via HID RAW - oled_write_ln(receive_buffer, false); -} + oled_write_ln(receive_buffer, false);} -void oled_task_user(void) { +bool oled_task_user(void) { static bool finished_timer = false; if (!finished_timer && (timer_elapsed(startup_timer) < 1000)) { render_logo(); @@ -259,6 +258,8 @@ void oled_task_user(void) { } render_info(); } + return false; + } #ifdef RAW_ENABLE diff --git a/users/snowe/oled_setup.c b/users/snowe/oled_setup.c index 3d21ea9f0a..dfc4b085e3 100644 --- a/users/snowe/oled_setup.c +++ b/users/snowe/oled_setup.c @@ -121,7 +121,7 @@ void render_bootmagic_status(void) { oled_write_ln(wpm, false); } -void oled_task_user(void) { +bool oled_task_user(void) { if (is_master) { oled_render_layer_state(); oled_render_keylog(); @@ -136,6 +136,7 @@ void oled_task_user(void) { render_stars(); # endif } + return false; } #endif // OLED_ENABLE diff --git a/users/tominabox1/tominabox1.c b/users/tominabox1/tominabox1.c index e48959be9d..7322ead0dc 100644 --- a/users/tominabox1/tominabox1.c +++ b/users/tominabox1/tominabox1.c @@ -262,7 +262,7 @@ void render_status_main(void) { __attribute__ ((weak)) void oled_task_keymap(void) {} -void oled_task_user(void) { +bool oled_task_user(void) { if (timer_elapsed(oled_timer) > 20000) { oled_off(); @@ -275,6 +275,7 @@ void oled_task_user(void) { oled_scroll_left(); } oled_task_keymap(); + return false; } #endif // OLED_Driver diff --git a/users/xulkal/custom_oled.c b/users/xulkal/custom_oled.c index 4ed2b9a0b0..7fe8040927 100644 --- a/users/xulkal/custom_oled.c +++ b/users/xulkal/custom_oled.c @@ -176,7 +176,7 @@ static void render_status(void) #endif // OLED_90ROTATION -void oled_task_user(void) +bool oled_task_user(void) { if (is_keyboard_master()) render_status(); @@ -185,4 +185,5 @@ void oled_task_user(void) render_logo(); oled_scroll_left(); } + return false; } From f4ea262c17ecd53b18180a19c33a9ba5da70ec9d Mon Sep 17 00:00:00 2001 From: lalalademaxiya1 <66767061+lalalademaxiya1@users.noreply.github.com> Date: Tue, 2 Nov 2021 06:43:53 +0800 Subject: [PATCH 388/595] Add a new led driver for Keychron's keyboards. (#14872) * Add a new led driver for Keychron's keyboards. * Update ckled2001.c/ckled2001.h. * Update ckled2001.c/ckled2001.h. * Update ckled2001.c/ckled2001.h. * Update ckled2001.c * Add a new led driver * Update ckled2001.c * Update ckled2001.c * Update ckled2001.c * Update ckled2001.c * Delete ckled2001.c * Create ckled2001.c * Update ckled2001.c * Update chibios-contrib Co-authored-by: keychron-dev <85598583+keychron-dev@users.noreply.github.com> Co-authored-by: lokher --- common_features.mk | 9 +- drivers/led/ckled2001.c | 226 ++++++++++++++++ drivers/led/ckled2001.h | 339 ++++++++++++++++++++++++ quantum/rgb_matrix/rgb_matrix.h | 2 + quantum/rgb_matrix/rgb_matrix_drivers.c | 49 +++- 5 files changed, 623 insertions(+), 2 deletions(-) create mode 100644 drivers/led/ckled2001.c create mode 100644 drivers/led/ckled2001.h diff --git a/common_features.mk b/common_features.mk index 0d6b86b1ef..b605dfbe5e 100644 --- a/common_features.mk +++ b/common_features.mk @@ -232,7 +232,7 @@ endif endif RGB_MATRIX_ENABLE ?= no -VALID_RGB_MATRIX_TYPES := AW20216 IS31FL3731 IS31FL3733 IS31FL3737 IS31FL3741 WS2812 custom +VALID_RGB_MATRIX_TYPES := AW20216 IS31FL3731 IS31FL3733 IS31FL3737 IS31FL3741 CKLED2001 WS2812 custom ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes) ifeq ($(filter $(RGB_MATRIX_DRIVER),$(VALID_RGB_MATRIX_TYPES)),) @@ -288,6 +288,13 @@ endif QUANTUM_LIB_SRC += i2c_master.c endif + ifeq ($(strip $(RGB_MATRIX_DRIVER)), CKLED2001) + OPT_DEFS += -DCKLED2001 -DSTM32_I2C -DHAL_USE_I2C=TRUE + COMMON_VPATH += $(DRIVER_PATH)/led + SRC += ckled2001.c + QUANTUM_LIB_SRC += i2c_master.c + endif + ifeq ($(strip $(RGB_MATRIX_DRIVER)), WS2812) OPT_DEFS += -DWS2812 WS2812_DRIVER_REQUIRED := yes diff --git a/drivers/led/ckled2001.c b/drivers/led/ckled2001.c new file mode 100644 index 0000000000..6307303437 --- /dev/null +++ b/drivers/led/ckled2001.c @@ -0,0 +1,226 @@ +/* Copyright 2021 @ Keychron (https://www.keychron.com) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "ckled2001.h" +#include "i2c_master.h" +#include "wait.h" + +#ifndef CKLED2001_TIMEOUT +# define CKLED2001_TIMEOUT 100 +#endif + +#ifndef CKLED2001_PERSISTENCE +# define CKLED2001_PERSISTENCE 0 +#endif + +#ifndef PHASE_CHANNEL +# define PHASE_CHANNEL MSKPHASE_12CHANNEL +#endif + +// Transfer buffer for TWITransmitData() +uint8_t g_twi_transfer_buffer[20]; + +// These buffers match the CKLED2001 PWM registers. +// The control buffers match the PG0 LED On/Off registers. +// Storing them like this is optimal for I2C transfers to the registers. +// We could optimize this and take out the unused registers from these +// buffers and the transfers in CKLED2001_write_pwm_buffer() but it's +// probably not worth the extra complexity. +uint8_t g_pwm_buffer[DRIVER_COUNT][192]; +bool g_pwm_buffer_update_required[DRIVER_COUNT] = {false}; + +uint8_t g_led_control_registers[DRIVER_COUNT][24] = {0}; +bool g_led_control_registers_update_required[DRIVER_COUNT] = {false}; + +bool CKLED2001_write_register(uint8_t addr, uint8_t reg, uint8_t data) { + // If the transaction fails function returns false. + g_twi_transfer_buffer[0] = reg; + g_twi_transfer_buffer[1] = data; + +#if CKLED2001_PERSISTENCE > 0 + for (uint8_t i = 0; i < CKLED2001_PERSISTENCE; i++) { + if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, CKLED2001_TIMEOUT) != 0) { + return false; + } + } +#else + if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 2, CKLED2001_TIMEOUT) != 0) { + return false; + } +#endif + return true; +} + +bool CKLED2001_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer) { + // Assumes PG1 is already selected. + // If any of the transactions fails function returns false. + // Transmit PWM registers in 12 transfers of 16 bytes. + // g_twi_transfer_buffer[] is 20 bytes + + // Iterate over the pwm_buffer contents at 16 byte intervals. + for (int i = 0; i < 192; i += 16) { + g_twi_transfer_buffer[0] = i; + // Copy the data from i to i+15. + // Device will auto-increment register for data after the first byte + // Thus this sets registers 0x00-0x0F, 0x10-0x1F, etc. in one transfer. + for (int j = 0; j < 16; j++) { + g_twi_transfer_buffer[1 + j] = pwm_buffer[i + j]; + } + +#if CKLED2001_PERSISTENCE > 0 + for (uint8_t i = 0; i < CKLED2001_PERSISTENCE; i++) { + if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, CKLED2001_TIMEOUT) != 0) { + return false; + } + } +#else + if (i2c_transmit(addr << 1, g_twi_transfer_buffer, 17, CKLED2001_TIMEOUT) != 0) { + return false; + } +#endif + } + return true; +} + +void CKLED2001_init(uint8_t addr) { + // Select to function page + CKLED2001_write_register(addr, CONFIGURE_CMD_PAGE, FUNCTION_PAGE); + // Setting LED driver to shutdown mode + CKLED2001_write_register(addr, CONFIGURATION_REG, MSKSW_SHUT_DOWN_MODE); + // Setting internal channel pulldown/pullup + CKLED2001_write_register(addr, PDU_REG, MSKSET_CA_CB_CHANNEL); + // Select number of scan phase + CKLED2001_write_register(addr, SCAN_PHASE_REG, PHASE_CHANNEL); + // Setting PWM Delay Phase + CKLED2001_write_register(addr, SLEW_RATE_CONTROL_MODE1_REG, MSKPWM_DELAY_PHASE_ENABLE); + // Setting Driving/Sinking Channel Slew Rate + CKLED2001_write_register(addr, SLEW_RATE_CONTROL_MODE2_REG, MSKDRIVING_SINKING_CHHANNEL_SLEWRATE_ENABLE); + // Setting Iref + CKLED2001_write_register(addr, SOFTWARE_SLEEP_REG, MSKSLEEP_DISABLE); + // Set LED CONTROL PAGE (Page 0) + CKLED2001_write_register(addr, CONFIGURE_CMD_PAGE, LED_CONTROL_PAGE); + for (int i = 0; i < LED_CONTROL_ON_OFF_LENGTH; i++) { + CKLED2001_write_register(addr, i, 0x00); + } + + // Set PWM PAGE (Page 1) + CKLED2001_write_register(addr, CONFIGURE_CMD_PAGE, LED_PWM_PAGE); + for (int i = 0; i < LED_CURRENT_TUNE_LENGTH; i++) { + CKLED2001_write_register(addr, i, 0x00); + } + + // Set CURRENT PAGE (Page 4) + CKLED2001_write_register(addr, CONFIGURE_CMD_PAGE, CURRENT_TUNE_PAGE); + for (int i = 0; i < LED_CURRENT_TUNE_LENGTH; i++) { + CKLED2001_write_register(addr, i, 0xFF); + } + + // Enable LEDs ON/OFF + CKLED2001_write_register(addr, CONFIGURE_CMD_PAGE, LED_CONTROL_PAGE); + for (int i = 0; i < LED_CONTROL_ON_OFF_LENGTH; i++) { + CKLED2001_write_register(addr, i, 0xFF); + } + + // Select to function page + CKLED2001_write_register(addr, CONFIGURE_CMD_PAGE, FUNCTION_PAGE); + // Setting LED driver to normal mode + CKLED2001_write_register(addr, CONFIGURATION_REG, MSKSW_NORMAL_MODE); +} + +void CKLED2001_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) { + if (index >= 0 && index < DRIVER_LED_TOTAL) { + ckled2001_led led = g_ckled2001_leds[index]; + + g_pwm_buffer[led.driver][led.r] = red; + g_pwm_buffer[led.driver][led.g] = green; + g_pwm_buffer[led.driver][led.b] = blue; + g_pwm_buffer_update_required[led.driver] = true; + } +} + +void CKLED2001_set_color_all(uint8_t red, uint8_t green, uint8_t blue) { + for (int i = 0; i < DRIVER_LED_TOTAL; i++) { + CKLED2001_set_color(i, red, green, blue); + } +} + +void CKLED2001_set_led_control_register(uint8_t index, bool red, bool green, bool blue) { + ckled2001_led led = g_ckled2001_leds[index]; + + uint8_t control_register_r = led.r / 8; + uint8_t control_register_g = led.g / 8; + uint8_t control_register_b = led.b / 8; + uint8_t bit_r = led.r % 8; + uint8_t bit_g = led.g % 8; + uint8_t bit_b = led.b % 8; + + if (red) { + g_led_control_registers[led.driver][control_register_r] |= (1 << bit_r); + } else { + g_led_control_registers[led.driver][control_register_r] &= ~(1 << bit_r); + } + if (green) { + g_led_control_registers[led.driver][control_register_g] |= (1 << bit_g); + } else { + g_led_control_registers[led.driver][control_register_g] &= ~(1 << bit_g); + } + if (blue) { + g_led_control_registers[led.driver][control_register_b] |= (1 << bit_b); + } else { + g_led_control_registers[led.driver][control_register_b] &= ~(1 << bit_b); + } + + g_led_control_registers_update_required[led.driver] = true; +} + +void CKLED2001_update_pwm_buffers(uint8_t addr, uint8_t index) { + if (g_pwm_buffer_update_required[index]) { + CKLED2001_write_register(addr, CONFIGURE_CMD_PAGE, LED_PWM_PAGE); + + // If any of the transactions fail we risk writing dirty PG0, + // refresh page 0 just in case. + if (!CKLED2001_write_pwm_buffer(addr, g_pwm_buffer[index])) { + g_led_control_registers_update_required[index] = true; + } + } + g_pwm_buffer_update_required[index] = false; +} + +void CKLED2001_update_led_control_registers(uint8_t addr, uint8_t index) { + if (g_led_control_registers_update_required[index]) { + CKLED2001_write_register(addr, CONFIGURE_CMD_PAGE, LED_CONTROL_PAGE); + for (int i = 0; i < 24; i++) { + CKLED2001_write_register(addr, i, g_led_control_registers[index][i]); + } + } + g_led_control_registers_update_required[index] = false; +} + +void CKLED2001_return_normal(uint8_t addr) { + // Select to function page + CKLED2001_write_register(addr, CONFIGURE_CMD_PAGE, FUNCTION_PAGE); + // Setting LED driver to normal mode + CKLED2001_write_register(addr, CONFIGURATION_REG, MSKSW_NORMAL_MODE); +} + +void CKLED2001_shutdown(uint8_t addr) { + // Select to function page + CKLED2001_write_register(addr, CONFIGURE_CMD_PAGE, FUNCTION_PAGE); + // Setting LED driver to shutdown mode + CKLED2001_write_register(addr, CONFIGURATION_REG, MSKSW_SHUT_DOWN_MODE); + // Write SW Sleep Register + CKLED2001_write_register(addr, SOFTWARE_SLEEP_REG, MSKSLEEP_ENABLE); +} diff --git a/drivers/led/ckled2001.h b/drivers/led/ckled2001.h new file mode 100644 index 0000000000..efe399690a --- /dev/null +++ b/drivers/led/ckled2001.h @@ -0,0 +1,339 @@ +/* Copyright 2021 @ Keychron (https://www.keychron.com) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include +#include +#include "progmem.h" + +typedef struct ckled2001_led { + uint8_t driver : 2; + uint8_t r; + uint8_t g; + uint8_t b; +} __attribute__((packed)) ckled2001_led; + +extern const ckled2001_led __flash g_ckled2001_leds[DRIVER_LED_TOTAL]; + +void CKLED2001_init(uint8_t addr); +bool CKLED2001_write_register(uint8_t addr, uint8_t reg, uint8_t data); +bool CKLED2001_write_pwm_buffer(uint8_t addr, uint8_t *pwm_buffer); + +void CKLED2001_set_color(int index, uint8_t red, uint8_t green, uint8_t blue); +void CKLED2001_set_color_all(uint8_t red, uint8_t green, uint8_t blue); + +void CKLED2001_set_led_control_register(uint8_t index, bool red, bool green, bool blue); + +// This should not be called from an interrupt +// (eg. from a timer interrupt). +// Call this while idle (in between matrix scans). +// If the buffer is dirty, it will update the driver with the buffer. +void CKLED2001_update_pwm_buffers(uint8_t addr, uint8_t index); +void CKLED2001_update_led_control_registers(uint8_t addr, uint8_t index); + +void CKLED2001_return_normal(uint8_t addr); +void CKLED2001_shutdown(uint8_t addr); + +// Registers Page Define +#define CONFIGURE_CMD_PAGE 0xFD +#define LED_CONTROL_PAGE 0x00 +#define LED_PWM_PAGE 0x01 +#define FUNCTION_PAGE 0x03 +#define CURRENT_TUNE_PAGE 0x04 + +// Function Register: address 0x00 +#define CONFIGURATION_REG 0x00 +#define MSKSW_SHUT_DOWN_MODE (0x0 << 0) +#define MSKSW_NORMAL_MODE (0x1 << 0) + +#define DRIVER_ID_REG 0x11 +#define CKLED2001_ID 0x8A + +#define PDU_REG 0x13 +#define MSKSET_CA_CB_CHANNEL 0xAA +#define MSKCLR_CA_CB_CHANNEL 0x00 + +#define SCAN_PHASE_REG 0x14 +#define MSKPHASE_12CHANNEL 0x00 +#define MSKPHASE_11CHANNEL 0x01 +#define MSKPHASE_10CHANNEL 0x02 +#define MSKPHASE_9CHANNEL 0x03 +#define MSKPHASE_8CHANNEL 0x04 +#define MSKPHASE_7CHANNEL 0x05 +#define MSKPHASE_6CHANNEL 0x06 +#define MSKPHASE_5CHANNEL 0x07 +#define MSKPHASE_4CHANNEL 0x08 +#define MSKPHASE_3CHANNEL 0x09 +#define MSKPHASE_2CHANNEL 0x0A +#define MSKPHASE_1CHANNEL 0x0B + +#define SLEW_RATE_CONTROL_MODE1_REG 0x15 +#define MSKPWM_DELAY_PHASE_ENABLE 0x04 +#define MSKPWM_DELAY_PHASE_DISABLE 0x00 + +#define SLEW_RATE_CONTROL_MODE2_REG 0x16 +#define MSKDRIVING_SINKING_CHHANNEL_SLEWRATE_ENABLE 0xC0 +#define MSKDRIVING_SINKING_CHHANNEL_SLEWRATE_DISABLE 0x00 + +#define OPEN_SHORT_ENABLE_REG 0x17 +#define MSKOPEN_DETECTION_ENABLE (0x01 << 7) +#define MSKOPEN_DETECTION_DISABLE (0x00) + +#define MSKSHORT_DETECTION_ENABLE (0x01 << 6) +#define MSKSHORT_DETECTION_DISABLE (0x00) + +#define OPEN_SHORT_DUTY_REG 0x18 +#define OPEN_SHORT_FLAG_REG 0x19 + +#define MSKOPEN_DETECTION_INTERRUPT_ENABLE (0x01 << 7) +#define MSKOPEN_DETECTION_INTERRUPT_DISABLE (0x00) + +#define MSKSHORT_DETECTION_INTERRUPT_ENABLE (0x01 << 6) +#define MSKSHORT_DETECTION_INTERRUPT_DISABLE (0x00) + +#define SOFTWARE_SLEEP_REG 0x1A +#define MSKSLEEP_ENABLE 0x02 +#define MSKSLEEP_DISABLE 0x00 + +// LED Control Registers +#define LED_CONTROL_ON_OFF_FIRST_ADDR 0x0 +#define LED_CONTROL_ON_OFF_LAST_ADDR 0x17 +#define LED_CONTROL_ON_OFF_LENGTH ((LED_CONTROL_ON_OFF_LAST_ADDR - LED_CONTROL_ON_OFF_FIRST_ADDR) + 1) + +#define LED_CONTROL_OPEN_FIRST_ADDR 0x18 +#define LED_CONTROL_OPEN_LAST_ADDR 0x2F +#define LED_CONTROL_OPEN_LENGTH ((LED_CONTROL_OPEN_LAST_ADDR - LED_CONTROL_OPEN_FIRST_ADDR) + 1) + +#define LED_CONTROL_SHORT_FIRST_ADDR 0x30 +#define LED_CONTROL_SHORT_LAST_ADDR 0x47 +#define LED_CONTROL_SHORT_LENGTH ((LED_CONTROL_SHORT_LAST_ADDR - LED_CONTROL_SHORT_FIRST_ADDR) + 1) + +#define LED_CONTROL_PAGE_LENGTH 0x48 + +// LED Control Registers +#define LED_PWM_FIRST_ADDR 0x00 +#define LED_PWM_LAST_ADDR 0xBF +#define LED_PWM_LENGTH 0xC0 + +// Current Tune Registers +#define LED_CURRENT_TUNE_FIRST_ADDR 0x00 +#define LED_CURRENT_TUNE_LAST_ADDR 0x0B +#define LED_CURRENT_TUNE_LENGTH 0x0C + +#define A_1 0x00 +#define A_2 0x01 +#define A_3 0x02 +#define A_4 0x03 +#define A_5 0x04 +#define A_6 0x05 +#define A_7 0x06 +#define A_8 0x07 +#define A_9 0x08 +#define A_10 0x09 +#define A_11 0x0A +#define A_12 0x0B +#define A_13 0x0C +#define A_14 0x0D +#define A_15 0x0E +#define A_16 0x0F + +#define B_1 0x10 +#define B_2 0x11 +#define B_3 0x12 +#define B_4 0x13 +#define B_5 0x14 +#define B_6 0x15 +#define B_7 0x16 +#define B_8 0x17 +#define B_9 0x18 +#define B_10 0x19 +#define B_11 0x1A +#define B_12 0x1B +#define B_13 0x1C +#define B_14 0x1D +#define B_15 0x1E +#define B_16 0x1F + +#define C_1 0x20 +#define C_2 0x21 +#define C_3 0x22 +#define C_4 0x23 +#define C_5 0x24 +#define C_6 0x25 +#define C_7 0x26 +#define C_8 0x27 +#define C_9 0x28 +#define C_10 0x29 +#define C_11 0x2A +#define C_12 0x2B +#define C_13 0x2C +#define C_14 0x2D +#define C_15 0x2E +#define C_16 0x2F + +#define D_1 0x30 +#define D_2 0x31 +#define D_3 0x32 +#define D_4 0x33 +#define D_5 0x34 +#define D_6 0x35 +#define D_7 0x36 +#define D_8 0x37 +#define D_9 0x38 +#define D_10 0x39 +#define D_11 0x3A +#define D_12 0x3B +#define D_13 0x3C +#define D_14 0x3D +#define D_15 0x3E +#define D_16 0x3F + +#define E_1 0x40 +#define E_2 0x41 +#define E_3 0x42 +#define E_4 0x43 +#define E_5 0x44 +#define E_6 0x45 +#define E_7 0x46 +#define E_8 0x47 +#define E_9 0x48 +#define E_10 0x49 +#define E_11 0x4A +#define E_12 0x4B +#define E_13 0x4C +#define E_14 0x4D +#define E_15 0x4E +#define E_16 0x4F + +#define F_1 0x50 +#define F_2 0x51 +#define F_3 0x52 +#define F_4 0x53 +#define F_5 0x54 +#define F_6 0x55 +#define F_7 0x56 +#define F_8 0x57 +#define F_9 0x58 +#define F_10 0x59 +#define F_11 0x5A +#define F_12 0x5B +#define F_13 0x5C +#define F_14 0x5D +#define F_15 0x5E +#define F_16 0x5F + +#define G_1 0x60 +#define G_2 0x61 +#define G_3 0x62 +#define G_4 0x63 +#define G_5 0x64 +#define G_6 0x65 +#define G_7 0x66 +#define G_8 0x67 +#define G_9 0x68 +#define G_10 0x69 +#define G_11 0x6A +#define G_12 0x6B +#define G_13 0x6C +#define G_14 0x6D +#define G_15 0x6E +#define G_16 0x6F + +#define H_1 0x70 +#define H_2 0x71 +#define H_3 0x72 +#define H_4 0x73 +#define H_5 0x74 +#define H_6 0x75 +#define H_7 0x76 +#define H_8 0x77 +#define H_9 0x78 +#define H_10 0x79 +#define H_11 0x7A +#define H_12 0x7B +#define H_13 0x7C +#define H_14 0x7D +#define H_15 0x7E +#define H_16 0x7F + +#define I_1 0x80 +#define I_2 0x81 +#define I_3 0x82 +#define I_4 0x83 +#define I_5 0x84 +#define I_6 0x85 +#define I_7 0x86 +#define I_8 0x87 +#define I_9 0x88 +#define I_10 0x89 +#define I_11 0x8A +#define I_12 0x8B +#define I_13 0x8C +#define I_14 0x8D +#define I_15 0x8E +#define I_16 0x8F + +#define J_1 0x90 +#define J_2 0x91 +#define J_3 0x92 +#define J_4 0x93 +#define J_5 0x94 +#define J_6 0x95 +#define J_7 0x96 +#define J_8 0x97 +#define J_9 0x98 +#define J_10 0x99 +#define J_11 0x9A +#define J_12 0x9B +#define J_13 0x9C +#define J_14 0x9D +#define J_15 0x9E +#define J_16 0x9F + +#define K_1 0xA0 +#define K_2 0xA1 +#define K_3 0xA2 +#define K_4 0xA3 +#define K_5 0xA4 +#define K_6 0xA5 +#define K_7 0xA6 +#define K_8 0xA7 +#define K_9 0xA8 +#define K_10 0xA9 +#define K_11 0xAA +#define K_12 0xAB +#define K_13 0xAC +#define K_14 0xAD +#define K_15 0xAE +#define K_16 0xAF + +#define L_1 0xB0 +#define L_2 0xB1 +#define L_3 0xB2 +#define L_4 0xB3 +#define L_5 0xB4 +#define L_6 0xB5 +#define L_7 0xB6 +#define L_8 0xB7 +#define L_9 0xB8 +#define L_10 0xB9 +#define L_11 0xBA +#define L_12 0xBB +#define L_13 0xBC +#define L_14 0xBD +#define L_15 0xBE +#define L_16 0xBF \ No newline at end of file diff --git a/quantum/rgb_matrix/rgb_matrix.h b/quantum/rgb_matrix/rgb_matrix.h index 112dfaaae5..af5ca9e791 100644 --- a/quantum/rgb_matrix/rgb_matrix.h +++ b/quantum/rgb_matrix/rgb_matrix.h @@ -33,6 +33,8 @@ # include "is31fl3737.h" #elif defined(IS31FL3741) # include "is31fl3741.h" +#elif defined(CKLED2001) +# include "ckled2001.h" #elif defined(AW20216) # include "aw20216.h" #elif defined(WS2812) diff --git a/quantum/rgb_matrix/rgb_matrix_drivers.c b/quantum/rgb_matrix/rgb_matrix_drivers.c index 949cc36612..130ca47a63 100644 --- a/quantum/rgb_matrix/rgb_matrix_drivers.c +++ b/quantum/rgb_matrix/rgb_matrix_drivers.c @@ -23,7 +23,7 @@ * be here if shared between boards. */ -#if defined(IS31FL3731) || defined(IS31FL3733) || defined(IS31FL3737) || defined(IS31FL3741) +#if defined(IS31FL3731) || defined(IS31FL3733) || defined(IS31FL3737) || defined(IS31FL3741) || defined(CKLED2001) # include "i2c_master.h" // TODO: Remove this at some later date @@ -80,6 +80,18 @@ static void init(void) { # elif defined(IS31FL3741) IS31FL3741_init(DRIVER_ADDR_1); + +# elif defined(CKLED2001) + CKLED2001_init(DRIVER_ADDR_1); +# if defined(DRIVER_ADDR_2) + CKLED2001_init(DRIVER_ADDR_2); +# if defined(DRIVER_ADDR_3) + CKLED2001_init(DRIVER_ADDR_3); +# if defined(DRIVER_ADDR_4) + CKLED2001_init(DRIVER_ADDR_4); +# endif +# endif +# endif # endif for (int index = 0; index < DRIVER_LED_TOTAL; index++) { @@ -94,6 +106,8 @@ static void init(void) { IS31FL3737_set_led_control_register(index, enabled, enabled, enabled); # elif defined(IS31FL3741) IS31FL3741_set_led_control_register(index, enabled, enabled, enabled); +# elif defined(CKLED2001) + CKLED2001_set_led_control_register(index, enabled, enabled, enabled); # endif } @@ -130,6 +144,18 @@ static void init(void) { # elif defined(IS31FL3741) IS31FL3741_update_led_control_registers(DRIVER_ADDR_1, 0); + +# elif defined(CKLED2001) + CKLED2001_update_led_control_registers(DRIVER_ADDR_1, 0); +# if defined(DRIVER_ADDR_2) + CKLED2001_update_led_control_registers(DRIVER_ADDR_2, 1); +# if defined(DRIVER_ADDR_3) + CKLED2001_update_led_control_registers(DRIVER_ADDR_3, 2); +# if defined(DRIVER_ADDR_4) + CKLED2001_update_led_control_registers(DRIVER_ADDR_4, 3); +# endif +# endif +# endif # endif } @@ -204,6 +230,27 @@ const rgb_matrix_driver_t rgb_matrix_driver = { .set_color = IS31FL3741_set_color, .set_color_all = IS31FL3741_set_color_all, }; + +# elif defined(CKLED2001) +static void flush(void) { + CKLED2001_update_pwm_buffers(DRIVER_ADDR_1, 0); +# if defined(DRIVER_ADDR_2) + CKLED2001_update_pwm_buffers(DRIVER_ADDR_2, 1); +# if defined(DRIVER_ADDR_3) + CKLED2001_update_pwm_buffers(DRIVER_ADDR_3, 2); +# if defined(DRIVER_ADDR_4) + CKLED2001_update_pwm_buffers(DRIVER_ADDR_4, 3); +# endif +# endif +# endif +} + +const rgb_matrix_driver_t rgb_matrix_driver = { + .init = init, + .flush = flush, + .set_color = CKLED2001_set_color, + .set_color_all = CKLED2001_set_color_all, +}; # endif #elif defined(AW20216) From 7ae0f371cf55a589a4735098f52e722f579de41d Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Mon, 1 Nov 2021 22:45:30 +0000 Subject: [PATCH 389/595] Add support to persist MD LED framework settings (#14980) * Add support to persist MD LED framework settings * avoid out-of-bounds errors when SmartEEPROM is not enabled * Update brightness defaults * clang --- keyboards/massdrop/alt/config.h | 3 + .../massdrop/alt/keymaps/default_md/keymap.c | 8 +++ keyboards/massdrop/ctrl/config.h | 3 + .../massdrop/ctrl/keymaps/default_md/keymap.c | 8 +++ tmk_core/protocol/arm_atsam/md_rgb_matrix.c | 60 ++++++++++++++----- tmk_core/protocol/arm_atsam/md_rgb_matrix.h | 55 ++++++++++++----- 6 files changed, 106 insertions(+), 31 deletions(-) diff --git a/keyboards/massdrop/alt/config.h b/keyboards/massdrop/alt/config.h index c37949a74b..1a0a7c9768 100644 --- a/keyboards/massdrop/alt/config.h +++ b/keyboards/massdrop/alt/config.h @@ -43,6 +43,9 @@ along with this program. If not, see . /* Temporary solution for matrix delay */ #define IGNORE_ATOMIC_BLOCK +/* Avoid out-of-bounds errors when SmartEEPROM is not enabled */ +#define EEPROM_SIZE 1024 + /* MCU Port name definitions */ #define PA 0 #define PB 1 diff --git a/keyboards/massdrop/alt/keymaps/default_md/keymap.c b/keyboards/massdrop/alt/keymaps/default_md/keymap.c index 5bd543ed63..fa8b294cd1 100644 --- a/keyboards/massdrop/alt/keymaps/default_md/keymap.c +++ b/keyboards/massdrop/alt/keymaps/default_md/keymap.c @@ -61,6 +61,14 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { static uint32_t key_timer; static uint8_t scroll_effect = 0; + switch (keycode) { + case L_BRI ... U_T_AGCR: + if (record->event.pressed) { + md_led_changed(); + } + break; + } + switch (keycode) { case L_BRI: if (record->event.pressed) { diff --git a/keyboards/massdrop/ctrl/config.h b/keyboards/massdrop/ctrl/config.h index fe8b600234..b1df4452cc 100644 --- a/keyboards/massdrop/ctrl/config.h +++ b/keyboards/massdrop/ctrl/config.h @@ -42,6 +42,9 @@ along with this program. If not, see . /* Temporary solution for matrix delay */ #define IGNORE_ATOMIC_BLOCK +/* Avoid out-of-bounds errors when SmartEEPROM is not enabled */ +#define EEPROM_SIZE 1024 + /* MCU Port name definitions */ #define PA 0 #define PB 1 diff --git a/keyboards/massdrop/ctrl/keymaps/default_md/keymap.c b/keyboards/massdrop/ctrl/keymaps/default_md/keymap.c index cf4eea646d..db36131fca 100644 --- a/keyboards/massdrop/ctrl/keymaps/default_md/keymap.c +++ b/keyboards/massdrop/ctrl/keymaps/default_md/keymap.c @@ -64,6 +64,14 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { static uint32_t key_timer; static uint8_t scroll_effect = 0; + switch (keycode) { + case L_BRI ... U_T_AGCR: + if (record->event.pressed) { + md_led_changed(); + } + break; + } + switch (keycode) { case L_BRI: if (record->event.pressed) { diff --git a/tmk_core/protocol/arm_atsam/md_rgb_matrix.c b/tmk_core/protocol/arm_atsam/md_rgb_matrix.c index 43d9f2ee60..0741584439 100644 --- a/tmk_core/protocol/arm_atsam/md_rgb_matrix.c +++ b/tmk_core/protocol/arm_atsam/md_rgb_matrix.c @@ -15,6 +15,10 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ +#define FLUSH_TIMEOUT 5000 +#define EECONFIG_MD_LED ((uint8_t*)(EECONFIG_SIZE + 64)) +#define MD_LED_CONFIG_VERSION 1 + #ifdef RGB_MATRIX_ENABLE # include "arm_atsam_protocol.h" # include "led.h" @@ -23,8 +27,41 @@ along with this program. If not, see . # include # ifdef USE_MASSDROP_CONFIGURATOR +// TODO?: wire these up to keymap.c +md_led_config_t md_led_config = {0}; + +EECONFIG_DEBOUNCE_HELPER(md_led, EECONFIG_MD_LED, md_led_config); + +void eeconfig_update_md_led_default(void) { + md_led_config.ver = MD_LED_CONFIG_VERSION; + + gcr_desired = LED_GCR_MAX; + led_animation_orientation = 0; + led_animation_direction = 0; + led_animation_breathing = 0; + led_animation_id = 0; + led_animation_speed = 4.0f; + led_lighting_mode = LED_MODE_NORMAL; + led_enabled = 1; + led_animation_breathe_cur = BREATHE_MIN_STEP; + breathe_dir = 1; + led_animation_circular = 0; + led_edge_brightness = 1.0f; + led_ratio_brightness = 1.0f; + led_edge_mode = LED_EDGE_MODE_ALL; + + eeconfig_flush_md_led(true); +} + +void md_led_changed(void) { eeconfig_flag_md_led(true); } + +// todo: use real task rather than this bodge +void housekeeping_task_kb(void) { eeconfig_flush_md_led_task(FLUSH_TIMEOUT); } + __attribute__((weak)) led_instruction_t led_instructions[] = {{.end = 1}}; static void md_rgb_matrix_config_override(int i); +# else +uint8_t gcr_desired; # endif // USE_MASSDROP_CONFIGURATOR void SERCOM1_0_Handler(void) { @@ -56,7 +93,6 @@ issi3733_driver_t issidrv[ISSI3733_DRIVER_COUNT]; issi3733_led_t led_map[ISSI3733_LED_COUNT] = ISSI3733_LED_MAP; RGB led_buffer[ISSI3733_LED_COUNT]; -uint8_t gcr_desired; uint8_t gcr_actual; uint8_t gcr_actual_last; # ifdef USE_MASSDROP_CONFIGURATOR @@ -218,6 +254,13 @@ static void led_set_all(uint8_t r, uint8_t g, uint8_t b) { static void init(void) { DBGC(DC_LED_MATRIX_INIT_BEGIN); +# ifdef USE_MASSDROP_CONFIGURATOR + eeconfig_init_md_led(); + if (md_led_config.ver != MD_LED_CONFIG_VERSION) { + eeconfig_update_md_led_default(); + } +# endif + issi3733_prepare_arrays(); md_rgb_matrix_prepare(); @@ -331,21 +374,6 @@ const rgb_matrix_driver_t rgb_matrix_driver = {.init = init, .flush = flush, .se # ifdef USE_MASSDROP_CONFIGURATOR // Ported from Massdrop QMK GitHub Repo -// TODO?: wire these up to keymap.c -uint8_t led_animation_orientation = 0; -uint8_t led_animation_direction = 0; -uint8_t led_animation_breathing = 0; -uint8_t led_animation_id = 0; -float led_animation_speed = 4.0f; -uint8_t led_lighting_mode = LED_MODE_NORMAL; -uint8_t led_enabled = 1; -uint8_t led_animation_breathe_cur = BREATHE_MIN_STEP; -uint8_t breathe_dir = 1; -uint8_t led_animation_circular = 0; -float led_edge_brightness = 1.0f; -float led_ratio_brightness = 1.0f; -uint8_t led_edge_mode = LED_EDGE_MODE_ALL; - static void led_run_pattern(led_setup_t* f, float* ro, float* go, float* bo, float pos) { float po; diff --git a/tmk_core/protocol/arm_atsam/md_rgb_matrix.h b/tmk_core/protocol/arm_atsam/md_rgb_matrix.h index f72dca2985..deea12b888 100644 --- a/tmk_core/protocol/arm_atsam/md_rgb_matrix.h +++ b/tmk_core/protocol/arm_atsam/md_rgb_matrix.h @@ -19,6 +19,7 @@ along with this program. If not, see . #define _LED_MATRIX_H_ #include "quantum.h" +#include "eeprom.h" // From keyboard #include "config_led.h" @@ -79,7 +80,6 @@ typedef struct issi3733_led_s { extern issi3733_driver_t issidrv[ISSI3733_DRIVER_COUNT]; -extern uint8_t gcr_desired; extern uint8_t gcr_breathe; extern uint8_t gcr_actual; extern uint8_t gcr_actual_last; @@ -140,19 +140,43 @@ typedef struct led_instruction_s { extern led_instruction_t led_instructions[]; -extern uint8_t led_animation_breathing; -extern uint8_t led_animation_id; -extern float led_animation_speed; -extern uint8_t led_lighting_mode; -extern uint8_t led_enabled; -extern uint8_t led_animation_breathe_cur; -extern uint8_t led_animation_direction; -extern uint8_t breathe_dir; -extern uint8_t led_animation_orientation; -extern uint8_t led_animation_circular; -extern float led_edge_brightness; -extern float led_ratio_brightness; -extern uint8_t led_edge_mode; +typedef struct led_config_s { + uint8_t ver; // assumed to be zero on eeprom reset + + uint8_t desired_gcr; + uint8_t animation_breathing; + uint8_t animation_id; + float animation_speed; + uint8_t lighting_mode; + uint8_t enabled; + uint8_t animation_breathe_cur; + uint8_t animation_direction; + uint8_t animation_breathe_dir; + uint8_t animation_orientation; + uint8_t animation_circular; + float edge_brightness; + float ratio_brightness; + uint8_t edge_mode; +} md_led_config_t; + +extern md_led_config_t md_led_config; + +void md_led_changed(void); + +# define gcr_desired md_led_config.desired_gcr +# define led_animation_breathing md_led_config.animation_breathing +# define led_animation_id md_led_config.animation_id +# define led_animation_speed md_led_config.animation_speed +# define led_lighting_mode md_led_config.lighting_mode +# define led_enabled md_led_config.enabled +# define led_animation_breathe_cur md_led_config.animation_breathe_cur +# define led_animation_direction md_led_config.animation_direction +# define breathe_dir md_led_config.animation_breathe_dir +# define led_animation_orientation md_led_config.animation_orientation +# define led_animation_circular md_led_config.animation_circular +# define led_edge_brightness md_led_config.edge_brightness +# define led_ratio_brightness md_led_config.ratio_brightness +# define led_edge_mode md_led_config.edge_mode # define LED_MODE_NORMAL 0 // Must be 0 # define LED_MODE_KEYS_ONLY 1 @@ -173,7 +197,8 @@ extern uint8_t led_edge_mode; # define LED_IS_EDGE(scan) (scan >= LED_EDGE_MIN_SCAN) // Return true if an LED's scan value indicates an edge LED # define LED_IS_EDGE_ALT(scan) (scan == LED_EDGE_ALT_MODE) // Return true if an LED's scan value indicates an alternate edge mode LED # define LED_IS_INDICATOR(scan) (scan == LED_INDICATOR_SCAN) // Return true if an LED's scan value indicates it is a dedicated Indicator - +#else +extern uint8_t gcr_desired; #endif // USE_MASSDROP_CONFIGURATOR #endif //_LED_MATRIX_H_ From 0c725017638ec86011191bf835735fb6c569d298 Mon Sep 17 00:00:00 2001 From: donicrosby Date: Mon, 1 Nov 2021 19:40:01 -0400 Subject: [PATCH 390/595] Enable de-ghosting for RGB/LED matrix on all ISSI LED drivers (#14508) * Initial work for de-ghost enable * Dumb mistake with the redefine * Added Copywrite stuff on source files * Fixed whitespace errors * Added support for all ISSI LED drivers * Updated docs for support for ISSI LED driver pull-up pull-down * Applied clang format * Added 'boolean' flag to enable de-ghosting for the is31fl3731 IC * Fixed some of the grammer in the docs * Fixed comment placement and grammer of comment * Fixed whitespace errors from lint Co-authored-by: donicrosby --- docs/feature_rgb_matrix.md | 47 ++++++++++++++++++++++------ drivers/led/issi/is31fl3731-simple.c | 7 +++++ drivers/led/issi/is31fl3731.c | 7 +++++ drivers/led/issi/is31fl3733.c | 11 +++++++ drivers/led/issi/is31fl3733.h | 9 ++++++ drivers/led/issi/is31fl3736.c | 13 ++++++++ drivers/led/issi/is31fl3736.h | 10 ++++++ drivers/led/issi/is31fl3737.c | 13 ++++++++ drivers/led/issi/is31fl3737.h | 10 ++++++ drivers/led/issi/is31fl3741.c | 10 +++++- drivers/led/issi/is31fl3741.h | 9 ++++++ 11 files changed, 136 insertions(+), 10 deletions(-) diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md index fa06e46e4a..cad7c50f18 100644 --- a/docs/feature_rgb_matrix.md +++ b/docs/feature_rgb_matrix.md @@ -21,6 +21,7 @@ You can use between 1 and 4 IS31FL3731 IC's. Do not specify `DRIVER_ADDR_` de |----------|-------------|---------| | `ISSI_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 | | `ISSI_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 | +| `ISSI_3731_DEGHOST` | (Optional) Set this define to enable de-ghosting by halving Vcc during blanking time | | | `DRIVER_COUNT` | (Required) How many RGB driver IC's are present | | | `DRIVER_LED_TOTAL` | (Required) How many RGB lights are present across all drivers | | | `DRIVER_ADDR_1` | (Required) Address for the first RGB driver | | @@ -85,6 +86,8 @@ You can use between 1 and 4 IS31FL3733 IC's. Do not specify `DRIVER_ADDR_` de | `ISSI_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 | | `ISSI_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 | | `ISSI_PWM_FREQUENCY` | (Optional) PWM Frequency Setting - IS31FL3733B only | 0 | +| `ISSI_SWPULLUP` | (Optional) Set the value of the SWx lines on-chip de-ghosting resistors | PUR_0R (Disabled) | +| `ISSI_CSPULLUP` | (Optional) Set the value of the CSx lines on-chip de-ghosting resistors | PUR_0R (Disabled) | | `DRIVER_COUNT` | (Required) How many RGB driver IC's are present | | | `DRIVER_LED_TOTAL` | (Required) How many RGB lights are present across all drivers | | | `DRIVER_ADDR_1` | (Required) Address for the first RGB driver | | @@ -96,6 +99,18 @@ You can use between 1 and 4 IS31FL3733 IC's. Do not specify `DRIVER_ADDR_` de | `DRIVER_SYNC_3` | (Optional) Sync configuration for the third RGB driver | 0 | | `DRIVER_SYNC_4` | (Optional) Sync configuration for the fourth RGB driver | 0 | +The IS31FL3733 IC's have on-chip resistors that can be enabled to allow for de-ghosting of the RGB matrix. By default these resistors are not enabled (`ISSI_SWPULLUP`/`ISSI_CSPULLUP` are given the value of`PUR_0R`), the values that can be set to enable de-ghosting are as follows: + +| `ISSI_SWPULLUP/ISSI_CSPULLUP` | Description | +|----------------------|-------------| +| `PUR_0R` | (default) Do not use the on-chip resistors/enable de-ghosting | +| `PUR_05KR` | The 0.5k Ohm resistor used during blanking period (t_NOL) | +| `PUR_3KR` | The 3k Ohm resistor used at all times | +| `PUR_4KR` | The 4k Ohm resistor used at all times | +| `PUR_8KR` | The 8k Ohm resistor used at all times | +| `PUR_16KR` | The 16k Ohm resistor used at all times | +| `PUR_32KR` | The 32k Ohm resistor used during blanking period (t_NOL) | + Here is an example using 2 drivers. ```c @@ -156,11 +171,25 @@ Configure the hardware via your `config.h`: |----------|-------------|---------| | `ISSI_TIMEOUT` | (Optional) How long to wait for i2c messages, in milliseconds | 100 | | `ISSI_PERSISTENCE` | (Optional) Retry failed messages this many times | 0 | +| `ISSI_SWPULLUP` | (Optional) Set the value of the SWx lines on-chip de-ghosting resistors | PUR_0R (Disabled) | +| `ISSI_CSPULLUP` | (Optional) Set the value of the CSx lines on-chip de-ghosting resistors | PUR_0R (Disabled) | | `DRIVER_COUNT` | (Required) How many RGB driver IC's are present | | | `DRIVER_LED_TOTAL` | (Required) How many RGB lights are present across all drivers | | | `DRIVER_ADDR_1` | (Required) Address for the first RGB driver | | | `DRIVER_ADDR_2` | (Optional) Address for the second RGB driver | | +The IS31FL3737 IC's have on-chip resistors that can be enabled to allow for de-ghosting of the RGB matrix. By default these resistors are not enabled (`ISSI_SWPULLUP`/`ISSI_CSPULLUP` are given the value of`PUR_0R`), the values that can be set to enable de-ghosting are as follows: + +| `ISSI_SWPULLUP/ISSI_CSPULLUP` | Description | +|----------------------|-------------| +| `PUR_0R` | (default) Do not use the on-chip resistors/enable de-ghosting | +| `PUR_05KR` | The 0.5k Ohm resistor used during blanking period (t_NOL) | +| `PUR_1KR` | The 1k Ohm resistor used during blanking period (t_NOL) | +| `PUR_2KR` | The 2k Ohm resistor used during blanking period (t_NOL) | +| `PUR_4KR` | The 4k Ohm resistor used during blanking period (t_NOL) | +| `PUR_8KR` | The 8k Ohm resistor during blanking period (t_NOL) | +| `PUR_16KR` | The 16k Ohm resistor during blanking period (t_NOL) | +| `PUR_32KR` | The 32k Ohm resistor used during blanking period (t_NOL) | Here is an example using 2 drivers. @@ -184,7 +213,7 @@ Here is an example using 2 drivers. ``` !> Note the parentheses, this is so when `DRIVER_LED_TOTAL` is used in code and expanded, the values are added together before any additional math is applied to them. As an example, `rand() % (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)` will give very different results than `rand() % DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL`. -Currently only 2 drivers are supported, but it would be trivial to support all 4 combinations. +Currently only 2 drivers are supported, but it would be trivial to support all 4 combinations. Define these arrays listing all the LEDs in your `.c`: @@ -343,7 +372,7 @@ x = 224 / (NUMBER_OF_COLS - 1) * COL_POSITION y = 64 / (NUMBER_OF_ROWS - 1) * ROW_POSITION ``` -Where NUMBER_OF_COLS, NUMBER_OF_ROWS, COL_POSITION, & ROW_POSITION are all based on the physical layout of your keyboard, not the electrical layout. +Where NUMBER_OF_COLS, NUMBER_OF_ROWS, COL_POSITION, & ROW_POSITION are all based on the physical layout of your keyboard, not the electrical layout. As mentioned earlier, the center of the keyboard by default is expected to be `{ 112, 32 }`, but this can be changed if you want to more accurately calculate the LED's physical `{ x, y }` positions. Keyboard designers can implement `#define RGB_MATRIX_CENTER { 112, 32 }` in their config.h file with the new center point of the keyboard, or where they want it to be allowing more possibilities for the `{ x, y }` values. Do note that the maximum value for x or y is 255, and the recommended maximum is 224 as this gives animations runoff room before they reset. @@ -386,7 +415,7 @@ All RGB keycodes are currently shared with the RGBLIGHT system: * `RGB_MODE_*` keycodes will generally work, but not all of the modes are currently mapped to the correct effects for the RGB Matrix system. -`RGB_MODE_PLAIN`, `RGB_MODE_BREATHE`, `RGB_MODE_RAINBOW`, and `RGB_MATRIX_SWIRL` are the only ones that are mapped properly. The rest don't have a direct equivalent, and are not mapped. +`RGB_MODE_PLAIN`, `RGB_MODE_BREATHE`, `RGB_MODE_RAINBOW`, and `RGB_MATRIX_SWIRL` are the only ones that are mapped properly. The rest don't have a direct equivalent, and are not mapped. !> By default, if you have both the [RGB Light](feature_rgblight.md) and the RGB Matrix feature enabled, these keycodes will work for both features, at the same time. You can disable the keycode functionality by defining the `*_DISABLE_KEYCODES` option for the specific feature. @@ -423,7 +452,7 @@ enum rgb_matrix_effects { RGB_MATRIX_JELLYBEAN_RAINDROPS, // Randomly changes a single key's hue and saturation RGB_MATRIX_HUE_BREATHING, // Hue shifts up a slight ammount at the same time, then shifts back RGB_MATRIX_HUE_PENDULUM, // Hue shifts up a slight ammount in a wave to the right, then back to the left - RGB_MATRIX_HUE_WAVE, // Hue shifts up a slight ammount and then back down in a wave to the right + RGB_MATRIX_HUE_WAVE, // Hue shifts up a slight ammount and then back down in a wave to the right RGB_MATRIX_FRACTAL, // Single hue fractal filled keys pulsing horizontally out to edges #if define(RGB_MATRIX_FRAMEBUFFER_EFFECTS) RGB_MATRIX_TYPING_HEATMAP, // How hot is your WPM! @@ -698,7 +727,7 @@ Where `28` is an unused index from `eeconfig.h`. ### Indicators :id=indicators -If you want to set custom indicators, such as an LED for Caps Lock, or layer indication, you can use the `rgb_matrix_indicators_kb` or `rgb_matrix_indicators_user` function for that: +If you want to set custom indicators, such as an LED for Caps Lock, or layer indication, you can use the `rgb_matrix_indicators_kb` or `rgb_matrix_indicators_user` function for that: ```c void rgb_matrix_indicators_kb(void) { rgb_matrix_set_color(index, red, green, blue); @@ -753,18 +782,18 @@ This example sets the modifiers to be a specific color based on the layer state. ```c void rgb_matrix_indicators_advanced_user(uint8_t led_min, uint8_t led_max) { HSV hsv = {0, 255, 255}; - + if (layer_state_is(layer_state, 2)) { hsv = {130, 255, 255}; } else { hsv = {30, 255, 255}; } - + if (hsv.v > rgb_matrix_get_val()) { hsv.v = rgb_matrix_get_val(); } RGB rgb = hsv_to_rgb(hsv); - + for (uint8_t i = led_min; i <= led_max; i++) { if (HAS_FLAGS(g_led_config.flags[i], 0x01)) { // 0x01 == LED_FLAG_MODIFIER rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); @@ -773,7 +802,7 @@ void rgb_matrix_indicators_advanced_user(uint8_t led_min, uint8_t led_max) { } ``` -If you want to indicate a Host LED status (caps lock, num lock, etc), you can use something like this to light up the caps lock key: +If you want to indicate a Host LED status (caps lock, num lock, etc), you can use something like this to light up the caps lock key: ```c void rgb_matrix_indicators_advanced_user(uint8_t led_min, uint8_t led_max) { diff --git a/drivers/led/issi/is31fl3731-simple.c b/drivers/led/issi/is31fl3731-simple.c index d295772f5e..9d28ea91d0 100644 --- a/drivers/led/issi/is31fl3731-simple.c +++ b/drivers/led/issi/is31fl3731-simple.c @@ -1,6 +1,7 @@ /* Copyright 2017 Jason Williams * Copyright 2018 Jack Humbert * Copyright 2019 Clueboard + * Copyright 2021 Doni Crosby * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -40,6 +41,9 @@ #define ISSI_REG_PICTUREFRAME 0x01 +// Not defined in the datasheet -- See AN for IC +#define ISSI_REG_GHOST_IMAGE_PREVENTION 0xC2 // Set bit 4 to enable de-ghosting + #define ISSI_REG_SHUTDOWN 0x0A #define ISSI_REG_AUDIOSYNC 0x06 @@ -144,6 +148,9 @@ void IS31FL3731_init(uint8_t addr) { // enable software shutdown IS31FL3731_write_register(addr, ISSI_REG_SHUTDOWN, 0x00); +#ifdef ISSI_3731_DEGHOST // set to enable de-ghosting of the array + IS31FL3731_write_register(addr, ISSI_REG_GHOST_IMAGE_PREVENTION, 0x10); +#endif // this delay was copied from other drivers, might not be needed wait_ms(10); diff --git a/drivers/led/issi/is31fl3731.c b/drivers/led/issi/is31fl3731.c index 110bdc1be4..fbf24c30fb 100644 --- a/drivers/led/issi/is31fl3731.c +++ b/drivers/led/issi/is31fl3731.c @@ -1,5 +1,6 @@ /* Copyright 2017 Jason Williams * Copyright 2018 Jack Humbert + * Copyright 2021 Doni Crosby * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -39,6 +40,9 @@ #define ISSI_REG_PICTUREFRAME 0x01 +// Not defined in the datasheet -- See AN for IC +#define ISSI_REG_GHOST_IMAGE_PREVENTION 0xC2 // Set bit 4 to enable de-ghosting + #define ISSI_REG_SHUTDOWN 0x0A #define ISSI_REG_AUDIOSYNC 0x06 @@ -132,6 +136,9 @@ void IS31FL3731_init(uint8_t addr) { // enable software shutdown IS31FL3731_write_register(addr, ISSI_REG_SHUTDOWN, 0x00); +#ifdef ISSI_3731_DEGHOST // set to enable de-ghosting of the array + IS31FL3731_write_register(addr, ISSI_REG_GHOST_IMAGE_PREVENTION, 0x10); +#endif // this delay was copied from other drivers, might not be needed wait_ms(10); diff --git a/drivers/led/issi/is31fl3733.c b/drivers/led/issi/is31fl3733.c index 4ddd827caf..c64d035135 100644 --- a/drivers/led/issi/is31fl3733.c +++ b/drivers/led/issi/is31fl3733.c @@ -1,6 +1,7 @@ /* Copyright 2017 Jason Williams * Copyright 2018 Jack Humbert * Copyright 2018 Yiancar + * Copyright 2021 Doni Crosby * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -58,6 +59,12 @@ #ifndef ISSI_PWM_FREQUENCY # define ISSI_PWM_FREQUENCY 0b000 // PFS - IS31FL3733B only +#ifndef ISSI_SWPULLUP +# define ISSI_SWPULLUP PUR_0R +#endif + +#ifndef ISSI_CSPULLUP +# define ISSI_CSPULLUP PUR_0R #endif // Transfer buffer for TWITransmitData() @@ -158,6 +165,10 @@ void IS31FL3733_init(uint8_t addr, uint8_t sync) { // Select PG3 IS31FL3733_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION); + // Set de-ghost pull-up resistors (SWx) + IS31FL3733_write_register(addr, ISSI_REG_SWPULLUP, ISSI_SWPULLUP); + // Set de-ghost pull-down resistors (CSx) + IS31FL3733_write_register(addr, ISSI_REG_CSPULLUP, ISSI_CSPULLUP); // Set global current to maximum. IS31FL3733_write_register(addr, ISSI_REG_GLOBALCURRENT, 0xFF); // Disable software shutdown. diff --git a/drivers/led/issi/is31fl3733.h b/drivers/led/issi/is31fl3733.h index 64fd38eb19..daa226b41a 100644 --- a/drivers/led/issi/is31fl3733.h +++ b/drivers/led/issi/is31fl3733.h @@ -1,6 +1,7 @@ /* Copyright 2017 Jason Williams * Copyright 2018 Jack Humbert * Copyright 2018 Yiancar + * Copyright 2021 Doni Crosby * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -47,6 +48,14 @@ void IS31FL3733_set_led_control_register(uint8_t index, bool red, bool green, bo void IS31FL3733_update_pwm_buffers(uint8_t addr, uint8_t index); void IS31FL3733_update_led_control_registers(uint8_t addr, uint8_t index); +#define PUR_0R 0x00 // No PUR resistor +#define PUR_05KR 0x02 // 0.5k Ohm resistor in t_NOL +#define PUR_3KR 0x03 // 3.0k Ohm resistor on all the time +#define PUR_4KR 0x04 // 4.0k Ohm resistor on all the time +#define PUR_8KR 0x05 // 8.0k Ohm resistor on all the time +#define PUR_16KR 0x06 // 16k Ohm resistor on all the time +#define PUR_32KR 0x07 // 32k Ohm resistor in t_NOL + #define A_1 0x00 #define A_2 0x01 #define A_3 0x02 diff --git a/drivers/led/issi/is31fl3736.c b/drivers/led/issi/is31fl3736.c index 7dece1b1eb..dcaabba2ef 100644 --- a/drivers/led/issi/is31fl3736.c +++ b/drivers/led/issi/is31fl3736.c @@ -1,4 +1,5 @@ /* Copyright 2018 Jason Williams (Wilba) + * Copyright 2021 Doni Crosby * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -54,6 +55,14 @@ # define ISSI_PERSISTENCE 0 #endif +#ifndef ISSI_SWPULLUP +# define ISSI_SWPULLUP PUR_0R +#endif + +#ifndef ISSI_CSPULLUP +# define ISSI_CSPULLUP PUR_0R +#endif + // Transfer buffer for TWITransmitData() uint8_t g_twi_transfer_buffer[20]; @@ -140,6 +149,10 @@ void IS31FL3736_init(uint8_t addr) { // Select PG3 IS31FL3736_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION); + // Set de-ghost pull-up resistors (SWx) + IS31FL3736_write_register(addr, ISSI_REG_SWPULLUP, ISSI_SWPULLUP); + // Set de-ghost pull-down resistors (CSx) + IS31FL3736_write_register(addr, ISSI_REG_CSPULLUP, ISSI_CSPULLUP); // Set global current to maximum. IS31FL3736_write_register(addr, ISSI_REG_GLOBALCURRENT, 0xFF); // Disable software shutdown. diff --git a/drivers/led/issi/is31fl3736.h b/drivers/led/issi/is31fl3736.h index c956c87f7c..a30be90556 100644 --- a/drivers/led/issi/is31fl3736.h +++ b/drivers/led/issi/is31fl3736.h @@ -1,4 +1,5 @@ /* Copyright 2018 Jason Williams (Wilba) + * Copyright 2021 Doni Crosby * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -60,6 +61,15 @@ void IS31FL3736_mono_set_led_control_register(uint8_t index, bool enabled); void IS31FL3736_update_pwm_buffers(uint8_t addr1, uint8_t addr2); void IS31FL3736_update_led_control_registers(uint8_t addr1, uint8_t addr2); +#define PUR_0R 0x00 // No PUR resistor +#define PUR_05KR 0x01 // 0.5k Ohm resistor +#define PUR_1KR 0x02 // 1.0k Ohm resistor +#define PUR_2KR 0x03 // 2.0k Ohm resistor +#define PUR_4KR 0x04 // 4.0k Ohm resistor +#define PUR_8KR 0x05 // 8.0k Ohm resistor +#define PUR_16KR 0x06 // 16k Ohm resistor +#define PUR_32KR 0x07 // 32k Ohm resistor + #define A_1 0x00 #define A_2 0x02 #define A_3 0x04 diff --git a/drivers/led/issi/is31fl3737.c b/drivers/led/issi/is31fl3737.c index 0bb4ddd425..62862e0d41 100644 --- a/drivers/led/issi/is31fl3737.c +++ b/drivers/led/issi/is31fl3737.c @@ -1,6 +1,7 @@ /* Copyright 2017 Jason Williams * Copyright 2018 Jack Humbert * Copyright 2018 Yiancar + * Copyright 2021 Doni Crosby * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -56,6 +57,14 @@ # define ISSI_PERSISTENCE 0 #endif +#ifndef ISSI_SWPULLUP +# define ISSI_SWPULLUP PUR_0R +#endif + +#ifndef ISSI_CSPULLUP +# define ISSI_CSPULLUP PUR_0R +#endif + // Transfer buffer for TWITransmitData() uint8_t g_twi_transfer_buffer[20]; @@ -143,6 +152,10 @@ void IS31FL3737_init(uint8_t addr) { // Select PG3 IS31FL3737_write_register(addr, ISSI_COMMANDREGISTER, ISSI_PAGE_FUNCTION); + // Set de-ghost pull-up resistors (SWx) + IS31FL3737_write_register(addr, ISSI_REG_SWPULLUP, ISSI_SWPULLUP); + // Set de-ghost pull-down resistors (CSx) + IS31FL3737_write_register(addr, ISSI_REG_CSPULLUP, ISSI_CSPULLUP); // Set global current to maximum. IS31FL3737_write_register(addr, ISSI_REG_GLOBALCURRENT, 0xFF); // Disable software shutdown. diff --git a/drivers/led/issi/is31fl3737.h b/drivers/led/issi/is31fl3737.h index 06886e9c9b..97917f1d4f 100644 --- a/drivers/led/issi/is31fl3737.h +++ b/drivers/led/issi/is31fl3737.h @@ -1,6 +1,7 @@ /* Copyright 2017 Jason Williams * Copyright 2018 Jack Humbert * Copyright 2018 Yiancar + * Copyright 2021 Doni Crosby * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -47,6 +48,15 @@ void IS31FL3737_set_led_control_register(uint8_t index, bool red, bool green, bo void IS31FL3737_update_pwm_buffers(uint8_t addr1, uint8_t addr2); void IS31FL3737_update_led_control_registers(uint8_t addr1, uint8_t addr2); +#define PUR_0R 0x00 // No PUR resistor +#define PUR_05KR 0x01 // 0.5k Ohm resistor in t_NOL +#define PUR_1KR 0x02 // 1.0k Ohm resistor in t_NOL +#define PUR_2KR 0x03 // 2.0k Ohm resistor in t_NOL +#define PUR_4KR 0x04 // 4.0k Ohm resistor in t_NOL +#define PUR_8KR 0x05 // 8.0k Ohm resistor in t_NOL +#define PUR_16KR 0x06 // 16k Ohm resistor in t_NOL +#define PUR_32KR 0x07 // 32k Ohm resistor in t_NOL + #define A_1 0x00 #define A_2 0x01 #define A_3 0x02 diff --git a/drivers/led/issi/is31fl3741.c b/drivers/led/issi/is31fl3741.c index 24a273514e..5084f3b9fc 100644 --- a/drivers/led/issi/is31fl3741.c +++ b/drivers/led/issi/is31fl3741.c @@ -61,6 +61,14 @@ # define ISSI_PERSISTENCE 0 #endif +#ifndef ISSI_SWPULLUP +# define ISSI_SWPULLUP PUR_32KR +#endif + +#ifndef ISSI_CSPULLUP +# define ISSI_CSPULLUP PUR_32KR +#endif + #define ISSI_MAX_LEDS 351 // Transfer buffer for TWITransmitData() @@ -157,7 +165,7 @@ void IS31FL3741_init(uint8_t addr) { // Set Golbal Current Control Register IS31FL3741_write_register(addr, ISSI_REG_GLOBALCURRENT, 0xFF); // Set Pull up & Down for SWx CSy - IS31FL3741_write_register(addr, ISSI_REG_PULLDOWNUP, 0x77); + IS31FL3741_write_register(addr, ISSI_REG_PULLDOWNUP, ((ISSI_CSPULLUP << 4) | ISSI_SWPULLUP)); // IS31FL3741_update_led_scaling_registers(addr, 0xFF, 0xFF, 0xFF); diff --git a/drivers/led/issi/is31fl3741.h b/drivers/led/issi/is31fl3741.h index 163a035233..563022b9b0 100644 --- a/drivers/led/issi/is31fl3741.h +++ b/drivers/led/issi/is31fl3741.h @@ -51,6 +51,15 @@ void IS31FL3741_set_scaling_registers(const is31_led *pled, uint8_t red, uint8_t void IS31FL3741_set_pwm_buffer(const is31_led *pled, uint8_t red, uint8_t green, uint8_t blue); +#define PUR_0R 0x00 // No PUR resistor +#define PUR_05KR 0x01 // 0.5k Ohm resistor +#define PUR_1KR 0x02 // 1.0k Ohm resistor +#define PUR_2KR 0x03 // 2.0k Ohm resistor +#define PUR_4KR 0x04 // 4.0k Ohm resistor +#define PUR_8KR 0x05 // 8.0k Ohm resistor +#define PUR_16KR 0x06 // 16k Ohm resistor +#define PUR_32KR 0x07 // 32k Ohm resistor + #define CS1_SW1 0x00 #define CS2_SW1 0x01 #define CS3_SW1 0x02 From 2173b5373c9d8d1b37d7b130e7a6c613ffc2ffaa Mon Sep 17 00:00:00 2001 From: Albert Y <76888457+filterpaper@users.noreply.github.com> Date: Tue, 2 Nov 2021 07:40:25 +0800 Subject: [PATCH 391/595] Add Pixel Rain RGB Matrix effect (#14155) * Add Pixel animation header file * Add Pixel animation to documentation * Add Pixel animation to core include file * Remove unintended spaces * Remove seeding of PRNG * Increase frequency of lit keys Co-authored-by: filterpaper --- docs/feature_rgb_matrix.md | 2 + .../rgb_matrix/animations/pixel_rain_anim.h | 44 +++++++++++++++++++ .../animations/rgb_matrix_effects.inc | 1 + 3 files changed, 47 insertions(+) create mode 100644 quantum/rgb_matrix/animations/pixel_rain_anim.h diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md index cad7c50f18..6370c637a2 100644 --- a/docs/feature_rgb_matrix.md +++ b/docs/feature_rgb_matrix.md @@ -454,6 +454,7 @@ enum rgb_matrix_effects { RGB_MATRIX_HUE_PENDULUM, // Hue shifts up a slight ammount in a wave to the right, then back to the left RGB_MATRIX_HUE_WAVE, // Hue shifts up a slight ammount and then back down in a wave to the right RGB_MATRIX_FRACTAL, // Single hue fractal filled keys pulsing horizontally out to edges + RGB_MATRIX_PIXEL_RAIN, // Randomly light keys with random hues #if define(RGB_MATRIX_FRAMEBUFFER_EFFECTS) RGB_MATRIX_TYPING_HEATMAP, // How hot is your WPM! RGB_MATRIX_DIGITAL_RAIN, // That famous computer simulation @@ -508,6 +509,7 @@ You can disable a single effect by defining `DISABLE_[EFFECT_NAME]` in your `con |`#define DISABLE_RGB_MATRIX_HUE_PENDULUM` |Disables `RGB_MATRIX_HUE_PENDULUM` | |`#define DISABLE_RGB_MATRIX_HUE_WAVE` |Disables `RGB_MATRIX_HUE_WAVE` | |`#define DISABLE_RGB_MATRIX_FRACTAL` |Disables `RGB_MATRIX_FRACTAL` | +|`#define DISABLE_RGB_MATRIX_PIXEL_RAIN ` |Disables `RGB_MATRIX_PIXEL_RAIN ` | |`#define DISABLE_RGB_MATRIX_TYPING_HEATMAP` |Disables `RGB_MATRIX_TYPING_HEATMAP` | |`#define DISABLE_RGB_MATRIX_DIGITAL_RAIN` |Disables `RGB_MATRIX_DIGITAL_RAIN` | |`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE` |Disables `RGB_MATRIX_SOLID_REACTIVE_SIMPLE` | diff --git a/quantum/rgb_matrix/animations/pixel_rain_anim.h b/quantum/rgb_matrix/animations/pixel_rain_anim.h new file mode 100644 index 0000000000..0209d33033 --- /dev/null +++ b/quantum/rgb_matrix/animations/pixel_rain_anim.h @@ -0,0 +1,44 @@ +/* Copyright (C) 2021 @filterpaper + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#ifdef ENABLE_RGB_MATRIX_PIXEL_RAIN +RGB_MATRIX_EFFECT(PIXEL_RAIN) +# ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS + +static bool PIXEL_RAIN(effect_params_t* params) { + static uint32_t wait_timer = 0; + if (wait_timer > g_rgb_timer) { return false; } + + inline uint32_t interval(void) { return 500 / scale16by8(qadd8(rgb_matrix_config.speed, 16), 16); } + + bool rain_pixel(uint8_t i, effect_params_t* params, bool off) { + if (!HAS_ANY_FLAGS(g_led_config.flags[i], params->flags)) { return true; } + if (off) { + rgb_matrix_set_color(i, 0,0,0); + } else { + HSV hsv = {random8(), qadd8(random8() >> 1, 127), rgb_matrix_config.hsv.v}; + RGB rgb = rgb_matrix_hsv_to_rgb(hsv); + rgb_matrix_set_color(i, rgb.r, rgb.g, rgb.b); + } + wait_timer = g_rgb_timer + interval(); + return false; + } + + return rain_pixel(mod8(random8(), DRIVER_LED_TOTAL), params, random8() & 2); +} + +# endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS +#endif // ENABLE_RGB_MATRIX_PIXEL_RAIN diff --git a/quantum/rgb_matrix/animations/rgb_matrix_effects.inc b/quantum/rgb_matrix/animations/rgb_matrix_effects.inc index 33d2b42286..8ecf4367ff 100644 --- a/quantum/rgb_matrix/animations/rgb_matrix_effects.inc +++ b/quantum/rgb_matrix/animations/rgb_matrix_effects.inc @@ -27,6 +27,7 @@ #include "hue_pendulum_anim.h" #include "hue_wave_anim.h" #include "fractal_anim.h" +#include "pixel_rain_anim.h" #include "typing_heatmap_anim.h" #include "digital_rain_anim.h" #include "solid_reactive_simple_anim.h" From 4bc1b1248086ce8f7e85c2a8bf7575774caf93fb Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Mon, 1 Nov 2021 18:52:46 -0700 Subject: [PATCH 392/595] [Keyboard] Fix missing return for oled task on Lefty (#15010) --- keyboards/lefty/lefty.c | 1 + 1 file changed, 1 insertion(+) diff --git a/keyboards/lefty/lefty.c b/keyboards/lefty/lefty.c index 26f5d0496a..a3e5301ea1 100644 --- a/keyboards/lefty/lefty.c +++ b/keyboards/lefty/lefty.c @@ -42,5 +42,6 @@ bool oled_task_kb(void) { oled_write_ln_P(PSTR("Undefined"), false); } + return true; } #endif From 8812e3724aeb1f2d6018ba080aa4f2179b00b178 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Mon, 1 Nov 2021 19:30:23 -0700 Subject: [PATCH 393/595] [Keyboard] Fix missing return for oled task on Arabica37 (#15011) --- keyboards/arabica37/keymaps/default/keymap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/keyboards/arabica37/keymaps/default/keymap.c b/keyboards/arabica37/keymaps/default/keymap.c index 47c14379e1..5a7a3c2738 100644 --- a/keyboards/arabica37/keymaps/default/keymap.c +++ b/keyboards/arabica37/keymaps/default/keymap.c @@ -177,7 +177,6 @@ bool oled_task_user(void) { oled_write_P(led_state.num_lock ? PSTR("NUM ") : PSTR(" "), false); oled_write_P(led_state.caps_lock ? PSTR("CAP ") : PSTR(" "), false); oled_write_P(led_state.scroll_lock ? PSTR("SCR ") : PSTR(" "), false); - return false; } @@ -196,5 +195,6 @@ bool oled_task_user(void) { } else { render_logo(); // Renders a static logo } + return false; } #endif From 89e5e4e7ad420332ddd05995154f8eafa4228794 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Mon, 1 Nov 2021 19:31:15 -0700 Subject: [PATCH 394/595] [Keymap] Fix missing return for oled task in drashna userspace (#15012) --- users/drashna/oled_stuff.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/users/drashna/oled_stuff.c b/users/drashna/oled_stuff.c index 7ccdfc98ac..69d1d64b79 100644 --- a/users/drashna/oled_stuff.c +++ b/users/drashna/oled_stuff.c @@ -427,7 +427,7 @@ bool oled_task_user(void) { if (is_keyboard_master()) { if (timer_elapsed32(oled_timer) > 30000) { oled_off(); - return; + return false; } else { oled_on(); } From d05b3da83ebecc52b0b731fee13de4d44a9f6d30 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Mon, 1 Nov 2021 19:31:43 -0700 Subject: [PATCH 395/595] [Bug] Fix unterminated ifdef in ISSI 3733 driver (#15014) --- drivers/led/issi/is31fl3733.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/led/issi/is31fl3733.c b/drivers/led/issi/is31fl3733.c index c64d035135..371010fd81 100644 --- a/drivers/led/issi/is31fl3733.c +++ b/drivers/led/issi/is31fl3733.c @@ -59,6 +59,8 @@ #ifndef ISSI_PWM_FREQUENCY # define ISSI_PWM_FREQUENCY 0b000 // PFS - IS31FL3733B only +#endif + #ifndef ISSI_SWPULLUP # define ISSI_SWPULLUP PUR_0R #endif From 72f94daae1b75c3b29e76c8124913fc40ef7e7d1 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Mon, 1 Nov 2021 21:36:00 -0700 Subject: [PATCH 396/595] [Keyboard] Fix compilation size issues for Canary 60 RGB (#15016) --- keyboards/canary/canary60rgb/v1/rules.mk | 2 ++ 1 file changed, 2 insertions(+) diff --git a/keyboards/canary/canary60rgb/v1/rules.mk b/keyboards/canary/canary60rgb/v1/rules.mk index d0b5fab7f4..c96834cc81 100644 --- a/keyboards/canary/canary60rgb/v1/rules.mk +++ b/keyboards/canary/canary60rgb/v1/rules.mk @@ -21,3 +21,5 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output RGB_MATRIX_ENABLE = yes # Use RGB matrix RGB_MATRIX_DRIVER = IS31FL3733 + +LTO_ENABLE = yes From 85d94d0c4d97de3d1b7ce0476499f44e79c25944 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Mon, 1 Nov 2021 21:43:43 -0700 Subject: [PATCH 397/595] [Keyboard] Fix size issues on pistachio pro via keymap (#15017) --- keyboards/pistachio_pro/keymaps/via/rules.mk | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/keyboards/pistachio_pro/keymaps/via/rules.mk b/keyboards/pistachio_pro/keymaps/via/rules.mk index 036bd6d1c3..36b7ba9cbc 100644 --- a/keyboards/pistachio_pro/keymaps/via/rules.mk +++ b/keyboards/pistachio_pro/keymaps/via/rules.mk @@ -1 +1,2 @@ -VIA_ENABLE = yes \ No newline at end of file +VIA_ENABLE = yes +LTO_ENABLE = yes From 76fb54403ccd3ebaf1ca49c5172335e3593c5c5c Mon Sep 17 00:00:00 2001 From: Purdea Andrei Date: Tue, 2 Nov 2021 07:54:29 +0200 Subject: [PATCH 398/595] haptic: Feature to disable it when usb port is not configured or suspended. (#12692) This also add support for specifying a LED pin to indicate haptic status, and also adds support for a haptic-enable pin, which is useful to turn off the boost converter on the solenoid driver. --- docs/feature_haptic_feedback.md | 11 +++++ drivers/haptic/solenoid.c | 16 +++++--- drivers/haptic/solenoid.h | 8 ++++ quantum/haptic.c | 51 ++++++++++++++++++++++-- quantum/haptic.h | 27 +++++++++++++ quantum/process_keycode/process_haptic.c | 3 +- tmk_core/protocol/usb_device_state.c | 10 ++++- 7 files changed, 115 insertions(+), 11 deletions(-) diff --git a/docs/feature_haptic_feedback.md b/docs/feature_haptic_feedback.md index 4054c5d9b7..159296a297 100644 --- a/docs/feature_haptic_feedback.md +++ b/docs/feature_haptic_feedback.md @@ -11,6 +11,16 @@ HAPTIC_DRIVER += DRV2605L HAPTIC_DRIVER += SOLENOID ``` +The following `config.h` settings are available for all types of haptic feedback: + +| Settings | Default | Description | +|--------------------------------------|---------------|---------------------------------------------------------------------------------------------------------------| +|`HAPTIC_ENABLE_PIN` | *Not defined* |Configures a pin to enable a boost converter for some haptic solution, often used with solenoid drivers. | +|`HAPTIC_ENABLE_PIN_ACTIVE_LOW` | *Not defined* |If defined then the haptic enable pin is active-low. | +|`HAPTIC_ENABLE_STATUS_LED` | *Not defined* |Configures a pin to reflect the current enabled/disabled status of haptic feedback. | +|`HAPTIC_ENABLE_STATUS_LED_ACTIVE_LOW` | *Not defined* |If defined then the haptic status led will be active-low. | +|`HAPTIC_OFF_IN_LOW_POWER` | `0` |If set to `1`, haptic feedback is disabled before the device is configured, and while the device is suspended. | + ## Known Supported Hardware | Name | Description | @@ -48,6 +58,7 @@ First you will need a build a circuit to drive the solenoid through a mosfet as | Settings | Default | Description | |----------------------------|----------------------|-------------------------------------------------------| |`SOLENOID_PIN` | *Not defined* |Configures the pin that the Solenoid is connected to. | +|`SOLENOID_PIN_ACTIVE_LOW` | *Not defined* |If defined then the solenoid trigger pin is active low.| |`SOLENOID_DEFAULT_DWELL` | `12` ms |Configures the default dwell time for the solenoid. | |`SOLENOID_MIN_DWELL` | `4` ms |Sets the lower limit for the dwell. | |`SOLENOID_MAX_DWELL` | `100` ms |Sets the upper limit for the dwell. | diff --git a/drivers/haptic/solenoid.c b/drivers/haptic/solenoid.c index 25cf344655..7a09940f78 100644 --- a/drivers/haptic/solenoid.c +++ b/drivers/haptic/solenoid.c @@ -19,6 +19,7 @@ #include "solenoid.h" #include "haptic.h" #include "gpio.h" +#include "usb_device_state.h" bool solenoid_on = false; bool solenoid_buzzing = false; @@ -36,7 +37,7 @@ void solenoid_set_buzz(int buzz) { haptic_set_buzz(buzz); } void solenoid_set_dwell(uint8_t dwell) { solenoid_dwell = dwell; } void solenoid_stop(void) { - writePinLow(SOLENOID_PIN); + SOLENOID_PIN_WRITE_INACTIVE(); solenoid_on = false; solenoid_buzzing = false; } @@ -48,7 +49,7 @@ void solenoid_fire(void) { solenoid_on = true; solenoid_buzzing = true; solenoid_start = timer_read(); - writePinHigh(SOLENOID_PIN); + SOLENOID_PIN_WRITE_ACTIVE(); } void solenoid_check(void) { @@ -69,20 +70,23 @@ void solenoid_check(void) { if ((elapsed % (SOLENOID_BUZZ_ACTUATED + SOLENOID_BUZZ_NONACTUATED)) < SOLENOID_BUZZ_ACTUATED) { if (!solenoid_buzzing) { solenoid_buzzing = true; - writePinHigh(SOLENOID_PIN); + SOLENOID_PIN_WRITE_ACTIVE(); } } else { if (solenoid_buzzing) { solenoid_buzzing = false; - writePinLow(SOLENOID_PIN); + SOLENOID_PIN_WRITE_INACTIVE(); } } } } void solenoid_setup(void) { + SOLENOID_PIN_WRITE_INACTIVE(); setPinOutput(SOLENOID_PIN); - solenoid_fire(); + if ((!HAPTIC_OFF_IN_LOW_POWER) || (usb_device_state == USB_DEVICE_STATE_CONFIGURED)) { + solenoid_fire(); + } } -void solenoid_shutdown(void) { writePinLow(SOLENOID_PIN); } +void solenoid_shutdown(void) { SOLENOID_PIN_WRITE_INACTIVE(); } diff --git a/drivers/haptic/solenoid.h b/drivers/haptic/solenoid.h index f2a3bc4c30..653148154f 100644 --- a/drivers/haptic/solenoid.h +++ b/drivers/haptic/solenoid.h @@ -49,6 +49,14 @@ # error SOLENOID_PIN not defined #endif +#ifdef SOLENOID_PIN_ACTIVE_LOW +# define SOLENOID_PIN_WRITE_ACTIVE() writePinLow(SOLENOID_PIN) +# define SOLENOID_PIN_WRITE_INACTIVE() writePinHigh(SOLENOID_PIN) +#else +# define SOLENOID_PIN_WRITE_ACTIVE() writePinHigh(SOLENOID_PIN) +# define SOLENOID_PIN_WRITE_INACTIVE() writePinLow(SOLENOID_PIN) +#endif + void solenoid_buzz_on(void); void solenoid_buzz_off(void); void solenoid_set_buzz(int buzz); diff --git a/quantum/haptic.c b/quantum/haptic.c index 65abcc15fa..f915acf946 100644 --- a/quantum/haptic.c +++ b/quantum/haptic.c @@ -17,6 +17,8 @@ #include "haptic.h" #include "eeconfig.h" #include "debug.h" +#include "usb_device_state.h" +#include "gpio.h" #ifdef DRV2605L # include "DRV2605L.h" #endif @@ -26,6 +28,29 @@ haptic_config_t haptic_config; +static void update_haptic_enable_gpios(void) { + if (haptic_config.enable && ((!HAPTIC_OFF_IN_LOW_POWER) || (usb_device_state == USB_DEVICE_STATE_CONFIGURED))) { +#if defined(HAPTIC_ENABLE_PIN) + HAPTIC_ENABLE_PIN_WRITE_ACTIVE(); +#endif +#if defined(HAPTIC_ENABLE_STATUS_LED) + HAPTIC_ENABLE_STATUS_LED_WRITE_ACTIVE(); +#endif + } else { +#if defined(HAPTIC_ENABLE_PIN) + HAPTIC_ENABLE_PIN_WRITE_INACTIVE(); +#endif +#if defined(HAPTIC_ENABLE_STATUS_LED) + HAPTIC_ENABLE_STATUS_LED_WRITE_INACTIVE(); +#endif + } +} + +static void set_haptic_config_enable(bool enabled) { + haptic_config.enable = enabled; + update_haptic_enable_gpios(); +} + void haptic_init(void) { if (!eeconfig_is_enabled()) { eeconfig_init(); @@ -44,6 +69,10 @@ void haptic_init(void) { // or the previous firmware didn't have solenoid enabled, // and the current one has solenoid enabled. haptic_reset(); + } else { + // Haptic configuration has been loaded through the "raw" union item. + // This is to execute any side effects of the configuration. + set_haptic_config_enable(haptic_config.enable); } #ifdef SOLENOID_ENABLE solenoid_setup(); @@ -54,6 +83,12 @@ void haptic_init(void) { dprintf("DRV2605 driver initialized\n"); #endif eeconfig_debug_haptic(); +#ifdef HAPTIC_ENABLE_PIN + setPinOutput(HAPTIC_ENABLE_PIN); +#endif +#ifdef HAPTIC_ENABLE_STATUS_LED + setPinOutput(HAPTIC_ENABLE_STATUS_LED); +#endif } void haptic_task(void) { @@ -69,13 +104,13 @@ void eeconfig_debug_haptic(void) { } void haptic_enable(void) { - haptic_config.enable = 1; + set_haptic_config_enable(true); xprintf("haptic_config.enable = %u\n", haptic_config.enable); eeconfig_update_haptic(haptic_config.raw); } void haptic_disable(void) { - haptic_config.enable = 0; + set_haptic_config_enable(false); xprintf("haptic_config.enable = %u\n", haptic_config.enable); eeconfig_update_haptic(haptic_config.raw); } @@ -157,7 +192,7 @@ void haptic_dwell_decrease(void) { } void haptic_reset(void) { - haptic_config.enable = true; + set_haptic_config_enable(true); uint8_t feedback = HAPTIC_FEEDBACK_DEFAULT; haptic_config.feedback = feedback; #ifdef DRV2605L @@ -293,3 +328,13 @@ void haptic_shutdown(void) { solenoid_shutdown(); #endif } + +void haptic_notify_usb_device_state_change(void) { + update_haptic_enable_gpios(); +#if defined(HAPTIC_ENABLE_PIN) + setPinOutput(HAPTIC_ENABLE_PIN); +#endif +#if defined(HAPTIC_ENABLE_STATUS_LED) + setPinOutput(HAPTIC_ENABLE_STATUS_LED); +#endif +} diff --git a/quantum/haptic.h b/quantum/haptic.h index fc7ca2f3e6..7d70a01333 100644 --- a/quantum/haptic.h +++ b/quantum/haptic.h @@ -75,3 +75,30 @@ void haptic_cont_decrease(void); void haptic_play(void); void haptic_shutdown(void); +void haptic_notify_usb_device_state_change(void); + +#ifdef HAPTIC_ENABLE_PIN_ACTIVE_LOW +# ifndef HAPTIC_ENABLE_PIN +# error HAPTIC_ENABLE_PIN not defined +# endif +# define HAPTIC_ENABLE_PIN_WRITE_ACTIVE() writePinLow(HAPTIC_ENABLE_PIN) +# define HAPTIC_ENABLE_PIN_WRITE_INACTIVE() writePinHigh(HAPTIC_ENABLE_PIN) +#else +# define HAPTIC_ENABLE_PIN_WRITE_ACTIVE() writePinHigh(HAPTIC_ENABLE_PIN) +# define HAPTIC_ENABLE_PIN_WRITE_INACTIVE() writePinLow(HAPTIC_ENABLE_PIN) +#endif + +#ifdef HAPTIC_ENABLE_STATUS_LED_ACTIVE_LOW +# ifndef HAPTIC_ENABLE_STATUS_LED +# error HAPTIC_ENABLE_STATUS_LED not defined +# endif +# define HAPTIC_ENABLE_STATUS_LED_WRITE_ACTIVE() writePinLow(HAPTIC_ENABLE_STATUS_LED) +# define HAPTIC_ENABLE_STATUS_LED_WRITE_INACTIVE() writePinHigh(HAPTIC_ENABLE_STATUS_LED) +#else +# define HAPTIC_ENABLE_STATUS_LED_WRITE_ACTIVE() writePinHigh(HAPTIC_ENABLE_STATUS_LED) +# define HAPTIC_ENABLE_STATUS_LED_WRITE_INACTIVE() writePinLow(HAPTIC_ENABLE_STATUS_LED) +#endif + +#ifndef HAPTIC_OFF_IN_LOW_POWER +# define HAPTIC_OFF_IN_LOW_POWER 0 +#endif diff --git a/quantum/process_keycode/process_haptic.c b/quantum/process_keycode/process_haptic.c index 1b9c2f24fa..466c8e5543 100644 --- a/quantum/process_keycode/process_haptic.c +++ b/quantum/process_keycode/process_haptic.c @@ -17,6 +17,7 @@ #include "process_haptic.h" #include "quantum_keycodes.h" #include "action_tapping.h" +#include "usb_device_state.h" __attribute__((weak)) bool get_haptic_enabled_key(uint16_t keycode, keyrecord_t *record) { switch (keycode) { @@ -131,7 +132,7 @@ bool process_haptic(uint16_t keycode, keyrecord_t *record) { } } - if (haptic_get_enable()) { + if (haptic_get_enable() && ((!HAPTIC_OFF_IN_LOW_POWER) || (usb_device_state == USB_DEVICE_STATE_CONFIGURED))) { if (record->event.pressed) { // keypress if (haptic_get_feedback() < 2 && get_haptic_enabled_key(keycode, record)) { diff --git a/tmk_core/protocol/usb_device_state.c b/tmk_core/protocol/usb_device_state.c index 5ccd309ec2..84f01943be 100644 --- a/tmk_core/protocol/usb_device_state.c +++ b/tmk_core/protocol/usb_device_state.c @@ -16,6 +16,9 @@ */ #include "usb_device_state.h" +#if defined(HAPTIC_ENABLE) +# include "haptic.h" +#endif enum usb_device_state usb_device_state = USB_DEVICE_STATE_NO_INIT; @@ -23,7 +26,12 @@ __attribute__((weak)) void notify_usb_device_state_change_kb(enum usb_device_sta __attribute__((weak)) void notify_usb_device_state_change_user(enum usb_device_state usb_device_state) {} -static void notify_usb_device_state_change(enum usb_device_state usb_device_state) { notify_usb_device_state_change_kb(usb_device_state); } +static void notify_usb_device_state_change(enum usb_device_state usb_device_state) { +#if defined(HAPTIC_ENABLE) && HAPTIC_OFF_IN_LOW_POWER + haptic_notify_usb_device_state_change(); +#endif + notify_usb_device_state_change_kb(usb_device_state); +} void usb_device_state_set_configuration(bool isConfigured, uint8_t configurationNumber) { usb_device_state = isConfigured ? USB_DEVICE_STATE_CONFIGURED : USB_DEVICE_STATE_INIT; From 2761b17b9869b60a739da6e793dd10a9af9e0feb Mon Sep 17 00:00:00 2001 From: Albert Y <76888457+filterpaper@users.noreply.github.com> Date: Tue, 2 Nov 2021 14:19:01 +0800 Subject: [PATCH 399/595] Clarify placement of configuration options (#15015) Co-authored-by: filterpaper --- docs/feature_oled_driver.md | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/docs/feature_oled_driver.md b/docs/feature_oled_driver.md index 908bd801c4..6d82aa0f59 100644 --- a/docs/feature_oled_driver.md +++ b/docs/feature_oled_driver.md @@ -146,6 +146,11 @@ void oled_task_user(void) { ## Basic Configuration +These configuration options should be placed in `config.h`. Example: +```c +#define OLED_BRIGHTNESS 128 +``` + |Define |Default |Description | |---------------------------|-----------------|--------------------------------------------------------------------------------------------------------------------------| |`OLED_DISPLAY_ADDRESS` |`0x3C` |The i2c address of the OLED Display | From 87fc950707be430a74db67c0963a588d908b8447 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Tue, 2 Nov 2021 08:26:28 +0000 Subject: [PATCH 400/595] Add Redox Media Configurator Data (#15013) --- keyboards/redox_media/config.h | 4 +- keyboards/redox_media/info.json | 89 +++++++++++++++++++++++++++++ keyboards/redox_media/redox_media.h | 59 +++++++++++++------ 3 files changed, 132 insertions(+), 20 deletions(-) create mode 100644 keyboards/redox_media/info.json diff --git a/keyboards/redox_media/config.h b/keyboards/redox_media/config.h index 70fb2aa164..0d4ac16b5f 100644 --- a/keyboards/redox_media/config.h +++ b/keyboards/redox_media/config.h @@ -24,7 +24,7 @@ along with this program. If not, see . #define PRODUCT_ID 0x0000 #define DEVICE_VER 0x0100 #define MANUFACTURER shiftux -#define PRODUCT The Redox Keyboard +#define PRODUCT Redox Media /* key matrix size */ // Rows are doubled-up @@ -57,4 +57,4 @@ along with this program. If not, see . #define ENCODERS_PAD_A { F4 } #define ENCODERS_PAD_B { F5 } -#define ENCODER_RESOLUTION 4 \ No newline at end of file +#define ENCODER_RESOLUTION 4 diff --git a/keyboards/redox_media/info.json b/keyboards/redox_media/info.json new file mode 100644 index 0000000000..e13487e791 --- /dev/null +++ b/keyboards/redox_media/info.json @@ -0,0 +1,89 @@ +{ + "keyboard_name": "Redox Media", + "url": "", + "maintainer": "shiftux", + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"Mute", "x":5.25, "y":0.15}, + {"label":"Play", "x":12.25, "y":0.15}, + {"label":"Next", "x":13.5, "y":0}, + + {"label":"_Nav || `", "x":0, "y":1.375, "w":1.25}, + {"label":"1", "x":1.25, "y":1.375}, + {"label":"2", "x":2.25, "y":1.125}, + {"label":"3", "x":3.25, "y":1}, + {"label":"4", "x":4.25, "y":1.125}, + {"label":"5", "x":5.25, "y":1.25}, + {"label":"6", "x":12.25, "y":1.25}, + {"label":"7", "x":13.25, "y":1.125}, + {"label":"8", "x":14.25, "y":1}, + {"label":"9", "x":15.25, "y":1.125}, + {"label":"0", "x":16.25, "y":1.375}, + {"label":"_Nav || -", "x":17.25, "y":1.375, "w":1.25}, + + {"label":"Tab", "x":0, "y":2.375, "w":1.25}, + {"label":"Q", "x":1.25, "y":2.375}, + {"label":"W", "x":2.25, "y":2.125}, + {"label":"E", "x":3.25, "y":2}, + {"label":"R", "x":4.25, "y":2.125}, + {"label":"T", "x":5.25, "y":2.25}, + {"label":"MO(_SYMB)", "x":6.25, "y":1.75}, + {"label":"MO(_SYMB)", "x":11.25, "y":1.75}, + {"label":"Y", "x":12.25, "y":2.25}, + {"label":"U", "x":13.25, "y":2.125}, + {"label":"I", "x":14.25, "y":2}, + {"label":"O", "x":15.25, "y":2.125}, + {"label":"P", "x":16.25, "y":2.375}, + {"label":"=", "x":17.25, "y":2.375, "w":1.25}, + + {"label":"Esc", "x":0, "y":3.375, "w":1.25}, + {"label":"A", "x":1.25, "y":3.375}, + {"label":"S", "x":2.25, "y":3.125}, + {"label":"D", "x":3.25, "y":3}, + {"label":"F", "x":4.25, "y":3.125}, + {"label":"G", "x":5.25, "y":3.25}, + {"label":"[", "x":6.25, "y":3}, + {"label":"]", "x":11.25, "y":3}, + {"label":"H", "x":12.25, "y":3.25}, + {"label":"J", "x":13.25, "y":3.125}, + {"label":"K", "x":14.25, "y":3}, + {"label":"L", "x":15.25, "y":3.125}, + {"label":";", "x":16.25, "y":3.375}, + {"label":"'", "x":17.25, "y":3.375, "w":1.25}, + + {"label":"Shift", "x":0, "y":4.375, "w":1.25}, + {"label":"Z", "x":1.25, "y":4.375}, + {"label":"X", "x":2.25, "y":4.125}, + {"label":"C", "x":3.25, "y":4}, + {"label":"V", "x":4.25, "y":4.125}, + {"label":"B", "x":5.25, "y":4.25}, + {"label":"_Adjust/Page Up", "x":6.75, "y":4.75}, + {"label":"Page Down", "x":7.75, "y":4.75}, + {"label":"Home", "x":9.75, "y":4.75}, + {"label":"_Adjust/End", "x":10.75, "y":4.75}, + {"label":"N", "x":12.25, "y":4.25}, + {"label":"M", "x":13.25, "y":4.125}, + {"label":",", "x":14.25, "y":4}, + {"label":",", "x":15.25, "y":4.125}, + {"label":"\\", "x":16.25, "y":4.375}, + {"label":"Shift", "x":17.25, "y":4.375, "w":1.25}, + + {"label":"LGUI", "x":0.25, "y":5.375}, + {"label":"P+", "x":1.25, "y":5.375}, + {"label":"P-", "x":2.25, "y":5.125}, + {"label":"LAlt || P*", "x":3.25, "y":5}, + {"label":"LCtrl || P/", "x":5.5, "y":6.25, "w":1.25}, + {"label":"Backspace", "x":6.75, "y":5.75, "h":1.5}, + {"label":"Delete", "x":7.75, "y":5.75, "h":1.5}, + {"label":"Enter", "x":9.75, "y":5.75, "h":1.5}, + {"label":"Space", "x":10.75, "y":5.75, "h":1.5}, + {"label":"RAlt", "x":11.75, "y":6.25, "w":1.25}, + {"label":"Left", "x":14.25, "y":5}, + {"label":"Down", "x":15.25, "y":5.125}, + {"label":"Up", "x":16.25, "y":5.375}, + {"label":"Right", "x":17.25, "y":5.375} + ] + } + } +} diff --git a/keyboards/redox_media/redox_media.h b/keyboards/redox_media/redox_media.h index 6188aa9a10..8cd13c63f2 100644 --- a/keyboards/redox_media/redox_media.h +++ b/keyboards/redox_media/redox_media.h @@ -19,28 +19,51 @@ along with this program. If not, see . #include "quantum.h" +#define XXX KC_NO + +/* + * ┌───┐ ┌───┐┌───┐ + * │56 │ │B6 ││B5 │ + * └───┘ └───┘└───┘ + * ┌───┬───┬───┬───┬───┬───┐ ┌───┬───┬───┬───┬───┬───┐ + * │00 │01 │02 │03 │04 │05 │ │65 │64 │63 │62 │61 │60 │ + * ├───┼───┼───┼───┼───┼───┼───┐ ┌───┼───┼───┼───┼───┼───┼───┤ + * │10 │11 │12 │13 │14 │15 │06 │ │66 │75 │74 │73 │72 │71 │70 │ + * ├───┼───┼───┼───┼───┼───┼───┤ ├───┼───┼───┼───┼───┼───┼───┤ + * │20 │21 │22 │23 │24 │25 │16 │ │76 │85 │84 │83 │82 │81 │80 │ + * ├───┼───┼───┼───┼───┼───┼───┘ └───┼───┼───┼───┼───┼───┼───┤ + * │30 │31 │32 │33 │34 │35 │ ┌───┬───┐ ┌───┬───┐ │95 │94 │93 │92 │91 │90 │ + * ├───┼───┼───┼───┼───┴───┘ │26 │36 │ │96 │86 │ └───┴───┼───┼───┼───┼───┤ + * │40 │41 │42 │43 │ ├───┼───┤ ├───┼───┤ │A3 │A2 │A1 │A0 │ + * └───┴───┴───┴───┘ ┌────┤ │ │ │ │ ├────┐ └───┴───┴───┴───┘ + * │44 │45 │46 │ │A6 │A5 │A4 │ + * └────┴───┴───┘ └───┴───┴────┘ + * + * + */ + // rows are doubled // clang-format off #define LAYOUT( \ - R5C6, R11C6, R11C5, \ - R0C0, R0C1, R0C2, R0C3, R0C4, R0C5, R6C5, R6C4, R6C3, R6C2, R6C1, R6C0, \ - R1C0, R1C1, R1C2, R1C3, R1C4, R1C5, R0C6, R6C6, R7C5, R7C4, R7C3, R7C2, R7C1, R7C0, \ - R2C0, R2C1, R2C2, R2C3, R2C4, R2C5, R1C6, R7C6, R8C5, R8C4, R8C3, R8C2, R8C1, R8C0, \ - R3C0, R3C1, R3C2, R3C3, R3C4, R3C5, R2C6, R3C6, R9C6, R8C6, R9C5, R9C4, R9C3, R9C2, R9C1, R9C0, \ - R4C0, R4C1, R4C2, R4C3, R4C4, R4C5, R4C6, R10C6, R10C5, R10C4, R10C3, R10C2, R10C1, R10C0 \ + K56, KB6, KB5, \ + K00, K01, K02, K03, K04, K05, K65, K64, K63, K62, K61, K60, \ + K10, K11, K12, K13, K14, K15, K06, K66, K75, K74, K73, K72, K71, K70, \ + K20, K21, K22, K23, K24, K25, K16, K76, K85, K84, K83, K82, K81, K80, \ + K30, K31, K32, K33, K34, K35, K26, K36, K96, K86, K95, K94, K93, K92, K91, K90, \ + K40, K41, K42, K43, K44, K45, K46, KA6, KA5, KA4, KA3, KA2, KA1, KA0 \ ) \ { \ - { R0C0, R0C1, R0C2, R0C3, R0C4, R0C5, R0C6 }, \ - { R1C0, R1C1, R1C2, R1C3, R1C4, R1C5, R1C6 }, \ - { R2C0, R2C1, R2C2, R2C3, R2C4, R2C5, R2C6 }, \ - { R3C0, R3C1, R3C2, R3C3, R3C4, R3C5, R3C6 }, \ - { R4C0, R4C1, R4C2, R4C3, R4C4, R4C5, R4C6 }, \ - { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, R5C6 }, \ + { K00, K01, K02, K03, K04, K05, K06 }, \ + { K10, K11, K12, K13, K14, K15, K16 }, \ + { K20, K21, K22, K23, K24, K25, K26 }, \ + { K30, K31, K32, K33, K34, K35, K36 }, \ + { K40, K41, K42, K43, K44, K45, K46 }, \ + { XXX, XXX, XXX, XXX, XXX, XXX, K56 }, \ \ - { R6C0, R6C1, R6C2, R6C3, R6C4, R6C5, R6C6 }, \ - { R7C0, R7C1, R7C2, R7C3, R7C4, R7C5, R7C6 }, \ - { R8C0, R8C1, R8C2, R8C3, R8C4, R8C5, R8C6 }, \ - { R9C0, R9C1, R9C2, R9C3, R9C4, R9C5, R9C6 }, \ - { R10C0, R10C1, R10C2, R10C3, R10C4, R10C5, R10C6 }, \ - { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, R11C5, R11C6 } \ + { K60, K61, K62, K63, K64, K65, K66 }, \ + { K70, K71, K72, K73, K74, K75, K76 }, \ + { K80, K81, K82, K83, K84, K85, K86 }, \ + { K90, K91, K92, K93, K94, K95, K96 }, \ + { KA0, KA1, KA2, KA3, KA4, KA5, KA6 }, \ + { XXX, XXX, XXX, XXX, XXX, KB5, KB6 } \ } From 2326c8f74778551febc68c5c1767755fc30e1388 Mon Sep 17 00:00:00 2001 From: Purdea Andrei Date: Tue, 2 Nov 2021 11:49:23 +0200 Subject: [PATCH 401/595] overnumpad controller: Add support for turning off solenoid enable in low power. (#15021) --- keyboards/ibm/model_m_4th_gen/overnumpad_1xb/config.h | 2 ++ keyboards/ibm/model_m_4th_gen/overnumpad_1xb/overnumpad_1xb.c | 4 ---- .../unicomp/classic_ultracl_post_2013/overnumpad_1xb/config.h | 2 ++ .../classic_ultracl_post_2013/overnumpad_1xb/overnumpad_1xb.c | 4 ---- .../unicomp/classic_ultracl_pre_2013/overnumpad_1xb/config.h | 2 ++ .../classic_ultracl_pre_2013/overnumpad_1xb/overnumpad_1xb.c | 4 ---- .../unicomp/spacesaver_m_post_2013/overnumpad_1xb/config.h | 2 ++ .../spacesaver_m_post_2013/overnumpad_1xb/overnumpad_1xb.c | 3 --- .../unicomp/spacesaver_m_pre_2013/overnumpad_1xb/config.h | 2 ++ .../spacesaver_m_pre_2013/overnumpad_1xb/overnumpad_1xb.c | 3 --- 10 files changed, 10 insertions(+), 18 deletions(-) diff --git a/keyboards/ibm/model_m_4th_gen/overnumpad_1xb/config.h b/keyboards/ibm/model_m_4th_gen/overnumpad_1xb/config.h index 0dca4f6bc6..df30e84aca 100644 --- a/keyboards/ibm/model_m_4th_gen/overnumpad_1xb/config.h +++ b/keyboards/ibm/model_m_4th_gen/overnumpad_1xb/config.h @@ -64,8 +64,10 @@ #define STM32_HSECLK 16000000 #define SOLENOID_PIN B5 +#define HAPTIC_ENABLE_PIN C13 #define SOLENOID_DEFAULT_DWELL 4 #define SOLENOID_MIN_DWELL 4 +#define HAPTIC_OFF_IN_LOW_POWER 1 #define NO_HAPTIC_MOD #define LED_NUM_LOCK_PIN C12 diff --git a/keyboards/ibm/model_m_4th_gen/overnumpad_1xb/overnumpad_1xb.c b/keyboards/ibm/model_m_4th_gen/overnumpad_1xb/overnumpad_1xb.c index c4229ef997..cb5ec3dc12 100644 --- a/keyboards/ibm/model_m_4th_gen/overnumpad_1xb/overnumpad_1xb.c +++ b/keyboards/ibm/model_m_4th_gen/overnumpad_1xb/overnumpad_1xb.c @@ -18,10 +18,6 @@ void keyboard_post_init_kb(void) { - // Solenoid enable: - setPinOutput(C13); - writePin(C13, 1); - //debug_enable=true; //debug_matrix=true; } diff --git a/keyboards/unicomp/classic_ultracl_post_2013/overnumpad_1xb/config.h b/keyboards/unicomp/classic_ultracl_post_2013/overnumpad_1xb/config.h index fb9a872299..feb2e32d57 100644 --- a/keyboards/unicomp/classic_ultracl_post_2013/overnumpad_1xb/config.h +++ b/keyboards/unicomp/classic_ultracl_post_2013/overnumpad_1xb/config.h @@ -63,8 +63,10 @@ #define STM32_HSECLK 16000000 #define SOLENOID_PIN B5 +#define HAPTIC_ENABLE_PIN C13 #define SOLENOID_DEFAULT_DWELL 4 #define SOLENOID_MIN_DWELL 4 +#define HAPTIC_OFF_IN_LOW_POWER 1 #define NO_HAPTIC_MOD #define LED_NUM_LOCK_PIN C12 diff --git a/keyboards/unicomp/classic_ultracl_post_2013/overnumpad_1xb/overnumpad_1xb.c b/keyboards/unicomp/classic_ultracl_post_2013/overnumpad_1xb/overnumpad_1xb.c index c4229ef997..cb5ec3dc12 100644 --- a/keyboards/unicomp/classic_ultracl_post_2013/overnumpad_1xb/overnumpad_1xb.c +++ b/keyboards/unicomp/classic_ultracl_post_2013/overnumpad_1xb/overnumpad_1xb.c @@ -18,10 +18,6 @@ void keyboard_post_init_kb(void) { - // Solenoid enable: - setPinOutput(C13); - writePin(C13, 1); - //debug_enable=true; //debug_matrix=true; } diff --git a/keyboards/unicomp/classic_ultracl_pre_2013/overnumpad_1xb/config.h b/keyboards/unicomp/classic_ultracl_pre_2013/overnumpad_1xb/config.h index fb9a872299..feb2e32d57 100644 --- a/keyboards/unicomp/classic_ultracl_pre_2013/overnumpad_1xb/config.h +++ b/keyboards/unicomp/classic_ultracl_pre_2013/overnumpad_1xb/config.h @@ -63,8 +63,10 @@ #define STM32_HSECLK 16000000 #define SOLENOID_PIN B5 +#define HAPTIC_ENABLE_PIN C13 #define SOLENOID_DEFAULT_DWELL 4 #define SOLENOID_MIN_DWELL 4 +#define HAPTIC_OFF_IN_LOW_POWER 1 #define NO_HAPTIC_MOD #define LED_NUM_LOCK_PIN C12 diff --git a/keyboards/unicomp/classic_ultracl_pre_2013/overnumpad_1xb/overnumpad_1xb.c b/keyboards/unicomp/classic_ultracl_pre_2013/overnumpad_1xb/overnumpad_1xb.c index c4229ef997..cb5ec3dc12 100644 --- a/keyboards/unicomp/classic_ultracl_pre_2013/overnumpad_1xb/overnumpad_1xb.c +++ b/keyboards/unicomp/classic_ultracl_pre_2013/overnumpad_1xb/overnumpad_1xb.c @@ -18,10 +18,6 @@ void keyboard_post_init_kb(void) { - // Solenoid enable: - setPinOutput(C13); - writePin(C13, 1); - //debug_enable=true; //debug_matrix=true; } diff --git a/keyboards/unicomp/spacesaver_m_post_2013/overnumpad_1xb/config.h b/keyboards/unicomp/spacesaver_m_post_2013/overnumpad_1xb/config.h index bfb1a9cf68..597d287b07 100644 --- a/keyboards/unicomp/spacesaver_m_post_2013/overnumpad_1xb/config.h +++ b/keyboards/unicomp/spacesaver_m_post_2013/overnumpad_1xb/config.h @@ -63,8 +63,10 @@ #define STM32_HSECLK 16000000 #define SOLENOID_PIN B5 +#define HAPTIC_ENABLE_PIN C13 #define SOLENOID_DEFAULT_DWELL 4 #define SOLENOID_MIN_DWELL 4 +#define HAPTIC_OFF_IN_LOW_POWER 1 #define NO_HAPTIC_MOD #define LED_CAPS_LOCK_PIN C12 diff --git a/keyboards/unicomp/spacesaver_m_post_2013/overnumpad_1xb/overnumpad_1xb.c b/keyboards/unicomp/spacesaver_m_post_2013/overnumpad_1xb/overnumpad_1xb.c index 41f51b7575..eda367804d 100644 --- a/keyboards/unicomp/spacesaver_m_post_2013/overnumpad_1xb/overnumpad_1xb.c +++ b/keyboards/unicomp/spacesaver_m_post_2013/overnumpad_1xb/overnumpad_1xb.c @@ -23,9 +23,6 @@ void keyboard_post_init_kb(void) setPinOutput(C11); // middle led, always off on Spacesaver M writePin(C11, 0); setPinOutput(C10); // right-most led, normally Scroll Lock, but on Spacesaver M indicates function layer - // Solenoid enable: - setPinOutput(C13); - writePin(C13, 1); //debug_enable=true; //debug_matrix=true; diff --git a/keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/config.h b/keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/config.h index f3ce89431e..7bd5b224df 100644 --- a/keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/config.h +++ b/keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/config.h @@ -64,8 +64,10 @@ #define STM32_HSECLK 16000000 #define SOLENOID_PIN B5 +#define HAPTIC_ENABLE_PIN C13 #define SOLENOID_DEFAULT_DWELL 4 #define SOLENOID_MIN_DWELL 4 +#define HAPTIC_OFF_IN_LOW_POWER 1 #define NO_HAPTIC_MOD #define LED_CAPS_LOCK_PIN C12 diff --git a/keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/overnumpad_1xb.c b/keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/overnumpad_1xb.c index 5d91eae20e..b7e3fd9632 100644 --- a/keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/overnumpad_1xb.c +++ b/keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/overnumpad_1xb.c @@ -23,9 +23,6 @@ void keyboard_post_init_kb(void) setPinOutput(C11); // middle led, always off on Spacesaver M writePin(C11, 0); setPinOutput(C10); // right-most led, normally Scroll Lock, but on Spacesaver M indicates function layer - // Solenoid enable: - setPinOutput(C13); - writePin(C13, 1); //debug_enable=true; //debug_matrix=true; From 699e69bec52f30cd078ae354cc6b2ca1fd04323f Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Tue, 2 Nov 2021 21:05:42 +1100 Subject: [PATCH 402/595] Fixup LED matrix. (#15020) --- quantum/led_matrix/led_matrix.h | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/quantum/led_matrix/led_matrix.h b/quantum/led_matrix/led_matrix.h index f540be44ca..5386744430 100644 --- a/quantum/led_matrix/led_matrix.h +++ b/quantum/led_matrix/led_matrix.h @@ -39,13 +39,13 @@ #if defined(LED_MATRIX_LED_PROCESS_LIMIT) && LED_MATRIX_LED_PROCESS_LIMIT > 0 && LED_MATRIX_LED_PROCESS_LIMIT < DRIVER_LED_TOTAL # if defined(LED_MATRIX_SPLIT) -# define LED_MATRIX_USE_LIMITS(min, max) -uint8_t min = LED_MATRIX_LED_PROCESS_LIMIT * params->iter; -uint8_t max = min + LED_MATRIX_LED_PROCESS_LIMIT; -if (max > DRIVER_LED_TOTAL) max = DRIVER_LED_TOTAL; -uint8_t k_led_matrix_split[2] = LED_MATRIX_SPLIT; -if (is_keyboard_left() && (max > k_led_matrix_split[0])) max = k_led_matrix_split[0]; -if (!(is_keyboard_left()) && (min < k_led_matrix_split[0])) min = k_led_matrix_split[0]; +# define LED_MATRIX_USE_LIMITS(min, max) \ + uint8_t min = LED_MATRIX_LED_PROCESS_LIMIT * params->iter; \ + uint8_t max = min + LED_MATRIX_LED_PROCESS_LIMIT; \ + if (max > DRIVER_LED_TOTAL) max = DRIVER_LED_TOTAL; \ + uint8_t k_led_matrix_split[2] = LED_MATRIX_SPLIT; \ + if (is_keyboard_left() && (max > k_led_matrix_split[0])) max = k_led_matrix_split[0]; \ + if (!(is_keyboard_left()) && (min < k_led_matrix_split[0])) min = k_led_matrix_split[0]; # else # define LED_MATRIX_USE_LIMITS(min, max) \ uint8_t min = LED_MATRIX_LED_PROCESS_LIMIT * params->iter; \ From 0ecd4926b20b3a3240dcb29f5184853c1ec192b8 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Tue, 2 Nov 2021 21:18:33 +1100 Subject: [PATCH 403/595] Fix build failures caused by #12947. (#15019) * Fix build failures caused by #12947. Unknown if this actually works. * qmk format-c --- tmk_core/common/chibios/eeprom_teensy.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/tmk_core/common/chibios/eeprom_teensy.c b/tmk_core/common/chibios/eeprom_teensy.c index 2493c607d8..97da6f9e14 100644 --- a/tmk_core/common/chibios/eeprom_teensy.c +++ b/tmk_core/common/chibios/eeprom_teensy.c @@ -44,7 +44,7 @@ #define F_CPU KINETIS_SYSCLK_FREQUENCY -static int kinetis_hsrun_disable(void) { +static inline int kinetis_hsrun_disable(void) { #if defined(MK66F18) if (SMC->PMSTAT == SMC_PMSTAT_HSRUN) { // First, reduce the CPU clock speed, but do not change @@ -102,7 +102,7 @@ static int kinetis_hsrun_disable(void) { return 0; } -static int kinetis_hsrun_enable(void) { +static inline int kinetis_hsrun_enable(void) { #if defined(MK66F18) if (SMC->PMSTAT == SMC_PMSTAT_RUN) { // Turn HSRUN mode on @@ -234,7 +234,7 @@ void eeprom_initialize(void) { // FlexRAM is configured as traditional RAM // We need to reconfigure for EEPROM usage kinetis_hsrun_disable(); - FTFL->FCCOB0 = FTFE_FCCOB0_CCOBn_SET(0x80); // PGMPART = Program Partition Command + FTFL->FCCOB0 = 0x80; // PGMPART = Program Partition Command FTFL->FCCOB3 = 0; FTFL->FCCOB4 = EEESPLIT | EEESIZE; FTFL->FCCOB5 = EEPARTITION; From 634e42b2b47d32ae8aa933599e63e3761939e3f5 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Tue, 2 Nov 2021 18:53:46 +0000 Subject: [PATCH 404/595] Revert to old init order for host driver (#15029) * Partially revert 14888 --- quantum/main.c | 15 ++++++++++++--- tmk_core/protocol/chibios/chibios.c | 6 +++--- tmk_core/protocol/lufa/lufa.c | 6 +++--- tmk_core/protocol/vusb/protocol.c | 5 +++-- 4 files changed, 21 insertions(+), 11 deletions(-) diff --git a/quantum/main.c b/quantum/main.c index a896a67c66..3814d371c1 100644 --- a/quantum/main.c +++ b/quantum/main.c @@ -19,11 +19,21 @@ void platform_setup(void); void protocol_setup(void); -void protocol_init(void); +void protocol_pre_init(void); +void protocol_post_init(void); void protocol_pre_task(void); void protocol_post_task(void); -// Bodge as refactoring vusb sucks.... +// Bodge as refactoring this area sucks.... +void protocol_init(void) __attribute__((weak)); +void protocol_init(void) { + protocol_pre_init(); + + keyboard_init(); + + protocol_post_init(); +} + void protocol_task(void) __attribute__((weak)); void protocol_task(void) { protocol_pre_task(); @@ -44,7 +54,6 @@ int main(void) { keyboard_setup(); protocol_init(); - keyboard_init(); /* Main loop */ while (true) { diff --git a/tmk_core/protocol/chibios/chibios.c b/tmk_core/protocol/chibios/chibios.c index 98b3305089..5ba21b3f8e 100644 --- a/tmk_core/protocol/chibios/chibios.c +++ b/tmk_core/protocol/chibios/chibios.c @@ -140,7 +140,7 @@ void protocol_setup(void) { // chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); } -void protocol_init(void) { +void protocol_pre_init(void) { /* Init USB */ usb_event_queue_init(); init_usb_driver(&USB_DRIVER); @@ -173,10 +173,10 @@ void protocol_init(void) { wait_ms(50); print("USB configured.\n"); - - host_set_driver(driver); } +void protocol_post_init(void) { host_set_driver(driver); } + void protocol_pre_task(void) { usb_event_queue_task(); diff --git a/tmk_core/protocol/lufa/lufa.c b/tmk_core/protocol/lufa/lufa.c index 80781d2f37..e3be96d93d 100644 --- a/tmk_core/protocol/lufa/lufa.c +++ b/tmk_core/protocol/lufa/lufa.c @@ -1072,7 +1072,7 @@ void protocol_setup(void) { usb_device_state_init(); } -void protocol_init(void) { +void protocol_pre_init(void) { setup_usb(); sei(); @@ -1094,10 +1094,10 @@ void protocol_init(void) { #else USB_USBTask(); #endif - - host_set_driver(&lufa_driver); } +void protocol_post_init(void) { host_set_driver(&lufa_driver); } + void protocol_pre_task(void) { #if !defined(NO_USB_STARTUP_CHECK) if (USB_DeviceState == DEVICE_STATE_Suspended) { diff --git a/tmk_core/protocol/vusb/protocol.c b/tmk_core/protocol/vusb/protocol.c index 947c3383f1..644e77e021 100644 --- a/tmk_core/protocol/vusb/protocol.c +++ b/tmk_core/protocol/vusb/protocol.c @@ -113,12 +113,13 @@ void protocol_setup(void) { #endif } -void protocol_init(void) { +void protocol_pre_init(void) { setup_usb(); sei(); +} +void protocol_post_init(void) { host_set_driver(vusb_driver()); - wait_ms(50); } From 387edab52b1c1ab7585c4c1a11d997a6a90a505c Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Wed, 3 Nov 2021 06:54:16 +1100 Subject: [PATCH 405/595] Fixup #15029 (#15031) --- tmk_core/protocol/chibios/chibios.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tmk_core/protocol/chibios/chibios.c b/tmk_core/protocol/chibios/chibios.c index 5ba21b3f8e..41752b2130 100644 --- a/tmk_core/protocol/chibios/chibios.c +++ b/tmk_core/protocol/chibios/chibios.c @@ -140,6 +140,8 @@ void protocol_setup(void) { // chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL); } +static host_driver_t *driver = NULL; + void protocol_pre_init(void) { /* Init USB */ usb_event_queue_init(); @@ -149,8 +151,6 @@ void protocol_pre_init(void) { setup_midi(); #endif - host_driver_t *driver = NULL; - /* Wait until USB is active */ while (true) { #if defined(WAIT_FOR_USB) From 5da04fb45b0d5cddc6f49f88ea9c6a4037ef82ce Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Wed, 3 Nov 2021 08:26:40 +1100 Subject: [PATCH 406/595] Update to ChibiOS 20.3.4, support builds against trunk (#14208) * Add support for building against ChibiOS svn/trunk. * Swap to 21.6.x * Update to latest branch revision as released version is broken. * Updated configs. * Conf updates. * Updated ChibiOS * Convert STM32L422 to actual L422 ChibiOS platform. * Downgrade to 20.3.4 as ChibiOS 21.6.x is being aborted. * Rollback L422-based boards. --- docs/chibios_upgrade_instructions.md | 23 ++-- keyboards/matrix/m20add/mcuconf.h | 65 ++++++----- keyboards/matrix/noah/mcuconf.h | 65 ++++++----- lib/chibios | 2 +- .../BLACKPILL_STM32_F401/configs/mcuconf.h | 71 +++++------- .../BLACKPILL_STM32_F411/configs/mcuconf.h | 65 ++++++----- .../GENERIC_STM32_F405XG/configs/mcuconf.h | 3 - .../GENERIC_STM32_F407XE/configs/mcuconf.h | 3 - .../GENERIC_STM32_F446XE/configs/mcuconf.h | 108 ++++++++++-------- .../GENERIC_STM32_G431XB/configs/mcuconf.h | 15 +++ .../GENERIC_STM32_G474XE/configs/mcuconf.h | 15 +++ .../boards/QMK_PROTON_C/configs/chconf.h | 2 +- .../chibios/boards/common/configs/chconf.h | 2 +- tmk_core/chibios.mk | 24 +++- tmk_core/protocol/chibios/usb_main.c | 12 +- util/chibios_conf_updater.sh | 101 ++-------------- util/update_chibios_mirror.sh | 4 +- 17 files changed, 276 insertions(+), 304 deletions(-) diff --git a/docs/chibios_upgrade_instructions.md b/docs/chibios_upgrade_instructions.md index 40c2faafcf..b0a71142a3 100644 --- a/docs/chibios_upgrade_instructions.md +++ b/docs/chibios_upgrade_instructions.md @@ -14,10 +14,10 @@ ChibiOS and ChibiOS-Contrib need to be updated in tandem -- the latter has a bra * First time around this will take several hours * Subsequent updates will be incremental only * Tagging example (work out which version first!): - * `git tag -a ver20.3.3 -m ver20.3.3 svn/tags/ver20.3.3` - * `git push qmk ver20.3.3` - * `git tag -a breaking_YYYY_qN -m breaking_YYYY_qN svn/tags/ver20.3.3` - * `git push qmk breaking_YYYY_qN` + * `git tag -a ver20.3.4 -m ver20.3.4 svn/tags/ver20.3.4` + * `git push qmk ver20.3.4` + * `git tag -a develop_YYYY_qN -m develop_YYYY_qN svn/tags/ver20.3.4` + * `git push qmk develop_YYYY_qN` ## Getting ChibiOS-Contrib @@ -30,8 +30,8 @@ ChibiOS and ChibiOS-Contrib need to be updated in tandem -- the latter has a bra * `git checkout chibios-20.3.x` * `git pull --ff-only` * `git push origin chibios-20.3.x` - * `git tag -a breaking_YYYY_qN -m breaking_YYYY_qN chibios-20.3.x` - * `git push origin breaking_YYYY_qN` + * `git tag -a develop_YYYY_qN -m develop_YYYY_qN chibios-20.3.x` + * `git push origin develop_YYYY_qN` ## Updating submodules @@ -42,15 +42,18 @@ ChibiOS and ChibiOS-Contrib need to be updated in tandem -- the latter has a bra * `git checkout -b chibios-version-bump` * `cd lib/chibios` * `git fetch --all --tags --prune` - * `git checkout breaking_YYYY_qN` + * `git checkout develop_YYYY_qN` * `cd ../chibios-contrib` * `git fetch --all --tags --prune` - * `git checkout breaking_YYYY_qN` + * `git checkout develop_YYYY_qN` +* Update ChibiOS configs within QMK + * `cd $QMK_FIRMWARE` + * `./util/chibios_conf_updater.sh` * Build everything * `cd $QMK_FIRMWARE` * `qmk multibuild -j4` * Make sure there are no errors * Push to the repo - * `git commit -am 'Update ChibiOS to XXXXXXXXX'` + * `git commit -am 'Update ChibiOS to 99.9.9'` * `git push --set-upstream origin chibios-version-bump` -* Make a PR to qmk_firmware with the new branch \ No newline at end of file +* Make a PR to qmk_firmware with the new branch diff --git a/keyboards/matrix/m20add/mcuconf.h b/keyboards/matrix/m20add/mcuconf.h index 54a1f26613..00216f6908 100644 --- a/keyboards/matrix/m20add/mcuconf.h +++ b/keyboards/matrix/m20add/mcuconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -32,11 +32,15 @@ */ #define STM32F4xx_MCUCONF +#define STM32F411_MCUCONF /* * HAL driver system settings. */ #define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_BKPRAM_ENABLE FALSE #define STM32_HSI_ENABLED TRUE #define STM32_LSI_ENABLED TRUE #define STM32_HSE_ENABLED TRUE @@ -60,9 +64,6 @@ #define STM32_I2SSRC STM32_I2SSRC_CKIN #define STM32_PLLI2SN_VALUE 192 #define STM32_PLLI2SR_VALUE 5 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_BKPRAM_ENABLE FALSE /* * IRQ system settings. @@ -82,6 +83,19 @@ #define STM32_IRQ_EXTI21_PRIORITY 15 #define STM32_IRQ_EXTI22_PRIORITY 15 +#define STM32_IRQ_TIM1_BRK_TIM9_PRIORITY 7 +#define STM32_IRQ_TIM1_UP_TIM10_PRIORITY 7 +#define STM32_IRQ_TIM1_TRGCO_TIM11_PRIORITY 7 +#define STM32_IRQ_TIM1_CC_PRIORITY 7 +#define STM32_IRQ_TIM2_PRIORITY 7 +#define STM32_IRQ_TIM3_PRIORITY 7 +#define STM32_IRQ_TIM4_PRIORITY 7 +#define STM32_IRQ_TIM5_PRIORITY 7 + +#define STM32_IRQ_USART1_PRIORITY 12 +#define STM32_IRQ_USART2_PRIORITY 12 +#define STM32_IRQ_USART6_PRIORITY 12 + /* * ADC driver system settings. */ @@ -101,14 +115,8 @@ #define STM32_GPT_USE_TIM4 TRUE #define STM32_GPT_USE_TIM5 FALSE #define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM10 FALSE #define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 /* * I2C driver system settings. @@ -155,29 +163,28 @@ #define STM32_ICU_USE_TIM4 FALSE #define STM32_ICU_USE_TIM5 FALSE #define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 +#define STM32_ICU_USE_TIM10 FALSE +#define STM32_ICU_USE_TIM11 FALSE /* * PWM driver system settings. */ -#define STM32_PWM_USE_ADVANCED FALSE #define STM32_PWM_USE_TIM1 FALSE #define STM32_PWM_USE_TIM2 FALSE #define STM32_PWM_USE_TIM3 FALSE #define STM32_PWM_USE_TIM4 FALSE #define STM32_PWM_USE_TIM5 FALSE #define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 +#define STM32_PWM_USE_TIM10 FALSE +#define STM32_PWM_USE_TIM11 FALSE + +/* + * RTC driver system settings. + */ +#define STM32_RTC_PRESA_VALUE 32 +#define STM32_RTC_PRESS_VALUE 1024 +#define STM32_RTC_CR_INIT 0 +#define STM32_RTC_TAMPCR_INIT 0 /* * SERIAL driver system settings. @@ -185,9 +192,6 @@ #define STM32_SERIAL_USE_USART1 FALSE #define STM32_SERIAL_USE_USART2 FALSE #define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 /* * SPI driver system settings. @@ -227,9 +231,6 @@ #define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) #define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) #define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 #define STM32_UART_USART1_DMA_PRIORITY 0 #define STM32_UART_USART2_DMA_PRIORITY 0 #define STM32_UART_USART6_DMA_PRIORITY 0 @@ -241,9 +242,7 @@ #define STM32_USB_USE_OTG1 TRUE #define STM32_USB_OTG1_IRQ_PRIORITY 14 #define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 +#define STM32_USB_HOST_WAKEUP_DURATION 2 /* * WDG driver system settings. diff --git a/keyboards/matrix/noah/mcuconf.h b/keyboards/matrix/noah/mcuconf.h index 54a1f26613..00216f6908 100644 --- a/keyboards/matrix/noah/mcuconf.h +++ b/keyboards/matrix/noah/mcuconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -32,11 +32,15 @@ */ #define STM32F4xx_MCUCONF +#define STM32F411_MCUCONF /* * HAL driver system settings. */ #define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_BKPRAM_ENABLE FALSE #define STM32_HSI_ENABLED TRUE #define STM32_LSI_ENABLED TRUE #define STM32_HSE_ENABLED TRUE @@ -60,9 +64,6 @@ #define STM32_I2SSRC STM32_I2SSRC_CKIN #define STM32_PLLI2SN_VALUE 192 #define STM32_PLLI2SR_VALUE 5 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_BKPRAM_ENABLE FALSE /* * IRQ system settings. @@ -82,6 +83,19 @@ #define STM32_IRQ_EXTI21_PRIORITY 15 #define STM32_IRQ_EXTI22_PRIORITY 15 +#define STM32_IRQ_TIM1_BRK_TIM9_PRIORITY 7 +#define STM32_IRQ_TIM1_UP_TIM10_PRIORITY 7 +#define STM32_IRQ_TIM1_TRGCO_TIM11_PRIORITY 7 +#define STM32_IRQ_TIM1_CC_PRIORITY 7 +#define STM32_IRQ_TIM2_PRIORITY 7 +#define STM32_IRQ_TIM3_PRIORITY 7 +#define STM32_IRQ_TIM4_PRIORITY 7 +#define STM32_IRQ_TIM5_PRIORITY 7 + +#define STM32_IRQ_USART1_PRIORITY 12 +#define STM32_IRQ_USART2_PRIORITY 12 +#define STM32_IRQ_USART6_PRIORITY 12 + /* * ADC driver system settings. */ @@ -101,14 +115,8 @@ #define STM32_GPT_USE_TIM4 TRUE #define STM32_GPT_USE_TIM5 FALSE #define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM10 FALSE #define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 /* * I2C driver system settings. @@ -155,29 +163,28 @@ #define STM32_ICU_USE_TIM4 FALSE #define STM32_ICU_USE_TIM5 FALSE #define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 +#define STM32_ICU_USE_TIM10 FALSE +#define STM32_ICU_USE_TIM11 FALSE /* * PWM driver system settings. */ -#define STM32_PWM_USE_ADVANCED FALSE #define STM32_PWM_USE_TIM1 FALSE #define STM32_PWM_USE_TIM2 FALSE #define STM32_PWM_USE_TIM3 FALSE #define STM32_PWM_USE_TIM4 FALSE #define STM32_PWM_USE_TIM5 FALSE #define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 +#define STM32_PWM_USE_TIM10 FALSE +#define STM32_PWM_USE_TIM11 FALSE + +/* + * RTC driver system settings. + */ +#define STM32_RTC_PRESA_VALUE 32 +#define STM32_RTC_PRESS_VALUE 1024 +#define STM32_RTC_CR_INIT 0 +#define STM32_RTC_TAMPCR_INIT 0 /* * SERIAL driver system settings. @@ -185,9 +192,6 @@ #define STM32_SERIAL_USE_USART1 FALSE #define STM32_SERIAL_USE_USART2 FALSE #define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 /* * SPI driver system settings. @@ -227,9 +231,6 @@ #define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) #define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) #define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 #define STM32_UART_USART1_DMA_PRIORITY 0 #define STM32_UART_USART2_DMA_PRIORITY 0 #define STM32_UART_USART6_DMA_PRIORITY 0 @@ -241,9 +242,7 @@ #define STM32_USB_USE_OTG1 TRUE #define STM32_USB_OTG1_IRQ_PRIORITY 14 #define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 +#define STM32_USB_HOST_WAKEUP_DURATION 2 /* * WDG driver system settings. diff --git a/lib/chibios b/lib/chibios index 413e39c568..d7b9d1c87f 160000 --- a/lib/chibios +++ b/lib/chibios @@ -1 +1 @@ -Subproject commit 413e39c5681d181720440f2a8b7391f581788d7b +Subproject commit d7b9d1c87f724bd7c8cd1486d6d0dc3ba52e0d52 diff --git a/platforms/chibios/boards/BLACKPILL_STM32_F401/configs/mcuconf.h b/platforms/chibios/boards/BLACKPILL_STM32_F401/configs/mcuconf.h index ba6e934fe7..a21fd7bd12 100644 --- a/platforms/chibios/boards/BLACKPILL_STM32_F401/configs/mcuconf.h +++ b/platforms/chibios/boards/BLACKPILL_STM32_F401/configs/mcuconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -32,11 +32,15 @@ */ #define STM32F4xx_MCUCONF +#define STM32F401_MCUCONF /* * HAL driver system settings. */ #define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_BKPRAM_ENABLE FALSE #define STM32_HSI_ENABLED TRUE #define STM32_LSI_ENABLED TRUE #define STM32_HSE_ENABLED TRUE @@ -44,13 +48,13 @@ #define STM32_CLOCK48_REQUIRED TRUE #define STM32_SW STM32_SW_PLL #define STM32_PLLSRC STM32_PLLSRC_HSE -#define STM32_PLLM_VALUE 25 -#define STM32_PLLN_VALUE 336 -#define STM32_PLLP_VALUE 4 -#define STM32_PLLQ_VALUE 7 -#define STM32_HPRE STM32_HPRE_DIV1 -#define STM32_PPRE1 STM32_PPRE1_DIV4 -#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_PLLM_VALUE 25 +#define STM32_PLLN_VALUE 336 +#define STM32_PLLP_VALUE 4 +#define STM32_PLLQ_VALUE 7 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV4 +#define STM32_PPRE2 STM32_PPRE2_DIV2 #define STM32_RTCSEL STM32_RTCSEL_LSI #define STM32_RTCPRE_VALUE 8 #define STM32_MCO1SEL STM32_MCO1SEL_HSI @@ -60,9 +64,6 @@ #define STM32_I2SSRC STM32_I2SSRC_CKIN #define STM32_PLLI2SN_VALUE 192 #define STM32_PLLI2SR_VALUE 5 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_BKPRAM_ENABLE FALSE /* * IRQ system settings. @@ -82,6 +83,19 @@ #define STM32_IRQ_EXTI21_PRIORITY 15 #define STM32_IRQ_EXTI22_PRIORITY 15 +#define STM32_IRQ_TIM1_BRK_TIM9_PRIORITY 7 +#define STM32_IRQ_TIM1_UP_TIM10_PRIORITY 7 +#define STM32_IRQ_TIM1_TRGCO_TIM11_PRIORITY 7 +#define STM32_IRQ_TIM1_CC_PRIORITY 7 +#define STM32_IRQ_TIM2_PRIORITY 7 +#define STM32_IRQ_TIM3_PRIORITY 7 +#define STM32_IRQ_TIM4_PRIORITY 7 +#define STM32_IRQ_TIM5_PRIORITY 7 + +#define STM32_IRQ_USART1_PRIORITY 12 +#define STM32_IRQ_USART2_PRIORITY 12 +#define STM32_IRQ_USART6_PRIORITY 12 + /* * ADC driver system settings. */ @@ -101,14 +115,8 @@ #define STM32_GPT_USE_TIM4 FALSE #define STM32_GPT_USE_TIM5 FALSE #define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM10 FALSE #define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 /* * I2C driver system settings. @@ -155,29 +163,20 @@ #define STM32_ICU_USE_TIM4 FALSE #define STM32_ICU_USE_TIM5 FALSE #define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 +#define STM32_ICU_USE_TIM10 FALSE +#define STM32_ICU_USE_TIM11 FALSE /* * PWM driver system settings. */ -#define STM32_PWM_USE_ADVANCED FALSE #define STM32_PWM_USE_TIM1 FALSE #define STM32_PWM_USE_TIM2 FALSE #define STM32_PWM_USE_TIM3 FALSE #define STM32_PWM_USE_TIM4 FALSE #define STM32_PWM_USE_TIM5 FALSE #define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 +#define STM32_PWM_USE_TIM10 FALSE +#define STM32_PWM_USE_TIM11 FALSE /* * SERIAL driver system settings. @@ -185,9 +184,6 @@ #define STM32_SERIAL_USE_USART1 FALSE #define STM32_SERIAL_USE_USART2 FALSE #define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 /* * SPI driver system settings. @@ -227,9 +223,6 @@ #define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) #define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) #define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 #define STM32_UART_USART1_DMA_PRIORITY 0 #define STM32_UART_USART2_DMA_PRIORITY 0 #define STM32_UART_USART6_DMA_PRIORITY 0 @@ -241,9 +234,7 @@ #define STM32_USB_USE_OTG1 TRUE #define STM32_USB_OTG1_IRQ_PRIORITY 14 #define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG_THREAD_PRIO NORMALPRIO+1 -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 +#define STM32_USB_HOST_WAKEUP_DURATION 2 /* * WDG driver system settings. diff --git a/platforms/chibios/boards/BLACKPILL_STM32_F411/configs/mcuconf.h b/platforms/chibios/boards/BLACKPILL_STM32_F411/configs/mcuconf.h index 0394ff56bb..131c847661 100644 --- a/platforms/chibios/boards/BLACKPILL_STM32_F411/configs/mcuconf.h +++ b/platforms/chibios/boards/BLACKPILL_STM32_F411/configs/mcuconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -32,11 +32,15 @@ */ #define STM32F4xx_MCUCONF +#define STM32F411_MCUCONF /* * HAL driver system settings. */ #define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_BKPRAM_ENABLE FALSE #define STM32_HSI_ENABLED TRUE #define STM32_LSI_ENABLED TRUE #define STM32_HSE_ENABLED TRUE @@ -60,9 +64,6 @@ #define STM32_I2SSRC STM32_I2SSRC_CKIN #define STM32_PLLI2SN_VALUE 192 #define STM32_PLLI2SR_VALUE 5 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_BKPRAM_ENABLE FALSE /* * IRQ system settings. @@ -82,6 +83,19 @@ #define STM32_IRQ_EXTI21_PRIORITY 15 #define STM32_IRQ_EXTI22_PRIORITY 15 +#define STM32_IRQ_TIM1_BRK_TIM9_PRIORITY 7 +#define STM32_IRQ_TIM1_UP_TIM10_PRIORITY 7 +#define STM32_IRQ_TIM1_TRGCO_TIM11_PRIORITY 7 +#define STM32_IRQ_TIM1_CC_PRIORITY 7 +#define STM32_IRQ_TIM2_PRIORITY 7 +#define STM32_IRQ_TIM3_PRIORITY 7 +#define STM32_IRQ_TIM4_PRIORITY 7 +#define STM32_IRQ_TIM5_PRIORITY 7 + +#define STM32_IRQ_USART1_PRIORITY 12 +#define STM32_IRQ_USART2_PRIORITY 12 +#define STM32_IRQ_USART6_PRIORITY 12 + /* * ADC driver system settings. */ @@ -101,14 +115,8 @@ #define STM32_GPT_USE_TIM4 FALSE #define STM32_GPT_USE_TIM5 FALSE #define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM10 FALSE #define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 /* * I2C driver system settings. @@ -155,29 +163,28 @@ #define STM32_ICU_USE_TIM4 FALSE #define STM32_ICU_USE_TIM5 FALSE #define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 +#define STM32_ICU_USE_TIM10 FALSE +#define STM32_ICU_USE_TIM11 FALSE /* * PWM driver system settings. */ -#define STM32_PWM_USE_ADVANCED FALSE #define STM32_PWM_USE_TIM1 FALSE #define STM32_PWM_USE_TIM2 FALSE #define STM32_PWM_USE_TIM3 FALSE #define STM32_PWM_USE_TIM4 FALSE #define STM32_PWM_USE_TIM5 FALSE #define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 +#define STM32_PWM_USE_TIM10 FALSE +#define STM32_PWM_USE_TIM11 FALSE + +/* + * RTC driver system settings. + */ +#define STM32_RTC_PRESA_VALUE 32 +#define STM32_RTC_PRESS_VALUE 1024 +#define STM32_RTC_CR_INIT 0 +#define STM32_RTC_TAMPCR_INIT 0 /* * SERIAL driver system settings. @@ -185,9 +192,6 @@ #define STM32_SERIAL_USE_USART1 FALSE #define STM32_SERIAL_USE_USART2 FALSE #define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 /* * SPI driver system settings. @@ -227,9 +231,6 @@ #define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) #define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) #define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 #define STM32_UART_USART1_DMA_PRIORITY 0 #define STM32_UART_USART2_DMA_PRIORITY 0 #define STM32_UART_USART6_DMA_PRIORITY 0 @@ -241,9 +242,7 @@ #define STM32_USB_USE_OTG1 TRUE #define STM32_USB_OTG1_IRQ_PRIORITY 14 #define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG_THREAD_PRIO NORMALPRIO+1 -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 +#define STM32_USB_HOST_WAKEUP_DURATION 2 /* * WDG driver system settings. diff --git a/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/mcuconf.h index d2ec632d9f..908a580a91 100644 --- a/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/mcuconf.h +++ b/platforms/chibios/boards/GENERIC_STM32_F405XG/configs/mcuconf.h @@ -344,9 +344,6 @@ #define STM32_USB_OTG2_RX_FIFO_SIZE 1024 #define STM32_USB_HOST_WAKEUP_DURATION 2 -#define STM32_USB_OTG_THREAD_PRIO NORMALPRIO+1 -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 - /* * WDG driver system settings. */ diff --git a/platforms/chibios/boards/GENERIC_STM32_F407XE/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_F407XE/configs/mcuconf.h index 4be47fe1b0..928ee56c71 100644 --- a/platforms/chibios/boards/GENERIC_STM32_F407XE/configs/mcuconf.h +++ b/platforms/chibios/boards/GENERIC_STM32_F407XE/configs/mcuconf.h @@ -344,9 +344,6 @@ #define STM32_USB_OTG2_RX_FIFO_SIZE 1024 #define STM32_USB_HOST_WAKEUP_DURATION 2 -#define STM32_USB_OTG_THREAD_PRIO NORMALPRIO+1 -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 - /* * WDG driver system settings. */ diff --git a/platforms/chibios/boards/GENERIC_STM32_F446XE/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_F446XE/configs/mcuconf.h index d2de75590e..566c146c25 100644 --- a/platforms/chibios/boards/GENERIC_STM32_F446XE/configs/mcuconf.h +++ b/platforms/chibios/boards/GENERIC_STM32_F446XE/configs/mcuconf.h @@ -1,5 +1,5 @@ /* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + ChibiOS - Copyright (C) 2006..2020 Giovanni Di Sirio Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -32,11 +32,15 @@ */ #define STM32F4xx_MCUCONF +#define STM32F446_MCUCONF /* * HAL driver system settings. */ #define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_BKPRAM_ENABLE FALSE #define STM32_HSI_ENABLED FALSE #define STM32_LSI_ENABLED TRUE #define STM32_HSE_ENABLED TRUE @@ -70,9 +74,6 @@ #define STM32_SAI1SEL STM32_SAI2SEL_PLLR #define STM32_SAI2SEL STM32_SAI2SEL_PLLR #define STM32_CK48MSEL STM32_CK48MSEL_PLLALT -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_BKPRAM_ENABLE FALSE /* * IRQ system settings. @@ -92,6 +93,30 @@ #define STM32_IRQ_EXTI21_PRIORITY 15 #define STM32_IRQ_EXTI22_PRIORITY 15 +#define STM32_IRQ_TIM1_BRK_TIM9_PRIORITY 7 +#define STM32_IRQ_TIM1_UP_TIM10_PRIORITY 7 +#define STM32_IRQ_TIM1_TRGCO_TIM11_PRIORITY 7 +#define STM32_IRQ_TIM1_CC_PRIORITY 7 +#define STM32_IRQ_TIM2_PRIORITY 7 +#define STM32_IRQ_TIM3_PRIORITY 7 +#define STM32_IRQ_TIM4_PRIORITY 7 +#define STM32_IRQ_TIM5_PRIORITY 7 +#define STM32_IRQ_TIM6_PRIORITY 7 +#define STM32_IRQ_TIM7_PRIORITY 7 +#define STM32_IRQ_TIM8_BRK_TIM12_PRIORITY 7 +#define STM32_IRQ_TIM8_UP_TIM13_PRIORITY 7 +#define STM32_IRQ_TIM8_TRGCO_TIM14_PRIORITY 7 +#define STM32_IRQ_TIM8_CC_PRIORITY 7 + +#define STM32_IRQ_USART1_PRIORITY 12 +#define STM32_IRQ_USART2_PRIORITY 12 +#define STM32_IRQ_USART3_PRIORITY 12 +#define STM32_IRQ_UART4_PRIORITY 12 +#define STM32_IRQ_UART5_PRIORITY 12 +#define STM32_IRQ_USART6_PRIORITY 12 +#define STM32_IRQ_UART7_PRIORITY 12 +#define STM32_IRQ_UART8_PRIORITY 12 + /* * ADC driver system settings. */ @@ -143,21 +168,11 @@ #define STM32_GPT_USE_TIM7 FALSE #define STM32_GPT_USE_TIM8 FALSE #define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM10 FALSE #define STM32_GPT_USE_TIM11 FALSE #define STM32_GPT_USE_TIM12 FALSE +#define STM32_GPT_USE_TIM13 FALSE #define STM32_GPT_USE_TIM14 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM6_IRQ_PRIORITY 7 -#define STM32_GPT_TIM7_IRQ_PRIORITY 7 -#define STM32_GPT_TIM8_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 -#define STM32_GPT_TIM12_IRQ_PRIORITY 7 -#define STM32_GPT_TIM14_IRQ_PRIORITY 7 /* * I2C driver system settings. @@ -205,13 +220,11 @@ #define STM32_ICU_USE_TIM5 FALSE #define STM32_ICU_USE_TIM8 FALSE #define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM8_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 +#define STM32_ICU_USE_TIM10 FALSE +#define STM32_ICU_USE_TIM11 FALSE +#define STM32_ICU_USE_TIM12 FALSE +#define STM32_ICU_USE_TIM13 FALSE +#define STM32_ICU_USE_TIM14 FALSE /* * MAC driver system settings. @@ -227,7 +240,6 @@ /* * PWM driver system settings. */ -#define STM32_PWM_USE_ADVANCED FALSE #define STM32_PWM_USE_TIM1 FALSE #define STM32_PWM_USE_TIM2 FALSE #define STM32_PWM_USE_TIM3 FALSE @@ -235,13 +247,19 @@ #define STM32_PWM_USE_TIM5 FALSE #define STM32_PWM_USE_TIM8 FALSE #define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM8_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 +#define STM32_PWM_USE_TIM10 FALSE +#define STM32_PWM_USE_TIM11 FALSE +#define STM32_PWM_USE_TIM12 FALSE +#define STM32_PWM_USE_TIM13 FALSE +#define STM32_PWM_USE_TIM14 FALSE + +/* + * RTC driver system settings. + */ +#define STM32_RTC_PRESA_VALUE 32 +#define STM32_RTC_PRESS_VALUE 1024 +#define STM32_RTC_CR_INIT 0 +#define STM32_RTC_TAMPCR_INIT 0 /* * SDC driver system settings. @@ -265,14 +283,6 @@ #define STM32_SERIAL_USE_USART6 FALSE #define STM32_SERIAL_USE_UART7 FALSE #define STM32_SERIAL_USE_UART8 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART3_PRIORITY 12 -#define STM32_SERIAL_UART4_PRIORITY 12 -#define STM32_SERIAL_UART5_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 -#define STM32_SERIAL_UART7_PRIORITY 12 -#define STM32_SERIAL_UART8_PRIORITY 12 /* * SPI driver system settings. @@ -281,6 +291,8 @@ #define STM32_SPI_USE_SPI2 FALSE #define STM32_SPI_USE_SPI3 FALSE #define STM32_SPI_USE_SPI4 FALSE +#define STM32_SPI_USE_SPI5 FALSE +#define STM32_SPI_USE_SPI6 FALSE #define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) #define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) #define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) @@ -289,14 +301,22 @@ #define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) #define STM32_SPI_SPI4_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) #define STM32_SPI_SPI4_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 1) +#define STM32_SPI_SPI5_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) +#define STM32_SPI_SPI5_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) +#define STM32_SPI_SPI6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 6) +#define STM32_SPI_SPI6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) #define STM32_SPI_SPI1_DMA_PRIORITY 1 #define STM32_SPI_SPI2_DMA_PRIORITY 1 #define STM32_SPI_SPI3_DMA_PRIORITY 1 #define STM32_SPI_SPI4_DMA_PRIORITY 1 +#define STM32_SPI_SPI5_DMA_PRIORITY 1 +#define STM32_SPI_SPI6_DMA_PRIORITY 1 #define STM32_SPI_SPI1_IRQ_PRIORITY 10 #define STM32_SPI_SPI2_IRQ_PRIORITY 10 #define STM32_SPI_SPI3_IRQ_PRIORITY 10 #define STM32_SPI_SPI4_IRQ_PRIORITY 10 +#define STM32_SPI_SPI5_IRQ_PRIORITY 10 +#define STM32_SPI_SPI6_IRQ_PRIORITY 10 #define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") /* @@ -326,12 +346,6 @@ #define STM32_UART_UART5_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) #define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) #define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART3_IRQ_PRIORITY 12 -#define STM32_UART_UART4_IRQ_PRIORITY 12 -#define STM32_UART_UART5_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 #define STM32_UART_USART1_DMA_PRIORITY 0 #define STM32_UART_USART2_DMA_PRIORITY 0 #define STM32_UART_USART3_DMA_PRIORITY 0 @@ -349,9 +363,7 @@ #define STM32_USB_OTG2_IRQ_PRIORITY 14 #define STM32_USB_OTG1_RX_FIFO_SIZE 512 #define STM32_USB_OTG2_RX_FIFO_SIZE 1024 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 +#define STM32_USB_HOST_WAKEUP_DURATION 2 /* * WDG driver system settings. diff --git a/platforms/chibios/boards/GENERIC_STM32_G431XB/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_G431XB/configs/mcuconf.h index 182d4885d7..d115028300 100644 --- a/platforms/chibios/boards/GENERIC_STM32_G431XB/configs/mcuconf.h +++ b/platforms/chibios/boards/GENERIC_STM32_G431XB/configs/mcuconf.h @@ -40,9 +40,24 @@ */ #define STM32_NO_INIT FALSE #define STM32_VOS STM32_VOS_RANGE1 +#define STM32_PWR_BOOST TRUE #define STM32_PWR_CR2 (PWR_CR2_PLS_LEV0) #define STM32_PWR_CR3 (PWR_CR3_EIWF) #define STM32_PWR_CR4 (0U) +#define STM32_PWR_PUCRA (0U) +#define STM32_PWR_PDCRA (0U) +#define STM32_PWR_PUCRB (0U) +#define STM32_PWR_PDCRB (0U) +#define STM32_PWR_PUCRC (0U) +#define STM32_PWR_PDCRC (0U) +#define STM32_PWR_PUCRD (0U) +#define STM32_PWR_PDCRD (0U) +#define STM32_PWR_PUCRE (0U) +#define STM32_PWR_PDCRE (0U) +#define STM32_PWR_PUCRF (0U) +#define STM32_PWR_PDCRF (0U) +#define STM32_PWR_PUCRG (0U) +#define STM32_PWR_PDCRG (0U) #define STM32_HSI16_ENABLED TRUE #define STM32_HSI48_ENABLED TRUE #define STM32_HSE_ENABLED FALSE diff --git a/platforms/chibios/boards/GENERIC_STM32_G474XE/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_STM32_G474XE/configs/mcuconf.h index 117e920e3b..5710e2cb45 100644 --- a/platforms/chibios/boards/GENERIC_STM32_G474XE/configs/mcuconf.h +++ b/platforms/chibios/boards/GENERIC_STM32_G474XE/configs/mcuconf.h @@ -42,9 +42,24 @@ */ #define STM32_NO_INIT FALSE #define STM32_VOS STM32_VOS_RANGE1 +#define STM32_PWR_BOOST TRUE #define STM32_PWR_CR2 (PWR_CR2_PLS_LEV0) #define STM32_PWR_CR3 (PWR_CR3_EIWF) #define STM32_PWR_CR4 (0U) +#define STM32_PWR_PUCRA (0U) +#define STM32_PWR_PDCRA (0U) +#define STM32_PWR_PUCRB (0U) +#define STM32_PWR_PDCRB (0U) +#define STM32_PWR_PUCRC (0U) +#define STM32_PWR_PDCRC (0U) +#define STM32_PWR_PUCRD (0U) +#define STM32_PWR_PDCRD (0U) +#define STM32_PWR_PUCRE (0U) +#define STM32_PWR_PDCRE (0U) +#define STM32_PWR_PUCRF (0U) +#define STM32_PWR_PDCRF (0U) +#define STM32_PWR_PUCRG (0U) +#define STM32_PWR_PDCRG (0U) #define STM32_HSI16_ENABLED TRUE #define STM32_HSI48_ENABLED TRUE #define STM32_HSE_ENABLED FALSE diff --git a/platforms/chibios/boards/QMK_PROTON_C/configs/chconf.h b/platforms/chibios/boards/QMK_PROTON_C/configs/chconf.h index a1cbf68086..f812332960 100644 --- a/platforms/chibios/boards/QMK_PROTON_C/configs/chconf.h +++ b/platforms/chibios/boards/QMK_PROTON_C/configs/chconf.h @@ -40,7 +40,7 @@ /** * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * @note Allowed values are 16, 32 or 64 bits. */ #if !defined(CH_CFG_ST_RESOLUTION) #define CH_CFG_ST_RESOLUTION 32 diff --git a/platforms/chibios/boards/common/configs/chconf.h b/platforms/chibios/boards/common/configs/chconf.h index 44327a82d7..18ad609ca1 100644 --- a/platforms/chibios/boards/common/configs/chconf.h +++ b/platforms/chibios/boards/common/configs/chconf.h @@ -40,7 +40,7 @@ /** * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. + * @note Allowed values are 16, 32 or 64 bits. */ #if !defined(CH_CFG_ST_RESOLUTION) #define CH_CFG_ST_RESOLUTION 32 diff --git a/tmk_core/chibios.mk b/tmk_core/chibios.mk index 957a259229..6b298732c2 100644 --- a/tmk_core/chibios.mk +++ b/tmk_core/chibios.mk @@ -42,6 +42,11 @@ ifeq ($(strip $(MCU)), risc-v) PLATFORM_MK = $(CHIBIOS_CONTRIB)/os/hal/ports/GD/GD32VF103/platform.mk else # ARM Support + CHIBIOS_PORT ?= + ifeq ("$(CHIBIOS_PORT)","") + CHIBIOS_PORT = ARMv$(ARMV)-M + endif + # Startup files. Try a few different locations, for compability with old versions and # for things hardware in the contrib repository STARTUP_MK = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/startup_$(MCU_STARTUP).mk @@ -52,15 +57,24 @@ else endif endif - # Compability with old version - PORT_V = $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v$(ARMV)m.mk + # Port files. Try a few different locations, for compability with old versions and + # for things hardware in the contrib repository + PORT_V = $(CHIBIOS)/os/common/ports/$(CHIBIOS_PORT)/compilers/GCC/mk/port.mk ifeq ("$(wildcard $(PORT_V))","") - PORT_V = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v$(ARMV)m.mk + PORT_V = $(CHIBIOS)/os/rt/ports/ARMCMx/compilers/GCC/mk/port_v$(ARMV)m.mk + ifeq ("$(wildcard $(PORT_V))","") + PORT_V = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v$(ARMV)m.mk + endif endif - RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC + # Rules location. Try a few different locations, for compability with old versions and + # for things hardware in the contrib repository + RULESPATH = $(CHIBIOS)/os/common/ports/$(CHIBIOS_PORT)/compilers/GCC ifeq ("$(wildcard $(RULESPATH)/rules.mk)","") - RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC + RULESPATH = $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC + ifeq ("$(wildcard $(RULESPATH)/rules.mk)","") + RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC + endif endif endif diff --git a/tmk_core/protocol/chibios/usb_main.c b/tmk_core/protocol/chibios/usb_main.c index 3b16a0ff7b..a7db3e3ab1 100644 --- a/tmk_core/protocol/chibios/usb_main.c +++ b/tmk_core/protocol/chibios/usb_main.c @@ -71,7 +71,12 @@ uint8_t keyboard_protocol __attribute__((aligned(2))) = 1; uint8_t keyboard_led_state = 0; volatile uint16_t keyboard_idle_count = 0; static virtual_timer_t keyboard_idle_timer; -static void keyboard_idle_timer_cb(void *arg); + +#if CH_KERNEL_MAJOR >= 7 +static void keyboard_idle_timer_cb(struct ch_virtual_timer *, void *arg); +#elif CH_KERNEL_MAJOR <= 6 +static void keyboard_idle_timer_cb(void *arg); +#endif report_keyboard_t keyboard_report_sent = {{0}}; #ifdef MOUSE_ENABLE @@ -774,7 +779,12 @@ void kbd_sof_cb(USBDriver *usbp) { (void)usbp; } /* Idle requests timer code * callback (called from ISR, unlocked state) */ +#if CH_KERNEL_MAJOR >= 7 +static void keyboard_idle_timer_cb(struct ch_virtual_timer *timer, void *arg) { + (void)timer; +#elif CH_KERNEL_MAJOR <= 6 static void keyboard_idle_timer_cb(void *arg) { +#endif USBDriver *usbp = (USBDriver *)arg; osalSysLockFromISR(); diff --git a/util/chibios_conf_updater.sh b/util/chibios_conf_updater.sh index d1640b6729..a5699ca3cb 100755 --- a/util/chibios_conf_updater.sh +++ b/util/chibios_conf_updater.sh @@ -3,6 +3,17 @@ set -eEuo pipefail umask 022 +##################### +# You will need to get an older JDK -- JDK 8 +# +# !!!!!!!! DO NOT INSTALL THIS IF YOU HAVE AN EXISTING JDK OR JRE INSTALLED !!!!!!!! +# +# For Debian 10-ish distro's: +# wget -qO - https://adoptopenjdk.jfrog.io/adoptopenjdk/api/gpg/key/public | sudo apt-key add - +# sudo add-apt-repository --yes https://adoptopenjdk.jfrog.io/adoptopenjdk/deb/ +# sudo apt-get update && sudo apt-get install adoptopenjdk-8-hotspot + + sinfo() { echo "$@" >&2 ; } shead() { sinfo "" ; sinfo "---------------------------------" ; sinfo "-- $@" ; sinfo "---------------------------------" ; } havecmd() { command command type "${1}" >/dev/null 2>&1 || return 1 ; } @@ -11,8 +22,6 @@ this_script="$(realpath "${BASH_SOURCE[0]}")" script_dir="$(realpath "$(dirname "$this_script")")" qmk_firmware_dir="$(realpath "$script_dir/../")" -declare -A file_hashes - export PATH="$PATH:$script_dir/fmpp/bin" build_fmpp() { @@ -45,67 +54,6 @@ find_chibi_files() { done } -revert_chibi_files() { - local search_path="$1" - shead "Reverting ChibiOS config/board files..." - for file in $(find_chibi_files "$search_path" -name chconf.h -or -name halconf.h -or -name mcuconf.h -or -name board.c -or -name board.h -or -name board.mk -or -name board.chcfg) ; do - pushd "$search_path" >/dev/null 2>&1 - local relpath=$(realpath --relative-to="$search_path" "$file") - git checkout upstream/develop -- "$relpath" || git checkout origin/develop -- "$relpath" || true - popd >/dev/null 2>&1 - done -} - -populate_file_hashes() { - local search_path="$1" - shead "Determining duplicate config/board files..." - for file in $(find_chibi_files "$search_path" -name chconf.h -or -name halconf.h -or -name mcuconf.h -or -name board.c -or -name board.h) ; do - local key="file_$(clang-format "$file" | sha1sum | cut -d' ' -f1)" - local relpath=$(realpath --relative-to="$search_path" "$file") - file_hashes[$key]="${file_hashes[$key]:-} $relpath" - done - for file in $(find_chibi_files "$search_path" -name board.mk -or -name board.chcfg) ; do - local key="file_$(cat "$file" | sha1sum | cut -d' ' -f1)" - local relpath=$(realpath --relative-to="$search_path" "$file") - file_hashes[$key]="${file_hashes[$key]:-} $relpath" - done -} - -determine_equivalent_files() { - local search_file="$1" - for K in "${!file_hashes[@]}"; do - for V in ${file_hashes[$K]}; do - if [[ "$V" == "$search_file" ]] ; then - for V in ${file_hashes[$K]}; do - echo "$V" - done - return 0 - fi - done - done - return 1 -} - -deploy_staged_files() { - shead "Deploying staged files..." - for file in $(find "$qmk_firmware_dir/util/chibios-upgrade-staging" -type f) ; do - local relpath=$(realpath --relative-to="$qmk_firmware_dir/util/chibios-upgrade-staging" "$file") - sinfo "Deploying staged file: $relpath" - for other in $(determine_equivalent_files "$relpath") ; do - sinfo " => $other" - cp "$qmk_firmware_dir/util/chibios-upgrade-staging/$relpath" "$qmk_firmware_dir/$other" - done - done -} - -swap_mcuconf_f3xx_f303() { - shead "Swapping STM32F3xx_MCUCONF -> STM32F303_MCUCONF..." - for file in $(find_chibi_files "$qmk_firmware_dir" -name mcuconf.h) ; do - sed -i 's#STM32F3xx_MCUCONF#STM32F303_MCUCONF#g' "$file" - dos2unix "$file" >/dev/null 2>&1 - done -} - upgrade_conf_files_generic() { local search_filename="$1" local update_script="$2" @@ -150,35 +98,8 @@ upgrade_mcuconf_files() { popd >/dev/null 2>&1 } -update_staged_files() { - shead "Updating staged files with ChibiOS upgraded versions..." - for file in $(find "$qmk_firmware_dir/util/chibios-upgrade-staging" -type f) ; do - local relpath=$(realpath --relative-to="$qmk_firmware_dir/util/chibios-upgrade-staging" "$file") - sinfo "Updating staged file: $relpath" - cp "$qmk_firmware_dir/$relpath" "$qmk_firmware_dir/util/chibios-upgrade-staging/$relpath" - done -} - havecmd fmpp || build_fmpp -revert_chibi_files "$qmk_firmware_dir" -populate_file_hashes "$qmk_firmware_dir" - -shead "Showing duplicate ChibiOS files..." -for K in "${!file_hashes[@]}"; do - sinfo ${K#file_}: - for V in ${file_hashes[$K]}; do - sinfo " $V" - done -done - -if [ "${1:-}" == "-r" ] ; then - exit 0 -fi - -swap_mcuconf_f3xx_f303 -deploy_staged_files upgrade_mcuconf_files upgrade_chconf_files upgrade_halconf_files -update_staged_files diff --git a/util/update_chibios_mirror.sh b/util/update_chibios_mirror.sh index 83aee22817..0bf648ebfd 100755 --- a/util/update_chibios_mirror.sh +++ b/util/update_chibios_mirror.sh @@ -7,10 +7,10 @@ chibios_branches="trunk stable_20.3.x stable_21.6.x" # The ChibiOS tags to mirror -chibios_tags="ver20.3.1 ver20.3.2 ver20.3.3 ver21.6.0" +chibios_tags="ver20.3.1 ver20.3.2 ver20.3.3 ver20.3.4 ver21.6.0" # The ChibiOS-Contrib branches to mirror -contrib_branches="chibios-20.3.x" +contrib_branches="chibios-20.3.x chibios-21.6.x" ################################ # Actions From b05f0bb23145f40b42876276b0824895dda960bf Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Tue, 2 Nov 2021 16:51:03 -0700 Subject: [PATCH 407/595] [Keyboard] Reduce compile size for melgeek mach80 (#15034) --- keyboards/melgeek/mach80/keymaps/via/rules.mk | 1 - keyboards/melgeek/mach80/rev1/rules.mk | 2 ++ 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/keyboards/melgeek/mach80/keymaps/via/rules.mk b/keyboards/melgeek/mach80/keymaps/via/rules.mk index 36b7ba9cbc..1e5b99807c 100755 --- a/keyboards/melgeek/mach80/keymaps/via/rules.mk +++ b/keyboards/melgeek/mach80/keymaps/via/rules.mk @@ -1,2 +1 @@ VIA_ENABLE = yes -LTO_ENABLE = yes diff --git a/keyboards/melgeek/mach80/rev1/rules.mk b/keyboards/melgeek/mach80/rev1/rules.mk index a4d7206493..d390b07400 100755 --- a/keyboards/melgeek/mach80/rev1/rules.mk +++ b/keyboards/melgeek/mach80/rev1/rules.mk @@ -21,4 +21,6 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow RGB_MATRIX_ENABLE = yes # Use RGB matrix RGB_MATRIX_DRIVER = IS31FL3741 +LTO_ENABLE = yes + LAYOUTS = tkl_ansi From 6d807af783db91bc0a20bc12736c9c7fb1ba22ed Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Wed, 3 Nov 2021 01:00:27 +0000 Subject: [PATCH 408/595] Fix Rocketboard-16 QMK Configurator Implementation (#15028) * rename LAYOUT_default to LAYOUT Only one layout is supported. * refactor keymaps - use short-form keycodes --- keyboards/rocketboard_16/info.json | 3 +++ .../rocketboard_16/keymaps/default/keymap.c | 24 +++++++++---------- keyboards/rocketboard_16/keymaps/via/keymap.c | 24 +++++++++---------- keyboards/rocketboard_16/rocketboard_16.h | 2 +- 4 files changed, 28 insertions(+), 25 deletions(-) diff --git a/keyboards/rocketboard_16/info.json b/keyboards/rocketboard_16/info.json index 4d9c99bc6c..1ff728bfb7 100644 --- a/keyboards/rocketboard_16/info.json +++ b/keyboards/rocketboard_16/info.json @@ -2,6 +2,9 @@ "keyboard_name": "Rocketboard-16", "url": "", "maintainer": "fl3tching101", + "layout_aliases": { + "LAYOUT_default": "LAYOUT" + }, "layouts": { "LAYOUT": { "layout": [ diff --git a/keyboards/rocketboard_16/keymaps/default/keymap.c b/keyboards/rocketboard_16/keymaps/default/keymap.c index 050ab9f5b1..761816cae5 100644 --- a/keyboards/rocketboard_16/keymaps/default/keymap.c +++ b/keyboards/rocketboard_16/keymaps/default/keymap.c @@ -33,19 +33,19 @@ enum custom_keycodes { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_BASE] = LAYOUT_default( - RGB_MODE_FORWARD, KC_NUMLOCK, - KC_KP_7, KC_KP_8, KC_KP_9, KC_DELETE, - KC_KP_4, KC_KP_5, KC_KP_6, KC_END, - KC_KP_1, KC_KP_2, KC_KP_3, KC_F13, - KC_KP_0, MO(1), KC_KP_DOT, KC_KP_ENTER + [_BASE] = LAYOUT( + RGB_MOD, KC_NLCK, + KC_P7, KC_P8, KC_P9, KC_DEL, + KC_P4, KC_P5, KC_P6, KC_END, + KC_P1, KC_P2, KC_P3, KC_F13, + KC_P0, MO(1), KC_PDOT, KC_PENT ), - [_SPEC] = LAYOUT_default( - RGB_MODE_REVERSE, KC_AUDIO_MUTE, - KC_NO, KC_NO, KC_NO, KC_EXAM, - KC_NO, KC_NO, KC_NO, KC_NO, - RESET, RGB_TOG, RGB_SPI, RGB_SPD, - KC_NO, _______, KC_NO, KC_NO + [_SPEC] = LAYOUT( + RGB_RMOD, KC_MUTE, + KC_NO, KC_NO, KC_NO, KC_EXAM, + KC_NO, KC_NO, KC_NO, KC_NO, + RESET, RGB_TOG, RGB_SPI, RGB_SPD, + KC_NO, _______, KC_NO, KC_NO ) }; diff --git a/keyboards/rocketboard_16/keymaps/via/keymap.c b/keyboards/rocketboard_16/keymaps/via/keymap.c index 050ab9f5b1..761816cae5 100644 --- a/keyboards/rocketboard_16/keymaps/via/keymap.c +++ b/keyboards/rocketboard_16/keymaps/via/keymap.c @@ -33,19 +33,19 @@ enum custom_keycodes { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_BASE] = LAYOUT_default( - RGB_MODE_FORWARD, KC_NUMLOCK, - KC_KP_7, KC_KP_8, KC_KP_9, KC_DELETE, - KC_KP_4, KC_KP_5, KC_KP_6, KC_END, - KC_KP_1, KC_KP_2, KC_KP_3, KC_F13, - KC_KP_0, MO(1), KC_KP_DOT, KC_KP_ENTER + [_BASE] = LAYOUT( + RGB_MOD, KC_NLCK, + KC_P7, KC_P8, KC_P9, KC_DEL, + KC_P4, KC_P5, KC_P6, KC_END, + KC_P1, KC_P2, KC_P3, KC_F13, + KC_P0, MO(1), KC_PDOT, KC_PENT ), - [_SPEC] = LAYOUT_default( - RGB_MODE_REVERSE, KC_AUDIO_MUTE, - KC_NO, KC_NO, KC_NO, KC_EXAM, - KC_NO, KC_NO, KC_NO, KC_NO, - RESET, RGB_TOG, RGB_SPI, RGB_SPD, - KC_NO, _______, KC_NO, KC_NO + [_SPEC] = LAYOUT( + RGB_RMOD, KC_MUTE, + KC_NO, KC_NO, KC_NO, KC_EXAM, + KC_NO, KC_NO, KC_NO, KC_NO, + RESET, RGB_TOG, RGB_SPI, RGB_SPD, + KC_NO, _______, KC_NO, KC_NO ) }; diff --git a/keyboards/rocketboard_16/rocketboard_16.h b/keyboards/rocketboard_16/rocketboard_16.h index 87965906a4..927e21f7e6 100644 --- a/keyboards/rocketboard_16/rocketboard_16.h +++ b/keyboards/rocketboard_16/rocketboard_16.h @@ -4,7 +4,7 @@ #define KNO KC_NO -#define LAYOUT_default( \ +#define LAYOUT( \ K00, K01, \ K02, K03, K04, K05, \ K06, K07, K08, K09, \ From 7d66e8fe5035a7f9ffda32c13a0b74eb83681894 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Wed, 3 Nov 2021 01:01:11 +0000 Subject: [PATCH 409/595] steal_this_keyboard fix info.json macro reference (#15032) - change LAYOUT to LAYOUT_split_3x5_2 --- keyboards/steal_this_keyboard/info.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/keyboards/steal_this_keyboard/info.json b/keyboards/steal_this_keyboard/info.json index 0a0ab13e6c..7a4eabdb55 100644 --- a/keyboards/steal_this_keyboard/info.json +++ b/keyboards/steal_this_keyboard/info.json @@ -3,7 +3,7 @@ "url": "https://github.com/obosob/steal_this_keyboard", "maintainer": "@obosob", "layouts": { - "LAYOUT": { + "LAYOUT_split_3x5_2": { "layout": [ {"x": 0, "y": 0.93}, {"x": 1, "y": 0.31}, From 2d0ed4367b5dbe4878d2d1b61d9e6dffefbd4938 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Wed, 3 Nov 2021 01:18:11 +0000 Subject: [PATCH 410/595] Remove deprecated KEYMAP alias (#15037) * Remove deprecated KEYMAP alias * Remove some KEYMAP references * Remove some KEYMAP references --- keyboards/clueboard/17/info.json | 1 - keyboards/clueboard/2x1800/2018/info.json | 1 - keyboards/clueboard/2x1800/2021/info.json | 1 - keyboards/clueboard/60/info.json | 1 - keyboards/clueboard/66/rev1/info.json | 1 - keyboards/clueboard/66/rev2/info.json | 1 - keyboards/clueboard/66/rev3/info.json | 1 - keyboards/clueboard/66/rev4/info.json | 1 - keyboards/clueboard/66_hotswap/prototype/info.json | 1 - keyboards/meira/info.json | 1 - keyboards/meira/keymaps/cole/keymap.c | 8 ++++---- keyboards/meira/keymaps/grahampheath/keymap.c | 14 +++++++------- keyboards/meira/keymaps/takmiya/keymap.c | 8 ++++---- keyboards/meira/lighting.c | 2 +- quantum/config_common.h | 3 --- 15 files changed, 16 insertions(+), 29 deletions(-) diff --git a/keyboards/clueboard/17/info.json b/keyboards/clueboard/17/info.json index 8ef87244ee..fb12f7dcce 100644 --- a/keyboards/clueboard/17/info.json +++ b/keyboards/clueboard/17/info.json @@ -37,7 +37,6 @@ "vid": "0xC1ED" }, "layout_aliases": { - "KEYMAP": "LAYOUT_numpad_5x4", "LAYOUT": "LAYOUT_numpad_5x4" }, "layouts": { diff --git a/keyboards/clueboard/2x1800/2018/info.json b/keyboards/clueboard/2x1800/2018/info.json index 3028fd4c20..38e7421a14 100644 --- a/keyboards/clueboard/2x1800/2018/info.json +++ b/keyboards/clueboard/2x1800/2018/info.json @@ -41,7 +41,6 @@ "pid": "0x23A0" }, "layout_aliases": { - "KEYMAP": "LAYOUT_all", "LAYOUT": "LAYOUT_all" }, "layouts": { diff --git a/keyboards/clueboard/2x1800/2021/info.json b/keyboards/clueboard/2x1800/2021/info.json index 376b9151e5..088ce343db 100644 --- a/keyboards/clueboard/2x1800/2021/info.json +++ b/keyboards/clueboard/2x1800/2021/info.json @@ -28,7 +28,6 @@ "pid": "0x23A0" }, "layout_aliases": { - "KEYMAP": "LAYOUT_all", "LAYOUT": "LAYOUT_all" }, "layouts": { diff --git a/keyboards/clueboard/60/info.json b/keyboards/clueboard/60/info.json index 695194e827..1698d221d3 100644 --- a/keyboards/clueboard/60/info.json +++ b/keyboards/clueboard/60/info.json @@ -30,7 +30,6 @@ }, "community_layouts": ["60_ansi", "60_ansi_split_bs_rshift", "60_iso"], "layout_aliases": { - "KEYMAP": "LAYOUT_all", "LAYOUT": "LAYOUT_all" }, "layouts": { diff --git a/keyboards/clueboard/66/rev1/info.json b/keyboards/clueboard/66/rev1/info.json index c59cfa0b81..6ff733b3dd 100644 --- a/keyboards/clueboard/66/rev1/info.json +++ b/keyboards/clueboard/66/rev1/info.json @@ -43,7 +43,6 @@ }, "community_layouts": ["66_ansi", "66_iso"], "layout_aliases": { - "KEYMAP": "LAYOUT_all", "LAYOUT": "LAYOUT_all" }, "layouts": { diff --git a/keyboards/clueboard/66/rev2/info.json b/keyboards/clueboard/66/rev2/info.json index 5ef47cca98..27d293552d 100644 --- a/keyboards/clueboard/66/rev2/info.json +++ b/keyboards/clueboard/66/rev2/info.json @@ -43,7 +43,6 @@ }, "community_layouts": ["66_ansi", "66_iso"], "layout_aliases": { - "KEYMAP": "LAYOUT_all", "LAYOUT": "LAYOUT_all" }, "layouts": { diff --git a/keyboards/clueboard/66/rev3/info.json b/keyboards/clueboard/66/rev3/info.json index 1944331e2b..0f2eada753 100644 --- a/keyboards/clueboard/66/rev3/info.json +++ b/keyboards/clueboard/66/rev3/info.json @@ -43,7 +43,6 @@ }, "community_layouts": ["66_ansi", "66_iso"], "layout_aliases": { - "KEYMAP": "LAYOUT_all", "LAYOUT": "LAYOUT_all" }, "layouts": { diff --git a/keyboards/clueboard/66/rev4/info.json b/keyboards/clueboard/66/rev4/info.json index 1a81b3d088..f1f1ae4dec 100644 --- a/keyboards/clueboard/66/rev4/info.json +++ b/keyboards/clueboard/66/rev4/info.json @@ -41,7 +41,6 @@ }, "community_layouts": ["66_ansi", "66_iso"], "layout_aliases": { - "KEYMAP": "LAYOUT_all", "LAYOUT": "LAYOUT_all" }, "layouts": { diff --git a/keyboards/clueboard/66_hotswap/prototype/info.json b/keyboards/clueboard/66_hotswap/prototype/info.json index 8f31373986..d3f81851f4 100644 --- a/keyboards/clueboard/66_hotswap/prototype/info.json +++ b/keyboards/clueboard/66_hotswap/prototype/info.json @@ -43,7 +43,6 @@ }, "community_layouts": ["66_ansi"], "layout_aliases": { - "KEYMAP": "LAYOUT_all", "LAYOUT": "LAYOUT_all" }, "layouts": { diff --git a/keyboards/meira/info.json b/keyboards/meira/info.json index 0e2f12a96a..de9ce42f8e 100644 --- a/keyboards/meira/info.json +++ b/keyboards/meira/info.json @@ -3,7 +3,6 @@ "url": "", "maintainer": "colemarkham", "layout_aliases": { - "KEYMAP": "LAYOUT_ortho_4x12", "LAYOUT": "LAYOUT_ortho_4x12" }, "layouts": { diff --git a/keyboards/meira/keymaps/cole/keymap.c b/keyboards/meira/keymaps/cole/keymap.c index 14581aa572..94806c5da2 100644 --- a/keyboards/meira/keymaps/cole/keymap.c +++ b/keyboards/meira/keymaps/cole/keymap.c @@ -56,7 +56,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |Adjust| Ctrl | Ctrl | Alt |Lower | Cmd |Space |Raise | Left | Down | Up |Right | * `-----------------------------------------------------------------------------------' */ - [_QWERTY] = KEYMAP( \ + [_QWERTY] = LAYOUT( \ KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT, \ @@ -74,7 +74,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | Next | Vol- | Vol+ | Play | * `-----------------------------------------------------------------------------------' */ - [_LOWER] = KEYMAP( \ + [_LOWER] = LAYOUT( \ _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, \ KC_TILD, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, KC_QUOT, \ @@ -92,7 +92,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | Home | PgUp | PgDn | End | * `-----------------------------------------------------------------------------------' */ - [_RAISE] = KEYMAP( \ + [_RAISE] = LAYOUT( \ _______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \ KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, \ @@ -110,7 +110,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | | | | | * `-----------------------------------------------------------------------------------' */ - [_ADJUST] = KEYMAP( \ + [_ADJUST] = LAYOUT( \ RESET, _______, _______, KC_MRWD, KC_MPLY, KC_MFFD, KC_PSCR, _______, KC_MUTE, KC_VOLD, KC_VOLU, KC_DEL, \ BL_STEP, RGB_MOD, _______, AU_ON, AU_OFF, _______, _______, _______, _______, _______, _______, _______, \ BL_TOGG, RGB_TOG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ diff --git a/keyboards/meira/keymaps/grahampheath/keymap.c b/keyboards/meira/keymaps/grahampheath/keymap.c index ca47b89136..35fa31b8b8 100644 --- a/keyboards/meira/keymaps/grahampheath/keymap.c +++ b/keyboards/meira/keymaps/grahampheath/keymap.c @@ -85,7 +85,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |Emoji | Ctrl | Alt |Lower | Cmd |Space+|Space |Raise | Left | Down | Up |Right | * `-----------------------------------------------------------------------------------' */ - [_QWERTY] = KEYMAP( \ + [_QWERTY] = LAYOUT( \ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ KC_X0, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_X1, \ @@ -103,7 +103,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | * `-----------------------------------------------------------------------------------' */ - [_COLEMAK] = KEYMAP( \ + [_COLEMAK] = LAYOUT( \ KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, \ KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, \ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ @@ -121,7 +121,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | * `-----------------------------------------------------------------------------------' */ - [_DVORAK] = KEYMAP( \ + [_DVORAK] = LAYOUT( \ KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, \ KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, \ KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT , \ @@ -140,7 +140,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * │ │ │ │ │Brig-│ Sleep │Brig+│ 👈 │ 👎 | 👍 │ 👉 │ * └─────┴─────┴─────┴─────┴─────┴───────────┴─────┴─────┴─────┴─────┴─────┘ */ - [_EMOJI] = KEYMAP ( \ + [_EMOJI] = LAYOUT ( \ HYPR_0, _______, WINK, _______, _______, TOUNGE, _______, _______, CRY, FLIP, _______, _______, \ HYPR_1, ABOVE, SHRUG, _______, FROWN, _______, HEART, JOY, _______, LLAP, _______, _______, \ HYPR_2, _______, _______, _______, CONFUSED, _______, _______, GRIN, SHIT, _______, _______, _______, \ @@ -160,7 +160,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | Tab- | | | Tab+ | * `-----------------------------------------------------------------------------------' */ - [_LOWER] = KEYMAP( \ + [_LOWER] = LAYOUT( \ KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \ KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ KC_LSFT, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \ @@ -178,7 +178,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | Home | PgUp | PgDn | End | * `-----------------------------------------------------------------------------------' */ - [_RAISE] = KEYMAP( \ + [_RAISE] = LAYOUT( \ KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ KC_LSFT, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, KC_X2, \ @@ -196,7 +196,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | | | | | * `-----------------------------------------------------------------------------------' */ - [_ADJUST] = KEYMAP( \ + [_ADJUST] = LAYOUT( \ _______, RESET, _______, _______, _______, _______, KC_PSCR, _______, _______, _______, _______, KC_DEL, \ _______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ diff --git a/keyboards/meira/keymaps/takmiya/keymap.c b/keyboards/meira/keymaps/takmiya/keymap.c index 171b4f43ae..25f50abc49 100644 --- a/keyboards/meira/keymaps/takmiya/keymap.c +++ b/keyboards/meira/keymaps/takmiya/keymap.c @@ -50,7 +50,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | Ctrl | GUI | Alt | GUI |Lower |Space |Enter |Raise | Left | Down | Up |Right | * `-----------------------------------------------------------------------------------' */ - [_QWERTY] = KEYMAP( \ + [_QWERTY] = LAYOUT( \ KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, GUI_T(KC_SLSH), KC_ENT, \ @@ -68,7 +68,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | | Home | PgUp | PgDn | End | * `-----------------------------------------------------------------------------------' */ - [_LOWER] = KEYMAP( \ + [_LOWER] = LAYOUT( \ KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, \ _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, S(KC_NUHS), S(KC_NUBS), _______, _______, _______, \ @@ -86,7 +86,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | | Home | PgUp | PgDn | End | * `-----------------------------------------------------------------------------------' */ - [_RAISE] = KEYMAP( \ + [_RAISE] = LAYOUT( \ KC_GRV , KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, \ _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, \ @@ -104,7 +104,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | | | | | | | | | | | | * `-----------------------------------------------------------------------------------' */ - [_ADJUST] = KEYMAP( \ + [_ADJUST] = LAYOUT( \ BL_TOGG, RESET, _______, KC_MRWD, KC_MPLY, KC_MFFD, KC_PSCR, _______, KC_MUTE, KC_VOLD, KC_VOLU, KC_DEL, \ BL_STEP, RGB_MOD, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, _______, _______, _______, _______, \ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ diff --git a/keyboards/meira/lighting.c b/keyboards/meira/lighting.c index a02487f69b..1a3c954bcf 100755 --- a/keyboards/meira/lighting.c +++ b/keyboards/meira/lighting.c @@ -23,7 +23,7 @@ const uint8_t backlight_pwm_map[BACKLIGHT_LEVELS] = BACKLIGHT_PWM_MAP; // / | // Device // const uint8_t switch_leds[MATRIX_ROWS][MATRIX_COLS] = -// KEYMAP( +// LAYOUT( // 0x29, 0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0xA9, 0xA8, 0xA7, 0xA6, 0xA5, // 0x39, 0x38, 0x37, 0x36, 0x35, 0x34, 0x33, 0x32, 0x31, 0xB9, 0xB8, 0xB7, 0xB6, 0xB5, // 0x49, 0x48, 0x47, 0x45, 0x44, 0x43, 0x42, 0x41, 0xC9, 0xC8, 0xC7, 0xC6, diff --git a/quantum/config_common.h b/quantum/config_common.h index 661609ef2a..d93477b27e 100644 --- a/quantum/config_common.h +++ b/quantum/config_common.h @@ -24,7 +24,4 @@ #define COL2ROW 0 #define ROW2COL 1 -// Deprecated alias - avoid using -#define KEYMAP LAYOUT - #include "song_list.h" From 712c01e98fb8583b3509cd9e03434b74c174f950 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Wed, 3 Nov 2021 16:31:07 +0000 Subject: [PATCH 411/595] Sets3n kk980 Layout Macro Refactor (#15039) * physically arrange layout macro Arranges the layout macro to resemble the keyboard layout, and updates the keymaps to match. * use 3-character notation for position identifiers in kk980.h * add matrix diagram to kk980.h * fix syntax error in info.json Apparently the API doesn't care about this error... but QMK Configurator does if you use the local import mode (Ctrl+Shift+I). --- keyboards/sets3n/kk980/info.json | 3 +- .../sets3n/kk980/keymaps/default/keymap.c | 33 ++++++------ keyboards/sets3n/kk980/keymaps/via/keymap.c | 33 ++++++------ keyboards/sets3n/kk980/kk980.h | 50 +++++++++++++------ 4 files changed, 70 insertions(+), 49 deletions(-) diff --git a/keyboards/sets3n/kk980/info.json b/keyboards/sets3n/kk980/info.json index 5c1cabafe2..dad5530d44 100644 --- a/keyboards/sets3n/kk980/info.json +++ b/keyboards/sets3n/kk980/info.json @@ -106,11 +106,10 @@ {"label":"DOWN", "x": 14.25, "y": 5.75}, {"label":"RIGHT", "x": 15.25, "y": 5.75}, {"label":"0", "x": 16.5, "y": 5.5}, - {"label":".DEL", "x": 17.5, "y": 5.5,}, + {"label":".DEL", "x": 17.5, "y": 5.5}, {"label":"ENTER", "x": 18.5, "y": 4.5, "h": 2} ] } } } - diff --git a/keyboards/sets3n/kk980/keymaps/default/keymap.c b/keyboards/sets3n/kk980/keymaps/default/keymap.c index 171cdb2127..f4255f4505 100644 --- a/keyboards/sets3n/kk980/keymaps/default/keymap.c +++ b/keyboards/sets3n/kk980/keymaps/default/keymap.c @@ -18,22 +18,23 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_INS, KC_PGDN, KC_PGUP, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_P7, KC_P8, KC_P9, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_BSPC, KC_BSLS, KC_RALT, KC_RGUI, MO(1), KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT), - - [1] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, BL_TOGG, BL_DEC, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), - + [0] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_INS, KC_PGDN, KC_PGUP, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT + ), + + [1] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, BL_TOGG, BL_DEC, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) }; diff --git a/keyboards/sets3n/kk980/keymaps/via/keymap.c b/keyboards/sets3n/kk980/keymaps/via/keymap.c index 171cdb2127..f4255f4505 100644 --- a/keyboards/sets3n/kk980/keymaps/via/keymap.c +++ b/keyboards/sets3n/kk980/keymaps/via/keymap.c @@ -18,22 +18,23 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_INS, KC_PGDN, KC_PGUP, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_P7, KC_P8, KC_P9, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_BSPC, KC_BSLS, KC_RALT, KC_RGUI, MO(1), KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT), - - [1] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, BL_TOGG, BL_DEC, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), - + [0] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_INS, KC_PGDN, KC_PGUP, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT + ), + + [1] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, BL_TOGG, BL_DEC, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) }; diff --git a/keyboards/sets3n/kk980/kk980.h b/keyboards/sets3n/kk980/kk980.h index 238d124beb..c7589e8c40 100644 --- a/keyboards/sets3n/kk980/kk980.h +++ b/keyboards/sets3n/kk980/kk980.h @@ -1,15 +1,15 @@ /* Copyright 2021 Sets3n - * + * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation, either version 2 of the License, or * (at your option) any later version. - * + * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * + * * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ @@ -17,18 +17,38 @@ #include "quantum.h" +#define XXX KC_NO + +/* + * ┌───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ + * │00 │ │01 │02 │03 │04 │ │05 │06 │07 │08 │ │09 │0A │0B │0C │ │0D │0E │0F │0G │ + * └───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ ┌───┬───┬───┬───┐ + * │10 │11 │12 │13 │14 │15 │16 │17 │18 │19 │1A │1B │1C │56 │ │1D │1E │1F │1G │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ ├───┼───┼───┼───┤ + * │20 │21 │22 │23 │24 │25 │26 │27 │28 │29 │2A │2B │2C │57 │ │2D │2E │2F │ │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ ├───┼───┼───┤3G │ + * │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3A │3B │3C │ │3D │3E │3F │ │ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┘ ├───┼───┼───┼───┤ + * │40 │41 │42 │43 │44 │45 │46 │47 │48 │49 │4A │4B │┌───┐│4D │4E │4F │ │ + * ├────┬───┼───┴┬──┴───┴───┴───┴───┴───┴─┬─┴─┬─┴─┬─┴──┬───┘│4C │└───┼───┼───┤5G │ + * │50 │51 │52 │55 │58 │59 │5A │┌───┼───┼───┐│5E │5F │ │ + * └────┴───┴────┴────────────────────────┴───┴───┴────┘│5B │5C │5D │└───┴───┴───┘ + * └───┴───┴───┘ + */ + #define LAYOUT( \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K316, \ - K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414, K415, \ - K500, K501, K502, K505, K506, K507, K508, K509, K510, K511, K512, K513, K514, K515, K516 \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K56, K1D, K1E, K1F, K1G, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K57, K2D, K2E, K2F, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, K3F, K3G, \ + K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E, K4F, \ + K50, K51, K52, K55, K58, K59, K5A, K5B, K5C, K5D, K5E, K5F, K5G \ ) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016 }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116 }, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, KC_NO }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K316 }, \ - { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414, K415, KC_NO }, \ - { K500, K501, K502, KC_NO, KC_NO, K505, K506, K507, K508, K509, K510, K511, K512, K513, K514, K515, K516 } \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, K3F, K3G }, \ + { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E, K4F, XXX }, \ + { K50, K51, K52, XXX, XXX, K55, K56, K57, K58, K59, K5A, K5B, K5C, K5D, K5E, K5F, K5G } \ } From 8fa8712987961a8d5bc5f5431a237ec9e71fb11d Mon Sep 17 00:00:00 2001 From: jurassic73 <50930136+jurassic73@users.noreply.github.com> Date: Wed, 3 Nov 2021 21:14:21 -0700 Subject: [PATCH 412/595] [Keyboard] Layout update to split89.h (#14930) --- keyboards/handwired/split89/split89.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/keyboards/handwired/split89/split89.h b/keyboards/handwired/split89/split89.h index 44c0d0d702..7e94027078 100644 --- a/keyboards/handwired/split89/split89.h +++ b/keyboards/handwired/split89/split89.h @@ -27,12 +27,12 @@ * represents the switch matrix which includes blanks in the wired out matrix. */ #define LAYOUT( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, k14, k15, \ - k32, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k30, k31, \ - k48, k33, k34, k35, k36, k37, k38, k39, k40, k41, k42, k43, k44, k45, k46, k47, \ - k61, k49, k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k60, \ - k74, k62, k63, k64, k65, k66, k67, k68, k69, k70, k71, k72, k73, \ - k75, k76, k77, k78, k79, k80, k81, k82, k83, k84, k85, k86, k87, k88 \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, k14, k15, \ + k32, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k30, k31, \ + k48, k33, k34, k35, k36, k37, k54, k38, k39, k40, k41, k42, k43, k44, k45, k46, k47, \ + k61, k49, k50, k51, k52, k53, k67, k55, k56, k57, k58, k59, k60, \ + k74, k62, k63, k64, k65, k66, k80, k68, k69, k70, k71, k72, k73, \ + k75, k76, k77, k78, k79, k81, k82, k83, k84, k85, k86, k87, k88 \ ) \ { \ { KC_NO, KC_NO, KC_NO, KC_NO, k00, k01, k02, k03, k04, k05 }, \ From c8c7386ed4296697e831c49ef899844c47bf7555 Mon Sep 17 00:00:00 2001 From: Wolf Van Herreweghe Date: Thu, 4 Nov 2021 05:16:32 +0100 Subject: [PATCH 413/595] [Keyboard] Add the Kuku65 (#14910) Co-authored-by: Joel Challis Co-authored-by: Drashna Jaelre Co-authored-by: Wolf Van Herreweghe --- keyboards/wolf/kuku65/config.h | 56 ++++ keyboards/wolf/kuku65/info.json | 288 ++++++++++++++++++ .../wolf/kuku65/keymaps/default/keymap.c | 67 ++++ keyboards/wolf/kuku65/keymaps/via/keymap.c | 85 ++++++ keyboards/wolf/kuku65/keymaps/via/rules.mk | 1 + keyboards/wolf/kuku65/kuku65.c | 14 + keyboards/wolf/kuku65/kuku65.h | 32 ++ keyboards/wolf/kuku65/readme.md | 22 ++ keyboards/wolf/kuku65/rules.mk | 24 ++ 9 files changed, 589 insertions(+) create mode 100644 keyboards/wolf/kuku65/config.h create mode 100644 keyboards/wolf/kuku65/info.json create mode 100644 keyboards/wolf/kuku65/keymaps/default/keymap.c create mode 100644 keyboards/wolf/kuku65/keymaps/via/keymap.c create mode 100644 keyboards/wolf/kuku65/keymaps/via/rules.mk create mode 100644 keyboards/wolf/kuku65/kuku65.c create mode 100644 keyboards/wolf/kuku65/kuku65.h create mode 100644 keyboards/wolf/kuku65/readme.md create mode 100644 keyboards/wolf/kuku65/rules.mk diff --git a/keyboards/wolf/kuku65/config.h b/keyboards/wolf/kuku65/config.h new file mode 100644 index 0000000000..7c5afed524 --- /dev/null +++ b/keyboards/wolf/kuku65/config.h @@ -0,0 +1,56 @@ +/* +Copyright 2020 + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x5453 // TS - ToastyStoemp +#define PRODUCT_ID 0x0052 // kuku65 +#define DEVICE_VER 0x0001 // Version 1 +#define MANUFACTURER ToastyStoemp +#define PRODUCT kuku65 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ + +// Checked with Eagle Schematic +#define MATRIX_ROW_PINS { B3, B2, B1, B0, B7 } +#define MATRIX_COL_PINS { D0, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, D1 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION diff --git a/keyboards/wolf/kuku65/info.json b/keyboards/wolf/kuku65/info.json new file mode 100644 index 0000000000..1cd162aa32 --- /dev/null +++ b/keyboards/wolf/kuku65/info.json @@ -0,0 +1,288 @@ +{ + "keyboard_name": "kuku65", + "url": "", + "maintainer": "ToastyStoemp", + "layouts": { + "LAYOUT": { + "layout": [ + { + "x": 0, + "y": 0 + }, + { + "x": 1, + "y": 0 + }, + { + "x": 2, + "y": 0 + }, + { + "x": 3, + "y": 0 + }, + { + "x": 4, + "y": 0 + }, + { + "x": 5, + "y": 0 + }, + { + "x": 6, + "y": 0 + }, + { + "x": 7, + "y": 0 + }, + { + "x": 8, + "y": 0 + }, + { + "x": 9, + "y": 0 + }, + { + "x": 10, + "y": 0 + }, + { + "x": 11, + "y": 0 + }, + { + "x": 12, + "y": 0 + }, + { + "x": 13, + "y": 0, + "w": 2 + }, + { + "x": 0, + "y": 1, + "w": 1.5 + }, + { + "x": 1.5, + "y": 1 + }, + { + "x": 2.5, + "y": 1 + }, + { + "x": 3.5, + "y": 1 + }, + { + "x": 4.5, + "y": 1 + }, + { + "x": 5.5, + "y": 1 + }, + { + "x": 6.5, + "y": 1 + }, + { + "x": 7.5, + "y": 1 + }, + { + "x": 8.5, + "y": 1 + }, + { + "x": 9.5, + "y": 1 + }, + { + "x": 10.5, + "y": 1 + }, + { + "x": 11.5, + "y": 1 + }, + { + "x": 12.5, + "y": 1 + }, + { + "x": 13.5, + "y": 1, + "w": 1.5 + }, + { + "x": 15, + "y": 1 + }, + { + "x": 0, + "y": 2, + "w": 1.75 + }, + { + "x": 1.75, + "y": 2 + }, + { + "x": 2.75, + "y": 2 + }, + { + "x": 3.75, + "y": 2 + }, + { + "x": 4.75, + "y": 2 + }, + { + "x": 5.75, + "y": 2 + }, + { + "x": 6.75, + "y": 2 + }, + { + "x": 7.75, + "y": 2 + }, + { + "x": 8.75, + "y": 2 + }, + { + "x": 9.75, + "y": 2 + }, + { + "x": 10.75, + "y": 2 + }, + { + "x": 11.75, + "y": 2 + }, + { + "x": 12.75, + "y": 2, + "w": 2.25 + }, + { + "x": 15, + "y": 2 + }, + { + "x": 0, + "y": 3, + "w": 2.25 + }, + { + "x": 2.25, + "y": 3 + }, + { + "x": 3.25, + "y": 3 + }, + { + "x": 4.25, + "y": 3 + }, + { + "x": 5.25, + "y": 3 + }, + { + "x": 6.25, + "y": 3 + }, + { + "x": 7.25, + "y": 3 + }, + { + "x": 8.25, + "y": 3 + }, + { + "x": 9.25, + "y": 3 + }, + { + "x": 10.25, + "y": 3 + }, + { + "x": 11.25, + "y": 3 + }, + { + "x": 12.25, + "y": 3, + "w": 1.75 + }, + { + "x": 14, + "y": 3 + }, + { + "x": 15, + "y": 3 + }, + { + "x": 0, + "y": 4, + "w": 1.25 + }, + { + "x": 1.25, + "y": 4, + "w": 1.25 + }, + { + "x": 2.5, + "y": 4, + "w": 1.25 + }, + { + "x": 3.75, + "y": 4, + "w": 6.25 + }, + { + "x": 10, + "y": 4, + "w": 1.25 + }, + { + "x": 11.25, + "y": 4, + "w": 1.25 + }, + { + "x": 13, + "y": 4 + }, + { + "x": 14, + "y": 4 + }, + { + "x": 15, + "y": 4 + } + ] + } + } +} diff --git a/keyboards/wolf/kuku65/keymaps/default/keymap.c b/keyboards/wolf/kuku65/keymaps/default/keymap.c new file mode 100644 index 0000000000..11d9f26ff5 --- /dev/null +++ b/keyboards/wolf/kuku65/keymaps/default/keymap.c @@ -0,0 +1,67 @@ +/* +Copyright 2020 +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + +enum layers { + _LAYER0, + _LAYER1, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐ + * │Esc│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ Backsp│Hom│ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤ + * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │PgU│ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤ + * │ Ctrl │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter │PgD│ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤ + * │ Shift │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ Shift│ ↑ │End│ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤ + * │Ctrl│GUI │Alt │ │Alt │FN │ │ ← │ ↓ │ → │ + * └────┴────┴────┴────────────────────────┴────┴────┴─┴───┴───┴───┘ + */ + + [_LAYER0] = LAYOUT( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + + /* + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐ + * │ ` │ F1│ F2│ F3│ F4│ F5│ F6│ F7│ F8│ F9│F10│F11│F12│ │ │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤ + * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤ + * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤ + * │ │ │ │ │ │Res│ │ │ │ │ │ │ V+│ V0│ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤ + * │ │ │ │ │ │ │ │ PT│ V-│ NT│ + * └────┴────┴────┴────────────────────────┴────┴────┴─┴───┴───┴───┘ + */ + + [_LAYER1] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_AUDIO_VOL_UP, KC_AUDIO_MUTE, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MEDIA_PREV_TRACK, KC_AUDIO_VOL_DOWN, KC_MEDIA_NEXT_TRACK + ) +}; diff --git a/keyboards/wolf/kuku65/keymaps/via/keymap.c b/keyboards/wolf/kuku65/keymaps/via/keymap.c new file mode 100644 index 0000000000..44618f676b --- /dev/null +++ b/keyboards/wolf/kuku65/keymaps/via/keymap.c @@ -0,0 +1,85 @@ +/* +Copyright 2020 +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + +enum layers { + _LAYER0, + _LAYER1, + _LAYER2, + _LAYER3, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐ + * │Esc│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ Backsp│Hom│ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤ + * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │PgU│ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤ + * │ Ctrl │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ Enter │PgD│ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤ + * │ Shift │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ Shift│ ↑ │End│ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤ + * │Ctrl│GUI │Alt │ │Alt │FN │ │ ← │ ↓ │ → │ + * └────┴────┴────┴────────────────────────┴────┴────┴─┴───┴───┴───┘ + */ + + [_LAYER0] = LAYOUT( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + + /* + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐ + * │ ` │ F1│ F2│ F3│ F4│ F5│ F6│ F7│ F8│ F9│F10│F11│F12│ │ │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤ + * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤ + * │ │ │ │ │ │ │ │ │ │ │ │ │ │ │ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤ + * │ │ │ │ │ │Res│ │ │ │ │ │ │ V+│ V0│ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤ + * │ │ │ │ │ │ │ │ PT│ V-│ NT│ + * └────┴────┴────┴────────────────────────┴────┴────┴─┴───┴───┴───┘ + */ + + [_LAYER1] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_AUDIO_VOL_UP, KC_AUDIO_MUTE, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MEDIA_PREV_TRACK, KC_AUDIO_VOL_DOWN, KC_MEDIA_NEXT_TRACK + ), + + [_LAYER2] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + [_LAYER3] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/wolf/kuku65/keymaps/via/rules.mk b/keyboards/wolf/kuku65/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/wolf/kuku65/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/wolf/kuku65/kuku65.c b/keyboards/wolf/kuku65/kuku65.c new file mode 100644 index 0000000000..9c1be8cb83 --- /dev/null +++ b/keyboards/wolf/kuku65/kuku65.c @@ -0,0 +1,14 @@ +/* +Copyright 2020 +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include "kuku65.h" diff --git a/keyboards/wolf/kuku65/kuku65.h b/keyboards/wolf/kuku65/kuku65.h new file mode 100644 index 0000000000..d8ad847274 --- /dev/null +++ b/keyboards/wolf/kuku65/kuku65.h @@ -0,0 +1,32 @@ +/* +Copyright 2020 +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "quantum.h" + +/* kuku65 Keymap Definitions */ +#define LAYOUT( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K2E, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K46, K49, K4A, K4C, K4D, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, KC_NO }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, K2E }, \ + { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, K49, K4A, KC_NO, K4C, K4D, K4E } \ +} diff --git a/keyboards/wolf/kuku65/readme.md b/keyboards/wolf/kuku65/readme.md new file mode 100644 index 0000000000..34c4f33422 --- /dev/null +++ b/keyboards/wolf/kuku65/readme.md @@ -0,0 +1,22 @@ +# kuku65 + +The following is the QMK Firmware for the kuku65 Hotswap PCB. + +The PCB features: +* QMK & VIA compatibility +* Hotswap + +--- + +* Keyboard Maintainer: [ToastyStoemp](https://github.com/ToastyStoemp) + +Make example for this keyboard (after setting up your build environment): + + make wolf/kuku65:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader Enter the bootloader in 3 ways: +* **Bootmagic reset**: Hold down the key ESC key and plug in the keyboard (Top Left most switch) +* **Physical reset button**: Briefly press the button on the back of the PCB +* **Keycode in layout**: Press the B key on layer 1 which is mapped to `RESET` diff --git a/keyboards/wolf/kuku65/rules.mk b/keyboards/wolf/kuku65/rules.mk new file mode 100644 index 0000000000..8fc7be19c1 --- /dev/null +++ b/keyboards/wolf/kuku65/rules.mk @@ -0,0 +1,24 @@ +# MCU name +MCU = atmega32u4 + +# Processor frequency +F_CPU = 8000000 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output From 3f33362740ff8cc8f0d96e99ace71fe82e62c30d Mon Sep 17 00:00:00 2001 From: Mike Killewald Date: Thu, 4 Nov 2021 00:20:35 -0400 Subject: [PATCH 414/595] [Keymap] added caps lock indicator for Keychron Q1 rev_0100 (#14653) --- .../q1/rev_0100/keymaps/mkillewald/config.h | 23 +++ .../q1/rev_0100/keymaps/mkillewald/keymap.c | 175 ++++++++++++++++++ .../rev_0100/keymaps/mkillewald/keymap_user.h | 33 ++++ .../q1/rev_0100/keymaps/mkillewald/readme.md | 54 ++++++ .../keymaps/mkillewald/rgb_matrix_user.c | 83 +++++++++ .../keymaps/mkillewald/rgb_matrix_user.h | 26 +++ .../q1/rev_0100/keymaps/mkillewald/rules.mk | 6 + .../rev_0102/keymaps/mkillewald_iso/config.h | 23 +++ .../rev_0102/keymaps/mkillewald_iso/keymap.c | 175 ++++++++++++++++++ .../keymaps/mkillewald_iso/keymap_user.h | 33 ++++ .../rev_0102/keymaps/mkillewald_iso/readme.md | 54 ++++++ .../keymaps/mkillewald_iso/rgb_matrix_user.c | 83 +++++++++ .../keymaps/mkillewald_iso/rgb_matrix_user.h | 26 +++ .../rev_0102/keymaps/mkillewald_iso/rules.mk | 6 + 14 files changed, 800 insertions(+) create mode 100644 keyboards/keychron/q1/rev_0100/keymaps/mkillewald/config.h create mode 100644 keyboards/keychron/q1/rev_0100/keymaps/mkillewald/keymap.c create mode 100644 keyboards/keychron/q1/rev_0100/keymaps/mkillewald/keymap_user.h create mode 100644 keyboards/keychron/q1/rev_0100/keymaps/mkillewald/readme.md create mode 100644 keyboards/keychron/q1/rev_0100/keymaps/mkillewald/rgb_matrix_user.c create mode 100644 keyboards/keychron/q1/rev_0100/keymaps/mkillewald/rgb_matrix_user.h create mode 100644 keyboards/keychron/q1/rev_0100/keymaps/mkillewald/rules.mk create mode 100644 keyboards/keychron/q1/rev_0102/keymaps/mkillewald_iso/config.h create mode 100644 keyboards/keychron/q1/rev_0102/keymaps/mkillewald_iso/keymap.c create mode 100644 keyboards/keychron/q1/rev_0102/keymaps/mkillewald_iso/keymap_user.h create mode 100644 keyboards/keychron/q1/rev_0102/keymaps/mkillewald_iso/readme.md create mode 100644 keyboards/keychron/q1/rev_0102/keymaps/mkillewald_iso/rgb_matrix_user.c create mode 100644 keyboards/keychron/q1/rev_0102/keymaps/mkillewald_iso/rgb_matrix_user.h create mode 100644 keyboards/keychron/q1/rev_0102/keymaps/mkillewald_iso/rules.mk diff --git a/keyboards/keychron/q1/rev_0100/keymaps/mkillewald/config.h b/keyboards/keychron/q1/rev_0100/keymaps/mkillewald/config.h new file mode 100644 index 0000000000..bc9fe405c3 --- /dev/null +++ b/keyboards/keychron/q1/rev_0100/keymaps/mkillewald/config.h @@ -0,0 +1,23 @@ +/* Copyright 2021 @ Mike Killewald + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#ifdef RGB_MATRIX_ENABLE +# define RGB_DISABLE_WHEN_USB_SUSPENDED +# define CAPS_LOCK_INDICATOR_COLOR RGB_RED +# define FN_LAYER_COLOR RGB_ORANGE +#endif \ No newline at end of file diff --git a/keyboards/keychron/q1/rev_0100/keymaps/mkillewald/keymap.c b/keyboards/keychron/q1/rev_0100/keymaps/mkillewald/keymap.c new file mode 100644 index 0000000000..937b20ee10 --- /dev/null +++ b/keyboards/keychron/q1/rev_0100/keymaps/mkillewald/keymap.c @@ -0,0 +1,175 @@ +/* Copyright 2021 @ Mike Killewald + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H +#include "keymap_user.h" +#ifdef RGB_MATRIX_ENABLE +# include "rgb_matrix_user.h" +#endif + +// clang-format off + +typedef union { + uint32_t raw; + struct { + bool caps_lock_light_tab :1; + bool caps_lock_light_alphas :1; + bool fn_layer_transparent_keys_off :1; + bool fn_layer_color_enable :1; + }; +} user_config_t; + +user_config_t user_config; + +enum custom_keycodes { +#ifdef VIA_ENABLE + KC_MISSION_CONTROL = USER00, +#else + KC_MISSION_CONTROL = SAFE_RANGE, +#endif + KC_LAUNCHPAD, + KC_LIGHT_TAB_TOGGLE, + KC_LIGHT_ALPHAS_TOGGLE, + KC_FN_LAYER_TRANSPARENT_KEYS_TOGGLE, + KC_FN_LAYER_COLOR_TOGGLE +}; + +#define KC_MCTL KC_MISSION_CONTROL +#define KC_LPAD KC_LAUNCHPAD +#define KC_LTTOG KC_LIGHT_TAB_TOGGLE +#define KC_LATOG KC_LIGHT_ALPHAS_TOGGLE +#define KC_TKTOG KC_FN_LAYER_TRANSPARENT_KEYS_TOGGLE +#define KC_FCTOG KC_FN_LAYER_COLOR_TOGGLE +#define KC_TASK LGUI(KC_TAB) +#define KC_FLXP LGUI(KC_E) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[MAC_BASE] = LAYOUT_ansi_82( + KC_ESC, KC_BRID, KC_BRIU, KC_MCTL, KC_LPAD, RGB_VAD, RGB_VAI, KC_MPRV, KC_MPLY, KC_MNXT, KC_MUTE, KC_VOLD, KC_VOLU, KC_DEL, KC_INS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_HOME, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, MO(MAC_FN),KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + +[MAC_FN] = LAYOUT_ansi_82( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + RGB_TOG, RGB_MOD, RGB_VAI, RGB_HUI, RGB_SAI, RGB_SPI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, RGB_RMOD, RGB_VAD, RGB_HUD, RGB_SAD, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_LTTOG, KC_LATOG, KC_TKTOG, KC_FCTOG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + +[WIN_BASE] = LAYOUT_ansi_82( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_INS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_HOME, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(WIN_FN),KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + +[WIN_FN] = LAYOUT_ansi_82( + KC_TRNS, KC_BRID, KC_BRIU, KC_TASK, KC_FLXP, RGB_VAD, RGB_VAI, KC_MPRV, KC_MPLY, KC_MNXT, KC_MUTE, KC_VOLD, KC_VOLU, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + RGB_TOG, RGB_MOD, RGB_VAI, RGB_HUI, RGB_SAI, RGB_SPI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, RGB_RMOD, RGB_VAD, RGB_HUD, RGB_SAD, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_LTTOG, KC_LATOG, KC_TKTOG, KC_FCTOG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) + +}; + +// clang-format on + +void matrix_init_user(void) { +#ifdef RGB_MATRIX_ENABLE + rgb_matrix_init_user(); +#endif +} + +void keyboard_post_init_user(void) { + user_config.raw = eeconfig_read_user(); +} + +void eeconfig_init_user(void) { + user_config.raw = 0; + user_config.caps_lock_light_tab = false; + user_config.caps_lock_light_alphas = false; + user_config.fn_layer_transparent_keys_off = true; + user_config.fn_layer_color_enable = false; + eeconfig_update_user(user_config.raw); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case KC_MISSION_CONTROL: + if (record->event.pressed) { + host_consumer_send(0x29F); + } else { + host_consumer_send(0); + } + return false; // Skip all further processing of this key + case KC_LAUNCHPAD: + if (record->event.pressed) { + host_consumer_send(0x2A0); + } else { + host_consumer_send(0); + } + return false; // Skip all further processing of this key + case KC_LIGHT_TAB_TOGGLE: + if (record->event.pressed) { + user_config.caps_lock_light_tab ^= 1; // bitwise xor to toggle status bit + eeconfig_update_user(user_config.raw); + } + return false; // Skip all further processing of this key + case KC_LIGHT_ALPHAS_TOGGLE: + if (record->event.pressed) { + user_config.caps_lock_light_alphas ^= 1; + eeconfig_update_user(user_config.raw); + } + return false; // Skip all further processing of this key + case KC_FN_LAYER_TRANSPARENT_KEYS_TOGGLE: + if (record->event.pressed) { + user_config.fn_layer_transparent_keys_off ^= 1; + eeconfig_update_user(user_config.raw); + } + return false; // Skip all further processing of this key + case KC_FN_LAYER_COLOR_TOGGLE: + if (record->event.pressed) { + user_config.fn_layer_color_enable ^= 1; + eeconfig_update_user(user_config.raw); + } + return false; // Skip all further processing of this key + default: + return true; // Process all other keycodes normally + } +} + +bool get_caps_lock_light_tab(void) { + return user_config.caps_lock_light_tab; +} + +bool get_caps_lock_light_alphas(void) { + return user_config.caps_lock_light_alphas; +} + +bool get_fn_layer_transparent_keys_off(void) { + return user_config.fn_layer_transparent_keys_off; +} + +bool get_fn_layer_color_enable(void) { + return user_config.fn_layer_color_enable; +} \ No newline at end of file diff --git a/keyboards/keychron/q1/rev_0100/keymaps/mkillewald/keymap_user.h b/keyboards/keychron/q1/rev_0100/keymaps/mkillewald/keymap_user.h new file mode 100644 index 0000000000..87b1baf47f --- /dev/null +++ b/keyboards/keychron/q1/rev_0100/keymaps/mkillewald/keymap_user.h @@ -0,0 +1,33 @@ +/* Copyright 2021 @ Mike Killewald + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +// clang-format off + +enum layers { + MAC_BASE, + MAC_FN, + WIN_BASE, + WIN_FN +}; + +// clang-format on + +bool get_caps_lock_light_tab(void); +bool get_caps_lock_light_alphas(void); +bool get_fn_layer_transparent_keys_off(void); +bool get_fn_layer_color_enable(void); \ No newline at end of file diff --git a/keyboards/keychron/q1/rev_0100/keymaps/mkillewald/readme.md b/keyboards/keychron/q1/rev_0100/keymaps/mkillewald/readme.md new file mode 100644 index 0000000000..f8d5de012f --- /dev/null +++ b/keyboards/keychron/q1/rev_0100/keymaps/mkillewald/readme.md @@ -0,0 +1,54 @@ +## mkillewald's Keychron Q1 keymap (ANSI rev_0100) v1.0.4 + +This keymap builds on the keymap by Grayson Carr (gtg465x) but adds a couple options. + +## Features: +- On macOS, F3 opens Mission Control and F4 opens Launchpad without needing to configure shortcuts in System Preferences +- RGB lighting turns off when the computer sleeps +- Caps Lock RGB indicator + - the Caps Lock key will light when Caps Lock is enabled with the following options: + - #define CAPS_LOCK_INDICATOR_COLOR [color] in config.h to set the backlight color used for the indicator when Caps Lock is enabled (default: red) + - Fn+Z will toggle lighting the TAB key when Caps Lock is enabled. This is useful with non backlit keycaps/legends. (default: off) + - Fn+X will toggle lighting all the alpha keys when Caps Lock is enabled. (default: off) + +- Dynamic Fn layer RGB indicator + - When the Fn key is held down, any keys defined on the Fn layer in this firmware or in VIA will be highlighted with the following options: + - #define FN_LAYER_COLOR [color] in config.h to set a static color for defined keys (default: orange) + - Fn+C will toggle turning off RGB for keys with no definition (default: RGB off) + - Fn+V will toggle lighting the defined Fn layer keys with the static color set with FN_LAYER_COLOR (default: static color off) + +- All custom keycodes can be moved to different keys in VIA by using the ANY key with the following keycodes: + - USER00 (default: F3) macOS Mission Control + - USER01 (default: F4) macOS Launchpad + - USER02 (default: Fn+Z) Caps Lock light Tab toggle + - USER03 (default: Fn+X) Caps Lock light alphas toggle + - USER04 (default: Fn+C) Fn layer non-defined keys RGB toggle + - USER05 (default: Fn+V) Fn layer defined keys static color toggle + +RGB must be toggled on for all indicators to function. If you do not want an RGB mode active but still want the indicators, toggle RGB on and turn the brightness all the way off. The indicators will remain at full brightness. + +Please make sure to save any customizations you have made in VIA to a .json file before flashing the firmware. Sometimes it has been necessary to re-apply those changes in VIA after flashing the firmware. If that is the case, you will most likely need to manually add the USER00 through USER05 custom keycodes after loading your customizations from the saved .json file. Then re-save a new .json file which will have your previous customizations and the custom keycodes for future use as needed. + +#### USE AT YOUR OWN RISK + +## Changelog: + +v1.0.4 October 9, 2021 +- Caps Lock and Fn layer toggles are now stored in eeprom so settings will remain when Q1 is unplugged + +v1.0.3 October 8, 2021 +- now using keycode toggles instead of preprocessor directive to set the various Caps Lock and Fn Layer RGB lighting options. This allows for setting the options from user space without having to recompile. + +v1.0.2 October 7, 2021 +- adapted Grayson Carr's (gtg465x) Caps Lock alphas and dynamic Fn layer RGB routines +- added CAPS_LOCK_INDICATOR_LIGHT_TAB config option to enable/disable lighting Tab with Caps Lock indicator +- added FN_LAYER_COLOR config option to set FN layer static color + +v1.0.1 October 7, 2021 +- Mission Control and Launchpad custom keycodes are now defined using the VIA user keycodes range so thay can be labeled properly in VIA (adopted change from gtg465x) + +v1.0.0 September 30, 2021 +- Initial release built upon keymap by Grayson Carr (gtg465x) +- defined Mission Control (F3) and Launchpad (F4) keycodes for macOs +- RGB backlight turns off when computer sleeps +- added Caps Lock indicator lighting both the Caps Lock and Tab LEDs for better effect on non-backlit keycaps diff --git a/keyboards/keychron/q1/rev_0100/keymaps/mkillewald/rgb_matrix_user.c b/keyboards/keychron/q1/rev_0100/keymaps/mkillewald/rgb_matrix_user.c new file mode 100644 index 0000000000..f06039af06 --- /dev/null +++ b/keyboards/keychron/q1/rev_0100/keymaps/mkillewald/rgb_matrix_user.c @@ -0,0 +1,83 @@ +/* Copyright 2021 @ Mike Killewald + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H +#include "rgb_matrix_user.h" +#include "keymap_user.h" + +keypos_t led_index_key_position[DRIVER_LED_TOTAL]; + +void rgb_matrix_init_user(void) { + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + for (uint8_t col = 0; col < MATRIX_COLS; col++) { + uint8_t led_index = g_led_config.matrix_co[row][col]; + if (led_index != NO_LED) { + led_index_key_position[led_index] = (keypos_t){.row = row, .col = col}; + } + } + } +} + +void rgb_matrix_indicators_advanced_user(uint8_t led_min, uint8_t led_max) { + uint8_t current_layer = get_highest_layer(layer_state); + switch (current_layer) { + case MAC_BASE: + case WIN_BASE: +#ifdef CAPS_LOCK_INDICATOR_COLOR + if (host_keyboard_led_state().caps_lock) { + rgb_matrix_set_color_by_keycode(led_min, led_max, current_layer, is_caps_lock_indicator, CAPS_LOCK_INDICATOR_COLOR); + } +#endif + break; + case MAC_FN: + case WIN_FN: +#ifdef FN_LAYER_COLOR + if (get_fn_layer_color_enable()) { + rgb_matrix_set_color_by_keycode(led_min, led_max, current_layer, is_not_transparent, FN_LAYER_COLOR); + } +#endif + if (get_fn_layer_transparent_keys_off()) { + rgb_matrix_set_color_by_keycode(led_min, led_max, current_layer, is_transparent, RGB_OFF); + } + break; + } +} + +void rgb_matrix_set_color_by_keycode(uint8_t led_min, uint8_t led_max, uint8_t layer, bool (*is_keycode)(uint16_t), uint8_t red, uint8_t green, uint8_t blue) { + for (uint8_t i = led_min; i < led_max; i++) { + uint16_t keycode = keymap_key_to_keycode(layer, led_index_key_position[i]); + if ((*is_keycode)(keycode)) { + rgb_matrix_set_color(i, red, green, blue); + } + } +} + +bool is_caps_lock_indicator(uint16_t keycode) { + bool indicator = keycode == KC_CAPS; + + if (get_caps_lock_light_tab()) { + indicator = keycode == KC_TAB || keycode == KC_CAPS; + } + + if (get_caps_lock_light_alphas()) { + return (KC_A <= keycode && keycode <= KC_Z) || indicator; + } else { + return indicator; + } +} + +bool is_transparent(uint16_t keycode) { return keycode == KC_TRNS; } +bool is_not_transparent(uint16_t keycode) { return keycode != KC_TRNS; } \ No newline at end of file diff --git a/keyboards/keychron/q1/rev_0100/keymaps/mkillewald/rgb_matrix_user.h b/keyboards/keychron/q1/rev_0100/keymaps/mkillewald/rgb_matrix_user.h new file mode 100644 index 0000000000..1fb79c0b2a --- /dev/null +++ b/keyboards/keychron/q1/rev_0100/keymaps/mkillewald/rgb_matrix_user.h @@ -0,0 +1,26 @@ +/* Copyright 2021 @ Mike Killewald + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +void rgb_matrix_init_user(void); + +void rgb_matrix_set_color_by_keycode(uint8_t led_min, uint8_t led_max, uint8_t layer, bool (*is_keycode)(uint16_t), uint8_t red, uint8_t green, uint8_t blue); + +bool is_caps_lock_indicator(uint16_t keycode); +bool is_transparent(uint16_t keycode); +bool is_not_transparent(uint16_t keycode); + diff --git a/keyboards/keychron/q1/rev_0100/keymaps/mkillewald/rules.mk b/keyboards/keychron/q1/rev_0100/keymaps/mkillewald/rules.mk new file mode 100644 index 0000000000..af720e37ee --- /dev/null +++ b/keyboards/keychron/q1/rev_0100/keymaps/mkillewald/rules.mk @@ -0,0 +1,6 @@ +VIA_ENABLE = yes +MOUSEKEY_ENABLE = no + +ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes) + SRC += rgb_matrix_user.c +endif \ No newline at end of file diff --git a/keyboards/keychron/q1/rev_0102/keymaps/mkillewald_iso/config.h b/keyboards/keychron/q1/rev_0102/keymaps/mkillewald_iso/config.h new file mode 100644 index 0000000000..bc9fe405c3 --- /dev/null +++ b/keyboards/keychron/q1/rev_0102/keymaps/mkillewald_iso/config.h @@ -0,0 +1,23 @@ +/* Copyright 2021 @ Mike Killewald + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#ifdef RGB_MATRIX_ENABLE +# define RGB_DISABLE_WHEN_USB_SUSPENDED +# define CAPS_LOCK_INDICATOR_COLOR RGB_RED +# define FN_LAYER_COLOR RGB_ORANGE +#endif \ No newline at end of file diff --git a/keyboards/keychron/q1/rev_0102/keymaps/mkillewald_iso/keymap.c b/keyboards/keychron/q1/rev_0102/keymaps/mkillewald_iso/keymap.c new file mode 100644 index 0000000000..c62d065ef7 --- /dev/null +++ b/keyboards/keychron/q1/rev_0102/keymaps/mkillewald_iso/keymap.c @@ -0,0 +1,175 @@ +/* Copyright 2021 @ Mike Killewald + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H +#include "keymap_user.h" +#ifdef RGB_MATRIX_ENABLE +# include "rgb_matrix_user.h" +#endif + +// clang-format off + +typedef union { + uint32_t raw; + struct { + bool caps_lock_light_tab :1; + bool caps_lock_light_alphas :1; + bool fn_layer_transparent_keys_off :1; + bool fn_layer_color_enable :1; + }; +} user_config_t; + +user_config_t user_config; + +enum custom_keycodes { +#ifdef VIA_ENABLE + KC_MISSION_CONTROL = USER00, +#else + KC_MISSION_CONTROL = SAFE_RANGE, +#endif + KC_LAUNCHPAD, + KC_LIGHT_TAB_TOGGLE, + KC_LIGHT_ALPHAS_TOGGLE, + KC_FN_LAYER_TRANSPARENT_KEYS_TOGGLE, + KC_FN_LAYER_COLOR_TOGGLE +}; + +#define KC_MCTL KC_MISSION_CONTROL +#define KC_LPAD KC_LAUNCHPAD +#define KC_LTTOG KC_LIGHT_TAB_TOGGLE +#define KC_LATOG KC_LIGHT_ALPHAS_TOGGLE +#define KC_TKTOG KC_FN_LAYER_TRANSPARENT_KEYS_TOGGLE +#define KC_FCTOG KC_FN_LAYER_COLOR_TOGGLE +#define KC_TASK LGUI(KC_TAB) +#define KC_FLXP LGUI(KC_E) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +[MAC_BASE] = LAYOUT_iso_83( + KC_ESC, KC_BRID, KC_BRIU, KC_MCTL, KC_LPAD, RGB_VAD, RGB_VAI, KC_MPRV, KC_MPLY, KC_MNXT, KC_MUTE, KC_VOLD, KC_VOLU, KC_DEL, KC_INS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_HOME, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, MO(MAC_FN),KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + +[MAC_FN] = LAYOUT_iso_83( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + RGB_TOG, RGB_MOD, RGB_VAI, RGB_HUI, RGB_SAI, RGB_SPI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, RGB_RMOD, RGB_VAD, RGB_HUD, RGB_SAD, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_LTTOG, KC_LATOG, KC_TKTOG, KC_FCTOG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + +[WIN_BASE] = LAYOUT_iso_83( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_INS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_HOME, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(WIN_FN),KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + +[WIN_FN] = LAYOUT_iso_83( + KC_TRNS, KC_BRID, KC_BRIU, KC_TASK, KC_FLXP, RGB_VAD, RGB_VAI, KC_MPRV, KC_MPLY, KC_MNXT, KC_MUTE, KC_VOLD, KC_VOLU, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + RGB_TOG, RGB_MOD, RGB_VAI, RGB_HUI, RGB_SAI, RGB_SPI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, RGB_RMOD, RGB_VAD, RGB_HUD, RGB_SAD, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_LTTOG, KC_LATOG, KC_TKTOG, KC_FCTOG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) + +}; + +// clang-format on + +void matrix_init_user(void) { +#ifdef RGB_MATRIX_ENABLE + rgb_matrix_init_user(); +#endif +} + +void keyboard_post_init_user(void) { + user_config.raw = eeconfig_read_user(); +} + +void eeconfig_init_user(void) { + user_config.raw = 0; + user_config.caps_lock_light_tab = false; + user_config.caps_lock_light_alphas = false; + user_config.fn_layer_transparent_keys_off = true; + user_config.fn_layer_color_enable = false; + eeconfig_update_user(user_config.raw); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case KC_MISSION_CONTROL: + if (record->event.pressed) { + host_consumer_send(0x29F); + } else { + host_consumer_send(0); + } + return false; // Skip all further processing of this key + case KC_LAUNCHPAD: + if (record->event.pressed) { + host_consumer_send(0x2A0); + } else { + host_consumer_send(0); + } + return false; // Skip all further processing of this key + case KC_LIGHT_TAB_TOGGLE: + if (record->event.pressed) { + user_config.caps_lock_light_tab ^= 1; // bitwise xor to toggle status bit + eeconfig_update_user(user_config.raw); + } + return false; // Skip all further processing of this key + case KC_LIGHT_ALPHAS_TOGGLE: + if (record->event.pressed) { + user_config.caps_lock_light_alphas ^= 1; + eeconfig_update_user(user_config.raw); + } + return false; // Skip all further processing of this key + case KC_FN_LAYER_TRANSPARENT_KEYS_TOGGLE: + if (record->event.pressed) { + user_config.fn_layer_transparent_keys_off ^= 1; + eeconfig_update_user(user_config.raw); + } + return false; // Skip all further processing of this key + case KC_FN_LAYER_COLOR_TOGGLE: + if (record->event.pressed) { + user_config.fn_layer_color_enable ^= 1; + eeconfig_update_user(user_config.raw); + } + return false; // Skip all further processing of this key + default: + return true; // Process all other keycodes normally + } +} + +bool get_caps_lock_light_tab(void) { + return user_config.caps_lock_light_tab; +} + +bool get_caps_lock_light_alphas(void) { + return user_config.caps_lock_light_alphas; +} + +bool get_fn_layer_transparent_keys_off(void) { + return user_config.fn_layer_transparent_keys_off; +} + +bool get_fn_layer_color_enable(void) { + return user_config.fn_layer_color_enable; +} \ No newline at end of file diff --git a/keyboards/keychron/q1/rev_0102/keymaps/mkillewald_iso/keymap_user.h b/keyboards/keychron/q1/rev_0102/keymaps/mkillewald_iso/keymap_user.h new file mode 100644 index 0000000000..87b1baf47f --- /dev/null +++ b/keyboards/keychron/q1/rev_0102/keymaps/mkillewald_iso/keymap_user.h @@ -0,0 +1,33 @@ +/* Copyright 2021 @ Mike Killewald + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +// clang-format off + +enum layers { + MAC_BASE, + MAC_FN, + WIN_BASE, + WIN_FN +}; + +// clang-format on + +bool get_caps_lock_light_tab(void); +bool get_caps_lock_light_alphas(void); +bool get_fn_layer_transparent_keys_off(void); +bool get_fn_layer_color_enable(void); \ No newline at end of file diff --git a/keyboards/keychron/q1/rev_0102/keymaps/mkillewald_iso/readme.md b/keyboards/keychron/q1/rev_0102/keymaps/mkillewald_iso/readme.md new file mode 100644 index 0000000000..a6da9b3460 --- /dev/null +++ b/keyboards/keychron/q1/rev_0102/keymaps/mkillewald_iso/readme.md @@ -0,0 +1,54 @@ +## mkillewald's Keychron Q1 keymap (ISO rev_0102) v1.0.4 + +This keymap builds on the keymap by Grayson Carr (gtg465x) but adds a couple options. + +## Features: +- On macOS, F3 opens Mission Control and F4 opens Launchpad without needing to configure shortcuts in System Preferences +- RGB lighting turns off when the computer sleeps +- Caps Lock RGB indicator + - the Caps Lock key will light when Caps Lock is enabled with the following options: + - #define CAPS_LOCK_INDICATOR_COLOR [color] in config.h to set the backlight color used for the indicator when Caps Lock is enabled (default: red) + - Fn+Z will toggle lighting the TAB key when Caps Lock is enabled. This is useful with non backlit keycaps/legends. (default: off) + - Fn+X will toggle lighting all the alpha keys when Caps Lock is enabled. (default: off) + +- Dynamic Fn layer RGB indicator + - When the Fn key is held down, any keys defined on the Fn layer in this firmware or in VIA will be highlighted with the following options: + - #define FN_LAYER_COLOR [color] in config.h to set a static color for defined keys (default: orange) + - Fn+C will toggle turning off RGB for keys with no definition (default: RGB off) + - Fn+V will toggle lighting the defined Fn layer keys with the static color set with FN_LAYER_COLOR (default: static color off) + +- All custom keycodes can be moved to different keys in VIA by using the ANY key with the following keycodes: + - USER00 (default: F3) macOS Mission Control + - USER01 (default: F4) macOS Launchpad + - USER02 (default: Fn+Z) Caps Lock light Tab toggle + - USER03 (default: Fn+X) Caps Lock light alphas toggle + - USER04 (default: Fn+C) Fn layer non-defined keys RGB toggle + - USER05 (default: Fn+V) Fn layer defined keys static color toggle + +RGB must be toggled on for all indicators to function. If you do not want an RGB mode active but still want the indicators, toggle RGB on and turn the brightness all the way off. The indicators will remain at full brightness. + +Please make sure to save any customizations you have made in VIA to a .json file before flashing the firmware. Sometimes it has been necessary to re-apply those changes in VIA after flashing the firmware. If that is the case, you will most likely need to manually add the USER00 through USER05 custom keycodes after loading your customizations from the saved .json file. Then re-save a new .json file which will have your previous customizations and the custom keycodes for future use as needed. + +#### USE AT YOUR OWN RISK + +## Changelog: + +v1.0.4 October 9, 2021 +- Caps Lock and Fn layer toggles are now stored in eeprom so settings will remain when Q1 is unplugged + +v1.0.3 October 8, 2021 +- now using keycode toggles instead of preprocessor directives to set the various Caps Lock and Fn Layer RGB lighting options. This allows for setting the options from user space without having to recompile. + +v1.0.2 October 7, 2021 +- adapted Grayson Carr's (gtg465x) Caps Lock alphas and dynamic Fn layer RGB routines +- added CAPS_LOCK_INDICATOR_LIGHT_TAB config option to enable/disable lighting Tab with Caps Lock indicator +- added FN_LAYER_COLOR config option to set FN layer static color + +v1.0.1 October 7, 2021 +- Mission Control and Launchpad custom keycodes are now defined using the VIA user keycodes range so thay can be labeled properly in VIA (adopted change from gtg465x) + +v1.0.0 September 30, 2021 +- Initial release built upon keymap by Grayson Carr (gtg465x) +- defined Mission Control (F3) and Launchpad (F4) keycodes for macOs +- RGB backlight turns off when computer sleeps +- added Caps Lock indicator lighting both the Caps Lock and Tab LEDs for better effect on non-backlit keycaps diff --git a/keyboards/keychron/q1/rev_0102/keymaps/mkillewald_iso/rgb_matrix_user.c b/keyboards/keychron/q1/rev_0102/keymaps/mkillewald_iso/rgb_matrix_user.c new file mode 100644 index 0000000000..f06039af06 --- /dev/null +++ b/keyboards/keychron/q1/rev_0102/keymaps/mkillewald_iso/rgb_matrix_user.c @@ -0,0 +1,83 @@ +/* Copyright 2021 @ Mike Killewald + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H +#include "rgb_matrix_user.h" +#include "keymap_user.h" + +keypos_t led_index_key_position[DRIVER_LED_TOTAL]; + +void rgb_matrix_init_user(void) { + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + for (uint8_t col = 0; col < MATRIX_COLS; col++) { + uint8_t led_index = g_led_config.matrix_co[row][col]; + if (led_index != NO_LED) { + led_index_key_position[led_index] = (keypos_t){.row = row, .col = col}; + } + } + } +} + +void rgb_matrix_indicators_advanced_user(uint8_t led_min, uint8_t led_max) { + uint8_t current_layer = get_highest_layer(layer_state); + switch (current_layer) { + case MAC_BASE: + case WIN_BASE: +#ifdef CAPS_LOCK_INDICATOR_COLOR + if (host_keyboard_led_state().caps_lock) { + rgb_matrix_set_color_by_keycode(led_min, led_max, current_layer, is_caps_lock_indicator, CAPS_LOCK_INDICATOR_COLOR); + } +#endif + break; + case MAC_FN: + case WIN_FN: +#ifdef FN_LAYER_COLOR + if (get_fn_layer_color_enable()) { + rgb_matrix_set_color_by_keycode(led_min, led_max, current_layer, is_not_transparent, FN_LAYER_COLOR); + } +#endif + if (get_fn_layer_transparent_keys_off()) { + rgb_matrix_set_color_by_keycode(led_min, led_max, current_layer, is_transparent, RGB_OFF); + } + break; + } +} + +void rgb_matrix_set_color_by_keycode(uint8_t led_min, uint8_t led_max, uint8_t layer, bool (*is_keycode)(uint16_t), uint8_t red, uint8_t green, uint8_t blue) { + for (uint8_t i = led_min; i < led_max; i++) { + uint16_t keycode = keymap_key_to_keycode(layer, led_index_key_position[i]); + if ((*is_keycode)(keycode)) { + rgb_matrix_set_color(i, red, green, blue); + } + } +} + +bool is_caps_lock_indicator(uint16_t keycode) { + bool indicator = keycode == KC_CAPS; + + if (get_caps_lock_light_tab()) { + indicator = keycode == KC_TAB || keycode == KC_CAPS; + } + + if (get_caps_lock_light_alphas()) { + return (KC_A <= keycode && keycode <= KC_Z) || indicator; + } else { + return indicator; + } +} + +bool is_transparent(uint16_t keycode) { return keycode == KC_TRNS; } +bool is_not_transparent(uint16_t keycode) { return keycode != KC_TRNS; } \ No newline at end of file diff --git a/keyboards/keychron/q1/rev_0102/keymaps/mkillewald_iso/rgb_matrix_user.h b/keyboards/keychron/q1/rev_0102/keymaps/mkillewald_iso/rgb_matrix_user.h new file mode 100644 index 0000000000..1fb79c0b2a --- /dev/null +++ b/keyboards/keychron/q1/rev_0102/keymaps/mkillewald_iso/rgb_matrix_user.h @@ -0,0 +1,26 @@ +/* Copyright 2021 @ Mike Killewald + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +void rgb_matrix_init_user(void); + +void rgb_matrix_set_color_by_keycode(uint8_t led_min, uint8_t led_max, uint8_t layer, bool (*is_keycode)(uint16_t), uint8_t red, uint8_t green, uint8_t blue); + +bool is_caps_lock_indicator(uint16_t keycode); +bool is_transparent(uint16_t keycode); +bool is_not_transparent(uint16_t keycode); + diff --git a/keyboards/keychron/q1/rev_0102/keymaps/mkillewald_iso/rules.mk b/keyboards/keychron/q1/rev_0102/keymaps/mkillewald_iso/rules.mk new file mode 100644 index 0000000000..af720e37ee --- /dev/null +++ b/keyboards/keychron/q1/rev_0102/keymaps/mkillewald_iso/rules.mk @@ -0,0 +1,6 @@ +VIA_ENABLE = yes +MOUSEKEY_ENABLE = no + +ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes) + SRC += rgb_matrix_user.c +endif \ No newline at end of file From f529580860cf5a1de4afc10432f218a45daae17a Mon Sep 17 00:00:00 2001 From: Ryan Date: Thu, 4 Nov 2021 16:22:17 +1100 Subject: [PATCH 415/595] Basic keycode overhaul (#14726) --- docs/config_options.md | 2 +- docs/configurator_default_keymaps.md | 4 +- docs/faq_keymap.md | 12 +- docs/feature_auto_shift.md | 2 +- docs/feature_combo.md | 2 +- docs/feature_grave_esc.md | 2 +- docs/feature_haptic_feedback.md | 2 +- docs/feature_key_overrides.md | 6 +- docs/feature_macros.md | 2 +- docs/feature_tap_dance.md | 4 +- docs/feature_wpm.md | 2 +- docs/keycodes.md | 398 +++++------ docs/keycodes_basic.md | 200 +++--- docs/keymap.md | 4 +- docs/reference_configurator_support.md | 2 +- docs/tap_hold.md | 4 +- docs/understanding_qmk.md | 25 +- .../default/60_hhkb/default_60_hhkb/keymap.c | 2 +- .../default/64_ansi/default_64_ansi/keymap.c | 2 +- .../default/64_iso/default_64_iso/keymap.c | 2 +- .../default/96_ansi/default_96_ansi/keymap.c | 4 +- .../default/96_iso/default_96_iso/keymap.c | 4 +- .../default_fullsize_ansi/keymap.c | 4 +- .../default_fullsize_iso/keymap.c | 4 +- .../numpad_6x4/default_numpad_6x4/keymap.c | 2 +- .../numpad_6x5/default_numpad_6x5/keymap.c | 12 +- .../ortho_6x4/default_ortho_6x4/keymap.c | 2 +- .../tkl_ansi/default_tkl_ansi/keymap.c | 2 +- .../default/tkl_iso/default_tkl_iso/keymap.c | 2 +- quantum/action.c | 52 +- quantum/keycode.h | 272 +++---- quantum/keycode_config.c | 66 +- quantum/keycode_legacy.h | 53 ++ quantum/keymap_common.c | 4 +- quantum/keymap_extras/keymap_korean.h | 4 +- quantum/process_keycode/process_auto_shift.c | 16 +- quantum/process_keycode/process_haptic.c | 26 +- quantum/process_keycode/process_music.c | 6 +- quantum/process_keycode/process_printer.c | 32 +- quantum/process_keycode/process_printer_bb.c | 32 +- quantum/process_keycode/process_space_cadet.c | 24 +- quantum/process_keycode/process_terminal.c | 10 +- quantum/process_keycode/process_ucis.c | 18 +- .../process_keycode/process_unicode_common.c | 18 +- .../process_keycode/process_unicode_common.h | 4 +- quantum/quantum.c | 16 +- quantum/quantum_keycodes.h | 82 ++- quantum/via_ensure_keycode.h | 670 +++++++++--------- quantum/wpm.c | 2 +- tests/basic/test_keypress.cpp | 72 +- tests/basic/test_macro.cpp | 18 +- tests/basic/test_tapping.cpp | 4 +- 52 files changed, 1135 insertions(+), 1081 deletions(-) create mode 100644 quantum/keycode_legacy.h diff --git a/docs/config_options.md b/docs/config_options.md index cfbe39f0d3..c4e5afb56b 100644 --- a/docs/config_options.md +++ b/docs/config_options.md @@ -206,7 +206,7 @@ If you define these options you will enable the associated feature, which may in * `#define TAP_CODE_DELAY 100` * Sets the delay between `register_code` and `unregister_code`, if you're having issues with it registering properly (common on VUSB boards). The value is in milliseconds. * `#define TAP_HOLD_CAPS_DELAY 80` - * Sets the delay for Tap Hold keys (`LT`, `MT`) when using `KC_CAPSLOCK` keycode, as this has some special handling on MacOS. The value is in milliseconds, and defaults to 80 ms if not defined. For macOS, you may want to set this to 200 or higher. + * Sets the delay for Tap Hold keys (`LT`, `MT`) when using `KC_CAPS_LOCK` keycode, as this has some special handling on MacOS. The value is in milliseconds, and defaults to 80 ms if not defined. For macOS, you may want to set this to 200 or higher. * `#define KEY_OVERRIDE_REPEAT_DELAY 500` * Sets the key repeat interval for [key overrides](feature_key_overrides.md). diff --git a/docs/configurator_default_keymaps.md b/docs/configurator_default_keymaps.md index c52342cf16..d2b14ec411 100644 --- a/docs/configurator_default_keymaps.md +++ b/docs/configurator_default_keymaps.md @@ -46,7 +46,7 @@ Now that we have the commit hash, we need the keymap (edited for readability): const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_all( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SCRL, KC_PAUS, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, @@ -74,7 +74,7 @@ The default keymap uses the `LAYOUT_all` macro, so that will be the value of the "layout": "LAYOUT_all", "layers": [ [ - "KC_ESC", "KC_F1", "KC_F2", "KC_F3", "KC_F4", "KC_F5", "KC_F6", "KC_F7", "KC_F8", "KC_F9", "KC_F10", "KC_F11", "KC_F12", "KC_PSCR", "KC_SLCK", "KC_PAUS", + "KC_ESC", "KC_F1", "KC_F2", "KC_F3", "KC_F4", "KC_F5", "KC_F6", "KC_F7", "KC_F8", "KC_F9", "KC_F10", "KC_F11", "KC_F12", "KC_PSCR", "KC_SCRL", "KC_PAUS", "KC_GRV", "KC_1", "KC_2", "KC_3", "KC_4", "KC_5", "KC_6", "KC_7", "KC_8", "KC_9", "KC_0", "KC_MINS", "KC_EQL", "KC_BSPC", "KC_BSPC", "KC_INS", "KC_HOME", "KC_PGUP", "KC_TAB", "KC_Q", "KC_W", "KC_E", "KC_R", "KC_T", "KC_Y", "KC_U", "KC_I", "KC_O", "KC_P", "KC_LBRC", "KC_RBRC", "KC_BSLS", "KC_DEL", "KC_END", "KC_PGDN", "KC_CAPS", "KC_A", "KC_S", "KC_D", "KC_F", "KC_G", "KC_H", "KC_J", "KC_K", "KC_L", "KC_SCLN", "KC_QUOT", "KC_NUHS", "KC_ENT", diff --git a/docs/faq_keymap.md b/docs/faq_keymap.md index dbeadba710..01ded4f231 100644 --- a/docs/faq_keymap.md +++ b/docs/faq_keymap.md @@ -19,7 +19,7 @@ There are 3 standard keyboard layouts in use around the world- ANSI, ISO, and JI Sometimes, for readability's sake, it's useful to define custom names for some keycodes. People often define custom names using `#define`. For example: ```c -#define FN_CAPS LT(_FL, KC_CAPSLOCK) +#define FN_CAPS LT(_FL, KC_CAPS) #define ALT_TAB LALT(KC_TAB) ``` @@ -38,8 +38,8 @@ As a quick fix try holding down `Space`+`Backspace` while you plug in your keybo The key found on most modern keyboards that is located between `KC_RGUI` and `KC_RCTL` is actually called `KC_APP`. This is because when that key was invented there was already a key named `MENU` in the relevant standards, so MS chose to call that the `APP` key. -## `KC_SYSREQ` Isn't Working -Use keycode for Print Screen(`KC_PSCREEN` or `KC_PSCR`) instead of `KC_SYSREQ`. Key combination of 'Alt + Print Screen' is recognized as 'System request'. +## `KC_SYSTEM_REQUEST` Isn't Working +Use keycode for Print Screen (`KC_PRINT_SCREEN`/`KC_PSCR`) instead of `KC_SYSTEM_REQUEST`. Key combination of 'Alt + Print Screen' is recognized as 'System request'. See [issue #168](https://github.com/tmk/tmk_keyboard/issues/168) and * https://en.wikipedia.org/wiki/Magic_SysRq_key @@ -47,7 +47,7 @@ See [issue #168](https://github.com/tmk/tmk_keyboard/issues/168) and ## Power Keys Aren't Working -Somewhat confusingly, there are two "Power" keycodes in QMK: `KC_POWER` in the Keyboard/Keypad HID usage page, and `KC_SYSTEM_POWER` (or `KC_PWR`) in the Consumer page. +Somewhat confusingly, there are two "Power" keycodes in QMK: `KC_KB_POWER` in the Keyboard/Keypad HID usage page, and `KC_SYSTEM_POWER` (or `KC_PWR`) in the Consumer page. The former is only recognized on macOS, while the latter, `KC_SLEP` and `KC_WAKE` are supported by all three major operating systems, so it is recommended to use those instead. Under Windows, these keys take effect immediately, however on macOS they must be held down until a dialog appears. @@ -57,7 +57,7 @@ https://github.com/tmk/tmk_keyboard/issues/67 ## Modifier/Layer Stuck Modifier keys or layers can be stuck unless layer switching is configured properly. -For Modifier keys and layer actions you have to place `KC_TRANS` on same position of destination layer to unregister the modifier key or return to previous layer on release event. +For Modifier keys and layer actions you have to place `KC_TRNS` on same position of destination layer to unregister the modifier key or return to previous layer on release event. * https://github.com/tmk/tmk_core/blob/master/doc/keymap.md#31-momentary-switching * https://geekhack.org/index.php?topic=57008.msg1492604#msg1492604 @@ -75,7 +75,7 @@ This feature is for *mechanical lock switch* like [this Alps one](https://deskth After enabling this feature use keycodes `KC_LCAP`, `KC_LNUM` and `KC_LSCR` in your keymap instead. -Old vintage mechanical keyboards occasionally have lock switches but modern ones don't have. ***You don't need this feature in most case and just use keycodes `KC_CAPS`, `KC_NLCK` and `KC_SLCK`.*** +Old vintage mechanical keyboards occasionally have lock switches but modern ones don't have. ***You don't need this feature in most case and just use keycodes `KC_CAPS`, `KC_NUM` and `KC_SCRL`.*** ## Input Special Characters Other Than ASCII like Cédille 'Ç' diff --git a/docs/feature_auto_shift.md b/docs/feature_auto_shift.md index ec7eeaaa0c..a54cd79e42 100644 --- a/docs/feature_auto_shift.md +++ b/docs/feature_auto_shift.md @@ -127,7 +127,7 @@ bool get_auto_shifted_key(uint16_t keycode, keyrecord_t *record) { # ifndef NO_AUTO_SHIFT_SPECIAL case KC_TAB: case KC_MINUS ... KC_SLASH: - case KC_NONUS_BSLASH: + case KC_NONUS_BACKSLASH: # endif return true; } diff --git a/docs/feature_combo.md b/docs/feature_combo.md index d98e6f2ac7..b5c22badec 100644 --- a/docs/feature_combo.md +++ b/docs/feature_combo.md @@ -173,7 +173,7 @@ uint16_t get_combo_term(uint16_t index, combo_t *combo) { // i.e. the exact array of keys you defined for the combo. // This can be useful if your combos have a common key and you want to apply the // same combo term for all of them. - if (combo->keys[0] == KC_ENTER) { // if first key in the array is KC_ENTER + if (combo->keys[0] == KC_ENT) { // if first key in the array is Enter return 150; } diff --git a/docs/feature_grave_esc.md b/docs/feature_grave_esc.md index f57c6042ca..f135b1dede 100644 --- a/docs/feature_grave_esc.md +++ b/docs/feature_grave_esc.md @@ -4,7 +4,7 @@ If you're using a 60% keyboard, or any other layout with no F-row, you will have ## Usage -Replace the `KC_GRAVE` key in your keymap (usually to the left of the `1` key) with `KC_GESC`. Most of the time this key will output `KC_ESC` when pressed. However, when Shift or GUI are held down it will output `KC_GRV` instead. +Replace the `KC_GRV` key in your keymap (usually to the left of the `1` key) with `KC_GESC`. Most of the time this key will output `KC_ESC` when pressed. However, when Shift or GUI are held down it will output `KC_GRV` instead. ## What Your OS Sees diff --git a/docs/feature_haptic_feedback.md b/docs/feature_haptic_feedback.md index 159296a297..c8c74cb8f0 100644 --- a/docs/feature_haptic_feedback.md +++ b/docs/feature_haptic_feedback.md @@ -184,7 +184,7 @@ The Haptic Exclusion is implemented as `__attribute__((weak)) bool get_haptic_en ### NO_HAPTIC_MOD With the entry of `#define NO_HAPTIC_MOD` in config.h, the following keys will not trigger feedback: -* Usual modifier keys such as Control/Shift/Alt/Gui (For example `KC_LCTRL`) +* Usual modifier keys such as Control/Shift/Alt/Gui (For example `KC_LCTL`) * `MO()` momentary keys. See also [Layers](feature_layers.md). * `LM()` momentary keys with mod active. * `LT()` layer tap keys, when held to activate a layer. However when tapped, and the key is quickly released, and sends a keycode, haptic feedback is still triggered. diff --git a/docs/feature_key_overrides.md b/docs/feature_key_overrides.md index 98036241e3..2417fcf594 100644 --- a/docs/feature_key_overrides.md +++ b/docs/feature_key_overrides.md @@ -39,7 +39,7 @@ For more customization possibilities, you may directly create a `key_override_t` This shows how the mentioned example of sending `delete` when `shift` + `backspace` are pressed is realized: ```c -const key_override_t delete_key_override = ko_make_basic(MOD_MASK_SHIFT, KC_BSPACE, KC_DELETE); +const key_override_t delete_key_override = ko_make_basic(MOD_MASK_SHIFT, KC_BSPC, KC_DEL); // This globally defines all key overrides to be used const key_override_t **key_overrides = (const key_override_t *[]){ @@ -107,10 +107,10 @@ The [Grave Escape feature](feature_grave_esc.md) is limited in its configurabili ```c // Shift + esc = ~ -const key_override_t tilde_esc_override = ko_make_basic(MOD_MASK_SHIFT, KC_ESC, S(KC_GRAVE)); +const key_override_t tilde_esc_override = ko_make_basic(MOD_MASK_SHIFT, KC_ESC, S(KC_GRV)); // GUI + esc = ` -const key_override_t grave_esc_override = ko_make_basic(MOD_MASK_GUI, KC_ESC, KC_GRAVE); +const key_override_t grave_esc_override = ko_make_basic(MOD_MASK_GUI, KC_ESC, KC_GRV); const key_override_t **key_overrides = (const key_override_t *[]){ &tilde_esc_override, diff --git a/docs/feature_macros.md b/docs/feature_macros.md index 3660f37755..6807111ca2 100644 --- a/docs/feature_macros.md +++ b/docs/feature_macros.md @@ -118,7 +118,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { void post_process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { case KC_A ... KC_F21: //notice how it skips over F22 - case KC_F23 ... KC_EXSEL: //exsel is the last one before the modifier keys + case KC_F23 ... KC_EXSL: //exsel is the last one before the modifier keys if (!record->event.pressed) { f22_tracker--; if (!f22_tracker) { diff --git a/docs/feature_tap_dance.md b/docs/feature_tap_dance.md index d1988b9b7d..40f9802db3 100644 --- a/docs/feature_tap_dance.md +++ b/docs/feature_tap_dance.md @@ -299,7 +299,7 @@ void x_finished(qk_tap_dance_state_t *state, void *user_data) { xtap_state.state = cur_dance(state); switch (xtap_state.state) { case TD_SINGLE_TAP: register_code(KC_X); break; - case TD_SINGLE_HOLD: register_code(KC_LCTRL); break; + case TD_SINGLE_HOLD: register_code(KC_LCTL); break; case TD_DOUBLE_TAP: register_code(KC_ESC); break; case TD_DOUBLE_HOLD: register_code(KC_LALT); break; // Last case is for fast typing. Assuming your key is `f`: @@ -312,7 +312,7 @@ void x_finished(qk_tap_dance_state_t *state, void *user_data) { void x_reset(qk_tap_dance_state_t *state, void *user_data) { switch (xtap_state.state) { case TD_SINGLE_TAP: unregister_code(KC_X); break; - case TD_SINGLE_HOLD: unregister_code(KC_LCTRL); break; + case TD_SINGLE_HOLD: unregister_code(KC_LCTL); break; case TD_DOUBLE_TAP: unregister_code(KC_ESC); break; case TD_DOUBLE_HOLD: unregister_code(KC_LALT); case TD_DOUBLE_SINGLE_TAP: unregister_code(KC_X); diff --git a/docs/feature_wpm.md b/docs/feature_wpm.md index e2fac1ecea..7e465e79b9 100644 --- a/docs/feature_wpm.md +++ b/docs/feature_wpm.md @@ -35,7 +35,7 @@ bool wpm_keycode_user(uint16_t keycode) { } else if (keycode > 0xFF) { keycode = 0; } - if ((keycode >= KC_A && keycode <= KC_0) || (keycode >= KC_TAB && keycode <= KC_SLASH)) { + if ((keycode >= KC_A && keycode <= KC_0) || (keycode >= KC_TAB && keycode <= KC_SLSH)) { return true; } diff --git a/docs/keycodes.md b/docs/keycodes.md index 8aba3a5129..926d4fdcef 100644 --- a/docs/keycodes.md +++ b/docs/keycodes.md @@ -8,205 +8,205 @@ This is a reference only. Each group of keys links to the page documenting their See also: [Basic Keycodes](keycodes_basic.md) -|Key |Aliases |Description |Windows |macOS |Linux1| -|-----------------------|------------------------------|-----------------------------------------------|-------------|-------------|-----------------| -|`KC_NO` |`XXXXXXX` |Ignore this key (NOOP) |*N/A* |*N/A* |*N/A* | -|`KC_TRANSPARENT` |`KC_TRNS`, `_______` |Use the next lowest non-transparent key |*N/A* |*N/A* |*N/A* | -|`KC_A` | |`a` and `A` |✔ |✔ |✔ | -|`KC_B` | |`b` and `B` |✔ |✔ |✔ | -|`KC_C` | |`c` and `C` |✔ |✔ |✔ | -|`KC_D` | |`d` and `D` |✔ |✔ |✔ | -|`KC_E` | |`e` and `E` |✔ |✔ |✔ | -|`KC_F` | |`f` and `F` |✔ |✔ |✔ | -|`KC_G` | |`g` and `G` |✔ |✔ |✔ | -|`KC_H` | |`h` and `H` |✔ |✔ |✔ | -|`KC_I` | |`i` and `I` |✔ |✔ |✔ | -|`KC_J` | |`j` and `J` |✔ |✔ |✔ | -|`KC_K` | |`k` and `K` |✔ |✔ |✔ | -|`KC_L` | |`l` and `L` |✔ |✔ |✔ | -|`KC_M` | |`m` and `M` |✔ |✔ |✔ | -|`KC_N` | |`n` and `N` |✔ |✔ |✔ | -|`KC_O` | |`o` and `O` |✔ |✔ |✔ | -|`KC_P` | |`p` and `P` |✔ |✔ |✔ | -|`KC_Q` | |`q` and `Q` |✔ |✔ |✔ | -|`KC_R` | |`r` and `R` |✔ |✔ |✔ | -|`KC_S` | |`s` and `S` |✔ |✔ |✔ | -|`KC_T` | |`t` and `T` |✔ |✔ |✔ | -|`KC_U` | |`u` and `U` |✔ |✔ |✔ | -|`KC_V` | |`v` and `V` |✔ |✔ |✔ | -|`KC_W` | |`w` and `W` |✔ |✔ |✔ | -|`KC_X` | |`x` and `X` |✔ |✔ |✔ | -|`KC_Y` | |`y` and `Y` |✔ |✔ |✔ | -|`KC_Z` | |`z` and `Z` |✔ |✔ |✔ | -|`KC_1` | |`1` and `!` |✔ |✔ |✔ | -|`KC_2` | |`2` and `@` |✔ |✔ |✔ | -|`KC_3` | |`3` and `#` |✔ |✔ |✔ | -|`KC_4` | |`4` and `$` |✔ |✔ |✔ | -|`KC_5` | |`5` and `%` |✔ |✔ |✔ | -|`KC_6` | |`6` and `^` |✔ |✔ |✔ | -|`KC_7` | |`7` and `&` |✔ |✔ |✔ | -|`KC_8` | |`8` and `*` |✔ |✔ |✔ | -|`KC_9` | |`9` and `(` |✔ |✔ |✔ | -|`KC_0` | |`0` and `)` |✔ |✔ |✔ | -|`KC_ENTER` |`KC_ENT` |Return (Enter) |✔ |✔ |✔ | -|`KC_ESCAPE` |`KC_ESC` |Escape |✔ |✔ |✔ | -|`KC_BSPACE` |`KC_BSPC` |Delete (Backspace) |✔ |✔ |✔ | -|`KC_TAB` | |Tab |✔ |✔ |✔ | -|`KC_SPACE` |`KC_SPC` |Spacebar |✔ |✔ |✔ | -|`KC_MINUS` |`KC_MINS` |`-` and `_` |✔ |✔ |✔ | -|`KC_EQUAL` |`KC_EQL` |`=` and `+` |✔ |✔ |✔ | -|`KC_LBRACKET` |`KC_LBRC` |`[` and `{` |✔ |✔ |✔ | -|`KC_RBRACKET` |`KC_RBRC` |`]` and `}` |✔ |✔ |✔ | -|`KC_BSLASH` |`KC_BSLS` |`\` and `\|` |✔ |✔ |✔ | -|`KC_NONUS_HASH` |`KC_NUHS` |Non-US `#` and `~` |✔ |✔ |✔ | -|`KC_SCOLON` |`KC_SCLN` |`;` and `:` |✔ |✔ |✔ | -|`KC_QUOTE` |`KC_QUOT` |`'` and `"` |✔ |✔ |✔ | -|`KC_GRAVE` |`KC_GRV`, `KC_ZKHK` |` and `~`, JIS Zenkaku/Hankaku|✔ |✔ |✔ | -|`KC_COMMA` |`KC_COMM` |`,` and `<` |✔ |✔ |✔ | -|`KC_DOT` | |`.` and `>` |✔ |✔ |✔ | -|`KC_SLASH` |`KC_SLSH` |`/` and `?` |✔ |✔ |✔ | -|`KC_CAPSLOCK` |`KC_CLCK`, `KC_CAPS` |Caps Lock |✔ |✔ |✔ | -|`KC_F1` | |F1 |✔ |✔ |✔ | -|`KC_F2` | |F2 |✔ |✔ |✔ | -|`KC_F3` | |F3 |✔ |✔ |✔ | -|`KC_F4` | |F4 |✔ |✔ |✔ | -|`KC_F5` | |F5 |✔ |✔ |✔ | -|`KC_F6` | |F6 |✔ |✔ |✔ | -|`KC_F7` | |F7 |✔ |✔ |✔ | -|`KC_F8` | |F8 |✔ |✔ |✔ | -|`KC_F9` | |F9 |✔ |✔ |✔ | -|`KC_F10` | |F10 |✔ |✔ |✔ | -|`KC_F11` | |F11 |✔ |✔ |✔ | -|`KC_F12` | |F12 |✔ |✔ |✔ | -|`KC_PSCREEN` |`KC_PSCR` |Print Screen |✔ |✔2|✔ | -|`KC_SCROLLLOCK` |`KC_SLCK`, `KC_BRMD` |Scroll Lock, Brightness Down (macOS) |✔ |✔2|✔ | -|`KC_PAUSE` |`KC_PAUS`, `KC_BRK`, `KC_BRMU`|Pause, Brightness Up (macOS) |✔ |✔2|✔ | -|`KC_INSERT` |`KC_INS` |Insert |✔ | |✔ | -|`KC_HOME` | |Home |✔ |✔ |✔ | -|`KC_PGUP` | |Page Up |✔ |✔ |✔ | -|`KC_DELETE` |`KC_DEL` |Forward Delete |✔ |✔ |✔ | -|`KC_END` | |End |✔ |✔ |✔ | -|`KC_PGDOWN` |`KC_PGDN` |Page Down |✔ |✔ |✔ | -|`KC_RIGHT` |`KC_RGHT` |Right Arrow |✔ |✔ |✔ | -|`KC_LEFT` | |Left Arrow |✔ |✔ |✔ | -|`KC_DOWN` | |Down Arrow |✔ |✔ |✔ | -|`KC_UP` | |Up Arrow |✔ |✔ |✔ | -|`KC_NUMLOCK` |`KC_NLCK` |Keypad Num Lock and Clear |✔ |✔ |✔ | -|`KC_KP_SLASH` |`KC_PSLS` |Keypad `/` |✔ |✔ |✔ | -|`KC_KP_ASTERISK` |`KC_PAST` |Keypad `*` |✔ |✔ |✔ | -|`KC_KP_MINUS` |`KC_PMNS` |Keypad `-` |✔ |✔ |✔ | -|`KC_KP_PLUS` |`KC_PPLS` |Keypad `+` |✔ |✔ |✔ | -|`KC_KP_ENTER` |`KC_PENT` |Keypad Enter |✔ |✔ |✔ | -|`KC_KP_1` |`KC_P1` |Keypad `1` and End |✔ |✔ |✔ | -|`KC_KP_2` |`KC_P2` |Keypad `2` and Down Arrow |✔ |✔ |✔ | -|`KC_KP_3` |`KC_P3` |Keypad `3` and Page Down |✔ |✔ |✔ | -|`KC_KP_4` |`KC_P4` |Keypad `4` and Left Arrow |✔ |✔ |✔ | -|`KC_KP_5` |`KC_P5` |Keypad `5` |✔ |✔ |✔ | -|`KC_KP_6` |`KC_P6` |Keypad `6` and Right Arrow |✔ |✔ |✔ | -|`KC_KP_7` |`KC_P7` |Keypad `7` and Home |✔ |✔ |✔ | -|`KC_KP_8` |`KC_P8` |Keypad `8` and Up Arrow |✔ |✔ |✔ | -|`KC_KP_9` |`KC_P9` |Keypad `9` and Page Up |✔ |✔ |✔ | -|`KC_KP_0` |`KC_P0` |Keypad `0` and Insert |✔ |✔ |✔ | -|`KC_KP_DOT` |`KC_PDOT` |Keypad `.` and Delete |✔ |✔ |✔ | -|`KC_NONUS_BSLASH` |`KC_NUBS` |Non-US `\` and `\|` |✔ |✔ |✔ | -|`KC_APPLICATION` |`KC_APP` |Application (Windows Context Menu Key) |✔ | |✔ | -|`KC_POWER` | |System Power | |✔3|✔ | -|`KC_KP_EQUAL` |`KC_PEQL` |Keypad `=` |✔ |✔ |✔ | -|`KC_F13` | |F13 |✔ |✔ |✔ | -|`KC_F14` | |F14 |✔ |✔ |✔ | -|`KC_F15` | |F15 |✔ |✔ |✔ | -|`KC_F16` | |F16 |✔ |✔ |✔ | -|`KC_F17` | |F17 |✔ |✔ |✔ | -|`KC_F18` | |F18 |✔ |✔ |✔ | -|`KC_F19` | |F19 |✔ |✔ |✔ | -|`KC_F20` | |F20 |✔ | |✔ | -|`KC_F21` | |F21 |✔ | |✔ | -|`KC_F22` | |F22 |✔ | |✔ | -|`KC_F23` | |F23 |✔ | |✔ | -|`KC_F24` | |F24 |✔ | |✔ | -|`KC_EXECUTE` |`KC_EXEC` |Execute | | |✔ | -|`KC_HELP` | |Help | | |✔ | -|`KC_MENU` | |Menu | | |✔ | -|`KC_SELECT` |`KC_SLCT` |Select | | |✔ | -|`KC_STOP` | |Stop | | |✔ | -|`KC_AGAIN` |`KC_AGIN` |Again | | |✔ | -|`KC_UNDO` | |Undo | | |✔ | -|`KC_CUT` | |Cut | | |✔ | -|`KC_COPY` | |Copy | | |✔ | -|`KC_PASTE` |`KC_PSTE` |Paste | | |✔ | -|`KC_FIND` | |Find | | |✔ | -|`KC__MUTE` | |Mute | |✔ |✔ | -|`KC__VOLUP` | |Volume Up | |✔ |✔ | -|`KC__VOLDOWN` | |Volume Down | |✔ |✔ | -|`KC_LOCKING_CAPS` |`KC_LCAP` |Locking Caps Lock |✔ |✔ | | -|`KC_LOCKING_NUM` |`KC_LNUM` |Locking Num Lock |✔ |✔ | | -|`KC_LOCKING_SCROLL` |`KC_LSCR` |Locking Scroll Lock |✔ |✔ | | -|`KC_KP_COMMA` |`KC_PCMM` |Keypad `,` | | |✔ | -|`KC_KP_EQUAL_AS400` | |Keypad `=` on AS/400 keyboards | | | | -|`KC_INT1` |`KC_RO` |JIS `\` and `_` |✔ | |✔ | -|`KC_INT2` |`KC_KANA` |JIS Katakana/Hiragana |✔ | |✔ | -|`KC_INT3` |`KC_JYEN` |JIS `¥` and `\|` |✔ | |✔ | -|`KC_INT4` |`KC_HENK` |JIS Henkan |✔ | |✔ | -|`KC_INT5` |`KC_MHEN` |JIS Muhenkan |✔ | |✔ | -|`KC_INT6` | |JIS Numpad `,` | | |✔ | -|`KC_INT7` | |International 7 | | | | -|`KC_INT8` | |International 8 | | | | -|`KC_INT9` | |International 9 | | | | -|`KC_LANG1` |`KC_HAEN` |Hangul/English | | |✔ | -|`KC_LANG2` |`KC_HANJ` |Hanja | | |✔ | -|`KC_LANG3` | |JIS Katakana | | |✔ | -|`KC_LANG4` | |JIS Hiragana | | |✔ | -|`KC_LANG5` | |JIS Zenkaku/Hankaku | | |✔ | -|`KC_LANG6` | |Language 6 | | | | -|`KC_LANG7` | |Language 7 | | | | -|`KC_LANG8` | |Language 8 | | | | -|`KC_LANG9` | |Language 9 | | | | -|`KC_ALT_ERASE` |`KC_ERAS` |Alternate Erase | | | | -|`KC_SYSREQ` | |SysReq/Attention | | | | -|`KC_CANCEL` | |Cancel | | | | -|`KC_CLEAR` |`KC_CLR` |Clear | | |✔ | -|`KC_PRIOR` | |Prior | | | | -|`KC_RETURN` | |Return | | | | -|`KC_SEPARATOR` | |Separator | | | | -|`KC_OUT` | |Out | | | | -|`KC_OPER` | |Oper | | | | -|`KC_CLEAR_AGAIN` | |Clear/Again | | | | -|`KC_CRSEL` | |CrSel/Props | | | | -|`KC_EXSEL` | |ExSel | | | | -|`KC_LCTRL` |`KC_LCTL` |Left Control |✔ |✔ |✔ | -|`KC_LSHIFT` |`KC_LSFT` |Left Shift |✔ |✔ |✔ | -|`KC_LALT` |`KC_LOPT` |Left Alt (Option) |✔ |✔ |✔ | -|`KC_LGUI` |`KC_LCMD`, `KC_LWIN` |Left GUI (Windows/Command/Meta key) |✔ |✔ |✔ | -|`KC_RCTRL` |`KC_RCTL` |Right Control |✔ |✔ |✔ | -|`KC_RSHIFT` |`KC_RSFT` |Right Shift |✔ |✔ |✔ | -|`KC_RALT` |`KC_ROPT`, `KC_ALGR` |Right Alt (Option/AltGr) |✔ |✔ |✔ | -|`KC_RGUI` |`KC_RCMD`, `KC_RWIN` |Right GUI (Windows/Command/Meta key) |✔ |✔ |✔ | -|`KC_SYSTEM_POWER` |`KC_PWR` |System Power Down |✔ |✔3|✔ | -|`KC_SYSTEM_SLEEP` |`KC_SLEP` |System Sleep |✔ |✔3|✔ | -|`KC_SYSTEM_WAKE` |`KC_WAKE` |System Wake | |✔3|✔ | -|`KC_AUDIO_MUTE` |`KC_MUTE` |Mute |✔ |✔ |✔ | -|`KC_AUDIO_VOL_UP` |`KC_VOLU` |Volume Up |✔ |✔4|✔ | -|`KC_AUDIO_VOL_DOWN` |`KC_VOLD` |Volume Down |✔ |✔4|✔ | -|`KC_MEDIA_NEXT_TRACK` |`KC_MNXT` |Next Track |✔ |✔5|✔ | -|`KC_MEDIA_PREV_TRACK` |`KC_MPRV` |Previous Track |✔ |✔5|✔ | -|`KC_MEDIA_STOP` |`KC_MSTP` |Stop Track |✔ | |✔ | -|`KC_MEDIA_PLAY_PAUSE` |`KC_MPLY` |Play/Pause Track |✔ |✔ |✔ | -|`KC_MEDIA_SELECT` |`KC_MSEL` |Launch Media Player |✔ | |✔ | -|`KC_MEDIA_EJECT` |`KC_EJCT` |Eject | |✔ |✔ | -|`KC_MAIL` | |Launch Mail |✔ | |✔ | -|`KC_CALCULATOR` |`KC_CALC` |Launch Calculator |✔ | |✔ | -|`KC_MY_COMPUTER` |`KC_MYCM` |Launch My Computer |✔ | |✔ | -|`KC_WWW_SEARCH` |`KC_WSCH` |Browser Search |✔ | |✔ | -|`KC_WWW_HOME` |`KC_WHOM` |Browser Home |✔ | |✔ | -|`KC_WWW_BACK` |`KC_WBAK` |Browser Back |✔ | |✔ | -|`KC_WWW_FORWARD` |`KC_WFWD` |Browser Forward |✔ | |✔ | -|`KC_WWW_STOP` |`KC_WSTP` |Browser Stop |✔ | |✔ | -|`KC_WWW_REFRESH` |`KC_WREF` |Browser Refresh |✔ | |✔ | -|`KC_WWW_FAVORITES` |`KC_WFAV` |Browser Favorites |✔ | |✔ | -|`KC_MEDIA_FAST_FORWARD`|`KC_MFFD` |Next Track |✔ |✔5|✔ | -|`KC_MEDIA_REWIND` |`KC_MRWD` |Previous Track |✔6|✔5|✔ | -|`KC_BRIGHTNESS_UP` |`KC_BRIU` |Brightness Up |✔ |✔ |✔ | -|`KC_BRIGHTNESS_DOWN` |`KC_BRID` |Brightness Down |✔ |✔ |✔ | +|Key |Aliases |Description |Windows |macOS |Linux1| +|------------------------|-------------------------------|---------------------------------------|-------------|-------------|-----------------| +|`KC_NO` |`XXXXXXX` |Ignore this key (NOOP) |*N/A* |*N/A* |*N/A* | +|`KC_TRANSPARENT` |`KC_TRNS`, `_______` |Use the next lowest non-transparent key|*N/A* |*N/A* |*N/A* | +|`KC_A` | |`a` and `A` |✔ |✔ |✔ | +|`KC_B` | |`b` and `B` |✔ |✔ |✔ | +|`KC_C` | |`c` and `C` |✔ |✔ |✔ | +|`KC_D` | |`d` and `D` |✔ |✔ |✔ | +|`KC_E` | |`e` and `E` |✔ |✔ |✔ | +|`KC_F` | |`f` and `F` |✔ |✔ |✔ | +|`KC_G` | |`g` and `G` |✔ |✔ |✔ | +|`KC_H` | |`h` and `H` |✔ |✔ |✔ | +|`KC_I` | |`i` and `I` |✔ |✔ |✔ | +|`KC_J` | |`j` and `J` |✔ |✔ |✔ | +|`KC_K` | |`k` and `K` |✔ |✔ |✔ | +|`KC_L` | |`l` and `L` |✔ |✔ |✔ | +|`KC_M` | |`m` and `M` |✔ |✔ |✔ | +|`KC_N` | |`n` and `N` |✔ |✔ |✔ | +|`KC_O` | |`o` and `O` |✔ |✔ |✔ | +|`KC_P` | |`p` and `P` |✔ |✔ |✔ | +|`KC_Q` | |`q` and `Q` |✔ |✔ |✔ | +|`KC_R` | |`r` and `R` |✔ |✔ |✔ | +|`KC_S` | |`s` and `S` |✔ |✔ |✔ | +|`KC_T` | |`t` and `T` |✔ |✔ |✔ | +|`KC_U` | |`u` and `U` |✔ |✔ |✔ | +|`KC_V` | |`v` and `V` |✔ |✔ |✔ | +|`KC_W` | |`w` and `W` |✔ |✔ |✔ | +|`KC_X` | |`x` and `X` |✔ |✔ |✔ | +|`KC_Y` | |`y` and `Y` |✔ |✔ |✔ | +|`KC_Z` | |`z` and `Z` |✔ |✔ |✔ | +|`KC_1` | |`1` and `!` |✔ |✔ |✔ | +|`KC_2` | |`2` and `@` |✔ |✔ |✔ | +|`KC_3` | |`3` and `#` |✔ |✔ |✔ | +|`KC_4` | |`4` and `$` |✔ |✔ |✔ | +|`KC_5` | |`5` and `%` |✔ |✔ |✔ | +|`KC_6` | |`6` and `^` |✔ |✔ |✔ | +|`KC_7` | |`7` and `&` |✔ |✔ |✔ | +|`KC_8` | |`8` and `*` |✔ |✔ |✔ | +|`KC_9` | |`9` and `(` |✔ |✔ |✔ | +|`KC_0` | |`0` and `)` |✔ |✔ |✔ | +|`KC_ENTER` |`KC_ENT` |Return (Enter) |✔ |✔ |✔ | +|`KC_ESCAPE` |`KC_ESC` |Escape |✔ |✔ |✔ | +|`KC_BACKSPACE` |`KC_BSPC` |Delete (Backspace) |✔ |✔ |✔ | +|`KC_TAB` | |Tab |✔ |✔ |✔ | +|`KC_SPACE` |`KC_SPC` |Spacebar |✔ |✔ |✔ | +|`KC_MINUS` |`KC_MINS` |`-` and `_` |✔ |✔ |✔ | +|`KC_EQUAL` |`KC_EQL` |`=` and `+` |✔ |✔ |✔ | +|`KC_LEFT_BRACKET` |`KC_LBRC` |`[` and `{` |✔ |✔ |✔ | +|`KC_RIGHT_BRACKET` |`KC_RBRC` |`]` and `}` |✔ |✔ |✔ | +|`KC_BACKSLASH` |`KC_BSLS` |`\` and `\|` |✔ |✔ |✔ | +|`KC_NONUS_HASH` |`KC_NUHS` |Non-US `#` and `~` |✔ |✔ |✔ | +|`KC_SEMICOLON` |`KC_SCLN` |`;` and `:` |✔ |✔ |✔ | +|`KC_QUOTE` |`KC_QUOT` |`'` and `"` |✔ |✔ |✔ | +|`KC_GRAVE` |`KC_GRV` |` and `~` |✔ |✔ |✔ | +|`KC_COMMA` |`KC_COMM` |`,` and `<` |✔ |✔ |✔ | +|`KC_DOT` | |`.` and `>` |✔ |✔ |✔ | +|`KC_SLASH` |`KC_SLSH` |`/` and `?` |✔ |✔ |✔ | +|`KC_CAPS_LOCK` |`KC_CAPS` |Caps Lock |✔ |✔ |✔ | +|`KC_F1` | |F1 |✔ |✔ |✔ | +|`KC_F2` | |F2 |✔ |✔ |✔ | +|`KC_F3` | |F3 |✔ |✔ |✔ | +|`KC_F4` | |F4 |✔ |✔ |✔ | +|`KC_F5` | |F5 |✔ |✔ |✔ | +|`KC_F6` | |F6 |✔ |✔ |✔ | +|`KC_F7` | |F7 |✔ |✔ |✔ | +|`KC_F8` | |F8 |✔ |✔ |✔ | +|`KC_F9` | |F9 |✔ |✔ |✔ | +|`KC_F10` | |F10 |✔ |✔ |✔ | +|`KC_F11` | |F11 |✔ |✔ |✔ | +|`KC_F12` | |F12 |✔ |✔ |✔ | +|`KC_PRINT_SCREEN` |`KC_PSCR` |Print Screen |✔ |✔2|✔ | +|`KC_SCROLL_LOCK` |`KC_SCRL`, `KC_BRMD` |Scroll Lock, Brightness Down (macOS) |✔ |✔2|✔ | +|`KC_PAUSE` |`KC_PAUS`, `KC_BRK`, `KC_BRMU` |Pause, Brightness Up (macOS) |✔ |✔2|✔ | +|`KC_INSERT` |`KC_INS` |Insert |✔ | |✔ | +|`KC_HOME` | |Home |✔ |✔ |✔ | +|`KC_PAGE_UP` |`KC_PGUP` |Page Up |✔ |✔ |✔ | +|`KC_DELETE` |`KC_DEL` |Forward Delete |✔ |✔ |✔ | +|`KC_END` | |End |✔ |✔ |✔ | +|`KC_PAGE_DOWN` |`KC_PGDN` |Page Down |✔ |✔ |✔ | +|`KC_RIGHT` |`KC_RGHT` |Right Arrow |✔ |✔ |✔ | +|`KC_LEFT` | |Left Arrow |✔ |✔ |✔ | +|`KC_DOWN` | |Down Arrow |✔ |✔ |✔ | +|`KC_UP` | |Up Arrow |✔ |✔ |✔ | +|`KC_NUM_LOCK` |`KC_NUM` |Keypad Num Lock and Clear |✔ |✔ |✔ | +|`KC_KP_SLASH` |`KC_PSLS` |Keypad `/` |✔ |✔ |✔ | +|`KC_KP_ASTERISK` |`KC_PAST` |Keypad `*` |✔ |✔ |✔ | +|`KC_KP_MINUS` |`KC_PMNS` |Keypad `-` |✔ |✔ |✔ | +|`KC_KP_PLUS` |`KC_PPLS` |Keypad `+` |✔ |✔ |✔ | +|`KC_KP_ENTER` |`KC_PENT` |Keypad Enter |✔ |✔ |✔ | +|`KC_KP_1` |`KC_P1` |Keypad `1` and End |✔ |✔ |✔ | +|`KC_KP_2` |`KC_P2` |Keypad `2` and Down Arrow |✔ |✔ |✔ | +|`KC_KP_3` |`KC_P3` |Keypad `3` and Page Down |✔ |✔ |✔ | +|`KC_KP_4` |`KC_P4` |Keypad `4` and Left Arrow |✔ |✔ |✔ | +|`KC_KP_5` |`KC_P5` |Keypad `5` |✔ |✔ |✔ | +|`KC_KP_6` |`KC_P6` |Keypad `6` and Right Arrow |✔ |✔ |✔ | +|`KC_KP_7` |`KC_P7` |Keypad `7` and Home |✔ |✔ |✔ | +|`KC_KP_8` |`KC_P8` |Keypad `8` and Up Arrow |✔ |✔ |✔ | +|`KC_KP_9` |`KC_P9` |Keypad `9` and Page Up |✔ |✔ |✔ | +|`KC_KP_0` |`KC_P0` |Keypad `0` and Insert |✔ |✔ |✔ | +|`KC_KP_DOT` |`KC_PDOT` |Keypad `.` and Delete |✔ |✔ |✔ | +|`KC_NONUS_BACKSLASH` |`KC_NUBS` |Non-US `\` and `\|` |✔ |✔ |✔ | +|`KC_APPLICATION` |`KC_APP` |Application (Windows Context Menu Key) |✔ | |✔ | +|`KC_KB_POWER` | |System Power | |✔3|✔ | +|`KC_KP_EQUAL` |`KC_PEQL` |Keypad `=` |✔ |✔ |✔ | +|`KC_F13` | |F13 |✔ |✔ |✔ | +|`KC_F14` | |F14 |✔ |✔ |✔ | +|`KC_F15` | |F15 |✔ |✔ |✔ | +|`KC_F16` | |F16 |✔ |✔ |✔ | +|`KC_F17` | |F17 |✔ |✔ |✔ | +|`KC_F18` | |F18 |✔ |✔ |✔ | +|`KC_F19` | |F19 |✔ |✔ |✔ | +|`KC_F20` | |F20 |✔ | |✔ | +|`KC_F21` | |F21 |✔ | |✔ | +|`KC_F22` | |F22 |✔ | |✔ | +|`KC_F23` | |F23 |✔ | |✔ | +|`KC_F24` | |F24 |✔ | |✔ | +|`KC_EXECUTE` |`KC_EXEC` |Execute | | |✔ | +|`KC_HELP` | |Help | | |✔ | +|`KC_MENU` | |Menu | | |✔ | +|`KC_SELECT` |`KC_SLCT` |Select | | |✔ | +|`KC_STOP` | |Stop | | |✔ | +|`KC_AGAIN` |`KC_AGIN` |Again | | |✔ | +|`KC_UNDO` | |Undo | | |✔ | +|`KC_CUT` | |Cut | | |✔ | +|`KC_COPY` | |Copy | | |✔ | +|`KC_PASTE` |`KC_PSTE` |Paste | | |✔ | +|`KC_FIND` | |Find | | |✔ | +|`KC_KB_MUTE` | |Mute | |✔ |✔ | +|`KC_KB_VOLUME_UP` | |Volume Up | |✔ |✔ | +|`KC_KB_VOLUME_DOWN` | |Volume Down | |✔ |✔ | +|`KC_LOCKING_CAPS_LOCK` |`KC_LCAP` |Locking Caps Lock |✔ |✔ | | +|`KC_LOCKING_NUM_LOCK` |`KC_LNUM` |Locking Num Lock |✔ |✔ | | +|`KC_LOCKING_SCROLL_LOCK`|`KC_LSCR` |Locking Scroll Lock |✔ |✔ | | +|`KC_KP_COMMA` |`KC_PCMM` |Keypad `,` | | |✔ | +|`KC_KP_EQUAL_AS400` | |Keypad `=` on AS/400 keyboards | | | | +|`KC_INTERNATIONAL_1` |`KC_INT1` |International 1 |✔ | |✔ | +|`KC_INTERNATIONAL_2` |`KC_INT2` |International 2 |✔ | |✔ | +|`KC_INTERNATIONAL_3` |`KC_INT3` |International 3 |✔ | |✔ | +|`KC_INTERNATIONAL_4` |`KC_INT4` |International 4 |✔ | |✔ | +|`KC_INTERNATIONAL_5` |`KC_INT5` |International 5 |✔ | |✔ | +|`KC_INTERNATIONAL_6` |`KC_INT6` |International 6 | | |✔ | +|`KC_INTERNATIONAL_7` |`KC_INT7` |International 7 | | | | +|`KC_INTERNATIONAL_8` |`KC_INT8` |International 8 | | | | +|`KC_INTERNATIONAL_9` |`KC_INT9` |International 9 | | | | +|`KC_LANGUAGE_1` |`KC_LNG1` |Language 1 | | |✔ | +|`KC_LANGUAGE_2` |`KC_LNG2` |Language 2 | | |✔ | +|`KC_LANGUAGE_3` |`KC_LNG3` |Language 3 | | |✔ | +|`KC_LANGUAGE_4` |`KC_LNG4` |Language 4 | | |✔ | +|`KC_LANGUAGE_5` |`KC_LNG5` |Language 5 | | |✔ | +|`KC_LANGUAGE_6` |`KC_LNG6` |Language 6 | | | | +|`KC_LANGUAGE_7` |`KC_LNG7` |Language 7 | | | | +|`KC_LANGUAGE_8` |`KC_LNG8` |Language 8 | | | | +|`KC_LANGUAGE_9` |`KC_LNG9` |Language 9 | | | | +|`KC_ALTERNATE_ERASE` |`KC_ERAS` |Alternate Erase | | | | +|`KC_SYSTEM_REQUEST` |`KC_SYRQ` |SysReq/Attention | | | | +|`KC_CANCEL` |`KC_CNCL` |Cancel | | | | +|`KC_CLEAR` |`KC_CLR` |Clear | | |✔ | +|`KC_PRIOR` |`KC_PRIR` |Prior | | | | +|`KC_RETURN` |`KC_RETN` |Return | | | | +|`KC_SEPARATOR` |`KC_SEPR` |Separator | | | | +|`KC_OUT` | |Out | | | | +|`KC_OPER` | |Oper | | | | +|`KC_CLEAR_AGAIN` |`KC_CLAG` |Clear/Again | | | | +|`KC_CRSEL` |`KC_CRSL` |CrSel/Props | | | | +|`KC_EXSEL` |`KC_EXSL` |ExSel | | | | +|`KC_LEFT_CTRL` |`KC_LCTL` |Left Control |✔ |✔ |✔ | +|`KC_LEFT_SHIFT` |`KC_LSFT` |Left Shift |✔ |✔ |✔ | +|`KC_LEFT_ALT` |`KC_LALT`, `KC_LOPT` |Left Alt (Option) |✔ |✔ |✔ | +|`KC_LEFT_GUI` |`KC_LGUI`, `KC_LCMD`, `KC_LWIN`|Left GUI (Windows/Command/Meta key) |✔ |✔ |✔ | +|`KC_RIGHT_CTRL` |`KC_RCTL` |Right Control |✔ |✔ |✔ | +|`KC_RIGHT_SHIFT` |`KC_RSFT` |Right Shift |✔ |✔ |✔ | +|`KC_RIGHT_ALT` |`KC_RALT`, `KC_ROPT`, `KC_ALGR`|Right Alt (Option/AltGr) |✔ |✔ |✔ | +|`KC_RIGHT_GUI` |`KC_RGUI`, `KC_RCMD`, `KC_RWIN`|Right GUI (Windows/Command/Meta key) |✔ |✔ |✔ | +|`KC_SYSTEM_POWER` |`KC_PWR` |System Power Down |✔ |✔3|✔ | +|`KC_SYSTEM_SLEEP` |`KC_SLEP` |System Sleep |✔ |✔3|✔ | +|`KC_SYSTEM_WAKE` |`KC_WAKE` |System Wake | |✔3|✔ | +|`KC_AUDIO_MUTE` |`KC_MUTE` |Mute |✔ |✔ |✔ | +|`KC_AUDIO_VOL_UP` |`KC_VOLU` |Volume Up |✔ |✔4|✔ | +|`KC_AUDIO_VOL_DOWN` |`KC_VOLD` |Volume Down |✔ |✔4|✔ | +|`KC_MEDIA_NEXT_TRACK` |`KC_MNXT` |Next Track |✔ |✔5|✔ | +|`KC_MEDIA_PREV_TRACK` |`KC_MPRV` |Previous Track |✔ |✔5|✔ | +|`KC_MEDIA_STOP` |`KC_MSTP` |Stop Track |✔ | |✔ | +|`KC_MEDIA_PLAY_PAUSE` |`KC_MPLY` |Play/Pause Track |✔ |✔ |✔ | +|`KC_MEDIA_SELECT` |`KC_MSEL` |Launch Media Player |✔ | |✔ | +|`KC_MEDIA_EJECT` |`KC_EJCT` |Eject | |✔ |✔ | +|`KC_MAIL` | |Launch Mail |✔ | |✔ | +|`KC_CALCULATOR` |`KC_CALC` |Launch Calculator |✔ | |✔ | +|`KC_MY_COMPUTER` |`KC_MYCM` |Launch My Computer |✔ | |✔ | +|`KC_WWW_SEARCH` |`KC_WSCH` |Browser Search |✔ | |✔ | +|`KC_WWW_HOME` |`KC_WHOM` |Browser Home |✔ | |✔ | +|`KC_WWW_BACK` |`KC_WBAK` |Browser Back |✔ | |✔ | +|`KC_WWW_FORWARD` |`KC_WFWD` |Browser Forward |✔ | |✔ | +|`KC_WWW_STOP` |`KC_WSTP` |Browser Stop |✔ | |✔ | +|`KC_WWW_REFRESH` |`KC_WREF` |Browser Refresh |✔ | |✔ | +|`KC_WWW_FAVORITES` |`KC_WFAV` |Browser Favorites |✔ | |✔ | +|`KC_MEDIA_FAST_FORWARD` |`KC_MFFD` |Next Track |✔ |✔5|✔ | +|`KC_MEDIA_REWIND` |`KC_MRWD` |Previous Track |✔6|✔5|✔ | +|`KC_BRIGHTNESS_UP` |`KC_BRIU` |Brightness Up |✔ |✔ |✔ | +|`KC_BRIGHTNESS_DOWN` |`KC_BRID` |Brightness Down |✔ |✔ |✔ | 1. The Linux kernel HID driver recognizes [nearly all keycodes](https://github.com/torvalds/linux/blob/master/drivers/hid/hid-input.c), but the default bindings depend on the DE/WM.
    2. Treated as F13-F15.
    diff --git a/docs/keycodes_basic.md b/docs/keycodes_basic.md index 6a31204f33..6f6ef7a3fd 100644 --- a/docs/keycodes_basic.md +++ b/docs/keycodes_basic.md @@ -74,118 +74,118 @@ The basic set of keycodes are based on the [HID Keyboard/Keypad Usage Page (0x07 ## Punctuation -|Key |Aliases |Description | -|-----------------|-------------------|-----------------------------------------------| -|`KC_ENTER` |`KC_ENT` |Return (Enter) | -|`KC_ESCAPE` |`KC_ESC` |Escape | -|`KC_BSPACE` |`KC_BSPC` |Delete (Backspace) | -|`KC_TAB` | |Tab | -|`KC_SPACE` |`KC_SPC` |Spacebar | -|`KC_MINUS` |`KC_MINS` |`-` and `_` | -|`KC_EQUAL` |`KC_EQL` |`=` and `+` | -|`KC_LBRACKET` |`KC_LBRC` |`[` and `{` | -|`KC_RBRACKET` |`KC_RBRC` |`]` and `}` | -|`KC_BSLASH` |`KC_BSLS` |`\` and `\|` | -|`KC_NONUS_HASH` |`KC_NUHS` |Non-US `#` and `~` | -|`KC_SCOLON` |`KC_SCLN` |`;` and `:` | -|`KC_QUOTE` |`KC_QUOT` |`'` and `"` | -|`KC_GRAVE` |`KC_GRV`, `KC_ZKHK`|` and `~`, JIS Zenkaku/Hankaku| -|`KC_COMMA` |`KC_COMM` |`,` and `<` | -|`KC_DOT` | |`.` and `>` | -|`KC_SLASH` |`KC_SLSH` |`/` and `?` | -|`KC_NONUS_BSLASH`|`KC_NUBS` |Non-US `\` and `\|` | +|Key |Aliases |Description | +|--------------------|---------|--------------------------| +|`KC_ENTER` |`KC_ENT` |Return (Enter) | +|`KC_ESCAPE` |`KC_ESC` |Escape | +|`KC_BACKSPACE` |`KC_BSPC`|Delete (Backspace) | +|`KC_TAB` | |Tab | +|`KC_SPACE` |`KC_SPC` |Spacebar | +|`KC_MINUS` |`KC_MINS`|`-` and `_` | +|`KC_EQUAL` |`KC_EQL` |`=` and `+` | +|`KC_LEFT_BRACKET` |`KC_LBRC`|`[` and `{` | +|`KC_RIGHT_BRACKET` |`KC_RBRC`|`]` and `}` | +|`KC_BACKSLASH` |`KC_BSLS`|`\` and `\|` | +|`KC_NONUS_HASH` |`KC_NUHS`|Non-US `#` and `~` | +|`KC_SEMICOLON` |`KC_SCLN`|`;` and `:` | +|`KC_QUOTE` |`KC_QUOT`|`'` and `"` | +|`KC_GRAVE` |`KC_GRV` |` and `~`| +|`KC_COMMA` |`KC_COMM`|`,` and `<` | +|`KC_DOT` | |`.` and `>` | +|`KC_SLASH` |`KC_SLSH`|`/` and `?` | +|`KC_NONUS_BACKSLASH`|`KC_NUBS`|Non-US `\` and `\|` | ## Lock Keys -|Key |Aliases |Description | -|-------------------|--------------------|------------------------------------| -|`KC_CAPSLOCK` |`KC_CLCK`, `KC_CAPS`|Caps Lock | -|`KC_SCROLLLOCK` |`KC_SLCK`, `KC_BRMD`|Scroll Lock, Brightness Down (macOS)| -|`KC_NUMLOCK` |`KC_NLCK` |Keypad Num Lock and Clear | -|`KC_LOCKING_CAPS` |`KC_LCAP` |Locking Caps Lock | -|`KC_LOCKING_NUM` |`KC_LNUM` |Locking Num Lock | -|`KC_LOCKING_SCROLL`|`KC_LSCR` |Locking Scroll Lock | +|Key |Aliases |Description | +|------------------------|--------------------|------------------------------------| +|`KC_CAPS_LOCK` |`KC_CAPS` |Caps Lock | +|`KC_SCROLL_LOCK` |`KC_SCRL`, `KC_BRMD`|Scroll Lock, Brightness Down (macOS)| +|`KC_NUM_LOCK` |`KC_NUM` |Keypad Num Lock and Clear | +|`KC_LOCKING_CAPS_LOCK` |`KC_LCAP` |Locking Caps Lock | +|`KC_LOCKING_NUM_LOCK` |`KC_LNUM` |Locking Num Lock | +|`KC_LOCKING_SCROLL_LOCK`|`KC_LSCR` |Locking Scroll Lock | ## Modifiers -|Key |Aliases |Description | -|-----------|--------------------|------------------------------------| -|`KC_LCTRL` |`KC_LCTL` |Left Control | -|`KC_LSHIFT`|`KC_LSFT` |Left Shift | -|`KC_LALT` |`KC_LOPT` |Left Alt (Option) | -|`KC_LGUI` |`KC_LCMD`, `KC_LWIN`|Left GUI (Windows/Command/Meta key) | -|`KC_RCTRL` |`KC_RCTL` |Right Control | -|`KC_RSHIFT`|`KC_RSFT` |Right Shift | -|`KC_RALT` |`KC_ROPT`, `KC_ALGR`|Right Alt (Option/AltGr) | -|`KC_RGUI` |`KC_RCMD`, `KC_RWIN`|Right GUI (Windows/Command/Meta key)| +|Key |Aliases |Description | +|----------------|-------------------------------|------------------------------------| +|`KC_LEFT_CTRL` |`KC_LCTL` |Left Control | +|`KC_LEFT_SHIFT` |`KC_LSFT` |Left Shift | +|`KC_LEFT_ALT` |`KC_LALT`, `KC_LOPT` |Left Alt (Option) | +|`KC_LEFT_GUI` |`KC_LGUI`, `KC_LCMD`, `KC_LWIN`|Left GUI (Windows/Command/Meta key) | +|`KC_RIGHT_CTRL` |`KC_RCTL` |Right Control | +|`KC_RIGHT_SHIFT`|`KC_RSFT` |Right Shift | +|`KC_RIGHT_ALT` |`KC_RALT`, `KC_ROPT`, `KC_ALGR`|Right Alt (Option/AltGr) | +|`KC_RIGHT_GUI` |`KC_RGUI`, `KC_RCMD`, `KC_RWIN`|Right GUI (Windows/Command/Meta key)| ## International -|Key |Aliases |Description | -|----------|---------|---------------------| -|`KC_INT1` |`KC_RO` |JIS `\` and `_` | -|`KC_INT2` |`KC_KANA`|JIS Katakana/Hiragana| -|`KC_INT3` |`KC_JYEN`|JIS `¥` and `\|` | -|`KC_INT4` |`KC_HENK`|JIS Henkan | -|`KC_INT5` |`KC_MHEN`|JIS Muhenkan | -|`KC_INT6` | |JIS Numpad `,` | -|`KC_INT7` | |International 7 | -|`KC_INT8` | |International 8 | -|`KC_INT9` | |International 9 | -|`KC_LANG1`|`KC_HAEN`|Hangul/English | -|`KC_LANG2`|`KC_HANJ`|Hanja | -|`KC_LANG3`| |JIS Katakana | -|`KC_LANG4`| |JIS Hiragana | -|`KC_LANG5`| |JIS Zenkaku/Hankaku | -|`KC_LANG6`| |Language 6 | -|`KC_LANG7`| |Language 7 | -|`KC_LANG8`| |Language 8 | -|`KC_LANG9`| |Language 9 | +|Key |Aliases |Description | +|--------------------|---------|---------------------| +|`KC_INTERNATIONAL_1`|`KC_INT1`|JIS `\` and `_` | +|`KC_INTERNATIONAL_2`|`KC_INT2`|JIS Katakana/Hiragana| +|`KC_INTERNATIONAL_3`|`KC_INT3`|JIS `¥` and `\|` | +|`KC_INTERNATIONAL_4`|`KC_INT4`|JIS Henkan | +|`KC_INTERNATIONAL_5`|`KC_INT5`|JIS Muhenkan | +|`KC_INTERNATIONAL_6`|`KC_INT6`|JIS Numpad `,` | +|`KC_INTERNATIONAL_7`|`KC_INT7`|International 7 | +|`KC_INTERNATIONAL_8`|`KC_INT8`|International 8 | +|`KC_INTERNATIONAL_9`|`KC_INT9`|International 9 | +|`KC_LANGUAGE_1` |`KC_LNG1`|Hangul/English | +|`KC_LANGUAGE_2` |`KC_LNG2`|Hanja | +|`KC_LANGUAGE_3` |`KC_LNG3`|JIS Katakana | +|`KC_LANGUAGE_4` |`KC_LNG4`|JIS Hiragana | +|`KC_LANGUAGE_5` |`KC_LNG5`|JIS Zenkaku/Hankaku | +|`KC_LANGUAGE_6` |`KC_LNG6`|Language 6 | +|`KC_LANGUAGE_7` |`KC_LNG7`|Language 7 | +|`KC_LANGUAGE_8` |`KC_LNG8`|Language 8 | +|`KC_LANGUAGE_9` |`KC_LNG9`|Language 9 | ## Commands -|Key |Aliases |Description | -|------------------|------------------------------|--------------------------------------| -|`KC_PSCREEN` |`KC_PSCR` |Print Screen | -|`KC_PAUSE` |`KC_PAUS`, `KC_BRK`, `KC_BRMU`|Pause, Brightness Up (macOS) | -|`KC_INSERT` |`KC_INS` |Insert | -|`KC_HOME` | |Home | -|`KC_PGUP` | |Page Up | -|`KC_DELETE` |`KC_DEL` |Forward Delete | -|`KC_END` | |End | -|`KC_PGDOWN` |`KC_PGDN` |Page Down | -|`KC_RIGHT` |`KC_RGHT` |Right Arrow | -|`KC_LEFT` | |Left Arrow | -|`KC_DOWN` | |Down Arrow | -|`KC_UP` | |Up Arrow | -|`KC_APPLICATION` |`KC_APP` |Application (Windows Context Menu Key)| -|`KC_POWER` | |System Power | -|`KC_EXECUTE` |`KC_EXEC` |Execute | -|`KC_HELP` | |Help | -|`KC_MENU` | |Menu | -|`KC_SELECT` |`KC_SLCT` |Select | -|`KC_STOP` | |Stop | -|`KC_AGAIN` |`KC_AGIN` |Again | -|`KC_UNDO` | |Undo | -|`KC_CUT` | |Cut | -|`KC_COPY` | |Copy | -|`KC_PASTE` |`KC_PSTE` |Paste | -|`KC_FIND` | |Find | -|`KC__MUTE` | |Mute | -|`KC__VOLUP` | |Volume Up | -|`KC__VOLDOWN` | |Volume Down | -|`KC_ALT_ERASE` |`KC_ERAS` |Alternate Erase | -|`KC_SYSREQ` | |SysReq/Attention | -|`KC_CANCEL` | |Cancel | -|`KC_CLEAR` |`KC_CLR` |Clear | -|`KC_PRIOR` | |Prior | -|`KC_RETURN` | |Return | -|`KC_SEPARATOR` | |Separator | -|`KC_OUT` | |Out | -|`KC_OPER` | |Oper | -|`KC_CLEAR_AGAIN` | |Clear/Again | -|`KC_CRSEL` | |CrSel/Props | -|`KC_EXSEL` | |ExSel | +|Key |Aliases |Description | +|--------------------|------------------------------|--------------------------------------| +|`KC_PRINT_SCREEN` |`KC_PSCR` |Print Screen | +|`KC_PAUSE` |`KC_PAUS`, `KC_BRK`, `KC_BRMU`|Pause, Brightness Up (macOS) | +|`KC_INSERT` |`KC_INS` |Insert | +|`KC_HOME` | |Home | +|`KC_PAGE_UP` |`KC_PGUP` |Page Up | +|`KC_DELETE` |`KC_DEL` |Forward Delete | +|`KC_END` | |End | +|`KC_PAGE_DOWN` |`KC_PGDN` |Page Down | +|`KC_RIGHT` |`KC_RGHT` |Right Arrow | +|`KC_LEFT` | |Left Arrow | +|`KC_DOWN` | |Down Arrow | +|`KC_UP` | |Up Arrow | +|`KC_APPLICATION` |`KC_APP` |Application (Windows Context Menu Key)| +|`KC_KB_POWER` | |System Power | +|`KC_EXECUTE` |`KC_EXEC` |Execute | +|`KC_HELP` | |Help | +|`KC_MENU` | |Menu | +|`KC_SELECT` |`KC_SLCT` |Select | +|`KC_STOP` | |Stop | +|`KC_AGAIN` |`KC_AGIN` |Again | +|`KC_UNDO` | |Undo | +|`KC_CUT` | |Cut | +|`KC_COPY` | |Copy | +|`KC_PASTE` |`KC_PSTE` |Paste | +|`KC_FIND` | |Find | +|`KC_KB_MUTE` | |Mute | +|`KC_KB_VOLUME_UP` | |Volume Up | +|`KC_KB_VOLUME_DOWN` | |Volume Down | +|`KC_ALTERNATE_ERASE`|`KC_ERAS` |Alternate Erase | +|`KC_SYSTEM_REQUEST` |`KC_SYRQ` |SysReq/Attention | +|`KC_CANCEL` |`KC_CNCL` |Cancel | +|`KC_CLEAR` |`KC_CLR` |Clear | +|`KC_PRIOR` |`KC_PRIR` |Prior | +|`KC_RETURN` |`KC_RETN` |Return | +|`KC_SEPARATOR` |`KC_SEPR` |Separator | +|`KC_OUT` | |Out | +|`KC_OPER` | |Oper | +|`KC_CLEAR_AGAIN` |`KC_CLAG` |Clear/Again | +|`KC_CRSEL` |`KC_CRSL` |CrSel/Props | +|`KC_EXSEL` |`KC_EXSL` |ExSel | ## Media Keys diff --git a/docs/keymap.md b/docs/keymap.md index ef476e87f5..bec781e684 100644 --- a/docs/keymap.md +++ b/docs/keymap.md @@ -105,7 +105,7 @@ At the top of the file you'll find this: #include QMK_KEYBOARD_H // Helpful defines - #define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT)) + #define GRAVE_MODS (MOD_BIT(KC_LSFT)|MOD_BIT(KC_RSFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT)) /* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * You can use _______ in place for KC_TRNS (transparent) * @@ -164,7 +164,7 @@ Our function layer is, from a code point of view, no different from the base lay [_FL] = LAYOUT( KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, \ - _______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS, _______, _______, _______, _______, \ + _______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SCRL, KC_PAUS, _______, _______, _______, _______, \ _______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \ _______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, \ _______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END), diff --git a/docs/reference_configurator_support.md b/docs/reference_configurator_support.md index ba3d49e2b2..db6cd80a20 100644 --- a/docs/reference_configurator_support.md +++ b/docs/reference_configurator_support.md @@ -168,7 +168,7 @@ k33 | {"label":"Enter", "x":3, "y":3, "h":2} k40 | {"label":"0", "x":0, "y":4, "w":2} k42 | {"label":".", "x":2, "y":4} -When a user selects the top-left key in the Configurator, and assigns Num Lock to it, the Configurator builds a keymap file with `KC_NLCK` as the first key, and so on as the keymap is built. The `label` keys are not used; they are only for the user's reference in identifying specific keys when debugging the `info.json` file. +When a user selects the top-left key in the Configurator, and assigns Num Lock to it, the Configurator builds a keymap file with `KC_NUM` as the first key, and so on as the keymap is built. The `label` keys are not used; they are only for the user's reference in identifying specific keys when debugging the `info.json` file. ## Issues and Hazards diff --git a/docs/tap_hold.md b/docs/tap_hold.md index 71bff30baa..5a4c209617 100644 --- a/docs/tap_hold.md +++ b/docs/tap_hold.md @@ -247,7 +247,7 @@ To enable `retro tapping`, add the following to your `config.h`: Holding and releasing a dual function key without pressing another key will result in nothing happening. With retro tapping enabled, releasing the key without pressing another will send the original keycode even if it is outside the tapping term. -For instance, holding and releasing `LT(2, KC_SPACE)` without hitting another key will result in nothing happening. With this enabled, it will send `KC_SPACE` instead. +For instance, holding and releasing `LT(2, KC_SPC)` without hitting another key will result in nothing happening. With this enabled, it will send `KC_SPC` instead. For more granular control of this feature, you can add the following to your `config.h`: @@ -260,7 +260,7 @@ You can then add the following function to your keymap: ```c bool get_retro_tapping(uint16_t keycode, keyrecord_t *record) { switch (keycode) { - case LT(2, KC_SPACE): + case LT(2, KC_SPC): return true; default: return false; diff --git a/docs/understanding_qmk.md b/docs/understanding_qmk.md index 42a41fbe2a..e0c2ab7dc3 100644 --- a/docs/understanding_qmk.md +++ b/docs/understanding_qmk.md @@ -66,10 +66,10 @@ At the keyboard level we define a C macro (typically named `LAYOUT()`) which map k30, k31, k32, k33, \ k40, k42 \ ) { \ - { k00, k01, k02, k03, }, \ - { k10, k11, k12, k13, }, \ - { k20, k21, k22, KC_NO, }, \ - { k30, k31, k32, k33, }, \ + { k00, k01, k02, k03 }, \ + { k10, k11, k12, k13 }, \ + { k20, k21, k22, KC_NO }, \ + { k30, k31, k32, k33 }, \ { k40, KC_NO, k42, KC_NO } \ } ``` @@ -82,14 +82,15 @@ You can also use this macro to handle unusual matrix layouts, for example the [C At the keymap level we make use of our `LAYOUT()` macro above to map keycodes to physical locations to matrix locations. It looks like this: -``` +```c const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[0] = LAYOUT( - KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \ - KC_P7, KC_P8, KC_P9, KC_PPLS, \ - KC_P4, KC_P5, KC_P6, \ - KC_P1, KC_P2, KC_P3, KC_PENT, \ - KC_P0, KC_PDOT) + [0] = LAYOUT( + KC_NUM, KC_PSLS, KC_PAST, KC_PMNS, + KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_P4, KC_P5, KC_P6, + KC_P1, KC_P2, KC_P3, KC_PENT, + KC_P0, KC_PDOT + ) } ``` @@ -123,7 +124,7 @@ And when our current scan completes it will look like this: } ``` -Comparing against our keymap we can see that the pressed key is KC_NLCK. From here we dispatch to the `process_record` set of functions. +Comparing against our keymap we can see that the pressed key is `KC_NUM`. From here we dispatch to the `process_record` set of functions. diff --git a/layouts/default/60_hhkb/default_60_hhkb/keymap.c b/layouts/default/60_hhkb/default_60_hhkb/keymap.c index 73804b8bb8..81a0fc7d9f 100644 --- a/layouts/default/60_hhkb/default_60_hhkb/keymap.c +++ b/layouts/default/60_hhkb/default_60_hhkb/keymap.c @@ -37,7 +37,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [1] = LAYOUT_60_hhkb( KC_PWR, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, - KC_CAPS, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, _______, _______, + KC_CAPS, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SCRL, KC_PAUS, KC_UP, _______, _______, _______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, KC_PAST, KC_PSLS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_PENT, _______, _______, _______, _______, _______, _______, KC_PPLS, KC_PMNS, KC_END, KC_PGDN, KC_DOWN, _______, _______, _______, _______, _______, _______, _______ diff --git a/layouts/default/64_ansi/default_64_ansi/keymap.c b/layouts/default/64_ansi/default_64_ansi/keymap.c index ff1356e953..aae78dc8da 100644 --- a/layouts/default/64_ansi/default_64_ansi/keymap.c +++ b/layouts/default/64_ansi/default_64_ansi/keymap.c @@ -25,7 +25,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), [1] = LAYOUT_64_ansi( KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, KC_PAUS, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SCRL, KC_PAUS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGUP, _______, _______, _______, _______, _______, _______, MO(2), KC_HOME, KC_PGDN, KC_END diff --git a/layouts/default/64_iso/default_64_iso/keymap.c b/layouts/default/64_iso/default_64_iso/keymap.c index a0ac1a1511..45e07dd9cc 100644 --- a/layouts/default/64_iso/default_64_iso/keymap.c +++ b/layouts/default/64_iso/default_64_iso/keymap.c @@ -25,7 +25,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), [1] = LAYOUT_64_iso( KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SLCK, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR, KC_SCRL, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGUP, _______, _______, _______, _______, _______, _______, MO(2), KC_HOME, KC_PGDN, KC_END diff --git a/layouts/default/96_ansi/default_96_ansi/keymap.c b/layouts/default/96_ansi/default_96_ansi/keymap.c index 18a67fcefd..35ece2f708 100644 --- a/layouts/default/96_ansi/default_96_ansi/keymap.c +++ b/layouts/default/96_ansi/default_96_ansi/keymap.c @@ -33,8 +33,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * └────┴────┴────┴────────────────────────┴───┴───┴───┴───┴───┴───┴───┴───┴───┘ */ [0] = LAYOUT_96_ansi( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, KC_VOLD, KC_VOLU, KC_MUTE, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SCRL, KC_PAUS, KC_VOLD, KC_VOLU, KC_MUTE, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NUM, KC_PSLS, KC_PAST, KC_PMNS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PPLS, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, diff --git a/layouts/default/96_iso/default_96_iso/keymap.c b/layouts/default/96_iso/default_96_iso/keymap.c index df36f95abc..742bb9cec3 100644 --- a/layouts/default/96_iso/default_96_iso/keymap.c +++ b/layouts/default/96_iso/default_96_iso/keymap.c @@ -33,8 +33,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * └────┴────┴────┴────────────────────────┴───┴───┴───┴───┴───┴───┴───┴───┴───┘ */ [0] = LAYOUT_96_iso( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, KC_VOLD, KC_VOLU, KC_MUTE, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SCRL, KC_PAUS, KC_VOLD, KC_VOLU, KC_MUTE, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NUM, KC_PSLS, KC_PAST, KC_PMNS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_P7, KC_P8, KC_P9, KC_PPLS, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_P4, KC_P5, KC_P6, KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, diff --git a/layouts/default/fullsize_ansi/default_fullsize_ansi/keymap.c b/layouts/default/fullsize_ansi/default_fullsize_ansi/keymap.c index dbe7c58c6c..2e7bd55f95 100644 --- a/layouts/default/fullsize_ansi/default_fullsize_ansi/keymap.c +++ b/layouts/default/fullsize_ansi/default_fullsize_ansi/keymap.c @@ -18,9 +18,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ └───┴───┴───┘ └───────┴───┴───┘ */ [0] = LAYOUT_fullsize_ansi( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SCRL, KC_PAUS, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NUM, KC_PSLS, KC_PAST, KC_PMNS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PPLS, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, diff --git a/layouts/default/fullsize_iso/default_fullsize_iso/keymap.c b/layouts/default/fullsize_iso/default_fullsize_iso/keymap.c index e2df016ad2..c88693b2d8 100644 --- a/layouts/default/fullsize_iso/default_fullsize_iso/keymap.c +++ b/layouts/default/fullsize_iso/default_fullsize_iso/keymap.c @@ -18,9 +18,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ └───┴───┴───┘ └───────┴───┴───┘ */ [0] = LAYOUT_fullsize_iso( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SCRL, KC_PAUS, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_NUM, KC_PSLS, KC_PAST, KC_PMNS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, KC_END, KC_PGDN, KC_P7, KC_P8, KC_P9, KC_PPLS, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_P4, KC_P5, KC_P6, KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, diff --git a/layouts/default/numpad_6x4/default_numpad_6x4/keymap.c b/layouts/default/numpad_6x4/default_numpad_6x4/keymap.c index 85328983b7..53cd4d3469 100644 --- a/layouts/default/numpad_6x4/default_numpad_6x4/keymap.c +++ b/layouts/default/numpad_6x4/default_numpad_6x4/keymap.c @@ -18,7 +18,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [0] = LAYOUT_numpad_6x4( KC_ESC, KC_TAB, MO(1), KC_BSPC, - KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_NUM, KC_PSLS, KC_PAST, KC_PMNS, KC_P7, KC_P8, KC_P9, KC_P4, KC_P5, KC_P6, KC_PPLS, KC_P1, KC_P2, KC_P3, diff --git a/layouts/default/numpad_6x5/default_numpad_6x5/keymap.c b/layouts/default/numpad_6x5/default_numpad_6x5/keymap.c index 27ef07d19d..2bdbfc468d 100644 --- a/layouts/default/numpad_6x5/default_numpad_6x5/keymap.c +++ b/layouts/default/numpad_6x5/default_numpad_6x5/keymap.c @@ -33,12 +33,12 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * └───┴───────┴───┴───┘ */ [0] = LAYOUT_numpad_6x5( - KC_GRAVE, KC_ESC, KC_TAB, MO(1), KC_BSPC, - KC_COMMA, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, - KC_LGUI, KC_P7, KC_P8, KC_P9, - KC_LALT, KC_P4, KC_P5, KC_P6, KC_PPLS, - KC_LSHIFT, KC_P1, KC_P2, KC_P3, - KC_LCTRL, KC_P0, KC_PDOT, KC_PENT + KC_GRV, KC_ESC, KC_TAB, MO(1), KC_BSPC, + KC_COMM, KC_NUM, KC_PSLS, KC_PAST, KC_PMNS, + KC_LGUI, KC_P7, KC_P8, KC_P9, + KC_LALT, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT, KC_P1, KC_P2, KC_P3, + KC_LCTL, KC_P0, KC_PDOT, KC_PENT ), /* diff --git a/layouts/default/ortho_6x4/default_ortho_6x4/keymap.c b/layouts/default/ortho_6x4/default_ortho_6x4/keymap.c index 9beb9204a9..d1dc759de3 100644 --- a/layouts/default/ortho_6x4/default_ortho_6x4/keymap.c +++ b/layouts/default/ortho_6x4/default_ortho_6x4/keymap.c @@ -22,7 +22,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [0] = LAYOUT_ortho_6x4( KC_ESC, KC_TAB, MO(1), KC_BSPC, - KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_NUM, KC_PSLS, KC_PAST, KC_PMNS, KC_P7, KC_P8, KC_P9, KC_PPLS, KC_P4, KC_P5, KC_P6, KC_PERC, KC_P1, KC_P2, KC_P3, KC_EQL, diff --git a/layouts/default/tkl_ansi/default_tkl_ansi/keymap.c b/layouts/default/tkl_ansi/default_tkl_ansi/keymap.c index 8b41a22b37..caed507c75 100644 --- a/layouts/default/tkl_ansi/default_tkl_ansi/keymap.c +++ b/layouts/default/tkl_ansi/default_tkl_ansi/keymap.c @@ -18,7 +18,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ └───┴───┴───┘ */ [0] = LAYOUT_tkl_ansi( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SCRL, KC_PAUS, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, diff --git a/layouts/default/tkl_iso/default_tkl_iso/keymap.c b/layouts/default/tkl_iso/default_tkl_iso/keymap.c index f82939d876..2c4ffd0128 100644 --- a/layouts/default/tkl_iso/default_tkl_iso/keymap.c +++ b/layouts/default/tkl_iso/default_tkl_iso/keymap.c @@ -18,7 +18,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ └───┴───┴───┘ */ [0] = LAYOUT_tkl_iso( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SCRL, KC_PAUS, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, KC_END, KC_PGDN, diff --git a/quantum/action.c b/quantum/action.c index 5c33bd6d2c..ceaaa551f5 100644 --- a/quantum/action.c +++ b/quantum/action.c @@ -277,8 +277,8 @@ void process_action(keyrecord_t *record, action_t action) { if (event.pressed) { if (mods) { if (IS_MOD(action.key.code) || action.key.code == KC_NO) { - // e.g. LSFT(KC_LGUI): we don't want the LSFT to be weak as it would make it useless. - // This also makes LSFT(KC_LGUI) behave exactly the same as LGUI(KC_LSFT). + // e.g. LSFT(KC_LEFT_GUI): we don't want the LSFT to be weak as it would make it useless. + // This also makes LSFT(KC_LEFT_GUI) behave exactly the same as LGUI(KC_LEFT_SHIFT). // Same applies for some keys like KC_MEH which are declared as MEH(KC_NO). add_mods(mods); } else { @@ -410,7 +410,7 @@ void process_action(keyrecord_t *record, action_t action) { } else { if (tap_count > 0) { dprint("MODS_TAP: Tap: unregister_code\n"); - if (action.layer_tap.code == KC_CAPS) { + if (action.layer_tap.code == KC_CAPS_LOCK) { wait_ms(TAP_HOLD_CAPS_DELAY); } else { wait_ms(TAP_CODE_DELAY); @@ -609,7 +609,7 @@ void process_action(keyrecord_t *record, action_t action) { } else { if (tap_count > 0) { dprint("KEYMAP_TAP_KEY: Tap: unregister_code\n"); - if (action.layer_tap.code == KC_CAPS) { + if (action.layer_tap.code == KC_CAPS_LOCK) { wait_ms(TAP_HOLD_CAPS_DELAY); } else { wait_ms(TAP_CODE_DELAY); @@ -786,37 +786,37 @@ void register_code(uint8_t code) { return; } #ifdef LOCKING_SUPPORT_ENABLE - else if (KC_LOCKING_CAPS == code) { + else if (KC_LOCKING_CAPS_LOCK == code) { # ifdef LOCKING_RESYNC_ENABLE // Resync: ignore if caps lock already is on if (host_keyboard_leds() & (1 << USB_LED_CAPS_LOCK)) return; # endif - add_key(KC_CAPSLOCK); + add_key(KC_CAPS_LOCK); send_keyboard_report(); wait_ms(100); - del_key(KC_CAPSLOCK); + del_key(KC_CAPS_LOCK); send_keyboard_report(); } - else if (KC_LOCKING_NUM == code) { + else if (KC_LOCKING_NUM_LOCK == code) { # ifdef LOCKING_RESYNC_ENABLE if (host_keyboard_leds() & (1 << USB_LED_NUM_LOCK)) return; # endif - add_key(KC_NUMLOCK); + add_key(KC_NUM_LOCK); send_keyboard_report(); wait_ms(100); - del_key(KC_NUMLOCK); + del_key(KC_NUM_LOCK); send_keyboard_report(); } - else if (KC_LOCKING_SCROLL == code) { + else if (KC_LOCKING_SCROLL_LOCK == code) { # ifdef LOCKING_RESYNC_ENABLE if (host_keyboard_leds() & (1 << USB_LED_SCROLL_LOCK)) return; # endif - add_key(KC_SCROLLLOCK); + add_key(KC_SCROLL_LOCK); send_keyboard_report(); wait_ms(100); - del_key(KC_SCROLLLOCK); + del_key(KC_SCROLL_LOCK); send_keyboard_report(); } #endif @@ -882,34 +882,34 @@ void unregister_code(uint8_t code) { return; } #ifdef LOCKING_SUPPORT_ENABLE - else if (KC_LOCKING_CAPS == code) { + else if (KC_LOCKING_CAPS_LOCK == code) { # ifdef LOCKING_RESYNC_ENABLE // Resync: ignore if caps lock already is off if (!(host_keyboard_leds() & (1 << USB_LED_CAPS_LOCK))) return; # endif - add_key(KC_CAPSLOCK); + add_key(KC_CAPS_LOCK); send_keyboard_report(); - del_key(KC_CAPSLOCK); + del_key(KC_CAPS_LOCK); send_keyboard_report(); } - else if (KC_LOCKING_NUM == code) { + else if (KC_LOCKING_NUM_LOCK == code) { # ifdef LOCKING_RESYNC_ENABLE if (!(host_keyboard_leds() & (1 << USB_LED_NUM_LOCK))) return; # endif - add_key(KC_NUMLOCK); + add_key(KC_NUM_LOCK); send_keyboard_report(); - del_key(KC_NUMLOCK); + del_key(KC_NUM_LOCK); send_keyboard_report(); } - else if (KC_LOCKING_SCROLL == code) { + else if (KC_LOCKING_SCROLL_LOCK == code) { # ifdef LOCKING_RESYNC_ENABLE if (!(host_keyboard_leds() & (1 << USB_LED_SCROLL_LOCK))) return; # endif - add_key(KC_SCROLLLOCK); + add_key(KC_SCROLL_LOCK); send_keyboard_report(); - del_key(KC_SCROLLLOCK); + del_key(KC_SCROLL_LOCK); send_keyboard_report(); } #endif @@ -952,9 +952,9 @@ void tap_code_delay(uint8_t code, uint16_t delay) { /** \brief Tap a keycode with the default delay. * - * \param code The basic keycode to tap. If `code` is `KC_CAPS`, the delay will be `TAP_HOLD_CAPS_DELAY`, otherwise `TAP_CODE_DELAY`, if defined. + * \param code The basic keycode to tap. If `code` is `KC_CAPS_LOCK`, the delay will be `TAP_HOLD_CAPS_DELAY`, otherwise `TAP_CODE_DELAY`, if defined. */ -void tap_code(uint8_t code) { tap_code_delay(code, code == KC_CAPS ? TAP_HOLD_CAPS_DELAY : TAP_CODE_DELAY); } +void tap_code(uint8_t code) { tap_code_delay(code, code == KC_CAPS_LOCK ? TAP_HOLD_CAPS_DELAY : TAP_CODE_DELAY); } /** \brief Adds the given physically pressed modifiers and sends a keyboard report immediately. * @@ -1078,7 +1078,7 @@ bool is_tap_action(action_t action) { case ACT_LAYER_TAP: case ACT_LAYER_TAP_EXT: switch (action.layer_tap.code) { - case KC_NO ... KC_RGUI: + case KC_NO ... KC_RIGHT_GUI: case OP_TAP_TOGGLE: case OP_ONESHOT: return true; @@ -1086,7 +1086,7 @@ bool is_tap_action(action_t action) { return false; case ACT_SWAP_HANDS: switch (action.swap.code) { - case KC_NO ... KC_RGUI: + case KC_NO ... KC_RIGHT_GUI: case OP_SH_TAP_TOGGLE: return true; } diff --git a/quantum/keycode.h b/quantum/keycode.h index 8facabd818..38a29b439b 100644 --- a/quantum/keycode.h +++ b/quantum/keycode.h @@ -29,7 +29,7 @@ along with this program. If not, see . #define IS_ERROR(code) (KC_ROLL_OVER <= (code) && (code) <= KC_UNDEFINED) #define IS_ANY(code) (KC_A <= (code) && (code) <= 0xFF) #define IS_KEY(code) (KC_A <= (code) && (code) <= KC_EXSEL) -#define IS_MOD(code) (KC_LCTRL <= (code) && (code) <= KC_RGUI) +#define IS_MOD(code) (KC_LEFT_CTRL <= (code) && (code) <= KC_RIGHT_GUI) #define IS_SPECIAL(code) ((0xA5 <= (code) && (code) <= 0xDF) || (0xE8 <= (code) && (code) <= 0xFF)) #define IS_SYSTEM(code) (KC_PWR <= (code) && (code) <= KC_WAKE) @@ -46,10 +46,10 @@ along with this program. If not, see . #define MOD_BIT(code) (1 << MOD_INDEX(code)) #define MOD_INDEX(code) ((code)&0x07) -#define MOD_MASK_CTRL (MOD_BIT(KC_LCTRL) | MOD_BIT(KC_RCTRL)) -#define MOD_MASK_SHIFT (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) -#define MOD_MASK_ALT (MOD_BIT(KC_LALT) | MOD_BIT(KC_RALT)) -#define MOD_MASK_GUI (MOD_BIT(KC_LGUI) | MOD_BIT(KC_RGUI)) +#define MOD_MASK_CTRL (MOD_BIT(KC_LEFT_CTRL) | MOD_BIT(KC_RIGHT_CTRL)) +#define MOD_MASK_SHIFT (MOD_BIT(KC_LEFT_SHIFT) | MOD_BIT(KC_RIGHT_SHIFT)) +#define MOD_MASK_ALT (MOD_BIT(KC_LEFT_ALT) | MOD_BIT(KC_RIGHT_ALT)) +#define MOD_MASK_GUI (MOD_BIT(KC_LEFT_GUI) | MOD_BIT(KC_RIGHT_GUI)) #define MOD_MASK_CS (MOD_MASK_CTRL | MOD_MASK_SHIFT) #define MOD_MASK_CA (MOD_MASK_CTRL | MOD_MASK_ALT) #define MOD_MASK_CG (MOD_MASK_CTRL | MOD_MASK_GUI) @@ -67,6 +67,8 @@ along with this program. If not, see . #define FN_MIN KC_FN0 #define FN_MAX KC_FN31 +// clang-format off + /* * Short names for ease of definition of keymap */ @@ -75,47 +77,55 @@ along with this program. If not, see . #define KC_TRNS KC_TRANSPARENT /* Punctuation */ -#define KC_ENT KC_ENTER -#define KC_ESC KC_ESCAPE -#define KC_BSPC KC_BSPACE -#define KC_SPC KC_SPACE +#define KC_ENT KC_ENTER +#define KC_ESC KC_ESCAPE +#define KC_BSPC KC_BACKSPACE +#define KC_SPC KC_SPACE #define KC_MINS KC_MINUS -#define KC_EQL KC_EQUAL -#define KC_LBRC KC_LBRACKET -#define KC_RBRC KC_RBRACKET -#define KC_BSLS KC_BSLASH +#define KC_EQL KC_EQUAL +#define KC_LBRC KC_LEFT_BRACKET +#define KC_RBRC KC_RIGHT_BRACKET +#define KC_BSLS KC_BACKSLASH #define KC_NUHS KC_NONUS_HASH -#define KC_SCLN KC_SCOLON +#define KC_SCLN KC_SEMICOLON #define KC_QUOT KC_QUOTE -#define KC_GRV KC_GRAVE +#define KC_GRV KC_GRAVE #define KC_COMM KC_COMMA #define KC_SLSH KC_SLASH -#define KC_NUBS KC_NONUS_BSLASH +#define KC_NUBS KC_NONUS_BACKSLASH /* Lock Keys */ -#define KC_CLCK KC_CAPSLOCK -#define KC_CAPS KC_CAPSLOCK -#define KC_SLCK KC_SCROLLLOCK -#define KC_NLCK KC_NUMLOCK -#define KC_LCAP KC_LOCKING_CAPS -#define KC_LNUM KC_LOCKING_NUM -#define KC_LSCR KC_LOCKING_SCROLL +#define KC_CAPS KC_CAPS_LOCK +#define KC_SCRL KC_SCROLL_LOCK +#define KC_NUM KC_NUM_LOCK +#define KC_LCAP KC_LOCKING_CAPS_LOCK +#define KC_LNUM KC_LOCKING_NUM_LOCK +#define KC_LSCR KC_LOCKING_SCROLL_LOCK /* Commands */ -#define KC_PSCR KC_PSCREEN +#define KC_PSCR KC_PRINT_SCREEN #define KC_PAUS KC_PAUSE -#define KC_BRK KC_PAUSE -#define KC_INS KC_INSERT -#define KC_DEL KC_DELETE -#define KC_PGDN KC_PGDOWN +#define KC_BRK KC_PAUSE +#define KC_INS KC_INSERT +#define KC_PGUP KC_PAGE_UP +#define KC_DEL KC_DELETE +#define KC_PGDN KC_PAGE_DOWN #define KC_RGHT KC_RIGHT -#define KC_APP KC_APPLICATION +#define KC_APP KC_APPLICATION #define KC_EXEC KC_EXECUTE #define KC_SLCT KC_SELECT #define KC_AGIN KC_AGAIN #define KC_PSTE KC_PASTE -#define KC_ERAS KC_ALT_ERASE -#define KC_CLR KC_CLEAR +#define KC_ERAS KC_ALTERNATE_ERASE +#define KC_SYRQ KC_SYSTEM_REQUEST +#define KC_CNCL KC_CANCEL +#define KC_CLR KC_CLEAR +#define KC_PRIR KC_PRIOR +#define KC_RETN KC_RETURN +#define KC_SEPR KC_SEPARATOR +#define KC_CLAG KC_CLEAR_AGAIN +#define KC_CRSL KC_CRSEL +#define KC_EXSL KC_EXSEL /* Keypad */ #define KC_PSLS KC_KP_SLASH @@ -123,47 +133,59 @@ along with this program. If not, see . #define KC_PMNS KC_KP_MINUS #define KC_PPLS KC_KP_PLUS #define KC_PENT KC_KP_ENTER -#define KC_P1 KC_KP_1 -#define KC_P2 KC_KP_2 -#define KC_P3 KC_KP_3 -#define KC_P4 KC_KP_4 -#define KC_P5 KC_KP_5 -#define KC_P6 KC_KP_6 -#define KC_P7 KC_KP_7 -#define KC_P8 KC_KP_8 -#define KC_P9 KC_KP_9 -#define KC_P0 KC_KP_0 +#define KC_P1 KC_KP_1 +#define KC_P2 KC_KP_2 +#define KC_P3 KC_KP_3 +#define KC_P4 KC_KP_4 +#define KC_P5 KC_KP_5 +#define KC_P6 KC_KP_6 +#define KC_P7 KC_KP_7 +#define KC_P8 KC_KP_8 +#define KC_P9 KC_KP_9 +#define KC_P0 KC_KP_0 #define KC_PDOT KC_KP_DOT #define KC_PEQL KC_KP_EQUAL #define KC_PCMM KC_KP_COMMA -/* Japanese specific */ -#define KC_ZKHK KC_GRAVE -#define KC_RO KC_INT1 -#define KC_KANA KC_INT2 -#define KC_JYEN KC_INT3 -#define KC_HENK KC_INT4 -#define KC_MHEN KC_INT5 - -/* Korean specific */ -#define KC_HAEN KC_LANG1 -#define KC_HANJ KC_LANG2 +/* Language Specific */ +#define KC_INT1 KC_INTERNATIONAL_1 +#define KC_INT2 KC_INTERNATIONAL_2 +#define KC_INT3 KC_INTERNATIONAL_3 +#define KC_INT4 KC_INTERNATIONAL_4 +#define KC_INT5 KC_INTERNATIONAL_5 +#define KC_INT6 KC_INTERNATIONAL_6 +#define KC_INT7 KC_INTERNATIONAL_7 +#define KC_INT8 KC_INTERNATIONAL_8 +#define KC_INT9 KC_INTERNATIONAL_9 +#define KC_LNG1 KC_LANGUAGE_1 +#define KC_LNG2 KC_LANGUAGE_2 +#define KC_LNG3 KC_LANGUAGE_3 +#define KC_LNG4 KC_LANGUAGE_4 +#define KC_LNG5 KC_LANGUAGE_5 +#define KC_LNG6 KC_LANGUAGE_6 +#define KC_LNG7 KC_LANGUAGE_7 +#define KC_LNG8 KC_LANGUAGE_8 +#define KC_LNG9 KC_LANGUAGE_9 /* Modifiers */ -#define KC_LCTL KC_LCTRL -#define KC_LSFT KC_LSHIFT -#define KC_LOPT KC_LALT -#define KC_LCMD KC_LGUI -#define KC_LWIN KC_LGUI -#define KC_RCTL KC_RCTRL -#define KC_RSFT KC_RSHIFT -#define KC_ALGR KC_RALT -#define KC_ROPT KC_RALT -#define KC_RCMD KC_RGUI -#define KC_RWIN KC_RGUI +#define KC_LCTL KC_LEFT_CTRL +#define KC_LSFT KC_LEFT_SHIFT +#define KC_LALT KC_LEFT_ALT +#define KC_LOPT KC_LEFT_ALT +#define KC_LGUI KC_LEFT_GUI +#define KC_LCMD KC_LEFT_GUI +#define KC_LWIN KC_LEFT_GUI +#define KC_RCTL KC_RIGHT_CTRL +#define KC_RSFT KC_RIGHT_SHIFT +#define KC_RALT KC_RIGHT_ALT +#define KC_ALGR KC_RIGHT_ALT +#define KC_ROPT KC_RIGHT_ALT +#define KC_RGUI KC_RIGHT_GUI +#define KC_RCMD KC_RIGHT_GUI +#define KC_RWIN KC_RIGHT_GUI /* Generic Desktop Page (0x01) */ -#define KC_PWR KC_SYSTEM_POWER +#define KC_PWR KC_SYSTEM_POWER #define KC_SLEP KC_SYSTEM_SLEEP #define KC_WAKE KC_SYSTEM_WAKE @@ -193,7 +215,7 @@ along with this program. If not, see . /* System Specific */ #define KC_BRMU KC_PAUSE -#define KC_BRMD KC_SCROLLLOCK +#define KC_BRMD KC_SCROLL_LOCK /* Mouse Keys */ #define KC_MS_U KC_MS_UP @@ -216,6 +238,8 @@ along with this program. If not, see . #define KC_ACL1 KC_MS_ACCEL1 #define KC_ACL2 KC_MS_ACCEL2 +// clang-format on + /* Keyboard/Keypad Page (0x07) */ enum hid_keyboard_keypad_usage { KC_NO = 0x00, @@ -260,22 +284,22 @@ enum hid_keyboard_keypad_usage { KC_0, KC_ENTER, KC_ESCAPE, - KC_BSPACE, + KC_BACKSPACE, KC_TAB, KC_SPACE, KC_MINUS, KC_EQUAL, - KC_LBRACKET, - KC_RBRACKET, // 0x30 - KC_BSLASH, + KC_LEFT_BRACKET, + KC_RIGHT_BRACKET, // 0x30 + KC_BACKSLASH, KC_NONUS_HASH, - KC_SCOLON, + KC_SEMICOLON, KC_QUOTE, KC_GRAVE, KC_COMMA, KC_DOT, KC_SLASH, - KC_CAPSLOCK, + KC_CAPS_LOCK, KC_F1, KC_F2, KC_F3, @@ -288,20 +312,20 @@ enum hid_keyboard_keypad_usage { KC_F10, KC_F11, KC_F12, - KC_PSCREEN, - KC_SCROLLLOCK, + KC_PRINT_SCREEN, + KC_SCROLL_LOCK, KC_PAUSE, KC_INSERT, KC_HOME, - KC_PGUP, + KC_PAGE_UP, KC_DELETE, KC_END, - KC_PGDOWN, + KC_PAGE_DOWN, KC_RIGHT, KC_LEFT, // 0x50 KC_DOWN, KC_UP, - KC_NUMLOCK, + KC_NUM_LOCK, KC_KP_SLASH, KC_KP_ASTERISK, KC_KP_MINUS, @@ -318,9 +342,9 @@ enum hid_keyboard_keypad_usage { KC_KP_9, KC_KP_0, KC_KP_DOT, - KC_NONUS_BSLASH, + KC_NONUS_BACKSLASH, KC_APPLICATION, - KC_POWER, + KC_KB_POWER, KC_KP_EQUAL, KC_F13, KC_F14, @@ -345,34 +369,34 @@ enum hid_keyboard_keypad_usage { KC_COPY, KC_PASTE, KC_FIND, - KC__MUTE, - KC__VOLUP, // 0x80 - KC__VOLDOWN, - KC_LOCKING_CAPS, - KC_LOCKING_NUM, - KC_LOCKING_SCROLL, + KC_KB_MUTE, + KC_KB_VOLUME_UP, // 0x80 + KC_KB_VOLUME_DOWN, + KC_LOCKING_CAPS_LOCK, + KC_LOCKING_NUM_LOCK, + KC_LOCKING_SCROLL_LOCK, KC_KP_COMMA, KC_KP_EQUAL_AS400, - KC_INT1, - KC_INT2, - KC_INT3, - KC_INT4, - KC_INT5, - KC_INT6, - KC_INT7, - KC_INT8, - KC_INT9, - KC_LANG1, // 0x90 - KC_LANG2, - KC_LANG3, - KC_LANG4, - KC_LANG5, - KC_LANG6, - KC_LANG7, - KC_LANG8, - KC_LANG9, - KC_ALT_ERASE, - KC_SYSREQ, + KC_INTERNATIONAL_1, + KC_INTERNATIONAL_2, + KC_INTERNATIONAL_3, + KC_INTERNATIONAL_4, + KC_INTERNATIONAL_5, + KC_INTERNATIONAL_6, + KC_INTERNATIONAL_7, + KC_INTERNATIONAL_8, + KC_INTERNATIONAL_9, + KC_LANGUAGE_1, // 0x90 + KC_LANGUAGE_2, + KC_LANGUAGE_3, + KC_LANGUAGE_4, + KC_LANGUAGE_5, + KC_LANGUAGE_6, + KC_LANGUAGE_7, + KC_LANGUAGE_8, + KC_LANGUAGE_9, + KC_ALTERNATE_ERASE, + KC_SYSTEM_REQUEST, KC_CANCEL, KC_CLEAR, KC_PRIOR, @@ -397,12 +421,12 @@ enum hid_keyboard_keypad_usage { KC_DECIMAL_SEPARATOR, KC_CURRENCY_UNIT, KC_CURRENCY_SUB_UNIT, - KC_KP_LPAREN, - KC_KP_RPAREN, - KC_KP_LCBRACKET, - KC_KP_RCBRACKET, + KC_KP_LEFT_PARENTHESIS, + KC_KP_RIGHT_PARENTHESIS, + KC_KP_LEFT_BRACE, + KC_KP_RIGHT_BRACE, KC_KP_TAB, - KC_KP_BSPACE, + KC_KP_BACKSPACE, KC_KP_A, KC_KP_B, KC_KP_C, @@ -411,17 +435,17 @@ enum hid_keyboard_keypad_usage { KC_KP_F, KC_KP_XOR, KC_KP_HAT, - KC_KP_PERC, - KC_KP_LT, - KC_KP_GT, + KC_KP_PERCENT, + KC_KP_LESS_THAN, + KC_KP_GREATER_THAN, KC_KP_AND, - KC_KP_LAZYAND, + KC_KP_LAZY_AND, KC_KP_OR, - KC_KP_LAZYOR, + KC_KP_LAZY_OR, KC_KP_COLON, KC_KP_HASH, KC_KP_SPACE, - KC_KP_ATMARK, + KC_KP_AT, KC_KP_EXCLAMATION, KC_KP_MEM_STORE, //0xD0 KC_KP_MEM_RECALL, @@ -440,14 +464,14 @@ enum hid_keyboard_keypad_usage { #endif /* Modifiers */ - KC_LCTRL = 0xE0, - KC_LSHIFT, - KC_LALT, - KC_LGUI, - KC_RCTRL, - KC_RSHIFT, - KC_RALT, - KC_RGUI + KC_LEFT_CTRL = 0xE0, + KC_LEFT_SHIFT, + KC_LEFT_ALT, + KC_LEFT_GUI, + KC_RIGHT_CTRL, + KC_RIGHT_SHIFT, + KC_RIGHT_ALT, + KC_RIGHT_GUI // ********************************************** // * 0xF0-0xFF are unallocated in the HID spec. * @@ -558,3 +582,5 @@ enum mouse_keys { KC_MS_ACCEL1, KC_MS_ACCEL2 // 0xFF }; + +#include "keycode_legacy.h" diff --git a/quantum/keycode_config.c b/quantum/keycode_config.c index f340905eab..dd2a17e242 100644 --- a/quantum/keycode_config.c +++ b/quantum/keycode_config.c @@ -25,89 +25,89 @@ extern keymap_config_t keymap_config; */ uint16_t keycode_config(uint16_t keycode) { switch (keycode) { - case KC_CAPSLOCK: - case KC_LOCKING_CAPS: + case KC_CAPS_LOCK: + case KC_LOCKING_CAPS_LOCK: if (keymap_config.swap_control_capslock || keymap_config.capslock_to_control) { - return KC_LCTL; + return KC_LEFT_CTRL; } return keycode; - case KC_LCTL: + case KC_LEFT_CTRL: if (keymap_config.swap_control_capslock) { - return KC_CAPSLOCK; + return KC_CAPS_LOCK; } if (keymap_config.swap_lctl_lgui) { if (keymap_config.no_gui) { return KC_NO; } - return KC_LGUI; + return KC_LEFT_GUI; } - return KC_LCTL; - case KC_LALT: + return KC_LEFT_CTRL; + case KC_LEFT_ALT: if (keymap_config.swap_lalt_lgui) { if (keymap_config.no_gui) { return KC_NO; } - return KC_LGUI; + return KC_LEFT_GUI; } - return KC_LALT; - case KC_LGUI: + return KC_LEFT_ALT; + case KC_LEFT_GUI: if (keymap_config.swap_lalt_lgui) { - return KC_LALT; + return KC_LEFT_ALT; } if (keymap_config.swap_lctl_lgui) { - return KC_LCTRL; + return KC_LEFT_CTRL; } if (keymap_config.no_gui) { return KC_NO; } - return KC_LGUI; - case KC_RCTL: + return KC_LEFT_GUI; + case KC_RIGHT_CTRL: if (keymap_config.swap_rctl_rgui) { if (keymap_config.no_gui) { return KC_NO; } - return KC_RGUI; + return KC_RIGHT_GUI; } - return KC_RCTL; - case KC_RALT: + return KC_RIGHT_CTRL; + case KC_RIGHT_ALT: if (keymap_config.swap_ralt_rgui) { if (keymap_config.no_gui) { return KC_NO; } - return KC_RGUI; + return KC_RIGHT_GUI; } - return KC_RALT; - case KC_RGUI: + return KC_RIGHT_ALT; + case KC_RIGHT_GUI: if (keymap_config.swap_ralt_rgui) { - return KC_RALT; + return KC_RIGHT_ALT; } if (keymap_config.swap_rctl_rgui) { - return KC_RCTL; + return KC_RIGHT_CTRL; } if (keymap_config.no_gui) { return KC_NO; } - return KC_RGUI; + return KC_RIGHT_GUI; case KC_GRAVE: if (keymap_config.swap_grave_esc) { - return KC_ESC; + return KC_ESCAPE; } return KC_GRAVE; - case KC_ESC: + case KC_ESCAPE: if (keymap_config.swap_grave_esc) { return KC_GRAVE; } - return KC_ESC; - case KC_BSLASH: + return KC_ESCAPE; + case KC_BACKSLASH: if (keymap_config.swap_backslash_backspace) { - return KC_BSPACE; + return KC_BACKSPACE; } - return KC_BSLASH; - case KC_BSPACE: + return KC_BACKSLASH; + case KC_BACKSPACE: if (keymap_config.swap_backslash_backspace) { - return KC_BSLASH; + return KC_BACKSLASH; } - return KC_BSPACE; + return KC_BACKSPACE; default: return keycode; } diff --git a/quantum/keycode_legacy.h b/quantum/keycode_legacy.h new file mode 100644 index 0000000000..0317a05534 --- /dev/null +++ b/quantum/keycode_legacy.h @@ -0,0 +1,53 @@ +#pragma once + +// clang-format off + +// These keycode names have been deprecated + +#define KC_BSPACE KC_BACKSPACE +#define KC_LBRACKET KC_LEFT_BRACKET +#define KC_RBRACKET KC_RIGHT_BRACKET +#define KC_BSLASH KC_BACKSLASH +#define KC_SCOLON KC_SEMICOLON +#define KC_CAPSLOCK KC_CAPS_LOCK +#define KC_PSCREEN KC_PRINT_SCREEN +#define KC_SCROLLLOCK KC_SCROLL_LOCK +#define KC_PGDOWN KC_PAGE_DOWN +#define KC_NUMLOCK KC_NUM_LOCK +#define KC_NONUS_BSLASH KC_NONUS_BACKSLASH +#define KC_POWER KC_KB_POWER +#define KC__MUTE KC_KB_MUTE +#define KC__VOLUP KC_KB_VOLUME_UP +#define KC__VOLDOWN KC_KB_VOLUME_DOWN +#define KC_LOCKING_CAPS KC_LOCKING_CAPS_LOCK +#define KC_LOCKING_NUM KC_LOCKING_NUM_LOCK +#define KC_LOCKING_SCROLL KC_LOCKING_SCROLL_LOCK +#define KC_LANG1 KC_LANGUAGE_1 +#define KC_LANG2 KC_LANGUAGE_2 +#define KC_LANG3 KC_LANGUAGE_3 +#define KC_LANG4 KC_LANGUAGE_4 +#define KC_LANG5 KC_LANGUAGE_5 +#define KC_LANG6 KC_LANGUAGE_6 +#define KC_LANG7 KC_LANGUAGE_7 +#define KC_LANG8 KC_LANGUAGE_8 +#define KC_LANG9 KC_LANGUAGE_9 +#define KC_ALT_ERASE KC_ALTERNATE_ERASE +#define KC_SYSREQ KC_SYSTEM_REQUEST + +#define KC_LCTRL KC_LEFT_CTRL +#define KC_LSHIFT KC_LEFT_SHIFT +#define KC_RCTRL KC_RIGHT_CTRL +#define KC_RSHIFT KC_RIGHT_SHIFT + +#define KC_ZKHK KC_GRAVE +#define KC_RO KC_INTERNATIONAL_1 +#define KC_KANA KC_INTERNATIONAL_2 +#define KC_JYEN KC_INTERNATIONAL_3 +#define KC_HENK KC_INTERNATIONAL_4 +#define KC_MHEN KC_INTERNATIONAL_5 +#define KC_HAEN KC_LANGUAGE_1 +#define KC_HANJ KC_LANGUAGE_2 + +#define KC_CLCK KC_CAPS_LOCK +#define KC_SLCK KC_SCROLL_LOCK +#define KC_NLCK KC_NUM_LOCK diff --git a/quantum/keymap_common.c b/quantum/keymap_common.c index 780c71ab9b..5007f15f11 100644 --- a/quantum/keymap_common.c +++ b/quantum/keymap_common.c @@ -56,7 +56,7 @@ action_t action_for_keycode(uint16_t keycode) { switch (keycode) { case KC_A ... KC_EXSEL: - case KC_LCTRL ... KC_RGUI: + case KC_LEFT_CTRL ... KC_RIGHT_GUI: action.code = ACTION_KEY(keycode); break; #ifdef EXTRAKEY_ENABLE @@ -72,7 +72,7 @@ action_t action_for_keycode(uint16_t keycode) { action.code = ACTION_MOUSEKEY(keycode); break; #endif - case KC_TRNS: + case KC_TRANSPARENT: action.code = ACTION_TRANSPARENT; break; case QK_MODS ... QK_MODS_MAX:; diff --git a/quantum/keymap_extras/keymap_korean.h b/quantum/keymap_extras/keymap_korean.h index 23d235ef09..74be122dad 100644 --- a/quantum/keymap_extras/keymap_korean.h +++ b/quantum/keymap_extras/keymap_korean.h @@ -85,8 +85,8 @@ #define KR_DOT KC_DOT // . #define KR_SLSH KC_SLSH // / // Row 5 -#define KR_HANJ KC_LANG2 // Hanja (한자) -#define KR_HAEN KC_LANG1 // Han ↔ Yeong (한 ↔ 영) +#define KR_HANJ KC_LNG2 // Hanja (한자) +#define KR_HAEN KC_LNG1 // Han ↔ Yeong (한 ↔ 영) /* Shifted symbols * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ diff --git a/quantum/process_keycode/process_auto_shift.c b/quantum/process_keycode/process_auto_shift.c index cc3a974ea8..02af5174f7 100644 --- a/quantum/process_keycode/process_auto_shift.c +++ b/quantum/process_keycode/process_auto_shift.c @@ -67,7 +67,7 @@ static bool autoshift_press(uint16_t keycode, uint16_t now, keyrecord_t *record) register_code(autoshift_lastkey); } else { // Simulate pressing the shift key. - add_weak_mods(MOD_BIT(KC_LSFT)); + add_weak_mods(MOD_BIT(KC_LEFT_SHIFT)); register_code(autoshift_lastkey); } return false; @@ -108,7 +108,7 @@ static void autoshift_end(uint16_t keycode, uint16_t now, bool matrix_trigger) { autoshift_flags.lastshifted = false; } else { // Simulate pressing the shift key. - add_weak_mods(MOD_BIT(KC_LSFT)); + add_weak_mods(MOD_BIT(KC_LEFT_SHIFT)); register_code(autoshift_lastkey); autoshift_flags.lastshifted = true; # if defined(AUTO_SHIFT_REPEAT) && !defined(AUTO_SHIFT_NO_AUTO_REPEAT) @@ -123,7 +123,7 @@ static void autoshift_end(uint16_t keycode, uint16_t now, bool matrix_trigger) { wait_ms(TAP_CODE_DELAY); # endif unregister_code(autoshift_lastkey); - del_weak_mods(MOD_BIT(KC_LSFT)); + del_weak_mods(MOD_BIT(KC_LEFT_SHIFT)); } else { // Release after keyrepeat. unregister_code(keycode); @@ -131,7 +131,7 @@ static void autoshift_end(uint16_t keycode, uint16_t now, bool matrix_trigger) { // This will only fire when the key was the last auto-shiftable // pressed. That prevents aaaaBBBB then releasing a from unshifting // later Bs (if B wasn't auto-shiftable). - del_weak_mods(MOD_BIT(KC_LSFT)); + del_weak_mods(MOD_BIT(KC_LEFT_SHIFT)); } } send_keyboard_report(); // del_weak_mods doesn't send one. @@ -157,14 +157,14 @@ void autoshift_matrix_scan(void) { void autoshift_toggle(void) { autoshift_flags.enabled = !autoshift_flags.enabled; - del_weak_mods(MOD_BIT(KC_LSFT)); + del_weak_mods(MOD_BIT(KC_LEFT_SHIFT)); } void autoshift_enable(void) { autoshift_flags.enabled = true; } void autoshift_disable(void) { autoshift_flags.enabled = false; - del_weak_mods(MOD_BIT(KC_LSFT)); + del_weak_mods(MOD_BIT(KC_LEFT_SHIFT)); } # ifndef AUTO_SHIFT_NO_SETUP @@ -195,7 +195,7 @@ bool process_auto_shift(uint16_t keycode, keyrecord_t *record) { autoshift_end(KC_NO, now, false); } // For pressing another key while keyrepeating shifted autoshift. - del_weak_mods(MOD_BIT(KC_LSFT)); + del_weak_mods(MOD_BIT(KC_LEFT_SHIFT)); switch (keycode) { case KC_ASTG: @@ -244,7 +244,7 @@ __attribute__((weak)) bool get_auto_shifted_key(uint16_t keycode, keyrecord_t *r # ifndef NO_AUTO_SHIFT_SPECIAL case KC_TAB: case KC_MINUS ... KC_SLASH: - case KC_NONUS_BSLASH: + case KC_NONUS_BACKSLASH: # endif return true; } diff --git a/quantum/process_keycode/process_haptic.c b/quantum/process_keycode/process_haptic.c index 466c8e5543..85b2ffcddd 100644 --- a/quantum/process_keycode/process_haptic.c +++ b/quantum/process_keycode/process_haptic.c @@ -31,7 +31,7 @@ __attribute__((weak)) bool get_haptic_enabled_key(uint16_t keycode, keyrecord_t case QK_LAYER_TAP ... QK_LAYER_TAP_MAX: if (record->tap.count == 0) return false; break; - case KC_LCTRL ... KC_RGUI: + case KC_LEFT_CTRL ... KC_RIGHT_GUI: case QK_MOMENTARY ... QK_MOMENTARY_MAX: case QK_LAYER_MOD ... QK_LAYER_MOD_MAX: #endif @@ -44,34 +44,34 @@ __attribute__((weak)) bool get_haptic_enabled_key(uint16_t keycode, keyrecord_t #ifdef NO_HAPTIC_PUNCTUATION case KC_ENTER: case KC_ESCAPE: - case KC_BSPACE: + case KC_BACKSPACE: case KC_SPACE: case KC_MINUS: case KC_EQUAL: - case KC_LBRACKET: - case KC_RBRACKET: - case KC_BSLASH: + case KC_LEFT_BRACKET: + case KC_RIGHT_BRACKET: + case KC_BACKSLASH: case KC_NONUS_HASH: - case KC_SCOLON: + case KC_SEMICOLON: case KC_QUOTE: case KC_GRAVE: case KC_COMMA: case KC_SLASH: case KC_DOT: - case KC_NONUS_BSLASH: + case KC_NONUS_BACKSLASH: #endif #ifdef NO_HAPTIC_LOCKKEYS - case KC_CAPSLOCK: - case KC_SCROLLLOCK: - case KC_NUMLOCK: + case KC_CAPS_LOCK: + case KC_SCROLL_LOCK: + case KC_NUM_LOCK: #endif #ifdef NO_HAPTIC_NAV - case KC_PSCREEN: + case KC_PRINT_SCREEN: case KC_PAUSE: case KC_INSERT: case KC_DELETE: - case KC_PGDOWN: - case KC_PGUP: + case KC_PAGE_DOWN: + case KC_PAGE_UP: case KC_LEFT: case KC_UP: case KC_RIGHT: diff --git a/quantum/process_keycode/process_music.c b/quantum/process_keycode/process_music.c index 2beccbd8f9..6822c5e289 100644 --- a/quantum/process_keycode/process_music.c +++ b/quantum/process_keycode/process_music.c @@ -146,7 +146,7 @@ bool process_music(uint16_t keycode, keyrecord_t *record) { if (music_activated || midi_activated) { if (record->event.pressed) { - if (keycode == KC_LCTL) { // Start recording + if (keycode == KC_LEFT_CTRL) { // Start recording music_all_notes_off(); music_sequence_recording = true; music_sequence_recorded = false; @@ -155,7 +155,7 @@ bool process_music(uint16_t keycode, keyrecord_t *record) { return false; } - if (keycode == KC_LALT) { // Stop recording/playing + if (keycode == KC_LEFT_ALT) { // Stop recording/playing music_all_notes_off(); if (music_sequence_recording) { // was recording music_sequence_recorded = true; @@ -165,7 +165,7 @@ bool process_music(uint16_t keycode, keyrecord_t *record) { return false; } - if (keycode == KC_LGUI && music_sequence_recorded) { // Start playing + if (keycode == KC_LEFT_GUI && music_sequence_recorded) { // Start playing music_all_notes_off(); music_sequence_recording = false; music_sequence_playing = true; diff --git a/quantum/process_keycode/process_printer.c b/quantum/process_keycode/process_printer.c index 7c5e4169a6..82528cc680 100644 --- a/quantum/process_keycode/process_printer.c +++ b/quantum/process_keycode/process_printer.c @@ -31,7 +31,7 @@ uint8_t shifted_numbers[10] = {0x21, 0x40, 0x23, 0x24, 0x25, 0x5E, 0x26, 0x2A, 0 // uint8_t keycode_to_ascii[0xFF][2]; -// keycode_to_ascii[KC_MINS] = {0x2D, 0x5F}; +// keycode_to_ascii[KC_MINUS] = {0x2D, 0x5F}; void print_char(char c) { USB_Disable(); @@ -90,8 +90,8 @@ bool process_printer(uint16_t keycode, keyrecord_t *record) { case KC_PIPE: case KC_TILD: keycode &= 0xFF; - case KC_LSFT: - case KC_RSFT: + case KC_LEFT_SHIFT: + case KC_RIGHT_SHIFT: if (record->event.pressed) { character_shift++; } else { @@ -107,13 +107,13 @@ bool process_printer(uint16_t keycode, keyrecord_t *record) { print_box_string("This is a line of text!"); } return false; - case KC_ESC: + case KC_ESCAPE: if (record->event.pressed) { print_char(0x1B); } return false; break; - case KC_SPC: + case KC_SPACE: if (record->event.pressed) { print_char(0x20); } @@ -139,7 +139,7 @@ bool process_printer(uint16_t keycode, keyrecord_t *record) { } return false; break; - case KC_ENT: + case KC_ENTER: if (record->event.pressed) { if (character_shift) { print_char(0x0C); @@ -149,7 +149,7 @@ bool process_printer(uint16_t keycode, keyrecord_t *record) { } return false; break; - case KC_BSPC: + case KC_BACKSPACE: if (record->event.pressed) { if (character_shift) { print_char(0x18); @@ -169,7 +169,7 @@ bool process_printer(uint16_t keycode, keyrecord_t *record) { } return false; break; - case KC_COMM: + case KC_COMMA: if (record->event.pressed) { if (character_shift) { print_char(0x3C); @@ -179,7 +179,7 @@ bool process_printer(uint16_t keycode, keyrecord_t *record) { } return false; break; - case KC_SLSH: + case KC_SLASH: if (record->event.pressed) { if (character_shift) { print_char(0x3F); @@ -189,7 +189,7 @@ bool process_printer(uint16_t keycode, keyrecord_t *record) { } return false; break; - case KC_QUOT: + case KC_QUOTE: if (record->event.pressed) { if (character_shift) { print_char(0x22); @@ -199,7 +199,7 @@ bool process_printer(uint16_t keycode, keyrecord_t *record) { } return false; break; - case KC_GRV: + case KC_GRAVE: if (record->event.pressed) { if (character_shift) { print_char(0x7E); @@ -209,7 +209,7 @@ bool process_printer(uint16_t keycode, keyrecord_t *record) { } return false; break; - case KC_MINS: + case KC_MINUS: if (record->event.pressed) { if (character_shift) { print_char(0x5F); @@ -219,7 +219,7 @@ bool process_printer(uint16_t keycode, keyrecord_t *record) { } return false; break; - case KC_EQL: + case KC_EQUAL: if (record->event.pressed) { if (character_shift) { print_char(0x2B); @@ -229,7 +229,7 @@ bool process_printer(uint16_t keycode, keyrecord_t *record) { } return false; break; - case KC_LBRC: + case KC_LEFT_BRACKET: if (record->event.pressed) { if (character_shift) { print_char(0x7B); @@ -239,7 +239,7 @@ bool process_printer(uint16_t keycode, keyrecord_t *record) { } return false; break; - case KC_RBRC: + case KC_RIGHT_BRACKET: if (record->event.pressed) { if (character_shift) { print_char(0x7D); @@ -249,7 +249,7 @@ bool process_printer(uint16_t keycode, keyrecord_t *record) { } return false; break; - case KC_BSLS: + case KC_BACKSLASH: if (record->event.pressed) { if (character_shift) { print_char(0x7C); diff --git a/quantum/process_keycode/process_printer_bb.c b/quantum/process_keycode/process_printer_bb.c index e482d82591..6c91bd27ef 100644 --- a/quantum/process_keycode/process_printer_bb.c +++ b/quantum/process_keycode/process_printer_bb.c @@ -45,7 +45,7 @@ uint8_t shifted_numbers[10] = {0x21, 0x40, 0x23, 0x24, 0x25, 0x5E, 0x26, 0x2A, 0 // uint8_t keycode_to_ascii[0xFF][2]; -// keycode_to_ascii[KC_MINS] = {0x2D, 0x5F}; +// keycode_to_ascii[KC_MINUS] = {0x2D, 0x5F}; void print_char(char c) { uint8_t b = 8; @@ -84,8 +84,8 @@ bool process_printer(uint16_t keycode, keyrecord_t *record) { case KC_PIPE: case KC_TILD: keycode &= 0xFF; - case KC_LSFT: - case KC_RSFT: + case KC_LEFT_SHIFT: + case KC_RIGHT_SHIFT: if (record->event.pressed) { character_shift++; } else { @@ -101,13 +101,13 @@ bool process_printer(uint16_t keycode, keyrecord_t *record) { print_string("This is a line of text!\n\n\n"); } return false; - case KC_ESC: + case KC_ESCAPE: if (record->event.pressed) { print_char(0x1B); } return false; break; - case KC_SPC: + case KC_SPACE: if (record->event.pressed) { print_char(0x20); } @@ -133,7 +133,7 @@ bool process_printer(uint16_t keycode, keyrecord_t *record) { } return false; break; - case KC_ENT: + case KC_ENTER: if (record->event.pressed) { if (character_shift) { print_char(0x0C); @@ -143,7 +143,7 @@ bool process_printer(uint16_t keycode, keyrecord_t *record) { } return false; break; - case KC_BSPC: + case KC_BACKSPACE: if (record->event.pressed) { if (character_shift) { print_char(0x18); @@ -163,7 +163,7 @@ bool process_printer(uint16_t keycode, keyrecord_t *record) { } return false; break; - case KC_COMM: + case KC_COMMA: if (record->event.pressed) { if (character_shift) { print_char(0x3C); @@ -173,7 +173,7 @@ bool process_printer(uint16_t keycode, keyrecord_t *record) { } return false; break; - case KC_SLSH: + case KC_SLASH: if (record->event.pressed) { if (character_shift) { print_char(0x3F); @@ -183,7 +183,7 @@ bool process_printer(uint16_t keycode, keyrecord_t *record) { } return false; break; - case KC_QUOT: + case KC_QUOTE: if (record->event.pressed) { if (character_shift) { print_char(0x22); @@ -193,7 +193,7 @@ bool process_printer(uint16_t keycode, keyrecord_t *record) { } return false; break; - case KC_GRV: + case KC_GRAVE: if (record->event.pressed) { if (character_shift) { print_char(0x7E); @@ -203,7 +203,7 @@ bool process_printer(uint16_t keycode, keyrecord_t *record) { } return false; break; - case KC_MINS: + case KC_MINUS: if (record->event.pressed) { if (character_shift) { print_char(0x5F); @@ -213,7 +213,7 @@ bool process_printer(uint16_t keycode, keyrecord_t *record) { } return false; break; - case KC_EQL: + case KC_EQUAL: if (record->event.pressed) { if (character_shift) { print_char(0x2B); @@ -223,7 +223,7 @@ bool process_printer(uint16_t keycode, keyrecord_t *record) { } return false; break; - case KC_LBRC: + case KC_LEFT_BRACKET: if (record->event.pressed) { if (character_shift) { print_char(0x7B); @@ -233,7 +233,7 @@ bool process_printer(uint16_t keycode, keyrecord_t *record) { } return false; break; - case KC_RBRC: + case KC_RIGHT_BRACKET: if (record->event.pressed) { if (character_shift) { print_char(0x7D); @@ -243,7 +243,7 @@ bool process_printer(uint16_t keycode, keyrecord_t *record) { } return false; break; - case KC_BSLS: + case KC_BACKSLASH: if (record->event.pressed) { if (character_shift) { print_char(0x7C); diff --git a/quantum/process_keycode/process_space_cadet.c b/quantum/process_keycode/process_space_cadet.c index f99db2a87b..46b2648c35 100644 --- a/quantum/process_keycode/process_space_cadet.c +++ b/quantum/process_keycode/process_space_cadet.c @@ -27,53 +27,53 @@ // Shift / Enter setup #ifndef SFTENT_KEY -# define SFTENT_KEY KC_ENT +# define SFTENT_KEY KC_ENTER #endif #ifdef DISABLE_SPACE_CADET_MODIFIER # ifndef LSPO_MOD -# define LSPO_MOD KC_TRNS +# define LSPO_MOD KC_TRANSPARENT # endif # ifndef RSPC_MOD -# define RSPC_MOD KC_TRNS +# define RSPC_MOD KC_TRANSPARENT # endif #else # ifndef LSPO_MOD -# define LSPO_MOD KC_LSFT +# define LSPO_MOD KC_LEFT_SHIFT # endif # ifndef RSPC_MOD -# define RSPC_MOD KC_RSFT +# define RSPC_MOD KC_RIGHT_SHIFT # endif #endif // ********************************************************** // Shift / paren setup #ifndef LSPO_KEYS -# define LSPO_KEYS KC_LSFT, LSPO_MOD, LSPO_KEY +# define LSPO_KEYS KC_LEFT_SHIFT, LSPO_MOD, LSPO_KEY #endif #ifndef RSPC_KEYS -# define RSPC_KEYS KC_RSFT, RSPC_MOD, RSPC_KEY +# define RSPC_KEYS KC_RIGHT_SHIFT, RSPC_MOD, RSPC_KEY #endif // Control / paren setup #ifndef LCPO_KEYS -# define LCPO_KEYS KC_LCTL, KC_LSFT, KC_9 +# define LCPO_KEYS KC_LEFT_CTRL, KC_LEFT_SHIFT, KC_9 #endif #ifndef RCPC_KEYS -# define RCPC_KEYS KC_RCTL, KC_RSFT, KC_0 +# define RCPC_KEYS KC_RIGHT_CTRL, KC_RIGHT_SHIFT, KC_0 #endif // Alt / paren setup #ifndef LAPO_KEYS -# define LAPO_KEYS KC_LALT, KC_LSFT, KC_9 +# define LAPO_KEYS KC_LEFT_ALT, KC_LEFT_SHIFT, KC_9 #endif #ifndef RAPC_KEYS -# define RAPC_KEYS KC_RALT, KC_RSFT, KC_0 +# define RAPC_KEYS KC_RIGHT_ALT, KC_RIGHT_SHIFT, KC_0 #endif // Shift / Enter setup #ifndef SFTENT_KEYS -# define SFTENT_KEYS KC_RSFT, KC_TRNS, SFTENT_KEY +# define SFTENT_KEYS KC_RIGHT_SHIFT, KC_TRANSPARENT, SFTENT_KEY #endif static uint8_t sc_last = 0; diff --git a/quantum/process_keycode/process_terminal.c b/quantum/process_keycode/process_terminal.c index 7d1eefa9ed..a059f3a521 100644 --- a/quantum/process_keycode/process_terminal.c +++ b/quantum/process_keycode/process_terminal.c @@ -257,12 +257,12 @@ bool process_terminal(uint16_t keycode, keyrecord_t *record) { process_terminal_command(); return false; break; - case KC_ESC: + case KC_ESCAPE: SEND_STRING("\n"); enable_terminal(); return false; break; - case KC_BSPC: + case KC_BACKSPACE: str_len = strlen(buffer); if (str_len > 0) { buffer[str_len - 1] = 0; @@ -284,7 +284,7 @@ bool process_terminal(uint16_t keycode, keyrecord_t *record) { str_len = strlen(buffer); for (int i = 0; i < str_len; ++i) { send_string(SS_TAP(X_BSPACE)); // clear w/e is on the line already - // process_terminal(KC_BSPC,record); + // process_terminal(KC_BACKSPACE,record); } strncpy(buffer, cmd_buffer[current_cmd_buffer_pos], 80); @@ -299,7 +299,7 @@ bool process_terminal(uint16_t keycode, keyrecord_t *record) { str_len = strlen(buffer); for (int i = 0; i < str_len; ++i) { send_string(SS_TAP(X_BSPACE)); // clear w/e is on the line already - // process_terminal(KC_BSPC,record); + // process_terminal(KC_BACKSPACE,record); } strncpy(buffer, cmd_buffer[current_cmd_buffer_pos], 79); @@ -311,7 +311,7 @@ bool process_terminal(uint16_t keycode, keyrecord_t *record) { default: if (keycode <= 58) { char_to_add = 0; - if (get_mods() & (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT))) { + if (get_mods() & (MOD_BIT(KC_LEFT_SHIFT) | MOD_BIT(KC_RIGHT_SHIFT))) { char_to_add = shifted_keycode_to_ascii_lut[keycode]; } else if (get_mods() == 0) { char_to_add = keycode_to_ascii_lut[keycode]; diff --git a/quantum/process_keycode/process_ucis.c b/quantum/process_keycode/process_ucis.c index 12b0aba9bf..d084d2b66c 100644 --- a/quantum/process_keycode/process_ucis.c +++ b/quantum/process_keycode/process_ucis.c @@ -46,7 +46,7 @@ static bool is_uni_seq(char *seq) { return false; } } - return qk_ucis_state.codes[i] == KC_ENT || qk_ucis_state.codes[i] == KC_SPC; + return qk_ucis_state.codes[i] == KC_ENTER || qk_ucis_state.codes[i] == KC_SPACE; } __attribute__((weak)) void qk_ucis_symbol_fallback(void) { @@ -72,7 +72,7 @@ bool process_ucis(uint16_t keycode, keyrecord_t *record) { return true; } - bool special = keycode == KC_SPC || keycode == KC_ENT || keycode == KC_ESC || keycode == KC_BSPC; + bool special = keycode == KC_SPACE || keycode == KC_ENTER || keycode == KC_ESCAPE || keycode == KC_BACKSPACE; if (qk_ucis_state.count >= UCIS_MAX_SYMBOL_LENGTH && !special) { return false; } @@ -81,7 +81,7 @@ bool process_ucis(uint16_t keycode, keyrecord_t *record) { qk_ucis_state.count++; switch (keycode) { - case KC_BSPC: + case KC_BACKSPACE: if (qk_ucis_state.count >= 2) { qk_ucis_state.count -= 2; return true; @@ -90,16 +90,16 @@ bool process_ucis(uint16_t keycode, keyrecord_t *record) { return false; } - case KC_SPC: - case KC_ENT: - case KC_ESC: + case KC_SPACE: + case KC_ENTER: + case KC_ESCAPE: for (uint8_t i = 0; i < qk_ucis_state.count; i++) { - register_code(KC_BSPC); - unregister_code(KC_BSPC); + register_code(KC_BACKSPACE); + unregister_code(KC_BACKSPACE); wait_ms(UNICODE_TYPE_DELAY); } - if (keycode == KC_ESC) { + if (keycode == KC_ESCAPE) { qk_ucis_state.in_progress = false; qk_ucis_cancel(); return false; diff --git a/quantum/process_keycode/process_unicode_common.c b/quantum/process_keycode/process_unicode_common.c index 7853c22c5d..9c82571c7d 100644 --- a/quantum/process_keycode/process_unicode_common.c +++ b/quantum/process_keycode/process_unicode_common.c @@ -87,7 +87,7 @@ __attribute__((weak)) void unicode_input_start(void) { // UNICODE_KEY_LNX (which is usually Ctrl-Shift-U) might not work // correctly in the shifted case. if (unicode_config.input_mode == UC_LNX && unicode_saved_caps_lock) { - tap_code(KC_CAPSLOCK); + tap_code(KC_CAPS_LOCK); } unicode_saved_mods = get_mods(); // Save current mods @@ -103,9 +103,9 @@ __attribute__((weak)) void unicode_input_start(void) { case UC_WIN: // For increased reliability, use numpad keys for inputting digits if (!unicode_saved_num_lock) { - tap_code(KC_NUMLOCK); + tap_code(KC_NUM_LOCK); } - register_code(KC_LALT); + register_code(KC_LEFT_ALT); tap_code(KC_KP_PLUS); break; case UC_WINC: @@ -125,13 +125,13 @@ __attribute__((weak)) void unicode_input_finish(void) { case UC_LNX: tap_code(KC_SPACE); if (unicode_saved_caps_lock) { - tap_code(KC_CAPSLOCK); + tap_code(KC_CAPS_LOCK); } break; case UC_WIN: - unregister_code(KC_LALT); + unregister_code(KC_LEFT_ALT); if (!unicode_saved_num_lock) { - tap_code(KC_NUMLOCK); + tap_code(KC_NUM_LOCK); } break; case UC_WINC: @@ -150,16 +150,16 @@ __attribute__((weak)) void unicode_input_cancel(void) { case UC_LNX: tap_code(KC_ESCAPE); if (unicode_saved_caps_lock) { - tap_code(KC_CAPSLOCK); + tap_code(KC_CAPS_LOCK); } break; case UC_WINC: tap_code(KC_ESCAPE); break; case UC_WIN: - unregister_code(KC_LALT); + unregister_code(KC_LEFT_ALT); if (!unicode_saved_num_lock) { - tap_code(KC_NUMLOCK); + tap_code(KC_NUM_LOCK); } break; } diff --git a/quantum/process_keycode/process_unicode_common.h b/quantum/process_keycode/process_unicode_common.h index c10e171ec3..72defb445e 100644 --- a/quantum/process_keycode/process_unicode_common.h +++ b/quantum/process_keycode/process_unicode_common.h @@ -24,13 +24,13 @@ // Keycodes used for starting Unicode input on different platforms #ifndef UNICODE_KEY_MAC -# define UNICODE_KEY_MAC KC_LALT +# define UNICODE_KEY_MAC KC_LEFT_ALT #endif #ifndef UNICODE_KEY_LNX # define UNICODE_KEY_LNX LCTL(LSFT(KC_U)) #endif #ifndef UNICODE_KEY_WINC -# define UNICODE_KEY_WINC KC_RALT +# define UNICODE_KEY_WINC KC_RIGHT_ALT #endif // Comma-delimited, ordered list of input modes selected for use (e.g. in cycle) diff --git a/quantum/quantum.c b/quantum/quantum.c index ac8857df85..0eca329f08 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -62,15 +62,15 @@ uint8_t extract_mod_bits(uint16_t code) { uint8_t mods_to_send = 0; if (code & QK_RMODS_MIN) { // Right mod flag is set - if (code & QK_LCTL) mods_to_send |= MOD_BIT(KC_RCTL); - if (code & QK_LSFT) mods_to_send |= MOD_BIT(KC_RSFT); - if (code & QK_LALT) mods_to_send |= MOD_BIT(KC_RALT); - if (code & QK_LGUI) mods_to_send |= MOD_BIT(KC_RGUI); + if (code & QK_LCTL) mods_to_send |= MOD_BIT(KC_RIGHT_CTRL); + if (code & QK_LSFT) mods_to_send |= MOD_BIT(KC_RIGHT_SHIFT); + if (code & QK_LALT) mods_to_send |= MOD_BIT(KC_RIGHT_ALT); + if (code & QK_LGUI) mods_to_send |= MOD_BIT(KC_RIGHT_GUI); } else { - if (code & QK_LCTL) mods_to_send |= MOD_BIT(KC_LCTL); - if (code & QK_LSFT) mods_to_send |= MOD_BIT(KC_LSFT); - if (code & QK_LALT) mods_to_send |= MOD_BIT(KC_LALT); - if (code & QK_LGUI) mods_to_send |= MOD_BIT(KC_LGUI); + if (code & QK_LCTL) mods_to_send |= MOD_BIT(KC_LEFT_CTRL); + if (code & QK_LSFT) mods_to_send |= MOD_BIT(KC_LEFT_SHIFT); + if (code & QK_LALT) mods_to_send |= MOD_BIT(KC_LEFT_ALT); + if (code & QK_LGUI) mods_to_send |= MOD_BIT(KC_LEFT_GUI); } return mods_to_send; diff --git a/quantum/quantum_keycodes.h b/quantum/quantum_keycodes.h index 373a31a00d..cde97074d3 100644 --- a/quantum/quantum_keycodes.h +++ b/quantum/quantum_keycodes.h @@ -19,7 +19,7 @@ #include "sequencer.h" // Fillers to make layering more clear -#define _______ KC_TRNS +#define _______ KC_TRANSPARENT #define XXXXXXX KC_NO enum quantum_keycodes { @@ -599,69 +599,67 @@ enum quantum_keycodes { #define MOD_MEH 0x7 // US ANSI shifted keycode aliases -#define KC_TILD LSFT(KC_GRV) // ~ -#define KC_TILDE KC_TILD +#define KC_TILDE LSFT(KC_GRAVE) // ~ +#define KC_TILD KC_TILDE -#define KC_EXLM LSFT(KC_1) // ! -#define KC_EXCLAIM KC_EXLM +#define KC_EXCLAIM LSFT(KC_1) // ! +#define KC_EXLM KC_EXCLAIM #define KC_AT LSFT(KC_2) // @ #define KC_HASH LSFT(KC_3) // # -#define KC_DLR LSFT(KC_4) // $ -#define KC_DOLLAR KC_DLR +#define KC_DOLLAR LSFT(KC_4) // $ +#define KC_DLR KC_DOLLAR -#define KC_PERC LSFT(KC_5) // % -#define KC_PERCENT KC_PERC +#define KC_PERCENT LSFT(KC_5) // % +#define KC_PERC KC_PERCENT -#define KC_CIRC LSFT(KC_6) // ^ -#define KC_CIRCUMFLEX KC_CIRC +#define KC_CIRCUMFLEX LSFT(KC_6) // ^ +#define KC_CIRC KC_CIRCUMFLEX -#define KC_AMPR LSFT(KC_7) // & -#define KC_AMPERSAND KC_AMPR +#define KC_AMPERSAND LSFT(KC_7) // & +#define KC_AMPR KC_AMPERSAND -#define KC_ASTR LSFT(KC_8) // * -#define KC_ASTERISK KC_ASTR +#define KC_ASTERISK LSFT(KC_8) // * +#define KC_ASTR KC_ASTERISK -#define KC_LPRN LSFT(KC_9) // ( -#define KC_LEFT_PAREN KC_LPRN +#define KC_LEFT_PAREN LSFT(KC_9) // ( +#define KC_LPRN KC_LEFT_PAREN -#define KC_RPRN LSFT(KC_0) // ) -#define KC_RIGHT_PAREN KC_RPRN +#define KC_RIGHT_PAREN LSFT(KC_0) // ) +#define KC_RPRN KC_RIGHT_PAREN -#define KC_UNDS LSFT(KC_MINS) // _ -#define KC_UNDERSCORE KC_UNDS +#define KC_UNDERSCORE LSFT(KC_MINUS) // _ +#define KC_UNDS KC_UNDERSCORE -#define KC_PLUS LSFT(KC_EQL) // + +#define KC_PLUS LSFT(KC_EQUAL) // + -#define KC_LCBR LSFT(KC_LBRC) // { -#define KC_LEFT_CURLY_BRACE KC_LCBR +#define KC_LEFT_CURLY_BRACE LSFT(KC_LEFT_BRACKET) // { +#define KC_LCBR KC_LEFT_CURLY_BRACE -#define KC_RCBR LSFT(KC_RBRC) // } -#define KC_RIGHT_CURLY_BRACE KC_RCBR +#define KC_RIGHT_CURLY_BRACE LSFT(KC_RIGHT_BRACKET) // } +#define KC_RCBR KC_RIGHT_CURLY_BRACE -#define KC_LABK LSFT(KC_COMM) // < -#define KC_LEFT_ANGLE_BRACKET KC_LABK +#define KC_LEFT_ANGLE_BRACKET LSFT(KC_COMMA) // < +#define KC_LABK KC_LEFT_ANGLE_BRACKET +#define KC_LT KC_LEFT_ANGLE_BRACKET -#define KC_RABK LSFT(KC_DOT) // > -#define KC_RIGHT_ANGLE_BRACKET KC_RABK +#define KC_RIGHT_ANGLE_BRACKET LSFT(KC_DOT) // > +#define KC_RABK KC_RIGHT_ANGLE_BRACKET +#define KC_GT KC_RIGHT_ANGLE_BRACKET -#define KC_COLN LSFT(KC_SCLN) // : -#define KC_COLON KC_COLN +#define KC_COLON LSFT(KC_SEMICOLON) // : +#define KC_COLN KC_COLON -#define KC_PIPE LSFT(KC_BSLS) // | +#define KC_PIPE LSFT(KC_BACKSLASH) // | -#define KC_LT LSFT(KC_COMM) // < +#define KC_QUESTION LSFT(KC_SLASH) // ? +#define KC_QUES KC_QUESTION -#define KC_GT LSFT(KC_DOT) // > - -#define KC_QUES LSFT(KC_SLSH) // ? -#define KC_QUESTION KC_QUES - -#define KC_DQT LSFT(KC_QUOT) // " -#define KC_DOUBLE_QUOTE KC_DQT -#define KC_DQUO KC_DQT +#define KC_DOUBLE_QUOTE LSFT(KC_QUOTE) // " +#define KC_DQUO KC_DOUBLE_QUOTE +#define KC_DQT KC_DOUBLE_QUOTE #define KC_DELT KC_DELETE // Del key (four letter code) diff --git a/quantum/via_ensure_keycode.h b/quantum/via_ensure_keycode.h index a9c1b8ba5d..1aba0cdd2a 100644 --- a/quantum/via_ensure_keycode.h +++ b/quantum/via_ensure_keycode.h @@ -5,362 +5,338 @@ #ifndef VIA_HAS_BROKEN_KEYCODES -_Static_assert(KC_NO == 0, ""); -_Static_assert(KC_TRNS == 1, ""); +// clang-format off -_Static_assert(KC_A == 0x04, ""); -_Static_assert(KC_B == 0x05, ""); -_Static_assert(KC_C == 0x06, ""); -_Static_assert(KC_D == 0x07, ""); -_Static_assert(KC_E == 0x08, ""); -_Static_assert(KC_F == 0x09, ""); -_Static_assert(KC_G == 0x0A, ""); -_Static_assert(KC_H == 0x0B, ""); -_Static_assert(KC_I == 0x0C, ""); -_Static_assert(KC_J == 0x0D, ""); -_Static_assert(KC_K == 0x0E, ""); -_Static_assert(KC_L == 0x0F, ""); -_Static_assert(KC_M == 0x10, ""); -_Static_assert(KC_N == 0x11, ""); -_Static_assert(KC_O == 0x12, ""); -_Static_assert(KC_P == 0x13, ""); -_Static_assert(KC_Q == 0x14, ""); -_Static_assert(KC_R == 0x15, ""); -_Static_assert(KC_S == 0x16, ""); -_Static_assert(KC_T == 0x17, ""); -_Static_assert(KC_U == 0x18, ""); -_Static_assert(KC_V == 0x19, ""); -_Static_assert(KC_W == 0x1A, ""); -_Static_assert(KC_X == 0x1B, ""); -_Static_assert(KC_Y == 0x1C, ""); -_Static_assert(KC_Z == 0x1D, ""); -_Static_assert(KC_1 == 0x1E, ""); -_Static_assert(KC_2 == 0x1F, ""); -_Static_assert(KC_3 == 0x20, ""); -_Static_assert(KC_4 == 0x21, ""); -_Static_assert(KC_5 == 0x22, ""); -_Static_assert(KC_6 == 0x23, ""); -_Static_assert(KC_7 == 0x24, ""); -_Static_assert(KC_8 == 0x25, ""); -_Static_assert(KC_9 == 0x26, ""); -_Static_assert(KC_0 == 0x27, ""); -_Static_assert(KC_ENTER == 0x28, ""); -_Static_assert(KC_ESCAPE == 0x29, ""); -_Static_assert(KC_BSPACE == 0x2A, ""); -_Static_assert(KC_TAB == 0x2B, ""); -_Static_assert(KC_SPACE == 0x2C, ""); -_Static_assert(KC_MINUS == 0x2D, ""); -_Static_assert(KC_EQUAL == 0x2E, ""); -_Static_assert(KC_LBRACKET == 0x2F, ""); -_Static_assert(KC_RBRACKET == 0x30, ""); -_Static_assert(KC_BSLASH == 0x31, ""); -_Static_assert(KC_SCOLON == 0x33, ""); -_Static_assert(KC_QUOTE == 0x34, ""); -_Static_assert(KC_GRAVE == 0x35, ""); -_Static_assert(KC_COMMA == 0x36, ""); -_Static_assert(KC_DOT == 0x37, ""); -_Static_assert(KC_SLASH == 0x38, ""); -_Static_assert(KC_CAPSLOCK == 0x39, ""); -_Static_assert(KC_F1 == 0x3A, ""); -_Static_assert(KC_F2 == 0x3B, ""); -_Static_assert(KC_F3 == 0x3C, ""); -_Static_assert(KC_F4 == 0x3D, ""); -_Static_assert(KC_F5 == 0x3E, ""); -_Static_assert(KC_F6 == 0x3F, ""); -_Static_assert(KC_F7 == 0x40, ""); -_Static_assert(KC_F8 == 0x41, ""); -_Static_assert(KC_F9 == 0x42, ""); -_Static_assert(KC_F10 == 0x43, ""); -_Static_assert(KC_F11 == 0x44, ""); -_Static_assert(KC_F12 == 0x45, ""); -_Static_assert(KC_PSCREEN == 0x46, ""); -_Static_assert(KC_SCROLLLOCK == 0x47, ""); -_Static_assert(KC_PAUSE == 0x48, ""); -_Static_assert(KC_INSERT == 0x49, ""); -_Static_assert(KC_HOME == 0x4A, ""); -_Static_assert(KC_PGUP == 0x4B, ""); -_Static_assert(KC_DELETE == 0x4C, ""); -_Static_assert(KC_END == 0x4D, ""); -_Static_assert(KC_PGDOWN == 0x4E, ""); -_Static_assert(KC_RIGHT == 0x4F, ""); -_Static_assert(KC_LEFT == 0x50, ""); -_Static_assert(KC_DOWN == 0x51, ""); -_Static_assert(KC_UP == 0x52, ""); -_Static_assert(KC_NUMLOCK == 0x53, ""); -_Static_assert(KC_KP_SLASH == 0x54, ""); -_Static_assert(KC_KP_ASTERISK == 0x55, ""); -_Static_assert(KC_KP_MINUS == 0x56, ""); -_Static_assert(KC_KP_PLUS == 0x57, ""); -_Static_assert(KC_KP_ENTER == 0x58, ""); -_Static_assert(KC_KP_1 == 0x59, ""); -_Static_assert(KC_KP_2 == 0x5A, ""); -_Static_assert(KC_KP_3 == 0x5B, ""); -_Static_assert(KC_KP_4 == 0x5C, ""); -_Static_assert(KC_KP_5 == 0x5D, ""); -_Static_assert(KC_KP_6 == 0x5E, ""); -_Static_assert(KC_KP_7 == 0x5F, ""); -_Static_assert(KC_KP_8 == 0x60, ""); -_Static_assert(KC_KP_9 == 0x61, ""); -_Static_assert(KC_KP_0 == 0x62, ""); -_Static_assert(KC_KP_DOT == 0x63, ""); -_Static_assert(KC_APPLICATION == 0x65, ""); -_Static_assert(KC_KP_EQUAL == 0x67, ""); -_Static_assert(KC_KP_COMMA == 0x85, ""); -_Static_assert(KC_LCTRL == 0xE0, ""); -_Static_assert(KC_LSHIFT == 0xE1, ""); -_Static_assert(KC_LALT == 0xE2, ""); -_Static_assert(KC_LGUI == 0xE3, ""); -_Static_assert(KC_RCTRL == 0xE4, ""); -_Static_assert(KC_RSHIFT == 0xE5, ""); -_Static_assert(KC_RALT == 0xE6, ""); -_Static_assert(KC_RGUI == 0xE7, ""); +_Static_assert(KC_NO == 0x0000, ""); +_Static_assert(KC_TRANSPARENT == 0x0001, ""); -_Static_assert(KC_TILD == 0x235, ""); -_Static_assert(KC_EXLM == 0x21E, ""); -_Static_assert(KC_AT == 0x21F, ""); -_Static_assert(KC_HASH == 0x220, ""); -_Static_assert(KC_DLR == 0x221, ""); -_Static_assert(KC_PERC == 0x222, ""); -_Static_assert(KC_CIRC == 0x223, ""); -_Static_assert(KC_AMPR == 0x224, ""); -_Static_assert(KC_ASTR == 0x225, ""); -_Static_assert(KC_LPRN == 0x226, ""); -_Static_assert(KC_RPRN == 0x227, ""); -_Static_assert(KC_UNDS == 0x22D, ""); -_Static_assert(KC_PLUS == 0x22E, ""); -_Static_assert(KC_LCBR == 0x22F, ""); -_Static_assert(KC_RCBR == 0x230, ""); -_Static_assert(KC_LT == 0x236, ""); -_Static_assert(KC_GT == 0x237, ""); -_Static_assert(KC_COLN == 0x233, ""); -_Static_assert(KC_PIPE == 0x231, ""); -_Static_assert(KC_QUES == 0x238, ""); -_Static_assert(KC_DQUO == 0x234, ""); +_Static_assert(KC_A == 0x0004, ""); +_Static_assert(KC_B == 0x0005, ""); +_Static_assert(KC_C == 0x0006, ""); +_Static_assert(KC_D == 0x0007, ""); +_Static_assert(KC_E == 0x0008, ""); +_Static_assert(KC_F == 0x0009, ""); +_Static_assert(KC_G == 0x000A, ""); +_Static_assert(KC_H == 0x000B, ""); +_Static_assert(KC_I == 0x000C, ""); +_Static_assert(KC_J == 0x000D, ""); +_Static_assert(KC_K == 0x000E, ""); +_Static_assert(KC_L == 0x000F, ""); +_Static_assert(KC_M == 0x0010, ""); +_Static_assert(KC_N == 0x0011, ""); +_Static_assert(KC_O == 0x0012, ""); +_Static_assert(KC_P == 0x0013, ""); +_Static_assert(KC_Q == 0x0014, ""); +_Static_assert(KC_R == 0x0015, ""); +_Static_assert(KC_S == 0x0016, ""); +_Static_assert(KC_T == 0x0017, ""); +_Static_assert(KC_U == 0x0018, ""); +_Static_assert(KC_V == 0x0019, ""); +_Static_assert(KC_W == 0x001A, ""); +_Static_assert(KC_X == 0x001B, ""); +_Static_assert(KC_Y == 0x001C, ""); +_Static_assert(KC_Z == 0x001D, ""); +_Static_assert(KC_1 == 0x001E, ""); +_Static_assert(KC_2 == 0x001F, ""); +_Static_assert(KC_3 == 0x0020, ""); +_Static_assert(KC_4 == 0x0021, ""); +_Static_assert(KC_5 == 0x0022, ""); +_Static_assert(KC_6 == 0x0023, ""); +_Static_assert(KC_7 == 0x0024, ""); +_Static_assert(KC_8 == 0x0025, ""); +_Static_assert(KC_9 == 0x0026, ""); +_Static_assert(KC_0 == 0x0027, ""); +_Static_assert(KC_ENTER == 0x0028, ""); +_Static_assert(KC_ESCAPE == 0x0029, ""); +_Static_assert(KC_BACKSPACE == 0x002A, ""); +_Static_assert(KC_TAB == 0x002B, ""); +_Static_assert(KC_SPACE == 0x002C, ""); +_Static_assert(KC_MINUS == 0x002D, ""); +_Static_assert(KC_EQUAL == 0x002E, ""); +_Static_assert(KC_LEFT_BRACKET == 0x002F, ""); +_Static_assert(KC_RIGHT_BRACKET == 0x0030, ""); +_Static_assert(KC_BACKSLASH == 0x0031, ""); +_Static_assert(KC_NONUS_HASH == 0x0032, ""); +_Static_assert(KC_SEMICOLON == 0x0033, ""); +_Static_assert(KC_QUOTE == 0x0034, ""); +_Static_assert(KC_GRAVE == 0x0035, ""); +_Static_assert(KC_COMMA == 0x0036, ""); +_Static_assert(KC_DOT == 0x0037, ""); +_Static_assert(KC_SLASH == 0x0038, ""); +_Static_assert(KC_CAPS_LOCK == 0x0039, ""); +_Static_assert(KC_F1 == 0x003A, ""); +_Static_assert(KC_F2 == 0x003B, ""); +_Static_assert(KC_F3 == 0x003C, ""); +_Static_assert(KC_F4 == 0x003D, ""); +_Static_assert(KC_F5 == 0x003E, ""); +_Static_assert(KC_F6 == 0x003F, ""); +_Static_assert(KC_F7 == 0x0040, ""); +_Static_assert(KC_F8 == 0x0041, ""); +_Static_assert(KC_F9 == 0x0042, ""); +_Static_assert(KC_F10 == 0x0043, ""); +_Static_assert(KC_F11 == 0x0044, ""); +_Static_assert(KC_F12 == 0x0045, ""); +_Static_assert(KC_PRINT_SCREEN == 0x0046, ""); +_Static_assert(KC_SCROLL_LOCK == 0x0047, ""); +_Static_assert(KC_PAUSE == 0x0048, ""); +_Static_assert(KC_INSERT == 0x0049, ""); +_Static_assert(KC_HOME == 0x004A, ""); +_Static_assert(KC_PAGE_UP == 0x004B, ""); +_Static_assert(KC_DELETE == 0x004C, ""); +_Static_assert(KC_END == 0x004D, ""); +_Static_assert(KC_PAGE_DOWN == 0x004E, ""); +_Static_assert(KC_RIGHT == 0x004F, ""); +_Static_assert(KC_LEFT == 0x0050, ""); +_Static_assert(KC_DOWN == 0x0051, ""); +_Static_assert(KC_UP == 0x0052, ""); +_Static_assert(KC_NUM_LOCK == 0x0053, ""); +_Static_assert(KC_KP_SLASH == 0x0054, ""); +_Static_assert(KC_KP_ASTERISK == 0x0055, ""); +_Static_assert(KC_KP_MINUS == 0x0056, ""); +_Static_assert(KC_KP_PLUS == 0x0057, ""); +_Static_assert(KC_KP_ENTER == 0x0058, ""); +_Static_assert(KC_KP_1 == 0x0059, ""); +_Static_assert(KC_KP_2 == 0x005A, ""); +_Static_assert(KC_KP_3 == 0x005B, ""); +_Static_assert(KC_KP_4 == 0x005C, ""); +_Static_assert(KC_KP_5 == 0x005D, ""); +_Static_assert(KC_KP_6 == 0x005E, ""); +_Static_assert(KC_KP_7 == 0x005F, ""); +_Static_assert(KC_KP_8 == 0x0060, ""); +_Static_assert(KC_KP_9 == 0x0061, ""); +_Static_assert(KC_KP_0 == 0x0062, ""); +_Static_assert(KC_KP_DOT == 0x0063, ""); +_Static_assert(KC_NONUS_BACKSLASH == 0x0064, ""); +_Static_assert(KC_APPLICATION == 0x0065, ""); +_Static_assert(KC_KB_POWER == 0x0066, ""); +_Static_assert(KC_KP_EQUAL == 0x0067, ""); +_Static_assert(KC_F13 == 0x0068, ""); +_Static_assert(KC_F14 == 0x0069, ""); +_Static_assert(KC_F15 == 0x006A, ""); +_Static_assert(KC_F16 == 0x006B, ""); +_Static_assert(KC_F17 == 0x006C, ""); +_Static_assert(KC_F18 == 0x006D, ""); +_Static_assert(KC_F19 == 0x006E, ""); +_Static_assert(KC_F20 == 0x006F, ""); +_Static_assert(KC_F21 == 0x0070, ""); +_Static_assert(KC_F22 == 0x0071, ""); +_Static_assert(KC_F23 == 0x0072, ""); +_Static_assert(KC_F24 == 0x0073, ""); +_Static_assert(KC_EXECUTE == 0x0074, ""); +_Static_assert(KC_HELP == 0x0075, ""); +_Static_assert(KC_MENU == 0x0076, ""); +_Static_assert(KC_SELECT == 0x0077, ""); +_Static_assert(KC_STOP == 0x0078, ""); +_Static_assert(KC_AGAIN == 0x0079, ""); +_Static_assert(KC_UNDO == 0x007A, ""); +_Static_assert(KC_CUT == 0x007B, ""); +_Static_assert(KC_COPY == 0x007C, ""); +_Static_assert(KC_PASTE == 0x007D, ""); +_Static_assert(KC_FIND == 0x007E, ""); -_Static_assert(KC_NONUS_HASH == 0x32, ""); -_Static_assert(KC_NONUS_BSLASH == 0x64, ""); -_Static_assert(KC_RO == 0x87, ""); -_Static_assert(KC_KANA == 0x88, ""); -_Static_assert(KC_JYEN == 0x89, ""); -_Static_assert(KC_HENK == 0x8A, ""); -_Static_assert(KC_MHEN == 0x8B, ""); -_Static_assert(KC_LANG1 == 0x90, ""); -_Static_assert(KC_LANG2 == 0x91, ""); +_Static_assert(KC_LOCKING_CAPS_LOCK == 0x0082, ""); +_Static_assert(KC_LOCKING_NUM_LOCK == 0x0083, ""); +_Static_assert(KC_LOCKING_SCROLL_LOCK == 0x0084, ""); +_Static_assert(KC_KP_COMMA == 0x0085, ""); +_Static_assert(KC_KP_EQUAL_AS400 == 0x0086, ""); +_Static_assert(KC_INTERNATIONAL_1 == 0x0087, ""); +_Static_assert(KC_INTERNATIONAL_2 == 0x0088, ""); +_Static_assert(KC_INTERNATIONAL_3 == 0x0089, ""); +_Static_assert(KC_INTERNATIONAL_4 == 0x008A, ""); +_Static_assert(KC_INTERNATIONAL_5 == 0x008B, ""); +_Static_assert(KC_INTERNATIONAL_6 == 0x008C, ""); +_Static_assert(KC_INTERNATIONAL_7 == 0x008D, ""); +_Static_assert(KC_INTERNATIONAL_8 == 0x008E, ""); +_Static_assert(KC_INTERNATIONAL_9 == 0x008F, ""); +_Static_assert(KC_LANGUAGE_1 == 0x0090, ""); +_Static_assert(KC_LANGUAGE_2 == 0x0091, ""); +_Static_assert(KC_LANGUAGE_3 == 0x0092, ""); +_Static_assert(KC_LANGUAGE_4 == 0x0093, ""); +_Static_assert(KC_LANGUAGE_5 == 0x0094, ""); +_Static_assert(KC_LANGUAGE_6 == 0x0095, ""); +_Static_assert(KC_LANGUAGE_7 == 0x0096, ""); +_Static_assert(KC_LANGUAGE_8 == 0x0097, ""); +_Static_assert(KC_LANGUAGE_9 == 0x0098, ""); +_Static_assert(KC_ALTERNATE_ERASE == 0x0099, ""); +_Static_assert(KC_SYSTEM_REQUEST == 0x009A, ""); +_Static_assert(KC_CANCEL == 0x009B, ""); +_Static_assert(KC_CLEAR == 0x009C, ""); +_Static_assert(KC_PRIOR == 0x009D, ""); -_Static_assert(KC_GESC == 0x5C16, ""); -_Static_assert(KC_LSPO == 0x5CD7, ""); -_Static_assert(KC_RSPC == 0x5CD8, ""); -_Static_assert(KC_LCPO == 0x5CF3, ""); -_Static_assert(KC_RCPC == 0x5CF4, ""); -_Static_assert(KC_LAPO == 0x5CF5, ""); -_Static_assert(KC_RAPC == 0x5CF6, ""); -_Static_assert(KC_SFTENT == 0x5CD9, ""); +_Static_assert(KC_OUT == 0x00A0, ""); +_Static_assert(KC_OPER == 0x00A1, ""); +_Static_assert(KC_CLEAR_AGAIN == 0x00A2, ""); +_Static_assert(KC_CRSEL == 0x00A3, ""); +_Static_assert(KC_EXSEL == 0x00A4, ""); -_Static_assert(BL_TOGG == 23743, ""); -_Static_assert(BL_STEP == 23744, ""); -_Static_assert(BL_BRTG == 23745, ""); -_Static_assert(BL_ON == 23739, ""); -_Static_assert(BL_OFF == 23740, ""); -_Static_assert(BL_INC == 23742, ""); -_Static_assert(BL_DEC == 23741, ""); -_Static_assert(RGB_TOG == 23746, ""); -_Static_assert(RGB_MOD == 23747, ""); -_Static_assert(RGB_RMOD == 23748, ""); -_Static_assert(RGB_HUI == 23749, ""); -_Static_assert(RGB_HUD == 23750, ""); -_Static_assert(RGB_SAI == 23751, ""); -_Static_assert(RGB_SAD == 23752, ""); -_Static_assert(RGB_VAI == 23753, ""); -_Static_assert(RGB_VAD == 23754, ""); -_Static_assert(RGB_SPI == 23755, ""); -_Static_assert(RGB_SPD == 23756, ""); -_Static_assert(RGB_M_P == 23757, ""); -_Static_assert(RGB_M_B == 23758, ""); -_Static_assert(RGB_M_R == 23759, ""); -_Static_assert(RGB_M_SW == 23760, ""); -_Static_assert(RGB_M_SN == 23761, ""); -_Static_assert(RGB_M_K == 23762, ""); -_Static_assert(RGB_M_X == 23763, ""); -_Static_assert(RGB_M_G == 23764, ""); -_Static_assert(RGB_M_T == 23765, ""); +_Static_assert(KC_PWR == 0x00A5, ""); +_Static_assert(KC_SLEP == 0x00A6, ""); +_Static_assert(KC_WAKE == 0x00A7, ""); +_Static_assert(KC_MUTE == 0x00A8, ""); +_Static_assert(KC_VOLU == 0x00A9, ""); +_Static_assert(KC_VOLD == 0x00AA, ""); +_Static_assert(KC_MNXT == 0x00AB, ""); +_Static_assert(KC_MPRV == 0x00AC, ""); +_Static_assert(KC_MSTP == 0x00AD, ""); +_Static_assert(KC_MPLY == 0x00AE, ""); +_Static_assert(KC_MSEL == 0x00AF, ""); +_Static_assert(KC_EJCT == 0x00B0, ""); +_Static_assert(KC_MAIL == 0x00B1, ""); +_Static_assert(KC_CALC == 0x00B2, ""); +_Static_assert(KC_MYCM == 0x00B3, ""); +_Static_assert(KC_WSCH == 0x00B4, ""); +_Static_assert(KC_WHOM == 0x00B5, ""); +_Static_assert(KC_WBAK == 0x00B6, ""); +_Static_assert(KC_WFWD == 0x00B7, ""); +_Static_assert(KC_WSTP == 0x00B8, ""); +_Static_assert(KC_WREF == 0x00B9, ""); +_Static_assert(KC_WFAV == 0x00BA, ""); +_Static_assert(KC_MFFD == 0x00BB, ""); +_Static_assert(KC_MRWD == 0x00BC, ""); +_Static_assert(KC_BRIU == 0x00BD, ""); +_Static_assert(KC_BRID == 0x00BE, ""); -_Static_assert(KC_F13 == 104, ""); -_Static_assert(KC_F14 == 105, ""); -_Static_assert(KC_F15 == 106, ""); -_Static_assert(KC_F16 == 107, ""); -_Static_assert(KC_F17 == 108, ""); -_Static_assert(KC_F18 == 109, ""); -_Static_assert(KC_F19 == 110, ""); -_Static_assert(KC_F20 == 111, ""); -_Static_assert(KC_F21 == 112, ""); -_Static_assert(KC_F22 == 113, ""); -_Static_assert(KC_F23 == 114, ""); -_Static_assert(KC_F24 == 115, ""); -_Static_assert(KC_PWR == 165, ""); -_Static_assert(KC_SLEP == 166, ""); -_Static_assert(KC_WAKE == 167, ""); -_Static_assert(KC_EXEC == 116, ""); -_Static_assert(KC_HELP == 117, ""); -_Static_assert(KC_SLCT == 119, ""); -_Static_assert(KC_STOP == 120, ""); -_Static_assert(KC_AGIN == 121, ""); -_Static_assert(KC_UNDO == 122, ""); -_Static_assert(KC_CUT == 123, ""); -_Static_assert(KC_COPY == 124, ""); -_Static_assert(KC_PSTE == 125, ""); -_Static_assert(KC_FIND == 126, ""); -_Static_assert(KC_CALC == 178, ""); -_Static_assert(KC_MAIL == 177, ""); -_Static_assert(KC_MSEL == 175, ""); -_Static_assert(KC_MYCM == 179, ""); -_Static_assert(KC_WSCH == 180, ""); -_Static_assert(KC_WHOM == 181, ""); -_Static_assert(KC_WBAK == 182, ""); -_Static_assert(KC_WFWD == 183, ""); -_Static_assert(KC_WSTP == 184, ""); -_Static_assert(KC_WREF == 185, ""); -_Static_assert(KC_WFAV == 186, ""); -_Static_assert(KC_BRIU == 189, ""); -_Static_assert(KC_BRID == 190, ""); -_Static_assert(KC_MPRV == 172, ""); -_Static_assert(KC_MNXT == 171, ""); -_Static_assert(KC_MUTE == 168, ""); -_Static_assert(KC_VOLD == 170, ""); -_Static_assert(KC_VOLU == 169, ""); -_Static_assert(KC_MSTP == 173, ""); -_Static_assert(KC_MPLY == 174, ""); -_Static_assert(KC_MRWD == 188, ""); -_Static_assert(KC_MFFD == 187, ""); -_Static_assert(KC_EJCT == 176, ""); -_Static_assert(KC_MS_U == 240, ""); -_Static_assert(KC_MS_D == 241, ""); -_Static_assert(KC_MS_L == 242, ""); -_Static_assert(KC_MS_R == 243, ""); -_Static_assert(KC_BTN1 == 244, ""); -_Static_assert(KC_BTN2 == 245, ""); -_Static_assert(KC_BTN3 == 246, ""); -_Static_assert(KC_BTN4 == 247, ""); -_Static_assert(KC_BTN5 == 248, ""); -_Static_assert(KC_WH_U == 249, ""); -_Static_assert(KC_WH_D == 250, ""); -_Static_assert(KC_WH_L == 251, ""); -_Static_assert(KC_WH_R == 252, ""); -_Static_assert(KC_ACL0 == 253, ""); -_Static_assert(KC_ACL1 == 254, ""); -_Static_assert(KC_ACL2 == 255, ""); -_Static_assert(KC_LCAP == 130, ""); -_Static_assert(KC_LNUM == 131, ""); -_Static_assert(KC_LSCR == 132, ""); +_Static_assert(KC_LEFT_CTRL == 0x00E0, ""); +_Static_assert(KC_LEFT_SHIFT == 0x00E1, ""); +_Static_assert(KC_LEFT_ALT == 0x00E2, ""); +_Static_assert(KC_LEFT_GUI == 0x00E3, ""); +_Static_assert(KC_RIGHT_CTRL == 0x00E4, ""); +_Static_assert(KC_RIGHT_SHIFT == 0x00E5, ""); +_Static_assert(KC_RIGHT_ALT == 0x00E6, ""); +_Static_assert(KC_RIGHT_GUI == 0x00E7, ""); -_Static_assert(FN_MO13 == 0x5F10, ""); -_Static_assert(FN_MO23 == 0x5F11, ""); +_Static_assert(KC_MS_U == 0x00F0, ""); +_Static_assert(KC_MS_D == 0x00F1, ""); +_Static_assert(KC_MS_L == 0x00F2, ""); +_Static_assert(KC_MS_R == 0x00F3, ""); +_Static_assert(KC_BTN1 == 0x00F4, ""); +_Static_assert(KC_BTN2 == 0x00F5, ""); +_Static_assert(KC_BTN3 == 0x00F6, ""); +_Static_assert(KC_BTN4 == 0x00F7, ""); +_Static_assert(KC_BTN5 == 0x00F8, ""); +_Static_assert(KC_WH_U == 0x00F9, ""); +_Static_assert(KC_WH_D == 0x00FA, ""); +_Static_assert(KC_WH_L == 0x00FB, ""); +_Static_assert(KC_WH_R == 0x00FC, ""); +_Static_assert(KC_ACL0 == 0x00FD, ""); +_Static_assert(KC_ACL1 == 0x00FE, ""); +_Static_assert(KC_ACL2 == 0x00FF, ""); -_Static_assert(MACRO00 == 0x5F12, ""); -_Static_assert(MACRO01 == 0x5F13, ""); -_Static_assert(MACRO02 == 0x5F14, ""); -_Static_assert(MACRO03 == 0x5F15, ""); -_Static_assert(MACRO04 == 0x5F16, ""); -_Static_assert(MACRO05 == 0x5F17, ""); -_Static_assert(MACRO06 == 0x5F18, ""); -_Static_assert(MACRO07 == 0x5F19, ""); -_Static_assert(MACRO08 == 0x5F1A, ""); -_Static_assert(MACRO09 == 0x5F1B, ""); -_Static_assert(MACRO10 == 0x5F1C, ""); -_Static_assert(MACRO11 == 0x5F1D, ""); -_Static_assert(MACRO12 == 0x5F1E, ""); -_Static_assert(MACRO13 == 0x5F1F, ""); -_Static_assert(MACRO14 == 0x5F20, ""); -_Static_assert(MACRO15 == 0x5F21, ""); +_Static_assert(KC_EXLM == 0x021E, ""); +_Static_assert(KC_AT == 0x021F, ""); +_Static_assert(KC_HASH == 0x0220, ""); +_Static_assert(KC_DLR == 0x0221, ""); +_Static_assert(KC_PERC == 0x0222, ""); +_Static_assert(KC_CIRC == 0x0223, ""); +_Static_assert(KC_AMPR == 0x0224, ""); +_Static_assert(KC_ASTR == 0x0225, ""); +_Static_assert(KC_LPRN == 0x0226, ""); +_Static_assert(KC_RPRN == 0x0227, ""); +_Static_assert(KC_UNDS == 0x022D, ""); +_Static_assert(KC_PLUS == 0x022E, ""); +_Static_assert(KC_LCBR == 0x022F, ""); +_Static_assert(KC_RCBR == 0x0230, ""); +_Static_assert(KC_PIPE == 0x0231, ""); +_Static_assert(KC_COLN == 0x0233, ""); +_Static_assert(KC_DQUO == 0x0234, ""); +_Static_assert(KC_TILD == 0x0235, ""); +_Static_assert(KC_LT == 0x0236, ""); +_Static_assert(KC_GT == 0x0237, ""); +_Static_assert(KC_QUES == 0x0238, ""); -_Static_assert(USER00 == 0x5F80, ""); -_Static_assert(USER01 == 0x5F81, ""); -_Static_assert(USER02 == 0x5F82, ""); -_Static_assert(USER03 == 0x5F83, ""); -_Static_assert(USER04 == 0x5F84, ""); -_Static_assert(USER05 == 0x5F85, ""); -_Static_assert(USER06 == 0x5F86, ""); -_Static_assert(USER07 == 0x5F87, ""); -_Static_assert(USER08 == 0x5F88, ""); -_Static_assert(USER09 == 0x5F89, ""); -_Static_assert(USER10 == 0x5F8A, ""); -_Static_assert(USER11 == 0x5F8B, ""); -_Static_assert(USER12 == 0x5F8C, ""); -_Static_assert(USER13 == 0x5F8D, ""); -_Static_assert(USER14 == 0x5F8E, ""); -_Static_assert(USER15 == 0x5F8F, ""); +_Static_assert(RESET == 0x5C00, ""); +_Static_assert(DEBUG == 0x5C01, ""); -_Static_assert(KC_POWER == 102, ""); -_Static_assert(KC_MENU == 118, ""); -_Static_assert(KC_KP_EQUAL_AS400 == 134, ""); -_Static_assert(KC_INT6 == 140, ""); -_Static_assert(KC_INT7 == 141, ""); -_Static_assert(KC_INT8 == 142, ""); -_Static_assert(KC_INT9 == 143, ""); -_Static_assert(KC_LANG3 == 146, ""); -_Static_assert(KC_LANG4 == 147, ""); -_Static_assert(KC_LANG5 == 148, ""); -_Static_assert(KC_LANG6 == 149, ""); -_Static_assert(KC_LANG7 == 150, ""); -_Static_assert(KC_LANG8 == 151, ""); -_Static_assert(KC_LANG9 == 152, ""); -_Static_assert(KC_ERAS == 153, ""); -_Static_assert(KC_SYSREQ == 154, ""); -_Static_assert(KC_CANCEL == 155, ""); -_Static_assert(KC_CLEAR == 156, ""); -_Static_assert(KC_CLR == 156, ""); -_Static_assert(KC_PRIOR == 157, ""); -_Static_assert(KC_OUT == 160, ""); -_Static_assert(KC_OPER == 161, ""); -_Static_assert(KC_CLEAR_AGAIN == 162, ""); -_Static_assert(KC_CRSEL == 163, ""); -_Static_assert(KC_EXSEL == 164, ""); -_Static_assert(KC_FN0 == 192, ""); -_Static_assert(KC_FN1 == 193, ""); -_Static_assert(KC_FN2 == 194, ""); -_Static_assert(KC_FN3 == 195, ""); -_Static_assert(KC_FN4 == 196, ""); -_Static_assert(KC_FN5 == 197, ""); -_Static_assert(KC_FN6 == 198, ""); -_Static_assert(KC_FN7 == 199, ""); -_Static_assert(KC_FN8 == 200, ""); -_Static_assert(KC_FN9 == 201, ""); -_Static_assert(KC_FN10 == 202, ""); -_Static_assert(KC_FN11 == 203, ""); -_Static_assert(KC_FN12 == 204, ""); -_Static_assert(KC_FN13 == 205, ""); -_Static_assert(KC_FN14 == 206, ""); -_Static_assert(KC_FN15 == 207, ""); -_Static_assert(KC_FN16 == 208, ""); -_Static_assert(KC_FN17 == 209, ""); -_Static_assert(KC_FN18 == 210, ""); -_Static_assert(KC_FN19 == 211, ""); -_Static_assert(KC_FN20 == 212, ""); -_Static_assert(KC_FN21 == 213, ""); -_Static_assert(KC_FN22 == 214, ""); -_Static_assert(KC_FN23 == 215, ""); -_Static_assert(KC_FN24 == 216, ""); -_Static_assert(KC_FN25 == 217, ""); -_Static_assert(KC_FN26 == 218, ""); -_Static_assert(KC_FN27 == 219, ""); -_Static_assert(KC_FN28 == 220, ""); -_Static_assert(KC_FN29 == 221, ""); -_Static_assert(KC_FN30 == 222, ""); -_Static_assert(KC_FN31 == 223, ""); -_Static_assert(RESET == 23552, ""); -_Static_assert(DEBUG == 23553, ""); -_Static_assert(MAGIC_TOGGLE_NKRO == 23572, ""); -_Static_assert(AU_ON == 23581, ""); -_Static_assert(AU_OFF == 23582, ""); -_Static_assert(AU_TOG == 23583, ""); -_Static_assert(CLICKY_TOGGLE == 23584, ""); -_Static_assert(CLICKY_ENABLE == 23585, ""); -_Static_assert(CLICKY_DISABLE == 23586, ""); -_Static_assert(CLICKY_UP == 23587, ""); -_Static_assert(CLICKY_DOWN == 23588, ""); -_Static_assert(CLICKY_RESET == 23589, ""); -_Static_assert(MU_ON == 23590, ""); -_Static_assert(MU_OFF == 23591, ""); -_Static_assert(MU_TOG == 23592, ""); -_Static_assert(MU_MOD == 23593, ""); +_Static_assert(MAGIC_TOGGLE_NKRO == 0x5C14, ""); + +_Static_assert(KC_GESC == 0x5C16, ""); + +_Static_assert(AU_ON == 0x5C1D, ""); +_Static_assert(AU_OFF == 0x5C1E, ""); +_Static_assert(AU_TOG == 0x5C1F, ""); + +_Static_assert(CLICKY_TOGGLE == 0x5C20, ""); +_Static_assert(CLICKY_ENABLE == 0x5C21, ""); +_Static_assert(CLICKY_DISABLE == 0x5C22, ""); +_Static_assert(CLICKY_UP == 0x5C23, ""); +_Static_assert(CLICKY_DOWN == 0x5C24, ""); +_Static_assert(CLICKY_RESET == 0x5C25, ""); +_Static_assert(MU_ON == 0x5C26, ""); +_Static_assert(MU_OFF == 0x5C27, ""); +_Static_assert(MU_TOG == 0x5C28, ""); +_Static_assert(MU_MOD == 0x5C29, ""); + +_Static_assert(BL_ON == 0x5CBB, ""); +_Static_assert(BL_OFF == 0x5CBC, ""); +_Static_assert(BL_DEC == 0x5CBD, ""); +_Static_assert(BL_INC == 0x5CBE, ""); +_Static_assert(BL_TOGG == 0x5CBF, ""); +_Static_assert(BL_STEP == 0x5CC0, ""); +_Static_assert(BL_BRTG == 0x5CC1, ""); +_Static_assert(RGB_TOG == 0x5CC2, ""); +_Static_assert(RGB_MOD == 0x5CC3, ""); +_Static_assert(RGB_RMOD == 0x5CC4, ""); +_Static_assert(RGB_HUI == 0x5CC5, ""); +_Static_assert(RGB_HUD == 0x5CC6, ""); +_Static_assert(RGB_SAI == 0x5CC7, ""); +_Static_assert(RGB_SAD == 0x5CC8, ""); +_Static_assert(RGB_VAI == 0x5CC9, ""); +_Static_assert(RGB_VAD == 0x5CCA, ""); +_Static_assert(RGB_SPI == 0x5CCB, ""); +_Static_assert(RGB_SPD == 0x5CCC, ""); +_Static_assert(RGB_M_P == 0x5CCD, ""); +_Static_assert(RGB_M_B == 0x5CCE, ""); +_Static_assert(RGB_M_R == 0x5CCF, ""); +_Static_assert(RGB_M_SW == 0x5CD0, ""); +_Static_assert(RGB_M_SN == 0x5CD1, ""); +_Static_assert(RGB_M_K == 0x5CD2, ""); +_Static_assert(RGB_M_X == 0x5CD3, ""); +_Static_assert(RGB_M_G == 0x5CD4, ""); +_Static_assert(RGB_M_T == 0x5CD5, ""); + +_Static_assert(KC_LSPO == 0x5CD7, ""); +_Static_assert(KC_RSPC == 0x5CD8, ""); +_Static_assert(KC_SFTENT == 0x5CD9, ""); + +_Static_assert(KC_LCPO == 0x5CF3, ""); +_Static_assert(KC_RCPC == 0x5CF4, ""); +_Static_assert(KC_LAPO == 0x5CF5, ""); +_Static_assert(KC_RAPC == 0x5CF6, ""); + +_Static_assert(FN_MO13 == 0x5F10, ""); +_Static_assert(FN_MO23 == 0x5F11, ""); +_Static_assert(MACRO00 == 0x5F12, ""); +_Static_assert(MACRO01 == 0x5F13, ""); +_Static_assert(MACRO02 == 0x5F14, ""); +_Static_assert(MACRO03 == 0x5F15, ""); +_Static_assert(MACRO04 == 0x5F16, ""); +_Static_assert(MACRO05 == 0x5F17, ""); +_Static_assert(MACRO06 == 0x5F18, ""); +_Static_assert(MACRO07 == 0x5F19, ""); +_Static_assert(MACRO08 == 0x5F1A, ""); +_Static_assert(MACRO09 == 0x5F1B, ""); +_Static_assert(MACRO10 == 0x5F1C, ""); +_Static_assert(MACRO11 == 0x5F1D, ""); +_Static_assert(MACRO12 == 0x5F1E, ""); +_Static_assert(MACRO13 == 0x5F1F, ""); +_Static_assert(MACRO14 == 0x5F20, ""); +_Static_assert(MACRO15 == 0x5F21, ""); + +_Static_assert(USER00 == 0x5F80, ""); +_Static_assert(USER01 == 0x5F81, ""); +_Static_assert(USER02 == 0x5F82, ""); +_Static_assert(USER03 == 0x5F83, ""); +_Static_assert(USER04 == 0x5F84, ""); +_Static_assert(USER05 == 0x5F85, ""); +_Static_assert(USER06 == 0x5F86, ""); +_Static_assert(USER07 == 0x5F87, ""); +_Static_assert(USER08 == 0x5F88, ""); +_Static_assert(USER09 == 0x5F89, ""); +_Static_assert(USER10 == 0x5F8A, ""); +_Static_assert(USER11 == 0x5F8B, ""); +_Static_assert(USER12 == 0x5F8C, ""); +_Static_assert(USER13 == 0x5F8D, ""); +_Static_assert(USER14 == 0x5F8E, ""); +_Static_assert(USER15 == 0x5F8F, ""); #endif diff --git a/quantum/wpm.c b/quantum/wpm.c index e711e9fe73..cad4cefd5d 100644 --- a/quantum/wpm.c +++ b/quantum/wpm.c @@ -56,7 +56,7 @@ __attribute__((weak)) uint8_t wpm_regress_count(uint16_t keycode) { } else if (keycode > 0xFF) { keycode = 0; } - if (keycode == KC_DEL || keycode == KC_BSPC) { + if (keycode == KC_DELETE || keycode == KC_BACKSPACE) { if (((get_mods() | get_oneshot_mods()) & MOD_MASK_CTRL) || weak_modded) { return WPM_ESTIMATED_WORD_SIZE; } else { diff --git a/tests/basic/test_keypress.cpp b/tests/basic/test_keypress.cpp index ecd6e98e44..cf839f8c16 100644 --- a/tests/basic/test_keypress.cpp +++ b/tests/basic/test_keypress.cpp @@ -73,10 +73,10 @@ TEST_F(KeyPress, LeftShiftIsReportedCorrectly) { // See issue #1476 for more information EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_A))); keyboard_task(); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_A, KC_LSFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_A, KC_LEFT_SHIFT))); keyboard_task(); release_key(0, 0); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); keyboard_task(); release_key(3, 0); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); @@ -89,9 +89,9 @@ TEST_F(KeyPress, PressLeftShiftAndControl) { press_key(5, 0); // Unfortunately modifiers are also processed in the wrong order // See issue #1476 for more information - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); keyboard_task(); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_LCTRL))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT, KC_LEFT_CTRL))); keyboard_task(); } @@ -101,9 +101,9 @@ TEST_F(KeyPress, LeftAndRightShiftCanBePressedAtTheSameTime) { press_key(4, 0); // Unfortunately modifiers are also processed in the wrong order // See issue #1476 for more information - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); keyboard_task(); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_RSFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT, KC_RIGHT_SHIFT))); keyboard_task(); } @@ -115,11 +115,11 @@ TEST_F(KeyPress, RightShiftLeftControlAndCharWithTheSameKey) { // See issue #524 for more information // The underlying cause is that we use only one bit to represent the right hand // modifiers. - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RSFT, KC_RCTRL))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RSFT, KC_RCTRL, KC_O))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RIGHT_SHIFT, KC_RIGHT_CTRL))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RIGHT_SHIFT, KC_RIGHT_CTRL, KC_O))); keyboard_task(); release_key(6, 0); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RSFT, KC_RCTRL))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RIGHT_SHIFT, KC_RIGHT_CTRL))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); keyboard_task(); } @@ -129,23 +129,23 @@ TEST_F(KeyPress, PressPlusEqualReleaseBeforePress) { InSequence s; press_key(1, 1); // KC_PLUS - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_EQL))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT, KC_EQUAL))); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); release_key(1, 1); // KC_PLUS - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - press_key(0, 1); // KC_EQL - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_EQL))); + press_key(0, 1); // KC_EQUAL + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_EQUAL))); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - release_key(0, 1); // KC_EQL + release_key(0, 1); // KC_EQUAL EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); @@ -156,25 +156,25 @@ TEST_F(KeyPress, PressPlusEqualDontReleaseBeforePress) { InSequence s; press_key(1, 1); // KC_PLUS - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_EQL))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT, KC_EQUAL))); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - press_key(0, 1); // KC_EQL + press_key(0, 1); // KC_EQUAL EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_EQL))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_EQUAL))); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - release_key(1, 1); // KC_PLS - // BUG: Should really still return KC_EQL, but this is fine too + release_key(1, 1); // KC_PLUS + // BUG: Should really still return KC_EQUAL, but this is fine too // It's also called twice for some reason EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(2); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - release_key(0, 1); // KC_EQL + release_key(0, 1); // KC_EQUAL EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); @@ -184,24 +184,24 @@ TEST_F(KeyPress, PressEqualPlusReleaseBeforePress) { TestDriver driver; InSequence s; - press_key(0, 1); // KC_EQL - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_EQL))); + press_key(0, 1); // KC_EQUAL + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_EQUAL))); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - release_key(0, 1); // KQ_EQL + release_key(0, 1); // KC_EQUAL EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); press_key(1, 1); // KC_PLUS - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_EQL))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT, KC_EQUAL))); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); release_key(1, 1); // KC_PLUS - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); @@ -211,29 +211,29 @@ TEST_F(KeyPress, PressEqualPlusDontReleaseBeforePress) { TestDriver driver; InSequence s; - press_key(0, 1); // KC_EQL - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_EQL))); + press_key(0, 1); // KC_EQUAL + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_EQUAL))); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); press_key(1, 1); // KC_PLUS // BUG: The sequence is a bit strange, but it works, the end result is that // KC_PLUS is sent - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_EQL))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_EQL))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT, KC_EQUAL))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT, KC_EQUAL))); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - release_key(0, 1); // KC_EQL + release_key(0, 1); // KC_EQUAL // I guess it's fine to still report shift here - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); release_key(1, 1); // KC_PLUS // This report is not needed - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); diff --git a/tests/basic/test_macro.cpp b/tests/basic/test_macro.cpp index dc4a77796a..1ac6f473fc 100644 --- a/tests/basic/test_macro.cpp +++ b/tests/basic/test_macro.cpp @@ -29,9 +29,9 @@ TEST_F(Macro, PlayASimpleMacro) { InSequence s; press_key(8, 0); uint32_t current_time = timer_read32(); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))).AT_TIME(0); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_H))).AT_TIME(0); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))).AT_TIME(0); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))).AT_TIME(0); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT, KC_H))).AT_TIME(0); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))).AT_TIME(0); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).AT_TIME(0); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_E))).AT_TIME(0); // The macro system could actually skip these empty keyboard reports @@ -45,9 +45,9 @@ TEST_F(Macro, PlayASimpleMacro) { EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).AT_TIME(0); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_SPACE))).AT_TIME(0); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).AT_TIME(0); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))).AT_TIME(100); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_W))).AT_TIME(100); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))).AT_TIME(100); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))).AT_TIME(100); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT, KC_W))).AT_TIME(100); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))).AT_TIME(100); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).AT_TIME(100); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_O))) // BUG: The timer should not really have advanced 10 ms here @@ -63,9 +63,9 @@ TEST_F(Macro, PlayASimpleMacro) { EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).AT_TIME(160); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_D))).AT_TIME(170); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).AT_TIME(180); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))).AT_TIME(190); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_1))).AT_TIME(200); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))).AT_TIME(210); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))).AT_TIME(190); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT, KC_1))).AT_TIME(200); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))).AT_TIME(210); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).AT_TIME(220); run_one_scan_loop(); } diff --git a/tests/basic/test_tapping.cpp b/tests/basic/test_tapping.cpp index 30d032e9fd..88ab97eb6e 100644 --- a/tests/basic/test_tapping.cpp +++ b/tests/basic/test_tapping.cpp @@ -46,7 +46,7 @@ TEST_F(Tapping, HoldA_SHFT_T_KeyReportsShift) { // Tapping keys does nothing on press EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); idle_for(TAPPING_TERM); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); run_one_scan_loop(); } @@ -92,6 +92,6 @@ TEST_F(Tapping, ANewTapWithinTappingTermIsBuggy) { // If TAPPING_TERM + 1 above is changed to TAPPING_TERM or TAPPING_TERM + 2 it doesn't press_key(7, 0); // Shouldn't be called here really - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))).Times(1); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))).Times(1); idle_for(TAPPING_TERM); } From 8ce69e6a8373abba52411989d16e6bbe8d575097 Mon Sep 17 00:00:00 2001 From: takashicompany Date: Thu, 4 Nov 2021 14:26:18 +0900 Subject: [PATCH 416/595] [Keyboard] Add new keyboard "Compacx" (#14903) Co-authored-by: Joel Challis Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- keyboards/takashicompany/compacx/compacx.c | 28 ++ keyboards/takashicompany/compacx/compacx.h | 46 +++ keyboards/takashicompany/compacx/config.h | 149 +++++++++ keyboards/takashicompany/compacx/info.json | 309 ++++++++++++++++++ .../compacx/keymaps/default/keymap.c | 68 ++++ .../compacx/keymaps/via/config.h | 18 + .../compacx/keymaps/via/keymap.c | 68 ++++ .../compacx/keymaps/via/rules.mk | 1 + keyboards/takashicompany/compacx/readme.md | 29 ++ keyboards/takashicompany/compacx/rules.mk | 23 ++ 10 files changed, 739 insertions(+) create mode 100644 keyboards/takashicompany/compacx/compacx.c create mode 100644 keyboards/takashicompany/compacx/compacx.h create mode 100644 keyboards/takashicompany/compacx/config.h create mode 100644 keyboards/takashicompany/compacx/info.json create mode 100644 keyboards/takashicompany/compacx/keymaps/default/keymap.c create mode 100644 keyboards/takashicompany/compacx/keymaps/via/config.h create mode 100644 keyboards/takashicompany/compacx/keymaps/via/keymap.c create mode 100644 keyboards/takashicompany/compacx/keymaps/via/rules.mk create mode 100644 keyboards/takashicompany/compacx/readme.md create mode 100644 keyboards/takashicompany/compacx/rules.mk diff --git a/keyboards/takashicompany/compacx/compacx.c b/keyboards/takashicompany/compacx/compacx.c new file mode 100644 index 0000000000..cf23638920 --- /dev/null +++ b/keyboards/takashicompany/compacx/compacx.c @@ -0,0 +1,28 @@ +/* Copyright 2021 takashicompany + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "compacx.h" + +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + if (!clockwise) { + tap_code(KC_MS_WH_UP); + } else { + tap_code(KC_MS_WH_DOWN); + } + + return true; +} diff --git a/keyboards/takashicompany/compacx/compacx.h b/keyboards/takashicompany/compacx/compacx.h new file mode 100644 index 0000000000..61447abeb8 --- /dev/null +++ b/keyboards/takashicompany/compacx/compacx.h @@ -0,0 +1,46 @@ +/* Copyright 2021 takashicompany + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + l001, l002, l003, l004, l005, l006, l007, l008, r001, r002, r003, r004, r005, r006, r007, r008, \ + l201, l009, l010, l011, l012, l013, l901, r201, r009, r010, r011, r012, r013, r901, \ + l301, l014, l015, l016, l017, l018, r301, r014, r015, r016, r017, r018, \ + l401, l019, l020, l021, l022, l023, l024, r401, r019, r020, r021, r022, r023, r024, \ + l025, l101, l102, l026, l103, l104, l027, r025, r101, r102, r026, r103, r104, r027 \ +) { \ + { l001, l002, l003, l004, l005, l006, l007 }, \ + { l201, l009, l010, l011, l012, l013, l008 }, \ + { l301, l014, l015, l016, l017, l018, l901 }, \ + { l401, l019, l020, l021, l022, l023, l024 }, \ + { l025, l101, l102, l026, l103, l104, l027 }, \ + { r001, r002, r003, r004, r005, r006, r007 }, \ + { r201, r009, r010, r011, r012, r013, r008 }, \ + { r301, r014, r015, r016, r017, r018, r901 }, \ + { r401, r019, r020, r021, r022, r023, r024 }, \ + { r025, r101, r102, r026, r103, r104, r027 } \ +} diff --git a/keyboards/takashicompany/compacx/config.h b/keyboards/takashicompany/compacx/config.h new file mode 100644 index 0000000000..5428482ed3 --- /dev/null +++ b/keyboards/takashicompany/compacx/config.h @@ -0,0 +1,149 @@ +/* +Copyright 2021 takashicompany + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x7463 // tc = takashicompany +#define PRODUCT_ID 0x0014 +#define DEVICE_VER 0x0001 +#define MANUFACTURER takashicompany +#define PRODUCT Compacx + +/* key matrix size */ +#define MATRIX_ROWS 5 * 2 +#define MATRIX_COLS 7 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { D1, D0, D4, C6, D7 } +#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +#define ENCODER_RESOLUTION 4 +#define ENCODERS_PAD_A { E6, B6 } +#define ENCODERS_PAD_B { B4, B5 } + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +#define SOFT_SERIAL_PIN D2 // or D1, D2, D3, E6 + +//#define LED_NUM_LOCK_PIN B0 +//#define LED_CAPS_LOCK_PIN B1 +//#define LED_SCROLL_LOCK_PIN B2 +//#define LED_COMPOSE_PIN B3 +//#define LED_KANA_PIN B4 + +//#define BACKLIGHT_PIN B7 +//#define BACKLIGHT_LEVELS 3 +//#define BACKLIGHT_BREATHING + +#define RGB_DI_PIN D3 +#ifdef RGB_DI_PIN +# define RGBLED_NUM 12 +# define RGBLED_SPLIT {6, 6} +# define RGBLIGHT_HUE_STEP 8 +# define RGBLIGHT_SAT_STEP 8 +# define RGBLIGHT_VAL_STEP 8 +# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/takashicompany/compacx/info.json b/keyboards/takashicompany/compacx/info.json new file mode 100644 index 0000000000..431579feb1 --- /dev/null +++ b/keyboards/takashicompany/compacx/info.json @@ -0,0 +1,309 @@ +{ + "keyboard_name": "Compacx", + "url": "https://github.com/takashicompany/compacx", + "maintainer": "takashicompany", + "layouts": { + "LAYOUT": { + "layout": [ + { + "x": 0, + "y": 0 + }, + { + "x": 1, + "y": 0 + }, + { + "x": 2, + "y": 0 + }, + { + "x": 3, + "y": 0 + }, + { + "x": 4, + "y": 0 + }, + { + "x": 5, + "y": 0 + }, + { + "x": 6, + "y": 0 + }, + { + "x": 7, + "y": 0 + }, + { + "x": 9, + "y": 0 + }, + { + "x": 10, + "y": 0 + }, + { + "x": 11, + "y": 0 + }, + { + "x": 12, + "y": 0 + }, + { + "x": 13, + "y": 0 + }, + { + "x": 14, + "y": 0 + }, + { + "x": 15, + "y": 0 + }, + { + "x": 16, + "y": 0 + }, + { + "x": 0, + "y": 1, + "w": 1.5 + }, + { + "x": 1.5, + "y": 1 + }, + { + "x": 2.5, + "y": 1 + }, + { + "x": 3.5, + "y": 1 + }, + { + "x": 4.5, + "y": 1 + }, + { + "x": 5.5, + "y": 1 + }, + { + "x": 6.75, + "y": 1, + "w": 1.25, + "h": 2 + }, + { + "x": 9, + "y": 1, + "w": 1.5 + }, + { + "x": 10.5, + "y": 1 + }, + { + "x": 11.5, + "y": 1 + }, + { + "x": 12.5, + "y": 1 + }, + { + "x": 13.5, + "y": 1 + }, + { + "x": 14.5, + "y": 1 + }, + { + "x": 15.75, + "y": 1, + "w": 1.25, + "h": 2 + }, + { + "x": 0, + "y": 2, + "w": 1.75 + }, + { + "x": 1.75, + "y": 2 + }, + { + "x": 2.75, + "y": 2 + }, + { + "x": 3.75, + "y": 2 + }, + { + "x": 4.75, + "y": 2 + }, + { + "x": 5.75, + "y": 2 + }, + { + "x": 9, + "y": 2, + "w": 1.75 + }, + { + "x": 10.75, + "y": 2 + }, + { + "x": 11.75, + "y": 2 + }, + { + "x": 12.75, + "y": 2 + }, + { + "x": 13.75, + "y": 2 + }, + { + "x": 14.75, + "y": 2 + }, + { + "x": 0, + "y": 3, + "w": 2 + }, + { + "x": 2, + "y": 3 + }, + { + "x": 3, + "y": 3 + }, + { + "x": 4, + "y": 3 + }, + { + "x": 5, + "y": 3 + }, + { + "x": 6, + "y": 3 + }, + { + "x": 7, + "y": 3 + }, + { + "x": 9, + "y": 3, + "w": 2 + }, + { + "x": 11, + "y": 3 + }, + { + "x": 12, + "y": 3 + }, + { + "x": 13, + "y": 3 + }, + { + "x": 14, + "y": 3 + }, + { + "x": 15, + "y": 3 + }, + { + "x": 16, + "y": 3 + }, + { + "x": 0, + "y": 4 + }, + { + "x": 1, + "y": 4, + "w": 1.25 + }, + { + "x": 2.25, + "y": 4, + "w": 1.25 + }, + { + "x": 3.5, + "y": 4 + }, + { + "x": 4.5, + "y": 4, + "w": 1.25 + }, + { + "x": 5.75, + "y": 4, + "w": 1.25 + }, + { + "x": 7, + "y": 4 + }, + { + "x": 9, + "y": 4 + }, + { + "x": 10, + "y": 4, + "w": 1.25 + }, + { + "x": 11.25, + "y": 4, + "w": 1.25 + }, + { + "x": 12.5, + "y": 4 + }, + { + "x": 13.5, + "y": 4, + "w": 1.25 + }, + { + "x": 14.75, + "y": 4, + "w": 1.25 + }, + { + "x": 16, + "y": 4 + } + ] + } + } +} \ No newline at end of file diff --git a/keyboards/takashicompany/compacx/keymaps/default/keymap.c b/keyboards/takashicompany/compacx/keymaps/default/keymap.c new file mode 100644 index 0000000000..068f621ff8 --- /dev/null +++ b/keyboards/takashicompany/compacx/keymaps/default/keymap.c @@ -0,0 +1,68 @@ +/* Copyright 2021 takashicompany + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_BSPC, KC_ESC, KC_6, KC_7, KC_8, KC_9, KC_0, KC_JYEN, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_ENT, KC_TAB, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_ENT, + KC_CAPS, KC_A, KC_S, LT(2, KC_D), KC_F, KC_G, KC_RCTL, KC_H, KC_J, KC_K, KC_L, KC_SCLN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_DEL, KC_RSFT, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, + TG(2), LT(3 ,KC_PSCR), KC_LCTL, KC_LGUI, LSFT_T(KC_TAB), LALT_T(KC_LANG2), KC_SPC, KC_SPC, LT(1, KC_LANG1), KC_RALT, KC_RGUI, KC_RCTL, MO(3), KC_DEL + ), + + LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_TRNS, + KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SCLN, KC_QUOT, KC_NUHS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + LAYOUT( + KC_TRNS, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_P7, KC_P8, KC_P9, KC_PPLS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_P4, KC_P5, KC_P6, KC_PCMM, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, + KC_TRNS, KC_P1, KC_P2, KC_P3, KC_PEQL, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_P0, KC_PDOT, KC_PENT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + LAYOUT( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_TRNS, KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, + KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, + KC_TRNS, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, RGB_M_K, RGB_M_X, RGB_M_G, RGB_M_T, RGB_M_T, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; + diff --git a/keyboards/takashicompany/compacx/keymaps/via/config.h b/keyboards/takashicompany/compacx/keymaps/via/config.h new file mode 100644 index 0000000000..d04cb9a0d2 --- /dev/null +++ b/keyboards/takashicompany/compacx/keymaps/via/config.h @@ -0,0 +1,18 @@ +/* Copyright 2021 takashicompany + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#define DYNAMIC_KEYMAP_LAYER_COUNT 6 \ No newline at end of file diff --git a/keyboards/takashicompany/compacx/keymaps/via/keymap.c b/keyboards/takashicompany/compacx/keymaps/via/keymap.c new file mode 100644 index 0000000000..068f621ff8 --- /dev/null +++ b/keyboards/takashicompany/compacx/keymaps/via/keymap.c @@ -0,0 +1,68 @@ +/* Copyright 2021 takashicompany + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_BSPC, KC_ESC, KC_6, KC_7, KC_8, KC_9, KC_0, KC_JYEN, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_ENT, KC_TAB, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_ENT, + KC_CAPS, KC_A, KC_S, LT(2, KC_D), KC_F, KC_G, KC_RCTL, KC_H, KC_J, KC_K, KC_L, KC_SCLN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_DEL, KC_RSFT, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, + TG(2), LT(3 ,KC_PSCR), KC_LCTL, KC_LGUI, LSFT_T(KC_TAB), LALT_T(KC_LANG2), KC_SPC, KC_SPC, LT(1, KC_LANG1), KC_RALT, KC_RGUI, KC_RCTL, MO(3), KC_DEL + ), + + LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MINS, KC_EQL, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_TRNS, + KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SCLN, KC_QUOT, KC_NUHS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + LAYOUT( + KC_TRNS, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_P7, KC_P8, KC_P9, KC_PPLS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_P4, KC_P5, KC_P6, KC_PCMM, KC_TRNS, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, + KC_TRNS, KC_P1, KC_P2, KC_P3, KC_PEQL, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_P0, KC_PDOT, KC_PENT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + LAYOUT( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_TRNS, KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, + KC_TRNS, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, KC_TRNS, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, + KC_TRNS, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, RGB_M_K, RGB_M_X, RGB_M_G, RGB_M_T, RGB_M_T, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; + diff --git a/keyboards/takashicompany/compacx/keymaps/via/rules.mk b/keyboards/takashicompany/compacx/keymaps/via/rules.mk new file mode 100644 index 0000000000..036bd6d1c3 --- /dev/null +++ b/keyboards/takashicompany/compacx/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes \ No newline at end of file diff --git a/keyboards/takashicompany/compacx/readme.md b/keyboards/takashicompany/compacx/readme.md new file mode 100644 index 0000000000..ac5cfee169 --- /dev/null +++ b/keyboards/takashicompany/compacx/readme.md @@ -0,0 +1,29 @@ +# Compacx + +![image](https://github.com/takashicompany/compacx/blob/master/images/qmk.jpg?raw=true) + +"Compacx" is a 35-key keyboard with an ISO enter key. +It is the perfect size for a macro pad or a one-handed gaming keyboard. +It can also be used as a split keyboard by combining two units. + +* Keyboard Maintainer: [takashicompany](https://github.com/takashicompany) +* Hardware Supported: PCB, Pro Micro +* Hardware Availability: https://github.com/takashicompany/compacx + +Make example for this keyboard (after setting up your build environment): + + make takashicompany/compacx:default + +Flashing example for this keyboard: + + make takashicompany/compacx:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available diff --git a/keyboards/takashicompany/compacx/rules.mk b/keyboards/takashicompany/compacx/rules.mk new file mode 100644 index 0000000000..a30c20773d --- /dev/null +++ b/keyboards/takashicompany/compacx/rules.mk @@ -0,0 +1,23 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = caterina + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +SPLIT_KEYBOARD=yes +ENCODER_ENABLE = yes From aaf4b348f072385697f2246e39105c49bb21f8c8 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Thu, 4 Nov 2021 07:16:35 +0000 Subject: [PATCH 417/595] Xelus Dawn60 Layout Macro Additions (#15049) * add matrix diagrams to keyboard header files * rename LAYOUT_60_all to LAYOUT_all * add LAYOUT_60_ansi_arrow * add LAYOUT_60_tsangan_hhkb --- keyboards/xelus/dawn60/info.json | 146 +++++++++++++++++- .../xelus/dawn60/keymaps/default/keymap.c | 8 +- keyboards/xelus/dawn60/keymaps/via/keymap.c | 8 +- keyboards/xelus/dawn60/rev1/rev1.h | 47 +++++- keyboards/xelus/dawn60/rev1_qmk/rev1_qmk.h | 47 +++++- 5 files changed, 245 insertions(+), 11 deletions(-) diff --git a/keyboards/xelus/dawn60/info.json b/keyboards/xelus/dawn60/info.json index dad605152a..346422b92a 100644 --- a/keyboards/xelus/dawn60/info.json +++ b/keyboards/xelus/dawn60/info.json @@ -2,8 +2,11 @@ "keyboard_name": "Dawn60", "url": "", "maintainer": "Xelus22", + "layout_aliases": { + "LAYOUT_60_all": "LAYOUT_all" + }, "layouts": { - "LAYOUT_60_all": { + "LAYOUT_all": { "layout": [ {"label":"Esc", "x":0, "y":0}, {"label":"1", "x":1, "y":0}, @@ -70,6 +73,147 @@ {"label":"Down", "x":13, "y":4}, {"label":"Right", "x":14, "y":4} ] + }, + "LAYOUT_60_ansi_arrow": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"1!", "x":1, "y":0}, + {"label":"2@", "x":2, "y":0}, + {"label":"3#", "x":3, "y":0}, + {"label":"4$", "x":4, "y":0}, + {"label":"5%", "x":5, "y":0}, + {"label":"6^", "x":6, "y":0}, + {"label":"7&", "x":7, "y":0}, + {"label":"8*", "x":8, "y":0}, + {"label":"9(", "x":9, "y":0}, + {"label":"0)", "x":10, "y":0}, + {"label":"-_", "x":11, "y":0}, + {"label":"=+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0, "w":2}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[{", "x":11.5, "y":1}, + {"label":"]}", "x":12.5, "y":1}, + {"label":"\\|", "x":13.5, "y":1, "w":1.5}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";:", "x":10.75, "y":2}, + {"label":"'\"", "x":11.75, "y":2}, + {"label":"Enter", "x":12.75, "y":2, "w":2.25}, + + {"label":"Shift", "x":0, "y":3, "w":2.25}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",<", "x":9.25, "y":3}, + {"label":".>", "x":10.25, "y":3}, + {"label":"Shift", "x":11.25, "y":3, "w":1.75}, + {"label":"Up", "x":13, "y":3}, + {"label":"Fn", "x":14, "y":3}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"GUI", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"label":"Space", "x":3.75, "y":4, "w":6.25}, + {"label":"Alt", "x":10, "y":4}, + {"label":"Ctrl", "x":11, "y":4}, + {"label":"Left", "x":12, "y":4}, + {"label":"Down", "x":13, "y":4}, + {"label":"Right", "x":14, "y":4} + ] + }, + "LAYOUT_60_tsangan_hhkb": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"1!", "x":1, "y":0}, + {"label":"2@", "x":2, "y":0}, + {"label":"3#", "x":3, "y":0}, + {"label":"4$", "x":4, "y":0}, + {"label":"5%", "x":5, "y":0}, + {"label":"6^", "x":6, "y":0}, + {"label":"7&", "x":7, "y":0}, + {"label":"8*", "x":8, "y":0}, + {"label":"9(", "x":9, "y":0}, + {"label":"0)", "x":10, "y":0}, + {"label":"-_", "x":11, "y":0}, + {"label":"=+", "x":12, "y":0}, + {"label":"\\|", "x":13, "y":0}, + {"label":"Delete", "x":14, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[{", "x":11.5, "y":1}, + {"label":"]}", "x":12.5, "y":1}, + {"label":"Backspace", "x":13.5, "y":1, "w":1.5}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";:", "x":10.75, "y":2}, + {"label":"'\"", "x":11.75, "y":2}, + {"label":"Enter", "x":12.75, "y":2, "w":2.25}, + + {"label":"Shift", "x":0, "y":3, "w":2.25}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",<", "x":9.25, "y":3}, + {"label":".>", "x":10.25, "y":3}, + {"label":"/?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"Fn", "x":14, "y":3}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.5}, + {"label":"GUI", "x":1.5, "y":4}, + {"label":"Alt", "x":2.5, "y":4, "w":1.5}, + {"label":"Space", "x":4, "y":4, "w":7}, + {"label":"Alt", "x":11, "y":4, "w":1.5}, + {"label":"Menu", "x":12.5, "y":4}, + {"label":"Ctrl", "x":13.5, "y":4, "w":1.5} + ] } } } diff --git a/keyboards/xelus/dawn60/keymaps/default/keymap.c b/keyboards/xelus/dawn60/keymaps/default/keymap.c index 431a596c22..479764f3c3 100644 --- a/keyboards/xelus/dawn60/keymaps/default/keymap.c +++ b/keyboards/xelus/dawn60/keymaps/default/keymap.c @@ -12,7 +12,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { // Default layer: Pressing caps-lock momentarily switches to Layer 1. // This is the default layer. Pressing an empty keycode on another layer will take you here. - [0] = LAYOUT_60_all( + [0] = LAYOUT_all( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL , KC_BSLS, KC_DEL, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, @@ -20,7 +20,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ), - [1] = LAYOUT_60_all( + [1] = LAYOUT_all( KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_PSCR, KC_CAPS, KC_TRNS, KC_UP , KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, @@ -28,7 +28,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END ), - [2] = LAYOUT_60_all( + [2] = LAYOUT_all( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, @@ -36,7 +36,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), - [3] = LAYOUT_60_all( + [3] = LAYOUT_all( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, diff --git a/keyboards/xelus/dawn60/keymaps/via/keymap.c b/keyboards/xelus/dawn60/keymaps/via/keymap.c index 431a596c22..479764f3c3 100644 --- a/keyboards/xelus/dawn60/keymaps/via/keymap.c +++ b/keyboards/xelus/dawn60/keymaps/via/keymap.c @@ -12,7 +12,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { // Default layer: Pressing caps-lock momentarily switches to Layer 1. // This is the default layer. Pressing an empty keycode on another layer will take you here. - [0] = LAYOUT_60_all( + [0] = LAYOUT_all( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL , KC_BSLS, KC_DEL, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, @@ -20,7 +20,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ), - [1] = LAYOUT_60_all( + [1] = LAYOUT_all( KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_PSCR, KC_CAPS, KC_TRNS, KC_UP , KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, KC_VOLU, KC_MUTE, KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, @@ -28,7 +28,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END ), - [2] = LAYOUT_60_all( + [2] = LAYOUT_all( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, @@ -36,7 +36,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), - [3] = LAYOUT_60_all( + [3] = LAYOUT_all( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, diff --git a/keyboards/xelus/dawn60/rev1/rev1.h b/keyboards/xelus/dawn60/rev1/rev1.h index 53d40e5499..49fd9420f2 100644 --- a/keyboards/xelus/dawn60/rev1/rev1.h +++ b/keyboards/xelus/dawn60/rev1/rev1.h @@ -21,7 +21,24 @@ #define XXX KC_NO -#define LAYOUT_60_all( \ +/* LAYOUT_all + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ ┌───────┐ + * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0A │0B │0C │0D │2D │ │0D │ 2u Backspace + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤ └───────┘ + * │10 │11 │12 │13 │14 │15 │16 │17 │18 │19 │1A │1B │1C │1D │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ + * │20 │21 │22 │23 │24 │25 │26 │27 │28 │29 │2A │2B │2C │ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┬───┤ ┌───┬──────┬───┐ + * │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3B │3C │3D │ │3B │3C │3D │ 1/1.75/1u + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴──┬┴──┬───┼───┼───┤ └───┴──────┴───┘ + * │40 │41 │42 │45 │49 │4A │4B │4C │4D │ + * └────┴────┴────┴────────────────────────┴───┴───┴───┴───┴───┘ + * ┌─────┬───┬─────┬───────────────────────────┬─────┬───┬─────┐ + * │40 │41 │42 │45 │4A │4C │4D │ Tsangan + * └─────┴───┴─────┴───────────────────────────┴─────┴───┴─────┘ + */ + +#define LAYOUT_all( \ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D, \ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ @@ -34,3 +51,31 @@ { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, XXX, K3B, K3C, K3D }, \ { K40, K41, K42, XXX, XXX, K45, XXX, XXX, XXX, K49, K4A, K4B, K4C, K4D } \ } + +#define LAYOUT_60_ansi_arrow( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3B, K3C, K3D, \ + K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, XXX, K3B, K3C, K3D }, \ + { K40, K41, K42, XXX, XXX, K45, XXX, XXX, XXX, K49, K4A, K4B, K4C, K4D } \ +} + +#define LAYOUT_60_tsangan_hhkb( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3B, K3C, K3D, \ + K40, K41, K42, K45, K4A, K4C, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, XXX, K3B, K3C, K3D }, \ + { K40, K41, K42, XXX, XXX, K45, XXX, XXX, XXX, XXX, K4A, XXX, K4C, K4D } \ +} diff --git a/keyboards/xelus/dawn60/rev1_qmk/rev1_qmk.h b/keyboards/xelus/dawn60/rev1_qmk/rev1_qmk.h index 3625ab1f11..d5284c0280 100644 --- a/keyboards/xelus/dawn60/rev1_qmk/rev1_qmk.h +++ b/keyboards/xelus/dawn60/rev1_qmk/rev1_qmk.h @@ -19,7 +19,24 @@ #define XXX KC_NO -#define LAYOUT_60_all( \ +/* LAYOUT_all + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ ┌───────┐ + * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0A │0B │0C │0D │2D │ │0D │ 2u Backspace + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤ └───────┘ + * │10 │11 │12 │13 │14 │15 │16 │17 │18 │19 │1A │1B │1C │1D │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ + * │20 │21 │22 │23 │24 │25 │26 │27 │28 │29 │2A │2B │2C │ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┬───┤ ┌───┬──────┬───┐ + * │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3B │3C │3D │ │3B │3C │3D │ 1/1.75/1u + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴──┬┴──┬───┼───┼───┤ └───┴──────┴───┘ + * │40 │41 │42 │45 │49 │4A │4B │4C │4D │ + * └────┴────┴────┴────────────────────────┴───┴───┴───┴───┴───┘ + * ┌─────┬───┬─────┬───────────────────────────┬─────┬───┬─────┐ + * │40 │41 │42 │45 │4A │4C │4D │ Tsangan + * └─────┴───┴─────┴───────────────────────────┴─────┴───┴─────┘ + */ + +#define LAYOUT_all( \ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D, \ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ @@ -32,3 +49,31 @@ { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, XXX, K3B, K3C, K3D }, \ { K40, K41, K42, XXX, XXX, K45, XXX, XXX, XXX, K49, K4A, K4B, K4C, K4D } \ } + +#define LAYOUT_60_ansi_arrow( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3B, K3C, K3D, \ + K40, K41, K42, K45, K49, K4A, K4B, K4C, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, XXX, K3B, K3C, K3D }, \ + { K40, K41, K42, XXX, XXX, K45, XXX, XXX, XXX, K49, K4A, K4B, K4C, K4D } \ +} + +#define LAYOUT_60_tsangan_hhkb( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3B, K3C, K3D, \ + K40, K41, K42, K45, K4A, K4C, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, XXX, K3B, K3C, K3D }, \ + { K40, K41, K42, XXX, XXX, K45, XXX, XXX, XXX, XXX, K4A, XXX, K4C, K4D } \ +} From c85109b1089b646641ec28e81d9530b8d1d0f263 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Thu, 4 Nov 2021 08:53:02 -0700 Subject: [PATCH 418/595] [Keyboard] Reduce compile size for takashicompany compacx (#15054) --- keyboards/takashicompany/compacx/keymaps/via/rules.mk | 2 +- keyboards/takashicompany/compacx/rules.mk | 1 + 2 files changed, 2 insertions(+), 1 deletion(-) diff --git a/keyboards/takashicompany/compacx/keymaps/via/rules.mk b/keyboards/takashicompany/compacx/keymaps/via/rules.mk index 036bd6d1c3..1e5b99807c 100644 --- a/keyboards/takashicompany/compacx/keymaps/via/rules.mk +++ b/keyboards/takashicompany/compacx/keymaps/via/rules.mk @@ -1 +1 @@ -VIA_ENABLE = yes \ No newline at end of file +VIA_ENABLE = yes diff --git a/keyboards/takashicompany/compacx/rules.mk b/keyboards/takashicompany/compacx/rules.mk index a30c20773d..ed3cc7866f 100644 --- a/keyboards/takashicompany/compacx/rules.mk +++ b/keyboards/takashicompany/compacx/rules.mk @@ -21,3 +21,4 @@ RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output SPLIT_KEYBOARD=yes ENCODER_ENABLE = yes +LTO_ENABLE = yes From ce899629cea8c1ff3bccf367b0a74b979e54dcec Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Thu, 4 Nov 2021 08:53:20 -0700 Subject: [PATCH 419/595] [Keyboard] Fix keycode collision in craftwalk keymap (#15055) --- keyboards/craftwalk/keymaps/default/keymap.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/keyboards/craftwalk/keymaps/default/keymap.c b/keyboards/craftwalk/keymaps/default/keymap.c index 40c9514475..f02f9c975f 100644 --- a/keyboards/craftwalk/keymaps/default/keymap.c +++ b/keyboards/craftwalk/keymaps/default/keymap.c @@ -22,15 +22,15 @@ enum layer_names { _ADJUST }; -#define KC_NUM MO(_NUM) -#define KC_ADJ MO(_ADJUST) +#define MO_NUM MO(_NUM) +#define MO_ADJ MO(_ADJUST) const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Base */ [_BASE] = LAYOUT( KC_Q, KC_W, KC_E, KC_LCTL, KC_A, KC_S, KC_D, - KC_LSFT, KC_ADJ, KC_WH_U, KC_WH_D, KC_F, KC_NUM, KC_SPC + KC_LSFT, MO_ADJ, KC_WH_U, KC_WH_D, KC_F, MO_NUM, KC_SPC ), /* Number */ [_NUM] = LAYOUT( From 6437045166cafab14f2fbe5fcae44f6b066adbc5 Mon Sep 17 00:00:00 2001 From: Ryan Date: Fri, 5 Nov 2021 08:02:27 +1100 Subject: [PATCH 420/595] `qmk docs`: Run `docsify serve` if available (#15056) --- docs/cli_commands.md | 2 ++ lib/python/qmk/cli/docs.py | 32 +++++++++++++++++++++++--------- 2 files changed, 25 insertions(+), 9 deletions(-) diff --git a/docs/cli_commands.md b/docs/cli_commands.md index 8fa7ad41dc..e498f3b22e 100644 --- a/docs/cli_commands.md +++ b/docs/cli_commands.md @@ -373,6 +373,8 @@ qmk format-c -b branch_name This command starts a local HTTP server which you can use for browsing or improving the docs. Default port is 8936. Use the `-b`/`--browser` flag to automatically open the local webserver in your default browser. +This command runs `docsify serve` if `docsify-cli` is installed (which provides live reload), otherwise Python's builtin HTTP server module will be used. + **Usage**: ``` diff --git a/lib/python/qmk/cli/docs.py b/lib/python/qmk/cli/docs.py index d8f9b045a1..c24b914bc1 100644 --- a/lib/python/qmk/cli/docs.py +++ b/lib/python/qmk/cli/docs.py @@ -2,6 +2,7 @@ """ import http.server import os +import shutil import webbrowser from milc import cli @@ -11,20 +12,33 @@ from milc import cli @cli.argument('-b', '--browser', action='store_true', help='Open the docs in the default browser.') @cli.subcommand('Run a local webserver for QMK documentation.', hidden=False if cli.config.user.developer else True) def docs(cli): - """Spin up a local HTTPServer instance for the QMK docs. + """Spin up a local HTTP server for the QMK docs. """ os.chdir('docs') - with http.server.HTTPServer(('', cli.config.docs.port), http.server.SimpleHTTPRequestHandler) as httpd: - cli.log.info(f"Serving QMK docs at http://localhost:{cli.config.docs.port}/") - cli.log.info("Press Control+C to exit.") + # If docsify-cli is installed, run that instead so we get live reload + if shutil.which('docsify'): + command = ['docsify', 'serve', '--port', f'{cli.config.docs.port}', '--open' if cli.config.docs.browser else ''] - if cli.config.docs.browser: - webbrowser.open(f'http://localhost:{cli.config.docs.port}') + cli.log.info(f"Running {{fg_cyan}}{str.join(' ', command)}{{fg_reset}}") + cli.log.info("Press Control+C to exit.") try: - httpd.serve_forever() + cli.run(command, capture_output=False) except KeyboardInterrupt: cli.log.info("Stopping HTTP server...") - finally: - httpd.shutdown() + else: + # Fall back to Python HTTPServer + with http.server.HTTPServer(('', cli.config.docs.port), http.server.SimpleHTTPRequestHandler) as httpd: + cli.log.info(f"Serving QMK docs at http://localhost:{cli.config.docs.port}/") + cli.log.info("Press Control+C to exit.") + + if cli.config.docs.browser: + webbrowser.open(f'http://localhost:{cli.config.docs.port}') + + try: + httpd.serve_forever() + except KeyboardInterrupt: + cli.log.info("Stopping HTTP server...") + finally: + httpd.shutdown() From 94018367278f44fcf3eab8a86525f2b257ecf4ba Mon Sep 17 00:00:00 2001 From: Ryan Date: Fri, 5 Nov 2021 08:08:52 +1100 Subject: [PATCH 421/595] Map `PRODUCT` define to `keyboard_name` (#14372) * Map `PRODUCT` define to `keyboard_name` * Fix tests * Fix last test --- data/mappings/info_config.json | 2 +- keyboards/handwired/pytest/basic/info.json | 13 ++++++------- keyboards/handwired/pytest/config.h | 7 ------- keyboards/handwired/pytest/info.json | 10 ++++++++++ lib/python/qmk/cli/generate/dfu_header.py | 2 +- lib/python/qmk/tests/minimal_info.json | 2 +- lib/python/qmk/tests/test_cli_commands.py | 10 +++++----- 7 files changed, 24 insertions(+), 22 deletions(-) create mode 100644 keyboards/handwired/pytest/info.json diff --git a/data/mappings/info_config.json b/data/mappings/info_config.json index 72bb0f4a1c..f1e06dfea1 100644 --- a/data/mappings/info_config.json +++ b/data/mappings/info_config.json @@ -68,7 +68,7 @@ "RGBLIGHT_SLEEP": {"info_key": "rgblight.sleep", "value_type": "bool"}, "RGBLIGHT_SPLIT": {"info_key": "rgblight.split", "value_type": "bool"}, "RGBW": {"info_key": "rgblight.rgbw", "value_type": "bool"}, - "PRODUCT": {"info_key": "keyboard_folder", "to_json": false}, + "PRODUCT": {"info_key": "keyboard_name"}, "PRODUCT_ID": {"info_key": "usb.pid", "value_type": "hex"}, "VENDOR_ID": {"info_key": "usb.vid", "value_type": "hex"}, "QMK_ESC_OUTPUT": {"info_key": "qmk_lufa_bootloader.esc_output"}, diff --git a/keyboards/handwired/pytest/basic/info.json b/keyboards/handwired/pytest/basic/info.json index ed052a14a3..af57447d30 100644 --- a/keyboards/handwired/pytest/basic/info.json +++ b/keyboards/handwired/pytest/basic/info.json @@ -1,10 +1,9 @@ { - "maintainer": "qmk", - "layouts": { - "LAYOUT_custom": { - "layout": [ - { "label": "KC_Q", "matrix": [0, 0], "w": 1, "x": 0, "y": 0 } - ] + "layouts": { + "LAYOUT_custom": { + "layout": [ + { "label": "KC_Q", "matrix": [0, 0], "w": 1, "x": 0, "y": 0 } + ] + } } - } } diff --git a/keyboards/handwired/pytest/config.h b/keyboards/handwired/pytest/config.h index 64cf353126..f03597a7d4 100644 --- a/keyboards/handwired/pytest/config.h +++ b/keyboards/handwired/pytest/config.h @@ -2,13 +2,6 @@ #include "config_common.h" -/* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6465 -#define DEVICE_VER 0x0001 -#define MANUFACTURER none -#define PRODUCT pytest - /* key matrix size */ #define MATRIX_ROWS 1 #define MATRIX_COLS 1 diff --git a/keyboards/handwired/pytest/info.json b/keyboards/handwired/pytest/info.json new file mode 100644 index 0000000000..5c941af9bf --- /dev/null +++ b/keyboards/handwired/pytest/info.json @@ -0,0 +1,10 @@ +{ + "keyboard_name": "pytest", + "manufacturer": "none", + "maintainer": "qmk", + "usb": { + "vid": "0xFEED", + "pid": "0x6465", + "device_ver": "0x0001" + } +} diff --git a/lib/python/qmk/cli/generate/dfu_header.py b/lib/python/qmk/cli/generate/dfu_header.py index 5a1b109f1e..7fb585fc7d 100644 --- a/lib/python/qmk/cli/generate/dfu_header.py +++ b/lib/python/qmk/cli/generate/dfu_header.py @@ -32,7 +32,7 @@ def generate_dfu_header(cli): keyboard_h_lines = ['/* This file was generated by `qmk generate-dfu-header`. Do not edit or copy.', ' */', '', '#pragma once'] keyboard_h_lines.append(f'#define MANUFACTURER {kb_info_json["manufacturer"]}') - keyboard_h_lines.append(f'#define PRODUCT {cli.config.generate_dfu_header.keyboard} Bootloader') + keyboard_h_lines.append(f'#define PRODUCT {kb_info_json["keyboard_name"]} Bootloader') # Optional if 'qmk_lufa_bootloader.esc_output' in kb_info_json: diff --git a/lib/python/qmk/tests/minimal_info.json b/lib/python/qmk/tests/minimal_info.json index 11ef12fefe..3aae4722bf 100644 --- a/lib/python/qmk/tests/minimal_info.json +++ b/lib/python/qmk/tests/minimal_info.json @@ -4,7 +4,7 @@ "layouts": { "LAYOUT": { "layout": [ - { "label": "KC_A", "x": 0, "y": 0, "matrix": [0, 0] } + { "label": "KC_A", "matrix": [0, 0], "x": 0, "y": 0 } ] } } diff --git a/lib/python/qmk/tests/test_cli_commands.py b/lib/python/qmk/tests/test_cli_commands.py index e4eaef899a..9f2c258ab4 100644 --- a/lib/python/qmk/tests/test_cli_commands.py +++ b/lib/python/qmk/tests/test_cli_commands.py @@ -151,7 +151,7 @@ def test_json2c_stdin(): def test_info(): result = check_subcommand('info', '-kb', 'handwired/pytest/basic') check_returncode(result) - assert 'Keyboard Name: handwired/pytest/basic' in result.stdout + assert 'Keyboard Name: pytest' in result.stdout assert 'Processor: atmega32u4' in result.stdout assert 'Layout:' not in result.stdout assert 'k0' not in result.stdout @@ -160,7 +160,7 @@ def test_info(): def test_info_keyboard_render(): result = check_subcommand('info', '-kb', 'handwired/pytest/basic', '-l') check_returncode(result) - assert 'Keyboard Name: handwired/pytest/basic' in result.stdout + assert 'Keyboard Name: pytest' in result.stdout assert 'Processor: atmega32u4' in result.stdout assert 'Layouts:' in result.stdout assert 'k0' in result.stdout @@ -169,7 +169,7 @@ def test_info_keyboard_render(): def test_info_keymap_render(): result = check_subcommand('info', '-kb', 'handwired/pytest/basic', '-km', 'default_json') check_returncode(result) - assert 'Keyboard Name: handwired/pytest/basic' in result.stdout + assert 'Keyboard Name: pytest' in result.stdout assert 'Processor: atmega32u4' in result.stdout if is_windows: @@ -181,7 +181,7 @@ def test_info_keymap_render(): def test_info_matrix_render(): result = check_subcommand('info', '-kb', 'handwired/pytest/basic', '-m') check_returncode(result) - assert 'Keyboard Name: handwired/pytest/basic' in result.stdout + assert 'Keyboard Name: pytest' in result.stdout assert 'Processor: atmega32u4' in result.stdout assert 'LAYOUT_ortho_1x1' in result.stdout @@ -242,7 +242,7 @@ def test_generate_config_h(): assert '# define DESCRIPTION handwired/pytest/basic' in result.stdout assert '# define DIODE_DIRECTION COL2ROW' in result.stdout assert '# define MANUFACTURER none' in result.stdout - assert '# define PRODUCT handwired/pytest/basic' in result.stdout + assert '# define PRODUCT pytest' in result.stdout assert '# define PRODUCT_ID 0x6465' in result.stdout assert '# define VENDOR_ID 0xFEED' in result.stdout assert '# define MATRIX_COLS 1' in result.stdout From fefd7fdc5145b677da7b0e1d75bab11eac9db605 Mon Sep 17 00:00:00 2001 From: Mikkel Jeppesen <2756925+Duckle29@users.noreply.github.com> Date: Thu, 4 Nov 2021 22:14:43 +0100 Subject: [PATCH 422/595] Refactor new-keyboard to be python3.7 compatible (#14707) * Use copy_tree from distutils for python 3.7 support * Bump python version in docs * Changed new-keyboard to use printf-style format strings * Use username for manunfacturer / maintainer * Update lib/python/qmk/cli/new/keyboard.py Co-authored-by: Zach White Co-authored-by: Zach White --- data/templates/avr/config.h | 22 +----- data/templates/avr/readme.md | 10 +-- data/templates/base/%(KEYBOARD)s.c | 4 + data/templates/base/%(KEYBOARD)s.h | 22 ++++++ data/templates/base/info.json | 4 +- data/templates/base/keyboard.c | 17 ---- data/templates/base/keyboard.h | 35 -------- data/templates/base/keymaps/default/keymap.c | 48 +---------- data/templates/base/keymaps/default/readme.md | 2 +- data/templates/ps2avrgb/config.h | 22 +----- data/templates/ps2avrgb/readme.md | 10 +-- docs/coding_conventions_python.md | 2 +- lib/python/qmk/cli/new/keyboard.py | 79 +++++++++---------- 13 files changed, 90 insertions(+), 187 deletions(-) create mode 100644 data/templates/base/%(KEYBOARD)s.c create mode 100644 data/templates/base/%(KEYBOARD)s.h delete mode 100644 data/templates/base/keyboard.c delete mode 100644 data/templates/base/keyboard.h diff --git a/data/templates/avr/config.h b/data/templates/avr/config.h index 4192bbcfa2..7c15e8e704 100644 --- a/data/templates/avr/config.h +++ b/data/templates/avr/config.h @@ -1,19 +1,5 @@ -/* -Copyright %YEAR% %YOUR_NAME% - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ +// Copyright %(YEAR)s %(YOUR_NAME)s (@%(USER_NAME)s) +// SPDX-License-Identifier: GPL-2.0-or-later #pragma once @@ -23,8 +9,8 @@ along with this program. If not, see . #define VENDOR_ID 0xFEED #define PRODUCT_ID 0x0000 #define DEVICE_VER 0x0001 -#define MANUFACTURER %YOUR_NAME% -#define PRODUCT %KEYBOARD% +#define MANUFACTURER %(USER_NAME)s +#define PRODUCT %(KEYBOARD)s /* key matrix size */ #define MATRIX_ROWS 2 diff --git a/data/templates/avr/readme.md b/data/templates/avr/readme.md index b099ed726d..207850e065 100644 --- a/data/templates/avr/readme.md +++ b/data/templates/avr/readme.md @@ -1,20 +1,20 @@ -# %KEYBOARD% +# %(KEYBOARD)s -![%KEYBOARD%](imgur.com image replace me!) +![%(KEYBOARD)s](imgur.com image replace me!) *A short description of the keyboard/project* -* Keyboard Maintainer: [%YOUR_NAME%](https://github.com/yourusername) +* Keyboard Maintainer: [%(YOUR_NAME)s](https://github.com/%(USER_NAME)s) * Hardware Supported: *The PCBs, controllers supported* * Hardware Availability: *Links to where you can find this hardware* Make example for this keyboard (after setting up your build environment): - make %KEYBOARD%:default + make %(KEYBOARD)s:default Flashing example for this keyboard: - make %KEYBOARD%:default:flash + make %(KEYBOARD)s:default:flash See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/data/templates/base/%(KEYBOARD)s.c b/data/templates/base/%(KEYBOARD)s.c new file mode 100644 index 0000000000..0c509aff65 --- /dev/null +++ b/data/templates/base/%(KEYBOARD)s.c @@ -0,0 +1,4 @@ +// Copyright %(YEAR)s %(YOUR_NAME)s (@%(USER_NAME)s) +// SPDX-License-Identifier: GPL-2.0-or-later + +#include "%(KEYBOARD)s.h" diff --git a/data/templates/base/%(KEYBOARD)s.h b/data/templates/base/%(KEYBOARD)s.h new file mode 100644 index 0000000000..3e8ca3912d --- /dev/null +++ b/data/templates/base/%(KEYBOARD)s.h @@ -0,0 +1,22 @@ +// Copyright %(YEAR)s %(YOUR_NAME)s (@%(USER_NAME)s) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + k00, k01, k02, \ + k10, k12 \ +) { \ + { k00, k01, k02 }, \ + { k10, KC_NO, k12 } \ +} diff --git a/data/templates/base/info.json b/data/templates/base/info.json index 3993d85467..a50ccba7bf 100644 --- a/data/templates/base/info.json +++ b/data/templates/base/info.json @@ -1,7 +1,7 @@ { - "keyboard_name": "%KEYBOARD%", + "keyboard_name": "%(KEYBOARD)s", "url": "", - "maintainer": "%YOUR_NAME%", + "maintainer": "%(USER_NAME)s", "layouts": { "LAYOUT": { "layout": [ diff --git a/data/templates/base/keyboard.c b/data/templates/base/keyboard.c deleted file mode 100644 index f69ae16ede..0000000000 --- a/data/templates/base/keyboard.c +++ /dev/null @@ -1,17 +0,0 @@ -/* Copyright %YEAR% %YOUR_NAME% - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include "%KEYBOARD%.h" diff --git a/data/templates/base/keyboard.h b/data/templates/base/keyboard.h deleted file mode 100644 index bd2e88d12b..0000000000 --- a/data/templates/base/keyboard.h +++ /dev/null @@ -1,35 +0,0 @@ -/* Copyright %YEAR% %YOUR_NAME% - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#pragma once - -#include "quantum.h" - -/* This is a shortcut to help you visually see your layout. - * - * The first section contains all of the arguments representing the physical - * layout of the board and position of the keys. - * - * The second converts the arguments into a two-dimensional array which - * represents the switch matrix. - */ -#define LAYOUT( \ - k00, k01, k02, \ - k10, k12 \ -) { \ - { k00, k01, k02 }, \ - { k10, KC_NO, k12 } \ -} diff --git a/data/templates/base/keymaps/default/keymap.c b/data/templates/base/keymaps/default/keymap.c index d8020ab3e3..3fec3d5120 100644 --- a/data/templates/base/keymaps/default/keymap.c +++ b/data/templates/base/keymaps/default/keymap.c @@ -1,18 +1,6 @@ -/* Copyright %YEAR% %YOUR_NAME% - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ +// Copyright %(YEAR)s %(YOUR_NAME)s (@%(USER_NAME)s) +// SPDX-License-Identifier: GPL-2.0-or-later + #include QMK_KEYBOARD_H // Defines names for use in layer keycodes and the keymap @@ -21,12 +9,6 @@ enum layer_names { _FN }; -// Defines the keycodes used by our macros in process_record_user -enum custom_keycodes { - QMKBEST = SAFE_RANGE, - QMKURL -}; - const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Base */ [_BASE] = LAYOUT( @@ -34,29 +16,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_SPC ), [_FN] = LAYOUT( - QMKBEST, QMKURL, _______, + _______, _______, _______, RESET, XXXXXXX ) }; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case QMKBEST: - if (record->event.pressed) { - // when keycode QMKBEST is pressed - SEND_STRING("QMK is the best thing ever!"); - } else { - // when keycode QMKBEST is released - } - break; - case QMKURL: - if (record->event.pressed) { - // when keycode QMKURL is pressed - SEND_STRING("https://qmk.fm/\n"); - } else { - // when keycode QMKURL is released - } - break; - } - return true; -} diff --git a/data/templates/base/keymaps/default/readme.md b/data/templates/base/keymaps/default/readme.md index e052ed80f1..63a0643275 100644 --- a/data/templates/base/keymaps/default/readme.md +++ b/data/templates/base/keymaps/default/readme.md @@ -1 +1 @@ -# The default keymap for %KEYBOARD% +# The default keymap for %(KEYBOARD)s diff --git a/data/templates/ps2avrgb/config.h b/data/templates/ps2avrgb/config.h index 6150bcce6d..876a60252f 100644 --- a/data/templates/ps2avrgb/config.h +++ b/data/templates/ps2avrgb/config.h @@ -1,19 +1,5 @@ -/* -Copyright %YEAR% %YOUR_NAME% - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ +// Copyright %(YEAR)s %(YOUR_NAME)s (@%(USER_NAME)s) +// SPDX-License-Identifier: GPL-2.0-or-later #pragma once @@ -23,8 +9,8 @@ along with this program. If not, see . #define VENDOR_ID 0xFEED #define PRODUCT_ID 0x0000 #define DEVICE_VER 0x0001 -#define MANUFACTURER %YOUR_NAME% -#define PRODUCT %KEYBOARD% +#define MANUFACTURER %(USER_NAME)s +#define PRODUCT %(KEYBOARD)s /* key matrix size */ #define MATRIX_ROWS 8 diff --git a/data/templates/ps2avrgb/readme.md b/data/templates/ps2avrgb/readme.md index 94063f9ebc..a2ac4495b6 100644 --- a/data/templates/ps2avrgb/readme.md +++ b/data/templates/ps2avrgb/readme.md @@ -1,20 +1,20 @@ -# %KEYBOARD% +# %(KEYBOARD)s -![%KEYBOARD%](imgur.com image replace me!) +![%(KEYBOARD)s](imgur.com image replace me!) *A short description of the keyboard/project* -* Keyboard Maintainer: [%YOUR_NAME%](https://github.com/yourusername) +* Keyboard Maintainer: [%(YOUR_NAME)s](https://github.com/yourusername) * Hardware Supported: *The PCBs, controllers supported* * Hardware Availability: *Links to where you can find this hardware* Make example for this keyboard (after setting up your build environment): - make %KEYBOARD%:default + make %(KEYBOARD)s:default Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) - make %KEYBOARD%:default:flash + make %(KEYBOARD)s:default:flash See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/docs/coding_conventions_python.md b/docs/coding_conventions_python.md index 47dff7f8ee..960b9cb49e 100644 --- a/docs/coding_conventions_python.md +++ b/docs/coding_conventions_python.md @@ -2,7 +2,7 @@ Most of our style follows PEP8 with some local modifications to make things less nit-picky. -* We target Python 3.6 for compatability with all supported platforms. +* We target Python 3.7 for compatability with all supported platforms. * We indent using four (4) spaces (soft tabs) * We encourage liberal use of comments * Think of them as a story describing the feature diff --git a/lib/python/qmk/cli/new/keyboard.py b/lib/python/qmk/cli/new/keyboard.py index 369d2bd7da..4093b8c90d 100644 --- a/lib/python/qmk/cli/new/keyboard.py +++ b/lib/python/qmk/cli/new/keyboard.py @@ -1,10 +1,8 @@ """This script automates the creation of new keyboard directories using a starter template. """ from datetime import date -import fileinput from pathlib import Path import re -import shutil from qmk.commands import git_get_username import qmk.path @@ -32,6 +30,7 @@ def validate_keyboard_name(name): @cli.argument('-kb', '--keyboard', help='Specify the name for the new keyboard directory', arg_only=True, type=keyboard_name) @cli.argument('-t', '--type', help='Specify the keyboard type', arg_only=True, choices=KEYBOARD_TYPES) @cli.argument('-u', '--username', help='Specify your username (default from Git config)', arg_only=True) +@cli.argument('-n', '--realname', help='Specify your real name if you want to use that. Defaults to username', arg_only=True) @cli.subcommand('Creates a new keyboard directory') def new_keyboard(cli): """Creates a new keyboard. @@ -69,7 +68,7 @@ def new_keyboard(cli): # Get username user_name = None while not user_name: - user_name = question('Your Name:', default=find_user_name()) + user_name = question('Your GitHub User Name:', default=find_user_name()) if not user_name: cli.log.error('You didn\'t provide a username, and we couldn\'t find one set in your QMK or Git configs. Please try again.') @@ -78,26 +77,21 @@ def new_keyboard(cli): if cli.args.username: return False - # Copy all the files - copy_templates(keyboard_type, keyboard_path) + real_name = None + while not real_name: + real_name = question('Your real name:', default=user_name) - # Replace all the placeholders keyboard_basename = keyboard_path.name - replacements = [ - ('%YEAR%', str(date.today().year)), - ('%KEYBOARD%', keyboard_basename), - ('%YOUR_NAME%', user_name), - ] - filenames = [ - keyboard_path / 'config.h', - keyboard_path / 'info.json', - keyboard_path / 'readme.md', - keyboard_path / f'{keyboard_basename}.c', - keyboard_path / f'{keyboard_basename}.h', - keyboard_path / 'keymaps/default/readme.md', - keyboard_path / 'keymaps/default/keymap.c', - ] - replace_placeholders(replacements, filenames) + replacements = { + "YEAR": str(date.today().year), + "KEYBOARD": keyboard_basename, + "USER_NAME": user_name, + "YOUR_NAME": real_name, + } + + template_dir = Path('data/templates') + template_tree(template_dir / 'base', keyboard_path, replacements) + template_tree(template_dir / keyboard_type, keyboard_path, replacements) cli.echo('') cli.log.info(f'{{fg_green}}Created a new keyboard called {{fg_cyan}}{new_keyboard_name}{{fg_green}}.{{fg_reset}}') @@ -114,29 +108,32 @@ def find_user_name(): return git_get_username() -def copy_templates(keyboard_type, keyboard_path): - """Copies the template files from data/templates to the new keyboard directory. - """ - template_base_path = Path('data/templates') - keyboard_basename = keyboard_path.name +def template_tree(src: Path, dst: Path, replacements: dict): + """Recursively copy template and replace placeholders - cli.log.info('Copying base template files...') - shutil.copytree(template_base_path / 'base', keyboard_path) + Args: + src (Path) + The source folder to copy from + dst (Path) + The destination folder to copy to + replacements (dict) + a dictionary with "key":"value" pairs to replace. - cli.log.info(f'Copying {{fg_cyan}}{keyboard_type}{{fg_reset}} template files...') - shutil.copytree(template_base_path / keyboard_type, keyboard_path, dirs_exist_ok=True) + Raises: + FileExistsError + When trying to overwrite existing files + """ - cli.log.info(f'Renaming {{fg_cyan}}keyboard.[ch]{{fg_reset}} to {{fg_cyan}}{keyboard_basename}.[ch]{{fg_reset}}...') - shutil.move(keyboard_path / 'keyboard.c', keyboard_path / f'{keyboard_basename}.c') - shutil.move(keyboard_path / 'keyboard.h', keyboard_path / f'{keyboard_basename}.h') + dst.mkdir(parents=True, exist_ok=True) + for child in src.iterdir(): + if child.is_dir(): + template_tree(child, dst / child.name, replacements=replacements) -def replace_placeholders(replacements, filenames): - """Replaces the given placeholders in each template file. - """ - for replacement in replacements: - cli.log.info(f'Replacing {{fg_cyan}}{replacement[0]}{{fg_reset}} with {{fg_cyan}}{replacement[1]}{{fg_reset}}...') + if child.is_file(): + file_name = dst / (child.name % replacements) - with fileinput.input(files=filenames, inplace=True) as file: - for line in file: - print(line.replace(replacement[0], replacement[1]), end='') + with file_name.open(mode='x') as dst_f: + with child.open() as src_f: + template = src_f.read() + dst_f.write(template % replacements) From 84ea77ead663624a6d8ae451ca3d4318008d9d41 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Thu, 4 Nov 2021 21:18:09 +0000 Subject: [PATCH 423/595] Remove `BOOTMAGIC_ENABLE = lite` option (#15002) * remove BOOTMAGIC_ENABLE=lite setting * change keyboard BOOTMAGIC_ENABLE rules Edits keyboard-level instances of `BOOTMAGIC_ENABLE = lite` to `BOOTMAGIC_ENABLE = yes`. * change keyboard BOOTMAGIC_ENABLE inline comments Edits keyboard-level BOOTMAGIC_ENABLE inline comments to "Enable Bootmagic Lite". * change keymap BOOTMAGIC_ENABLE rules Edits keymap-level instances of `BOOTMAGIC_ENABLE = lite` to `BOOTMAGIC_ENABLE = yes`. * change keymap BOOTMAGIC_ENABLE inline comments Edits/adds keymap-level BOOTMAGIC_ENABLE inline comments to read "Enable Bootmagic Lite". * change layout/user BOOTMAGIC_ENABLE rules/comments Edits instances of `BOOTMAGIC_ENABLE = lite` to `BOOTMAGIC_ENABLE = yes`. Edits/adds keymap-level BOOTMAGIC_ENABLE inline comments to read "Enable Bootmagic Lite". * update non-rules.mk BOOTMAGIC_ENABLE references in keyboards/ * remove docs references to Full Bootmagic * convert data-driven Bootmagic Lite instances * remove Bootmagic Lite bodge from data-driven generation * Merge remote-tracking branch 'upstream/develop' into rm/bootmagic-full_q4a * update docs/ja/config_options.md per mtei * update docs/faq_misc.md per mtei Remove remaining Full Bootmagic reference. --- common_features.mk | 4 ++-- docs/config_options.md | 2 +- docs/faq_misc.md | 4 ---- docs/feature_bootmagic.md | 2 -- docs/feature_velocikey.md | 1 - docs/fr-fr/faq_debug.md | 4 ---- docs/getting_started_make_guide.md | 2 +- docs/ja/config_options.md | 2 +- docs/ja/faq_misc.md | 4 ---- docs/ja/feature_velocikey.md | 1 - docs/zh-cn/faq_debug.md | 5 ----- keyboards/0xcb/1337/rules.mk | 2 +- keyboards/0xcb/static/rules.mk | 2 +- keyboards/10bleoledhub/rules.mk | 2 +- keyboards/1upkeyboards/1up60hse/rules.mk | 2 +- keyboards/1upkeyboards/1up60hte/rules.mk | 2 +- keyboards/1upkeyboards/1up60rgb/rules.mk | 2 +- keyboards/1upkeyboards/super16/rules.mk | 2 +- keyboards/2key2crawl/rules.mk | 2 +- keyboards/3keyecosystem/2key2/rules.mk | 2 +- keyboards/3w6/rev1/rules.mk | 2 +- keyboards/3w6/rev2/rules.mk | 2 +- keyboards/40percentclub/25/rules.mk | 2 +- keyboards/40percentclub/6lit/rules.mk | 2 +- keyboards/40percentclub/foobar/rules.mk | 2 +- .../40percentclub/gherkin/keymaps/stevexyz/rules.mk | 2 +- keyboards/40percentclub/gherkin/rules.mk | 2 +- keyboards/40percentclub/i75/rules.mk | 2 +- keyboards/40percentclub/luddite/rules.mk | 2 +- keyboards/40percentclub/mf68/keymaps/andyjack/rules.mk | 2 +- keyboards/40percentclub/mf68/rules.mk | 2 +- keyboards/40percentclub/nein/rules.mk | 2 +- keyboards/40percentclub/nori/rules.mk | 2 +- keyboards/40percentclub/sixpack/rules.mk | 2 +- keyboards/40percentclub/tomato/rules.mk | 2 +- keyboards/40percentclub/ut47/rules.mk | 2 +- keyboards/45_ats/rules.mk | 2 +- keyboards/4pplet/aekiso60/rev_a/rules.mk | 2 +- keyboards/4pplet/bootleg/rev_a/rules.mk | 2 +- keyboards/4pplet/eagle_viper_rep/rev_a/rules.mk | 2 +- keyboards/4pplet/steezy60/rev_a/rules.mk | 2 +- keyboards/4pplet/waffling60/rev_a/rules.mk | 2 +- keyboards/4pplet/waffling60/rev_b/rules.mk | 2 +- keyboards/7splus/rules.mk | 2 +- keyboards/absinthe/rules.mk | 2 +- keyboards/acekeyboard/titan60/rules.mk | 2 +- keyboards/acheron/arctic/rules.mk | 2 +- keyboards/acheron/austin/keymaps/via/rules.mk | 2 +- keyboards/acheron/austin/rules.mk | 2 +- keyboards/acheron/elongate/rules.mk | 2 +- keyboards/acheron/keebspcb/rules.mk | 2 +- keyboards/acheron/lasgweloth/rules.mk | 2 +- keyboards/acheron/shark/keymaps/via/rules.mk | 2 +- keyboards/acheron/shark/rules.mk | 2 +- keyboards/acr60/rules.mk | 2 +- keyboards/aeboards/aegis/rules.mk | 2 +- keyboards/aeboards/constellation/rev1/rules.mk | 2 +- keyboards/aeboards/constellation/rev2/rules.mk | 2 +- keyboards/aeboards/ext65/rev1/rules.mk | 2 +- keyboards/aeboards/ext65/rev2/rules.mk | 2 +- keyboards/afternoonlabs/breeze/rev0/rules.mk | 2 +- keyboards/afternoonlabs/breeze/rev1/rules.mk | 2 +- keyboards/afternoonlabs/oceanbreeze/rev1/rules.mk | 2 +- keyboards/afternoonlabs/southern_breeze/rev1/rules.mk | 2 +- keyboards/afternoonlabs/summer_breeze/rev1/rules.mk | 2 +- keyboards/ai03/andromeda/rules.mk | 2 +- keyboards/ai03/equinox/rev0/rules.mk | 2 +- keyboards/ai03/equinox/rev1/rules.mk | 2 +- keyboards/ai03/orbit_x/rules.mk | 2 +- keyboards/ai03/polaris/rules.mk | 2 +- keyboards/ai03/vega/rules.mk | 2 +- keyboards/ai03/voyager60_alps/rules.mk | 2 +- keyboards/ajisai74/rules.mk | 2 +- keyboards/akb/eb46/rules.mk | 2 +- keyboards/akb/raine/rules.mk | 2 +- keyboards/aleblazer/zodiark/rules.mk | 2 +- keyboards/aleth42/rev1/rules.mk | 2 +- keyboards/alf/x11/rules.mk | 2 +- keyboards/alf/x2/rules.mk | 2 +- keyboards/alfredslab/swift65/solder/rules.mk | 2 +- keyboards/allison/rules.mk | 2 +- keyboards/allison_numpad/rules.mk | 2 +- keyboards/alpha/rules.mk | 2 +- keyboards/alpine65/rules.mk | 2 +- keyboards/alps64/rules.mk | 2 +- keyboards/alu84/rules.mk | 2 +- keyboards/amag23/rules.mk | 2 +- keyboards/amj40/rules.mk | 2 +- keyboards/amjkeyboard/amj66/rules.mk | 2 +- keyboards/anomalykb/a65i/rules.mk | 2 +- keyboards/aos/tkl/rules.mk | 2 +- keyboards/aozora/hotswap/rules.mk | 2 +- keyboards/ares/rules.mk | 2 +- keyboards/arisu/rules.mk | 2 +- keyboards/arrayperipherals/1x4p1/rules.mk | 2 +- keyboards/ash1800/rules.mk | 2 +- keyboards/ash_xiix/rules.mk | 2 +- keyboards/ashpil/modelm_usbc/rules.mk | 2 +- keyboards/at101_bh/rules.mk | 2 +- keyboards/atxkb/1894/rules.mk | 2 +- keyboards/aves65/rules.mk | 2 +- keyboards/axolstudio/helpo/rules.mk | 2 +- keyboards/axolstudio/yeti/rules.mk | 2 +- keyboards/bakeneko60/rules.mk | 2 +- keyboards/bakeneko65/rev2/rules.mk | 2 +- keyboards/bakeneko65/rev3/rules.mk | 2 +- keyboards/bantam44/rules.mk | 2 +- keyboards/barleycorn/rules.mk | 2 +- keyboards/barleycorn_smd/rules.mk | 2 +- keyboards/barracuda/rules.mk | 2 +- keyboards/basekeys/trifecta/rules.mk | 2 +- keyboards/basketweave/rules.mk | 2 +- keyboards/bastardkb/scylla/rules.mk | 2 +- keyboards/bastardkb/skeletyl/rules.mk | 2 +- keyboards/bastardkb/tbk/rules.mk | 2 +- keyboards/bastardkb/tbkmini/rules.mk | 2 +- keyboards/beatervan/rules.mk | 2 +- keyboards/bemeier/bmek/rev1/rules.mk | 2 +- keyboards/bemeier/bmek/rev2/rules.mk | 2 +- keyboards/bemeier/bmek/rev3/rules.mk | 2 +- keyboards/bfake/rules.mk | 2 +- keyboards/binepad/bn003/rules.mk | 2 +- keyboards/bioi/g60/rules.mk | 2 +- keyboards/bioi/g60ble/rules.mk | 2 +- keyboards/bioi/morgan65/rules.mk | 2 +- keyboards/bioi/s65/rules.mk | 2 +- keyboards/blackplum/rules.mk | 2 +- keyboards/boardrun/bizarre/rules.mk | 2 +- keyboards/boardrun/classic/rules.mk | 2 +- keyboards/boardsource/3x4/rules.mk | 2 +- keyboards/boardsource/4x12/rules.mk | 2 +- keyboards/boardsource/5x12/rules.mk | 2 +- keyboards/boardsource/beiwagon/rules.mk | 2 +- keyboards/boardsource/holiday/spooky/rules.mk | 2 +- keyboards/boardsource/technik_o/rules.mk | 2 +- keyboards/boardsource/technik_s/rules.mk | 2 +- keyboards/boardsource/the_mark/rules.mk | 2 +- keyboards/boardwalk/keymaps/niclake/rules.mk | 2 +- keyboards/bobpad/rules.mk | 2 +- keyboards/bop/rules.mk | 2 +- keyboards/boston/rules.mk | 2 +- keyboards/botanicalkeyboards/fm2u/rules.mk | 2 +- keyboards/box75/rules.mk | 2 +- keyboards/bpiphany/pegasushoof/keymaps/blowrak/rules.mk | 2 +- keyboards/bpiphany/pegasushoof/keymaps/default/rules.mk | 2 +- .../bpiphany/pegasushoof/keymaps/default_jis/rules.mk | 2 +- keyboards/bpiphany/pegasushoof/rules.mk | 2 +- keyboards/bpiphany/unloved_bastard/rules.mk | 2 +- keyboards/buildakb/potato65/rules.mk | 2 +- keyboards/buildakb/potato65hs/rules.mk | 2 +- keyboards/c39/keymaps/drashna/rules.mk | 2 +- keyboards/caffeinated/serpent65/rules.mk | 2 +- keyboards/cannonkeys/aella/rules.mk | 2 +- keyboards/cannonkeys/an_c/rules.mk | 2 +- keyboards/cannonkeys/atlas/rules.mk | 2 +- keyboards/cannonkeys/atlas_alps/rules.mk | 2 +- keyboards/cannonkeys/balance/rules.mk | 2 +- keyboards/cannonkeys/chimera65/rules.mk | 2 +- keyboards/cannonkeys/db60/rules.mk | 2 +- keyboards/cannonkeys/devastatingtkl/rules.mk | 2 +- keyboards/cannonkeys/instant60/rules.mk | 2 +- keyboards/cannonkeys/instant65/rules.mk | 2 +- keyboards/cannonkeys/iron165/rules.mk | 2 +- keyboards/cannonkeys/obliterated75/rules.mk | 2 +- keyboards/cannonkeys/onyx/rules.mk | 2 +- keyboards/cannonkeys/rekt1800/rules.mk | 2 +- keyboards/cannonkeys/sagittarius/rules.mk | 2 +- keyboards/cannonkeys/satisfaction75/rules.mk | 2 +- keyboards/cannonkeys/savage65/rules.mk | 2 +- keyboards/cannonkeys/tmov2/rules.mk | 2 +- keyboards/cannonkeys/tsukuyomi/rules.mk | 2 +- keyboards/cannonkeys/vicious40/rules.mk | 2 +- keyboards/capsunlocked/cu65/rules.mk | 2 +- keyboards/capsunlocked/cu7/rules.mk | 2 +- keyboards/capsunlocked/cu80/v2_ansi/info.json | 2 +- keyboards/capsunlocked/cu80/v2_iso/info.json | 2 +- keyboards/carbo65/rules.mk | 2 +- keyboards/cest73/tkm/rules.mk | 2 +- keyboards/charue/sunsetter/rules.mk | 2 +- keyboards/chavdai40/rev1/rules.mk | 2 +- keyboards/chavdai40/rev2/rules.mk | 2 +- keyboards/checkerboards/axon40/rules.mk | 2 +- keyboards/checkerboards/candybar_ortho/rules.mk | 2 +- keyboards/checkerboards/g_idb60/rules.mk | 2 +- keyboards/checkerboards/nop60/rules.mk | 2 +- keyboards/checkerboards/quark_squared/rules.mk | 2 +- keyboards/checkerboards/ud40_ortho_alt/rules.mk | 2 +- keyboards/cherrybstudio/cb1800/rules.mk | 2 +- keyboards/cherrybstudio/cb87/rules.mk | 2 +- keyboards/cheshire/curiosity/rules.mk | 2 +- keyboards/chili/rules.mk | 2 +- keyboards/chlx/merro60/rules.mk | 2 +- keyboards/choc_taro/rules.mk | 2 +- keyboards/choco60/rev2/rules.mk | 2 +- keyboards/ck60i/rules.mk | 2 +- keyboards/ckeys/thedora/rules.mk | 2 +- keyboards/clawsome/bookerboard/rules.mk | 2 +- keyboards/clawsome/coupe/rules.mk | 2 +- keyboards/clawsome/doodle/rules.mk | 2 +- keyboards/clawsome/fightpad/rules.mk | 2 +- keyboards/clawsome/gamebuddy/v1_0/rules.mk | 2 +- keyboards/clawsome/gamebuddy/v1_m/rules.mk | 2 +- keyboards/clawsome/hatchback/rules.mk | 2 +- keyboards/clawsome/luggage_rack/rules.mk | 2 +- keyboards/clawsome/numeros/rules.mk | 2 +- keyboards/clawsome/roadster/rules.mk | 2 +- keyboards/clawsome/sedan/rules.mk | 2 +- keyboards/clawsome/sidekick/rules.mk | 2 +- keyboards/clawsome/suv/rules.mk | 2 +- keyboards/cmm_studio/saka68/hotswap/rules.mk | 2 +- keyboards/cmm_studio/saka68/solder/rules.mk | 2 +- keyboards/coarse/cordillera/rules.mk | 2 +- keyboards/coarse/ixora/rules.mk | 2 +- keyboards/coarse/vinta/rules.mk | 2 +- keyboards/compound/rules.mk | 2 +- keyboards/contra/rules.mk | 2 +- keyboards/converter/a1200/miss1200/rules.mk | 2 +- keyboards/converter/a1200/teensy2pp/rules.mk | 2 +- keyboards/converter/modelm_ssk/rules.mk | 2 +- keyboards/cool836a/rules.mk | 2 +- keyboards/coseyfannitutti/discipad/rules.mk | 2 +- keyboards/coseyfannitutti/discipline/rules.mk | 2 +- keyboards/coseyfannitutti/mullet/rules.mk | 2 +- keyboards/coseyfannitutti/mysterium/rules.mk | 2 +- keyboards/coseyfannitutti/romeo/rules.mk | 2 +- keyboards/cozykeys/bloomer/v2/rules.mk | 2 +- keyboards/crazy_keyboard_68/rules.mk | 2 +- keyboards/crbn/rules.mk | 2 +- keyboards/crin/rules.mk | 2 +- keyboards/crkbd/keymaps/vayashiko/rules.mk | 2 +- keyboards/crkbd/rules.mk | 2 +- keyboards/cu80/rules.mk | 2 +- keyboards/custommk/genesis/rev2/rules.mk | 2 +- keyboards/custommk/genesis/rules.mk | 2 +- keyboards/cutie_club/borsdorf/rules.mk | 2 +- keyboards/cutie_club/giant_macro_pad/rules.mk | 2 +- keyboards/cutie_club/wraith/rules.mk | 2 +- keyboards/cx60/rules.mk | 2 +- keyboards/cybergear/macro25/rules.mk | 2 +- keyboards/daji/seis_cinco/rules.mk | 2 +- keyboards/dc01/arrow/rules.mk | 2 +- keyboards/dc01/left/rules.mk | 2 +- keyboards/dc01/numpad/rules.mk | 2 +- keyboards/dc01/right/rules.mk | 2 +- keyboards/delikeeb/flatbread60/rules.mk | 2 +- keyboards/delikeeb/vaguettelite/rules.mk | 2 +- keyboards/delikeeb/vanana/rules.mk | 2 +- keyboards/delikeeb/vaneela/rules.mk | 2 +- keyboards/delikeeb/vaneelaex/rules.mk | 2 +- keyboards/delikeeb/waaffle/rev3/rules.mk | 2 +- keyboards/delilah/rules.mk | 2 +- keyboards/dk60/rules.mk | 2 +- keyboards/dmqdesign/spin/keymaps/spidey3_pad/rules.mk | 2 +- keyboards/do60/rules.mk | 2 +- keyboards/donutcables/scrabblepad/rules.mk | 2 +- keyboards/doppelganger/rules.mk | 2 +- keyboards/doro67/multi/keymaps/konstantin/rules.mk | 2 +- keyboards/doro67/multi/rules.mk | 2 +- keyboards/doro67/regular/rules.mk | 2 +- keyboards/doro67/rgb/rules.mk | 2 +- keyboards/dp60/rules.mk | 2 +- keyboards/draytronics/daisy/rules.mk | 2 +- keyboards/draytronics/elise/rules.mk | 2 +- keyboards/draytronics/scarlet/rules.mk | 2 +- keyboards/dtisaac/dtisaac01/rules.mk | 2 +- keyboards/duck/eagle_viper/v2/rules.mk | 2 +- keyboards/duck/jetfire/rules.mk | 2 +- keyboards/duck/octagon/v1/rules.mk | 2 +- keyboards/duck/octagon/v2/rules.mk | 2 +- keyboards/duck/orion/v3/rules.mk | 2 +- keyboards/duck/tcv3/rules.mk | 2 +- keyboards/ducky/one2mini/1861st/rules.mk | 2 +- keyboards/dumbpad/v0x/rules.mk | 2 +- keyboards/dumbpad/v0x_dualencoder/rules.mk | 2 +- keyboards/dumbpad/v0x_right/rules.mk | 2 +- keyboards/dumbpad/v1x/rules.mk | 2 +- keyboards/dumbpad/v1x_dualencoder/rules.mk | 2 +- keyboards/dumbpad/v1x_right/rules.mk | 2 +- keyboards/durgod/dgk6x/rules.mk | 2 +- keyboards/durgod/k3x0/rules.mk | 2 +- keyboards/dyz/dyz60/rules.mk | 2 +- keyboards/dz60/keymaps/LEdiodes/rules.mk | 2 +- keyboards/dz60/keymaps/konstantin_b/rules.mk | 2 +- keyboards/dz60/keymaps/krusli/rules.mk | 2 +- keyboards/dz60/keymaps/marianas/rules.mk | 2 +- keyboards/dz60/keymaps/mechmerlin/readme.md | 2 +- keyboards/dz60/keymaps/niclake/rules.mk | 2 +- keyboards/dz60/keymaps/pinpox/rules.mk | 2 +- keyboards/dz60/rules.mk | 2 +- keyboards/dztech/bocc/rules.mk | 2 +- keyboards/dztech/dz60rgb/v1/rules.mk | 2 +- keyboards/dztech/dz60rgb/v2/rules.mk | 2 +- keyboards/dztech/dz60rgb/v2_1/rules.mk | 2 +- keyboards/dztech/dz60rgb_ansi/v1/rules.mk | 2 +- keyboards/dztech/dz60rgb_ansi/v2/rules.mk | 2 +- keyboards/dztech/dz60rgb_ansi/v2_1/rules.mk | 2 +- keyboards/dztech/dz60rgb_wkl/v1/rules.mk | 2 +- keyboards/dztech/dz60rgb_wkl/v2/rules.mk | 2 +- keyboards/dztech/dz60rgb_wkl/v2_1/rules.mk | 2 +- keyboards/dztech/dz65rgb/v1/rules.mk | 2 +- keyboards/dztech/dz65rgb/v2/rules.mk | 2 +- keyboards/dztech/dz65rgb/v3/rules.mk | 2 +- keyboards/dztech/dz96/rules.mk | 2 +- keyboards/e88/rules.mk | 2 +- keyboards/earth_rover/rules.mk | 2 +- keyboards/ebastler/isometria_75/rev1/rules.mk | 2 +- keyboards/edc40/rules.mk | 2 +- keyboards/edda/rules.mk | 2 +- keyboards/edi/hardlight/mk1/rules.mk | 2 +- keyboards/eek/rules.mk | 2 +- keyboards/efreet/rules.mk | 2 +- keyboards/eggman/rules.mk | 2 +- keyboards/emajesty/eiri/rules.mk | 2 +- keyboards/emi20/rules.mk | 2 +- keyboards/eniigmakeyboards/ek60/rules.mk | 2 +- keyboards/eniigmakeyboards/ek65/rules.mk | 2 +- keyboards/eniigmakeyboards/ek87/rules.mk | 2 +- keyboards/ep/comsn/hs68/rules.mk | 2 +- keyboards/ep/comsn/mollydooker/rules.mk | 2 +- keyboards/ep/comsn/tf_longeboye/rules.mk | 2 +- keyboards/epoch80/rules.mk | 2 +- keyboards/ergoarrows/rules.mk | 2 +- keyboards/ergosaurus/rules.mk | 2 +- keyboards/ergotravel/keymaps/yanfali/rules.mk | 2 +- keyboards/ericrlau/numdiscipline/rev1/rules.mk | 2 +- keyboards/esca/getawayvan/rules.mk | 2 +- keyboards/espectro/rules.mk | 2 +- keyboards/evolv/rules.mk | 2 +- keyboards/evyd13/atom47/rules.mk | 2 +- keyboards/evyd13/eon40/rules.mk | 2 +- keyboards/evyd13/eon65/rules.mk | 2 +- keyboards/evyd13/eon75/rules.mk | 2 +- keyboards/evyd13/eon87/rules.mk | 2 +- keyboards/evyd13/eon95/rules.mk | 2 +- keyboards/evyd13/gh80_1800/rules.mk | 2 +- keyboards/evyd13/gh80_3700/rules.mk | 2 +- keyboards/evyd13/gud70/rules.mk | 2 +- keyboards/evyd13/nt660/rules.mk | 2 +- keyboards/evyd13/nt750/rules.mk | 2 +- keyboards/evyd13/nt980/rules.mk | 2 +- keyboards/evyd13/omrontkl/rules.mk | 2 +- keyboards/evyd13/plain60/keymaps/kwerdenker/rules.mk | 2 +- keyboards/evyd13/plain60/rules.mk | 2 +- keyboards/evyd13/pockettype/rules.mk | 2 +- keyboards/evyd13/quackfire/rules.mk | 2 +- keyboards/evyd13/solheim68/rules.mk | 2 +- keyboards/evyd13/ta65/rules.mk | 2 +- keyboards/evyd13/wasdat/keymaps/konstantin/rules.mk | 2 +- keyboards/evyd13/wasdat/rules.mk | 2 +- keyboards/evyd13/wasdat_code/rules.mk | 2 +- keyboards/evyd13/wonderland/rules.mk | 2 +- keyboards/exclusive/e65/rules.mk | 2 +- keyboards/exclusive/e6_rgb/rules.mk | 2 +- keyboards/exclusive/e7v1/rules.mk | 2 +- keyboards/exclusive/e7v1se/rules.mk | 2 +- keyboards/exclusive/e85/rules.mk | 2 +- keyboards/ez_maker/directpins/promicro/info.json | 2 +- keyboards/ez_maker/directpins/proton_c/info.json | 2 +- keyboards/ez_maker/directpins/teensy_2/info.json | 2 +- keyboards/ez_maker/directpins/teensy_2pp/info.json | 2 +- keyboards/ez_maker/directpins/teensy_32/info.json | 2 +- keyboards/ez_maker/directpins/teensy_lc/info.json | 2 +- keyboards/fallacy/rules.mk | 2 +- keyboards/feels/feels65/rules.mk | 2 +- keyboards/felix/rules.mk | 2 +- keyboards/ferris/0_2/rules.mk | 2 +- keyboards/ferris/keymaps/madhatter/rules.mk | 2 +- keyboards/ffkeebs/siris/rules.mk | 2 +- keyboards/fjlabs/bks65/rules.mk | 2 +- keyboards/fjlabs/bks65solder/rules.mk | 2 +- keyboards/fjlabs/bolsa65/rules.mk | 2 +- keyboards/fjlabs/kf87/rules.mk | 2 +- keyboards/fjlabs/ldk65/rules.mk | 2 +- keyboards/fjlabs/midway60/rules.mk | 2 +- keyboards/fjlabs/polaris/rules.mk | 2 +- keyboards/fjlabs/ready100/rules.mk | 2 +- keyboards/flehrad/numbrero/rules.mk | 2 +- keyboards/flehrad/snagpad/rules.mk | 2 +- keyboards/flehrad/tradestation/rules.mk | 2 +- keyboards/flx/lodestone/rules.mk | 2 +- keyboards/flx/virgo/rules.mk | 2 +- keyboards/flygone60/rev3/rules.mk | 2 +- keyboards/foostan/cornelius/rules.mk | 2 +- keyboards/for_science/rules.mk | 2 +- keyboards/forever65/info.json | 2 +- keyboards/four_banger/rules.mk | 2 +- keyboards/foxlab/key65/hotswap/rules.mk | 2 +- keyboards/foxlab/key65/universal/rules.mk | 2 +- keyboards/foxlab/leaf60/hotswap/rules.mk | 2 +- keyboards/foxlab/leaf60/universal/rules.mk | 2 +- keyboards/foxlab/time80/rules.mk | 2 +- keyboards/foxlab/time_re/hotswap/rules.mk | 2 +- keyboards/foxlab/time_re/universal/rules.mk | 2 +- keyboards/fr4/southpaw75/rules.mk | 2 +- keyboards/fr4/unix60/rules.mk | 2 +- keyboards/fractal/rules.mk | 2 +- keyboards/freyr/rules.mk | 2 +- keyboards/friedrich/rules.mk | 2 +- keyboards/frooastboard/rules.mk | 2 +- keyboards/function96/v1/rules.mk | 2 +- keyboards/function96/v2/rules.mk | 2 +- keyboards/funky40/rules.mk | 2 +- keyboards/gboards/gergoplex/rules.mk | 2 +- keyboards/geekboards/macropad_v2/rules.mk | 2 +- keyboards/geekboards/tester/rules.mk | 2 +- keyboards/geminate60/rules.mk | 2 +- keyboards/generic_panda/panda65_01/rules.mk | 2 +- keyboards/genone/eclipse_65/rules.mk | 2 +- keyboards/genone/g1_65/rules.mk | 2 +- keyboards/gergo/rules.mk | 2 +- keyboards/ggkeyboards/genesis/hotswap/rules.mk | 2 +- keyboards/ggkeyboards/genesis/solder/rules.mk | 2 +- keyboards/gh60/revc/rules.mk | 2 +- keyboards/gh60/satan/keymaps/denolfe/rules.mk | 2 +- keyboards/gh60/satan/keymaps/iso_split_rshift/rules.mk | 2 +- keyboards/gh60/satan/keymaps/olligranlund_iso/rules.mk | 2 +- keyboards/gh60/satan/rules.mk | 2 +- keyboards/gh60/v1p3/rules.mk | 2 +- keyboards/gingham/rules.mk | 2 +- keyboards/gkeyboard/gkb_m16/rules.mk | 2 +- keyboards/gmmk/pro/ansi/keymaps/jonavin/rules.mk | 2 +- keyboards/gmmk/pro/ansi/keymaps/paddlegame/rules.mk | 2 +- keyboards/gmmk/pro/ansi/rules.mk | 2 +- keyboards/gmmk/pro/iso/rules.mk | 2 +- keyboards/gorthage_truck/rules.mk | 2 +- keyboards/gray_studio/space65/rules.mk | 2 +- keyboards/gray_studio/think65/hotswap/rules.mk | 2 +- keyboards/gray_studio/think65/solder/rules.mk | 2 +- keyboards/grid600/press/rules.mk | 2 +- keyboards/gvalchca/ga150/rules.mk | 2 +- keyboards/gvalchca/spaccboard/rules.mk | 2 +- keyboards/h0oni/hotduck/rules.mk | 2 +- keyboards/hadron/ver3/rules.mk | 2 +- keyboards/halberd/rules.mk | 2 +- keyboards/hand88/rules.mk | 2 +- keyboards/handwired/2x5keypad/rules.mk | 2 +- keyboards/handwired/3dp660/rules.mk | 2 +- keyboards/handwired/412_64/rules.mk | 2 +- keyboards/handwired/aek64/rules.mk | 2 +- keyboards/handwired/aim65/rules.mk | 2 +- keyboards/handwired/amigopunk/rules.mk | 2 +- keyboards/handwired/angel/rules.mk | 2 +- keyboards/handwired/arrow_pad/keymaps/pad_21/rules.mk | 2 +- keyboards/handwired/arrow_pad/keymaps/pad_24/rules.mk | 2 +- keyboards/handwired/arrow_pad/rules.mk | 2 +- keyboards/handwired/axon/rules.mk | 2 +- keyboards/handwired/battleship_gamepad/rules.mk | 2 +- keyboards/handwired/bigmac/rules.mk | 2 +- keyboards/handwired/bolek/rules.mk | 2 +- keyboards/handwired/boss566y/redragon_vara/rules.mk | 2 +- keyboards/handwired/brain/rules.mk | 2 +- keyboards/handwired/cans12er/rules.mk | 2 +- keyboards/handwired/co60/rev1/rules.mk | 2 +- keyboards/handwired/colorlice/rules.mk | 2 +- keyboards/handwired/concertina/64key/rules.mk | 2 +- keyboards/handwired/consolekeyboard/18key/rules.mk | 2 +- keyboards/handwired/consolekeyboard/20key/rules.mk | 2 +- keyboards/handwired/consolekeyboard/27key/rules.mk | 2 +- keyboards/handwired/consolekeyboard/30key/rules.mk | 2 +- keyboards/handwired/curiosity/rules.mk | 2 +- keyboards/handwired/dactyl_manuform/5x6_2_5/rules.mk | 2 +- .../dactyl_manuform/5x6_5/keymaps/cykedev/rules.mk | 2 +- keyboards/handwired/dactyl_manuform/5x6_5/rules.mk | 2 +- keyboards/handwired/ddg_56/rules.mk | 2 +- keyboards/handwired/eagleii/rules.mk | 2 +- keyboards/handwired/elrgo_s/rules.mk | 2 +- keyboards/handwired/ergocheap/rules.mk | 2 +- keyboards/handwired/fc200rt_qmk/rules.mk | 2 +- keyboards/handwired/frankie_macropad/rules.mk | 2 +- keyboards/handwired/fruity60/rules.mk | 2 +- keyboards/handwired/hexon38/rules.mk | 2 +- keyboards/handwired/hnah108/rules.mk | 2 +- keyboards/handwired/hnah40rgb/rules.mk | 2 +- keyboards/handwired/ibm_wheelwriter/rules.mk | 2 +- keyboards/handwired/juliet/rules.mk | 2 +- keyboards/handwired/k_numpad17/rules.mk | 2 +- keyboards/handwired/leftynumpad/rules.mk | 2 +- keyboards/handwired/marauder/rules.mk | 2 +- .../handwired/minorca/keymaps/ridingqwerty/rules.mk | 2 +- keyboards/handwired/minorca/rules.mk | 2 +- keyboards/handwired/obuwunkunubi/spaget/rules.mk | 2 +- keyboards/handwired/oem_ansi_fullsize/rules.mk | 2 +- keyboards/handwired/oem_iso_fullsize/rules.mk | 2 +- keyboards/handwired/p65rgb/rules.mk | 2 +- keyboards/handwired/postageboard/mini/rules.mk | 2 +- keyboards/handwired/postageboard/r1/rules.mk | 2 +- keyboards/handwired/prkl30/feather/rules.mk | 2 +- keyboards/handwired/retro_refit/rules.mk | 2 +- keyboards/handwired/riblee_f401/rules.mk | 2 +- keyboards/handwired/riblee_f411/rules.mk | 2 +- keyboards/handwired/selene/rules.mk | 2 +- keyboards/handwired/sick_pad/rules.mk | 2 +- keyboards/handwired/sono1/rules.mk | 2 +- keyboards/handwired/space_oddity/rules.mk | 2 +- keyboards/handwired/split89/rules.mk | 2 +- keyboards/handwired/stream_cheap/2x3/rules.mk | 2 +- keyboards/handwired/stream_cheap/2x4/rules.mk | 2 +- keyboards/handwired/stream_cheap/2x5/rules.mk | 2 +- keyboards/handwired/swiftrax/astro65/rules.mk | 2 +- keyboards/handwired/swiftrax/bebol/rules.mk | 2 +- keyboards/handwired/swiftrax/beegboy/rules.mk | 2 +- keyboards/handwired/swiftrax/cowfish/rules.mk | 2 +- keyboards/handwired/swiftrax/equator/rules.mk | 2 +- keyboards/handwired/swiftrax/joypad/rules.mk | 2 +- keyboards/handwired/swiftrax/koalafications/rules.mk | 2 +- keyboards/handwired/swiftrax/nodu/rules.mk | 2 +- keyboards/handwired/swiftrax/pandamic/rules.mk | 2 +- keyboards/handwired/swiftrax/the_galleon/rules.mk | 2 +- keyboards/handwired/swiftrax/unsplit/rules.mk | 2 +- keyboards/handwired/swiftrax/walter/rules.mk | 2 +- keyboards/handwired/symmetric70_proto/promicro/rules.mk | 2 +- keyboards/handwired/symmetric70_proto/proton_c/rules.mk | 2 +- keyboards/handwired/symmetry60/rules.mk | 2 +- keyboards/handwired/t111/rules.mk | 2 +- keyboards/handwired/tennie/rules.mk | 2 +- keyboards/handwired/tractyl_manuform/4x6_right/rules.mk | 2 +- keyboards/handwired/tractyl_manuform/5x6_right/rules.mk | 2 +- keyboards/handwired/tritium_numpad/rules.mk | 2 +- keyboards/handwired/videowriter/rules.mk | 2 +- keyboards/handwired/wabi/rules.mk | 2 +- keyboards/handwired/wulkan/rules.mk | 2 +- keyboards/handwired/xealousbrown/rules.mk | 2 +- keyboards/handwired/z150/rules.mk | 2 +- keyboards/handwired/zergo/rules.mk | 2 +- keyboards/hardlineworks/otd_plus/rules.mk | 2 +- keyboards/hecomi/rules.mk | 2 +- keyboards/hhkb/ansi/rules.mk | 2 +- keyboards/hhkb/jp/rules.mk | 2 +- keyboards/hhkb_lite_2/rules.mk | 2 +- keyboards/hid_liber/keymaps/bakageta/rules.mk | 2 +- keyboards/hid_liber/rules.mk | 2 +- keyboards/hidtech/bastyl/rules.mk | 2 +- keyboards/hineybush/h10/rules.mk | 2 +- keyboards/hineybush/h60/rules.mk | 2 +- keyboards/hineybush/h660s/rules.mk | 2 +- keyboards/hineybush/h75_singa/rules.mk | 2 +- keyboards/hineybush/h87a/rules.mk | 2 +- keyboards/hineybush/h88/rules.mk | 2 +- keyboards/hineybush/hbcp/rules.mk | 2 +- keyboards/hineybush/physix/rules.mk | 2 +- keyboards/hineybush/sm68/rules.mk | 2 +- keyboards/holyswitch/southpaw75/rules.mk | 2 +- keyboards/hotdox/rules.mk | 2 +- keyboards/hp69/rules.mk | 2 +- keyboards/hs60/v2/ansi/rules.mk | 2 +- keyboards/hs60/v2/hhkb/rules.mk | 2 +- keyboards/hs60/v2/iso/rules.mk | 2 +- keyboards/hub16/keymaps/peepeetee/rules.mk | 2 +- keyboards/hub16/rules.mk | 2 +- keyboards/hub20/rules.mk | 2 +- keyboards/ianklug/grooveboard/rules.mk | 2 +- keyboards/ibm/model_m_4th_gen/overnumpad_1xb/rules.mk | 2 +- keyboards/id67/rules.mk | 2 +- keyboards/id80/rules.mk | 2 +- keyboards/id87/rules.mk | 2 +- keyboards/idb/idb_60/rules.mk | 2 +- keyboards/illuminati/is0/rules.mk | 2 +- keyboards/illusion/rosa/rules.mk | 2 +- keyboards/ilumkb/primus75/rules.mk | 2 +- keyboards/ilumkb/volcano660/rules.mk | 2 +- keyboards/inett_studio/sqx/hotswap/rules.mk | 2 +- keyboards/inett_studio/sqx/universal/rules.mk | 2 +- keyboards/irene/rules.mk | 2 +- keyboards/iriskeyboards/rules.mk | 2 +- keyboards/iron180/rules.mk | 2 +- keyboards/j80/rules.mk | 2 +- keyboards/jacky_studio/bear_65/rules.mk | 2 +- keyboards/jacky_studio/s7_elephant/rev2/rules.mk | 2 +- keyboards/jae/j01/rules.mk | 2 +- keyboards/jagdpietr/drakon/rules.mk | 2 +- keyboards/jc65/v32a/rules.mk | 2 +- keyboards/jd40/rules.mk | 2 +- keyboards/jd45/rules.mk | 2 +- keyboards/jisplit89/rules.mk | 2 +- keyboards/jkdlab/binary_monkey/rules.mk | 2 +- keyboards/jm60/rules.mk | 2 +- keyboards/just60/rules.mk | 2 +- keyboards/kabedon/kabedon78s/rules.mk | 2 +- keyboards/kabedon/kabedon980/rules.mk | 2 +- keyboards/kabedon/kabedon98e/rules.mk | 2 +- keyboards/kapcave/gskt00/rules.mk | 2 +- keyboards/kb_elmo/67mk_e/rules.mk | 2 +- keyboards/kb_elmo/aek2_usb/rules.mk | 2 +- keyboards/kb_elmo/elmopad/rules.mk | 2 +- keyboards/kb_elmo/m0110a_usb/rules.mk | 2 +- keyboards/kb_elmo/m0116_usb/rules.mk | 2 +- keyboards/kb_elmo/noah_avr/rules.mk | 2 +- keyboards/kb_elmo/qez/rules.mk | 2 +- keyboards/kb_elmo/sesame/rules.mk | 2 +- keyboards/kb_elmo/twelvekey/rules.mk | 2 +- keyboards/kbdfans/bella/rgb/rules.mk | 2 +- keyboards/kbdfans/bella/rgb_iso/rules.mk | 2 +- keyboards/kbdfans/bella/soldered/rules.mk | 2 +- keyboards/kbdfans/kbd19x/rules.mk | 2 +- keyboards/kbdfans/kbd4x/rules.mk | 2 +- keyboards/kbdfans/kbd66/rules.mk | 2 +- .../kbd67/hotswap/keymaps/brandonschlack/rules.mk | 2 +- keyboards/kbdfans/kbd67/hotswap/rules.mk | 2 +- keyboards/kbdfans/kbd67/mkii_soldered/rules.mk | 2 +- keyboards/kbdfans/kbd67/mkiirgb/v1/rules.mk | 2 +- keyboards/kbdfans/kbd67/mkiirgb/v2/rules.mk | 2 +- keyboards/kbdfans/kbd67/mkiirgb/v3/rules.mk | 2 +- keyboards/kbdfans/kbd67/rev1/rules.mk | 2 +- keyboards/kbdfans/kbd67/rev2/keymaps/tucznak/rules.mk | 2 +- keyboards/kbdfans/kbd67/rev2/rules.mk | 2 +- keyboards/kbdfans/kbd6x/keymaps/konstantin/rules.mk | 2 +- keyboards/kbdfans/kbd6x/rules.mk | 2 +- keyboards/kbdfans/kbd75/keymaps/noroadsleft/rules.mk | 2 +- keyboards/kbdfans/kbd75/keymaps/tucznak/rules.mk | 2 +- keyboards/kbdfans/kbd75/rev1/rules.mk | 2 +- keyboards/kbdfans/kbd75/rev2/rules.mk | 2 +- keyboards/kbdfans/kbd8x_mk2/rules.mk | 2 +- keyboards/kbdfans/kbdmini/rules.mk | 2 +- keyboards/kbdfans/kbdpad_mk2/rules.mk | 2 +- keyboards/kbdfans/maja/rules.mk | 2 +- keyboards/kbdfans/maja_soldered/rules.mk | 2 +- keyboards/kc60/keymaps/stanleylai/rules.mk | 2 +- keyboards/kc60/keymaps/wigguno/rules.mk | 2 +- keyboards/kc60/rules.mk | 2 +- keyboards/kc60se/readme.md | 6 +++--- keyboards/kc60se/rules.mk | 2 +- keyboards/keebio/bdn9/rev2/rules.mk | 2 +- keyboards/keebio/choconum/rules.mk | 2 +- keyboards/keebio/dilly/rules.mk | 2 +- keyboards/keebio/dsp40/rev1/rules.mk | 2 +- keyboards/keebio/foldkb/rules.mk | 2 +- keyboards/keebio/iris/keymaps/ddone/rules.mk | 2 +- keyboards/keebio/iris/keymaps/vyolle/rules.mk | 2 +- keyboards/keebio/kbo5000/rules.mk | 2 +- keyboards/keebio/levinson/keymaps/steno/rules.mk | 2 +- keyboards/keebio/nyquist/keymaps/danielhklein/rules.mk | 2 +- keyboards/keebio/quefrency/keymaps/bjohnson/rules.mk | 2 +- keyboards/keebio/sinc/rules.mk | 2 +- keyboards/keebio/stick/rules.mk | 2 +- keyboards/keebio/wtf60/rules.mk | 2 +- keyboards/keebsforall/freebird60/rules.mk | 2 +- keyboards/keebwerk/mega/ansi/rules.mk | 2 +- keyboards/keebwerk/nano_slider/rules.mk | 2 +- keyboards/keebzdotnet/fme/rules.mk | 2 +- keyboards/keebzdotnet/wazowski/rules.mk | 2 +- keyboards/kelowna/rgb64/rules.mk | 2 +- keyboards/keybage/radpad/rules.mk | 2 +- keyboards/keybee/keybee65/rules.mk | 2 +- keyboards/keyboardio/atreus/rules.mk | 2 +- keyboards/keycapsss/plaid_pad/rules.mk | 2 +- keyboards/keychron/q1/rev_0102/rules.mk | 2 +- keyboards/keyhive/maypad/rules.mk | 2 +- keyboards/keyprez/bison/rules.mk | 2 +- keyboards/keyprez/corgi/rules.mk | 2 +- keyboards/keyprez/rhino/rules.mk | 2 +- keyboards/keysofkings/twokey/rules.mk | 2 +- keyboards/kikoslab/kl90/rules.mk | 2 +- keyboards/kindakeyboards/conone65/rules.mk | 2 +- keyboards/kinesis/nguyenvietyen/rules.mk | 2 +- keyboards/kinesis/rules.mk | 2 +- keyboards/kineticlabs/emu/hotswap/rules.mk | 2 +- keyboards/kineticlabs/emu/soldered/rules.mk | 2 +- keyboards/kingly_keys/ave/ortho/rules.mk | 2 +- keyboards/kingly_keys/ave/staggered/rules.mk | 2 +- keyboards/kingly_keys/little_foot/rules.mk | 2 +- keyboards/kingly_keys/romac/rules.mk | 2 +- keyboards/kingly_keys/romac_plus/rules.mk | 2 +- keyboards/kingly_keys/ropro/rules.mk | 2 +- keyboards/kingly_keys/soap/rules.mk | 2 +- keyboards/kiwikeebs/macro/rules.mk | 2 +- keyboards/kiwikeebs/macro_v2/rules.mk | 2 +- keyboards/kiwikey/kawii9/rules.mk | 2 +- keyboards/kiwikey/wanderland/rules.mk | 2 +- keyboards/kmac/rules.mk | 2 +- keyboards/kmac_pad/rules.mk | 2 +- keyboards/kmini/rules.mk | 2 +- keyboards/knobgoblin/rules.mk | 2 +- keyboards/kona_classic/keymaps/ansi/rules.mk | 2 +- keyboards/kona_classic/keymaps/ansi_arrows/rules.mk | 2 +- keyboards/kona_classic/keymaps/ansi_arrows_lcap/rules.mk | 2 +- keyboards/kona_classic/keymaps/ansi_split/rules.mk | 2 +- .../kona_classic/keymaps/ansi_split_arrows/rules.mk | 2 +- keyboards/kona_classic/keymaps/default/rules.mk | 2 +- keyboards/kona_classic/keymaps/iso/rules.mk | 2 +- keyboards/kona_classic/keymaps/iso_arrows/rules.mk | 2 +- keyboards/kona_classic/keymaps/iso_split/rules.mk | 2 +- keyboards/kona_classic/keymaps/iso_split_arrows/rules.mk | 2 +- keyboards/kopibeng/xt65/rules.mk | 2 +- keyboards/kprepublic/bm16a/rules.mk | 2 +- keyboards/kprepublic/bm16s/rules.mk | 2 +- .../kprepublic/bm40hsrgb/keymaps/gabustoledo/rules.mk | 2 +- keyboards/kprepublic/bm40hsrgb/keymaps/signynt/rules.mk | 2 +- .../kprepublic/bm40hsrgb/keymaps/signynt_2_loud/rules.mk | 2 +- .../bm40hsrgb/keymaps/signynt_2_quiet/rules.mk | 2 +- keyboards/kprepublic/bm40hsrgb/rules.mk | 2 +- keyboards/kprepublic/bm43a/rules.mk | 2 +- keyboards/kprepublic/bm60rgb/rules.mk | 2 +- keyboards/kprepublic/bm60rgb_iso/rules.mk | 2 +- keyboards/kprepublic/bm65iso/rules.mk | 2 +- keyboards/kprepublic/bm68rgb/rules.mk | 2 +- keyboards/kprepublic/cospad/rules.mk | 2 +- keyboards/kprepublic/jj40/keymaps/fun40/rules.mk | 2 +- keyboards/kprepublic/jj40/keymaps/waples/rules.mk | 2 +- keyboards/kprepublic/jj50/rules.mk | 2 +- keyboards/ktec/daisy/rules.mk | 2 +- keyboards/ktec/staryu/rules.mk | 2 +- keyboards/kv/revt/rules.mk | 2 +- keyboards/kwub/bloop/rules.mk | 2 +- keyboards/labyrinth75/rules.mk | 2 +- keyboards/latin17rgb/rules.mk | 2 +- keyboards/latin47ble/rules.mk | 2 +- keyboards/latin60rgb/rules.mk | 2 +- keyboards/latin6rgb/rules.mk | 2 +- keyboards/latinpad/rules.mk | 2 +- keyboards/launchpad/keymaps/brandonschlack/rules.mk | 2 +- keyboards/launchpad/keymaps/drashna/rules.mk | 2 +- keyboards/lazydesigners/bolt/rules.mk | 2 +- keyboards/lazydesigners/cassette8/rules.mk | 2 +- keyboards/lazydesigners/dimple/rules.mk | 2 +- keyboards/lazydesigners/dimpleplus/rules.mk | 2 +- keyboards/lazydesigners/the30/rules.mk | 2 +- keyboards/lazydesigners/the40/rules.mk | 2 +- keyboards/lazydesigners/the60/rev1/rules.mk | 2 +- keyboards/lazydesigners/the60/rev2/rules.mk | 2 +- keyboards/lck75/rules.mk | 2 +- keyboards/le_chiffre/rules.mk | 2 +- keyboards/leafcutterlabs/bigknob/rules.mk | 2 +- keyboards/leeku/finger65/rules.mk | 2 +- keyboards/lets_split/keymaps/pyrol/rules.mk | 2 +- keyboards/lfkeyboards/lfkpad/rules.mk | 2 +- keyboards/lfkeyboards/smk65/rules.mk | 2 +- keyboards/linworks/fave87/rules.mk | 2 +- keyboards/linworks/whale75/rules.mk | 2 +- keyboards/lizard_trick/tenkey_plusplus/rules.mk | 2 +- keyboards/lm_keyboard/lm60n/rules.mk | 2 +- keyboards/longnald/corin/rules.mk | 2 +- keyboards/ls_60/rules.mk | 2 +- keyboards/m3n3van/rules.mk | 2 +- keyboards/m65/rev1/rules.mk | 2 +- keyboards/makrosu/rules.mk | 2 +- keyboards/manta60/rules.mk | 2 +- keyboards/manyboard/macro/rules.mk | 2 +- keyboards/masterworks/classy_tkl/rev_a/rules.mk | 2 +- keyboards/matchstickworks/southpad/rules.mk | 2 +- keyboards/matrix/cain_re/rules.mk | 2 +- keyboards/matrix/falcon/rules.mk | 2 +- keyboards/matrix/m12og/rev2/rules.mk | 2 +- keyboards/matrix/m20add/rules.mk | 2 +- keyboards/matrix/noah/rules.mk | 2 +- keyboards/maxipad/rules.mk | 2 +- keyboards/maxr1998/pulse4k/rules.mk | 2 +- keyboards/mb44/rules.mk | 2 +- keyboards/mc_76k/rules.mk | 2 +- keyboards/mechanickeys/undead60m/rules.mk | 2 +- keyboards/mechkeys/mk60/rules.mk | 2 +- keyboards/mechlovin/delphine/rules.mk | 2 +- keyboards/mechlovin/hannah60rgb/rules.mk | 2 +- keyboards/mechlovin/hannah65/rules.mk | 2 +- keyboards/mechlovin/hannah910/rev1/rules.mk | 2 +- keyboards/mechlovin/hannah910/rev2/rules.mk | 2 +- keyboards/mechlovin/hannah910/rev3/rules.mk | 2 +- keyboards/mechlovin/hex4b/rules.mk | 2 +- keyboards/mechlovin/hex6c/rules.mk | 2 +- keyboards/mechlovin/infinity87/rules.mk | 2 +- keyboards/mechlovin/infinity88/rules.mk | 2 +- keyboards/mechlovin/infinityce/rules.mk | 2 +- keyboards/mechlovin/kanu/rules.mk | 2 +- keyboards/mechlovin/mechlovin9/rules.mk | 2 +- keyboards/mechlovin/olly/jf/rules.mk | 2 +- keyboards/mechlovin/serratus/rules.mk | 2 +- keyboards/mechlovin/th1800/rules.mk | 2 +- keyboards/mechlovin/tmkl/rules.mk | 2 +- keyboards/mechmini/v1/rules.mk | 2 +- keyboards/mechmini/v2/keymaps/arkag/rules.mk | 2 +- keyboards/mechmini/v2/keymaps/lbibass_625_space/rules.mk | 2 +- .../mechmini/v2/keymaps/lbibass_split_space/rules.mk | 2 +- keyboards/mechmini/v2/keymaps/wsturgiss/rules.mk | 2 +- keyboards/mechmini/v2/rules.mk | 2 +- keyboards/mechstudio/dawn/rules.mk | 2 +- keyboards/mechstudio/ud_40_ortho/rules.mk | 2 +- keyboards/mechwild/bde/lefty/rules.mk | 2 +- keyboards/mechwild/bde/righty/rules.mk | 2 +- keyboards/mechwild/mercutio/rules.mk | 2 +- keyboards/mechwild/murphpad/rules.mk | 2 +- keyboards/mechwild/obe/rules.mk | 2 +- keyboards/mehkee96/rules.mk | 2 +- keyboards/melgeek/mach80/rev1/rules.mk | 2 +- keyboards/melgeek/mj61/rev1/rules.mk | 2 +- keyboards/melgeek/mj61/rev2/rules.mk | 2 +- keyboards/melgeek/mj63/rev1/rules.mk | 2 +- keyboards/melgeek/mj63/rev2/rules.mk | 2 +- keyboards/melgeek/mj64/rev1/rules.mk | 2 +- keyboards/melgeek/mj64/rev2/rules.mk | 2 +- keyboards/melgeek/mj64/rev3/rules.mk | 2 +- keyboards/melgeek/mj65/rev3/rules.mk | 2 +- keyboards/melgeek/mj6xy/rev3/rules.mk | 2 +- keyboards/melgeek/mojo68/rev1/rules.mk | 2 +- keyboards/melgeek/mojo75/rev1/rules.mk | 2 +- keyboards/melgeek/z70ultra/rev1/rules.mk | 2 +- keyboards/melody96/keymaps/konstantin/rules.mk | 2 +- keyboards/melody96/rules.mk | 2 +- keyboards/merge/um70/rules.mk | 2 +- keyboards/mesa/mesa_tkl/rules.mk | 2 +- keyboards/meson/rules.mk | 2 +- keyboards/metamechs/timberwolf/rules.mk | 2 +- keyboards/mexsistor/ludmila/rules.mk | 2 +- keyboards/miller/gm862/rules.mk | 2 +- keyboards/millipad/rules.mk | 2 +- keyboards/mini_elixivy/rules.mk | 2 +- keyboards/minim/rules.mk | 2 +- keyboards/mio/rules.mk | 2 +- keyboards/misonoworks/chocolatebar/rules.mk | 2 +- keyboards/misonoworks/karina/rules.mk | 2 +- keyboards/misterknife/knife66/rules.mk | 2 +- keyboards/misterknife/knife66_iso/rules.mk | 2 +- keyboards/mnk1800s/rules.mk | 2 +- keyboards/mnk50/rules.mk | 2 +- keyboards/mode/m65s/rules.mk | 2 +- keyboards/model_v/rules.mk | 2 +- keyboards/mokey/mokey64/rules.mk | 2 +- keyboards/molecule/rules.mk | 2 +- keyboards/momoka_ergo/rules.mk | 2 +- keyboards/monstargear/xo87/rgb/rules.mk | 2 +- keyboards/monstargear/xo87/solderable/rules.mk | 2 +- keyboards/montex/rules.mk | 2 +- keyboards/montsinger/rebound/rev1/rules.mk | 2 +- keyboards/montsinger/rebound/rev2/rules.mk | 2 +- keyboards/montsinger/rebound/rev3/rules.mk | 2 +- keyboards/montsinger/rebound/rev4/rules.mk | 2 +- keyboards/montsinger/rewind/rules.mk | 2 +- keyboards/moonlander/keymaps/drashna/rules.mk | 2 +- keyboards/mountainblocks/mb17/rules.mk | 2 +- keyboards/mt40/rules.mk | 2 +- keyboards/mt64rgb/rules.mk | 2 +- keyboards/mt84/rules.mk | 2 +- keyboards/mt980/rules.mk | 2 +- keyboards/mxss/rules.mk | 2 +- keyboards/mysticworks/wyvern/rules.mk | 2 +- keyboards/naiping/np64/rules.mk | 2 +- keyboards/naiping/nphhkb/rules.mk | 2 +- keyboards/naiping/npminila/rules.mk | 2 +- keyboards/naked60/rules.mk | 2 +- keyboards/nebula12/rules.mk | 2 +- keyboards/nebula68/rules.mk | 2 +- keyboards/neito/rules.mk | 2 +- keyboards/nemui/rules.mk | 2 +- keyboards/neokeys/g67/hotswap/rules.mk | 2 +- keyboards/neokeys/g67/soldered/rules.mk | 2 +- keyboards/neopad/rev1/rules.mk | 2 +- keyboards/neson_design/n6/rules.mk | 2 +- keyboards/newgame40/rules.mk | 2 +- keyboards/nibiria/stream15/rules.mk | 2 +- keyboards/nightingale_studios/hailey/rules.mk | 2 +- keyboards/nightly_boards/adellein/rules.mk | 2 +- keyboards/nightly_boards/alter/rev1/rules.mk | 2 +- keyboards/nightly_boards/n2/rules.mk | 2 +- keyboards/nightly_boards/n40_o/rules.mk | 2 +- keyboards/nightly_boards/n60_s/rules.mk | 2 +- keyboards/nightly_boards/n87/rules.mk | 2 +- keyboards/nightly_boards/n9/rules.mk | 2 +- keyboards/nightly_boards/octopad/rules.mk | 2 +- keyboards/nightly_boards/ph_arisu/rules.mk | 2 +- keyboards/nightmare/rules.mk | 2 +- keyboards/nimrod/rules.mk | 2 +- keyboards/nix_studio/oxalys80/rules.mk | 2 +- keyboards/nk1/rules.mk | 2 +- keyboards/nk65/rules.mk | 2 +- keyboards/nk87/rules.mk | 2 +- keyboards/nknl7en/rules.mk | 2 +- keyboards/nknl7jp/rules.mk | 2 +- keyboards/nomu30/rev1/rules.mk | 2 +- keyboards/nomu30/rev2/rules.mk | 2 +- keyboards/nopunin10did/jabberwocky/rules.mk | 2 +- keyboards/nopunin10did/railroad/rev0/rules.mk | 2 +- keyboards/noxary/220/rules.mk | 2 +- keyboards/noxary/260/rules.mk | 2 +- keyboards/noxary/268/rules.mk | 2 +- keyboards/noxary/268_2/rules.mk | 2 +- keyboards/noxary/268_2_rgb/rules.mk | 2 +- keyboards/noxary/280/rules.mk | 2 +- keyboards/noxary/378/rules.mk | 2 +- keyboards/noxary/vulcan/rules.mk | 2 +- keyboards/noxary/x268/rules.mk | 2 +- keyboards/np12/rules.mk | 2 +- keyboards/ocean/gin_v2/rules.mk | 2 +- keyboards/ocean/slamz/rules.mk | 2 +- keyboards/ocean/stealth/rules.mk | 2 +- keyboards/ocean/wang_ergo/rules.mk | 2 +- keyboards/ocean/wang_v2/rules.mk | 2 +- keyboards/odelia/rules.mk | 2 +- keyboards/ok60/rules.mk | 2 +- keyboards/omnikey_bh/rules.mk | 2 +- keyboards/omnikeyish/rules.mk | 2 +- keyboards/opus/rules.mk | 2 +- keyboards/orange75/rules.mk | 2 +- keyboards/org60/rules.mk | 2 +- keyboards/ortho5by12/rules.mk | 2 +- keyboards/orthocode/rules.mk | 2 +- keyboards/owl8/rules.mk | 2 +- keyboards/owlab/jelly_epoch/hotswap/rules.mk | 2 +- keyboards/owlab/jelly_epoch/soldered/rules.mk | 2 +- keyboards/owlab/voice65/hotswap/rules.mk | 2 +- keyboards/owlab/voice65/soldered/rules.mk | 2 +- keyboards/panc40/rules.mk | 2 +- keyboards/pearl/keymaps/cijanzen/rules.mk | 2 +- keyboards/peej/tripel/rules.mk | 2 +- keyboards/peranekofactory/tone/rev1/rules.mk | 2 +- keyboards/peranekofactory/tone/rev2/rules.mk | 2 +- keyboards/percent/booster/rules.mk | 2 +- keyboards/percent/canoe/rules.mk | 2 +- keyboards/percent/canoe_gen2/rules.mk | 2 +- keyboards/percent/skog/rules.mk | 2 +- keyboards/phantom/rules.mk | 2 +- keyboards/phase_studio/titan65/hotswap/rules.mk | 2 +- keyboards/phase_studio/titan65/soldered/rules.mk | 2 +- keyboards/phoenix/rules.mk | 2 +- keyboards/picolab/frusta_fundamental/rules.mk | 2 +- keyboards/pimentoso/touhoupad/rules.mk | 2 +- keyboards/pisces/rules.mk | 2 +- keyboards/pistachio_mp/rules.mk | 2 +- keyboards/pistachio_pro/rules.mk | 2 +- keyboards/pizzakeyboards/pizza65/rules.mk | 2 +- keyboards/pkb65/rules.mk | 2 +- keyboards/planck/keymaps/buffet/rules.mk | 2 +- keyboards/planck/keymaps/danielhklein/rules.mk | 2 +- keyboards/planck/keymaps/ishtob/rules.mk | 2 +- keyboards/planck/keymaps/orthodeluxe/rules.mk | 2 +- keyboards/planck/keymaps/vifon/rules.mk | 2 +- keyboards/planck/light/rules.mk | 2 +- keyboards/planck/rev1/rules.mk | 2 +- keyboards/planck/rev2/rules.mk | 2 +- keyboards/planck/rev3/rules.mk | 2 +- keyboards/planck/rev4/rules.mk | 2 +- keyboards/planck/rev5/rules.mk | 2 +- keyboards/planck/rev6/rules.mk | 2 +- keyboards/planck/thk/rules.mk | 2 +- keyboards/playkbtw/ca66/rules.mk | 2 +- keyboards/playkbtw/helen80/rules.mk | 2 +- keyboards/playkbtw/pk60/rules.mk | 2 +- keyboards/plexus75/rules.mk | 2 +- keyboards/ploopyco/mouse/rules.mk | 2 +- keyboards/ploopyco/trackball/rules.mk | 2 +- keyboards/ploopyco/trackball_mini/rules.mk | 2 +- keyboards/plume/plume65/rules.mk | 2 +- keyboards/plut0nium/0x3e/rules.mk | 2 +- keyboards/pohjolaworks/louhi/rules.mk | 2 +- keyboards/poker87c/rules.mk | 2 +- keyboards/poker87d/rules.mk | 2 +- keyboards/polycarbdiet/s20/rules.mk | 2 +- keyboards/pom_keyboards/tnln95/rules.mk | 2 +- keyboards/portal_66/rules.mk | 2 +- keyboards/pos78/rules.mk | 2 +- keyboards/preonic/keymaps/arkag/rules.mk | 2 +- keyboards/preonic/keymaps/dlaroe/rules.mk | 2 +- keyboards/preonic/rev1/rules.mk | 2 +- keyboards/preonic/rev2/rules.mk | 2 +- keyboards/preonic/rev3/rules.mk | 2 +- keyboards/primekb/meridian/rules.mk | 2 +- keyboards/primekb/prime_e/rules.mk | 2 +- keyboards/primekb/prime_r/rules.mk | 2 +- keyboards/program_yoink/rules.mk | 2 +- keyboards/projectcain/vault45/rules.mk | 2 +- keyboards/projectkb/alice/rev1/rules.mk | 2 +- keyboards/projectkb/alice/rev2/rules.mk | 2 +- keyboards/prototypist/j01/rules.mk | 2 +- keyboards/pursuit40/rules.mk | 2 +- keyboards/q4z/rules.mk | 2 +- keyboards/qaz/rules.mk | 2 +- keyboards/quad_h/lb75/rules.mk | 2 +- keyboards/quantrik/kyuu/rules.mk | 2 +- keyboards/quark/rules.mk | 2 +- keyboards/qvex/lynepad/rules.mk | 2 +- keyboards/rabbit_capture_plan/rules.mk | 2 +- keyboards/rainkeeb/rules.mk | 2 +- keyboards/ramonimbao/aelith/rules.mk | 2 +- keyboards/ramonimbao/chevron/rules.mk | 2 +- keyboards/ramonimbao/herringbone/pro/rules.mk | 2 +- keyboards/ramonimbao/herringbone/v1/rules.mk | 2 +- keyboards/ramonimbao/mona/v1/rules.mk | 2 +- keyboards/ramonimbao/mona/v1_1/rules.mk | 2 +- keyboards/ramonimbao/tkl_ff/rules.mk | 2 +- keyboards/ramonimbao/wete/keymaps/via/rules.mk | 2 +- keyboards/rart/rart45/rules.mk | 2 +- keyboards/rart/rart4x4/rules.mk | 2 +- keyboards/rart/rart67/rules.mk | 2 +- keyboards/rart/rart75/rules.mk | 2 +- keyboards/rart/rart75m/rules.mk | 2 +- keyboards/rart/rartand/rules.mk | 2 +- keyboards/rart/rartland/rules.mk | 2 +- keyboards/rart/rartlite/rules.mk | 2 +- keyboards/rart/rartpad/rules.mk | 2 +- keyboards/retro_75/rules.mk | 2 +- keyboards/reversestudio/decadepad/rules.mk | 2 +- keyboards/rgbkb/pan/rules.mk | 2 +- keyboards/rgbkb/sol/keymaps/default/readme.md | 2 +- keyboards/rgbkb/sol/keymaps/xyverz/readme.md | 2 +- keyboards/rgbkb/zygomorph/keymaps/default/readme.md | 2 +- keyboards/rgbkb/zygomorph/keymaps/kageurufu/readme.md | 2 +- keyboards/rocketboard_16/rules.mk | 2 +- keyboards/rominronin/katana60/rev1/rules.mk | 2 +- keyboards/roseslite/rules.mk | 2 +- keyboards/rotr/rules.mk | 2 +- keyboards/rpiguy9907/southpaw66/rules.mk | 2 +- keyboards/runes/vaengr/rules.mk | 2 +- keyboards/ryanbaekr/rb86/rules.mk | 2 +- keyboards/ryloo_studio/m0110/rules.mk | 2 +- keyboards/sam/s80/rules.mk | 2 +- keyboards/sam/sg81m/rules.mk | 2 +- keyboards/sanctified/dystopia/rules.mk | 2 +- keyboards/satt/vision/rules.mk | 2 +- keyboards/sawnsprojects/satxri6key/rules.mk | 2 +- keyboards/scarletbandana/rules.mk | 2 +- keyboards/scatter42/rules.mk | 2 +- keyboards/sck/gtm/rules.mk | 2 +- keyboards/sck/m0116b/rules.mk | 2 +- keyboards/sck/neiso/rules.mk | 2 +- keyboards/sck/osa/rules.mk | 2 +- keyboards/scythe/rules.mk | 2 +- keyboards/seigaiha/rules.mk | 2 +- keyboards/sekigon/grs_70ec/rules.mk | 2 +- keyboards/senselessclay/had60/rules.mk | 2 +- keyboards/sentraq/s60_x/default/rules.mk | 2 +- keyboards/sentraq/s60_x/keymaps/ansi_qwertz/rules.mk | 2 +- keyboards/sentraq/s60_x/rgb/rules.mk | 2 +- keyboards/sentraq/s65_plus/rules.mk | 2 +- keyboards/sentraq/s65_x/rules.mk | 2 +- keyboards/sets3n/kk980/rules.mk | 2 +- keyboards/shambles/rules.mk | 2 +- keyboards/shk9/rules.mk | 2 +- keyboards/sidderskb/majbritt/rev2/rules.mk | 2 +- keyboards/silverbullet44/rules.mk | 2 +- keyboards/sirius/uni660/rev1/rules.mk | 2 +- keyboards/sirius/uni660/rev2/rules.mk | 2 +- keyboards/sirius/unigo66/rules.mk | 2 +- keyboards/skeletn87/hotswap/rules.mk | 2 +- keyboards/skeletn87/soldered/rules.mk | 2 +- keyboards/skergo/rules.mk | 2 +- keyboards/slz40/rules.mk | 2 +- keyboards/smallice/rules.mk | 2 +- keyboards/smallkeyboard/rules.mk | 2 +- keyboards/smk60/rules.mk | 2 +- keyboards/snampad/rules.mk | 2 +- keyboards/sneakbox/aliceclone/rules.mk | 2 +- keyboards/sneakbox/ava/rules.mk | 2 +- keyboards/sneakbox/disarray/ortho/rules.mk | 2 +- keyboards/sneakbox/disarray/staggered/rules.mk | 2 +- keyboards/soup10/rules.mk | 2 +- keyboards/southpole/rules.mk | 2 +- keyboards/sowbug/68keys/rules.mk | 2 +- keyboards/sowbug/ansi_tkl/rules.mk | 2 +- keyboards/soy20/rules.mk | 2 +- keyboards/space_space/rev1/rules.mk | 2 +- keyboards/space_space/rev2/rules.mk | 2 +- keyboards/spaceman/pancake/rev1/feather/rules.mk | 2 +- keyboards/spaceman/pancake/rev1/promicro/rules.mk | 2 +- keyboards/spaceman/pancake/rev2/rules.mk | 2 +- keyboards/spaceman/yun65/rules.mk | 2 +- keyboards/spacey/rules.mk | 2 +- keyboards/sparrow62/rules.mk | 2 +- keyboards/specskeys/rules.mk | 2 +- keyboards/spiderisland/split78/rules.mk | 2 +- keyboards/splitish/rules.mk | 2 +- keyboards/splitkb/kyria/keymaps/drashna/rules.mk | 2 +- keyboards/splitkb/zima/rules.mk | 2 +- keyboards/splitreus62/rules.mk | 2 +- keyboards/standaside/rules.mk | 2 +- keyboards/stella/rules.mk | 2 +- keyboards/stratos/rules.mk | 2 +- keyboards/studiokestra/cascade/rules.mk | 2 +- keyboards/studiokestra/nue/rules.mk | 2 +- keyboards/suihankey/rules.mk | 2 +- keyboards/swiftrax/retropad/rules.mk | 2 +- keyboards/switchplate/southpaw_65/rules.mk | 2 +- keyboards/switchplate/southpaw_fullsize/rules.mk | 2 +- keyboards/switchplate/switchplate910/rules.mk | 2 +- keyboards/sx60/rules.mk | 2 +- keyboards/tada68/keymaps/abishalom/rules.mk | 2 +- keyboards/tada68/keymaps/dlg/rules.mk | 2 +- keyboards/takashicompany/endzone34/rules.mk | 2 +- keyboards/taleguers/taleguers75/rules.mk | 2 +- keyboards/team0110/p1800fl/rules.mk | 2 +- keyboards/technika/rules.mk | 2 +- keyboards/tender/macrowo_pad/rules.mk | 2 +- keyboards/tenki/rules.mk | 2 +- keyboards/terrazzo/rules.mk | 2 +- keyboards/tgr/alice/rules.mk | 2 +- keyboards/the_royal/liminal/rules.mk | 2 +- keyboards/the_royal/schwann/rules.mk | 2 +- keyboards/thevankeyboards/bananasplit/rules.mk | 2 +- keyboards/thevankeyboards/caravan/rules.mk | 2 +- keyboards/thevankeyboards/jetvan/rules.mk | 2 +- keyboards/thevankeyboards/minivan/rules.mk | 2 +- keyboards/thevankeyboards/roadkit/rules.mk | 2 +- keyboards/tiger910/rules.mk | 2 +- keyboards/tkc/candybar/lefty/rules.mk | 2 +- keyboards/tkc/candybar/righty/rules.mk | 2 +- keyboards/tkc/godspeed75/rules.mk | 2 +- keyboards/tkc/m0lly/rules.mk | 2 +- keyboards/tkc/osav2/rules.mk | 2 +- keyboards/tkc/portico/rules.mk | 2 +- keyboards/tkc/tkc1800/rules.mk | 2 +- keyboards/tkc/tkl_ab87/rules.mk | 2 +- keyboards/tkw/grandiceps/rules.mk | 2 +- keyboards/tkw/stoutgat/v1/rules.mk | 2 +- keyboards/tkw/stoutgat/v2/rules.mk | 2 +- keyboards/tmo50/rules.mk | 2 +- keyboards/tokyokeyboard/alix40/rules.mk | 2 +- keyboards/tokyokeyboard/tokyo60/rules.mk | 2 +- keyboards/tr60w/rules.mk | 2 +- keyboards/treasure/type9s2/rules.mk | 2 +- keyboards/tszaboo/ortho4exent/rules.mk | 2 +- keyboards/tunks/ergo33/rules.mk | 2 +- keyboards/tw40/rules.mk | 2 +- keyboards/txuu/rules.mk | 2 +- keyboards/ua62/rules.mk | 2 +- keyboards/underscore33/rev1/rules.mk | 2 +- keyboards/underscore33/rev2/rules.mk | 2 +- keyboards/ungodly/launch_pad/rules.mk | 2 +- keyboards/ungodly/nines/rules.mk | 2 +- .../classic_ultracl_post_2013/overnumpad_1xb/rules.mk | 2 +- .../classic_ultracl_pre_2013/overnumpad_1xb/rules.mk | 2 +- .../spacesaver_m_post_2013/overnumpad_1xb/rules.mk | 2 +- .../spacesaver_m_pre_2013/overnumpad_1xb/rules.mk | 2 +- keyboards/unison/keymaps/via/rules.mk | 2 +- keyboards/uno/rules.mk | 2 +- keyboards/ut472/rules.mk | 2 +- keyboards/utd80/rules.mk | 2 +- keyboards/v4n4g0rth0n/v1/rules.mk | 2 +- keyboards/v4n4g0rth0n/v2/rules.mk | 2 +- keyboards/vagrant_10/rules.mk | 2 +- keyboards/viktus/sp111/rules.mk | 2 +- keyboards/viktus/sp_mini/rules.mk | 2 +- keyboards/viktus/styrka/rules.mk | 2 +- keyboards/vn66/rules.mk | 2 +- keyboards/waldo/rules.mk | 2 +- keyboards/walletburner/cajal/rules.mk | 2 +- keyboards/walletburner/neuron/rules.mk | 2 +- keyboards/wekey/we27/rules.mk | 2 +- keyboards/westfoxtrot/prophet/rules.mk | 2 +- keyboards/whale/sk/v3/rules.mk | 2 +- keyboards/wheatfield/blocked65/rules.mk | 2 +- keyboards/whitefox/keymaps/konstantin/rules.mk | 2 +- keyboards/whitefox/rules.mk | 2 +- keyboards/wilba_tech/rama_works_kara/rules.mk | 2 +- keyboards/wilba_tech/rama_works_koyu/rules.mk | 2 +- keyboards/wilba_tech/rama_works_m10_b/rules.mk | 2 +- keyboards/wilba_tech/rama_works_m10_c/rules.mk | 2 +- keyboards/wilba_tech/rama_works_m50_a/rules.mk | 2 +- keyboards/wilba_tech/rama_works_m50_ax/rules.mk | 2 +- keyboards/wilba_tech/rama_works_m60_a/rules.mk | 2 +- keyboards/wilba_tech/rama_works_m65_b/rules.mk | 2 +- keyboards/wilba_tech/rama_works_m65_bx/rules.mk | 2 +- keyboards/wilba_tech/rama_works_m6_a/rules.mk | 2 +- keyboards/wilba_tech/rama_works_m6_b/rules.mk | 2 +- keyboards/wilba_tech/rama_works_u80_a/rules.mk | 2 +- keyboards/wilba_tech/wt60_a/rules.mk | 2 +- keyboards/wilba_tech/wt60_b/rules.mk | 2 +- keyboards/wilba_tech/wt60_bx/rules.mk | 2 +- keyboards/wilba_tech/wt60_c/rules.mk | 2 +- keyboards/wilba_tech/wt60_d/rules.mk | 2 +- keyboards/wilba_tech/wt60_g/rules.mk | 2 +- keyboards/wilba_tech/wt60_g2/rules.mk | 2 +- keyboards/wilba_tech/wt60_h1/rules.mk | 2 +- keyboards/wilba_tech/wt60_h2/rules.mk | 2 +- keyboards/wilba_tech/wt60_h3/rules.mk | 2 +- keyboards/wilba_tech/wt60_xt/rules.mk | 2 +- keyboards/wilba_tech/wt65_a/rules.mk | 2 +- keyboards/wilba_tech/wt65_b/rules.mk | 2 +- keyboards/wilba_tech/wt65_f/rules.mk | 2 +- keyboards/wilba_tech/wt65_fx/rules.mk | 2 +- keyboards/wilba_tech/wt65_g/rules.mk | 2 +- keyboards/wilba_tech/wt65_g2/rules.mk | 2 +- keyboards/wilba_tech/wt65_h1/rules.mk | 2 +- keyboards/wilba_tech/wt65_xt/rules.mk | 2 +- keyboards/wilba_tech/wt65_xtx/rules.mk | 2 +- keyboards/wilba_tech/wt69_a/rules.mk | 2 +- keyboards/wilba_tech/wt70_jb/rules.mk | 2 +- keyboards/wilba_tech/wt75_a/rules.mk | 2 +- keyboards/wilba_tech/wt75_b/rules.mk | 2 +- keyboards/wilba_tech/wt75_c/rules.mk | 2 +- keyboards/wilba_tech/wt80_a/rules.mk | 2 +- keyboards/wilba_tech/wt80_bc/rules.mk | 2 +- keyboards/wilba_tech/wt80_g/rules.mk | 2 +- keyboards/wilba_tech/wt8_a/rules.mk | 2 +- .../wilba_tech/zeal60/keymaps/sethBarberee/rules.mk | 2 +- keyboards/wilba_tech/zeal60/rules.mk | 2 +- keyboards/wilba_tech/zeal65/rules.mk | 2 +- keyboards/wings42/rules.mk | 2 +- keyboards/winkeyless/bmini/rules.mk | 2 +- keyboards/winkeyless/bminiex/rules.mk | 2 +- keyboards/work_louder/loop/rules.mk | 2 +- keyboards/work_louder/nano/rules.mk | 2 +- .../work_louder/work_board/keymaps/drashna/rules.mk | 2 +- keyboards/work_louder/work_board/rules.mk | 2 +- keyboards/wsk/alpha9/rules.mk | 2 +- keyboards/wsk/g4m3ralpha/rules.mk | 2 +- keyboards/wsk/houndstooth/rules.mk | 2 +- keyboards/wsk/kodachi50/rules.mk | 2 +- keyboards/wsk/pain27/rules.mk | 2 +- keyboards/wsk/sl40/rules.mk | 2 +- keyboards/wsk/tkl30/rules.mk | 2 +- keyboards/wuque/ikki68/rules.mk | 2 +- keyboards/wuque/ikki68_aurora/rules.mk | 2 +- keyboards/wuque/mammoth20x/rules.mk | 2 +- keyboards/wuque/serneity65/rules.mk | 2 +- keyboards/x16/rules.mk | 2 +- keyboards/xbows/knight/rules.mk | 2 +- keyboards/xbows/knight_plus/rules.mk | 2 +- keyboards/xbows/nature/rules.mk | 2 +- keyboards/xbows/numpad/rules.mk | 2 +- keyboards/xbows/ranger/rules.mk | 2 +- keyboards/xbows/woody/rules.mk | 2 +- keyboards/xelus/akis/rules.mk | 2 +- keyboards/xelus/dawn60/rev1/rules.mk | 2 +- keyboards/xelus/dawn60/rev1_qmk/rules.mk | 2 +- keyboards/xelus/dharma/rules.mk | 2 +- keyboards/xelus/kangaroo/rules.mk | 2 +- keyboards/xelus/ninjin/rules.mk | 2 +- keyboards/xelus/pachi/mini_32u4/rules.mk | 2 +- keyboards/xelus/pachi/rev1/rules.mk | 2 +- keyboards/xelus/pachi/rgb/rules.mk | 2 +- keyboards/xelus/rs60/rules.mk | 2 +- keyboards/xelus/snap96/rules.mk | 2 +- keyboards/xelus/trinityxttkl/rules.mk | 2 +- keyboards/xelus/valor/rev1/rules.mk | 2 +- keyboards/xelus/valor/rev2/rules.mk | 2 +- keyboards/xelus/valor_frl_tkl/rules.mk | 2 +- keyboards/xiudi/xd004/v1/rules.mk | 2 +- keyboards/xiudi/xd60/rev2/rules.mk | 2 +- keyboards/xiudi/xd60/rev3/rules.mk | 2 +- keyboards/xiudi/xd68/rules.mk | 2 +- keyboards/xiudi/xd75/keymaps/4sstylz/rules.mk | 2 +- keyboards/xiudi/xd75/keymaps/buzzlighter1/rules.mk | 2 +- keyboards/xiudi/xd75/keymaps/fabian/rules.mk | 2 +- keyboards/xiudi/xd75/keymaps/revok75/rules.mk | 2 +- keyboards/xiudi/xd75/rules.mk | 2 +- keyboards/xiudi/xd84/rules.mk | 2 +- keyboards/xiudi/xd84pro/rules.mk | 2 +- keyboards/xiudi/xd87/keymaps/default_underglow/rules.mk | 2 +- keyboards/xiudi/xd87/keymaps/mac_underglow/rules.mk | 2 +- keyboards/xiudi/xd87/rules.mk | 2 +- keyboards/xiudi/xd96/rules.mk | 2 +- keyboards/xw60/rules.mk | 2 +- keyboards/yasui/rules.mk | 2 +- keyboards/yatara/drink_me/rules.mk | 2 +- keyboards/yd60mq/rules.mk | 2 +- keyboards/ymd75/rev1/rules.mk | 2 +- keyboards/ymd75/rev2/rules.mk | 2 +- keyboards/ymd75/rev3/rules.mk | 2 +- keyboards/ymdk/np24/u4rgb6/rules.mk | 2 +- keyboards/ymdk/sp64/rules.mk | 2 +- keyboards/ymdk/wings/rules.mk | 2 +- keyboards/ymdk/wingshs/rules.mk | 2 +- keyboards/ymdk/ym68/rules.mk | 2 +- keyboards/ymdk/ymd09/rules.mk | 2 +- keyboards/ymdk/ymd40/v2/rules.mk | 2 +- keyboards/ymdk/ymd67/rules.mk | 2 +- keyboards/ymdk_np21/rules.mk | 2 +- keyboards/yncognito/batpad/rules.mk | 2 +- keyboards/yoichiro/lunakey_macro/rules.mk | 2 +- keyboards/yoichiro/lunakey_mini/rules.mk | 2 +- keyboards/yugo_m/model_m_101/rules.mk | 2 +- keyboards/yushakobo/quick7/rules.mk | 2 +- keyboards/yynmt/acperience12/rules.mk | 2 +- keyboards/z12/rules.mk | 2 +- keyboards/z150_bh/rules.mk | 2 +- keyboards/z34/rules.mk | 2 +- keyboards/zj68/rules.mk | 2 +- keyboards/zlant/rules.mk | 2 +- keyboards/zoo/wampus/rules.mk | 2 +- keyboards/ztboards/after/rules.mk | 2 +- keyboards/ztboards/noon/rules.mk | 2 +- keyboards/zvecr/split_blackpill/rules.mk | 2 +- keyboards/zvecr/zv48/rules.mk | 2 +- layouts/community/ergodox/drashna/rules.mk | 2 +- layouts/community/ergodox/jjerrell/rules.mk | 2 +- layouts/community/numpad_5x6/bjohnson/rules.mk | 2 +- layouts/community/numpad_5x6/drashna/rules.mk | 2 +- layouts/community/ortho_4x12/brandonschlack/rules.mk | 2 +- layouts/community/ortho_4x12/drashna/rules.mk | 2 +- layouts/community/ortho_4x12/jjerrell/rules.mk | 2 +- layouts/community/ortho_5x12/brandonschlack/rules.mk | 2 +- layouts/community/split_3x6_3/drashna/rules.mk | 2 +- lib/python/qmk/cli/generate/rules_mk.py | 9 +++------ users/bcat/rules.mk | 2 +- users/nstickney/rules.mk | 2 +- users/ridingqwerty/rules.mk | 2 +- users/spidey3/rules.mk | 2 +- users/talljoe/rules.mk | 2 +- users/tominabox1/rules.mk | 2 +- users/yanfali/rules.mk | 2 +- 1286 files changed, 1284 insertions(+), 1308 deletions(-) diff --git a/common_features.mk b/common_features.mk index b605dfbe5e..7abdce302c 100644 --- a/common_features.mk +++ b/common_features.mk @@ -421,12 +421,12 @@ endif ifeq ($(strip $(VIA_ENABLE)), yes) DYNAMIC_KEYMAP_ENABLE := yes RAW_ENABLE := yes - BOOTMAGIC_ENABLE := lite + BOOTMAGIC_ENABLE := yes SRC += $(QUANTUM_DIR)/via.c OPT_DEFS += -DVIA_ENABLE endif -VALID_MAGIC_TYPES := yes lite +VALID_MAGIC_TYPES := yes BOOTMAGIC_ENABLE ?= no ifneq ($(strip $(BOOTMAGIC_ENABLE)), no) ifeq ($(filter $(BOOTMAGIC_ENABLE),$(VALID_MAGIC_TYPES)),) diff --git a/docs/config_options.md b/docs/config_options.md index c4e5afb56b..ece7ab8ee3 100644 --- a/docs/config_options.md +++ b/docs/config_options.md @@ -407,7 +407,7 @@ Use these to enable or disable building certain features. The more you have enab * `MAGIC_ENABLE` * MAGIC actions (BOOTMAGIC without the boot) * `BOOTMAGIC_ENABLE` - * Virtual DIP switch configuration + * Enable Bootmagic Lite * `MOUSEKEY_ENABLE` * Mouse keys * `EXTRAKEY_ENABLE` diff --git a/docs/faq_misc.md b/docs/faq_misc.md index 41d17906bf..9e34a04815 100644 --- a/docs/faq_misc.md +++ b/docs/faq_misc.md @@ -49,10 +49,6 @@ First you have to compile firmware with the build option `NKRO_ENABLE` in **Make Try `Magic` **N** command(`LShift+RShift+N` by default) when **NKRO** still doesn't work. You can use this command to toggle between **NKRO** and **6KRO** mode temporarily. In some situations **NKRO** doesn't work and you will need to switch to **6KRO** mode, in particular when you are in BIOS. -If your firmware was built with `BOOTMAGIC_ENABLE` you need to turn its switch on by `BootMagic` **N** command(`Space+N` by default). This setting is stored in EEPROM and kept over power cycles. - -https://github.com/tmk/tmk_keyboard#boot-magic-configuration---virtual-dip-switch - ## TrackPoint Needs Reset Circuit (PS/2 Mouse Support) Without reset circuit you will have inconsistent result due to improper initialization of the hardware. See circuit schematic of TPM754: diff --git a/docs/feature_bootmagic.md b/docs/feature_bootmagic.md index 6c66b00679..148ea92b9e 100644 --- a/docs/feature_bootmagic.md +++ b/docs/feature_bootmagic.md @@ -8,8 +8,6 @@ On some keyboards Bootmagic Lite is disabled by default. If this is the case, it BOOTMAGIC_ENABLE = yes ``` -?> You may see `lite` being used in place of `yes`. - Additionally, you may want to specify which key to use. This is especially useful for keyboards that have unusual matrices. To do so, you need to specify the row and column of the key that you want to use. Add these entries to your `config.h` file: ```c diff --git a/docs/feature_velocikey.md b/docs/feature_velocikey.md index 93dd7de940..14d4be314d 100644 --- a/docs/feature_velocikey.md +++ b/docs/feature_velocikey.md @@ -6,7 +6,6 @@ Velocikey is a feature that lets you control the speed of lighting effects (like For Velocikey to take effect, there are two steps. First, when compiling your keyboard, you'll need to set `VELOCIKEY_ENABLE=yes` in `rules.mk`, e.g.: ``` -BOOTMAGIC_ENABLE = no MOUSEKEY_ENABLE = no STENO_ENABLE = no EXTRAKEY_ENABLE = yes diff --git a/docs/fr-fr/faq_debug.md b/docs/fr-fr/faq_debug.md index 3b13b96b55..8868744f73 100644 --- a/docs/fr-fr/faq_debug.md +++ b/docs/fr-fr/faq_debug.md @@ -85,10 +85,6 @@ Premièrement, vous devez compiler le firmware avec l'option de compilation `NKR Essayez la commande `Magic` **N** (`LShift+RShift+N` par défaut) si **NKRO** ne fonctionne toujours pas. Vous pouvez utiliser cette commande pour basculer temporairement entre le mode **NKRO** et **6KRO**. Sous certaines conditions, **NKRO** ne fonctionnera pas et vous devrez basculer en **6KRO**, en particulier lorsque vous êtes dans le BIOS. -Si votre firmware est compilé avec `BOOTMAGIC_ENABLE` vous devrez l'activer avec la commande `BootMagic` **N** (`Espace+N` par défaut). Cette option est enregistrée dans l'EEPROM et sera gardé entre deux cycles de démarrage. - -https://github.com/tmk/tmk_keyboard#boot-magic-configuration---virtual-dip-switch - ## Le TrackPoint a besoin Circuit de réinitialisation (Support de souris PS/2) Sans circuit de réinitialisation vous allez avoir des résultats inconsistants à cause de la mauvaise initialisation du matériel. Regardez le schéma du circuit du TPM754. diff --git a/docs/getting_started_make_guide.md b/docs/getting_started_make_guide.md index deef7520e5..a514864353 100644 --- a/docs/getting_started_make_guide.md +++ b/docs/getting_started_make_guide.md @@ -55,7 +55,7 @@ Set these variables to `no` to disable them, and `yes` to enable them. `BOOTMAGIC_ENABLE` -This allows you to hold a key and the salt key (space by default) and have access to a various EEPROM settings that persist over power loss. It's advised you keep this disabled, as the settings are often changed by accident, and produce confusing results that makes it difficult to debug. It's one of the more common problems encountered in help sessions. +This allows you to hold a key (usually Escape by default) to reset the EEPROM settings that persist over power loss and ready your keyboard to accept new firmware. `MOUSEKEY_ENABLE` diff --git a/docs/ja/config_options.md b/docs/ja/config_options.md index 18fe9489b9..fb43d015f2 100644 --- a/docs/ja/config_options.md +++ b/docs/ja/config_options.md @@ -358,7 +358,7 @@ QMK での全ての利用可能な設定にはデフォルトがあります。 これらを使って特定の機能のビルドを有効または無効にします。有効にすればするほどファームウェアが大きくなり、MCU には大きすぎるファームウェアを構築するリスクがあります。 * `BOOTMAGIC_ENABLE` - * 仮想 DIP スイッチ設定 + * ブートマジックライトを有効にします * `MOUSEKEY_ENABLE` * マウスキー * `EXTRAKEY_ENABLE` diff --git a/docs/ja/faq_misc.md b/docs/ja/faq_misc.md index e9a35ef329..38917df2ee 100644 --- a/docs/ja/faq_misc.md +++ b/docs/ja/faq_misc.md @@ -39,10 +39,6 @@ Size after: **NKRO** がまだ動作しない場合は、`Magic` **N** コマンド(デフォルトでは `LShift+RShift+N`)を試してみてください。**NKRO** モードと **6KRO** モード間を一時的に切り替えるためにこのコマンドを使うことができます。**NKRO** が機能しない状況、特に BIOS の場合は **6KRO** モードに切り替える必要があります。 -ファームウェアを `BOOTMAGIC_ENABLE` でビルドした場合、`ブートマジック` **N** コマンドで切り替える必要があります(デフォルトでは `Space+N`)。この設定は EEPROM に格納され、電源を入れ直しても保持されます。 - -https://github.com/tmk/tmk_keyboard#boot-magic-configuration---virtual-dip-switch - ## トラックポイントははリセット回路が必要です (PS/2 マウスサポート) リセット回路が無いとハードウェアの不適切な初期化のために一貫性の無い結果になります。TPM754 の回路図を見てください: diff --git a/docs/ja/feature_velocikey.md b/docs/ja/feature_velocikey.md index f9b6e73bd4..b13969a195 100644 --- a/docs/ja/feature_velocikey.md +++ b/docs/ja/feature_velocikey.md @@ -11,7 +11,6 @@ Velocikey は入力の速度を使って(レインボー渦巻効果のような Velocikey を使うためには、2つのステップがあります。最初に、キーボードをコンパイルする時に、`rules.mk` に `VELOCIKEY_ENABLE=yes` を設定する必要があります。例えば: ``` -BOOTMAGIC_ENABLE = no MOUSEKEY_ENABLE = no STENO_ENABLE = no EXTRAKEY_ENABLE = yes diff --git a/docs/zh-cn/faq_debug.md b/docs/zh-cn/faq_debug.md index 3b6a369003..4dba44c275 100644 --- a/docs/zh-cn/faq_debug.md +++ b/docs/zh-cn/faq_debug.md @@ -81,11 +81,6 @@ Size after: 全键无冲还不好用的话试着用`Magic` **N** 命令(默认是`LShift+RShift+N`)。这个命令会在**全键无冲**和**六键无冲**之间临时切换。有些情况**全键无冲**不好用你就需要使用**六键无冲**模式，尤其是在BIOS中。 -如果你的固件使用`BOOTMAGIC_ENABLE`编译的你要用`BootMagic` **N** 命令(默认`Space+N`)打开开关。这个设置保存在EEPROM中并保存在电源循环中。 - - -https://github.com/tmk/tmk_keyboard#boot-magic-configuration---virtual-dip-switch - ## 指点杆需要复位电路(PS/2 鼠标支持) 如果没有复位电路，由于硬件初始化不正确，您将得到不一致的结果。查看TPM754复位电路。 diff --git a/keyboards/0xcb/1337/rules.mk b/keyboards/0xcb/1337/rules.mk index ec5e339560..76a0c6d599 100644 --- a/keyboards/0xcb/1337/rules.mk +++ b/keyboards/0xcb/1337/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = qmk-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/0xcb/static/rules.mk b/keyboards/0xcb/static/rules.mk index 3738d80295..c32b3252c9 100644 --- a/keyboards/0xcb/static/rules.mk +++ b/keyboards/0xcb/static/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = usbasploader # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/10bleoledhub/rules.mk b/keyboards/10bleoledhub/rules.mk index 700f7e8f77..5f2e79f5a3 100644 --- a/keyboards/10bleoledhub/rules.mk +++ b/keyboards/10bleoledhub/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/1upkeyboards/1up60hse/rules.mk b/keyboards/1upkeyboards/1up60hse/rules.mk index 259fea0256..0f8c15bc02 100644 --- a/keyboards/1upkeyboards/1up60hse/rules.mk +++ b/keyboards/1upkeyboards/1up60hse/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/1upkeyboards/1up60hte/rules.mk b/keyboards/1upkeyboards/1up60hte/rules.mk index 5c2a8b20c5..ccd93ce6d4 100644 --- a/keyboards/1upkeyboards/1up60hte/rules.mk +++ b/keyboards/1upkeyboards/1up60hte/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/1upkeyboards/1up60rgb/rules.mk b/keyboards/1upkeyboards/1up60rgb/rules.mk index 7949142a1d..609f8ee162 100644 --- a/keyboards/1upkeyboards/1up60rgb/rules.mk +++ b/keyboards/1upkeyboards/1up60rgb/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/1upkeyboards/super16/rules.mk b/keyboards/1upkeyboards/super16/rules.mk index d19e1ac8f4..f461427842 100644 --- a/keyboards/1upkeyboards/super16/rules.mk +++ b/keyboards/1upkeyboards/super16/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/2key2crawl/rules.mk b/keyboards/2key2crawl/rules.mk index 19a463a5af..fa92216a38 100644 --- a/keyboards/2key2crawl/rules.mk +++ b/keyboards/2key2crawl/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = no # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/3keyecosystem/2key2/rules.mk b/keyboards/3keyecosystem/2key2/rules.mk index 872ace3b35..0b933eb262 100644 --- a/keyboards/3keyecosystem/2key2/rules.mk +++ b/keyboards/3keyecosystem/2key2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/3w6/rev1/rules.mk b/keyboards/3w6/rev1/rules.mk index 6cc80999c1..e44b34cb92 100644 --- a/keyboards/3w6/rev1/rules.mk +++ b/keyboards/3w6/rev1/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/3w6/rev2/rules.mk b/keyboards/3w6/rev2/rules.mk index 6cc80999c1..e44b34cb92 100644 --- a/keyboards/3w6/rev2/rules.mk +++ b/keyboards/3w6/rev2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/40percentclub/25/rules.mk b/keyboards/40percentclub/25/rules.mk index ff835097a1..48e3d766c4 100644 --- a/keyboards/40percentclub/25/rules.mk +++ b/keyboards/40percentclub/25/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/40percentclub/6lit/rules.mk b/keyboards/40percentclub/6lit/rules.mk index 9546290538..a15b02004f 100644 --- a/keyboards/40percentclub/6lit/rules.mk +++ b/keyboards/40percentclub/6lit/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/40percentclub/foobar/rules.mk b/keyboards/40percentclub/foobar/rules.mk index c21b5c0bbd..2b23dc2ec3 100644 --- a/keyboards/40percentclub/foobar/rules.mk +++ b/keyboards/40percentclub/foobar/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/40percentclub/gherkin/keymaps/stevexyz/rules.mk b/keyboards/40percentclub/gherkin/keymaps/stevexyz/rules.mk index 3b0966b94a..b693b8e305 100644 --- a/keyboards/40percentclub/gherkin/keymaps/stevexyz/rules.mk +++ b/keyboards/40percentclub/gherkin/keymaps/stevexyz/rules.mk @@ -1,6 +1,6 @@ # Build Options (yes/no) # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/40percentclub/gherkin/rules.mk b/keyboards/40percentclub/gherkin/rules.mk index 5db3f2eedb..cb5b8b96f9 100644 --- a/keyboards/40percentclub/gherkin/rules.mk +++ b/keyboards/40percentclub/gherkin/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/40percentclub/i75/rules.mk b/keyboards/40percentclub/i75/rules.mk index 719351cec6..1d0cfaf6df 100644 --- a/keyboards/40percentclub/i75/rules.mk +++ b/keyboards/40percentclub/i75/rules.mk @@ -1,7 +1,7 @@ # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/40percentclub/luddite/rules.mk b/keyboards/40percentclub/luddite/rules.mk index e623904b20..2ccac34f7a 100644 --- a/keyboards/40percentclub/luddite/rules.mk +++ b/keyboards/40percentclub/luddite/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/40percentclub/mf68/keymaps/andyjack/rules.mk b/keyboards/40percentclub/mf68/keymaps/andyjack/rules.mk index 1a247b0543..a124bde758 100644 --- a/keyboards/40percentclub/mf68/keymaps/andyjack/rules.mk +++ b/keyboards/40percentclub/mf68/keymaps/andyjack/rules.mk @@ -1,2 +1,2 @@ MOUSEKEY_ENABLE = yes -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite diff --git a/keyboards/40percentclub/mf68/rules.mk b/keyboards/40percentclub/mf68/rules.mk index 5069e083b5..31bab31987 100644 --- a/keyboards/40percentclub/mf68/rules.mk +++ b/keyboards/40percentclub/mf68/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/40percentclub/nein/rules.mk b/keyboards/40percentclub/nein/rules.mk index 4411195da2..9578124554 100644 --- a/keyboards/40percentclub/nein/rules.mk +++ b/keyboards/40percentclub/nein/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/40percentclub/nori/rules.mk b/keyboards/40percentclub/nori/rules.mk index 181823d0a8..1e76a7eed3 100644 --- a/keyboards/40percentclub/nori/rules.mk +++ b/keyboards/40percentclub/nori/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/40percentclub/sixpack/rules.mk b/keyboards/40percentclub/sixpack/rules.mk index 16878cce86..b701535fa7 100644 --- a/keyboards/40percentclub/sixpack/rules.mk +++ b/keyboards/40percentclub/sixpack/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/40percentclub/tomato/rules.mk b/keyboards/40percentclub/tomato/rules.mk index 4cd1fd625b..a8461a35f7 100644 --- a/keyboards/40percentclub/tomato/rules.mk +++ b/keyboards/40percentclub/tomato/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/40percentclub/ut47/rules.mk b/keyboards/40percentclub/ut47/rules.mk index f0c4e8e3a9..dd4860b610 100644 --- a/keyboards/40percentclub/ut47/rules.mk +++ b/keyboards/40percentclub/ut47/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/45_ats/rules.mk b/keyboards/45_ats/rules.mk index 077733ea87..bcf7f652ec 100644 --- a/keyboards/45_ats/rules.mk +++ b/keyboards/45_ats/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/4pplet/aekiso60/rev_a/rules.mk b/keyboards/4pplet/aekiso60/rev_a/rules.mk index fadbd21ffc..895a77853d 100644 --- a/keyboards/4pplet/aekiso60/rev_a/rules.mk +++ b/keyboards/4pplet/aekiso60/rev_a/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/4pplet/bootleg/rev_a/rules.mk b/keyboards/4pplet/bootleg/rev_a/rules.mk index 4f707bd365..f155258a95 100644 --- a/keyboards/4pplet/bootleg/rev_a/rules.mk +++ b/keyboards/4pplet/bootleg/rev_a/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/4pplet/eagle_viper_rep/rev_a/rules.mk b/keyboards/4pplet/eagle_viper_rep/rev_a/rules.mk index e80e0296a9..5c6e7c6131 100644 --- a/keyboards/4pplet/eagle_viper_rep/rev_a/rules.mk +++ b/keyboards/4pplet/eagle_viper_rep/rev_a/rules.mk @@ -4,7 +4,7 @@ MCU = STM32F072 # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/4pplet/steezy60/rev_a/rules.mk b/keyboards/4pplet/steezy60/rev_a/rules.mk index fadbd21ffc..895a77853d 100644 --- a/keyboards/4pplet/steezy60/rev_a/rules.mk +++ b/keyboards/4pplet/steezy60/rev_a/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/4pplet/waffling60/rev_a/rules.mk b/keyboards/4pplet/waffling60/rev_a/rules.mk index fadbd21ffc..895a77853d 100644 --- a/keyboards/4pplet/waffling60/rev_a/rules.mk +++ b/keyboards/4pplet/waffling60/rev_a/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/4pplet/waffling60/rev_b/rules.mk b/keyboards/4pplet/waffling60/rev_b/rules.mk index 0017a978fe..4fae5efa1e 100644 --- a/keyboards/4pplet/waffling60/rev_b/rules.mk +++ b/keyboards/4pplet/waffling60/rev_b/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/7splus/rules.mk b/keyboards/7splus/rules.mk index 8c14ac20b9..659bea9fdd 100644 --- a/keyboards/7splus/rules.mk +++ b/keyboards/7splus/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/absinthe/rules.mk b/keyboards/absinthe/rules.mk index b94b6338f0..3b482f12ab 100644 --- a/keyboards/absinthe/rules.mk +++ b/keyboards/absinthe/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/acekeyboard/titan60/rules.mk b/keyboards/acekeyboard/titan60/rules.mk index 5bbc093a88..4a6f5a95fc 100644 --- a/keyboards/acekeyboard/titan60/rules.mk +++ b/keyboards/acekeyboard/titan60/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/acheron/arctic/rules.mk b/keyboards/acheron/arctic/rules.mk index 17aa543022..f68afca696 100644 --- a/keyboards/acheron/arctic/rules.mk +++ b/keyboards/acheron/arctic/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/acheron/austin/keymaps/via/rules.mk b/keyboards/acheron/austin/keymaps/via/rules.mk index 5abd4f5bdf..666e72557b 100644 --- a/keyboards/acheron/austin/keymaps/via/rules.mk +++ b/keyboards/acheron/austin/keymaps/via/rules.mk @@ -1,2 +1,2 @@ VIA_ENABLE = yes -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite diff --git a/keyboards/acheron/austin/rules.mk b/keyboards/acheron/austin/rules.mk index d89d8cae81..c0c730767b 100644 --- a/keyboards/acheron/austin/rules.mk +++ b/keyboards/acheron/austin/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/acheron/elongate/rules.mk b/keyboards/acheron/elongate/rules.mk index ca8c652540..5396152569 100644 --- a/keyboards/acheron/elongate/rules.mk +++ b/keyboards/acheron/elongate/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/acheron/keebspcb/rules.mk b/keyboards/acheron/keebspcb/rules.mk index 562436e64a..ae1f29e35e 100644 --- a/keyboards/acheron/keebspcb/rules.mk +++ b/keyboards/acheron/keebspcb/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/acheron/lasgweloth/rules.mk b/keyboards/acheron/lasgweloth/rules.mk index 1cc42c0ee3..197c40da23 100644 --- a/keyboards/acheron/lasgweloth/rules.mk +++ b/keyboards/acheron/lasgweloth/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/acheron/shark/keymaps/via/rules.mk b/keyboards/acheron/shark/keymaps/via/rules.mk index 5abd4f5bdf..666e72557b 100644 --- a/keyboards/acheron/shark/keymaps/via/rules.mk +++ b/keyboards/acheron/shark/keymaps/via/rules.mk @@ -1,2 +1,2 @@ VIA_ENABLE = yes -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite diff --git a/keyboards/acheron/shark/rules.mk b/keyboards/acheron/shark/rules.mk index 0ab8fd2a91..9e9f539765 100644 --- a/keyboards/acheron/shark/rules.mk +++ b/keyboards/acheron/shark/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/acr60/rules.mk b/keyboards/acr60/rules.mk index 89557e4ea7..d45a04dedf 100644 --- a/keyboards/acr60/rules.mk +++ b/keyboards/acr60/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/aeboards/aegis/rules.mk b/keyboards/aeboards/aegis/rules.mk index 0bedbef453..2eb8c5dbde 100644 --- a/keyboards/aeboards/aegis/rules.mk +++ b/keyboards/aeboards/aegis/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/aeboards/constellation/rev1/rules.mk b/keyboards/aeboards/constellation/rev1/rules.mk index 7e84b22ca4..a4ff057a2e 100755 --- a/keyboards/aeboards/constellation/rev1/rules.mk +++ b/keyboards/aeboards/constellation/rev1/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/aeboards/constellation/rev2/rules.mk b/keyboards/aeboards/constellation/rev2/rules.mk index b0a3617413..5e3bd4ae49 100755 --- a/keyboards/aeboards/constellation/rev2/rules.mk +++ b/keyboards/aeboards/constellation/rev2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/aeboards/ext65/rev1/rules.mk b/keyboards/aeboards/ext65/rev1/rules.mk index 0bedbef453..2eb8c5dbde 100644 --- a/keyboards/aeboards/ext65/rev1/rules.mk +++ b/keyboards/aeboards/ext65/rev1/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/aeboards/ext65/rev2/rules.mk b/keyboards/aeboards/ext65/rev2/rules.mk index 3cc7a65076..2d3aaa1761 100644 --- a/keyboards/aeboards/ext65/rev2/rules.mk +++ b/keyboards/aeboards/ext65/rev2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/afternoonlabs/breeze/rev0/rules.mk b/keyboards/afternoonlabs/breeze/rev0/rules.mk index 20ddd6d07f..d77fba8561 100644 --- a/keyboards/afternoonlabs/breeze/rev0/rules.mk +++ b/keyboards/afternoonlabs/breeze/rev0/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = no # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/afternoonlabs/breeze/rev1/rules.mk b/keyboards/afternoonlabs/breeze/rev1/rules.mk index a5a950c648..19e0f238cd 100644 --- a/keyboards/afternoonlabs/breeze/rev1/rules.mk +++ b/keyboards/afternoonlabs/breeze/rev1/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = caterina # change yes to no to disable # SPLIT_KEYBOARD = yes -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/afternoonlabs/oceanbreeze/rev1/rules.mk b/keyboards/afternoonlabs/oceanbreeze/rev1/rules.mk index 687dde568c..a66da7d65e 100644 --- a/keyboards/afternoonlabs/oceanbreeze/rev1/rules.mk +++ b/keyboards/afternoonlabs/oceanbreeze/rev1/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/afternoonlabs/southern_breeze/rev1/rules.mk b/keyboards/afternoonlabs/southern_breeze/rev1/rules.mk index 20ddd6d07f..d77fba8561 100644 --- a/keyboards/afternoonlabs/southern_breeze/rev1/rules.mk +++ b/keyboards/afternoonlabs/southern_breeze/rev1/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = no # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/afternoonlabs/summer_breeze/rev1/rules.mk b/keyboards/afternoonlabs/summer_breeze/rev1/rules.mk index 20ddd6d07f..d77fba8561 100644 --- a/keyboards/afternoonlabs/summer_breeze/rev1/rules.mk +++ b/keyboards/afternoonlabs/summer_breeze/rev1/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = no # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/ai03/andromeda/rules.mk b/keyboards/ai03/andromeda/rules.mk index 17aa543022..f68afca696 100644 --- a/keyboards/ai03/andromeda/rules.mk +++ b/keyboards/ai03/andromeda/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/ai03/equinox/rev0/rules.mk b/keyboards/ai03/equinox/rev0/rules.mk index be4a048405..7d36ae3c45 100644 --- a/keyboards/ai03/equinox/rev0/rules.mk +++ b/keyboards/ai03/equinox/rev0/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ai03/equinox/rev1/rules.mk b/keyboards/ai03/equinox/rev1/rules.mk index be4a048405..7d36ae3c45 100644 --- a/keyboards/ai03/equinox/rev1/rules.mk +++ b/keyboards/ai03/equinox/rev1/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ai03/orbit_x/rules.mk b/keyboards/ai03/orbit_x/rules.mk index 9a9a9acf5a..269b3cb4f4 100644 --- a/keyboards/ai03/orbit_x/rules.mk +++ b/keyboards/ai03/orbit_x/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/ai03/polaris/rules.mk b/keyboards/ai03/polaris/rules.mk index 2824b33cc2..4fe9f0b6e3 100644 --- a/keyboards/ai03/polaris/rules.mk +++ b/keyboards/ai03/polaris/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ai03/vega/rules.mk b/keyboards/ai03/vega/rules.mk index 17aa543022..f68afca696 100644 --- a/keyboards/ai03/vega/rules.mk +++ b/keyboards/ai03/vega/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/ai03/voyager60_alps/rules.mk b/keyboards/ai03/voyager60_alps/rules.mk index 706a8ae201..cf5d2e685d 100644 --- a/keyboards/ai03/voyager60_alps/rules.mk +++ b/keyboards/ai03/voyager60_alps/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ajisai74/rules.mk b/keyboards/ajisai74/rules.mk index 4d39af4d29..0ce4c12edd 100644 --- a/keyboards/ajisai74/rules.mk +++ b/keyboards/ajisai74/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/akb/eb46/rules.mk b/keyboards/akb/eb46/rules.mk index df18dc487e..5c194d1aeb 100644 --- a/keyboards/akb/eb46/rules.mk +++ b/keyboards/akb/eb46/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/akb/raine/rules.mk b/keyboards/akb/raine/rules.mk index df18dc487e..5c194d1aeb 100644 --- a/keyboards/akb/raine/rules.mk +++ b/keyboards/akb/raine/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/aleblazer/zodiark/rules.mk b/keyboards/aleblazer/zodiark/rules.mk index a332d6440b..b91bc280ec 100644 --- a/keyboards/aleblazer/zodiark/rules.mk +++ b/keyboards/aleblazer/zodiark/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/aleth42/rev1/rules.mk b/keyboards/aleth42/rev1/rules.mk index 134b0490c0..423adb206a 100644 --- a/keyboards/aleth42/rev1/rules.mk +++ b/keyboards/aleth42/rev1/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/alf/x11/rules.mk b/keyboards/alf/x11/rules.mk index b4bdead9bf..b38b4e961a 100644 --- a/keyboards/alf/x11/rules.mk +++ b/keyboards/alf/x11/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/alf/x2/rules.mk b/keyboards/alf/x2/rules.mk index c5e4effbac..5635a02825 100644 --- a/keyboards/alf/x2/rules.mk +++ b/keyboards/alf/x2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/alfredslab/swift65/solder/rules.mk b/keyboards/alfredslab/swift65/solder/rules.mk index 6edc162581..776f7f0f2d 100644 --- a/keyboards/alfredslab/swift65/solder/rules.mk +++ b/keyboards/alfredslab/swift65/solder/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/allison/rules.mk b/keyboards/allison/rules.mk index dc7d341bbb..5f180ae00d 100644 --- a/keyboards/allison/rules.mk +++ b/keyboards/allison/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/allison_numpad/rules.mk b/keyboards/allison_numpad/rules.mk index a45d7a8419..3e72995f71 100644 --- a/keyboards/allison_numpad/rules.mk +++ b/keyboards/allison_numpad/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/alpha/rules.mk b/keyboards/alpha/rules.mk index 965667d9ad..c6fa214089 100755 --- a/keyboards/alpha/rules.mk +++ b/keyboards/alpha/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/alpine65/rules.mk b/keyboards/alpine65/rules.mk index f287f36642..70187a2491 100644 --- a/keyboards/alpine65/rules.mk +++ b/keyboards/alpine65/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/alps64/rules.mk b/keyboards/alps64/rules.mk index 91eb9f2e11..4eee16c408 100644 --- a/keyboards/alps64/rules.mk +++ b/keyboards/alps64/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change to no to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/alu84/rules.mk b/keyboards/alu84/rules.mk index 6fb11c13bb..90e8db917e 100755 --- a/keyboards/alu84/rules.mk +++ b/keyboards/alu84/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/amag23/rules.mk b/keyboards/amag23/rules.mk index 5fab15c391..8f11a2b9f1 100644 --- a/keyboards/amag23/rules.mk +++ b/keyboards/amag23/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = bootloadhid # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/amj40/rules.mk b/keyboards/amj40/rules.mk index 81f481950a..aeff331e7e 100755 --- a/keyboards/amj40/rules.mk +++ b/keyboards/amj40/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/amjkeyboard/amj66/rules.mk b/keyboards/amjkeyboard/amj66/rules.mk index 424b34fa2e..550796f861 100644 --- a/keyboards/amjkeyboard/amj66/rules.mk +++ b/keyboards/amjkeyboard/amj66/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/anomalykb/a65i/rules.mk b/keyboards/anomalykb/a65i/rules.mk index 22247fab3c..22fb8d3fe7 100644 --- a/keyboards/anomalykb/a65i/rules.mk +++ b/keyboards/anomalykb/a65i/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/aos/tkl/rules.mk b/keyboards/aos/tkl/rules.mk index 0b052e3312..98872ee082 100644 --- a/keyboards/aos/tkl/rules.mk +++ b/keyboards/aos/tkl/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/aozora/hotswap/rules.mk b/keyboards/aozora/hotswap/rules.mk index a913ba36ad..59dae222fb 100644 --- a/keyboards/aozora/hotswap/rules.mk +++ b/keyboards/aozora/hotswap/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/ares/rules.mk b/keyboards/ares/rules.mk index d726cc5ec0..bd8029ae8d 100644 --- a/keyboards/ares/rules.mk +++ b/keyboards/ares/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = bootloadhid # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/arisu/rules.mk b/keyboards/arisu/rules.mk index 49ec442115..9c78569f93 100644 --- a/keyboards/arisu/rules.mk +++ b/keyboards/arisu/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/arrayperipherals/1x4p1/rules.mk b/keyboards/arrayperipherals/1x4p1/rules.mk index ddfb1280e2..2c15412036 100644 --- a/keyboards/arrayperipherals/1x4p1/rules.mk +++ b/keyboards/arrayperipherals/1x4p1/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ash1800/rules.mk b/keyboards/ash1800/rules.mk index 058392135a..390fda9c3b 100644 --- a/keyboards/ash1800/rules.mk +++ b/keyboards/ash1800/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/ash_xiix/rules.mk b/keyboards/ash_xiix/rules.mk index 49ec442115..9c78569f93 100644 --- a/keyboards/ash_xiix/rules.mk +++ b/keyboards/ash_xiix/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ashpil/modelm_usbc/rules.mk b/keyboards/ashpil/modelm_usbc/rules.mk index 8b717faa40..f731f5e3e3 100644 --- a/keyboards/ashpil/modelm_usbc/rules.mk +++ b/keyboards/ashpil/modelm_usbc/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/at101_bh/rules.mk b/keyboards/at101_bh/rules.mk index 3d435af453..5517774dcf 100644 --- a/keyboards/at101_bh/rules.mk +++ b/keyboards/at101_bh/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = halfkay # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/atxkb/1894/rules.mk b/keyboards/atxkb/1894/rules.mk index ac64cc93f6..7f128bc58e 100644 --- a/keyboards/atxkb/1894/rules.mk +++ b/keyboards/atxkb/1894/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/aves65/rules.mk b/keyboards/aves65/rules.mk index 579f11a46d..9bbae521a4 100644 --- a/keyboards/aves65/rules.mk +++ b/keyboards/aves65/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = qmk-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/axolstudio/helpo/rules.mk b/keyboards/axolstudio/helpo/rules.mk index dffe35fa38..9354e10b87 100644 --- a/keyboards/axolstudio/helpo/rules.mk +++ b/keyboards/axolstudio/helpo/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = usbasploader # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/axolstudio/yeti/rules.mk b/keyboards/axolstudio/yeti/rules.mk index 9374846d49..9182c69fdd 100644 --- a/keyboards/axolstudio/yeti/rules.mk +++ b/keyboards/axolstudio/yeti/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/bakeneko60/rules.mk b/keyboards/bakeneko60/rules.mk index 1490d263c0..abec374090 100644 --- a/keyboards/bakeneko60/rules.mk +++ b/keyboards/bakeneko60/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/bakeneko65/rev2/rules.mk b/keyboards/bakeneko65/rev2/rules.mk index a3cd44fa42..e881cb0011 100644 --- a/keyboards/bakeneko65/rev2/rules.mk +++ b/keyboards/bakeneko65/rev2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/bakeneko65/rev3/rules.mk b/keyboards/bakeneko65/rev3/rules.mk index c79f74e34b..9906266f48 100644 --- a/keyboards/bakeneko65/rev3/rules.mk +++ b/keyboards/bakeneko65/rev3/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/bantam44/rules.mk b/keyboards/bantam44/rules.mk index e61b995e62..209890d9a2 100644 --- a/keyboards/bantam44/rules.mk +++ b/keyboards/bantam44/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = halfkay # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/barleycorn/rules.mk b/keyboards/barleycorn/rules.mk index 5d335fe9a3..3a6d577687 100644 --- a/keyboards/barleycorn/rules.mk +++ b/keyboards/barleycorn/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = usbasploader # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/barleycorn_smd/rules.mk b/keyboards/barleycorn_smd/rules.mk index 1c8ae60e8f..1cb4022709 100644 --- a/keyboards/barleycorn_smd/rules.mk +++ b/keyboards/barleycorn_smd/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/barracuda/rules.mk b/keyboards/barracuda/rules.mk index 74ae396000..19b49ab12f 100644 --- a/keyboards/barracuda/rules.mk +++ b/keyboards/barracuda/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/basekeys/trifecta/rules.mk b/keyboards/basekeys/trifecta/rules.mk index df62bcfabd..6842277d2d 100644 --- a/keyboards/basekeys/trifecta/rules.mk +++ b/keyboards/basekeys/trifecta/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/basketweave/rules.mk b/keyboards/basketweave/rules.mk index 3781462263..ce023436b4 100644 --- a/keyboards/basketweave/rules.mk +++ b/keyboards/basketweave/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = usbasploader # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/bastardkb/scylla/rules.mk b/keyboards/bastardkb/scylla/rules.mk index 014da5c3aa..5d35ab22ba 100644 --- a/keyboards/bastardkb/scylla/rules.mk +++ b/keyboards/bastardkb/scylla/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/bastardkb/skeletyl/rules.mk b/keyboards/bastardkb/skeletyl/rules.mk index 31aec2232e..f66d8f4494 100644 --- a/keyboards/bastardkb/skeletyl/rules.mk +++ b/keyboards/bastardkb/skeletyl/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/bastardkb/tbk/rules.mk b/keyboards/bastardkb/tbk/rules.mk index 4b9b97c3e3..aeb183666e 100644 --- a/keyboards/bastardkb/tbk/rules.mk +++ b/keyboards/bastardkb/tbk/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/bastardkb/tbkmini/rules.mk b/keyboards/bastardkb/tbkmini/rules.mk index 009cb4bbc1..5ea23a33a5 100644 --- a/keyboards/bastardkb/tbkmini/rules.mk +++ b/keyboards/bastardkb/tbkmini/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/beatervan/rules.mk b/keyboards/beatervan/rules.mk index 5e0249f4d1..f835a7c2d0 100644 --- a/keyboards/beatervan/rules.mk +++ b/keyboards/beatervan/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/bemeier/bmek/rev1/rules.mk b/keyboards/bemeier/bmek/rev1/rules.mk index c2c08206c7..9e6bcd7653 100755 --- a/keyboards/bemeier/bmek/rev1/rules.mk +++ b/keyboards/bemeier/bmek/rev1/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no EXTRAKEY_ENABLE = yes CONSOLE_ENABLE = no diff --git a/keyboards/bemeier/bmek/rev2/rules.mk b/keyboards/bemeier/bmek/rev2/rules.mk index c2c08206c7..9e6bcd7653 100755 --- a/keyboards/bemeier/bmek/rev2/rules.mk +++ b/keyboards/bemeier/bmek/rev2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no EXTRAKEY_ENABLE = yes CONSOLE_ENABLE = no diff --git a/keyboards/bemeier/bmek/rev3/rules.mk b/keyboards/bemeier/bmek/rev3/rules.mk index c2c08206c7..9e6bcd7653 100755 --- a/keyboards/bemeier/bmek/rev3/rules.mk +++ b/keyboards/bemeier/bmek/rev3/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no EXTRAKEY_ENABLE = yes CONSOLE_ENABLE = no diff --git a/keyboards/bfake/rules.mk b/keyboards/bfake/rules.mk index 6f95a118f7..5b70617255 100644 --- a/keyboards/bfake/rules.mk +++ b/keyboards/bfake/rules.mk @@ -5,7 +5,7 @@ MCU = atmega32a BOOTLOADER = bootloadhid # build options -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes EXTRAKEY_ENABLE = yes CONSOLE_ENABLE = no diff --git a/keyboards/binepad/bn003/rules.mk b/keyboards/binepad/bn003/rules.mk index 576d4ef5f2..10e9616d6f 100644 --- a/keyboards/binepad/bn003/rules.mk +++ b/keyboards/binepad/bn003/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/bioi/g60/rules.mk b/keyboards/bioi/g60/rules.mk index 5a524890ef..43a65a3d36 100644 --- a/keyboards/bioi/g60/rules.mk +++ b/keyboards/bioi/g60/rules.mk @@ -18,7 +18,7 @@ OPT_DEFS += -DUSART1_ENABLED # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/bioi/g60ble/rules.mk b/keyboards/bioi/g60ble/rules.mk index 6b17e337a1..58cfbb46ad 100644 --- a/keyboards/bioi/g60ble/rules.mk +++ b/keyboards/bioi/g60ble/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = qmk-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/bioi/morgan65/rules.mk b/keyboards/bioi/morgan65/rules.mk index 5a524890ef..43a65a3d36 100644 --- a/keyboards/bioi/morgan65/rules.mk +++ b/keyboards/bioi/morgan65/rules.mk @@ -18,7 +18,7 @@ OPT_DEFS += -DUSART1_ENABLED # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/bioi/s65/rules.mk b/keyboards/bioi/s65/rules.mk index 0c4c1929fa..9c35a83c20 100644 --- a/keyboards/bioi/s65/rules.mk +++ b/keyboards/bioi/s65/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = qmk-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/blackplum/rules.mk b/keyboards/blackplum/rules.mk index b969665f4e..49822a44ea 100644 --- a/keyboards/blackplum/rules.mk +++ b/keyboards/blackplum/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = qmk-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/boardrun/bizarre/rules.mk b/keyboards/boardrun/bizarre/rules.mk index 8d08446ee2..0acd19e670 100644 --- a/keyboards/boardrun/bizarre/rules.mk +++ b/keyboards/boardrun/bizarre/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/boardrun/classic/rules.mk b/keyboards/boardrun/classic/rules.mk index a3b924ec2e..a488e3dc0b 100644 --- a/keyboards/boardrun/classic/rules.mk +++ b/keyboards/boardrun/classic/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/boardsource/3x4/rules.mk b/keyboards/boardsource/3x4/rules.mk index 85062d0b62..b4c8b293e0 100644 --- a/keyboards/boardsource/3x4/rules.mk +++ b/keyboards/boardsource/3x4/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/boardsource/4x12/rules.mk b/keyboards/boardsource/4x12/rules.mk index b6805a6865..d505368b0b 100644 --- a/keyboards/boardsource/4x12/rules.mk +++ b/keyboards/boardsource/4x12/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/boardsource/5x12/rules.mk b/keyboards/boardsource/5x12/rules.mk index 9e7ed55695..ba1884fa8a 100644 --- a/keyboards/boardsource/5x12/rules.mk +++ b/keyboards/boardsource/5x12/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/boardsource/beiwagon/rules.mk b/keyboards/boardsource/beiwagon/rules.mk index 7c2e7fd5e1..575227a36e 100644 --- a/keyboards/boardsource/beiwagon/rules.mk +++ b/keyboards/boardsource/beiwagon/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = no # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/boardsource/holiday/spooky/rules.mk b/keyboards/boardsource/holiday/spooky/rules.mk index f8504aca7d..509ede75ad 100644 --- a/keyboards/boardsource/holiday/spooky/rules.mk +++ b/keyboards/boardsource/holiday/spooky/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/boardsource/technik_o/rules.mk b/keyboards/boardsource/technik_o/rules.mk index b94ba1785b..ced26ad699 100644 --- a/keyboards/boardsource/technik_o/rules.mk +++ b/keyboards/boardsource/technik_o/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/boardsource/technik_s/rules.mk b/keyboards/boardsource/technik_s/rules.mk index 87612969d0..efc63b4d56 100644 --- a/keyboards/boardsource/technik_s/rules.mk +++ b/keyboards/boardsource/technik_s/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/boardsource/the_mark/rules.mk b/keyboards/boardsource/the_mark/rules.mk index 85b0c328de..e968cf4fa5 100644 --- a/keyboards/boardsource/the_mark/rules.mk +++ b/keyboards/boardsource/the_mark/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/boardwalk/keymaps/niclake/rules.mk b/keyboards/boardwalk/keymaps/niclake/rules.mk index 0b4dadb10e..31d6053e03 100644 --- a/keyboards/boardwalk/keymaps/niclake/rules.mk +++ b/keyboards/boardwalk/keymaps/niclake/rules.mk @@ -1,3 +1,3 @@ COMMAND_ENABLE = no RGBLIGHT_ENABLE = yes -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite diff --git a/keyboards/bobpad/rules.mk b/keyboards/bobpad/rules.mk index 31a2d9df52..d841c10cc1 100644 --- a/keyboards/bobpad/rules.mk +++ b/keyboards/bobpad/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/bop/rules.mk b/keyboards/bop/rules.mk index c4e8c59e42..d3ce654f12 100644 --- a/keyboards/bop/rules.mk +++ b/keyboards/bop/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = halfkay # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/boston/rules.mk b/keyboards/boston/rules.mk index 8792a0276f..4ad4ec58d0 100644 --- a/keyboards/boston/rules.mk +++ b/keyboards/boston/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/botanicalkeyboards/fm2u/rules.mk b/keyboards/botanicalkeyboards/fm2u/rules.mk index 69ca4affef..2f757667b0 100644 --- a/keyboards/botanicalkeyboards/fm2u/rules.mk +++ b/keyboards/botanicalkeyboards/fm2u/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/box75/rules.mk b/keyboards/box75/rules.mk index 755125c797..ee6c0dfca7 100644 --- a/keyboards/box75/rules.mk +++ b/keyboards/box75/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/bpiphany/pegasushoof/keymaps/blowrak/rules.mk b/keyboards/bpiphany/pegasushoof/keymaps/blowrak/rules.mk index 9af05bb3d9..737451b39a 100644 --- a/keyboards/bpiphany/pegasushoof/keymaps/blowrak/rules.mk +++ b/keyboards/bpiphany/pegasushoof/keymaps/blowrak/rules.mk @@ -2,7 +2,7 @@ # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = yes # Console for debug(+400) diff --git a/keyboards/bpiphany/pegasushoof/keymaps/default/rules.mk b/keyboards/bpiphany/pegasushoof/keymaps/default/rules.mk index fa42618f24..c1e6e9ed02 100644 --- a/keyboards/bpiphany/pegasushoof/keymaps/default/rules.mk +++ b/keyboards/bpiphany/pegasushoof/keymaps/default/rules.mk @@ -2,7 +2,7 @@ # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/bpiphany/pegasushoof/keymaps/default_jis/rules.mk b/keyboards/bpiphany/pegasushoof/keymaps/default_jis/rules.mk index 250f7de789..f23c2105a3 100644 --- a/keyboards/bpiphany/pegasushoof/keymaps/default_jis/rules.mk +++ b/keyboards/bpiphany/pegasushoof/keymaps/default_jis/rules.mk @@ -2,7 +2,7 @@ # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = yes # Console for debug(+400) diff --git a/keyboards/bpiphany/pegasushoof/rules.mk b/keyboards/bpiphany/pegasushoof/rules.mk index d4d5fcf460..232de655c7 100644 --- a/keyboards/bpiphany/pegasushoof/rules.mk +++ b/keyboards/bpiphany/pegasushoof/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/bpiphany/unloved_bastard/rules.mk b/keyboards/bpiphany/unloved_bastard/rules.mk index 0661b2e92a..01b4a4a29e 100644 --- a/keyboards/bpiphany/unloved_bastard/rules.mk +++ b/keyboards/bpiphany/unloved_bastard/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/buildakb/potato65/rules.mk b/keyboards/buildakb/potato65/rules.mk index 8e14e68d50..e026d1645f 100644 --- a/keyboards/buildakb/potato65/rules.mk +++ b/keyboards/buildakb/potato65/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/buildakb/potato65hs/rules.mk b/keyboards/buildakb/potato65hs/rules.mk index 5150f2f718..7d7f1ff424 100644 --- a/keyboards/buildakb/potato65hs/rules.mk +++ b/keyboards/buildakb/potato65hs/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/c39/keymaps/drashna/rules.mk b/keyboards/c39/keymaps/drashna/rules.mk index 0e5a4cbebd..a6575bbd93 100644 --- a/keyboards/c39/keymaps/drashna/rules.mk +++ b/keyboards/c39/keymaps/drashna/rules.mk @@ -5,7 +5,7 @@ BOARD = QMK_PROTON_C # Bootloader selection BOOTLOADER = stm32-dfu -BOOTMAGIC_ENABLE = yes +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes EXTRAKEY_ENABLE = yes CONSOLE_ENABLE = yes diff --git a/keyboards/caffeinated/serpent65/rules.mk b/keyboards/caffeinated/serpent65/rules.mk index 1209331901..22f971288e 100644 --- a/keyboards/caffeinated/serpent65/rules.mk +++ b/keyboards/caffeinated/serpent65/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/cannonkeys/aella/rules.mk b/keyboards/cannonkeys/aella/rules.mk index e5bf1ef881..e3c94c282c 100644 --- a/keyboards/cannonkeys/aella/rules.mk +++ b/keyboards/cannonkeys/aella/rules.mk @@ -10,7 +10,7 @@ DFU_SUFFIX_ARGS = -v FFFF -p FFFF # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/cannonkeys/an_c/rules.mk b/keyboards/cannonkeys/an_c/rules.mk index 66e6b65776..1c8a0a4e14 100644 --- a/keyboards/cannonkeys/an_c/rules.mk +++ b/keyboards/cannonkeys/an_c/rules.mk @@ -12,7 +12,7 @@ DFU_SUFFIX_ARGS = -v FFFF -p FFFF # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/cannonkeys/atlas/rules.mk b/keyboards/cannonkeys/atlas/rules.mk index ee32cf30bd..a2519aa035 100644 --- a/keyboards/cannonkeys/atlas/rules.mk +++ b/keyboards/cannonkeys/atlas/rules.mk @@ -6,7 +6,7 @@ BOOTLOADER = stm32-dfu # Build Options # comment out to disable the options. -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/cannonkeys/atlas_alps/rules.mk b/keyboards/cannonkeys/atlas_alps/rules.mk index 375db3aede..f9a0f9be2f 100644 --- a/keyboards/cannonkeys/atlas_alps/rules.mk +++ b/keyboards/cannonkeys/atlas_alps/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/cannonkeys/balance/rules.mk b/keyboards/cannonkeys/balance/rules.mk index 2cd1e23fa9..6f2ef2794e 100644 --- a/keyboards/cannonkeys/balance/rules.mk +++ b/keyboards/cannonkeys/balance/rules.mk @@ -10,7 +10,7 @@ DFU_SUFFIX_ARGS = -p FFFF -v FFFF # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/cannonkeys/chimera65/rules.mk b/keyboards/cannonkeys/chimera65/rules.mk index 9c680a29b0..a1d2c6675f 100644 --- a/keyboards/cannonkeys/chimera65/rules.mk +++ b/keyboards/cannonkeys/chimera65/rules.mk @@ -9,7 +9,7 @@ BOOTLOADER = stm32-dfu # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/cannonkeys/db60/rules.mk b/keyboards/cannonkeys/db60/rules.mk index be4c05831b..43e9d6c998 100644 --- a/keyboards/cannonkeys/db60/rules.mk +++ b/keyboards/cannonkeys/db60/rules.mk @@ -10,7 +10,7 @@ DFU_SUFFIX_ARGS = -v FFFF -p FFFF # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/cannonkeys/devastatingtkl/rules.mk b/keyboards/cannonkeys/devastatingtkl/rules.mk index 1a11e0a892..8c80d472c0 100644 --- a/keyboards/cannonkeys/devastatingtkl/rules.mk +++ b/keyboards/cannonkeys/devastatingtkl/rules.mk @@ -10,7 +10,7 @@ DFU_SUFFIX_ARGS = -v FFFF -p FFFF # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/cannonkeys/instant60/rules.mk b/keyboards/cannonkeys/instant60/rules.mk index e483bb0722..8c2b499dfd 100644 --- a/keyboards/cannonkeys/instant60/rules.mk +++ b/keyboards/cannonkeys/instant60/rules.mk @@ -11,7 +11,7 @@ DFU_SUFFIX_ARGS = -v FFFF -p FFFF # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/cannonkeys/instant65/rules.mk b/keyboards/cannonkeys/instant65/rules.mk index aa0b3116a9..1f61cca45f 100644 --- a/keyboards/cannonkeys/instant65/rules.mk +++ b/keyboards/cannonkeys/instant65/rules.mk @@ -10,7 +10,7 @@ DFU_SUFFIX_ARGS = -v FFFF -p FFFF # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/cannonkeys/iron165/rules.mk b/keyboards/cannonkeys/iron165/rules.mk index 641a6c14da..e159c6ae82 100644 --- a/keyboards/cannonkeys/iron165/rules.mk +++ b/keyboards/cannonkeys/iron165/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/cannonkeys/obliterated75/rules.mk b/keyboards/cannonkeys/obliterated75/rules.mk index 60b6bc58de..0f8ad7cadc 100644 --- a/keyboards/cannonkeys/obliterated75/rules.mk +++ b/keyboards/cannonkeys/obliterated75/rules.mk @@ -10,7 +10,7 @@ DFU_SUFFIX_ARGS = -v FFFF -p FFFF # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/cannonkeys/onyx/rules.mk b/keyboards/cannonkeys/onyx/rules.mk index 26b4fab43e..cfa8daced4 100644 --- a/keyboards/cannonkeys/onyx/rules.mk +++ b/keyboards/cannonkeys/onyx/rules.mk @@ -10,7 +10,7 @@ DFU_SUFFIX_ARGS = -v FFFF -p FFFF # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/cannonkeys/rekt1800/rules.mk b/keyboards/cannonkeys/rekt1800/rules.mk index 962b9dcf40..928e8d5171 100644 --- a/keyboards/cannonkeys/rekt1800/rules.mk +++ b/keyboards/cannonkeys/rekt1800/rules.mk @@ -10,7 +10,7 @@ DFU_SUFFIX_ARGS = -v FFFF -p FFFF # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/cannonkeys/sagittarius/rules.mk b/keyboards/cannonkeys/sagittarius/rules.mk index 4abdb98945..2aed2c9a1a 100644 --- a/keyboards/cannonkeys/sagittarius/rules.mk +++ b/keyboards/cannonkeys/sagittarius/rules.mk @@ -10,7 +10,7 @@ DFU_SUFFIX_ARGS = -v FFFF -p FFFF # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/cannonkeys/satisfaction75/rules.mk b/keyboards/cannonkeys/satisfaction75/rules.mk index 51f1dc52f5..b74a4b35cd 100644 --- a/keyboards/cannonkeys/satisfaction75/rules.mk +++ b/keyboards/cannonkeys/satisfaction75/rules.mk @@ -16,7 +16,7 @@ SRC += led.c \ satisfaction_encoder.c \ satisfaction_oled.c -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/cannonkeys/savage65/rules.mk b/keyboards/cannonkeys/savage65/rules.mk index 92e945d8f5..d5f41eccd0 100644 --- a/keyboards/cannonkeys/savage65/rules.mk +++ b/keyboards/cannonkeys/savage65/rules.mk @@ -12,7 +12,7 @@ DFU_SUFFIX_ARGS = -v FFFF -p FFFF # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/cannonkeys/tmov2/rules.mk b/keyboards/cannonkeys/tmov2/rules.mk index 7464df414b..d068ea28a7 100644 --- a/keyboards/cannonkeys/tmov2/rules.mk +++ b/keyboards/cannonkeys/tmov2/rules.mk @@ -12,7 +12,7 @@ DFU_SUFFIX_ARGS = -v FFFF -p FFFF # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/cannonkeys/tsukuyomi/rules.mk b/keyboards/cannonkeys/tsukuyomi/rules.mk index aa0b3116a9..1f61cca45f 100644 --- a/keyboards/cannonkeys/tsukuyomi/rules.mk +++ b/keyboards/cannonkeys/tsukuyomi/rules.mk @@ -10,7 +10,7 @@ DFU_SUFFIX_ARGS = -v FFFF -p FFFF # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/cannonkeys/vicious40/rules.mk b/keyboards/cannonkeys/vicious40/rules.mk index 490af346fc..0b98c9aad8 100644 --- a/keyboards/cannonkeys/vicious40/rules.mk +++ b/keyboards/cannonkeys/vicious40/rules.mk @@ -10,7 +10,7 @@ DFU_SUFFIX_ARGS = -p FFFF -v FFFF # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/capsunlocked/cu65/rules.mk b/keyboards/capsunlocked/cu65/rules.mk index d282a8a11f..7a5eae962d 100644 --- a/keyboards/capsunlocked/cu65/rules.mk +++ b/keyboards/capsunlocked/cu65/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/capsunlocked/cu7/rules.mk b/keyboards/capsunlocked/cu7/rules.mk index 1bf9ed4187..599aa6616e 100644 --- a/keyboards/capsunlocked/cu7/rules.mk +++ b/keyboards/capsunlocked/cu7/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/capsunlocked/cu80/v2_ansi/info.json b/keyboards/capsunlocked/cu80/v2_ansi/info.json index 4817f5d885..f0317de36d 100644 --- a/keyboards/capsunlocked/cu80/v2_ansi/info.json +++ b/keyboards/capsunlocked/cu80/v2_ansi/info.json @@ -9,7 +9,7 @@ "audio": false, "backlight": false, "bluetooth": false, - "bootmagic_lite": true, + "bootmagic": true, "command": false, "console": false, "extrakey": true, diff --git a/keyboards/capsunlocked/cu80/v2_iso/info.json b/keyboards/capsunlocked/cu80/v2_iso/info.json index b59f073f82..c332156069 100644 --- a/keyboards/capsunlocked/cu80/v2_iso/info.json +++ b/keyboards/capsunlocked/cu80/v2_iso/info.json @@ -9,7 +9,7 @@ "audio": false, "backlight": false, "bluetooth": false, - "bootmagic_lite": true, + "bootmagic": true, "command": false, "console": false, "extrakey": true, diff --git a/keyboards/carbo65/rules.mk b/keyboards/carbo65/rules.mk index 73ddf1a595..8d14f05b82 100644 --- a/keyboards/carbo65/rules.mk +++ b/keyboards/carbo65/rules.mk @@ -12,7 +12,7 @@ OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/cest73/tkm/rules.mk b/keyboards/cest73/tkm/rules.mk index ef21793323..b1a5ec8ed1 100644 --- a/keyboards/cest73/tkm/rules.mk +++ b/keyboards/cest73/tkm/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = halfkay # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/charue/sunsetter/rules.mk b/keyboards/charue/sunsetter/rules.mk index 17aa543022..f68afca696 100644 --- a/keyboards/charue/sunsetter/rules.mk +++ b/keyboards/charue/sunsetter/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/chavdai40/rev1/rules.mk b/keyboards/chavdai40/rev1/rules.mk index 3c8cf0b1ee..8ac58cee44 100644 --- a/keyboards/chavdai40/rev1/rules.mk +++ b/keyboards/chavdai40/rev1/rules.mk @@ -6,7 +6,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/chavdai40/rev2/rules.mk b/keyboards/chavdai40/rev2/rules.mk index 3c8cf0b1ee..8ac58cee44 100644 --- a/keyboards/chavdai40/rev2/rules.mk +++ b/keyboards/chavdai40/rev2/rules.mk @@ -6,7 +6,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/checkerboards/axon40/rules.mk b/keyboards/checkerboards/axon40/rules.mk index 706a8ae201..cf5d2e685d 100644 --- a/keyboards/checkerboards/axon40/rules.mk +++ b/keyboards/checkerboards/axon40/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/checkerboards/candybar_ortho/rules.mk b/keyboards/checkerboards/candybar_ortho/rules.mk index c7325af4a4..9c1d6cae25 100644 --- a/keyboards/checkerboards/candybar_ortho/rules.mk +++ b/keyboards/checkerboards/candybar_ortho/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/checkerboards/g_idb60/rules.mk b/keyboards/checkerboards/g_idb60/rules.mk index c79f74e34b..9906266f48 100644 --- a/keyboards/checkerboards/g_idb60/rules.mk +++ b/keyboards/checkerboards/g_idb60/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/checkerboards/nop60/rules.mk b/keyboards/checkerboards/nop60/rules.mk index 032c08957e..855a9a3cef 100644 --- a/keyboards/checkerboards/nop60/rules.mk +++ b/keyboards/checkerboards/nop60/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/checkerboards/quark_squared/rules.mk b/keyboards/checkerboards/quark_squared/rules.mk index c8a103221d..5f39f8194b 100644 --- a/keyboards/checkerboards/quark_squared/rules.mk +++ b/keyboards/checkerboards/quark_squared/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/checkerboards/ud40_ortho_alt/rules.mk b/keyboards/checkerboards/ud40_ortho_alt/rules.mk index 598ef9619f..5d4aeea5d2 100644 --- a/keyboards/checkerboards/ud40_ortho_alt/rules.mk +++ b/keyboards/checkerboards/ud40_ortho_alt/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/cherrybstudio/cb1800/rules.mk b/keyboards/cherrybstudio/cb1800/rules.mk index f3d44f97c8..57afa20fbf 100644 --- a/keyboards/cherrybstudio/cb1800/rules.mk +++ b/keyboards/cherrybstudio/cb1800/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/cherrybstudio/cb87/rules.mk b/keyboards/cherrybstudio/cb87/rules.mk index 895ff3d4dd..95ce654774 100644 --- a/keyboards/cherrybstudio/cb87/rules.mk +++ b/keyboards/cherrybstudio/cb87/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/cheshire/curiosity/rules.mk b/keyboards/cheshire/curiosity/rules.mk index 6de036f0d3..21c5711482 100644 --- a/keyboards/cheshire/curiosity/rules.mk +++ b/keyboards/cheshire/curiosity/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/chili/rules.mk b/keyboards/chili/rules.mk index 336ba86fbb..8d43b3c377 100644 --- a/keyboards/chili/rules.mk +++ b/keyboards/chili/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/chlx/merro60/rules.mk b/keyboards/chlx/merro60/rules.mk index bbf3580c01..511f2ca9de 100644 --- a/keyboards/chlx/merro60/rules.mk +++ b/keyboards/chlx/merro60/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/choc_taro/rules.mk b/keyboards/choc_taro/rules.mk index b00cd2f470..3cd8a67a45 100644 --- a/keyboards/choc_taro/rules.mk +++ b/keyboards/choc_taro/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/choco60/rev2/rules.mk b/keyboards/choco60/rev2/rules.mk index ee45ed03f7..85680a44d1 100644 --- a/keyboards/choco60/rev2/rules.mk +++ b/keyboards/choco60/rev2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ck60i/rules.mk b/keyboards/ck60i/rules.mk index 18b4e737ff..baf54d1e2e 100644 --- a/keyboards/ck60i/rules.mk +++ b/keyboards/ck60i/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ckeys/thedora/rules.mk b/keyboards/ckeys/thedora/rules.mk index 3aabafc953..2b322b2ab1 100755 --- a/keyboards/ckeys/thedora/rules.mk +++ b/keyboards/ckeys/thedora/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/clawsome/bookerboard/rules.mk b/keyboards/clawsome/bookerboard/rules.mk index d67d33602d..dbf0923070 100644 --- a/keyboards/clawsome/bookerboard/rules.mk +++ b/keyboards/clawsome/bookerboard/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/clawsome/coupe/rules.mk b/keyboards/clawsome/coupe/rules.mk index 933784e9c0..13ab508782 100644 --- a/keyboards/clawsome/coupe/rules.mk +++ b/keyboards/clawsome/coupe/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/clawsome/doodle/rules.mk b/keyboards/clawsome/doodle/rules.mk index 2bab916175..a7f737a086 100644 --- a/keyboards/clawsome/doodle/rules.mk +++ b/keyboards/clawsome/doodle/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/clawsome/fightpad/rules.mk b/keyboards/clawsome/fightpad/rules.mk index 1f14fe5196..c1149216c2 100644 --- a/keyboards/clawsome/fightpad/rules.mk +++ b/keyboards/clawsome/fightpad/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/clawsome/gamebuddy/v1_0/rules.mk b/keyboards/clawsome/gamebuddy/v1_0/rules.mk index 723de16c21..6b6d548822 100644 --- a/keyboards/clawsome/gamebuddy/v1_0/rules.mk +++ b/keyboards/clawsome/gamebuddy/v1_0/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/clawsome/gamebuddy/v1_m/rules.mk b/keyboards/clawsome/gamebuddy/v1_m/rules.mk index 2bab916175..a7f737a086 100644 --- a/keyboards/clawsome/gamebuddy/v1_m/rules.mk +++ b/keyboards/clawsome/gamebuddy/v1_m/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/clawsome/hatchback/rules.mk b/keyboards/clawsome/hatchback/rules.mk index bd712c0982..74a7851e6c 100644 --- a/keyboards/clawsome/hatchback/rules.mk +++ b/keyboards/clawsome/hatchback/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/clawsome/luggage_rack/rules.mk b/keyboards/clawsome/luggage_rack/rules.mk index bd712c0982..74a7851e6c 100644 --- a/keyboards/clawsome/luggage_rack/rules.mk +++ b/keyboards/clawsome/luggage_rack/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/clawsome/numeros/rules.mk b/keyboards/clawsome/numeros/rules.mk index effbf1bbaa..6550b56feb 100644 --- a/keyboards/clawsome/numeros/rules.mk +++ b/keyboards/clawsome/numeros/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/clawsome/roadster/rules.mk b/keyboards/clawsome/roadster/rules.mk index bd712c0982..74a7851e6c 100644 --- a/keyboards/clawsome/roadster/rules.mk +++ b/keyboards/clawsome/roadster/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/clawsome/sedan/rules.mk b/keyboards/clawsome/sedan/rules.mk index 02b80f6fd2..732c4b6478 100644 --- a/keyboards/clawsome/sedan/rules.mk +++ b/keyboards/clawsome/sedan/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/clawsome/sidekick/rules.mk b/keyboards/clawsome/sidekick/rules.mk index d67d33602d..dbf0923070 100644 --- a/keyboards/clawsome/sidekick/rules.mk +++ b/keyboards/clawsome/sidekick/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/clawsome/suv/rules.mk b/keyboards/clawsome/suv/rules.mk index 2bab916175..a7f737a086 100644 --- a/keyboards/clawsome/suv/rules.mk +++ b/keyboards/clawsome/suv/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/cmm_studio/saka68/hotswap/rules.mk b/keyboards/cmm_studio/saka68/hotswap/rules.mk index f1b8f4cf8b..c38b5f2d03 100644 --- a/keyboards/cmm_studio/saka68/hotswap/rules.mk +++ b/keyboards/cmm_studio/saka68/hotswap/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/cmm_studio/saka68/solder/rules.mk b/keyboards/cmm_studio/saka68/solder/rules.mk index 077b060eea..9310ae063d 100644 --- a/keyboards/cmm_studio/saka68/solder/rules.mk +++ b/keyboards/cmm_studio/saka68/solder/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/coarse/cordillera/rules.mk b/keyboards/coarse/cordillera/rules.mk index 57f80965eb..d1c149794e 100644 --- a/keyboards/coarse/cordillera/rules.mk +++ b/keyboards/coarse/cordillera/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/coarse/ixora/rules.mk b/keyboards/coarse/ixora/rules.mk index 339fdee920..5026583b06 100644 --- a/keyboards/coarse/ixora/rules.mk +++ b/keyboards/coarse/ixora/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # comment out to disable the options. # BACKLIGHT_ENABLE = no -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/coarse/vinta/rules.mk b/keyboards/coarse/vinta/rules.mk index e887eb0981..fd336cf021 100644 --- a/keyboards/coarse/vinta/rules.mk +++ b/keyboards/coarse/vinta/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # comment out to disable the options. # BACKLIGHT_ENABLE = no -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/compound/rules.mk b/keyboards/compound/rules.mk index f2e5379ac1..3105d59b77 100644 --- a/keyboards/compound/rules.mk +++ b/keyboards/compound/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/contra/rules.mk b/keyboards/contra/rules.mk index 91d887f15b..72b4d86e97 100755 --- a/keyboards/contra/rules.mk +++ b/keyboards/contra/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/converter/a1200/miss1200/rules.mk b/keyboards/converter/a1200/miss1200/rules.mk index cf8291d064..4ccdf5bb3e 100644 --- a/keyboards/converter/a1200/miss1200/rules.mk +++ b/keyboards/converter/a1200/miss1200/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/converter/a1200/teensy2pp/rules.mk b/keyboards/converter/a1200/teensy2pp/rules.mk index 29624324e8..5f74692015 100644 --- a/keyboards/converter/a1200/teensy2pp/rules.mk +++ b/keyboards/converter/a1200/teensy2pp/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = halfkay # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/converter/modelm_ssk/rules.mk b/keyboards/converter/modelm_ssk/rules.mk index 4b05b0ae0c..eab17f7d95 100644 --- a/keyboards/converter/modelm_ssk/rules.mk +++ b/keyboards/converter/modelm_ssk/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = halfkay # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/cool836a/rules.mk b/keyboards/cool836a/rules.mk index c79f74e34b..9906266f48 100644 --- a/keyboards/cool836a/rules.mk +++ b/keyboards/cool836a/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/coseyfannitutti/discipad/rules.mk b/keyboards/coseyfannitutti/discipad/rules.mk index fadfff9d88..e2da88fcad 100644 --- a/keyboards/coseyfannitutti/discipad/rules.mk +++ b/keyboards/coseyfannitutti/discipad/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = usbasploader # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/coseyfannitutti/discipline/rules.mk b/keyboards/coseyfannitutti/discipline/rules.mk index 9099b68d08..50a627d3d8 100644 --- a/keyboards/coseyfannitutti/discipline/rules.mk +++ b/keyboards/coseyfannitutti/discipline/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = usbasploader # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/coseyfannitutti/mullet/rules.mk b/keyboards/coseyfannitutti/mullet/rules.mk index 299768093d..e5c4883fa5 100644 --- a/keyboards/coseyfannitutti/mullet/rules.mk +++ b/keyboards/coseyfannitutti/mullet/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/coseyfannitutti/mysterium/rules.mk b/keyboards/coseyfannitutti/mysterium/rules.mk index 7e3df06807..8bc4495ced 100644 --- a/keyboards/coseyfannitutti/mysterium/rules.mk +++ b/keyboards/coseyfannitutti/mysterium/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = usbasploader # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/coseyfannitutti/romeo/rules.mk b/keyboards/coseyfannitutti/romeo/rules.mk index 7a50fbb778..2057d9c939 100644 --- a/keyboards/coseyfannitutti/romeo/rules.mk +++ b/keyboards/coseyfannitutti/romeo/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = usbasploader # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/cozykeys/bloomer/v2/rules.mk b/keyboards/cozykeys/bloomer/v2/rules.mk index ba2ecf38c3..6a63c958d3 100644 --- a/keyboards/cozykeys/bloomer/v2/rules.mk +++ b/keyboards/cozykeys/bloomer/v2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/crazy_keyboard_68/rules.mk b/keyboards/crazy_keyboard_68/rules.mk index 0c7306bd7c..0f10335907 100644 --- a/keyboards/crazy_keyboard_68/rules.mk +++ b/keyboards/crazy_keyboard_68/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/crbn/rules.mk b/keyboards/crbn/rules.mk index 90a7d4fe02..adaf11fd8a 100644 --- a/keyboards/crbn/rules.mk +++ b/keyboards/crbn/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/crin/rules.mk b/keyboards/crin/rules.mk index f37a75f06f..1710f6236b 100644 --- a/keyboards/crin/rules.mk +++ b/keyboards/crin/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/crkbd/keymaps/vayashiko/rules.mk b/keyboards/crkbd/keymaps/vayashiko/rules.mk index 16deaf45d1..b8ba838422 100644 --- a/keyboards/crkbd/keymaps/vayashiko/rules.mk +++ b/keyboards/crkbd/keymaps/vayashiko/rules.mk @@ -3,7 +3,7 @@ # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys(+4700) EXTRAKEY_ENABLE = no # Audio control and System control(+450) CONSOLE_ENABLE = no # Console for debug(+400) diff --git a/keyboards/crkbd/rules.mk b/keyboards/crkbd/rules.mk index 75a54ada0d..8169e78ae8 100644 --- a/keyboards/crkbd/rules.mk +++ b/keyboards/crkbd/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/cu80/rules.mk b/keyboards/cu80/rules.mk index 9b5768ea52..10102e2abf 100644 --- a/keyboards/cu80/rules.mk +++ b/keyboards/cu80/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/custommk/genesis/rev2/rules.mk b/keyboards/custommk/genesis/rev2/rules.mk index eb66cf5f24..a22df8f75f 100644 --- a/keyboards/custommk/genesis/rev2/rules.mk +++ b/keyboards/custommk/genesis/rev2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = qmk-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/custommk/genesis/rules.mk b/keyboards/custommk/genesis/rules.mk index e417e223b3..ed95e6fd07 100644 --- a/keyboards/custommk/genesis/rules.mk +++ b/keyboards/custommk/genesis/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = qmk-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/cutie_club/borsdorf/rules.mk b/keyboards/cutie_club/borsdorf/rules.mk index 3b7c0cacf3..e2d46fe667 100644 --- a/keyboards/cutie_club/borsdorf/rules.mk +++ b/keyboards/cutie_club/borsdorf/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/cutie_club/giant_macro_pad/rules.mk b/keyboards/cutie_club/giant_macro_pad/rules.mk index 3b7c0cacf3..e2d46fe667 100755 --- a/keyboards/cutie_club/giant_macro_pad/rules.mk +++ b/keyboards/cutie_club/giant_macro_pad/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/cutie_club/wraith/rules.mk b/keyboards/cutie_club/wraith/rules.mk index 575ba17005..60c0e1b193 100644 --- a/keyboards/cutie_club/wraith/rules.mk +++ b/keyboards/cutie_club/wraith/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/cx60/rules.mk b/keyboards/cx60/rules.mk index 81f481950a..aeff331e7e 100644 --- a/keyboards/cx60/rules.mk +++ b/keyboards/cx60/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/cybergear/macro25/rules.mk b/keyboards/cybergear/macro25/rules.mk index 4411195da2..9578124554 100644 --- a/keyboards/cybergear/macro25/rules.mk +++ b/keyboards/cybergear/macro25/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/daji/seis_cinco/rules.mk b/keyboards/daji/seis_cinco/rules.mk index 45d9347631..d9bb3e13aa 100644 --- a/keyboards/daji/seis_cinco/rules.mk +++ b/keyboards/daji/seis_cinco/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/dc01/arrow/rules.mk b/keyboards/dc01/arrow/rules.mk index d5b3fc0722..6a5dc9af06 100644 --- a/keyboards/dc01/arrow/rules.mk +++ b/keyboards/dc01/arrow/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/dc01/left/rules.mk b/keyboards/dc01/left/rules.mk index 7dbd6bcc03..c39b1507ec 100644 --- a/keyboards/dc01/left/rules.mk +++ b/keyboards/dc01/left/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/dc01/numpad/rules.mk b/keyboards/dc01/numpad/rules.mk index a0c9849a47..16653ef8a0 100644 --- a/keyboards/dc01/numpad/rules.mk +++ b/keyboards/dc01/numpad/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/dc01/right/rules.mk b/keyboards/dc01/right/rules.mk index d5b3fc0722..6a5dc9af06 100644 --- a/keyboards/dc01/right/rules.mk +++ b/keyboards/dc01/right/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/delikeeb/flatbread60/rules.mk b/keyboards/delikeeb/flatbread60/rules.mk index 1c21efcda4..5aa5e7a905 100644 --- a/keyboards/delikeeb/flatbread60/rules.mk +++ b/keyboards/delikeeb/flatbread60/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/delikeeb/vaguettelite/rules.mk b/keyboards/delikeeb/vaguettelite/rules.mk index 1bf9ed4187..599aa6616e 100644 --- a/keyboards/delikeeb/vaguettelite/rules.mk +++ b/keyboards/delikeeb/vaguettelite/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/delikeeb/vanana/rules.mk b/keyboards/delikeeb/vanana/rules.mk index bd9127b470..ee2cd517cf 100644 --- a/keyboards/delikeeb/vanana/rules.mk +++ b/keyboards/delikeeb/vanana/rules.mk @@ -5,7 +5,7 @@ MCU = atmega32u4 BOOTLOADER = atmel-dfu # Build Options -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/delikeeb/vaneela/rules.mk b/keyboards/delikeeb/vaneela/rules.mk index 1f14fe5196..c1149216c2 100644 --- a/keyboards/delikeeb/vaneela/rules.mk +++ b/keyboards/delikeeb/vaneela/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/delikeeb/vaneelaex/rules.mk b/keyboards/delikeeb/vaneelaex/rules.mk index 1f14fe5196..c1149216c2 100644 --- a/keyboards/delikeeb/vaneelaex/rules.mk +++ b/keyboards/delikeeb/vaneelaex/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/delikeeb/waaffle/rev3/rules.mk b/keyboards/delikeeb/waaffle/rev3/rules.mk index a4b9ea3933..130155735d 100644 --- a/keyboards/delikeeb/waaffle/rev3/rules.mk +++ b/keyboards/delikeeb/waaffle/rev3/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/delilah/rules.mk b/keyboards/delilah/rules.mk index 59c60ebbec..438c9fdf73 100644 --- a/keyboards/delilah/rules.mk +++ b/keyboards/delilah/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/dk60/rules.mk b/keyboards/dk60/rules.mk index c3c93b823c..d23cfda0e4 100644 --- a/keyboards/dk60/rules.mk +++ b/keyboards/dk60/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/dmqdesign/spin/keymaps/spidey3_pad/rules.mk b/keyboards/dmqdesign/spin/keymaps/spidey3_pad/rules.mk index 00b815f56d..7fe1f992aa 100644 --- a/keyboards/dmqdesign/spin/keymaps/spidey3_pad/rules.mk +++ b/keyboards/dmqdesign/spin/keymaps/spidey3_pad/rules.mk @@ -1,6 +1,6 @@ MOUSEKEY_ENABLE = no MIDI_ENABLE = no -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite LTO_ENABLE = yes CONSOLE_ENABLE = yes # Console for debug GRAVE_ESC_ENABLE = no diff --git a/keyboards/do60/rules.mk b/keyboards/do60/rules.mk index ca6e2146c1..418217e096 100644 --- a/keyboards/do60/rules.mk +++ b/keyboards/do60/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options AUDIO_ENABLE = no # Audio output BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite COMMAND_ENABLE = no # Commands for debug and configuration CONSOLE_ENABLE = no # Console for debug EXTRAKEY_ENABLE = yes # Audio control and System control diff --git a/keyboards/donutcables/scrabblepad/rules.mk b/keyboards/donutcables/scrabblepad/rules.mk index 78fbb71b4e..b2c3b22c2a 100644 --- a/keyboards/donutcables/scrabblepad/rules.mk +++ b/keyboards/donutcables/scrabblepad/rules.mk @@ -5,7 +5,7 @@ MCU = at90usb1286 BOOTLOADER = halfkay # Build Options -BOOTMAGIC_ENABLE = no # Enable Bootmagic +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/doppelganger/rules.mk b/keyboards/doppelganger/rules.mk index 161d6da26b..cc5477a3bd 100644 --- a/keyboards/doppelganger/rules.mk +++ b/keyboards/doppelganger/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/doro67/multi/keymaps/konstantin/rules.mk b/keyboards/doro67/multi/keymaps/konstantin/rules.mk index 10ff0bc915..7bab7513ed 100644 --- a/keyboards/doro67/multi/keymaps/konstantin/rules.mk +++ b/keyboards/doro67/multi/keymaps/konstantin/rules.mk @@ -1,5 +1,5 @@ # Generic features -BOOTMAGIC_ENABLE = yes +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite COMMAND_ENABLE = yes CONSOLE_ENABLE = yes EXTRAKEY_ENABLE = yes diff --git a/keyboards/doro67/multi/rules.mk b/keyboards/doro67/multi/rules.mk index 1318a76a25..9a09abb565 100644 --- a/keyboards/doro67/multi/rules.mk +++ b/keyboards/doro67/multi/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/doro67/regular/rules.mk b/keyboards/doro67/regular/rules.mk index 77d1bbc28a..df57d4837e 100644 --- a/keyboards/doro67/regular/rules.mk +++ b/keyboards/doro67/regular/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/doro67/rgb/rules.mk b/keyboards/doro67/rgb/rules.mk index 2a575b3e97..bc9b2d2c2c 100644 --- a/keyboards/doro67/rgb/rules.mk +++ b/keyboards/doro67/rgb/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/dp60/rules.mk b/keyboards/dp60/rules.mk index be421280a7..059e29016e 100644 --- a/keyboards/dp60/rules.mk +++ b/keyboards/dp60/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/draytronics/daisy/rules.mk b/keyboards/draytronics/daisy/rules.mk index cc1a640c3c..d46afbf9d2 100644 --- a/keyboards/draytronics/daisy/rules.mk +++ b/keyboards/draytronics/daisy/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = usbasploader # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/draytronics/elise/rules.mk b/keyboards/draytronics/elise/rules.mk index ef4e43a086..6bbe5afe83 100644 --- a/keyboards/draytronics/elise/rules.mk +++ b/keyboards/draytronics/elise/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/draytronics/scarlet/rules.mk b/keyboards/draytronics/scarlet/rules.mk index 26008e03f4..6d6679ef3d 100644 --- a/keyboards/draytronics/scarlet/rules.mk +++ b/keyboards/draytronics/scarlet/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = usbasploader # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/dtisaac/dtisaac01/rules.mk b/keyboards/dtisaac/dtisaac01/rules.mk index dc64cef323..5d08412d65 100644 --- a/keyboards/dtisaac/dtisaac01/rules.mk +++ b/keyboards/dtisaac/dtisaac01/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/duck/eagle_viper/v2/rules.mk b/keyboards/duck/eagle_viper/v2/rules.mk index 7da0ea7f4c..ecc221f949 100644 --- a/keyboards/duck/eagle_viper/v2/rules.mk +++ b/keyboards/duck/eagle_viper/v2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/duck/jetfire/rules.mk b/keyboards/duck/jetfire/rules.mk index 9ec067e0c0..f8e4e1052e 100644 --- a/keyboards/duck/jetfire/rules.mk +++ b/keyboards/duck/jetfire/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = no # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/duck/octagon/v1/rules.mk b/keyboards/duck/octagon/v1/rules.mk index 216a5b14cd..aceb2aa2f3 100644 --- a/keyboards/duck/octagon/v1/rules.mk +++ b/keyboards/duck/octagon/v1/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = no # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/duck/octagon/v2/rules.mk b/keyboards/duck/octagon/v2/rules.mk index 455abba8ad..aa11021233 100644 --- a/keyboards/duck/octagon/v2/rules.mk +++ b/keyboards/duck/octagon/v2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = no # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/duck/orion/v3/rules.mk b/keyboards/duck/orion/v3/rules.mk index 5206228b3e..c582f6981c 100644 --- a/keyboards/duck/orion/v3/rules.mk +++ b/keyboards/duck/orion/v3/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/duck/tcv3/rules.mk b/keyboards/duck/tcv3/rules.mk index ecc9f56585..fa0be90927 100644 --- a/keyboards/duck/tcv3/rules.mk +++ b/keyboards/duck/tcv3/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = no # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ducky/one2mini/1861st/rules.mk b/keyboards/ducky/one2mini/1861st/rules.mk index 0b2fedd8d8..65d4a1b3a8 100644 --- a/keyboards/ducky/one2mini/1861st/rules.mk +++ b/keyboards/ducky/one2mini/1861st/rules.mk @@ -16,7 +16,7 @@ ARMV = 6 # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/dumbpad/v0x/rules.mk b/keyboards/dumbpad/v0x/rules.mk index f5252179f6..6302e98d3e 100644 --- a/keyboards/dumbpad/v0x/rules.mk +++ b/keyboards/dumbpad/v0x/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/dumbpad/v0x_dualencoder/rules.mk b/keyboards/dumbpad/v0x_dualencoder/rules.mk index f5252179f6..6302e98d3e 100644 --- a/keyboards/dumbpad/v0x_dualencoder/rules.mk +++ b/keyboards/dumbpad/v0x_dualencoder/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/dumbpad/v0x_right/rules.mk b/keyboards/dumbpad/v0x_right/rules.mk index f5252179f6..6302e98d3e 100644 --- a/keyboards/dumbpad/v0x_right/rules.mk +++ b/keyboards/dumbpad/v0x_right/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/dumbpad/v1x/rules.mk b/keyboards/dumbpad/v1x/rules.mk index f5252179f6..6302e98d3e 100644 --- a/keyboards/dumbpad/v1x/rules.mk +++ b/keyboards/dumbpad/v1x/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/dumbpad/v1x_dualencoder/rules.mk b/keyboards/dumbpad/v1x_dualencoder/rules.mk index f5252179f6..6302e98d3e 100644 --- a/keyboards/dumbpad/v1x_dualencoder/rules.mk +++ b/keyboards/dumbpad/v1x_dualencoder/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/dumbpad/v1x_right/rules.mk b/keyboards/dumbpad/v1x_right/rules.mk index f5252179f6..6302e98d3e 100644 --- a/keyboards/dumbpad/v1x_right/rules.mk +++ b/keyboards/dumbpad/v1x_right/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/durgod/dgk6x/rules.mk b/keyboards/durgod/dgk6x/rules.mk index 56097ed660..e6129f5716 100644 --- a/keyboards/durgod/dgk6x/rules.mk +++ b/keyboards/durgod/dgk6x/rules.mk @@ -10,7 +10,7 @@ NO_SUSPEND_POWER_DOWN = yes # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/durgod/k3x0/rules.mk b/keyboards/durgod/k3x0/rules.mk index 827f223653..327c1723b7 100644 --- a/keyboards/durgod/k3x0/rules.mk +++ b/keyboards/durgod/k3x0/rules.mk @@ -12,7 +12,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/dyz/dyz60/rules.mk b/keyboards/dyz/dyz60/rules.mk index 02bed4240e..209bdae2ee 100644 --- a/keyboards/dyz/dyz60/rules.mk +++ b/keyboards/dyz/dyz60/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/dz60/keymaps/LEdiodes/rules.mk b/keyboards/dz60/keymaps/LEdiodes/rules.mk index 2dbd6bd5d4..2f6622e587 100644 --- a/keyboards/dz60/keymaps/LEdiodes/rules.mk +++ b/keyboards/dz60/keymaps/LEdiodes/rules.mk @@ -1,7 +1,7 @@ # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = no # Console for debug(+400) diff --git a/keyboards/dz60/keymaps/konstantin_b/rules.mk b/keyboards/dz60/keymaps/konstantin_b/rules.mk index c1eb43da2c..18ea01311f 100644 --- a/keyboards/dz60/keymaps/konstantin_b/rules.mk +++ b/keyboards/dz60/keymaps/konstantin_b/rules.mk @@ -1,7 +1,7 @@ USER_NAME := konstantin # Generic features -BOOTMAGIC_ENABLE = yes +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite COMMAND_ENABLE = yes CONSOLE_ENABLE = yes EXTRAKEY_ENABLE = yes diff --git a/keyboards/dz60/keymaps/krusli/rules.mk b/keyboards/dz60/keymaps/krusli/rules.mk index c6a19afa4d..3207000a16 100644 --- a/keyboards/dz60/keymaps/krusli/rules.mk +++ b/keyboards/dz60/keymaps/krusli/rules.mk @@ -1,7 +1,7 @@ # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = no # Console for debug(+400) diff --git a/keyboards/dz60/keymaps/marianas/rules.mk b/keyboards/dz60/keymaps/marianas/rules.mk index d647c9de85..11eb15fe15 100644 --- a/keyboards/dz60/keymaps/marianas/rules.mk +++ b/keyboards/dz60/keymaps/marianas/rules.mk @@ -3,7 +3,7 @@ # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = no # Console for debug(+400) diff --git a/keyboards/dz60/keymaps/mechmerlin/readme.md b/keyboards/dz60/keymaps/mechmerlin/readme.md index 76ff54de54..9c53288fea 100644 --- a/keyboards/dz60/keymaps/mechmerlin/readme.md +++ b/keyboards/dz60/keymaps/mechmerlin/readme.md @@ -45,7 +45,7 @@ This is the control layer also known as layer 2. It utilizes the following: --- ### RESET -As long `BOOTMAGIC_ENABLE` is set to `yes` in `rules.mk`, the DZ60 can be put into bootloader mode by holding the `space` key and the `b` key while plugging in. However sometmes this doesn't work or is troublesome to do, might as well use the `RESET` keycode to accomplish this. +As long `BOOTMAGIC_ENABLE` is set to `yes` in `rules.mk`, the DZ60 can be put into bootloader mode by holding the `Escape` key while plugging in. However sometmes this doesn't work or is troublesome to do, might as well use the `RESET` keycode to accomplish this. ### RSFT_T(KC_SLSH) diff --git a/keyboards/dz60/keymaps/niclake/rules.mk b/keyboards/dz60/keymaps/niclake/rules.mk index 0b4dadb10e..31d6053e03 100644 --- a/keyboards/dz60/keymaps/niclake/rules.mk +++ b/keyboards/dz60/keymaps/niclake/rules.mk @@ -1,3 +1,3 @@ COMMAND_ENABLE = no RGBLIGHT_ENABLE = yes -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite diff --git a/keyboards/dz60/keymaps/pinpox/rules.mk b/keyboards/dz60/keymaps/pinpox/rules.mk index 855a1e5e6e..7e4fd5d349 100644 --- a/keyboards/dz60/keymaps/pinpox/rules.mk +++ b/keyboards/dz60/keymaps/pinpox/rules.mk @@ -1 +1 @@ -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite diff --git a/keyboards/dz60/rules.mk b/keyboards/dz60/rules.mk index 59be7b0751..9d8586ede3 100644 --- a/keyboards/dz60/rules.mk +++ b/keyboards/dz60/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/dztech/bocc/rules.mk b/keyboards/dztech/bocc/rules.mk index 81f481950a..aeff331e7e 100644 --- a/keyboards/dztech/bocc/rules.mk +++ b/keyboards/dztech/bocc/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/dztech/dz60rgb/v1/rules.mk b/keyboards/dztech/dz60rgb/v1/rules.mk index 8b6dda84db..e055ded922 100644 --- a/keyboards/dztech/dz60rgb/v1/rules.mk +++ b/keyboards/dztech/dz60rgb/v1/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/dztech/dz60rgb/v2/rules.mk b/keyboards/dztech/dz60rgb/v2/rules.mk index c4d5352324..41fdb211ed 100644 --- a/keyboards/dztech/dz60rgb/v2/rules.mk +++ b/keyboards/dztech/dz60rgb/v2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/dztech/dz60rgb/v2_1/rules.mk b/keyboards/dztech/dz60rgb/v2_1/rules.mk index 2e0e6f0bcb..831b1b94f8 100644 --- a/keyboards/dztech/dz60rgb/v2_1/rules.mk +++ b/keyboards/dztech/dz60rgb/v2_1/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER_SIZE = 6144 # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/dztech/dz60rgb_ansi/v1/rules.mk b/keyboards/dztech/dz60rgb_ansi/v1/rules.mk index 8b6dda84db..e055ded922 100644 --- a/keyboards/dztech/dz60rgb_ansi/v1/rules.mk +++ b/keyboards/dztech/dz60rgb_ansi/v1/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/dztech/dz60rgb_ansi/v2/rules.mk b/keyboards/dztech/dz60rgb_ansi/v2/rules.mk index c4d5352324..41fdb211ed 100644 --- a/keyboards/dztech/dz60rgb_ansi/v2/rules.mk +++ b/keyboards/dztech/dz60rgb_ansi/v2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/dztech/dz60rgb_ansi/v2_1/rules.mk b/keyboards/dztech/dz60rgb_ansi/v2_1/rules.mk index aa2092d4df..c52676f87f 100644 --- a/keyboards/dztech/dz60rgb_ansi/v2_1/rules.mk +++ b/keyboards/dztech/dz60rgb_ansi/v2_1/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER_SIZE = 6144 # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/dztech/dz60rgb_wkl/v1/rules.mk b/keyboards/dztech/dz60rgb_wkl/v1/rules.mk index 772964b55a..d5f879081a 100644 --- a/keyboards/dztech/dz60rgb_wkl/v1/rules.mk +++ b/keyboards/dztech/dz60rgb_wkl/v1/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/dztech/dz60rgb_wkl/v2/rules.mk b/keyboards/dztech/dz60rgb_wkl/v2/rules.mk index ac27bbf140..89aea76078 100644 --- a/keyboards/dztech/dz60rgb_wkl/v2/rules.mk +++ b/keyboards/dztech/dz60rgb_wkl/v2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/dztech/dz60rgb_wkl/v2_1/rules.mk b/keyboards/dztech/dz60rgb_wkl/v2_1/rules.mk index 90fb2d5f41..1f81ab573a 100644 --- a/keyboards/dztech/dz60rgb_wkl/v2_1/rules.mk +++ b/keyboards/dztech/dz60rgb_wkl/v2_1/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER_SIZE = 6144 # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/dztech/dz65rgb/v1/rules.mk b/keyboards/dztech/dz65rgb/v1/rules.mk index 9f2c7b41cb..32233c3e94 100644 --- a/keyboards/dztech/dz65rgb/v1/rules.mk +++ b/keyboards/dztech/dz65rgb/v1/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/dztech/dz65rgb/v2/rules.mk b/keyboards/dztech/dz65rgb/v2/rules.mk index c8c752f5b2..5b7a9ae3a2 100644 --- a/keyboards/dztech/dz65rgb/v2/rules.mk +++ b/keyboards/dztech/dz65rgb/v2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/dztech/dz65rgb/v3/rules.mk b/keyboards/dztech/dz65rgb/v3/rules.mk index 4a5a4f32dc..5623823ae4 100755 --- a/keyboards/dztech/dz65rgb/v3/rules.mk +++ b/keyboards/dztech/dz65rgb/v3/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER_SIZE = 6144 # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/dztech/dz96/rules.mk b/keyboards/dztech/dz96/rules.mk index 0641b5d22e..4f1faaec80 100644 --- a/keyboards/dztech/dz96/rules.mk +++ b/keyboards/dztech/dz96/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/e88/rules.mk b/keyboards/e88/rules.mk index c0d8b52500..2c660c9867 100644 --- a/keyboards/e88/rules.mk +++ b/keyboards/e88/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = qmk-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/earth_rover/rules.mk b/keyboards/earth_rover/rules.mk index 1f14fe5196..c1149216c2 100644 --- a/keyboards/earth_rover/rules.mk +++ b/keyboards/earth_rover/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ebastler/isometria_75/rev1/rules.mk b/keyboards/ebastler/isometria_75/rev1/rules.mk index 4a3ba03d98..85d85a70ab 100644 --- a/keyboards/ebastler/isometria_75/rev1/rules.mk +++ b/keyboards/ebastler/isometria_75/rev1/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/edc40/rules.mk b/keyboards/edc40/rules.mk index 5968ac7e0a..4bda63662a 100644 --- a/keyboards/edc40/rules.mk +++ b/keyboards/edc40/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/edda/rules.mk b/keyboards/edda/rules.mk index 647687f0d3..d5cb34b852 100644 --- a/keyboards/edda/rules.mk +++ b/keyboards/edda/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = qmk-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/edi/hardlight/mk1/rules.mk b/keyboards/edi/hardlight/mk1/rules.mk index 42dc95e6d0..c3af341ad9 100644 --- a/keyboards/edi/hardlight/mk1/rules.mk +++ b/keyboards/edi/hardlight/mk1/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/eek/rules.mk b/keyboards/eek/rules.mk index f1bac8abeb..c2b406abeb 100644 --- a/keyboards/eek/rules.mk +++ b/keyboards/eek/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = qmk-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/efreet/rules.mk b/keyboards/efreet/rules.mk index 8cd5547bc9..cf6c485661 100644 --- a/keyboards/efreet/rules.mk +++ b/keyboards/efreet/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/eggman/rules.mk b/keyboards/eggman/rules.mk index c781d058e7..b309c4db77 100644 --- a/keyboards/eggman/rules.mk +++ b/keyboards/eggman/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/emajesty/eiri/rules.mk b/keyboards/emajesty/eiri/rules.mk index 1f14fe5196..c1149216c2 100644 --- a/keyboards/emajesty/eiri/rules.mk +++ b/keyboards/emajesty/eiri/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/emi20/rules.mk b/keyboards/emi20/rules.mk index 6a471b03e2..2eb9369659 100644 --- a/keyboards/emi20/rules.mk +++ b/keyboards/emi20/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/eniigmakeyboards/ek60/rules.mk b/keyboards/eniigmakeyboards/ek60/rules.mk index ada495bf9d..c14a1c5088 100644 --- a/keyboards/eniigmakeyboards/ek60/rules.mk +++ b/keyboards/eniigmakeyboards/ek60/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/eniigmakeyboards/ek65/rules.mk b/keyboards/eniigmakeyboards/ek65/rules.mk index c79f74e34b..9906266f48 100644 --- a/keyboards/eniigmakeyboards/ek65/rules.mk +++ b/keyboards/eniigmakeyboards/ek65/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/eniigmakeyboards/ek87/rules.mk b/keyboards/eniigmakeyboards/ek87/rules.mk index d2df5bff40..ab4a4e3e61 100644 --- a/keyboards/eniigmakeyboards/ek87/rules.mk +++ b/keyboards/eniigmakeyboards/ek87/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ep/comsn/hs68/rules.mk b/keyboards/ep/comsn/hs68/rules.mk index 077733ea87..bcf7f652ec 100644 --- a/keyboards/ep/comsn/hs68/rules.mk +++ b/keyboards/ep/comsn/hs68/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/ep/comsn/mollydooker/rules.mk b/keyboards/ep/comsn/mollydooker/rules.mk index 58a1405de2..c9228dd8df 100644 --- a/keyboards/ep/comsn/mollydooker/rules.mk +++ b/keyboards/ep/comsn/mollydooker/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/ep/comsn/tf_longeboye/rules.mk b/keyboards/ep/comsn/tf_longeboye/rules.mk index df18dc487e..5c194d1aeb 100644 --- a/keyboards/ep/comsn/tf_longeboye/rules.mk +++ b/keyboards/ep/comsn/tf_longeboye/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/epoch80/rules.mk b/keyboards/epoch80/rules.mk index f985f2cb0e..94c5d640ae 100644 --- a/keyboards/epoch80/rules.mk +++ b/keyboards/epoch80/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ergoarrows/rules.mk b/keyboards/ergoarrows/rules.mk index b32cbc2f64..9bdc73b761 100644 --- a/keyboards/ergoarrows/rules.mk +++ b/keyboards/ergoarrows/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ergosaurus/rules.mk b/keyboards/ergosaurus/rules.mk index 93b442460f..07a7efce74 100644 --- a/keyboards/ergosaurus/rules.mk +++ b/keyboards/ergosaurus/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/ergotravel/keymaps/yanfali/rules.mk b/keyboards/ergotravel/keymaps/yanfali/rules.mk index 16409396a1..ab3621cd7e 100644 --- a/keyboards/ergotravel/keymaps/yanfali/rules.mk +++ b/keyboards/ergotravel/keymaps/yanfali/rules.mk @@ -1,6 +1,6 @@ BOOTLOADER = qmk-dfu -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = yes # Commands for debug and configuration RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. diff --git a/keyboards/ericrlau/numdiscipline/rev1/rules.mk b/keyboards/ericrlau/numdiscipline/rev1/rules.mk index 49a15005c4..c1b6074978 100644 --- a/keyboards/ericrlau/numdiscipline/rev1/rules.mk +++ b/keyboards/ericrlau/numdiscipline/rev1/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = usbasploader # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/esca/getawayvan/rules.mk b/keyboards/esca/getawayvan/rules.mk index 2544bca287..a7596be365 100644 --- a/keyboards/esca/getawayvan/rules.mk +++ b/keyboards/esca/getawayvan/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/espectro/rules.mk b/keyboards/espectro/rules.mk index b1ba21f36e..42b4288ff1 100755 --- a/keyboards/espectro/rules.mk +++ b/keyboards/espectro/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/evolv/rules.mk b/keyboards/evolv/rules.mk index b0f7124c08..35f3cc75ee 100644 --- a/keyboards/evolv/rules.mk +++ b/keyboards/evolv/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/evyd13/atom47/rules.mk b/keyboards/evyd13/atom47/rules.mk index b966d1829f..2ed1993fbc 100644 --- a/keyboards/evyd13/atom47/rules.mk +++ b/keyboards/evyd13/atom47/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = qmk-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/evyd13/eon40/rules.mk b/keyboards/evyd13/eon40/rules.mk index c2981962d1..fc92321702 100644 --- a/keyboards/evyd13/eon40/rules.mk +++ b/keyboards/evyd13/eon40/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = qmk-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/evyd13/eon65/rules.mk b/keyboards/evyd13/eon65/rules.mk index 15164058d7..9cf47b43a7 100644 --- a/keyboards/evyd13/eon65/rules.mk +++ b/keyboards/evyd13/eon65/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/evyd13/eon75/rules.mk b/keyboards/evyd13/eon75/rules.mk index 7a72e82b35..6d598770a3 100644 --- a/keyboards/evyd13/eon75/rules.mk +++ b/keyboards/evyd13/eon75/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/evyd13/eon87/rules.mk b/keyboards/evyd13/eon87/rules.mk index 2f8686632b..6ead804b7b 100644 --- a/keyboards/evyd13/eon87/rules.mk +++ b/keyboards/evyd13/eon87/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = qmk-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/evyd13/eon95/rules.mk b/keyboards/evyd13/eon95/rules.mk index 7a72e82b35..6d598770a3 100644 --- a/keyboards/evyd13/eon95/rules.mk +++ b/keyboards/evyd13/eon95/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/evyd13/gh80_1800/rules.mk b/keyboards/evyd13/gh80_1800/rules.mk index a67e252c7a..d9f2b4f15b 100644 --- a/keyboards/evyd13/gh80_1800/rules.mk +++ b/keyboards/evyd13/gh80_1800/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = qmk-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/evyd13/gh80_3700/rules.mk b/keyboards/evyd13/gh80_3700/rules.mk index 3affc70d0c..fdf9908627 100644 --- a/keyboards/evyd13/gh80_3700/rules.mk +++ b/keyboards/evyd13/gh80_3700/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = qmk-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/evyd13/gud70/rules.mk b/keyboards/evyd13/gud70/rules.mk index 7237e7dc1d..2ff67b2721 100644 --- a/keyboards/evyd13/gud70/rules.mk +++ b/keyboards/evyd13/gud70/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = qmk-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/evyd13/nt660/rules.mk b/keyboards/evyd13/nt660/rules.mk index 93860bde0d..2b211132c2 100644 --- a/keyboards/evyd13/nt660/rules.mk +++ b/keyboards/evyd13/nt660/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = qmk-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/evyd13/nt750/rules.mk b/keyboards/evyd13/nt750/rules.mk index e690f191b6..d0729e22b1 100644 --- a/keyboards/evyd13/nt750/rules.mk +++ b/keyboards/evyd13/nt750/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/evyd13/nt980/rules.mk b/keyboards/evyd13/nt980/rules.mk index c79f74e34b..9906266f48 100644 --- a/keyboards/evyd13/nt980/rules.mk +++ b/keyboards/evyd13/nt980/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/evyd13/omrontkl/rules.mk b/keyboards/evyd13/omrontkl/rules.mk index 37ab0dee27..dcb857f2c6 100644 --- a/keyboards/evyd13/omrontkl/rules.mk +++ b/keyboards/evyd13/omrontkl/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = qmk-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/evyd13/plain60/keymaps/kwerdenker/rules.mk b/keyboards/evyd13/plain60/keymaps/kwerdenker/rules.mk index 0b304aae35..62eb851505 100644 --- a/keyboards/evyd13/plain60/keymaps/kwerdenker/rules.mk +++ b/keyboards/evyd13/plain60/keymaps/kwerdenker/rules.mk @@ -16,7 +16,7 @@ # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work RGBLIGHT_ENABLE = yes # Enable keyboard underlight functionality (+4870) diff --git a/keyboards/evyd13/plain60/rules.mk b/keyboards/evyd13/plain60/rules.mk index d6237b3262..b7f94e84e6 100644 --- a/keyboards/evyd13/plain60/rules.mk +++ b/keyboards/evyd13/plain60/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = qmk-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/evyd13/pockettype/rules.mk b/keyboards/evyd13/pockettype/rules.mk index fc85b1aab0..df0efd3c43 100644 --- a/keyboards/evyd13/pockettype/rules.mk +++ b/keyboards/evyd13/pockettype/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/evyd13/quackfire/rules.mk b/keyboards/evyd13/quackfire/rules.mk index 13de0f45de..7593cc0a3b 100644 --- a/keyboards/evyd13/quackfire/rules.mk +++ b/keyboards/evyd13/quackfire/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = qmk-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/evyd13/solheim68/rules.mk b/keyboards/evyd13/solheim68/rules.mk index f2e5379ac1..3105d59b77 100644 --- a/keyboards/evyd13/solheim68/rules.mk +++ b/keyboards/evyd13/solheim68/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/evyd13/ta65/rules.mk b/keyboards/evyd13/ta65/rules.mk index a8c0ec30f5..bf3ad7e132 100644 --- a/keyboards/evyd13/ta65/rules.mk +++ b/keyboards/evyd13/ta65/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = qmk-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/evyd13/wasdat/keymaps/konstantin/rules.mk b/keyboards/evyd13/wasdat/keymaps/konstantin/rules.mk index f73ad286a1..e5fc55e912 100644 --- a/keyboards/evyd13/wasdat/keymaps/konstantin/rules.mk +++ b/keyboards/evyd13/wasdat/keymaps/konstantin/rules.mk @@ -1,5 +1,5 @@ # Generic features -BOOTMAGIC_ENABLE = yes +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite COMMAND_ENABLE = yes CONSOLE_ENABLE = yes EXTRAKEY_ENABLE = yes diff --git a/keyboards/evyd13/wasdat/rules.mk b/keyboards/evyd13/wasdat/rules.mk index 897c216a20..dfd38a5122 100644 --- a/keyboards/evyd13/wasdat/rules.mk +++ b/keyboards/evyd13/wasdat/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = qmk-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/evyd13/wasdat_code/rules.mk b/keyboards/evyd13/wasdat_code/rules.mk index 636e48b5ff..5c989a4939 100644 --- a/keyboards/evyd13/wasdat_code/rules.mk +++ b/keyboards/evyd13/wasdat_code/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = qmk-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/evyd13/wonderland/rules.mk b/keyboards/evyd13/wonderland/rules.mk index a8f3fcc106..efea8c1740 100644 --- a/keyboards/evyd13/wonderland/rules.mk +++ b/keyboards/evyd13/wonderland/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = qmk-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/exclusive/e65/rules.mk b/keyboards/exclusive/e65/rules.mk index a69fbc2972..aaa3b1129b 100644 --- a/keyboards/exclusive/e65/rules.mk +++ b/keyboards/exclusive/e65/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/exclusive/e6_rgb/rules.mk b/keyboards/exclusive/e6_rgb/rules.mk index e895602722..46f86ec2fe 100644 --- a/keyboards/exclusive/e6_rgb/rules.mk +++ b/keyboards/exclusive/e6_rgb/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/exclusive/e7v1/rules.mk b/keyboards/exclusive/e7v1/rules.mk index de98c36241..aea6e25e21 100644 --- a/keyboards/exclusive/e7v1/rules.mk +++ b/keyboards/exclusive/e7v1/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/exclusive/e7v1se/rules.mk b/keyboards/exclusive/e7v1se/rules.mk index dff8d21f97..c8629bd704 100644 --- a/keyboards/exclusive/e7v1se/rules.mk +++ b/keyboards/exclusive/e7v1se/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/exclusive/e85/rules.mk b/keyboards/exclusive/e85/rules.mk index 6b890e9dd9..f3856b93f0 100644 --- a/keyboards/exclusive/e85/rules.mk +++ b/keyboards/exclusive/e85/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/ez_maker/directpins/promicro/info.json b/keyboards/ez_maker/directpins/promicro/info.json index ad91afeb9a..419450385c 100644 --- a/keyboards/ez_maker/directpins/promicro/info.json +++ b/keyboards/ez_maker/directpins/promicro/info.json @@ -6,7 +6,7 @@ "debounce": 5, "diode_direction": "COL2ROW", "features": { - "bootmagic_lite": true, + "bootmagic": true, "extrakey": true, "mousekey": true }, diff --git a/keyboards/ez_maker/directpins/proton_c/info.json b/keyboards/ez_maker/directpins/proton_c/info.json index 4b72f46105..a284e5c41f 100644 --- a/keyboards/ez_maker/directpins/proton_c/info.json +++ b/keyboards/ez_maker/directpins/proton_c/info.json @@ -6,7 +6,7 @@ "processor": "STM32F303", "board": "QMK_PROTON_C", "features": { - "bootmagic_lite": true, + "bootmagic": true, "extrakey": true, "mousekey": true }, diff --git a/keyboards/ez_maker/directpins/teensy_2/info.json b/keyboards/ez_maker/directpins/teensy_2/info.json index cc2e6feec7..0c8fa672a9 100644 --- a/keyboards/ez_maker/directpins/teensy_2/info.json +++ b/keyboards/ez_maker/directpins/teensy_2/info.json @@ -7,7 +7,7 @@ "debounce": 5, "diode_direction": "COL2ROW", "features": { - "bootmagic_lite": true, + "bootmagic": true, "extrakey": true, "mousekey": true }, diff --git a/keyboards/ez_maker/directpins/teensy_2pp/info.json b/keyboards/ez_maker/directpins/teensy_2pp/info.json index 1e2e69d90e..e12544a5ef 100644 --- a/keyboards/ez_maker/directpins/teensy_2pp/info.json +++ b/keyboards/ez_maker/directpins/teensy_2pp/info.json @@ -7,7 +7,7 @@ "debounce": 5, "diode_direction": "COL2ROW", "features": { - "bootmagic_lite": true, + "bootmagic": true, "extrakey": true, "mousekey": true }, diff --git a/keyboards/ez_maker/directpins/teensy_32/info.json b/keyboards/ez_maker/directpins/teensy_32/info.json index 5de8d90a5c..e0c024ec94 100644 --- a/keyboards/ez_maker/directpins/teensy_32/info.json +++ b/keyboards/ez_maker/directpins/teensy_32/info.json @@ -5,7 +5,7 @@ "debounce": 5, "processor": "MK20DX256", "features": { - "bootmagic_lite": true, + "bootmagic": true, "extrakey": true, "mousekey": true }, diff --git a/keyboards/ez_maker/directpins/teensy_lc/info.json b/keyboards/ez_maker/directpins/teensy_lc/info.json index 882fa9ad95..bf93c41fab 100644 --- a/keyboards/ez_maker/directpins/teensy_lc/info.json +++ b/keyboards/ez_maker/directpins/teensy_lc/info.json @@ -5,7 +5,7 @@ "debounce": 5, "processor": "MKL26Z64", "features": { - "bootmagic_lite": true, + "bootmagic": true, "extrakey": true, "mousekey": true }, diff --git a/keyboards/fallacy/rules.mk b/keyboards/fallacy/rules.mk index 6032696f88..78ee2f1f69 100755 --- a/keyboards/fallacy/rules.mk +++ b/keyboards/fallacy/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/feels/feels65/rules.mk b/keyboards/feels/feels65/rules.mk index 471f877db8..c28943230a 100644 --- a/keyboards/feels/feels65/rules.mk +++ b/keyboards/feels/feels65/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/felix/rules.mk b/keyboards/felix/rules.mk index 23052482e8..3efb7c99a6 100644 --- a/keyboards/felix/rules.mk +++ b/keyboards/felix/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ferris/0_2/rules.mk b/keyboards/ferris/0_2/rules.mk index b1b9d42fbd..75ec20b4db 100644 --- a/keyboards/ferris/0_2/rules.mk +++ b/keyboards/ferris/0_2/rules.mk @@ -6,7 +6,7 @@ BOOTLOADER = stm32-dfu # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ferris/keymaps/madhatter/rules.mk b/keyboards/ferris/keymaps/madhatter/rules.mk index 76c1045744..25e61e4d5b 100644 --- a/keyboards/ferris/keymaps/madhatter/rules.mk +++ b/keyboards/ferris/keymaps/madhatter/rules.mk @@ -1,2 +1,2 @@ -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite TAP_DANCE_ENABLE = yes \ No newline at end of file diff --git a/keyboards/ffkeebs/siris/rules.mk b/keyboards/ffkeebs/siris/rules.mk index 71c43814dc..812a7965e4 100644 --- a/keyboards/ffkeebs/siris/rules.mk +++ b/keyboards/ffkeebs/siris/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/fjlabs/bks65/rules.mk b/keyboards/fjlabs/bks65/rules.mk index 3dc41b847c..64214ee66a 100644 --- a/keyboards/fjlabs/bks65/rules.mk +++ b/keyboards/fjlabs/bks65/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/fjlabs/bks65solder/rules.mk b/keyboards/fjlabs/bks65solder/rules.mk index 3dc41b847c..64214ee66a 100644 --- a/keyboards/fjlabs/bks65solder/rules.mk +++ b/keyboards/fjlabs/bks65solder/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/fjlabs/bolsa65/rules.mk b/keyboards/fjlabs/bolsa65/rules.mk index cc8bfbe210..a49a628735 100644 --- a/keyboards/fjlabs/bolsa65/rules.mk +++ b/keyboards/fjlabs/bolsa65/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/fjlabs/kf87/rules.mk b/keyboards/fjlabs/kf87/rules.mk index ed2c3a4fb5..509c10d0fd 100644 --- a/keyboards/fjlabs/kf87/rules.mk +++ b/keyboards/fjlabs/kf87/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/fjlabs/ldk65/rules.mk b/keyboards/fjlabs/ldk65/rules.mk index dbfecbc773..c6a391a1d5 100644 --- a/keyboards/fjlabs/ldk65/rules.mk +++ b/keyboards/fjlabs/ldk65/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/fjlabs/midway60/rules.mk b/keyboards/fjlabs/midway60/rules.mk index 57c789f909..4f87390759 100644 --- a/keyboards/fjlabs/midway60/rules.mk +++ b/keyboards/fjlabs/midway60/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/fjlabs/polaris/rules.mk b/keyboards/fjlabs/polaris/rules.mk index 57c789f909..4f87390759 100644 --- a/keyboards/fjlabs/polaris/rules.mk +++ b/keyboards/fjlabs/polaris/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/fjlabs/ready100/rules.mk b/keyboards/fjlabs/ready100/rules.mk index 029a96b33d..1c5940f4f7 100644 --- a/keyboards/fjlabs/ready100/rules.mk +++ b/keyboards/fjlabs/ready100/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/flehrad/numbrero/rules.mk b/keyboards/flehrad/numbrero/rules.mk index 06898ee79f..50f5eaf1cd 100644 --- a/keyboards/flehrad/numbrero/rules.mk +++ b/keyboards/flehrad/numbrero/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/flehrad/snagpad/rules.mk b/keyboards/flehrad/snagpad/rules.mk index 56e951edac..a64baaeb55 100644 --- a/keyboards/flehrad/snagpad/rules.mk +++ b/keyboards/flehrad/snagpad/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/flehrad/tradestation/rules.mk b/keyboards/flehrad/tradestation/rules.mk index 0b8cc74bf2..c129afe553 100644 --- a/keyboards/flehrad/tradestation/rules.mk +++ b/keyboards/flehrad/tradestation/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/flx/lodestone/rules.mk b/keyboards/flx/lodestone/rules.mk index 3a92f5019e..2542e5d6dc 100644 --- a/keyboards/flx/lodestone/rules.mk +++ b/keyboards/flx/lodestone/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/flx/virgo/rules.mk b/keyboards/flx/virgo/rules.mk index e81dca4b85..16501de0ae 100644 --- a/keyboards/flx/virgo/rules.mk +++ b/keyboards/flx/virgo/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/flygone60/rev3/rules.mk b/keyboards/flygone60/rev3/rules.mk index fdebc503e9..f1448c6b26 100644 --- a/keyboards/flygone60/rev3/rules.mk +++ b/keyboards/flygone60/rev3/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/foostan/cornelius/rules.mk b/keyboards/foostan/cornelius/rules.mk index c79f74e34b..9906266f48 100644 --- a/keyboards/foostan/cornelius/rules.mk +++ b/keyboards/foostan/cornelius/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/for_science/rules.mk b/keyboards/for_science/rules.mk index 82c09f7520..608ac37502 100644 --- a/keyboards/for_science/rules.mk +++ b/keyboards/for_science/rules.mk @@ -6,7 +6,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/forever65/info.json b/keyboards/forever65/info.json index bf879d92d3..6cb2442a08 100644 --- a/keyboards/forever65/info.json +++ b/keyboards/forever65/info.json @@ -14,7 +14,7 @@ "device_ver": "0x0001" }, "features": { - "bootmagic_lite": true, + "bootmagic": true, "command": false, "console": false, "extrakey": true, diff --git a/keyboards/four_banger/rules.mk b/keyboards/four_banger/rules.mk index cd13b1bc52..855e36c3dd 100644 --- a/keyboards/four_banger/rules.mk +++ b/keyboards/four_banger/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/foxlab/key65/hotswap/rules.mk b/keyboards/foxlab/key65/hotswap/rules.mk index ab6f3e1839..1074896ac5 100644 --- a/keyboards/foxlab/key65/hotswap/rules.mk +++ b/keyboards/foxlab/key65/hotswap/rules.mk @@ -4,7 +4,7 @@ MCU = atmega32u4 # Bootloader selection BOOTLOADER = atmel-dfu -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/foxlab/key65/universal/rules.mk b/keyboards/foxlab/key65/universal/rules.mk index 129979e063..60e7e46595 100644 --- a/keyboards/foxlab/key65/universal/rules.mk +++ b/keyboards/foxlab/key65/universal/rules.mk @@ -4,7 +4,7 @@ MCU = atmega32u4 # Bootloader selection BOOTLOADER = atmel-dfu -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/foxlab/leaf60/hotswap/rules.mk b/keyboards/foxlab/leaf60/hotswap/rules.mk index fb97faa5f0..0d9012c70b 100644 --- a/keyboards/foxlab/leaf60/hotswap/rules.mk +++ b/keyboards/foxlab/leaf60/hotswap/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/foxlab/leaf60/universal/rules.mk b/keyboards/foxlab/leaf60/universal/rules.mk index c4bc3f9da9..4fa1fd5e1f 100644 --- a/keyboards/foxlab/leaf60/universal/rules.mk +++ b/keyboards/foxlab/leaf60/universal/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/foxlab/time80/rules.mk b/keyboards/foxlab/time80/rules.mk index f0fbba59f4..b374eca336 100644 --- a/keyboards/foxlab/time80/rules.mk +++ b/keyboards/foxlab/time80/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = bootloadhid # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/foxlab/time_re/hotswap/rules.mk b/keyboards/foxlab/time_re/hotswap/rules.mk index 06dd8dc4cb..4023d7d3f4 100644 --- a/keyboards/foxlab/time_re/hotswap/rules.mk +++ b/keyboards/foxlab/time_re/hotswap/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/foxlab/time_re/universal/rules.mk b/keyboards/foxlab/time_re/universal/rules.mk index 8a6e35664b..20ed7beacd 100644 --- a/keyboards/foxlab/time_re/universal/rules.mk +++ b/keyboards/foxlab/time_re/universal/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/fr4/southpaw75/rules.mk b/keyboards/fr4/southpaw75/rules.mk index 4411195da2..9578124554 100644 --- a/keyboards/fr4/southpaw75/rules.mk +++ b/keyboards/fr4/southpaw75/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/fr4/unix60/rules.mk b/keyboards/fr4/unix60/rules.mk index 4411195da2..9578124554 100644 --- a/keyboards/fr4/unix60/rules.mk +++ b/keyboards/fr4/unix60/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/fractal/rules.mk b/keyboards/fractal/rules.mk index e559bef645..914a692f9c 100755 --- a/keyboards/fractal/rules.mk +++ b/keyboards/fractal/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/freyr/rules.mk b/keyboards/freyr/rules.mk index ef898806f2..f20cfda3fa 100644 --- a/keyboards/freyr/rules.mk +++ b/keyboards/freyr/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/friedrich/rules.mk b/keyboards/friedrich/rules.mk index f2e5379ac1..3105d59b77 100644 --- a/keyboards/friedrich/rules.mk +++ b/keyboards/friedrich/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/frooastboard/rules.mk b/keyboards/frooastboard/rules.mk index a3db8550f2..dde9957c71 100644 --- a/keyboards/frooastboard/rules.mk +++ b/keyboards/frooastboard/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = no # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/function96/v1/rules.mk b/keyboards/function96/v1/rules.mk index 8fac9d23a5..99d54b5c27 100644 --- a/keyboards/function96/v1/rules.mk +++ b/keyboards/function96/v1/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/function96/v2/rules.mk b/keyboards/function96/v2/rules.mk index 8fac9d23a5..99d54b5c27 100644 --- a/keyboards/function96/v2/rules.mk +++ b/keyboards/function96/v2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/funky40/rules.mk b/keyboards/funky40/rules.mk index 962a601b16..9b70c8d5b7 100644 --- a/keyboards/funky40/rules.mk +++ b/keyboards/funky40/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/gboards/gergoplex/rules.mk b/keyboards/gboards/gergoplex/rules.mk index 1d0ba8cae2..422c841146 100644 --- a/keyboards/gboards/gergoplex/rules.mk +++ b/keyboards/gboards/gergoplex/rules.mk @@ -9,7 +9,7 @@ EXTRAKEY_ENABLE = yes CONSOLE_ENABLE = no NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work COMMAND_ENABLE = yes -BOOTMAGIC_ENABLE = lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite LAYOUTS = split_3x5_3 diff --git a/keyboards/geekboards/macropad_v2/rules.mk b/keyboards/geekboards/macropad_v2/rules.mk index 3b3c2bb53c..2462b08410 100644 --- a/keyboards/geekboards/macropad_v2/rules.mk +++ b/keyboards/geekboards/macropad_v2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/geekboards/tester/rules.mk b/keyboards/geekboards/tester/rules.mk index 63c594db45..1783008e01 100644 --- a/keyboards/geekboards/tester/rules.mk +++ b/keyboards/geekboards/tester/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = qmk-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/geminate60/rules.mk b/keyboards/geminate60/rules.mk index d4807fc273..722be24d1b 100644 --- a/keyboards/geminate60/rules.mk +++ b/keyboards/geminate60/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/generic_panda/panda65_01/rules.mk b/keyboards/generic_panda/panda65_01/rules.mk index a095bbb9e7..c2aea0d505 100644 --- a/keyboards/generic_panda/panda65_01/rules.mk +++ b/keyboards/generic_panda/panda65_01/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/genone/eclipse_65/rules.mk b/keyboards/genone/eclipse_65/rules.mk index 51ae8658e1..9d2145ff0a 100644 --- a/keyboards/genone/eclipse_65/rules.mk +++ b/keyboards/genone/eclipse_65/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/genone/g1_65/rules.mk b/keyboards/genone/g1_65/rules.mk index 51ae8658e1..9d2145ff0a 100644 --- a/keyboards/genone/g1_65/rules.mk +++ b/keyboards/genone/g1_65/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/gergo/rules.mk b/keyboards/gergo/rules.mk index eee431f40a..b5752ad934 100644 --- a/keyboards/gergo/rules.mk +++ b/keyboards/gergo/rules.mk @@ -8,7 +8,7 @@ CUSTOM_MATRIX = yes EXTRAKEY_ENABLE = yes CONSOLE_ENABLE = yes COMMAND_ENABLE = yes -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite DEBOUNCE_TYPE = sym_eager_pr SRC += matrix.c diff --git a/keyboards/ggkeyboards/genesis/hotswap/rules.mk b/keyboards/ggkeyboards/genesis/hotswap/rules.mk index c5db939979..26dae43913 100644 --- a/keyboards/ggkeyboards/genesis/hotswap/rules.mk +++ b/keyboards/ggkeyboards/genesis/hotswap/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/ggkeyboards/genesis/solder/rules.mk b/keyboards/ggkeyboards/genesis/solder/rules.mk index c5db939979..26dae43913 100644 --- a/keyboards/ggkeyboards/genesis/solder/rules.mk +++ b/keyboards/ggkeyboards/genesis/solder/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/gh60/revc/rules.mk b/keyboards/gh60/revc/rules.mk index da3aaf3237..395f5dc83a 100644 --- a/keyboards/gh60/revc/rules.mk +++ b/keyboards/gh60/revc/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control # CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/gh60/satan/keymaps/denolfe/rules.mk b/keyboards/gh60/satan/keymaps/denolfe/rules.mk index e10bd7a09e..07feaa8a40 100644 --- a/keyboards/gh60/satan/keymaps/denolfe/rules.mk +++ b/keyboards/gh60/satan/keymaps/denolfe/rules.mk @@ -2,7 +2,7 @@ # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = yes # Console for debug(+400) diff --git a/keyboards/gh60/satan/keymaps/iso_split_rshift/rules.mk b/keyboards/gh60/satan/keymaps/iso_split_rshift/rules.mk index f945cdf6e3..bb2d79b90b 100644 --- a/keyboards/gh60/satan/keymaps/iso_split_rshift/rules.mk +++ b/keyboards/gh60/satan/keymaps/iso_split_rshift/rules.mk @@ -1,4 +1,4 @@ -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/gh60/satan/keymaps/olligranlund_iso/rules.mk b/keyboards/gh60/satan/keymaps/olligranlund_iso/rules.mk index b380a2710e..7041837aab 100644 --- a/keyboards/gh60/satan/keymaps/olligranlund_iso/rules.mk +++ b/keyboards/gh60/satan/keymaps/olligranlund_iso/rules.mk @@ -2,7 +2,7 @@ # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = no # Console for debug(+400) diff --git a/keyboards/gh60/satan/rules.mk b/keyboards/gh60/satan/rules.mk index 98178e17d5..11fca23b72 100644 --- a/keyboards/gh60/satan/rules.mk +++ b/keyboards/gh60/satan/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/gh60/v1p3/rules.mk b/keyboards/gh60/v1p3/rules.mk index d5d984b208..855a9c1e3f 100644 --- a/keyboards/gh60/v1p3/rules.mk +++ b/keyboards/gh60/v1p3/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/gingham/rules.mk b/keyboards/gingham/rules.mk index 63bf46ff8f..9f2fc0ee5c 100644 --- a/keyboards/gingham/rules.mk +++ b/keyboards/gingham/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = usbasploader # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/gkeyboard/gkb_m16/rules.mk b/keyboards/gkeyboard/gkb_m16/rules.mk index 706a8ae201..cf5d2e685d 100644 --- a/keyboards/gkeyboard/gkb_m16/rules.mk +++ b/keyboards/gkeyboard/gkb_m16/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/gmmk/pro/ansi/keymaps/jonavin/rules.mk b/keyboards/gmmk/pro/ansi/keymaps/jonavin/rules.mk index 90ea42dee5..1ffc2058a2 100644 --- a/keyboards/gmmk/pro/ansi/keymaps/jonavin/rules.mk +++ b/keyboards/gmmk/pro/ansi/keymaps/jonavin/rules.mk @@ -1,7 +1,7 @@ VIA_ENABLE = yes MOUSEKEY_ENABLE = no TAP_DANCE_ENABLE = yes -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite TD_LSFT_CAPSLOCK_ENABLE = yes IDLE_TIMEOUT_ENABLE = yes diff --git a/keyboards/gmmk/pro/ansi/keymaps/paddlegame/rules.mk b/keyboards/gmmk/pro/ansi/keymaps/paddlegame/rules.mk index 925d8a5a55..a3f5bfd35c 100644 --- a/keyboards/gmmk/pro/ansi/keymaps/paddlegame/rules.mk +++ b/keyboards/gmmk/pro/ansi/keymaps/paddlegame/rules.mk @@ -1,4 +1,4 @@ MOUSEKEY_ENABLE = no -BOOTMAGIC_ENABLE = lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite RGB_MATRIX_ENABLE = yes ENCODER_ENABLE = yes diff --git a/keyboards/gmmk/pro/ansi/rules.mk b/keyboards/gmmk/pro/ansi/rules.mk index ee84c48723..a10fe8e5ca 100644 --- a/keyboards/gmmk/pro/ansi/rules.mk +++ b/keyboards/gmmk/pro/ansi/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/gmmk/pro/iso/rules.mk b/keyboards/gmmk/pro/iso/rules.mk index ee84c48723..a10fe8e5ca 100644 --- a/keyboards/gmmk/pro/iso/rules.mk +++ b/keyboards/gmmk/pro/iso/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/gorthage_truck/rules.mk b/keyboards/gorthage_truck/rules.mk index a48c2c8768..21c0c67b11 100644 --- a/keyboards/gorthage_truck/rules.mk +++ b/keyboards/gorthage_truck/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/gray_studio/space65/rules.mk b/keyboards/gray_studio/space65/rules.mk index 085a80ab92..7e7e2133aa 100644 --- a/keyboards/gray_studio/space65/rules.mk +++ b/keyboards/gray_studio/space65/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/gray_studio/think65/hotswap/rules.mk b/keyboards/gray_studio/think65/hotswap/rules.mk index b2fb6341b7..cc1e1b509c 100644 --- a/keyboards/gray_studio/think65/hotswap/rules.mk +++ b/keyboards/gray_studio/think65/hotswap/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/gray_studio/think65/solder/rules.mk b/keyboards/gray_studio/think65/solder/rules.mk index b2fb6341b7..cc1e1b509c 100644 --- a/keyboards/gray_studio/think65/solder/rules.mk +++ b/keyboards/gray_studio/think65/solder/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/grid600/press/rules.mk b/keyboards/grid600/press/rules.mk index 65cc989ca1..1efd48fa9d 100644 --- a/keyboards/grid600/press/rules.mk +++ b/keyboards/grid600/press/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/gvalchca/ga150/rules.mk b/keyboards/gvalchca/ga150/rules.mk index 0e838d5c5b..9ae669ce03 100644 --- a/keyboards/gvalchca/ga150/rules.mk +++ b/keyboards/gvalchca/ga150/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = qmk-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/gvalchca/spaccboard/rules.mk b/keyboards/gvalchca/spaccboard/rules.mk index 08d857b5eb..8d02eb7490 100644 --- a/keyboards/gvalchca/spaccboard/rules.mk +++ b/keyboards/gvalchca/spaccboard/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = qmk-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/h0oni/hotduck/rules.mk b/keyboards/h0oni/hotduck/rules.mk index 421c12247b..5315f0856d 100644 --- a/keyboards/h0oni/hotduck/rules.mk +++ b/keyboards/h0oni/hotduck/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/hadron/ver3/rules.mk b/keyboards/hadron/ver3/rules.mk index c8681a1418..44c34d2ad0 100644 --- a/keyboards/hadron/ver3/rules.mk +++ b/keyboards/hadron/ver3/rules.mk @@ -9,7 +9,7 @@ BOOTLOADER = stm32-dfu # comment out to disable the options. # BACKLIGHT_ENABLE = no -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/halberd/rules.mk b/keyboards/halberd/rules.mk index 1ecd6129a5..0fd0129553 100644 --- a/keyboards/halberd/rules.mk +++ b/keyboards/halberd/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/hand88/rules.mk b/keyboards/hand88/rules.mk index ba3a8abd33..3070ff0e97 100755 --- a/keyboards/hand88/rules.mk +++ b/keyboards/hand88/rules.mk @@ -12,7 +12,7 @@ OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/2x5keypad/rules.mk b/keyboards/handwired/2x5keypad/rules.mk index 6d0028f5f6..f24ea2d096 100644 --- a/keyboards/handwired/2x5keypad/rules.mk +++ b/keyboards/handwired/2x5keypad/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina AUDIO_ENABLE = no BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite COMMAND_ENABLE = no # Commands for debug and configuration CONSOLE_ENABLE= no # Console for debug EXTRAKEY_ENABLE = yes # Audio control and System control diff --git a/keyboards/handwired/3dp660/rules.mk b/keyboards/handwired/3dp660/rules.mk index 01f24d91f0..0866edd414 100644 --- a/keyboards/handwired/3dp660/rules.mk +++ b/keyboards/handwired/3dp660/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = halfkay # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/handwired/412_64/rules.mk b/keyboards/handwired/412_64/rules.mk index f328e4f557..0b0fa6f8f3 100644 --- a/keyboards/handwired/412_64/rules.mk +++ b/keyboards/handwired/412_64/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/handwired/aek64/rules.mk b/keyboards/handwired/aek64/rules.mk index 960a0eb07a..78665308ac 100644 --- a/keyboards/handwired/aek64/rules.mk +++ b/keyboards/handwired/aek64/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = halfkay # Build Options # change to no to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/handwired/aim65/rules.mk b/keyboards/handwired/aim65/rules.mk index 1f14fe5196..c1149216c2 100644 --- a/keyboards/handwired/aim65/rules.mk +++ b/keyboards/handwired/aim65/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/amigopunk/rules.mk b/keyboards/handwired/amigopunk/rules.mk index 50e3e344c1..04e5a24644 100644 --- a/keyboards/handwired/amigopunk/rules.mk +++ b/keyboards/handwired/amigopunk/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = halfkay # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/angel/rules.mk b/keyboards/handwired/angel/rules.mk index 4411195da2..9578124554 100644 --- a/keyboards/handwired/angel/rules.mk +++ b/keyboards/handwired/angel/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/arrow_pad/keymaps/pad_21/rules.mk b/keyboards/handwired/arrow_pad/keymaps/pad_21/rules.mk index 0f1a6c15b5..8cc765c7a5 100644 --- a/keyboards/handwired/arrow_pad/keymaps/pad_21/rules.mk +++ b/keyboards/handwired/arrow_pad/keymaps/pad_21/rules.mk @@ -1,4 +1,4 @@ -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys(+4700) EXTRAKEY_ENABLE = no # Audio control and System control(+450) CONSOLE_ENABLE = no # Console for debug(+400) diff --git a/keyboards/handwired/arrow_pad/keymaps/pad_24/rules.mk b/keyboards/handwired/arrow_pad/keymaps/pad_24/rules.mk index 8863d737fa..c849339dee 100644 --- a/keyboards/handwired/arrow_pad/keymaps/pad_24/rules.mk +++ b/keyboards/handwired/arrow_pad/keymaps/pad_24/rules.mk @@ -1,4 +1,4 @@ -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys(+4700) EXTRAKEY_ENABLE = no # Audio control and System control(+450) CONSOLE_ENABLE = no # Console for debug(+400) diff --git a/keyboards/handwired/arrow_pad/rules.mk b/keyboards/handwired/arrow_pad/rules.mk index d6180989bf..09b448f271 100644 --- a/keyboards/handwired/arrow_pad/rules.mk +++ b/keyboards/handwired/arrow_pad/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = halfkay # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/handwired/axon/rules.mk b/keyboards/handwired/axon/rules.mk index 7a50fbb778..2057d9c939 100644 --- a/keyboards/handwired/axon/rules.mk +++ b/keyboards/handwired/axon/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = usbasploader # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/battleship_gamepad/rules.mk b/keyboards/handwired/battleship_gamepad/rules.mk index b7a26d8fc5..df6e244b7d 100644 --- a/keyboards/handwired/battleship_gamepad/rules.mk +++ b/keyboards/handwired/battleship_gamepad/rules.mk @@ -9,7 +9,7 @@ SRC += analog.c # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/bigmac/rules.mk b/keyboards/handwired/bigmac/rules.mk index 077733ea87..bcf7f652ec 100644 --- a/keyboards/handwired/bigmac/rules.mk +++ b/keyboards/handwired/bigmac/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/handwired/bolek/rules.mk b/keyboards/handwired/bolek/rules.mk index 1f14fe5196..c1149216c2 100644 --- a/keyboards/handwired/bolek/rules.mk +++ b/keyboards/handwired/bolek/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/boss566y/redragon_vara/rules.mk b/keyboards/handwired/boss566y/redragon_vara/rules.mk index 9aee16add8..9f4b29f22e 100644 --- a/keyboards/handwired/boss566y/redragon_vara/rules.mk +++ b/keyboards/handwired/boss566y/redragon_vara/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = halfkay # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/brain/rules.mk b/keyboards/handwired/brain/rules.mk index ee73d1507e..a24edf27f8 100644 --- a/keyboards/handwired/brain/rules.mk +++ b/keyboards/handwired/brain/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/cans12er/rules.mk b/keyboards/handwired/cans12er/rules.mk index d32194b97f..32a2c4e5df 100644 --- a/keyboards/handwired/cans12er/rules.mk +++ b/keyboards/handwired/cans12er/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/co60/rev1/rules.mk b/keyboards/handwired/co60/rev1/rules.mk index 8301ebd7c1..ab65c6873c 100644 --- a/keyboards/handwired/co60/rev1/rules.mk +++ b/keyboards/handwired/co60/rev1/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/colorlice/rules.mk b/keyboards/handwired/colorlice/rules.mk index d7f2f5c48a..3dfdacb8a8 100644 --- a/keyboards/handwired/colorlice/rules.mk +++ b/keyboards/handwired/colorlice/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/concertina/64key/rules.mk b/keyboards/handwired/concertina/64key/rules.mk index 4dde08b00b..b5a104abfb 100644 --- a/keyboards/handwired/concertina/64key/rules.mk +++ b/keyboards/handwired/concertina/64key/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/consolekeyboard/18key/rules.mk b/keyboards/handwired/consolekeyboard/18key/rules.mk index c9542aa6af..448051e2af 100644 --- a/keyboards/handwired/consolekeyboard/18key/rules.mk +++ b/keyboards/handwired/consolekeyboard/18key/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/consolekeyboard/20key/rules.mk b/keyboards/handwired/consolekeyboard/20key/rules.mk index c9542aa6af..448051e2af 100644 --- a/keyboards/handwired/consolekeyboard/20key/rules.mk +++ b/keyboards/handwired/consolekeyboard/20key/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/consolekeyboard/27key/rules.mk b/keyboards/handwired/consolekeyboard/27key/rules.mk index c9542aa6af..448051e2af 100644 --- a/keyboards/handwired/consolekeyboard/27key/rules.mk +++ b/keyboards/handwired/consolekeyboard/27key/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/consolekeyboard/30key/rules.mk b/keyboards/handwired/consolekeyboard/30key/rules.mk index c9542aa6af..448051e2af 100644 --- a/keyboards/handwired/consolekeyboard/30key/rules.mk +++ b/keyboards/handwired/consolekeyboard/30key/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/curiosity/rules.mk b/keyboards/handwired/curiosity/rules.mk index e9094c06f9..ede7873722 100644 --- a/keyboards/handwired/curiosity/rules.mk +++ b/keyboards/handwired/curiosity/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/dactyl_manuform/5x6_2_5/rules.mk b/keyboards/handwired/dactyl_manuform/5x6_2_5/rules.mk index 8bdf1dc61b..3262f7fad2 100644 --- a/keyboards/handwired/dactyl_manuform/5x6_2_5/rules.mk +++ b/keyboards/handwired/dactyl_manuform/5x6_2_5/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/dactyl_manuform/5x6_5/keymaps/cykedev/rules.mk b/keyboards/handwired/dactyl_manuform/5x6_5/keymaps/cykedev/rules.mk index d720c0c2db..0b99981410 100644 --- a/keyboards/handwired/dactyl_manuform/5x6_5/keymaps/cykedev/rules.mk +++ b/keyboards/handwired/dactyl_manuform/5x6_5/keymaps/cykedev/rules.mk @@ -1,4 +1,4 @@ -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite EXTRAKEY_ENABLE = yes COMMAND_ENABLE = yes MOUSEKEY_ENABLE = no diff --git a/keyboards/handwired/dactyl_manuform/5x6_5/rules.mk b/keyboards/handwired/dactyl_manuform/5x6_5/rules.mk index 9bde63fcc2..a4ef754fcb 100644 --- a/keyboards/handwired/dactyl_manuform/5x6_5/rules.mk +++ b/keyboards/handwired/dactyl_manuform/5x6_5/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/ddg_56/rules.mk b/keyboards/handwired/ddg_56/rules.mk index 7524b23a98..ac0b911826 100644 --- a/keyboards/handwired/ddg_56/rules.mk +++ b/keyboards/handwired/ddg_56/rules.mk @@ -9,7 +9,7 @@ BOOTLOADER = stm32-dfu # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = no # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/eagleii/rules.mk b/keyboards/handwired/eagleii/rules.mk index 4b542ab88b..6b7ab7ed77 100644 --- a/keyboards/handwired/eagleii/rules.mk +++ b/keyboards/handwired/eagleii/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes EXTRAKEY_ENABLE = yes CONSOLE_ENABLE = no diff --git a/keyboards/handwired/elrgo_s/rules.mk b/keyboards/handwired/elrgo_s/rules.mk index 2a86c6eb70..3262f7fad2 100644 --- a/keyboards/handwired/elrgo_s/rules.mk +++ b/keyboards/handwired/elrgo_s/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/ergocheap/rules.mk b/keyboards/handwired/ergocheap/rules.mk index 64c1510c3d..f57b313def 100644 --- a/keyboards/handwired/ergocheap/rules.mk +++ b/keyboards/handwired/ergocheap/rules.mk @@ -10,7 +10,7 @@ OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/handwired/fc200rt_qmk/rules.mk b/keyboards/handwired/fc200rt_qmk/rules.mk index 8f50a8b623..c7a6e6d6a8 100644 --- a/keyboards/handwired/fc200rt_qmk/rules.mk +++ b/keyboards/handwired/fc200rt_qmk/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = halfkay # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/handwired/frankie_macropad/rules.mk b/keyboards/handwired/frankie_macropad/rules.mk index 5f1537097e..41c6491fb8 100644 --- a/keyboards/handwired/frankie_macropad/rules.mk +++ b/keyboards/handwired/frankie_macropad/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/fruity60/rules.mk b/keyboards/handwired/fruity60/rules.mk index 855bd38313..19da0629e5 100644 --- a/keyboards/handwired/fruity60/rules.mk +++ b/keyboards/handwired/fruity60/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/handwired/hexon38/rules.mk b/keyboards/handwired/hexon38/rules.mk index 774005f600..3a565a9774 100644 --- a/keyboards/handwired/hexon38/rules.mk +++ b/keyboards/handwired/hexon38/rules.mk @@ -5,7 +5,7 @@ MCU = atmega32u4 BOOTLOADER = halfkay # Enabled build options: -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/handwired/hnah108/rules.mk b/keyboards/handwired/hnah108/rules.mk index 38710c1274..a89ccfc24b 100644 --- a/keyboards/handwired/hnah108/rules.mk +++ b/keyboards/handwired/hnah108/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/hnah40rgb/rules.mk b/keyboards/handwired/hnah40rgb/rules.mk index ebe3bc3a63..f909608db9 100644 --- a/keyboards/handwired/hnah40rgb/rules.mk +++ b/keyboards/handwired/hnah40rgb/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = no # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/ibm_wheelwriter/rules.mk b/keyboards/handwired/ibm_wheelwriter/rules.mk index 077733ea87..bcf7f652ec 100644 --- a/keyboards/handwired/ibm_wheelwriter/rules.mk +++ b/keyboards/handwired/ibm_wheelwriter/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/handwired/juliet/rules.mk b/keyboards/handwired/juliet/rules.mk index 480218cffe..1ab42df828 100644 --- a/keyboards/handwired/juliet/rules.mk +++ b/keyboards/handwired/juliet/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/k_numpad17/rules.mk b/keyboards/handwired/k_numpad17/rules.mk index dfce990dc8..90645230e0 100644 --- a/keyboards/handwired/k_numpad17/rules.mk +++ b/keyboards/handwired/k_numpad17/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/handwired/leftynumpad/rules.mk b/keyboards/handwired/leftynumpad/rules.mk index c79f74e34b..9906266f48 100644 --- a/keyboards/handwired/leftynumpad/rules.mk +++ b/keyboards/handwired/leftynumpad/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/marauder/rules.mk b/keyboards/handwired/marauder/rules.mk index 8ddccad3be..517abca1d4 100644 --- a/keyboards/handwired/marauder/rules.mk +++ b/keyboards/handwired/marauder/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/minorca/keymaps/ridingqwerty/rules.mk b/keyboards/handwired/minorca/keymaps/ridingqwerty/rules.mk index 2a28f5acab..10f2309f01 100644 --- a/keyboards/handwired/minorca/keymaps/ridingqwerty/rules.mk +++ b/keyboards/handwired/minorca/keymaps/ridingqwerty/rules.mk @@ -2,5 +2,5 @@ # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite UNICODEMAP_ENABLE = yes # Unicode Map diff --git a/keyboards/handwired/minorca/rules.mk b/keyboards/handwired/minorca/rules.mk index f4cff6059d..d1fe5d8a28 100644 --- a/keyboards/handwired/minorca/rules.mk +++ b/keyboards/handwired/minorca/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = halfkay # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/obuwunkunubi/spaget/rules.mk b/keyboards/handwired/obuwunkunubi/spaget/rules.mk index ce2063a46d..372c6c7ea6 100644 --- a/keyboards/handwired/obuwunkunubi/spaget/rules.mk +++ b/keyboards/handwired/obuwunkunubi/spaget/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/oem_ansi_fullsize/rules.mk b/keyboards/handwired/oem_ansi_fullsize/rules.mk index 21e5264dad..98abc35b8d 100644 --- a/keyboards/handwired/oem_ansi_fullsize/rules.mk +++ b/keyboards/handwired/oem_ansi_fullsize/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = halfkay # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/oem_iso_fullsize/rules.mk b/keyboards/handwired/oem_iso_fullsize/rules.mk index 09cade29c5..31a0939279 100644 --- a/keyboards/handwired/oem_iso_fullsize/rules.mk +++ b/keyboards/handwired/oem_iso_fullsize/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/handwired/p65rgb/rules.mk b/keyboards/handwired/p65rgb/rules.mk index 7531a0b83d..1249610b16 100644 --- a/keyboards/handwired/p65rgb/rules.mk +++ b/keyboards/handwired/p65rgb/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = qmk-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/postageboard/mini/rules.mk b/keyboards/handwired/postageboard/mini/rules.mk index fcd3ad04ce..af32703eb2 100644 --- a/keyboards/handwired/postageboard/mini/rules.mk +++ b/keyboards/handwired/postageboard/mini/rules.mk @@ -4,7 +4,7 @@ MCU = atmega32u4 # Bootloader selection BOOTLOADER = atmel-dfu -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/handwired/postageboard/r1/rules.mk b/keyboards/handwired/postageboard/r1/rules.mk index fcd3ad04ce..af32703eb2 100644 --- a/keyboards/handwired/postageboard/r1/rules.mk +++ b/keyboards/handwired/postageboard/r1/rules.mk @@ -4,7 +4,7 @@ MCU = atmega32u4 # Bootloader selection BOOTLOADER = atmel-dfu -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/handwired/prkl30/feather/rules.mk b/keyboards/handwired/prkl30/feather/rules.mk index df2aa7f1db..e99f16c279 100644 --- a/keyboards/handwired/prkl30/feather/rules.mk +++ b/keyboards/handwired/prkl30/feather/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite ENCODER_ENABLE = yes MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = no # Audio control and System control diff --git a/keyboards/handwired/retro_refit/rules.mk b/keyboards/handwired/retro_refit/rules.mk index d06879ab13..06be0c52ef 100644 --- a/keyboards/handwired/retro_refit/rules.mk +++ b/keyboards/handwired/retro_refit/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = halfkay # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/handwired/riblee_f401/rules.mk b/keyboards/handwired/riblee_f401/rules.mk index 60dc969717..4ba8fd3888 100644 --- a/keyboards/handwired/riblee_f401/rules.mk +++ b/keyboards/handwired/riblee_f401/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control KEYBOARD_SHARED_EP = yes diff --git a/keyboards/handwired/riblee_f411/rules.mk b/keyboards/handwired/riblee_f411/rules.mk index 15fcab7322..02c668388d 100644 --- a/keyboards/handwired/riblee_f411/rules.mk +++ b/keyboards/handwired/riblee_f411/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control KEYBOARD_SHARED_EP = yes diff --git a/keyboards/handwired/selene/rules.mk b/keyboards/handwired/selene/rules.mk index d95ac7686e..1c3d398681 100644 --- a/keyboards/handwired/selene/rules.mk +++ b/keyboards/handwired/selene/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/handwired/sick_pad/rules.mk b/keyboards/handwired/sick_pad/rules.mk index 6dc3b099d3..68cbe90aee 100644 --- a/keyboards/handwired/sick_pad/rules.mk +++ b/keyboards/handwired/sick_pad/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = no # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/sono1/rules.mk b/keyboards/handwired/sono1/rules.mk index 6b0b75461c..5a0df50158 100644 --- a/keyboards/handwired/sono1/rules.mk +++ b/keyboards/handwired/sono1/rules.mk @@ -10,7 +10,7 @@ OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/handwired/space_oddity/rules.mk b/keyboards/handwired/space_oddity/rules.mk index 1edf4bf18d..5af57fec5c 100644 --- a/keyboards/handwired/space_oddity/rules.mk +++ b/keyboards/handwired/space_oddity/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/split89/rules.mk b/keyboards/handwired/split89/rules.mk index 4d39af4d29..0ce4c12edd 100644 --- a/keyboards/handwired/split89/rules.mk +++ b/keyboards/handwired/split89/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/stream_cheap/2x3/rules.mk b/keyboards/handwired/stream_cheap/2x3/rules.mk index 6e891c6b80..5d1187508f 100644 --- a/keyboards/handwired/stream_cheap/2x3/rules.mk +++ b/keyboards/handwired/stream_cheap/2x3/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/stream_cheap/2x4/rules.mk b/keyboards/handwired/stream_cheap/2x4/rules.mk index ce670b942b..08aa4ed7b0 100644 --- a/keyboards/handwired/stream_cheap/2x4/rules.mk +++ b/keyboards/handwired/stream_cheap/2x4/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/stream_cheap/2x5/rules.mk b/keyboards/handwired/stream_cheap/2x5/rules.mk index 4411195da2..9578124554 100644 --- a/keyboards/handwired/stream_cheap/2x5/rules.mk +++ b/keyboards/handwired/stream_cheap/2x5/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/swiftrax/astro65/rules.mk b/keyboards/handwired/swiftrax/astro65/rules.mk index a94b847713..9158203a31 100644 --- a/keyboards/handwired/swiftrax/astro65/rules.mk +++ b/keyboards/handwired/swiftrax/astro65/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/swiftrax/bebol/rules.mk b/keyboards/handwired/swiftrax/bebol/rules.mk index c79f74e34b..9906266f48 100644 --- a/keyboards/handwired/swiftrax/bebol/rules.mk +++ b/keyboards/handwired/swiftrax/bebol/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/swiftrax/beegboy/rules.mk b/keyboards/handwired/swiftrax/beegboy/rules.mk index 2fce58dcb1..6b2dc178e8 100644 --- a/keyboards/handwired/swiftrax/beegboy/rules.mk +++ b/keyboards/handwired/swiftrax/beegboy/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/swiftrax/cowfish/rules.mk b/keyboards/handwired/swiftrax/cowfish/rules.mk index f2e5379ac1..3105d59b77 100644 --- a/keyboards/handwired/swiftrax/cowfish/rules.mk +++ b/keyboards/handwired/swiftrax/cowfish/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/swiftrax/equator/rules.mk b/keyboards/handwired/swiftrax/equator/rules.mk index c79f74e34b..9906266f48 100644 --- a/keyboards/handwired/swiftrax/equator/rules.mk +++ b/keyboards/handwired/swiftrax/equator/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/swiftrax/joypad/rules.mk b/keyboards/handwired/swiftrax/joypad/rules.mk index f8b44804b4..6b3745a8b7 100644 --- a/keyboards/handwired/swiftrax/joypad/rules.mk +++ b/keyboards/handwired/swiftrax/joypad/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/swiftrax/koalafications/rules.mk b/keyboards/handwired/swiftrax/koalafications/rules.mk index e5ec31773b..a1f5aee483 100644 --- a/keyboards/handwired/swiftrax/koalafications/rules.mk +++ b/keyboards/handwired/swiftrax/koalafications/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/swiftrax/nodu/rules.mk b/keyboards/handwired/swiftrax/nodu/rules.mk index 6f6414868c..df27d80139 100644 --- a/keyboards/handwired/swiftrax/nodu/rules.mk +++ b/keyboards/handwired/swiftrax/nodu/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/swiftrax/pandamic/rules.mk b/keyboards/handwired/swiftrax/pandamic/rules.mk index fb6776b955..4c48ed51f4 100644 --- a/keyboards/handwired/swiftrax/pandamic/rules.mk +++ b/keyboards/handwired/swiftrax/pandamic/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/swiftrax/the_galleon/rules.mk b/keyboards/handwired/swiftrax/the_galleon/rules.mk index 5de32a5741..378c644afc 100644 --- a/keyboards/handwired/swiftrax/the_galleon/rules.mk +++ b/keyboards/handwired/swiftrax/the_galleon/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/swiftrax/unsplit/rules.mk b/keyboards/handwired/swiftrax/unsplit/rules.mk index 14a25c7b03..7ea82008aa 100644 --- a/keyboards/handwired/swiftrax/unsplit/rules.mk +++ b/keyboards/handwired/swiftrax/unsplit/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/swiftrax/walter/rules.mk b/keyboards/handwired/swiftrax/walter/rules.mk index 6bce0a2f7f..34d93c52cb 100644 --- a/keyboards/handwired/swiftrax/walter/rules.mk +++ b/keyboards/handwired/swiftrax/walter/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/symmetric70_proto/promicro/rules.mk b/keyboards/handwired/symmetric70_proto/promicro/rules.mk index 5760d293d7..22b7376b94 100644 --- a/keyboards/handwired/symmetric70_proto/promicro/rules.mk +++ b/keyboards/handwired/symmetric70_proto/promicro/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = no # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/symmetric70_proto/proton_c/rules.mk b/keyboards/handwired/symmetric70_proto/proton_c/rules.mk index f1cda00f20..8b19f79b3b 100644 --- a/keyboards/handwired/symmetric70_proto/proton_c/rules.mk +++ b/keyboards/handwired/symmetric70_proto/proton_c/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = no # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/symmetry60/rules.mk b/keyboards/handwired/symmetry60/rules.mk index adfa79ad37..8304e18ae7 100644 --- a/keyboards/handwired/symmetry60/rules.mk +++ b/keyboards/handwired/symmetry60/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/handwired/t111/rules.mk b/keyboards/handwired/t111/rules.mk index 6b0b75461c..5a0df50158 100644 --- a/keyboards/handwired/t111/rules.mk +++ b/keyboards/handwired/t111/rules.mk @@ -10,7 +10,7 @@ OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/handwired/tennie/rules.mk b/keyboards/handwired/tennie/rules.mk index 97c3db2a41..254ec54a32 100644 --- a/keyboards/handwired/tennie/rules.mk +++ b/keyboards/handwired/tennie/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/tractyl_manuform/4x6_right/rules.mk b/keyboards/handwired/tractyl_manuform/4x6_right/rules.mk index 6eb48c3460..c80cf8929d 100644 --- a/keyboards/handwired/tractyl_manuform/4x6_right/rules.mk +++ b/keyboards/handwired/tractyl_manuform/4x6_right/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/rules.mk b/keyboards/handwired/tractyl_manuform/5x6_right/rules.mk index 4109a3b82c..c9bc2dbb99 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/rules.mk +++ b/keyboards/handwired/tractyl_manuform/5x6_right/rules.mk @@ -1,7 +1,7 @@ # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/tritium_numpad/rules.mk b/keyboards/handwired/tritium_numpad/rules.mk index 82dcfd94c0..51d9e849de 100644 --- a/keyboards/handwired/tritium_numpad/rules.mk +++ b/keyboards/handwired/tritium_numpad/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/handwired/videowriter/rules.mk b/keyboards/handwired/videowriter/rules.mk index 3e8ae9050c..f4059cc842 100644 --- a/keyboards/handwired/videowriter/rules.mk +++ b/keyboards/handwired/videowriter/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/wabi/rules.mk b/keyboards/handwired/wabi/rules.mk index b2a59cad16..6c849c7d1e 100644 --- a/keyboards/handwired/wabi/rules.mk +++ b/keyboards/handwired/wabi/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/handwired/wulkan/rules.mk b/keyboards/handwired/wulkan/rules.mk index 85ad2b12d7..8aa1554fd4 100644 --- a/keyboards/handwired/wulkan/rules.mk +++ b/keyboards/handwired/wulkan/rules.mk @@ -9,7 +9,7 @@ BOOTLOADER = stm32-dfu # comment out to disable the options. # BACKLIGHT_ENABLE = no -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/xealousbrown/rules.mk b/keyboards/handwired/xealousbrown/rules.mk index f8c404f049..67b91e6193 100644 --- a/keyboards/handwired/xealousbrown/rules.mk +++ b/keyboards/handwired/xealousbrown/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/handwired/z150/rules.mk b/keyboards/handwired/z150/rules.mk index 345dc6ffbc..f071a8be8c 100644 --- a/keyboards/handwired/z150/rules.mk +++ b/keyboards/handwired/z150/rules.mk @@ -10,7 +10,7 @@ OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/handwired/zergo/rules.mk b/keyboards/handwired/zergo/rules.mk index 9ce0f1a3df..85646a5e48 100644 --- a/keyboards/handwired/zergo/rules.mk +++ b/keyboards/handwired/zergo/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = halfkay # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = no # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/hardlineworks/otd_plus/rules.mk b/keyboards/hardlineworks/otd_plus/rules.mk index bba6cf37cd..988e01862a 100644 --- a/keyboards/hardlineworks/otd_plus/rules.mk +++ b/keyboards/hardlineworks/otd_plus/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/hecomi/rules.mk b/keyboards/hecomi/rules.mk index 331aaf21a2..7ceb58dcd4 100644 --- a/keyboards/hecomi/rules.mk +++ b/keyboards/hecomi/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/hhkb/ansi/rules.mk b/keyboards/hhkb/ansi/rules.mk index 71e8198b4a..d9a69a5e38 100644 --- a/keyboards/hhkb/ansi/rules.mk +++ b/keyboards/hhkb/ansi/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/hhkb/jp/rules.mk b/keyboards/hhkb/jp/rules.mk index 8eb11940b3..f197cd9eef 100644 --- a/keyboards/hhkb/jp/rules.mk +++ b/keyboards/hhkb/jp/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/hhkb_lite_2/rules.mk b/keyboards/hhkb_lite_2/rules.mk index ce37a63a78..951db8a1e9 100644 --- a/keyboards/hhkb_lite_2/rules.mk +++ b/keyboards/hhkb_lite_2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = halfkay # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/hid_liber/keymaps/bakageta/rules.mk b/keyboards/hid_liber/keymaps/bakageta/rules.mk index 8cb28dd5df..b1530f614f 100755 --- a/keyboards/hid_liber/keymaps/bakageta/rules.mk +++ b/keyboards/hid_liber/keymaps/bakageta/rules.mk @@ -18,7 +18,7 @@ # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = yes # Console for debug(+400) diff --git a/keyboards/hid_liber/rules.mk b/keyboards/hid_liber/rules.mk index 4e43eccc60..ecd04298c9 100755 --- a/keyboards/hid_liber/rules.mk +++ b/keyboards/hid_liber/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/hidtech/bastyl/rules.mk b/keyboards/hidtech/bastyl/rules.mk index 4b9b97c3e3..aeb183666e 100644 --- a/keyboards/hidtech/bastyl/rules.mk +++ b/keyboards/hidtech/bastyl/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/hineybush/h10/rules.mk b/keyboards/hineybush/h10/rules.mk index 9917fd89cc..d46c6dcc6d 100644 --- a/keyboards/hineybush/h10/rules.mk +++ b/keyboards/hineybush/h10/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/hineybush/h60/rules.mk b/keyboards/hineybush/h60/rules.mk index f7deac469a..f2513c9752 100644 --- a/keyboards/hineybush/h60/rules.mk +++ b/keyboards/hineybush/h60/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/hineybush/h660s/rules.mk b/keyboards/hineybush/h660s/rules.mk index f9f5ed5504..1d0782a2ee 100644 --- a/keyboards/hineybush/h660s/rules.mk +++ b/keyboards/hineybush/h660s/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/hineybush/h75_singa/rules.mk b/keyboards/hineybush/h75_singa/rules.mk index cc13d0c39b..76590c14a5 100644 --- a/keyboards/hineybush/h75_singa/rules.mk +++ b/keyboards/hineybush/h75_singa/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/hineybush/h87a/rules.mk b/keyboards/hineybush/h87a/rules.mk index 7bdbf25ef8..75a1312273 100644 --- a/keyboards/hineybush/h87a/rules.mk +++ b/keyboards/hineybush/h87a/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/hineybush/h88/rules.mk b/keyboards/hineybush/h88/rules.mk index f540927f10..d3ee3fd1c6 100644 --- a/keyboards/hineybush/h88/rules.mk +++ b/keyboards/hineybush/h88/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/hineybush/hbcp/rules.mk b/keyboards/hineybush/hbcp/rules.mk index 0ff3c76a5b..af9655c57a 100644 --- a/keyboards/hineybush/hbcp/rules.mk +++ b/keyboards/hineybush/hbcp/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/hineybush/physix/rules.mk b/keyboards/hineybush/physix/rules.mk index fb97faa5f0..0d9012c70b 100644 --- a/keyboards/hineybush/physix/rules.mk +++ b/keyboards/hineybush/physix/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/hineybush/sm68/rules.mk b/keyboards/hineybush/sm68/rules.mk index 1417fbe14a..1ef41c30ce 100644 --- a/keyboards/hineybush/sm68/rules.mk +++ b/keyboards/hineybush/sm68/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/holyswitch/southpaw75/rules.mk b/keyboards/holyswitch/southpaw75/rules.mk index c79f74e34b..9906266f48 100644 --- a/keyboards/holyswitch/southpaw75/rules.mk +++ b/keyboards/holyswitch/southpaw75/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/hotdox/rules.mk b/keyboards/hotdox/rules.mk index 6caa17fab6..dbfc855ccb 100644 --- a/keyboards/hotdox/rules.mk +++ b/keyboards/hotdox/rules.mk @@ -9,7 +9,7 @@ BOOTLOADER = atmel-dfu # CUSTOM_MATRIX = yes # Custom matrix file for the ErgoDone UNICODE_ENABLE = yes # Unicode -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/hp69/rules.mk b/keyboards/hp69/rules.mk index 4206aaf882..f66979ae5f 100644 --- a/keyboards/hp69/rules.mk +++ b/keyboards/hp69/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/hs60/v2/ansi/rules.mk b/keyboards/hs60/v2/ansi/rules.mk index d0b7d2df4c..5aef811dc0 100644 --- a/keyboards/hs60/v2/ansi/rules.mk +++ b/keyboards/hs60/v2/ansi/rules.mk @@ -14,7 +14,7 @@ OPT_DEFS += -DNO_SUSPEND_POWER_DOWN # comment out to disable the options. # BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/hs60/v2/hhkb/rules.mk b/keyboards/hs60/v2/hhkb/rules.mk index ea83aa454e..60d8385f42 100644 --- a/keyboards/hs60/v2/hhkb/rules.mk +++ b/keyboards/hs60/v2/hhkb/rules.mk @@ -14,7 +14,7 @@ OPT_DEFS += -DNO_SUSPEND_POWER_DOWN # comment out to disable the options. # BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/hs60/v2/iso/rules.mk b/keyboards/hs60/v2/iso/rules.mk index a25ff59a8b..6cfe2dacec 100644 --- a/keyboards/hs60/v2/iso/rules.mk +++ b/keyboards/hs60/v2/iso/rules.mk @@ -14,7 +14,7 @@ OPT_DEFS += -DNO_SUSPEND_POWER_DOWN # comment out to disable the options. # BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/hub16/keymaps/peepeetee/rules.mk b/keyboards/hub16/keymaps/peepeetee/rules.mk index 976443cf48..f6737b8e4a 100644 --- a/keyboards/hub16/keymaps/peepeetee/rules.mk +++ b/keyboards/hub16/keymaps/peepeetee/rules.mk @@ -1 +1 @@ -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite \ No newline at end of file +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite \ No newline at end of file diff --git a/keyboards/hub16/rules.mk b/keyboards/hub16/rules.mk index cc5e00b9df..e3b8c7cb69 100755 --- a/keyboards/hub16/rules.mk +++ b/keyboards/hub16/rules.mk @@ -6,7 +6,7 @@ BOOTLOADER = caterina # Build Options CUSTOM_MATRIX = lite # Custom scanning of matrix -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/hub20/rules.mk b/keyboards/hub20/rules.mk index 297ac0a4e4..853f006e0c 100644 --- a/keyboards/hub20/rules.mk +++ b/keyboards/hub20/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ianklug/grooveboard/rules.mk b/keyboards/ianklug/grooveboard/rules.mk index c79f74e34b..9906266f48 100644 --- a/keyboards/ianklug/grooveboard/rules.mk +++ b/keyboards/ianklug/grooveboard/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ibm/model_m_4th_gen/overnumpad_1xb/rules.mk b/keyboards/ibm/model_m_4th_gen/overnumpad_1xb/rules.mk index 7837adcbd3..323a834c53 100644 --- a/keyboards/ibm/model_m_4th_gen/overnumpad_1xb/rules.mk +++ b/keyboards/ibm/model_m_4th_gen/overnumpad_1xb/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = yes # Enter bootloader mode when holding the ESC key. +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/id67/rules.mk b/keyboards/id67/rules.mk index d58ff8f063..bf105353e1 100644 --- a/keyboards/id67/rules.mk +++ b/keyboards/id67/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/id80/rules.mk b/keyboards/id80/rules.mk index 3d810fbd98..7ff53f51f1 100644 --- a/keyboards/id80/rules.mk +++ b/keyboards/id80/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/id87/rules.mk b/keyboards/id87/rules.mk index 6cccaf75a1..21c6980ad4 100644 --- a/keyboards/id87/rules.mk +++ b/keyboards/id87/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/idb/idb_60/rules.mk b/keyboards/idb/idb_60/rules.mk index a2363cbb5e..47102bc8e1 100644 --- a/keyboards/idb/idb_60/rules.mk +++ b/keyboards/idb/idb_60/rules.mk @@ -6,7 +6,7 @@ BOOTLOADER = atmel-dfu # Build Options # Comment out to disable the options. -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/illuminati/is0/rules.mk b/keyboards/illuminati/is0/rules.mk index be4a048405..7d36ae3c45 100644 --- a/keyboards/illuminati/is0/rules.mk +++ b/keyboards/illuminati/is0/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/illusion/rosa/rules.mk b/keyboards/illusion/rosa/rules.mk index 8f499c08b1..95a41885b1 100644 --- a/keyboards/illusion/rosa/rules.mk +++ b/keyboards/illusion/rosa/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ilumkb/primus75/rules.mk b/keyboards/ilumkb/primus75/rules.mk index dc7d341bbb..5f180ae00d 100644 --- a/keyboards/ilumkb/primus75/rules.mk +++ b/keyboards/ilumkb/primus75/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ilumkb/volcano660/rules.mk b/keyboards/ilumkb/volcano660/rules.mk index 208933ce9e..5f180ae00d 100644 --- a/keyboards/ilumkb/volcano660/rules.mk +++ b/keyboards/ilumkb/volcano660/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/inett_studio/sqx/hotswap/rules.mk b/keyboards/inett_studio/sqx/hotswap/rules.mk index 84de4cda9b..6f3514ea12 100644 --- a/keyboards/inett_studio/sqx/hotswap/rules.mk +++ b/keyboards/inett_studio/sqx/hotswap/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/inett_studio/sqx/universal/rules.mk b/keyboards/inett_studio/sqx/universal/rules.mk index e2065f6c70..ee6d6367f0 100644 --- a/keyboards/inett_studio/sqx/universal/rules.mk +++ b/keyboards/inett_studio/sqx/universal/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/irene/rules.mk b/keyboards/irene/rules.mk index 8780333d2f..33e1763375 100644 --- a/keyboards/irene/rules.mk +++ b/keyboards/irene/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/iriskeyboards/rules.mk b/keyboards/iriskeyboards/rules.mk index c79f74e34b..9906266f48 100644 --- a/keyboards/iriskeyboards/rules.mk +++ b/keyboards/iriskeyboards/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/iron180/rules.mk b/keyboards/iron180/rules.mk index 755125c797..ee6c0dfca7 100644 --- a/keyboards/iron180/rules.mk +++ b/keyboards/iron180/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/j80/rules.mk b/keyboards/j80/rules.mk index 75443bf094..370a9913df 100644 --- a/keyboards/j80/rules.mk +++ b/keyboards/j80/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = bootloadhid # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/jacky_studio/bear_65/rules.mk b/keyboards/jacky_studio/bear_65/rules.mk index 9473c17bbe..aebfff7a01 100644 --- a/keyboards/jacky_studio/bear_65/rules.mk +++ b/keyboards/jacky_studio/bear_65/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/jacky_studio/s7_elephant/rev2/rules.mk b/keyboards/jacky_studio/s7_elephant/rev2/rules.mk index e81dca4b85..16501de0ae 100644 --- a/keyboards/jacky_studio/s7_elephant/rev2/rules.mk +++ b/keyboards/jacky_studio/s7_elephant/rev2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/jae/j01/rules.mk b/keyboards/jae/j01/rules.mk index 6785f2fb50..0b23d7cb96 100644 --- a/keyboards/jae/j01/rules.mk +++ b/keyboards/jae/j01/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/jagdpietr/drakon/rules.mk b/keyboards/jagdpietr/drakon/rules.mk index d7e63ebf2d..85a762c68b 100644 --- a/keyboards/jagdpietr/drakon/rules.mk +++ b/keyboards/jagdpietr/drakon/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/jc65/v32a/rules.mk b/keyboards/jc65/v32a/rules.mk index af36151ccc..694ad609a2 100644 --- a/keyboards/jc65/v32a/rules.mk +++ b/keyboards/jc65/v32a/rules.mk @@ -5,7 +5,7 @@ MCU = atmega32a BOOTLOADER = bootloadhid # build options -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no EXTRAKEY_ENABLE = yes CONSOLE_ENABLE = no diff --git a/keyboards/jd40/rules.mk b/keyboards/jd40/rules.mk index f344e4fc77..10cefa36c5 100644 --- a/keyboards/jd40/rules.mk +++ b/keyboards/jd40/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control # CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/jd45/rules.mk b/keyboards/jd45/rules.mk index 3947008ca4..4e856aa50f 100644 --- a/keyboards/jd45/rules.mk +++ b/keyboards/jd45/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/jisplit89/rules.mk b/keyboards/jisplit89/rules.mk index db807b5b43..3f78c5cce5 100644 --- a/keyboards/jisplit89/rules.mk +++ b/keyboards/jisplit89/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/jkdlab/binary_monkey/rules.mk b/keyboards/jkdlab/binary_monkey/rules.mk index f2e5379ac1..3105d59b77 100644 --- a/keyboards/jkdlab/binary_monkey/rules.mk +++ b/keyboards/jkdlab/binary_monkey/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/jm60/rules.mk b/keyboards/jm60/rules.mk index 761e04c55d..d2684a21d7 100644 --- a/keyboards/jm60/rules.mk +++ b/keyboards/jm60/rules.mk @@ -7,7 +7,7 @@ BOARD = ST_NUCLEO64_F103RB # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/just60/rules.mk b/keyboards/just60/rules.mk index 8b3d718089..a2d0c06a5d 100644 --- a/keyboards/just60/rules.mk +++ b/keyboards/just60/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = lufa-ms # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = no # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kabedon/kabedon78s/rules.mk b/keyboards/kabedon/kabedon78s/rules.mk index 25f6224242..a580bc2077 100644 --- a/keyboards/kabedon/kabedon78s/rules.mk +++ b/keyboards/kabedon/kabedon78s/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kabedon/kabedon980/rules.mk b/keyboards/kabedon/kabedon980/rules.mk index 25f6224242..a580bc2077 100644 --- a/keyboards/kabedon/kabedon980/rules.mk +++ b/keyboards/kabedon/kabedon980/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kabedon/kabedon98e/rules.mk b/keyboards/kabedon/kabedon98e/rules.mk index f9259d1470..e93f7b4b92 100644 --- a/keyboards/kabedon/kabedon98e/rules.mk +++ b/keyboards/kabedon/kabedon98e/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32duino # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kapcave/gskt00/rules.mk b/keyboards/kapcave/gskt00/rules.mk index 0c803ec2e2..4766062779 100755 --- a/keyboards/kapcave/gskt00/rules.mk +++ b/keyboards/kapcave/gskt00/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/kb_elmo/67mk_e/rules.mk b/keyboards/kb_elmo/67mk_e/rules.mk index 51f9c5d76a..68c8a17ca8 100644 --- a/keyboards/kb_elmo/67mk_e/rules.mk +++ b/keyboards/kb_elmo/67mk_e/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kb_elmo/aek2_usb/rules.mk b/keyboards/kb_elmo/aek2_usb/rules.mk index c052c9c180..c11958500e 100644 --- a/keyboards/kb_elmo/aek2_usb/rules.mk +++ b/keyboards/kb_elmo/aek2_usb/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = usbasploader # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kb_elmo/elmopad/rules.mk b/keyboards/kb_elmo/elmopad/rules.mk index 8ab5bdb722..3f57446238 100644 --- a/keyboards/kb_elmo/elmopad/rules.mk +++ b/keyboards/kb_elmo/elmopad/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = usbasploader # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kb_elmo/m0110a_usb/rules.mk b/keyboards/kb_elmo/m0110a_usb/rules.mk index c052c9c180..c11958500e 100644 --- a/keyboards/kb_elmo/m0110a_usb/rules.mk +++ b/keyboards/kb_elmo/m0110a_usb/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = usbasploader # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kb_elmo/m0116_usb/rules.mk b/keyboards/kb_elmo/m0116_usb/rules.mk index c052c9c180..c11958500e 100644 --- a/keyboards/kb_elmo/m0116_usb/rules.mk +++ b/keyboards/kb_elmo/m0116_usb/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = usbasploader # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kb_elmo/noah_avr/rules.mk b/keyboards/kb_elmo/noah_avr/rules.mk index e189163485..9610473b49 100644 --- a/keyboards/kb_elmo/noah_avr/rules.mk +++ b/keyboards/kb_elmo/noah_avr/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kb_elmo/qez/rules.mk b/keyboards/kb_elmo/qez/rules.mk index 4ed330a33e..895a77853d 100644 --- a/keyboards/kb_elmo/qez/rules.mk +++ b/keyboards/kb_elmo/qez/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kb_elmo/sesame/rules.mk b/keyboards/kb_elmo/sesame/rules.mk index 6d46a1592e..83a923c8e3 100644 --- a/keyboards/kb_elmo/sesame/rules.mk +++ b/keyboards/kb_elmo/sesame/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = usbasploader # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kb_elmo/twelvekey/rules.mk b/keyboards/kb_elmo/twelvekey/rules.mk index 432119a0d2..07857f30fe 100644 --- a/keyboards/kb_elmo/twelvekey/rules.mk +++ b/keyboards/kb_elmo/twelvekey/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = usbasploader # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kbdfans/bella/rgb/rules.mk b/keyboards/kbdfans/bella/rgb/rules.mk index c177226738..c75e7259b6 100644 --- a/keyboards/kbdfans/bella/rgb/rules.mk +++ b/keyboards/kbdfans/bella/rgb/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kbdfans/bella/rgb_iso/rules.mk b/keyboards/kbdfans/bella/rgb_iso/rules.mk index c177226738..c75e7259b6 100644 --- a/keyboards/kbdfans/bella/rgb_iso/rules.mk +++ b/keyboards/kbdfans/bella/rgb_iso/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kbdfans/bella/soldered/rules.mk b/keyboards/kbdfans/bella/soldered/rules.mk index dc7d341bbb..5f180ae00d 100755 --- a/keyboards/kbdfans/bella/soldered/rules.mk +++ b/keyboards/kbdfans/bella/soldered/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kbdfans/kbd19x/rules.mk b/keyboards/kbdfans/kbd19x/rules.mk index fcc43a2f73..1709fdacac 100644 --- a/keyboards/kbdfans/kbd19x/rules.mk +++ b/keyboards/kbdfans/kbd19x/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kbdfans/kbd4x/rules.mk b/keyboards/kbdfans/kbd4x/rules.mk index 2042fdeeb1..39d6609b69 100644 --- a/keyboards/kbdfans/kbd4x/rules.mk +++ b/keyboards/kbdfans/kbd4x/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kbdfans/kbd66/rules.mk b/keyboards/kbdfans/kbd66/rules.mk index 4fac790d66..f18d097b0d 100644 --- a/keyboards/kbdfans/kbd66/rules.mk +++ b/keyboards/kbdfans/kbd66/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/kbdfans/kbd67/hotswap/keymaps/brandonschlack/rules.mk b/keyboards/kbdfans/kbd67/hotswap/keymaps/brandonschlack/rules.mk index 98bf07960e..673e15f81f 100644 --- a/keyboards/kbdfans/kbd67/hotswap/keymaps/brandonschlack/rules.mk +++ b/keyboards/kbdfans/kbd67/hotswap/keymaps/brandonschlack/rules.mk @@ -1,2 +1,2 @@ # Build Options -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite diff --git a/keyboards/kbdfans/kbd67/hotswap/rules.mk b/keyboards/kbdfans/kbd67/hotswap/rules.mk index f8c1fa3bfd..0120a454be 100644 --- a/keyboards/kbdfans/kbd67/hotswap/rules.mk +++ b/keyboards/kbdfans/kbd67/hotswap/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/kbdfans/kbd67/mkii_soldered/rules.mk b/keyboards/kbdfans/kbd67/mkii_soldered/rules.mk index daaaa8a531..704af71c72 100644 --- a/keyboards/kbdfans/kbd67/mkii_soldered/rules.mk +++ b/keyboards/kbdfans/kbd67/mkii_soldered/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kbdfans/kbd67/mkiirgb/v1/rules.mk b/keyboards/kbdfans/kbd67/mkiirgb/v1/rules.mk index e7c5b37800..85c3db9e29 100644 --- a/keyboards/kbdfans/kbd67/mkiirgb/v1/rules.mk +++ b/keyboards/kbdfans/kbd67/mkiirgb/v1/rules.mk @@ -6,7 +6,7 @@ BOARD = QMK_PROTON_C BOOTLOADER = stm32-dfu BACKLIGHT_ENABLE = no -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kbdfans/kbd67/mkiirgb/v2/rules.mk b/keyboards/kbdfans/kbd67/mkiirgb/v2/rules.mk index ff4aa2ceec..f3862be339 100644 --- a/keyboards/kbdfans/kbd67/mkiirgb/v2/rules.mk +++ b/keyboards/kbdfans/kbd67/mkiirgb/v2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kbdfans/kbd67/mkiirgb/v3/rules.mk b/keyboards/kbdfans/kbd67/mkiirgb/v3/rules.mk index 374757ff63..ad6af52f43 100755 --- a/keyboards/kbdfans/kbd67/mkiirgb/v3/rules.mk +++ b/keyboards/kbdfans/kbd67/mkiirgb/v3/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER_SIZE = 6144 # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kbdfans/kbd67/rev1/rules.mk b/keyboards/kbdfans/kbd67/rev1/rules.mk index e2fc5657eb..610532fe9f 100644 --- a/keyboards/kbdfans/kbd67/rev1/rules.mk +++ b/keyboards/kbdfans/kbd67/rev1/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/kbdfans/kbd67/rev2/keymaps/tucznak/rules.mk b/keyboards/kbdfans/kbd67/rev2/keymaps/tucznak/rules.mk index 3031077b99..3635874b4e 100644 --- a/keyboards/kbdfans/kbd67/rev2/keymaps/tucznak/rules.mk +++ b/keyboards/kbdfans/kbd67/rev2/keymaps/tucznak/rules.mk @@ -1,7 +1,7 @@ # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = no # Console for debug(+400) diff --git a/keyboards/kbdfans/kbd67/rev2/rules.mk b/keyboards/kbdfans/kbd67/rev2/rules.mk index 0d6de1dd93..332aa9e9ef 100644 --- a/keyboards/kbdfans/kbd67/rev2/rules.mk +++ b/keyboards/kbdfans/kbd67/rev2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kbdfans/kbd6x/keymaps/konstantin/rules.mk b/keyboards/kbdfans/kbd6x/keymaps/konstantin/rules.mk index cff02d7c5b..9ce299ed68 100644 --- a/keyboards/kbdfans/kbd6x/keymaps/konstantin/rules.mk +++ b/keyboards/kbdfans/kbd6x/keymaps/konstantin/rules.mk @@ -1,5 +1,5 @@ # Generic features -BOOTMAGIC_ENABLE = yes +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite COMMAND_ENABLE = yes CONSOLE_ENABLE = yes EXTRAKEY_ENABLE = yes diff --git a/keyboards/kbdfans/kbd6x/rules.mk b/keyboards/kbdfans/kbd6x/rules.mk index d2afc9fd2b..14adc28f7e 100644 --- a/keyboards/kbdfans/kbd6x/rules.mk +++ b/keyboards/kbdfans/kbd6x/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/kbdfans/kbd75/keymaps/noroadsleft/rules.mk b/keyboards/kbdfans/kbd75/keymaps/noroadsleft/rules.mk index 87373812c9..a351eb91ba 100644 --- a/keyboards/kbdfans/kbd75/keymaps/noroadsleft/rules.mk +++ b/keyboards/kbdfans/kbd75/keymaps/noroadsleft/rules.mk @@ -1,4 +1,4 @@ -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite CONSOLE_ENABLE = yes TAP_DANCE_ENABLE = yes diff --git a/keyboards/kbdfans/kbd75/keymaps/tucznak/rules.mk b/keyboards/kbdfans/kbd75/keymaps/tucznak/rules.mk index 77bc0e2b0c..71b25fcb12 100644 --- a/keyboards/kbdfans/kbd75/keymaps/tucznak/rules.mk +++ b/keyboards/kbdfans/kbd75/keymaps/tucznak/rules.mk @@ -1,7 +1,7 @@ # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = no # Console for debug(+400) diff --git a/keyboards/kbdfans/kbd75/rev1/rules.mk b/keyboards/kbdfans/kbd75/rev1/rules.mk index a1ef4dbd85..24f717ea97 100644 --- a/keyboards/kbdfans/kbd75/rev1/rules.mk +++ b/keyboards/kbdfans/kbd75/rev1/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kbdfans/kbd75/rev2/rules.mk b/keyboards/kbdfans/kbd75/rev2/rules.mk index a1ef4dbd85..24f717ea97 100644 --- a/keyboards/kbdfans/kbd75/rev2/rules.mk +++ b/keyboards/kbdfans/kbd75/rev2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kbdfans/kbd8x_mk2/rules.mk b/keyboards/kbdfans/kbd8x_mk2/rules.mk index da5b3c646e..9a9eaad646 100644 --- a/keyboards/kbdfans/kbd8x_mk2/rules.mk +++ b/keyboards/kbdfans/kbd8x_mk2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kbdfans/kbdmini/rules.mk b/keyboards/kbdfans/kbdmini/rules.mk index 2d151d2214..0bcd9e7267 100644 --- a/keyboards/kbdfans/kbdmini/rules.mk +++ b/keyboards/kbdfans/kbdmini/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kbdfans/kbdpad_mk2/rules.mk b/keyboards/kbdfans/kbdpad_mk2/rules.mk index 374998b0ef..1b5b44b80d 100644 --- a/keyboards/kbdfans/kbdpad_mk2/rules.mk +++ b/keyboards/kbdfans/kbdpad_mk2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kbdfans/maja/rules.mk b/keyboards/kbdfans/maja/rules.mk index 6060aebcd5..2279a82333 100755 --- a/keyboards/kbdfans/maja/rules.mk +++ b/keyboards/kbdfans/maja/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kbdfans/maja_soldered/rules.mk b/keyboards/kbdfans/maja_soldered/rules.mk index dda55e389c..59fdeaebf4 100755 --- a/keyboards/kbdfans/maja_soldered/rules.mk +++ b/keyboards/kbdfans/maja_soldered/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kc60/keymaps/stanleylai/rules.mk b/keyboards/kc60/keymaps/stanleylai/rules.mk index 3951663c7c..9816b082fd 100644 --- a/keyboards/kc60/keymaps/stanleylai/rules.mk +++ b/keyboards/kc60/keymaps/stanleylai/rules.mk @@ -3,7 +3,7 @@ # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = no # Console for debug(+400) diff --git a/keyboards/kc60/keymaps/wigguno/rules.mk b/keyboards/kc60/keymaps/wigguno/rules.mk index 97ab961739..f9b4b86766 100644 --- a/keyboards/kc60/keymaps/wigguno/rules.mk +++ b/keyboards/kc60/keymaps/wigguno/rules.mk @@ -3,7 +3,7 @@ # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = no # Console for debug(+400) diff --git a/keyboards/kc60/rules.mk b/keyboards/kc60/rules.mk index a00cd5e808..89823d4349 100644 --- a/keyboards/kc60/rules.mk +++ b/keyboards/kc60/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/kc60se/readme.md b/keyboards/kc60se/readme.md index 55583d81db..ba2cab1c76 100644 --- a/keyboards/kc60se/readme.md +++ b/keyboards/kc60se/readme.md @@ -10,13 +10,13 @@ ### Enter the Bootloader - * As delivered, BOOTMAGIC_ENABLE = yes: + * New firmware, with Bootmagic Lite: + * holding down Esc while plugging in USB. + * As delivered, with Full Bootmagic (deprecated): * unplug keyboard; * while holding down 'Space' 'B', plug in USB cable and continue to hold for 8 seconds; * 'lsusb' should report 'Atmel Corp. atmega32u4 DFU bootloader' instead of 'feed 6060'; * in bootloader LEDs are off & keyboard does not work. - * New firmware, BOOTMAGIC_ENABLE = lite: - * holding down esc while pluging in usb. * Hardware way: * momentary jump pads 5 & 6 to enter bootloader; diff --git a/keyboards/kc60se/rules.mk b/keyboards/kc60se/rules.mk index e31f3c994b..9f68499394 100644 --- a/keyboards/kc60se/rules.mk +++ b/keyboards/kc60se/rules.mk @@ -6,7 +6,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # default keymap does not map mouse EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/keebio/bdn9/rev2/rules.mk b/keyboards/keebio/bdn9/rev2/rules.mk index f743e71be5..fd3968a4ec 100644 --- a/keyboards/keebio/bdn9/rev2/rules.mk +++ b/keyboards/keebio/bdn9/rev2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/keebio/choconum/rules.mk b/keyboards/keebio/choconum/rules.mk index bedc563292..087f572ba8 100644 --- a/keyboards/keebio/choconum/rules.mk +++ b/keyboards/keebio/choconum/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/keebio/dilly/rules.mk b/keyboards/keebio/dilly/rules.mk index cc778b3327..09a1a9f711 100644 --- a/keyboards/keebio/dilly/rules.mk +++ b/keyboards/keebio/dilly/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/keebio/dsp40/rev1/rules.mk b/keyboards/keebio/dsp40/rev1/rules.mk index 5117be620e..6208e6b386 100644 --- a/keyboards/keebio/dsp40/rev1/rules.mk +++ b/keyboards/keebio/dsp40/rev1/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/keebio/foldkb/rules.mk b/keyboards/keebio/foldkb/rules.mk index 77f209de95..96e4128903 100644 --- a/keyboards/keebio/foldkb/rules.mk +++ b/keyboards/keebio/foldkb/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/keebio/iris/keymaps/ddone/rules.mk b/keyboards/keebio/iris/keymaps/ddone/rules.mk index f652b45c96..41c4983e49 100644 --- a/keyboards/keebio/iris/keymaps/ddone/rules.mk +++ b/keyboards/keebio/iris/keymaps/ddone/rules.mk @@ -1,4 +1,4 @@ LTO_ENABLE = yes COMMAND_ENABLE = no MOUSEKEY_ENABLE = yes -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite diff --git a/keyboards/keebio/iris/keymaps/vyolle/rules.mk b/keyboards/keebio/iris/keymaps/vyolle/rules.mk index 56073e8b93..3b342b4cef 100644 --- a/keyboards/keebio/iris/keymaps/vyolle/rules.mk +++ b/keyboards/keebio/iris/keymaps/vyolle/rules.mk @@ -4,4 +4,4 @@ STENO_ENABLE = no # Additional protocols for Stenography(+1700), require AUDIO_ENABLE = no # Audio output on port C6 MIDI_ENABLE = no # MIDI controls NKRO_ENABLE = yes -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite diff --git a/keyboards/keebio/kbo5000/rules.mk b/keyboards/keebio/kbo5000/rules.mk index 94f92befe0..1a1c97376b 100644 --- a/keyboards/keebio/kbo5000/rules.mk +++ b/keyboards/keebio/kbo5000/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/keebio/levinson/keymaps/steno/rules.mk b/keyboards/keebio/levinson/keymaps/steno/rules.mk index 18da5e15b4..18c51540bf 100644 --- a/keyboards/keebio/levinson/keymaps/steno/rules.mk +++ b/keyboards/keebio/levinson/keymaps/steno/rules.mk @@ -4,4 +4,4 @@ STENO_ENABLE = yes # Additional protocols for Stenography, requires VIR AUDIO_ENABLE = no # Audio output on port C6 MIDI_ENABLE = no # MIDI controls NKRO_ENABLE = yes -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite diff --git a/keyboards/keebio/nyquist/keymaps/danielhklein/rules.mk b/keyboards/keebio/nyquist/keymaps/danielhklein/rules.mk index f8da5a5f5f..ef7ab04205 100644 --- a/keyboards/keebio/nyquist/keymaps/danielhklein/rules.mk +++ b/keyboards/keebio/nyquist/keymaps/danielhklein/rules.mk @@ -18,7 +18,7 @@ # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = no # Console for debug(+400) diff --git a/keyboards/keebio/quefrency/keymaps/bjohnson/rules.mk b/keyboards/keebio/quefrency/keymaps/bjohnson/rules.mk index ca8d5989ff..63121acd6b 100644 --- a/keyboards/keebio/quefrency/keymaps/bjohnson/rules.mk +++ b/keyboards/keebio/quefrency/keymaps/bjohnson/rules.mk @@ -4,7 +4,7 @@ BOOTLOADER = atmel-dfu # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = no # Console for debug(+400) diff --git a/keyboards/keebio/sinc/rules.mk b/keyboards/keebio/sinc/rules.mk index 7b9f99e1d9..f72b3e9c9e 100644 --- a/keyboards/keebio/sinc/rules.mk +++ b/keyboards/keebio/sinc/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/keebio/stick/rules.mk b/keyboards/keebio/stick/rules.mk index 2d6dc74b58..ba077c5fc7 100644 --- a/keyboards/keebio/stick/rules.mk +++ b/keyboards/keebio/stick/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/keebio/wtf60/rules.mk b/keyboards/keebio/wtf60/rules.mk index 90542c4d26..f92841df1c 100644 --- a/keyboards/keebio/wtf60/rules.mk +++ b/keyboards/keebio/wtf60/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/keebsforall/freebird60/rules.mk b/keyboards/keebsforall/freebird60/rules.mk index c79f74e34b..9906266f48 100644 --- a/keyboards/keebsforall/freebird60/rules.mk +++ b/keyboards/keebsforall/freebird60/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/keebwerk/mega/ansi/rules.mk b/keyboards/keebwerk/mega/ansi/rules.mk index 048142703a..c45a6bec11 100755 --- a/keyboards/keebwerk/mega/ansi/rules.mk +++ b/keyboards/keebwerk/mega/ansi/rules.mk @@ -12,7 +12,7 @@ OPT_DEFS += -DNO_SUSPEND_POWER_DOWN # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/keebwerk/nano_slider/rules.mk b/keyboards/keebwerk/nano_slider/rules.mk index 8b44675a5a..0f31b1cc6f 100644 --- a/keyboards/keebwerk/nano_slider/rules.mk +++ b/keyboards/keebwerk/nano_slider/rules.mk @@ -5,7 +5,7 @@ MCU = atmega32u4 BOOTLOADER = atmel-dfu # Build Options -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/keebzdotnet/fme/rules.mk b/keyboards/keebzdotnet/fme/rules.mk index 49ec442115..9c78569f93 100644 --- a/keyboards/keebzdotnet/fme/rules.mk +++ b/keyboards/keebzdotnet/fme/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/keebzdotnet/wazowski/rules.mk b/keyboards/keebzdotnet/wazowski/rules.mk index 9ef38eab94..9ef8d0c0c2 100644 --- a/keyboards/keebzdotnet/wazowski/rules.mk +++ b/keyboards/keebzdotnet/wazowski/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kelowna/rgb64/rules.mk b/keyboards/kelowna/rgb64/rules.mk index 38a5f91ebe..0741eb95c1 100644 --- a/keyboards/kelowna/rgb64/rules.mk +++ b/keyboards/kelowna/rgb64/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/keybage/radpad/rules.mk b/keyboards/keybage/radpad/rules.mk index adfdaf40e1..05b2184ac1 100644 --- a/keyboards/keybage/radpad/rules.mk +++ b/keyboards/keybage/radpad/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/keybee/keybee65/rules.mk b/keyboards/keybee/keybee65/rules.mk index fb898d093f..7953580c3e 100644 --- a/keyboards/keybee/keybee65/rules.mk +++ b/keyboards/keybee/keybee65/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/keyboardio/atreus/rules.mk b/keyboards/keyboardio/atreus/rules.mk index 8b0f575412..669da566b7 100644 --- a/keyboards/keyboardio/atreus/rules.mk +++ b/keyboards/keyboardio/atreus/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/keycapsss/plaid_pad/rules.mk b/keyboards/keycapsss/plaid_pad/rules.mk index cbbf17166e..69b66129f3 100644 --- a/keyboards/keycapsss/plaid_pad/rules.mk +++ b/keyboards/keycapsss/plaid_pad/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = usbasploader # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/keychron/q1/rev_0102/rules.mk b/keyboards/keychron/q1/rev_0102/rules.mk index 6b50d689d3..978cae719e 100644 --- a/keyboards/keychron/q1/rev_0102/rules.mk +++ b/keyboards/keychron/q1/rev_0102/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/keyhive/maypad/rules.mk b/keyboards/keyhive/maypad/rules.mk index c683a6ed52..d3f521e4d9 100644 --- a/keyboards/keyhive/maypad/rules.mk +++ b/keyboards/keyhive/maypad/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/keyprez/bison/rules.mk b/keyboards/keyprez/bison/rules.mk index d212bb6601..6c618dc256 100644 --- a/keyboards/keyprez/bison/rules.mk +++ b/keyboards/keyprez/bison/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/keyprez/corgi/rules.mk b/keyboards/keyprez/corgi/rules.mk index d747921e91..baba7d9d86 100644 --- a/keyboards/keyprez/corgi/rules.mk +++ b/keyboards/keyprez/corgi/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/keyprez/rhino/rules.mk b/keyboards/keyprez/rhino/rules.mk index c1ccb1f755..bd2c664b52 100644 --- a/keyboards/keyprez/rhino/rules.mk +++ b/keyboards/keyprez/rhino/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/keysofkings/twokey/rules.mk b/keyboards/keysofkings/twokey/rules.mk index a3df98d117..349d9cda2d 100755 --- a/keyboards/keysofkings/twokey/rules.mk +++ b/keyboards/keysofkings/twokey/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kikoslab/kl90/rules.mk b/keyboards/kikoslab/kl90/rules.mk index bffe97bc78..b28e4ce97c 100644 --- a/keyboards/kikoslab/kl90/rules.mk +++ b/keyboards/kikoslab/kl90/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kindakeyboards/conone65/rules.mk b/keyboards/kindakeyboards/conone65/rules.mk index 771d29d012..2cbe7eb385 100644 --- a/keyboards/kindakeyboards/conone65/rules.mk +++ b/keyboards/kindakeyboards/conone65/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kinesis/nguyenvietyen/rules.mk b/keyboards/kinesis/nguyenvietyen/rules.mk index 8ed5c746f2..855c7072a5 100644 --- a/keyboards/kinesis/nguyenvietyen/rules.mk +++ b/keyboards/kinesis/nguyenvietyen/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes EXTRAKEY_ENABLE = yes COMMAND_ENABLE = yes diff --git a/keyboards/kinesis/rules.mk b/keyboards/kinesis/rules.mk index 9722f13046..4bfe9bc0fd 100644 --- a/keyboards/kinesis/rules.mk +++ b/keyboards/kinesis/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = halfkay # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kineticlabs/emu/hotswap/rules.mk b/keyboards/kineticlabs/emu/hotswap/rules.mk index 3a82957bc5..fdb8097023 100644 --- a/keyboards/kineticlabs/emu/hotswap/rules.mk +++ b/keyboards/kineticlabs/emu/hotswap/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kineticlabs/emu/soldered/rules.mk b/keyboards/kineticlabs/emu/soldered/rules.mk index 3a82957bc5..fdb8097023 100644 --- a/keyboards/kineticlabs/emu/soldered/rules.mk +++ b/keyboards/kineticlabs/emu/soldered/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kingly_keys/ave/ortho/rules.mk b/keyboards/kingly_keys/ave/ortho/rules.mk index 20f10e5c10..c28edc9134 100644 --- a/keyboards/kingly_keys/ave/ortho/rules.mk +++ b/keyboards/kingly_keys/ave/ortho/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kingly_keys/ave/staggered/rules.mk b/keyboards/kingly_keys/ave/staggered/rules.mk index 20f10e5c10..c28edc9134 100644 --- a/keyboards/kingly_keys/ave/staggered/rules.mk +++ b/keyboards/kingly_keys/ave/staggered/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kingly_keys/little_foot/rules.mk b/keyboards/kingly_keys/little_foot/rules.mk index d87f7b62c3..cec5dfeebd 100644 --- a/keyboards/kingly_keys/little_foot/rules.mk +++ b/keyboards/kingly_keys/little_foot/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kingly_keys/romac/rules.mk b/keyboards/kingly_keys/romac/rules.mk index 434a677429..35998c3695 100644 --- a/keyboards/kingly_keys/romac/rules.mk +++ b/keyboards/kingly_keys/romac/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kingly_keys/romac_plus/rules.mk b/keyboards/kingly_keys/romac_plus/rules.mk index a50b64bc44..a51db09413 100644 --- a/keyboards/kingly_keys/romac_plus/rules.mk +++ b/keyboards/kingly_keys/romac_plus/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/kingly_keys/ropro/rules.mk b/keyboards/kingly_keys/ropro/rules.mk index dec33ae42e..5392807b8c 100644 --- a/keyboards/kingly_keys/ropro/rules.mk +++ b/keyboards/kingly_keys/ropro/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kingly_keys/soap/rules.mk b/keyboards/kingly_keys/soap/rules.mk index 71a2905f09..da53cdc791 100644 --- a/keyboards/kingly_keys/soap/rules.mk +++ b/keyboards/kingly_keys/soap/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kiwikeebs/macro/rules.mk b/keyboards/kiwikeebs/macro/rules.mk index 6afb83d80a..563e7df2f8 100644 --- a/keyboards/kiwikeebs/macro/rules.mk +++ b/keyboards/kiwikeebs/macro/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kiwikeebs/macro_v2/rules.mk b/keyboards/kiwikeebs/macro_v2/rules.mk index 41aae09aab..d0f092d210 100644 --- a/keyboards/kiwikeebs/macro_v2/rules.mk +++ b/keyboards/kiwikeebs/macro_v2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kiwikey/kawii9/rules.mk b/keyboards/kiwikey/kawii9/rules.mk index 04023c3f9e..299206df1e 100644 --- a/keyboards/kiwikey/kawii9/rules.mk +++ b/keyboards/kiwikey/kawii9/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kiwikey/wanderland/rules.mk b/keyboards/kiwikey/wanderland/rules.mk index dbdd274123..1a2408fb70 100644 --- a/keyboards/kiwikey/wanderland/rules.mk +++ b/keyboards/kiwikey/wanderland/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kmac/rules.mk b/keyboards/kmac/rules.mk index 517218cde5..6a980556b9 100644 --- a/keyboards/kmac/rules.mk +++ b/keyboards/kmac/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kmac_pad/rules.mk b/keyboards/kmac_pad/rules.mk index 3761da69e6..90547999b3 100644 --- a/keyboards/kmac_pad/rules.mk +++ b/keyboards/kmac_pad/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kmini/rules.mk b/keyboards/kmini/rules.mk index 1b67bd5dde..4680be20bd 100755 --- a/keyboards/kmini/rules.mk +++ b/keyboards/kmini/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/knobgoblin/rules.mk b/keyboards/knobgoblin/rules.mk index be3660b23d..823324e78c 100644 --- a/keyboards/knobgoblin/rules.mk +++ b/keyboards/knobgoblin/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/kona_classic/keymaps/ansi/rules.mk b/keyboards/kona_classic/keymaps/ansi/rules.mk index 621b6749cd..27cf4affcd 100644 --- a/keyboards/kona_classic/keymaps/ansi/rules.mk +++ b/keyboards/kona_classic/keymaps/ansi/rules.mk @@ -18,7 +18,7 @@ # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kona_classic/keymaps/ansi_arrows/rules.mk b/keyboards/kona_classic/keymaps/ansi_arrows/rules.mk index 621b6749cd..27cf4affcd 100644 --- a/keyboards/kona_classic/keymaps/ansi_arrows/rules.mk +++ b/keyboards/kona_classic/keymaps/ansi_arrows/rules.mk @@ -18,7 +18,7 @@ # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kona_classic/keymaps/ansi_arrows_lcap/rules.mk b/keyboards/kona_classic/keymaps/ansi_arrows_lcap/rules.mk index 621b6749cd..27cf4affcd 100644 --- a/keyboards/kona_classic/keymaps/ansi_arrows_lcap/rules.mk +++ b/keyboards/kona_classic/keymaps/ansi_arrows_lcap/rules.mk @@ -18,7 +18,7 @@ # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kona_classic/keymaps/ansi_split/rules.mk b/keyboards/kona_classic/keymaps/ansi_split/rules.mk index 621b6749cd..27cf4affcd 100644 --- a/keyboards/kona_classic/keymaps/ansi_split/rules.mk +++ b/keyboards/kona_classic/keymaps/ansi_split/rules.mk @@ -18,7 +18,7 @@ # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kona_classic/keymaps/ansi_split_arrows/rules.mk b/keyboards/kona_classic/keymaps/ansi_split_arrows/rules.mk index 621b6749cd..27cf4affcd 100644 --- a/keyboards/kona_classic/keymaps/ansi_split_arrows/rules.mk +++ b/keyboards/kona_classic/keymaps/ansi_split_arrows/rules.mk @@ -18,7 +18,7 @@ # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kona_classic/keymaps/default/rules.mk b/keyboards/kona_classic/keymaps/default/rules.mk index 621b6749cd..27cf4affcd 100644 --- a/keyboards/kona_classic/keymaps/default/rules.mk +++ b/keyboards/kona_classic/keymaps/default/rules.mk @@ -18,7 +18,7 @@ # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kona_classic/keymaps/iso/rules.mk b/keyboards/kona_classic/keymaps/iso/rules.mk index 621b6749cd..27cf4affcd 100644 --- a/keyboards/kona_classic/keymaps/iso/rules.mk +++ b/keyboards/kona_classic/keymaps/iso/rules.mk @@ -18,7 +18,7 @@ # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kona_classic/keymaps/iso_arrows/rules.mk b/keyboards/kona_classic/keymaps/iso_arrows/rules.mk index 621b6749cd..27cf4affcd 100644 --- a/keyboards/kona_classic/keymaps/iso_arrows/rules.mk +++ b/keyboards/kona_classic/keymaps/iso_arrows/rules.mk @@ -18,7 +18,7 @@ # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kona_classic/keymaps/iso_split/rules.mk b/keyboards/kona_classic/keymaps/iso_split/rules.mk index 621b6749cd..27cf4affcd 100644 --- a/keyboards/kona_classic/keymaps/iso_split/rules.mk +++ b/keyboards/kona_classic/keymaps/iso_split/rules.mk @@ -18,7 +18,7 @@ # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kona_classic/keymaps/iso_split_arrows/rules.mk b/keyboards/kona_classic/keymaps/iso_split_arrows/rules.mk index 621b6749cd..27cf4affcd 100644 --- a/keyboards/kona_classic/keymaps/iso_split_arrows/rules.mk +++ b/keyboards/kona_classic/keymaps/iso_split_arrows/rules.mk @@ -18,7 +18,7 @@ # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kopibeng/xt65/rules.mk b/keyboards/kopibeng/xt65/rules.mk index ade3865832..d6b0bdad95 100644 --- a/keyboards/kopibeng/xt65/rules.mk +++ b/keyboards/kopibeng/xt65/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kprepublic/bm16a/rules.mk b/keyboards/kprepublic/bm16a/rules.mk index e84abc2a42..603dcc54f3 100644 --- a/keyboards/kprepublic/bm16a/rules.mk +++ b/keyboards/kprepublic/bm16a/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kprepublic/bm16s/rules.mk b/keyboards/kprepublic/bm16s/rules.mk index 0ed51b71af..f1be2bad13 100755 --- a/keyboards/kprepublic/bm16s/rules.mk +++ b/keyboards/kprepublic/bm16s/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kprepublic/bm40hsrgb/keymaps/gabustoledo/rules.mk b/keyboards/kprepublic/bm40hsrgb/keymaps/gabustoledo/rules.mk index f9a7c77901..6e27e2f523 100644 --- a/keyboards/kprepublic/bm40hsrgb/keymaps/gabustoledo/rules.mk +++ b/keyboards/kprepublic/bm40hsrgb/keymaps/gabustoledo/rules.mk @@ -2,4 +2,4 @@ MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control AUTO_SHIFT_ENABLE = yes # Auto Shift TAP_DANCE_ENABLE = yes -BOOTMAGIC_ENABLE = yes \ No newline at end of file +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite \ No newline at end of file diff --git a/keyboards/kprepublic/bm40hsrgb/keymaps/signynt/rules.mk b/keyboards/kprepublic/bm40hsrgb/keymaps/signynt/rules.mk index 73ac4823d4..754f3f1f70 100644 --- a/keyboards/kprepublic/bm40hsrgb/keymaps/signynt/rules.mk +++ b/keyboards/kprepublic/bm40hsrgb/keymaps/signynt/rules.mk @@ -1,7 +1,7 @@ #rules MOUSEKEY_ENABLE = yes # Mouse keys -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite EXTRAKEY_ENABLE = yes # Audio control and System control TAP_DANCE_ENABLE = yes #RGB_MATRIX_ENABLE = no diff --git a/keyboards/kprepublic/bm40hsrgb/keymaps/signynt_2_loud/rules.mk b/keyboards/kprepublic/bm40hsrgb/keymaps/signynt_2_loud/rules.mk index 73ac4823d4..754f3f1f70 100644 --- a/keyboards/kprepublic/bm40hsrgb/keymaps/signynt_2_loud/rules.mk +++ b/keyboards/kprepublic/bm40hsrgb/keymaps/signynt_2_loud/rules.mk @@ -1,7 +1,7 @@ #rules MOUSEKEY_ENABLE = yes # Mouse keys -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite EXTRAKEY_ENABLE = yes # Audio control and System control TAP_DANCE_ENABLE = yes #RGB_MATRIX_ENABLE = no diff --git a/keyboards/kprepublic/bm40hsrgb/keymaps/signynt_2_quiet/rules.mk b/keyboards/kprepublic/bm40hsrgb/keymaps/signynt_2_quiet/rules.mk index 73ac4823d4..754f3f1f70 100644 --- a/keyboards/kprepublic/bm40hsrgb/keymaps/signynt_2_quiet/rules.mk +++ b/keyboards/kprepublic/bm40hsrgb/keymaps/signynt_2_quiet/rules.mk @@ -1,7 +1,7 @@ #rules MOUSEKEY_ENABLE = yes # Mouse keys -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite EXTRAKEY_ENABLE = yes # Audio control and System control TAP_DANCE_ENABLE = yes #RGB_MATRIX_ENABLE = no diff --git a/keyboards/kprepublic/bm40hsrgb/rules.mk b/keyboards/kprepublic/bm40hsrgb/rules.mk index ced30614ba..8f49a45d23 100755 --- a/keyboards/kprepublic/bm40hsrgb/rules.mk +++ b/keyboards/kprepublic/bm40hsrgb/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kprepublic/bm43a/rules.mk b/keyboards/kprepublic/bm43a/rules.mk index 077733ea87..bcf7f652ec 100644 --- a/keyboards/kprepublic/bm43a/rules.mk +++ b/keyboards/kprepublic/bm43a/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/kprepublic/bm60rgb/rules.mk b/keyboards/kprepublic/bm60rgb/rules.mk index 674bbe69b9..7202056f31 100644 --- a/keyboards/kprepublic/bm60rgb/rules.mk +++ b/keyboards/kprepublic/bm60rgb/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kprepublic/bm60rgb_iso/rules.mk b/keyboards/kprepublic/bm60rgb_iso/rules.mk index 59bc30a27d..bf88ac85a6 100644 --- a/keyboards/kprepublic/bm60rgb_iso/rules.mk +++ b/keyboards/kprepublic/bm60rgb_iso/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kprepublic/bm65iso/rules.mk b/keyboards/kprepublic/bm65iso/rules.mk index 8e589b49c1..929b2f939f 100644 --- a/keyboards/kprepublic/bm65iso/rules.mk +++ b/keyboards/kprepublic/bm65iso/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kprepublic/bm68rgb/rules.mk b/keyboards/kprepublic/bm68rgb/rules.mk index 96fc8f0b83..910923efd1 100644 --- a/keyboards/kprepublic/bm68rgb/rules.mk +++ b/keyboards/kprepublic/bm68rgb/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kprepublic/cospad/rules.mk b/keyboards/kprepublic/cospad/rules.mk index 211374d914..d967da6c05 100644 --- a/keyboards/kprepublic/cospad/rules.mk +++ b/keyboards/kprepublic/cospad/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kprepublic/jj40/keymaps/fun40/rules.mk b/keyboards/kprepublic/jj40/keymaps/fun40/rules.mk index 187b59675e..cc9508d7d6 100644 --- a/keyboards/kprepublic/jj40/keymaps/fun40/rules.mk +++ b/keyboards/kprepublic/jj40/keymaps/fun40/rules.mk @@ -1,6 +1,6 @@ -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = no # Console for debug(+400) diff --git a/keyboards/kprepublic/jj40/keymaps/waples/rules.mk b/keyboards/kprepublic/jj40/keymaps/waples/rules.mk index e75ff3b8b5..b9b67d1c73 100644 --- a/keyboards/kprepublic/jj40/keymaps/waples/rules.mk +++ b/keyboards/kprepublic/jj40/keymaps/waples/rules.mk @@ -1,5 +1,5 @@ # build options -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no EXTRAKEY_ENABLE = yes CONSOLE_ENABLE = no diff --git a/keyboards/kprepublic/jj50/rules.mk b/keyboards/kprepublic/jj50/rules.mk index 69dcae078c..7e1bf6c45e 100644 --- a/keyboards/kprepublic/jj50/rules.mk +++ b/keyboards/kprepublic/jj50/rules.mk @@ -5,7 +5,7 @@ MCU = atmega32a BOOTLOADER = bootloadhid # build options -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ktec/daisy/rules.mk b/keyboards/ktec/daisy/rules.mk index f459626422..3fe754c12a 100644 --- a/keyboards/ktec/daisy/rules.mk +++ b/keyboards/ktec/daisy/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ktec/staryu/rules.mk b/keyboards/ktec/staryu/rules.mk index 3ae6f05072..b61eb43c32 100755 --- a/keyboards/ktec/staryu/rules.mk +++ b/keyboards/ktec/staryu/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = lufa-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/kv/revt/rules.mk b/keyboards/kv/revt/rules.mk index 3412337f50..abb8d96be0 100644 --- a/keyboards/kv/revt/rules.mk +++ b/keyboards/kv/revt/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/kwub/bloop/rules.mk b/keyboards/kwub/bloop/rules.mk index 49ec442115..9c78569f93 100644 --- a/keyboards/kwub/bloop/rules.mk +++ b/keyboards/kwub/bloop/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/labyrinth75/rules.mk b/keyboards/labyrinth75/rules.mk index aad29c7f95..dd9202fdc7 100644 --- a/keyboards/labyrinth75/rules.mk +++ b/keyboards/labyrinth75/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/latin17rgb/rules.mk b/keyboards/latin17rgb/rules.mk index 1366546e75..072503806a 100644 --- a/keyboards/latin17rgb/rules.mk +++ b/keyboards/latin17rgb/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/latin47ble/rules.mk b/keyboards/latin47ble/rules.mk index 61d3be26e6..b51e91329e 100644 --- a/keyboards/latin47ble/rules.mk +++ b/keyboards/latin47ble/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/latin60rgb/rules.mk b/keyboards/latin60rgb/rules.mk index f116ef4e34..bd5ed434b8 100644 --- a/keyboards/latin60rgb/rules.mk +++ b/keyboards/latin60rgb/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/latin6rgb/rules.mk b/keyboards/latin6rgb/rules.mk index e22ac6c14b..6a328bae87 100644 --- a/keyboards/latin6rgb/rules.mk +++ b/keyboards/latin6rgb/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/latinpad/rules.mk b/keyboards/latinpad/rules.mk index 1a8d7f0a49..730bd9cd37 100644 --- a/keyboards/latinpad/rules.mk +++ b/keyboards/latinpad/rules.mk @@ -6,7 +6,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/launchpad/keymaps/brandonschlack/rules.mk b/keyboards/launchpad/keymaps/brandonschlack/rules.mk index f7d08e3ccb..31c8f7b39d 100644 --- a/keyboards/launchpad/keymaps/brandonschlack/rules.mk +++ b/keyboards/launchpad/keymaps/brandonschlack/rules.mk @@ -5,7 +5,7 @@ IS_MACROPAD = yes BOOTLOADER = atmel-dfu # Build Options -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. CONSOLE_ENABLE = yes # Console for debug(+400) MOUSEKEY_ENABLE = yes # Use mouse keys for scrolling. diff --git a/keyboards/launchpad/keymaps/drashna/rules.mk b/keyboards/launchpad/keymaps/drashna/rules.mk index ffda191131..c3b1e0a8b9 100644 --- a/keyboards/launchpad/keymaps/drashna/rules.mk +++ b/keyboards/launchpad/keymaps/drashna/rules.mk @@ -2,6 +2,6 @@ BOOTLOADER = atmel-dfu RGBLIGHT_ENABLE = no AUDIO_ENABLE = no -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite RGB_MATRIX_ENABLE = yes RGB_MATRIX_DRIVER = WS2812 diff --git a/keyboards/lazydesigners/bolt/rules.mk b/keyboards/lazydesigners/bolt/rules.mk index d533bc65e5..02ae236709 100644 --- a/keyboards/lazydesigners/bolt/rules.mk +++ b/keyboards/lazydesigners/bolt/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/lazydesigners/cassette8/rules.mk b/keyboards/lazydesigners/cassette8/rules.mk index a87017097e..8d06f62d82 100755 --- a/keyboards/lazydesigners/cassette8/rules.mk +++ b/keyboards/lazydesigners/cassette8/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/lazydesigners/dimple/rules.mk b/keyboards/lazydesigners/dimple/rules.mk index 1913836fb1..6ac20a59a5 100644 --- a/keyboards/lazydesigners/dimple/rules.mk +++ b/keyboards/lazydesigners/dimple/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control NKRO_ENABLE = yes # USB Nkey Rollover diff --git a/keyboards/lazydesigners/dimpleplus/rules.mk b/keyboards/lazydesigners/dimpleplus/rules.mk index 5d1353e364..699b9124dd 100644 --- a/keyboards/lazydesigners/dimpleplus/rules.mk +++ b/keyboards/lazydesigners/dimpleplus/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/lazydesigners/the30/rules.mk b/keyboards/lazydesigners/the30/rules.mk index e62dfdcc51..8e36891e9f 100644 --- a/keyboards/lazydesigners/the30/rules.mk +++ b/keyboards/lazydesigners/the30/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/lazydesigners/the40/rules.mk b/keyboards/lazydesigners/the40/rules.mk index e61219d5d0..c34f7d1205 100644 --- a/keyboards/lazydesigners/the40/rules.mk +++ b/keyboards/lazydesigners/the40/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/lazydesigners/the60/rev1/rules.mk b/keyboards/lazydesigners/the60/rev1/rules.mk index e737dd8c06..ee92af3fd6 100755 --- a/keyboards/lazydesigners/the60/rev1/rules.mk +++ b/keyboards/lazydesigners/the60/rev1/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/lazydesigners/the60/rev2/rules.mk b/keyboards/lazydesigners/the60/rev2/rules.mk index b7d001d639..431acd9df5 100755 --- a/keyboards/lazydesigners/the60/rev2/rules.mk +++ b/keyboards/lazydesigners/the60/rev2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/lck75/rules.mk b/keyboards/lck75/rules.mk index 6e8d31ce3c..665f65307a 100644 --- a/keyboards/lck75/rules.mk +++ b/keyboards/lck75/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = usbasploader # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/le_chiffre/rules.mk b/keyboards/le_chiffre/rules.mk index 6a3b3895fa..25712583ab 100644 --- a/keyboards/le_chiffre/rules.mk +++ b/keyboards/le_chiffre/rules.mk @@ -4,7 +4,7 @@ MCU = atmega32u4 # Bootloader selection BOOTLOADER = atmel-dfu -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/leafcutterlabs/bigknob/rules.mk b/keyboards/leafcutterlabs/bigknob/rules.mk index c8e0a3e33d..26c6933008 100644 --- a/keyboards/leafcutterlabs/bigknob/rules.mk +++ b/keyboards/leafcutterlabs/bigknob/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/leeku/finger65/rules.mk b/keyboards/leeku/finger65/rules.mk index 42c1fb52f7..0669ee29cc 100644 --- a/keyboards/leeku/finger65/rules.mk +++ b/keyboards/leeku/finger65/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = bootloadhid # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = no # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/lets_split/keymaps/pyrol/rules.mk b/keyboards/lets_split/keymaps/pyrol/rules.mk index 05bab7d5bf..d4c4ffab6a 100644 --- a/keyboards/lets_split/keymaps/pyrol/rules.mk +++ b/keyboards/lets_split/keymaps/pyrol/rules.mk @@ -1 +1 @@ - BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite + BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite diff --git a/keyboards/lfkeyboards/lfkpad/rules.mk b/keyboards/lfkeyboards/lfkpad/rules.mk index 733c8b8606..18cea63e32 100644 --- a/keyboards/lfkeyboards/lfkpad/rules.mk +++ b/keyboards/lfkeyboards/lfkpad/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/lfkeyboards/smk65/rules.mk b/keyboards/lfkeyboards/smk65/rules.mk index a7dadd2821..28efec35b3 100644 --- a/keyboards/lfkeyboards/smk65/rules.mk +++ b/keyboards/lfkeyboards/smk65/rules.mk @@ -1,7 +1,7 @@ # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/linworks/fave87/rules.mk b/keyboards/linworks/fave87/rules.mk index b2c48df882..e63f2359c8 100644 --- a/keyboards/linworks/fave87/rules.mk +++ b/keyboards/linworks/fave87/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/linworks/whale75/rules.mk b/keyboards/linworks/whale75/rules.mk index 2323ca3719..1d72891376 100644 --- a/keyboards/linworks/whale75/rules.mk +++ b/keyboards/linworks/whale75/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/lizard_trick/tenkey_plusplus/rules.mk b/keyboards/lizard_trick/tenkey_plusplus/rules.mk index d747921e91..baba7d9d86 100644 --- a/keyboards/lizard_trick/tenkey_plusplus/rules.mk +++ b/keyboards/lizard_trick/tenkey_plusplus/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/lm_keyboard/lm60n/rules.mk b/keyboards/lm_keyboard/lm60n/rules.mk index 706a8ae201..cf5d2e685d 100644 --- a/keyboards/lm_keyboard/lm60n/rules.mk +++ b/keyboards/lm_keyboard/lm60n/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/longnald/corin/rules.mk b/keyboards/longnald/corin/rules.mk index a3b924ec2e..a488e3dc0b 100644 --- a/keyboards/longnald/corin/rules.mk +++ b/keyboards/longnald/corin/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ls_60/rules.mk b/keyboards/ls_60/rules.mk index 945a795d04..8ac8fcb8be 100644 --- a/keyboards/ls_60/rules.mk +++ b/keyboards/ls_60/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/m3n3van/rules.mk b/keyboards/m3n3van/rules.mk index fdbad5fc48..698cce9fb1 100644 --- a/keyboards/m3n3van/rules.mk +++ b/keyboards/m3n3van/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/m65/rev1/rules.mk b/keyboards/m65/rev1/rules.mk index 8551c9161a..c4a8259807 100644 --- a/keyboards/m65/rev1/rules.mk +++ b/keyboards/m65/rev1/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32duino # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/makrosu/rules.mk b/keyboards/makrosu/rules.mk index 244d66951d..ae3cb78f31 100644 --- a/keyboards/makrosu/rules.mk +++ b/keyboards/makrosu/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/manta60/rules.mk b/keyboards/manta60/rules.mk index f714527243..876ab73012 100644 --- a/keyboards/manta60/rules.mk +++ b/keyboards/manta60/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = no # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/manyboard/macro/rules.mk b/keyboards/manyboard/macro/rules.mk index 8d87581026..34d79efae1 100644 --- a/keyboards/manyboard/macro/rules.mk +++ b/keyboards/manyboard/macro/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/masterworks/classy_tkl/rev_a/rules.mk b/keyboards/masterworks/classy_tkl/rev_a/rules.mk index 336e630699..24ca03b845 100644 --- a/keyboards/masterworks/classy_tkl/rev_a/rules.mk +++ b/keyboards/masterworks/classy_tkl/rev_a/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/matchstickworks/southpad/rules.mk b/keyboards/matchstickworks/southpad/rules.mk index 53e91d6074..abb5f15055 100644 --- a/keyboards/matchstickworks/southpad/rules.mk +++ b/keyboards/matchstickworks/southpad/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/matrix/cain_re/rules.mk b/keyboards/matrix/cain_re/rules.mk index 706a8ae201..cf5d2e685d 100644 --- a/keyboards/matrix/cain_re/rules.mk +++ b/keyboards/matrix/cain_re/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/matrix/falcon/rules.mk b/keyboards/matrix/falcon/rules.mk index f924c30ed7..ad5ddd9246 100644 --- a/keyboards/matrix/falcon/rules.mk +++ b/keyboards/matrix/falcon/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/matrix/m12og/rev2/rules.mk b/keyboards/matrix/m12og/rev2/rules.mk index edf4fa4b4f..7588e8671d 100644 --- a/keyboards/matrix/m12og/rev2/rules.mk +++ b/keyboards/matrix/m12og/rev2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/matrix/m20add/rules.mk b/keyboards/matrix/m20add/rules.mk index 2f4e457607..e5b9093e37 100644 --- a/keyboards/matrix/m20add/rules.mk +++ b/keyboards/matrix/m20add/rules.mk @@ -13,7 +13,7 @@ BOARD = ST_NUCLEO64_F411RE # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/matrix/noah/rules.mk b/keyboards/matrix/noah/rules.mk index 33f31b9969..83b33df48c 100644 --- a/keyboards/matrix/noah/rules.mk +++ b/keyboards/matrix/noah/rules.mk @@ -13,7 +13,7 @@ BOARD = ST_NUCLEO64_F411RE # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/maxipad/rules.mk b/keyboards/maxipad/rules.mk index 7e7c086c45..35b135deed 100644 --- a/keyboards/maxipad/rules.mk +++ b/keyboards/maxipad/rules.mk @@ -1,7 +1,7 @@ # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/maxr1998/pulse4k/rules.mk b/keyboards/maxr1998/pulse4k/rules.mk index af6a9458be..b977e5db22 100644 --- a/keyboards/maxr1998/pulse4k/rules.mk +++ b/keyboards/maxr1998/pulse4k/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = atmel-dfu # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys ENCODER_ENABLE = yes # Rotary encoders EXTRAKEY_ENABLE = yes # Audio control and System control diff --git a/keyboards/mb44/rules.mk b/keyboards/mb44/rules.mk index 4ca833c7c8..a0de6aceff 100644 --- a/keyboards/mb44/rules.mk +++ b/keyboards/mb44/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/mc_76k/rules.mk b/keyboards/mc_76k/rules.mk index f2e5379ac1..3105d59b77 100644 --- a/keyboards/mc_76k/rules.mk +++ b/keyboards/mc_76k/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/mechanickeys/undead60m/rules.mk b/keyboards/mechanickeys/undead60m/rules.mk index 1bc6b6534e..eb0e0270de 100644 --- a/keyboards/mechanickeys/undead60m/rules.mk +++ b/keyboards/mechanickeys/undead60m/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/mechkeys/mk60/rules.mk b/keyboards/mechkeys/mk60/rules.mk index fb97faa5f0..0d9012c70b 100644 --- a/keyboards/mechkeys/mk60/rules.mk +++ b/keyboards/mechkeys/mk60/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/mechlovin/delphine/rules.mk b/keyboards/mechlovin/delphine/rules.mk index be3533e85b..c95ae3887b 100644 --- a/keyboards/mechlovin/delphine/rules.mk +++ b/keyboards/mechlovin/delphine/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/mechlovin/hannah60rgb/rules.mk b/keyboards/mechlovin/hannah60rgb/rules.mk index b11ad1d357..ef38f055fc 100644 --- a/keyboards/mechlovin/hannah60rgb/rules.mk +++ b/keyboards/mechlovin/hannah60rgb/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/mechlovin/hannah65/rules.mk b/keyboards/mechlovin/hannah65/rules.mk index 96c126bd7b..6323e8584f 100644 --- a/keyboards/mechlovin/hannah65/rules.mk +++ b/keyboards/mechlovin/hannah65/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/mechlovin/hannah910/rev1/rules.mk b/keyboards/mechlovin/hannah910/rev1/rules.mk index f459626422..3fe754c12a 100644 --- a/keyboards/mechlovin/hannah910/rev1/rules.mk +++ b/keyboards/mechlovin/hannah910/rev1/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/mechlovin/hannah910/rev2/rules.mk b/keyboards/mechlovin/hannah910/rev2/rules.mk index f092492125..6afb684cc8 100644 --- a/keyboards/mechlovin/hannah910/rev2/rules.mk +++ b/keyboards/mechlovin/hannah910/rev2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/mechlovin/hannah910/rev3/rules.mk b/keyboards/mechlovin/hannah910/rev3/rules.mk index a75a0f0b30..a87762efe8 100644 --- a/keyboards/mechlovin/hannah910/rev3/rules.mk +++ b/keyboards/mechlovin/hannah910/rev3/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/mechlovin/hex4b/rules.mk b/keyboards/mechlovin/hex4b/rules.mk index 4260226ad6..0d1cf307e1 100644 --- a/keyboards/mechlovin/hex4b/rules.mk +++ b/keyboards/mechlovin/hex4b/rules.mk @@ -10,7 +10,7 @@ F_CPU = 16000000 # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/mechlovin/hex6c/rules.mk b/keyboards/mechlovin/hex6c/rules.mk index 716b2d57e7..0853ef8e7b 100644 --- a/keyboards/mechlovin/hex6c/rules.mk +++ b/keyboards/mechlovin/hex6c/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/mechlovin/infinity87/rules.mk b/keyboards/mechlovin/infinity87/rules.mk index 1c3e8afe23..400c42eb21 100644 --- a/keyboards/mechlovin/infinity87/rules.mk +++ b/keyboards/mechlovin/infinity87/rules.mk @@ -2,7 +2,7 @@ # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/mechlovin/infinity88/rules.mk b/keyboards/mechlovin/infinity88/rules.mk index 7cc6adb50f..1e8563c962 100644 --- a/keyboards/mechlovin/infinity88/rules.mk +++ b/keyboards/mechlovin/infinity88/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/mechlovin/infinityce/rules.mk b/keyboards/mechlovin/infinityce/rules.mk index 81f481950a..aeff331e7e 100644 --- a/keyboards/mechlovin/infinityce/rules.mk +++ b/keyboards/mechlovin/infinityce/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/mechlovin/kanu/rules.mk b/keyboards/mechlovin/kanu/rules.mk index 1a80a2d889..066a67501a 100644 --- a/keyboards/mechlovin/kanu/rules.mk +++ b/keyboards/mechlovin/kanu/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/mechlovin/mechlovin9/rules.mk b/keyboards/mechlovin/mechlovin9/rules.mk index 3e91fe980e..98282f2125 100644 --- a/keyboards/mechlovin/mechlovin9/rules.mk +++ b/keyboards/mechlovin/mechlovin9/rules.mk @@ -1,7 +1,7 @@ # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/mechlovin/olly/jf/rules.mk b/keyboards/mechlovin/olly/jf/rules.mk index 3233ab1cbc..be95cebe84 100644 --- a/keyboards/mechlovin/olly/jf/rules.mk +++ b/keyboards/mechlovin/olly/jf/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = USBasp # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/mechlovin/serratus/rules.mk b/keyboards/mechlovin/serratus/rules.mk index 00deb38709..2288d50d8c 100644 --- a/keyboards/mechlovin/serratus/rules.mk +++ b/keyboards/mechlovin/serratus/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/mechlovin/th1800/rules.mk b/keyboards/mechlovin/th1800/rules.mk index dffe35fa38..9354e10b87 100644 --- a/keyboards/mechlovin/th1800/rules.mk +++ b/keyboards/mechlovin/th1800/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = usbasploader # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/mechlovin/tmkl/rules.mk b/keyboards/mechlovin/tmkl/rules.mk index 65048eb7ec..5fb72c7f3c 100644 --- a/keyboards/mechlovin/tmkl/rules.mk +++ b/keyboards/mechlovin/tmkl/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/mechmini/v1/rules.mk b/keyboards/mechmini/v1/rules.mk index 8560b6a298..d77ba03993 100644 --- a/keyboards/mechmini/v1/rules.mk +++ b/keyboards/mechmini/v1/rules.mk @@ -5,7 +5,7 @@ MCU = atmega32a BOOTLOADER = atmel-dfu # build options -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes EXTRAKEY_ENABLE = yes CONSOLE_ENABLE = no diff --git a/keyboards/mechmini/v2/keymaps/arkag/rules.mk b/keyboards/mechmini/v2/keymaps/arkag/rules.mk index cbc8b06e83..735d573d73 100644 --- a/keyboards/mechmini/v2/keymaps/arkag/rules.mk +++ b/keyboards/mechmini/v2/keymaps/arkag/rules.mk @@ -1,4 +1,4 @@ -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no STENO_ENABLE = no EXTRAKEY_ENABLE = yes diff --git a/keyboards/mechmini/v2/keymaps/lbibass_625_space/rules.mk b/keyboards/mechmini/v2/keymaps/lbibass_625_space/rules.mk index 9f13f14c2a..cf808a2b41 100755 --- a/keyboards/mechmini/v2/keymaps/lbibass_625_space/rules.mk +++ b/keyboards/mechmini/v2/keymaps/lbibass_625_space/rules.mk @@ -1,4 +1,4 @@ -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = yes # Console for debug(+400) diff --git a/keyboards/mechmini/v2/keymaps/lbibass_split_space/rules.mk b/keyboards/mechmini/v2/keymaps/lbibass_split_space/rules.mk index b07c796fff..7d50540f14 100755 --- a/keyboards/mechmini/v2/keymaps/lbibass_split_space/rules.mk +++ b/keyboards/mechmini/v2/keymaps/lbibass_split_space/rules.mk @@ -1,4 +1,4 @@ -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = yes # Console for debug(+400) diff --git a/keyboards/mechmini/v2/keymaps/wsturgiss/rules.mk b/keyboards/mechmini/v2/keymaps/wsturgiss/rules.mk index 49b4a2ab55..c429a6486f 100755 --- a/keyboards/mechmini/v2/keymaps/wsturgiss/rules.mk +++ b/keyboards/mechmini/v2/keymaps/wsturgiss/rules.mk @@ -1,4 +1,4 @@ -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite CONSOLE_ENABLE = no # Console for debug(+400) COMMAND_ENABLE = no # Commands for debug and configuration SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend diff --git a/keyboards/mechmini/v2/rules.mk b/keyboards/mechmini/v2/rules.mk index ea32c0ce70..c4071d79b3 100755 --- a/keyboards/mechmini/v2/rules.mk +++ b/keyboards/mechmini/v2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/mechstudio/dawn/rules.mk b/keyboards/mechstudio/dawn/rules.mk index b2b263491f..ed324bb64d 100644 --- a/keyboards/mechstudio/dawn/rules.mk +++ b/keyboards/mechstudio/dawn/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = qmk-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/mechstudio/ud_40_ortho/rules.mk b/keyboards/mechstudio/ud_40_ortho/rules.mk index 71459b5e70..bb380e5b58 100644 --- a/keyboards/mechstudio/ud_40_ortho/rules.mk +++ b/keyboards/mechstudio/ud_40_ortho/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = qmk-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/mechwild/bde/lefty/rules.mk b/keyboards/mechwild/bde/lefty/rules.mk index 6377d7b3f0..6ba908ad55 100644 --- a/keyboards/mechwild/bde/lefty/rules.mk +++ b/keyboards/mechwild/bde/lefty/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/mechwild/bde/righty/rules.mk b/keyboards/mechwild/bde/righty/rules.mk index 6377d7b3f0..6ba908ad55 100644 --- a/keyboards/mechwild/bde/righty/rules.mk +++ b/keyboards/mechwild/bde/righty/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/mechwild/mercutio/rules.mk b/keyboards/mechwild/mercutio/rules.mk index 4b866c5db1..66bdc206b2 100644 --- a/keyboards/mechwild/mercutio/rules.mk +++ b/keyboards/mechwild/mercutio/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = usbasploader # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/mechwild/murphpad/rules.mk b/keyboards/mechwild/murphpad/rules.mk index 1f72c9ccd3..cac073573b 100644 --- a/keyboards/mechwild/murphpad/rules.mk +++ b/keyboards/mechwild/murphpad/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/mechwild/obe/rules.mk b/keyboards/mechwild/obe/rules.mk index fb66887e62..0b3a24b7fd 100644 --- a/keyboards/mechwild/obe/rules.mk +++ b/keyboards/mechwild/obe/rules.mk @@ -1,7 +1,7 @@ # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/mehkee96/rules.mk b/keyboards/mehkee96/rules.mk index 00ae8043ed..171f3a5734 100644 --- a/keyboards/mehkee96/rules.mk +++ b/keyboards/mehkee96/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = bootloadhid # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/melgeek/mach80/rev1/rules.mk b/keyboards/melgeek/mach80/rev1/rules.mk index d390b07400..73d5710eb8 100755 --- a/keyboards/melgeek/mach80/rev1/rules.mk +++ b/keyboards/melgeek/mach80/rev1/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/melgeek/mj61/rev1/rules.mk b/keyboards/melgeek/mj61/rev1/rules.mk index 00ab8d1110..ea75197f8f 100644 --- a/keyboards/melgeek/mj61/rev1/rules.mk +++ b/keyboards/melgeek/mj61/rev1/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/melgeek/mj61/rev2/rules.mk b/keyboards/melgeek/mj61/rev2/rules.mk index 00ab8d1110..ea75197f8f 100644 --- a/keyboards/melgeek/mj61/rev2/rules.mk +++ b/keyboards/melgeek/mj61/rev2/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/melgeek/mj63/rev1/rules.mk b/keyboards/melgeek/mj63/rev1/rules.mk index cdb90c3f5f..59359784c0 100644 --- a/keyboards/melgeek/mj63/rev1/rules.mk +++ b/keyboards/melgeek/mj63/rev1/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/melgeek/mj63/rev2/rules.mk b/keyboards/melgeek/mj63/rev2/rules.mk index cdb90c3f5f..59359784c0 100644 --- a/keyboards/melgeek/mj63/rev2/rules.mk +++ b/keyboards/melgeek/mj63/rev2/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/melgeek/mj64/rev1/rules.mk b/keyboards/melgeek/mj64/rev1/rules.mk index 036eba8630..581d808f64 100644 --- a/keyboards/melgeek/mj64/rev1/rules.mk +++ b/keyboards/melgeek/mj64/rev1/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/melgeek/mj64/rev2/rules.mk b/keyboards/melgeek/mj64/rev2/rules.mk index 036eba8630..581d808f64 100644 --- a/keyboards/melgeek/mj64/rev2/rules.mk +++ b/keyboards/melgeek/mj64/rev2/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/melgeek/mj64/rev3/rules.mk b/keyboards/melgeek/mj64/rev3/rules.mk index 036eba8630..581d808f64 100644 --- a/keyboards/melgeek/mj64/rev3/rules.mk +++ b/keyboards/melgeek/mj64/rev3/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/melgeek/mj65/rev3/rules.mk b/keyboards/melgeek/mj65/rev3/rules.mk index 790c0efb18..67dab4c8bd 100644 --- a/keyboards/melgeek/mj65/rev3/rules.mk +++ b/keyboards/melgeek/mj65/rev3/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/melgeek/mj6xy/rev3/rules.mk b/keyboards/melgeek/mj6xy/rev3/rules.mk index c492c55d52..54f7c83ac3 100755 --- a/keyboards/melgeek/mj6xy/rev3/rules.mk +++ b/keyboards/melgeek/mj6xy/rev3/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/melgeek/mojo68/rev1/rules.mk b/keyboards/melgeek/mojo68/rev1/rules.mk index 7e9cdf0d0e..f802330c18 100755 --- a/keyboards/melgeek/mojo68/rev1/rules.mk +++ b/keyboards/melgeek/mojo68/rev1/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/melgeek/mojo75/rev1/rules.mk b/keyboards/melgeek/mojo75/rev1/rules.mk index 850c0993dd..2c8ef27319 100644 --- a/keyboards/melgeek/mojo75/rev1/rules.mk +++ b/keyboards/melgeek/mojo75/rev1/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/melgeek/z70ultra/rev1/rules.mk b/keyboards/melgeek/z70ultra/rev1/rules.mk index c643bd5359..bfac26d190 100644 --- a/keyboards/melgeek/z70ultra/rev1/rules.mk +++ b/keyboards/melgeek/z70ultra/rev1/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/melody96/keymaps/konstantin/rules.mk b/keyboards/melody96/keymaps/konstantin/rules.mk index 816ece7b26..b315c8e6b9 100644 --- a/keyboards/melody96/keymaps/konstantin/rules.mk +++ b/keyboards/melody96/keymaps/konstantin/rules.mk @@ -1,5 +1,5 @@ # Generic features -BOOTMAGIC_ENABLE = yes +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite COMMAND_ENABLE = yes CONSOLE_ENABLE = yes EXTRAKEY_ENABLE = yes diff --git a/keyboards/melody96/rules.mk b/keyboards/melody96/rules.mk index 89557e4ea7..d45a04dedf 100644 --- a/keyboards/melody96/rules.mk +++ b/keyboards/melody96/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/merge/um70/rules.mk b/keyboards/merge/um70/rules.mk index b4334c6f9c..3347a8ebbf 100644 --- a/keyboards/merge/um70/rules.mk +++ b/keyboards/merge/um70/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/mesa/mesa_tkl/rules.mk b/keyboards/mesa/mesa_tkl/rules.mk index 6a471b03e2..2eb9369659 100644 --- a/keyboards/mesa/mesa_tkl/rules.mk +++ b/keyboards/mesa/mesa_tkl/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/meson/rules.mk b/keyboards/meson/rules.mk index 3b3aa04ba6..52935ed9d8 100644 --- a/keyboards/meson/rules.mk +++ b/keyboards/meson/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = caterina # change yes to no to disable # SPLIT_KEYBOARD = yes -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/metamechs/timberwolf/rules.mk b/keyboards/metamechs/timberwolf/rules.mk index 4461fa8a6f..63c334e191 100644 --- a/keyboards/metamechs/timberwolf/rules.mk +++ b/keyboards/metamechs/timberwolf/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/mexsistor/ludmila/rules.mk b/keyboards/mexsistor/ludmila/rules.mk index 5c594082ec..971b22c783 100644 --- a/keyboards/mexsistor/ludmila/rules.mk +++ b/keyboards/mexsistor/ludmila/rules.mk @@ -9,7 +9,7 @@ BOOTLOADER = atmel-dfu # CUSTOM_MATRIX = lite SRC = matrix.c -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/miller/gm862/rules.mk b/keyboards/miller/gm862/rules.mk index c4d5352324..41fdb211ed 100644 --- a/keyboards/miller/gm862/rules.mk +++ b/keyboards/miller/gm862/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/millipad/rules.mk b/keyboards/millipad/rules.mk index 64bc93c9c6..2af6060bf9 100644 --- a/keyboards/millipad/rules.mk +++ b/keyboards/millipad/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/mini_elixivy/rules.mk b/keyboards/mini_elixivy/rules.mk index c931451273..c1b300af90 100644 --- a/keyboards/mini_elixivy/rules.mk +++ b/keyboards/mini_elixivy/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/minim/rules.mk b/keyboards/minim/rules.mk index 49ec442115..9c78569f93 100644 --- a/keyboards/minim/rules.mk +++ b/keyboards/minim/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/mio/rules.mk b/keyboards/mio/rules.mk index d533bc65e5..02ae236709 100644 --- a/keyboards/mio/rules.mk +++ b/keyboards/mio/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/misonoworks/chocolatebar/rules.mk b/keyboards/misonoworks/chocolatebar/rules.mk index b3d9c42372..c233b8461e 100644 --- a/keyboards/misonoworks/chocolatebar/rules.mk +++ b/keyboards/misonoworks/chocolatebar/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/misonoworks/karina/rules.mk b/keyboards/misonoworks/karina/rules.mk index 377b32a7c1..ebde6cceac 100644 --- a/keyboards/misonoworks/karina/rules.mk +++ b/keyboards/misonoworks/karina/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/misterknife/knife66/rules.mk b/keyboards/misterknife/knife66/rules.mk index 7e753eb94c..f17458ffef 100644 --- a/keyboards/misterknife/knife66/rules.mk +++ b/keyboards/misterknife/knife66/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/misterknife/knife66_iso/rules.mk b/keyboards/misterknife/knife66_iso/rules.mk index 7e753eb94c..f17458ffef 100644 --- a/keyboards/misterknife/knife66_iso/rules.mk +++ b/keyboards/misterknife/knife66_iso/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/mnk1800s/rules.mk b/keyboards/mnk1800s/rules.mk index 8887e9fa78..a4cf8bab5a 100755 --- a/keyboards/mnk1800s/rules.mk +++ b/keyboards/mnk1800s/rules.mk @@ -9,7 +9,7 @@ OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/mnk50/rules.mk b/keyboards/mnk50/rules.mk index 999bf58d78..8d14f05b82 100755 --- a/keyboards/mnk50/rules.mk +++ b/keyboards/mnk50/rules.mk @@ -12,7 +12,7 @@ OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/mode/m65s/rules.mk b/keyboards/mode/m65s/rules.mk index 6308c54dde..d564e13142 100644 --- a/keyboards/mode/m65s/rules.mk +++ b/keyboards/mode/m65s/rules.mk @@ -4,7 +4,7 @@ MCU = STM32F401 # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/model_v/rules.mk b/keyboards/model_v/rules.mk index 49ec442115..9c78569f93 100644 --- a/keyboards/model_v/rules.mk +++ b/keyboards/model_v/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/mokey/mokey64/rules.mk b/keyboards/mokey/mokey64/rules.mk index a181895095..22bcad10df 100644 --- a/keyboards/mokey/mokey64/rules.mk +++ b/keyboards/mokey/mokey64/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/molecule/rules.mk b/keyboards/molecule/rules.mk index 3efceb761b..2e48304f76 100755 --- a/keyboards/molecule/rules.mk +++ b/keyboards/molecule/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/momoka_ergo/rules.mk b/keyboards/momoka_ergo/rules.mk index ce5e42d378..613ac4cb94 100644 --- a/keyboards/momoka_ergo/rules.mk +++ b/keyboards/momoka_ergo/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/monstargear/xo87/rgb/rules.mk b/keyboards/monstargear/xo87/rgb/rules.mk index dcb663e8fd..3833c1a46e 100644 --- a/keyboards/monstargear/xo87/rgb/rules.mk +++ b/keyboards/monstargear/xo87/rgb/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = lufa-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/monstargear/xo87/solderable/rules.mk b/keyboards/monstargear/xo87/solderable/rules.mk index 02b1308063..4c61124882 100644 --- a/keyboards/monstargear/xo87/solderable/rules.mk +++ b/keyboards/monstargear/xo87/solderable/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = lufa-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/montex/rules.mk b/keyboards/montex/rules.mk index 81f481950a..aeff331e7e 100644 --- a/keyboards/montex/rules.mk +++ b/keyboards/montex/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/montsinger/rebound/rev1/rules.mk b/keyboards/montsinger/rebound/rev1/rules.mk index 605b89e357..4e41713e2f 100644 --- a/keyboards/montsinger/rebound/rev1/rules.mk +++ b/keyboards/montsinger/rebound/rev1/rules.mk @@ -4,7 +4,7 @@ MCU = atmega32u4 # Bootloader selection BOOTLOADER = atmel-dfu -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/montsinger/rebound/rev2/rules.mk b/keyboards/montsinger/rebound/rev2/rules.mk index 163a56eac2..ad3cbd0df1 100644 --- a/keyboards/montsinger/rebound/rev2/rules.mk +++ b/keyboards/montsinger/rebound/rev2/rules.mk @@ -4,7 +4,7 @@ MCU = atmega32u4 # Bootloader selection BOOTLOADER = atmel-dfu -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/montsinger/rebound/rev3/rules.mk b/keyboards/montsinger/rebound/rev3/rules.mk index 163a56eac2..ad3cbd0df1 100644 --- a/keyboards/montsinger/rebound/rev3/rules.mk +++ b/keyboards/montsinger/rebound/rev3/rules.mk @@ -4,7 +4,7 @@ MCU = atmega32u4 # Bootloader selection BOOTLOADER = atmel-dfu -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/montsinger/rebound/rev4/rules.mk b/keyboards/montsinger/rebound/rev4/rules.mk index 3d85724f51..6713705c5a 100644 --- a/keyboards/montsinger/rebound/rev4/rules.mk +++ b/keyboards/montsinger/rebound/rev4/rules.mk @@ -4,7 +4,7 @@ MCU = atmega32u4 # Bootloader selection BOOTLOADER = atmel-dfu -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/montsinger/rewind/rules.mk b/keyboards/montsinger/rewind/rules.mk index ac5cb99ad2..6762197940 100644 --- a/keyboards/montsinger/rewind/rules.mk +++ b/keyboards/montsinger/rewind/rules.mk @@ -4,7 +4,7 @@ MCU = atmega32u4 # Bootloader selection BOOTLOADER = caterina -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/moonlander/keymaps/drashna/rules.mk b/keyboards/moonlander/keymaps/drashna/rules.mk index 0af16d6e17..2a6d20bed5 100644 --- a/keyboards/moonlander/keymaps/drashna/rules.mk +++ b/keyboards/moonlander/keymaps/drashna/rules.mk @@ -1,4 +1,4 @@ TAP_DANCE_ENABLE = yes -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite UNICODE_ENABLE = yes UNICODEMAP_ENABLE = no diff --git a/keyboards/mountainblocks/mb17/rules.mk b/keyboards/mountainblocks/mb17/rules.mk index bd712c0982..74a7851e6c 100644 --- a/keyboards/mountainblocks/mb17/rules.mk +++ b/keyboards/mountainblocks/mb17/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/mt40/rules.mk b/keyboards/mt40/rules.mk index 8df082b02c..4c369aeccf 100644 --- a/keyboards/mt40/rules.mk +++ b/keyboards/mt40/rules.mk @@ -5,7 +5,7 @@ MCU = atmega32a BOOTLOADER = bootloadhid # build options -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/mt64rgb/rules.mk b/keyboards/mt64rgb/rules.mk index af7999fb52..668ce65eb9 100644 --- a/keyboards/mt64rgb/rules.mk +++ b/keyboards/mt64rgb/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/mt84/rules.mk b/keyboards/mt84/rules.mk index 197fb9a3c1..9a6a206000 100644 --- a/keyboards/mt84/rules.mk +++ b/keyboards/mt84/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/mt980/rules.mk b/keyboards/mt980/rules.mk index d5af1faeb2..c6039722ef 100644 --- a/keyboards/mt980/rules.mk +++ b/keyboards/mt980/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = no # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/mxss/rules.mk b/keyboards/mxss/rules.mk index bd456fb503..c5f1021417 100644 --- a/keyboards/mxss/rules.mk +++ b/keyboards/mxss/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/mysticworks/wyvern/rules.mk b/keyboards/mysticworks/wyvern/rules.mk index 37091d2466..7831fa4b5b 100644 --- a/keyboards/mysticworks/wyvern/rules.mk +++ b/keyboards/mysticworks/wyvern/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = qmk-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/naiping/np64/rules.mk b/keyboards/naiping/np64/rules.mk index ad2e51f96f..d9ca1c51e7 100644 --- a/keyboards/naiping/np64/rules.mk +++ b/keyboards/naiping/np64/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/naiping/nphhkb/rules.mk b/keyboards/naiping/nphhkb/rules.mk index d30df5c614..e8ba2cfa8f 100644 --- a/keyboards/naiping/nphhkb/rules.mk +++ b/keyboards/naiping/nphhkb/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/naiping/npminila/rules.mk b/keyboards/naiping/npminila/rules.mk index 945a795d04..8ac8fcb8be 100644 --- a/keyboards/naiping/npminila/rules.mk +++ b/keyboards/naiping/npminila/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/naked60/rules.mk b/keyboards/naked60/rules.mk index 97e9fd1026..1cdec19aa3 100644 --- a/keyboards/naked60/rules.mk +++ b/keyboards/naked60/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/nebula12/rules.mk b/keyboards/nebula12/rules.mk index f336ee1a28..f75c73dd6d 100755 --- a/keyboards/nebula12/rules.mk +++ b/keyboards/nebula12/rules.mk @@ -14,7 +14,7 @@ OPT_DEFS += -DNO_SUSPEND_POWER_DOWN # comment out to disable the options. # BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/nebula68/rules.mk b/keyboards/nebula68/rules.mk index 041753e86e..9994487945 100755 --- a/keyboards/nebula68/rules.mk +++ b/keyboards/nebula68/rules.mk @@ -14,7 +14,7 @@ OPT_DEFS += -DNO_SUSPEND_POWER_DOWN # comment out to disable the options. # BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/neito/rules.mk b/keyboards/neito/rules.mk index ab14f2b9c5..6d73c17332 100644 --- a/keyboards/neito/rules.mk +++ b/keyboards/neito/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/nemui/rules.mk b/keyboards/nemui/rules.mk index 17aa543022..f68afca696 100644 --- a/keyboards/nemui/rules.mk +++ b/keyboards/nemui/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/neokeys/g67/hotswap/rules.mk b/keyboards/neokeys/g67/hotswap/rules.mk index d58ff8f063..bf105353e1 100644 --- a/keyboards/neokeys/g67/hotswap/rules.mk +++ b/keyboards/neokeys/g67/hotswap/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/neokeys/g67/soldered/rules.mk b/keyboards/neokeys/g67/soldered/rules.mk index 20d9fc9072..8736f1580d 100644 --- a/keyboards/neokeys/g67/soldered/rules.mk +++ b/keyboards/neokeys/g67/soldered/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/neopad/rev1/rules.mk b/keyboards/neopad/rev1/rules.mk index f5252179f6..6302e98d3e 100755 --- a/keyboards/neopad/rev1/rules.mk +++ b/keyboards/neopad/rev1/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/neson_design/n6/rules.mk b/keyboards/neson_design/n6/rules.mk index d7dde7ad15..6e14e0a32c 100644 --- a/keyboards/neson_design/n6/rules.mk +++ b/keyboards/neson_design/n6/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/newgame40/rules.mk b/keyboards/newgame40/rules.mk index 12c3cef966..7cbe09e69e 100644 --- a/keyboards/newgame40/rules.mk +++ b/keyboards/newgame40/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = caterina # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/nibiria/stream15/rules.mk b/keyboards/nibiria/stream15/rules.mk index 627f2f6ff2..7bb517154d 100644 --- a/keyboards/nibiria/stream15/rules.mk +++ b/keyboards/nibiria/stream15/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/nightingale_studios/hailey/rules.mk b/keyboards/nightingale_studios/hailey/rules.mk index 5a6f089b39..d430bd9318 100644 --- a/keyboards/nightingale_studios/hailey/rules.mk +++ b/keyboards/nightingale_studios/hailey/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/nightly_boards/adellein/rules.mk b/keyboards/nightly_boards/adellein/rules.mk index bc1b62e2cd..c3e7be7b86 100644 --- a/keyboards/nightly_boards/adellein/rules.mk +++ b/keyboards/nightly_boards/adellein/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/nightly_boards/alter/rev1/rules.mk b/keyboards/nightly_boards/alter/rev1/rules.mk index e303da2db7..550efe2811 100644 --- a/keyboards/nightly_boards/alter/rev1/rules.mk +++ b/keyboards/nightly_boards/alter/rev1/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/nightly_boards/n2/rules.mk b/keyboards/nightly_boards/n2/rules.mk index 0b052e3312..98872ee082 100644 --- a/keyboards/nightly_boards/n2/rules.mk +++ b/keyboards/nightly_boards/n2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/nightly_boards/n40_o/rules.mk b/keyboards/nightly_boards/n40_o/rules.mk index e4d99b77df..4d3958202c 100644 --- a/keyboards/nightly_boards/n40_o/rules.mk +++ b/keyboards/nightly_boards/n40_o/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/nightly_boards/n60_s/rules.mk b/keyboards/nightly_boards/n60_s/rules.mk index 92ed117f8b..d7e8e4b0a6 100644 --- a/keyboards/nightly_boards/n60_s/rules.mk +++ b/keyboards/nightly_boards/n60_s/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/nightly_boards/n87/rules.mk b/keyboards/nightly_boards/n87/rules.mk index d077d56b4a..44a9dbc15f 100644 --- a/keyboards/nightly_boards/n87/rules.mk +++ b/keyboards/nightly_boards/n87/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/nightly_boards/n9/rules.mk b/keyboards/nightly_boards/n9/rules.mk index 6e92f6cb32..14b73e2ce9 100644 --- a/keyboards/nightly_boards/n9/rules.mk +++ b/keyboards/nightly_boards/n9/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/nightly_boards/octopad/rules.mk b/keyboards/nightly_boards/octopad/rules.mk index 283472fce3..f4e4d75591 100644 --- a/keyboards/nightly_boards/octopad/rules.mk +++ b/keyboards/nightly_boards/octopad/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/nightly_boards/ph_arisu/rules.mk b/keyboards/nightly_boards/ph_arisu/rules.mk index 4411195da2..9578124554 100644 --- a/keyboards/nightly_boards/ph_arisu/rules.mk +++ b/keyboards/nightly_boards/ph_arisu/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/nightmare/rules.mk b/keyboards/nightmare/rules.mk index 077733ea87..bcf7f652ec 100644 --- a/keyboards/nightmare/rules.mk +++ b/keyboards/nightmare/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/nimrod/rules.mk b/keyboards/nimrod/rules.mk index d9d724403b..1b29312ff4 100644 --- a/keyboards/nimrod/rules.mk +++ b/keyboards/nimrod/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/nix_studio/oxalys80/rules.mk b/keyboards/nix_studio/oxalys80/rules.mk index 998e0ad73d..b30d9f3301 100644 --- a/keyboards/nix_studio/oxalys80/rules.mk +++ b/keyboards/nix_studio/oxalys80/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/nk1/rules.mk b/keyboards/nk1/rules.mk index ef5045c158..98e1ade790 100644 --- a/keyboards/nk1/rules.mk +++ b/keyboards/nk1/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/nk65/rules.mk b/keyboards/nk65/rules.mk index 56e222be1e..fcb2fca0e8 100755 --- a/keyboards/nk65/rules.mk +++ b/keyboards/nk65/rules.mk @@ -14,7 +14,7 @@ OPT_DEFS += -DNO_SUSPEND_POWER_DOWN # comment out to disable the options. # BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/nk87/rules.mk b/keyboards/nk87/rules.mk index 4eae4bf99a..4018d3cf17 100755 --- a/keyboards/nk87/rules.mk +++ b/keyboards/nk87/rules.mk @@ -13,7 +13,7 @@ OPT_DEFS += -DNO_SUSPEND_POWER_DOWN # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/nknl7en/rules.mk b/keyboards/nknl7en/rules.mk index b32cbc2f64..9bdc73b761 100644 --- a/keyboards/nknl7en/rules.mk +++ b/keyboards/nknl7en/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/nknl7jp/rules.mk b/keyboards/nknl7jp/rules.mk index b32cbc2f64..9bdc73b761 100644 --- a/keyboards/nknl7jp/rules.mk +++ b/keyboards/nknl7jp/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/nomu30/rev1/rules.mk b/keyboards/nomu30/rev1/rules.mk index f7d33ff70a..da812eb7d0 100644 --- a/keyboards/nomu30/rev1/rules.mk +++ b/keyboards/nomu30/rev1/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/nomu30/rev2/rules.mk b/keyboards/nomu30/rev2/rules.mk index 8e2312c7d6..167188e2bd 100644 --- a/keyboards/nomu30/rev2/rules.mk +++ b/keyboards/nomu30/rev2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = no # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/nopunin10did/jabberwocky/rules.mk b/keyboards/nopunin10did/jabberwocky/rules.mk index 49ec442115..9c78569f93 100644 --- a/keyboards/nopunin10did/jabberwocky/rules.mk +++ b/keyboards/nopunin10did/jabberwocky/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/nopunin10did/railroad/rev0/rules.mk b/keyboards/nopunin10did/railroad/rev0/rules.mk index 49ec442115..9c78569f93 100644 --- a/keyboards/nopunin10did/railroad/rev0/rules.mk +++ b/keyboards/nopunin10did/railroad/rev0/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/noxary/220/rules.mk b/keyboards/noxary/220/rules.mk index 04660de94a..26f737d666 100644 --- a/keyboards/noxary/220/rules.mk +++ b/keyboards/noxary/220/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/noxary/260/rules.mk b/keyboards/noxary/260/rules.mk index f3c72a4c40..3984ce0528 100644 --- a/keyboards/noxary/260/rules.mk +++ b/keyboards/noxary/260/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/noxary/268/rules.mk b/keyboards/noxary/268/rules.mk index 6785f2fb50..0b23d7cb96 100644 --- a/keyboards/noxary/268/rules.mk +++ b/keyboards/noxary/268/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/noxary/268_2/rules.mk b/keyboards/noxary/268_2/rules.mk index 4236ca3806..6fcd895aa6 100644 --- a/keyboards/noxary/268_2/rules.mk +++ b/keyboards/noxary/268_2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/noxary/268_2_rgb/rules.mk b/keyboards/noxary/268_2_rgb/rules.mk index c1677dcd9e..4d48dda2cf 100644 --- a/keyboards/noxary/268_2_rgb/rules.mk +++ b/keyboards/noxary/268_2_rgb/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/noxary/280/rules.mk b/keyboards/noxary/280/rules.mk index 6785f2fb50..0b23d7cb96 100644 --- a/keyboards/noxary/280/rules.mk +++ b/keyboards/noxary/280/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/noxary/378/rules.mk b/keyboards/noxary/378/rules.mk index fd9a5c3af0..b40095525f 100644 --- a/keyboards/noxary/378/rules.mk +++ b/keyboards/noxary/378/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/noxary/vulcan/rules.mk b/keyboards/noxary/vulcan/rules.mk index dbdb94b18f..739557beb6 100644 --- a/keyboards/noxary/vulcan/rules.mk +++ b/keyboards/noxary/vulcan/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/noxary/x268/rules.mk b/keyboards/noxary/x268/rules.mk index fcc43a2f73..1709fdacac 100644 --- a/keyboards/noxary/x268/rules.mk +++ b/keyboards/noxary/x268/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/np12/rules.mk b/keyboards/np12/rules.mk index 7565bca860..786af209df 100644 --- a/keyboards/np12/rules.mk +++ b/keyboards/np12/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ocean/gin_v2/rules.mk b/keyboards/ocean/gin_v2/rules.mk index ef357c09e8..9578124554 100644 --- a/keyboards/ocean/gin_v2/rules.mk +++ b/keyboards/ocean/gin_v2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ocean/slamz/rules.mk b/keyboards/ocean/slamz/rules.mk index ef357c09e8..9578124554 100644 --- a/keyboards/ocean/slamz/rules.mk +++ b/keyboards/ocean/slamz/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ocean/stealth/rules.mk b/keyboards/ocean/stealth/rules.mk index a5b7ca9799..e6f23c3ee3 100644 --- a/keyboards/ocean/stealth/rules.mk +++ b/keyboards/ocean/stealth/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ocean/wang_ergo/rules.mk b/keyboards/ocean/wang_ergo/rules.mk index 6fe93c32ad..e6f23c3ee3 100644 --- a/keyboards/ocean/wang_ergo/rules.mk +++ b/keyboards/ocean/wang_ergo/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ocean/wang_v2/rules.mk b/keyboards/ocean/wang_v2/rules.mk index 1dfaf69d22..d462cab2fa 100644 --- a/keyboards/ocean/wang_v2/rules.mk +++ b/keyboards/ocean/wang_v2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/odelia/rules.mk b/keyboards/odelia/rules.mk index c79f74e34b..9906266f48 100644 --- a/keyboards/odelia/rules.mk +++ b/keyboards/odelia/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ok60/rules.mk b/keyboards/ok60/rules.mk index b896727009..7c15782a19 100644 --- a/keyboards/ok60/rules.mk +++ b/keyboards/ok60/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control # CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/omnikey_bh/rules.mk b/keyboards/omnikey_bh/rules.mk index 635cab9537..5d9c83a5a2 100644 --- a/keyboards/omnikey_bh/rules.mk +++ b/keyboards/omnikey_bh/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = halfkay # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/omnikeyish/rules.mk b/keyboards/omnikeyish/rules.mk index a80b9c8a9e..70eb8240d6 100644 --- a/keyboards/omnikeyish/rules.mk +++ b/keyboards/omnikeyish/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = halfkay # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/opus/rules.mk b/keyboards/opus/rules.mk index d295b00f4f..a84bf22627 100644 --- a/keyboards/opus/rules.mk +++ b/keyboards/opus/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/orange75/rules.mk b/keyboards/orange75/rules.mk index 679653ffbb..cbfbc1d583 100644 --- a/keyboards/orange75/rules.mk +++ b/keyboards/orange75/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/org60/rules.mk b/keyboards/org60/rules.mk index 35de172038..6b05c7d99a 100644 --- a/keyboards/org60/rules.mk +++ b/keyboards/org60/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options AUDIO_ENABLE = no # Audio output BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite COMMAND_ENABLE = no # Commands for debug and configuration CONSOLE_ENABLE = no # Console for debug EXTRAKEY_ENABLE = yes # Audio control and System control diff --git a/keyboards/ortho5by12/rules.mk b/keyboards/ortho5by12/rules.mk index 0712246c02..a907bd4efe 100644 --- a/keyboards/ortho5by12/rules.mk +++ b/keyboards/ortho5by12/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = usbasploader # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/orthocode/rules.mk b/keyboards/orthocode/rules.mk index a10ccde0ce..d3553f5612 100644 --- a/keyboards/orthocode/rules.mk +++ b/keyboards/orthocode/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = usbasploader # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/owl8/rules.mk b/keyboards/owl8/rules.mk index a48c2c8768..21c0c67b11 100644 --- a/keyboards/owl8/rules.mk +++ b/keyboards/owl8/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/owlab/jelly_epoch/hotswap/rules.mk b/keyboards/owlab/jelly_epoch/hotswap/rules.mk index 84d9752734..728c7b84c5 100644 --- a/keyboards/owlab/jelly_epoch/hotswap/rules.mk +++ b/keyboards/owlab/jelly_epoch/hotswap/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/owlab/jelly_epoch/soldered/rules.mk b/keyboards/owlab/jelly_epoch/soldered/rules.mk index 84d9752734..728c7b84c5 100644 --- a/keyboards/owlab/jelly_epoch/soldered/rules.mk +++ b/keyboards/owlab/jelly_epoch/soldered/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/owlab/voice65/hotswap/rules.mk b/keyboards/owlab/voice65/hotswap/rules.mk index 2e0e8fa962..c7217e605a 100644 --- a/keyboards/owlab/voice65/hotswap/rules.mk +++ b/keyboards/owlab/voice65/hotswap/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/owlab/voice65/soldered/rules.mk b/keyboards/owlab/voice65/soldered/rules.mk index 06fa985232..e508a48ec8 100644 --- a/keyboards/owlab/voice65/soldered/rules.mk +++ b/keyboards/owlab/voice65/soldered/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/panc40/rules.mk b/keyboards/panc40/rules.mk index 706a8ae201..cf5d2e685d 100644 --- a/keyboards/panc40/rules.mk +++ b/keyboards/panc40/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/pearl/keymaps/cijanzen/rules.mk b/keyboards/pearl/keymaps/cijanzen/rules.mk index 8871739202..c800dc98f8 100644 --- a/keyboards/pearl/keymaps/cijanzen/rules.mk +++ b/keyboards/pearl/keymaps/cijanzen/rules.mk @@ -1,5 +1,5 @@ # build options -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no EXTRAKEY_ENABLE = yes CONSOLE_ENABLE = no diff --git a/keyboards/peej/tripel/rules.mk b/keyboards/peej/tripel/rules.mk index 4b7af7c3f5..8e4c582d1c 100644 --- a/keyboards/peej/tripel/rules.mk +++ b/keyboards/peej/tripel/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/peranekofactory/tone/rev1/rules.mk b/keyboards/peranekofactory/tone/rev1/rules.mk index 7565bca860..786af209df 100644 --- a/keyboards/peranekofactory/tone/rev1/rules.mk +++ b/keyboards/peranekofactory/tone/rev1/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/peranekofactory/tone/rev2/rules.mk b/keyboards/peranekofactory/tone/rev2/rules.mk index 7565bca860..786af209df 100644 --- a/keyboards/peranekofactory/tone/rev2/rules.mk +++ b/keyboards/peranekofactory/tone/rev2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/percent/booster/rules.mk b/keyboards/percent/booster/rules.mk index 388026dfcb..e096ecf0ad 100644 --- a/keyboards/percent/booster/rules.mk +++ b/keyboards/percent/booster/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/percent/canoe/rules.mk b/keyboards/percent/canoe/rules.mk index 39602cba77..fd4f660f2d 100644 --- a/keyboards/percent/canoe/rules.mk +++ b/keyboards/percent/canoe/rules.mk @@ -5,7 +5,7 @@ MCU = atmega32a BOOTLOADER = bootloadhid # build options -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no EXTRAKEY_ENABLE = yes CONSOLE_ENABLE = no diff --git a/keyboards/percent/canoe_gen2/rules.mk b/keyboards/percent/canoe_gen2/rules.mk index 57b63dd91e..6f69242f1e 100644 --- a/keyboards/percent/canoe_gen2/rules.mk +++ b/keyboards/percent/canoe_gen2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/percent/skog/rules.mk b/keyboards/percent/skog/rules.mk index 7c8b7f8b20..f3c5286b0f 100644 --- a/keyboards/percent/skog/rules.mk +++ b/keyboards/percent/skog/rules.mk @@ -5,7 +5,7 @@ MCU = atmega32a BOOTLOADER = bootloadhid # build options -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no EXTRAKEY_ENABLE = yes CONSOLE_ENABLE = no diff --git a/keyboards/phantom/rules.mk b/keyboards/phantom/rules.mk index 816646d34f..41dffbfe8c 100644 --- a/keyboards/phantom/rules.mk +++ b/keyboards/phantom/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = halfkay # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/phase_studio/titan65/hotswap/rules.mk b/keyboards/phase_studio/titan65/hotswap/rules.mk index c69bf7eb23..0def97ca75 100644 --- a/keyboards/phase_studio/titan65/hotswap/rules.mk +++ b/keyboards/phase_studio/titan65/hotswap/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/phase_studio/titan65/soldered/rules.mk b/keyboards/phase_studio/titan65/soldered/rules.mk index b19edd1ab2..6732257d1d 100644 --- a/keyboards/phase_studio/titan65/soldered/rules.mk +++ b/keyboards/phase_studio/titan65/soldered/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/phoenix/rules.mk b/keyboards/phoenix/rules.mk index dd0fea97e0..7104f5785d 100644 --- a/keyboards/phoenix/rules.mk +++ b/keyboards/phoenix/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/picolab/frusta_fundamental/rules.mk b/keyboards/picolab/frusta_fundamental/rules.mk index cebdc0080a..59e517d3d6 100644 --- a/keyboards/picolab/frusta_fundamental/rules.mk +++ b/keyboards/picolab/frusta_fundamental/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/pimentoso/touhoupad/rules.mk b/keyboards/pimentoso/touhoupad/rules.mk index 7e416a7bf0..ac010606a2 100644 --- a/keyboards/pimentoso/touhoupad/rules.mk +++ b/keyboards/pimentoso/touhoupad/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/pisces/rules.mk b/keyboards/pisces/rules.mk index 88e3b495e5..513eee02a3 100644 --- a/keyboards/pisces/rules.mk +++ b/keyboards/pisces/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/pistachio_mp/rules.mk b/keyboards/pistachio_mp/rules.mk index b49b5e548f..88b1907502 100644 --- a/keyboards/pistachio_mp/rules.mk +++ b/keyboards/pistachio_mp/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/pistachio_pro/rules.mk b/keyboards/pistachio_pro/rules.mk index 02f279deed..4986b8c9ea 100644 --- a/keyboards/pistachio_pro/rules.mk +++ b/keyboards/pistachio_pro/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/pizzakeyboards/pizza65/rules.mk b/keyboards/pizzakeyboards/pizza65/rules.mk index 2321c6aa61..73a74eb640 100644 --- a/keyboards/pizzakeyboards/pizza65/rules.mk +++ b/keyboards/pizzakeyboards/pizza65/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/pkb65/rules.mk b/keyboards/pkb65/rules.mk index 49ec442115..9c78569f93 100644 --- a/keyboards/pkb65/rules.mk +++ b/keyboards/pkb65/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/planck/keymaps/buffet/rules.mk b/keyboards/planck/keymaps/buffet/rules.mk index 7a98333c01..cda82158a2 100644 --- a/keyboards/planck/keymaps/buffet/rules.mk +++ b/keyboards/planck/keymaps/buffet/rules.mk @@ -1,5 +1,5 @@ AUDIO_ENABLE = no -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite COMMAND_ENABLE = no MOUSEKEY_ENABLE = no diff --git a/keyboards/planck/keymaps/danielhklein/rules.mk b/keyboards/planck/keymaps/danielhklein/rules.mk index 6b58d814d4..e31e20009a 100644 --- a/keyboards/planck/keymaps/danielhklein/rules.mk +++ b/keyboards/planck/keymaps/danielhklein/rules.mk @@ -1,4 +1,4 @@ -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = no # Console for debug(+400) diff --git a/keyboards/planck/keymaps/ishtob/rules.mk b/keyboards/planck/keymaps/ishtob/rules.mk index da1cca0e85..62ed57bb93 100644 --- a/keyboards/planck/keymaps/ishtob/rules.mk +++ b/keyboards/planck/keymaps/ishtob/rules.mk @@ -2,7 +2,7 @@ # comment out to disable the options. # BACKLIGHT_ENABLE = no -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/planck/keymaps/orthodeluxe/rules.mk b/keyboards/planck/keymaps/orthodeluxe/rules.mk index e657235e80..bf68f645ae 100644 --- a/keyboards/planck/keymaps/orthodeluxe/rules.mk +++ b/keyboards/planck/keymaps/orthodeluxe/rules.mk @@ -2,4 +2,4 @@ AUDIO_ENABLE = yes BACKLIGHT_ENABLE = no KEY_LOCK_ENABLE = yes MOUSEKEY_ENABLE = no -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite diff --git a/keyboards/planck/keymaps/vifon/rules.mk b/keyboards/planck/keymaps/vifon/rules.mk index fb322bfc34..8cc3bcfd0c 100644 --- a/keyboards/planck/keymaps/vifon/rules.mk +++ b/keyboards/planck/keymaps/vifon/rules.mk @@ -4,7 +4,7 @@ # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = no # Console for debug(+400) diff --git a/keyboards/planck/light/rules.mk b/keyboards/planck/light/rules.mk index afd75a5fb6..01779bcd71 100644 --- a/keyboards/planck/light/rules.mk +++ b/keyboards/planck/light/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = atmel-dfu # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/planck/rev1/rules.mk b/keyboards/planck/rev1/rules.mk index 63645c35a6..c56966f0b4 100644 --- a/keyboards/planck/rev1/rules.mk +++ b/keyboards/planck/rev1/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = atmel-dfu # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/planck/rev2/rules.mk b/keyboards/planck/rev2/rules.mk index 63645c35a6..c56966f0b4 100644 --- a/keyboards/planck/rev2/rules.mk +++ b/keyboards/planck/rev2/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = atmel-dfu # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/planck/rev3/rules.mk b/keyboards/planck/rev3/rules.mk index 63645c35a6..c56966f0b4 100644 --- a/keyboards/planck/rev3/rules.mk +++ b/keyboards/planck/rev3/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = atmel-dfu # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/planck/rev4/rules.mk b/keyboards/planck/rev4/rules.mk index dbabe1bf25..fdd03f5a48 100644 --- a/keyboards/planck/rev4/rules.mk +++ b/keyboards/planck/rev4/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = atmel-dfu # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/planck/rev5/rules.mk b/keyboards/planck/rev5/rules.mk index edba079eaa..23c00ed7fa 100644 --- a/keyboards/planck/rev5/rules.mk +++ b/keyboards/planck/rev5/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = qmk-dfu # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/planck/rev6/rules.mk b/keyboards/planck/rev6/rules.mk index 6150d5d1ce..b4c90c0cfe 100644 --- a/keyboards/planck/rev6/rules.mk +++ b/keyboards/planck/rev6/rules.mk @@ -9,7 +9,7 @@ BOOTLOADER = stm32-dfu # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/planck/thk/rules.mk b/keyboards/planck/thk/rules.mk index 0095bba5a8..82e38fc7f4 100644 --- a/keyboards/planck/thk/rules.mk +++ b/keyboards/planck/thk/rules.mk @@ -25,7 +25,7 @@ BOOTLOADER = usbasploader # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/playkbtw/ca66/rules.mk b/keyboards/playkbtw/ca66/rules.mk index 89557e4ea7..d45a04dedf 100644 --- a/keyboards/playkbtw/ca66/rules.mk +++ b/keyboards/playkbtw/ca66/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/playkbtw/helen80/rules.mk b/keyboards/playkbtw/helen80/rules.mk index 0163d38c55..7335044933 100644 --- a/keyboards/playkbtw/helen80/rules.mk +++ b/keyboards/playkbtw/helen80/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/playkbtw/pk60/rules.mk b/keyboards/playkbtw/pk60/rules.mk index f8416044b9..f3322308e2 100644 --- a/keyboards/playkbtw/pk60/rules.mk +++ b/keyboards/playkbtw/pk60/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/plexus75/rules.mk b/keyboards/plexus75/rules.mk index 44ffee7ef2..70b5c558df 100644 --- a/keyboards/plexus75/rules.mk +++ b/keyboards/plexus75/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ploopyco/mouse/rules.mk b/keyboards/ploopyco/mouse/rules.mk index 20b96abab4..c02afa00c3 100644 --- a/keyboards/ploopyco/mouse/rules.mk +++ b/keyboards/ploopyco/mouse/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration diff --git a/keyboards/ploopyco/trackball/rules.mk b/keyboards/ploopyco/trackball/rules.mk index 9b7285a015..af9bc7d4ce 100644 --- a/keyboards/ploopyco/trackball/rules.mk +++ b/keyboards/ploopyco/trackball/rules.mk @@ -7,7 +7,7 @@ F_CPU = 8000000 # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration diff --git a/keyboards/ploopyco/trackball_mini/rules.mk b/keyboards/ploopyco/trackball_mini/rules.mk index 6fc5199edc..07a6889cbe 100644 --- a/keyboards/ploopyco/trackball_mini/rules.mk +++ b/keyboards/ploopyco/trackball_mini/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration diff --git a/keyboards/plume/plume65/rules.mk b/keyboards/plume/plume65/rules.mk index 1469070fe0..dffafb00a4 100644 --- a/keyboards/plume/plume65/rules.mk +++ b/keyboards/plume/plume65/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = qmk-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/plut0nium/0x3e/rules.mk b/keyboards/plut0nium/0x3e/rules.mk index 7a0ec2db21..c82a7231ae 100644 --- a/keyboards/plut0nium/0x3e/rules.mk +++ b/keyboards/plut0nium/0x3e/rules.mk @@ -5,7 +5,7 @@ MCU = atmega32u4 BOOTLOADER = atmel-dfu # Build Options -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/pohjolaworks/louhi/rules.mk b/keyboards/pohjolaworks/louhi/rules.mk index 7565bca860..786af209df 100644 --- a/keyboards/pohjolaworks/louhi/rules.mk +++ b/keyboards/pohjolaworks/louhi/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/poker87c/rules.mk b/keyboards/poker87c/rules.mk index b092d33b6a..131264b21a 100644 --- a/keyboards/poker87c/rules.mk +++ b/keyboards/poker87c/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/poker87d/rules.mk b/keyboards/poker87d/rules.mk index d2668e7e90..65c9772e7a 100644 --- a/keyboards/poker87d/rules.mk +++ b/keyboards/poker87d/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/polycarbdiet/s20/rules.mk b/keyboards/polycarbdiet/s20/rules.mk index 4e17fcc5b7..f01d87605c 100644 --- a/keyboards/polycarbdiet/s20/rules.mk +++ b/keyboards/polycarbdiet/s20/rules.mk @@ -6,7 +6,7 @@ BOOTLOADER = atmel-dfu # Build Options -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/pom_keyboards/tnln95/rules.mk b/keyboards/pom_keyboards/tnln95/rules.mk index 9fcdb878a2..8ef55ee35d 100644 --- a/keyboards/pom_keyboards/tnln95/rules.mk +++ b/keyboards/pom_keyboards/tnln95/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/portal_66/rules.mk b/keyboards/portal_66/rules.mk index a3cd44fa42..e881cb0011 100644 --- a/keyboards/portal_66/rules.mk +++ b/keyboards/portal_66/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/pos78/rules.mk b/keyboards/pos78/rules.mk index c79f74e34b..9906266f48 100644 --- a/keyboards/pos78/rules.mk +++ b/keyboards/pos78/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/preonic/keymaps/arkag/rules.mk b/keyboards/preonic/keymaps/arkag/rules.mk index 671da6f94d..5b87801fca 100644 --- a/keyboards/preonic/keymaps/arkag/rules.mk +++ b/keyboards/preonic/keymaps/arkag/rules.mk @@ -1,4 +1,4 @@ -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no STENO_ENABLE = no EXTRAKEY_ENABLE = yes diff --git a/keyboards/preonic/keymaps/dlaroe/rules.mk b/keyboards/preonic/keymaps/dlaroe/rules.mk index 38fb7375c0..4a62771e70 100644 --- a/keyboards/preonic/keymaps/dlaroe/rules.mk +++ b/keyboards/preonic/keymaps/dlaroe/rules.mk @@ -4,7 +4,7 @@ # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = no # Console for debug(+400) diff --git a/keyboards/preonic/rev1/rules.mk b/keyboards/preonic/rev1/rules.mk index 5cc5be7f7b..58c48aa5e0 100644 --- a/keyboards/preonic/rev1/rules.mk +++ b/keyboards/preonic/rev1/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = atmel-dfu # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/preonic/rev2/rules.mk b/keyboards/preonic/rev2/rules.mk index 9d3bef39f1..2fcfb66c30 100644 --- a/keyboards/preonic/rev2/rules.mk +++ b/keyboards/preonic/rev2/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = qmk-dfu # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/preonic/rev3/rules.mk b/keyboards/preonic/rev3/rules.mk index b89945642b..5faf3fda49 100644 --- a/keyboards/preonic/rev3/rules.mk +++ b/keyboards/preonic/rev3/rules.mk @@ -9,7 +9,7 @@ BOOTLOADER = stm32-dfu # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/primekb/meridian/rules.mk b/keyboards/primekb/meridian/rules.mk index 03b7598521..fe92253a9a 100644 --- a/keyboards/primekb/meridian/rules.mk +++ b/keyboards/primekb/meridian/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/primekb/prime_e/rules.mk b/keyboards/primekb/prime_e/rules.mk index c10645db9a..7ae7f2593d 100644 --- a/keyboards/primekb/prime_e/rules.mk +++ b/keyboards/primekb/prime_e/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/primekb/prime_r/rules.mk b/keyboards/primekb/prime_r/rules.mk index 8450077342..af2fdc22c9 100644 --- a/keyboards/primekb/prime_r/rules.mk +++ b/keyboards/primekb/prime_r/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/program_yoink/rules.mk b/keyboards/program_yoink/rules.mk index d068d66ca0..afb9e42e2d 100644 --- a/keyboards/program_yoink/rules.mk +++ b/keyboards/program_yoink/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/projectcain/vault45/rules.mk b/keyboards/projectcain/vault45/rules.mk index c79f74e34b..9906266f48 100644 --- a/keyboards/projectcain/vault45/rules.mk +++ b/keyboards/projectcain/vault45/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/projectkb/alice/rev1/rules.mk b/keyboards/projectkb/alice/rev1/rules.mk index 1a716b9235..64e923fc4f 100644 --- a/keyboards/projectkb/alice/rev1/rules.mk +++ b/keyboards/projectkb/alice/rev1/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/projectkb/alice/rev2/rules.mk b/keyboards/projectkb/alice/rev2/rules.mk index 1a716b9235..64e923fc4f 100644 --- a/keyboards/projectkb/alice/rev2/rules.mk +++ b/keyboards/projectkb/alice/rev2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/prototypist/j01/rules.mk b/keyboards/prototypist/j01/rules.mk index 437af0317e..f8d06dd9f7 100644 --- a/keyboards/prototypist/j01/rules.mk +++ b/keyboards/prototypist/j01/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/pursuit40/rules.mk b/keyboards/pursuit40/rules.mk index 706a8ae201..cf5d2e685d 100644 --- a/keyboards/pursuit40/rules.mk +++ b/keyboards/pursuit40/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/q4z/rules.mk b/keyboards/q4z/rules.mk index 5377dfaaf7..a01184d679 100644 --- a/keyboards/q4z/rules.mk +++ b/keyboards/q4z/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/qaz/rules.mk b/keyboards/qaz/rules.mk index 90c3141cf2..7cd5f80392 100644 --- a/keyboards/qaz/rules.mk +++ b/keyboards/qaz/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/quad_h/lb75/rules.mk b/keyboards/quad_h/lb75/rules.mk index ade3865832..d6b0bdad95 100644 --- a/keyboards/quad_h/lb75/rules.mk +++ b/keyboards/quad_h/lb75/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/quantrik/kyuu/rules.mk b/keyboards/quantrik/kyuu/rules.mk index 077733ea87..bcf7f652ec 100644 --- a/keyboards/quantrik/kyuu/rules.mk +++ b/keyboards/quantrik/kyuu/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/quark/rules.mk b/keyboards/quark/rules.mk index 0566e5e82b..0cd8f87863 100644 --- a/keyboards/quark/rules.mk +++ b/keyboards/quark/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/qvex/lynepad/rules.mk b/keyboards/qvex/lynepad/rules.mk index d1a33ed5d4..6a1a813973 100644 --- a/keyboards/qvex/lynepad/rules.mk +++ b/keyboards/qvex/lynepad/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/rabbit_capture_plan/rules.mk b/keyboards/rabbit_capture_plan/rules.mk index d2a391d869..7fa142f623 100644 --- a/keyboards/rabbit_capture_plan/rules.mk +++ b/keyboards/rabbit_capture_plan/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/rainkeeb/rules.mk b/keyboards/rainkeeb/rules.mk index 64a8cc3a1e..058ed8e577 100644 --- a/keyboards/rainkeeb/rules.mk +++ b/keyboards/rainkeeb/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ramonimbao/aelith/rules.mk b/keyboards/ramonimbao/aelith/rules.mk index e7a71be04a..de578c57a5 100644 --- a/keyboards/ramonimbao/aelith/rules.mk +++ b/keyboards/ramonimbao/aelith/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = usbasploader # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ramonimbao/chevron/rules.mk b/keyboards/ramonimbao/chevron/rules.mk index 49a89f4a63..533e0f2cc8 100644 --- a/keyboards/ramonimbao/chevron/rules.mk +++ b/keyboards/ramonimbao/chevron/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = usbasploader # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ramonimbao/herringbone/pro/rules.mk b/keyboards/ramonimbao/herringbone/pro/rules.mk index ec75f3e122..aa551caae0 100644 --- a/keyboards/ramonimbao/herringbone/pro/rules.mk +++ b/keyboards/ramonimbao/herringbone/pro/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = usbasploader # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ramonimbao/herringbone/v1/rules.mk b/keyboards/ramonimbao/herringbone/v1/rules.mk index 49a15005c4..c1b6074978 100644 --- a/keyboards/ramonimbao/herringbone/v1/rules.mk +++ b/keyboards/ramonimbao/herringbone/v1/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = usbasploader # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ramonimbao/mona/v1/rules.mk b/keyboards/ramonimbao/mona/v1/rules.mk index c79f74e34b..9906266f48 100644 --- a/keyboards/ramonimbao/mona/v1/rules.mk +++ b/keyboards/ramonimbao/mona/v1/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ramonimbao/mona/v1_1/rules.mk b/keyboards/ramonimbao/mona/v1_1/rules.mk index c79f74e34b..9906266f48 100644 --- a/keyboards/ramonimbao/mona/v1_1/rules.mk +++ b/keyboards/ramonimbao/mona/v1_1/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ramonimbao/tkl_ff/rules.mk b/keyboards/ramonimbao/tkl_ff/rules.mk index 5f64bd414b..9906266f48 100644 --- a/keyboards/ramonimbao/tkl_ff/rules.mk +++ b/keyboards/ramonimbao/tkl_ff/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ramonimbao/wete/keymaps/via/rules.mk b/keyboards/ramonimbao/wete/keymaps/via/rules.mk index 5abd4f5bdf..666e72557b 100644 --- a/keyboards/ramonimbao/wete/keymaps/via/rules.mk +++ b/keyboards/ramonimbao/wete/keymaps/via/rules.mk @@ -1,2 +1,2 @@ VIA_ENABLE = yes -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite diff --git a/keyboards/rart/rart45/rules.mk b/keyboards/rart/rart45/rules.mk index 7a50fbb778..2057d9c939 100644 --- a/keyboards/rart/rart45/rules.mk +++ b/keyboards/rart/rart45/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = usbasploader # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/rart/rart4x4/rules.mk b/keyboards/rart/rart4x4/rules.mk index faf08d6efb..044487bcfe 100644 --- a/keyboards/rart/rart4x4/rules.mk +++ b/keyboards/rart/rart4x4/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/rart/rart67/rules.mk b/keyboards/rart/rart67/rules.mk index 38eabd3670..dd2a91bc83 100644 --- a/keyboards/rart/rart67/rules.mk +++ b/keyboards/rart/rart67/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/rart/rart75/rules.mk b/keyboards/rart/rart75/rules.mk index 528d54d5de..a256d126cf 100644 --- a/keyboards/rart/rart75/rules.mk +++ b/keyboards/rart/rart75/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/rart/rart75m/rules.mk b/keyboards/rart/rart75m/rules.mk index e084a746f6..0b2ca0a4c1 100644 --- a/keyboards/rart/rart75m/rules.mk +++ b/keyboards/rart/rart75m/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/rart/rartand/rules.mk b/keyboards/rart/rartand/rules.mk index 643b6604bb..4eec21d3ad 100644 --- a/keyboards/rart/rartand/rules.mk +++ b/keyboards/rart/rartand/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = usbasploader # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/rart/rartland/rules.mk b/keyboards/rart/rartland/rules.mk index b5b4a0c2a0..b490b53538 100644 --- a/keyboards/rart/rartland/rules.mk +++ b/keyboards/rart/rartland/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = usbasploader # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/rart/rartlite/rules.mk b/keyboards/rart/rartlite/rules.mk index 81fbef3163..e0923782c9 100644 --- a/keyboards/rart/rartlite/rules.mk +++ b/keyboards/rart/rartlite/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/rart/rartpad/rules.mk b/keyboards/rart/rartpad/rules.mk index 683a8fd348..128194a031 100644 --- a/keyboards/rart/rartpad/rules.mk +++ b/keyboards/rart/rartpad/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/retro_75/rules.mk b/keyboards/retro_75/rules.mk index 9c4bfcdea6..7cceca328d 100644 --- a/keyboards/retro_75/rules.mk +++ b/keyboards/retro_75/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/reversestudio/decadepad/rules.mk b/keyboards/reversestudio/decadepad/rules.mk index 2c272ca2fa..b752edc467 100644 --- a/keyboards/reversestudio/decadepad/rules.mk +++ b/keyboards/reversestudio/decadepad/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/rgbkb/pan/rules.mk b/keyboards/rgbkb/pan/rules.mk index 106120cb8d..0767977a79 100644 --- a/keyboards/rgbkb/pan/rules.mk +++ b/keyboards/rgbkb/pan/rules.mk @@ -1,7 +1,7 @@ # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/rgbkb/sol/keymaps/default/readme.md b/keyboards/rgbkb/sol/keymaps/default/readme.md index 3769d0981d..6a009d6310 100644 --- a/keyboards/rgbkb/sol/keymaps/default/readme.md +++ b/keyboards/rgbkb/sol/keymaps/default/readme.md @@ -77,7 +77,7 @@ see `qmk_firmware/keyboards/sol/rev1/keymaps/default/rules.mk` # Variables you can set for SOL -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = yes # Console for debug(+400) diff --git a/keyboards/rgbkb/sol/keymaps/xyverz/readme.md b/keyboards/rgbkb/sol/keymaps/xyverz/readme.md index 485426f8e4..9405a5a78c 100644 --- a/keyboards/rgbkb/sol/keymaps/xyverz/readme.md +++ b/keyboards/rgbkb/sol/keymaps/xyverz/readme.md @@ -93,7 +93,7 @@ see `qmk_firmware/keyboards/sol/rev1/keymaps/default/rules.mk` # Variables you can set for SOL -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/rgbkb/zygomorph/keymaps/default/readme.md b/keyboards/rgbkb/zygomorph/keymaps/default/readme.md index 6a9c874b22..4025696470 100644 --- a/keyboards/rgbkb/zygomorph/keymaps/default/readme.md +++ b/keyboards/rgbkb/zygomorph/keymaps/default/readme.md @@ -84,7 +84,7 @@ see `qmk_firmware/keyboards/zygomorph/rev1/keymaps/default/rules.mk` # Variables you can set for Zygomorph -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = yes # Console for debug(+400) diff --git a/keyboards/rgbkb/zygomorph/keymaps/kageurufu/readme.md b/keyboards/rgbkb/zygomorph/keymaps/kageurufu/readme.md index 77e88a078f..35148c3b01 100644 --- a/keyboards/rgbkb/zygomorph/keymaps/kageurufu/readme.md +++ b/keyboards/rgbkb/zygomorph/keymaps/kageurufu/readme.md @@ -94,7 +94,7 @@ see `qmk_firmware/keyboards/sol/rev1/keymaps/default/rules.mk` # Variables you can set for SOL -BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = yes # Console for debug(+400) diff --git a/keyboards/rocketboard_16/rules.mk b/keyboards/rocketboard_16/rules.mk index f51d481382..dd7f88d616 100644 --- a/keyboards/rocketboard_16/rules.mk +++ b/keyboards/rocketboard_16/rules.mk @@ -18,7 +18,7 @@ SRC += keycode_lookup.c # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/rominronin/katana60/rev1/rules.mk b/keyboards/rominronin/katana60/rev1/rules.mk index 077733ea87..bcf7f652ec 100644 --- a/keyboards/rominronin/katana60/rev1/rules.mk +++ b/keyboards/rominronin/katana60/rev1/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/roseslite/rules.mk b/keyboards/roseslite/rules.mk index 49ec442115..9c78569f93 100644 --- a/keyboards/roseslite/rules.mk +++ b/keyboards/roseslite/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/rotr/rules.mk b/keyboards/rotr/rules.mk index 1d5a162194..6d85d5f50e 100644 --- a/keyboards/rotr/rules.mk +++ b/keyboards/rotr/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/rpiguy9907/southpaw66/rules.mk b/keyboards/rpiguy9907/southpaw66/rules.mk index 9854bd78f9..f42a5203ef 100644 --- a/keyboards/rpiguy9907/southpaw66/rules.mk +++ b/keyboards/rpiguy9907/southpaw66/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/runes/vaengr/rules.mk b/keyboards/runes/vaengr/rules.mk index 9ca749f6d9..2429ba6d96 100644 --- a/keyboards/runes/vaengr/rules.mk +++ b/keyboards/runes/vaengr/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ryanbaekr/rb86/rules.mk b/keyboards/ryanbaekr/rb86/rules.mk index 20b467521e..74a7851e6c 100644 --- a/keyboards/ryanbaekr/rb86/rules.mk +++ b/keyboards/ryanbaekr/rb86/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/ryloo_studio/m0110/rules.mk b/keyboards/ryloo_studio/m0110/rules.mk index 1905dbc5b2..f494298fd6 100755 --- a/keyboards/ryloo_studio/m0110/rules.mk +++ b/keyboards/ryloo_studio/m0110/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/sam/s80/rules.mk b/keyboards/sam/s80/rules.mk index 81f481950a..aeff331e7e 100644 --- a/keyboards/sam/s80/rules.mk +++ b/keyboards/sam/s80/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/sam/sg81m/rules.mk b/keyboards/sam/sg81m/rules.mk index 6bbd42be61..80af78e3cf 100644 --- a/keyboards/sam/sg81m/rules.mk +++ b/keyboards/sam/sg81m/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/sanctified/dystopia/rules.mk b/keyboards/sanctified/dystopia/rules.mk index 643e7a05d8..ff14db03f1 100644 --- a/keyboards/sanctified/dystopia/rules.mk +++ b/keyboards/sanctified/dystopia/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/satt/vision/rules.mk b/keyboards/satt/vision/rules.mk index 65058d09c2..5a5651dfb5 100644 --- a/keyboards/satt/vision/rules.mk +++ b/keyboards/satt/vision/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/sawnsprojects/satxri6key/rules.mk b/keyboards/sawnsprojects/satxri6key/rules.mk index b1039452ec..bff898cce5 100644 --- a/keyboards/sawnsprojects/satxri6key/rules.mk +++ b/keyboards/sawnsprojects/satxri6key/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/scarletbandana/rules.mk b/keyboards/scarletbandana/rules.mk index 5f084a84ab..f8c675daaa 100644 --- a/keyboards/scarletbandana/rules.mk +++ b/keyboards/scarletbandana/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/scatter42/rules.mk b/keyboards/scatter42/rules.mk index c0d6e2c1b1..04adaadcc9 100644 --- a/keyboards/scatter42/rules.mk +++ b/keyboards/scatter42/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/sck/gtm/rules.mk b/keyboards/sck/gtm/rules.mk index a0f503ea6f..3585bec2e3 100644 --- a/keyboards/sck/gtm/rules.mk +++ b/keyboards/sck/gtm/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = no # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/sck/m0116b/rules.mk b/keyboards/sck/m0116b/rules.mk index 576d4ef5f2..10e9616d6f 100644 --- a/keyboards/sck/m0116b/rules.mk +++ b/keyboards/sck/m0116b/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/sck/neiso/rules.mk b/keyboards/sck/neiso/rules.mk index bc83db6a6c..43530f6244 100644 --- a/keyboards/sck/neiso/rules.mk +++ b/keyboards/sck/neiso/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = no # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/sck/osa/rules.mk b/keyboards/sck/osa/rules.mk index 3698c0ba0e..9841c0ca88 100644 --- a/keyboards/sck/osa/rules.mk +++ b/keyboards/sck/osa/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/scythe/rules.mk b/keyboards/scythe/rules.mk index 5d08e37774..017023d00e 100644 --- a/keyboards/scythe/rules.mk +++ b/keyboards/scythe/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/seigaiha/rules.mk b/keyboards/seigaiha/rules.mk index 7bf6ba3800..a56deff61e 100644 --- a/keyboards/seigaiha/rules.mk +++ b/keyboards/seigaiha/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = usbasploader # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/sekigon/grs_70ec/rules.mk b/keyboards/sekigon/grs_70ec/rules.mk index 4288498b77..aeb1f81ced 100644 --- a/keyboards/sekigon/grs_70ec/rules.mk +++ b/keyboards/sekigon/grs_70ec/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/senselessclay/had60/rules.mk b/keyboards/senselessclay/had60/rules.mk index defd222ae8..8075959d81 100644 --- a/keyboards/senselessclay/had60/rules.mk +++ b/keyboards/senselessclay/had60/rules.mk @@ -5,7 +5,7 @@ MCU = atmega32u4 BOOTLOADER = atmel-dfu # Build Options -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/sentraq/s60_x/default/rules.mk b/keyboards/sentraq/s60_x/default/rules.mk index 328768f9e7..5da97f696d 100644 --- a/keyboards/sentraq/s60_x/default/rules.mk +++ b/keyboards/sentraq/s60_x/default/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/sentraq/s60_x/keymaps/ansi_qwertz/rules.mk b/keyboards/sentraq/s60_x/keymaps/ansi_qwertz/rules.mk index 0954c54c98..0c19dc9db3 100644 --- a/keyboards/sentraq/s60_x/keymaps/ansi_qwertz/rules.mk +++ b/keyboards/sentraq/s60_x/keymaps/ansi_qwertz/rules.mk @@ -2,7 +2,7 @@ # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = yes # Console for debug(+400) diff --git a/keyboards/sentraq/s60_x/rgb/rules.mk b/keyboards/sentraq/s60_x/rgb/rules.mk index dd294d1be3..9fd43fea37 100644 --- a/keyboards/sentraq/s60_x/rgb/rules.mk +++ b/keyboards/sentraq/s60_x/rgb/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/sentraq/s65_plus/rules.mk b/keyboards/sentraq/s65_plus/rules.mk index 2289322fa7..22d25d56c6 100644 --- a/keyboards/sentraq/s65_plus/rules.mk +++ b/keyboards/sentraq/s65_plus/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/sentraq/s65_x/rules.mk b/keyboards/sentraq/s65_x/rules.mk index 7212ce40d3..212786d8e6 100644 --- a/keyboards/sentraq/s65_x/rules.mk +++ b/keyboards/sentraq/s65_x/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/sets3n/kk980/rules.mk b/keyboards/sets3n/kk980/rules.mk index 1047658606..eb485c4349 100644 --- a/keyboards/sets3n/kk980/rules.mk +++ b/keyboards/sets3n/kk980/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/shambles/rules.mk b/keyboards/shambles/rules.mk index 49ec442115..9c78569f93 100644 --- a/keyboards/shambles/rules.mk +++ b/keyboards/shambles/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/shk9/rules.mk b/keyboards/shk9/rules.mk index dbdb94b18f..739557beb6 100644 --- a/keyboards/shk9/rules.mk +++ b/keyboards/shk9/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/sidderskb/majbritt/rev2/rules.mk b/keyboards/sidderskb/majbritt/rev2/rules.mk index 6d215c545e..5d39fd5c33 100644 --- a/keyboards/sidderskb/majbritt/rev2/rules.mk +++ b/keyboards/sidderskb/majbritt/rev2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/silverbullet44/rules.mk b/keyboards/silverbullet44/rules.mk index 14f8ec679f..832dcdae3e 100644 --- a/keyboards/silverbullet44/rules.mk +++ b/keyboards/silverbullet44/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = no # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/sirius/uni660/rev1/rules.mk b/keyboards/sirius/uni660/rev1/rules.mk index 03da267c27..8cbb59fb2a 100644 --- a/keyboards/sirius/uni660/rev1/rules.mk +++ b/keyboards/sirius/uni660/rev1/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/sirius/uni660/rev2/rules.mk b/keyboards/sirius/uni660/rev2/rules.mk index ea4f0cdf2c..f22f1f869b 100644 --- a/keyboards/sirius/uni660/rev2/rules.mk +++ b/keyboards/sirius/uni660/rev2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/sirius/unigo66/rules.mk b/keyboards/sirius/unigo66/rules.mk index 45e163c201..23c51b3ac2 100644 --- a/keyboards/sirius/unigo66/rules.mk +++ b/keyboards/sirius/unigo66/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/skeletn87/hotswap/rules.mk b/keyboards/skeletn87/hotswap/rules.mk index f0b40fd4ce..490ca4bb1f 100644 --- a/keyboards/skeletn87/hotswap/rules.mk +++ b/keyboards/skeletn87/hotswap/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/skeletn87/soldered/rules.mk b/keyboards/skeletn87/soldered/rules.mk index 2469ae57e3..dedf9658cf 100644 --- a/keyboards/skeletn87/soldered/rules.mk +++ b/keyboards/skeletn87/soldered/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/skergo/rules.mk b/keyboards/skergo/rules.mk index dffe35fa38..9354e10b87 100644 --- a/keyboards/skergo/rules.mk +++ b/keyboards/skergo/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = usbasploader # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/slz40/rules.mk b/keyboards/slz40/rules.mk index c79f74e34b..9906266f48 100644 --- a/keyboards/slz40/rules.mk +++ b/keyboards/slz40/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/smallice/rules.mk b/keyboards/smallice/rules.mk index 85870d1f74..33e1763375 100644 --- a/keyboards/smallice/rules.mk +++ b/keyboards/smallice/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/smallkeyboard/rules.mk b/keyboards/smallkeyboard/rules.mk index bf7736d00f..a7fab999d6 100644 --- a/keyboards/smallkeyboard/rules.mk +++ b/keyboards/smallkeyboard/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/smk60/rules.mk b/keyboards/smk60/rules.mk index 30872a3c27..b78ba10b0f 100644 --- a/keyboards/smk60/rules.mk +++ b/keyboards/smk60/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/snampad/rules.mk b/keyboards/snampad/rules.mk index f6f0c8516b..487122c026 100644 --- a/keyboards/snampad/rules.mk +++ b/keyboards/snampad/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/sneakbox/aliceclone/rules.mk b/keyboards/sneakbox/aliceclone/rules.mk index 37cfa91d23..7d6d1e8abd 100644 --- a/keyboards/sneakbox/aliceclone/rules.mk +++ b/keyboards/sneakbox/aliceclone/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/sneakbox/ava/rules.mk b/keyboards/sneakbox/ava/rules.mk index 4fec84130c..c28edc9134 100644 --- a/keyboards/sneakbox/ava/rules.mk +++ b/keyboards/sneakbox/ava/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/sneakbox/disarray/ortho/rules.mk b/keyboards/sneakbox/disarray/ortho/rules.mk index d747921e91..baba7d9d86 100644 --- a/keyboards/sneakbox/disarray/ortho/rules.mk +++ b/keyboards/sneakbox/disarray/ortho/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/sneakbox/disarray/staggered/rules.mk b/keyboards/sneakbox/disarray/staggered/rules.mk index d747921e91..baba7d9d86 100644 --- a/keyboards/sneakbox/disarray/staggered/rules.mk +++ b/keyboards/sneakbox/disarray/staggered/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/soup10/rules.mk b/keyboards/soup10/rules.mk index 0fb4610a39..a683e5c39d 100644 --- a/keyboards/soup10/rules.mk +++ b/keyboards/soup10/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/southpole/rules.mk b/keyboards/southpole/rules.mk index c43c083b77..00c8642a66 100644 --- a/keyboards/southpole/rules.mk +++ b/keyboards/southpole/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = halfkay # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/sowbug/68keys/rules.mk b/keyboards/sowbug/68keys/rules.mk index 1f84ebb08c..a2fd3d0310 100644 --- a/keyboards/sowbug/68keys/rules.mk +++ b/keyboards/sowbug/68keys/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32duino # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/sowbug/ansi_tkl/rules.mk b/keyboards/sowbug/ansi_tkl/rules.mk index 1f84ebb08c..a2fd3d0310 100644 --- a/keyboards/sowbug/ansi_tkl/rules.mk +++ b/keyboards/sowbug/ansi_tkl/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32duino # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/soy20/rules.mk b/keyboards/soy20/rules.mk index 2dd235a716..673cc411ad 100644 --- a/keyboards/soy20/rules.mk +++ b/keyboards/soy20/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/space_space/rev1/rules.mk b/keyboards/space_space/rev1/rules.mk index fdbad5fc48..698cce9fb1 100644 --- a/keyboards/space_space/rev1/rules.mk +++ b/keyboards/space_space/rev1/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/space_space/rev2/rules.mk b/keyboards/space_space/rev2/rules.mk index 32bf292746..c1ecc763c5 100644 --- a/keyboards/space_space/rev2/rules.mk +++ b/keyboards/space_space/rev2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/spaceman/pancake/rev1/feather/rules.mk b/keyboards/spaceman/pancake/rev1/feather/rules.mk index a2ddd81a9c..2bf9079970 100644 --- a/keyboards/spaceman/pancake/rev1/feather/rules.mk +++ b/keyboards/spaceman/pancake/rev1/feather/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = caterina # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/spaceman/pancake/rev1/promicro/rules.mk b/keyboards/spaceman/pancake/rev1/promicro/rules.mk index c50dff2f48..4d95e61b42 100644 --- a/keyboards/spaceman/pancake/rev1/promicro/rules.mk +++ b/keyboards/spaceman/pancake/rev1/promicro/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/spaceman/pancake/rev2/rules.mk b/keyboards/spaceman/pancake/rev2/rules.mk index 2e68f3593f..27b9094b57 100644 --- a/keyboards/spaceman/pancake/rev2/rules.mk +++ b/keyboards/spaceman/pancake/rev2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/spaceman/yun65/rules.mk b/keyboards/spaceman/yun65/rules.mk index c635b45e55..a824dac4ae 100644 --- a/keyboards/spaceman/yun65/rules.mk +++ b/keyboards/spaceman/yun65/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/spacey/rules.mk b/keyboards/spacey/rules.mk index c52d9b7eca..baba7d9d86 100644 --- a/keyboards/spacey/rules.mk +++ b/keyboards/spacey/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/sparrow62/rules.mk b/keyboards/sparrow62/rules.mk index 98c686e153..d2af5cf14a 100644 --- a/keyboards/sparrow62/rules.mk +++ b/keyboards/sparrow62/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/specskeys/rules.mk b/keyboards/specskeys/rules.mk index 0f447df522..bec579b641 100644 --- a/keyboards/specskeys/rules.mk +++ b/keyboards/specskeys/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/spiderisland/split78/rules.mk b/keyboards/spiderisland/split78/rules.mk index ba4001497c..e125ff05a3 100644 --- a/keyboards/spiderisland/split78/rules.mk +++ b/keyboards/spiderisland/split78/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = bootloadhid # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/splitish/rules.mk b/keyboards/splitish/rules.mk index 237122cda5..755a4d5d2d 100644 --- a/keyboards/splitish/rules.mk +++ b/keyboards/splitish/rules.mk @@ -4,7 +4,7 @@ MCU = atmega32u4 # Bootloader selection BOOTLOADER = caterina -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/splitkb/kyria/keymaps/drashna/rules.mk b/keyboards/splitkb/kyria/keymaps/drashna/rules.mk index 7c6bd3e121..2f4f4d091f 100644 --- a/keyboards/splitkb/kyria/keymaps/drashna/rules.mk +++ b/keyboards/splitkb/kyria/keymaps/drashna/rules.mk @@ -1,4 +1,4 @@ -BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/splitkb/zima/rules.mk b/keyboards/splitkb/zima/rules.mk index 657475a020..070d4fec9f 100644 --- a/keyboards/splitkb/zima/rules.mk +++ b/keyboards/splitkb/zima/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/splitreus62/rules.mk b/keyboards/splitreus62/rules.mk index b5f2571dc7..e82ed29fc2 100644 --- a/keyboards/splitreus62/rules.mk +++ b/keyboards/splitreus62/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/standaside/rules.mk b/keyboards/standaside/rules.mk index 47037373f4..52bb635940 100644 --- a/keyboards/standaside/rules.mk +++ b/keyboards/standaside/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/stella/rules.mk b/keyboards/stella/rules.mk index 6d598b616b..f9ce5db399 100644 --- a/keyboards/stella/rules.mk +++ b/keyboards/stella/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/stratos/rules.mk b/keyboards/stratos/rules.mk index 59fce3c8ad..152a85dd4d 100644 --- a/keyboards/stratos/rules.mk +++ b/keyboards/stratos/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/studiokestra/cascade/rules.mk b/keyboards/studiokestra/cascade/rules.mk index 8d08446ee2..0acd19e670 100644 --- a/keyboards/studiokestra/cascade/rules.mk +++ b/keyboards/studiokestra/cascade/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/studiokestra/nue/rules.mk b/keyboards/studiokestra/nue/rules.mk index df18dc487e..5c194d1aeb 100644 --- a/keyboards/studiokestra/nue/rules.mk +++ b/keyboards/studiokestra/nue/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/suihankey/rules.mk b/keyboards/suihankey/rules.mk index 2a0566f944..89b68dc07f 100644 --- a/keyboards/suihankey/rules.mk +++ b/keyboards/suihankey/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = no # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/swiftrax/retropad/rules.mk b/keyboards/swiftrax/retropad/rules.mk index 1acfa0949c..700fc37e41 100644 --- a/keyboards/swiftrax/retropad/rules.mk +++ b/keyboards/swiftrax/retropad/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/switchplate/southpaw_65/rules.mk b/keyboards/switchplate/southpaw_65/rules.mk index baade350b0..36287cd37b 100644 --- a/keyboards/switchplate/southpaw_65/rules.mk +++ b/keyboards/switchplate/southpaw_65/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/switchplate/southpaw_fullsize/rules.mk b/keyboards/switchplate/southpaw_fullsize/rules.mk index 39c00d844f..756d8d421d 100644 --- a/keyboards/switchplate/southpaw_fullsize/rules.mk +++ b/keyboards/switchplate/southpaw_fullsize/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/switchplate/switchplate910/rules.mk b/keyboards/switchplate/switchplate910/rules.mk index 0641b5d22e..4f1faaec80 100644 --- a/keyboards/switchplate/switchplate910/rules.mk +++ b/keyboards/switchplate/switchplate910/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/sx60/rules.mk b/keyboards/sx60/rules.mk index a8c067cf0c..1d4118233d 100755 --- a/keyboards/sx60/rules.mk +++ b/keyboards/sx60/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/tada68/keymaps/abishalom/rules.mk b/keyboards/tada68/keymaps/abishalom/rules.mk index b04b98e579..f125bbcdf3 100644 --- a/keyboards/tada68/keymaps/abishalom/rules.mk +++ b/keyboards/tada68/keymaps/abishalom/rules.mk @@ -2,7 +2,7 @@ # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/tada68/keymaps/dlg/rules.mk b/keyboards/tada68/keymaps/dlg/rules.mk index 021059686d..e381f2fdda 100644 --- a/keyboards/tada68/keymaps/dlg/rules.mk +++ b/keyboards/tada68/keymaps/dlg/rules.mk @@ -2,7 +2,7 @@ # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = no # Console for debug(+400) diff --git a/keyboards/takashicompany/endzone34/rules.mk b/keyboards/takashicompany/endzone34/rules.mk index 7c691e47f9..19fb27ff1b 100644 --- a/keyboards/takashicompany/endzone34/rules.mk +++ b/keyboards/takashicompany/endzone34/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/taleguers/taleguers75/rules.mk b/keyboards/taleguers/taleguers75/rules.mk index 377b32a7c1..ebde6cceac 100644 --- a/keyboards/taleguers/taleguers75/rules.mk +++ b/keyboards/taleguers/taleguers75/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/team0110/p1800fl/rules.mk b/keyboards/team0110/p1800fl/rules.mk index 81f481950a..aeff331e7e 100644 --- a/keyboards/team0110/p1800fl/rules.mk +++ b/keyboards/team0110/p1800fl/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/technika/rules.mk b/keyboards/technika/rules.mk index 52e59f74a8..e3015bd416 100644 --- a/keyboards/technika/rules.mk +++ b/keyboards/technika/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/tender/macrowo_pad/rules.mk b/keyboards/tender/macrowo_pad/rules.mk index b4046de018..265cb97514 100644 --- a/keyboards/tender/macrowo_pad/rules.mk +++ b/keyboards/tender/macrowo_pad/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/tenki/rules.mk b/keyboards/tenki/rules.mk index bb94964d6f..8b706cd5e9 100644 --- a/keyboards/tenki/rules.mk +++ b/keyboards/tenki/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/terrazzo/rules.mk b/keyboards/terrazzo/rules.mk index c543106072..c352147d21 100644 --- a/keyboards/terrazzo/rules.mk +++ b/keyboards/terrazzo/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/tgr/alice/rules.mk b/keyboards/tgr/alice/rules.mk index b3194d5324..2a437c3c13 100644 --- a/keyboards/tgr/alice/rules.mk +++ b/keyboards/tgr/alice/rules.mk @@ -5,7 +5,7 @@ MCU = atmega32a BOOTLOADER = bootloadhid # build options -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no EXTRAKEY_ENABLE = yes CONSOLE_ENABLE = no diff --git a/keyboards/the_royal/liminal/rules.mk b/keyboards/the_royal/liminal/rules.mk index aade774c6a..e240497ddc 100644 --- a/keyboards/the_royal/liminal/rules.mk +++ b/keyboards/the_royal/liminal/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # - change yes to no to disable -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/the_royal/schwann/rules.mk b/keyboards/the_royal/schwann/rules.mk index 06faa7f457..ed04528a0d 100644 --- a/keyboards/the_royal/schwann/rules.mk +++ b/keyboards/the_royal/schwann/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/thevankeyboards/bananasplit/rules.mk b/keyboards/thevankeyboards/bananasplit/rules.mk index 459697cb79..095eec2fa0 100644 --- a/keyboards/thevankeyboards/bananasplit/rules.mk +++ b/keyboards/thevankeyboards/bananasplit/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/thevankeyboards/caravan/rules.mk b/keyboards/thevankeyboards/caravan/rules.mk index 66cda91707..0741a01a98 100644 --- a/keyboards/thevankeyboards/caravan/rules.mk +++ b/keyboards/thevankeyboards/caravan/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/thevankeyboards/jetvan/rules.mk b/keyboards/thevankeyboards/jetvan/rules.mk index 596a72d429..3b5a20f343 100644 --- a/keyboards/thevankeyboards/jetvan/rules.mk +++ b/keyboards/thevankeyboards/jetvan/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/thevankeyboards/minivan/rules.mk b/keyboards/thevankeyboards/minivan/rules.mk index b3af99d92b..51a3e08ac2 100644 --- a/keyboards/thevankeyboards/minivan/rules.mk +++ b/keyboards/thevankeyboards/minivan/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/thevankeyboards/roadkit/rules.mk b/keyboards/thevankeyboards/roadkit/rules.mk index 4de3295a9d..11c22872f4 100644 --- a/keyboards/thevankeyboards/roadkit/rules.mk +++ b/keyboards/thevankeyboards/roadkit/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/tiger910/rules.mk b/keyboards/tiger910/rules.mk index 9d0a467da5..b49ff27f8e 100644 --- a/keyboards/tiger910/rules.mk +++ b/keyboards/tiger910/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/tkc/candybar/lefty/rules.mk b/keyboards/tkc/candybar/lefty/rules.mk index 61f8cc6fa9..3244267430 100644 --- a/keyboards/tkc/candybar/lefty/rules.mk +++ b/keyboards/tkc/candybar/lefty/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = stm32-dfu # EXTRAFLAGS+=-flto LTO_ENABLE = yes BACKLIGHT_ENABLE = no -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/tkc/candybar/righty/rules.mk b/keyboards/tkc/candybar/righty/rules.mk index 61f8cc6fa9..3244267430 100644 --- a/keyboards/tkc/candybar/righty/rules.mk +++ b/keyboards/tkc/candybar/righty/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = stm32-dfu # EXTRAFLAGS+=-flto LTO_ENABLE = yes BACKLIGHT_ENABLE = no -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/tkc/godspeed75/rules.mk b/keyboards/tkc/godspeed75/rules.mk index 2df38d2625..bcb4ec9724 100644 --- a/keyboards/tkc/godspeed75/rules.mk +++ b/keyboards/tkc/godspeed75/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/tkc/m0lly/rules.mk b/keyboards/tkc/m0lly/rules.mk index 155fab235b..22cdfb608e 100644 --- a/keyboards/tkc/m0lly/rules.mk +++ b/keyboards/tkc/m0lly/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = qmk-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/tkc/osav2/rules.mk b/keyboards/tkc/osav2/rules.mk index 6a44150852..ae6042f986 100644 --- a/keyboards/tkc/osav2/rules.mk +++ b/keyboards/tkc/osav2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/tkc/portico/rules.mk b/keyboards/tkc/portico/rules.mk index 581d34624f..2e2fb5cffe 100644 --- a/keyboards/tkc/portico/rules.mk +++ b/keyboards/tkc/portico/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/tkc/tkc1800/rules.mk b/keyboards/tkc/tkc1800/rules.mk index d97c861178..7e04b86fca 100644 --- a/keyboards/tkc/tkc1800/rules.mk +++ b/keyboards/tkc/tkc1800/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = qmk-dfu # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/tkc/tkl_ab87/rules.mk b/keyboards/tkc/tkl_ab87/rules.mk index ade3865832..d6b0bdad95 100644 --- a/keyboards/tkc/tkl_ab87/rules.mk +++ b/keyboards/tkc/tkl_ab87/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/tkw/grandiceps/rules.mk b/keyboards/tkw/grandiceps/rules.mk index 08a12d114e..fefbec5076 100644 --- a/keyboards/tkw/grandiceps/rules.mk +++ b/keyboards/tkw/grandiceps/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/tkw/stoutgat/v1/rules.mk b/keyboards/tkw/stoutgat/v1/rules.mk index bd0a85e7de..c74c1b2e24 100644 --- a/keyboards/tkw/stoutgat/v1/rules.mk +++ b/keyboards/tkw/stoutgat/v1/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = usbasploader # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/tkw/stoutgat/v2/rules.mk b/keyboards/tkw/stoutgat/v2/rules.mk index ff24f4f6a5..9de812f283 100644 --- a/keyboards/tkw/stoutgat/v2/rules.mk +++ b/keyboards/tkw/stoutgat/v2/rules.mk @@ -1,7 +1,7 @@ # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite KEYBOARD_SHARED_EP = yes # Free up some extra endpoints - needed if console+mouse+extra MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control diff --git a/keyboards/tmo50/rules.mk b/keyboards/tmo50/rules.mk index c1677dcd9e..4d48dda2cf 100644 --- a/keyboards/tmo50/rules.mk +++ b/keyboards/tmo50/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/tokyokeyboard/alix40/rules.mk b/keyboards/tokyokeyboard/alix40/rules.mk index 7f44c1325c..031e0ef7e1 100644 --- a/keyboards/tokyokeyboard/alix40/rules.mk +++ b/keyboards/tokyokeyboard/alix40/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/tokyokeyboard/tokyo60/rules.mk b/keyboards/tokyokeyboard/tokyo60/rules.mk index 2703c4269f..627e2c7771 100644 --- a/keyboards/tokyokeyboard/tokyo60/rules.mk +++ b/keyboards/tokyokeyboard/tokyo60/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE diff --git a/keyboards/tr60w/rules.mk b/keyboards/tr60w/rules.mk index 81f481950a..aeff331e7e 100644 --- a/keyboards/tr60w/rules.mk +++ b/keyboards/tr60w/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/treasure/type9s2/rules.mk b/keyboards/treasure/type9s2/rules.mk index d2149ad8c2..4f69f205dd 100644 --- a/keyboards/treasure/type9s2/rules.mk +++ b/keyboards/treasure/type9s2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/tszaboo/ortho4exent/rules.mk b/keyboards/tszaboo/ortho4exent/rules.mk index 3525145495..66770322ba 100644 --- a/keyboards/tszaboo/ortho4exent/rules.mk +++ b/keyboards/tszaboo/ortho4exent/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/tunks/ergo33/rules.mk b/keyboards/tunks/ergo33/rules.mk index c509040010..6c02969ec5 100644 --- a/keyboards/tunks/ergo33/rules.mk +++ b/keyboards/tunks/ergo33/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite EXTRAKEY_ENABLE = yes # Audio control and System control MOUSEKEY_ENABLE = yes # Mouse keys COMMAND_ENABLE = no # Commands for debug and configuration diff --git a/keyboards/tw40/rules.mk b/keyboards/tw40/rules.mk index 85870d1f74..33e1763375 100644 --- a/keyboards/tw40/rules.mk +++ b/keyboards/tw40/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/txuu/rules.mk b/keyboards/txuu/rules.mk index 49ec442115..9c78569f93 100644 --- a/keyboards/txuu/rules.mk +++ b/keyboards/txuu/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ua62/rules.mk b/keyboards/ua62/rules.mk index bd712c0982..74a7851e6c 100644 --- a/keyboards/ua62/rules.mk +++ b/keyboards/ua62/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/underscore33/rev1/rules.mk b/keyboards/underscore33/rev1/rules.mk index 49ec442115..9c78569f93 100644 --- a/keyboards/underscore33/rev1/rules.mk +++ b/keyboards/underscore33/rev1/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/underscore33/rev2/rules.mk b/keyboards/underscore33/rev2/rules.mk index 7dd60037e5..40587ac8ae 100644 --- a/keyboards/underscore33/rev2/rules.mk +++ b/keyboards/underscore33/rev2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ungodly/launch_pad/rules.mk b/keyboards/ungodly/launch_pad/rules.mk index 47bfae5cbf..fb7875dfa4 100644 --- a/keyboards/ungodly/launch_pad/rules.mk +++ b/keyboards/ungodly/launch_pad/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ungodly/nines/rules.mk b/keyboards/ungodly/nines/rules.mk index c88c1b4344..ed8f6b6ea4 100644 --- a/keyboards/ungodly/nines/rules.mk +++ b/keyboards/ungodly/nines/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/unicomp/classic_ultracl_post_2013/overnumpad_1xb/rules.mk b/keyboards/unicomp/classic_ultracl_post_2013/overnumpad_1xb/rules.mk index 7837adcbd3..323a834c53 100644 --- a/keyboards/unicomp/classic_ultracl_post_2013/overnumpad_1xb/rules.mk +++ b/keyboards/unicomp/classic_ultracl_post_2013/overnumpad_1xb/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = yes # Enter bootloader mode when holding the ESC key. +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/unicomp/classic_ultracl_pre_2013/overnumpad_1xb/rules.mk b/keyboards/unicomp/classic_ultracl_pre_2013/overnumpad_1xb/rules.mk index 2886985a0d..2e6453ccdf 100644 --- a/keyboards/unicomp/classic_ultracl_pre_2013/overnumpad_1xb/rules.mk +++ b/keyboards/unicomp/classic_ultracl_pre_2013/overnumpad_1xb/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = yes # Enter bootloader mode when holding the ESC key. +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/unicomp/spacesaver_m_post_2013/overnumpad_1xb/rules.mk b/keyboards/unicomp/spacesaver_m_post_2013/overnumpad_1xb/rules.mk index 7837adcbd3..323a834c53 100644 --- a/keyboards/unicomp/spacesaver_m_post_2013/overnumpad_1xb/rules.mk +++ b/keyboards/unicomp/spacesaver_m_post_2013/overnumpad_1xb/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = yes # Enter bootloader mode when holding the ESC key. +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/rules.mk b/keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/rules.mk index 7837adcbd3..323a834c53 100644 --- a/keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/rules.mk +++ b/keyboards/unicomp/spacesaver_m_pre_2013/overnumpad_1xb/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = yes # Enter bootloader mode when holding the ESC key. +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/unison/keymaps/via/rules.mk b/keyboards/unison/keymaps/via/rules.mk index e452e83350..a5832e84ae 100644 --- a/keyboards/unison/keymaps/via/rules.mk +++ b/keyboards/unison/keymaps/via/rules.mk @@ -1,5 +1,5 @@ MOUSEKEY_ENABLE = yes AUDIO_ENABLE = yes -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite VIA_ENABLE = yes diff --git a/keyboards/uno/rules.mk b/keyboards/uno/rules.mk index ba2ecf38c3..6a63c958d3 100644 --- a/keyboards/uno/rules.mk +++ b/keyboards/uno/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ut472/rules.mk b/keyboards/ut472/rules.mk index 23a0730052..1629e40188 100644 --- a/keyboards/ut472/rules.mk +++ b/keyboards/ut472/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/utd80/rules.mk b/keyboards/utd80/rules.mk index dff8d21f97..c8629bd704 100644 --- a/keyboards/utd80/rules.mk +++ b/keyboards/utd80/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/v4n4g0rth0n/v1/rules.mk b/keyboards/v4n4g0rth0n/v1/rules.mk index 3664c9aa97..62be7cc157 100644 --- a/keyboards/v4n4g0rth0n/v1/rules.mk +++ b/keyboards/v4n4g0rth0n/v1/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/v4n4g0rth0n/v2/rules.mk b/keyboards/v4n4g0rth0n/v2/rules.mk index 2581e2f39e..b0b6b8602b 100644 --- a/keyboards/v4n4g0rth0n/v2/rules.mk +++ b/keyboards/v4n4g0rth0n/v2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/vagrant_10/rules.mk b/keyboards/vagrant_10/rules.mk index 4411195da2..9578124554 100755 --- a/keyboards/vagrant_10/rules.mk +++ b/keyboards/vagrant_10/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/viktus/sp111/rules.mk b/keyboards/viktus/sp111/rules.mk index 7036a99cee..3c125ed779 100644 --- a/keyboards/viktus/sp111/rules.mk +++ b/keyboards/viktus/sp111/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/viktus/sp_mini/rules.mk b/keyboards/viktus/sp_mini/rules.mk index 440763ab30..6fb8723aef 100644 --- a/keyboards/viktus/sp_mini/rules.mk +++ b/keyboards/viktus/sp_mini/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/viktus/styrka/rules.mk b/keyboards/viktus/styrka/rules.mk index 1209331901..22f971288e 100644 --- a/keyboards/viktus/styrka/rules.mk +++ b/keyboards/viktus/styrka/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/vn66/rules.mk b/keyboards/vn66/rules.mk index 93397c93bd..671ad04e1c 100644 --- a/keyboards/vn66/rules.mk +++ b/keyboards/vn66/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/waldo/rules.mk b/keyboards/waldo/rules.mk index 2a1bb2cab7..6a802bea0f 100644 --- a/keyboards/waldo/rules.mk +++ b/keyboards/waldo/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = atmel-dfu # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/walletburner/cajal/rules.mk b/keyboards/walletburner/cajal/rules.mk index 58ae98074c..de783b3bd2 100644 --- a/keyboards/walletburner/cajal/rules.mk +++ b/keyboards/walletburner/cajal/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/walletburner/neuron/rules.mk b/keyboards/walletburner/neuron/rules.mk index cd13b1bc52..855e36c3dd 100644 --- a/keyboards/walletburner/neuron/rules.mk +++ b/keyboards/walletburner/neuron/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wekey/we27/rules.mk b/keyboards/wekey/we27/rules.mk index eab090252e..4ba0911ec6 100644 --- a/keyboards/wekey/we27/rules.mk +++ b/keyboards/wekey/we27/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/westfoxtrot/prophet/rules.mk b/keyboards/westfoxtrot/prophet/rules.mk index 85aad7bfdf..668c6bdce6 100644 --- a/keyboards/westfoxtrot/prophet/rules.mk +++ b/keyboards/westfoxtrot/prophet/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/whale/sk/v3/rules.mk b/keyboards/whale/sk/v3/rules.mk index 1d56cd5432..f29c2f1835 100644 --- a/keyboards/whale/sk/v3/rules.mk +++ b/keyboards/whale/sk/v3/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wheatfield/blocked65/rules.mk b/keyboards/wheatfield/blocked65/rules.mk index f0b84d209f..4bc1dcf312 100644 --- a/keyboards/wheatfield/blocked65/rules.mk +++ b/keyboards/wheatfield/blocked65/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/whitefox/keymaps/konstantin/rules.mk b/keyboards/whitefox/keymaps/konstantin/rules.mk index afdeb979e8..db238f1d04 100644 --- a/keyboards/whitefox/keymaps/konstantin/rules.mk +++ b/keyboards/whitefox/keymaps/konstantin/rules.mk @@ -1,5 +1,5 @@ # Generic features -BOOTMAGIC_ENABLE = yes +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite COMMAND_ENABLE = yes CONSOLE_ENABLE = yes EXTRAKEY_ENABLE = yes diff --git a/keyboards/whitefox/rules.mk b/keyboards/whitefox/rules.mk index c25f83f0ca..6faf3e20c3 100644 --- a/keyboards/whitefox/rules.mk +++ b/keyboards/whitefox/rules.mk @@ -14,7 +14,7 @@ BOARD = IC_TEENSY_3_1 # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wilba_tech/rama_works_kara/rules.mk b/keyboards/wilba_tech/rama_works_kara/rules.mk index cb28293758..920708f8b2 100644 --- a/keyboards/wilba_tech/rama_works_kara/rules.mk +++ b/keyboards/wilba_tech/rama_works_kara/rules.mk @@ -12,7 +12,7 @@ OPT_DEFS += -DNO_SUSPEND_POWER_DOWN # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wilba_tech/rama_works_koyu/rules.mk b/keyboards/wilba_tech/rama_works_koyu/rules.mk index 803847b53c..74531d864e 100644 --- a/keyboards/wilba_tech/rama_works_koyu/rules.mk +++ b/keyboards/wilba_tech/rama_works_koyu/rules.mk @@ -13,7 +13,7 @@ OPT_DEFS += -DNO_SUSPEND_POWER_DOWN # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wilba_tech/rama_works_m10_b/rules.mk b/keyboards/wilba_tech/rama_works_m10_b/rules.mk index 0bedbef453..2eb8c5dbde 100644 --- a/keyboards/wilba_tech/rama_works_m10_b/rules.mk +++ b/keyboards/wilba_tech/rama_works_m10_b/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wilba_tech/rama_works_m10_c/rules.mk b/keyboards/wilba_tech/rama_works_m10_c/rules.mk index 24d780ca3b..c98d93e623 100644 --- a/keyboards/wilba_tech/rama_works_m10_c/rules.mk +++ b/keyboards/wilba_tech/rama_works_m10_c/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wilba_tech/rama_works_m50_a/rules.mk b/keyboards/wilba_tech/rama_works_m50_a/rules.mk index 24d780ca3b..c98d93e623 100644 --- a/keyboards/wilba_tech/rama_works_m50_a/rules.mk +++ b/keyboards/wilba_tech/rama_works_m50_a/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wilba_tech/rama_works_m50_ax/rules.mk b/keyboards/wilba_tech/rama_works_m50_ax/rules.mk index c5ba7adeee..1f7b6c1a8d 100644 --- a/keyboards/wilba_tech/rama_works_m50_ax/rules.mk +++ b/keyboards/wilba_tech/rama_works_m50_ax/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wilba_tech/rama_works_m60_a/rules.mk b/keyboards/wilba_tech/rama_works_m60_a/rules.mk index c75ab4e04f..d788e14e2b 100644 --- a/keyboards/wilba_tech/rama_works_m60_a/rules.mk +++ b/keyboards/wilba_tech/rama_works_m60_a/rules.mk @@ -13,7 +13,7 @@ OPT_DEFS += -DNO_SUSPEND_POWER_DOWN # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wilba_tech/rama_works_m65_b/rules.mk b/keyboards/wilba_tech/rama_works_m65_b/rules.mk index 24d780ca3b..c98d93e623 100644 --- a/keyboards/wilba_tech/rama_works_m65_b/rules.mk +++ b/keyboards/wilba_tech/rama_works_m65_b/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wilba_tech/rama_works_m65_bx/rules.mk b/keyboards/wilba_tech/rama_works_m65_bx/rules.mk index 24d780ca3b..c98d93e623 100644 --- a/keyboards/wilba_tech/rama_works_m65_bx/rules.mk +++ b/keyboards/wilba_tech/rama_works_m65_bx/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wilba_tech/rama_works_m6_a/rules.mk b/keyboards/wilba_tech/rama_works_m6_a/rules.mk index 446bf71d47..b2c38b0dcb 100644 --- a/keyboards/wilba_tech/rama_works_m6_a/rules.mk +++ b/keyboards/wilba_tech/rama_works_m6_a/rules.mk @@ -12,7 +12,7 @@ OPT_DEFS += -DNO_SUSPEND_POWER_DOWN # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wilba_tech/rama_works_m6_b/rules.mk b/keyboards/wilba_tech/rama_works_m6_b/rules.mk index d0d63b3dfc..79a0d3f8f6 100644 --- a/keyboards/wilba_tech/rama_works_m6_b/rules.mk +++ b/keyboards/wilba_tech/rama_works_m6_b/rules.mk @@ -12,7 +12,7 @@ OPT_DEFS += -DNO_SUSPEND_POWER_DOWN # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wilba_tech/rama_works_u80_a/rules.mk b/keyboards/wilba_tech/rama_works_u80_a/rules.mk index ceedde0d4e..459738b96a 100644 --- a/keyboards/wilba_tech/rama_works_u80_a/rules.mk +++ b/keyboards/wilba_tech/rama_works_u80_a/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wilba_tech/wt60_a/rules.mk b/keyboards/wilba_tech/wt60_a/rules.mk index 2c07cd045d..9a23a00faa 100644 --- a/keyboards/wilba_tech/wt60_a/rules.mk +++ b/keyboards/wilba_tech/wt60_a/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wilba_tech/wt60_b/rules.mk b/keyboards/wilba_tech/wt60_b/rules.mk index 252739a1a4..7aa382d9ba 100644 --- a/keyboards/wilba_tech/wt60_b/rules.mk +++ b/keyboards/wilba_tech/wt60_b/rules.mk @@ -13,7 +13,7 @@ OPT_DEFS += -DNO_SUSPEND_POWER_DOWN # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wilba_tech/wt60_bx/rules.mk b/keyboards/wilba_tech/wt60_bx/rules.mk index 252739a1a4..7aa382d9ba 100644 --- a/keyboards/wilba_tech/wt60_bx/rules.mk +++ b/keyboards/wilba_tech/wt60_bx/rules.mk @@ -13,7 +13,7 @@ OPT_DEFS += -DNO_SUSPEND_POWER_DOWN # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wilba_tech/wt60_c/rules.mk b/keyboards/wilba_tech/wt60_c/rules.mk index 252739a1a4..7aa382d9ba 100644 --- a/keyboards/wilba_tech/wt60_c/rules.mk +++ b/keyboards/wilba_tech/wt60_c/rules.mk @@ -13,7 +13,7 @@ OPT_DEFS += -DNO_SUSPEND_POWER_DOWN # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wilba_tech/wt60_d/rules.mk b/keyboards/wilba_tech/wt60_d/rules.mk index 0bedbef453..2eb8c5dbde 100644 --- a/keyboards/wilba_tech/wt60_d/rules.mk +++ b/keyboards/wilba_tech/wt60_d/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wilba_tech/wt60_g/rules.mk b/keyboards/wilba_tech/wt60_g/rules.mk index c5ba7adeee..1f7b6c1a8d 100644 --- a/keyboards/wilba_tech/wt60_g/rules.mk +++ b/keyboards/wilba_tech/wt60_g/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wilba_tech/wt60_g2/rules.mk b/keyboards/wilba_tech/wt60_g2/rules.mk index c5ba7adeee..1f7b6c1a8d 100644 --- a/keyboards/wilba_tech/wt60_g2/rules.mk +++ b/keyboards/wilba_tech/wt60_g2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wilba_tech/wt60_h1/rules.mk b/keyboards/wilba_tech/wt60_h1/rules.mk index 941525e8ed..70d226937b 100644 --- a/keyboards/wilba_tech/wt60_h1/rules.mk +++ b/keyboards/wilba_tech/wt60_h1/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wilba_tech/wt60_h2/rules.mk b/keyboards/wilba_tech/wt60_h2/rules.mk index 6a471b03e2..2eb9369659 100644 --- a/keyboards/wilba_tech/wt60_h2/rules.mk +++ b/keyboards/wilba_tech/wt60_h2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wilba_tech/wt60_h3/rules.mk b/keyboards/wilba_tech/wt60_h3/rules.mk index 6a471b03e2..2eb9369659 100644 --- a/keyboards/wilba_tech/wt60_h3/rules.mk +++ b/keyboards/wilba_tech/wt60_h3/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wilba_tech/wt60_xt/rules.mk b/keyboards/wilba_tech/wt60_xt/rules.mk index dde7c27f42..19efed0ace 100644 --- a/keyboards/wilba_tech/wt60_xt/rules.mk +++ b/keyboards/wilba_tech/wt60_xt/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wilba_tech/wt65_a/rules.mk b/keyboards/wilba_tech/wt65_a/rules.mk index 2c07cd045d..9a23a00faa 100644 --- a/keyboards/wilba_tech/wt65_a/rules.mk +++ b/keyboards/wilba_tech/wt65_a/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wilba_tech/wt65_b/rules.mk b/keyboards/wilba_tech/wt65_b/rules.mk index 2c07cd045d..9a23a00faa 100644 --- a/keyboards/wilba_tech/wt65_b/rules.mk +++ b/keyboards/wilba_tech/wt65_b/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wilba_tech/wt65_f/rules.mk b/keyboards/wilba_tech/wt65_f/rules.mk index c5ba7adeee..1f7b6c1a8d 100644 --- a/keyboards/wilba_tech/wt65_f/rules.mk +++ b/keyboards/wilba_tech/wt65_f/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wilba_tech/wt65_fx/rules.mk b/keyboards/wilba_tech/wt65_fx/rules.mk index c5ba7adeee..1f7b6c1a8d 100644 --- a/keyboards/wilba_tech/wt65_fx/rules.mk +++ b/keyboards/wilba_tech/wt65_fx/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wilba_tech/wt65_g/rules.mk b/keyboards/wilba_tech/wt65_g/rules.mk index c5ba7adeee..1f7b6c1a8d 100644 --- a/keyboards/wilba_tech/wt65_g/rules.mk +++ b/keyboards/wilba_tech/wt65_g/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wilba_tech/wt65_g2/rules.mk b/keyboards/wilba_tech/wt65_g2/rules.mk index c5ba7adeee..1f7b6c1a8d 100644 --- a/keyboards/wilba_tech/wt65_g2/rules.mk +++ b/keyboards/wilba_tech/wt65_g2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wilba_tech/wt65_h1/rules.mk b/keyboards/wilba_tech/wt65_h1/rules.mk index 0f097b596a..85e6695828 100644 --- a/keyboards/wilba_tech/wt65_h1/rules.mk +++ b/keyboards/wilba_tech/wt65_h1/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wilba_tech/wt65_xt/rules.mk b/keyboards/wilba_tech/wt65_xt/rules.mk index c5ba7adeee..1f7b6c1a8d 100644 --- a/keyboards/wilba_tech/wt65_xt/rules.mk +++ b/keyboards/wilba_tech/wt65_xt/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wilba_tech/wt65_xtx/rules.mk b/keyboards/wilba_tech/wt65_xtx/rules.mk index c5ba7adeee..1f7b6c1a8d 100644 --- a/keyboards/wilba_tech/wt65_xtx/rules.mk +++ b/keyboards/wilba_tech/wt65_xtx/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wilba_tech/wt69_a/rules.mk b/keyboards/wilba_tech/wt69_a/rules.mk index c70f8cced6..b0c316a58c 100644 --- a/keyboards/wilba_tech/wt69_a/rules.mk +++ b/keyboards/wilba_tech/wt69_a/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wilba_tech/wt70_jb/rules.mk b/keyboards/wilba_tech/wt70_jb/rules.mk index 009828ee33..ddf73ecae9 100644 --- a/keyboards/wilba_tech/wt70_jb/rules.mk +++ b/keyboards/wilba_tech/wt70_jb/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wilba_tech/wt75_a/rules.mk b/keyboards/wilba_tech/wt75_a/rules.mk index 2c07cd045d..9a23a00faa 100644 --- a/keyboards/wilba_tech/wt75_a/rules.mk +++ b/keyboards/wilba_tech/wt75_a/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wilba_tech/wt75_b/rules.mk b/keyboards/wilba_tech/wt75_b/rules.mk index 2c07cd045d..9a23a00faa 100644 --- a/keyboards/wilba_tech/wt75_b/rules.mk +++ b/keyboards/wilba_tech/wt75_b/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wilba_tech/wt75_c/rules.mk b/keyboards/wilba_tech/wt75_c/rules.mk index 2c07cd045d..9a23a00faa 100644 --- a/keyboards/wilba_tech/wt75_c/rules.mk +++ b/keyboards/wilba_tech/wt75_c/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wilba_tech/wt80_a/rules.mk b/keyboards/wilba_tech/wt80_a/rules.mk index 2c07cd045d..9a23a00faa 100644 --- a/keyboards/wilba_tech/wt80_a/rules.mk +++ b/keyboards/wilba_tech/wt80_a/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wilba_tech/wt80_bc/rules.mk b/keyboards/wilba_tech/wt80_bc/rules.mk index da542bd80d..db5a3c88d6 100644 --- a/keyboards/wilba_tech/wt80_bc/rules.mk +++ b/keyboards/wilba_tech/wt80_bc/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wilba_tech/wt80_g/rules.mk b/keyboards/wilba_tech/wt80_g/rules.mk index c5ba7adeee..1f7b6c1a8d 100644 --- a/keyboards/wilba_tech/wt80_g/rules.mk +++ b/keyboards/wilba_tech/wt80_g/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wilba_tech/wt8_a/rules.mk b/keyboards/wilba_tech/wt8_a/rules.mk index c70f8cced6..b0c316a58c 100644 --- a/keyboards/wilba_tech/wt8_a/rules.mk +++ b/keyboards/wilba_tech/wt8_a/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wilba_tech/zeal60/keymaps/sethBarberee/rules.mk b/keyboards/wilba_tech/zeal60/keymaps/sethBarberee/rules.mk index 1fa405e784..0158bb397a 100644 --- a/keyboards/wilba_tech/zeal60/keymaps/sethBarberee/rules.mk +++ b/keyboards/wilba_tech/zeal60/keymaps/sethBarberee/rules.mk @@ -1,2 +1,2 @@ -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite VIA_ENABLE = yes diff --git a/keyboards/wilba_tech/zeal60/rules.mk b/keyboards/wilba_tech/zeal60/rules.mk index 1c385162e5..a8e880eac2 100644 --- a/keyboards/wilba_tech/zeal60/rules.mk +++ b/keyboards/wilba_tech/zeal60/rules.mk @@ -13,7 +13,7 @@ OPT_DEFS += -DNO_SUSPEND_POWER_DOWN # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wilba_tech/zeal65/rules.mk b/keyboards/wilba_tech/zeal65/rules.mk index 846c2d131e..6569c24fed 100644 --- a/keyboards/wilba_tech/zeal65/rules.mk +++ b/keyboards/wilba_tech/zeal65/rules.mk @@ -13,7 +13,7 @@ OPT_DEFS += -DNO_SUSPEND_POWER_DOWN # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wings42/rules.mk b/keyboards/wings42/rules.mk index cbe5beea61..d607ffb581 100644 --- a/keyboards/wings42/rules.mk +++ b/keyboards/wings42/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/winkeyless/bmini/rules.mk b/keyboards/winkeyless/bmini/rules.mk index af36151ccc..694ad609a2 100644 --- a/keyboards/winkeyless/bmini/rules.mk +++ b/keyboards/winkeyless/bmini/rules.mk @@ -5,7 +5,7 @@ MCU = atmega32a BOOTLOADER = bootloadhid # build options -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no EXTRAKEY_ENABLE = yes CONSOLE_ENABLE = no diff --git a/keyboards/winkeyless/bminiex/rules.mk b/keyboards/winkeyless/bminiex/rules.mk index f10c10e85f..f8743893fe 100644 --- a/keyboards/winkeyless/bminiex/rules.mk +++ b/keyboards/winkeyless/bminiex/rules.mk @@ -5,7 +5,7 @@ MCU = atmega32a BOOTLOADER = bootloadhid # build options -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes EXTRAKEY_ENABLE = yes CONSOLE_ENABLE = no diff --git a/keyboards/work_louder/loop/rules.mk b/keyboards/work_louder/loop/rules.mk index 7e3f75e176..0bad9d2d50 100644 --- a/keyboards/work_louder/loop/rules.mk +++ b/keyboards/work_louder/loop/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/work_louder/nano/rules.mk b/keyboards/work_louder/nano/rules.mk index 843d80fe6a..96b79f6288 100644 --- a/keyboards/work_louder/nano/rules.mk +++ b/keyboards/work_louder/nano/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/work_louder/work_board/keymaps/drashna/rules.mk b/keyboards/work_louder/work_board/keymaps/drashna/rules.mk index 6a4558aa0e..363f2d0edb 100644 --- a/keyboards/work_louder/work_board/keymaps/drashna/rules.mk +++ b/keyboards/work_louder/work_board/keymaps/drashna/rules.mk @@ -1,4 +1,4 @@ -BOOTMAGIC_ENABLE = lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite EXTRAKEY_ENABLE = yes TAP_DANCE_ENABLE = no NKRO_ENABLE = yes diff --git a/keyboards/work_louder/work_board/rules.mk b/keyboards/work_louder/work_board/rules.mk index 7ecf7db5dd..1032ca40c0 100644 --- a/keyboards/work_louder/work_board/rules.mk +++ b/keyboards/work_louder/work_board/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wsk/alpha9/rules.mk b/keyboards/wsk/alpha9/rules.mk index 90c3141cf2..7cd5f80392 100644 --- a/keyboards/wsk/alpha9/rules.mk +++ b/keyboards/wsk/alpha9/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wsk/g4m3ralpha/rules.mk b/keyboards/wsk/g4m3ralpha/rules.mk index 90c3141cf2..7cd5f80392 100644 --- a/keyboards/wsk/g4m3ralpha/rules.mk +++ b/keyboards/wsk/g4m3ralpha/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wsk/houndstooth/rules.mk b/keyboards/wsk/houndstooth/rules.mk index fc6bef673f..f114ee6a01 100644 --- a/keyboards/wsk/houndstooth/rules.mk +++ b/keyboards/wsk/houndstooth/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wsk/kodachi50/rules.mk b/keyboards/wsk/kodachi50/rules.mk index 437fc01ecc..5ec96c6110 100644 --- a/keyboards/wsk/kodachi50/rules.mk +++ b/keyboards/wsk/kodachi50/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wsk/pain27/rules.mk b/keyboards/wsk/pain27/rules.mk index cb1b3044fd..9c1964d2d2 100644 --- a/keyboards/wsk/pain27/rules.mk +++ b/keyboards/wsk/pain27/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wsk/sl40/rules.mk b/keyboards/wsk/sl40/rules.mk index 437fc01ecc..5ec96c6110 100644 --- a/keyboards/wsk/sl40/rules.mk +++ b/keyboards/wsk/sl40/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wsk/tkl30/rules.mk b/keyboards/wsk/tkl30/rules.mk index 4411195da2..9578124554 100644 --- a/keyboards/wsk/tkl30/rules.mk +++ b/keyboards/wsk/tkl30/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wuque/ikki68/rules.mk b/keyboards/wuque/ikki68/rules.mk index 42b9a84077..0aa1c57912 100644 --- a/keyboards/wuque/ikki68/rules.mk +++ b/keyboards/wuque/ikki68/rules.mk @@ -9,7 +9,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wuque/ikki68_aurora/rules.mk b/keyboards/wuque/ikki68_aurora/rules.mk index 52e1608e82..f4bf6bce63 100644 --- a/keyboards/wuque/ikki68_aurora/rules.mk +++ b/keyboards/wuque/ikki68_aurora/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/wuque/mammoth20x/rules.mk b/keyboards/wuque/mammoth20x/rules.mk index cba836c456..ebe3ad24c0 100644 --- a/keyboards/wuque/mammoth20x/rules.mk +++ b/keyboards/wuque/mammoth20x/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/wuque/serneity65/rules.mk b/keyboards/wuque/serneity65/rules.mk index 7aaba81e46..3d3efcd480 100644 --- a/keyboards/wuque/serneity65/rules.mk +++ b/keyboards/wuque/serneity65/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/x16/rules.mk b/keyboards/x16/rules.mk index dc7d341bbb..5f180ae00d 100644 --- a/keyboards/x16/rules.mk +++ b/keyboards/x16/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/xbows/knight/rules.mk b/keyboards/xbows/knight/rules.mk index 2ec14e4057..5415374353 100644 --- a/keyboards/xbows/knight/rules.mk +++ b/keyboards/xbows/knight/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/xbows/knight_plus/rules.mk b/keyboards/xbows/knight_plus/rules.mk index 2ec14e4057..5415374353 100644 --- a/keyboards/xbows/knight_plus/rules.mk +++ b/keyboards/xbows/knight_plus/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/xbows/nature/rules.mk b/keyboards/xbows/nature/rules.mk index c3b73b7660..b0cb8fcb61 100644 --- a/keyboards/xbows/nature/rules.mk +++ b/keyboards/xbows/nature/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/xbows/numpad/rules.mk b/keyboards/xbows/numpad/rules.mk index 2ec14e4057..5415374353 100644 --- a/keyboards/xbows/numpad/rules.mk +++ b/keyboards/xbows/numpad/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/xbows/ranger/rules.mk b/keyboards/xbows/ranger/rules.mk index 7eb7792c92..27dc095116 100644 --- a/keyboards/xbows/ranger/rules.mk +++ b/keyboards/xbows/ranger/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/xbows/woody/rules.mk b/keyboards/xbows/woody/rules.mk index 4e27783c80..4161daf2b7 100644 --- a/keyboards/xbows/woody/rules.mk +++ b/keyboards/xbows/woody/rules.mk @@ -3,7 +3,7 @@ MCU = atmega32u4 # Bootloader selection BOOTLOADER = atmel-dfu -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite BACKLIGHT_ENABLE = no MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control diff --git a/keyboards/xelus/akis/rules.mk b/keyboards/xelus/akis/rules.mk index 84ce4080fc..4802a533f1 100644 --- a/keyboards/xelus/akis/rules.mk +++ b/keyboards/xelus/akis/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/xelus/dawn60/rev1/rules.mk b/keyboards/xelus/dawn60/rev1/rules.mk index f82a270f44..caf6e44162 100644 --- a/keyboards/xelus/dawn60/rev1/rules.mk +++ b/keyboards/xelus/dawn60/rev1/rules.mk @@ -12,7 +12,7 @@ OPT_DEFS += -DNO_SUSPEND_POWER_DOWN # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/xelus/dawn60/rev1_qmk/rules.mk b/keyboards/xelus/dawn60/rev1_qmk/rules.mk index bfaea5f495..94ebeb89cc 100644 --- a/keyboards/xelus/dawn60/rev1_qmk/rules.mk +++ b/keyboards/xelus/dawn60/rev1_qmk/rules.mk @@ -12,7 +12,7 @@ OPT_DEFS += -DNO_SUSPEND_POWER_DOWN # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/xelus/dharma/rules.mk b/keyboards/xelus/dharma/rules.mk index 49ec442115..9c78569f93 100644 --- a/keyboards/xelus/dharma/rules.mk +++ b/keyboards/xelus/dharma/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/xelus/kangaroo/rules.mk b/keyboards/xelus/kangaroo/rules.mk index bc2d3ce6df..35ee83cc36 100644 --- a/keyboards/xelus/kangaroo/rules.mk +++ b/keyboards/xelus/kangaroo/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/xelus/ninjin/rules.mk b/keyboards/xelus/ninjin/rules.mk index f979bc72df..1afe6ec557 100644 --- a/keyboards/xelus/ninjin/rules.mk +++ b/keyboards/xelus/ninjin/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/xelus/pachi/mini_32u4/rules.mk b/keyboards/xelus/pachi/mini_32u4/rules.mk index 49ec442115..9c78569f93 100644 --- a/keyboards/xelus/pachi/mini_32u4/rules.mk +++ b/keyboards/xelus/pachi/mini_32u4/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/xelus/pachi/rev1/rules.mk b/keyboards/xelus/pachi/rev1/rules.mk index 2b3cff3b52..770d329cac 100644 --- a/keyboards/xelus/pachi/rev1/rules.mk +++ b/keyboards/xelus/pachi/rev1/rules.mk @@ -10,7 +10,7 @@ OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/xelus/pachi/rgb/rules.mk b/keyboards/xelus/pachi/rgb/rules.mk index 05eac7e959..501060fbd1 100644 --- a/keyboards/xelus/pachi/rgb/rules.mk +++ b/keyboards/xelus/pachi/rgb/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/xelus/rs60/rules.mk b/keyboards/xelus/rs60/rules.mk index 4f87759532..7b919611d1 100644 --- a/keyboards/xelus/rs60/rules.mk +++ b/keyboards/xelus/rs60/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/xelus/snap96/rules.mk b/keyboards/xelus/snap96/rules.mk index 83626597d5..d1f65972c2 100644 --- a/keyboards/xelus/snap96/rules.mk +++ b/keyboards/xelus/snap96/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/xelus/trinityxttkl/rules.mk b/keyboards/xelus/trinityxttkl/rules.mk index e6a55577a5..a9f1397289 100644 --- a/keyboards/xelus/trinityxttkl/rules.mk +++ b/keyboards/xelus/trinityxttkl/rules.mk @@ -11,7 +11,7 @@ DFU_SUFFIX_ARGS = -v FFFF -p FFFF # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/xelus/valor/rev1/rules.mk b/keyboards/xelus/valor/rev1/rules.mk index 4b4bee5b89..383102c0c6 100644 --- a/keyboards/xelus/valor/rev1/rules.mk +++ b/keyboards/xelus/valor/rev1/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/xelus/valor/rev2/rules.mk b/keyboards/xelus/valor/rev2/rules.mk index 59ad94b087..ef41080c42 100644 --- a/keyboards/xelus/valor/rev2/rules.mk +++ b/keyboards/xelus/valor/rev2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/xelus/valor_frl_tkl/rules.mk b/keyboards/xelus/valor_frl_tkl/rules.mk index 8bf172a1f6..649d814696 100644 --- a/keyboards/xelus/valor_frl_tkl/rules.mk +++ b/keyboards/xelus/valor_frl_tkl/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/xiudi/xd004/v1/rules.mk b/keyboards/xiudi/xd004/v1/rules.mk index cc04c57324..b81a68c3b1 100644 --- a/keyboards/xiudi/xd004/v1/rules.mk +++ b/keyboards/xiudi/xd004/v1/rules.mk @@ -5,7 +5,7 @@ MCU = atmega16u2 BOOTLOADER = atmel-dfu # Build Options -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/xiudi/xd60/rev2/rules.mk b/keyboards/xiudi/xd60/rev2/rules.mk index c825de8dbe..e56178d7bf 100644 --- a/keyboards/xiudi/xd60/rev2/rules.mk +++ b/keyboards/xiudi/xd60/rev2/rules.mk @@ -5,7 +5,7 @@ MCU = atmega32u4 BOOTLOADER = atmel-dfu # Build Options -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/xiudi/xd60/rev3/rules.mk b/keyboards/xiudi/xd60/rev3/rules.mk index c825de8dbe..e56178d7bf 100644 --- a/keyboards/xiudi/xd60/rev3/rules.mk +++ b/keyboards/xiudi/xd60/rev3/rules.mk @@ -5,7 +5,7 @@ MCU = atmega32u4 BOOTLOADER = atmel-dfu # Build Options -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/xiudi/xd68/rules.mk b/keyboards/xiudi/xd68/rules.mk index 4310c11206..4e236fdc50 100644 --- a/keyboards/xiudi/xd68/rules.mk +++ b/keyboards/xiudi/xd68/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # QMK Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/xiudi/xd75/keymaps/4sstylz/rules.mk b/keyboards/xiudi/xd75/keymaps/4sstylz/rules.mk index 45ff7b8e8d..4b2777fd21 100644 --- a/keyboards/xiudi/xd75/keymaps/4sstylz/rules.mk +++ b/keyboards/xiudi/xd75/keymaps/4sstylz/rules.mk @@ -17,7 +17,7 @@ COMBO_ENABLE = yes # Enable combo for special function when using multiple k BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/xiudi/xd75/keymaps/buzzlighter1/rules.mk b/keyboards/xiudi/xd75/keymaps/buzzlighter1/rules.mk index d018ebecfa..108a4f6330 100644 --- a/keyboards/xiudi/xd75/keymaps/buzzlighter1/rules.mk +++ b/keyboards/xiudi/xd75/keymaps/buzzlighter1/rules.mk @@ -1,4 +1,4 @@ -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite BACKLIGHT_ENABLE = yes RGBLIGHT_ENABLE = no diff --git a/keyboards/xiudi/xd75/keymaps/fabian/rules.mk b/keyboards/xiudi/xd75/keymaps/fabian/rules.mk index 3ff9b75d30..a494cc8a8e 100644 --- a/keyboards/xiudi/xd75/keymaps/fabian/rules.mk +++ b/keyboards/xiudi/xd75/keymaps/fabian/rules.mk @@ -18,7 +18,7 @@ # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) CONSOLE_ENABLE = no # Console for debug(+400) diff --git a/keyboards/xiudi/xd75/keymaps/revok75/rules.mk b/keyboards/xiudi/xd75/keymaps/revok75/rules.mk index 8011987843..a9aedf5920 100644 --- a/keyboards/xiudi/xd75/keymaps/revok75/rules.mk +++ b/keyboards/xiudi/xd75/keymaps/revok75/rules.mk @@ -13,6 +13,6 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see . -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite BACKLIGHT_ENABLE = yes RGBLIGHT_ENABLE = yes diff --git a/keyboards/xiudi/xd75/rules.mk b/keyboards/xiudi/xd75/rules.mk index 9e10e4bfa8..171f71b827 100644 --- a/keyboards/xiudi/xd75/rules.mk +++ b/keyboards/xiudi/xd75/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/xiudi/xd84/rules.mk b/keyboards/xiudi/xd84/rules.mk index 54809bc998..a7aeeed6b7 100644 --- a/keyboards/xiudi/xd84/rules.mk +++ b/keyboards/xiudi/xd84/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/xiudi/xd84pro/rules.mk b/keyboards/xiudi/xd84pro/rules.mk index 8c38fcbb55..e70a8a7a73 100644 --- a/keyboards/xiudi/xd84pro/rules.mk +++ b/keyboards/xiudi/xd84pro/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/xiudi/xd87/keymaps/default_underglow/rules.mk b/keyboards/xiudi/xd87/keymaps/default_underglow/rules.mk index 8d4da89e39..fa5f343e70 100755 --- a/keyboards/xiudi/xd87/keymaps/default_underglow/rules.mk +++ b/keyboards/xiudi/xd87/keymaps/default_underglow/rules.mk @@ -1,3 +1,3 @@ -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite COMMAND_ENABLE = no RGBLIGHT_ENABLE = yes diff --git a/keyboards/xiudi/xd87/keymaps/mac_underglow/rules.mk b/keyboards/xiudi/xd87/keymaps/mac_underglow/rules.mk index 8d4da89e39..fa5f343e70 100755 --- a/keyboards/xiudi/xd87/keymaps/mac_underglow/rules.mk +++ b/keyboards/xiudi/xd87/keymaps/mac_underglow/rules.mk @@ -1,3 +1,3 @@ -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite COMMAND_ENABLE = no RGBLIGHT_ENABLE = yes diff --git a/keyboards/xiudi/xd87/rules.mk b/keyboards/xiudi/xd87/rules.mk index 5fb8c67600..900071f1c6 100644 --- a/keyboards/xiudi/xd87/rules.mk +++ b/keyboards/xiudi/xd87/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/xiudi/xd96/rules.mk b/keyboards/xiudi/xd96/rules.mk index baade350b0..36287cd37b 100644 --- a/keyboards/xiudi/xd96/rules.mk +++ b/keyboards/xiudi/xd96/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/xw60/rules.mk b/keyboards/xw60/rules.mk index fc192e0593..996e630455 100644 --- a/keyboards/xw60/rules.mk +++ b/keyboards/xw60/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = atmel-dfu # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = no # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/yasui/rules.mk b/keyboards/yasui/rules.mk index b004c534bb..e912b1df7f 100644 --- a/keyboards/yasui/rules.mk +++ b/keyboards/yasui/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/yatara/drink_me/rules.mk b/keyboards/yatara/drink_me/rules.mk index ec3729d115..61b03c131d 100644 --- a/keyboards/yatara/drink_me/rules.mk +++ b/keyboards/yatara/drink_me/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = no # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/yd60mq/rules.mk b/keyboards/yd60mq/rules.mk index 280751e609..8fec082094 100644 --- a/keyboards/yd60mq/rules.mk +++ b/keyboards/yd60mq/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ymd75/rev1/rules.mk b/keyboards/ymd75/rev1/rules.mk index 130203f63d..e2b35d63fa 100644 --- a/keyboards/ymd75/rev1/rules.mk +++ b/keyboards/ymd75/rev1/rules.mk @@ -5,7 +5,7 @@ MCU = atmega32a BOOTLOADER = bootloadhid # build options -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no EXTRAKEY_ENABLE = yes CONSOLE_ENABLE = no diff --git a/keyboards/ymd75/rev2/rules.mk b/keyboards/ymd75/rev2/rules.mk index 130203f63d..e2b35d63fa 100644 --- a/keyboards/ymd75/rev2/rules.mk +++ b/keyboards/ymd75/rev2/rules.mk @@ -5,7 +5,7 @@ MCU = atmega32a BOOTLOADER = bootloadhid # build options -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no EXTRAKEY_ENABLE = yes CONSOLE_ENABLE = no diff --git a/keyboards/ymd75/rev3/rules.mk b/keyboards/ymd75/rev3/rules.mk index a37c1473ee..fbab065d48 100644 --- a/keyboards/ymd75/rev3/rules.mk +++ b/keyboards/ymd75/rev3/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ymdk/np24/u4rgb6/rules.mk b/keyboards/ymdk/np24/u4rgb6/rules.mk index 260daf07db..fdbf3c60e7 100644 --- a/keyboards/ymdk/np24/u4rgb6/rules.mk +++ b/keyboards/ymdk/np24/u4rgb6/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ymdk/sp64/rules.mk b/keyboards/ymdk/sp64/rules.mk index 77ec305d51..d2c74bbe09 100644 --- a/keyboards/ymdk/sp64/rules.mk +++ b/keyboards/ymdk/sp64/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = bootloadhid # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ymdk/wings/rules.mk b/keyboards/ymdk/wings/rules.mk index f88a26d4c9..bf9ede20bd 100644 --- a/keyboards/ymdk/wings/rules.mk +++ b/keyboards/ymdk/wings/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ymdk/wingshs/rules.mk b/keyboards/ymdk/wingshs/rules.mk index 6ff132876e..bf9ede20bd 100644 --- a/keyboards/ymdk/wingshs/rules.mk +++ b/keyboards/ymdk/wingshs/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ymdk/ym68/rules.mk b/keyboards/ymdk/ym68/rules.mk index dbdd274123..1a2408fb70 100644 --- a/keyboards/ymdk/ym68/rules.mk +++ b/keyboards/ymdk/ym68/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ymdk/ymd09/rules.mk b/keyboards/ymdk/ymd09/rules.mk index 8a43e9d186..ff96ae2fa9 100644 --- a/keyboards/ymdk/ymd09/rules.mk +++ b/keyboards/ymdk/ymd09/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ymdk/ymd40/v2/rules.mk b/keyboards/ymdk/ymd40/v2/rules.mk index 847728b043..449f2d14cc 100644 --- a/keyboards/ymdk/ymd40/v2/rules.mk +++ b/keyboards/ymdk/ymd40/v2/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ymdk/ymd67/rules.mk b/keyboards/ymdk/ymd67/rules.mk index 13bd7ff27f..92d0c70aa1 100644 --- a/keyboards/ymdk/ymd67/rules.mk +++ b/keyboards/ymdk/ymd67/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ymdk_np21/rules.mk b/keyboards/ymdk_np21/rules.mk index 54b2cbb154..611a7935c1 100644 --- a/keyboards/ymdk_np21/rules.mk +++ b/keyboards/ymdk_np21/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = bootloadhid # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/yncognito/batpad/rules.mk b/keyboards/yncognito/batpad/rules.mk index ab2800ba34..0f6abaa263 100644 --- a/keyboards/yncognito/batpad/rules.mk +++ b/keyboards/yncognito/batpad/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/yoichiro/lunakey_macro/rules.mk b/keyboards/yoichiro/lunakey_macro/rules.mk index 5e2b08db0c..419033f64c 100644 --- a/keyboards/yoichiro/lunakey_macro/rules.mk +++ b/keyboards/yoichiro/lunakey_macro/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = no # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/yoichiro/lunakey_mini/rules.mk b/keyboards/yoichiro/lunakey_mini/rules.mk index b35ad05846..62691dc4f2 100644 --- a/keyboards/yoichiro/lunakey_mini/rules.mk +++ b/keyboards/yoichiro/lunakey_mini/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/yugo_m/model_m_101/rules.mk b/keyboards/yugo_m/model_m_101/rules.mk index a83750932a..41e7e023ff 100644 --- a/keyboards/yugo_m/model_m_101/rules.mk +++ b/keyboards/yugo_m/model_m_101/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/yushakobo/quick7/rules.mk b/keyboards/yushakobo/quick7/rules.mk index 9813e7659f..0d700a132e 100644 --- a/keyboards/yushakobo/quick7/rules.mk +++ b/keyboards/yushakobo/quick7/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = yes # Console for debug diff --git a/keyboards/yynmt/acperience12/rules.mk b/keyboards/yynmt/acperience12/rules.mk index 02f70ba358..274a17b4f8 100644 --- a/keyboards/yynmt/acperience12/rules.mk +++ b/keyboards/yynmt/acperience12/rules.mk @@ -1,7 +1,7 @@ # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/z12/rules.mk b/keyboards/z12/rules.mk index 32cdab8e95..b59ce00b47 100644 --- a/keyboards/z12/rules.mk +++ b/keyboards/z12/rules.mk @@ -5,7 +5,7 @@ MCU = atmega32u4 BOOTLOADER = caterina # Build Options -BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/z150_bh/rules.mk b/keyboards/z150_bh/rules.mk index 635cab9537..5d9c83a5a2 100644 --- a/keyboards/z150_bh/rules.mk +++ b/keyboards/z150_bh/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = halfkay # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/z34/rules.mk b/keyboards/z34/rules.mk index 6370c7a93f..cec101f931 100644 --- a/keyboards/z34/rules.mk +++ b/keyboards/z34/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = caterina # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/zj68/rules.mk b/keyboards/zj68/rules.mk index 712ad0a497..e6224a1049 100644 --- a/keyboards/zj68/rules.mk +++ b/keyboards/zj68/rules.mk @@ -8,7 +8,7 @@ BOOTLOADER = atmel-dfu # comment out to disable the options. # BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/zlant/rules.mk b/keyboards/zlant/rules.mk index d53de8978f..4ed89a93f0 100755 --- a/keyboards/zlant/rules.mk +++ b/keyboards/zlant/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # comment out to disable the options. # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/zoo/wampus/rules.mk b/keyboards/zoo/wampus/rules.mk index 11fc79f0fa..08c35a116c 100644 --- a/keyboards/zoo/wampus/rules.mk +++ b/keyboards/zoo/wampus/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ztboards/after/rules.mk b/keyboards/ztboards/after/rules.mk index 3535a6619b..0f03cb3530 100644 --- a/keyboards/ztboards/after/rules.mk +++ b/keyboards/ztboards/after/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/ztboards/noon/rules.mk b/keyboards/ztboards/noon/rules.mk index 49ec442115..9c78569f93 100644 --- a/keyboards/ztboards/noon/rules.mk +++ b/keyboards/ztboards/noon/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/zvecr/split_blackpill/rules.mk b/keyboards/zvecr/split_blackpill/rules.mk index ae2d38186c..86469ce190 100644 --- a/keyboards/zvecr/split_blackpill/rules.mk +++ b/keyboards/zvecr/split_blackpill/rules.mk @@ -7,7 +7,7 @@ BOOTLOADER = stm32duino # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/keyboards/zvecr/zv48/rules.mk b/keyboards/zvecr/zv48/rules.mk index ac7eebbce3..97238e5e07 100644 --- a/keyboards/zvecr/zv48/rules.mk +++ b/keyboards/zvecr/zv48/rules.mk @@ -1,7 +1,7 @@ # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite KEYBOARD_SHARED_EP = yes # Free up some extra endpoints - needed if console+mouse+extra MOUSEKEY_ENABLE = yes # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control diff --git a/layouts/community/ergodox/drashna/rules.mk b/layouts/community/ergodox/drashna/rules.mk index 4c47e07133..853f1efd24 100644 --- a/layouts/community/ergodox/drashna/rules.mk +++ b/layouts/community/ergodox/drashna/rules.mk @@ -1,4 +1,4 @@ -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite TAP_DANCE_ENABLE = no COMMAND_ENABLE = no # Commands for debug and configuration CONSOLE_ENABLE = no diff --git a/layouts/community/ergodox/jjerrell/rules.mk b/layouts/community/ergodox/jjerrell/rules.mk index 4288a264c6..6f3150d7d4 100644 --- a/layouts/community/ergodox/jjerrell/rules.mk +++ b/layouts/community/ergodox/jjerrell/rules.mk @@ -1,4 +1,4 @@ -BOOTMAGIC_ENABLE = lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite TAP_DANCE_ENABLE = no COMMAND_ENABLE = no CONSOLE_ENABLE = yes diff --git a/layouts/community/numpad_5x6/bjohnson/rules.mk b/layouts/community/numpad_5x6/bjohnson/rules.mk index d85826165c..b54c78f39b 100644 --- a/layouts/community/numpad_5x6/bjohnson/rules.mk +++ b/layouts/community/numpad_5x6/bjohnson/rules.mk @@ -2,4 +2,4 @@ AUDIO_ENABLE = no RGBLIGHT_ENABLE = yes BACKLIGHT_ENABLE = no NO_SECRETS = yes -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite diff --git a/layouts/community/numpad_5x6/drashna/rules.mk b/layouts/community/numpad_5x6/drashna/rules.mk index f4854716b4..a2a2b7f8f1 100644 --- a/layouts/community/numpad_5x6/drashna/rules.mk +++ b/layouts/community/numpad_5x6/drashna/rules.mk @@ -2,7 +2,7 @@ AUDIO_ENABLE = no RGBLIGHT_ENABLE = yes BACKLIGHT_ENABLE = no NO_SECRETS = yes -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite INDICATOR_LIGHTS = no MAKE_BOOTLOADER = yes RGBLIGHT_STARTUP_ANIMATION = yes diff --git a/layouts/community/ortho_4x12/brandonschlack/rules.mk b/layouts/community/ortho_4x12/brandonschlack/rules.mk index d27ef6420d..0c4b14a4e5 100644 --- a/layouts/community/ortho_4x12/brandonschlack/rules.mk +++ b/layouts/community/ortho_4x12/brandonschlack/rules.mk @@ -6,5 +6,5 @@ MOUSEKEY_ENABLE = yes # Mouse keys(+4700) BACKLIGHT_ENABLE = no # No backlights installed ifeq ($(strip $(KEYBOARD)), jnao) - BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite + BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite endif diff --git a/layouts/community/ortho_4x12/drashna/rules.mk b/layouts/community/ortho_4x12/drashna/rules.mk index 8c3e126636..d766245260 100644 --- a/layouts/community/ortho_4x12/drashna/rules.mk +++ b/layouts/community/ortho_4x12/drashna/rules.mk @@ -1,4 +1,4 @@ -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys(+4700) EXTRAKEY_ENABLE = yes # Audio control and System control(+450) TAP_DANCE_ENABLE = no diff --git a/layouts/community/ortho_4x12/jjerrell/rules.mk b/layouts/community/ortho_4x12/jjerrell/rules.mk index 39f31a266e..9b1b8e8915 100644 --- a/layouts/community/ortho_4x12/jjerrell/rules.mk +++ b/layouts/community/ortho_4x12/jjerrell/rules.mk @@ -1,6 +1,6 @@ SRC += muse.c -BOOTMAGIC_ENABLE = lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no EXTRAKEY_ENABLE = yes TAP_DANCE_ENABLE = no diff --git a/layouts/community/ortho_5x12/brandonschlack/rules.mk b/layouts/community/ortho_5x12/brandonschlack/rules.mk index 0035209d35..a727043b44 100644 --- a/layouts/community/ortho_5x12/brandonschlack/rules.mk +++ b/layouts/community/ortho_5x12/brandonschlack/rules.mk @@ -6,5 +6,5 @@ MOUSEKEY_ENABLE = yes # Mouse keys(+4700) BACKLIGHT_ENABLE = no # No backlights installed ifeq ($(strip $(KEYBOARD)), jnao) - BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite + BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite endif diff --git a/layouts/community/split_3x6_3/drashna/rules.mk b/layouts/community/split_3x6_3/drashna/rules.mk index 3a8a771ee1..2238b57015 100644 --- a/layouts/community/split_3x6_3/drashna/rules.mk +++ b/layouts/community/split_3x6_3/drashna/rules.mk @@ -3,7 +3,7 @@ # change to "no" to disable the options, or define them in the Makefile in # the appropriate keymap folder that will get included automatically # -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug diff --git a/lib/python/qmk/cli/generate/rules_mk.py b/lib/python/qmk/cli/generate/rules_mk.py index dcaff29fae..5d8d7cc8a7 100755 --- a/lib/python/qmk/cli/generate/rules_mk.py +++ b/lib/python/qmk/cli/generate/rules_mk.py @@ -67,12 +67,9 @@ def generate_rules_mk(cli): # Iterate through features to enable/disable them if 'features' in kb_info_json: for feature, enabled in kb_info_json['features'].items(): - if feature == 'bootmagic_lite' and enabled: - rules_mk_lines.append('BOOTMAGIC_ENABLE ?= lite') - else: - feature = feature.upper() - enabled = 'yes' if enabled else 'no' - rules_mk_lines.append(f'{feature}_ENABLE ?= {enabled}') + feature = feature.upper() + enabled = 'yes' if enabled else 'no' + rules_mk_lines.append(f'{feature}_ENABLE ?= {enabled}') # Set SPLIT_TRANSPORT, if needed if kb_info_json.get('split', {}).get('transport', {}).get('protocol') == 'custom': diff --git a/users/bcat/rules.mk b/users/bcat/rules.mk index 651ee96fe0..12c9a89bf4 100644 --- a/users/bcat/rules.mk +++ b/users/bcat/rules.mk @@ -1,7 +1,7 @@ SRC += bcat.c # Enable Bootmagic Lite to consistently reset to bootloader and clear EEPROM. -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite # Enable media keys on all keyboards. EXTRAKEY_ENABLE = yes diff --git a/users/nstickney/rules.mk b/users/nstickney/rules.mk index 6b3671ddb8..cad245cc24 100644 --- a/users/nstickney/rules.mk +++ b/users/nstickney/rules.mk @@ -26,7 +26,7 @@ LTO_ENABLE = yes # https://beta.docs.qmk.fm/developing-qmk/qmk-reference/getting_started_make_guide#rules-mk-options AUDIO_ENABLE = no -BOOTMAGIC_ENABLE = no +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite COMMAND_ENABLE = no CONSOLE_ENABLE = no MOUSEKEY_ENABLE = no diff --git a/users/ridingqwerty/rules.mk b/users/ridingqwerty/rules.mk index 93b88068ed..cc53f3f53e 100644 --- a/users/ridingqwerty/rules.mk +++ b/users/ridingqwerty/rules.mk @@ -1,7 +1,7 @@ SRC += ridingqwerty.c \ process_records.c -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite CONSOLE_ENABLE = no COMMAND_ENABLE = no UNICODE_ENABLE = no # "yes" in Atreus default keymap, blocking UNICODEMAP_ENABLE diff --git a/users/spidey3/rules.mk b/users/spidey3/rules.mk index 69327038b7..de8ed113e7 100644 --- a/users/spidey3/rules.mk +++ b/users/spidey3/rules.mk @@ -1,4 +1,4 @@ -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite CONSOLE_ENABLE = yes # Console for debug BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality LTO_ENABLE = yes diff --git a/users/talljoe/rules.mk b/users/talljoe/rules.mk index 632e725b71..9338568b97 100644 --- a/users/talljoe/rules.mk +++ b/users/talljoe/rules.mk @@ -13,4 +13,4 @@ TAP_DANCE_ENABLE=yes CONSOLE_ENABLE=no COMMAND_ENABLE=no DYNAMIC_KEYMAP_ENABLE=no -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite diff --git a/users/tominabox1/rules.mk b/users/tominabox1/rules.mk index 160dcce7b9..1df5634640 100644 --- a/users/tominabox1/rules.mk +++ b/users/tominabox1/rules.mk @@ -5,7 +5,7 @@ CONSOLE_ENABLE = no TAP_DANCE_ENABLE = yes NKRO_ENABLE = yes -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite ifeq ($(strip $(KEYBOARD)), crkbd/rev1) RGB_MATRIX_ENABLE = yes diff --git a/users/yanfali/rules.mk b/users/yanfali/rules.mk index 631dda4fb3..6c0c48c764 100644 --- a/users/yanfali/rules.mk +++ b/users/yanfali/rules.mk @@ -1,4 +1,4 @@ -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite DYNAMIC_KEYMAP_ENABLE = no LTO_ENABLE = yes AUDIO_ENABLE = no From c8b09d0d4ab73c88c6ae84718f0c890640dfbece Mon Sep 17 00:00:00 2001 From: Erovia Date: Thu, 4 Nov 2021 21:21:09 +0000 Subject: [PATCH 424/595] CLI: Add 'cd' subcommand (#12584) * CLI: Add 'cd' subcommand Go to your qmk_firmware dir with ease. * Fix for Windows and do not run if already under QMK Home * Make flake8 happy * Fix prompt for Windows * Make flake8 happy once again * I'll get it right eventually * Apply suggestions from code review Co-authored-by: Ryan * Add subcommand to __init__.py and fixup after rebase * Update Windows code to use milc's run * Unify the subshell starting with os.execl * Exit with error msg when output is redirected to non-TTY. * Revert Windows-specific code Co-authored-by: Ryan --- docs/cli_commands.md | 14 +++++++++++ lib/python/qmk/cli/__init__.py | 1 + lib/python/qmk/cli/cd.py | 46 ++++++++++++++++++++++++++++++++++ 3 files changed, 61 insertions(+) create mode 100755 lib/python/qmk/cli/cd.py diff --git a/docs/cli_commands.md b/docs/cli_commands.md index e498f3b22e..8f5117633f 100644 --- a/docs/cli_commands.md +++ b/docs/cli_commands.md @@ -118,6 +118,20 @@ This command lets you configure the behavior of QMK. For the full `qmk config` d qmk config [-ro] [config_token1] [config_token2] [...] [config_tokenN] ``` +## `qmk cd` + +This command opens a new shell in your `qmk_firmware` directory. + +Note that if you are already somewhere within `QMK_HOME` (for example, the `keyboards/` folder), nothing will happen. + +To exit out into the parent shell, simply type `exit`. + +**Usage**: + +``` +qmk cd +``` + ## `qmk console` This command lets you connect to keyboard consoles to get debugging messages. It only works if your keyboard firmware has been compiled with `CONSOLE_ENABLE=yes`. diff --git a/lib/python/qmk/cli/__init__.py b/lib/python/qmk/cli/__init__.py index 539d03e2fc..ea961315bd 100644 --- a/lib/python/qmk/cli/__init__.py +++ b/lib/python/qmk/cli/__init__.py @@ -31,6 +31,7 @@ safe_commands = [ subcommands = [ 'qmk.cli.bux', 'qmk.cli.c2json', + 'qmk.cli.cd', 'qmk.cli.cformat', 'qmk.cli.chibios.confmigrate', 'qmk.cli.clean', diff --git a/lib/python/qmk/cli/cd.py b/lib/python/qmk/cli/cd.py new file mode 100755 index 0000000000..c62c3f56c6 --- /dev/null +++ b/lib/python/qmk/cli/cd.py @@ -0,0 +1,46 @@ +"""Open a shell in the QMK Home directory +""" +import sys +import os + +from milc import cli + +from qmk.path import under_qmk_firmware + + +@cli.subcommand('Go to QMK Home') +def cd(cli): + """Go to QMK Home + """ + if not sys.stdout.isatty(): + cli.log.error("This command is for interactive usage only. For non-interactive usage, 'cd $(qmk env QMK_HOME)' is more robust.") + sys.exit(1) + + if not under_qmk_firmware(): + # Only do anything if the user is not under qmk_firmware already + # in order to reduce the possibility of starting multiple shells + cli.log.info("Spawning a subshell in your QMK_HOME directory.") + cli.log.info("Type 'exit' to get back to the parent shell.") + if not cli.platform.lower().startswith('windows'): + # For Linux/Mac/etc + # Check the user's login shell from 'passwd' + # alternatively fall back to $SHELL env var + # and finally to '/bin/bash'. + import getpass + import pwd + shell = pwd.getpwnam(getpass.getuser()).pw_shell + if not shell: + shell = os.environ.get('SHELL', '/bin/bash') + # Start the new subshell + os.execl(shell, shell) + else: + # For Windows + # Check the $SHELL env var + # and fall back to '/usr/bin/bash'. + qmk_env = os.environ.copy() + # Set the prompt for the new shell + qmk_env['MSYS2_PS1'] = qmk_env['PS1'] + # Start the new subshell + cli.run([os.environ.get('SHELL', '/usr/bin/bash')], env=qmk_env) + else: + cli.log.info("Already within qmk_firmware directory.") From c8da63382c7d2cc0de13559c10b5fde0f436f9e3 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Fri, 5 Nov 2021 08:49:09 +1100 Subject: [PATCH 425/595] Fixup actions. (#15057) --- lib/python/qmk/info.py | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/lib/python/qmk/info.py b/lib/python/qmk/info.py index 85131b9299..cc99484519 100644 --- a/lib/python/qmk/info.py +++ b/lib/python/qmk/info.py @@ -25,6 +25,13 @@ def _valid_community_layout(layout): return (Path('layouts/default') / layout).exists() +def _remove_newlines_from_labels(layouts): + for layout_name, layout_json in layouts.items(): + for key in layout_json['layout']: + if '\n' in key['label']: + key['label'] = key['label'].split('\n')[0] + + def info_json(keyboard): """Generate the info.json data for a specific keyboard. """ @@ -100,10 +107,7 @@ def info_json(keyboard): _check_matrix(info_data) # Remove newline characters from layout labels - for layout_name, layout_json in layouts.items(): - for key in layout_json['layout']: - if '\n' in key['label']: - key['label'] = key['label'].split('\n')[0] + _remove_newlines_from_labels(layouts) return info_data From 45b35e6ea13d8c184d9cbd23e4bd3868e66d2933 Mon Sep 17 00:00:00 2001 From: mechlovin <57231893+mechlovin@users.noreply.github.com> Date: Fri, 5 Nov 2021 05:08:40 +0700 Subject: [PATCH 426/595] [Keyboard] Update Infinity87 rev. 2 (#14820) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- keyboards/mechlovin/infinity87/rev2/config.h | 46 ++- keyboards/mechlovin/infinity87/rev2/info.json | 4 +- keyboards/mechlovin/infinity87/rev2/matrix.c | 344 ++++++++---------- keyboards/mechlovin/infinity87/rev2/readme.md | 4 +- keyboards/mechlovin/infinity87/rev2/rev2.c | 38 +- keyboards/mechlovin/infinity87/rev2/rules.mk | 11 +- 6 files changed, 192 insertions(+), 255 deletions(-) diff --git a/keyboards/mechlovin/infinity87/rev2/config.h b/keyboards/mechlovin/infinity87/rev2/config.h index 1be7f0a1bb..ddf9df4593 100644 --- a/keyboards/mechlovin/infinity87/rev2/config.h +++ b/keyboards/mechlovin/infinity87/rev2/config.h @@ -18,7 +18,7 @@ #define PRODUCT_ID 0x8702 #define DEVICE_VER 0x0001 -#define PRODUCT Infinity 87 rev2 +#define PRODUCT Infinity87 rev.2 /* * Keyboard Matrix Assignments @@ -30,19 +30,49 @@ * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) * */ -#define MATRIX_ROW_PINS { A3, D5, C3, C2, B3, B4 } +#define MATRIX_ROW_PINS { D5, D2, D4, D3, D0, D1 } #define UNUSED_PINS /* COL2ROW, ROW2COL*/ #define DIODE_DIRECTION ROW2COL -#define BACKLIGHT_PIN D4 +#define USB_POLLING_INTERVAL_MS 1 + + +#define LED_NUM_LOCK_PIN D7 +#define LED_CAPS_LOCK_PIN D6 +#define LED_SCROLL_LOCK_PIN B4 +#define LED_PIN_ON_STATE 1 + +#define BACKLIGHT_PIN B6 +#define BACKLIGHT_LEVELS 3 #define BACKLIGHT_BREATHING -#define LED_NUM_LOCK_PIN B1 -#define LED_CAPS_LOCK_PIN B0 -#define LED_SCROLL_LOCK_PIN B2 -#define LED_PIN_ON_STATE 0 +#ifdef RGBLIGHT_ENABLE +#define RGB_DI_PIN E2 +#define RGBLED_NUM 24 +#define RGBLIGHT_HUE_STEP 8 +#define RGBLIGHT_SAT_STEP 8 +#define RGBLIGHT_VAL_STEP 8 +#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE +/*== customize breathing effect ==*/ +/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +/*==== use exp() and sin() ====*/ +//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +#endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ -#define DEBOUNCE 5 \ No newline at end of file +#define DEBOUNCE 5 diff --git a/keyboards/mechlovin/infinity87/rev2/info.json b/keyboards/mechlovin/infinity87/rev2/info.json index da67c40c39..fa6073912c 100644 --- a/keyboards/mechlovin/infinity87/rev2/info.json +++ b/keyboards/mechlovin/infinity87/rev2/info.json @@ -1,7 +1,7 @@ { - "keyboard_name": "infinity87", + "keyboard_name": "infinity87 Rev.2", "url": "", - "maintainer": "Team Mechlovin'", + "maintainer": "Mechlovin' Studio", "layouts": { "LAYOUT_all": { "layout": [ diff --git a/keyboards/mechlovin/infinity87/rev2/matrix.c b/keyboards/mechlovin/infinity87/rev2/matrix.c index 6f417765aa..b1b0d20654 100644 --- a/keyboards/mechlovin/infinity87/rev2/matrix.c +++ b/keyboards/mechlovin/infinity87/rev2/matrix.c @@ -60,61 +60,12 @@ static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) return (last_row_value != current_matrix[current_row]); } -#elif (DIODE_DIRECTION == COL2ROW) - -static void select_row(uint8_t row) { - setPinOutput(row_pins[row]); - writePinLow(row_pins[row]); -} - -static void unselect_row(uint8_t row) { setPinInputHigh(row_pins[row]); } - -static void unselect_rows(void) { - for (uint8_t x = 0; x < MATRIX_ROWS; x++) { - setPinInputHigh(row_pins[x]); - } -} - -static void init_pins(void) { - unselect_rows(); - for (uint8_t x = 0; x < MATRIX_COLS; x++) { - setPinInputHigh(col_pins[x]); - } -} - -static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) { - // Store last value of row prior to reading - matrix_row_t last_row_value = current_matrix[current_row]; - - // Clear data in matrix row - current_matrix[current_row] = 0; - - // Select row and wait for row selecton to stabilize - select_row(current_row); - wait_us(30); - - // For each col... - for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) { - - // Select the col pin to read (active low) - uint8_t pin_state = readPin(col_pins[col_index]); - - // Populate the matrix row with the state of the col pin - current_matrix[current_row] |= pin_state ? 0 : (MATRIX_ROW_SHIFTER << col_index); - } - - // Unselect row - unselect_row(current_row); - - return (last_row_value != current_matrix[current_row]); -} - #elif (DIODE_DIRECTION == ROW2COL) /* Cols 0 - 16 - * These columns use two 74HC138 3 to 8 bit demultiplexer. D6, D7 is the enable pin, must be set high (1) to use it. + * These columns use two 74HC138 3 to 8 bit demultiplexer. B0, F1 is the enable pin, must be set high (1) to use it. * - * col / pin: PA0 PA1 PA2 PD6 PD7 PC4 + * col / pin: PB5 PB7 PF0 PB0 PF1 PE6 * 0: 0 ── 0 ── 0 1 ── 0 0 * ──────────────────────────────────────────── * 1: 0 ── 0 ── 1 1 ── 0 0 @@ -153,103 +104,103 @@ static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) static void select_col(uint8_t col) { switch (col) { case 0: - writePinLow(A0); - writePinLow(A1); - writePinLow(A2); - writePinHigh(D6); + writePinLow(B5); + writePinLow(B7); + writePinLow(F0); + writePinHigh(B0); break; case 1: - writePinLow(A0); - writePinLow(A1); - writePinHigh(A2); - writePinHigh(D6); + writePinLow(B5); + writePinLow(B7); + writePinHigh(F0); + writePinHigh(B0); break; case 2: - writePinLow(A0); - writePinHigh(A1); - writePinLow(A2); - writePinHigh(D6); + writePinLow(B5); + writePinHigh(B7); + writePinLow(F0); + writePinHigh(B0); break; case 3: - writePinLow(A0); - writePinHigh(A1); - writePinHigh(A2); - writePinHigh(D6); + writePinLow(B5); + writePinHigh(B7); + writePinHigh(F0); + writePinHigh(B0); break; case 4: - writePinHigh(A0); - writePinLow(A1); - writePinLow(A2); - writePinHigh(D6); + writePinHigh(B5); + writePinLow(B7); + writePinLow(F0); + writePinHigh(B0); break; case 5: - writePinHigh(A0); - writePinLow(A1); - writePinHigh(A2); - writePinHigh(D6); + writePinHigh(B5); + writePinLow(B7); + writePinHigh(F0); + writePinHigh(B0); break; case 6: - writePinHigh(A0); - writePinHigh(A1); - writePinLow(A2); - writePinHigh(D6); + writePinHigh(B5); + writePinHigh(B7); + writePinLow(F0); + writePinHigh(B0); break; case 7: - writePinHigh(A0); - writePinHigh(A1); - writePinHigh(A2); - writePinHigh(D6); + writePinHigh(B5); + writePinHigh(B7); + writePinHigh(F0); + writePinHigh(B0); break; case 8: - writePinLow(A0); - writePinLow(A1); - writePinLow(A2); - writePinHigh(D7); + writePinLow(B5); + writePinLow(B7); + writePinLow(F0); + writePinHigh(F1); break; case 9: - writePinLow(A0); - writePinLow(A1); - writePinHigh(A2); - writePinHigh(D7); + writePinLow(B5); + writePinLow(B7); + writePinHigh(F0); + writePinHigh(F1); break; case 10: - writePinLow(A0); - writePinHigh(A1); - writePinLow(A2); - writePinHigh(D7); + writePinLow(B5); + writePinHigh(B7); + writePinLow(F0); + writePinHigh(F1); break; case 11: - writePinLow(A0); - writePinHigh(A1); - writePinHigh(A2); - writePinHigh(D7); + writePinLow(B5); + writePinHigh(B7); + writePinHigh(F0); + writePinHigh(F1); break; case 12: - writePinHigh(A0); - writePinLow(A1); - writePinLow(A2); - writePinHigh(D7); + writePinHigh(B5); + writePinLow(B7); + writePinLow(F0); + writePinHigh(F1); break; case 13: - writePinHigh(A0); - writePinLow(A1); - writePinHigh(A2); - writePinHigh(D7); + writePinHigh(B5); + writePinLow(B7); + writePinHigh(F0); + writePinHigh(F1); break; case 14: - writePinHigh(A0); - writePinHigh(A1); - writePinHigh(A2); - writePinHigh(D7); + writePinHigh(B5); + writePinHigh(B7); + writePinHigh(F0); + writePinHigh(F1); break; case 15: - writePinHigh(A0); - writePinHigh(A1); - writePinLow(A2); - writePinHigh(D7); + writePinHigh(B5); + writePinHigh(B7); + writePinLow(F0); + writePinHigh(F1); break; case 16: - writePinLow(C4); + writePinLow(E6); break; } } @@ -257,117 +208,117 @@ static void select_col(uint8_t col) { static void unselect_col(uint8_t col) { switch (col) { case 0: - writePinHigh(A0); - writePinHigh(A1); - writePinHigh(A2); - writePinLow(D6); + writePinHigh(B5); + writePinHigh(B7); + writePinHigh(F0); + writePinLow(B0); break; case 1: - writePinHigh(A0); - writePinHigh(A1); - writePinLow(A2); - writePinLow(D6); + writePinHigh(B5); + writePinHigh(B7); + writePinLow(F0); + writePinLow(B0); break; case 2: - writePinHigh(A0); - writePinLow(A1); - writePinHigh(A2); - writePinLow(D6); + writePinHigh(B5); + writePinLow(B7); + writePinHigh(F0); + writePinLow(B0); break; case 3: - writePinHigh(A0); - writePinLow(A1); - writePinLow(A2); - writePinLow(D6); + writePinHigh(B5); + writePinLow(B7); + writePinLow(F0); + writePinLow(B0); break; case 4: - writePinLow(A0); - writePinHigh(A1); - writePinHigh(A2); - writePinLow(D6); + writePinLow(B5); + writePinHigh(B7); + writePinHigh(F0); + writePinLow(B0); break; case 5: - writePinLow(A0); - writePinHigh(A1); - writePinLow(A2); - writePinLow(D6); + writePinLow(B5); + writePinHigh(B7); + writePinLow(F0); + writePinLow(B0); break; case 6: - writePinLow(A0); - writePinLow(A1); - writePinHigh(A2); - writePinLow(D6); + writePinLow(B5); + writePinLow(B7); + writePinHigh(F0); + writePinLow(B0); break; case 7: - writePinLow(A0); - writePinLow(A1); - writePinLow(A2); - writePinLow(D6); + writePinLow(B5); + writePinLow(B7); + writePinLow(F0); + writePinLow(B0); break; case 8: - writePinHigh(A0); - writePinHigh(A1); - writePinHigh(A2); - writePinLow(D7); + writePinHigh(B5); + writePinHigh(B7); + writePinHigh(F0); + writePinLow(F1); break; case 9: - writePinHigh(A0); - writePinHigh(A1); - writePinLow(A2); - writePinLow(D7); + writePinHigh(B5); + writePinHigh(B7); + writePinLow(F0); + writePinLow(F1); break; case 10: - writePinHigh(A0); - writePinLow(A1); - writePinHigh(A2); - writePinLow(D7); + writePinHigh(B5); + writePinLow(B7); + writePinHigh(F0); + writePinLow(F1); break; case 11: - writePinHigh(A0); - writePinLow(A1); - writePinLow(A2); - writePinLow(D7); + writePinHigh(B5); + writePinLow(B7); + writePinLow(F0); + writePinLow(F1); break; case 12: - writePinLow(A0); - writePinHigh(A1); - writePinHigh(A2); - writePinLow(D7); + writePinLow(B5); + writePinHigh(B7); + writePinHigh(F0); + writePinLow(F1); break; case 13: - writePinLow(A0); - writePinHigh(A1); - writePinLow(A2); - writePinLow(D7); + writePinLow(B5); + writePinHigh(B7); + writePinLow(F0); + writePinLow(F1); break; case 14: - writePinLow(A0); - writePinLow(A1); - writePinLow(A2); - writePinLow(D7); + writePinLow(B5); + writePinLow(B7); + writePinLow(F0); + writePinLow(F1); break; case 15: - writePinLow(A0); - writePinLow(A1); - writePinHigh(A2); - writePinLow(D7); + writePinLow(B5); + writePinLow(B7); + writePinHigh(F0); + writePinLow(F1); break; case 16: - writePinHigh(C4); + writePinHigh(E6); break; } } static void unselect_cols(void) { //Native - writePinHigh(C4); + writePinHigh(E6); //Demultiplexer - writePinLow(D6); - writePinLow(D7); - writePinHigh(A0); - writePinHigh(A1); - writePinHigh(A2); + writePinLow(B0); + writePinLow(F1); + writePinHigh(B5); + writePinHigh(B7); + writePinHigh(F0); } static void init_pins(void) { @@ -375,12 +326,12 @@ static void init_pins(void) { for (uint8_t x = 0; x < MATRIX_ROWS; x++) { setPinInputHigh(row_pins[x]); } - setPinOutput(A0); - setPinOutput(A1); - setPinOutput(A2); - setPinOutput(D6); - setPinOutput(D7); - setPinOutput(C4); + setPinOutput(B5); + setPinOutput(B7); + setPinOutput(F0); + setPinOutput(B0); + setPinOutput(F1); + setPinOutput(E6); } static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) { @@ -426,12 +377,7 @@ void matrix_init_custom(void) { bool matrix_scan_custom(matrix_row_t current_matrix[]) { bool changed = false; -#if defined(DIRECT_PINS) || (DIODE_DIRECTION == COL2ROW) - // Set row, read cols - for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) { - changed |= read_cols_on_row(current_matrix, current_row); - } -#elif (DIODE_DIRECTION == ROW2COL) +#if defined(DIRECT_PINS) || (DIODE_DIRECTION == ROW2COL) // Set col, read rows for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { changed |= read_rows_on_col(current_matrix, current_col); diff --git a/keyboards/mechlovin/infinity87/rev2/readme.md b/keyboards/mechlovin/infinity87/rev2/readme.md index 4c7ea29291..a5be85f0bb 100644 --- a/keyboards/mechlovin/infinity87/rev2/readme.md +++ b/keyboards/mechlovin/infinity87/rev2/readme.md @@ -2,8 +2,7 @@ ![infinity87](https://i.imgur.com/pgtvUTrl.png) -A replacement PCB for TKL keyboard. south-facing stabilisers, .STEP file in our github - +A PCB for TKL keyboards. * Keyboard Maintainer: [Team Mechlovin'](https://github.com/mechlovin) * Hardware Supported: Infinity87 rev.2, AVR. * Hardware Availability: [Mechlovin.studio](https://mechlovin.studio) @@ -20,4 +19,3 @@ See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_to **Reset Key:** To put the IF87_rev2 into bootloader, push reset swith on the bottom of the PCB. -IF87_rev2 used USBasploader from [Erovia tutorial](https://erovia.github.io/posts/thk/#bootloader), thank you [Erovia](https://github.com/Erovia). diff --git a/keyboards/mechlovin/infinity87/rev2/rev2.c b/keyboards/mechlovin/infinity87/rev2/rev2.c index dfaa27d036..ab9ecbf6fc 100644 --- a/keyboards/mechlovin/infinity87/rev2/rev2.c +++ b/keyboards/mechlovin/infinity87/rev2/rev2.c @@ -14,40 +14,4 @@ * along with this program. If not, see . */ -#include "rev2.h" - -void led_init_ports(void) { - setPinOutput(A5); - setPinOutput(A6); - setPinOutput(A7); - setPinOutput(C7); - setPinOutput(C6); - -} - -layer_state_t layer_state_set_kb(layer_state_t state) { - state = layer_state_set_user(state); - writePinHigh(C6); - writePinHigh(C7); - writePinHigh(A7); - writePinHigh(A6); - writePinHigh(A5); - switch (get_highest_layer(state)) { - case 0: - writePinLow(C6); - break; - case 1: - writePinLow(C7); - break; - case 2: - writePinLow(A7); - break; - case 3: - writePinLow(A6); - break; - case 4: - writePinLow(A5); - break; - } - return state; -} +#include "rev2.h" \ No newline at end of file diff --git a/keyboards/mechlovin/infinity87/rev2/rules.mk b/keyboards/mechlovin/infinity87/rev2/rules.mk index 3b15413362..f30ef9c493 100644 --- a/keyboards/mechlovin/infinity87/rev2/rules.mk +++ b/keyboards/mechlovin/infinity87/rev2/rules.mk @@ -1,19 +1,18 @@ # MCU name -MCU = atmega32a - -# Processor frequency -F_CPU = 16000000 +MCU = atmega32u4 # Bootloader selection -BOOTLOADER = usbasploader +BOOTLOADER = atmel-dfu + # Build Options # change yes to no to disable # CONSOLE_ENABLE = no COMMAND_ENABLE = no -NKRO_ENABLE = no +NKRO_ENABLE = yes BACKLIGHT_ENABLE = yes +RGBLIGHT_ENABLE = yes CUSTOM_MATRIX = lite SRC += matrix.c From 2ac2695cb5fac5402e9a9834c55dce9d34ed0da5 Mon Sep 17 00:00:00 2001 From: foxx1337 Date: Fri, 5 Nov 2021 03:36:27 +0100 Subject: [PATCH 427/595] [Keymap] foxx1337 for Massdrop CTRL with raw HID (#8692) * [Keymap] foxx1337's personal keymap * Add keymap based on ctrl default * Add 5 minute rgb matrix timeout * Add foxx1337 layout defaults * Add raw HID communication protocol * Add rgbmatrix to the raw HID protocol * Add readme * Modernize ctrl, shift, alt mods detection * Add GPL like copyright headers --- .../massdrop/ctrl/keymaps/foxx1337/README.md | 18 ++ .../massdrop/ctrl/keymaps/foxx1337/config.h | 100 +++++++ .../ctrl/keymaps/foxx1337/hid_protocol.c | 25 ++ .../ctrl/keymaps/foxx1337/hid_protocol.h | 80 ++++++ .../massdrop/ctrl/keymaps/foxx1337/keymap.c | 268 ++++++++++++++++++ .../ctrl/keymaps/foxx1337/rgb_matrix_user.inc | 44 +++ .../massdrop/ctrl/keymaps/foxx1337/rules.mk | 6 + 7 files changed, 541 insertions(+) create mode 100644 keyboards/massdrop/ctrl/keymaps/foxx1337/README.md create mode 100644 keyboards/massdrop/ctrl/keymaps/foxx1337/config.h create mode 100644 keyboards/massdrop/ctrl/keymaps/foxx1337/hid_protocol.c create mode 100644 keyboards/massdrop/ctrl/keymaps/foxx1337/hid_protocol.h create mode 100644 keyboards/massdrop/ctrl/keymaps/foxx1337/keymap.c create mode 100644 keyboards/massdrop/ctrl/keymaps/foxx1337/rgb_matrix_user.inc create mode 100644 keyboards/massdrop/ctrl/keymaps/foxx1337/rules.mk diff --git a/keyboards/massdrop/ctrl/keymaps/foxx1337/README.md b/keyboards/massdrop/ctrl/keymaps/foxx1337/README.md new file mode 100644 index 0000000000..4827d2bdbf --- /dev/null +++ b/keyboards/massdrop/ctrl/keymaps/foxx1337/README.md @@ -0,0 +1,18 @@ +# Massdrop CTRL default layout with raw HID protocol + +This represents my current layout, with filtered out effects, personal defaults, +added inactivity timeout (for rgbmatrix) and a HID protocol example. + +To test that this is working, there's a user application I'm using to help with +development on [my GitHub](https://github.com/foxx1337/rawhid_io). + +Currently all the HID operations defined in the protocol are callable from the +user application: + +- hello: gets the string "CTRLHID 1.0.0" +- lights: toggles the rgbmatrix on/off +- led n #RRGGBB: colors the specified led. Valid n from 0 to 117 (87-117 are on + the edge) +- leds start #RRGGBB #RRGGBB #RRGGBB ...: colors the range of leds from start +- mode n: switches to the specific rgbmatrix mode. Use the last one, 11, to test + the led operations listed above diff --git a/keyboards/massdrop/ctrl/keymaps/foxx1337/config.h b/keyboards/massdrop/ctrl/keymaps/foxx1337/config.h new file mode 100644 index 0000000000..160ddf6d18 --- /dev/null +++ b/keyboards/massdrop/ctrl/keymaps/foxx1337/config.h @@ -0,0 +1,100 @@ +/* + * Copyright 2021 foxx1337 at yahoo dot com + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#define FORCE_NKRO // NKRO by default requires to be turned on, this forces it on during keyboard startup regardless of EEPROM setting. NKRO can still be turned off but will be turned on again if the keyboard reboots. + +#define RGB_MATRIX_FRAMEBUFFER_EFFECTS +#define RGB_MATRIX_KEYPRESSES // reacts to keypresses + +#define RGB_MATRIX_FRAMEBUFFER_EFFECTS +#define RGB_MATRIX_KEYPRESSES // reacts to keypresses +// #define RGB_MATRIX_KEYRELEASES // reacts to keyreleases (instead of keypresses) +#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_REACTIVE // Sets the default mode, if none has been set +#define RGB_MATRIX_STARTUP_HUE 12 +#define RGB_MATRIX_STARTUP_SPD (UINT8_MAX / 2 + 32) +#define RGB_MATRIX_STARTUP_VAL 96 +// #define RGBLIGHT_HUE_STEP 12 // Units to step when in/decreasing hue +// #define RGBLIGHT_SAT_STEP 25 // Units to step when in/decreasing saturation +// #define RGBLIGHT_VAL_STEP 12 // Units to step when in/decreasing value (brightness) +// #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects +// #define RGB_DISABLE_WHEN_USB_SUSPENDED false // turn off effects when suspended +// #define RGB_MATRIX_LED_PROCESS_LIMIT (DRIVER_LED_TOTAL + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness) +// #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) +// #define RGBLIGHT_ANIMATIONS // Run RGB animations +// #define RGBLIGHT_ANIMATIONS // Enable all additional animation modes. +// #define RGBLIGHT_EFFECT_ALTERNATING // Enable alternating animation mode. +// #define RGBLIGHT_EFFECT_BREATHING // Enable breathing animation mode. +// #define RGBLIGHT_EFFECT_CHRISTMAS // Enable christmas animation mode. +// #define RGBLIGHT_EFFECT_KNIGHT // Enable knight animation mode. +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD // Enable rainbow mood animation mode. +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL // Enable rainbow swirl animation mode. +// #define RGBLIGHT_EFFECT_RGB_TEST // Enable RGB test animation mode. +// #define RGBLIGHT_EFFECT_SNAKE // Enable snake animation mode. +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT // Enable static gradient mode. + +// #define RGBLIGHT_EFFECT_BREATHE_CENTER // If defined, used to calculate the curve for the breathing animation. Valid values are 1.0 to 2.7 +// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // The maximum brightness for the breathing mode. Valid values are 1 to 255 +// #define RGBLIGHT_EFFECT_CHRISTMAS_INTERVAL 1000 // How long to wait between light changes for the "Christmas" animation, in milliseconds +// #define RGBLIGHT_EFFECT_CHRISTMAS_STEP 2 // The number of LEDs to group the red/green colors by for the "Christmas" animation +// #define RGBLIGHT_EFFECT_KNIGHT_LED_NUM RGBLED_NUM // The number of LEDs to have the "Knight" animation travel +// #define RGBLIGHT_EFFECT_KNIGHT_LENGTH 3 // The number of LEDs to light up for the "Knight" animation +// #define RGBLIGHT_EFFECT_KNIGHT_OFFSET 0 // The number of LEDs to start the "Knight" animation from the start of the strip by +// #define RGBLIGHT_RAINBOW_SWIRL_RANGE 255 // Range adjustment for the rainbow swirl effect to get different swirls +// #define RGBLIGHT_EFFECT_SNAKE_LENGTH 4 // The number of LEDs to light up for the "Snake" animation + +// This list in in the correct mode order. Next mode is the following line, previous mode is previous line. Loops around. +// #define DISABLE_RGB_MATRIX_SOLID_COLOR // Static single hue, no speed support +// #define DISABLE_RGB_MATRIX_ALPHAS_MODS // Static dual hue, speed is hue for secondary hue +#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN // Static gradient top to bottom, speed controls how much gradient changes +#define DISABLE_RGB_MATRIX_BREATHING // Single hue brightness cycling animation +#define DISABLE_RGB_MATRIX_BAND_SAT // Single hue band fading saturation scrolling left to right +#define DISABLE_RGB_MATRIX_BAND_VAL // Single hue band fading brightness scrolling left to right +#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT // Single hue 3 blade spinning pinwheel fades saturation +#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL // Single hue 3 blade spinning pinwheel fades brightness +#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT // Single hue spinning spiral fades saturation +#define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL // Single hue spinning spiral fades brightness +#define DISABLE_RGB_MATRIX_CYCLE_ALL // Full keyboard solid hue cycling through full gradient +#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT // Full gradient scrolling left to right +#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN // Full gradient scrolling top to bottom +#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN // Full gradient scrolling out to in +#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL // Full dual gradients scrolling out to in +#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON // Full gradent Chevron shapped scrolling left to right +#define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL // Full gradient spinning pinwheel around center of keyboard +#define DISABLE_RGB_MATRIX_CYCLE_SPIRAL // Full gradient spinning spiral around center of keyboard +#define DISABLE_RGB_MATRIX_DUAL_BEACON // Full gradient spinning around center of keyboard +#define DISABLE_RGB_MATRIX_RAINBOW_BEACON // Full tighter gradient spinning around center of keyboard +#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS // Full dual gradients spinning two halfs of keyboard +// #define DISABLE_RGB_MATRIX_RAINDROPS // Randomly changes a single key's hue +// #define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS // Randomly changes a single key's hue and saturation +// =================================================== Requires RGB_MATRIX_FRAMEBUFFER_EFFECTS ============================================================= +#define DISABLE_RGB_MATRIX_TYPING_HEATMAP // How hot is your WPM! +#define DISABLE_RGB_MATRIX_DIGITAL_RAIN // That famous computer simulation +// =================================================== RGB_MATRIX_KEYPRESSES OR RGB_MATRIX_KEYRELEASES ===================================================== +// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE // Static single hue, pulses keys hit to shifted hue then fades to current hue +//#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE // Pulses keys hit to hue & value then fades value out +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE // Hue & value pulse near a single key hit then fades value out +//#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE // Hue & value pulse near multiple key hits then fades value out +//#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS // Hue & value pulse the same column and row of a single key hit then fades value out +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS // Hue & value pulse the same column and row of multiple key hits then fades value out +//#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS // Hue & value pulse away on the same column and row of a single key hit then fades value out +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS // Hue & value pulse away on the same column and row of multiple key hits then fades value out +#define DISABLE_RGB_MATRIX_SPLASH // Full gradient & value pulse away from a single key hit then fades value out +#define DISABLE_RGB_MATRIX_MULTISPLASH // Full gradient & value pulse away from multiple key hits then fades value out +#define DISABLE_RGB_MATRIX_SOLID_SPLASH // Hue & value pulse away from a single key hit then fades value out +#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH // Hue & value pulse away from multiple key hits then fades value out diff --git a/keyboards/massdrop/ctrl/keymaps/foxx1337/hid_protocol.c b/keyboards/massdrop/ctrl/keymaps/foxx1337/hid_protocol.c new file mode 100644 index 0000000000..fd7dd6b692 --- /dev/null +++ b/keyboards/massdrop/ctrl/keymaps/foxx1337/hid_protocol.c @@ -0,0 +1,25 @@ +/* + * Copyright 2021 foxx1337 at yahoo dot com + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H +#include "hid_protocol.h" + +uint8_t raw_hid_buffer[RAW_EPSIZE]; + +void raw_hid_perform_send(void) { + raw_hid_send(raw_hid_buffer, RAW_EPSIZE); +} diff --git a/keyboards/massdrop/ctrl/keymaps/foxx1337/hid_protocol.h b/keyboards/massdrop/ctrl/keymaps/foxx1337/hid_protocol.h new file mode 100644 index 0000000000..ff214aaad6 --- /dev/null +++ b/keyboards/massdrop/ctrl/keymaps/foxx1337/hid_protocol.h @@ -0,0 +1,80 @@ +/* + * Copyright 2021 foxx1337 at yahoo dot com + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include +#include + +#define CTRL_HID_GREETING_VERSION "CTRLHID 1.0.0" + +enum ctrl_hid_codes { + // Signals end of message. Not really that useful. + CTRL_HID_EOM = 0x00, + CTRL_HID_OK, + CTRL_HID_NOK, + + /** + * to hid: CTRL_HID_HELLO + * from hid: CTRL_HID_HELLO, "CTRLHID 1.0.0", CTRL_HID_EOM + **/ + CTRL_HID_HELLO, + + /** + * to hid: CTRL_HID_LIGHTS_TOGGLE + * from hid: CTRL_HID_LIGHTS_TOGGLE, CTRL_HID_OK, is_led_timeout, CTRL_HID_EOM + * + * Toggles all the leds on the keyboard. is_led_timeout will be 1 if the new + * state is off, 0 if leds are on. + **/ + CTRL_HID_LIGHTS_TOGGLE, + + /** + * to hid: CTRL_HID_LED, led_id, r, g, b + * from hid: CTRL_HID_LED, CTRL_HID_OK, CTRL_HID_EOM + * on error: CTRL_HID_LED, CTRL_HID_NOK, num_leds, CTRL_HID_EOM + * + * Sets the specific led to r, g, b. It's only visible when the hid_effect mode is active. + **/ + CTRL_HID_LED, + + /** + * to hid: CTRL_HID_LEDS, start, count, r0, g0, b0, ..., r[count-1], g[count-1], b[count-1] + * from hid: CTRL_HID_LEDS, CTRL_HID_OK, affected_leds, CTRL_HID_EOM + * + * Sets affected_leds leds following start to the corresponding r, g, b value. + * It's only visible when the hid_effect mode is active. + **/ + CTRL_HID_LEDS, + + /** + * to hid: CTRL_HID_RGBMATRIX_MODE, mode + * from hid: CTRL_HID_RGBMATRIX_MODE, CTRL_HID_OK, CTRL_HID_EOM + * on error: CTRL_HID_RGBMATRIX_MODE, CTRL_HID_NOK, mode_max, CTRL_HID_EOM + * + * Changes light mode. mode_max is hid_effect for CTRL_HID_LED and CTRL_HID_LEDS. + */ + CTRL_HID_RGBMATRIX_MODE +}; + +extern uint8_t raw_hid_buffer[RAW_EPSIZE]; + +// Defined in rgb_matrix_user.inc +// It's 119 for Massdrop CTRL, 0 - 118. +extern RGB rgb_matrix_led_state[DRIVER_LED_TOTAL]; + +void raw_hid_perform_send(void); diff --git a/keyboards/massdrop/ctrl/keymaps/foxx1337/keymap.c b/keyboards/massdrop/ctrl/keymaps/foxx1337/keymap.c new file mode 100644 index 0000000000..299251e456 --- /dev/null +++ b/keyboards/massdrop/ctrl/keymaps/foxx1337/keymap.c @@ -0,0 +1,268 @@ +/* + * Copyright 2021 foxx1337 at yahoo dot com + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H +#include "hid_protocol.h" + +enum ctrl_keycodes { + U_T_AUTO = SAFE_RANGE, //USB Extra Port Toggle Auto Detect / Always Active + U_T_AGCR, //USB Toggle Automatic GCR control + DBG_TOG, //DEBUG Toggle On / Off + DBG_MTRX, //DEBUG Toggle Matrix Prints + DBG_KBD, //DEBUG Toggle Keyboard Prints + DBG_MOU, //DEBUG Toggle Mouse Prints + MD_BOOT, //Restart into bootloader after hold timeout +}; + +#define TIMEOUT_ACTIVITY 300000 // 300 seconds before lights go off + +uint32_t time_last_activity; +bool is_led_timeout; +led_flags_t led_state; + +keymap_config_t keymap_config; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \ + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \ + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT \ + ), + [1] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MPLY, KC_MSTP, KC_VOLU, \ + _______, RGB_SPD, RGB_VAI, RGB_SPI, RGB_HUI, RGB_SAI, _______, U_T_AUTO,U_T_AGCR,_______, _______, _______, _______, _______, KC_MPRV, KC_MNXT, KC_VOLD, \ + _______, RGB_RMOD,RGB_VAD, RGB_MOD, RGB_HUD, RGB_SAD, _______, _______, _______, _______, _______, _______, _______, \ + _______, RGB_TOG, _______, _______, _______, MD_BOOT, NK_TOGG, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + ), + /* + [X] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, NK_TOGG, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ + ), + */ +}; + +void change_led_state(bool is_off) { + is_led_timeout = is_off; + + if (is_led_timeout) { + led_state = rgb_matrix_get_flags(); + if (led_state != LED_FLAG_NONE) { + rgb_matrix_set_flags(LED_FLAG_NONE); + rgb_matrix_disable_noeeprom(); + } + } else { + if (led_state != LED_FLAG_NONE) { + rgb_matrix_set_flags(led_state); + rgb_matrix_enable_noeeprom(); + } + } +} + +// Runs just one time when the keyboard initializes. +void matrix_init_user(void) { + time_last_activity = timer_read32(); +}; + +// Runs constantly in the background, in a loop. +void matrix_scan_user(void) { + if (!is_led_timeout && timer_elapsed32(time_last_activity) > TIMEOUT_ACTIVITY) { + change_led_state(true); + } +}; + +#define MODS_SHIFT (get_mods() & MOD_MASK_SHIFT) +#define MODS_CTRL (get_mods() & MOD_MASK_CTRL) +#define MODS_ALT (get_mods() & MOD_MASK_ALT) + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + static uint32_t key_timer; + + time_last_activity = timer_read32(); + if (is_led_timeout) { + change_led_state(false); + } + + switch (keycode) { + case U_T_AUTO: + if (record->event.pressed && MODS_SHIFT && MODS_CTRL) { + TOGGLE_FLAG_AND_PRINT(usb_extra_manual, "USB extra port manual mode"); + } + return false; + case U_T_AGCR: + if (record->event.pressed && MODS_SHIFT && MODS_CTRL) { + TOGGLE_FLAG_AND_PRINT(usb_gcr_auto, "USB GCR auto mode"); + } + return false; + case DBG_TOG: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_enable, "Debug mode"); + } + return false; + case DBG_MTRX: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_matrix, "Debug matrix"); + } + return false; + case DBG_KBD: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_keyboard, "Debug keyboard"); + } + return false; + case DBG_MOU: + if (record->event.pressed) { + TOGGLE_FLAG_AND_PRINT(debug_mouse, "Debug mouse"); + } + return false; + case MD_BOOT: + if (record->event.pressed) { + key_timer = timer_read32(); + } else { + if (timer_elapsed32(key_timer) >= 500) { + reset_keyboard(); + } + } + return false; + case RGB_TOG: + if (record->event.pressed) { + switch (rgb_matrix_get_flags()) { + case LED_FLAG_ALL: { + rgb_matrix_set_flags(LED_FLAG_KEYLIGHT | LED_FLAG_MODIFIER); + rgb_matrix_set_color_all(0, 0, 0); + } + break; + case LED_FLAG_KEYLIGHT | LED_FLAG_MODIFIER: { + rgb_matrix_set_flags(LED_FLAG_UNDERGLOW); + rgb_matrix_set_color_all(0, 0, 0); + } + break; + case LED_FLAG_UNDERGLOW: { + rgb_matrix_set_flags(LED_FLAG_NONE); + rgb_matrix_disable_noeeprom(); + } + break; + default: { + rgb_matrix_set_flags(LED_FLAG_ALL); + rgb_matrix_enable_noeeprom(); + } + break; + } + } + return false; + default: + return true; //Process all other keycodes normally + } +} + +void raw_hid_say_hello(void) { + const char *ctrl = CTRL_HID_GREETING_VERSION; + uint8_t i = 0; + while (ctrl[i] != 0 && i + 2 < RAW_EPSIZE) { + raw_hid_buffer[1 + i] = ctrl[i]; + i++; + } + raw_hid_buffer[i] = CTRL_HID_EOM; +} + +void raw_hid_lights_toggle(void) { + change_led_state(!is_led_timeout); + + raw_hid_buffer[1] = CTRL_HID_OK; + raw_hid_buffer[2] = (uint8_t) is_led_timeout; + raw_hid_buffer[3] = CTRL_HID_EOM; +} + +void raw_hid_led(uint8_t *data) { + //rgb_matrix_set_color(data[1], data[2], data[3], data[4]); + const uint8_t led = data[1]; + + if (led >= DRIVER_LED_TOTAL) { + raw_hid_buffer[1] = CTRL_HID_NOK; + raw_hid_buffer[2] = DRIVER_LED_TOTAL; + raw_hid_buffer[3] = CTRL_HID_EOM; + return; + } + + rgb_matrix_led_state[led].r = data[2]; + rgb_matrix_led_state[led].g = data[3]; + rgb_matrix_led_state[led].b = data[4]; + + raw_hid_buffer[1] = CTRL_HID_OK; + raw_hid_buffer[2] = CTRL_HID_EOM; +} + +void raw_hid_leds(uint8_t *data) { + const uint8_t first_led = data[1]; + const uint8_t number_leds = data[2]; + + uint8_t i = 0; + while (i < number_leds && first_led + i < DRIVER_LED_TOTAL && i * 3 + 5 < RAW_EPSIZE) { + rgb_matrix_led_state[first_led + i].r = data[3 + i * 3 + 0]; + rgb_matrix_led_state[first_led + i].g = data[3 + i * 3 + 1]; + rgb_matrix_led_state[first_led + i].b = data[3 + i * 3 + 2]; + i++; + } + + raw_hid_buffer[1] = CTRL_HID_OK; + raw_hid_buffer[2] = i; + raw_hid_buffer[3] = CTRL_HID_EOM; +} + +void raw_hid_rgbmatrix_mode(uint8_t *data) { + const uint8_t mode = data[1]; + if (mode >= RGB_MATRIX_EFFECT_MAX) { + raw_hid_buffer[1] = CTRL_HID_NOK; + raw_hid_buffer[2] = RGB_MATRIX_EFFECT_MAX - 1; + raw_hid_buffer[3] = CTRL_HID_EOM; + return; + } + rgb_matrix_mode_noeeprom(mode); + + raw_hid_buffer[1] = CTRL_HID_OK; + raw_hid_buffer[2] = CTRL_HID_EOM; +} + +void raw_hid_receive(uint8_t *data, uint8_t length) { + switch (*data) { + case CTRL_HID_HELLO: + raw_hid_say_hello(); + break; + case CTRL_HID_LIGHTS_TOGGLE: + raw_hid_lights_toggle(); + break; + case CTRL_HID_LED: + raw_hid_led(data); + break; + case CTRL_HID_LEDS: + raw_hid_leds(data); + break; + case CTRL_HID_RGBMATRIX_MODE: + raw_hid_rgbmatrix_mode(data); + break; + } + + raw_hid_perform_send(); +} diff --git a/keyboards/massdrop/ctrl/keymaps/foxx1337/rgb_matrix_user.inc b/keyboards/massdrop/ctrl/keymaps/foxx1337/rgb_matrix_user.inc new file mode 100644 index 0000000000..cca598e3b2 --- /dev/null +++ b/keyboards/massdrop/ctrl/keymaps/foxx1337/rgb_matrix_user.inc @@ -0,0 +1,44 @@ +/* + * Copyright 2021 foxx1337 at yahoo dot com + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +// !!! DO NOT ADD #pragma once !!! // + +// Step 1. +// Declare custom effects using the RGB_MATRIX_EFFECT macro +// (note the lack of semicolon after the macro!) +RGB_MATRIX_EFFECT(hid_effect) + +// Step 2. +// Define effects inside the `RGB_MATRIX_CUSTOM_EFFECT_IMPLS` ifdef block +#ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS + +RGB rgb_matrix_led_state[DRIVER_LED_TOTAL]; + +// e.g: A simple effect, self-contained within a single method +static bool hid_effect(effect_params_t* params) { + RGB_MATRIX_USE_LIMITS(led_min, led_max); + + for (uint8_t i = led_min; i < led_max; i++) { + rgb_matrix_set_color(i, + rgb_matrix_led_state[i].r, + rgb_matrix_led_state[i].g, + rgb_matrix_led_state[i].b); + } + return led_max < DRIVER_LED_TOTAL; +} + +#endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS diff --git a/keyboards/massdrop/ctrl/keymaps/foxx1337/rules.mk b/keyboards/massdrop/ctrl/keymaps/foxx1337/rules.mk new file mode 100644 index 0000000000..ba6cb8f4b5 --- /dev/null +++ b/keyboards/massdrop/ctrl/keymaps/foxx1337/rules.mk @@ -0,0 +1,6 @@ +# Build Options +CONSOLE_ENABLE = no # Console for debug +RAW_ENABLE = yes # Raw device +RGB_MATRIX_CUSTOM_USER = yes # Custom rgb matrix effect + +SRC += hid_protocol.c From 3f62b46939dbd2dd04d5d8c7b7ad53323f832332 Mon Sep 17 00:00:00 2001 From: yulei Date: Fri, 5 Nov 2021 10:54:40 +0800 Subject: [PATCH 428/595] add matrix abelx keyboard (#10968) * add matrix abelx keyboard * Update keyboards/matrix/abelx/abelx.c Co-authored-by: Drashna Jaelre * fixed rgb led pin issue * Apply suggestions from code review Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/matrix/abelx/aw9523b.h Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/matrix/abelx/aw9523b.c Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/matrix/abelx/abelx.h Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/matrix/abelx/abelx.c Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> * fixed board name * Apply suggestions from code review Co-authored-by: Nick Brassel * move led update from scan_kb to hoursekeeping_kb * move led update from scan_kb to housekeeping_kb Co-authored-by: Drashna Jaelre Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> Co-authored-by: Nick Brassel --- keyboards/matrix/abelx/abelx.c | 99 ++ keyboards/matrix/abelx/abelx.h | 61 + keyboards/matrix/abelx/aw9523b.c | 100 ++ keyboards/matrix/abelx/aw9523b.h | 62 + .../matrix/abelx/boards/abelx_bd/board.c | 268 ++++ .../matrix/abelx/boards/abelx_bd/board.h | 1299 +++++++++++++++++ .../matrix/abelx/boards/abelx_bd/board.mk | 9 + keyboards/matrix/abelx/bootloader_defs.h | 7 + keyboards/matrix/abelx/chconf.h | 714 +++++++++ keyboards/matrix/abelx/config.h | 108 ++ keyboards/matrix/abelx/halconf.h | 525 +++++++ keyboards/matrix/abelx/info.json | 15 + .../matrix/abelx/keymaps/default/keymap.c | 41 + keyboards/matrix/abelx/keymaps/iso/keymap.c | 39 + keyboards/matrix/abelx/ld/abelx_boot.ld | 85 ++ keyboards/matrix/abelx/matrix.c | 108 ++ keyboards/matrix/abelx/mcuconf.h | 253 ++++ keyboards/matrix/abelx/readme.md | 11 + keyboards/matrix/abelx/rules.mk | 57 + keyboards/matrix/abelx/tca6424.c | 117 ++ keyboards/matrix/abelx/tca6424.h | 42 + 21 files changed, 4020 insertions(+) create mode 100644 keyboards/matrix/abelx/abelx.c create mode 100644 keyboards/matrix/abelx/abelx.h create mode 100644 keyboards/matrix/abelx/aw9523b.c create mode 100644 keyboards/matrix/abelx/aw9523b.h create mode 100644 keyboards/matrix/abelx/boards/abelx_bd/board.c create mode 100644 keyboards/matrix/abelx/boards/abelx_bd/board.h create mode 100644 keyboards/matrix/abelx/boards/abelx_bd/board.mk create mode 100644 keyboards/matrix/abelx/bootloader_defs.h create mode 100644 keyboards/matrix/abelx/chconf.h create mode 100644 keyboards/matrix/abelx/config.h create mode 100644 keyboards/matrix/abelx/halconf.h create mode 100644 keyboards/matrix/abelx/info.json create mode 100644 keyboards/matrix/abelx/keymaps/default/keymap.c create mode 100644 keyboards/matrix/abelx/keymaps/iso/keymap.c create mode 100644 keyboards/matrix/abelx/ld/abelx_boot.ld create mode 100644 keyboards/matrix/abelx/matrix.c create mode 100644 keyboards/matrix/abelx/mcuconf.h create mode 100644 keyboards/matrix/abelx/readme.md create mode 100644 keyboards/matrix/abelx/rules.mk create mode 100644 keyboards/matrix/abelx/tca6424.c create mode 100644 keyboards/matrix/abelx/tca6424.h diff --git a/keyboards/matrix/abelx/abelx.c b/keyboards/matrix/abelx/abelx.c new file mode 100644 index 0000000000..77e749ee40 --- /dev/null +++ b/keyboards/matrix/abelx/abelx.c @@ -0,0 +1,99 @@ +/** + * abelx.c + * + * Copyright 2020 astro + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "abelx.h" +#include "tca6424.h" +#include "aw9523b.h" + +void set_pin(uint16_t pin) +{ + uint8_t data = tca6424_read_port(GET_PORT(pin)); + data |= ( 1 << GET_PIN(pin)); + tca6424_write_port(GET_PORT(pin), data); +} + +void clear_pin(uint16_t pin) +{ + uint8_t data = tca6424_read_port(GET_PORT(pin)); + data &= ~( 1 << GET_PIN(pin)); + tca6424_write_port(GET_PORT(pin), data); +} + +uint8_t read_pin(uint16_t pin) +{ + uint8_t data = tca6424_read_port(GET_PORT(pin)); + return (data & (1<BKP0R)) = REBOOT_MAGIC; +} diff --git a/keyboards/matrix/abelx/abelx.h b/keyboards/matrix/abelx/abelx.h new file mode 100644 index 0000000000..b5a1cc7aa7 --- /dev/null +++ b/keyboards/matrix/abelx/abelx.h @@ -0,0 +1,61 @@ +/** + * abelx.h + * + * Copyright 2020 astro + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + + +#define LAYOUT_tkl_iso( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, \ + \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K214, K215, K216, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, \ + K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, \ + K500, K501, K502, K506, K509, K510, K511, K512, K513, K514, K515\ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015}, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115}, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, KC_NO, K214, K116}, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K215, K216}, \ + { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, KC_NO, K413,KC_NO}, \ + { K500, K501, K502, KC_NO, KC_NO, KC_NO, K506, K509, K510, K511, K512, K513, K514, KC_NO, K515,KC_NO}, \ +} + +#define LAYOUT_tkl_ansi( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, \ + \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, \ + K400, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, \ + K500, K501, K502, K506, K509, K510, K511, K512, K513, K514, K515\ +) { \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015}, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115}, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K116}, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, K215, K216}, \ + { K400, KC_NO, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, KC_NO, K413,KC_NO}, \ + { K500, K501, K502, KC_NO, KC_NO, KC_NO, K506, K509, K510, K511, K512, K513, K514, KC_NO, K515,KC_NO}, \ +} + +void set_pin(uint16_t pin); +void clear_pin(uint16_t pin); +uint8_t read_pin(uint16_t pin); diff --git a/keyboards/matrix/abelx/aw9523b.c b/keyboards/matrix/abelx/aw9523b.c new file mode 100644 index 0000000000..8c6e8eaccf --- /dev/null +++ b/keyboards/matrix/abelx/aw9523b.c @@ -0,0 +1,100 @@ +/** + * @file aw9523b.c + * @brief driver implementation of aw9523b + * + * Copyright 2020 astro + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include "aw9523b.h" +#include "wait.h" +#include "i2c_master.h" + +#define AW9523B_P0_INPUT 0x00 +#define AW9523B_P1_INPUT 0x01 +#define AW9523B_P0_OUTPUT 0x02 +#define AW9523B_P1_OUTPUT 0x03 +#define AW9523B_P0_CONF 0x04 +#define AW9523B_P1_CONF 0x05 +#define AW9523B_P0_INT 0x06 +#define AW9523B_P1_INT 0x07 + +#define AW9523B_ID 0x10 +#define AW9523B_CTL 0x11 +#define AW9523B_P0_LED 0x12 +#define AW9523B_P1_LED 0x13 + + +#define AW9523B_RESET 0x7F + +#define TIMEOUT 100 + +#define PWM2BUF(x) ((x) - AW9523B_PWM_BASE) +static uint8_t aw9523b_pwm_buf[AW9523B_PWM_SIZE]; +static bool aw9523b_pwm_dirty = false; + +void aw9523b_init(uint8_t addr) +{ + i2c_init(); + // reset chip + uint8_t data = 0; + i2c_writeReg(addr, AW9523B_RESET, &data, 1, TIMEOUT); + wait_ms(1); + // set max led current + data = 0x03; // 37mA/4 + i2c_writeReg(addr, AW9523B_CTL, &data, 1, TIMEOUT); + // set port to led mode + data = 0; + i2c_writeReg(addr, AW9523B_P0_LED, &data, 1, TIMEOUT); + i2c_writeReg(addr, AW9523B_P1_LED, &data, 1, TIMEOUT); + // clear pwm buff + for (uint8_t i = 0; i < 16; i++) { + aw9523b_pwm_buf[i] = 0; + } + aw9523b_pwm_dirty = false; +} + +void aw9523b_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) +{ + if (index >= AW9523B_RGB_NUM) return; + + aw9523b_led led = g_aw9523b_leds[index]; + aw9523b_pwm_buf[PWM2BUF(led.r)] = red; + aw9523b_pwm_buf[PWM2BUF(led.g)] = green; + aw9523b_pwm_buf[PWM2BUF(led.b)] = blue; + aw9523b_pwm_dirty = true; +} + +void aw9523b_set_color_all(uint8_t red, uint8_t green, uint8_t blue) +{ + for (uint8_t i = 0; i < AW9523B_RGB_NUM; i++) { + aw9523b_set_color(i, red, green, blue); + } + aw9523b_pwm_dirty = true; +} + +void aw9523b_update_pwm_buffers(uint8_t addr) +{ + if (aw9523b_pwm_dirty) { + for (uint8_t i = 0; i < AW9523B_RGB_NUM; i++){ + aw9523b_led led = g_aw9523b_leds[i]; + i2c_writeReg(addr, led.r, &aw9523b_pwm_buf[PWM2BUF(led.r)], 1, TIMEOUT); + i2c_writeReg(addr, led.g, &aw9523b_pwm_buf[PWM2BUF(led.g)], 1, TIMEOUT); + i2c_writeReg(addr, led.b, &aw9523b_pwm_buf[PWM2BUF(led.b)], 1, TIMEOUT); + } + aw9523b_pwm_dirty = false; + } +} diff --git a/keyboards/matrix/abelx/aw9523b.h b/keyboards/matrix/abelx/aw9523b.h new file mode 100644 index 0000000000..daee0c8558 --- /dev/null +++ b/keyboards/matrix/abelx/aw9523b.h @@ -0,0 +1,62 @@ +/** + * @file aw9523b.h + * @brief driver for aw9523b + * + * Copyright 2020 astro + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include + +#ifndef AW9523B_ADDR + #define AW9523B_ADDR 0xB6 +#endif + +#define AW9523B_PWM_BASE 0x20 + +#define AW9523B_P10_PWM 0x20 +#define AW9523B_P11_PWM 0x21 +#define AW9523B_P12_PWM 0x22 +#define AW9523B_P13_PWM 0x23 +#define AW9523B_P00_PWM 0x24 +#define AW9523B_P01_PWM 0x25 +#define AW9523B_P02_PWM 0x26 +#define AW9523B_P03_PWM 0x27 +#define AW9523B_P04_PWM 0x28 +#define AW9523B_P05_PWM 0x29 +#define AW9523B_P06_PWM 0x2A +#define AW9523B_P07_PWM 0x2B +#define AW9523B_P14_PWM 0x2C +#define AW9523B_P15_PWM 0x2D +#define AW9523B_P16_PWM 0x2E +#define AW9523B_P17_PWM 0x2F + +#define AW9523B_PWM_SIZE 16 + +typedef struct { + uint8_t r; + uint8_t g; + uint8_t b; +} aw9523b_led; + +extern const aw9523b_led g_aw9523b_leds[AW9523B_RGB_NUM]; + +void aw9523b_init(uint8_t addr); + +void aw9523b_set_color(int index, uint8_t red, uint8_t green, uint8_t blue); +void aw9523b_set_color_all(uint8_t red, uint8_t green, uint8_t blue); +void aw9523b_update_pwm_buffers(uint8_t addr); diff --git a/keyboards/matrix/abelx/boards/abelx_bd/board.c b/keyboards/matrix/abelx/boards/abelx_bd/board.c new file mode 100644 index 0000000000..68cf23cddc --- /dev/null +++ b/keyboards/matrix/abelx/boards/abelx_bd/board.c @@ -0,0 +1,268 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * This file has been automatically generated using ChibiStudio board + * generator plugin. Do not edit manually. + */ + +#include "hal.h" +#include "stm32_gpio.h" + +/*===========================================================================*/ +/* Driver local definitions. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver exported variables. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver local variables and types. */ +/*===========================================================================*/ + +/** + * @brief Type of STM32 GPIO port setup. + */ +typedef struct { + uint32_t moder; + uint32_t otyper; + uint32_t ospeedr; + uint32_t pupdr; + uint32_t odr; + uint32_t afrl; + uint32_t afrh; +} gpio_setup_t; + +/** + * @brief Type of STM32 GPIO initialization data. + */ +typedef struct { +#if STM32_HAS_GPIOA || defined(__DOXYGEN__) + gpio_setup_t PAData; +#endif +#if STM32_HAS_GPIOB || defined(__DOXYGEN__) + gpio_setup_t PBData; +#endif +#if STM32_HAS_GPIOC || defined(__DOXYGEN__) + gpio_setup_t PCData; +#endif +#if STM32_HAS_GPIOD || defined(__DOXYGEN__) + gpio_setup_t PDData; +#endif +#if STM32_HAS_GPIOE || defined(__DOXYGEN__) + gpio_setup_t PEData; +#endif +#if STM32_HAS_GPIOF || defined(__DOXYGEN__) + gpio_setup_t PFData; +#endif +#if STM32_HAS_GPIOG || defined(__DOXYGEN__) + gpio_setup_t PGData; +#endif +#if STM32_HAS_GPIOH || defined(__DOXYGEN__) + gpio_setup_t PHData; +#endif +#if STM32_HAS_GPIOI || defined(__DOXYGEN__) + gpio_setup_t PIData; +#endif +#if STM32_HAS_GPIOJ || defined(__DOXYGEN__) + gpio_setup_t PJData; +#endif +#if STM32_HAS_GPIOK || defined(__DOXYGEN__) + gpio_setup_t PKData; +#endif +} gpio_config_t; + +/** + * @brief STM32 GPIO static initialization data. + */ +static const gpio_config_t gpio_default_config = { +#if STM32_HAS_GPIOA + {VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR, + VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH}, +#endif +#if STM32_HAS_GPIOB + {VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR, + VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH}, +#endif +#if STM32_HAS_GPIOC + {VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR, + VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH}, +#endif +#if STM32_HAS_GPIOD + {VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR, + VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH}, +#endif +#if STM32_HAS_GPIOE + {VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR, + VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH}, +#endif +#if STM32_HAS_GPIOF + {VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR, + VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH}, +#endif +#if STM32_HAS_GPIOG + {VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR, + VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH}, +#endif +#if STM32_HAS_GPIOH + {VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR, + VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH}, +#endif +#if STM32_HAS_GPIOI + {VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR, + VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH}, +#endif +#if STM32_HAS_GPIOJ + {VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR, + VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH}, +#endif +#if STM32_HAS_GPIOK + {VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR, + VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH} +#endif +}; + +/*===========================================================================*/ +/* Driver local functions. */ +/*===========================================================================*/ + +static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) { + + gpiop->OTYPER = config->otyper; + gpiop->OSPEEDR = config->ospeedr; + gpiop->PUPDR = config->pupdr; + gpiop->ODR = config->odr; + gpiop->AFRL = config->afrl; + gpiop->AFRH = config->afrh; + gpiop->MODER = config->moder; +} + +static void stm32_gpio_init(void) { + + /* Enabling GPIO-related clocks, the mask comes from the + registry header file.*/ + rccResetAHB1(STM32_GPIO_EN_MASK); + rccEnableAHB1(STM32_GPIO_EN_MASK, true); + + /* Initializing all the defined GPIO ports.*/ +#if STM32_HAS_GPIOA + gpio_init(GPIOA, &gpio_default_config.PAData); +#endif +#if STM32_HAS_GPIOB + gpio_init(GPIOB, &gpio_default_config.PBData); +#endif +#if STM32_HAS_GPIOC + gpio_init(GPIOC, &gpio_default_config.PCData); +#endif +#if STM32_HAS_GPIOD + gpio_init(GPIOD, &gpio_default_config.PDData); +#endif +#if STM32_HAS_GPIOE + gpio_init(GPIOE, &gpio_default_config.PEData); +#endif +#if STM32_HAS_GPIOF + gpio_init(GPIOF, &gpio_default_config.PFData); +#endif +#if STM32_HAS_GPIOG + gpio_init(GPIOG, &gpio_default_config.PGData); +#endif +#if STM32_HAS_GPIOH + gpio_init(GPIOH, &gpio_default_config.PHData); +#endif +#if STM32_HAS_GPIOI + gpio_init(GPIOI, &gpio_default_config.PIData); +#endif +#if STM32_HAS_GPIOJ + gpio_init(GPIOJ, &gpio_default_config.PJData); +#endif +#if STM32_HAS_GPIOK + gpio_init(GPIOK, &gpio_default_config.PKData); +#endif +} + +/*===========================================================================*/ +/* Driver interrupt handlers. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver exported functions. */ +/*===========================================================================*/ + +/** + * @brief Early initialization code. + * @details GPIO ports and system clocks are initialized before everything + * else. + */ +void __early_init(void) { + extern void enter_bootloader_mode_if_requested(void); + enter_bootloader_mode_if_requested(); + + stm32_gpio_init(); + stm32_clock_init(); +} + +#if HAL_USE_SDC || defined(__DOXYGEN__) +/** + * @brief SDC card detection. + */ +bool sdc_lld_is_card_inserted(SDCDriver *sdcp) { + + (void)sdcp; + /* TODO: Fill the implementation.*/ + return true; +} + +/** + * @brief SDC card write protection detection. + */ +bool sdc_lld_is_write_protected(SDCDriver *sdcp) { + + (void)sdcp; + /* TODO: Fill the implementation.*/ + return false; +} +#endif /* HAL_USE_SDC */ + +#if HAL_USE_MMC_SPI || defined(__DOXYGEN__) +/** + * @brief MMC_SPI card detection. + */ +bool mmc_lld_is_card_inserted(MMCDriver *mmcp) { + + (void)mmcp; + /* TODO: Fill the implementation.*/ + return true; +} + +/** + * @brief MMC_SPI card write protection detection. + */ +bool mmc_lld_is_write_protected(MMCDriver *mmcp) { + + (void)mmcp; + /* TODO: Fill the implementation.*/ + return false; +} +#endif + +/** + * @brief Board-specific initialization code. + * @todo Add your board-specific code, if any. + */ +void boardInit(void) { + +} diff --git a/keyboards/matrix/abelx/boards/abelx_bd/board.h b/keyboards/matrix/abelx/boards/abelx_bd/board.h new file mode 100644 index 0000000000..e57147fab8 --- /dev/null +++ b/keyboards/matrix/abelx/boards/abelx_bd/board.h @@ -0,0 +1,1299 @@ +/* + ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * This file has been automatically generated using ChibiStudio board + * generator plugin. Do not edit manually. + */ + +#ifndef BOARD_H +#define BOARD_H + +/* + * Board identifier. + */ +#define BOARD_MATRIX_ABELX +#define BOARD_NAME "Matrix ABELX keyboard" +#define BOARD_OTG_NOVBUSSENS + +/* + * Board oscillators-related settings. + * NOTE: LSE not fitted. + */ +#if !defined(STM32_LSECLK) +#define STM32_LSECLK 0U +#endif + +#if !defined(STM32_HSECLK) +#define STM32_HSECLK 8000000U +#endif + +//#define STM32_HSE_BYPASS + +/* + * Board voltages. + * Required for performance limits calculation. + */ +#define STM32_VDD 300U + +/* + * MCU type as defined in the ST header. + */ +#define STM32F411xE + +/* + * IO pins assignments. + */ +#define GPIOA_PIN0 0U +#define GPIOA_PIN1 1U +#define GPIOA_PIN2 2U +#define GPIOA_PIN3 3U +#define GPIOA_PIN4 4U +#define GPIOA_SCK 5U +#define GPIOA_MISO 6U +#define GPIOA_MOSI 7U +#define GPIOA_PIN8 8U +#define GPIOA_PIN9 9U +#define GPIOA_PIN10 10U +#define GPIOA_OTG_FS_DM 11U +#define GPIOA_OTG_FS_DP 12U +#define GPIOA_SWDIO 13U +#define GPIOA_SWCLK 14U +#define GPIOA_PIN15 15U + +#define GPIOB_PIN0 0U +#define GPIOB_PIN1 1U +#define GPIOB_PIN2 2U +#define GPIOB_SWO 3U +#define GPIOB_PIN4 4U +#define GPIOB_PIN5 5U +#define GPIOB_UART_TX 6U +#define GPIOB_UART_RX 7U +#define GPIOB_PIN8 8U +#define GPIOB_PIN9 9U +#define GPIOB_PIN10 10U +#define GPIOB_PIN11 11U +#define GPIOB_PIN12 12U +#define GPIOB_PIN13 13U +#define GPIOB_PIN14 14U +#define GPIOB_PIN15 15U + +#define GPIOC_PIN0 0U +#define GPIOC_PIN1 1U +#define GPIOC_PIN2 2U +#define GPIOC_PIN3 3U +#define GPIOC_PIN4 4U +#define GPIOC_PIN5 5U +#define GPIOC_PIN6 6U +#define GPIOC_PIN7 7U +#define GPIOC_PIN8 8U +#define GPIOC_PIN9 9U +#define GPIOC_PIN10 10U +#define GPIOC_PIN11 11U +#define GPIOC_PIN12 12U +#define GPIOC_PIN13 13U +#define GPIOC_PIN14 14U +#define GPIOC_PIN15 15U + +#define GPIOD_PIN0 0U +#define GPIOD_PIN1 1U +#define GPIOD_PIN2 2U +#define GPIOD_PIN3 3U +#define GPIOD_PIN4 4U +#define GPIOD_PIN5 5U +#define GPIOD_PIN6 6U +#define GPIOD_PIN7 7U +#define GPIOD_PIN8 8U +#define GPIOD_PIN9 9U +#define GPIOD_PIN10 10U +#define GPIOD_PIN11 11U +#define GPIOD_PIN12 12U +#define GPIOD_PIN13 13U +#define GPIOD_PIN14 14U +#define GPIOD_PIN15 15U + +#define GPIOE_PIN0 0U +#define GPIOE_PIN1 1U +#define GPIOE_PIN2 2U +#define GPIOE_PIN3 3U +#define GPIOE_PIN4 4U +#define GPIOE_PIN5 5U +#define GPIOE_PIN6 6U +#define GPIOE_PIN7 7U +#define GPIOE_PIN8 8U +#define GPIOE_PIN9 9U +#define GPIOE_PIN10 10U +#define GPIOE_PIN11 11U +#define GPIOE_PIN12 12U +#define GPIOE_PIN13 13U +#define GPIOE_PIN14 14U +#define GPIOE_PIN15 15U + +#define GPIOF_PIN0 0U +#define GPIOF_PIN1 1U +#define GPIOF_PIN2 2U +#define GPIOF_PIN3 3U +#define GPIOF_PIN4 4U +#define GPIOF_PIN5 5U +#define GPIOF_PIN6 6U +#define GPIOF_PIN7 7U +#define GPIOF_PIN8 8U +#define GPIOF_PIN9 9U +#define GPIOF_PIN10 10U +#define GPIOF_PIN11 11U +#define GPIOF_PIN12 12U +#define GPIOF_PIN13 13U +#define GPIOF_PIN14 14U +#define GPIOF_PIN15 15U + +#define GPIOG_PIN0 0U +#define GPIOG_PIN1 1U +#define GPIOG_PIN2 2U +#define GPIOG_PIN3 3U +#define GPIOG_PIN4 4U +#define GPIOG_PIN5 5U +#define GPIOG_PIN6 6U +#define GPIOG_PIN7 7U +#define GPIOG_PIN8 8U +#define GPIOG_PIN9 9U +#define GPIOG_PIN10 10U +#define GPIOG_PIN11 11U +#define GPIOG_PIN12 12U +#define GPIOG_PIN13 13U +#define GPIOG_PIN14 14U +#define GPIOG_PIN15 15U + +#define GPIOH_OSC_IN 0U +#define GPIOH_OSC_OUT 1U +#define GPIOH_PIN2 2U +#define GPIOH_PIN3 3U +#define GPIOH_PIN4 4U +#define GPIOH_PIN5 5U +#define GPIOH_PIN6 6U +#define GPIOH_PIN7 7U +#define GPIOH_PIN8 8U +#define GPIOH_PIN9 9U +#define GPIOH_PIN10 10U +#define GPIOH_PIN11 11U +#define GPIOH_PIN12 12U +#define GPIOH_PIN13 13U +#define GPIOH_PIN14 14U +#define GPIOH_PIN15 15U + +#define GPIOI_PIN0 0U +#define GPIOI_PIN1 1U +#define GPIOI_PIN2 2U +#define GPIOI_PIN3 3U +#define GPIOI_PIN4 4U +#define GPIOI_PIN5 5U +#define GPIOI_PIN6 6U +#define GPIOI_PIN7 7U +#define GPIOI_PIN8 8U +#define GPIOI_PIN9 9U +#define GPIOI_PIN10 10U +#define GPIOI_PIN11 11U +#define GPIOI_PIN12 12U +#define GPIOI_PIN13 13U +#define GPIOI_PIN14 14U +#define GPIOI_PIN15 15U + +/* + * I/O ports initial setup, this configuration is established soon after reset + * in the initialization code. + * Please refer to the STM32 Reference Manual for details. + */ +#define PIN_MODE_INPUT(n) (0U << ((n) * 2U)) +#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2U)) +#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2U)) +#define PIN_MODE_ANALOG(n) (3U << ((n) * 2U)) +#define PIN_ODR_LOW(n) (0U << (n)) +#define PIN_ODR_HIGH(n) (1U << (n)) +#define PIN_OTYPE_PUSHPULL(n) (0U << (n)) +#define PIN_OTYPE_OPENDRAIN(n) (1U << (n)) +#define PIN_OSPEED_VERYLOW(n) (0U << ((n) * 2U)) +#define PIN_OSPEED_LOW(n) (1U << ((n) * 2U)) +#define PIN_OSPEED_MEDIUM(n) (2U << ((n) * 2U)) +#define PIN_OSPEED_HIGH(n) (3U << ((n) * 2U)) +#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2U)) +#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2U)) +#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2U)) +#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U)) + +/* + * GPIOA setup: + * + * PA0 - (input pullup). + * PA1 - (input pullup). + * PA2 - (input pullup). + * PA3 - (input pullup). + * PA4 - (input pullup). + * PA5 - SPI SCK (alternate 5). + * PA6 - SPI MISO (alternate 5). + * PA7 - SPI MOSI (alternate 5). + * PA8 - (input pullup). + * PA9 - (input pullup). + * PA10 - (input pullup). + * PA11 - OTG_FS_DM (alternate 10). + * PA12 - OTG_FS_DP (alternate 10). + * PA13 - SWDIO (alternate 0). + * PA14 - SWCLK (alternate 0). + * PA15 - (input pullup). + */ +#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_PIN0) | \ + PIN_MODE_INPUT(GPIOA_PIN1) | \ + PIN_MODE_INPUT(GPIOA_PIN2) | \ + PIN_MODE_INPUT(GPIOA_PIN3) | \ + PIN_MODE_INPUT(GPIOA_PIN4) | \ + PIN_MODE_ALTERNATE(GPIOA_SCK) | \ + PIN_MODE_ALTERNATE(GPIOA_MISO) | \ + PIN_MODE_ALTERNATE(GPIOA_MOSI) | \ + PIN_MODE_INPUT(GPIOA_PIN8) | \ + PIN_MODE_INPUT(GPIOA_PIN9) | \ + PIN_MODE_INPUT(GPIOA_PIN10) | \ + PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DM) | \ + PIN_MODE_ALTERNATE(GPIOA_OTG_FS_DP) | \ + PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \ + PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \ + PIN_MODE_INPUT(GPIOA_PIN15)) +#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOA_SCK) | \ + PIN_OTYPE_PUSHPULL(GPIOA_MISO) | \ + PIN_OTYPE_PUSHPULL(GPIOA_MOSI) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOA_OTG_FS_DM) | \ + PIN_OTYPE_PUSHPULL(GPIOA_OTG_FS_DP) | \ + PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \ + PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \ + PIN_OTYPE_PUSHPULL(GPIOA_PIN15)) +#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_PIN0) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN1) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN2) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN3) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN4) | \ + PIN_OSPEED_HIGH(GPIOA_SCK) | \ + PIN_OSPEED_HIGH(GPIOA_MISO) | \ + PIN_OSPEED_HIGH(GPIOA_MOSI) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN8) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN9) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN10) | \ + PIN_OSPEED_HIGH(GPIOA_OTG_FS_DM) | \ + PIN_OSPEED_HIGH(GPIOA_OTG_FS_DP) | \ + PIN_OSPEED_HIGH(GPIOA_SWDIO) | \ + PIN_OSPEED_HIGH(GPIOA_SWCLK) | \ + PIN_OSPEED_VERYLOW(GPIOA_PIN15)) +#define VAL_GPIOA_PUPDR (PIN_PUPDR_PULLUP(GPIOA_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOA_SCK) | \ + PIN_PUPDR_PULLUP(GPIOA_MISO) | \ + PIN_PUPDR_PULLUP(GPIOA_MOSI) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN10) | \ + PIN_PUPDR_FLOATING(GPIOA_OTG_FS_DM) | \ + PIN_PUPDR_FLOATING(GPIOA_OTG_FS_DP) | \ + PIN_PUPDR_PULLUP(GPIOA_SWDIO) | \ + PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \ + PIN_PUPDR_PULLUP(GPIOA_PIN15)) +#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_PIN0) | \ + PIN_ODR_HIGH(GPIOA_PIN1) | \ + PIN_ODR_HIGH(GPIOA_PIN2) | \ + PIN_ODR_HIGH(GPIOA_PIN3) | \ + PIN_ODR_HIGH(GPIOA_PIN4) | \ + PIN_ODR_HIGH(GPIOA_SCK) | \ + PIN_ODR_HIGH(GPIOA_MISO) | \ + PIN_ODR_HIGH(GPIOA_MOSI) | \ + PIN_ODR_HIGH(GPIOA_PIN8) | \ + PIN_ODR_HIGH(GPIOA_PIN9) | \ + PIN_ODR_HIGH(GPIOA_PIN10) | \ + PIN_ODR_HIGH(GPIOA_OTG_FS_DM) | \ + PIN_ODR_HIGH(GPIOA_OTG_FS_DP) | \ + PIN_ODR_HIGH(GPIOA_SWDIO) | \ + PIN_ODR_HIGH(GPIOA_SWCLK) | \ + PIN_ODR_HIGH(GPIOA_PIN15)) +#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_PIN0, 0U) | \ + PIN_AFIO_AF(GPIOA_PIN1, 0U) | \ + PIN_AFIO_AF(GPIOA_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOA_PIN3, 0U) | \ + PIN_AFIO_AF(GPIOA_PIN4, 0U) | \ + PIN_AFIO_AF(GPIOA_SCK, 5U) | \ + PIN_AFIO_AF(GPIOA_MISO, 5U) | \ + PIN_AFIO_AF(GPIOA_MOSI, 5U)) +#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOA_PIN9, 0U) | \ + PIN_AFIO_AF(GPIOA_PIN10, 0U) | \ + PIN_AFIO_AF(GPIOA_OTG_FS_DM, 10U) | \ + PIN_AFIO_AF(GPIOA_OTG_FS_DP, 10U) | \ + PIN_AFIO_AF(GPIOA_SWDIO, 0U) | \ + PIN_AFIO_AF(GPIOA_SWCLK, 0U) | \ + PIN_AFIO_AF(GPIOA_PIN15, 0U)) + +/* + * GPIOB setup: + * + * PB0 - (input pullup). + * PB1 - (input pullup). + * PB2 - (input pullup). + * PB3 - SWO (alternate 0). + * PB4 - (input pullup). + * PB5 - (input pullup). + * PB6 - UART TX (alternate 7). + * PB7 - UART RX (alternate 7). + * PB8 - (input pullup). + * PB9 - (input pullup). + * PB10 - (input pullup). + * PB11 - (input pullup). + * PB12 - (input pullup). + * PB13 - (input pullup). + * PB14 - (input pullup). + * PB15 - (input pullup). + */ +#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \ + PIN_MODE_INPUT(GPIOB_PIN1) | \ + PIN_MODE_INPUT(GPIOB_PIN2) | \ + PIN_MODE_ALTERNATE(GPIOB_SWO) | \ + PIN_MODE_INPUT(GPIOB_PIN4) | \ + PIN_MODE_INPUT(GPIOB_PIN5) | \ + PIN_MODE_ALTERNATE(GPIOB_UART_TX) | \ + PIN_MODE_ALTERNATE(GPIOB_UART_RX) | \ + PIN_MODE_INPUT(GPIOB_PIN8) | \ + PIN_MODE_INPUT(GPIOB_PIN9) | \ + PIN_MODE_INPUT(GPIOB_PIN10) | \ + PIN_MODE_INPUT(GPIOB_PIN11) | \ + PIN_MODE_INPUT(GPIOB_PIN12) | \ + PIN_MODE_INPUT(GPIOB_PIN13) | \ + PIN_MODE_INPUT(GPIOB_PIN14) | \ + PIN_MODE_INPUT(GPIOB_PIN15)) +#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOB_SWO) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOB_UART_TX) | \ + PIN_OTYPE_PUSHPULL(GPIOB_UART_RX) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOB_PIN15)) +#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN1) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN2) | \ + PIN_OSPEED_HIGH(GPIOB_SWO) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN4) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN5) | \ + PIN_OSPEED_HIGH(GPIOB_UART_TX) | \ + PIN_OSPEED_HIGH(GPIOB_UART_RX) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN8) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN9) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN10) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN11) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN12) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN13) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN14) | \ + PIN_OSPEED_VERYLOW(GPIOB_PIN15)) +#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOB_SWO) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN5) | \ + PIN_PUPDR_FLOATING(GPIOB_UART_TX) | \ + PIN_PUPDR_FLOATING(GPIOB_UART_RX) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOB_PIN15)) +#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \ + PIN_ODR_HIGH(GPIOB_PIN1) | \ + PIN_ODR_HIGH(GPIOB_PIN2) | \ + PIN_ODR_HIGH(GPIOB_SWO) | \ + PIN_ODR_HIGH(GPIOB_PIN4) | \ + PIN_ODR_HIGH(GPIOB_PIN5) | \ + PIN_ODR_HIGH(GPIOB_UART_TX) | \ + PIN_ODR_HIGH(GPIOB_UART_RX) | \ + PIN_ODR_HIGH(GPIOB_PIN8) | \ + PIN_ODR_HIGH(GPIOB_PIN9) | \ + PIN_ODR_HIGH(GPIOB_PIN10) | \ + PIN_ODR_HIGH(GPIOB_PIN11) | \ + PIN_ODR_HIGH(GPIOB_PIN12) | \ + PIN_ODR_HIGH(GPIOB_PIN13) | \ + PIN_ODR_HIGH(GPIOB_PIN14) | \ + PIN_ODR_HIGH(GPIOB_PIN15)) +#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN1, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOB_SWO, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN4, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN5, 0U) | \ + PIN_AFIO_AF(GPIOB_UART_TX, 7U) | \ + PIN_AFIO_AF(GPIOB_UART_RX, 7U)) +#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN9, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN10, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN11, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN12, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN13, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN14, 0U) | \ + PIN_AFIO_AF(GPIOB_PIN15, 0U)) + +/* + * GPIOC setup: + * + * PC0 - (input pullup). + * PC1 - (input pullup). + * PC2 - (input pullup). + * PC3 - (input pullup). + * PC4 - (input pullup). + * PC5 - (input pullup). + * PC6 - (input pullup). + * PC7 - (input pullup). + * PC8 - (input pullup). + * PC9 - (input pullup). + * PC10 - (input pullup). + * PC11 - (input pullup). + * PC12 - (input pullup). + * PC13 - (input floating). + * PC14 - (input floating). + * PC15 - (input floating). + */ +#define VAL_GPIOC_MODER (PIN_MODE_INPUT(GPIOC_PIN0) | \ + PIN_MODE_INPUT(GPIOC_PIN1) | \ + PIN_MODE_INPUT(GPIOC_PIN2) | \ + PIN_MODE_INPUT(GPIOC_PIN3) | \ + PIN_MODE_INPUT(GPIOC_PIN4) | \ + PIN_MODE_INPUT(GPIOC_PIN5) | \ + PIN_MODE_INPUT(GPIOC_PIN6) | \ + PIN_MODE_INPUT(GPIOC_PIN7) | \ + PIN_MODE_INPUT(GPIOC_PIN8) | \ + PIN_MODE_INPUT(GPIOC_PIN9) | \ + PIN_MODE_INPUT(GPIOC_PIN10) | \ + PIN_MODE_INPUT(GPIOC_PIN11) | \ + PIN_MODE_INPUT(GPIOC_PIN12) | \ + PIN_MODE_INPUT(GPIOC_PIN13) | \ + PIN_MODE_INPUT(GPIOC_PIN14) | \ + PIN_MODE_INPUT(GPIOC_PIN15)) +#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOC_PIN15)) +#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOC_PIN0) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN1) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN2) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN3) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN4) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN5) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN6) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN7) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN8) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN9) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN10) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN11) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN12) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN13) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN14) | \ + PIN_OSPEED_VERYLOW(GPIOC_PIN15)) +#define VAL_GPIOC_PUPDR (PIN_PUPDR_PULLUP(GPIOC_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOC_PIN15)) +#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_PIN0) | \ + PIN_ODR_HIGH(GPIOC_PIN1) | \ + PIN_ODR_HIGH(GPIOC_PIN2) | \ + PIN_ODR_HIGH(GPIOC_PIN3) | \ + PIN_ODR_HIGH(GPIOC_PIN4) | \ + PIN_ODR_HIGH(GPIOC_PIN5) | \ + PIN_ODR_HIGH(GPIOC_PIN6) | \ + PIN_ODR_HIGH(GPIOC_PIN7) | \ + PIN_ODR_HIGH(GPIOC_PIN8) | \ + PIN_ODR_HIGH(GPIOC_PIN9) | \ + PIN_ODR_HIGH(GPIOC_PIN10) | \ + PIN_ODR_HIGH(GPIOC_PIN11) | \ + PIN_ODR_HIGH(GPIOC_PIN12) | \ + PIN_ODR_HIGH(GPIOC_PIN13) | \ + PIN_ODR_HIGH(GPIOC_PIN14) | \ + PIN_ODR_HIGH(GPIOC_PIN15)) +#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_PIN0, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN1, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN3, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN4, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN5, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN6, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN7, 0U)) +#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN9, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN10, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN11, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN12, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN13, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN14, 0U) | \ + PIN_AFIO_AF(GPIOC_PIN15, 0U)) + +/* + * GPIOD setup: + * + * PD0 - PIN0 (input pullup). + * PD1 - PIN1 (input pullup). + * PD2 - PIN2 (input pullup). + * PD3 - PIN3 (input pullup). + * PD4 - PIN4 (input pullup). + * PD5 - PIN5 (input pullup). + * PD6 - PIN6 (input pullup). + * PD7 - PIN7 (input pullup). + * PD8 - PIN8 (input pullup). + * PD9 - PIN9 (input pullup). + * PD10 - PIN10 (input pullup). + * PD11 - PIN11 (input pullup). + * PD12 - PIN12 (input pullup). + * PD13 - PIN13 (input pullup). + * PD14 - PIN14 (input pullup). + * PD15 - PIN15 (input pullup). + */ +#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \ + PIN_MODE_INPUT(GPIOD_PIN1) | \ + PIN_MODE_INPUT(GPIOD_PIN2) | \ + PIN_MODE_INPUT(GPIOD_PIN3) | \ + PIN_MODE_INPUT(GPIOD_PIN4) | \ + PIN_MODE_INPUT(GPIOD_PIN5) | \ + PIN_MODE_INPUT(GPIOD_PIN6) | \ + PIN_MODE_INPUT(GPIOD_PIN7) | \ + PIN_MODE_INPUT(GPIOD_PIN8) | \ + PIN_MODE_INPUT(GPIOD_PIN9) | \ + PIN_MODE_INPUT(GPIOD_PIN10) | \ + PIN_MODE_INPUT(GPIOD_PIN11) | \ + PIN_MODE_INPUT(GPIOD_PIN12) | \ + PIN_MODE_INPUT(GPIOD_PIN13) | \ + PIN_MODE_INPUT(GPIOD_PIN14) | \ + PIN_MODE_INPUT(GPIOD_PIN15)) +#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOD_PIN15)) +#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_HIGH(GPIOD_PIN0) | \ + PIN_OSPEED_HIGH(GPIOD_PIN1) | \ + PIN_OSPEED_HIGH(GPIOD_PIN2) | \ + PIN_OSPEED_HIGH(GPIOD_PIN3) | \ + PIN_OSPEED_HIGH(GPIOD_PIN4) | \ + PIN_OSPEED_HIGH(GPIOD_PIN5) | \ + PIN_OSPEED_HIGH(GPIOD_PIN6) | \ + PIN_OSPEED_HIGH(GPIOD_PIN7) | \ + PIN_OSPEED_HIGH(GPIOD_PIN8) | \ + PIN_OSPEED_HIGH(GPIOD_PIN9) | \ + PIN_OSPEED_HIGH(GPIOD_PIN10) | \ + PIN_OSPEED_HIGH(GPIOD_PIN11) | \ + PIN_OSPEED_HIGH(GPIOD_PIN12) | \ + PIN_OSPEED_HIGH(GPIOD_PIN13) | \ + PIN_OSPEED_HIGH(GPIOD_PIN14) | \ + PIN_OSPEED_HIGH(GPIOD_PIN15)) +#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOD_PIN15)) +#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \ + PIN_ODR_HIGH(GPIOD_PIN1) | \ + PIN_ODR_HIGH(GPIOD_PIN2) | \ + PIN_ODR_HIGH(GPIOD_PIN3) | \ + PIN_ODR_HIGH(GPIOD_PIN4) | \ + PIN_ODR_HIGH(GPIOD_PIN5) | \ + PIN_ODR_HIGH(GPIOD_PIN6) | \ + PIN_ODR_HIGH(GPIOD_PIN7) | \ + PIN_ODR_HIGH(GPIOD_PIN8) | \ + PIN_ODR_HIGH(GPIOD_PIN9) | \ + PIN_ODR_HIGH(GPIOD_PIN10) | \ + PIN_ODR_HIGH(GPIOD_PIN11) | \ + PIN_ODR_HIGH(GPIOD_PIN12) | \ + PIN_ODR_HIGH(GPIOD_PIN13) | \ + PIN_ODR_HIGH(GPIOD_PIN14) | \ + PIN_ODR_HIGH(GPIOD_PIN15)) +#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN1, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN3, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN4, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN5, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN6, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN7, 0U)) +#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN9, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN10, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN11, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN12, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN13, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN14, 0U) | \ + PIN_AFIO_AF(GPIOD_PIN15, 0U)) + +/* + * GPIOE setup: + * + * PE0 - PIN0 (input pullup). + * PE1 - PIN1 (input pullup). + * PE2 - PIN2 (input pullup). + * PE3 - PIN3 (input pullup). + * PE4 - PIN4 (input pullup). + * PE5 - PIN5 (input pullup). + * PE6 - PIN6 (input pullup). + * PE7 - PIN7 (input pullup). + * PE8 - PIN8 (input pullup). + * PE9 - PIN9 (input pullup). + * PE10 - PIN10 (input pullup). + * PE11 - PIN11 (input pullup). + * PE12 - PIN12 (input pullup). + * PE13 - PIN13 (input pullup). + * PE14 - PIN14 (input pullup). + * PE15 - PIN15 (input pullup). + */ +#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | \ + PIN_MODE_INPUT(GPIOE_PIN1) | \ + PIN_MODE_INPUT(GPIOE_PIN2) | \ + PIN_MODE_INPUT(GPIOE_PIN3) | \ + PIN_MODE_INPUT(GPIOE_PIN4) | \ + PIN_MODE_INPUT(GPIOE_PIN5) | \ + PIN_MODE_INPUT(GPIOE_PIN6) | \ + PIN_MODE_INPUT(GPIOE_PIN7) | \ + PIN_MODE_INPUT(GPIOE_PIN8) | \ + PIN_MODE_INPUT(GPIOE_PIN9) | \ + PIN_MODE_INPUT(GPIOE_PIN10) | \ + PIN_MODE_INPUT(GPIOE_PIN11) | \ + PIN_MODE_INPUT(GPIOE_PIN12) | \ + PIN_MODE_INPUT(GPIOE_PIN13) | \ + PIN_MODE_INPUT(GPIOE_PIN14) | \ + PIN_MODE_INPUT(GPIOE_PIN15)) +#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOE_PIN15)) +#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_HIGH(GPIOE_PIN0) | \ + PIN_OSPEED_HIGH(GPIOE_PIN1) | \ + PIN_OSPEED_HIGH(GPIOE_PIN2) | \ + PIN_OSPEED_HIGH(GPIOE_PIN3) | \ + PIN_OSPEED_HIGH(GPIOE_PIN4) | \ + PIN_OSPEED_HIGH(GPIOE_PIN5) | \ + PIN_OSPEED_HIGH(GPIOE_PIN6) | \ + PIN_OSPEED_HIGH(GPIOE_PIN7) | \ + PIN_OSPEED_HIGH(GPIOE_PIN8) | \ + PIN_OSPEED_HIGH(GPIOE_PIN9) | \ + PIN_OSPEED_HIGH(GPIOE_PIN10) | \ + PIN_OSPEED_HIGH(GPIOE_PIN11) | \ + PIN_OSPEED_HIGH(GPIOE_PIN12) | \ + PIN_OSPEED_HIGH(GPIOE_PIN13) | \ + PIN_OSPEED_HIGH(GPIOE_PIN14) | \ + PIN_OSPEED_HIGH(GPIOE_PIN15)) +#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOE_PIN15)) +#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | \ + PIN_ODR_HIGH(GPIOE_PIN1) | \ + PIN_ODR_HIGH(GPIOE_PIN2) | \ + PIN_ODR_HIGH(GPIOE_PIN3) | \ + PIN_ODR_HIGH(GPIOE_PIN4) | \ + PIN_ODR_HIGH(GPIOE_PIN5) | \ + PIN_ODR_HIGH(GPIOE_PIN6) | \ + PIN_ODR_HIGH(GPIOE_PIN7) | \ + PIN_ODR_HIGH(GPIOE_PIN8) | \ + PIN_ODR_HIGH(GPIOE_PIN9) | \ + PIN_ODR_HIGH(GPIOE_PIN10) | \ + PIN_ODR_HIGH(GPIOE_PIN11) | \ + PIN_ODR_HIGH(GPIOE_PIN12) | \ + PIN_ODR_HIGH(GPIOE_PIN13) | \ + PIN_ODR_HIGH(GPIOE_PIN14) | \ + PIN_ODR_HIGH(GPIOE_PIN15)) +#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN1, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN3, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN4, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN5, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN6, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN7, 0U)) +#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN9, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN10, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN11, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN12, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN13, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN14, 0U) | \ + PIN_AFIO_AF(GPIOE_PIN15, 0U)) + +/* + * GPIOF setup: + * + * PF0 - PIN0 (input pullup). + * PF1 - PIN1 (input pullup). + * PF2 - PIN2 (input pullup). + * PF3 - PIN3 (input pullup). + * PF4 - PIN4 (input pullup). + * PF5 - PIN5 (input pullup). + * PF6 - PIN6 (input pullup). + * PF7 - PIN7 (input pullup). + * PF8 - PIN8 (input pullup). + * PF9 - PIN9 (input pullup). + * PF10 - PIN10 (input pullup). + * PF11 - PIN11 (input pullup). + * PF12 - PIN12 (input pullup). + * PF13 - PIN13 (input pullup). + * PF14 - PIN14 (input pullup). + * PF15 - PIN15 (input pullup). + */ +#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_PIN0) | \ + PIN_MODE_INPUT(GPIOF_PIN1) | \ + PIN_MODE_INPUT(GPIOF_PIN2) | \ + PIN_MODE_INPUT(GPIOF_PIN3) | \ + PIN_MODE_INPUT(GPIOF_PIN4) | \ + PIN_MODE_INPUT(GPIOF_PIN5) | \ + PIN_MODE_INPUT(GPIOF_PIN6) | \ + PIN_MODE_INPUT(GPIOF_PIN7) | \ + PIN_MODE_INPUT(GPIOF_PIN8) | \ + PIN_MODE_INPUT(GPIOF_PIN9) | \ + PIN_MODE_INPUT(GPIOF_PIN10) | \ + PIN_MODE_INPUT(GPIOF_PIN11) | \ + PIN_MODE_INPUT(GPIOF_PIN12) | \ + PIN_MODE_INPUT(GPIOF_PIN13) | \ + PIN_MODE_INPUT(GPIOF_PIN14) | \ + PIN_MODE_INPUT(GPIOF_PIN15)) +#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOF_PIN15)) +#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_HIGH(GPIOF_PIN0) | \ + PIN_OSPEED_HIGH(GPIOF_PIN1) | \ + PIN_OSPEED_HIGH(GPIOF_PIN2) | \ + PIN_OSPEED_HIGH(GPIOF_PIN3) | \ + PIN_OSPEED_HIGH(GPIOF_PIN4) | \ + PIN_OSPEED_HIGH(GPIOF_PIN5) | \ + PIN_OSPEED_HIGH(GPIOF_PIN6) | \ + PIN_OSPEED_HIGH(GPIOF_PIN7) | \ + PIN_OSPEED_HIGH(GPIOF_PIN8) | \ + PIN_OSPEED_HIGH(GPIOF_PIN9) | \ + PIN_OSPEED_HIGH(GPIOF_PIN10) | \ + PIN_OSPEED_HIGH(GPIOF_PIN11) | \ + PIN_OSPEED_HIGH(GPIOF_PIN12) | \ + PIN_OSPEED_HIGH(GPIOF_PIN13) | \ + PIN_OSPEED_HIGH(GPIOF_PIN14) | \ + PIN_OSPEED_HIGH(GPIOF_PIN15)) +#define VAL_GPIOF_PUPDR (PIN_PUPDR_PULLUP(GPIOF_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOF_PIN15)) +#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_PIN0) | \ + PIN_ODR_HIGH(GPIOF_PIN1) | \ + PIN_ODR_HIGH(GPIOF_PIN2) | \ + PIN_ODR_HIGH(GPIOF_PIN3) | \ + PIN_ODR_HIGH(GPIOF_PIN4) | \ + PIN_ODR_HIGH(GPIOF_PIN5) | \ + PIN_ODR_HIGH(GPIOF_PIN6) | \ + PIN_ODR_HIGH(GPIOF_PIN7) | \ + PIN_ODR_HIGH(GPIOF_PIN8) | \ + PIN_ODR_HIGH(GPIOF_PIN9) | \ + PIN_ODR_HIGH(GPIOF_PIN10) | \ + PIN_ODR_HIGH(GPIOF_PIN11) | \ + PIN_ODR_HIGH(GPIOF_PIN12) | \ + PIN_ODR_HIGH(GPIOF_PIN13) | \ + PIN_ODR_HIGH(GPIOF_PIN14) | \ + PIN_ODR_HIGH(GPIOF_PIN15)) +#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_PIN0, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN1, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN3, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN4, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN5, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN6, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN7, 0U)) +#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN9, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN10, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN11, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN12, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN13, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN14, 0U) | \ + PIN_AFIO_AF(GPIOF_PIN15, 0U)) + +/* + * GPIOG setup: + * + * PG0 - PIN0 (input pullup). + * PG1 - PIN1 (input pullup). + * PG2 - PIN2 (input pullup). + * PG3 - PIN3 (input pullup). + * PG4 - PIN4 (input pullup). + * PG5 - PIN5 (input pullup). + * PG6 - PIN6 (input pullup). + * PG7 - PIN7 (input pullup). + * PG8 - PIN8 (input pullup). + * PG9 - PIN9 (input pullup). + * PG10 - PIN10 (input pullup). + * PG11 - PIN11 (input pullup). + * PG12 - PIN12 (input pullup). + * PG13 - PIN13 (input pullup). + * PG14 - PIN14 (input pullup). + * PG15 - PIN15 (input pullup). + */ +#define VAL_GPIOG_MODER (PIN_MODE_INPUT(GPIOG_PIN0) | \ + PIN_MODE_INPUT(GPIOG_PIN1) | \ + PIN_MODE_INPUT(GPIOG_PIN2) | \ + PIN_MODE_INPUT(GPIOG_PIN3) | \ + PIN_MODE_INPUT(GPIOG_PIN4) | \ + PIN_MODE_INPUT(GPIOG_PIN5) | \ + PIN_MODE_INPUT(GPIOG_PIN6) | \ + PIN_MODE_INPUT(GPIOG_PIN7) | \ + PIN_MODE_INPUT(GPIOG_PIN8) | \ + PIN_MODE_INPUT(GPIOG_PIN9) | \ + PIN_MODE_INPUT(GPIOG_PIN10) | \ + PIN_MODE_INPUT(GPIOG_PIN11) | \ + PIN_MODE_INPUT(GPIOG_PIN12) | \ + PIN_MODE_INPUT(GPIOG_PIN13) | \ + PIN_MODE_INPUT(GPIOG_PIN14) | \ + PIN_MODE_INPUT(GPIOG_PIN15)) +#define VAL_GPIOG_OTYPER (PIN_OTYPE_PUSHPULL(GPIOG_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOG_PIN15)) +#define VAL_GPIOG_OSPEEDR (PIN_OSPEED_HIGH(GPIOG_PIN0) | \ + PIN_OSPEED_HIGH(GPIOG_PIN1) | \ + PIN_OSPEED_HIGH(GPIOG_PIN2) | \ + PIN_OSPEED_HIGH(GPIOG_PIN3) | \ + PIN_OSPEED_HIGH(GPIOG_PIN4) | \ + PIN_OSPEED_HIGH(GPIOG_PIN5) | \ + PIN_OSPEED_HIGH(GPIOG_PIN6) | \ + PIN_OSPEED_HIGH(GPIOG_PIN7) | \ + PIN_OSPEED_HIGH(GPIOG_PIN8) | \ + PIN_OSPEED_HIGH(GPIOG_PIN9) | \ + PIN_OSPEED_HIGH(GPIOG_PIN10) | \ + PIN_OSPEED_HIGH(GPIOG_PIN11) | \ + PIN_OSPEED_HIGH(GPIOG_PIN12) | \ + PIN_OSPEED_HIGH(GPIOG_PIN13) | \ + PIN_OSPEED_HIGH(GPIOG_PIN14) | \ + PIN_OSPEED_HIGH(GPIOG_PIN15)) +#define VAL_GPIOG_PUPDR (PIN_PUPDR_PULLUP(GPIOG_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOG_PIN15)) +#define VAL_GPIOG_ODR (PIN_ODR_HIGH(GPIOG_PIN0) | \ + PIN_ODR_HIGH(GPIOG_PIN1) | \ + PIN_ODR_HIGH(GPIOG_PIN2) | \ + PIN_ODR_HIGH(GPIOG_PIN3) | \ + PIN_ODR_HIGH(GPIOG_PIN4) | \ + PIN_ODR_HIGH(GPIOG_PIN5) | \ + PIN_ODR_HIGH(GPIOG_PIN6) | \ + PIN_ODR_HIGH(GPIOG_PIN7) | \ + PIN_ODR_HIGH(GPIOG_PIN8) | \ + PIN_ODR_HIGH(GPIOG_PIN9) | \ + PIN_ODR_HIGH(GPIOG_PIN10) | \ + PIN_ODR_HIGH(GPIOG_PIN11) | \ + PIN_ODR_HIGH(GPIOG_PIN12) | \ + PIN_ODR_HIGH(GPIOG_PIN13) | \ + PIN_ODR_HIGH(GPIOG_PIN14) | \ + PIN_ODR_HIGH(GPIOG_PIN15)) +#define VAL_GPIOG_AFRL (PIN_AFIO_AF(GPIOG_PIN0, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN1, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN3, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN4, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN5, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN6, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN7, 0U)) +#define VAL_GPIOG_AFRH (PIN_AFIO_AF(GPIOG_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN9, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN10, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN11, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN12, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN13, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN14, 0U) | \ + PIN_AFIO_AF(GPIOG_PIN15, 0U)) + +/* + * GPIOH setup: + * + * PH0 - OSC_IN (input floating). + * PH1 - OSC_OUT (input floating). + * PH2 - PIN2 (input pullup). + * PH3 - PIN3 (input pullup). + * PH4 - PIN4 (input pullup). + * PH5 - PIN5 (input pullup). + * PH6 - PIN6 (input pullup). + * PH7 - PIN7 (input pullup). + * PH8 - PIN8 (input pullup). + * PH9 - PIN9 (input pullup). + * PH10 - PIN10 (input pullup). + * PH11 - PIN11 (input pullup). + * PH12 - PIN12 (input pullup). + * PH13 - PIN13 (input pullup). + * PH14 - PIN14 (input pullup). + * PH15 - PIN15 (input pullup). + */ +#define VAL_GPIOH_MODER (PIN_MODE_INPUT(GPIOH_OSC_IN) | \ + PIN_MODE_INPUT(GPIOH_OSC_OUT) | \ + PIN_MODE_INPUT(GPIOH_PIN2) | \ + PIN_MODE_INPUT(GPIOH_PIN3) | \ + PIN_MODE_INPUT(GPIOH_PIN4) | \ + PIN_MODE_INPUT(GPIOH_PIN5) | \ + PIN_MODE_INPUT(GPIOH_PIN6) | \ + PIN_MODE_INPUT(GPIOH_PIN7) | \ + PIN_MODE_INPUT(GPIOH_PIN8) | \ + PIN_MODE_INPUT(GPIOH_PIN9) | \ + PIN_MODE_INPUT(GPIOH_PIN10) | \ + PIN_MODE_INPUT(GPIOH_PIN11) | \ + PIN_MODE_INPUT(GPIOH_PIN12) | \ + PIN_MODE_INPUT(GPIOH_PIN13) | \ + PIN_MODE_INPUT(GPIOH_PIN14) | \ + PIN_MODE_INPUT(GPIOH_PIN15)) +#define VAL_GPIOH_OTYPER (PIN_OTYPE_PUSHPULL(GPIOH_OSC_IN) | \ + PIN_OTYPE_PUSHPULL(GPIOH_OSC_OUT) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOH_PIN15)) +#define VAL_GPIOH_OSPEEDR (PIN_OSPEED_HIGH(GPIOH_OSC_IN) | \ + PIN_OSPEED_HIGH(GPIOH_OSC_OUT) | \ + PIN_OSPEED_HIGH(GPIOH_PIN2) | \ + PIN_OSPEED_HIGH(GPIOH_PIN3) | \ + PIN_OSPEED_HIGH(GPIOH_PIN4) | \ + PIN_OSPEED_HIGH(GPIOH_PIN5) | \ + PIN_OSPEED_HIGH(GPIOH_PIN6) | \ + PIN_OSPEED_HIGH(GPIOH_PIN7) | \ + PIN_OSPEED_HIGH(GPIOH_PIN8) | \ + PIN_OSPEED_HIGH(GPIOH_PIN9) | \ + PIN_OSPEED_HIGH(GPIOH_PIN10) | \ + PIN_OSPEED_HIGH(GPIOH_PIN11) | \ + PIN_OSPEED_HIGH(GPIOH_PIN12) | \ + PIN_OSPEED_HIGH(GPIOH_PIN13) | \ + PIN_OSPEED_HIGH(GPIOH_PIN14) | \ + PIN_OSPEED_HIGH(GPIOH_PIN15)) +#define VAL_GPIOH_PUPDR (PIN_PUPDR_FLOATING(GPIOH_OSC_IN) | \ + PIN_PUPDR_FLOATING(GPIOH_OSC_OUT) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOH_PIN15)) +#define VAL_GPIOH_ODR (PIN_ODR_HIGH(GPIOH_OSC_IN) | \ + PIN_ODR_HIGH(GPIOH_OSC_OUT) | \ + PIN_ODR_HIGH(GPIOH_PIN2) | \ + PIN_ODR_HIGH(GPIOH_PIN3) | \ + PIN_ODR_HIGH(GPIOH_PIN4) | \ + PIN_ODR_HIGH(GPIOH_PIN5) | \ + PIN_ODR_HIGH(GPIOH_PIN6) | \ + PIN_ODR_HIGH(GPIOH_PIN7) | \ + PIN_ODR_HIGH(GPIOH_PIN8) | \ + PIN_ODR_HIGH(GPIOH_PIN9) | \ + PIN_ODR_HIGH(GPIOH_PIN10) | \ + PIN_ODR_HIGH(GPIOH_PIN11) | \ + PIN_ODR_HIGH(GPIOH_PIN12) | \ + PIN_ODR_HIGH(GPIOH_PIN13) | \ + PIN_ODR_HIGH(GPIOH_PIN14) | \ + PIN_ODR_HIGH(GPIOH_PIN15)) +#define VAL_GPIOH_AFRL (PIN_AFIO_AF(GPIOH_OSC_IN, 0U) | \ + PIN_AFIO_AF(GPIOH_OSC_OUT, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN3, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN4, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN5, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN6, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN7, 0U)) +#define VAL_GPIOH_AFRH (PIN_AFIO_AF(GPIOH_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN9, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN10, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN11, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN12, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN13, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN14, 0U) | \ + PIN_AFIO_AF(GPIOH_PIN15, 0U)) + +/* + * GPIOI setup: + * + * PI0 - PIN0 (input pullup). + * PI1 - PIN1 (input pullup). + * PI2 - PIN2 (input pullup). + * PI3 - PIN3 (input pullup). + * PI4 - PIN4 (input pullup). + * PI5 - PIN5 (input pullup). + * PI6 - PIN6 (input pullup). + * PI7 - PIN7 (input pullup). + * PI8 - PIN8 (input pullup). + * PI9 - PIN9 (input pullup). + * PI10 - PIN10 (input pullup). + * PI11 - PIN11 (input pullup). + * PI12 - PIN12 (input pullup). + * PI13 - PIN13 (input pullup). + * PI14 - PIN14 (input pullup). + * PI15 - PIN15 (input pullup). + */ +#define VAL_GPIOI_MODER (PIN_MODE_INPUT(GPIOI_PIN0) | \ + PIN_MODE_INPUT(GPIOI_PIN1) | \ + PIN_MODE_INPUT(GPIOI_PIN2) | \ + PIN_MODE_INPUT(GPIOI_PIN3) | \ + PIN_MODE_INPUT(GPIOI_PIN4) | \ + PIN_MODE_INPUT(GPIOI_PIN5) | \ + PIN_MODE_INPUT(GPIOI_PIN6) | \ + PIN_MODE_INPUT(GPIOI_PIN7) | \ + PIN_MODE_INPUT(GPIOI_PIN8) | \ + PIN_MODE_INPUT(GPIOI_PIN9) | \ + PIN_MODE_INPUT(GPIOI_PIN10) | \ + PIN_MODE_INPUT(GPIOI_PIN11) | \ + PIN_MODE_INPUT(GPIOI_PIN12) | \ + PIN_MODE_INPUT(GPIOI_PIN13) | \ + PIN_MODE_INPUT(GPIOI_PIN14) | \ + PIN_MODE_INPUT(GPIOI_PIN15)) +#define VAL_GPIOI_OTYPER (PIN_OTYPE_PUSHPULL(GPIOI_PIN0) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN1) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN2) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN3) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN4) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN5) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN6) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN7) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN8) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN9) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN10) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN11) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN12) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN13) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN14) | \ + PIN_OTYPE_PUSHPULL(GPIOI_PIN15)) +#define VAL_GPIOI_OSPEEDR (PIN_OSPEED_HIGH(GPIOI_PIN0) | \ + PIN_OSPEED_HIGH(GPIOI_PIN1) | \ + PIN_OSPEED_HIGH(GPIOI_PIN2) | \ + PIN_OSPEED_HIGH(GPIOI_PIN3) | \ + PIN_OSPEED_HIGH(GPIOI_PIN4) | \ + PIN_OSPEED_HIGH(GPIOI_PIN5) | \ + PIN_OSPEED_HIGH(GPIOI_PIN6) | \ + PIN_OSPEED_HIGH(GPIOI_PIN7) | \ + PIN_OSPEED_HIGH(GPIOI_PIN8) | \ + PIN_OSPEED_HIGH(GPIOI_PIN9) | \ + PIN_OSPEED_HIGH(GPIOI_PIN10) | \ + PIN_OSPEED_HIGH(GPIOI_PIN11) | \ + PIN_OSPEED_HIGH(GPIOI_PIN12) | \ + PIN_OSPEED_HIGH(GPIOI_PIN13) | \ + PIN_OSPEED_HIGH(GPIOI_PIN14) | \ + PIN_OSPEED_HIGH(GPIOI_PIN15)) +#define VAL_GPIOI_PUPDR (PIN_PUPDR_PULLUP(GPIOI_PIN0) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN1) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN2) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN3) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN4) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN5) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN6) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN7) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN8) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN9) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN10) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN11) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN12) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN13) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN14) | \ + PIN_PUPDR_PULLUP(GPIOI_PIN15)) +#define VAL_GPIOI_ODR (PIN_ODR_HIGH(GPIOI_PIN0) | \ + PIN_ODR_HIGH(GPIOI_PIN1) | \ + PIN_ODR_HIGH(GPIOI_PIN2) | \ + PIN_ODR_HIGH(GPIOI_PIN3) | \ + PIN_ODR_HIGH(GPIOI_PIN4) | \ + PIN_ODR_HIGH(GPIOI_PIN5) | \ + PIN_ODR_HIGH(GPIOI_PIN6) | \ + PIN_ODR_HIGH(GPIOI_PIN7) | \ + PIN_ODR_HIGH(GPIOI_PIN8) | \ + PIN_ODR_HIGH(GPIOI_PIN9) | \ + PIN_ODR_HIGH(GPIOI_PIN10) | \ + PIN_ODR_HIGH(GPIOI_PIN11) | \ + PIN_ODR_HIGH(GPIOI_PIN12) | \ + PIN_ODR_HIGH(GPIOI_PIN13) | \ + PIN_ODR_HIGH(GPIOI_PIN14) | \ + PIN_ODR_HIGH(GPIOI_PIN15)) +#define VAL_GPIOI_AFRL (PIN_AFIO_AF(GPIOI_PIN0, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN1, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN2, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN3, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN4, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN5, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN6, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN7, 0U)) +#define VAL_GPIOI_AFRH (PIN_AFIO_AF(GPIOI_PIN8, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN9, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN10, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN11, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN12, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN13, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN14, 0U) | \ + PIN_AFIO_AF(GPIOI_PIN15, 0U)) + + +#if !defined(_FROM_ASM_) +#ifdef __cplusplus +extern "C" { +#endif + void boardInit(void); +#ifdef __cplusplus +} +#endif +#endif /* _FROM_ASM_ */ + +#endif /* BOARD_H */ diff --git a/keyboards/matrix/abelx/boards/abelx_bd/board.mk b/keyboards/matrix/abelx/boards/abelx_bd/board.mk new file mode 100644 index 0000000000..a4404001f4 --- /dev/null +++ b/keyboards/matrix/abelx/boards/abelx_bd/board.mk @@ -0,0 +1,9 @@ +# List of all the board related files. +BOARDSRC = $(BOARD_PATH)/boards/abelx_bd/board.c + +# Required include directories +BOARDINC = $(BOARD_PATH)/boards/abelx_bd + +# Shared variables +ALLCSRC += $(BOARDSRC) +ALLINC += $(BOARDINC) diff --git a/keyboards/matrix/abelx/bootloader_defs.h b/keyboards/matrix/abelx/bootloader_defs.h new file mode 100644 index 0000000000..20b8f73e6f --- /dev/null +++ b/keyboards/matrix/abelx/bootloader_defs.h @@ -0,0 +1,7 @@ +/* Address for jumping to bootloader on STM32 chips. */ +/* It is chip dependent, the correct number can be looked up here: + * http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf + * This also requires a patch to chibios: + * /tmk_core/tool/chibios/ch-bootloader-jump.patch + */ +#define STM32_BOOTLOADER_ADDRESS 0x1FFF0000 diff --git a/keyboards/matrix/abelx/chconf.h b/keyboards/matrix/abelx/chconf.h new file mode 100644 index 0000000000..7dc4f84a8a --- /dev/null +++ b/keyboards/matrix/abelx/chconf.h @@ -0,0 +1,714 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file rt/templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H + +#define _CHIBIOS_RT_CONF_ +#define _CHIBIOS_RT_CONF_VER_6_0_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_ST_RESOLUTION) +#define CH_CFG_ST_RESOLUTION 32 +#endif + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#if !defined(CH_CFG_ST_FREQUENCY) +#define CH_CFG_ST_FREQUENCY 10000 +#endif + +/** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#if !defined(CH_CFG_INTERVALS_SIZE) +#define CH_CFG_INTERVALS_SIZE 32 +#endif + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_TIME_TYPES_SIZE) +#define CH_CFG_TIME_TYPES_SIZE 32 +#endif + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#if !defined(CH_CFG_ST_TIMEDELTA) +#define CH_CFG_ST_TIMEDELTA 2 +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#if !defined(CH_CFG_TIME_QUANTUM) +#define CH_CFG_TIME_QUANTUM 0 +#endif + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#if !defined(CH_CFG_MEMCORE_SIZE) +#define CH_CFG_MEMCORE_SIZE 0 +#endif + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#if !defined(CH_CFG_NO_IDLE_THREAD) +#define CH_CFG_NO_IDLE_THREAD FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_OPTIMIZE_SPEED) +#define CH_CFG_OPTIMIZE_SPEED TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_TM) +#define CH_CFG_USE_TM TRUE +#endif + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_REGISTRY) +#define CH_CFG_USE_REGISTRY TRUE +#endif + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_WAITEXIT) +#define CH_CFG_USE_WAITEXIT TRUE +#endif + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_SEMAPHORES) +#define CH_CFG_USE_SEMAPHORES TRUE +#endif + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE +#endif + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MUTEXES) +#define CH_CFG_USE_MUTEXES TRUE +#endif + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE +#endif + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#if !defined(CH_CFG_USE_CONDVARS) +#define CH_CFG_USE_CONDVARS TRUE +#endif + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE +#endif + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_EVENTS) +#define CH_CFG_USE_EVENTS TRUE +#endif + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE +#endif + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MESSAGES) +#define CH_CFG_USE_MESSAGES TRUE +#endif + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE +#endif + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#if !defined(CH_CFG_USE_MAILBOXES) +#define CH_CFG_USE_MAILBOXES TRUE +#endif + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MEMCORE) +#define CH_CFG_USE_MEMCORE TRUE +#endif + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#if !defined(CH_CFG_USE_HEAP) +#define CH_CFG_USE_HEAP TRUE +#endif + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MEMPOOLS) +#define CH_CFG_USE_MEMPOOLS TRUE +#endif + +/** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_OBJ_FIFOS) +#define CH_CFG_USE_OBJ_FIFOS TRUE +#endif + +/** + * @brief Pipes APIs. + * @details If enabled then the pipes APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_PIPES) +#define CH_CFG_USE_PIPES TRUE +#endif + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#if !defined(CH_CFG_USE_DYNAMIC) +#define CH_CFG_USE_DYNAMIC TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_CFG_USE_FACTORY) +#define CH_CFG_USE_FACTORY TRUE +#endif + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 +#endif + +/** + * @brief Enables the registry of generic objects. + */ +#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE +#endif + +/** + * @brief Enables factory for generic buffers. + */ +#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE +#endif + +/** + * @brief Enables factory for semaphores. + */ +#if !defined(CH_CFG_FACTORY_SEMAPHORES) +#define CH_CFG_FACTORY_SEMAPHORES TRUE +#endif + +/** + * @brief Enables factory for mailboxes. + */ +#if !defined(CH_CFG_FACTORY_MAILBOXES) +#define CH_CFG_FACTORY_MAILBOXES TRUE +#endif + +/** + * @brief Enables factory for objects FIFOs. + */ +#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE +#endif + +/** + * @brief Enables factory for Pipes. + */ +#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) +#define CH_CFG_FACTORY_PIPES TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_STATISTICS) +#define CH_DBG_STATISTICS FALSE +#endif + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_SYSTEM_STATE_CHECK) +#define CH_DBG_SYSTEM_STATE_CHECK FALSE +#endif + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_CHECKS) +#define CH_DBG_ENABLE_CHECKS FALSE +#endif + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_ASSERTS) +#define CH_DBG_ENABLE_ASSERTS FALSE +#endif + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the trace buffer is activated. + * + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_MASK) +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED +#endif + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_BUFFER_SIZE) +#define CH_DBG_TRACE_BUFFER_SIZE 128 +#endif + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#if !defined(CH_DBG_ENABLE_STACK_CHECK) +#define CH_DBG_ENABLE_STACK_CHECK FALSE +#endif + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_FILL_THREADS) +#define CH_DBG_FILL_THREADS FALSE +#endif + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#if !defined(CH_DBG_THREADS_PROFILING) +#define CH_DBG_THREADS_PROFILING FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK() { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p _thread_init() function. + * + * @note It is invoked from within @p _thread_init() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* CHCONF_H */ + +/** @} */ diff --git a/keyboards/matrix/abelx/config.h b/keyboards/matrix/abelx/config.h new file mode 100644 index 0000000000..145bb30993 --- /dev/null +++ b/keyboards/matrix/abelx/config.h @@ -0,0 +1,108 @@ +/** + * config.h + * + * Copyright 2020 astro + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4D58 // MX +#define PRODUCT_ID 0xAB87 // abelx keyboard +#define DEVICE_VER 0x0001 +#define MANUFACTURER MATRIX +#define PRODUCT ABELX + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 16 + +#define DEF_PIN(port, pin) (((port) << 8) | pin) +#define GET_PORT(pp) (((pp) >> 8) & 0xFF) +#define GET_PIN(pp) ((pp) & 0xFF) + +#define MATRIX_ROW_PINS { \ + DEF_PIN(TCA6424_PORT2, 7), \ + DEF_PIN(TCA6424_PORT2, 6), \ + DEF_PIN(TCA6424_PORT2, 0), \ + DEF_PIN(TCA6424_PORT2, 2), \ + DEF_PIN(TCA6424_PORT2, 4), \ + DEF_PIN(TCA6424_PORT2, 5) } + +#define MATRIX_COL_PINS { \ + DEF_PIN(TCA6424_PORT2, 1), \ + DEF_PIN(TCA6424_PORT1, 7), \ + DEF_PIN(TCA6424_PORT1, 6), \ + DEF_PIN(TCA6424_PORT1, 5), \ + DEF_PIN(TCA6424_PORT1, 4), \ + DEF_PIN(TCA6424_PORT1, 3), \ + DEF_PIN(TCA6424_PORT1, 2), \ + DEF_PIN(TCA6424_PORT1, 1), \ + DEF_PIN(TCA6424_PORT1, 0), \ + DEF_PIN(TCA6424_PORT0, 7), \ + DEF_PIN(TCA6424_PORT0, 6), \ + DEF_PIN(TCA6424_PORT0, 5), \ + DEF_PIN(TCA6424_PORT0, 4), \ + DEF_PIN(TCA6424_PORT0, 3), \ + DEF_PIN(TCA6424_PORT0, 2), \ + DEF_PIN(TCA6424_PORT0, 1) } + +#define ROW1_MASK 0x80 +#define ROW2_MASK 0x40 +#define ROW3_MASK 0x01 +#define ROW4_MASK 0x04 +#define ROW5_MASK 0x10 +#define ROW6_MASK 0x20 +#define ROW_PORT TCA6424_PORT2 + +#define COL1_MASK 0x02 +#define COL2_MASK 0x80 +#define COL3_MASK 0x40 +#define COL4_MASK 0x20 +#define COL5_MASK 0x10 +#define COL6_MASK 0x08 +#define COL7_MASK 0x04 +#define COL8_MASK 0x02 +#define COL9_MASK 0x01 +#define COL10_MASK 0x80 +#define COL11_MASK 0x40 +#define COL12_MASK 0x20 +#define COL13_MASK 0x10 +#define COL14_MASK 0x08 +#define COL15_MASK 0x04 +#define COL16_MASK 0x02 + +#define UNUSED_PINS + +#define DIODE_DIRECTION COL2ROW +#define DEBOUNCE 5 + +// i2c setting +#define USE_I2CV1 +#define I2C1_SCL 8 +#define I2C1_SDA 9 +#define I2C1_CLOCK_SPEED 400000 +#define I2C1_DUTY_CYCLE FAST_DUTY_CYCLE_2 + + +// rgb light setting +#define RGBLED_NUM 9 +#define RGB_DI_PIN B4 +#define RGBLIGHT_ANIMATIONS + +#define AW9523B_RGB_NUM 4 + +#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP FALSE diff --git a/keyboards/matrix/abelx/halconf.h b/keyboards/matrix/abelx/halconf.h new file mode 100644 index 0000000000..fb5a760728 --- /dev/null +++ b/keyboards/matrix/abelx/halconf.h @@ -0,0 +1,525 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H + +#define _CHIBIOS_HAL_CONF_ +#define _CHIBIOS_HAL_CONF_VER_7_0_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C TRUE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC TRUE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SIO subsystem. + */ +#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) +#define HAL_USE_SIO FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the TRNG subsystem. + */ +#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) +#define HAL_USE_TRNG FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART TRUE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/** + * @brief Enables the WSPI subsystem. + */ +#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) +#define HAL_USE_WSPI FALSE +#endif + +/*===========================================================================*/ +/* PAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) +#define PAL_USE_CALLBACKS FALSE +#endif + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) +#define PAL_USE_WAIT FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/** + * @brief Enforces the driver to use direct callbacks rather than OSAL events. + */ +#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) +#define CAN_ENFORCE_USE_CALLBACKS FALSE +#endif + +/*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ +/* DAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) +#define DAC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define DAC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the zero-copy API. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/** + * @brief OCR initialization constant for V20 cards. + */ +#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) +#define SDC_INIT_OCR_V20 0x50FF8000U +#endif + +/** + * @brief OCR initialization constant for non-V20 cards. + */ +#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) +#define SDC_INIT_OCR 0x80100000U +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables circular transfers APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) +#define SPI_USE_CIRCULAR FALSE +#endif + + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION FALSE +#endif + +/** + * @brief Handling method for SPI CS line. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) +#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT TRUE +#endif + +/*===========================================================================*/ +/* WSPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) +#define WSPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define WSPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* HALCONF_H */ + +/** @} */ diff --git a/keyboards/matrix/abelx/info.json b/keyboards/matrix/abelx/info.json new file mode 100644 index 0000000000..18bed65bc0 --- /dev/null +++ b/keyboards/matrix/abelx/info.json @@ -0,0 +1,15 @@ +{ + "keyboard_name": "Matrix ABELX keyboard", + "url": "", + "maintainer": "qmk", + "width": 18.25, + "height": 6.5, + "layouts": { + "LAYOUT_tkl_ansi": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"|", "x":13.5, "y":2.5, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"Shift", "x":0, "y":4.5, "w":2.25}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25},{"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}] + }, + "LAYOUT_tkl_iso": { + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"\u00ac", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"\"", "x":2, "y":1.5}, {"label":"\u00a3", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":7, "y":1.5}, {"label":"*", "x":8, "y":1.5}, {"label":"(", "x":9, "y":1.5}, {"label":")", "x":10, "y":1.5}, {"label":"_", "x":11, "y":1.5}, {"label":"+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Insert", "x":15.25, "y":1.5}, {"label":"Home", "x":16.25, "y":1.5}, {"label":"PgUp", "x":17.25, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":6.5, "y":2.5}, {"label":"U", "x":7.5, "y":2.5}, {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, {"label":"{", "x":11.5, "y":2.5}, {"label":"}", "x":12.5, "y":2.5}, {"label":"Delete", "x":15.25, "y":2.5}, {"label":"End", "x":16.25, "y":2.5}, {"label":"PgDn", "x":17.25, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":6.75, "y":3.5}, {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, {"label":":", "x":10.75, "y":3.5}, {"label":"@", "x":11.75, "y":3.5}, {"label":"~", "x":12.75, "y":3.5}, {"label":"Enter", "x":13.75, "y":2.5, "w":1.25, "h":2}, {"label":"Shift", "x":0, "y":4.5, "w":1.25}, {"label":"|", "x":1.25, "y":4.5}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, {"label":"<", "x":9.25, "y":4.5}, {"label":">", "x":10.25, "y":4.5}, {"label":"?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":2.75}, {"label":"\u2191", "x":16.25, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Win", "x":11.25, "y":5.5, "w":1.25},{"label":"Menu", "x":12.5, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":13.75, "y":5.5, "w":1.25}, {"label":"\u2190", "x":15.25, "y":5.5}, {"label":"\u2193", "x":16.25, "y":5.5}, {"label":"\u2192", "x":17.25, "y":5.5}] + } + } +} diff --git a/keyboards/matrix/abelx/keymaps/default/keymap.c b/keyboards/matrix/abelx/keymaps/default/keymap.c new file mode 100644 index 0000000000..ecba6d6d15 --- /dev/null +++ b/keyboards/matrix/abelx/keymaps/default/keymap.c @@ -0,0 +1,41 @@ +/** + * keymap.c + * + * Copyright 2020 astro + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0]=LAYOUT_tkl_ansi( + + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, LT(1,KC_PAUS), + + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT,KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT), + + [1]=LAYOUT_tkl_ansi( + KC_MUTE, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + KC_NLCK, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, + _______, _______, _______, KC_MPLY, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT), +}; diff --git a/keyboards/matrix/abelx/keymaps/iso/keymap.c b/keyboards/matrix/abelx/keymaps/iso/keymap.c new file mode 100644 index 0000000000..81cfcd74d2 --- /dev/null +++ b/keyboards/matrix/abelx/keymaps/iso/keymap.c @@ -0,0 +1,39 @@ +/** + * keymap.c + * + * Copyright 2020 astro + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0]=LAYOUT_tkl_iso( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, LT(1,KC_PAUS), + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, + KC_LSFT, KC_LGUI, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT,KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), + + [1]=LAYOUT_tkl_iso( + KC_MUTE, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + KC_NLCK, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_VOLU, + _______, _______, _______, KC_MPLY, _______, _______, _______, _______, KC_MPRV, KC_VOLD, KC_MNXT), +}; diff --git a/keyboards/matrix/abelx/ld/abelx_boot.ld b/keyboards/matrix/abelx/ld/abelx_boot.ld new file mode 100644 index 0000000000..3abdd1529b --- /dev/null +++ b/keyboards/matrix/abelx/ld/abelx_boot.ld @@ -0,0 +1,85 @@ +/* + ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * STM32F411xE memory setup. + */ +MEMORY +{ + flash0 : org = 0x08020000, len = 512k-128k + flash1 : org = 0x00000000, len = 0 + flash2 : org = 0x00000000, len = 0 + flash3 : org = 0x00000000, len = 0 + flash4 : org = 0x00000000, len = 0 + flash5 : org = 0x00000000, len = 0 + flash6 : org = 0x00000000, len = 0 + flash7 : org = 0x00000000, len = 0 + ram0 : org = 0x20000000, len = 128k + ram1 : org = 0x00000000, len = 0 + ram2 : org = 0x00000000, len = 0 + ram3 : org = 0x00000000, len = 0 + ram4 : org = 0x00000000, len = 0 + ram5 : org = 0x00000000, len = 0 + ram6 : org = 0x00000000, len = 0 + ram7 : org = 0x00000000, len = 0 +} + +/* For each data/text section two region are defined, a virtual region + and a load region (_LMA suffix).*/ + +/* Flash region to be used for exception vectors.*/ +REGION_ALIAS("VECTORS_FLASH", flash0); +REGION_ALIAS("VECTORS_FLASH_LMA", flash0); + +/* Flash region to be used for constructors and destructors.*/ +REGION_ALIAS("XTORS_FLASH", flash0); +REGION_ALIAS("XTORS_FLASH_LMA", flash0); + +/* Flash region to be used for code text.*/ +REGION_ALIAS("TEXT_FLASH", flash0); +REGION_ALIAS("TEXT_FLASH_LMA", flash0); + +/* Flash region to be used for read only data.*/ +REGION_ALIAS("RODATA_FLASH", flash0); +REGION_ALIAS("RODATA_FLASH_LMA", flash0); + +/* Flash region to be used for various.*/ +REGION_ALIAS("VARIOUS_FLASH", flash0); +REGION_ALIAS("VARIOUS_FLASH_LMA", flash0); + +/* Flash region to be used for RAM(n) initialization data.*/ +REGION_ALIAS("RAM_INIT_FLASH_LMA", flash0); + +/* RAM region to be used for Main stack. This stack accommodates the processing + of all exceptions and interrupts.*/ +REGION_ALIAS("MAIN_STACK_RAM", ram0); + +/* RAM region to be used for the process stack. This is the stack used by + the main() function.*/ +REGION_ALIAS("PROCESS_STACK_RAM", ram0); + +/* RAM region to be used for data segment.*/ +REGION_ALIAS("DATA_RAM", ram0); +REGION_ALIAS("DATA_RAM_LMA", flash0); + +/* RAM region to be used for BSS segment.*/ +REGION_ALIAS("BSS_RAM", ram0); + +/* RAM region to be used for the default heap.*/ +REGION_ALIAS("HEAP_RAM", ram0); + +/* Generic rules inclusion.*/ +INCLUDE rules.ld diff --git a/keyboards/matrix/abelx/matrix.c b/keyboards/matrix/abelx/matrix.c new file mode 100644 index 0000000000..56129bd0b5 --- /dev/null +++ b/keyboards/matrix/abelx/matrix.c @@ -0,0 +1,108 @@ +/** + * matrix.c + * + * Copyright 2020 astro + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include +#include +#include "quantum.h" +#include "matrix.h" +#include "tca6424.h" +#include "abelx.h" + +static const uint16_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; + +void matrix_init_custom(void) +{ + tca6424_init(); + // set port0 + tca6424_write_config(TCA6424_PORT0, 0); + // set port1 + tca6424_write_config(TCA6424_PORT1, 0); + // set port2 + tca6424_write_config(TCA6424_PORT2, 0xF5); + + // clear output + tca6424_write_port(TCA6424_PORT0, 0); + tca6424_write_port(TCA6424_PORT1, 0); + tca6424_write_port(TCA6424_PORT2, 0); +} + + +static uint8_t row_mask[] = {ROW1_MASK,ROW2_MASK,ROW3_MASK,ROW4_MASK,ROW5_MASK,ROW6_MASK}; +static uint8_t col_mask[] = {COL1_MASK, COL2_MASK, COL3_MASK, COL4_MASK, COL5_MASK, COL6_MASK, COL7_MASK, COL8_MASK, COL9_MASK, COL10_MASK, COL11_MASK, COL12_MASK, COL13_MASK, COL14_MASK, COL15_MASK, COL16_MASK}; + +bool matrix_scan_custom(matrix_row_t current_matrix[]) +{ + bool changed = false; + uint8_t p0_data = tca6424_read_port(TCA6424_PORT0); + + for (int col = 0; col < MATRIX_COLS; col++) { + // Select col and wait for col selecton to stabilize + switch(col) { + case 0: + set_pin(col_pins[col]); + break; + case 1 ... 8: + tca6424_write_port(TCA6424_PORT1, col_mask[col]); + break; + default: + tca6424_write_port(TCA6424_PORT0, col_mask[col]|(p0_data&0x01)); + break; + } + matrix_io_delay(); + + // read row port for all rows + uint8_t row_value = tca6424_read_port(ROW_PORT); + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + uint8_t tmp = row; + // Store last value of row prior to reading + matrix_row_t last_row_value = current_matrix[tmp]; + + // Check row pin state + if (row_value & row_mask[row]) { + // Pin HI, set col bit + current_matrix[tmp] |= (1 << col); + } else { + // Pin LOW, clear col bit + current_matrix[tmp] &= ~(1 << col); + } + + // Determine if the matrix changed state + if ((last_row_value != current_matrix[tmp]) && !(changed)) { + changed = true; + } + } + // Unselect col + switch(col) { + case 0: + clear_pin(col_pins[col]); + break; + case 8: + tca6424_write_port(TCA6424_PORT1, 0); + break; + case 15: + tca6424_write_port(TCA6424_PORT0, p0_data&0x01); + break; + default: + break; + } + } + + return changed; +} diff --git a/keyboards/matrix/abelx/mcuconf.h b/keyboards/matrix/abelx/mcuconf.h new file mode 100644 index 0000000000..e26b2823f9 --- /dev/null +++ b/keyboards/matrix/abelx/mcuconf.h @@ -0,0 +1,253 @@ +/* + ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +/* + * STM32F4xx drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + * DMA priorities: + * 0...3 Lowest...Highest. + */ + +#define STM32F4xx_MCUCONF + +/* + * HAL driver system settings. + */ +#define STM32_NO_INIT FALSE +#define STM32_HSI_ENABLED TRUE +#define STM32_LSI_ENABLED TRUE +#define STM32_HSE_ENABLED TRUE +#define STM32_LSE_ENABLED FALSE +#define STM32_CLOCK48_REQUIRED TRUE +#define STM32_SW STM32_SW_PLL +#define STM32_PLLSRC STM32_PLLSRC_HSE +#define STM32_PLLM_VALUE 8 +#define STM32_PLLN_VALUE 192 +#define STM32_PLLP_VALUE 2 +#define STM32_PLLQ_VALUE 4 +#define STM32_HPRE STM32_HPRE_DIV1 +#define STM32_PPRE1 STM32_PPRE1_DIV2 +#define STM32_PPRE2 STM32_PPRE2_DIV2 +#define STM32_RTCSEL STM32_RTCSEL_LSI +#define STM32_RTCPRE_VALUE 8 +#define STM32_MCO1SEL STM32_MCO1SEL_HSI +#define STM32_MCO1PRE STM32_MCO1PRE_DIV1 +#define STM32_MCO2SEL STM32_MCO2SEL_SYSCLK +#define STM32_MCO2PRE STM32_MCO2PRE_DIV5 +#define STM32_I2SSRC STM32_I2SSRC_CKIN +#define STM32_PLLI2SN_VALUE 192 +#define STM32_PLLI2SR_VALUE 5 +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_BKPRAM_ENABLE FALSE + +/* + * IRQ system settings. + */ +#define STM32_IRQ_EXTI0_PRIORITY 6 +#define STM32_IRQ_EXTI1_PRIORITY 6 +#define STM32_IRQ_EXTI2_PRIORITY 6 +#define STM32_IRQ_EXTI3_PRIORITY 6 +#define STM32_IRQ_EXTI4_PRIORITY 6 +#define STM32_IRQ_EXTI5_9_PRIORITY 6 +#define STM32_IRQ_EXTI10_15_PRIORITY 6 +#define STM32_IRQ_EXTI16_PRIORITY 6 +#define STM32_IRQ_EXTI17_PRIORITY 15 +#define STM32_IRQ_EXTI18_PRIORITY 6 +#define STM32_IRQ_EXTI19_PRIORITY 6 +#define STM32_IRQ_EXTI20_PRIORITY 6 +#define STM32_IRQ_EXTI21_PRIORITY 15 +#define STM32_IRQ_EXTI22_PRIORITY 15 + +/* + * ADC driver system settings. + */ +#define STM32_ADC_ADCPRE ADC_CCR_ADCPRE_DIV4 +#define STM32_ADC_USE_ADC1 FALSE +#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(2, 4) +#define STM32_ADC_ADC1_DMA_PRIORITY 2 +#define STM32_ADC_IRQ_PRIORITY 6 +#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define STM32_GPT_USE_TIM1 FALSE +#define STM32_GPT_USE_TIM2 FALSE +#define STM32_GPT_USE_TIM3 FALSE +#define STM32_GPT_USE_TIM4 TRUE +#define STM32_GPT_USE_TIM5 FALSE +#define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM11 FALSE +#define STM32_GPT_TIM1_IRQ_PRIORITY 7 +#define STM32_GPT_TIM2_IRQ_PRIORITY 7 +#define STM32_GPT_TIM3_IRQ_PRIORITY 7 +#define STM32_GPT_TIM4_IRQ_PRIORITY 7 +#define STM32_GPT_TIM5_IRQ_PRIORITY 7 +#define STM32_GPT_TIM9_IRQ_PRIORITY 7 +#define STM32_GPT_TIM11_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define STM32_I2C_USE_I2C1 TRUE +#define STM32_I2C_USE_I2C2 FALSE +#define STM32_I2C_USE_I2C3 FALSE +#define STM32_I2C_BUSY_TIMEOUT 50 +#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2) +#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2C_I2C1_IRQ_PRIORITY 5 +#define STM32_I2C_I2C2_IRQ_PRIORITY 5 +#define STM32_I2C_I2C3_IRQ_PRIORITY 5 +#define STM32_I2C_I2C1_DMA_PRIORITY 3 +#define STM32_I2C_I2C2_DMA_PRIORITY 3 +#define STM32_I2C_I2C3_DMA_PRIORITY 3 +#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure") + +/* + * I2S driver system settings. + */ +#define STM32_I2S_USE_SPI2 FALSE +#define STM32_I2S_USE_SPI3 FALSE +#define STM32_I2S_SPI2_IRQ_PRIORITY 10 +#define STM32_I2S_SPI3_IRQ_PRIORITY 10 +#define STM32_I2S_SPI2_DMA_PRIORITY 1 +#define STM32_I2S_SPI3_DMA_PRIORITY 1 +#define STM32_I2S_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_I2S_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_I2S_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_I2S_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_I2S_DMA_ERROR_HOOK(i2sp) osalSysHalt("DMA failure") + +/* + * ICU driver system settings. + */ +#define STM32_ICU_USE_TIM1 FALSE +#define STM32_ICU_USE_TIM2 FALSE +#define STM32_ICU_USE_TIM3 FALSE +#define STM32_ICU_USE_TIM4 FALSE +#define STM32_ICU_USE_TIM5 FALSE +#define STM32_ICU_USE_TIM9 FALSE +#define STM32_ICU_TIM1_IRQ_PRIORITY 7 +#define STM32_ICU_TIM2_IRQ_PRIORITY 7 +#define STM32_ICU_TIM3_IRQ_PRIORITY 7 +#define STM32_ICU_TIM4_IRQ_PRIORITY 7 +#define STM32_ICU_TIM5_IRQ_PRIORITY 7 +#define STM32_ICU_TIM9_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define STM32_PWM_USE_ADVANCED FALSE +#define STM32_PWM_USE_TIM1 FALSE +#define STM32_PWM_USE_TIM2 FALSE +#define STM32_PWM_USE_TIM3 FALSE +#define STM32_PWM_USE_TIM4 FALSE +#define STM32_PWM_USE_TIM5 FALSE +#define STM32_PWM_USE_TIM9 FALSE +#define STM32_PWM_TIM1_IRQ_PRIORITY 7 +#define STM32_PWM_TIM2_IRQ_PRIORITY 7 +#define STM32_PWM_TIM3_IRQ_PRIORITY 7 +#define STM32_PWM_TIM4_IRQ_PRIORITY 7 +#define STM32_PWM_TIM5_IRQ_PRIORITY 7 +#define STM32_PWM_TIM9_IRQ_PRIORITY 7 + +/* + * SERIAL driver system settings. + */ +#define STM32_SERIAL_USE_USART1 FALSE +#define STM32_SERIAL_USE_USART2 FALSE +#define STM32_SERIAL_USE_USART6 FALSE +#define STM32_SERIAL_USART1_PRIORITY 12 +#define STM32_SERIAL_USART2_PRIORITY 12 +#define STM32_SERIAL_USART6_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define STM32_SPI_USE_SPI1 FALSE +#define STM32_SPI_USE_SPI2 FALSE +#define STM32_SPI_USE_SPI3 FALSE +#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 0) +#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 3) +#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3) +#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4) +#define STM32_SPI_SPI3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 0) +#define STM32_SPI_SPI3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7) +#define STM32_SPI_SPI1_DMA_PRIORITY 1 +#define STM32_SPI_SPI2_DMA_PRIORITY 1 +#define STM32_SPI_SPI3_DMA_PRIORITY 1 +#define STM32_SPI_SPI1_IRQ_PRIORITY 10 +#define STM32_SPI_SPI2_IRQ_PRIORITY 10 +#define STM32_SPI_SPI3_IRQ_PRIORITY 10 +#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure") + +/* + * ST driver system settings. + */ +#define STM32_ST_IRQ_PRIORITY 8 +#define STM32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define STM32_UART_USE_USART1 TRUE +#define STM32_UART_USE_USART2 FALSE +#define STM32_UART_USE_USART6 FALSE +#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) +#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5) +#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) +#define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) +#define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) +#define STM32_UART_USART1_IRQ_PRIORITY 12 +#define STM32_UART_USART2_IRQ_PRIORITY 12 +#define STM32_UART_USART6_IRQ_PRIORITY 12 +#define STM32_UART_USART1_DMA_PRIORITY 0 +#define STM32_UART_USART2_DMA_PRIORITY 0 +#define STM32_UART_USART6_DMA_PRIORITY 0 +#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure") + +/* + * USB driver system settings. + */ +#define STM32_USB_USE_OTG1 TRUE +#define STM32_USB_OTG1_IRQ_PRIORITY 14 +#define STM32_USB_OTG1_RX_FIFO_SIZE 512 +#define STM32_USB_OTG_THREAD_PRIO LOWPRIO +#define STM32_USB_OTG_THREAD_STACK_SIZE 128 +#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 + +/* + * WDG driver system settings. + */ +#define STM32_WDG_USE_IWDG FALSE + +#endif /* MCUCONF_H */ diff --git a/keyboards/matrix/abelx/readme.md b/keyboards/matrix/abelx/readme.md new file mode 100644 index 0000000000..e02438a1a6 --- /dev/null +++ b/keyboards/matrix/abelx/readme.md @@ -0,0 +1,11 @@ +# Matrix ABELX keyboard + +* Keyboard Maintainer: [astro](https://github.com/yulei) +* Hardware Supported: Matrix ABELX keyboard +* Hardware Availability: + +Make example for this keyboard (after setting up your build environment): + + make matrix/abelx:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/matrix/abelx/rules.mk b/keyboards/matrix/abelx/rules.mk new file mode 100644 index 0000000000..bd8156dd67 --- /dev/null +++ b/keyboards/matrix/abelx/rules.mk @@ -0,0 +1,57 @@ +## chip/board settings +# - the next two should match the directories in +# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) +MCU_FAMILY = STM32 +MCU_SERIES = STM32F4xx + +# Linker script to use +# - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ +# or /ld/ +MCU_LDSCRIPT = abelx_boot + +# Startup code to use +# - it should exist in /os/common/startup/ARMCMx/compilers/GCC/mk/ +MCU_STARTUP = stm32f4xx + +# Board: it should exist either in /os/hal/boards/ +# or /boards +BOARD = abelx_bd + +# Cortex version +MCU = cortex-m4 + +# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 +ARMV = 7 + +USE_FPU = yes + +# Vector table for application +# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ +OPT_DEFS = + +# Options to pass to dfu-util when flashing +#DFU_ARGS = -d 0483:df11 -a 0 -s 0x08000000:leave +#DFU_SUFFIX_ARGS = -p DF11 -v 0483 + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output +NO_USB_STARTUP_CHECK = yes # Disable initialization only when usb is plugged in + +CUSTOM_MATRIX = lite +# project specific files +SRC += matrix.c tca6424.c aw9523b.c +QUANTUM_LIB_SRC += i2c_master.c diff --git a/keyboards/matrix/abelx/tca6424.c b/keyboards/matrix/abelx/tca6424.c new file mode 100644 index 0000000000..44dc7909d8 --- /dev/null +++ b/keyboards/matrix/abelx/tca6424.c @@ -0,0 +1,117 @@ +/** + * @file tca6424.c + * @author astro + * @brief driver for the tca6424 + * + * Copyright 2020 astro + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "tca6424.h" +#include "i2c_master.h" + +#define TCA6424_INPUT_PORT0 0x0 +#define TCA6424_INPUT_PORT1 0x01 +#define TCA6424_INPUT_PORT2 0x02 + +#define TCA6424_OUTPUT_PORT0 0x04 +#define TCA6424_OUTPUT_PORT1 0x05 +#define TCA6424_OUTPUT_PORT2 0x06 + +#define TCA6424_POLARITY_PORT0 0x08 +#define TCA6424_POLARITY_PORT1 0x09 +#define TCA6424_POLARITY_PORT2 0x0A + +#define TCA6424_CONF_PORT0 0x0C +#define TCA6424_CONF_PORT1 0x0D +#define TCA6424_CONF_PORT2 0x0E + +#define TIMEOUT 100 + +void tca6424_init(void) +{ + i2c_init(); +} + +static void write_port(uint8_t p, uint8_t d) +{ + i2c_writeReg(TCA6424_ADDR, p, &d, 1, TIMEOUT); +} + +static uint8_t read_port(uint8_t port) +{ + uint8_t data = 0; + i2c_readReg(TCA6424_ADDR, port, &data, 1, TIMEOUT); + return data; +} + +void tca6424_write_config(TCA6424_PORT port, uint8_t data) +{ + switch(port) { + case TCA6424_PORT0: + write_port(TCA6424_CONF_PORT0, data); + break; + case TCA6424_PORT1: + write_port(TCA6424_CONF_PORT1, data); + break; + case TCA6424_PORT2: + write_port(TCA6424_CONF_PORT2, data); + break; + } +} + +void tca6424_write_polarity(TCA6424_PORT port, uint8_t data) +{ + switch(port) { + case TCA6424_PORT0: + write_port(TCA6424_POLARITY_PORT0, data); + break; + case TCA6424_PORT1: + write_port(TCA6424_POLARITY_PORT1, data); + break; + case TCA6424_PORT2: + write_port(TCA6424_POLARITY_PORT2, data); + break; + } +} + +void tca6424_write_port(TCA6424_PORT port, uint8_t data) +{ + switch(port) { + case TCA6424_PORT0: + write_port(TCA6424_OUTPUT_PORT0, data); + break; + case TCA6424_PORT1: + write_port(TCA6424_OUTPUT_PORT1, data); + break; + case TCA6424_PORT2: + write_port(TCA6424_OUTPUT_PORT2, data); + break; + } +} + +uint8_t tca6424_read_port(TCA6424_PORT port) +{ + switch(port) { + case TCA6424_PORT0: + return read_port(TCA6424_INPUT_PORT0); + case TCA6424_PORT1: + return read_port(TCA6424_INPUT_PORT1); + case TCA6424_PORT2: + return read_port(TCA6424_INPUT_PORT2); + } + + return 0; +} diff --git a/keyboards/matrix/abelx/tca6424.h b/keyboards/matrix/abelx/tca6424.h new file mode 100644 index 0000000000..519c6370ee --- /dev/null +++ b/keyboards/matrix/abelx/tca6424.h @@ -0,0 +1,42 @@ +/** + * @file tca6424.h + * @author astro + * @brief driver for the tca6424 + * + * Copyright 2020 astro + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include + +#ifndef TCA6424_ADDR + #define TCA6424_ADDR 0x44 +#endif + +typedef enum { + TCA6424_PORT0 = 0, + TCA6424_PORT1, + TCA6424_PORT2, +} TCA6424_PORT; + +void tca6424_init(void); + +void tca6424_write_config(TCA6424_PORT port, uint8_t data); +void tca6424_write_polarity(TCA6424_PORT port, uint8_t data); + +void tca6424_write_port(TCA6424_PORT port, uint8_t data); +uint8_t tca6424_read_port(TCA6424_PORT port); From cc5a38e7873ee184394b577b12b3b4578611b772 Mon Sep 17 00:00:00 2001 From: Ryan Date: Fri, 5 Nov 2021 14:42:08 +1100 Subject: [PATCH 429/595] Rework ISP flashing guide (#14938) Co-authored-by: Sergey Vlasov Co-authored-by: Dasky <32983009+daskygit@users.noreply.github.com> --- docs/isp_flashing_guide.md | 341 +++++++++++++++++-------------------- 1 file changed, 160 insertions(+), 181 deletions(-) diff --git a/docs/isp_flashing_guide.md b/docs/isp_flashing_guide.md index 7efcd9ee35..384aaf7229 100644 --- a/docs/isp_flashing_guide.md +++ b/docs/isp_flashing_guide.md @@ -1,263 +1,242 @@ # ISP Flashing Guide -ISP flashing (also known as ICSP flashing) is the process of programming a microcontroller directly. This allows you to replace the bootloader, or change the "fuses" on the controller, which control a number of hardware- and software-related functions, such as the speed of the controller, how it boots, and other options. +In order to flash a microcontroller over USB, it needs something called a bootloader. This bootloader lives in a specific section of the flash memory, and allows you to load the actual application firmware (in this case, QMK) into the rest of the flash. -The main use of ISP flashing for QMK is flashing or replacing the bootloader on your AVR-based controller (Pro Micros, or V-USB chips). +However, it can sometimes happen that the bootloader becomes corrupted and needs reflashing, or you may want to change the bootloader to another one. It's not possible to do this with the existing bootloader, because, of course, it is already running, and cannot overwrite itself. Instead, you will need to ISP flash the microcontroller. -?> This is only for programming AVR based boards, such as the Pro Micro or other ATmega controllers. It is not for Arm controllers, such as the Proton C. +There are several different kinds of bootloaders available for AVR microcontrollers. Most STM32 ARM-based microcontrollers already have a USB-capable bootloader in ROM, so generally do not need to be ISP flashed. -## Dealing with Corrupted Bootloaders +## Hardware -If you're having trouble flashing/erasing your board, and running into cryptic error messages like any of the following for a DFU based controller: +One of the following devices is required to perform the ISP flashing. The product links are to the official versions, however you can certainly source them elsewhere. - libusb: warning [darwin_transfer_status] transfer error: timed out - dfu.c:844: -ETIMEDOUT: Transfer timed out, NAK 0xffffffc4 (-60) - atmel.c:1627: atmel_flash: flash data dfu_download failed. - atmel.c:1629: Expected message length of 1072, got -60. - atmel.c:1434: Error flashing the block: err -2. - ERROR - Memory write error, use debug for more info. - commands.c:360: Error writing memory data. (err -4) +You'll also need some jumper wires to connect the ISP flasher and the target board. Some boards have an ISP header with the necessary pins broken out. If not, then you will need to temporarily solder the wires to the PCB -- usually to switch pins or directly to the MCU. +The wiring is fairly straightforward; for the most part, you'll be connecting like to like. Refer to the target MCU's datasheet for the exact `RESET`, `SCLK`, `MOSI` and `MISO` pins. - dfu.c:844: -EPIPE: a) Babble detect or b) Endpoint stalled 0xffffffe0 (-32) - Device is write protected. - dfu.c:252: dfu_clear_status( 0x7fff4fc2ea80 ) - atmel.c:1434: Error flashing the block: err -2. - ERROR - Memory write error, use debug for more info. - commands.c:360: Error writing memory data. (err -4) +### Pro Micro as ISP -Or, if you see this sort of message for a Pro Micro based controller: +[SparkFun Pro Micro](https://www.sparkfun.com/products/12640) - avrdude: butterfly_recv(): programmer is not responding - avrdude: butterfly_recv(): programmer is not responding - avrdude: verification error, first mismatch at byte 0x002a - 0x2b != 0x75 - avrdude: verification error; content mismatch - avrdude: verification error; content mismatch +To use a 5V/16MHz Pro Micro as an ISP flashing tool, you will first need to load a [special firmware](https://github.com/qmk/qmk_firmware/blob/master/util/pro_micro_ISP_B6_10.hex) onto it that emulates a hardware ISP flasher. +**AVRDUDE Programmer**: `avrisp` +**AVRDUDE Port**: Serial -You're likely going to need to ISP flash your board/device to get it working again. +#### Wiring -## Hardware Needed +|Pro Micro |Keyboard| +|-----------|--------| +|`VCC` |`VCC` | +|`GND` |`GND` | +|`10` (`B6`)|`RESET` | +|`15` (`B1`)|`SCLK` | +|`16` (`B2`)|`MOSI` | +|`14` (`B3`)|`MISO` | -You'll need one of the following to actually perform the ISP flashing (followed by the protocol they use): +!> Note that the `10` pin on the Pro Micro should be wired to the `RESET` pin on the keyboard's controller. ***DO NOT*** connect the `RESET` pin on the Pro Micro to the `RESET` on the keyboard. -* [SparkFun PocketAVR](https://www.sparkfun.com/products/9825) - (USB Tiny) -* [USBtinyISP AVR Programmer Kit](https://www.adafruit.com/product/46) - (USB Tiny) -* [USBasp](https://www.fischl.de/usbasp/) - (usbasp) -* [Teensy 2.0](https://www.pjrc.com/store/teensy.html) - (avrisp) -* [Pro Micro](https://www.sparkfun.com/products/12640) - (avrisp) -* [Bus Pirate](https://www.adafruit.com/product/237) - (buspirate) +### Teensy 2.0 as ISP -There are other devices that can be used to ISP flash, but these are the main ones. Also, all product links are to the official versions. You can source them elsewhere. +[PJRC Teensy 2.0](https://www.pjrc.com/store/teensy.html) -You'll also need something to wire your "ISP Programmer" to the device that you're programming. Some PCBs may have ISP headers that you can use directly, but this often isn't the case, so you'll likely need to solder to the controller itself or to different switches or other components. +To use a Teensy 2.0 as an ISP flashing tool, you will first need to load a [special firmware](https://github.com/qmk/qmk_firmware/blob/master/util/teensy_2.0_ISP_B0.hex) onto it that emulates a hardware ISP flasher. -### The ISP Firmware +**AVRDUDE Programmer**: `avrisp` +**AVRDUDE Port**: Serial -The Teensy and Pro Micro controllers will need you to flash the ISP firmware to the controllers before you can use them as an ISP programmer. The rest of the hardware should come preprogrammed. So, for these controllers, download the correct hex file, and flash it first. +#### Wiring -* Teensy 2.0: [`util/teensy_2.0_ISP_B0.hex`](https://github.com/qmk/qmk_firmware/blob/master/util/teensy_2.0_ISP_B0.hex) (`B0`) -* Pro Micro: [`util/pro_micro_ISP_B6_10.hex`](https://github.com/qmk/qmk_firmware/blob/master/util/pro_micro_ISP_B6_10.hex) (`10/B6`) +|Teensy|Keyboard| +|------|--------| +|`VCC` |`VCC` | +|`GND` |`GND` | +|`B0` |`RESET` | +|`B1` |`SCLK` | +|`B2` |`MOSI` | +|`B3` |`MISO` | -Once you've flashed your controller, you won't need this hex file anymore. +!> Note that the `B0` pin on the Teensy should be wired to the `RESET` pin on the keyboard's controller. ***DO NOT*** connect the `RESET` pin on the Teensy to the `RESET` on the keyboard. -## Software Needed +### SparkFun PocketAVR / USBtinyISP / USBasp -The QMK Toolbox can be used for most (all) of this. +[SparkFun PocketAVR](https://www.sparkfun.com/products/9825) +[Adafruit USBtinyISP](https://www.adafruit.com/product/46) +[Thomas Fischl's USBasp](https://www.fischl.de/usbasp/) -However, you can grab the [Teensy Loader](https://www.pjrc.com/teensy/loader.html) to flash your Teensy 2.0 board, if you are using that. Or you can use `avrdude` (installed as part of `qmk_install.sh`), or [AVRDUDESS](https://blog.zakkemble.net/avrdudess-a-gui-for-avrdude/) (for Windows) to flash the Pro Micro, and the ISP flashing. +**AVRDUDE Programmer**: `usbtiny` / `usbasp` +**AVRDUDE Port**: `usb` +#### Wiring -## Wiring +|ISP |Keyboard| +|---------|--------| +|`VCC` |`VCC` | +|`GND` |`GND` | +|`RST` |`RESET` | +|`SCLK` |`SCLK` | +|`MOSI` |`MOSI` | +|`MISO` |`MISO` | -This is pretty straight-forward - we'll be connecting like-things to like-things in the following manner. -### SparkFun Pocket AVR +### Bus Pirate - PocketAVR RST <-> Keyboard RESET - PocketAVR SCLK <-> Keyboard B1 (SCLK) - PocketAVR MOSI <-> Keyboard B2 (MOSI) - PocketAVR MISO <-> Keyboard B3 (MISO) - PocketAVR VCC <-> Keyboard VCC - PocketAVR GND <-> Keyboard GND +[Adafruit Bus Pirate](https://www.adafruit.com/product/237) -### USBasp +!> The 5-pin "ICSP" header is for ISP flashing the PIC microcontroller of the Bus Pirate. Connect your target board to the 10-pin header opposite the USB connector instead. - USBasp RST <-> Keyboard RESET - USBasp SCLK <-> Keyboard B1 (SCLK) - USBasp MOSI <-> Keyboard B2 (MOSI) - USBasp MISO <-> Keyboard B3 (MISO) - USBasp VCC <-> Keyboard VCC - USBasp GND <-> Keyboard GND +**AVRDUDE Programmer**: `buspirate` +**AVRDUDE Port**: Serial -### Teensy 2.0 +#### Wiring - Teensy B0 <-> Keyboard RESET - Teensy B1 <-> Keyboard B1 (SCLK) - Teensy B2 <-> Keyboard B2 (MOSI) - Teensy B3 <-> Keyboard B3 (MISO) - Teensy VCC <-> Keyboard VCC - Teensy GND <-> Keyboard GND - -!> Note that the B0 pin on the Teensy is wired to the RESET/RST pin on the keyboard's controller. ***DO NOT*** wire the RESET pin on the Teensy to the RESET on the keyboard. - -### Pro Micro - - Pro Micro 10 (B6) <-> Keyboard RESET - Pro Micro 15 (B1) <-> Keyboard B1 (SCLK) - Pro Micro 16 (B2) <-> Keyboard B2 (MOSI) - Pro Micro 14 (B3) <-> Keyboard B3 (MISO) - Pro Micro VCC <-> Keyboard VCC - Pro Micro GND <-> Keyboard GND - -!> Note that the 10/B6 pin on the Pro Micro is wired to the RESET/RST pin on the keyboard's controller. ***DO NOT*** wire the RESET pin on the Pro Micro to the RESET on the keyboard. - - -## Flashing Your Keyboard - -After you have your ISP programmer set up, and wired to your keyboard, it's time to flash your keyboard. - -### The Bootloader File - -The simplest and quickest way to get things back to normal is to flash only a bootloader to the keyboard. Once this is done, you can connect the keyboard normally and flash the keyboard like you normally would. - -You can find the stock bootloaders in the [`util/` folder](https://github.com/qmk/qmk_firmware/tree/master/util). Be sure to flash the correct bootloader for your chip: - -* **Atmel DFU** - * [ATmega16U4](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_atmega16u4_1.0.1.hex) - * [ATmega32U4](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_atmega32u4_1.0.0.hex) - * [AT90USB64](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_at90usb64_1.0.0.hex) - * [AT90USB128](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_at90usb128_1.0.1.hex) -* **Caterina** - * [Pro Micro (5V/16MHz)](https://github.com/sparkfun/Arduino_Boards/blob/master/sparkfun/avr/bootloaders/caterina/Caterina-promicro16.hex) - * [Pro Micro (3.3V/8MHz)](https://github.com/sparkfun/Arduino_Boards/blob/master/sparkfun/avr/bootloaders/caterina/Caterina-promicro8.hex) -* **BootloadHID (PS2AVRGB)** - * [ATmega32A](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_ps2avrgb_bootloadhid_1.0.1.hex) - -If you're not sure what your board uses, look in the `rules.mk` file for the keyboard in QMK. The `MCU` and `BOOTLOADER` lines will have the value you need. It may differ between different versions of the board. - -### Production Techniques - -If you'd like to flash both the bootloader **and** the regular firmware at the same time, there are two options to do so. Manually, or with the `:production` target when compiling. - -To do this manually: - -1. Open the original firmware .hex file in a text editor -2. Remove the last line (which should be `:00000001FF` - this is an EOF message) -3. Copy the entire bootloader's contents onto a new line (with no empty lines between) and paste it at the end of the original file -4. Save it as a new file by naming it `__production.hex` +|Bus Pirate|Keyboard| +|----------|--------| +|`+5V` |`VCC` | +|`GND` |`GND` | +|`RST` |`RESET` | +|`CLK` |`SCLK` | +|`MOSI` |`MOSI` | +|`MISO` |`MISO` | -?> It's possible to use other bootloaders here in the same way, but __you need a bootloader__, otherwise you'll have to use ISP again to write new firmware to your keyboard. +## Software -#### Create QMK DFU Bootloader and Production images +[QMK Toolbox](https://github.com/qmk/qmk_toolbox/releases) supports flashing both the ISP firmware and bootloader, but note that it cannot (currently) set the AVR fuse bytes for the actual ISP flashing step, so you may want to work with `avrdude` directly instead. -You can create the firmware, the QMK DFU Bootloader and the production firmware images for the board using the `:production` target when compiling. Once this is done, you'll see three files: -* `_.hex` -* `__bootloader.hex` -* `__production.hex` +Setting up the [QMK environment](newbs.md) is highly recommended, as it automatically installs `avrdude` along with a host of other tools. -The QMK DFU bootloader has only really been tested on `atmega32u4` controllers (such as the AVR based Planck boards, and the Pro Micro), and hasn't been tested on other controllers. However, it will definitely not work on V-USB controllers, such as the `atmega32a` or `atmega328p`. +## Bootloader Firmware -You can flash either the bootloader or the production firmware file. The production firmware file will take a lot longer to flash, since it's flashing a lot more data. +One of these files is what you will be ISP flashing onto the board. The default fuses are also listed. -?> Note: You should stay with the same bootloader. If you're using DFU already, switching to QMK DFU is fine. But flashing QMK DFU onto a Pro Micro, for instance, has additional steps needed. +If you're not sure what your board uses, look in the `rules.mk` file for the keyboard in QMK. The `MCU` and `BOOTLOADER` lines will have the values you need. It may differ between different versions of the board. -## Flashing Your Bootloader/Production File +### Atmel DFU -Make sure your keyboard is unplugged from any device, and plug in your ISP Programmer. +These are the [factory default bootloaders](https://www.microchip.com/content/dam/mchp/documents/OTH/ProductDocuments/SoftwareLibraries/Firmware/megaUSB_DFU_Bootloaders.zip) shipped by Atmel (now Microchip). Note that the AT90USB64 and AT90USB128 bootloaders are [slightly modified](https://github.com/qmk/qmk_firmware/pull/14064), due to a bug causing them to not enumerate properly in Windows 8 and later. -If you want to change bootloader types, You'll need to use the command line. +|MCU |Low |High |Extended|USB ID | +|--------------------------------------------------------------------------------------------------|------|-------------------------------|--------|-----------| +|[ATmega16U4](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_atmega16u4_1.0.1.hex)|`0x5E`|`0x99` / `0xD9` (JTAG disabled)|`0xF3` |`03EB:2FF3`| +|[ATmega32U4](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_atmega32u4_1.0.0.hex)|`0x5E`|`0x99` / `0xD9` (JTAG disabled)|`0xF3` |`03EB:2FF4`| +|[AT90USB64](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_at90usb64_1.0.0.hex) |`0x5E`|`0x9B` / `0xDB` (JTAG disabled)|`0xF3` |`03EB:2FF9`| +|[AT90USB128](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_at90usb128_1.0.1.hex)|`0x5E`|`0x99` / `0xD9` (JTAG disabled)|`0xF3` |`03EB:2FFB`| -### QMK Toolbox +### Caterina -1. `AVRISP device connected` or `USB Tiny device connected` will show up in yellow -2. Select the correct bootloader/production .hex file with the `Open` dialog (spaces can't be in the path) -3. Be sure the correct `Microcontroller` option for the keyboard you're flashing (not the ISP programmer) is selected -4. Hit `Flash` -5. Wait, as nothing will output for a while, especially with production files +This is the default Arduino-style bootloader derived from the [LUFA CDC bootloader](https://github.com/abcminiuser/lufa/tree/master/Bootloaders/CDC), and is only for the ATmega32U4. -If the verification and fuse checks are ok, you're done! Your board may restart automatically, otherwise, unplug your Teensy and plug in your keyboard - you can leave your Teensy wired to your keyboard while testing things, but it's recommended that you desolder it/remove the wiring once you're sure everything works. +There are several variants depending on the vendor, but they all mostly work the same way. The SparkFun variants, for example, require the `RESET` pin to be [grounded twice quickly](https://learn.sparkfun.com/tutorials/pro-micro--fio-v3-hookup-guide#ts-reset) in order to stay in bootloader mode for more than 750 ms. -### Command Line +|MCU |Low |High |Extended|USB ID | +|-----------------------------------------------------------------------------------------------------------------------------------------------------------------|------|------|--------|-----------| +|[SparkFun Pro Micro (3V3/8MHz)](https://github.com/sparkfun/Arduino_Boards/blob/master/sparkfun/avr/bootloaders/caterina/Caterina-promicro8.hex) |`0xFF`|`0xD8`|`0xFE` |`1B4F:9203`| +|[SparkFun Pro Micro (5V/16MHz)](https://github.com/sparkfun/Arduino_Boards/blob/master/sparkfun/avr/bootloaders/caterina/Caterina-promicro16.hex) |`0xFF`|`0xD8`|`0xFB` |`1B4F:9205`| +|[SparkFun LilyPadUSB (and some Pro Micro clones)](https://github.com/sparkfun/Arduino_Boards/blob/main/sparkfun/avr/bootloaders/caterina/Caterina-lilypadusb.hex)|`0xFF`|`0xD8`|`0xFE` |`1B4F:9207`| +|[Pololu A-Star 32U4](https://github.com/pololu/a-star/blob/master/bootloaders/caterina/Caterina-A-Star.hex)* |`0xFF`|`0xD0`|`0xF8` |`1FFB:0101`| +|[Adafruit Feather 32U4](https://github.com/adafruit/Caterina-Bootloader/blob/master/Built%20Firmwares/Caterina-Feather32u4.hex) |`0xFF`|`0xD8`|`0xFB` |`239A:000C`| +|[Adafruit ItsyBitsy 32U4 (3V3/8MHz)](https://github.com/adafruit/Caterina-Bootloader/blob/master/Caterina_itsybitsy3V.hex)* |`0xFF`|`0xD8`|`0xFB` |`239A:000D`| +|[Adafruit ItsyBitsy 32U4 (5V/16MHz)](https://github.com/adafruit/Caterina-Bootloader/blob/master/Caterina_itsybitsy5V.hex) |`0xFF`|`0xD8`|`0xFB` |`239A:000E`| +|[Arduino Leonardo](https://github.com/arduino/ArduinoCore-avr/blob/master/bootloaders/caterina/Caterina-Leonardo.hex)* |`0xFF`|`0xD8`|`0xFB` |`2341:0036`| +|[Arduino Micro](https://github.com/arduino/ArduinoCore-avr/blob/master/bootloaders/caterina/Caterina-Micro.hex)* |`0xFF`|`0xD8`|`0xFB` |`2341:0037`| -Open a terminal (`cmd` on Windows, for instance) and navigate to your where your modified .hex file is. We'll pretend this file is called `main.hex`, and that your Teensy 2.0 is on the `COM3` port - if you're unsure, you can open your Device Manager, and look for `Ports > USB Serial Device`. Use that COM port here. You can confirm it's the right port with: +?> Files marked with a * have combined Arduino sketches, which runs by default and also appears as a serial port. However, this is *not* the bootloader device. - avrdude -c avrisp -P COM3 -p atmega32u4 +### BootloadHID (PS2AVRGB) -and you should get something like the following output: +This bootloader is primarily for keyboards originally designed for the PS2AVRGB firmware and Bootmapper Client. It is not recommended for use in new designs. - avrdude: AVR device initialized and ready to accept instructions +|MCU |Low |High |USB ID | +|-----------------------------------------------------------------------------------------------------------|------|------|-----------| +|[ATmega32A](https://github.com/qmk/qmk_firmware/blob/master/util/bootloader_ps2avrgb_bootloadhid_1.0.1.hex)|`0x0F`|`0xD0`|`16C0:05DF`| - Reading | ################################################## | 100% 0.02s +### USBaspLoader - avrdude: Device signature = 0x1e9587 +USBaspLoader is a bootloader based on V-USB that emulates a hardware USBasp device. It runs on ATmega32A and ATmega328P MCUs. - avrdude: safemode: Fuses OK +Precompiled `.hex` files are generally not available, but you can compile it yourself by setting up the QMK environment and following Coseyfannitutti's guide for the appropriate MCU: - avrdude done. Thank you. +|MCU |Low |High |Extended|USB ID | +|-------------------------------------------------------------------------------------|------|------|--------|-----------| +|[ATmega32A](https://github.com/coseyfannitutti/discipline/tree/master/doc/bootloader)|`0x1F`|`0xC0`|*n/a* |`16C0:05DC`| +|[ATmega328P](https://github.com/coseyfannitutti/discipad/tree/master/doc/bootloader) |`0xD7`|`0xD0`|`0x04` |`16C0:05DC`| -Since our keyboard uses an `atmega32u4` (common), that is the chip we'll specify. This is the full command: +Note that some boards may have their own specialized build of this bootloader in a separate repository. This will usually be linked to in the board's readme. - avrdude -c avrisp -P COM3 -p atmega32u4 -U flash:w:main.hex:i +## Flashing the Bootloader -If your board uses an `atmega32a` (e.g. on a jj40), the command is this (the extra code at the end sets the fuses correctly): +Open a new Terminal window - if you are on Windows, use MSYS2 or QMK MSYS, not the Command Prompt. Navigate to the directory your bootloader `.hex` is in. Now it's time to run the `avrdude` command. - avrdude -c avrisp -P COM3 -p atmega32 -U flash:w:main.hex:i -U hfuse:w:0xD0:m -U lfuse:w:0x0F:m +The syntax of `avrdude` is: -You should see a couple of progress bars, then you should see: +``` +avrdude -c -P -p -U flash:w::i +``` - avrdude: verifying ... - avrdude: 32768 bytes of flash verified + * `` corresponds to the programmer type listed for each ISP flasher in the [Hardware](#hardware) section, for example `avrisp`. + * `` is the serial port that appears when you plug the ISP flasher in, if any. For some programmers this is simply `usb` (or you can omit the `-P` argument completely) since they do not operate as a serial device. + * Windows: `COMx` - check Device Manager, under the "Ports (COM & LPT)" section + * Linux: `/dev/ttyACMx` + * macOS: `/dev/tty.usbmodemXXXXXX` + * `` should be the lowercase name of the target AVR microcontroller, for example `atmega32u4`. + * `` is the absolute or relative path to the bootloader to be flashed, for example `Caterina-Micro.hex`. - avrdude: safemode: Fuses OK +You can also run `man avrdude` for more information. - avrdude done. Thank you. +If all goes well, you should get output similar to the following: -Which means everything should be ok! Your board may restart automatically, otherwise, unplug your Teensy and plug in your keyboard - you can leave your Teensy wired to your keyboard while testing things, but it's recommended that you desolder it/remove the wiring once you're sure everything works. +``` +avrdude: AVR device initialized and ready to accept instructions -If you're using a SparkFun PocketAVR Programmer, or another USB Tiny based ISP programmer, you will want to use something like this: +Reading | ################################################## | 100% 0.00s - avrdude -c usbtiny -P usb -p atmega32u4 +avrdude: Device signature = 0x1e9587 (probably m32u4) +avrdude: NOTE: "flash" memory has been specified, an erase cycle will be performed + To disable this feature, specify the -D option. +avrdude: erasing chip +avrdude: reading input file "Caterina-Micro.hex" +avrdude: writing flash (32730 bytes): -#### Advanced: Changing Fuses +Writing | ################################################## | 100% 11.58s -If you're switching bootloaders, such as flashing QMK DFU on a Pro Micro, you will need to change the fuses, in additional to flashing the bootloader hex file. This is because `caterina` (the Pro Micro bootloader) and `dfu` handle the startup routines differently, and that behavior is controlled by the fuses. +avrdude: 32730 bytes of flash written +avrdude: verifying flash memory against Caterina-Micro.hex: +avrdude: load data flash data from input file Caterina-Micro.hex: +avrdude: input file Caterina-Micro.hex contains 32730 bytes +avrdude: reading on-chip flash data: -!> This is one area that it is very important to be careful, as changing fuses is one of the ways that you can permanently brick your controller. +Reading | ################################################## | 100% 10.33s -For this, we are assuming the 5V 16MHz versions of the `atmega32u4` (such as the 5V Pro Micro). +avrdude: verifying ... +avrdude: 32730 bytes of flash verified -For DFU on the `atmega32u4`, these are the fuse settings that you want: +avrdude: safemode: Fuses OK (E:CB, H:D8, L:FF) -| Fuse | Setting | -|----------|------------------| -| Low | `0x5E` | -| High | `0xD9` or `0x99` | -| Extended | `0xC3` | +avrdude done. Thank you. +``` -The High fuse can be 0xD9 or 0x99. The difference is that 0xD9 disables JTAG, which QMK Firmware disables via software as well, while 0x99 doesn't disable JTAG. +### Setting the Fuses -To set this add `-U lfuse:w:0x5E:m -U hfuse:w:0xD9:m -U efuse:w:0xC3:m` to your command. So the final command should look something like: +This is a slightly more advanced topic, but may be necessary if you are switching from one bootloader to another (for example, Caterina to Atmel/QMK DFU on a Pro Micro). Fuses control some of the low-level functionality of the AVR microcontroller, such as clock speed, whether JTAG is enabled, and the size of the section of flash memory reserved for the bootloader, among other things. You can find a fuse calculator for many AVR parts [here](https://www.engbedded.com/conffuse/). - avrdude -c avrisp -P COM3 -p atmega32u4 -U flash:w:main.hex:i -U lfuse:w:0x5E:m -U hfuse:w:0xD9:m -U efuse:w:0xC3:m +!> **WARNING:** Setting incorrect fuse values, in particular the clock-related bits, may render the MCU practically unrecoverable without high voltage programming (not covered here)! Make sure to double check the commands you enter before you execute them. -For Caterina on the `atmega32u4`, these are the fuse settings that you want: +To set the fuses, add the following to the `avrdude` command: -| Fuse | Setting| -|----------|--------| -| Low | `0xFF` | -| High | `0xD8` | -| Extended | `0xCB` | +``` +-U lfuse:w:0xXX:m -U hfuse:w:0xXX:m -U efuse:w:0xXX:m +``` -To set this add `-U lfuse:w:0xFF:m -U hfuse:w:0xD8:m -U efuse:w:0xCB:m` to your command. So the final command should look something like: +where the `lfuse`, `hfuse` and `efuse` arguments represent the low, high and extended fuse bytes as listed in the [Hardware](#hardware) section. - avrdude -c avrisp -P COM3 -p atmega32u4 -U flash:w:main.hex:i -U lfuse:w:0xFF:m -U hfuse:w:0xD8:m -U efuse:w:0xCB:m +?> You may get a warning from `avrdude` that the extended fuse byte does not match what you provided when reading it back. If the second hex digit matches, this can usually be safely ignored, because the top four bits of this fuse do not actually exist on many AVR parts, and may read back as anything. +## Creating a "Production" Firmware -If you are using a different controller or want different configuration, you can use [this AVR Fuse Calculator](https://www.engbedded.com/fusecalc/) to find a better value for you. +For mass production purposes, it is possible to join the bootloader and QMK firmware together into a single file, due to the way the [Intel Hex format](https://en.wikipedia.org/wiki/Intel_HEX) works: -## Help + 1. Open the QMK firmware and bootloader `.hex` files in a text editor. + 2. Remove the last line of the QMK firmware (which should be `:00000001FF` - this is just an "end of file" marker). + 3. Paste the contents of the bootloader `.hex` file onto a new line at the end of the QMK firmware file, with no empty lines between. + 4. Save it as a new file, for example `__production.hex`. -If you have any questions/problems, feel free to [open an issue](https://github.com/qmk/qmk_firmware/issues/new)! +You can then ISP flash this combined firmware instead, which allows you to skip the extra step of flashing the QMK firmware over USB. From a63c2c5f509e98dc58ea876f525896aa717a0d6e Mon Sep 17 00:00:00 2001 From: Albert Y <76888457+filterpaper@users.noreply.github.com> Date: Fri, 5 Nov 2021 16:11:45 +0800 Subject: [PATCH 430/595] Add example for turning off RGB colors and retaining indicator function (#14997) * Add init function for solid effect with colors off * Restructure sentence Co-authored-by: filterpaper --- docs/feature_rgb_matrix.md | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md index 2dbd32fbdb..fe72d063e4 100644 --- a/docs/feature_rgb_matrix.md +++ b/docs/feature_rgb_matrix.md @@ -780,3 +780,13 @@ void rgb_matrix_indicators_advanced_user(uint8_t led_min, uint8_t led_max) { } } ``` + +#### Indicators without RGB Matrix Effect + +If you want to just use RGB indicators without RGB matrix effect, it is not possible to disable the latter because toggling RGB off will disable everything. You can workaround it with solid effect and colors off using this init function: +```c +void keyboard_post_init_user(void) { + rgb_matrix_mode_noeeprom(RGB_MATRIX_SOLID_COLOR); + rgb_matrix_sethsv_noeeprom(HSV_OFF); +} +``` From 8f2ffea656c3abcfd0150bb67fa01e5d4cbafd14 Mon Sep 17 00:00:00 2001 From: devilzmods <61511785+devilzmods@users.noreply.github.com> Date: Fri, 5 Nov 2021 09:56:38 +0100 Subject: [PATCH 431/595] My Personal Keymaps for the Planck and melody96 (#12672) * my planck keymap * my planck keymap * minor changes * Added personalized, VIA compatible keymap to the Melody96 * lighting layers added and keymap tweaked * added basic descriptions * added basic descriptions * added basic descriptions * added basic descriptions * hopefully removed personal change to .gitignore * restored .gitignore from my master * restored .gitignore from my master * requested changes and minor functionality tweaks * Apply suggestions from code review Co-authored-by: Ryan Co-authored-by: Nick Brassel Co-authored-by: Ryan --- keyboards/melody96/keymaps/dvz/config.h | 34 +++ keyboards/melody96/keymaps/dvz/keymap.c | 161 +++++++++++++ keyboards/melody96/keymaps/dvz/readme.md | 3 + keyboards/melody96/keymaps/dvz/rules.mk | 5 + keyboards/planck/keymaps/dvz/config.h | 73 ++++++ keyboards/planck/keymaps/dvz/keymap.c | 280 +++++++++++++++++++++++ keyboards/planck/keymaps/dvz/readme.md | 11 + keyboards/planck/keymaps/dvz/rules.mk | 5 + 8 files changed, 572 insertions(+) create mode 100644 keyboards/melody96/keymaps/dvz/config.h create mode 100644 keyboards/melody96/keymaps/dvz/keymap.c create mode 100644 keyboards/melody96/keymaps/dvz/readme.md create mode 100644 keyboards/melody96/keymaps/dvz/rules.mk create mode 100644 keyboards/planck/keymaps/dvz/config.h create mode 100644 keyboards/planck/keymaps/dvz/keymap.c create mode 100644 keyboards/planck/keymaps/dvz/readme.md create mode 100644 keyboards/planck/keymaps/dvz/rules.mk diff --git a/keyboards/melody96/keymaps/dvz/config.h b/keyboards/melody96/keymaps/dvz/config.h new file mode 100644 index 0000000000..be786464bc --- /dev/null +++ b/keyboards/melody96/keymaps/dvz/config.h @@ -0,0 +1,34 @@ + /* Copyright 2021 Milan Düwel + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#define COMBO_COUNT 4 +#define COMBO_TERM 100 + +//#define UNICODE_SELECTED_MODES UC_WINC + +#define RGBLIGHT_LAYERS +#define RGBLIGHT_LAYER_BLINK + +#undef RGBLIGHT_ANIMATIONS +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_TWINKLE + diff --git a/keyboards/melody96/keymaps/dvz/keymap.c b/keyboards/melody96/keymaps/dvz/keymap.c new file mode 100644 index 0000000000..cea3970e18 --- /dev/null +++ b/keyboards/melody96/keymaps/dvz/keymap.c @@ -0,0 +1,161 @@ + /* Copyright 2021 Milan Düwel + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + + /* This keymap is designed for use with a German keyboard layout. + * It is essentially the same as the default via keymap but adds combo functionality to type umlauts as well as lighting layers for various actions. + * Toggling the combo feature also disables KC_LGUI so both can be turned off for gaming. If you want to get rid of it without reflashing new firmware, use KC_RGUI instead. + * Layers 2 and 3 are currently unused but are configurable within via. + */ + +enum combos { + UML_AE, + UML_OE, + UML_UE, + UML_SZ +}; + +const uint16_t PROGMEM ae_combo[] = {KC_A, KC_E, COMBO_END}; +const uint16_t PROGMEM oe_combo[] = {KC_O, KC_E, COMBO_END}; +const uint16_t PROGMEM ue_combo[] = {KC_U, KC_E, COMBO_END}; +const uint16_t PROGMEM sz_combo[] = {KC_S, KC_Y, COMBO_END}; + +combo_t key_combos[COMBO_COUNT] = { + [UML_AE] = COMBO(ae_combo, KC_QUOT), + [UML_OE] = COMBO(oe_combo, KC_SCLN), + [UML_UE] = COMBO(ue_combo, KC_LBRC), + [UML_SZ] = COMBO(sz_combo, KC_MINS) +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_HOME, KC_END, KC_PGUP, KC_PGDN, KC_DEL, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PMNS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), MO(1), KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT), + + [1] = LAYOUT( + RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, + KC_TRNS, RGB_TOG, KC_TRNS, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLD, + BL_TOGG, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, CMB_TOG, BL_TOGG, BL_INC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_TRNS, KC_TRNS, KC_TRNS, KC_MUTE, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END, KC_TRNS, KC_TRNS, KC_MUTE), + + [2] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [3] = LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), +}; + +/* The lighting layers feature a caps indicator as well as layer blinks for mute and the function layer (blink only to allow unhindered adjustment of the RGB backlight settings). + Sadly these colours can not be customized within VIA. +*/ + +const rgblight_segment_t PROGMEM my_capslock_layer[] = RGBLIGHT_LAYER_SEGMENTS( + {0, 1, HSV_RED}, + {15, 17, HSV_RED} +); + +const rgblight_segment_t PROGMEM my_function_layer[] = RGBLIGHT_LAYER_SEGMENTS( + {10, 12, HSV_YELLOW} +); + +const rgblight_segment_t PROGMEM my_f2_layer[] = RGBLIGHT_LAYER_SEGMENTS( + {0, 17, HSV_CYAN} +); + +const rgblight_segment_t PROGMEM my_f3_layer[] = RGBLIGHT_LAYER_SEGMENTS( + {0, 17, HSV_PURPLE} +); + +const rgblight_segment_t PROGMEM my_flash_layer[] = RGBLIGHT_LAYER_SEGMENTS( + {0, 17, HSV_RED} +); + +// Now define the array of layers. Later layers take precedence +const rgblight_segment_t* const PROGMEM my_rgb_layers[] = RGBLIGHT_LAYERS_LIST( + my_capslock_layer, + my_function_layer, // Overrides caps lock layer + my_f2_layer, + my_f3_layer, + my_flash_layer +); + +void keyboard_post_init_user(void) { + // Enable the LED layers + rgblight_layers = my_rgb_layers; +}; + +bool led_update_user(led_t led_state) { + rgblight_set_layer_state(0, led_state.caps_lock); + return true; +}; + +layer_state_t layer_state_set_user(layer_state_t state) { + //rgblight_set_layer_state(1, layer_state_cmp(state, 1)); + rgblight_set_layer_state(2, layer_state_cmp(state, 2)); + rgblight_set_layer_state(3, layer_state_cmp(state, 3)); + return state; +}; + +// Note we user post_process_record_user because we want the state +// after the flag has been flipped... +void post_process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case KC_CAPS: + case KC_MUTE: + case CMB_TOG: + if (record->event.pressed) { + rgblight_blink_layer(4, 250); + } + break; + case MO(1): + if (record->event.pressed) { + rgblight_blink_layer(1, 250); + } + break; + } +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case KC_LGUI: //use combo toggle to disable the win key while gaming + if (record->event.pressed) { + if (is_combo_enabled()==false) { + return false; + } + } + return true; // Let QMK send the enter press/release events + default: + return true; // Process all other keycodes normally + } +}; diff --git a/keyboards/melody96/keymaps/dvz/readme.md b/keyboards/melody96/keymaps/dvz/readme.md new file mode 100644 index 0000000000..d82055244e --- /dev/null +++ b/keyboards/melody96/keymaps/dvz/readme.md @@ -0,0 +1,3 @@ +# DvZ's VIA compatible keymap with rolling umlauts for german typists + +Added by: [devilzmods](https://github.com/devilzmods) diff --git a/keyboards/melody96/keymaps/dvz/rules.mk b/keyboards/melody96/keymaps/dvz/rules.mk new file mode 100644 index 0000000000..a1e85f13f4 --- /dev/null +++ b/keyboards/melody96/keymaps/dvz/rules.mk @@ -0,0 +1,5 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes # reduce firmware size +COMBO_ENABLE = yes +#UNICODE_ENABLE = yes +BOOTLOADER = caterina diff --git a/keyboards/planck/keymaps/dvz/config.h b/keyboards/planck/keymaps/dvz/config.h new file mode 100644 index 0000000000..5535c3ca19 --- /dev/null +++ b/keyboards/planck/keymaps/dvz/config.h @@ -0,0 +1,73 @@ + /* Copyright 2021 Milan Düwel + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#ifdef AUDIO_ENABLE + #define STARTUP_SONG SONG(PLANCK_SOUND) + // #define STARTUP_SONG SONG(NO_SOUND) + + /*#define DEFAULT_LAYER_SONGS { + SONG(QWERTY_SOUND), \ + SONG(COLEMAK_SOUND), \ + SONG(DVORAK_SOUND) \ + }*/ + + #define PING_SOUND Q__NOTE(_A6), WD_NOTE(_E7) +#endif + +/* + * MIDI options + */ + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ + +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +// Most tactile encoders have detents every 4 stages +#define ENCODER_RESOLUTION 4 + +#define COMBO_COUNT 4 + +#ifdef AUDIO_ENABLE + #define DAC_SAMPLE_MAX 65535/2 +#endif + +#define RGBLIGHT_LAYERS +#define RGBLIGHT_SAT_STEP 5 +#define RGBLIGHT_VAL_STEP 8 +#define RGBLIGHT_SLEEP +#define RGBLED_NUM 9 + +#undef RGBLIGHT_ANIMATIONS +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_TWINKLE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL + +#define RGBLIGHT_RAINBOW_SWIRL_RANGE 127 diff --git a/keyboards/planck/keymaps/dvz/keymap.c b/keyboards/planck/keymaps/dvz/keymap.c new file mode 100644 index 0000000000..f1d213b42c --- /dev/null +++ b/keyboards/planck/keymaps/dvz/keymap.c @@ -0,0 +1,280 @@ +/* Copyright 2015-2017 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H +#include "muse.h" +#include "keymap_german.h" + +enum combos { + AE, + OE, + UE, + SZ +}; + +const uint16_t PROGMEM ae_combo[] = {KC_A, KC_E, COMBO_END}; +const uint16_t PROGMEM oe_combo[] = {KC_O, KC_E, COMBO_END}; +const uint16_t PROGMEM ue_combo[] = {KC_U, KC_E, COMBO_END}; +const uint16_t PROGMEM sz_combo[] = {KC_S, DE_Z, COMBO_END}; + +combo_t key_combos[COMBO_COUNT] = { + [AE] = COMBO(ae_combo, DE_AE), + [OE] = COMBO(oe_combo, DE_OE), + [UE] = COMBO(ue_combo, DE_UE), + [SZ] = COMBO(sz_combo, DE_SS) +}; + +enum planck_layers { + _QWERTZ, + _NUMPD, + _LOWER, + _RAISE, + _ADJUST +}; + +enum planck_keycodes { + QWERTZ = SAFE_RANGE, + NUMPD, + SCROLL +}; + +bool scroll = false; + +#ifdef AUDIO_ENABLE + float ping_song[][2] = SONG(PING_SOUND); +#endif + +#define LOWER MO(_LOWER) +#define RAISE MO(_RAISE) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* QWERTZ + * ,-----------------------------------------------------------------------------------. + * | RtEnc| Q | W | E | R | T | Z | U | I | O | P | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | + | - | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | SfTab| Y | X | C | V | B | N | M | , | . | Up |SfEnt | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Ctrl | GUI | NumPd| Alt | Num | Space | Sym | Del | Left | Down |Right | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTZ] = LAYOUT_planck_grid( + SCROLL, KC_Q, KC_W, KC_E, KC_R, KC_T, DE_Z, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, DE_PLUS, DE_MINS, +LSFT_T(KC_TAB),DE_Y, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_UP, KC_SFTENT, + KC_LCTL, KC_LGUI, NUMPD, KC_LALT, LOWER, KC_SPC, KC_SPC, RAISE, KC_DEL, KC_LEFT, KC_DOWN, KC_RGHT +), + +/* Numpad + * ,-----------------------------------------------------------------------------------. + * | | 7 | 8 | 9 | / | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | NLCK | 4 | 5 | 6 | - | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | 1 | 2 | 3 | + | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | . | 0 | , |NumOFF| Enter |Raise | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_NUMPD] = LAYOUT_planck_grid( + SFT_T(KC_PASTE),KC_P7, KC_P8, KC_P9, DE_SLSH, _______, _______, _______, _______, _______, _______, _______, + KC_NLCK, KC_P4, KC_P5, KC_P6, DE_MINS, _______, _______, _______, _______, _______, _______, _______, + _______, KC_P1, KC_P2, KC_P3, DE_PLUS, _______, _______, _______, _______, _______, _______, _______, + CTL_T(KC_COPY),KC_DOT, KC_P0, KC_COMM, NUMPD, KC_ENT, KC_ENT, _______, _______, _______, _______, _______ +), + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | ^ | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | F10 | F11 | F12 | F13 | F14 | F15 | | | |Pg Up | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | Home |Pg Dn | End | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = LAYOUT_planck_grid( + _______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, _______, + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, _______, _______, + _______, KC_F10, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, _______, _______, _______, KC_PGUP, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END +), + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | | ! | " | § | $ | % | & | / | ( | ) | = | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | ° | | | | | | | | ? | [ | ] | ' | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | \ | < | > | { | } | Vol+ | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | Brt- | Vol- | Brt+ | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = LAYOUT_planck_grid( + _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, DE_SLSH, DE_LPRN, DE_RPRN, DE_EQL, KC_BSPC, + KC_TILD, _______, _______, _______, _______, _______, DE_PIPE, DE_QUES, DE_LBRC, DE_RBRC, DE_QUOT, DE_HASH, + _______, _______, _______, _______, _______, DE_BSLS, DE_LABK, DE_RABK, DE_LCBR, DE_RCBR, KC_VOLU, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_BRID, KC_VOLD, KC_BRIU +), + +/* Adjust (Lower + Raise) + * v------------------------RGB CONTROL--------------------v + * ,-----------------------------------------------------------------------------------. + * | | Reset|Debug | RGB |RGBMOD| HUE+ | HUE- | SAT+ | SAT- |BRGTH+|BRGTH-| Del | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |PowOff| |MUSmod|Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak|Plover| | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof|TermOn|TermOf| | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = LAYOUT_planck_grid( + _______, RESET, DEBUG, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_DEL , + KC_POWER,_______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, _______, _______, _______, _______, _______, + _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, TERM_ON, TERM_OFF, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ +) + +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + /*case QWERTY: + if (record->event.pressed) { + print("mode just switched to qwerty and this is a huge string\n"); + set_single_persistent_default_layer(_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + set_single_persistent_default_layer(_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + set_single_persistent_default_layer(_DVORAK); + } + return false; + break;*/ + case NUMPD: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_SONG(ping_song); + #endif + if (layer_state_is(_NUMPD)) { + layer_off(_NUMPD); + } else { + layer_on(_NUMPD); + } + } + return false; + break; + case SCROLL: + if (record->event.pressed) { + scroll = true; + } else { + scroll = false; + } + default: + return true; + } +} + +void encoder_update(bool clockwise) { + if (layer_state_is(_NUMPD)){ + if (clockwise) { + tap_code(KC_RIGHT); + } else { + tap_code(KC_LEFT); + } + } else if (scroll) { //scroll fast mode + if (clockwise) { + tap_code(KC_PGDN); + } else { + tap_code(KC_PGUP); + } + } else { + if (clockwise) { + #ifdef MOUSEKEY_ENABLE + tap_code(KC_MS_WH_DOWN); + #else + tap_code(KC_PGDN); + #endif + } else { + #ifdef MOUSEKEY_ENABLE + tap_code(KC_MS_WH_UP); + #else + tap_code(KC_PGUP); + #endif + } + } +} + +void matrix_scan_user(void) { +} + +bool music_mask_user(uint16_t keycode) { + switch (keycode) { + case RAISE: + case LOWER: + return false; + default: + return true; + } +} +const rgblight_segment_t PROGMEM numbers_layer[] = RGBLIGHT_LAYER_SEGMENTS( + {3, 4, HSV_GREEN} +); +const rgblight_segment_t PROGMEM symbols_layer[] = RGBLIGHT_LAYER_SEGMENTS( + {2, 5, HSV_PURPLE} +); +const rgblight_segment_t PROGMEM numpad_layer[] = RGBLIGHT_LAYER_SEGMENTS( + {5, 4, HSV_RED} // Light 4 LEDs, starting with LED 6 +); +const rgblight_segment_t PROGMEM config_layer[] = RGBLIGHT_LAYER_SEGMENTS( + {2, 6, HSV_YELLOW} +); + +// Now define the array of layers. Later layers take precedence +const rgblight_segment_t* const PROGMEM my_rgb_layers[] = RGBLIGHT_LAYERS_LIST( + numbers_layer, + symbols_layer, + numpad_layer, // Overrides other layers + config_layer +); + +void keyboard_post_init_user(void) { + // Enable the LED layers + rgblight_layers = my_rgb_layers; +} + +layer_state_t layer_state_set_user(layer_state_t state) { + if (!(layer_state_is(_NUMPD))) { + state = update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST); + } + rgblight_set_layer_state(2, layer_state_cmp(state, 1)); + rgblight_set_layer_state(0, layer_state_cmp(state, 2)); + rgblight_set_layer_state(1, layer_state_cmp(state, 3)); + rgblight_set_layer_state(3, layer_state_cmp(state, 4)); + return state; +} diff --git a/keyboards/planck/keymaps/dvz/readme.md b/keyboards/planck/keymaps/dvz/readme.md new file mode 100644 index 0000000000..f4c1eb6ad8 --- /dev/null +++ b/keyboards/planck/keymaps/dvz/readme.md @@ -0,0 +1,11 @@ +# devilzmods's german Planck Layout + +- QWERTZ +- Lefthand Numpad layer (toggle) +- Standard Numbers (left) +- Symbols (right) +- Settings + +This layout feature "rolling umlauts". Typing ae, oe, ue, sz respectively gets recognized and spits out ä, ö, ü, ß. For this, your systems keyboard layout/language has to be set to DE/German + +The layout is also designed around a rotary encoder in the top left corner that switches between slow and fast scrolling in the default layer by pressing it down while turning. In the numpad layer it scrolls left/right and pressing it down holds shift to select while scrolling. diff --git a/keyboards/planck/keymaps/dvz/rules.mk b/keyboards/planck/keymaps/dvz/rules.mk new file mode 100644 index 0000000000..7216951bf9 --- /dev/null +++ b/keyboards/planck/keymaps/dvz/rules.mk @@ -0,0 +1,5 @@ +SRC += muse.c + +COMBO_ENABLE = yes +#VIA_ENABLE = yes +AUDIO_ENABLE = yes From ad6d85ef5a77f0fb810f5c850c24499a4886e458 Mon Sep 17 00:00:00 2001 From: Yang Hu Date: Fri, 5 Nov 2021 02:10:15 -0700 Subject: [PATCH 432/595] Add a new keyboard "Unicorne" (#12993) * Add keyboards/yanghu/unicorne initial files. * add default keymap to yanghu/unicorne * use slow i2c and enable internal pullup resistor * add oled to default keymaps * fix unicorne default keymap * fix encoder pad direction * fix marauder * add led matrix configs. * add encoder code to default keymap. * fix encoder direction * add readme, info.json and update copyright for c files. * fix build error by clean up include in unicorne.c * fix images in readme files * Fix various issues in PR #12993 feedback. * Added copyright in glcdfont, fix include in that file. * Removed `_kc` layout and renamed layout with generic style. * Moved capslock oled update to oled.c inside `oled_task_user()`. * Update keyboards/yanghu/unicorne/keymaps/default/rules.mk Always include oled.c Co-authored-by: Drashna Jaelre * Update keyboards/yanghu/unicorne/keymaps/default/oled.c Wrap `oled.c` with ifdef. Co-authored-by: Drashna Jaelre * Update keyboards/yanghu/unicorne/keymaps/default/oled.c Co-authored-by: Drashna Jaelre * move oled code to unicorne.c, and set weakly. * Update keyboards/yanghu/unicorne/config.h Co-authored-by: Drashna Jaelre * Update keyboards/yanghu/unicorne/keymaps/default/keymap.c Co-authored-by: Drashna Jaelre * Update keyboards/yanghu/unicorne/keymaps/default/keymap.c Co-authored-by: Drashna Jaelre * Update keyboards/yanghu/unicorne/keymaps/default/keymap.c Co-authored-by: Drashna Jaelre * Update keyboards/yanghu/unicorne/unicorne.c Co-authored-by: Drashna Jaelre * Update keyboards/yanghu/unicorne/readme.md Co-authored-by: Ryan * Update keyboards/yanghu/unicorne/readme.md Co-authored-by: Ryan * Update keyboards/yanghu/unicorne/readme.md Co-authored-by: Ryan * Update keyboards/yanghu/unicorne/readme.md Co-authored-by: Ryan * Update keyboards/yanghu/unicorne/keymaps/default/oled.c Co-authored-by: Ryan * Update keyboards/yanghu/unicorne/f411/rules.mk Co-authored-by: Ryan * Update keyboards/yanghu/unicorne/rules.mk Co-authored-by: Ryan * remove oled.h * remove include of oled.h after the file is deleted. * Apply suggestions from code review: remove redundant macros and reformat. Co-authored-by: Drashna Jaelre Co-authored-by: Ryan * Apply suggestions from code review: change OLED driver macro. Use `OLED_ENABLE` instead of `OLED_DRIVER_ENABLE`. Co-authored-by: Jonathan Rascher Co-authored-by: Drashna Jaelre Co-authored-by: Ryan Co-authored-by: Jonathan Rascher --- keyboards/yanghu/unicorne/config.h | 76 ++++++ keyboards/yanghu/unicorne/f411/halconf.h | 27 ++ keyboards/yanghu/unicorne/f411/mcuconf.h | 34 +++ keyboards/yanghu/unicorne/f411/rules.mk | 5 + keyboards/yanghu/unicorne/glcdfont.c | 247 ++++++++++++++++++ keyboards/yanghu/unicorne/info.json | 62 +++++ .../yanghu/unicorne/keymaps/default/config.h | 22 ++ .../yanghu/unicorne/keymaps/default/keymap.c | 92 +++++++ .../yanghu/unicorne/keymaps/default/layers.h | 24 ++ .../yanghu/unicorne/keymaps/default/oled.c | 67 +++++ .../yanghu/unicorne/keymaps/default/readme.md | 10 + .../yanghu/unicorne/keymaps/default/rules.mk | 1 + keyboards/yanghu/unicorne/readme.md | 17 ++ keyboards/yanghu/unicorne/rules.mk | 26 ++ keyboards/yanghu/unicorne/unicorne.c | 148 +++++++++++ keyboards/yanghu/unicorne/unicorne.h | 50 ++++ 16 files changed, 908 insertions(+) create mode 100644 keyboards/yanghu/unicorne/config.h create mode 100644 keyboards/yanghu/unicorne/f411/halconf.h create mode 100644 keyboards/yanghu/unicorne/f411/mcuconf.h create mode 100644 keyboards/yanghu/unicorne/f411/rules.mk create mode 100644 keyboards/yanghu/unicorne/glcdfont.c create mode 100644 keyboards/yanghu/unicorne/info.json create mode 100644 keyboards/yanghu/unicorne/keymaps/default/config.h create mode 100644 keyboards/yanghu/unicorne/keymaps/default/keymap.c create mode 100644 keyboards/yanghu/unicorne/keymaps/default/layers.h create mode 100644 keyboards/yanghu/unicorne/keymaps/default/oled.c create mode 100644 keyboards/yanghu/unicorne/keymaps/default/readme.md create mode 100644 keyboards/yanghu/unicorne/keymaps/default/rules.mk create mode 100644 keyboards/yanghu/unicorne/readme.md create mode 100644 keyboards/yanghu/unicorne/rules.mk create mode 100644 keyboards/yanghu/unicorne/unicorne.c create mode 100644 keyboards/yanghu/unicorne/unicorne.h diff --git a/keyboards/yanghu/unicorne/config.h b/keyboards/yanghu/unicorne/config.h new file mode 100644 index 0000000000..652afeb3b4 --- /dev/null +++ b/keyboards/yanghu/unicorne/config.h @@ -0,0 +1,76 @@ +/* Copyright 2021 Yang Hu + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x0204 +#define DEVICE_VER 0x0001 +#define MANUFACTURER yanghu +#define PRODUCT unicorne + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 + +#define MATRIX_COL_PINS \ + { A14, A15, B13, B14, B15, A13, A0, A1, A2, A3, A6, A7 } +#define MATRIX_ROW_PINS \ + { B9, B8, A10, A9 } + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +#define ENCODERS_PAD_A \ + { B10, B2 } +#define ENCODERS_PAD_B \ + { B12, B0 } + +/* Audio */ +#define AUDIO_PIN A8 +#define AUDIO_PWM_PAL_MODE 1 +#define AUDIO_PWM_DRIVER PWMD1 +#define AUDIO_PWM_CHANNEL 1 +#define AUDIO_STATE_TIMER GPTD4 + +/* RGB LED */ +#define RGB_DI_PIN B1 +#define RGBLED_NUM 8 +#define DRIVER_LED_TOTAL RGBLED_NUM +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE + +#define WS2812_PWM_DRIVER PWMD3 +#define WS2812_PWM_CHANNEL 4 +#define WS2812_PWM_PAL_MODE 2 +#define WS2812_DMA_STREAM STM32_DMA1_STREAM2 +#define WS2812_DMA_CHANNEL 5 +#define WS2812_EXTERNAL_PULLUP + + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 diff --git a/keyboards/yanghu/unicorne/f411/halconf.h b/keyboards/yanghu/unicorne/f411/halconf.h new file mode 100644 index 0000000000..d28ae12fde --- /dev/null +++ b/keyboards/yanghu/unicorne/f411/halconf.h @@ -0,0 +1,27 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +/* PWM for AUDIO and RGB LED */ +#define HAL_USE_PWM TRUE +/* GPT and PAL for Audio */ +#define HAL_USE_GPT TRUE +#define HAL_USE_PAL TRUE +/* I2C for OLED display */ +#define HAL_USE_I2C TRUE + +#include_next diff --git a/keyboards/yanghu/unicorne/f411/mcuconf.h b/keyboards/yanghu/unicorne/f411/mcuconf.h new file mode 100644 index 0000000000..f4dc31bff2 --- /dev/null +++ b/keyboards/yanghu/unicorne/f411/mcuconf.h @@ -0,0 +1,34 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include_next + +/* TIM1 PWM used for audio driver */ +#undef STM32_PWM_USE_TIM1 +#define STM32_PWM_USE_TIM1 TRUE +/* TIM5 GPT used for audio driver */ +#undef STM32_GPT_USE_TIM4 +#define STM32_GPT_USE_TIM4 TRUE + +/* TIM3 used for WS2812 driver */ +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 TRUE + +/* I2C used for OLED display */ +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE diff --git a/keyboards/yanghu/unicorne/f411/rules.mk b/keyboards/yanghu/unicorne/f411/rules.mk new file mode 100644 index 0000000000..b32a8b7f5b --- /dev/null +++ b/keyboards/yanghu/unicorne/f411/rules.mk @@ -0,0 +1,5 @@ +# MCU name +MCU = STM32F411 + +# Bootloader selection +BOOTLOADER = stm32-dfu diff --git a/keyboards/yanghu/unicorne/glcdfont.c b/keyboards/yanghu/unicorne/glcdfont.c new file mode 100644 index 0000000000..24c06471ff --- /dev/null +++ b/keyboards/yanghu/unicorne/glcdfont.c @@ -0,0 +1,247 @@ +/* Copyright 2021 Yang Hu + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "progmem.h" + +// clang-format off +const unsigned char font[] PROGMEM = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00, + 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00, + 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00, + 0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00, + 0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00, + 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00, + 0x00, 0x18, 0x3C, 0x18, 0x00, 0x00, + 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00, + 0x00, 0x18, 0x24, 0x18, 0x00, 0x00, + 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00, + 0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00, + 0x26, 0x29, 0x79, 0x29, 0x26, 0x00, + 0x40, 0x7F, 0x05, 0x05, 0x07, 0x00, + 0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00, + 0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00, + 0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00, + 0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00, + 0x14, 0x22, 0x7F, 0x22, 0x14, 0x00, + 0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00, + 0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00, + 0x00, 0x66, 0x89, 0x95, 0x6A, 0x00, + 0x60, 0x60, 0x60, 0x60, 0x60, 0x00, + 0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00, + 0x08, 0x04, 0x7E, 0x04, 0x08, 0x00, + 0x10, 0x20, 0x7E, 0x20, 0x10, 0x00, + 0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00, + 0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00, + 0x1E, 0x10, 0x10, 0x10, 0x10, 0x00, + 0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00, + 0x30, 0x38, 0x3E, 0x38, 0x30, 0x00, + 0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x5F, 0x00, 0x00, 0x00, + 0x00, 0x07, 0x00, 0x07, 0x00, 0x00, + 0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00, + 0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00, + 0x23, 0x13, 0x08, 0x64, 0x62, 0x00, + 0x36, 0x49, 0x56, 0x20, 0x50, 0x00, + 0x00, 0x08, 0x07, 0x03, 0x00, 0x00, + 0x00, 0x1C, 0x22, 0x41, 0x00, 0x00, + 0x00, 0x41, 0x22, 0x1C, 0x00, 0x00, + 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00, + 0x08, 0x08, 0x3E, 0x08, 0x08, 0x00, + 0x00, 0x80, 0x70, 0x30, 0x00, 0x00, + 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, + 0x00, 0x00, 0x60, 0x60, 0x00, 0x00, + 0x20, 0x10, 0x08, 0x04, 0x02, 0x00, + 0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00, + 0x00, 0x42, 0x7F, 0x40, 0x00, 0x00, + 0x72, 0x49, 0x49, 0x49, 0x46, 0x00, + 0x21, 0x41, 0x49, 0x4D, 0x33, 0x00, + 0x18, 0x14, 0x12, 0x7F, 0x10, 0x00, + 0x27, 0x45, 0x45, 0x45, 0x39, 0x00, + 0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00, + 0x41, 0x21, 0x11, 0x09, 0x07, 0x00, + 0x36, 0x49, 0x49, 0x49, 0x36, 0x00, + 0x46, 0x49, 0x49, 0x29, 0x1E, 0x00, + 0x00, 0x00, 0x14, 0x00, 0x00, 0x00, + 0x00, 0x40, 0x34, 0x00, 0x00, 0x00, + 0x00, 0x08, 0x14, 0x22, 0x41, 0x00, + 0x14, 0x14, 0x14, 0x14, 0x14, 0x00, + 0x00, 0x41, 0x22, 0x14, 0x08, 0x00, + 0x02, 0x01, 0x59, 0x09, 0x06, 0x00, + 0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00, + 0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00, + 0x7F, 0x49, 0x49, 0x49, 0x36, 0x00, + 0x3E, 0x41, 0x41, 0x41, 0x22, 0x00, + 0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00, + 0x7F, 0x49, 0x49, 0x49, 0x41, 0x00, + 0x7F, 0x09, 0x09, 0x09, 0x01, 0x00, + 0x3E, 0x41, 0x41, 0x51, 0x73, 0x00, + 0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00, + 0x00, 0x41, 0x7F, 0x41, 0x00, 0x00, + 0x20, 0x40, 0x41, 0x3F, 0x01, 0x00, + 0x7F, 0x08, 0x14, 0x22, 0x41, 0x00, + 0x7F, 0x40, 0x40, 0x40, 0x40, 0x00, + 0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00, + 0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00, + 0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00, + 0x7F, 0x09, 0x09, 0x09, 0x06, 0x00, + 0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00, + 0x7F, 0x09, 0x19, 0x29, 0x46, 0x00, + 0x26, 0x49, 0x49, 0x49, 0x32, 0x00, + 0x03, 0x01, 0x7F, 0x01, 0x03, 0x00, + 0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00, + 0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00, + 0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00, + 0x63, 0x14, 0x08, 0x14, 0x63, 0x00, + 0x03, 0x04, 0x78, 0x04, 0x03, 0x00, + 0x61, 0x59, 0x49, 0x4D, 0x43, 0x00, + 0x00, 0x7F, 0x41, 0x41, 0x41, 0x00, + 0x02, 0x04, 0x08, 0x10, 0x20, 0x00, + 0x00, 0x41, 0x41, 0x41, 0x7F, 0x00, + 0x04, 0x02, 0x01, 0x02, 0x04, 0x00, + 0x40, 0x40, 0x40, 0x40, 0x40, 0x00, + 0x00, 0x03, 0x07, 0x08, 0x00, 0x00, + 0x20, 0x54, 0x54, 0x78, 0x40, 0x00, + 0x7F, 0x28, 0x44, 0x44, 0x38, 0x00, + 0x38, 0x44, 0x44, 0x44, 0x28, 0x00, + 0x38, 0x44, 0x44, 0x28, 0x7F, 0x00, + 0x38, 0x54, 0x54, 0x54, 0x18, 0x00, + 0x00, 0x08, 0x7E, 0x09, 0x02, 0x00, + 0x58, 0xA4, 0xA4, 0x9C, 0x78, 0x00, + 0x7F, 0x08, 0x04, 0x04, 0x78, 0x00, + 0x00, 0x44, 0x7D, 0x40, 0x00, 0x00, + 0x20, 0x40, 0x40, 0x3D, 0x00, 0x00, + 0x7F, 0x10, 0x28, 0x44, 0x00, 0x00, + 0x00, 0x41, 0x7F, 0x40, 0x00, 0x00, + 0x7C, 0x04, 0x78, 0x04, 0x78, 0x00, + 0x7C, 0x08, 0x04, 0x04, 0x78, 0x00, + 0x38, 0x44, 0x44, 0x44, 0x38, 0x00, + 0xFC, 0x18, 0x24, 0x24, 0x18, 0x00, + 0x18, 0x24, 0x24, 0x18, 0xFC, 0x00, + 0x7C, 0x08, 0x04, 0x04, 0x08, 0x00, + 0x48, 0x54, 0x54, 0x54, 0x24, 0x00, + 0x04, 0x04, 0x3F, 0x44, 0x24, 0x00, + 0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00, + 0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00, + 0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00, + 0x44, 0x28, 0x10, 0x28, 0x44, 0x00, + 0x4C, 0x10, 0x10, 0x10, 0x7C, 0x00, + 0x44, 0x64, 0x54, 0x4C, 0x44, 0x00, + 0x00, 0x08, 0x36, 0x41, 0x00, 0x00, + 0x00, 0x00, 0x77, 0x00, 0x00, 0x00, + 0x00, 0x41, 0x36, 0x08, 0x00, 0x00, + 0x02, 0x01, 0x02, 0x04, 0x02, 0x00, + 0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00, + 0x00, 0x00, 0xF0, 0xF8, 0x9C, 0x0C, + 0x0C, 0x1C, 0xF8, 0xE0, 0x00, 0x00, + 0x00, 0xE0, 0xF8, 0x1C, 0x0C, 0x0C, + 0x9C, 0xF8, 0x60, 0x00, 0x00, 0x00, + 0x00, 0x0C, 0x0C, 0x0C, 0x3C, 0xF8, + 0xC0, 0x00, 0x00, 0x00, 0x00, 0x0C, + 0x0C, 0x0C, 0x0C, 0x0C, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x80, 0xC0, 0xE0, + 0xF0, 0xF8, 0xFC, 0xFC, 0xF8, 0xF0, + 0xE0, 0xC0, 0x80, 0x00, 0x00, 0x00, + 0x00, 0x00, 0xC0, 0xE0, 0x70, 0x38, + 0x1C, 0x0C, 0x06, 0x86, 0x86, 0x86, + 0x86, 0x86, 0xC6, 0xC6, 0x0C, 0x1C, + 0x38, 0xF0, 0xE0, 0xC0, 0x00, 0x00, + 0x00, 0x60, 0xF8, 0x0C, 0x24, 0xE6, + 0xE6, 0x24, 0x06, 0x06, 0x24, 0xE6, + 0xE6, 0x24, 0x06, 0x06, 0x24, 0xE6, + 0xE6, 0x24, 0x0C, 0xF8, 0x60, 0x00, + 0x00, 0xE0, 0xF0, 0x18, 0x0C, 0x04, + 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, + 0x86, 0x86, 0xC6, 0x46, 0xE6, 0x66, + 0x04, 0x0C, 0x18, 0xF0, 0xE0, 0x00, + 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0xFE, 0x8A, 0x92, 0xA2, 0xC2, + 0xFE, 0xC2, 0xA2, 0x92, 0x0A, 0x02, + 0x82, 0xE2, 0x7A, 0x5A, 0x42, 0x42, + 0x42, 0xC2, 0xC2, 0x42, 0xFE, 0x00, + 0xFE, 0x02, 0x02, 0x02, 0x02, 0x02, + 0x02, 0x02, 0x82, 0xE2, 0xFA, 0x7A, + 0xFA, 0xE2, 0x82, 0x02, 0x02, 0x02, + 0x02, 0x02, 0x02, 0x02, 0xFE, 0x00, + 0x00, 0x00, 0x00, 0x81, 0x81, 0xC3, + 0xC3, 0xC3, 0xFF, 0xFF, 0xC3, 0xC3, + 0xC3, 0xFF, 0xFF, 0xC3, 0xC3, 0xC3, + 0x81, 0x81, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x03, 0x0F, 0x3C, 0xF0, 0xC0, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x06, 0x07, 0x07, 0x07, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0x07, 0x07, 0x07, 0x06, 0x00, + 0x00, 0x00, 0xFF, 0xFF, 0x00, 0x00, + 0x00, 0x00, 0x7F, 0xFF, 0xC1, 0xC1, + 0xC1, 0xC1, 0xFF, 0x7F, 0xE0, 0x80, + 0x80, 0xC0, 0xFF, 0x7F, 0x00, 0x00, + 0x00, 0xDB, 0xFF, 0x00, 0x00, 0x1F, + 0x3F, 0x70, 0xE0, 0xC0, 0xC0, 0xFF, + 0xFF, 0xC0, 0xC0, 0xE0, 0x70, 0x3F, + 0x1F, 0x00, 0x00, 0xFF, 0xDB, 0x00, + 0x00, 0xFF, 0xFF, 0x00, 0x00, 0x00, + 0xC0, 0xF8, 0xFE, 0xFF, 0xF9, 0xF1, + 0x61, 0x60, 0x3C, 0x07, 0x01, 0x00, + 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x00, + 0x00, 0x00, 0xC0, 0xF0, 0x3C, 0x0E, + 0x0E, 0x3C, 0xF0, 0xC0, 0x00, 0x00, + 0x00, 0xFF, 0x48, 0x44, 0xC2, 0xE1, + 0x7F, 0x51, 0xC2, 0xC4, 0x4C, 0x06, + 0x03, 0x0F, 0x38, 0x60, 0xC0, 0xE0, + 0x38, 0x0F, 0x00, 0x00, 0xFF, 0x00, + 0xFF, 0x00, 0x00, 0x00, 0x80, 0xE0, + 0xF8, 0x7E, 0x67, 0x63, 0x60, 0x60, + 0x60, 0x63, 0x67, 0x7E, 0xF8, 0xE0, + 0x80, 0x00, 0x00, 0x00, 0xFF, 0x00, + 0x00, 0x00, 0x0F, 0x1F, 0x39, 0x30, + 0x30, 0x18, 0x1F, 0x07, 0x00, 0x00, + 0x00, 0x07, 0x1F, 0x38, 0x30, 0x30, + 0x39, 0x1F, 0x06, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x03, 0x0F, + 0x3C, 0x30, 0x30, 0x30, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, + 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, 0x1F, + 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x03, 0x07, 0x0E, + 0x1C, 0x38, 0x30, 0x30, 0x30, 0x30, + 0x30, 0x30, 0x38, 0x18, 0x18, 0x01, + 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x06, 0x1F, 0x30, 0x20, 0x60, + 0x60, 0x20, 0x64, 0x64, 0x26, 0x67, + 0x67, 0x26, 0x64, 0x64, 0x20, 0x60, + 0x60, 0x20, 0x30, 0x1F, 0x06, 0x00, + 0x00, 0x07, 0x0F, 0x18, 0x30, 0x23, + 0x63, 0x61, 0x61, 0x60, 0x60, 0x60, + 0x60, 0x60, 0x60, 0x60, 0x60, 0x60, + 0x20, 0x30, 0x18, 0x0F, 0x07, 0x00, + 0x0C, 0x0F, 0x03, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x03, 0x0F, 0x0C, + 0x00, 0x7F, 0x60, 0x71, 0x53, 0x5E, + 0x4C, 0x4E, 0x5B, 0x50, 0x60, 0x70, + 0x58, 0x4C, 0x46, 0x43, 0x41, 0x43, + 0x4E, 0x78, 0x70, 0x60, 0x7F, 0x00, + 0x7F, 0x40, 0x4C, 0x4E, 0x4F, 0x43, + 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, + 0x40, 0x40, 0x40, 0x40, 0x40, 0x43, + 0x4F, 0x4E, 0x4C, 0x40, 0x7F, 0x00, +}; +// clang-format on diff --git a/keyboards/yanghu/unicorne/info.json b/keyboards/yanghu/unicorne/info.json new file mode 100644 index 0000000000..995bed8a03 --- /dev/null +++ b/keyboards/yanghu/unicorne/info.json @@ -0,0 +1,62 @@ +{ + "keyboard_name": "Unicorne", + "url": "https://github.com/yanghu/unicorne", + "maintainer": "yanghu", + "layouts": { + "LAYOUT_unicorne": { + "layout": [ + {"label":"Tab", "x":0, "y":0.8}, + {"label":"Q", "x":1, "y":0.8}, + {"label":"W", "x":2, "y":0.1}, + {"label":"E", "x":3, "y":0}, + {"label":"R", "x":4, "y":0.1}, + {"label":"T", "x":5, "y":0.2}, + + {"label":"Y", "x":9, "y":0.2}, + {"label":"U", "x":10, "y":0.1}, + {"label":"I", "x":11, "y":0}, + {"label":"O", "x":12, "y":0.1}, + {"label":"P", "x":13, "y":0.8}, + {"label":"Back Space", "x":14, "y":0.8}, + + {"label":"Ctrl / Esc", "x":0, "y":1.8}, + {"label":"A", "x":1, "y":1.8}, + {"label":"S", "x":2, "y":1.1}, + {"label":"D", "x":3, "y":1}, + {"label":"F", "x":4, "y":1.1}, + {"label":"G", "x":5, "y":1.2}, + + {"label":"H", "x":9, "y":1.2}, + {"label":"J", "x":10, "y":1.1}, + {"label":"K", "x":11, "y":1}, + {"label":"L", "x":12, "y":1.1}, + {"label":";", "x":13, "y":1.8}, + {"label":"'", "x":14, "y":1.8}, + + {"label":"Shift", "x":0, "y":2.8}, + {"label":"Z", "x":1, "y":2.8}, + {"label":"X", "x":2, "y":2.1}, + {"label":"C", "x":3, "y":2}, + {"label":"V", "x":4, "y":2.1}, + {"label":"B", "x":5, "y":2.2}, + + {"label":"N", "x":9, "y":2.2}, + {"label":"M", "x":10, "y":2.1}, + {"label":",", "x":11, "y":2}, + {"label":".", "x":12, "y":2.1}, + {"label":"/", "x":13, "y":2.8}, + {"label":"Shift / Enter", "x":14, "y":2.8}, + + {"label":"Ctrl", "x":3, "y":3.7}, + {"label":"Alt", "x":4, "y":3.7}, + {"label":"Lower", "x":5, "y":3.7}, + {"label":"Enter", "x":6, "y":3.2, "h":1.5}, + + {"label":"Backspace", "x":8, "y":3.2, "h":1.5}, + {"label":"Space", "x":9, "y":3.7}, + {"label":"Raise", "x":10, "y":3.7}, + {"label":"RGUI", "x":11, "y":3.7} + ] + } + } +} diff --git a/keyboards/yanghu/unicorne/keymaps/default/config.h b/keyboards/yanghu/unicorne/keymaps/default/config.h new file mode 100644 index 0000000000..e7ee9814ef --- /dev/null +++ b/keyboards/yanghu/unicorne/keymaps/default/config.h @@ -0,0 +1,22 @@ +/* Copyright 2021 Yang Hu + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#define OLED_FONT_H "keyboards/yanghu/unicorne/glcdfont.c" +#define ENCODER_RESOLUTION 4 +#define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_BREATHING +#define RGBLIGHT_DEFAULT_COLOR HSV_BLUE diff --git a/keyboards/yanghu/unicorne/keymaps/default/keymap.c b/keyboards/yanghu/unicorne/keymaps/default/keymap.c new file mode 100644 index 0000000000..26fb014260 --- /dev/null +++ b/keyboards/yanghu/unicorne/keymaps/default/keymap.c @@ -0,0 +1,92 @@ +/* Copyright 2021 Yang Hu + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H +#include "layers.h" + +#define LOWER MO(_LOWER) +#define RAISE MO(_RAISE) +#define ADJUST MO(_ADJUST) + +// clang-format off +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_split_3x6_4( + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + LCTL_T(KC_ESC), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, RSFT_T(KC_ENT), + KC_LCTL, KC_LALT, LOWER, KC_ENT, KC_BSPC, KC_SPC, RAISE, KC_RGUI + ), + + [_LOWER] = LAYOUT_split_3x6_4( + _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_DEL, + _______, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_GRV, KC_TILD, + _______, KC_ESC, KC_LGUI, KC_LALT, KC_CAPS, KC_DQUO, KC_HOME, KC_END, KC_PGUP, KC_PGDN, KC_PSCR, RSFT_T(KC_SPC), + _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [_RAISE] = LAYOUT_split_3x6_4( + _______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL, + _______, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, + _______, KC_ESC, KC_RGUI, KC_RALT, KC_CAPS, KC_QUOT, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [_ADJUST] = LAYOUT_split_3x6_4( + RGB_VAI, RGB_SAI, RGB_HUI, RGB_MOD, XXXXXXX, RGB_TOG, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + RGB_VAD, RGB_SAD, RGB_HUD, RGB_RMOD, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RESET, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; +// clang-format on +layer_state_t layer_state_set_user(layer_state_t state) { return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST); } + +// Left encoder scrolls the mousewheel. Right encoder adjusts underglow hue. +bool encoder_update_user(uint8_t index, bool clockwise) { + if (index == 0) { + if (clockwise) { +#ifdef MOUSEKEY_ENABLE + tap_code(KC_MS_WH_DOWN); +#else + tap_code(KC_PGDN); +#endif + } else { +#ifdef MOUSEKEY_ENABLE + tap_code(KC_MS_WH_UP); +#else + tap_code(KC_PGUP); +#endif + } + } else { // index = 1: right encoder + if (clockwise) { +#ifdef RGB_MATRIX_ENABLE + rgb_matrix_step(); +#else + rgblight_increase_hue_noeeprom(); +#endif + } else { +#ifdef RGB_MATRIX_ENABLE + rgb_matrix_step_reverse(); +#else + rgblight_decrease_hue_noeeprom(); +#endif + } + } + return false; +} + +// Set underglow color to blue. +void keyboard_post_init_user(void) { rgblight_sethsv_noeeprom(RGBLIGHT_DEFAULT_COLOR); } diff --git a/keyboards/yanghu/unicorne/keymaps/default/layers.h b/keyboards/yanghu/unicorne/keymaps/default/layers.h new file mode 100644 index 0000000000..0505d4956b --- /dev/null +++ b/keyboards/yanghu/unicorne/keymaps/default/layers.h @@ -0,0 +1,24 @@ +/* Copyright 2021 Yang Hu + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _LOWER, + _RAISE, + _ADJUST, +}; diff --git a/keyboards/yanghu/unicorne/keymaps/default/oled.c b/keyboards/yanghu/unicorne/keymaps/default/oled.c new file mode 100644 index 0000000000..417f573ff0 --- /dev/null +++ b/keyboards/yanghu/unicorne/keymaps/default/oled.c @@ -0,0 +1,67 @@ +/* Copyright 2021 Yang Hu + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#ifdef OLED_ENABLE +# include QMK_KEYBOARD_H +# include "layers.h" + +// Some characters position: +// alt: 84 85 86/a..../c... +// shift:87 88 89/a.../c... +// ctrl: b6 b6/d.../ +// capslock: 9c-9f/b.../d... +// numlock: 98-9b/b.../d... +// navigation logo: 92-95/b2.../d2... +// symbol logo: 8a-8d/aa..../ca.... +// qmk logos; 8e-91/ae..../ce.... +void oled_render_layer(void) { + /* static const char PROGMEM cmd_logo[] = { */ + /* 0x80, 0x81, 0x82, 0x83, 10, */ + /* 0xa0, 0xa1, 0xa2, 0xa3, 10, */ + /* 0xc0, 0xc1, 0xc2, 0xc3, 10, */ + /* 0}; */ + // clang-format off + static const char PROGMEM numlock_logo[] = { + 0x98, 0x99, 0x9a, 0x9b, 10, + 0xb8, 0xb9, 0xba, 0xbb, 10, + 0xd8, 0xd9, 0xda, 0xdb, 10, 0}; + static const char PROGMEM symbol_logo[] = { + 0x8a, 0x8b, 0x8c, 0x8d, 10, + 0xaa, 0xab, 0xac, 0xad, 10, + 0xca, 0xcb, 0xcc, 0xcd, 10, 0}; + static const char PROGMEM qmk_logo[] = { + 0x8e, 0x8f, 0x90, 0x91, 10, + 0xae, 0xaf, 0xb0, 0xb1, 10, + 0xce, 0xcf, 0xd0, 0xd1, 10, 0}; + // clang-format on + if (IS_LAYER_ON(_LOWER)) { + oled_write_P(symbol_logo, false); + } else if (IS_LAYER_ON(_RAISE)) { + oled_write_P(numlock_logo, false); + } else if (IS_LAYER_ON(_BASE)) { + oled_write_P(qmk_logo, false); + } else { + if (IS_LAYER_ON(_ADJUST)) { + oled_write_ln("ADJ", false); + } else { + oled_write_ln("?????", false); + } + oled_write_ln(" ", false); + oled_write_ln(" ", false); + oled_write_ln(" ", false); + } +} + +#endif diff --git a/keyboards/yanghu/unicorne/keymaps/default/readme.md b/keyboards/yanghu/unicorne/keymaps/default/readme.md new file mode 100644 index 0000000000..b6ce9e4237 --- /dev/null +++ b/keyboards/yanghu/unicorne/keymaps/default/readme.md @@ -0,0 +1,10 @@ +![keymap](https://imgur.com/48cFzA5.jpg) + +# Default Unicorne Layout + +This is the default layout for Unicorne. The "lower" layer consists of symbols +and navigation, while "raises' has numbers, some other symbols and function +keys. + +Press `lower` and `raise` together activates `adjust` layer, with RGB controls, +as well as access to reset/bootloader. diff --git a/keyboards/yanghu/unicorne/keymaps/default/rules.mk b/keyboards/yanghu/unicorne/keymaps/default/rules.mk new file mode 100644 index 0000000000..dbfa81b6ce --- /dev/null +++ b/keyboards/yanghu/unicorne/keymaps/default/rules.mk @@ -0,0 +1 @@ +SRC += oled.c diff --git a/keyboards/yanghu/unicorne/readme.md b/keyboards/yanghu/unicorne/readme.md new file mode 100644 index 0000000000..3da5e97bf4 --- /dev/null +++ b/keyboards/yanghu/unicorne/readme.md @@ -0,0 +1,17 @@ +# Unicorne + +![Unicorne](https://imgur.com/g1nN3b4h.jpg) + +A compact 40% (3x6\_4) single-piece angled ortholinear ergo keyboard kit inspired by crkbd, Kyria, Ferris and Reviung41. Features OLED display, audio buzzer, RGB LED underglow as well as encoders. + +* Keyboard Maintainer: [Yang Hu](https://github.com/yanghu) +* Hardware Supported: Unicorne PCB 1.0 +* Hardware Availability: Open source design at https://github.com/yanghu/unicorne + +To enter bootloader, long press the reset button for 3-5 seconds then release. More details can be found at [keyboard wiki](https://github.com/yanghu/unicorne/wiki/Build-guide#testing-the-board). + +Make example for this keyboard (after setting up your build environment): + + make yanghu/unicorne:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/yanghu/unicorne/rules.mk b/keyboards/yanghu/unicorne/rules.mk new file mode 100644 index 0000000000..17296a9bc2 --- /dev/null +++ b/keyboards/yanghu/unicorne/rules.mk @@ -0,0 +1,26 @@ +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = yes # Audio output +ENCODER_ENABLE = yes +OLED_ENABLE = yes +OLED_DRIVER = SSD1306 + +WS2812_DRIVER = pwm +AUDIO_DRIVER = pwm_hardware + +RGB_MATRIX_ENABLE = no # Do not enable with RGBLIGHT +RGB_MATRIX_DRIVER = WS2812 + +DEFAULT_FOLDER = yanghu/unicorne/f411 diff --git a/keyboards/yanghu/unicorne/unicorne.c b/keyboards/yanghu/unicorne/unicorne.c new file mode 100644 index 0000000000..27b87253df --- /dev/null +++ b/keyboards/yanghu/unicorne/unicorne.c @@ -0,0 +1,148 @@ +/* Copyright 2021 Yang Hu + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "unicorne.h" + + +// Custom i2c init to enable internal pull up resistor for i2c. +void i2c_init(void) { + static bool is_initialised = false; + if (!is_initialised) { + is_initialised = true; + + // Try releasing special pins for a short time + palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_INPUT); + palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_INPUT); + + chThdSleepMilliseconds(10); + // Use internal pull up since we do not have pull up on i2c pins in v1 design. + palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_ALTERNATE(I2C1_SCL_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP); + palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_ALTERNATE(I2C1_SDA_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP); + } +} + +// LED matrix +// physical location +// 2 3 4 5 +// +// 1 6 +// 0 7 +#ifdef RGB_MATRIX_ENABLE +// clang-format off +led_config_t g_led_config = {{ + // Key Matrix to LED Index + // Since we only have 8 LEDs, map the keys near them to the same LED. + {2, 2, 2, 3, 3, 3, 4, 4, 4, 5, 5, 5}, + {2, 2, 2, 3, 3, 3, 4, 4, 4, 5, 5, 5}, + {1, 1, 1, 0, 0, 0, 7, 7, 7, 6, 6, 6}, + {NO_LED, NO_LED, NO_LED, 0, 0, 0, 7, 7, 7, NO_LED, NO_LED, NO_LED}, +}, {// LED Index to Physical Position + {94, 60}, + {18, 44}, + {8, 10}, + {94, 10}, + {130,10}, + {216, 10}, + {208, 44}, + {130, 60} +}, {// LED Index to Flag + LED_FLAG_ALL, LED_FLAG_ALL, LED_FLAG_ALL, LED_FLAG_ALL, LED_FLAG_ALL, + LED_FLAG_ALL, LED_FLAG_ALL, LED_FLAG_ALL +}}; +// clang-format on +#endif + +#ifdef OLED_ENABLE +// OLED shared code +// The oled is vertical. Need to rotate 270 degrees. +__attribute__((weak)) oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_270; } + +// Render layer status on OLED. To be re-implemented by keymaps since layers are +// defined there. +__attribute__((weak)) void oled_render_layer(void) { return; } + +// Oneshot mods status +uint8_t osmods; + +__attribute__((weak)) void oled_render_mods(void) { + static const char PROGMEM ctrl[] = {0xb6, 0xb7, 10, 0xd6, 0xd7, 10, 0x20, 0x20, 10, 0}; + static const char PROGMEM shift[] = {0x87, 0x88, 0x89, 10, 0xa7, 0xa8, 0xa9, 10, 0xc7, 0xc8, 0xc9, 10, 0}; + static const char PROGMEM alt[] = {0x84, 0x85, 0x86, 10, 0xa4, 0xa5, 0xa6, 10, 0xc4, 0xc5, 0xc6, 10, 0}; + static const char PROGMEM ctrl_alt[] = {0xb6, 0xb7, 0x84, 0x85, 0x86, 0xd6, 0xd7, 0xa4, 0xa5, 0xa6, 0x20, 0x20, 0xc4, 0xc5, 0xc6, 0}; + + static const char PROGMEM ctrl_shift[] = {0xb6, 0xb7, 0x87, 0x88, 0x89, 0xd6, 0xd7, 0xa7, 0xa8, 0xa9, 0x20, 0x20, 0xc7, 0xc8, 0xc9, 0}; + static const char PROGMEM c_a_shift[] = {0xb6, 0xb7, 0x84, 0x85, 0x86, 0xd6, 0xd7, 0xa4, 0xa5, 0xa6, 0x20, 0x20, 0xc4, 0xc5, 0xc6, 0x87, 0x88, 0x89, 10, 0xa7, 0xa8, 0xa9, 10, 0xc7, 0xc8, 0xc9, 10, 0}; + // Now check mod status and render. + static uint8_t mods; + mods = get_mods() | osmods; + if ((mods & MOD_MASK_CTRL) && (mods & MOD_MASK_ALT) && (mods & MOD_MASK_SHIFT)) { + oled_write_P(c_a_shift, false); + } else if ((mods & MOD_MASK_CTRL) && (mods & MOD_MASK_ALT)) { + oled_write_P(ctrl_alt, false); + } else if ((mods & MOD_MASK_CTRL) && (mods & MOD_MASK_SHIFT)) { + oled_write_P(ctrl_shift, false); + } else if ((mods & MOD_MASK_SHIFT) && (mods & MOD_MASK_ALT)) { + oled_write_P(alt, false); + oled_write_P(shift, false); + } else if (mods & MOD_MASK_CTRL) { + oled_write_P(ctrl, false); + } else if (mods & MOD_MASK_ALT) { + oled_write_P(alt, false); + } else if (mods & MOD_MASK_SHIFT) { + oled_write_P(shift, false); + } else { + for (int i = 0; i < 6; ++i) { + oled_write_ln(" ", false); + } + } + return; +} + +void oneshot_mods_changed_user(uint8_t mods) { osmods = mods; } + +// Call this from "led_update_user" and use `led_state.caps_lock` to check +// the status of capslock. +__attribute__((weak)) void oled_render_capslock(bool caps_on) { + static const char PROGMEM capslock_logo[] = {0x9c, 0x9d, 0x9e, 0x9f, 10, 0xbc, 0xbd, 0xbe, 0xbf, 10, 0xdc, 0xdd, 0xde, 0xdf, 10, 0}; + if (caps_on) { + oled_write_P(capslock_logo, false); + } else { + for (int i = 0; i < 3; ++i) { + oled_write_ln(" ", false); + } + } +} + +char keylog_str[24] = {}; + +const char code_to_name[60] = {' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f', 'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p', 'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z', '1', '2', '3', '4', '5', '6', '7', '8', '9', '0', 'R', 'E', 'B', 'T', '_', '-', '=', '[', ']', '\\', '#', ';', '\'', '`', ',', '.', '/', ' ', ' ', ' '}; + +void set_keylog(uint16_t keycode, keyrecord_t *record) { + if ((keycode >= QK_MOD_TAP && keycode <= QK_MOD_TAP_MAX) || (keycode >= QK_LAYER_TAP && keycode <= QK_LAYER_TAP_MAX)) { + keycode = keycode & 0xFF; + } +} + +__attribute__((weak)) void oled_render_keylog(void) { oled_write(keylog_str, false); } + +// Keymaps can override this function +__attribute__((weak)) void oled_task_user(void) { + /* oled_render_keylog(); */ + oled_render_layer(); + oled_render_mods(); + led_t led_state = host_keyboard_led_state(); + oled_render_capslock(led_state.caps_lock); +} +#endif diff --git a/keyboards/yanghu/unicorne/unicorne.h b/keyboards/yanghu/unicorne/unicorne.h new file mode 100644 index 0000000000..f0b5685f1d --- /dev/null +++ b/keyboards/yanghu/unicorne/unicorne.h @@ -0,0 +1,50 @@ +/* Copyright 2021 Yang Hu + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +#ifdef OLED_ENABLE +void oled_render_capslock(bool caps_on); +void oled_render_mods(void); +void oled_render_keylog(void); +#endif +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ + +// clang-format off +#define LAYOUT_split_3x6_4( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \ + K30, K31, K32, K33, K34, K35, K36, K37 \ +) \ +{ \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B }, \ + { KC_NO, KC_NO, K30, K31, K32, K33, K34, K35, K36, K37, KC_NO, KC_NO} \ +} +// clang-format on + +#define LAYOUT LAYOUT_split_3x6_4 From 25c93bd9a390a7b9bad61b98424afcfad5d236bf Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Fri, 5 Nov 2021 15:28:12 +0000 Subject: [PATCH 433/595] Mechlovin Infinity88 Layout Extension (#15058) --- keyboards/mechlovin/infinity88/config.h | 3 - keyboards/mechlovin/infinity88/infinity88.h | 67 ++++++- keyboards/mechlovin/infinity88/info.json | 197 +++++++++++++++++++- 3 files changed, 255 insertions(+), 12 deletions(-) diff --git a/keyboards/mechlovin/infinity88/config.h b/keyboards/mechlovin/infinity88/config.h index a387b76386..edbb628e7b 100644 --- a/keyboards/mechlovin/infinity88/config.h +++ b/keyboards/mechlovin/infinity88/config.h @@ -69,6 +69,3 @@ along with this program. If not, see . // #define RGBLIGHT_EFFECT_STATIC_GRADIENT // #define RGBLIGHT_EFFECT_RGB_TEST // #define RGBLIGHT_EFFECT_ALTERNATING - -// generated by KBFirmware JSON to QMK Parser -// https://noroadsleft.github.io/kbf_qmk_converter/ \ No newline at end of file diff --git a/keyboards/mechlovin/infinity88/infinity88.h b/keyboards/mechlovin/infinity88/infinity88.h index 27f4e23073..d9e1122576 100644 --- a/keyboards/mechlovin/infinity88/infinity88.h +++ b/keyboards/mechlovin/infinity88/infinity88.h @@ -18,6 +18,28 @@ #include "quantum.h" +#define XXX KC_NO + +/* + * ┌───┐┌───┬───┬───┬───┐┌───┬───┬───┬───┐┌───┬───┬───┬───┐┌───┐ ┌───┬───┬───┐ + * │00 ││01 │02 │03 │04 ││05 │06 │07 │08 ││09 │0A │0B │0C ││3E │ │0E │0F │0G │ + * └───┘└───┴───┴───┴───┘└───┴───┴───┴───┘└───┴───┴───┴───┘└───┘ └───┴───┴───┘ + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ ┌───┬───┬───┐ ┌───────┐ + * │10 │11 │12 │13 │14 │15 │16 │17 │18 │19 │1A │1B │1C │1D │0D │ │1E │1F │1G │ │1D │ 2u Backspace + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤ ├───┼───┼───┤ └─┬─────┤ ┌─────┐ + * │20 │21 │22 │23 │24 │25 │26 │27 │28 │29 │2A │2B │2C │2D │ │2E │2F │2G │ │ │ │2D │ + * 2.25u ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬────┤ └───┴───┴───┘ ┌──┴┐3D │ ISO Enter ┌──┴─────┤ ANSI Enter + * LShift │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3A │3B │3C │3D │ │3C │ │ │3D │ + * ┌────────┐ ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┤ ┌───┐ ┌─┴───┴────┤ ┌─┴─┬──────┤ + * │40 │ │40 │41 │42 │43 │44 │45 │46 │47 │48 │49 │4A │4B │4C │4D │ │4F │ │4D │ 2.75u RShift │4C │4D │ 1u/1.75u + * └────────┘ ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬┴───┤ ┌───┼───┼───┐ └──────────┘ └───┴──────┘ + * │50 │51 │52 │56 │5A │5B │5C │5D │ │5E │5F │5G │ + * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ └───┴───┴───┘ + * ┌─────┬───┬─────┬───────────────────────────┬─────┬───┬─────┐ + * │50 │51 │52 │56 │5B │5C │5D │ Tsangan/WKL + * └─────┴───┴─────┴───────────────────────────┴─────┴───┴─────┘ + */ + #define LAYOUT_all( \ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K3E, K0E, K0F, K0G, \ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K0D, K1E, K1F, K1G, \ @@ -26,13 +48,42 @@ K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4F, \ K50, K51, K52, K56, K5A, K5B, K5C, K5D, K5E, K5F, K5G \ ) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G }, \ - { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, KC_NO, KC_NO }, \ - { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, KC_NO, K4F, KC_NO }, \ - { K50, K51, K52, KC_NO, KC_NO, KC_NO, K56, KC_NO, KC_NO, KC_NO, K5A, K5B, K5C, K5D, K5E, K5F, K5G }, \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, XXX, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, XXX, K4F, XXX }, \ + { K50, K51, K52, XXX, XXX, XXX, K56, XXX, XXX, XXX, K5A, K5B, K5C, K5D, K5E, K5F, K5G }, \ +} + +#define LAYOUT_tkl_ansi_f13( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K3E, K0E, K0F, K0G, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \ + K40, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4D, K4F, \ + K50, K51, K52, K56, K5A, K5B, K5C, K5D, K5E, K5F, K5G \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, XXX, K0E, K0F, K0G }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, K3D, K3E, XXX, XXX }, \ + { K40, XXX, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, XXX, K4D, XXX, K4F, XXX }, \ + { K50, K51, K52, XXX, XXX, XXX, K56, XXX, XXX, XXX, K5A, K5B, K5C, K5D, K5E, K5F, K5G }, \ } -// generated by KBFirmware JSON to QMK Parser -// https://noroadsleft.github.io/kbf_qmk_converter/ \ No newline at end of file +#define LAYOUT_tkl_iso_f13( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K3E, K0E, K0F, K0G, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2E, K2F, K2G, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ + K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4D, K4F, \ + K50, K51, K52, K56, K5A, K5B, K5C, K5D, K5E, K5F, K5G \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, XXX, K0E, K0F, K0G }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, XXX, K2E, K2F, K2G }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, XXX, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, XXX, K4D, XXX, K4F, XXX }, \ + { K50, K51, K52, XXX, XXX, XXX, K56, XXX, XXX, XXX, K5A, K5B, K5C, K5D, K5E, K5F, K5G }, \ +} diff --git a/keyboards/mechlovin/infinity88/info.json b/keyboards/mechlovin/infinity88/info.json index 1df539f02d..49aae61f76 100644 --- a/keyboards/mechlovin/infinity88/info.json +++ b/keyboards/mechlovin/infinity88/info.json @@ -1,7 +1,7 @@ { "keyboard_name": "infinity88", "url": "", - "maintainer": "Team Mechlovin", + "maintainer": "mechlovin", "layouts": { "LAYOUT_all": { "layout": [ @@ -86,6 +86,201 @@ {"label":"K4C (B4,D2)", "x":12.25, "y":4.25, "w":1.75}, {"label":"K4D (B4,D3)", "x":14, "y":4.25}, {"label":"K4F (B4,D5)", "x":16.25, "y":4.25}, + {"label":"K50 (B5,B6)", "x":0, "y":5.25, "w":1.25}, + {"label":"K51 (B5,F4)", "x":1.25, "y":5.25, "w":1.25}, + {"label":"K52 (B5,C0)", "x":2.5, "y":5.25, "w":1.25}, + {"label":"K56 (B5,C4)", "x":3.75, "y":5.25, "w":6.25}, + {"label":"K5A (B5,D0)", "x":10, "y":5.25, "w":1.25}, + {"label":"K5B (B5,D1)", "x":11.25, "y":5.25, "w":1.25}, + {"label":"K5C (B5,D2)", "x":12.5, "y":5.25, "w":1.25}, + {"label":"K5D (B5,D3)", "x":13.75, "y":5.25, "w":1.25}, + {"label":"K5E (B5,D4)", "x":15.25, "y":5.25}, + {"label":"K5F (B5,D5)", "x":16.25, "y":5.25}, + {"label":"K5G (B5,D6)", "x":17.25, "y":5.25} + ] + }, + "LAYOUT_tkl_ansi_f13": { + "layout": [ + {"label":"K00 (B0,B6)", "x":0, "y":0}, + {"label":"K01 (B0,F4)", "x":1.25, "y":0}, + {"label":"K02 (B0,C0)", "x":2.25, "y":0}, + {"label":"K03 (B0,C1)", "x":3.25, "y":0}, + {"label":"K04 (B0,C2)", "x":4.25, "y":0}, + {"label":"K05 (B0,C3)", "x":5.5, "y":0}, + {"label":"K06 (B0,C4)", "x":6.5, "y":0}, + {"label":"K07 (B0,C5)", "x":7.5, "y":0}, + {"label":"K08 (B0,C6)", "x":8.5, "y":0}, + {"label":"K09 (B0,C7)", "x":9.75, "y":0}, + {"label":"K0A (B0,D0)", "x":10.75, "y":0}, + {"label":"K0B (B0,D1)", "x":11.75, "y":0}, + {"label":"K0C (B0,D2)", "x":12.75, "y":0}, + {"label":"K3E (B3,D4)", "x":14, "y":0}, + {"label":"K0E (B0,D4)", "x":15.25, "y":0}, + {"label":"K0F (B0,D5)", "x":16.25, "y":0}, + {"label":"K0G (B0,D6)", "x":17.25, "y":0}, + + {"label":"K10 (B1,B6)", "x":0, "y":1.25}, + {"label":"K11 (B1,F4)", "x":1, "y":1.25}, + {"label":"K12 (B1,C0)", "x":2, "y":1.25}, + {"label":"K13 (B1,C1)", "x":3, "y":1.25}, + {"label":"K14 (B1,C2)", "x":4, "y":1.25}, + {"label":"K15 (B1,C3)", "x":5, "y":1.25}, + {"label":"K16 (B1,C4)", "x":6, "y":1.25}, + {"label":"K17 (B1,C5)", "x":7, "y":1.25}, + {"label":"K18 (B1,C6)", "x":8, "y":1.25}, + {"label":"K19 (B1,C7)", "x":9, "y":1.25}, + {"label":"K1A (B1,D0)", "x":10, "y":1.25}, + {"label":"K1B (B1,D1)", "x":11, "y":1.25}, + {"label":"K1C (B1,D2)", "x":12, "y":1.25}, + {"label":"K1D (B1,D3)", "x":13, "y":1.25, "w":2}, + {"label":"K1E (B1,D4)", "x":15.25, "y":1.25}, + {"label":"K1F (B1,D5)", "x":16.25, "y":1.25}, + {"label":"K1G (B1,D6)", "x":17.25, "y":1.25}, + + {"label":"K20 (B2,B6)", "x":0, "y":2.25, "w":1.5}, + {"label":"K21 (B2,F4)", "x":1.5, "y":2.25}, + {"label":"K22 (B2,C0)", "x":2.5, "y":2.25}, + {"label":"K23 (B2,C1)", "x":3.5, "y":2.25}, + {"label":"K24 (B2,C2)", "x":4.5, "y":2.25}, + {"label":"K25 (B2,C3)", "x":5.5, "y":2.25}, + {"label":"K26 (B2,C4)", "x":6.5, "y":2.25}, + {"label":"K27 (B2,C5)", "x":7.5, "y":2.25}, + {"label":"K28 (B2,C6)", "x":8.5, "y":2.25}, + {"label":"K29 (B2,C7)", "x":9.5, "y":2.25}, + {"label":"K2A (B2,D0)", "x":10.5, "y":2.25}, + {"label":"K2B (B2,D1)", "x":11.5, "y":2.25}, + {"label":"K2C (B2,D2)", "x":12.5, "y":2.25}, + {"label":"K2D (B2,D3)", "x":13.5, "y":2.25, "w":1.5}, + {"label":"K2E (B2,D4)", "x":15.25, "y":2.25}, + {"label":"K2F (B2,D5)", "x":16.25, "y":2.25}, + {"label":"K2G (B2,D6)", "x":17.25, "y":2.25}, + + {"label":"K30 (B3,B6)", "x":0, "y":3.25, "w":1.75}, + {"label":"K31 (B3,F4)", "x":1.75, "y":3.25}, + {"label":"K32 (B3,C0)", "x":2.75, "y":3.25}, + {"label":"K33 (B3,C1)", "x":3.75, "y":3.25}, + {"label":"K34 (B3,C2)", "x":4.75, "y":3.25}, + {"label":"K35 (B3,C3)", "x":5.75, "y":3.25}, + {"label":"K36 (B3,C4)", "x":6.75, "y":3.25}, + {"label":"K37 (B3,C5)", "x":7.75, "y":3.25}, + {"label":"K38 (B3,C6)", "x":8.75, "y":3.25}, + {"label":"K39 (B3,C7)", "x":9.75, "y":3.25}, + {"label":"K3A (B3,D0)", "x":10.75, "y":3.25}, + {"label":"K3B (B3,D1)", "x":11.75, "y":3.25}, + {"label":"K3D (B3,D3)", "x":12.75, "y":3.25, "w":2.25}, + + {"label":"K40 (B4,B6)", "x":0, "y":4.25, "w":2.25}, + {"label":"K42 (B4,C0)", "x":2.25, "y":4.25}, + {"label":"K43 (B4,C1)", "x":3.25, "y":4.25}, + {"label":"K44 (B4,C2)", "x":4.25, "y":4.25}, + {"label":"K45 (B4,C3)", "x":5.25, "y":4.25}, + {"label":"K46 (B4,C4)", "x":6.25, "y":4.25}, + {"label":"K47 (B4,C5)", "x":7.25, "y":4.25}, + {"label":"K48 (B4,C6)", "x":8.25, "y":4.25}, + {"label":"K49 (B4,C7)", "x":9.25, "y":4.25}, + {"label":"K4A (B4,D0)", "x":10.25, "y":4.25}, + {"label":"K4B (B4,D1)", "x":11.25, "y":4.25}, + {"label":"K4D (B4,D3)", "x":12.25, "y":4.25, "w":2.75}, + {"label":"K4F (B4,D5)", "x":16.25, "y":4.25}, + + {"label":"K50 (B5,B6)", "x":0, "y":5.25, "w":1.25}, + {"label":"K51 (B5,F4)", "x":1.25, "y":5.25, "w":1.25}, + {"label":"K52 (B5,C0)", "x":2.5, "y":5.25, "w":1.25}, + {"label":"K56 (B5,C4)", "x":3.75, "y":5.25, "w":6.25}, + {"label":"K5A (B5,D0)", "x":10, "y":5.25, "w":1.25}, + {"label":"K5B (B5,D1)", "x":11.25, "y":5.25, "w":1.25}, + {"label":"K5C (B5,D2)", "x":12.5, "y":5.25, "w":1.25}, + {"label":"K5D (B5,D3)", "x":13.75, "y":5.25, "w":1.25}, + {"label":"K5E (B5,D4)", "x":15.25, "y":5.25}, + {"label":"K5F (B5,D5)", "x":16.25, "y":5.25}, + {"label":"K5G (B5,D6)", "x":17.25, "y":5.25} + ] + }, + "LAYOUT_tkl_iso_f13": { + "layout": [ + {"label":"K00 (B0,B6)", "x":0, "y":0}, + {"label":"K01 (B0,F4)", "x":1.25, "y":0}, + {"label":"K02 (B0,C0)", "x":2.25, "y":0}, + {"label":"K03 (B0,C1)", "x":3.25, "y":0}, + {"label":"K04 (B0,C2)", "x":4.25, "y":0}, + {"label":"K05 (B0,C3)", "x":5.5, "y":0}, + {"label":"K06 (B0,C4)", "x":6.5, "y":0}, + {"label":"K07 (B0,C5)", "x":7.5, "y":0}, + {"label":"K08 (B0,C6)", "x":8.5, "y":0}, + {"label":"K09 (B0,C7)", "x":9.75, "y":0}, + {"label":"K0A (B0,D0)", "x":10.75, "y":0}, + {"label":"K0B (B0,D1)", "x":11.75, "y":0}, + {"label":"K0C (B0,D2)", "x":12.75, "y":0}, + {"label":"K3E (B3,D4)", "x":14, "y":0}, + {"label":"K0E (B0,D4)", "x":15.25, "y":0}, + {"label":"K0F (B0,D5)", "x":16.25, "y":0}, + {"label":"K0G (B0,D6)", "x":17.25, "y":0}, + + {"label":"K10 (B1,B6)", "x":0, "y":1.25}, + {"label":"K11 (B1,F4)", "x":1, "y":1.25}, + {"label":"K12 (B1,C0)", "x":2, "y":1.25}, + {"label":"K13 (B1,C1)", "x":3, "y":1.25}, + {"label":"K14 (B1,C2)", "x":4, "y":1.25}, + {"label":"K15 (B1,C3)", "x":5, "y":1.25}, + {"label":"K16 (B1,C4)", "x":6, "y":1.25}, + {"label":"K17 (B1,C5)", "x":7, "y":1.25}, + {"label":"K18 (B1,C6)", "x":8, "y":1.25}, + {"label":"K19 (B1,C7)", "x":9, "y":1.25}, + {"label":"K1A (B1,D0)", "x":10, "y":1.25}, + {"label":"K1B (B1,D1)", "x":11, "y":1.25}, + {"label":"K1C (B1,D2)", "x":12, "y":1.25}, + {"label":"K1D (B1,D3)", "x":13, "y":1.25, "w":2}, + {"label":"K1E (B1,D4)", "x":15.25, "y":1.25}, + {"label":"K1F (B1,D5)", "x":16.25, "y":1.25}, + {"label":"K1G (B1,D6)", "x":17.25, "y":1.25}, + + {"label":"K20 (B2,B6)", "x":0, "y":2.25, "w":1.5}, + {"label":"K21 (B2,F4)", "x":1.5, "y":2.25}, + {"label":"K22 (B2,C0)", "x":2.5, "y":2.25}, + {"label":"K23 (B2,C1)", "x":3.5, "y":2.25}, + {"label":"K24 (B2,C2)", "x":4.5, "y":2.25}, + {"label":"K25 (B2,C3)", "x":5.5, "y":2.25}, + {"label":"K26 (B2,C4)", "x":6.5, "y":2.25}, + {"label":"K27 (B2,C5)", "x":7.5, "y":2.25}, + {"label":"K28 (B2,C6)", "x":8.5, "y":2.25}, + {"label":"K29 (B2,C7)", "x":9.5, "y":2.25}, + {"label":"K2A (B2,D0)", "x":10.5, "y":2.25}, + {"label":"K2B (B2,D1)", "x":11.5, "y":2.25}, + {"label":"K2C (B2,D2)", "x":12.5, "y":2.25}, + {"label":"K2E (B2,D4)", "x":15.25, "y":2.25}, + {"label":"K2F (B2,D5)", "x":16.25, "y":2.25}, + {"label":"K2G (B2,D6)", "x":17.25, "y":2.25}, + + {"label":"K30 (B3,B6)", "x":0, "y":3.25, "w":1.75}, + {"label":"K31 (B3,F4)", "x":1.75, "y":3.25}, + {"label":"K32 (B3,C0)", "x":2.75, "y":3.25}, + {"label":"K33 (B3,C1)", "x":3.75, "y":3.25}, + {"label":"K34 (B3,C2)", "x":4.75, "y":3.25}, + {"label":"K35 (B3,C3)", "x":5.75, "y":3.25}, + {"label":"K36 (B3,C4)", "x":6.75, "y":3.25}, + {"label":"K37 (B3,C5)", "x":7.75, "y":3.25}, + {"label":"K38 (B3,C6)", "x":8.75, "y":3.25}, + {"label":"K39 (B3,C7)", "x":9.75, "y":3.25}, + {"label":"K3A (B3,D0)", "x":10.75, "y":3.25}, + {"label":"K3B (B3,D1)", "x":11.75, "y":3.25}, + {"label":"K3C (B3,D2)", "x":12.75, "y":3.25}, + {"label":"K3D (B3,D3)", "x":13.75, "y":2.25, "w":1.25, "h":2}, + + {"label":"K40 (B4,B6)", "x":0, "y":4.25, "w":1.25}, + {"label":"K41 (B4,F4)", "x":1.25, "y":4.25}, + {"label":"K42 (B4,C0)", "x":2.25, "y":4.25}, + {"label":"K43 (B4,C1)", "x":3.25, "y":4.25}, + {"label":"K44 (B4,C2)", "x":4.25, "y":4.25}, + {"label":"K45 (B4,C3)", "x":5.25, "y":4.25}, + {"label":"K46 (B4,C4)", "x":6.25, "y":4.25}, + {"label":"K47 (B4,C5)", "x":7.25, "y":4.25}, + {"label":"K48 (B4,C6)", "x":8.25, "y":4.25}, + {"label":"K49 (B4,C7)", "x":9.25, "y":4.25}, + {"label":"K4A (B4,D0)", "x":10.25, "y":4.25}, + {"label":"K4B (B4,D1)", "x":11.25, "y":4.25}, + {"label":"K4D (B4,D3)", "x":12.25, "y":4.25, "w":2.75}, + {"label":"K4F (B4,D5)", "x":16.25, "y":4.25}, + {"label":"K50 (B5,B6)", "x":0, "y":5.25, "w":1.25}, {"label":"K51 (B5,F4)", "x":1.25, "y":5.25, "w":1.25}, {"label":"K52 (B5,C0)", "x":2.5, "y":5.25, "w":1.25}, From 74b3f76bf52a567b89c520adb3ecd58addd65d83 Mon Sep 17 00:00:00 2001 From: Albert Y <76888457+filterpaper@users.noreply.github.com> Date: Sat, 6 Nov 2021 00:00:34 +0800 Subject: [PATCH 434/595] Improve handedness documentation for Architeuthis Dux (#15051) Co-authored-by: filterpaper --- keyboards/a_dux/readme.md | 27 +++++++++++++++++---------- 1 file changed, 17 insertions(+), 10 deletions(-) diff --git a/keyboards/a_dux/readme.md b/keyboards/a_dux/readme.md index aaf678ec74..ae06fa9faa 100644 --- a/keyboards/a_dux/readme.md +++ b/keyboards/a_dux/readme.md @@ -8,7 +8,7 @@ AKA A. dux, A.D., "Giant squid" Thank you [Perce](https://madebyperce.com/) for the logo. -## Cases can be found here: +## Case Options * [Flat Case](https://github.com/madebyperce/aduxcase) * [Tented Case](https://github.com/jdart/adux-tent) @@ -16,23 +16,30 @@ Thank you [Perce](https://madebyperce.com/) for the logo. ## Keyboard Info -* Keyboard Maintainer: [tapioki](https://github.com/tapioki) +* Keyboard Maintainer: [@tapioki](https://github.com/tapioki) * Hardware Supported: Architeuthis Dux -* Hardware Availability: [GitHub](https://github.com/tapioki/cephalopoda/tree/main/Architeuthis%20dux) +* Hardware Availability: Order PCBs with gerber files from the [repository](https://github.com/tapioki/cephalopoda/tree/main/Architeuthis%20dux) -Make examples for this keyboard (after setting up your build environment): +Make example for this keyboard (after setting up your build environment): make a_dux:default - make a_dux:default:avrdude-split-left - make a_dux:default:avrdude-split-right +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Setting Handedness + +Keyboard uses [handedness by EEPROM](https://docs.qmk.fm/#/feature_split_keyboard?id=handedness-by-eeprom) as default. The make commands are: + + make a_dux:default:dfu-split-left + make a_dux:default:dfu-split-right + +[QMK Toolbox](http://qmk.fm/toolbox) can also be used to set EEPROM handedness. Place the controller in bootloader mode and select menu option Tools -> EEPROM -> Set Left/Right Hand ## Bootloader Enter the bootloader in 3 ways: -* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard. (With `EE_HANDS` configured, hold down the top right key on the right half to place the right controller in bootloader mode) -* **Physical reset**: Briefly short the RST and GND pins on the microcontroller using tweezers, a paperclip, or any other conductive material. -* **Keycode in layout**: Press the key mapped to `RESET` if it is available +* **Bootmagic reset**: Hold down the top left key on the left half (or the top right right key on the right half) and plug in the controller on that side. +* **Physical reset pins**: Briefly short the RST and GND pins on the microcontroller using tweezers, a paperclip, or any other conductive material. +* **Keycode in layout**: Press the key mapped to `RESET` if it is configured. -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). From a2d2c5bc694fa8627312d4f83d8e240133649c34 Mon Sep 17 00:00:00 2001 From: Albert Y <76888457+filterpaper@users.noreply.github.com> Date: Sat, 6 Nov 2021 00:00:44 +0800 Subject: [PATCH 435/595] Add toolbox handedness instructions for Cradio (#15046) Co-authored-by: filterpaper --- keyboards/cradio/readme.md | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-) diff --git a/keyboards/cradio/readme.md b/keyboards/cradio/readme.md index b8520a366b..73d825aa5d 100644 --- a/keyboards/cradio/readme.md +++ b/keyboards/cradio/readme.md @@ -8,21 +8,25 @@ Cradio are low-profile 34-key split-keyboards designed by [@davidphilipbarr](htt * Keyboard Maintainer: [davidphilipbarr](https://github.com/davidphilipbarr) * Hardware Supported: - * [Sweep](https://github.com/davidphilipbarr/Sweep) + * [Sweep](https://github.com/davidphilipbarr/Sweep) (all versions) * [Hypergarlic](https://github.com/davidphilipbarr/hypergolic/tree/main/hypergarlic) * Variants of the same 34-key direct pin PCB -* Hardware Availability: PCBs can be printed with gerber files from the repository +* Hardware Availability: order PCBs with gerber files from the repository -Make examples for this keyboard (after setting up your build environment): +Make example for this keyboard (after setting up your build environment): make cradio:default -Firmware uses `EE_HANDS` split handedness by default. Each halve should be flashed once with the following: +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Setting Handedness + +Keyboard uses [handedness by EEPROM](https://docs.qmk.fm/#/feature_split_keyboard?id=handedness-by-eeprom) as default. The make commands are: make cradio:default:dfu-split-left make cradio:default:dfu-split-right -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). +[QMK Toolbox](http://qmk.fm/toolbox) can also be used to set EEPROM handedness. Place the controller in bootloader mode and select menu option Tools -> EEPROM -> Set Left/Right Hand ## Bootloader From c1edd0e10e8dc87cfa24ad5e9d9219a7f9aab0c0 Mon Sep 17 00:00:00 2001 From: Albert Y <76888457+filterpaper@users.noreply.github.com> Date: Sat, 6 Nov 2021 00:01:31 +0800 Subject: [PATCH 436/595] Improve Sweep keyboard readme documentation (#15038) Co-authored-by: filterpaper --- keyboards/ferris/sweep/readme.md | 23 ++++++++++++++++++----- 1 file changed, 18 insertions(+), 5 deletions(-) diff --git a/keyboards/ferris/sweep/readme.md b/keyboards/ferris/sweep/readme.md index f06cfbf266..a8cbf8fd80 100644 --- a/keyboards/ferris/sweep/readme.md +++ b/keyboards/ferris/sweep/readme.md @@ -5,20 +5,33 @@ A version of the Ferris keyboard that uses a daughterboard, designed by the fantastic @davidphilipbarr with some input from @pierrechevalier83 for the copper pad. All PCB files are available on the [project's github page](https://github.com/davidphilipbarr/Sweep) +## Keyboard Info + * Keyboard Maintainer: [Pierre Chevalier](https://github.com/pierrechevalier83) * Hardware Supported: * Ferris sweep (With pro-micro. Comes in a couple of PCB edge cuts shapes, but with identical pinout) * Hardware Availability: @iamnotyourbroom in the 40% discord chat server may have some spares for you. -Initial [EE_HANDS](https://docs.qmk.fm/#/feature_split_keyboard?id=handedness-by-eeprom) make examples for this keyboard (after setting up your build environment): +Make example for this keyboard (after setting up your build environment): + + make ferris/sweep:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Setting Handedness + +Keyboard uses [handedness by EEPROM](https://docs.qmk.fm/#/feature_split_keyboard?id=handedness-by-eeprom) as default. The make commands are: make ferris/sweep:default:avrdude-split-left make ferris/sweep:default:avrdude-split-right -Subsequent make example for both sides: +[QMK Toolbox](http://qmk.fm/toolbox) can also be used to set EEPROM handedness. Place the controller in bootloader mode and select menu option Tools -> EEPROM -> Set Left/Right Hand - make ferris/sweep:default +## Bootloader -[Bootmagic lite](https://docs.qmk.fm/#/feature_bootmagic?id=bootmagic-lite) is also configured on the top right key for the right halve. +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the top left key on the left half (or the top right right key on the right half) and plug in the controller on that side. +* **Physical reset button**: Briefly press the reset button soldered on the PCB. +* **Keycode in layout**: Press the key mapped to `RESET` if it is configured. -See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). From 5bb5bb1e28ccf764867a0f8d59e0df5a36925865 Mon Sep 17 00:00:00 2001 From: uqs Date: Fri, 5 Nov 2021 17:21:43 +0100 Subject: [PATCH 437/595] Fix parallel builds w/ LTO on systems where make is not GNU make. (#13955) --- tmk_core/rules.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tmk_core/rules.mk b/tmk_core/rules.mk index b17f85d375..70ab0eb166 100644 --- a/tmk_core/rules.mk +++ b/tmk_core/rules.mk @@ -359,7 +359,7 @@ BEGIN = gccversion sizebefore # Note the obj.txt depeendency is there to force linking if a source file is deleted %.elf: $(OBJ) $(MASTER_OUTPUT)/cflags.txt $(MASTER_OUTPUT)/ldflags.txt $(MASTER_OUTPUT)/obj.txt | $(BEGIN) @$(SILENT) || printf "$(MSG_LINKING) $@" | $(AWK_CMD) - $(eval CMD=$(CC) $(ALL_CFLAGS) $(filter-out %.txt,$^) --output $@ $(LDFLAGS)) + $(eval CMD=MAKE=$(MAKE) $(CC) $(ALL_CFLAGS) $(filter-out %.txt,$^) --output $@ $(LDFLAGS)) @$(BUILD_CMD) From 991235cd787f4295c6e537c18f6a02e6fa2801c6 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Fri, 5 Nov 2021 17:36:41 +0000 Subject: [PATCH 438/595] Superuser EXT Layout Macro Refactor (#15043) * fix info.json macro reference * rename LAYOUT_tkl to LAYOUT_all * use K notation in ext.h * add matrix diagram to ext.h * friendly-format info.json * add LAYOUT_ansi * add LAYOUT_ansi_split_bs_rshift * add LAYOUT_iso * add LAYOUT_iso_split_bs_rshift * correct keyboard maintainer values --- keyboards/superuser/ext/ext.h | 94 +++- keyboards/superuser/ext/info.json | 455 +++++++++++++++++- .../superuser/ext/keymaps/default/keymap.c | 4 +- keyboards/superuser/ext/keymaps/via/keymap.c | 8 +- keyboards/superuser/ext/readme.md | 2 +- 5 files changed, 542 insertions(+), 21 deletions(-) diff --git a/keyboards/superuser/ext/ext.h b/keyboards/superuser/ext/ext.h index f83b5bed19..3bed0782d2 100644 --- a/keyboards/superuser/ext/ext.h +++ b/keyboards/superuser/ext/ext.h @@ -17,16 +17,88 @@ #include "quantum.h" -#define LAYOUT_tkl(\ - KF10, KF11, K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K312, K114, K115, K116, \ - KF20, KF21, K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, \ - KF30, KF31, K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, \ - KF40, KF41, K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K415, \ - KF50, KF51, K500, K501, K502, K506, K511, K512, K513, K514, K515, K516 \ +#define ___ KC_NO + +/* + * ┌───┬───┐┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐┌───┬───┬───┐ ┌───────┐ + * │00 │01 ││02 │03 │04 │05 │06 │07 │08 │09 │0A │0B │0C │0D │0E │0F │2E ││0G │0H │0I │ │0F │ 2u Backspace + * ├───┼───┤├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤├───┼───┼───┤ └─┬─────┤ + * │10 │11 ││12 │13 │14 │15 │16 │17 │18 │19 │1A │1B │1C │1D │1E │1F ││1G │1H │1I │ │ │ + * 2.25u ├───┼───┤├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤└───┴───┴───┘ ┌──┴┐2F │ ISO Enter + * LShift │20 │21 ││22 │23 │24 │25 │26 │27 │28 │29 │2A │2B │2C │2D │2F │ │1F │ │ + * ┌────────┐ ├───┼───┤├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤ ┌───┐ ┌─┴───┴────┤ + * │32 │ │30 │31 ││32 │33 │34 │35 │36 │37 │38 │39 │3A │3B │3C │3D │3E │3F │ │3H │ │3E │ 2.75u RShift + * └────────┘ ├───┼───┤├────┴┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴───┴──┬┴───┴┬───┬─┴───┤┌───┼───┼───┐ └──────────┘ + * │40 │41 ││42 │43 │44 │48 │4D │4E │4F ││4G │4H │4I │ + * └───┴───┘└─────┴───┴─────┴───────────────────────────┴─────┴───┴─────┘└───┴───┴───┘ + */ + +#define LAYOUT_all(\ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K2E, K0G, K0H, K0I, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2F, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, K3F, K3H, \ + K40, K41, K42, K43, K44, K48, K4D, K4E, K4F, K4G, K4H, K4I \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, K0H, K0I }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, ___, ___, ___ }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, K3F, ___, K3H, ___ }, \ + { K40, K41, K42, K43, K44, ___, ___, ___, K48, ___, ___, ___, ___, K4D, K4E, K4F, K4G, K4H, K4I } \ +} + +#define LAYOUT_ansi(\ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, K0H, K0I, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2F, \ + K30, K31, K32, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, K3H, \ + K40, K41, K42, K43, K44, K48, K4D, K4E, K4F, K4G, K4H, K4I \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, K0H, K0I }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, ___, K2F, ___, ___, ___ }, \ + { K30, K31, K32, ___, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, ___, ___, K3H, ___ }, \ + { K40, K41, K42, K43, K44, ___, ___, ___, K48, ___, ___, ___, ___, K4D, K4E, K4F, K4G, K4H, K4I } \ +} + +#define LAYOUT_ansi_split_bs_rshift(\ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K2E, K0G, K0H, K0I, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2F, \ + K30, K31, K32, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, K3F, K3H, \ + K40, K41, K42, K43, K44, K48, K4D, K4E, K4F, K4G, K4H, K4I \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, K0H, K0I }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, ___, ___, ___ }, \ + { K30, K31, K32, ___, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, K3F, ___, K3H, ___ }, \ + { K40, K41, K42, K43, K44, ___, ___, ___, K48, ___, ___, ___, ___, K4D, K4E, K4F, K4G, K4H, K4I } \ +} + +#define LAYOUT_iso(\ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, K0H, K0I, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1G, K1H, K1I, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K1F, K2F, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, K3H, \ + K40, K41, K42, K43, K44, K48, K4D, K4E, K4F, K4G, K4H, K4I \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, K0H, K0I }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, ___, K2F, ___, ___, ___ }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, ___, ___, K3H, ___ }, \ + { K40, K41, K42, K43, K44, ___, ___, ___, K48, ___, ___, ___, ___, K4D, K4E, K4F, K4G, K4H, K4I } \ +} + +#define LAYOUT_iso_split_bs_rshift(\ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K2E, K0G, K0H, K0I, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1G, K1H, K1I, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K1F, K2F, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, K3F, K3H, \ + K40, K41, K42, K43, K44, K48, K4D, K4E, K4F, K4G, K4H, K4I \ ) { \ - { KF10, KF11, K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116 }, \ - { KF20, KF21, K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216 }, \ - { KF30, KF31, K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, KC_NO, KC_NO, KC_NO }, \ - { KF40, KF41, K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, KC_NO, K415, KC_NO }, \ - { KF50, KF51, K500, K501, K502, KC_NO, KC_NO, KC_NO, K506, KC_NO, KC_NO, KC_NO, KC_NO, K511, K512, K513, K514, K515, K516 } \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, K0H, K0I }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, ___, ___, ___ }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, K3F, ___, K3H, ___ }, \ + { K40, K41, K42, K43, K44, ___, ___, ___, K48, ___, ___, ___, ___, K4D, K4E, K4F, K4G, K4H, K4I } \ } diff --git a/keyboards/superuser/ext/info.json b/keyboards/superuser/ext/info.json index 272df98a9a..c19fc3a913 100644 --- a/keyboards/superuser/ext/info.json +++ b/keyboards/superuser/ext/info.json @@ -1,10 +1,459 @@ { "keyboard_name": "ext", "url": "", - "maintainer": "superuser", + "maintainer": "kaylanm", + "layout_aliases": { + "LAYOUT_tkl": "LAYOUT_all" + }, "layouts": { - "LAYOUT": { - "layout": [{"label":"F1", "x":0, "y":0}, {"label":"F2", "x":1, "y":0}, {"label":"~", "x":2.25, "y":0}, {"label":"!", "x":3.25, "y":0}, {"label":"@", "x":4.25, "y":0}, {"label":"#", "x":5.25, "y":0}, {"label":"$", "x":6.25, "y":0}, {"label":"%", "x":7.25, "y":0}, {"label":"^", "x":8.25, "y":0}, {"label":"&", "x":9.25, "y":0}, {"label":"*", "x":10.25, "y":0}, {"label":"(", "x":11.25, "y":0}, {"label":")", "x":12.25, "y":0}, {"label":"_", "x":13.25, "y":0}, {"label":"+", "x":14.25, "y":0}, {"label":"Bksp", "x":15.25, "y":0}, {"label":"Bksp", "x":16.25, "y":0}, {"label":"Insert", "x":17.5, "y":0}, {"label":"Home", "x":18.5, "y":0}, {"label":"PgUp", "x":19.5, "y":0}, {"label":"F3", "x":0, "y":1}, {"label":"F4", "x":1, "y":1}, {"label":"Tab", "x":2.25, "y":1, "w":1.5}, {"label":"Q", "x":3.75, "y":1}, {"label":"W", "x":4.75, "y":1}, {"label":"E", "x":5.75, "y":1}, {"label":"R", "x":6.75, "y":1}, {"label":"T", "x":7.75, "y":1}, {"label":"Y", "x":8.75, "y":1}, {"label":"U", "x":9.75, "y":1}, {"label":"I", "x":10.75, "y":1}, {"label":"O", "x":11.75, "y":1}, {"label":"P", "x":12.75, "y":1}, {"label":"{", "x":13.75, "y":1}, {"label":"}", "x":14.75, "y":1}, {"label":"|", "x":15.75, "y":1, "w":1.5}, {"label":"Delete", "x":17.5, "y":1}, {"label":"End", "x":18.5, "y":1}, {"label":"PgDn", "x":19.5, "y":1}, {"label":"F5", "x":0, "y":2}, {"label":"F6", "x":1, "y":2}, {"label":"Caps Lock", "x":2.25, "y":2, "w":1.75}, {"label":"A", "x":4, "y":2}, {"label":"S", "x":5, "y":2}, {"label":"D", "x":6, "y":2}, {"label":"F", "x":7, "y":2}, {"label":"G", "x":8, "y":2}, {"label":"H", "x":9, "y":2}, {"label":"J", "x":10, "y":2}, {"label":"K", "x":11, "y":2}, {"label":"L", "x":12, "y":2}, {"label":":", "x":13, "y":2}, {"label":"\"", "x":14, "y":2}, {"label":"Enter", "x":15, "y":2, "w":2.25}, {"label":"F7", "x":0, "y":3}, {"label":"F8", "x":1, "y":3}, {"label":"Shift", "x":2.25, "y":3, "w":1.25}, {"label":"|", "x":3.5, "y":3}, {"label":"Z", "x":4.5, "y":3}, {"label":"X", "x":5.5, "y":3}, {"label":"C", "x":6.5, "y":3}, {"label":"V", "x":7.5, "y":3}, {"label":"B", "x":8.5, "y":3}, {"label":"N", "x":9.5, "y":3}, {"label":"M", "x":10.5, "y":3}, {"label":"<", "x":11.5, "y":3}, {"label":">", "x":12.5, "y":3}, {"label":"?", "x":13.5, "y":3}, {"label":"Shift", "x":14.5, "y":3, "w":1.75}, {"label":"Fn", "x":16.25, "y":3}, {"label":"\u2191", "x":18.5, "y":3}, {"label":"F9", "x":0, "y":4}, {"label":"F10", "x":1, "y":4}, {"label":"Ctrl", "x":2.25, "y":4, "w":1.5}, {"label":"Win", "x":3.75, "y":4}, {"label":"Alt", "x":4.75, "y":4, "w":1.5}, {"x":6.25, "y":4, "w":7}, {"label":"Alt", "x":13.25, "y":4, "w":1.5}, {"label":"Win", "x":14.75, "y":4}, {"label":"Ctrl", "x":15.75, "y":4, "w":1.5}, {"label":"\u2190", "x":17.5, "y":4}, {"label":"\u2193", "x":18.5, "y":4}, {"label":"\u2192", "x":19.5, "y":4}] + "LAYOUT_all": { + "layout": [ + {"label":"F1", "x":0, "y":0}, + {"label":"F2", "x":1, "y":0}, + {"label":"`~", "x":2.25, "y":0}, + {"label":"1!", "x":3.25, "y":0}, + {"label":"2@", "x":4.25, "y":0}, + {"label":"3#", "x":5.25, "y":0}, + {"label":"4$", "x":6.25, "y":0}, + {"label":"5%", "x":7.25, "y":0}, + {"label":"6^", "x":8.25, "y":0}, + {"label":"7&", "x":9.25, "y":0}, + {"label":"8*", "x":10.25, "y":0}, + {"label":"9(", "x":11.25, "y":0}, + {"label":"0)", "x":12.25, "y":0}, + {"label":"-_", "x":13.25, "y":0}, + {"label":"=+", "x":14.25, "y":0}, + {"label":"Bksp", "x":15.25, "y":0}, + {"label":"Bksp", "x":16.25, "y":0}, + {"label":"Insert", "x":17.5, "y":0}, + {"label":"Home", "x":18.5, "y":0}, + {"label":"PgUp", "x":19.5, "y":0}, + + {"label":"F3", "x":0, "y":1}, + {"label":"F4", "x":1, "y":1}, + {"label":"Tab", "x":2.25, "y":1, "w":1.5}, + {"label":"Q", "x":3.75, "y":1}, + {"label":"W", "x":4.75, "y":1}, + {"label":"E", "x":5.75, "y":1}, + {"label":"R", "x":6.75, "y":1}, + {"label":"T", "x":7.75, "y":1}, + {"label":"Y", "x":8.75, "y":1}, + {"label":"U", "x":9.75, "y":1}, + {"label":"I", "x":10.75, "y":1}, + {"label":"O", "x":11.75, "y":1}, + {"label":"P", "x":12.75, "y":1}, + {"label":"[{", "x":13.75, "y":1}, + {"label":"]}", "x":14.75, "y":1}, + {"label":"\\|", "x":15.75, "y":1, "w":1.5}, + {"label":"Delete", "x":17.5, "y":1}, + {"label":"End", "x":18.5, "y":1}, + {"label":"PgDn", "x":19.5, "y":1}, + + {"label":"F5", "x":0, "y":2}, + {"label":"F6", "x":1, "y":2}, + {"label":"Caps Lock", "x":2.25, "y":2, "w":1.75}, + {"label":"A", "x":4, "y":2}, + {"label":"S", "x":5, "y":2}, + {"label":"D", "x":6, "y":2}, + {"label":"F", "x":7, "y":2}, + {"label":"G", "x":8, "y":2}, + {"label":"H", "x":9, "y":2}, + {"label":"J", "x":10, "y":2}, + {"label":"K", "x":11, "y":2}, + {"label":"L", "x":12, "y":2}, + {"label":";:", "x":13, "y":2}, + {"label":"'\"", "x":14, "y":2}, + {"label":"Enter", "x":15, "y":2, "w":2.25}, + + {"label":"F7", "x":0, "y":3}, + {"label":"F8", "x":1, "y":3}, + {"label":"Shift", "x":2.25, "y":3, "w":1.25}, + {"label":"\\|", "x":3.5, "y":3}, + {"label":"Z", "x":4.5, "y":3}, + {"label":"X", "x":5.5, "y":3}, + {"label":"C", "x":6.5, "y":3}, + {"label":"V", "x":7.5, "y":3}, + {"label":"B", "x":8.5, "y":3}, + {"label":"N", "x":9.5, "y":3}, + {"label":"M", "x":10.5, "y":3}, + {"label":",<", "x":11.5, "y":3}, + {"label":".>", "x":12.5, "y":3}, + {"label":"/?", "x":13.5, "y":3}, + {"label":"Shift", "x":14.5, "y":3, "w":1.75}, + {"label":"Fn", "x":16.25, "y":3}, + {"label":"\u2191", "x":18.5, "y":3}, + + {"label":"F9", "x":0, "y":4}, + {"label":"F10", "x":1, "y":4}, + {"label":"Ctrl", "x":2.25, "y":4, "w":1.5}, + {"label":"Win", "x":3.75, "y":4}, + {"label":"Alt", "x":4.75, "y":4, "w":1.5}, + {"label":"Space", "x":6.25, "y":4, "w":7}, + {"label":"Alt", "x":13.25, "y":4, "w":1.5}, + {"label":"Win", "x":14.75, "y":4}, + {"label":"Ctrl", "x":15.75, "y":4, "w":1.5}, + {"label":"\u2190", "x":17.5, "y":4}, + {"label":"\u2193", "x":18.5, "y":4}, + {"label":"\u2192", "x":19.5, "y":4} + ] + }, + "LAYOUT_ansi": { + "layout": [ + {"label":"F1", "x":0, "y":0}, + {"label":"F2", "x":1, "y":0}, + {"label":"`~", "x":2.25, "y":0}, + {"label":"1!", "x":3.25, "y":0}, + {"label":"2@", "x":4.25, "y":0}, + {"label":"3#", "x":5.25, "y":0}, + {"label":"4$", "x":6.25, "y":0}, + {"label":"5%", "x":7.25, "y":0}, + {"label":"6^", "x":8.25, "y":0}, + {"label":"7&", "x":9.25, "y":0}, + {"label":"8*", "x":10.25, "y":0}, + {"label":"9(", "x":11.25, "y":0}, + {"label":"0)", "x":12.25, "y":0}, + {"label":"-_", "x":13.25, "y":0}, + {"label":"=+", "x":14.25, "y":0}, + {"label":"Bksp", "x":15.25, "y":0, "w":2}, + {"label":"Insert", "x":17.5, "y":0}, + {"label":"Home", "x":18.5, "y":0}, + {"label":"PgUp", "x":19.5, "y":0}, + + {"label":"F3", "x":0, "y":1}, + {"label":"F4", "x":1, "y":1}, + {"label":"Tab", "x":2.25, "y":1, "w":1.5}, + {"label":"Q", "x":3.75, "y":1}, + {"label":"W", "x":4.75, "y":1}, + {"label":"E", "x":5.75, "y":1}, + {"label":"R", "x":6.75, "y":1}, + {"label":"T", "x":7.75, "y":1}, + {"label":"Y", "x":8.75, "y":1}, + {"label":"U", "x":9.75, "y":1}, + {"label":"I", "x":10.75, "y":1}, + {"label":"O", "x":11.75, "y":1}, + {"label":"P", "x":12.75, "y":1}, + {"label":"[{", "x":13.75, "y":1}, + {"label":"]}", "x":14.75, "y":1}, + {"label":"\\|", "x":15.75, "y":1, "w":1.5}, + {"label":"Delete", "x":17.5, "y":1}, + {"label":"End", "x":18.5, "y":1}, + {"label":"PgDn", "x":19.5, "y":1}, + + {"label":"F5", "x":0, "y":2}, + {"label":"F6", "x":1, "y":2}, + {"label":"Caps Lock", "x":2.25, "y":2, "w":1.75}, + {"label":"A", "x":4, "y":2}, + {"label":"S", "x":5, "y":2}, + {"label":"D", "x":6, "y":2}, + {"label":"F", "x":7, "y":2}, + {"label":"G", "x":8, "y":2}, + {"label":"H", "x":9, "y":2}, + {"label":"J", "x":10, "y":2}, + {"label":"K", "x":11, "y":2}, + {"label":"L", "x":12, "y":2}, + {"label":";:", "x":13, "y":2}, + {"label":"'\"", "x":14, "y":2}, + {"label":"Enter", "x":15, "y":2, "w":2.25}, + + {"label":"F7", "x":0, "y":3}, + {"label":"F8", "x":1, "y":3}, + {"label":"Shift", "x":2.25, "y":3, "w":2.25}, + {"label":"Z", "x":4.5, "y":3}, + {"label":"X", "x":5.5, "y":3}, + {"label":"C", "x":6.5, "y":3}, + {"label":"V", "x":7.5, "y":3}, + {"label":"B", "x":8.5, "y":3}, + {"label":"N", "x":9.5, "y":3}, + {"label":"M", "x":10.5, "y":3}, + {"label":",<", "x":11.5, "y":3}, + {"label":".>", "x":12.5, "y":3}, + {"label":"/?", "x":13.5, "y":3}, + {"label":"Shift", "x":14.5, "y":3, "w":2.75}, + {"label":"\u2191", "x":18.5, "y":3}, + + {"label":"F9", "x":0, "y":4}, + {"label":"F10", "x":1, "y":4}, + {"label":"Ctrl", "x":2.25, "y":4, "w":1.5}, + {"label":"Win", "x":3.75, "y":4}, + {"label":"Alt", "x":4.75, "y":4, "w":1.5}, + {"label":"Space", "x":6.25, "y":4, "w":7}, + {"label":"Alt", "x":13.25, "y":4, "w":1.5}, + {"label":"Win", "x":14.75, "y":4}, + {"label":"Ctrl", "x":15.75, "y":4, "w":1.5}, + {"label":"\u2190", "x":17.5, "y":4}, + {"label":"\u2193", "x":18.5, "y":4}, + {"label":"\u2192", "x":19.5, "y":4} + ] + }, + "LAYOUT_ansi_split_bs_rshift": { + "layout": [ + {"label":"F1", "x":0, "y":0}, + {"label":"F2", "x":1, "y":0}, + {"label":"`~", "x":2.25, "y":0}, + {"label":"1!", "x":3.25, "y":0}, + {"label":"2@", "x":4.25, "y":0}, + {"label":"3#", "x":5.25, "y":0}, + {"label":"4$", "x":6.25, "y":0}, + {"label":"5%", "x":7.25, "y":0}, + {"label":"6^", "x":8.25, "y":0}, + {"label":"7&", "x":9.25, "y":0}, + {"label":"8*", "x":10.25, "y":0}, + {"label":"9(", "x":11.25, "y":0}, + {"label":"0)", "x":12.25, "y":0}, + {"label":"-_", "x":13.25, "y":0}, + {"label":"=+", "x":14.25, "y":0}, + {"label":"Bksp", "x":15.25, "y":0}, + {"label":"Bksp", "x":16.25, "y":0}, + {"label":"Insert", "x":17.5, "y":0}, + {"label":"Home", "x":18.5, "y":0}, + {"label":"PgUp", "x":19.5, "y":0}, + + {"label":"F3", "x":0, "y":1}, + {"label":"F4", "x":1, "y":1}, + {"label":"Tab", "x":2.25, "y":1, "w":1.5}, + {"label":"Q", "x":3.75, "y":1}, + {"label":"W", "x":4.75, "y":1}, + {"label":"E", "x":5.75, "y":1}, + {"label":"R", "x":6.75, "y":1}, + {"label":"T", "x":7.75, "y":1}, + {"label":"Y", "x":8.75, "y":1}, + {"label":"U", "x":9.75, "y":1}, + {"label":"I", "x":10.75, "y":1}, + {"label":"O", "x":11.75, "y":1}, + {"label":"P", "x":12.75, "y":1}, + {"label":"[{", "x":13.75, "y":1}, + {"label":"]}", "x":14.75, "y":1}, + {"label":"\\|", "x":15.75, "y":1, "w":1.5}, + {"label":"Delete", "x":17.5, "y":1}, + {"label":"End", "x":18.5, "y":1}, + {"label":"PgDn", "x":19.5, "y":1}, + + {"label":"F5", "x":0, "y":2}, + {"label":"F6", "x":1, "y":2}, + {"label":"Caps Lock", "x":2.25, "y":2, "w":1.75}, + {"label":"A", "x":4, "y":2}, + {"label":"S", "x":5, "y":2}, + {"label":"D", "x":6, "y":2}, + {"label":"F", "x":7, "y":2}, + {"label":"G", "x":8, "y":2}, + {"label":"H", "x":9, "y":2}, + {"label":"J", "x":10, "y":2}, + {"label":"K", "x":11, "y":2}, + {"label":"L", "x":12, "y":2}, + {"label":";:", "x":13, "y":2}, + {"label":"'\"", "x":14, "y":2}, + {"label":"Enter", "x":15, "y":2, "w":2.25}, + + {"label":"F7", "x":0, "y":3}, + {"label":"F8", "x":1, "y":3}, + {"label":"Shift", "x":2.25, "y":3, "w":2.25}, + {"label":"Z", "x":4.5, "y":3}, + {"label":"X", "x":5.5, "y":3}, + {"label":"C", "x":6.5, "y":3}, + {"label":"V", "x":7.5, "y":3}, + {"label":"B", "x":8.5, "y":3}, + {"label":"N", "x":9.5, "y":3}, + {"label":"M", "x":10.5, "y":3}, + {"label":",<", "x":11.5, "y":3}, + {"label":".>", "x":12.5, "y":3}, + {"label":"/?", "x":13.5, "y":3}, + {"label":"Shift", "x":14.5, "y":3, "w":1.75}, + {"label":"Fn", "x":16.25, "y":3}, + {"label":"\u2191", "x":18.5, "y":3}, + + {"label":"F9", "x":0, "y":4}, + {"label":"F10", "x":1, "y":4}, + {"label":"Ctrl", "x":2.25, "y":4, "w":1.5}, + {"label":"Win", "x":3.75, "y":4}, + {"label":"Alt", "x":4.75, "y":4, "w":1.5}, + {"label":"Space", "x":6.25, "y":4, "w":7}, + {"label":"Alt", "x":13.25, "y":4, "w":1.5}, + {"label":"Win", "x":14.75, "y":4}, + {"label":"Ctrl", "x":15.75, "y":4, "w":1.5}, + {"label":"\u2190", "x":17.5, "y":4}, + {"label":"\u2193", "x":18.5, "y":4}, + {"label":"\u2192", "x":19.5, "y":4} + ] + }, + "LAYOUT_iso": { + "layout": [ + {"label":"F1", "x":0, "y":0}, + {"label":"F2", "x":1, "y":0}, + {"label":"`\u00ac", "x":2.25, "y":0}, + {"label":"1!", "x":3.25, "y":0}, + {"label":"2\"", "x":4.25, "y":0}, + {"label":"3\u00a3", "x":5.25, "y":0}, + {"label":"4$", "x":6.25, "y":0}, + {"label":"5%", "x":7.25, "y":0}, + {"label":"6^", "x":8.25, "y":0}, + {"label":"7&", "x":9.25, "y":0}, + {"label":"8*", "x":10.25, "y":0}, + {"label":"9(", "x":11.25, "y":0}, + {"label":"0)", "x":12.25, "y":0}, + {"label":"-_", "x":13.25, "y":0}, + {"label":"=+", "x":14.25, "y":0}, + {"label":"Bksp", "x":15.25, "y":0, "w":2}, + {"label":"Insert", "x":17.5, "y":0}, + {"label":"Home", "x":18.5, "y":0}, + {"label":"PgUp", "x":19.5, "y":0}, + + {"label":"F3", "x":0, "y":1}, + {"label":"F4", "x":1, "y":1}, + {"label":"Tab", "x":2.25, "y":1, "w":1.5}, + {"label":"Q", "x":3.75, "y":1}, + {"label":"W", "x":4.75, "y":1}, + {"label":"E", "x":5.75, "y":1}, + {"label":"R", "x":6.75, "y":1}, + {"label":"T", "x":7.75, "y":1}, + {"label":"Y", "x":8.75, "y":1}, + {"label":"U", "x":9.75, "y":1}, + {"label":"I", "x":10.75, "y":1}, + {"label":"O", "x":11.75, "y":1}, + {"label":"P", "x":12.75, "y":1}, + {"label":"[{", "x":13.75, "y":1}, + {"label":"]}", "x":14.75, "y":1}, + {"label":"Delete", "x":17.5, "y":1}, + {"label":"End", "x":18.5, "y":1}, + {"label":"PgDn", "x":19.5, "y":1}, + + {"label":"F5", "x":0, "y":2}, + {"label":"F6", "x":1, "y":2}, + {"label":"Caps Lock", "x":2.25, "y":2, "w":1.75}, + {"label":"A", "x":4, "y":2}, + {"label":"S", "x":5, "y":2}, + {"label":"D", "x":6, "y":2}, + {"label":"F", "x":7, "y":2}, + {"label":"G", "x":8, "y":2}, + {"label":"H", "x":9, "y":2}, + {"label":"J", "x":10, "y":2}, + {"label":"K", "x":11, "y":2}, + {"label":"L", "x":12, "y":2}, + {"label":";:", "x":13, "y":2}, + {"label":"'@", "x":14, "y":2}, + {"label":"#~", "x":15, "y":2}, + {"label":"Enter", "x":16, "y":1, "w":1.25, "h":2}, + + {"label":"F7", "x":0, "y":3}, + {"label":"F8", "x":1, "y":3}, + {"label":"Shift", "x":2.25, "y":3, "w":1.25}, + {"label":"\\|", "x":3.5, "y":3}, + {"label":"Z", "x":4.5, "y":3}, + {"label":"X", "x":5.5, "y":3}, + {"label":"C", "x":6.5, "y":3}, + {"label":"V", "x":7.5, "y":3}, + {"label":"B", "x":8.5, "y":3}, + {"label":"N", "x":9.5, "y":3}, + {"label":"M", "x":10.5, "y":3}, + {"label":",<", "x":11.5, "y":3}, + {"label":".>", "x":12.5, "y":3}, + {"label":"/?", "x":13.5, "y":3}, + {"label":"Shift", "x":14.5, "y":3, "w":2.75}, + {"label":"\u2191", "x":18.5, "y":3}, + + {"label":"F9", "x":0, "y":4}, + {"label":"F10", "x":1, "y":4}, + {"label":"Ctrl", "x":2.25, "y":4, "w":1.5}, + {"label":"Win", "x":3.75, "y":4}, + {"label":"Alt", "x":4.75, "y":4, "w":1.5}, + {"label":"Space", "x":6.25, "y":4, "w":7}, + {"label":"Alt", "x":13.25, "y":4, "w":1.5}, + {"label":"Win", "x":14.75, "y":4}, + {"label":"Ctrl", "x":15.75, "y":4, "w":1.5}, + {"label":"\u2190", "x":17.5, "y":4}, + {"label":"\u2193", "x":18.5, "y":4}, + {"label":"\u2192", "x":19.5, "y":4} + ] + }, + "LAYOUT_iso_split_bs_rshift": { + "layout": [ + {"label":"F1", "x":0, "y":0}, + {"label":"F2", "x":1, "y":0}, + {"label":"`\u00ac", "x":2.25, "y":0}, + {"label":"1!", "x":3.25, "y":0}, + {"label":"2\"", "x":4.25, "y":0}, + {"label":"3\u00a3", "x":5.25, "y":0}, + {"label":"4$", "x":6.25, "y":0}, + {"label":"5%", "x":7.25, "y":0}, + {"label":"6^", "x":8.25, "y":0}, + {"label":"7&", "x":9.25, "y":0}, + {"label":"8*", "x":10.25, "y":0}, + {"label":"9(", "x":11.25, "y":0}, + {"label":"0)", "x":12.25, "y":0}, + {"label":"-_", "x":13.25, "y":0}, + {"label":"=+", "x":14.25, "y":0}, + {"label":"Bksp", "x":15.25, "y":0}, + {"label":"Bksp", "x":16.25, "y":0}, + {"label":"Insert", "x":17.5, "y":0}, + {"label":"Home", "x":18.5, "y":0}, + {"label":"PgUp", "x":19.5, "y":0}, + + {"label":"F3", "x":0, "y":1}, + {"label":"F4", "x":1, "y":1}, + {"label":"Tab", "x":2.25, "y":1, "w":1.5}, + {"label":"Q", "x":3.75, "y":1}, + {"label":"W", "x":4.75, "y":1}, + {"label":"E", "x":5.75, "y":1}, + {"label":"R", "x":6.75, "y":1}, + {"label":"T", "x":7.75, "y":1}, + {"label":"Y", "x":8.75, "y":1}, + {"label":"U", "x":9.75, "y":1}, + {"label":"I", "x":10.75, "y":1}, + {"label":"O", "x":11.75, "y":1}, + {"label":"P", "x":12.75, "y":1}, + {"label":"[{", "x":13.75, "y":1}, + {"label":"]}", "x":14.75, "y":1}, + {"label":"Delete", "x":17.5, "y":1}, + {"label":"End", "x":18.5, "y":1}, + {"label":"PgDn", "x":19.5, "y":1}, + + {"label":"F5", "x":0, "y":2}, + {"label":"F6", "x":1, "y":2}, + {"label":"Caps Lock", "x":2.25, "y":2, "w":1.75}, + {"label":"A", "x":4, "y":2}, + {"label":"S", "x":5, "y":2}, + {"label":"D", "x":6, "y":2}, + {"label":"F", "x":7, "y":2}, + {"label":"G", "x":8, "y":2}, + {"label":"H", "x":9, "y":2}, + {"label":"J", "x":10, "y":2}, + {"label":"K", "x":11, "y":2}, + {"label":"L", "x":12, "y":2}, + {"label":";:", "x":13, "y":2}, + {"label":"'@", "x":14, "y":2}, + {"label":"#~", "x":15, "y":2}, + {"label":"Enter", "x":16, "y":1, "w":1.25, "h":2}, + + {"label":"F7", "x":0, "y":3}, + {"label":"F8", "x":1, "y":3}, + {"label":"Shift", "x":2.25, "y":3, "w":1.25}, + {"label":"\\|", "x":3.5, "y":3}, + {"label":"Z", "x":4.5, "y":3}, + {"label":"X", "x":5.5, "y":3}, + {"label":"C", "x":6.5, "y":3}, + {"label":"V", "x":7.5, "y":3}, + {"label":"B", "x":8.5, "y":3}, + {"label":"N", "x":9.5, "y":3}, + {"label":"M", "x":10.5, "y":3}, + {"label":",<", "x":11.5, "y":3}, + {"label":".>", "x":12.5, "y":3}, + {"label":"/?", "x":13.5, "y":3}, + {"label":"Shift", "x":14.5, "y":3, "w":1.75}, + {"label":"Fn", "x":16.25, "y":3}, + {"label":"\u2191", "x":18.5, "y":3}, + + {"label":"F9", "x":0, "y":4}, + {"label":"F10", "x":1, "y":4}, + {"label":"Ctrl", "x":2.25, "y":4, "w":1.5}, + {"label":"Win", "x":3.75, "y":4}, + {"label":"Alt", "x":4.75, "y":4, "w":1.5}, + {"label":"Space", "x":6.25, "y":4, "w":7}, + {"label":"Alt", "x":13.25, "y":4, "w":1.5}, + {"label":"Win", "x":14.75, "y":4}, + {"label":"Ctrl", "x":15.75, "y":4, "w":1.5}, + {"label":"\u2190", "x":17.5, "y":4}, + {"label":"\u2193", "x":18.5, "y":4}, + {"label":"\u2192", "x":19.5, "y":4} + ] } } } diff --git a/keyboards/superuser/ext/keymaps/default/keymap.c b/keyboards/superuser/ext/keymaps/default/keymap.c index cc3259cd58..85a9bb91f6 100644 --- a/keyboards/superuser/ext/keymaps/default/keymap.c +++ b/keyboards/superuser/ext/keymaps/default/keymap.c @@ -17,14 +17,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_tkl( + [0] = LAYOUT_all( KC_F1, KC_F2, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_F3, KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, KC_F5, KC_F6, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_F7, KC_F8, KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP, KC_F9, KC_F10, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), - [1] = LAYOUT_tkl( + [1] = LAYOUT_all( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, diff --git a/keyboards/superuser/ext/keymaps/via/keymap.c b/keyboards/superuser/ext/keymaps/via/keymap.c index 919c45d884..78b258d526 100644 --- a/keyboards/superuser/ext/keymaps/via/keymap.c +++ b/keyboards/superuser/ext/keymaps/via/keymap.c @@ -17,28 +17,28 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_tkl( + [0] = LAYOUT_all( KC_F1, KC_F2, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_F3, KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, KC_F5, KC_F6, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_F7, KC_F8, KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP, KC_F9, KC_F10, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), - [1] = LAYOUT_tkl( + [1] = LAYOUT_all( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), - [2] = LAYOUT_tkl( + [2] = LAYOUT_all( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), - [3] = LAYOUT_tkl( + [3] = LAYOUT_all( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, diff --git a/keyboards/superuser/ext/readme.md b/keyboards/superuser/ext/readme.md index 1468d21dc1..3abd75faf8 100644 --- a/keyboards/superuser/ext/readme.md +++ b/keyboards/superuser/ext/readme.md @@ -2,7 +2,7 @@ An EXT TKL PCB supporting 7u bottom row only. -* Keyboard Maintainer: superuser +* Keyboard Maintainer: [kaylanm](https://github.com/kaylanm) * Hardware Supported: superuser ext * Hardware Availability: Group buy From 125b27f31aa772f9fd41c01533509d159641414f Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Fri, 5 Nov 2021 18:03:07 +0000 Subject: [PATCH 439/595] Superuser TKL Layout Macro Refactor (#15048) * rename LAYOUT_tkl to LAYOUT_all * friendly-format info.json * use K notation in tkl.h * add matrix diagram to tkl.h * add LAYOUT_tkl_ansi_tsangan * add LAYOUT_tkl_ansi_tsangan_split_bs_rshift * add LAYOUT_tkl_iso_tsangan * add LAYOUT_tkl_iso_tsangan_split_bs_rshift * correct keyboard maintainer values --- keyboards/superuser/tkl/info.json | 490 +++++++++++++++++- .../superuser/tkl/keymaps/default/keymap.c | 4 +- keyboards/superuser/tkl/keymaps/via/keymap.c | 8 +- keyboards/superuser/tkl/readme.md | 2 +- keyboards/superuser/tkl/tkl.h | 107 +++- 5 files changed, 588 insertions(+), 23 deletions(-) diff --git a/keyboards/superuser/tkl/info.json b/keyboards/superuser/tkl/info.json index 0a8f2a3cde..4ffe528176 100644 --- a/keyboards/superuser/tkl/info.json +++ b/keyboards/superuser/tkl/info.json @@ -1,10 +1,494 @@ { "keyboard_name": "tkl", "url": "", - "maintainer": "superuser", + "maintainer": "kaylanm", + "layout_aliases": { + "LAYOUT_tkl": "LAYOUT_all" + }, "layouts": { - "LAYOUT": { - "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6.5, "y":0}, {"label":"F6", "x":7.5, "y":0}, {"label":"F7", "x":8.5, "y":0}, {"label":"F8", "x":9.5, "y":0}, {"label":"F9", "x":11, "y":0}, {"label":"F10", "x":12, "y":0}, {"label":"F11", "x":13, "y":0}, {"label":"F12", "x":14, "y":0}, {"label":"PrtSc", "x":15.25, "y":0}, {"label":"Scroll Lock", "x":16.25, "y":0}, {"label":"Pause", "x":17.25, "y":0}, {"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"label":"Bksp", "x":13, "y":1.25}, {"label":"Bksp", "x":14, "y":1.25}, {"label":"Insert", "x":15.25, "y":1.25}, {"label":"Home", "x":16.25, "y":1.25}, {"label":"PgUp", "x":17.25, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"{", "x":11.5, "y":2.25}, {"label":"}", "x":12.5, "y":2.25}, {"label":"|", "x":13.5, "y":2.25, "w":1.5}, {"label":"Delete", "x":15.25, "y":2.25}, {"label":"End", "x":16.25, "y":2.25}, {"label":"PgDn", "x":17.25, "y":2.25}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":":", "x":10.75, "y":3.25}, {"label":"\"", "x":11.75, "y":3.25}, {"label":"Enter", "x":12.75, "y":3.25, "w":2.25}, {"label":"Shift", "x":0, "y":4.25, "w":1.25}, {"label":"|", "x":1.25, "y":4.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"Shift", "x":12.25, "y":4.25, "w":1.75}, {"label":"Fn", "x":14, "y":4.25}, {"label":"\u2191", "x":16.25, "y":4.25}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.5}, {"label":"Win", "x":1.5, "y":5.25}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.5}, {"x":4, "y":5.25, "w":7}, {"label":"Alt", "x":11, "y":5.25, "w":1.5}, {"label":"Win", "x":12.5, "y":5.25}, {"label":"Ctrl", "x":13.5, "y":5.25, "w":1.5}, {"label":"\u2190", "x":15.25, "y":5.25}, {"label":"\u2193", "x":16.25, "y":5.25}, {"label":"\u2192", "x":17.25, "y":5.25}] + "LAYOUT_all": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":2, "y":0}, + {"label":"F2", "x":3, "y":0}, + {"label":"F3", "x":4, "y":0}, + {"label":"F4", "x":5, "y":0}, + {"label":"F5", "x":6.5, "y":0}, + {"label":"F6", "x":7.5, "y":0}, + {"label":"F7", "x":8.5, "y":0}, + {"label":"F8", "x":9.5, "y":0}, + {"label":"F9", "x":11, "y":0}, + {"label":"F10", "x":12, "y":0}, + {"label":"F11", "x":13, "y":0}, + {"label":"F12", "x":14, "y":0}, + {"label":"PrtSc", "x":15.25, "y":0}, + {"label":"Scroll Lock", "x":16.25, "y":0}, + {"label":"Pause", "x":17.25, "y":0}, + + {"label":"`~", "x":0, "y":1.25}, + {"label":"1!", "x":1, "y":1.25}, + {"label":"2@", "x":2, "y":1.25}, + {"label":"3#", "x":3, "y":1.25}, + {"label":"4$", "x":4, "y":1.25}, + {"label":"5%", "x":5, "y":1.25}, + {"label":"6^", "x":6, "y":1.25}, + {"label":"7&", "x":7, "y":1.25}, + {"label":"8*", "x":8, "y":1.25}, + {"label":"9(", "x":9, "y":1.25}, + {"label":"0)", "x":10, "y":1.25}, + {"label":"-_", "x":11, "y":1.25}, + {"label":"=+", "x":12, "y":1.25}, + {"label":"Bksp", "x":13, "y":1.25}, + {"label":"Bksp", "x":14, "y":1.25}, + {"label":"Insert", "x":15.25, "y":1.25}, + {"label":"Home", "x":16.25, "y":1.25}, + {"label":"PgUp", "x":17.25, "y":1.25}, + + {"label":"Tab", "x":0, "y":2.25, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.25}, + {"label":"W", "x":2.5, "y":2.25}, + {"label":"E", "x":3.5, "y":2.25}, + {"label":"R", "x":4.5, "y":2.25}, + {"label":"T", "x":5.5, "y":2.25}, + {"label":"Y", "x":6.5, "y":2.25}, + {"label":"U", "x":7.5, "y":2.25}, + {"label":"I", "x":8.5, "y":2.25}, + {"label":"O", "x":9.5, "y":2.25}, + {"label":"P", "x":10.5, "y":2.25}, + {"label":"[{", "x":11.5, "y":2.25}, + {"label":"]}", "x":12.5, "y":2.25}, + {"label":"\\|", "x":13.5, "y":2.25, "w":1.5}, + {"label":"Delete", "x":15.25, "y":2.25}, + {"label":"End", "x":16.25, "y":2.25}, + {"label":"PgDn", "x":17.25, "y":2.25}, + + {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, + {"label":"A", "x":1.75, "y":3.25}, + {"label":"S", "x":2.75, "y":3.25}, + {"label":"D", "x":3.75, "y":3.25}, + {"label":"F", "x":4.75, "y":3.25}, + {"label":"G", "x":5.75, "y":3.25}, + {"label":"H", "x":6.75, "y":3.25}, + {"label":"J", "x":7.75, "y":3.25}, + {"label":"K", "x":8.75, "y":3.25}, + {"label":"L", "x":9.75, "y":3.25}, + {"label":";:", "x":10.75, "y":3.25}, + {"label":"'\"", "x":11.75, "y":3.25}, + {"label":"Enter", "x":12.75, "y":3.25, "w":2.25}, + + {"label":"Shift", "x":0, "y":4.25, "w":1.25}, + {"label":"\\|", "x":1.25, "y":4.25}, + {"label":"Z", "x":2.25, "y":4.25}, + {"label":"X", "x":3.25, "y":4.25}, + {"label":"C", "x":4.25, "y":4.25}, + {"label":"V", "x":5.25, "y":4.25}, + {"label":"B", "x":6.25, "y":4.25}, + {"label":"N", "x":7.25, "y":4.25}, + {"label":"M", "x":8.25, "y":4.25}, + {"label":",<", "x":9.25, "y":4.25}, + {"label":".>", "x":10.25, "y":4.25}, + {"label":"/?", "x":11.25, "y":4.25}, + {"label":"Shift", "x":12.25, "y":4.25, "w":1.75}, + {"label":"Fn", "x":14, "y":4.25}, + {"label":"\u2191", "x":16.25, "y":4.25}, + + {"label":"Ctrl", "x":0, "y":5.25, "w":1.5}, + {"label":"Win", "x":1.5, "y":5.25}, + {"label":"Alt", "x":2.5, "y":5.25, "w":1.5}, + {"label":"Space", "x":4, "y":5.25, "w":7}, + {"label":"Alt", "x":11, "y":5.25, "w":1.5}, + {"label":"Win", "x":12.5, "y":5.25}, + {"label":"Ctrl", "x":13.5, "y":5.25, "w":1.5}, + {"label":"\u2190", "x":15.25, "y":5.25}, + {"label":"\u2193", "x":16.25, "y":5.25}, + {"label":"\u2192", "x":17.25, "y":5.25} + ] + }, + "LAYOUT_tkl_ansi_tsangan": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":2, "y":0}, + {"label":"F2", "x":3, "y":0}, + {"label":"F3", "x":4, "y":0}, + {"label":"F4", "x":5, "y":0}, + {"label":"F5", "x":6.5, "y":0}, + {"label":"F6", "x":7.5, "y":0}, + {"label":"F7", "x":8.5, "y":0}, + {"label":"F8", "x":9.5, "y":0}, + {"label":"F9", "x":11, "y":0}, + {"label":"F10", "x":12, "y":0}, + {"label":"F11", "x":13, "y":0}, + {"label":"F12", "x":14, "y":0}, + {"label":"PrtSc", "x":15.25, "y":0}, + {"label":"Scroll Lock", "x":16.25, "y":0}, + {"label":"Pause", "x":17.25, "y":0}, + + {"label":"`~", "x":0, "y":1.25}, + {"label":"1!", "x":1, "y":1.25}, + {"label":"2@", "x":2, "y":1.25}, + {"label":"3#", "x":3, "y":1.25}, + {"label":"4$", "x":4, "y":1.25}, + {"label":"5%", "x":5, "y":1.25}, + {"label":"6^", "x":6, "y":1.25}, + {"label":"7&", "x":7, "y":1.25}, + {"label":"8*", "x":8, "y":1.25}, + {"label":"9(", "x":9, "y":1.25}, + {"label":"0)", "x":10, "y":1.25}, + {"label":"-_", "x":11, "y":1.25}, + {"label":"=+", "x":12, "y":1.25}, + {"label":"Bksp", "x":13, "y":1.25, "w":2}, + {"label":"Insert", "x":15.25, "y":1.25}, + {"label":"Home", "x":16.25, "y":1.25}, + {"label":"PgUp", "x":17.25, "y":1.25}, + + {"label":"Tab", "x":0, "y":2.25, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.25}, + {"label":"W", "x":2.5, "y":2.25}, + {"label":"E", "x":3.5, "y":2.25}, + {"label":"R", "x":4.5, "y":2.25}, + {"label":"T", "x":5.5, "y":2.25}, + {"label":"Y", "x":6.5, "y":2.25}, + {"label":"U", "x":7.5, "y":2.25}, + {"label":"I", "x":8.5, "y":2.25}, + {"label":"O", "x":9.5, "y":2.25}, + {"label":"P", "x":10.5, "y":2.25}, + {"label":"[{", "x":11.5, "y":2.25}, + {"label":"]}", "x":12.5, "y":2.25}, + {"label":"\\|", "x":13.5, "y":2.25, "w":1.5}, + {"label":"Delete", "x":15.25, "y":2.25}, + {"label":"End", "x":16.25, "y":2.25}, + {"label":"PgDn", "x":17.25, "y":2.25}, + + {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, + {"label":"A", "x":1.75, "y":3.25}, + {"label":"S", "x":2.75, "y":3.25}, + {"label":"D", "x":3.75, "y":3.25}, + {"label":"F", "x":4.75, "y":3.25}, + {"label":"G", "x":5.75, "y":3.25}, + {"label":"H", "x":6.75, "y":3.25}, + {"label":"J", "x":7.75, "y":3.25}, + {"label":"K", "x":8.75, "y":3.25}, + {"label":"L", "x":9.75, "y":3.25}, + {"label":";:", "x":10.75, "y":3.25}, + {"label":"'\"", "x":11.75, "y":3.25}, + {"label":"Enter", "x":12.75, "y":3.25, "w":2.25}, + + {"label":"Shift", "x":0, "y":4.25, "w":2.25}, + {"label":"Z", "x":2.25, "y":4.25}, + {"label":"X", "x":3.25, "y":4.25}, + {"label":"C", "x":4.25, "y":4.25}, + {"label":"V", "x":5.25, "y":4.25}, + {"label":"B", "x":6.25, "y":4.25}, + {"label":"N", "x":7.25, "y":4.25}, + {"label":"M", "x":8.25, "y":4.25}, + {"label":",<", "x":9.25, "y":4.25}, + {"label":".>", "x":10.25, "y":4.25}, + {"label":"/?", "x":11.25, "y":4.25}, + {"label":"Shift", "x":12.25, "y":4.25, "w":2.75}, + {"label":"\u2191", "x":16.25, "y":4.25}, + + {"label":"Ctrl", "x":0, "y":5.25, "w":1.5}, + {"label":"Win", "x":1.5, "y":5.25}, + {"label":"Alt", "x":2.5, "y":5.25, "w":1.5}, + {"label":"Space", "x":4, "y":5.25, "w":7}, + {"label":"Alt", "x":11, "y":5.25, "w":1.5}, + {"label":"Win", "x":12.5, "y":5.25}, + {"label":"Ctrl", "x":13.5, "y":5.25, "w":1.5}, + {"label":"\u2190", "x":15.25, "y":5.25}, + {"label":"\u2193", "x":16.25, "y":5.25}, + {"label":"\u2192", "x":17.25, "y":5.25} + ] + }, + "LAYOUT_tkl_ansi_tsangan_split_bs_rshift": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":2, "y":0}, + {"label":"F2", "x":3, "y":0}, + {"label":"F3", "x":4, "y":0}, + {"label":"F4", "x":5, "y":0}, + {"label":"F5", "x":6.5, "y":0}, + {"label":"F6", "x":7.5, "y":0}, + {"label":"F7", "x":8.5, "y":0}, + {"label":"F8", "x":9.5, "y":0}, + {"label":"F9", "x":11, "y":0}, + {"label":"F10", "x":12, "y":0}, + {"label":"F11", "x":13, "y":0}, + {"label":"F12", "x":14, "y":0}, + {"label":"PrtSc", "x":15.25, "y":0}, + {"label":"Scroll Lock", "x":16.25, "y":0}, + {"label":"Pause", "x":17.25, "y":0}, + + {"label":"`~", "x":0, "y":1.25}, + {"label":"1!", "x":1, "y":1.25}, + {"label":"2@", "x":2, "y":1.25}, + {"label":"3#", "x":3, "y":1.25}, + {"label":"4$", "x":4, "y":1.25}, + {"label":"5%", "x":5, "y":1.25}, + {"label":"6^", "x":6, "y":1.25}, + {"label":"7&", "x":7, "y":1.25}, + {"label":"8*", "x":8, "y":1.25}, + {"label":"9(", "x":9, "y":1.25}, + {"label":"0)", "x":10, "y":1.25}, + {"label":"-_", "x":11, "y":1.25}, + {"label":"=+", "x":12, "y":1.25}, + {"label":"Bksp", "x":13, "y":1.25}, + {"label":"Bksp", "x":14, "y":1.25}, + {"label":"Insert", "x":15.25, "y":1.25}, + {"label":"Home", "x":16.25, "y":1.25}, + {"label":"PgUp", "x":17.25, "y":1.25}, + + {"label":"Tab", "x":0, "y":2.25, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.25}, + {"label":"W", "x":2.5, "y":2.25}, + {"label":"E", "x":3.5, "y":2.25}, + {"label":"R", "x":4.5, "y":2.25}, + {"label":"T", "x":5.5, "y":2.25}, + {"label":"Y", "x":6.5, "y":2.25}, + {"label":"U", "x":7.5, "y":2.25}, + {"label":"I", "x":8.5, "y":2.25}, + {"label":"O", "x":9.5, "y":2.25}, + {"label":"P", "x":10.5, "y":2.25}, + {"label":"[{", "x":11.5, "y":2.25}, + {"label":"]}", "x":12.5, "y":2.25}, + {"label":"\\|", "x":13.5, "y":2.25, "w":1.5}, + {"label":"Delete", "x":15.25, "y":2.25}, + {"label":"End", "x":16.25, "y":2.25}, + {"label":"PgDn", "x":17.25, "y":2.25}, + + {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, + {"label":"A", "x":1.75, "y":3.25}, + {"label":"S", "x":2.75, "y":3.25}, + {"label":"D", "x":3.75, "y":3.25}, + {"label":"F", "x":4.75, "y":3.25}, + {"label":"G", "x":5.75, "y":3.25}, + {"label":"H", "x":6.75, "y":3.25}, + {"label":"J", "x":7.75, "y":3.25}, + {"label":"K", "x":8.75, "y":3.25}, + {"label":"L", "x":9.75, "y":3.25}, + {"label":";:", "x":10.75, "y":3.25}, + {"label":"'\"", "x":11.75, "y":3.25}, + {"label":"Enter", "x":12.75, "y":3.25, "w":2.25}, + + {"label":"Shift", "x":0, "y":4.25, "w":2.25}, + {"label":"Z", "x":2.25, "y":4.25}, + {"label":"X", "x":3.25, "y":4.25}, + {"label":"C", "x":4.25, "y":4.25}, + {"label":"V", "x":5.25, "y":4.25}, + {"label":"B", "x":6.25, "y":4.25}, + {"label":"N", "x":7.25, "y":4.25}, + {"label":"M", "x":8.25, "y":4.25}, + {"label":",<", "x":9.25, "y":4.25}, + {"label":".>", "x":10.25, "y":4.25}, + {"label":"/?", "x":11.25, "y":4.25}, + {"label":"Shift", "x":12.25, "y":4.25, "w":1.75}, + {"label":"Fn", "x":14, "y":4.25}, + {"label":"\u2191", "x":16.25, "y":4.25}, + + {"label":"Ctrl", "x":0, "y":5.25, "w":1.5}, + {"label":"Win", "x":1.5, "y":5.25}, + {"label":"Alt", "x":2.5, "y":5.25, "w":1.5}, + {"label":"Space", "x":4, "y":5.25, "w":7}, + {"label":"Alt", "x":11, "y":5.25, "w":1.5}, + {"label":"Win", "x":12.5, "y":5.25}, + {"label":"Ctrl", "x":13.5, "y":5.25, "w":1.5}, + {"label":"\u2190", "x":15.25, "y":5.25}, + {"label":"\u2193", "x":16.25, "y":5.25}, + {"label":"\u2192", "x":17.25, "y":5.25} + ] + }, + "LAYOUT_tkl_iso_tsangan": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":2, "y":0}, + {"label":"F2", "x":3, "y":0}, + {"label":"F3", "x":4, "y":0}, + {"label":"F4", "x":5, "y":0}, + {"label":"F5", "x":6.5, "y":0}, + {"label":"F6", "x":7.5, "y":0}, + {"label":"F7", "x":8.5, "y":0}, + {"label":"F8", "x":9.5, "y":0}, + {"label":"F9", "x":11, "y":0}, + {"label":"F10", "x":12, "y":0}, + {"label":"F11", "x":13, "y":0}, + {"label":"F12", "x":14, "y":0}, + {"label":"PrtSc", "x":15.25, "y":0}, + {"label":"Scroll Lock", "x":16.25, "y":0}, + {"label":"Pause", "x":17.25, "y":0}, + + {"label":"`\u00ac", "x":0, "y":1.25}, + {"label":"1!", "x":1, "y":1.25}, + {"label":"2\"", "x":2, "y":1.25}, + {"label":"3\u00a3", "x":3, "y":1.25}, + {"label":"4$", "x":4, "y":1.25}, + {"label":"5%", "x":5, "y":1.25}, + {"label":"6^", "x":6, "y":1.25}, + {"label":"7&", "x":7, "y":1.25}, + {"label":"8*", "x":8, "y":1.25}, + {"label":"9(", "x":9, "y":1.25}, + {"label":"0)", "x":10, "y":1.25}, + {"label":"-_", "x":11, "y":1.25}, + {"label":"=+", "x":12, "y":1.25}, + {"label":"Bksp", "x":13, "y":1.25, "w":2}, + {"label":"Insert", "x":15.25, "y":1.25}, + {"label":"Home", "x":16.25, "y":1.25}, + {"label":"PgUp", "x":17.25, "y":1.25}, + + {"label":"Tab", "x":0, "y":2.25, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.25}, + {"label":"W", "x":2.5, "y":2.25}, + {"label":"E", "x":3.5, "y":2.25}, + {"label":"R", "x":4.5, "y":2.25}, + {"label":"T", "x":5.5, "y":2.25}, + {"label":"Y", "x":6.5, "y":2.25}, + {"label":"U", "x":7.5, "y":2.25}, + {"label":"I", "x":8.5, "y":2.25}, + {"label":"O", "x":9.5, "y":2.25}, + {"label":"P", "x":10.5, "y":2.25}, + {"label":"[{", "x":11.5, "y":2.25}, + {"label":"]}", "x":12.5, "y":2.25}, + {"label":"Delete", "x":15.25, "y":2.25}, + {"label":"End", "x":16.25, "y":2.25}, + {"label":"PgDn", "x":17.25, "y":2.25}, + + {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, + {"label":"A", "x":1.75, "y":3.25}, + {"label":"S", "x":2.75, "y":3.25}, + {"label":"D", "x":3.75, "y":3.25}, + {"label":"F", "x":4.75, "y":3.25}, + {"label":"G", "x":5.75, "y":3.25}, + {"label":"H", "x":6.75, "y":3.25}, + {"label":"J", "x":7.75, "y":3.25}, + {"label":"K", "x":8.75, "y":3.25}, + {"label":"L", "x":9.75, "y":3.25}, + {"label":";:", "x":10.75, "y":3.25}, + {"label":"'@", "x":11.75, "y":3.25}, + {"label":"#~", "x":12.75, "y":3.25}, + {"label":"Enter", "x":13.75, "y":2.25, "w":1.25, "h":2}, + + {"label":"Shift", "x":0, "y":4.25, "w":1.25}, + {"label":"\\|", "x":1.25, "y":4.25}, + {"label":"Z", "x":2.25, "y":4.25}, + {"label":"X", "x":3.25, "y":4.25}, + {"label":"C", "x":4.25, "y":4.25}, + {"label":"V", "x":5.25, "y":4.25}, + {"label":"B", "x":6.25, "y":4.25}, + {"label":"N", "x":7.25, "y":4.25}, + {"label":"M", "x":8.25, "y":4.25}, + {"label":",<", "x":9.25, "y":4.25}, + {"label":".>", "x":10.25, "y":4.25}, + {"label":"/?", "x":11.25, "y":4.25}, + {"label":"Shift", "x":12.25, "y":4.25, "w":2.75}, + {"label":"\u2191", "x":16.25, "y":4.25}, + + {"label":"Ctrl", "x":0, "y":5.25, "w":1.5}, + {"label":"Win", "x":1.5, "y":5.25}, + {"label":"Alt", "x":2.5, "y":5.25, "w":1.5}, + {"label":"Space", "x":4, "y":5.25, "w":7}, + {"label":"Alt", "x":11, "y":5.25, "w":1.5}, + {"label":"Win", "x":12.5, "y":5.25}, + {"label":"Ctrl", "x":13.5, "y":5.25, "w":1.5}, + {"label":"\u2190", "x":15.25, "y":5.25}, + {"label":"\u2193", "x":16.25, "y":5.25}, + {"label":"\u2192", "x":17.25, "y":5.25} + ] + }, + "LAYOUT_tkl_iso_tsangan_split_bs_rshift": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":2, "y":0}, + {"label":"F2", "x":3, "y":0}, + {"label":"F3", "x":4, "y":0}, + {"label":"F4", "x":5, "y":0}, + {"label":"F5", "x":6.5, "y":0}, + {"label":"F6", "x":7.5, "y":0}, + {"label":"F7", "x":8.5, "y":0}, + {"label":"F8", "x":9.5, "y":0}, + {"label":"F9", "x":11, "y":0}, + {"label":"F10", "x":12, "y":0}, + {"label":"F11", "x":13, "y":0}, + {"label":"F12", "x":14, "y":0}, + {"label":"PrtSc", "x":15.25, "y":0}, + {"label":"Scroll Lock", "x":16.25, "y":0}, + {"label":"Pause", "x":17.25, "y":0}, + + {"label":"`\u00ac", "x":0, "y":1.25}, + {"label":"1!", "x":1, "y":1.25}, + {"label":"2\"", "x":2, "y":1.25}, + {"label":"3\u00a3", "x":3, "y":1.25}, + {"label":"4$", "x":4, "y":1.25}, + {"label":"5%", "x":5, "y":1.25}, + {"label":"6^", "x":6, "y":1.25}, + {"label":"7&", "x":7, "y":1.25}, + {"label":"8*", "x":8, "y":1.25}, + {"label":"9(", "x":9, "y":1.25}, + {"label":"0)", "x":10, "y":1.25}, + {"label":"-_", "x":11, "y":1.25}, + {"label":"=+", "x":12, "y":1.25}, + {"label":"Bksp", "x":13, "y":1.25}, + {"label":"Bksp", "x":14, "y":1.25}, + {"label":"Insert", "x":15.25, "y":1.25}, + {"label":"Home", "x":16.25, "y":1.25}, + {"label":"PgUp", "x":17.25, "y":1.25}, + + {"label":"Tab", "x":0, "y":2.25, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.25}, + {"label":"W", "x":2.5, "y":2.25}, + {"label":"E", "x":3.5, "y":2.25}, + {"label":"R", "x":4.5, "y":2.25}, + {"label":"T", "x":5.5, "y":2.25}, + {"label":"Y", "x":6.5, "y":2.25}, + {"label":"U", "x":7.5, "y":2.25}, + {"label":"I", "x":8.5, "y":2.25}, + {"label":"O", "x":9.5, "y":2.25}, + {"label":"P", "x":10.5, "y":2.25}, + {"label":"[{", "x":11.5, "y":2.25}, + {"label":"]}", "x":12.5, "y":2.25}, + {"label":"Delete", "x":15.25, "y":2.25}, + {"label":"End", "x":16.25, "y":2.25}, + {"label":"PgDn", "x":17.25, "y":2.25}, + + {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, + {"label":"A", "x":1.75, "y":3.25}, + {"label":"S", "x":2.75, "y":3.25}, + {"label":"D", "x":3.75, "y":3.25}, + {"label":"F", "x":4.75, "y":3.25}, + {"label":"G", "x":5.75, "y":3.25}, + {"label":"H", "x":6.75, "y":3.25}, + {"label":"J", "x":7.75, "y":3.25}, + {"label":"K", "x":8.75, "y":3.25}, + {"label":"L", "x":9.75, "y":3.25}, + {"label":";:", "x":10.75, "y":3.25}, + {"label":"'@", "x":11.75, "y":3.25}, + {"label":"#~", "x":12.75, "y":3.25}, + {"label":"Enter", "x":13.75, "y":2.25, "w":1.25, "h":2}, + + {"label":"Shift", "x":0, "y":4.25, "w":1.25}, + {"label":"\\|", "x":1.25, "y":4.25}, + {"label":"Z", "x":2.25, "y":4.25}, + {"label":"X", "x":3.25, "y":4.25}, + {"label":"C", "x":4.25, "y":4.25}, + {"label":"V", "x":5.25, "y":4.25}, + {"label":"B", "x":6.25, "y":4.25}, + {"label":"N", "x":7.25, "y":4.25}, + {"label":"M", "x":8.25, "y":4.25}, + {"label":",<", "x":9.25, "y":4.25}, + {"label":".>", "x":10.25, "y":4.25}, + {"label":"/?", "x":11.25, "y":4.25}, + {"label":"Shift", "x":12.25, "y":4.25, "w":1.75}, + {"label":"Fn", "x":14, "y":4.25}, + {"label":"\u2191", "x":16.25, "y":4.25}, + + {"label":"Ctrl", "x":0, "y":5.25, "w":1.5}, + {"label":"Win", "x":1.5, "y":5.25}, + {"label":"Alt", "x":2.5, "y":5.25, "w":1.5}, + {"label":"Space", "x":4, "y":5.25, "w":7}, + {"label":"Alt", "x":11, "y":5.25, "w":1.5}, + {"label":"Win", "x":12.5, "y":5.25}, + {"label":"Ctrl", "x":13.5, "y":5.25, "w":1.5}, + {"label":"\u2190", "x":15.25, "y":5.25}, + {"label":"\u2193", "x":16.25, "y":5.25}, + {"label":"\u2192", "x":17.25, "y":5.25} + ] } } } diff --git a/keyboards/superuser/tkl/keymaps/default/keymap.c b/keyboards/superuser/tkl/keymaps/default/keymap.c index 6eada87c84..b0ab538247 100644 --- a/keyboards/superuser/tkl/keymaps/default/keymap.c +++ b/keyboards/superuser/tkl/keymaps/default/keymap.c @@ -17,7 +17,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_tkl( + [0] = LAYOUT_all( KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, @@ -25,7 +25,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), - [1] = LAYOUT_tkl( + [1] = LAYOUT_all( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, diff --git a/keyboards/superuser/tkl/keymaps/via/keymap.c b/keyboards/superuser/tkl/keymaps/via/keymap.c index f828ccc515..a2bea4e6e1 100644 --- a/keyboards/superuser/tkl/keymaps/via/keymap.c +++ b/keyboards/superuser/tkl/keymaps/via/keymap.c @@ -17,7 +17,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_tkl( + [0] = LAYOUT_all( KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, @@ -25,7 +25,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT), - [1] = LAYOUT_tkl( + [1] = LAYOUT_all( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, @@ -33,7 +33,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), - [2] = LAYOUT_tkl( + [2] = LAYOUT_all( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, @@ -41,7 +41,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), - [3] = LAYOUT_tkl( + [3] = LAYOUT_all( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, diff --git a/keyboards/superuser/tkl/readme.md b/keyboards/superuser/tkl/readme.md index be5a2cc3a5..1c9ad5b3cc 100644 --- a/keyboards/superuser/tkl/readme.md +++ b/keyboards/superuser/tkl/readme.md @@ -2,7 +2,7 @@ An F12 TKL PCB supporting 7u bottom row only. -* Keyboard Maintainer: superuser +* Keyboard Maintainer: [kaylanm](https://github.com/kaylanm) * Hardware Supported: superuser tkl * Hardware Availability: Group buy diff --git a/keyboards/superuser/tkl/tkl.h b/keyboards/superuser/tkl/tkl.h index 31ed941d3e..4cbd8ecfbd 100644 --- a/keyboards/superuser/tkl/tkl.h +++ b/keyboards/superuser/tkl/tkl.h @@ -17,18 +17,99 @@ #include "quantum.h" -#define LAYOUT_tkl(\ - K000, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K312, K114, K115, K116, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, \ - K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K415, \ - K500, K501, K502, K506, K511, K512, K513, K514, K515, K516 \ +/* + * ┌───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┐ + * │00 │ │02 │03 │04 │05 │ │06 │07 │08 │09 │ │0A │0B │0C │0D │ │0E │0F │0G │ + * └───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┘ + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ ┌───┬───┬───┐ ┌───────┐ + * │10 │11 │12 │13 │14 │15 │16 │17 │18 │19 │1A │1B │1C │1D │3C │ │1E │1F │1G │ │1D │ 2u Backspace + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤ ├───┼───┼───┤ └─┬─────┤ + * │20 │21 │22 │23 │24 │25 │26 │27 │28 │29 │2A │2B │2C │2D │ │2E │2F │2G │ │ │ + * 2.25u ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ └───┴───┴───┘ ┌──┴┐3D │ ISO Enter + * LShift │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3A │3B │3D │ │2D │ │ + * ┌────────┐ ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤ ┌───┐ ┌─┴───┴────┤ + * │40 │ │40 │41 │42 │43 │44 │45 │46 │47 │48 │49 │4A │4B │4C │4D │ │4F │ │4C │ 2.75u RShift + * └────────┘ ├────┴┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴───┴──┬┴───┴┬───┬─┴───┤ ┌───┼───┼───┐ └──────────┘ + * │50 │51 │52 │56 │5B │5C │5D │ │5E │5F │5G │ + * └─────┴───┴─────┴───────────────────────────┴─────┴───┴─────┘ └───┴───┴───┘ + */ + +#define LAYOUT_all(\ + K00, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K3C, K1E, K1F, K1G, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \ + K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4F, \ + K50, K51, K52, K56, K5B, K5C, K5D, K5E, K5F, K5G \ +) { \ + { K00, ___, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, ___, ___, ___ }, \ + { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, ___, K4F, ___ }, \ + { K50, K51, K52, ___, ___, ___, K56, ___, ___, ___, ___, K5B, K5C, K5D, K5E, K5F, K5G } \ +} + +#define LAYOUT_tkl_ansi_tsangan( \ + K00, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \ + K40, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4F, \ + K50, K51, K52, K56, K5B, K5C, K5D, K5E, K5F, K5G \ +) { \ + { K00, ___, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, ___, K3D, ___, ___, ___ }, \ + { K40, ___, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, ___, ___, K4F, ___ }, \ + { K50, K51, K52, ___, ___, ___, K56, ___, ___, ___, ___, K5B, K5C, K5D, K5E, K5F, K5G } \ +} + +#define LAYOUT_tkl_ansi_tsangan_split_bs_rshift( \ + K00, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K3C, K1E, K1F, K1G, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, \ + K40, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4F, \ + K50, K51, K52, K56, K5B, K5C, K5D, K5E, K5F, K5G \ +) { \ + { K00, ___, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, ___, ___, ___ }, \ + { K40, ___, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, ___, K4F, ___ }, \ + { K50, K51, K52, ___, ___, ___, K56, ___, ___, ___, ___, K5B, K5C, K5D, K5E, K5F, K5G } \ +} + +#define LAYOUT_tkl_iso_tsangan( \ + K00, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2E, K2F, K2G, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K2D, K3D, \ + K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4F, \ + K50, K51, K52, K56, K5B, K5C, K5D, K5E, K5F, K5G \ +) { \ + { K00, ___, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, ___, K3D, ___, ___, ___ }, \ + { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, ___, ___, K4F, ___ }, \ + { K50, K51, K52, ___, ___, ___, K56, ___, ___, ___, ___, K5B, K5C, K5D, K5E, K5F, K5G } \ +} + +#define LAYOUT_tkl_iso_tsangan_split_bs_rshift( \ + K00, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K3C, K1E, K1F, K1G, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2E, K2F, K2G, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K2D, K3D, \ + K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4F, \ + K50, K51, K52, K56, K5B, K5C, K5D, K5E, K5F, K5G \ ) { \ - { K000, KC_NO, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016 }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116 }, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216 }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, KC_NO, KC_NO, KC_NO }, \ - { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, KC_NO, K415, KC_NO }, \ - { K500, K501, K502, KC_NO, KC_NO, KC_NO, K506, KC_NO, KC_NO, KC_NO, KC_NO, K511, K512, K513, K514, K515, K516 } \ + { K00, ___, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, K1G }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, K2F, K2G }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, ___, ___, ___ }, \ + { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, ___, K4F, ___ }, \ + { K50, K51, K52, ___, ___, ___, K56, ___, ___, ___, ___, K5B, K5C, K5D, K5E, K5F, K5G } \ } From 69ef8d630c5f35cf50b56e05b6816413a99d1271 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Fri, 5 Nov 2021 11:24:58 -0700 Subject: [PATCH 440/595] [Keyboard] Fix compilation issues for yanghu Unicorne (#15068) --- keyboards/yanghu/unicorne/unicorne.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/keyboards/yanghu/unicorne/unicorne.c b/keyboards/yanghu/unicorne/unicorne.c index 27b87253df..bce8f52075 100644 --- a/keyboards/yanghu/unicorne/unicorne.c +++ b/keyboards/yanghu/unicorne/unicorne.c @@ -14,7 +14,7 @@ * along with this program. If not, see . */ #include "unicorne.h" - +#include "i2c_master.h" // Custom i2c init to enable internal pull up resistor for i2c. void i2c_init(void) { @@ -23,13 +23,13 @@ void i2c_init(void) { is_initialised = true; // Try releasing special pins for a short time - palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_INPUT); - palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_INPUT); + palSetLineMode(I2C1_SCL_PIN, PAL_MODE_INPUT); + palSetLineMode(I2C1_SDA_PIN, PAL_MODE_INPUT); chThdSleepMilliseconds(10); // Use internal pull up since we do not have pull up on i2c pins in v1 design. - palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_ALTERNATE(I2C1_SCL_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP); - palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_ALTERNATE(I2C1_SDA_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP); + palSetLineMode(I2C1_SCL_PIN, PAL_MODE_ALTERNATE(I2C1_SCL_PAL_MODE) | PAL_OUTPUT_TYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP); + palSetLineMode(I2C1_SDA_PIN, PAL_MODE_ALTERNATE(I2C1_SDA_PAL_MODE) | PAL_OUTPUT_TYPE_OPENDRAIN | PAL_STM32_PUPDR_PULLUP); } } @@ -58,7 +58,7 @@ led_config_t g_led_config = {{ {208, 44}, {130, 60} }, {// LED Index to Flag - LED_FLAG_ALL, LED_FLAG_ALL, LED_FLAG_ALL, LED_FLAG_ALL, LED_FLAG_ALL, + LED_FLAG_ALL, LED_FLAG_ALL, LED_FLAG_ALL, LED_FLAG_ALL, LED_FLAG_ALL, LED_FLAG_ALL, LED_FLAG_ALL, LED_FLAG_ALL }}; // clang-format on @@ -138,11 +138,13 @@ void set_keylog(uint16_t keycode, keyrecord_t *record) { __attribute__((weak)) void oled_render_keylog(void) { oled_write(keylog_str, false); } // Keymaps can override this function -__attribute__((weak)) void oled_task_user(void) { +__attribute__((weak)) bool oled_task_kb(void) { + if (!oled_task_user()) { return false; } /* oled_render_keylog(); */ oled_render_layer(); oled_render_mods(); led_t led_state = host_keyboard_led_state(); oled_render_capslock(led_state.caps_lock); + return true; } #endif From 6bed639d084871df44389c23b82712ed16e013e0 Mon Sep 17 00:00:00 2001 From: Cory Ginsberg Date: Fri, 5 Nov 2021 13:27:18 -0500 Subject: [PATCH 441/595] [Keymap][GMMK Pro] Add personal profile (#15069) Co-authored-by: Drashna Jaelre Co-authored-by: Cory Ginsberg --- .../pro/ansi/keymaps/coryginsberg/config.h | 24 ++++ .../pro/ansi/keymaps/coryginsberg/keymap.c | 111 ++++++++++++++++++ .../pro/ansi/keymaps/coryginsberg/readme.md | 15 +++ .../pro/ansi/keymaps/coryginsberg/rules.mk | 5 + 4 files changed, 155 insertions(+) create mode 100644 keyboards/gmmk/pro/ansi/keymaps/coryginsberg/config.h create mode 100644 keyboards/gmmk/pro/ansi/keymaps/coryginsberg/keymap.c create mode 100644 keyboards/gmmk/pro/ansi/keymaps/coryginsberg/readme.md create mode 100644 keyboards/gmmk/pro/ansi/keymaps/coryginsberg/rules.mk diff --git a/keyboards/gmmk/pro/ansi/keymaps/coryginsberg/config.h b/keyboards/gmmk/pro/ansi/keymaps/coryginsberg/config.h new file mode 100644 index 0000000000..6b06448f71 --- /dev/null +++ b/keyboards/gmmk/pro/ansi/keymaps/coryginsberg/config.h @@ -0,0 +1,24 @@ +/* Copyright 2021 Glorious, LLC + Copyright 2021 Cory Ginsberg (@coryginsberg) + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +// #define TAPPING_TOGGLE 2 +// TT set to two taps + +#define TAPPING_TERM 250 +#define RGBLIGHT_DEFAULT_MODE SOLID_WHITE diff --git a/keyboards/gmmk/pro/ansi/keymaps/coryginsberg/keymap.c b/keyboards/gmmk/pro/ansi/keymaps/coryginsberg/keymap.c new file mode 100644 index 0000000000..41278868db --- /dev/null +++ b/keyboards/gmmk/pro/ansi/keymaps/coryginsberg/keymap.c @@ -0,0 +1,111 @@ +/* Copyright 2021 Glorious, LLC + Copyright 2021 Cory Ginsberg (@coryginsberg) + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + +void dance_media(qk_tap_dance_state_t *state, void *user_data) { + if (state->count == 1) { + tap_code(KC_MPLY); + } else if (state->count == 2) { + tap_code(KC_MNXT); + } else if (state->count == 3) { + tap_code(KC_MPRV); + } else { + reset_tap_dance(state); + } +} + +qk_tap_dance_action_t tap_dance_actions[] = { + // Tap once for shift, twice for Caps Lock + [0] = ACTION_TAP_DANCE_DOUBLE(KC_LSFT, KC_CAPS), + [1] = ACTION_TAP_DANCE_FN(dance_media)}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +// ESC F1 F2 F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 Prt Rotary(Mute) +// ~ 1 2 3 4 5 6 7 8 9 0 - (=) BackSpc Del +// Tab Q W E R T Y U I O P [ ] \ PgUp +// Caps A S D F G H J K L ; " Enter PgDn +// Sh_L Z X C V B N M , . ? Sh_R Up End +// Ct_L Alt_L Win_L SPACE Ct_R Alt_R FN Left Down Right + + // The FN key by default maps to a momentary toggle to layer 1 to provide access to the RESET key (to put the board into bootloader mode). Without + // this mapping, you have to open the case to hit the button on the bottom of the PCB (near the USB cable attachment) while plugging in the USB + // cable to get the board into bootloader mode - definitely not fun when you're working on your QMK builds. Remove this and put it back to KC_RGUI + // if that's your preference. + // + // To put the keyboard in bootloader mode, use FN+backslash. If you accidentally put it into bootloader, you can just unplug the USB cable and + // it'll be back to normal when you plug it back in. + [0] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, TO(1), + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(4), TO(2), KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, TD(1), TO(0), + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RALT, MO(4), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [2] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, TD(1), TO(0), + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RALT, MO(4), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [3] = LAYOUT( + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_PSLS, KC_PAST, KC_PMNS, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_7, KC_8, KC_9, KC_PPLS, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_4, KC_5, KC_6, KC_PPLS, XXXXXXX, KC_PENT, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_1, KC_2, KC_3, KC_EQL, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, KC_0, KC_DOT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX + ), + [4] = LAYOUT( + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, TD(1), _______, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RGB_M_P, XXXXXXX, XXXXXXX, RESET, RGB_MODE_FORWARD, + XXXXXXX, XXXXXXX, RGB_SAI, XXXXXXX, XXXXXXX, XXXXXXX, RGB_HUI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, RGB_MODE_REVERSE, + _______, XXXXXXX, XXXXXXX, XXXXXXX, RGB_VAI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, RGB_TOG, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, KC_MEDIA_PREV_TRACK, KC_MEDIA_PLAY_PAUSE, KC_MEDIA_NEXT_TRACK + ), + [5] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; + +bool encoder_update_user(uint8_t index, bool clockwise) { + if (clockwise) { + tap_code(KC_VOLU); + } + else { + tap_code(KC_VOLD); + } + return true; +} diff --git a/keyboards/gmmk/pro/ansi/keymaps/coryginsberg/readme.md b/keyboards/gmmk/pro/ansi/keymaps/coryginsberg/readme.md new file mode 100644 index 0000000000..e448521572 --- /dev/null +++ b/keyboards/gmmk/pro/ansi/keymaps/coryginsberg/readme.md @@ -0,0 +1,15 @@ +# Description +Mac and Windows profiles with special touches for the Mac profile. + +## Windows Profile +Should be nearly identical to the default profile for GMMK Pro. Only major difference is the button next to F12 is now PrintScreen and clicking the rotary dial switches profiles instead of muting. + +## Mac Profile +Besides the usual swapping of the alt and windows/cmd placement also changes the following: +* Double press shift to activate caps lock +* Capslock is escape +* Button next to F12: + * 1 press: play/pause + * 2 presses: skip + * 3 presses: previous +* Clicking Rotary Dial switches profiles diff --git a/keyboards/gmmk/pro/ansi/keymaps/coryginsberg/rules.mk b/keyboards/gmmk/pro/ansi/keymaps/coryginsberg/rules.mk new file mode 100644 index 0000000000..1dd6809223 --- /dev/null +++ b/keyboards/gmmk/pro/ansi/keymaps/coryginsberg/rules.mk @@ -0,0 +1,5 @@ +VIA_ENABLE = yes +MOUSEKEY_ENABLE = no +TAP_DANCE_ENABLE = yes +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +UNICODE_ENABLE = yes From 892666f19ab3906ccc3e5bc872406eaca36ea1a7 Mon Sep 17 00:00:00 2001 From: Sergey Vlasov Date: Fri, 5 Nov 2021 21:27:35 +0300 Subject: [PATCH 442/595] kprepublic/bm65rgb/rev1: Fix info.json (#15066) --- keyboards/kprepublic/bm65rgb/rev1/info.json | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/keyboards/kprepublic/bm65rgb/rev1/info.json b/keyboards/kprepublic/bm65rgb/rev1/info.json index 444d8cee85..d69fb8e5cf 100644 --- a/keyboards/kprepublic/bm65rgb/rev1/info.json +++ b/keyboards/kprepublic/bm65rgb/rev1/info.json @@ -3,7 +3,7 @@ "url": "", "maintainer": "bytesapart", "layouts": { - "LAYOUT_65_ansi": { + "LAYOUT_65_ansi_blocker": { "layout": [ {"label":"K00 (B0,D0)", "x":0, "y":0}, {"label":"K01 (B0,D1)", "x":1, "y":0}, @@ -20,6 +20,7 @@ {"label":"K0C (B0,C7)", "x":12, "y":0}, {"label":"K0D (B0,F7)", "x":13, "y":0, "w":2}, {"label":"K0E (B0,F6)", "x":15, "y":0}, + {"label":"K10 (B1,D0)", "x":0, "y":1, "w":1.5}, {"label":"K11 (B1,D1)", "x":1.5, "y":1}, {"label":"K12 (B1,D2)", "x":2.5, "y":1}, @@ -35,6 +36,7 @@ {"label":"K1C (B1,C7)", "x":12.5, "y":1}, {"label":"K1D (B1,F7)", "x":13.5, "y":1, "w":1.5}, {"label":"K1E (B1,F6)", "x":15, "y":1}, + {"label":"K20 (B2,D0)", "x":0, "y":2, "w":1.75}, {"label":"K22 (B2,D2)", "x":1.75, "y":2}, {"label":"K23 (B2,D3)", "x":2.75, "y":2}, @@ -49,6 +51,7 @@ {"label":"K2C (B2,C7)", "x":11.75, "y":2}, {"label":"K2D (B2,F7)", "x":12.75, "y":2, "w":2.25}, {"label":"K2E (B2,F6)", "x":15, "y":2}, + {"label":"K31 (B3,D1)", "x":0, "y":3, "w":2.25}, {"label":"K32 (B3,D2)", "x":2.25, "y":3}, {"label":"K33 (B3,D3)", "x":3.25, "y":3}, @@ -63,14 +66,15 @@ {"label":"K3C (B3,C7)", "x":12.25, "y":3, "w":1.75}, {"label":"K3D (B3,F7)", "x":14, "y":3}, {"label":"K3E (B3,F6)", "x":15, "y":3}, + {"label":"K40 (E6,D0)", "x":0, "y":4, "w":1.25}, {"label":"K41 (E6,D1)", "x":1.25, "y":4, "w":1.25}, {"label":"K42 (E6,D2)", "x":2.5, "y":4, "w":1.25}, {"label":"K46 (E6,D6)", "x":3.75, "y":4, "w":6.25}, - {"label":"K49 (E6,B5)", "x":10, "y":4}, - {"label":"K4A (E6,B6)", "x":11, "y":4}, {"label":"K49 (E6,B5)", "x":10, "y":4, "w":1.25}, {"label":"K4A (E6,B6)", "x":11.25, "y":4, "w":1.25}, + {"label":"K4C (E6,C7)", "x":13, "y":4}, + {"label":"K4D (E6,F7)", "x":14, "y":4}, {"label":"K4E (E6,F6)", "x":15, "y":4} ] } From 827115a4f69eec494687f4fdea62acc7b310f910 Mon Sep 17 00:00:00 2001 From: kototama Date: Fri, 5 Nov 2021 19:27:48 +0100 Subject: [PATCH 443/595] [Keymap] Revamp the ergodox french_hacker layout (#15064) --- .../community/ergodox/french_hacker/keymap.c | 263 +++--------------- .../community/ergodox/french_hacker/readme.md | 27 +- 2 files changed, 47 insertions(+), 243 deletions(-) diff --git a/layouts/community/ergodox/french_hacker/keymap.c b/layouts/community/ergodox/french_hacker/keymap.c index b4c8e37bd9..44b0c47860 100644 --- a/layouts/community/ergodox/french_hacker/keymap.c +++ b/layouts/community/ergodox/french_hacker/keymap.c @@ -7,82 +7,64 @@ #define BASE 0 // default Colemak Mod-DH layer #define SYMB 1 // symbols #define MDIA 2 // media keys -#define ACC 3 // accented characters - -#define QCOPY 0 // Qubes OS VM to VM copy -#define QPASTE 1 // Qubes OS VM to VM paste -#define M_ACIRC 2 // â -#define M_ECIRC 3 // ê -#define M_ICIRC 4 // î -#define M_OCIRC 5 // ô -#define M_UCIRC 6 // û -#define M_YCIRC 7 // ŷ -#define M_AUMLT 8 // ä -#define M_EUMLT 9 // ë -#define M_IUMLT 10 // ï -#define M_OUMLT 11 // ö -#define M_UUMLT 12 // ü -#define M_YUMLT 13 // ÿ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Keymap 0: Base Colemak Mod-DH layer * * ,--------------------------------------------------. ,--------------------------------------------------. - * | Esc | 1 | 2 | 3 | 4 | 5 | | | | 6 | 7 | 8 | 9 | 0 | | + * | Esc | & _1 | é _2 | " _3 | ' _4 | ( _5 | | | | - _6 | è _7 | _ _8 | ç _9 | à _0 | | * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | Q | W | F | P | B | TO(0)| |TO(2) | J | L | U | Y | ; | | + * | | Q | W | F | P | B | TO(0)| |TO(2) | J | L | U | Y | ; | Ins | * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| * | Tab | A | R | S | T | G |------| |------| M | N | E | I | O | Bcksp | - * |--------+------+------+------+------+------| TO(1)| |OSL(3)|------+------+------+------+------+--------| + * |--------+------+------+------+------+------| TO(1)| | MEH |------+------+------+------+------+--------| * | LShift | Z | X | C | D | V | | | | K | H | , | . | : | Rshift | * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | Ins | Caps | Left | Right| MO(2)| | MO(2)| Down | Up | PgDn | PgUp | + * | ù | | Left | Right| MO(2)| | MO(2)| Down | Up | PgDn | PgUp | * `----------------------------------' `----------------------------------' * ,-------------. ,-------------. - * |QCopy | Ralt | | Ralt |QPaste| - * ,------|------|------| |------+------+------. - * | | | Home | | End | | | - * | Space| Ctrl |------| |------| Ctrl |Enter | - * | | | LAlt | | LAlt | | | - * `--------------------' `--------------------' + * | | Ralt | | Ralt | | + * ,-------|------|------| |------+------+------. + * | | | Home | | End | | | + * | Space | Ctrl |------| |------| Ctrl | Enter | + * | | | LAlt | | LAlt | | | + * `---------------------' `---------------------' */ - // If it accepts an argument (i.e, is a function), it doesn't need KC_. -// Otherwise, it needs KC_* [BASE] = LAYOUT_ergodox( // layer 0 : default // left hand - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_TRNS, - KC_TRNS, FR_Q, FR_W, KC_F, KC_P, KC_B, TO(BASE), - KC_TAB, FR_A, KC_R, KC_S, KC_T, KC_G, - KC_LSFT, FR_Z, KC_X, KC_C, KC_D, KC_V, TO(SYMB), - KC_INS, KC_CAPS, KC_LEFT,KC_RIGHT, MO(SYMB), - M(QCOPY), KC_RALT, + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_NO, + KC_NO, FR_Q, FR_W, KC_F, KC_P, KC_B, TO(BASE), + KC_TAB, FR_A, KC_R, KC_S, KC_T, KC_G, + KC_LSFT, FR_Z, KC_X, KC_C, KC_D, KC_V, TO(SYMB), + FR_UGRV, KC_NO, KC_LEFT, KC_RIGHT, MO(SYMB), + KC_NO, KC_RALT, KC_HOME, KC_SPC,KC_LCTRL, KC_LALT, // right hand - KC_TRNS, KC_6, KC_7, KC_8, KC_9, KC_0, KC_TRNS, - TO(MDIA), KC_J, KC_L, KC_U, KC_Y, FR_SCLN, KC_TRNS, - FR_M, KC_N, KC_E, KC_I, KC_O, KC_BSPC, - OSL(ACC), KC_K, KC_H, FR_COMM, FR_DOT, FR_COLN, KC_RSFT, - MO(SYMB), KC_DOWN, KC_UP, KC_PGDN, KC_PGUP, + KC_NO, KC_6, KC_7, KC_8, KC_9, KC_0, KC_NO, + TO(MDIA), KC_J, KC_L, KC_U, KC_Y, FR_SCLN, KC_INS, + FR_M, KC_N, KC_E, KC_I, KC_O, KC_BSPC, + OSM(MOD_MEH), KC_K, KC_H, FR_COMM, FR_DOT, FR_COLN, KC_RSFT, + MO(SYMB), KC_DOWN, KC_UP, KC_PGDN, KC_PGUP, - KC_RALT, M(QPASTE), + KC_RALT, KC_NO, KC_END, KC_LALT,KC_RCTL, KC_ENT ), /* Keymap 1: Symbol Layer - * // TODO missing: ¤ + * * ,--------------------------------------------------. ,--------------------------------------------------. * |Version | F1 | F2 | F3 | F4 | F5 | | | | F6 | F7 | F8 | F9 | F10 | F11 | * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | § | < | { | \ | ~ | | | | % | @ | } | > | µ | F12 | + * | | § | < | { | \ | ~ | | | | % | @ | } | > | ¨ | F12 | * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| * | | ' | = | - | ( | + |------| |------| * | ) | _ | / | " | | * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| * | | ` | ? | # | [ | | | | | | & | ] | $ | ! | ^ | | * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | € | £ | $ | | | | | | | ß | | + * | € | £ | ¤ | ² | | | | ° | µ | ß | | * `----------------------------------' `----------------------------------' * ,-------------. ,-------------. * | | | | | | @@ -95,20 +77,20 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { // SYMBOLS [SYMB] = LAYOUT_ergodox( // left hand - M(0), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, - KC_TRNS,FR_SECT,FR_LABK, FR_LCBR,FR_BSLS,FR_TILD,KC_TRNS, - KC_TRNS,FR_QUOT,FR_EQL, FR_MINS,FR_LPRN,FR_PLUS, - KC_TRNS,FR_GRV,FR_QUES,FR_HASH,FR_LBRC,FR_PIPE,KC_TRNS, - FR_EURO,FR_PND,FR_DLR,KC_TRNS,KC_TRNS, + M(0), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_TRNS, + KC_TRNS, FR_SECT, FR_LABK, FR_LCBR, FR_BSLS, FR_TILD, KC_TRNS, + KC_TRNS, FR_QUOT, FR_EQL, FR_MINS, FR_LPRN, FR_PLUS, + KC_TRNS, FR_GRV, FR_QUES, FR_HASH, FR_LBRC, FR_PIPE, KC_TRNS, + FR_EURO, FR_PND, FR_CURR, FR_SUP2, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, // right hand - KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, - KC_TRNS, FR_PERC, FR_AT, FR_RCBR, FR_RABK, FR_MICR, KC_F12, - FR_ASTR, FR_RPRN, FR_UNDS, FR_SLSH, FR_DQUO, KC_TRNS, - KC_TRNS, FR_AMPR, FR_RBRC, FR_DLR, FR_EXLM, FR_CIRC, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, ALGR(KC_S), KC_TRNS, + KC_TRNS, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_TRNS, FR_PERC, FR_AT, FR_RCBR, FR_RABK, FR_DIAE, KC_F12, + FR_ASTR, FR_RPRN, FR_UNDS, FR_SLSH, FR_DQUO, KC_TRNS, + KC_TRNS, FR_AMPR, FR_RBRC, FR_DLR, FR_EXLM, FR_CIRC, KC_TRNS, + KC_TRNS, FR_DEG, FR_MICR, ALGR(KC_S), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS @@ -154,178 +136,6 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_WBAK ), - -/* Keymap 3: accented characters - * - * ,--------------------------------------------------. ,--------------------------------------------------. - * | | | | | | | | | | | | | | | | - * |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------| - * | | | à | â | ä | | | | | | | î | ï | | | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | é | è | ê | ë | |------| |------| | | ô | ö | | | - * |--------+------+------+------+------+------| | | |------+------+------+------+------+--------| - * | | | ù | û | ü | | | | | | | ŷ | ÿ | | | - * `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------' - * | | | | | | | | | | | | - * `----------------------------------' `----------------------------------' - * ,-------------. ,-------------. - * | | | | | | - * ,------|------|------| |------+------+------. - * | | | | | | | | - * | | |------| |------| | | - * | | | | | | | | - * `--------------------' `--------------------' - */ -// ACCENTED CHARACTERS -[ACC] = LAYOUT_ergodox( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - - KC_TRNS, KC_TRNS, FR_AGRV, M(M_ACIRC), M(M_AUMLT), KC_TRNS, KC_TRNS, - KC_TRNS, FR_EACU, FR_EGRV, M(M_ECIRC), M(M_EUMLT), KC_TRNS, - KC_TRNS, KC_TRNS, FR_UGRV, M(M_UCIRC), M(M_UUMLT), KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, - KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, - // right hand - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, M(M_ICIRC), M(M_IUMLT), KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, M(M_OCIRC), M(M_OUMLT), KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, M(M_YCIRC), M(M_YUMLT), KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, - KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS -), -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) -{ - // MACRODOWN only works in this function - switch(id) { - case QCOPY: - if (record->event.pressed) { - return MACRO(I(255), - D(LCTRL), - T(C), - D(LSFT), - T(C), - U(LCTRL), - U(LSFT), - END); - } - break; - case QPASTE: - if (record->event.pressed) { - return MACRO(I(255), - D(LCTRL), - D(LSFT), - T(V), - U(LCTRL), - T(INS), - U(LSFT), - END); - } - break; - case M_ACIRC: - if (record->event.pressed) { - return MACRO(T(LBRC), // FR_CIRC - T(Q), // FR_A - END); - } - break; - case M_ECIRC: - if (record->event.pressed) { - return MACRO(T(LBRC), // FR_CIRC - T(E), - END); - } - break; - case M_UCIRC: - if (record->event.pressed) { - return MACRO(T(LBRC), // FR_CIRC - T(U), - END); - } - break; - case M_ICIRC: - if (record->event.pressed) { - return MACRO(T(LBRC), // FR_CIRC - T(I), - END); - } - break; - case M_OCIRC: - if (record->event.pressed) { - return MACRO(T(LBRC), // FR_CIRC - T(O), - END); - } - break; - case M_YCIRC: - if (record->event.pressed) { - return MACRO(T(LBRC), // FR_CIRC - T(Y), - END); - } - break; - case M_AUMLT: - if (record->event.pressed) { - return MACRO(D(LSFT), - T(LBRC), - U(LSFT), - T(Q), - END); - } - break; - case M_EUMLT: - if (record->event.pressed) { - return MACRO(D(LSFT), - T(LBRC), - U(LSFT), - T(E), - END); - } - break; - case M_UUMLT: - if (record->event.pressed) { - return MACRO(D(LSFT), - T(LBRC), - U(LSFT), - T(U), - END); - } - break; - case M_IUMLT: - if (record->event.pressed) { - return MACRO(D(LSFT), - T(LBRC), - U(LSFT), - T(I), - END); - } - break; - case M_OUMLT: - if (record->event.pressed) { - return MACRO(D(LSFT), - T(LBRC), - U(LSFT), - T(O), - END); - } - break; - case M_YUMLT: - if (record->event.pressed) { - return MACRO(D(LSFT), - T(LBRC), - U(LSFT), - T(Y), - END); - } - break; - - } - return MACRO_NONE; }; // Runs just one time when the keyboard initializes. @@ -350,9 +160,6 @@ void matrix_scan_user(void) { case MDIA: ergodox_right_led_2_on(); break; - case ACC: - ergodox_right_led_3_on(); - break; default: // none break; diff --git a/layouts/community/ergodox/french_hacker/readme.md b/layouts/community/ergodox/french_hacker/readme.md index 6b0575af13..829013597a 100644 --- a/layouts/community/ergodox/french_hacker/readme.md +++ b/layouts/community/ergodox/french_hacker/readme.md @@ -1,30 +1,27 @@ # French hacker layout -## Introduction - [Colemak Mod-DH](https://colemakmods.github.io/mod-dh/) layout for users keeping an `azerty` layout configuration on their OS. +## Introduction + This keymap is for users keeping their operating systems configured with -`azerty` - for typing passwords or in their native languages - but who -wants a Colemak Mod-DH layout on their mechanical. +`azerty` - for typing passwords in their native languages, or for their laptop +keyboard - but who wants a Colemak Mod-DH layout on their mechanical keyboard. The symbols layers was done after analysing various programming languages sources codes and should be close to optimal for typing -confort. - -Special macros for [Qubes OS](https://www.qubes-os.org/) are included. - -There is an accented characters layer for infrequent typing of french -accents. +confort, see the link at the end of the README. -Special macros for [Qubes OS](https://www.qubes-os.org/) are included. +The design is done to minimize the usage of the pinky fingers and reduces stress +on the hands, thus Alt and Ctrl keys are accessible for both hands. -## Build +## Flashing the firmware - cd keyboards/ergodox - make french_hacker +``` +qmk flash -kb ergodox_ez -km french_hacker +``` ## Design explanations -See my [blog post](http://dialectical-computing.de/blog/blog/2017/01/29/a-better-coder-layout-for-the-ergodox-ez-keyboard/). +See my [blog post](http://www.dialectical-computing.de/blog/blog/2017/01/29/a-better-coder-layout-for-the-ergodox-ez-keyboard/). From 42af494f8eb5587d425fda4d3ed54b7fd0773a68 Mon Sep 17 00:00:00 2001 From: mizuhof Date: Sat, 6 Nov 2021 03:41:52 +0900 Subject: [PATCH 444/595] [Keymap] add keymap for xd60 (#15053) Co-authored-by: Ryan --- .../ansi_split_bs_rshift_space/keymap.c | 33 +++++++++++++++++++ .../ansi_split_bs_rshift_space/readme.md | 13 ++++++++ keyboards/xiudi/xd60/xd60.h | 14 ++++++++ 3 files changed, 60 insertions(+) create mode 100644 keyboards/xiudi/xd60/keymaps/ansi_split_bs_rshift_space/keymap.c create mode 100644 keyboards/xiudi/xd60/keymaps/ansi_split_bs_rshift_space/readme.md diff --git a/keyboards/xiudi/xd60/keymaps/ansi_split_bs_rshift_space/keymap.c b/keyboards/xiudi/xd60/keymaps/ansi_split_bs_rshift_space/keymap.c new file mode 100644 index 0000000000..e630851db5 --- /dev/null +++ b/keyboards/xiudi/xd60/keymaps/ansi_split_bs_rshift_space/keymap.c @@ -0,0 +1,33 @@ +/* Copyright 2021 mizuho1998 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_60_ansi_split_bs_rshift_space( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, + KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_DEL, + KC_LCTL, KC_LGUI, KC_LALT, KC_LSFT, KC_SPC, KC_ESC, KC_RGUI, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT + ), + [1] = LAYOUT_60_ansi_split_bs_rshift_space( + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_F14, + KC_NO, KC_WH_U, KC_UP, KC_WH_D, KC_BSPC,KC_HOME,KC_CALC,KC_NO, KC_INS, KC_NO, KC_PSCR, KC_SLCK, KC_PAUS, KC_DEL, + KC_NO, KC_LEFT, KC_DOWN, KC_RIGHT,KC_DEL, KC_END, KC_PGDN,KC_NO, KC_NO, KC_NO, KC_HOME, KC_PGUP, KC_NO, KC_ENT, + KC_LSFT, KC_NO, KC_NO, KC_APP, BL_STEP,KC_NO, KC_NO, KC_VOLD,KC_VOLU,KC_MUTE, KC_END, KC_PGDN, KC_RSFT, KC_PGUP, KC_INS, + KC_LCTL, KC_LGUI, KC_LALT, KC_LSFT, KC_SPC, KC_ESC, KC_RGUI, MO(1), KC_HOME, KC_PGDOWN,KC_END + ) +}; diff --git a/keyboards/xiudi/xd60/keymaps/ansi_split_bs_rshift_space/readme.md b/keyboards/xiudi/xd60/keymaps/ansi_split_bs_rshift_space/readme.md new file mode 100644 index 0000000000..56f384f436 --- /dev/null +++ b/keyboards/xiudi/xd60/keymaps/ansi_split_bs_rshift_space/readme.md @@ -0,0 +1,13 @@ +# Split Space Keymap for XIUDI's 60% XD60 PCB + +![Split Space Keymap for XD60](https://user-images.githubusercontent.com/39789796/140330345-2ccde096-dad5-49d0-b8a7-b231180018e6.png) + + +* Keyboard Maintainer: [mizuho1998](https://github.com/mizuho1998) +* Hardware Supported: xd60 PCB rev3 + +Make example for this keyboard (after setting up your build environment): + + make xiudi/xd60/rev3:ansi_split_bs_rshift_space + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/xiudi/xd60/xd60.h b/keyboards/xiudi/xd60/xd60.h index dc6a1080f9..cf698adcc1 100644 --- a/keyboards/xiudi/xd60/xd60.h +++ b/keyboards/xiudi/xd60/xd60.h @@ -60,6 +60,20 @@ inline void xd60_bl_led_off(void) { DDRF &= ~(1<<5); PORTF &= ~(1<<5); } { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, K49, K4A, K4B, K4C, K4D } \ } +#define LAYOUT_60_ansi_split_bs_rshift_space( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K49, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K47, K3D, K3C, \ + K40, K41, K42, K46, K45, K44, K4A, K4B, K48, K4C, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \ + { K40, K41, K42, KC_NO, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D } \ +} + #define LAYOUT_60_iso( \ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, \ From 7562c5ba1657a5484256ba133069aeea8b8b8bd0 Mon Sep 17 00:00:00 2001 From: peepeetee <43021794+peepeetee@users.noreply.github.com> Date: Sat, 6 Nov 2021 02:42:07 +0800 Subject: [PATCH 445/595] Update updated KPrepublic boards to be prepared for the update (#15040) --- keyboards/kprepublic/bm60poker/readme.md | 2 +- keyboards/kprepublic/bm60poker/{ => rev1}/bm60poker.c | 0 keyboards/kprepublic/bm60poker/{ => rev1}/bm60poker.h | 0 keyboards/kprepublic/bm60poker/{ => rev1}/config.h | 0 keyboards/kprepublic/bm60poker/{ => rev1}/info.json | 0 keyboards/kprepublic/bm60poker/{ => rev1}/rules.mk | 0 keyboards/kprepublic/bm60rgb/readme.md | 2 +- keyboards/kprepublic/bm60rgb/{ => rev1}/bm60rgb.c | 0 keyboards/kprepublic/bm60rgb/{ => rev1}/bm60rgb.h | 0 keyboards/kprepublic/bm60rgb/{ => rev1}/config.h | 0 keyboards/kprepublic/bm60rgb/{ => rev1}/info.json | 0 keyboards/kprepublic/bm60rgb/{ => rev1}/rules.mk | 0 keyboards/kprepublic/bm60rgb_iso/readme.md | 2 +- keyboards/kprepublic/bm60rgb_iso/{ => rev1}/bm60rgb_iso.c | 0 keyboards/kprepublic/bm60rgb_iso/{ => rev1}/bm60rgb_iso.h | 0 keyboards/kprepublic/bm60rgb_iso/{ => rev1}/config.h | 0 keyboards/kprepublic/bm60rgb_iso/{ => rev1}/info.json | 0 keyboards/kprepublic/bm60rgb_iso/{ => rev1}/rules.mk | 0 keyboards/kprepublic/bm65rgb/readme.md | 4 ++-- 19 files changed, 5 insertions(+), 5 deletions(-) rename keyboards/kprepublic/bm60poker/{ => rev1}/bm60poker.c (100%) rename keyboards/kprepublic/bm60poker/{ => rev1}/bm60poker.h (100%) rename keyboards/kprepublic/bm60poker/{ => rev1}/config.h (100%) rename keyboards/kprepublic/bm60poker/{ => rev1}/info.json (100%) rename keyboards/kprepublic/bm60poker/{ => rev1}/rules.mk (100%) rename keyboards/kprepublic/bm60rgb/{ => rev1}/bm60rgb.c (100%) rename keyboards/kprepublic/bm60rgb/{ => rev1}/bm60rgb.h (100%) rename keyboards/kprepublic/bm60rgb/{ => rev1}/config.h (100%) rename keyboards/kprepublic/bm60rgb/{ => rev1}/info.json (100%) rename keyboards/kprepublic/bm60rgb/{ => rev1}/rules.mk (100%) rename keyboards/kprepublic/bm60rgb_iso/{ => rev1}/bm60rgb_iso.c (100%) rename keyboards/kprepublic/bm60rgb_iso/{ => rev1}/bm60rgb_iso.h (100%) rename keyboards/kprepublic/bm60rgb_iso/{ => rev1}/config.h (100%) rename keyboards/kprepublic/bm60rgb_iso/{ => rev1}/info.json (100%) rename keyboards/kprepublic/bm60rgb_iso/{ => rev1}/rules.mk (100%) diff --git a/keyboards/kprepublic/bm60poker/readme.md b/keyboards/kprepublic/bm60poker/readme.md index b276a15555..6b60853885 100644 --- a/keyboards/kprepublic/bm60poker/readme.md +++ b/keyboards/kprepublic/bm60poker/readme.md @@ -8,6 +8,6 @@ A 60% hotswap inswitch RGB (north facing) keyboard from KP Republic. Make example for this keyboard (after setting up your build environment): - make kprepublic/bm60poker:default + make kprepublic/bm60poker/rev1:default See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/kprepublic/bm60poker/bm60poker.c b/keyboards/kprepublic/bm60poker/rev1/bm60poker.c similarity index 100% rename from keyboards/kprepublic/bm60poker/bm60poker.c rename to keyboards/kprepublic/bm60poker/rev1/bm60poker.c diff --git a/keyboards/kprepublic/bm60poker/bm60poker.h b/keyboards/kprepublic/bm60poker/rev1/bm60poker.h similarity index 100% rename from keyboards/kprepublic/bm60poker/bm60poker.h rename to keyboards/kprepublic/bm60poker/rev1/bm60poker.h diff --git a/keyboards/kprepublic/bm60poker/config.h b/keyboards/kprepublic/bm60poker/rev1/config.h similarity index 100% rename from keyboards/kprepublic/bm60poker/config.h rename to keyboards/kprepublic/bm60poker/rev1/config.h diff --git a/keyboards/kprepublic/bm60poker/info.json b/keyboards/kprepublic/bm60poker/rev1/info.json similarity index 100% rename from keyboards/kprepublic/bm60poker/info.json rename to keyboards/kprepublic/bm60poker/rev1/info.json diff --git a/keyboards/kprepublic/bm60poker/rules.mk b/keyboards/kprepublic/bm60poker/rev1/rules.mk similarity index 100% rename from keyboards/kprepublic/bm60poker/rules.mk rename to keyboards/kprepublic/bm60poker/rev1/rules.mk diff --git a/keyboards/kprepublic/bm60rgb/readme.md b/keyboards/kprepublic/bm60rgb/readme.md index d0d5ff1a41..2a41d7eaaf 100644 --- a/keyboards/kprepublic/bm60rgb/readme.md +++ b/keyboards/kprepublic/bm60rgb/readme.md @@ -8,6 +8,6 @@ A 60% hotswap inswitch RGB keyboard from KP Republic. Make example for this keyboard (after setting up your build environment): - make kprepublic/bm60rgb:default + make kprepublic/bm60rgb/rev1:default See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/kprepublic/bm60rgb/bm60rgb.c b/keyboards/kprepublic/bm60rgb/rev1/bm60rgb.c similarity index 100% rename from keyboards/kprepublic/bm60rgb/bm60rgb.c rename to keyboards/kprepublic/bm60rgb/rev1/bm60rgb.c diff --git a/keyboards/kprepublic/bm60rgb/bm60rgb.h b/keyboards/kprepublic/bm60rgb/rev1/bm60rgb.h similarity index 100% rename from keyboards/kprepublic/bm60rgb/bm60rgb.h rename to keyboards/kprepublic/bm60rgb/rev1/bm60rgb.h diff --git a/keyboards/kprepublic/bm60rgb/config.h b/keyboards/kprepublic/bm60rgb/rev1/config.h similarity index 100% rename from keyboards/kprepublic/bm60rgb/config.h rename to keyboards/kprepublic/bm60rgb/rev1/config.h diff --git a/keyboards/kprepublic/bm60rgb/info.json b/keyboards/kprepublic/bm60rgb/rev1/info.json similarity index 100% rename from keyboards/kprepublic/bm60rgb/info.json rename to keyboards/kprepublic/bm60rgb/rev1/info.json diff --git a/keyboards/kprepublic/bm60rgb/rules.mk b/keyboards/kprepublic/bm60rgb/rev1/rules.mk similarity index 100% rename from keyboards/kprepublic/bm60rgb/rules.mk rename to keyboards/kprepublic/bm60rgb/rev1/rules.mk diff --git a/keyboards/kprepublic/bm60rgb_iso/readme.md b/keyboards/kprepublic/bm60rgb_iso/readme.md index fec112650e..a39a0b3743 100644 --- a/keyboards/kprepublic/bm60rgb_iso/readme.md +++ b/keyboards/kprepublic/bm60rgb_iso/readme.md @@ -10,7 +10,7 @@ A 60% ISO hotswap inswitch RGB keyboard. Make example for this keyboard (after setting up your build environment): - make kprepublic/bm60rgb_iso:default + make kprepublic/bm60rgb_iso/rev1:default Flashing example for this keyboard: diff --git a/keyboards/kprepublic/bm60rgb_iso/bm60rgb_iso.c b/keyboards/kprepublic/bm60rgb_iso/rev1/bm60rgb_iso.c similarity index 100% rename from keyboards/kprepublic/bm60rgb_iso/bm60rgb_iso.c rename to keyboards/kprepublic/bm60rgb_iso/rev1/bm60rgb_iso.c diff --git a/keyboards/kprepublic/bm60rgb_iso/bm60rgb_iso.h b/keyboards/kprepublic/bm60rgb_iso/rev1/bm60rgb_iso.h similarity index 100% rename from keyboards/kprepublic/bm60rgb_iso/bm60rgb_iso.h rename to keyboards/kprepublic/bm60rgb_iso/rev1/bm60rgb_iso.h diff --git a/keyboards/kprepublic/bm60rgb_iso/config.h b/keyboards/kprepublic/bm60rgb_iso/rev1/config.h similarity index 100% rename from keyboards/kprepublic/bm60rgb_iso/config.h rename to keyboards/kprepublic/bm60rgb_iso/rev1/config.h diff --git a/keyboards/kprepublic/bm60rgb_iso/info.json b/keyboards/kprepublic/bm60rgb_iso/rev1/info.json similarity index 100% rename from keyboards/kprepublic/bm60rgb_iso/info.json rename to keyboards/kprepublic/bm60rgb_iso/rev1/info.json diff --git a/keyboards/kprepublic/bm60rgb_iso/rules.mk b/keyboards/kprepublic/bm60rgb_iso/rev1/rules.mk similarity index 100% rename from keyboards/kprepublic/bm60rgb_iso/rules.mk rename to keyboards/kprepublic/bm60rgb_iso/rev1/rules.mk diff --git a/keyboards/kprepublic/bm65rgb/readme.md b/keyboards/kprepublic/bm65rgb/readme.md index 3a87afabf1..119d05d20e 100644 --- a/keyboards/kprepublic/bm65rgb/readme.md +++ b/keyboards/kprepublic/bm65rgb/readme.md @@ -10,11 +10,11 @@ A 65% hotswap in switch RGB keyboard from KPRepublic. Make example for this keyboard (after setting up your build environment): - make kprepublic/bm65rgb:default + make kprepublic/bm65rgb/rev1:default Flashing example for this keyboard: - make kprepublic/bm65rgb:default:flash + make kprepublic/bm65rgb/rev1:default:flash To reset the board into bootloader mode, do one of the following: From 058248e28c6433266945b821f8c23e44968abfb2 Mon Sep 17 00:00:00 2001 From: kb-elmo Date: Fri, 5 Nov 2021 19:48:49 +0100 Subject: [PATCH 446/595] [Keyboard] Add Ziggurat keyboard (#15008) Co-authored-by: Ryan --- keyboards/ziggurat/config.h | 46 +++ keyboards/ziggurat/info.json | 414 ++++++++++++++++++++ keyboards/ziggurat/keymaps/default/keymap.c | 33 ++ keyboards/ziggurat/keymaps/iso/keymap.c | 33 ++ keyboards/ziggurat/keymaps/via/keymap.c | 47 +++ keyboards/ziggurat/keymaps/via/rules.mk | 1 + keyboards/ziggurat/readme.md | 25 ++ keyboards/ziggurat/rules.mk | 21 + keyboards/ziggurat/ziggurat.c | 17 + keyboards/ziggurat/ziggurat.h | 91 +++++ 10 files changed, 728 insertions(+) create mode 100644 keyboards/ziggurat/config.h create mode 100644 keyboards/ziggurat/info.json create mode 100644 keyboards/ziggurat/keymaps/default/keymap.c create mode 100644 keyboards/ziggurat/keymaps/iso/keymap.c create mode 100644 keyboards/ziggurat/keymaps/via/keymap.c create mode 100644 keyboards/ziggurat/keymaps/via/rules.mk create mode 100644 keyboards/ziggurat/readme.md create mode 100644 keyboards/ziggurat/rules.mk create mode 100644 keyboards/ziggurat/ziggurat.c create mode 100644 keyboards/ziggurat/ziggurat.h diff --git a/keyboards/ziggurat/config.h b/keyboards/ziggurat/config.h new file mode 100644 index 0000000000..9c38f5e796 --- /dev/null +++ b/keyboards/ziggurat/config.h @@ -0,0 +1,46 @@ +/* +Copyright 2021 kb-elmo + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x8F5D +#define PRODUCT_ID 0x5258 +#define DEVICE_VER 0x0001 +#define MANUFACTURER LaminarWoob +#define PRODUCT Ziggurat + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 18 + +/* Keyboard Matrix Assignments */ +#define MATRIX_ROW_PINS { A2, A1, A0, F7, A3 } +#define MATRIX_COL_PINS { F6, F5, F4, F3, F2, F1, B5, B6, C2, C3, C4, C5, C6, C7, A7, A6, A5, A4 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION diff --git a/keyboards/ziggurat/info.json b/keyboards/ziggurat/info.json new file mode 100644 index 0000000000..77bb288dd6 --- /dev/null +++ b/keyboards/ziggurat/info.json @@ -0,0 +1,414 @@ +{ + "keyboard_name": "ziggurat", + "url": "", + "maintainer": "kb-elmo", + "layouts": { + "LAYOUT_all": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2.5, "y":0}, + {"x":3.5, "y":0}, + {"x":4.5, "y":0}, + {"x":5.5, "y":0}, + {"x":6.5, "y":0}, + {"x":7.5, "y":0}, + {"x":8.5, "y":0}, + {"x":9.5, "y":0}, + {"x":10.5, "y":0}, + {"x":11.5, "y":0}, + {"x":12.5, "y":0}, + {"x":13.5, "y":0}, + {"x":14.5, "y":0}, + {"x":15.5, "y":0}, + {"x":16.5, "y":0}, + {"x":17.5, "y":0}, + {"x":0, "y":1}, + {"x":1, "y":1}, + {"x":2.5, "y":1, "w":1.5}, + {"x":4, "y":1}, + {"x":5, "y":1}, + {"x":6, "y":1}, + {"x":7, "y":1}, + {"x":8, "y":1}, + {"x":9, "y":1}, + {"x":10, "y":1}, + {"x":11, "y":1}, + {"x":12, "y":1}, + {"x":13, "y":1}, + {"x":14, "y":1}, + {"x":15, "y":1}, + {"x":16, "y":1, "w":1.5}, + {"x":17.5, "y":1}, + {"x":0, "y":2}, + {"x":1, "y":2}, + {"x":2.5, "y":2, "w":1.75}, + {"x":4.25, "y":2}, + {"x":5.25, "y":2}, + {"x":6.25, "y":2}, + {"x":7.25, "y":2}, + {"x":8.25, "y":2}, + {"x":9.25, "y":2}, + {"x":10.25, "y":2}, + {"x":11.25, "y":2}, + {"x":12.25, "y":2}, + {"x":13.25, "y":2}, + {"x":14.25, "y":2}, + {"x":15.25, "y":2, "w":2.25}, + {"x":17.5, "y":2}, + {"x":0, "y":3}, + {"x":1, "y":3}, + {"x":2.5, "y":3, "w":1.25}, + {"x":3.75, "y":3}, + {"x":4.75, "y":3}, + {"x":5.75, "y":3}, + {"x":6.75, "y":3}, + {"x":7.75, "y":3}, + {"x":8.75, "y":3}, + {"x":9.75, "y":3}, + {"x":10.75, "y":3}, + {"x":11.75, "y":3}, + {"x":12.75, "y":3}, + {"x":13.75, "y":3}, + {"x":14.75, "y":3, "w":1.75}, + {"x":16.5, "y":3}, + {"x":17.5, "y":3}, + {"x":0, "y":4}, + {"x":1, "y":4}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":1.25}, + {"x":5, "y":4, "w":1.25}, + {"x":6.25, "y":4, "w":6.25}, + {"x":12.5, "y":4, "w":1.25}, + {"x":13.75, "y":4, "w":1.25}, + {"x":15.5, "y":4}, + {"x":16.5, "y":4}, + {"x":17.5, "y":4} + ] + }, + "LAYOUT_ansi": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2.5, "y":0}, + {"x":3.5, "y":0}, + {"x":4.5, "y":0}, + {"x":5.5, "y":0}, + {"x":6.5, "y":0}, + {"x":7.5, "y":0}, + {"x":8.5, "y":0}, + {"x":9.5, "y":0}, + {"x":10.5, "y":0}, + {"x":11.5, "y":0}, + {"x":12.5, "y":0}, + {"x":13.5, "y":0}, + {"x":14.5, "y":0}, + {"x":15.5, "y":0, "w":2}, + {"x":17.5, "y":0}, + {"x":0, "y":1}, + {"x":1, "y":1}, + {"x":2.5, "y":1, "w":1.5}, + {"x":4, "y":1}, + {"x":5, "y":1}, + {"x":6, "y":1}, + {"x":7, "y":1}, + {"x":8, "y":1}, + {"x":9, "y":1}, + {"x":10, "y":1}, + {"x":11, "y":1}, + {"x":12, "y":1}, + {"x":13, "y":1}, + {"x":14, "y":1}, + {"x":15, "y":1}, + {"x":16, "y":1, "w":1.5}, + {"x":17.5, "y":1}, + {"x":0, "y":2}, + {"x":1, "y":2}, + {"x":2.5, "y":2, "w":1.75}, + {"x":4.25, "y":2}, + {"x":5.25, "y":2}, + {"x":6.25, "y":2}, + {"x":7.25, "y":2}, + {"x":8.25, "y":2}, + {"x":9.25, "y":2}, + {"x":10.25, "y":2}, + {"x":11.25, "y":2}, + {"x":12.25, "y":2}, + {"x":13.25, "y":2}, + {"x":14.25, "y":2}, + {"x":15.25, "y":2, "w":2.25}, + {"x":17.5, "y":2}, + {"x":0, "y":3}, + {"x":1, "y":3}, + {"x":2.5, "y":3, "w":2.25}, + {"x":4.75, "y":3}, + {"x":5.75, "y":3}, + {"x":6.75, "y":3}, + {"x":7.75, "y":3}, + {"x":8.75, "y":3}, + {"x":9.75, "y":3}, + {"x":10.75, "y":3}, + {"x":11.75, "y":3}, + {"x":12.75, "y":3}, + {"x":13.75, "y":3}, + {"x":14.75, "y":3, "w":1.75}, + {"x":16.5, "y":3}, + {"x":17.5, "y":3}, + {"x":0, "y":4}, + {"x":1, "y":4}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":1.25}, + {"x":5, "y":4, "w":1.25}, + {"x":6.25, "y":4, "w":6.25}, + {"x":12.5, "y":4, "w":1.25}, + {"x":13.75, "y":4, "w":1.25}, + {"x":15.5, "y":4}, + {"x":16.5, "y":4}, + {"x":17.5, "y":4} + ] + }, + "LAYOUT_ansi_tsangan": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2.5, "y":0}, + {"x":3.5, "y":0}, + {"x":4.5, "y":0}, + {"x":5.5, "y":0}, + {"x":6.5, "y":0}, + {"x":7.5, "y":0}, + {"x":8.5, "y":0}, + {"x":9.5, "y":0}, + {"x":10.5, "y":0}, + {"x":11.5, "y":0}, + {"x":12.5, "y":0}, + {"x":13.5, "y":0}, + {"x":14.5, "y":0}, + {"x":15.5, "y":0, "w":2}, + {"x":17.5, "y":0}, + {"x":0, "y":1}, + {"x":1, "y":1}, + {"x":2.5, "y":1, "w":1.5}, + {"x":4, "y":1}, + {"x":5, "y":1}, + {"x":6, "y":1}, + {"x":7, "y":1}, + {"x":8, "y":1}, + {"x":9, "y":1}, + {"x":10, "y":1}, + {"x":11, "y":1}, + {"x":12, "y":1}, + {"x":13, "y":1}, + {"x":14, "y":1}, + {"x":15, "y":1}, + {"x":16, "y":1, "w":1.5}, + {"x":17.5, "y":1}, + {"x":0, "y":2}, + {"x":1, "y":2}, + {"x":2.5, "y":2, "w":1.75}, + {"x":4.25, "y":2}, + {"x":5.25, "y":2}, + {"x":6.25, "y":2}, + {"x":7.25, "y":2}, + {"x":8.25, "y":2}, + {"x":9.25, "y":2}, + {"x":10.25, "y":2}, + {"x":11.25, "y":2}, + {"x":12.25, "y":2}, + {"x":13.25, "y":2}, + {"x":14.25, "y":2}, + {"x":15.25, "y":2, "w":2.25}, + {"x":17.5, "y":2}, + {"x":0, "y":3}, + {"x":1, "y":3}, + {"x":2.5, "y":3, "w":2.25}, + {"x":4.75, "y":3}, + {"x":5.75, "y":3}, + {"x":6.75, "y":3}, + {"x":7.75, "y":3}, + {"x":8.75, "y":3}, + {"x":9.75, "y":3}, + {"x":10.75, "y":3}, + {"x":11.75, "y":3}, + {"x":12.75, "y":3}, + {"x":13.75, "y":3}, + {"x":14.75, "y":3, "w":1.75}, + {"x":16.5, "y":3}, + {"x":17.5, "y":3}, + {"x":0, "y":4}, + {"x":1, "y":4}, + {"x":2.5, "y":4, "w":1.5}, + {"x":4, "y":4}, + {"x":5, "y":4, "w":1.5}, + {"x":6.5, "y":4, "w":7}, + {"x":13.5, "y":4, "w":1.5}, + {"x":15.5, "y":4}, + {"x":16.5, "y":4}, + {"x":17.5, "y":4} + ] + }, + "LAYOUT_iso": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2.5, "y":0}, + {"x":3.5, "y":0}, + {"x":4.5, "y":0}, + {"x":5.5, "y":0}, + {"x":6.5, "y":0}, + {"x":7.5, "y":0}, + {"x":8.5, "y":0}, + {"x":9.5, "y":0}, + {"x":10.5, "y":0}, + {"x":11.5, "y":0}, + {"x":12.5, "y":0}, + {"x":13.5, "y":0}, + {"x":14.5, "y":0}, + {"x":15.5, "y":0, "w":2}, + {"x":17.5, "y":0}, + {"x":0, "y":1}, + {"x":1, "y":1}, + {"x":2.5, "y":1, "w":1.5}, + {"x":4, "y":1}, + {"x":5, "y":1}, + {"x":6, "y":1}, + {"x":7, "y":1}, + {"x":8, "y":1}, + {"x":9, "y":1}, + {"x":10, "y":1}, + {"x":11, "y":1}, + {"x":12, "y":1}, + {"x":13, "y":1}, + {"x":14, "y":1}, + {"x":15, "y":1}, + {"x":17.5, "y":1}, + {"x":0, "y":2}, + {"x":1, "y":2}, + {"x":2.5, "y":2, "w":1.75}, + {"x":4.25, "y":2}, + {"x":5.25, "y":2}, + {"x":6.25, "y":2}, + {"x":7.25, "y":2}, + {"x":8.25, "y":2}, + {"x":9.25, "y":2}, + {"x":10.25, "y":2}, + {"x":11.25, "y":2}, + {"x":12.25, "y":2}, + {"x":13.25, "y":2}, + {"x":14.25, "y":2}, + {"x":15.25, "y":2}, + {"x":16.25, "y":1, "w":1.25, "h":2}, + {"x":17.5, "y":2}, + {"x":0, "y":3}, + {"x":1, "y":3}, + {"x":2.5, "y":3, "w":1.25}, + {"x":3.75, "y":3}, + {"x":4.75, "y":3}, + {"x":5.75, "y":3}, + {"x":6.75, "y":3}, + {"x":7.75, "y":3}, + {"x":8.75, "y":3}, + {"x":9.75, "y":3}, + {"x":10.75, "y":3}, + {"x":11.75, "y":3}, + {"x":12.75, "y":3}, + {"x":13.75, "y":3}, + {"x":14.75, "y":3, "w":1.75}, + {"x":16.5, "y":3}, + {"x":17.5, "y":3}, + {"x":0, "y":4}, + {"x":1, "y":4}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":1.25}, + {"x":5, "y":4, "w":1.25}, + {"x":6.25, "y":4, "w":6.25}, + {"x":12.5, "y":4, "w":1.25}, + {"x":13.75, "y":4, "w":1.25}, + {"x":15.5, "y":4}, + {"x":16.5, "y":4}, + {"x":17.5, "y":4} + ] + }, + "LAYOUT_iso_tsangan": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2.5, "y":0}, + {"x":3.5, "y":0}, + {"x":4.5, "y":0}, + {"x":5.5, "y":0}, + {"x":6.5, "y":0}, + {"x":7.5, "y":0}, + {"x":8.5, "y":0}, + {"x":9.5, "y":0}, + {"x":10.5, "y":0}, + {"x":11.5, "y":0}, + {"x":12.5, "y":0}, + {"x":13.5, "y":0}, + {"x":14.5, "y":0}, + {"x":15.5, "y":0, "w":2}, + {"x":17.5, "y":0}, + {"x":0, "y":1}, + {"x":1, "y":1}, + {"x":2.5, "y":1, "w":1.5}, + {"x":4, "y":1}, + {"x":5, "y":1}, + {"x":6, "y":1}, + {"x":7, "y":1}, + {"x":8, "y":1}, + {"x":9, "y":1}, + {"x":10, "y":1}, + {"x":11, "y":1}, + {"x":12, "y":1}, + {"x":13, "y":1}, + {"x":14, "y":1}, + {"x":15, "y":1}, + {"x":17.5, "y":1}, + {"x":0, "y":2}, + {"x":1, "y":2}, + {"x":2.5, "y":2, "w":1.75}, + {"x":4.25, "y":2}, + {"x":5.25, "y":2}, + {"x":6.25, "y":2}, + {"x":7.25, "y":2}, + {"x":8.25, "y":2}, + {"x":9.25, "y":2}, + {"x":10.25, "y":2}, + {"x":11.25, "y":2}, + {"x":12.25, "y":2}, + {"x":13.25, "y":2}, + {"x":14.25, "y":2}, + {"x":15.25, "y":2}, + {"x":16.25, "y":1, "w":1.25, "h":2}, + {"x":17.5, "y":2}, + {"x":0, "y":3}, + {"x":1, "y":3}, + {"x":2.5, "y":3, "w":1.25}, + {"x":3.75, "y":3}, + {"x":4.75, "y":3}, + {"x":5.75, "y":3}, + {"x":6.75, "y":3}, + {"x":7.75, "y":3}, + {"x":8.75, "y":3}, + {"x":9.75, "y":3}, + {"x":10.75, "y":3}, + {"x":11.75, "y":3}, + {"x":12.75, "y":3}, + {"x":13.75, "y":3}, + {"x":14.75, "y":3, "w":1.75}, + {"x":16.5, "y":3}, + {"x":17.5, "y":3}, + {"x":0, "y":4}, + {"x":1, "y":4}, + {"x":2.5, "y":4, "w":1.5}, + {"x":4, "y":4}, + {"x":5, "y":4, "w":1.5}, + {"x":6.5, "y":4, "w":7}, + {"x":13.5, "y":4, "w":1.5}, + {"x":15.5, "y":4}, + {"x":16.5, "y":4}, + {"x":17.5, "y":4} + ] + } + } +} diff --git a/keyboards/ziggurat/keymaps/default/keymap.c b/keyboards/ziggurat/keymaps/default/keymap.c new file mode 100644 index 0000000000..5a06fecca5 --- /dev/null +++ b/keyboards/ziggurat/keymaps/default/keymap.c @@ -0,0 +1,33 @@ +/* Copyright 2021 kb-elmo + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_ansi( + KC_F1, KC_F2, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, + KC_F3, KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_HOME, + KC_F5, KC_F6, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_F7, KC_F8, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_F9, KC_F10, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_ansi( + KC_TRNS, KC_TRNS, KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/ziggurat/keymaps/iso/keymap.c b/keyboards/ziggurat/keymaps/iso/keymap.c new file mode 100644 index 0000000000..c994adb55f --- /dev/null +++ b/keyboards/ziggurat/keymaps/iso/keymap.c @@ -0,0 +1,33 @@ +/* Copyright 2021 kb-elmo + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_iso( + KC_F1, KC_F2, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, + KC_F3, KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_HOME, + KC_F5, KC_F6, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_PGUP, + KC_F7, KC_F8, KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_F9, KC_F10, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_iso( + KC_TRNS, KC_TRNS, KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/ziggurat/keymaps/via/keymap.c b/keyboards/ziggurat/keymaps/via/keymap.c new file mode 100644 index 0000000000..92d3d80ed4 --- /dev/null +++ b/keyboards/ziggurat/keymaps/via/keymap.c @@ -0,0 +1,47 @@ +/* Copyright 2021 kb-elmo + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_all( + KC_F1, KC_F2, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_DEL, + KC_F3, KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_HOME, + KC_F5, KC_F6, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_F7, KC_F8, KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_F9, KC_F10, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/ziggurat/keymaps/via/rules.mk b/keyboards/ziggurat/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/ziggurat/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/ziggurat/readme.md b/keyboards/ziggurat/readme.md new file mode 100644 index 0000000000..85f88b5361 --- /dev/null +++ b/keyboards/ziggurat/readme.md @@ -0,0 +1,25 @@ +# Ziggurat + + + +An extended 65% keyboard + +* Keyboard Maintainer: [kb-elmo](https://github.com/kb-elmo) +* Hardware Supported: Ziggurat PCB +* Hardware Availability: future groupbuy + +Make example for this keyboard (after setting up your build environment): + + make ziggurat:default + +Flashing example for this keyboard: + + make ziggurat:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +* **Bootmagic reset**: Hold down the top left key and plug in the keyboard +* **Physical reset button**: Press the button labeled "SW1" on the back of the PCB +* **Keycode in layout**: Press the key mapped to `RESET` if it is available diff --git a/keyboards/ziggurat/rules.mk b/keyboards/ziggurat/rules.mk new file mode 100644 index 0000000000..98db987b2b --- /dev/null +++ b/keyboards/ziggurat/rules.mk @@ -0,0 +1,21 @@ +# MCU name +MCU = at90usb1286 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/ziggurat/ziggurat.c b/keyboards/ziggurat/ziggurat.c new file mode 100644 index 0000000000..11afa56b76 --- /dev/null +++ b/keyboards/ziggurat/ziggurat.c @@ -0,0 +1,17 @@ +/* Copyright 2021 kb-elmo + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "ziggurat.h" diff --git a/keyboards/ziggurat/ziggurat.h b/keyboards/ziggurat/ziggurat.h new file mode 100644 index 0000000000..9a8b51b998 --- /dev/null +++ b/keyboards/ziggurat/ziggurat.h @@ -0,0 +1,91 @@ +/* Copyright 2021 kb-elmo + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +#define ____ KC_NO + +#define LAYOUT_all( \ + k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k013, k014, k015, k016, k017, \ + k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, k114, k116, k117, \ + k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k212, k213, k215, k217, \ + k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, k314, k316, k317, \ + k400, k401, k402, k403, k404, k408, k412, k413, k415, k416, k417 \ +) { \ + { k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k013, k014, k015, k016, k017 }, \ + { k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, k114, ____, k116, k117 }, \ + { k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k212, k213, ____, k215, ____, k217 }, \ + { k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, k314, ____, k316, k317 }, \ + { k400, k401, k402, k403, k404, ____, ____, ____, k408, ____, ____, ____, k412, k413, ____, k415, k416, k417 }, \ +} + +#define LAYOUT_ansi( \ + k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k013, k014, k016, k017, \ + k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, k114, k116, k117, \ + k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k212, k213, k215, k217, \ + k300, k301, k302, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, k314, k316, k317, \ + k400, k401, k402, k403, k404, k408, k412, k413, k415, k416, k417 \ +) { \ + { k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k013, k014, ____, k016, k017 }, \ + { k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, k114, ____, k116, k117 }, \ + { k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k212, k213, ____, k215, ____, k217 }, \ + { k300, k301, k302, ____, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, k314, ____, k316, k317 }, \ + { k400, k401, k402, k403, k404, ____, ____, ____, k408, ____, ____, ____, k412, k413, ____, k415, k416, k417 }, \ +} + +#define LAYOUT_ansi_tsangan( \ + k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k013, k014, k016, k017, \ + k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, k114, k116, k117, \ + k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k212, k213, k215, k217, \ + k300, k301, k302, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, k314, k316, k317, \ + k400, k401, k402, k403, k404, k408, k413, k415, k416, k417 \ +) { \ + { k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k013, k014, ____, k016, k017 }, \ + { k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, k114, ____, k116, k117 }, \ + { k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k212, k213, ____, k215, ____, k217 }, \ + { k300, k301, k302, ____, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, k314, ____, k316, k317 }, \ + { k400, k401, k402, k403, k404, ____, ____, ____, k408, ____, ____, ____, ____, k413, ____, k415, k416, k417 }, \ +} + +#define LAYOUT_iso( \ + k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k013, k014, k016, k017, \ + k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, k114, k117, \ + k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k212, k213, k215, k116, k217, \ + k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, k314, k316, k317, \ + k400, k401, k402, k403, k404, k408, k412, k413, k415, k416, k417 \ +) { \ + { k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k013, k014, ____, k016, k017 }, \ + { k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, k114, ____, k116, k117 }, \ + { k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k212, k213, ____, k215, ____, k217 }, \ + { k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, k314, ____, k316, k317 }, \ + { k400, k401, k402, k403, k404, ____, ____, ____, k408, ____, ____, ____, k412, k413, ____, k415, k416, k417 }, \ +} + +#define LAYOUT_iso_tsangan( \ + k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k013, k014, k016, k017, \ + k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, k114, k117, \ + k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k212, k213, k215, k116, k217, \ + k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, k314, k316, k317, \ + k400, k401, k402, k403, k404, k408, k413, k415, k416, k417 \ +) { \ + { k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k013, k014, ____, k016, k017 }, \ + { k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, k114, ____, k116, k117 }, \ + { k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k212, k213, ____, k215, ____, k217 }, \ + { k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, k314, ____, k316, k317 }, \ + { k400, k401, k402, k403, k404, ____, ____, ____, k408, ____, ____, ____, ____, k413, ____, k415, k416, k417 }, \ +} From 731938ce9d500534bce2562be8f7c6ca2afc51d4 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Fri, 5 Nov 2021 13:49:39 -0700 Subject: [PATCH 447/595] [Keyboard] Fix compilation issues for superuser tkl (#15070) --- keyboards/superuser/tkl/tkl.h | 1 + 1 file changed, 1 insertion(+) diff --git a/keyboards/superuser/tkl/tkl.h b/keyboards/superuser/tkl/tkl.h index 4cbd8ecfbd..e84cd59737 100644 --- a/keyboards/superuser/tkl/tkl.h +++ b/keyboards/superuser/tkl/tkl.h @@ -17,6 +17,7 @@ #include "quantum.h" +#define ___ KC_NO /* * ┌───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┐ * │00 │ │02 │03 │04 │05 │ │06 │07 │08 │09 │ │0A │0B │0C │0D │ │0E │0F │0G │ From 4de89df5dca4c964c3fd4e9dd71a91810b3820ba Mon Sep 17 00:00:00 2001 From: Evelien Dekkers Date: Sat, 6 Nov 2021 05:22:01 +0100 Subject: [PATCH 448/595] [Keyboard] Add VIA to Gud70 (#15071) --- keyboards/evyd13/gud70/keymaps/via/keymap.c | 43 +++++++++++++++++++++ keyboards/evyd13/gud70/keymaps/via/rules.mk | 2 + 2 files changed, 45 insertions(+) create mode 100644 keyboards/evyd13/gud70/keymaps/via/keymap.c create mode 100644 keyboards/evyd13/gud70/keymaps/via/rules.mk diff --git a/keyboards/evyd13/gud70/keymaps/via/keymap.c b/keyboards/evyd13/gud70/keymaps/via/keymap.c new file mode 100644 index 0000000000..5fea39ebe0 --- /dev/null +++ b/keyboards/evyd13/gud70/keymaps/via/keymap.c @@ -0,0 +1,43 @@ +/* Copyright 2019 Evy Dekkers + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_all( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_INS, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, KC_END, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, TO(2), KC_PGUP, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT), + [1] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), + [2] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, KC_P7, KC_P8, KC_P9, _______, KC_PMNS, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, KC_P4, KC_P5, KC_P6, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, KC_P1, KC_P2, KC_P3, KC_PPLS, KC_PAST, _______, _______, TO(0), _______, + _______, _______, _______, _______, _______, _______, _______, _______, KC_P0, _______, KC_PDOT, KC_PSLS, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), + [3] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______), +}; \ No newline at end of file diff --git a/keyboards/evyd13/gud70/keymaps/via/rules.mk b/keyboards/evyd13/gud70/keymaps/via/rules.mk new file mode 100644 index 0000000000..36b7ba9cbc --- /dev/null +++ b/keyboards/evyd13/gud70/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes From e0a64c80726f100c1e8708995a1d96dca37dff31 Mon Sep 17 00:00:00 2001 From: Sergey Vlasov Date: Sat, 6 Nov 2021 16:07:53 +0300 Subject: [PATCH 449/595] Fixup broken build after #15040 (#15073) Rename keyboard files after moving them into revision directories. --- keyboards/kprepublic/bm60poker/rev1/{bm60poker.c => rev1.c} | 2 +- keyboards/kprepublic/bm60poker/rev1/{bm60poker.h => rev1.h} | 0 keyboards/kprepublic/bm60rgb/rev1/{bm60rgb.c => rev1.c} | 2 +- keyboards/kprepublic/bm60rgb/rev1/{bm60rgb.h => rev1.h} | 0 keyboards/kprepublic/bm60rgb_iso/rev1/{bm60rgb_iso.c => rev1.c} | 2 +- keyboards/kprepublic/bm60rgb_iso/rev1/{bm60rgb_iso.h => rev1.h} | 0 6 files changed, 3 insertions(+), 3 deletions(-) rename keyboards/kprepublic/bm60poker/rev1/{bm60poker.c => rev1.c} (99%) rename keyboards/kprepublic/bm60poker/rev1/{bm60poker.h => rev1.h} (100%) rename keyboards/kprepublic/bm60rgb/rev1/{bm60rgb.c => rev1.c} (99%) rename keyboards/kprepublic/bm60rgb/rev1/{bm60rgb.h => rev1.h} (100%) rename keyboards/kprepublic/bm60rgb_iso/rev1/{bm60rgb_iso.c => rev1.c} (99%) rename keyboards/kprepublic/bm60rgb_iso/rev1/{bm60rgb_iso.h => rev1.h} (100%) diff --git a/keyboards/kprepublic/bm60poker/rev1/bm60poker.c b/keyboards/kprepublic/bm60poker/rev1/rev1.c similarity index 99% rename from keyboards/kprepublic/bm60poker/rev1/bm60poker.c rename to keyboards/kprepublic/bm60poker/rev1/rev1.c index a7a3352097..4029a5466c 100644 --- a/keyboards/kprepublic/bm60poker/rev1/bm60poker.c +++ b/keyboards/kprepublic/bm60poker/rev1/rev1.c @@ -13,7 +13,7 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ -#include "bm60poker.h" +#include "rev1.h" #ifdef RGB_MATRIX_ENABLE led_config_t g_led_config = { { diff --git a/keyboards/kprepublic/bm60poker/rev1/bm60poker.h b/keyboards/kprepublic/bm60poker/rev1/rev1.h similarity index 100% rename from keyboards/kprepublic/bm60poker/rev1/bm60poker.h rename to keyboards/kprepublic/bm60poker/rev1/rev1.h diff --git a/keyboards/kprepublic/bm60rgb/rev1/bm60rgb.c b/keyboards/kprepublic/bm60rgb/rev1/rev1.c similarity index 99% rename from keyboards/kprepublic/bm60rgb/rev1/bm60rgb.c rename to keyboards/kprepublic/bm60rgb/rev1/rev1.c index 1b4840934f..352118c1b1 100644 --- a/keyboards/kprepublic/bm60rgb/rev1/bm60rgb.c +++ b/keyboards/kprepublic/bm60rgb/rev1/rev1.c @@ -13,7 +13,7 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ -#include "bm60rgb.h" +#include "rev1.h" led_config_t g_led_config = { { { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 }, diff --git a/keyboards/kprepublic/bm60rgb/rev1/bm60rgb.h b/keyboards/kprepublic/bm60rgb/rev1/rev1.h similarity index 100% rename from keyboards/kprepublic/bm60rgb/rev1/bm60rgb.h rename to keyboards/kprepublic/bm60rgb/rev1/rev1.h diff --git a/keyboards/kprepublic/bm60rgb_iso/rev1/bm60rgb_iso.c b/keyboards/kprepublic/bm60rgb_iso/rev1/rev1.c similarity index 99% rename from keyboards/kprepublic/bm60rgb_iso/rev1/bm60rgb_iso.c rename to keyboards/kprepublic/bm60rgb_iso/rev1/rev1.c index 4e292bc549..f708e74c27 100644 --- a/keyboards/kprepublic/bm60rgb_iso/rev1/bm60rgb_iso.c +++ b/keyboards/kprepublic/bm60rgb_iso/rev1/rev1.c @@ -13,7 +13,7 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ -#include "bm60rgb_iso.h" +#include "rev1.h" #if defined(RGB_MATRIX_ENABLE) led_config_t g_led_config = { { diff --git a/keyboards/kprepublic/bm60rgb_iso/rev1/bm60rgb_iso.h b/keyboards/kprepublic/bm60rgb_iso/rev1/rev1.h similarity index 100% rename from keyboards/kprepublic/bm60rgb_iso/rev1/bm60rgb_iso.h rename to keyboards/kprepublic/bm60rgb_iso/rev1/rev1.h From 74b5a4357c46520c11ad2a705fc31818c64b7c25 Mon Sep 17 00:00:00 2001 From: takashicompany Date: Sun, 7 Nov 2021 00:41:22 +0900 Subject: [PATCH 450/595] [Keyboard] Add new keyboard "Heavy Left" (#15052) Co-authored-by: Drashna Jaelre Co-authored-by: Takeshi ISHII <2170248+mtei@users.noreply.github.com> Co-authored-by: Ryan --- keyboards/takashicompany/heavy_left/config.h | 145 +++++ .../takashicompany/heavy_left/heavy_left.c | 17 + .../takashicompany/heavy_left/heavy_left.h | 46 ++ keyboards/takashicompany/heavy_left/info.json | 496 ++++++++++++++++++ .../heavy_left/keymaps/default/keymap.c | 53 ++ .../heavy_left/keymaps/via/keymap.c | 69 +++ .../heavy_left/keymaps/via/rules.mk | 1 + keyboards/takashicompany/heavy_left/readme.md | 33 ++ keyboards/takashicompany/heavy_left/rules.mk | 23 + 9 files changed, 883 insertions(+) create mode 100644 keyboards/takashicompany/heavy_left/config.h create mode 100644 keyboards/takashicompany/heavy_left/heavy_left.c create mode 100644 keyboards/takashicompany/heavy_left/heavy_left.h create mode 100644 keyboards/takashicompany/heavy_left/info.json create mode 100644 keyboards/takashicompany/heavy_left/keymaps/default/keymap.c create mode 100644 keyboards/takashicompany/heavy_left/keymaps/via/keymap.c create mode 100644 keyboards/takashicompany/heavy_left/keymaps/via/rules.mk create mode 100644 keyboards/takashicompany/heavy_left/readme.md create mode 100644 keyboards/takashicompany/heavy_left/rules.mk diff --git a/keyboards/takashicompany/heavy_left/config.h b/keyboards/takashicompany/heavy_left/config.h new file mode 100644 index 0000000000..e7f37f251c --- /dev/null +++ b/keyboards/takashicompany/heavy_left/config.h @@ -0,0 +1,145 @@ +/* +Copyright 2021 takashicompany + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x7463 // tc = takashicompany +#define PRODUCT_ID 0x0015 +#define DEVICE_VER 0x0001 +#define MANUFACTURER takashicompany +#define PRODUCT Heavy Left + +/* key matrix size */ +#define MATRIX_ROWS 5 * 2 +#define MATRIX_COLS 10 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 } +#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2, B6, D1, D0 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +#define SOFT_SERIAL_PIN D2 // or D1, D2, D3, E6 + +//#define LED_NUM_LOCK_PIN B0 +//#define LED_CAPS_LOCK_PIN B1 +//#define LED_SCROLL_LOCK_PIN B2 +//#define LED_COMPOSE_PIN B3 +//#define LED_KANA_PIN B4 + +//#define BACKLIGHT_PIN B7 +//#define BACKLIGHT_LEVELS 3 +//#define BACKLIGHT_BREATHING + +#define RGB_DI_PIN D3 +#ifdef RGB_DI_PIN +# define RGBLED_NUM 6 * 2 +# define RGBLED_SPLIT {6, 6} +# define RGBLIGHT_HUE_STEP 8 +# define RGBLIGHT_SAT_STEP 8 +# define RGBLIGHT_VAL_STEP 8 +# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/takashicompany/heavy_left/heavy_left.c b/keyboards/takashicompany/heavy_left/heavy_left.c new file mode 100644 index 0000000000..2af6d3fe61 --- /dev/null +++ b/keyboards/takashicompany/heavy_left/heavy_left.c @@ -0,0 +1,17 @@ +/* Copyright 2021 takashicompany + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "heavy_left.h" diff --git a/keyboards/takashicompany/heavy_left/heavy_left.h b/keyboards/takashicompany/heavy_left/heavy_left.h new file mode 100644 index 0000000000..a54f88b303 --- /dev/null +++ b/keyboards/takashicompany/heavy_left/heavy_left.h @@ -0,0 +1,46 @@ +/* Copyright 2021 takashicompany + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + l06, l07, l08, l09, l00, l01, l02, l03, l04, l05, r00, r01, r02, r03, r04, r05, r06, r07, r08, r09, \ + l16, l17, l18, l19, l10, l11, l12, l13, l14, l15, r10, r11, r12, r13, r14, r15, r16, r17, r18, \ + l26, l27, l28, l29, l20, l21, l22, l23, l24, l25, r20, r21, r22, r23, r24, r25, r26, r27, \ + l36, l37, l38, l39, l30, l31, l32, l33, l34, l35, r30, r31, r32, r33, r34, r35, r36, r37, r38, \ + l46, l47, l48, l49, l40, l41, l42, l43, l44, l45, r40, r41, r42, r43, r44, r45, r46, r47, r48 \ +) { \ + { l00, l01, l02, l03, l04, l05, l06, l07, l08, l09 }, \ + { l10, l11, l12, l13, l14, l15, l16, l17, l18, l19 }, \ + { l20, l21, l22, l23, l24, l25, l26, l27, l28, l29 }, \ + { l30, l31, l32, l33, l34, l35, l36, l37, l38, l39 }, \ + { l40, l41, l42, l43, l44, l45, l46, l47, l48, l49 }, \ + { r00, r01, r02, r03, r04, r05, r06, r07, r09, KC_NO }, \ + { r10, r11, r12, r13, r14, r15, r16, r08, r18, KC_NO }, \ + { r20, r21, r22, r23, r24, r25, r26, r17, r27, KC_NO }, \ + { r30, r31, r32, r33, r34, r35, r36, r37, r38, KC_NO }, \ + { r40, r41, r42, r43, r44, r45, r46, r47, r48, KC_NO } \ +} diff --git a/keyboards/takashicompany/heavy_left/info.json b/keyboards/takashicompany/heavy_left/info.json new file mode 100644 index 0000000000..878618e63d --- /dev/null +++ b/keyboards/takashicompany/heavy_left/info.json @@ -0,0 +1,496 @@ +{ + "keyboard_name": "heavy_left", + "url": "", + "maintainer": "takashicompany", + "layouts": { + "LAYOUT": { + "layout": [ + { + "label": "24", + "x": 0, + "y": 0 + }, + { + "label": "25", + "x": 1, + "y": 0 + }, + { + "label": "26", + "x": 2, + "y": 0 + }, + { + "label": "27", + "x": 3, + "y": 0 + }, + { + "label": "1", + "x": 4.25, + "y": 0 + }, + { + "label": "2", + "x": 5.25, + "y": 0 + }, + { + "label": "3", + "x": 6.25, + "y": 0 + }, + { + "label": "4", + "x": 7.25, + "y": 0 + }, + { + "label": "5", + "x": 8.25, + "y": 0 + }, + { + "label": "6", + "x": 9.25, + "y": 0 + }, + { + "label": "44", + "x": 10.75, + "y": 0 + }, + { + "label": "45", + "x": 11.75, + "y": 0 + }, + { + "label": "46", + "x": 12.75, + "y": 0 + }, + { + "label": "47", + "x": 13.75, + "y": 0 + }, + { + "label": "48", + "x": 14.75, + "y": 0 + }, + { + "label": "49", + "x": 15.75, + "y": 0 + }, + { + "label": "50", + "x": 16.75, + "y": 0 + }, + { + "label": "51", + "x": 17.75, + "y": 0 + }, + { + "label": "52", + "x": 18.75, + "y": 0 + }, + { + "label": "82", + "x": 20, + "y": 0 + }, + { + "label": "28", + "x": 0, + "y": 1 + }, + { + "label": "29", + "x": 1, + "y": 1 + }, + { + "label": "30", + "x": 2, + "y": 1 + }, + { + "label": "31", + "x": 3, + "y": 1 + }, + { + "label": "201", + "x": 4.25, + "y": 1, + "w": 1.5 + }, + { + "label": "7", + "x": 5.75, + "y": 1 + }, + { + "label": "8", + "x": 6.75, + "y": 1 + }, + { + "label": "9", + "x": 7.75, + "y": 1 + }, + { + "label": "10", + "x": 8.75, + "y": 1 + }, + { + "label": "11", + "x": 9.75, + "y": 1 + }, + { + "label": "53", + "x": 11.25, + "y": 1 + }, + { + "label": "54", + "x": 12.25, + "y": 1 + }, + { + "label": "55", + "x": 13.25, + "y": 1 + }, + { + "label": "56", + "x": 14.25, + "y": 1 + }, + { + "label": "57", + "x": 15.25, + "y": 1 + }, + { + "label": "58", + "x": 16.25, + "y": 1 + }, + { + "label": "59", + "x": 17.25, + "y": 1 + }, + { + "label": "901", + "x": 18.5, + "y": 1, + "w": 1.25, + "h": 2 + }, + { + "label": "83", + "x": 20, + "y": 1 + }, + { + "label": "32", + "x": 0, + "y": 2 + }, + { + "label": "33", + "x": 1, + "y": 2 + }, + { + "label": "34", + "x": 2, + "y": 2 + }, + { + "label": "35", + "x": 3, + "y": 2 + }, + { + "label": "301", + "x": 4.25, + "y": 2, + "w": 1.75 + }, + { + "label": "12", + "x": 6, + "y": 2 + }, + { + "label": "13", + "x": 7, + "y": 2 + }, + { + "label": "14", + "x": 8, + "y": 2 + }, + { + "label": "15", + "x": 9, + "y": 2 + }, + { + "label": "16", + "x": 10, + "y": 2 + }, + { + "label": "60", + "x": 11.5, + "y": 2 + }, + { + "label": "61", + "x": 12.5, + "y": 2 + }, + { + "label": "62", + "x": 13.5, + "y": 2 + }, + { + "label": "63", + "x": 14.5, + "y": 2 + }, + { + "label": "64", + "x": 15.5, + "y": 2 + }, + { + "label": "65", + "x": 16.5, + "y": 2 + }, + { + "label": "66", + "x": 17.5, + "y": 2 + }, + { + "label": "84", + "x": 20, + "y": 2 + }, + { + "label": "36", + "x": 0, + "y": 3 + }, + { + "label": "37", + "x": 1, + "y": 3 + }, + { + "label": "38", + "x": 2, + "y": 3 + }, + { + "label": "39", + "x": 3, + "y": 3 + }, + { + "label": "601", + "x": 4.25, + "y": 3, + "w": 2.25 + }, + { + "label": "17", + "x": 6.5, + "y": 3 + }, + { + "label": "18", + "x": 7.5, + "y": 3 + }, + { + "label": "19", + "x": 8.5, + "y": 3 + }, + { + "label": "20", + "x": 9.5, + "y": 3 + }, + { + "label": "21", + "x": 10.5, + "y": 3 + }, + { + "label": "67", + "x": 11.75, + "y": 3 + }, + { + "label": "68", + "x": 12.75, + "y": 3 + }, + { + "label": "69", + "x": 13.75, + "y": 3 + }, + { + "label": "70", + "x": 14.75, + "y": 3 + }, + { + "label": "71", + "x": 15.75, + "y": 3 + }, + { + "label": "72", + "x": 16.75, + "y": 3 + }, + { + "label": "73", + "x": 17.75, + "y": 3 + }, + { + "label": "74", + "x": 18.75, + "y": 3 + }, + { + "label": "85", + "x": 20, + "y": 3 + }, + { + "label": "40", + "x": 0, + "y": 4 + }, + { + "label": "41", + "x": 1, + "y": 4 + }, + { + "label": "42", + "x": 2, + "y": 4 + }, + { + "label": "43", + "x": 3, + "y": 4 + }, + { + "label": "101", + "x": 4.25, + "y": 4, + "w": 1.25 + }, + { + "label": "22", + "x": 5.5, + "y": 4 + }, + { + "label": "102", + "x": 6.5, + "y": 4, + "w": 1.25 + }, + { + "label": "23", + "x": 7.75, + "y": 4 + }, + { + "label": "103", + "x": 8.75, + "y": 4, + "w": 1.25 + }, + { + "label": "104", + "x": 10, + "y": 4, + "w": 1.25 + }, + { + "label": "75", + "x": 11.5, + "y": 4 + }, + { + "label": "105", + "x": 12.5, + "y": 4, + "w": 1.25 + }, + { + "label": "76", + "x": 13.75, + "y": 4 + }, + { + "label": "77", + "x": 14.75, + "y": 4 + }, + { + "label": "78", + "x": 15.75, + "y": 4 + }, + { + "label": "79", + "x": 16.75, + "y": 4 + }, + { + "label": "80", + "x": 17.75, + "y": 4 + }, + { + "label": "81", + "x": 18.75, + "y": 4 + }, + { + "label": "86", + "x": 20, + "y": 4 + } + ] + } + } +} \ No newline at end of file diff --git a/keyboards/takashicompany/heavy_left/keymaps/default/keymap.c b/keyboards/takashicompany/heavy_left/keymaps/default/keymap.c new file mode 100644 index 0000000000..31ac47c047 --- /dev/null +++ b/keyboards/takashicompany/heavy_left/keymaps/default/keymap.c @@ -0,0 +1,53 @@ +/* Copyright 2021 takashicompany + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H +#include "keymap_jp.h" + +// Defines the keycodes used by our macros in process_record_user +enum custom_keycodes { + KC_00 = SAFE_RANGE +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + LAYOUT( + KC_ESC, KC_PSLS, KC_PAST, KC_PMNS, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_JYEN, KC_BSPC, KC_DEL, + KC_P7, KC_P8, KC_P9, KC_PPLS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_ENT, KC_HOME, + KC_P4, KC_P5, KC_P6, KC_PCMM, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_END, + KC_P1, KC_P2, KC_P3, KC_PEQL, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, JP_BSLS, KC_UP, KC_RSFT, KC_PGUP, + KC_P0, KC_00, KC_PDOT, KC_PENT, KC_TILD, KC_LCTL, KC_LGUI, KC_LALT, KC_LANG2, KC_SPC, KC_SPC, KC_LANG1, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, MO(1) + ), + + LAYOUT( + KC_NLCK, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_M_K, RGB_M_X, RGB_M_G, RGB_M_T, RGB_M_T, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case KC_00: + if (record->event.pressed) { + SEND_STRING("00"); + } + return false; + } + return true; +} \ No newline at end of file diff --git a/keyboards/takashicompany/heavy_left/keymaps/via/keymap.c b/keyboards/takashicompany/heavy_left/keymaps/via/keymap.c new file mode 100644 index 0000000000..796d27914d --- /dev/null +++ b/keyboards/takashicompany/heavy_left/keymaps/via/keymap.c @@ -0,0 +1,69 @@ +/* Copyright 2021 takashicompany + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H +#include "keymap_jp.h" + +// Defines the keycodes used by our macros in process_record_user +enum custom_keycodes { + KC_00 = USER00, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + LAYOUT( + KC_ESC, KC_PSLS, KC_PAST, KC_PMNS, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_JYEN, KC_BSPC, KC_DEL, + KC_P7, KC_P8, KC_P9, KC_PPLS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_ENT, KC_HOME, + KC_P4, KC_P5, KC_P6, KC_PCMM, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_END, + KC_P1, KC_P2, KC_P3, KC_PEQL, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, JP_BSLS, KC_UP, KC_RSFT, KC_PGUP, + KC_P0, KC_00, KC_PDOT, KC_PENT, KC_TILD, KC_LCTL, KC_LGUI, KC_LALT, KC_LANG2, KC_SPC, KC_SPC, KC_LANG1, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, MO(1) + ), + + LAYOUT( + KC_NLCK, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_SAI, RGB_VAI, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_M_K, RGB_M_X, RGB_M_G, RGB_M_T, RGB_M_T, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + LAYOUT( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) + +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case KC_00: + if (record->event.pressed) { + SEND_STRING("00"); + } + return false; + } + return true; +} \ No newline at end of file diff --git a/keyboards/takashicompany/heavy_left/keymaps/via/rules.mk b/keyboards/takashicompany/heavy_left/keymaps/via/rules.mk new file mode 100644 index 0000000000..036bd6d1c3 --- /dev/null +++ b/keyboards/takashicompany/heavy_left/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes \ No newline at end of file diff --git a/keyboards/takashicompany/heavy_left/readme.md b/keyboards/takashicompany/heavy_left/readme.md new file mode 100644 index 0000000000..4cd0e1b0cc --- /dev/null +++ b/keyboards/takashicompany/heavy_left/readme.md @@ -0,0 +1,33 @@ +# heavy_left + +![heavy_left](https://github.com/takashicompany/heavy_left/blob/master/images/qmk.jpg) + +This is a 95-key split type Japanese keyboard. +It has a numeric keypad on the left hand side, which can be used not only for entering numbers but also as a dedicated macro pad. +It also supports key switch replacement with MX sockets and LED underglow. + +95キーの分割型の日本語配列のキーボードです。 +左手側にテンキーが備え付けられており、数字の入力だけでなく専用のマクロパッドとしても使用が可能です。 +MXソケットによるキースイッチの付替えや、LEDによるアンダーグロウにも対応しています。 + +* Keyboard Maintainer: [takashicompany](https://github.com/yourusername) +* Hardware Supported: PCB, Pro Micro +* Hardware Availability: https://github.com/takashicompany/heavy_left + +Make example for this keyboard (after setting up your build environment): + + make takashicompany/heavy_left:default + +Flashing example for this keyboard: + + make takashicompany/heavy_left:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available diff --git a/keyboards/takashicompany/heavy_left/rules.mk b/keyboards/takashicompany/heavy_left/rules.mk new file mode 100644 index 0000000000..d4e19e6546 --- /dev/null +++ b/keyboards/takashicompany/heavy_left/rules.mk @@ -0,0 +1,23 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = caterina + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output + +SPLIT_KEYBOARD=yes \ No newline at end of file From 0b89fa3324879e04f6f0a65a4996a456cf5e0456 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Sat, 6 Nov 2021 18:52:31 +0000 Subject: [PATCH 451/595] idb 60 Layout Macro Refactor (#15079) * alias LAYOUT to LAYOUT_all * move layout alias to info.json * use XXX for KC_NO in idb_60.h * remove newline characters from info.json labels * put LAYOUT_all data first in info.json Matches the order of idb_60.h. * friendly-format info.json * add matrix diagram to idb_60.h * rename LAYOUT_default to LAYOUT_60_ansi_wkl_split_rshift * add LAYOUT_60_tsangan_hhkb * add LAYOUT_60_ansi_tsangan * add LAYOUT_60_iso_tsangan * add LAYOUT_60_iso_wkl_split_rshift * add LAYOUT_60_iso_tsangan_hhkb * edit Backspace label for LAYOUT_60_ansi_wkl_split_rshift * use GitHub username in info.json maintainer field --- keyboards/idb/idb_60/idb_60.h | 165 ++++++- keyboards/idb/idb_60/info.json | 452 ++++++++++++++++-- keyboards/idb/idb_60/keymaps/default/keymap.c | 8 +- keyboards/idb/idb_60/keymaps/via/keymap.c | 8 +- 4 files changed, 555 insertions(+), 78 deletions(-) diff --git a/keyboards/idb/idb_60/idb_60.h b/keyboards/idb/idb_60/idb_60.h index 069f4bcf56..5ee07bff36 100644 --- a/keyboards/idb/idb_60/idb_60.h +++ b/keyboards/idb/idb_60/idb_60.h @@ -10,42 +10,161 @@ void _idb_60_fn_led_off(void); #define _idb_60_esc_led_on() _idb_60_fn_led_on() #define _idb_60_esc_led_off() _idb_60_fn_led_off() -#define LAYOUT( \ +#define XXX KC_NO + +/* + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ ┌───────┐ + * │00 │10 │01 │11 │02 │12 │03 │13 │04 │14 │05 │15 │06 │16 │07 │ │16 │ 2u Backspace + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┤ └─┬─────┤ + * │20 │30 │21 │31 │22 │32 │23 │33 │24 │34 │25 │35 │26 │36 │ │ │ + * 2.25u ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ ┌──┴┐56 │ ISO Enter + * LShift │40 │50 │41 │51 │42 │52 │43 │53 │44 │54 │45 │55 │56 │ │36 │ │ + * ┌────────┐ ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┤ ┌─┴───┴────┤ + * │60 │ │60 │70 │61 │71 │62 │72 │63 │73 │64 │74 │65 │75 │66 │76 │ │66 │ 2.75u RShift + * └────────┘ ├────┴┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴───┴──┬┴───┴┬───┬─┴───┤ └──────────┘ + * │80 │90 │81 │93 │95 │86 │96 │ + * └─────┴───┴─────┴───────────────────────────┴─────┴───┴─────┘ + * ┌─────┬───┬─────┬───────────────────────────┬─────┬───┬─────┐ + * │80 │ │81 │93 │95 │ │96 │ WKL + * └─────┘ └─────┴───────────────────────────┴─────┘ └─────┘ + * ┌───┬─────┬───────────────────────────┬─────┬───┐ + * │90 │81 │93 │95 │86 │ MX HHKB + * └───┴─────┴───────────────────────────┴─────┴───┘ + * ┌───┬─────┬───────────────────────┬─────┬───┐ + * │90 │81 │93 │95 │86 │ True HHKB + * └───┴─────┴───────────────────────┴─────┴───┘ + */ + + +#define LAYOUT_all( \ K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K16, K07, \ K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K26, K36, \ K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K56, \ K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K66, K76, \ K80, K90, K81, K93, K95, K86, K96 \ ) { \ - { K00, K01, K02, K03, K04, K05, K06, K07 }, \ - { K10, K11, K12, K13, K14, K15, K16 }, \ - { K20, K21, K22, K23, K24, K25, K26 }, \ - { K30, K31, K32, K33, K34, K35, K36 }, \ - { K40, K41, K42, K43, K44, K45, KC_NO }, \ - { K50, K51, K52, K53, K54, K55, K56 }, \ - { K60, K61, K62, K63, K64, K65, K66 }, \ - { K70, K71, K72, K73, K74, K75, K76 }, \ - { K80, K81, KC_NO, KC_NO, KC_NO, KC_NO, K86 }, \ - { K90, KC_NO, KC_NO, K93, KC_NO, K95, K96 } \ + { K00, K01, K02, K03, K04, K05, K06, K07 }, \ + { K10, K11, K12, K13, K14, K15, K16, XXX }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, XXX, XXX }, \ + { K50, K51, K52, K53, K54, K55, K56, XXX }, \ + { K60, K61, K62, K63, K64, K65, K66, XXX }, \ + { K70, K71, K72, K73, K74, K75, K76, XXX }, \ + { K80, K81, XXX, XXX, XXX, XXX, K86, XXX }, \ + { K90, XXX, XXX, K93, XXX, K95, K96, XXX } \ } -#define LAYOUT_all LAYOUT +#define LAYOUT_60_ansi_tsangan( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K16, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K26, K36, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K56, \ + K60, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K66, \ + K80, K90, K81, K93, K95, K86, K96 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, K16, XXX }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, XXX, XXX }, \ + { K50, K51, K52, K53, K54, K55, K56, XXX }, \ + { K60, K61, K62, K63, K64, K65, K66, XXX }, \ + { XXX, K71, K72, K73, K74, K75, XXX, XXX }, \ + { K80, K81, XXX, XXX, XXX, XXX, K86, XXX }, \ + { K90, XXX, XXX, K93, XXX, K95, K96, XXX } \ +} + +#define LAYOUT_60_tsangan_hhkb( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K16, K07, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K26, K36, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K56, \ + K60, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K66, K76, \ + K80, K90, K81, K93, K95, K86, K96 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07 }, \ + { K10, K11, K12, K13, K14, K15, K16, XXX }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, XXX, XXX }, \ + { K50, K51, K52, K53, K54, K55, K56, XXX }, \ + { K60, K61, K62, K63, K64, K65, K66, XXX }, \ + { XXX, K71, K72, K73, K74, K75, K76, XXX }, \ + { K80, K81, XXX, XXX, XXX, XXX, K86, XXX }, \ + { K90, XXX, XXX, K93, XXX, K95, K96, XXX } \ +} -#define LAYOUT_default( \ +#define LAYOUT_60_ansi_wkl_split_rshift( \ K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K16, \ K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K26, K36, \ K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K56, \ K60, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K66, K76, \ K80, K81, K93, K95, K96 \ ) { \ - { K00, K01, K02, K03, K04, K05, K06, KC_NO }, \ - { K10, K11, K12, K13, K14, K15, K16 }, \ - { K20, K21, K22, K23, K24, K25, K26 }, \ - { K30, K31, K32, K33, K34, K35, K36 }, \ - { K40, K41, K42, K43, K44, K45, KC_NO }, \ - { K50, K51, K52, K53, K54, K55, K56 }, \ - { K60, K61, K62, K63, K64, K65, K66 }, \ - { KC_NO, K71, K72, K73, K74, K75, K76 }, \ - { K80, K81, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ - { KC_NO, KC_NO, KC_NO, K93, KC_NO, K95, K96 } \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, K16, XXX }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, XXX, XXX }, \ + { K50, K51, K52, K53, K54, K55, K56, XXX }, \ + { K60, K61, K62, K63, K64, K65, K66, XXX }, \ + { XXX, K71, K72, K73, K74, K75, K76, XXX }, \ + { K80, K81, XXX, XXX, XXX, XXX, XXX, XXX }, \ + { XXX, XXX, XXX, K93, XXX, K95, K96, XXX } \ +} + +#define LAYOUT_60_iso_tsangan( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K16, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K26, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K36, K56, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K66, \ + K80, K90, K81, K93, K95, K86, K96 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, K16, XXX }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, XXX, XXX }, \ + { K50, K51, K52, K53, K54, K55, K56, XXX }, \ + { K60, K61, K62, K63, K64, K65, K66, XXX }, \ + { K70, K71, K72, K73, K74, K75, XXX, XXX }, \ + { K80, K81, XXX, XXX, XXX, XXX, K86, XXX }, \ + { K90, XXX, XXX, K93, XXX, K95, K96, XXX } \ +} + +#define LAYOUT_60_iso_tsangan_hhkb( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K16, K07, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K26, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K36, K56, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K66, K76, \ + K80, K90, K81, K93, K95, K86, K96 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07 }, \ + { K10, K11, K12, K13, K14, K15, K16, XXX }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, XXX, XXX }, \ + { K50, K51, K52, K53, K54, K55, K56, XXX }, \ + { K60, K61, K62, K63, K64, K65, K66, XXX }, \ + { K70, K71, K72, K73, K74, K75, K76, XXX }, \ + { K80, K81, XXX, XXX, XXX, XXX, K86, XXX }, \ + { K90, XXX, XXX, K93, XXX, K95, K96, XXX } \ +} + +#define LAYOUT_60_iso_wkl_split_rshift( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K16, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K26, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K36, K56, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K66, K76, \ + K80, K81, K93, K95, K96 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, K16, XXX }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, XXX, XXX }, \ + { K50, K51, K52, K53, K54, K55, K56, XXX }, \ + { K60, K61, K62, K63, K64, K65, K66, XXX }, \ + { K70, K71, K72, K73, K74, K75, K76, XXX }, \ + { K80, K81, XXX, XXX, XXX, XXX, XXX, XXX }, \ + { XXX, XXX, XXX, K93, XXX, K95, K96, XXX } \ } diff --git a/keyboards/idb/idb_60/info.json b/keyboards/idb/idb_60/info.json index bf40fe160d..d78c848c6d 100644 --- a/keyboards/idb/idb_60/info.json +++ b/keyboards/idb/idb_60/info.json @@ -1,24 +1,30 @@ { "keyboard_name": "idb 60", "url": "https://idb-keyboards.xyz/60", - "maintainer": "pngu", + "maintainer": "itspngu", + "layout_aliases": { + "LAYOUT": "LAYOUT_all", + "LAYOUT_default": "LAYOUT_60_ansi_wkl_split_rshift" + }, "layouts": { - "LAYOUT_default": { + "LAYOUT_all": { "layout": [ {"label":"Esc", "x":0, "y":0}, - {"label":"!\n1", "x":1, "y":0}, - {"label":"@\n2", "x":2, "y":0}, - {"label":"#\n3", "x":3, "y":0}, - {"label":"$\n4", "x":4, "y":0}, - {"label":"%\n5", "x":5, "y":0}, - {"label":"^\n6", "x":6, "y":0}, - {"label":"&\n7", "x":7, "y":0}, - {"label":"*\n8", "x":8, "y":0}, - {"label":"(\n9", "x":9, "y":0}, - {"label":")\n0", "x":10, "y":0}, - {"label":"_\n-", "x":11, "y":0}, - {"label":"+\n=", "x":12, "y":0}, - {"label":"BS", "x":13, "y":0, "w":2.0}, + {"label":"1!", "x":1, "y":0}, + {"label":"2@", "x":2, "y":0}, + {"label":"3#", "x":3, "y":0}, + {"label":"4$", "x":4, "y":0}, + {"label":"5%", "x":5, "y":0}, + {"label":"6^", "x":6, "y":0}, + {"label":"7&", "x":7, "y":0}, + {"label":"8*", "x":8, "y":0}, + {"label":"9(", "x":9, "y":0}, + {"label":"0)", "x":10, "y":0}, + {"label":"-_", "x":11, "y":0}, + {"label":"=+", "x":12, "y":0}, + {"label":"BS", "x":13, "y":0}, + {"label":"`~", "x":14, "y":0}, + {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, @@ -30,9 +36,10 @@ {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, - {"label":"{\n[", "x":11.5, "y":1}, - {"label":"}\n]", "x":12.5, "y":1}, - {"label":"|\n\\", "x":13.5, "y":1, "w":1.5}, + {"label":"[{", "x":11.5, "y":1}, + {"label":"]}", "x":12.5, "y":1}, + {"label":"\\|", "x":13.5, "y":1, "w":1.5}, + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, @@ -43,10 +50,12 @@ {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, - {"label":":\n;", "x":10.75, "y":2}, - {"label":"\"\n'", "x":11.75, "y":2}, + {"label":";:", "x":10.75, "y":2}, + {"label":"'\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, - {"label":"Shift", "x":0, "y":3, "w":2.25}, + + {"label":"Shift", "x":0, "y":3, "w":1.25}, + {"label":"<>", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, @@ -54,35 +63,107 @@ {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, - {"label":"<\n,", "x":9.25, "y":3}, - {"label":">\n.", "x":10.25, "y":3}, - {"label":"?\n/", "x":11.25, "y":3}, + {"label":",<", "x":9.25, "y":3}, + {"label":".>", "x":10.25, "y":3}, + {"label":"/?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, + {"label":"Ctrl", "x":0, "y":4, "w":1.5}, + {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, {"label":"Space", "x":4, "y":4, "w":7}, {"label":"Alt", "x":11, "y":4, "w":1.5}, + {"label":"Win", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5} ] }, - "LAYOUT": { + "LAYOUT_60_ansi_tsangan": { "layout": [ {"label":"Esc", "x":0, "y":0}, - {"label":"!\n1", "x":1, "y":0}, - {"label":"@\n2", "x":2, "y":0}, - {"label":"#\n3", "x":3, "y":0}, - {"label":"$\n4", "x":4, "y":0}, - {"label":"%\n5", "x":5, "y":0}, - {"label":"^\n6", "x":6, "y":0}, - {"label":"&\n7", "x":7, "y":0}, - {"label":"*\n8", "x":8, "y":0}, - {"label":"(\n9", "x":9, "y":0}, - {"label":")\n0", "x":10, "y":0}, - {"label":"_\n-", "x":11, "y":0}, - {"label":"+\n=", "x":12, "y":0}, + {"label":"1!", "x":1, "y":0}, + {"label":"2@", "x":2, "y":0}, + {"label":"3#", "x":3, "y":0}, + {"label":"4$", "x":4, "y":0}, + {"label":"5%", "x":5, "y":0}, + {"label":"6^", "x":6, "y":0}, + {"label":"7&", "x":7, "y":0}, + {"label":"8*", "x":8, "y":0}, + {"label":"9(", "x":9, "y":0}, + {"label":"0)", "x":10, "y":0}, + {"label":"-_", "x":11, "y":0}, + {"label":"=+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0, "w":2}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[{", "x":11.5, "y":1}, + {"label":"]}", "x":12.5, "y":1}, + {"label":"\\|", "x":13.5, "y":1, "w":1.5}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";:", "x":10.75, "y":2}, + {"label":"'\"", "x":11.75, "y":2}, + {"label":"Enter", "x":12.75, "y":2, "w":2.25}, + + {"label":"Shift", "x":0, "y":3, "w":2.25}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",<", "x":9.25, "y":3}, + {"label":".>", "x":10.25, "y":3}, + {"label":"/?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":2.75}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.5}, + {"label":"Win", "x":1.5, "y":4}, + {"label":"Alt", "x":2.5, "y":4, "w":1.5}, + {"label":"Space", "x":4, "y":4, "w":7}, + {"label":"Alt", "x":11, "y":4, "w":1.5}, + {"label":"Win", "x":12.5, "y":4}, + {"label":"Ctrl", "x":13.5, "y":4, "w":1.5} + ] + }, + "LAYOUT_60_tsangan_hhkb": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"1!", "x":1, "y":0}, + {"label":"2@", "x":2, "y":0}, + {"label":"3#", "x":3, "y":0}, + {"label":"4$", "x":4, "y":0}, + {"label":"5%", "x":5, "y":0}, + {"label":"6^", "x":6, "y":0}, + {"label":"7&", "x":7, "y":0}, + {"label":"8*", "x":8, "y":0}, + {"label":"9(", "x":9, "y":0}, + {"label":"0)", "x":10, "y":0}, + {"label":"-_", "x":11, "y":0}, + {"label":"=+", "x":12, "y":0}, {"label":"BS", "x":13, "y":0}, - {"label":"~\n`", "x":14, "y":0}, + {"label":"`~", "x":14, "y":0}, + {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, @@ -94,9 +175,10 @@ {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, - {"label":"{\n[", "x":11.5, "y":1}, - {"label":"}\n]", "x":12.5, "y":1}, - {"label":"|\n\\", "x":13.5, "y":1, "w":1.5}, + {"label":"[{", "x":11.5, "y":1}, + {"label":"]}", "x":12.5, "y":1}, + {"label":"\\|", "x":13.5, "y":1, "w":1.5}, + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, @@ -107,11 +189,148 @@ {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, - {"label":":\n;", "x":10.75, "y":2}, - {"label":"\"\n'", "x":11.75, "y":2}, + {"label":";:", "x":10.75, "y":2}, + {"label":"'\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, + + {"label":"Shift", "x":0, "y":3, "w":2.25}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",<", "x":9.25, "y":3}, + {"label":".>", "x":10.25, "y":3}, + {"label":"/?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"Fn", "x":14, "y":3}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.5}, + {"label":"Win", "x":1.5, "y":4}, + {"label":"Alt", "x":2.5, "y":4, "w":1.5}, + {"label":"Space", "x":4, "y":4, "w":7}, + {"label":"Alt", "x":11, "y":4, "w":1.5}, + {"label":"Win", "x":12.5, "y":4}, + {"label":"Ctrl", "x":13.5, "y":4, "w":1.5} + ] + }, + "LAYOUT_60_ansi_wkl_split_rshift": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"1!", "x":1, "y":0}, + {"label":"2@", "x":2, "y":0}, + {"label":"3#", "x":3, "y":0}, + {"label":"4$", "x":4, "y":0}, + {"label":"5%", "x":5, "y":0}, + {"label":"6^", "x":6, "y":0}, + {"label":"7&", "x":7, "y":0}, + {"label":"8*", "x":8, "y":0}, + {"label":"9(", "x":9, "y":0}, + {"label":"0)", "x":10, "y":0}, + {"label":"-_", "x":11, "y":0}, + {"label":"=+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0, "w":2.0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[{", "x":11.5, "y":1}, + {"label":"]}", "x":12.5, "y":1}, + {"label":"\\|", "x":13.5, "y":1, "w":1.5}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";:", "x":10.75, "y":2}, + {"label":"'\"", "x":11.75, "y":2}, + {"label":"Enter", "x":12.75, "y":2, "w":2.25}, + + {"label":"Shift", "x":0, "y":3, "w":2.25}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",<", "x":9.25, "y":3}, + {"label":".>", "x":10.25, "y":3}, + {"label":"/?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"Fn", "x":14, "y":3}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.5}, + {"label":"Alt", "x":2.5, "y":4, "w":1.5}, + {"label":"Space", "x":4, "y":4, "w":7}, + {"label":"Alt", "x":11, "y":4, "w":1.5}, + {"label":"Ctrl", "x":13.5, "y":4, "w":1.5} + ] + }, + "LAYOUT_60_iso_tsangan": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"1!", "x":1, "y":0}, + {"label":"2\"", "x":2, "y":0}, + {"label":"3\u00a3", "x":3, "y":0}, + {"label":"4$", "x":4, "y":0}, + {"label":"5%", "x":5, "y":0}, + {"label":"6^", "x":6, "y":0}, + {"label":"7&", "x":7, "y":0}, + {"label":"8*", "x":8, "y":0}, + {"label":"9(", "x":9, "y":0}, + {"label":"0)", "x":10, "y":0}, + {"label":"-_", "x":11, "y":0}, + {"label":"=+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0, "w":2.0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[{", "x":11.5, "y":1}, + {"label":"]}", "x":12.5, "y":1}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";:", "x":10.75, "y":2}, + {"label":"'@", "x":11.75, "y":2}, + {"label":"#~", "x":12.75, "y":2}, + {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, + {"label":"Shift", "x":0, "y":3, "w":1.25}, - {"label":">\n<\n\n|", "x":1.25, "y":3}, + {"label":"\\|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, @@ -119,11 +338,82 @@ {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, - {"label":"<\n,", "x":9.25, "y":3}, - {"label":">\n.", "x":10.25, "y":3}, - {"label":"?\n/", "x":11.25, "y":3}, + {"label":",<", "x":9.25, "y":3}, + {"label":".>", "x":10.25, "y":3}, + {"label":"/?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":2.75}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.5}, + {"label":"Win", "x":1.5, "y":4}, + {"label":"Alt", "x":2.5, "y":4, "w":1.5}, + {"label":"Space", "x":4, "y":4, "w":7}, + {"label":"Alt", "x":11, "y":4, "w":1.5}, + {"label":"Win", "x":12.5, "y":4}, + {"label":"Ctrl", "x":13.5, "y":4, "w":1.5} + ] + }, + "LAYOUT_60_iso_tsangan_hhkb": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"1!", "x":1, "y":0}, + {"label":"2\"", "x":2, "y":0}, + {"label":"3\u00a3", "x":3, "y":0}, + {"label":"4$", "x":4, "y":0}, + {"label":"5%", "x":5, "y":0}, + {"label":"6^", "x":6, "y":0}, + {"label":"7&", "x":7, "y":0}, + {"label":"8*", "x":8, "y":0}, + {"label":"9(", "x":9, "y":0}, + {"label":"0)", "x":10, "y":0}, + {"label":"-_", "x":11, "y":0}, + {"label":"=+", "x":12, "y":0}, + {"label":"BS", "x":13, "y":0}, + {"label":"`~", "x":14, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[{", "x":11.5, "y":1}, + {"label":"]}", "x":12.5, "y":1}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";:", "x":10.75, "y":2}, + {"label":"'@", "x":11.75, "y":2}, + {"label":"#~", "x":12.75, "y":2}, + {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, + + {"label":"Shift", "x":0, "y":3, "w":1.25}, + {"label":"\\|", "x":1.25, "y":3}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",<", "x":9.25, "y":3}, + {"label":".>", "x":10.25, "y":3}, + {"label":"/?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"Fn", "x":14, "y":3}, + {"label":"Ctrl", "x":0, "y":4, "w":1.5}, {"label":"Win", "x":1.5, "y":4}, {"label":"Alt", "x":2.5, "y":4, "w":1.5}, @@ -132,6 +422,74 @@ {"label":"Win", "x":12.5, "y":4}, {"label":"Ctrl", "x":13.5, "y":4, "w":1.5} ] + }, + "LAYOUT_60_iso_wkl_split_rshift": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"1!", "x":1, "y":0}, + {"label":"2\"", "x":2, "y":0}, + {"label":"3\u00a3", "x":3, "y":0}, + {"label":"4$", "x":4, "y":0}, + {"label":"5%", "x":5, "y":0}, + {"label":"6^", "x":6, "y":0}, + {"label":"7&", "x":7, "y":0}, + {"label":"8*", "x":8, "y":0}, + {"label":"9(", "x":9, "y":0}, + {"label":"0)", "x":10, "y":0}, + {"label":"-_", "x":11, "y":0}, + {"label":"=+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0, "w":2.0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[{", "x":11.5, "y":1}, + {"label":"]}", "x":12.5, "y":1}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";:", "x":10.75, "y":2}, + {"label":"'@", "x":11.75, "y":2}, + {"label":"#~", "x":12.75, "y":2}, + {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, + + {"label":"Shift", "x":0, "y":3, "w":1.25}, + {"label":"\\|", "x":1.25, "y":3}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",<", "x":9.25, "y":3}, + {"label":".>", "x":10.25, "y":3}, + {"label":"/?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"Fn", "x":14, "y":3}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.5}, + {"label":"Alt", "x":2.5, "y":4, "w":1.5}, + {"label":"Space", "x":4, "y":4, "w":7}, + {"label":"Alt", "x":11, "y":4, "w":1.5}, + {"label":"Ctrl", "x":13.5, "y":4, "w":1.5} + ] } } } diff --git a/keyboards/idb/idb_60/keymaps/default/keymap.c b/keyboards/idb/idb_60/keymaps/default/keymap.c index 373ff8ceed..60cac7559f 100644 --- a/keyboards/idb/idb_60/keymaps/default/keymap.c +++ b/keyboards/idb/idb_60/keymaps/default/keymap.c @@ -2,28 +2,28 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_default( + [0] = LAYOUT_60_ansi_wkl_split_rshift( KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_LCTL, KC_LALT, KC_SPC, KC_RALT, KC_RCTL ), - [1] = LAYOUT_default( + [1] = LAYOUT_60_ansi_wkl_split_rshift( RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), - [2] = LAYOUT_default( + [2] = LAYOUT_60_ansi_wkl_split_rshift( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), - [3] = LAYOUT_default( + [3] = LAYOUT_60_ansi_wkl_split_rshift( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, diff --git a/keyboards/idb/idb_60/keymaps/via/keymap.c b/keyboards/idb/idb_60/keymaps/via/keymap.c index 373ff8ceed..60cac7559f 100644 --- a/keyboards/idb/idb_60/keymaps/via/keymap.c +++ b/keyboards/idb/idb_60/keymaps/via/keymap.c @@ -2,28 +2,28 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_default( + [0] = LAYOUT_60_ansi_wkl_split_rshift( KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_LCTL, KC_LALT, KC_SPC, KC_RALT, KC_RCTL ), - [1] = LAYOUT_default( + [1] = LAYOUT_60_ansi_wkl_split_rshift( RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), - [2] = LAYOUT_default( + [2] = LAYOUT_60_ansi_wkl_split_rshift( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), - [3] = LAYOUT_default( + [3] = LAYOUT_60_ansi_wkl_split_rshift( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, From 93b3d9b33c91f4e0a2cc4528cd1e7353d691458a Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Mon, 8 Nov 2021 04:40:30 +0000 Subject: [PATCH 452/595] Mechlovin Pisces Refactor (#15080) --- keyboards/mechlovin/pisces/config.h | 3 - keyboards/mechlovin/pisces/info.json | 84 ++++++++++++++++++- .../mechlovin/pisces/keymaps/default/keymap.c | 28 ++++--- .../mechlovin/pisces/keymaps/via/keymap.c | 52 ++++++------ keyboards/mechlovin/pisces/pisces.h | 47 +++++++++-- 5 files changed, 163 insertions(+), 51 deletions(-) diff --git a/keyboards/mechlovin/pisces/config.h b/keyboards/mechlovin/pisces/config.h index 1debf021c8..48a94eb262 100644 --- a/keyboards/mechlovin/pisces/config.h +++ b/keyboards/mechlovin/pisces/config.h @@ -72,6 +72,3 @@ along with this program. If not, see . // #define RGBLIGHT_EFFECT_RGB_TEST // #define RGBLIGHT_EFFECT_ALTERNATING #endif - -// generated by KBFirmware JSON to QMK Parser -// https://noroadsleft.github.io/kbf_qmk_converter/ diff --git a/keyboards/mechlovin/pisces/info.json b/keyboards/mechlovin/pisces/info.json index f812317c1b..57da5b4a0e 100644 --- a/keyboards/mechlovin/pisces/info.json +++ b/keyboards/mechlovin/pisces/info.json @@ -1,8 +1,85 @@ { "keyboard_name": "pisces", "url": "", - "maintainer": "qmk", + "maintainer": "mechlovin", "layouts": { + "LAYOUT_all": { + "layout": [ + {"label":"K00 (B0,E6)", "x":0, "y":0}, + {"label":"K01 (B0,B1)", "x":1, "y":0}, + {"label":"K02 (B0,B3)", "x":2, "y":0}, + {"label":"K03 (B0,D0)", "x":3, "y":0}, + {"label":"K04 (B0,D1)", "x":4, "y":0}, + {"label":"K05 (B0,D2)", "x":5, "y":0}, + {"label":"K06 (B0,D3)", "x":6, "y":0}, + {"label":"K07 (B0,D5)", "x":7, "y":0}, + {"label":"K08 (B0,F4)", "x":8, "y":0}, + {"label":"K09 (B0,F1)", "x":9, "y":0}, + {"label":"K0A (B0,D4)", "x":10, "y":0}, + {"label":"K0B (B0,D6)", "x":11, "y":0}, + {"label":"K0C (B0,D7)", "x":12, "y":0}, + {"label":"K0D (B0,B4)", "x":13, "y":0}, + {"label":"K0E (B0,B5)", "x":14, "y":0}, + + {"label":"K10 (F0,E6)", "x":0, "y":1, "w":1.5}, + {"label":"K11 (F0,B1)", "x":1.5, "y":1}, + {"label":"K12 (F0,B3)", "x":2.5, "y":1}, + {"label":"K13 (F0,D0)", "x":3.5, "y":1}, + {"label":"K14 (F0,D1)", "x":4.5, "y":1}, + {"label":"K15 (F0,D2)", "x":5.5, "y":1}, + {"label":"K16 (F0,D3)", "x":6.5, "y":1}, + {"label":"K17 (F0,D5)", "x":7.5, "y":1}, + {"label":"K18 (F0,F4)", "x":8.5, "y":1}, + {"label":"K19 (F0,F1)", "x":9.5, "y":1}, + {"label":"K1A (F0,D4)", "x":10.5, "y":1}, + {"label":"K1B (F0,D6)", "x":11.5, "y":1}, + {"label":"K1C (F0,D7)", "x":12.5, "y":1}, + {"label":"K1D (F0,B4)", "x":13.5, "y":1, "w":1.5}, + {"label":"K1E (F0,B5)", "x":15, "y":1}, + + {"label":"K20 (F5,E6)", "x":0, "y":2, "w":1.75}, + {"label":"K21 (F5,B1)", "x":1.75, "y":2}, + {"label":"K22 (F5,B3)", "x":2.75, "y":2}, + {"label":"K23 (F5,D0)", "x":3.75, "y":2}, + {"label":"K24 (F5,D1)", "x":4.75, "y":2}, + {"label":"K25 (F5,D2)", "x":5.75, "y":2}, + {"label":"K26 (F5,D3)", "x":6.75, "y":2}, + {"label":"K27 (F5,D5)", "x":7.75, "y":2}, + {"label":"K28 (F5,F4)", "x":8.75, "y":2}, + {"label":"K29 (F5,F1)", "x":9.75, "y":2}, + {"label":"K2A (F5,D4)", "x":10.75, "y":2}, + {"label":"K2B (F5,D6)", "x":11.75, "y":2}, + {"label":"K2C (F5,D7)", "x":12.75, "y":2}, + {"label":"K2D (F5,B4)", "x":13.75, "y":2, "w":1.25}, + {"label":"K2E (F5,B5)", "x":15, "y":2}, + + {"label":"K30 (F6,E6)", "x":0, "y":3, "w":1.25}, + {"label":"K31 (F6,B1)", "x":1.25, "y":3}, + {"label":"K32 (F6,B3)", "x":2.25, "y":3}, + {"label":"K33 (F6,D0)", "x":3.25, "y":3}, + {"label":"K34 (F6,D1)", "x":4.25, "y":3}, + {"label":"K35 (F6,D2)", "x":5.25, "y":3}, + {"label":"K36 (F6,D3)", "x":6.25, "y":3}, + {"label":"K37 (F6,D5)", "x":7.25, "y":3}, + {"label":"K38 (F6,F4)", "x":8.25, "y":3}, + {"label":"K39 (F6,F1)", "x":9.25, "y":3}, + {"label":"K3A (F6,D4)", "x":10.25, "y":3}, + {"label":"K3B (F6,D6)", "x":11.25, "y":3}, + {"label":"K3C (F6,D7)", "x":12.25, "y":3, "w":1.75}, + {"label":"K3D (F6,B4)", "x":14, "y":3}, + {"label":"K3E (F6,B5)", "x":15, "y":3}, + + {"label":"K40 (F7,E6)", "x":0, "y":4, "w":1.25}, + {"label":"K41 (F7,B1)", "x":1.25, "y":4, "w":1.25}, + {"label":"K42 (F7,B3)", "x":2.5, "y":4, "w":1.25}, + {"label":"K46 (F7,D3)", "x":3.75, "y":4, "w":6.25}, + {"label":"K4A (F7,D4)", "x":10, "y":4, "w":1.25}, + {"label":"K4B (F7,D6)", "x":11.25, "y":4, "w":1.25}, + {"label":"K4C (F7,D7)", "x":13, "y":4}, + {"label":"K4D (F7,B4)", "x":14, "y":4}, + {"label":"K4E (F7,B5)", "x":15, "y":4} + ] + }, "LAYOUT": { "layout": [ {"label":"K00 (B0,E6)", "x":0, "y":0}, @@ -19,6 +96,7 @@ {"label":"K0B (B0,D6)", "x":11, "y":0}, {"label":"K0C (B0,D7)", "x":12, "y":0}, {"label":"K0D (B0,B4)", "x":13, "y":0, "w":2}, + {"label":"K10 (F0,E6)", "x":0, "y":1, "w":1.5}, {"label":"K11 (F0,B1)", "x":1.5, "y":1}, {"label":"K12 (F0,B3)", "x":2.5, "y":1}, @@ -34,6 +112,7 @@ {"label":"K1C (F0,D7)", "x":12.5, "y":1}, {"label":"K1D (F0,B4)", "x":13.5, "y":1, "w":1.5}, {"label":"K1E (F0,B5)", "x":15, "y":1}, + {"label":"K20 (F5,E6)", "x":0, "y":2, "w":1.75}, {"label":"K21 (F5,B1)", "x":1.75, "y":2}, {"label":"K22 (F5,B3)", "x":2.75, "y":2}, @@ -48,6 +127,7 @@ {"label":"K2B (F5,D6)", "x":11.75, "y":2}, {"label":"K2D (F5,B4)", "x":12.75, "y":2, "w":2.25}, {"label":"K2E (F5,B5)", "x":15, "y":2}, + {"label":"K30 (F6,E6)", "x":0, "y":3, "w":2.25}, {"label":"K32 (F6,B3)", "x":2.25, "y":3}, {"label":"K33 (F6,D0)", "x":3.25, "y":3}, @@ -62,6 +142,7 @@ {"label":"K3C (F6,D7)", "x":12.25, "y":3, "w":1.75}, {"label":"K3D (F6,B4)", "x":14, "y":3}, {"label":"K3E (F6,B5)", "x":15, "y":3}, + {"label":"K40 (F7,E6)", "x":0, "y":4, "w":1.25}, {"label":"K41 (F7,B1)", "x":1.25, "y":4, "w":1.25}, {"label":"K42 (F7,B3)", "x":2.5, "y":4, "w":1.25}, @@ -74,5 +155,4 @@ ] } } - ,"meta": "https://noroadsleft.github.io/kbf_qmk_converter/" } diff --git a/keyboards/mechlovin/pisces/keymaps/default/keymap.c b/keyboards/mechlovin/pisces/keymaps/default/keymap.c index d4890a11ad..c717f92bea 100644 --- a/keyboards/mechlovin/pisces/keymaps/default/keymap.c +++ b/keyboards/mechlovin/pisces/keymaps/default/keymap.c @@ -15,20 +15,22 @@ */ #include QMK_KEYBOARD_H +#define CTL_CAP LCTL_T(KC_CAPS) + const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, - LCTL_T(KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_HOME, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RCTL, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + [0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, XXXXXXX, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + CTL_CAP, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_HOME, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RCTL, MO(1), KC_LEFT, KC_DOWN, KC_RGHT ), - [1] = LAYOUT( - KC_TRNS, BL_STEP, RGB_TOG, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_SPC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + [1] = LAYOUT_all( + _______, BL_STEP, RGB_TOG, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, KC_SPC, _______, _______, _______, _______, _______ ), -}; \ No newline at end of file +}; diff --git a/keyboards/mechlovin/pisces/keymaps/via/keymap.c b/keyboards/mechlovin/pisces/keymaps/via/keymap.c index 4ea597a9f1..874d9ccc42 100644 --- a/keyboards/mechlovin/pisces/keymaps/via/keymap.c +++ b/keyboards/mechlovin/pisces/keymaps/via/keymap.c @@ -15,34 +15,36 @@ */ #include QMK_KEYBOARD_H +#define CTL_CAP LCTL_T(KC_CAPS) + const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, - LCTL_T(KC_CAPS), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_HOME, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RCTL, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + [0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, XXXXXXX, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + CTL_CAP, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_HOME, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RCTL, MO(1), KC_LEFT, KC_DOWN, KC_RGHT ), - [1] = LAYOUT( - KC_TRNS, BL_STEP, RGB_TOG, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_SPC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + [1] = LAYOUT_all( + _______, BL_STEP, RGB_TOG, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, KC_SPC, _______, _______, _______, _______, _______ ), - [2] = LAYOUT( - KC_TRNS, BL_STEP, RGB_TOG, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_SPC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + [2] = LAYOUT_all( + _______, BL_STEP, RGB_TOG, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, KC_SPC, _______, _______, _______, _______, _______ ), - [3] = LAYOUT( - KC_TRNS, BL_STEP, RGB_TOG, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_SPC, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + [3] = LAYOUT_all( + _______, BL_STEP, RGB_TOG, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, KC_SPC, _______, _______, _______, _______, _______ ), -}; \ No newline at end of file +}; diff --git a/keyboards/mechlovin/pisces/pisces.h b/keyboards/mechlovin/pisces/pisces.h index 743b787b7c..7ff54ecdde 100644 --- a/keyboards/mechlovin/pisces/pisces.h +++ b/keyboards/mechlovin/pisces/pisces.h @@ -18,6 +18,40 @@ #include "quantum.h" +#define XXX KC_NO + +/* + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ ┌───────┐ + * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0A │0B │0C │0D │0E │ │0D │ 2u Backspace + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┐ └─┬─────┤ + * │10 │11 │12 │13 │14 │15 │16 │17 │18 │19 │1A │1B │1C │1D │1E │ │ │ + * 2.25u ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤ ┌──┴┐2D │ ISO Enter + * LShift │20 │21 │22 │23 │24 │25 │26 │27 │28 │29 │2A │2B │2D │2E │ │2C │ │ + * ┌────────┐ ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤ └───┴────┘ + * │30 │ │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3A │3B │3C │3D │3E │ + * └────────┘ ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤ + * │40 │41 │42 │46 │4A │4B │││4C │4D │4E │ + * └────┴────┴────┴────────────────────────┴────┴────┘│└───┴───┴───┘ + * ──────┴───── + * ┌──────────┐ + * │3C │ 2.75u RShift + * └──────────┘ + */ + +#define LAYOUT_all( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K46, K4A, K4B, K4C, K4D, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, K41, K42, XXX, XXX, XXX, K46, XXX, XXX, XXX, K4A, K4B, K4C, K4D, K4E }, \ +} + #define LAYOUT( \ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ @@ -25,12 +59,9 @@ K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ K40, K41, K42, K46, K4A, K4B, K4C, K4D, K4E \ ) { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, KC_NO }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, K2E }, \ - { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ - { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, K4E }, \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, XXX }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, XXX, K2D, K2E }, \ + { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, K41, K42, XXX, XXX, XXX, K46, XXX, XXX, XXX, K4A, K4B, K4C, K4D, K4E }, \ } - -// generated by KBFirmware JSON to QMK Parser -// https://noroadsleft.github.io/kbf_qmk_converter/ \ No newline at end of file From 8df90c63c1195ef3479a43af1de1f2a8821819d3 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Wed, 10 Nov 2021 03:45:59 +0000 Subject: [PATCH 453/595] Update noroadsleft userspace and keymaps (2021-11-09) (#15099) --- .../discipline/keymaps/noroadsleft/keymap.c | 2 +- keyboards/kbdfans/kbd75/keymaps/noroadsleft/keymap.c | 8 ++++---- keyboards/kbdfans/kbd75/keymaps/noroadsleft/rules.mk | 6 ++++-- keyboards/kc60/keymaps/noroadsleft/readme.md | 5 ++++- users/noroadsleft/readme.md | 4 ++-- 5 files changed, 15 insertions(+), 10 deletions(-) diff --git a/keyboards/coseyfannitutti/discipline/keymaps/noroadsleft/keymap.c b/keyboards/coseyfannitutti/discipline/keymaps/noroadsleft/keymap.c index b948c9fb1d..977e3a26f6 100644 --- a/keyboards/coseyfannitutti/discipline/keymaps/noroadsleft/keymap.c +++ b/keyboards/coseyfannitutti/discipline/keymaps/noroadsleft/keymap.c @@ -66,7 +66,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { XXXXXXX, XXXXXXX, M_MDSWP, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, - XXXXXXX, XXXXXXX, XXXXXXX, TG(_NP), XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX ) }; diff --git a/keyboards/kbdfans/kbd75/keymaps/noroadsleft/keymap.c b/keyboards/kbdfans/kbd75/keymaps/noroadsleft/keymap.c index 6a961f1716..bf0781a779 100644 --- a/keyboards/kbdfans/kbd75/keymaps/noroadsleft/keymap.c +++ b/keyboards/kbdfans/kbd75/keymaps/noroadsleft/keymap.c @@ -82,10 +82,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), [_FN] = LAYOUT_75_ansi_wkl( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, _______, - _______, KC_CALC, KC_APP, G_PUSH, _______, _______, KC_INS, KC_HOME, KC_UP, KC_END, KC_PGUP, KC_PSCR, KC_SLCK, KC_PAUS, _______, - _______, M_SALL, _______, G_FTCH, _______, _______, KC_DEL, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______, _______, _______, - _______, M_UNDO, M_CUT, M_COPY, M_PASTE, G_BRCH, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, DM_REC1, + _______, KC_CALC, KC_APP, G_PUSH, _______, _______, KC_INS, KC_HOME, KC_UP, KC_END, KC_PGUP, KC_PSCR, KC_SLCK, KC_PAUS, DM_REC2, + _______, M_SALL, _______, G_FTCH, _______, _______, KC_DEL, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, _______, DM_RSTP, DM_PLY1, + _______, M_UNDO, M_CUT, M_COPY, M_PASTE, G_BRCH, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______, DM_PLY2, _______, _______, _______, _______, _______, _______, _______, _______ ), [_SY] = LAYOUT_75_ansi_wkl( diff --git a/keyboards/kbdfans/kbd75/keymaps/noroadsleft/rules.mk b/keyboards/kbdfans/kbd75/keymaps/noroadsleft/rules.mk index 87373812c9..20e13b74a2 100644 --- a/keyboards/kbdfans/kbd75/keymaps/noroadsleft/rules.mk +++ b/keyboards/kbdfans/kbd75/keymaps/noroadsleft/rules.mk @@ -1,6 +1,8 @@ -BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite -CONSOLE_ENABLE = yes +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no +CONSOLE_ENABLE = no TAP_DANCE_ENABLE = yes +DYNAMIC_MACRO_ENABLE = yes VIA_ENABLE = no LTO_ENABLE = yes diff --git a/keyboards/kc60/keymaps/noroadsleft/readme.md b/keyboards/kc60/keymaps/noroadsleft/readme.md index dbab96d022..cddc1fd976 100644 --- a/keyboards/kc60/keymaps/noroadsleft/readme.md +++ b/keyboards/kc60/keymaps/noroadsleft/readme.md @@ -1,6 +1,6 @@ # @noroadsleft's KC60 keymap -### Last updated: May 3, 2021 16:42 (-0700) +### Last updated: November 9, 2021, 9:47 (-0800) ![](https://i.imgur.com/tzhXQYIl.jpg) @@ -47,6 +47,7 @@ My base layers are pretty standard for a 60%, with the following changes: - The Right `GUI` key has been replaced with a `MO(_MA)` key, which moves to the Macro layer when held. - The `Caps Lock` key has been replaced with a dual function `LT()` key, which opens the Function layer when held, and is `Caps Lock` when tapped. - The Left `Control` key has been replaced with a `MT(MOD_CTRL, KC_GRV)` key, which is `Ctrl` when held and ` ~ when tapped. +- The Number Row `1` through `0` keys will send Numeric Keypad keycodes instead of Number Row keycodes if tapped while `Right Alt` is active. This functionality is documented in [my userspace readme](../../../../users/noroadsleft/readme.md#emulated-numeric-keypad). ### Layer 0: Dvorak - `_DV` @@ -96,6 +97,8 @@ I used to have some macro craziness here. I've now switched to leaving my main s Arrows, Navigation keys (Insert, Home, Page Up, etc.), and Function keys are here. Also has keys for Calculator, Menu, Volume Control, and shortcuts for Select All, Undo, Cut, Copy, and Paste. Numpad Enter for when I'm working in Adobe Photoshop, because it treats Numpad Enter differently from the regular Enter key. +Similarly to my Emulated Numeric Keypad functionality, the `F1` through `F12` keys will change to `F13` through `F24` while `Right Alt` is active. This functionality is documented in [my userspace readme](../../../../users/noroadsleft/readme.md#emulated-extended-function-keys). + ![Fn layer](https://raw.githubusercontent.com/noroadsleft/qmk_images/master/keyboards/kc60/keymaps/noroadsleft/function.png) diff --git a/users/noroadsleft/readme.md b/users/noroadsleft/readme.md index bee6ee272f..1173d15ec1 100644 --- a/users/noroadsleft/readme.md +++ b/users/noroadsleft/readme.md @@ -9,7 +9,7 @@ This directory holds the code that's the same for every keyboard I use in QMK, w ## Macro Features and Custom Keycodes -### [VRSN](./noroadsleft.c#L33-L37) +### [VRSN](./noroadsleft.c#L44-L48) Outputs a string that tells me the Git commit from which my flashed firmware was built. Looks something like: @@ -29,7 +29,7 @@ Some frequently used Git commands. ### "Macro Mode" Macros and Customized Keycodes -Some of my macros and keycodes do different things depending on the value of the [`macroMode` variable](./noroadsleft.c#L23), which is [toggled between `0` and `1`](./noroadsleft.c#L116-L120) by the `M_MDSWP` custom keycode.[1](#footnotes) This is mainly at attempt to make various shortcuts use the same physical key combinations between Windows/Linux and MacOS (which I use at home and work, respectively). +Some of my macros and keycodes do different things depending on the value of the [`macroMode` variable](./noroadsleft.c#L23), which is [toggled between `0` and `1`](./noroadsleft.c#L127-L131) by the `M_MDSWP` custom keycode.[1](#footnotes) This is mainly at attempt to make various shortcuts use the same physical key combinations between Windows/Linux and MacOS (which I use at home and work, respectively). | Keycode | `macroMode == 0` | `macroMode == 1` | `macroMode == 1` with Shift | | :------------------------------------- | :--------------- | :--------------- | :------------------------------------- | From 83ab7d41efc8b400ad2870be7f46e5435b8fd550 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Wed, 10 Nov 2021 06:10:00 -0800 Subject: [PATCH 454/595] Updates to drashna keymap and minor updates to tractyl manuform (#15101) --- .../tractyl_manuform/5x6_right/config.h | 2 - .../tractyl_manuform/5x6_right/f411/config.h | 6 +- .../tractyl_manuform/5x6_right/f411/readme.md | 19 +- .../tractyl_manuform/5x6_right/f411/rules.mk | 3 + .../5x6_right/keymaps/drashna/config.h | 11 +- .../5x6_right/keymaps/drashna/keymap.c | 10 +- keyboards/handwired/tractyl_manuform/config.h | 3 - users/drashna/config.h | 20 +- users/drashna/drashna.c | 58 ++ users/drashna/drashna_font.h | 548 +++++++++++++++++- users/drashna/wrappers.h | 75 ++- 11 files changed, 693 insertions(+), 62 deletions(-) diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/config.h index cd42364b4f..ce35197f71 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/config.h +++ b/keyboards/handwired/tractyl_manuform/5x6_right/config.h @@ -41,8 +41,6 @@ along with this program. If not, see . #define DYNAMIC_KEYMAP_LAYER_COUNT 16 #define LAYER_STATE_16BIT -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 /* disable action features */ //#define NO_ACTION_LAYER diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h index 172ccf7bc2..4dbe03acbf 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h @@ -44,11 +44,11 @@ along with this program. If not, see . #define WS2812_DMA_STREAM STM32_DMA1_STREAM7 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. #define WS2812_DMA_CHANNEL 3 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. -#define RGBLED_NUM 20 +#define RGBLED_NUM 52 #define RGBLIGHT_SPLIT #define RGBLED_SPLIT \ - { 10, 10 } -#define RGBLIGHT_LMIT_VAL 80 + { 26, 26 } +#define RGBLIGHT_LIMIT_VAL 150 #define DEBUG_LED_PIN C13 diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md b/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md index 5fb2c0fc72..b387435122 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/readme.md @@ -1,16 +1,21 @@ # Drashna's Blackpill Tractyl Manuform (5x6) with a right side trackball -* VBUS mod, using PB10 +* System Timer on TIM5 +* ~~VBUS mod, using PB10~~ (*doesn't seem to work for me*) * Split Hand Pin, using PC14 -* Full Duplex Serial/USART using PA3 and PA4 on USART2 +* Full Duplex Serial/USART using PA2 and PA3 on USART2 * PWM Audio using PB1 and TIM3 and GPT on TIM4 -* PWM RGB using PA1 TIM2 -* pmw3360 sensor sharing PA5-PA7 on SPI1, with B0 as CS pin +* PWM WS2812 RGB using PA1 TIM2 * 8KB SPI EEPROM chip sharing PA5-PA7 on SPI1 with PA4 as CS pin +* pmw3360 sensor sharing PA5-PA7 on SPI1, with B0 as CS pin * Encoder using PA13 and PA14 * SSD1306 OLED display (128x64) using PB8-PB9 on I2C1 * Pull-up resistor (22k) on PA10 to fix reset issue. * Pull-up resistor (5.1k) on PA1 for WS2812 LED support, and wire it's VCC to the 5V pin. +* Pins PA9, PA11, A12 are not useable because they're used for USB connection, and can't be shared. +* Pin PB2 is used by BOOT1, and is unusable + +## Keyboard Info * Keyboard Maintainer: [Drashna Jael're](https://github.com/drashna) * Hardware Supported: [Design files](https://gitlab.com/keyboards1/dm_r_track/-/tree/master/boolean), [WeAct BlackPill (F411)](https://github.com/WeActTC/MiniSTM32F4x1), [PMW3360 Optical Sensor](https://www.tindie.com/products/jkicklighter/pmw3360-motion-sensor/) @@ -24,3 +29,9 @@ Flashing example for this keyboard: make handwired/tractyl_manuform/5x6_right/f411:default:flash See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +* **Bootmagic reset**: Hold down the top right key on the right side, or the top left key on the left side while plugging in. +* **Physical reset button**: Briefly press the "USER" button on the BlackPill +* **Keycode in layout**: Press the key mapped to `RESET`. diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/rules.mk b/keyboards/handwired/tractyl_manuform/5x6_right/f411/rules.mk index ede1a6baff..d6f972b468 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/rules.mk +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/rules.mk @@ -6,8 +6,11 @@ BOOTLOADER = stm32-dfu KEYBOARD_SHARED_EP = yes CONSOLE_ENABLE = yes +MOUSE_SHARED_EP = no EEPROM_DRIVER = spi WS2812_DRIVER = pwm SERIAL_DRIVER = usart AUDIO_DRIVER = pwm_hardware + +DEBOUNCE_TYPE = asym_eager_defer_pk diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/config.h index df3e877f98..a984ba4885 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/config.h +++ b/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/config.h @@ -16,16 +16,7 @@ #pragma once -// #define USE_I2C -// #define SELECT_SOFT_SERIAL_SPEED 1 -// #define SERIAL_USE_MULTI_TRANSACTION -#define SPLIT_MODS_ENABLE -#define EE_HANDS - #define TRACKBALL_DPI_OPTIONS { 1200, 1800, 2600, 3400 } #undef DEBOUNCE -#define DEBOUNCE 10 - -#define SOLENOID_PIN F1 -#define SOLENOID_DEFAULT_DWELL 8 +#define DEBOUNCE 15 diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c b/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c index abfec41a62..5bfc21fd14 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c +++ b/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c @@ -348,16 +348,8 @@ void render_kitty(void) { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x06, 0x04, 0x04, 0x04, 0x04, 0x05, 0x04, 0x04, 0x04, 0x07, 0x07, 0x07, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00}}; // assumes 1 frame prep stage -#ifdef SWAP_HANDS_ENABLE - extern bool swap_hands; -#endif void animation_phase(void) { -# ifdef SWAP_HANDS_ENABLE - if (swap_hands) -#else - if (tap_toggling) -#endif - { + if (tap_toggling) { anim_frame_duration = 300; current_rtogi_frame = (current_rtogi_frame + 1) % RTOGI_FRAMES; oled_write_raw_P(rtogi[abs((RTOGI_FRAMES - 1) - current_rtogi_frame)], ANIM_SIZE); diff --git a/keyboards/handwired/tractyl_manuform/config.h b/keyboards/handwired/tractyl_manuform/config.h index ec67cff1ae..cc8a7546f4 100644 --- a/keyboards/handwired/tractyl_manuform/config.h +++ b/keyboards/handwired/tractyl_manuform/config.h @@ -24,9 +24,6 @@ along with this program. If not, see . #define VENDOR_ID 0x44DD #define MANUFACTURER Drashna -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - #define USB_POLLING_INTERVAL_MS 1 /* disable debug print */ diff --git a/users/drashna/config.h b/users/drashna/config.h index 5e935827bf..f54da9e328 100644 --- a/users/drashna/config.h +++ b/users/drashna/config.h @@ -147,6 +147,9 @@ // # define OLED_FONT_5X5 // # define OLED_FONT_AZTECH // # define OLED_FONT_BMPLAIN +// # define OLED_FONT_CRACKERS +// # define OLED_FONT_HISKYF21 +# define OLED_FONT_DEAD_MEAL // # define OLED_FONT_SUPER_DIGG // # define OLED_LOGO_GMK_BAD // # define OLED_LOGO_HUE_MANITEE @@ -163,17 +166,12 @@ # define ONESHOT_TIMEOUT 3000 #endif // !ONESHOT_TIMEOUT -// this makes it possible to do rolling combos (zx) with keys that -// convert to other keys on hold (z becomes ctrl when you hold it, -// and when this option isn't enabled, z rapidly followed by x -// actually sends Ctrl-x. That's bad.) -#define IGNORE_MOD_TAP_INTERRUPT -#undef PERMISSIVE_HOLD -//#define TAPPING_FORCE_HOLD_PER_KEY -//#define RETRO_TAPPING_PER_KEY -#if !defined(KEYBOARD_kyria) && !defined(KEYBOARD_splitkb_kyria) -# define TAPPING_TERM_PER_KEY -#endif +#define IGNORE_MOD_TAP_INTERRUPT_PER_KEY +#define PERMISSIVE_HOLD_PER_KEY +#define TAPPING_FORCE_HOLD_PER_KEY +#define RETRO_TAPPING_PER_KEY +#define TAPPING_TERM_PER_KEY + #ifndef TAPPING_TOGGLE # define TAPPING_TOGGLE 1 diff --git a/users/drashna/drashna.c b/users/drashna/drashna.c index 71539e8b80..7e07a2c7c5 100644 --- a/users/drashna/drashna.c +++ b/users/drashna/drashna.c @@ -259,3 +259,61 @@ void matrix_slave_scan_user(void) { matrix_slave_scan_keymap(); } #endif + +__attribute__((weak)) uint16_t get_tapping_term(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + default: + return TAPPING_TERM; + } +} + +__attribute__((weak)) bool get_permissive_hold(uint16_t keycode, keyrecord_t *record) { + // Immediately select the hold action when another key is tapped: + // return true; + // Do not select the hold action when another key is tapped. + // return false; + switch (keycode) { + default: + return false; + } +} + +__attribute__((weak)) bool get_hold_on_other_key_press(uint16_t keycode, keyrecord_t *record) { + // Immediately select the hold action when another key is pressed. + // return true; + // Do not select the hold action when another key is pressed. + // return false; + switch (keycode) { + case QK_LAYER_TAP ... QK_LAYER_TAP_MAX: + return true; + default: + return false; + } +} + +__attribute__((weak)) bool get_ignore_mod_tap_interrupt(uint16_t keycode, keyrecord_t *record) { + // Do not force the mod-tap key press to be handled as a modifier + // if any other key was pressed while the mod-tap key is held down. + // return true; + // Force the mod-tap key press to be handled as a modifier if any + // other key was pressed while the mod-tap key is held down. + // return false; + switch (keycode) { + default: + return true; + } +} + +__attribute__((weak)) bool get_tapping_force_hold(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + default: + return false; + } +} + +__attribute__((weak)) bool get_retro_tapping(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + default: + return false; + } +} diff --git a/users/drashna/drashna_font.h b/users/drashna/drashna_font.h index 27dc8b1b5d..844292a53a 100644 --- a/users/drashna/drashna_font.h +++ b/users/drashna/drashna_font.h @@ -338,6 +338,297 @@ static const unsigned char font[] PROGMEM = { 0x22, 0x3e, 0x08, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +# elif defined(OLED_FONT_CRACKERS) + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x5E, 0x06, 0x06, 0x00, 0x00, 0x00, + 0x1E, 0x00, 0x00, 0x1E, 0x00, 0x00, + 0x20, 0x7C, 0x38, 0x38, 0x7C, 0x08, + 0x48, 0xFE, 0x64, 0x64, 0x00, 0x00, + 0x64, 0x60, 0x60, 0x18, 0x0C, 0x0C, + 0x74, 0x4A, 0x4A, 0x7E, 0x48, 0x00, + 0x1E, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x3C, 0x7E, 0x7E, 0x42, 0x00, 0x00, + 0x42, 0x7E, 0x7E, 0x3C, 0x00, 0x00, + 0x04, 0x0C, 0x04, 0x06, 0x0C, 0x04, + 0x10, 0x3C, 0x3C, 0x3C, 0x10, 0x00, + 0x00, 0x60, 0xE0, 0x00, 0x00, 0x00, + 0x08, 0x08, 0x08, 0x00, 0x00, 0x00, + 0x60, 0x60, 0x60, 0x00, 0x00, 0x00, + 0x60, 0x78, 0x78, 0x1E, 0x06, 0x00, + 0x3C, 0x3C, 0x7E, 0x42, 0x7E, 0x7E, + 0x04, 0x7E, 0x7E, 0x7E, 0x00, 0x00, + 0x76, 0x7A, 0x7E, 0x7E, 0x4C, 0x00, + 0x4A, 0x7E, 0x7E, 0x7C, 0x00, 0x00, + 0x0E, 0x08, 0x7E, 0x7E, 0x7E, 0x00, + 0x4E, 0x4E, 0x4E, 0x7A, 0x1A, 0x00, + 0x3C, 0x7E, 0x7E, 0x4A, 0x7A, 0x00, + 0x02, 0x02, 0x0A, 0x7E, 0x7E, 0x7E, + 0x7E, 0x7E, 0x7E, 0x4A, 0x7E, 0x00, + 0x0C, 0x4A, 0x7E, 0x7E, 0x3C, 0x00, + 0x66, 0x66, 0x66, 0x00, 0x00, 0x00, + 0x66, 0xE6, 0x00, 0x00, 0x00, 0x00, + 0x08, 0x3C, 0x7E, 0x7E, 0x62, 0x00, + 0x14, 0x14, 0x14, 0x00, 0x00, 0x00, + 0x62, 0x7E, 0x7E, 0x3C, 0x08, 0x00, + 0x02, 0x4A, 0x0E, 0x0E, 0x0C, 0x00, + 0x3C, 0x7E, 0x7E, 0x4A, 0x72, 0x30, + 0x7A, 0x4A, 0x7E, 0x7E, 0x7C, 0x00, + 0x7E, 0x7E, 0x7E, 0x4A, 0x24, 0x00, + 0x3C, 0x7E, 0x7E, 0x7E, 0x46, 0x00, + 0x7E, 0x7E, 0x7E, 0x62, 0x3C, 0x00, + 0x7E, 0x7E, 0x7E, 0x4A, 0x00, 0x00, + 0x7E, 0x7E, 0x7E, 0x0A, 0x00, 0x00, + 0x3C, 0x7E, 0x7E, 0x42, 0x62, 0x00, + 0x7E, 0x7E, 0x7E, 0x18, 0x7E, 0x00, + 0x7E, 0x7E, 0x7E, 0x00, 0x00, 0x00, + 0x40, 0x7E, 0x7E, 0x7E, 0x00, 0x00, + 0x7E, 0x7E, 0x7E, 0x3C, 0x66, 0x00, + 0x7E, 0x7E, 0x7E, 0x40, 0x00, 0x00, + 0x7E, 0x3E, 0x3E, 0x7C, 0x3E, 0x3E, + 0x7E, 0x3E, 0x7E, 0x7C, 0x7E, 0x00, + 0x3C, 0x3C, 0x7E, 0x62, 0x7E, 0x7E, + 0x7E, 0x7E, 0x7E, 0x22, 0x0C, 0x00, + 0x3C, 0x7E, 0x7E, 0x62, 0x7E, 0x7C, + 0x7E, 0x7E, 0x7E, 0x0A, 0x64, 0x00, + 0x4C, 0x4E, 0x4E, 0x7A, 0x1A, 0x00, + 0x02, 0x7E, 0x7E, 0x7E, 0x02, 0x00, + 0x7E, 0x60, 0x7E, 0x7E, 0x7E, 0x00, + 0x3E, 0x60, 0x7E, 0x7E, 0x3E, 0x00, + 0x7E, 0x7C, 0x7C, 0x3E, 0x7C, 0x7C, + 0x46, 0x7E, 0x08, 0x7E, 0x62, 0x62, + 0x5E, 0x5E, 0x5E, 0x70, 0x3E, 0x00, + 0x66, 0x7A, 0x7A, 0x5E, 0x66, 0x00, + 0x7E, 0x7E, 0x7E, 0x42, 0x00, 0x00, + 0x06, 0x1E, 0x1E, 0x78, 0x60, 0x00, + 0x42, 0x7E, 0x7E, 0x7E, 0x00, 0x00, + 0x0C, 0x06, 0x0C, 0x00, 0x00, 0x00, + 0x40, 0x40, 0x40, 0x40, 0x40, 0x00, + 0x02, 0x06, 0x06, 0x04, 0x00, 0x00, + 0x78, 0x24, 0x7C, 0x7C, 0x78, 0x00, + 0x7C, 0x7C, 0x7C, 0x48, 0x20, 0x00, + 0x18, 0x7C, 0x7C, 0x7C, 0x4C, 0x00, + 0x20, 0x48, 0x7C, 0x7C, 0x7C, 0x00, + 0x18, 0x7C, 0x7C, 0x74, 0x4C, 0x00, + 0x78, 0x7C, 0x7C, 0x24, 0x00, 0x00, + 0x18, 0x7C, 0x7C, 0x44, 0x74, 0x00, + 0x7C, 0x7C, 0x7C, 0x08, 0x60, 0x00, + 0x7C, 0x7C, 0x7C, 0x00, 0x00, 0x00, + 0x40, 0x7C, 0x7C, 0x7C, 0x00, 0x00, + 0x7C, 0x7C, 0x7C, 0x20, 0x48, 0x00, + 0x7C, 0x7C, 0x7C, 0x40, 0x00, 0x00, + 0x7C, 0x3C, 0x3C, 0x78, 0x3C, 0x3C, + 0x7C, 0x7C, 0x7C, 0x04, 0x78, 0x00, + 0x18, 0x18, 0x7C, 0x44, 0x7C, 0x7C, + 0x7C, 0x7C, 0x7C, 0x24, 0x08, 0x00, + 0x18, 0x18, 0x7C, 0x44, 0x7C, 0x7C, + 0x7C, 0x7C, 0x7C, 0x04, 0x00, 0x00, + 0x5C, 0x7C, 0x7C, 0x74, 0x00, 0x00, + 0x08, 0x7C, 0x7C, 0x7C, 0x48, 0x00, + 0x7C, 0x60, 0x7C, 0x7C, 0x7C, 0x00, + 0x3C, 0x60, 0x7C, 0x7C, 0x3C, 0x00, + 0x7C, 0x78, 0x78, 0x3C, 0x78, 0x78, + 0x4C, 0x3C, 0x3C, 0x78, 0x64, 0x00, + 0x4C, 0x4C, 0x4C, 0x78, 0x3C, 0x00, + 0x5C, 0x74, 0x44, 0x5C, 0x74, 0x00, + 0x24, 0x7E, 0x42, 0x42, 0x00, 0x00, + 0x7E, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x42, 0x7E, 0x24, 0x00, 0x00, 0x00, + 0x04, 0x06, 0x06, 0x02, 0x04, 0x06, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +# elif defined(OLED_FONT_EIN) + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x5F, 0x00, 0x00, 0x00, + 0x00, 0x07, 0x00, 0x07, 0x00, 0x00, + 0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00, + 0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00, + 0x23, 0x13, 0x08, 0x64, 0x62, 0x00, + 0x36, 0x49, 0x56, 0x20, 0x50, 0x00, + 0x00, 0x08, 0x07, 0x03, 0x00, 0x00, + 0x00, 0x1C, 0x22, 0x41, 0x00, 0x00, + 0x00, 0x41, 0x22, 0x1C, 0x00, 0x00, + 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00, + 0x08, 0x08, 0x3E, 0x08, 0x08, 0x00, + 0x00, 0x80, 0x70, 0x30, 0x00, 0x00, + 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, + 0x00, 0x00, 0x60, 0x60, 0x00, 0x00, + 0x20, 0x10, 0x08, 0x04, 0x02, 0x00, + 0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00, + 0x00, 0x42, 0x7F, 0x40, 0x00, 0x00, + 0x72, 0x49, 0x49, 0x49, 0x46, 0x00, + 0x21, 0x41, 0x49, 0x4D, 0x33, 0x00, + 0x18, 0x14, 0x12, 0x7F, 0x10, 0x00, + 0x27, 0x45, 0x45, 0x45, 0x39, 0x00, + 0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00, + 0x41, 0x21, 0x11, 0x09, 0x07, 0x00, + 0x36, 0x49, 0x49, 0x49, 0x36, 0x00, + 0x46, 0x49, 0x49, 0x29, 0x1E, 0x00, + 0x00, 0x00, 0x14, 0x00, 0x00, 0x00, + 0x00, 0x40, 0x34, 0x00, 0x00, 0x00, + 0x00, 0x08, 0x14, 0x22, 0x41, 0x00, + 0x14, 0x14, 0x14, 0x14, 0x14, 0x00, + 0x00, 0x41, 0x22, 0x14, 0x08, 0x00, + 0x02, 0x01, 0x59, 0x09, 0x06, 0x00, + 0x00, 0x41, 0x5D, 0x59, 0x4E, 0x00, + 0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00, + 0x7F, 0x49, 0x49, 0x49, 0x36, 0x00, + 0x3E, 0x41, 0x41, 0x41, 0x22, 0x00, + 0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00, + 0x7F, 0x49, 0x49, 0x49, 0x41, 0x00, + 0x7F, 0x09, 0x09, 0x09, 0x01, 0x00, + 0x3E, 0x41, 0x41, 0x51, 0x73, 0x00, + 0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00, + 0x00, 0x00, 0x7F, 0x00, 0x00, 0x00, + 0x20, 0x40, 0x40, 0x3F, 0x00, 0x00, + 0x7F, 0x08, 0x14, 0x22, 0x41, 0x00, + 0x7F, 0x40, 0x40, 0x40, 0x40, 0x00, + 0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00, + 0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00, + 0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00, + 0x7F, 0x09, 0x09, 0x09, 0x06, 0x00, + 0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00, + 0x7F, 0x09, 0x19, 0x29, 0x46, 0x00, + 0x26, 0x49, 0x49, 0x49, 0x32, 0x00, + 0x01, 0x01, 0x7F, 0x01, 0x01, 0x00, + 0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00, + 0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00, + 0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00, + 0x63, 0x14, 0x08, 0x14, 0x63, 0x00, + 0x03, 0x04, 0x78, 0x04, 0x03, 0x00, + 0x61, 0x59, 0x49, 0x4D, 0x43, 0x00, + 0x00, 0x7F, 0x41, 0x41, 0x41, 0x00, + 0x02, 0x04, 0x08, 0x10, 0x20, 0x00, + 0x00, 0x41, 0x41, 0x41, 0x7F, 0x00, + 0x04, 0x02, 0x01, 0x02, 0x04, 0x00, + 0x40, 0x40, 0x40, 0x40, 0x40, 0x00, + 0x00, 0x03, 0x07, 0x08, 0x00, 0x00, + 0x78, 0x14, 0x14, 0x78, 0x00, 0x00, + 0x7C, 0x54, 0x54, 0x28, 0x00, 0x00, + 0x38, 0x44, 0x44, 0x28, 0x00, 0x00, + 0x7C, 0x44, 0x44, 0x38, 0x00, 0x00, + 0x7C, 0x54, 0x54, 0x44, 0x00, 0x00, + 0x7C, 0x14, 0x14, 0x04, 0x00, 0x00, + 0x38, 0x44, 0x54, 0x34, 0x00, 0x00, + 0x7C, 0x10, 0x10, 0x7C, 0x00, 0x00, + 0x00, 0x7C, 0x00, 0x00, 0x00, 0x00, + 0x20, 0x40, 0x40, 0x3C, 0x00, 0x00, + 0x7C, 0x10, 0x28, 0x44, 0x00, 0x00, + 0x7C, 0x40, 0x40, 0x40, 0x00, 0x00, + 0x7C, 0x08, 0x70, 0x08, 0x7C, 0x00, + 0x7C, 0x08, 0x10, 0x7C, 0x00, 0x00, + 0x38, 0x44, 0x44, 0x38, 0x00, 0x00, + 0x7C, 0x14, 0x14, 0x08, 0x00, 0x00, + 0x38, 0x44, 0x24, 0x58, 0x00, 0x00, + 0x7C, 0x14, 0x34, 0x48, 0x00, 0x00, + 0x48, 0x54, 0x54, 0x24, 0x00, 0x00, + 0x04, 0x7C, 0x04, 0x00, 0x00, 0x00, + 0x3C, 0x40, 0x40, 0x3C, 0x00, 0x00, + 0x3C, 0x40, 0x20, 0x1C, 0x00, 0x00, + 0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00, + 0x44, 0x28, 0x10, 0x28, 0x44, 0x00, + 0x0C, 0x10, 0x70, 0x10, 0x0C, 0x00, + 0x44, 0x64, 0x54, 0x4C, 0x44, 0x00, + 0x00, 0x08, 0x36, 0x41, 0x00, 0x00, + 0x00, 0x00, 0x77, 0x00, 0x00, 0x00, + 0x00, 0x41, 0x36, 0x08, 0x00, 0x00, + 0x02, 0x01, 0x02, 0x04, 0x02, 0x00, + 0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00, +# elif defined(OLED_FONT_HISKYF21) + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x5C, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x0C, 0x00, 0x0C, 0x00, 0x00, 0x00, + 0x28, 0x7C, 0x28, 0x7C, 0x28, 0x00, + 0x48, 0x54, 0x54, 0xFE, 0x54, 0x54, + 0x44, 0x20, 0x10, 0x08, 0x44, 0x00, + 0x28, 0x54, 0x54, 0x54, 0x74, 0x10, + 0x0C, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x78, 0x84, 0x00, 0x00, 0x00, 0x00, + 0x84, 0x78, 0x00, 0x00, 0x00, 0x00, + 0x48, 0x30, 0x30, 0x48, 0x00, 0x00, + 0x10, 0x38, 0x10, 0x00, 0x00, 0x00, + 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x10, 0x10, 0x10, 0x10, 0x00, 0x00, + 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x60, 0x10, 0x0C, 0x00, 0x00, 0x00, + 0x38, 0x44, 0x44, 0x44, 0x44, 0x38, + 0x08, 0x7C, 0x00, 0x00, 0x00, 0x00, + 0x64, 0x54, 0x54, 0x54, 0x48, 0x00, + 0x44, 0x54, 0x54, 0x54, 0x28, 0x00, + 0x1C, 0x10, 0x10, 0x10, 0x7C, 0x00, + 0x4C, 0x54, 0x54, 0x54, 0x24, 0x00, + 0x38, 0x54, 0x54, 0x54, 0x54, 0x20, + 0x44, 0x24, 0x14, 0x0C, 0x00, 0x00, + 0x28, 0x54, 0x54, 0x54, 0x54, 0x28, + 0x08, 0x54, 0x54, 0x54, 0x54, 0x38, + 0x48, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xC8, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x10, 0x28, 0x44, 0x00, 0x00, 0x00, + 0x28, 0x28, 0x28, 0x28, 0x00, 0x00, + 0x44, 0x28, 0x10, 0x00, 0x00, 0x00, + 0x04, 0x54, 0x14, 0x14, 0x08, 0x00, + 0x38, 0x44, 0x5C, 0x54, 0x48, 0x00, + 0x60, 0x18, 0x14, 0x14, 0x18, 0x60, + 0x7C, 0x54, 0x54, 0x54, 0x58, 0x30, + 0x38, 0x44, 0x44, 0x44, 0x40, 0x00, + 0x7C, 0x44, 0x44, 0x44, 0x38, 0x00, + 0x7C, 0x54, 0x54, 0x54, 0x54, 0x40, + 0x7C, 0x14, 0x14, 0x14, 0x10, 0x00, + 0x38, 0x44, 0x44, 0x44, 0x70, 0x10, + 0x7C, 0x10, 0x10, 0x10, 0x10, 0x7C, + 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x20, 0x40, 0x40, 0x40, 0x40, 0x3C, + 0x7C, 0x10, 0x10, 0x28, 0x44, 0x00, + 0x7C, 0x40, 0x40, 0x40, 0x00, 0x00, + 0x7C, 0x08, 0x10, 0x60, 0x10, 0x08, + 0x7C, 0x08, 0x10, 0x20, 0x7C, 0x00, + 0x38, 0x44, 0x44, 0x44, 0x44, 0x38, + 0x7C, 0x24, 0x24, 0x24, 0x18, 0x00, + 0x38, 0x44, 0x64, 0x44, 0x38, 0x00, + 0x7C, 0x14, 0x14, 0x14, 0x68, 0x00, + 0x48, 0x54, 0x54, 0x54, 0x54, 0x20, + 0x04, 0x04, 0x7C, 0x04, 0x04, 0x00, + 0x3C, 0x40, 0x40, 0x40, 0x3C, 0x00, + 0x0C, 0x30, 0x40, 0x30, 0x0C, 0x00, + 0x0C, 0x30, 0x40, 0x20, 0x1C, 0x20, + 0x74, 0x2C, 0x10, 0x28, 0x44, 0x00, + 0x04, 0x08, 0x70, 0x08, 0x04, 0x00, + 0x44, 0x64, 0x54, 0x4C, 0x44, 0x00, + 0xFC, 0x84, 0x00, 0x00, 0x00, 0x00, + 0x0C, 0x10, 0x60, 0x00, 0x00, 0x00, + 0x84, 0xFC, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x7F, 0x41, 0x7F, 0x00, 0x00, + 0x40, 0x40, 0x40, 0x40, 0x00, 0x00, + 0x00, 0x7F, 0x41, 0x7F, 0x00, 0x00, + 0x60, 0x18, 0x14, 0x14, 0x18, 0x60, + 0x7C, 0x54, 0x54, 0x54, 0x58, 0x30, + 0x38, 0x44, 0x44, 0x44, 0x40, 0x00, + 0x7C, 0x44, 0x44, 0x44, 0x38, 0x00, + 0x7C, 0x54, 0x54, 0x54, 0x54, 0x40, + 0x7C, 0x14, 0x14, 0x14, 0x10, 0x00, + 0x38, 0x44, 0x44, 0x44, 0x70, 0x10, + 0x7C, 0x10, 0x10, 0x10, 0x10, 0x7C, + 0x7C, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x20, 0x40, 0x40, 0x40, 0x40, 0x3C, + 0x7C, 0x10, 0x10, 0x28, 0x44, 0x00, + 0x7C, 0x40, 0x40, 0x40, 0x00, 0x00, + 0x7C, 0x08, 0x10, 0x60, 0x10, 0x08, + 0x7C, 0x08, 0x10, 0x20, 0x7C, 0x00, + 0x38, 0x44, 0x44, 0x44, 0x44, 0x38, + 0x7C, 0x24, 0x24, 0x24, 0x18, 0x00, + 0x38, 0x44, 0x64, 0x44, 0x38, 0x00, + 0x7C, 0x14, 0x14, 0x14, 0x68, 0x00, + 0x48, 0x54, 0x54, 0x54, 0x54, 0x20, + 0x04, 0x04, 0x7C, 0x04, 0x04, 0x00, + 0x3C, 0x40, 0x40, 0x40, 0x3C, 0x00, + 0x0C, 0x30, 0x40, 0x30, 0x0C, 0x00, + 0x0C, 0x30, 0x40, 0x20, 0x1C, 0x20, + 0x74, 0x2C, 0x10, 0x28, 0x44, 0x00, + 0x04, 0x08, 0x70, 0x08, 0x04, 0x00, + 0x44, 0x64, 0x54, 0x4C, 0x44, 0x00, + 0x00, 0x7F, 0x41, 0x7F, 0x00, 0x00, + 0xFC, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x7F, 0x41, 0x7F, 0x00, 0x00, + 0x00, 0x7F, 0x41, 0x7F, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # elif defined(OLED_FONT_SUPER_DIGG) 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x58, 0x5C, 0x00, 0x00, 0x00, 0x00, @@ -435,6 +726,103 @@ static const unsigned char font[] PROGMEM = { 0xC2, 0xFE, 0x10, 0x00, 0x00, 0x00, 0x02, 0x01, 0x03, 0x04, 0x06, 0x02, 0x3C, 0x22, 0x21, 0x22, 0x3C, 0x00, +#elif defined (OLED_FONT_ZXPIX) + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x2F, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x03, 0x00, 0x03, 0x00, 0x00, 0x00, + 0x12, 0x3F, 0x12, 0x12, 0x3F, 0x12, + 0x2E, 0x2A, 0x7F, 0x2A, 0x3A, 0x00, + 0x23, 0x13, 0x08, 0x04, 0x32, 0x31, + 0x10, 0x2A, 0x25, 0x2A, 0x10, 0x20, + 0x02, 0x01, 0x00, 0x00, 0x00, 0x00, + 0x1E, 0x21, 0x00, 0x00, 0x00, 0x00, + 0x21, 0x1E, 0x00, 0x00, 0x00, 0x00, + 0x08, 0x2A, 0x1C, 0x2A, 0x08, 0x08, + 0x08, 0x08, 0x3E, 0x08, 0x08, 0x08, + 0x80, 0x60, 0x00, 0x00, 0x00, 0x00, + 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, + 0x30, 0x30, 0x00, 0x00, 0x00, 0x00, + 0x20, 0x10, 0x08, 0x04, 0x02, 0x00, + 0x1E, 0x31, 0x29, 0x25, 0x23, 0x1E, + 0x22, 0x21, 0x3F, 0x20, 0x20, 0x20, + 0x32, 0x29, 0x29, 0x29, 0x29, 0x26, + 0x12, 0x21, 0x21, 0x25, 0x25, 0x1A, + 0x18, 0x14, 0x12, 0x3F, 0x10, 0x10, + 0x17, 0x25, 0x25, 0x25, 0x25, 0x19, + 0x1E, 0x25, 0x25, 0x25, 0x25, 0x18, + 0x01, 0x01, 0x31, 0x09, 0x05, 0x03, + 0x1A, 0x25, 0x25, 0x25, 0x25, 0x1A, + 0x06, 0x29, 0x29, 0x29, 0x29, 0x1E, + 0x24, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x80, 0x64, 0x00, 0x00, 0x00, 0x00, + 0x08, 0x14, 0x22, 0x00, 0x00, 0x00, + 0x14, 0x14, 0x14, 0x14, 0x14, 0x00, + 0x22, 0x14, 0x08, 0x00, 0x00, 0x00, + 0x02, 0x01, 0x01, 0x29, 0x05, 0x02, + 0x1E, 0x21, 0x2D, 0x2B, 0x2D, 0x0E, + 0x3E, 0x09, 0x09, 0x09, 0x09, 0x3E, + 0x3F, 0x25, 0x25, 0x25, 0x25, 0x1A, + 0x1E, 0x21, 0x21, 0x21, 0x21, 0x12, + 0x3F, 0x21, 0x21, 0x21, 0x12, 0x0C, + 0x3F, 0x25, 0x25, 0x25, 0x25, 0x21, + 0x3F, 0x05, 0x05, 0x05, 0x05, 0x01, + 0x1E, 0x21, 0x21, 0x21, 0x29, 0x1A, + 0x3F, 0x04, 0x04, 0x04, 0x04, 0x3F, + 0x21, 0x21, 0x3F, 0x21, 0x21, 0x21, + 0x10, 0x20, 0x20, 0x20, 0x20, 0x1F, + 0x3F, 0x04, 0x0C, 0x0A, 0x11, 0x20, + 0x3F, 0x20, 0x20, 0x20, 0x20, 0x20, + 0x3F, 0x02, 0x04, 0x04, 0x02, 0x3F, + 0x3F, 0x02, 0x04, 0x08, 0x10, 0x3F, + 0x1E, 0x21, 0x21, 0x21, 0x21, 0x1E, + 0x3F, 0x09, 0x09, 0x09, 0x09, 0x06, + 0x1E, 0x21, 0x29, 0x31, 0x21, 0x1E, + 0x3F, 0x09, 0x09, 0x09, 0x19, 0x26, + 0x12, 0x25, 0x25, 0x25, 0x25, 0x18, + 0x01, 0x01, 0x01, 0x3F, 0x01, 0x01, + 0x1F, 0x20, 0x20, 0x20, 0x20, 0x1F, + 0x0F, 0x10, 0x20, 0x20, 0x10, 0x0F, + 0x1F, 0x20, 0x10, 0x10, 0x20, 0x1F, + 0x21, 0x12, 0x0C, 0x0C, 0x12, 0x21, + 0x01, 0x02, 0x0C, 0x38, 0x04, 0x02, + 0x21, 0x31, 0x29, 0x25, 0x23, 0x21, + 0x3F, 0x21, 0x00, 0x00, 0x00, 0x00, + 0x02, 0x04, 0x08, 0x10, 0x20, 0x00, + 0x21, 0x3F, 0x00, 0x00, 0x00, 0x00, + 0x04, 0x02, 0x3F, 0x02, 0x04, 0x00, + 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, + 0x01, 0x02, 0x00, 0x00, 0x00, 0x00, + 0x10, 0x30, 0x2A, 0x2A, 0x3C, 0x00, + 0x3F, 0x24, 0x24, 0x24, 0x18, 0x00, + 0x0C, 0x14, 0x22, 0x22, 0x00, 0x00, + 0x18, 0x24, 0x24, 0x24, 0x3F, 0x00, + 0x1C, 0x2C, 0x2A, 0x2A, 0x24, 0x00, + 0x3E, 0x05, 0x01, 0x00, 0x00, 0x00, + 0x18, 0x28, 0xA4, 0xA4, 0x7C, 0x00, + 0x3F, 0x04, 0x04, 0x0C, 0x30, 0x00, + 0x24, 0x3D, 0x20, 0x00, 0x00, 0x00, + 0x20, 0x40, 0x40, 0x3D, 0x00, 0x00, + 0x3F, 0x0C, 0x12, 0x20, 0x00, 0x00, + 0x1F, 0x20, 0x20, 0x00, 0x00, 0x00, + 0x3E, 0x02, 0x3C, 0x02, 0x3C, 0x00, + 0x3E, 0x02, 0x02, 0x02, 0x3C, 0x00, + 0x0C, 0x14, 0x22, 0x32, 0x0C, 0x00, + 0xFC, 0x24, 0x24, 0x24, 0x18, 0x00, + 0x18, 0x24, 0x24, 0x24, 0xFC, 0x80, + 0x3C, 0x04, 0x02, 0x02, 0x00, 0x00, + 0x24, 0x2C, 0x2A, 0x2A, 0x10, 0x00, + 0x02, 0x1F, 0x22, 0x20, 0x00, 0x00, + 0x1E, 0x20, 0x20, 0x20, 0x1E, 0x00, + 0x06, 0x18, 0x20, 0x18, 0x06, 0x00, + 0x1E, 0x30, 0x1C, 0x30, 0x0E, 0x00, + 0x22, 0x14, 0x08, 0x14, 0x22, 0x00, + 0x0C, 0x10, 0xA0, 0xA0, 0x7C, 0x00, + 0x22, 0x32, 0x2A, 0x26, 0x22, 0x22, + 0x0C, 0x3F, 0x21, 0x00, 0x00, 0x00, + 0x3F, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x21, 0x3F, 0x0C, 0x00, 0x00, 0x00, + 0x02, 0x01, 0x02, 0x01, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # else // default font 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x5F, 0x00, 0x00, 0x00, @@ -525,7 +913,7 @@ static const unsigned char font[] PROGMEM = { 0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00, 0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00, 0x44, 0x28, 0x10, 0x28, 0x44, 0x00, - 0x4C, 0x90, 0x10, 0x90, 0x7C, 0x00, + 0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00, 0x44, 0x64, 0x54, 0x4C, 0x44, 0x00, 0x00, 0x08, 0x36, 0x41, 0x00, 0x00, 0x00, 0x00, 0x77, 0x00, 0x00, 0x00, @@ -601,6 +989,50 @@ static const unsigned char font[] PROGMEM = { 0xE0, 0xE0, 0xC0, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +# elif defined(OLED_LOGO_LOOSE) + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0xC0, 0xE0, 0xF0, 0xF8, + 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0x00, + 0xFC, 0xFE, 0xFE, 0xFE, 0xFE, 0xFE, + 0x02, 0xF9, 0x01, 0x01, 0x05, 0x09, + 0x11, 0x22, 0x06, 0xFE, 0xFE, 0xFE, + 0xFE, 0xFE, 0xFE, 0xFE, 0x46, 0x46, + 0x44, 0x44, 0x45, 0x44, 0x29, 0x28, + 0x2A, 0x28, 0x11, 0x13, 0x05, 0x07, + 0x05, 0x07, 0x05, 0x07, 0x05, 0x07, + 0xE5, 0xE7, 0xE5, 0x07, 0x05, 0x07, + 0x05, 0x07, 0x05, 0x07, 0x05, 0x07, + 0x85, 0xC7, 0xE5, 0xE7, 0xE5, 0xE7, + 0xE5, 0xE7, 0xE5, 0xC7, 0x85, 0x07, + 0x85, 0xC7, 0xE5, 0xE7, 0xE5, 0xE7, + 0xE5, 0xE7, 0xE5, 0xC7, 0x85, 0x07, + 0x85, 0xC7, 0xE5, 0xE7, 0xE5, 0xE7, + 0xE5, 0xE7, 0xE5, 0xE7, 0xE5, 0x07, + 0xE5, 0xE7, 0xE5, 0xE7, 0xE5, 0xE7, + 0xE5, 0xE7, 0xE5, 0xE7, 0xE5, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +# elif defined(OLED_LOGO_SKEEB) + 0xC0, 0x20, 0x10, 0x08, 0x04, 0x02, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, + 0x01, 0x01, 0x03, 0x07, 0x0F, 0x1F, + 0x3F, 0x7F, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x01, 0x01, + 0xFF, 0xFF, 0x01, 0x01, 0xFF, 0xFF, + 0x01, 0x01, 0xFF, 0xFF, 0x19, 0x19, + 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, + 0x01, 0x01, 0xFF, 0xFF, 0x81, 0x81, + 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, + 0x19, 0x19, 0xFF, 0xFF, 0xF9, 0xF9, + 0xF9, 0xF9, 0x01, 0x01, 0xF9, 0xF9, + 0xF9, 0xF9, 0xFF, 0xFF, 0x99, 0x99, + 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, + 0xF9, 0xF9, 0xFF, 0xFF, 0x19, 0x19, + 0x99, 0x99, 0x99, 0x99, 0x99, 0x99, + 0x67, 0x67, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x7F, 0x3F, + 0x1F, 0x0F, 0x07, 0x03, 0x01, 0x01, + 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, + 0x02, 0x04, 0x08, 0x10, 0x20, 0xC0, # else 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x40, 0x40, 0xF0, 0xF8, 0xF8, @@ -705,6 +1137,50 @@ static const unsigned char font[] PROGMEM = { 0x1C, 0x9D, 0xDF, 0xDF, 0xDF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +# elif defined(OLED_LOGO_LOOSE) + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xE3, 0xC1, 0xC1, 0x00, + 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, + 0x00, 0xFF, 0x00, 0x00, 0x80, 0x00, + 0x1C, 0x3E, 0x7F, 0xFF, 0xFF, 0xFF, + 0xFF, 0xFF, 0xFF, 0xFF, 0x22, 0x22, + 0x22, 0x22, 0x22, 0x22, 0x22, 0x22, + 0x22, 0x22, 0x22, 0x14, 0x14, 0x14, + 0x14, 0x14, 0x08, 0x08, 0x00, 0x00, + 0xFF, 0xFF, 0xFF, 0x80, 0x80, 0x80, + 0x80, 0x80, 0x80, 0x80, 0x80, 0x00, + 0xFF, 0xFF, 0xFF, 0xFF, 0x80, 0xBE, + 0x80, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, + 0xFF, 0xFF, 0xFF, 0xFF, 0x81, 0xBD, + 0x81, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, + 0x8F, 0x9F, 0x9C, 0x9C, 0x9C, 0x9C, + 0x9C, 0x9C, 0x9C, 0xFC, 0xF8, 0x00, + 0xFF, 0xFF, 0xFF, 0x9C, 0x9C, 0x9C, + 0x9C, 0x9C, 0x9C, 0x80, 0x80, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +# elif defined(OLED_LOGO_SKEEB) + 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x01, 0x03, 0x07, + 0x0F, 0x0F, 0x0F, 0x0F, 0x08, 0x08, + 0x0F, 0x0F, 0x0E, 0x0E, 0x0F, 0x0F, + 0x08, 0x08, 0x0F, 0x0F, 0x08, 0x08, + 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, + 0x08, 0x08, 0x0F, 0x0F, 0x09, 0x09, + 0x09, 0x09, 0xF9, 0xF9, 0x09, 0x09, + 0x08, 0x08, 0x0F, 0x0F, 0x0F, 0x0F, + 0x0F, 0x0F, 0x08, 0x08, 0x0F, 0x0F, + 0x0F, 0x0F, 0x0F, 0x0F, 0x09, 0x09, + 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, + 0x09, 0x09, 0x0F, 0x0F, 0x08, 0x08, + 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, + 0x08, 0x08, 0x0F, 0x0F, 0x0F, 0x0F, + 0x07, 0x03, 0x01, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, # else 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x49, 0x49, 0x49, 0xFF, 0xFF, 0xFF, @@ -738,7 +1214,7 @@ static const unsigned char font[] PROGMEM = { 0x20, 0x30, 0x78, 0x7F, 0x3B, 0x00, 0x03, 0x00, 0x0F, 0x7F, 0x0F, 0x0F, 0x0F, 0x7F, 0x0F, 0x00, 0x03, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x44, 0x28, 0xFF, 0x5A, 0x24, 0xF0, 0xFE, 0xF1, 0x91, 0xF6, 0xF0, 0xF0, 0xFC, 0xF2, 0x92, 0xFC, 0xF0, @@ -809,16 +1285,42 @@ static const unsigned char font[] PROGMEM = { 0x07, 0x07, 0x03, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -#else - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x01, 0x01, 0x01, 0x07, 0x0F, 0x0F, - 0x7F, 0x0F, 0x7F, 0x0F, 0x0F, 0x7E, - 0x0F, 0x0F, 0x7F, 0x0F, 0x7F, 0x0F, - 0x0F, 0x07, 0x01, 0x01, 0x01, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x01, 0x01, 0x00, +# elif defined(OLED_LOGO_LOOSE) 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x01, 0x03, 0x07, 0x0F, + 0x0F, 0x0F, 0x0F, 0x0F, 0x0F, 0x00, + 0x1F, 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, + 0x20, 0x47, 0x48, 0x50, 0x40, 0x41, + 0x42, 0x24, 0x30, 0x3F, 0x3F, 0x3F, + 0x3F, 0x3F, 0x3F, 0x3F, 0x31, 0x31, + 0x11, 0x51, 0x11, 0x11, 0x4A, 0x0A, + 0x2A, 0x0A, 0x44, 0x64, 0x50, 0x70, + 0x50, 0x70, 0x50, 0x70, 0x50, 0x70, + 0x53, 0x73, 0x53, 0x73, 0x53, 0x73, + 0x53, 0x73, 0x53, 0x73, 0x53, 0x70, + 0x50, 0x71, 0x53, 0x73, 0x53, 0x73, + 0x53, 0x73, 0x53, 0x71, 0x50, 0x70, + 0x50, 0x71, 0x53, 0x73, 0x53, 0x73, + 0x53, 0x73, 0x53, 0x71, 0x50, 0x70, + 0x53, 0x73, 0x53, 0x73, 0x53, 0x73, + 0x53, 0x73, 0x53, 0x73, 0x51, 0x70, + 0x53, 0x73, 0x53, 0x73, 0x53, 0x73, + 0x53, 0x73, 0x53, 0x73, 0x53, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +# elif defined(OLED_LOGO_SKEEB) + 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xFF, 0x08, 0x08, 0x08, 0x08, 0x08, + 0x08, 0x08, 0x08, 0x08, 0x08, 0xFF, + 0x08, 0x08, 0x0F, 0x0F, 0x08, 0x08, + 0x03, 0x04, 0x08, 0x10, 0x20, 0x40, + 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, + 0x40, 0x20, 0x10, 0x08, 0x04, 0x03, + 0x08, 0x08, 0x08, 0x08, 0x08, 0x08, + 0x00, 0x00, 0xFF, 0xFF, 0x00, 0x00, + 0x80, 0xC0, 0xE0, 0xF0, 0xF8, 0xF8, + 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, 0xF8, + 0xF8, 0xF8, 0xF0, 0xE0, 0xC0, 0x80, + 0x01, 0x02, 0xFC, 0xF8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, @@ -826,14 +1328,18 @@ static const unsigned char font[] PROGMEM = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, +#else 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x01, 0x01, 0x01, 0x07, 0x0F, 0x0F, + 0x7F, 0x0F, 0x7F, 0x0F, 0x0F, 0x7E, + 0x0F, 0x0F, 0x7F, 0x0F, 0x7F, 0x0F, + 0x0F, 0x07, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, -#endif - -// third icon section 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, @@ -845,6 +1351,20 @@ static const unsigned char font[] PROGMEM = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +#endif + +// third icon section + 0x1F, 0x05, 0x00, 0x02, 0x1F, 0x00, + 0x1F, 0x05, 0x00, 0x1D, 0x17, 0x00, + 0x1F, 0x05, 0x00, 0x15, 0x1F, 0x00, + 0x1F, 0x05, 0x00, 0x07, 0x1C, 0x00, + 0x1F, 0x05, 0x00, 0x17, 0x1D, 0x00, + 0x1F, 0x05, 0x00, 0x1F, 0x1D, 0x00, + 0x1F, 0x05, 0x00, 0x01, 0x1F, 0x00, + 0x1F, 0x05, 0x00, 0x1F, 0x1F, 0x00, + 0x1F, 0x05, 0x00, 0x07, 0x1F, 0x00, + 0x1F, 0x05, 0x00, 0x70, 0x77, 0x00, + 0x1F, 0x05, 0x00, 0x00, 0x77, 0x00, // fourth icon section 0x00, 0x1C, 0x1C, 0x3E, 0x7F, 0x7F, @@ -874,7 +1394,7 @@ static const unsigned char font[] PROGMEM = { 0x00, 0x00, 0x1C, 0x14, 0x1C, 0x08, 0x18, 0x08, 0x18, 0x00, 0x00, 0x00, 0x00, 0x70, 0xC8, 0xEE, 0xF9, 0x70, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x1F, 0x05, 0x00, 0x10, 0x77, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, diff --git a/users/drashna/wrappers.h b/users/drashna/wrappers.h index 8ac252926e..c1ae815579 100644 --- a/users/drashna/wrappers.h +++ b/users/drashna/wrappers.h @@ -167,13 +167,76 @@ NOTE: These are all the same length. If you do a search/replace #define _________________HALMAK_R3_________________ KC_G, KC_P, KC_X, KC_K, KC_Y -#define _________________HALMAK_L1_________________ KC_W, KC_L, KC_R, KC_B, KC_Z -#define _________________HALMAK_L2_________________ KC_S, KC_H, KC_N, KC_T, KC_COMM -#define _________________HALMAK_L3_________________ KC_F, KC_M, KC_V, KC_V, KC_SLASH +#define __________________ISRT_L1__________________ KC_W, KC_C, KC_L, KC_M, KC_K +#define __________________ISRT_L2__________________ KC_I, KC_S, KC_R, KC_T, KC_G +#define __________________ISRT_L3__________________ KC_Q, KC_V, KC_W, KC_D, KC_J -#define _________________HALMAK_R1_________________ KC_SCLN, KC_Q, KC_U, KC_D, KC_J -#define _________________HALMAK_R2_________________ KC_DOT, KC_A, KC_E, KC_O, KC_I, KC_QUOTE -#define _________________HALMAK_R3_________________ KC_G, KC_P, KC_X, KC_K, KC_Y +#define __________________ISRT_R1__________________ KC_Z, KC_F, KC_U, KC_COMM, KC_QUOTE +#define __________________ISRT_R2__________________ KC_P, KC_N, KC_E, KC_A, KC_O, KC_SCLN +#define __________________ISRT_R3__________________ KC_B, KC_H, KC_SLSH, KC_DOT, KC_X + + +#define __________________SOUL_L1__________________ KC_Q, KC_W, KC_L, KC_D, KC_P +#define __________________SOUL_L2__________________ KC_A, KC_S, KC_R, KC_T, KC_G +#define __________________SOUL_L3__________________ KC_Z, KC_X, KC_C, KC_V, KC_J + +#define __________________SOUL_R1__________________ KC_K, KC_M, KC_U, KC_Y, KC_SCLN +#define __________________SOUL_R2__________________ KC_F, KC_N, KC_E, KC_I, KC_O, KC_QUOTE +#define __________________SOUL_R3__________________ KC_B, KC_H, KC_COMM, KC_DOT, KC_SLSH + + +#define __________________NIRO_L1__________________ KC_Q, KC_W, KC_U, KC_D, KC_P +#define __________________NIRO_L2__________________ KC_A, KC_S, KC_E, KC_T, KC_G +#define __________________NIRO_L3__________________ KC_Z, KC_X, KC_C, KC_V, KC_B + +#define __________________NIRO_R1__________________ KC_J, KC_F, KC_Y, KC_L, KC_SCLN +#define __________________NIRO_R2__________________ KC_H, KC_N, KC_I, KC_R, KC_O, KC_QUOTE +#define __________________NIRO_R3__________________ KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH + + +#define _________________ASSET_L1__________________ KC_Q, KC_W, KC_J, KC_F, KC_G +#define _________________ASSET_L2__________________ KC_A, KC_S, KC_E, KC_T, KC_D +#define _________________ASSET_L3__________________ KC_Z, KC_X, KC_C, KC_V, KC_B + +#define _________________ASSET_R1__________________ KC_Y, KC_P, KC_U, KC_L, KC_SCLN +#define _________________ASSET_R2__________________ KC_H, KC_N, KC_I, KC_O, KC_R, KC_QUOTE +#define _________________ASSET_R3__________________ KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH + + +#define _________________MTGAP_L1__________________ KC_Y, KC_P, KC_O, KC_U, KC_J +#define _________________MTGAP_L2__________________ KC_I, KC_N, KC_E, KC_A, KC_COMM +#define _________________MTGAP_L3__________________ KC_Q, KC_Z, KC_SLSH, KC_DOT, KC_SCLN + +#define _________________MTGAP_R1__________________ KC_K, KC_D, KC_L, KC_C, KC_W +#define _________________MTGAP_R2__________________ KC_M, KC_H, KC_T, KC_S, KC_R, KC_QUOTE +#define _________________MTGAP_R3__________________ KC_B, KC_F, KC_G, KC_V, KC_X + + +#define _________________MINIMAK_L1________________ KC_Q, KC_W, KC_D, KC_R, KC_K +#define _________________MINIMAK_L2________________ KC_A, KC_S, KC_T, KC_F, KC_G +#define _________________MINIMAK_L3________________ KC_Z, KC_X, KC_C, KC_V, KC_B + +#define _________________MINIMAK_R1________________ KC_Y, KC_U, KC_I, KC_O, KC_P +#define _________________MINIMAK_R2________________ KC_H, KC_J, KC_E, KC_L, KC_SCLN, KC_QUOT +#define _________________MINIMAK_R3________________ KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH + + +#define ________________MINIMAK_8_L1_______________ KC_Q, KC_W, KC_D, KC_R, KC_K +#define ________________MINIMAK_8_L2_______________ KC_A, KC_S, KC_T, KC_F, KC_G +#define ________________MINIMAK_8_L3_______________ KC_Z, KC_X, KC_C, KC_V, KC_B + +#define ________________MINIMAK_8_R1_______________ KC_Y, KC_U, KC_I, KC_L, KC_P +#define ________________MINIMAK_8_R2_______________ KC_H, KC_N, KC_E, KC_O, KC_SCLN, KC_QUOT +#define ________________MINIMAK_8_R3_______________ KC_J, KC_M, KC_COMM, KC_DOT, KC_SLSH + + +#define _______________MINIMAK_12_L1_______________ KC_Q, KC_W, KC_D, KC_F, KC_K +#define _______________MINIMAK_12_L2_______________ KC_A, KC_S, KC_T, KC_R, KC_G +#define _______________MINIMAK_12_L3_______________ KC_Z, KC_X, KC_C, KC_V, KC_B + +#define _______________MINIMAK_12_R1_______________ KC_Y, KC_U, KC_I, KC_L, KC_SCLN +#define _______________MINIMAK_12_R2_______________ KC_H, KC_N, KC_E, KC_O, KC_P, KC_QUOT +#define _______________MINIMAK_12_R3_______________ KC_J, KC_M, KC_COMM, KC_DOT, KC_SLSH #define ________________NUMBER_LEFT________________ KC_1, KC_2, KC_3, KC_4, KC_5 From 40ac8d1536321b251246fd74d19ec0c72648ec69 Mon Sep 17 00:00:00 2001 From: Moritz Date: Wed, 10 Nov 2021 15:22:53 +0100 Subject: [PATCH 455/595] [Keyboard] Teleport numpad (#14905) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- keyboards/teleport/numpad/config.h | 39 +++++++++++++++++++ keyboards/teleport/numpad/info.json | 27 +++++++++++++ .../teleport/numpad/keymaps/default/keymap.c | 34 ++++++++++++++++ .../teleport/numpad/keymaps/via/keymap.c | 35 +++++++++++++++++ .../teleport/numpad/keymaps/via/rules.mk | 1 + keyboards/teleport/numpad/numpad.c | 16 ++++++++ keyboards/teleport/numpad/numpad.h | 33 ++++++++++++++++ keyboards/teleport/numpad/readme.md | 20 ++++++++++ keyboards/teleport/numpad/rules.mk | 22 +++++++++++ 9 files changed, 227 insertions(+) create mode 100644 keyboards/teleport/numpad/config.h create mode 100644 keyboards/teleport/numpad/info.json create mode 100644 keyboards/teleport/numpad/keymaps/default/keymap.c create mode 100644 keyboards/teleport/numpad/keymaps/via/keymap.c create mode 100644 keyboards/teleport/numpad/keymaps/via/rules.mk create mode 100644 keyboards/teleport/numpad/numpad.c create mode 100644 keyboards/teleport/numpad/numpad.h create mode 100644 keyboards/teleport/numpad/readme.md create mode 100644 keyboards/teleport/numpad/rules.mk diff --git a/keyboards/teleport/numpad/config.h b/keyboards/teleport/numpad/config.h new file mode 100644 index 0000000000..f3573483b7 --- /dev/null +++ b/keyboards/teleport/numpad/config.h @@ -0,0 +1,39 @@ +/* +Copyright 2021 Moritz Plattner +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x7470 //"tp" +#define PRODUCT_ID 0x0001 +#define DEVICE_VER 0x0001 +#define MANUFACTURER tlprt +#define PRODUCT NumPad + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 4 + +/* Keyboard Matrix Assignments */ +#define MATRIX_ROW_PINS { D7, D4, D6, B4, B5 } +#define MATRIX_COL_PINS { F6, F5, F7, F4 } +#define UNUSED_PINS { B0, B1, B2, B3, B6, B7, D0, D1, D2, D3, D5, F0, F1, E6, C6, C7 } + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 diff --git a/keyboards/teleport/numpad/info.json b/keyboards/teleport/numpad/info.json new file mode 100644 index 0000000000..a05b7440ba --- /dev/null +++ b/keyboards/teleport/numpad/info.json @@ -0,0 +1,27 @@ +{ + "keyboard_name": "tlprt_NumPad", + "maintainer": "ebastler", + "layouts": { + "LAYOUT_numpad_5x4": { + "layout": [ + {"label":"Num Lock", "x":0, "y":0}, + {"label":"/", "x":1, "y":0}, + {"label":"*", "x":2, "y":0}, + {"label":"-", "x":3, "y":0}, + {"label":"7", "x":0, "y":1}, + {"label":"8", "x":1, "y":1}, + {"label":"9", "x":2, "y":1}, + {"label":"4", "x":0, "y":2}, + {"label":"5", "x":1, "y":2}, + {"label":"6", "x":2, "y":2}, + {"label":"+", "x":3, "y":1, "h":2}, + {"label":"1", "x":0, "y":3}, + {"label":"2", "x":1, "y":3}, + {"label":"3", "x":2, "y":3}, + {"label":"0", "x":0, "y":4, "w":2}, + {"label":",", "x":2, "y":4}, + {"label":"Enter", "x":3, "y":3, "h":2} + ] + } + } +} diff --git a/keyboards/teleport/numpad/keymaps/default/keymap.c b/keyboards/teleport/numpad/keymaps/default/keymap.c new file mode 100644 index 0000000000..64f805f5da --- /dev/null +++ b/keyboards/teleport/numpad/keymaps/default/keymap.c @@ -0,0 +1,34 @@ +/* Copyright 2021 Moritz Plattner + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_numpad_5x4( + LT(1, KC_NLCK), KC_PSLS, KC_PAST, KC_PMNS, + KC_P7, KC_P8, KC_P9, + KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_P1, KC_P2, KC_P3, + KC_P0, KC_PDOT, KC_PENT + ), + + [1] = LAYOUT_numpad_5x4( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, RESET + ), diff --git a/keyboards/teleport/numpad/keymaps/via/keymap.c b/keyboards/teleport/numpad/keymaps/via/keymap.c new file mode 100644 index 0000000000..28271c9d58 --- /dev/null +++ b/keyboards/teleport/numpad/keymaps/via/keymap.c @@ -0,0 +1,35 @@ +/* Copyright 2021 Moritz Plattner + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_numpad_5x4( + LT(1, KC_NLCK), KC_PSLS, KC_PAST, KC_PMNS, + KC_P7, KC_P8, KC_P9, + KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_P1, KC_P2, KC_P3, + KC_P0, KC_PDOT, KC_PENT + ), + + [1] = LAYOUT_numpad_5x4( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, RESET + ), +}; diff --git a/keyboards/teleport/numpad/keymaps/via/rules.mk b/keyboards/teleport/numpad/keymaps/via/rules.mk new file mode 100644 index 0000000000..036bd6d1c3 --- /dev/null +++ b/keyboards/teleport/numpad/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes \ No newline at end of file diff --git a/keyboards/teleport/numpad/numpad.c b/keyboards/teleport/numpad/numpad.c new file mode 100644 index 0000000000..375e240589 --- /dev/null +++ b/keyboards/teleport/numpad/numpad.c @@ -0,0 +1,16 @@ +/* Copyright 2021 Moritz Plattner + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "numpad.h" diff --git a/keyboards/teleport/numpad/numpad.h b/keyboards/teleport/numpad/numpad.h new file mode 100644 index 0000000000..9c7413cd8e --- /dev/null +++ b/keyboards/teleport/numpad/numpad.h @@ -0,0 +1,33 @@ +/* Copyright 2021 Moritz Plattner + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +#define LAYOUT_numpad_5x4( \ + K00, K01, K02, K03, \ + K10, K11, K12, \ + K20, K21, K22, K13, \ + K30, K31, K32, \ + K40, K41, K42 \ +) { \ + { K00, K01, K02, K03 }, \ + { K10, K11, K12, K13 }, \ + { K20, K21, K22, KC_NO }, \ + { K30, K31, K32, KC_NO }, \ + { K40, K41, K42, KC_NO }, \ +} diff --git a/keyboards/teleport/numpad/readme.md b/keyboards/teleport/numpad/readme.md new file mode 100644 index 0000000000..aebde6f160 --- /dev/null +++ b/keyboards/teleport/numpad/readme.md @@ -0,0 +1,20 @@ +# The Teleport NumPad + +* Keyboard Maintainer: [ebastler](https://github.com/ebastler) +* Hardware Supported: Teleport NumPad +* Hardware Availability: [TheTeleport.de](https://www.theteleport.de/) + +Make example for this keyboard (after setting up your build environment): + + make teleport/numpad:default + +Flash example for this keyboard: + + make teleport/numpad:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader Enter the bootloader in 3 ways: +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (In this case NumLock) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB +* **Keycode in layout**: Press the key mapped to `RESET` (With the default keymap, hold NumLock, then press Enter) \ No newline at end of file diff --git a/keyboards/teleport/numpad/rules.mk b/keyboards/teleport/numpad/rules.mk new file mode 100644 index 0000000000..d13c9980f7 --- /dev/null +++ b/keyboards/teleport/numpad/rules.mk @@ -0,0 +1,22 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow + +LAYOUTS = numpad_5x4 From 6ccf774ea5f0b07ac02c31ddc196e1c921898038 Mon Sep 17 00:00:00 2001 From: MechMerlin <30334081+mechmerlin@users.noreply.github.com> Date: Wed, 10 Nov 2021 06:24:16 -0800 Subject: [PATCH 456/595] [Keyboard] Element Hotswap PCB (#15082) Co-authored-by: Drashna Jaelre --- keyboards/neokeys/g67/element_hs/config.h | 66 +++++++++++++++ keyboards/neokeys/g67/element_hs/element_hs.c | 17 ++++ keyboards/neokeys/g67/element_hs/element_hs.h | 34 ++++++++ keyboards/neokeys/g67/element_hs/info.json | 82 +++++++++++++++++++ .../g67/element_hs/keymaps/default/keymap.c | 34 ++++++++ .../g67/element_hs/keymaps/via/keymap.c | 49 +++++++++++ .../g67/element_hs/keymaps/via/rules.mk | 3 + keyboards/neokeys/g67/element_hs/readme.md | 19 +++++ keyboards/neokeys/g67/element_hs/rules.mk | 25 ++++++ 9 files changed, 329 insertions(+) create mode 100644 keyboards/neokeys/g67/element_hs/config.h create mode 100644 keyboards/neokeys/g67/element_hs/element_hs.c create mode 100644 keyboards/neokeys/g67/element_hs/element_hs.h create mode 100644 keyboards/neokeys/g67/element_hs/info.json create mode 100644 keyboards/neokeys/g67/element_hs/keymaps/default/keymap.c create mode 100644 keyboards/neokeys/g67/element_hs/keymaps/via/keymap.c create mode 100644 keyboards/neokeys/g67/element_hs/keymaps/via/rules.mk create mode 100644 keyboards/neokeys/g67/element_hs/readme.md create mode 100644 keyboards/neokeys/g67/element_hs/rules.mk diff --git a/keyboards/neokeys/g67/element_hs/config.h b/keyboards/neokeys/g67/element_hs/config.h new file mode 100644 index 0000000000..3efc322d8d --- /dev/null +++ b/keyboards/neokeys/g67/element_hs/config.h @@ -0,0 +1,66 @@ +/* Copyright 2021 MechMerlin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4E4B // "NK" +#define PRODUCT_ID 0x5049 +#define DEVICE_VER 0x0100 +#define MANUFACTURER NEO Keys +#define PRODUCT Element G67 Hotswap + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { B0, B1, B2, B3, F7 } +#define MATRIX_COL_PINS { C7, F6, F5, F4, F1, B7, D5, D1, D2, D3, D4, D0, D6, D7, B4 } + +#define DIODE_DIRECTION COL2ROW + +#if defined(RGBLIGHT_ENABLE) + #define RGB_DI_PIN F0 + #define RGBLED_NUM 77 + #define RGBLIGHT_HUE_STEP 8 + #define RGBLIGHT_SAT_STEP 8 + #define RGBLIGHT_VAL_STEP 8 + #define RGBLIGHT_LIMIT_VAL 150 /* The maximum brightness level */ + #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE +#endif diff --git a/keyboards/neokeys/g67/element_hs/element_hs.c b/keyboards/neokeys/g67/element_hs/element_hs.c new file mode 100644 index 0000000000..c5dd40fe6a --- /dev/null +++ b/keyboards/neokeys/g67/element_hs/element_hs.c @@ -0,0 +1,17 @@ +/* Copyright 2021 MechMerlin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "element_hs.h" diff --git a/keyboards/neokeys/g67/element_hs/element_hs.h b/keyboards/neokeys/g67/element_hs/element_hs.h new file mode 100644 index 0000000000..cfb7d67b60 --- /dev/null +++ b/keyboards/neokeys/g67/element_hs/element_hs.h @@ -0,0 +1,34 @@ +/* Copyright 2021 MechMerlin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +#define LAYOUT_65_ansi_blocker( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K2E, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K43, K46, K4A, K4B, K4C, K4D, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO, K2D, K2E }, \ + { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, K41, KC_NO, K43, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, K4E }, \ +} + diff --git a/keyboards/neokeys/g67/element_hs/info.json b/keyboards/neokeys/g67/element_hs/info.json new file mode 100644 index 0000000000..3b20d10402 --- /dev/null +++ b/keyboards/neokeys/g67/element_hs/info.json @@ -0,0 +1,82 @@ +{ + "keyboard_name": "NEO Keys Element Hotswap", + "url": "", + "maintainer": "qmk", + "layouts": { + "LAYOUT_65_ansi_blocker": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0, "w":2}, + {"x":15, "y":0}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + {"x":15, "y":1}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + {"x":15, "y":2}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3}, + {"x":12.25, "y":3, "w":1.75}, + {"x":14, "y":3}, + {"x":15, "y":3}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":6.25}, + {"x":10, "y":4, "w":1.25}, + {"x":11.25, "y":4, "w":1.25}, + {"x":13, "y":4}, + {"x":14, "y":4}, + {"x":15, "y":4} + ] + } + } +} diff --git a/keyboards/neokeys/g67/element_hs/keymaps/default/keymap.c b/keyboards/neokeys/g67/element_hs/keymaps/default/keymap.c new file mode 100644 index 0000000000..e617a80b52 --- /dev/null +++ b/keyboards/neokeys/g67/element_hs/keymaps/default/keymap.c @@ -0,0 +1,34 @@ +/* Copyright 2021 MechMerlin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_65_ansi_blocker( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_TILD, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_65_ansi_blocker( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_HOME, + _______, RGB_TOG, KC_UP, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_PSCR, KC_SLCK, KC_PAUS, _______, KC_END, + _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, KC_INS, KC_HOME, KC_PGUP, _______, KC_PGUP, + _______, RESET, BL_DEC, BL_TOGG, BL_INC, KC_VOLD, KC_MUTE, KC_VOLU, _______, KC_DEL, KC_END, KC_PGDN, _______, KC_PGDN, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; diff --git a/keyboards/neokeys/g67/element_hs/keymaps/via/keymap.c b/keyboards/neokeys/g67/element_hs/keymaps/via/keymap.c new file mode 100644 index 0000000000..5fb2edac5e --- /dev/null +++ b/keyboards/neokeys/g67/element_hs/keymaps/via/keymap.c @@ -0,0 +1,49 @@ +/* Copyright 2021 MechMerlin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_65_ansi_blocker( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_TILD, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_65_ansi_blocker( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_HOME, + _______, RGB_TOG, KC_UP, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_PSCR, KC_SLCK, KC_PAUS, _______, KC_END, + _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, KC_INS, KC_HOME, KC_PGUP, _______, KC_PGUP, + _______, RESET, BL_DEC, BL_TOGG, BL_INC, KC_VOLD, KC_MUTE, KC_VOLU, _______, KC_DEL, KC_END, KC_PGDN, _______, KC_PGDN, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [2] = LAYOUT_65_ansi_blocker( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + + ), + [3] = LAYOUT_65_ansi_blocker( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; diff --git a/keyboards/neokeys/g67/element_hs/keymaps/via/rules.mk b/keyboards/neokeys/g67/element_hs/keymaps/via/rules.mk new file mode 100644 index 0000000000..152460f304 --- /dev/null +++ b/keyboards/neokeys/g67/element_hs/keymaps/via/rules.mk @@ -0,0 +1,3 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes +KEY_LOCK_ENABLE = no diff --git a/keyboards/neokeys/g67/element_hs/readme.md b/keyboards/neokeys/g67/element_hs/readme.md new file mode 100644 index 0000000000..02f63e9f9e --- /dev/null +++ b/keyboards/neokeys/g67/element_hs/readme.md @@ -0,0 +1,19 @@ +# Element G67 Hotswap + +A blockered 65% with per-key RGB, underglow, and USB Type C. + +* Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) +* Hardware Supported: Element G67 Hotswap (ATmega32U4) +* Hardware Availability: [NEO Keys](https://www.neokeys.net/) + +Make example for this keyboard (after setting up your build environment): + + make neokeys/g67/element_hs:default + +Flashing example for this keyboard: + + make neokeys/g67/element_hs:default:flash + +To reset the board into bootloader mode, hold the key at the top left of the keyboard while connecting the USB cable (also erases persistent settings). + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/neokeys/g67/element_hs/rules.mk b/keyboards/neokeys/g67/element_hs/rules.mk new file mode 100644 index 0000000000..bf105353e1 --- /dev/null +++ b/keyboards/neokeys/g67/element_hs/rules.mk @@ -0,0 +1,25 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output + +KEY_LOCK_ENABLE = yes # Enable KC_LOCK support + +LAYOUTS = 65_ansi_blocker From 474921d23187499751f14aee444cd78ae6b05a5a Mon Sep 17 00:00:00 2001 From: Barry Huang Date: Wed, 10 Nov 2021 23:03:58 +0800 Subject: [PATCH 457/595] [Keyboard] PK64RGB Keyboard Addition (#14627) --- keyboards/playkbtw/pk64rgb/config.h | 99 +++++++++++++++ keyboards/playkbtw/pk64rgb/info.json | 83 +++++++++++++ .../playkbtw/pk64rgb/keymaps/default/keymap.c | 44 +++++++ .../pk64rgb/keymaps/default/readme.md | 3 + .../playkbtw/pk64rgb/keymaps/via/keymap.c | 55 ++++++++ .../playkbtw/pk64rgb/keymaps/via/rules.mk | 2 + keyboards/playkbtw/pk64rgb/pk64rgb.c | 117 ++++++++++++++++++ keyboards/playkbtw/pk64rgb/pk64rgb.h | 33 +++++ keyboards/playkbtw/pk64rgb/readme.md | 25 ++++ keyboards/playkbtw/pk64rgb/rules.mk | 28 +++++ 10 files changed, 489 insertions(+) create mode 100644 keyboards/playkbtw/pk64rgb/config.h create mode 100644 keyboards/playkbtw/pk64rgb/info.json create mode 100644 keyboards/playkbtw/pk64rgb/keymaps/default/keymap.c create mode 100644 keyboards/playkbtw/pk64rgb/keymaps/default/readme.md create mode 100644 keyboards/playkbtw/pk64rgb/keymaps/via/keymap.c create mode 100644 keyboards/playkbtw/pk64rgb/keymaps/via/rules.mk create mode 100644 keyboards/playkbtw/pk64rgb/pk64rgb.c create mode 100644 keyboards/playkbtw/pk64rgb/pk64rgb.h create mode 100644 keyboards/playkbtw/pk64rgb/readme.md create mode 100644 keyboards/playkbtw/pk64rgb/rules.mk diff --git a/keyboards/playkbtw/pk64rgb/config.h b/keyboards/playkbtw/pk64rgb/config.h new file mode 100644 index 0000000000..302929ae97 --- /dev/null +++ b/keyboards/playkbtw/pk64rgb/config.h @@ -0,0 +1,99 @@ +/* Copyright 2021 Play Keyboard + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x706B // Play Keyboard +#define PRODUCT_ID 0x3634 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Play Keyboard +#define PRODUCT Play Keyboard 64 RGB + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { D7, D6, D5, D3, D2 } +#define MATRIX_COL_PINS { B5, B6, C6, C7, F7, F6, F5, F4, F1, F0, B1, B2, B3, B7 } + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +#ifdef RGB_MATRIX_ENABLE + #define RGB_MATRIX_KEYPRESSES + #define RGB_MATRIX_FRAMEBUFFER_EFFECTS + #define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS + #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 160 + #define RGB_MATRIX_LED_PROCESS_LIMIT 20 + #define RGB_MATRIX_LED_FLUSH_LIMIT 26 + #define DRIVER_ADDR_1 0b1010000 + #define DRIVER_COUNT 1 + #define DRIVER_LED_TOTAL 64 + + +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define DISABLE_RGB_MATRIX_BAND_SAT +#define DISABLE_RGB_MATRIX_BAND_VAL +#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#endif + +#define RGB_DI_PIN B0 +#ifdef RGB_DI_PIN +# define RGBLIGHT_EFFECT_BREATHING +# define RGBLIGHT_EFFECT_RAINBOW_MOOD +# define RGBLIGHT_EFFECT_RAINBOW_SWIRL +# define RGBLIGHT_EFFECT_SNAKE +# define RGBLIGHT_EFFECT_KNIGHT +# define RGBLIGHT_EFFECT_CHRISTMAS +# define RGBLIGHT_EFFECT_STATIC_GRADIENT +# define RGBLIGHT_EFFECT_ALTERNATING +# define RGBLIGHT_EFFECT_TWINKLE +# define RGBLED_NUM 18 +# define RGBLIGHT_HUE_STEP 5 +# define RGBLIGHT_SAT_STEP 5 +# define RGBLIGHT_VAL_STEP 5 +# define RGBLIGHT_SLEEP +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* VIA related config */ +#define VIA_EEPROM_LAYOUT_OPTIONS_SIZE 2 diff --git a/keyboards/playkbtw/pk64rgb/info.json b/keyboards/playkbtw/pk64rgb/info.json new file mode 100644 index 0000000000..736560e063 --- /dev/null +++ b/keyboards/playkbtw/pk64rgb/info.json @@ -0,0 +1,83 @@ +{ + "keyboard_name": "PK64RGB", + "url": "", + "maintainer": "yj7272098", + "layouts": { + "LAYOUT_64_ansi": + [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0, "w":2}, + + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + + {"x":0, "y":3, "w":2}, + {"x":2, "y":3}, + {"x":3, "y":3}, + {"x":4, "y":3}, + {"x":5, "y":3}, + {"x":6, "y":3}, + {"x":7, "y":3}, + {"x":8, "y":3}, + {"x":9, "y":3}, + {"x":10, "y":3}, + {"x":11, "y":3}, + {"x":12, "y":3}, + {"x":13, "y":3}, + {"x":14, "y":3}, + + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":6.25}, + {"x":10, "y":4}, + {"x":11, "y":4}, + {"x":12, "y":4}, + {"x":13, "y":4}, + {"x":14, "y":4}, + +] +} +} \ No newline at end of file diff --git a/keyboards/playkbtw/pk64rgb/keymaps/default/keymap.c b/keyboards/playkbtw/pk64rgb/keymaps/default/keymap.c new file mode 100644 index 0000000000..9cfbc3c287 --- /dev/null +++ b/keyboards/playkbtw/pk64rgb/keymaps/default/keymap.c @@ -0,0 +1,44 @@ +/* Copyright 2021 Play Keyboard + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_64_ansi( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_DEL, + KC_LCTL, KC_LALT, KC_LWIN, KC_SPC, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_64_ansi( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9 , KC_F10, KC_F11, KC_F12, _______, + _______, _______,_______,_______, _______,_______, _______, _______,_______,_______, _______,_______,_______, _______, + RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_SPI, RGB_SPD, _______, _______,_______, _______, + _______, RGB_M_P, RGB_M_B, RGB_M_R, RGB_M_SW, RGB_M_SN, RGB_M_K, RGB_M_X, RGB_M_G, RGB_M_T, _______,_______,_______,_______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; + +void rgb_matrix_indicators_user(void) { + if (layer_state_is(1)) { + rgb_matrix_set_color(77,0xFF, 0x80, 0x00); + } + if (host_keyboard_led_state().caps_lock) { + rgb_matrix_set_color(28, 0xFF, 0xFF, 0xFF); + } +} \ No newline at end of file diff --git a/keyboards/playkbtw/pk64rgb/keymaps/default/readme.md b/keyboards/playkbtw/pk64rgb/keymaps/default/readme.md new file mode 100644 index 0000000000..9875a6a41f --- /dev/null +++ b/keyboards/playkbtw/pk64rgb/keymaps/default/readme.md @@ -0,0 +1,3 @@ +# Default PK64RGB Layout + +This is the default 64_ansi layout that comes flashed on every PK64RGB. \ No newline at end of file diff --git a/keyboards/playkbtw/pk64rgb/keymaps/via/keymap.c b/keyboards/playkbtw/pk64rgb/keymaps/via/keymap.c new file mode 100644 index 0000000000..3d18f60ddb --- /dev/null +++ b/keyboards/playkbtw/pk64rgb/keymaps/via/keymap.c @@ -0,0 +1,55 @@ +/* Copyright 2021 Play Keyboard + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] =LAYOUT_64_ansi( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_DEL, + KC_LCTL, KC_LALT, KC_LWIN, KC_SPC, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] =LAYOUT_64_ansi( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, RGB_SAI, RGB_SAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RESET, + KC_TRNS, KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_TOGG, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,RGB_VAI, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, KC_TRNS, RGB_MOD, RGB_HUI, RGB_VAD, RGB_HUD), + [2] = LAYOUT_64_ansi( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_TOGG, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + [3] = LAYOUT_64_ansi( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, BL_DEC, BL_TOGG, BL_INC, BL_STEP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), +}; + +void rgb_matrix_indicators_user(void) { + if (layer_state_is(1)) { + rgb_matrix_set_color(77,0xFF, 0x80, 0x00); + } + if (host_keyboard_led_state().caps_lock) { + rgb_matrix_set_color(28, 0xFF, 0xFF, 0xFF); + } +} \ No newline at end of file diff --git a/keyboards/playkbtw/pk64rgb/keymaps/via/rules.mk b/keyboards/playkbtw/pk64rgb/keymaps/via/rules.mk new file mode 100644 index 0000000000..7f1f849dce --- /dev/null +++ b/keyboards/playkbtw/pk64rgb/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +LTO_ENABLE = yes +VIA_ENABLE = yes \ No newline at end of file diff --git a/keyboards/playkbtw/pk64rgb/pk64rgb.c b/keyboards/playkbtw/pk64rgb/pk64rgb.c new file mode 100644 index 0000000000..244a479672 --- /dev/null +++ b/keyboards/playkbtw/pk64rgb/pk64rgb.c @@ -0,0 +1,117 @@ +/* Copyright 2021 Play Keyboard + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "pk64rgb.h" + +#ifdef RGB_MATRIX_ENABLE +const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { + /* Refer to IS31 manual for these locations + * driver + * | R location + * | | G location + * | | | B location + * | | | | */ + + {0, A_1, B_1, C_1}, + {0, D_1, E_1, F_1}, + {0, G_1, H_1, I_1}, + {0, J_1, K_1, L_1}, + {0, A_6, B_6, C_6}, + {0, D_6, E_6, F_6}, + {0, G_6, H_6, I_6}, + {0, J_6, K_6, L_6}, + {0, A_11, B_11, C_11}, + {0, D_11, E_11, F_11}, + {0, G_11, H_11, I_11}, + {0, J_11, K_11, L_11}, + {0, A_16, B_16, C_16}, + {0, D_16, E_16, F_16}, + + {0, A_2, B_2, C_2}, + {0, D_2, E_2, F_2}, + {0, G_2, H_2, I_2}, + {0, J_2, K_2, L_2}, + {0, A_7, B_7, C_7}, + {0, D_7, E_7, F_7}, + {0, G_7, H_7, I_7}, + {0, J_7, K_7, L_7}, + {0, A_12, B_12, C_12}, + {0, D_12, E_12, F_12}, + {0, G_12, H_12, I_12}, + {0, J_12, K_12, L_12}, + {0, G_16, H_16, I_16}, + {0, J_16, K_16, L_16}, + + {0, A_3, B_3, C_3}, + {0, D_3, E_3, F_3}, + {0, G_3, H_3, I_3}, + {0, J_3, K_3, L_3}, + {0, A_8, B_8, C_8}, + {0, D_8, E_8, F_8}, + {0, G_8, H_8, I_8}, + {0, J_8, K_8, L_8}, + {0, A_13, B_13, C_13}, + {0, D_13, E_13, F_13}, + {0, G_13, H_13, I_13}, + {0, J_13, K_13, L_13}, + {0, A_15, B_15, C_15}, + + {0, A_4, B_4, C_4}, + {0, D_4, E_4, F_4}, + {0, G_4, H_4, I_4}, + {0, J_4, K_4, L_4}, + {0, A_9, B_9, C_9}, + {0, D_9, E_9, F_9}, + {0, G_9, H_9, I_9}, + {0, J_9, K_9, L_9}, + {0, A_14, B_14, C_14}, + {0, D_14, E_14, F_14}, + {0, G_14, H_14, I_14}, + {0, J_14, K_14, L_14}, + {0, D_15, E_15, F_15}, + {0, G_15, H_15, I_15}, + + {0, A_5, B_5, C_5}, + {0, D_5, E_5, F_5}, + {0, G_5, H_5, I_5}, + {0, J_5, K_5, L_5}, + {0, A_10, B_10, C_10}, + {0, D_10, E_10, F_10}, + {0, G_10, H_10, I_10}, + {0, J_10, K_10, L_10}, + {0, J_15, K_15, L_15} +}; + +led_config_t g_led_config = {{ + { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 }, + { 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27 }, + { 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40}, + { 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54 }, + { 55, 56, 57, 58, 59, 60, 61, 62, 63} +}, { + { 0, 0 }, { 16, 0 }, { 32, 0 }, { 48, 0 }, { 64, 0 }, { 80, 0 }, { 96, 0 }, { 112, 0 }, { 128, 0 }, { 144, 0 }, { 160, 0 }, { 176, 0 }, { 192, 0 }, { 216, 0 }, + { 4, 16 }, { 18, 16 }, { 34, 16 }, { 50, 16 }, { 66, 16 }, { 82, 16 }, { 98, 16 }, { 114, 16 }, { 130, 16 }, { 146, 16 }, { 162, 16 }, { 178, 16 }, { 194, 16 }, { 220, 16 }, + { 6, 32 }, { 20, 32 }, { 36, 32 }, { 52, 32 }, { 68, 32 }, { 84, 32 }, { 100, 32 }, { 116, 32 }, { 132, 32 }, { 148, 32 }, { 164, 32 }, { 180, 32 }, { 212, 32 }, + { 9, 48 }, { 27, 48 }, { 43, 48 }, { 59, 48 }, { 75, 48 }, { 91, 48 }, { 107, 48 }, { 123, 48 }, { 139, 48 }, { 155, 48 }, { 171, 48 }, { 187, 48 }, { 203, 48 }, { 219, 48 }, + { 2, 64 }, { 16, 64 }, { 32, 64 }, { 64, 64 }, { 114, 64 }, { 130, 64 }, { 146, 64 }, { 204, 64 }, { 224, 64 } +}, { + 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, + 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, + 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, + 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1, + 1, 1, 1, 4, 1, 1, 4, 4, 4, +}}; +#endif \ No newline at end of file diff --git a/keyboards/playkbtw/pk64rgb/pk64rgb.h b/keyboards/playkbtw/pk64rgb/pk64rgb.h new file mode 100644 index 0000000000..be0ee0a011 --- /dev/null +++ b/keyboards/playkbtw/pk64rgb/pk64rgb.h @@ -0,0 +1,33 @@ +/* Copyright 2021 Play Keyboard + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +#define LAYOUT_64_ansi( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, \ + K40, K41, K42, K45, K48, K4A, K4B, K4C, K4D \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, KC_NO }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D }, \ + { K40, K41, K42, KC_NO, KC_NO, K45, KC_NO, KC_NO, KC_NO, K48, K4A, K4B, K4C, K4D } \ +} diff --git a/keyboards/playkbtw/pk64rgb/readme.md b/keyboards/playkbtw/pk64rgb/readme.md new file mode 100644 index 0000000000..29871af7a6 --- /dev/null +++ b/keyboards/playkbtw/pk64rgb/readme.md @@ -0,0 +1,25 @@ +# Play Keyboard 64RGB + +![PK64RGB](https://cdn.store-assets.com/s/409567/i/25281841.png) + +A 60% RGB hotswap keyboard PCB made by Play Keyboard. + +* Keyboard Maintainer: [Barry Huang](https://github.com/yj7272098) +* Hardware Supported: Play Keyboard 64 RGB +* Hardware Availability: [Play Keyboard](http://play-keyboard.store/) + +Make example for this keyboard (after setting up your build environment): + + make playkbtw/pk64rgb:default + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available + +You can get into bootloader by pressing the reset button from the back of PCB. + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). \ No newline at end of file diff --git a/keyboards/playkbtw/pk64rgb/rules.mk b/keyboards/playkbtw/pk64rgb/rules.mk new file mode 100644 index 0000000000..b7e077924b --- /dev/null +++ b/keyboards/playkbtw/pk64rgb/rules.mk @@ -0,0 +1,28 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +RGB_MATRIX_ENABLE = yes # Use RGB matrix +RGB_MATRIX_DRIVER = IS31FL3733 + +AUDIO_ENABLE = no # Audio output + +LAYOUTS = 64_ansi + +LTO_ENABLE = yes \ No newline at end of file From 3de700847e21ade4eead405e968f5ef30fcb8aac Mon Sep 17 00:00:00 2001 From: Luigi311 Date: Wed, 10 Nov 2021 09:27:55 -0700 Subject: [PATCH 458/595] [Keyboard] Stream cheap via fixes/updates (#14325) --- keyboards/handwired/stream_cheap/2x3/config.h | 10 +++++----- .../stream_cheap/2x4/keymaps/via/keymap.c | 19 ++++++++++++++++++- keyboards/handwired/stream_cheap/2x5/config.h | 12 ++++++------ 3 files changed, 29 insertions(+), 12 deletions(-) diff --git a/keyboards/handwired/stream_cheap/2x3/config.h b/keyboards/handwired/stream_cheap/2x3/config.h index a142ec4a4e..5e571e356a 100644 --- a/keyboards/handwired/stream_cheap/2x3/config.h +++ b/keyboards/handwired/stream_cheap/2x3/config.h @@ -3,11 +3,11 @@ #include "config_common.h" /* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x1213 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Kyle Hart -#define PRODUCT Stream Cheap 2x3 +#define VENDOR_ID 0x7363 // Stream Cheap +#define PRODUCT_ID 0x1213 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Stream Cheap +#define PRODUCT 2x3 /* key matrix size */ #define MATRIX_ROWS 2 diff --git a/keyboards/handwired/stream_cheap/2x4/keymaps/via/keymap.c b/keyboards/handwired/stream_cheap/2x4/keymaps/via/keymap.c index 8824e21458..4d392ae982 100644 --- a/keyboards/handwired/stream_cheap/2x4/keymaps/via/keymap.c +++ b/keyboards/handwired/stream_cheap/2x4/keymaps/via/keymap.c @@ -18,4 +18,21 @@ enum layers { NORMAL_LAYER, SECOND_LAYER, THIRD_LAYER, FOURTH_LAYER }; -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {[NORMAL_LAYER] = LAYOUT_ortho_2x4(KC_A, KC_A, KC_A, TO(3), KC_A, KC_A, KC_A, TO(1)), [SECOND_LAYER] = LAYOUT_ortho_2x4(KC_B, KC_B, KC_B, TO(0), KC_B, KC_B, KC_B, TO(2)), [THIRD_LAYER] = LAYOUT_ortho_2x4(KC_C, KC_C, KC_C, TO(1), KC_C, KC_C, KC_C, TO(3)), [FOURTH_LAYER] = LAYOUT_ortho_2x4(KC_D, KC_D, KC_D, TO(2), KC_D, KC_D, KC_D, TO(0))}; +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [NORMAL_LAYER] = LAYOUT_ortho_2x4( + KC_F13, KC_F14, KC_F15, KC_F16, + KC_F17, KC_F18, KC_F19, KC_F20 + ), + [SECOND_LAYER] = LAYOUT_ortho_2x4( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [THIRD_LAYER] = LAYOUT_ortho_2x4( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [FOURTH_LAYER] = LAYOUT_ortho_2x4( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/handwired/stream_cheap/2x5/config.h b/keyboards/handwired/stream_cheap/2x5/config.h index cd69c632f1..e7a73107b9 100644 --- a/keyboards/handwired/stream_cheap/2x5/config.h +++ b/keyboards/handwired/stream_cheap/2x5/config.h @@ -3,11 +3,11 @@ #include "config_common.h" /* USB Device descriptor parameter */ -#define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x1215 -#define DEVICE_VER 0x0001 -#define MANUFACTURER Kyle Hart -#define PRODUCT Stream Cheap 2x5 +#define VENDOR_ID 0x7363 // Stream Cheap +#define PRODUCT_ID 0x1215 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Stream Cheap +#define PRODUCT 2x5 /* key matrix size */ #define MATRIX_ROWS 2 @@ -15,7 +15,7 @@ /* define direct pins used */ #define DIRECT_PINS { { D1,C6,B4,B5,B2}, { D0,D4,D7,E6,B6} } -//#define DIRECT_PINS { { D1, C6, B4, B6, D0}, { D7, D4, B2, B5, E6} } + /* Set 0 if debouncing isn't needed */ #define DEBOUNCE 5 From d3fe3cf3e84932ebaced856819446b1766ca7169 Mon Sep 17 00:00:00 2001 From: melonbred <61572569+melonbred@users.noreply.github.com> Date: Wed, 10 Nov 2021 08:31:41 -0800 Subject: [PATCH 459/595] [Keyboard] Update mb44.h (#15092) --- keyboards/mb44/mb44.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/keyboards/mb44/mb44.h b/keyboards/mb44/mb44.h index a0664d8b87..e3c490e87c 100644 --- a/keyboards/mb44/mb44.h +++ b/keyboards/mb44/mb44.h @@ -48,13 +48,13 @@ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \ - K30, K31, K32, K33, K36, K37, K39, K3A, K3B \ + K30, K31, K32, K33, K35, K36, K39, K3A, K3B \ ) \ { \ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B }, \ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B }, \ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B }, \ - { K30, K31, K32, K33, XXX, XXX, K36, K37, XXX, K39, K3A, K3B } \ + { K30, K31, K32, K33, XXX, K35, K36, XXX, XXX, K39, K3A, K3B } \ } #define LAYOUT_2u1u_space( \ From 67387cf2774411561714f247c575c5c5756bfdee Mon Sep 17 00:00:00 2001 From: Albert Y <76888457+filterpaper@users.noreply.github.com> Date: Thu, 11 Nov 2021 00:33:11 +0800 Subject: [PATCH 460/595] [Keyboard] Add Paroxysm keyboard to Cradio (#15097) Co-authored-by: filterpaper --- keyboards/cradio/info.json | 20 ++++++++++---------- keyboards/cradio/readme.md | 1 + 2 files changed, 11 insertions(+), 10 deletions(-) diff --git a/keyboards/cradio/info.json b/keyboards/cradio/info.json index 77b611f325..7a46c69113 100644 --- a/keyboards/cradio/info.json +++ b/keyboards/cradio/info.json @@ -5,7 +5,7 @@ "layouts": { "LAYOUT": { "layout": [ - {"x": 0, "y": 0.93}, + {"x": 0, "y": 0.95}, {"x": 1, "y": 0.31}, {"x": 2, "y": 0}, {"x": 3, "y": 0.28}, @@ -15,9 +15,9 @@ {"x": 8, "y": 0.28}, {"x": 9, "y": 0}, {"x": 10, "y": 0.31}, - {"x": 11, "y": 0.93}, + {"x": 11, "y": 0.95}, - {"x": 0, "y": 1.93}, + {"x": 0, "y": 1.95}, {"x": 1, "y": 1.31}, {"x": 2, "y": 1}, {"x": 3, "y": 1.28}, @@ -27,9 +27,9 @@ {"x": 8, "y": 1.28}, {"x": 9, "y": 1}, {"x": 10, "y": 1.31}, - {"x": 11, "y": 1.93}, + {"x": 11, "y": 1.95}, - {"x": 0, "y": 2.93}, + {"x": 0, "y": 2.95}, {"x": 1, "y": 2.31}, {"x": 2, "y": 2}, {"x": 3, "y": 2.28}, @@ -39,13 +39,13 @@ {"x": 8, "y": 2.28}, {"x": 9, "y": 2}, {"x": 10, "y": 2.31}, - {"x": 11, "y": 2.93}, + {"x": 11, "y": 2.95}, - {"x": 3.5, "y": 3.75}, - {"x": 4.5, "y": 4}, + {"x": 4, "y": 3.6}, + {"x": 5, "y": 3.4}, - {"x": 6.5, "y": 4}, - {"x": 7.5, "y": 3.75} + {"x": 6, "y": 3.4}, + {"x": 7, "y": 3.6} ] } } diff --git a/keyboards/cradio/readme.md b/keyboards/cradio/readme.md index 73d825aa5d..99cd20fb9c 100644 --- a/keyboards/cradio/readme.md +++ b/keyboards/cradio/readme.md @@ -10,6 +10,7 @@ Cradio are low-profile 34-key split-keyboards designed by [@davidphilipbarr](htt * Hardware Supported: * [Sweep](https://github.com/davidphilipbarr/Sweep) (all versions) * [Hypergarlic](https://github.com/davidphilipbarr/hypergolic/tree/main/hypergarlic) + * [Paroxysm](https://github.com/davidphilipbarr/hypergolic/tree/main/paroxysm) * Variants of the same 34-key direct pin PCB * Hardware Availability: order PCBs with gerber files from the repository From 1989eb17ec391d4f9e8c1c1ea3fc746f96d43942 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Wed, 10 Nov 2021 09:48:59 -0800 Subject: [PATCH 461/595] [Keyboard] Fix compilation issues for teleport numpad (#15110) --- .../teleport/numpad/keymaps/default/keymap.c | 15 +++++----- .../teleport/numpad/keymaps/via/keymap.c | 30 ++++++++++++++----- 2 files changed, 31 insertions(+), 14 deletions(-) diff --git a/keyboards/teleport/numpad/keymaps/default/keymap.c b/keyboards/teleport/numpad/keymaps/default/keymap.c index 64f805f5da..539a046ee8 100644 --- a/keyboards/teleport/numpad/keymaps/default/keymap.c +++ b/keyboards/teleport/numpad/keymaps/default/keymap.c @@ -19,16 +19,17 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_numpad_5x4( LT(1, KC_NLCK), KC_PSLS, KC_PAST, KC_PMNS, - KC_P7, KC_P8, KC_P9, - KC_P4, KC_P5, KC_P6, KC_PPLS, - KC_P1, KC_P2, KC_P3, - KC_P0, KC_PDOT, KC_PENT + KC_P7, KC_P8, KC_P9, + KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_P1, KC_P2, KC_P3, + KC_P0, KC_PDOT, KC_PENT ), [1] = LAYOUT_numpad_5x4( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, RESET + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, RESET ), +}; diff --git a/keyboards/teleport/numpad/keymaps/via/keymap.c b/keyboards/teleport/numpad/keymaps/via/keymap.c index 28271c9d58..8eea06c76e 100644 --- a/keyboards/teleport/numpad/keymaps/via/keymap.c +++ b/keyboards/teleport/numpad/keymaps/via/keymap.c @@ -19,17 +19,33 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_numpad_5x4( LT(1, KC_NLCK), KC_PSLS, KC_PAST, KC_PMNS, - KC_P7, KC_P8, KC_P9, - KC_P4, KC_P5, KC_P6, KC_PPLS, - KC_P1, KC_P2, KC_P3, - KC_P0, KC_PDOT, KC_PENT + KC_P7, KC_P8, KC_P9, + KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_P1, KC_P2, KC_P3, + KC_P0, KC_PDOT, KC_PENT ), [1] = LAYOUT_numpad_5x4( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS - KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, RESET + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, RESET + ), + + [2] = LAYOUT_numpad_5x4( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, RESET + ), + + [3] = LAYOUT_numpad_5x4( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, RESET ), }; From a4eb73eef03ef33bab85703f04c71985d43785e8 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?S=E1=BA=AFn?= <59417802+MaiTheSan@users.noreply.github.com> Date: Thu, 11 Nov 2021 11:30:27 +0700 Subject: [PATCH 462/595] [Keyboard] Added Krush Solder (60% & 65%) (#15074) --- .../sawnsprojects/krush/krush60/readme.md | 25 + .../krush/krush60/solder/config.h | 60 + .../krush/krush60/solder/info.json | 1274 +++++++++++++++++ .../krush60/solder/keymaps/60_all/keymap.c | 35 + .../krush60/solder/keymaps/60_all/readme.md | 1 + .../solder/keymaps/60_ansi_7u/keymap.c | 37 + .../solder/keymaps/60_ansi_7u/readme.md | 1 + .../solder/keymaps/60_ansi_arrow/keymap.c | 35 + .../solder/keymaps/60_ansi_arrow/readme.md | 1 + .../solder/keymaps/60_ansi_arrow_7u/keymap.c | 35 + .../solder/keymaps/60_ansi_arrow_7u/readme.md | 1 + .../keymaps/60_ansi_arrow_splt_bs/keymap.c | 35 + .../keymaps/60_ansi_arrow_splt_bs/readme.md | 1 + .../keymaps/60_ansi_arrow_splt_bs_7u/keymap.c | 35 + .../60_ansi_arrow_splt_bs_7u/readme.md | 1 + .../60_ansi_arrow_splt_bs_spc/keymap.c | 35 + .../60_ansi_arrow_splt_bs_spc/readme.md | 1 + .../keymaps/60_ansi_arrow_splt_spc/keymap.c | 37 + .../keymaps/60_ansi_arrow_splt_spc/readme.md | 1 + .../solder/keymaps/60_ansi_splt_bs/keymap.c | 35 + .../solder/keymaps/60_ansi_splt_bs/readme.md | 1 + .../keymaps/60_ansi_splt_bs_7u/keymap.c | 35 + .../keymaps/60_ansi_splt_bs_7u/readme.md | 1 + .../keymaps/60_ansi_splt_bs_spc/keymap.c | 35 + .../keymaps/60_ansi_splt_bs_spc/readme.md | 1 + .../solder/keymaps/60_ansi_splt_spc/keymap.c | 35 + .../solder/keymaps/60_ansi_splt_spc/readme.md | 1 + .../solder/keymaps/60_tsangan/keymap.c | 36 + .../solder/keymaps/60_tsangan/readme.md | 1 + .../keymaps/60_tsangan_splt_bs/keymap.c | 35 + .../keymaps/60_tsangan_splt_bs/readme.md | 1 + .../krush60/solder/keymaps/default/keymap.c | 40 + .../krush60/solder/keymaps/default/readme.md | 1 + .../krush/krush60/solder/keymaps/via/keymap.c | 49 + .../krush60/solder/keymaps/via/readme.md | 1 + .../krush/krush60/solder/keymaps/via/rules.mk | 1 + .../krush/krush60/solder/readme.md | 15 + .../krush/krush60/solder/rules.mk | 22 + .../krush/krush60/solder/solder.c | 17 + .../krush/krush60/solder/solder.h | 335 +++++ .../sawnsprojects/krush/krush65/readme.md | 25 + .../krush/krush65/solder/config.h | 68 + .../krush/krush65/solder/encoder_actions.c | 58 + .../krush/krush65/solder/encoder_actions.h | 21 + .../krush/krush65/solder/info.json | 299 ++++ .../solder/keymaps/ansi_blocker/keymap.c | 39 + .../solder/keymaps/ansi_blocker/readme.md | 1 + .../keymaps/ansi_blocker_split_all/keymap.c | 38 + .../keymaps/ansi_blocker_split_all/readme.md | 1 + .../keymaps/ansi_blocker_split_bs/keymap.c | 39 + .../keymaps/ansi_blocker_split_bs/readme.md | 1 + .../krush65/solder/keymaps/default/keymap.c | 39 + .../krush65/solder/keymaps/default/readme.md | 1 + .../krush65/solder/keymaps/sawns/keymap.c | 75 + .../krush65/solder/keymaps/sawns/readme.md | 1 + .../krush65/solder/keymaps/sawns/rules.mk | 1 + .../krush/krush65/solder/keymaps/via/keymap.c | 51 + .../krush65/solder/keymaps/via/readme.md | 1 + .../krush/krush65/solder/keymaps/via/rules.mk | 1 + .../krush/krush65/solder/readme.md | 15 + .../krush/krush65/solder/rules.mk | 23 + .../krush/krush65/solder/solder.c | 53 + .../krush/krush65/solder/solder.h | 93 ++ 63 files changed, 3293 insertions(+) create mode 100644 keyboards/sawnsprojects/krush/krush60/readme.md create mode 100644 keyboards/sawnsprojects/krush/krush60/solder/config.h create mode 100644 keyboards/sawnsprojects/krush/krush60/solder/info.json create mode 100644 keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_all/keymap.c create mode 100644 keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_all/readme.md create mode 100644 keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_7u/keymap.c create mode 100644 keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_7u/readme.md create mode 100644 keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow/keymap.c create mode 100644 keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow/readme.md create mode 100644 keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_7u/keymap.c create mode 100644 keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_7u/readme.md create mode 100644 keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_bs/keymap.c create mode 100644 keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_bs/readme.md create mode 100644 keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_bs_7u/keymap.c create mode 100644 keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_bs_7u/readme.md create mode 100644 keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_bs_spc/keymap.c create mode 100644 keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_bs_spc/readme.md create mode 100644 keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_spc/keymap.c create mode 100644 keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_spc/readme.md create mode 100644 keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_bs/keymap.c create mode 100644 keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_bs/readme.md create mode 100644 keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_bs_7u/keymap.c create mode 100644 keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_bs_7u/readme.md create mode 100644 keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_bs_spc/keymap.c create mode 100644 keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_bs_spc/readme.md create mode 100644 keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_spc/keymap.c create mode 100644 keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_spc/readme.md create mode 100644 keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_tsangan/keymap.c create mode 100644 keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_tsangan/readme.md create mode 100644 keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_tsangan_splt_bs/keymap.c create mode 100644 keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_tsangan_splt_bs/readme.md create mode 100644 keyboards/sawnsprojects/krush/krush60/solder/keymaps/default/keymap.c create mode 100644 keyboards/sawnsprojects/krush/krush60/solder/keymaps/default/readme.md create mode 100644 keyboards/sawnsprojects/krush/krush60/solder/keymaps/via/keymap.c create mode 100644 keyboards/sawnsprojects/krush/krush60/solder/keymaps/via/readme.md create mode 100644 keyboards/sawnsprojects/krush/krush60/solder/keymaps/via/rules.mk create mode 100644 keyboards/sawnsprojects/krush/krush60/solder/readme.md create mode 100644 keyboards/sawnsprojects/krush/krush60/solder/rules.mk create mode 100644 keyboards/sawnsprojects/krush/krush60/solder/solder.c create mode 100644 keyboards/sawnsprojects/krush/krush60/solder/solder.h create mode 100644 keyboards/sawnsprojects/krush/krush65/readme.md create mode 100644 keyboards/sawnsprojects/krush/krush65/solder/config.h create mode 100644 keyboards/sawnsprojects/krush/krush65/solder/encoder_actions.c create mode 100644 keyboards/sawnsprojects/krush/krush65/solder/encoder_actions.h create mode 100644 keyboards/sawnsprojects/krush/krush65/solder/info.json create mode 100644 keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker/keymap.c create mode 100644 keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker/readme.md create mode 100644 keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_all/keymap.c create mode 100644 keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_all/readme.md create mode 100644 keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_bs/keymap.c create mode 100644 keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_bs/readme.md create mode 100644 keyboards/sawnsprojects/krush/krush65/solder/keymaps/default/keymap.c create mode 100644 keyboards/sawnsprojects/krush/krush65/solder/keymaps/default/readme.md create mode 100644 keyboards/sawnsprojects/krush/krush65/solder/keymaps/sawns/keymap.c create mode 100644 keyboards/sawnsprojects/krush/krush65/solder/keymaps/sawns/readme.md create mode 100644 keyboards/sawnsprojects/krush/krush65/solder/keymaps/sawns/rules.mk create mode 100644 keyboards/sawnsprojects/krush/krush65/solder/keymaps/via/keymap.c create mode 100644 keyboards/sawnsprojects/krush/krush65/solder/keymaps/via/readme.md create mode 100644 keyboards/sawnsprojects/krush/krush65/solder/keymaps/via/rules.mk create mode 100644 keyboards/sawnsprojects/krush/krush65/solder/readme.md create mode 100644 keyboards/sawnsprojects/krush/krush65/solder/rules.mk create mode 100644 keyboards/sawnsprojects/krush/krush65/solder/solder.c create mode 100644 keyboards/sawnsprojects/krush/krush65/solder/solder.h diff --git a/keyboards/sawnsprojects/krush/krush60/readme.md b/keyboards/sawnsprojects/krush/krush60/readme.md new file mode 100644 index 0000000000..515040f904 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/readme.md @@ -0,0 +1,25 @@ +# Krush60 + +A 60% keyboard sold in several variants. + +1. [Solder](solder/): 06/2021. Atmega32u4 soldered keyboard. Sold under the name "Krush60" with krush keyboard case. Compatible with some 60% case, Singa, Bakeneko. + + **Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the `.hex` or `.bin` appropriate for your board. + +* Keyboard Maintainer: [SawnsProjects](https://github.com/MaiTheSan) +* Hardware Supported: Krush60, SINGA, Bakeneko, 60% traymount case +* Hardware Availability: [Mechkey.store](https://mechkey.store/) + +Make examples for this keyboard (after setting up your build environment): + + make sawnsprojects/krush/krush60/solder:default + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). \ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/config.h b/keyboards/sawnsprojects/krush/krush60/solder/config.h new file mode 100644 index 0000000000..b15361ed14 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/config.h @@ -0,0 +1,60 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x5350 +#define PRODUCT_ID 0x6B32 +#define DEVICE_VER 0x0001 +#define MANUFACTURER SawnsProjects +#define PRODUCT Krush60 - Solder + +/* key matrix size */ +#define MATRIX_ROWS 10 +#define MATRIX_COLS 8 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { B1, B2, D1, D2, D4, D6, F6, F7, F5, F4 } +#define MATRIX_COL_PINS { C7, C6, B6, B5, B4, D7, D5, D3 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW +/* Caps Lock */ +#define LED_CAPS_LOCK_PIN F0 + +#define RGB_DI_PIN F1 +#ifdef RGB_DI_PIN + #define RGBLED_NUM 20 + #define RGBLIGHT_HUE_STEP 8 + #define RGBLIGHT_SAT_STEP 8 + #define RGBLIGHT_VAL_STEP 8 + #define RGBLIGHT_LIMIT_VAL 200 /* The maximum brightness level */ + #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE +#endif \ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/info.json b/keyboards/sawnsprojects/krush/krush60/solder/info.json new file mode 100644 index 0000000000..884b768eb6 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/info.json @@ -0,0 +1,1274 @@ +{ + "keyboard_name": "Krush60 Solder", + "url": "", + "maintainer": "MaiTheSan", + "layouts": { + "LAYOUT_60_ansi": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0, "w":2}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3}, + {"x":12.25, "y":3, "w":2.75}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":6.25}, + {"x":10, "y":4, "w":1.25}, + {"x":11.25, "y":4, "w":1.25}, + {"x":12.5, "y":4, "w":1.25}, + {"x":13.75, "y":4, "w":1.25} + ] + }, + "LAYOUT_60_ansi_arrow": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0, "w":2}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3, "w":1.75}, + {"x":13, "y":3}, + {"x":14, "y":3}, + + {"x":0, "y": 4, "w": 1.25}, + {"x":1.25, "y": 4, "w": 1.25}, + {"x":2.5, "y": 4, "w": 1.25}, + {"x":3.75, "y": 4, "w": 6.25}, + {"x":10, "y": 4}, + {"x":11, "y": 4}, + {"x":12, "y": 4}, + {"x":13, "y": 4}, + {"x":14, "y": 4} + ] + }, + "LAYOUT_60_ansi_arrow_split_bs_7u_spc": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0}, + {"x":14, "y":0}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3, "w":1.75}, + {"x":13, "y":3}, + {"x":14, "y":3}, + + {"x":0, "y": 4, "w": 1.5}, + {"x":1.5, "y": 4}, + {"x":2.5, "y": 4, "w": 1.5}, + {"x":4, "y": 4, "w": 7}, + {"x":11, "y": 4}, + {"x":12, "y": 4}, + {"x":13, "y": 4}, + {"x":14, "y": 4} + ] + }, + "LAYOUT_60_ansi_split_bs": { + "layout": [ + {"x":0, "y": 0}, + {"x":1, "y": 0}, + {"x":2, "y": 0}, + {"x":3, "y": 0}, + {"x":4, "y": 0}, + {"x":5, "y": 0}, + {"x":6, "y": 0}, + {"x":7, "y": 0}, + {"x":8, "y": 0}, + {"x":9, "y": 0}, + {"x":10, "y": 0}, + {"x":11, "y": 0}, + {"x":12, "y": 0}, + {"x":13, "y": 0}, + {"x":14, "y": 0}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3}, + {"x":12.25, "y":3, "w":2.75}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":6.25}, + {"x":10, "y":4, "w":1.25}, + {"x":11.25, "y":4, "w":1.25}, + {"x":12.5, "y":4, "w":1.25}, + {"x":13.75, "y":4, "w":1.25} + ] + }, + "LAYOUT_60_ansi_split_spc": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0, "w":2}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3}, + {"x":12.25, "y":3, "w":2.75}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":2.25}, + {"x":6, "y":4, "w":1.25}, + {"x":7.25, "y":4, "w":2.75}, + {"x":10, "y":4, "w":1.25}, + {"x":11.25, "y":4, "w":1.25}, + {"x":12.5, "y":4, "w":1.25}, + {"x":13.75, "y":4, "w":1.25} + ] + }, + "LAYOUT_60_ansi_split_bs_spc": { + "layout": [ + {"x":0, "y": 0}, + {"x":1, "y": 0}, + {"x":2, "y": 0}, + {"x":3, "y": 0}, + {"x":4, "y": 0}, + {"x":5, "y": 0}, + {"x":6, "y": 0}, + {"x":7, "y": 0}, + {"x":8, "y": 0}, + {"x":9, "y": 0}, + {"x":10, "y": 0}, + {"x":11, "y": 0}, + {"x":12, "y": 0}, + {"x":13, "y": 0}, + {"x":14, "y": 0}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3}, + {"x":12.25, "y":3, "w":2.75}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":2.25}, + {"x":6, "y":4, "w":1.25}, + {"x":7.25, "y":4, "w":2.75}, + {"x":10, "y":4, "w":1.25}, + {"x":11.25, "y":4, "w":1.25}, + {"x":12.5, "y":4, "w":1.25}, + {"x":13.75, "y":4, "w":1.25} + ] + }, + "LAYOUT_60_ansi_7u_spc": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0, "w":2}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3}, + {"x":12.25, "y":3, "w":2.75}, + + {"x":0, "y": 4, "w": 1.5}, + {"x":1.5, "y": 4}, + {"x":2.5, "y": 4, "w": 1.5}, + {"x":4, "y": 4, "w": 7}, + {"x":11, "y": 4, "w": 1.5}, + {"x":12.5, "y": 4}, + {"x":13.5, "y": 4, "w": 1.5}, + ] + }, + "LAYOUT_60_ansi_split_bs_7u_spc": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0}, + {"x":14, "y":0}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3}, + {"x":12.25, "y":3, "w":2.75}, + + {"x": 0, "y": 4, "w": 1.5}, + {"x": 1.5, "y": 4}, + {"x": 2.5, "y": 4, "w": 1.5}, + {"x": 4, "y": 4, "w": 7}, + {"x": 11, "y": 4, "w": 1.5}, + {"x": 12.5, "y": 4}, + {"x": 13.5, "y": 4, "w": 1.5}, + ] + }, + "LAYOUT_60_ansi_arrow_split_bs": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0}, + {"x":14, "y":0}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3, "w":1.75}, + {"x":13, "y":3}, + {"x":14, "y":3}, + + {"x":0, "y": 4, "w": 1.25}, + {"x":1.25, "y": 4, "w": 1.25}, + {"x":2.5, "y": 4, "w": 1.25}, + {"x":3.75, "y": 4, "w": 6.25}, + {"x":10, "y": 4}, + {"x":11, "y": 4}, + {"x":12, "y": 4}, + {"x":13, "y": 4}, + {"x":14, "y": 4} + ] + }, + "LAYOUT_60_ansi_arrow_split_spc": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0, "w":2}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3, "w":1.75}, + {"x":13, "y":3}, + {"x":14, "y":3}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":2.25}, + {"x":6, "y":4, "w":1.25}, + {"x":7.25, "y":4, "w":2.75}, + {"x":10, "y": 4}, + {"x":11, "y": 4}, + {"x":12, "y": 4}, + {"x":13, "y": 4}, + {"x":14, "y": 4} + ] + }, + "LAYOUT_60_ansi_arrow_split_bs_spc": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0}, + {"x":14, "y":0}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3, "w":1.75}, + {"x":13, "y":3}, + {"x":14, "y":3}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":2.25}, + {"x":6, "y":4, "w":1.25}, + {"x":7.25, "y":4, "w":2.75}, + {"x":10, "y": 4}, + {"x":11, "y": 4}, + {"x":12, "y": 4}, + {"x":13, "y": 4}, + {"x":14, "y": 4} + ] + }, + "LAYOUT_60_ansi_arrow_7u_spc": { + "layout": [ + {"x": 0, "y": 0}, + {"x": 1, "y": 0}, + {"x": 2, "y": 0}, + {"x": 3, "y": 0}, + {"x": 4, "y": 0}, + {"x": 5, "y": 0}, + {"x": 6, "y": 0}, + {"x": 7, "y": 0}, + {"x": 8, "y": 0}, + {"x": 9, "y": 0}, + {"x": 10, "y": 0}, + {"x": 11, "y": 0}, + {"x": 12, "y": 0}, + {"x": 13, "y": 0, "w": 2}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1, "w":1.5}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2, "w":2.25}, + + {"x":0, "y":3, "w":2.25}, + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3, "w":1.75}, + {"x":13, "y":3}, + {"x":14, "y":3}, + + {"x":0, "y": 4, "w": 1.5}, + {"x":1.5, "y": 4}, + {"x":2.5, "y": 4, "w": 1.5}, + {"x":4, "y": 4, "w": 7}, + {"x":11, "y": 4}, + {"x":12, "y": 4}, + {"x":13, "y": 4}, + {"x":14, "y": 4} + ] + }, + "LAYOUT_60_ansi_tsangan": { + "layout": [ + {"x": 0, "y": 0}, + {"x": 1, "y": 0}, + {"x": 2, "y": 0}, + {"x": 3, "y": 0}, + {"x": 4, "y": 0}, + {"x": 5, "y": 0}, + {"x": 6, "y": 0}, + {"x": 7, "y": 0}, + {"x": 8, "y": 0}, + {"x": 9, "y": 0}, + {"x": 10, "y": 0}, + {"x": 11, "y": 0}, + {"x": 12, "y": 0}, + {"x": 13, "y": 0, "w": 2}, + + {"x": 0, "y": 1, "w": 1.5}, + {"x": 1.5, "y": 1}, + {"x": 2.5, "y": 1}, + {"x": 3.5, "y": 1}, + {"x": 4.5, "y": 1}, + {"x": 5.5, "y": 1}, + {"x": 6.5, "y": 1}, + {"x": 7.5, "y": 1}, + {"x": 8.5, "y": 1}, + {"x": 9.5, "y": 1}, + {"x": 10.5, "y": 1}, + {"x": 11.5, "y": 1}, + {"x": 12.5, "y": 1}, + {"x": 13.5, "y": 1, "w": 1.5}, + + {"x": 0, "y": 2, "w": 1.75}, + {"x": 1.75, "y": 2}, + {"x": 2.75, "y": 2}, + {"x": 3.75, "y": 2}, + {"x": 4.75, "y": 2}, + {"x": 5.75, "y": 2}, + {"x": 6.75, "y": 2}, + {"x": 7.75, "y": 2}, + {"x": 8.75, "y": 2}, + {"x": 9.75, "y": 2}, + {"x": 10.75, "y": 2}, + {"x": 11.75, "y": 2}, + {"x": 12.75, "y": 2, "w": 2.25}, + + {"x": 0, "y": 3, "w": 2.25}, + {"x": 2.25, "y": 3}, + {"x": 3.25, "y": 3}, + {"x": 4.25, "y": 3}, + {"x": 5.25, "y": 3}, + {"x": 6.25, "y": 3}, + {"x": 7.25, "y": 3}, + {"x": 8.25, "y": 3}, + {"x": 9.25, "y": 3}, + {"x": 10.25, "y": 3}, + {"x": 11.25, "y": 3}, + {"x": 12.25, "y": 3, "w": 1.75}, + {"x": 14, "y": 3}, + + {"x": 0, "y": 4, "w": 1.5}, + {"x": 1.5, "y": 4}, + {"x": 2.5, "y": 4, "w": 1.5}, + {"x": 4, "y": 4, "w": 7}, + {"x": 11, "y": 4, "w": 1.5}, + {"x": 12.5, "y": 4}, + {"x": 13.5, "y": 4, "w": 1.5}, + ] + }, + "LAYOUT_60_ansi_tsangan_split_bs": { + "layout": [ + {"x": 0, "y": 0}, + {"x": 1, "y": 0}, + {"x": 2, "y": 0}, + {"x": 3, "y": 0}, + {"x": 4, "y": 0}, + {"x": 5, "y": 0}, + {"x": 6, "y": 0}, + {"x": 7, "y": 0}, + {"x": 8, "y": 0}, + {"x": 9, "y": 0}, + {"x": 10, "y": 0}, + {"x": 11, "y": 0}, + {"x": 12, "y": 0}, + {"x": 13, "y": 0}, + {"x": 14, "y": 0}, + + {"x": 0, "y": 1, "w": 1.5}, + {"x": 1.5, "y": 1}, + {"x": 2.5, "y": 1}, + {"x": 3.5, "y": 1}, + {"x": 4.5, "y": 1}, + {"x": 5.5, "y": 1}, + {"x": 6.5, "y": 1}, + {"x": 7.5, "y": 1}, + {"x": 8.5, "y": 1}, + {"x": 9.5, "y": 1}, + {"x": 10.5, "y": 1}, + {"x": 11.5, "y": 1}, + {"x": 12.5, "y": 1}, + {"x": 13.5, "y": 1, "w": 1.5}, + + {"x": 0, "y": 2, "w": 1.75}, + {"x": 1.75, "y": 2}, + {"x": 2.75, "y": 2}, + {"x": 3.75, "y": 2}, + {"x": 4.75, "y": 2}, + {"x": 5.75, "y": 2}, + {"x": 6.75, "y": 2}, + {"x": 7.75, "y": 2}, + {"x": 8.75, "y": 2}, + {"x": 9.75, "y": 2}, + {"x": 10.75, "y": 2}, + {"x": 11.75, "y": 2}, + {"x": 12.75, "y": 2, "w": 2.25}, + + {"x": 0, "y": 3, "w": 2.25}, + {"x": 2.25, "y": 3}, + {"x": 3.25, "y": 3}, + {"x": 4.25, "y": 3}, + {"x": 5.25, "y": 3}, + {"x": 6.25, "y": 3}, + {"x": 7.25, "y": 3}, + {"x": 8.25, "y": 3}, + {"x": 9.25, "y": 3}, + {"x": 10.25, "y": 3}, + {"x": 11.25, "y": 3}, + {"x": 12.25, "y": 3, "w": 1.75}, + {"x": 14, "y": 3}, + + {"x": 0, "y": 4, "w": 1.5}, + {"x": 1.5, "y": 4}, + {"x": 2.5, "y": 4, "w": 1.5}, + {"x": 4, "y": 4, "w": 7}, + {"x": 11, "y": 4, "w": 1.5}, + {"x": 12.5, "y": 4}, + {"x": 13.5, "y": 4, "w": 1.5}, + ] + }, + "LAYOUT_60_iso_tsangan": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0, "w":2}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2}, + {"x":13.75, "y":1, "w":1.25, "h":2}, + + {"x": 0, "y": 3, "w": 2.25}, + {"x": 2.25, "y": 3}, + {"x": 3.25, "y": 3}, + {"x": 4.25, "y": 3}, + {"x": 5.25, "y": 3}, + {"x": 6.25, "y": 3}, + {"x": 7.25, "y": 3}, + {"x": 8.25, "y": 3}, + {"x": 9.25, "y": 3}, + {"x": 10.25, "y": 3}, + {"x": 11.25, "y": 3}, + {"x": 12.25, "y": 3, "w": 1.75}, + {"x": 14, "y": 3}, + + {"x":0, "y": 4, "w": 1.5}, + {"x":1.5, "y": 4}, + {"x":2.5, "y": 4, "w": 1.5}, + {"x":4, "y": 4, "w": 7}, + {"x":11, "y": 4, "w": 1.5}, + {"x":12.5, "y": 4}, + {"x":13.5, "y": 4, "w": 1.5}, + ] + }, + "LAYOUT_60_iso": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0}, + {"x":14, "y":0}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2}, + {"x":13.75, "y":1, "w":1.25, "h":2}, + + {"x":2.25, "y":3}, + {"x":3.25, "y":3}, + {"x":4.25, "y":3}, + {"x":5.25, "y":3}, + {"x":6.25, "y":3}, + {"x":7.25, "y":3}, + {"x":8.25, "y":3}, + {"x":9.25, "y":3}, + {"x":10.25, "y":3}, + {"x":11.25, "y":3}, + {"x":12.25, "y":3, "w":2.75}, + + {"x":0, "y":4, "w":1.25}, + {"x":1.25, "y":4, "w":1.25}, + {"x":2.5, "y":4, "w":1.25}, + {"x":3.75, "y":4, "w":6.25}, + {"x":10, "y":4, "w":1.25}, + {"x":11.25, "y":4, "w":1.25}, + {"x":12.5, "y":4, "w":1.25}, + {"x":13.75, "y":4, "w":1.25} + ] + }, + "LAYOUT_60_iso_tsangan": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0}, + {"x":14, "y":0}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2}, + {"x":13.75, "y":1, "w":1.25, "h":2}, + + {"x": 0, "y": 3, "w": 2.25}, + {"x": 2.25, "y": 3}, + {"x": 3.25, "y": 3}, + {"x": 4.25, "y": 3}, + {"x": 5.25, "y": 3}, + {"x": 6.25, "y": 3}, + {"x": 7.25, "y": 3}, + {"x": 8.25, "y": 3}, + {"x": 9.25, "y": 3}, + {"x": 10.25, "y": 3}, + {"x": 11.25, "y": 3}, + {"x": 12.25, "y": 3, "w": 1.75}, + {"x": 14, "y": 3}, + + {"x":0, "y": 4, "w": 1.5}, + {"x":1.5, "y": 4}, + {"x":2.5, "y": 4, "w": 1.5}, + {"x":4, "y": 4, "w": 7}, + {"x":11, "y": 4, "w": 1.5}, + {"x":12.5, "y": 4}, + {"x":13.5, "y": 4, "w": 1.5}, + ] + }, + "LAYOUT_60_all": { + "layout": [ + {"x":0, "y":0}, + {"x":1, "y":0}, + {"x":2, "y":0}, + {"x":3, "y":0}, + {"x":4, "y":0}, + {"x":5, "y":0}, + {"x":6, "y":0}, + {"x":7, "y":0}, + {"x":8, "y":0}, + {"x":9, "y":0}, + {"x":10, "y":0}, + {"x":11, "y":0}, + {"x":12, "y":0}, + {"x":13, "y":0, "w":2}, + + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":1}, + {"x":2.5, "y":1}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1}, + {"x":5.5, "y":1}, + {"x":6.5, "y":1}, + {"x":7.5, "y":1}, + {"x":8.5, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":1}, + {"x":11.5, "y":1}, + {"x":12.5, "y":1}, + + {"x":0, "y":2, "w":1.75}, + {"x":1.75, "y":2}, + {"x":2.75, "y":2}, + {"x":3.75, "y":2}, + {"x":4.75, "y":2}, + {"x":5.75, "y":2}, + {"x":6.75, "y":2}, + {"x":7.75, "y":2}, + {"x":8.75, "y":2}, + {"x":9.75, "y":2}, + {"x":10.75, "y":2}, + {"x":11.75, "y":2}, + {"x":12.75, "y":2}, + {"x":13.75, "y":1, "w":1.25, "h":2}, + + {"x":0, "y":3, "w":2}, + {"x":2, "y":3}, + {"x":3, "y":3}, + {"x":4, "y":3}, + {"x":5, "y":3}, + {"x":6, "y":3}, + {"x":7, "y":3}, + {"x":8, "y":3}, + {"x":9, "y":3}, + {"x":10, "y":3}, + {"x":11, "y":3}, + {"x":12, "y":3}, + {"x":13, "y":3}, + {"x":14, "y":3}, + + {"x":0, "y": 4, "w": 1.5}, + {"x":1.5, "y": 4}, + {"x":2.5, "y": 4, "w": 1.5}, + {"x":4, "y": 4, "w": 7}, + {"x":11, "y": 4, "w": 1.5}, + {"x":12.5, "y": 4}, + {"x":13.5, "y": 4, "w": 1.5}, + ] + } + } +} diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_all/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_all/keymap.c new file mode 100644 index 0000000000..b8b48194a6 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_all/keymap.c @@ -0,0 +1,35 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_SLSH, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_all( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), +}; diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_all/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_all/readme.md new file mode 100644 index 0000000000..e8ab0065f2 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_all/readme.md @@ -0,0 +1 @@ +# The keymap for krush60 solder full layout \ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_7u/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_7u/keymap.c new file mode 100644 index 0000000000..3d454579cb --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_7u/keymap.c @@ -0,0 +1,37 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_ansi_7u_spc( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL + ) + [1] = LAYOUT_60_ansi_7u_spc( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; + + diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_7u/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_7u/readme.md new file mode 100644 index 0000000000..b7ec93ca7b --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_7u/readme.md @@ -0,0 +1 @@ +# The keymap for krush60 solder layout ansi 7U \ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow/keymap.c new file mode 100644 index 0000000000..b6fb88bb8a --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow/keymap.c @@ -0,0 +1,35 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_ansi_arrow( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ) + [1] = LAYOUT_60_ansi_arrow( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; \ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow/readme.md new file mode 100644 index 0000000000..561b615d24 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow/readme.md @@ -0,0 +1 @@ +# The keymap for krush60 solder layout ansi arrow \ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_7u/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_7u/keymap.c new file mode 100644 index 0000000000..f22e073bf5 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_7u/keymap.c @@ -0,0 +1,35 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_ansi_arrow_7u_spc( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ) + [1] = LAYOUT_60_ansi_arrow_7u_spc( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; \ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_7u/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_7u/readme.md new file mode 100644 index 0000000000..578753b3ae --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_7u/readme.md @@ -0,0 +1 @@ +# The keymap for krush60 solder layout ansi 7U arrow \ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_bs/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_bs/keymap.c new file mode 100644 index 0000000000..8ba292cfd4 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_bs/keymap.c @@ -0,0 +1,35 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_ansi_arrow_split_bs( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ) + [1] = LAYOUT_60_ansi_arrow_split_bs( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_bs/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_bs/readme.md new file mode 100644 index 0000000000..505c1ec9bc --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_bs/readme.md @@ -0,0 +1 @@ +# The keymap for krush60 solder layout ansi arrow split backspace \ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_bs_7u/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_bs_7u/keymap.c new file mode 100644 index 0000000000..56a713d56e --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_bs_7u/keymap.c @@ -0,0 +1,35 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_ansi_arrow_split_bs_7u_spc( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ) + [1] = LAYOUT_60_ansi_arrow_split_bs_7u_spc( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; \ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_bs_7u/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_bs_7u/readme.md new file mode 100644 index 0000000000..059534d5df --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_bs_7u/readme.md @@ -0,0 +1 @@ +# The keymap for krush60 solder layout ansi arrow, 7u spacebar & split backspace \ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_bs_spc/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_bs_spc/keymap.c new file mode 100644 index 0000000000..8673ce02d1 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_bs_spc/keymap.c @@ -0,0 +1,35 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_ansi_arrow_split_bs_spc( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ) + [1] = LAYOUT_60_ansi_arrow_split_bs_spc( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_bs_spc/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_bs_spc/readme.md new file mode 100644 index 0000000000..2355c409a0 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_bs_spc/readme.md @@ -0,0 +1 @@ +# The keymap for krush60 solder layout ansi arrow, split spacebar & split backspace \ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_spc/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_spc/keymap.c new file mode 100644 index 0000000000..1da11323e4 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_spc/keymap.c @@ -0,0 +1,37 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_ansi_arrow_split_spc( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_RSFT, KC_UP, KC_SLSH, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ) + [1] = LAYOUT_60_ansi_arrow_split_spc( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; + + diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_spc/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_spc/readme.md new file mode 100644 index 0000000000..af2fce05c2 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_arrow_splt_spc/readme.md @@ -0,0 +1 @@ +# The keymap for krush60 solder layout ansi arrow & split spacebar \ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_bs/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_bs/keymap.c new file mode 100644 index 0000000000..ff0fd21deb --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_bs/keymap.c @@ -0,0 +1,35 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_ansi_split_bs( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL), + + [0] = LAYOUT_60_ansi_split_bs( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, KC_END, KC_PGDN, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) +}; + diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_bs/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_bs/readme.md new file mode 100644 index 0000000000..80634c350f --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_bs/readme.md @@ -0,0 +1 @@ +# The keymap for krush60 solder layout split backspace \ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_bs_7u/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_bs_7u/keymap.c new file mode 100644 index 0000000000..431fb483fd --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_bs_7u/keymap.c @@ -0,0 +1,35 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_ansi_split_bs_7u_spc( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL), + + [0] = LAYOUT_60_ansi_split_bs_7u_spc( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_DEL, KC_END, KC_PGDN, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) +}; + diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_bs_7u/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_bs_7u/readme.md new file mode 100644 index 0000000000..70b3a8617b --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_bs_7u/readme.md @@ -0,0 +1 @@ +# The keymap for krush60 solder layout 7u spacebar & split backspace \ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_bs_spc/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_bs_spc/keymap.c new file mode 100644 index 0000000000..e3982e2507 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_bs_spc/keymap.c @@ -0,0 +1,35 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_ansi_split_bs_spc( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL), + + [1] = LAYOUT_60_ansi_split_bs_spc( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, KC_END, KC_PGDN, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) +}; + diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_bs_spc/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_bs_spc/readme.md new file mode 100644 index 0000000000..6e1981c3ce --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_bs_spc/readme.md @@ -0,0 +1 @@ +# The keymap for krush60 solder layout split spacebar & split backspace \ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_spc/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_spc/keymap.c new file mode 100644 index 0000000000..abcd186ccc --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_spc/keymap.c @@ -0,0 +1,35 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_ansi_split_spc( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL), + + [1] = LAYOUT_60_ansi_split_spc( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_DEL, KC_END, KC_PGDN, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) +}; + diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_spc/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_spc/readme.md new file mode 100644 index 0000000000..80634c350f --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_ansi_splt_spc/readme.md @@ -0,0 +1 @@ +# The keymap for krush60 solder layout split backspace \ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_tsangan/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_tsangan/keymap.c new file mode 100644 index 0000000000..cc8067cc99 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_tsangan/keymap.c @@ -0,0 +1,36 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_ansi_tsangan( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL + ) + [1] = LAYOUT_60_ansi_tsangan( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; + diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_tsangan/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_tsangan/readme.md new file mode 100644 index 0000000000..5bdb4a1026 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_tsangan/readme.md @@ -0,0 +1 @@ +# The keymap for krush60 solder Tsangan \ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_tsangan_splt_bs/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_tsangan_splt_bs/keymap.c new file mode 100644 index 0000000000..9fba9e6bf3 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_tsangan_splt_bs/keymap.c @@ -0,0 +1,35 @@ +/* Copyright 2021 REPLACE_WITH_YOUR_NAME + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_60_ansi_tsangan_split_bs( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL + ) + [1] = LAYOUT_60_ansi_tsangan_split_bs( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_PSCR, KC_SLCK, KC_PAUS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_INS, KC_HOME, KC_PGUP, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_tsangan_splt_bs/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_tsangan_splt_bs/readme.md new file mode 100644 index 0000000000..03c0444cc6 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/60_tsangan_splt_bs/readme.md @@ -0,0 +1 @@ +# The keymap for krush60 solder Tsangan & split backspace \ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/default/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/default/keymap.c new file mode 100644 index 0000000000..f1ef9911dd --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/default/keymap.c @@ -0,0 +1,40 @@ +/* Copyright 2021 REPLACE_WITH_YOUR_NAME + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ + * │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │ Backsp│ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┤ + * │ Tab │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │  \  │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┤ + * │ Caps │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │  Enter │ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────────┤ + * │ Shift  │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │    Shift │ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬────┬────┤ + * │Ctrl│GUI │Alt │                        │ Alt│ GUI│Menu│Ctrl│ + * └────┴────┴────┴────────────────────────┴────┴────┴────┴────┘ + */ + [0] = LAYOUT_60_ansi( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL + ) +}; diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/default/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/default/readme.md new file mode 100644 index 0000000000..88157e507e --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/default/readme.md @@ -0,0 +1 @@ +# The keymap default for krush60 \ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/via/keymap.c b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/via/keymap.c new file mode 100644 index 0000000000..a6e005bbbb --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/via/keymap.c @@ -0,0 +1,49 @@ +/* Copyright 2021 REPLACE_WITH_YOUR_NAME + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_all( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_SLSH, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(0), KC_LEFT, KC_LALT, KC_LCTL + ), + [1] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [2] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [3] = LAYOUT_all( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/via/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/via/readme.md new file mode 100644 index 0000000000..8f8d7a19bd --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/via/readme.md @@ -0,0 +1 @@ +# The keymap VIA for krush60 \ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/keymaps/via/rules.mk b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/via/rules.mk new file mode 100644 index 0000000000..036bd6d1c3 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes \ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/readme.md b/keyboards/sawnsprojects/krush/krush60/solder/readme.md new file mode 100644 index 0000000000..36da34d372 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/readme.md @@ -0,0 +1,15 @@ +# Krush60 solder + +![Krush60](https://cdn.discordapp.com/attachments/898507964942536715/906171092916391956/252763374_2899749087003964_8763371038132517512_n.png) + +A 60% keyboard PCB made and sold by SawnsProjects with Nuxros in [Facebook](https://www.facebook.com/groups/vnmkmarket/posts/1412997345762674). + +* Keyboard Maintainer: [Mai The San](https://github.com/MaiTheSan) +* Hardware Supported: 60% keyboard case +* Hardware Availability: [Facebook](https://www.facebook.com/groups/vnmkmarket/posts/1412997345762674) + +Make example for this keyboard (after setting up your build environment): + + make sawnsprojects/krush60/solder:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). \ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/rules.mk b/keyboards/sawnsprojects/krush/krush60/solder/rules.mk new file mode 100644 index 0000000000..439db87a58 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/rules.mk @@ -0,0 +1,22 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow + +LAYOUTS = 60_ansi 60_ansi_arrow 60_ansi_arrow_split_bs_7u_spc diff --git a/keyboards/sawnsprojects/krush/krush60/solder/solder.c b/keyboards/sawnsprojects/krush/krush60/solder/solder.c new file mode 100644 index 0000000000..2fb9b24f8c --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/solder.c @@ -0,0 +1,17 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "solder.h" \ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush60/solder/solder.h b/keyboards/sawnsprojects/krush/krush60/solder/solder.h new file mode 100644 index 0000000000..d4847b9124 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush60/solder/solder.h @@ -0,0 +1,335 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" +#define XXX KC_NO +//x +#define LAYOUT_all( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K66, K77, \ + K80, K90, K81, K82, K92, K84, K94, K85, K86, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, K17 }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, K65, K66, XXX }, \ + { K70, K71, K72, K73, K74, K75, XXX, K77 }, \ + { K80, K81, K82, XXX, K84, K85, K86, XXX }, \ + { K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ +} + +//LAYOUT_60_ansi +//x +#define LAYOUT_60_ansi( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, \ + K80, K90, K81, K92, K94, K85, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, xxx }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, K65, K66, XXX }, \ + { K70, K71, K72, K73, K74, xxx, XXX, xxx }, \ + { K80, K81, xxx, XXX, xxx, K85, xxx, XXX }, \ + { K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ +} +//LAYOUT_60_iso +//x +#define LAYOUT_60_iso(\ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, \ + K80, K90, K81, K92, K94, K85, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, xxx }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, K65, K66, XXX }, \ + { K70, K71, K72, K73, K74, xxx, XXX, xxx }, \ + { K80, K81, xxx, XXX, xxx, K85, xxx, XXX }, \ + { K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ +} +//LAYOUT_60_ansi_split_bs +#define LAYOUT_60_ansi_split_bs( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, \ + K80, K90, K81, K92, K94, K85, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, K17 }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, K65, K66, XXX }, \ + { K70, K71, K72, K73, K74, xxx, XXX, xxx }, \ + { K80, K81, xxx, XXX, xxx, K85, xxx, XXX }, \ + { K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ +} +//LAYOUT_60_ansi_split_spc +#define LAYOUT_60_ansi_split_spc( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, \ + K80, K90, K81, K82, K92, K84, K94, K85, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, xxx }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, K65, K66, XXX }, \ + { K70, K71, K72, K73, K74, xxx, XXX, xxx }, \ + { K80, K81, K82, XXX, K84, K85, xxx, XXX }, \ + { K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ +} +//LAYOUT_60_ansi_split_bs_spc +#define LAYOUT_60_ansi_split_bs_spc( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, \ + K80, K90, K81, K82, K92, K84, K94, K85, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, K17 }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, K65, K66, XXX }, \ + { K70, K71, K72, K73, K74, xxx, XXX, xxx }, \ + { K80, K81, K82, XXX, K84, K85, xxx, XXX }, \ + { K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ +} +//LAYOUT_60_ansi_7u_spc +#define LAYOUT_60_ansi_7u_spc( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, \ + K80, K90, K81, K92, K85, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, xxx }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, K65, K66, XXX }, \ + { K70, K71, K72, K73, K74, xxx, XXX, xxx }, \ + { K80, K81, xxx, XXX, xxx, K85, xxx, XXX }, \ + { K90, XXX, K92, XXX, xxx, K95, XXX, K97 }, \ +} +//LAYOUT_60_ansi_split_7u_spc +#define LAYOUT_60_ansi_split_bs_7u_spc( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, \ + K80, K90, K81, K92, K85, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, K17 }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, K65, K66, XXX }, \ + { K70, K71, K72, K73, K74, xxx, XXX, xxx }, \ + { K80, K81, xxx, XXX, xxx, K85, xxx, XXX }, \ + { K90, XXX, K92, XXX, xxx, K95, XXX, K97 }, \ +} +//LAYOUT_60_ansi_arrow_split_bs +#define LAYOUT_60_ansi_arrow_split_bs( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K75, K66, K77, \ + K80, K90, K81, K92, K94, K85, K86, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, K17 }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, xxx, K66, XXX }, \ + { K70, K71, K72, K73, K74, K75, XXX, K77 }, \ + { K80, K81, xxx, XXX, xxx, K85, K86, XXX }, \ + { K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ +} +//LAYOUT_60_ansi_arrow_split_spc +#define LAYOUT_60_ansi_arrow_split_spc( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K75, K66, K77, \ + K80, K90, K81, K82, K92, K84, K94, K85, K86, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, xxx }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, xxx, K66, XXX }, \ + { K70, K71, K72, K73, K74, K75, XXX, K77 }, \ + { K80, K81, K82, XXX, K84, K85, K86, XXX }, \ + { K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ +} +//LAYOUT_60_ansi_arrow_split_bs_spc +#define LAYOUT_60_ansi_arrow_split_bs_spc( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K75, K66, K77, \ + K80, K90, K81, K82, K92, K84, K94, K85, K86, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, K17 }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, xxx, K66, XXX }, \ + { K70, K71, K72, K73, K74, K75, XXX, K77 }, \ + { K80, K81, K82, XXX, K84, K85, K86, XXX }, \ + { K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ +} +//LAYOUT_60_ansi_arrow_7u_spc +#define LAYOUT_60_ansi_arrow_7u_spc( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K75, K66, K77, \ + K80, K90, K81, K92, K85, K86, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, xxx }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, xxx, K66, XXX }, \ + { K70, K71, K72, K73, K74, K75, XXX, K77 }, \ + { K80, K81, xxx, XXX, xxx, K85, K86, XXX }, \ + { K90, XXX, K92, XXX, xxx, K95, XXX, K97 }, \ +} +//LAYOUT_60_ansi_arrow +//x +#define LAYOUT_60_ansi_arrow( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K75, K66, K77, \ + K80, K90, K81, K92, K94, K85, K86, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, xxx }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, xxx, K66, XXX }, \ + { K70, K71, K72, K73, K74, K75, XXX, K77 }, \ + { K80, K81, xxx, XXX, xxx, K85, K86, XXX }, \ + { K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ +} +//x +//LAYOUT_60_ansi_arrow_split_bs_7u_spc +#define LAYOUT_60_ansi_arrow_split_bs_7u_spc( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K75, K66, K77, \ + K80, K90, K81, K92, K85, K86, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, K17 }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, xxx, K66, XXX }, \ + { K70, K71, K72, K73, K74, K75, XXX, K77 }, \ + { K80, K81, xxx, XXX, xxx, K85, K86, XXX }, \ + { K90, XXX, K92, XXX, xxx, K95, XXX, K97 }, \ +} +//LAYOUT_60_ansi_tsangan +#define LAYOUT_60_ansi_tsangan( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, K77, \ + K80, K90, K81, K92, K85, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, xxx }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, K65, K66, XXX }, \ + { K70, K71, K72, K73, K74, xxx, XXX, K77 }, \ + { K80, K81, xxx, XXX, xxx, K85, xxx, XXX }, \ + { K90, XXX, K92, XXX, xxx, K95, XXX, K97 }, \ +} +//LAYOUT_60_ansi_tsangan_split_bs +#define LAYOUT_60_ansi_tsangan_split_bs( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K66, K77, \ + K80, K90, K81, K92, K85, K95, K97 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, XXX }, \ + { K10, K11, K12, K13, K14, K15, XXX, K17 }, \ + { K20, K21, K22, K23, K24, K25, K26, XXX }, \ + { K30, K31, K32, K33, K34, K35, K36, XXX }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ + { K60, K61, K62, K63, K64, K65, K66, XXX }, \ + { K70, K71, K72, K73, K74, xxx, XXX, K77 }, \ + { K80, K81, xxx, XXX, xxx, K85, xxx, XXX }, \ + { K90, XXX, K92, XXX, xxx, K95, XXX, K97 }, \ +} +//LAYOUT_60_iso_tsangan +#define LAYOUT_60_iso_tsangan LAYOUT_60_ansi_tsangan +//LAYOUT_60_iso_tsangan_split_bs +#define LAYOUT_60_iso_tsangan_split_bs LAYOUT_60_ansi_tsangan_split_bs + + diff --git a/keyboards/sawnsprojects/krush/krush65/readme.md b/keyboards/sawnsprojects/krush/krush65/readme.md new file mode 100644 index 0000000000..34e996f0bf --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/readme.md @@ -0,0 +1,25 @@ +# Krush65 + +A 65% keyboard sold in several variants. + +1. [Solder](solder/): 06/2021. Atmega32u4 soldered keyboard. Sold under the name "Krush65" with krush keyboard case. Compatible with some KBD67 case. + + **Firmware files are SPECIFIC to each board. Firmware files from one, will not work on the other.** Please use the `.hex` or `.bin` appropriate for your board. + +* Keyboard Maintainer: [SawnsProjects](https://github.com/MaiTheSan) +* Hardware Supported: Krush65 +* Hardware Availability: [Mechkey.store](https://mechkey.store/) + +Make examples for this keyboard (after setting up your build environment): + + make sawnsprojects/krush/krush65/solder:default + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). \ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/solder/config.h b/keyboards/sawnsprojects/krush/krush65/solder/config.h new file mode 100644 index 0000000000..9356e6cfba --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/config.h @@ -0,0 +1,68 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x5350 +#define PRODUCT_ID 0x6B31 +#define DEVICE_VER 0x0001 +#define MANUFACTURER SawnsProjects +#define PRODUCT Krush65 - Solder + +/* key matrix size */ +#define MATRIX_ROWS 10 +#define MATRIX_COLS 8 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { B1, B2, D1, D2, D4, D6, F6, F7, F5, F4 } +#define MATRIX_COL_PINS { C7, C6, B6, B5, B4, D7, D5, D3 } +#define UNUSED_PINS + +/* indicator */ +// #define LED_CAPS_LOCK_PIN F0 + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW +/* Caps Lock */ +#define LED_CAPS_LOCK_PIN F0 + +/* rotary */ +#define ENCODERS_PAD_A { D0 } +#define ENCODERS_PAD_B { B3 } +#define ENCODER_RESOLUTION 4 + +#define RGB_DI_PIN F1 +#ifdef RGB_DI_PIN + #define RGBLED_NUM 20 + #define RGBLIGHT_HUE_STEP 8 + #define RGBLIGHT_SAT_STEP 8 + #define RGBLIGHT_VAL_STEP 8 + #define RGBLIGHT_LIMIT_VAL 200 /* The maximum brightness level */ + #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE +#endif \ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/solder/encoder_actions.c b/keyboards/sawnsprojects/krush/krush65/solder/encoder_actions.c new file mode 100644 index 0000000000..039f8739b4 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/encoder_actions.c @@ -0,0 +1,58 @@ +/* Copyright 2020 Neil Brian Ramirez + * Copyright 2021 drashna jael're (@drashna) + * Copyright 2021 uybv + * Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "encoder_actions.h" + +#ifdef ENCODER_ENABLE + +# ifdef ENCODERS +static uint8_t encoder_state[ENCODERS] = {0}; +static keypos_t encoder_cw[ENCODERS] = ENCODERS_CW_KEY; +static keypos_t encoder_ccw[ENCODERS] = ENCODERS_CCW_KEY; +# endif + +void encoder_action_unregister(void) { +# ifdef ENCODERS + for (int index = 0; index < ENCODERS; ++index) { + if (encoder_state[index]) { + keyevent_t encoder_event = (keyevent_t) { + .key = encoder_state[index] >> 1 ? encoder_cw[index] : encoder_ccw[index], + .pressed = false, + .time = (timer_read() | 1) + }; + encoder_state[index] = 0; + action_exec(encoder_event); + } + } +# endif +} + +void encoder_action_register(uint8_t index, bool clockwise) { +# ifdef ENCODERS + keyevent_t encoder_event = (keyevent_t) { + .key = clockwise ? encoder_cw[index] : encoder_ccw[index], + .pressed = true, + .time = (timer_read() | 1) + }; + encoder_state[index] = (clockwise ^ 1) | (clockwise << 1); + action_exec(encoder_event); +# endif +} + +#endif \ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/solder/encoder_actions.h b/keyboards/sawnsprojects/krush/krush65/solder/encoder_actions.h new file mode 100644 index 0000000000..098210d40c --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/encoder_actions.h @@ -0,0 +1,21 @@ +/* Copyright 2020 Neil Brian Ramirez + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "quantum.h" + +void encoder_action_unregister(void); + +void encoder_action_register(uint8_t index, bool clockwise); \ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/solder/info.json b/keyboards/sawnsprojects/krush/krush65/solder/info.json new file mode 100644 index 0000000000..6c10d660e2 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/info.json @@ -0,0 +1,299 @@ +{ + "keyboard_name": "Krush65 Solder", + "url": "", + "maintainer": "MaiTheSan", + "layouts": { + "LAYOUT_all": { + "layout": [ + { "label": "K00 (B1,C7)", "x": 0, "y": 0 }, + { "label": "K10 (B2,C7)", "x": 1, "y": 0 }, + { "label": "K01 (B1,C6)", "x": 2, "y": 0 }, + { "label": "K11 (B2,C6)", "x": 3, "y": 0 }, + { "label": "K02 (B1,B6)", "x": 4, "y": 0 }, + { "label": "K12 (B2,B6)", "x": 5, "y": 0 }, + { "label": "K03 (B1,B5)", "x": 6, "y": 0 }, + { "label": "K13 (B2,B5)", "x": 7, "y": 0 }, + { "label": "K04 (B1,B4)", "x": 8, "y": 0 }, + { "label": "K14 (B2,B4)", "x": 9, "y": 0 }, + { "label": "K05 (B1,D7)", "x": 10, "y": 0 }, + { "label": "K15 (B2,D7)", "x": 11, "y": 0 }, + { "label": "K06 (B1,D5)", "x": 12, "y": 0 }, + { "label": "K26 (D1,D5)", "x": 13, "y": 0 }, + { "label": "K17 (B2,D3)", "x": 14, "y": 0 }, + { "label": "K07 (B1,D3)", "x": 15, "y": 0 }, + { "label": "K20 (D1,C7)", "x": 0, "y": 1, "w": 1.5 }, + { "label": "K30 (D2,C7)", "x": 1.5, "y": 1 }, + { "label": "K21 (D1,C6)", "x": 2.5, "y": 1 }, + { "label": "K31 (D2,C6)", "x": 3.5, "y": 1 }, + { "label": "K22 (D1,B6)", "x": 4.5, "y": 1 }, + { "label": "K32 (D2,B6)", "x": 5.5, "y": 1 }, + { "label": "K23 (D1,B5)", "x": 6.5, "y": 1 }, + { "label": "K33 (D2,B5)", "x": 7.5, "y": 1 }, + { "label": "K24 (D1,B4)", "x": 8.5, "y": 1 }, + { "label": "K34 (D2,B4)", "x": 9.5, "y": 1 }, + { "label": "K25 (D1,D7)", "x": 10.5, "y": 1 }, + { "label": "K35 (D2,D7)", "x": 11.5, "y": 1 }, + { "label": "K36 (D2,D5)", "x": 12.5, "y": 1 }, + { "label": "K46 (D4,D5)", "x": 13.5, "y": 1, "w": 1.5 }, + { "label": "K37 (D2,D3)", "x": 15, "y": 1 }, + { "label": "K40 (D4,C7)", "x": 0, "y": 2, "w": 1.75 }, + { "label": "K50 (D6,C7)", "x": 1.75, "y": 2 }, + { "label": "K41 (D4,C6)", "x": 2.75, "y": 2 }, + { "label": "K51 (D6,C6)", "x": 3.75, "y": 2 }, + { "label": "K42 (D4,B6)", "x": 4.75, "y": 2 }, + { "label": "K52 (D6,B6)", "x": 5.75, "y": 2 }, + { "label": "K43 (D4,B5)", "x": 6.75, "y": 2 }, + { "label": "K53 (D6,B5)", "x": 7.75, "y": 2 }, + { "label": "K44 (D4,B4)", "x": 8.75, "y": 2 }, + { "label": "K54 (D6,B4)", "x": 9.75, "y": 2 }, + { "label": "K45 (D4,D7)", "x": 10.75, "y": 2 }, + { "label": "K55 (D6,D7)", "x": 11.75, "y": 2 }, + { "label": "K47 (D4,D3)", "x": 12.75, "y": 2, "w": 2.25 }, + { "label": "K57 (D6,D3)", "x": 15, "y": 2 }, + { "label": "K60 (F6,C7)", "x": 0, "y": 3, "w": 2.25 }, + { "label": "K70 (F7,C7)", "x": 2.25, "y": 3 }, + { "label": "K61 (F6,C6)", "x": 3.25, "y": 3 }, + { "label": "K71 (F7,C6)", "x": 4.25, "y": 3 }, + { "label": "K62 (F6,B6)", "x": 5.25, "y": 3 }, + { "label": "K72 (F7,B6)", "x": 6.25, "y": 3 }, + { "label": "K63 (F6,B5)", "x": 7.25, "y": 3 }, + { "label": "K73 (F7,B5)", "x": 8.25, "y": 3 }, + { "label": "K64 (F6,B4)", "x": 9.25, "y": 3 }, + { "label": "K74 (F7,B4)", "x": 10.25, "y": 3 }, + { "label": "K65 (F6,D7)", "x": 11.25, "y": 3 }, + { "label": "K75 (F7,D7)", "x": 12.25, "y": 3, "w": 1.75 }, + { "label": "K77 (F7,D3)", "x": 14, "y": 3 }, + { "label": "K67 (F6,D3)", "x": 15, "y": 3 }, + { "label": "K80 (F5,C7)", "x": 0, "y": 4, "w": 1.25 }, + { "label": "K90 (F4,C7)", "x": 1.25, "y": 4, "w": 1.25 }, + { "label": "K81 (F5,C6)", "x": 2.5, "y": 4, "w": 1.25 }, + { "label": "K82 (F5,B6)", "x": 3.75, "y": 4, "w": 2.25 }, + { "label": "K92 (F4,B6)", "x": 6, "y": 4, "w": 1.25 }, + { "label": "K93 (F4,B5)", "x": 7.25, "y": 4, "w": 2.75 }, + { "label": "K94 (F4,B4)", "x": 10, "y": 4, "w": 1.25 }, + { "label": "K85 (F5,D7)", "x": 11.25, "y": 4, "w": 1.25 }, + { "label": "K95 (F4,D7)", "x": 13, "y": 4 }, + { "label": "K97 (F4,D3)", "x": 14, "y": 4 }, + { "label": "K87 (F5,D3)", "x": 15, "y": 4 } + ] + }, + "LAYOUT_65_ansi_blocker_split_bs_sp": { + "layout": [ + { "label": "K00 (B1,C7)", "x": 0, "y": 0 }, + { "label": "K10 (B2,C7)", "x": 1, "y": 0 }, + { "label": "K01 (B1,C6)", "x": 2, "y": 0 }, + { "label": "K11 (B2,C6)", "x": 3, "y": 0 }, + { "label": "K02 (B1,B6)", "x": 4, "y": 0 }, + { "label": "K12 (B2,B6)", "x": 5, "y": 0 }, + { "label": "K03 (B1,B5)", "x": 6, "y": 0 }, + { "label": "K13 (B2,B5)", "x": 7, "y": 0 }, + { "label": "K04 (B1,B4)", "x": 8, "y": 0 }, + { "label": "K14 (B2,B4)", "x": 9, "y": 0 }, + { "label": "K05 (B1,D7)", "x": 10, "y": 0 }, + { "label": "K15 (B2,D7)", "x": 11, "y": 0 }, + { "label": "K06 (B1,D5)", "x": 12, "y": 0 }, + { "label": "K26 (D1,D5)", "x": 13, "y": 0 }, + { "label": "K17 (B2,D3)", "x": 14, "y": 0 }, + { "label": "K07 (B1,D3)", "x": 15, "y": 0 }, + { "label": "K20 (D1,C7)", "x": 0, "y": 1, "w": 1.5 }, + { "label": "K30 (D2,C7)", "x": 1.5, "y": 1 }, + { "label": "K21 (D1,C6)", "x": 2.5, "y": 1 }, + { "label": "K31 (D2,C6)", "x": 3.5, "y": 1 }, + { "label": "K22 (D1,B6)", "x": 4.5, "y": 1 }, + { "label": "K32 (D2,B6)", "x": 5.5, "y": 1 }, + { "label": "K23 (D1,B5)", "x": 6.5, "y": 1 }, + { "label": "K33 (D2,B5)", "x": 7.5, "y": 1 }, + { "label": "K24 (D1,B4)", "x": 8.5, "y": 1 }, + { "label": "K34 (D2,B4)", "x": 9.5, "y": 1 }, + { "label": "K25 (D1,D7)", "x": 10.5, "y": 1 }, + { "label": "K35 (D2,D7)", "x": 11.5, "y": 1 }, + { "label": "K36 (D2,D5)", "x": 12.5, "y": 1 }, + { "label": "K46 (D4,D5)", "x": 13.5, "y": 1, "w": 1.5 }, + { "label": "K37 (D2,D3)", "x": 15, "y": 1 }, + { "label": "K40 (D4,C7)", "x": 0, "y": 2, "w": 1.75 }, + { "label": "K50 (D6,C7)", "x": 1.75, "y": 2 }, + { "label": "K41 (D4,C6)", "x": 2.75, "y": 2 }, + { "label": "K51 (D6,C6)", "x": 3.75, "y": 2 }, + { "label": "K42 (D4,B6)", "x": 4.75, "y": 2 }, + { "label": "K52 (D6,B6)", "x": 5.75, "y": 2 }, + { "label": "K43 (D4,B5)", "x": 6.75, "y": 2 }, + { "label": "K53 (D6,B5)", "x": 7.75, "y": 2 }, + { "label": "K44 (D4,B4)", "x": 8.75, "y": 2 }, + { "label": "K54 (D6,B4)", "x": 9.75, "y": 2 }, + { "label": "K45 (D4,D7)", "x": 10.75, "y": 2 }, + { "label": "K55 (D6,D7)", "x": 11.75, "y": 2 }, + { "label": "K47 (D4,D3)", "x": 12.75, "y": 2, "w": 2.25 }, + { "label": "K57 (D6,D3)", "x": 15, "y": 2 }, + { "label": "K60 (F6,C7)", "x": 0, "y": 3, "w": 2.25 }, + { "label": "K70 (F7,C7)", "x": 2.25, "y": 3 }, + { "label": "K61 (F6,C6)", "x": 3.25, "y": 3 }, + { "label": "K71 (F7,C6)", "x": 4.25, "y": 3 }, + { "label": "K62 (F6,B6)", "x": 5.25, "y": 3 }, + { "label": "K72 (F7,B6)", "x": 6.25, "y": 3 }, + { "label": "K63 (F6,B5)", "x": 7.25, "y": 3 }, + { "label": "K73 (F7,B5)", "x": 8.25, "y": 3 }, + { "label": "K64 (F6,B4)", "x": 9.25, "y": 3 }, + { "label": "K74 (F7,B4)", "x": 10.25, "y": 3 }, + { "label": "K65 (F6,D7)", "x": 11.25, "y": 3 }, + { "label": "K75 (F7,D7)", "x": 12.25, "y": 3, "w": 1.75 }, + { "label": "K77 (F7,D3)", "x": 14, "y": 3 }, + { "label": "K67 (F6,D3)", "x": 15, "y": 3 }, + { "label": "K80 (F5,C7)", "x": 0, "y": 4, "w": 1.25 }, + { "label": "K90 (F4,C7)", "x": 1.25, "y": 4, "w": 1.25 }, + { "label": "K81 (F5,C6)", "x": 2.5, "y": 4, "w": 1.25 }, + { "label": "K82 (F5,B6)", "x": 3.75, "y": 4, "w": 2.25 }, + { "label": "K92 (F4,B6)", "x": 6, "y": 4, "w": 1.25 }, + { "label": "K93 (F4,B5)", "x": 7.25, "y": 4, "w": 2.75 }, + { "label": "K94 (F4,B4)", "x": 10, "y": 4, "w": 1.25 }, + { "label": "K85 (F5,D7)", "x": 11.25, "y": 4, "w": 1.25 }, + { "label": "K95 (F4,D7)", "x": 13, "y": 4 }, + { "label": "K97 (F4,D3)", "x": 14, "y": 4 }, + { "label": "K87 (F5,D3)", "x": 15, "y": 4 } + ] + }, + + "LAYOUT_65_ansi_blocker": { + "layout": [ + { "label": "K00 (B1,C7)", "x": 0, "y": 0 }, + { "label": "K10 (B2,C7)", "x": 1, "y": 0 }, + { "label": "K01 (B1,C6)", "x": 2, "y": 0 }, + { "label": "K11 (B2,C6)", "x": 3, "y": 0 }, + { "label": "K02 (B1,B6)", "x": 4, "y": 0 }, + { "label": "K12 (B2,B6)", "x": 5, "y": 0 }, + { "label": "K03 (B1,B5)", "x": 6, "y": 0 }, + { "label": "K13 (B2,B5)", "x": 7, "y": 0 }, + { "label": "K04 (B1,B4)", "x": 8, "y": 0 }, + { "label": "K14 (B2,B4)", "x": 9, "y": 0 }, + { "label": "K05 (B1,D7)", "x": 10, "y": 0 }, + { "label": "K15 (B2,D7)", "x": 11, "y": 0 }, + { "label": "K06 (B1,D5)", "x": 12, "y": 0 }, + { "label": "K26 (D1,D5)", "x": 13, "y": 0, "w": 2 }, + { "label": "K07 (B1,D3)", "x": 15, "y": 0 }, + { "label": "K20 (D1,C7)", "x": 0, "y": 1, "w": 1.5 }, + { "label": "K30 (D2,C7)", "x": 1.5, "y": 1 }, + { "label": "K21 (D1,C6)", "x": 2.5, "y": 1 }, + { "label": "K31 (D2,C6)", "x": 3.5, "y": 1 }, + { "label": "K22 (D1,B6)", "x": 4.5, "y": 1 }, + { "label": "K32 (D2,B6)", "x": 5.5, "y": 1 }, + { "label": "K23 (D1,B5)", "x": 6.5, "y": 1 }, + { "label": "K33 (D2,B5)", "x": 7.5, "y": 1 }, + { "label": "K24 (D1,B4)", "x": 8.5, "y": 1 }, + { "label": "K34 (D2,B4)", "x": 9.5, "y": 1 }, + { "label": "K25 (D1,D7)", "x": 10.5, "y": 1 }, + { "label": "K35 (D2,D7)", "x": 11.5, "y": 1 }, + { "label": "K36 (D2,D5)", "x": 12.5, "y": 1 }, + { "label": "K46 (D4,D5)", "x": 13.5, "y": 1, "w": 1.5 }, + { "label": "K37 (D2,D3)", "x": 15, "y": 1 }, + { "label": "K40 (D4,C7)", "x": 0, "y": 2, "w": 1.75 }, + { "label": "K50 (D6,C7)", "x": 1.75, "y": 2 }, + { "label": "K41 (D4,C6)", "x": 2.75, "y": 2 }, + { "label": "K51 (D6,C6)", "x": 3.75, "y": 2 }, + { "label": "K42 (D4,B6)", "x": 4.75, "y": 2 }, + { "label": "K52 (D6,B6)", "x": 5.75, "y": 2 }, + { "label": "K43 (D4,B5)", "x": 6.75, "y": 2 }, + { "label": "K53 (D6,B5)", "x": 7.75, "y": 2 }, + { "label": "K44 (D4,B4)", "x": 8.75, "y": 2 }, + { "label": "K54 (D6,B4)", "x": 9.75, "y": 2 }, + { "label": "K45 (D4,D7)", "x": 10.75, "y": 2 }, + { "label": "K55 (D6,D7)", "x": 11.75, "y": 2 }, + { "label": "K47 (D4,D3)", "x": 12.75, "y": 2, "w": 2.25 }, + { "label": "K57 (D6,D3)", "x": 15, "y": 2 }, + { "label": "K60 (F6,C7)", "x": 0, "y": 3, "w": 2.25 }, + { "label": "K70 (F7,C7)", "x": 2.25, "y": 3 }, + { "label": "K61 (F6,C6)", "x": 3.25, "y": 3 }, + { "label": "K71 (F7,C6)", "x": 4.25, "y": 3 }, + { "label": "K62 (F6,B6)", "x": 5.25, "y": 3 }, + { "label": "K72 (F7,B6)", "x": 6.25, "y": 3 }, + { "label": "K63 (F6,B5)", "x": 7.25, "y": 3 }, + { "label": "K73 (F7,B5)", "x": 8.25, "y": 3 }, + { "label": "K64 (F6,B4)", "x": 9.25, "y": 3 }, + { "label": "K74 (F7,B4)", "x": 10.25, "y": 3 }, + { "label": "K65 (F6,D7)", "x": 11.25, "y": 3 }, + { "label": "K75 (F7,D7)", "x": 12.25, "y": 3, "w": 1.75 }, + { "label": "K77 (F7,D3)", "x": 14, "y": 3 }, + { "label": "K67 (F6,D3)", "x": 15, "y": 3 }, + { "label": "K80 (F5,C7)", "x": 0, "y": 4, "w": 1.25 }, + { "label": "K90 (F4,C7)", "x": 1.25, "y": 4, "w": 1.25 }, + { "label": "K81 (F5,C6)", "x": 2.5, "y": 4, "w": 1.25 }, + { "label": "K92 (F4,B6)", "x": 3.75, "y": 4, "w": 6.25 }, + { "label": "K94 (F4,B4)", "x": 10, "y": 4, "w": 1.25 }, + { "label": "K85 (F5,D7)", "x": 11.25, "y": 4, "w": 1.25 }, + { "label": "K95 (F4,D7)", "x": 13, "y": 4 }, + { "label": "K97 (F4,D3)", "x": 14, "y": 4 }, + { "label": "K87 (F5,D3)", "x": 15, "y": 4 } + ] + }, + "LAYOUT_65_ansi_blocker_split_bs": { + "layout": [ + { "label": "K00 (B1,C7)", "x": 0, "y": 0 }, + { "label": "K10 (B2,C7)", "x": 1, "y": 0 }, + { "label": "K01 (B1,C6)", "x": 2, "y": 0 }, + { "label": "K11 (B2,C6)", "x": 3, "y": 0 }, + { "label": "K02 (B1,B6)", "x": 4, "y": 0 }, + { "label": "K12 (B2,B6)", "x": 5, "y": 0 }, + { "label": "K03 (B1,B5)", "x": 6, "y": 0 }, + { "label": "K13 (B2,B5)", "x": 7, "y": 0 }, + { "label": "K04 (B1,B4)", "x": 8, "y": 0 }, + { "label": "K14 (B2,B4)", "x": 9, "y": 0 }, + { "label": "K05 (B1,D7)", "x": 10, "y": 0 }, + { "label": "K15 (B2,D7)", "x": 11, "y": 0 }, + { "label": "K06 (B1,D5)", "x": 12, "y": 0 }, + { "label": "K26 (D1,D5)", "x": 13, "y": 0 }, + { "label": "K17 (B2,D3)", "x": 14, "y": 0 }, + { "label": "K07 (B1,D3)", "x": 15, "y": 0 }, + { "label": "K20 (D1,C7)", "x": 0, "y": 1, "w": 1.5 }, + { "label": "K30 (D2,C7)", "x": 1.5, "y": 1 }, + { "label": "K21 (D1,C6)", "x": 2.5, "y": 1 }, + { "label": "K31 (D2,C6)", "x": 3.5, "y": 1 }, + { "label": "K22 (D1,B6)", "x": 4.5, "y": 1 }, + { "label": "K32 (D2,B6)", "x": 5.5, "y": 1 }, + { "label": "K23 (D1,B5)", "x": 6.5, "y": 1 }, + { "label": "K33 (D2,B5)", "x": 7.5, "y": 1 }, + { "label": "K24 (D1,B4)", "x": 8.5, "y": 1 }, + { "label": "K34 (D2,B4)", "x": 9.5, "y": 1 }, + { "label": "K25 (D1,D7)", "x": 10.5, "y": 1 }, + { "label": "K35 (D2,D7)", "x": 11.5, "y": 1 }, + { "label": "K36 (D2,D5)", "x": 12.5, "y": 1 }, + { "label": "K46 (D4,D5)", "x": 13.5, "y": 1, "w": 1.5 }, + { "label": "K37 (D2,D3)", "x": 15, "y": 1 }, + { "label": "K40 (D4,C7)", "x": 0, "y": 2, "w": 1.75 }, + { "label": "K50 (D6,C7)", "x": 1.75, "y": 2 }, + { "label": "K41 (D4,C6)", "x": 2.75, "y": 2 }, + { "label": "K51 (D6,C6)", "x": 3.75, "y": 2 }, + { "label": "K42 (D4,B6)", "x": 4.75, "y": 2 }, + { "label": "K52 (D6,B6)", "x": 5.75, "y": 2 }, + { "label": "K43 (D4,B5)", "x": 6.75, "y": 2 }, + { "label": "K53 (D6,B5)", "x": 7.75, "y": 2 }, + { "label": "K44 (D4,B4)", "x": 8.75, "y": 2 }, + { "label": "K54 (D6,B4)", "x": 9.75, "y": 2 }, + { "label": "K45 (D4,D7)", "x": 10.75, "y": 2 }, + { "label": "K55 (D6,D7)", "x": 11.75, "y": 2 }, + { "label": "K47 (D4,D3)", "x": 12.75, "y": 2, "w": 2.25 }, + { "label": "K57 (D6,D3)", "x": 15, "y": 2 }, + { "label": "K60 (F6,C7)", "x": 0, "y": 3, "w": 2.25 }, + { "label": "K70 (F7,C7)", "x": 2.25, "y": 3 }, + { "label": "K61 (F6,C6)", "x": 3.25, "y": 3 }, + { "label": "K71 (F7,C6)", "x": 4.25, "y": 3 }, + { "label": "K62 (F6,B6)", "x": 5.25, "y": 3 }, + { "label": "K72 (F7,B6)", "x": 6.25, "y": 3 }, + { "label": "K63 (F6,B5)", "x": 7.25, "y": 3 }, + { "label": "K73 (F7,B5)", "x": 8.25, "y": 3 }, + { "label": "K64 (F6,B4)", "x": 9.25, "y": 3 }, + { "label": "K74 (F7,B4)", "x": 10.25, "y": 3 }, + { "label": "K65 (F6,D7)", "x": 11.25, "y": 3 }, + { "label": "K75 (F7,D7)", "x": 12.25, "y": 3, "w": 1.75 }, + { "label": "K77 (F7,D3)", "x": 14, "y": 3 }, + { "label": "K67 (F6,D3)", "x": 15, "y": 3 }, + { "label": "K80 (F5,C7)", "x": 0, "y": 4, "w": 1.25 }, + { "label": "K90 (F4,C7)", "x": 1.25, "y": 4, "w": 1.25 }, + { "label": "K81 (F5,C6)", "x": 2.5, "y": 4, "w": 1.25 }, + { "label": "K92 (F4,B6)", "x": 3.75, "y": 4, "w": 6.25 }, + { "label": "K94 (F4,B4)", "x": 10, "y": 4, "w": 1.25 }, + { "label": "K85 (F5,D7)", "x": 11.25, "y": 4, "w": 1.25 }, + { "label": "K95 (F4,D7)", "x": 13, "y": 4 }, + { "label": "K97 (F4,D3)", "x": 14, "y": 4 }, + { "label": "K87 (F5,D3)", "x": 15, "y": 4 } + ] + } + } +} diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker/keymap.c b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker/keymap.c new file mode 100644 index 0000000000..99c42be954 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker/keymap.c @@ -0,0 +1,39 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + + [0] = LAYOUT_65_ansi_blocker( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_SPC, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT_65_ansi_blocker( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + +}; + diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker/readme.md b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker/readme.md new file mode 100644 index 0000000000..181cc9a013 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker/readme.md @@ -0,0 +1 @@ +# The keymap for krush65 solder layout ansi blocker \ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_all/keymap.c b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_all/keymap.c new file mode 100644 index 0000000000..b2019e5ec8 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_all/keymap.c @@ -0,0 +1,38 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + + [0] = LAYOUT_65_ansi_blocker_split_bs_sp( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, KC_PSCR, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_LALT, KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT_65_ansi_blocker_split_bs_sp( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + +}; diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_all/readme.md b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_all/readme.md new file mode 100644 index 0000000000..b6d1da89aa --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_all/readme.md @@ -0,0 +1 @@ +# The keymap for krush65 solder layout ansi blocker with split backspace and split spacebar \ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_bs/keymap.c b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_bs/keymap.c new file mode 100644 index 0000000000..6cd8dd4baf --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_bs/keymap.c @@ -0,0 +1,39 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + + + [0] = LAYOUT_65_ansi_blocker_split_bs( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, KC_PSCR, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT_65_ansi_blocker_split_bs( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + +}; diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_bs/readme.md b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_bs/readme.md new file mode 100644 index 0000000000..162da7a903 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/ansi_blocker_split_bs/readme.md @@ -0,0 +1 @@ +# The keymap for krush65 solder layout ansi blocker with split backspace \ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/default/keymap.c b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/default/keymap.c new file mode 100644 index 0000000000..eecb1e5f8f --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/default/keymap.c @@ -0,0 +1,39 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + + [0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, KC_PSCR, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_LALT, KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT_all( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + +}; + diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/default/readme.md b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/default/readme.md new file mode 100644 index 0000000000..1f98b857ce --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for krush65 solder \ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/sawns/keymap.c b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/sawns/keymap.c new file mode 100644 index 0000000000..3a7fa10cfa --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/sawns/keymap.c @@ -0,0 +1,75 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + + +#include QMK_KEYBOARD_H +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, KC_PSCR, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_LALT, KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT_all( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), +}; + + +bool encoder_update_user(uint8_t index, bool clockwise) { + if (index == 0) { + switch (get_highest_layer(layer_state)) { + case 0: + // main layer - move mouse right (CW) and left (CCW) + if (clockwise) { + tap_code_delay(KC_VOLU, 10); + } else { + tap_code_delay(KC_VOLD, 10); + } + break; + default: + // other layers - =/+ (quals/plus) (CW) and -/_ (minus/underscore) (CCW) + if (clockwise) { + tap_code16(C(KC_EQL)); + } else { + tap_code16(C(KC_MINS)); + } + break; + } + } + return false; +} \ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/sawns/readme.md b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/sawns/readme.md new file mode 100644 index 0000000000..ff710c521f --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/sawns/readme.md @@ -0,0 +1 @@ +#custom keymap for MikeTheSan \ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/sawns/rules.mk b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/sawns/rules.mk new file mode 100644 index 0000000000..036bd6d1c3 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/sawns/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes \ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/via/keymap.c b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/via/keymap.c new file mode 100644 index 0000000000..8036529c91 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/via/keymap.c @@ -0,0 +1,51 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + + [0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, KC_PSCR, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_LALT, KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT_all( + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), +}; diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/via/readme.md b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/via/readme.md new file mode 100644 index 0000000000..2c88050060 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/via/readme.md @@ -0,0 +1 @@ +# The VIA keymap for krush65 solder \ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/via/rules.mk b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/via/rules.mk new file mode 100644 index 0000000000..036bd6d1c3 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes \ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/solder/readme.md b/keyboards/sawnsprojects/krush/krush65/solder/readme.md new file mode 100644 index 0000000000..27af715eda --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/readme.md @@ -0,0 +1,15 @@ +# Krush65 solder + +![Krush65](https://cdn.shopify.com/s/files/1/0299/9497/5365/files/4_-_2BS9fH2_2048x2048.jpg) + +A 65% keyboard PCB made and sold by SawnsProjects with Nuxros in [mechkey.store](https://mechkey.store/blogs/store-updates/introducing-krush-65). + +* Keyboard Maintainer: [Mai The San](https://github.com/MaiTheSan) +* Hardware Supported: Krush65 +* Hardware Availability: [Facebook](https://www.facebook.com/groups/vnmkmarket/posts/1410794482649627) + +Make example for this keyboard (after setting up your build environment): + + make sawnsprojects/krush65/solder:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). \ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/solder/rules.mk b/keyboards/sawnsprojects/krush/krush65/solder/rules.mk new file mode 100644 index 0000000000..1adb996504 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/rules.mk @@ -0,0 +1,23 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +ENCODER_ENABLE = yes + +LAYOUTS = 65_ansi_blocker 65_ansi_blocker_split_bs \ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/solder/solder.c b/keyboards/sawnsprojects/krush/krush65/solder/solder.c new file mode 100644 index 0000000000..b8a7729725 --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/solder.c @@ -0,0 +1,53 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "solder.h" +#include "encoder_actions.h" + + /* Custom encoder control - handles CW/CCW turning of encoder + * Default behavior: + * main layer: + * CW: move mouse right + * CCW: move mouse left + * other layers: + * CW: = (equals/plus - increase slider in Adobe products) + * CCW: - (minus/underscore - decrease slider in adobe products) + */ +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + if (index == 0) { + switch (get_highest_layer(layer_state)) { + + case 0: + // main layer - move mouse right (CW) and left (CCW) + if (clockwise) { + tap_code_delay(KC_VOLU, 10); + } else { + tap_code_delay(KC_VOLD, 10); + } + break; + default: + // other layers - =/+ (quals/plus) (CW) and -/_ (minus/underscore) (CCW) + if (clockwise) { + tap_code16(C(KC_EQL)); + } else { + tap_code16(C(KC_MINS)); + } + break; + } + } + return true; +} \ No newline at end of file diff --git a/keyboards/sawnsprojects/krush/krush65/solder/solder.h b/keyboards/sawnsprojects/krush/krush65/solder/solder.h new file mode 100644 index 0000000000..58f6bed57b --- /dev/null +++ b/keyboards/sawnsprojects/krush/krush65/solder/solder.h @@ -0,0 +1,93 @@ +/* Copyright 2021 SawnsProjects + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +#define LAYOUT_all( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, K07, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, K37, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, K57, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K77, K67, \ + K80, K90, K81, K82, K92, K93, K94, K85, K95, K97, K87 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07 }, \ + { K10, K11, K12, K13, K14, K15, KC_NO, K17 }, \ + { K20, K21, K22, K23, K24, K25, K26, KC_NO }, \ + { K30, K31, K32, K33, K34, K35, K36, K37 }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, KC_NO, K57 }, \ + { K60, K61, K62, K63, K64, K65, KC_NO, K67 }, \ + { K70, K71, K72, K73, K74, K75, KC_NO, K77 }, \ + { K80, K81, K82, KC_NO, KC_NO, K85, KC_NO, K87 }, \ + { K90, KC_NO, K92, K93, K94, K95, KC_NO, K97 }, \ +} +#define LAYOUT_65_ansi_blocker( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K07, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, K37, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, K57, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K77, K67, \ + K80, K90, K81, K92, K94, K85, K95, K97, K87 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07 }, \ + { K10, K11, K12, K13, K14, K15, KC_NO, KC_NO }, \ + { K20, K21, K22, K23, K24, K25, K26, KC_NO }, \ + { K30, K31, K32, K33, K34, K35, K36, K37 }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, KC_NO, K57 }, \ + { K60, K61, K62, K63, K64, K65, KC_NO, K67 }, \ + { K70, K71, K72, K73, K74, K75, KC_NO, K77 }, \ + { K80, K81, KC_NO, KC_NO, KC_NO, K85, KC_NO, K87 }, \ + { K90, KC_NO, K92, KC_NO, K94, K95, KC_NO, K97 }, \ +} +#define LAYOUT_65_ansi_blocker_split_bs( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, K07, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, K37, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, K57, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K77, K67, \ + K80, K90, K81, K92, K94, K85, K95, K97, K87 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07 }, \ + { K10, K11, K12, K13, K14, K15, KC_NO, K17 }, \ + { K20, K21, K22, K23, K24, K25, K26, KC_NO }, \ + { K30, K31, K32, K33, K34, K35, K36, K37 }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, KC_NO, K57 }, \ + { K60, K61, K62, K63, K64, K65, KC_NO, K67 }, \ + { K70, K71, K72, K73, K74, K75, KC_NO, K77 }, \ + { K80, K81, KC_NO, KC_NO, KC_NO, K85, KC_NO, K87 }, \ + { K90, KC_NO, K92, KC_NO, K94, K95, KC_NO, K97 }, \ +} +#define LAYOUT_65_ansi_blocker_split_bs_sp( \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K26, K17, K07, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K36, K46, K37, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K47, K57, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K77, K67, \ + K80, K90, K81, K82, K92, K93, K94, K85, K95, K97, K87 \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07 }, \ + { K10, K11, K12, K13, K14, K15, KC_NO, K17 }, \ + { K20, K21, K22, K23, K24, K25, K26, KC_NO }, \ + { K30, K31, K32, K33, K34, K35, K36, K37 }, \ + { K40, K41, K42, K43, K44, K45, K46, K47 }, \ + { K50, K51, K52, K53, K54, K55, KC_NO, K57 }, \ + { K60, K61, K62, K63, K64, K65, KC_NO, K67 }, \ + { K70, K71, K72, K73, K74, K75, KC_NO, K77 }, \ + { K80, K81, K82, KC_NO, KC_NO, K85, KC_NO, K87 }, \ + { K90, KC_NO, K92, K93, K94, K95, KC_NO, K97 }, \ +} + From 48eddeeea401a4ebaff8590137da01b594ba6909 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Gustavs=20G=C5=ABtmanis?= Date: Thu, 11 Nov 2021 06:31:39 +0200 Subject: [PATCH 463/595] [Keymap] Adding keymap for BDN9 and Planck (#15067) --- .../keebio/bdn9/keymaps/copface/config.h | 8 ++ .../keebio/bdn9/keymaps/copface/keymap.c | 93 +++++++++++++++++++ keyboards/planck/keymaps/copface/keymap.c | 14 ++- 3 files changed, 114 insertions(+), 1 deletion(-) create mode 100644 keyboards/keebio/bdn9/keymaps/copface/config.h create mode 100644 keyboards/keebio/bdn9/keymaps/copface/keymap.c diff --git a/keyboards/keebio/bdn9/keymaps/copface/config.h b/keyboards/keebio/bdn9/keymaps/copface/config.h new file mode 100644 index 0000000000..38881a2108 --- /dev/null +++ b/keyboards/keebio/bdn9/keymaps/copface/config.h @@ -0,0 +1,8 @@ +// Copyright 2021 Gustavs Gutmanis (@gustavs-gutmanis) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#ifdef RGB_MATRIX_ENABLE +# define RGB_MATRIX_KEYPRESSES +#endif diff --git a/keyboards/keebio/bdn9/keymaps/copface/keymap.c b/keyboards/keebio/bdn9/keymaps/copface/keymap.c new file mode 100644 index 0000000000..c086faa1aa --- /dev/null +++ b/keyboards/keebio/bdn9/keymaps/copface/keymap.c @@ -0,0 +1,93 @@ +// Copyright 2021 Gustavs Gutmanis (@gustavs-gutmanis) +// SPDX-License-Identifier: GPL-2.0-or-later + +#include QMK_KEYBOARD_H + +enum layer_names { + _SMITE = 0, +}; + +enum custom_keycodes { + S_7 = SAFE_RANGE, // [VEL] - laugh + S_8, // [VVN] - No + S_9, // [VVA] - OK + + S_4, // [VVB] - be right back + S_5, // [VVVE] - on my way + S_6, // [VVM] - out of mana + + S_1, // [VRR] - retreat + S_2, // [VDD] - defend + S_3, // [VAA] - attack +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case S_7: + if (record->event.pressed) { + // VEL + SEND_STRING("v" SS_DELAY(20) "e" SS_DELAY(20) "l"); + } + break; + case S_8: + if (record->event.pressed) { + // VVN + SEND_STRING("v" SS_DELAY(20) "v" SS_DELAY(20) "n"); + } + break; + case S_9: + if (record->event.pressed) { + // VVA + SEND_STRING("v" SS_DELAY(20) "v" SS_DELAY(20) "a"); + } + break; + + case S_4: + if (record->event.pressed) { + // VVB + SEND_STRING("v" SS_DELAY(20) "v" SS_DELAY(20) "b"); + } + break; + case S_5: + if (record->event.pressed) { + // VVVE + SEND_STRING("v" SS_DELAY(20) "v" SS_DELAY(20) "v" SS_DELAY(20) "e"); + } + break; + case S_6: + if (record->event.pressed) { + // VVM + SEND_STRING("v" SS_DELAY(20) "v" SS_DELAY(20) "m"); + } + break; + + case S_1: + if (record->event.pressed) { + // VRR + SEND_STRING("v" SS_DELAY(20) "r" SS_DELAY(20) "r"); + } + break; + case S_2: + if (record->event.pressed) { + // VDD + SEND_STRING("v" SS_DELAY(20) "d" SS_DELAY(20) "d"); + } + break; + case S_3: + if (record->event.pressed) { + // VAA + SEND_STRING("v" SS_DELAY(20) "a" SS_DELAY(20) "a"); + } + break; + } + + return true; +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_SMITE] = LAYOUT( + S_7, S_8, S_9, + S_4, S_5, S_6, + S_1, S_2, S_3 + ), +}; diff --git a/keyboards/planck/keymaps/copface/keymap.c b/keyboards/planck/keymaps/copface/keymap.c index 0754a0c742..b448d9c7dd 100644 --- a/keyboards/planck/keymaps/copface/keymap.c +++ b/keyboards/planck/keymaps/copface/keymap.c @@ -85,7 +85,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_META] = LAYOUT_planck_grid( XXXXXXX, KC_F1, KC_F2, KC_F3, KC_F4, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SRC, XXXXXXX, - XXXXXXX, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + KC_CAPS, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_F10, KC_F11, KC_F12, HK_AF9, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX ), @@ -167,6 +167,10 @@ void matrix_scan_user(void) { SEQ_ONE_KEY(KC_S) { tap_code16(G(C(S(KC_4)))); } + // Record Screen + SEQ_TWO_KEYS(KC_S, KC_S) { + tap_code16(S(G(KC_5))); + } // 1Pass browser SEQ_ONE_KEY(KC_A) { tap_code16(G(A(KC_BSLS))); @@ -187,5 +191,13 @@ void matrix_scan_user(void) { SEQ_ONE_KEY(KC_ENT) { tap_code16(S(G(A(KC_F)))); } + // Focus file tree + SEQ_ONE_KEY(KC_TAB) { + tap_code16(G(KC_1)); + } + // Caps-lock + SEQ_TWO_KEYS(KC_TAB, KC_TAB) { + tap_code16(KC_CAPS); + } } } From c48e9f9e77a8f8c722957ef306280014b098758d Mon Sep 17 00:00:00 2001 From: HellTM Date: Thu, 11 Nov 2021 04:32:31 +0000 Subject: [PATCH 464/595] [Keyboard] Lime by HellTM (#14710) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- keyboards/lime/config.h | 20 + keyboards/lime/keymaps/default/config.h | 22 + keyboards/lime/keymaps/default/keymap.c | 713 +++++++++++++++++++++++ keyboards/lime/keymaps/default/readme.md | 52 ++ keyboards/lime/keymaps/default/rules.mk | 7 + keyboards/lime/lib/glcdfont.c | 232 ++++++++ keyboards/lime/lime.c | 46 ++ keyboards/lime/lime.h | 21 + keyboards/lime/readme.md | 30 + keyboards/lime/rev1/config.h | 68 +++ keyboards/lime/rev1/info.json | 25 + keyboards/lime/rev1/rev1.c | 38 ++ keyboards/lime/rev1/rev1.h | 41 ++ keyboards/lime/rev1/rules.mk | 4 + keyboards/lime/rules.mk | 24 + 15 files changed, 1343 insertions(+) create mode 100644 keyboards/lime/config.h create mode 100644 keyboards/lime/keymaps/default/config.h create mode 100644 keyboards/lime/keymaps/default/keymap.c create mode 100644 keyboards/lime/keymaps/default/readme.md create mode 100644 keyboards/lime/keymaps/default/rules.mk create mode 100644 keyboards/lime/lib/glcdfont.c create mode 100644 keyboards/lime/lime.c create mode 100644 keyboards/lime/lime.h create mode 100644 keyboards/lime/readme.md create mode 100644 keyboards/lime/rev1/config.h create mode 100644 keyboards/lime/rev1/info.json create mode 100644 keyboards/lime/rev1/rev1.c create mode 100644 keyboards/lime/rev1/rev1.h create mode 100644 keyboards/lime/rev1/rules.mk create mode 100644 keyboards/lime/rules.mk diff --git a/keyboards/lime/config.h b/keyboards/lime/config.h new file mode 100644 index 0000000000..22d4f632d0 --- /dev/null +++ b/keyboards/lime/config.h @@ -0,0 +1,20 @@ +/* Copyright 2021 HellSingCoder + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "config_common.h" + diff --git a/keyboards/lime/keymaps/default/config.h b/keyboards/lime/keymaps/default/config.h new file mode 100644 index 0000000000..f19e259232 --- /dev/null +++ b/keyboards/lime/keymaps/default/config.h @@ -0,0 +1,22 @@ + /* Copyright 2021 HellSingCoder + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + + +#pragma once + +#define OLED_TIMEOUT 120000 +#define OLED_BRIGHTNESS 120 +#define OLED_FONT_H "keyboards/lime/lib/glcdfont.c" diff --git a/keyboards/lime/keymaps/default/keymap.c b/keyboards/lime/keymaps/default/keymap.c new file mode 100644 index 0000000000..f6c711597d --- /dev/null +++ b/keyboards/lime/keymaps/default/keymap.c @@ -0,0 +1,713 @@ + /* Copyright 2021 HellSingCoder + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +#ifdef JOYSTICK_ENABLE +# include "joystick.h" +# include "analog.h" +#endif + +enum lime_layers { + /* _M_XYZ = Mac Os, _W_XYZ = Win/Linux */ + _QWERTY, + _COLEMAK, + _LOWER, + _RAISE, + _ADJUST, +}; + +enum custom_keycodes { + KC_QWERTY = SAFE_RANGE, + KC_COLEMAK, + KC_LOWER, + KC_RAISE, + KC_ADJUST, + KC_PRVWD, + KC_NXTWD, + KC_LSTRT, + KC_LEND, + KC_DLINE, + KC_BSPC_DEL, + KC_THUMB_SWAP, + KC_THUMB_LEFT, + KC_THUMB_RIGHT, + KC_JOYSTICK_DEBUG, +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* + * QWERTY + * ,-----------------------------------------. ,-----------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | BS | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Tab | Q | W | E | R | T | | Y | U | I | O | P | ` | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Caps | A | S | D | F | G |-------. ,-------| H | J | K | L | ; | ' | + * |------+------+------+------+------+------| | | Mute |------+------+------+------+------+------| + * |LShift| Z | X | C | V | B |-------| |-------| N | M | , | . | / | \ | + * `-----------------------------------------/ / \ \-----------------------------------------' + * |Lower | LGUI | LAlt | DEL | LCTR | /Enter / \Space \ |Raise | [ | ] | - | = | + * | | | | | |/ / \ \ | | | | | | + * `----------------------------------------' '------''----------------------------------' + */ + +[_QWERTY] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_GRV, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, XXXXXXX, KC_MUTE, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, + KC_LOWER, KC_LGUI,KC_LALT,KC_DEL, KC_LCTRL, KC_THUMB_LEFT, KC_THUMB_RIGHT, KC_RAISE, KC_LBRC, KC_RBRC, KC_MINS, KC_EQL +), + +/* + * COLEMAK + * ,-----------------------------------------. ,-----------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | BS | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Tab | Q | W | F | P | G | | J | L | U | Y | ; | ` | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Caps | A | R | S | T | D |-------. ,-------| H | N | E | I | O | ' | + * |------+------+------+------+------+------| | | Mute |------+------+------+------+------+------| + * |LShift| Z | X | C | V | B |-------| |-------| K | M | , | . | / | \ | + * `-----------------------------------------/ / \ \-----------------------------------------' + * |Lower | LGUI | LAlt | DEL | LCTR | /Enter / \Space \ |Raise | [ | ] | - | = | + * | | | | | |/ / \ \ | | | | | | + * `----------------------------------------' '------''----------------------------------' + */ + +[_COLEMAK] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC_DEL, + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_GRV, + KC_CAPS, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, XXXXXXX, KC_MUTE, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, + KC_LOWER, KC_LGUI,KC_LALT,KC_DEL, KC_LCTRL, KC_THUMB_LEFT, KC_THUMB_RIGHT, KC_RAISE, KC_LBRC, KC_RBRC, KC_MINS, KC_EQL +), + +/* RAISE + * ,-----------------------------------------. ,-----------------------------------------. + * | Esc | | | | | | | | | | | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Tab | Ins | Pscr | Menu | | | | | PWrd | Up | NWrd | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Caps | LAt | LCtl |LShift| | |-------. ,-------| | Left | Down | Rigth| | | + * |------+------+------+------+------+------| | | Mute |------+------+------+------+------+------| + * |LShift| | | | | |-------| |-------| | LStr | DLine| LEnd | | | + * `-----------------------------------------/ / \ \-----------------------------------------' + * |Lower | LGUI | LAlt | DEL | LCTR | /Enter / \Space \ |Raise | | | | | + * | | | | | |/ / \ \ | | | | | | + * `----------------------------------------' '------''----------------------------------' + */ +[_RAISE] = LAYOUT( + _______, _______ , _______ , _______ , _______ , _______, _______, _______ , _______ , _______ , _______ , _______, + _______, KC_INS, KC_PSCR, KC_APP, XXXXXXX, XXXXXXX, KC_PGUP, KC_PRVWD, KC_UP, KC_NXTWD, XXXXXXX, XXXXXXX, + _______, KC_LALT, KC_LCTL, KC_LSFT, XXXXXXX, XXXXXXX, KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX, XXXXXXX, + _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, _______, XXXXXXX, KC_LSTRT, KC_DLINE, KC_LEND, XXXXXXX, XXXXXXX, + _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX +), + +/* LOWER + * ,-----------------------------------------. ,-----------------------------------------. + * | Esc | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | F11 | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Tab | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | F12 | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | Caps | ! | @ | # | $ | % |-------. ,-------| ^ | & | * | ( | ) | | | + * |------+------+------+------+------+------| | | Mute |------+------+------+------+------+------| + * |LShift| = | - | + | { | } |-------| |-------| [ | ] | ; | : | \ | ` | + * `-----------------------------------------/ / \ \-----------------------------------------' + * |Lower | LGUI | LAlt | DEL | LCTR | /Enter / \Space \ |Raise | | | | | + * | | | | | |/ / \ \ | | | | | | + * `----------------------------------------' '------''----------------------------------' + */ +[_LOWER] = LAYOUT( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + _______, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_F12, + _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_PIPE, + _______, KC_EQL, KC_MINS, KC_PLUS, KC_LCBR, KC_RCBR, _______, _______, KC_LBRC, KC_RBRC, KC_SCLN, KC_COLN, KC_BSLS, KC_GRV, + _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX +), + +/* ADJUST + * ,-----------------------------------------. ,-----------------------------------------. + * | RESET| | | | | | | | | | | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | |QWERTY| | | | | | | | | | | | + * |------+------+------+------+------+------| |------+------+------+------+------+------| + * | | | |JDEBUG| | |-------. ,-------| | VOLDO| MUTE | VOLUP| | | + * |------+------+------+------+------+------| | | Mute |------+------+------+------+------+------| + * | | | |COLEMA| | |-------| |-------| | PREV | PLAY | NEXT | | | + * `-----------------------------------------/ / \ \-----------------------------------------' + * |Lower |MACWIN| | | | / Swap / \ \ |Raise | | | | | + * | | | | | |/ / \ \ | | | | | | + * `----------------------------------------' '------''----------------------------------' + */ + [_ADJUST] = LAYOUT( + RESET, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, KC_QWERTY, XXXXXXX, XXXXXXX, CG_TOGG, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, KC_JOYSTICK_DEBUG,XXXXXXX, XXXXXXX, XXXXXXX, KC_VOLD, KC_MUTE, KC_VOLU, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, KC_COLEMAK, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, KC_MPRV, KC_MPLY, KC_MNXT, XXXXXXX, XXXXXXX, + _______, CG_TOGG, XXXXXXX, XXXXXXX, XXXXXXX, KC_THUMB_SWAP, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX + ) +}; + +#ifdef JOYSTICK_ENABLE + /* Joystick pins */ +# ifndef JOYSTICK_X_PIN +# define JOYSTICK_X_PIN F5 +# define JOYSTICK_Y_PIN F4 +# endif + + /* Joystick + Encoder fix */ + void keyboard_post_init_kb(void) { + if (is_keyboard_master()) { + writePinLow(JOYSTICK_X_PIN); + writePinLow(JOYSTICK_Y_PIN); + } + } + + /* Joystick axes settings */ + joystick_config_t joystick_axes[JOYSTICK_AXES_COUNT] = { + [0] = JOYSTICK_AXIS_IN(JOYSTICK_X_PIN, 268, 514, 813), + [1] = JOYSTICK_AXIS_IN(JOYSTICK_Y_PIN, 865, 519, 260) + }; +#endif + +/* Joystick Debug */ +bool joystick_debug = false; + +/* Space Enter swap */ +bool swap_space_enter = false; + +/* Smart Backspace Delete */ +bool shift_held = false; +static uint16_t held_shift = 0; + +/* keyboard pet jump status variables */ +bool isJumping = false; +bool showedJump = true; + +#ifdef OLED_ENABLE + /* Keyboard logo (from gdlcfont.c) */ + static void render_logo(void) { + static const char PROGMEM lime_logo[] = { + 0x80, 0x81, 0x82, 0x83, 0x84, + 0xA0, 0xA1, 0xA2, 0xA3, 0xA4, + 0xC0, 0xC1, 0xC2, 0xC3, 0xC4, 0 + }; + + oled_write_P(lime_logo, false); + } + + /* Keyboard Pet settings */ + #define MIN_WALK_SPEED 10 + #define MIN_RUN_SPEED 50 + #define ANIM_FRAME_DURATION 200 // how long each frame lasts in ms + #define ANIM_SIZE 96 // number of bytes per image + + /* Keyboard Pet status variables */ + led_t led_usb_state; + uint8_t current_wpm = 0; + uint8_t current_frame = 0; + uint32_t anim_timer = 0; + uint32_t anim_sleep = 0; + + /* Keyboard Pet logic */ + static void render_keyboard_pet(int KEYBOARD_PET_X, int KEYBOARD_PET_Y) { + + /* Sit */ + static const char PROGMEM sit[2][ANIM_SIZE] = { + { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x1c, + 0x02, 0x05, 0x02, 0x24, 0x04, 0x04, 0x02, 0xa9, 0x1e, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x10, 0x08, 0x68, 0x10, 0x08, 0x04, 0x03, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x06, 0x82, 0x7c, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x04, 0x0c, 0x10, 0x10, 0x20, 0x20, 0x20, 0x28, + 0x3e, 0x1c, 0x20, 0x20, 0x3e, 0x0f, 0x11, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 + }, + { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x1c, + 0x02, 0x05, 0x02, 0x24, 0x04, 0x04, 0x02, 0xa9, 0x1e, 0xe0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0xe0, 0x90, 0x08, 0x18, 0x60, 0x10, 0x08, 0x04, 0x03, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x0e, 0x82, 0x7c, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x04, 0x0c, 0x10, 0x10, 0x20, 0x20, 0x20, 0x28, + 0x3e, 0x1c, 0x20, 0x20, 0x3e, 0x0f, 0x11, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 + } + }; + + /* Walk */ + static const char PROGMEM walk[2][ANIM_SIZE] = { + { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x40, 0x20, 0x10, 0x90, 0x90, 0x90, 0xa0, 0xc0, 0x80, 0x80, + 0x80, 0x70, 0x08, 0x14, 0x08, 0x90, 0x10, 0x10, 0x08, 0xa4, 0x78, 0x80, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x07, 0x08, 0xfc, 0x01, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, + 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x18, 0xea, 0x10, 0x0f, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x1c, 0x20, 0x20, 0x3c, 0x0f, 0x11, 0x1f, 0x03, + 0x06, 0x18, 0x20, 0x20, 0x3c, 0x0c, 0x12, 0x1e, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 + }, + { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x40, 0x20, 0x20, 0x20, 0x40, 0x80, 0x00, 0x00, 0x00, + 0x00, 0xe0, 0x10, 0x28, 0x10, 0x20, 0x20, 0x20, 0x10, 0x48, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x1f, 0x20, 0xf8, 0x02, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, + 0x03, 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x10, 0x30, 0xd5, 0x20, 0x1f, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x20, 0x30, 0x0c, 0x02, 0x05, 0x09, 0x12, 0x1e, + 0x02, 0x1c, 0x14, 0x08, 0x10, 0x20, 0x2c, 0x32, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 + } + }; + + /* Run */ + static const char PROGMEM run[2][ANIM_SIZE] = { + { + 0x00, 0x00, 0x00, 0x00, 0xe0, 0x10, 0x08, 0x08, 0xc8, 0xb0, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80, + 0x80, 0x40, 0x40, 0x3c, 0x14, 0x04, 0x08, 0x90, 0x18, 0x04, 0x08, 0xb0, 0x40, 0x80, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0xc4, 0xa4, 0xfc, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xc8, 0x58, 0x28, 0x2a, 0x10, 0x0f, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x0e, 0x09, 0x04, 0x04, 0x04, 0x04, 0x02, 0x03, 0x02, 0x01, 0x01, + 0x02, 0x02, 0x04, 0x08, 0x10, 0x26, 0x2b, 0x32, 0x04, 0x05, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00 + }, + { + 0x00, 0x00, 0x00, 0xe0, 0x10, 0x10, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, + 0x80, 0x80, 0x78, 0x28, 0x08, 0x10, 0x20, 0x30, 0x08, 0x10, 0x20, 0x40, 0x80, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x03, 0x04, 0x08, 0x10, 0x11, 0xf9, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x10, 0xb0, 0x50, 0x55, 0x20, 0x1f, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x0c, 0x10, 0x20, 0x28, 0x37, + 0x02, 0x1e, 0x20, 0x20, 0x18, 0x0c, 0x14, 0x1e, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 + } + }; + + /* Bark */ + static const char PROGMEM bark[2][ANIM_SIZE] = { + { + 0x00, 0xc0, 0x20, 0x10, 0xd0, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, 0x40, + 0x3c, 0x14, 0x04, 0x08, 0x90, 0x18, 0x04, 0x08, 0xb0, 0x40, 0x80, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x03, 0x04, 0x08, 0x10, 0x11, 0xf9, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x80, 0xc8, 0x48, 0x28, 0x2a, 0x10, 0x0f, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x0c, 0x10, 0x20, 0x28, 0x37, 0x02, 0x02, + 0x04, 0x08, 0x10, 0x26, 0x2b, 0x32, 0x04, 0x05, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 + }, + { + 0x00, 0xe0, 0x10, 0x10, 0xf0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, 0x40, + 0x40, 0x2c, 0x14, 0x04, 0x08, 0x90, 0x18, 0x04, 0x08, 0xb0, 0x40, 0x80, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x03, 0x04, 0x08, 0x10, 0x11, 0xf9, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xc0, 0x48, 0x28, 0x2a, 0x10, 0x0f, 0x20, 0x4a, 0x09, 0x10, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02, 0x0c, 0x10, 0x20, 0x28, 0x37, 0x02, 0x02, + 0x04, 0x08, 0x10, 0x26, 0x2b, 0x32, 0x04, 0x05, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 + } + }; + + /* animation */ + void animate_keyboard_pet(void) { + + /* jump */ + if (isJumping || !showedJump) { + oled_set_cursor(KEYBOARD_PET_X,KEYBOARD_PET_Y +2); + oled_write_P(PSTR(" "), false); + oled_set_cursor(KEYBOARD_PET_X,KEYBOARD_PET_Y -1); + showedJump = true; + } else { + oled_set_cursor(KEYBOARD_PET_X,KEYBOARD_PET_Y -1); + oled_write_P(PSTR(" "), false); + oled_set_cursor(KEYBOARD_PET_X,KEYBOARD_PET_Y); + } + + /* switch frame */ + current_frame = (current_frame + 1) % 2; + + /* current animation status */ + if(led_usb_state.caps_lock) { + oled_write_raw_P(bark[abs(1 - current_frame)], ANIM_SIZE); + } else if(current_wpm <= MIN_WALK_SPEED) { + oled_write_raw_P(sit[abs(1 - current_frame)], ANIM_SIZE); + } else if(current_wpm <= MIN_RUN_SPEED) { + oled_write_raw_P(walk[abs(1 - current_frame)], ANIM_SIZE); + } else { + oled_write_raw_P(run[abs(1 - current_frame)], ANIM_SIZE); + } + } + + /* animation timer */ + if(timer_elapsed32(anim_timer) > ANIM_FRAME_DURATION) { + anim_timer = timer_read32(); + if(timer_elapsed32(anim_sleep) < OLED_TIMEOUT) { + animate_keyboard_pet(); + } + } + + if (current_wpm > 0) { + anim_sleep = timer_read32(); + } else if(timer_elapsed32(anim_sleep) > OLED_TIMEOUT) { + oled_off(); + } + + } + + static void print_logo_narrow(void) { + + /* Keyboard logo */ + render_logo(); + + /* wpm counter */ + char wpm_str[5]; + wpm_str[4] = '\0'; + wpm_str[3] = '0' + current_wpm % 10; + wpm_str[2] = '0' + ( current_wpm /= 10) % 10; + wpm_str[1] = '0' + current_wpm / 10; + wpm_str[0] = ' '; + oled_set_cursor(0,14); + oled_write(wpm_str, false); + oled_write_P(PSTR(" wpm"), false); + } + + static void print_status_narrow(void) { + + /* Print current OS */ + oled_set_cursor(2,0); + if (keymap_config.swap_lctl_lgui) { + oled_write_P(PSTR("\x9E"), false); + } else { + oled_write_P(PSTR("\x9F"), false); + } + + /* Print current layout */ + oled_set_cursor(0,2); + switch (get_highest_layer(default_layer_state)) { + case _QWERTY: + oled_write_P(PSTR("QWRTY"), false); + break; + case _COLEMAK: + oled_write_P(PSTR("COLMK"), false); + break; + default: + oled_write_P(PSTR("UNDEF"), false); + } + + /* Print current layer */ + oled_set_cursor(0,4); + oled_write_P(PSTR("LAYER"), false); + oled_set_cursor(0,5); + switch (get_highest_layer(layer_state)) { + case _QWERTY: + oled_write_P(PSTR("Base "), false); + break; + case _RAISE: + oled_write_P(PSTR("Raise"), false); + break; + case _LOWER: + oled_write_P(PSTR("Lower"), false); + break; + case _ADJUST: + oled_write_P(PSTR("Adj "), false); + break; + default: + oled_write_P(PSTR("Undef"), false); + } + + /* caps lock */ + oled_set_cursor(0,7); + oled_write_P(PSTR("CAPS"), false); + if (led_usb_state.caps_lock) { + oled_write_P(PSTR("\x9A"), false); + } else { + oled_write_P(PSTR("\x99"), false); + } + + /* Space Enter swap */ + oled_set_cursor(0,9); + oled_write_P(PSTR("\x9B"), false); + oled_set_cursor(2,9); + oled_write_P(PSTR("\x9C"), !swap_space_enter); + oled_set_cursor(4,9); + oled_write_P(PSTR("\x9D"), swap_space_enter); + + /* Joystick debugging */ +# ifdef JOYSTICK_ENABLE + if (joystick_debug) { + oled_set_cursor(0,10); + oled_write_P(PSTR("X:"), false); + uint16_t val = analogReadPin(JOYSTICK_X_PIN); + char val_str[3]; + itoa(val, val_str, 10); + oled_write(val_str, false); + oled_set_cursor(0,11); + oled_write_P(PSTR("Y:"), false); + val = analogReadPin(JOYSTICK_Y_PIN); + itoa(val, val_str, 10); + oled_write(val_str, false); + } else { + oled_set_cursor(0,10); + oled_write_P(PSTR(" "), false); + oled_set_cursor(0,11); + oled_write_P(PSTR(" "), false); + } +# endif + + /* Keyboard Pet Render */ + render_keyboard_pet(0,13); + } + + /* vertical screens orientation fix */ + oled_rotation_t oled_init_user(oled_rotation_t rotation) { + return OLED_ROTATION_270; + } + + void oled_task_user(void) { + + /* Keyboard Pet Variables */ + current_wpm = get_current_wpm(); + led_usb_state = host_keyboard_led_state(); + + if (is_keyboard_master()) { + print_status_narrow(); + } else { + print_logo_narrow(); + } + } + +#endif + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case KC_QWERTY: + if (record->event.pressed) { + set_single_persistent_default_layer(_QWERTY); + } + return false; + case KC_COLEMAK: + if (record->event.pressed) { + set_single_persistent_default_layer(_COLEMAK); + } + return false; + case KC_LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + case KC_RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + case KC_ADJUST: + if (record->event.pressed) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + return false; + case KC_PRVWD: + if (record->event.pressed) { + if (keymap_config.swap_lctl_lgui) { + register_mods(mod_config(MOD_LALT)); + register_code(KC_LEFT); + } else { + register_mods(mod_config(MOD_LCTL)); + register_code(KC_LEFT); + } + } else { + if (keymap_config.swap_lctl_lgui) { + unregister_mods(mod_config(MOD_LALT)); + unregister_code(KC_LEFT); + } else { + unregister_mods(mod_config(MOD_LCTL)); + unregister_code(KC_LEFT); + } + } + break; + case KC_NXTWD: + if (record->event.pressed) { + if (keymap_config.swap_lctl_lgui) { + register_mods(mod_config(MOD_LALT)); + register_code(KC_RIGHT); + } else { + register_mods(mod_config(MOD_LCTL)); + register_code(KC_RIGHT); + } + } else { + if (keymap_config.swap_lctl_lgui) { + unregister_mods(mod_config(MOD_LALT)); + unregister_code(KC_RIGHT); + } else { + unregister_mods(mod_config(MOD_LCTL)); + unregister_code(KC_RIGHT); + } + } + break; + case KC_LSTRT: + if (record->event.pressed) { + if (keymap_config.swap_lctl_lgui) { + /* CMD-arrow on Mac, but we have CTL and GUI swapped */ + register_mods(mod_config(MOD_LCTL)); + register_code(KC_LEFT); + } else { + register_code(KC_HOME); + } + } else { + if (keymap_config.swap_lctl_lgui) { + unregister_mods(mod_config(MOD_LCTL)); + unregister_code(KC_LEFT); + } else { + unregister_code(KC_HOME); + } + } + break; + case KC_LEND: + if (record->event.pressed) { + if (keymap_config.swap_lctl_lgui) { + /* CMD-arrow on Mac, but we have CTL and GUI swapped */ + register_mods(mod_config(MOD_LCTL)); + register_code(KC_RIGHT); + } else { + register_code(KC_END); + } + } else { + if (keymap_config.swap_lctl_lgui) { + unregister_mods(mod_config(MOD_LCTL)); + unregister_code(KC_RIGHT); + } else { + unregister_code(KC_END); + } + } + break; + case KC_DLINE: + if (record->event.pressed) { + register_mods(mod_config(MOD_LCTL)); + register_code(KC_BSPC); + } else { + unregister_mods(mod_config(MOD_LCTL)); + unregister_code(KC_BSPC); + } + break; + + case KC_JOYSTICK_DEBUG: + if (record->event.pressed) { + joystick_debug = !joystick_debug; + } + return false; + break; + + /* Space Enter swap */ + case KC_THUMB_SWAP: + if (record->event.pressed) { + swap_space_enter = !swap_space_enter; + } + return false; + break; + case KC_THUMB_LEFT: + if (record->event.pressed) { + if (swap_space_enter) { + register_code(KC_SPC); + + /*Keyboard Pet jump*/ + isJumping = true; + showedJump = false; + } else { + register_code(KC_ENT); + } + } else { + if (swap_space_enter) { + unregister_code(KC_SPC); + + /*Keyboard Pet jump reset*/ + isJumping = false; + } else { + unregister_code(KC_ENT); + } + } + return false; + case KC_THUMB_RIGHT: + if (record->event.pressed) { + if (swap_space_enter) { + register_code(KC_ENT); + } else { + register_code(KC_SPC); + isJumping = true; + showedJump = false; + } + } else { + if (swap_space_enter) { + unregister_code(KC_ENT); + } else { + unregister_code(KC_SPC); + isJumping = false; + } + } + return false; + + /* Smart Backspace Delete */ + case KC_RSFT: + case KC_LSFT: + shift_held = record->event.pressed; + held_shift = keycode; + break; + case KC_BSPC_DEL: + if (record->event.pressed) { + if (shift_held) { + unregister_code(held_shift); + register_code(KC_DEL); + } else { + register_code(KC_BSPC); + } + } else { + unregister_code(KC_DEL); + unregister_code(KC_BSPC); + if (shift_held) { + register_code(held_shift); + } + } + return false; + } + return true; +} + +/* The default rotary encoder code can be found at the bottom of qmk_firmware/keyboards/lime/rev1/rev1.c + * These default settings can be overriden by your own settings in your keymap.c + * For your convenience, here's a copy of those settings so that you can uncomment them if you wish to apply your own modifications. + * DO NOT edit the rev1.c file; instead override the weakly defined default functions by your own. + */ + +/* DELETE THIS LINE TO UNCOMMENT (1/2) + +// Encoders +#ifdef ENCODER_ENABLE + bool encoder_update_user(uint8_t index, bool clockwise) { + + if (index == 0) { + if (clockwise) { + tap_code(KC_MNXT); + } else { + tap_code(KC_MPRV); + } + } else if (index == 1) { + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } + return false; + } +#endif + +#endif +DELETE THIS LINE TO UNCOMMENT (2/2) */ diff --git a/keyboards/lime/keymaps/default/readme.md b/keyboards/lime/keymaps/default/readme.md new file mode 100644 index 0000000000..006be983c7 --- /dev/null +++ b/keyboards/lime/keymaps/default/readme.md @@ -0,0 +1,52 @@ +## Default layout +Joystick on the left side, encoder on the right. No underglow. + +### Base layer +![Base layout for Lime Keyboard](https://github.com/HellSingCoder/LimeKeyboard/blob/main/media/base-layer.png?raw=true) +The layout can be switched for COLEMAK in the settings layer + +### Lower layer +![Lower layout for Lime Keyboard](https://github.com/HellSingCoder/LimeKeyboard/blob/main/media/lower-layer.png?raw=true) + +### Raise layer +![Raise layout for Lime Keyboard](https://github.com/HellSingCoder/LimeKeyboard/blob/main/media/raise-layer.png?raw=true) + +### Settings layer +![Adj layout for Lime Keyboard](https://github.com/HellSingCoder/LimeKeyboard/blob/main/media/adj-layer.png?raw=true) + +This layer can be accessed with the following combination: + +![Adj layout combination for Lime Keyboard](https://github.com/HellSingCoder/LimeKeyboard/blob/main/media/buttons-layer.png?raw=true) + +## Extras + +### Keyboard Pet (Luna) +![Adj layout for Lime Keyboard](https://github.com/HellSingCoder/LimeKeyboard/blob/main/media/luna.gif?raw=true) + +Luna jumps every time you hit Space and will bark at people on the internet if you activate Caps Lock! + +This keyboard pet reacts to your WPM counter: +- under 10 -> sit +- between 10 and 50 -> walk +- over 50 -> run + +### Joystick +The joystick on the left side will act as a controller for games. + +### Shift + Backspace = Delete +This one is pretty self explanatory. + +### Space / Enter swap +The Enter and Space functions can be swapped pressing the left thumb button from the Setting layer. The current mode will be displayed on the left display. This one may be useful to all the gamers out there! + +### OS Switch +Pressing the OS button while on the settings layer will toggle the MAC / WIN mode. This corrects the behaviour of the Alt and Control modifiers. The current selection will be displayed with an icon at the top of the left display. + +### Media Buttons +The right encoder controls the volume and can be pressed to mute. Extra media buttons are hidden away on the settings layer. + +### WPM indicator +Current WPM will be displayed at the bottom of the right screen. + +### Joystick Debug +The JDebug button on the settings layer toggles the ADC readings of the joystick pins for X and Y axis. These will be displayed on the left OLED. diff --git a/keyboards/lime/keymaps/default/rules.mk b/keyboards/lime/keymaps/default/rules.mk new file mode 100644 index 0000000000..cc5b7ac9aa --- /dev/null +++ b/keyboards/lime/keymaps/default/rules.mk @@ -0,0 +1,7 @@ +OLED_ENABLE = yes +ENCODER_ENABLE = yes +JOYSTICK_ENABLE = yes +JOYSTICK_DRIVER = analog +EXTRAKEY_ENABLE = yes +WPM_ENABLE = yes +SRC += analog.c diff --git a/keyboards/lime/lib/glcdfont.c b/keyboards/lime/lib/glcdfont.c new file mode 100644 index 0000000000..bfc2cef1eb --- /dev/null +++ b/keyboards/lime/lib/glcdfont.c @@ -0,0 +1,232 @@ +// This is the 'classic' fixed-space bitmap font for Adafruit_GFX since 1.0. +// See gfxfont.h for newer custom bitmap font info. + +#include "progmem.h" + +// Standard ASCII 5x7 font +const unsigned char font[] PROGMEM = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x3E, 0x5B, 0x4F, 0x5B, 0x3E, 0x00, + 0x3E, 0x6B, 0x4F, 0x6B, 0x3E, 0x00, + 0x1C, 0x3E, 0x7C, 0x3E, 0x1C, 0x00, + 0x18, 0x3C, 0x7E, 0x3C, 0x18, 0x00, + 0x1C, 0x57, 0x7D, 0x57, 0x1C, 0x00, + 0x1C, 0x5E, 0x7F, 0x5E, 0x1C, 0x00, + 0x00, 0x18, 0x3C, 0x18, 0x00, 0x00, + 0xFF, 0xE7, 0xC3, 0xE7, 0xFF, 0x00, + 0x00, 0x18, 0x24, 0x18, 0x00, 0x00, + 0xFF, 0xE7, 0xDB, 0xE7, 0xFF, 0x00, + 0x30, 0x48, 0x3A, 0x06, 0x0E, 0x00, + 0x26, 0x29, 0x79, 0x29, 0x26, 0x00, + 0x40, 0x7F, 0x05, 0x05, 0x07, 0x00, + 0x40, 0x7F, 0x05, 0x25, 0x3F, 0x00, + 0x5A, 0x3C, 0xE7, 0x3C, 0x5A, 0x00, + 0x7F, 0x3E, 0x1C, 0x1C, 0x08, 0x00, + 0x08, 0x1C, 0x1C, 0x3E, 0x7F, 0x00, + 0x14, 0x22, 0x7F, 0x22, 0x14, 0x00, + 0x5F, 0x5F, 0x00, 0x5F, 0x5F, 0x00, + 0x06, 0x09, 0x7F, 0x01, 0x7F, 0x00, + 0x00, 0x66, 0x89, 0x95, 0x6A, 0x00, + 0x60, 0x60, 0x60, 0x60, 0x60, 0x00, + 0x94, 0xA2, 0xFF, 0xA2, 0x94, 0x00, + 0x08, 0x04, 0x7E, 0x04, 0x08, 0x00, + 0x10, 0x20, 0x7E, 0x20, 0x10, 0x00, + 0x08, 0x08, 0x2A, 0x1C, 0x08, 0x00, + 0x08, 0x1C, 0x2A, 0x08, 0x08, 0x00, + 0x1E, 0x10, 0x10, 0x10, 0x10, 0x00, + 0x0C, 0x1E, 0x0C, 0x1E, 0x0C, 0x00, + 0x30, 0x38, 0x3E, 0x38, 0x30, 0x00, + 0x06, 0x0E, 0x3E, 0x0E, 0x06, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x5F, 0x00, 0x00, 0x00, + 0x00, 0x07, 0x00, 0x07, 0x00, 0x00, + 0x14, 0x7F, 0x14, 0x7F, 0x14, 0x00, + 0x24, 0x2A, 0x7F, 0x2A, 0x12, 0x00, + 0x23, 0x13, 0x08, 0x64, 0x62, 0x00, + 0x36, 0x49, 0x56, 0x20, 0x50, 0x00, + 0x00, 0x08, 0x07, 0x03, 0x00, 0x00, + 0x00, 0x1C, 0x22, 0x41, 0x00, 0x00, + 0x00, 0x41, 0x22, 0x1C, 0x00, 0x00, + 0x2A, 0x1C, 0x7F, 0x1C, 0x2A, 0x00, + 0x08, 0x08, 0x3E, 0x08, 0x08, 0x00, + 0x00, 0x80, 0x70, 0x30, 0x00, 0x00, + 0x08, 0x08, 0x08, 0x08, 0x08, 0x00, + 0x00, 0x00, 0x60, 0x60, 0x00, 0x00, + 0x20, 0x10, 0x08, 0x04, 0x02, 0x00, + 0x3E, 0x51, 0x49, 0x45, 0x3E, 0x00, + 0x00, 0x42, 0x7F, 0x40, 0x00, 0x00, + 0x72, 0x49, 0x49, 0x49, 0x46, 0x00, + 0x21, 0x41, 0x49, 0x4D, 0x33, 0x00, + 0x18, 0x14, 0x12, 0x7F, 0x10, 0x00, + 0x27, 0x45, 0x45, 0x45, 0x39, 0x00, + 0x3C, 0x4A, 0x49, 0x49, 0x31, 0x00, + 0x41, 0x21, 0x11, 0x09, 0x07, 0x00, + 0x36, 0x49, 0x49, 0x49, 0x36, 0x00, + 0x46, 0x49, 0x49, 0x29, 0x1E, 0x00, + 0x00, 0x00, 0x14, 0x00, 0x00, 0x00, + 0x00, 0x40, 0x34, 0x00, 0x00, 0x00, + 0x00, 0x08, 0x14, 0x22, 0x41, 0x00, + 0x14, 0x14, 0x14, 0x14, 0x14, 0x00, + 0x00, 0x41, 0x22, 0x14, 0x08, 0x00, + 0x02, 0x01, 0x59, 0x09, 0x06, 0x00, + 0x3E, 0x41, 0x5D, 0x59, 0x4E, 0x00, + 0x7C, 0x12, 0x11, 0x12, 0x7C, 0x00, + 0x7F, 0x49, 0x49, 0x49, 0x36, 0x00, + 0x3E, 0x41, 0x41, 0x41, 0x22, 0x00, + 0x7F, 0x41, 0x41, 0x41, 0x3E, 0x00, + 0x7F, 0x49, 0x49, 0x49, 0x41, 0x00, + 0x7F, 0x09, 0x09, 0x09, 0x01, 0x00, + 0x3E, 0x41, 0x41, 0x51, 0x73, 0x00, + 0x7F, 0x08, 0x08, 0x08, 0x7F, 0x00, + 0x00, 0x41, 0x7F, 0x41, 0x00, 0x00, + 0x20, 0x40, 0x41, 0x3F, 0x01, 0x00, + 0x7F, 0x08, 0x14, 0x22, 0x41, 0x00, + 0x7F, 0x40, 0x40, 0x40, 0x40, 0x00, + 0x7F, 0x02, 0x1C, 0x02, 0x7F, 0x00, + 0x7F, 0x04, 0x08, 0x10, 0x7F, 0x00, + 0x3E, 0x41, 0x41, 0x41, 0x3E, 0x00, + 0x7F, 0x09, 0x09, 0x09, 0x06, 0x00, + 0x3E, 0x41, 0x51, 0x21, 0x5E, 0x00, + 0x7F, 0x09, 0x19, 0x29, 0x46, 0x00, + 0x26, 0x49, 0x49, 0x49, 0x32, 0x00, + 0x03, 0x01, 0x7F, 0x01, 0x03, 0x00, + 0x3F, 0x40, 0x40, 0x40, 0x3F, 0x00, + 0x1F, 0x20, 0x40, 0x20, 0x1F, 0x00, + 0x3F, 0x40, 0x38, 0x40, 0x3F, 0x00, + 0x63, 0x14, 0x08, 0x14, 0x63, 0x00, + 0x03, 0x04, 0x78, 0x04, 0x03, 0x00, + 0x61, 0x59, 0x49, 0x4D, 0x43, 0x00, + 0x00, 0x7F, 0x41, 0x41, 0x41, 0x00, + 0x02, 0x04, 0x08, 0x10, 0x20, 0x00, + 0x00, 0x41, 0x41, 0x41, 0x7F, 0x00, + 0x04, 0x02, 0x01, 0x02, 0x04, 0x00, + 0x40, 0x40, 0x40, 0x40, 0x40, 0x00, + 0x00, 0x03, 0x07, 0x08, 0x00, 0x00, + 0x20, 0x54, 0x54, 0x78, 0x40, 0x00, + 0x7F, 0x28, 0x44, 0x44, 0x38, 0x00, + 0x38, 0x44, 0x44, 0x44, 0x28, 0x00, + 0x38, 0x44, 0x44, 0x28, 0x7F, 0x00, + 0x38, 0x54, 0x54, 0x54, 0x18, 0x00, + 0x00, 0x08, 0x7E, 0x09, 0x02, 0x00, + 0x18, 0x24, 0x24, 0x1C, 0x78, 0x00, + 0x7F, 0x08, 0x04, 0x04, 0x78, 0x00, + 0x00, 0x44, 0x7D, 0x40, 0x00, 0x00, + 0x20, 0x40, 0x40, 0x3D, 0x00, 0x00, + 0x7F, 0x10, 0x28, 0x44, 0x00, 0x00, + 0x00, 0x41, 0x7F, 0x40, 0x00, 0x00, + 0x7C, 0x04, 0x78, 0x04, 0x78, 0x00, + 0x7C, 0x08, 0x04, 0x04, 0x78, 0x00, + 0x38, 0x44, 0x44, 0x44, 0x38, 0x00, + 0x7C, 0x18, 0x24, 0x24, 0x18, 0x00, + 0x18, 0x24, 0x24, 0x18, 0x7C, 0x00, + 0x7C, 0x08, 0x04, 0x04, 0x08, 0x00, + 0x48, 0x54, 0x54, 0x54, 0x24, 0x00, + 0x04, 0x04, 0x3F, 0x44, 0x24, 0x00, + 0x3C, 0x40, 0x40, 0x20, 0x7C, 0x00, + 0x1C, 0x20, 0x40, 0x20, 0x1C, 0x00, + 0x3C, 0x40, 0x30, 0x40, 0x3C, 0x00, + 0x44, 0x28, 0x10, 0x28, 0x44, 0x00, + 0x4C, 0x90, 0x90, 0x90, 0x7C, 0x00, + 0x44, 0x64, 0x54, 0x4C, 0x44, 0x00, + 0x00, 0x08, 0x36, 0x41, 0x00, 0x00, + 0x00, 0x00, 0x77, 0x00, 0x00, 0x00, + 0x00, 0x41, 0x36, 0x08, 0x00, 0x00, + 0x02, 0x01, 0x02, 0x04, 0x02, 0x00, + 0x3C, 0x26, 0x23, 0x26, 0x3C, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0xC0, 0x30, 0xC8, 0xF4, + 0xEA, 0xDA, 0xBD, 0x7D, 0x83, 0x7D, + 0xBD, 0xDA, 0xEA, 0xF4, 0xC8, 0x30, + 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xF0, 0xFE, 0xF1, 0x91, 0xF6, 0xF0, + 0xF0, 0xFC, 0xF2, 0x92, 0xFC, 0xF0, + 0x10, 0x38, 0x54, 0x10, 0x10, 0x1E, + 0x00, 0x7E, 0x40, 0x40, 0x40, 0x00, + 0x00, 0x7E, 0x12, 0x12, 0x6C, 0x00, + 0x18, 0x3C, 0x7C, 0x3A, 0x7D, 0x24, + 0x14, 0x36, 0x00, 0x36, 0x77, 0x77, + 0x00, 0x00, 0x00, 0x00, 0x80, 0x40, + 0xC0, 0x00, 0x07, 0x19, 0x26, 0x5E, + 0xAE, 0xB6, 0x7A, 0x7D, 0x82, 0x7D, + 0x7A, 0xB6, 0xAE, 0x5E, 0x26, 0x19, + 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x80, 0x40, 0x3C, 0x53, 0x88, 0x84, + 0xC3, 0x60, 0x90, 0x84, 0x60, 0x30, + 0x90, 0x70, 0x21, 0x11, 0x71, 0x81, + 0x61, 0x50, 0xB0, 0x80, 0x00, 0x00, + 0x30, 0xC0, 0x30, 0x00, 0x20, 0xF0, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, +}; diff --git a/keyboards/lime/lime.c b/keyboards/lime/lime.c new file mode 100644 index 0000000000..bfc9ea0faa --- /dev/null +++ b/keyboards/lime/lime.c @@ -0,0 +1,46 @@ +#include "lime.h" + +#ifdef SWAP_HANDS_ENABLE + +__attribute__ ((weak)) +const keypos_t PROGMEM hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = + // The LAYOUT macro could work for this, but it was harder to figure out the + // identity using it. + + // This is the identity layout. +/* +{ \ + { {0, 0}, {1, 0}, {2, 0}, {3, 0}, {4, 0}, {5, 0} }, \ + { {0, 1}, {1, 1}, {2, 1}, {3, 1}, {4, 1}, {5, 1} }, \ + { {0, 2}, {1, 2}, {2, 2}, {3, 2}, {4, 2}, {5, 2} }, \ + { {0, 3}, {1, 3}, {2, 3}, {3, 3}, {4, 3}, {5, 3} }, \ + { {0, 4}, {1, 4}, {2, 4}, {3, 4}, {4, 4}, {5, 4} }, \ + { {0, 5}, {1, 5}, {2, 5}, {3, 5}, {4, 5}, {5, 5} }, \ + \ + { {0, 5}, {1, 5}, {2, 5}, {3, 5}, {4, 5}, {5, 5} }, \ + { {0, 6}, {1, 6}, {2, 6}, {3, 6}, {4, 6}, {5, 6} }, \ + { {0, 7}, {1, 7}, {2, 7}, {3, 7}, {4, 7}, {5, 7} }, \ + { {0, 8}, {1, 8}, {2, 8}, {3, 8}, {4, 8}, {5, 8} }, \ + { {0, 9}, {1, 9}, {2, 9}, {3, 9}, {4, 9}, {5, 9} }, \ + { {0, 10}, {1, 10}, {2, 10}, {3, 10}, {4, 10}, {5, 10} }, \ +}; +*/ + + // This is the mirror, q <-> p, w <-> o, etc... +{ \ + { {0, 5}, {1, 5}, {2, 5}, {3, 5}, {4, 5}, {5, 5} }, \ + { {0, 6}, {1, 6}, {2, 6}, {3, 6}, {4, 6}, {5, 6} }, \ + { {0, 7}, {1, 7}, {2, 7}, {3, 7}, {4, 7}, {5, 7} }, \ + { {0, 8}, {1, 8}, {2, 8}, {3, 8}, {4, 8}, {5, 8} }, \ + { {0, 9}, {1, 9}, {2, 9}, {3, 9}, {4, 9}, {5, 9} }, \ + { {0, 10}, {1, 10}, {2, 10}, {3, 10}, {4, 10}, {5, 10} }, \ + \ + { {0, 0}, {1, 0}, {2, 0}, {3, 0}, {4, 0}, {5, 0} }, \ + { {0, 1}, {1, 1}, {2, 1}, {3, 1}, {4, 1}, {5, 1} }, \ + { {0, 2}, {1, 2}, {2, 2}, {3, 2}, {4, 2}, {5, 2} }, \ + { {0, 3}, {1, 3}, {2, 3}, {3, 3}, {4, 3}, {5, 3} }, \ + { {0, 4}, {1, 4}, {2, 4}, {3, 4}, {4, 4}, {5, 4} }, \ + { {0, 5}, {1, 5}, {2, 5}, {3, 5}, {4, 5}, {5, 5} }, \ +}; + +#endif diff --git a/keyboards/lime/lime.h b/keyboards/lime/lime.h new file mode 100644 index 0000000000..97cee454bc --- /dev/null +++ b/keyboards/lime/lime.h @@ -0,0 +1,21 @@ + /* Copyright 2021 HellSingCoder + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#ifdef KEYBOARD_lime_rev1 + #include "rev1.h" +#endif diff --git a/keyboards/lime/readme.md b/keyboards/lime/readme.md new file mode 100644 index 0000000000..539ae97fd3 --- /dev/null +++ b/keyboards/lime/readme.md @@ -0,0 +1,30 @@ +# Lime Keyboard + +![Lime Keyboard](https://github.com/HellSingCoder/LimeKeyboard/blob/main/media/lime_keyboard.jpeg?raw=true) + +Lime is a 6×4+6 keys column-staggered split keyboard with encoder and joystick support. Based on [Lily58](https://github.com/kata0510/Lily58), [Corne](https://github.com/foostan/crkbd), [Helix](https://github.com/MakotoKurauchi/helix) and [Sofle](https://github.com/josefadamcik/SofleKeyboard) keyboards. This board features a reversible PCB, OLEDs, Underglow and Bluetooth support. The PCB has holes for floating or screwed mounts but can be also mounted with a gasket. + +The Lime keyboard was created by [HellTM](https://github.com/HellSingCoder) with the help of the QMK and custom keyboard community. + +Build guide and a build log not available yet + +* Keyboard Maintainer: [HellSingCoder](https://www.simonepellegrino.com/) (GitHub: [HellTM](https://github.com/HellSingCoder)) +* Hardware Supported: LimeKeyboard PCB, ProMicro +* Hardware Availability: [PCB & Case Data](https://github.com/HellSingCoder/LimeKeyboard) + +Make example for this keyboard (after setting up your build environment): + + make lime:default + +Flashing example for this keyboard: + + make lime:default:flash + +Press reset button on he keyboard when asked. You can do that in 3 ways: +* **Physical reset button**: Briefly press the button near the TRRS connector on the PCB - if you haven't installed one, short the pads instead +* **Keycode in layout**: Press the key mapped to `RESET` (`Lower` + `Raise` + `Esc` on the default layout) +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard + +Disconnect the first half, connect the second one and repeat the process. + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/lime/rev1/config.h b/keyboards/lime/rev1/config.h new file mode 100644 index 0000000000..55c045dc67 --- /dev/null +++ b/keyboards/lime/rev1/config.h @@ -0,0 +1,68 @@ + /* Copyright 2021 HellSingCoder + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x0666 +#define PRODUCT_ID 0x2784 +#define DEVICE_VER 0x0001 +#define MANUFACTURER HellSingCoder +#define PRODUCT Lime + +/* key matrix size */ +// Rows are doubled-up +#define MATRIX_ROWS 12 +#define MATRIX_COLS 6 + +// wiring of each half +#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4, B5 } +#define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 } +#define DIODE_DIRECTION COL2ROW + +#define TAPPING_TERM 100 +#define DEBOUNCE 5 + +/* encoder support */ +#ifdef ENCODER_ENABLE +# define ENCODERS_PAD_A { F5 } +# define ENCODERS_PAD_B { F4 } +# define ENCODERS_PAD_A_RIGHT { F4 } +# define ENCODERS_PAD_B_RIGHT { F5 } +# define ENCODER_RESOLUTION 2 +#endif + +/* joystick support */ +#ifdef JOYSTICK_ENABLE +# define JOYSTICK_AXES_COUNT 2 +# define JOYSTICK_BUTTON_COUNT 1 +# define JOYSTICK_AXES_RESOLUTION 8 +#endif + +#define TAP_CODE_DELAY 10 + +/* communication between sides */ +#define USE_SERIAL +#define SOFT_SERIAL_PIN D2 + +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION +#define SPLIT_USB_DETECT + +#ifdef WPM_ENABLE +# define SPLIT_WPM_ENABLE +#endif + diff --git a/keyboards/lime/rev1/info.json b/keyboards/lime/rev1/info.json new file mode 100644 index 0000000000..14aafb3235 --- /dev/null +++ b/keyboards/lime/rev1/info.json @@ -0,0 +1,25 @@ +{ + "keyboard_name": "Lime", + "url": "https://github.com/HellSingCoder/LimeKeyboard", + "maintainer": "HellSingCoder", + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"#", "x":3, "y":0}, {"label":"*", "x":11.5, "y":0}, {"label":"@", "x":2, "y":0.13}, {"label":"$", "x":4, "y":0.13}, {"label":"&", "x":10.5, "y":0.13}, + {"label":"(", "x":12.5, "y":0.13}, {"label":"%", "x":5, "y":0.25}, {"label":"^", "x":9.5, "y":0.25}, {"label":"!", "x":1, "y":0.38}, {"label":")", "x":13.5, "y":0.38}, + {"label":"Esc", "x":0, "y":0.5}, {"label":"", "x":14.5, "y":0.5}, {"label":"E", "x":3, "y":1}, {"label":"I", "x":11.5, "y":1}, + {"label":"W", "x":2, "y":1.13}, {"label":"R", "x":4, "y":1.13}, {"label":"U", "x":10.5, "y":1.13}, {"label":"O", "x":12.5, "y":1.13}, {"label":"T", "x":5, "y":1.25}, + {"label":"Y", "x":9.5, "y":1.25}, {"label":"Q", "x":1, "y":1.38}, {"label":"P", "x":13.5, "y":1.38}, {"label":"", "x":0, "y":1.5}, + {"label":"~", "x":14.5, "y":1.5}, {"label":"D", "x":3, "y":2}, {"label":"K", "x":11.5, "y":2}, {"label":"S", "x":2, "y":2.13}, {"label":"F", "x":4, "y":2.13}, + {"label":"J", "x":10.5, "y":2.13}, {"label":"L", "x":12.5, "y":2.13}, {"label":"G", "x":5, "y":2.25}, {"label":"H", "x":9.5, "y":2.25}, {"label":"A", "x":1, "y":2.38}, + {"label":":", "x":13.5, "y":2.38}, {"label":"", "x":0, "y":2.5}, {"label":"\"", "x":14.5, "y":2.5}, {"label":"C", "x":3, "y":3}, + {"label":"<", "x":11.5, "y":3}, {"label":"X", "x":2, "y":3.13}, {"label":"V", "x":4, "y":3.13}, {"label":"M", "x":10.5, "y":3.13}, {"label":">", "x":12.5, "y":3.13}, + {"label":"B", "x":5, "y":3.25}, {"label":"Joystick", "x":6, "y":3.25}, {"label":"Encoder", "x":8.5, "y":3.25}, {"label":"N", "x":9.5, "y":3.25}, + {"label":"Z", "x":1, "y":3.38}, {"label":"?", "x":13.5, "y":3.38}, {"label":"", "x":0, "y":3.5}, {"label":"|", "x":14.5, "y":3.5}, + {"label":"Alt", "x":2.35, "y":4.13}, {"label":"Del", "x":3.35, "y":4.13}, {"label":"{", "x":11.15, "y":4.13}, {"label":"}", "x":12.15, "y":4.13}, + {"label":"OS", "x":1.35, "y":4.35}, {"label":"_", "x":13.15, "y":4.38}, {"label":"Lower", "x":0.35, "y":4.5}, {"label":"+", "x":14.15, "y":4.5}, + {"label":"Ctrl", "x":5.55, "y":2.85}, {"label":"Enter", "x":-0.4, "y":4.1, "h":1.25}, {"label":"Space", "x":-4.1, "y":3.35, "h":1.25}, {"label":"Raise", "x":8.4, "y":11.2} + ] + } + } +} diff --git a/keyboards/lime/rev1/rev1.c b/keyboards/lime/rev1/rev1.c new file mode 100644 index 0000000000..4cc560623b --- /dev/null +++ b/keyboards/lime/rev1/rev1.c @@ -0,0 +1,38 @@ + /* Copyright 2021 HellSingCoder + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "lime.h" + +/* Encoders */ +#ifdef ENCODER_ENABLE + bool encoder_update_user(uint8_t index, bool clockwise) { + + if (index == 0) { + if (clockwise) { + tap_code(KC_MNXT); + } else { + tap_code(KC_MPRV); + } + } else if (index == 1) { + if (clockwise) { + tap_code(KC_VOLU); + } else { + tap_code(KC_VOLD); + } + } + return false; + } +#endif diff --git a/keyboards/lime/rev1/rev1.h b/keyboards/lime/rev1/rev1.h new file mode 100644 index 0000000000..24a3f7212b --- /dev/null +++ b/keyboards/lime/rev1/rev1.h @@ -0,0 +1,41 @@ + /* Copyright 2021 HellSingCoder + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once +#include "quantum.h" + +#define LAYOUT( \ + L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ + L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ + L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ + L30, L31, L32, L33, L34, L35, L50, R50, R30, R31, R32, R33, R34, R35, \ + L40, L41, L42, L43, L44, L45, R40, R41, R42, R43, R44, R45 \ + ) \ + { \ + { L00, L01, L02, L03, L04, L05 }, \ + { L10, L11, L12, L13, L14, L15 }, \ + { L20, L21, L22, L23, L24, L25 }, \ + { L30, L31, L32, L33, L34, L35 }, \ + { L40, L41, L42, L43, L44, L45 }, \ + { L50, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ + { R05, R04, R03, R02, R01, R00 }, \ + { R15, R14, R13, R12, R11, R10 }, \ + { R25, R24, R23, R22, R21, R20 }, \ + { R35, R34, R33, R32, R31, R30 }, \ + { R45, R44, R43, R42, R41, R40 }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, R50 } \ + } + diff --git a/keyboards/lime/rev1/rules.mk b/keyboards/lime/rev1/rules.mk new file mode 100644 index 0000000000..f83c13ac8d --- /dev/null +++ b/keyboards/lime/rev1/rules.mk @@ -0,0 +1,4 @@ +ENCODER_ENABLE = yes +ENCODER_RIGHT_ENABLE = yes +OLED_ENABLE = yes +OLED_DRIVER = SSD1306 diff --git a/keyboards/lime/rules.mk b/keyboards/lime/rules.mk new file mode 100644 index 0000000000..b6d3c2b7d1 --- /dev/null +++ b/keyboards/lime/rules.mk @@ -0,0 +1,24 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = caterina + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = no # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +SPLIT_KEYBOARD = yes +SWAP_HANDS_ENABLE = yes +DEFAULT_FOLDER = lime/rev1 From f879fbfb6d52c3d106904b876a11bb1983b0c06a Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Thu, 11 Nov 2021 08:56:35 -0800 Subject: [PATCH 465/595] [Keyboard] Fix compilation issues for Lime (#15116) --- keyboards/lime/keymaps/default/keymap.c | 3 ++- keyboards/lime/keymaps/default/rules.mk | 2 ++ 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/keyboards/lime/keymaps/default/keymap.c b/keyboards/lime/keymaps/default/keymap.c index f6c711597d..2d904d36db 100644 --- a/keyboards/lime/keymaps/default/keymap.c +++ b/keyboards/lime/keymaps/default/keymap.c @@ -463,7 +463,7 @@ bool showedJump = true; return OLED_ROTATION_270; } - void oled_task_user(void) { + bool oled_task_user(void) { /* Keyboard Pet Variables */ current_wpm = get_current_wpm(); @@ -474,6 +474,7 @@ bool showedJump = true; } else { print_logo_narrow(); } + return false; } #endif diff --git a/keyboards/lime/keymaps/default/rules.mk b/keyboards/lime/keymaps/default/rules.mk index cc5b7ac9aa..b4572ce79a 100644 --- a/keyboards/lime/keymaps/default/rules.mk +++ b/keyboards/lime/keymaps/default/rules.mk @@ -4,4 +4,6 @@ JOYSTICK_ENABLE = yes JOYSTICK_DRIVER = analog EXTRAKEY_ENABLE = yes WPM_ENABLE = yes +LTO_ENABLE = yes + SRC += analog.c From 6ab68e931824cbac27da17e16758b470294c129b Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Thu, 11 Nov 2021 08:56:51 -0800 Subject: [PATCH 466/595] [Keyboard] Fix compilation issues for Krush boards (#15117) --- .../krush/krush60/solder/solder.h | 86 +++++++++---------- .../krush/krush65/solder/keymaps/via/rules.mk | 3 +- 2 files changed, 44 insertions(+), 45 deletions(-) diff --git a/keyboards/sawnsprojects/krush/krush60/solder/solder.h b/keyboards/sawnsprojects/krush/krush60/solder/solder.h index d4847b9124..d442776c9d 100644 --- a/keyboards/sawnsprojects/krush/krush60/solder/solder.h +++ b/keyboards/sawnsprojects/krush/krush60/solder/solder.h @@ -48,14 +48,14 @@ K80, K90, K81, K92, K94, K85, K95, K97 \ ) { \ { K00, K01, K02, K03, K04, K05, K06, XXX }, \ - { K10, K11, K12, K13, K14, K15, XXX, xxx }, \ + { K10, K11, K12, K13, K14, K15, XXX, XXX }, \ { K20, K21, K22, K23, K24, K25, K26, XXX }, \ { K30, K31, K32, K33, K34, K35, K36, XXX }, \ { K40, K41, K42, K43, K44, K45, K46, K47 }, \ { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ { K60, K61, K62, K63, K64, K65, K66, XXX }, \ - { K70, K71, K72, K73, K74, xxx, XXX, xxx }, \ - { K80, K81, xxx, XXX, xxx, K85, xxx, XXX }, \ + { K70, K71, K72, K73, K74, XXX, XXX, XXX }, \ + { K80, K81, XXX, XXX, XXX, K85, XXX, XXX }, \ { K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ } //LAYOUT_60_iso @@ -68,14 +68,14 @@ K80, K90, K81, K92, K94, K85, K95, K97 \ ) { \ { K00, K01, K02, K03, K04, K05, K06, XXX }, \ - { K10, K11, K12, K13, K14, K15, XXX, xxx }, \ + { K10, K11, K12, K13, K14, K15, XXX, XXX }, \ { K20, K21, K22, K23, K24, K25, K26, XXX }, \ { K30, K31, K32, K33, K34, K35, K36, XXX }, \ { K40, K41, K42, K43, K44, K45, K46, K47 }, \ { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ { K60, K61, K62, K63, K64, K65, K66, XXX }, \ - { K70, K71, K72, K73, K74, xxx, XXX, xxx }, \ - { K80, K81, xxx, XXX, xxx, K85, xxx, XXX }, \ + { K70, K71, K72, K73, K74, XXX, XXX, XXX }, \ + { K80, K81, XXX, XXX, XXX, K85, XXX, XXX }, \ { K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ } //LAYOUT_60_ansi_split_bs @@ -93,8 +93,8 @@ { K40, K41, K42, K43, K44, K45, K46, K47 }, \ { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ { K60, K61, K62, K63, K64, K65, K66, XXX }, \ - { K70, K71, K72, K73, K74, xxx, XXX, xxx }, \ - { K80, K81, xxx, XXX, xxx, K85, xxx, XXX }, \ + { K70, K71, K72, K73, K74, XXX, XXX, XXX }, \ + { K80, K81, XXX, XXX, XXX, K85, XXX, XXX }, \ { K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ } //LAYOUT_60_ansi_split_spc @@ -106,14 +106,14 @@ K80, K90, K81, K82, K92, K84, K94, K85, K95, K97 \ ) { \ { K00, K01, K02, K03, K04, K05, K06, XXX }, \ - { K10, K11, K12, K13, K14, K15, XXX, xxx }, \ + { K10, K11, K12, K13, K14, K15, XXX, XXX }, \ { K20, K21, K22, K23, K24, K25, K26, XXX }, \ { K30, K31, K32, K33, K34, K35, K36, XXX }, \ { K40, K41, K42, K43, K44, K45, K46, K47 }, \ { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ { K60, K61, K62, K63, K64, K65, K66, XXX }, \ - { K70, K71, K72, K73, K74, xxx, XXX, xxx }, \ - { K80, K81, K82, XXX, K84, K85, xxx, XXX }, \ + { K70, K71, K72, K73, K74, XXX, XXX, XXX }, \ + { K80, K81, K82, XXX, K84, K85, XXX, XXX }, \ { K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ } //LAYOUT_60_ansi_split_bs_spc @@ -131,8 +131,8 @@ { K40, K41, K42, K43, K44, K45, K46, K47 }, \ { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ { K60, K61, K62, K63, K64, K65, K66, XXX }, \ - { K70, K71, K72, K73, K74, xxx, XXX, xxx }, \ - { K80, K81, K82, XXX, K84, K85, xxx, XXX }, \ + { K70, K71, K72, K73, K74, XXX, XXX, XXX }, \ + { K80, K81, K82, XXX, K84, K85, XXX, XXX }, \ { K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ } //LAYOUT_60_ansi_7u_spc @@ -144,15 +144,15 @@ K80, K90, K81, K92, K85, K95, K97 \ ) { \ { K00, K01, K02, K03, K04, K05, K06, XXX }, \ - { K10, K11, K12, K13, K14, K15, XXX, xxx }, \ + { K10, K11, K12, K13, K14, K15, XXX, XXX }, \ { K20, K21, K22, K23, K24, K25, K26, XXX }, \ { K30, K31, K32, K33, K34, K35, K36, XXX }, \ { K40, K41, K42, K43, K44, K45, K46, K47 }, \ { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ { K60, K61, K62, K63, K64, K65, K66, XXX }, \ - { K70, K71, K72, K73, K74, xxx, XXX, xxx }, \ - { K80, K81, xxx, XXX, xxx, K85, xxx, XXX }, \ - { K90, XXX, K92, XXX, xxx, K95, XXX, K97 }, \ + { K70, K71, K72, K73, K74, XXX, XXX, XXX }, \ + { K80, K81, XXX, XXX, XXX, K85, XXX, XXX }, \ + { K90, XXX, K92, XXX, XXX, K95, XXX, K97 }, \ } //LAYOUT_60_ansi_split_7u_spc #define LAYOUT_60_ansi_split_bs_7u_spc( \ @@ -169,9 +169,9 @@ { K40, K41, K42, K43, K44, K45, K46, K47 }, \ { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ { K60, K61, K62, K63, K64, K65, K66, XXX }, \ - { K70, K71, K72, K73, K74, xxx, XXX, xxx }, \ - { K80, K81, xxx, XXX, xxx, K85, xxx, XXX }, \ - { K90, XXX, K92, XXX, xxx, K95, XXX, K97 }, \ + { K70, K71, K72, K73, K74, XXX, XXX, XXX }, \ + { K80, K81, XXX, XXX, XXX, K85, XXX, XXX }, \ + { K90, XXX, K92, XXX, XXX, K95, XXX, K97 }, \ } //LAYOUT_60_ansi_arrow_split_bs #define LAYOUT_60_ansi_arrow_split_bs( \ @@ -187,9 +187,9 @@ { K30, K31, K32, K33, K34, K35, K36, XXX }, \ { K40, K41, K42, K43, K44, K45, K46, K47 }, \ { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ - { K60, K61, K62, K63, K64, xxx, K66, XXX }, \ + { K60, K61, K62, K63, K64, XXX, K66, XXX }, \ { K70, K71, K72, K73, K74, K75, XXX, K77 }, \ - { K80, K81, xxx, XXX, xxx, K85, K86, XXX }, \ + { K80, K81, XXX, XXX, XXX, K85, K86, XXX }, \ { K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ } //LAYOUT_60_ansi_arrow_split_spc @@ -201,12 +201,12 @@ K80, K90, K81, K82, K92, K84, K94, K85, K86, K95, K97 \ ) { \ { K00, K01, K02, K03, K04, K05, K06, XXX }, \ - { K10, K11, K12, K13, K14, K15, XXX, xxx }, \ + { K10, K11, K12, K13, K14, K15, XXX, XXX }, \ { K20, K21, K22, K23, K24, K25, K26, XXX }, \ { K30, K31, K32, K33, K34, K35, K36, XXX }, \ { K40, K41, K42, K43, K44, K45, K46, K47 }, \ { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ - { K60, K61, K62, K63, K64, xxx, K66, XXX }, \ + { K60, K61, K62, K63, K64, XXX, K66, XXX }, \ { K70, K71, K72, K73, K74, K75, XXX, K77 }, \ { K80, K81, K82, XXX, K84, K85, K86, XXX }, \ { K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ @@ -225,7 +225,7 @@ { K30, K31, K32, K33, K34, K35, K36, XXX }, \ { K40, K41, K42, K43, K44, K45, K46, K47 }, \ { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ - { K60, K61, K62, K63, K64, xxx, K66, XXX }, \ + { K60, K61, K62, K63, K64, XXX, K66, XXX }, \ { K70, K71, K72, K73, K74, K75, XXX, K77 }, \ { K80, K81, K82, XXX, K84, K85, K86, XXX }, \ { K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ @@ -239,15 +239,15 @@ K80, K90, K81, K92, K85, K86, K95, K97 \ ) { \ { K00, K01, K02, K03, K04, K05, K06, XXX }, \ - { K10, K11, K12, K13, K14, K15, XXX, xxx }, \ + { K10, K11, K12, K13, K14, K15, XXX, XXX }, \ { K20, K21, K22, K23, K24, K25, K26, XXX }, \ { K30, K31, K32, K33, K34, K35, K36, XXX }, \ { K40, K41, K42, K43, K44, K45, K46, K47 }, \ { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ - { K60, K61, K62, K63, K64, xxx, K66, XXX }, \ + { K60, K61, K62, K63, K64, XXX, K66, XXX }, \ { K70, K71, K72, K73, K74, K75, XXX, K77 }, \ - { K80, K81, xxx, XXX, xxx, K85, K86, XXX }, \ - { K90, XXX, K92, XXX, xxx, K95, XXX, K97 }, \ + { K80, K81, XXX, XXX, XXX, K85, K86, XXX }, \ + { K90, XXX, K92, XXX, XXX, K95, XXX, K97 }, \ } //LAYOUT_60_ansi_arrow //x @@ -259,14 +259,14 @@ K80, K90, K81, K92, K94, K85, K86, K95, K97 \ ) { \ { K00, K01, K02, K03, K04, K05, K06, XXX }, \ - { K10, K11, K12, K13, K14, K15, XXX, xxx }, \ + { K10, K11, K12, K13, K14, K15, XXX, XXX }, \ { K20, K21, K22, K23, K24, K25, K26, XXX }, \ { K30, K31, K32, K33, K34, K35, K36, XXX }, \ { K40, K41, K42, K43, K44, K45, K46, K47 }, \ { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ - { K60, K61, K62, K63, K64, xxx, K66, XXX }, \ + { K60, K61, K62, K63, K64, XXX, K66, XXX }, \ { K70, K71, K72, K73, K74, K75, XXX, K77 }, \ - { K80, K81, xxx, XXX, xxx, K85, K86, XXX }, \ + { K80, K81, XXX, XXX, XXX, K85, K86, XXX }, \ { K90, XXX, K92, XXX, K94, K95, XXX, K97 }, \ } //x @@ -284,10 +284,10 @@ { K30, K31, K32, K33, K34, K35, K36, XXX }, \ { K40, K41, K42, K43, K44, K45, K46, K47 }, \ { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ - { K60, K61, K62, K63, K64, xxx, K66, XXX }, \ + { K60, K61, K62, K63, K64, XXX, K66, XXX }, \ { K70, K71, K72, K73, K74, K75, XXX, K77 }, \ - { K80, K81, xxx, XXX, xxx, K85, K86, XXX }, \ - { K90, XXX, K92, XXX, xxx, K95, XXX, K97 }, \ + { K80, K81, XXX, XXX, XXX, K85, K86, XXX }, \ + { K90, XXX, K92, XXX, XXX, K95, XXX, K97 }, \ } //LAYOUT_60_ansi_tsangan #define LAYOUT_60_ansi_tsangan( \ @@ -298,15 +298,15 @@ K80, K90, K81, K92, K85, K95, K97 \ ) { \ { K00, K01, K02, K03, K04, K05, K06, XXX }, \ - { K10, K11, K12, K13, K14, K15, XXX, xxx }, \ + { K10, K11, K12, K13, K14, K15, XXX, XXX }, \ { K20, K21, K22, K23, K24, K25, K26, XXX }, \ { K30, K31, K32, K33, K34, K35, K36, XXX }, \ { K40, K41, K42, K43, K44, K45, K46, K47 }, \ { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ { K60, K61, K62, K63, K64, K65, K66, XXX }, \ - { K70, K71, K72, K73, K74, xxx, XXX, K77 }, \ - { K80, K81, xxx, XXX, xxx, K85, xxx, XXX }, \ - { K90, XXX, K92, XXX, xxx, K95, XXX, K97 }, \ + { K70, K71, K72, K73, K74, XXX, XXX, K77 }, \ + { K80, K81, XXX, XXX, XXX, K85, XXX, XXX }, \ + { K90, XXX, K92, XXX, XXX, K95, XXX, K97 }, \ } //LAYOUT_60_ansi_tsangan_split_bs #define LAYOUT_60_ansi_tsangan_split_bs( \ @@ -323,13 +323,11 @@ { K40, K41, K42, K43, K44, K45, K46, K47 }, \ { K50, K51, K52, K53, K54, K55, XXX, XXX }, \ { K60, K61, K62, K63, K64, K65, K66, XXX }, \ - { K70, K71, K72, K73, K74, xxx, XXX, K77 }, \ - { K80, K81, xxx, XXX, xxx, K85, xxx, XXX }, \ - { K90, XXX, K92, XXX, xxx, K95, XXX, K97 }, \ + { K70, K71, K72, K73, K74, XXX, XXX, K77 }, \ + { K80, K81, XXX, XXX, XXX, K85, XXX, XXX }, \ + { K90, XXX, K92, XXX, XXX, K95, XXX, K97 }, \ } //LAYOUT_60_iso_tsangan #define LAYOUT_60_iso_tsangan LAYOUT_60_ansi_tsangan //LAYOUT_60_iso_tsangan_split_bs #define LAYOUT_60_iso_tsangan_split_bs LAYOUT_60_ansi_tsangan_split_bs - - diff --git a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/via/rules.mk b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/via/rules.mk index 036bd6d1c3..36b7ba9cbc 100644 --- a/keyboards/sawnsprojects/krush/krush65/solder/keymaps/via/rules.mk +++ b/keyboards/sawnsprojects/krush/krush65/solder/keymaps/via/rules.mk @@ -1 +1,2 @@ -VIA_ENABLE = yes \ No newline at end of file +VIA_ENABLE = yes +LTO_ENABLE = yes From 7d1c33afe6c986201b0eddc1d5055b4f3a58ae50 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Thu, 11 Nov 2021 08:57:44 -0800 Subject: [PATCH 467/595] [Keyboard] Reduce compiled size for pk64rgb's via keymap (#15118) --- keyboards/playkbtw/pk64rgb/config.h | 12 ++++---- keyboards/playkbtw/pk64rgb/info.json | 28 +++++++++---------- .../playkbtw/pk64rgb/keymaps/via/rules.mk | 4 +-- 3 files changed, 22 insertions(+), 22 deletions(-) diff --git a/keyboards/playkbtw/pk64rgb/config.h b/keyboards/playkbtw/pk64rgb/config.h index 302929ae97..0e63f9204d 100644 --- a/keyboards/playkbtw/pk64rgb/config.h +++ b/keyboards/playkbtw/pk64rgb/config.h @@ -55,12 +55,12 @@ #define DRIVER_ADDR_1 0b1010000 #define DRIVER_COUNT 1 #define DRIVER_LED_TOTAL 64 - -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS + +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS #define DISABLE_RGB_MATRIX_BAND_SAT #define DISABLE_RGB_MATRIX_BAND_VAL #define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT @@ -78,7 +78,7 @@ # define RGBLIGHT_EFFECT_KNIGHT # define RGBLIGHT_EFFECT_CHRISTMAS # define RGBLIGHT_EFFECT_STATIC_GRADIENT -# define RGBLIGHT_EFFECT_ALTERNATING +// # define RGBLIGHT_EFFECT_ALTERNATING # define RGBLIGHT_EFFECT_TWINKLE # define RGBLED_NUM 18 # define RGBLIGHT_HUE_STEP 5 diff --git a/keyboards/playkbtw/pk64rgb/info.json b/keyboards/playkbtw/pk64rgb/info.json index 736560e063..bc973f1b4c 100644 --- a/keyboards/playkbtw/pk64rgb/info.json +++ b/keyboards/playkbtw/pk64rgb/info.json @@ -1,10 +1,10 @@ { - "keyboard_name": "PK64RGB", - "url": "", - "maintainer": "yj7272098", - "layouts": { - "LAYOUT_64_ansi": - [ + "keyboard_name": "PK64RGB", + "url": "", + "maintainer": "yj7272098", + "layouts": { + "LAYOUT_64_ansi": { + "layout": [ {"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, @@ -19,7 +19,7 @@ {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0, "w":2}, - + {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, @@ -35,7 +35,7 @@ {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, - + {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, @@ -50,7 +50,7 @@ {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, - + {"x":0, "y":3, "w":2}, {"x":2, "y":3}, @@ -66,7 +66,7 @@ {"x":12, "y":3}, {"x":13, "y":3}, {"x":14, "y":3}, - + {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, @@ -76,8 +76,8 @@ {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, - {"x":14, "y":4}, - -] + {"x":14, "y":4} + ] + } + } } -} \ No newline at end of file diff --git a/keyboards/playkbtw/pk64rgb/keymaps/via/rules.mk b/keyboards/playkbtw/pk64rgb/keymaps/via/rules.mk index 7f1f849dce..f39e053c66 100644 --- a/keyboards/playkbtw/pk64rgb/keymaps/via/rules.mk +++ b/keyboards/playkbtw/pk64rgb/keymaps/via/rules.mk @@ -1,2 +1,2 @@ -LTO_ENABLE = yes -VIA_ENABLE = yes \ No newline at end of file +VIA_ENABLE = yes +SPACE_CADET_ENABLE = no From d13286fd29b2dff2a970237ca59def5b0cd2825e Mon Sep 17 00:00:00 2001 From: George Petri Date: Thu, 11 Nov 2021 19:38:25 +0200 Subject: [PATCH 468/595] Update Gergoplex keymap (#15111) * fix wrong config * start work on gaming layer * mod tap per key * tap dance to game layer * impl game layer * add double quotes and underline --- .../gergoplex/keymaps/georgepetri/config.h | 1 + .../keymaps/georgepetri/gergoplex.def | 1 + .../gergoplex/keymaps/georgepetri/keymap.c | 119 ++++++++++++++++-- .../gergoplex/keymaps/georgepetri/rules.mk | 2 + 4 files changed, 110 insertions(+), 13 deletions(-) diff --git a/keyboards/gboards/gergoplex/keymaps/georgepetri/config.h b/keyboards/gboards/gergoplex/keymaps/georgepetri/config.h index a60188ef90..d3fe5b8145 100644 --- a/keyboards/gboards/gergoplex/keymaps/georgepetri/config.h +++ b/keyboards/gboards/gergoplex/keymaps/georgepetri/config.h @@ -24,3 +24,4 @@ along with this program. If not, see . #undef DEBOUNCE #define DEBOUNCE 25 + diff --git a/keyboards/gboards/gergoplex/keymaps/georgepetri/gergoplex.def b/keyboards/gboards/gergoplex/keymaps/georgepetri/gergoplex.def index 239d351b70..d50d431c8b 100644 --- a/keyboards/gboards/gergoplex/keymaps/georgepetri/gergoplex.def +++ b/keyboards/gboards/gergoplex/keymaps/georgepetri/gergoplex.def @@ -3,4 +3,5 @@ COMB(hjEnt, KC_ENT, KC_H, KC_J) COMB(loDel, KC_DEL, KC_L, KC_O) COMB(pscBspace, KC_BSPC, KC_P, KC_SCLN) +COMB(sdEsc, KC_ESC, KC_D, KC_F) COMB(fgEsc, KC_ESC, KC_F, KC_G) diff --git a/keyboards/gboards/gergoplex/keymaps/georgepetri/keymap.c b/keyboards/gboards/gergoplex/keymaps/georgepetri/keymap.c index de3bcf67ad..e3b8944814 100644 --- a/keyboards/gboards/gergoplex/keymaps/georgepetri/keymap.c +++ b/keyboards/gboards/gergoplex/keymaps/georgepetri/keymap.c @@ -24,15 +24,36 @@ enum { _ALPHA, // default + _GAME, // gaming _SPECIAL, // special characters _NUMBERS // numbers/function/motion }; +typedef enum { + TD_NONE, + TD_UNKNOWN, + TD_SINGLE_TAP, + TD_DOUBLE_TAP, + TD_TRIPLE_TAP +} td_state_t; + +typedef struct { + bool is_press_action; + td_state_t state; +} td_tap_t; + +enum { + GAME +}; + +td_state_t cur_dance(qk_tap_dance_state_t *state); + +void ql_finished(qk_tap_dance_state_t *state, void *user_data); +void ql_reset(qk_tap_dance_state_t *state, void *user_data); + #define KC_CTL_A MT(MOD_LCTL, KC_A) // Tap for A, hold for Control #define KC_SFT_Z MT(MOD_RSFT, KC_Z) // Tap for Z, hold for Shift #define KC_SFT_SL MT(MOD_RSFT, KC_SLSH) // Tap for slash, hold for Shift - -#define KC_ALT_ENT MT(MOD_LALT, KC_ENT) // Tap for Enter, hold for Alt (Option) #define KC_SPE_SPC LT(_SPECIAL, KC_SPC) // Tap for Space, hold for Special layer #define KC_NUM_SPC LT(_NUMBERS, KC_SPC) // Tap for Space, hold for Numbers layer @@ -41,7 +62,7 @@ enum { * ,-------------------------------. ,-------------------------------. * | | | | | | | | | | | | * |-------+-----+-----+-----+-----| |-----+-----+-----+-DEL-+-BSPC--| - * | | | | ESC | | ENT | | | | + * | | | ESC ESC | | ENT | | | | * |-------+-----+-----+-RMB-+-LMB-| |-----+-----+-----+-----+-------| * | | | | | | | | | | | | * `-------------------------------' `-------------------------------' @@ -51,7 +72,7 @@ enum { */ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Keymap 0: Alpha layer + /* Alpha layer * * ,-------------------------------. ,-------------------------------. * | Q | W | E | R | T | | Y | U | I | O | P | @@ -60,17 +81,36 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * |-------+-----+-----+-----+-----| |-----+-----+-----+-----+-------| * | SHFT Z| X | C | V | B | | N | M | , | . |SHFT / | * `-------------------------------' `-------------------------------' - * .--------------------------. .----------------------. - * | META | ENT ALT | SPC SPE | | SPC NUM | TAB | SHFT | - * '--------------------------' '----------------------' + * .----------------------. .----------------------. + * | META | ALT | SPC SPE | | SPC NUM | TAB | SHFT | + * '----------------------' '----------------------' */ [_ALPHA] = LAYOUT_split_3x5_3( KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_CTL_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, - KC_SFT_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMMA, KC_DOT, KC_SFT_SL, - KC_LGUI, KC_ALT_ENT, KC_SPE_SPC, KC_NUM_SPC, KC_TAB, KC_RSFT), + KC_SFT_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, TD(GAME), KC_DOT, KC_SFT_SL, + KC_LGUI, KC_LALT, KC_SPE_SPC, KC_NUM_SPC, KC_TAB, KC_RSFT), - /* Keymap 1: Special characters layer + /* Gaming layer + * + * ,-------------------------------. ,-------------------------------. + * | ~ | Q | W | E | R | | Y | U | I | O | P | + * |-------+-----+-----+-----+-----| |-----+-----+-----+-----+-------| + * | CTRL | A | S | D | F | | H | J | K | L | ; | + * |-------+-----+-----+-----+-----| |-----+-----+-----+-----+-------| + * | SHFT | Z | X | C | V | | N | M | , | . |SHFT / | + * `-------------------------------' `-------------------------------' + * .------------------. .----------------------. + * | META | ALT | SPC | | SPC NUM | TAB | SHFT | + * '------------------' '----------------------' + */ + [_GAME] = LAYOUT_split_3x5_3( + KC_TILD, KC_Q, KC_W, KC_E, KC_R, KC_Y, KC_U, KC_I, KC_O, KC_P, + KC_LCTL , KC_A, KC_S, KC_D, KC_F, KC_H, KC_J, KC_K, KC_L, KC_SCLN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_N, KC_M, TD(GAME), KC_DOT, KC_SFT_SL, + KC_LGUI, KC_LALT, KC_SPC, KC_NUM_SPC, KC_TAB, KC_RSFT), + + /* Special characters layer * * ,-------------------------------. ,-------------------------------. * | ! | @ | { | } | | | | ` | - | = | / | \ | @@ -80,16 +120,16 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * | % | ^ | [ | ] | | | & | ~ | + | * | | * `-------------------------------' `-------------------------------' * .-------------------. .-----------------. - * | | | | | | | | + * | | | | | | " | _ | * '-------------------' '-----------------' */ [_SPECIAL] = LAYOUT_split_3x5_3( KC_EXLM, KC_AT, KC_LCBR, KC_RCBR, KC_PIPE, KC_GRV, KC_MINS, KC_EQL , KC_SLSH, KC_BSLS, KC_HASH, KC_DLR, KC_LPRN, KC_RPRN, KC_TRNS, KC_LEFT, KC_DOWN, KC_UP , KC_RGHT, KC_QUOT, KC_PERC, KC_CIRC, KC_LBRC, KC_RBRC, KC_TRNS, KC_AMPR, KC_TILD, KC_PLUS, KC_ASTR, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, LSFT(KC_QUOTE), LSFT(KC_MINS)), - /* Keymap 2: Numbers/Function/Motion layer + /* Numbers/Function/Motion layer * * ,-------------------------------. ,-------------------------------. * | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | @@ -108,3 +148,56 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_MS_L, KC_MS_D, KC_MS_U, KC_MS_R, KC_TRNS, KC_F11, KC_F12, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) }; + +bool get_hold_on_other_key_press(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case KC_CTL_A: + return false; + default: + return true; + } +} + +td_state_t cur_dance(qk_tap_dance_state_t *state) { + if (state->count == 1) + return TD_SINGLE_TAP; + if (state->count == 2) + return TD_DOUBLE_TAP; + else if (state->count == 3) + return TD_TRIPLE_TAP; + return TD_UNKNOWN; +} + +static td_tap_t ql_tap_state = { + .is_press_action = true, + .state = TD_NONE +}; + +void ql_finished(qk_tap_dance_state_t *state, void *user_data) { + ql_tap_state.state = cur_dance(state); + switch (ql_tap_state.state) { + case TD_SINGLE_TAP: + tap_code(KC_COMMA); + break; + case TD_DOUBLE_TAP: + tap_code(KC_COMMA); + tap_code(KC_COMMA); + break; + case TD_TRIPLE_TAP: + if (layer_state_is(_GAME)) + layer_off(_GAME); + else + layer_on(_GAME); + break; + default: + break; + } +} + +void ql_reset(qk_tap_dance_state_t *state, void *user_data) { + ql_tap_state.state = TD_NONE; +} + +qk_tap_dance_action_t tap_dance_actions[] = { + [GAME] = ACTION_TAP_DANCE_FN_ADVANCED_TIME(NULL, ql_finished, ql_reset, 275) +}; diff --git a/keyboards/gboards/gergoplex/keymaps/georgepetri/rules.mk b/keyboards/gboards/gergoplex/keymaps/georgepetri/rules.mk index e882b8008d..e4064d4932 100644 --- a/keyboards/gboards/gergoplex/keymaps/georgepetri/rules.mk +++ b/keyboards/gboards/gergoplex/keymaps/georgepetri/rules.mk @@ -15,3 +15,5 @@ VPATH += keyboards/gboards/ ifeq ($(strip $(DEBUG_MATRIX)), yes) OPT_DEFS += -DDEBUG_MATRIX endif + +TAP_DANCE_ENABLE = yes From 0b2bc8955949e21e40f5dbc888d785dcd370ca07 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Thu, 11 Nov 2021 19:02:00 +0000 Subject: [PATCH 469/595] Avoid MATRIX_*_PINS due to schema validation errors (#15123) --- keyboards/matrix/abelx/config.h | 4 ++-- keyboards/matrix/abelx/matrix.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/keyboards/matrix/abelx/config.h b/keyboards/matrix/abelx/config.h index 145bb30993..d3c6a569b1 100644 --- a/keyboards/matrix/abelx/config.h +++ b/keyboards/matrix/abelx/config.h @@ -34,7 +34,7 @@ #define GET_PORT(pp) (((pp) >> 8) & 0xFF) #define GET_PIN(pp) ((pp) & 0xFF) -#define MATRIX_ROW_PINS { \ +#define CUSTOM_MATRIX_ROW_PINS { \ DEF_PIN(TCA6424_PORT2, 7), \ DEF_PIN(TCA6424_PORT2, 6), \ DEF_PIN(TCA6424_PORT2, 0), \ @@ -42,7 +42,7 @@ DEF_PIN(TCA6424_PORT2, 4), \ DEF_PIN(TCA6424_PORT2, 5) } -#define MATRIX_COL_PINS { \ +#define CUSTOM_MATRIX_COL_PINS { \ DEF_PIN(TCA6424_PORT2, 1), \ DEF_PIN(TCA6424_PORT1, 7), \ DEF_PIN(TCA6424_PORT1, 6), \ diff --git a/keyboards/matrix/abelx/matrix.c b/keyboards/matrix/abelx/matrix.c index 56129bd0b5..d8d87b7d89 100644 --- a/keyboards/matrix/abelx/matrix.c +++ b/keyboards/matrix/abelx/matrix.c @@ -25,7 +25,7 @@ #include "tca6424.h" #include "abelx.h" -static const uint16_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; +static const uint16_t col_pins[MATRIX_COLS] = CUSTOM_MATRIX_COL_PINS; void matrix_init_custom(void) { From a2baed0ebf9d31d32478d6e35cf0a6f501e3a677 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Fri, 12 Nov 2021 01:44:35 +0000 Subject: [PATCH 470/595] Fix obsolete or unknown configuration file (#15129) --- keyboards/matrix/abelx/chconf.h | 86 ++++++++++++++++++++++++-------- keyboards/matrix/abelx/halconf.h | 14 ++++-- 2 files changed, 74 insertions(+), 26 deletions(-) diff --git a/keyboards/matrix/abelx/chconf.h b/keyboards/matrix/abelx/chconf.h index 7dc4f84a8a..2a2c8c2a92 100644 --- a/keyboards/matrix/abelx/chconf.h +++ b/keyboards/matrix/abelx/chconf.h @@ -29,7 +29,7 @@ #define CHCONF_H #define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_0_ +#define _CHIBIOS_RT_CONF_VER_6_1_ /*===========================================================================*/ /** @@ -108,21 +108,6 @@ #define CH_CFG_TIME_QUANTUM 0 #endif -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - /** * @brief Idle thread automatic spawn suppression. * @details When this option is activated the function @p chSysInit() @@ -311,6 +296,28 @@ #define CH_CFG_USE_MESSAGES_PRIORITY FALSE #endif +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#if !defined(CH_CFG_USE_DYNAMIC) +#define CH_CFG_USE_DYNAMIC FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name OSLIB options + * @{ + */ +/*===========================================================================*/ + /** * @brief Mailboxes APIs. * @details If enabled then the asynchronous messages (mailboxes) APIs are @@ -334,6 +341,21 @@ #define CH_CFG_USE_MEMCORE TRUE #endif +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#if !defined(CH_CFG_MEMCORE_SIZE) +#define CH_CFG_MEMCORE_SIZE 0 +#endif + /** * @brief Heap Allocator APIs. * @details If enabled then the memory heap allocator APIs are included @@ -382,16 +404,36 @@ #endif /** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included + * @brief Objects Caches APIs. + * @details If enabled then the objects caches APIs are included * in the kernel. * * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC TRUE +#if !defined(CH_CFG_USE_OBJ_CACHES) +#define CH_CFG_USE_OBJ_CACHES FALSE +#endif + +/** + * @brief Delegate threads APIs. + * @details If enabled then the delegate threads APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_DELEGATES) +#define CH_CFG_USE_DELEGATES FALSE +#endif + +/** + * @brief Jobs Queues APIs. + * @details If enabled then the jobs queues APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_JOBS) +#define CH_CFG_USE_JOBS FALSE #endif /** @} */ diff --git a/keyboards/matrix/abelx/halconf.h b/keyboards/matrix/abelx/halconf.h index fb5a760728..e68682e707 100644 --- a/keyboards/matrix/abelx/halconf.h +++ b/keyboards/matrix/abelx/halconf.h @@ -29,7 +29,7 @@ #define HALCONF_H #define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_0_ +#define _CHIBIOS_HAL_CONF_VER_7_1_ #include "mcuconf.h" @@ -68,6 +68,13 @@ #define HAL_USE_DAC FALSE #endif +/** + * @brief Enables the EFlash subsystem. + */ +#if !defined(HAL_USE_EFL) || defined(__DOXYGEN__) +#define HAL_USE_EFL FALSE +#endif + /** * @brief Enables the GPT subsystem. */ @@ -405,7 +412,7 @@ * buffers. */ #if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 +#define SERIAL_BUFFERS_SIZE 128 #endif /*===========================================================================*/ @@ -451,13 +458,12 @@ #define SPI_USE_CIRCULAR FALSE #endif - /** * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. * @note Disabling this option saves both code and data space. */ #if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION FALSE +#define SPI_USE_MUTUAL_EXCLUSION TRUE #endif /** From f3fa56c32a240012c7b8c13be10d0b787d849ff3 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Fri, 12 Nov 2021 07:31:40 +0000 Subject: [PATCH 471/595] gcc10 LTO - Only specify adhlns assembler options at link time (#15115) * gcc10 LTO - Only specify adhlns assembler options at link time * Default adhlns off? --- tmk_core/rules.mk | 50 ++++++++++++++++++++++++----------------------- 1 file changed, 26 insertions(+), 24 deletions(-) diff --git a/tmk_core/rules.mk b/tmk_core/rules.mk index 70ab0eb166..e657af3f43 100644 --- a/tmk_core/rules.mk +++ b/tmk_core/rules.mk @@ -81,7 +81,6 @@ endif # -f...: tuning, see GCC manual and avr-libc documentation # -Wall...: warning level # -Wa,...: tell GCC to pass this to the assembler. -# -adhlns...: create assembler listing ifeq ($(strip $(LTO_ENABLE)), yes) ifeq ($(PLATFORM),CHIBIOS) $(info Enabling LTO on ChibiOS-targeting boards is known to have a high likelihood of failure.) @@ -117,10 +116,6 @@ endif #CFLAGS += -Wundef #CFLAGS += -Wunreachable-code #CFLAGS += -Wsign-compare -GCC_VERSION := $(shell gcc --version 2>/dev/null) -ifeq ($(findstring clang, ${GCC_VERSION}),) -CFLAGS += -Wa,-adhlns=$(@:%.o=%.lst) -endif CFLAGS += $(CSTANDARD) # This fixes lots of keyboards linking errors but SHOULDN'T BE A FINAL SOLUTION @@ -133,7 +128,6 @@ CFLAGS += -fcommon # -f...: tuning, see GCC manual and avr-libc documentation # -Wall...: warning level # -Wa,...: tell GCC to pass this to the assembler. -# -adhlns...: create assembler listing ifeq ($(strip $(DEBUG_ENABLE)),yes) CXXFLAGS += -g$(DEBUG) endif @@ -152,28 +146,10 @@ endif #CXXFLAGS += -Wstrict-prototypes #CXXFLAGS += -Wunreachable-code #CXXFLAGS += -Wsign-compare -ifeq ($(findstring clang, ${GCC_VERSION}),) -CXXFLAGS += -Wa,-adhlns=$(@:%.o=%.lst) -endif #CXXFLAGS += $(CSTANDARD) #---------------- Assembler Options ---------------- -# -Wa,...: tell GCC to pass this to the assembler. -# -adhlns: create listing -# -gstabs: have the assembler create line number information; note that -# for use in COFF files, additional information about filenames -# and function names needs to be present in the assembler source -# files -- see avr-libc docs [FIXME: not yet described there] -# -listing-cont-lines: Sets the maximum number of continuation lines of hex -# dump that will be displayed for a given single line of source input. ASFLAGS += $(ADEFS) -ifeq ($(findstring clang, ${GCC_VERSION}),) -ifeq ($(strip $(DEBUG_ENABLE)),yes) - ASFLAGS += -Wa,-adhlns=$(@:%.o=%.lst),-gstabs,--listing-cont-lines=100 -else - ASFLAGS += -Wa,-adhlns=$(@:%.o=%.lst),--listing-cont-lines=100 -endif -endif ifeq ($(VERBOSE_AS_CMD),yes) ASFLAGS += -v endif @@ -230,6 +206,32 @@ LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB) # You can give EXTRALDFLAGS at 'make' command line. LDFLAGS += $(EXTRALDFLAGS) +#---------------- Assembler Listings ---------------- +# -Wa,...: tell GCC to pass this to the assembler. +# -adhlns: create listing +# -gstabs: have the assembler create line number information; note that +# for use in COFF files, additional information about filenames +# and function names needs to be present in the assembler source +# files -- see avr-libc docs [FIXME: not yet described there] +# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# dump that will be displayed for a given single line of source input. + +ADHLNS_ENABLE ?= no +ifeq ($(ADHLNS_ENABLE),yes) + # Avoid "Options to '-Xassembler' do not match" - only specify assembler options at LTO link time + ifeq ($(strip $(LTO_ENABLE)), yes) + LDFLAGS += -Wa,-adhlns=$(BUILD_DIR)/$(TARGET).lst + else + CFLAGS += -Wa,-adhlns=$(@:%.o=%.lst) + CXXFLAGS += -Wa,-adhlns=$(@:%.o=%.lst) + ifeq ($(strip $(DEBUG_ENABLE)),yes) + ASFLAGS = -Wa,-adhlns=$(@:%.o=%.lst),-gstabs,--listing-cont-lines=100 + else + ASFLAGS = -Wa,-adhlns=$(@:%.o=%.lst),--listing-cont-lines=100 + endif + endif +endif + # Define programs and commands. SHELL = sh REMOVE = rm -f From 7c2b2c81b53d055c66a15bd9ced92f548ca28ad6 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Thu, 11 Nov 2021 23:33:16 -0800 Subject: [PATCH 472/595] [Docs] Codify not using code from other keyboards in PRs (#15128) * [Docs] Codify not using code from other keyboards in PRs * add additional comments --- docs/pr_checklist.md | 3 +++ 1 file changed, 3 insertions(+) diff --git a/docs/pr_checklist.md b/docs/pr_checklist.md index 817ed22d41..94c62c6535 100644 --- a/docs/pr_checklist.md +++ b/docs/pr_checklist.md @@ -101,6 +101,9 @@ https://github.com/qmk/qmk_firmware/pulls?q=is%3Apr+is%3Aclosed+label%3Akeyboard - submitters can have a personal (or bells-and-whistles) keymap showcasing capabilities in the same PR but it shouldn't be embedded in the 'default' keymap - submitters can also have a "manufacturer-matching" keymap that mirrors existing functionality of the commercial product, if porting an existing board - Do not include VIA json files in the PR. These do not belong in the QMK repository as they are not used by QMK firmware -- they belong in the [VIA Keyboard Repo](https://github.com/the-via/keyboards) +- Do not include source files from another keyboard or vendors keyboard folder. Including core files is fine. + - For instance, only `wilba_tech` boards using be including `keyboards/wilba_tech/wt_main.c` and `keyboards/wilba_tech/wt_rgb_backlight.c`. But including `drivers/sensors/pmw3360.c` is absolutely fine. + - Code that needs to be used by multiple boards is a candidate for core code changes, and should be separated out. Also, specific to ChibiOS: - **strong** preference to using existing ChibiOS board definitions. From 051bde9c63cbfa5c5fbebc53daa59ce30fb0cebd Mon Sep 17 00:00:00 2001 From: Josh Johnson Date: Sat, 13 Nov 2021 03:37:54 +1100 Subject: [PATCH 473/595] [Keyboard] Add Chalice Support (#15106) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- keyboards/chalice/chalice.c | 18 +++++ keyboards/chalice/chalice.h | 60 ++++++++++++++++ keyboards/chalice/config.h | 66 ++++++++++++++++++ keyboards/chalice/info.json | 79 ++++++++++++++++++++++ keyboards/chalice/keymaps/default/keymap.c | 55 +++++++++++++++ keyboards/chalice/keymaps/via/keymap.c | 55 +++++++++++++++ keyboards/chalice/keymaps/via/rules.mk | 1 + keyboards/chalice/readme.md | 25 +++++++ keyboards/chalice/rules.mk | 21 ++++++ 9 files changed, 380 insertions(+) create mode 100644 keyboards/chalice/chalice.c create mode 100644 keyboards/chalice/chalice.h create mode 100644 keyboards/chalice/config.h create mode 100644 keyboards/chalice/info.json create mode 100644 keyboards/chalice/keymaps/default/keymap.c create mode 100644 keyboards/chalice/keymaps/via/keymap.c create mode 100644 keyboards/chalice/keymaps/via/rules.mk create mode 100644 keyboards/chalice/readme.md create mode 100644 keyboards/chalice/rules.mk diff --git a/keyboards/chalice/chalice.c b/keyboards/chalice/chalice.c new file mode 100644 index 0000000000..1d7cc12228 --- /dev/null +++ b/keyboards/chalice/chalice.c @@ -0,0 +1,18 @@ +/* Copyright 2020 null-ll + * Copyright 2021 Jels, Josh Johnson + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "chalice.h" diff --git a/keyboards/chalice/chalice.h b/keyboards/chalice/chalice.h new file mode 100644 index 0000000000..a0bc0026f6 --- /dev/null +++ b/keyboards/chalice/chalice.h @@ -0,0 +1,60 @@ +/* Copyright 2020 null-ll + * Copyright 2021 Jels, Josh Johnson + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#define ____ KC_NO + +#include "quantum.h" + +#define LAYOUT_default( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, \ + K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K214, \ + K401, K402, K404, K406, K408, K410, K411, K412, K413, K314 \ +) { \ + { K000, K002, K004, K006, K008, K010, K012 }, \ + { K001, K003, K005, K007, K009, K011, K013 }, \ + { K100, K102, K104, K106, K108, K110, K112 }, \ + { K101, K103, K105, K107, K109, K111, K113 }, \ + { K200, K202, K204, K206, K208, K210, K014 }, \ + { K201, K203, K205, K207, K209, K211, K114 }, \ + { K301, K303, K305, K307, K309, K311, K212 }, \ + { K302, K304, K306, K308, K310, K312, K213 }, \ + { K401, ____, K404, K408, K411, K413, K313 }, \ + { ____, K402, K406, K410, K412, K314, K214 } \ +} + +#define LAYOUT_split_bs( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K403, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, \ + K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K214, \ + K401, K402, K404, K406, K408, K410, K411, K412, K413, K314 \ +) { \ + { K000, K002, K004, K006, K008, K010, K012 }, \ + { K001, K003, K005, K007, K009, K011, K013 }, \ + { K100, K102, K104, K106, K108, K110, K112 }, \ + { K101, K103, K105, K107, K109, K111, K113 }, \ + { K200, K202, K204, K206, K208, K210, K014 }, \ + { K201, K203, K205, K207, K209, K211, K114 }, \ + { K301, K303, K305, K307, K309, K311, K212 }, \ + { K302, K304, K306, K308, K310, K312, K213 }, \ + { K401, K403, K404, K408, K411, K413, K313 }, \ + { ____, K402, K406, K410, K412, K314, K214 } \ +} diff --git a/keyboards/chalice/config.h b/keyboards/chalice/config.h new file mode 100644 index 0000000000..75c34cacd0 --- /dev/null +++ b/keyboards/chalice/config.h @@ -0,0 +1,66 @@ +/* Copyright 2020 null-ll + * Copyright 2021 Jels, Josh Johnson + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "config_common.h" + +#define VENDOR_ID 0x6A6A +#define PRODUCT_ID 0x000C +#define DEVICE_VER 0x0001 +#define MANUFACTURER CustomKBD +#define PRODUCT Chalice + +/* key matrix size */ +#define MATRIX_ROWS 10 +#define MATRIX_COLS 7 + +#define MATRIX_ROW_PINS {F4, D1, D0, F5, D4, F6, B4, B5, B2, B6} +#define MATRIX_COL_PINS {F7, C6, B1, D2, E6, B3, D7} + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +#define RGB_DI_PIN D3 + +#ifdef RGBLIGHT_ENABLE + #define RGBLED_NUM 14 + #define RGBLIGHT_SLEEP +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* Bootmagic Lite key configuration */ +#define BOOTMAGIC_LITE_ROW 0 +#define BOOTMAGIC_LITE_COLUMN 0 + diff --git a/keyboards/chalice/info.json b/keyboards/chalice/info.json new file mode 100644 index 0000000000..68bd710a37 --- /dev/null +++ b/keyboards/chalice/info.json @@ -0,0 +1,79 @@ +{ + "keyboard_name": "Chalice", + "url": "https://customkbd.com/products/chalice-pre-order", + "maintainer": "CustomKBD", + "layouts": { + "LAYOUT_default": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"~", "x":1.5, "y":0}, + {"label":"!", "x":2.5, "y":0}, + {"label":"@", "x":3.5, "y":0}, + {"label":"#", "x":4.5, "y":0}, + {"label":"$", "x":5.5, "y":0}, + {"label":"%", "x":6.5, "y":0}, + {"label":"^", "x":7.5, "y":0}, + {"label":"&", "x":10.5, "y":0}, + {"label":"*", "x":11.5, "y":0}, + {"label":"(", "x":12.5, "y":0}, + {"label":")", "x":13.5, "y":0}, + {"label":"_", "x":14.5, "y":0}, + {"label":"+", "x":15.5, "y":0}, + {"label":"Backspace", "x":16.5, "y":0, "w":2}, + {"label":"Tab", "x":1.5, "y":1, "w":1.5}, + {"label":"Q", "x":3, "y":1}, + {"label":"W", "x":4, "y":1}, + {"label":"E", "x":5, "y":1}, + {"label":"R", "x":6, "y":1}, + {"label":"T", "x":7, "y":1}, + {"label":"Y", "x":10, "y":1}, + {"label":"U", "x":11, "y":1}, + {"label":"I", "x":12, "y":1}, + {"label":"O", "x":13, "y":1}, + {"label":"P", "x":14, "y":1}, + {"label":"{", "x":15, "y":1}, + {"label":"}", "x":16, "y":1}, + {"label":"|", "x":17, "y":1, "w":1.5}, + {"label":"Mute", "x":19, "y":0.5}, + {"label":"Delete", "x":0, "y":2}, + {"label":"Caps Lock", "x":1.5, "y":2, "w":1.75}, + {"label":"A", "x":3.25, "y":2}, + {"label":"S", "x":4.25, "y":2}, + {"label":"D", "x":5.25, "y":2}, + {"label":"F", "x":6.25, "y":2}, + {"label":"G", "x":7.25, "y":2}, + {"label":"H", "x":10.25, "y":2}, + {"label":"J", "x":11.25, "y":2}, + {"label":"K", "x":12.25, "y":2}, + {"label":"L", "x":13.25, "y":2}, + {"label":":", "x":14.25, "y":2}, + {"label":"\"", "x":15.25, "y":2}, + {"label":"Enter", "x":16.25, "y":2, "w":2.25}, + {"label":"Shift", "x":1.5, "y":3, "w":2.25}, + {"label":"Z", "x":3.75, "y":3}, + {"label":"X", "x":4.75, "y":3}, + {"label":"C", "x":5.75, "y":3}, + {"label":"V", "x":6.75, "y":3}, + {"label":"B", "x":7.75, "y":3}, + {"label":"B", "x":9.75, "y":3}, + {"label":"N", "x":10.75, "y":3}, + {"label":"M", "x":11.75, "y":3}, + {"label":"<", "x":12.75, "y":3}, + {"label":">", "x":13.75, "y":3}, + {"label":"?", "x":14.75, "y":3}, + {"label":"Shift", "x":15.75, "y":3, "w":1.75}, + {"label":"Up", "x":17.75, "y":3.25}, + {"label":"Ctrl", "x":1.5, "y":4, "w":1.5}, + {"label":"Alt", "x":4.5, "y":4, "w":1.5}, + {"label":"Space", "x":6, "y":4, "w":2}, + {"label":"Fn", "x":8, "y":4}, + {"label":"Space", "x":9.75, "y":4, "w":2.75}, + {"label":"Alt", "x":12.5, "y":4, "w":1.5}, + {"label":"Ctrl", "x":15, "y":4, "w":1.5}, + {"label":"Left", "x":16.75, "y":4.25}, + {"label":"Down", "x":17.75, "y":4.25}, + {"label":"Right", "x":18.75, "y":4.25} + ] + } + } +} diff --git a/keyboards/chalice/keymaps/default/keymap.c b/keyboards/chalice/keymaps/default/keymap.c new file mode 100644 index 0000000000..c33ebfabd2 --- /dev/null +++ b/keyboards/chalice/keymaps/default/keymap.c @@ -0,0 +1,55 @@ +/* Copyright 2020 null-ll + * Copyright 2021 Jels, Josh Johnson + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_default( + KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_INS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_DEL, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LALT, KC_SPC, MO(1), KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT + ), + + + [1] = LAYOUT_default( + RESET, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, + _______, _______, RGB_TOG, RGB_HUD, RGB_HUI, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, RGB_MOD, RGB_SAD, RGB_SAI, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, RGB_RMOD,RGB_VAD, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGUP, + _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END + ), + + [2] = LAYOUT_default( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [3] = LAYOUT_default( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; \ No newline at end of file diff --git a/keyboards/chalice/keymaps/via/keymap.c b/keyboards/chalice/keymaps/via/keymap.c new file mode 100644 index 0000000000..c33ebfabd2 --- /dev/null +++ b/keyboards/chalice/keymaps/via/keymap.c @@ -0,0 +1,55 @@ +/* Copyright 2020 null-ll + * Copyright 2021 Jels, Josh Johnson + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_default( + KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_INS, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_DEL, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LALT, KC_SPC, MO(1), KC_SPC, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT + ), + + + [1] = LAYOUT_default( + RESET, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, + _______, _______, RGB_TOG, RGB_HUD, RGB_HUI, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, RGB_MOD, RGB_SAD, RGB_SAI, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, RGB_RMOD,RGB_VAD, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGUP, + _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END + ), + + [2] = LAYOUT_default( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + + [3] = LAYOUT_default( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; \ No newline at end of file diff --git a/keyboards/chalice/keymaps/via/rules.mk b/keyboards/chalice/keymaps/via/rules.mk new file mode 100644 index 0000000000..036bd6d1c3 --- /dev/null +++ b/keyboards/chalice/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes \ No newline at end of file diff --git a/keyboards/chalice/readme.md b/keyboards/chalice/readme.md new file mode 100644 index 0000000000..ebfaa3cbd1 --- /dev/null +++ b/keyboards/chalice/readme.md @@ -0,0 +1,25 @@ +# Chalice + +A Cheap Alice, powered by a Pro-Micro + +* Keyboard Maintainer: [CustomKBD](https://github.com/customkbd/) +* Hardware Supported: Pro-Micro (or equivalent - Sea Micro, Elite-C etc.) +* Hardware Availability: [CustomKBD](https://customkbd.com/products/chalice-pre-order) + +Make example for this keyboard (after setting up your build environment): + + make chalice:default + +Flashing example for this keyboard: + + make chalice:default:flash + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down Escape and plug in the keyboard. +* **Physical reset button**: Briefly press the reset button below the pro-micro. +* **Keycode in layout**: The `RESET` key can be found by holding `FUNC` in between the space bars and pressing `ESC`. + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/chalice/rules.mk b/keyboards/chalice/rules.mk new file mode 100644 index 0000000000..cf5d2e685d --- /dev/null +++ b/keyboards/chalice/rules.mk @@ -0,0 +1,21 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output From 9e84be7821e617752990c850ca3a3fa199b8ea15 Mon Sep 17 00:00:00 2001 From: Albert Y <76888457+filterpaper@users.noreply.github.com> Date: Sat, 13 Nov 2021 00:38:21 +0800 Subject: [PATCH 474/595] [Keyboard] Update a_dux info.json (#15126) Co-authored-by: filterpaper --- keyboards/a_dux/info.json | 44 +++++++++++++++++++-------------------- 1 file changed, 22 insertions(+), 22 deletions(-) diff --git a/keyboards/a_dux/info.json b/keyboards/a_dux/info.json index e52895a58f..f1869f7332 100644 --- a/keyboards/a_dux/info.json +++ b/keyboards/a_dux/info.json @@ -5,47 +5,47 @@ "layouts": { "LAYOUT": { "layout": [ - {"x": 0, "y": 0.93}, + {"x": 0, "y": 1.33}, {"x": 1, "y": 0.31}, {"x": 2, "y": 0}, {"x": 3, "y": 0.28}, {"x": 4, "y": 0.42}, - {"x": 7, "y": 0.42}, - {"x": 8, "y": 0.28}, - {"x": 9, "y": 0}, - {"x": 10, "y": 0.31}, - {"x": 11, "y": 0.93}, + {"x": 8, "y": 0.42}, + {"x": 9, "y": 0.28}, + {"x": 10, "y": 0}, + {"x": 11, "y": 0.31}, + {"x": 12, "y": 1.33}, - {"x": 0, "y": 1.93}, + {"x": 0, "y": 2.33}, {"x": 1, "y": 1.31}, {"x": 2, "y": 1}, {"x": 3, "y": 1.28}, {"x": 4, "y": 1.42}, - {"x": 7, "y": 1.42}, - {"x": 8, "y": 1.28}, - {"x": 9, "y": 1}, - {"x": 10, "y": 1.31}, - {"x": 11, "y": 1.93}, + {"x": 8, "y": 1.42}, + {"x": 9, "y": 1.28}, + {"x": 10, "y": 1}, + {"x": 11, "y": 1.31}, + {"x": 12, "y": 2.33}, - {"x": 0, "y": 2.93}, + {"x": 0, "y": 3.33}, {"x": 1, "y": 2.31}, {"x": 2, "y": 2}, {"x": 3, "y": 2.28}, {"x": 4, "y": 2.42}, - {"x": 7, "y": 2.42}, - {"x": 8, "y": 2.28}, - {"x": 9, "y": 2}, - {"x": 10, "y": 2.31}, - {"x": 11, "y": 2.93}, + {"x": 8, "y": 2.42}, + {"x": 9, "y": 2.28}, + {"x": 10, "y": 2}, + {"x": 11, "y": 2.31}, + {"x": 12, "y": 3.33}, - {"x": 3.5, "y": 3.75}, - {"x": 4.5, "y": 4}, + {"x": 4, "y": 3.75}, + {"x": 5, "y": 4}, - {"x": 6.5, "y": 4}, - {"x": 7.5, "y": 3.75} + {"x": 7, "y": 4}, + {"x": 8, "y": 3.75} ] } } From 463cb40e16006acd31ddbb6210d2939dfb5838f2 Mon Sep 17 00:00:00 2001 From: "WiZ.GG" <39291381+wizard-gg@users.noreply.github.com> Date: Fri, 12 Nov 2021 20:09:04 +0330 Subject: [PATCH 475/595] [Keyboard] Add JadooKB JKB2 (#15036) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- keyboards/jadookb/jkb2/config.h | 32 +++++++++++++++++ keyboards/jadookb/jkb2/info.json | 10 ++++++ keyboards/jadookb/jkb2/jkb2.c | 16 +++++++++ keyboards/jadookb/jkb2/jkb2.h | 25 ++++++++++++++ .../jadookb/jkb2/keymaps/default/keymap.c | 23 +++++++++++++ keyboards/jadookb/jkb2/keymaps/via/config.h | 20 +++++++++++ keyboards/jadookb/jkb2/keymaps/via/keymap.c | 34 +++++++++++++++++++ keyboards/jadookb/jkb2/keymaps/via/rules.mk | 2 ++ keyboards/jadookb/jkb2/readme.md | 23 +++++++++++++ keyboards/jadookb/jkb2/rules.mk | 21 ++++++++++++ 10 files changed, 206 insertions(+) create mode 100644 keyboards/jadookb/jkb2/config.h create mode 100644 keyboards/jadookb/jkb2/info.json create mode 100644 keyboards/jadookb/jkb2/jkb2.c create mode 100644 keyboards/jadookb/jkb2/jkb2.h create mode 100644 keyboards/jadookb/jkb2/keymaps/default/keymap.c create mode 100644 keyboards/jadookb/jkb2/keymaps/via/config.h create mode 100644 keyboards/jadookb/jkb2/keymaps/via/keymap.c create mode 100644 keyboards/jadookb/jkb2/keymaps/via/rules.mk create mode 100644 keyboards/jadookb/jkb2/readme.md create mode 100644 keyboards/jadookb/jkb2/rules.mk diff --git a/keyboards/jadookb/jkb2/config.h b/keyboards/jadookb/jkb2/config.h new file mode 100644 index 0000000000..ac5808f236 --- /dev/null +++ b/keyboards/jadookb/jkb2/config.h @@ -0,0 +1,32 @@ + /* Copyright 2021 Wizard-GG + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once +#include "config_common.h" + +#define VENDOR_ID 0x4A4B // "JK" +#define PRODUCT_ID 0x3225 // "2%" +#define DEVICE_VER 0x0001 +#define MANUFACTURER JadooKB +#define PRODUCT JKB2 + +#define MATRIX_ROWS 1 +#define MATRIX_COLS 2 + +#define MATRIX_ROW_PINS { B1 } +#define MATRIX_COL_PINS { B3 ,B2} +#define UNUSED_PINS + +#define DIODE_DIRECTION COL2ROW diff --git a/keyboards/jadookb/jkb2/info.json b/keyboards/jadookb/jkb2/info.json new file mode 100644 index 0000000000..ed818d6412 --- /dev/null +++ b/keyboards/jadookb/jkb2/info.json @@ -0,0 +1,10 @@ +{ + "keyboard_name": "jkb2", + "url": "https://jadookb.com/", + "maintainer": "Wizard-GG", + "layouts": { + "LAYOUT": { + "layout": [ {"label":"z","x": 0, "y": 0 }, {"label":"x","x": 1, "y": 0 }] + } + } +} diff --git a/keyboards/jadookb/jkb2/jkb2.c b/keyboards/jadookb/jkb2/jkb2.c new file mode 100644 index 0000000000..3ac90e97eb --- /dev/null +++ b/keyboards/jadookb/jkb2/jkb2.c @@ -0,0 +1,16 @@ + /* Copyright 2021 Wizard-GG + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "jkb2.h" diff --git a/keyboards/jadookb/jkb2/jkb2.h b/keyboards/jadookb/jkb2/jkb2.h new file mode 100644 index 0000000000..1bddef45de --- /dev/null +++ b/keyboards/jadookb/jkb2/jkb2.h @@ -0,0 +1,25 @@ + /* Copyright 2021 Wizard-GG + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" + +#define LAYOUT( \ + K01, K02 \ +) \ +{ \ + { K01, K02 }, \ +} diff --git a/keyboards/jadookb/jkb2/keymaps/default/keymap.c b/keyboards/jadookb/jkb2/keymaps/default/keymap.c new file mode 100644 index 0000000000..f2470c0833 --- /dev/null +++ b/keyboards/jadookb/jkb2/keymaps/default/keymap.c @@ -0,0 +1,23 @@ + /* Copyright 2021 Wizard-GG + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( + KC_Z, KC_X + ) +}; diff --git a/keyboards/jadookb/jkb2/keymaps/via/config.h b/keyboards/jadookb/jkb2/keymaps/via/config.h new file mode 100644 index 0000000000..ecd00aced4 --- /dev/null +++ b/keyboards/jadookb/jkb2/keymaps/via/config.h @@ -0,0 +1,20 @@ + + /* Copyright 2021 Wizard-GG + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#define USB_POLLING_INTERVAL_MS 1 +#define QMK_KEYS_PER_SCAN 4 diff --git a/keyboards/jadookb/jkb2/keymaps/via/keymap.c b/keyboards/jadookb/jkb2/keymaps/via/keymap.c new file mode 100644 index 0000000000..fc10bc32bb --- /dev/null +++ b/keyboards/jadookb/jkb2/keymaps/via/keymap.c @@ -0,0 +1,34 @@ + + /* Copyright 2021 Wizard-GG + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT( + KC_Z, KC_X + ), + [1] = LAYOUT( + _______, _______ + ), + [2] = LAYOUT( + _______, _______ + ), + [3] = LAYOUT( + _______, _______ + ) +}; diff --git a/keyboards/jadookb/jkb2/keymaps/via/rules.mk b/keyboards/jadookb/jkb2/keymaps/via/rules.mk new file mode 100644 index 0000000000..36b7ba9cbc --- /dev/null +++ b/keyboards/jadookb/jkb2/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/jadookb/jkb2/readme.md b/keyboards/jadookb/jkb2/readme.md new file mode 100644 index 0000000000..09f01a6cde --- /dev/null +++ b/keyboards/jadookb/jkb2/readme.md @@ -0,0 +1,23 @@ +# JKB2 osu! Macropad + +![JKB2](https://i.imgur.com/9f0HETUh.jpg) + +A 2% hotswap osu! Macropad from JadooKB. + +* Keyboard Maintainer: [Wizard-GG](https://github.com/wizard-gg) +* Hardware Supported: JKB2 OSU +* Hardware Availability: [Jadoo Keyboard](https://jadookb.com/jkb2) + +Make example for this keyboard (after setting up your build environment): + + make jadookb/jkb2:default + +Flashing example for this keyboard: + + make jadookb/jkb2:default:flash + +To reset the board into bootloader mode, do the following step: + +* Hold the **left** key while connecting the USB cable + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/jadookb/jkb2/rules.mk b/keyboards/jadookb/jkb2/rules.mk new file mode 100644 index 0000000000..10e9616d6f --- /dev/null +++ b/keyboards/jadookb/jkb2/rules.mk @@ -0,0 +1,21 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output From bd3597825409e13096e2a444ad224f07321cebbf Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Fri, 12 Nov 2021 21:19:40 +0000 Subject: [PATCH 476/595] matrix/abelx - Update ChibiOS conf files (#15130) * Fix obsolete or unknown configuration file * use qmk chibios-confmigrate --- keyboards/matrix/abelx/chconf.h | 763 +------------------------------ keyboards/matrix/abelx/halconf.h | 542 +--------------------- keyboards/matrix/abelx/mcuconf.h | 64 +-- 3 files changed, 70 insertions(+), 1299 deletions(-) diff --git a/keyboards/matrix/abelx/chconf.h b/keyboards/matrix/abelx/chconf.h index 2a2c8c2a92..0d6c21a964 100644 --- a/keyboards/matrix/abelx/chconf.h +++ b/keyboards/matrix/abelx/chconf.h @@ -1,756 +1,27 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_1_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 2 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM TRUE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name OSLIB options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS TRUE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif - -/** - * @brief Objects Caches APIs. - * @details If enabled then the objects caches APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_CACHES) -#define CH_CFG_USE_OBJ_CACHES FALSE -#endif - -/** - * @brief Delegate threads APIs. - * @details If enabled then the delegate threads APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_DELEGATES) -#define CH_CFG_USE_DELEGATES FALSE -#endif - -/** - * @brief Jobs Queues APIs. - * @details If enabled then the jobs queues APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_JOBS) -#define CH_CFG_USE_JOBS FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY TRUE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS FALSE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. +/* Copyright 2021 QMK * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK FALSE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS FALSE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. +/* + * This file was auto-generated by: + * `qmk chibios-confmigrate -i keyboards/matrix/abelx/chconf.h -r platforms/chibios/boards/common/configs/chconf.h` */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} -/** @} */ +#pragma once -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ +#define CH_CFG_ST_FREQUENCY 10000 -#endif /* CHCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/matrix/abelx/halconf.h b/keyboards/matrix/abelx/halconf.h index e68682e707..6fcfd84f3a 100644 --- a/keyboards/matrix/abelx/halconf.h +++ b/keyboards/matrix/abelx/halconf.h @@ -1,531 +1,31 @@ -/* - ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. +/* Copyright 2020 QMK * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_1_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EFlash subsystem. - */ -#if !defined(HAL_USE_EFL) || defined(__DOXYGEN__) -#define HAL_USE_EFL FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C TRUE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC TRUE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART TRUE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE TRUE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS TRUE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING TRUE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 128 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. +/* + * This file was auto-generated by: + * `qmk chibios-confmigrate -i keyboards/matrix/abelx/halconf.h -r platforms/chibios/boards/common/configs/halconf.h` */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ +#pragma once -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ +#define HAL_USE_I2C TRUE -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif +#define HAL_USE_RTC TRUE -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif +#define SERIAL_USB_BUFFERS_SIZE 256 -#endif /* HALCONF_H */ +#include_next -/** @} */ diff --git a/keyboards/matrix/abelx/mcuconf.h b/keyboards/matrix/abelx/mcuconf.h index e26b2823f9..a22ce51c4c 100644 --- a/keyboards/matrix/abelx/mcuconf.h +++ b/keyboards/matrix/abelx/mcuconf.h @@ -32,11 +32,15 @@ */ #define STM32F4xx_MCUCONF +#define STM32F411_MCUCONF /* * HAL driver system settings. */ #define STM32_NO_INIT FALSE +#define STM32_PVD_ENABLE FALSE +#define STM32_PLS STM32_PLS_LEV0 +#define STM32_BKPRAM_ENABLE FALSE #define STM32_HSI_ENABLED TRUE #define STM32_LSI_ENABLED TRUE #define STM32_HSE_ENABLED TRUE @@ -60,9 +64,6 @@ #define STM32_I2SSRC STM32_I2SSRC_CKIN #define STM32_PLLI2SN_VALUE 192 #define STM32_PLLI2SR_VALUE 5 -#define STM32_PVD_ENABLE FALSE -#define STM32_PLS STM32_PLS_LEV0 -#define STM32_BKPRAM_ENABLE FALSE /* * IRQ system settings. @@ -82,6 +83,19 @@ #define STM32_IRQ_EXTI21_PRIORITY 15 #define STM32_IRQ_EXTI22_PRIORITY 15 +#define STM32_IRQ_TIM1_BRK_TIM9_PRIORITY 7 +#define STM32_IRQ_TIM1_UP_TIM10_PRIORITY 7 +#define STM32_IRQ_TIM1_TRGCO_TIM11_PRIORITY 7 +#define STM32_IRQ_TIM1_CC_PRIORITY 7 +#define STM32_IRQ_TIM2_PRIORITY 7 +#define STM32_IRQ_TIM3_PRIORITY 7 +#define STM32_IRQ_TIM4_PRIORITY 7 +#define STM32_IRQ_TIM5_PRIORITY 7 + +#define STM32_IRQ_USART1_PRIORITY 12 +#define STM32_IRQ_USART2_PRIORITY 12 +#define STM32_IRQ_USART6_PRIORITY 12 + /* * ADC driver system settings. */ @@ -101,14 +115,8 @@ #define STM32_GPT_USE_TIM4 TRUE #define STM32_GPT_USE_TIM5 FALSE #define STM32_GPT_USE_TIM9 FALSE +#define STM32_GPT_USE_TIM10 FALSE #define STM32_GPT_USE_TIM11 FALSE -#define STM32_GPT_TIM1_IRQ_PRIORITY 7 -#define STM32_GPT_TIM2_IRQ_PRIORITY 7 -#define STM32_GPT_TIM3_IRQ_PRIORITY 7 -#define STM32_GPT_TIM4_IRQ_PRIORITY 7 -#define STM32_GPT_TIM5_IRQ_PRIORITY 7 -#define STM32_GPT_TIM9_IRQ_PRIORITY 7 -#define STM32_GPT_TIM11_IRQ_PRIORITY 7 /* * I2C driver system settings. @@ -155,12 +163,8 @@ #define STM32_ICU_USE_TIM4 FALSE #define STM32_ICU_USE_TIM5 FALSE #define STM32_ICU_USE_TIM9 FALSE -#define STM32_ICU_TIM1_IRQ_PRIORITY 7 -#define STM32_ICU_TIM2_IRQ_PRIORITY 7 -#define STM32_ICU_TIM3_IRQ_PRIORITY 7 -#define STM32_ICU_TIM4_IRQ_PRIORITY 7 -#define STM32_ICU_TIM5_IRQ_PRIORITY 7 -#define STM32_ICU_TIM9_IRQ_PRIORITY 7 +#define STM32_ICU_USE_TIM10 FALSE +#define STM32_ICU_USE_TIM11 FALSE /* * PWM driver system settings. @@ -172,12 +176,16 @@ #define STM32_PWM_USE_TIM4 FALSE #define STM32_PWM_USE_TIM5 FALSE #define STM32_PWM_USE_TIM9 FALSE -#define STM32_PWM_TIM1_IRQ_PRIORITY 7 -#define STM32_PWM_TIM2_IRQ_PRIORITY 7 -#define STM32_PWM_TIM3_IRQ_PRIORITY 7 -#define STM32_PWM_TIM4_IRQ_PRIORITY 7 -#define STM32_PWM_TIM5_IRQ_PRIORITY 7 -#define STM32_PWM_TIM9_IRQ_PRIORITY 7 +#define STM32_PWM_USE_TIM10 FALSE +#define STM32_PWM_USE_TIM11 FALSE + +/* + * RTC driver system settings. + */ +#define STM32_RTC_PRESA_VALUE 32 +#define STM32_RTC_PRESS_VALUE 1024 +#define STM32_RTC_CR_INIT 0 +#define STM32_RTC_TAMPCR_INIT 0 /* * SERIAL driver system settings. @@ -185,9 +193,6 @@ #define STM32_SERIAL_USE_USART1 FALSE #define STM32_SERIAL_USE_USART2 FALSE #define STM32_SERIAL_USE_USART6 FALSE -#define STM32_SERIAL_USART1_PRIORITY 12 -#define STM32_SERIAL_USART2_PRIORITY 12 -#define STM32_SERIAL_USART6_PRIORITY 12 /* * SPI driver system settings. @@ -218,7 +223,7 @@ /* * UART driver system settings. */ -#define STM32_UART_USE_USART1 TRUE +#define STM32_UART_USE_USART1 FALSE #define STM32_UART_USE_USART2 FALSE #define STM32_UART_USE_USART6 FALSE #define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 5) @@ -227,9 +232,6 @@ #define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6) #define STM32_UART_USART6_RX_DMA_STREAM STM32_DMA_STREAM_ID(2, 2) #define STM32_UART_USART6_TX_DMA_STREAM STM32_DMA_STREAM_ID(2, 7) -#define STM32_UART_USART1_IRQ_PRIORITY 12 -#define STM32_UART_USART2_IRQ_PRIORITY 12 -#define STM32_UART_USART6_IRQ_PRIORITY 12 #define STM32_UART_USART1_DMA_PRIORITY 0 #define STM32_UART_USART2_DMA_PRIORITY 0 #define STM32_UART_USART6_DMA_PRIORITY 0 @@ -241,9 +243,7 @@ #define STM32_USB_USE_OTG1 TRUE #define STM32_USB_OTG1_IRQ_PRIORITY 14 #define STM32_USB_OTG1_RX_FIFO_SIZE 512 -#define STM32_USB_OTG_THREAD_PRIO LOWPRIO -#define STM32_USB_OTG_THREAD_STACK_SIZE 128 -#define STM32_USB_OTGFIFO_FILL_BASEPRI 0 +#define STM32_USB_HOST_WAKEUP_DURATION 2 /* * WDG driver system settings. From 57f63e43d862d3c36ee1e530920f7ee40e9713a2 Mon Sep 17 00:00:00 2001 From: Albert Y <76888457+filterpaper@users.noreply.github.com> Date: Sat, 13 Nov 2021 06:14:28 +0800 Subject: [PATCH 477/595] [Docs] Correct logic of tap hold statement (#14992) Co-authored-by: filterpaper --- docs/mod_tap.md | 23 ++++++++++------------- 1 file changed, 10 insertions(+), 13 deletions(-) diff --git a/docs/mod_tap.md b/docs/mod_tap.md index b69500f9c9..dc11b0dea9 100644 --- a/docs/mod_tap.md +++ b/docs/mod_tap.md @@ -83,32 +83,29 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { ### Changing hold function -Likewise, the same custom code can also be used to intercept the hold function to send custom user key code. The following example uses `LT(0, kc)` (layer-tap key with no practical use because layer 0 is always active) to add cut, copy and paste function to X,C and V keys when they are held down: +Likewise, similar custom code can also be used to intercept the hold function to send custom user key code. The following example uses `LT(0, kc)` (layer-tap key with no practical use because layer 0 is always active) to add cut, copy and paste function to X,C and V keys when they are held down: ```c bool process_record_user(uint16_t keycode, keyrecord_t *record) { switch (keycode) { case LT(0,KC_X): - if (record->tap.count && record->event.pressed) { - return true; // Return true for normal processing of tap keycode - } else if (record->event.pressed) { + if (!record->tap.count && record->event.pressed) { tap_code16(C(KC_X)); // Intercept hold function to send Ctrl-X + return false; } - return false; + return true; // Return true for normal processing of tap keycode case LT(0,KC_C): - if (record->tap.count && record->event.pressed) { - return true; // Return true for normal processing of tap keycode - } else if (record->event.pressed) { + if (!record->tap.count && record->event.pressed) { tap_code16(C(KC_C)); // Intercept hold function to send Ctrl-C + return false; } - return false; + return true; // Return true for normal processing of tap keycode case LT(0,KC_V): - if (record->tap.count && record->event.pressed) { - return true; // Return true for normal processing of tap keycode - } else if (record->event.pressed) { + if (!record->tap.count && record->event.pressed) { tap_code16(C(KC_V)); // Intercept hold function to send Ctrl-V + return false; } - return false; + return true; // Return true for normal processing of tap keycode } return true; } From 8323177472e65ccb47709efd1287a301267bbfd4 Mon Sep 17 00:00:00 2001 From: Markus Fritsche <37203914+marfrit@users.noreply.github.com> Date: Sat, 13 Nov 2021 00:00:36 +0100 Subject: [PATCH 478/595] add wait to unicode for win (#15061) Co-authored-by: Markus Fritsche --- quantum/process_keycode/process_unicode_common.c | 1 + 1 file changed, 1 insertion(+) diff --git a/quantum/process_keycode/process_unicode_common.c b/quantum/process_keycode/process_unicode_common.c index 46fcaaa86b..889c768a85 100644 --- a/quantum/process_keycode/process_unicode_common.c +++ b/quantum/process_keycode/process_unicode_common.c @@ -100,6 +100,7 @@ __attribute__((weak)) void unicode_input_start(void) { break; case UC_WIN: register_code(KC_LALT); + wait_ms(UNICODE_TYPE_DELAY); tap_code(KC_PPLS); break; case UC_WINC: From f3efc988770f3c097d854837cb01b0db3ca4faeb Mon Sep 17 00:00:00 2001 From: Albert Y <76888457+filterpaper@users.noreply.github.com> Date: Sun, 14 Nov 2021 01:10:44 +0800 Subject: [PATCH 479/595] [Keyboard] Add space between Cradio info.json layout (#15127) Co-authored-by: filterpaper --- keyboards/cradio/info.json | 44 +++++++++++++++++++------------------- 1 file changed, 22 insertions(+), 22 deletions(-) diff --git a/keyboards/cradio/info.json b/keyboards/cradio/info.json index 7a46c69113..c553810656 100644 --- a/keyboards/cradio/info.json +++ b/keyboards/cradio/info.json @@ -5,47 +5,47 @@ "layouts": { "LAYOUT": { "layout": [ - {"x": 0, "y": 0.95}, + {"x": 0, "y": 1.27}, {"x": 1, "y": 0.31}, {"x": 2, "y": 0}, {"x": 3, "y": 0.28}, {"x": 4, "y": 0.42}, - {"x": 7, "y": 0.42}, - {"x": 8, "y": 0.28}, - {"x": 9, "y": 0}, - {"x": 10, "y": 0.31}, - {"x": 11, "y": 0.95}, + {"x": 8, "y": 0.42}, + {"x": 9, "y": 0.28}, + {"x": 10, "y": 0}, + {"x": 11, "y": 0.31}, + {"x": 12, "y": 1.27}, - {"x": 0, "y": 1.95}, + {"x": 0, "y": 2.27}, {"x": 1, "y": 1.31}, {"x": 2, "y": 1}, {"x": 3, "y": 1.28}, {"x": 4, "y": 1.42}, - {"x": 7, "y": 1.42}, - {"x": 8, "y": 1.28}, - {"x": 9, "y": 1}, - {"x": 10, "y": 1.31}, - {"x": 11, "y": 1.95}, + {"x": 8, "y": 1.42}, + {"x": 9, "y": 1.28}, + {"x": 10, "y": 1}, + {"x": 11, "y": 1.31}, + {"x": 12, "y": 2.27}, - {"x": 0, "y": 2.95}, + {"x": 0, "y": 3.27}, {"x": 1, "y": 2.31}, {"x": 2, "y": 2}, {"x": 3, "y": 2.28}, {"x": 4, "y": 2.42}, - {"x": 7, "y": 2.42}, - {"x": 8, "y": 2.28}, - {"x": 9, "y": 2}, - {"x": 10, "y": 2.31}, - {"x": 11, "y": 2.95}, + {"x": 8, "y": 2.42}, + {"x": 9, "y": 2.28}, + {"x": 10, "y": 2}, + {"x": 11, "y": 2.31}, + {"x": 12, "y": 3.27}, - {"x": 4, "y": 3.6}, - {"x": 5, "y": 3.4}, + {"x": 4, "y": 3.9}, + {"x": 5, "y": 3.7}, - {"x": 6, "y": 3.4}, - {"x": 7, "y": 3.6} + {"x": 7, "y": 3.7}, + {"x": 8, "y": 3.9} ] } } From 0ee9c41cc631d498591408fe2fcc4c1ac57d854d Mon Sep 17 00:00:00 2001 From: peepeetee <43021794+peepeetee@users.noreply.github.com> Date: Sun, 14 Nov 2021 01:18:02 +0800 Subject: [PATCH 480/595] Fix hebrew emoji in langs.md (#15140) --- docs/_langs.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/_langs.md b/docs/_langs.md index f7b375fb94..3fecd72da6 100644 --- a/docs/_langs.md +++ b/docs/_langs.md @@ -3,7 +3,7 @@ - [:cn: 中文](/zh-cn/) - [:es: Español](/es/) - [:fr: Français](/fr-fr/) - - [:he: עברית](/he-il/) + - [:israel: עברית](/he-il/) - [:brazil: Português](/pt-br/) - [:ru: Русский](/ru-ru/) - [:jp: 日本語](/ja/) From 04b51e381e2ff3f4c7aba662e1c817ce5daa931d Mon Sep 17 00:00:00 2001 From: Ryan Date: Sun, 14 Nov 2021 05:23:14 +1100 Subject: [PATCH 481/595] Update UART driver API (#14839) * Add uart_puts() and uart_gets() * Add some docs * Rework API * Formatting * Update docs/uart_driver.md Co-authored-by: Sergey Vlasov * Simplify a uart_write() loop * Update platforms/avr/drivers/uart.c Co-authored-by: Joel Challis Co-authored-by: Sergey Vlasov Co-authored-by: Joel Challis --- docs/uart_driver.md | 38 +++++++++++++++++++++---- keyboards/mschwingen/modelm/modelm.c | 2 +- keyboards/nullbitsco/common/remote_kb.c | 6 ++-- paths.mk | 1 - platforms/avr/drivers/uart.c | 26 ++++++++++++----- platforms/avr/drivers/uart.h | 8 ++++-- platforms/chibios/drivers/uart.c | 8 ++++-- platforms/chibios/drivers/uart.h | 8 ++++-- 8 files changed, 72 insertions(+), 25 deletions(-) diff --git a/docs/uart_driver.md b/docs/uart_driver.md index 4d1716975f..340b648189 100644 --- a/docs/uart_driver.md +++ b/docs/uart_driver.md @@ -60,30 +60,56 @@ Initialize the UART driver. This function must be called only once, before any o --- -### `void uart_putchar(uint8_t c)` +### `void uart_write(uint8_t data)` Transmit a single byte. #### Arguments - - `uint8_t c` - The byte (character) to send, from 0 to 255. + - `uint8_t data` + The byte to write. --- -### `uint8_t uart_getchar(void)` +### `uint8_t uart_read(void)` Receive a single byte. #### Return Value -The byte read from the receive buffer. +The byte read from the receive buffer. This function will block if the buffer is empty (ie. no data to read). + +--- + +### `void uart_transmit(const uint8_t *data, uint16_t length)` + +Transmit multiple bytes. + +#### Arguments + + - `const uint8_t *data` + A pointer to the data to write from. + - `uint16_t length` + The number of bytes to write. Take care not to overrun the length of `data`. + +--- + +### `void uart_receive(char *data, uint16_t length)` + +Receive multiple bytes. + +#### Arguments + + - `uint8_t *data` + A pointer to the buffer to read into. + - `uint16_t length` + The number of bytes to read. Take care not to overrun the length of `data`. --- ### `bool uart_available(void)` -Return whether the receive buffer contains data. Call this function to determine if `uart_getchar()` will return meaningful data. +Return whether the receive buffer contains data. Call this function to determine if `uart_read()` will return data immediately. #### Return Value diff --git a/keyboards/mschwingen/modelm/modelm.c b/keyboards/mschwingen/modelm/modelm.c index c1180612ad..7dcd4ac024 100644 --- a/keyboards/mschwingen/modelm/modelm.c +++ b/keyboards/mschwingen/modelm/modelm.c @@ -27,7 +27,7 @@ # undef sendchar static int8_t capture_sendchar(uint8_t c) { // sendchar(c); - uart_putchar(c); + uart_write(c); return 0; } #endif diff --git a/keyboards/nullbitsco/common/remote_kb.c b/keyboards/nullbitsco/common/remote_kb.c index 89cbf9a92a..4dcc9f4616 100644 --- a/keyboards/nullbitsco/common/remote_kb.c +++ b/keyboards/nullbitsco/common/remote_kb.c @@ -63,9 +63,7 @@ static void send_msg(uint16_t keycode, bool pressed) { msg[IDX_PRESSED] = pressed; msg[IDX_CHECKSUM] = chksum8(msg, UART_MSG_LEN-1); - for (int i=0; i= RX_BUFFER_SIZE) i = 0; - c = rx_buffer[i]; + data = rx_buffer[i]; rx_buffer_tail = i; - return c; + return data; +} + +void uart_transmit(const uint8_t *data, uint16_t length) { + for (uint16_t i = 0; i < length; i++) { + uart_write(data[i]); + } +} + +void uart_receive(uint8_t *data, uint16_t length) { + for (uint16_t i = 0; i < length; i++) { + data[i] = uart_read(); + } } // Return whether the number of bytes waiting in the receive buffer is nonzero. -// Call this before uart_getchar() to check if it will need +// Call this before uart_read() to check if it will need // to wait for a byte to arrive. bool uart_available(void) { uint8_t head, tail; diff --git a/platforms/avr/drivers/uart.h b/platforms/avr/drivers/uart.h index 602eb3d8b0..9cb7652b08 100644 --- a/platforms/avr/drivers/uart.h +++ b/platforms/avr/drivers/uart.h @@ -28,8 +28,12 @@ void uart_init(uint32_t baud); -void uart_putchar(uint8_t c); +void uart_write(uint8_t data); -uint8_t uart_getchar(void); +uint8_t uart_read(void); + +void uart_transmit(const char *data, uint16_t length); + +void uart_receive(char *data, uint16_t length); bool uart_available(void); diff --git a/platforms/chibios/drivers/uart.c b/platforms/chibios/drivers/uart.c index 0e8e0515af..297c1892c3 100644 --- a/platforms/chibios/drivers/uart.c +++ b/platforms/chibios/drivers/uart.c @@ -39,12 +39,16 @@ void uart_init(uint32_t baud) { } } -void uart_putchar(uint8_t c) { sdPut(&SERIAL_DRIVER, c); } +void uart_write(uint8_t data) { sdPut(&SERIAL_DRIVER, c); } -uint8_t uart_getchar(void) { +uint8_t uart_read(void) { msg_t res = sdGet(&SERIAL_DRIVER); return (uint8_t)res; } +void uart_transmit(const uint8_t *data, uint16_t length) { sdWrite(&SERIAL_DRIVER, data, length); } + +void uart_receive(uint8_t *data, uint16_t length) { sdRead(&SERIAL_DRIVER, data, length); } + bool uart_available(void) { return !sdGetWouldBlock(&SERIAL_DRIVER); } diff --git a/platforms/chibios/drivers/uart.h b/platforms/chibios/drivers/uart.h index b4e20e9fd3..5bc4875901 100644 --- a/platforms/chibios/drivers/uart.h +++ b/platforms/chibios/drivers/uart.h @@ -70,8 +70,12 @@ void uart_init(uint32_t baud); -void uart_putchar(uint8_t c); +void uart_write(uint8_t data); -uint8_t uart_getchar(void); +uint8_t uart_read(void); + +void uart_transmit(const uint8_t *data, uint16_t length); + +void uart_receive(uint8_t *data, uint16_t length); bool uart_available(void); From 562c828f755a7ec768174dbc2e9d0a7e36e23db3 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Sat, 13 Nov 2021 20:22:10 +0000 Subject: [PATCH 482/595] kb_elmo/m0110a_usb: Fix Configurator Key Sequence (#15143) * correct info.json key sequence * friendly-format info.json Adds label keys and line breaks between the keyboard rows. --- keyboards/kb_elmo/m0110a_usb/info.json | 160 +++++++++++++------------ 1 file changed, 82 insertions(+), 78 deletions(-) diff --git a/keyboards/kb_elmo/m0110a_usb/info.json b/keyboards/kb_elmo/m0110a_usb/info.json index 18b75ad7ed..1970c4960c 100644 --- a/keyboards/kb_elmo/m0110a_usb/info.json +++ b/keyboards/kb_elmo/m0110a_usb/info.json @@ -5,84 +5,88 @@ "layouts": { "LAYOUT": { "layout": [ - {"x":0, "y":0}, - {"x":1, "y":0}, - {"x":2, "y":0}, - {"x":3, "y":0}, - {"x":4, "y":0}, - {"x":5, "y":0}, - {"x":6, "y":0}, - {"x":7, "y":0}, - {"x":8, "y":0}, - {"x":9, "y":0}, - {"x":10, "y":0}, - {"x":11, "y":0}, - {"x":12, "y":0}, - {"x":13, "y":0, "w":1.5}, - {"x":15.25, "y":0}, - {"x":16.25, "y":0}, - {"x":17.25, "y":0}, - {"x":18.25, "y":0}, - {"x":0, "y":1, "w":1.5}, - {"x":1.5, "y":1}, - {"x":2.5, "y":1}, - {"x":3.5, "y":1}, - {"x":4.5, "y":1}, - {"x":5.5, "y":1}, - {"x":6.5, "y":1}, - {"x":7.5, "y":1}, - {"x":8.5, "y":1}, - {"x":9.5, "y":1}, - {"x":10.5, "y":1}, - {"x":11.5, "y":1}, - {"x":12.5, "y":1}, - {"x":15.25, "y":1}, - {"x":16.25, "y":1}, - {"x":17.25, "y":1}, - {"x":18.25, "y":1}, - {"x":0, "y":2, "w":1.75}, - {"x":1.75, "y":2}, - {"x":2.75, "y":2}, - {"x":3.75, "y":2}, - {"x":4.75, "y":2}, - {"x":5.75, "y":2}, - {"x":6.75, "y":2}, - {"x":7.75, "y":2}, - {"x":8.75, "y":2}, - {"x":9.75, "y":2}, - {"x":10.75, "y":2}, - {"x":11.75, "y":2}, - {"x":13.5, "y":1, "h":2}, - {"x":15.25, "y":2}, - {"x":16.25, "y":2}, - {"x":17.25, "y":2}, - {"x":18.25, "y":2}, - {"x":0, "y":3, "w":2.25}, - {"x":2.25, "y":3}, - {"x":3.25, "y":3}, - {"x":4.25, "y":3}, - {"x":5.25, "y":3}, - {"x":6.25, "y":3}, - {"x":7.25, "y":3}, - {"x":8.25, "y":3}, - {"x":9.25, "y":3}, - {"x":10.25, "y":3}, - {"x":11.25, "y":3}, - {"x":12.25, "y":3, "w":1.25}, - {"x":13.5, "y":3}, - {"x":15.25, "y":3}, - {"x":16.25, "y":3}, - {"x":17.25, "y":3}, - {"x":18.25, "y":3, "h":2}, - {"x":0, "y":4, "w":1.5}, - {"x":1.5, "y":4, "w":2}, - {"x":3.5, "y":4, "w":7}, - {"x":10.5, "y":4}, - {"x":11.5, "y":4}, - {"x":12.5, "y":4}, - {"x":13.5, "y":4}, - {"x":15.25, "y":4, "w":2}, - {"x":17.25, "y":4} + {"label":"Esc", "x":0, "y":0}, + {"label":"1!", "x":1, "y":0}, + {"label":"2@", "x":2, "y":0}, + {"label":"3#", "x":3, "y":0}, + {"label":"4$", "x":4, "y":0}, + {"label":"5%", "x":5, "y":0}, + {"label":"6^", "x":6, "y":0}, + {"label":"7&", "x":7, "y":0}, + {"label":"8*", "x":8, "y":0}, + {"label":"9(", "x":9, "y":0}, + {"label":"0)", "x":10, "y":0}, + {"label":"-_", "x":11, "y":0}, + {"label":"=+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0, "w":1.5}, + {"label":"Delete", "x":15.25, "y":0}, + {"label":"=+", "x":16.25, "y":0}, + {"label":"/", "x":17.25, "y":0}, + {"label":"*", "x":18.25, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[{", "x":11.5, "y":1}, + {"label":"]}", "x":12.5, "y":1}, + {"label":"7", "x":15.25, "y":1}, + {"label":"8", "x":16.25, "y":1}, + {"label":"9", "x":17.25, "y":1}, + {"label":"-", "x":18.25, "y":1}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";:", "x":10.75, "y":2}, + {"label":"'\"", "x":11.75, "y":2}, + {"label":"Enter", "x":13.5, "y":1, "h":2}, + {"label":"4", "x":15.25, "y":2}, + {"label":"5", "x":16.25, "y":2}, + {"label":"6", "x":17.25, "y":2}, + {"label":"+", "x":18.25, "y":2}, + + {"label":"Shift", "x":0, "y":3, "w":2.25}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",<", "x":9.25, "y":3}, + {"label":".>", "x":10.25, "y":3}, + {"label":"/?", "x":11.25, "y":3}, + {"label":"MO(1)", "x":12.25, "y":3, "w":1.25}, + {"label":"Up", "x":13.5, "y":3}, + {"label":"1", "x":15.25, "y":3}, + {"label":"2", "x":16.25, "y":3}, + {"label":"3", "x":17.25, "y":3}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.5}, + {"label":"GUI", "x":1.5, "y":4, "w":2}, + {"label":"Space", "x":3.5, "y":4, "w":7}, + {"label":"\\|", "x":10.5, "y":4}, + {"label":"Left", "x":11.5, "y":4}, + {"label":"Right", "x":12.5, "y":4}, + {"label":"Down", "x":13.5, "y":4}, + {"label":"0", "x":15.25, "y":4, "w":2}, + {"label":".", "x":17.25, "y":4}, + {"label":"Enter", "x":18.25, "y":3, "h":2} ] } } From b785305080fe6454d1a5c8a818c538d9e693090f Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Sat, 13 Nov 2021 20:22:35 +0000 Subject: [PATCH 483/595] kb_elmo/elmopad: fix macro reference in info.json (#15142) --- keyboards/kb_elmo/elmopad/info.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/keyboards/kb_elmo/elmopad/info.json b/keyboards/kb_elmo/elmopad/info.json index 51709229b5..6193342c6b 100644 --- a/keyboards/kb_elmo/elmopad/info.json +++ b/keyboards/kb_elmo/elmopad/info.json @@ -3,7 +3,7 @@ "url": "https://github.com/kb-elmo/numpad", "maintainer": "kb-elmo", "layouts": { - "LAYOUT": { + "LAYOUT_numpad_6x4": { "layout": [ {"x":0, "y":0}, {"x":1, "y":0}, From ec0bb791f89c1ba53a9dcc3ca02ec6ad9823d2a1 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Sun, 14 Nov 2021 23:06:22 +0000 Subject: [PATCH 484/595] Partially reinstate CI formatting process (#15155) * Partially reinstate CI formatting process * Fix exit code on clean run * Fix exit code on clean run --- .github/workflows/format.yaml | 21 ++++++---- lib/python/qmk/cli/format/text.py | 64 +++++++++++++++++++++++-------- 2 files changed, 61 insertions(+), 24 deletions(-) diff --git a/.github/workflows/format.yaml b/.github/workflows/format.yaml index 0bb8701068..9e165e0e8d 100644 --- a/.github/workflows/format.yaml +++ b/.github/workflows/format.yaml @@ -19,7 +19,9 @@ jobs: container: qmkfm/qmk_cli steps: - - uses: rlespinasse/github-slug-action@v3.x + - name: Install dependencies + run: | + apt-get update && apt-get install -y dos2unix - uses: actions/checkout@v2 with: @@ -31,12 +33,17 @@ jobs: output: ' ' fileOutput: ' ' - - name: Run qmk format-c and qmk format-python + - name: Run qmk formatters shell: 'bash {0}' run: | - qmk format-c --core-only -n $(< ~/files.txt) - format_c_exit=$? - qmk format-python -n - format_python_exit=$? + qmk format-c --core-only $(< ~/files.txt) + qmk format-python + qmk format-text $(< ~/files.txt) + git diff - exit $((format_c_exit + format_python_exit)) + - name: Fail when formatting required + run: | + for file in $(git diff --name-only); do + echo "::error file=${file}::::File Requires Formatting" + done + test -z "$(git diff --name-only)" diff --git a/lib/python/qmk/cli/format/text.py b/lib/python/qmk/cli/format/text.py index e7e07b7297..6dd4511896 100644 --- a/lib/python/qmk/cli/format/text.py +++ b/lib/python/qmk/cli/format/text.py @@ -1,27 +1,57 @@ """Ensure text files have the proper line endings. """ -from subprocess import CalledProcessError +from itertools import islice +from subprocess import DEVNULL from milc import cli +from qmk.path import normpath + +def _get_chunks(it, size): + """Break down a collection into smaller parts + """ + it = iter(it) + return iter(lambda: tuple(islice(it, size)), ()) + + +def dos2unix_run(files): + """Spawn multiple dos2unix subprocess avoiding too long commands on formatting everything + """ + for chunk in _get_chunks(files, 10): + dos2unix = cli.run(['dos2unix', *chunk]) + + if dos2unix.returncode: + return False + + +@cli.argument('-b', '--base-branch', default='origin/master', help='Branch to compare to diffs to.') +@cli.argument('-a', '--all-files', arg_only=True, action='store_true', help='Format all files.') +@cli.argument('files', nargs='*', arg_only=True, type=normpath, help='Filename(s) to format.') @cli.subcommand("Ensure text files have the proper line endings.", hidden=True) def format_text(cli): """Ensure text files have the proper line endings. """ - try: - file_list_cmd = cli.run(['git', 'ls-files', '-z'], check=True) - except CalledProcessError as e: - cli.log.error('Could not get file list: %s', e) - exit(1) - except Exception as e: - cli.log.error('Unhandled exception: %s: %s', e.__class__.__name__, e) - cli.log.exception(e) - exit(1) - - dos2unix = cli.run(['xargs', '-0', 'dos2unix'], stdin=None, input=file_list_cmd.stdout) - - if dos2unix.returncode != 0: - print(dos2unix.stderr) - - return dos2unix.returncode + # Find the list of files to format + if cli.args.files: + files = list(cli.args.files) + + if cli.args.all_files: + cli.log.warning('Filenames passed with -a, only formatting: %s', ','.join(map(str, files))) + + elif cli.args.all_files: + git_ls_cmd = ['git', 'ls-files'] + git_ls = cli.run(git_ls_cmd, stdin=DEVNULL) + files = list(filter(None, git_ls.stdout.split('\n'))) + + else: + git_diff_cmd = ['git', 'diff', '--name-only', cli.args.base_branch] + git_diff = cli.run(git_diff_cmd, stdin=DEVNULL) + files = list(filter(None, git_diff.stdout.split('\n'))) + + # Sanity check + if not files: + cli.log.error('No changed files detected. Use "qmk format-text -a" to format all files') + return False + + return dos2unix_run(files) From 56e3f06a26851976e559aacf7a096c61403304be Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Sun, 14 Nov 2021 22:03:24 -0800 Subject: [PATCH 485/595] Rework and expand Pointing Device support (#14343) Co-authored-by: Dasky <32983009+daskygit@users.noreply.github.com> --- common_features.mk | 39 ++- docs/feature_pointing_device.md | 202 +++++++++++- drivers/sensors/adns5050.c | 157 +++++---- drivers/sensors/adns5050.h | 75 ++--- drivers/sensors/adns9800.c | 175 +++++----- drivers/sensors/adns9800.h | 42 ++- drivers/sensors/adns9800_srom_A6.h | 2 +- drivers/sensors/analog_joystick.c | 94 ++++++ drivers/sensors/analog_joystick.h | 51 +++ drivers/sensors/cirque_pinnacle.c | 232 ++++++++++++++ drivers/sensors/cirque_pinnacle.h | 74 +++++ drivers/sensors/cirque_pinnacle_i2c.c | 43 +++ drivers/sensors/cirque_pinnacle_spi.c | 52 +++ drivers/sensors/pimoroni_trackball.c | 187 +++-------- drivers/sensors/pimoroni_trackball.h | 48 ++- drivers/sensors/pmw3360.c | 140 ++++---- drivers/sensors/pmw3360.h | 38 ++- drivers/sensors/pmw3360_firmware.h | 5 + drivers/sensors/pmw3389_firmware.h | 303 ++++++++++++++++++ .../nano/keymaps/drashna/config.h} | 21 +- .../nano/keymaps/drashna/keymap.c | 95 ------ .../nano/keymaps/drashna/rules.mk | 11 +- .../tractyl_manuform/5x6_right/config.h | 1 + .../5x6_right/keymaps/drashna/keymap.c | 11 +- .../tractyl_manuform/5x6_right/rules.mk | 4 +- .../handwired/tractyl_manuform/tm_sync.c | 3 +- .../tractyl_manuform/tractyl_manuform.c | 81 +---- keyboards/oddball/config.h | 3 + keyboards/oddball/keymaps/default/config.h | 1 - keyboards/oddball/keymaps/default/rules.mk | 1 + keyboards/oddball/keymaps/pmw3360/config.h | 1 - keyboards/oddball/keymaps/pmw3360/rules.mk | 1 + keyboards/oddball/oddball.c | 54 +--- .../oddball/optical_sensor/optical_sensor.h | 53 --- keyboards/oddball/pmw/pmw.c | 226 ------------- keyboards/oddball/pmw/pmw3360_srom_0x04.h | 280 ---------------- keyboards/oddball/rules.mk | 4 - keyboards/ploopyco/mouse/mouse.c | 117 ++----- keyboards/ploopyco/mouse/mouse.h | 6 - keyboards/ploopyco/mouse/rules.mk | 5 +- keyboards/ploopyco/trackball/rules.mk | 5 +- keyboards/ploopyco/trackball/trackball.c | 105 ++---- keyboards/ploopyco/trackball/trackball.h | 6 - keyboards/ploopyco/trackball_mini/config.h | 6 + .../keymaps/drag_scroll/keymap.c | 2 +- keyboards/ploopyco/trackball_mini/rules.mk | 6 +- .../ploopyco/trackball_mini/trackball_mini.c | 108 ++----- .../ploopyco/trackball_mini/trackball_mini.h | 5 - keyboards/ploopyco/trackball_nano/config.h | 6 + .../trackball_nano/keymaps/maddie/keymap.c | 22 +- keyboards/ploopyco/trackball_nano/rules.mk | 7 +- .../ploopyco/trackball_nano/trackball_nano.c | 116 +------ .../ploopyco/trackball_nano/trackball_nano.h | 13 - keyboards/tkw/grandiceps/rev2/rules.mk | 3 +- layouts/community/ergodox/drashna/keymap.c | 32 +- quantum/pointing_device.c | 123 +++++-- quantum/pointing_device.h | 59 ++++ quantum/pointing_device_drivers.c | 262 +++++++++++++++ quantum/quantum.c | 4 + quantum/quantum.h | 4 + 60 files changed, 2117 insertions(+), 1715 deletions(-) create mode 100644 drivers/sensors/analog_joystick.c create mode 100644 drivers/sensors/analog_joystick.h create mode 100644 drivers/sensors/cirque_pinnacle.c create mode 100644 drivers/sensors/cirque_pinnacle.h create mode 100644 drivers/sensors/cirque_pinnacle_i2c.c create mode 100644 drivers/sensors/cirque_pinnacle_spi.c create mode 100644 drivers/sensors/pmw3389_firmware.h rename keyboards/{oddball/pmw/pmw.h => 40percentclub/nano/keymaps/drashna/config.h} (62%) delete mode 100644 keyboards/oddball/keymaps/default/config.h create mode 100644 keyboards/oddball/keymaps/default/rules.mk delete mode 100644 keyboards/oddball/keymaps/pmw3360/config.h create mode 100644 keyboards/oddball/keymaps/pmw3360/rules.mk delete mode 100644 keyboards/oddball/optical_sensor/optical_sensor.h delete mode 100644 keyboards/oddball/pmw/pmw.c delete mode 100644 keyboards/oddball/pmw/pmw3360_srom_0x04.h create mode 100644 quantum/pointing_device_drivers.c diff --git a/common_features.mk b/common_features.mk index 7abdce302c..896fbb0129 100644 --- a/common_features.mk +++ b/common_features.mk @@ -107,10 +107,43 @@ ifeq ($(strip $(MOUSEKEY_ENABLE)), yes) SRC += $(QUANTUM_DIR)/mousekey.c endif +VALID_POINTING_DEVICE_DRIVER_TYPES := adns5050 adns9800 analog_joystick cirque_pinnacle_i2c cirque_pinnacle_spi pmw3360 pimoroni_trackball custom +POINTING_DEVICE_DRIVER ?= custom ifeq ($(strip $(POINTING_DEVICE_ENABLE)), yes) - OPT_DEFS += -DPOINTING_DEVICE_ENABLE - MOUSE_ENABLE := yes - SRC += $(QUANTUM_DIR)/pointing_device.c + ifeq ($(filter $(POINTING_DEVICE_DRIVER),$(VALID_POINTING_DEVICE_DRIVER_TYPES)),) + $(error POINTING_DEVICE_DRIVER="$(POINTING_DEVICE_DRIVER)" is not a valid pointing device type) + else + OPT_DEFS += -DPOINTING_DEVICE_ENABLE + MOUSE_ENABLE := yes + SRC += $(QUANTUM_DIR)/pointing_device.c + SRC += $(QUANTUM_DIR)/pointing_device_drivers.c + ifneq ($(strip $(POINTING_DEVICE_DRIVER)), custom) + SRC += drivers/sensors/$(strip $(POINTING_DEVICE_DRIVER)).c + OPT_DEFS += -DPOINTING_DEVICE_DRIVER_$(strip $(shell echo $(POINTING_DEVICE_DRIVER) | tr '[:lower:]' '[:upper:]')) + endif + OPT_DEFS += -DPOINTING_DEVICE_DRIVER_$(strip $(POINTING_DEVICE_DRIVER)) + ifeq ($(strip $(POINTING_DEVICE_DRIVER)), adns9800) + OPT_DEFS += -DSTM32_SPI -DHAL_USE_SPI=TRUE + QUANTUM_LIB_SRC += spi_master.c + else ifeq ($(strip $(POINTING_DEVICE_DRIVER)), analog_joystick) + OPT_DEFS += -DSTM32_ADC -DHAL_USE_ADC=TRUE + LIB_SRC += analog.c + else ifeq ($(strip $(POINTING_DEVICE_DRIVER)), cirque_pinnacle_i2c) + OPT_DEFS += -DSTM32_I2C -DHAL_USE_I2C=TRUE + SRC += drivers/sensors/cirque_pinnacle.c + QUANTUM_LIB_SRC += i2c_master.c + else ifeq ($(strip $(POINTING_DEVICE_DRIVER)), cirque_pinnacle_spi) + OPT_DEFS += -DSTM32_SPI -DHAL_USE_SPI=TRUE + SRC += drivers/sensors/cirque_pinnacle.c + QUANTUM_LIB_SRC += spi_master.c + else ifeq ($(strip $(POINTING_DEVICE_DRIVER)), pimoroni_trackball) + OPT_DEFS += -DSTM32_SPI -DHAL_USE_I2C=TRUE + QUANTUM_LIB_SRC += i2c_master.c + else ifeq ($(strip $(POINTING_DEVICE_DRIVER)), pmw3360) + OPT_DEFS += -DSTM32_SPI -DHAL_USE_SPI=TRUE + QUANTUM_LIB_SRC += spi_master.c + endif + endif endif VALID_EEPROM_DRIVER_TYPES := vendor custom transient i2c spi diff --git a/docs/feature_pointing_device.md b/docs/feature_pointing_device.md index badeadc12b..031ee52c1c 100644 --- a/docs/feature_pointing_device.md +++ b/docs/feature_pointing_device.md @@ -1,6 +1,6 @@ # Pointing Device :id=pointing-device -Pointing Device is a generic name for a feature intended to be generic: moving the system pointer around. There are certainly other options for it - like mousekeys - but this aims to be easily modifiable and lightweight. You can implement custom keys to control functionality, or you can gather information from other peripherals and insert it directly here - let QMK handle the processing for you. +Pointing Device is a generic name for a feature intended to be generic: moving the system pointer around. There are certainly other options for it - like mousekeys - but this aims to be easily modifiable and hardware driven. You can implement custom keys to control functionality, or you can gather information from other peripherals and insert it directly here - let QMK handle the processing for you. To enable Pointing Device, uncomment the following line in your rules.mk: @@ -8,12 +8,198 @@ To enable Pointing Device, uncomment the following line in your rules.mk: POINTING_DEVICE_ENABLE = yes ``` -To manipulate the mouse report, you can use the following functions: +## Sensor Drivers + +There are a number of sensors that are supported by default. Note that only one sensor can be enabled by `POINTING_DEVICE_DRIVER` at a time. If you need to enable more than one sensor, then you need to implement it manually. + +### ADNS 5050 Sensor + +To use the ADNS 5050 sensor, add this to your `rules.mk` + +```make +POINTING_DEVICE_DRIVER = adns5050 +``` + +The ADNS 5050 sensor uses a serial type protocol for communication, and requires an additional light source. + +| Setting | Description | +|--------------------|---------------------------------------------------------------------| +|`ADNS5050_SCLK_PIN` | (Required) The pin connected to the clock pin of the sensor. | +|`ADNS5050_SDIO_PIN` | (Required) The pin connected to the data pin of the sensor. | +|`ADNS5050_CS_PIN` | (Required) The pin connected to the cable select pin of the sensor. | + +The CPI range is 125-1375, in increments of 125. Defaults to 500 CPI. + +### ADSN 9800 Sensor + +To use the ADNS 9800 sensor, add this to your `rules.mk` + +```make +POINTING_DEVICE_DRIVER = adns9800 +``` + +The ADNS 9800 is an SPI driven optical sensor, that uses laser output for surface tracking. + +| Setting | Description | Default | +|------------------------|------------------------------------------------------------------------|---------------| +|`ADNS9800_CLOCK_SPEED` | (Optional) Sets the clock speed that the sensor runs at. | `2000000` | +|`ADNS9800_SPI_LSBFIRST` | (Optional) Sets the Least/Most Significant Byte First setting for SPI. | `false` | +|`ADNS9800_SPI_MODE` | (Optional) Sets the SPI Mode for the sensor. | `3` | +|`ADNS9800_SPI_DIVISOR` | (Optional) Sets the SPI Divisor used for SPI communication. | _varies_ | +|`ADNS9800_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | _not defined_ | + + +The CPI range is 800-8200, in increments of 200. Defaults to 1800 CPI. + +### Analog Joystick + +To use an analog joystick to control the pointer, add this to your `rules.mk` + +```make +POINTING_DEVICE_DRIVER = analog_joystick +``` + +The Analog Joystick is an analog (ADC) driven sensor. There are a variety of joysticks that you can use for this. + +| Setting | Description | Default | +|----------------------------------|----------------------------------------------------------------------------|---------------| +|`ANALOG_JOYSTICK_X_AXIS_PIN` | (Required) The pin used for the vertical/X axis. | _not defined_ | +|`ANALOG_JOYSTICK_Y_AXIS_PIN` | (Required) The pin used for the horizontal/Y axis. | _not defined_ | +|`ANALOG_JOYSTICK_AXIS_MIN` | (Optional) Sets the lower range to be considered movement. | `0` | +|`ANALOG_JOYSTICK_AXIS_MAX` | (Optional) Sets the upper range to be considered movement. | `1023` | +|`ANALOG_JOYSTICK_SPEED_REGULATOR` | (Optional) The divisor used to slow down movement. (lower makes it faster) | `20` | +|`ANALOG_JOYSTICK_READ_INTERVAL` | (Optional) The interval in milliseconds between reads. | `10` | +|`ANALOG_JOYSTICK_SPEED_MAX` | (Optional) The maxiumum value used for motion. | `2` | +|`ANALOG_JOYSTICK_CLICK_PIN` | (Optional) The pin wired up to the press switch of the analog stick. | _not defined_ | + + +### Cirque Trackpad + +To use the Cirque Trackpad sensor, add this to your `rules.mk`: + +```make +POINTING_DEVICE_DRIVER = cirque_pinnacle_i2c +``` + +or + +```make +POINTING_DEVICE_DRIVER = cirque_pinnacle_spi +``` -* `pointing_device_get_report()` - Returns the current report_mouse_t that represents the information sent to the host computer -* `pointing_device_set_report(report_mouse_t newMouseReport)` - Overrides and saves the report_mouse_t to be sent to the host computer -Keep in mind that a report_mouse_t (here "mouseReport") has the following properties: +This supports the Cirque Pinnacle 1CA027 Touch Controller, which is used in the TM040040, TM035035 and the TM023023 trackpads. These are I2C or SPI compatible, and both configurations are supported. + +| Setting | Description | Default | +|---------------------------------|---------------------------------------------------------------------------------|-----------------------| +|`CIRQUE_PINNACLE_X_LOWER` | (Optional) The minimum reachable X value on the sensor. | `127` | +|`CIRQUE_PINNACLE_X_UPPER` | (Optional) The maximum reachable X value on the sensor. | `1919` | +|`CIRQUE_PINNACLE_Y_LOWER` | (Optional) The minimum reachable Y value on the sensor. | `63` | +|`CIRQUE_PINNACLE_Y_UPPER` | (Optional) The maximum reachable Y value on the sensor. | `1471` | +|`CIRQUE_PINNACLE_TAPPING_TERM` | (Optional) Length of time that a touch can be to be considered a tap. | `TAPPING_TERM`/`200` | +|`CIRQUE_PINNACLE_TOUCH_DEBOUNCE` | (Optional) Length of time that a touch can be to be considered a tap. | `TAPPING_TERM`/`200` | + +| I2C Setting | Description | Default | +|--------------------------|---------------------------------------------------------------------------------|---------| +|`CIRQUE_PINNACLE_ADDR` | (Required) Sets the I2C Address for the Cirque Trackpad | `0x2A` | +|`CIRQUE_PINNACLE_TIMEOUT` | (Optional) The timeout for i2c communication with the trackpad in milliseconds. | `20` | + +| SPI Setting | Description | Default | +|-------------------------------|------------------------------------------------------------------------|---------------| +|`CIRQUE_PINNACLE_CLOCK_SPEED` | (Optional) Sets the clock speed that the sensor runs at. | `1000000` | +|`CIRQUE_PINNACLE_SPI_LSBFIRST` | (Optional) Sets the Least/Most Significant Byte First setting for SPI. | `false` | +|`CIRQUE_PINNACLE_SPI_MODE` | (Optional) Sets the SPI Mode for the sensor. | `1` | +|`CIRQUE_PINNACLE_SPI_DIVISOR` | (Optional) Sets the SPI Divisor used for SPI communication. | _varies_ | +|`CIRQUE_PINNACLE_SPI_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | _not defined_ | + +Default Scaling/CPI is 1024. + +### Pimoroni Trackball + +To use the Pimoroni Trackball module, add this to your `rules.mk`: + +```make +POINTING_DEVICE_DRIVER = pimoroni_trackball +``` + +The Pimoroni Trackball module is a I2C based breakout board with an RGB enable trackball. + +| Setting | Description | Default | +|-------------------------------------|------------------------------------------------------------------------------------|---------| +|`PIMORONI_TRACKBALL_ADDRESS` | (Required) Sets the I2C Address for the Pimoroni Trackball. | `0x0A` | +|`PIMORONI_TRACKBALL_TIMEOUT` | (Optional) The timeout for i2c communication with the trackpad in milliseconds. | `100` | +|`PIMORONI_TRACKBALL_INTERVAL_MS` | (Optional) The update/read interval for the sensor in milliseconds. | `8` | +|`PIMORONI_TRACKBALL_SCALE` | (Optional) The multiplier used to generate reports from the sensor. | `5` | +|`PIMORONI_TRACKBALL_DEBOUNCE_CYCLES` | (Optional) The number of scan cycles used for debouncing on the ball press. | `20` | +|`PIMORONI_TRACKBALL_ERROR_COUNT` | (Optional) Specifies the number of read/write errors until the sensor is disabled. | `10` | + +### PMW 3360 Sensor + +To use the PMW 3360 sensor, add this to your `rules.mk` + +```make +POINTING_DEVICE_DRIVER = pmw3360 +``` + +The PMW 3360 is an SPI driven optical sensor, that uses a built in IR LED for surface tracking. + +| Setting | Description | Default | +|-----------------------------|--------------------------------------------------------------------------------------------|---------------| +|`PMW3360_CS_PIN` | (Required) Sets the Cable Select pin connected to the sensor. | _not defined_ | +|`PMW3360_CLOCK_SPEED` | (Optional) Sets the clock speed that the sensor runs at. | `2000000` | +|`PMW3360_SPI_LSBFIRST` | (Optional) Sets the Least/Most Significant Byte First setting for SPI. | `false` | +|`PMW3360_SPI_MODE` | (Optional) Sets the SPI Mode for the sensor. | `3` | +|`PMW3360_SPI_DIVISOR` | (Optional) Sets the SPI Divisor used for SPI communication. | _varies_ | +|`ROTATIONAL_TRANSFORM_ANGLE` | (Optional) Allows for the sensor data to be rotated +/- 30 degrees directly in the sensor. | `0` | + +The CPI range is 100-12000, in increments of 100. Defaults to 1600 CPI. + + +### Custom Driver + +If you have a sensor type that isn't supported here, you can manually implement it, by adding these functions (with the correct implementation for your device): + +```c +void pointing_device_driver_init(void) {} +report_mouse_t pointing_device_driver_get_report(report_mouse_t mouse_report) { return mouse_report; } +uint16_t pointing_device_driver_get_cpi(void) { return 0; } +void pointing_device_driver_set_cpi(uint16_t cpi) {} +``` + +!> Ideally, new sensor hardware should be added to `drivers/sensors/` and `quantum/pointing_device_drivers.c`, but there may be cases where it's very specific to the hardware. So these functions are provided, just in case. + +## Common Configuration + +| Setting | Description | Default | +|-------------------------------|-----------------------------------------------------------------------|---------------| +|`POINTING_DEVICE_ROTATION_90` | (Optional) Rotates the X and Y data by 90 degrees. | _not defined_ | +|`POINTING_DEVICE_ROTATION_180` | (Optional) Rotates the X and Y data by 180 degrees. | _not defined_ | +|`POINTING_DEVICE_ROTATION_270` | (Optional) Rotates the X and Y data by 270 degrees. | _not defined_ | +|`POINTING_DEVICE_INVERT_X` | (Optional) Inverts the X axis report. | _not defined_ | +|`POINTING_DEVICE_INVERT_Y` | (Optional) Inverts the Y axis report. | _not defined_ | +|`POINTING_DEVICE_MOTION_PIN` | (Optional) If supported, will only read from sensor if pin is active. | _not defined_ | + + +## Callbacks and Functions + +| Function | Description | +|-----------------------------------|----------------------------------------------------------------------------------------------------------------------------------------| +| `pointing_device_init_kb(void)` | Callback to allow for keyboard level initialization. Useful for additional hardware sensors. | +| `pointing_device_init_user(void)` | Callback to allow for user level initialization. Useful for additional hardware sensors. | +| `pointing_device_task_kb(mouse_report)` | Callback that sends sensor data, so keyboard code can intercept and modify the data. Returns a mouse report. | +| `pointing_device_task_user(mouse_report)` | Callback that sends sensor data, so user coe can intercept and modify the data. Returns a mouse report. | +| `pointing_device_handle_buttons(buttons, pressed, button)` | Callback to handle hardware button presses. Returns a `uint8_t`. | +| `pointing_device_get_cpi(void)` | Gets the current CPI/DPI setting from the sensor, if supported. | +| `pointing_device_set_cpi(uint16_t)` | Sets the CPI/DPI, if supported. | +| `pointing_device_get_report(void)` | Returns the current mouse report (as a `mouse_report_t` data structure). | +| `pointing_device_set_report(mouse_report)` | Sets the mouse report to the assigned `mouse_report_t` data structured passed to the function. | +| `pointing_device_send(void)` | Sends the current mouse report to the host system. Function can be replaced. | +| `has_mouse_report_changed(old, new)` | Compares the old and new `mouse_report_t` data and returns true only if it has changed. | + + +# Manipulating Mouse Reports + +The report_mouse_t (here "mouseReport") has the following properties: * `mouseReport.x` - this is a signed int from -127 to 127 (not 128, this is defined in USB HID spec) representing movement (+ to the right, - to the left) on the x axis. * `mouseReport.y` - this is a signed int from -127 to 127 (not 128, this is defined in USB HID spec) representing movement (+ upward, - downward) on the y axis. @@ -21,8 +207,10 @@ Keep in mind that a report_mouse_t (here "mouseReport") has the following proper * `mouseReport.h` - this is a signed int from -127 to 127 (not 128, this is defined in USB HID spec) representing horizontal scrolling (+ right, - left). * `mouseReport.buttons` - this is a uint8_t in which all 8 bits are used. These bits represent the mouse button state - bit 0 is mouse button 1, and bit 7 is mouse button 8. -Once you have made the necessary changes to the mouse report, you need to send it: +To manually manipulate the mouse reports outside of the `pointing_device_task_*` functions, you can use: +* `pointing_device_get_report()` - Returns the current report_mouse_t that represents the information sent to the host computer +* `pointing_device_set_report(report_mouse_t newMouseReport)` - Overrides and saves the report_mouse_t to be sent to the host computer * `pointing_device_send()` - Sends the mouse report to the host and zeroes out the report. When the mouse report is sent, the x, y, v, and h values are set to 0 (this is done in `pointing_device_send()`, which can be overridden to avoid this behavior). This way, button states persist, but movement will only occur once. For further customization, both `pointing_device_init` and `pointing_device_task` can be overridden. @@ -31,6 +219,8 @@ Additionally, by default, `pointing_device_send()` will only send a report when Also, you use the `has_mouse_report_changed(new, old)` function to check to see if the report has changed. +## Example + In the following example, a custom key is used to click the mouse and scroll 127 units vertically and horizontally, then undo all of that when released - because that's a totally useful function. Listen, this is an example: ```c diff --git a/drivers/sensors/adns5050.c b/drivers/sensors/adns5050.c index 254ef2ee87..c23d24d5af 100644 --- a/drivers/sensors/adns5050.c +++ b/drivers/sensors/adns5050.c @@ -20,81 +20,95 @@ #include "adns5050.h" #include "wait.h" #include "debug.h" -#include "print.h" #include "gpio.h" -#ifndef OPTIC_ROTATED -# define OPTIC_ROTATED false -#endif - -// Definitions for the ADNS serial line. -#ifndef ADNS_SCLK_PIN -# define ADNS_SCLK_PIN B7 -#endif - -#ifndef ADNS_SDIO_PIN -# define ADNS_SDIO_PIN C6 -#endif - -#ifndef ADNS_CS_PIN -# define ADNS_CS_PIN B4 -#endif - -#ifdef CONSOLE_ENABLE -void print_byte(uint8_t byte) { dprintf("%c%c%c%c%c%c%c%c|", (byte & 0x80 ? '1' : '0'), (byte & 0x40 ? '1' : '0'), (byte & 0x20 ? '1' : '0'), (byte & 0x10 ? '1' : '0'), (byte & 0x08 ? '1' : '0'), (byte & 0x04 ? '1' : '0'), (byte & 0x02 ? '1' : '0'), (byte & 0x01 ? '1' : '0')); } -#endif - -// Initialize the ADNS serial pins. -void adns_init(void) { - setPinOutput(ADNS_SCLK_PIN); - setPinOutput(ADNS_SDIO_PIN); - setPinOutput(ADNS_CS_PIN); +// Registers +// clang-format off +#define REG_PRODUCT_ID 0x00 +#define REG_REVISION_ID 0x01 +#define REG_MOTION 0x02 +#define REG_DELTA_X 0x03 +#define REG_DELTA_Y 0x04 +#define REG_SQUAL 0x05 +#define REG_SHUTTER_UPPER 0x06 +#define REG_SHUTTER_LOWER 0x07 +#define REG_MAXIMUM_PIXEL 0x08 +#define REG_PIXEL_SUM 0x09 +#define REG_MINIMUM_PIXEL 0x0a +#define REG_PIXEL_GRAB 0x0b +#define REG_MOUSE_CONTROL 0x0d +#define REG_MOUSE_CONTROL2 0x19 +#define REG_LED_DC_MODE 0x22 +#define REG_CHIP_RESET 0x3a +#define REG_PRODUCT_ID2 0x3e +#define REG_INV_REV_ID 0x3f +#define REG_MOTION_BURST 0x63 +// clang-format on + +void adns5050_init(void) { + // Initialize the ADNS serial pins. + setPinOutput(ADNS5050_SCLK_PIN); + setPinOutput(ADNS5050_SDIO_PIN); + setPinOutput(ADNS5050_CS_PIN); + + // reboot the adns. + // if the adns hasn't initialized yet, this is harmless. + adns5050_write_reg(REG_CHIP_RESET, 0x5a); + + // wait maximum time before adns is ready. + // this ensures that the adns is actuall ready after reset. + wait_ms(55); + + // read a burst from the adns and then discard it. + // gets the adns ready for write commands + // (for example, setting the dpi). + adns5050_read_burst(); } // Perform a synchronization with the ADNS. // Just as with the serial protocol, this is used by the slave to send a // synchronization signal to the master. -void adns_sync(void) { - writePinLow(ADNS_CS_PIN); +void adns5050_sync(void) { + writePinLow(ADNS5050_CS_PIN); wait_us(1); - writePinHigh(ADNS_CS_PIN); + writePinHigh(ADNS5050_CS_PIN); } -void adns_cs_select(void) { writePinLow(ADNS_CS_PIN); } +void adns5050_cs_select(void) { writePinLow(ADNS5050_CS_PIN); } -void adns_cs_deselect(void) { writePinHigh(ADNS_CS_PIN); } +void adns5050_cs_deselect(void) { writePinHigh(ADNS5050_CS_PIN); } -uint8_t adns_serial_read(void) { - setPinInput(ADNS_SDIO_PIN); +uint8_t adns5050_serial_read(void) { + setPinInput(ADNS5050_SDIO_PIN); uint8_t byte = 0; for (uint8_t i = 0; i < 8; ++i) { - writePinLow(ADNS_SCLK_PIN); + writePinLow(ADNS5050_SCLK_PIN); wait_us(1); - byte = (byte << 1) | readPin(ADNS_SDIO_PIN); + byte = (byte << 1) | readPin(ADNS5050_SDIO_PIN); - writePinHigh(ADNS_SCLK_PIN); + writePinHigh(ADNS5050_SCLK_PIN); wait_us(1); } return byte; } -void adns_serial_write(uint8_t data) { - setPinOutput(ADNS_SDIO_PIN); +void adns5050_serial_write(uint8_t data) { + setPinOutput(ADNS5050_SDIO_PIN); for (int8_t b = 7; b >= 0; b--) { - writePinLow(ADNS_SCLK_PIN); + writePinLow(ADNS5050_SCLK_PIN); if (data & (1 << b)) - writePinHigh(ADNS_SDIO_PIN); + writePinHigh(ADNS5050_SDIO_PIN); else - writePinLow(ADNS_SDIO_PIN); + writePinLow(ADNS5050_SDIO_PIN); wait_us(2); - writePinHigh(ADNS_SCLK_PIN); + writePinHigh(ADNS5050_SCLK_PIN); } // tSWR. See page 15 of the ADNS spec sheet. @@ -108,17 +122,17 @@ void adns_serial_write(uint8_t data) { // Read a byte of data from a register on the ADNS. // Don't forget to use the register map (as defined in the header file). -uint8_t adns_read_reg(uint8_t reg_addr) { - adns_cs_select(); +uint8_t adns5050_read_reg(uint8_t reg_addr) { + adns5050_cs_select(); - adns_serial_write(reg_addr); + adns5050_serial_write(reg_addr); // We don't need a minimum tSRAD here. That's because a 4ms wait time is - // already included in adns_serial_write(), so we're good. + // already included in adns5050_serial_write(), so we're good. // See page 10 and 15 of the ADNS spec sheet. // wait_us(4); - uint8_t byte = adns_serial_read(); + uint8_t byte = adns5050_serial_read(); // tSRW & tSRR. See page 15 of the ADNS spec sheet. // Technically, this is only necessary if the next operation is an SDIO @@ -126,38 +140,38 @@ uint8_t adns_read_reg(uint8_t reg_addr) { // Honestly, this wait could probably be removed. wait_us(1); - adns_cs_deselect(); + adns5050_cs_deselect(); return byte; } -void adns_write_reg(uint8_t reg_addr, uint8_t data) { - adns_cs_select(); - adns_serial_write(0b10000000 | reg_addr); - adns_serial_write(data); - adns_cs_deselect(); +void adns5050_write_reg(uint8_t reg_addr, uint8_t data) { + adns5050_cs_select(); + adns5050_serial_write(0b10000000 | reg_addr); + adns5050_serial_write(data); + adns5050_cs_deselect(); } -report_adns_t adns_read_burst(void) { - adns_cs_select(); +report_adns5050_t adns5050_read_burst(void) { + adns5050_cs_select(); - report_adns_t data; + report_adns5050_t data; data.dx = 0; data.dy = 0; - adns_serial_write(REG_MOTION_BURST); + adns5050_serial_write(REG_MOTION_BURST); // We don't need a minimum tSRAD here. That's because a 4ms wait time is - // already included in adns_serial_write(), so we're good. + // already included in adns5050_serial_write(), so we're good. // See page 10 and 15 of the ADNS spec sheet. // wait_us(4); - uint8_t x = adns_serial_read(); - uint8_t y = adns_serial_read(); + uint8_t x = adns5050_serial_read(); + uint8_t y = adns5050_serial_read(); // Burst mode returns a bunch of other shit that we don't really need. // Setting CS to high ends burst mode early. - adns_cs_deselect(); + adns5050_cs_deselect(); data.dx = convert_twoscomp(x); data.dy = convert_twoscomp(y); @@ -175,12 +189,21 @@ int8_t convert_twoscomp(uint8_t data) { } // Don't forget to use the definitions for CPI in the header file. -void adns_set_cpi(uint8_t cpi) { adns_write_reg(REG_MOUSE_CONTROL2, cpi); } +void adns5050_set_cpi(uint16_t cpi) { + uint8_t cpival = constrain((cpi / 125), 0x1, 0xD); // limits to 0--119 + + adns5050_write_reg(REG_MOUSE_CONTROL2, 0b10000 | cpival); +} + +uint16_t adns5050_get_cpi(void) { + uint8_t cpival = adns5050_read_reg(REG_MOUSE_CONTROL2); + return (uint16_t)((cpival & 0b10000) * 125); +} -bool adns_check_signature(void) { - uint8_t pid = adns_read_reg(REG_PRODUCT_ID); - uint8_t rid = adns_read_reg(REG_REVISION_ID); - uint8_t pid2 = adns_read_reg(REG_PRODUCT_ID2); +bool adns5050_check_signature(void) { + uint8_t pid = adns5050_read_reg(REG_PRODUCT_ID); + uint8_t rid = adns5050_read_reg(REG_REVISION_ID); + uint8_t pid2 = adns5050_read_reg(REG_PRODUCT_ID2); return (pid == 0x12 && rid == 0x01 && pid2 == 0x26); } diff --git a/drivers/sensors/adns5050.h b/drivers/sensors/adns5050.h index 5e9edc2962..e45a250196 100644 --- a/drivers/sensors/adns5050.h +++ b/drivers/sensors/adns5050.h @@ -21,59 +21,52 @@ #include -// Registers -#define REG_PRODUCT_ID 0x00 -#define REG_REVISION_ID 0x01 -#define REG_MOTION 0x02 -#define REG_DELTA_X 0x03 -#define REG_DELTA_Y 0x04 -#define REG_SQUAL 0x05 -#define REG_SHUTTER_UPPER 0x06 -#define REG_SHUTTER_LOWER 0x07 -#define REG_MAXIMUM_PIXEL 0x08 -#define REG_PIXEL_SUM 0x09 -#define REG_MINIMUM_PIXEL 0x0a -#define REG_PIXEL_GRAB 0x0b -#define REG_MOUSE_CONTROL 0x0d -#define REG_MOUSE_CONTROL2 0x19 -#define REG_LED_DC_MODE 0x22 -#define REG_CHIP_RESET 0x3a -#define REG_PRODUCT_ID2 0x3e -#define REG_INV_REV_ID 0x3f -#define REG_MOTION_BURST 0x63 - // CPI values -#define CPI125 0x11 -#define CPI250 0x12 -#define CPI375 0x13 -#define CPI500 0x14 -#define CPI625 0x15 -#define CPI750 0x16 -#define CPI875 0x17 +// clang-format off +#define CPI125 0x11 +#define CPI250 0x12 +#define CPI375 0x13 +#define CPI500 0x14 +#define CPI625 0x15 +#define CPI750 0x16 +#define CPI875 0x17 #define CPI1000 0x18 #define CPI1125 0x19 #define CPI1250 0x1a #define CPI1375 0x1b +// clang-format on + +#define constrain(amt, low, high) ((amt) < (low) ? (low) : ((amt) > (high) ? (high) : (amt))) + +// Definitions for the ADNS serial line. +#ifndef ADNS5050_SCLK_PIN +# error "No clock pin defined -- missing ADNS5050_SCLK_PIN" +#endif + +#ifndef ADNS5050_SDIO_PIN +# error "No data pin defined -- missing ADNS5050_SDIO_PIN" +#endif -#ifdef CONSOLE_ENABLE -void print_byte(uint8_t byte); +#ifndef ADNS5050_CS_PIN +# error "No chip select pin defined -- missing ADNS5050_CS_PIN" #endif typedef struct { int8_t dx; int8_t dy; -} report_adns_t; +} report_adns5050_t; // A bunch of functions to implement the ADNS5050-specific serial protocol. // Note that the "serial.h" driver is insufficient, because it does not // manually manipulate a serial clock signal. -void adns_init(void); -void adns_sync(void); -uint8_t adns_serial_read(void); -void adns_serial_write(uint8_t data); -uint8_t adns_read_reg(uint8_t reg_addr); -void adns_write_reg(uint8_t reg_addr, uint8_t data); -report_adns_t adns_read_burst(void); -int8_t convert_twoscomp(uint8_t data); -void adns_set_cpi(uint8_t cpi); -bool adns_check_signature(void); +void adns5050_init(void); +void adns5050_sync(void); +uint8_t adns5050_serial_read(void); +void adns5050_serial_write(uint8_t data); +uint8_t adns5050_read_reg(uint8_t reg_addr); +void adns5050_write_reg(uint8_t reg_addr, uint8_t data); +report_adns5050_t adns5050_read_burst(void); +void adns5050_set_cpi(uint16_t cpi); +uint16_t adns5050_get_cpi(void); +int8_t convert_twoscomp(uint8_t data); +bool adns5050_check_signature(void); diff --git a/drivers/sensors/adns9800.c b/drivers/sensors/adns9800.c index b4f683452c..c52f991804 100644 --- a/drivers/sensors/adns9800.c +++ b/drivers/sensors/adns9800.c @@ -15,83 +15,80 @@ */ #include "spi_master.h" -#include "quantum.h" #include "adns9800_srom_A6.h" #include "adns9800.h" +#include "wait.h" // registers -#define REG_Product_ID 0x00 -#define REG_Revision_ID 0x01 -#define REG_Motion 0x02 -#define REG_Delta_X_L 0x03 -#define REG_Delta_X_H 0x04 -#define REG_Delta_Y_L 0x05 -#define REG_Delta_Y_H 0x06 -#define REG_SQUAL 0x07 -#define REG_Pixel_Sum 0x08 -#define REG_Maximum_Pixel 0x09 -#define REG_Minimum_Pixel 0x0a -#define REG_Shutter_Lower 0x0b -#define REG_Shutter_Upper 0x0c -#define REG_Frame_Period_Lower 0x0d -#define REG_Frame_Period_Upper 0x0e -#define REG_Configuration_I 0x0f -#define REG_Configuration_II 0x10 -#define REG_Frame_Capture 0x12 -#define REG_SROM_Enable 0x13 -#define REG_Run_Downshift 0x14 -#define REG_Rest1_Rate 0x15 -#define REG_Rest1_Downshift 0x16 -#define REG_Rest2_Rate 0x17 -#define REG_Rest2_Downshift 0x18 -#define REG_Rest3_Rate 0x19 +// clang-format off +#define REG_Product_ID 0x00 +#define REG_Revision_ID 0x01 +#define REG_Motion 0x02 +#define REG_Delta_X_L 0x03 +#define REG_Delta_X_H 0x04 +#define REG_Delta_Y_L 0x05 +#define REG_Delta_Y_H 0x06 +#define REG_SQUAL 0x07 +#define REG_Pixel_Sum 0x08 +#define REG_Maximum_Pixel 0x09 +#define REG_Minimum_Pixel 0x0a +#define REG_Shutter_Lower 0x0b +#define REG_Shutter_Upper 0x0c +#define REG_Frame_Period_Lower 0x0d +#define REG_Frame_Period_Upper 0x0e +#define REG_Configuration_I 0x0f +#define REG_Configuration_II 0x10 +#define REG_Frame_Capture 0x12 +#define REG_SROM_Enable 0x13 +#define REG_Run_Downshift 0x14 +#define REG_Rest1_Rate 0x15 +#define REG_Rest1_Downshift 0x16 +#define REG_Rest2_Rate 0x17 +#define REG_Rest2_Downshift 0x18 +#define REG_Rest3_Rate 0x19 #define REG_Frame_Period_Max_Bound_Lower 0x1a #define REG_Frame_Period_Max_Bound_Upper 0x1b #define REG_Frame_Period_Min_Bound_Lower 0x1c #define REG_Frame_Period_Min_Bound_Upper 0x1d -#define REG_Shutter_Max_Bound_Lower 0x1e -#define REG_Shutter_Max_Bound_Upper 0x1f -#define REG_LASER_CTRL0 0x20 -#define REG_Observation 0x24 -#define REG_Data_Out_Lower 0x25 -#define REG_Data_Out_Upper 0x26 -#define REG_SROM_ID 0x2a -#define REG_Lift_Detection_Thr 0x2e -#define REG_Configuration_V 0x2f -#define REG_Configuration_IV 0x39 -#define REG_Power_Up_Reset 0x3a -#define REG_Shutdown 0x3b -#define REG_Inverse_Product_ID 0x3f -#define REG_Motion_Burst 0x50 -#define REG_SROM_Load_Burst 0x62 -#define REG_Pixel_Burst 0x64 - -#define ADNS_CLOCK_SPEED 2000000 -#define MIN_CPI 200 -#define MAX_CPI 8200 -#define CPI_STEP 200 -#define CLAMP_CPI(value) value MAX_CPI ? MAX_CPI : value -#define SPI_MODE 3 -#define SPI_DIVISOR (F_CPU / ADNS_CLOCK_SPEED) +#define REG_Shutter_Max_Bound_Lower 0x1e +#define REG_Shutter_Max_Bound_Upper 0x1f +#define REG_LASER_CTRL0 0x20 +#define REG_Observation 0x24 +#define REG_Data_Out_Lower 0x25 +#define REG_Data_Out_Upper 0x26 +#define REG_SROM_ID 0x2a +#define REG_Lift_Detection_Thr 0x2e +#define REG_Configuration_V 0x2f +#define REG_Configuration_IV 0x39 +#define REG_Power_Up_Reset 0x3a +#define REG_Shutdown 0x3b +#define REG_Inverse_Product_ID 0x3f +#define REG_Motion_Burst 0x50 +#define REG_SROM_Load_Burst 0x62 +#define REG_Pixel_Burst 0x64 + +#define MIN_CPI 200 +#define MAX_CPI 8200 +#define CPI_STEP 200 +#define CLAMP_CPI(value) value MAX_CPI ? MAX_CPI : value #define US_BETWEEN_WRITES 120 -#define US_BETWEEN_READS 20 -#define US_BEFORE_MOTION 100 -#define MSB1 0x80 +#define US_BETWEEN_READS 20 +#define US_BEFORE_MOTION 100 +#define MSB1 0x80 +// clang-format on -extern const uint8_t firmware_data[]; +void adns9800_spi_start(void) { spi_start(ADNS9800_CS_PIN, false, ADNS9800_SPI_MODE, ADNS9800_SPI_DIVISOR); } -void adns_spi_start(void) { spi_start(SPI_SS_PIN, false, SPI_MODE, SPI_DIVISOR); } - -void adns_write(uint8_t reg_addr, uint8_t data) { - adns_spi_start(); +void adns9800_write(uint8_t reg_addr, uint8_t data) { + adns9800_spi_start(); spi_write(reg_addr | MSB1); spi_write(data); spi_stop(); wait_us(US_BETWEEN_WRITES); } -uint8_t adns_read(uint8_t reg_addr) { - adns_spi_start(); +uint8_t adns9800_read(uint8_t reg_addr) { + adns9800_spi_start(); spi_write(reg_addr & 0x7f); uint8_t data = spi_read(); spi_stop(); @@ -100,39 +97,39 @@ uint8_t adns_read(uint8_t reg_addr) { return data; } -void adns_init() { - setPinOutput(SPI_SS_PIN); +void adns9800_init() { + setPinOutput(ADNS9800_CS_PIN); spi_init(); // reboot - adns_write(REG_Power_Up_Reset, 0x5a); + adns9800_write(REG_Power_Up_Reset, 0x5a); wait_ms(50); // read registers and discard - adns_read(REG_Motion); - adns_read(REG_Delta_X_L); - adns_read(REG_Delta_X_H); - adns_read(REG_Delta_Y_L); - adns_read(REG_Delta_Y_H); + adns9800_read(REG_Motion); + adns9800_read(REG_Delta_X_L); + adns9800_read(REG_Delta_X_H); + adns9800_read(REG_Delta_Y_L); + adns9800_read(REG_Delta_Y_H); // upload firmware // 3k firmware mode - adns_write(REG_Configuration_IV, 0x02); + adns9800_write(REG_Configuration_IV, 0x02); // enable initialisation - adns_write(REG_SROM_Enable, 0x1d); + adns9800_write(REG_SROM_Enable, 0x1d); // wait a frame wait_ms(10); // start SROM download - adns_write(REG_SROM_Enable, 0x18); + adns9800_write(REG_SROM_Enable, 0x18); // write the SROM file - adns_spi_start(); + adns9800_spi_start(); spi_write(REG_SROM_Load_Burst | 0x80); wait_us(15); @@ -140,7 +137,7 @@ void adns_init() { // send all bytes of the firmware unsigned char c; for (int i = 0; i < FIRMWARE_LENGTH; i++) { - c = (unsigned char)pgm_read_byte(firmware_data + i); + c = (unsigned char)pgm_read_byte(adns9800_firmware_data + i); spi_write(c); wait_us(15); } @@ -150,18 +147,30 @@ void adns_init() { wait_ms(10); // enable laser - uint8_t laser_ctrl0 = adns_read(REG_LASER_CTRL0); - adns_write(REG_LASER_CTRL0, laser_ctrl0 & 0xf0); + uint8_t laser_ctrl0 = adns9800_read(REG_LASER_CTRL0); + adns9800_write(REG_LASER_CTRL0, laser_ctrl0 & 0xf0); + + adns9800_set_cpi(ADNS9800_CPI); } -config_adns_t adns_get_config(void) { - uint8_t config_1 = adns_read(REG_Configuration_I); - return (config_adns_t){(config_1 & 0xFF) * CPI_STEP}; +config_adns9800_t adns9800_get_config(void) { + uint8_t config_1 = adns9800_read(REG_Configuration_I); + return (config_adns9800_t){(config_1 & 0xFF) * CPI_STEP}; } -void adns_set_config(config_adns_t config) { +void adns9800_set_config(config_adns9800_t config) { uint8_t config_1 = (CLAMP_CPI(config.cpi) / CPI_STEP) & 0xFF; - adns_write(REG_Configuration_I, config_1); + adns9800_write(REG_Configuration_I, config_1); +} + +uint16_t adns9800_get_cpi(void) { + uint8_t config_1 = adns9800_read(REG_Configuration_I); + return (uint16_t){(config_1 & 0xFF) * CPI_STEP}; +} + +void adns9800_set_cpi(uint16_t cpi) { + uint8_t config_1 = (CLAMP_CPI(cpi) / CPI_STEP) & 0xFF; + adns9800_write(REG_Configuration_I, config_1); } static int16_t convertDeltaToInt(uint8_t high, uint8_t low) { @@ -174,10 +183,10 @@ static int16_t convertDeltaToInt(uint8_t high, uint8_t low) { return twos_comp; } -report_adns_t adns_get_report(void) { - report_adns_t report = {0, 0}; +report_adns9800_t adns9800_get_report(void) { + report_adns9800_t report = {0, 0}; - adns_spi_start(); + adns9800_spi_start(); // start burst mode spi_write(REG_Motion_Burst & 0x7f); diff --git a/drivers/sensors/adns9800.h b/drivers/sensors/adns9800.h index d19ded4012..e75a869c03 100644 --- a/drivers/sensors/adns9800.h +++ b/drivers/sensors/adns9800.h @@ -18,18 +18,48 @@ #include +#ifndef ADNS9800_CPI +# define ADNS9800_CPI 1600 +#endif + +#ifndef ADNS9800_CLOCK_SPEED +# define ADNS9800_CLOCK_SPEED 2000000 +#endif + +#ifndef ADNS9800_SPI_LSBFIRST +# define ADNS9800_SPI_LSBFIRST false +#endif + +#ifndef ADNS9800_SPI_MODE +# define ADNS9800_SPI_MODE 3 +#endif + +#ifndef ADNS9800_SPI_DIVISOR +# ifdef __AVR__ +# define ADNS9800_SPI_DIVISOR (F_CPU / ADNS9800_CLOCK_SPEED) +# else +# define ADNS9800_SPI_DIVISOR 64 +# endif +#endif + +#ifndef ADNS9800_CS_PIN +# error "No chip select pin defined -- missing ADNS9800_CS_PIN" +#endif + typedef struct { /* 200 - 8200 CPI supported */ uint16_t cpi; -} config_adns_t; +} config_adns9800_t; typedef struct { int16_t x; int16_t y; -} report_adns_t; +} report_adns9800_t; -void adns_init(void); -config_adns_t adns_get_config(void); -void adns_set_config(config_adns_t); +void adns9800_init(void); +config_adns9800_t adns9800_get_config(void); +void adns9800_set_config(config_adns9800_t); +uint16_t adns9800_get_cpi(void); +void adns9800_set_cpi(uint16_t cpi); /* Reads and clears the current delta values on the ADNS sensor */ -report_adns_t adns_get_report(void); +report_adns9800_t adns9800_get_report(void); diff --git a/drivers/sensors/adns9800_srom_A6.h b/drivers/sensors/adns9800_srom_A6.h index e698a401b9..d86ecbbd9e 100644 --- a/drivers/sensors/adns9800_srom_A6.h +++ b/drivers/sensors/adns9800_srom_A6.h @@ -6,7 +6,7 @@ // clang-format off -const uint8_t firmware_data[FIRMWARE_LENGTH] PROGMEM = { +const uint8_t adns9800_firmware_data[FIRMWARE_LENGTH] PROGMEM = { 0x03, 0xA6, 0x68, 0x1E, 0x7D, 0x10, 0x7E, 0x7E, 0x5F, 0x1C, 0xB8, 0xF2, 0x47, 0x0C, 0x7B, 0x74, 0x4B, 0x14, 0x8B, 0x75, 0x66, 0x51, 0x0B, 0x8C, 0x76, 0x74, 0x4B, 0x14, 0xAA, 0xD6, 0x0F, 0x9C, 0xBA, 0xF6, 0x6E, 0x3F, 0xDD, 0x38, 0xD5, 0x02, 0x80, 0x9B, 0x82, 0x6D, 0x58, 0x13, 0xA4, 0xAB, diff --git a/drivers/sensors/analog_joystick.c b/drivers/sensors/analog_joystick.c new file mode 100644 index 0000000000..0f4d1d7a4c --- /dev/null +++ b/drivers/sensors/analog_joystick.c @@ -0,0 +1,94 @@ +/* Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "analog_joystick.h" +#include "analog.h" +#include "gpio.h" +#include "wait.h" + +// Set Parameters +uint16_t minAxisValue = ANALOG_JOYSTICK_AXIS_MIN; +uint16_t maxAxisValue = ANALOG_JOYSTICK_AXIS_MAX; + +uint8_t maxCursorSpeed = ANALOG_JOYSTICK_SPEED_MAX; +uint8_t speedRegulator = ANALOG_JOYSTICK_SPEED_REGULATOR; // Lower Values Create Faster Movement + +int16_t xOrigin, yOrigin; + +uint16_t lastCursor = 0; + +int16_t axisCoordinate(uint8_t pin, uint16_t origin) { + int8_t direction; + int16_t distanceFromOrigin; + int16_t range; + + int16_t position = analogReadPin(pin); + + if (origin == position) { + return 0; + } else if (origin > position) { + distanceFromOrigin = origin - position; + range = origin - minAxisValue; + direction = -1; + } else { + distanceFromOrigin = position - origin; + range = maxAxisValue - origin; + direction = 1; + } + + float percent = (float)distanceFromOrigin / range; + int16_t coordinate = (int16_t)(percent * 100); + if (coordinate < 0) { + return 0; + } else if (coordinate > 100) { + return 100 * direction; + } else { + return coordinate * direction; + } +} + +int8_t axisToMouseComponent(uint8_t pin, int16_t origin, uint8_t maxSpeed) { + int16_t coordinate = axisCoordinate(pin, origin); + if (coordinate != 0) { + float percent = (float)coordinate / 100; + return percent * maxCursorSpeed * (abs(coordinate) / speedRegulator); + } else { + return 0; + } +} + +report_analog_joystick_t analog_joystick_read(void) { + report_analog_joystick_t report = {0}; + + if (timer_elapsed(lastCursor) > ANALOG_JOYSTICK_READ_INTERVAL) { + lastCursor = timer_read(); + report.x = axisToMouseComponent(ANALOG_JOYSTICK_X_AXIS_PIN, xOrigin, maxCursorSpeed); + report.y = axisToMouseComponent(ANALOG_JOYSTICK_Y_AXIS_PIN, yOrigin, maxCursorSpeed); + } +#ifdef ANALOG_JOYSTICK_CLICK_PIN + report.button = !readPin(ANALOG_JOYSTICK_CLICK_PIN); +#endif + return report; +} + +void analog_joystick_init(void) { +#ifdef ANALOG_JOYSTICK_CLICK_PIN + setPinInputHigh(ANALOG_JOYSTICK_CLICK_PIN); +#endif + // Account for drift + xOrigin = analogReadPin(ANALOG_JOYSTICK_X_AXIS_PIN); + yOrigin = analogReadPin(ANALOG_JOYSTICK_Y_AXIS_PIN); +} diff --git a/drivers/sensors/analog_joystick.h b/drivers/sensors/analog_joystick.h new file mode 100644 index 0000000000..6892a08817 --- /dev/null +++ b/drivers/sensors/analog_joystick.h @@ -0,0 +1,51 @@ +/* Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include +#include + +#ifndef ANALOG_JOYSTICK_X_AXIS_PIN +# error No pin specified for X Axis +#endif +#ifndef ANALOG_JOYSTICK_Y_AXIS_PIN +# error No pin specified for Y Axis +#endif + +#ifndef ANALOG_JOYSTICK_AXIS_MIN +# define ANALOG_JOYSTICK_AXIS_MIN 0 +#endif +#ifndef ANALOG_JOYSTICK_AXIS_MAX +# define ANALOG_JOYSTICK_AXIS_MAX 1023 +#endif +#ifndef ANALOG_JOYSTICK_SPEED_REGULATOR +# define ANALOG_JOYSTICK_SPEED_REGULATOR 20 +#endif +#ifndef ANALOG_JOYSTICK_READ_INTERVAL +# define ANALOG_JOYSTICK_READ_INTERVAL 10 +#endif +#ifndef ANALOG_JOYSTICK_SPEED_MAX +# define ANALOG_JOYSTICK_SPEED_MAX 2 +#endif + +typedef struct { + int8_t x; + int8_t y; + bool button; +} report_analog_joystick_t; +report_analog_joystick_t analog_joystick_read(void); +void analog_joystick_init(void); diff --git a/drivers/sensors/cirque_pinnacle.c b/drivers/sensors/cirque_pinnacle.c new file mode 100644 index 0000000000..b807c4f076 --- /dev/null +++ b/drivers/sensors/cirque_pinnacle.c @@ -0,0 +1,232 @@ +// Copyright (c) 2018 Cirque Corp. Restrictions apply. See: www.cirque.com/sw-license +#include "cirque_pinnacle.h" +#include "print.h" +#include "debug.h" +#include "wait.h" + +// Registers for RAP +// clang-format off +#define FIRMWARE_ID 0x00 +#define FIRMWARE_VERSION_C 0x01 +#define STATUS_1 0x02 +#define SYSCONFIG_1 0x03 +#define FEEDCONFIG_1 0x04 +#define FEEDCONFIG_2 0x05 +#define CALIBRATION_CONFIG_1 0x07 +#define PS2_AU_CONTROL 0x08 +#define SAMPLE_RATE 0x09 +#define Z_IDLE_COUNT 0x0A +#define Z_SCALER 0x0B +#define SLEEP_INTERVAL 0x0C +#define SLEEP_TIMER 0x0D +#define PACKET_BYTE_0 0x12 +#define PACKET_BYTE_1 0x13 +#define PACKET_BYTE_2 0x14 +#define PACKET_BYTE_3 0x15 +#define PACKET_BYTE_4 0x16 +#define PACKET_BYTE_5 0x17 + +#define ERA_VALUE 0x1B +#define ERA_HIGH_BYTE 0x1C +#define ERA_LOW_BYTE 0x1D +#define ERA_CONTROL 0x1E + +// ADC-attenuation settings (held in BIT_7 and BIT_6) +// 1X = most sensitive, 4X = least sensitive +#define ADC_ATTENUATE_1X 0x00 +#define ADC_ATTENUATE_2X 0x40 +#define ADC_ATTENUATE_3X 0x80 +#define ADC_ATTENUATE_4X 0xC0 + +// Register config values for this demo +#define SYSCONFIG_1_VALUE 0x00 +#define FEEDCONFIG_1_VALUE 0x03 // 0x03 for absolute mode 0x01 for relative mode +#define FEEDCONFIG_2_VALUE 0x1C // 0x1F for normal functionality 0x1E for intellimouse disabled +#define Z_IDLE_COUNT_VALUE 0x05 +// clang-format on + +bool touchpad_init; +uint16_t scale_data = 1024; + +void cirque_pinnacle_clear_flags(void); +void cirque_pinnacle_enable_feed(bool feedEnable); +void RAP_ReadBytes(uint8_t address, uint8_t* data, uint8_t count); +void RAP_Write(uint8_t address, uint8_t data); + +#ifdef CONSOLE_ENABLE +void print_byte(uint8_t byte) { xprintf("%c%c%c%c%c%c%c%c|", (byte & 0x80 ? '1' : '0'), (byte & 0x40 ? '1' : '0'), (byte & 0x20 ? '1' : '0'), (byte & 0x10 ? '1' : '0'), (byte & 0x08 ? '1' : '0'), (byte & 0x04 ? '1' : '0'), (byte & 0x02 ? '1' : '0'), (byte & 0x01 ? '1' : '0')); } +#endif + +/* Logical Scaling Functions */ +// Clips raw coordinates to "reachable" window of sensor +// NOTE: values outside this window can only appear as a result of noise +void ClipCoordinates(pinnacle_data_t* coordinates) { + if (coordinates->xValue < CIRQUE_PINNACLE_X_LOWER) { + coordinates->xValue = CIRQUE_PINNACLE_X_LOWER; + } else if (coordinates->xValue > CIRQUE_PINNACLE_X_UPPER) { + coordinates->xValue = CIRQUE_PINNACLE_X_UPPER; + } + if (coordinates->yValue < CIRQUE_PINNACLE_Y_LOWER) { + coordinates->yValue = CIRQUE_PINNACLE_Y_LOWER; + } else if (coordinates->yValue > CIRQUE_PINNACLE_Y_UPPER) { + coordinates->yValue = CIRQUE_PINNACLE_Y_UPPER; + } +} + +uint16_t cirque_pinnacle_get_scale(void) { return scale_data; } +void cirque_pinnacle_set_scale(uint16_t scale) { scale_data = scale; } + +// Scales data to desired X & Y resolution +void cirque_pinnacle_scale_data(pinnacle_data_t* coordinates, uint16_t xResolution, uint16_t yResolution) { + uint32_t xTemp = 0; + uint32_t yTemp = 0; + + ClipCoordinates(coordinates); + + xTemp = coordinates->xValue; + yTemp = coordinates->yValue; + + // translate coordinates to (0, 0) reference by subtracting edge-offset + xTemp -= CIRQUE_PINNACLE_X_LOWER; + yTemp -= CIRQUE_PINNACLE_Y_LOWER; + + // scale coordinates to (xResolution, yResolution) range + coordinates->xValue = (uint16_t)(xTemp * xResolution / CIRQUE_PINNACLE_X_RANGE); + coordinates->yValue = (uint16_t)(yTemp * yResolution / CIRQUE_PINNACLE_Y_RANGE); +} + +// Clears Status1 register flags (SW_CC and SW_DR) +void cirque_pinnacle_clear_flags() { + RAP_Write(STATUS_1, 0x00); + wait_us(50); +} + +// Enables/Disables the feed +void cirque_pinnacle_enable_feed(bool feedEnable) { + uint8_t temp; + + RAP_ReadBytes(FEEDCONFIG_1, &temp, 1); // Store contents of FeedConfig1 register + + if (feedEnable) { + temp |= 0x01; // Set Feed Enable bit + RAP_Write(0x04, temp); + } else { + temp &= ~0x01; // Clear Feed Enable bit + RAP_Write(0x04, temp); + } +} + +/* ERA (Extended Register Access) Functions */ +// Reads bytes from an extended register at
    (16-bit address), +// stores values in <*data> +void ERA_ReadBytes(uint16_t address, uint8_t* data, uint16_t count) { + uint8_t ERAControlValue = 0xFF; + + cirque_pinnacle_enable_feed(false); // Disable feed + + RAP_Write(ERA_HIGH_BYTE, (uint8_t)(address >> 8)); // Send upper byte of ERA address + RAP_Write(ERA_LOW_BYTE, (uint8_t)(address & 0x00FF)); // Send lower byte of ERA address + + for (uint16_t i = 0; i < count; i++) { + RAP_Write(ERA_CONTROL, 0x05); // Signal ERA-read (auto-increment) to Pinnacle + + // Wait for status register 0x1E to clear + do { + RAP_ReadBytes(ERA_CONTROL, &ERAControlValue, 1); + } while (ERAControlValue != 0x00); + + RAP_ReadBytes(ERA_VALUE, data + i, 1); + + cirque_pinnacle_clear_flags(); + } +} + +// Writes a byte, , to an extended register at
    (16-bit address) +void ERA_WriteByte(uint16_t address, uint8_t data) { + uint8_t ERAControlValue = 0xFF; + + cirque_pinnacle_enable_feed(false); // Disable feed + + RAP_Write(ERA_VALUE, data); // Send data byte to be written + + RAP_Write(ERA_HIGH_BYTE, (uint8_t)(address >> 8)); // Upper byte of ERA address + RAP_Write(ERA_LOW_BYTE, (uint8_t)(address & 0x00FF)); // Lower byte of ERA address + + RAP_Write(ERA_CONTROL, 0x02); // Signal an ERA-write to Pinnacle + + // Wait for status register 0x1E to clear + do { + RAP_ReadBytes(ERA_CONTROL, &ERAControlValue, 1); + } while (ERAControlValue != 0x00); + + cirque_pinnacle_clear_flags(); +} + +void cirque_pinnacle_set_adc_attenuation(uint8_t adcGain) { + uint8_t temp = 0x00; + + ERA_ReadBytes(0x0187, &temp, 1); + temp &= 0x3F; // clear top two bits + temp |= adcGain; + ERA_WriteByte(0x0187, temp); + ERA_ReadBytes(0x0187, &temp, 1); +} + +// Changes thresholds to improve detection of fingers +void cirque_pinnacle_tune_edge_sensitivity(void) { + uint8_t temp = 0x00; + + ERA_ReadBytes(0x0149, &temp, 1); + ERA_WriteByte(0x0149, 0x04); + ERA_ReadBytes(0x0149, &temp, 1); + + ERA_ReadBytes(0x0168, &temp, 1); + ERA_WriteByte(0x0168, 0x03); + ERA_ReadBytes(0x0168, &temp, 1); +} + +/* Pinnacle-based TM040040 Functions */ +void cirque_pinnacle_init(void) { +#if defined(POINTING_DEVICE_DRIVER_cirque_pinnacle_spi) + spi_init(); +#elif defined(POINTING_DEVICE_DRIVER_cirque_pinnacle_i2c) + i2c_init(); +#endif + + touchpad_init = true; + // Host clears SW_CC flag + cirque_pinnacle_clear_flags(); + + // Host configures bits of registers 0x03 and 0x05 + RAP_Write(SYSCONFIG_1, SYSCONFIG_1_VALUE); + RAP_Write(FEEDCONFIG_2, FEEDCONFIG_2_VALUE); + + // Host enables preferred output mode (absolute) + RAP_Write(FEEDCONFIG_1, FEEDCONFIG_1_VALUE); + + // Host sets z-idle packet count to 5 (default is 30) + RAP_Write(Z_IDLE_COUNT, Z_IDLE_COUNT_VALUE); + + cirque_pinnacle_set_adc_attenuation(0xFF); + cirque_pinnacle_tune_edge_sensitivity(); + cirque_pinnacle_enable_feed(true); +} + +// Reads XYZ data from Pinnacle registers 0x14 through 0x17 +// Stores result in pinnacle_data_t struct with xValue, yValue, and zValue members +pinnacle_data_t cirque_pinnacle_read_data(void) { + uint8_t data[6] = {0}; + pinnacle_data_t result = {0}; + RAP_ReadBytes(PACKET_BYTE_0, data, 6); + + cirque_pinnacle_clear_flags(); + + result.buttonFlags = data[0] & 0x3F; + result.xValue = data[2] | ((data[4] & 0x0F) << 8); + result.yValue = data[3] | ((data[4] & 0xF0) << 4); + result.zValue = data[5] & 0x3F; + + result.touchDown = (result.xValue != 0 || result.yValue != 0); + + return result; +} diff --git a/drivers/sensors/cirque_pinnacle.h b/drivers/sensors/cirque_pinnacle.h new file mode 100644 index 0000000000..db891122a6 --- /dev/null +++ b/drivers/sensors/cirque_pinnacle.h @@ -0,0 +1,74 @@ +// Copyright (c) 2018 Cirque Corp. Restrictions apply. See: www.cirque.com/sw-license + +#pragma once + +#include +#include + +// Convenient way to store and access measurements +typedef struct { + uint16_t xValue; + uint16_t yValue; + uint16_t zValue; + uint8_t buttonFlags; + bool touchDown; +} pinnacle_data_t; + +void cirque_pinnacle_init(void); +pinnacle_data_t cirque_pinnacle_read_data(void); +void cirque_pinnacle_scale_data(pinnacle_data_t* coordinates, uint16_t xResolution, uint16_t yResolution); +uint16_t cirque_pinnacle_get_scale(void); +void cirque_pinnacle_set_scale(uint16_t scale); + +#ifndef CIRQUE_PINNACLE_TIMEOUT +# define CIRQUE_PINNACLE_TIMEOUT 20 +#endif + +// Coordinate scaling values +#ifndef CIRQUE_PINNACLE_X_LOWER +# define CIRQUE_PINNACLE_X_LOWER 127 // min "reachable" X value +#endif +#ifndef CIRQUE_PINNACLE_X_UPPER +# define CIRQUE_PINNACLE_X_UPPER 1919 // max "reachable" X value +#endif +#ifndef CIRQUE_PINNACLE_Y_LOWER +# define CIRQUE_PINNACLE_Y_LOWER 63 // min "reachable" Y value +#endif +#ifndef CIRQUE_PINNACLE_Y_UPPER +# define CIRQUE_PINNACLE_Y_UPPER 1471 // max "reachable" Y value +#endif +#ifndef CIRQUE_PINNACLE_X_RANGE +# define CIRQUE_PINNACLE_X_RANGE (CIRQUE_PINNACLE_X_UPPER - CIRQUE_PINNACLE_X_LOWER) +#endif +#ifndef CIRQUE_PINNACLE_Y_RANGE +# define CIRQUE_PINNACLE_Y_RANGE (CIRQUE_PINNACLE_Y_UPPER - CIRQUE_PINNACLE_Y_LOWER) +#endif + +#if defined(POINTING_DEVICE_DRIVER_cirque_pinnacle_i2c) +# include "i2c_master.h" +// Cirque's 7-bit I2C Slave Address +# ifndef CIRQUE_PINNACLE_ADDR +# define CIRQUE_PINNACLE_ADDR 0x2A +# endif +#elif defined(POINTING_DEVICE_DRIVER_cirque_pinnacle_spi) +# include "spi_master.h" +# ifndef CIRQUE_PINNACLE_CLOCK_SPEED +# define CIRQUE_PINNACLE_CLOCK_SPEED 10000000 +# endif +# ifndef CIRQUE_PINNACLE_SPI_LSBFIRST +# define CIRQUE_PINNACLE_SPI_LSBFIRST false +# endif +# ifndef CIRQUE_PINNACLE_SPI_MODE +# define CIRQUE_PINNACLE_SPI_MODE 1 +# endif +# ifndef CIRQUE_PINNACLE_SPI_DIVISOR +# ifdef __AVR__ +# define CIRQUE_PINNACLE_SPI_DIVISOR (F_CPU / CIRQUE_PINNACLE_CLOCK_SPEED) +# else +# define CIRQUE_PINNACLE_SPI_DIVISOR 64 +# endif +# ifndef CIRQUE_PINNACLE_SPI_CS_PIN +# error "No Chip Select pin has been defined -- missing CIRQUE_PINNACLE_SPI_CS_PIN define" +# endif +# endif +#endif diff --git a/drivers/sensors/cirque_pinnacle_i2c.c b/drivers/sensors/cirque_pinnacle_i2c.c new file mode 100644 index 0000000000..81dd982b0c --- /dev/null +++ b/drivers/sensors/cirque_pinnacle_i2c.c @@ -0,0 +1,43 @@ +// Copyright (c) 2018 Cirque Corp. Restrictions apply. See: www.cirque.com/sw-license +#include "cirque_pinnacle.h" +#include "i2c_master.h" +#include "print.h" +#include "debug.h" +#include "stdio.h" + +// Masks for Cirque Register Access Protocol (RAP) +#define WRITE_MASK 0x80 +#define READ_MASK 0xA0 + +extern bool touchpad_init; + +/* RAP Functions */ +// Reads Pinnacle registers starting at
    +void RAP_ReadBytes(uint8_t address, uint8_t* data, uint8_t count) { + uint8_t cmdByte = READ_MASK | address; // Form the READ command byte + if (touchpad_init) { + i2c_writeReg(CIRQUE_PINNACLE_ADDR << 1, cmdByte, NULL, 0, CIRQUE_PINNACLE_TIMEOUT); + if (i2c_readReg(CIRQUE_PINNACLE_ADDR << 1, cmdByte, data, count, CIRQUE_PINNACLE_TIMEOUT) != I2C_STATUS_SUCCESS) { +#ifdef CONSOLE_ENABLE + dprintf("error right touchpad\n"); +#endif + touchpad_init = false; + } + i2c_stop(); + } +} + +// Writes single-byte to
    +void RAP_Write(uint8_t address, uint8_t data) { + uint8_t cmdByte = WRITE_MASK | address; // Form the WRITE command byte + + if (touchpad_init) { + if (i2c_writeReg(CIRQUE_PINNACLE_ADDR << 1, cmdByte, &data, sizeof(data), CIRQUE_PINNACLE_TIMEOUT) != I2C_STATUS_SUCCESS) { +#ifdef CONSOLE_ENABLE + dprintf("error right touchpad\n"); +#endif + touchpad_init = false; + } + i2c_stop(); + } +} diff --git a/drivers/sensors/cirque_pinnacle_spi.c b/drivers/sensors/cirque_pinnacle_spi.c new file mode 100644 index 0000000000..f3eee88758 --- /dev/null +++ b/drivers/sensors/cirque_pinnacle_spi.c @@ -0,0 +1,52 @@ +// Copyright (c) 2018 Cirque Corp. Restrictions apply. See: www.cirque.com/sw-license +#include "cirque_pinnacle.h" +#include "spi_master.h" +#include "print.h" +#include "debug.h" + +// Masks for Cirque Register Access Protocol (RAP) +#define WRITE_MASK 0x80 +#define READ_MASK 0xA0 + +extern bool touchpad_init; + +/* RAP Functions */ +// Reads Pinnacle registers starting at
    +void RAP_ReadBytes(uint8_t address, uint8_t* data, uint8_t count) { + uint8_t cmdByte = READ_MASK | address; // Form the READ command byte + if (touchpad_init) { + if (spi_start(CIRQUE_PINNACLE_SPI_CS_PIN, CIRQUE_TRACKPAD_SPI_LSBFIRST, CIRQUE_PINNACLE_SPI_MODE, CIRQUE_PINNACLE_SPI_DIVISOR)) { + spi_write(cmdByte); + spi_read(); // filler + spi_read(); // filler + for (uint8_t i = 0; i < count; i++) { + data[i] = spi_read(); // each sepsequent read gets another register's contents + } + } else { +#ifdef CONSOLE_ENABLE + dprintf("error right touchpad\n"); +#endif + touchpad_init = false; + j + } + spi_stop(); + } +} + +// Writes single-byte to
    +void RAP_Write(uint8_t address, uint8_t data) { + uint8_t cmdByte = WRITE_MASK | address; // Form the WRITE command byte + + if (touchpad_init) { + if (spi_start(CIRQUE_PINNACLE_SPI_CS_PIN, CIRQUE_TRACKPAD_SPI_LSBFIRST, CIRQUE_PINNACLE_SPI_MODE, CIRQUE_PINNACLE_SPI_DIVISOR)) { + spi_write(cmdByte); + spi_write(data); + } else { +#ifdef CONSOLE_ENABLE + dprintf("error right touchpad\n"); +#endif + touchpad_init = false; + } + spi_stop(); + } +} diff --git a/drivers/sensors/pimoroni_trackball.c b/drivers/sensors/pimoroni_trackball.c index 48098ff0cc..7d390056ea 100644 --- a/drivers/sensors/pimoroni_trackball.c +++ b/drivers/sensors/pimoroni_trackball.c @@ -17,73 +17,55 @@ #include "pimoroni_trackball.h" #include "i2c_master.h" #include "print.h" - -#ifndef PIMORONI_TRACKBALL_ADDRESS -# define PIMORONI_TRACKBALL_ADDRESS 0x0A -#endif -#ifndef PIMORONI_TRACKBALL_INTERVAL_MS -# define PIMORONI_TRACKBALL_INTERVAL_MS 8 -#endif -#ifndef PIMORONI_TRACKBALL_MOUSE_SCALE -# define PIMORONI_TRACKBALL_MOUSE_SCALE 5 -#endif -#ifndef PIMORONI_TRACKBALL_SCROLL_SCALE -# define PIMORONI_TRACKBALL_SCROLL_SCALE 1 -#endif -#ifndef PIMORONI_TRACKBALL_DEBOUNCE_CYCLES -# define PIMORONI_TRACKBALL_DEBOUNCE_CYCLES 20 -#endif -#ifndef PIMORONI_TRACKBALL_ERROR_COUNT -# define PIMORONI_TRACKBALL_ERROR_COUNT 10 -#endif - -#define TRACKBALL_TIMEOUT 100 -#define TRACKBALL_REG_LED_RED 0x00 -#define TRACKBALL_REG_LED_GRN 0x01 -#define TRACKBALL_REG_LED_BLU 0x02 -#define TRACKBALL_REG_LED_WHT 0x03 -#define TRACKBALL_REG_LEFT 0x04 -#define TRACKBALL_REG_RIGHT 0x05 -#define TRACKBALL_REG_UP 0x06 -#define TRACKBALL_REG_DOWN 0x07 - -static pimoroni_data current_pimoroni_data; -static report_mouse_t mouse_report; -static bool scrolling = false; -static int16_t x_offset = 0; -static int16_t y_offset = 0; -static int16_t h_offset = 0; -static int16_t v_offset = 0; -static uint16_t precision = 128; -static uint8_t error_count = 0; - -float trackball_get_precision(void) { return ((float)precision / 128); } -void trackball_set_precision(float floatprecision) { precision = (floatprecision * 128); } -bool trackball_is_scrolling(void) { return scrolling; } -void trackball_set_scrolling(bool scroll) { scrolling = scroll; } - -void trackball_set_rgbw(uint8_t r, uint8_t g, uint8_t b, uint8_t w) { +#include "debug.h" +#include "timer.h" + +// clang-format off +#define PIMORONI_TRACKBALL_REG_LED_RED 0x00 +#define PIMORONI_TRACKBALL_REG_LED_GRN 0x01 +#define PIMORONI_TRACKBALL_REG_LED_BLU 0x02 +#define PIMORONI_TRACKBALL_REG_LED_WHT 0x03 +#define PIMORONI_TRACKBALL_REG_LEFT 0x04 +#define PIMORONI_TRACKBALL_REG_RIGHT 0x05 +#define PIMORONI_TRACKBALL_REG_UP 0x06 +#define PIMORONI_TRACKBALL_REG_DOWN 0x07 +// clang-format on + +static uint16_t precision = 128; + +float pimoroni_trackball_get_precision(void) { return ((float)precision / 128); } +void pimoroni_trackball_set_precision(float floatprecision) { precision = (floatprecision * 128); } + +void pimoroni_trackball_set_rgbw(uint8_t r, uint8_t g, uint8_t b, uint8_t w) { uint8_t data[4] = {r, g, b, w}; - __attribute__((unused)) i2c_status_t status = i2c_writeReg(PIMORONI_TRACKBALL_ADDRESS << 1, TRACKBALL_REG_LED_RED, data, sizeof(data), TRACKBALL_TIMEOUT); -#ifdef TRACKBALL_DEBUG - dprintf("Trackball RGBW i2c_status_t: %d\n", status); + __attribute__((unused)) i2c_status_t status = i2c_writeReg(PIMORONI_TRACKBALL_ADDRESS << 1, PIMORONI_TRACKBALL_REG_LED_RED, data, sizeof(data), PIMORONI_TRACKBALL_TIMEOUT); + +#ifdef CONSOLE_ENABLE + if (debug_mouse) dprintf("Trackball RGBW i2c_status_t: %d\n", status); #endif } -i2c_status_t read_pimoroni_trackball(pimoroni_data* data) { - i2c_status_t status = i2c_readReg(PIMORONI_TRACKBALL_ADDRESS << 1, TRACKBALL_REG_LEFT, (uint8_t*)data, sizeof(*data), TRACKBALL_TIMEOUT); -#ifdef TRACKBALL_DEBUG - dprintf("Trackball READ i2c_status_t: %d\nLeft: %d\nRight: %d\nUp: %d\nDown: %d\nSwtich: %d\n", status, data->left, data->right, data->up, data->down, data->click); +i2c_status_t read_pimoroni_trackball(pimoroni_data_t* data) { + i2c_status_t status = i2c_readReg(PIMORONI_TRACKBALL_ADDRESS << 1, PIMORONI_TRACKBALL_REG_LEFT, (uint8_t*)data, sizeof(*data), PIMORONI_TRACKBALL_TIMEOUT); +#ifdef CONSOLE_ENABLE + if (debug_mouse) { + static uint16_t d_timer; + if (timer_elapsed(d_timer) > PIMORONI_TRACKBALL_DEBUG_INTERVAL) { + dprintf("Trackball READ i2c_status_t: %d L: %d R: %d Up: %d D: %d SW: %d\n", status, data->left, data->right, data->up, data->down, data->click); + d_timer = timer_read(); + } + } #endif + return status; } -__attribute__((weak)) void pointing_device_init(void) { +__attribute__((weak)) void pimironi_trackball_device_init(void) { i2c_init(); - trackball_set_rgbw(0x00, 0x00, 0x00, 0x00); + pimoroni_trackball_set_rgbw(0x00, 0x00, 0x00, 0x00); } -int16_t trackball_get_offsets(uint8_t negative_dir, uint8_t positive_dir, uint8_t scale) { +int16_t pimoroni_trackball_get_offsets(uint8_t negative_dir, uint8_t positive_dir, uint8_t scale) { uint8_t offset = 0; bool isnegative = false; if (negative_dir > positive_dir) { @@ -96,7 +78,7 @@ int16_t trackball_get_offsets(uint8_t negative_dir, uint8_t positive_dir, uint8_ return isnegative ? -(int16_t)(magnitude) : (int16_t)(magnitude); } -void trackball_adapt_values(int8_t* mouse, int16_t* offset) { +void pimoroni_trackball_adapt_values(int8_t* mouse, int16_t* offset) { if (*offset > 127) { *mouse = 127; *offset -= 127; @@ -108,94 +90,3 @@ void trackball_adapt_values(int8_t* mouse, int16_t* offset) { *offset = 0; } } - -__attribute__((weak)) void trackball_click(bool pressed, report_mouse_t* mouse) { -#ifdef PIMORONI_TRACKBALL_CLICK - if (pressed) { - mouse->buttons |= MOUSE_BTN1; - } else { - mouse->buttons &= ~MOUSE_BTN1; - } -#endif -} - -__attribute__((weak)) bool pointing_device_task_user(pimoroni_data* trackball_data) { return true; }; - -__attribute__((weak)) void pointing_device_task() { - static fast_timer_t throttle = 0; - static uint16_t debounce = 0; - - if (error_count < PIMORONI_TRACKBALL_ERROR_COUNT && timer_elapsed_fast(throttle) >= PIMORONI_TRACKBALL_INTERVAL_MS) { - i2c_status_t status = read_pimoroni_trackball(¤t_pimoroni_data); - - if (status == I2C_STATUS_SUCCESS) { - error_count = 0; - - if (pointing_device_task_user(¤t_pimoroni_data)) { - mouse_report = pointing_device_get_report(); - - if (!(current_pimoroni_data.click & 128)) { - trackball_click(false, &mouse_report); - if (!debounce) { - if (scrolling) { -#ifdef PIMORONI_TRACKBALL_INVERT_X - h_offset += trackball_get_offsets(current_pimoroni_data.right, current_pimoroni_data.left, PIMORONI_TRACKBALL_SCROLL_SCALE); -#else - h_offset -= trackball_get_offsets(current_pimoroni_data.right, current_pimoroni_data.left, PIMORONI_TRACKBALL_SCROLL_SCALE); -#endif -#ifdef PIMORONI_TRACKBALL_INVERT_Y - v_offset += trackball_get_offsets(current_pimoroni_data.down, current_pimoroni_data.up, PIMORONI_TRACKBALL_SCROLL_SCALE); -#else - v_offset -= trackball_get_offsets(current_pimoroni_data.down, current_pimoroni_data.up, PIMORONI_TRACKBALL_SCROLL_SCALE); -#endif - } else { -#ifdef PIMORONI_TRACKBALL_INVERT_X - x_offset -= trackball_get_offsets(current_pimoroni_data.right, current_pimoroni_data.left, PIMORONI_TRACKBALL_MOUSE_SCALE); -#else - x_offset += trackball_get_offsets(current_pimoroni_data.right, current_pimoroni_data.left, PIMORONI_TRACKBALL_MOUSE_SCALE); -#endif -#ifdef PIMORONI_TRACKBALL_INVERT_Y - y_offset -= trackball_get_offsets(current_pimoroni_data.down, current_pimoroni_data.up, PIMORONI_TRACKBALL_MOUSE_SCALE); -#else - y_offset += trackball_get_offsets(current_pimoroni_data.down, current_pimoroni_data.up, PIMORONI_TRACKBALL_MOUSE_SCALE); -#endif - } - if (scrolling) { -#ifndef PIMORONI_TRACKBALL_ROTATE - trackball_adapt_values(&mouse_report.h, &h_offset); - trackball_adapt_values(&mouse_report.v, &v_offset); -#else - trackball_adapt_values(&mouse_report.h, &v_offset); - trackball_adapt_values(&mouse_report.v, &h_offset); -#endif - mouse_report.x = 0; - mouse_report.y = 0; - } else { -#ifndef PIMORONI_TRACKBALL_ROTATE - trackball_adapt_values(&mouse_report.x, &x_offset); - trackball_adapt_values(&mouse_report.y, &y_offset); -#else - trackball_adapt_values(&mouse_report.x, &y_offset); - trackball_adapt_values(&mouse_report.y, &x_offset); -#endif - mouse_report.h = 0; - mouse_report.v = 0; - } - } else { - debounce--; - } - } else { - trackball_click(true, &mouse_report); - debounce = PIMORONI_TRACKBALL_DEBOUNCE_CYCLES; - } - } - } else { - error_count++; - } - - pointing_device_set_report(mouse_report); - pointing_device_send(); - - throttle = timer_read_fast(); - } -} diff --git a/drivers/sensors/pimoroni_trackball.h b/drivers/sensors/pimoroni_trackball.h index 6b2a41425d..59ee8724ba 100644 --- a/drivers/sensors/pimoroni_trackball.h +++ b/drivers/sensors/pimoroni_trackball.h @@ -16,22 +16,46 @@ */ #pragma once -#include "quantum.h" -#include "pointing_device.h" +#include +#include "report.h" +#include "i2c_master.h" -typedef struct pimoroni_data { +#ifndef PIMORONI_TRACKBALL_ADDRESS +# define PIMORONI_TRACKBALL_ADDRESS 0x0A +#endif +#ifndef PIMORONI_TRACKBALL_INTERVAL_MS +# define PIMORONI_TRACKBALL_INTERVAL_MS 8 +#endif +#ifndef PIMORONI_TRACKBALL_SCALE +# define PIMORONI_TRACKBALL_SCALE 5 +#endif +#ifndef PIMORONI_TRACKBALL_DEBOUNCE_CYCLES +# define PIMORONI_TRACKBALL_DEBOUNCE_CYCLES 20 +#endif +#ifndef PIMORONI_TRACKBALL_ERROR_COUNT +# define PIMORONI_TRACKBALL_ERROR_COUNT 10 +#endif + +#ifndef PIMORONI_TRACKBALL_TIMEOUT +# define PIMORONI_TRACKBALL_TIMEOUT 100 +#endif + +#ifndef PIMORONI_TRACKBALL_DEBUG_INTERVAL +# define PIMORONI_TRACKBALL_DEBUG_INTERVAL 100 +#endif + +typedef struct { uint8_t left; uint8_t right; uint8_t up; uint8_t down; uint8_t click; -} pimoroni_data; +} pimoroni_data_t; -void trackball_set_rgbw(uint8_t red, uint8_t green, uint8_t blue, uint8_t white); -void trackball_click(bool pressed, report_mouse_t* mouse); -int16_t trackball_get_offsets(uint8_t negative_dir, uint8_t positive_dir, uint8_t scale); -void trackball_adapt_values(int8_t* mouse, int16_t* offset); -float trackball_get_precision(void); -void trackball_set_precision(float precision); -bool trackball_is_scrolling(void); -void trackball_set_scrolling(bool scroll); +void pimironi_trackball_device_init(void); +void pimoroni_trackball_set_rgbw(uint8_t red, uint8_t green, uint8_t blue, uint8_t white); +int16_t pimoroni_trackball_get_offsets(uint8_t negative_dir, uint8_t positive_dir, uint8_t scale); +void pimoroni_trackball_adapt_values(int8_t* mouse, int16_t* offset); +float pimoroni_trackball_get_precision(void); +void pimoroni_trackball_set_precision(float precision); +i2c_status_t read_pimoroni_trackball(pimoroni_data_t* data); diff --git a/drivers/sensors/pmw3360.c b/drivers/sensors/pmw3360.c index 79b653e452..2b27dccbb6 100644 --- a/drivers/sensors/pmw3360.c +++ b/drivers/sensors/pmw3360.c @@ -20,62 +20,71 @@ #include "wait.h" #include "debug.h" #include "print.h" -#include "pmw3360_firmware.h" +#include PMW3360_FIRMWARE_H // Registers -#define REG_Product_ID 0x00 -#define REG_Revision_ID 0x01 -#define REG_Motion 0x02 -#define REG_Delta_X_L 0x03 -#define REG_Delta_X_H 0x04 -#define REG_Delta_Y_L 0x05 -#define REG_Delta_Y_H 0x06 -#define REG_SQUAL 0x07 -#define REG_Raw_Data_Sum 0x08 -#define REG_Maximum_Raw_data 0x09 -#define REG_Minimum_Raw_data 0x0A -#define REG_Shutter_Lower 0x0B -#define REG_Shutter_Upper 0x0C -#define REG_Control 0x0D -#define REG_Config1 0x0F -#define REG_Config2 0x10 -#define REG_Angle_Tune 0x11 -#define REG_Frame_Capture 0x12 -#define REG_SROM_Enable 0x13 -#define REG_Run_Downshift 0x14 -#define REG_Rest1_Rate_Lower 0x15 -#define REG_Rest1_Rate_Upper 0x16 -#define REG_Rest1_Downshift 0x17 -#define REG_Rest2_Rate_Lower 0x18 -#define REG_Rest2_Rate_Upper 0x19 -#define REG_Rest2_Downshift 0x1A -#define REG_Rest3_Rate_Lower 0x1B -#define REG_Rest3_Rate_Upper 0x1C -#define REG_Observation 0x24 -#define REG_Data_Out_Lower 0x25 -#define REG_Data_Out_Upper 0x26 -#define REG_Raw_Data_Dump 0x29 -#define REG_SROM_ID 0x2A -#define REG_Min_SQ_Run 0x2B -#define REG_Raw_Data_Threshold 0x2C -#define REG_Config5 0x2F -#define REG_Power_Up_Reset 0x3A -#define REG_Shutdown 0x3B -#define REG_Inverse_Product_ID 0x3F -#define REG_LiftCutoff_Tune3 0x41 -#define REG_Angle_Snap 0x42 -#define REG_LiftCutoff_Tune1 0x4A -#define REG_Motion_Burst 0x50 -#define REG_LiftCutoff_Tune_Timeout 0x58 +// clang-format off +#define REG_Product_ID 0x00 +#define REG_Revision_ID 0x01 +#define REG_Motion 0x02 +#define REG_Delta_X_L 0x03 +#define REG_Delta_X_H 0x04 +#define REG_Delta_Y_L 0x05 +#define REG_Delta_Y_H 0x06 +#define REG_SQUAL 0x07 +#define REG_Raw_Data_Sum 0x08 +#define REG_Maximum_Raw_data 0x09 +#define REG_Minimum_Raw_data 0x0A +#define REG_Shutter_Lower 0x0B +#define REG_Shutter_Upper 0x0C +#define REG_Control 0x0D +#define REG_Config1 0x0F +#define REG_Config2 0x10 +#define REG_Angle_Tune 0x11 +#define REG_Frame_Capture 0x12 +#define REG_SROM_Enable 0x13 +#define REG_Run_Downshift 0x14 +#define REG_Rest1_Rate_Lower 0x15 +#define REG_Rest1_Rate_Upper 0x16 +#define REG_Rest1_Downshift 0x17 +#define REG_Rest2_Rate_Lower 0x18 +#define REG_Rest2_Rate_Upper 0x19 +#define REG_Rest2_Downshift 0x1A +#define REG_Rest3_Rate_Lower 0x1B +#define REG_Rest3_Rate_Upper 0x1C +#define REG_Observation 0x24 +#define REG_Data_Out_Lower 0x25 +#define REG_Data_Out_Upper 0x26 +#define REG_Raw_Data_Dump 0x29 +#define REG_SROM_ID 0x2A +#define REG_Min_SQ_Run 0x2B +#define REG_Raw_Data_Threshold 0x2C +#define REG_Config5 0x2F +#define REG_Power_Up_Reset 0x3A +#define REG_Shutdown 0x3B +#define REG_Inverse_Product_ID 0x3F +#define REG_LiftCutoff_Tune3 0x41 +#define REG_Angle_Snap 0x42 +#define REG_LiftCutoff_Tune1 0x4A +#define REG_Motion_Burst 0x50 +#define REG_LiftCutoff_Tune_Timeout 0x58 #define REG_LiftCutoff_Tune_Min_Length 0x5A -#define REG_SROM_Load_Burst 0x62 -#define REG_Lift_Config 0x63 -#define REG_Raw_Data_Burst 0x64 -#define REG_LiftCutoff_Tune2 0x65 +#define REG_SROM_Load_Burst 0x62 +#define REG_Lift_Config 0x63 +#define REG_Raw_Data_Burst 0x64 +#define REG_LiftCutoff_Tune2 0x65 +// clang-format on + +#ifndef MAX_CPI +# define MAX_CPI 0x77 // limits to 0--119, should be max cpi/100 +#endif bool _inBurst = false; +#ifdef CONSOLE_ENABLE void print_byte(uint8_t byte) { dprintf("%c%c%c%c%c%c%c%c|", (byte & 0x80 ? '1' : '0'), (byte & 0x40 ? '1' : '0'), (byte & 0x20 ? '1' : '0'), (byte & 0x10 ? '1' : '0'), (byte & 0x08 ? '1' : '0'), (byte & 0x04 ? '1' : '0'), (byte & 0x02 ? '1' : '0'), (byte & 0x01 ? '1' : '0')); } +#endif +#define constrain(amt, low, high) ((amt) < (low) ? (low) : ((amt) > (high) ? (high) : (amt))) bool spi_start_adv(void) { bool status = spi_start(PMW3360_CS_PIN, PMW3360_SPI_LSBFIRST, PMW3360_SPI_MODE, PMW3360_SPI_DIVISOR); @@ -124,20 +133,20 @@ uint8_t spi_read_adv(uint8_t reg_addr) { return data; } -void pmw_set_cpi(uint16_t cpi) { - uint8_t cpival = constrain((cpi / 100) - 1, 0, 0x77); // limits to 0--119 +void pmw3360_set_cpi(uint16_t cpi) { + uint8_t cpival = constrain((cpi / 100) - 1, 0, MAX_CPI); spi_start_adv(); spi_write_adv(REG_Config1, cpival); spi_stop(); } -uint16_t pmw_get_cpi(void) { +uint16_t pmw3360_get_cpi(void) { uint8_t cpival = spi_read_adv(REG_Config1); return (uint16_t)(cpival & 0xFF) * 100; } -bool pmw_spi_init(void) { +bool pmw3360_init(void) { setPinOutput(PMW3360_CS_PIN); spi_init(); @@ -164,12 +173,12 @@ bool pmw_spi_init(void) { spi_read_adv(REG_Delta_Y_L); spi_read_adv(REG_Delta_Y_H); - pmw_upload_firmware(); + pmw3360_upload_firmware(); spi_stop_adv(); wait_ms(10); - pmw_set_cpi(PMW3360_CPI); + pmw3360_set_cpi(PMW3360_CPI); wait_ms(1); @@ -177,14 +186,14 @@ bool pmw_spi_init(void) { spi_write_adv(REG_Angle_Tune, constrain(ROTATIONAL_TRANSFORM_ANGLE, -30, 30)); - bool init_success = pmw_check_signature(); + bool init_success = pmw3360_check_signature(); writePinLow(PMW3360_CS_PIN); return init_success; } -void pmw_upload_firmware(void) { +void pmw3360_upload_firmware(void) { spi_write_adv(REG_SROM_Enable, 0x1d); wait_ms(10); @@ -211,16 +220,18 @@ void pmw_upload_firmware(void) { wait_ms(10); } -bool pmw_check_signature(void) { +bool pmw3360_check_signature(void) { uint8_t pid = spi_read_adv(REG_Product_ID); uint8_t iv_pid = spi_read_adv(REG_Inverse_Product_ID); uint8_t SROM_ver = spi_read_adv(REG_SROM_ID); - return (pid == 0x42 && iv_pid == 0xBD && SROM_ver == 0x04); // signature for SROM 0x04 + return (pid == firmware_signature[0] && iv_pid == firmware_signature[1] && SROM_ver == firmware_signature[2]); // signature for SROM 0x04 } -report_pmw_t pmw_read_burst(void) { +report_pmw3360_t pmw3360_read_burst(void) { if (!_inBurst) { +#ifdef CONSOLE_ENABLE dprintf("burst on"); +#endif spi_write_adv(REG_Motion_Burst, 0x00); _inBurst = true; } @@ -229,12 +240,7 @@ report_pmw_t pmw_read_burst(void) { spi_write(REG_Motion_Burst); wait_us(35); // waits for tSRAD - report_pmw_t data; - data.motion = 0; - data.dx = 0; - data.mdx = 0; - data.dy = 0; - data.mdx = 0; + report_pmw3360_t data = {0}; data.motion = spi_read(); spi_write(0x00); // skip Observation @@ -245,6 +251,7 @@ report_pmw_t pmw_read_burst(void) { spi_stop(); +#ifdef CONSOLE_ENABLE if (debug_mouse) { print_byte(data.motion); print_byte(data.dx); @@ -253,6 +260,7 @@ report_pmw_t pmw_read_burst(void) { print_byte(data.mdy); dprintf("\n"); } +#endif data.isMotion = (data.motion & 0x80) != 0; data.isOnSurface = (data.motion & 0x08) == 0; diff --git a/drivers/sensors/pmw3360.h b/drivers/sensors/pmw3360.h index 7429a6ba09..7b2bef5b80 100644 --- a/drivers/sensors/pmw3360.h +++ b/drivers/sensors/pmw3360.h @@ -18,6 +18,8 @@ #pragma once +#include +#include "report.h" #include "spi_master.h" #ifndef PMW3360_CPI @@ -25,7 +27,7 @@ #endif #ifndef PMW3360_CLOCK_SPEED -# define PMW3360_CLOCK_SPEED 70000000 +# define PMW3360_CLOCK_SPEED 2000000 #endif #ifndef PMW3360_SPI_LSBFIRST @@ -52,6 +54,17 @@ # error "No chip select pin defined -- missing PMW3360_CS_PIN" #endif +/* +The pmw33660 and pmw3389 use the same registers and timing and such. +The only differences between the two is the firmware used, and the +range for the DPI. So add a semi-secret hack to allow use of the +pmw3389's firmware blob. Also, can set the max cpi range too. +This should work for the 3390 and 3391 too, in theory. +*/ +#ifndef PMW3360_FIRMWARE_H +# define PMW3360_FIRMWARE_H "pmw3360_firmware.h" +#endif + #ifdef CONSOLE_ENABLE void print_byte(uint8_t byte); #endif @@ -64,19 +77,18 @@ typedef struct { int8_t mdx; int16_t dy; // displacement on y directions. int8_t mdy; -} report_pmw_t; +} report_pmw3360_t; -bool spi_start_adv(void); -void spi_stop_adv(void); -spi_status_t spi_write_adv(uint8_t reg_addr, uint8_t data); -uint8_t spi_read_adv(uint8_t reg_addr); -bool pmw_spi_init(void); -void pmw_set_cpi(uint16_t cpi); -uint16_t pmw_get_cpi(void); -void pmw_upload_firmware(void); -bool pmw_check_signature(void); -report_pmw_t pmw_read_burst(void); +bool spi_start_adv(void); +void spi_stop_adv(void); +spi_status_t spi_write_adv(uint8_t reg_addr, uint8_t data); +uint8_t spi_read_adv(uint8_t reg_addr); +bool pmw3360_init(void); +void pmw3360_set_cpi(uint16_t cpi); +uint16_t pmw3360_get_cpi(void); +void pmw3360_upload_firmware(void); +bool pmw3360_check_signature(void); +report_pmw3360_t pmw3360_read_burst(void); #define degToRad(angleInDegrees) ((angleInDegrees)*M_PI / 180.0) #define radToDeg(angleInRadians) ((angleInRadians)*180.0 / M_PI) -#define constrain(amt, low, high) ((amt) < (low) ? (low) : ((amt) > (high) ? (high) : (amt))) diff --git a/drivers/sensors/pmw3360_firmware.h b/drivers/sensors/pmw3360_firmware.h index 4d5fe7a0b9..ed9fda5a75 100644 --- a/drivers/sensors/pmw3360_firmware.h +++ b/drivers/sensors/pmw3360_firmware.h @@ -20,8 +20,13 @@ #include "progmem.h" +// PID, Inverse PID, SROM version +const uint8_t firmware_signature[] PROGMEM = {0x42, 0xBD, 0x04}; + #define FIRMWARE_LENGTH 4094 +// Firmware Blob foor PMW3360 + // clang-format off const uint8_t firmware_data[FIRMWARE_LENGTH] PROGMEM = { 0x01, 0x04, 0x8E, 0x96, 0x6E, 0x77, 0x3E, 0xFE, 0x7E, 0x5F, 0x1D, 0xB8, 0xF2, 0x66, 0x4E, 0xFF, diff --git a/drivers/sensors/pmw3389_firmware.h b/drivers/sensors/pmw3389_firmware.h new file mode 100644 index 0000000000..0564dab73a --- /dev/null +++ b/drivers/sensors/pmw3389_firmware.h @@ -0,0 +1,303 @@ +/* Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) + * Copyright 2019 Sunjun Kim + * Copyright 2020 Ploopy Corporation + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +// PID, Inverse PID, SROM version +const uint8_t firmware_signature[] PROGMEM = {0x42, 0xBD, 0x04}; + +// clang-format off +// Firmware Blob foor PMW3389 +const uint16_t firmware_length = 4094; +// clang-format off +const uint8_t firmware_data[] PROGMEM = { // SROM 0x04 +0x01, 0xe8, 0xba, 0x26, 0x0b, 0xb2, 0xbe, 0xfe, 0x7e, 0x5f, 0x3c, 0xdb, 0x15, 0xa8, 0xb3, +0xe4, 0x2b, 0xb5, 0xe8, 0x53, 0x07, 0x6d, 0x3b, 0xd1, 0x20, 0xc2, 0x06, 0x6f, 0x3d, 0xd9, +0x11, 0xa0, 0xc2, 0xe7, 0x2d, 0xb9, 0xd1, 0x20, 0xa3, 0xa5, 0xc8, 0xf3, 0x64, 0x4a, 0xf7, +0x4d, 0x18, 0x93, 0xa4, 0xca, 0xf7, 0x6c, 0x5a, 0x36, 0xee, 0x5e, 0x3e, 0xfe, 0x7e, 0x7e, +0x5f, 0x1d, 0x99, 0xb0, 0xc3, 0xe5, 0x29, 0xd3, 0x03, 0x65, 0x48, 0x12, 0x87, 0x6d, 0x58, +0x32, 0xe6, 0x2f, 0xdc, 0x3a, 0xf2, 0x4f, 0xfd, 0x59, 0x11, 0x81, 0x61, 0x21, 0xc0, 0x02, +0x86, 0x8e, 0x7f, 0x5d, 0x38, 0xf2, 0x47, 0x0c, 0x7b, 0x55, 0x28, 0xb3, 0xe4, 0x4a, 0x16, +0xab, 0xbf, 0xdd, 0x38, 0xf2, 0x66, 0x4e, 0xff, 0x5d, 0x19, 0x91, 0xa0, 0xa3, 0xa5, 0xc8, +0x12, 0xa6, 0xaf, 0xdc, 0x3a, 0xd1, 0x41, 0x60, 0x75, 0x58, 0x24, 0x92, 0xd4, 0x72, 0x6c, +0xe0, 0x2f, 0xfd, 0x23, 0x8d, 0x1c, 0x5b, 0xb2, 0x97, 0x36, 0x3d, 0x0b, 0xa2, 0x49, 0xb1, +0x58, 0xf2, 0x1f, 0xc0, 0xcb, 0xf8, 0x41, 0x4f, 0xcd, 0x1e, 0x6b, 0x39, 0xa7, 0x2b, 0xe9, +0x30, 0x16, 0x83, 0xd2, 0x0e, 0x47, 0x8f, 0xe3, 0xb1, 0xdf, 0xa2, 0x15, 0xdb, 0x5d, 0x30, +0xc5, 0x1a, 0xab, 0x31, 0x99, 0xf3, 0xfa, 0xb2, 0x86, 0x69, 0xad, 0x7a, 0xe8, 0xa7, 0x18, +0x6a, 0xcc, 0xc8, 0x65, 0x23, 0x87, 0xa8, 0x5f, 0xf5, 0x21, 0x59, 0x75, 0x09, 0x71, 0x45, +0x55, 0x25, 0x4b, 0xda, 0xa1, 0xc3, 0xf7, 0x41, 0xab, 0x59, 0xd9, 0x74, 0x12, 0x55, 0x5f, +0xbc, 0xaf, 0xd9, 0xfd, 0xb0, 0x1e, 0xa3, 0x0f, 0xff, 0xde, 0x11, 0x16, 0x6a, 0xae, 0x0e, +0xe1, 0x5d, 0x3c, 0x10, 0x43, 0x9a, 0xa1, 0x0b, 0x24, 0x8f, 0x0d, 0x7f, 0x0b, 0x5e, 0x4c, +0x42, 0xa4, 0x84, 0x2c, 0x40, 0xd0, 0x55, 0x39, 0xe6, 0x4b, 0xf8, 0x9b, 0x2f, 0xdc, 0x28, +0xff, 0xfa, 0xb5, 0x85, 0x19, 0xe5, 0x28, 0xa1, 0x77, 0xaa, 0x73, 0xf3, 0x03, 0xc7, 0x62, +0xa6, 0x91, 0x18, 0xc9, 0xb0, 0xcd, 0x05, 0xdc, 0xca, 0x81, 0x26, 0x1a, 0x47, 0x40, 0xda, +0x36, 0x7d, 0x6a, 0x53, 0xc8, 0x5a, 0x77, 0x5d, 0x19, 0xa4, 0x1b, 0x23, 0x83, 0xd0, 0xb2, +0xaa, 0x0e, 0xbf, 0x77, 0x4e, 0x3a, 0x3b, 0x59, 0x00, 0x31, 0x0d, 0x02, 0x1b, 0x88, 0x7a, +0xd4, 0xbd, 0x9d, 0xcc, 0x58, 0x04, 0x69, 0xf6, 0x3b, 0xca, 0x42, 0xe2, 0xfd, 0xc3, 0x3d, +0x39, 0xc5, 0xd0, 0x71, 0xe4, 0xc8, 0xb7, 0x3e, 0x3f, 0xc8, 0xe9, 0xca, 0xc9, 0x3f, 0x04, +0x4e, 0x1b, 0x79, 0xca, 0xa5, 0x61, 0xc2, 0xed, 0x1d, 0xa6, 0xda, 0x5a, 0xe9, 0x7f, 0x65, +0x8c, 0xbe, 0x12, 0x6e, 0xa4, 0x5b, 0x33, 0x2f, 0x84, 0x28, 0x9c, 0x1c, 0x88, 0x2d, 0xff, +0x07, 0xbf, 0xa6, 0xd7, 0x5a, 0x88, 0x86, 0xb0, 0x3f, 0xf6, 0x31, 0x5b, 0x11, 0x6d, 0xf5, +0x58, 0xeb, 0x58, 0x02, 0x9e, 0xb5, 0x9a, 0xb1, 0xff, 0x25, 0x9d, 0x8b, 0x4f, 0xb6, 0x0a, +0xf9, 0xea, 0x3e, 0x3f, 0x21, 0x09, 0x65, 0x21, 0x22, 0xfe, 0x3d, 0x4e, 0x11, 0x5b, 0x9e, +0x5a, 0x59, 0x8b, 0xdd, 0xd8, 0xce, 0xd6, 0xd9, 0x59, 0xd2, 0x1e, 0xfd, 0xef, 0x0d, 0x1b, +0xd9, 0x61, 0x7f, 0xd7, 0x2d, 0xad, 0x62, 0x09, 0xe5, 0x22, 0x63, 0xea, 0xc7, 0x31, 0xd9, +0xa1, 0x38, 0x80, 0x5c, 0xa7, 0x32, 0x82, 0xec, 0x1b, 0xa2, 0x49, 0x5a, 0x06, 0xd2, 0x7c, +0xc9, 0x96, 0x57, 0xbb, 0x17, 0x75, 0xfc, 0x7a, 0x8f, 0x0d, 0x77, 0xb5, 0x7a, 0x8e, 0x3e, +0xf4, 0xba, 0x2f, 0x69, 0x13, 0x26, 0xd6, 0xd9, 0x21, 0x60, 0x2f, 0x21, 0x3e, 0x87, 0xee, +0xfd, 0x87, 0x16, 0x0d, 0xc8, 0x08, 0x00, 0x25, 0x71, 0xac, 0x2c, 0x03, 0x2a, 0x37, 0x2d, +0xb3, 0x34, 0x09, 0x91, 0xe3, 0x06, 0x2c, 0x38, 0x37, 0x95, 0x3b, 0x17, 0x7a, 0xaf, 0xac, +0x99, 0x55, 0xab, 0x41, 0x39, 0x5f, 0x8e, 0xa6, 0x43, 0x80, 0x03, 0x88, 0x6f, 0x7d, 0xbd, +0x5a, 0xb4, 0x2b, 0x32, 0x23, 0x5a, 0xa9, 0x31, 0x32, 0x39, 0x4c, 0x5b, 0xf4, 0x6b, 0xaf, +0x66, 0x6f, 0x3c, 0x8e, 0x2d, 0x82, 0x97, 0x9f, 0x4a, 0x01, 0xdc, 0x99, 0x98, 0x00, 0xec, +0x38, 0x7a, 0x79, 0x70, 0xa6, 0x85, 0xd6, 0x21, 0x63, 0x0d, 0x45, 0x9a, 0x2e, 0x5e, 0xa7, +0xb1, 0xea, 0x66, 0x6a, 0xbc, 0x62, 0x2d, 0x7b, 0x7d, 0x85, 0xea, 0x95, 0x2f, 0xc0, 0xe8, +0x6f, 0x35, 0xa0, 0x3a, 0x02, 0x25, 0xbc, 0xb2, 0x5f, 0x5c, 0x43, 0x96, 0xcc, 0x26, 0xd2, +0x16, 0xb4, 0x96, 0x73, 0xd7, 0x13, 0xc7, 0xae, 0x53, 0x15, 0x31, 0x89, 0x68, 0x66, 0x6d, +0x2c, 0x92, 0x1f, 0xcc, 0x5b, 0xa7, 0x8f, 0x5d, 0xbb, 0xc9, 0xdb, 0xe8, 0x3b, 0x9d, 0x61, +0x74, 0x8b, 0x05, 0xa1, 0x58, 0x52, 0x68, 0xee, 0x3d, 0x39, 0x79, 0xa0, 0x9b, 0xdd, 0xe1, +0x55, 0xc9, 0x60, 0xeb, 0xad, 0xb8, 0x5b, 0xc2, 0x5a, 0xb5, 0x2c, 0x18, 0x55, 0xa9, 0x50, +0xc3, 0xf6, 0x72, 0x5f, 0xcc, 0xe2, 0xf4, 0x55, 0xb5, 0xd6, 0xb5, 0x4a, 0x99, 0xa5, 0x28, +0x74, 0x97, 0x18, 0xe8, 0xc0, 0x84, 0x89, 0x50, 0x03, 0x86, 0x4d, 0x1a, 0xb7, 0x09, 0x90, +0xa2, 0x01, 0x04, 0xbb, 0x73, 0x62, 0xcb, 0x97, 0x22, 0x70, 0x5d, 0x52, 0x41, 0x8e, 0xd9, +0x90, 0x15, 0xaa, 0xab, 0x0a, 0x31, 0x65, 0xb4, 0xda, 0xd0, 0xee, 0x24, 0xc9, 0x41, 0x91, +0x1e, 0xbc, 0x46, 0x70, 0x40, 0x9d, 0xda, 0x0e, 0x2a, 0xe4, 0xb2, 0x4c, 0x9f, 0xf2, 0xfc, +0xf3, 0x84, 0x17, 0x44, 0x1e, 0xd7, 0xca, 0x23, 0x1f, 0x3f, 0x5a, 0x22, 0x3d, 0xaf, 0x9b, +0x2d, 0xfc, 0x41, 0xad, 0x26, 0xb4, 0x45, 0x67, 0x0b, 0x80, 0x0e, 0xf9, 0x61, 0x37, 0xec, +0x3b, 0xf4, 0x4b, 0x14, 0xdf, 0x5a, 0x0c, 0x3a, 0x50, 0x0b, 0x14, 0x0c, 0x72, 0xae, 0xc6, +0xc5, 0xec, 0x35, 0x53, 0x2d, 0x59, 0xed, 0x91, 0x74, 0xe2, 0xc4, 0xc8, 0xf2, 0x25, 0x6b, +0x97, 0x6f, 0xc9, 0x76, 0xce, 0xa9, 0xb1, 0x99, 0x8f, 0x5a, 0x92, 0x3b, 0xc4, 0x8d, 0x54, +0x50, 0x40, 0x72, 0xd6, 0x90, 0x83, 0xfc, 0xe5, 0x49, 0x8b, 0x17, 0xf5, 0xfd, 0x6b, 0x8d, +0x32, 0x02, 0xe9, 0x0a, 0xfe, 0xbf, 0x00, 0x6b, 0xa3, 0xad, 0x5f, 0x09, 0x4b, 0x97, 0x2b, +0x00, 0x58, 0x65, 0x2e, 0x07, 0x49, 0x0a, 0x3b, 0x6b, 0x2e, 0x50, 0x6c, 0x1d, 0xac, 0xb7, +0x6a, 0x26, 0xd8, 0x13, 0xa4, 0xca, 0x16, 0xae, 0xab, 0x93, 0xb9, 0x1c, 0x1c, 0xb4, 0x47, +0x6a, 0x38, 0x36, 0x17, 0x27, 0xc9, 0x7f, 0xc7, 0x64, 0xcb, 0x89, 0x58, 0xc5, 0x61, 0xc2, +0xc6, 0xea, 0x15, 0x0b, 0x34, 0x0c, 0x5d, 0x61, 0x76, 0x6e, 0x2b, 0x62, 0x40, 0x92, 0xa3, +0x6c, 0xef, 0xf4, 0xe4, 0xc3, 0xa1, 0xa8, 0xf5, 0x94, 0x79, 0x0d, 0xd1, 0x3d, 0xcb, 0x3d, +0x40, 0xb6, 0xd0, 0xf0, 0x10, 0x54, 0xd8, 0x47, 0x25, 0x51, 0xc5, 0x41, 0x79, 0x00, 0xe5, +0xa0, 0x72, 0xde, 0xbb, 0x3b, 0x62, 0x17, 0xf6, 0xbc, 0x5d, 0x00, 0x76, 0x2e, 0xa7, 0x3b, +0xb6, 0xf1, 0x98, 0x72, 0x59, 0x2a, 0x73, 0xb0, 0x21, 0xd6, 0x49, 0xe0, 0xc0, 0xd5, 0xeb, +0x02, 0x7d, 0x4b, 0x41, 0x28, 0x70, 0x2d, 0xec, 0x2b, 0x71, 0x1f, 0x0b, 0xb9, 0x71, 0x63, +0x06, 0xe6, 0xbc, 0x60, 0xbb, 0xf4, 0x9a, 0x62, 0x43, 0x09, 0x18, 0x4e, 0x93, 0x06, 0x4d, +0x76, 0xfa, 0x7f, 0xbd, 0x02, 0xe4, 0x50, 0x91, 0x12, 0xe5, 0x86, 0xff, 0x64, 0x1e, 0xaf, +0x7e, 0xb3, 0xb2, 0xde, 0x89, 0xc1, 0xa2, 0x6f, 0x40, 0x7b, 0x41, 0x51, 0x63, 0xea, 0x25, +0xd1, 0x97, 0x57, 0x92, 0xa8, 0x45, 0xa1, 0xa5, 0x45, 0x21, 0x43, 0x7f, 0x83, 0x15, 0x29, +0xd0, 0x30, 0x53, 0x32, 0xb4, 0x5a, 0x17, 0x96, 0xbc, 0xc2, 0x68, 0xa9, 0xb7, 0xaf, 0xac, +0xdf, 0xf1, 0xe3, 0x89, 0xba, 0x24, 0x79, 0x54, 0xc6, 0x14, 0x07, 0x1c, 0x1e, 0x0d, 0x3a, +0x6b, 0xe5, 0x3d, 0x4e, 0x10, 0x60, 0x96, 0xec, 0x6c, 0xda, 0x47, 0xae, 0x03, 0x25, 0x39, +0x1d, 0x74, 0xc8, 0xac, 0x6a, 0xf2, 0x6b, 0x05, 0x2a, 0x9a, 0xe7, 0xe8, 0x92, 0xd6, 0xc2, +0x6d, 0xfa, 0xe8, 0xa7, 0x9d, 0x5f, 0x48, 0xc9, 0x75, 0xf1, 0x66, 0x6a, 0xdb, 0x5d, 0x9a, +0xcd, 0x27, 0xdd, 0xb9, 0x24, 0x04, 0x9c, 0x18, 0xc2, 0x6d, 0x0c, 0x91, 0x34, 0x48, 0x42, +0x6f, 0xe9, 0x59, 0x70, 0xc4, 0x7e, 0x81, 0x0e, 0x32, 0x0a, 0x93, 0x48, 0xb0, 0xc0, 0x15, +0x9e, 0x05, 0xac, 0x36, 0x16, 0xcb, 0x59, 0x65, 0xa0, 0x83, 0xdf, 0x3e, 0xda, 0xfb, 0x1d, +0x1a, 0xdb, 0x65, 0xec, 0x9a, 0xc6, 0xc3, 0x8e, 0x3c, 0x45, 0xfd, 0xc8, 0xf5, 0x1c, 0x6a, +0x67, 0x0d, 0x8f, 0x99, 0x7d, 0x30, 0x21, 0x8c, 0xea, 0x22, 0x87, 0x65, 0xc9, 0xb2, 0x4c, +0xe4, 0x1b, 0x46, 0xba, 0x54, 0xbd, 0x7c, 0xca, 0xd5, 0x8f, 0x5b, 0xa5, 0x01, 0x04, 0xd8, +0x0a, 0x16, 0xbf, 0xb9, 0x50, 0x2e, 0x37, 0x2f, 0x64, 0xf3, 0x70, 0x11, 0x02, 0x05, 0x31, +0x9b, 0xa0, 0xb2, 0x01, 0x5e, 0x4f, 0x19, 0xc9, 0xd4, 0xea, 0xa1, 0x79, 0x54, 0x53, 0xa7, +0xde, 0x2f, 0x49, 0xd3, 0xd1, 0x63, 0xb5, 0x03, 0x15, 0x4e, 0xbf, 0x04, 0xb3, 0x26, 0x8b, +0x20, 0xb2, 0x45, 0xcf, 0xcd, 0x5b, 0x82, 0x32, 0x88, 0x61, 0xa7, 0xa8, 0xb2, 0xa0, 0x72, +0x96, 0xc0, 0xdb, 0x2b, 0xe2, 0x5f, 0xba, 0xe3, 0xf5, 0x8a, 0xde, 0xf1, 0x18, 0x01, 0x16, +0x40, 0xd9, 0x86, 0x12, 0x09, 0x18, 0x1b, 0x05, 0x0c, 0xb1, 0xb5, 0x47, 0xe2, 0x43, 0xab, +0xfe, 0x92, 0x63, 0x7e, 0x95, 0x2b, 0xf0, 0xaf, 0xe1, 0xf1, 0xc3, 0x4a, 0xff, 0x2b, 0x09, +0xbb, 0x4a, 0x0e, 0x9a, 0xc4, 0xd8, 0x64, 0x7d, 0x83, 0xa0, 0x4f, 0x44, 0xdb, 0xc4, 0xa8, +0x58, 0xef, 0xfc, 0x9e, 0x77, 0xf9, 0xa6, 0x8f, 0x58, 0x8b, 0x12, 0xf4, 0xe9, 0x81, 0x12, +0x47, 0x51, 0x41, 0x83, 0xef, 0xf6, 0x73, 0xbc, 0x8e, 0x0f, 0x4c, 0x8f, 0x4e, 0x69, 0x90, +0x77, 0x29, 0x5d, 0x92, 0xb0, 0x6d, 0x06, 0x67, 0x29, 0x60, 0xbd, 0x4b, 0x17, 0xc8, 0x89, +0x69, 0x28, 0x29, 0xd6, 0x78, 0xcb, 0x11, 0x4c, 0xba, 0x8b, 0x68, 0xae, 0x7e, 0x9f, 0xef, +0x95, 0xda, 0xe2, 0x9e, 0x7f, 0xe9, 0x55, 0xe5, 0xe1, 0xe2, 0xb7, 0xe6, 0x5f, 0xbb, 0x2c, +0xa2, 0xe6, 0xee, 0xc7, 0x0a, 0x60, 0xa9, 0xd1, 0x80, 0xdf, 0x7f, 0xd6, 0x97, 0xab, 0x1d, +0x22, 0x25, 0xfc, 0x79, 0x23, 0xe0, 0xae, 0xc5, 0xef, 0x16, 0xa4, 0xa1, 0x0f, 0x92, 0xa9, +0xc7, 0xe3, 0x3a, 0x55, 0xdf, 0x62, 0x49, 0xd9, 0xf5, 0x84, 0x49, 0xc5, 0x90, 0x34, 0xd3, +0xe1, 0xac, 0x99, 0x21, 0xb1, 0x02, 0x76, 0x4a, 0xfa, 0xd4, 0xbb, 0xa4, 0x9c, 0xa2, 0xe2, +0xcb, 0x3d, 0x3b, 0x14, 0x75, 0x60, 0xd1, 0x02, 0xb4, 0xa3, 0xb4, 0x72, 0x06, 0xf9, 0x19, +0x9c, 0xe2, 0xe4, 0xa7, 0x0f, 0x25, 0x88, 0xc6, 0x86, 0xd6, 0x8c, 0x74, 0x4e, 0x6e, 0xfc, +0xa8, 0x48, 0x9e, 0xa7, 0x9d, 0x1a, 0x4b, 0x37, 0x09, 0xc8, 0xb0, 0x10, 0xbe, 0x6f, 0xfe, +0xa3, 0xc4, 0x7a, 0xb5, 0x3d, 0xe8, 0x30, 0xf1, 0x0d, 0xa0, 0xb2, 0x44, 0xfc, 0x9b, 0x8c, +0xf8, 0x61, 0xed, 0x81, 0xd1, 0x62, 0x11, 0xb4, 0xe1, 0xd5, 0x39, 0x52, 0x89, 0xd3, 0xa8, +0x49, 0x31, 0xdf, 0xb6, 0xf9, 0x91, 0xf4, 0x1c, 0x9d, 0x09, 0x95, 0x40, 0x56, 0xe7, 0xe3, +0xcd, 0x5c, 0x92, 0xc1, 0x1d, 0x6b, 0xe9, 0x78, 0x6f, 0x8e, 0x94, 0x42, 0x66, 0xa2, 0xaa, +0xd3, 0xc8, 0x2e, 0xe3, 0xf6, 0x07, 0x72, 0x0b, 0x6b, 0x1e, 0x7b, 0xb9, 0x7c, 0xe0, 0xa0, +0xbc, 0xd9, 0x25, 0xdf, 0x87, 0xa8, 0x5f, 0x9c, 0xcc, 0xf0, 0xdb, 0x42, 0x8e, 0x07, 0x31, +0x13, 0x01, 0x66, 0x32, 0xd1, 0xb8, 0xd6, 0xe3, 0x5e, 0x12, 0x76, 0x61, 0xd3, 0x38, 0x89, +0xe6, 0x17, 0x6f, 0xa5, 0xf2, 0x71, 0x0e, 0xa5, 0xe2, 0x88, 0x30, 0xbb, 0xbe, 0x8a, 0xea, +0xc7, 0x62, 0xc4, 0xcf, 0xb8, 0xcd, 0x33, 0x8d, 0x3d, 0x3e, 0xb5, 0x60, 0x3a, 0x03, 0x92, +0xe4, 0x6d, 0x1b, 0xe0, 0xb4, 0x84, 0x08, 0x55, 0x88, 0xa7, 0x3a, 0xb9, 0x3d, 0x43, 0xc3, +0xc0, 0xfa, 0x07, 0x6a, 0xca, 0x94, 0xad, 0x99, 0x55, 0xf1, 0xf1, 0xc0, 0x23, 0x87, 0x1d, +0x3d, 0x1c, 0xd1, 0x66, 0xa0, 0x57, 0x10, 0x52, 0xa2, 0x7f, 0xbe, 0xf9, 0x88, 0xb6, 0x02, +0xbf, 0x08, 0x23, 0xa9, 0x0c, 0x63, 0x17, 0x2a, 0xae, 0xf5, 0xf7, 0xb7, 0x21, 0x83, 0x92, +0x31, 0x23, 0x0d, 0x20, 0xc3, 0xc2, 0x05, 0x21, 0x62, 0x8e, 0x45, 0xe8, 0x14, 0xc1, 0xda, +0x75, 0xb8, 0xf8, 0x92, 0x01, 0xd0, 0x5d, 0x18, 0x9f, 0x99, 0x11, 0x19, 0xf5, 0x35, 0xe8, +0x7f, 0x20, 0x88, 0x8c, 0x05, 0x75, 0xf5, 0xd7, 0x40, 0x17, 0xbb, 0x1e, 0x36, 0x52, 0xd9, +0xa4, 0x9c, 0xc2, 0x9d, 0x42, 0x81, 0xd8, 0xc7, 0x8a, 0xe7, 0x4c, 0x81, 0xe0, 0xb7, 0x57, +0xed, 0x48, 0x8b, 0xf0, 0x97, 0x15, 0x61, 0xd9, 0x2c, 0x7c, 0x45, 0xaf, 0xc2, 0xcd, 0xfc, +0xaa, 0x13, 0xad, 0x59, 0xcc, 0xb2, 0xb2, 0x6e, 0xdd, 0x63, 0x9c, 0x32, 0x0f, 0xec, 0x83, +0xbe, 0x78, 0xac, 0x91, 0x44, 0x1a, 0x1f, 0xea, 0xfd, 0x5d, 0x8e, 0xb4, 0xc0, 0x84, 0xd4, +0xac, 0xb4, 0x87, 0x5f, 0xac, 0xef, 0xdf, 0xcd, 0x12, 0x56, 0xc8, 0xcd, 0xfe, 0xc5, 0xda, +0xd3, 0xc1, 0x69, 0xf3, 0x61, 0x05, 0xea, 0x25, 0xe2, 0x12, 0x05, 0x8f, 0x39, 0x08, 0x08, +0x7c, 0x37, 0xb6, 0x7e, 0x5b, 0xd8, 0xb1, 0x0e, 0xf2, 0xdb, 0x4b, 0xf1, 0xad, 0x90, 0x01, +0x57, 0xcd, 0xa0, 0xb4, 0x52, 0xe8, 0xf3, 0xd7, 0x8a, 0xbd, 0x4f, 0x9f, 0x21, 0x40, 0x72, +0xa4, 0xfc, 0x0b, 0x01, 0x2b, 0x2f, 0xb6, 0x4c, 0x95, 0x2d, 0x35, 0x33, 0x41, 0x6b, 0xa0, +0x93, 0xe7, 0x2c, 0xf2, 0xd3, 0x72, 0x8b, 0xf4, 0x4f, 0x15, 0x3c, 0xaf, 0xd6, 0x12, 0xde, +0x3f, 0x83, 0x3f, 0xff, 0xf8, 0x7f, 0xf6, 0xcc, 0xa6, 0x7f, 0xc9, 0x9a, 0x6e, 0x1f, 0xc1, +0x0c, 0xfb, 0xee, 0x9c, 0xe7, 0xaf, 0xc9, 0x26, 0x54, 0xef, 0xb0, 0x39, 0xef, 0xb2, 0xe9, +0x23, 0xc4, 0xef, 0xd1, 0xa1, 0xa4, 0x25, 0x24, 0x6f, 0x8d, 0x6a, 0xe5, 0x8a, 0x32, 0x3a, +0xaf, 0xfc, 0xda, 0xce, 0x18, 0x25, 0x42, 0x07, 0x4d, 0x45, 0x8b, 0xdf, 0x85, 0xcf, 0x55, +0xb2, 0x24, 0xfe, 0x9c, 0x69, 0x74, 0xa7, 0x6e, 0xa0, 0xce, 0xc0, 0x39, 0xf4, 0x86, 0xc6, +0x8d, 0xae, 0xb9, 0x48, 0x64, 0x13, 0x0b, 0x40, 0x81, 0xa2, 0xc9, 0xa8, 0x85, 0x51, 0xee, +0x9f, 0xcf, 0xa2, 0x8c, 0x19, 0x52, 0x48, 0xe2, 0xc1, 0xa8, 0x58, 0xb4, 0x10, 0x24, 0x06, +0x58, 0x51, 0xfc, 0xb9, 0x12, 0xec, 0xfd, 0x73, 0xb4, 0x6d, 0x84, 0xfa, 0x06, 0x8b, 0x05, +0x0b, 0x2d, 0xd6, 0xd6, 0x1f, 0x29, 0x82, 0x9f, 0x19, 0x12, 0x1e, 0xb2, 0x04, 0x8f, 0x7f, +0x4d, 0xbd, 0x30, 0x2e, 0xe3, 0xe0, 0x88, 0x29, 0xc5, 0x93, 0xd6, 0x6c, 0x1f, 0x29, 0x45, +0x91, 0xa7, 0x58, 0xcd, 0x05, 0x17, 0xd6, 0x6d, 0xb3, 0xca, 0x66, 0xcc, 0x3c, 0x4a, 0x74, +0xfd, 0x08, 0x10, 0xa6, 0x99, 0x92, 0x10, 0xd2, 0x85, 0xab, 0x6e, 0x1d, 0x0e, 0x8b, 0x26, +0x46, 0xd1, 0x6c, 0x84, 0xc0, 0x26, 0x43, 0x59, 0x68, 0xf0, 0x13, 0x1d, 0xfb, 0xe3, 0xd1, +0xd2, 0xb4, 0x71, 0x9e, 0xf2, 0x59, 0x6a, 0x33, 0x29, 0x79, 0xd2, 0xd7, 0x26, 0xf1, 0xae, +0x78, 0x9e, 0x1f, 0x0f, 0x3f, 0xe3, 0xe8, 0xd0, 0x27, 0x78, 0x77, 0xf6, 0xac, 0x9c, 0x56, +0x39, 0x73, 0x8a, 0x6b, 0x2f, 0x34, 0x78, 0xb1, 0x11, 0xdb, 0xa4, 0x5c, 0x80, 0x01, 0x71, +0x6a, 0xc2, 0xd1, 0x2e, 0x5e, 0x76, 0x28, 0x70, 0x93, 0xae, 0x3e, 0x78, 0xb0, 0x1f, 0x0f, +0xda, 0xbf, 0xfb, 0x8a, 0x67, 0x65, 0x4f, 0x91, 0xed, 0x49, 0x75, 0x78, 0x62, 0xa2, 0x93, +0xb5, 0x70, 0x7f, 0x4d, 0x08, 0x4e, 0x79, 0x61, 0xa8, 0x5f, 0x7f, 0xb4, 0x65, 0x9f, 0x91, +0x54, 0x3a, 0xe8, 0x50, 0x33, 0xd3, 0xd5, 0x8a, 0x7c, 0xf3, 0x9e, 0x8b, 0x77, 0x7b, 0xc6, +0xc6, 0x0c, 0x45, 0x95, 0x1f, 0xb0, 0xd0, 0x0b, 0x27, 0x4a, 0xfd, 0xc7, 0xf7, 0x0d, 0x5a, +0x43, 0xc9, 0x7d, 0x35, 0xb0, 0x7d, 0xc4, 0x9c, 0x57, 0x1e, 0x76, 0x0d, 0xf1, 0x95, 0x30, +0x71, 0xcc, 0xb3, 0x66, 0x3b, 0x63, 0xa8, 0x6c, 0xa3, 0x43, 0xa0, 0x24, 0xcc, 0xb7, 0x53, +0xfe, 0xfe, 0xbc, 0x6e, 0x60, 0x89, 0xaf, 0x16, 0x21, 0xc8, 0x91, 0x6a, 0x89, 0xce, 0x80, +0x2c, 0xf1, 0x59, 0xce, 0xc3, 0x60, 0x61, 0x3b, 0x0b, 0x19, 0xfe, 0x99, 0xac, 0x65, 0x90, +0x15, 0x12, 0x05, 0xac, 0x7e, 0xff, 0x98, 0x7b, 0x66, 0x64, 0x0e, 0x4b, 0x5b, 0xaa, 0x8d, +0x3b, 0xd2, 0x56, 0xcf, 0x99, 0x39, 0xee, 0x22, 0x81, 0xd0, 0x60, 0x06, 0x66, 0x20, 0x81, +0x48, 0x3c, 0x6f, 0x3a, 0x77, 0xba, 0xcb, 0x52, 0xac, 0x79, 0x56, 0xaf, 0xe9, 0x16, 0x17, +0x0a, 0xa3, 0x82, 0x08, 0xd5, 0x3c, 0x97, 0xcb, 0x09, 0xff, 0x7f, 0xf9, 0x4f, 0x60, 0x05, +0xb9, 0x53, 0x26, 0xaa, 0xb8, 0x50, 0xaa, 0x19, 0x25, 0xae, 0x5f, 0xea, 0x8a, 0xd0, 0x89, +0x12, 0x80, 0x43, 0x50, 0x24, 0x12, 0x21, 0x14, 0xcd, 0x77, 0xeb, 0x21, 0xcc, 0x5c, 0x09, +0x64, 0xf3, 0xc7, 0xcb, 0xc5, 0x4b, 0xc3, 0xe7, 0xed, 0xe7, 0x86, 0x2c, 0x1d, 0x8e, 0x19, +0x52, 0x9b, 0x2a, 0x0c, 0x18, 0x72, 0x0b, 0x1e, 0x1b, 0xb0, 0x0f, 0x42, 0x99, 0x04, 0xae, +0xd5, 0xb7, 0x89, 0x1a, 0xb9, 0x4f, 0xd6, 0xaf, 0xf3, 0xc9, 0x93, 0x6f, 0xb0, 0x60, 0x83, +0x6e, 0x6b, 0xd1, 0x5f, 0x3f, 0x1a, 0x83, 0x1e, 0x24, 0x00, 0x87, 0xb5, 0x3e, 0xdb, 0xf9, +0x4d, 0xa7, 0x16, 0x2e, 0x19, 0x5b, 0x8f, 0x1b, 0x0d, 0x47, 0x72, 0x42, 0xe9, 0x0a, 0x11, +0x08, 0x2d, 0x88, 0x1c, 0xbc, 0xc7, 0xb4, 0xbe, 0x29, 0x4d, 0x03, 0x5e, 0xec, 0xdf, 0xf3, +0x3d, 0x2f, 0xe8, 0x1d, 0x9a, 0xd2, 0xd1, 0xab, 0x41, 0x3d, 0x87, 0x11, 0x45, 0xb0, 0x0d, +0x46, 0xf5, 0xe8, 0x95, 0x62, 0x1c, 0x68, 0xf7, 0xa6, 0x5b, 0x39, 0x4e, 0xbf, 0x47, 0xba, +0x5d, 0x7f, 0xb7, 0x6a, 0xf4, 0xba, 0x1d, 0x69, 0xf6, 0xa4, 0xe7, 0xe4, 0x6b, 0x3b, 0x0d, +0x23, 0x16, 0x4a, 0xb2, 0x68, 0xf0, 0xb2, 0x0d, 0x09, 0x17, 0x6a, 0x63, 0x8c, 0x83, 0xd3, +0xbd, 0x05, 0xc9, 0xf6, 0xf0, 0xa1, 0x31, 0x0b, 0x2c, 0xac, 0x83, 0xac, 0x80, 0x34, 0x32, +0xb4, 0xec, 0xd0, 0xbc, 0x54, 0x82, 0x9a, 0xc8, 0xf6, 0xa0, 0x7d, 0xc6, 0x79, 0x73, 0xf4, +0x20, 0x99, 0xf3, 0xb4, 0x01, 0xde, 0x91, 0x27, 0xf2, 0xc0, 0xdc, 0x81, 0x00, 0x4e, 0x7e, +0x07, 0x99, 0xc8, 0x3a, 0x51, 0xbc, 0x38, 0xd6, 0x8a, 0xa2, 0xde, 0x3b, 0x6a, 0x8c, 0x1a, +0x7c, 0x81, 0x0f, 0x3a, 0x1f, 0xe4, 0x05, 0x7b, 0x20, 0x35, 0x6b, 0xa5, 0x6a, 0xa7, 0xe7, +0xbc, 0x9c, 0x20, 0xec, 0x00, 0x15, 0xe2, 0x51, 0xaf, 0x77, 0xeb, 0x29, 0x3c, 0x7d, 0x2e, +0x00, 0x5c, 0x81, 0x21, 0xfa, 0x35, 0x6f, 0x40, 0xef, 0xfb, 0xd1, 0x3f, 0xcc, 0x9d, 0x55, +0x53, 0xfb, 0x5a, 0xa5, 0x56, 0x89, 0x0b, 0x52, 0xeb, 0x57, 0x73, 0x4f, 0x1b, 0x67, 0x24, +0xcb, 0xb8, 0x6a, 0x10, 0x69, 0xd6, 0xfb, 0x52, 0x40, 0xff, 0x20, 0xa5, 0xf3, 0x72, 0xe1, +0x3d, 0xa4, 0x8c, 0x81, 0x66, 0x16, 0x0d, 0x5d, 0xad, 0xa8, 0x50, 0x25, 0x78, 0x31, 0x77, +0x0c, 0x57, 0xe4, 0xe9, 0x15, 0x2d, 0xdb, 0x07, 0x87, 0xc8, 0xb0, 0x43, 0xde, 0xfc, 0xfe, +0xa9, 0xeb, 0xf5, 0xb0, 0xd3, 0x7b, 0xe9, 0x1f, 0x6e, 0xca, 0xe4, 0x03, 0x95, 0xc5, 0xd1, +0x59, 0x72, 0x63, 0xf0, 0x86, 0x54, 0xe8, 0x16, 0x62, 0x0b, 0x35, 0x29, 0xc2, 0x68, 0xd0, +0xd6, 0x3e, 0x90, 0x60, 0x57, 0x1d, 0xc9, 0xed, 0x3f, 0xed, 0xb0, 0x2f, 0x7e, 0x97, 0x02, +0x51, 0xec, 0xee, 0x6f, 0x82, 0x74, 0x76, 0x7f, 0xfb, 0xd6, 0xc4, 0xc3, 0xdd, 0xe8, 0xb1, +0x60, 0xfc, 0xc6, 0xb9, 0x0d, 0x6a, 0x33, 0x78, 0xc6, 0xc1, 0xbf, 0x86, 0x2c, 0x50, 0xcc, +0x9a, 0x70, 0x8e, 0x7b, 0xec, 0xab, 0x95, 0xac, 0x53, 0xa0, 0x4b, 0x07, 0x88, 0xaf, 0x42, +0xed, 0x19, 0x8d, 0xf6, 0x32, 0x17, 0x48, 0x47, 0x1d, 0x41, 0x6f, 0xfe, 0x2e, 0xa7, 0x8f, +0x4b, 0xa0, 0x51, 0xf3, 0xbf, 0x02, 0x0a, 0x48, 0x58, 0xf7, 0xa1, 0x6d, 0xea, 0xa5, 0x13, +0x5a, 0x5b, 0xea, 0x0c, 0x9e, 0x52, 0x4f, 0x9e, 0xb9, 0x71, 0x7f, 0x23, 0x83, 0xda, 0x1b, +0x86, 0x9a, 0x41, 0x29, 0xda, 0x70, 0xe7, 0x64, 0xa1, 0x7b, 0xd5, 0x0a, 0x22, 0x0d, 0x5c, +0x40, 0xc4, 0x81, 0x07, 0x25, 0x35, 0x4a, 0x1c, 0x10, 0xdb, 0x45, 0x0a, 0xff, 0x36, 0xd4, +0xe0, 0xeb, 0x5f, 0x68, 0xd6, 0x67, 0xc6, 0xd0, 0x8b, 0x76, 0x1a, 0x7d, 0x59, 0x42, 0xa1, +0xcb, 0x96, 0x4d, 0x84, 0x09, 0x9a, 0x3d, 0xe0, 0x52, 0x85, 0x6e, 0x48, 0x90, 0x85, 0x2a, +0x63, 0xb2, 0x69, 0xd2, 0x00, 0x43, 0x31, 0x37, 0xb3, 0x52, 0xaf, 0x62, 0xfa, 0xc1, 0xe0, +0x03, 0xfb, 0x62, 0xaa, 0x88, 0xc9, 0xb2, 0x2c, 0xd5, 0xa8, 0xf5, 0xa5, 0x4c, 0x12, 0x59, +0x4e, 0x06, 0x5e, 0x9b, 0x15, 0x66, 0x11, 0xb2, 0x27, 0x92, 0xdc, 0x98, 0x59, 0xde, 0xdf, +0xfa, 0x9a, 0x32, 0x2e, 0xc0, 0x5d, 0x3c, 0x33, 0x41, 0x6d, 0xaf, 0xb2, 0x25, 0x23, 0x14, +0xa5, 0x7b, 0xc7, 0x9b, 0x68, 0xf3, 0xda, 0xeb, 0xe3, 0xa9, 0xe2, 0x6f, 0x0e, 0x1d, 0x1c, +0xba, 0x55, 0xb6, 0x34, 0x6a, 0x93, 0x1f, 0x1f, 0xb8, 0x34, 0xc8, 0x84, 0x08, 0xb1, 0x6b, +0x6a, 0x28, 0x74, 0x74, 0xe5, 0xeb, 0x75, 0xe9, 0x7c, 0xd8, 0xba, 0xd8, 0x42, 0xa5, 0xee, +0x1f, 0x80, 0xd9, 0x96, 0xb2, 0x2e, 0xe7, 0xbf, 0xba, 0xeb, 0xd1, 0x69, 0xbb, 0x8f, 0xfd, +0x5a, 0x63, 0x8f, 0x39, 0x7f, 0xdf, 0x1d, 0x37, 0xd2, 0x18, 0x35, 0x9d, 0xb6, 0xcc, 0xe4, +0x27, 0x81, 0x89, 0x38, 0x38, 0x68, 0x33, 0xe7, 0x78, 0xd8, 0x76, 0xf5, 0xee, 0xd0, 0x4a, +0x07, 0x69, 0x19, 0x7a, 0xad, 0x18, 0xb1, 0x94, 0x61, 0x45, 0x53, 0xa2, 0x48, 0xda, 0x96, +0x4a, 0xf9, 0xee, 0x94, 0x2a, 0x1f, 0x6e, 0x18, 0x3c, 0x92, 0x46, 0xd1, 0x1a, 0x28, 0x18, +0x32, 0x1f, 0x3a, 0x45, 0xbe, 0x04, 0x35, 0x92, 0xe5, 0xa3, 0xcb, 0xb5, 0x2e, 0x32, 0x43, +0xac, 0x65, 0x17, 0x89, 0x99, 0x15, 0x03, 0x9e, 0xb1, 0x23, 0x2f, 0xed, 0x76, 0x4d, 0xd8, +0xac, 0x21, 0x40, 0xc4, 0x99, 0x4e, 0x65, 0x71, 0x2c, 0xb3, 0x45, 0xab, 0xfb, 0xe7, 0x72, +0x39, 0x56, 0x30, 0x6d, 0xfb, 0x74, 0xeb, 0x99, 0xf3, 0xcd, 0x57, 0x5c, 0x78, 0x75, 0xe9, +0x8d, 0xc3, 0xa2, 0xfb, 0x5d, 0xe0, 0x90, 0xc5, 0x55, 0xad, 0x91, 0x53, 0x4e, 0x9e, 0xbd, +0x8c, 0x49, 0xa4, 0xa4, 0x69, 0x10, 0x0c, 0xc5, 0x76, 0xe9, 0x25, 0x86, 0x8d, 0x66, 0x23, +0xa8, 0xdb, 0x5c, 0xe8, 0xd9, 0x30, 0xe1, 0x15, 0x7b, 0xc0, 0x99, 0x0f, 0x03, 0xec, 0xaa, +0x12, 0xef, 0xce, 0xd4, 0xea, 0x55, 0x5c, 0x08, 0x86, 0xf4, 0xf4, 0xb0, 0x83, 0x42, 0x95, +0x37, 0xb6, 0x38, 0xe0, 0x2b, 0x54, 0x89, 0xbd, 0x4e, 0x20, 0x9d, 0x3f, 0xc3, 0x4b, 0xb7, +0xec, 0xfa, 0x5a, 0x14, 0x03, 0xcb, 0x64, 0xc8, 0x34, 0x4a, 0x4b, 0x6e, 0xf8, 0x6e, 0x56, +0xf6, 0xdd, 0x5f, 0xa1, 0x24, 0xe2, 0xd4, 0xd0, 0x82, 0x64, 0x1f, 0x8e, 0x9b, 0xfa, 0xb4, +0xcb, 0xdb, 0x0a, 0xe8, 0x15, 0xfc, 0x15, 0xab, 0x4b, 0x18, 0xbf, 0xd4, 0x42, 0x14, 0x48, +0x82, 0x85, 0xdd, 0xeb, 0x49, 0x1b, 0x0b, 0x0b, 0x05, 0xe9, 0xb4, 0xa1, 0x33, 0x0a, 0x5d, +0x0e, 0x6c, 0x4b, 0xc0, 0xd6, 0x6c, 0x7c, 0xfb, 0x69, 0x0b, 0x53, 0x19, 0xe4, 0xf3, 0x35, +0xfc, 0xbe, 0xa1, 0x34, 0x02, 0x09, 0x4f, 0x74, 0x86, 0x92, 0xcd, 0x5d, 0x1a, 0xc1, 0x27, +0x0c, 0xf2, 0xc5, 0xcf, 0xdd, 0x23, 0x93, 0x02, 0xbd, 0x41, 0x5e, 0x42, 0xf0, 0xa0, 0x9d, +0x0c, 0x72, 0xc8, 0xec, 0x32, 0x0a, 0x8a, 0xfd, 0x3d, 0x5a, 0x41, 0x27, 0x0c, 0x88, 0x59, +0xad, 0x94, 0x2e, 0xef, 0x5d, 0x8f, 0xc7, 0xdf, 0x66, 0xe4, 0xdd, 0x56, 0x6c, 0x7b, 0xca, +0x55, 0x81, 0xae, 0xae, 0x5c, 0x1b, 0x1a, 0xab, 0xae, 0x99, 0x8d, 0xcc, 0x42, 0x97, 0x59, +0xf4, 0x14, 0x3f, 0x75, 0xc6, 0xd1, 0x88, 0xba, 0xaa, 0x84, 0x4a, 0xd0, 0x34, 0x08, 0x3b, +0x7d, 0xdb, 0x15, 0x06, 0xb0, 0x5c, 0xbd, 0x40, 0xf5, 0xa8, 0xec, 0xae, 0x36, 0x40, 0xdd, +0x90, 0x1c, 0x3e, 0x0d, 0x7e, 0x73, 0xc7, 0xc2, 0xc5, 0x6a, 0xff, 0x52, 0x05, 0x7f, 0xbe, +0xd0, 0x92, 0xfd, 0xb3, 0x6f, 0xff, 0x5d, 0xb7, 0x97, 0x64, 0x73, 0x7b, 0xca, 0xd1, 0x98, +0x24, 0x6b, 0x0b, 0x01, 0x68, 0xdd, 0x27, 0x85, 0x85, 0xb5, 0x83, 0xc1, 0xe0, 0x50, 0x64, +0xc7, 0xaf, 0xf1, 0xc6, 0x4d, 0xb1, 0xef, 0xc9, 0xb4, 0x0a, 0x6d, 0x65, 0xf3, 0x47, 0xcc, +0xa3, 0x02, 0x21, 0x0c, 0xbe, 0x22, 0x29, 0x05, 0xcf, 0x5f, 0xe8, 0x94, 0x6c, 0xe5, 0xdc, +0xc4, 0xdf, 0xbe, 0x3e, 0xa8, 0xb4, 0x18, 0xb0, 0x99, 0xb8, 0x6f, 0xff, 0x5d, 0xb9, 0xfd, +0x3b, 0x5d, 0x16, 0xbf, 0x3e, 0xd8, 0xb3, 0xd8, 0x08, 0x34, 0xf6, 0x47, 0x35, 0x5b, 0x72, +0x1a, 0x33, 0xad, 0x52, 0x5d, 0xb8, 0xd0, 0x77, 0xc6, 0xab, 0xba, 0x55, 0x09, 0x5f, 0x02, +0xf8, 0xd4, 0x5f, 0x53, 0x06, 0x91, 0xcd, 0x74, 0x42, 0xae, 0x54, 0x91, 0x81, 0x62, 0x13, +0x6f, 0xd8, 0xa9, 0x77, 0xc3, 0x6c, 0xcb, 0xf1, 0x29, 0x5a, 0xcc, 0xda, 0x35, 0xbd, 0x52, +0x23, 0xbe, 0x59, 0xeb, 0x12, 0x6d, 0xb7, 0x53, 0xee, 0xfc, 0xb4, 0x1b, 0x13, 0x5e, 0xba, +0x16, 0x7c, 0xc5, 0xf3, 0xe3, 0x6d, 0x07, 0x78, 0xf5, 0x2b, 0x21, 0x05, 0x88, 0x4c, 0xc0, +0xa1, 0xe3, 0x36, 0x10, 0xf8, 0x1b, 0xd8, 0x17, 0xfb, 0x6a, 0x4e, 0xd8, 0xb3, 0x47, 0x2d, +0x99, 0xbd, 0xbb, 0x5d, 0x37, 0x7d, 0xba, 0xf1, 0xe1, 0x7c, 0xc0, 0xc5, 0x54, 0x62, 0x7f, +0xcf, 0x5a, 0x4a, 0x93, 0xcc, 0xf1, 0x1b, 0x34, 0xc8, 0xa6, 0x05, 0x4c, 0x55, 0x8b, 0x54, +0x84, 0xd5, 0x77, 0xeb, 0xc0, 0x6d, 0x3a, 0x29, 0xbd, 0x75, 0x61, 0x09, 0x9a, 0x2c, 0xbb, +0xf7, 0x18, 0x79, 0x34, 0x90, 0x24, 0xa5, 0x81, 0x70, 0x87, 0xc5, 0x02, 0x7c, 0xba, 0xd4, +0x5e, 0x14, 0x8e, 0xe4, 0xed, 0xa2, 0x61, 0x6a, 0xb9, 0x6e, 0xb5, 0x4a, 0xb9, 0x01, 0x46, +0xf4, 0xcf, 0xbc, 0x09, 0x2f, 0x27, 0x4b, 0xbd, 0x86, 0x7a, 0x10, 0xe1, 0xd4, 0xc8, 0xd9, +0x20, 0x8d, 0x8a, 0x63, 0x00, 0x63, 0x44, 0xeb, 0x54, 0x0b, 0x75, 0x49, 0x10, 0xa2, 0xa7, +0xad, 0xb9, 0xd1, 0x01, 0x80, 0x63, 0x25, 0xc8, 0x12, 0xa6, 0xce, 0x1e, 0xbe, 0xfe, 0x7e, +0x5f, 0x3c, 0xdb, 0x34, 0xea, 0x37, 0xec, 0x3b, 0xd5, 0x28, 0xd2, 0x07, 0x8c, 0x9a, 0xb6, +0xee, 0x5e, 0x3e, 0xdf, 0x1d, 0x99, 0xb0, 0xe2, 0x46, 0xef, 0x5c, 0x1b, 0xb4, 0xea, 0x56, +0x2e, 0xde, 0x1f, 0x9d, 0xb8, 0xd3, 0x24, 0xab, 0xd4, 0x2a, 0xd6, 0x2e, 0xde, 0x1f, 0x9d, +0xb8, 0xf2, 0x66, 0x2f, 0xbd, 0xf8, 0x72, 0x66, 0x4e, 0x1e, 0x9f, 0x9d, 0xb8, 0xf2, 0x47, +0x0c, 0x9a, 0xb6, 0xee, 0x3f, 0xfc, 0x7a, 0x57, 0x0d, 0x79, 0x70, 0x62, 0x27, 0xad, 0xb9, +0xd1, 0x01, 0x61, 0x40, 0x02, 0x67, 0x2d, 0xd8, 0x32, 0xe6, 0x2f, 0xdc, 0x3a, 0xd7, 0x2c, +0xbb, 0xf4, 0x4b, 0xf5, 0x49, 0xf1, 0x60, 0x23, 0xc4, 0x0a, 0x77, 0x4d, 0xf9, 0x51, 0x01, +0x80, 0x63, 0x25, 0xa9, 0xb1, 0xe0, 0x42, 0xe7, 0x4c, 0x1a, 0x97, 0xac, 0xbb, 0xf4, 0x6a, +0x37, 0xcd, 0x18, 0xb2, 0xe6, 0x2f, 0xdc, 0x1b, 0x95, 0xa8, 0xd2, 0x07, 0x6d, 0x58, 0x32, +0xe6, 0x4e, 0x1e, 0x9f, 0xbc, 0xfa, 0x57, 0x0d, 0x79, 0x51, 0x20, 0xc2, 0x06, 0x6f, 0x5c, +0x1b, 0x95, 0xa8, 0xb3, 0xc5, 0xe9, 0x31, 0xe0, 0x23, 0xc4, 0x0a, 0x77, 0x4d, 0x18, 0x93, +0x85, 0x69, 0x31, 0xc1, 0xe1, 0x21, 0xc0, 0xe3, 0x44, 0x0a, 0x77, 0x6c, 0x5a, 0x17, 0x8d, +0x98, 0x93, 0xa4, 0xab, 0xd4, 0x2a, 0xb7, 0xec, 0x5a, 0x17, 0xac, 0xbb, 0xf4, 0x4b, 0x14, +0xaa, 0xb7, 0xec, 0x3b, 0xd5, 0x28, 0xb3, 0xc5, 0xe9, 0x31, 0xc1, 0x00, 0x82, 0x67, 0x4c, +0xfb, 0x55, 0x28, 0xd2, 0x26, 0xaf, 0xbd, 0xd9, 0x11, 0x81, 0x61, 0x21, 0xa1, 0xa1, 0xc0, +0x02, 0x86, 0x6f, 0x5c, 0x1b, 0xb4, 0xcb, 0x14, 0x8b, 0x94, 0xaa, 0xd6, 0x2e, 0xbf, 0xdd, +0x19, 0xb0, 0xe2, 0x46, 0x0e, 0x7f, 0x7c, 0x5b, 0x15, 0x89, 0x90, 0x83, 0x84, 0x6b, 0x54, +0x0b, 0x75, 0x68, 0x52, 0x07, 0x6d, 0x58, 0x32, 0xc7, 0xed, 0x58, 0x32, 0xc7, 0xed, 0x58, +0x32, 0xe6, 0x4e, 0xff, 0x7c, 0x7a, 0x76, 0x6e, 0x3f, 0xdd, 0x38, 0xd3, 0x05, 0x88, 0x92, +0xa6, 0xaf, 0xdc, 0x1b, 0xb4, 0xcb, 0xf5, 0x68, 0x52, 0x07, 0x8c, 0x7b, 0x55, 0x09, 0x90, +0x83, 0x84, 0x6b, 0x54, 0x2a, 0xb7, 0xec, 0x3b, 0xd5, 0x09, 0x90, 0xa2, 0xc6, 0x0e, 0x7f, +0x7c, 0x7a, 0x57, 0x0d, 0x98, 0xb2, 0xc7, 0xed, 0x58, 0x32, 0xc7, 0x0c, 0x7b, 0x74, 0x4b, +0x14, 0x8b, 0x94, 0xaa, 0xb7, 0xcd, 0x18, 0x93, 0xa4, 0xca, 0x16, 0xae, 0xbf, 0xdd, 0x19, +0xb0, 0xe2, 0x46, 0x0e, 0x7f, 0x5d, 0x19, 0x91, 0x81, 0x80, 0x63, 0x44, 0xeb, 0x35, 0xc9, +0x10, 0x83, 0x65, 0x48, 0x12, 0xa6, 0xce, 0x1e, 0x9f, 0xbc, 0xdb, 0x15, 0x89, 0x71, 0x60, +0x23, 0xc4, 0xeb, 0x54, 0x2a, 0xb7, 0xec, 0x5a, 0x36, 0xcf, 0x81, 0x10, 0xac, 0x74 }; + +// clang-format off diff --git a/keyboards/oddball/pmw/pmw.h b/keyboards/40percentclub/nano/keymaps/drashna/config.h similarity index 62% rename from keyboards/oddball/pmw/pmw.h rename to keyboards/40percentclub/nano/keymaps/drashna/config.h index cc3c9ec5eb..411ee8a81b 100644 --- a/keyboards/oddball/pmw/pmw.h +++ b/keyboards/40percentclub/nano/keymaps/drashna/config.h @@ -1,4 +1,4 @@ -/* Copyright 2020 Alexander Tulloh +/* Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -16,20 +16,7 @@ #pragma once -#include +#define ANALOG_JOYSTICK_X_AXIS_PIN B4 +#define ANALOG_JOYSTICK_Y_AXIS_PIN B5 -typedef struct { - /* 100 - 12000 CPI supported */ - uint16_t cpi; -} config_pmw_t; - -typedef struct { - int16_t x; - int16_t y; -} report_pmw_t; - -void pmw_init(void); -config_pmw_t pmw_get_config(void); -void pmw_set_config(config_pmw_t); -/* Reads and clears the current delta values on the PMW sensor */ -report_pmw_t pmw_get_report(void); +#define ANALOG_JOYSTICK_CLICK_PIN E6 diff --git a/keyboards/40percentclub/nano/keymaps/drashna/keymap.c b/keyboards/40percentclub/nano/keymaps/drashna/keymap.c index 13f89dd53d..cc5991d7a2 100644 --- a/keyboards/40percentclub/nano/keymaps/drashna/keymap.c +++ b/keyboards/40percentclub/nano/keymaps/drashna/keymap.c @@ -29,98 +29,3 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; // clang-format on - -// Joystick -// Set Pins -// uint8_t xPin = 8; // VRx / /B4 -// uint8_t yPin = 7; // VRy // B5 -uint8_t swPin = E6; // SW - -// Set Parameters -uint16_t minAxisValue = 0; -uint16_t maxAxisValue = 1023; - -uint8_t maxCursorSpeed = 2; -uint8_t precisionSpeed = 1; -uint8_t speedRegulator = 20; // Lower Values Create Faster Movement - -int8_t xPolarity = 1; -int8_t yPolarity = 1; - -uint8_t cursorTimeout = 10; - -int16_t xOrigin, yOrigin; - -uint16_t lastCursor = 0; - -int16_t axisCoordinate(uint8_t pin, uint16_t origin) { - int8_t direction; - int16_t distanceFromOrigin; - int16_t range; - - int16_t position = analogReadPin(pin); - - if (origin == position) { - return 0; - } else if (origin > position) { - distanceFromOrigin = origin - position; - range = origin - minAxisValue; - direction = -1; - } else { - distanceFromOrigin = position - origin; - range = maxAxisValue - origin; - direction = 1; - } - - float percent = (float)distanceFromOrigin / range; - int16_t coordinate = (int16_t)(percent * 100); - if (coordinate < 0) { - return 0; - } else if (coordinate > 100) { - return 100 * direction; - } else { - return coordinate * direction; - } -} - -int8_t axisToMouseComponent(uint8_t pin, int16_t origin, uint8_t maxSpeed, int8_t polarity) { - int coordinate = axisCoordinate(pin, origin); - if (coordinate != 0) { - float percent = (float)coordinate / 100; - if (get_mods() & MOD_BIT(KC_LSFT)) { - return percent * precisionSpeed * polarity * (abs(coordinate) / speedRegulator); - } else { - return percent * maxCursorSpeed * polarity * (abs(coordinate) / speedRegulator); - } - } else { - return 0; - } -} - -void pointing_device_task(void) { - report_mouse_t report = pointing_device_get_report(); - - // todo read as one vector - if (timer_elapsed(lastCursor) > cursorTimeout) { - lastCursor = timer_read(); - report.x = axisToMouseComponent(B4, xOrigin, maxCursorSpeed, xPolarity); - report.y = axisToMouseComponent(B5, yOrigin, maxCursorSpeed, yPolarity); - } - // - if (!readPin(E6)) { - report.buttons |= MOUSE_BTN1; - } else { - report.buttons &= ~MOUSE_BTN1; - } - - pointing_device_set_report(report); - pointing_device_send(); -} - -void matrix_init_keymap(void) { - // init pin? Is needed? - setPinInputHigh(E6); - // Account for drift - xOrigin = analogReadPin(B4); - yOrigin = analogReadPin(B5); -} diff --git a/keyboards/40percentclub/nano/keymaps/drashna/rules.mk b/keyboards/40percentclub/nano/keymaps/drashna/rules.mk index 2b72a112b0..aa7966a8b5 100644 --- a/keyboards/40percentclub/nano/keymaps/drashna/rules.mk +++ b/keyboards/40percentclub/nano/keymaps/drashna/rules.mk @@ -1,7 +1,6 @@ -POINTING_DEVICE_ENABLE = yes -RGBLIGHT_ENABLE = no -CONSOLE_ENABLE = no +POINTING_DEVICE_ENABLE = yes +POINTING_DEVICE_DRIVER = analog_joystick +RGBLIGHT_ENABLE = no +CONSOLE_ENABLE = no -BOOTLOADER = qmk-dfu - -SRC += analog.c +BOOTLOADER = qmk-dfu diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/config.h index ce35197f71..6f702bd59e 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/config.h +++ b/keyboards/handwired/tractyl_manuform/5x6_right/config.h @@ -31,6 +31,7 @@ along with this program. If not, see . #define DIODE_DIRECTION COL2ROW #define ROTATIONAL_TRANSFORM_ANGLE -25 +#define POINTING_DEVICE_INVERT_X /* Bootmagic Lite key configuration */ #define BOOTMAGIC_LITE_ROW 0 diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c b/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c index 5bfc21fd14..1275950766 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c +++ b/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c @@ -174,7 +174,11 @@ bool tap_toggling = false; # define TAP_CHECK TAPPING_TERM # endif -void process_mouse_user(report_mouse_t* mouse_report, int8_t x, int8_t y) { +report_mouse_t pointing_device_task_user(report_mouse_t mouse_report) { + int8_t x = mouse_report.x, y = mouse_report.y; + mouse_report.x = 0; + mouse_report.y = 0; + if (x != 0 && y != 0) { mouse_timer = timer_read(); # ifdef OLED_ENABLE @@ -185,13 +189,14 @@ void process_mouse_user(report_mouse_t* mouse_report, int8_t x, int8_t y) { x = (x > 0 ? x * x / 16 + x : -x * x / 16 + x); y = (y > 0 ? y * y / 16 + y : -y * y / 16 + y); } - mouse_report->x = x; - mouse_report->y = y; + mouse_report.x = x; + mouse_report.y = y; if (!layer_state_is(_MOUSE)) { layer_on(_MOUSE); } } } + return mouse_report; } void matrix_scan_keymap(void) { diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/rules.mk b/keyboards/handwired/tractyl_manuform/5x6_right/rules.mk index c9bc2dbb99..699e826485 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/rules.mk +++ b/keyboards/handwired/tractyl_manuform/5x6_right/rules.mk @@ -16,11 +16,11 @@ AUDIO_ENABLE = no # Audio output SWAP_HANDS_ENABLE = yes POINTING_DEVICE_ENABLE = yes +POINTING_DEVICE_DRIVER = pmw3360 MOUSE_SHARED_EP = no SPLIT_KEYBOARD = yes -SRC += drivers/sensors/pmw3360.c -QUANTUM_LIB_SRC += spi_master.c tm_sync.c +QUANTUM_LIB_SRC += tm_sync.c DEFAULT_FOLDER = handwired/tractyl_manuform/5x6_right/teensy2pp diff --git a/keyboards/handwired/tractyl_manuform/tm_sync.c b/keyboards/handwired/tractyl_manuform/tm_sync.c index 1cb3549469..4739af1e76 100644 --- a/keyboards/handwired/tractyl_manuform/tm_sync.c +++ b/keyboards/handwired/tractyl_manuform/tm_sync.c @@ -17,7 +17,6 @@ #include "tractyl_manuform.h" #include "transactions.h" #include -#include "drivers/sensors/pmw3360.h" kb_config_data_t kb_config; kb_mouse_report_t sync_mouse_report; @@ -82,6 +81,6 @@ void housekeeping_task_sync(void) { void trackball_set_cpi(uint16_t cpi) { kb_config.device_cpi = cpi; if (!is_keyboard_left()) { - pmw_set_cpi(cpi); + pointing_device_set_cpi(cpi); } } diff --git a/keyboards/handwired/tractyl_manuform/tractyl_manuform.c b/keyboards/handwired/tractyl_manuform/tractyl_manuform.c index d851528ffb..5f476fcc98 100644 --- a/keyboards/handwired/tractyl_manuform/tractyl_manuform.c +++ b/keyboards/handwired/tractyl_manuform/tractyl_manuform.c @@ -34,55 +34,7 @@ keyboard_config_t keyboard_config; uint16_t dpi_array[] = TRACKBALL_DPI_OPTIONS; #define DPI_OPTION_SIZE (sizeof(dpi_array) / sizeof(uint16_t)) -bool BurstState = false; // init burst state for Trackball module -uint16_t MotionStart = 0; // Timer for accel, 0 is resting state -__attribute__((weak)) void process_mouse_user(report_mouse_t* mouse_report, int8_t x, int8_t y) { - mouse_report->x = x; - mouse_report->y = y; -} - -__attribute__((weak)) void process_mouse(void) { - report_pmw_t data = pmw_read_burst(); - // Reset timer if stopped moving - if (!data.isMotion) { - if (MotionStart != 0) MotionStart = 0; - return; - } - - if (data.isOnSurface) { - // Set timer if new motion - if (MotionStart == 0) { - if (debug_mouse) dprintf("Starting motion.\n"); - MotionStart = timer_read(); - } - - if (debug_mouse) { - dprintf("Delt] d: %d t: %u\n", abs(data.dx) + abs(data.dy), MotionStart); - } - if (debug_mouse) { - dprintf("Pre ] X: %d, Y: %d\n", data.dx, data.dy); - } -#if defined(PROFILE_LINEAR) - float scale = float(timer_elaspsed(MotionStart)) / 1000.0; - data.dx *= scale; - data.dy *= scale; -#elif defined(PROFILE_INVERSE) - // TODO -#else - // no post processing -#endif - - // Wrap to HID size - data.dx = constrain(data.dx, -127, 127); - data.dy = constrain(data.dy, -127, 127); - if (debug_mouse) dprintf("Cons] X: %d, Y: %d\n", data.dx, data.dy); - // dprintf("Elapsed:%u, X: %f Y: %\n", i, pgm_read_byte(firmware_data+i)); - - sync_mouse_report.x = -data.dx; - sync_mouse_report.y = data.dy; - } -} bool process_record_kb(uint16_t keycode, keyrecord_t* record) { if (!process_record_user(keycode, record)) { @@ -109,11 +61,7 @@ bool process_record_kb(uint16_t keycode, keyrecord_t* record) { #ifndef MOUSEKEY_ENABLE if (IS_MOUSEKEY_BUTTON(keycode)) { report_mouse_t currentReport = pointing_device_get_report(); - if (record->event.pressed) { - currentReport.buttons |= 1 << (keycode - KC_MS_BTN1); - } else { - currentReport.buttons &= ~(1 << (keycode - KC_MS_BTN1)); - } + currentReport.buttons = pointing_device_handle_buttons(currentReport.buttons, record->event.pressed, keycode - KC_MS_BTN1); pointing_device_set_report(currentReport); pointing_device_send(); } @@ -145,33 +93,28 @@ void keyboard_post_init_kb(void) { } #ifdef POINTING_DEVICE_ENABLE -void pointing_device_init(void) { - if (!is_keyboard_left()) { - // initialize ball sensor - pmw_spi_init(); - } +void pointing_device_init_kb(void) { trackball_set_cpi(dpi_array[keyboard_config.dpi_config]); + pointing_device_init_user(); } -void pointing_device_task(void) { - report_mouse_t mouse_report = pointing_device_get_report(); - +report_mouse_t pointing_device_task_kb(report_mouse_t mouse_report) { if (is_keyboard_left()) { if (is_keyboard_master()) { transaction_rpc_recv(RPC_ID_POINTER_STATE_SYNC, sizeof(sync_mouse_report), &sync_mouse_report); - process_mouse_user(&mouse_report, sync_mouse_report.x, sync_mouse_report.y); + mouse_report.x = sync_mouse_report.x; + mouse_report.y = sync_mouse_report.y; + pointing_device_task_user(mouse_report); } } else { - process_mouse(); if (is_keyboard_master()) { - process_mouse_user(&mouse_report, sync_mouse_report.x, sync_mouse_report.y); - sync_mouse_report.x = 0; - sync_mouse_report.y = 0; + pointing_device_task_user(mouse_report); + } else { + sync_mouse_report.x = mouse_report.x; + sync_mouse_report.y = mouse_report.y; } } - - pointing_device_set_report(mouse_report); - pointing_device_send(); + return mouse_report; } #endif diff --git a/keyboards/oddball/config.h b/keyboards/oddball/config.h index 050084d2d3..4bc9c7997c 100644 --- a/keyboards/oddball/config.h +++ b/keyboards/oddball/config.h @@ -58,3 +58,6 @@ /* Bootmagic Lite key configuration */ // #define BOOTMAGIC_LITE_ROW 0 // #define BOOTMAGIC_LITE_COLUMN 0 + +#define ADNS9800_CS_PIN SPI_SS_PIN +#define PMW3360_CS_PIN SPI_SS_PIN diff --git a/keyboards/oddball/keymaps/default/config.h b/keyboards/oddball/keymaps/default/config.h deleted file mode 100644 index 7eddc070dc..0000000000 --- a/keyboards/oddball/keymaps/default/config.h +++ /dev/null @@ -1 +0,0 @@ -#define ADNS_9800 diff --git a/keyboards/oddball/keymaps/default/rules.mk b/keyboards/oddball/keymaps/default/rules.mk new file mode 100644 index 0000000000..84de35aeb1 --- /dev/null +++ b/keyboards/oddball/keymaps/default/rules.mk @@ -0,0 +1 @@ +POINTING_DEVICE_DRIVER = adns9800 diff --git a/keyboards/oddball/keymaps/pmw3360/config.h b/keyboards/oddball/keymaps/pmw3360/config.h deleted file mode 100644 index f9af5f3911..0000000000 --- a/keyboards/oddball/keymaps/pmw3360/config.h +++ /dev/null @@ -1 +0,0 @@ -#define PMW_3360 diff --git a/keyboards/oddball/keymaps/pmw3360/rules.mk b/keyboards/oddball/keymaps/pmw3360/rules.mk new file mode 100644 index 0000000000..fab9162dc6 --- /dev/null +++ b/keyboards/oddball/keymaps/pmw3360/rules.mk @@ -0,0 +1 @@ +POINTING_DEVICE_DRIVER = pmw3360 diff --git a/keyboards/oddball/oddball.c b/keyboards/oddball/oddball.c index 7ac6d99016..bbc3b3f2e4 100644 --- a/keyboards/oddball/oddball.c +++ b/keyboards/oddball/oddball.c @@ -16,21 +16,17 @@ #include "oddball.h" #include "pointing_device.h" -#include "optical_sensor/optical_sensor.h" - -#define CLAMP_HID(value) value < -127 ? -127 : value > 127 ? 127 : value +extern const pointing_device_driver_t pointing_device_driver; static bool scroll_pressed; static bool mouse_buttons_dirty; static int8_t scroll_h; static int8_t scroll_v; -void pointing_device_init(void){ +void pointing_device_init_kb(void){ if(!is_keyboard_master()) return; - optical_sensor_init(); - // read config from EEPROM and update if needed config_oddball_t kb_config; @@ -41,21 +37,17 @@ void pointing_device_init(void){ eeconfig_update_kb(kb_config.raw); } - optical_sensor_set_config((config_optical_sensor_t){ kb_config.cpi }); + pointing_device_set_cpi(kb_config.cpi); } -void pointing_device_task(void){ - if(!is_keyboard_master()) - return; - - report_mouse_t mouse_report = pointing_device_get_report(); - report_optical_sensor_t sensor_report = optical_sensor_get_report(); - - int8_t clamped_x = CLAMP_HID(sensor_report.x); - int8_t clamped_y = CLAMP_HID(sensor_report.y); +report_mouse_t pointing_device_task_kb(report_mouse_t mouse_report) { + if (!is_keyboard_master()) return mouse_report; - if(scroll_pressed) { + int8_t clamped_x = mouse_report.x, clamped_y = mouse_report.y; + mouse_report.x = 0; + mouse_report.y = 0; + if (scroll_pressed) { // accumulate scroll scroll_h += clamped_x; scroll_v += clamped_y; @@ -65,33 +57,21 @@ void pointing_device_task(void){ // clear accumulated scroll on assignment - if(scaled_scroll_h != 0){ + if (scaled_scroll_h != 0) { mouse_report.h = -scaled_scroll_h; - scroll_h = 0; + scroll_h = 0; } - if(scaled_scroll_v != 0){ + if (scaled_scroll_v != 0) { mouse_report.v = -scaled_scroll_v; - scroll_v = 0; + scroll_v = 0; } - } - else { + } else { mouse_report.x = -clamped_x; mouse_report.y = clamped_y; } - pointing_device_set_report(mouse_report); - - // only send report on change as even sending report with no change is treated as movement - if(mouse_buttons_dirty || - mouse_report.x != 0 || - mouse_report.y != 0 || - mouse_report.h != 0 || - mouse_report.v != 0){ - - mouse_buttons_dirty = false; - pointing_device_send(); - } + return mouse_report; } static void on_cpi_button(uint16_t cpi, keyrecord_t *record) { @@ -99,7 +79,7 @@ static void on_cpi_button(uint16_t cpi, keyrecord_t *record) { if(!record->event.pressed) return; - optical_sensor_set_config((config_optical_sensor_t){ cpi }); + pointing_device_set_cpi(cpi); config_oddball_t kb_config; kb_config.cpi = cpi; @@ -165,5 +145,5 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) { default: return true; - } + } } diff --git a/keyboards/oddball/optical_sensor/optical_sensor.h b/keyboards/oddball/optical_sensor/optical_sensor.h deleted file mode 100644 index 00955209e2..0000000000 --- a/keyboards/oddball/optical_sensor/optical_sensor.h +++ /dev/null @@ -1,53 +0,0 @@ -/* Copyright 2020 Alexander Tulloh - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -/* common interface for opitcal sensors */ - -#if defined ADNS_9800 - #include "drivers/sensors/adns9800.h" - #define config_optical_sensor_t config_adns_t - #define report_optical_sensor_t report_adns_t - #define optical_sensor_init adns_init - #define optical_sensor_get_config adns_get_config - #define optical_sensor_set_config adns_set_config - #define optical_sensor_get_report adns_get_report -#elif defined PMW_3360 - #include "../pmw/pmw.h" - #define config_optical_sensor_t config_pmw_t - #define report_optical_sensor_t report_pmw_t - #define optical_sensor_init pmw_init - #define optical_sensor_get_config pmw_get_config - #define optical_sensor_set_config pmw_set_config - #define optical_sensor_get_report pmw_get_report -#else - /* fallback stub */ - - #include - - typedef struct { - uint16_t cpi; - } config_optical_sensor_t; - - typedef struct { - int16_t x; - int16_t y; - } report_optical_sensor_t; - - #define optical_sensor_init(){ } - #define optical_sensor_get_config() (config_optical_sensor_t){ } - #define optical_sensor_set_config(config_optical_sensor_t){ } - #define optical_sensor_get_report() (report_optical_sensor_t){ } -#endif diff --git a/keyboards/oddball/pmw/pmw.c b/keyboards/oddball/pmw/pmw.c deleted file mode 100644 index 51d6927024..0000000000 --- a/keyboards/oddball/pmw/pmw.c +++ /dev/null @@ -1,226 +0,0 @@ -/* Copyright 2020 Alexander Tulloh - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -#include "spi_master.h" -#include "quantum.h" -#include "pmw3360_srom_0x04.h" -#include "pmw.h" - -// registers -#define Product_ID 0x00 -#define Revision_ID 0x01 -#define Motion 0x02 -#define Delta_X_L 0x03 -#define Delta_X_H 0x04 -#define Delta_Y_L 0x05 -#define Delta_Y_H 0x06 -#define SQUAL 0x07 -#define Raw_Data_Sum 0x08 -#define Maximum_Raw_data 0x09 -#define Minimum_Raw_data 0x0A -#define Shutter_Lower 0x0B -#define Shutter_Upper 0x0C -#define Control 0x0D -#define Config1 0x0F -#define Config2 0x10 -#define Angle_Tune 0x11 -#define Frame_Capture 0x12 -#define SROM_Enable 0x13 -#define Run_Downshift 0x14 -#define Rest1_Rate_Lower 0x15 -#define Rest1_Rate_Upper 0x16 -#define Rest1_Downshift 0x17 -#define Rest2_Rate_Lower 0x18 -#define Rest2_Rate_Upper 0x19 -#define Rest2_Downshift 0x1A -#define Rest3_Rate_Lower 0x1B -#define Rest3_Rate_Upper 0x1C -#define Observation 0x24 -#define Data_Out_Lower 0x25 -#define Data_Out_Upper 0x26 -#define Raw_Data_Dump 0x29 -#define SROM_ID 0x2A -#define Min_SQ_Run 0x2B -#define Raw_Data_Threshold 0x2C -#define Config5 0x2F -#define Power_Up_Reset 0x3A -#define Shutdown 0x3B -#define Inverse_Product_ID 0x3F -#define LiftCutoff_Tune3 0x41 -#define Angle_Snap 0x42 -#define LiftCutoff_Tune1 0x4A -#define Motion_Burst 0x50 -#define LiftCutoff_Tune_Timeout 0x58 -#define LiftCutoff_Tune_Min_Length 0x5A -#define SROM_Load_Burst 0x62 -#define Lift_Config 0x63 -#define Raw_Data_Burst 0x64 -#define LiftCutoff_Tune2 0x65 - -#define PMW_CLOCK_SPEED 70000000 -#define MIN_CPI 100 -#define MAX_CPI 12000 -#define CPI_STEP 100 -#define CLAMP_CPI(value) value < MIN_CPI ? MIN_CPI : value > MAX_CPI ? MAX_CPI : value -#define SPI_MODE 3 -#define SPI_DIVISOR (F_CPU / PMW_CLOCK_SPEED) -#define US_BETWEEN_WRITES 180 -#define US_BETWEEN_READS 20 -#define US_BEFORE_MOTION 35 - -#define MSB1 0x80 - -extern const uint16_t pmw_firmware_length; -extern const uint8_t pmw_firmware_data[]; - -void pmw_spi_start(void){ - spi_start(SPI_SS_PIN, false, SPI_MODE, SPI_DIVISOR); -} - -void pmw_write(uint8_t reg_addr, uint8_t data){ - - pmw_spi_start(); - spi_write(reg_addr | MSB1 ); - spi_write(data); - spi_stop(); - wait_us(US_BETWEEN_WRITES); -} - -uint8_t pmw_read(uint8_t reg_addr){ - - pmw_spi_start(); - spi_write(reg_addr & 0x7f ); - uint8_t data = spi_read(); - spi_stop(); - wait_us(US_BETWEEN_READS); - - return data; -} - -void pmw_init() { - - setPinOutput(SPI_SS_PIN); - - spi_init(); - - // reboot - pmw_write(Power_Up_Reset, 0x5a); - wait_ms(50); - - // read registers and discard - pmw_read(Motion); - pmw_read(Delta_X_L); - pmw_read(Delta_X_H); - pmw_read(Delta_Y_L); - pmw_read(Delta_Y_H); - - // upload firmware - - // disable rest mode - pmw_write(Config2, 0x20); - - // enable initialisation - pmw_write(SROM_Enable, 0x1d); - - // wait a frame - wait_ms(10); - - // start SROM download - pmw_write(SROM_Enable, 0x18); - - // write the SROM file - - pmw_spi_start(); - - spi_write(SROM_Load_Burst | 0x80); - wait_us(15); - - // send all bytes of the firmware - unsigned char c; - for(int i = 0; i < pmw_firmware_length; i++){ - c = (unsigned char)pgm_read_byte(pmw_firmware_data + i); - spi_write(c); - wait_us(15); - } - - spi_stop(); - wait_us(US_BETWEEN_WRITES); - - // read id - pmw_read(SROM_ID); - - // wired mouse - pmw_write(Config2, 0x00); - - // first motion burst; write anything - pmw_write(Motion_Burst, 0xFF); - writePinLow(SPI_SS_PIN); -} - -config_pmw_t pmw_get_config(void) { - uint8_t config_1 = pmw_read(Config1); - return (config_pmw_t){ (config_1 & 0xFF) * CPI_STEP }; -} - -void pmw_set_config(config_pmw_t config) { - uint8_t config_1 = (CLAMP_CPI(config.cpi) / CPI_STEP) & 0xFF; - pmw_write(Config1, config_1); -} - -static int16_t convertDeltaToInt(uint8_t high, uint8_t low){ - - // join bytes into twos compliment - uint16_t twos_comp = (high << 8) | low; - - // convert twos comp to int - if (twos_comp & 0x8000) - return -1 * (~twos_comp + 1); - - return twos_comp; -} - -report_pmw_t pmw_get_report(void) { - - report_pmw_t report = {0, 0}; - - pmw_spi_start(); - - // start burst mode - spi_write(Motion_Burst & 0x7f); - - wait_us(US_BEFORE_MOTION); - - uint8_t motion = spi_read(); - - if(motion & 0x80) { - - // clear observation register - spi_read(); - - // delta registers - uint8_t delta_x_l = spi_read(); - uint8_t delta_x_h = spi_read(); - uint8_t delta_y_l = spi_read(); - uint8_t delta_y_h = spi_read(); - - report.x = convertDeltaToInt(delta_x_h, delta_x_l); - report.y = convertDeltaToInt(delta_y_h, delta_y_l); - } - - spi_stop(); - - return report; -} diff --git a/keyboards/oddball/pmw/pmw3360_srom_0x04.h b/keyboards/oddball/pmw/pmw3360_srom_0x04.h deleted file mode 100644 index 0dda4f1ab4..0000000000 --- a/keyboards/oddball/pmw/pmw3360_srom_0x04.h +++ /dev/null @@ -1,280 +0,0 @@ -#pragma once - -#include "progmem.h" - -const uint16_t pmw_firmware_length = 4094; - -const uint8_t pmw_firmware_data[] PROGMEM = { -0x01, 0x04, 0x8e, 0x96, 0x6e, 0x77, 0x3e, 0xfe, 0x7e, 0x5f, 0x1d, 0xb8, 0xf2, 0x66, 0x4e, -0xff, 0x5d, 0x19, 0xb0, 0xc2, 0x04, 0x69, 0x54, 0x2a, 0xd6, 0x2e, 0xbf, 0xdd, 0x19, 0xb0, -0xc3, 0xe5, 0x29, 0xb1, 0xe0, 0x23, 0xa5, 0xa9, 0xb1, 0xc1, 0x00, 0x82, 0x67, 0x4c, 0x1a, -0x97, 0x8d, 0x79, 0x51, 0x20, 0xc7, 0x06, 0x8e, 0x7c, 0x7c, 0x7a, 0x76, 0x4f, 0xfd, 0x59, -0x30, 0xe2, 0x46, 0x0e, 0x9e, 0xbe, 0xdf, 0x1d, 0x99, 0x91, 0xa0, 0xa5, 0xa1, 0xa9, 0xd0, -0x22, 0xc6, 0xef, 0x5c, 0x1b, 0x95, 0x89, 0x90, 0xa2, 0xa7, 0xcc, 0xfb, 0x55, 0x28, 0xb3, -0xe4, 0x4a, 0xf7, 0x6c, 0x3b, 0xf4, 0x6a, 0x56, 0x2e, 0xde, 0x1f, 0x9d, 0xb8, 0xd3, 0x05, -0x88, 0x92, 0xa6, 0xce, 0x1e, 0xbe, 0xdf, 0x1d, 0x99, 0xb0, 0xe2, 0x46, 0xef, 0x5c, 0x07, -0x11, 0x5d, 0x98, 0x0b, 0x9d, 0x94, 0x97, 0xee, 0x4e, 0x45, 0x33, 0x6b, 0x44, 0xc7, 0x29, -0x56, 0x27, 0x30, 0xc6, 0xa7, 0xd5, 0xf2, 0x56, 0xdf, 0xb4, 0x38, 0x62, 0xcb, 0xa0, 0xb6, -0xe3, 0x0f, 0x84, 0x06, 0x24, 0x05, 0x65, 0x6f, 0x76, 0x89, 0xb5, 0x77, 0x41, 0x27, 0x82, -0x66, 0x65, 0x82, 0xcc, 0xd5, 0xe6, 0x20, 0xd5, 0x27, 0x17, 0xc5, 0xf8, 0x03, 0x23, 0x7c, -0x5f, 0x64, 0xa5, 0x1d, 0xc1, 0xd6, 0x36, 0xcb, 0x4c, 0xd4, 0xdb, 0x66, 0xd7, 0x8b, 0xb1, -0x99, 0x7e, 0x6f, 0x4c, 0x36, 0x40, 0x06, 0xd6, 0xeb, 0xd7, 0xa2, 0xe4, 0xf4, 0x95, 0x51, -0x5a, 0x54, 0x96, 0xd5, 0x53, 0x44, 0xd7, 0x8c, 0xe0, 0xb9, 0x40, 0x68, 0xd2, 0x18, 0xe9, -0xdd, 0x9a, 0x23, 0x92, 0x48, 0xee, 0x7f, 0x43, 0xaf, 0xea, 0x77, 0x38, 0x84, 0x8c, 0x0a, -0x72, 0xaf, 0x69, 0xf8, 0xdd, 0xf1, 0x24, 0x83, 0xa3, 0xf8, 0x4a, 0xbf, 0xf5, 0x94, 0x13, -0xdb, 0xbb, 0xd8, 0xb4, 0xb3, 0xa0, 0xfb, 0x45, 0x50, 0x60, 0x30, 0x59, 0x12, 0x31, 0x71, -0xa2, 0xd3, 0x13, 0xe7, 0xfa, 0xe7, 0xce, 0x0f, 0x63, 0x15, 0x0b, 0x6b, 0x94, 0xbb, 0x37, -0x83, 0x26, 0x05, 0x9d, 0xfb, 0x46, 0x92, 0xfc, 0x0a, 0x15, 0xd1, 0x0d, 0x73, 0x92, 0xd6, -0x8c, 0x1b, 0x8c, 0xb8, 0x55, 0x8a, 0xce, 0xbd, 0xfe, 0x8e, 0xfc, 0xed, 0x09, 0x12, 0x83, -0x91, 0x82, 0x51, 0x31, 0x23, 0xfb, 0xb4, 0x0c, 0x76, 0xad, 0x7c, 0xd9, 0xb4, 0x4b, 0xb2, -0x67, 0x14, 0x09, 0x9c, 0x7f, 0x0c, 0x18, 0xba, 0x3b, 0xd6, 0x8e, 0x14, 0x2a, 0xe4, 0x1b, -0x52, 0x9f, 0x2b, 0x7d, 0xe1, 0xfb, 0x6a, 0x33, 0x02, 0xfa, 0xac, 0x5a, 0xf2, 0x3e, 0x88, -0x7e, 0xae, 0xd1, 0xf3, 0x78, 0xe8, 0x05, 0xd1, 0xe3, 0xdc, 0x21, 0xf6, 0xe1, 0x9a, 0xbd, -0x17, 0x0e, 0xd9, 0x46, 0x9b, 0x88, 0x03, 0xea, 0xf6, 0x66, 0xbe, 0x0e, 0x1b, 0x50, 0x49, -0x96, 0x40, 0x97, 0xf1, 0xf1, 0xe4, 0x80, 0xa6, 0x6e, 0xe8, 0x77, 0x34, 0xbf, 0x29, 0x40, -0x44, 0xc2, 0xff, 0x4e, 0x98, 0xd3, 0x9c, 0xa3, 0x32, 0x2b, 0x76, 0x51, 0x04, 0x09, 0xe7, -0xa9, 0xd1, 0xa6, 0x32, 0xb1, 0x23, 0x53, 0xe2, 0x47, 0xab, 0xd6, 0xf5, 0x69, 0x5c, 0x3e, -0x5f, 0xfa, 0xae, 0x45, 0x20, 0xe5, 0xd2, 0x44, 0xff, 0x39, 0x32, 0x6d, 0xfd, 0x27, 0x57, -0x5c, 0xfd, 0xf0, 0xde, 0xc1, 0xb5, 0x99, 0xe5, 0xf5, 0x1c, 0x77, 0x01, 0x75, 0xc5, 0x6d, -0x58, 0x92, 0xf2, 0xb2, 0x47, 0x00, 0x01, 0x26, 0x96, 0x7a, 0x30, 0xff, 0xb7, 0xf0, 0xef, -0x77, 0xc1, 0x8a, 0x5d, 0xdc, 0xc0, 0xd1, 0x29, 0x30, 0x1e, 0x77, 0x38, 0x7a, 0x94, 0xf1, -0xb8, 0x7a, 0x7e, 0xef, 0xa4, 0xd1, 0xac, 0x31, 0x4a, 0xf2, 0x5d, 0x64, 0x3d, 0xb2, 0xe2, -0xf0, 0x08, 0x99, 0xfc, 0x70, 0xee, 0x24, 0xa7, 0x7e, 0xee, 0x1e, 0x20, 0x69, 0x7d, 0x44, -0xbf, 0x87, 0x42, 0xdf, 0x88, 0x3b, 0x0c, 0xda, 0x42, 0xc9, 0x04, 0xf9, 0x45, 0x50, 0xfc, -0x83, 0x8f, 0x11, 0x6a, 0x72, 0xbc, 0x99, 0x95, 0xf0, 0xac, 0x3d, 0xa7, 0x3b, 0xcd, 0x1c, -0xe2, 0x88, 0x79, 0x37, 0x11, 0x5f, 0x39, 0x89, 0x95, 0x0a, 0x16, 0x84, 0x7a, 0xf6, 0x8a, -0xa4, 0x28, 0xe4, 0xed, 0x83, 0x80, 0x3b, 0xb1, 0x23, 0xa5, 0x03, 0x10, 0xf4, 0x66, 0xea, -0xbb, 0x0c, 0x0f, 0xc5, 0xec, 0x6c, 0x69, 0xc5, 0xd3, 0x24, 0xab, 0xd4, 0x2a, 0xb7, 0x99, -0x88, 0x76, 0x08, 0xa0, 0xa8, 0x95, 0x7c, 0xd8, 0x38, 0x6d, 0xcd, 0x59, 0x02, 0x51, 0x4b, -0xf1, 0xb5, 0x2b, 0x50, 0xe3, 0xb6, 0xbd, 0xd0, 0x72, 0xcf, 0x9e, 0xfd, 0x6e, 0xbb, 0x44, -0xc8, 0x24, 0x8a, 0x77, 0x18, 0x8a, 0x13, 0x06, 0xef, 0x97, 0x7d, 0xfa, 0x81, 0xf0, 0x31, -0xe6, 0xfa, 0x77, 0xed, 0x31, 0x06, 0x31, 0x5b, 0x54, 0x8a, 0x9f, 0x30, 0x68, 0xdb, 0xe2, -0x40, 0xf8, 0x4e, 0x73, 0xfa, 0xab, 0x74, 0x8b, 0x10, 0x58, 0x13, 0xdc, 0xd2, 0xe6, 0x78, -0xd1, 0x32, 0x2e, 0x8a, 0x9f, 0x2c, 0x58, 0x06, 0x48, 0x27, 0xc5, 0xa9, 0x5e, 0x81, 0x47, -0x89, 0x46, 0x21, 0x91, 0x03, 0x70, 0xa4, 0x3e, 0x88, 0x9c, 0xda, 0x33, 0x0a, 0xce, 0xbc, -0x8b, 0x8e, 0xcf, 0x9f, 0xd3, 0x71, 0x80, 0x43, 0xcf, 0x6b, 0xa9, 0x51, 0x83, 0x76, 0x30, -0x82, 0xc5, 0x6a, 0x85, 0x39, 0x11, 0x50, 0x1a, 0x82, 0xdc, 0x1e, 0x1c, 0xd5, 0x7d, 0xa9, -0x71, 0x99, 0x33, 0x47, 0x19, 0x97, 0xb3, 0x5a, 0xb1, 0xdf, 0xed, 0xa4, 0xf2, 0xe6, 0x26, -0x84, 0xa2, 0x28, 0x9a, 0x9e, 0xdf, 0xa6, 0x6a, 0xf4, 0xd6, 0xfc, 0x2e, 0x5b, 0x9d, 0x1a, -0x2a, 0x27, 0x68, 0xfb, 0xc1, 0x83, 0x21, 0x4b, 0x90, 0xe0, 0x36, 0xdd, 0x5b, 0x31, 0x42, -0x55, 0xa0, 0x13, 0xf7, 0xd0, 0x89, 0x53, 0x71, 0x99, 0x57, 0x09, 0x29, 0xc5, 0xf3, 0x21, -0xf8, 0x37, 0x2f, 0x40, 0xf3, 0xd4, 0xaf, 0x16, 0x08, 0x36, 0x02, 0xfc, 0x77, 0xc5, 0x8b, -0x04, 0x90, 0x56, 0xb9, 0xc9, 0x67, 0x9a, 0x99, 0xe8, 0x00, 0xd3, 0x86, 0xff, 0x97, 0x2d, -0x08, 0xe9, 0xb7, 0xb3, 0x91, 0xbc, 0xdf, 0x45, 0xc6, 0xed, 0x0f, 0x8c, 0x4c, 0x1e, 0xe6, -0x5b, 0x6e, 0x38, 0x30, 0xe4, 0xaa, 0xe3, 0x95, 0xde, 0xb9, 0xe4, 0x9a, 0xf5, 0xb2, 0x55, -0x9a, 0x87, 0x9b, 0xf6, 0x6a, 0xb2, 0xf2, 0x77, 0x9a, 0x31, 0xf4, 0x7a, 0x31, 0xd1, 0x1d, -0x04, 0xc0, 0x7c, 0x32, 0xa2, 0x9e, 0x9a, 0xf5, 0x62, 0xf8, 0x27, 0x8d, 0xbf, 0x51, 0xff, -0xd3, 0xdf, 0x64, 0x37, 0x3f, 0x2a, 0x6f, 0x76, 0x3a, 0x7d, 0x77, 0x06, 0x9e, 0x77, 0x7f, -0x5e, 0xeb, 0x32, 0x51, 0xf9, 0x16, 0x66, 0x9a, 0x09, 0xf3, 0xb0, 0x08, 0xa4, 0x70, 0x96, -0x46, 0x30, 0xff, 0xda, 0x4f, 0xe9, 0x1b, 0xed, 0x8d, 0xf8, 0x74, 0x1f, 0x31, 0x92, 0xb3, -0x73, 0x17, 0x36, 0xdb, 0x91, 0x30, 0xd6, 0x88, 0x55, 0x6b, 0x34, 0x77, 0x87, 0x7a, 0xe7, -0xee, 0x06, 0xc6, 0x1c, 0x8c, 0x19, 0x0c, 0x48, 0x46, 0x23, 0x5e, 0x9c, 0x07, 0x5c, 0xbf, -0xb4, 0x7e, 0xd6, 0x4f, 0x74, 0x9c, 0xe2, 0xc5, 0x50, 0x8b, 0xc5, 0x8b, 0x15, 0x90, 0x60, -0x62, 0x57, 0x29, 0xd0, 0x13, 0x43, 0xa1, 0x80, 0x88, 0x91, 0x00, 0x44, 0xc7, 0x4d, 0x19, -0x86, 0xcc, 0x2f, 0x2a, 0x75, 0x5a, 0xfc, 0xeb, 0x97, 0x2a, 0x70, 0xe3, 0x78, 0xd8, 0x91, -0xb0, 0x4f, 0x99, 0x07, 0xa3, 0x95, 0xea, 0x24, 0x21, 0xd5, 0xde, 0x51, 0x20, 0x93, 0x27, -0x0a, 0x30, 0x73, 0xa8, 0xff, 0x8a, 0x97, 0xe9, 0xa7, 0x6a, 0x8e, 0x0d, 0xe8, 0xf0, 0xdf, -0xec, 0xea, 0xb4, 0x6c, 0x1d, 0x39, 0x2a, 0x62, 0x2d, 0x3d, 0x5a, 0x8b, 0x65, 0xf8, 0x90, -0x05, 0x2e, 0x7e, 0x91, 0x2c, 0x78, 0xef, 0x8e, 0x7a, 0xc1, 0x2f, 0xac, 0x78, 0xee, 0xaf, -0x28, 0x45, 0x06, 0x4c, 0x26, 0xaf, 0x3b, 0xa2, 0xdb, 0xa3, 0x93, 0x06, 0xb5, 0x3c, 0xa5, -0xd8, 0xee, 0x8f, 0xaf, 0x25, 0xcc, 0x3f, 0x85, 0x68, 0x48, 0xa9, 0x62, 0xcc, 0x97, 0x8f, -0x7f, 0x2a, 0xea, 0xe0, 0x15, 0x0a, 0xad, 0x62, 0x07, 0xbd, 0x45, 0xf8, 0x41, 0xd8, 0x36, -0xcb, 0x4c, 0xdb, 0x6e, 0xe6, 0x3a, 0xe7, 0xda, 0x15, 0xe9, 0x29, 0x1e, 0x12, 0x10, 0xa0, -0x14, 0x2c, 0x0e, 0x3d, 0xf4, 0xbf, 0x39, 0x41, 0x92, 0x75, 0x0b, 0x25, 0x7b, 0xa3, 0xce, -0x39, 0x9c, 0x15, 0x64, 0xc8, 0xfa, 0x3d, 0xef, 0x73, 0x27, 0xfe, 0x26, 0x2e, 0xce, 0xda, -0x6e, 0xfd, 0x71, 0x8e, 0xdd, 0xfe, 0x76, 0xee, 0xdc, 0x12, 0x5c, 0x02, 0xc5, 0x3a, 0x4e, -0x4e, 0x4f, 0xbf, 0xca, 0x40, 0x15, 0xc7, 0x6e, 0x8d, 0x41, 0xf1, 0x10, 0xe0, 0x4f, 0x7e, -0x97, 0x7f, 0x1c, 0xae, 0x47, 0x8e, 0x6b, 0xb1, 0x25, 0x31, 0xb0, 0x73, 0xc7, 0x1b, 0x97, -0x79, 0xf9, 0x80, 0xd3, 0x66, 0x22, 0x30, 0x07, 0x74, 0x1e, 0xe4, 0xd0, 0x80, 0x21, 0xd6, -0xee, 0x6b, 0x6c, 0x4f, 0xbf, 0xf5, 0xb7, 0xd9, 0x09, 0x87, 0x2f, 0xa9, 0x14, 0xbe, 0x27, -0xd9, 0x72, 0x50, 0x01, 0xd4, 0x13, 0x73, 0xa6, 0xa7, 0x51, 0x02, 0x75, 0x25, 0xe1, 0xb3, -0x45, 0x34, 0x7d, 0xa8, 0x8e, 0xeb, 0xf3, 0x16, 0x49, 0xcb, 0x4f, 0x8c, 0xa1, 0xb9, 0x36, -0x85, 0x39, 0x75, 0x5d, 0x08, 0x00, 0xae, 0xeb, 0xf6, 0xea, 0xd7, 0x13, 0x3a, 0x21, 0x5a, -0x5f, 0x30, 0x84, 0x52, 0x26, 0x95, 0xc9, 0x14, 0xf2, 0x57, 0x55, 0x6b, 0xb1, 0x10, 0xc2, -0xe1, 0xbd, 0x3b, 0x51, 0xc0, 0xb7, 0x55, 0x4c, 0x71, 0x12, 0x26, 0xc7, 0x0d, 0xf9, 0x51, -0xa4, 0x38, 0x02, 0x05, 0x7f, 0xb8, 0xf1, 0x72, 0x4b, 0xbf, 0x71, 0x89, 0x14, 0xf3, 0x77, -0x38, 0xd9, 0x71, 0x24, 0xf3, 0x00, 0x11, 0xa1, 0xd8, 0xd4, 0x69, 0x27, 0x08, 0x37, 0x35, -0xc9, 0x11, 0x9d, 0x90, 0x1c, 0x0e, 0xe7, 0x1c, 0xff, 0x2d, 0x1e, 0xe8, 0x92, 0xe1, 0x18, -0x10, 0x95, 0x7c, 0xe0, 0x80, 0xf4, 0x96, 0x43, 0x21, 0xf9, 0x75, 0x21, 0x64, 0x38, 0xdd, -0x9f, 0x1e, 0x95, 0x16, 0xda, 0x56, 0x1d, 0x4f, 0x9a, 0x53, 0xb2, 0xe2, 0xe4, 0x18, 0xcb, -0x6b, 0x1a, 0x65, 0xeb, 0x56, 0xc6, 0x3b, 0xe5, 0xfe, 0xd8, 0x26, 0x3f, 0x3a, 0x84, 0x59, -0x72, 0x66, 0xa2, 0xf3, 0x75, 0xff, 0xfb, 0x60, 0xb3, 0x22, 0xad, 0x3f, 0x2d, 0x6b, 0xf9, -0xeb, 0xea, 0x05, 0x7c, 0xd8, 0x8f, 0x6d, 0x2c, 0x98, 0x9e, 0x2b, 0x93, 0xf1, 0x5e, 0x46, -0xf0, 0x87, 0x49, 0x29, 0x73, 0x68, 0xd7, 0x7f, 0xf9, 0xf0, 0xe5, 0x7d, 0xdb, 0x1d, 0x75, -0x19, 0xf3, 0xc4, 0x58, 0x9b, 0x17, 0x88, 0xa8, 0x92, 0xe0, 0xbe, 0xbd, 0x8b, 0x1d, 0x8d, -0x9f, 0x56, 0x76, 0xad, 0xaf, 0x29, 0xe2, 0xd9, 0xd5, 0x52, 0xf6, 0xb5, 0x56, 0x35, 0x57, -0x3a, 0xc8, 0xe1, 0x56, 0x43, 0x19, 0x94, 0xd3, 0x04, 0x9b, 0x6d, 0x35, 0xd8, 0x0b, 0x5f, -0x4d, 0x19, 0x8e, 0xec, 0xfa, 0x64, 0x91, 0x0a, 0x72, 0x20, 0x2b, 0xbc, 0x1a, 0x4a, 0xfe, -0x8b, 0xfd, 0xbb, 0xed, 0x1b, 0x23, 0xea, 0xad, 0x72, 0x82, 0xa1, 0x29, 0x99, 0x71, 0xbd, -0xf0, 0x95, 0xc1, 0x03, 0xdd, 0x7b, 0xc2, 0xb2, 0x3c, 0x28, 0x54, 0xd3, 0x68, 0xa4, 0x72, -0xc8, 0x66, 0x96, 0xe0, 0xd1, 0xd8, 0x7f, 0xf8, 0xd1, 0x26, 0x2b, 0xf7, 0xad, 0xba, 0x55, -0xca, 0x15, 0xb9, 0x32, 0xc3, 0xe5, 0x88, 0x97, 0x8e, 0x5c, 0xfb, 0x92, 0x25, 0x8b, 0xbf, -0xa2, 0x45, 0x55, 0x7a, 0xa7, 0x6f, 0x8b, 0x57, 0x5b, 0xcf, 0x0e, 0xcb, 0x1d, 0xfb, 0x20, -0x82, 0x77, 0xa8, 0x8c, 0xcc, 0x16, 0xce, 0x1d, 0xfa, 0xde, 0xcc, 0x0b, 0x62, 0xfe, 0xcc, -0xe1, 0xb7, 0xf0, 0xc3, 0x81, 0x64, 0x73, 0x40, 0xa0, 0xc2, 0x4d, 0x89, 0x11, 0x75, 0x33, -0x55, 0x33, 0x8d, 0xe8, 0x4a, 0xfd, 0xea, 0x6e, 0x30, 0x0b, 0xd7, 0x31, 0x2c, 0xde, 0x47, -0xe3, 0xbf, 0xf8, 0x55, 0x42, 0xe2, 0x7f, 0x59, 0xe5, 0x17, 0xef, 0x99, 0x34, 0x69, 0x91, -0xb1, 0x23, 0x8e, 0x20, 0x87, 0x2d, 0xa8, 0xfe, 0xd5, 0x8a, 0xf3, 0x84, 0x3a, 0xf0, 0x37, -0xe4, 0x09, 0x00, 0x54, 0xee, 0x67, 0x49, 0x93, 0xe4, 0x81, 0x70, 0xe3, 0x90, 0x4d, 0xef, -0xfe, 0x41, 0xb7, 0x99, 0x7b, 0xc1, 0x83, 0xba, 0x62, 0x12, 0x6f, 0x7d, 0xde, 0x6b, 0xaf, -0xda, 0x16, 0xf9, 0x55, 0x51, 0xee, 0xa6, 0x0c, 0x2b, 0x02, 0xa3, 0xfd, 0x8d, 0xfb, 0x30, -0x17, 0xe4, 0x6f, 0xdf, 0x36, 0x71, 0xc4, 0xca, 0x87, 0x25, 0x48, 0xb0, 0x47, 0xec, 0xea, -0xb4, 0xbf, 0xa5, 0x4d, 0x9b, 0x9f, 0x02, 0x93, 0xc4, 0xe3, 0xe4, 0xe8, 0x42, 0x2d, 0x68, -0x81, 0x15, 0x0a, 0xeb, 0x84, 0x5b, 0xd6, 0xa8, 0x74, 0xfb, 0x7d, 0x1d, 0xcb, 0x2c, 0xda, -0x46, 0x2a, 0x76, 0x62, 0xce, 0xbc, 0x5c, 0x9e, 0x8b, 0xe7, 0xcf, 0xbe, 0x78, 0xf5, 0x7c, -0xeb, 0xb3, 0x3a, 0x9c, 0xaa, 0x6f, 0xcc, 0x72, 0xd1, 0x59, 0xf2, 0x11, 0x23, 0xd6, 0x3f, -0x48, 0xd1, 0xb7, 0xce, 0xb0, 0xbf, 0xcb, 0xea, 0x80, 0xde, 0x57, 0xd4, 0x5e, 0x97, 0x2f, -0x75, 0xd1, 0x50, 0x8e, 0x80, 0x2c, 0x66, 0x79, 0xbf, 0x72, 0x4b, 0xbd, 0x8a, 0x81, 0x6c, -0xd3, 0xe1, 0x01, 0xdc, 0xd2, 0x15, 0x26, 0xc5, 0x36, 0xda, 0x2c, 0x1a, 0xc0, 0x27, 0x94, -0xed, 0xb7, 0x9b, 0x85, 0x0b, 0x5e, 0x80, 0x97, 0xc5, 0xec, 0x4f, 0xec, 0x88, 0x5d, 0x50, -0x07, 0x35, 0x47, 0xdc, 0x0b, 0x3b, 0x3d, 0xdd, 0x60, 0xaf, 0xa8, 0x5d, 0x81, 0x38, 0x24, -0x25, 0x5d, 0x5c, 0x15, 0xd1, 0xde, 0xb3, 0xab, 0xec, 0x05, 0x69, 0xef, 0x83, 0xed, 0x57, -0x54, 0xb8, 0x64, 0x64, 0x11, 0x16, 0x32, 0x69, 0xda, 0x9f, 0x2d, 0x7f, 0x36, 0xbb, 0x44, -0x5a, 0x34, 0xe8, 0x7f, 0xbf, 0x03, 0xeb, 0x00, 0x7f, 0x59, 0x68, 0x22, 0x79, 0xcf, 0x73, -0x6c, 0x2c, 0x29, 0xa7, 0xa1, 0x5f, 0x38, 0xa1, 0x1d, 0xf0, 0x20, 0x53, 0xe0, 0x1a, 0x63, -0x14, 0x58, 0x71, 0x10, 0xaa, 0x08, 0x0c, 0x3e, 0x16, 0x1a, 0x60, 0x22, 0x82, 0x7f, 0xba, -0xa4, 0x43, 0xa0, 0xd0, 0xac, 0x1b, 0xd5, 0x6b, 0x64, 0xb5, 0x14, 0x93, 0x31, 0x9e, 0x53, -0x50, 0xd0, 0x57, 0x66, 0xee, 0x5a, 0x4f, 0xfb, 0x03, 0x2a, 0x69, 0x58, 0x76, 0xf1, 0x83, -0xf7, 0x4e, 0xba, 0x8c, 0x42, 0x06, 0x60, 0x5d, 0x6d, 0xce, 0x60, 0x88, 0xae, 0xa4, 0xc3, -0xf1, 0x03, 0xa5, 0x4b, 0x98, 0xa1, 0xff, 0x67, 0xe1, 0xac, 0xa2, 0xb8, 0x62, 0xd7, 0x6f, -0xa0, 0x31, 0xb4, 0xd2, 0x77, 0xaf, 0x21, 0x10, 0x06, 0xc6, 0x9a, 0xff, 0x1d, 0x09, 0x17, -0x0e, 0x5f, 0xf1, 0xaa, 0x54, 0x34, 0x4b, 0x45, 0x8a, 0x87, 0x63, 0xa6, 0xdc, 0xf9, 0x24, -0x30, 0x67, 0xc6, 0xb2, 0xd6, 0x61, 0x33, 0x69, 0xee, 0x50, 0x61, 0x57, 0x28, 0xe7, 0x7e, -0xee, 0xec, 0x3a, 0x5a, 0x73, 0x4e, 0xa8, 0x8d, 0xe4, 0x18, 0xea, 0xec, 0x41, 0x64, 0xc8, -0xe2, 0xe8, 0x66, 0xb6, 0x2d, 0xb6, 0xfb, 0x6a, 0x6c, 0x16, 0xb3, 0xdd, 0x46, 0x43, 0xb9, -0x73, 0x00, 0x6a, 0x71, 0xed, 0x4e, 0x9d, 0x25, 0x1a, 0xc3, 0x3c, 0x4a, 0x95, 0x15, 0x99, -0x35, 0x81, 0x14, 0x02, 0xd6, 0x98, 0x9b, 0xec, 0xd8, 0x23, 0x3b, 0x84, 0x29, 0xaf, 0x0c, -0x99, 0x83, 0xa6, 0x9a, 0x34, 0x4f, 0xfa, 0xe8, 0xd0, 0x3c, 0x4b, 0xd0, 0xfb, 0xb6, 0x68, -0xb8, 0x9e, 0x8f, 0xcd, 0xf7, 0x60, 0x2d, 0x7a, 0x22, 0xe5, 0x7d, 0xab, 0x65, 0x1b, 0x95, -0xa7, 0xa8, 0x7f, 0xb6, 0x77, 0x47, 0x7b, 0x5f, 0x8b, 0x12, 0x72, 0xd0, 0xd4, 0x91, 0xef, -0xde, 0x19, 0x50, 0x3c, 0xa7, 0x8b, 0xc4, 0xa9, 0xb3, 0x23, 0xcb, 0x76, 0xe6, 0x81, 0xf0, -0xc1, 0x04, 0x8f, 0xa3, 0xb8, 0x54, 0x5b, 0x97, 0xac, 0x19, 0xff, 0x3f, 0x55, 0x27, 0x2f, -0xe0, 0x1d, 0x42, 0x9b, 0x57, 0xfc, 0x4b, 0x4e, 0x0f, 0xce, 0x98, 0xa9, 0x43, 0x57, 0x03, -0xbd, 0xe7, 0xc8, 0x94, 0xdf, 0x6e, 0x36, 0x73, 0x32, 0xb4, 0xef, 0x2e, 0x85, 0x7a, 0x6e, -0xfc, 0x6c, 0x18, 0x82, 0x75, 0x35, 0x90, 0x07, 0xf3, 0xe4, 0x9f, 0x3e, 0xdc, 0x68, 0xf3, -0xb5, 0xf3, 0x19, 0x80, 0x92, 0x06, 0x99, 0xa2, 0xe8, 0x6f, 0xff, 0x2e, 0x7f, 0xae, 0x42, -0xa4, 0x5f, 0xfb, 0xd4, 0x0e, 0x81, 0x2b, 0xc3, 0x04, 0xff, 0x2b, 0xb3, 0x74, 0x4e, 0x36, -0x5b, 0x9c, 0x15, 0x00, 0xc6, 0x47, 0x2b, 0xe8, 0x8b, 0x3d, 0xf1, 0x9c, 0x03, 0x9a, 0x58, -0x7f, 0x9b, 0x9c, 0xbf, 0x85, 0x49, 0x79, 0x35, 0x2e, 0x56, 0x7b, 0x41, 0x14, 0x39, 0x47, -0x83, 0x26, 0xaa, 0x07, 0x89, 0x98, 0x11, 0x1b, 0x86, 0xe7, 0x73, 0x7a, 0xd8, 0x7d, 0x78, -0x61, 0x53, 0xe9, 0x79, 0xf5, 0x36, 0x8d, 0x44, 0x92, 0x84, 0xf9, 0x13, 0x50, 0x58, 0x3b, -0xa4, 0x6a, 0x36, 0x65, 0x49, 0x8e, 0x3c, 0x0e, 0xf1, 0x6f, 0xd2, 0x84, 0xc4, 0x7e, 0x8e, -0x3f, 0x39, 0xae, 0x7c, 0x84, 0xf1, 0x63, 0x37, 0x8e, 0x3c, 0xcc, 0x3e, 0x44, 0x81, 0x45, -0xf1, 0x4b, 0xb9, 0xed, 0x6b, 0x36, 0x5d, 0xbb, 0x20, 0x60, 0x1a, 0x0f, 0xa3, 0xaa, 0x55, -0x77, 0x3a, 0xa9, 0xae, 0x37, 0x4d, 0xba, 0xb8, 0x86, 0x6b, 0xbc, 0x08, 0x50, 0xf6, 0xcc, -0xa4, 0xbd, 0x1d, 0x40, 0x72, 0xa5, 0x86, 0xfa, 0xe2, 0x10, 0xae, 0x3d, 0x58, 0x4b, 0x97, -0xf3, 0x43, 0x74, 0xa9, 0x9e, 0xeb, 0x21, 0xb7, 0x01, 0xa4, 0x86, 0x93, 0x97, 0xee, 0x2f, -0x4f, 0x3b, 0x86, 0xa1, 0x41, 0x6f, 0x41, 0x26, 0x90, 0x78, 0x5c, 0x7f, 0x30, 0x38, 0x4b, -0x3f, 0xaa, 0xec, 0xed, 0x5c, 0x6f, 0x0e, 0xad, 0x43, 0x87, 0xfd, 0x93, 0x35, 0xe6, 0x01, -0xef, 0x41, 0x26, 0x90, 0x99, 0x9e, 0xfb, 0x19, 0x5b, 0xad, 0xd2, 0x91, 0x8a, 0xe0, 0x46, -0xaf, 0x65, 0xfa, 0x4f, 0x84, 0xc1, 0xa1, 0x2d, 0xcf, 0x45, 0x8b, 0xd3, 0x85, 0x50, 0x55, -0x7c, 0xf9, 0x67, 0x88, 0xd4, 0x4e, 0xe9, 0xd7, 0x6b, 0x61, 0x54, 0xa1, 0xa4, 0xa6, 0xa2, -0xc2, 0xbf, 0x30, 0x9c, 0x40, 0x9f, 0x5f, 0xd7, 0x69, 0x2b, 0x24, 0x82, 0x5e, 0xd9, 0xd6, -0xa7, 0x12, 0x54, 0x1a, 0xf7, 0x55, 0x9f, 0x76, 0x50, 0xa9, 0x95, 0x84, 0xe6, 0x6b, 0x6d, -0xb5, 0x96, 0x54, 0xd6, 0xcd, 0xb3, 0xa1, 0x9b, 0x46, 0xa7, 0x94, 0x4d, 0xc4, 0x94, 0xb4, -0x98, 0xe3, 0xe1, 0xe2, 0x34, 0xd5, 0x33, 0x16, 0x07, 0x54, 0xcd, 0xb7, 0x77, 0x53, 0xdb, -0x4f, 0x4d, 0x46, 0x9d, 0xe9, 0xd4, 0x9c, 0x8a, 0x36, 0xb6, 0xb8, 0x38, 0x26, 0x6c, 0x0e, -0xff, 0x9c, 0x1b, 0x43, 0x8b, 0x80, 0xcc, 0xb9, 0x3d, 0xda, 0xc7, 0xf1, 0x8a, 0xf2, 0x6d, -0xb8, 0xd7, 0x74, 0x2f, 0x7e, 0x1e, 0xb7, 0xd3, 0x4a, 0xb4, 0xac, 0xfc, 0x79, 0x48, 0x6c, -0xbc, 0x96, 0xb6, 0x94, 0x46, 0x57, 0x2d, 0xb0, 0xa3, 0xfc, 0x1e, 0xb9, 0x52, 0x60, 0x85, -0x2d, 0x41, 0xd0, 0x43, 0x01, 0x1e, 0x1c, 0xd5, 0x7d, 0xfc, 0xf3, 0x96, 0x0d, 0xc7, 0xcb, -0x2a, 0x29, 0x9a, 0x93, 0xdd, 0x88, 0x2d, 0x37, 0x5d, 0xaa, 0xfb, 0x49, 0x68, 0xa0, 0x9c, -0x50, 0x86, 0x7f, 0x68, 0x56, 0x57, 0xf9, 0x79, 0x18, 0x39, 0xd4, 0xe0, 0x01, 0x84, 0x33, -0x61, 0xca, 0xa5, 0xd2, 0xd6, 0xe4, 0xc9, 0x8a, 0x4a, 0x23, 0x44, 0x4e, 0xbc, 0xf0, 0xdc, -0x24, 0xa1, 0xa0, 0xc4, 0xe2, 0x07, 0x3c, 0x10, 0xc4, 0xb5, 0x25, 0x4b, 0x65, 0x63, 0xf4, -0x80, 0xe7, 0xcf, 0x61, 0xb1, 0x71, 0x82, 0x21, 0x87, 0x2c, 0xf5, 0x91, 0x00, 0x32, 0x0c, -0xec, 0xa9, 0xb5, 0x9a, 0x74, 0x85, 0xe3, 0x36, 0x8f, 0x76, 0x4f, 0x9c, 0x6d, 0xce, 0xbc, -0xad, 0x0a, 0x4b, 0xed, 0x76, 0x04, 0xcb, 0xc3, 0xb9, 0x33, 0x9e, 0x01, 0x93, 0x96, 0x69, -0x7d, 0xc5, 0xa2, 0x45, 0x79, 0x9b, 0x04, 0x5c, 0x84, 0x09, 0xed, 0x88, 0x43, 0xc7, 0xab, -0x93, 0x14, 0x26, 0xa1, 0x40, 0xb5, 0xce, 0x4e, 0xbf, 0x2a, 0x42, 0x85, 0x3e, 0x2c, 0x3b, -0x54, 0xe8, 0x12, 0x1f, 0x0e, 0x97, 0x59, 0xb2, 0x27, 0x89, 0xfa, 0xf2, 0xdf, 0x8e, 0x68, -0x59, 0xdc, 0x06, 0xbc, 0xb6, 0x85, 0x0d, 0x06, 0x22, 0xec, 0xb1, 0xcb, 0xe5, 0x04, 0xe6, -0x3d, 0xb3, 0xb0, 0x41, 0x73, 0x08, 0x3f, 0x3c, 0x58, 0x86, 0x63, 0xeb, 0x50, 0xee, 0x1d, -0x2c, 0x37, 0x74, 0xa9, 0xd3, 0x18, 0xa3, 0x47, 0x6e, 0x93, 0x54, 0xad, 0x0a, 0x5d, 0xb8, -0x2a, 0x55, 0x5d, 0x78, 0xf6, 0xee, 0xbe, 0x8e, 0x3c, 0x76, 0x69, 0xb9, 0x40, 0xc2, 0x34, -0xec, 0x2a, 0xb9, 0xed, 0x7e, 0x20, 0xe4, 0x8d, 0x00, 0x38, 0xc7, 0xe6, 0x8f, 0x44, 0xa8, -0x86, 0xce, 0xeb, 0x2a, 0xe9, 0x90, 0xf1, 0x4c, 0xdf, 0x32, 0xfb, 0x73, 0x1b, 0x6d, 0x92, -0x1e, 0x95, 0xfe, 0xb4, 0xdb, 0x65, 0xdf, 0x4d, 0x23, 0x54, 0x89, 0x48, 0xbf, 0x4a, 0x2e, -0x70, 0xd6, 0xd7, 0x62, 0xb4, 0x33, 0x29, 0xb1, 0x3a, 0x33, 0x4c, 0x23, 0x6d, 0xa6, 0x76, -0xa5, 0x21, 0x63, 0x48, 0xe6, 0x90, 0x5d, 0xed, 0x90, 0x95, 0x0b, 0x7a, 0x84, 0xbe, 0xb8, -0x0d, 0x5e, 0x63, 0x0c, 0x62, 0x26, 0x4c, 0x14, 0x5a, 0xb3, 0xac, 0x23, 0xa4, 0x74, 0xa7, -0x6f, 0x33, 0x30, 0x05, 0x60, 0x01, 0x42, 0xa0, 0x28, 0xb7, 0xee, 0x19, 0x38, 0xf1, 0x64, -0x80, 0x82, 0x43, 0xe1, 0x41, 0x27, 0x1f, 0x1f, 0x90, 0x54, 0x7a, 0xd5, 0x23, 0x2e, 0xd1, -0x3d, 0xcb, 0x28, 0xba, 0x58, 0x7f, 0xdc, 0x7c, 0x91, 0x24, 0xe9, 0x28, 0x51, 0x83, 0x6e, -0xc5, 0x56, 0x21, 0x42, 0xed, 0xa0, 0x56, 0x22, 0xa1, 0x40, 0x80, 0x6b, 0xa8, 0xf7, 0x94, -0xca, 0x13, 0x6b, 0x0c, 0x39, 0xd9, 0xfd, 0xe9, 0xf3, 0x6f, 0xa6, 0x9e, 0xfc, 0x70, 0x8a, -0xb3, 0xbc, 0x59, 0x3c, 0x1e, 0x1d, 0x6c, 0xf9, 0x7c, 0xaf, 0xf9, 0x88, 0x71, 0x95, 0xeb, -0x57, 0x00, 0xbd, 0x9f, 0x8c, 0x4f, 0xe1, 0x24, 0x83, 0xc5, 0x22, 0xea, 0xfd, 0xd3, 0x0c, -0xe2, 0x17, 0x18, 0x7c, 0x6a, 0x4c, 0xde, 0x77, 0xb4, 0x53, 0x9b, 0x4c, 0x81, 0xcd, 0x23, -0x60, 0xaa, 0x0e, 0x25, 0x73, 0x9c, 0x02, 0x79, 0x32, 0x30, 0xdf, 0x74, 0xdf, 0x75, 0x19, -0xf4, 0xa5, 0x14, 0x5c, 0xf7, 0x7a, 0xa8, 0xa5, 0x91, 0x84, 0x7c, 0x60, 0x03, 0x06, 0x3b, -0xcd, 0x50, 0xb6, 0x27, 0x9c, 0xfe, 0xb1, 0xdd, 0xcc, 0xd3, 0xb0, 0x59, 0x24, 0xb2, 0xca, -0xe2, 0x1c, 0x81, 0x22, 0x9d, 0x07, 0x8f, 0x8e, 0xb9, 0xbe, 0x4e, 0xfa, 0xfc, 0x39, 0x65, -0xba, 0xbf, 0x9d, 0x12, 0x37, 0x5e, 0x97, 0x7e, 0xf3, 0x89, 0xf5, 0x5d, 0xf5, 0xe3, 0x09, -0x8c, 0x62, 0xb5, 0x20, 0x9d, 0x0c, 0x53, 0x8a, 0x68, 0x1b, 0xd2, 0x8f, 0x75, 0x17, 0x5d, -0xd4, 0xe5, 0xda, 0x75, 0x62, 0x19, 0x14, 0x6a, 0x26, 0x2d, 0xeb, 0xf8, 0xaf, 0x37, 0xf0, -0x6c, 0xa4, 0x55, 0xb1, 0xbc, 0xe2, 0x33, 0xc0, 0x9a, 0xca, 0xb0, 0x11, 0x49, 0x4f, 0x68, -0x9b, 0x3b, 0x6b, 0x3c, 0xcc, 0x13, 0xf6, 0xc7, 0x85, 0x61, 0x68, 0x42, 0xae, 0xbb, 0xdd, -0xcd, 0x45, 0x16, 0x29, 0x1d, 0xea, 0xdb, 0xc8, 0x03, 0x94, 0x3c, 0xee, 0x4f, 0x82, 0x11, -0xc3, 0xec, 0x28, 0xbd, 0x97, 0x05, 0x99, 0xde, 0xd7, 0xbb, 0x5e, 0x22, 0x1f, 0xd4, 0xeb, -0x64, 0xd9, 0x92, 0xd9, 0x85, 0xb7, 0x6a, 0x05, 0x6a, 0xe4, 0x24, 0x41, 0xf1, 0xcd, 0xf0, -0xd8, 0x3f, 0xf8, 0x9e, 0x0e, 0xcd, 0x0b, 0x7a, 0x70, 0x6b, 0x5a, 0x75, 0x0a, 0x6a, 0x33, -0x88, 0xec, 0x17, 0x75, 0x08, 0x70, 0x10, 0x2f, 0x24, 0xcf, 0xc4, 0xe9, 0x42, 0x00, 0x61, -0x94, 0xca, 0x1f, 0x3a, 0x76, 0x06, 0xfa, 0xd2, 0x48, 0x81, 0xf0, 0x77, 0x60, 0x03, 0x45, -0xd9, 0x61, 0xf4, 0xa4, 0x6f, 0x3d, 0xd9, 0x30, 0xc3, 0x04, 0x6b, 0x54, 0x2a, 0xb7, 0xec, -0x3b, 0xf4, 0x4b, 0xf5, 0x68, 0x52, 0x26, 0xce, 0xff, 0x5d, 0x19, 0x91, 0xa0, 0xa3, 0xa5, -0xa9, 0xb1, 0xe0, 0x23, 0xc4, 0x0a, 0x77, 0x4d, 0xf9, 0x51, 0x20, 0xa3, 0xa5, 0xa9, 0xb1, -0xc1, 0x00, 0x82, 0x86, 0x8e, 0x7f, 0x5d, 0x19, 0x91, 0xa0, 0xa3, 0xc4, 0xeb, 0x54, 0x0b, -0x75, 0x68, 0x52, 0x07, 0x8c, 0x9a, 0x97, 0x8d, 0x79, 0x70, 0x62, 0x46, 0xef, 0x5c, 0x1b, -0x95, 0x89, 0x71, 0x41, 0xe1, 0x21, 0xa1, 0xa1, 0xa1, 0xc0, 0x02, 0x67, 0x4c, 0x1a, 0xb6, -0xcf, 0xfd, 0x78, 0x53, 0x24, 0xab, 0xb5, 0xc9, 0xf1, 0x60, 0x23, 0xa5, 0xc8, 0x12, 0x87, -0x6d, 0x58, 0x13, 0x85, 0x88, 0x92, 0x87, 0x6d, 0x58, 0x32, 0xc7, 0x0c, 0x9a, 0x97, 0xac, -0xda, 0x36, 0xee, 0x5e, 0x3e, 0xdf, 0x1d, 0xb8, 0xf2, 0x66, 0x2f, 0xbd, 0xf8, 0x72, 0x47, -0xed, 0x58, 0x13, 0x85, 0x88, 0x92, 0x87, 0x8c, 0x7b, 0x55, 0x09, 0x90, 0xa2, 0xc6, 0xef, -0x3d, 0xf8, 0x53, 0x24, 0xab, 0xd4, 0x2a, 0xb7, 0xec, 0x5a, 0x36, 0xee, 0x5e, 0x3e, 0xdf, -0x3c, 0xfa, 0x76, 0x4f, 0xfd, 0x59, 0x30, 0xe2, 0x46, 0xef, 0x3d, 0xf8, 0x53, 0x05, 0x69, -0x31, 0xc1, 0x00, 0x82, 0x86, 0x8e, 0x7f, 0x5d, 0x19, 0xb0, 0xe2, 0x27, 0xcc, 0xfb, 0x74, -0x4b, 0x14, 0x8b, 0x94, 0x8b, 0x75, 0x68, 0x33, 0xc5, 0x08, 0x92, 0x87, 0x8c, 0x9a, 0xb6, -0xcf, 0x1c, 0xba, 0xd7, 0x0d, 0x98, 0xb2, 0xe6, 0x2f, 0xdc, 0x1b, 0x95, 0x89, 0x71, 0x60, -0x23, 0xc4, 0x0a, 0x96, 0x8f, 0x9c, 0xba, 0xf6, 0x6e, 0x3f, 0xfc, 0x5b, 0x15, 0xa8, 0xd2, -0x26, 0xaf, 0xbd, 0xf8, 0x72, 0x66, 0x2f, 0xdc, 0x1b, 0xb4, 0xcb, 0x14, 0x8b, 0x94, 0xaa, -0xb7, 0xcd, 0xf9, 0x51, 0x01, 0x80, 0x82, 0x86, 0x6f, 0x3d, 0xd9, 0x30, 0xe2, 0x27, 0xcc, -0xfb, 0x74, 0x4b, 0x14, 0xaa, 0xb7, 0xcd, 0xf9, 0x70, 0x43, 0x04, 0x6b, 0x35, 0xc9, 0xf1, -0x60, 0x23, 0xa5, 0xc8, 0xf3, 0x45, 0x08, 0x92, 0x87, 0x6d, 0x58, 0x32, 0xe6, 0x2f, 0xbd, -0xf8, 0x72, 0x66, 0x4e, 0x1e, 0xbe, 0xfe, 0x7e, 0x7e, 0x7e, 0x5f, 0x1d, 0x99, 0x91, 0xa0, -0xa3, 0xc4, 0x0a, 0x77, 0x4d, 0x18, 0x93, 0xa4, 0xab, 0xd4, 0x0b, 0x75, 0x49, 0x10, 0xa2, -0xc6, 0xef, 0x3d, 0xf8, 0x53, 0x24, 0xab, 0xb5, 0xe8, 0x33, 0xe4, 0x4a, 0x16, 0xae, 0xde, -0x1f, 0xbc, 0xdb, 0x15, 0xa8, 0xb3, 0xc5, 0x08, 0x73, 0x45, 0xe9, 0x31, 0xc1, 0xe1, 0x21, -0xa1, 0xa1, 0xa1, 0xc0, 0x02, 0x86, 0x6f, 0x5c, 0x3a, 0xd7, 0x0d, 0x98, 0x93, 0xa4, 0xca, -0x16, 0xae, 0xde, 0x1f, 0x9d, 0x99, 0xb0, 0xe2, 0x46, 0xef, 0x3d, 0xf8, 0x72, 0x47, 0x0c, -0x9a, 0xb6, 0xcf, 0xfd, 0x59, 0x11, 0xa0, 0xa3, 0xa5, 0xc8, 0xf3, 0x45, 0x08, 0x92, 0x87, -0x6d, 0x39, 0xf0, 0x43, 0x04, 0x8a, 0x96, 0xae, 0xde, 0x3e, 0xdf, 0x1d, 0x99, 0x91, 0xa0, -0xc2, 0x06, 0x6f, 0x3d, 0xf8, 0x72, 0x47, 0x0c, 0x9a, 0x97, 0x8d, 0x98, 0x93, 0x85, 0x88, -0x73, 0x45, 0xe9, 0x31, 0xe0, 0x23, 0xa5, 0xa9, 0xd0, 0x03, 0x84, 0x8a, 0x96, 0xae, 0xde, -0x1f, 0xbc, 0xdb, 0x15, 0xa8, 0xd2, 0x26, 0xce, 0xff, 0x5d, 0x19, 0x91, 0x81, 0x80, 0x82, -0x67, 0x2d, 0xd8, 0x13, 0xa4, 0xab, 0xd4, 0x0b, 0x94, 0xaa, 0xb7, 0xcd, 0xf9, 0x51, 0x20, -0xa3, 0xa5, 0xc8, 0xf3, 0x45, 0xe9, 0x50, 0x22, 0xc6, 0xef, 0x5c, 0x3a, 0xd7, 0x0d, 0x98, -0x93, 0x85, 0x88, 0x73, 0x64, 0x4a, 0xf7, 0x4d, 0xf9, 0x51, 0x20, 0xa3, 0xc4, 0x0a, 0x96, -0xae, 0xde, 0x3e, 0xfe, 0x7e, 0x7e, 0x7e, 0x5f, 0x3c, 0xfa, 0x76, 0x4f, 0xfd, 0x78, 0x72, -0x66, 0x2f, 0xbd, 0xd9, 0x30, 0xc3, 0xe5, 0x48, 0x12, 0x87, 0x8c, 0x7b, 0x55, 0x28, 0xd2, -0x07, 0x8c, 0x9a, 0x97, 0xac, 0xda, 0x17, 0x8d, 0x79, 0x51, 0x20, 0xa3, 0xc4, 0xeb, 0x54, -0x0b, 0x94, 0x8b, 0x94, 0xaa, 0xd6, 0x2e, 0xbf, 0xfc, 0x5b, 0x15, 0xa8, 0xd2, 0x26, 0xaf, -0xdc, 0x1b, 0xb4, 0xea, 0x37, 0xec, 0x3b, 0xf4, 0x6a, 0x37, 0xcd, 0x18, 0x93, 0x85, 0x69, -0x31, 0xc1, 0xe1, 0x40, 0xe3, 0x25, 0xc8, 0x12, 0x87, 0x8c, 0x9a, 0xb6, 0xcf, 0xfd, 0x59, -0x11, 0xa0, 0xc2, 0x06, 0x8e, 0x7f, 0x5d, 0x38, 0xf2, 0x47, 0x0c, 0x7b, 0x74, 0x6a, 0x37, -0xec, 0x5a, 0x36, 0xee, 0x3f, 0xfc, 0x7a, 0x76, 0x4f, 0x1c, 0x9b, 0x95, 0x89, 0x71, 0x41, -0x00, 0x63, 0x44, 0xeb, 0x54, 0x2a, 0xd6, 0x0f, 0x9c, 0xba, 0xd7, 0x0d, 0x98, 0x93, 0x85, -0x69, 0x31, 0xc1, 0x00, 0x82, 0x86, 0x8e, 0x9e, 0xbe, 0xdf, 0x3c, 0xfa, 0x57, 0x2c, 0xda, -0x36, 0xee, 0x3f, 0xfc, 0x5b, 0x15, 0x89, 0x71, 0x41, 0x00, 0x82, 0x86, 0x8e, 0x7f, 0x5d, -0x38, 0xf2, 0x47, 0xed, 0x58, 0x13, 0xa4, 0xca, 0xf7, 0x4d, 0xf9, 0x51, 0x01, 0x80, 0x63, -0x44, 0xeb, 0x54, 0x2a, 0xd6, 0x2e, 0xbf, 0xdd, 0x19, 0x91, 0xa0, 0xa3, 0xa5, 0xa9, 0xb1, -0xe0, 0x42, 0x06, 0x8e, 0x7f, 0x5d, 0x19, 0x91, 0xa0, 0xa3, 0xc4, 0x0a, 0x96, 0x8f, 0x7d, -0x78, 0x72, 0x47, 0x0c, 0x7b, 0x74, 0x6a, 0x56, 0x2e, 0xde, 0x1f, 0xbc, 0xfa, 0x57, 0x0d, -0x79, 0x51, 0x01, 0x61, 0x21, 0xa1, 0xc0, 0xe3, 0x25, 0xa9, 0xb1, 0xc1, 0xe1, 0x40, 0x02, -0x67, 0x4c, 0x1a, 0x97, 0x8d, 0x98, 0x93, 0xa4, 0xab, 0xd4, 0x2a, 0xd6, 0x0f, 0x9c, 0x9b, -0xb4, 0xcb, 0x14, 0xaa, 0xb7, 0xcd, 0xf9, 0x51, 0x20, 0xa3, 0xc4, 0xeb, 0x35, 0xc9, 0xf1, -0x60, 0x42, 0x06, 0x8e, 0x7f, 0x7c, 0x7a, 0x76, 0x6e, 0x3f, 0xfc, 0x7a, 0x76, 0x6e, 0x5e, -0x3e, 0xfe, 0x7e, 0x5f, 0x3c, 0xdb, 0x15, 0x89, 0x71, 0x41, 0xe1, 0x21, 0xc0, 0xe3, 0x44, -0xeb, 0x54, 0x2a, 0xb7, 0xcd, 0xf9, 0x70, 0x62, 0x27, 0xad, 0xd8, 0x32, 0xc7, 0x0c, 0x7b, -0x74, 0x4b, 0x14, 0xaa, 0xb7, 0xec, 0x3b, 0xd5, 0x28, 0xd2, 0x07, 0x6d, 0x39, 0xd1, 0x20, -0xc2, 0xe7, 0x4c, 0x1a, 0x97, 0x8d, 0x98, 0xb2, 0xc7, 0x0c, 0x59, 0x28, 0xf3, 0x9b }; diff --git a/keyboards/oddball/rules.mk b/keyboards/oddball/rules.mk index f1e7d48940..d675ebcf2b 100644 --- a/keyboards/oddball/rules.mk +++ b/keyboards/oddball/rules.mk @@ -21,7 +21,3 @@ SPLIT_KEYBOARD = yes POINTING_DEVICE_ENABLE = yes DEFAULT_FOLDER = oddball/v1 - -SRC += spi_master.c -SRC += drivers/sensors/adns9800.c -SRC += pmw/pmw.c diff --git a/keyboards/ploopyco/mouse/mouse.c b/keyboards/ploopyco/mouse/mouse.c index 0bf96a20f7..1b00ef3b71 100644 --- a/keyboards/ploopyco/mouse/mouse.c +++ b/keyboards/ploopyco/mouse/mouse.c @@ -31,7 +31,8 @@ # define OPT_SCALE 1 // Multiplier for wheel #endif #ifndef PLOOPY_DPI_OPTIONS -# define PLOOPY_DPI_OPTIONS { 1200, 1600, 2400 } +# define PLOOPY_DPI_OPTIONS \ + { 1200, 1600, 2400 } # ifndef PLOOPY_DPI_DEFAULT # define PLOOPY_DPI_DEFAULT 1 # endif @@ -40,10 +41,10 @@ # define PLOOPY_DPI_DEFAULT 0 #endif #ifndef PLOOPY_DRAGSCROLL_DPI -# define PLOOPY_DRAGSCROLL_DPI 100 // Fixed-DPI Drag Scroll +# define PLOOPY_DRAGSCROLL_DPI 100 // Fixed-DPI Drag Scroll #endif #ifndef PLOOPY_DRAGSCROLL_MULTIPLIER -# define PLOOPY_DRAGSCROLL_MULTIPLIER 0.75 // Variable-DPI Drag Scroll +# define PLOOPY_DRAGSCROLL_MULTIPLIER 0.75 // Variable-DPI Drag Scroll #endif keyboard_config_t keyboard_config; @@ -65,13 +66,7 @@ uint8_t OptLowPin = OPT_ENC1; bool debug_encoder = false; bool is_drag_scroll = false; -__attribute__((weak)) void process_wheel_user(report_mouse_t* mouse_report, int16_t h, int16_t v) { - mouse_report->h = h; - mouse_report->v = v; -} - -__attribute__((weak)) void process_wheel(report_mouse_t* mouse_report) { - // TODO: Replace this with interrupt driven code, polling is S L O W +void process_wheel(report_mouse_t* mouse_report) { // Lovingly ripped from the Ploopy Source // If the mouse wheel was just released, do not scroll. @@ -99,56 +94,25 @@ __attribute__((weak)) void process_wheel(report_mouse_t* mouse_report) { int dir = opt_encoder_handler(p1, p2); if (dir == 0) return; - process_wheel_user(mouse_report, mouse_report->h, (int)(mouse_report->v + (dir * OPT_SCALE))); -} - -__attribute__((weak)) void process_mouse_user(report_mouse_t* mouse_report, int16_t x, int16_t y) { - mouse_report->x = x; - mouse_report->y = y; + mouse_report->v = (int8_t)(dir * OPT_SCALE); } -__attribute__((weak)) void process_mouse(report_mouse_t* mouse_report) { - report_pmw_t data = pmw_read_burst(); - if (data.isOnSurface && data.isMotion) { - // Reset timer if stopped moving - if (!data.isMotion) { - if (MotionStart != 0) MotionStart = 0; - return; - } - - // Set timer if new motion - if ((MotionStart == 0) && data.isMotion) { - if (debug_mouse) dprintf("Starting motion.\n"); - MotionStart = timer_read(); - } +__attribute__((weak)) report_mouse_t pointing_device_task_kb(report_mouse_t mouse_report) { + process_wheel(&mouse_report); - if (debug_mouse) { - dprintf("Delt] d: %d t: %u\n", abs(data.dx) + abs(data.dy), MotionStart); - } - if (debug_mouse) { - dprintf("Pre ] X: %d, Y: %d\n", data.dx, data.dy); - } -#if defined(PROFILE_LINEAR) - float scale = float(timer_elaspsed(MotionStart)) / 1000.0; - data.dx *= scale; - data.dy *= scale; -#elif defined(PROFILE_INVERSE) - // TODO + if (is_drag_scroll) { + mouse_report.h = mouse_report.x; +#ifdef PLOOPY_DRAGSCROLL_INVERT + // Invert vertical scroll direction + mouse_report.v = -mouse_report.y; #else - // no post processing + mouse_report.v = mouse_report.y; #endif - // apply multiplier - // data.dx *= mouse_multiplier; - // data.dy *= mouse_multiplier; - - // Wrap to HID size - data.dx = constrain(data.dx, -127, 127); - data.dy = constrain(data.dy, -127, 127); - if (debug_mouse) dprintf("Cons] X: %d, Y: %d\n", data.dx, data.dy); - // dprintf("Elapsed:%u, X: %f Y: %\n", i, pgm_read_byte(firmware_data+i)); - - process_mouse_user(mouse_report, data.dx, data.dy); + mouse_report.x = 0; + mouse_report.y = 0; } + + return pointing_device_task_user(mouse_report); } bool process_record_kb(uint16_t keycode, keyrecord_t* record) { @@ -169,7 +133,7 @@ bool process_record_kb(uint16_t keycode, keyrecord_t* record) { if (keycode == DPI_CONFIG && record->event.pressed) { keyboard_config.dpi_config = (keyboard_config.dpi_config + 1) % DPI_OPTION_SIZE; eeconfig_update_kb(keyboard_config.raw); - pmw_set_cpi(dpi_array[keyboard_config.dpi_config]); + pointing_device_set_cpi(dpi_array[keyboard_config.dpi_config]); } if (keycode == DRAG_SCROLL) { @@ -180,9 +144,9 @@ bool process_record_kb(uint16_t keycode, keyrecord_t* record) { is_drag_scroll ^= 1; } #ifdef PLOOPY_DRAGSCROLL_FIXED - pmw_set_cpi(is_drag_scroll ? PLOOPY_DRAGSCROLL_DPI : dpi_array[keyboard_config.dpi_config]); + pointing_device_set_cpi(is_drag_scroll ? PLOOPY_DRAGSCROLL_DPI : dpi_array[keyboard_config.dpi_config]); #else - pmw_set_cpi(is_drag_scroll ? (dpi_array[keyboard_config.dpi_config] * PLOOPY_DRAGSCROLL_MULTIPLIER) : dpi_array[keyboard_config.dpi_config]); + pointing_device_set_cpi(is_drag_scroll ? (dpi_array[keyboard_config.dpi_config] * PLOOPY_DRAGSCROLL_MULTIPLIER) : dpi_array[keyboard_config.dpi_config]); #endif } @@ -194,11 +158,7 @@ bool process_record_kb(uint16_t keycode, keyrecord_t* record) { #ifndef MOUSEKEY_ENABLE if (IS_MOUSEKEY_BUTTON(keycode)) { report_mouse_t currentReport = pointing_device_get_report(); - if (record->event.pressed) { - currentReport.buttons |= 1 << (keycode - KC_MS_BTN1); - } else { - currentReport.buttons &= ~(1 << (keycode - KC_MS_BTN1)); - } + currentReport.buttons = pointing_device_handle_buttons(currentReport.buttons, record->event.pressed, keycode - KC_MS_BTN1); pointing_device_set_report(currentReport); pointing_device_send(); } @@ -240,35 +200,12 @@ void keyboard_pre_init_kb(void) { keyboard_pre_init_user(); } -void pointing_device_init(void) { - // initialize ball sensor - pmw_spi_init(); +void pointing_device_init_kb(void) { + pointing_device_set_cpi(dpi_array[keyboard_config.dpi_config]); // initialize the scroll wheel's optical encoder opt_encoder_init(); } - -void pointing_device_task(void) { - report_mouse_t mouse_report = pointing_device_get_report(); - process_wheel(&mouse_report); - process_mouse(&mouse_report); - - if (is_drag_scroll) { - mouse_report.h = mouse_report.x; -#ifdef PLOOPY_DRAGSCROLL_INVERT - // Invert vertical scroll direction - mouse_report.v = -mouse_report.y; -#else - mouse_report.v = mouse_report.y; -#endif - mouse_report.x = 0; - mouse_report.y = 0; - } - - pointing_device_set_report(mouse_report); - pointing_device_send(); -} - void eeconfig_init_kb(void) { keyboard_config.dpi_config = PLOOPY_DPI_DEFAULT; eeconfig_update_kb(keyboard_config.raw); @@ -284,9 +221,3 @@ void matrix_init_kb(void) { } matrix_init_user(); } - -void keyboard_post_init_kb(void) { - pmw_set_cpi(dpi_array[keyboard_config.dpi_config]); - - keyboard_post_init_user(); -} diff --git a/keyboards/ploopyco/mouse/mouse.h b/keyboards/ploopyco/mouse/mouse.h index d11aa5e9a4..ee59827139 100644 --- a/keyboards/ploopyco/mouse/mouse.h +++ b/keyboards/ploopyco/mouse/mouse.h @@ -19,11 +19,8 @@ #pragma once #include "quantum.h" -#include "spi_master.h" -#include "drivers/sensors/pmw3360.h" #include "analog.h" #include "opt_encoder.h" -#include "pointing_device.h" // Sensor defs #define OPT_ENC1 F0 @@ -31,10 +28,7 @@ #define OPT_ENC1_MUX 0 #define OPT_ENC2_MUX 4 -void process_mouse(report_mouse_t* mouse_report); -void process_mouse_user(report_mouse_t* mouse_report, int16_t x, int16_t y); void process_wheel(report_mouse_t* mouse_report); -void process_wheel_user(report_mouse_t* mouse_report, int16_t h, int16_t v); #define LAYOUT(BLL, BL, BM, BR, BRR, BF, BB, BDPI) \ { {BL, BM, BR, BF, BB, BRR, BLL, BDPI}, } diff --git a/keyboards/ploopyco/mouse/rules.mk b/keyboards/ploopyco/mouse/rules.mk index c02afa00c3..45cb38901a 100644 --- a/keyboards/ploopyco/mouse/rules.mk +++ b/keyboards/ploopyco/mouse/rules.mk @@ -22,7 +22,8 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output POINTING_DEVICE_ENABLE = yes +POINTING_DEVICE_DRIVER = pmw3360 MOUSEKEY_ENABLE = yes # Mouse keys -QUANTUM_LIB_SRC += analog.c spi_master.c -SRC += drivers/sensors/pmw3360.c opt_encoder.c +QUANTUM_LIB_SRC += analog.c +SRC += opt_encoder.c diff --git a/keyboards/ploopyco/trackball/rules.mk b/keyboards/ploopyco/trackball/rules.mk index af9bc7d4ce..d118581523 100644 --- a/keyboards/ploopyco/trackball/rules.mk +++ b/keyboards/ploopyco/trackball/rules.mk @@ -19,9 +19,10 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output POINTING_DEVICE_ENABLE = yes +POINTING_DEVICE_DRIVER = pmw3360 MOUSEKEY_ENABLE = yes # Mouse keys -QUANTUM_LIB_SRC += analog.c spi_master.c -SRC += drivers/sensors/pmw3360.c opt_encoder.c +QUANTUM_LIB_SRC += analog.c +SRC += opt_encoder.c DEFAULT_FOLDER = ploopyco/trackball/rev1_005 diff --git a/keyboards/ploopyco/trackball/trackball.c b/keyboards/ploopyco/trackball/trackball.c index 7190209979..e2a6e4ed5c 100644 --- a/keyboards/ploopyco/trackball/trackball.c +++ b/keyboards/ploopyco/trackball/trackball.c @@ -65,12 +65,7 @@ uint8_t OptLowPin = OPT_ENC1; bool debug_encoder = false; bool is_drag_scroll = false; -__attribute__((weak)) void process_wheel_user(report_mouse_t* mouse_report, int16_t h, int16_t v) { - mouse_report->h = h; - mouse_report->v = v; -} - -__attribute__((weak)) void process_wheel(report_mouse_t* mouse_report) { +void process_wheel(report_mouse_t* mouse_report) { // TODO: Replace this with interrupt driven code, polling is S L O W // Lovingly ripped from the Ploopy Source @@ -99,56 +94,25 @@ __attribute__((weak)) void process_wheel(report_mouse_t* mouse_report) { int dir = opt_encoder_handler(p1, p2); if (dir == 0) return; - process_wheel_user(mouse_report, mouse_report->h, (int)(mouse_report->v + (dir * OPT_SCALE))); + mouse_report->v = (int8_t)(dir * OPT_SCALE); } -__attribute__((weak)) void process_mouse_user(report_mouse_t* mouse_report, int16_t x, int16_t y) { - mouse_report->x = x; - mouse_report->y = y; -} - -__attribute__((weak)) void process_mouse(report_mouse_t* mouse_report) { - report_pmw_t data = pmw_read_burst(); - if (data.isOnSurface && data.isMotion) { - // Reset timer if stopped moving - if (!data.isMotion) { - if (MotionStart != 0) MotionStart = 0; - return; - } - - // Set timer if new motion - if ((MotionStart == 0) && data.isMotion) { - if (debug_mouse) dprintf("Starting motion.\n"); - MotionStart = timer_read(); - } +report_mouse_t pointing_device_task_kb(report_mouse_t mouse_report) { + process_wheel(&mouse_report); - if (debug_mouse) { - dprintf("Delt] d: %d t: %u\n", abs(data.dx) + abs(data.dy), MotionStart); - } - if (debug_mouse) { - dprintf("Pre ] X: %d, Y: %d\n", data.dx, data.dy); - } -#if defined(PROFILE_LINEAR) - float scale = float(timer_elaspsed(MotionStart)) / 1000.0; - data.dx *= scale; - data.dy *= scale; -#elif defined(PROFILE_INVERSE) - // TODO + if (is_drag_scroll) { + mouse_report.h = mouse_report.x; +#ifdef PLOOPY_DRAGSCROLL_INVERT + // Invert vertical scroll direction + mouse_report.v = -mouse_report.y; #else - // no post processing + mouse_report.v = mouse_report.y; #endif - // apply multiplier - // data.dx *= mouse_multiplier; - // data.dy *= mouse_multiplier; - - // Wrap to HID size - data.dx = constrain(data.dx, -127, 127); - data.dy = constrain(data.dy, -127, 127); - if (debug_mouse) dprintf("Cons] X: %d, Y: %d\n", data.dx, data.dy); - // dprintf("Elapsed:%u, X: %f Y: %\n", i, pgm_read_byte(firmware_data+i)); - - process_mouse_user(mouse_report, data.dx, -data.dy); + mouse_report.x = 0; + mouse_report.y = 0; } + + return pointing_device_task_user(mouse_report); } bool process_record_kb(uint16_t keycode, keyrecord_t* record) { @@ -169,7 +133,7 @@ bool process_record_kb(uint16_t keycode, keyrecord_t* record) { if (keycode == DPI_CONFIG && record->event.pressed) { keyboard_config.dpi_config = (keyboard_config.dpi_config + 1) % DPI_OPTION_SIZE; eeconfig_update_kb(keyboard_config.raw); - pmw_set_cpi(dpi_array[keyboard_config.dpi_config]); + pointing_device_set_cpi(dpi_array[keyboard_config.dpi_config]); } if (keycode == DRAG_SCROLL) { @@ -180,9 +144,9 @@ bool process_record_kb(uint16_t keycode, keyrecord_t* record) { is_drag_scroll ^= 1; } #ifdef PLOOPY_DRAGSCROLL_FIXED - pmw_set_cpi(is_drag_scroll ? PLOOPY_DRAGSCROLL_DPI : dpi_array[keyboard_config.dpi_config]); + pointing_device_set_cpi(is_drag_scroll ? PLOOPY_DRAGSCROLL_DPI : dpi_array[keyboard_config.dpi_config]); #else - pmw_set_cpi(is_drag_scroll ? (dpi_array[keyboard_config.dpi_config] * PLOOPY_DRAGSCROLL_MULTIPLIER) : dpi_array[keyboard_config.dpi_config]); + pointing_device_set_cpi(is_drag_scroll ? (dpi_array[keyboard_config.dpi_config] * PLOOPY_DRAGSCROLL_MULTIPLIER) : dpi_array[keyboard_config.dpi_config]); #endif } @@ -194,11 +158,7 @@ bool process_record_kb(uint16_t keycode, keyrecord_t* record) { #ifndef MOUSEKEY_ENABLE if (IS_MOUSEKEY_BUTTON(keycode)) { report_mouse_t currentReport = pointing_device_get_report(); - if (record->event.pressed) { - currentReport.buttons |= 1 << (keycode - KC_MS_BTN1); - } else { - currentReport.buttons &= ~(1 << (keycode - KC_MS_BTN1)); - } + currentReport.buttons = pointing_device_handle_buttons(record->event.pressed, keycode - KC_MS_BTN1); pointing_device_set_report(currentReport); pointing_device_send(); } @@ -239,35 +199,12 @@ void keyboard_pre_init_kb(void) { keyboard_pre_init_user(); } -void pointing_device_init(void) { - // initialize ball sensor - pmw_spi_init(); +void pointing_device_init_kb(void) { + pmw3360_set_cpi(dpi_array[keyboard_config.dpi_config]); // initialize the scroll wheel's optical encoder opt_encoder_init(); } - -void pointing_device_task(void) { - report_mouse_t mouse_report = pointing_device_get_report(); - process_wheel(&mouse_report); - process_mouse(&mouse_report); - - if (is_drag_scroll) { - mouse_report.h = mouse_report.x; -#ifdef PLOOPY_DRAGSCROLL_INVERT - // Invert vertical scroll direction - mouse_report.v = -mouse_report.y; -#else - mouse_report.v = mouse_report.y; -#endif - mouse_report.x = 0; - mouse_report.y = 0; - } - - pointing_device_set_report(mouse_report); - pointing_device_send(); -} - void eeconfig_init_kb(void) { keyboard_config.dpi_config = PLOOPY_DPI_DEFAULT; eeconfig_update_kb(keyboard_config.raw); @@ -285,7 +222,7 @@ void matrix_init_kb(void) { } void keyboard_post_init_kb(void) { - pmw_set_cpi(dpi_array[keyboard_config.dpi_config]); + pointing_device_set_cpi(dpi_array[keyboard_config.dpi_config]); keyboard_post_init_user(); } diff --git a/keyboards/ploopyco/trackball/trackball.h b/keyboards/ploopyco/trackball/trackball.h index 70f5d83b11..52d955325b 100644 --- a/keyboards/ploopyco/trackball/trackball.h +++ b/keyboards/ploopyco/trackball/trackball.h @@ -19,11 +19,8 @@ #pragma once #include "quantum.h" -#include "spi_master.h" -#include "drivers/sensors/pmw3360.h" #include "analog.h" #include "opt_encoder.h" -#include "pointing_device.h" #if defined(KEYBOARD_ploopyco_trackball_rev1) # include "rev1.h" #elif defined(KEYBOARD_ploopyco_trackball_rev1_005) @@ -36,10 +33,7 @@ #define OPT_ENC1_MUX 0 #define OPT_ENC2_MUX 4 -void process_mouse(report_mouse_t* mouse_report); -void process_mouse_user(report_mouse_t* mouse_report, int16_t x, int16_t y); void process_wheel(report_mouse_t* mouse_report); -void process_wheel_user(report_mouse_t* mouse_report, int16_t h, int16_t v); #define LAYOUT(BL, BM, BR, BF, BB) \ { {BL, BM, BR, BF, BB}, } diff --git a/keyboards/ploopyco/trackball_mini/config.h b/keyboards/ploopyco/trackball_mini/config.h index f76a6eb2c1..52d7390ca2 100644 --- a/keyboards/ploopyco/trackball_mini/config.h +++ b/keyboards/ploopyco/trackball_mini/config.h @@ -56,3 +56,9 @@ // If board has a debug LED, you can enable it by defining this // #define DEBUG_LED_PIN F7 + +#define ADNS5050_SCLK_PIN B7 +#define ADNS5050_SDIO_PIN C6 +#define ADNS5050_CS_PIN B4 + +#define POINTING_DEVICE_ROTATION_90 diff --git a/keyboards/ploopyco/trackball_mini/keymaps/drag_scroll/keymap.c b/keyboards/ploopyco/trackball_mini/keymaps/drag_scroll/keymap.c index 7784bc8553..7eb973216b 100644 --- a/keyboards/ploopyco/trackball_mini/keymaps/drag_scroll/keymap.c +++ b/keyboards/ploopyco/trackball_mini/keymaps/drag_scroll/keymap.c @@ -44,7 +44,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { // to only scroll in one direction, if you wanted, as well. In fact, // there is no reason that you need to send this to the mouse report. // You could have it register a key, instead. -void process_mouse_user(report_mouse_t* mouse_report, int16_t x, int16_t y) { +void process_mouse_user(report_mouse_t* mouse_report, int8_t x, int8_t y) { if (is_drag_scroll) { mouse_report->h = x; mouse_report->v = y; diff --git a/keyboards/ploopyco/trackball_mini/rules.mk b/keyboards/ploopyco/trackball_mini/rules.mk index 07a6889cbe..8d76c9b3dc 100644 --- a/keyboards/ploopyco/trackball_mini/rules.mk +++ b/keyboards/ploopyco/trackball_mini/rules.mk @@ -1,9 +1,6 @@ # MCU name MCU = atmega32u4 -# Processor frequency -F_CPU = 16000000 - # Bootloader selection BOOTLOADER = atmel-dfu @@ -22,9 +19,10 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output POINTING_DEVICE_ENABLE = yes +POINTING_DEVICE_DRIVER = adns5050 MOUSEKEY_ENABLE = no # Mouse keys QUANTUM_LIB_SRC += analog.c -SRC += drivers/sensors/adns5050.c opt_encoder.c +SRC += opt_encoder.c DEFAULT_FOLDER = ploopyco/trackball_mini/rev1_001 diff --git a/keyboards/ploopyco/trackball_mini/trackball_mini.c b/keyboards/ploopyco/trackball_mini/trackball_mini.c index b50850b549..2158a8f488 100644 --- a/keyboards/ploopyco/trackball_mini/trackball_mini.c +++ b/keyboards/ploopyco/trackball_mini/trackball_mini.c @@ -37,20 +37,17 @@ # define OPT_SCALE 1 // Multiplier for wheel #endif -#define PLOOPY_DPI_OPTIONS { CPI375, CPI750, CPI1375 } +#define PLOOPY_DPI_OPTIONS \ + { 375, 750, 1375 } #define PLOOPY_DPI_DEFAULT 2 #ifndef PLOOPY_DRAGSCROLL_DPI -# define PLOOPY_DRAGSCROLL_DPI CPI375 // Fixed-DPI Drag Scroll +# define PLOOPY_DRAGSCROLL_DPI 375 // Fixed-DPI Drag Scroll #endif #ifndef PLOOPY_DRAGSCROLL_MULTIPLIER # define PLOOPY_DRAGSCROLL_MULTIPLIER 0.75 // Variable-DPI Drag Scroll #endif -// Transformation constants for delta-X and delta-Y -const static float ADNS_X_TRANSFORM = -1.0; -const static float ADNS_Y_TRANSFORM = 1.0; - keyboard_config_t keyboard_config; uint16_t dpi_array[] = PLOOPY_DPI_OPTIONS; #define DPI_OPTION_SIZE (sizeof(dpi_array) / sizeof(uint16_t)) @@ -70,12 +67,7 @@ uint8_t OptLowPin = OPT_ENC1; bool debug_encoder = false; bool is_drag_scroll = false; -__attribute__((weak)) void process_wheel_user(report_mouse_t* mouse_report, int16_t h, int16_t v) { - mouse_report->h = h; - mouse_report->v = v; -} - -__attribute__((weak)) void process_wheel(report_mouse_t* mouse_report) { +void process_wheel(report_mouse_t* mouse_report) { // If the mouse wheel was just released, do not scroll. if (timer_elapsed(lastMidClick) < SCROLL_BUTT_DEBOUNCE) return; @@ -103,33 +95,31 @@ __attribute__((weak)) void process_wheel(report_mouse_t* mouse_report) { if (dir == 0) return; - process_wheel_user(mouse_report, mouse_report->h, (int)(mouse_report->v + (dir * OPT_SCALE))); + mouse_report->v = (int8_t)(dir * OPT_SCALE); } -__attribute__((weak)) void process_mouse_user(report_mouse_t* mouse_report, int16_t x, int16_t y) { - mouse_report->x = x; - mouse_report->y = y; -} - -__attribute__((weak)) void process_mouse(report_mouse_t* mouse_report) { - report_adns_t data = adns_read_burst(); - - if (data.dx != 0 || data.dy != 0) { - if (debug_mouse) - dprintf("Raw ] X: %d, Y: %d\n", data.dx, data.dy); +void pointing_device_init_kb(void) { + opt_encoder_init(); - // Apply delta-X and delta-Y transformations. - // x and y are swapped - // the sensor is rotated - // by 90 degrees - float xt = (float) data.dy * ADNS_X_TRANSFORM; - float yt = (float) data.dx * ADNS_Y_TRANSFORM; + // set the DPI. + pointing_device_set_cpi(dpi_array[keyboard_config.dpi_config]); +} - int16_t xti = (int16_t)xt; - int16_t yti = (int16_t)yt; +report_mouse_t pointing_device_task_kb(report_mouse_t mouse_report) { - process_mouse_user(mouse_report, xti, yti); + if (is_drag_scroll) { + mouse_report.h = mouse_report.x; +#ifdef PLOOPY_DRAGSCROLL_INVERT + // Invert vertical scroll direction + mouse_report.v = -mouse_report.y; +#else + mouse_report.v = mouse_report.y; +#endif + mouse_report.x = 0; + mouse_report.y = 0; } + + return pointing_device_task_user(mouse_report); } bool process_record_kb(uint16_t keycode, keyrecord_t* record) { @@ -147,7 +137,7 @@ bool process_record_kb(uint16_t keycode, keyrecord_t* record) { if (keycode == DPI_CONFIG && record->event.pressed) { keyboard_config.dpi_config = (keyboard_config.dpi_config + 1) % DPI_OPTION_SIZE; eeconfig_update_kb(keyboard_config.raw); - adns_set_cpi(dpi_array[keyboard_config.dpi_config]); + pointing_device_set_cpi(dpi_array[keyboard_config.dpi_config]); } if (keycode == DRAG_SCROLL) { @@ -157,7 +147,7 @@ bool process_record_kb(uint16_t keycode, keyrecord_t* record) { { is_drag_scroll ^= 1; } - adns_set_cpi(is_drag_scroll ? PLOOPY_DRAGSCROLL_DPI : dpi_array[keyboard_config.dpi_config]); + pointing_device_set_cpi(is_drag_scroll ? PLOOPY_DRAGSCROLL_DPI : dpi_array[keyboard_config.dpi_config]); } /* If Mousekeys is disabled, then use handle the mouse button @@ -168,11 +158,7 @@ bool process_record_kb(uint16_t keycode, keyrecord_t* record) { #ifndef MOUSEKEY_ENABLE if (IS_MOUSEKEY_BUTTON(keycode)) { report_mouse_t currentReport = pointing_device_get_report(); - if (record->event.pressed) { - currentReport.buttons |= 1 << (keycode - KC_MS_BTN1); - } else { - currentReport.buttons &= ~(1 << (keycode - KC_MS_BTN1)); - } + currentReport.buttons = pointing_device_handle_buttons(currentReport.buttons, record->event.pressed, keycode - KC_MS_BTN1); pointing_device_set_report(currentReport); pointing_device_send(); } @@ -207,48 +193,6 @@ void keyboard_pre_init_kb(void) { keyboard_pre_init_user(); } -void pointing_device_init(void) { - adns_init(); - opt_encoder_init(); - - // reboot the adns. - // if the adns hasn't initialized yet, this is harmless. - adns_write_reg(REG_CHIP_RESET, 0x5a); - - // wait maximum time before adns is ready. - // this ensures that the adns is actuall ready after reset. - wait_ms(55); - - // read a burst from the adns and then discard it. - // gets the adns ready for write commands - // (for example, setting the dpi). - adns_read_burst(); - - // set the DPI. - adns_set_cpi(dpi_array[keyboard_config.dpi_config]); -} - -void pointing_device_task(void) { - report_mouse_t mouse_report = pointing_device_get_report(); - process_wheel(&mouse_report); - process_mouse(&mouse_report); - - if (is_drag_scroll) { - mouse_report.h = mouse_report.x; -#ifdef PLOOPY_DRAGSCROLL_INVERT - // Invert vertical scroll direction - mouse_report.v = -mouse_report.y; -#else - mouse_report.v = mouse_report.y; -#endif - mouse_report.x = 0; - mouse_report.y = 0; - } - - pointing_device_set_report(mouse_report); - pointing_device_send(); -} - void eeconfig_init_kb(void) { keyboard_config.dpi_config = PLOOPY_DPI_DEFAULT; eeconfig_update_kb(keyboard_config.raw); diff --git a/keyboards/ploopyco/trackball_mini/trackball_mini.h b/keyboards/ploopyco/trackball_mini/trackball_mini.h index 7bcb02a940..fc86fe776e 100644 --- a/keyboards/ploopyco/trackball_mini/trackball_mini.h +++ b/keyboards/ploopyco/trackball_mini/trackball_mini.h @@ -20,10 +20,8 @@ #pragma once #include "quantum.h" -#include "drivers/sensors/adns5050.h" #include "analog.h" #include "opt_encoder.h" -#include "pointing_device.h" // Sensor defs #define OPT_ENC1 F0 @@ -31,10 +29,7 @@ #define OPT_ENC1_MUX 0 #define OPT_ENC2_MUX 4 -void process_mouse(report_mouse_t* mouse_report); -void process_mouse_user(report_mouse_t* mouse_report, int16_t x, int16_t y); void process_wheel(report_mouse_t* mouse_report); -void process_wheel_user(report_mouse_t* mouse_report, int16_t h, int16_t v); #define LAYOUT(BL, BM, BR, BF, BB) \ { {BL, BM, BR, BF, BB}, } diff --git a/keyboards/ploopyco/trackball_nano/config.h b/keyboards/ploopyco/trackball_nano/config.h index 7450f5574c..7d109db99e 100644 --- a/keyboards/ploopyco/trackball_nano/config.h +++ b/keyboards/ploopyco/trackball_nano/config.h @@ -45,3 +45,9 @@ a polling rate as possible. */ #define USB_POLLING_INTERVAL_MS 1 #define USB_MAX_POWER_CONSUMPTION 100 + +#define ADNS5050_SCLK_PIN B7 +#define ADNS5050_SDIO_PIN C6 +#define ADNS5050_CS_PIN B4 + +#define POINTING_DEVICE_ROTATION_90 diff --git a/keyboards/ploopyco/trackball_nano/keymaps/maddie/keymap.c b/keyboards/ploopyco/trackball_nano/keymaps/maddie/keymap.c index 6f568ecf51..9e33db3783 100644 --- a/keyboards/ploopyco/trackball_nano/keymaps/maddie/keymap.c +++ b/keyboards/ploopyco/trackball_nano/keymaps/maddie/keymap.c @@ -21,14 +21,14 @@ // safe range starts at `PLOOPY_SAFE_RANGE` instead. uint8_t scroll_enabled = 0; uint8_t lock_state = 0; -int16_t delta_x = 0; -int16_t delta_y = 0; +int8_t delta_x = 0; +int8_t delta_y = 0; -void process_mouse_user(report_mouse_t *mouse_report, int16_t x, int16_t y) { - if (scroll_enabled) { - delta_x += x; +void process_mouse_user(report_mouse_t *mouse_report, int8_t x, int8_t y) { + if (scroll_enabled) { + delta_x += x; delta_y += y; - + if (delta_x > 60) { mouse_report->h = 1; delta_x = 0; @@ -44,10 +44,10 @@ void process_mouse_user(report_mouse_t *mouse_report, int16_t x, int16_t y) { mouse_report->v = 1; delta_y = 0; } - } else { - mouse_report->x = x; + } else { + mouse_report->x = x; mouse_report->y = y; - } + } } void keyboard_post_init_user(void) { @@ -62,7 +62,7 @@ bool led_update_user(led_t led_state) { scroll_timer = timer_read(); lock_count = 0; } - + if (led_state.num_lock != lock_state) { lock_count++; @@ -73,7 +73,7 @@ bool led_update_user(led_t led_state) { delta_y = 0; } } - + lock_state = led_state.num_lock; return true; } diff --git a/keyboards/ploopyco/trackball_nano/rules.mk b/keyboards/ploopyco/trackball_nano/rules.mk index a26ad93c89..1a29a561e7 100644 --- a/keyboards/ploopyco/trackball_nano/rules.mk +++ b/keyboards/ploopyco/trackball_nano/rules.mk @@ -1,9 +1,6 @@ # MCU name MCU = atmega32u4 -# Processor frequency -F_CPU = 16000000 - # Bootloader selection BOOTLOADER = atmel-dfu @@ -22,9 +19,7 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output POINTING_DEVICE_ENABLE = yes +POINTING_DEVICE_DRIVER = adns5050 MOUSEKEY_ENABLE = no # Mouse keys -QUANTUM_LIB_SRC += analog.c -SRC += drivers/sensors/adns5050.c opt_encoder.c - DEFAULT_FOLDER = ploopyco/trackball_nano/rev1_001 diff --git a/keyboards/ploopyco/trackball_nano/trackball_nano.c b/keyboards/ploopyco/trackball_nano/trackball_nano.c index 9bcfa59ef8..2702f60557 100644 --- a/keyboards/ploopyco/trackball_nano/trackball_nano.c +++ b/keyboards/ploopyco/trackball_nano/trackball_nano.c @@ -37,7 +37,8 @@ #endif #ifndef PLOOPY_DPI_OPTIONS -# define PLOOPY_DPI_OPTIONS { CPI375, CPI750, CPI1375 } +# define PLOOPY_DPI_OPTIONS \ + { 375, 750, 1375 } # ifndef PLOOPY_DPI_DEFAULT # define PLOOPY_DPI_DEFAULT 2 # endif @@ -49,12 +50,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; -// Transformation constants for delta-X and delta-Y -const static float ADNS_X_TRANSFORM = -1.0; -const static float ADNS_Y_TRANSFORM = 1.0; - keyboard_config_t keyboard_config; -uint16_t dpi_array[] = PLOOPY_DPI_OPTIONS; +uint16_t dpi_array[] = PLOOPY_DPI_OPTIONS; #define DPI_OPTION_SIZE (sizeof(dpi_array) / sizeof(uint16_t)) // TODO: Implement libinput profiles @@ -63,77 +60,13 @@ uint16_t dpi_array[] = PLOOPY_DPI_OPTIONS; // Valid options are ACC_NONE, ACC_LINEAR, ACC_CUSTOM, ACC_QUADRATIC // Trackball State -bool is_scroll_clicked = false; -bool BurstState = false; // init burst state for Trackball module -uint16_t MotionStart = 0; // Timer for accel, 0 is resting state -uint16_t lastScroll = 0; // Previous confirmed wheel event -uint16_t lastMidClick = 0; // Stops scrollwheel from being read if it was pressed -uint8_t OptLowPin = OPT_ENC1; -bool debug_encoder = false; - -__attribute__((weak)) void process_mouse_user(report_mouse_t* mouse_report, int16_t x, int16_t y) { - mouse_report->x = x; - mouse_report->y = y; -} - -__attribute__((weak)) void process_mouse(report_mouse_t* mouse_report) { - report_adns_t data = adns_read_burst(); - - if (data.dx != 0 || data.dy != 0) { - if (debug_mouse) - dprintf("Raw ] X: %d, Y: %d\n", data.dx, data.dy); - - // Apply delta-X and delta-Y transformations. - // x and y are swapped - // the sensor is rotated - // by 90 degrees - float xt = (float) data.dy * ADNS_X_TRANSFORM; - float yt = (float) data.dx * ADNS_Y_TRANSFORM; - - int16_t xti = (int16_t)xt; - int16_t yti = (int16_t)yt; - - process_mouse_user(mouse_report, xti, yti); - } -} - -bool process_record_kb(uint16_t keycode, keyrecord_t* record) { - xprintf("KL: kc: %u, col: %u, row: %u, pressed: %u\n", keycode, record->event.key.col, record->event.key.row, record->event.pressed); - - // Update Timer to prevent accidental scrolls - if ((record->event.key.col == 1) && (record->event.key.row == 0)) { - lastMidClick = timer_read(); - is_scroll_clicked = record->event.pressed; - } - - if (!process_record_user(keycode, record)) - return false; - - if (keycode == DPI_CONFIG && record->event.pressed) { - keyboard_config.dpi_config = (keyboard_config.dpi_config + 1) % DPI_OPTION_SIZE; - eeconfig_update_kb(keyboard_config.raw); - adns_set_cpi(dpi_array[keyboard_config.dpi_config]); - } +bool is_scroll_clicked = false; +bool BurstState = false; // init burst state for Trackball module +uint16_t MotionStart = 0; // Timer for accel, 0 is resting state -/* If Mousekeys is disabled, then use handle the mouse button - * keycodes. This makes things simpler, and allows usage of - * the keycodes in a consistent manner. But only do this if - * Mousekeys is not enable, so it's not handled twice. - */ -#ifndef MOUSEKEY_ENABLE - if (IS_MOUSEKEY_BUTTON(keycode)) { - report_mouse_t currentReport = pointing_device_get_report(); - if (record->event.pressed) { - currentReport.buttons |= 1 << (keycode - KC_MS_BTN1); - } else { - currentReport.buttons &= ~(1 << (keycode - KC_MS_BTN1)); - } - pointing_device_set_report(currentReport); - pointing_device_send(); - } -#endif - - return true; +void pointing_device_init_kb(void) { + // set the DPI. + pointing_device_set_cpi(dpi_array[keyboard_config.dpi_config]); } // Hardware Setup @@ -143,9 +76,6 @@ void keyboard_pre_init_kb(void) { // debug_mouse = true; // debug_encoder = true; - setPinInput(OPT_ENC1); - setPinInput(OPT_ENC2); - /* Ground all output pins connected to ground. This provides additional * pathways to ground. If you're messing with this, know this: driving ANY * of these pins high will cause a short. On the MCU. Ka-blooey. @@ -162,34 +92,6 @@ void keyboard_pre_init_kb(void) { keyboard_pre_init_user(); } -void pointing_device_init(void) { - adns_init(); - opt_encoder_init(); - - // reboot the adns. - // if the adns hasn't initialized yet, this is harmless. - adns_write_reg(REG_CHIP_RESET, 0x5a); - - // wait maximum time before adns is ready. - // this ensures that the adns is actuall ready after reset. - wait_ms(55); - - // read a burst from the adns and then discard it. - // gets the adns ready for write commands - // (for example, setting the dpi). - adns_read_burst(); - - // set the DPI. - adns_set_cpi(dpi_array[keyboard_config.dpi_config]); -} - -void pointing_device_task(void) { - report_mouse_t mouse_report = pointing_device_get_report(); - process_mouse(&mouse_report); - pointing_device_set_report(mouse_report); - pointing_device_send(); -} - void eeconfig_init_kb(void) { keyboard_config.dpi_config = PLOOPY_DPI_DEFAULT; eeconfig_update_kb(keyboard_config.raw); diff --git a/keyboards/ploopyco/trackball_nano/trackball_nano.h b/keyboards/ploopyco/trackball_nano/trackball_nano.h index 6c8ecace7d..88725eab68 100644 --- a/keyboards/ploopyco/trackball_nano/trackball_nano.h +++ b/keyboards/ploopyco/trackball_nano/trackball_nano.h @@ -20,19 +20,6 @@ #pragma once #include "quantum.h" -#include "drivers/sensors/adns5050.h" -#include "analog.h" -#include "opt_encoder.h" -#include "pointing_device.h" - -// Sensor defs -#define OPT_ENC1 F0 -#define OPT_ENC2 F4 -#define OPT_ENC1_MUX 0 -#define OPT_ENC2_MUX 4 - -void process_mouse(report_mouse_t* mouse_report); -void process_mouse_user(report_mouse_t* mouse_report, int16_t x, int16_t y); #define LAYOUT(k00) {{ KC_NO }} diff --git a/keyboards/tkw/grandiceps/rev2/rules.mk b/keyboards/tkw/grandiceps/rev2/rules.mk index c8f3f05bdd..3e82c4507e 100644 --- a/keyboards/tkw/grandiceps/rev2/rules.mk +++ b/keyboards/tkw/grandiceps/rev2/rules.mk @@ -1,5 +1,4 @@ EEPROM_DRIVER = i2c POINTING_DEVICE_ENABLE = yes -SRC += drivers/sensors/pimoroni_trackball.c -QUANTUM_LIB_SRC += i2c_master.c +POINTING_DEVICE_DRIVER = pimoroni_trackball diff --git a/layouts/community/ergodox/drashna/keymap.c b/layouts/community/ergodox/drashna/keymap.c index dd47899d7a..3c9bcfeaa2 100644 --- a/layouts/community/ergodox/drashna/keymap.c +++ b/layouts/community/ergodox/drashna/keymap.c @@ -186,20 +186,20 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { #ifdef PIMORONI_TRACKBALL_ENABLE void run_trackball_cleanup(void) { - if (trackball_is_scrolling()) { - trackball_set_rgbw(RGB_CYAN, 0x00); - } else if (trackball_get_precision() != 1.0) { - trackball_set_rgbw(RGB_GREEN, 0x00); - } else { - trackball_set_rgbw(RGB_MAGENTA, 0x00); - } + // if (trackball_is_scrolling()) { + // trackball_set_rgbw(RGB_CYAN, 0x00); + // } else if (trackball_get_precision() != 1.0) { + // trackball_set_rgbw(RGB_GREEN, 0x00); + // } else { + // trackball_set_rgbw(RGB_MAGENTA, 0x00); + // } } void keyboard_post_init_keymap(void) { // trackball_set_precision(1.5); - trackball_set_rgbw(RGB_MAGENTA, 0x00); + // trackball_set_rgbw(RGB_MAGENTA, 0x00); } -void shutdown_keymap(void) { trackball_set_rgbw(RGB_RED, 0x00); } +// void shutdown_keymap(void) { trackball_set_rgbw(RGB_RED, 0x00); } static bool mouse_button_one, trackball_button_one; @@ -244,16 +244,16 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { break; #ifdef PIMORONI_TRACKBALL_ENABLE case PM_SCROLL: - trackball_set_scrolling(record->event.pressed); + // trackball_set_scrolling(record->event.pressed); run_trackball_cleanup(); break; case PM_PRECISION: - if (record->event.pressed) { - trackball_set_precision(1.5); - } else { - trackball_set_precision(1); - } - run_trackball_cleanup(); + // if (record->event.pressed) { + // trackball_set_precision(1.5); + // } else { + // trackball_set_precision(1); + // } + // run_trackball_cleanup(); break; # if !defined(MOUSEKEY_ENABLE) case KC_MS_BTN1: diff --git a/quantum/pointing_device.c b/quantum/pointing_device.c index 09d889f697..feeb2b3160 100644 --- a/quantum/pointing_device.c +++ b/quantum/pointing_device.c @@ -1,34 +1,56 @@ -/* -Copyright 2017 Joshua Broekhuijsen - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include -#include "report.h" -#include "host.h" -#include "timer.h" -#include "print.h" -#include "debug.h" +/* Copyright 2017 Joshua Broekhuijsen + * Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) + * Copyright 2021 Dasky (@daskygit) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + #include "pointing_device.h" +#ifdef MOUSEKEY_ENABLE +# include "mousekey.h" +#endif +#if (defined(POINTING_DEVICE_ROTATION_90) + defined(POINTING_DEVICE_ROTATION_180) + defined(POINTING_DEVICE_ROTATION_270)) > 1 +# error More than one rotation selected. This is not supported. +#endif static report_mouse_t mouseReport = {}; -__attribute__((weak)) bool has_mouse_report_changed(report_mouse_t new, report_mouse_t old) { return (new.buttons != old.buttons) || (new.x&& new.x != old.x) || (new.y&& new.y != old.y) || (new.h&& new.h != old.h) || (new.v&& new.v != old.v); } +extern const pointing_device_driver_t pointing_device_driver; + +__attribute__((weak)) bool has_mouse_report_changed(report_mouse_t new, report_mouse_t old) { return memcmp(&new, &old, sizeof(new)); } + +__attribute__((weak)) void pointing_device_init_kb(void) {} +__attribute__((weak)) void pointing_device_init_user(void) {} +__attribute__((weak)) report_mouse_t pointing_device_task_kb(report_mouse_t mouse_report) { return pointing_device_task_user(mouse_report); } +__attribute__((weak)) report_mouse_t pointing_device_task_user(report_mouse_t mouse_report) { return mouse_report; } + +__attribute__((weak)) uint8_t pointing_device_handle_buttons(uint8_t buttons, bool pressed, pointing_device_buttons_t button) { + if (pressed) { + buttons |= 1 << (button); + } else { + buttons &= ~(1 << (button)); + } + return buttons; +} __attribute__((weak)) void pointing_device_init(void) { - // initialize device, if that needs to be done. + pointing_device_driver.init(); +#ifdef POINTING_DEVICE_MOTION_PIN + setPinInputHigh(POINTING_DEVICE_MOTION_PIN); +#endif + pointing_device_init_kb(); + pointing_device_init_user(); } __attribute__((weak)) void pointing_device_send(void) { @@ -43,20 +65,55 @@ __attribute__((weak)) void pointing_device_send(void) { mouseReport.y = 0; mouseReport.v = 0; mouseReport.h = 0; - old_report = mouseReport; + + memcpy(&old_report, &mouseReport, sizeof(mouseReport)); } __attribute__((weak)) void pointing_device_task(void) { - // gather info and put it in: - // mouseReport.x = 127 max -127 min - // mouseReport.y = 127 max -127 min - // mouseReport.v = 127 max -127 min (scroll vertical) - // mouseReport.h = 127 max -127 min (scroll horizontal) - // mouseReport.buttons = 0x1F (decimal 31, binary 00011111) max (bitmask for mouse buttons 1-5, 1 is rightmost, 5 is leftmost) 0x00 min - // send the report + // Gather report info +#ifdef POINTING_DEVICE_MOTION_PIN + if (!readPin(POINTING_DEVICE_MOTION_PIN)) +#endif + mouseReport = pointing_device_driver.get_report(mouseReport); + + // Support rotation of the sensor data +#if defined(POINTING_DEVICE_ROTATION_90) || defined(POINTING_DEVICE_ROTATION_180) || defined(POINTING_DEVICE_ROTATION_270) + int8_t x = mouseReport.x, y = mouseReport.y; +# if defined(POINTING_DEVICE_ROTATION_90) + mouseReport.x = y; + mouseReport.y = -x; +# elif defined(POINTING_DEVICE_ROTATION_180) + mouseReport.x = -x; + mouseReport.y = -y; +# elif defined(POINTING_DEVICE_ROTATION_270) + mouseReport.x = -y; + mouseReport.y = x; +# else +# error "How the heck did you get here?!" +# endif +#endif + // Support Inverting the X and Y Axises +#if defined(POINTING_DEVICE_INVERT_X) + mouseReport.x = -mouseReport.x; +#endif +#if defined(POINTING_DEVICE_INVERT_Y) + mouseReport.y = -mouseReport.y; +#endif + + // allow kb to intercept and modify report + mouseReport = pointing_device_task_kb(mouseReport); + // combine with mouse report to ensure that the combined is sent correctly +#ifdef MOUSEKEY_ENABLE + report_mouse_t mousekey_report = mousekey_get_report(); + mouseReport.buttons = mouseReport.buttons | mousekey_report.buttons; +#endif pointing_device_send(); } report_mouse_t pointing_device_get_report(void) { return mouseReport; } void pointing_device_set_report(report_mouse_t newMouseReport) { mouseReport = newMouseReport; } + +uint16_t pointing_device_get_cpi(void) { return pointing_device_driver.get_cpi(); } + +void pointing_device_set_cpi(uint16_t cpi) { pointing_device_driver.set_cpi(cpi); } diff --git a/quantum/pointing_device.h b/quantum/pointing_device.h index 56a542d545..5106c26660 100644 --- a/quantum/pointing_device.h +++ b/quantum/pointing_device.h @@ -21,9 +21,68 @@ along with this program. If not, see . #include "host.h" #include "report.h" +#if defined(POINTING_DEVICE_DRIVER_adns5050) +# include "drivers/sensors/adns5050.h" +#elif defined(POINTING_DEVICE_DRIVER_adns9800) +# include "spi_master.h" +# include "drivers/sensors/adns9800.h" +#elif defined(POINTING_DEVICE_DRIVER_analog_joystick) +# include "analog.h" +# include "drivers/sensors/analog_joystick.h" +#elif defined(POINTING_DEVICE_DRIVER_cirque_pinnacle_i2c) || defined(POINTING_DEVICE_DRIVER_cirque_pinnacle_spi) +# include "drivers/sensors/cirque_pinnacle.h" +#elif defined(POINTING_DEVICE_DRIVER_pimoroni_trackball) +# include "i2c_master.h" +# include "drivers/sensors/pimoroni_trackball.h" +// support for legacy pimoroni defines +# ifdef PIMORONI_TRACKBALL_INVERT_X +# define POINTING_DEVICE_INVERT_X +# endif +# ifdef PIMORONI_TRACKBALL_INVERT_Y +# define POINTING_DEVICE_INVERT_Y +# endif +# ifdef PIMORONI_TRACKBALL_ROTATE +# define POINTING_DEVICE_ROTATION_90 +# endif +#elif defined(POINTING_DEVICE_DRIVER_pmw3360) +# include "spi_master.h" +# include "drivers/sensors/pmw3360.h" +#else +void pointing_device_driver_init(void); +report_mouse_t pointing_device_driver_get_report(report_mouse_t mouse_report); +uint16_t pointing_device_driver_get_cpi(void); +void pointing_device_driver_set_cpi(uint16_t cpi); +#endif + +typedef struct { + void (*init)(void); + report_mouse_t (*get_report)(report_mouse_t mouse_report); + void (*set_cpi)(uint16_t); + uint16_t (*get_cpi)(void); +} pointing_device_driver_t; + +typedef enum { + POINTING_DEVICE_BUTTON1, + POINTING_DEVICE_BUTTON2, + POINTING_DEVICE_BUTTON3, + POINTING_DEVICE_BUTTON4, + POINTING_DEVICE_BUTTON5, + POINTING_DEVICE_BUTTON6, + POINTING_DEVICE_BUTTON7, + POINTING_DEVICE_BUTTON8, +} pointing_device_buttons_t; + void pointing_device_init(void); void pointing_device_task(void); void pointing_device_send(void); report_mouse_t pointing_device_get_report(void); void pointing_device_set_report(report_mouse_t newMouseReport); bool has_mouse_report_changed(report_mouse_t new, report_mouse_t old); +uint16_t pointing_device_get_cpi(void); +void pointing_device_set_cpi(uint16_t cpi); + +void pointing_device_init_kb(void); +void pointing_device_init_user(void); +report_mouse_t pointing_device_task_kb(report_mouse_t mouse_report); +report_mouse_t pointing_device_task_user(report_mouse_t mouse_report); +uint8_t pointing_device_handle_buttons(uint8_t buttons, bool pressed, pointing_device_buttons_t button); diff --git a/quantum/pointing_device_drivers.c b/quantum/pointing_device_drivers.c new file mode 100644 index 0000000000..9ad5e76ba6 --- /dev/null +++ b/quantum/pointing_device_drivers.c @@ -0,0 +1,262 @@ +/* Copyright 2017 Joshua Broekhuijsen + * Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) + * Copyright 2021 Dasky (@daskygit) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "pointing_device.h" +#include "debug.h" +#include "wait.h" +#include "timer.h" +#include + +// hid mouse reports cannot exceed -127 to 127, so constrain to that value +#define constrain_hid(amt) ((amt) < -127 ? -127 : ((amt) > 127 ? 127 : (amt))) + +// get_report functions should probably be moved to their respective drivers. +#if defined(POINTING_DEVICE_DRIVER_adns5050) +report_mouse_t adns5050_get_report(report_mouse_t mouse_report) { + report_adns5050_t data = adns5050_read_burst(); + + if (data.dx != 0 || data.dy != 0) { +# ifdef CONSOLE_ENABLE + if (debug_mouse) dprintf("Raw ] X: %d, Y: %d\n", data.dx, data.dy); +# endif + + mouse_report.x = data.dx; + mouse_report.y = data.dy; + } + + return mouse_report; +} + +// clang-format off +const pointing_device_driver_t pointing_device_driver = { + .init = adns5050_init, + .get_report = adns5050_get_report, + .set_cpi = adns5050_set_cpi, + .get_cpi = adns5050_get_cpi, +}; +// clang-format on +#elif defined(POINTING_DEVICE_DRIVER_adns9800) + +report_mouse_t adns9800_get_report_driver(report_mouse_t mouse_report) { + report_adns9800_t sensor_report = adns9800_get_report(); + + int8_t clamped_x = constrain_hid(sensor_report.x); + int8_t clamped_y = constrain_hid(sensor_report.y); + + mouse_report.x = clamped_x; + mouse_report.y = clamped_y; + + return mouse_report; +} + +// clang-format off +const pointing_device_driver_t pointing_device_driver = { + .init = adns9800_init, + .get_report = adns9800_get_report_driver, + .set_cpi = adns9800_set_cpi, + .get_cpi = adns9800_get_cpi +}; +// clang-format on +#elif defined(POINTING_DEVICE_DRIVER_analog_joystick) +report_mouse_t analog_joystick_get_report(report_mouse_t mouse_report) { + report_analog_joystick_t data = analog_joystick_read(); + +# ifdef CONSOLE_ENABLE + if (debug_mouse) dprintf("Raw ] X: %d, Y: %d\n", data.x, data.y); +# endif + + mouse_report.x = data.x; + mouse_report.y = data.y; + + mouse_report.buttons = pointing_device_handle_buttons(mouse_report.buttons, data.button, POINTING_DEVICE_BUTTON1); + + return mouse_report; +} + +// clang-format off +const pointing_device_driver_t pointing_device_driver = { + .init = analog_joystick_init, + .get_report = analog_joystick_get_report, + .set_cpi = NULL, + .get_cpi = NULL +}; +// clang-format on +#elif defined(POINTING_DEVICE_DRIVER_cirque_pinnacle_i2c) || defined(POINTING_DEVICE_DRIVER_cirque_pinnacle_spi) +# ifndef CIRQUE_PINNACLE_TAPPING_TERM +# ifdef TAPPING_TERM_PER_KEY +# include "action.h" +# include "action_tapping.h" +# define CIRQUE_PINNACLE_TAPPING_TERM get_tapping_term(KC_BTN1, NULL) +# else +# ifdef TAPPING_TERM +# define CIRQUE_PINNACLE_TAPPING_TERM TAPPING_TERM +# else +# define CIRQUE_PINNACLE_TAPPING_TERM 200 +# endif +# endif +# endif +# ifndef CIRQUE_PINNACLE_TOUCH_DEBOUNCE +# define CIRQUE_PINNACLE_TOUCH_DEBOUNCE (CIRQUE_PINNACLE_TAPPING_TERM * 8) +# endif + +report_mouse_t cirque_pinnacle_get_report(report_mouse_t mouse_report) { + pinnacle_data_t touchData = cirque_pinnacle_read_data(); + static uint16_t x = 0, y = 0, mouse_timer = 0; + int8_t report_x = 0, report_y = 0; + static bool is_z_down = false; + + cirque_pinnacle_scale_data(&touchData, cirque_pinnacle_get_scale(), cirque_pinnacle_get_scale()); // Scale coordinates to arbitrary X, Y resolution + + if (x && y && touchData.xValue && touchData.yValue) { + report_x = (int8_t)(touchData.xValue - x); + report_y = (int8_t)(touchData.yValue - y); + } + x = touchData.xValue; + y = touchData.yValue; + + if ((bool)touchData.zValue != is_z_down) { + is_z_down = (bool)touchData.zValue; + if (!touchData.zValue) { + if (timer_elapsed(mouse_timer) < CIRQUE_PINNACLE_TAPPING_TERM && mouse_timer != 0) { + mouse_report.buttons = pointing_device_handle_buttons(mouse_report.buttons, true, POINTING_DEVICE_BUTTON1); + pointing_device_set_report(mouse_report); + pointing_device_send(); +# if TAP_CODE_DELAY > 0 + wait_ms(TAP_CODE_DELAY); +# endif + mouse_report.buttons = pointing_device_handle_buttons(mouse_report.buttons, false, POINTING_DEVICE_BUTTON1); + pointing_device_set_report(mouse_report); + pointing_device_send(); + } + } + mouse_timer = timer_read(); + } + if (timer_elapsed(mouse_timer) > (CIRQUE_PINNACLE_TOUCH_DEBOUNCE)) { + mouse_timer = 0; + } + mouse_report.x = report_x; + mouse_report.y = report_y; + + return mouse_report; +} + +// clang-format off +const pointing_device_driver_t pointing_device_driver = { + .init = cirque_pinnacle_init, + .get_report = cirque_pinnacle_get_report, + .set_cpi = cirque_pinnacle_set_scale, + .get_cpi = cirque_pinnacle_get_scale +}; +// clang-format on + +#elif defined(POINTING_DEVICE_DRIVER_pimoroni_trackball) +report_mouse_t pimorono_trackball_get_report(report_mouse_t mouse_report) { + static fast_timer_t throttle = 0; + static uint16_t debounce = 0; + static uint8_t error_count = 0; + pimoroni_data_t pimoroni_data = {0}; + static int16_t x_offset = 0, y_offset = 0; + + if (error_count < PIMORONI_TRACKBALL_ERROR_COUNT && timer_elapsed_fast(throttle) >= PIMORONI_TRACKBALL_INTERVAL_MS) { + i2c_status_t status = read_pimoroni_trackball(&pimoroni_data); + + if (status == I2C_STATUS_SUCCESS) { + error_count = 0; + + if (!(pimoroni_data.click & 128)) { + mouse_report.buttons = pointing_device_handle_buttons(mouse_report.buttons, false, POINTING_DEVICE_BUTTON1); + if (!debounce) { + x_offset += pimoroni_trackball_get_offsets(pimoroni_data.right, pimoroni_data.left, PIMORONI_TRACKBALL_SCALE); + y_offset += pimoroni_trackball_get_offsets(pimoroni_data.down, pimoroni_data.up, PIMORONI_TRACKBALL_SCALE); + pimoroni_trackball_adapt_values(&mouse_report.x, &x_offset); + pimoroni_trackball_adapt_values(&mouse_report.y, &y_offset); + } else { + debounce--; + } + } else { + mouse_report.buttons = pointing_device_handle_buttons(mouse_report.buttons, true, POINTING_DEVICE_BUTTON1); + debounce = PIMORONI_TRACKBALL_DEBOUNCE_CYCLES; + } + } else { + error_count++; + } + throttle = timer_read_fast(); + } + return mouse_report; +} + +// clang-format off +const pointing_device_driver_t pointing_device_driver = { + .init = pimironi_trackball_device_init, + .get_report = pimorono_trackball_get_report, + .set_cpi = NULL, + .get_cpi = NULL +}; +// clang-format on +#elif defined(POINTING_DEVICE_DRIVER_pmw3360) + +static void init(void) { pmw3360_init(); } + +report_mouse_t pmw3360_get_report(report_mouse_t mouse_report) { + report_pmw3360_t data = pmw3360_read_burst(); + static uint16_t MotionStart = 0; // Timer for accel, 0 is resting state + + if (data.isOnSurface && data.isMotion) { + // Reset timer if stopped moving + if (!data.isMotion) { + if (MotionStart != 0) MotionStart = 0; + return mouse_report; + } + + // Set timer if new motion + if ((MotionStart == 0) && data.isMotion) { +# ifdef CONSOLE_ENABLE + if (debug_mouse) dprintf("Starting motion.\n"); +# endif + MotionStart = timer_read(); + } + mouse_report.x = constrain_hid(data.dx); + mouse_report.y = constrain_hid(data.dy); + } + + return mouse_report; +} + +// clang-format off +const pointing_device_driver_t pointing_device_driver = { + .init = init, + .get_report = pmw3360_get_report, + .set_cpi = pmw3360_set_cpi, + .get_cpi = pmw3360_get_cpi +}; +// clang-format on +#else +__attribute__((weak)) void pointing_device_driver_init(void) {} +__attribute__((weak)) report_mouse_t pointing_device_driver_get_report(report_mouse_t mouse_report) { return mouse_report; } +__attribute__((weak)) uint16_t pointing_device_driver_get_cpi(void) { return 0; } +__attribute__((weak)) void pointing_device_driver_set_cpi(uint16_t cpi) {} + +// clang-format off +const pointing_device_driver_t pointing_device_driver = { + .init = pointing_device_driver_init, + .get_report = pointing_device_driver_get_report, + .get_cpi = pointing_device_driver_get_cpi, + .set_cpi = pointing_device_driver_set_cpi +}; +// clang-format on +#endif diff --git a/quantum/quantum.c b/quantum/quantum.c index 0eca329f08..c7a3bb1970 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -531,6 +531,10 @@ void suspend_power_down_quantum(void) { # ifdef ST7565_ENABLE st7565_off(); # endif +# if defined(POINTING_DEVICE_ENABLE) + // run to ensure scanning occurs while suspended + pointing_device_task(); +# endif #endif } diff --git a/quantum/quantum.h b/quantum/quantum.h index 9250f5acce..e6015adbe9 100644 --- a/quantum/quantum.h +++ b/quantum/quantum.h @@ -204,6 +204,10 @@ extern layer_state_t layer_state; # include "encoder.h" #endif +#ifdef POINTING_DEVICE_ENABLE +# include "pointing_device.h" +#endif + // For tri-layer void update_tri_layer(uint8_t layer1, uint8_t layer2, uint8_t layer3); layer_state_t update_tri_layer_state(layer_state_t state, uint8_t layer1, uint8_t layer2, uint8_t layer3); From ca4b54bb30967a17f830301bffc0253f061f4275 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Mon, 15 Nov 2021 01:15:45 -0800 Subject: [PATCH 486/595] Fix uart function prototypes (#15162) --- platforms/avr/drivers/uart.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/platforms/avr/drivers/uart.h b/platforms/avr/drivers/uart.h index 9cb7652b08..e2dc664eda 100644 --- a/platforms/avr/drivers/uart.h +++ b/platforms/avr/drivers/uart.h @@ -32,8 +32,8 @@ void uart_write(uint8_t data); uint8_t uart_read(void); -void uart_transmit(const char *data, uint16_t length); +void uart_transmit(const uint8_t *data, uint16_t length); -void uart_receive(char *data, uint16_t length); +void uart_receive(uint8_t *data, uint16_t length); bool uart_available(void); From b3ee124da666287ef13787523ea88bf40713ff4c Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Mon, 15 Nov 2021 09:09:31 -0800 Subject: [PATCH 487/595] Add needed include to pointing_device.c (#15167) --- quantum/pointing_device.c | 1 + 1 file changed, 1 insertion(+) diff --git a/quantum/pointing_device.c b/quantum/pointing_device.c index feeb2b3160..2fefdb67b6 100644 --- a/quantum/pointing_device.c +++ b/quantum/pointing_device.c @@ -17,6 +17,7 @@ */ #include "pointing_device.h" +#include #ifdef MOUSEKEY_ENABLE # include "mousekey.h" #endif From 36d123e9c5a9ce0e29b9bc22ef87661bf479e299 Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Tue, 16 Nov 2021 05:21:09 +1100 Subject: [PATCH 488/595] Add support for deferred executors. (#14859) * Add support for deferred executors. * More docs. * Include from quantum.h * Cleanup. * Parameter checks * Comments. * qmk format-c * I accidentally a few words. * API name change. * Apply suggestions from code review Co-authored-by: Sergey Vlasov * Review comments. * qmk format-c * Review comments. Co-authored-by: Sergey Vlasov --- builddefs/generic_features.mk | 1 + docs/config_options.md | 2 + docs/custom_quantum_functions.md | 66 ++++++++ docs/getting_started_make_guide.md | 4 + quantum/deferred_exec.c | 152 +++++++++++++++++++ quantum/deferred_exec.h | 38 +++++ quantum/main.c | 10 ++ quantum/quantum.h | 4 + tmk_core/protocol/arm_atsam/main_arm_atsam.c | 9 ++ 9 files changed, 286 insertions(+) create mode 100644 quantum/deferred_exec.c create mode 100644 quantum/deferred_exec.h diff --git a/builddefs/generic_features.mk b/builddefs/generic_features.mk index 2281a82917..e41ce6ac91 100644 --- a/builddefs/generic_features.mk +++ b/builddefs/generic_features.mk @@ -19,6 +19,7 @@ GRAVE_ESC_ENABLE ?= yes GENERIC_FEATURES = \ COMBO \ COMMAND \ + DEFERRED_EXEC \ DIGITIZER \ DIP_SWITCH \ DYNAMIC_KEYMAP \ diff --git a/docs/config_options.md b/docs/config_options.md index ece7ab8ee3..9f2453b698 100644 --- a/docs/config_options.md +++ b/docs/config_options.md @@ -446,6 +446,8 @@ Use these to enable or disable building certain features. The more you have enab * Forces the keyboard to wait for a USB connection to be established before it starts up * `NO_USB_STARTUP_CHECK` * Disables usb suspend check after keyboard startup. Usually the keyboard waits for the host to wake it up before any tasks are performed. This is useful for split keyboards as one half will not get a wakeup call but must send commands to the master. +* `DEFERRED_EXEC_ENABLE` + * Enables deferred executor support -- timed delays before callbacks are invoked. See [deferred execution](custom_quantum_functions.md#deferred-execution) for more information. ## USB Endpoint Limitations diff --git a/docs/custom_quantum_functions.md b/docs/custom_quantum_functions.md index 798c346e67..dd1654bd29 100644 --- a/docs/custom_quantum_functions.md +++ b/docs/custom_quantum_functions.md @@ -405,3 +405,69 @@ And you're done. The RGB layer indication will only work if you want it to. And * Keymap: `void eeconfig_init_user(void)`, `uint32_t eeconfig_read_user(void)` and `void eeconfig_update_user(uint32_t val)` The `val` is the value of the data that you want to write to EEPROM. And the `eeconfig_read_*` function return a 32 bit (DWORD) value from the EEPROM. + +### Deferred Execution :id=deferred-execution + +QMK has the ability to execute a callback after a specified period of time, rather than having to manually manage timers. + +#### Deferred executor callbacks + +All _deferred executor callbacks_ have a common function signature and look like: + +```c +uint32_t my_callback(uint32_t trigger_time, void *cb_arg) { + /* do something */ + bool repeat = my_deferred_functionality(); + return repeat ? 500 : 0; +} +``` + +The first argument `trigger_time` is the intended time of execution. If other delays prevent executing at the exact trigger time, this allows for "catch-up" or even skipping intervals, depending on the required behaviour. + +The second argument `cb_arg` is the same argument passed into `defer_exec()` below, and can be used to access state information from the original call context. + +The return value is the number of milliseconds to use if the function should be repeated -- if the callback returns `0` then it's automatically unregistered. In the example above, a hypothetical `my_deferred_functionality()` is invoked to determine if the callback needs to be repeated -- if it does, it reschedules for a `500` millisecond delay, otherwise it informs the deferred execution background task that it's done, by returning `0`. + +?> Note that the returned delay will be applied to the intended trigger time, not the time of callback invocation. This allows for generally consistent timing even in the face of occasional late execution. + +#### Deferred executor registration + +Once a callback has been defined, it can be scheduled using the following API: + +```c +deferred_token my_token = defer_exec(1500, my_callback, NULL); +``` + +The first argument is the number of milliseconds to wait until executing `my_callback` -- in the case above, `1500` milliseconds, or 1.5 seconds. + +The third parameter is the `cb_arg` that gets passed to the callback at the point of execution. This value needs to be valid at the time the callback is invoked -- a local function value will be destroyed before the callback is executed and should not be used. If this is not required, `NULL` should be used. + +The return value is a `deferred_token` that can consequently be used to cancel the deferred executor callback before it's invoked. If a failure occurs, the returned value will be `INVALID_DEFERRED_TOKEN`. Usually this will be as a result of supplying `0` to the delay, or a `NULL` for the callback. The other failure case is if there are too many deferred executions "in flight" -- this can be increased by changing the limit, described below. + +#### Extending a deferred execution + +The `deferred_token` returned by `defer_exec()` can be used to extend a the duration a pending execution waits before it gets invoked: +```c +// This will re-delay my_token's future execution such that it is invoked 800ms after the current time +extend_deferred_exec(my_token, 800); +``` + +#### Cancelling a deferred execution + +The `deferred_token` returned by `defer_exec()` can be used to cancel a pending execution before it gets invoked: +```c +// This will cancel my_token's future execution +cancel_deferred_exec(my_token); +``` + +Once a token has been canceled, it should be considered invalid. Reusing the same token is not supported. + +#### Deferred callback limits + +There are a maximum number of deferred callbacks that can be scheduled, controlled by the value of the define `MAX_DEFERRED_EXECUTORS`. + +If registrations fail, then you can increase this value in your keyboard or keymap `config.h` file, for example to 16 instead of the default 8: + +```c +#define MAX_DEFERRED_EXECUTORS 16 +``` diff --git a/docs/getting_started_make_guide.md b/docs/getting_started_make_guide.md index a514864353..1a7e276098 100644 --- a/docs/getting_started_make_guide.md +++ b/docs/getting_started_make_guide.md @@ -145,6 +145,10 @@ Lets you replace the default matrix scanning routine with your own code. For fur Lets you replace the default key debouncing routine with an alternative one. If `custom` you will need to provide your own implementation. +`DEFERRED_EXEC_ENABLE` + +Enables deferred executor support -- timed delays before callbacks are invoked. See [deferred execution](custom_quantum_functions.md#deferred-execution) for more information. + ## Customizing Makefile Options on a Per-Keymap Basis If your keymap directory has a file called `rules.mk` any options you set in that file will take precedence over other `rules.mk` options for your particular keyboard. diff --git a/quantum/deferred_exec.c b/quantum/deferred_exec.c new file mode 100644 index 0000000000..5b0a5b1425 --- /dev/null +++ b/quantum/deferred_exec.c @@ -0,0 +1,152 @@ +// Copyright 2021 Nick Brassel (@tzarc) +// SPDX-License-Identifier: GPL-2.0-or-later + +#include +#include +#include + +#ifndef MAX_DEFERRED_EXECUTORS +# define MAX_DEFERRED_EXECUTORS 8 +#endif + +typedef struct deferred_executor_t { + deferred_token token; + uint32_t trigger_time; + deferred_exec_callback callback; + void * cb_arg; +} deferred_executor_t; + +static deferred_token current_token = 0; +static uint32_t last_deferred_exec_check = 0; +static deferred_executor_t executors[MAX_DEFERRED_EXECUTORS] = {0}; + +static inline bool token_can_be_used(deferred_token token) { + if (token == INVALID_DEFERRED_TOKEN) { + return false; + } + for (int i = 0; i < MAX_DEFERRED_EXECUTORS; ++i) { + if (executors[i].token == token) { + return false; + } + } + return true; +} + +static inline deferred_token allocate_token(void) { + deferred_token first = ++current_token; + while (!token_can_be_used(current_token)) { + ++current_token; + if (current_token == first) { + // If we've looped back around to the first, everything is already allocated (yikes!). Need to exit with a failure. + return INVALID_DEFERRED_TOKEN; + } + } + return current_token; +} + +deferred_token defer_exec(uint32_t delay_ms, deferred_exec_callback callback, void *cb_arg) { + // Ignore queueing if it's a zero-time delay, or invalid callback + if (delay_ms == 0 || !callback) { + return INVALID_DEFERRED_TOKEN; + } + + // Find an unused slot and claim it + for (int i = 0; i < MAX_DEFERRED_EXECUTORS; ++i) { + deferred_executor_t *entry = &executors[i]; + if (entry->token == INVALID_DEFERRED_TOKEN) { + // Work out the new token value, dropping out if none were available + deferred_token token = allocate_token(); + if (token == INVALID_DEFERRED_TOKEN) { + return false; + } + + // Set up the executor table entry + entry->token = current_token; + entry->trigger_time = timer_read32() + delay_ms; + entry->callback = callback; + entry->cb_arg = cb_arg; + return current_token; + } + } + + // None available + return INVALID_DEFERRED_TOKEN; +} + +bool extend_deferred_exec(deferred_token token, uint32_t delay_ms) { + // Ignore queueing if it's a zero-time delay, or the token is not valid + if (delay_ms == 0 || token == INVALID_DEFERRED_TOKEN) { + return false; + } + + // Find the entry corresponding to the token + for (int i = 0; i < MAX_DEFERRED_EXECUTORS; ++i) { + deferred_executor_t *entry = &executors[i]; + if (entry->token == token) { + // Found it, extend the delay + entry->trigger_time = timer_read32() + delay_ms; + return true; + } + } + + // Not found + return false; +} + +bool cancel_deferred_exec(deferred_token token) { + // Ignore request if the token is not valid + if (token == INVALID_DEFERRED_TOKEN) { + return false; + } + + // Find the entry corresponding to the token + for (int i = 0; i < MAX_DEFERRED_EXECUTORS; ++i) { + deferred_executor_t *entry = &executors[i]; + if (entry->token == token) { + // Found it, cancel and clear the table entry + entry->token = INVALID_DEFERRED_TOKEN; + entry->trigger_time = 0; + entry->callback = NULL; + entry->cb_arg = NULL; + return true; + } + } + + // Not found + return false; +} + +void deferred_exec_task(void) { + uint32_t now = timer_read32(); + + // Throttle only once per millisecond + if (((int32_t)TIMER_DIFF_32(now, last_deferred_exec_check)) > 0) { + last_deferred_exec_check = now; + + // Run through each of the executors + for (int i = 0; i < MAX_DEFERRED_EXECUTORS; ++i) { + deferred_executor_t *entry = &executors[i]; + + // Check if we're supposed to execute this entry + if (entry->token != INVALID_DEFERRED_TOKEN && ((int32_t)TIMER_DIFF_32(entry->trigger_time, now)) <= 0) { + // Invoke the callback and work work out if we should be requeued + uint32_t delay_ms = entry->callback(entry->trigger_time, entry->cb_arg); + + // Update the trigger time if we have to repeat, otherwise clear it out + if (delay_ms > 0) { + // Intentionally add just the delay to the existing trigger time -- this ensures the next + // invocation is with respect to the previous trigger, rather than when it got to execution. Under + // normal circumstances this won't cause issue, but if another executor is invoked that takes a + // considerable length of time, then this ensures best-effort timing between invocations. + entry->trigger_time += delay_ms; + } else { + // If it was zero, then the callback is cancelling repeated execution. Free up the slot. + entry->token = INVALID_DEFERRED_TOKEN; + entry->trigger_time = 0; + entry->callback = NULL; + entry->cb_arg = NULL; + } + } + } + } +} diff --git a/quantum/deferred_exec.h b/quantum/deferred_exec.h new file mode 100644 index 0000000000..f80d353169 --- /dev/null +++ b/quantum/deferred_exec.h @@ -0,0 +1,38 @@ +// Copyright 2021 Nick Brassel (@tzarc) +// SPDX-License-Identifier: GPL-2.0-or-later + +#pragma once + +#include +#include + +// A token that can be used to cancel an existing deferred execution. +typedef uint8_t deferred_token; +#define INVALID_DEFERRED_TOKEN 0 + +// Callback to execute. +// -- Parameter trigger_time: the intended trigger time to execute the callback -- equivalent time-space as timer_read32() +// cb_arg: the callback argument specified when enqueueing the deferred executor +// -- Return value: Non-zero re-queues the callback to execute after the returned number of milliseconds. Zero cancels repeated execution. +typedef uint32_t (*deferred_exec_callback)(uint32_t trigger_time, void *cb_arg); + +// Configures the supplied deferred executor to be executed after the required number of milliseconds. +// -- Parameter delay_ms: the number of milliseconds before executing the callback +// -- callback: the executor to invoke +// -- cb_arg: the argument to pass to the executor, may be NULL if unused by the executor +// -- Return value: a token usable for cancellation, or INVALID_DEFERRED_TOKEN if an error occurred +deferred_token defer_exec(uint32_t delay_ms, deferred_exec_callback callback, void *cb_arg); + +// Allows for extending the timeframe before an existing deferred execution is invoked. +// -- Parameter token: the returned value from defer_exec for the deferred execution you wish to extend. +// -- delay_ms: the new delay (with respect to the current time) +// -- Return value: if the token was found, and the delay was extended +bool extend_deferred_exec(deferred_token token, uint32_t delay_ms); + +// Allows for cancellation of an existing deferred execution. +// -- Parameter token: the returned value from defer_exec for the deferred execution you wish to cancel. +// -- Return value: if the token was found, and the executor was cancelled +bool cancel_deferred_exec(deferred_token token); + +// Forward declaration for the main loop in order to execute any deferred executors. Should not be invoked by keyboard/user code. +void deferred_exec_task(void); diff --git a/quantum/main.c b/quantum/main.c index 3814d371c1..6ed6b95741 100644 --- a/quantum/main.c +++ b/quantum/main.c @@ -43,6 +43,10 @@ void protocol_task(void) { protocol_post_task(); } +#ifdef DEFERRED_EXEC_ENABLE +void deferred_exec_task(void); +#endif // DEFERRED_EXEC_ENABLE + /** \brief Main * * FIXME: Needs doc @@ -58,6 +62,12 @@ int main(void) { /* Main loop */ while (true) { protocol_task(); + +#ifdef DEFERRED_EXEC_ENABLE + // Run deferred executions + deferred_exec_task(); +#endif // DEFERRED_EXEC_ENABLE + housekeeping_task(); } } diff --git a/quantum/quantum.h b/quantum/quantum.h index e6015adbe9..b34ff6ec51 100644 --- a/quantum/quantum.h +++ b/quantum/quantum.h @@ -54,6 +54,10 @@ #include #include +#ifdef DEFERRED_EXEC_ENABLE +# include "deferred_exec.h" +#endif + extern layer_state_t default_layer_state; #ifndef NO_ACTION_LAYER diff --git a/tmk_core/protocol/arm_atsam/main_arm_atsam.c b/tmk_core/protocol/arm_atsam/main_arm_atsam.c index 1df5112ed8..de12821a74 100644 --- a/tmk_core/protocol/arm_atsam/main_arm_atsam.c +++ b/tmk_core/protocol/arm_atsam/main_arm_atsam.c @@ -40,6 +40,10 @@ void send_mouse(report_mouse_t *report); void send_system(uint16_t data); void send_consumer(uint16_t data); +#ifdef DEFERRED_EXEC_ENABLE +void deferred_exec_task(void); +#endif // DEFERRED_EXEC_ENABLE + host_driver_t arm_atsam_driver = {keyboard_leds, send_keyboard, send_mouse, send_system, send_consumer}; uint8_t led_states; @@ -360,6 +364,11 @@ int main(void) { } #endif // CONSOLE_ENABLE +#ifdef DEFERRED_EXEC_ENABLE + // Run deferred executions + deferred_exec_task(); +#endif // DEFERRED_EXEC_ENABLE + // Run housekeeping housekeeping_task(); } From c9fd69871165eb889be5421df518d8e35b2be027 Mon Sep 17 00:00:00 2001 From: vectorstorm Date: Tue, 16 Nov 2021 05:40:52 +1100 Subject: [PATCH 489/595] Reimplements WPM feature to be smaller & precise (#13902) * Reimplements WPM feature. - Now calculates exact WPM over the last up to three seconds of typing. - WPM_SMOOTHING removed, as it's no longer needed. - WPM_SAMPLE_SECONDS added, to specify how long a period to average WPM over, set to 5 seconds by default. - WPM_SAMPLE_PERIODS added, to specify how many sampling buffers we'll use. Each one uses one extra byte of space. Having more will lead to smoother decay of WPM values. Defaults to 50 (we're saving so many bytes of firmware space I felt like being extravagent, and this change is still a big size saving overall) - WPM_UNFILTERED option added (defaults to unset), which disables all filtering within the WPM feature. This saves some space in the firmware and also reduces latency between typing and the WPM calculation measuring it. (saves 70 bytes in my tests) - WPM_LAUNCH_CONTROL added (defaults to unset). When typing begins while the current displayed WPM value is zero, the WPM calculation only considers the time elapsed since typing began, not the whole WPM_SAMPLE_SECONDS buffer. The result of this is that the displayed WPM value much more rapidly reaches an accurate WPM value, even when results are being filtered. (costs 22 bytes in my tests) - Updates documentation to reflect changed options. Saves about 900 bytes, in my tests, compared against the previous implementation, with default settings. * Apply suggestions from code review Co-authored-by: Sergey Vlasov Co-authored-by: Trevor Powell Co-authored-by: Nick Brassel Co-authored-by: Sergey Vlasov --- docs/feature_wpm.md | 22 +++++++--- quantum/wpm.c | 98 +++++++++++++++++++++++++++++++++++---------- quantum/wpm.h | 7 +++- 3 files changed, 99 insertions(+), 28 deletions(-) diff --git a/docs/feature_wpm.md b/docs/feature_wpm.md index 7e465e79b9..87145c97e3 100644 --- a/docs/feature_wpm.md +++ b/docs/feature_wpm.md @@ -10,11 +10,23 @@ For split keyboards using soft serial, the computed WPM score will be available ## Configuration -|Define |Default | Description | -|-----------------------------|--------------|------------------------------------------------------------------------------------------| -|`WPM_SMOOTHING` |`0.0487` | Sets the smoothing to about 40 keystrokes | -|`WPM_ESTIMATED_WORD_SIZE` |`5` | This is the value used when estimating average word size (for regression and normal use) | -|`WPM_ALLOW_COUNT_REGRESSOIN` |_Not defined_ | If defined allows the WPM to be decreased when hitting Delete or Backspace | +| Define | Default | Description | +|------------------------------|---------------|------------------------------------------------------------------------------------------| +| `WPM_ESTIMATED_WORD_SIZE` | `5` | This is the value used when estimating average word size (for regression and normal use) | +| `WPM_ALLOW_COUNT_REGRESSION` | _Not defined_ | If defined allows the WPM to be decreased when hitting Delete or Backspace | +| `WPM_UNFILTERED` | _Not defined_ | If undefined (the default), WPM values will be smoothed to avoid sudden changes in value | +| `WPM_SAMPLE_SECONDS` | `5` | This defines how many seconds of typing to average, when calculating WPM | +| `WPM_SAMPLE_PERIODS` | `50` | This defines how many sampling periods to use when calculating WPM | +| `WPM_LAUNCH_CONTROL` | _Not defined_ | If defined, WPM values will be calculated using partial buffers when typing begins | + +'WPM_UNFILTERED' is potentially useful if you're filtering data in some other way (and also because it reduces the code required for the WPM feature), or if reducing measurement latency to a minimum is important for you. + +Increasing 'WPM_SAMPLE_SECONDS' will give more smoothly changing WPM values at the expense of slightly more latency to the WPM calculation. + +Increasing 'WPM_SAMPLE_PERIODS' will improve the smoothness at which WPM decays once typing stops, at a cost of approximately this many bytes of firmware space. + +If 'WPM_LAUNCH_CONTROL' is defined, whenever WPM drops to zero, the next time typing begins WPM will be calculated based only on the time since that typing began, instead of the whole period of time specified by WPM_SAMPLE_SECONDS. This results in reaching an accurate WPM value much faster, even when filtering is enabled and a large WPM_SAMPLE_SECONDS value is specified. + ## Public Functions |Function |Description | diff --git a/quantum/wpm.c b/quantum/wpm.c index cad4cefd5d..925e2c416e 100644 --- a/quantum/wpm.c +++ b/quantum/wpm.c @@ -21,13 +21,37 @@ // WPM Stuff static uint8_t current_wpm = 0; -static uint16_t wpm_timer = 0; +static uint32_t wpm_timer = 0; +#ifndef WPM_UNFILTERED +static uint32_t smoothing_timer = 0; +#endif -// This smoothing is 40 keystrokes -static const float wpm_smoothing = WPM_SMOOTHING; +/* The WPM calculation works by specifying a certain number of 'periods' inside + * a ring buffer, and we count the number of keypresses which occur in each of + * those periods. Then to calculate WPM, we add up all of the keypresses in + * the whole ring buffer, divide by the number of keypresses in a 'word', and + * then adjust for how much time is captured by our ring buffer. Right now + * the ring buffer is hardcoded below to be six half-second periods, accounting + * for a total WPM sampling period of up to three seconds of typing. + * + * Whenever our WPM drops to absolute zero due to no typing occurring within + * any contiguous three seconds, we reset and start measuring fresh, + * which lets our WPM immediately reach the correct value even before a full + * three second sampling buffer has been filled. + */ +#define MAX_PERIODS (WPM_SAMPLE_PERIODS) +#define PERIOD_DURATION (1000 * WPM_SAMPLE_SECONDS / MAX_PERIODS) +#define LATENCY (100) +static int8_t period_presses[MAX_PERIODS] = {0}; +static uint8_t current_period = 0; +static uint8_t periods = 1; -void set_current_wpm(uint8_t new_wpm) { current_wpm = new_wpm; } +#if !defined(WPM_UNFILTERED) +static uint8_t prev_wpm = 0; +static uint8_t next_wpm = 0; +#endif +void set_current_wpm(uint8_t new_wpm) { current_wpm = new_wpm; } uint8_t get_current_wpm(void) { return current_wpm; } bool wpm_keycode(uint16_t keycode) { return wpm_keycode_kb(keycode); } @@ -68,33 +92,65 @@ __attribute__((weak)) uint8_t wpm_regress_count(uint16_t keycode) { } #endif +// Outside 'raw' mode we smooth results over time. + void update_wpm(uint16_t keycode) { if (wpm_keycode(keycode)) { - if (wpm_timer > 0) { - uint16_t latest_wpm = 60000 / timer_elapsed(wpm_timer) / WPM_ESTIMATED_WORD_SIZE; - if (latest_wpm > UINT8_MAX) { - latest_wpm = UINT8_MAX; - } - current_wpm += ceilf((latest_wpm - current_wpm) * wpm_smoothing); - } - wpm_timer = timer_read(); + period_presses[current_period]++; } #ifdef WPM_ALLOW_COUNT_REGRESSION uint8_t regress = wpm_regress_count(keycode); if (regress) { - if (current_wpm < regress) { - current_wpm = 0; - } else { - current_wpm -= regress; - } - wpm_timer = timer_read(); + period_presses[current_period]--; } #endif } void decay_wpm(void) { - if (timer_elapsed(wpm_timer) > 1000) { - current_wpm += (-current_wpm) * wpm_smoothing; - wpm_timer = timer_read(); + int32_t presses = period_presses[0]; + for (int i = 1; i <= periods; i++) { + presses += period_presses[i]; + } + if (presses < 0) { + presses = 0; } + int32_t elapsed = timer_elapsed32(wpm_timer); + uint32_t duration = (((periods)*PERIOD_DURATION) + elapsed); + uint32_t wpm_now = (60000 * presses) / (duration * WPM_ESTIMATED_WORD_SIZE); + wpm_now = (wpm_now > 240) ? 240 : wpm_now; + + if (elapsed > PERIOD_DURATION) { + current_period = (current_period + 1) % MAX_PERIODS; + period_presses[current_period] = 0; + periods = (periods < MAX_PERIODS - 1) ? periods + 1 : MAX_PERIODS - 1; + elapsed = 0; + /* if (wpm_timer == 0) { */ + wpm_timer = timer_read32(); + /* } else { */ + /* wpm_timer += PERIOD_DURATION; */ + /* } */ + } + if (presses < 2) // don't guess high WPM based on a single keypress. + wpm_now = 0; + +#if defined WPM_LAUNCH_CONTROL + if (presses == 0) { + current_period = 0; + periods = 0; + wpm_now = 0; + } +#endif // WPM_LAUNCH_CONTROL + +#ifndef WPM_UNFILTERED + int32_t latency = timer_elapsed32(smoothing_timer); + if (latency > LATENCY) { + smoothing_timer = timer_read32(); + prev_wpm = current_wpm; + next_wpm = wpm_now; + } + + current_wpm = prev_wpm + (latency * ((int)next_wpm - (int)prev_wpm) / LATENCY); +#else + current_wpm = wpm_now; +#endif } diff --git a/quantum/wpm.h b/quantum/wpm.h index 4af52d2b98..c8e7d26684 100644 --- a/quantum/wpm.h +++ b/quantum/wpm.h @@ -22,8 +22,11 @@ #ifndef WPM_ESTIMATED_WORD_SIZE # define WPM_ESTIMATED_WORD_SIZE 5 #endif -#ifndef WPM_SMOOTHING -# define WPM_SMOOTHING 0.0487 +#ifndef WPM_SAMPLE_SECONDS +# define WPM_SAMPLE_SECONDS 5 +#endif +#ifndef WPM_SAMPLE_PERIODS +# define WPM_SAMPLE_PERIODS 50 #endif bool wpm_keycode(uint16_t keycode); From 160b0558f55f1357e1a48175c949e98d32630e6b Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Mon, 15 Nov 2021 10:41:04 -0800 Subject: [PATCH 490/595] Require explicit enabling of RGB Matrix modes (#15018) --- docs/feature_led_matrix.md | 40 ++--- docs/feature_rgb_matrix.md | 107 ++++++------ keyboards/1upkeyboards/super16/config.h | 48 ++++++ keyboards/3keyecosystem/2key2/config.h | 47 +++++- keyboards/basekeys/trifecta/config.h | 77 +++++---- keyboards/bastardkb/scylla/config.h | 48 ++++++ keyboards/bastardkb/skeletyl/config.h | 48 ++++++ keyboards/bastardkb/tbkmini/config.h | 48 ++++++ keyboards/boardsource/beiwagon/config.h | 50 +++++- keyboards/boardsource/technik_o/config.h | 52 +++++- keyboards/boardsource/technik_s/config.h | 52 +++++- .../capsunlocked/cu80/v2_ansi/rgb/config.h | 48 ++++++ .../capsunlocked/cu80/v2_iso/rgb/config.h | 48 ++++++ keyboards/clueboard/66_hotswap/gen1/config.h | 26 +++ keyboards/crkbd/keymaps/davidrambo/config.h | 78 +++++---- keyboards/crkbd/keymaps/devdev/config.h | 78 +++++---- keyboards/crkbd/keymaps/dsanchezseco/config.h | 83 ++++++---- keyboards/crkbd/keymaps/gotham/config.h | 72 ++++----- keyboards/crkbd/keymaps/kidbrazil/config.h | 84 +++++----- keyboards/crkbd/keymaps/mcrown/config.h | 84 +++++----- keyboards/crkbd/keymaps/ninjonas/config.h | 86 +++++----- keyboards/crkbd/keymaps/rpbaptist/config.h | 78 ++++----- keyboards/crkbd/keymaps/rpbaptist/readme.md | 2 +- keyboards/crkbd/keymaps/soundmonster/config.h | 72 ++++----- keyboards/crkbd/readme.md | 76 +++++---- keyboards/dekunukem/duckypad/config.h | 49 +++++- keyboards/doro67/rgb/config.h | 48 ++++++ keyboards/dp60/config.h | 48 ++++++ keyboards/dtisaac/dosa40rgb/config.h | 47 +++++- keyboards/durgod/dgk6x/config.h | 51 +++++- .../dztech/dz60rgb/keymaps/kgreulich/config.h | 74 ++++----- .../dz60rgb/keymaps/matthewrobo/config.h | 74 ++++----- .../dztech/dz60rgb/keymaps/piv3rt/config.h | 72 ++++----- keyboards/dztech/dz60rgb/keymaps/via/config.h | 6 +- .../dztech/dz60rgb/keymaps/xunz/config.h | 75 +++++---- keyboards/dztech/dz60rgb/v1/config.h | 52 +++++- keyboards/dztech/dz60rgb/v2/config.h | 64 ++++++-- keyboards/dztech/dz60rgb/v2_1/config.h | 64 ++++++-- keyboards/dztech/dz60rgb_ansi/v1/config.h | 52 +++++- keyboards/dztech/dz60rgb_ansi/v2/config.h | 64 ++++++-- keyboards/dztech/dz60rgb_ansi/v2_1/config.h | 64 ++++++-- keyboards/dztech/dz60rgb_wkl/v1/config.h | 52 +++++- keyboards/dztech/dz60rgb_wkl/v2/config.h | 64 ++++++-- keyboards/dztech/dz60rgb_wkl/v2_1/config.h | 64 ++++++-- .../dztech/dz65rgb/keymaps/drootz/config.h | 54 +++---- .../dztech/dz65rgb/keymaps/jumper149/config.h | 72 ++++----- .../dz65rgb/keymaps/matthewrobo/config.h | 74 ++++----- keyboards/dztech/dz65rgb/keymaps/via/config.h | 6 +- keyboards/dztech/dz65rgb/v1/config.h | 64 ++++++-- keyboards/dztech/dz65rgb/v2/config.h | 64 ++++++-- keyboards/dztech/dz65rgb/v3/config.h | 49 ++++++ keyboards/ergodox_ez/config.h | 48 ++++++ keyboards/ergodox_infinity/config.h | 26 +++ keyboards/evyd13/atom47/rev5/config.h | 50 +++++- keyboards/ferris/0_2/bling/config.h | 48 ++++++ keyboards/geekboards/macropad_v2/config.h | 73 ++++++--- keyboards/geekboards/tester/config.h | 65 ++++++-- .../pro/ansi/keymaps/stickandgum/config.h | 82 +++++----- keyboards/gmmk/pro/config.h | 49 ++++++ keyboards/handwired/colorlice/config.h | 49 ++++++ keyboards/handwired/hnah108/config.h | 48 ++++++ keyboards/handwired/hnah40rgb/config.h | 48 ++++++ keyboards/handwired/p65rgb/config.h | 48 ++++++ keyboards/hs60/v1/config.h | 49 ++++++ keyboards/hub20/config.h | 91 ++++++----- keyboards/inett_studio/sqx/hotswap/config.h | 51 +++++- keyboards/inett_studio/sqx/universal/config.h | 51 +++++- keyboards/kbdfans/bella/rgb/config.h | 51 +++++- keyboards/kbdfans/bella/rgb_iso/config.h | 51 +++++- keyboards/kbdfans/boop65/rgb/config.h | 46 +++++- keyboards/kbdfans/kbd67/mkiirgb/v1/config.h | 65 ++++++-- keyboards/kbdfans/kbd67/mkiirgb/v2/config.h | 80 ++++++--- keyboards/kbdfans/kbd67/mkiirgb/v3/config.h | 67 +++++--- keyboards/kbdfans/kbdmini/config.h | 64 ++++++-- keyboards/kbdfans/maja/config.h | 65 ++++++-- keyboards/keebio/bdn9/rev2/config.h | 48 ++++++ keyboards/keebio/stick/config.h | 48 ++++++ keyboards/keyboardio/model01/config.h | 49 ++++++ keyboards/keychron/q1/config.h | 63 ++++++-- keyboards/kprepublic/bm40hsrgb/config.h | 48 ++++++ .../bm40hsrgb/keymaps/gabustoledo/config.h | 66 ++++---- .../bm40hsrgb/keymaps/signynt/config.h | 76 ++++----- .../bm40hsrgb/keymaps/signynt_2_loud/config.h | 76 ++++----- .../keymaps/signynt_2_quiet/config.h | 76 ++++----- keyboards/kprepublic/bm60poker/rev1/config.h | 48 ++++++ keyboards/kprepublic/bm60rgb/rev1/config.h | 50 +++++- .../kprepublic/bm60rgb_iso/rev1/config.h | 48 ++++++ keyboards/kprepublic/bm65iso/config.h | 75 +++++++-- keyboards/kprepublic/bm68rgb/config.h | 48 ++++++ .../bm68rgb/keymaps/peepeetee/config.h | 78 ++++----- keyboards/kprepublic/bm80/config.h | 49 +++++- keyboards/latin17rgb/config.h | 89 ++++++---- keyboards/latin60rgb/config.h | 63 ++++++-- keyboards/latin6rgb/config.h | 63 ++++++-- keyboards/latinpad/config.h | 48 ++++++ keyboards/latinpadble/config.h | 74 +++++---- keyboards/le_chiffre/config.h | 49 ++++++ keyboards/marksard/rhymestone/rev1/config.h | 82 +++++----- keyboards/massdrop/alt/config.h | 48 ++++++ .../massdrop/alt/keymaps/pregame/config.h | 74 ++++----- keyboards/massdrop/ctrl/config.h | 48 ++++++ .../massdrop/ctrl/keymaps/endgame/config.h | 74 ++++----- .../ctrl/keymaps/matthewrobo/config.h | 74 ++++----- keyboards/matrix/noah/config.h | 48 ++++++ .../mechlovin/adelais/rgb_led/rev1/config.h | 50 +++++- .../mechlovin/adelais/rgb_led/rev2/config.h | 48 ++++++ .../mechlovin/adelais/rgb_led/rev3/config.h | 47 +++++- keyboards/mechlovin/delphine/rgb_led/config.h | 48 ++++++ keyboards/mechlovin/hannah60rgb/rev1/config.h | 48 ++++++ keyboards/mechlovin/hannah60rgb/rev2/config.h | 48 ++++++ .../mechlovin/infinity87/rgb_rev1/config.h | 54 ++++++- keyboards/melgeek/mach80/config.h | 44 +++++ keyboards/melgeek/mj61/config.h | 51 +++++- keyboards/melgeek/mj63/config.h | 51 +++++- keyboards/melgeek/mj64/config.h | 51 +++++- keyboards/melgeek/mj65/config.h | 51 +++++- keyboards/melgeek/mojo68/config.h | 51 +++++- keyboards/melgeek/mojo75/config.h | 51 +++++- keyboards/melgeek/z70ultra/config.h | 51 +++++- keyboards/miller/gm862/config.h | 64 ++++++-- keyboards/monstargear/xo87/rgb/config.h | 48 ++++++ keyboards/moonlander/config.h | 48 ++++++ keyboards/mt64rgb/config.h | 99 ++++++++---- keyboards/mt84/config.h | 107 +++++++----- keyboards/mwstudio/mw75/config.h | 58 +++++-- keyboards/nack/config.h | 49 ++++++ keyboards/opendeck/32/rev1/config.h | 48 ++++++ keyboards/owlab/voice65/hotswap/config.h | 48 ++++++ keyboards/owlab/voice65/soldered/config.h | 49 ++++++ keyboards/percent/canoe_gen2/config.h | 48 ++++++ keyboards/planck/ez/config.h | 49 +++++- keyboards/planck/keymaps/buffet/config.h | 74 ++++----- keyboards/planck/light/config.h | 66 +++++++- keyboards/rgbkb/mun/config.h | 48 ++++++ keyboards/rgbkb/mun/keymaps/default/config.h | 10 +- keyboards/rgbkb/mun/keymaps/via/config.h | 10 +- keyboards/rgbkb/mun/keymaps/xulkal2/config.h | 10 +- keyboards/rgbkb/pan/config.h | 49 ++++++ keyboards/rgbkb/sol/config.h | 48 ++++++ keyboards/sawnsprojects/satxri6key/config.h | 45 ++++++ keyboards/smallkeyboard/config.h | 87 ++++++---- keyboards/sofle/keymaps/devdev/config.h | 56 +++---- keyboards/sofle/keymaps/rgb_default/config.h | 56 +++---- keyboards/sowbug/68keys/config.h | 48 ++++++ keyboards/sowbug/ansi_tkl/config.h | 49 ++++++ keyboards/terrazzo/config.h | 46 +++--- keyboards/tkc/portico/config.h | 34 ++-- keyboards/ungodly/launch_pad/config.h | 86 +++++----- keyboards/wekey/we27/config.h | 102 ++++++------ keyboards/work_louder/loop/config.h | 49 ++++++ keyboards/work_louder/nano/config.h | 49 ++++++ keyboards/work_louder/work_board/config.h | 49 ++++++ keyboards/xbows/knight/config.h | 49 ++++++ .../xbows/knight/keymaps/default/config.h | 47 +++--- keyboards/xbows/knight/keymaps/via/config.h | 81 +++++----- keyboards/xbows/knight_plus/config.h | 49 ++++++ .../knight_plus/keymaps/default/config.h | 47 +++--- .../xbows/knight_plus/keymaps/via/config.h | 81 +++++----- keyboards/xbows/nature/config.h | 75 +++++---- keyboards/xbows/numpad/config.h | 49 ++++++ .../xbows/numpad/keymaps/default/config.h | 50 +++--- keyboards/xbows/numpad/keymaps/via/config.h | 81 +++++----- keyboards/xbows/ranger/config.h | 50 ++++++ .../xbows/ranger/keymaps/default/config.h | 46 +++--- keyboards/xbows/ranger/keymaps/via/config.h | 81 +++++----- keyboards/xbows/woody/config.h | 77 ++++++--- keyboards/xelus/dawn60/rev1_qmk/config.h | 49 ++++++ keyboards/xelus/pachi/rgb/config.h | 48 ++++++ keyboards/xelus/valor/rev2/config.h | 49 ++++++ keyboards/yncognito/batpad/config.h | 49 ++++++ .../65_ansi_blocker/brandonschlack/config.h | 76 ++++----- .../brandonschlack-split/config.h | 76 ++++----- .../led_matrix/animations/alpha_mods_anim.h | 2 +- quantum/led_matrix/animations/band_anim.h | 2 +- .../animations/band_pinwheel_anim.h | 2 +- .../led_matrix/animations/band_spiral_anim.h | 2 +- .../led_matrix/animations/breathing_anim.h | 2 +- .../animations/cycle_left_right_anim.h | 2 +- .../led_matrix/animations/cycle_out_in_anim.h | 2 +- .../animations/cycle_up_down_anim.h | 2 +- .../led_matrix/animations/dual_beacon_anim.h | 2 +- .../animations/solid_reactive_cross.h | 4 +- .../animations/solid_reactive_nexus.h | 2 +- .../animations/solid_reactive_simple_anim.h | 2 +- .../animations/solid_reactive_wide.h | 4 +- .../led_matrix/animations/solid_splash_anim.h | 4 +- .../animations/wave_left_right_anim.h | 2 +- .../led_matrix/animations/wave_up_down_anim.h | 2 +- quantum/led_matrix/led_matrix.c | 4 +- quantum/led_matrix/led_matrix.h | 1 - .../led_matrix/led_matrix_legacy_enables.h | 82 ---------- .../rgb_matrix/animations/alpha_mods_anim.h | 2 +- .../rgb_matrix/animations/breathing_anim.h | 2 +- .../animations/colorband_pinwheel_sat_anim.h | 2 +- .../animations/colorband_pinwheel_val_anim.h | 2 +- .../animations/colorband_sat_anim.h | 2 +- .../animations/colorband_spiral_sat_anim.h | 2 +- .../animations/colorband_spiral_val_anim.h | 2 +- .../animations/colorband_val_anim.h | 2 +- .../rgb_matrix/animations/cycle_all_anim.h | 2 +- .../animations/cycle_left_right_anim.h | 2 +- .../rgb_matrix/animations/cycle_out_in_anim.h | 2 +- .../animations/cycle_out_in_dual_anim.h | 2 +- .../animations/cycle_pinwheel_anim.h | 2 +- .../rgb_matrix/animations/cycle_spiral_anim.h | 2 +- .../animations/cycle_up_down_anim.h | 2 +- .../rgb_matrix/animations/digital_rain_anim.h | 4 +- .../rgb_matrix/animations/dual_beacon_anim.h | 2 +- .../animations/gradient_left_right_anim.h | 2 +- .../animations/gradient_up_down_anim.h | 2 +- .../animations/jellybean_raindrops_anim.h | 2 +- .../animations/rainbow_beacon_anim.h | 2 +- .../animations/rainbow_moving_chevron_anim.h | 2 +- .../animations/rainbow_pinwheels_anim.h | 2 +- .../rgb_matrix/animations/raindrops_anim.h | 2 +- .../animations/solid_reactive_anim.h | 4 +- .../animations/solid_reactive_cross.h | 12 +- .../animations/solid_reactive_nexus.h | 12 +- .../animations/solid_reactive_simple_anim.h | 4 +- .../animations/solid_reactive_wide.h | 12 +- .../rgb_matrix/animations/solid_splash_anim.h | 12 +- quantum/rgb_matrix/animations/splash_anim.h | 12 +- .../animations/typing_heatmap_anim.h | 2 +- quantum/rgb_matrix/rgb_matrix.h | 1 - .../rgb_matrix/rgb_matrix_legacy_enables.h | 153 ------------------ users/curry/config.h | 72 ++++----- users/drashna/config.h | 143 ++++++++++------ users/dshields/config.h | 82 +++++----- users/tominabox1/config.h | 54 +++---- users/xulkal/config.h | 10 +- 230 files changed, 7843 insertions(+), 2801 deletions(-) delete mode 100644 quantum/led_matrix/led_matrix_legacy_enables.h delete mode 100644 quantum/rgb_matrix/rgb_matrix_legacy_enables.h diff --git a/docs/feature_led_matrix.md b/docs/feature_led_matrix.md index d4b20b9aa2..d96199a3c7 100644 --- a/docs/feature_led_matrix.md +++ b/docs/feature_led_matrix.md @@ -166,26 +166,26 @@ You can disable a single effect by defining `DISABLE_[EFFECT_NAME]` in your `con |Define |Description | |-------------------------------------------------------|-----------------------------------------------| -|`#define DISABLE_LED_MATRIX_ALPHAS_MODS` |Disables `LED_MATRIX_ALPHAS_MODS` | -|`#define DISABLE_LED_MATRIX_BREATHING` |Disables `LED_MATRIX_BREATHING` | -|`#define DISABLE_LED_MATRIX_BAND` |Disables `LED_MATRIX_BAND` | -|`#define DISABLE_LED_MATRIX_BAND_PINWHEEL` |Disables `LED_MATRIX_BAND_PINWHEEL` | -|`#define DISABLE_LED_MATRIX_BAND_SPIRAL` |Disables `LED_MATRIX_BAND_SPIRAL` | -|`#define DISABLE_LED_MATRIX_CYCLE_LEFT_RIGHT` |Disables `LED_MATRIX_CYCLE_LEFT_RIGHT` | -|`#define DISABLE_LED_MATRIX_CYCLE_UP_DOWN` |Disables `LED_MATRIX_CYCLE_UP_DOWN` | -|`#define DISABLE_LED_MATRIX_CYCLE_OUT_IN` |Disables `LED_MATRIX_CYCLE_OUT_IN` | -|`#define DISABLE_LED_MATRIX_DUAL_BEACON` |Disables `LED_MATRIX_DUAL_BEACON` | -|`#define DISABLE_LED_MATRIX_SOLID_REACTIVE_SIMPLE` |Disables `LED_MATRIX_SOLID_REACTIVE_SIMPLE` | -|`#define DISABLE_LED_MATRIX_SOLID_REACTIVE_WIDE` |Disables `LED_MATRIX_SOLID_REACTIVE_WIDE` | -|`#define DISABLE_LED_MATRIX_SOLID_REACTIVE_MULTIWIDE` |Disables `LED_MATRIX_SOLID_REACTIVE_MULTIWIDE` | -|`#define DISABLE_LED_MATRIX_SOLID_REACTIVE_CROSS` |Disables `LED_MATRIX_SOLID_REACTIVE_CROSS` | -|`#define DISABLE_LED_MATRIX_SOLID_REACTIVE_MULTICROSS` |Disables `LED_MATRIX_SOLID_REACTIVE_MULTICROSS`| -|`#define DISABLE_LED_MATRIX_SOLID_REACTIVE_NEXUS` |Disables `LED_MATRIX_SOLID_REACTIVE_NEXUS` | -|`#define DISABLE_LED_MATRIX_SOLID_REACTIVE_MULTINEXUS` |Disables `LED_MATRIX_SOLID_REACTIVE_MULTINEXUS`| -|`#define DISABLE_LED_MATRIX_SOLID_SPLASH` |Disables `LED_MATRIX_SOLID_SPLASH` | -|`#define DISABLE_LED_MATRIX_SOLID_MULTISPLASH` |Disables `LED_MATRIX_SOLID_MULTISPLASH` | -|`#define DISABLE_LED_MATRIX_WAVE_LEFT_RIGHT` |Disables `LED_MATRIX_WAVE_LEFT_RIGHT` | -|`#define DISABLE_LED_MATRIX_WAVE_UP_DOWN` |Disables `LED_MATRIX_WAVE_UP_DOWN` | +|`#define ENABLE_LED_MATRIX_ALPHAS_MODS` |Enables `LED_MATRIX_ALPHAS_MODS` | +|`#define ENABLE_LED_MATRIX_BREATHING` |Enables `LED_MATRIX_BREATHING` | +|`#define ENABLE_LED_MATRIX_BAND` |Enables `LED_MATRIX_BAND` | +|`#define ENABLE_LED_MATRIX_BAND_PINWHEEL` |Enables `LED_MATRIX_BAND_PINWHEEL` | +|`#define ENABLE_LED_MATRIX_BAND_SPIRAL` |Enables `LED_MATRIX_BAND_SPIRAL` | +|`#define ENABLE_LED_MATRIX_CYCLE_LEFT_RIGHT` |Enables `LED_MATRIX_CYCLE_LEFT_RIGHT` | +|`#define ENABLE_LED_MATRIX_CYCLE_UP_DOWN` |Enables `LED_MATRIX_CYCLE_UP_DOWN` | +|`#define ENABLE_LED_MATRIX_CYCLE_OUT_IN` |Enables `LED_MATRIX_CYCLE_OUT_IN` | +|`#define ENABLE_LED_MATRIX_DUAL_BEACON` |Enables `LED_MATRIX_DUAL_BEACON` | +|`#define ENABLE_LED_MATRIX_SOLID_REACTIVE_SIMPLE` |Enables `LED_MATRIX_SOLID_REACTIVE_SIMPLE` | +|`#define ENABLE_LED_MATRIX_SOLID_REACTIVE_WIDE` |Enables `LED_MATRIX_SOLID_REACTIVE_WIDE` | +|`#define ENABLE_LED_MATRIX_SOLID_REACTIVE_MULTIWIDE` |Enables `LED_MATRIX_SOLID_REACTIVE_MULTIWIDE` | +|`#define ENABLE_LED_MATRIX_SOLID_REACTIVE_CROSS` |Enables `LED_MATRIX_SOLID_REACTIVE_CROSS` | +|`#define ENABLE_LED_MATRIX_SOLID_REACTIVE_MULTICROSS` |Enables `LED_MATRIX_SOLID_REACTIVE_MULTICROSS`| +|`#define ENABLE_LED_MATRIX_SOLID_REACTIVE_NEXUS` |Enables `LED_MATRIX_SOLID_REACTIVE_NEXUS` | +|`#define ENABLE_LED_MATRIX_SOLID_REACTIVE_MULTINEXUS` |Enables `LED_MATRIX_SOLID_REACTIVE_MULTINEXUS`| +|`#define ENABLE_LED_MATRIX_SOLID_SPLASH` |Enables `LED_MATRIX_SOLID_SPLASH` | +|`#define ENABLE_LED_MATRIX_SOLID_MULTISPLASH` |Enables `LED_MATRIX_SOLID_MULTISPLASH` | +|`#define ENABLE_LED_MATRIX_WAVE_LEFT_RIGHT` |Enables `LED_MATRIX_WAVE_LEFT_RIGHT` | +|`#define ENABLE_LED_MATRIX_WAVE_UP_DOWN` |Enables `LED_MATRIX_WAVE_UP_DOWN` | ## Custom LED Matrix Effects :id=custom-led-matrix-effects diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md index 2b9ee5c520..3e1d73de15 100644 --- a/docs/feature_rgb_matrix.md +++ b/docs/feature_rgb_matrix.md @@ -477,53 +477,66 @@ enum rgb_matrix_effects { }; ``` -You can disable a single effect by defining `DISABLE_[EFFECT_NAME]` in your `config.h`: - - -|Define |Description | -|-------------------------------------------------------|-----------------------------------------------| -|`#define DISABLE_RGB_MATRIX_ALPHAS_MODS` |Disables `RGB_MATRIX_ALPHAS_MODS` | -|`#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN` |Disables `RGB_MATRIX_GRADIENT_UP_DOWN` | -|`#define DISABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT` |Disables `MATRIX_GRADIENT_LEFT_RIGHT` | -|`#define DISABLE_RGB_MATRIX_BREATHING` |Disables `RGB_MATRIX_BREATHING` | -|`#define DISABLE_RGB_MATRIX_BAND_SAT` |Disables `RGB_MATRIX_BAND_SAT` | -|`#define DISABLE_RGB_MATRIX_BAND_VAL` |Disables `RGB_MATRIX_BAND_VAL` | -|`#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT` |Disables `RGB_MATRIX_BAND_PINWHEEL_SAT` | -|`#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL` |Disables `RGB_MATRIX_BAND_PINWHEEL_VAL` | -|`#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT` |Disables `RGB_MATRIX_BAND_SPIRAL_SAT` | -|`#define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL` |Disables `RGB_MATRIX_BAND_SPIRAL_VAL` | -|`#define DISABLE_RGB_MATRIX_CYCLE_ALL` |Disables `RGB_MATRIX_CYCLE_ALL` | -|`#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT` |Disables `RGB_MATRIX_CYCLE_LEFT_RIGHT` | -|`#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN` |Disables `RGB_MATRIX_CYCLE_UP_DOWN` | -|`#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON` |Disables `RGB_MATRIX_RAINBOW_MOVING_CHEVRON` | -|`#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN` |Disables `RGB_MATRIX_CYCLE_OUT_IN` | -|`#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL` |Disables `RGB_MATRIX_CYCLE_OUT_IN_DUAL` | -|`#define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL` |Disables `RGB_MATRIX_CYCLE_PINWHEEL` | -|`#define DISABLE_RGB_MATRIX_CYCLE_SPIRAL` |Disables `RGB_MATRIX_CYCLE_SPIRAL` | -|`#define DISABLE_RGB_MATRIX_DUAL_BEACON` |Disables `RGB_MATRIX_DUAL_BEACON` | -|`#define DISABLE_RGB_MATRIX_RAINBOW_BEACON` |Disables `RGB_MATRIX_RAINBOW_BEACON` | -|`#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS` |Disables `RGB_MATRIX_RAINBOW_PINWHEELS` | -|`#define DISABLE_RGB_MATRIX_RAINDROPS` |Disables `RGB_MATRIX_RAINDROPS` | -|`#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS` |Disables `RGB_MATRIX_JELLYBEAN_RAINDROPS` | -|`#define DISABLE_RGB_MATRIX_HUE_BREATHING` |Disables `RGB_MATRIX_HUE_BREATHING` | -|`#define DISABLE_RGB_MATRIX_HUE_PENDULUM` |Disables `RGB_MATRIX_HUE_PENDULUM` | -|`#define DISABLE_RGB_MATRIX_HUE_WAVE` |Disables `RGB_MATRIX_HUE_WAVE` | -|`#define DISABLE_RGB_MATRIX_FRACTAL` |Disables `RGB_MATRIX_FRACTAL` | -|`#define DISABLE_RGB_MATRIX_PIXEL_RAIN ` |Disables `RGB_MATRIX_PIXEL_RAIN ` | -|`#define DISABLE_RGB_MATRIX_TYPING_HEATMAP` |Disables `RGB_MATRIX_TYPING_HEATMAP` | -|`#define DISABLE_RGB_MATRIX_DIGITAL_RAIN` |Disables `RGB_MATRIX_DIGITAL_RAIN` | -|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE` |Disables `RGB_MATRIX_SOLID_REACTIVE_SIMPLE` | -|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE` |Disables `RGB_MATRIX_SOLID_REACTIVE` | -|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE` |Disables `RGB_MATRIX_SOLID_REACTIVE_WIDE` | -|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE` |Disables `RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE` | -|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS` |Disables `RGB_MATRIX_SOLID_REACTIVE_CROSS` | -|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS` |Disables `RGB_MATRIX_SOLID_REACTIVE_MULTICROSS`| -|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS` |Disables `RGB_MATRIX_SOLID_REACTIVE_NEXUS` | -|`#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS` |Disables `RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS`| -|`#define DISABLE_RGB_MATRIX_SPLASH` |Disables `RGB_MATRIX_SPLASH` | -|`#define DISABLE_RGB_MATRIX_MULTISPLASH` |Disables `RGB_MATRIX_MULTISPLASH` | -|`#define DISABLE_RGB_MATRIX_SOLID_SPLASH` |Disables `RGB_MATRIX_SOLID_SPLASH` | -|`#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH` |Disables `RGB_MATRIX_SOLID_MULTISPLASH` | +You can enable a single effect by defining `ENABLE_[EFFECT_NAME]` in your `config.h`: + + +|Define |Description | +|------------------------------------------------------|----------------------------------------------| +|`#define ENABLE_RGB_MATRIX_ALPHAS_MODS` |Enables `RGB_MATRIX_ALPHAS_MODS` | +|`#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN` |Enables `RGB_MATRIX_GRADIENT_UP_DOWN` | +|`#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT` |Enables `RGB_MATRIX_GRADIENT_LEFT_RIGHT` | +|`#define ENABLE_RGB_MATRIX_BREATHING` |Enables `RGB_MATRIX_BREATHING` | +|`#define ENABLE_RGB_MATRIX_BAND_SAT` |Enables `RGB_MATRIX_BAND_SAT` | +|`#define ENABLE_RGB_MATRIX_BAND_VAL` |Enables `RGB_MATRIX_BAND_VAL` | +|`#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT` |Enables `RGB_MATRIX_BAND_PINWHEEL_SAT` | +|`#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL` |Enables `RGB_MATRIX_BAND_PINWHEEL_VAL` | +|`#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT` |Enables `RGB_MATRIX_BAND_SPIRAL_SAT` | +|`#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL` |Enables `RGB_MATRIX_BAND_SPIRAL_VAL` | +|`#define ENABLE_RGB_MATRIX_CYCLE_ALL` |Enables `RGB_MATRIX_CYCLE_ALL` | +|`#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT` |Enables `RGB_MATRIX_CYCLE_LEFT_RIGHT` | +|`#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN` |Enables `RGB_MATRIX_CYCLE_UP_DOWN` | +|`#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON` |Enables `RGB_MATRIX_RAINBOW_MOVING_CHEVRON` | +|`#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN` |Enables `RGB_MATRIX_CYCLE_OUT_IN` | +|`#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL` |Enables `RGB_MATRIX_CYCLE_OUT_IN_DUAL` | +|`#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL` |Enables `RGB_MATRIX_CYCLE_PINWHEEL` | +|`#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL` |Enables `RGB_MATRIX_CYCLE_SPIRAL` | +|`#define ENABLE_RGB_MATRIX_DUAL_BEACON` |Enables `RGB_MATRIX_DUAL_BEACON` | +|`#define ENABLE_RGB_MATRIX_RAINBOW_BEACON` |Enables `RGB_MATRIX_RAINBOW_BEACON` | +|`#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS` |Enables `RGB_MATRIX_RAINBOW_PINWHEELS` | +|`#define ENABLE_RGB_MATRIX_RAINDROPS` |Enables `RGB_MATRIX_RAINDROPS` | +|`#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS` |Enables `RGB_MATRIX_JELLYBEAN_RAINDROPS` | +|`#define ENABLE_RGB_MATRIX_HUE_BREATHING` |Enables `RGB_MATRIX_HUE_BREATHING` | +|`#define ENABLE_RGB_MATRIX_HUE_PENDULUM` |Enables `RGB_MATRIX_HUE_PENDULUM` | +|`#define ENABLE_RGB_MATRIX_HUE_WAVE` |Enables `RGB_MATRIX_HUE_WAVE ` | +|`#define ENABLE_RGB_MATRIX_FRACTAL` |Enables `RGB_MATRIX_FRACTAL` | +|`#define ENABLE_RGB_MATRIX_PIXEL_RAIN` |Enables `RGB_MATRIX_PIXEL_RAIN` | + +?> These modes don't require any additional defines. + +|Framebuffer Defines |Description | +|------------------------------------------------------|----------------------------------------------| +|`#define ENABLE_RGB_MATRIX_TYPING_HEATMAP` |Enables `RGB_MATRIX_TYPING_HEATMAP` | +|`#define ENABLE_RGB_MATRIX_DIGITAL_RAIN` |Enables `RGB_MATRIX_DIGITAL_RAIN` | + +?> These modes also require the `RGB_MATRIX_FRAMEBUFFER_EFFECTS` define to be available. + +|Reactive Defines |Description | +|------------------------------------------------------|----------------------------------------------| +|`#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE` |Enables `RGB_MATRIX_SOLID_REACTIVE_SIMPLE` | +|`#define ENABLE_RGB_MATRIX_SOLID_REACTIVE` |Enables `RGB_MATRIX_SOLID_REACTIVE` | +|`#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE` |Enables `RGB_MATRIX_SOLID_REACTIVE_WIDE` | +|`#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE` |Enables `RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE` | +|`#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS` |Enables `RGB_MATRIX_SOLID_REACTIVE_CROSS` | +|`#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS` |Enables `RGB_MATRIX_SOLID_REACTIVE_MULTICROSS`| +|`#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS` |Enables `RGB_MATRIX_SOLID_REACTIVE_NEXUS` | +|`#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS` |Enables `RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS`| +|`#define ENABLE_RGB_MATRIX_SPLASH` |Enables `RGB_MATRIX_SPLASH` | +|`#define ENABLE_RGB_MATRIX_MULTISPLASH` |Enables `RGB_MATRIX_MULTISPLASH` | +|`#define ENABLE_RGB_MATRIX_SOLID_SPLASH` |Enables `RGB_MATRIX_SOLID_SPLASH` | +|`#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH` |Enables `RGB_MATRIX_SOLID_MULTISPLASH` | + +?> These modes also require the `RGB_MATRIX_KEYPRESSES` or `RGB_MATRIX_KEYRELEASES` define to be available. + ### RGB Matrix Effect Typing Heatmap :id=rgb-matrix-effect-typing-heatmap diff --git a/keyboards/1upkeyboards/super16/config.h b/keyboards/1upkeyboards/super16/config.h index 2e9312e639..c0c0a7891b 100644 --- a/keyboards/1upkeyboards/super16/config.h +++ b/keyboards/1upkeyboards/super16/config.h @@ -83,6 +83,54 @@ along with this program. If not, see . # elif defined RGB_MATRIX_ENABLE # define RGB_MATRIX_KEYPRESSES // reacts to keypresses # define RGB_MATRIX_FRAMEBUFFER_EFFECTS // reacts to keyreleases (instead of keypresses) +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH # endif #endif diff --git a/keyboards/3keyecosystem/2key2/config.h b/keyboards/3keyecosystem/2key2/config.h index 958a665edc..16cbd00a42 100644 --- a/keyboards/3keyecosystem/2key2/config.h +++ b/keyboards/3keyecosystem/2key2/config.h @@ -49,7 +49,52 @@ along with this program. If not, see . #define RGB_MATRIX_STARTUP_SPD 20 #define RGB_MATRIX_STARTUP_VAL 128 #define RGB_MATRIX_FRAMEBUFFER_EFFECTS -#define RGB_DISABLE_WHEN_USB_SUSPENDED true +#define RGB_DISABLE_WHEN_USB_SUSPENDED + +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_FRACTAL +#define ENABLE_RGB_MATRIX_PIXEL_RAIN + +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN + +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 diff --git a/keyboards/basekeys/trifecta/config.h b/keyboards/basekeys/trifecta/config.h index 28c9c18fb2..ffdf6d2d28 100644 --- a/keyboards/basekeys/trifecta/config.h +++ b/keyboards/basekeys/trifecta/config.h @@ -92,32 +92,53 @@ /* Disable the animations you don't want/need. You will need to disable a good number of these * * because they take up a lot of space. Disable until you can successfully compile your firmware. */ -// # define DISABLE_RGB_MATRIX_ALPHAS_MODS -// # define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -// # define DISABLE_RGB_MATRIX_BREATHING -// # define DISABLE_RGB_MATRIX_CYCLE_ALL -// # define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -// # define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN -// # define DISABLE_RGB_MATRIX_CYCLE_OUT_IN -// # define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -// # define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -// # define DISABLE_RGB_MATRIX_DUAL_BEACON -// # define DISABLE_RGB_MATRIX_RAINBOW_BEACON -// # define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS -// # define DISABLE_RGB_MATRIX_RAINDROPS -// # define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS -// # define DISABLE_RGB_MATRIX_TYPING_HEATMAP -// # define DISABLE_RGB_MATRIX_DIGITAL_RAIN -// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE -// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -// # define DISABLE_RGB_MATRIX_SPLASH -// # define DISABLE_RGB_MATRIX_MULTISPLASH -// # define DISABLE_RGB_MATRIX_SOLID_SPLASH -// # define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + #endif diff --git a/keyboards/bastardkb/scylla/config.h b/keyboards/bastardkb/scylla/config.h index d04dcb97fc..d876b5d018 100644 --- a/keyboards/bastardkb/scylla/config.h +++ b/keyboards/bastardkb/scylla/config.h @@ -54,4 +54,52 @@ # define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS # define RGB_DISABLE_WHEN_USB_SUSPENDED # define RGB_MATRIX_KEYPRESSES +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #endif diff --git a/keyboards/bastardkb/skeletyl/config.h b/keyboards/bastardkb/skeletyl/config.h index 33f3a50109..a7530a5e73 100644 --- a/keyboards/bastardkb/skeletyl/config.h +++ b/keyboards/bastardkb/skeletyl/config.h @@ -52,4 +52,52 @@ # define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS # define RGB_DISABLE_WHEN_USB_SUSPENDED # define RGB_MATRIX_KEYPRESSES +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #endif diff --git a/keyboards/bastardkb/tbkmini/config.h b/keyboards/bastardkb/tbkmini/config.h index a09dafe488..b2308bc8ed 100644 --- a/keyboards/bastardkb/tbkmini/config.h +++ b/keyboards/bastardkb/tbkmini/config.h @@ -55,4 +55,52 @@ # define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS # define RGB_DISABLE_WHEN_USB_SUSPENDED # define RGB_MATRIX_KEYPRESSES +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #endif diff --git a/keyboards/boardsource/beiwagon/config.h b/keyboards/boardsource/beiwagon/config.h index 93856cbb87..eb30e5535c 100644 --- a/keyboards/boardsource/beiwagon/config.h +++ b/keyboards/boardsource/beiwagon/config.h @@ -20,7 +20,7 @@ along with this program. If not, see . #include "config_common.h" /* USB Device descriptor parameter */ -#define VENDOR_ID 0x4273 +#define VENDOR_ID 0x4273 #define PRODUCT_ID 0x0066 #define DEVICE_VER 0x0001 #define MANUFACTURER Boardsource @@ -53,6 +53,54 @@ along with this program. If not, see . #define RGBLIGHT_ANIMATIONS #define RGB_DI_PIN C6 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120 +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_PIXEL_RAIN +#define ENABLE_RGB_MATRIX_PIXEL_FLOW +#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #ifdef RGBLIGHT_ENABLE #define RGBLED_NUM 6 // Number of LEDs #endif diff --git a/keyboards/boardsource/technik_o/config.h b/keyboards/boardsource/technik_o/config.h index 0333ce1801..3b9bf20217 100644 --- a/keyboards/boardsource/technik_o/config.h +++ b/keyboards/boardsource/technik_o/config.h @@ -20,7 +20,7 @@ along with this program. If not, see . #include "config_common.h" /* USB Device descriptor parameter */ -#define VENDOR_ID 0x4273 +#define VENDOR_ID 0x4273 #define PRODUCT_ID 0x0079 #define DEVICE_VER 0x0001 #define MANUFACTURER Boardsource @@ -53,8 +53,56 @@ along with this program. If not, see . #define RGBLIGHT_ANIMATIONS #define RGB_DI_PIN C6 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120 +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_PIXEL_RAIN +#define ENABLE_RGB_MATRIX_PIXEL_FLOW +#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #ifdef RGBLIGHT_ENABLE -#define RGBLED_NUM 10 // Number of LEDs +# define RGBLED_NUM 10 // Number of LEDs #endif #define DRIVER_LED_TOTAL 58 diff --git a/keyboards/boardsource/technik_s/config.h b/keyboards/boardsource/technik_s/config.h index 97dec63efb..4f665330a3 100644 --- a/keyboards/boardsource/technik_s/config.h +++ b/keyboards/boardsource/technik_s/config.h @@ -20,7 +20,7 @@ along with this program. If not, see . #include "config_common.h" /* USB Device descriptor parameter */ -#define VENDOR_ID 0x4273 +#define VENDOR_ID 0x4273 #define PRODUCT_ID 0x0083 #define DEVICE_VER 0x0001 #define MANUFACTURER Boardsource @@ -53,8 +53,56 @@ along with this program. If not, see . #define RGBLIGHT_ANIMATIONS #define RGB_DI_PIN C6 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120 +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_PIXEL_RAIN +#define ENABLE_RGB_MATRIX_PIXEL_FLOW +#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #ifdef RGBLIGHT_ENABLE -#define RGBLED_NUM 10 // Number of LEDs +# define RGBLED_NUM 10 // Number of LEDs #endif #define DRIVER_LED_TOTAL 55 diff --git a/keyboards/capsunlocked/cu80/v2_ansi/rgb/config.h b/keyboards/capsunlocked/cu80/v2_ansi/rgb/config.h index 7e0f0bfccd..00a05ad7da 100644 --- a/keyboards/capsunlocked/cu80/v2_ansi/rgb/config.h +++ b/keyboards/capsunlocked/cu80/v2_ansi/rgb/config.h @@ -26,6 +26,54 @@ along with this program. If not, see . /* moved to RGB specific */ #define RGB_MATRIX_KEYPRESSES #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 50 +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_PIXEL_RAIN +#define ENABLE_RGB_MATRIX_PIXEL_FLOW +#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH /* RGB firmware override */ #undef RGBLIGHT_ANIMATIONS diff --git a/keyboards/capsunlocked/cu80/v2_iso/rgb/config.h b/keyboards/capsunlocked/cu80/v2_iso/rgb/config.h index 3f784e2e06..dbe9143b8b 100644 --- a/keyboards/capsunlocked/cu80/v2_iso/rgb/config.h +++ b/keyboards/capsunlocked/cu80/v2_iso/rgb/config.h @@ -25,6 +25,54 @@ along with this program. If not, see . /* moved to RGB specific */ #define RGB_MATRIX_KEYPRESSES #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 50 +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_PIXEL_RAIN +#define ENABLE_RGB_MATRIX_PIXEL_FLOW +#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH /* RGB firmware override */ #undef RGBLIGHT_ANIMATIONS diff --git a/keyboards/clueboard/66_hotswap/gen1/config.h b/keyboards/clueboard/66_hotswap/gen1/config.h index a6205b27bb..1e124745bd 100644 --- a/keyboards/clueboard/66_hotswap/gen1/config.h +++ b/keyboards/clueboard/66_hotswap/gen1/config.h @@ -83,6 +83,32 @@ #define LED_DRIVER_COUNT 1 #define DRIVER_LED_TOTAL 71 +// LED Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_led_matrix?id=led-matrix-effects +#define ENABLE_LED_MATRIX_ALPHAS_MODS +#define ENABLE_LED_MATRIX_BREATHING +#define ENABLE_LED_MATRIX_BAND +#define ENABLE_LED_MATRIX_BAND_PINWHEEL +#define ENABLE_LED_MATRIX_BAND_SPIRAL +#define ENABLE_LED_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_LED_MATRIX_CYCLE_UP_DOWN +#define ENABLE_LED_MATRIX_CYCLE_OUT_IN +#define ENABLE_LED_MATRIX_DUAL_BEACON +#if defined(LED_MATRIX_KEYREACTIVE_ENABLED) +# define ENABLE_LED_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_LED_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_LED_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_LED_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_LED_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_LED_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_LED_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_LED_MATRIX_SPLASH +# define ENABLE_LED_MATRIX_MULTISPLASH +#endif +#define ENABLE_LED_MATRIX_WAVE_LEFT_RIGHT +#define ENABLE_LED_MATRIX_WAVE_UP_DOWN + #define AUDIO_PIN A5 #define AUDIO_PIN_ALT A4 #define AUDIO_PIN_ALT_AS_NEGATIVE diff --git a/keyboards/crkbd/keymaps/davidrambo/config.h b/keyboards/crkbd/keymaps/davidrambo/config.h index 82057151d3..bf96f265f4 100644 --- a/keyboards/crkbd/keymaps/davidrambo/config.h +++ b/keyboards/crkbd/keymaps/davidrambo/config.h @@ -51,34 +51,52 @@ along with this program. If not, see . #define RGB_MATRIX_VAL_STEP 8 #define RGB_MATRIX_SPD_STEP 10 - /* Disable the animations you don't want/need. You will need to disable a good number of these * - * because they take up a lot of space. Disable until you can successfully compile your firmware. */ - #define DISABLE_RGB_MATRIX_ALPHAS_MODS - #define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN - #define DISABLE_RGB_MATRIX_BREATHING - #define DISABLE_RGB_MATRIX_CYCLE_ALL - #define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT - #define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN - #define DISABLE_RGB_MATRIX_CYCLE_OUT_IN - #define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL - #define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON - #define DISABLE_RGB_MATRIX_DUAL_BEACON - #define DISABLE_RGB_MATRIX_RAINBOW_BEACON - #define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS - #define DISABLE_RGB_MATRIX_RAINDROPS - #define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS - // # define DISABLE_RGB_MATRIX_TYPING_HEATMAP - #define DISABLE_RGB_MATRIX_DIGITAL_RAIN - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS - #define DISABLE_RGB_MATRIX_SPLASH - #define DISABLE_RGB_MATRIX_MULTISPLASH - #define DISABLE_RGB_MATRIX_SOLID_SPLASH - #define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +// # define ENABLE_RGB_MATRIX_ALPHAS_MODS +// # define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +// # define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +// # define ENABLE_RGB_MATRIX_CYCLE_ALL +// # define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +// # define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +// # define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +// # define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +// # define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +// # define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +// # define ENABLE_RGB_MATRIX_DUAL_BEACON +// # define ENABLE_RGB_MATRIX_RAINBOW_BEACON +// # define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +// # define ENABLE_RGB_MATRIX_RAINDROPS +// # define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +// # define ENABLE_RGB_MATRIX_HUE_BREATHING +// # define ENABLE_RGB_MATRIX_HUE_PENDULUM +// # define ENABLE_RGB_MATRIX_HUE_WAVE +// # define ENABLE_RGB_MATRIX_PIXEL_RAIN +// # define ENABLE_RGB_MATRIX_PIXEL_FLOW +// # define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +// # define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// # define ENABLE_RGB_MATRIX_SPLASH +// # define ENABLE_RGB_MATRIX_MULTISPLASH +// # define ENABLE_RGB_MATRIX_SOLID_SPLASH +// # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #endif diff --git a/keyboards/crkbd/keymaps/devdev/config.h b/keyboards/crkbd/keymaps/devdev/config.h index c858f8f2d0..4848af2245 100644 --- a/keyboards/crkbd/keymaps/devdev/config.h +++ b/keyboards/crkbd/keymaps/devdev/config.h @@ -84,34 +84,52 @@ along with this program. If not, see . # define RGB_MATRIX_VAL_STEP 8 # define RGB_MATRIX_SPD_STEP 10 -/* Disable the animations you don't want/need. You will need to disable a good number of these * - * because they take up a lot of space. Disable until you can successfully compile your firmware. */ - # define DISABLE_RGB_MATRIX_ALPHAS_MODS -// # define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -// # define DISABLE_RGB_MATRIX_BREATHING -// # define DISABLE_RGB_MATRIX_CYCLE_ALL -// # define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -// # define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN -// # define DISABLE_RGB_MATRIX_CYCLE_OUT_IN -// # define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -// # define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -// # define DISABLE_RGB_MATRIX_DUAL_BEACON -// # define DISABLE_RGB_MATRIX_RAINBOW_BEACON -// # define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS -// # define DISABLE_RGB_MATRIX_RAINDROPS -// # define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS - # define DISABLE_RGB_MATRIX_TYPING_HEATMAP -// # define DISABLE_RGB_MATRIX_DIGITAL_RAIN -// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE -// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE - # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS - # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -// # define DISABLE_RGB_MATRIX_SPLASH -// # define DISABLE_RGB_MATRIX_MULTISPLASH -// # define DISABLE_RGB_MATRIX_SOLID_SPLASH -// # define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +// # define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +// # define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #endif diff --git a/keyboards/crkbd/keymaps/dsanchezseco/config.h b/keyboards/crkbd/keymaps/dsanchezseco/config.h index f10c474057..bece69ba67 100644 --- a/keyboards/crkbd/keymaps/dsanchezseco/config.h +++ b/keyboards/crkbd/keymaps/dsanchezseco/config.h @@ -33,38 +33,51 @@ along with this program. If not, see . #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_GRADIENT_LEFT_RIGHT -//disable effects -#define DISABLE_RGB_MATRIX_ALPHAS_MODS // Static dual hue speed is hue for secondary hue -#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN // Static gradient top to bottom speed controls how much gradient changes -#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT // Static gradient left to right speed controls how much gradient changes -#define DISABLE_RGB_MATRIX_BAND_SAT // Single hue band fading saturation scrolling left to right -#define DISABLE_RGB_MATRIX_BAND_VAL // Single hue band fading brightness scrolling left to right -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT // Single hue 3 blade spinning pinwheel fades saturation -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL // Single hue 3 blade spinning pinwheel fades brightness -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT // Single hue spinning spiral fades saturation -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL // Single hue spinning spiral fades brightness -#define DISABLE_RGB_MATRIX_CYCLE_ALL // Full keyboard solid hue cycling through full gradient -#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN // Full gradient scrolling top to bottom -#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN // Full gradient scrolling out to in -#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL // Full dual gradients scrolling out to in -#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON // Full gradent Chevron shapped scrolling left to right -#define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL // Full gradient spinning pinwheel around center of keyboard -#define DISABLE_RGB_MATRIX_CYCLE_SPIRAL // Full gradient spinning spiral around center of keyboard -#define DISABLE_RGB_MATRIX_DUAL_BEACON // Full gradient spinning around center of keyboard -#define DISABLE_RGB_MATRIX_RAINBOW_BEACON // Full tighter gradient spinning around center of keyboard -#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS // Full dual gradients spinning two halfs of keyboard -#define DISABLE_RGB_MATRIX_RAINDROPS // Randomly changes a single key's hue -#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS // Randomly changes a single key's hue and saturation -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE // Pulses keys hit to hue & value then fades value out -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE // Static single hue pulses keys hit to shifted hue then fades to current hue -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE // Hue & value pulse near a single key hit then fades value out -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE // Hue & value pulse near multiple key hits then fades value out -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS // Hue & value pulse the same column and row of a single key hit then fades value out -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS // Hue & value pulse the same column and row of multiple key hits then fades value out -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS // Hue & value pulse away on the same column and row of a single key hit then fades value out -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS // Hue & value pulse away on the same column and row of multiple key hits then fades value out -#define DISABLE_RGB_MATRIX_SPLASH // Full gradient & value pulse away from a single key hit then fades value out -#define DISABLE_RGB_MATRIX_MULTISPLASH // Full gradient & value pulse away from multiple key hits then fades value out -#define DISABLE_RGB_MATRIX_SOLID_SPLASH // Hue & value pulse away from a single key hit then fades value out -#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH // Hue & value pulse away from multiple key hits then fades value out -#define DISABLE_RGB_MATRIX_EFFECT_MAX +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +// #define ENABLE_RGB_MATRIX_ALPHAS_MODS +// #define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +// #define ENABLE_RGB_MATRIX_BAND_SAT +// #define ENABLE_RGB_MATRIX_BAND_VAL +// #define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +// #define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +// #define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +// #define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +// #define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +// #define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +// #define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +// #define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +// #define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +// #define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +// #define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +// #define ENABLE_RGB_MATRIX_DUAL_BEACON +// #define ENABLE_RGB_MATRIX_RAINBOW_BEACON +// #define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +// #define ENABLE_RGB_MATRIX_RAINDROPS +// #define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +// // #define ENABLE_RGB_MATRIX_HUE_BREATHING +// #define ENABLE_RGB_MATRIX_HUE_PENDULUM +// #define ENABLE_RGB_MATRIX_HUE_WAVE +// #define ENABLE_RGB_MATRIX_PIXEL_RAIN +// #define ENABLE_RGB_MATRIX_PIXEL_FLOW +// #define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// // enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// // enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// #define ENABLE_RGB_MATRIX_SPLASH +// #define ENABLE_RGB_MATRIX_MULTISPLASH +// #define ENABLE_RGB_MATRIX_SOLID_SPLASH +// #define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH diff --git a/keyboards/crkbd/keymaps/gotham/config.h b/keyboards/crkbd/keymaps/gotham/config.h index 05b04e0aa3..1ff008b2de 100644 --- a/keyboards/crkbd/keymaps/gotham/config.h +++ b/keyboards/crkbd/keymaps/gotham/config.h @@ -49,40 +49,40 @@ /* Disable the animations you don't want/need. You will need to disable a good number of these * * because they take up a lot of space. Disable until you can successfully compile your firmware. */ -# define DISABLE_RGB_MATRIX_ALPHAS_MODS -# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -# define DISABLE_RGB_MATRIX_BREATHING -# define DISABLE_RGB_MATRIX_BAND_SAT -# define DISABLE_RGB_MATRIX_BAND_VAL -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL -// #define DISABLE_RGB_MATRIX_CYCLE_ALL -# define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -# define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN -# define DISABLE_RGB_MATRIX_CYCLE_OUT_IN -# define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -// #define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -# define DISABLE_RGB_MATRIX_DUAL_BEACON -# define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL -# define DISABLE_RGB_MATRIX_CYCLE_SPIRAL -# define DISABLE_RGB_MATRIX_RAINBOW_BEACON -# define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS -# define DISABLE_RGB_MATRIX_RAINDROPS -# define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS -# define DISABLE_RGB_MATRIX_TYPING_HEATMAP -# define DISABLE_RGB_MATRIX_DIGITAL_RAIN -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -// #define DISABLE_RGB_MATRIX_SPLASH -# define DISABLE_RGB_MATRIX_MULTISPLASH -# define DISABLE_RGB_MATRIX_SOLID_SPLASH -# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +# undef ENABLE_RGB_MATRIX_ALPHAS_MODS +# undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# undef ENABLE_RGB_MATRIX_BREATHING +# undef ENABLE_RGB_MATRIX_BAND_SAT +# undef ENABLE_RGB_MATRIX_BAND_VAL +# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +// #undef ENABLE_RGB_MATRIX_CYCLE_ALL +# undef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# undef ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +// #undef ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# undef ENABLE_RGB_MATRIX_DUAL_BEACON +# undef ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# undef ENABLE_RGB_MATRIX_RAINBOW_BEACON +# undef ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# undef ENABLE_RGB_MATRIX_RAINDROPS +# undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# undef ENABLE_RGB_MATRIX_TYPING_HEATMAP +# undef ENABLE_RGB_MATRIX_DIGITAL_RAIN +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// #undef ENABLE_RGB_MATRIX_SPLASH +# undef ENABLE_RGB_MATRIX_MULTISPLASH +# undef ENABLE_RGB_MATRIX_SOLID_SPLASH +# undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #endif diff --git a/keyboards/crkbd/keymaps/kidbrazil/config.h b/keyboards/crkbd/keymaps/kidbrazil/config.h index 752ea862e0..e44ae520f4 100644 --- a/keyboards/crkbd/keymaps/kidbrazil/config.h +++ b/keyboards/crkbd/keymaps/kidbrazil/config.h @@ -68,48 +68,48 @@ along with this program. If not, see . /* Disable the animations you don't want/need. You will need to disable a good number of these * * because they take up a lot of space. Disable until you can successfully compile your firmware. */ - #define DISABLE_RGB_MATRIX_ALPHAS_MODS - #define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN - #define DISABLE_RGB_MATRIX_BREATHING - #define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT - #define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL - #define DISABLE_RGB_MATRIX_BAND_SAT - #define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT - #define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL - #define DISABLE_RGB_MATRIX_BAND_VAL - #define DISABLE_RGB_MATRIX_CYCLE_ALL - #define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT - #define DISABLE_RGB_MATRIX_CYCLE_OUT_IN - #define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL - #define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL - #define DISABLE_RGB_MATRIX_CYCLE_SPIRAL - #define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN - #define DISABLE_RGB_MATRIX_DUAL_BEACON - #define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS - #define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON - #define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE - #define DISABLE_RGB_MATRIX_SOLID_SPLASH - #define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH - #define DISABLE_RGB_MATRIX_SOLID_SPLASH - #define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH - #define DISABLE_RGB_MATRIX_SPLASH - #define DISABLE_RGB_MATRIX_MULTISPLASH - #define DISABLE_RGB_MATRIX_SPLASH - #define DISABLE_RGB_MATRIX_MULTISPLASH +# undef ENABLE_RGB_MATRIX_ALPHAS_MODS +# undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# undef ENABLE_RGB_MATRIX_BREATHING +# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# undef ENABLE_RGB_MATRIX_BAND_SAT +# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# undef ENABLE_RGB_MATRIX_BAND_VAL +# undef ENABLE_RGB_MATRIX_CYCLE_ALL +# undef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# undef ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# undef ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# undef ENABLE_RGB_MATRIX_DUAL_BEACON +# undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# undef ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# undef ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# undef ENABLE_RGB_MATRIX_SOLID_SPLASH +# undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH +# undef ENABLE_RGB_MATRIX_SOLID_SPLASH +# undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH +# undef ENABLE_RGB_MATRIX_SPLASH +# undef ENABLE_RGB_MATRIX_MULTISPLASH +# undef ENABLE_RGB_MATRIX_SPLASH +# undef ENABLE_RGB_MATRIX_MULTISPLASH #endif // Custom Font path #define OLED_FONT_H "keyboards/crkbd/keymaps/kidbrazil/glcdfont.c" diff --git a/keyboards/crkbd/keymaps/mcrown/config.h b/keyboards/crkbd/keymaps/mcrown/config.h index e40bd639f3..15a1f20954 100644 --- a/keyboards/crkbd/keymaps/mcrown/config.h +++ b/keyboards/crkbd/keymaps/mcrown/config.h @@ -36,50 +36,50 @@ #define RGB_MATRIX_FRAMEBUFFER_EFFECTS /* BEGIN: Disable RGB Effects */ -// #define DISABLE_RGB_MATRIX_SOLID_COLOR -// #define DISABLE_RGB_MATRIX_ALPHAS_MODS -// #define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -// #define DISABLE_RGB_MATRIX_BREATHING -// #define DISABLE_RGB_MATRIX_BAND_SAT -// #define DISABLE_RGB_MATRIX_BAND_VAL -// #define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -// #define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -// #define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -// #define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL -// #define DISABLE_RGB_MATRIX_CYCLE_ALL -// #define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -// #define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN -// #define DISABLE_RGB_MATRIX_CYCLE_OUT_IN -// #define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL - #define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON - #define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL - #define DISABLE_RGB_MATRIX_CYCLE_SPIRAL -// #define DISABLE_RGB_MATRIX_DUAL_BEACON - #define DISABLE_RGB_MATRIX_RAINBOW_BEACON - #define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS - #define DISABLE_RGB_MATRIX_RAINDROPS -// #define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +// #undef ENABLE_RGB_MATRIX_SOLID_COLOR +// #undef ENABLE_RGB_MATRIX_ALPHAS_MODS +// #undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +// #undef ENABLE_RGB_MATRIX_BREATHING +// #undef ENABLE_RGB_MATRIX_BAND_SAT +// #undef ENABLE_RGB_MATRIX_BAND_VAL +// #undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +// #undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +// #undef ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +// #undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +// #undef ENABLE_RGB_MATRIX_CYCLE_ALL +// #undef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +// #undef ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +// #undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN +// #undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# undef ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# undef ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL +// #undef ENABLE_RGB_MATRIX_DUAL_BEACON +# undef ENABLE_RGB_MATRIX_RAINBOW_BEACON +# undef ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# undef ENABLE_RGB_MATRIX_RAINDROPS +// #undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS - /* BEGIN: RGB_MATRIX_FRAMEBUFFER_EFFECTS */ -// #define DISABLE_RGB_MATRIX_TYPING_HEATMAP -// #define DISABLE_RGB_MATRIX_DIGITAL_RAIN - /* END: RGB_MATRIX_FRAMEBUFFER_EFFECTS */ +/* BEGIN: RGB_MATRIX_FRAMEBUFFER_EFFECTS */ +// #undef ENABLE_RGB_MATRIX_TYPING_HEATMAP +// #undef ENABLE_RGB_MATRIX_DIGITAL_RAIN +/* END: RGB_MATRIX_FRAMEBUFFER_EFFECTS */ - /* BEGIN: RGB_MATRIX_KEYPRESSES */ -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -// #define DISABLE_RGB_MATRIX_SPLASH -// #define DISABLE_RGB_MATRIX_MULTISPLASH -// #define DISABLE_RGB_MATRIX_SOLID_SPLASH -// #define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH - /* END: RGB_MATRIX_KEYPRESSES */ - /* END: Disable RGB Effects */ +/* BEGIN: RGB_MATRIX_KEYPRESSES */ +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// #undef ENABLE_RGB_MATRIX_SPLASH +// #undef ENABLE_RGB_MATRIX_MULTISPLASH +// #undef ENABLE_RGB_MATRIX_SOLID_SPLASH +// #undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH +/* END: RGB_MATRIX_KEYPRESSES */ +/* END: Disable RGB Effects */ #endif /* To tell the compiler to use custom font */ diff --git a/keyboards/crkbd/keymaps/ninjonas/config.h b/keyboards/crkbd/keymaps/ninjonas/config.h index d5b9a86985..0c0819130f 100644 --- a/keyboards/crkbd/keymaps/ninjonas/config.h +++ b/keyboards/crkbd/keymaps/ninjonas/config.h @@ -37,51 +37,51 @@ along with this program. If not, see . // #define RGB_MATRIX_KEYPRESSES #define RGB_MATRIX_FRAMEBUFFER_EFFECTS - // BEGIN: Disable RGB Effects - //#define DISABLE_RGB_MATRIX_SOLID_COLOR - //#define DISABLE_RGB_MATRIX_ALPHAS_MODS - //#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN - #define DISABLE_RGB_MATRIX_BREATHING - #define DISABLE_RGB_MATRIX_BAND_SAT - #define DISABLE_RGB_MATRIX_BAND_VAL - // #define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT - #define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL - #define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT - #define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL - #define DISABLE_RGB_MATRIX_CYCLE_ALL - #define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT - #define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN - #define DISABLE_RGB_MATRIX_CYCLE_OUT_IN - #define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL - #define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON - #define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL - #define DISABLE_RGB_MATRIX_CYCLE_SPIRAL - #define DISABLE_RGB_MATRIX_DUAL_BEACON - #define DISABLE_RGB_MATRIX_RAINBOW_BEACON - #define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS - #define DISABLE_RGB_MATRIX_RAINDROPS - #define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +// BEGIN: Disable RGB Effects +//#undef ENABLE_RGB_MATRIX_SOLID_COLOR +//#undef ENABLE_RGB_MATRIX_ALPHAS_MODS +//#undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# undef ENABLE_RGB_MATRIX_BREATHING +# undef ENABLE_RGB_MATRIX_BAND_SAT +# undef ENABLE_RGB_MATRIX_BAND_VAL +// #undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# undef ENABLE_RGB_MATRIX_CYCLE_ALL +# undef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# undef ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# undef ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# undef ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# undef ENABLE_RGB_MATRIX_DUAL_BEACON +# undef ENABLE_RGB_MATRIX_RAINBOW_BEACON +# undef ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# undef ENABLE_RGB_MATRIX_RAINDROPS +# undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS - // BEGIN: RGB_MATRIX_FRAMEBUFFER_EFFECTS - #define DISABLE_RGB_MATRIX_TYPING_HEATMAP - // #define DISABLE_RGB_MATRIX_DIGITAL_RAIN - // END: RGB_MATRIX_FRAMEBUFFER_EFFECTS +// BEGIN: RGB_MATRIX_FRAMEBUFFER_EFFECTS +# undef ENABLE_RGB_MATRIX_TYPING_HEATMAP +// #undef ENABLE_RGB_MATRIX_DIGITAL_RAIN +// END: RGB_MATRIX_FRAMEBUFFER_EFFECTS - // BEGIN: RGB_MATRIX_KEYPRESSES - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS - #define DISABLE_RGB_MATRIX_SPLASH - #define DISABLE_RGB_MATRIX_MULTISPLASH - #define DISABLE_RGB_MATRIX_SOLID_SPLASH - #define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH - // END: RGB_MATRIX_KEYPRESSES - // END: Disable RGB Effects +// BEGIN: RGB_MATRIX_KEYPRESSES +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# undef ENABLE_RGB_MATRIX_SPLASH +# undef ENABLE_RGB_MATRIX_MULTISPLASH +# undef ENABLE_RGB_MATRIX_SOLID_SPLASH +# undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH +// END: RGB_MATRIX_KEYPRESSES +// END: Disable RGB Effects #endif #define OLED_FONT_H "keyboards/crkbd/lib/glcdfont.c" diff --git a/keyboards/crkbd/keymaps/rpbaptist/config.h b/keyboards/crkbd/keymaps/rpbaptist/config.h index 3c5222eda8..3300684d63 100644 --- a/keyboards/crkbd/keymaps/rpbaptist/config.h +++ b/keyboards/crkbd/keymaps/rpbaptist/config.h @@ -50,50 +50,50 @@ along with this program. If not, see . # define RGB_MATRIX_VAL_STEP 10 # define RGB_MATRIX_SPD_STEP 10 -# define DISABLE_RGB_MATRIX_ALPHAS_MODS -# define DISABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT -# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -# define DISABLE_RGB_MATRIX_BREATHING -# define DISABLE_RGB_MATRIX_BAND_SAT -# define DISABLE_RGB_MATRIX_BAND_VAL -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL - -// #define DISABLE_RGB_MATRIX_CYCLE_ALL -// # define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -# define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN -# define DISABLE_RGB_MATRIX_CYCLE_OUT_IN -# define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -# define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -# define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL -# define DISABLE_RGB_MATRIX_CYCLE_SPIRAL -# define DISABLE_RGB_MATRIX_DUAL_BEACON -# define DISABLE_RGB_MATRIX_RAINBOW_BEACON -// #define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS -# define DISABLE_RGB_MATRIX_RAINDROPS -# define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# undef ENABLE_RGB_MATRIX_ALPHAS_MODS +# undef ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# undef ENABLE_RGB_MATRIX_BREATHING +# undef ENABLE_RGB_MATRIX_BAND_SAT +# undef ENABLE_RGB_MATRIX_BAND_VAL +# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL + +// #undef ENABLE_RGB_MATRIX_CYCLE_ALL +// # undef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# undef ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# undef ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# undef ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# undef ENABLE_RGB_MATRIX_DUAL_BEACON +# undef ENABLE_RGB_MATRIX_RAINBOW_BEACON +// #undef ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# undef ENABLE_RGB_MATRIX_RAINDROPS +# undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS # define RGB_MATRIX_FRAMEBUFFER_EFFECTS -// #define DISABLE_RGB_MATRIX_TYPING_HEATMAP -# define DISABLE_RGB_MATRIX_DIGITAL_RAIN +// #undef ENABLE_RGB_MATRIX_TYPING_HEATMAP +# undef ENABLE_RGB_MATRIX_DIGITAL_RAIN # define RGB_MATRIX_KEYPRESSES // reacts to keypresses -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS - -# define DISABLE_RGB_MATRIX_SPLASH -# define DISABLE_RGB_MATRIX_MULTISPLASH -# define DISABLE_RGB_MATRIX_SOLID_SPLASH -# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +// # undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS + +# undef ENABLE_RGB_MATRIX_SPLASH +# undef ENABLE_RGB_MATRIX_MULTISPLASH +# undef ENABLE_RGB_MATRIX_SOLID_SPLASH +# undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH # define RGB_MATRIX_ANIMATION_SPEED_DEFAULT UINT8_MAX / 2 # define RGB_MATRIX_ANIMATION_SPEED_SLOW RGB_MATRIX_ANIMATION_SPEED_DEFAULT / 4 diff --git a/keyboards/crkbd/keymaps/rpbaptist/readme.md b/keyboards/crkbd/keymaps/rpbaptist/readme.md index b9e749b5c6..9525cf7cfe 100644 --- a/keyboards/crkbd/keymaps/rpbaptist/readme.md +++ b/keyboards/crkbd/keymaps/rpbaptist/readme.md @@ -51,7 +51,7 @@ This is the gaming extended layer where movement keys remain the same. This mean I took a big inspiration from Drashna's RGB configuration and tweaked it. - `RGB_UND`: Toggles underglow indicators on and off. Each layer has its own color. -- `RGB_IDL`: This will enable/disable idle mode. By default, when typing, the `DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS` will be used. When the idle timeout has exceeded the secondary animation will be activated, which is `RGB_MATRIX_CYCLE_ALL` by default. When switching to `GAMING` layer the timeout will be reduced and the idle animation changed to `RGB_MATRIX_RAINBOW_PINWHEELS`. +- `RGB_IDL`: This will enable/disable idle mode. By default, when typing, the `ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS` will be used. When the idle timeout has exceeded the secondary animation will be activated, which is `RGB_MATRIX_CYCLE_ALL` by default. When switching to `GAMING` layer the timeout will be reduced and the idle animation changed to `RGB_MATRIX_RAINBOW_PINWHEELS`. When idle mode is enabled, `RGB_MATRIX_TYPING_HEATMAP` and `RGB_MATRIX_MULTISPLASH` will be used for active animation. All others for idle animation. When disabling idle mode, the current idle animation will be activated. Additionally, on idling, the underglow layer indication will be deactivated. - There are no RGB mode cycle keys, but instead several keys to use a specific RGB directly. Each has their own default speed, although this can be changed. diff --git a/keyboards/crkbd/keymaps/soundmonster/config.h b/keyboards/crkbd/keymaps/soundmonster/config.h index 8235b48697..0687f9c5c8 100644 --- a/keyboards/crkbd/keymaps/soundmonster/config.h +++ b/keyboards/crkbd/keymaps/soundmonster/config.h @@ -71,40 +71,40 @@ along with this program. If not, see . /* Disable the animations you don't want/need. You will need to disable a good number of these * * because they take up a lot of space. Disable until you can successfully compile your firmware. */ -// # define DISABLE_RGB_MATRIX_ALPHAS_MODS -# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -# define DISABLE_RGB_MATRIX_BREATHING -// # define DISABLE_RGB_MATRIX_BAND_SAT -# define DISABLE_RGB_MATRIX_BAND_VAL -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL -# define DISABLE_RGB_MATRIX_CYCLE_ALL -# define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -# define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN -# define DISABLE_RGB_MATRIX_CYCLE_OUT_IN -# define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -// # define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -# define DISABLE_RGB_MATRIX_DUAL_BEACON -# define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL -# define DISABLE_RGB_MATRIX_CYCLE_SPIRAL -# define DISABLE_RGB_MATRIX_RAINBOW_BEACON -# define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS -// # define DISABLE_RGB_MATRIX_RAINDROPS -# define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS -// # define DISABLE_RGB_MATRIX_TYPING_HEATMAP -// # define DISABLE_RGB_MATRIX_DIGITAL_RAIN -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -# define DISABLE_RGB_MATRIX_SPLASH -// # define DISABLE_RGB_MATRIX_MULTISPLASH -# define DISABLE_RGB_MATRIX_SOLID_SPLASH -# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +// # undef ENABLE_RGB_MATRIX_ALPHAS_MODS +# undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# undef ENABLE_RGB_MATRIX_BREATHING +// # undef ENABLE_RGB_MATRIX_BAND_SAT +# undef ENABLE_RGB_MATRIX_BAND_VAL +# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# undef ENABLE_RGB_MATRIX_CYCLE_ALL +# undef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# undef ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +// # undef ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# undef ENABLE_RGB_MATRIX_DUAL_BEACON +# undef ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# undef ENABLE_RGB_MATRIX_RAINBOW_BEACON +# undef ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +// # undef ENABLE_RGB_MATRIX_RAINDROPS +# undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +// # undef ENABLE_RGB_MATRIX_TYPING_HEATMAP +// # undef ENABLE_RGB_MATRIX_DIGITAL_RAIN +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +// # undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# undef ENABLE_RGB_MATRIX_SPLASH +// # undef ENABLE_RGB_MATRIX_MULTISPLASH +# undef ENABLE_RGB_MATRIX_SOLID_SPLASH +# undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #endif diff --git a/keyboards/crkbd/readme.md b/keyboards/crkbd/readme.md index f3bf152d20..64b51f54f0 100644 --- a/keyboards/crkbd/readme.md +++ b/keyboards/crkbd/readme.md @@ -56,34 +56,54 @@ And in your `config.h` file, add the following: /* Disable the animations you don't want/need. You will need to disable a good number of these * * because they take up a lot of space. Disable until you can successfully compile your firmware. */ -// # define DISABLE_RGB_MATRIX_ALPHAS_MODS -// # define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -// # define DISABLE_RGB_MATRIX_BREATHING -// # define DISABLE_RGB_MATRIX_CYCLE_ALL -// # define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -// # define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN -// # define DISABLE_RGB_MATRIX_CYCLE_OUT_IN -// # define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -// # define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -// # define DISABLE_RGB_MATRIX_DUAL_BEACON -// # define DISABLE_RGB_MATRIX_RAINBOW_BEACON -// # define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS -// # define DISABLE_RGB_MATRIX_RAINDROPS -// # define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS -// # define DISABLE_RGB_MATRIX_TYPING_HEATMAP -// # define DISABLE_RGB_MATRIX_DIGITAL_RAIN -// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE -// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -// # define DISABLE_RGB_MATRIX_SPLASH -// # define DISABLE_RGB_MATRIX_MULTISPLASH -// # define DISABLE_RGB_MATRIX_SOLID_SPLASH -// # define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #endif ``` diff --git a/keyboards/dekunukem/duckypad/config.h b/keyboards/dekunukem/duckypad/config.h index 59c6826662..06f2ae807d 100644 --- a/keyboards/dekunukem/duckypad/config.h +++ b/keyboards/dekunukem/duckypad/config.h @@ -42,7 +42,54 @@ along with this program. If not, see . #define RGB_MATRIX_KEYPRESSES #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_REACTIVE_SIMPLE #define RGB_MATRIX_STARTUP_HUE 221 - +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #endif diff --git a/keyboards/doro67/rgb/config.h b/keyboards/doro67/rgb/config.h index 709d3cdd3b..b2d26b29ae 100644 --- a/keyboards/doro67/rgb/config.h +++ b/keyboards/doro67/rgb/config.h @@ -56,6 +56,54 @@ along with this program. If not, see . #define DRIVER_LED_TOTAL 67 #define RGB_MATRIX_KEYPRESSES +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_PIXEL_RAIN +#define ENABLE_RGB_MATRIX_PIXEL_FLOW +#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH /* * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. diff --git a/keyboards/dp60/config.h b/keyboards/dp60/config.h index 2593b7ff71..f4a44206f4 100644 --- a/keyboards/dp60/config.h +++ b/keyboards/dp60/config.h @@ -59,3 +59,51 @@ #define DRIVER_1_LED_TOTAL 36 #define DRIVER_2_LED_TOTAL 36 #define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_PIXEL_RAIN +#define ENABLE_RGB_MATRIX_PIXEL_FLOW +#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH diff --git a/keyboards/dtisaac/dosa40rgb/config.h b/keyboards/dtisaac/dosa40rgb/config.h index 62c8c6e22c..c2c0ebd6d4 100644 --- a/keyboards/dtisaac/dosa40rgb/config.h +++ b/keyboards/dtisaac/dosa40rgb/config.h @@ -58,6 +58,51 @@ along with this program. If not, see . #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set + +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_FRACTAL +#define ENABLE_RGB_MATRIX_PIXEL_RAIN + +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN + +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ @@ -65,4 +110,4 @@ along with this program. If not, see . /* disable these deprecated features by default */ #define NO_ACTION_MACRO -#define NO_ACTION_FUNCTION \ No newline at end of file +#define NO_ACTION_FUNCTION diff --git a/keyboards/durgod/dgk6x/config.h b/keyboards/durgod/dgk6x/config.h index 53f824b98e..92673e5c24 100644 --- a/keyboards/durgod/dgk6x/config.h +++ b/keyboards/durgod/dgk6x/config.h @@ -83,9 +83,54 @@ # define RGB_MATRIX_LED_PROCESS_LIMIT 4 # define RGB_MATRIX_LED_FLUSH_LIMIT 26 -# define DISABLE_RGB_MATRIX_HUE_BREATHING -# define DISABLE_RGB_MATRIX_HUE_PENDULUM -# define DISABLE_RGB_MATRIX_HUE_WAVE +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +// # define ENABLE_RGB_MATRIX_HUE_BREATHING +// # define ENABLE_RGB_MATRIX_HUE_PENDULUM +// # define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH // This allows VIA to control RGB Matrix settings in the 'Lighting' section. #define VIA_QMK_RGBLIGHT_ENABLE diff --git a/keyboards/dztech/dz60rgb/keymaps/kgreulich/config.h b/keyboards/dztech/dz60rgb/keymaps/kgreulich/config.h index 3c88721777..fc836b5ebb 100644 --- a/keyboards/dztech/dz60rgb/keymaps/kgreulich/config.h +++ b/keyboards/dztech/dz60rgb/keymaps/kgreulich/config.h @@ -31,40 +31,40 @@ #undef DISABLE_RGB_MATRIX_SOLID_MULTISPLASH #undef RGB_MATRIX_STARTUP_MODE #define RGB_MATRIX_FRAMEBUFFER_EFFECTS -#define DISABLE_RGB_MATRIX_SOLID_COLOR -#define DISABLE_RGB_MATRIX_ALPHAS_MODS -#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -#define DISABLE_RGB_MATRIX_BREATHING -#define DISABLE_RGB_MATRIX_BAND_SAT -#define DISABLE_RGB_MATRIX_BAND_VAL -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL -#define DISABLE_RGB_MATRIX_CYCLE_ALL -#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN -#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN -#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -#define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL -#define DISABLE_RGB_MATRIX_CYCLE_SPIRAL -#define DISABLE_RGB_MATRIX_DUAL_BEACON -#define DISABLE_RGB_MATRIX_RAINBOW_BEACON -#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS -#define DISABLE_RGB_MATRIX_RAINDROPS -#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS -#define DISABLE_RGB_MATRIX_TYPING_HEATMAP -#define DISABLE_RGB_MATRIX_DIGITAL_RAIN -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -//#define DISABLE_RGB_MATRIX_SOLID_REACTIVE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -#define DISABLE_RGB_MATRIX_SPLASH -#define DISABLE_RGB_MATRIX_MULTISPLASH -#define DISABLE_RGB_MATRIX_SOLID_SPLASH -#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +#undef ENABLE_RGB_MATRIX_SOLID_COLOR +#undef ENABLE_RGB_MATRIX_ALPHAS_MODS +#undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#undef ENABLE_RGB_MATRIX_BREATHING +#undef ENABLE_RGB_MATRIX_BAND_SAT +#undef ENABLE_RGB_MATRIX_BAND_VAL +#undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#undef ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#undef ENABLE_RGB_MATRIX_CYCLE_ALL +#undef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#undef ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#undef ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#undef ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#undef ENABLE_RGB_MATRIX_DUAL_BEACON +#undef ENABLE_RGB_MATRIX_RAINBOW_BEACON +#undef ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#undef ENABLE_RGB_MATRIX_RAINDROPS +#undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#undef ENABLE_RGB_MATRIX_TYPING_HEATMAP +#undef ENABLE_RGB_MATRIX_DIGITAL_RAIN +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +//#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#undef ENABLE_RGB_MATRIX_SPLASH +#undef ENABLE_RGB_MATRIX_MULTISPLASH +#undef ENABLE_RGB_MATRIX_SOLID_SPLASH +#undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH diff --git a/keyboards/dztech/dz60rgb/keymaps/matthewrobo/config.h b/keyboards/dztech/dz60rgb/keymaps/matthewrobo/config.h index 1002f010e1..c2b14f5284 100644 --- a/keyboards/dztech/dz60rgb/keymaps/matthewrobo/config.h +++ b/keyboards/dztech/dz60rgb/keymaps/matthewrobo/config.h @@ -13,43 +13,43 @@ #undef RGB_MATRIX_STARTUP_MODE #define RGB_MATRIX_FRAMEBUFFER_EFFECTS -// #define DISABLE_RGB_MATRIX_SOLID_COLOR -// #define DISABLE_RGB_MATRIX_ALPHAS_MODS -// #define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -// #define DISABLE_RGB_MATRIX_BREATHING -#define DISABLE_RGB_MATRIX_BAND_SAT -// #define DISABLE_RGB_MATRIX_BAND_VAL -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL -#define DISABLE_RGB_MATRIX_CYCLE_ALL -#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN -#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN -#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -#define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL -// #define DISABLE_RGB_MATRIX_CYCLE_SPIRAL -#define DISABLE_RGB_MATRIX_DUAL_BEACON -#define DISABLE_RGB_MATRIX_RAINBOW_BEACON -#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS -#define DISABLE_RGB_MATRIX_RAINDROPS -#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS -// #define DISABLE_RGB_MATRIX_TYPING_HEATMAP -#define DISABLE_RGB_MATRIX_DIGITAL_RAIN -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -// #define DISABLE_RGB_MATRIX_SPLASH -// #define DISABLE_RGB_MATRIX_MULTISPLASH -// #define DISABLE_RGB_MATRIX_SOLID_SPLASH -// #define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +// #undef ENABLE_RGB_MATRIX_SOLID_COLOR +// #undef ENABLE_RGB_MATRIX_ALPHAS_MODS +// #undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +// #undef ENABLE_RGB_MATRIX_BREATHING +#undef ENABLE_RGB_MATRIX_BAND_SAT +// #undef ENABLE_RGB_MATRIX_BAND_VAL +#undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#undef ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#undef ENABLE_RGB_MATRIX_CYCLE_ALL +#undef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#undef ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#undef ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#undef ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +// #undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#undef ENABLE_RGB_MATRIX_DUAL_BEACON +#undef ENABLE_RGB_MATRIX_RAINBOW_BEACON +#undef ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#undef ENABLE_RGB_MATRIX_RAINDROPS +#undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +// #undef ENABLE_RGB_MATRIX_TYPING_HEATMAP +#undef ENABLE_RGB_MATRIX_DIGITAL_RAIN +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// #undef ENABLE_RGB_MATRIX_SPLASH +// #undef ENABLE_RGB_MATRIX_MULTISPLASH +// #undef ENABLE_RGB_MATRIX_SOLID_SPLASH +// #undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #define QMK_KEYS_PER_SCAN 4 diff --git a/keyboards/dztech/dz60rgb/keymaps/piv3rt/config.h b/keyboards/dztech/dz60rgb/keymaps/piv3rt/config.h index a2b29c03be..bdc2a1a057 100644 --- a/keyboards/dztech/dz60rgb/keymaps/piv3rt/config.h +++ b/keyboards/dztech/dz60rgb/keymaps/piv3rt/config.h @@ -18,39 +18,39 @@ along with this program. If not, see . #define FORCE_NKRO #define TAPPING_TERM 100 -#define DISABLE_RGB_MATRIX_ALPHAS_MODS -#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -#define DISABLE_RGB_MATRIX_BREATHING -#define DISABLE_RGB_MATRIX_BAND_SAT -#define DISABLE_RGB_MATRIX_BAND_VAL -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL -#define DISABLE_RGB_MATRIX_CYCLE_ALL -//#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN -#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN -#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -#define DISABLE_RGB_MATRIX_DUAL_BEACON -#define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL -#define DISABLE_RGB_MATRIX_CYCLE_SPIRAL -#define DISABLE_RGB_MATRIX_RAINBOW_BEACON -#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS -#define DISABLE_RGB_MATRIX_RAINDROPS -#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS -#define DISABLE_RGB_MATRIX_TYPING_HEATMAP -#define DISABLE_RGB_MATRIX_DIGITAL_RAIN -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -#define DISABLE_RGB_MATRIX_SPLASH -#define DISABLE_RGB_MATRIX_MULTISPLASH -#define DISABLE_RGB_MATRIX_SOLID_SPLASH -#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +#undef ENABLE_RGB_MATRIX_ALPHAS_MODS +#undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#undef ENABLE_RGB_MATRIX_BREATHING +#undef ENABLE_RGB_MATRIX_BAND_SAT +#undef ENABLE_RGB_MATRIX_BAND_VAL +#undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#undef ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#undef ENABLE_RGB_MATRIX_CYCLE_ALL +//#undef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#undef ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#undef ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#undef ENABLE_RGB_MATRIX_DUAL_BEACON +#undef ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#undef ENABLE_RGB_MATRIX_RAINBOW_BEACON +#undef ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#undef ENABLE_RGB_MATRIX_RAINDROPS +#undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#undef ENABLE_RGB_MATRIX_TYPING_HEATMAP +#undef ENABLE_RGB_MATRIX_DIGITAL_RAIN +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#undef ENABLE_RGB_MATRIX_SPLASH +#undef ENABLE_RGB_MATRIX_MULTISPLASH +#undef ENABLE_RGB_MATRIX_SOLID_SPLASH +#undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH diff --git a/keyboards/dztech/dz60rgb/keymaps/via/config.h b/keyboards/dztech/dz60rgb/keymaps/via/config.h index 1beb7130f7..8ef0df8ee8 100644 --- a/keyboards/dztech/dz60rgb/keymaps/via/config.h +++ b/keyboards/dztech/dz60rgb/keymaps/via/config.h @@ -16,6 +16,6 @@ #pragma once -#define DISABLE_RGB_MATRIX_PIXEL_FLOW -#define DISABLE_RGB_MATRIX_PIXEL_FRACTAL -#define DISABLE_RGB_MATRIX_PIXEL_RAIN +#undef ENABLE_RGB_MATRIX_PIXEL_FLOW +#undef ENABLE_RGB_MATRIX_PIXEL_FRACTAL +#undef ENABLE_RGB_MATRIX_PIXEL_RAIN diff --git a/keyboards/dztech/dz60rgb/keymaps/xunz/config.h b/keyboards/dztech/dz60rgb/keymaps/xunz/config.h index 60220cbbf7..cfeba003bd 100644 --- a/keyboards/dztech/dz60rgb/keymaps/xunz/config.h +++ b/keyboards/dztech/dz60rgb/keymaps/xunz/config.h @@ -8,43 +8,43 @@ #define RGB_MATRIX_FRAMEBUFFER_EFFECTS -// #define DISABLE_RGB_MATRIX_SOLID_COLOR -// #define DISABLE_RGB_MATRIX_ALPHAS_MODS -// #define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -// #define DISABLE_RGB_MATRIX_BREATHING -// #define DISABLE_RGB_MATRIX_BAND_SAT -// #define DISABLE_RGB_MATRIX_BAND_VAL -// #define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -// #define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -// #define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -// #define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL -// #define DISABLE_RGB_MATRIX_CYCLE_ALL -// #define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -// #define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN -// #define DISABLE_RGB_MATRIX_CYCLE_OUT_IN -// #define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -// #define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -// #define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL -// #define DISABLE_RGB_MATRIX_CYCLE_SPIRAL -// #define DISABLE_RGB_MATRIX_DUAL_BEACON -// #define DISABLE_RGB_MATRIX_RAINBOW_BEACON -// #define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS -// #define DISABLE_RGB_MATRIX_RAINDROPS -// #define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS -// #define DISABLE_RGB_MATRIX_TYPING_HEATMAP -// #define DISABLE_RGB_MATRIX_DIGITAL_RAIN -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -// #define DISABLE_RGB_MATRIX_SPLASH -// #define DISABLE_RGB_MATRIX_MULTISPLASH -// #define DISABLE_RGB_MATRIX_SOLID_SPLASH -// #define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +// #undef ENABLE_RGB_MATRIX_SOLID_COLOR +// #undef ENABLE_RGB_MATRIX_ALPHAS_MODS +// #undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +// #undef ENABLE_RGB_MATRIX_BREATHING +// #undef ENABLE_RGB_MATRIX_BAND_SAT +// #undef ENABLE_RGB_MATRIX_BAND_VAL +// #undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +// #undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +// #undef ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +// #undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +// #undef ENABLE_RGB_MATRIX_CYCLE_ALL +// #undef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +// #undef ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +// #undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN +// #undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +// #undef ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +// #undef ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +// #undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL +// #undef ENABLE_RGB_MATRIX_DUAL_BEACON +// #undef ENABLE_RGB_MATRIX_RAINBOW_BEACON +// #undef ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +// #undef ENABLE_RGB_MATRIX_RAINDROPS +// #undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +// #undef ENABLE_RGB_MATRIX_TYPING_HEATMAP +// #undef ENABLE_RGB_MATRIX_DIGITAL_RAIN +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// #undef ENABLE_RGB_MATRIX_SPLASH +// #undef ENABLE_RGB_MATRIX_MULTISPLASH +// #undef ENABLE_RGB_MATRIX_SOLID_SPLASH +// #undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #define QMK_KEYS_PER_SCAN 4 @@ -53,4 +53,3 @@ #define NO_ACTION_ONESHOT #define TAPPING_FORCE_HOLD #define IGNORE_MOD_TAP_INTERRUPT - diff --git a/keyboards/dztech/dz60rgb/v1/config.h b/keyboards/dztech/dz60rgb/v1/config.h index b4b23a6213..0d464b5d6b 100644 --- a/keyboards/dztech/dz60rgb/v1/config.h +++ b/keyboards/dztech/dz60rgb/v1/config.h @@ -41,9 +41,55 @@ # define RGB_MATRIX_KEYPRESSES # define RGB_MATRIX_LED_PROCESS_LIMIT 4 # define RGB_MATRIX_LED_FLUSH_LIMIT 26 -# define DISABLE_RGB_MATRIX_SPLASH -# define DISABLE_RGB_MATRIX_MULTISPLASH -# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// # define ENABLE_RGB_MATRIX_SPLASH +// # define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +// # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + # define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL # define DRIVER_ADDR_1 0b1010000 # define DRIVER_COUNT 1 diff --git a/keyboards/dztech/dz60rgb/v2/config.h b/keyboards/dztech/dz60rgb/v2/config.h index 338575ee9a..3db8ea40f5 100644 --- a/keyboards/dztech/dz60rgb/v2/config.h +++ b/keyboards/dztech/dz60rgb/v2/config.h @@ -40,21 +40,55 @@ # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended # define RGB_MATRIX_KEYPRESSES # define RGB_MATRIX_FRAMEBUFFER_EFFECTS -# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -# define DISABLE_RGB_MATRIX_BAND_SAT -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -# define DISABLE_RGB_MATRIX_SPLASH -# define DISABLE_RGB_MATRIX_MULTISPLASH -# define DISABLE_RGB_MATRIX_SOLID_SPLASH -# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH -# define DISABLE_RGB_MATRIX_DIGITAL_RAIN +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +// # define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +// # define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +// # define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +// # define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +// # define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// # define ENABLE_RGB_MATRIX_SPLASH +// # define ENABLE_RGB_MATRIX_MULTISPLASH +// # define ENABLE_RGB_MATRIX_SOLID_SPLASH +// # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + # define DRIVER_ADDR_1 0b1010000 # define DRIVER_COUNT 1 # define DRIVER_LED_TOTAL 63 diff --git a/keyboards/dztech/dz60rgb/v2_1/config.h b/keyboards/dztech/dz60rgb/v2_1/config.h index e6c08eab42..d785d1e539 100644 --- a/keyboards/dztech/dz60rgb/v2_1/config.h +++ b/keyboards/dztech/dz60rgb/v2_1/config.h @@ -56,21 +56,55 @@ # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended # define RGB_MATRIX_KEYPRESSES # define RGB_MATRIX_FRAMEBUFFER_EFFECTS -# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -# define DISABLE_RGB_MATRIX_BAND_SAT -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -# define DISABLE_RGB_MATRIX_SPLASH -# define DISABLE_RGB_MATRIX_MULTISPLASH -# define DISABLE_RGB_MATRIX_SOLID_SPLASH -# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH -# define DISABLE_RGB_MATRIX_DIGITAL_RAIN +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +// # define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +// # define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +// # define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +// # define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +// # define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// # define ENABLE_RGB_MATRIX_SPLASH +// # define ENABLE_RGB_MATRIX_MULTISPLASH +// # define ENABLE_RGB_MATRIX_SOLID_SPLASH +// # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + # define DRIVER_ADDR_1 0b1010000 # define DRIVER_COUNT 1 # define DRIVER_LED_TOTAL 63 diff --git a/keyboards/dztech/dz60rgb_ansi/v1/config.h b/keyboards/dztech/dz60rgb_ansi/v1/config.h index 7341c1c02c..176bb03a13 100644 --- a/keyboards/dztech/dz60rgb_ansi/v1/config.h +++ b/keyboards/dztech/dz60rgb_ansi/v1/config.h @@ -41,9 +41,55 @@ # define RGB_MATRIX_KEYPRESSES # define RGB_MATRIX_LED_PROCESS_LIMIT 4 # define RGB_MATRIX_LED_FLUSH_LIMIT 26 -# define DISABLE_RGB_MATRIX_SPLASH -# define DISABLE_RGB_MATRIX_MULTISPLASH -# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// # define ENABLE_RGB_MATRIX_SPLASH +// # define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +// # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + # define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL # define DRIVER_ADDR_1 0b1010000 # define DRIVER_COUNT 1 diff --git a/keyboards/dztech/dz60rgb_ansi/v2/config.h b/keyboards/dztech/dz60rgb_ansi/v2/config.h index 7e6842d8d6..5ff2cd6a8c 100644 --- a/keyboards/dztech/dz60rgb_ansi/v2/config.h +++ b/keyboards/dztech/dz60rgb_ansi/v2/config.h @@ -40,21 +40,55 @@ # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended # define RGB_MATRIX_KEYPRESSES # define RGB_MATRIX_FRAMEBUFFER_EFFECTS -# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -# define DISABLE_RGB_MATRIX_BAND_SAT -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -# define DISABLE_RGB_MATRIX_SPLASH -# define DISABLE_RGB_MATRIX_MULTISPLASH -# define DISABLE_RGB_MATRIX_SOLID_SPLASH -# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH -# define DISABLE_RGB_MATRIX_DIGITAL_RAIN +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +// # define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +// # define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +// # define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +// # define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// # define ENABLE_RGB_MATRIX_SPLASH +// # define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +// # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + # define DRIVER_ADDR_1 0b1010000 # define DRIVER_COUNT 1 # define DRIVER_LED_TOTAL 61 diff --git a/keyboards/dztech/dz60rgb_ansi/v2_1/config.h b/keyboards/dztech/dz60rgb_ansi/v2_1/config.h index ad310664a8..7d943f037f 100644 --- a/keyboards/dztech/dz60rgb_ansi/v2_1/config.h +++ b/keyboards/dztech/dz60rgb_ansi/v2_1/config.h @@ -56,21 +56,55 @@ # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended # define RGB_MATRIX_KEYPRESSES # define RGB_MATRIX_FRAMEBUFFER_EFFECTS -# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -# define DISABLE_RGB_MATRIX_BAND_SAT -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -# define DISABLE_RGB_MATRIX_SPLASH -# define DISABLE_RGB_MATRIX_MULTISPLASH -# define DISABLE_RGB_MATRIX_SOLID_SPLASH -# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH -# define DISABLE_RGB_MATRIX_DIGITAL_RAIN +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +// # define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +// # define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +// # define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +// # define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// # define ENABLE_RGB_MATRIX_SPLASH +// # define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +// # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + # define DRIVER_ADDR_1 0b1010000 # define DRIVER_COUNT 1 # define DRIVER_LED_TOTAL 61 diff --git a/keyboards/dztech/dz60rgb_wkl/v1/config.h b/keyboards/dztech/dz60rgb_wkl/v1/config.h index c242401f6b..b8c70ff4fb 100644 --- a/keyboards/dztech/dz60rgb_wkl/v1/config.h +++ b/keyboards/dztech/dz60rgb_wkl/v1/config.h @@ -41,9 +41,55 @@ # define RGB_MATRIX_KEYPRESSES # define RGB_MATRIX_LED_PROCESS_LIMIT 4 # define RGB_MATRIX_LED_FLUSH_LIMIT 26 -# define DISABLE_RGB_MATRIX_SPLASH -# define DISABLE_RGB_MATRIX_MULTISPLASH -# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// # define ENABLE_RGB_MATRIX_SPLASH +// # define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +// # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + # define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL # define DRIVER_ADDR_1 0b1010000 # define DRIVER_COUNT 1 diff --git a/keyboards/dztech/dz60rgb_wkl/v2/config.h b/keyboards/dztech/dz60rgb_wkl/v2/config.h index 45ccf6c9f7..5985fccea7 100644 --- a/keyboards/dztech/dz60rgb_wkl/v2/config.h +++ b/keyboards/dztech/dz60rgb_wkl/v2/config.h @@ -40,21 +40,55 @@ # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended # define RGB_MATRIX_KEYPRESSES # define RGB_MATRIX_FRAMEBUFFER_EFFECTS -# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -# define DISABLE_RGB_MATRIX_BAND_SAT -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -# define DISABLE_RGB_MATRIX_SPLASH -# define DISABLE_RGB_MATRIX_MULTISPLASH -# define DISABLE_RGB_MATRIX_SOLID_SPLASH -# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH -# define DISABLE_RGB_MATRIX_DIGITAL_RAIN +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +// # define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +// # define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +// # define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +// # define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +// # define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// # define ENABLE_RGB_MATRIX_SPLASH +// # define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +// # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + # define DRIVER_ADDR_1 0b1010000 # define DRIVER_COUNT 1 # define DRIVER_LED_TOTAL 62 diff --git a/keyboards/dztech/dz60rgb_wkl/v2_1/config.h b/keyboards/dztech/dz60rgb_wkl/v2_1/config.h index 0e5bb8f67b..bfa9d8d955 100644 --- a/keyboards/dztech/dz60rgb_wkl/v2_1/config.h +++ b/keyboards/dztech/dz60rgb_wkl/v2_1/config.h @@ -56,21 +56,55 @@ # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended # define RGB_MATRIX_KEYPRESSES # define RGB_MATRIX_FRAMEBUFFER_EFFECTS -# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -# define DISABLE_RGB_MATRIX_BAND_SAT -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -# define DISABLE_RGB_MATRIX_SPLASH -# define DISABLE_RGB_MATRIX_MULTISPLASH -# define DISABLE_RGB_MATRIX_SOLID_SPLASH -# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH -# define DISABLE_RGB_MATRIX_DIGITAL_RAIN +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +// # define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +// # define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +// # define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +// # define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +// # define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// # define ENABLE_RGB_MATRIX_SPLASH +// # define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +// # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + # define DRIVER_ADDR_1 0b1010000 # define DRIVER_COUNT 1 # define DRIVER_LED_TOTAL 62 diff --git a/keyboards/dztech/dz65rgb/keymaps/drootz/config.h b/keyboards/dztech/dz65rgb/keymaps/drootz/config.h index 5810507975..109aa3d07e 100644 --- a/keyboards/dztech/dz65rgb/keymaps/drootz/config.h +++ b/keyboards/dztech/dz65rgb/keymaps/drootz/config.h @@ -6,13 +6,13 @@ #ifdef RGB_MATRIX_ENABLE /* Reset default from dz65rgb/v2 config.h */ -# undef DISABLE_RGB_MATRIX_SPLASH -# undef DISABLE_RGB_MATRIX_SOLID_SPLASH +# undef DISABLE_RGB_MATRIX_SPLASH +# undef DISABLE_RGB_MATRIX_SOLID_SPLASH # undef RGB_MATRIX_LED_FLUSH_LIMIT # undef RGB_MATRIX_STARTUP_MODE # undef RGB_MATRIX_MAXIMUM_BRIGHTNESS # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 -# define RGB_MATRIX_LED_FLUSH_LIMIT 16 // default: 26 +# define RGB_MATRIX_LED_FLUSH_LIMIT 16 // default: 26 # define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_TYPING_HEATMAP # define RGB_MATRIX_FRAMEBUFFER_EFFECTS # define RGB_MATRIX_STARTUP_HUE 10 @@ -20,33 +20,33 @@ # define RGB_MATRIX_STARTUP_VAL 200 # define RGB_MATRIX_STARTUP_SPD 75 /* Active RBG Modes */ -/* # define DISABLE_RGB_MATRIX_TYPING_HEATMAP // How hot is your WPM! */ -/* # define DISABLE_RGB_MATRIX_SPLASH // Full gradient & value pulse away from a single key hit then fades value out */ -/* # define DISABLE_RGB_MATRIX_SOLID_SPLASH // Hue & value pulse away from a single key hit then fades value out */ +/* # undef ENABLE_RGB_MATRIX_TYPING_HEATMAP // How hot is your WPM! */ +/* # undef ENABLE_RGB_MATRIX_SPLASH // Full gradient & value pulse away from a single key hit then fades value out */ +/* # undef ENABLE_RGB_MATRIX_SOLID_SPLASH // Hue & value pulse away from a single key hit then fades value out */ /* Disabling to optimize firmware size */ -# define DISABLE_RGB_MATRIX_ALPHAS_MODS // Static dual hue, speed is hue for secondary hue -# define DISABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT // Static gradient left to right, speed controls how much gradient changes -# define DISABLE_RGB_MATRIX_BREATHING // Single hue brightness cycling animation -# define DISABLE_RGB_MATRIX_BAND_VAL // Single hue band fading brightness scrolling left to right -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL // Single hue 3 blade spinning pinwheel fades brightness -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL // Single hue spinning spiral fades brightness -# define DISABLE_RGB_MATRIX_CYCLE_ALL // Full keyboard solid hue cycling through full gradient -# define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT // Full gradient scrolling left to right -# define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN // Full gradient scrolling top to bottom -# define DISABLE_RGB_MATRIX_CYCLE_OUT_IN // Full gradient scrolling out to in -# define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL // Full dual gradients scrolling out to in -# define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON // Full gradent Chevron shapped scrolling left to right -# define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL // Full gradient spinning pinwheel around center of keyboard -# define DISABLE_RGB_MATRIX_CYCLE_SPIRAL // Full gradient spinning spiral around center of keyboard -# define DISABLE_RGB_MATRIX_DUAL_BEACON // Full gradient spinning around center of keyboard -# define DISABLE_RGB_MATRIX_RAINBOW_BEACON // Full tighter gradient spinning around center of keyboard -# define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS // Full dual gradients spinning two halfs of keyboard -# define DISABLE_RGB_MATRIX_RAINDROPS // Randomly changes a single key's hue -# define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS // Randomly changes a single key's hue and saturation -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE // Static single hue, pulses keys hit to shifted hue then fades to current hue +# undef ENABLE_RGB_MATRIX_ALPHAS_MODS // Static dual hue, speed is hue for secondary hue +# undef ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT // Static gradient left to right, speed controls how much gradient changes +# undef ENABLE_RGB_MATRIX_BREATHING // Single hue brightness cycling animation +# undef ENABLE_RGB_MATRIX_BAND_VAL // Single hue band fading brightness scrolling left to right +# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL // Single hue 3 blade spinning pinwheel fades brightness +# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL // Single hue spinning spiral fades brightness +# undef ENABLE_RGB_MATRIX_CYCLE_ALL // Full keyboard solid hue cycling through full gradient +# undef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT // Full gradient scrolling left to right +# undef ENABLE_RGB_MATRIX_CYCLE_UP_DOWN // Full gradient scrolling top to bottom +# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN // Full gradient scrolling out to in +# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL // Full dual gradients scrolling out to in +# undef ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON // Full gradent Chevron shapped scrolling left to right +# undef ENABLE_RGB_MATRIX_CYCLE_PINWHEEL // Full gradient spinning pinwheel around center of keyboard +# undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL // Full gradient spinning spiral around center of keyboard +# undef ENABLE_RGB_MATRIX_DUAL_BEACON // Full gradient spinning around center of keyboard +# undef ENABLE_RGB_MATRIX_RAINBOW_BEACON // Full tighter gradient spinning around center of keyboard +# undef ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS // Full dual gradients spinning two halfs of keyboard +# undef ENABLE_RGB_MATRIX_RAINDROPS // Randomly changes a single key's hue +# undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS // Randomly changes a single key's hue and saturation +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE // Static single hue, pulses keys hit to shifted hue then fades to current hue #endif /* RBG MATRIX */ /* Firmware size Optimizations */ #define NO_ACTION_MACRO #define NO_ACTION_FUNCTION -#define NO_ACTION_ONESHOT +#define NO_ACTION_ONESHOT diff --git a/keyboards/dztech/dz65rgb/keymaps/jumper149/config.h b/keyboards/dztech/dz65rgb/keymaps/jumper149/config.h index d9d295dfa8..504fc7f4f3 100644 --- a/keyboards/dztech/dz65rgb/keymaps/jumper149/config.h +++ b/keyboards/dztech/dz65rgb/keymaps/jumper149/config.h @@ -19,42 +19,42 @@ #ifdef RGB_MATRIX_ENABLE -#define DISABLE_RGB_MATRIX_ALPHAS_MODS -#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -#define DISABLE_RGB_MATRIX_BREATHING -#define DISABLE_RGB_MATRIX_BAND_SAT -#define DISABLE_RGB_MATRIX_BAND_VAL -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL -#define DISABLE_RGB_MATRIX_CYCLE_ALL -#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN -#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN -#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -#define DISABLE_RGB_MATRIX_DUAL_BEACON -#define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL -#define DISABLE_RGB_MATRIX_CYCLE_SPIRAL -#define DISABLE_RGB_MATRIX_RAINBOW_BEACON -#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS -#define DISABLE_RGB_MATRIX_RAINDROPS -#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS -#define DISABLE_RGB_MATRIX_TYPING_HEATMAP -#define DISABLE_RGB_MATRIX_DIGITAL_RAIN -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -#define DISABLE_RGB_MATRIX_SPLASH -#define DISABLE_RGB_MATRIX_MULTISPLASH -#define DISABLE_RGB_MATRIX_SOLID_SPLASH -#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +# undef ENABLE_RGB_MATRIX_ALPHAS_MODS +# undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# undef ENABLE_RGB_MATRIX_BREATHING +# undef ENABLE_RGB_MATRIX_BAND_SAT +# undef ENABLE_RGB_MATRIX_BAND_VAL +# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# undef ENABLE_RGB_MATRIX_CYCLE_ALL +# undef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# undef ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# undef ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# undef ENABLE_RGB_MATRIX_DUAL_BEACON +# undef ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# undef ENABLE_RGB_MATRIX_RAINBOW_BEACON +# undef ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# undef ENABLE_RGB_MATRIX_RAINDROPS +# undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# undef ENABLE_RGB_MATRIX_TYPING_HEATMAP +# undef ENABLE_RGB_MATRIX_DIGITAL_RAIN +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# undef ENABLE_RGB_MATRIX_SPLASH +# undef ENABLE_RGB_MATRIX_MULTISPLASH +# undef ENABLE_RGB_MATRIX_SOLID_SPLASH +# undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH // Fix RGB_MATRIX_STARTUP, because RGB_MATRIX_CYCLE_ALL is disabled. // The actual handling of RGB_EFFECTs is done in keymap.c diff --git a/keyboards/dztech/dz65rgb/keymaps/matthewrobo/config.h b/keyboards/dztech/dz65rgb/keymaps/matthewrobo/config.h index a56af01656..586e5765aa 100644 --- a/keyboards/dztech/dz65rgb/keymaps/matthewrobo/config.h +++ b/keyboards/dztech/dz65rgb/keymaps/matthewrobo/config.h @@ -9,43 +9,43 @@ #undef RGB_MATRIX_STARTUP_MODE #define RGB_MATRIX_FRAMEBUFFER_EFFECTS -// #define DISABLE_RGB_MATRIX_SOLID_COLOR -// #define DISABLE_RGB_MATRIX_ALPHAS_MODS -// #define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -// #define DISABLE_RGB_MATRIX_BREATHING -#define DISABLE_RGB_MATRIX_BAND_SAT -// #define DISABLE_RGB_MATRIX_BAND_VAL -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL -#define DISABLE_RGB_MATRIX_CYCLE_ALL -#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN -#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN -#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -#define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL -// #define DISABLE_RGB_MATRIX_CYCLE_SPIRAL -#define DISABLE_RGB_MATRIX_DUAL_BEACON -#define DISABLE_RGB_MATRIX_RAINBOW_BEACON -#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS -#define DISABLE_RGB_MATRIX_RAINDROPS -#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS -// #define DISABLE_RGB_MATRIX_TYPING_HEATMAP -#define DISABLE_RGB_MATRIX_DIGITAL_RAIN -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -// #define DISABLE_RGB_MATRIX_SPLASH -// #define DISABLE_RGB_MATRIX_MULTISPLASH -// #define DISABLE_RGB_MATRIX_SOLID_SPLASH -// #define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +// #undef ENABLE_RGB_MATRIX_SOLID_COLOR +// #undef ENABLE_RGB_MATRIX_ALPHAS_MODS +// #undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +// #undef ENABLE_RGB_MATRIX_BREATHING +#undef ENABLE_RGB_MATRIX_BAND_SAT +// #undef ENABLE_RGB_MATRIX_BAND_VAL +#undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#undef ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#undef ENABLE_RGB_MATRIX_CYCLE_ALL +#undef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#undef ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#undef ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#undef ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +// #undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#undef ENABLE_RGB_MATRIX_DUAL_BEACON +#undef ENABLE_RGB_MATRIX_RAINBOW_BEACON +#undef ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#undef ENABLE_RGB_MATRIX_RAINDROPS +#undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +// #undef ENABLE_RGB_MATRIX_TYPING_HEATMAP +#undef ENABLE_RGB_MATRIX_DIGITAL_RAIN +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// #undef ENABLE_RGB_MATRIX_SPLASH +// #undef ENABLE_RGB_MATRIX_MULTISPLASH +// #undef ENABLE_RGB_MATRIX_SOLID_SPLASH +// #undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #define QMK_KEYS_PER_SCAN 4 diff --git a/keyboards/dztech/dz65rgb/keymaps/via/config.h b/keyboards/dztech/dz65rgb/keymaps/via/config.h index 1beb7130f7..8ef0df8ee8 100644 --- a/keyboards/dztech/dz65rgb/keymaps/via/config.h +++ b/keyboards/dztech/dz65rgb/keymaps/via/config.h @@ -16,6 +16,6 @@ #pragma once -#define DISABLE_RGB_MATRIX_PIXEL_FLOW -#define DISABLE_RGB_MATRIX_PIXEL_FRACTAL -#define DISABLE_RGB_MATRIX_PIXEL_RAIN +#undef ENABLE_RGB_MATRIX_PIXEL_FLOW +#undef ENABLE_RGB_MATRIX_PIXEL_FRACTAL +#undef ENABLE_RGB_MATRIX_PIXEL_RAIN diff --git a/keyboards/dztech/dz65rgb/v1/config.h b/keyboards/dztech/dz65rgb/v1/config.h index 1ecd9002cb..5fe0ba3eba 100644 --- a/keyboards/dztech/dz65rgb/v1/config.h +++ b/keyboards/dztech/dz65rgb/v1/config.h @@ -53,22 +53,54 @@ # define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended # define RGB_MATRIX_KEYPRESSES -# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -# define DISABLE_RGB_MATRIX_BAND_SAT -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -# define DISABLE_RGB_MATRIX_SPLASH -# define DISABLE_RGB_MATRIX_MULTISPLASH -# define DISABLE_RGB_MATRIX_SOLID_SPLASH -# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH -# define DISABLE_RGB_MATRIX_DIGITAL_RAIN +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +// # define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +// # define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +// # define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +// # define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +// # define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// # define ENABLE_RGB_MATRIX_SPLASH +// # define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +// # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 # define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL # define DRIVER_ADDR_1 0b1110100 diff --git a/keyboards/dztech/dz65rgb/v2/config.h b/keyboards/dztech/dz65rgb/v2/config.h index 1e1e21f5e9..b8677e4436 100644 --- a/keyboards/dztech/dz65rgb/v2/config.h +++ b/keyboards/dztech/dz65rgb/v2/config.h @@ -53,22 +53,54 @@ # define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended # define RGB_MATRIX_KEYPRESSES -# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -# define DISABLE_RGB_MATRIX_BAND_SAT -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -# define DISABLE_RGB_MATRIX_SPLASH -# define DISABLE_RGB_MATRIX_MULTISPLASH -# define DISABLE_RGB_MATRIX_SOLID_SPLASH -# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH -# define DISABLE_RGB_MATRIX_DIGITAL_RAIN +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +// # define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +// # define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +// # define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +// # define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +// # define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// # define ENABLE_RGB_MATRIX_SPLASH +// # define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +// # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 # define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL # define DRIVER_ADDR_1 0b1110100 diff --git a/keyboards/dztech/dz65rgb/v3/config.h b/keyboards/dztech/dz65rgb/v3/config.h index 053b06fae1..ba7863f42a 100755 --- a/keyboards/dztech/dz65rgb/v3/config.h +++ b/keyboards/dztech/dz65rgb/v3/config.h @@ -47,6 +47,55 @@ # define RGB_MATRIX_KEYPRESSES # define RGB_MATRIX_LED_PROCESS_LIMIT 4 # define RGB_MATRIX_LED_FLUSH_LIMIT 26 +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + # define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL # define DRIVER_ADDR_1 0b0110000 # define DRIVER_COUNT 1 diff --git a/keyboards/ergodox_ez/config.h b/keyboards/ergodox_ez/config.h index 9dcfc341e1..c3b794f108 100644 --- a/keyboards/ergodox_ez/config.h +++ b/keyboards/ergodox_ez/config.h @@ -130,6 +130,54 @@ along with this program. If not, see . #define RGB_MATRIX_LED_FLUSH_LIMIT 26 #define RGB_DISABLE_WHEN_USB_SUSPENDED +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_PIXEL_RAIN +#define ENABLE_RGB_MATRIX_PIXEL_FLOW +#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH // #define RGBLIGHT_COLOR_LAYER_0 0x00, 0x00, 0xFF /* #define RGBLIGHT_COLOR_LAYER_1 0x00, 0x00, 0xFF */ diff --git a/keyboards/ergodox_infinity/config.h b/keyboards/ergodox_infinity/config.h index 5dcc707a5d..e6f1b81f54 100644 --- a/keyboards/ergodox_infinity/config.h +++ b/keyboards/ergodox_infinity/config.h @@ -79,6 +79,32 @@ along with this program. If not, see . #define LED_MATRIX_SPLIT { 38, 38 } #define LED_DISABLE_WHEN_USB_SUSPENDED +// LED Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_led_matrix?id=led-matrix-effects +#define ENABLE_LED_MATRIX_ALPHAS_MODS +#define ENABLE_LED_MATRIX_BREATHING +#define ENABLE_LED_MATRIX_BAND +#define ENABLE_LED_MATRIX_BAND_PINWHEEL +#define ENABLE_LED_MATRIX_BAND_SPIRAL +#define ENABLE_LED_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_LED_MATRIX_CYCLE_UP_DOWN +#define ENABLE_LED_MATRIX_CYCLE_OUT_IN +#define ENABLE_LED_MATRIX_DUAL_BEACON +#if defined(LED_MATRIX_KEYREACTIVE_ENABLED) +# define ENABLE_LED_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_LED_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_LED_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_LED_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_LED_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_LED_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_LED_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_LED_MATRIX_SPLASH +# define ENABLE_LED_MATRIX_MULTISPLASH +#endif +#define ENABLE_LED_MATRIX_WAVE_LEFT_RIGHT +#define ENABLE_LED_MATRIX_WAVE_UP_DOWN + /* i2c (for LED matrix) */ #define I2C1_CLOCK_SPEED 400000 #define I2C1_SCL_PAL_MODE PAL_MODE_ALTERNATIVE_2 diff --git a/keyboards/evyd13/atom47/rev5/config.h b/keyboards/evyd13/atom47/rev5/config.h index 07252537ac..383aa23789 100644 --- a/keyboards/evyd13/atom47/rev5/config.h +++ b/keyboards/evyd13/atom47/rev5/config.h @@ -157,6 +157,54 @@ along with this program. If not, see . // ADDR2 represents A3:A2 of the 7-bit address. // The result is: 0b101(ADDR2)(ADDR1) #define DRIVER_ADDR_1 0b1010000 - #define DRIVER_COUNT 1 #define DRIVER_LED_TOTAL 64 + +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_PIXEL_RAIN +#define ENABLE_RGB_MATRIX_PIXEL_FLOW +#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH diff --git a/keyboards/ferris/0_2/bling/config.h b/keyboards/ferris/0_2/bling/config.h index bed489ca08..4b2efd378d 100644 --- a/keyboards/ferris/0_2/bling/config.h +++ b/keyboards/ferris/0_2/bling/config.h @@ -32,3 +32,51 @@ along with this program. If not, see . #define DRIVER_2_LED_TOTAL 7 #define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_PIXEL_RAIN +#define ENABLE_RGB_MATRIX_PIXEL_FLOW +#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH diff --git a/keyboards/geekboards/macropad_v2/config.h b/keyboards/geekboards/macropad_v2/config.h index 4b0949ff95..cdb3a7dbe8 100644 --- a/keyboards/geekboards/macropad_v2/config.h +++ b/keyboards/geekboards/macropad_v2/config.h @@ -43,28 +43,59 @@ #ifdef RGB_MATRIX_ENABLE #define RGB_MATRIX_KEYPRESSES #define RGB_MATRIX_FRAMEBUFFER_EFFECTS -#define DISABLE_RGB_MATRIX_ALPHAS_MODS -#define DISABLE_RGB_MATRIX_BAND_SAT -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL -#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN -#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -#define DISABLE_RGB_MATRIX_CYCLE_SPIRAL -#define DISABLE_RGB_MATRIX_RAINBOW_BEACON -#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS -#define DISABLE_RGB_MATRIX_RAINDROPS -#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS -#define DISABLE_RGB_MATRIX_DIGITAL_RAIN -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +// # define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +// # define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +// # define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +// # define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +// # define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +// # define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +// # define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +// # define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +// # define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +// # define ENABLE_RGB_MATRIX_RAINBOW_BEACON +// # define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +// # define ENABLE_RGB_MATRIX_RAINDROPS +// # define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +// # define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH -#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_UP_DOWN -#define RGB_MATRIX_STARTUP_SAT 255 -#define RGB_MATRIX_STARTUP_VAL 192 -#define RGB_MATRIX_STARTUP_SPD 30 +# define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_UP_DOWN +# define RGB_MATRIX_STARTUP_SAT 255 +# define RGB_MATRIX_STARTUP_VAL 192 +# define RGB_MATRIX_STARTUP_SPD 30 #endif //RGB_MATRIX_ENABLE #define RGB_DISABLE_WHEN_USB_SUSPENDED diff --git a/keyboards/geekboards/tester/config.h b/keyboards/geekboards/tester/config.h index 3e3daccd57..ac3b95c7e7 100644 --- a/keyboards/geekboards/tester/config.h +++ b/keyboards/geekboards/tester/config.h @@ -26,14 +26,59 @@ #define RGB_DISABLE_AFTER_TIMEOUT 0 #define RGB_DISABLE_WHEN_USB_SUSPENDED #define RGB_MATRIX_KEYPRESSES -#define DISABLE_RGB_MATRIX_SPLASH -#define DISABLE_RGB_MATRIX_MULTISPLASH -#define DISABLE_RGB_MATRIX_SOLID_SPLASH -#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH -#define DRIVER_ADDR_1 0b1110100 -#define DRIVER_ADDR_2 0b1110101 -#define DRIVER_COUNT 2 -#define DRIVER_1_LED_TOTAL 8 -#define DRIVER_2_LED_TOTAL 0 -#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// # define ENABLE_RGB_MATRIX_SPLASH +// # define ENABLE_RGB_MATRIX_MULTISPLASH +// # define ENABLE_RGB_MATRIX_SOLID_SPLASH +// # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + +# define DRIVER_ADDR_1 0b1110100 +# define DRIVER_ADDR_2 0b1110101 +# define DRIVER_COUNT 2 +# define DRIVER_1_LED_TOTAL 8 +# define DRIVER_2_LED_TOTAL 0 +# define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) #endif diff --git a/keyboards/gmmk/pro/ansi/keymaps/stickandgum/config.h b/keyboards/gmmk/pro/ansi/keymaps/stickandgum/config.h index 2566fc6f9c..78ff96f8b7 100644 --- a/keyboards/gmmk/pro/ansi/keymaps/stickandgum/config.h +++ b/keyboards/gmmk/pro/ansi/keymaps/stickandgum/config.h @@ -31,45 +31,45 @@ #define RGB_MATRIX_KEYPRESSES // REACTIVE, SPLASH modes // Soon we need to ENABLE modes by DEFAULT soon as per: https://github.com/qmk/qmk_firmware/pull/13758 Thanks @noroadsleft - // #define DISABLE_RGB_MATRIX_SOLID_COLOR // BUILT IN (MAPPED!) Static single color. - // #define DISABLE_RGB_MATRIX_ALPHAS_MODS // Accenting various keys on the keyboard. - // #define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN // Top down rainbow! - #define DISABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT // Left Right Rainbow (the top-down is better imho). - // #define DISABLE_RGB_MATRIX_BREATHING // Built in (MAPPED!) - // #define DISABLE_RGB_MATRIX_BAND_SAT // Single hue band fading saturation scrolling left to right (with white) - // #define DISABLE_RGB_MATRIX_BAND_VAL // Single hue band fading brightness scrolling left to right (with black) - #define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT // Single hue 3 blade spinning pinwheel fades sat (RGB_MATRIX_CYCLE_PINWHEEL) - #define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL // See above - #define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT // See above - // #define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL // Single hue spinning spiral fades brightness (with black) - #define DISABLE_RGB_MATRIX_CYCLE_ALL // Full keyboard cycling through rainbow - // #define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT // BUILT IN (MAPPED!) Full Rainbow Left to Right - #define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN // Full gradient scrolling top to bottom - #define DISABLE_RGB_MATRIX_CYCLE_OUT_IN // Rainbow circles coming to center. - #define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL // Two Rainbow circles coming to 1/3 and 2/3 points. - #define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON // Full gradent Chevron shapped scrolling left to right - // #define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL // BUILT IN (MAPPED!) - Consider disabling this - my poor eyes. - #define DISABLE_RGB_MATRIX_CYCLE_SPIRAL // Full gradient spinning spiral around center of keyboard - #define DISABLE_RGB_MATRIX_DUAL_BEACON // Two rainbows spinning around keyboards - #define DISABLE_RGB_MATRIX_RAINBOW_BEACON // Similar to above. - #define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS // Enough of the spinning rainbows - we get it! :-) - #define DISABLE_RGB_MATRIX_RAINDROPS // Jellybeans are better. - // #define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS // Randomly changes a single key's hue and saturation - better than above. - #define DISABLE_RGB_MATRIX_HUE_BREATHING // Hue shifts up a slight ammount at the same time, then shifts back - #define DISABLE_RGB_MATRIX_HUE_PENDULUM // Hue shifts up a slight ammount in a wave to the right, then back to the left - #define DISABLE_RGB_MATRIX_HUE_WAVE // Hue shifts up a slight ammount and then back down in a wave to the right - // #define DISABLE_RGB_MATRIX_TYPING_HEATMAP // Hot keys! - // #define DISABLE_RGB_MATRIX_DIGITAL_RAIN // The Matrix! - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE // Key hits shown in current hue - all other keys black: wide slightly better imo - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE // Key hits shown in current hue - all other keys shifted hue - // #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE // Hue & value pulse around a single key hit then fades value out (black otherwise) - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE // same as above but a bit too intense imo. - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS // Column and Row single color fade. - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS // Column and Row single color fade. (Multi-keys) - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS // Hue & value pulse away on the same column and row of key hit then fades - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS // Hue & value pulse away on the same column and row of multi-key hit then fades - #define DISABLE_RGB_MATRIX_SPLASH // Full rainbow pulses from key hit. All else black. - #define DISABLE_RGB_MATRIX_MULTISPLASH // Full rainbow pulses from multi-keys. All else black. - #define DISABLE_RGB_MATRIX_SOLID_SPLASH // Single color pulses from key hit. All else black. (Using solid_reactive_wide instead). - #define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH // Single color pulses from muli-keys. All else black. (Using solid_reactive_wide instead). +// #undef ENABLE_RGB_MATRIX_SOLID_COLOR // BUILT IN (MAPPED!) Static single color. +// #undef ENABLE_RGB_MATRIX_ALPHAS_MODS // Accenting various keys on the keyboard. +// #undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN // Top down rainbow! +# undef ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT // Left Right Rainbow (the top-down is better imho). + // #undef ENABLE_RGB_MATRIX_BREATHING // Built in (MAPPED!) + // #undef ENABLE_RGB_MATRIX_BAND_SAT // Single hue band fading saturation scrolling left to right (with white) + // #undef ENABLE_RGB_MATRIX_BAND_VAL // Single hue band fading brightness scrolling left to right (with black) +# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT // Single hue 3 blade spinning pinwheel fades sat (RGB_MATRIX_CYCLE_PINWHEEL) +# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL // See above +# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT // See above + // #undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL // Single hue spinning spiral fades brightness (with black) +# undef ENABLE_RGB_MATRIX_CYCLE_ALL // Full keyboard cycling through rainbow + // #undef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT // BUILT IN (MAPPED!) Full Rainbow Left to Right +# undef ENABLE_RGB_MATRIX_CYCLE_UP_DOWN // Full gradient scrolling top to bottom +# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN // Rainbow circles coming to center. +# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL // Two Rainbow circles coming to 1/3 and 2/3 points. +# undef ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON // Full gradent Chevron shapped scrolling left to right + // #undef ENABLE_RGB_MATRIX_CYCLE_PINWHEEL // BUILT IN (MAPPED!) - Consider disabling this - my poor eyes. +# undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL // Full gradient spinning spiral around center of keyboard +# undef ENABLE_RGB_MATRIX_DUAL_BEACON // Two rainbows spinning around keyboards +# undef ENABLE_RGB_MATRIX_RAINBOW_BEACON // Similar to above. +# undef ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS // Enough of the spinning rainbows - we get it! :-) +# undef ENABLE_RGB_MATRIX_RAINDROPS // Jellybeans are better. + // #undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS // Randomly changes a single key's hue and saturation - better than above. +# undef ENABLE_RGB_MATRIX_HUE_BREATHING // Hue shifts up a slight ammount at the same time, then shifts back +# undef ENABLE_RGB_MATRIX_HUE_PENDULUM // Hue shifts up a slight ammount in a wave to the right, then back to the left +# undef ENABLE_RGB_MATRIX_HUE_WAVE // Hue shifts up a slight ammount and then back down in a wave to the right + // #undef ENABLE_RGB_MATRIX_TYPING_HEATMAP // Hot keys! + // #undef ENABLE_RGB_MATRIX_DIGITAL_RAIN // The Matrix! +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE // Key hits shown in current hue - all other keys black: wide slightly better imo +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE // Key hits shown in current hue - all other keys shifted hue + // #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE // Hue & value pulse around a single key hit then fades value out (black otherwise) +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE // same as above but a bit too intense imo. +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS // Column and Row single color fade. +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS // Column and Row single color fade. (Multi-keys) +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS // Hue & value pulse away on the same column and row of key hit then fades +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS // Hue & value pulse away on the same column and row of multi-key hit then fades +# undef ENABLE_RGB_MATRIX_SPLASH // Full rainbow pulses from key hit. All else black. +# undef ENABLE_RGB_MATRIX_MULTISPLASH // Full rainbow pulses from multi-keys. All else black. +# undef ENABLE_RGB_MATRIX_SOLID_SPLASH // Single color pulses from key hit. All else black. (Using solid_reactive_wide instead). +# undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH // Single color pulses from muli-keys. All else black. (Using solid_reactive_wide instead). #endif diff --git a/keyboards/gmmk/pro/config.h b/keyboards/gmmk/pro/config.h index 693b86539b..bb2cca1921 100644 --- a/keyboards/gmmk/pro/config.h +++ b/keyboards/gmmk/pro/config.h @@ -65,6 +65,55 @@ #define DRIVER_COUNT 2 +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_PIXEL_RAIN +#define ENABLE_RGB_MATRIX_PIXEL_FLOW +#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + /* 1000Hz USB polling - it's the default on stock firmware */ #define USB_POLLING_INTERVAL_MS 1 diff --git a/keyboards/handwired/colorlice/config.h b/keyboards/handwired/colorlice/config.h index 0148817f3f..6fdd87ccf5 100644 --- a/keyboards/handwired/colorlice/config.h +++ b/keyboards/handwired/colorlice/config.h @@ -55,3 +55,52 @@ along with this program. If not, see . #define RGB_MATRIX_LED_PROCESS_LIMIT 4 #define RGB_MATRIX_LED_FLUSH_LIMIT 26 #define DRIVER_LED_TOTAL 70 + +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_PIXEL_RAIN +#define ENABLE_RGB_MATRIX_PIXEL_FLOW +#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH diff --git a/keyboards/handwired/hnah108/config.h b/keyboards/handwired/hnah108/config.h index b21ba10934..b08f24ed86 100644 --- a/keyboards/handwired/hnah108/config.h +++ b/keyboards/handwired/hnah108/config.h @@ -56,6 +56,54 @@ along with this program. If not, see . #define RGB_DI_PIN E2 #define DRIVER_LED_TOTAL 31 +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_PIXEL_RAIN +#define ENABLE_RGB_MATRIX_PIXEL_FLOW +#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 diff --git a/keyboards/handwired/hnah40rgb/config.h b/keyboards/handwired/hnah40rgb/config.h index 3d558f97fc..8204550d00 100644 --- a/keyboards/handwired/hnah40rgb/config.h +++ b/keyboards/handwired/hnah40rgb/config.h @@ -64,4 +64,52 @@ along with this program. If not, see . #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #endif diff --git a/keyboards/handwired/p65rgb/config.h b/keyboards/handwired/p65rgb/config.h index 142d3c03ea..2ff3da8119 100644 --- a/keyboards/handwired/p65rgb/config.h +++ b/keyboards/handwired/p65rgb/config.h @@ -47,6 +47,54 @@ along with this program. If not, see . #define RGB_MATRIX_LED_FLUSH_LIMIT 26 #define DRIVER_LED_TOTAL 83 #define RGBLIGHT_LIMIT_VAL 180 +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_PIXEL_RAIN +#define ENABLE_RGB_MATRIX_PIXEL_FLOW +#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 diff --git a/keyboards/hs60/v1/config.h b/keyboards/hs60/v1/config.h index 41246b6ee8..b3444db38d 100644 --- a/keyboards/hs60/v1/config.h +++ b/keyboards/hs60/v1/config.h @@ -134,3 +134,52 @@ along with this program. If not, see . #endif #define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) + +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_PIXEL_RAIN +#define ENABLE_RGB_MATRIX_PIXEL_FLOW +#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH diff --git a/keyboards/hub20/config.h b/keyboards/hub20/config.h index fa78db3d97..de2526522c 100644 --- a/keyboards/hub20/config.h +++ b/keyboards/hub20/config.h @@ -1,5 +1,5 @@ /* -Copyright 2020 joshajohnson +Copyright 2020 joshajohnson Copyright 2021 peepeetee This program is free software: you can redistribute it and/or modify @@ -51,47 +51,54 @@ along with this program. If not, see . #define RGB_MATRIX_FRAMEBUFFER_EFFECTS #define RGB_MATRIX_KEYPRESSES -// This list in in the correct mode order. Next mode is the following line, previous mode is previous line. Loops around. -// #define DISABLE_RGB_MATRIX_SOLID_COLOR // Static single hue, no speed support -#define DISABLE_RGB_MATRIX_ALPHAS_MODS // Static dual hue, speed is hue for secondary hue -//#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN // Static gradient top to bottom, speed controls how much gradient changes -//#define DISABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT // Static gradient top to bottom, speed controls how much gradient changes -//#define DISABLE_RGB_MATRIX_BREATHING // Single hue brightness cycling animation -#define DISABLE_RGB_MATRIX_BAND_SAT // Single hue band fading saturation scrolling left to right -#define DISABLE_RGB_MATRIX_BAND_VAL // Single hue band fading brightness scrolling left to right -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT // Single hue 3 blade spinning pinwheel fades saturation -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL // Single hue 3 blade spinning pinwheel fades brightness -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT // Single hue spinning spiral fades saturation -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL // Single hue spinning spiral fades brightness -#define DISABLE_RGB_MATRIX_CYCLE_ALL // Full keyboard solid hue cycling through full gradient -//#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT // Full gradient scrolling left to right -//#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN // Full gradient scrolling top to bottom -#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON // Full gradent Chevron shapped scrolling left to right -#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN // Full gradient scrolling out to in -#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL // Full dual gradients scrolling out to in -#define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL // Full gradient spinning pinwheel around center of keyboard -#define DISABLE_RGB_MATRIX_CYCLE_SPIRAL // Full gradient spinning spiral around center of keyboard -#define DISABLE_RGB_MATRIX_DUAL_BEACON // Full gradient spinning around center of keyboard -#define DISABLE_RGB_MATRIX_RAINBOW_BEACON // Full tighter gradient spinning around center of keyboard -#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS // Full dual gradients spinning two halfs of keyboard -//#define DISABLE_RGB_MATRIX_RAINDROPS // Randomly changes a single key's hue -//#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS // Randomly changes a single key's hue and saturation -// =================================================== Requires RGB_MATRIX_FRAMEBUFFER_EFFECTS ============================================================= -// #define DISABLE_RGB_MATRIX_TYPING_HEATMAP // How hot is your WPM! -//#define DISABLE_RGB_MATRIX_DIGITAL_RAIN // That famous computer simulation -// =================================================== RGB_MATRIX_KEYPRESSES OR RGB_MATRIX_KEYRELEASES ===================================================== -//#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE // Pulses keys hit to hue & value then fades value out -//#define DISABLE_RGB_MATRIX_SOLID_REACTIVE // Static single hue, pulses keys hit to shifted hue then fades to current hue -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE // Hue & value pulse near a single key hit then fades value out -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE // Hue & value pulse near multiple key hits then fades value out -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS // Hue & value pulse the same column and row of a single key hit then fades value out -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS // Hue & value pulse the same column and row of multiple key hits then fades value out -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS // Hue & value pulse away on the same column and row of a single key hit then fades value out -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS // Hue & value pulse away on the same column and row of multiple key hits then fades value out -#define DISABLE_RGB_MATRIX_SPLASH // Full gradient & value pulse away from a single key hit then fades value out -#define DISABLE_RGB_MATRIX_MULTISPLASH // Full gradient & value pulse away from multiple key hits then fades value out -#define DISABLE_RGB_MATRIX_SOLID_SPLASH // Hue & value pulse away from a single key hit then fades value out -#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH // Hue & value pulse away from multiple key hits then fades value out +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +// #define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +// #define ENABLE_RGB_MATRIX_BAND_SAT +// #define ENABLE_RGB_MATRIX_BAND_VAL +// #define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +// #define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +// #define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +// #define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +// #define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +// #define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +// #define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +// #define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +// #define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +// #define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +// #define ENABLE_RGB_MATRIX_DUAL_BEACON +// #define ENABLE_RGB_MATRIX_RAINBOW_BEACON +// #define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_PIXEL_RAIN +#define ENABLE_RGB_MATRIX_PIXEL_FLOW +#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// #define ENABLE_RGB_MATRIX_SPLASH +// #define ENABLE_RGB_MATRIX_MULTISPLASH +// #define ENABLE_RGB_MATRIX_SOLID_SPLASH +// #define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 diff --git a/keyboards/inett_studio/sqx/hotswap/config.h b/keyboards/inett_studio/sqx/hotswap/config.h index 174b948c1d..f516473cfa 100644 --- a/keyboards/inett_studio/sqx/hotswap/config.h +++ b/keyboards/inett_studio/sqx/hotswap/config.h @@ -72,6 +72,51 @@ #endif #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 170 -#define DISABLE_RGB_MATRIX_BAND_VAL -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +// #define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +// #define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +// #define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_PIXEL_RAIN +#define ENABLE_RGB_MATRIX_PIXEL_FLOW +#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH diff --git a/keyboards/inett_studio/sqx/universal/config.h b/keyboards/inett_studio/sqx/universal/config.h index 7fa41fae24..d1fbf8f7a1 100644 --- a/keyboards/inett_studio/sqx/universal/config.h +++ b/keyboards/inett_studio/sqx/universal/config.h @@ -72,6 +72,51 @@ #endif #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 170 -#define DISABLE_RGB_MATRIX_BAND_VAL -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +// #define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +// #define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +// #define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_PIXEL_RAIN +#define ENABLE_RGB_MATRIX_PIXEL_FLOW +#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH diff --git a/keyboards/kbdfans/bella/rgb/config.h b/keyboards/kbdfans/bella/rgb/config.h index 7d93ecb8d7..c412411133 100644 --- a/keyboards/kbdfans/bella/rgb/config.h +++ b/keyboards/kbdfans/bella/rgb/config.h @@ -42,9 +42,54 @@ #define RGB_MATRIX_FRAMEBUFFER_EFFECTS #define RGB_MATRIX_LED_PROCESS_LIMIT 4 #define RGB_MATRIX_LED_FLUSH_LIMIT 26 -#define DISABLE_RGB_MATRIX_SPLASH -#define DISABLE_RGB_MATRIX_MULTISPLASH -#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// # define ENABLE_RGB_MATRIX_SPLASH +// # define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +// # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH //#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL #define DRIVER_ADDR_1 0b0110000 diff --git a/keyboards/kbdfans/bella/rgb_iso/config.h b/keyboards/kbdfans/bella/rgb_iso/config.h index 9d931cbe85..ca43d80708 100644 --- a/keyboards/kbdfans/bella/rgb_iso/config.h +++ b/keyboards/kbdfans/bella/rgb_iso/config.h @@ -42,9 +42,54 @@ #define RGB_MATRIX_FRAMEBUFFER_EFFECTS #define RGB_MATRIX_LED_PROCESS_LIMIT 4 #define RGB_MATRIX_LED_FLUSH_LIMIT 26 -#define DISABLE_RGB_MATRIX_SPLASH -#define DISABLE_RGB_MATRIX_MULTISPLASH -#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// # define ENABLE_RGB_MATRIX_SPLASH +// # define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +// # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH //#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL #define DRIVER_ADDR_1 0b0110000 diff --git a/keyboards/kbdfans/boop65/rgb/config.h b/keyboards/kbdfans/boop65/rgb/config.h index ba9c627c15..0d67db2110 100644 --- a/keyboards/kbdfans/boop65/rgb/config.h +++ b/keyboards/kbdfans/boop65/rgb/config.h @@ -56,6 +56,50 @@ # define DRIVER_COUNT 1 # define DRIVER_LED_TOTAL 83 # define DRIVER_INDICATOR_LED_TOTAL 0 +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_FRACTAL +#define ENABLE_RGB_MATRIX_PIXEL_RAIN + +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN + +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #endif -#define VIA_EEPROM_LAYOUT_OPTIONS_SIZE 2 \ No newline at end of file +#define VIA_EEPROM_LAYOUT_OPTIONS_SIZE 2 diff --git a/keyboards/kbdfans/kbd67/mkiirgb/v1/config.h b/keyboards/kbdfans/kbd67/mkiirgb/v1/config.h index b0b7e1dad2..d88d384f98 100644 --- a/keyboards/kbdfans/kbd67/mkiirgb/v1/config.h +++ b/keyboards/kbdfans/kbd67/mkiirgb/v1/config.h @@ -18,22 +18,55 @@ #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended #define RGB_MATRIX_KEYPRESSES -#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -#define DISABLE_RGB_MATRIX_BAND_SAT -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -#define DISABLE_RGB_MATRIX_SPLASH -#define DISABLE_RGB_MATRIX_MULTISPLASH -#define DISABLE_RGB_MATRIX_SOLID_SPLASH -#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH -#define DISABLE_RGB_MATRIX_DIGITAL_RAIN +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +// #define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +// #define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +// #define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +// #define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_PIXEL_RAIN +#define ENABLE_RGB_MATRIX_PIXEL_FLOW +#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +// #define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// #define ENABLE_RGB_MATRIX_SPLASH +// #define ENABLE_RGB_MATRIX_MULTISPLASH +// #define ENABLE_RGB_MATRIX_SOLID_SPLASH +// #define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL #define DRIVER_ADDR_1 0b1110100 diff --git a/keyboards/kbdfans/kbd67/mkiirgb/v2/config.h b/keyboards/kbdfans/kbd67/mkiirgb/v2/config.h index 51e732f101..ffdace7a5f 100644 --- a/keyboards/kbdfans/kbd67/mkiirgb/v2/config.h +++ b/keyboards/kbdfans/kbd67/mkiirgb/v2/config.h @@ -19,29 +19,59 @@ #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended #define RGB_MATRIX_KEYPRESSES #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL -#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -#define DISABLE_RGB_MATRIX_BAND_SAT -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -#define DISABLE_RGB_MATRIX_SPLASH -#define DISABLE_RGB_MATRIX_MULTISPLASH -#define DISABLE_RGB_MATRIX_SOLID_SPLASH -#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH -#define DISABLE_RGB_MATRIX_DIGITAL_RAIN -#define DISABLE_RGB_MATRIX_RAINDROPS -#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS -#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 -#define DRIVER_ADDR_1 0b1110100 -#define DRIVER_ADDR_2 0b1110111 -#define DRIVER_COUNT 2 -#define DRIVER_1_LED_TOTAL 35 -#define DRIVER_2_LED_TOTAL 32 -#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +// #define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +// #define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +// #define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +// #define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +// #define ENABLE_RGB_MATRIX_RAINDROPS +// #define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +// #define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// #define ENABLE_RGB_MATRIX_SPLASH +// #define ENABLE_RGB_MATRIX_MULTISPLASH +// #define ENABLE_RGB_MATRIX_SOLID_SPLASH +// #define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH +# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 +# define DRIVER_ADDR_1 0b1110100 +# define DRIVER_ADDR_2 0b1110111 +# define DRIVER_COUNT 2 +# define DRIVER_1_LED_TOTAL 35 +# define DRIVER_2_LED_TOTAL 32 +# define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) #endif diff --git a/keyboards/kbdfans/kbd67/mkiirgb/v3/config.h b/keyboards/kbdfans/kbd67/mkiirgb/v3/config.h index 7111bd5faf..5b50c415ae 100755 --- a/keyboards/kbdfans/kbd67/mkiirgb/v3/config.h +++ b/keyboards/kbdfans/kbd67/mkiirgb/v3/config.h @@ -45,24 +45,55 @@ #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended #define USB_SUSPEND_WAKEUP_DELAY 5000 #define RGB_MATRIX_KEYPRESSES -#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -#define DISABLE_RGB_MATRIX_BAND_SAT -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -#define DISABLE_RGB_MATRIX_SPLASH -#define DISABLE_RGB_MATRIX_MULTISPLASH -#define DISABLE_RGB_MATRIX_SOLID_SPLASH -#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH -#define DISABLE_RGB_MATRIX_DIGITAL_RAIN -#define DISABLE_RGB_MATRIX_RAINDROPS -#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +// #define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +// #define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +// #define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +// #define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +// #define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// #define ENABLE_RGB_MATRIX_SPLASH +// #define ENABLE_RGB_MATRIX_MULTISPLASH +// #define ENABLE_RGB_MATRIX_SOLID_SPLASH +// #define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + #define RGB_MATRIX_LED_PROCESS_LIMIT 4 #define RGB_MATRIX_LED_FLUSH_LIMIT 26 #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL diff --git a/keyboards/kbdfans/kbdmini/config.h b/keyboards/kbdfans/kbdmini/config.h index beb0637adc..f2137fcd1f 100644 --- a/keyboards/kbdfans/kbdmini/config.h +++ b/keyboards/kbdfans/kbdmini/config.h @@ -38,21 +38,55 @@ #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended #define RGB_MATRIX_KEYPRESSES #define RGB_MATRIX_FRAMEBUFFER_EFFECTS -#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -#define DISABLE_RGB_MATRIX_BAND_SAT -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -#define DISABLE_RGB_MATRIX_SPLASH -#define DISABLE_RGB_MATRIX_MULTISPLASH -#define DISABLE_RGB_MATRIX_SOLID_SPLASH -#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH -#define DISABLE_RGB_MATRIX_DIGITAL_RAIN +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +// #define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +// #define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +// #define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +// #define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +// #define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// #define ENABLE_RGB_MATRIX_SPLASH +// #define ENABLE_RGB_MATRIX_MULTISPLASH +// #define ENABLE_RGB_MATRIX_SOLID_SPLASH +// #define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + #define DRIVER_ADDR_1 0b1010000 #define DRIVER_COUNT 1 #define DRIVER_LED_TOTAL 52 diff --git a/keyboards/kbdfans/maja/config.h b/keyboards/kbdfans/maja/config.h index 3722c8381d..19a5e1dfa4 100755 --- a/keyboards/kbdfans/maja/config.h +++ b/keyboards/kbdfans/maja/config.h @@ -20,22 +20,55 @@ #define RGB_DISABLE_AFTER_TIMEOUT 0 #define RGB_DISABLE_WHEN_USB_SUSPENDED #define RGB_MATRIX_KEYPRESSES -#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -#define DISABLE_RGB_MATRIX_BAND_SAT -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -#define DISABLE_RGB_MATRIX_SPLASH -#define DISABLE_RGB_MATRIX_MULTISPLASH -#define DISABLE_RGB_MATRIX_SOLID_SPLASH -#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH -#define DISABLE_RGB_MATRIX_DIGITAL_RAIN +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +// #define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +// #define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +// #define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +// #define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_PIXEL_RAIN +#define ENABLE_RGB_MATRIX_PIXEL_FLOW +#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +// #define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// #define ENABLE_RGB_MATRIX_SPLASH +// #define ENABLE_RGB_MATRIX_MULTISPLASH +// #define ENABLE_RGB_MATRIX_SOLID_SPLASH +// #define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL #define DRIVER_ADDR_1 0b1110100 #define DRIVER_ADDR_2 0b1110110 diff --git a/keyboards/keebio/bdn9/rev2/config.h b/keyboards/keebio/bdn9/rev2/config.h index d4a252a301..f9eb3babca 100644 --- a/keyboards/keebio/bdn9/rev2/config.h +++ b/keyboards/keebio/bdn9/rev2/config.h @@ -55,6 +55,54 @@ along with this program. If not, see . // RGB Matrix # ifdef RGB_MATRIX_ENABLE # define DRIVER_LED_TOTAL RGBLED_NUM +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH # endif #endif diff --git a/keyboards/keebio/stick/config.h b/keyboards/keebio/stick/config.h index 0a43bb8611..cd641ea28b 100644 --- a/keyboards/keebio/stick/config.h +++ b/keyboards/keebio/stick/config.h @@ -52,6 +52,54 @@ along with this program. If not, see . // RGB Matrix # ifdef RGB_MATRIX_ENABLE # define DRIVER_LED_TOTAL RGBLED_NUM +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH # endif #endif diff --git a/keyboards/keyboardio/model01/config.h b/keyboards/keyboardio/model01/config.h index a08b989467..30538c56f1 100644 --- a/keyboards/keyboardio/model01/config.h +++ b/keyboards/keyboardio/model01/config.h @@ -35,3 +35,52 @@ along with this program. If not, see . /* RGB matrix constants */ #define DRIVER_LED_TOTAL 64 + +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_PIXEL_RAIN +#define ENABLE_RGB_MATRIX_PIXEL_FLOW +#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH diff --git a/keyboards/keychron/q1/config.h b/keyboards/keychron/q1/config.h index 2a8665c1b4..149280161f 100644 --- a/keyboards/keychron/q1/config.h +++ b/keyboards/keychron/q1/config.h @@ -46,18 +46,51 @@ /* NKRO */ #define FORCE_NKRO -/* Disable a single effect */ -#define DISABLE_RGB_MATRIX_ALPHAS_MODS -#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -#define DISABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT -#define DISABLE_RGB_MATRIX_BAND_SAT -#define DISABLE_RGB_MATRIX_BAND_VAL -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL -#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS -#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS -#define DISABLE_RGB_MATRIX_HUE_BREATHING -#define DISABLE_RGB_MATRIX_HUE_PENDULUM -#define DISABLE_RGB_MATRIX_HUE_WAVE \ No newline at end of file +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +// #define ENABLE_RGB_MATRIX_ALPHAS_MODS +// #define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +// #define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +// #define ENABLE_RGB_MATRIX_BAND_SAT +// #define ENABLE_RGB_MATRIX_BAND_VAL +// #define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +// #define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +// #define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +// #define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +// #define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +// #define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +// #define ENABLE_RGB_MATRIX_HUE_BREATHING +// #define ENABLE_RGB_MATRIX_HUE_PENDULUM +// #define ENABLE_RGB_MATRIX_HUE_WAVE +// #define ENABLE_RGB_MATRIX_PIXEL_RAIN +// #define ENABLE_RGB_MATRIX_PIXEL_FLOW +// #define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH diff --git a/keyboards/kprepublic/bm40hsrgb/config.h b/keyboards/kprepublic/bm40hsrgb/config.h index 554927a496..8790de8a7b 100755 --- a/keyboards/kprepublic/bm40hsrgb/config.h +++ b/keyboards/kprepublic/bm40hsrgb/config.h @@ -54,4 +54,52 @@ #ifdef RGB_MATRIX_ENABLE # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 180 // Limit to vendor-recommended value +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #endif diff --git a/keyboards/kprepublic/bm40hsrgb/keymaps/gabustoledo/config.h b/keyboards/kprepublic/bm40hsrgb/keymaps/gabustoledo/config.h index 9047c260d1..b38e4b8fc6 100644 --- a/keyboards/kprepublic/bm40hsrgb/keymaps/gabustoledo/config.h +++ b/keyboards/kprepublic/bm40hsrgb/keymaps/gabustoledo/config.h @@ -1,18 +1,18 @@ #pragma once /* Copyright 2021 Gabriel Bustamante Toledo - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ // default but used in macros @@ -66,26 +66,26 @@ #ifdef RGB_MATRIX_ENABLE -#define DISABLE_RGB_MATRIX_ALPHAS_MODS -#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -#define DISABLE_RGB_MATRIX_BREATHING -#define DISABLE_RGB_MATRIX_BAND_SAT -#define DISABLE_RGB_MATRIX_BAND_VAL -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL -#define DISABLE_RGB_MATRIX_CYCLE_ALL -#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN -#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN -#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -#define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL -#define DISABLE_RGB_MATRIX_CYCLE_SPIRAL -#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# undef ENABLE_RGB_MATRIX_ALPHAS_MODS +# undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# undef ENABLE_RGB_MATRIX_BREATHING +# undef ENABLE_RGB_MATRIX_BAND_SAT +# undef ENABLE_RGB_MATRIX_BAND_VAL +# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# undef ENABLE_RGB_MATRIX_CYCLE_ALL +# undef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# undef ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# undef ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS -#undef RGB_MATRIX_STARTUP_MODE +# undef RGB_MATRIX_STARTUP_MODE -#define RGBLIGHT_HUE_STEP 20 +# define RGBLIGHT_HUE_STEP 20 -#endif \ No newline at end of file +#endif diff --git a/keyboards/kprepublic/bm40hsrgb/keymaps/signynt/config.h b/keyboards/kprepublic/bm40hsrgb/keymaps/signynt/config.h index 9fcddca2cb..2b0d0961c4 100644 --- a/keyboards/kprepublic/bm40hsrgb/keymaps/signynt/config.h +++ b/keyboards/kprepublic/bm40hsrgb/keymaps/signynt/config.h @@ -36,45 +36,45 @@ //-------------------------------------------------------------------------------------------------------- //disable broken animations -#define DISABLE_RGB_MATRIX_ALPHAS_MODS -#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -#define DISABLE_RGB_MATRIX_BREATHING -#define DISABLE_RGB_MATRIX_BAND_SAT -#define DISABLE_RGB_MATRIX_BAND_VAL -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL -#define DISABLE_RGB_MATRIX_CYCLE_ALL -#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN -#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN -#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -//#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -//#define DISABLE_RGB_MATRIX_DUAL_BEACON -#define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL -#define DISABLE_RGB_MATRIX_CYCLE_SPIRAL -//#define DISABLE_RGB_MATRIX_RAINBOW_BEACON -//#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS -//#define DISABLE_RGB_MATRIX_RAINDROPS -#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS // DO NOT ENABLE -//#define DISABLE_RGB_MATRIX_TYPING_HEATMAP -//#define DISABLE_RGB_MATRIX_DIGITAL_RAIN -//#define DISABLE_RGB_MATRIX_SOLID_REACTIVE -//#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -//#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -//#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -//#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -//#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -//#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -//#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -//#define DISABLE_RGB_MATRIX_SPLASH -//#define DISABLE_RGB_MATRIX_MULTISPLASH -//#define DISABLE_RGB_MATRIX_SOLID_SPLASH -//#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +# undef ENABLE_RGB_MATRIX_ALPHAS_MODS +# undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# undef ENABLE_RGB_MATRIX_BREATHING +# undef ENABLE_RGB_MATRIX_BAND_SAT +# undef ENABLE_RGB_MATRIX_BAND_VAL +# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# undef ENABLE_RGB_MATRIX_CYCLE_ALL +# undef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# undef ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +//#undef ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +//#undef ENABLE_RGB_MATRIX_DUAL_BEACON +# undef ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL +//#undef ENABLE_RGB_MATRIX_RAINBOW_BEACON +//#undef ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +//#undef ENABLE_RGB_MATRIX_RAINDROPS +# undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS // DO NOT ENABLE +//#undef ENABLE_RGB_MATRIX_TYPING_HEATMAP +//#undef ENABLE_RGB_MATRIX_DIGITAL_RAIN +//#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE +//#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +//#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +//#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +//#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +//#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +//#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +//#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +//#undef ENABLE_RGB_MATRIX_SPLASH +//#undef ENABLE_RGB_MATRIX_MULTISPLASH +//#undef ENABLE_RGB_MATRIX_SOLID_SPLASH +//#undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH -#undef RGB_MATRIX_STARTUP_MODE +# undef RGB_MATRIX_STARTUP_MODE -#define RGBLIGHT_HUE_STEP 20 +# define RGBLIGHT_HUE_STEP 20 #endif diff --git a/keyboards/kprepublic/bm40hsrgb/keymaps/signynt_2_loud/config.h b/keyboards/kprepublic/bm40hsrgb/keymaps/signynt_2_loud/config.h index 7cfbf0fde4..d39f6b95c8 100644 --- a/keyboards/kprepublic/bm40hsrgb/keymaps/signynt_2_loud/config.h +++ b/keyboards/kprepublic/bm40hsrgb/keymaps/signynt_2_loud/config.h @@ -36,45 +36,45 @@ //-------------------------------------------------------------------------------------------------------- //disable broken animations -#define DISABLE_RGB_MATRIX_ALPHAS_MODS -#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -#define DISABLE_RGB_MATRIX_BREATHING -#define DISABLE_RGB_MATRIX_BAND_SAT -#define DISABLE_RGB_MATRIX_BAND_VAL -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL -#define DISABLE_RGB_MATRIX_CYCLE_ALL -#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN -#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN -#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -//#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -//#define DISABLE_RGB_MATRIX_DUAL_BEACON -#define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL -#define DISABLE_RGB_MATRIX_CYCLE_SPIRAL -//#define DISABLE_RGB_MATRIX_RAINBOW_BEACON -//#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS -//#define DISABLE_RGB_MATRIX_RAINDROPS -#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS // DO NOT ENABLE -//#define DISABLE_RGB_MATRIX_TYPING_HEATMAP -//#define DISABLE_RGB_MATRIX_DIGITAL_RAIN -//#define DISABLE_RGB_MATRIX_SOLID_REACTIVE -//#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -//#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -//#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -//#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -//#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -//#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -//#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -//#define DISABLE_RGB_MATRIX_SPLASH -//#define DISABLE_RGB_MATRIX_MULTISPLASH -//#define DISABLE_RGB_MATRIX_SOLID_SPLASH -//#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +# undef ENABLE_RGB_MATRIX_ALPHAS_MODS +# undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# undef ENABLE_RGB_MATRIX_BREATHING +# undef ENABLE_RGB_MATRIX_BAND_SAT +# undef ENABLE_RGB_MATRIX_BAND_VAL +# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# undef ENABLE_RGB_MATRIX_CYCLE_ALL +# undef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# undef ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +//#undef ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +//#undef ENABLE_RGB_MATRIX_DUAL_BEACON +# undef ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL +//#undef ENABLE_RGB_MATRIX_RAINBOW_BEACON +//#undef ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +//#undef ENABLE_RGB_MATRIX_RAINDROPS +# undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS // DO NOT ENABLE +//#undef ENABLE_RGB_MATRIX_TYPING_HEATMAP +//#undef ENABLE_RGB_MATRIX_DIGITAL_RAIN +//#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE +//#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +//#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +//#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +//#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +//#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +//#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +//#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +//#undef ENABLE_RGB_MATRIX_SPLASH +//#undef ENABLE_RGB_MATRIX_MULTISPLASH +//#undef ENABLE_RGB_MATRIX_SOLID_SPLASH +//#undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH -#undef RGB_MATRIX_STARTUP_MODE +# undef RGB_MATRIX_STARTUP_MODE -#define RGBLIGHT_HUE_STEP 20 +# define RGBLIGHT_HUE_STEP 20 #endif diff --git a/keyboards/kprepublic/bm40hsrgb/keymaps/signynt_2_quiet/config.h b/keyboards/kprepublic/bm40hsrgb/keymaps/signynt_2_quiet/config.h index 4dd37189a9..a4634c581e 100644 --- a/keyboards/kprepublic/bm40hsrgb/keymaps/signynt_2_quiet/config.h +++ b/keyboards/kprepublic/bm40hsrgb/keymaps/signynt_2_quiet/config.h @@ -36,45 +36,45 @@ //-------------------------------------------------------------------------------------------------------- //disable broken animations -#define DISABLE_RGB_MATRIX_ALPHAS_MODS -#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -#define DISABLE_RGB_MATRIX_BREATHING -#define DISABLE_RGB_MATRIX_BAND_SAT -#define DISABLE_RGB_MATRIX_BAND_VAL -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL -#define DISABLE_RGB_MATRIX_CYCLE_ALL -#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN -#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN -#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -//#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -//#define DISABLE_RGB_MATRIX_DUAL_BEACON -#define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL -#define DISABLE_RGB_MATRIX_CYCLE_SPIRAL -//#define DISABLE_RGB_MATRIX_RAINBOW_BEACON -//#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS -//#define DISABLE_RGB_MATRIX_RAINDROPS -#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS // DO NOT ENABLE -//#define DISABLE_RGB_MATRIX_TYPING_HEATMAP -//#define DISABLE_RGB_MATRIX_DIGITAL_RAIN -//#define DISABLE_RGB_MATRIX_SOLID_REACTIVE -//#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -//#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -//#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -//#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -//#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -//#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -//#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -//#define DISABLE_RGB_MATRIX_SPLASH -//#define DISABLE_RGB_MATRIX_MULTISPLASH -//#define DISABLE_RGB_MATRIX_SOLID_SPLASH -//#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +# undef ENABLE_RGB_MATRIX_ALPHAS_MODS +# undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# undef ENABLE_RGB_MATRIX_BREATHING +# undef ENABLE_RGB_MATRIX_BAND_SAT +# undef ENABLE_RGB_MATRIX_BAND_VAL +# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# undef ENABLE_RGB_MATRIX_CYCLE_ALL +# undef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# undef ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +//#undef ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +//#undef ENABLE_RGB_MATRIX_DUAL_BEACON +# undef ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL +//#undef ENABLE_RGB_MATRIX_RAINBOW_BEACON +//#undef ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +//#undef ENABLE_RGB_MATRIX_RAINDROPS +# undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS // DO NOT ENABLE +//#undef ENABLE_RGB_MATRIX_TYPING_HEATMAP +//#undef ENABLE_RGB_MATRIX_DIGITAL_RAIN +//#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE +//#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +//#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +//#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +//#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +//#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +//#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +//#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +//#undef ENABLE_RGB_MATRIX_SPLASH +//#undef ENABLE_RGB_MATRIX_MULTISPLASH +//#undef ENABLE_RGB_MATRIX_SOLID_SPLASH +//#undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH -#undef RGB_MATRIX_STARTUP_MODE +# undef RGB_MATRIX_STARTUP_MODE -#define RGBLIGHT_HUE_STEP 20 +# define RGBLIGHT_HUE_STEP 20 #endif diff --git a/keyboards/kprepublic/bm60poker/rev1/config.h b/keyboards/kprepublic/bm60poker/rev1/config.h index 831a1a1b8c..06bd889053 100644 --- a/keyboards/kprepublic/bm60poker/rev1/config.h +++ b/keyboards/kprepublic/bm60poker/rev1/config.h @@ -70,4 +70,52 @@ along with this program. If not, see . #endif #ifdef RGB_MATRIX_ENABLE # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 180 // Limit to vendor-recommended value +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #endif diff --git a/keyboards/kprepublic/bm60rgb/rev1/config.h b/keyboards/kprepublic/bm60rgb/rev1/config.h index e445efd00c..fd1001e514 100644 --- a/keyboards/kprepublic/bm60rgb/rev1/config.h +++ b/keyboards/kprepublic/bm60rgb/rev1/config.h @@ -28,7 +28,7 @@ along with this program. If not, see . /* key matrix size */ #define MATRIX_ROWS 5 -#define MATRIX_COLS 14 +#define MATRIX_COLS 14 /* * Keyboard Matrix Assignments @@ -56,4 +56,52 @@ along with this program. If not, see . #endif #ifdef RGB_MATRIX_ENABLE # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 180 // Limit to vendor-recommended value +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #endif diff --git a/keyboards/kprepublic/bm60rgb_iso/rev1/config.h b/keyboards/kprepublic/bm60rgb_iso/rev1/config.h index 17cf1436d4..a9545cab90 100644 --- a/keyboards/kprepublic/bm60rgb_iso/rev1/config.h +++ b/keyboards/kprepublic/bm60rgb_iso/rev1/config.h @@ -72,4 +72,52 @@ along with this program. If not, see . #endif #ifdef RGB_MATRIX_ENABLE # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 180 // Limit to vendor-recommended value +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #endif diff --git a/keyboards/kprepublic/bm65iso/config.h b/keyboards/kprepublic/bm65iso/config.h index 2bec40f149..c6508b0817 100644 --- a/keyboards/kprepublic/bm65iso/config.h +++ b/keyboards/kprepublic/bm65iso/config.h @@ -55,18 +55,65 @@ along with this program. If not, see . #define RGBLIGHT_SAT_STEP 8 #define RGBLIGHT_VAL_STEP 8 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 140 -#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_BAND_SAT - #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ -/*== all animations enable ==*/ - #define RGBLIGHT_ANIMATIONS -// /*== or choose animations ==*/ -// #define RGBLIGHT_EFFECT_BREATHING -// #define RGBLIGHT_EFFECT_RAINBOW_MOOD -// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL -// #define RGBLIGHT_EFFECT_SNAKE -// #define RGBLIGHT_EFFECT_KNIGHT -// #define RGBLIGHT_EFFECT_CHRISTMAS -// #define RGBLIGHT_EFFECT_STATIC_GRADIENT -// #define RGBLIGHT_EFFECT_RGB_TEST -// #define RGBLIGHT_EFFECT_ALTERNATING +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + +# define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_BAND_SAT +# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ + /*== all animations enable ==*/ +# define RGBLIGHT_EFFECT_BREATHING +# define RGBLIGHT_EFFECT_RAINBOW_MOOD +# define RGBLIGHT_EFFECT_RAINBOW_SWIRL +# define RGBLIGHT_EFFECT_SNAKE +# define RGBLIGHT_EFFECT_KNIGHT +# define RGBLIGHT_EFFECT_CHRISTMAS +# define RGBLIGHT_EFFECT_STATIC_GRADIENT +# define RGBLIGHT_EFFECT_RGB_TEST +# define RGBLIGHT_EFFECT_ALTERNATING #endif diff --git a/keyboards/kprepublic/bm68rgb/config.h b/keyboards/kprepublic/bm68rgb/config.h index 48844c295f..580af57cf5 100644 --- a/keyboards/kprepublic/bm68rgb/config.h +++ b/keyboards/kprepublic/bm68rgb/config.h @@ -62,6 +62,54 @@ along with this program. If not, see . #endif #ifdef RGB_MATRIX_ENABLE # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 180 // Limit to vendor-recommended value +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ diff --git a/keyboards/kprepublic/bm68rgb/keymaps/peepeetee/config.h b/keyboards/kprepublic/bm68rgb/keymaps/peepeetee/config.h index aada255cd7..0748f83cdc 100644 --- a/keyboards/kprepublic/bm68rgb/keymaps/peepeetee/config.h +++ b/keyboards/kprepublic/bm68rgb/keymaps/peepeetee/config.h @@ -90,43 +90,43 @@ // #define RGBLIGHT_EFFECT_SNAKE_LENGTH 4 // The number of LEDs to light up for the "Snake" animation // This list in in the correct mode order. Next mode is the following line, previous mode is previous line. Loops around. -// #define DISABLE_RGB_MATRIX_SOLID_COLOR // Static single hue, no speed support -// #define DISABLE_RGB_MATRIX_ALPHAS_MODS // Static dual hue, speed is hue for secondary hue -#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN // Static gradient top to bottom, speed controls how much gradient changes -#define DISABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT // Static gradient top to bottom, speed controls how much gradient changes -#define DISABLE_RGB_MATRIX_BREATHING // Single hue brightness cycling animation -#define DISABLE_RGB_MATRIX_BAND_SAT // Single hue band fading saturation scrolling left to right -#define DISABLE_RGB_MATRIX_BAND_VAL // Single hue band fading brightness scrolling left to right -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT // Single hue 3 blade spinning pinwheel fades saturation -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL // Single hue 3 blade spinning pinwheel fades brightness -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT // Single hue spinning spiral fades saturation -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL // Single hue spinning spiral fades brightness -#define DISABLE_RGB_MATRIX_CYCLE_ALL // Full keyboard solid hue cycling through full gradient -//#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT // Full gradient scrolling left to right -#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN // Full gradient scrolling top to bottom -#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON // Full gradent Chevron shapped scrolling left to right -#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN // Full gradient scrolling out to in -#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL // Full dual gradients scrolling out to in -#define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL // Full gradient spinning pinwheel around center of keyboard -#define DISABLE_RGB_MATRIX_CYCLE_SPIRAL // Full gradient spinning spiral around center of keyboard -#define DISABLE_RGB_MATRIX_DUAL_BEACON // Full gradient spinning around center of keyboard -#define DISABLE_RGB_MATRIX_RAINBOW_BEACON // Full tighter gradient spinning around center of keyboard -#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS // Full dual gradients spinning two halfs of keyboard - #define DISABLE_RGB_MATRIX_RAINDROPS // Randomly changes a single key's hue - #define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS // Randomly changes a single key's hue and saturation +// #undef ENABLE_RGB_MATRIX_SOLID_COLOR // Static single hue, no speed support +// #undef ENABLE_RGB_MATRIX_ALPHAS_MODS // Static dual hue, speed is hue for secondary hue +#undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN // Static gradient top to bottom, speed controls how much gradient changes +#undef ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT // Static gradient top to bottom, speed controls how much gradient changes +#undef ENABLE_RGB_MATRIX_BREATHING // Single hue brightness cycling animation +#undef ENABLE_RGB_MATRIX_BAND_SAT // Single hue band fading saturation scrolling left to right +#undef ENABLE_RGB_MATRIX_BAND_VAL // Single hue band fading brightness scrolling left to right +#undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT // Single hue 3 blade spinning pinwheel fades saturation +#undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL // Single hue 3 blade spinning pinwheel fades brightness +#undef ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT // Single hue spinning spiral fades saturation +#undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL // Single hue spinning spiral fades brightness +#undef ENABLE_RGB_MATRIX_CYCLE_ALL // Full keyboard solid hue cycling through full gradient +//#undef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT // Full gradient scrolling left to right +#undef ENABLE_RGB_MATRIX_CYCLE_UP_DOWN // Full gradient scrolling top to bottom +#undef ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON // Full gradent Chevron shapped scrolling left to right +#undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN // Full gradient scrolling out to in +#undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL // Full dual gradients scrolling out to in +#undef ENABLE_RGB_MATRIX_CYCLE_PINWHEEL // Full gradient spinning pinwheel around center of keyboard +#undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL // Full gradient spinning spiral around center of keyboard +#undef ENABLE_RGB_MATRIX_DUAL_BEACON // Full gradient spinning around center of keyboard +#undef ENABLE_RGB_MATRIX_RAINBOW_BEACON // Full tighter gradient spinning around center of keyboard +#undef ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS // Full dual gradients spinning two halfs of keyboard +#undef ENABLE_RGB_MATRIX_RAINDROPS // Randomly changes a single key's hue +#undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS // Randomly changes a single key's hue and saturation // =================================================== Requires RGB_MATRIX_FRAMEBUFFER_EFFECTS ============================================================= -// #define DISABLE_RGB_MATRIX_TYPING_HEATMAP // How hot is your WPM! -#define DISABLE_RGB_MATRIX_DIGITAL_RAIN // That famous computer simulation -// =================================================== RGB_MATRIX_KEYPRESSES OR RGB_MATRIX_KEYRELEASES ===================================================== - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE // Pulses keys hit to hue & value then fades value out -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE // Static single hue, pulses keys hit to shifted hue then fades to current hue -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE // Hue & value pulse near a single key hit then fades value out -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE // Hue & value pulse near multiple key hits then fades value out -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS // Hue & value pulse the same column and row of a single key hit then fades value out -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS // Hue & value pulse the same column and row of multiple key hits then fades value out -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS // Hue & value pulse away on the same column and row of a single key hit then fades value out -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS // Hue & value pulse away on the same column and row of multiple key hits then fades value out -#define DISABLE_RGB_MATRIX_SPLASH // Full gradient & value pulse away from a single key hit then fades value out -#define DISABLE_RGB_MATRIX_MULTISPLASH // Full gradient & value pulse away from multiple key hits then fades value out -#define DISABLE_RGB_MATRIX_SOLID_SPLASH // Hue & value pulse away from a single key hit then fades value out -#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH // Hue & value pulse away from multiple key hits then fades value out +// #undef ENABLE_RGB_MATRIX_TYPING_HEATMAP // How hot is your WPM! +#undef ENABLE_RGB_MATRIX_DIGITAL_RAIN // That famous computer simulation + // =================================================== RGB_MATRIX_KEYPRESSES OR RGB_MATRIX_KEYRELEASES ===================================================== +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE // Pulses keys hit to hue & value then fades value out +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE // Static single hue, pulses keys hit to shifted hue then fades to current hue +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE // Hue & value pulse near a single key hit then fades value out +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE // Hue & value pulse near multiple key hits then fades value out +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS // Hue & value pulse the same column and row of a single key hit then fades value out +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS // Hue & value pulse the same column and row of multiple key hits then fades value out +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS // Hue & value pulse away on the same column and row of a single key hit then fades value out +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS // Hue & value pulse away on the same column and row of multiple key hits then fades value out +#undef ENABLE_RGB_MATRIX_SPLASH // Full gradient & value pulse away from a single key hit then fades value out +#undef ENABLE_RGB_MATRIX_MULTISPLASH // Full gradient & value pulse away from multiple key hits then fades value out +#undef ENABLE_RGB_MATRIX_SOLID_SPLASH // Hue & value pulse away from a single key hit then fades value out +#undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH // Hue & value pulse away from multiple key hits then fades value out diff --git a/keyboards/kprepublic/bm80/config.h b/keyboards/kprepublic/bm80/config.h index 584fdec989..b1a2ad23a1 100644 --- a/keyboards/kprepublic/bm80/config.h +++ b/keyboards/kprepublic/bm80/config.h @@ -74,9 +74,52 @@ along with this program. If not, see . #define RGB_MATRIX_STARTUP_SPD 127 // Sets the default animation speed, if none has been set // #define RGB_MATRIX_DISABLE_KEYCODES // disables control of rgb matrix by keycodes (must use code functions to control the feature) - - -// # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_FRACTAL +#define ENABLE_RGB_MATRIX_PIXEL_RAIN + +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN + +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + +// # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended // does not work for some reason, might revisit diff --git a/keyboards/latin17rgb/config.h b/keyboards/latin17rgb/config.h index 1f52f9a651..6b929f249d 100644 --- a/keyboards/latin17rgb/config.h +++ b/keyboards/latin17rgb/config.h @@ -57,36 +57,69 @@ # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended # define RGB_MATRIX_KEYPRESSES # define RGB_MATRIX_FRAMEBUFFER_EFFECTS -# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -# define DISABLE_RGB_MATRIX_BAND_SAT -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -# define DISABLE_RGB_MATRIX_SPLASH -# define DISABLE_RGB_MATRIX_MULTISPLASH -# define DISABLE_RGB_MATRIX_SOLID_SPLASH -# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH -# define DISABLE_RGB_MATRIX_DIGITAL_RAIN + // RGB Matrix Animation modes. Explicitly enabled + // For full list of effects, see: + // https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +// # define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +// # define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +// # define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +// # define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL + // enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +// # define ENABLE_RGB_MATRIX_DIGITAL_RAIN + // enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// # define ENABLE_RGB_MATRIX_SPLASH +// # define ENABLE_RGB_MATRIX_MULTISPLASH +// # define ENABLE_RGB_MATRIX_SOLID_SPLASH +// # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH -// This is a 7-bit address, that gets left-shifted and bit 0 -// set to 0 for write, 1 for read (as per I2C protocol) -// The address will vary depending on your wiring: -// 0b1110100 AD <-> GND -// 0b1110111 AD <-> VCC -// 0b1110101 AD <-> SCL -// 0b1110110 AD <-> SDA -#define DRIVER_ADDR_1 0b1110100 -#define DRIVER_ADDR_2 0b1110110 + // This is a 7-bit address, that gets left-shifted and bit 0 + // set to 0 for write, 1 for read (as per I2C protocol) + // The address will vary depending on your wiring: + // 0b1110100 AD <-> GND + // 0b1110111 AD <-> VCC + // 0b1110101 AD <-> SCL + // 0b1110110 AD <-> SDA +# define DRIVER_ADDR_1 0b1110100 +# define DRIVER_ADDR_2 0b1110110 -#define DRIVER_COUNT 2 -#define DRIVER_1_LED_TOTAL 25 -#define DRIVER_2_LED_TOTAL 24 -#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) +# define DRIVER_COUNT 2 +# define DRIVER_1_LED_TOTAL 25 +# define DRIVER_2_LED_TOTAL 24 +# define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) #endif #define RGB_DI_PIN B7 diff --git a/keyboards/latin60rgb/config.h b/keyboards/latin60rgb/config.h index 5a4b639ab2..cc7b83b9b8 100644 --- a/keyboards/latin60rgb/config.h +++ b/keyboards/latin60rgb/config.h @@ -56,21 +56,54 @@ # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended # define RGB_MATRIX_KEYPRESSES # define RGB_MATRIX_FRAMEBUFFER_EFFECTS -# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -# define DISABLE_RGB_MATRIX_BAND_SAT -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -# define DISABLE_RGB_MATRIX_SPLASH -# define DISABLE_RGB_MATRIX_MULTISPLASH -# define DISABLE_RGB_MATRIX_SOLID_SPLASH -# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH -# define DISABLE_RGB_MATRIX_DIGITAL_RAIN + // RGB Matrix Animation modes. Explicitly enabled + // For full list of effects, see: + // https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +// # define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +// # define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +// # define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +// # define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL + // enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +// # define ENABLE_RGB_MATRIX_DIGITAL_RAIN + // enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// # define ENABLE_RGB_MATRIX_SPLASH +// # define ENABLE_RGB_MATRIX_MULTISPLASH +// # define ENABLE_RGB_MATRIX_SOLID_SPLASH +// # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH # define DRIVER_ADDR_1 0b1010000 # define DRIVER_COUNT 1 # define DRIVER_LED_TOTAL 60 diff --git a/keyboards/latin6rgb/config.h b/keyboards/latin6rgb/config.h index b356ded816..718d8aa26f 100644 --- a/keyboards/latin6rgb/config.h +++ b/keyboards/latin6rgb/config.h @@ -58,21 +58,54 @@ # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended # define RGB_MATRIX_KEYPRESSES # define RGB_MATRIX_FRAMEBUFFER_EFFECTS -# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -# define DISABLE_RGB_MATRIX_BAND_SAT -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -# define DISABLE_RGB_MATRIX_SPLASH -# define DISABLE_RGB_MATRIX_MULTISPLASH -# define DISABLE_RGB_MATRIX_SOLID_SPLASH -# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH -# define DISABLE_RGB_MATRIX_DIGITAL_RAIN + // RGB Matrix Animation modes. Explicitly enabled + // For full list of effects, see: + // https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +// # define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +// # define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +// # define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +// # define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL + // enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +// # define ENABLE_RGB_MATRIX_DIGITAL_RAIN + // enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// # define ENABLE_RGB_MATRIX_SPLASH +// # define ENABLE_RGB_MATRIX_MULTISPLASH +// # define ENABLE_RGB_MATRIX_SOLID_SPLASH +// # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH // This is a 7-bit address, that gets left-shifted and bit 0 // set to 0 for write, 1 for read (as per I2C protocol) diff --git a/keyboards/latinpad/config.h b/keyboards/latinpad/config.h index 6c887ab07c..5cff076d9d 100644 --- a/keyboards/latinpad/config.h +++ b/keyboards/latinpad/config.h @@ -37,6 +37,54 @@ along with this program. If not, see .*/ #define RGBLED_NUM 18 #define DRIVER_LED_TOTAL RGBLED_NUM +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_PIXEL_RAIN +#define ENABLE_RGB_MATRIX_PIXEL_FLOW +#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 diff --git a/keyboards/latinpadble/config.h b/keyboards/latinpadble/config.h index 5381bf91cc..da89046176 100644 --- a/keyboards/latinpadble/config.h +++ b/keyboards/latinpadble/config.h @@ -54,44 +54,42 @@ along with this program. If not, see .*/ #define RGBLIGHT_LIMIT_VAL 255 #define RGBLIGHT_EFFECT_KNIGHT_OFFSET 20 //#define RGBLIGHT_ANIMATIONS // Run RGB animations -#define DISABLE_RGB_MATRIX_ALPHAS_MODS -#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -#define DISABLE_RGB_MATRIX_BREATHING -#define DISABLE_RGB_MATRIX_BAND_SAT -#define DISABLE_RGB_MATRIX_BAND_VAL -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL -#define DISABLE_RGB_MATRIX_CYCLE_ALL -#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN -#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN -#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -#define DISABLE_RGB_MATRIX_DUAL_BEACON -#define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL -#define DISABLE_RGB_MATRIX_CYCLE_SPIRAL -#define DISABLE_RGB_MATRIX_RAINBOW_BEACON -#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS -#define DISABLE_RGB_MATRIX_RAINDROPS -#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS -#define DISABLE_RGB_MATRIX_TYPING_HEATMAP -#define DISABLE_RGB_MATRIX_DIGITAL_RAIN -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -#define DISABLE_RGB_MATRIX_SPLASH -#define DISABLE_RGB_MATRIX_MULTISPLASH -#define DISABLE_RGB_MATRIX_SOLID_SPLASH -#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH - - +#undef ENABLE_RGB_MATRIX_ALPHAS_MODS +#undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#undef ENABLE_RGB_MATRIX_BREATHING +#undef ENABLE_RGB_MATRIX_BAND_SAT +#undef ENABLE_RGB_MATRIX_BAND_VAL +#undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#undef ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#undef ENABLE_RGB_MATRIX_CYCLE_ALL +#undef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#undef ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#undef ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#undef ENABLE_RGB_MATRIX_DUAL_BEACON +#undef ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#undef ENABLE_RGB_MATRIX_RAINBOW_BEACON +#undef ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#undef ENABLE_RGB_MATRIX_RAINDROPS +#undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#undef ENABLE_RGB_MATRIX_TYPING_HEATMAP +#undef ENABLE_RGB_MATRIX_DIGITAL_RAIN +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#undef ENABLE_RGB_MATRIX_SPLASH +#undef ENABLE_RGB_MATRIX_MULTISPLASH +#undef ENABLE_RGB_MATRIX_SOLID_SPLASH +#undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #define OLED_FONT_H "./lib/glcdfont.c" diff --git a/keyboards/le_chiffre/config.h b/keyboards/le_chiffre/config.h index af4d1e49cf..b2e4c673a4 100644 --- a/keyboards/le_chiffre/config.h +++ b/keyboards/le_chiffre/config.h @@ -76,4 +76,53 @@ #define RGB_MATRIX_SAT_STEP 8 #define RGB_MATRIX_VAL_STEP 8 #define RGB_MATRIX_SPD_STEP 10 + +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #endif diff --git a/keyboards/marksard/rhymestone/rev1/config.h b/keyboards/marksard/rhymestone/rev1/config.h index 9833925110..4448e51268 100644 --- a/keyboards/marksard/rhymestone/rev1/config.h +++ b/keyboards/marksard/rhymestone/rev1/config.h @@ -102,50 +102,50 @@ along with this program. If not, see . #define RGB_MATRIX_VAL_STEP 8 #define RGB_MATRIX_SPD_STEP 10 -// #define DISABLE_RGB_MATRIX_ALPHAS_MODS -// #define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -// #define DISABLE_RGB_MATRIX_BREATHING -// #define DISABLE_RGB_MATRIX_BAND_SAT -// #define DISABLE_RGB_MATRIX_BAND_VAL -// #define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -// #define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -// #define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -// #define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL -// #define DISABLE_RGB_MATRIX_CYCLE_ALL -// #define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -// #define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN -// #define DISABLE_RGB_MATRIX_CYCLE_OUT_IN -// #define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -// #define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -// #define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL -// #define DISABLE_RGB_MATRIX_CYCLE_SPIRAL -// #define DISABLE_RGB_MATRIX_DUAL_BEACON -// #define DISABLE_RGB_MATRIX_RAINBOW_BEACON -// #define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS -// #define DISABLE_RGB_MATRIX_RAINDROPS -// #define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS - - #define RGB_MATRIX_FRAMEBUFFER_EFFECTS -// #define DISABLE_RGB_MATRIX_TYPING_HEATMAP -// #define DISABLE_RGB_MATRIX_DIGITAL_RAIN +// #undef ENABLE_RGB_MATRIX_ALPHAS_MODS +// #undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +// #undef ENABLE_RGB_MATRIX_BREATHING +// #undef ENABLE_RGB_MATRIX_BAND_SAT +// #undef ENABLE_RGB_MATRIX_BAND_VAL +// #undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +// #undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +// #undef ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +// #undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +// #undef ENABLE_RGB_MATRIX_CYCLE_ALL +// #undef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +// #undef ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +// #undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN +// #undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +// #undef ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +// #undef ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +// #undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL +// #undef ENABLE_RGB_MATRIX_DUAL_BEACON +// #undef ENABLE_RGB_MATRIX_RAINBOW_BEACON +// #undef ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +// #undef ENABLE_RGB_MATRIX_RAINDROPS +// #undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS + +# define RGB_MATRIX_FRAMEBUFFER_EFFECTS +// #undef ENABLE_RGB_MATRIX_TYPING_HEATMAP +// #undef ENABLE_RGB_MATRIX_DIGITAL_RAIN // #define RGB_MATRIX_KEYPRESSES // reacts to keypresses -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS - -// #define DISABLE_RGB_MATRIX_SPLASH -// #define DISABLE_RGB_MATRIX_MULTISPLASH -// #define DISABLE_RGB_MATRIX_SOLID_SPLASH -// #define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH - - #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_TYPING_HEATMAP +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS + +// #undef ENABLE_RGB_MATRIX_SPLASH +// #undef ENABLE_RGB_MATRIX_MULTISPLASH +// #undef ENABLE_RGB_MATRIX_SOLID_SPLASH +// #undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + +# define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_TYPING_HEATMAP #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ diff --git a/keyboards/massdrop/alt/config.h b/keyboards/massdrop/alt/config.h index 1a0a7c9768..df3cd891b6 100644 --- a/keyboards/massdrop/alt/config.h +++ b/keyboards/massdrop/alt/config.h @@ -134,5 +134,53 @@ along with this program. If not, see . #define RGB_MATRIX_KEYPRESSES #define RGB_MATRIX_LED_PROCESS_LIMIT 15 #define RGB_MATRIX_LED_FLUSH_LIMIT 10 +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #include "config_led.h" diff --git a/keyboards/massdrop/alt/keymaps/pregame/config.h b/keyboards/massdrop/alt/keymaps/pregame/config.h index 32dee56d30..19fc4fed34 100644 --- a/keyboards/massdrop/alt/keymaps/pregame/config.h +++ b/keyboards/massdrop/alt/keymaps/pregame/config.h @@ -115,42 +115,42 @@ // #define RGBLIGHT_EFFECT_SNAKE_LENGTH 4 // The number of LEDs to light up for the "Snake" animation // This list in in the correct mode order. Next mode is the following line, previous mode is previous line. Loops around. -// #define DISABLE_RGB_MATRIX_SOLID_COLOR // Static single hue, no speed support -// #define DISABLE_RGB_MATRIX_ALPHAS_MODS // Static dual hue, speed is hue for secondary hue -// #define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN // Static gradient top to bottom, speed controls how much gradient changes -// #define DISABLE_RGB_MATRIX_BREATHING // Single hue brightness cycling animation -// #define DISABLE_RGB_MATRIX_BAND_SAT // Single hue band fading saturation scrolling left to right -// #define DISABLE_RGB_MATRIX_BAND_VAL // Single hue band fading brightness scrolling left to right -// #define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT // Single hue 3 blade spinning pinwheel fades saturation -// #define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL // Single hue 3 blade spinning pinwheel fades brightness -// #define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT // Single hue spinning spiral fades saturation -// #define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL // Single hue spinning spiral fades brightness -// #define DISABLE_RGB_MATRIX_CYCLE_ALL // Full keyboard solid hue cycling through full gradient -// #define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT // Full gradient scrolling left to right -// #define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN // Full gradient scrolling top to bottom -// #define DISABLE_RGB_MATRIX_CYCLE_OUT_IN // Full gradient scrolling out to in -// #define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL // Full dual gradients scrolling out to in -// #define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON // Full gradent Chevron shapped scrolling left to right -// #define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL // Full gradient spinning pinwheel around center of keyboard -// #define DISABLE_RGB_MATRIX_CYCLE_SPIRAL // Full gradient spinning spiral around center of keyboard -// #define DISABLE_RGB_MATRIX_DUAL_BEACON // Full gradient spinning around center of keyboard -// #define DISABLE_RGB_MATRIX_RAINBOW_BEACON // Full tighter gradient spinning around center of keyboard -// #define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS // Full dual gradients spinning two halfs of keyboard -// #define DISABLE_RGB_MATRIX_RAINDROPS // Randomly changes a single key's hue -// #define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS // Randomly changes a single key's hue and saturation +// #undef ENABLE_RGB_MATRIX_SOLID_COLOR // Static single hue, no speed support +// #undef ENABLE_RGB_MATRIX_ALPHAS_MODS // Static dual hue, speed is hue for secondary hue +// #undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN // Static gradient top to bottom, speed controls how much gradient changes +// #undef ENABLE_RGB_MATRIX_BREATHING // Single hue brightness cycling animation +// #undef ENABLE_RGB_MATRIX_BAND_SAT // Single hue band fading saturation scrolling left to right +// #undef ENABLE_RGB_MATRIX_BAND_VAL // Single hue band fading brightness scrolling left to right +// #undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT // Single hue 3 blade spinning pinwheel fades saturation +// #undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL // Single hue 3 blade spinning pinwheel fades brightness +// #undef ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT // Single hue spinning spiral fades saturation +// #undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL // Single hue spinning spiral fades brightness +// #undef ENABLE_RGB_MATRIX_CYCLE_ALL // Full keyboard solid hue cycling through full gradient +// #undef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT // Full gradient scrolling left to right +// #undef ENABLE_RGB_MATRIX_CYCLE_UP_DOWN // Full gradient scrolling top to bottom +// #undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN // Full gradient scrolling out to in +// #undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL // Full dual gradients scrolling out to in +// #undef ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON // Full gradent Chevron shapped scrolling left to right +// #undef ENABLE_RGB_MATRIX_CYCLE_PINWHEEL // Full gradient spinning pinwheel around center of keyboard +// #undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL // Full gradient spinning spiral around center of keyboard +// #undef ENABLE_RGB_MATRIX_DUAL_BEACON // Full gradient spinning around center of keyboard +// #undef ENABLE_RGB_MATRIX_RAINBOW_BEACON // Full tighter gradient spinning around center of keyboard +// #undef ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS // Full dual gradients spinning two halfs of keyboard +// #undef ENABLE_RGB_MATRIX_RAINDROPS // Randomly changes a single key's hue +// #undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS // Randomly changes a single key's hue and saturation // =================================================== Requires RGB_MATRIX_FRAMEBUFFER_EFFECTS ============================================================= -// #define DISABLE_RGB_MATRIX_TYPING_HEATMAP // How hot is your WPM! -#define DISABLE_RGB_MATRIX_DIGITAL_RAIN // That famous computer simulation +// #undef ENABLE_RGB_MATRIX_TYPING_HEATMAP // How hot is your WPM! +#undef ENABLE_RGB_MATRIX_DIGITAL_RAIN // That famous computer simulation // =================================================== RGB_MATRIX_KEYPRESSES OR RGB_MATRIX_KEYRELEASES ===================================================== -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE // Static single hue, pulses keys hit to shifted hue then fades to current hue -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE // Pulses keys hit to hue & value then fades value out -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE // Hue & value pulse near a single key hit then fades value out -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE // Hue & value pulse near multiple key hits then fades value out -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS // Hue & value pulse the same column and row of a single key hit then fades value out -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS // Hue & value pulse the same column and row of multiple key hits then fades value out -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS // Hue & value pulse away on the same column and row of a single key hit then fades value out -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS // Hue & value pulse away on the same column and row of multiple key hits then fades value out -// #define DISABLE_RGB_MATRIX_SPLASH // Full gradient & value pulse away from a single key hit then fades value out -// #define DISABLE_RGB_MATRIX_MULTISPLASH // Full gradient & value pulse away from multiple key hits then fades value out -// #define DISABLE_RGB_MATRIX_SOLID_SPLASH // Hue & value pulse away from a single key hit then fades value out -// #define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH // Hue & value pulse away from multiple key hits then fades value out +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE // Static single hue, pulses keys hit to shifted hue then fades to current hue +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE // Pulses keys hit to hue & value then fades value out +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE // Hue & value pulse near a single key hit then fades value out +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE // Hue & value pulse near multiple key hits then fades value out +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS // Hue & value pulse the same column and row of a single key hit then fades value out +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS // Hue & value pulse the same column and row of multiple key hits then fades value out +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS // Hue & value pulse away on the same column and row of a single key hit then fades value out +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS // Hue & value pulse away on the same column and row of multiple key hits then fades value out +// #undef ENABLE_RGB_MATRIX_SPLASH // Full gradient & value pulse away from a single key hit then fades value out +// #undef ENABLE_RGB_MATRIX_MULTISPLASH // Full gradient & value pulse away from multiple key hits then fades value out +// #undef ENABLE_RGB_MATRIX_SOLID_SPLASH // Hue & value pulse away from a single key hit then fades value out +// #undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH // Hue & value pulse away from multiple key hits then fades value out diff --git a/keyboards/massdrop/ctrl/config.h b/keyboards/massdrop/ctrl/config.h index b1df4452cc..6c0678c5ed 100644 --- a/keyboards/massdrop/ctrl/config.h +++ b/keyboards/massdrop/ctrl/config.h @@ -133,5 +133,53 @@ along with this program. If not, see . #define RGB_MATRIX_KEYPRESSES #define RGB_MATRIX_LED_PROCESS_LIMIT 15 #define RGB_MATRIX_LED_FLUSH_LIMIT 10 +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #include "config_led.h" diff --git a/keyboards/massdrop/ctrl/keymaps/endgame/config.h b/keyboards/massdrop/ctrl/keymaps/endgame/config.h index ad738347ab..4850d7eed2 100644 --- a/keyboards/massdrop/ctrl/keymaps/endgame/config.h +++ b/keyboards/massdrop/ctrl/keymaps/endgame/config.h @@ -75,42 +75,42 @@ // #define RGBLIGHT_EFFECT_SNAKE_LENGTH 4 // The number of LEDs to light up for the "Snake" animation // This list in in the correct mode order. Next mode is the following line, previous mode is previous line. Loops around. -// #define DISABLE_RGB_MATRIX_SOLID_COLOR // Static single hue, no speed support -// #define DISABLE_RGB_MATRIX_ALPHAS_MODS // Static dual hue, speed is hue for secondary hue -// #define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN // Static gradient top to bottom, speed controls how much gradient changes -#define DISABLE_RGB_MATRIX_BREATHING // Single hue brightness cycling animation -#define DISABLE_RGB_MATRIX_BAND_SAT // Single hue band fading saturation scrolling left to right -#define DISABLE_RGB_MATRIX_BAND_VAL // Single hue band fading brightness scrolling left to right -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT // Single hue 3 blade spinning pinwheel fades saturation -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL // Single hue 3 blade spinning pinwheel fades brightness -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT // Single hue spinning spiral fades saturation -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL // Single hue spinning spiral fades brightness -#define DISABLE_RGB_MATRIX_CYCLE_ALL // Full keyboard solid hue cycling through full gradient -#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT // Full gradient scrolling left to right -#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN // Full gradient scrolling top to bottom -#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN // Full gradient scrolling out to in -#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL // Full dual gradients scrolling out to in -#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON // Full gradent Chevron shapped scrolling left to right -#define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL // Full gradient spinning pinwheel around center of keyboard -#define DISABLE_RGB_MATRIX_CYCLE_SPIRAL // Full gradient spinning spiral around center of keyboard -#define DISABLE_RGB_MATRIX_DUAL_BEACON // Full gradient spinning around center of keyboard -#define DISABLE_RGB_MATRIX_RAINBOW_BEACON // Full tighter gradient spinning around center of keyboard -#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS // Full dual gradients spinning two halfs of keyboard -// #define DISABLE_RGB_MATRIX_RAINDROPS // Randomly changes a single key's hue -// #define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS // Randomly changes a single key's hue and saturation +// #undef ENABLE_RGB_MATRIX_SOLID_COLOR // Static single hue, no speed support +// #undef ENABLE_RGB_MATRIX_ALPHAS_MODS // Static dual hue, speed is hue for secondary hue +// #undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN // Static gradient top to bottom, speed controls how much gradient changes +#undef ENABLE_RGB_MATRIX_BREATHING // Single hue brightness cycling animation +#undef ENABLE_RGB_MATRIX_BAND_SAT // Single hue band fading saturation scrolling left to right +#undef ENABLE_RGB_MATRIX_BAND_VAL // Single hue band fading brightness scrolling left to right +#undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT // Single hue 3 blade spinning pinwheel fades saturation +#undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL // Single hue 3 blade spinning pinwheel fades brightness +#undef ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT // Single hue spinning spiral fades saturation +#undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL // Single hue spinning spiral fades brightness +#undef ENABLE_RGB_MATRIX_CYCLE_ALL // Full keyboard solid hue cycling through full gradient +#undef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT // Full gradient scrolling left to right +#undef ENABLE_RGB_MATRIX_CYCLE_UP_DOWN // Full gradient scrolling top to bottom +#undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN // Full gradient scrolling out to in +#undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL // Full dual gradients scrolling out to in +#undef ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON // Full gradent Chevron shapped scrolling left to right +#undef ENABLE_RGB_MATRIX_CYCLE_PINWHEEL // Full gradient spinning pinwheel around center of keyboard +#undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL // Full gradient spinning spiral around center of keyboard +#undef ENABLE_RGB_MATRIX_DUAL_BEACON // Full gradient spinning around center of keyboard +#undef ENABLE_RGB_MATRIX_RAINBOW_BEACON // Full tighter gradient spinning around center of keyboard +#undef ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS // Full dual gradients spinning two halfs of keyboard +// #undef ENABLE_RGB_MATRIX_RAINDROPS // Randomly changes a single key's hue +// #undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS // Randomly changes a single key's hue and saturation // =================================================== Requires RGB_MATRIX_FRAMEBUFFER_EFFECTS ============================================================= -// #define DISABLE_RGB_MATRIX_TYPING_HEATMAP // How hot is your WPM! -#define DISABLE_RGB_MATRIX_DIGITAL_RAIN // That famous computer simulation +// #undef ENABLE_RGB_MATRIX_TYPING_HEATMAP // How hot is your WPM! +#undef ENABLE_RGB_MATRIX_DIGITAL_RAIN // That famous computer simulation // =================================================== RGB_MATRIX_KEYPRESSES OR RGB_MATRIX_KEYRELEASES ===================================================== -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE // Static single hue, pulses keys hit to shifted hue then fades to current hue -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE // Pulses keys hit to hue & value then fades value out -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE // Hue & value pulse near a single key hit then fades value out -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE // Hue & value pulse near multiple key hits then fades value out -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS // Hue & value pulse the same column and row of a single key hit then fades value out -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS // Hue & value pulse the same column and row of multiple key hits then fades value out -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS // Hue & value pulse away on the same column and row of a single key hit then fades value out -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS // Hue & value pulse away on the same column and row of multiple key hits then fades value out -#define DISABLE_RGB_MATRIX_SPLASH // Full gradient & value pulse away from a single key hit then fades value out -#define DISABLE_RGB_MATRIX_MULTISPLASH // Full gradient & value pulse away from multiple key hits then fades value out -#define DISABLE_RGB_MATRIX_SOLID_SPLASH // Hue & value pulse away from a single key hit then fades value out -#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH // Hue & value pulse away from multiple key hits then fades value out +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE // Static single hue, pulses keys hit to shifted hue then fades to current hue +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE // Pulses keys hit to hue & value then fades value out +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE // Hue & value pulse near a single key hit then fades value out +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE // Hue & value pulse near multiple key hits then fades value out +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS // Hue & value pulse the same column and row of a single key hit then fades value out +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS // Hue & value pulse the same column and row of multiple key hits then fades value out +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS // Hue & value pulse away on the same column and row of a single key hit then fades value out +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS // Hue & value pulse away on the same column and row of multiple key hits then fades value out +#undef ENABLE_RGB_MATRIX_SPLASH // Full gradient & value pulse away from a single key hit then fades value out +#undef ENABLE_RGB_MATRIX_MULTISPLASH // Full gradient & value pulse away from multiple key hits then fades value out +#undef ENABLE_RGB_MATRIX_SOLID_SPLASH // Hue & value pulse away from a single key hit then fades value out +#undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH // Hue & value pulse away from multiple key hits then fades value out diff --git a/keyboards/massdrop/ctrl/keymaps/matthewrobo/config.h b/keyboards/massdrop/ctrl/keymaps/matthewrobo/config.h index 89c129c58e..81e7764a9e 100644 --- a/keyboards/massdrop/ctrl/keymaps/matthewrobo/config.h +++ b/keyboards/massdrop/ctrl/keymaps/matthewrobo/config.h @@ -93,42 +93,42 @@ along with this program. If not, see . // #define RGBLIGHT_EFFECT_SNAKE_LENGTH 4 // The number of LEDs to light up for the "Snake" animation // This list in in the correct mode order. Next mode is the following line, previous mode is previous line. Loops around. -// #define DISABLE_RGB_MATRIX_SOLID_COLOR // Static single hue, no speed support -// #define DISABLE_RGB_MATRIX_ALPHAS_MODS // Static dual hue, speed is hue for secondary hue -// #define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN // Static gradient top to bottom, speed controls how much gradient changes -#define DISABLE_RGB_MATRIX_BREATHING // Single hue brightness cycling animation -#define DISABLE_RGB_MATRIX_BAND_SAT // Single hue band fading saturation scrolling left to right -#define DISABLE_RGB_MATRIX_BAND_VAL // Single hue band fading brightness scrolling left to right -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT // Single hue 3 blade spinning pinwheel fades saturation -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL // Single hue 3 blade spinning pinwheel fades brightness -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT // Single hue spinning spiral fades saturation -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL // Single hue spinning spiral fades brightness -#define DISABLE_RGB_MATRIX_CYCLE_ALL // Full keyboard solid hue cycling through full gradient -#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT // Full gradient scrolling left to right -#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN // Full gradient scrolling top to bottom -#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN // Full gradient scrolling out to in -#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL // Full dual gradients scrolling out to in -#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON // Full gradent Chevron shapped scrolling left to right -#define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL // Full gradient spinning pinwheel around center of keyboard -// #define DISABLE_RGB_MATRIX_CYCLE_SPIRAL // Full gradient spinning spiral around center of keyboard -#define DISABLE_RGB_MATRIX_DUAL_BEACON // Full gradient spinning around center of keyboard -#define DISABLE_RGB_MATRIX_RAINBOW_BEACON // Full tighter gradient spinning around center of keyboard -#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS // Full dual gradients spinning two halfs of keyboard -#define DISABLE_RGB_MATRIX_RAINDROPS // Randomly changes a single key's hue -#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS // Randomly changes a single key's hue and saturation +// #undef ENABLE_RGB_MATRIX_SOLID_COLOR // Static single hue, no speed support +// #undef ENABLE_RGB_MATRIX_ALPHAS_MODS // Static dual hue, speed is hue for secondary hue +// #undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN // Static gradient top to bottom, speed controls how much gradient changes +#undef ENABLE_RGB_MATRIX_BREATHING // Single hue brightness cycling animation +#undef ENABLE_RGB_MATRIX_BAND_SAT // Single hue band fading saturation scrolling left to right +#undef ENABLE_RGB_MATRIX_BAND_VAL // Single hue band fading brightness scrolling left to right +#undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT // Single hue 3 blade spinning pinwheel fades saturation +#undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL // Single hue 3 blade spinning pinwheel fades brightness +#undef ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT // Single hue spinning spiral fades saturation +#undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL // Single hue spinning spiral fades brightness +#undef ENABLE_RGB_MATRIX_CYCLE_ALL // Full keyboard solid hue cycling through full gradient +#undef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT // Full gradient scrolling left to right +#undef ENABLE_RGB_MATRIX_CYCLE_UP_DOWN // Full gradient scrolling top to bottom +#undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN // Full gradient scrolling out to in +#undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL // Full dual gradients scrolling out to in +#undef ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON // Full gradent Chevron shapped scrolling left to right +#undef ENABLE_RGB_MATRIX_CYCLE_PINWHEEL // Full gradient spinning pinwheel around center of keyboard +// #undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL // Full gradient spinning spiral around center of keyboard +#undef ENABLE_RGB_MATRIX_DUAL_BEACON // Full gradient spinning around center of keyboard +#undef ENABLE_RGB_MATRIX_RAINBOW_BEACON // Full tighter gradient spinning around center of keyboard +#undef ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS // Full dual gradients spinning two halfs of keyboard +#undef ENABLE_RGB_MATRIX_RAINDROPS // Randomly changes a single key's hue +#undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS // Randomly changes a single key's hue and saturation // =================================================== Requires RGB_MATRIX_FRAMEBUFFER_EFFECTS ============================================================= -// #define DISABLE_RGB_MATRIX_TYPING_HEATMAP // How hot is your WPM! -#define DISABLE_RGB_MATRIX_DIGITAL_RAIN // That famous computer simulation +// #undef ENABLE_RGB_MATRIX_TYPING_HEATMAP // How hot is your WPM! +#undef ENABLE_RGB_MATRIX_DIGITAL_RAIN // That famous computer simulation // =================================================== RGB_MATRIX_KEYPRESSES OR RGB_MATRIX_KEYRELEASES ===================================================== -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE // Static single hue, pulses keys hit to shifted hue then fades to current hue -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE // Pulses keys hit to hue & value then fades value out -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE // Hue & value pulse near a single key hit then fades value out -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE // Hue & value pulse near multiple key hits then fades value out -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS // Hue & value pulse the same column and row of a single key hit then fades value out -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS // Hue & value pulse the same column and row of multiple key hits then fades value out -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS // Hue & value pulse away on the same column and row of a single key hit then fades value out -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS // Hue & value pulse away on the same column and row of multiple key hits then fades value out -// #define DISABLE_RGB_MATRIX_SPLASH // Full gradient & value pulse away from a single key hit then fades value out -// #define DISABLE_RGB_MATRIX_MULTISPLASH // Full gradient & value pulse away from multiple key hits then fades value out -// #define DISABLE_RGB_MATRIX_SOLID_SPLASH // Hue & value pulse away from a single key hit then fades value out -// #define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH // Hue & value pulse away from multiple key hits then fades value out +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE // Static single hue, pulses keys hit to shifted hue then fades to current hue +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE // Pulses keys hit to hue & value then fades value out +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE // Hue & value pulse near a single key hit then fades value out +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE // Hue & value pulse near multiple key hits then fades value out +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS // Hue & value pulse the same column and row of a single key hit then fades value out +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS // Hue & value pulse the same column and row of multiple key hits then fades value out +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS // Hue & value pulse away on the same column and row of a single key hit then fades value out +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS // Hue & value pulse away on the same column and row of multiple key hits then fades value out +// #undef ENABLE_RGB_MATRIX_SPLASH // Full gradient & value pulse away from a single key hit then fades value out +// #undef ENABLE_RGB_MATRIX_MULTISPLASH // Full gradient & value pulse away from multiple key hits then fades value out +// #undef ENABLE_RGB_MATRIX_SOLID_SPLASH // Hue & value pulse away from a single key hit then fades value out +// #undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH // Hue & value pulse away from multiple key hits then fades value out diff --git a/keyboards/matrix/noah/config.h b/keyboards/matrix/noah/config.h index e5fa4959c8..84877f6a5c 100644 --- a/keyboards/matrix/noah/config.h +++ b/keyboards/matrix/noah/config.h @@ -39,6 +39,54 @@ #define DRIVER_1_LED_TOTAL 36 #define DRIVER_2_LED_TOTAL 36 #define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH /* indicator rgb */ #define RGBLED_NUM 7 diff --git a/keyboards/mechlovin/adelais/rgb_led/rev1/config.h b/keyboards/mechlovin/adelais/rgb_led/rev1/config.h index 97092e25e0..c0cae1600b 100644 --- a/keyboards/mechlovin/adelais/rgb_led/rev1/config.h +++ b/keyboards/mechlovin/adelais/rgb_led/rev1/config.h @@ -18,7 +18,55 @@ #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 220 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #define LED_NUM_LOCK_PIN C15 #define LED_CAPS_LOCK_PIN B2 -#define LED_SCROLL_LOCK_PIN B9 \ No newline at end of file +#define LED_SCROLL_LOCK_PIN B9 diff --git a/keyboards/mechlovin/adelais/rgb_led/rev2/config.h b/keyboards/mechlovin/adelais/rgb_led/rev2/config.h index 9c71c537b7..cd290cdcd1 100644 --- a/keyboards/mechlovin/adelais/rgb_led/rev2/config.h +++ b/keyboards/mechlovin/adelais/rgb_led/rev2/config.h @@ -35,6 +35,54 @@ #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #define RGB_MATRIX_DISABLE_KEYCODES diff --git a/keyboards/mechlovin/adelais/rgb_led/rev3/config.h b/keyboards/mechlovin/adelais/rgb_led/rev3/config.h index 5b3a8e8250..b0f082cc88 100644 --- a/keyboards/mechlovin/adelais/rgb_led/rev3/config.h +++ b/keyboards/mechlovin/adelais/rgb_led/rev3/config.h @@ -61,6 +61,51 @@ along with this program. If not, see . #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_FRACTAL +#define ENABLE_RGB_MATRIX_PIXEL_RAIN + +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN + +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + #define RGB_MATRIX_DISABLE_KEYCODES #define ENCODERS_PAD_A { B12 } @@ -72,4 +117,4 @@ along with this program. If not, see . #define LED_NUM_LOCK_PIN A0 #define LED_CAPS_LOCK_PIN C14 -#define LED_SCROLL_LOCK_PIN C15 \ No newline at end of file +#define LED_SCROLL_LOCK_PIN C15 diff --git a/keyboards/mechlovin/delphine/rgb_led/config.h b/keyboards/mechlovin/delphine/rgb_led/config.h index edb476ecb7..0ed8721d23 100644 --- a/keyboards/mechlovin/delphine/rgb_led/config.h +++ b/keyboards/mechlovin/delphine/rgb_led/config.h @@ -42,3 +42,51 @@ #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH diff --git a/keyboards/mechlovin/hannah60rgb/rev1/config.h b/keyboards/mechlovin/hannah60rgb/rev1/config.h index fd45ecca6c..0f0c923fd0 100644 --- a/keyboards/mechlovin/hannah60rgb/rev1/config.h +++ b/keyboards/mechlovin/hannah60rgb/rev1/config.h @@ -15,4 +15,52 @@ # define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 # define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #endif diff --git a/keyboards/mechlovin/hannah60rgb/rev2/config.h b/keyboards/mechlovin/hannah60rgb/rev2/config.h index 5e57f985d3..e96ca0002a 100644 --- a/keyboards/mechlovin/hannah60rgb/rev2/config.h +++ b/keyboards/mechlovin/hannah60rgb/rev2/config.h @@ -34,6 +34,54 @@ #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // Sets the default mode, if none has been set +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #if defined(RGBLIGHT_ENABLE) && defined(RGB_MATRIX_ENABLE) # define RGB_MATRIX_DISABLE_KEYCODES diff --git a/keyboards/mechlovin/infinity87/rgb_rev1/config.h b/keyboards/mechlovin/infinity87/rgb_rev1/config.h index 8cef83f897..5b1a68308b 100644 --- a/keyboards/mechlovin/infinity87/rgb_rev1/config.h +++ b/keyboards/mechlovin/infinity87/rgb_rev1/config.h @@ -37,9 +37,57 @@ #define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended #define RGB_MATRIX_KEYPRESSES -#define DISABLE_RGB_MATRIX_SPLASH -#define DISABLE_RGB_MATRIX_MULTISPLASH -#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +#undef ENABLE_RGB_MATRIX_SPLASH +#undef ENABLE_RGB_MATRIX_MULTISPLASH +#undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH //#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL //#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_REACTIVE_SIMPLE diff --git a/keyboards/melgeek/mach80/config.h b/keyboards/melgeek/mach80/config.h index 99fced6758..f598751418 100755 --- a/keyboards/melgeek/mach80/config.h +++ b/keyboards/melgeek/mach80/config.h @@ -49,3 +49,47 @@ #define DRIVER_ADDR_1 0b0110000 #define DRIVER_COUNT 1 +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_FRACTAL +#define ENABLE_RGB_MATRIX_PIXEL_RAIN + +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN + +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH diff --git a/keyboards/melgeek/mj61/config.h b/keyboards/melgeek/mj61/config.h index 313c4473bc..e3097b9cf7 100644 --- a/keyboards/melgeek/mj61/config.h +++ b/keyboards/melgeek/mj61/config.h @@ -41,9 +41,54 @@ #define RGB_MATRIX_KEYPRESSES #define RGB_MATRIX_LED_PROCESS_LIMIT 4 #define RGB_MATRIX_LED_FLUSH_LIMIT 26 -#define DISABLE_RGB_MATRIX_SPLASH -#define DISABLE_RGB_MATRIX_MULTISPLASH -#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// # define ENABLE_RGB_MATRIX_SPLASH +// # define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +// # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH //#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL #define DRIVER_ADDR_1 0b0110000 diff --git a/keyboards/melgeek/mj63/config.h b/keyboards/melgeek/mj63/config.h index 0292fa6461..db80371a2b 100644 --- a/keyboards/melgeek/mj63/config.h +++ b/keyboards/melgeek/mj63/config.h @@ -41,9 +41,54 @@ #define RGB_MATRIX_KEYPRESSES #define RGB_MATRIX_LED_PROCESS_LIMIT 4 #define RGB_MATRIX_LED_FLUSH_LIMIT 26 -#define DISABLE_RGB_MATRIX_SPLASH -#define DISABLE_RGB_MATRIX_MULTISPLASH -#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// # define ENABLE_RGB_MATRIX_SPLASH +// # define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +// # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH //#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL #define DRIVER_ADDR_1 0b0110000 diff --git a/keyboards/melgeek/mj64/config.h b/keyboards/melgeek/mj64/config.h index c3741bc062..a249be3fea 100644 --- a/keyboards/melgeek/mj64/config.h +++ b/keyboards/melgeek/mj64/config.h @@ -41,9 +41,54 @@ #define RGB_MATRIX_KEYPRESSES #define RGB_MATRIX_LED_PROCESS_LIMIT 4 #define RGB_MATRIX_LED_FLUSH_LIMIT 26 -#define DISABLE_RGB_MATRIX_SPLASH -#define DISABLE_RGB_MATRIX_MULTISPLASH -#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// # define ENABLE_RGB_MATRIX_SPLASH +// # define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +// # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH //#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL #define DRIVER_ADDR_1 0b0110000 diff --git a/keyboards/melgeek/mj65/config.h b/keyboards/melgeek/mj65/config.h index bf8ca7c2c3..70a12d9255 100644 --- a/keyboards/melgeek/mj65/config.h +++ b/keyboards/melgeek/mj65/config.h @@ -41,9 +41,54 @@ #define RGB_MATRIX_KEYPRESSES #define RGB_MATRIX_LED_PROCESS_LIMIT 4 #define RGB_MATRIX_LED_FLUSH_LIMIT 26 -#define DISABLE_RGB_MATRIX_SPLASH -#define DISABLE_RGB_MATRIX_MULTISPLASH -#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// # define ENABLE_RGB_MATRIX_SPLASH +// # define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +// # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH //#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL #define DRIVER_ADDR_1 0b0110000 diff --git a/keyboards/melgeek/mojo68/config.h b/keyboards/melgeek/mojo68/config.h index 923c15b06a..29f25874de 100755 --- a/keyboards/melgeek/mojo68/config.h +++ b/keyboards/melgeek/mojo68/config.h @@ -41,9 +41,54 @@ #define RGB_MATRIX_KEYPRESSES #define RGB_MATRIX_LED_PROCESS_LIMIT 4 #define RGB_MATRIX_LED_FLUSH_LIMIT 26 -#define DISABLE_RGB_MATRIX_SPLASH -#define DISABLE_RGB_MATRIX_MULTISPLASH -#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// # define ENABLE_RGB_MATRIX_SPLASH +// # define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +// # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH //#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL #define DRIVER_ADDR_1 0b0110000 diff --git a/keyboards/melgeek/mojo75/config.h b/keyboards/melgeek/mojo75/config.h index 34f64e844e..9e2d1080d1 100644 --- a/keyboards/melgeek/mojo75/config.h +++ b/keyboards/melgeek/mojo75/config.h @@ -41,9 +41,54 @@ #define RGB_MATRIX_KEYPRESSES #define RGB_MATRIX_LED_PROCESS_LIMIT 4 #define RGB_MATRIX_LED_FLUSH_LIMIT 26 -#define DISABLE_RGB_MATRIX_SPLASH -#define DISABLE_RGB_MATRIX_MULTISPLASH -#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// # define ENABLE_RGB_MATRIX_SPLASH +// # define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +// # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH //#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL //#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_REACTIVE_SIMPLE diff --git a/keyboards/melgeek/z70ultra/config.h b/keyboards/melgeek/z70ultra/config.h index d01d0222ce..2df25bf501 100644 --- a/keyboards/melgeek/z70ultra/config.h +++ b/keyboards/melgeek/z70ultra/config.h @@ -40,9 +40,54 @@ #define RGB_MATRIX_KEYPRESSES #define RGB_MATRIX_LED_PROCESS_LIMIT 4 #define RGB_MATRIX_LED_FLUSH_LIMIT 26 -#define DISABLE_RGB_MATRIX_SPLASH -#define DISABLE_RGB_MATRIX_MULTISPLASH -#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// # define ENABLE_RGB_MATRIX_SPLASH +// # define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +// # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH //#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL #define DRIVER_ADDR_1 0b0110000 diff --git a/keyboards/miller/gm862/config.h b/keyboards/miller/gm862/config.h index 7c4bfacd43..09429b4d19 100644 --- a/keyboards/miller/gm862/config.h +++ b/keyboards/miller/gm862/config.h @@ -39,21 +39,55 @@ # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended # define RGB_MATRIX_KEYPRESSES # define RGB_MATRIX_FRAMEBUFFER_EFFECTS -# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -# define DISABLE_RGB_MATRIX_BAND_SAT -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -# define DISABLE_RGB_MATRIX_SPLASH -# define DISABLE_RGB_MATRIX_MULTISPLASH -# define DISABLE_RGB_MATRIX_SOLID_SPLASH -# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH -# define DISABLE_RGB_MATRIX_DIGITAL_RAIN +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +// # define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +// # define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +// # define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +// # define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +// # define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// # define ENABLE_RGB_MATRIX_SPLASH +// # define ENABLE_RGB_MATRIX_MULTISPLASH +// # define ENABLE_RGB_MATRIX_SOLID_SPLASH +// # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + # define DRIVER_ADDR_1 0b1010000 # define DRIVER_COUNT 1 # define DRIVER_LED_TOTAL 62 diff --git a/keyboards/monstargear/xo87/rgb/config.h b/keyboards/monstargear/xo87/rgb/config.h index 5ed0ed445d..dabca04514 100644 --- a/keyboards/monstargear/xo87/rgb/config.h +++ b/keyboards/monstargear/xo87/rgb/config.h @@ -43,6 +43,54 @@ #define RGB_MATRIX_KEYPRESSES #define RGB_MATRIX_FRAMEBUFFER_EFFECTS #define RGBLED_NUM 110 +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_PIXEL_RAIN +#define ENABLE_RGB_MATRIX_PIXEL_FLOW +#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #define DEBOUNCE 5 #define LOCKING_SUPPORT_ENABLE diff --git a/keyboards/moonlander/config.h b/keyboards/moonlander/config.h index f2e5088a34..1c6cbb5c63 100644 --- a/keyboards/moonlander/config.h +++ b/keyboards/moonlander/config.h @@ -92,6 +92,54 @@ #define RGB_MATRIX_FRAMEBUFFER_EFFECTS #define RGB_MATRIX_KEYPRESSES #define RGB_DISABLE_WHEN_USB_SUSPENDED +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #define MUSIC_MAP diff --git a/keyboards/mt64rgb/config.h b/keyboards/mt64rgb/config.h index 810285d1e0..ea7659b471 100644 --- a/keyboards/mt64rgb/config.h +++ b/keyboards/mt64rgb/config.h @@ -1,18 +1,18 @@ -/* Copyright 2020 MT - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ +/* Copyright 2020 MT + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ #pragma once #include "config_common.h" @@ -57,24 +57,57 @@ #define DRIVER_COUNT 1 #define DRIVER_LED_TOTAL 64 - - -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -#define DISABLE_RGB_MATRIX_BAND_SAT -#define DISABLE_RGB_MATRIX_BAND_VAL -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL -#define DISABLE_RGB_MATRIX_DIGITAL_RAIN -#define DISABLE_RGB_MATRIX_TYPING_HEATMAP -#define DISABLE_RGB_MATRIX_RAINBOW_BEACON -#define DISABLE_RGB_MATRIX_ALPHAS_MODS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL + + +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +// # define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +// # define ENABLE_RGB_MATRIX_BAND_SAT +// # define ENABLE_RGB_MATRIX_BAND_VAL +// # define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +// # define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +// # define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +// # define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +// # define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +// # define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +// # define ENABLE_RGB_MATRIX_TYPING_HEATMAP +// # define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + #endif diff --git a/keyboards/mt84/config.h b/keyboards/mt84/config.h index 66460a9fda..bde8919ba7 100644 --- a/keyboards/mt84/config.h +++ b/keyboards/mt84/config.h @@ -1,17 +1,17 @@ /* Copyright 2020 MT <704340378@qq.com> - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . */ #pragma once @@ -56,40 +56,70 @@ #define DRIVER_ADDR_1 0b1010000 #define DRIVER_ADDR_2 0b1011111 - + #define DRIVER_COUNT 2 #define DRIVER_1_LED_TOTAL 44 #define DRIVER_2_LED_TOTAL 40 #define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) - - - #define DISABLE_RGB_MATRIX_ALPHAS_MODS - #define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN - #define DISABLE_RGB_MATRIX_BREATHING - #define DISABLE_RGB_MATRIX_BAND_SAT - #define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT - #define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT - #define DISABLE_RGB_MATRIX_RAINDROPS - #define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS - #define DISABLE_RGB_MATRIX_TYPING_HEATMAP - #define DISABLE_RGB_MATRIX_DIGITAL_RAIN - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS - #define DISABLE_RGB_MATRIX_SPLASH - #define DISABLE_RGB_MATRIX_SOLID_SPLASH - #define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH + + // RGB Matrix Animation modes. Explicitly enabled + // For full list of effects, see: + // https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects + // # define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING + // # define ENABLE_RGB_MATRIX_BAND_SAT + // # define ENABLE_RGB_MATRIX_BAND_VAL + // # define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT + // # define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL + // # define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT + // # define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN + // # define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON + // # define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL + // enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined + // # define ENABLE_RGB_MATRIX_TYPING_HEATMAP + // # define ENABLE_RGB_MATRIX_DIGITAL_RAIN + // enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE + // # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE + // # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS + // # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS + // # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + #endif #define RGB_DI_PIN B0 #ifdef RGB_DI_PIN -// define RGBLIGHT_ANIMATIONS -#define RGBLIGHT_EFFECT_STATIC_GRADIENT -#define RGBLIGHT_EFFECT_RAINBOW_SWIRL -#define RGBLIGHT_EFFECT_BREATHING + // define RGBLIGHT_ANIMATIONS +# define RGBLIGHT_EFFECT_STATIC_GRADIENT +# define RGBLIGHT_EFFECT_RAINBOW_SWIRL +# define RGBLIGHT_EFFECT_BREATHING # define RGBLED_NUM 18 # define RGBLIGHT_HUE_STEP 8 # define RGBLIGHT_SAT_STEP 8 @@ -104,4 +134,3 @@ #define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ #define LOCKING_RESYNC_ENABLE - diff --git a/keyboards/mwstudio/mw75/config.h b/keyboards/mwstudio/mw75/config.h index 58fcdf2c7c..2853276653 100644 --- a/keyboards/mwstudio/mw75/config.h +++ b/keyboards/mwstudio/mw75/config.h @@ -52,20 +52,50 @@ #define RGBLED_NUM 97 #define RGB_MATRIX_KEYPRESSES -// #define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -// #define DISABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -// #define DISABLE_RGB_MATRIX_TYPING_HEATMAP -// #define DISABLE_RGB_MATRIX_DIGITAL_RAIN -// #define DISABLE_RGB_MATRIX_BAND_SAT -// #define DISABLE_RGB_MATRIX_BAND_VAL -// #define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -// #define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -// #define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -// #define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_FRACTAL +#define ENABLE_RGB_MATRIX_PIXEL_RAIN + +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN + +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #define RGBLIGHT_HUE_STEP 8 #define RGBLIGHT_SAT_STEP 8 diff --git a/keyboards/nack/config.h b/keyboards/nack/config.h index 26fe7edf2c..82daf71037 100644 --- a/keyboards/nack/config.h +++ b/keyboards/nack/config.h @@ -45,6 +45,55 @@ along with this program. If not, see . #define RGB_MATRIX_HUE_STEP 10 #define RGB_MATRIX_SAT_STEP 10 #define RGB_MATRIX_VAL_STEP 10 +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + #endif #ifdef AUDIO_ENABLE diff --git a/keyboards/opendeck/32/rev1/config.h b/keyboards/opendeck/32/rev1/config.h index 9c7d4ddd9f..73967671d0 100644 --- a/keyboards/opendeck/32/rev1/config.h +++ b/keyboards/opendeck/32/rev1/config.h @@ -40,6 +40,54 @@ #define RGB_DISABLE_WHEN_USB_SUSPENDED #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_SPIRAL #define RGB_MATRIX_DISABLE_KEYCODES +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_PIXEL_RAIN +#define ENABLE_RGB_MATRIX_PIXEL_FLOW +#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH // Set 0 if debouncing isn't needed #define DEBOUNCE 5 diff --git a/keyboards/owlab/voice65/hotswap/config.h b/keyboards/owlab/voice65/hotswap/config.h index 7a389264db..42f97036b3 100644 --- a/keyboards/owlab/voice65/hotswap/config.h +++ b/keyboards/owlab/voice65/hotswap/config.h @@ -79,6 +79,54 @@ along with this program. If not, see . # define DRIVER_ADDR_1 0b0110000 # define DRIVER_COUNT 1 # define DRIVER_LED_TOTAL 67 +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #endif /* Encoder */ diff --git a/keyboards/owlab/voice65/soldered/config.h b/keyboards/owlab/voice65/soldered/config.h index 9e5dc7bb18..f0c68dc25b 100644 --- a/keyboards/owlab/voice65/soldered/config.h +++ b/keyboards/owlab/voice65/soldered/config.h @@ -78,6 +78,55 @@ along with this program. If not, see . # define DRIVER_ADDR_1 0b0110000 # define DRIVER_COUNT 1 # define DRIVER_LED_TOTAL 71 + +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #endif /* Encoder */ diff --git a/keyboards/percent/canoe_gen2/config.h b/keyboards/percent/canoe_gen2/config.h index 6409371d40..2188d9b41c 100644 --- a/keyboards/percent/canoe_gen2/config.h +++ b/keyboards/percent/canoe_gen2/config.h @@ -65,3 +65,51 @@ along with this program. If not, see . #define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS #define RGB_MATRIX_STARTUP_SPD 127 #define RGB_DISABLE_WHEN_USB_SUSPENDED +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_PIXEL_RAIN +#define ENABLE_RGB_MATRIX_PIXEL_FLOW +#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH diff --git a/keyboards/planck/ez/config.h b/keyboards/planck/ez/config.h index 504ab812e1..5085514729 100644 --- a/keyboards/planck/ez/config.h +++ b/keyboards/planck/ez/config.h @@ -130,7 +130,54 @@ #define RGB_MATRIX_LED_PROCESS_LIMIT 5 #define RGB_MATRIX_LED_FLUSH_LIMIT 26 - +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_PIXEL_RAIN +#define ENABLE_RGB_MATRIX_PIXEL_FLOW +#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #define IGNORE_MOD_TAP_INTERRUPT diff --git a/keyboards/planck/keymaps/buffet/config.h b/keyboards/planck/keymaps/buffet/config.h index 478b282b31..a6567d8e56 100644 --- a/keyboards/planck/keymaps/buffet/config.h +++ b/keyboards/planck/keymaps/buffet/config.h @@ -4,43 +4,43 @@ #define PERMISSIVE_HOLD // Disable all RGB effects -#define DISABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT -#define DISABLE_RGB_MATRIX_ALPHAS_MODS -#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -#define DISABLE_RGB_MATRIX_BREATHING -#define DISABLE_RGB_MATRIX_BAND_SAT -#define DISABLE_RGB_MATRIX_BAND_VAL -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL -#define DISABLE_RGB_MATRIX_CYCLE_ALL -#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN -#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN -#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -#define DISABLE_RGB_MATRIX_DUAL_BEACON -#define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL -#define DISABLE_RGB_MATRIX_CYCLE_SPIRAL -#define DISABLE_RGB_MATRIX_RAINBOW_BEACON -#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS -#define DISABLE_RGB_MATRIX_RAINDROPS -#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS -#define DISABLE_RGB_MATRIX_TYPING_HEATMAP -#define DISABLE_RGB_MATRIX_DIGITAL_RAIN -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -#define DISABLE_RGB_MATRIX_SPLASH -#define DISABLE_RGB_MATRIX_MULTISPLASH -#define DISABLE_RGB_MATRIX_SOLID_SPLASH -#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +#undef ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#undef ENABLE_RGB_MATRIX_ALPHAS_MODS +#undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#undef ENABLE_RGB_MATRIX_BREATHING +#undef ENABLE_RGB_MATRIX_BAND_SAT +#undef ENABLE_RGB_MATRIX_BAND_VAL +#undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#undef ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#undef ENABLE_RGB_MATRIX_CYCLE_ALL +#undef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#undef ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#undef ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#undef ENABLE_RGB_MATRIX_DUAL_BEACON +#undef ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#undef ENABLE_RGB_MATRIX_RAINBOW_BEACON +#undef ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#undef ENABLE_RGB_MATRIX_RAINDROPS +#undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#undef ENABLE_RGB_MATRIX_TYPING_HEATMAP +#undef ENABLE_RGB_MATRIX_DIGITAL_RAIN +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#undef ENABLE_RGB_MATRIX_SPLASH +#undef ENABLE_RGB_MATRIX_MULTISPLASH +#undef ENABLE_RGB_MATRIX_SOLID_SPLASH +#undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH // Most tactile encoders have detents every 4 stages #define ENCODER_RESOLUTION 4 diff --git a/keyboards/planck/light/config.h b/keyboards/planck/light/config.h index 8c55c3432f..cc7f1fe940 100644 --- a/keyboards/planck/light/config.h +++ b/keyboards/planck/light/config.h @@ -3,17 +3,19 @@ #include "config_common.h" #undef PRODUCT -#define PRODUCT Planck Light +#define PRODUCT Planck Light #define PRODUCT_ID 0xBEA2 #define DEVICE_VER 0x0001 #undef MATRIX_ROW_PINS #undef MATRIX_COL_PINS -#define MATRIX_ROW_PINS { B0, E7, F0, F1 } -#define MATRIX_COL_PINS { E6, E3, E4, D3, D4, D5, C0, A7, A6, E1, E0, D7 } +#define MATRIX_ROW_PINS \ + { B0, E7, F0, F1 } +#define MATRIX_COL_PINS \ + { E6, E3, E4, D3, D4, D5, C0, A7, A6, E1, E0, D7 } -#define AUDIO_PIN C6 +#define AUDIO_PIN C6 #define AUDIO_PIN_ALT B5 #undef BACKLIGHT_PIN @@ -31,10 +33,58 @@ // 0b1110111 AD <-> VCC // 0b1110101 AD <-> SCL // 0b1110110 AD <-> SDA -#define DRIVER_ADDR_1 0b1110100 -#define DRIVER_ADDR_2 0b1110110 +#define DRIVER_ADDR_1 0b1110100 +#define DRIVER_ADDR_2 0b1110110 -#define DRIVER_COUNT 2 +#define DRIVER_COUNT 2 #define DRIVER_1_LED_TOTAL 25 #define DRIVER_2_LED_TOTAL 24 -#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) +#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_PIXEL_RAIN +#define ENABLE_RGB_MATRIX_PIXEL_FLOW +#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH diff --git a/keyboards/rgbkb/mun/config.h b/keyboards/rgbkb/mun/config.h index 5d1a2ce202..af0876861e 100644 --- a/keyboards/rgbkb/mun/config.h +++ b/keyboards/rgbkb/mun/config.h @@ -87,6 +87,54 @@ #define RGB_MATRIX_KEYPRESSES #define RGB_MATRIX_FRAMEBUFFER_EFFECTS #define RGB_DISABLE_WHEN_USB_SUSPENDED +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_PIXEL_RAIN +#define ENABLE_RGB_MATRIX_PIXEL_FLOW +#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #if RGB_UNLIMITED_POWER #define RGBLIGHT_LIMIT_VAL 255 diff --git a/keyboards/rgbkb/mun/keymaps/default/config.h b/keyboards/rgbkb/mun/keymaps/default/config.h index 9719d17437..debd16163b 100644 --- a/keyboards/rgbkb/mun/keymaps/default/config.h +++ b/keyboards/rgbkb/mun/keymaps/default/config.h @@ -10,11 +10,11 @@ #pragma once // No need for the single versions when multi performance isn't a problem =D -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -#define DISABLE_RGB_MATRIX_SPLASH -#define DISABLE_RGB_MATRIX_SOLID_SPLASH +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#undef ENABLE_RGB_MATRIX_SPLASH +#undef ENABLE_RGB_MATRIX_SOLID_SPLASH // 20m timeout (20m * 60s * 1000mil) // #define RGB_DISABLE_TIMEOUT 1200000 diff --git a/keyboards/rgbkb/mun/keymaps/via/config.h b/keyboards/rgbkb/mun/keymaps/via/config.h index 967b309f63..cfcaa9a1ed 100644 --- a/keyboards/rgbkb/mun/keymaps/via/config.h +++ b/keyboards/rgbkb/mun/keymaps/via/config.h @@ -10,11 +10,11 @@ #pragma once // No need for the single versions when multi performance isn't a problem =D -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -#define DISABLE_RGB_MATRIX_SPLASH -#define DISABLE_RGB_MATRIX_SOLID_SPLASH +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#undef ENABLE_RGB_MATRIX_SPLASH +#undef ENABLE_RGB_MATRIX_SOLID_SPLASH // 20m timeout (20m * 60s * 1000mil) // #define RGB_DISABLE_TIMEOUT 1200000 diff --git a/keyboards/rgbkb/mun/keymaps/xulkal2/config.h b/keyboards/rgbkb/mun/keymaps/xulkal2/config.h index f36e5760fc..42e60191fc 100644 --- a/keyboards/rgbkb/mun/keymaps/xulkal2/config.h +++ b/keyboards/rgbkb/mun/keymaps/xulkal2/config.h @@ -22,11 +22,11 @@ #define RCPC_KEYS KC_RCTL, KC_TRNS, KC_EQL // No need for the single versions when multi performance isn't a problem =D -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -#define DISABLE_RGB_MATRIX_SPLASH -#define DISABLE_RGB_MATRIX_SOLID_SPLASH +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#undef ENABLE_RGB_MATRIX_SPLASH +#undef ENABLE_RGB_MATRIX_SOLID_SPLASH // 20m timeout (20m * 60s * 1000mil) // #define RGB_DISABLE_TIMEOUT 1200000 diff --git a/keyboards/rgbkb/pan/config.h b/keyboards/rgbkb/pan/config.h index a1a2aae9fc..43c534ca92 100644 --- a/keyboards/rgbkb/pan/config.h +++ b/keyboards/rgbkb/pan/config.h @@ -39,5 +39,54 @@ along with this program. If not, see . #define RGBLIGHT_LIMIT_VAL 120 #define USB_MAX_POWER_CONSUMPTION 500 +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_PIXEL_RAIN +#define ENABLE_RGB_MATRIX_PIXEL_FLOW +#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 diff --git a/keyboards/rgbkb/sol/config.h b/keyboards/rgbkb/sol/config.h index f42783f719..e813894549 100644 --- a/keyboards/rgbkb/sol/config.h +++ b/keyboards/rgbkb/sol/config.h @@ -48,6 +48,54 @@ along with this program. If not, see . #define RGBLIGHT_LIMIT_VAL 120 #endif #define RGB_MATRIX_MAXIMUM_BRIGHTNESS RGBLIGHT_LIMIT_VAL +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_PIXEL_RAIN +#define ENABLE_RGB_MATRIX_PIXEL_FLOW +#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #define LED_HITS_TO_REMEMBER 5 diff --git a/keyboards/sawnsprojects/satxri6key/config.h b/keyboards/sawnsprojects/satxri6key/config.h index 129f2536b9..bb334c7221 100644 --- a/keyboards/sawnsprojects/satxri6key/config.h +++ b/keyboards/sawnsprojects/satxri6key/config.h @@ -75,3 +75,48 @@ #define RGB_MATRIX_LED_FLUSH_LIMIT 16 // limits in milliseconds how frequently an animation will update the LEDs. 16 (16ms) is equivalent to limiting to 60fps (increases keyboard responsiveness) #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 // limits maximum brightness of LEDs to 200 out of 255. If not defined maximum brightness is set to 255 #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_REACTIVE_SIMPLE // Sets the default mode, if none has been set + +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_FRACTAL +#define ENABLE_RGB_MATRIX_PIXEL_RAIN + +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN + +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH diff --git a/keyboards/smallkeyboard/config.h b/keyboards/smallkeyboard/config.h index a343d767ff..2b8050422c 100644 --- a/keyboards/smallkeyboard/config.h +++ b/keyboards/smallkeyboard/config.h @@ -1,18 +1,18 @@ /* Copyright 2021 zhouqiong19840119 - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ #pragma once @@ -58,21 +58,50 @@ # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended # define RGB_MATRIX_KEYPRESSES # define RGB_MATRIX_FRAMEBUFFER_EFFECTS -# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -# define DISABLE_RGB_MATRIX_BAND_SAT -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -# define DISABLE_RGB_MATRIX_SPLASH -# define DISABLE_RGB_MATRIX_MULTISPLASH -# define DISABLE_RGB_MATRIX_SOLID_SPLASH -# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH -# define DISABLE_RGB_MATRIX_DIGITAL_RAIN +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +// #define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +// #define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +// #define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +// #define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_FRACTAL +#define ENABLE_RGB_MATRIX_PIXEL_RAIN + +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +// #define ENABLE_RGB_MATRIX_DIGITAL_RAIN + +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// #define ENABLE_RGB_MATRIX_SPLASH +// #define ENABLE_RGB_MATRIX_MULTISPLASH +// #define ENABLE_RGB_MATRIX_SOLID_SPLASH +// #define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH // This is a 7-bit address, that gets left-shifted and bit 0 // set to 0 for write, 1 for read (as per I2C protocol) diff --git a/keyboards/sofle/keymaps/devdev/config.h b/keyboards/sofle/keymaps/devdev/config.h index 32d0717352..c34da8382b 100644 --- a/keyboards/sofle/keymaps/devdev/config.h +++ b/keyboards/sofle/keymaps/devdev/config.h @@ -99,32 +99,32 @@ /* Disable the animations you don't want/need. You will need to disable a good number of these * * because they take up a lot of space. Disable until you can successfully compile your firmware. */ -// # define DISABLE_RGB_MATRIX_ALPHAS_MODS -// # define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -// # define DISABLE_RGB_MATRIX_BREATHING -// # define DISABLE_RGB_MATRIX_CYCLE_ALL -// # define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -// # define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN -// # define DISABLE_RGB_MATRIX_CYCLE_OUT_IN -// # define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -// # define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -// # define DISABLE_RGB_MATRIX_DUAL_BEACON -// # define DISABLE_RGB_MATRIX_RAINBOW_BEACON -// # define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS -// # define DISABLE_RGB_MATRIX_RAINDROPS -// # define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS -// # define DISABLE_RGB_MATRIX_TYPING_HEATMAP -// # define DISABLE_RGB_MATRIX_DIGITAL_RAIN -// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE -// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -// # define DISABLE_RGB_MATRIX_SPLASH -// # define DISABLE_RGB_MATRIX_MULTISPLASH -// # define DISABLE_RGB_MATRIX_SOLID_SPLASH -// # define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH + // # undef ENABLE_RGB_MATRIX_ALPHAS_MODS + // # undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN + // # undef ENABLE_RGB_MATRIX_BREATHING + // # undef ENABLE_RGB_MATRIX_CYCLE_ALL + // # undef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT + // # undef ENABLE_RGB_MATRIX_CYCLE_UP_DOWN + // # undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN + // # undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL + // # undef ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON + // # undef ENABLE_RGB_MATRIX_DUAL_BEACON + // # undef ENABLE_RGB_MATRIX_RAINBOW_BEACON + // # undef ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS + // # undef ENABLE_RGB_MATRIX_RAINDROPS + // # undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS + // # undef ENABLE_RGB_MATRIX_TYPING_HEATMAP + // # undef ENABLE_RGB_MATRIX_DIGITAL_RAIN + // # undef ENABLE_RGB_MATRIX_SOLID_REACTIVE + // # undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE + // # undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE + // # undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE + // # undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS + // # undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS + // # undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS + // # undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS + // # undef ENABLE_RGB_MATRIX_SPLASH + // # undef ENABLE_RGB_MATRIX_MULTISPLASH + // # undef ENABLE_RGB_MATRIX_SOLID_SPLASH + // # undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #endif diff --git a/keyboards/sofle/keymaps/rgb_default/config.h b/keyboards/sofle/keymaps/rgb_default/config.h index 32d0717352..c34da8382b 100644 --- a/keyboards/sofle/keymaps/rgb_default/config.h +++ b/keyboards/sofle/keymaps/rgb_default/config.h @@ -99,32 +99,32 @@ /* Disable the animations you don't want/need. You will need to disable a good number of these * * because they take up a lot of space. Disable until you can successfully compile your firmware. */ -// # define DISABLE_RGB_MATRIX_ALPHAS_MODS -// # define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -// # define DISABLE_RGB_MATRIX_BREATHING -// # define DISABLE_RGB_MATRIX_CYCLE_ALL -// # define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -// # define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN -// # define DISABLE_RGB_MATRIX_CYCLE_OUT_IN -// # define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -// # define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -// # define DISABLE_RGB_MATRIX_DUAL_BEACON -// # define DISABLE_RGB_MATRIX_RAINBOW_BEACON -// # define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS -// # define DISABLE_RGB_MATRIX_RAINDROPS -// # define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS -// # define DISABLE_RGB_MATRIX_TYPING_HEATMAP -// # define DISABLE_RGB_MATRIX_DIGITAL_RAIN -// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE -// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -// # define DISABLE_RGB_MATRIX_SPLASH -// # define DISABLE_RGB_MATRIX_MULTISPLASH -// # define DISABLE_RGB_MATRIX_SOLID_SPLASH -// # define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH + // # undef ENABLE_RGB_MATRIX_ALPHAS_MODS + // # undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN + // # undef ENABLE_RGB_MATRIX_BREATHING + // # undef ENABLE_RGB_MATRIX_CYCLE_ALL + // # undef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT + // # undef ENABLE_RGB_MATRIX_CYCLE_UP_DOWN + // # undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN + // # undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL + // # undef ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON + // # undef ENABLE_RGB_MATRIX_DUAL_BEACON + // # undef ENABLE_RGB_MATRIX_RAINBOW_BEACON + // # undef ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS + // # undef ENABLE_RGB_MATRIX_RAINDROPS + // # undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS + // # undef ENABLE_RGB_MATRIX_TYPING_HEATMAP + // # undef ENABLE_RGB_MATRIX_DIGITAL_RAIN + // # undef ENABLE_RGB_MATRIX_SOLID_REACTIVE + // # undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE + // # undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE + // # undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE + // # undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS + // # undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS + // # undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS + // # undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS + // # undef ENABLE_RGB_MATRIX_SPLASH + // # undef ENABLE_RGB_MATRIX_MULTISPLASH + // # undef ENABLE_RGB_MATRIX_SOLID_SPLASH + // # undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #endif diff --git a/keyboards/sowbug/68keys/config.h b/keyboards/sowbug/68keys/config.h index 21e3043354..0aad9a4574 100644 --- a/keyboards/sowbug/68keys/config.h +++ b/keyboards/sowbug/68keys/config.h @@ -52,3 +52,51 @@ #define DRIVER_LED_TOTAL RGBLED_NUM #define RGB_MATRIX_FRAMEBUFFER_EFFECTS #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 128 +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_PIXEL_RAIN +#define ENABLE_RGB_MATRIX_PIXEL_FLOW +#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH diff --git a/keyboards/sowbug/ansi_tkl/config.h b/keyboards/sowbug/ansi_tkl/config.h index 8e77245400..505453b72b 100644 --- a/keyboards/sowbug/ansi_tkl/config.h +++ b/keyboards/sowbug/ansi_tkl/config.h @@ -49,6 +49,55 @@ #define RGB_MATRIX_FRAMEBUFFER_EFFECTS #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 128 +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_PIXEL_RAIN +#define ENABLE_RGB_MATRIX_PIXEL_FLOW +#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + // Want backlighting and RGB Matrix patterns? See the note in the readme, // apply the patches, and then uncomment the line below as well as the ones // in rules.mk. diff --git a/keyboards/terrazzo/config.h b/keyboards/terrazzo/config.h index 907c94ff52..43720fa78f 100644 --- a/keyboards/terrazzo/config.h +++ b/keyboards/terrazzo/config.h @@ -91,27 +91,31 @@ so there is only one configuration. */ #define LED_MATRIX_MAXIMUM_BRIGHTNESS 20 #define LED_DISABLE_WHEN_USB_SUSPENDED -#define DISABLE_LED_MATRIX_ALPHAS_MODS -#define DISABLE_LED_MATRIX_BREATHING -#define DISABLE_LED_MATRIX_BAND -#define DISABLE_LED_MATRIX_BAND_PINWHEEL -#define DISABLE_LED_MATRIX_BAND_SPIRAL -#define DISABLE_LED_MATRIX_CYCLE_LEFT_RIGHT -#define DISABLE_LED_MATRIX_CYCLE_UP_DOWN -#define DISABLE_LED_MATRIX_CYCLE_OUT_IN -#define DISABLE_LED_MATRIX_DUAL_BEACON -#define DISABLE_LED_MATRIX_SOLID_REACTIVE_SIMPLE -#define DISABLE_LED_MATRIX_SOLID_REACTIVE_WIDE -#define DISABLE_LED_MATRIX_SOLID_REACTIVE_MULTIWIDE -#define DISABLE_LED_MATRIX_SOLID_REACTIVE_CROSS -#define DISABLE_LED_MATRIX_SOLID_REACTIVE_MULTICROSS -#define DISABLE_LED_MATRIX_SOLID_REACTIVE_NEXUS -#define DISABLE_LED_MATRIX_SOLID_REACTIVE_MULTINEXUS -#define DISABLE_LED_MATRIX_SOLID_SPLASH -#define DISABLE_LED_MATRIX_SOLID_MULTISPLASH -#define DISABLE_LED_MATRIX_WAVE_LEFT_RIGHT -#define DISABLE_LED_MATRIX_WAVE_UP_DOWN - +// LED Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_led_matrix?id=led-matrix-effects +// # define ENABLE_LED_MATRIX_ALPHAS_MODS +// # define ENABLE_LED_MATRIX_BREATHING +// # define ENABLE_LED_MATRIX_BAND +// # define ENABLE_LED_MATRIX_BAND_PINWHEEL +// # define ENABLE_LED_MATRIX_BAND_SPIRAL +// # define ENABLE_LED_MATRIX_CYCLE_LEFT_RIGHT +// # define ENABLE_LED_MATRIX_CYCLE_UP_DOWN +// # define ENABLE_LED_MATRIX_CYCLE_OUT_IN +// # define ENABLE_LED_MATRIX_DUAL_BEACON +// # if defined(LED_MATRIX_KEYREACTIVE_ENABLED) +// # define ENABLE_LED_MATRIX_SOLID_REACTIVE_SIMPLE +// # define ENABLE_LED_MATRIX_SOLID_REACTIVE_WIDE +// # define ENABLE_LED_MATRIX_SOLID_REACTIVE_MULTIWIDE +// # define ENABLE_LED_MATRIX_SOLID_REACTIVE_CROSS +// # define ENABLE_LED_MATRIX_SOLID_REACTIVE_MULTICROSS +// # define ENABLE_LED_MATRIX_SOLID_REACTIVE_NEXUS +// # define ENABLE_LED_MATRIX_SOLID_REACTIVE_MULTINEXUS +// # define ENABLE_LED_MATRIX_SPLASH +// # define ENABLE_LED_MATRIX_MULTISPLASH +// # endif +// # define ENABLE_LED_MATRIX_WAVE_LEFT_RIGHT +// # define ENABLE_LED_MATRIX_WAVE_UP_DOWN #endif /* Terrazzo animations */ diff --git a/keyboards/tkc/portico/config.h b/keyboards/tkc/portico/config.h index ba4f11a41e..35d615a023 100644 --- a/keyboards/tkc/portico/config.h +++ b/keyboards/tkc/portico/config.h @@ -47,22 +47,22 @@ along with this program. If not, see . # define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended # define RGB_MATRIX_KEYPRESSES -# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -# define DISABLE_RGB_MATRIX_BAND_SAT -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -# define DISABLE_RGB_MATRIX_SPLASH -# define DISABLE_RGB_MATRIX_MULTISPLASH -# define DISABLE_RGB_MATRIX_SOLID_SPLASH -# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH -# define DISABLE_RGB_MATRIX_DIGITAL_RAIN +# undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# undef ENABLE_RGB_MATRIX_BAND_SAT +# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# undef ENABLE_RGB_MATRIX_SPLASH +# undef ENABLE_RGB_MATRIX_MULTISPLASH +# undef ENABLE_RGB_MATRIX_SOLID_SPLASH +# undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH +# undef ENABLE_RGB_MATRIX_DIGITAL_RAIN # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 # define DRIVER_ADDR_1 0x74 # define DRIVER_ADDR_2 0x77 @@ -128,4 +128,4 @@ along with this program. If not, see . // VIA lighting is handled by the keyboard-level code #define VIA_CUSTOM_LIGHTING_ENABLE -#endif \ No newline at end of file +#endif diff --git a/keyboards/ungodly/launch_pad/config.h b/keyboards/ungodly/launch_pad/config.h index 66d940c1b7..cf639a4f28 100644 --- a/keyboards/ungodly/launch_pad/config.h +++ b/keyboards/ungodly/launch_pad/config.h @@ -67,43 +67,55 @@ # define RGB_MATRIX_SPD_STEP 10 # define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_PINWHEEL // default mode -/* Reduce the firmware size by only enabling the rgb animations you desire. */ -# define DISABLE_RGB_MATRIX_ALPHAS_MODS -# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -# define DISABLE_RGB_MATRIX_BREATHING -# define DISABLE_RGB_MATRIX_BAND_SAT -# define DISABLE_RGB_MATRIX_BAND_VAL -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL -# define DISABLE_RGB_MATRIX_CYCLE_ALL -# define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -# define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN -# define DISABLE_RGB_MATRIX_CYCLE_OUT_IN -# define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -# define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -# define DISABLE_RGB_MATRIX_DUAL_BEACON -// # define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL -# define DISABLE_RGB_MATRIX_CYCLE_SPIRAL -# define DISABLE_RGB_MATRIX_RAINBOW_BEACON -# define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS -# define DISABLE_RGB_MATRIX_RAINDROPS -# define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS -# define DISABLE_RGB_MATRIX_TYPING_HEATMAP -# define DISABLE_RGB_MATRIX_DIGITAL_RAIN -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -# define DISABLE_RGB_MATRIX_SPLASH -# define DISABLE_RGB_MATRIX_MULTISPLASH -# define DISABLE_RGB_MATRIX_SOLID_SPLASH -# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +// # define ENABLE_RGB_MATRIX_ALPHAS_MODS +// # define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +// # define ENABLE_RGB_MATRIX_BREATHING +// # define ENABLE_RGB_MATRIX_BAND_SAT +// # define ENABLE_RGB_MATRIX_BAND_VAL +// # define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +// # define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +// # define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +// # define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +// # define ENABLE_RGB_MATRIX_CYCLE_ALL +// # define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +// # define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +// # define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +// # define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +// # define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +// # define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +// # define ENABLE_RGB_MATRIX_DUAL_BEACON +// # define ENABLE_RGB_MATRIX_RAINBOW_BEACON +// # define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +// # define ENABLE_RGB_MATRIX_RAINDROPS +// # define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +// # define ENABLE_RGB_MATRIX_HUE_BREATHING +// # define ENABLE_RGB_MATRIX_HUE_PENDULUM +// # define ENABLE_RGB_MATRIX_HUE_WAVE +// # define ENABLE_RGB_MATRIX_PIXEL_RAIN +// # define ENABLE_RGB_MATRIX_PIXEL_FLOW +// # define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +// # define ENABLE_RGB_MATRIX_TYPING_HEATMAP +// # define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// # define ENABLE_RGB_MATRIX_SPLASH +// # define ENABLE_RGB_MATRIX_MULTISPLASH +// # define ENABLE_RGB_MATRIX_SOLID_SPLASH +// # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + #endif /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ diff --git a/keyboards/wekey/we27/config.h b/keyboards/wekey/we27/config.h index 332b476a4d..851e85aabb 100644 --- a/keyboards/wekey/we27/config.h +++ b/keyboards/wekey/we27/config.h @@ -66,56 +66,68 @@ along with this program. If not, see . #define RGB_MATRIX_STARTUP_SPD 127 // Sets the default animation speed, if none has been set #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_SOLID_COLOR // Sets the default mode, if none has been set -#define DISABLE_RGB_MATRIX_ALPHAS_MODS -#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -#define DISABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT -#define DISABLE_RGB_MATRIX_BREATHING -#define DISABLE_RGB_MATRIX_BAND_SAT // * -#define DISABLE_RGB_MATRIX_BAND_VAL -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL -#define DISABLE_RGB_MATRIX_CYCLE_ALL -#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN -#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN -#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -// #define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON // * -#define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL -#define DISABLE_RGB_MATRIX_CYCLE_SPIRAL -#define DISABLE_RGB_MATRIX_DUAL_BEACON -#define DISABLE_RGB_MATRIX_RAINBOW_BEACON -#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS -#define DISABLE_RGB_MATRIX_RAINDROPS -#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS -#define DISABLE_RGB_MATRIX_HUE_BREATHING -#define DISABLE_RGB_MATRIX_HUE_PENDULUM -#define DISABLE_RGB_MATRIX_HUE_WAVE -#define DISABLE_RGB_MATRIX_TYPING_HEATMAP -#define DISABLE_RGB_MATRIX_DIGITAL_RAIN -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -#define DISABLE_RGB_MATRIX_SPLASH -#define DISABLE_RGB_MATRIX_MULTISPLASH -#define DISABLE_RGB_MATRIX_SOLID_SPLASH -#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +// # define ENABLE_RGB_MATRIX_ALPHAS_MODS +// # define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +// # define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +// # define ENABLE_RGB_MATRIX_BREATHING +// # define ENABLE_RGB_MATRIX_BAND_SAT +// # define ENABLE_RGB_MATRIX_BAND_VAL +// # define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +// # define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +// # define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +// # define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +// # define ENABLE_RGB_MATRIX_CYCLE_ALL +// # define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +// # define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +// # define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +// # define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +// # define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +// # define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +// # define ENABLE_RGB_MATRIX_DUAL_BEACON +// # define ENABLE_RGB_MATRIX_RAINBOW_BEACON +// # define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +// # define ENABLE_RGB_MATRIX_RAINDROPS +// # define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +// # define ENABLE_RGB_MATRIX_HUE_BREATHING +// # define ENABLE_RGB_MATRIX_HUE_PENDULUM +// # define ENABLE_RGB_MATRIX_HUE_WAVE +// # define ENABLE_RGB_MATRIX_PIXEL_RAIN +// # define ENABLE_RGB_MATRIX_PIXEL_FLOW +// # define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +// # define ENABLE_RGB_MATRIX_TYPING_HEATMAP +// # define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// # define ENABLE_RGB_MATRIX_SPLASH +// # define ENABLE_RGB_MATRIX_MULTISPLASH +// # define ENABLE_RGB_MATRIX_SOLID_SPLASH +// # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #endif #ifdef ENCODER_ENABLE #define ENCODERS_PAD_A { D3 } -#define ENCODERS_PAD_B { D2 } -#define ENCODER_RESOLUTION 2 - -#define ENCODERS 1 -#define ENCODERS_CW_KEY { { 4, 5 } } +# define ENCODERS_PAD_B \ + { D2 } +# define ENCODER_RESOLUTION 2 + +# define ENCODERS 1 +# define ENCODERS_CW_KEY \ + { \ + { 4, 5 } \ + } #define ENCODERS_CCW_KEY { { 4, 3 } } #endif diff --git a/keyboards/work_louder/loop/config.h b/keyboards/work_louder/loop/config.h index bd8e3d075c..b40c1207fe 100644 --- a/keyboards/work_louder/loop/config.h +++ b/keyboards/work_louder/loop/config.h @@ -94,6 +94,55 @@ along with this program. If not, see . #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT // Sets the default mode, if none has been set #define RGB_DISABLE_WHEN_USB_SUSPENDED +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_PIXEL_RAIN +#define ENABLE_RGB_MATRIX_PIXEL_FLOW +#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 diff --git a/keyboards/work_louder/nano/config.h b/keyboards/work_louder/nano/config.h index 1a47e725bb..ac12c87199 100644 --- a/keyboards/work_louder/nano/config.h +++ b/keyboards/work_louder/nano/config.h @@ -92,6 +92,55 @@ along with this program. If not, see . #define RGB_MATRIX_DISABLE_KEYCODES #define RGB_DISABLE_WHEN_USB_SUSPENDED +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_PIXEL_RAIN +#define ENABLE_RGB_MATRIX_PIXEL_FLOW +#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 diff --git a/keyboards/work_louder/work_board/config.h b/keyboards/work_louder/work_board/config.h index fb9723db0b..78444e744f 100644 --- a/keyboards/work_louder/work_board/config.h +++ b/keyboards/work_louder/work_board/config.h @@ -83,6 +83,55 @@ along with this program. If not, see . #define RGB_MATRIX_DISABLE_KEYCODES #define RGB_DISABLE_WHEN_USB_SUSPENDED +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_PIXEL_RAIN +#define ENABLE_RGB_MATRIX_PIXEL_FLOW +#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ #define DEBOUNCE 5 diff --git a/keyboards/xbows/knight/config.h b/keyboards/xbows/knight/config.h index 1c89b83ecf..dfd477cbc9 100644 --- a/keyboards/xbows/knight/config.h +++ b/keyboards/xbows/knight/config.h @@ -44,6 +44,55 @@ # define RGB_MATRIX_CENTER \ { 92, 33 } +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + # define DRIVER_ADDR_1 0b1110100 # define DRIVER_ADDR_2 0b1110110 # define DRIVER_ADDR_3 0b1110101 diff --git a/keyboards/xbows/knight/keymaps/default/config.h b/keyboards/xbows/knight/keymaps/default/config.h index 22a7112f8c..fcd14ee048 100644 --- a/keyboards/xbows/knight/keymaps/default/config.h +++ b/keyboards/xbows/knight/keymaps/default/config.h @@ -17,34 +17,27 @@ #ifdef RGB_MATRIX_ENABLE # define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT // Sets the default mode, if none has been set +# undef ENABLE_RGB_MATRIX_SOLID_COLOR // Static single hue, no speed support +# undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN // Static gradient top to bottom, speed controls how much gradient changes +# undef ENABLE_RGB_MATRIX_BAND_SAT // Single hue band fading saturation scrolling left to right +# undef ENABLE_RGB_MATRIX_BAND_VAL // Single hue band fading brightness scrolling left to right +# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT // Single hue 3 blade spinning pinwheel fades saturation +# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAT // Single hue spinning spiral fades saturation +# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL // Full dual gradients scrolling out to in +# undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL // Full gradient spinning spiral around center of keyboard -# define DISABLE_RGB_MATRIX_ALPHAS_MODS // Static dual hue, speed is hue for secondary hue -# define DISABLE_RGB_MATRIX_SOLID_COLOR // Static single hue, no speed support -# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN // Static gradient top to bottom, speed controls how much gradient changes -# define DISABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT // Static gradient left to right, speed controls how much gradient changes -# define DISABLE_RGB_MATRIX_BAND_SAT // Single hue band fading saturation scrolling left to right -# define DISABLE_RGB_MATRIX_BAND_VAL // Single hue band fading brightness scrolling left to right -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT // Single hue 3 blade spinning pinwheel fades saturation -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL // Single hue 3 blade spinning pinwheel fades brightness -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT // Single hue spinning spiral fades saturation -# define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL // Full dual gradients scrolling out to in -# define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON // Full gradent Chevron shapped scrolling left to right -# define DISABLE_RGB_MATRIX_DUAL_BEACON // Full gradient spinning around center of keyboard -# define DISABLE_RGB_MATRIX_RAINBOW_BEACON // Full tighter gradient spinning around center of keyboard -# define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS // Full dual gradients spinning two halfs of keyboard -# define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS // Randomly changes a single key's hue and saturation -# define DISABLE_RGB_MATRIX_HUE_BREATHING // Hue shifts up a slight ammount at the same time, then shifts back -# define DISABLE_RGB_MATRIX_HUE_PENDULUM // Hue shifts up a slight ammount in a wave to the right, then back to the left -# define DISABLE_RGB_MATRIX_HUE_WAVE // Hue shifts up a slight ammount and then back down in a wave to the right +# undef ENABLE_RGB_MATRIX_DIGITAL_RAIN // That famous computer simulation +# undef ENABLE_RGB_MATRIX_TYPING_HEATMAP // How hot is your WPM! -# define DISABLE_RGB_MATRIX_DIGITAL_RAIN // That famous computer simulation -# define DISABLE_RGB_MATRIX_TYPING_HEATMAP // How hot is your WPM! - -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE // Hue & value pulse near multiple key hits then fades value out -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS // Hue & value pulse the same column and row of multiple key hits then fades value out -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS // Hue & value pulse away on the same column and row of a single key hit then fades value out -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS // Hue & value pulse away on the same column and row of multiple key hits then fades value out -# define DISABLE_RGB_MATRIX_MULTISPLASH // Full gradient & value pulse away from multiple key hits then fades value out -# define DISABLE_RGB_MATRIX_SOLID_SPLASH // Hue & value pulse away from a single key hit then fades value out +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE // Hue & value pulse near a single key hit then fades value out +// # undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE // Hue & value pulse near multiple key hits then fades value out +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS // Hue & value pulse the same column and row of a single key hit then fades value out +// # undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS // Hue & value pulse the same column and row of multiple key hits then fades value out +// # undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS // Hue & value pulse away on the same column and row of a single key hit then fades value out +// # undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS // Hue & value pulse away on the same column and row of multiple key hits then fades value out +//# undef ENABLE_RGB_MATRIX_SPLASH // Full gradient & value pulse away from a single key hit then fades value out +// # undef ENABLE_RGB_MATRIX_MULTISPLASH // Full gradient & value pulse away from multiple key hits then fades value out +// # undef ENABLE_RGB_MATRIX_SOLID_SPLASH // Hue & value pulse away from a single key hit then fades value out +//# undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH // Hue & value pulse away from multiple key hits then fades value out #endif diff --git a/keyboards/xbows/knight/keymaps/via/config.h b/keyboards/xbows/knight/keymaps/via/config.h index aa5e4c1cd2..cf06e7d07d 100644 --- a/keyboards/xbows/knight/keymaps/via/config.h +++ b/keyboards/xbows/knight/keymaps/via/config.h @@ -17,48 +17,47 @@ #ifdef RGB_MATRIX_ENABLE # define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT // Sets the default mode, if none has been set -# define DISABLE_RGB_MATRIX_ALPHAS_MODS // Static dual hue, speed is hue for secondary hue -# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN // Static gradient top to bottom, speed controls how much gradient changes -# define DISABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT // Static gradient left to right, speed controls how much gradient changes -//# define DISABLE_RGB_MATRIX_BREATHING // Single hue brightness cycling animation -# define DISABLE_RGB_MATRIX_BAND_SAT // Single hue band fading saturation scrolling left to right -# define DISABLE_RGB_MATRIX_BAND_VAL // Single hue band fading brightness scrolling left to right -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT // Single hue 3 blade spinning pinwheel fades saturation -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL // Single hue 3 blade spinning pinwheel fades brightness -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT // Single hue spinning spiral fades saturation -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL // Single hue spinning spiral fades brightness -//# define DISABLE_RGB_MATRIX_CYCLE_ALL // Full keyboard solid hue cycling through full gradient -//# define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT // Full gradient scrolling left to right -# define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN // Full gradient scrolling top to bottom -//# define DISABLE_RGB_MATRIX_CYCLE_OUT_IN // Full gradient scrolling out to in -# define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL // Full dual gradients scrolling out to in -# define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON // Full gradent Chevron shapped scrolling left to right -# define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL // Full gradient spinning pinwheel around center of keyboard -# define DISABLE_RGB_MATRIX_CYCLE_SPIRAL // Full gradient spinning spiral around center of keyboard -# define DISABLE_RGB_MATRIX_DUAL_BEACON // Full gradient spinning around center of keyboard -//# define DISABLE_RGB_MATRIX_RAINBOW_BEACON // Full tighter gradient spinning around center of keyboard -# define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS // Full dual gradients spinning two halfs of keyboard -# define DISABLE_RGB_MATRIX_RAINDROPS // Randomly changes a single key's hue -# define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS // Randomly changes a single key's hue and saturation -//# define DISABLE_RGB_MATRIX_HUE_BREATHING // Hue shifts up a slight ammount at the same time, then shifts back -# define DISABLE_RGB_MATRIX_HUE_PENDULUM // Hue shifts up a slight ammount in a wave to the right, then back to the left -//# define DISABLE_RGB_MATRIX_HUE_WAVE // Hue shifts up a slight ammount and then back down in a wave to the right +# undef ENABLE_RGB_MATRIX_ALPHAS_MODS // Static dual hue, speed is hue for secondary hue +# undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN // Static gradient top to bottom, speed controls how much gradient changes +# undef ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT // Static gradient left to right, speed controls how much gradient changes +//# undef ENABLE_RGB_MATRIX_BREATHING // Single hue brightness cycling animation +# undef ENABLE_RGB_MATRIX_BAND_SAT // Single hue band fading saturation scrolling left to right +# undef ENABLE_RGB_MATRIX_BAND_VAL // Single hue band fading brightness scrolling left to right +# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT // Single hue 3 blade spinning pinwheel fades saturation +# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL // Single hue 3 blade spinning pinwheel fades brightness +# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT // Single hue spinning spiral fades saturation +# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL // Single hue spinning spiral fades brightness +//# undef ENABLE_RGB_MATRIX_CYCLE_ALL // Full keyboard solid hue cycling through full gradient +//# undef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT // Full gradient scrolling left to right +# undef ENABLE_RGB_MATRIX_CYCLE_UP_DOWN // Full gradient scrolling top to bottom +//# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN // Full gradient scrolling out to in +# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL // Full dual gradients scrolling out to in +# undef ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON // Full gradent Chevron shapped scrolling left to right +# undef ENABLE_RGB_MATRIX_CYCLE_PINWHEEL // Full gradient spinning pinwheel around center of keyboard +# undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL // Full gradient spinning spiral around center of keyboard +# undef ENABLE_RGB_MATRIX_DUAL_BEACON // Full gradient spinning around center of keyboard +//# undef ENABLE_RGB_MATRIX_RAINBOW_BEACON // Full tighter gradient spinning around center of keyboard +# undef ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS // Full dual gradients spinning two halfs of keyboard +# undef ENABLE_RGB_MATRIX_RAINDROPS // Randomly changes a single key's hue +# undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS // Randomly changes a single key's hue and saturation +//# undef ENABLE_RGB_MATRIX_HUE_BREATHING // Hue shifts up a slight ammount at the same time, then shifts back +# undef ENABLE_RGB_MATRIX_HUE_PENDULUM // Hue shifts up a slight ammount in a wave to the right, then back to the left +//# undef ENABLE_RGB_MATRIX_HUE_WAVE // Hue shifts up a slight ammount and then back down in a wave to the right -# define DISABLE_RGB_MATRIX_DIGITAL_RAIN // That famous computer simulation -# define DISABLE_RGB_MATRIX_TYPING_HEATMAP // How hot is your WPM! - -//# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE // Pulses keys hit to hue & value then fades value out -//# define DISABLE_RGB_MATRIX_SOLID_REACTIVE // Static single hue, pulses keys hit to shifted hue then fades to current hue -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE // Hue & value pulse near a single key hit then fades value out -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE // Hue & value pulse near multiple key hits then fades value out -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS // Hue & value pulse the same column and row of a single key hit then fades value out -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS // Hue & value pulse the same column and row of multiple key hits then fades value out -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS // Hue & value pulse away on the same column and row of a single key hit then fades value out -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS // Hue & value pulse away on the same column and row of multiple key hits then fades value out -//# define DISABLE_RGB_MATRIX_SPLASH // Full gradient & value pulse away from a single key hit then fades value out -# define DISABLE_RGB_MATRIX_MULTISPLASH // Full gradient & value pulse away from multiple key hits then fades value out -# define DISABLE_RGB_MATRIX_SOLID_SPLASH // Hue & value pulse away from a single key hit then fades value out -//# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH // Hue & value pulse away from multiple key hits then fades value out +# undef ENABLE_RGB_MATRIX_DIGITAL_RAIN // That famous computer simulation +# undef ENABLE_RGB_MATRIX_TYPING_HEATMAP // How hot is your WPM! +//# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE // Pulses keys hit to hue & value then fades value out +//# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE // Static single hue, pulses keys hit to shifted hue then fades to current hue +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE // Hue & value pulse near a single key hit then fades value out +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE // Hue & value pulse near multiple key hits then fades value out +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS // Hue & value pulse the same column and row of a single key hit then fades value out +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS // Hue & value pulse the same column and row of multiple key hits then fades value out +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS // Hue & value pulse away on the same column and row of a single key hit then fades value out +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS // Hue & value pulse away on the same column and row of multiple key hits then fades value out +//# undef ENABLE_RGB_MATRIX_SPLASH // Full gradient & value pulse away from a single key hit then fades value out +# undef ENABLE_RGB_MATRIX_MULTISPLASH // Full gradient & value pulse away from multiple key hits then fades value out +# undef ENABLE_RGB_MATRIX_SOLID_SPLASH // Hue & value pulse away from a single key hit then fades value out +//# undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH // Hue & value pulse away from multiple key hits then fades value out #endif diff --git a/keyboards/xbows/knight_plus/config.h b/keyboards/xbows/knight_plus/config.h index 5282476b4f..ee71bb6baf 100644 --- a/keyboards/xbows/knight_plus/config.h +++ b/keyboards/xbows/knight_plus/config.h @@ -44,6 +44,55 @@ # define RGB_MATRIX_CENTER \ { 92, 43 } +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + # define DRIVER_ADDR_1 0b1110100 # define DRIVER_ADDR_2 0b1110110 # define DRIVER_ADDR_3 0b1110101 diff --git a/keyboards/xbows/knight_plus/keymaps/default/config.h b/keyboards/xbows/knight_plus/keymaps/default/config.h index 22a7112f8c..fcd14ee048 100644 --- a/keyboards/xbows/knight_plus/keymaps/default/config.h +++ b/keyboards/xbows/knight_plus/keymaps/default/config.h @@ -17,34 +17,27 @@ #ifdef RGB_MATRIX_ENABLE # define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT // Sets the default mode, if none has been set +# undef ENABLE_RGB_MATRIX_SOLID_COLOR // Static single hue, no speed support +# undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN // Static gradient top to bottom, speed controls how much gradient changes +# undef ENABLE_RGB_MATRIX_BAND_SAT // Single hue band fading saturation scrolling left to right +# undef ENABLE_RGB_MATRIX_BAND_VAL // Single hue band fading brightness scrolling left to right +# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT // Single hue 3 blade spinning pinwheel fades saturation +# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAT // Single hue spinning spiral fades saturation +# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL // Full dual gradients scrolling out to in +# undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL // Full gradient spinning spiral around center of keyboard -# define DISABLE_RGB_MATRIX_ALPHAS_MODS // Static dual hue, speed is hue for secondary hue -# define DISABLE_RGB_MATRIX_SOLID_COLOR // Static single hue, no speed support -# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN // Static gradient top to bottom, speed controls how much gradient changes -# define DISABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT // Static gradient left to right, speed controls how much gradient changes -# define DISABLE_RGB_MATRIX_BAND_SAT // Single hue band fading saturation scrolling left to right -# define DISABLE_RGB_MATRIX_BAND_VAL // Single hue band fading brightness scrolling left to right -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT // Single hue 3 blade spinning pinwheel fades saturation -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL // Single hue 3 blade spinning pinwheel fades brightness -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT // Single hue spinning spiral fades saturation -# define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL // Full dual gradients scrolling out to in -# define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON // Full gradent Chevron shapped scrolling left to right -# define DISABLE_RGB_MATRIX_DUAL_BEACON // Full gradient spinning around center of keyboard -# define DISABLE_RGB_MATRIX_RAINBOW_BEACON // Full tighter gradient spinning around center of keyboard -# define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS // Full dual gradients spinning two halfs of keyboard -# define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS // Randomly changes a single key's hue and saturation -# define DISABLE_RGB_MATRIX_HUE_BREATHING // Hue shifts up a slight ammount at the same time, then shifts back -# define DISABLE_RGB_MATRIX_HUE_PENDULUM // Hue shifts up a slight ammount in a wave to the right, then back to the left -# define DISABLE_RGB_MATRIX_HUE_WAVE // Hue shifts up a slight ammount and then back down in a wave to the right +# undef ENABLE_RGB_MATRIX_DIGITAL_RAIN // That famous computer simulation +# undef ENABLE_RGB_MATRIX_TYPING_HEATMAP // How hot is your WPM! -# define DISABLE_RGB_MATRIX_DIGITAL_RAIN // That famous computer simulation -# define DISABLE_RGB_MATRIX_TYPING_HEATMAP // How hot is your WPM! - -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE // Hue & value pulse near multiple key hits then fades value out -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS // Hue & value pulse the same column and row of multiple key hits then fades value out -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS // Hue & value pulse away on the same column and row of a single key hit then fades value out -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS // Hue & value pulse away on the same column and row of multiple key hits then fades value out -# define DISABLE_RGB_MATRIX_MULTISPLASH // Full gradient & value pulse away from multiple key hits then fades value out -# define DISABLE_RGB_MATRIX_SOLID_SPLASH // Hue & value pulse away from a single key hit then fades value out +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE // Hue & value pulse near a single key hit then fades value out +// # undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE // Hue & value pulse near multiple key hits then fades value out +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS // Hue & value pulse the same column and row of a single key hit then fades value out +// # undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS // Hue & value pulse the same column and row of multiple key hits then fades value out +// # undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS // Hue & value pulse away on the same column and row of a single key hit then fades value out +// # undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS // Hue & value pulse away on the same column and row of multiple key hits then fades value out +//# undef ENABLE_RGB_MATRIX_SPLASH // Full gradient & value pulse away from a single key hit then fades value out +// # undef ENABLE_RGB_MATRIX_MULTISPLASH // Full gradient & value pulse away from multiple key hits then fades value out +// # undef ENABLE_RGB_MATRIX_SOLID_SPLASH // Hue & value pulse away from a single key hit then fades value out +//# undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH // Hue & value pulse away from multiple key hits then fades value out #endif diff --git a/keyboards/xbows/knight_plus/keymaps/via/config.h b/keyboards/xbows/knight_plus/keymaps/via/config.h index aa5e4c1cd2..cf06e7d07d 100644 --- a/keyboards/xbows/knight_plus/keymaps/via/config.h +++ b/keyboards/xbows/knight_plus/keymaps/via/config.h @@ -17,48 +17,47 @@ #ifdef RGB_MATRIX_ENABLE # define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT // Sets the default mode, if none has been set -# define DISABLE_RGB_MATRIX_ALPHAS_MODS // Static dual hue, speed is hue for secondary hue -# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN // Static gradient top to bottom, speed controls how much gradient changes -# define DISABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT // Static gradient left to right, speed controls how much gradient changes -//# define DISABLE_RGB_MATRIX_BREATHING // Single hue brightness cycling animation -# define DISABLE_RGB_MATRIX_BAND_SAT // Single hue band fading saturation scrolling left to right -# define DISABLE_RGB_MATRIX_BAND_VAL // Single hue band fading brightness scrolling left to right -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT // Single hue 3 blade spinning pinwheel fades saturation -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL // Single hue 3 blade spinning pinwheel fades brightness -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT // Single hue spinning spiral fades saturation -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL // Single hue spinning spiral fades brightness -//# define DISABLE_RGB_MATRIX_CYCLE_ALL // Full keyboard solid hue cycling through full gradient -//# define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT // Full gradient scrolling left to right -# define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN // Full gradient scrolling top to bottom -//# define DISABLE_RGB_MATRIX_CYCLE_OUT_IN // Full gradient scrolling out to in -# define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL // Full dual gradients scrolling out to in -# define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON // Full gradent Chevron shapped scrolling left to right -# define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL // Full gradient spinning pinwheel around center of keyboard -# define DISABLE_RGB_MATRIX_CYCLE_SPIRAL // Full gradient spinning spiral around center of keyboard -# define DISABLE_RGB_MATRIX_DUAL_BEACON // Full gradient spinning around center of keyboard -//# define DISABLE_RGB_MATRIX_RAINBOW_BEACON // Full tighter gradient spinning around center of keyboard -# define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS // Full dual gradients spinning two halfs of keyboard -# define DISABLE_RGB_MATRIX_RAINDROPS // Randomly changes a single key's hue -# define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS // Randomly changes a single key's hue and saturation -//# define DISABLE_RGB_MATRIX_HUE_BREATHING // Hue shifts up a slight ammount at the same time, then shifts back -# define DISABLE_RGB_MATRIX_HUE_PENDULUM // Hue shifts up a slight ammount in a wave to the right, then back to the left -//# define DISABLE_RGB_MATRIX_HUE_WAVE // Hue shifts up a slight ammount and then back down in a wave to the right +# undef ENABLE_RGB_MATRIX_ALPHAS_MODS // Static dual hue, speed is hue for secondary hue +# undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN // Static gradient top to bottom, speed controls how much gradient changes +# undef ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT // Static gradient left to right, speed controls how much gradient changes +//# undef ENABLE_RGB_MATRIX_BREATHING // Single hue brightness cycling animation +# undef ENABLE_RGB_MATRIX_BAND_SAT // Single hue band fading saturation scrolling left to right +# undef ENABLE_RGB_MATRIX_BAND_VAL // Single hue band fading brightness scrolling left to right +# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT // Single hue 3 blade spinning pinwheel fades saturation +# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL // Single hue 3 blade spinning pinwheel fades brightness +# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT // Single hue spinning spiral fades saturation +# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL // Single hue spinning spiral fades brightness +//# undef ENABLE_RGB_MATRIX_CYCLE_ALL // Full keyboard solid hue cycling through full gradient +//# undef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT // Full gradient scrolling left to right +# undef ENABLE_RGB_MATRIX_CYCLE_UP_DOWN // Full gradient scrolling top to bottom +//# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN // Full gradient scrolling out to in +# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL // Full dual gradients scrolling out to in +# undef ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON // Full gradent Chevron shapped scrolling left to right +# undef ENABLE_RGB_MATRIX_CYCLE_PINWHEEL // Full gradient spinning pinwheel around center of keyboard +# undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL // Full gradient spinning spiral around center of keyboard +# undef ENABLE_RGB_MATRIX_DUAL_BEACON // Full gradient spinning around center of keyboard +//# undef ENABLE_RGB_MATRIX_RAINBOW_BEACON // Full tighter gradient spinning around center of keyboard +# undef ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS // Full dual gradients spinning two halfs of keyboard +# undef ENABLE_RGB_MATRIX_RAINDROPS // Randomly changes a single key's hue +# undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS // Randomly changes a single key's hue and saturation +//# undef ENABLE_RGB_MATRIX_HUE_BREATHING // Hue shifts up a slight ammount at the same time, then shifts back +# undef ENABLE_RGB_MATRIX_HUE_PENDULUM // Hue shifts up a slight ammount in a wave to the right, then back to the left +//# undef ENABLE_RGB_MATRIX_HUE_WAVE // Hue shifts up a slight ammount and then back down in a wave to the right -# define DISABLE_RGB_MATRIX_DIGITAL_RAIN // That famous computer simulation -# define DISABLE_RGB_MATRIX_TYPING_HEATMAP // How hot is your WPM! - -//# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE // Pulses keys hit to hue & value then fades value out -//# define DISABLE_RGB_MATRIX_SOLID_REACTIVE // Static single hue, pulses keys hit to shifted hue then fades to current hue -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE // Hue & value pulse near a single key hit then fades value out -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE // Hue & value pulse near multiple key hits then fades value out -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS // Hue & value pulse the same column and row of a single key hit then fades value out -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS // Hue & value pulse the same column and row of multiple key hits then fades value out -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS // Hue & value pulse away on the same column and row of a single key hit then fades value out -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS // Hue & value pulse away on the same column and row of multiple key hits then fades value out -//# define DISABLE_RGB_MATRIX_SPLASH // Full gradient & value pulse away from a single key hit then fades value out -# define DISABLE_RGB_MATRIX_MULTISPLASH // Full gradient & value pulse away from multiple key hits then fades value out -# define DISABLE_RGB_MATRIX_SOLID_SPLASH // Hue & value pulse away from a single key hit then fades value out -//# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH // Hue & value pulse away from multiple key hits then fades value out +# undef ENABLE_RGB_MATRIX_DIGITAL_RAIN // That famous computer simulation +# undef ENABLE_RGB_MATRIX_TYPING_HEATMAP // How hot is your WPM! +//# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE // Pulses keys hit to hue & value then fades value out +//# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE // Static single hue, pulses keys hit to shifted hue then fades to current hue +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE // Hue & value pulse near a single key hit then fades value out +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE // Hue & value pulse near multiple key hits then fades value out +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS // Hue & value pulse the same column and row of a single key hit then fades value out +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS // Hue & value pulse the same column and row of multiple key hits then fades value out +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS // Hue & value pulse away on the same column and row of a single key hit then fades value out +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS // Hue & value pulse away on the same column and row of multiple key hits then fades value out +//# undef ENABLE_RGB_MATRIX_SPLASH // Full gradient & value pulse away from a single key hit then fades value out +# undef ENABLE_RGB_MATRIX_MULTISPLASH // Full gradient & value pulse away from multiple key hits then fades value out +# undef ENABLE_RGB_MATRIX_SOLID_SPLASH // Hue & value pulse away from a single key hit then fades value out +//# undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH // Hue & value pulse away from multiple key hits then fades value out #endif diff --git a/keyboards/xbows/nature/config.h b/keyboards/xbows/nature/config.h index 2c886533bb..6bf33d89a1 100644 --- a/keyboards/xbows/nature/config.h +++ b/keyboards/xbows/nature/config.h @@ -45,34 +45,55 @@ { 92, 33 } # define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT // Sets the default mode, if none has been set -# define DISABLE_RGB_MATRIX_ALPHAS_MODS // Static dual hue, speed is hue for secondary hue -# define DISABLE_RGB_MATRIX_SOLID_COLOR // Static single hue, no speed support -# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN // Static gradient top to bottom, speed controls how much gradient changes -# define DISABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT // Static gradient left to right, speed controls how much gradient changes -# define DISABLE_RGB_MATRIX_BAND_SAT // Single hue band fading saturation scrolling left to right -# define DISABLE_RGB_MATRIX_BAND_VAL // Single hue band fading brightness scrolling left to right -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT // Single hue 3 blade spinning pinwheel fades saturation -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL // Single hue 3 blade spinning pinwheel fades brightness -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT // Single hue spinning spiral fades saturation -# define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL // Full dual gradients scrolling out to in -# define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON // Full gradent Chevron shapped scrolling left to right -# define DISABLE_RGB_MATRIX_DUAL_BEACON // Full gradient spinning around center of keyboard -# define DISABLE_RGB_MATRIX_RAINBOW_BEACON // Full tighter gradient spinning around center of keyboard -# define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS // Full dual gradients spinning two halfs of keyboard -# define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS // Randomly changes a single key's hue and saturation -# define DISABLE_RGB_MATRIX_HUE_BREATHING // Hue shifts up a slight ammount at the same time, then shifts back -# define DISABLE_RGB_MATRIX_HUE_PENDULUM // Hue shifts up a slight ammount in a wave to the right, then back to the left -# define DISABLE_RGB_MATRIX_HUE_WAVE // Hue shifts up a slight ammount and then back down in a wave to the right -# define DISABLE_RGB_MATRIX_DIGITAL_RAIN // That famous computer simulation -# define DISABLE_RGB_MATRIX_TYPING_HEATMAP // How hot is your WPM! - -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE // Hue & value pulse near multiple key hits then fades value out -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS // Hue & value pulse the same column and row of multiple key hits then fades value out -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS // Hue & value pulse away on the same column and row of a single key hit then fades value out -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS // Hue & value pulse away on the same column and row of multiple key hits then fades value out -# define DISABLE_RGB_MATRIX_MULTISPLASH // Full gradient & value pulse away from multiple key hits then fades value out -# define DISABLE_RGB_MATRIX_SOLID_SPLASH // Hue & value pulse away from a single key hit then fades value out +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +// # define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +// # define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +// # define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +// # define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +// # define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// # define ENABLE_RGB_MATRIX_SPLASH +// # define ENABLE_RGB_MATRIX_MULTISPLASH +// # define ENABLE_RGB_MATRIX_SOLID_SPLASH +// # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH # define DRIVER_ADDR_1 0b1110100 # define DRIVER_ADDR_2 0b1110110 diff --git a/keyboards/xbows/numpad/config.h b/keyboards/xbows/numpad/config.h index 4617ce36af..59616eba3b 100644 --- a/keyboards/xbows/numpad/config.h +++ b/keyboards/xbows/numpad/config.h @@ -44,6 +44,55 @@ # define RGB_MATRIX_CENTER \ { 30, 32 } +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + # define DRIVER_ADDR_1 0b1110111 # define DRIVER_COUNT 1 # define DRIVER_LED_TOTAL 22 diff --git a/keyboards/xbows/numpad/keymaps/default/config.h b/keyboards/xbows/numpad/keymaps/default/config.h index 22a7112f8c..3e3358e344 100644 --- a/keyboards/xbows/numpad/keymaps/default/config.h +++ b/keyboards/xbows/numpad/keymaps/default/config.h @@ -15,36 +15,30 @@ */ #pragma once -#ifdef RGB_MATRIX_ENABLE -# define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT // Sets the default mode, if none has been set + #ifdef RGB_MATRIX_ENABLE + # define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT // Sets the default mode, if none has been set -# define DISABLE_RGB_MATRIX_ALPHAS_MODS // Static dual hue, speed is hue for secondary hue -# define DISABLE_RGB_MATRIX_SOLID_COLOR // Static single hue, no speed support -# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN // Static gradient top to bottom, speed controls how much gradient changes -# define DISABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT // Static gradient left to right, speed controls how much gradient changes -# define DISABLE_RGB_MATRIX_BAND_SAT // Single hue band fading saturation scrolling left to right -# define DISABLE_RGB_MATRIX_BAND_VAL // Single hue band fading brightness scrolling left to right -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT // Single hue 3 blade spinning pinwheel fades saturation -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL // Single hue 3 blade spinning pinwheel fades brightness -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT // Single hue spinning spiral fades saturation -# define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL // Full dual gradients scrolling out to in -# define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON // Full gradent Chevron shapped scrolling left to right -# define DISABLE_RGB_MATRIX_DUAL_BEACON // Full gradient spinning around center of keyboard -# define DISABLE_RGB_MATRIX_RAINBOW_BEACON // Full tighter gradient spinning around center of keyboard -# define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS // Full dual gradients spinning two halfs of keyboard -# define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS // Randomly changes a single key's hue and saturation -# define DISABLE_RGB_MATRIX_HUE_BREATHING // Hue shifts up a slight ammount at the same time, then shifts back -# define DISABLE_RGB_MATRIX_HUE_PENDULUM // Hue shifts up a slight ammount in a wave to the right, then back to the left -# define DISABLE_RGB_MATRIX_HUE_WAVE // Hue shifts up a slight ammount and then back down in a wave to the right +# undef ENABLE_RGB_MATRIX_SOLID_COLOR // Static single hue, no speed support +# undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN // Static gradient top to bottom, speed controls how much gradient changes +# undef ENABLE_RGB_MATRIX_BAND_SAT // Single hue band fading saturation scrolling left to right +# undef ENABLE_RGB_MATRIX_BAND_VAL // Single hue band fading brightness scrolling left to right +# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT // Single hue 3 blade spinning pinwheel fades saturation +# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAT // Single hue spinning spiral fades saturation +# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL // Full dual gradients scrolling out to in +# undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL // Full gradient spinning spiral around center of keyboard -# define DISABLE_RGB_MATRIX_DIGITAL_RAIN // That famous computer simulation -# define DISABLE_RGB_MATRIX_TYPING_HEATMAP // How hot is your WPM! +# undef ENABLE_RGB_MATRIX_DIGITAL_RAIN // That famous computer simulation +# undef ENABLE_RGB_MATRIX_TYPING_HEATMAP // How hot is your WPM! -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE // Hue & value pulse near multiple key hits then fades value out -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS // Hue & value pulse the same column and row of multiple key hits then fades value out -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS // Hue & value pulse away on the same column and row of a single key hit then fades value out -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS // Hue & value pulse away on the same column and row of multiple key hits then fades value out -# define DISABLE_RGB_MATRIX_MULTISPLASH // Full gradient & value pulse away from multiple key hits then fades value out -# define DISABLE_RGB_MATRIX_SOLID_SPLASH // Hue & value pulse away from a single key hit then fades value out +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE // Hue & value pulse near a single key hit then fades value out +// # undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE // Hue & value pulse near multiple key hits then fades value out +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS // Hue & value pulse the same column and row of a single key hit then fades value out +// # undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS // Hue & value pulse the same column and row of multiple key hits then fades value out +// # undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS // Hue & value pulse away on the same column and row of a single key hit then fades value out +// # undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS // Hue & value pulse away on the same column and row of multiple key hits then fades value out +//# undef ENABLE_RGB_MATRIX_SPLASH // Full gradient & value pulse away from a single key hit then fades value out +// # undef ENABLE_RGB_MATRIX_MULTISPLASH // Full gradient & value pulse away from multiple key hits then fades value out +// # undef ENABLE_RGB_MATRIX_SOLID_SPLASH // Hue & value pulse away from a single key hit then fades value out +//# undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH // Hue & value pulse away from multiple key hits then fades value out #endif diff --git a/keyboards/xbows/numpad/keymaps/via/config.h b/keyboards/xbows/numpad/keymaps/via/config.h index aa5e4c1cd2..cf06e7d07d 100644 --- a/keyboards/xbows/numpad/keymaps/via/config.h +++ b/keyboards/xbows/numpad/keymaps/via/config.h @@ -17,48 +17,47 @@ #ifdef RGB_MATRIX_ENABLE # define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT // Sets the default mode, if none has been set -# define DISABLE_RGB_MATRIX_ALPHAS_MODS // Static dual hue, speed is hue for secondary hue -# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN // Static gradient top to bottom, speed controls how much gradient changes -# define DISABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT // Static gradient left to right, speed controls how much gradient changes -//# define DISABLE_RGB_MATRIX_BREATHING // Single hue brightness cycling animation -# define DISABLE_RGB_MATRIX_BAND_SAT // Single hue band fading saturation scrolling left to right -# define DISABLE_RGB_MATRIX_BAND_VAL // Single hue band fading brightness scrolling left to right -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT // Single hue 3 blade spinning pinwheel fades saturation -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL // Single hue 3 blade spinning pinwheel fades brightness -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT // Single hue spinning spiral fades saturation -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL // Single hue spinning spiral fades brightness -//# define DISABLE_RGB_MATRIX_CYCLE_ALL // Full keyboard solid hue cycling through full gradient -//# define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT // Full gradient scrolling left to right -# define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN // Full gradient scrolling top to bottom -//# define DISABLE_RGB_MATRIX_CYCLE_OUT_IN // Full gradient scrolling out to in -# define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL // Full dual gradients scrolling out to in -# define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON // Full gradent Chevron shapped scrolling left to right -# define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL // Full gradient spinning pinwheel around center of keyboard -# define DISABLE_RGB_MATRIX_CYCLE_SPIRAL // Full gradient spinning spiral around center of keyboard -# define DISABLE_RGB_MATRIX_DUAL_BEACON // Full gradient spinning around center of keyboard -//# define DISABLE_RGB_MATRIX_RAINBOW_BEACON // Full tighter gradient spinning around center of keyboard -# define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS // Full dual gradients spinning two halfs of keyboard -# define DISABLE_RGB_MATRIX_RAINDROPS // Randomly changes a single key's hue -# define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS // Randomly changes a single key's hue and saturation -//# define DISABLE_RGB_MATRIX_HUE_BREATHING // Hue shifts up a slight ammount at the same time, then shifts back -# define DISABLE_RGB_MATRIX_HUE_PENDULUM // Hue shifts up a slight ammount in a wave to the right, then back to the left -//# define DISABLE_RGB_MATRIX_HUE_WAVE // Hue shifts up a slight ammount and then back down in a wave to the right +# undef ENABLE_RGB_MATRIX_ALPHAS_MODS // Static dual hue, speed is hue for secondary hue +# undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN // Static gradient top to bottom, speed controls how much gradient changes +# undef ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT // Static gradient left to right, speed controls how much gradient changes +//# undef ENABLE_RGB_MATRIX_BREATHING // Single hue brightness cycling animation +# undef ENABLE_RGB_MATRIX_BAND_SAT // Single hue band fading saturation scrolling left to right +# undef ENABLE_RGB_MATRIX_BAND_VAL // Single hue band fading brightness scrolling left to right +# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT // Single hue 3 blade spinning pinwheel fades saturation +# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL // Single hue 3 blade spinning pinwheel fades brightness +# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT // Single hue spinning spiral fades saturation +# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL // Single hue spinning spiral fades brightness +//# undef ENABLE_RGB_MATRIX_CYCLE_ALL // Full keyboard solid hue cycling through full gradient +//# undef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT // Full gradient scrolling left to right +# undef ENABLE_RGB_MATRIX_CYCLE_UP_DOWN // Full gradient scrolling top to bottom +//# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN // Full gradient scrolling out to in +# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL // Full dual gradients scrolling out to in +# undef ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON // Full gradent Chevron shapped scrolling left to right +# undef ENABLE_RGB_MATRIX_CYCLE_PINWHEEL // Full gradient spinning pinwheel around center of keyboard +# undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL // Full gradient spinning spiral around center of keyboard +# undef ENABLE_RGB_MATRIX_DUAL_BEACON // Full gradient spinning around center of keyboard +//# undef ENABLE_RGB_MATRIX_RAINBOW_BEACON // Full tighter gradient spinning around center of keyboard +# undef ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS // Full dual gradients spinning two halfs of keyboard +# undef ENABLE_RGB_MATRIX_RAINDROPS // Randomly changes a single key's hue +# undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS // Randomly changes a single key's hue and saturation +//# undef ENABLE_RGB_MATRIX_HUE_BREATHING // Hue shifts up a slight ammount at the same time, then shifts back +# undef ENABLE_RGB_MATRIX_HUE_PENDULUM // Hue shifts up a slight ammount in a wave to the right, then back to the left +//# undef ENABLE_RGB_MATRIX_HUE_WAVE // Hue shifts up a slight ammount and then back down in a wave to the right -# define DISABLE_RGB_MATRIX_DIGITAL_RAIN // That famous computer simulation -# define DISABLE_RGB_MATRIX_TYPING_HEATMAP // How hot is your WPM! - -//# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE // Pulses keys hit to hue & value then fades value out -//# define DISABLE_RGB_MATRIX_SOLID_REACTIVE // Static single hue, pulses keys hit to shifted hue then fades to current hue -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE // Hue & value pulse near a single key hit then fades value out -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE // Hue & value pulse near multiple key hits then fades value out -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS // Hue & value pulse the same column and row of a single key hit then fades value out -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS // Hue & value pulse the same column and row of multiple key hits then fades value out -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS // Hue & value pulse away on the same column and row of a single key hit then fades value out -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS // Hue & value pulse away on the same column and row of multiple key hits then fades value out -//# define DISABLE_RGB_MATRIX_SPLASH // Full gradient & value pulse away from a single key hit then fades value out -# define DISABLE_RGB_MATRIX_MULTISPLASH // Full gradient & value pulse away from multiple key hits then fades value out -# define DISABLE_RGB_MATRIX_SOLID_SPLASH // Hue & value pulse away from a single key hit then fades value out -//# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH // Hue & value pulse away from multiple key hits then fades value out +# undef ENABLE_RGB_MATRIX_DIGITAL_RAIN // That famous computer simulation +# undef ENABLE_RGB_MATRIX_TYPING_HEATMAP // How hot is your WPM! +//# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE // Pulses keys hit to hue & value then fades value out +//# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE // Static single hue, pulses keys hit to shifted hue then fades to current hue +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE // Hue & value pulse near a single key hit then fades value out +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE // Hue & value pulse near multiple key hits then fades value out +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS // Hue & value pulse the same column and row of a single key hit then fades value out +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS // Hue & value pulse the same column and row of multiple key hits then fades value out +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS // Hue & value pulse away on the same column and row of a single key hit then fades value out +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS // Hue & value pulse away on the same column and row of multiple key hits then fades value out +//# undef ENABLE_RGB_MATRIX_SPLASH // Full gradient & value pulse away from a single key hit then fades value out +# undef ENABLE_RGB_MATRIX_MULTISPLASH // Full gradient & value pulse away from multiple key hits then fades value out +# undef ENABLE_RGB_MATRIX_SOLID_SPLASH // Hue & value pulse away from a single key hit then fades value out +//# undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH // Hue & value pulse away from multiple key hits then fades value out #endif diff --git a/keyboards/xbows/ranger/config.h b/keyboards/xbows/ranger/config.h index 7a67afd7da..1447a26d03 100644 --- a/keyboards/xbows/ranger/config.h +++ b/keyboards/xbows/ranger/config.h @@ -42,6 +42,56 @@ # define RGB_MATRIX_KEYPRESSES # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 # define RGB_MATRIX_CENTER { 103, 32 } + +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + # define DRIVER_ADDR_1 0b1110100 # define DRIVER_ADDR_2 0b1110101 # define DRIVER_ADDR_3 0b1110110 diff --git a/keyboards/xbows/ranger/keymaps/default/config.h b/keyboards/xbows/ranger/keymaps/default/config.h index 22a7112f8c..2e662068f6 100644 --- a/keyboards/xbows/ranger/keymaps/default/config.h +++ b/keyboards/xbows/ranger/keymaps/default/config.h @@ -18,33 +18,27 @@ #ifdef RGB_MATRIX_ENABLE # define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT // Sets the default mode, if none has been set -# define DISABLE_RGB_MATRIX_ALPHAS_MODS // Static dual hue, speed is hue for secondary hue -# define DISABLE_RGB_MATRIX_SOLID_COLOR // Static single hue, no speed support -# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN // Static gradient top to bottom, speed controls how much gradient changes -# define DISABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT // Static gradient left to right, speed controls how much gradient changes -# define DISABLE_RGB_MATRIX_BAND_SAT // Single hue band fading saturation scrolling left to right -# define DISABLE_RGB_MATRIX_BAND_VAL // Single hue band fading brightness scrolling left to right -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT // Single hue 3 blade spinning pinwheel fades saturation -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL // Single hue 3 blade spinning pinwheel fades brightness -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT // Single hue spinning spiral fades saturation -# define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL // Full dual gradients scrolling out to in -# define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON // Full gradent Chevron shapped scrolling left to right -# define DISABLE_RGB_MATRIX_DUAL_BEACON // Full gradient spinning around center of keyboard -# define DISABLE_RGB_MATRIX_RAINBOW_BEACON // Full tighter gradient spinning around center of keyboard -# define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS // Full dual gradients spinning two halfs of keyboard -# define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS // Randomly changes a single key's hue and saturation -# define DISABLE_RGB_MATRIX_HUE_BREATHING // Hue shifts up a slight ammount at the same time, then shifts back -# define DISABLE_RGB_MATRIX_HUE_PENDULUM // Hue shifts up a slight ammount in a wave to the right, then back to the left -# define DISABLE_RGB_MATRIX_HUE_WAVE // Hue shifts up a slight ammount and then back down in a wave to the right +# undef ENABLE_RGB_MATRIX_SOLID_COLOR // Static single hue, no speed support +# undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN // Static gradient top to bottom, speed controls how much gradient changes +# undef ENABLE_RGB_MATRIX_BAND_SAT // Single hue band fading saturation scrolling left to right +# undef ENABLE_RGB_MATRIX_BAND_VAL // Single hue band fading brightness scrolling left to right +# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT // Single hue 3 blade spinning pinwheel fades saturation +# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAT // Single hue spinning spiral fades saturation +# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL // Full dual gradients scrolling out to in +# undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL // Full gradient spinning spiral around center of keyboard -# define DISABLE_RGB_MATRIX_DIGITAL_RAIN // That famous computer simulation -# define DISABLE_RGB_MATRIX_TYPING_HEATMAP // How hot is your WPM! +# undef ENABLE_RGB_MATRIX_DIGITAL_RAIN // That famous computer simulation +# undef ENABLE_RGB_MATRIX_TYPING_HEATMAP // How hot is your WPM! -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE // Hue & value pulse near multiple key hits then fades value out -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS // Hue & value pulse the same column and row of multiple key hits then fades value out -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS // Hue & value pulse away on the same column and row of a single key hit then fades value out -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS // Hue & value pulse away on the same column and row of multiple key hits then fades value out -# define DISABLE_RGB_MATRIX_MULTISPLASH // Full gradient & value pulse away from multiple key hits then fades value out -# define DISABLE_RGB_MATRIX_SOLID_SPLASH // Hue & value pulse away from a single key hit then fades value out +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE // Hue & value pulse near a single key hit then fades value out +// # undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE // Hue & value pulse near multiple key hits then fades value out +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS // Hue & value pulse the same column and row of a single key hit then fades value out +// # undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS // Hue & value pulse the same column and row of multiple key hits then fades value out +// # undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS // Hue & value pulse away on the same column and row of a single key hit then fades value out +// # undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS // Hue & value pulse away on the same column and row of multiple key hits then fades value out +//# undef ENABLE_RGB_MATRIX_SPLASH // Full gradient & value pulse away from a single key hit then fades value out +// # undef ENABLE_RGB_MATRIX_MULTISPLASH // Full gradient & value pulse away from multiple key hits then fades value out +// # undef ENABLE_RGB_MATRIX_SOLID_SPLASH // Hue & value pulse away from a single key hit then fades value out +//# undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH // Hue & value pulse away from multiple key hits then fades value out #endif diff --git a/keyboards/xbows/ranger/keymaps/via/config.h b/keyboards/xbows/ranger/keymaps/via/config.h index aa5e4c1cd2..cf06e7d07d 100644 --- a/keyboards/xbows/ranger/keymaps/via/config.h +++ b/keyboards/xbows/ranger/keymaps/via/config.h @@ -17,48 +17,47 @@ #ifdef RGB_MATRIX_ENABLE # define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT // Sets the default mode, if none has been set -# define DISABLE_RGB_MATRIX_ALPHAS_MODS // Static dual hue, speed is hue for secondary hue -# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN // Static gradient top to bottom, speed controls how much gradient changes -# define DISABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT // Static gradient left to right, speed controls how much gradient changes -//# define DISABLE_RGB_MATRIX_BREATHING // Single hue brightness cycling animation -# define DISABLE_RGB_MATRIX_BAND_SAT // Single hue band fading saturation scrolling left to right -# define DISABLE_RGB_MATRIX_BAND_VAL // Single hue band fading brightness scrolling left to right -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT // Single hue 3 blade spinning pinwheel fades saturation -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL // Single hue 3 blade spinning pinwheel fades brightness -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT // Single hue spinning spiral fades saturation -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL // Single hue spinning spiral fades brightness -//# define DISABLE_RGB_MATRIX_CYCLE_ALL // Full keyboard solid hue cycling through full gradient -//# define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT // Full gradient scrolling left to right -# define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN // Full gradient scrolling top to bottom -//# define DISABLE_RGB_MATRIX_CYCLE_OUT_IN // Full gradient scrolling out to in -# define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL // Full dual gradients scrolling out to in -# define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON // Full gradent Chevron shapped scrolling left to right -# define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL // Full gradient spinning pinwheel around center of keyboard -# define DISABLE_RGB_MATRIX_CYCLE_SPIRAL // Full gradient spinning spiral around center of keyboard -# define DISABLE_RGB_MATRIX_DUAL_BEACON // Full gradient spinning around center of keyboard -//# define DISABLE_RGB_MATRIX_RAINBOW_BEACON // Full tighter gradient spinning around center of keyboard -# define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS // Full dual gradients spinning two halfs of keyboard -# define DISABLE_RGB_MATRIX_RAINDROPS // Randomly changes a single key's hue -# define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS // Randomly changes a single key's hue and saturation -//# define DISABLE_RGB_MATRIX_HUE_BREATHING // Hue shifts up a slight ammount at the same time, then shifts back -# define DISABLE_RGB_MATRIX_HUE_PENDULUM // Hue shifts up a slight ammount in a wave to the right, then back to the left -//# define DISABLE_RGB_MATRIX_HUE_WAVE // Hue shifts up a slight ammount and then back down in a wave to the right +# undef ENABLE_RGB_MATRIX_ALPHAS_MODS // Static dual hue, speed is hue for secondary hue +# undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN // Static gradient top to bottom, speed controls how much gradient changes +# undef ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT // Static gradient left to right, speed controls how much gradient changes +//# undef ENABLE_RGB_MATRIX_BREATHING // Single hue brightness cycling animation +# undef ENABLE_RGB_MATRIX_BAND_SAT // Single hue band fading saturation scrolling left to right +# undef ENABLE_RGB_MATRIX_BAND_VAL // Single hue band fading brightness scrolling left to right +# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT // Single hue 3 blade spinning pinwheel fades saturation +# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL // Single hue 3 blade spinning pinwheel fades brightness +# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT // Single hue spinning spiral fades saturation +# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL // Single hue spinning spiral fades brightness +//# undef ENABLE_RGB_MATRIX_CYCLE_ALL // Full keyboard solid hue cycling through full gradient +//# undef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT // Full gradient scrolling left to right +# undef ENABLE_RGB_MATRIX_CYCLE_UP_DOWN // Full gradient scrolling top to bottom +//# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN // Full gradient scrolling out to in +# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL // Full dual gradients scrolling out to in +# undef ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON // Full gradent Chevron shapped scrolling left to right +# undef ENABLE_RGB_MATRIX_CYCLE_PINWHEEL // Full gradient spinning pinwheel around center of keyboard +# undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL // Full gradient spinning spiral around center of keyboard +# undef ENABLE_RGB_MATRIX_DUAL_BEACON // Full gradient spinning around center of keyboard +//# undef ENABLE_RGB_MATRIX_RAINBOW_BEACON // Full tighter gradient spinning around center of keyboard +# undef ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS // Full dual gradients spinning two halfs of keyboard +# undef ENABLE_RGB_MATRIX_RAINDROPS // Randomly changes a single key's hue +# undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS // Randomly changes a single key's hue and saturation +//# undef ENABLE_RGB_MATRIX_HUE_BREATHING // Hue shifts up a slight ammount at the same time, then shifts back +# undef ENABLE_RGB_MATRIX_HUE_PENDULUM // Hue shifts up a slight ammount in a wave to the right, then back to the left +//# undef ENABLE_RGB_MATRIX_HUE_WAVE // Hue shifts up a slight ammount and then back down in a wave to the right -# define DISABLE_RGB_MATRIX_DIGITAL_RAIN // That famous computer simulation -# define DISABLE_RGB_MATRIX_TYPING_HEATMAP // How hot is your WPM! - -//# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE // Pulses keys hit to hue & value then fades value out -//# define DISABLE_RGB_MATRIX_SOLID_REACTIVE // Static single hue, pulses keys hit to shifted hue then fades to current hue -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE // Hue & value pulse near a single key hit then fades value out -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE // Hue & value pulse near multiple key hits then fades value out -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS // Hue & value pulse the same column and row of a single key hit then fades value out -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS // Hue & value pulse the same column and row of multiple key hits then fades value out -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS // Hue & value pulse away on the same column and row of a single key hit then fades value out -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS // Hue & value pulse away on the same column and row of multiple key hits then fades value out -//# define DISABLE_RGB_MATRIX_SPLASH // Full gradient & value pulse away from a single key hit then fades value out -# define DISABLE_RGB_MATRIX_MULTISPLASH // Full gradient & value pulse away from multiple key hits then fades value out -# define DISABLE_RGB_MATRIX_SOLID_SPLASH // Hue & value pulse away from a single key hit then fades value out -//# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH // Hue & value pulse away from multiple key hits then fades value out +# undef ENABLE_RGB_MATRIX_DIGITAL_RAIN // That famous computer simulation +# undef ENABLE_RGB_MATRIX_TYPING_HEATMAP // How hot is your WPM! +//# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE // Pulses keys hit to hue & value then fades value out +//# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE // Static single hue, pulses keys hit to shifted hue then fades to current hue +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE // Hue & value pulse near a single key hit then fades value out +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE // Hue & value pulse near multiple key hits then fades value out +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS // Hue & value pulse the same column and row of a single key hit then fades value out +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS // Hue & value pulse the same column and row of multiple key hits then fades value out +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS // Hue & value pulse away on the same column and row of a single key hit then fades value out +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS // Hue & value pulse away on the same column and row of multiple key hits then fades value out +//# undef ENABLE_RGB_MATRIX_SPLASH // Full gradient & value pulse away from a single key hit then fades value out +# undef ENABLE_RGB_MATRIX_MULTISPLASH // Full gradient & value pulse away from multiple key hits then fades value out +# undef ENABLE_RGB_MATRIX_SOLID_SPLASH // Hue & value pulse away from a single key hit then fades value out +//# undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH // Hue & value pulse away from multiple key hits then fades value out #endif diff --git a/keyboards/xbows/woody/config.h b/keyboards/xbows/woody/config.h index ea27508da8..9d04eb84c4 100644 --- a/keyboards/xbows/woody/config.h +++ b/keyboards/xbows/woody/config.h @@ -19,25 +19,60 @@ #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended #define RGB_MATRIX_KEYPRESSES #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 -#define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -#define DISABLE_RGB_MATRIX_BAND_SAT -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -#define DISABLE_RGB_MATRIX_SPLASH -#define DISABLE_RGB_MATRIX_MULTISPLASH -#define DISABLE_RGB_MATRIX_SOLID_SPLASH -#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH -#define DISABLE_RGB_MATRIX_DIGITAL_RAIN -#define DRIVER_ADDR_1 0b1110100 -#define DRIVER_ADDR_2 0b1110110 -#define DRIVER_COUNT 2 -#define DRIVER_1_LED_TOTAL 35 -#define DRIVER_2_LED_TOTAL 32 -#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) + +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +// # define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +// # define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +// # define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +// # define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +// # define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// # define ENABLE_RGB_MATRIX_SPLASH +// # define ENABLE_RGB_MATRIX_MULTISPLASH +// # define ENABLE_RGB_MATRIX_SOLID_SPLASH +// # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + +# define DRIVER_ADDR_1 0b1110100 +# define DRIVER_ADDR_2 0b1110110 +# define DRIVER_COUNT 2 +# define DRIVER_1_LED_TOTAL 35 +# define DRIVER_2_LED_TOTAL 32 +# define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL) #endif diff --git a/keyboards/xelus/dawn60/rev1_qmk/config.h b/keyboards/xelus/dawn60/rev1_qmk/config.h index 07de129c0b..67c88efb4c 100644 --- a/keyboards/xelus/dawn60/rev1_qmk/config.h +++ b/keyboards/xelus/dawn60/rev1_qmk/config.h @@ -71,3 +71,52 @@ // | ? | Shift | Fn | vs | Shift | Up | Fn | // `------------------' `-------------------' #define RGB_BACKLIGHT_USE_SPLIT_RIGHT_SHIFT 1 + +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_PIXEL_RAIN +#define ENABLE_RGB_MATRIX_PIXEL_FLOW +#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH diff --git a/keyboards/xelus/pachi/rgb/config.h b/keyboards/xelus/pachi/rgb/config.h index f144db47a2..ee937119ba 100644 --- a/keyboards/xelus/pachi/rgb/config.h +++ b/keyboards/xelus/pachi/rgb/config.h @@ -71,5 +71,53 @@ #define RGB_MATRIX_KEYPRESSES #define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_PIXEL_RAIN +#define ENABLE_RGB_MATRIX_PIXEL_FLOW +#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #define FORCE_NKRO diff --git a/keyboards/xelus/valor/rev2/config.h b/keyboards/xelus/valor/rev2/config.h index 502cc482ec..5956914c8a 100644 --- a/keyboards/xelus/valor/rev2/config.h +++ b/keyboards/xelus/valor/rev2/config.h @@ -86,3 +86,52 @@ #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 #define RGB_DISABLE_WHEN_USB_SUSPENDED #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CUSTOM_test_mode + +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_PIXEL_RAIN +#define ENABLE_RGB_MATRIX_PIXEL_FLOW +#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH diff --git a/keyboards/yncognito/batpad/config.h b/keyboards/yncognito/batpad/config.h index 7ca4072e07..50fec3d69a 100644 --- a/keyboards/yncognito/batpad/config.h +++ b/keyboards/yncognito/batpad/config.h @@ -55,3 +55,52 @@ along with this program. If not, see . #define RGB_MATRIX_LED_FLUSH_LIMIT 16 #define RGB_MATRIX_MAXIMUM_BRIGHTNESS 255 #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL + +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_PIXEL_RAIN +#define ENABLE_RGB_MATRIX_PIXEL_FLOW +#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH diff --git a/layouts/community/65_ansi_blocker/brandonschlack/config.h b/layouts/community/65_ansi_blocker/brandonschlack/config.h index e7b09f422c..ea8ca61901 100644 --- a/layouts/community/65_ansi_blocker/brandonschlack/config.h +++ b/layouts/community/65_ansi_blocker/brandonschlack/config.h @@ -17,46 +17,46 @@ #ifdef RGB_MATRIX_ENABLE // Disable RGB Effects -#define DISABLE_RGB_MATRIX_ALPHAS_MODS -// #define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -// #define DISABLE_RGB_MATRIX_BREATHING -#define DISABLE_RGB_MATRIX_BAND_SAT -#define DISABLE_RGB_MATRIX_BAND_VAL -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL -#define DISABLE_RGB_MATRIX_CYCLE_ALL -#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN -#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN -#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -#define DISABLE_RGB_MATRIX_DUAL_BEACON -#define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL -#define DISABLE_RGB_MATRIX_CYCLE_SPIRAL -#define DISABLE_RGB_MATRIX_RAINBOW_BEACON -#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS -#define DISABLE_RGB_MATRIX_RAINDROPS -#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS -#define DISABLE_RGB_MATRIX_TYPING_HEATMAP -#define DISABLE_RGB_MATRIX_DIGITAL_RAIN -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -#define DISABLE_RGB_MATRIX_SPLASH -#define DISABLE_RGB_MATRIX_MULTISPLASH -#define DISABLE_RGB_MATRIX_SOLID_SPLASH -#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +# undef ENABLE_RGB_MATRIX_ALPHAS_MODS +// #undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +// #undef ENABLE_RGB_MATRIX_BREATHING +# undef ENABLE_RGB_MATRIX_BAND_SAT +# undef ENABLE_RGB_MATRIX_BAND_VAL +# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# undef ENABLE_RGB_MATRIX_CYCLE_ALL +# undef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# undef ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# undef ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# undef ENABLE_RGB_MATRIX_DUAL_BEACON +# undef ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# undef ENABLE_RGB_MATRIX_RAINBOW_BEACON +# undef ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# undef ENABLE_RGB_MATRIX_RAINDROPS +# undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# undef ENABLE_RGB_MATRIX_TYPING_HEATMAP +# undef ENABLE_RGB_MATRIX_DIGITAL_RAIN +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# undef ENABLE_RGB_MATRIX_SPLASH +# undef ENABLE_RGB_MATRIX_MULTISPLASH +# undef ENABLE_RGB_MATRIX_SOLID_SPLASH +# undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH -#define QMK_KEYS_PER_SCAN 4 +# define QMK_KEYS_PER_SCAN 4 -#define USB_LED_CAPS_LOCK_SCANCODE 30 +# define USB_LED_CAPS_LOCK_SCANCODE 30 #endif #ifdef KEYBOARD_massdrop_alt diff --git a/layouts/community/65_ansi_blocker_split_bs/brandonschlack-split/config.h b/layouts/community/65_ansi_blocker_split_bs/brandonschlack-split/config.h index 9506c7fe91..fe3dcd41c2 100644 --- a/layouts/community/65_ansi_blocker_split_bs/brandonschlack-split/config.h +++ b/layouts/community/65_ansi_blocker_split_bs/brandonschlack-split/config.h @@ -17,46 +17,46 @@ #ifdef RGB_MATRIX_ENABLE // Disable RGB Effects -#define DISABLE_RGB_MATRIX_ALPHAS_MODS -// #define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -// #define DISABLE_RGB_MATRIX_BREATHING -#define DISABLE_RGB_MATRIX_BAND_SAT -#define DISABLE_RGB_MATRIX_BAND_VAL -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL -#define DISABLE_RGB_MATRIX_CYCLE_ALL -#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN -#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN -#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -#define DISABLE_RGB_MATRIX_DUAL_BEACON -#define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL -#define DISABLE_RGB_MATRIX_CYCLE_SPIRAL -#define DISABLE_RGB_MATRIX_RAINBOW_BEACON -#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS -#define DISABLE_RGB_MATRIX_RAINDROPS -#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS -#define DISABLE_RGB_MATRIX_TYPING_HEATMAP -#define DISABLE_RGB_MATRIX_DIGITAL_RAIN -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -#define DISABLE_RGB_MATRIX_SPLASH -#define DISABLE_RGB_MATRIX_MULTISPLASH -#define DISABLE_RGB_MATRIX_SOLID_SPLASH -#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +# undef ENABLE_RGB_MATRIX_ALPHAS_MODS +// #undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +// #undef ENABLE_RGB_MATRIX_BREATHING +# undef ENABLE_RGB_MATRIX_BAND_SAT +# undef ENABLE_RGB_MATRIX_BAND_VAL +# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# undef ENABLE_RGB_MATRIX_CYCLE_ALL +# undef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# undef ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# undef ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# undef ENABLE_RGB_MATRIX_DUAL_BEACON +# undef ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# undef ENABLE_RGB_MATRIX_RAINBOW_BEACON +# undef ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# undef ENABLE_RGB_MATRIX_RAINDROPS +# undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# undef ENABLE_RGB_MATRIX_TYPING_HEATMAP +# undef ENABLE_RGB_MATRIX_DIGITAL_RAIN +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# undef ENABLE_RGB_MATRIX_SPLASH +# undef ENABLE_RGB_MATRIX_MULTISPLASH +# undef ENABLE_RGB_MATRIX_SOLID_SPLASH +# undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH -#define QMK_KEYS_PER_SCAN 4 +# define QMK_KEYS_PER_SCAN 4 -#define USB_LED_CAPS_LOCK_SCANCODE 30 +# define USB_LED_CAPS_LOCK_SCANCODE 30 #endif #ifdef KEYBOARD_massdrop_alt diff --git a/quantum/led_matrix/animations/alpha_mods_anim.h b/quantum/led_matrix/animations/alpha_mods_anim.h index c82b2aa388..4d017894a1 100644 --- a/quantum/led_matrix/animations/alpha_mods_anim.h +++ b/quantum/led_matrix/animations/alpha_mods_anim.h @@ -21,4 +21,4 @@ bool ALPHAS_MODS(effect_params_t* params) { } # endif // LED_MATRIX_CUSTOM_EFFECT_IMPLS -#endif // DISABLE_LED_MATRIX_ALPHAS_MODS +#endif // ENABLE_LED_MATRIX_ALPHAS_MODS diff --git a/quantum/led_matrix/animations/band_anim.h b/quantum/led_matrix/animations/band_anim.h index 5548787b88..293be4f67a 100644 --- a/quantum/led_matrix/animations/band_anim.h +++ b/quantum/led_matrix/animations/band_anim.h @@ -10,4 +10,4 @@ static uint8_t BAND_math(uint8_t val, uint8_t i, uint8_t time) { bool BAND(effect_params_t* params) { return effect_runner_i(params, &BAND_math); } # endif // LED_MATRIX_CUSTOM_EFFECT_IMPLS -#endif // DISABLE_LED_MATRIX_BAND +#endif // ENABLE_LED_MATRIX_BAND diff --git a/quantum/led_matrix/animations/band_pinwheel_anim.h b/quantum/led_matrix/animations/band_pinwheel_anim.h index 89651582d5..f47a3869ce 100644 --- a/quantum/led_matrix/animations/band_pinwheel_anim.h +++ b/quantum/led_matrix/animations/band_pinwheel_anim.h @@ -7,4 +7,4 @@ static uint8_t BAND_PINWHEEL_math(uint8_t val, int16_t dx, int16_t dy, uint8_t t bool BAND_PINWHEEL(effect_params_t* params) { return effect_runner_dx_dy(params, &BAND_PINWHEEL_math); } # endif // LED_MATRIX_CUSTOM_EFFECT_IMPLS -#endif // DISABLE_LED_MATRIX_BAND_PINWHEEL +#endif // ENABLE_LED_MATRIX_BAND_PINWHEEL diff --git a/quantum/led_matrix/animations/band_spiral_anim.h b/quantum/led_matrix/animations/band_spiral_anim.h index 70b0ffaea9..a4bd382181 100644 --- a/quantum/led_matrix/animations/band_spiral_anim.h +++ b/quantum/led_matrix/animations/band_spiral_anim.h @@ -7,4 +7,4 @@ static uint8_t BAND_SPIRAL_math(uint8_t val, int16_t dx, int16_t dy, uint8_t dis bool BAND_SPIRAL(effect_params_t* params) { return effect_runner_dx_dy_dist(params, &BAND_SPIRAL_math); } # endif // LED_MATRIX_CUSTOM_EFFECT_IMPLS -#endif // DISABLE_LED_MATRIX_BAND_SPIRAL +#endif // ENABLE_LED_MATRIX_BAND_SPIRAL diff --git a/quantum/led_matrix/animations/breathing_anim.h b/quantum/led_matrix/animations/breathing_anim.h index d9cc2de23b..899925f516 100644 --- a/quantum/led_matrix/animations/breathing_anim.h +++ b/quantum/led_matrix/animations/breathing_anim.h @@ -16,4 +16,4 @@ bool BREATHING(effect_params_t* params) { } # endif // LED_MATRIX_CUSTOM_EFFECT_IMPLS -#endif // DISABLE_LED_MATRIX_BREATHING +#endif // ENABLE_LED_MATRIX_BREATHING diff --git a/quantum/led_matrix/animations/cycle_left_right_anim.h b/quantum/led_matrix/animations/cycle_left_right_anim.h index 769e6d7942..1a8999b831 100644 --- a/quantum/led_matrix/animations/cycle_left_right_anim.h +++ b/quantum/led_matrix/animations/cycle_left_right_anim.h @@ -7,4 +7,4 @@ static uint8_t CYCLE_LEFT_RIGHT_math(uint8_t val, uint8_t i, uint8_t time) { ret bool CYCLE_LEFT_RIGHT(effect_params_t* params) { return effect_runner_i(params, &CYCLE_LEFT_RIGHT_math); } # endif // LED_MATRIX_CUSTOM_EFFECT_IMPLS -#endif // DISABLE_LED_MATRIX_CYCLE_LEFT_RIGHT +#endif // ENABLE_LED_MATRIX_CYCLE_LEFT_RIGHT diff --git a/quantum/led_matrix/animations/cycle_out_in_anim.h b/quantum/led_matrix/animations/cycle_out_in_anim.h index 6adf9c25ff..77d3a14b6f 100644 --- a/quantum/led_matrix/animations/cycle_out_in_anim.h +++ b/quantum/led_matrix/animations/cycle_out_in_anim.h @@ -7,4 +7,4 @@ static uint8_t CYCLE_OUT_IN_math(uint8_t val, int16_t dx, int16_t dy, uint8_t di bool CYCLE_OUT_IN(effect_params_t* params) { return effect_runner_dx_dy_dist(params, &CYCLE_OUT_IN_math); } # endif // LED_MATRIX_CUSTOM_EFFECT_IMPLS -#endif // DISABLE_LED_MATRIX_CYCLE_OUT_IN +#endif // ENABLE_LED_MATRIX_CYCLE_OUT_IN diff --git a/quantum/led_matrix/animations/cycle_up_down_anim.h b/quantum/led_matrix/animations/cycle_up_down_anim.h index 7a5868ac26..b25947199c 100644 --- a/quantum/led_matrix/animations/cycle_up_down_anim.h +++ b/quantum/led_matrix/animations/cycle_up_down_anim.h @@ -7,4 +7,4 @@ static uint8_t CYCLE_UP_DOWN_math(uint8_t val, uint8_t i, uint8_t time) { return bool CYCLE_UP_DOWN(effect_params_t* params) { return effect_runner_i(params, &CYCLE_UP_DOWN_math); } # endif // LED_MATRIX_CUSTOM_EFFECT_IMPLS -#endif // DISABLE_LED_MATRIX_CYCLE_UP_DOWN +#endif // ENABLE_LED_MATRIX_CYCLE_UP_DOWN diff --git a/quantum/led_matrix/animations/dual_beacon_anim.h b/quantum/led_matrix/animations/dual_beacon_anim.h index 3552c9fc39..81735e323c 100644 --- a/quantum/led_matrix/animations/dual_beacon_anim.h +++ b/quantum/led_matrix/animations/dual_beacon_anim.h @@ -7,4 +7,4 @@ static uint8_t DUAL_BEACON_math(uint8_t val, int8_t sin, int8_t cos, uint8_t i, bool DUAL_BEACON(effect_params_t* params) { return effect_runner_sin_cos_i(params, &DUAL_BEACON_math); } # endif // LED_MATRIX_CUSTOM_EFFECT_IMPLS -#endif // DISABLE_LED_MATRIX_DUAL_BEACON +#endif // ENABLE_LED_MATRIX_DUAL_BEACON diff --git a/quantum/led_matrix/animations/solid_reactive_cross.h b/quantum/led_matrix/animations/solid_reactive_cross.h index 3a3c46be13..a149e9a929 100644 --- a/quantum/led_matrix/animations/solid_reactive_cross.h +++ b/quantum/led_matrix/animations/solid_reactive_cross.h @@ -1,5 +1,5 @@ #ifdef LED_MATRIX_KEYREACTIVE_ENABLED -# if !defined(DISABLE_LED_MATRIX_SOLID_REACTIVE_CROSS) || !defined(DISABLE_LED_MATRIX_SOLID_REACTIVE_MULTICROSS) +# if defined(ENABLE_LED_MATRIX_SOLID_REACTIVE_CROSS) || defined(ENABLE_LED_MATRIX_SOLID_REACTIVE_MULTICROSS) # ifdef ENABLE_LED_MATRIX_SOLID_REACTIVE_CROSS LED_MATRIX_EFFECT(SOLID_REACTIVE_CROSS) @@ -31,5 +31,5 @@ bool SOLID_REACTIVE_MULTICROSS(effect_params_t* params) { return effect_runner_r # endif # endif // LED_MATRIX_CUSTOM_EFFECT_IMPLS -# endif // !defined(DISABLE_LED_MATRIX_SOLID_REACTIVE_CROSS) || !defined(DISABLE_LED_MATRIX_SOLID_REACTIVE_MULTICROSS) +# endif // defined(ENABLE_LED_MATRIX_SOLID_REACTIVE_CROSS) || defined(ENABLE_LED_MATRIX_SOLID_REACTIVE_MULTICROSS) #endif // LED_MATRIX_KEYREACTIVE_ENABLED diff --git a/quantum/led_matrix/animations/solid_reactive_nexus.h b/quantum/led_matrix/animations/solid_reactive_nexus.h index 2520b8e1df..5a86e48c6c 100644 --- a/quantum/led_matrix/animations/solid_reactive_nexus.h +++ b/quantum/led_matrix/animations/solid_reactive_nexus.h @@ -28,5 +28,5 @@ bool SOLID_REACTIVE_MULTINEXUS(effect_params_t* params) { return effect_runner_r # endif # endif // LED_MATRIX_CUSTOM_EFFECT_IMPLS -# endif // !defined(DISABLE_LED_MATRIX_SOLID_REACTIVE_NEXUS) || !defined(DISABLE_LED_MATRIX_SOLID_REACTIVE_MULTINEXUS) +# endif // defined(ENABLE_LED_MATRIX_SOLID_REACTIVE_NEXUS) || defined(ENABLE_LED_MATRIX_SOLID_REACTIVE_MULTINEXUS) #endif // LED_MATRIX_KEYREACTIVE_ENABLED diff --git a/quantum/led_matrix/animations/solid_reactive_simple_anim.h b/quantum/led_matrix/animations/solid_reactive_simple_anim.h index 43f6ad9ab4..14f5e90730 100644 --- a/quantum/led_matrix/animations/solid_reactive_simple_anim.h +++ b/quantum/led_matrix/animations/solid_reactive_simple_anim.h @@ -8,5 +8,5 @@ static uint8_t SOLID_REACTIVE_SIMPLE_math(uint8_t val, uint16_t offset) { return bool SOLID_REACTIVE_SIMPLE(effect_params_t* params) { return effect_runner_reactive(params, &SOLID_REACTIVE_SIMPLE_math); } # endif // LED_MATRIX_CUSTOM_EFFECT_IMPLS -# endif // DISABLE_LED_MATRIX_SOLID_REACTIVE_SIMPLE +# endif // ENABLE_LED_MATRIX_SOLID_REACTIVE_SIMPLE #endif // LED_MATRIX_KEYREACTIVE_ENABLED diff --git a/quantum/led_matrix/animations/solid_reactive_wide.h b/quantum/led_matrix/animations/solid_reactive_wide.h index d683b02510..3aa88063a7 100644 --- a/quantum/led_matrix/animations/solid_reactive_wide.h +++ b/quantum/led_matrix/animations/solid_reactive_wide.h @@ -1,5 +1,5 @@ #ifdef LED_MATRIX_KEYREACTIVE_ENABLED -# if !defined(DISABLE_LED_MATRIX_SOLID_REACTIVE_WIDE) || !defined(DISABLE_LED_MATRIX_SOLID_REACTIVE_MULTIWIDE) +# if !defined(ENABLE_LED_MATRIX_SOLID_REACTIVE_WIDE) || defined(ENABLE_LED_MATRIX_SOLID_REACTIVE_MULTIWIDE) # ifdef ENABLE_LED_MATRIX_SOLID_REACTIVE_WIDE LED_MATRIX_EFFECT(SOLID_REACTIVE_WIDE) @@ -26,5 +26,5 @@ bool SOLID_REACTIVE_MULTIWIDE(effect_params_t* params) { return effect_runner_re # endif # endif // LED_MATRIX_CUSTOM_EFFECT_IMPLS -# endif // !defined(DISABLE_LED_MATRIX_SOLID_REACTIVE_WIDE) || !defined(DISABLE_LED_MATRIX_SOLID_REACTIVE_MULTIWIDE) +# endif // !defined(ENABLE_LED_MATRIX_SOLID_REACTIVE_WIDE) || !defined(ENABLE_LED_MATRIX_SOLID_REACTIVE_MULTIWIDE) #endif // LED_MATRIX_KEYREACTIVE_ENABLED diff --git a/quantum/led_matrix/animations/solid_splash_anim.h b/quantum/led_matrix/animations/solid_splash_anim.h index cf599c8fe6..17b692a09a 100644 --- a/quantum/led_matrix/animations/solid_splash_anim.h +++ b/quantum/led_matrix/animations/solid_splash_anim.h @@ -1,5 +1,5 @@ #ifdef LED_MATRIX_KEYREACTIVE_ENABLED -# if !defined(DISABLE_LED_MATRIX_SOLID_SPLASH) || !defined(DISABLE_LED_MATRIX_SOLID_MULTISPLASH) +# if defined(ENABLE_LED_MATRIX_SOLID_SPLASH) || defined(ENABLE_LED_MATRIX_SOLID_MULTISPLASH) # ifdef ENABLE_LED_MATRIX_SOLID_SPLASH LED_MATRIX_EFFECT(SOLID_SPLASH) @@ -26,5 +26,5 @@ bool SOLID_MULTISPLASH(effect_params_t* params) { return effect_runner_reactive_ # endif # endif // LED_MATRIX_CUSTOM_EFFECT_IMPLS -# endif // !defined(DISABLE_LED_MATRIX_SPLASH) && !defined(DISABLE_LED_MATRIX_MULTISPLASH) +# endif // defined(ENABLE_LED_MATRIX_SPLASH) || defined(ENABLE_LED_MATRIX_MULTISPLASH) #endif // LED_MATRIX_KEYREACTIVE_ENABLED diff --git a/quantum/led_matrix/animations/wave_left_right_anim.h b/quantum/led_matrix/animations/wave_left_right_anim.h index c062cf968e..76487f8515 100644 --- a/quantum/led_matrix/animations/wave_left_right_anim.h +++ b/quantum/led_matrix/animations/wave_left_right_anim.h @@ -7,4 +7,4 @@ static uint8_t WAVE_LEFT_RIGHT_math(uint8_t val, uint8_t i, uint8_t time) { retu bool WAVE_LEFT_RIGHT(effect_params_t* params) { return effect_runner_i(params, &WAVE_LEFT_RIGHT_math); } # endif // LED_MATRIX_CUSTOM_EFFECT_IMPLS -#endif // DISABLE_LED_MATRIX_WAVE_LEFT_RIGHT +#endif // ENABLE_LED_MATRIX_WAVE_LEFT_RIGHT diff --git a/quantum/led_matrix/animations/wave_up_down_anim.h b/quantum/led_matrix/animations/wave_up_down_anim.h index 5e612f6b6d..94710f5c6e 100644 --- a/quantum/led_matrix/animations/wave_up_down_anim.h +++ b/quantum/led_matrix/animations/wave_up_down_anim.h @@ -7,4 +7,4 @@ static uint8_t WAVE_UP_DOWN_math(uint8_t val, uint8_t i, uint8_t time) { return bool WAVE_UP_DOWN(effect_params_t* params) { return effect_runner_i(params, &WAVE_UP_DOWN_math); } # endif // LED_MATRIX_CUSTOM_EFFECT_IMPLS -#endif // DISABLE_LED_MATRIX_WAVE_UP_DOWN +#endif // ENABLE_LED_MATRIX_WAVE_UP_DOWN diff --git a/quantum/led_matrix/led_matrix.c b/quantum/led_matrix/led_matrix.c index 8d6a56f27f..be1494e884 100644 --- a/quantum/led_matrix/led_matrix.c +++ b/quantum/led_matrix/led_matrix.c @@ -213,11 +213,11 @@ void process_led_matrix(uint8_t row, uint8_t col, bool pressed) { } #endif // LED_MATRIX_KEYREACTIVE_ENABLED -#if defined(LED_MATRIX_FRAMEBUFFER_EFFECTS) && !defined(DISABLE_LED_MATRIX_TYPING_HEATMAP) +#if defined(LED_MATRIX_FRAMEBUFFER_EFFECTS) && defined(ENABLE_LED_MATRIX_TYPING_HEATMAP) if (led_matrix_eeconfig.mode == LED_MATRIX_TYPING_HEATMAP) { process_led_matrix_typing_heatmap(row, col); } -#endif // defined(LED_MATRIX_FRAMEBUFFER_EFFECTS) && !defined(DISABLE_LED_MATRIX_TYPING_HEATMAP) +#endif // defined(LED_MATRIX_FRAMEBUFFER_EFFECTS) && defined(ENABLE_LED_MATRIX_TYPING_HEATMAP) } static bool led_matrix_none(effect_params_t *params) { diff --git a/quantum/led_matrix/led_matrix.h b/quantum/led_matrix/led_matrix.h index 5386744430..e42be64661 100644 --- a/quantum/led_matrix/led_matrix.h +++ b/quantum/led_matrix/led_matrix.h @@ -23,7 +23,6 @@ #include #include "led_matrix_types.h" #include "quantum.h" -#include "led_matrix_legacy_enables.h" #ifdef IS31FL3731 # include "is31fl3731-simple.h" diff --git a/quantum/led_matrix/led_matrix_legacy_enables.h b/quantum/led_matrix/led_matrix_legacy_enables.h deleted file mode 100644 index 7738d2f34e..0000000000 --- a/quantum/led_matrix/led_matrix_legacy_enables.h +++ /dev/null @@ -1,82 +0,0 @@ -/* Copyright 2021 QMK - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -// to-do: remove this - -#pragma once - -#ifndef DISABLE_LED_MATRIX_ALPHAS_MODS -# define ENABLE_LED_MATRIX_ALPHAS_MODS -#endif -#ifndef DISABLE_LED_MATRIX_BREATHING -# define ENABLE_LED_MATRIX_BREATHING -#endif -#ifndef DISABLE_LED_MATRIX_BAND -# define ENABLE_LED_MATRIX_BAND -#endif -#ifndef DISABLE_LED_MATRIX_BAND_PINWHEEL -# define ENABLE_LED_MATRIX_BAND_PINWHEEL -#endif -#ifndef DISABLE_LED_MATRIX_BAND_SPIRAL -# define ENABLE_LED_MATRIX_BAND_SPIRAL -#endif -#ifndef DISABLE_LED_MATRIX_CYCLE_LEFT_RIGHT -# define ENABLE_LED_MATRIX_CYCLE_LEFT_RIGHT -#endif -#ifndef DISABLE_LED_MATRIX_CYCLE_UP_DOWN -# define ENABLE_LED_MATRIX_CYCLE_UP_DOWN -#endif -#ifndef DISABLE_LED_MATRIX_CYCLE_OUT_IN -# define ENABLE_LED_MATRIX_CYCLE_OUT_IN -#endif -#ifndef DISABLE_LED_MATRIX_DUAL_BEACON -# define ENABLE_LED_MATRIX_DUAL_BEACON -#endif -#if defined(LED_MATRIX_KEYREACTIVE_ENABLED) -# ifndef DISABLE_LED_MATRIX_SOLID_REACTIVE_SIMPLE -# define ENABLE_LED_MATRIX_SOLID_REACTIVE_SIMPLE -# endif -# ifndef DISABLE_LED_MATRIX_SOLID_REACTIVE_WIDE -# define ENABLE_LED_MATRIX_SOLID_REACTIVE_WIDE -# endif -# ifndef DISABLE_LED_MATRIX_SOLID_REACTIVE_MULTIWIDE -# define ENABLE_LED_MATRIX_SOLID_REACTIVE_MULTIWIDE -# endif -# ifndef DISABLE_LED_MATRIX_SOLID_REACTIVE_CROSS -# define ENABLE_LED_MATRIX_SOLID_REACTIVE_CROSS -# endif -# ifndef DISABLE_LED_MATRIX_SOLID_REACTIVE_MULTICROSS -# define ENABLE_LED_MATRIX_SOLID_REACTIVE_MULTICROSS -# endif -# ifndef DISABLE_LED_MATRIX_SOLID_REACTIVE_NEXUS -# define ENABLE_LED_MATRIX_SOLID_REACTIVE_NEXUS -# endif -# ifndef DISABLE_LED_MATRIX_SOLID_REACTIVE_MULTINEXUS -# define ENABLE_LED_MATRIX_SOLID_REACTIVE_MULTINEXUS -# endif -# ifndef DISABLE_LED_MATRIX_SPLASH -# define ENABLE_LED_MATRIX_SPLASH -# endif -# ifndef DISABLE_LED_MATRIX_MULTISPLASH -# define ENABLE_LED_MATRIX_MULTISPLASH -# endif -#endif -#ifndef DISABLE_LED_MATRIX_WAVE_LEFT_RIGHT -# define ENABLE_LED_MATRIX_WAVE_LEFT_RIGHT -#endif -#ifndef DISABLE_LED_MATRIX_WAVE_UP_DOWN -# define ENABLE_LED_MATRIX_WAVE_UP_DOWN -#endif diff --git a/quantum/rgb_matrix/animations/alpha_mods_anim.h b/quantum/rgb_matrix/animations/alpha_mods_anim.h index b8f5072681..d6136f1ba4 100644 --- a/quantum/rgb_matrix/animations/alpha_mods_anim.h +++ b/quantum/rgb_matrix/animations/alpha_mods_anim.h @@ -23,4 +23,4 @@ bool ALPHAS_MODS(effect_params_t* params) { } # endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS -#endif // DISABLE_RGB_MATRIX_ALPHAS_MODS +#endif // ENABLE_RGB_MATRIX_ALPHAS_MODS diff --git a/quantum/rgb_matrix/animations/breathing_anim.h b/quantum/rgb_matrix/animations/breathing_anim.h index baac51ed15..29187e1543 100644 --- a/quantum/rgb_matrix/animations/breathing_anim.h +++ b/quantum/rgb_matrix/animations/breathing_anim.h @@ -17,4 +17,4 @@ bool BREATHING(effect_params_t* params) { } # endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS -#endif // DISABLE_RGB_MATRIX_BREATHING +#endif // ENABLE_RGB_MATRIX_BREATHING diff --git a/quantum/rgb_matrix/animations/colorband_pinwheel_sat_anim.h b/quantum/rgb_matrix/animations/colorband_pinwheel_sat_anim.h index ac95789228..0375d4937d 100644 --- a/quantum/rgb_matrix/animations/colorband_pinwheel_sat_anim.h +++ b/quantum/rgb_matrix/animations/colorband_pinwheel_sat_anim.h @@ -10,4 +10,4 @@ static HSV BAND_PINWHEEL_SAT_math(HSV hsv, int16_t dx, int16_t dy, uint8_t time) bool BAND_PINWHEEL_SAT(effect_params_t* params) { return effect_runner_dx_dy(params, &BAND_PINWHEEL_SAT_math); } # endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS -#endif // DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#endif // ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT diff --git a/quantum/rgb_matrix/animations/colorband_pinwheel_val_anim.h b/quantum/rgb_matrix/animations/colorband_pinwheel_val_anim.h index f7fe4b76e9..e40bf4cd1f 100644 --- a/quantum/rgb_matrix/animations/colorband_pinwheel_val_anim.h +++ b/quantum/rgb_matrix/animations/colorband_pinwheel_val_anim.h @@ -10,4 +10,4 @@ static HSV BAND_PINWHEEL_VAL_math(HSV hsv, int16_t dx, int16_t dy, uint8_t time) bool BAND_PINWHEEL_VAL(effect_params_t* params) { return effect_runner_dx_dy(params, &BAND_PINWHEEL_VAL_math); } # endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS -#endif // DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#endif // ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL diff --git a/quantum/rgb_matrix/animations/colorband_sat_anim.h b/quantum/rgb_matrix/animations/colorband_sat_anim.h index 96a6cbf5cd..1c4f7de575 100644 --- a/quantum/rgb_matrix/animations/colorband_sat_anim.h +++ b/quantum/rgb_matrix/animations/colorband_sat_anim.h @@ -11,4 +11,4 @@ static HSV BAND_SAT_math(HSV hsv, uint8_t i, uint8_t time) { bool BAND_SAT(effect_params_t* params) { return effect_runner_i(params, &BAND_SAT_math); } # endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS -#endif // DISABLE_RGB_MATRIX_BAND_SAT +#endif // ENABLE_RGB_MATRIX_BAND_SAT diff --git a/quantum/rgb_matrix/animations/colorband_spiral_sat_anim.h b/quantum/rgb_matrix/animations/colorband_spiral_sat_anim.h index 52f6040d81..cdd02b3797 100644 --- a/quantum/rgb_matrix/animations/colorband_spiral_sat_anim.h +++ b/quantum/rgb_matrix/animations/colorband_spiral_sat_anim.h @@ -10,4 +10,4 @@ static HSV BAND_SPIRAL_SAT_math(HSV hsv, int16_t dx, int16_t dy, uint8_t dist, u bool BAND_SPIRAL_SAT(effect_params_t* params) { return effect_runner_dx_dy_dist(params, &BAND_SPIRAL_SAT_math); } # endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS -#endif // DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#endif // ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT diff --git a/quantum/rgb_matrix/animations/colorband_spiral_val_anim.h b/quantum/rgb_matrix/animations/colorband_spiral_val_anim.h index d5752e27fb..e1331eaebe 100644 --- a/quantum/rgb_matrix/animations/colorband_spiral_val_anim.h +++ b/quantum/rgb_matrix/animations/colorband_spiral_val_anim.h @@ -10,4 +10,4 @@ static HSV BAND_SPIRAL_VAL_math(HSV hsv, int16_t dx, int16_t dy, uint8_t dist, u bool BAND_SPIRAL_VAL(effect_params_t* params) { return effect_runner_dx_dy_dist(params, &BAND_SPIRAL_VAL_math); } # endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS -#endif // DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#endif // ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL diff --git a/quantum/rgb_matrix/animations/colorband_val_anim.h b/quantum/rgb_matrix/animations/colorband_val_anim.h index 32bc6f52a5..02ee4add67 100644 --- a/quantum/rgb_matrix/animations/colorband_val_anim.h +++ b/quantum/rgb_matrix/animations/colorband_val_anim.h @@ -11,4 +11,4 @@ static HSV BAND_VAL_math(HSV hsv, uint8_t i, uint8_t time) { bool BAND_VAL(effect_params_t* params) { return effect_runner_i(params, &BAND_VAL_math); } # endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS -#endif // DISABLE_RGB_MATRIX_BAND_VAL +#endif // ENABLE_RGB_MATRIX_BAND_VAL diff --git a/quantum/rgb_matrix/animations/cycle_all_anim.h b/quantum/rgb_matrix/animations/cycle_all_anim.h index 20af94b6ba..3b73b9d385 100644 --- a/quantum/rgb_matrix/animations/cycle_all_anim.h +++ b/quantum/rgb_matrix/animations/cycle_all_anim.h @@ -10,4 +10,4 @@ static HSV CYCLE_ALL_math(HSV hsv, uint8_t i, uint8_t time) { bool CYCLE_ALL(effect_params_t* params) { return effect_runner_i(params, &CYCLE_ALL_math); } # endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS -#endif // DISABLE_RGB_MATRIX_CYCLE_ALL +#endif // ENABLE_RGB_MATRIX_CYCLE_ALL diff --git a/quantum/rgb_matrix/animations/cycle_left_right_anim.h b/quantum/rgb_matrix/animations/cycle_left_right_anim.h index 7f84f4bd59..bf6a574069 100644 --- a/quantum/rgb_matrix/animations/cycle_left_right_anim.h +++ b/quantum/rgb_matrix/animations/cycle_left_right_anim.h @@ -10,4 +10,4 @@ static HSV CYCLE_LEFT_RIGHT_math(HSV hsv, uint8_t i, uint8_t time) { bool CYCLE_LEFT_RIGHT(effect_params_t* params) { return effect_runner_i(params, &CYCLE_LEFT_RIGHT_math); } # endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS -#endif // DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#endif // ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT diff --git a/quantum/rgb_matrix/animations/cycle_out_in_anim.h b/quantum/rgb_matrix/animations/cycle_out_in_anim.h index 2277f16a2f..2bdb9d9375 100644 --- a/quantum/rgb_matrix/animations/cycle_out_in_anim.h +++ b/quantum/rgb_matrix/animations/cycle_out_in_anim.h @@ -10,4 +10,4 @@ static HSV CYCLE_OUT_IN_math(HSV hsv, int16_t dx, int16_t dy, uint8_t dist, uint bool CYCLE_OUT_IN(effect_params_t* params) { return effect_runner_dx_dy_dist(params, &CYCLE_OUT_IN_math); } # endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS -#endif // DISABLE_RGB_MATRIX_CYCLE_OUT_IN +#endif // ENABLE_RGB_MATRIX_CYCLE_OUT_IN diff --git a/quantum/rgb_matrix/animations/cycle_out_in_dual_anim.h b/quantum/rgb_matrix/animations/cycle_out_in_dual_anim.h index 981c0afd05..51979c44fe 100644 --- a/quantum/rgb_matrix/animations/cycle_out_in_dual_anim.h +++ b/quantum/rgb_matrix/animations/cycle_out_in_dual_anim.h @@ -12,4 +12,4 @@ static HSV CYCLE_OUT_IN_DUAL_math(HSV hsv, int16_t dx, int16_t dy, uint8_t time) bool CYCLE_OUT_IN_DUAL(effect_params_t* params) { return effect_runner_dx_dy(params, &CYCLE_OUT_IN_DUAL_math); } # endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS -#endif // DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#endif // ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL diff --git a/quantum/rgb_matrix/animations/cycle_pinwheel_anim.h b/quantum/rgb_matrix/animations/cycle_pinwheel_anim.h index 1a7db4a4c7..10ba2b7c2c 100644 --- a/quantum/rgb_matrix/animations/cycle_pinwheel_anim.h +++ b/quantum/rgb_matrix/animations/cycle_pinwheel_anim.h @@ -10,4 +10,4 @@ static HSV CYCLE_PINWHEEL_math(HSV hsv, int16_t dx, int16_t dy, uint8_t time) { bool CYCLE_PINWHEEL(effect_params_t* params) { return effect_runner_dx_dy(params, &CYCLE_PINWHEEL_math); } # endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS -#endif // DISABLE_RGB_MATRIX_CYCLE_PINWHEEL +#endif // ENABLE_RGB_MATRIX_CYCLE_PINWHEEL diff --git a/quantum/rgb_matrix/animations/cycle_spiral_anim.h b/quantum/rgb_matrix/animations/cycle_spiral_anim.h index 245cdc237f..482c7e7da6 100644 --- a/quantum/rgb_matrix/animations/cycle_spiral_anim.h +++ b/quantum/rgb_matrix/animations/cycle_spiral_anim.h @@ -10,4 +10,4 @@ static HSV CYCLE_SPIRAL_math(HSV hsv, int16_t dx, int16_t dy, uint8_t dist, uint bool CYCLE_SPIRAL(effect_params_t* params) { return effect_runner_dx_dy_dist(params, &CYCLE_SPIRAL_math); } # endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS -#endif // DISABLE_RGB_MATRIX_CYCLE_SPIRAL +#endif // ENABLE_RGB_MATRIX_CYCLE_SPIRAL diff --git a/quantum/rgb_matrix/animations/cycle_up_down_anim.h b/quantum/rgb_matrix/animations/cycle_up_down_anim.h index c9b5a54133..277edccb2f 100644 --- a/quantum/rgb_matrix/animations/cycle_up_down_anim.h +++ b/quantum/rgb_matrix/animations/cycle_up_down_anim.h @@ -10,4 +10,4 @@ static HSV CYCLE_UP_DOWN_math(HSV hsv, uint8_t i, uint8_t time) { bool CYCLE_UP_DOWN(effect_params_t* params) { return effect_runner_i(params, &CYCLE_UP_DOWN_math); } # endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS -#endif // DISABLE_RGB_MATRIX_CYCLE_UP_DOWN +#endif // ENABLE_RGB_MATRIX_CYCLE_UP_DOWN diff --git a/quantum/rgb_matrix/animations/digital_rain_anim.h b/quantum/rgb_matrix/animations/digital_rain_anim.h index 1de45f8e8d..8ce8fd7039 100644 --- a/quantum/rgb_matrix/animations/digital_rain_anim.h +++ b/quantum/rgb_matrix/animations/digital_rain_anim.h @@ -1,4 +1,4 @@ -#if defined(RGB_MATRIX_FRAMEBUFFER_EFFECTS) && !defined(DISABLE_RGB_MATRIX_DIGITAL_RAIN) +#if defined(RGB_MATRIX_FRAMEBUFFER_EFFECTS) && defined(ENABLE_RGB_MATRIX_DIGITAL_RAIN) RGB_MATRIX_EFFECT(DIGITAL_RAIN) # ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS @@ -72,4 +72,4 @@ bool DIGITAL_RAIN(effect_params_t* params) { } # endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS -#endif // defined(RGB_MATRIX_FRAMEBUFFER_EFFECTS) && !defined(DISABLE_RGB_MATRIX_DIGITAL_RAIN) +#endif // defined(RGB_MATRIX_FRAMEBUFFER_EFFECTS) && !defined(ENABLE_RGB_MATRIX_DIGITAL_RAIN) diff --git a/quantum/rgb_matrix/animations/dual_beacon_anim.h b/quantum/rgb_matrix/animations/dual_beacon_anim.h index 5c06080a26..dbe9b3ecf1 100644 --- a/quantum/rgb_matrix/animations/dual_beacon_anim.h +++ b/quantum/rgb_matrix/animations/dual_beacon_anim.h @@ -10,4 +10,4 @@ static HSV DUAL_BEACON_math(HSV hsv, int8_t sin, int8_t cos, uint8_t i, uint8_t bool DUAL_BEACON(effect_params_t* params) { return effect_runner_sin_cos_i(params, &DUAL_BEACON_math); } # endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS -#endif // DISABLE_RGB_MATRIX_DUAL_BEACON +#endif // ENABLE_RGB_MATRIX_DUAL_BEACON diff --git a/quantum/rgb_matrix/animations/gradient_left_right_anim.h b/quantum/rgb_matrix/animations/gradient_left_right_anim.h index 8b13d4e488..8bb5e570bd 100644 --- a/quantum/rgb_matrix/animations/gradient_left_right_anim.h +++ b/quantum/rgb_matrix/animations/gradient_left_right_anim.h @@ -19,4 +19,4 @@ bool GRADIENT_LEFT_RIGHT(effect_params_t* params) { } # endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS -#endif // DISABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#endif // ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT diff --git a/quantum/rgb_matrix/animations/gradient_up_down_anim.h b/quantum/rgb_matrix/animations/gradient_up_down_anim.h index 7431ddcd99..a5674583e3 100644 --- a/quantum/rgb_matrix/animations/gradient_up_down_anim.h +++ b/quantum/rgb_matrix/animations/gradient_up_down_anim.h @@ -19,4 +19,4 @@ bool GRADIENT_UP_DOWN(effect_params_t* params) { } # endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS -#endif // DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#endif // ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN diff --git a/quantum/rgb_matrix/animations/jellybean_raindrops_anim.h b/quantum/rgb_matrix/animations/jellybean_raindrops_anim.h index d639ba9b6c..3ffb57eb35 100644 --- a/quantum/rgb_matrix/animations/jellybean_raindrops_anim.h +++ b/quantum/rgb_matrix/animations/jellybean_raindrops_anim.h @@ -26,4 +26,4 @@ bool JELLYBEAN_RAINDROPS(effect_params_t* params) { } # endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS -#endif // DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#endif // ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS diff --git a/quantum/rgb_matrix/animations/rainbow_beacon_anim.h b/quantum/rgb_matrix/animations/rainbow_beacon_anim.h index b54d997f63..cd529958db 100644 --- a/quantum/rgb_matrix/animations/rainbow_beacon_anim.h +++ b/quantum/rgb_matrix/animations/rainbow_beacon_anim.h @@ -10,4 +10,4 @@ static HSV RAINBOW_BEACON_math(HSV hsv, int8_t sin, int8_t cos, uint8_t i, uint8 bool RAINBOW_BEACON(effect_params_t* params) { return effect_runner_sin_cos_i(params, &RAINBOW_BEACON_math); } # endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS -#endif // DISABLE_RGB_MATRIX_RAINBOW_BEACON +#endif // ENABLE_RGB_MATRIX_RAINBOW_BEACON diff --git a/quantum/rgb_matrix/animations/rainbow_moving_chevron_anim.h b/quantum/rgb_matrix/animations/rainbow_moving_chevron_anim.h index 50db922014..2f3de64e9d 100644 --- a/quantum/rgb_matrix/animations/rainbow_moving_chevron_anim.h +++ b/quantum/rgb_matrix/animations/rainbow_moving_chevron_anim.h @@ -10,4 +10,4 @@ static HSV RAINBOW_MOVING_CHEVRON_math(HSV hsv, uint8_t i, uint8_t time) { bool RAINBOW_MOVING_CHEVRON(effect_params_t* params) { return effect_runner_i(params, &RAINBOW_MOVING_CHEVRON_math); } # endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS -#endif // DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#endif // ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON diff --git a/quantum/rgb_matrix/animations/rainbow_pinwheels_anim.h b/quantum/rgb_matrix/animations/rainbow_pinwheels_anim.h index 3299f15df1..dae2b5d190 100644 --- a/quantum/rgb_matrix/animations/rainbow_pinwheels_anim.h +++ b/quantum/rgb_matrix/animations/rainbow_pinwheels_anim.h @@ -10,4 +10,4 @@ static HSV RAINBOW_PINWHEELS_math(HSV hsv, int8_t sin, int8_t cos, uint8_t i, ui bool RAINBOW_PINWHEELS(effect_params_t* params) { return effect_runner_sin_cos_i(params, &RAINBOW_PINWHEELS_math); } # endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS -#endif // DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#endif // ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS diff --git a/quantum/rgb_matrix/animations/raindrops_anim.h b/quantum/rgb_matrix/animations/raindrops_anim.h index fa61f9e0b9..4b1b9dd9ec 100644 --- a/quantum/rgb_matrix/animations/raindrops_anim.h +++ b/quantum/rgb_matrix/animations/raindrops_anim.h @@ -36,4 +36,4 @@ bool RAINDROPS(effect_params_t* params) { } # endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS -#endif // DISABLE_RGB_MATRIX_RAINDROPS +#endif // ENABLE_RGB_MATRIX_RAINDROPS diff --git a/quantum/rgb_matrix/animations/solid_reactive_anim.h b/quantum/rgb_matrix/animations/solid_reactive_anim.h index d45bb961bc..360d05a67a 100644 --- a/quantum/rgb_matrix/animations/solid_reactive_anim.h +++ b/quantum/rgb_matrix/animations/solid_reactive_anim.h @@ -1,5 +1,5 @@ #ifdef RGB_MATRIX_KEYREACTIVE_ENABLED -# ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE +# ifdef ENABLE_RGB_MATRIX_SOLID_REACTIVE RGB_MATRIX_EFFECT(SOLID_REACTIVE) # ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS @@ -11,5 +11,5 @@ static HSV SOLID_REACTIVE_math(HSV hsv, uint16_t offset) { bool SOLID_REACTIVE(effect_params_t* params) { return effect_runner_reactive(params, &SOLID_REACTIVE_math); } # endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS -# endif // DISABLE_RGB_MATRIX_SOLID_REACTIVE +# endif // ENABLE_RGB_MATRIX_SOLID_REACTIVE #endif // RGB_MATRIX_KEYREACTIVE_ENABLED diff --git a/quantum/rgb_matrix/animations/solid_reactive_cross.h b/quantum/rgb_matrix/animations/solid_reactive_cross.h index f76c68e8c7..496651f8a5 100644 --- a/quantum/rgb_matrix/animations/solid_reactive_cross.h +++ b/quantum/rgb_matrix/animations/solid_reactive_cross.h @@ -1,11 +1,11 @@ #ifdef RGB_MATRIX_KEYREACTIVE_ENABLED -# if !defined(DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS) || !defined(DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS) +# if defined(ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS) || defined(ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS) -# ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# ifdef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS RGB_MATRIX_EFFECT(SOLID_REACTIVE_CROSS) # endif -# ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# ifdef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS RGB_MATRIX_EFFECT(SOLID_REACTIVE_MULTICROSS) # endif @@ -23,14 +23,14 @@ static HSV SOLID_REACTIVE_CROSS_math(HSV hsv, int16_t dx, int16_t dy, uint8_t di return hsv; } -# ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# ifdef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS bool SOLID_REACTIVE_CROSS(effect_params_t* params) { return effect_runner_reactive_splash(qsub8(g_last_hit_tracker.count, 1), params, &SOLID_REACTIVE_CROSS_math); } # endif -# ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# ifdef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS bool SOLID_REACTIVE_MULTICROSS(effect_params_t* params) { return effect_runner_reactive_splash(0, params, &SOLID_REACTIVE_CROSS_math); } # endif # endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS -# endif // !defined(DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS) || !defined(DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS) +# endif // !defined(ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS) || defined(ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS) #endif // RGB_MATRIX_KEYREACTIVE_ENABLED diff --git a/quantum/rgb_matrix/animations/solid_reactive_nexus.h b/quantum/rgb_matrix/animations/solid_reactive_nexus.h index 17f94e3c18..3562e74a72 100644 --- a/quantum/rgb_matrix/animations/solid_reactive_nexus.h +++ b/quantum/rgb_matrix/animations/solid_reactive_nexus.h @@ -1,11 +1,11 @@ #ifdef RGB_MATRIX_KEYREACTIVE_ENABLED -# if !defined(DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS) || !defined(DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS) +# if defined(ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS) || defined(ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS) -# ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# ifdef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS RGB_MATRIX_EFFECT(SOLID_REACTIVE_NEXUS) # endif -# ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# ifdef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS RGB_MATRIX_EFFECT(SOLID_REACTIVE_MULTINEXUS) # endif @@ -21,14 +21,14 @@ static HSV SOLID_REACTIVE_NEXUS_math(HSV hsv, int16_t dx, int16_t dy, uint8_t di return hsv; } -# ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# ifdef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS bool SOLID_REACTIVE_NEXUS(effect_params_t* params) { return effect_runner_reactive_splash(qsub8(g_last_hit_tracker.count, 1), params, &SOLID_REACTIVE_NEXUS_math); } # endif -# ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# ifdef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS bool SOLID_REACTIVE_MULTINEXUS(effect_params_t* params) { return effect_runner_reactive_splash(0, params, &SOLID_REACTIVE_NEXUS_math); } # endif # endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS -# endif // !defined(DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS) || !defined(DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS) +# endif // !defined(ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS) || !defined(ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS) #endif // RGB_MATRIX_KEYREACTIVE_ENABLED diff --git a/quantum/rgb_matrix/animations/solid_reactive_simple_anim.h b/quantum/rgb_matrix/animations/solid_reactive_simple_anim.h index 12eb248cc0..69189f636b 100644 --- a/quantum/rgb_matrix/animations/solid_reactive_simple_anim.h +++ b/quantum/rgb_matrix/animations/solid_reactive_simple_anim.h @@ -1,5 +1,5 @@ #ifdef RGB_MATRIX_KEYREACTIVE_ENABLED -# ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# ifdef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE RGB_MATRIX_EFFECT(SOLID_REACTIVE_SIMPLE) # ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS @@ -11,5 +11,5 @@ static HSV SOLID_REACTIVE_SIMPLE_math(HSV hsv, uint16_t offset) { bool SOLID_REACTIVE_SIMPLE(effect_params_t* params) { return effect_runner_reactive(params, &SOLID_REACTIVE_SIMPLE_math); } # endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS -# endif // DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# endif // ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE #endif // RGB_MATRIX_KEYREACTIVE_ENABLED diff --git a/quantum/rgb_matrix/animations/solid_reactive_wide.h b/quantum/rgb_matrix/animations/solid_reactive_wide.h index 1cc4dca728..a613c7ff5f 100644 --- a/quantum/rgb_matrix/animations/solid_reactive_wide.h +++ b/quantum/rgb_matrix/animations/solid_reactive_wide.h @@ -1,11 +1,11 @@ #ifdef RGB_MATRIX_KEYREACTIVE_ENABLED -# if !defined(DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE) || !defined(DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE) +# if defined(ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE) || defined(ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE) -# ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# ifdef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE RGB_MATRIX_EFFECT(SOLID_REACTIVE_WIDE) # endif -# ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# ifdef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE RGB_MATRIX_EFFECT(SOLID_REACTIVE_MULTIWIDE) # endif @@ -18,14 +18,14 @@ static HSV SOLID_REACTIVE_WIDE_math(HSV hsv, int16_t dx, int16_t dy, uint8_t dis return hsv; } -# ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# ifdef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE bool SOLID_REACTIVE_WIDE(effect_params_t* params) { return effect_runner_reactive_splash(qsub8(g_last_hit_tracker.count, 1), params, &SOLID_REACTIVE_WIDE_math); } # endif -# ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# ifdef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE bool SOLID_REACTIVE_MULTIWIDE(effect_params_t* params) { return effect_runner_reactive_splash(0, params, &SOLID_REACTIVE_WIDE_math); } # endif # endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS -# endif // !defined(DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE) || !defined(DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE) +# endif // !defined(ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE) || !defined(ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE) #endif // RGB_MATRIX_KEYREACTIVE_ENABLED diff --git a/quantum/rgb_matrix/animations/solid_splash_anim.h b/quantum/rgb_matrix/animations/solid_splash_anim.h index 99efb4996a..bd9c1cfe2b 100644 --- a/quantum/rgb_matrix/animations/solid_splash_anim.h +++ b/quantum/rgb_matrix/animations/solid_splash_anim.h @@ -1,11 +1,11 @@ #ifdef RGB_MATRIX_KEYREACTIVE_ENABLED -# if !defined(DISABLE_RGB_MATRIX_SOLID_SPLASH) || !defined(DISABLE_RGB_MATRIX_SOLID_MULTISPLASH) +# if defined(ENABLE_RGB_MATRIX_SOLID_SPLASH) || defined(ENABLE_RGB_MATRIX_SOLID_MULTISPLASH) -# ifndef DISABLE_RGB_MATRIX_SOLID_SPLASH +# ifdef ENABLE_RGB_MATRIX_SOLID_SPLASH RGB_MATRIX_EFFECT(SOLID_SPLASH) # endif -# ifndef DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +# ifdef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH RGB_MATRIX_EFFECT(SOLID_MULTISPLASH) # endif @@ -18,14 +18,14 @@ HSV SOLID_SPLASH_math(HSV hsv, int16_t dx, int16_t dy, uint8_t dist, uint16_t ti return hsv; } -# ifndef DISABLE_RGB_MATRIX_SOLID_SPLASH +# ifdef ENABLE_RGB_MATRIX_SOLID_SPLASH bool SOLID_SPLASH(effect_params_t* params) { return effect_runner_reactive_splash(qsub8(g_last_hit_tracker.count, 1), params, &SOLID_SPLASH_math); } # endif -# ifndef DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +# ifdef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH bool SOLID_MULTISPLASH(effect_params_t* params) { return effect_runner_reactive_splash(0, params, &SOLID_SPLASH_math); } # endif # endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS -# endif // !defined(DISABLE_RGB_MATRIX_SPLASH) && !defined(DISABLE_RGB_MATRIX_MULTISPLASH) +# endif // !defined(ENABLE_RGB_MATRIX_SPLASH) && !defined(ENABLE_RGB_MATRIX_MULTISPLASH) #endif // RGB_MATRIX_KEYREACTIVE_ENABLED diff --git a/quantum/rgb_matrix/animations/splash_anim.h b/quantum/rgb_matrix/animations/splash_anim.h index 1415bcc0fa..382355e9ed 100644 --- a/quantum/rgb_matrix/animations/splash_anim.h +++ b/quantum/rgb_matrix/animations/splash_anim.h @@ -1,11 +1,11 @@ #ifdef RGB_MATRIX_KEYREACTIVE_ENABLED -# if !defined(DISABLE_RGB_MATRIX_SPLASH) || !defined(DISABLE_RGB_MATRIX_MULTISPLASH) +# if defined(ENABLE_RGB_MATRIX_SPLASH) || defined(ENABLE_RGB_MATRIX_MULTISPLASH) -# ifndef DISABLE_RGB_MATRIX_SPLASH +# ifdef ENABLE_RGB_MATRIX_SPLASH RGB_MATRIX_EFFECT(SPLASH) # endif -# ifndef DISABLE_RGB_MATRIX_MULTISPLASH +# ifdef ENABLE_RGB_MATRIX_MULTISPLASH RGB_MATRIX_EFFECT(MULTISPLASH) # endif @@ -19,14 +19,14 @@ HSV SPLASH_math(HSV hsv, int16_t dx, int16_t dy, uint8_t dist, uint16_t tick) { return hsv; } -# ifndef DISABLE_RGB_MATRIX_SPLASH +# ifdef ENABLE_RGB_MATRIX_SPLASH bool SPLASH(effect_params_t* params) { return effect_runner_reactive_splash(qsub8(g_last_hit_tracker.count, 1), params, &SPLASH_math); } # endif -# ifndef DISABLE_RGB_MATRIX_MULTISPLASH +# ifdef ENABLE_RGB_MATRIX_MULTISPLASH bool MULTISPLASH(effect_params_t* params) { return effect_runner_reactive_splash(0, params, &SPLASH_math); } # endif # endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS -# endif // !defined(DISABLE_RGB_MATRIX_SPLASH) || !defined(DISABLE_RGB_MATRIX_MULTISPLASH) +# endif // !defined(ENABLE_RGB_MATRIX_SPLASH) || !defined(ENABLE_RGB_MATRIX_MULTISPLASH) #endif // RGB_MATRIX_KEYREACTIVE_ENABLED diff --git a/quantum/rgb_matrix/animations/typing_heatmap_anim.h b/quantum/rgb_matrix/animations/typing_heatmap_anim.h index 28f040109d..b66667b9b8 100644 --- a/quantum/rgb_matrix/animations/typing_heatmap_anim.h +++ b/quantum/rgb_matrix/animations/typing_heatmap_anim.h @@ -83,4 +83,4 @@ bool TYPING_HEATMAP(effect_params_t* params) { } # endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS -#endif // defined(RGB_MATRIX_FRAMEBUFFER_EFFECTS) && !defined(DISABLE_RGB_MATRIX_TYPING_HEATMAP) +#endif // defined(RGB_MATRIX_FRAMEBUFFER_EFFECTS) && defined(ENABLE_RGB_MATRIX_TYPING_HEATMAP) diff --git a/quantum/rgb_matrix/rgb_matrix.h b/quantum/rgb_matrix/rgb_matrix.h index af5ca9e791..a804d99abc 100644 --- a/quantum/rgb_matrix/rgb_matrix.h +++ b/quantum/rgb_matrix/rgb_matrix.h @@ -23,7 +23,6 @@ #include "rgb_matrix_types.h" #include "color.h" #include "quantum.h" -#include "rgb_matrix_legacy_enables.h" #ifdef IS31FL3731 # include "is31fl3731.h" diff --git a/quantum/rgb_matrix/rgb_matrix_legacy_enables.h b/quantum/rgb_matrix/rgb_matrix_legacy_enables.h deleted file mode 100644 index 398858ebc8..0000000000 --- a/quantum/rgb_matrix/rgb_matrix_legacy_enables.h +++ /dev/null @@ -1,153 +0,0 @@ -/* Copyright 2021 QMK - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see . - */ - -// to-do: remove this - -#pragma once - -#ifndef DISABLE_RGB_MATRIX_ALPHAS_MODS -# define ENABLE_RGB_MATRIX_ALPHAS_MODS -#endif -#ifndef DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN -#endif -#ifndef DISABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT -# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT -#endif -#ifndef DISABLE_RGB_MATRIX_BREATHING -# define ENABLE_RGB_MATRIX_BREATHING -#endif -#ifndef DISABLE_RGB_MATRIX_BAND_SAT -# define ENABLE_RGB_MATRIX_BAND_SAT -#endif -#ifndef DISABLE_RGB_MATRIX_BAND_VAL -# define ENABLE_RGB_MATRIX_BAND_VAL -#endif -#ifndef DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -#endif -#ifndef DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -#endif -#ifndef DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT -#endif -#ifndef DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL -# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL -#endif -#ifndef DISABLE_RGB_MATRIX_CYCLE_ALL -# define ENABLE_RGB_MATRIX_CYCLE_ALL -#endif -#ifndef DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -#endif -#ifndef DISABLE_RGB_MATRIX_CYCLE_UP_DOWN -# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN -#endif -#ifndef DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -#endif -#ifndef DISABLE_RGB_MATRIX_CYCLE_OUT_IN -# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN -#endif -#ifndef DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -#endif -#ifndef DISABLE_RGB_MATRIX_CYCLE_PINWHEEL -# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL -#endif -#ifndef DISABLE_RGB_MATRIX_CYCLE_SPIRAL -# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL -#endif -#ifndef DISABLE_RGB_MATRIX_DUAL_BEACON -# define ENABLE_RGB_MATRIX_DUAL_BEACON -#endif -#ifndef DISABLE_RGB_MATRIX_RAINBOW_BEACON -# define ENABLE_RGB_MATRIX_RAINBOW_BEACON -#endif -#ifndef DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS -# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS -#endif -#ifndef DISABLE_RGB_MATRIX_RAINDROPS -# define ENABLE_RGB_MATRIX_RAINDROPS -#endif -#ifndef DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS -# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS -#endif -#ifndef DISABLE_RGB_MATRIX_HUE_BREATHING -# define ENABLE_RGB_MATRIX_HUE_BREATHING -#endif -#ifndef DISABLE_RGB_MATRIX_HUE_PENDULUM -# define ENABLE_RGB_MATRIX_HUE_PENDULUM -#endif -#ifndef DISABLE_RGB_MATRIX_HUE_WAVE -# define ENABLE_RGB_MATRIX_HUE_WAVE -#endif -#ifndef DISABLE_RGB_MATRIX_PIXEL_RAIN -# define ENABLE_RGB_MATRIX_PIXEL_RAIN -#endif -#ifndef DISABLE_RGB_MATRIX_PIXEL_FLOW -# define ENABLE_RGB_MATRIX_PIXEL_FLOW -#endif -#ifndef DISABLE_RGB_MATRIX_PIXEL_FRACTAL -# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL -#endif -#if defined(RGB_MATRIX_FRAMEBUFFER_EFFECTS) -# ifndef DISABLE_RGB_MATRIX_TYPING_HEATMAP -# define ENABLE_RGB_MATRIX_TYPING_HEATMAP -# endif -# ifndef DISABLE_RGB_MATRIX_DIGITAL_RAIN -# define ENABLE_RGB_MATRIX_DIGITAL_RAIN -# endif -#endif -#if defined(RGB_MATRIX_KEYREACTIVE_ENABLED) -# ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -# endif -# ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE -# endif -# ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -# endif -# ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -# endif -# ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -# endif -# ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -# endif -# ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -# endif -# ifndef DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -# endif -# ifndef DISABLE_RGB_MATRIX_SPLASH -# define ENABLE_RGB_MATRIX_SPLASH -# endif -# ifndef DISABLE_RGB_MATRIX_MULTISPLASH -# define ENABLE_RGB_MATRIX_MULTISPLASH -# endif -# ifndef DISABLE_RGB_MATRIX_SOLID_SPLASH -# define ENABLE_RGB_MATRIX_SOLID_SPLASH -# endif -# ifndef DISABLE_RGB_MATRIX_SOLID_MULTISPLASH -# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH -# endif -#endif diff --git a/users/curry/config.h b/users/curry/config.h index e3c0a103ef..31baea6257 100644 --- a/users/curry/config.h +++ b/users/curry/config.h @@ -19,42 +19,42 @@ # define RGB_MATRIX_FRAMEBUFFER_EFFECTS # define RGB_DISABLE_WHEN_USB_SUSPENDED -# define DISABLE_RGB_MATRIX_ALPHAS_MODS -# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -# define DISABLE_RGB_MATRIX_BREATHING -# define DISABLE_RGB_MATRIX_BAND_SAT -# define DISABLE_RGB_MATRIX_BAND_VAL -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL -# define DISABLE_RGB_MATRIX_CYCLE_ALL -# define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -# define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN -# define DISABLE_RGB_MATRIX_CYCLE_OUT_IN -// # define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -# define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -# define DISABLE_RGB_MATRIX_DUAL_BEACON -# define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL -# define DISABLE_RGB_MATRIX_CYCLE_SPIRAL -# define DISABLE_RGB_MATRIX_RAINBOW_BEACON -# define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS -# define DISABLE_RGB_MATRIX_RAINDROPS -# define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS -// # define DISABLE_RGB_MATRIX_TYPING_HEATMAP -# define DISABLE_RGB_MATRIX_DIGITAL_RAIN -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -# define DISABLE_RGB_MATRIX_SPLASH -# define DISABLE_RGB_MATRIX_MULTISPLASH -# define DISABLE_RGB_MATRIX_SOLID_SPLASH -# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +# undef ENABLE_RGB_MATRIX_ALPHAS_MODS +# undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# undef ENABLE_RGB_MATRIX_BREATHING +# undef ENABLE_RGB_MATRIX_BAND_SAT +# undef ENABLE_RGB_MATRIX_BAND_VAL +# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# undef ENABLE_RGB_MATRIX_CYCLE_ALL +# undef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# undef ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN +// # undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# undef ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# undef ENABLE_RGB_MATRIX_DUAL_BEACON +# undef ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# undef ENABLE_RGB_MATRIX_RAINBOW_BEACON +# undef ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# undef ENABLE_RGB_MATRIX_RAINDROPS +# undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +// # undef ENABLE_RGB_MATRIX_TYPING_HEATMAP +# undef ENABLE_RGB_MATRIX_DIGITAL_RAIN +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# undef ENABLE_RGB_MATRIX_SPLASH +# undef ENABLE_RGB_MATRIX_MULTISPLASH +# undef ENABLE_RGB_MATRIX_SOLID_SPLASH +# undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #endif // RGB_MATRIX_ENABLE #if !defined(ONESHOT_TAP_TOGGLE) diff --git a/users/drashna/config.h b/users/drashna/config.h index f54da9e328..32667d49a1 100644 --- a/users/drashna/config.h +++ b/users/drashna/config.h @@ -83,54 +83,103 @@ // # define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects // # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended -# if defined(__AVR__) && !defined(__AVR_AT90USB1286__) && !defined(KEYBOARD_launchpad) -# define DISABLE_RGB_MATRIX_ALPHAS_MODS -# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -# define DISABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT -# define DISABLE_RGB_MATRIX_BREATHING -# define DISABLE_RGB_MATRIX_BAND_SAT -# define DISABLE_RGB_MATRIX_BAND_VAL -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL -# define DISABLE_RGB_MATRIX_CYCLE_ALL -# define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -# define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN -# if defined(SPLIT_KEYBOARD) || defined(KEYBOARD_ergodox_ez) || defined(KEYBOARD_moonlander) -# define DISABLE_RGB_MATRIX_CYCLE_OUT_IN -// # define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -# endif -# define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -# define DISABLE_RGB_MATRIX_DUAL_BEACON -# define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL -# define DISABLE_RGB_MATRIX_CYCLE_SPIRAL -# define DISABLE_RGB_MATRIX_RAINBOW_BEACON -# define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS -# define DISABLE_RGB_MATRIX_RAINDROPS -# define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS -# define DISABLE_RGB_MATRIX_HUE_BREATHING -# define DISABLE_RGB_MATRIX_HUE_PENDULUM -# define DISABLE_RGB_MATRIX_HUE_WAVE -# define DISABLE_RGB_MATRIX_PIXEL_RAIN -# define DISABLE_RGB_MATRIX_PIXEL_FLOW -# define DISABLE_RGB_MATRIX_PIXEL_FRACTAL -// # define DISABLE_RGB_MATRIX_TYPING_HEATMAP -# define DISABLE_RGB_MATRIX_DIGITAL_RAIN -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -# define DISABLE_RGB_MATRIX_SPLASH -# define DISABLE_RGB_MATRIX_MULTISPLASH -# define DISABLE_RGB_MATRIX_SOLID_SPLASH -# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +# undef ENABLE_RGB_MATRIX_ALPHAS_MODS +# undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# undef ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# undef ENABLE_RGB_MATRIX_BREATHING +# undef ENABLE_RGB_MATRIX_BAND_SAT +# undef ENABLE_RGB_MATRIX_BAND_VAL +# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# undef ENABLE_RGB_MATRIX_CYCLE_ALL +# undef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# undef ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# undef ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# undef ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# undef ENABLE_RGB_MATRIX_DUAL_BEACON +# undef ENABLE_RGB_MATRIX_RAINBOW_BEACON +# undef ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# undef ENABLE_RGB_MATRIX_RAINDROPS +# undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# undef ENABLE_RGB_MATRIX_HUE_BREATHING +# undef ENABLE_RGB_MATRIX_HUE_PENDULUM +# undef ENABLE_RGB_MATRIX_HUE_WAVE +# undef ENABLE_RGB_MATRIX_PIXEL_RAIN +# undef ENABLE_RGB_MATRIX_PIXEL_FLOW +# undef ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined +# undef ENABLE_RGB_MATRIX_TYPING_HEATMAP +# undef ENABLE_RGB_MATRIX_DIGITAL_RAIN +// enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# undef ENABLE_RGB_MATRIX_SPLASH +# undef ENABLE_RGB_MATRIX_MULTISPLASH +# undef ENABLE_RGB_MATRIX_SOLID_SPLASH +# undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# if !defined(SPLIT_KEYBOARD) && !defined(KEYBOARD_ergodox_ez) && !defined(KEYBOARD_moonlander) +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# endif +# if defined(__arm__) || defined(__AVR_AT90USB1286__) || defined(KEYBOARD_launchpad) +// RGB Matrix Animation modes. Explicitly enabled +// For full list of effects, see: +// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH # endif // AVR -#endif // RGB_MATRIX_ENABLE +#endif // RGB_MATRIX_ENABLE #ifdef OLED_ENABLE # ifdef SPLIT_KEYBOARD diff --git a/users/dshields/config.h b/users/dshields/config.h index aa10814763..9a722b89e6 100644 --- a/users/dshields/config.h +++ b/users/dshields/config.h @@ -14,44 +14,44 @@ #define MOUSEKEY_MAX_SPEED 7 #define MOUSEKEY_WHEEL_DELAY 0 -#define DISABLE_RGB_MATRIX_ALPHAS_MODS -#define DISABLE_RGB_MATRIX_BREATHING -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -#define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -#define DISABLE_RGB_MATRIX_BAND_SAT -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -#define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL -#define DISABLE_RGB_MATRIX_BAND_VAL -#define DISABLE_RGB_MATRIX_CYCLE_ALL -#define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN -#define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -#define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL -#define DISABLE_RGB_MATRIX_CYCLE_SPIRAL -#define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN -#define DISABLE_RGB_MATRIX_DUAL_BEACON -#define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS -#define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -#define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -#define DISABLE_RGB_MATRIX_SOLID_SPLASH -#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH -#define DISABLE_RGB_MATRIX_SOLID_SPLASH -#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH -#define DISABLE_RGB_MATRIX_SPLASH -#define DISABLE_RGB_MATRIX_MULTISPLASH -#define DISABLE_RGB_MATRIX_SPLASH -#define DISABLE_RGB_MATRIX_MULTISPLASH +#undef ENABLE_RGB_MATRIX_ALPHAS_MODS +#undef ENABLE_RGB_MATRIX_BREATHING +#undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#undef ENABLE_RGB_MATRIX_BAND_SAT +#undef ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#undef ENABLE_RGB_MATRIX_BAND_VAL +#undef ENABLE_RGB_MATRIX_CYCLE_ALL +#undef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#undef ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#undef ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#undef ENABLE_RGB_MATRIX_DUAL_BEACON +#undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#undef ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#undef ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#undef ENABLE_RGB_MATRIX_SOLID_SPLASH +#undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH +#undef ENABLE_RGB_MATRIX_SOLID_SPLASH +#undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH +#undef ENABLE_RGB_MATRIX_SPLASH +#undef ENABLE_RGB_MATRIX_MULTISPLASH +#undef ENABLE_RGB_MATRIX_SPLASH +#undef ENABLE_RGB_MATRIX_MULTISPLASH diff --git a/users/tominabox1/config.h b/users/tominabox1/config.h index 004f58ab53..4a2433eb0b 100644 --- a/users/tominabox1/config.h +++ b/users/tominabox1/config.h @@ -41,33 +41,33 @@ #define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_LEFT_RIGHT /* Disable the animations you don't want/need. You will need to disable a good number of these because they take up a lot of space. Disable until you can successfully compile your firmware. */ - // #define DISABLE_RGB_MATRIX_ALPHAS_MODS - // #define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN - #define DISABLE_RGB_MATRIX_BREATHING - // #define DISABLE_RGB_MATRIX_CYCLE_ALL - // #define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT - // #define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN - // #define DISABLE_RGB_MATRIX_CYCLE_OUT_IN - // #define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL - #define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON - #define DISABLE_RGB_MATRIX_DUAL_BEACON - #define DISABLE_RGB_MATRIX_RAINBOW_BEACON - #define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS - // #define DISABLE_RGB_MATRIX_RAINDROPS - #define DISABLE_RGB_MATRIX_JELLYBEN_RAINDROPS - // # define DISABLE_RGB_MATRIX_TYPING_HEATMAP - #define DISABLE_RGB_MATRIX_DIGITAL_RAIN - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE - // #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE - // #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS - // #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS - #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS - #define DISABLE_RGB_MATRIX_SPLASH - #define DISABLE_RGB_MATRIX_MULTISPLASH - #define DISABLE_RGB_MATRIX_SOLID_SPLASH - #define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +// #undef ENABLE_RGB_MATRIX_ALPHAS_MODS +// #undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# undef ENABLE_RGB_MATRIX_BREATHING +// #undef ENABLE_RGB_MATRIX_CYCLE_ALL +// #undef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +// #undef ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +// #undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN +// #undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# undef ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# undef ENABLE_RGB_MATRIX_DUAL_BEACON +# undef ENABLE_RGB_MATRIX_RAINBOW_BEACON +# undef ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +// #undef ENABLE_RGB_MATRIX_RAINDROPS +# undef ENABLE_RGB_MATRIX_JELLYBEN_RAINDROPS +// # undef ENABLE_RGB_MATRIX_TYPING_HEATMAP +# undef ENABLE_RGB_MATRIX_DIGITAL_RAIN +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +// #undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# undef ENABLE_RGB_MATRIX_SPLASH +# undef ENABLE_RGB_MATRIX_MULTISPLASH +# undef ENABLE_RGB_MATRIX_SOLID_SPLASH +# undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH #endif //RGB_MATRIX_ENABLE // Hex size reduction options diff --git a/users/xulkal/config.h b/users/xulkal/config.h index e000b97acd..88e3efbe72 100644 --- a/users/xulkal/config.h +++ b/users/xulkal/config.h @@ -24,11 +24,11 @@ #endif // No need for the single versions when multi performance isn't a problem =D -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -#define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -#define DISABLE_RGB_MATRIX_SPLASH -#define DISABLE_RGB_MATRIX_SOLID_SPLASH +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#undef ENABLE_RGB_MATRIX_SPLASH +#undef ENABLE_RGB_MATRIX_SOLID_SPLASH // 20m timeout (20m * 60s * 1000mil) #define RGB_DISABLE_TIMEOUT 1200000 From 0db70f1f2a397e1e8a298f8add9a47dca09c7c55 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Mon, 15 Nov 2021 18:41:44 +0000 Subject: [PATCH 491/595] kb_elmo/m0116_usb: Fix Configurator Key Sequence (#15147) * friendly-format info.json * fix info.json key sequence --- keyboards/kb_elmo/m0116_usb/info.json | 167 +++++++++++++------------- 1 file changed, 86 insertions(+), 81 deletions(-) diff --git a/keyboards/kb_elmo/m0116_usb/info.json b/keyboards/kb_elmo/m0116_usb/info.json index 7804bac46b..9a5386b838 100644 --- a/keyboards/kb_elmo/m0116_usb/info.json +++ b/keyboards/kb_elmo/m0116_usb/info.json @@ -5,87 +5,92 @@ "layouts": { "LAYOUT": { "layout": [ - {"x":5, "y":0, "w":2}, - {"x":0, "y":1.15}, - {"x":1, "y":1.15}, - {"x":2, "y":1.15}, - {"x":3, "y":1.15}, - {"x":4, "y":1.15}, - {"x":5, "y":1.15}, - {"x":6, "y":1.15}, - {"x":7, "y":1.15}, - {"x":8, "y":1.15}, - {"x":9, "y":1.15}, - {"x":10, "y":1.15}, - {"x":11, "y":1.15}, - {"x":12, "y":1.15}, - {"x":13, "y":1.15, "w":1.5}, - {"x":15.25, "y":1.15}, - {"x":16.25, "y":1.15}, - {"x":17.25, "y":1.15}, - {"x":18.25, "y":1.15}, - {"x":0, "y":2.15, "w":1.5}, - {"x":1.5, "y":2.15}, - {"x":2.5, "y":2.15}, - {"x":3.5, "y":2.15}, - {"x":4.5, "y":2.15}, - {"x":5.5, "y":2.15}, - {"x":6.5, "y":2.15}, - {"x":7.5, "y":2.15}, - {"x":8.5, "y":2.15}, - {"x":9.5, "y":2.15}, - {"x":10.5, "y":2.15}, - {"x":11.5, "y":2.15}, - {"x":12.5, "y":2.15}, - {"x":15.25, "y":2.15}, - {"x":16.25, "y":2.15}, - {"x":17.25, "y":2.15}, - {"x":18.25, "y":2.15}, - {"x":0, "y":3.15, "w":1.75}, - {"x":1.75, "y":3.15}, - {"x":2.75, "y":3.15}, - {"x":3.75, "y":3.15}, - {"x":4.75, "y":3.15}, - {"x":5.75, "y":3.15}, - {"x":6.75, "y":3.15}, - {"x":7.75, "y":3.15}, - {"x":8.75, "y":3.15}, - {"x":9.75, "y":3.15}, - {"x":10.75, "y":3.15}, - {"x":11.75, "y":3.15}, - {"x":13.5, "y":2.15, "h":2}, - {"x":15.25, "y":3.15}, - {"x":16.25, "y":3.15}, - {"x":17.25, "y":3.15}, - {"x":18.25, "y":3.15}, - {"x":0, "y":4.15, "w":2.25}, - {"x":2.25, "y":4.15}, - {"x":3.25, "y":4.15}, - {"x":4.25, "y":4.15}, - {"x":5.25, "y":4.15}, - {"x":6.25, "y":4.15}, - {"x":7.25, "y":4.15}, - {"x":8.25, "y":4.15}, - {"x":9.25, "y":4.15}, - {"x":10.25, "y":4.15}, - {"x":11.25, "y":4.15}, - {"x":12.25, "y":4.15, "w":2.25}, - {"x":15.25, "y":4.15}, - {"x":16.25, "y":4.15}, - {"x":17.25, "y":4.15}, - {"x":18.25, "y":4.15, "h":2}, - {"x":0, "y":5.15}, - {"x":1, "y":5.15}, - {"x":2, "y":5.15, "w":1.75}, - {"x":3.75, "y":5.15}, - {"x":4.75, "y":5.15, "w":4.75}, - {"x":9.5, "y":5.15}, - {"x":10.5, "y":5.15}, - {"x":11.5, "y":5.15}, - {"x":12.5, "y":5.15}, - {"x":13.5, "y":5.15}, - {"x":15.25, "y":5.15, "w":2}, - {"x":17.25, "y":5.15} + {"label":"Print Screen", "x":5, "y":0, "w":2}, + + {"label":"Esc", "x":0, "y":1.15}, + {"label":"1!", "x":1, "y":1.15}, + {"label":"2@", "x":2, "y":1.15}, + {"label":"3#", "x":3, "y":1.15}, + {"label":"4$", "x":4, "y":1.15}, + {"label":"5%", "x":5, "y":1.15}, + {"label":"6^", "x":6, "y":1.15}, + {"label":"7&", "x":7, "y":1.15}, + {"label":"8*", "x":8, "y":1.15}, + {"label":"9(", "x":9, "y":1.15}, + {"label":"0)", "x":10, "y":1.15}, + {"label":"-_", "x":11, "y":1.15}, + {"label":"=+", "x":12, "y":1.15}, + {"label":"Backspace", "x":13, "y":1.15, "w":1.5}, + {"label":"Delete", "x":15.25, "y":1.15}, + {"label":"=+", "x":16.25, "y":1.15}, + {"label":"/", "x":17.25, "y":1.15}, + {"label":"*", "x":18.25, "y":1.15}, + + {"label":"Tab", "x":0, "y":2.15, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.15}, + {"label":"W", "x":2.5, "y":2.15}, + {"label":"E", "x":3.5, "y":2.15}, + {"label":"R", "x":4.5, "y":2.15}, + {"label":"T", "x":5.5, "y":2.15}, + {"label":"Y", "x":6.5, "y":2.15}, + {"label":"U", "x":7.5, "y":2.15}, + {"label":"I", "x":8.5, "y":2.15}, + {"label":"O", "x":9.5, "y":2.15}, + {"label":"P", "x":10.5, "y":2.15}, + {"label":"[{", "x":11.5, "y":2.15}, + {"label":"]}", "x":12.5, "y":2.15}, + {"label":"7", "x":15.25, "y":2.15}, + {"label":"8", "x":16.25, "y":2.15}, + {"label":"9", "x":17.25, "y":2.15}, + {"label":"+", "x":18.25, "y":2.15}, + + {"label":"Ctrl", "x":0, "y":3.15, "w":1.75}, + {"label":"A", "x":1.75, "y":3.15}, + {"label":"S", "x":2.75, "y":3.15}, + {"label":"D", "x":3.75, "y":3.15}, + {"label":"F", "x":4.75, "y":3.15}, + {"label":"G", "x":5.75, "y":3.15}, + {"label":"H", "x":6.75, "y":3.15}, + {"label":"J", "x":7.75, "y":3.15}, + {"label":"K", "x":8.75, "y":3.15}, + {"label":"L", "x":9.75, "y":3.15}, + {"label":";:", "x":10.75, "y":3.15}, + {"label":"'\"", "x":11.75, "y":3.15}, + {"label":"Enter", "x":13.5, "y":2.15, "h":2}, + {"label":"4", "x":15.25, "y":3.15}, + {"label":"5", "x":16.25, "y":3.15}, + {"label":"6", "x":17.25, "y":3.15}, + {"label":"-", "x":18.25, "y":3.15}, + + {"label":"Shift", "x":0, "y":4.15, "w":2.25}, + {"label":"Z", "x":2.25, "y":4.15}, + {"label":"X", "x":3.25, "y":4.15}, + {"label":"C", "x":4.25, "y":4.15}, + {"label":"V", "x":5.25, "y":4.15}, + {"label":"B", "x":6.25, "y":4.15}, + {"label":"N", "x":7.25, "y":4.15}, + {"label":"M", "x":8.25, "y":4.15}, + {"label":",<", "x":9.25, "y":4.15}, + {"label":".>", "x":10.25, "y":4.15}, + {"label":"/?", "x":11.25, "y":4.15}, + {"label":"MO(1)", "x":12.25, "y":4.15, "w":2.25}, + {"label":"1", "x":15.25, "y":4.15}, + {"label":"2", "x":16.25, "y":4.15}, + {"label":"3", "x":17.25, "y":4.15}, + + {"label":"Caps Lock", "x":0, "y":5.15}, + {"label":"GUI", "x":1, "y":5.15}, + {"label":"Alt", "x":2, "y":5.15, "w":1.75}, + {"label":"`~", "x":3.75, "y":5.15}, + {"label":"Space", "x":4.75, "y":5.15, "w":4.75}, + {"label":"\\|", "x":9.5, "y":5.15}, + {"label":"Left", "x":10.5, "y":5.15}, + {"label":"Right", "x":11.5, "y":5.15}, + {"label":"Down", "x":12.5, "y":5.15}, + {"label":"Up", "x":13.5, "y":5.15}, + {"label":"0", "x":15.25, "y":5.15, "w":2}, + {"label":".", "x":17.25, "y":5.15}, + {"label":"Enter", "x":18.25, "y":4.15, "h":2} ] } } From ef529de10cf01b74c3af7566401e76953a845152 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Mon, 15 Nov 2021 13:29:10 -0800 Subject: [PATCH 492/595] Fix additional board sizes for RGB Matrix (#15170) --- keyboards/bandominedoni/config.h | 241 +++++++++++++------------------ keyboards/smallkeyboard/config.h | 2 +- keyboards/xbows/nature/config.h | 14 +- 3 files changed, 112 insertions(+), 145 deletions(-) diff --git a/keyboards/bandominedoni/config.h b/keyboards/bandominedoni/config.h index ee0de340a4..fcff40f35a 100644 --- a/keyboards/bandominedoni/config.h +++ b/keyboards/bandominedoni/config.h @@ -140,145 +140,112 @@ // # define REDUCE_RGB_MATRIX_EFFECTS_2 // # ifdef AUDIO_ENABLE -# ifdef CONSOLE_ENABLE -// # define DISABLE_RGB_MATRIX_SOLID_COLOR -# define DISABLE_RGB_MATRIX_ALPHAS_MODS -# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -# define DISABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT -# define DISABLE_RGB_MATRIX_BREATHING -# define DISABLE_RGB_MATRIX_BAND_SAT -# define DISABLE_RGB_MATRIX_BAND_VAL -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL -# define DISABLE_RGB_MATRIX_CYCLE_ALL -# define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -# define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN -# define DISABLE_RGB_MATRIX_CYCLE_OUT_IN -# define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -# define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -# define DISABLE_RGB_MATRIX_DUAL_BEACON -# define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL -# define DISABLE_RGB_MATRIX_CYCLE_SPIRAL -# define DISABLE_RGB_MATRIX_RAINBOW_BEACON -# define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS -# define DISABLE_RGB_MATRIX_RAINDROPS -# define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS -# define DISABLE_RGB_MATRIX_HUE_BREATHING -# define DISABLE_RGB_MATRIX_HUE_PENDULUM -# define DISABLE_RGB_MATRIX_HUE_WAVE -# define DISABLE_RGB_MATRIX_TYPING_HEATMAP -# define DISABLE_RGB_MATRIX_DIGITAL_RAIN -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -# define DISABLE_RGB_MATRIX_SPLASH -# define DISABLE_RGB_MATRIX_MULTISPLASH -# define DISABLE_RGB_MATRIX_SOLID_SPLASH -# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH -# else -# define DISABLE_RGB_MATRIX_SOLID_COLOR -# define DISABLE_RGB_MATRIX_ALPHAS_MODS -# define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -# define DISABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT -# define DISABLE_RGB_MATRIX_BREATHING -# define DISABLE_RGB_MATRIX_BAND_SAT -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -# define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -# define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS - -// RAINDROPS don't match well with layer LED indicator (oc) using rgb_matrix_set_color(). -# define DISABLE_RGB_MATRIX_RAINDROPS -# define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS -// Recommendend not to use then. - -# if defined(REDUCE_RGB_MATRIX_EFFECTS) || defined(VIA_ENABLE) +# ifdef CONSOLE_ENABLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# else +// #define ENABLE_RGB_MATRIX_ALPHAS_MODS +// #define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +// #define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +// #define ENABLE_RGB_MATRIX_BREATHING +// #define ENABLE_RGB_MATRIX_BAND_SAT +// #define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +// #define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +// #define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +// #define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +// #define ENABLE_RGB_MATRIX_RAINDROPS +// #define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_FRACTAL +# define ENABLE_RGB_MATRIX_PIXEL_RAIN + +# if !defined(REDUCE_RGB_MATRIX_EFFECTS) && !defined(VIA_ENABLE) // # ifdef REDUCE_RGB_MATRIX_EFFECTS -# define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -# define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL -# define DISABLE_RGB_MATRIX_CYCLE_OUT_IN -# define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -# define DISABLE_RGB_MATRIX_DUAL_BEACON -# define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL -# define DISABLE_RGB_MATRIX_CYCLE_SPIRAL -# endif - -# define DISABLE_RGB_MATRIX_HUE_BREATHING -# define DISABLE_RGB_MATRIX_HUE_PENDULUM -# define DISABLE_RGB_MATRIX_HUE_WAVE -# define DISABLE_RGB_MATRIX_TYPING_HEATMAP -# define DISABLE_RGB_MATRIX_DIGITAL_RAIN -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS - -# if defined(REDUCE_RGB_MATRIX_EFFECTS_2) || defined(VIA_ENABLE) +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# endif + +// #define ENABLE_RGB_MATRIX_HUE_BREATHING +// #define ENABLE_RGB_MATRIX_HUE_PENDULUM +// #define ENABLE_RGB_MATRIX_HUE_WAVE +// #define ENABLE_RGB_MATRIX_FRACTAL +// #define ENABLE_RGB_MATRIX_PIXEL_RAIN +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS + +# if !defined(REDUCE_RGB_MATRIX_EFFECTS_2) && !defined(VIA_ENABLE) // # ifdef REDUCE_RGB_MATRIX_EFFECTS_2 -# define DISABLE_RGB_MATRIX_BAND_VAL -# define DISABLE_RGB_MATRIX_CYCLE_ALL -# define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN -# define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -# define DISABLE_RGB_MATRIX_RAINBOW_BEACON -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -# define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -# define DISABLE_RGB_MATRIX_MULTISPLASH -# define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH -# endif -// # define DISABLE_RGB_MATRIX_SOLID_REACTIVE -# define DISABLE_RGB_MATRIX_SPLASH -# define DISABLE_RGB_MATRIX_SOLID_SPLASH -# endif // AUDIO_ENABLE - -// #define DISABLE_RGB_MATRIX_SOLID_COLOR -// #define DISABLE_RGB_MATRIX_ALPHAS_MODS -// #define DISABLE_RGB_MATRIX_GRADIENT_UP_DOWN -// #define DISABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT -// #define DISABLE_RGB_MATRIX_BREATHING -// #define DISABLE_RGB_MATRIX_BAND_SAT // white background ver. of _BAND_VAL -// #define DISABLE_RGB_MATRIX_BAND_VAL -// #define DISABLE_RGB_MATRIX_BAND_PINWHEEL_SAT -// #define DISABLE_RGB_MATRIX_BAND_PINWHEEL_VAL -// #define DISABLE_RGB_MATRIX_BAND_SPIRAL_SAT -// #define DISABLE_RGB_MATRIX_BAND_SPIRAL_VAL -// #define DISABLE_RGB_MATRIX_CYCLE_ALL -// #define DISABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT -// #define DISABLE_RGB_MATRIX_CYCLE_UP_DOWN -// #define DISABLE_RGB_MATRIX_CYCLE_OUT_IN -// #define DISABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL -// #define DISABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON -// #define DISABLE_RGB_MATRIX_DUAL_BEACON -// #define DISABLE_RGB_MATRIX_CYCLE_PINWHEEL -// #define DISABLE_RGB_MATRIX_CYCLE_SPIRAL -// #define DISABLE_RGB_MATRIX_RAINBOW_BEACON -// #define DISABLE_RGB_MATRIX_RAINBOW_PINWHEELS -// #define DISABLE_RGB_MATRIX_RAINDROPS -// #define DISABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS //White ver of above. -// #define DISABLE_RGB_MATRIX_HUE_BREATHING -// #define DISABLE_RGB_MATRIX_HUE_PENDULUM -// #define DISABLE_RGB_MATRIX_HUE_WAVE -// #define DISABLE_RGB_MATRIX_TYPING_HEATMAP -// #define DISABLE_RGB_MATRIX_DIGITAL_RAIN -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS -// #define DISABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS -// #define DISABLE_RGB_MATRIX_SPLASH -// #define DISABLE_RGB_MATRIX_MULTISPLASH -// #define DISABLE_RGB_MATRIX_SOLID_SPLASH -// #define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + +# endif +// #define ENABLE_RGB_MATRIX_SPLASH +// #define ENABLE_RGB_MATRIX_SOLID_SPLASH +# endif // AUDIO_ENABLE + +// #define ENABLE_RGB_MATRIX_ALPHAS_MODS +// #define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +// #define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +// #define ENABLE_RGB_MATRIX_BREATHING +// #define ENABLE_RGB_MATRIX_BAND_SAT +// #define ENABLE_RGB_MATRIX_BAND_VAL +// #define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +// #define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +// #define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +// #define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +// #define ENABLE_RGB_MATRIX_CYCLE_ALL +// #define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +// #define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +// #define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +// #define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +// #define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +// #define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +// #define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +// #define ENABLE_RGB_MATRIX_DUAL_BEACON +// #define ENABLE_RGB_MATRIX_RAINBOW_BEACON +// #define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +// #define ENABLE_RGB_MATRIX_RAINDROPS +// #define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +// #define ENABLE_RGB_MATRIX_HUE_BREATHING +// #define ENABLE_RGB_MATRIX_HUE_PENDULUM +// #define ENABLE_RGB_MATRIX_HUE_WAVE +// #define ENABLE_RGB_MATRIX_FRACTAL +// #define ENABLE_RGB_MATRIX_PIXEL_RAIN + +// #define ENABLE_RGB_MATRIX_TYPING_HEATMAP +// #define ENABLE_RGB_MATRIX_DIGITAL_RAIN + +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +// #define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +// #define ENABLE_RGB_MATRIX_SPLASH +// #define ENABLE_RGB_MATRIX_MULTISPLASH +// #define ENABLE_RGB_MATRIX_SOLID_SPLASH +// #define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + #endif // RGB_MATRIX_ENABLE /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ diff --git a/keyboards/smallkeyboard/config.h b/keyboards/smallkeyboard/config.h index 2b8050422c..0a7d06f39d 100644 --- a/keyboards/smallkeyboard/config.h +++ b/keyboards/smallkeyboard/config.h @@ -84,7 +84,7 @@ #define ENABLE_RGB_MATRIX_HUE_BREATHING #define ENABLE_RGB_MATRIX_HUE_PENDULUM #define ENABLE_RGB_MATRIX_HUE_WAVE -#define ENABLE_RGB_MATRIX_FRACTAL +// #define ENABLE_RGB_MATRIX_FRACTAL #define ENABLE_RGB_MATRIX_PIXEL_RAIN #define ENABLE_RGB_MATRIX_TYPING_HEATMAP diff --git a/keyboards/xbows/nature/config.h b/keyboards/xbows/nature/config.h index 6bf33d89a1..6858c6a072 100644 --- a/keyboards/xbows/nature/config.h +++ b/keyboards/xbows/nature/config.h @@ -64,7 +64,7 @@ # define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN # define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON # define ENABLE_RGB_MATRIX_CYCLE_OUT_IN -# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +// # define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL # define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL # define ENABLE_RGB_MATRIX_CYCLE_SPIRAL # define ENABLE_RGB_MATRIX_DUAL_BEACON @@ -72,12 +72,12 @@ # define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS # define ENABLE_RGB_MATRIX_RAINDROPS # define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS -# define ENABLE_RGB_MATRIX_HUE_BREATHING -# define ENABLE_RGB_MATRIX_HUE_PENDULUM -# define ENABLE_RGB_MATRIX_HUE_WAVE -# define ENABLE_RGB_MATRIX_PIXEL_RAIN -# define ENABLE_RGB_MATRIX_PIXEL_FLOW -# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// # define ENABLE_RGB_MATRIX_HUE_BREATHING +// # define ENABLE_RGB_MATRIX_HUE_PENDULUM +// # define ENABLE_RGB_MATRIX_HUE_WAVE +// # define ENABLE_RGB_MATRIX_PIXEL_RAIN +// # define ENABLE_RGB_MATRIX_PIXEL_FLOW +// # define ENABLE_RGB_MATRIX_PIXEL_FRACTAL // enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined # define ENABLE_RGB_MATRIX_TYPING_HEATMAP // # define ENABLE_RGB_MATRIX_DIGITAL_RAIN From 297e209a6e4216d8609b67b006eff81b3400eb58 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Mon, 15 Nov 2021 15:09:23 -0800 Subject: [PATCH 493/595] [Keyboard] Fix bandominedoni via keymap compilation (#15171) --- keyboards/bandominedoni/config.h | 1 + 1 file changed, 1 insertion(+) diff --git a/keyboards/bandominedoni/config.h b/keyboards/bandominedoni/config.h index fcff40f35a..629c6af884 100644 --- a/keyboards/bandominedoni/config.h +++ b/keyboards/bandominedoni/config.h @@ -197,6 +197,7 @@ # define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH # endif +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE // #define ENABLE_RGB_MATRIX_SPLASH // #define ENABLE_RGB_MATRIX_SOLID_SPLASH # endif // AUDIO_ENABLE From 269990ed95f80db2349661b2731b42501e3b2803 Mon Sep 17 00:00:00 2001 From: studiokestra <74369928+studiokestra@users.noreply.github.com> Date: Mon, 15 Nov 2021 16:44:17 -0700 Subject: [PATCH 494/595] [Keyboard] Add Bourgeau 75% PCB (#15072) Co-authored-by: Drashna Jaelre --- keyboards/studiokestra/bourgeau/bourgeau.c | 18 ++++ keyboards/studiokestra/bourgeau/bourgeau.h | 46 +++++++++ keyboards/studiokestra/bourgeau/config.h | 83 ++++++++++++++++ keyboards/studiokestra/bourgeau/info.json | 94 +++++++++++++++++++ .../bourgeau/keymaps/default/keymap.c | 43 +++++++++ .../bourgeau/keymaps/default/readme.md | 3 + .../bourgeau/keymaps/via/keymap.c | 54 +++++++++++ .../bourgeau/keymaps/via/readme.md | 3 + .../bourgeau/keymaps/via/rules.mk | 1 + keyboards/studiokestra/bourgeau/readme.md | 23 +++++ keyboards/studiokestra/bourgeau/rules.mk | 21 +++++ 11 files changed, 389 insertions(+) create mode 100644 keyboards/studiokestra/bourgeau/bourgeau.c create mode 100644 keyboards/studiokestra/bourgeau/bourgeau.h create mode 100644 keyboards/studiokestra/bourgeau/config.h create mode 100644 keyboards/studiokestra/bourgeau/info.json create mode 100644 keyboards/studiokestra/bourgeau/keymaps/default/keymap.c create mode 100644 keyboards/studiokestra/bourgeau/keymaps/default/readme.md create mode 100644 keyboards/studiokestra/bourgeau/keymaps/via/keymap.c create mode 100644 keyboards/studiokestra/bourgeau/keymaps/via/readme.md create mode 100644 keyboards/studiokestra/bourgeau/keymaps/via/rules.mk create mode 100644 keyboards/studiokestra/bourgeau/readme.md create mode 100644 keyboards/studiokestra/bourgeau/rules.mk diff --git a/keyboards/studiokestra/bourgeau/bourgeau.c b/keyboards/studiokestra/bourgeau/bourgeau.c new file mode 100644 index 0000000000..87368df509 --- /dev/null +++ b/keyboards/studiokestra/bourgeau/bourgeau.c @@ -0,0 +1,18 @@ +/* +Copyright 2021 Studio Kestra + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include "bourgeau.h" diff --git a/keyboards/studiokestra/bourgeau/bourgeau.h b/keyboards/studiokestra/bourgeau/bourgeau.h new file mode 100644 index 0000000000..32a848eca7 --- /dev/null +++ b/keyboards/studiokestra/bourgeau/bourgeau.h @@ -0,0 +1,46 @@ +/* +Copyright 2021 Studio Kestra + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "quantum.h" + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT_all( \ + K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K114, K115, \ + K200, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, \ + K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K314, K315, \ + K400, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K413, K414, K415, \ + K500, K501, K502, K506, K510, K512, K513, K514, K515 \ +) \ +{ \ + { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, KC_NO, K114, K115 }, \ + { K200, KC_NO, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215 }, \ + { K300, KC_NO, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, KC_NO, K314, K315 }, \ + { K400, KC_NO, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, KC_NO, K413, K414, K415 }, \ + { K500, K501, K502, KC_NO, KC_NO, KC_NO, K506, KC_NO, KC_NO, KC_NO, K510, KC_NO, K512, K513, K514, K515 } \ +} + diff --git a/keyboards/studiokestra/bourgeau/config.h b/keyboards/studiokestra/bourgeau/config.h new file mode 100644 index 0000000000..744149c34e --- /dev/null +++ b/keyboards/studiokestra/bourgeau/config.h @@ -0,0 +1,83 @@ +/* +Copyright 2021 Studio Kestra + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x7C10 +#define PRODUCT_ID 0x7501 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Studio Kestra +#define PRODUCT Bourgeau + +#define MATRIX_ROWS 6 +#define MATRIX_COLS 16 + +#define MATRIX_ROW_PINS { D4, D6, D7, D5, B1, F0 } +#define MATRIX_COL_PINS { E6, B0, D2, D1, D0, D3, B6, F1, F4, F5, F6, F7, C7, C6, B5, B4 } + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + + +#define RGB_DI_PIN B7 +#ifdef RGB_DI_PIN + #define RGBLED_NUM 24 + #define RGBLIGHT_HUE_STEP 8 + #define RGBLIGHT_SAT_STEP 8 + #define RGBLIGHT_VAL_STEP 8 + #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ + #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE +// /*== customize breathing effect ==*/ +// /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ + #define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +// /*==== use exp() and sin() ====*/ +// #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +// #define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +#define BOOTMAGIC_LITE_ROW 0 +#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/studiokestra/bourgeau/info.json b/keyboards/studiokestra/bourgeau/info.json new file mode 100644 index 0000000000..8fd62f6518 --- /dev/null +++ b/keyboards/studiokestra/bourgeau/info.json @@ -0,0 +1,94 @@ +{ + "keyboard_name": "Bourgeau", + "url": "https://studiokestra.ca/bourgeau/", + "maintainer": "Studio Kestra", + "layouts": { + "LAYOUT_all": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":1, "y":0}, + {"label":"F2", "x":2, "y":0}, + {"label":"F3", "x":3, "y":0}, + {"label":"F4", "x":4, "y":0}, + {"label":"F5", "x":5, "y":0}, + {"label":"F6", "x":6, "y":0}, + {"label":"F7", "x":7, "y":0}, + {"label":"F8", "x":8, "y":0}, + {"label":"F9", "x":9, "y":0}, + {"label":"F10", "x":10, "y":0}, + {"label":"F11", "x":11, "y":0}, + {"label":"F12", "x":12, "y":0}, + {"label":"PrtSc", "x":13, "y":0}, + {"label":"Insert", "x":14, "y":0}, + {"label":"Delete", "x":15, "y":0}, + {"label":"~", "x":0, "y":1}, + {"label":"!", "x":1, "y":1}, + {"label":"@", "x":2, "y":1}, + {"label":"#", "x":3, "y":1}, + {"label":"$", "x":4, "y":1}, + {"label":"%", "x":5, "y":1}, + {"label":"^", "x":6, "y":1}, + {"label":"&", "x":7, "y":1}, + {"label":"*", "x":8, "y":1}, + {"label":"(", "x":9, "y":1}, + {"label":")", "x":10, "y":1}, + {"label":"_", "x":11, "y":1}, + {"label":"+", "x":12, "y":1}, + {"label":"Backspace", "x":13, "y":1, "w":2}, + {"label":"Home", "x":15, "y":1}, + {"label":"Tab", "x":0, "y":2, "w":1.5}, + {"label":"Q", "x":1.5, "y":2}, + {"label":"W", "x":2.5, "y":2}, + {"label":"E", "x":3.5, "y":2}, + {"label":"R", "x":4.5, "y":2}, + {"label":"T", "x":5.5, "y":2}, + {"label":"Y", "x":6.5, "y":2}, + {"label":"U", "x":7.5, "y":2}, + {"label":"I", "x":8.5, "y":2}, + {"label":"O", "x":9.5, "y":2}, + {"label":"P", "x":10.5, "y":2}, + {"label":"{", "x":11.5, "y":2}, + {"label":"}", "x":12.5, "y":2}, + {"label":"|", "x":13.5, "y":2, "w":1.5}, + {"label":"PgUp", "x":15, "y":2}, + {"label":"Caps Lock", "x":0, "y":3, "w":1.75}, + {"label":"A", "x":1.75, "y":3}, + {"label":"S", "x":2.75, "y":3}, + {"label":"D", "x":3.75, "y":3}, + {"label":"F", "x":4.75, "y":3}, + {"label":"G", "x":5.75, "y":3}, + {"label":"H", "x":6.75, "y":3}, + {"label":"J", "x":7.75, "y":3}, + {"label":"K", "x":8.75, "y":3}, + {"label":"L", "x":9.75, "y":3}, + {"label":":", "x":10.75, "y":3}, + {"label":"\"", "x":11.75, "y":3}, + {"label":"Enter", "x":12.75, "y":3, "w":2.25}, + {"label":"PgDn", "x":15, "y":3}, + {"label":"Shift", "x":0, "y":4, "w":2.25}, + {"label":"Z", "x":2.25, "y":4}, + {"label":"X", "x":3.25, "y":4}, + {"label":"C", "x":4.25, "y":4}, + {"label":"V", "x":5.25, "y":4}, + {"label":"B", "x":6.25, "y":4}, + {"label":"N", "x":7.25, "y":4}, + {"label":"M", "x":8.25, "y":4}, + {"label":"<", "x":9.25, "y":4}, + {"label":">", "x":10.25, "y":4}, + {"label":"?", "x":11.25, "y":4}, + {"label":"Shift", "x":12.25, "y":4, "w":1.75}, + {"label":"\u2191", "x":14, "y":4}, + {"label":"End", "x":15, "y":4}, + {"label":"Ctrl", "x":0, "y":5, "w":1.25}, + {"label":"Win", "x":1.25, "y":5, "w":1.25}, + {"label":"Alt", "x":2.5, "y":5, "w":1.25}, + {"x":3.75, "y":5, "w":6.25}, + {"label":"Fn", "x":10, "y":5, "w":1.5}, + {"label":"Ctrl", "x":11.5, "y":5, "w":1.5}, + {"label":"\u2190", "x":13, "y":5}, + {"label":"\u2193", "x":14, "y":5}, + {"label":"\u2192", "x":15, "y":5} + ] + } + } +} diff --git a/keyboards/studiokestra/bourgeau/keymaps/default/keymap.c b/keyboards/studiokestra/bourgeau/keymaps/default/keymap.c new file mode 100644 index 0000000000..31d7d70a09 --- /dev/null +++ b/keyboards/studiokestra/bourgeau/keymaps/default/keymap.c @@ -0,0 +1,43 @@ +/* +Copyright 2021 Studio Kestra + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + +enum layer_names { + _BASE, + _FN +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_all( /* Base */ + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_INS, KC_DEL, + KC_GRAVE,KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT + ), + [_FN] = LAYOUT_all( /* FN */ + RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; + diff --git a/keyboards/studiokestra/bourgeau/keymaps/default/readme.md b/keyboards/studiokestra/bourgeau/keymaps/default/readme.md new file mode 100644 index 0000000000..cbed849589 --- /dev/null +++ b/keyboards/studiokestra/bourgeau/keymaps/default/readme.md @@ -0,0 +1,3 @@ +# The default keymap for Bourgeau + +Default key configuration. \ No newline at end of file diff --git a/keyboards/studiokestra/bourgeau/keymaps/via/keymap.c b/keyboards/studiokestra/bourgeau/keymaps/via/keymap.c new file mode 100644 index 0000000000..d0491c30a9 --- /dev/null +++ b/keyboards/studiokestra/bourgeau/keymaps/via/keymap.c @@ -0,0 +1,54 @@ +/* +Copyright 2021 Studio Kestra + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include QMK_KEYBOARD_H + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_INS, KC_DEL, + KC_GRAVE,KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT + ), + [1] = LAYOUT_all( /* FN */ + RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [2] = LAYOUT_all( /* Layer 3 */ + RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [3] = LAYOUT_all( /* Layer 3 */ + RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/studiokestra/bourgeau/keymaps/via/readme.md b/keyboards/studiokestra/bourgeau/keymaps/via/readme.md new file mode 100644 index 0000000000..bf2bc20a62 --- /dev/null +++ b/keyboards/studiokestra/bourgeau/keymaps/via/readme.md @@ -0,0 +1,3 @@ +# The via keymap for Bourgeau + +For via configurator use \ No newline at end of file diff --git a/keyboards/studiokestra/bourgeau/keymaps/via/rules.mk b/keyboards/studiokestra/bourgeau/keymaps/via/rules.mk new file mode 100644 index 0000000000..036bd6d1c3 --- /dev/null +++ b/keyboards/studiokestra/bourgeau/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes \ No newline at end of file diff --git a/keyboards/studiokestra/bourgeau/readme.md b/keyboards/studiokestra/bourgeau/readme.md new file mode 100644 index 0000000000..16f87618e0 --- /dev/null +++ b/keyboards/studiokestra/bourgeau/readme.md @@ -0,0 +1,23 @@ +# Bourgeau + +Compact 75% universal hotswap PCB with USB-C that supports a fixed 6.25U bottom row layout. + +* Keyboard Maintainer: [Studio Kestra](https://github.com/studiokestra/) +* Hardware Supported: PLA75 +* Hardware Availability: [RNDKBD.com](https://rndkbd.com/) + +## Bootload Sequence + +There are 3 ways to put the board in bootloader mode: + +- Hold the top-left key (typically `Esc`) while plugging in the USB cable, OR +- While the PCB is plugged into the PC, press the physical `RESET` button on the back of the board, OR +- With the default layout, toggle Layer 1 and press the `ESC` key. + +## Compiling Firmware + +Make example for this keyboard (after setting up your build environment): + + make studiokestra/bourgeau:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/studiokestra/bourgeau/rules.mk b/keyboards/studiokestra/bourgeau/rules.mk new file mode 100644 index 0000000000..0acd19e670 --- /dev/null +++ b/keyboards/studiokestra/bourgeau/rules.mk @@ -0,0 +1,21 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output From d3ae937b50df8d98deb3dc3b9f8aa1635eac1c8b Mon Sep 17 00:00:00 2001 From: Matthew Dias Date: Mon, 15 Nov 2021 18:29:19 -0600 Subject: [PATCH 495/595] [Keyboard] Add layout options, hotswap version to portal 66 (#14719) Co-authored-by: Drashna Jaelre --- keyboards/portal_66/hotswap/config.h | 109 ++++++++++++++++++ .../{portal_66.c => hotswap/hotswap.c} | 2 +- keyboards/portal_66/hotswap/hotswap.h | 33 ++++++ keyboards/portal_66/hotswap/info.json | 81 +++++++++++++ .../hotswap/keymaps/default/keymap.c | 38 ++++++ .../hotswap/keymaps/default/readme.md | 1 + .../portal_66/hotswap/keymaps/via/keymap.c | 54 +++++++++ .../{ => hotswap}/keymaps/via/rules.mk | 0 keyboards/portal_66/hotswap/readme.md | 18 +++ keyboards/portal_66/{ => hotswap}/rules.mk | 2 - keyboards/portal_66/{ => soldered}/config.h | 0 keyboards/portal_66/{ => soldered}/info.json | 36 +++--- .../{ => soldered}/keymaps/default/keymap.c | 4 +- .../{ => soldered}/keymaps/default/readme.md | 0 .../{ => soldered}/keymaps/via/keymap.c | 8 +- .../portal_66/soldered/keymaps/via/rules.mk | 1 + keyboards/portal_66/{ => soldered}/readme.md | 4 +- keyboards/portal_66/soldered/rules.mk | 21 ++++ keyboards/portal_66/soldered/soldered.c | 17 +++ .../{portal_66.h => soldered/soldered.h} | 28 ++--- 20 files changed, 413 insertions(+), 44 deletions(-) create mode 100644 keyboards/portal_66/hotswap/config.h rename keyboards/portal_66/{portal_66.c => hotswap/hotswap.c} (96%) create mode 100644 keyboards/portal_66/hotswap/hotswap.h create mode 100644 keyboards/portal_66/hotswap/info.json create mode 100644 keyboards/portal_66/hotswap/keymaps/default/keymap.c create mode 100644 keyboards/portal_66/hotswap/keymaps/default/readme.md create mode 100644 keyboards/portal_66/hotswap/keymaps/via/keymap.c rename keyboards/portal_66/{ => hotswap}/keymaps/via/rules.mk (100%) create mode 100644 keyboards/portal_66/hotswap/readme.md rename keyboards/portal_66/{ => hotswap}/rules.mk (97%) rename keyboards/portal_66/{ => soldered}/config.h (100%) rename keyboards/portal_66/{ => soldered}/info.json (92%) rename keyboards/portal_66/{ => soldered}/keymaps/default/keymap.c (94%) rename keyboards/portal_66/{ => soldered}/keymaps/default/readme.md (100%) rename keyboards/portal_66/{ => soldered}/keymaps/via/keymap.c (93%) create mode 100644 keyboards/portal_66/soldered/keymaps/via/rules.mk rename keyboards/portal_66/{ => soldered}/readme.md (87%) create mode 100644 keyboards/portal_66/soldered/rules.mk create mode 100644 keyboards/portal_66/soldered/soldered.c rename keyboards/portal_66/{portal_66.h => soldered/soldered.h} (88%) diff --git a/keyboards/portal_66/hotswap/config.h b/keyboards/portal_66/hotswap/config.h new file mode 100644 index 0000000000..db4c59bd44 --- /dev/null +++ b/keyboards/portal_66/hotswap/config.h @@ -0,0 +1,109 @@ +/* +Copyright 2021 Matthew Dias + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x504C +#define PRODUCT_ID 0x5067 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Parallel Limited +#define PRODUCT Portal 66 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 16 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { E6, B7, F7, F4, F5 } +#define MATRIX_COL_PINS { F6, B0, F1, C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, D1, D0 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/portal_66/portal_66.c b/keyboards/portal_66/hotswap/hotswap.c similarity index 96% rename from keyboards/portal_66/portal_66.c rename to keyboards/portal_66/hotswap/hotswap.c index a53989f948..4189a8a80c 100644 --- a/keyboards/portal_66/portal_66.c +++ b/keyboards/portal_66/hotswap/hotswap.c @@ -14,4 +14,4 @@ * along with this program. If not, see . */ -#include "portal_66.h" +#include "hotswap.h" diff --git a/keyboards/portal_66/hotswap/hotswap.h b/keyboards/portal_66/hotswap/hotswap.h new file mode 100644 index 0000000000..734184dd77 --- /dev/null +++ b/keyboards/portal_66/hotswap/hotswap.h @@ -0,0 +1,33 @@ +/* Copyright 2021 Matthew Dias + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +#define LAYOUT( \ + k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k014, k015, \ + k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, k115, \ + k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k213, k215, \ + k300, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, k315, \ + k400, k401, k402, k406, k409, k411, k412, k413, k415 \ +) { \ + { k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, KC_NO, k014, k015 }, \ + { k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, KC_NO, k115 }, \ + { k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, KC_NO, k213, KC_NO, k215 }, \ + { k300, KC_NO, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, KC_NO, k315 }, \ + { k400, k401, k402, KC_NO, KC_NO, KC_NO, k406, KC_NO, KC_NO, k409, KC_NO, k411, k412, k413, KC_NO, k415 } \ +} diff --git a/keyboards/portal_66/hotswap/info.json b/keyboards/portal_66/hotswap/info.json new file mode 100644 index 0000000000..e90bdd8813 --- /dev/null +++ b/keyboards/portal_66/hotswap/info.json @@ -0,0 +1,81 @@ +{ + "keyboard_name": "Portal 66 Hotswap", + "maintainer": "matthewdias", + "layouts": { + "LAYOUT": { + "layout": [ + { "x":0, "y":0 }, + { "x":1, "y":0 }, + { "x":2, "y":0 }, + { "x":3, "y":0 }, + { "x":4, "y":0 }, + { "x":5, "y":0 }, + { "x":6, "y":0 }, + { "x":7, "y":0 }, + { "x":8, "y":0 }, + { "x":9, "y":0 }, + { "x":10, "y":0 }, + { "x":11, "y":0 }, + { "x":12, "y":0 }, + { "x":13, "y":0, "w": 2 }, + { "x":15, "y":0 }, + + { "x":0, "y":1, "w":1.5 }, + { "x":1.5, "y":1 }, + { "x":2.5, "y":1 }, + { "x":3.5, "y":1 }, + { "x":4.5, "y":1 }, + { "x":5.5, "y":1 }, + { "x":6.5, "y":1 }, + { "x":7.5, "y":1 }, + { "x":8.5, "y":1 }, + { "x":9.5, "y":1 }, + { "x":10.5, "y":1 }, + { "x":11.5, "y":1 }, + { "x":12.5, "y":1 }, + { "x":13.5, "y":1, "w":1.5 }, + { "x":15, "y":1 }, + + { "x":0, "y":2, "w":1.75 }, + { "x":1.75, "y":2 }, + { "x":2.75, "y":2 }, + { "x":3.75, "y":2 }, + { "x":4.75, "y":2 }, + { "x":5.75, "y":2 }, + { "x":6.75, "y":2 }, + { "x":7.75, "y":2 }, + { "x":8.75, "y":2 }, + { "x":9.75, "y":2 }, + { "x":10.75, "y":2 }, + { "x":11.75, "y":2 }, + { "x":12.75, "y":2, "w":2.25 }, + { "x":15, "y":2 }, + + { "x":0, "y":3, "w":2.25 }, + { "x":2.25, "y":3 }, + { "x":3.25, "y":3 }, + { "x":4.25, "y":3 }, + { "x":5.25, "y":3 }, + { "x":6.25, "y":3 }, + { "x":7.25, "y":3 }, + { "x":8.25, "y":3 }, + { "x":9.25, "y":3 }, + { "x":10.25, "y":3 }, + { "x":11.25, "y":3 }, + { "x":12.25, "y":3, "w":1.75 }, + { "x":14, "y":3 }, + { "x":15, "y":3 }, + + { "x":0, "y":4, "w":1.25 }, + { "x":1.25, "y":4, "w":1.25 }, + { "x":2.5, "y":4, "w":1.25 }, + { "x":3.75, "y":4, "w":6.25 }, + { "x":10, "y":4, "w":1.25 }, + { "x":11.25, "y":4, "w":1.25 }, + { "x":13, "y":4 }, + { "x":14, "y":4 }, + { "x":15, "y":4 } + ] + } + } +} diff --git a/keyboards/portal_66/hotswap/keymaps/default/keymap.c b/keyboards/portal_66/hotswap/keymaps/default/keymap.c new file mode 100644 index 0000000000..a476f5984d --- /dev/null +++ b/keyboards/portal_66/hotswap/keymaps/default/keymap.c @@ -0,0 +1,38 @@ +/* Copyright 2021 Matthew Dias + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +enum layer_names { + _BASE, + _FN +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_END, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(_FN), KC_LEFT, KC_DOWN, KC_RGHT + ), + [_FN] = LAYOUT( + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/portal_66/hotswap/keymaps/default/readme.md b/keyboards/portal_66/hotswap/keymaps/default/readme.md new file mode 100644 index 0000000000..1a4e1624e3 --- /dev/null +++ b/keyboards/portal_66/hotswap/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for Portal 66 Hotswap diff --git a/keyboards/portal_66/hotswap/keymaps/via/keymap.c b/keyboards/portal_66/hotswap/keymaps/via/keymap.c new file mode 100644 index 0000000000..a89f1eee66 --- /dev/null +++ b/keyboards/portal_66/hotswap/keymaps/via/keymap.c @@ -0,0 +1,54 @@ +/* Copyright 2021 Matthew Dias + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +enum layer_names { + _L0, + _L1, + _L2, + _L3 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_L0] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_END, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(_L1), KC_LEFT, KC_DOWN, KC_RGHT + ), + [_L1] = LAYOUT( + RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [_L2] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [_L3] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/portal_66/keymaps/via/rules.mk b/keyboards/portal_66/hotswap/keymaps/via/rules.mk similarity index 100% rename from keyboards/portal_66/keymaps/via/rules.mk rename to keyboards/portal_66/hotswap/keymaps/via/rules.mk diff --git a/keyboards/portal_66/hotswap/readme.md b/keyboards/portal_66/hotswap/readme.md new file mode 100644 index 0000000000..91434a11c0 --- /dev/null +++ b/keyboards/portal_66/hotswap/readme.md @@ -0,0 +1,18 @@ +# Portal 66 + +A 65% keyboard + +* Keyboard Maintainer: matthewdias +* Hardware Supported: Portal 66 Hotswap + +To reset the keyboard into bootloader mode, press the reset switch on the underside. + +Make example for this keyboard (after setting up your build environment): + + make portal_66/hotswap:default + +Flashing example for this keyboard: + + make portal_66/hotswap:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/portal_66/rules.mk b/keyboards/portal_66/hotswap/rules.mk similarity index 97% rename from keyboards/portal_66/rules.mk rename to keyboards/portal_66/hotswap/rules.mk index a3cd44fa42..c79f74e34b 100644 --- a/keyboards/portal_66/rules.mk +++ b/keyboards/portal_66/hotswap/rules.mk @@ -19,5 +19,3 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output - -LAYOUTS = 65_ansi diff --git a/keyboards/portal_66/config.h b/keyboards/portal_66/soldered/config.h similarity index 100% rename from keyboards/portal_66/config.h rename to keyboards/portal_66/soldered/config.h diff --git a/keyboards/portal_66/info.json b/keyboards/portal_66/soldered/info.json similarity index 92% rename from keyboards/portal_66/info.json rename to keyboards/portal_66/soldered/info.json index 253e9dd7bb..730b5400ea 100644 --- a/keyboards/portal_66/info.json +++ b/keyboards/portal_66/soldered/info.json @@ -71,9 +71,8 @@ { "x":1.25, "y":4, "w":1.25 }, { "x":2.5, "y":4, "w":1.25 }, { "x":3.75, "y":4, "w":6.25 }, - { "x":10, "y":4 }, - { "x":11, "y":4 }, - { "x":12, "y":4 }, + { "x":10, "y":4, "w":1.25 }, + { "x":11.25, "y":4, "w":1.25 }, { "x":13, "y":4 }, { "x":14, "y":4 }, { "x":15, "y":4 } @@ -147,15 +146,14 @@ { "x":1.25, "y":4, "w":1.25 }, { "x":2.5, "y":4, "w":1.25 }, { "x":3.75, "y":4, "w":6.25 }, - { "x":10, "y":4 }, - { "x":11, "y":4 }, - { "x":12, "y":4 }, + { "x":10, "y":4, "w":1.25 }, + { "x":11.25, "y":4, "w":1.25 }, { "x":13, "y":4 }, { "x":14, "y":4 }, { "x":15, "y":4 } ] }, - "LAYOUT_65_ansi_split_bs_2_right_mods": { + "LAYOUT_65_tsangan_split_bs": { "layout": [ { "x":0, "y":0 }, { "x":1, "y":0 }, @@ -220,18 +218,17 @@ { "x":14, "y":3 }, { "x":15, "y":3 }, - { "x":0, "y":4, "w":1.25 }, - { "x":1.25, "y":4, "w":1.25 }, - { "x":2.5, "y":4, "w":1.25 }, - { "x":3.75, "y":4, "w":6.25 }, - { "x":10, "y":4, "w":1.5 }, - { "x":11.5, "y":4, "w":1.5 }, + { "x":0, "y":4, "w":1.5 }, + { "x":1.5, "y":4, "w":1 }, + { "x":2.5, "y":4, "w":1.5 }, + { "x":4, "y":4, "w":7 }, + { "x":11, "y":4, "w":1.5 }, { "x":13, "y":4 }, { "x":14, "y":4 }, { "x":15, "y":4 } ] }, - "LAYOUT_65_ansi_2_right_mods": { + "LAYOUT_65_iso": { "layout": [ { "x":0, "y":0 }, { "x":1, "y":0 }, @@ -262,7 +259,6 @@ { "x":10.5, "y":1 }, { "x":11.5, "y":1 }, { "x":12.5, "y":1 }, - { "x":13.5, "y":1, "w":1.5 }, { "x":15, "y":1 }, { "x":0, "y":2, "w":1.75 }, @@ -277,10 +273,12 @@ { "x":9.75, "y":2 }, { "x":10.75, "y":2 }, { "x":11.75, "y":2 }, - { "x":12.75, "y":2, "w":2.25 }, + { "x":12.75, "y":2 }, + { "x":13.75, "y":1, "w":1.25, "h":2 }, { "x":15, "y":2 }, - { "x":0, "y":3, "w":2.25 }, + { "x":0, "y":3, "w":1.25 }, + { "x":1.25, "y":3 }, { "x":2.25, "y":3 }, { "x":3.25, "y":3 }, { "x":4.25, "y":3 }, @@ -299,8 +297,8 @@ { "x":1.25, "y":4, "w":1.25 }, { "x":2.5, "y":4, "w":1.25 }, { "x":3.75, "y":4, "w":6.25 }, - { "x":10, "y":4, "w":1.5 }, - { "x":11.5, "y":4, "w":1.5 }, + { "x":10, "y":4, "w":1.25 }, + { "x":11.25, "y":4, "w":1.25 }, { "x":13, "y":4 }, { "x":14, "y":4 }, { "x":15, "y":4 } diff --git a/keyboards/portal_66/keymaps/default/keymap.c b/keyboards/portal_66/soldered/keymaps/default/keymap.c similarity index 94% rename from keyboards/portal_66/keymaps/default/keymap.c rename to keyboards/portal_66/soldered/keymaps/default/keymap.c index 0269d577bf..3260f412a2 100644 --- a/keyboards/portal_66/keymaps/default/keymap.c +++ b/keyboards/portal_66/soldered/keymaps/default/keymap.c @@ -26,13 +26,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_END, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(_FN), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(_FN), KC_LEFT, KC_DOWN, KC_RGHT ), [_FN] = LAYOUT_65_ansi_split_bs( RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + _______, _______, _______, _______, _______, _______, _______, _______, _______ ) }; diff --git a/keyboards/portal_66/keymaps/default/readme.md b/keyboards/portal_66/soldered/keymaps/default/readme.md similarity index 100% rename from keyboards/portal_66/keymaps/default/readme.md rename to keyboards/portal_66/soldered/keymaps/default/readme.md diff --git a/keyboards/portal_66/keymaps/via/keymap.c b/keyboards/portal_66/soldered/keymaps/via/keymap.c similarity index 93% rename from keyboards/portal_66/keymaps/via/keymap.c rename to keyboards/portal_66/soldered/keymaps/via/keymap.c index 59e038a541..7ea1f44b0b 100644 --- a/keyboards/portal_66/keymaps/via/keymap.c +++ b/keyboards/portal_66/soldered/keymaps/via/keymap.c @@ -28,27 +28,27 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_END, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(_L1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(_L1), KC_LEFT, KC_DOWN, KC_RGHT ), [_L1] = LAYOUT_65_ansi_split_bs( RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + _______, _______, _______, _______, _______, _______, _______, _______, _______ ), [_L2] = LAYOUT_65_ansi_split_bs( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + _______, _______, _______, _______, _______, _______, _______, _______, _______ ), [_L3] = LAYOUT_65_ansi_split_bs( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + _______, _______, _______, _______, _______, _______, _______, _______, _______ ) }; diff --git a/keyboards/portal_66/soldered/keymaps/via/rules.mk b/keyboards/portal_66/soldered/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/portal_66/soldered/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/portal_66/readme.md b/keyboards/portal_66/soldered/readme.md similarity index 87% rename from keyboards/portal_66/readme.md rename to keyboards/portal_66/soldered/readme.md index b87945af3b..d6906fbc34 100644 --- a/keyboards/portal_66/readme.md +++ b/keyboards/portal_66/soldered/readme.md @@ -9,10 +9,10 @@ To reset the keyboard into bootloader mode, press the reset switch on the unders Make example for this keyboard (after setting up your build environment): - make portal_66:default + make portal_66/soldered:default Flashing example for this keyboard: - make portal_66:default:flash + make portal_66/soldered:default:flash See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/portal_66/soldered/rules.mk b/keyboards/portal_66/soldered/rules.mk new file mode 100644 index 0000000000..9906266f48 --- /dev/null +++ b/keyboards/portal_66/soldered/rules.mk @@ -0,0 +1,21 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/portal_66/soldered/soldered.c b/keyboards/portal_66/soldered/soldered.c new file mode 100644 index 0000000000..a74cd21dea --- /dev/null +++ b/keyboards/portal_66/soldered/soldered.c @@ -0,0 +1,17 @@ +/* Copyright 2021 Matthew Dias + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "soldered.h" diff --git a/keyboards/portal_66/portal_66.h b/keyboards/portal_66/soldered/soldered.h similarity index 88% rename from keyboards/portal_66/portal_66.h rename to keyboards/portal_66/soldered/soldered.h index 5d3525ae45..9fde7850d7 100644 --- a/keyboards/portal_66/portal_66.h +++ b/keyboards/portal_66/soldered/soldered.h @@ -23,13 +23,13 @@ k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, k115, \ k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k213, k215, \ k300, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, k315, \ - k400, k401, k402, k406, k409, k410, k411, k412, k413, k415 \ + k400, k401, k402, k406, k409, k411, k412, k413, k415 \ ) { \ { k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k013, k014, k015 }, \ { k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, KC_NO, k115 }, \ { k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, KC_NO, k213, KC_NO, k215 }, \ { k300, KC_NO, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, KC_NO, k315 }, \ - { k400, k401, k402, KC_NO, KC_NO, KC_NO, k406, KC_NO, KC_NO, k409, k410, k411, k412, k413, KC_NO, k415 } \ + { k400, k401, k402, KC_NO, KC_NO, KC_NO, k406, KC_NO, KC_NO, k409, KC_NO, k411, k412, k413, KC_NO, k415 } \ } #define LAYOUT_65_ansi( \ @@ -37,39 +37,39 @@ k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, k115, \ k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k213, k215, \ k300, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, k315, \ - k400, k401, k402, k406, k409, k410, k411, k412, k413, k415 \ + k400, k401, k402, k406, k409, k411, k412, k413, k415 \ ) { \ { k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, KC_NO, k014, k015 }, \ { k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, KC_NO, k115 }, \ { k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, KC_NO, k213, KC_NO, k215 }, \ { k300, KC_NO, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, KC_NO, k315 }, \ - { k400, k401, k402, KC_NO, KC_NO, KC_NO, k406, KC_NO, KC_NO, k409, k410, k411, k412, k413, KC_NO, k415 } \ + { k400, k401, k402, KC_NO, KC_NO, KC_NO, k406, KC_NO, KC_NO, k409, KC_NO, k411, k412, k413, KC_NO, k415 } \ } -#define LAYOUT_65_ansi_split_bs_2_right_mods( \ +#define LAYOUT_65_tsangan_split_bs( \ k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k013, k014, k015, \ k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, k115, \ k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k213, k215, \ k300, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, k315, \ - k400, k401, k402, k406, k409, k411, k412, k413, k415 \ + k400, k401, k402, k406, k411, k412, k413, k415 \ ) { \ { k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k013, k014, k015 }, \ { k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, KC_NO, k115 }, \ { k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, KC_NO, k213, KC_NO, k215 }, \ { k300, KC_NO, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, KC_NO, k315 }, \ - { k400, k401, k402, KC_NO, KC_NO, KC_NO, k406, KC_NO, KC_NO, k409, KC_NO, k411, k412, k413, KC_NO, k415 } \ + { k400, k401, k402, KC_NO, KC_NO, KC_NO, k406, KC_NO, KC_NO, KC_NO, KC_NO, k411, k412, k413, KC_NO, k415 } \ } -#define LAYOUT_65_ansi_2_right_mods( \ +#define LAYOUT_65_iso( \ k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k014, k015, \ - k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, k115, \ - k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k213, k215, \ - k300, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, k315, \ + k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k115, \ + k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k212, k213, k215, \ + k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, k315, \ k400, k401, k402, k406, k409, k411, k412, k413, k415 \ ) { \ { k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, KC_NO, k014, k015 }, \ - { k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, KC_NO, k115 }, \ - { k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, KC_NO, k213, KC_NO, k215 }, \ - { k300, KC_NO, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, KC_NO, k315 }, \ + { k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, KC_NO, KC_NO, k115 }, \ + { k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k212, k213, KC_NO, k215 }, \ + { k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, KC_NO, k315 }, \ { k400, k401, k402, KC_NO, KC_NO, KC_NO, k406, KC_NO, KC_NO, k409, KC_NO, k411, k412, k413, KC_NO, k415 } \ } From 22eba600418696542a6b84125f4dff2f37638c1e Mon Sep 17 00:00:00 2001 From: Albert Y <76888457+filterpaper@users.noreply.github.com> Date: Tue, 16 Nov 2021 09:05:15 +0800 Subject: [PATCH 496/595] [Keyboard] Add macro3 PCB support (#15131) Co-authored-by: Joel Challis Co-authored-by: Drashna Jaelre Co-authored-by: Ryan Co-authored-by: filterpaper --- keyboards/macro3/config.h | 55 +++++++++++++++++++++++ keyboards/macro3/info.json | 20 +++++++++ keyboards/macro3/keymaps/default/keymap.c | 30 +++++++++++++ keyboards/macro3/macro3.c | 39 ++++++++++++++++ keyboards/macro3/macro3.h | 28 ++++++++++++ keyboards/macro3/readme.md | 26 +++++++++++ keyboards/macro3/rules.mk | 22 +++++++++ 7 files changed, 220 insertions(+) create mode 100644 keyboards/macro3/config.h create mode 100644 keyboards/macro3/info.json create mode 100644 keyboards/macro3/keymaps/default/keymap.c create mode 100644 keyboards/macro3/macro3.c create mode 100644 keyboards/macro3/macro3.h create mode 100644 keyboards/macro3/readme.md create mode 100644 keyboards/macro3/rules.mk diff --git a/keyboards/macro3/config.h b/keyboards/macro3/config.h new file mode 100644 index 0000000000..59f7a151c7 --- /dev/null +++ b/keyboards/macro3/config.h @@ -0,0 +1,55 @@ +/* Copyright 2020 David Philip Barr <@davidphilipbarr> + * Copyright 2021 @filterpaper + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xC88B +#define PRODUCT_ID 0x3388 +#define DEVICE_VER 0x0003 +#define MANUFACTURER DPB +#define PRODUCT Macro3 + +/* key matrix size */ +#define MATRIX_ROWS 2 +#define MATRIX_COLS 4 + +/* key matrix pins */ +#define DIRECT_PINS { \ + { D7, C6, D4, D1 }, \ + { B1, B4, B5, B3 } \ +} + +#define ENCODERS_PAD_A { D2, F7 } +#define ENCODERS_PAD_B { D3, F6 } + +#define UNUSED_PINS + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* Top right key */ +#define BOOTMAGIC_LITE_ROW 0 +#define BOOTMAGIC_LITE_COLUMN 3 + diff --git a/keyboards/macro3/info.json b/keyboards/macro3/info.json new file mode 100644 index 0000000000..b25779cb70 --- /dev/null +++ b/keyboards/macro3/info.json @@ -0,0 +1,20 @@ +{ + "keyboard_name": "Macro3", + "url": "https://github.com/davidphilipbarr/Macropads/tree/main/macro3", + "maintainer": "@davidphilipbarr", + "layouts": { + "LAYOUT": { + "layout": [ + {"x": 0, "y": 0}, + {"x": 1, "y": 0}, + {"x": 2, "y": 0}, + {"x": 3, "y": 0}, + + {"x": 0, "y": 1}, + {"x": 1, "y": 1}, + {"x": 2, "y": 1}, + {"x": 3, "y": 1}, + ] + } + } +} diff --git a/keyboards/macro3/keymaps/default/keymap.c b/keyboards/macro3/keymaps/default/keymap.c new file mode 100644 index 0000000000..ca4db51f3e --- /dev/null +++ b/keyboards/macro3/keymaps/default/keymap.c @@ -0,0 +1,30 @@ +/* Copyright 2020 David Philip Barr <@davidphilipbarr> + * Copyright 2021 @filterpaper + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( + KC_HOME, KC_MUTE, KC_MPLY, KC_MSEL, + KC_UNDO, KC_CUT, KC_COPY, LT(1,KC_PSTE) + ), + [1] = LAYOUT( + _______, _______, _______, _______, + RESET, _______, _______, _______ + ) +}; + diff --git a/keyboards/macro3/macro3.c b/keyboards/macro3/macro3.c new file mode 100644 index 0000000000..cc12c0268a --- /dev/null +++ b/keyboards/macro3/macro3.c @@ -0,0 +1,39 @@ +/* Copyright 2020 David Philip Barr <@davidphilipbarr> + * Copyright 2021 @filterpaper + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "macro3.h" + +#ifdef ENCODER_ENABLE +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + if (index == 1) { + if (clockwise) { + tap_code(KC_VOLD); + } else { + tap_code(KC_VOLU); + } + } else if (index == 0) { + if (clockwise) { + tap_code(KC_WH_D); + } else { + tap_code(KC_WH_U); + } + } + return true; +} +#endif + diff --git a/keyboards/macro3/macro3.h b/keyboards/macro3/macro3.h new file mode 100644 index 0000000000..12621d2c09 --- /dev/null +++ b/keyboards/macro3/macro3.h @@ -0,0 +1,28 @@ +/* Copyright 2020 David Philip Barr <@davidphilipbarr> + * Copyright 2021 @filterpaper + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "quantum.h" + +#define LAYOUT( \ + K00, K01, K02, K03, \ + K10, K11, K12, K13 \ +) \ +{ \ + { K00, K01, K02, K03 }, \ + { K10, K11, K12, K13 } \ +} + diff --git a/keyboards/macro3/readme.md b/keyboards/macro3/readme.md new file mode 100644 index 0000000000..66a142ecdf --- /dev/null +++ b/keyboards/macro3/readme.md @@ -0,0 +1,26 @@ +# Macro3 + +![Macro3](https://github.com/davidphilipbarr/Macropads/raw/main/macro3/IMG_20200703_170424.jpg) + +Macro3 is a low-profile macro pad with encoder support designed by [@davidphilipbarr](https://github.com/davidphilipbarr) using direct micro-controller pin wiring. + +## Keyboard Info + +* Keyboard Maintainer: [davidphilipbarr](https://github.com/davidphilipbarr) +* Hardware Supported: [Macro3](https://github.com/davidphilipbarr/Macropads/tree/main/macro3) +* Hardware Availability: order PCBs with gerber file from the repository + +Make example for this keyboard (after setting up your build environment): + + make macro3:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the top right key and plug in the controller. +* **Physical reset button**: Briefly press the reset button soldered on the PCB. +* **Keycode in layout**: Press the key mapped to `RESET` if it is configured. + diff --git a/keyboards/macro3/rules.mk b/keyboards/macro3/rules.mk new file mode 100644 index 0000000000..baba7d9d86 --- /dev/null +++ b/keyboards/macro3/rules.mk @@ -0,0 +1,22 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +ENCODER_ENABLE = yes From 557e5ddf99e95eee63f764f6dab05f94fa657c22 Mon Sep 17 00:00:00 2001 From: Albert Y <76888457+filterpaper@users.noreply.github.com> Date: Wed, 17 Nov 2021 03:14:57 +0800 Subject: [PATCH 497/595] Rename RGB fractal (#15174) Co-authored-by: filterpaper --- docs/feature_rgb_matrix.md | 4 ++-- .../animations/{fractal_anim.h => pixel_fractal_anim.h} | 8 ++++---- quantum/rgb_matrix/animations/rgb_matrix_effects.inc | 2 +- 3 files changed, 7 insertions(+), 7 deletions(-) rename quantum/rgb_matrix/animations/{fractal_anim.h => pixel_fractal_anim.h} (94%) diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md index 3e1d73de15..d3d740c1b9 100644 --- a/docs/feature_rgb_matrix.md +++ b/docs/feature_rgb_matrix.md @@ -453,7 +453,7 @@ enum rgb_matrix_effects { RGB_MATRIX_HUE_BREATHING, // Hue shifts up a slight ammount at the same time, then shifts back RGB_MATRIX_HUE_PENDULUM, // Hue shifts up a slight ammount in a wave to the right, then back to the left RGB_MATRIX_HUE_WAVE, // Hue shifts up a slight ammount and then back down in a wave to the right - RGB_MATRIX_FRACTAL, // Single hue fractal filled keys pulsing horizontally out to edges + RGB_MATRIX_PIXEL_FRACTAL, // Single hue fractal filled keys pulsing horizontally out to edges RGB_MATRIX_PIXEL_RAIN, // Randomly light keys with random hues #if define(RGB_MATRIX_FRAMEBUFFER_EFFECTS) RGB_MATRIX_TYPING_HEATMAP, // How hot is your WPM! @@ -508,7 +508,7 @@ You can enable a single effect by defining `ENABLE_[EFFECT_NAME]` in your `confi |`#define ENABLE_RGB_MATRIX_HUE_BREATHING` |Enables `RGB_MATRIX_HUE_BREATHING` | |`#define ENABLE_RGB_MATRIX_HUE_PENDULUM` |Enables `RGB_MATRIX_HUE_PENDULUM` | |`#define ENABLE_RGB_MATRIX_HUE_WAVE` |Enables `RGB_MATRIX_HUE_WAVE ` | -|`#define ENABLE_RGB_MATRIX_FRACTAL` |Enables `RGB_MATRIX_FRACTAL` | +|`#define ENABLE_RGB_MATRIX_PIXEL_FRACTAL` |Enables `RGB_MATRIX_PIXEL_FRACTAL` | |`#define ENABLE_RGB_MATRIX_PIXEL_RAIN` |Enables `RGB_MATRIX_PIXEL_RAIN` | ?> These modes don't require any additional defines. diff --git a/quantum/rgb_matrix/animations/fractal_anim.h b/quantum/rgb_matrix/animations/pixel_fractal_anim.h similarity index 94% rename from quantum/rgb_matrix/animations/fractal_anim.h rename to quantum/rgb_matrix/animations/pixel_fractal_anim.h index 83a69daa60..8e25ec402c 100644 --- a/quantum/rgb_matrix/animations/fractal_anim.h +++ b/quantum/rgb_matrix/animations/pixel_fractal_anim.h @@ -16,11 +16,11 @@ // Inspired from 4x12 fractal created by @schwarzgrau -#ifdef ENABLE_RGB_MATRIX_FRACTAL -RGB_MATRIX_EFFECT(FRACTAL) +#ifdef ENABLE_RGB_MATRIX_PIXEL_FRACTAL +RGB_MATRIX_EFFECT(PIXEL_FRACTAL) # ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS -static bool FRACTAL(effect_params_t* params) { +static bool PIXEL_FRACTAL(effect_params_t* params) { # define MID_COL MATRIX_COLS / 2 static bool led[MATRIX_ROWS][MATRIX_COLS]; @@ -71,4 +71,4 @@ static bool FRACTAL(effect_params_t* params) { return false; } # endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS -#endif // ENABLE_RGB_MATRIX_FRACTAL +#endif // ENABLE_RGB_MATRIX_PIXEL_FRACTAL diff --git a/quantum/rgb_matrix/animations/rgb_matrix_effects.inc b/quantum/rgb_matrix/animations/rgb_matrix_effects.inc index 8ecf4367ff..27ce347235 100644 --- a/quantum/rgb_matrix/animations/rgb_matrix_effects.inc +++ b/quantum/rgb_matrix/animations/rgb_matrix_effects.inc @@ -26,8 +26,8 @@ #include "hue_breathing_anim.h" #include "hue_pendulum_anim.h" #include "hue_wave_anim.h" -#include "fractal_anim.h" #include "pixel_rain_anim.h" +#include "pixel_fractal_anim.h" #include "typing_heatmap_anim.h" #include "digital_rain_anim.h" #include "solid_reactive_simple_anim.h" From bed4ab6f6fb0b5b111d9a82eb07b9dcdceea6a12 Mon Sep 17 00:00:00 2001 From: yiancar Date: Tue, 16 Nov 2021 19:15:35 +0000 Subject: [PATCH 498/595] [Keyboard] Emery65 (#15145) Co-authored-by: Drashna Jaelre Co-authored-by: yiancar --- keyboards/emery65/config.h | 80 +++++++++++++++++++++ keyboards/emery65/emery65.c | 21 ++++++ keyboards/emery65/emery65.h | 34 +++++++++ keyboards/emery65/info.json | 10 +++ keyboards/emery65/keymaps/default/keymap.c | 32 +++++++++ keyboards/emery65/keymaps/default/readme.md | 5 ++ keyboards/emery65/keymaps/via/keymap.c | 46 ++++++++++++ keyboards/emery65/keymaps/via/readme.md | 5 ++ keyboards/emery65/keymaps/via/rules.mk | 1 + keyboards/emery65/readme.md | 32 +++++++++ keyboards/emery65/rules.mk | 29 ++++++++ 11 files changed, 295 insertions(+) create mode 100644 keyboards/emery65/config.h create mode 100644 keyboards/emery65/emery65.c create mode 100644 keyboards/emery65/emery65.h create mode 100644 keyboards/emery65/info.json create mode 100644 keyboards/emery65/keymaps/default/keymap.c create mode 100644 keyboards/emery65/keymaps/default/readme.md create mode 100644 keyboards/emery65/keymaps/via/keymap.c create mode 100644 keyboards/emery65/keymaps/via/readme.md create mode 100644 keyboards/emery65/keymaps/via/rules.mk create mode 100644 keyboards/emery65/readme.md create mode 100644 keyboards/emery65/rules.mk diff --git a/keyboards/emery65/config.h b/keyboards/emery65/config.h new file mode 100644 index 0000000000..cbe31b75da --- /dev/null +++ b/keyboards/emery65/config.h @@ -0,0 +1,80 @@ +/* +Copyright 2021 Yiancar-Designs + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published byß +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x8968 +#define PRODUCT_ID 0x4536 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Yiancar-Designs +#define PRODUCT Emery65 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +#define MATRIX_ROW_PINS { A2, B9, B8, B5, B4 } +#define MATRIX_COL_PINS { A1, B1, B0, A7, A6, A5, A4, A3, B2, B10, B11, B12, B13, B14, B15 } + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Ensure we jump to bootloader if the RESET keycode was pressed */ +#define EARLY_INIT_PERFORM_BOOTLOADER_JUMP TRUE + +/* Indicator LEDs */ +#define LED_CAPS_LOCK_PIN B6 +#define LED_PIN_ON_STATE 0 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* Bootmagic Lite key configuration */ +#define BOOTMAGIC_LITE_ROW 0 +#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/emery65/emery65.c b/keyboards/emery65/emery65.c new file mode 100644 index 0000000000..11cac7c462 --- /dev/null +++ b/keyboards/emery65/emery65.c @@ -0,0 +1,21 @@ +/* Copyright 2021 Yiancar-Designs + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + #include "emery65.h" + +void led_init_ports(void) { + // Set our LED pins as open drain outputs + palSetLineMode(LED_CAPS_LOCK_PIN, PAL_MODE_OUTPUT_OPENDRAIN); +} diff --git a/keyboards/emery65/emery65.h b/keyboards/emery65/emery65.h new file mode 100644 index 0000000000..5bffeaab81 --- /dev/null +++ b/keyboards/emery65/emery65.h @@ -0,0 +1,34 @@ +/* Copyright 2021 Yiancar-Designs + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#define XXX KC_NO + +#include "quantum.h" + +#define LAYOUT_all( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2C, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K2E, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K46, K4A, K4B, K4C, K4D, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E }, \ + { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, K41, K42, XXX, XXX, XXX, K46, XXX, XXX, XXX, K4A, K4B, K4C, K4D, K4E } \ +} diff --git a/keyboards/emery65/info.json b/keyboards/emery65/info.json new file mode 100644 index 0000000000..9d8058e831 --- /dev/null +++ b/keyboards/emery65/info.json @@ -0,0 +1,10 @@ +{ + "keyboard_name": "Emery65", + "url": "https://yiancar-designs.com", + "maintainer": "Yiancar-Designs", + "layouts": { + "LAYOUT_all": { + "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":15, "y":0}, {"x":0, "y":1, "w":1.5}, {"x":1.5, "y":1}, {"x":2.5, "y":1}, {"x":3.5, "y":1}, {"x":4.5, "y":1}, {"x":5.5, "y":1}, {"x":6.5, "y":1}, {"x":7.5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1, "w":1.5}, {"x":15, "y":1}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2}, {"x":11.75, "y":2}, {"x":12.75, "y":2, "w":2.25}, {"x":15, "y":2}, {"x":0, "y":3, "w":2.25}, {"x":2.25, "y":3}, {"x":3.25, "y":3}, {"x":4.25, "y":3}, {"x":5.25, "y":3}, {"x":6.25, "y":3}, {"x":7.25, "y":3}, {"x":8.25, "y":3}, {"x":9.25, "y":3}, {"x":10.25, "y":3}, {"x":11.25, "y":3}, {"x":12.25, "y":3, "w":1.75}, {"x":14, "y":3}, {"x":15, "y":3}, {"x":0, "y":4, "w":1.25}, {"x":1.25, "y":4, "w":1.25}, {"x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4, "w":6.25}, {"x":10, "y":4, "w":1.25}, {"x":11.25, "y":4, "w":1.25}, {"x":13, "y":4}, {"x":14, "y":4}, {"x":15, "y":4}] + } + } +} diff --git a/keyboards/emery65/keymaps/default/keymap.c b/keyboards/emery65/keymaps/default/keymap.c new file mode 100644 index 0000000000..332babc8c6 --- /dev/null +++ b/keyboards/emery65/keymaps/default/keymap.c @@ -0,0 +1,32 @@ +/* Copyright 2021 Yiancar-Designs + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT_all( /* Base */ + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RCTL, MO(1), KC_LEFT, KC_DOWN, KC_RGHT), + + [1] = LAYOUT_all( /* FN */ + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) +}; diff --git a/keyboards/emery65/keymaps/default/readme.md b/keyboards/emery65/keymaps/default/readme.md new file mode 100644 index 0000000000..25aae30244 --- /dev/null +++ b/keyboards/emery65/keymaps/default/readme.md @@ -0,0 +1,5 @@ +# The default keymap for Emery 65. + +![Layer 0](https://i.imgur.com/xiHQsWw.png) + +![Layer 1](https://i.imgur.com/l9qSeTv.png) diff --git a/keyboards/emery65/keymaps/via/keymap.c b/keyboards/emery65/keymaps/via/keymap.c new file mode 100644 index 0000000000..beeae2971b --- /dev/null +++ b/keyboards/emery65/keymaps/via/keymap.c @@ -0,0 +1,46 @@ +/* Copyright 2021 Yiancar-Designs + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT_all( /* Base */ + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, KC_HOME, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RCTL, MO(1), KC_LEFT, KC_DOWN, KC_RGHT), + +[1] = LAYOUT_all( /* FN */ + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_VOLU, KC_VOLD, KC_MUTE, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + +[2] = LAYOUT_all( /* Empty for dynamic keymaps */ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + +[3] = LAYOUT_all( /* Empty for dynamic keymaps */ + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) +}; diff --git a/keyboards/emery65/keymaps/via/readme.md b/keyboards/emery65/keymaps/via/readme.md new file mode 100644 index 0000000000..2e2bd04d19 --- /dev/null +++ b/keyboards/emery65/keymaps/via/readme.md @@ -0,0 +1,5 @@ +# The default keymap for Emery 65. VIA support enabled. + +![Layer 0](https://i.imgur.com/xiHQsWw.png) + +![Layer 1](https://i.imgur.com/l9qSeTv.png) \ No newline at end of file diff --git a/keyboards/emery65/keymaps/via/rules.mk b/keyboards/emery65/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/emery65/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/emery65/readme.md b/keyboards/emery65/readme.md new file mode 100644 index 0000000000..4450be1046 --- /dev/null +++ b/keyboards/emery65/readme.md @@ -0,0 +1,32 @@ +# Emery 65 + +This is a standard 65% layout PCB. It supports VIA. + +* Keyboard Maintainer: [Yiancar](http://yiancar-designs.com/) and on [GitHub](https://github.com/yiancar) +* Hardware Supported: A 65% keyboard with STM32F072CB +* Hardware Availability: https://geekhack.org/index.php?topic=112678.0 + +## Instructions + +### Build + +Make example for this keyboard (after setting up your build environment): + + make emery65:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +### Reset + +- Unplug +- Hold Escape +- Plug In +- Unplug +- Release Escape + +### Flash + +- Unplug +- Hold Escape +- Plug In +- Flash using QMK Toolbox or CLI (`make emery65::flash`) diff --git a/keyboards/emery65/rules.mk b/keyboards/emery65/rules.mk new file mode 100644 index 0000000000..853d4afb29 --- /dev/null +++ b/keyboards/emery65/rules.mk @@ -0,0 +1,29 @@ +# MCU name +MCU = STM32F072 + +# Bootloader selection +BOOTLOADER = stm32-dfu + +# Wildcard to allow APM32 MCU +DFU_SUFFIX_ARGS = -v FFFF -p FFFF + +# Do not put the microcontroller into power saving mode +# when we get USB suspend event. We want it to keep updating +# backlight effects. +OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output From 053a970cba9a69747c69943611c43d24a327ab23 Mon Sep 17 00:00:00 2001 From: Xelus22 <17491233+Xelus22@users.noreply.github.com> Date: Wed, 17 Nov 2021 06:16:06 +1100 Subject: [PATCH 499/595] [Keyboard] Add Pachi RGB Rev 2 (#15141) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- keyboards/xelus/pachi/readme.md | 3 +- keyboards/xelus/pachi/rgb/config.h | 61 +---- keyboards/xelus/pachi/rgb/rev1/config.h | 120 +++++++++ .../xelus/pachi/rgb/{ => rev1}/halconf.h | 0 .../xelus/pachi/rgb/{ => rev1}/mcuconf.h | 0 keyboards/xelus/pachi/rgb/rev1/readme.md | 17 ++ keyboards/xelus/pachi/rgb/rev1/rev1.c | 239 +++++++++++++++++ keyboards/xelus/pachi/rgb/rev1/rev1.h | 36 +++ keyboards/xelus/pachi/rgb/{ => rev1}/rules.mk | 0 keyboards/xelus/pachi/rgb/rev2/config.h | 121 +++++++++ keyboards/xelus/pachi/rgb/rev2/halconf.h | 27 ++ keyboards/xelus/pachi/rgb/rev2/mcuconf.h | 28 ++ keyboards/xelus/pachi/rgb/rev2/readme.md | 18 ++ keyboards/xelus/pachi/rgb/rev2/rev2.c | 245 ++++++++++++++++++ keyboards/xelus/pachi/rgb/rev2/rev2.h | 42 +++ keyboards/xelus/pachi/rgb/rev2/rules.mk | 31 +++ keyboards/xelus/pachi/rgb/rgb.c | 227 ---------------- keyboards/xelus/pachi/rgb/rgb.h | 22 +- 18 files changed, 932 insertions(+), 305 deletions(-) create mode 100644 keyboards/xelus/pachi/rgb/rev1/config.h rename keyboards/xelus/pachi/rgb/{ => rev1}/halconf.h (100%) rename keyboards/xelus/pachi/rgb/{ => rev1}/mcuconf.h (100%) create mode 100644 keyboards/xelus/pachi/rgb/rev1/readme.md create mode 100644 keyboards/xelus/pachi/rgb/rev1/rev1.c create mode 100644 keyboards/xelus/pachi/rgb/rev1/rev1.h rename keyboards/xelus/pachi/rgb/{ => rev1}/rules.mk (100%) create mode 100644 keyboards/xelus/pachi/rgb/rev2/config.h create mode 100644 keyboards/xelus/pachi/rgb/rev2/halconf.h create mode 100644 keyboards/xelus/pachi/rgb/rev2/mcuconf.h create mode 100644 keyboards/xelus/pachi/rgb/rev2/readme.md create mode 100644 keyboards/xelus/pachi/rgb/rev2/rev2.c create mode 100644 keyboards/xelus/pachi/rgb/rev2/rev2.h create mode 100644 keyboards/xelus/pachi/rgb/rev2/rules.mk diff --git a/keyboards/xelus/pachi/readme.md b/keyboards/xelus/pachi/readme.md index 4f40465672..d6a0aec88b 100644 --- a/keyboards/xelus/pachi/readme.md +++ b/keyboards/xelus/pachi/readme.md @@ -9,6 +9,7 @@ Make example for this keyboard (after setting up your build environment): make xelus/pachi/rev1:default make xelus/pachi/mini_32u4:default - make xelus/pachi/rgb:default + make xelus/pachi/rgb/rev1:default + make xelus/pachi/rgb/rev2:default See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/xelus/pachi/rgb/config.h b/keyboards/xelus/pachi/rgb/config.h index 9378b2c413..956d35d69b 100644 --- a/keyboards/xelus/pachi/rgb/config.h +++ b/keyboards/xelus/pachi/rgb/config.h @@ -14,63 +14,4 @@ * along with this program. If not, see . */ -#pragma once - -/* USB Device descriptor parameter */ -#define VENDOR_ID 0x5845 // "XE" -#define PRODUCT_ID 0x5052 // "PR" -#define DEVICE_VER 0x0001 -#define MANUFACTURER Xelus -#define PRODUCT Xelus Pachi RGB - -/* key matrix size */ -#define MATRIX_ROWS 6 -#define MATRIX_COLS 17 - -/* key matrix pins */ -#define MATRIX_ROW_PINS { B14, B13, B12, B2, A8, B15 } -#define MATRIX_COL_PINS { C13, C14, C15, H0, A0, A1, A2, A3, A4, A5, A6, A7, B0, B1, H1, B10, B11 } -#define UNUSED_PINS - -/* COL2ROW or ROW2COL */ -#define DIODE_DIRECTION COL2ROW - -/* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 - -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE - -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - -// I2C setup -#define I2C1_SCL 8 -#define I2C1_SDA 9 -#define I2C1_SCL_PAL_MODE 4 -#define I2C1_SDA_PAL_MODE 4 -#define I2C1_TIMINGR_PRESC 0U -#define I2C1_TIMINGR_SCLDEL 11U -#define I2C1_TIMINGR_SDADEL 0U -#define I2C1_TIMINGR_SCLH 14U -#define I2C1_TIMINGR_SCLL 42U - -// I2C EEPROM -#define EEPROM_I2C_24LC64 - -// RGB Matrix defines -#define DRIVER_ADDR_1 0b0110000 -#define DRIVER_ADDR_2 0b0110001 - -#define DRIVER_COUNT 1 -#define DRIVER_1_LED_TOTAL 117 -#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL -#define ISSI_DRIVER_TOTAL DRIVER_LED_TOTAL - -#define RGB_MATRIX_STARTUP_VAL 80 -#define RGB_MATRIX_FRAMEBUFFER_EFFECTS -#define RGB_MATRIX_KEYPRESSES -#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended -#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL - -#define FORCE_NKRO +#include "config_common.h" diff --git a/keyboards/xelus/pachi/rgb/rev1/config.h b/keyboards/xelus/pachi/rgb/rev1/config.h new file mode 100644 index 0000000000..276a128e0c --- /dev/null +++ b/keyboards/xelus/pachi/rgb/rev1/config.h @@ -0,0 +1,120 @@ +/* Copyright 2021 Harrison Chan (Xelus) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x5845 // "XE" +#define PRODUCT_ID 0x5052 // "PR" +#define DEVICE_VER 0x0001 +#define MANUFACTURER Xelus +#define PRODUCT Xelus Pachi RGB + +/* key matrix size */ +#define MATRIX_ROWS 6 +#define MATRIX_COLS 17 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { B14, B13, B12, B2, A8, B15 } +#define MATRIX_COL_PINS { C13, C14, C15, H0, A0, A1, A2, A3, A4, A5, A6, A7, B0, B1, H1, B10, B11 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +// I2C setup +#define I2C1_SCL 8 +#define I2C1_SDA 9 +#define I2C1_SCL_PAL_MODE 4 +#define I2C1_SDA_PAL_MODE 4 +#define I2C1_TIMINGR_PRESC 0U +#define I2C1_TIMINGR_SCLDEL 11U +#define I2C1_TIMINGR_SDADEL 0U +#define I2C1_TIMINGR_SCLH 14U +#define I2C1_TIMINGR_SCLL 42U + +// I2C EEPROM +#define EEPROM_I2C_24LC64 + +// RGB Matrix defines +#define DRIVER_ADDR_1 0b0110000 + +#define DRIVER_COUNT 1 +#define DRIVER_1_LED_TOTAL 117 +#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL +#define ISSI_DRIVER_TOTAL DRIVER_LED_TOTAL + +#define RGB_MATRIX_STARTUP_VAL 80 +#define RGB_MATRIX_FRAMEBUFFER_EFFECTS +#define RGB_MATRIX_KEYPRESSES +#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended +#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL + +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_FRACTAL +#define ENABLE_RGB_MATRIX_PIXEL_RAIN + +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN + +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + +#define FORCE_NKRO diff --git a/keyboards/xelus/pachi/rgb/halconf.h b/keyboards/xelus/pachi/rgb/rev1/halconf.h similarity index 100% rename from keyboards/xelus/pachi/rgb/halconf.h rename to keyboards/xelus/pachi/rgb/rev1/halconf.h diff --git a/keyboards/xelus/pachi/rgb/mcuconf.h b/keyboards/xelus/pachi/rgb/rev1/mcuconf.h similarity index 100% rename from keyboards/xelus/pachi/rgb/mcuconf.h rename to keyboards/xelus/pachi/rgb/rev1/mcuconf.h diff --git a/keyboards/xelus/pachi/rgb/rev1/readme.md b/keyboards/xelus/pachi/rgb/rev1/readme.md new file mode 100644 index 0000000000..2fa775255a --- /dev/null +++ b/keyboards/xelus/pachi/rgb/rev1/readme.md @@ -0,0 +1,17 @@ +# Pachi RGB Rev 1 + +Pachi RGB Rev 1 TKL Keyboard that is a per-key RGB, hotswap, ANSI and tsangan. + +* Keyboard Maintainer: [Xelus22](https://github.com/Xelus22) +* Hardware Supported: Group buys + +Make example for this keyboard (after setting up your build environment): + + make xelus/pachi/rgb/rev1:default + +Reset your keyboard in 3 ways: +* Software reset on Fn + Backspace +* Bootmagic reset: hold down the top left key (usually escape) and plugin the keyboard +* Physical reset button: on the back of the PCB, there should be a small golden button you can press + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/xelus/pachi/rgb/rev1/rev1.c b/keyboards/xelus/pachi/rgb/rev1/rev1.c new file mode 100644 index 0000000000..74f46e6812 --- /dev/null +++ b/keyboards/xelus/pachi/rgb/rev1/rev1.c @@ -0,0 +1,239 @@ +/* Copyright 2021 Harrison Chan (Xelus) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "rev1.h" + +// tested and working +void matrix_io_delay(void) { __asm__ volatile("nop\nnop\nnop\n"); } + +#ifdef RGB_MATRIX_ENABLE +#include "i2c_master.h" +#include "drivers/led/issi/is31fl3741.h" +const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +/* Refer to IS31 manual for these locations + * driver + * | R location + * | | G location + * | | | B location + * | | | | */ + {0, CS39_SW1, CS38_SW1, CS37_SW1}, //A1 + {0, CS36_SW1, CS35_SW1, CS34_SW1}, //A2 + {0, CS33_SW1, CS32_SW1, CS31_SW1}, //A3 + {0, CS30_SW1, CS29_SW1, CS28_SW1}, //A4 + {0, CS27_SW1, CS26_SW1, CS25_SW1}, //A5 + {0, CS24_SW1, CS23_SW1, CS22_SW1}, //A6 + {0, CS21_SW1, CS20_SW1, CS19_SW1}, //A7 + {0, CS18_SW1, CS17_SW1, CS16_SW1}, //A8 + {0, CS15_SW1, CS14_SW1, CS13_SW1}, //A9 + {0, CS12_SW1, CS11_SW1, CS10_SW1}, //A10 + {0, CS9_SW1 , CS8_SW1 , CS7_SW1 }, //A11 + {0, CS6_SW1 , CS5_SW1 , CS4_SW1 }, //A12 + {0, CS3_SW1 , CS2_SW1 , CS1_SW1 }, //A13 + + {0, CS39_SW2, CS38_SW2, CS37_SW2}, //B1 + {0, CS36_SW2, CS35_SW2, CS34_SW2}, //B2 + {0, CS33_SW2, CS32_SW2, CS31_SW2}, //B3 + {0, CS30_SW2, CS29_SW2, CS28_SW2}, //B4 + {0, CS27_SW2, CS26_SW2, CS25_SW2}, //B5 + {0, CS24_SW2, CS23_SW2, CS22_SW2}, //B6 + {0, CS21_SW2, CS20_SW2, CS19_SW2}, //B7 + {0, CS18_SW2, CS17_SW2, CS16_SW2}, //B8 + {0, CS15_SW2, CS14_SW2, CS13_SW2}, //B9 + {0, CS12_SW2, CS11_SW2, CS10_SW2}, //B10 + {0, CS9_SW2 , CS8_SW2 , CS7_SW2 }, //B11 + {0, CS6_SW2 , CS5_SW2 , CS4_SW2 }, //B12 + {0, CS3_SW2 , CS2_SW2 , CS1_SW2 }, //B13 + + {0, CS39_SW3, CS38_SW3, CS37_SW3}, //C1 + {0, CS36_SW3, CS35_SW3, CS34_SW3}, //C2 + {0, CS33_SW3, CS32_SW3, CS31_SW3}, //C3 + {0, CS30_SW3, CS29_SW3, CS28_SW3}, //C4 + {0, CS27_SW3, CS26_SW3, CS25_SW3}, //C5 + {0, CS24_SW3, CS23_SW3, CS22_SW3}, //C6 + {0, CS21_SW3, CS20_SW3, CS19_SW3}, //C7 + {0, CS18_SW3, CS17_SW3, CS16_SW3}, //C8 + {0, CS15_SW3, CS14_SW3, CS13_SW3}, //C9 + {0, CS12_SW3, CS11_SW3, CS10_SW3}, //C10 + {0, CS9_SW3 , CS8_SW3 , CS7_SW3 }, //C11 + {0, CS6_SW3 , CS5_SW3 , CS4_SW3 }, //C12 + {0, CS3_SW3 , CS2_SW3 , CS1_SW3 }, //C13 + + {0, CS39_SW4, CS38_SW4, CS37_SW4}, //D1 + {0, CS36_SW4, CS35_SW4, CS34_SW4}, //D2 + {0, CS33_SW4, CS32_SW4, CS31_SW4}, //D3 + {0, CS30_SW4, CS29_SW4, CS28_SW4}, //D4 + {0, CS27_SW4, CS26_SW4, CS25_SW4}, //D5 + {0, CS24_SW4, CS23_SW4, CS22_SW4}, //D6 + {0, CS21_SW4, CS20_SW4, CS19_SW4}, //D7 + {0, CS18_SW4, CS17_SW4, CS16_SW4}, //D8 + {0, CS15_SW4, CS14_SW4, CS13_SW4}, //D9 + {0, CS12_SW4, CS11_SW4, CS10_SW4}, //D10 + {0, CS9_SW4 , CS8_SW4 , CS7_SW4 }, //D11 + {0, CS6_SW4 , CS5_SW4 , CS4_SW4 }, //D12 + {0, CS3_SW4 , CS2_SW4 , CS1_SW4 }, //D13 + + {0, CS39_SW5, CS38_SW5, CS37_SW5}, //E1 + {0, CS36_SW5, CS35_SW5, CS34_SW5}, //E2 + {0, CS33_SW5, CS32_SW5, CS31_SW5}, //E3 + {0, CS30_SW5, CS29_SW5, CS28_SW5}, //E4 + {0, CS27_SW5, CS26_SW5, CS25_SW5}, //E5 + {0, CS24_SW5, CS23_SW5, CS22_SW5}, //E6 + {0, CS21_SW5, CS20_SW5, CS19_SW5}, //E7 + {0, CS18_SW5, CS17_SW5, CS16_SW5}, //E8 + {0, CS15_SW5, CS14_SW5, CS13_SW5}, //E9 + {0, CS12_SW5, CS11_SW5, CS10_SW5}, //E10 + {0, CS9_SW5 , CS8_SW5 , CS7_SW5 }, //E11 + {0, CS6_SW5 , CS5_SW5 , CS4_SW5 }, //E12 + {0, CS3_SW5 , CS2_SW5 , CS1_SW5 }, //E13 + + {0, CS39_SW6, CS38_SW6, CS37_SW6}, //F1 + {0, CS36_SW6, CS35_SW6, CS34_SW6}, //F2 + {0, CS33_SW6, CS32_SW6, CS31_SW6}, //F3 + {0, CS30_SW6, CS29_SW6, CS28_SW6}, //F4 + {0, CS27_SW6, CS26_SW6, CS25_SW6}, //F5 + {0, CS24_SW6, CS23_SW6, CS22_SW6}, //F6 + {0, CS21_SW6, CS20_SW6, CS19_SW6}, //F7 + {0, CS18_SW6, CS17_SW6, CS16_SW6}, //F8 + {0, CS15_SW6, CS14_SW6, CS13_SW6}, //F9 + {0, CS12_SW6, CS11_SW6, CS10_SW6}, //F10 + {0, CS9_SW6 , CS8_SW6 , CS7_SW6 }, //F11 + {0, CS6_SW6 , CS5_SW6 , CS4_SW6 }, //F12 + {0, CS3_SW6 , CS2_SW6 , CS1_SW6 }, //F13 + + {0, CS39_SW7, CS38_SW7, CS37_SW7}, //G1 + {0, CS36_SW7, CS35_SW7, CS34_SW7}, //G2 + {0, CS33_SW7, CS32_SW7, CS31_SW7}, //G3 + {0, CS30_SW7, CS29_SW7, CS28_SW7}, //G4 + {0, CS27_SW7, CS26_SW7, CS25_SW7}, //G5 + {0, CS24_SW7, CS23_SW7, CS22_SW7}, //G6 + {0, CS21_SW7, CS20_SW7, CS19_SW7}, //G7 + {0, CS18_SW7, CS17_SW7, CS16_SW7}, //G8 + {0, CS15_SW7, CS14_SW7, CS13_SW7}, //G9 + {0, CS12_SW7, CS11_SW7, CS10_SW7}, //G10 + {0, CS9_SW7 , CS8_SW7 , CS7_SW7 }, //G11 + {0, CS6_SW7 , CS5_SW7 , CS4_SW7 }, //G12 + {0, CS3_SW7 , CS2_SW7 , CS1_SW7 }, //G13 + + {0, CS39_SW8, CS38_SW8, CS37_SW8}, //H1 + {0, CS36_SW8, CS35_SW8, CS34_SW8}, //H2 + {0, CS33_SW8, CS32_SW8, CS31_SW8}, //H3 + {0, CS30_SW8, CS29_SW8, CS28_SW8}, //H4 + {0, CS27_SW8, CS26_SW8, CS25_SW8}, //H5 + {0, CS24_SW8, CS23_SW8, CS22_SW8}, //H6 + {0, CS21_SW8, CS20_SW8, CS19_SW8}, //H7 + {0, CS18_SW8, CS17_SW8, CS16_SW8}, //H8 + {0, CS15_SW8, CS14_SW8, CS13_SW8}, //H9 + {0, CS12_SW8, CS11_SW8, CS10_SW8}, //H10 + {0, CS9_SW8 , CS8_SW8 , CS7_SW8 }, //H11 + {0, CS6_SW8 , CS5_SW8 , CS4_SW8 }, //H12 + {0, CS3_SW8 , CS2_SW8 , CS1_SW8 }, //H13 + + {0, CS39_SW9, CS38_SW9, CS37_SW9}, //I1 + {0, CS36_SW9, CS35_SW9, CS34_SW9}, //I2 + {0, CS33_SW9, CS32_SW9, CS31_SW9}, //I3 + {0, CS30_SW9, CS29_SW9, CS28_SW9}, //I4 + {0, CS27_SW9, CS26_SW9, CS25_SW9}, //I5 + {0, CS24_SW9, CS23_SW9, CS22_SW9}, //I6 + {0, CS21_SW9, CS20_SW9, CS19_SW9}, //I7 + {0, CS18_SW9, CS17_SW9, CS16_SW9}, //I8 + {0, CS15_SW9, CS14_SW9, CS13_SW9}, //I9 + {0, CS12_SW9, CS11_SW9, CS10_SW9}, //I10 + {0, CS9_SW9 , CS8_SW9 , CS7_SW9 }, //I11 + {0, CS6_SW9 , CS5_SW9 , CS4_SW9 }, //I12 + {0, CS3_SW9 , CS2_SW9 , CS1_SW9 } //I13 +}; + +__attribute__ ((weak)) +led_config_t g_led_config = { { + { -1+00+3 , NO_LED, -1+26+3 , -1+39+3 , -1+52+3 , -1+65+3 , -1+78+3 , -1+91+3 , -1+104+3 , -1+00+1 , -1+13+1 , -1+26+1 , -1+39+1 , -1+52+1 , -1+65+1 , -1+78+1 , -1+91+1 }, + { -1+00+4 , -1+13+4 , -1+26+4 , -1+39+4 , -1+52+4 , -1+65+4 , -1+78+4 , -1+91+4 , -1+104+4 , -1+00+2 , -1+13+2 , -1+26+2 , -1+39+2 , -1+52+2 , -1+65+2 , -1+78+2 , -1+91+2 }, + { -1+00+6 , -1+13+6 , -1+26+6 , -1+39+6 , -1+52+6 , -1+65+6 , -1+78+6 , -1+91+6 , -1+104+6 , -1+00+5 , -1+13+5 , -1+26+5 , -1+39+5 , -1+52+5 , -1+65+5 , -1+78+5 , -1+91+6 }, + { -1+00+8 , -1+13+8 , -1+26+8 , -1+39+8 , -1+52+8 , -1+65+8 , -1+78+8 , -1+91+8 , -1+104+8 , -1+00+7 , -1+13+7 , -1+26+7 , NO_LED , -1+52+7 , NO_LED , NO_LED , NO_LED }, + { -1+00+11, -1+13+11, -1+26+11, -1+39+11, -1+52+11, -1+65+11, -1+78+11, -1+91+11, -1+104+11, -1+00+10, -1+13+10, NO_LED , -1+52+10, NO_LED , NO_LED , -1+78+10, NO_LED }, + { -1+00+9 , -1+13+9 , -1+26+9 , NO_LED , NO_LED , -1+65+9 , NO_LED , NO_LED , NO_LED , NO_LED , -1+13+12, NO_LED , -1+39+12, -1+52+12, -1+65+12, -1+78+12, -1+91+12} +}, { + {123, 0}, {117, 15}, {0 , 0}, {0 , 15}, {123, 27}, {3 , 27}, {127, 40}, {5 , 40}, {2 , 64}, {133, 52}, {8 , 52}, {131, 64}, {255,255}, + {143, 0}, {130, 15}, {255,255}, {13 , 15}, {136, 27}, {19 , 27}, {140, 40}, {23 , 40}, {18 , 64}, {146, 52}, {29 , 52}, {148, 64}, {255,255}, + {156, 0}, {143, 15}, {26 , 0}, {26 , 15}, {149, 27}, {32 , 27}, {153, 40}, {36 , 40}, {34 , 64}, {255,255}, {42 , 52}, {255,255}, {255,255}, + {169, 0}, {156, 15}, {39 , 0}, {39 , 15}, {162, 27}, {45 , 27}, {255,255}, {49 , 40}, {255,255}, {255,255}, {55 , 52}, {164, 64}, {255,255}, + {182, 0}, {175, 15}, {52 , 0}, {52 , 15}, {179, 27}, {58 , 27}, {174, 40}, {62 , 40}, {255,255}, {170, 52}, {68 , 52}, {180, 64}, {255,255}, + {198, 0}, {198, 15}, {65 , 0}, {65 , 15}, {198, 27}, {71 , 27}, {255,255}, {75 , 40}, {83 , 64}, {255,255}, {81 , 52}, {198, 64}, {255,255}, + {211, 0}, {211, 15}, {84 , 0}, {78 , 15}, {211, 27}, {84 , 27}, {255,255}, {88 , 40}, {255,255}, {211, 52}, {94 , 52}, {211, 64}, {255,255}, + {224, 0}, {224, 15}, {97 , 0}, {91 , 15}, {224, 27}, {97 , 27}, {255,255}, {101, 40}, {255,255}, {255,255}, {107, 52}, {224, 64}, {255,255}, + {255,255}, {255,255}, {110, 0}, {104, 15}, {255,255}, {110, 27}, {255,255}, {114, 40}, {255,255}, {255,255}, {120, 52}, {255,255}, {255,255} +}, { + 1, 4, 1, 1, 4, 1, 4, 1, 1, 4, 1, 4, 4, //0-12 + 1, 4, 4, 4, 4, 4, 4, 4, 1, 4, 4, 1, 4, //13-25 + 1, 4, 1, 4, 4, 4, 4, 4, 1, 4, 4, 4, 4, //26-38 + 1, 4, 1, 4, 4, 4, 4, 4, 4, 4, 4, 1, 4, //39-51 + 1, 1, 1, 4, 1, 4, 1, 4, 4, 1, 4, 1, 4, //52-64 + 1, 1, 1, 4, 1, 4, 4, 4, 1, 4, 4, 1, 4, //65-77 + 1, 1, 1, 4, 1, 4, 4, 4, 4, 1, 4, 1, 4, //78-90 + 1, 1, 1, 4, 1, 4, 4, 4, 4, 4, 4, 1, 4, //91-103 + 4, 4, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4 //104-116 +} }; + +static void init(void) { + i2c_init(); + IS31FL3741_init(DRIVER_ADDR_1); + for (int index = 0; index < ISSI_DRIVER_TOTAL; index++) { + bool enabled = !( ( index == -1+0+13) || //A13 + ( index == -1+13+3) || //B3 + ( index == -1+13+13) || //B13 + ( index == -1+26+10) || //C10 + ( index == -1+26+12) || //C12 + ( index == -1+26+13) || //C13 + ( index == -1+39+7) || //D7 + ( index == -1+39+9) || //D9 + ( index == -1+39+10) || //D10 + ( index == -1+39+13) || //D13 + ( index == -1+52+9) || //E9 + ( index == -1+52+13) || //E13 + ( index == -1+65+7) || //F7 + ( index == -1+65+10) || //F10 + ( index == -1+65+13) || //F13 + ( index == -1+78+7) || //G7 + ( index == -1+78+9) || //G9 + ( index == -1+78+13) || //G13 + ( index == -1+91+7) || //H7 + ( index == -1+91+9) || //H9 + ( index == -1+91+10) || //H10 + ( index == -1+91+13) || //H13 + ( index == -1+104+1) || //I1 + ( index == -1+104+2) || //I2 + ( index == -1+104+5) || //I5 + ( index == -1+104+7) || //I7 + ( index == -1+104+9) || //I9 + ( index == -1+104+10) || //I10 + ( index == -1+104+12) || //I12 + ( index == -1+104+13) //I13 + ); + IS31FL3741_set_led_control_register(index, enabled, enabled, enabled); + } + IS31FL3741_update_led_control_registers(DRIVER_ADDR_1, 0); +} + +static void flush(void) { + IS31FL3741_update_pwm_buffers(DRIVER_ADDR_1, 0); +} + +const rgb_matrix_driver_t rgb_matrix_driver = { + .init = init, + .flush = flush, + .set_color = IS31FL3741_set_color, + .set_color_all = IS31FL3741_set_color_all +}; +#endif diff --git a/keyboards/xelus/pachi/rgb/rev1/rev1.h b/keyboards/xelus/pachi/rgb/rev1/rev1.h new file mode 100644 index 0000000000..894519ebe2 --- /dev/null +++ b/keyboards/xelus/pachi/rgb/rev1/rev1.h @@ -0,0 +1,36 @@ +/* Copyright 2021 Harrison Chan (Xelus) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" + +#define ____ KC_NO + +#define LAYOUT_ansi_tsangan( \ + K000, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, \ + K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, \ + K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, \ + K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, \ + K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K412, K415, \ + K500, K501, K502, K505, K510, K512, K513, K514, K515, K516 \ +) { \ + { K000, ____, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016 }, \ + { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116 }, \ + { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216 }, \ + { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, ____, K313, ____, ____, ____ }, \ + { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, ____, K412, ____, ____, K415, ____ }, \ + { K500, K501, K502, ____, ____, K505, ____, ____, ____, ____, K510, ____, K512, K513, K514, K515, K516 } \ +} diff --git a/keyboards/xelus/pachi/rgb/rules.mk b/keyboards/xelus/pachi/rgb/rev1/rules.mk similarity index 100% rename from keyboards/xelus/pachi/rgb/rules.mk rename to keyboards/xelus/pachi/rgb/rev1/rules.mk diff --git a/keyboards/xelus/pachi/rgb/rev2/config.h b/keyboards/xelus/pachi/rgb/rev2/config.h new file mode 100644 index 0000000000..f66afcfb79 --- /dev/null +++ b/keyboards/xelus/pachi/rgb/rev2/config.h @@ -0,0 +1,121 @@ +/* Copyright 2021 Harrison Chan (Xelus) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x5845 // "XE" +#define PRODUCT_ID 0x5052 // "PR" +#define DEVICE_VER 0x0002 +#define MANUFACTURER Xelus +#define PRODUCT Xelus Pachi RGB + +/* key matrix size */ +#define MATRIX_ROWS 12 +#define MATRIX_COLS 9 + +/* key matrix pins */ +#define MATRIX_ROW_PINS { A5, A6, B0, A7, A8, B1, B4, B5, A15, B3, A13, A14 } +#define MATRIX_COL_PINS { C14, C15, A0, A1, A2, A3, A4, A10, A9} +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +// I2C setup +#define I2C1_SCL 6 +#define I2C1_SDA 7 +#define I2C1_SCL_PAL_MODE 4 +#define I2C1_SDA_PAL_MODE 4 +#define I2C1_TIMINGR_PRESC 0U +#define I2C1_TIMINGR_SCLDEL 11U +#define I2C1_TIMINGR_SDADEL 0U +#define I2C1_TIMINGR_SCLH 14U +#define I2C1_TIMINGR_SCLL 42U + +// I2C EEPROM +#define EEPROM_I2C_24LC64 + +// RGB Matrix defines +#define DRIVER_ADDR_1 0b0110000 + +#define DRIVER_COUNT 1 +#define DRIVER_1_LED_TOTAL 117 +#define DRIVER_LED_TOTAL DRIVER_1_LED_TOTAL +#define ISSI_DRIVER_TOTAL DRIVER_LED_TOTAL + +#define RGB_MATRIX_STARTUP_VAL 80 +#define RGB_MATRIX_FRAMEBUFFER_EFFECTS +#define RGB_MATRIX_KEYPRESSES +#define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended +#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CYCLE_ALL + +#define ENABLE_RGB_MATRIX_ALPHAS_MODS +#define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_BREATHING +#define ENABLE_RGB_MATRIX_BAND_SAT +#define ENABLE_RGB_MATRIX_BAND_VAL +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#define ENABLE_RGB_MATRIX_CYCLE_ALL +#define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#define ENABLE_RGB_MATRIX_DUAL_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_BEACON +#define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#define ENABLE_RGB_MATRIX_RAINDROPS +#define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#define ENABLE_RGB_MATRIX_HUE_BREATHING +#define ENABLE_RGB_MATRIX_HUE_PENDULUM +#define ENABLE_RGB_MATRIX_HUE_WAVE +#define ENABLE_RGB_MATRIX_FRACTAL +#define ENABLE_RGB_MATRIX_PIXEL_RAIN + +#define ENABLE_RGB_MATRIX_TYPING_HEATMAP +#define ENABLE_RGB_MATRIX_DIGITAL_RAIN + +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#define ENABLE_RGB_MATRIX_SPLASH +#define ENABLE_RGB_MATRIX_MULTISPLASH +#define ENABLE_RGB_MATRIX_SOLID_SPLASH +#define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH + + +#define FORCE_NKRO diff --git a/keyboards/xelus/pachi/rgb/rev2/halconf.h b/keyboards/xelus/pachi/rgb/rev2/halconf.h new file mode 100644 index 0000000000..633d94a880 --- /dev/null +++ b/keyboards/xelus/pachi/rgb/rev2/halconf.h @@ -0,0 +1,27 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +/* + * This file was auto-generated by: + * `qmk chibios-confmigrate -i keyboards/xelus/kangaroo/halconf.h -r platforms/chibios/common/configs/halconf.h` + */ + +#pragma once + +#define HAL_USE_I2C TRUE + +#include_next + diff --git a/keyboards/xelus/pachi/rgb/rev2/mcuconf.h b/keyboards/xelus/pachi/rgb/rev2/mcuconf.h new file mode 100644 index 0000000000..20db196d29 --- /dev/null +++ b/keyboards/xelus/pachi/rgb/rev2/mcuconf.h @@ -0,0 +1,28 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +/* + * This file was auto-generated by: + * `qmk chibios-confmigrate -i keyboards/xelus/kangaroo/mcuconf.h -r platforms/chibios/GENERIC_STM32_F072XB/configs/mcuconf.h` + */ + +#pragma once + +#include_next + +#undef STM32_I2C_USE_I2C1 +#define STM32_I2C_USE_I2C1 TRUE + diff --git a/keyboards/xelus/pachi/rgb/rev2/readme.md b/keyboards/xelus/pachi/rgb/rev2/readme.md new file mode 100644 index 0000000000..82a10e4185 --- /dev/null +++ b/keyboards/xelus/pachi/rgb/rev2/readme.md @@ -0,0 +1,18 @@ +# Pachi RGB Rev 2 + +Pachi RGB Rev 2 TKL Keyboard that is a per-key RGB, hotswap, ANSI and tsangan. + +* Keyboard Maintainer: [Xelus22](https://github.com/Xelus22) +* Hardware Supported: Group buys + +Make example for this keyboard (after setting up your build environment): + + make xelus/pachi/rgb/rev2:default + +Reset your keyboard in 3 ways: + +* Software reset on Fn + Backspace +* Bootmagic reset: hold down the top left key (usually escape) and plugin the keyboard +* Physical reset button: on the back of the PCB, there should be a small golden button you can press + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/xelus/pachi/rgb/rev2/rev2.c b/keyboards/xelus/pachi/rgb/rev2/rev2.c new file mode 100644 index 0000000000..3a2e7cacad --- /dev/null +++ b/keyboards/xelus/pachi/rgb/rev2/rev2.c @@ -0,0 +1,245 @@ +/* Copyright 2021 Harrison Chan (Xelus) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "rev2.h" + +// tested and working +void matrix_io_delay(void) { __asm__ volatile("nop\nnop\nnop\n"); } + +#ifdef RGB_MATRIX_ENABLE +#include "i2c_master.h" +#include "drivers/led/issi/is31fl3741.h" +const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +/* Refer to IS31 manual for these locations + * driver + * | R location + * | | G location + * | | | B location + * | | | | */ + {0, CS39_SW1, CS38_SW1, CS37_SW1}, //A1 + {0, CS36_SW1, CS35_SW1, CS34_SW1}, //A2 + {0, CS33_SW1, CS32_SW1, CS31_SW1}, //A3 + {0, CS30_SW1, CS29_SW1, CS28_SW1}, //A4 + {0, CS27_SW1, CS26_SW1, CS25_SW1}, //A5 + {0, CS24_SW1, CS23_SW1, CS22_SW1}, //A6 + {0, CS21_SW1, CS20_SW1, CS19_SW1}, //A7 + {0, CS18_SW1, CS17_SW1, CS16_SW1}, //A8 + {0, CS15_SW1, CS14_SW1, CS13_SW1}, //A9 + {0, CS12_SW1, CS11_SW1, CS10_SW1}, //A10 + {0, CS9_SW1 , CS8_SW1 , CS7_SW1 }, //A11 + {0, CS6_SW1 , CS5_SW1 , CS4_SW1 }, //A12 + {0, CS3_SW1 , CS2_SW1 , CS1_SW1 }, //A13 + + {0, CS39_SW2, CS38_SW2, CS37_SW2}, //B1 + {0, CS36_SW2, CS35_SW2, CS34_SW2}, //B2 + {0, CS33_SW2, CS32_SW2, CS31_SW2}, //B3 + {0, CS30_SW2, CS29_SW2, CS28_SW2}, //B4 + {0, CS27_SW2, CS26_SW2, CS25_SW2}, //B5 + {0, CS24_SW2, CS23_SW2, CS22_SW2}, //B6 + {0, CS21_SW2, CS20_SW2, CS19_SW2}, //B7 + {0, CS18_SW2, CS17_SW2, CS16_SW2}, //B8 + {0, CS15_SW2, CS14_SW2, CS13_SW2}, //B9 + {0, CS12_SW2, CS11_SW2, CS10_SW2}, //B10 + {0, CS9_SW2 , CS8_SW2 , CS7_SW2 }, //B11 + {0, CS6_SW2 , CS5_SW2 , CS4_SW2 }, //B12 + {0, CS3_SW2 , CS2_SW2 , CS1_SW2 }, //B13 + + {0, CS39_SW3, CS38_SW3, CS37_SW3}, //C1 + {0, CS36_SW3, CS35_SW3, CS34_SW3}, //C2 + {0, CS33_SW3, CS32_SW3, CS31_SW3}, //C3 + {0, CS30_SW3, CS29_SW3, CS28_SW3}, //C4 + {0, CS27_SW3, CS26_SW3, CS25_SW3}, //C5 + {0, CS24_SW3, CS23_SW3, CS22_SW3}, //C6 + {0, CS21_SW3, CS20_SW3, CS19_SW3}, //C7 + {0, CS18_SW3, CS17_SW3, CS16_SW3}, //C8 + {0, CS15_SW3, CS14_SW3, CS13_SW3}, //C9 + {0, CS12_SW3, CS11_SW3, CS10_SW3}, //C10 + {0, CS9_SW3 , CS8_SW3 , CS7_SW3 }, //C11 + {0, CS6_SW3 , CS5_SW3 , CS4_SW3 }, //C12 + {0, CS3_SW3 , CS2_SW3 , CS1_SW3 }, //C13 + + {0, CS39_SW4, CS38_SW4, CS37_SW4}, //D1 + {0, CS36_SW4, CS35_SW4, CS34_SW4}, //D2 + {0, CS33_SW4, CS32_SW4, CS31_SW4}, //D3 + {0, CS30_SW4, CS29_SW4, CS28_SW4}, //D4 + {0, CS27_SW4, CS26_SW4, CS25_SW4}, //D5 + {0, CS24_SW4, CS23_SW4, CS22_SW4}, //D6 + {0, CS21_SW4, CS20_SW4, CS19_SW4}, //D7 + {0, CS18_SW4, CS17_SW4, CS16_SW4}, //D8 + {0, CS15_SW4, CS14_SW4, CS13_SW4}, //D9 + {0, CS12_SW4, CS11_SW4, CS10_SW4}, //D10 + {0, CS9_SW4 , CS8_SW4 , CS7_SW4 }, //D11 + {0, CS6_SW4 , CS5_SW4 , CS4_SW4 }, //D12 + {0, CS3_SW4 , CS2_SW4 , CS1_SW4 }, //D13 + + {0, CS39_SW5, CS38_SW5, CS37_SW5}, //E1 + {0, CS36_SW5, CS35_SW5, CS34_SW5}, //E2 + {0, CS33_SW5, CS32_SW5, CS31_SW5}, //E3 + {0, CS30_SW5, CS29_SW5, CS28_SW5}, //E4 + {0, CS27_SW5, CS26_SW5, CS25_SW5}, //E5 + {0, CS24_SW5, CS23_SW5, CS22_SW5}, //E6 + {0, CS21_SW5, CS20_SW5, CS19_SW5}, //E7 + {0, CS18_SW5, CS17_SW5, CS16_SW5}, //E8 + {0, CS15_SW5, CS14_SW5, CS13_SW5}, //E9 + {0, CS12_SW5, CS11_SW5, CS10_SW5}, //E10 + {0, CS9_SW5 , CS8_SW5 , CS7_SW5 }, //E11 + {0, CS6_SW5 , CS5_SW5 , CS4_SW5 }, //E12 + {0, CS3_SW5 , CS2_SW5 , CS1_SW5 }, //E13 + + {0, CS39_SW6, CS38_SW6, CS37_SW6}, //F1 + {0, CS36_SW6, CS35_SW6, CS34_SW6}, //F2 + {0, CS33_SW6, CS32_SW6, CS31_SW6}, //F3 + {0, CS30_SW6, CS29_SW6, CS28_SW6}, //F4 + {0, CS27_SW6, CS26_SW6, CS25_SW6}, //F5 + {0, CS24_SW6, CS23_SW6, CS22_SW6}, //F6 + {0, CS21_SW6, CS20_SW6, CS19_SW6}, //F7 + {0, CS18_SW6, CS17_SW6, CS16_SW6}, //F8 + {0, CS15_SW6, CS14_SW6, CS13_SW6}, //F9 + {0, CS12_SW6, CS11_SW6, CS10_SW6}, //F10 + {0, CS9_SW6 , CS8_SW6 , CS7_SW6 }, //F11 + {0, CS6_SW6 , CS5_SW6 , CS4_SW6 }, //F12 + {0, CS3_SW6 , CS2_SW6 , CS1_SW6 }, //F13 + + {0, CS39_SW7, CS38_SW7, CS37_SW7}, //G1 + {0, CS36_SW7, CS35_SW7, CS34_SW7}, //G2 + {0, CS33_SW7, CS32_SW7, CS31_SW7}, //G3 + {0, CS30_SW7, CS29_SW7, CS28_SW7}, //G4 + {0, CS27_SW7, CS26_SW7, CS25_SW7}, //G5 + {0, CS24_SW7, CS23_SW7, CS22_SW7}, //G6 + {0, CS21_SW7, CS20_SW7, CS19_SW7}, //G7 + {0, CS18_SW7, CS17_SW7, CS16_SW7}, //G8 + {0, CS15_SW7, CS14_SW7, CS13_SW7}, //G9 + {0, CS12_SW7, CS11_SW7, CS10_SW7}, //G10 + {0, CS9_SW7 , CS8_SW7 , CS7_SW7 }, //G11 + {0, CS6_SW7 , CS5_SW7 , CS4_SW7 }, //G12 + {0, CS3_SW7 , CS2_SW7 , CS1_SW7 }, //G13 + + {0, CS39_SW8, CS38_SW8, CS37_SW8}, //H1 + {0, CS36_SW8, CS35_SW8, CS34_SW8}, //H2 + {0, CS33_SW8, CS32_SW8, CS31_SW8}, //H3 + {0, CS30_SW8, CS29_SW8, CS28_SW8}, //H4 + {0, CS27_SW8, CS26_SW8, CS25_SW8}, //H5 + {0, CS24_SW8, CS23_SW8, CS22_SW8}, //H6 + {0, CS21_SW8, CS20_SW8, CS19_SW8}, //H7 + {0, CS18_SW8, CS17_SW8, CS16_SW8}, //H8 + {0, CS15_SW8, CS14_SW8, CS13_SW8}, //H9 + {0, CS12_SW8, CS11_SW8, CS10_SW8}, //H10 + {0, CS9_SW8 , CS8_SW8 , CS7_SW8 }, //H11 + {0, CS6_SW8 , CS5_SW8 , CS4_SW8 }, //H12 + {0, CS3_SW8 , CS2_SW8 , CS1_SW8 }, //H13 + + {0, CS39_SW9, CS38_SW9, CS37_SW9}, //I1 + {0, CS36_SW9, CS35_SW9, CS34_SW9}, //I2 + {0, CS33_SW9, CS32_SW9, CS31_SW9}, //I3 + {0, CS30_SW9, CS29_SW9, CS28_SW9}, //I4 + {0, CS27_SW9, CS26_SW9, CS25_SW9}, //I5 + {0, CS24_SW9, CS23_SW9, CS22_SW9}, //I6 + {0, CS21_SW9, CS20_SW9, CS19_SW9}, //I7 + {0, CS18_SW9, CS17_SW9, CS16_SW9}, //I8 + {0, CS15_SW9, CS14_SW9, CS13_SW9}, //I9 + {0, CS12_SW9, CS11_SW9, CS10_SW9}, //I10 + {0, CS9_SW9 , CS8_SW9 , CS7_SW9 }, //I11 + {0, CS6_SW9 , CS5_SW9 , CS4_SW9 }, //I12 + {0, CS3_SW9 , CS2_SW9 , CS1_SW9 } //I13 +}; + +__attribute__ ((weak)) +led_config_t g_led_config = { { + { -1+00+3 , -1+26+3 , -1+52+3 , -1+78+3 , -1+104+3, -1+13+1 , -1+39+1 , -1+65+1 , -1+91+1 }, + { NO_LED , -1+39+3 , -1+65+3 , -1+91+3 , -1+00+1 , -1+26+1 , -1+52+1 , -1+78+1 , NO_LED }, + { -1+00+4 , -1+26+4 , -1+52+4 , -1+78+4 , -1+104+4, -1+13+2 , -1+39+2 , -1+65+2 , -1+91+2 }, + { -1+13+4 , -1+39+4 , -1+65+4 , -1+91+4 , -1+00+2 , -1+26+2 , -1+52+2 , -1+78+2 , NO_LED }, + { -1+00+6 , -1+26+6 , -1+52+6 , -1+78+6 , -1+104+6, -1+13+5 , -1+39+5 , -1+65+5 , -1+91+6 }, + { -1+13+6 , -1+39+6 , -1+65+6 , -1+91+6 , -1+00+5 , -1+26+5 , -1+52+5 , -1+78+5 , NO_LED }, + { -1+00+8 , -1+26+8 , -1+52+8 , -1+78+8 , -1+104+8, -1+13+7 , NO_LED , NO_LED , NO_LED }, + { -1+13+8 , -1+39+8 , -1+65+8 , -1+91+8 , -1+00+7 , -1+26+7 , -1+52+7 , NO_LED , NO_LED }, + { -1+00+11, -1+26+11, -1+52+11, -1+78+11,-1+104+11, -1+13+10, -1+52+10, NO_LED , NO_LED }, + { -1+13+11, -1+39+11, -1+65+11, -1+91+11, -1+00+10, NO_LED , NO_LED , -1+78+10, NO_LED }, + { -1+00+9 , -1+26+9 , NO_LED , NO_LED , NO_LED , -1+13+12, -1+39+12, -1+65+12, -1+91+12 }, + { -1+13+9 , NO_LED , -1+65+9 , NO_LED , NO_LED , NO_LED , -1+52+12, -1+78+12, NO_LED } +}, { + {123, 0}, {117, 15}, {0 , 0}, {0 , 15}, {123, 27}, {3 , 27}, {127, 40}, {5 , 40}, {2 , 64}, {133, 52}, {8 , 52}, {131, 64}, {255,255}, + {143, 0}, {130, 15}, {255,255}, {13 , 15}, {136, 27}, {19 , 27}, {140, 40}, {23 , 40}, {18 , 64}, {146, 52}, {29 , 52}, {148, 64}, {255,255}, + {156, 0}, {143, 15}, {26 , 0}, {26 , 15}, {149, 27}, {32 , 27}, {153, 40}, {36 , 40}, {34 , 64}, {255,255}, {42 , 52}, {255,255}, {255,255}, + {169, 0}, {156, 15}, {39 , 0}, {39 , 15}, {162, 27}, {45 , 27}, {255,255}, {49 , 40}, {255,255}, {255,255}, {55 , 52}, {164, 64}, {255,255}, + {182, 0}, {175, 15}, {52 , 0}, {52 , 15}, {179, 27}, {58 , 27}, {174, 40}, {62 , 40}, {255,255}, {170, 52}, {68 , 52}, {180, 64}, {255,255}, + {198, 0}, {198, 15}, {65 , 0}, {65 , 15}, {198, 27}, {71 , 27}, {255,255}, {75 , 40}, {83 , 64}, {255,255}, {81 , 52}, {198, 64}, {255,255}, + {211, 0}, {211, 15}, {84 , 0}, {78 , 15}, {211, 27}, {84 , 27}, {255,255}, {88 , 40}, {255,255}, {211, 52}, {94 , 52}, {211, 64}, {255,255}, + {224, 0}, {224, 15}, {97 , 0}, {91 , 15}, {224, 27}, {97 , 27}, {255,255}, {101, 40}, {255,255}, {255,255}, {107, 52}, {224, 64}, {255,255}, + {255,255}, {255,255}, {110, 0}, {104, 15}, {255,255}, {110, 27}, {255,255}, {114, 40}, {255,255}, {255,255}, {120, 52}, {255,255}, {255,255} +}, { + 1, 4, 1, 1, 4, 1, 4, 1, 1, 4, 1, 4, 4, //0-12 + 1, 4, 4, 4, 4, 4, 4, 4, 1, 4, 4, 1, 4, //13-25 + 1, 4, 1, 4, 4, 4, 4, 4, 1, 4, 4, 4, 4, //26-38 + 1, 4, 1, 4, 4, 4, 4, 4, 4, 4, 4, 1, 4, //39-51 + 1, 1, 1, 4, 1, 4, 1, 4, 4, 1, 4, 1, 4, //52-64 + 1, 1, 1, 4, 1, 4, 4, 4, 1, 4, 4, 1, 4, //65-77 + 1, 1, 1, 4, 1, 4, 4, 4, 4, 1, 4, 1, 4, //78-90 + 1, 1, 1, 4, 1, 4, 4, 4, 4, 4, 4, 1, 4, //91-103 + 4, 4, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4 //104-116 +} }; + +static void init(void) { + i2c_init(); + IS31FL3741_init(DRIVER_ADDR_1); + for (int index = 0; index < ISSI_DRIVER_TOTAL; index++) { + bool enabled = !( ( index == -1+0+13) || //A13 + ( index == -1+13+3) || //B3 + ( index == -1+13+13) || //B13 + ( index == -1+26+10) || //C10 + ( index == -1+26+12) || //C12 + ( index == -1+26+13) || //C13 + ( index == -1+39+7) || //D7 + ( index == -1+39+9) || //D9 + ( index == -1+39+10) || //D10 + ( index == -1+39+13) || //D13 + ( index == -1+52+9) || //E9 + ( index == -1+52+13) || //E13 + ( index == -1+65+7) || //F7 + ( index == -1+65+10) || //F10 + ( index == -1+65+13) || //F13 + ( index == -1+78+7) || //G7 + ( index == -1+78+9) || //G9 + ( index == -1+78+13) || //G13 + ( index == -1+91+7) || //H7 + ( index == -1+91+9) || //H9 + ( index == -1+91+10) || //H10 + ( index == -1+91+13) || //H13 + ( index == -1+104+1) || //I1 + ( index == -1+104+2) || //I2 + ( index == -1+104+5) || //I5 + ( index == -1+104+7) || //I7 + ( index == -1+104+9) || //I9 + ( index == -1+104+10) || //I10 + ( index == -1+104+12) || //I12 + ( index == -1+104+13) //I13 + ); + IS31FL3741_set_led_control_register(index, enabled, enabled, enabled); + } + IS31FL3741_update_led_control_registers(DRIVER_ADDR_1, 0); +} + +static void flush(void) { + IS31FL3741_update_pwm_buffers(DRIVER_ADDR_1, 0); +} + +const rgb_matrix_driver_t rgb_matrix_driver = { + .init = init, + .flush = flush, + .set_color = IS31FL3741_set_color, + .set_color_all = IS31FL3741_set_color_all +}; +#endif diff --git a/keyboards/xelus/pachi/rgb/rev2/rev2.h b/keyboards/xelus/pachi/rgb/rev2/rev2.h new file mode 100644 index 0000000000..edc164d729 --- /dev/null +++ b/keyboards/xelus/pachi/rgb/rev2/rev2.h @@ -0,0 +1,42 @@ +/* Copyright 2021 Harrison Chan (Xelus) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "quantum.h" + +#define _____ KC_NO + +#define LAYOUT_ansi_tsangan( \ + K0000, K0001, K0101, K0002, K0102, K0003, K0103, K0004, K0104, K0005, K0105, K0006, K0106, K0007, K0107, K0008, \ + K0200, K0300, K0201, K0301, K0202, K0302, K0203, K0303, K0204, K0304, K0205, K0305, K0206, K0306, K0207, K0307, K0208, \ + K0400, K0500, K0401, K0501, K0402, K0502, K0403, K0503, K0404, K0504, K0405, K0505, K0406, K0506, K0407, K0507, K0408, \ + K0600, K0700, K0601, K0701, K0602, K0702, K0603, K0703, K0604, K0704, K0605, K0705, K0706, \ + K0800, K0900, K0801, K0901, K0802, K0902, K0803, K0903, K0804, K0904, K0805, K0806, K0907, \ + K1000, K1100, K1001, K1102, K1005, K1006, K1106, K1007, K1107, K1008 \ +) { \ + { K0000, K0001, K0002, K0003, K0004, K0005, K0006, K0007, K0008 }, \ + { _____, K0101, K0102, K0103, K0104, K0105, K0106, K0107, _____ }, \ + { K0200, K0201, K0202, K0203, K0204, K0205, K0206, K0207, K0208 }, \ + { K0300, K0301, K0302, K0303, K0304, K0305, K0306, K0307, _____ }, \ + { K0400, K0401, K0402, K0403, K0404, K0405, K0406, K0407, K0408 }, \ + { K0500, K0501, K0502, K0503, K0504, K0505, K0506, K0507, _____ }, \ + { K0600, K0601, K0602, K0603, K0604, K0605, _____, _____, _____ }, \ + { K0700, K0701, K0702, K0703, K0704, K0705, K0706, _____, _____ }, \ + { K0800, K0801, K0802, K0803, K0804, K0805, K0806, _____, _____ }, \ + { K0900, K0901, K0902, K0903, K0904, _____, _____, K0907, _____ }, \ + { K1000, K1001, _____, _____, _____, K1005, K1006, K1007, K1008 }, \ + { K1100, _____, K1102, _____, _____, _____, K1106, K1107, _____ } \ +} diff --git a/keyboards/xelus/pachi/rgb/rev2/rules.mk b/keyboards/xelus/pachi/rgb/rev2/rules.mk new file mode 100644 index 0000000000..0834a9ab6f --- /dev/null +++ b/keyboards/xelus/pachi/rgb/rev2/rules.mk @@ -0,0 +1,31 @@ +# MCU name +MCU = STM32L422 + +# Bootloader selection +BOOTLOADER = stm32-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +AUDIO_ENABLE = no # Audio output + +EEPROM_DRIVER = i2c + +RGB_MATRIX_ENABLE = yes +RGB_MATRIX_DRIVER = custom + +COMMON_VPATH += $(DRIVER_PATH)/issi +SRC += drivers/led/issi/is31fl3741.c + +LTO_ENABLE = yes +OPT = 2 diff --git a/keyboards/xelus/pachi/rgb/rgb.c b/keyboards/xelus/pachi/rgb/rgb.c index 4f2f2c7b77..93ca8406de 100644 --- a/keyboards/xelus/pachi/rgb/rgb.c +++ b/keyboards/xelus/pachi/rgb/rgb.c @@ -13,231 +13,4 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ - #include "rgb.h" -#include -#include - -// tested and working -void matrix_io_delay(void) { __asm__ volatile("nop\nnop\nnop\n"); } - -#ifdef RGB_MATRIX_ENABLE -#include -#include "drivers/led/issi/is31fl3741.h" -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { -/* Refer to IS31 manual for these locations - * driver - * | R location - * | | G location - * | | | B location - * | | | | */ - {0, CS39_SW1, CS38_SW1, CS37_SW1}, //A1 - {0, CS36_SW1, CS35_SW1, CS34_SW1}, //A2 - {0, CS33_SW1, CS32_SW1, CS31_SW1}, //A3 - {0, CS30_SW1, CS29_SW1, CS28_SW1}, //A4 - {0, CS27_SW1, CS26_SW1, CS25_SW1}, //A5 - {0, CS24_SW1, CS23_SW1, CS22_SW1}, //A6 - {0, CS21_SW1, CS20_SW1, CS19_SW1}, //A7 - {0, CS18_SW1, CS17_SW1, CS16_SW1}, //A8 - {0, CS15_SW1, CS14_SW1, CS13_SW1}, //A9 - {0, CS12_SW1, CS11_SW1, CS10_SW1}, //A10 - {0, CS9_SW1 , CS8_SW1 , CS7_SW1 }, //A11 - {0, CS6_SW1 , CS5_SW1 , CS4_SW1 }, //A12 - {0, CS3_SW1 , CS2_SW1 , CS1_SW1 }, //A13 - - {0, CS39_SW2, CS38_SW2, CS37_SW2}, //B1 - {0, CS36_SW2, CS35_SW2, CS34_SW2}, //B2 - {0, CS33_SW2, CS32_SW2, CS31_SW2}, //B3 - {0, CS30_SW2, CS29_SW2, CS28_SW2}, //B4 - {0, CS27_SW2, CS26_SW2, CS25_SW2}, //B5 - {0, CS24_SW2, CS23_SW2, CS22_SW2}, //B6 - {0, CS21_SW2, CS20_SW2, CS19_SW2}, //B7 - {0, CS18_SW2, CS17_SW2, CS16_SW2}, //B8 - {0, CS15_SW2, CS14_SW2, CS13_SW2}, //B9 - {0, CS12_SW2, CS11_SW2, CS10_SW2}, //B10 - {0, CS9_SW2 , CS8_SW2 , CS7_SW2 }, //B11 - {0, CS6_SW2 , CS5_SW2 , CS4_SW2 }, //B12 - {0, CS3_SW2 , CS2_SW2 , CS1_SW2 }, //B13 - - {0, CS39_SW3, CS38_SW3, CS37_SW3}, //C1 - {0, CS36_SW3, CS35_SW3, CS34_SW3}, //C2 - {0, CS33_SW3, CS32_SW3, CS31_SW3}, //C3 - {0, CS30_SW3, CS29_SW3, CS28_SW3}, //C4 - {0, CS27_SW3, CS26_SW3, CS25_SW3}, //C5 - {0, CS24_SW3, CS23_SW3, CS22_SW3}, //C6 - {0, CS21_SW3, CS20_SW3, CS19_SW3}, //C7 - {0, CS18_SW3, CS17_SW3, CS16_SW3}, //C8 - {0, CS15_SW3, CS14_SW3, CS13_SW3}, //C9 - {0, CS12_SW3, CS11_SW3, CS10_SW3}, //C10 - {0, CS9_SW3 , CS8_SW3 , CS7_SW3 }, //C11 - {0, CS6_SW3 , CS5_SW3 , CS4_SW3 }, //C12 - {0, CS3_SW3 , CS2_SW3 , CS1_SW3 }, //C13 - - {0, CS39_SW4, CS38_SW4, CS37_SW4}, //D1 - {0, CS36_SW4, CS35_SW4, CS34_SW4}, //D2 - {0, CS33_SW4, CS32_SW4, CS31_SW4}, //D3 - {0, CS30_SW4, CS29_SW4, CS28_SW4}, //D4 - {0, CS27_SW4, CS26_SW4, CS25_SW4}, //D5 - {0, CS24_SW4, CS23_SW4, CS22_SW4}, //D6 - {0, CS21_SW4, CS20_SW4, CS19_SW4}, //D7 - {0, CS18_SW4, CS17_SW4, CS16_SW4}, //D8 - {0, CS15_SW4, CS14_SW4, CS13_SW4}, //D9 - {0, CS12_SW4, CS11_SW4, CS10_SW4}, //D10 - {0, CS9_SW4 , CS8_SW4 , CS7_SW4 }, //D11 - {0, CS6_SW4 , CS5_SW4 , CS4_SW4 }, //D12 - {0, CS3_SW4 , CS2_SW4 , CS1_SW4 }, //D13 - - {0, CS39_SW5, CS38_SW5, CS37_SW5}, //E1 - {0, CS36_SW5, CS35_SW5, CS34_SW5}, //E2 - {0, CS33_SW5, CS32_SW5, CS31_SW5}, //E3 - {0, CS30_SW5, CS29_SW5, CS28_SW5}, //E4 - {0, CS27_SW5, CS26_SW5, CS25_SW5}, //E5 - {0, CS24_SW5, CS23_SW5, CS22_SW5}, //E6 - {0, CS21_SW5, CS20_SW5, CS19_SW5}, //E7 - {0, CS18_SW5, CS17_SW5, CS16_SW5}, //E8 - {0, CS15_SW5, CS14_SW5, CS13_SW5}, //E9 - {0, CS12_SW5, CS11_SW5, CS10_SW5}, //E10 - {0, CS9_SW5 , CS8_SW5 , CS7_SW5 }, //E11 - {0, CS6_SW5 , CS5_SW5 , CS4_SW5 }, //E12 - {0, CS3_SW5 , CS2_SW5 , CS1_SW5 }, //E13 - - {0, CS39_SW6, CS38_SW6, CS37_SW6}, //F1 - {0, CS36_SW6, CS35_SW6, CS34_SW6}, //F2 - {0, CS33_SW6, CS32_SW6, CS31_SW6}, //F3 - {0, CS30_SW6, CS29_SW6, CS28_SW6}, //F4 - {0, CS27_SW6, CS26_SW6, CS25_SW6}, //F5 - {0, CS24_SW6, CS23_SW6, CS22_SW6}, //F6 - {0, CS21_SW6, CS20_SW6, CS19_SW6}, //F7 - {0, CS18_SW6, CS17_SW6, CS16_SW6}, //F8 - {0, CS15_SW6, CS14_SW6, CS13_SW6}, //F9 - {0, CS12_SW6, CS11_SW6, CS10_SW6}, //F10 - {0, CS9_SW6 , CS8_SW6 , CS7_SW6 }, //F11 - {0, CS6_SW6 , CS5_SW6 , CS4_SW6 }, //F12 - {0, CS3_SW6 , CS2_SW6 , CS1_SW6 }, //F13 - - {0, CS39_SW7, CS38_SW7, CS37_SW7}, //G1 - {0, CS36_SW7, CS35_SW7, CS34_SW7}, //G2 - {0, CS33_SW7, CS32_SW7, CS31_SW7}, //G3 - {0, CS30_SW7, CS29_SW7, CS28_SW7}, //G4 - {0, CS27_SW7, CS26_SW7, CS25_SW7}, //G5 - {0, CS24_SW7, CS23_SW7, CS22_SW7}, //G6 - {0, CS21_SW7, CS20_SW7, CS19_SW7}, //G7 - {0, CS18_SW7, CS17_SW7, CS16_SW7}, //G8 - {0, CS15_SW7, CS14_SW7, CS13_SW7}, //G9 - {0, CS12_SW7, CS11_SW7, CS10_SW7}, //G10 - {0, CS9_SW7 , CS8_SW7 , CS7_SW7 }, //G11 - {0, CS6_SW7 , CS5_SW7 , CS4_SW7 }, //G12 - {0, CS3_SW7 , CS2_SW7 , CS1_SW7 }, //G13 - - {0, CS39_SW8, CS38_SW8, CS37_SW8}, //H1 - {0, CS36_SW8, CS35_SW8, CS34_SW8}, //H2 - {0, CS33_SW8, CS32_SW8, CS31_SW8}, //H3 - {0, CS30_SW8, CS29_SW8, CS28_SW8}, //H4 - {0, CS27_SW8, CS26_SW8, CS25_SW8}, //H5 - {0, CS24_SW8, CS23_SW8, CS22_SW8}, //H6 - {0, CS21_SW8, CS20_SW8, CS19_SW8}, //H7 - {0, CS18_SW8, CS17_SW8, CS16_SW8}, //H8 - {0, CS15_SW8, CS14_SW8, CS13_SW8}, //H9 - {0, CS12_SW8, CS11_SW8, CS10_SW8}, //H10 - {0, CS9_SW8 , CS8_SW8 , CS7_SW8 }, //H11 - {0, CS6_SW8 , CS5_SW8 , CS4_SW8 }, //H12 - {0, CS3_SW8 , CS2_SW8 , CS1_SW8 }, //H13 - - {0, CS39_SW9, CS38_SW9, CS37_SW9}, //I1 - {0, CS36_SW9, CS35_SW9, CS34_SW9}, //I2 - {0, CS33_SW9, CS32_SW9, CS31_SW9}, //I3 - {0, CS30_SW9, CS29_SW9, CS28_SW9}, //I4 - {0, CS27_SW9, CS26_SW9, CS25_SW9}, //I5 - {0, CS24_SW9, CS23_SW9, CS22_SW9}, //I6 - {0, CS21_SW9, CS20_SW9, CS19_SW9}, //I7 - {0, CS18_SW9, CS17_SW9, CS16_SW9}, //I8 - {0, CS15_SW9, CS14_SW9, CS13_SW9}, //I9 - {0, CS12_SW9, CS11_SW9, CS10_SW9}, //I10 - {0, CS9_SW9 , CS8_SW9 , CS7_SW9 }, //I11 - {0, CS6_SW9 , CS5_SW9 , CS4_SW9 }, //I12 - {0, CS3_SW9 , CS2_SW9 , CS1_SW9 } //I13 -}; - -__attribute__ ((weak)) -led_config_t g_led_config = { { - { -1+00+3 , NO_LED, -1+26+3 , -1+39+3 , -1+52+3 , -1+65+3 , -1+78+3 , -1+91+3 , -1+104+3 , -1+00+1 , -1+13+1 , -1+26+1 , -1+39+1 , -1+52+1 , -1+65+1 , -1+78+1 , -1+91+1 }, - { -1+00+4 , -1+13+4 , -1+26+4 , -1+39+4 , -1+52+4 , -1+65+4 , -1+78+4 , -1+91+4 , -1+104+4 , -1+00+2 , -1+13+2 , -1+26+2 , -1+39+2 , -1+52+2 , -1+65+2 , -1+78+2 , -1+91+2 }, - { -1+00+6 , -1+13+6 , -1+26+6 , -1+39+6 , -1+52+6 , -1+65+6 , -1+78+6 , -1+91+6 , -1+104+6 , -1+00+5 , -1+13+5 , -1+26+5 , -1+39+5 , -1+52+5 , -1+65+5 , -1+78+5 , -1+91+6 }, - { -1+00+8 , -1+13+8 , -1+26+8 , -1+39+8 , -1+52+8 , -1+65+8 , -1+78+8 , -1+91+8 , -1+104+8 , -1+00+7 , -1+13+7 , -1+26+7 , NO_LED , -1+52+7 , NO_LED , NO_LED , NO_LED }, - { -1+00+11, -1+13+11, -1+26+11, -1+39+11, -1+52+11, -1+65+11, -1+78+11, -1+91+11, -1+104+11, -1+00+10, -1+13+10, NO_LED , -1+52+10, NO_LED , NO_LED , -1+78+10, NO_LED }, - { -1+00+9 , -1+13+9 , -1+26+9 , NO_LED , NO_LED , -1+65+9 , NO_LED , NO_LED , NO_LED , NO_LED , -1+13+12, NO_LED , -1+39+12, -1+52+12, -1+65+12, -1+78+12, -1+91+12} -}, { - {123, 0}, {117, 15}, {0 , 0}, {0 , 15}, {123, 27}, {3 , 27}, {127, 40}, {5 , 40}, {2 , 64}, {133, 52}, {8 , 52}, {131, 64}, {255,255}, - {143, 0}, {130, 15}, {255,255}, {13 , 15}, {136, 27}, {19 , 27}, {140, 40}, {23 , 40}, {18 , 64}, {146, 52}, {29 , 52}, {148, 64}, {255,255}, - {156, 0}, {143, 15}, {26 , 0}, {26 , 15}, {149, 27}, {32 , 27}, {153, 40}, {36 , 40}, {34 , 64}, {255,255}, {42 , 52}, {255,255}, {255,255}, - {169, 0}, {156, 15}, {39 , 0}, {39 , 15}, {162, 27}, {45 , 27}, {255,255}, {49 , 40}, {255,255}, {255,255}, {55 , 52}, {164, 64}, {255,255}, - {182, 0}, {175, 15}, {52 , 0}, {52 , 15}, {179, 27}, {58 , 27}, {174, 40}, {62 , 40}, {255,255}, {170, 52}, {68 , 52}, {180, 64}, {255,255}, - {198, 0}, {198, 15}, {65 , 0}, {65 , 15}, {198, 27}, {71 , 27}, {255,255}, {75 , 40}, {83 , 64}, {255,255}, {81 , 52}, {198, 64}, {255,255}, - {211, 0}, {211, 15}, {84 , 0}, {78 , 15}, {211, 27}, {84 , 27}, {255,255}, {88 , 40}, {255,255}, {211, 52}, {94 , 52}, {211, 64}, {255,255}, - {224, 0}, {224, 15}, {97 , 0}, {91 , 15}, {224, 27}, {97 , 27}, {255,255}, {101, 40}, {255,255}, {255,255}, {107, 52}, {224, 64}, {255,255}, - {255,255}, {255,255}, {110, 0}, {104, 15}, {255,255}, {110, 27}, {255,255}, {114, 40}, {255,255}, {255,255}, {120, 52}, {255,255}, {255,255} -}, { - 1, 4, 1, 1, 4, 1, 4, 1, 1, 4, 1, 4, 4, //0-12 - 1, 4, 4, 4, 4, 4, 4, 4, 1, 4, 4, 1, 4, //13-25 - 1, 4, 1, 4, 4, 4, 4, 4, 1, 4, 4, 4, 4, //26-38 - 1, 4, 1, 4, 4, 4, 4, 4, 4, 4, 4, 1, 4, //39-51 - 1, 1, 1, 4, 1, 4, 1, 4, 4, 1, 4, 1, 4, //52-64 - 1, 1, 1, 4, 1, 4, 4, 4, 1, 4, 4, 1, 4, //65-77 - 1, 1, 1, 4, 1, 4, 4, 4, 4, 1, 4, 1, 4, //78-90 - 1, 1, 1, 4, 1, 4, 4, 4, 4, 4, 4, 1, 4, //91-103 - 4, 4, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4 //104-116 -} }; - -static void init(void) { - i2c_init(); - IS31FL3741_init(DRIVER_ADDR_1); - for (int index = 0; index < ISSI_DRIVER_TOTAL; index++) { - bool enabled = !( ( index == -1+0+13) || //A13 - ( index == -1+13+3) || //B3 - ( index == -1+13+13) || //B13 - ( index == -1+26+10) || //C10 - ( index == -1+26+12) || //C12 - ( index == -1+26+13) || //C13 - ( index == -1+39+7) || //D7 - ( index == -1+39+9) || //D9 - ( index == -1+39+10) || //D10 - ( index == -1+39+13) || //D13 - ( index == -1+52+9) || //E9 - ( index == -1+52+13) || //E13 - ( index == -1+65+7) || //F7 - ( index == -1+65+10) || //F10 - ( index == -1+65+13) || //F13 - ( index == -1+78+7) || //G7 - ( index == -1+78+9) || //G9 - ( index == -1+78+13) || //G13 - ( index == -1+91+7) || //H7 - ( index == -1+91+9) || //H9 - ( index == -1+91+10) || //H10 - ( index == -1+91+13) || //H13 - ( index == -1+104+1) || //I1 - ( index == -1+104+2) || //I2 - ( index == -1+104+5) || //I5 - ( index == -1+104+7) || //I7 - ( index == -1+104+9) || //I9 - ( index == -1+104+10) || //I10 - ( index == -1+104+12) || //I12 - ( index == -1+104+13) //I13 - ); - IS31FL3741_set_led_control_register(index, enabled, enabled, enabled); - } - IS31FL3741_update_led_control_registers(DRIVER_ADDR_1, 0); -} - -static void flush(void) { - IS31FL3741_update_pwm_buffers(DRIVER_ADDR_1, 0); - // Just for reference. Only first driver is used? - // IS31FL3741_update_pwm_buffers(DRIVER_ADDR_2, 1); -} - -const rgb_matrix_driver_t rgb_matrix_driver = { - .init = init, - .flush = flush, - .set_color = IS31FL3741_set_color, - .set_color_all = IS31FL3741_set_color_all -}; -#endif diff --git a/keyboards/xelus/pachi/rgb/rgb.h b/keyboards/xelus/pachi/rgb/rgb.h index 894519ebe2..36ca2937a6 100644 --- a/keyboards/xelus/pachi/rgb/rgb.h +++ b/keyboards/xelus/pachi/rgb/rgb.h @@ -17,20 +17,8 @@ #include "quantum.h" -#define ____ KC_NO - -#define LAYOUT_ansi_tsangan( \ - K000, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216, \ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, \ - K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K412, K415, \ - K500, K501, K502, K505, K510, K512, K513, K514, K515, K516 \ -) { \ - { K000, ____, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016 }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116 }, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K215, K216 }, \ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, ____, K313, ____, ____, ____ }, \ - { K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, ____, K412, ____, ____, K415, ____ }, \ - { K500, K501, K502, ____, ____, K505, ____, ____, ____, ____, K510, ____, K512, K513, K514, K515, K516 } \ -} +#if defined(KEYBOARD_xelus_pachi_rgb_rev1) + #include "rev1.h" +#elif defined(KEYBOARD_xelus_pachi_rgb_rev2) + #include "rev2.h" +#endif From f3897f55b5cc254b30aef73cd08a8d9ba42e6fc0 Mon Sep 17 00:00:00 2001 From: Sleepdealer <35879391+Sleepdealr@users.noreply.github.com> Date: Tue, 16 Nov 2021 14:30:21 -0500 Subject: [PATCH 500/595] [Keyboard] Add FootFingers Puca (#14837) --- keyboards/ffkeebs/puca/config.h | 69 +++++++++ keyboards/ffkeebs/puca/info.json | 37 +++++ .../ffkeebs/puca/keymaps/default/keymap.c | 52 +++++++ keyboards/ffkeebs/puca/puca.c | 133 ++++++++++++++++++ keyboards/ffkeebs/puca/puca.h | 41 ++++++ keyboards/ffkeebs/puca/readme.md | 23 +++ keyboards/ffkeebs/puca/rules.mk | 25 ++++ 7 files changed, 380 insertions(+) create mode 100644 keyboards/ffkeebs/puca/config.h create mode 100644 keyboards/ffkeebs/puca/info.json create mode 100644 keyboards/ffkeebs/puca/keymaps/default/keymap.c create mode 100644 keyboards/ffkeebs/puca/puca.c create mode 100644 keyboards/ffkeebs/puca/puca.h create mode 100644 keyboards/ffkeebs/puca/readme.md create mode 100644 keyboards/ffkeebs/puca/rules.mk diff --git a/keyboards/ffkeebs/puca/config.h b/keyboards/ffkeebs/puca/config.h new file mode 100644 index 0000000000..29bb9a782b --- /dev/null +++ b/keyboards/ffkeebs/puca/config.h @@ -0,0 +1,69 @@ +/* +Copyright 2021 Sleepdealer + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4646 // FF +#define PRODUCT_ID 0x0002 +#define DEVICE_VER 0x0001 +#define MANUFACTURER FootFingers +#define PRODUCT Puca + +#define MATRIX_ROWS 6 +#define MATRIX_COLS 5 + // 0 , 1 , 2 , 3 , 4 , 5 +#define MATRIX_ROW_PINS { B4, E6, D7, B5, C6, F6} +#define MATRIX_COL_PINS { F7, B1, B3, B2, B6} + +#define DIODE_DIRECTION COL2ROW + +#ifdef RGBLIGHT_ENABLE + #define RGB_DI_PIN D4 + + #define RGBLIGHT_EFFECT_BREATHING + #define RGBLIGHT_EFFECT_RAINBOW_MOOD + #define RGBLIGHT_EFFECT_RAINBOW_SWIRL + #define RGBLIGHT_EFFECT_SNAKE + #define RGBLIGHT_EFFECT_KNIGHT + #define RGBLIGHT_EFFECT_CHRISTMAS + #define RGBLIGHT_EFFECT_STATIC_GRADIENT + #define RGBLIGHT_EFFECT_RGB_TEST + #define RGBLIGHT_EFFECT_ALTERNATING + #define RGBLIGHT_EFFECT_TWINKLE + #define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_STATIC_LIGHT + #define RGBLED_NUM 8 +#endif + + +#define ENCODERS_PAD_A { F4 } +#define ENCODERS_PAD_B { F5 } + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + diff --git a/keyboards/ffkeebs/puca/info.json b/keyboards/ffkeebs/puca/info.json new file mode 100644 index 0000000000..0b5b957e63 --- /dev/null +++ b/keyboards/ffkeebs/puca/info.json @@ -0,0 +1,37 @@ +{ + "keyboard_name": "Puca", + "url": "https://ffkeebs.com/collections/puca/", + "maintainer": "Sleepdealr", + "layouts": { + "LAYOUT": { + "layout": [ + { "label": "Rotary", "x": 0.5, "y": 0 }, + { "label": "Pg Up", "x": 2, "y": 0 }, + { "label": "Pg Dn", "x": 3, "y": 0 }, + { "label": "Layer Toggle", "x": 0, "y": 1.25 }, + { "label": "/", "x": 1, "y": 1.25 }, + { "label": "*", "x": 2, "y": 1.25 }, + { "label": "-", "x": 3, "y": 1.25 }, + { "label": "7", "x": 0, "y": 2.25 }, + { "label": "8", "x": 1, "y": 2.25 }, + { "label": "9", "x": 2, "y": 2.25 }, + { "label": "+", "x": 3, "y": 2.25, "h": 2 }, + { "label": "+", "x": 4, "y": 2.25 }, + { "label": "4", "x": 0, "y": 3.25 }, + { "label": "5", "x": 1, "y": 3.25 }, + { "label": "6", "x": 2, "y": 3.25 }, + { "label": "|", "x": 4, "y": 3.25 }, + { "label": "1", "x": 0, "y": 4.25 }, + { "label": "2", "x": 1, "y": 4.25 }, + { "label": "3", "x": 2, "y": 4.25 }, + { "label": "Enter", "x": 3, "y": 4.25, "h": 2 }, + { "label": "Enter", "x": 4, "y": 4.25 }, + { "label": "0", "x": 0, "y": 5.25, "w": 2 }, + { "label": ".", "x": 2, "y": 5.25 }, + { "label": ".", "x": 4, "y": 5.25 }, + { "label": "0", "x": 0, "y": 6.25 }, + { "label": "00", "x": 1, "y": 6.25 } + ] + } + } +} diff --git a/keyboards/ffkeebs/puca/keymaps/default/keymap.c b/keyboards/ffkeebs/puca/keymaps/default/keymap.c new file mode 100644 index 0000000000..fb8a6bc7c1 --- /dev/null +++ b/keyboards/ffkeebs/puca/keymaps/default/keymap.c @@ -0,0 +1,52 @@ +/* Copyright 2021 Sleepdealer + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +// 00 Functionality +enum custom_keycodes { + MC_00 = SAFE_RANGE, +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case MC_00: + if (record->event.pressed) { + SEND_STRING("00"); + } + break; + } + return true; +}; + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + LAYOUT( + KC_MUTE, KC_PGUP, KC_PGDN, + TG(1), KC_PSLS, KC_PAST, KC_PMNS, + KC_P7, KC_P8, KC_P9, KC_PPLS, KC_PPLS, + KC_P4, KC_P5, KC_P6, KC_PIPE, + KC_P1, KC_P2, KC_P3, KC_ENTER, KC_ENTER, + KC_P0, MC_00, KC_PDOT, KC_PDOT, + KC_P0), + LAYOUT( + KC_TRNS, RGB_HUI, RGB_VAI, + TG(1), RGB_TOG, RGB_HUD, RGB_VAD, + KC_PGUP, KC_UP, KC_PGDN, RGB_MOD, RGB_MOD, + KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, + KC_INS, KC_HOME, KC_END, RGB_RMOD, RGB_RMOD, + KC_ESC, KC_TRNS, KC_DEL, KC_TRNS, + KC_ESC) +}; diff --git a/keyboards/ffkeebs/puca/puca.c b/keyboards/ffkeebs/puca/puca.c new file mode 100644 index 0000000000..e08ac0cb3b --- /dev/null +++ b/keyboards/ffkeebs/puca/puca.c @@ -0,0 +1,133 @@ +/* Copyright 2021 Sleepdealer + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "puca.h" + +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + if (clockwise) { + tap_code_delay(KC_VOLU, 10); // Right + } else { + tap_code_delay(KC_VOLD, 10); // Left + } + return false; +} + + +// OLED +#ifdef OLED_ENABLE +__attribute__((weak)) oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_270; } +__attribute__((weak)) void oled_task_user(void) { +// WPM-responsive animation stuff here +# define IDLE_FRAMES 2 +# define ANIM_FRAME_DURATION 400 // how long each frame lasts in ms +// #define SLEEP_TIMER 60000 // should sleep after this period of 0 wpm, needs fixing +# define ANIM_SIZE 636 // number of bytes in array, minimize for adequate firmware size, max is 1024 + static uint32_t anim_timer = 0; + static uint8_t current_idle_frame = 0; + // Credit to u/Pop-X- for the initial code. You can find his commit here https://github.com/qmk/qmk_firmware/pull/9264/files#diff-303f6e3a7a5ee54be0a9a13630842956R196-R333. + static const char PROGMEM idle[IDLE_FRAMES][ANIM_SIZE] = {{ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x80, 0x80, 0x60, 0x60, 0x18, 0x18, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, + 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x06, 0x18, 0x18, 0x60, 0x60, 0x80, 0x80, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x1f, 0x1f, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x1f, 0x1f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x03, 0x03, 0x0c, 0x0c, 0x0c, 0x0c, + 0x0c, 0x03, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x06, 0x06, 0x18, 0x18, 0x60, 0x60, 0x18, 0x18, 0x60, 0x60, + 0x80, 0x80, 0x60, 0x60, 0x80, 0x80, 0x60, 0x60, 0x18, 0x18, 0x06, 0x07, 0x01, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x01, 0x01, 0x00, 0x00, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 + },{ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xc0, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, + 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, 0xc0, 0xc0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xfc, 0xfc, 0x03, 0x03, 0x00, 0x00, 0xf8, 0xf8, 0x00, 0x00, 0x00, 0x00, + 0x00, 0xf8, 0xf8, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x03, 0xfc, 0xfc, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x18, 0x18, 0x60, 0x60, 0x60, 0x60, + 0x60, 0x18, 0x18, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x0f, 0x0f, 0x30, 0x30, 0xc0, 0xc0, 0x00, 0x00, 0xc0, 0xc0, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc0, 0xc0, 0x30, 0x3f, 0x0f, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x03, 0x00, 0x00, 0x03, 0x03, + 0x0c, 0x0c, 0x03, 0x03, 0x0c, 0x0c, 0x03, 0x03, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 + }}; + + void animation_phase(void) { + current_idle_frame = (current_idle_frame + 1) % IDLE_FRAMES; + oled_write_raw_P(idle[abs((IDLE_FRAMES - 1) - current_idle_frame)], ANIM_SIZE); + } + if (timer_elapsed32(anim_timer) > ANIM_FRAME_DURATION) { + anim_timer = timer_read32(); + animation_phase(); + } + + oled_set_cursor(0, 6); + oled_write_P(PSTR("PUCA\nPAD\n"), false); + oled_write_P(PSTR("-----\n"), false); + // Host Keyboard Layer Status + oled_write_P(PSTR("MODE\n"), false); + oled_write_P(PSTR("\n"), false); + switch (get_highest_layer(layer_state)) { + case 0: + oled_write_P(PSTR("BASE\n"), false); + break; + case 1: + oled_write_P(PSTR("FUNC\n"), false); + break; + } +} +#endif \ No newline at end of file diff --git a/keyboards/ffkeebs/puca/puca.h b/keyboards/ffkeebs/puca/puca.h new file mode 100644 index 0000000000..bc17c9f36f --- /dev/null +++ b/keyboards/ffkeebs/puca/puca.h @@ -0,0 +1,41 @@ +/* Copyright 2021 Sleepdealer + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +// K24 is 2U Plus +// K44 is 2u Enter +// K54 is 2u 0 + + +#include "quantum.h" + +#define LAYOUT( \ + K00, K02, K03, \ + K10, K11, K12, K13, \ + K20, K21, K22, K23, K24,\ + K30, K31, K32, K33, \ + K40, K41, K42, K43, K44,\ + K50, K51, K52, K53, \ + K54 \ +) { \ + { K00, KC_NO, K02, K03, KC_NO }, \ + { K10, K11, K12, K13, KC_NO }, \ + { K20, K21, K22, K23, K24 }, \ + { K30, K31, K32, K33, KC_NO }, \ + { K40, K41, K42, K43, K44 }, \ + { K50, K51, K52, K53, K54 }, \ +} diff --git a/keyboards/ffkeebs/puca/readme.md b/keyboards/ffkeebs/puca/readme.md new file mode 100644 index 0000000000..ff0b2c49ae --- /dev/null +++ b/keyboards/ffkeebs/puca/readme.md @@ -0,0 +1,23 @@ +# Puca Pad + +* Keyboard Maintainer: [Sleepdealer](https://github.com/Sleepdealr) +* Hardware Supported: Puca Pad +* Hardware Availability: Puca GB + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (the encoder) +* **Physical reset button**: Briefly press the button on the front of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available + +Make example for this keyboard (after setting up your build environment): + + make ffkeebs/puca:default + +Flashing example for this keyboard: + + make ffkeebs/puca:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/ffkeebs/puca/rules.mk b/keyboards/ffkeebs/puca/rules.mk new file mode 100644 index 0000000000..b27ecc458b --- /dev/null +++ b/keyboards/ffkeebs/puca/rules.mk @@ -0,0 +1,25 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = caterina + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow + +ENCODER_ENABLE = yes #Rotary encoder + +OLED_ENABLE = yes #OLED +LTO_ENABLE = yes # Enable Link Time Optimization to reduce firmware size From c6c35f3363c71b9ef0fd66ae2542113ca315175f Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Tue, 16 Nov 2021 23:05:54 +0000 Subject: [PATCH 501/595] wsk/sl40: remove dead space from LAYOUT_all (#15183) --- keyboards/wsk/sl40/info.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/keyboards/wsk/sl40/info.json b/keyboards/wsk/sl40/info.json index 586da2d445..f70b3f8d51 100644 --- a/keyboards/wsk/sl40/info.json +++ b/keyboards/wsk/sl40/info.json @@ -7,7 +7,7 @@ "layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":0, "y":1, "w":1.25}, {"x":1.25, "y":1}, {"x":2.25, "y":1}, {"x":3.25, "y":1}, {"x":4.25, "y":1}, {"x":5.25, "y":1}, {"x":6.25, "y":1}, {"x":7.25, "y":1}, {"x":8.25, "y":1}, {"x":9.25, "y":1}, {"x":10.25, "y":1}, {"x":11.25, "y":1}, {"x":12.25, "y":1, "w":1.75}, {"x":0, "y":2, "w":1.75}, {"x":1.75, "y":2}, {"x":2.75, "y":2}, {"x":3.75, "y":2}, {"x":4.75, "y":2}, {"x":5.75, "y":2}, {"x":6.75, "y":2}, {"x":7.75, "y":2}, {"x":8.75, "y":2}, {"x":9.75, "y":2}, {"x":10.75, "y":2, "w":1.25}, {"x":12, "y":2}, {"x":13, "y":2}, {"x":0, "y":3, "w":1.25}, {"x":1.25, "y":3, "w":1.25}, {"x":2.5, "y":3, "w":1.25}, {"x":3.75, "y":3, "w":6.25}, {"x":10, "y":3}, {"x":11, "y":3}, {"x":12, "y":3}, {"x":13, "y":3}] }, "LAYOUT_all": { - "layout": [{"label":"Esc", "x":0, "y":1}, {"label":"Q", "x":1, "y":1}, {"label":"W", "x":2, "y":1}, {"label":"E", "x":3, "y":1}, {"label":"R", "x":4, "y":1},{"label":"T", "x":5, "y":1}, {"label":"Y", "x":6, "y":1}, {"label":"U", "x":7, "y":1}, {"label":"I", "x":8, "y":1}, {"label":"O", "x":9, "y":1}, {"label":"P", "x":10, "y":1}, {"label":"{", "x":11, "y":1}, {"label":"}", "x":12, "y":1}, {"label":"BS", "x":13, "y":1}, {"label":"Tab", "x":0, "y":2, "w":1.25}, {"label":"A", "x":1.25, "y":2}, {"label":"S", "x":2.25, "y":2}, {"label":"D", "x":3.25, "y":2}, {"label":"F", "x":4.25, "y":2}, {"label":"G", "x":5.25, "y":2}, {"label":"H", "x":6.25, "y":2}, {"label":"J", "x":7.25, "y":2}, {"label":"K", "x":8.25, "y":2}, {"label":"L", "x":9.25, "y":2}, {"label":":", "x":10.25, "y":2}, {"label":"\"", "x":11.25, "y":2}, {"label":"Enter", "x":12.25, "y":2, "w":1.75}, {"label":"Shift", "x":0, "y":3, "w":1.75}, {"label":"Z", "x":1.75, "y":3}, {"label":"X", "x":2.75, "y":3}, {"label":"C", "x":3.75, "y":3}, {"label":"V", "x":4.75, "y":3}, {"label":"B", "x":5.75, "y":3}, {"label":"N", "x":6.75, "y":3}, {"label":"M", "x":7.75, "y":3}, {"label":"<", "x":8.75, "y":3}, {"label":">", "x":9.75, "y":3}, {"label":"?", "x":10.75, "y":3}, {"x":11.75, "y":3}, {"label":"Shift", "x":12.75, "y":3, "w":1.25}, {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, {"x":3.75, "y":4}, {"x":4.75, "y":4, "w":2.25}, {"x":7, "y":4, "w":2}, {"x":9, "y":4}, {"label":"Alt", "x":10, "y":4}, {"label":"Win", "x":11, "y":4}, {"label":"Menu", "x":12, "y":4}, {"label":"Ctrl", "x":13, "y":4}] + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"Q", "x":1, "y":0}, {"label":"W", "x":2, "y":0}, {"label":"E", "x":3, "y":0}, {"label":"R", "x":4, "y":0},{"label":"T", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"label":"{", "x":11, "y":0}, {"label":"}", "x":12, "y":0}, {"label":"BS", "x":13, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.25}, {"label":"A", "x":1.25, "y":1}, {"label":"S", "x":2.25, "y":1}, {"label":"D", "x":3.25, "y":1}, {"label":"F", "x":4.25, "y":1}, {"label":"G", "x":5.25, "y":1}, {"label":"H", "x":6.25, "y":1}, {"label":"J", "x":7.25, "y":1}, {"label":"K", "x":8.25, "y":1}, {"label":"L", "x":9.25, "y":1}, {"label":":", "x":10.25, "y":1}, {"label":"\"", "x":11.25, "y":1}, {"label":"Enter", "x":12.25, "y":1, "w":1.75}, {"label":"Shift", "x":0, "y":2, "w":1.75}, {"label":"Z", "x":1.75, "y":2}, {"label":"X", "x":2.75, "y":2}, {"label":"C", "x":3.75, "y":2}, {"label":"V", "x":4.75, "y":2}, {"label":"B", "x":5.75, "y":2}, {"label":"N", "x":6.75, "y":2}, {"label":"M", "x":7.75, "y":2}, {"label":"<", "x":8.75, "y":2}, {"label":">", "x":9.75, "y":2}, {"label":"?", "x":10.75, "y":2}, {"x":11.75, "y":2}, {"label":"Shift", "x":12.75, "y":2, "w":1.25}, {"label":"Ctrl", "x":0, "y":3, "w":1.25}, {"label":"Win", "x":1.25, "y":3, "w":1.25}, {"label":"Alt", "x":2.5, "y":3, "w":1.25}, {"x":3.75, "y":3}, {"x":4.75, "y":3, "w":2.25}, {"x":7, "y":3, "w":2}, {"x":9, "y":3}, {"label":"Alt", "x":10, "y":3}, {"label":"Win", "x":11, "y":3}, {"label":"Menu", "x":12, "y":3}, {"label":"Ctrl", "x":13, "y":3}] } } } From 86dd439eb68759ef0daa19b09be95048b93e08d9 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Wed, 17 Nov 2021 01:36:10 +0000 Subject: [PATCH 502/595] handwired/myskeeb Layout Macro Refactor (#15181) * handwired/myskeeb: update key positions in info.json * remove unused matrix positions L26 and R20 aren't physically present on the keyboard. * add image to readme file * add supported hardware and flashing example to readme --- keyboards/handwired/myskeeb/info.json | 145 +++++++++--------- .../myskeeb/keymaps/default/keymap.c | 11 +- keyboards/handwired/myskeeb/myskeeb.h | 16 +- keyboards/handwired/myskeeb/readme.md | 7 + 4 files changed, 95 insertions(+), 84 deletions(-) diff --git a/keyboards/handwired/myskeeb/info.json b/keyboards/handwired/myskeeb/info.json index eecb670536..27f1d2ae52 100644 --- a/keyboards/handwired/myskeeb/info.json +++ b/keyboards/handwired/myskeeb/info.json @@ -5,80 +5,85 @@ "layouts": { "LAYOUT": { "layout": [ - {"x":0, "y":0}, - {"x":1, "y":0}, - {"x":2, "y":0}, - {"x":3, "y":0}, - {"x":4, "y":0}, - {"x":5, "y":0}, - {"x":6, "y":0}, - {"x":8, "y":0}, - {"x":9, "y":0}, - {"x":10, "y":0}, - {"x":11, "y":0}, - {"x":12, "y":0}, - {"x":13, "y":0}, - {"x":14, "y":0}, + {"x":0, "y":1, "w":1.5}, + {"x":1.5, "y":0.75}, + {"x":2.5, "y":0.25}, + {"x":3.5, "y":0}, + {"x":4.5, "y":0.25}, + {"x":5.5, "y":0.75}, + {"x":6.5, "y":1}, - {"x":0, "y":1}, - {"x":1, "y":1}, - {"x":2, "y":1}, - {"x":3, "y":1}, - {"x":4, "y":1}, - {"x":5, "y":1}, - {"x":6, "y":1}, - {"x":8, "y":1}, - {"x":9, "y":1}, - {"x":10, "y":1}, - {"x":11, "y":1}, - {"x":12, "y":1}, - {"x":13, "y":1}, - {"x":14, "y":1}, + {"x":9.5, "y":1}, + {"x":10.5, "y":0.75}, + {"x":11.5, "y":0.25}, + {"x":12.5, "y":0}, + {"x":13.5, "y":0.25}, + {"x":14.5, "y":0.75}, + {"x":15.5, "y":1, "w":1.5}, - {"x":0, "y":2}, - {"x":1, "y":2}, - {"x":2, "y":2}, - {"x":3, "y":2}, - {"x":4, "y":2}, - {"x":5, "y":2}, - {"x":6, "y":2}, - {"x":8, "y":2}, - {"x":9, "y":2}, - {"x":10, "y":2}, - {"x":11, "y":2}, - {"x":12, "y":2}, - {"x":13, "y":2}, - {"x":14, "y":2}, + {"x":0, "y":2, "w":1.5}, + {"x":1.5, "y":1.75}, + {"x":2.5, "y":1.25}, + {"x":3.5, "y":1}, + {"x":4.5, "y":1.25}, + {"x":5.5, "y":1.75}, + {"x":6.5, "y":2, "h":1.5}, - {"x":0, "y":3}, - {"x":1, "y":3}, - {"x":2, "y":3}, - {"x":3, "y":3}, - {"x":4, "y":3}, - {"x":5, "y":3}, - {"x":6, "y":3}, - {"x":8, "y":3}, - {"x":9, "y":3}, - {"x":10, "y":3}, - {"x":11, "y":3}, - {"x":12, "y":3}, - {"x":13, "y":3}, - {"x":14, "y":3}, + {"x":9.5, "y":2, "h":1.5}, + {"x":10.5, "y":1.75}, + {"x":11.5, "y":1.25}, + {"x":12.5, "y":1}, + {"x":13.5, "y":1.25}, + {"x":14.5, "y":1.75}, + {"x":15.5, "y":2, "w":1.5}, - {"x":0, "y":4}, - {"x":1, "y":4}, - {"x":2, "y":4}, - {"x":3, "y":4}, - {"x":4, "y":4}, - {"x":5, "y":4}, - {"x":6, "y":4}, - {"x":8, "y":4}, - {"x":9, "y":4}, - {"x":10, "y":4}, - {"x":11, "y":4}, - {"x":12, "y":4}, - {"x":13, "y":4}, - {"x":14, "y":4} + {"x":0, "y":3, "w":1.5}, + {"x":1.5, "y":2.75}, + {"x":2.5, "y":2.25}, + {"x":3.5, "y":2}, + {"x":4.5, "y":2.25}, + {"x":5.5, "y":2.75}, + + {"x":10.5, "y":2.75}, + {"x":11.5, "y":2.25}, + {"x":12.5, "y":2}, + {"x":13.5, "y":2.25}, + {"x":14.5, "y":2.75}, + {"x":15.5, "y":3, "w":1.5}, + + {"x":0, "y":4, "w":1.5}, + {"x":1.5, "y":3.75}, + {"x":2.5, "y":3.25}, + {"x":3.5, "y":3}, + {"x":4.5, "y":3.25}, + {"x":5.5, "y":3.75}, + {"x":6.5, "y":3.5, "h":1.5}, + + {"x":9.5, "y":3.5, "h":1.5}, + {"x":10.5, "y":3.75}, + {"x":11.5, "y":3.25}, + {"x":12.5, "y":3}, + {"x":13.5, "y":3.25}, + {"x":14.5, "y":3.75}, + {"x":15.5, "y":4, "w":1.5}, + + {"x":0.25, "y":5}, + {"x":1.5, "y":4.75}, + {"x":2.5, "y":4.25}, + {"x":3.5, "y":4}, + + {"x":5, "y":6}, + {"x":6, "y":5.5, "h":2}, + {"x":7, "y":5.5, "h":2}, + + {"x":9, "y":5.5, "h":2}, + {"x":10, "y":5.5, "h":2}, + {"x":11, "y":6}, + + {"x":12.5, "y":4}, + {"x":13.5, "y":4.25}, + {"x":14.5, "y":4.75}, + {"x":15.75, "y":5} ] } } diff --git a/keyboards/handwired/myskeeb/keymaps/default/keymap.c b/keyboards/handwired/myskeeb/keymaps/default/keymap.c index 05abf5d543..61cf607865 100644 --- a/keyboards/handwired/myskeeb/keymaps/default/keymap.c +++ b/keyboards/handwired/myskeeb/keymaps/default/keymap.c @@ -68,32 +68,29 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_EQL, KC_MINS, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, TD(OP_QT), TD(CL_QT), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_NO, KC_NO, KC_H, KC_J, KC_K, KC_L, KC_SCLN, TD(TD_DQ), + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, TD(TD_DQ), KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_CALC, KC_PSCR, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_LCTL, KC_LGUI, KC_LALT, KC_DEL, LT(1,KC_BSPC), KC_SPC, KC_ENT, KC_ENT, KC_SPC, TD(TL), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT ), [1] = LAYOUT( KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_BSPC, KC_CAPS, KC_PDOT, KC_PPLS, KC_PMNS, KC_PAST, KC_PSLS, KC_MSEL, KC_MSTP, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PWR, RESET, - KC_TAB, KC_P6, KC_P7, KC_P8, KC_P9, KC_P0, KC_NO, KC_NO, KC_SLCK, NK_ON, EEP_RST, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TAB, KC_P6, KC_P7, KC_P8, KC_P9, KC_P0, KC_SLCK, NK_ON, EEP_RST, KC_TRNS, KC_TRNS, KC_TRNS, KC_LSFT, KC_P1, KC_P2, KC_P3, KC_P4, KC_P5, KC_MUTE, KC_MPLY, KC_NLCK, NK_OFF, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LCTL, KC_LGUI, KC_LALT, KC_BSPC, KC_TRNS, KC_VOLD, KC_VOLU, KC_MPRV, KC_MNXT, TO(2), KC_HOME, KC_PGDN, KC_PGUP, KC_END ), [2] = LAYOUT( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_7, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_SPC, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_SPC, KC_SPC, KC_SPC, KC_NO, KC_NO, TO(3), KC_NO, KC_NO, KC_LALT, KC_TAB ), [3] = LAYOUT( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_TAB, KC_A, KC_W, KC_E, KC_R, KC_T, KC_H, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, - KC_LSFT, KC_Z, KC_S, KC_D, KC_F, KC_G, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_LSFT, KC_Z, KC_S, KC_D, KC_F, KC_G, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_LCTL, KC_NO, KC_X, KC_C, KC_V, KC_B, KC_M, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_SPC, KC_SPC, KC_Q, KC_NO, KC_NO, TO(0), KC_NO, KC_NO, KC_LALT, KC_TAB ) }; - - - \ No newline at end of file diff --git a/keyboards/handwired/myskeeb/myskeeb.h b/keyboards/handwired/myskeeb/myskeeb.h index 60762a35cd..208258b77b 100644 --- a/keyboards/handwired/myskeeb/myskeeb.h +++ b/keyboards/handwired/myskeeb/myskeeb.h @@ -1,21 +1,23 @@ #include "quantum.h" +#define XXX KC_NO + #define LAYOUT( \ - L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \ - L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \ - L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \ - L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36, \ - L40, L41, L42, L43, L44, L45, L46, R40, R41, R42, R43, R44, R45, R46 \ + L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \ + L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \ + L20, L21, L22, L23, L24, L25, R21, R22, R23, R24, R25, R26, \ + L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36, \ + L40, L41, L42, L43, L44, L45, L46, R40, R41, R42, R43, R44, R45, R46 \ ) \ { \ { L00, L01, L02, L03, L04, L05, L06 }, \ { L10, L11, L12, L13, L14, L15, L16 }, \ - { L20, L21, L22, L23, L24, L25, L26 }, \ + { L20, L21, L22, L23, L24, L25, XXX }, \ { L30, L31, L32, L33, L34, L35, L36 }, \ { L40, L41, L42, L43, L44, L45, L46 }, \ { R00, R01, R02, R03, R04, R05, R06 }, \ { R10, R11, R12, R13, R14, R15, R16 }, \ - { R20, R21, R22, R23, R24, R25, R26 }, \ + { XXX, R21, R22, R23, R24, R25, R26 }, \ { R30, R31, R32, R33, R34, R35, R36 }, \ { R40, R41, R42, R43, R44, R45, R46 } \ } diff --git a/keyboards/handwired/myskeeb/readme.md b/keyboards/handwired/myskeeb/readme.md index 80be57e4b6..ddc326fe3e 100644 --- a/keyboards/handwired/myskeeb/readme.md +++ b/keyboards/handwired/myskeeb/readme.md @@ -1,11 +1,18 @@ # myskeeb +![](https://i.imgur.com/ojGvzrbh.jpg) + Handwired Keyboard based on the Ergodash, with an OLED similar to Kyria. * Keyboard Maintainer: [su8044](https://github.com/su8044) +* Hardware Supported: Pro Micro (ATmega32U4) Make example for this keyboard (after setting up your build environment): make handwired/myskeeb:default +Flashing example for this keyboard: + + make handwired/myskeeb:default:flash + See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). From 6f3861fac537a9424f8b8a7b735f1afafe9b4755 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Tue, 16 Nov 2021 17:44:49 -0800 Subject: [PATCH 503/595] [Keyboard] Fix oled_task_user for ffkeebs/puca (#15185) --- keyboards/ffkeebs/puca/puca.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/keyboards/ffkeebs/puca/puca.c b/keyboards/ffkeebs/puca/puca.c index e08ac0cb3b..d131b97f7c 100644 --- a/keyboards/ffkeebs/puca/puca.c +++ b/keyboards/ffkeebs/puca/puca.c @@ -29,7 +29,8 @@ bool encoder_update_kb(uint8_t index, bool clockwise) { // OLED #ifdef OLED_ENABLE __attribute__((weak)) oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_270; } -__attribute__((weak)) void oled_task_user(void) { +bool oled_task_kb(void) { + if (!oled_task_user()) { return false; } // WPM-responsive animation stuff here # define IDLE_FRAMES 2 # define ANIM_FRAME_DURATION 400 // how long each frame lasts in ms @@ -105,7 +106,7 @@ __attribute__((weak)) void oled_task_user(void) { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }}; - + void animation_phase(void) { current_idle_frame = (current_idle_frame + 1) % IDLE_FRAMES; oled_write_raw_P(idle[abs((IDLE_FRAMES - 1) - current_idle_frame)], ANIM_SIZE); @@ -114,7 +115,7 @@ __attribute__((weak)) void oled_task_user(void) { anim_timer = timer_read32(); animation_phase(); } - + oled_set_cursor(0, 6); oled_write_P(PSTR("PUCA\nPAD\n"), false); oled_write_P(PSTR("-----\n"), false); @@ -129,5 +130,6 @@ __attribute__((weak)) void oled_task_user(void) { oled_write_P(PSTR("FUNC\n"), false); break; } + return true; } -#endif \ No newline at end of file +#endif From 9ca0cd81bf8a14c60a0957137d0cb94d9b07aaf8 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Tue, 16 Nov 2021 17:45:06 -0800 Subject: [PATCH 504/595] [Keyboard] Fix handful of boards compiling too large due to RGB matrix changes (#15184) --- keyboards/dztech/dz60rgb_ansi/v2/rules.mk | 2 ++ keyboards/melgeek/mojo68/config.h | 5 ++--- keyboards/work_louder/loop/rules.mk | 1 + 3 files changed, 5 insertions(+), 3 deletions(-) diff --git a/keyboards/dztech/dz60rgb_ansi/v2/rules.mk b/keyboards/dztech/dz60rgb_ansi/v2/rules.mk index 41fdb211ed..8318468880 100644 --- a/keyboards/dztech/dz60rgb_ansi/v2/rules.mk +++ b/keyboards/dztech/dz60rgb_ansi/v2/rules.mk @@ -22,3 +22,5 @@ AUDIO_ENABLE = no # Audio output RGB_MATRIX_ENABLE = yes # Use RGB matrix RGB_MATRIX_DRIVER = IS31FL3733 NO_USB_STARTUP_CHECK = no # Disable initialization only when usb is plugged in + +LTO_ENABLE = yes diff --git a/keyboards/melgeek/mojo68/config.h b/keyboards/melgeek/mojo68/config.h index 29f25874de..15ea1a58b4 100755 --- a/keyboards/melgeek/mojo68/config.h +++ b/keyboards/melgeek/mojo68/config.h @@ -70,9 +70,8 @@ # define ENABLE_RGB_MATRIX_HUE_BREATHING # define ENABLE_RGB_MATRIX_HUE_PENDULUM # define ENABLE_RGB_MATRIX_HUE_WAVE -# define ENABLE_RGB_MATRIX_PIXEL_RAIN -# define ENABLE_RGB_MATRIX_PIXEL_FLOW -# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// # define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +// # define ENABLE_RGB_MATRIX_PIXEL_RAIN // enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined # define ENABLE_RGB_MATRIX_TYPING_HEATMAP # define ENABLE_RGB_MATRIX_DIGITAL_RAIN diff --git a/keyboards/work_louder/loop/rules.mk b/keyboards/work_louder/loop/rules.mk index 0bad9d2d50..c0151377ed 100644 --- a/keyboards/work_louder/loop/rules.mk +++ b/keyboards/work_louder/loop/rules.mk @@ -22,5 +22,6 @@ AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes RGB_MATRIX_ENABLE = yes RGB_MATRIX_DRIVER = WS2812 +LTO_ENABLE = yes SRC += encoder_actions.c rgb_functions.c From 596511a959269097d640cf59fa0ad6ddb376b674 Mon Sep 17 00:00:00 2001 From: drhigsby <71532157+drhigsby@users.noreply.github.com> Date: Tue, 16 Nov 2021 18:58:32 -0800 Subject: [PATCH 505/595] [Keyboard] Packrat (#14574) Co-authored-by: Drashna Jaelre Co-authored-by: Ryan --- keyboards/packrat/config.h | 59 +++++++++++++ keyboards/packrat/info.json | 26 ++++++ keyboards/packrat/keymaps/3uc/config.h | 19 +++++ keyboards/packrat/keymaps/3uc/keymap.c | 92 +++++++++++++++++++++ keyboards/packrat/keymaps/3uc/readme.md | 1 + keyboards/packrat/keymaps/3uc/rules.mk | 1 + keyboards/packrat/keymaps/default/config.h | 19 +++++ keyboards/packrat/keymaps/default/keymap.c | 81 ++++++++++++++++++ keyboards/packrat/keymaps/default/readme.md | 3 + keyboards/packrat/keymaps/default/rules.mk | 1 + keyboards/packrat/packrat.c | 28 +++++++ keyboards/packrat/packrat.h | 79 ++++++++++++++++++ keyboards/packrat/readme.md | 25 ++++++ keyboards/packrat/rules.mk | 23 ++++++ 14 files changed, 457 insertions(+) create mode 100644 keyboards/packrat/config.h create mode 100644 keyboards/packrat/info.json create mode 100644 keyboards/packrat/keymaps/3uc/config.h create mode 100644 keyboards/packrat/keymaps/3uc/keymap.c create mode 100644 keyboards/packrat/keymaps/3uc/readme.md create mode 100644 keyboards/packrat/keymaps/3uc/rules.mk create mode 100644 keyboards/packrat/keymaps/default/config.h create mode 100644 keyboards/packrat/keymaps/default/keymap.c create mode 100644 keyboards/packrat/keymaps/default/readme.md create mode 100644 keyboards/packrat/keymaps/default/rules.mk create mode 100644 keyboards/packrat/packrat.c create mode 100644 keyboards/packrat/packrat.h create mode 100644 keyboards/packrat/readme.md create mode 100644 keyboards/packrat/rules.mk diff --git a/keyboards/packrat/config.h b/keyboards/packrat/config.h new file mode 100644 index 0000000000..c69ecdafcb --- /dev/null +++ b/keyboards/packrat/config.h @@ -0,0 +1,59 @@ +/* Copyright 2021 drhigsby + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define MANUFACTURER DrHigsby +#define PRODUCT Packrat +#define VENDOR_ID 0x0007 +#define PRODUCT_ID 0x0004 +#define DEVICE_VER 0x0001 + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 11 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ + +/* key matrix pins */ +#define MATRIX_ROW_PINS { F7, B1, B6, B2 } +#define MATRIX_COL_PINS { D3, D2, D1, D0, D4, C6, D7, E6, B4, B5, B3 } +#define UNUSED_PINS { F6 } + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +#define ENCODERS_PAD_A { F5 } +#define ENCODERS_PAD_B { F4 } diff --git a/keyboards/packrat/info.json b/keyboards/packrat/info.json new file mode 100644 index 0000000000..e4e3d869f1 --- /dev/null +++ b/keyboards/packrat/info.json @@ -0,0 +1,26 @@ +{ + "keyboard_name": "packrat", + "url": "http://www.keyboard-layout-editor.com/#/gists/43d838a3b2e0344d75dd67abfc508038", + "maintainer": "drhigsby", + "layouts": { + "LAYOUT_3uc": { + "layout": [{"label":"Q", "x":0, "y":0}, {"label":"W", "x":1, "y":0}, {"label":"E", "x":2, "y":0}, {"label":"R", "x":3, "y":0}, {"label":"T", "x":4, "y":0}, {"label":"KNOB!", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"label":"A", "x":0, "y":1}, {"label":"S", "x":1, "y":1}, {"label":"D", "x":2, "y":1}, {"label":"F", "x":3, "y":1}, {"label":"G", "x":4, "y":1}, {"label":"Any", "x":5, "y":1}, {"label":"H", "x":6, "y":1}, {"label":"J", "x":7, "y":1}, {"label":"K", "x":8, "y":1}, {"label":"L", "x":9, "y":1}, {"label":":", "x":10, "y":1}, {"label":"Z", "x":0, "y":2}, {"label":"X", "x":1, "y":2}, {"label":"C", "x":2, "y":2}, {"label":"V", "x":3, "y":2}, {"label":"B", "x":4, "y":2}, {"label":"Any", "x":5, "y":2}, {"label":"N", "x":6, "y":2}, {"label":"M", "x":7, "y":2}, {"label":"<", "x":8, "y":2}, {"label":">", "x":9, "y":2}, {"label":"?", "x":10, "y":2}, {"label":"Ctrl", "x":0.5, "y":3, "w":1.25}, {"label":"Alt", "x":1.75, "y":3, "w":1.25}, {"label":"Raise", "x":3, "y":3}, {"label":"", "x":4, "y":3, "w":3}, {"label":"Lower", "x":7, "y":3}, {"label":"Win", "x":8, "y":3, "w":1.25}, {"label":"Fn", "x":9.25, "y":3, "w":1.25}] + }, + + "LAYOUT_2x2uc": { + "layout": [{"label":"Q", "x":0, "y":0}, {"label":"W", "x":1, "y":0}, {"label":"E", "x":2, "y":0}, {"label":"R", "x":3, "y":0}, {"label":"T", "x":4, "y":0}, {"label":"KNOB!", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"label":"A", "x":0, "y":1}, {"label":"S", "x":1, "y":1}, {"label":"D", "x":2, "y":1}, {"label":"F", "x":3, "y":1}, {"label":"G", "x":4, "y":1}, {"label":"Any", "x":5, "y":1}, {"label":"H", "x":6, "y":1}, {"label":"J", "x":7, "y":1}, {"label":"K", "x":8, "y":1}, {"label":"L", "x":9, "y":1}, {"label":":", "x":10, "y":1}, {"label":"Z", "x":0, "y":2}, {"label":"X", "x":1, "y":2}, {"label":"C", "x":2, "y":2}, {"label":"V", "x":3, "y":2}, {"label":"B", "x":4, "y":2}, {"label":"Any", "x":5, "y":2}, {"label":"N", "x":6, "y":2}, {"label":"M", "x":7, "y":2}, {"label":"<", "x":8, "y":2}, {"label":">", "x":9, "y":2}, {"label":"?", "x":10, "y":2}, {"label":"Ctrl", "x":0.5, "y":3, "w":1.25}, {"label":"Alt", "x":1.75, "y":3, "w":1.25}, {"label":"", "x":3, "y":3, "w":2}, {"label":"Any", "x":5, "y":3}, {"label":"", "x":6, "y":3, "w":2}, {"label":"Win", "x":8, "y":3, "w":1.25}, {"label":"Fn", "x":9.25, "y":3, "w":1.25}] + }, + + "LAYOUT_7uc": { + "layout": [{"label":"Q", "x":0, "y":0}, {"label":"W", "x":1, "y":0}, {"label":"E", "x":2, "y":0}, {"label":"R", "x":3, "y":0}, {"label":"T", "x":4, "y":0}, {"label":"KNOB!", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"label":"A", "x":0, "y":1}, {"label":"S", "x":1, "y":1}, {"label":"D", "x":2, "y":1}, {"label":"F", "x":3, "y":1}, {"label":"G", "x":4, "y":1}, {"label":"Any", "x":5, "y":1}, {"label":"H", "x":6, "y":1}, {"label":"J", "x":7, "y":1}, {"label":"K", "x":8, "y":1}, {"label":"L", "x":9, "y":1}, {"label":":", "x":10, "y":1}, {"label":"Z", "x":0, "y":2}, {"label":"X", "x":1, "y":2}, {"label":"C", "x":2, "y":2}, {"label":"V", "x":3, "y":2}, {"label":"B", "x":4, "y":2}, {"label":"Any", "x":5, "y":2}, {"label":"N", "x":6, "y":2}, {"label":"M", "x":7, "y":2}, {"label":"<", "x":8, "y":2}, {"label":">", "x":9, "y":2}, {"label":"?", "x":10, "y":2}, {"label":"Ctrl", "x":0.5, "y":3, "w":1.5}, {"label":"", "x":2, "y":3, "w":7}, {"label":"Alt", "x":9, "y":3, "w":1.5}] + }, + + "LAYOUT_2x3uc": { + "layout": [{"label":"Q", "x":0, "y":0}, {"label":"W", "x":1, "y":0}, {"label":"E", "x":2, "y":0}, {"label":"R", "x":3, "y":0}, {"label":"T", "x":4, "y":0}, {"label":"KNOB!", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"label":"A", "x":0, "y":1}, {"label":"S", "x":1, "y":1}, {"label":"D", "x":2, "y":1}, {"label":"F", "x":3, "y":1}, {"label":"G", "x":4, "y":1}, {"label":"Any", "x":5, "y":1}, {"label":"H", "x":6, "y":1}, {"label":"J", "x":7, "y":1}, {"label":"K", "x":8, "y":1}, {"label":"L", "x":9, "y":1}, {"label":":", "x":10, "y":1}, {"label":"Z", "x":0, "y":2}, {"label":"X", "x":1, "y":2}, {"label":"C", "x":2, "y":2}, {"label":"V", "x":3, "y":2}, {"label":"B", "x":4, "y":2}, {"label":"Any", "x":5, "y":2}, {"label":"N", "x":6, "y":2}, {"label":"M", "x":7, "y":2}, {"label":"<", "x":8, "y":2}, {"label":">", "x":9, "y":2}, {"label":"?", "x":10, "y":2}, {"label":"Ctrl", "x":0.5, "y":3}, {"label":"Alt", "x":1.5, "y":3}, {"label":"", "x":2.5, "y":3, "w":3}, {"label":"", "x":5.5, "y":3, "w":3}, {"label":"Win", "x":8.5, "y":3}, {"label":"Fn", "x":9.5, "y":3}] + }, + + "LAYOUT_6uc": { + "layout": [{"label":"Q", "x":0, "y":0}, {"label":"W", "x":1, "y":0}, {"label":"E", "x":2, "y":0}, {"label":"R", "x":3, "y":0}, {"label":"T", "x":4, "y":0}, {"label":"KNOB!", "x":5, "y":0}, {"label":"Y", "x":6, "y":0}, {"label":"U", "x":7, "y":0}, {"label":"I", "x":8, "y":0}, {"label":"O", "x":9, "y":0}, {"label":"P", "x":10, "y":0}, {"label":"A", "x":0, "y":1}, {"label":"S", "x":1, "y":1}, {"label":"D", "x":2, "y":1}, {"label":"F", "x":3, "y":1}, {"label":"G", "x":4, "y":1}, {"label":"Any", "x":5, "y":1}, {"label":"H", "x":6, "y":1}, {"label":"J", "x":7, "y":1}, {"label":"K", "x":8, "y":1}, {"label":"L", "x":9, "y":1}, {"label":":", "x":10, "y":1}, {"label":"Z", "x":0, "y":2}, {"label":"X", "x":1, "y":2}, {"label":"C", "x":2, "y":2}, {"label":"V", "x":3, "y":2}, {"label":"B", "x":4, "y":2}, {"label":"Any", "x":5, "y":2}, {"label":"N", "x":6, "y":2}, {"label":"M", "x":7, "y":2}, {"label":"<", "x":8, "y":2}, {"label":">", "x":9, "y":2}, {"label":"?", "x":10, "y":2}, {"label":"Ctrl", "x":0.5, "y":3}, {"label":"Alt", "x":1.5, "y":3}, {"label":"", "x":2.5, "y":3, "w":6}, {"label":"Win", "x":8.5, "y":3}, {"label":"Fn", "x":9.5, "y":3}] + } + } +} diff --git a/keyboards/packrat/keymaps/3uc/config.h b/keyboards/packrat/keymaps/3uc/config.h new file mode 100644 index 0000000000..9ff2d89acc --- /dev/null +++ b/keyboards/packrat/keymaps/3uc/config.h @@ -0,0 +1,19 @@ +/* Copyright 2021 drhigsby + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#define COMBO_COUNT 7 +#define COMBO_TERM 40 diff --git a/keyboards/packrat/keymaps/3uc/keymap.c b/keyboards/packrat/keymaps/3uc/keymap.c new file mode 100644 index 0000000000..f037a47acb --- /dev/null +++ b/keyboards/packrat/keymaps/3uc/keymap.c @@ -0,0 +1,92 @@ +/* Copyright 2021 drhigsby + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +enum layers{ + _BASE, + _CODE, + _MATH, + _FUNC +}; + +enum combo_events { + combo_ESC, + combo_BACK, + combo_TAB, + combo_DELETE, + combo_ENTER, + combo_LPRN, + combo_RPRN, +}; + +const uint16_t PROGMEM esc_combo[] = {KC_Q, KC_W, COMBO_END}; +const uint16_t PROGMEM bspc_combo[] = {KC_O, KC_P, COMBO_END}; +const uint16_t PROGMEM tab_combo[] = {KC_A, KC_S, COMBO_END}; +const uint16_t PROGMEM del_combo[] = {KC_I, KC_O, COMBO_END}; +const uint16_t PROGMEM enter_combo[] = {KC_L, KC_SCLN, COMBO_END}; +const uint16_t PROGMEM lprn_combo[] = {KC_X, KC_C, COMBO_END}; +const uint16_t PROGMEM rprn_combo[] = {KC_COMM, KC_DOT, COMBO_END}; + + +combo_t key_combos[COMBO_COUNT] = { + [combo_ESC] = COMBO(esc_combo, KC_ESC), + [combo_BACK] = COMBO(bspc_combo, KC_BSPC), + [combo_TAB] = COMBO(tab_combo, KC_TAB), + [combo_DELETE] = COMBO(del_combo, KC_DEL), + [combo_ENTER] = COMBO(enter_combo, KC_ENT), + [combo_LPRN] = COMBO(lprn_combo, KC_LPRN), + [combo_RPRN] = COMBO(rprn_combo, KC_RPRN), +}; + +#define BASE TO(_BASE) +#define CODE MO(_CODE) +#define MATH TG(_MATH) +#define FUNC MO(_FUNC) +#define xxx KC_TRNS + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_3uc( + KC_Q, KC_W, KC_E, KC_R, KC_T, MATH, KC_Y, KC_U, KC_I, KC_O, KC_P, + KC_A, KC_S, KC_D, KC_F, KC_G, KC_HOME, KC_H, KC_J, KC_K, KC_L, KC_SCLN, + LSFT_T(KC_Z), KC_X, KC_C, KC_V, KC_B, KC_END, KC_N, KC_M, KC_COMM, KC_DOT, RSFT_T(KC_SLSH), + KC_LALT, KC_LCTL, CODE, KC_SPC, CODE, KC_RGUI, FUNC + ), + + [_CODE] = LAYOUT_3uc( + KC_1, KC_2, KC_3, KC_4, KC_5, xxx, KC_6, KC_7, KC_8, KC_9, KC_0, + KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_PGUP, KC_CIRC, KC_AMPR, KC_ASTR, KC_MINS, KC_EQL, + KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, xxx, KC_PGDN, xxx, KC_PIPE, KC_BSLS, KC_DQUO, KC_QUOT, + xxx, xxx, xxx, xxx, xxx, KC_PGUP, KC_PGDN + ), + + [_MATH] = LAYOUT_3uc( + xxx, xxx, xxx, xxx, xxx, BASE, xxx, KC_P7, KC_P8, KC_P9, KC_PPLS, + xxx, xxx, xxx, xxx, xxx, xxx, xxx, KC_P4, KC_P5, KC_P6, KC_PCMM, + xxx, xxx, xxx, xxx, xxx, xxx, xxx, KC_P1, KC_P2, KC_P3, KC_PEQL, + xxx, xxx, xxx, xxx, KC_P0, KC_PDOT, KC_PENT + + ), + + [_FUNC] = LAYOUT_3uc( + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, xxx, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, + xxx, xxx, xxx, xxx, xxx, xxx, xxx, xxx, xxx, KC_F11, KC_F12, + xxx, xxx, xxx, xxx, xxx, xxx, xxx, xxx, xxx, xxx, xxx, + xxx, xxx, xxx, xxx, xxx, xxx, xxx + ) + +}; + diff --git a/keyboards/packrat/keymaps/3uc/readme.md b/keyboards/packrat/keymaps/3uc/readme.md new file mode 100644 index 0000000000..603f82a812 --- /dev/null +++ b/keyboards/packrat/keymaps/3uc/readme.md @@ -0,0 +1 @@ +# Centered 3uC Packrat Keymap diff --git a/keyboards/packrat/keymaps/3uc/rules.mk b/keyboards/packrat/keymaps/3uc/rules.mk new file mode 100644 index 0000000000..ab1e438182 --- /dev/null +++ b/keyboards/packrat/keymaps/3uc/rules.mk @@ -0,0 +1 @@ +COMBO_ENABLE = yes diff --git a/keyboards/packrat/keymaps/default/config.h b/keyboards/packrat/keymaps/default/config.h new file mode 100644 index 0000000000..9ff2d89acc --- /dev/null +++ b/keyboards/packrat/keymaps/default/config.h @@ -0,0 +1,19 @@ +/* Copyright 2021 drhigsby + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#define COMBO_COUNT 7 +#define COMBO_TERM 40 diff --git a/keyboards/packrat/keymaps/default/keymap.c b/keyboards/packrat/keymaps/default/keymap.c new file mode 100644 index 0000000000..74df6a73e6 --- /dev/null +++ b/keyboards/packrat/keymaps/default/keymap.c @@ -0,0 +1,81 @@ +/* Copyright 2021 drhigsby + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +enum layers{ + _BASE, + _CODE, + _FUNC +}; + +enum combo_events { + combo_ESC, + combo_BACK, + combo_TAB, + combo_DELETE, + combo_ENTER, + combo_LPRN, + combo_RPRN, +}; + +const uint16_t PROGMEM esc_combo[] = {KC_Q, KC_W, COMBO_END}; +const uint16_t PROGMEM bspc_combo[] = {KC_O, KC_P, COMBO_END}; +const uint16_t PROGMEM tab_combo[] = {KC_A, KC_S, COMBO_END}; +const uint16_t PROGMEM del_combo[] = {KC_I, KC_O, COMBO_END}; +const uint16_t PROGMEM enter_combo[] = {KC_L, KC_SCLN, COMBO_END}; +const uint16_t PROGMEM lprn_combo[] = {KC_X, KC_C, COMBO_END}; +const uint16_t PROGMEM rprn_combo[] = {KC_COMM, KC_DOT, COMBO_END}; + + +combo_t key_combos[COMBO_COUNT] = { + [combo_ESC] = COMBO(esc_combo, KC_ESC), + [combo_BACK] = COMBO(bspc_combo, KC_BSPC), + [combo_TAB] = COMBO(tab_combo, KC_TAB), + [combo_DELETE] = COMBO(del_combo, KC_DEL), + [combo_ENTER] = COMBO(enter_combo, KC_ENT), + [combo_LPRN] = COMBO(lprn_combo, KC_LPRN), + [combo_RPRN] = COMBO(rprn_combo, KC_RPRN), +}; + +#define CODE MO(_CODE) +#define FUNC MO(_FUNC) +#define xxx KC_TRNS + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT_2x3uc( + KC_Q, KC_W, KC_E, KC_R, KC_T, KC_DEL, KC_Y, KC_U, KC_I, KC_O, KC_P, + KC_A, KC_S, KC_D, KC_F, KC_G, KC_HOME, KC_H, KC_J, KC_K, KC_L, KC_SCLN, + LSFT_T(KC_Z), KC_X, KC_C, KC_V, KC_B, KC_END, KC_N, KC_M, KC_COMM, KC_DOT, RSFT_T(KC_SLSH), + KC_LCTL, KC_LALT, CODE, KC_SPC, KC_RGUI, FUNC + ), + + [_CODE] = LAYOUT_2x3uc( + KC_1, KC_2, KC_3, KC_4, KC_5, KC_GRV, KC_6, KC_7, KC_8, KC_9, KC_0, + KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CAPS, KC_CIRC, KC_AMPR, KC_ASTR, KC_MINS, KC_EQL, + KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, xxx, xxx, xxx, KC_PIPE, KC_BSLS, KC_DQUO, KC_QUOT, + xxx, xxx, xxx, xxx, KC_PGUP, KC_PGDN + ), + + [_FUNC] = LAYOUT_2x3uc( + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, xxx, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, + xxx, xxx, xxx, xxx, xxx, xxx, xxx, xxx, xxx, KC_F11, KC_F12, + xxx, xxx, xxx, xxx, xxx, xxx, xxx, xxx, xxx, xxx, xxx, + xxx, xxx, xxx, xxx, xxx, xxx + ) + +}; + diff --git a/keyboards/packrat/keymaps/default/readme.md b/keyboards/packrat/keymaps/default/readme.md new file mode 100644 index 0000000000..3e6ed27b57 --- /dev/null +++ b/keyboards/packrat/keymaps/default/readme.md @@ -0,0 +1,3 @@ +# Default Packrat Keymap + +The default Packrat Keymap uses the 2x3uC layout. diff --git a/keyboards/packrat/keymaps/default/rules.mk b/keyboards/packrat/keymaps/default/rules.mk new file mode 100644 index 0000000000..ab1e438182 --- /dev/null +++ b/keyboards/packrat/keymaps/default/rules.mk @@ -0,0 +1 @@ +COMBO_ENABLE = yes diff --git a/keyboards/packrat/packrat.c b/keyboards/packrat/packrat.c new file mode 100644 index 0000000000..0f4a479956 --- /dev/null +++ b/keyboards/packrat/packrat.c @@ -0,0 +1,28 @@ +/* Copyright 2021 drhigsby + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "packrat.h" + +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + if (index == 0) { + if (clockwise) { + tap_code_delay(KC_VOLU, 10); + } else { + tap_code_delay(KC_VOLD, 10); + } + } + return true; +} diff --git a/keyboards/packrat/packrat.h b/keyboards/packrat/packrat.h new file mode 100644 index 0000000000..91d0af7b7a --- /dev/null +++ b/keyboards/packrat/packrat.h @@ -0,0 +1,79 @@ +/* Copyright 2021 drhigsby + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +#define LAYOUT_3uc( \ + k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, \ + k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, \ + k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, \ + k301, k302, k303, k305, k307, k308, k309 \ +) { \ + { k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010 }, \ + { k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110 }, \ + { k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210 }, \ + { KC_NO, k301, k302, k303, KC_NO, k305, KC_NO, k307, k308, k309 } \ +} + +#define LAYOUT_2x2uc( \ + k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, \ + k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, \ + k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, \ + k301, k302, k303, k305, k307, k308, k309 \ +) { \ + { k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010 }, \ + { k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110 }, \ + { k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210 }, \ + { KC_NO, k301, k302, k303, KC_NO, k305, KC_NO, k307, k308, k309 } \ +} + +#define LAYOUT_7uc( \ + k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, \ + k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, \ + k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, \ + k301, k305, k309 \ +) { \ + { k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010 }, \ + { k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110 }, \ + { k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210 }, \ + { KC_NO, k301, KC_NO, KC_NO, KC_NO, k305, KC_NO, KC_NO, KC_NO, k309 } \ +} + +#define LAYOUT_2x3uc( \ + k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, \ + k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, \ + k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, \ + k301, k302, k303, k307, k308, k309 \ +) { \ + { k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010 }, \ + { k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110 }, \ + { k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210 }, \ + { KC_NO, k301, k302, k303, KC_NO, KC_NO, KC_NO, k307, k308, k309 } \ +} + +#define LAYOUT_6uc( \ + k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, \ + k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, \ + k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, \ + k301, k302, k305, k308, k309 \ +) { \ + { k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010 }, \ + { k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110 }, \ + { k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210 }, \ + { KC_NO, k301, k302, KC_NO, KC_NO, k305, KC_NO, KC_NO, k308, k309 } \ +} diff --git a/keyboards/packrat/readme.md b/keyboards/packrat/readme.md new file mode 100644 index 0000000000..a53377f870 --- /dev/null +++ b/keyboards/packrat/readme.md @@ -0,0 +1,25 @@ +# Packrat + +![Packrat](https://i.imgur.com/t6vWYIbh.jpeg) + +Full Gallery: https://imgur.com/gallery/fZklCG6 + +Packrat is an 11u wide ortholinear keyboard featuring multiple bottom row options and top-centered rotary encoder support. + +* Keyboard Maintainer: [H. Bond](https://github.com/drhigsby) +* Hardware Supported: Packrat (https://github.com/drhigsby/packrat) +* Hardware Availability: cases available at TBD / make your own + +Make example for this keyboard (after setting up your build environment): + + make packrat:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead +* **Keycode in layout**: Press the key mapped to `RESET` if it is available diff --git a/keyboards/packrat/rules.mk b/keyboards/packrat/rules.mk new file mode 100644 index 0000000000..d43cd106b6 --- /dev/null +++ b/keyboards/packrat/rules.mk @@ -0,0 +1,23 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = caterina + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +LTO_ENABLE = no # Use link time optimization +ENCODER_ENABLE = yes From 3d49069a46b42d2a0e4d8b7537ac4ccf41e6402d Mon Sep 17 00:00:00 2001 From: Alexis Jeandeau Date: Wed, 17 Nov 2021 11:59:03 +0900 Subject: [PATCH 506/595] [Keyboard] Add SOFT/HRUF Splitography keyboard (#15133) --- keyboards/splitography/config.h | 55 +++ keyboards/splitography/info.json | 302 +++++++++++++ .../splitography/keymaps/default/keymap.c | 291 +++++++++++++ .../splitography/keymaps/default/readme.md | 14 + .../keymap.c | 291 +++++++++++++ .../splitography/keymaps/dvorak/keymap.c | 291 +++++++++++++ .../splitography/keymaps/jeandeaual/keymap.c | 293 +++++++++++++ .../splitography/keymaps/jeandeaual/readme.md | 7 + keyboards/splitography/keymaps/multi/keymap.c | 411 ++++++++++++++++++ .../splitography/keymaps/multi/readme.md | 15 + keyboards/splitography/readme.md | 42 ++ keyboards/splitography/rules.mk | 5 + keyboards/splitography/splitography.c | 17 + keyboards/splitography/splitography.h | 33 ++ 14 files changed, 2067 insertions(+) create mode 100644 keyboards/splitography/config.h create mode 100644 keyboards/splitography/info.json create mode 100644 keyboards/splitography/keymaps/default/keymap.c create mode 100644 keyboards/splitography/keymaps/default/readme.md create mode 100644 keyboards/splitography/keymaps/default_with_ctl_shft_alt_switched/keymap.c create mode 100644 keyboards/splitography/keymaps/dvorak/keymap.c create mode 100644 keyboards/splitography/keymaps/jeandeaual/keymap.c create mode 100644 keyboards/splitography/keymaps/jeandeaual/readme.md create mode 100644 keyboards/splitography/keymaps/multi/keymap.c create mode 100644 keyboards/splitography/keymaps/multi/readme.md create mode 100644 keyboards/splitography/readme.md create mode 100644 keyboards/splitography/rules.mk create mode 100644 keyboards/splitography/splitography.c create mode 100644 keyboards/splitography/splitography.h diff --git a/keyboards/splitography/config.h b/keyboards/splitography/config.h new file mode 100644 index 0000000000..19afdec862 --- /dev/null +++ b/keyboards/splitography/config.h @@ -0,0 +1,55 @@ +/* Copyright 2021 Alexis Jeandeau + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define PRODUCT Splitography + +/* Key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 12 + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO diff --git a/keyboards/splitography/info.json b/keyboards/splitography/info.json new file mode 100644 index 0000000000..2d07607c29 --- /dev/null +++ b/keyboards/splitography/info.json @@ -0,0 +1,302 @@ +{ + "manufacturer": "SOFT/HRUF", + "keyboard_name": "Splitography", + "url": "https://softhruf.love/collections/writers", + "maintainer": "qmk", + "processor": "atmega32u4", + "diode_direction": "COL2ROW", + "features": { + "steno": true, + "nkro": true, + "bootmagic": true, + "mousekey": false, + "extrakey": true, + "console": false, + "audio": false, + "command": false, + "backlight": false + }, + "matrix_pins": { + "rows": ["D0", "D1", "D2", "D3"], + "cols": ["F0", "F1", "F4", "F5", "F6", "F7", "C7", "C6", "B6", "B5", "B4", "D7"] + }, + "usb": { + "vid": "0xFEED", + "pid": "0x6060", + "device_ver": "0x0001" + }, + "layouts": { + "LAYOUT": { + "layout": [ + { + "x": 0, + "y": 0, + "h": 0.6, + "matrix": [0, 0], + "label": "Esc" + }, + { + "x": 1, + "y": 0, + "h": 0.6, + "matrix": [0, 1], + "label": "Q" + }, + { + "x": 2, + "y": 0, + "h": 0.6, + "matrix": [0, 2], + "label": "W" + }, + { + "x": 3, + "y": 0, + "h": 0.6, + "matrix": [0, 3], + "label": "E" + }, + { + "x": 4, + "y": 0, + "h": 0.6, + "matrix": [0, 4], + "label": "R" + }, + { + "x": 5, + "y": 0, + "h": 0.6, + "matrix": [0, 5], + "label": "T" + }, + { + "x": 8, + "y": 0, + "h": 0.6, + "matrix": [0, 6], + "label": "Y" + }, + { + "x": 9, + "y": 0, + "h": 0.6, + "matrix": [0, 7], + "label": "U" + }, + { + "x": 10, + "y": 0, + "h": 0.6, + "matrix": [0, 8], + "label": "I" + }, + { + "x": 11, + "y": 0, + "h": 0.6, + "matrix": [0, 9], + "label": "O" + }, + { + "x": 12, + "y": 0, + "h": 0.6, + "matrix": [0, 10], + "label": "P" + }, + { + "x": 13, + "y": 0, + "h": 0.6, + "matrix": [0, 11], + "label": "Backspace" + }, + { + "x": 0, + "y": 0.6, + "matrix": [1, 0], + "label": "Alt" + }, + { + "x": 1, + "y": 0.6, + "matrix": [1, 1], + "label": "A" + }, + { + "x": 2, + "y": 0.6, + "matrix": [1, 2], + "label": "S" + }, + { + "x": 3, + "y": 0.6, + "matrix": [1, 3], + "label": "D" + }, + { + "x": 4, + "y": 0.6, + "matrix": [1, 4], + "label": "F" + }, + { + "x": 5, + "y": 0.6, + "matrix": [1, 5], + "label": "G" + }, + { + "x": 8, + "y": 0.6, + "matrix": [1, 6], + "label": "H" + }, + { + "x": 9, + "y": 0.6, + "matrix": [1, 7], + "label": "J" + }, + { + "x": 10, + "y": 0.6, + "matrix": [1, 8], + "label": "K" + }, + { + "x": 11, + "y": 0.6, + "matrix": [1, 9], + "label": "L" + }, + { + "x": 12, + "y": 0.6, + "matrix": [1, 10], + "label": ";" + }, + { + "x": 13, + "y": 0.6, + "matrix": [1, 11], + "label": "Enter" + }, + { + "x": 0, + "y": 1.6, + "h": 1.2, + "matrix": [2, 0], + "label": "Shift" + }, + { + "x": 1, + "y": 1.6, + "h": 1.2, + "matrix": [2, 1], + "label": "Z" + }, + { + "x": 2, + "y": 1.6, + "h": 1.2, + "matrix": [2, 2], + "label": "X" + }, + { + "x": 3, + "y": 1.6, + "h": 1.2, + "matrix": [2, 3], + "label": "C" + }, + { + "x": 4, + "y": 1.6, + "h": 1.2, + "matrix": [2, 4], + "label": "V" + }, + { + "x": 5, + "y": 1.6, + "h": 1.2, + "matrix": [2, 5], + "label": "B" + }, + { + "x": 8, + "y": 1.6, + "h": 1.2, + "matrix": [2, 6], + "label": "N" + }, + { + "x": 9, + "y": 1.6, + "h": 1.2, + "matrix": [2, 7], + "label": "M" + }, + { + "x": 10, + "y": 1.6, + "h": 1.2, + "matrix": [2, 8], + "label": "," + }, + { + "x": 11, + "y": 1.6, + "h": 1.2, + "matrix": [2, 9], + "label": "c" + }, + { + "x": 12, + "y": 1.6, + "h": 1.2, + "matrix": [2, 10], + "label": "/" + }, + { + "x": 13, + "y": 1.6, + "h": 1.2, + "matrix": [2, 11], + "label": "Super" + }, + { + "x": 3.5, + "y": 3, + "h": 1.2, + "matrix": [3, 4], + "label": "Orange" + }, + { + "x": 4.5, + "y": 3, + "h": 1.2, + "matrix": [3, 5], + "label": "Blue" + }, + { + "x": 8.5, + "y": 3, + "h": 1.2, + "matrix": [3, 6], + "label": "Space" + }, + { + "x": 9.5, + "y": 3, + "h": 1.2, + "matrix": [3, 7], + "label": "Ctrl" + } + ] + } + } +} diff --git a/keyboards/splitography/keymaps/default/keymap.c b/keyboards/splitography/keymaps/default/keymap.c new file mode 100644 index 0000000000..91304c5507 --- /dev/null +++ b/keyboards/splitography/keymaps/default/keymap.c @@ -0,0 +1,291 @@ +/* Copyright 2021 Alexis Jeandeau + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H +#include "keymap_steno.h" + +enum keyboard_layers { + _QWERTY = 0, + _GEMINI, + _PLOVER, + _BLUE, + _ORANGE, + _GREEN, + _NUM, + _END_LAYERS, +}; + +enum keyboard_keycodes { + QWERTY = SAFE_RANGE, + QWERTY1, + QWERTY2, + GEMINI, + PLOVER, + BLUE, + ORANGE, +}; + +#define COPY LCTL(KC_C) +#define CUT LCTL(KC_X) +#define PASTE LCTL(KC_V) +#define UNDO LCTL(KC_Z) +#define TG_NUM TG(_NUM) + +// clang-format off +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + // ...................................................................... Qwerty + // + // http://www.keyboard-layout-editor.com/#/gists/1b04ce6be0cee6e5d2998b2a8efb8b09 + + // ┌──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┐ + // │ Esc │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ Bksp │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Alt │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ Enter│ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Shift│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ GUI │ + // └──────┴──────┴──────┴──────┼──────┼──────┼──────┼──────┼──────┴──────┴──────┴──────┘ + // │Orange│ Blue │ Space│ Ctrl │ + // └──────┴──────┴──────┴──────┘ + + [_QWERTY] = LAYOUT( + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + KC_LALT, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT , + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LGUI, + ORANGE, BLUE, KC_SPC, KC_LCTL + ), + + // .................................................................. Blue Layer + // + // http://www.keyboard-layout-editor.com/#/gists/054b8bc0e31971bb962ea1c781232e0b + + // ┌──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┐ + // │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Alt │ Stop │ Prev │ Play │ Next │ +Vol │ │ │ │ [ │ ] │ ' │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Shift│ Undo │ Cut │ Copy │ Paste│ -Vol │ Mute │ │ │ - │ = │ GUI │ + // └──────┴──────┴──────┴──────┼──────┼──────┼──────┼──────┼──────┴──────┴──────┴──────┘ + // │Orange│ f() │ Del │ Ctrl │ + // └──────┴──────┴──────┴──────┘ + + [_BLUE] = LAYOUT( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, XXXXXXX, + KC_LALT, KC_MSTP, KC_MPRV, KC_MPLY, KC_MNXT, KC_VOLU, XXXXXXX, XXXXXXX, XXXXXXX, KC_LBRC, KC_RBRC, KC_QUOT, + KC_LSFT, UNDO, CUT, COPY, PASTE, KC_VOLD, KC_MUTE, XXXXXXX, XXXXXXX, KC_MINS, KC_EQL, KC_LGUI, + ORANGE, _______, KC_DEL, KC_LCTL + ), + + // ................................................................ Orange Layer + // + // http://www.keyboard-layout-editor.com/#/gists/83ccc7c3faa78b1f67f6fef65063a248 + + // ┌──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┐ + // │Plover│ F1 │ F2 │ F3 │ F4 │ │ App │ PrScr│ScrLck│ Pause│ │ │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Alt │ F5 │ F6 │ F7 │ F8 │ │ │Insert│ Home │ PgUp │ │ │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Shift│ F9 │ F10 │ F11 │ F12 │ │ │ Del │ End │ PgDn │ \ │ GUI │ + // └──────┴──────┴──────┴──────┼──────┼──────┼──────┼──────┼──────┴──────┴──────┴──────┘ + // │ f() │ Blue │ Tab │ Ctrl │ + // └──────┴──────┴──────┴──────┘ + + [_ORANGE] = LAYOUT( + PLOVER, KC_F1, KC_F2, KC_F3, KC_F4, XXXXXXX, KC_APP, KC_PSCR, KC_SLCK, KC_PAUS, XXXXXXX, XXXXXXX, + KC_LALT, KC_F5, KC_F6, KC_F7, KC_F8, XXXXXXX, XXXXXXX, KC_INS, KC_HOME, KC_PGUP, XXXXXXX, XXXXXXX, + KC_LSFT, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, XXXXXXX, KC_DEL, KC_END, KC_PGDN, KC_BSLS, KC_LGUI, + _______, BLUE, KC_TAB, KC_LCTL + ), + + // ................................................................. Green Layer + // + // http://www.keyboard-layout-editor.com/#/gists/bc7902f1eada4d7d34d3445aa1eccdab + + // ┌──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┐ + // │Gemini│ │ │ │ │Scroll│ / │ 7 │ 8 │ 9 │ - │ │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Alt │ Home │ Up │ End │ PgUp │ Caps │ * │ 4 │ 5 │ 6 │ + │ Enter│ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Shift│ Left │ Down │ Right│ PgDn │ Num │ 0 │ 1 │ 2 │ 3 │ │ GUI │ + // └──────┴──────┴──────┴──────┼──────┼──────┼──────┼──────┼──────┴──────┴──────┴──────┘ + // │ f() │ f() │ -- │ Ctrl │ + // └──────┴──────┴──────┴──────┘ + + [_GREEN] = LAYOUT( + GEMINI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SLCK, KC_PSLS, KC_P7, KC_P8, KC_P9, KC_MINS, XXXXXXX, + KC_LALT, KC_HOME, KC_UP, KC_END, KC_PGUP, KC_CAPS, KC_PAST, KC_P4, KC_P5, KC_P6, KC_PPLS, KC_ENT , + KC_LSFT, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, TG_NUM, KC_P0, KC_P1, KC_P2, KC_P3, XXXXXXX, KC_LGUI, + _______, _______, XXXXXXX, KC_LCTL + ), + + // ................................................................... Num Layer + // + // http://www.keyboard-layout-editor.com/#/gists/bc7902f1eada4d7d34d3445aa1eccdab + + // ┌──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┐ + // │ │ │ │ │ │ │ / │ 7 │ 8 │ 9 │ - │ │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Alt │ Home │ Up │ End │ PgUp │ │ * │ 4 │ 5 │ 6 │ + │ Enter│ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Shift│ Left │ Down │ Right│ PgDn │ f() │ 0 │ 1 │ 2 │ 3 │ │ GUI │ + // └──────┴──────┴──────┴──────┼──────┼──────┼──────┼──────┼──────┴──────┴──────┴──────┘ + // │ -- │ -- │ -- │ Ctrl │ + // └──────┴──────┴──────┴──────┘ + + [_NUM] = LAYOUT( + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_PSLS, KC_P7, KC_P8, KC_P9, KC_PMNS, XXXXXXX, + KC_LALT, KC_HOME, KC_UP, KC_END, KC_PGUP, XXXXXXX, KC_PAST, KC_P4, KC_P5, KC_P6, KC_PPLS, KC_ENT , + KC_LSFT, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, QWERTY, KC_P0, KC_P1, KC_P2, KC_P3, XXXXXXX, KC_LGUI, + XXXXXXX, XXXXXXX, XXXXXXX, KC_LCTL + ), + + // ...................................................................... Plover + // + // http://www.keyboard-layout-editor.com/#/gists/27b8f8649393a8ba4071ba946a9306f4 + + // ┌──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┐ + // │ 1 │ 1 │ 1 │ 1 │ 1 │ 1 │ 1 │ 1 │ 1 │ 1 │ 1 │ 1 │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │Qwerty│ S │ T │ P │ H │ * │ * │ F │ P │ L │ T │ D │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │Qwerty│ S │ K │ W │ R │ * │ * │ R │ B │ G │ S │ Z │ + // └──────┴──────┴──────┴──────┼──────┼──────┼──────┼──────┼──────┴──────┴──────┴──────┘ + // │ A │ O │ E │ U │ + // └──────┴──────┴──────┴──────┘ + + [_PLOVER] = LAYOUT( + KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1 , + QWERTY1, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, + QWERTY2, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_C, KC_V, KC_N, KC_M + ), + + // ...................................................................... Gemini + // + // http://www.keyboard-layout-editor.com/#/gists/27b8f8649393a8ba4071ba946a9306f4 + + // ┌──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┐ + // │ # │ # │ # │ # │ # │ # │ # │ # │ # │ # │ # │ # │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │Qwerty│ S │ T │ P │ H │ * │ * │ F │ P │ L │ T │ D │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │Qwerty│ S │ K │ W │ R │ * │ * │ R │ B │ G │ S │ Z │ + // └──────┴──────┴──────┴──────┼──────┼──────┼──────┼──────┼──────┴──────┴──────┴──────┘ + // │ A │ O │ E │ U │ + // └──────┴──────┴──────┴──────┘ + + [_GEMINI] = LAYOUT( + STN_N1, STN_N2, STN_N3, STN_N4, STN_N5, STN_N6, STN_N7, STN_N8, STN_N9, STN_NA, STN_NB, STN_NC , + QWERTY1, STN_S1, STN_TL, STN_PL, STN_HL, STN_ST1, STN_ST3, STN_FR, STN_PR, STN_LR, STN_TR, STN_DR , + QWERTY2, STN_S2, STN_KL, STN_WL, STN_RL, STN_ST2, STN_ST4, STN_RR, STN_BR, STN_GR, STN_SR, STN_ZR , + STN_A, STN_O, STN_E, STN_U + ), +}; +// clang-format on + +// ..................................................................... Keymaps + +#define QWERTY_1 1 +#define QWERTY_2 2 +#define QWERTY_12 3 +static uint8_t qwerty_n = 0; + +void qwerty(void) { + qwerty_n = 0; + layer_move(0); + set_single_persistent_default_layer(_QWERTY); +} + +void plover(keyrecord_t *record) { + if (record->event.pressed) { + layer_move(0); + layer_on(_PLOVER); + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } + keymap_config.raw = eeconfig_read_keymap(); + keymap_config.nkro = 1; + eeconfig_update_keymap(keymap_config.raw); + } +} + +void gemini(void) { + layer_move(0); + layer_on(_GEMINI); +} + +// ........................................................... User Keycode Trap + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + qwerty(); + } + return false; + case QWERTY1: + if (record->event.pressed) { + qwerty_n = qwerty_n | QWERTY_1; + if (qwerty_n == QWERTY_12) { + qwerty(); + } + } else { + qwerty_n = qwerty_n & ~QWERTY_1; + } + return false; + case QWERTY2: + if (record->event.pressed) { + qwerty_n = qwerty_n | QWERTY_2; + if (qwerty_n == QWERTY_12) { + qwerty(); + } + } else { + qwerty_n = qwerty_n & ~QWERTY_2; + } + return false; + case BLUE: + if (record->event.pressed) { + layer_on(_BLUE); + update_tri_layer(_BLUE, _ORANGE, _GREEN); + } else { + layer_off(_BLUE); + update_tri_layer(_BLUE, _ORANGE, _GREEN); + } + return false; + case ORANGE: + if (record->event.pressed) { + layer_on(_ORANGE); + update_tri_layer(_BLUE, _ORANGE, _GREEN); + } else { + layer_off(_ORANGE); + update_tri_layer(_BLUE, _ORANGE, _GREEN); + } + return false; + case PLOVER: + plover(record); + return false; + case GEMINI: + if (record->event.pressed) { + gemini(); + } + return false; + } + return true; +} + +// Initialize the steno protocol +void eeconfig_init_user(void) { + steno_set_mode(STENO_MODE_BOLT); // or STENO_MODE_GEMINI +} diff --git a/keyboards/splitography/keymaps/default/readme.md b/keyboards/splitography/keymaps/default/readme.md new file mode 100644 index 0000000000..b136d85efb --- /dev/null +++ b/keyboards/splitography/keymaps/default/readme.md @@ -0,0 +1,14 @@ +# [Guide](https://softhruf.love/pages/guides) + +[Splitography quick start video](https://www.youtube.com/watch?v=ru4cRQ2s_v0) + +A short video guide on how to set up the SOFT/HRUF Splitography, a mechanical keyboard intended for use with [Plover](https://www.openstenoproject.org/plover/). + +Here is a reference card for the standard keyboard layout: + +![Reference card](https://i.imgur.com/ywe8jXR.png) + +* While holding down a colored thumb key, the matching colored functions/characters on the remaining keys can be pressed. +* Bottom edge keys are accessed by holding down both keys. +* Numlock locks in the Numpad layer. +* Alt and Shift pressed simultaneously to return to the standard layout. diff --git a/keyboards/splitography/keymaps/default_with_ctl_shft_alt_switched/keymap.c b/keyboards/splitography/keymaps/default_with_ctl_shft_alt_switched/keymap.c new file mode 100644 index 0000000000..5297af4c76 --- /dev/null +++ b/keyboards/splitography/keymaps/default_with_ctl_shft_alt_switched/keymap.c @@ -0,0 +1,291 @@ +/* Copyright 2021 Alexis Jeandeau + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H +#include "keymap_steno.h" + +enum keyboard_layers { + _QWERTY = 0, + _TXBOLT, + _PLOVER, + _BLUE, + _ORANGE, + _GREEN, + _NUM, + _END_LAYERS, +}; + +enum keyboard_keycodes { + QWERTY = SAFE_RANGE, + QWERTY1, + QWERTY2, + TXBOLT, + PLOVER, + BLUE, + ORANGE, +}; + +#define COPY LCTL(KC_C) +#define CUT LCTL(KC_X) +#define PASTE LCTL(KC_V) +#define UNDO LCTL(KC_Z) +#define TG_NUM TG(_NUM) + +// clang-format off +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + // ...................................................................... Qwerty + // + // http://www.keyboard-layout-editor.com/#/gists/1b04ce6be0cee6e5d2998b2a8efb8b09 + + // ┌──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┐ + // │ Esc │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ Bksp │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Ctrl │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ Enter│ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Alt │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ GUI │ + // └──────┴──────┴──────┴──────┼──────┼──────┼──────┼──────┼──────┴──────┴──────┴──────┘ + // │Orange│ Blue │ Space│ Shift│ + // └──────┴──────┴──────┴──────┘ + + [_QWERTY] = LAYOUT( + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT , + KC_LALT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LGUI, + ORANGE, BLUE, KC_SPC, KC_LSFT + ), + + // .................................................................. Blue Layer + // + // http://www.keyboard-layout-editor.com/#/gists/054b8bc0e31971bb962ea1c781232e0b + + // ┌──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┐ + // │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Ctrl │ Stop │ Prev │ Play │ Next │ +Vol │ │ │ │ [ │ ] │ ' │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Alt │ Undo │ Cut │ Copy │ Paste│ -Vol │ Mute │ │ │ - │ = │ GUI │ + // └──────┴──────┴──────┴──────┼──────┼──────┼──────┼──────┼──────┴──────┴──────┴──────┘ + // │Orange│ f() │ Del │ Shift│ + // └──────┴──────┴──────┴──────┘ + + [_BLUE] = LAYOUT( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, XXXXXXX, + KC_LCTL, KC_MSTP, KC_MPRV, KC_MPLY, KC_MNXT, KC_VOLU, XXXXXXX, XXXXXXX, XXXXXXX, KC_LBRC, KC_RBRC, KC_QUOT, + KC_LALT, UNDO, CUT, COPY, PASTE, KC_VOLD, KC_MUTE, XXXXXXX, XXXXXXX, KC_MINS, KC_EQL, KC_LGUI, + ORANGE, _______, KC_DEL, KC_LSFT + ), + + // ................................................................ Orange Layer + // + // http://www.keyboard-layout-editor.com/#/gists/83ccc7c3faa78b1f67f6fef65063a248 + + // ┌──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┐ + // │Plover│ F1 │ F2 │ F3 │ F4 │ │ App │ PrScr│ScrLck│ Pause│ │ │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Ctrl │ F5 │ F6 │ F7 │ F8 │ │ │Insert│ Home │ PgUp │ │ │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Alt │ F9 │ F10 │ F11 │ F12 │ │ │ Del │ End │ PgDn │ \ │ GUI │ + // └──────┴──────┴──────┴──────┼──────┼──────┼──────┼──────┼──────┴──────┴──────┴──────┘ + // │ f() │ Blue │ Tab │ Shift│ + // └──────┴──────┴──────┴──────┘ + + [_ORANGE] = LAYOUT( + PLOVER, KC_F1, KC_F2, KC_F3, KC_F4, XXXXXXX, KC_APP, KC_PSCR, KC_SLCK, KC_PAUS, XXXXXXX, XXXXXXX, + KC_LCTL, KC_F5, KC_F6, KC_F7, KC_F8, XXXXXXX, XXXXXXX, KC_INS, KC_HOME, KC_PGUP, XXXXXXX, XXXXXXX, + KC_LALT, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, XXXXXXX, KC_DEL, KC_END, KC_PGDN, KC_BSLS, KC_LGUI, + _______, BLUE, KC_TAB, KC_LSFT + ), + + // ................................................................. Green Layer + // + // http://www.keyboard-layout-editor.com/#/gists/bc7902f1eada4d7d34d3445aa1eccdab + + // ┌──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┐ + // │TxBolt│ │ │ │ │Scroll│ / │ 7 │ 8 │ 9 │ - │ │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Ctrl │ Home │ Up │ End │ PgUp │ Caps │ * │ 4 │ 5 │ 6 │ + │ Enter│ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Alt │ Left │ Down │ Right│ PgDn │ Num │ 0 │ 1 │ 2 │ 3 │ │ GUI │ + // └──────┴──────┴──────┴──────┼──────┼──────┼──────┼──────┼──────┴──────┴──────┴──────┘ + // │ f() │ f() │ -- │ Shift│ + // └──────┴──────┴──────┴──────┘ + + [_GREEN] = LAYOUT( + TXBOLT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SLCK, KC_PSLS, KC_P7, KC_P8, KC_P9, KC_MINS, XXXXXXX, + KC_LCTL, KC_HOME, KC_UP, KC_END, KC_PGUP, KC_CAPS, KC_PAST, KC_P4, KC_P5, KC_P6, KC_PPLS, KC_ENT , + KC_LALT, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, TG_NUM, KC_P0, KC_P1, KC_P2, KC_P3, XXXXXXX, KC_LGUI, + _______, _______, XXXXXXX, KC_LSFT + ), + + // ................................................................... Num Layer + // + // http://www.keyboard-layout-editor.com/#/gists/bc7902f1eada4d7d34d3445aa1eccdab + + // ┌──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┐ + // │ │ │ │ │ │ │ / │ 7 │ 8 │ 9 │ - │ │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Ctrl │ Home │ Up │ End │ PgUp │ │ * │ 4 │ 5 │ 6 │ + │ Enter│ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Alt │ Left │ Down │ Right│ PgDn │ f() │ 0 │ 1 │ 2 │ 3 │ │ GUI │ + // └──────┴──────┴──────┴──────┼──────┼──────┼──────┼──────┼──────┴──────┴──────┴──────┘ + // │ -- │ -- │ -- │ Shift│ + // └──────┴──────┴──────┴──────┘ + + [_NUM] = LAYOUT( + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_PSLS, KC_P7, KC_P8, KC_P9, KC_PMNS, XXXXXXX, + KC_LCTL, KC_HOME, KC_UP, KC_END, KC_PGUP, XXXXXXX, KC_PAST, KC_P4, KC_P5, KC_P6, KC_PPLS, KC_ENT , + KC_LALT, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, QWERTY, KC_P0, KC_P1, KC_P2, KC_P3, XXXXXXX, KC_LGUI, + XXXXXXX, XXXXXXX, XXXXXXX, KC_LSFT + ), + + // ...................................................................... Plover + // + // http://www.keyboard-layout-editor.com/#/gists/27b8f8649393a8ba4071ba946a9306f4 + + // ┌──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┐ + // │ 1 │ 1 │ 1 │ 1 │ 1 │ 1 │ 1 │ 1 │ 1 │ 1 │ 1 │ 1 │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │Qwerty│ S │ T │ P │ H │ * │ * │ F │ P │ L │ T │ D │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │Qwerty│ S │ K │ W │ R │ * │ * │ R │ B │ G │ S │ Z │ + // └──────┴──────┴──────┴──────┼──────┼──────┼──────┼──────┼──────┴──────┴──────┴──────┘ + // │ A │ O │ E │ U │ + // └──────┴──────┴──────┴──────┘ + + [_PLOVER] = LAYOUT( + KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1 , + QWERTY1, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, + QWERTY2, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_C, KC_V, KC_N, KC_M + ), + + // ...................................................................... TxBolt + // + // http://www.keyboard-layout-editor.com/#/gists/27b8f8649393a8ba4071ba946a9306f4 + + // ┌──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┐ + // │ # │ # │ # │ # │ # │ # │ # │ # │ # │ # │ # │ # │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │Qwerty│ S │ T │ P │ H │ * │ * │ F │ P │ L │ T │ D │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │Qwerty│ S │ K │ W │ R │ * │ * │ R │ B │ G │ S │ Z │ + // └──────┴──────┴──────┴──────┼──────┼──────┼──────┼──────┼──────┴──────┴──────┴──────┘ + // │ A │ O │ E │ U │ + // └──────┴──────┴──────┴──────┘ + + [_TXBOLT] = LAYOUT( + STN_N1, STN_N2, STN_N3, STN_N4, STN_N5, STN_N6, STN_N7, STN_N8, STN_N9, STN_NA, STN_NB, STN_NC , + QWERTY1, STN_S1, STN_TL, STN_PL, STN_HL, STN_ST1, STN_ST3, STN_FR, STN_PR, STN_LR, STN_TR, STN_DR , + QWERTY2, STN_S2, STN_KL, STN_WL, STN_RL, STN_ST2, STN_ST4, STN_RR, STN_BR, STN_GR, STN_SR, STN_ZR , + STN_A, STN_O, STN_E, STN_U + ), +}; +// clang-format on + +// ..................................................................... Keymaps + +#define QWERTY_1 1 +#define QWERTY_2 2 +#define QWERTY_12 3 +static uint8_t qwerty_n = 0; + +void qwerty(void) { + qwerty_n = 0; + layer_move(0); + set_single_persistent_default_layer(_QWERTY); +} + +void plover(keyrecord_t *record) { + if (record->event.pressed) { + layer_move(0); + layer_on(_PLOVER); + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } + keymap_config.raw = eeconfig_read_keymap(); + keymap_config.nkro = 1; + eeconfig_update_keymap(keymap_config.raw); + } +} + +void txbolt(void) { + layer_move(0); + layer_on(_TXBOLT); +} + +// ........................................................... User Keycode Trap + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + qwerty(); + } + return false; + case QWERTY1: + if (record->event.pressed) { + qwerty_n = qwerty_n | QWERTY_1; + if (qwerty_n == QWERTY_12) { + qwerty(); + } + } else { + qwerty_n = qwerty_n & ~QWERTY_1; + } + return false; + case QWERTY2: + if (record->event.pressed) { + qwerty_n = qwerty_n | QWERTY_2; + if (qwerty_n == QWERTY_12) { + qwerty(); + } + } else { + qwerty_n = qwerty_n & ~QWERTY_2; + } + return false; + case BLUE: + if (record->event.pressed) { + layer_on(_BLUE); + update_tri_layer(_BLUE, _ORANGE, _GREEN); + } else { + layer_off(_BLUE); + update_tri_layer(_BLUE, _ORANGE, _GREEN); + } + return false; + case ORANGE: + if (record->event.pressed) { + layer_on(_ORANGE); + update_tri_layer(_BLUE, _ORANGE, _GREEN); + } else { + layer_off(_ORANGE); + update_tri_layer(_BLUE, _ORANGE, _GREEN); + } + return false; + case PLOVER: + plover(record); + return false; + case TXBOLT: + if (record->event.pressed) { + txbolt(); + } + return false; + } + return true; +} + +// Initialize the steno protocol +void eeconfig_init_user(void) { + steno_set_mode(STENO_MODE_BOLT); // or STENO_MODE_GEMINI +} diff --git a/keyboards/splitography/keymaps/dvorak/keymap.c b/keyboards/splitography/keymaps/dvorak/keymap.c new file mode 100644 index 0000000000..d8cd6ae8f3 --- /dev/null +++ b/keyboards/splitography/keymaps/dvorak/keymap.c @@ -0,0 +1,291 @@ +/* Copyright 2021 Alexis Jeandeau + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H +#include "keymap_steno.h" + +enum keyboard_layers { + _DVORAK = 0, + _TXBOLT, + _PLOVER, + _BLUE, + _ORANGE, + _GREEN, + _NUM, + _END_LAYERS, +}; + +enum keyboard_keycodes { + DVORAK = SAFE_RANGE, + DVORAK1, + DVORAK2, + TXBOLT, + PLOVER, + BLUE, + ORANGE, +}; + +#define COPY LCTL(KC_C) +#define CUT LCTL(KC_X) +#define PASTE LCTL(KC_V) +#define UNDO LCTL(KC_Z) +#define TG_NUM TG(_NUM) + +// clang-format off +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + // ...................................................................... Dvorak + // + // http://www.keyboard-layout-editor.com/#/gists/1b04ce6be0cee6e5d2998b2a8efb8b09 + + // ┌──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┐ + // │ Esc │ " │ , │ . │ P │ Y │ F │ G │ C │ R │ L │ Bksp │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Alt │ A │ O │ E │ U │ I │ D │ H │ T │ N │ S │ Enter│ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Shift│ ; │ Q │ J │ K │ X │ B │ M │ W │ V │ Z │ GUI │ + // └──────┴──────┴──────┴──────┼──────┼──────┼──────┼──────┼──────┴──────┴──────┴──────┘ + // │Orange│ Blue │ Space│ Ctrl │ + // └──────┴──────┴──────┴──────┘ + + [_DVORAK] = LAYOUT( + KC_ESC, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, + KC_LALT, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_ENT , + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_LGUI, + ORANGE, BLUE, KC_SPC, KC_LCTL + ), + + // .................................................................. Blue Layer + //XXXXXXX, + // http://www.keyboard-layout-editor.com/#/gists/054b8bc0e31971bb962ea1c781232e0b + + // ┌──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┐ + // │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Alt │ Stop │ Prev │ Play │ Next │ +Vol │ │ │ │ [ │ ] │ / │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Shift│ Undo │ Cut │ Copy │ Paste│ -Vol │ Mute │ │ │ - │ = │ GUI │ + // └──────┴──────┴──────┴──────┼──────┼──────┼──────┼──────┼──────┴──────┴──────┴──────┘ + // │Orange│ f() │ Del │ Ctrl │ + // └──────┴──────┴──────┴──────┘ + + [_BLUE] = LAYOUT( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, XXXXXXX, + KC_LALT, KC_MSTP, KC_MPRV, KC_MPLY, KC_MNXT, KC_VOLU, XXXXXXX, XXXXXXX, XXXXXXX, KC_LBRC, KC_RBRC, KC_SLSH, + KC_LSFT, UNDO, CUT, COPY, PASTE, KC_VOLD, KC_MUTE, XXXXXXX, XXXXXXX, KC_MINS, KC_EQL, KC_LGUI, + ORANGE, _______, KC_DEL, KC_LCTL + ), + + // ................................................................ Orange Layer + // + // http://www.keyboard-layout-editor.com/#/gists/83ccc7c3faa78b1f67f6fef65063a248 + + // ┌──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┐ + // │Plover│ F1 │ F2 │ F3 │ F4 │ │ App │ PrScr│ScrLck│ Pause│ │ │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Alt │ F5 │ F6 │ F7 │ F8 │ │ │Insert│ Home │ PgUp │ │ │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Shift│ F9 │ F10 │ F11 │ F12 │ │ │ Del │ End │ PgDn │ \ │ GUI │ + // └──────┴──────┴──────┴──────┼──────┼──────┼──────┼──────┼──────┴──────┴──────┴──────┘ + // │ f() │ Blue │ Tab │ Ctrl │ + // └──────┴──────┴──────┴──────┘ + + [_ORANGE] = LAYOUT( + PLOVER, KC_F1, KC_F2, KC_F3, KC_F4, XXXXXXX, KC_APP, KC_PSCR, KC_SLCK, KC_PAUS, XXXXXXX, XXXXXXX, + KC_LALT, KC_F5, KC_F6, KC_F7, KC_F8, XXXXXXX, XXXXXXX, KC_INS, KC_HOME, KC_PGUP, XXXXXXX, XXXXXXX, + KC_LSFT, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, XXXXXXX, KC_DEL, KC_END, KC_PGDN, KC_BSLS, KC_LGUI, + _______, BLUE, KC_TAB, KC_LCTL + ), + + // ................................................................. Green Layer + // + // http://www.keyboard-layout-editor.com/#/gists/bc7902f1eada4d7d34d3445aa1eccdab + + // ┌──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┐ + // │TxBolt│ │ │ │ │Scroll│ / │ 7 │ 8 │ 9 │ - │ │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Alt │ Home │ Up │ End │ PgUp │ Caps │ * │ 4 │ 5 │ 6 │ + │ Enter│ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Shift│ Left │ Down │ Right│ PgDn │ Num │ 0 │ 1 │ 2 │ 3 │ │ GUI │ + // └──────┴──────┴──────┴──────┼──────┼──────┼──────┼──────┼──────┴──────┴──────┴──────┘ + // │ f() │ f() │ -- │ Ctrl │ + // └──────┴──────┴──────┴──────┘ + + [_GREEN] = LAYOUT( + TXBOLT, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_SLCK, KC_PSLS, KC_P7, KC_P8, KC_P9, KC_MINS, XXXXXXX, + KC_LALT, KC_HOME, KC_UP, KC_END, KC_PGUP, KC_CAPS, KC_PAST, KC_P4, KC_P5, KC_P6, KC_PPLS, KC_ENT , + KC_LSFT, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, TG_NUM, KC_P0, KC_P1, KC_P2, KC_P3, XXXXXXX, KC_LGUI, + _______, _______, XXXXXXX, KC_LCTL + ), + + // ................................................................... Num Layer + // + // http://www.keyboard-layout-editor.com/#/gists/bc7902f1eada4d7d34d3445aa1eccdab + + // ┌──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┐ + // │ │ │ │ │ │ │ / │ 7 │ 8 │ 9 │ - │ │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Alt │ Home │ Up │ End │ PgUp │ │ * │ 4 │ 5 │ 6 │ + │ Enter│ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Shift│ Left │ Down │ Right│ PgDn │ f() │ 0 │ 1 │ 2 │ 3 │ │ GUI │ + // └──────┴──────┴──────┴──────┼──────┼──────┼──────┼──────┼──────┴──────┴──────┴──────┘ + // │ -- │ -- │ -- │ Ctrl │ + // └──────┴──────┴──────┴──────┘ + + [_NUM] = LAYOUT( + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_PSLS, KC_P7, KC_P8, KC_P9, KC_PMNS, XXXXXXX, + KC_LALT, KC_HOME, KC_UP, KC_END, KC_PGUP, XXXXXXX, KC_PAST, KC_P4, KC_P5, KC_P6, KC_PPLS, KC_ENT , + KC_LSFT, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, DVORAK, KC_P0, KC_P1, KC_P2, KC_P3, XXXXXXX, KC_LGUI, + XXXXXXX, XXXXXXX, XXXXXXX, KC_LCTL + ), + + // ...................................................................... Plover + // + // http://www.keyboard-layout-editor.com/#/gists/27b8f8649393a8ba4071ba946a9306f4 + + // ┌──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┐ + // │ 1 │ 1 │ 1 │ 1 │ 1 │ 1 │ 1 │ 1 │ 1 │ 1 │ 1 │ 1 │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │Dvorak│ S │ T │ P │ H │ * │ * │ F │ P │ L │ T │ D │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │Dvorak│ S │ K │ W │ R │ * │ * │ R │ B │ G │ S │ Z │ + // └──────┴──────┴──────┴──────┼──────┼──────┼──────┼──────┼──────┴──────┴──────┴──────┘ + // │ A │ O │ E │ U │ + // └──────┴──────┴──────┴──────┘ + + [_PLOVER] = LAYOUT( + KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1 , + DVORAK1, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, + DVORAK2, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_C, KC_V, KC_N, KC_M + ), + + // ...................................................................... TxBolt + // + // http://www.keyboard-layout-editor.com/#/gists/27b8f8649393a8ba4071ba946a9306f4 + + // ┌──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┐ + // │ # │ # │ # │ # │ # │ # │ # │ # │ # │ # │ # │ # │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │Dvorak│ S │ T │ P │ H │ * │ * │ F │ P │ L │ T │ D │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │Dvorak│ S │ K │ W │ R │ * │ * │ R │ B │ G │ S │ Z │ + // └──────┴──────┴──────┴──────┼──────┼──────┼──────┼──────┼──────┴──────┴──────┴──────┘ + // │ A │ O │ E │ U │ + // └──────┴──────┴──────┴──────┘ + + [_TXBOLT] = LAYOUT( + STN_N1, STN_N2, STN_N3, STN_N4, STN_N5, STN_N6, STN_N7, STN_N8, STN_N9, STN_NA, STN_NB, STN_NC , + DVORAK1, STN_S1, STN_TL, STN_PL, STN_HL, STN_ST1, STN_ST3, STN_FR, STN_PR, STN_LR, STN_TR, STN_DR , + DVORAK2, STN_S2, STN_KL, STN_WL, STN_RL, STN_ST2, STN_ST4, STN_RR, STN_BR, STN_GR, STN_SR, STN_ZR , + STN_A, STN_O, STN_E, STN_U + ), +}; +// clang-format on + +// ..................................................................... Keymaps + +#define DVORAK_1 1 +#define DVORAK_2 2 +#define DVORAK_12 3 +static uint8_t dvorak_n = 0; + +void dvorak(void) { + dvorak_n = 0; + layer_move(0); + set_single_persistent_default_layer(_DVORAK); +} + +void plover(keyrecord_t *record) { + if (record->event.pressed) { + layer_move(0); + layer_on(_PLOVER); + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } + keymap_config.raw = eeconfig_read_keymap(); + keymap_config.nkro = 1; + eeconfig_update_keymap(keymap_config.raw); + } +} + +void txbolt(void) { + layer_move(0); + layer_on(_TXBOLT); +} + +// ........................................................... User Keycode Trap + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case DVORAK: + if (record->event.pressed) { + dvorak(); + } + return false; + case DVORAK1: + if (record->event.pressed) { + dvorak_n = dvorak_n | DVORAK_1; + if (dvorak_n == DVORAK_12) { + dvorak(); + } + } else { + dvorak_n = dvorak_n & ~DVORAK_1; + } + return false; + case DVORAK2: + if (record->event.pressed) { + dvorak_n = dvorak_n | DVORAK_2; + if (dvorak_n == DVORAK_12) { + dvorak(); + } + } else { + dvorak_n = dvorak_n & ~DVORAK_2; + } + return false; + case BLUE: + if (record->event.pressed) { + layer_on(_BLUE); + update_tri_layer(_BLUE, _ORANGE, _GREEN); + } else { + layer_off(_BLUE); + update_tri_layer(_BLUE, _ORANGE, _GREEN); + } + return false; + case ORANGE: + if (record->event.pressed) { + layer_on(_ORANGE); + update_tri_layer(_BLUE, _ORANGE, _GREEN); + } else { + layer_off(_ORANGE); + update_tri_layer(_BLUE, _ORANGE, _GREEN); + } + return false; + case PLOVER: + plover(record); + return false; + case TXBOLT: + if (record->event.pressed) { + txbolt(); + } + return false; + } + return true; +} + +// Initialize the steno protocol +void eeconfig_init_user(void) { + steno_set_mode(STENO_MODE_BOLT); // or STENO_MODE_GEMINI +} diff --git a/keyboards/splitography/keymaps/jeandeaual/keymap.c b/keyboards/splitography/keymaps/jeandeaual/keymap.c new file mode 100644 index 0000000000..6679d835f2 --- /dev/null +++ b/keyboards/splitography/keymaps/jeandeaual/keymap.c @@ -0,0 +1,293 @@ +/* Copyright 2021 Alexis Jeandeau + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H +#include "keymap_steno.h" + +enum keyboard_layers { + _GEMINI = 0, + _QWERTY, + _DVORAK, + _BLUE, + _ORANGE, + _GREEN, + _NUM, + _END_LAYERS, +}; + +enum keyboard_keycodes { + QWERTY = SAFE_RANGE, + DVORAK, + BASE, + BASE1, + BASE2, + GEMINI, + BLUE, + ORANGE, +}; + +#define COPY LCTL(KC_C) +#define CUT LCTL(KC_X) +#define PASTE LCTL(KC_V) +#define UNDO LCTL(KC_Z) +#define TG_NUM TG(_NUM) + +// clang-format off +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + // ...................................................................... GeminiPR + // + // ┌──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┐ + // │ # │ # │ # │ # │ # │ # │ # │ # │ # │ # │ # │ # │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Base │ S │ T │ P │ H │ * │ * │ F │ P │ L │ T │ D │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Base │ S │ K │ W │ R │ * │ * │ R │ B │ G │ S │ Z │ + // └──────┴──────┴──────┴──────┼──────┼──────┼──────┼──────┼──────┴──────┴──────┴──────┘ + // │ A │ O │ E │ U │ + // └──────┴──────┴──────┴──────┘ + + [_GEMINI] = LAYOUT( + STN_N1, STN_N2, STN_N3, STN_N4, STN_N5, STN_N6, STN_N7, STN_N8, STN_N9, STN_NA, STN_NB, STN_NC , + BASE1, STN_S1, STN_TL, STN_PL, STN_HL, STN_ST1, STN_ST3, STN_FR, STN_PR, STN_LR, STN_TR, STN_DR , + BASE2, STN_S2, STN_KL, STN_WL, STN_RL, STN_ST2, STN_ST4, STN_RR, STN_BR, STN_GR, STN_SR, STN_ZR , + STN_A, STN_O, STN_E, STN_U + ), + + // ...................................................................... Qwerty + // + // ┌──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┐ + // │ Esc │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ Bksp │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Ctrl │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ Enter│ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Shift│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ GUI │ + // └──────┴──────┴──────┴──────┼──────┼──────┼──────┼──────┼──────┴──────┴──────┴──────┘ + // │Orange│ Blue │ Space│ Alt │ + // └──────┴──────┴──────┴──────┘ + + [_QWERTY] = LAYOUT( + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT , + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LGUI, + ORANGE, BLUE, KC_SPC, KC_LALT + ), + + // ...................................................................... Dvorak + // + // ┌──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┐ + // │ Esc │ " │ , │ . │ P │ Y │ F │ G │ C │ R │ L │ Bksp │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Ctrl │ A │ O │ E │ U │ I │ D │ H │ T │ N │ S │ Enter│ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Shift│ ; │ Q │ J │ K │ X │ B │ M │ W │ V │ Z │ GUI │ + // └──────┴──────┴──────┴──────┼──────┼──────┼──────┼──────┼──────┴──────┴──────┴──────┘ + // │Orange│ Blue │ Space│ Alt │ + // └──────┴──────┴──────┴──────┘ + + [_DVORAK] = LAYOUT( + KC_ESC, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, + KC_LCTL, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_ENT , + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_LGUI, + ORANGE, BLUE, KC_SPC, KC_LALT + ), + + // .................................................................. Blue Layer + // + // ┌──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┐ + // │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Ctrl │ Stop │ Prev │ Play │ Next │ +Vol │ │ │ │ [ │ ] │ ' │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Shift│ Undo │ Cut │ Copy │ Paste│ -Vol │ Mute │ │ │ - │ = │ GUI │ + // └──────┴──────┴──────┴──────┼──────┼──────┼──────┼──────┼──────┴──────┴──────┴──────┘ + // │Orange│ f() │ Del │ Alt │ + // └──────┴──────┴──────┴──────┘ + + [_BLUE] = LAYOUT( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, XXXXXXX, + KC_LCTL, KC_MSTP, KC_MPRV, KC_MPLY, KC_MNXT, KC_VOLU, XXXXXXX, XXXXXXX, XXXXXXX, KC_LBRC, KC_RBRC, KC_QUOT, + KC_LSFT, UNDO, CUT, COPY, PASTE, KC_VOLD, KC_MUTE, XXXXXXX, XXXXXXX, KC_MINS, KC_EQL, KC_LGUI, + ORANGE, _______, KC_DEL, KC_LALT + ), + + // ................................................................ Orange Layer + // + // ┌──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┐ + // │ │ F1 │ F2 │ F3 │ F4 │ │ App │ PrScr│ScrLck│ Pause│ │ │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Ctrl │ F5 │ F6 │ F7 │ F8 │ │ │Insert│ Home │ PgUp │ │ │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Shift│ F9 │ F10 │ F11 │ F12 │ │ │ Del │ End │ PgDn │ \ │ GUI │ + // └──────┴──────┴──────┴──────┼──────┼──────┼──────┼──────┼──────┴──────┴──────┴──────┘ + // │ f() │ Blue │ Tab │ Alt │ + // └──────┴──────┴──────┴──────┘ + + [_ORANGE] = LAYOUT( + XXXXXXX, KC_F1, KC_F2, KC_F3, KC_F4, XXXXXXX, KC_APP, KC_PSCR, KC_SLCK, KC_PAUS, XXXXXXX, XXXXXXX, + KC_LCTL, KC_F5, KC_F6, KC_F7, KC_F8, XXXXXXX, XXXXXXX, KC_INS, KC_HOME, KC_PGUP, XXXXXXX, XXXXXXX, + KC_LSFT, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, XXXXXXX, KC_DEL, KC_END, KC_PGDN, KC_BSLS, KC_LGUI, + _______, BLUE, KC_TAB, KC_LALT + ), + + // ................................................................. Green Layer + // + // ┌──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┐ + // │Gemini│QWERTY│Dvorak│ │ │Scroll│ / │ 7 │ 8 │ 9 │ - │ │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Ctrl │ Home │ Up │ End │ PgUp │ Caps │ * │ 4 │ 5 │ 6 │ + │ Enter│ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Shift│ Left │ Down │ Right│ PgDn │ Num │ 0 │ 1 │ 2 │ 3 │ │ GUI │ + // └──────┴──────┴──────┴──────┼──────┼──────┼──────┼──────┼──────┴──────┴──────┴──────┘ + // │ f() │ f() │ -- │ Alt │ + // └──────┴──────┴──────┴──────┘ + + [_GREEN] = LAYOUT( + GEMINI, QWERTY, DVORAK, XXXXXXX, XXXXXXX, KC_SLCK, KC_PSLS, KC_P7, KC_P8, KC_P9, KC_MINS, XXXXXXX, + KC_LCTL, KC_HOME, KC_UP, KC_END, KC_PGUP, KC_CAPS, KC_PAST, KC_P4, KC_P5, KC_P6, KC_PPLS, KC_ENT , + KC_LSFT, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, TG_NUM, KC_P0, KC_P1, KC_P2, KC_P3, XXXXXXX, KC_LGUI, + _______, _______, XXXXXXX, KC_LALT + ), + + // ................................................................... Num Layer + // + // ┌──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┐ + // │ │ │ │ │ │ │ / │ 7 │ 8 │ 9 │ - │ │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Ctrl │ Home │ Up │ End │ PgUp │ │ * │ 4 │ 5 │ 6 │ + │ Enter│ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Shift│ Left │ Down │ Right│ PgDn │ f() │ 0 │ 1 │ 2 │ 3 │ │ GUI │ + // └──────┴──────┴──────┴──────┼──────┼──────┼──────┼──────┼──────┴──────┴──────┴──────┘ + // │ -- │ -- │ -- │ Alt │ + // └──────┴──────┴──────┴──────┘ + + [_NUM] = LAYOUT( + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_PSLS, KC_P7, KC_P8, KC_P9, KC_PMNS, XXXXXXX, + KC_LCTL, KC_HOME, KC_UP, KC_END, KC_PGUP, XXXXXXX, KC_PAST, KC_P4, KC_P5, KC_P6, KC_PPLS, KC_ENT , + KC_LSFT, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, BASE, KC_P0, KC_P1, KC_P2, KC_P3, XXXXXXX, KC_LGUI, + XXXXXXX, XXXXXXX, XXXXXXX, KC_LALT + ), +}; +// clang-format on + +// ..................................................................... Keymaps + +#define BASE_1 1 +#define BASE_2 2 +#define BASE_12 3 +static uint8_t base_n = 0; + +void (*base_layer)(void) = NULL; + +void qwerty(void) { + base_layer = qwerty; + base_n = 0; + layer_move(0); + set_single_persistent_default_layer(_QWERTY); +} + +void dvorak(void) { + base_layer = dvorak; + base_n = 0; + layer_move(0); + set_single_persistent_default_layer(_DVORAK); +} + +void gemini(void) { + layer_move(0); + set_single_persistent_default_layer(_GEMINI); +} + +// ........................................................... User Keycode Trap + +bool process_record_keymap(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + qwerty(); + } + return false; + case DVORAK: + if (record->event.pressed) { + dvorak(); + } + return false; + case KC_QUOT: + if ((base_layer != dvorak) || (biton32(layer_state) != _BLUE)) { + break; + } + if (record->event.pressed) { + register_code(KC_SLSH); + } else { + unregister_code(KC_SLSH); + } + return false; + case BASE: + if (record->event.pressed) { + base_layer(); + } + return false; + case BASE1: + if (record->event.pressed) { + base_n = base_n | BASE_1; + if (base_n == BASE_12) { + base_layer(); + } + } else { + base_n = base_n & ~BASE_1; + } + return false; + case BASE2: + if (record->event.pressed) { + base_n = base_n | BASE_2; + if (base_n == BASE_12) { + base_layer(); + } + } else { + base_n = base_n & ~BASE_2; + } + return false; + case BLUE: + if (record->event.pressed) { + layer_on(_BLUE); + update_tri_layer(_BLUE, _ORANGE, _GREEN); + } else { + layer_off(_BLUE); + update_tri_layer(_BLUE, _ORANGE, _GREEN); + } + return false; + case ORANGE: + if (record->event.pressed) { + layer_on(_ORANGE); + update_tri_layer(_BLUE, _ORANGE, _GREEN); + } else { + layer_off(_ORANGE); + update_tri_layer(_BLUE, _ORANGE, _GREEN); + } + return false; + case GEMINI: + if (record->event.pressed) { + gemini(); + } + return false; + } + return true; +} + +// Initialize the steno protocol +void eeconfig_init_user(void) { + steno_set_mode(STENO_MODE_GEMINI); // or STENO_MODE_BOLT + base_layer = dvorak; +} diff --git a/keyboards/splitography/keymaps/jeandeaual/readme.md b/keyboards/splitography/keymaps/jeandeaual/readme.md new file mode 100644 index 0000000000..8e786b7fc5 --- /dev/null +++ b/keyboards/splitography/keymaps/jeandeaual/readme.md @@ -0,0 +1,7 @@ +# Differences with the [default layout](../default) + +* Alt and Ctrl are shifted. +* Use Gemini PR instead of TX Bolt. +* The Plover layer has been removed. +* QWERTY and Dvorak like in the [multi layout](../multi). +* The default layer is set to the steno (Gemini PR) layout. diff --git a/keyboards/splitography/keymaps/multi/keymap.c b/keyboards/splitography/keymaps/multi/keymap.c new file mode 100644 index 0000000000..af1cc1a801 --- /dev/null +++ b/keyboards/splitography/keymaps/multi/keymap.c @@ -0,0 +1,411 @@ +/* Copyright 2021 Alexis Jeandeau + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H +#include "keymap_steno.h" + +enum keyboard_layers { + _QWERTY = 0, + _DVORAK, + _COLEMAK, + _WORKMAN, + _TXBOLT, + _PLOVER, + _BLUE, + _ORANGE, + _GREEN, + _NUM, + _END_LAYERS, +}; + +enum keyboard_keycodes { + QWERTY = SAFE_RANGE, + DVORAK, + COLEMAK, + WORKMAN, + BASE, + BASE1, + BASE2, + TXBOLT, + PLOVER, + BLUE, + ORANGE, +}; + +#define COPY LCTL(KC_C) +#define CUT LCTL(KC_X) +#define PASTE LCTL(KC_V) +#define UNDO LCTL(KC_Z) +#define TG_NUM TG(_NUM) + +// clang-format off +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + // ...................................................................... Qwerty + // + // http://www.keyboard-layout-editor.com/#/gists/1b04ce6be0cee6e5d2998b2a8efb8b09 + + // ┌──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┐ + // │ Esc │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ Bksp │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Alt │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ Enter│ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Shift│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │ GUI │ + // └──────┴──────┴──────┴──────┼──────┼──────┼──────┼──────┼──────┴──────┴──────┴──────┘ + // │Orange│ Blue │ Space│ Ctrl │ + // └──────┴──────┴──────┴──────┘ + + [_QWERTY] = LAYOUT( + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + KC_LALT, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT , + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LGUI, + ORANGE, BLUE, KC_SPC, KC_LCTL + ), + + // ...................................................................... Dvorak + // + // http://www.keyboard-layout-editor.com/#/gists/1b04ce6be0cee6e5d2998b2a8efb8b09 + + // ┌──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┐ + // │ Esc │ " │ , │ . │ P │ Y │ F │ G │ C │ R │ L │ Bksp │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Alt │ A │ O │ E │ U │ I │ D │ H │ T │ N │ S │ Enter│ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Shift│ ; │ Q │ J │ K │ X │ B │ M │ W │ V │ Z │ GUI │ + // └──────┴──────┴──────┴──────┼──────┼──────┼──────┼──────┼──────┴──────┴──────┴──────┘ + // │Orange│ Blue │ Space│ Ctrl │ + // └──────┴──────┴──────┴──────┘ + + [_DVORAK] = LAYOUT( + KC_ESC, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, + KC_LALT, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_ENT , + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_LGUI, + ORANGE, BLUE, KC_SPC, KC_LCTL + ), + + // ..................................................................... Colemak + + // ┌──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┐ + // │ Esc │ Q │ W │ F │ P │ G │ J │ L │ U │ Y │ ; │ Bksp │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Alt │ A │ R │ S │ T │ D │ H │ N │ E │ I │ O │ Enter│ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Shift│ Z │ X │ C │ V │ B │ K │ M │ , │ . │ / │ GUI │ + // └──────┴──────┴──────┴──────┼──────┼──────┼──────┼──────┼──────┴──────┴──────┴──────┘ + // │Orange│ Blue │ Space│ Ctrl │ + // └──────┴──────┴──────┴──────┘ + + [_COLEMAK] = LAYOUT( + KC_ESC, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, + KC_LALT, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_ENT , + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LGUI, + ORANGE, BLUE, KC_SPC, KC_LCTL + ), + + // ..................................................................... Workman + + // ┌──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┐ + // │ Esc │ Q │ D │ R │ W │ B │ J │ F │ U │ P │ ; │ Bksp │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Alt │ A │ S │ H │ T │ G │ Y │ N │ E │ O │ I │ Enter│ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Shift│ Z │ X │ M │ C │ V │ K │ L │ , │ . │ / │ GUI │ + // └──────┴──────┴──────┴──────┼──────┼──────┼──────┼──────┼──────┴──────┴──────┴──────┘ + // │Orange│ Blue │ Space│ Ctrl │ + // └──────┴──────┴──────┴──────┘ + + [_WORKMAN] = LAYOUT( + KC_ESC, KC_Q, KC_D, KC_R, KC_W, KC_B, KC_J, KC_F, KC_U, KC_P, KC_SCLN, KC_BSPC, + KC_LALT, KC_A, KC_S, KC_H, KC_T, KC_G, KC_Y, KC_N, KC_E, KC_O, KC_I, KC_ENT , + KC_LSFT, KC_Z, KC_X, KC_M, KC_C, KC_V, KC_K, KC_L, KC_COMM, KC_DOT, KC_SLSH, KC_LGUI, + ORANGE, BLUE, KC_SPC, KC_LCTL + ), + + // .................................................................. Blue Layer + // + // http://www.keyboard-layout-editor.com/#/gists/054b8bc0e31971bb962ea1c781232e0b + + // ┌──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┐ + // │ ` │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Alt │ Stop │ Prev │ Play │ Next │ +Vol │ │ │ │ [ │ ] │ ' │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Shift│ Undo │ Cut │ Copy │ Paste│ -Vol │ Mute │ │ │ - │ = │ GUI │ + // └──────┴──────┴──────┴──────┼──────┼──────┼──────┼──────┼──────┴──────┴──────┴──────┘ + // │Orange│ f() │ Del │ Ctrl │ + // └──────┴──────┴──────┴──────┘ + + [_BLUE] = LAYOUT( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, XXXXXXX, + KC_LALT, KC_MSTP, KC_MPRV, KC_MPLY, KC_MNXT, KC_VOLU, XXXXXXX, XXXXXXX, XXXXXXX, KC_LBRC, KC_RBRC, KC_QUOT, + KC_LSFT, UNDO, CUT, COPY, PASTE, KC_VOLD, KC_MUTE, XXXXXXX, XXXXXXX, KC_MINS, KC_EQL, KC_LGUI, + ORANGE, _______, KC_DEL, KC_LCTL + ), + + // ................................................................ Orange Layer + // + // http://www.keyboard-layout-editor.com/#/gists/83ccc7c3faa78b1f67f6fef65063a248 + + // ┌──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┐ + // │Plover│ F1 │ F2 │ F3 │ F4 │ │ App │ PrScr│ScrLck│ Pause│ │ │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Alt │ F5 │ F6 │ F7 │ F8 │ │ │Insert│ Home │ PgUp │ │ │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Shift│ F9 │ F10 │ F11 │ F12 │ │ │ Del │ End │ PgDn │ \ │ GUI │ + // └──────┴──────┴──────┴──────┼──────┼──────┼──────┼──────┼──────┴──────┴──────┴──────┘ + // │ f() │ Blue │ Tab │ Ctrl │ + // └──────┴──────┴──────┴──────┘ + + [_ORANGE] = LAYOUT( + PLOVER, KC_F1, KC_F2, KC_F3, KC_F4, XXXXXXX, KC_APP, KC_PSCR, KC_SLCK, KC_PAUS, XXXXXXX, XXXXXXX, + KC_LALT, KC_F5, KC_F6, KC_F7, KC_F8, XXXXXXX, XXXXXXX, KC_INS, KC_HOME, KC_PGUP, XXXXXXX, XXXXXXX, + KC_LSFT, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, XXXXXXX, KC_DEL, KC_END, KC_PGDN, KC_BSLS, KC_LGUI, + _______, BLUE, KC_TAB, KC_LCTL + ), + + // ................................................................. Green Layer + // + // http://www.keyboard-layout-editor.com/#/gists/bc7902f1eada4d7d34d3445aa1eccdab + + // ┌──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┐ + // │TxBolt│QWERTY│Dvorak│Colemk│Workmn│Scroll│ / │ 7 │ 8 │ 9 │ - │ │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Alt │ Home │ Up │ End │ PgUp │ Caps │ * │ 4 │ 5 │ 6 │ + │ Enter│ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Shift│ Left │ Down │ Right│ PgDn │ Num │ 0 │ 1 │ 2 │ 3 │ │ GUI │ + // └──────┴──────┴──────┴──────┼──────┼──────┼──────┼──────┼──────┴──────┴──────┴──────┘ + // │ f() │ f() │ -- │ Ctrl │ + // └──────┴──────┴──────┴──────┘ + + [_GREEN] = LAYOUT( + TXBOLT, QWERTY, DVORAK, COLEMAK, WORKMAN, KC_SLCK, KC_PSLS, KC_P7, KC_P8, KC_P9, KC_MINS, XXXXXXX, + KC_LALT, KC_HOME, KC_UP, KC_END, KC_PGUP, KC_CAPS, KC_PAST, KC_P4, KC_P5, KC_P6, KC_PPLS, KC_ENT , + KC_LSFT, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, TG_NUM, KC_P0, KC_P1, KC_P2, KC_P3, XXXXXXX, KC_LGUI, + _______, _______, XXXXXXX, KC_LCTL + ), + + // ................................................................... Num Layer + // + // http://www.keyboard-layout-editor.com/#/gists/bc7902f1eada4d7d34d3445aa1eccdab + + // ┌──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┐ + // │ │ │ │ │ │ │ / │ 7 │ 8 │ 9 │ - │ │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Alt │ Home │ Up │ End │ PgUp │ │ * │ 4 │ 5 │ 6 │ + │ Enter│ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Shift│ Left │ Down │ Right│ PgDn │ f() │ 0 │ 1 │ 2 │ 3 │ │ GUI │ + // └──────┴──────┴──────┴──────┼──────┼──────┼──────┼──────┼──────┴──────┴──────┴──────┘ + // │ -- │ -- │ -- │ Ctrl │ + // └──────┴──────┴──────┴──────┘ + + [_NUM] = LAYOUT( + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_PSLS, KC_P7, KC_P8, KC_P9, KC_PMNS, XXXXXXX, + KC_LALT, KC_HOME, KC_UP, KC_END, KC_PGUP, XXXXXXX, KC_PAST, KC_P4, KC_P5, KC_P6, KC_PPLS, KC_ENT , + KC_LSFT, KC_LEFT, KC_DOWN, KC_RGHT, KC_PGDN, BASE, KC_P0, KC_P1, KC_P2, KC_P3, XXXXXXX, KC_LGUI, + XXXXXXX, XXXXXXX, XXXXXXX, KC_LCTL + ), + + // ...................................................................... Plover + // + // http://www.keyboard-layout-editor.com/#/gists/27b8f8649393a8ba4071ba946a9306f4 + + // ┌──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┐ + // │ 1 │ 1 │ 1 │ 1 │ 1 │ 1 │ 1 │ 1 │ 1 │ 1 │ 1 │ 1 │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Base │ S │ T │ P │ H │ * │ * │ F │ P │ L │ T │ D │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Base │ S │ K │ W │ R │ * │ * │ R │ B │ G │ S │ Z │ + // └──────┴──────┴──────┴──────┼──────┼──────┼──────┼──────┼──────┴──────┴──────┴──────┘ + // │ A │ O │ E │ U │ + // └──────┴──────┴──────┴──────┘ + + [_PLOVER] = LAYOUT( + KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1 , + BASE1, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, + BASE2, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_C, KC_V, KC_N, KC_M + ), + + // ...................................................................... TxBolt + // + // http://www.keyboard-layout-editor.com/#/gists/27b8f8649393a8ba4071ba946a9306f4 + + // ┌──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┐ + // │ # │ # │ # │ # │ # │ # │ # │ # │ # │ # │ # │ # │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Base │ S │ T │ P │ H │ * │ * │ F │ P │ L │ T │ D │ + // ├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ + // │ Base │ S │ K │ W │ R │ * │ * │ R │ B │ G │ S │ Z │ + // └──────┴──────┴──────┴──────┼──────┼──────┼──────┼──────┼──────┴──────┴──────┴──────┘ + // │ A │ O │ E │ U │ + // └──────┴──────┴──────┴──────┘ + + [_TXBOLT] = LAYOUT( + STN_N1, STN_N2, STN_N3, STN_N4, STN_N5, STN_N6, STN_N7, STN_N8, STN_N9, STN_NA, STN_NB, STN_NC , + BASE1, STN_S1, STN_TL, STN_PL, STN_HL, STN_ST1, STN_ST3, STN_FR, STN_PR, STN_LR, STN_TR, STN_DR , + BASE2, STN_S2, STN_KL, STN_WL, STN_RL, STN_ST2, STN_ST4, STN_RR, STN_BR, STN_GR, STN_SR, STN_ZR , + STN_A, STN_O, STN_E, STN_U + ), +}; +// clang-format on + +// ..................................................................... Keymaps + +#define BASE_1 1 +#define BASE_2 2 +#define BASE_12 3 +static uint8_t base_n = 0; + +void (*base_layer)(void) = NULL; + +void qwerty(void) { + base_layer = qwerty; + base_n = 0; + layer_move(0); + set_single_persistent_default_layer(_QWERTY); +} + +void dvorak(void) { + base_layer = dvorak; + base_n = 0; + layer_move(0); + set_single_persistent_default_layer(_DVORAK); +} + +void colemak(void) { + base_layer = colemak; + base_n = 0; + layer_move(0); + set_single_persistent_default_layer(_COLEMAK); +} + +void workman(void) { + base_layer = workman; + base_n = 0; + layer_move(0); + set_single_persistent_default_layer(_WORKMAN); +} + +void plover(keyrecord_t *record) { + if (record->event.pressed) { + layer_move(0); + layer_on(_PLOVER); + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } + keymap_config.raw = eeconfig_read_keymap(); + keymap_config.nkro = 1; + eeconfig_update_keymap(keymap_config.raw); + } +} + +void txbolt(void) { + layer_move(0); + layer_on(_TXBOLT); +} + +// ........................................................... User Keycode Trap + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + qwerty(); + } + return false; + case DVORAK: + if (record->event.pressed) { + dvorak(); + } + return false; + case KC_QUOT: + if ((base_layer != dvorak) || (biton32(layer_state) != _BLUE)) { + break; + } + if (record->event.pressed) { + register_code(KC_SLSH); + } else { + unregister_code(KC_SLSH); + } + return false; + case COLEMAK: + if (record->event.pressed) { + colemak(); + } + return false; + case WORKMAN: + if (record->event.pressed) { + workman(); + } + return false; + case BASE: + if (record->event.pressed) { + base_layer(); + } + return false; + case BASE1: + if (record->event.pressed) { + base_n = base_n | BASE_1; + if (base_n == BASE_12) { + base_layer(); + } + } else { + base_n = base_n & ~BASE_1; + } + return false; + case BASE2: + if (record->event.pressed) { + base_n = base_n | BASE_2; + if (base_n == BASE_12) { + base_layer(); + } + } else { + base_n = base_n & ~BASE_2; + } + return false; + case BLUE: + if (record->event.pressed) { + layer_on(_BLUE); + update_tri_layer(_BLUE, _ORANGE, _GREEN); + } else { + layer_off(_BLUE); + update_tri_layer(_BLUE, _ORANGE, _GREEN); + } + return false; + case ORANGE: + if (record->event.pressed) { + layer_on(_ORANGE); + update_tri_layer(_BLUE, _ORANGE, _GREEN); + } else { + layer_off(_ORANGE); + update_tri_layer(_BLUE, _ORANGE, _GREEN); + } + return false; + case PLOVER: + plover(record); + return false; + case TXBOLT: + if (record->event.pressed) { + txbolt(); + } + return false; + } + return true; +} + +// Initialize the steno protocol +void eeconfig_init_user(void) { + steno_set_mode(STENO_MODE_BOLT); // or STENO_MODE_BOLT +} diff --git a/keyboards/splitography/keymaps/multi/readme.md b/keyboards/splitography/keymaps/multi/readme.md new file mode 100644 index 0000000000..2eb7d8f98c --- /dev/null +++ b/keyboards/splitography/keymaps/multi/readme.md @@ -0,0 +1,15 @@ +# Differences with the [default layout](../default) + +* QWERTY, Dvorak, Colemak and Workman are available by pressing Orange + Blue + one of the top left keys: + +``` +┌──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┬──────┐ +│TxBolt│QWERTY│Dvorak│Colemk│Workmn│Scroll│ / │ 7 │ 8 │ 9 │ - │ │ +├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ +│ Alt │ Home │ Up │ End │ PgUp │ Caps │ * │ 4 │ 5 │ 6 │ + │ Enter│ +├──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┼──────┤ +│ Shift│ Left │ Down │ Right│ PgDn │ Num │ 0 │ 1 │ 2 │ 3 │ │ GUI │ +└──────┴──────┴──────┴──────┼──────┼──────┼──────┼──────┼──────┴──────┴──────┴──────┘ + │ f() │ f() │ -- │ Ctrl │ + └──────┴──────┴──────┴──────┘ +``` diff --git a/keyboards/splitography/readme.md b/keyboards/splitography/readme.md new file mode 100644 index 0000000000..eeb9b2f40d --- /dev/null +++ b/keyboards/splitography/readme.md @@ -0,0 +1,42 @@ +# Splitography + +![Splitography](https://i.imgur.com/NlmR4Gc.jpeg) + +A *pay what you will* compact keyboard intended for use with [Plover](https://www.openstenoproject.org/), free and open source stenography software. This is a low-cost keyboard with minimal packaging and design, and arrives fully assembled, ready to use. + +* Keyboard Maintainer: [The QMK Community](https://github.com/qmk) +* Hardware Supported: Splitography +* Hardware Availability: [softhruf.love](https://softhruf.love/collections/writers) + +Make example for this keyboard (after setting up your build environment): + + make splitography:default + +Flashing example for this keyboard: + + make splitography:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard. +* **Physical reset button**: Briefly press the button on the back of the PCB. +* **Keycode in layout**: Press the key mapped to `RESET` if it is available. + +## [Guide](https://softhruf.love/pages/guides) + +[Splitography quick start video](https://www.youtube.com/watch?v=ru4cRQ2s_v0) + +A short video guide on how to set up the SOFT/HRUF Splitography, a mechanical keyboard intended for use with [Plover](https://www.openstenoproject.org/plover/). + +Here is a reference card for the standard keyboard layout: + +![Reference card](https://i.imgur.com/ywe8jXR.png) + +* While holding down a colored thumb key, the matching colored functions/characters on the remaining keys can be pressed. +* Bottom edge keys are accessed by holding down both keys. +* Numlock locks in the Numpad layer. +* Alt and Shift pressed simultaneously to return to the standard layout. diff --git a/keyboards/splitography/rules.mk b/keyboards/splitography/rules.mk new file mode 100644 index 0000000000..e8326bcf09 --- /dev/null +++ b/keyboards/splitography/rules.mk @@ -0,0 +1,5 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu diff --git a/keyboards/splitography/splitography.c b/keyboards/splitography/splitography.c new file mode 100644 index 0000000000..4fe3452ef2 --- /dev/null +++ b/keyboards/splitography/splitography.c @@ -0,0 +1,17 @@ +/* Copyright 2021 Alexis Jeandeau + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "splitography.h" diff --git a/keyboards/splitography/splitography.h b/keyboards/splitography/splitography.h new file mode 100644 index 0000000000..cfef33363d --- /dev/null +++ b/keyboards/splitography/splitography.h @@ -0,0 +1,33 @@ +/* Copyright 2021 Alexis Jeandeau + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +// clang-format off +#define LAYOUT( \ + L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \ + L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \ + L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \ + L34, L35, R30, R31 \ +) \ +{ \ + { L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05 }, \ + { L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15 }, \ + { L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25 }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, L34, L35, R30, R31, KC_NO, KC_NO, KC_NO, KC_NO } \ +} From b06740c933c63a8f82e0a7112f9eeab9bd93687a Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Wed, 17 Nov 2021 20:05:12 +0000 Subject: [PATCH 507/595] Auto-create PRs for merged formatting issues (#15157) * Auto-create PRs for merged formatting issues * Update .github/workflows/format_push.yaml --- .github/workflows/format_push.yaml | 49 ++++++++++++++++++++++++++++++ 1 file changed, 49 insertions(+) create mode 100644 .github/workflows/format_push.yaml diff --git a/.github/workflows/format_push.yaml b/.github/workflows/format_push.yaml new file mode 100644 index 0000000000..8b579bf86f --- /dev/null +++ b/.github/workflows/format_push.yaml @@ -0,0 +1,49 @@ +name: Lint Format + +on: + push: + branches: + - master + - develop + +jobs: + lint: + runs-on: ubuntu-latest + + container: qmkfm/qmk_cli + + steps: + - name: Install dependencies + run: | + apt-get update && apt-get install -y dos2unix + + - uses: actions/checkout@v2 + with: + fetch-depth: 0 + + - name: Run qmk formatters + shell: 'bash {0}' + run: | + qmk format-c -a + qmk format-python + qmk format-text -a + git diff + + - uses: rlespinasse/github-slug-action@v3.x + + - name: Become QMK Bot + run: | + git config user.name 'QMK Bot' + git config user.email 'hello@qmk.fm' + + - name: Create Pull Request + uses: peter-evans/create-pull-request@v3 + if: ${{ github.repository == 'qmk/qmk_firmware'}} + with: + token: ${{ secrets.QMK_BOT_TOKEN }} + delete-branch: true + branch: bugfix/format_${{ env.GITHUB_REF_SLUG }} + author: QMK Bot + committer: QMK Bot + commit-message: Format code according to conventions + title: '[CI] Format code according to conventions' From 2c5d66987da4c7d5857cab8b09c4f852b4d8e4d9 Mon Sep 17 00:00:00 2001 From: QMK Bot Date: Wed, 17 Nov 2021 12:28:38 -0800 Subject: [PATCH 508/595] Format code according to conventions (#15193) --- drivers/qwiic/micro_oled.c | 2 +- drivers/sensors/adns5050.c | 23 +-- drivers/sensors/adns5050.h | 18 +- drivers/sensors/adns9800.c | 119 ++++++----- drivers/sensors/adns9800.h | 4 +- drivers/sensors/pmw3360.c | 96 ++++----- drivers/sensors/pmw3360.h | 19 +- .../phoenix45_ortho/keymaps/via/rules.mk | 2 +- keyboards/sneakbox/ava/info.json | 2 +- platforms/chibios/drivers/analog.c | 2 +- quantum/action.c | 83 ++++---- quantum/action.h | 2 +- quantum/action_tapping.c | 38 ++-- quantum/debounce/asym_eager_defer_pk.c | 22 +-- quantum/debounce/sym_defer_g.c | 2 +- quantum/debounce/sym_defer_pk.c | 6 +- quantum/debounce/sym_eager_pk.c | 8 +- quantum/debounce/sym_eager_pr.c | 8 +- .../tests/asym_eager_defer_pk_tests.cpp | 66 ++++--- .../debounce/tests/debounce_test_common.cpp | 72 +++---- quantum/debounce/tests/debounce_test_common.h | 24 ++- quantum/debounce/tests/sym_defer_g_tests.cpp | 45 +++-- quantum/debounce/tests/sym_defer_pk_tests.cpp | 45 +++-- quantum/debounce/tests/sym_eager_pk_tests.cpp | 48 +++-- quantum/debounce/tests/sym_eager_pr_tests.cpp | 57 ++++-- quantum/keymap_extras/keymap_steno.h | 3 +- quantum/process_keycode/process_combo.c | 184 +++++++++--------- quantum/process_keycode/process_combo.h | 4 +- quantum/process_keycode/process_steno.c | 9 +- quantum/quantum.c | 11 +- quantum/quantum_keycodes.h | 12 +- quantum/split_common/transactions.c | 48 ++--- tmk_core/common/chibios/sleep_led.c | 4 +- tmk_core/common/report.c | 4 +- tmk_core/protocol/ps2_mouse.c | 4 +- 35 files changed, 578 insertions(+), 518 deletions(-) diff --git a/drivers/qwiic/micro_oled.c b/drivers/qwiic/micro_oled.c index 8dfff6968f..d011ad225c 100644 --- a/drivers/qwiic/micro_oled.c +++ b/drivers/qwiic/micro_oled.c @@ -149,7 +149,7 @@ void micro_oled_init(void) { #endif send_command(MEMORYMODE); - send_command(0x02); // 0x02 = 10b, Page addressing mode + send_command(0x02); // 0x02 = 10b, Page addressing mode send_command(SETCOMPINS); // 0xDA if (LCDHEIGHT > 32) { diff --git a/drivers/sensors/adns5050.c b/drivers/sensors/adns5050.c index e7273977d5..254ef2ee87 100644 --- a/drivers/sensors/adns5050.c +++ b/drivers/sensors/adns5050.c @@ -17,7 +17,6 @@ * along with this program. If not, see . */ - #include "adns5050.h" #include "wait.h" #include "debug.h" @@ -61,13 +60,9 @@ void adns_sync(void) { writePinHigh(ADNS_CS_PIN); } -void adns_cs_select(void) { - writePinLow(ADNS_CS_PIN); -} +void adns_cs_select(void) { writePinLow(ADNS_CS_PIN); } -void adns_cs_deselect(void) { - writePinHigh(ADNS_CS_PIN); -} +void adns_cs_deselect(void) { writePinHigh(ADNS_CS_PIN); } uint8_t adns_serial_read(void) { setPinInput(ADNS_SDIO_PIN); @@ -121,7 +116,7 @@ uint8_t adns_read_reg(uint8_t reg_addr) { // We don't need a minimum tSRAD here. That's because a 4ms wait time is // already included in adns_serial_write(), so we're good. // See page 10 and 15 of the ADNS spec sheet. - //wait_us(4); + // wait_us(4); uint8_t byte = adns_serial_read(); @@ -138,7 +133,7 @@ uint8_t adns_read_reg(uint8_t reg_addr) { void adns_write_reg(uint8_t reg_addr, uint8_t data) { adns_cs_select(); - adns_serial_write( 0b10000000 | reg_addr ); + adns_serial_write(0b10000000 | reg_addr); adns_serial_write(data); adns_cs_deselect(); } @@ -155,7 +150,7 @@ report_adns_t adns_read_burst(void) { // We don't need a minimum tSRAD here. That's because a 4ms wait time is // already included in adns_serial_write(), so we're good. // See page 10 and 15 of the ADNS spec sheet. - //wait_us(4); + // wait_us(4); uint8_t x = adns_serial_read(); uint8_t y = adns_serial_read(); @@ -180,13 +175,11 @@ int8_t convert_twoscomp(uint8_t data) { } // Don't forget to use the definitions for CPI in the header file. -void adns_set_cpi(uint8_t cpi) { - adns_write_reg(REG_MOUSE_CONTROL2, cpi); -} +void adns_set_cpi(uint8_t cpi) { adns_write_reg(REG_MOUSE_CONTROL2, cpi); } bool adns_check_signature(void) { - uint8_t pid = adns_read_reg(REG_PRODUCT_ID); - uint8_t rid = adns_read_reg(REG_REVISION_ID); + uint8_t pid = adns_read_reg(REG_PRODUCT_ID); + uint8_t rid = adns_read_reg(REG_REVISION_ID); uint8_t pid2 = adns_read_reg(REG_PRODUCT_ID2); return (pid == 0x12 && rid == 0x01 && pid2 == 0x26); diff --git a/drivers/sensors/adns5050.h b/drivers/sensors/adns5050.h index ff8e8f78e9..5e9edc2962 100644 --- a/drivers/sensors/adns5050.h +++ b/drivers/sensors/adns5050.h @@ -67,13 +67,13 @@ typedef struct { // A bunch of functions to implement the ADNS5050-specific serial protocol. // Note that the "serial.h" driver is insufficient, because it does not // manually manipulate a serial clock signal. -void adns_init(void); -void adns_sync(void); -uint8_t adns_serial_read(void); -void adns_serial_write(uint8_t data); -uint8_t adns_read_reg(uint8_t reg_addr); -void adns_write_reg(uint8_t reg_addr, uint8_t data); +void adns_init(void); +void adns_sync(void); +uint8_t adns_serial_read(void); +void adns_serial_write(uint8_t data); +uint8_t adns_read_reg(uint8_t reg_addr); +void adns_write_reg(uint8_t reg_addr, uint8_t data); report_adns_t adns_read_burst(void); -int8_t convert_twoscomp(uint8_t data); -void adns_set_cpi(uint8_t cpi); -bool adns_check_signature(void); +int8_t convert_twoscomp(uint8_t data); +void adns_set_cpi(uint8_t cpi); +bool adns_check_signature(void); diff --git a/drivers/sensors/adns9800.c b/drivers/sensors/adns9800.c index 17966b81f9..b4f683452c 100644 --- a/drivers/sensors/adns9800.c +++ b/drivers/sensors/adns9800.c @@ -20,57 +20,57 @@ #include "adns9800.h" // registers -#define REG_Product_ID 0x00 -#define REG_Revision_ID 0x01 -#define REG_Motion 0x02 -#define REG_Delta_X_L 0x03 -#define REG_Delta_X_H 0x04 -#define REG_Delta_Y_L 0x05 -#define REG_Delta_Y_H 0x06 -#define REG_SQUAL 0x07 -#define REG_Pixel_Sum 0x08 -#define REG_Maximum_Pixel 0x09 -#define REG_Minimum_Pixel 0x0a -#define REG_Shutter_Lower 0x0b -#define REG_Shutter_Upper 0x0c -#define REG_Frame_Period_Lower 0x0d -#define REG_Frame_Period_Upper 0x0e -#define REG_Configuration_I 0x0f -#define REG_Configuration_II 0x10 -#define REG_Frame_Capture 0x12 -#define REG_SROM_Enable 0x13 -#define REG_Run_Downshift 0x14 -#define REG_Rest1_Rate 0x15 -#define REG_Rest1_Downshift 0x16 -#define REG_Rest2_Rate 0x17 -#define REG_Rest2_Downshift 0x18 -#define REG_Rest3_Rate 0x19 -#define REG_Frame_Period_Max_Bound_Lower 0x1a -#define REG_Frame_Period_Max_Bound_Upper 0x1b -#define REG_Frame_Period_Min_Bound_Lower 0x1c -#define REG_Frame_Period_Min_Bound_Upper 0x1d -#define REG_Shutter_Max_Bound_Lower 0x1e -#define REG_Shutter_Max_Bound_Upper 0x1f -#define REG_LASER_CTRL0 0x20 -#define REG_Observation 0x24 -#define REG_Data_Out_Lower 0x25 -#define REG_Data_Out_Upper 0x26 -#define REG_SROM_ID 0x2a -#define REG_Lift_Detection_Thr 0x2e -#define REG_Configuration_V 0x2f -#define REG_Configuration_IV 0x39 -#define REG_Power_Up_Reset 0x3a -#define REG_Shutdown 0x3b -#define REG_Inverse_Product_ID 0x3f -#define REG_Motion_Burst 0x50 -#define REG_SROM_Load_Burst 0x62 -#define REG_Pixel_Burst 0x64 +#define REG_Product_ID 0x00 +#define REG_Revision_ID 0x01 +#define REG_Motion 0x02 +#define REG_Delta_X_L 0x03 +#define REG_Delta_X_H 0x04 +#define REG_Delta_Y_L 0x05 +#define REG_Delta_Y_H 0x06 +#define REG_SQUAL 0x07 +#define REG_Pixel_Sum 0x08 +#define REG_Maximum_Pixel 0x09 +#define REG_Minimum_Pixel 0x0a +#define REG_Shutter_Lower 0x0b +#define REG_Shutter_Upper 0x0c +#define REG_Frame_Period_Lower 0x0d +#define REG_Frame_Period_Upper 0x0e +#define REG_Configuration_I 0x0f +#define REG_Configuration_II 0x10 +#define REG_Frame_Capture 0x12 +#define REG_SROM_Enable 0x13 +#define REG_Run_Downshift 0x14 +#define REG_Rest1_Rate 0x15 +#define REG_Rest1_Downshift 0x16 +#define REG_Rest2_Rate 0x17 +#define REG_Rest2_Downshift 0x18 +#define REG_Rest3_Rate 0x19 +#define REG_Frame_Period_Max_Bound_Lower 0x1a +#define REG_Frame_Period_Max_Bound_Upper 0x1b +#define REG_Frame_Period_Min_Bound_Lower 0x1c +#define REG_Frame_Period_Min_Bound_Upper 0x1d +#define REG_Shutter_Max_Bound_Lower 0x1e +#define REG_Shutter_Max_Bound_Upper 0x1f +#define REG_LASER_CTRL0 0x20 +#define REG_Observation 0x24 +#define REG_Data_Out_Lower 0x25 +#define REG_Data_Out_Upper 0x26 +#define REG_SROM_ID 0x2a +#define REG_Lift_Detection_Thr 0x2e +#define REG_Configuration_V 0x2f +#define REG_Configuration_IV 0x39 +#define REG_Power_Up_Reset 0x3a +#define REG_Shutdown 0x3b +#define REG_Inverse_Product_ID 0x3f +#define REG_Motion_Burst 0x50 +#define REG_SROM_Load_Burst 0x62 +#define REG_Pixel_Burst 0x64 #define ADNS_CLOCK_SPEED 2000000 #define MIN_CPI 200 #define MAX_CPI 8200 #define CPI_STEP 200 -#define CLAMP_CPI(value) value < MIN_CPI ? MIN_CPI : value > MAX_CPI ? MAX_CPI : value +#define CLAMP_CPI(value) value MAX_CPI ? MAX_CPI : value #define SPI_MODE 3 #define SPI_DIVISOR (F_CPU / ADNS_CLOCK_SPEED) #define US_BETWEEN_WRITES 120 @@ -80,12 +80,9 @@ extern const uint8_t firmware_data[]; -void adns_spi_start(void){ - spi_start(SPI_SS_PIN, false, SPI_MODE, SPI_DIVISOR); -} - -void adns_write(uint8_t reg_addr, uint8_t data){ +void adns_spi_start(void) { spi_start(SPI_SS_PIN, false, SPI_MODE, SPI_DIVISOR); } +void adns_write(uint8_t reg_addr, uint8_t data) { adns_spi_start(); spi_write(reg_addr | MSB1); spi_write(data); @@ -93,10 +90,9 @@ void adns_write(uint8_t reg_addr, uint8_t data){ wait_us(US_BETWEEN_WRITES); } -uint8_t adns_read(uint8_t reg_addr){ - +uint8_t adns_read(uint8_t reg_addr) { adns_spi_start(); - spi_write(reg_addr & 0x7f ); + spi_write(reg_addr & 0x7f); uint8_t data = spi_read(); spi_stop(); wait_us(US_BETWEEN_READS); @@ -105,7 +101,6 @@ uint8_t adns_read(uint8_t reg_addr){ } void adns_init() { - setPinOutput(SPI_SS_PIN); spi_init(); @@ -144,7 +139,7 @@ void adns_init() { // send all bytes of the firmware unsigned char c; - for(int i = 0; i < FIRMWARE_LENGTH; i++){ + for (int i = 0; i < FIRMWARE_LENGTH; i++) { c = (unsigned char)pgm_read_byte(firmware_data + i); spi_write(c); wait_us(15); @@ -161,7 +156,7 @@ void adns_init() { config_adns_t adns_get_config(void) { uint8_t config_1 = adns_read(REG_Configuration_I); - return (config_adns_t){ (config_1 & 0xFF) * CPI_STEP }; + return (config_adns_t){(config_1 & 0xFF) * CPI_STEP}; } void adns_set_config(config_adns_t config) { @@ -169,20 +164,17 @@ void adns_set_config(config_adns_t config) { adns_write(REG_Configuration_I, config_1); } -static int16_t convertDeltaToInt(uint8_t high, uint8_t low){ - +static int16_t convertDeltaToInt(uint8_t high, uint8_t low) { // join bytes into twos compliment uint16_t twos_comp = (high << 8) | low; // convert twos comp to int - if (twos_comp & 0x8000) - return -1 * (~twos_comp + 1); + if (twos_comp & 0x8000) return -1 * (~twos_comp + 1); return twos_comp; } report_adns_t adns_get_report(void) { - report_adns_t report = {0, 0}; adns_spi_start(); @@ -194,8 +186,7 @@ report_adns_t adns_get_report(void) { uint8_t motion = spi_read(); - if(motion & 0x80) { - + if (motion & 0x80) { // clear observation register spi_read(); diff --git a/drivers/sensors/adns9800.h b/drivers/sensors/adns9800.h index 2f50b8f1be..d19ded4012 100644 --- a/drivers/sensors/adns9800.h +++ b/drivers/sensors/adns9800.h @@ -28,8 +28,8 @@ typedef struct { int16_t y; } report_adns_t; -void adns_init(void); +void adns_init(void); config_adns_t adns_get_config(void); -void adns_set_config(config_adns_t); +void adns_set_config(config_adns_t); /* Reads and clears the current delta values on the ADNS sensor */ report_adns_t adns_get_report(void); diff --git a/drivers/sensors/pmw3360.c b/drivers/sensors/pmw3360.c index 5463bfc594..79b653e452 100644 --- a/drivers/sensors/pmw3360.c +++ b/drivers/sensors/pmw3360.c @@ -23,55 +23,55 @@ #include "pmw3360_firmware.h" // Registers -#define REG_Product_ID 0x00 -#define REG_Revision_ID 0x01 -#define REG_Motion 0x02 -#define REG_Delta_X_L 0x03 -#define REG_Delta_X_H 0x04 -#define REG_Delta_Y_L 0x05 -#define REG_Delta_Y_H 0x06 -#define REG_SQUAL 0x07 -#define REG_Raw_Data_Sum 0x08 -#define REG_Maximum_Raw_data 0x09 -#define REG_Minimum_Raw_data 0x0A -#define REG_Shutter_Lower 0x0B -#define REG_Shutter_Upper 0x0C -#define REG_Control 0x0D -#define REG_Config1 0x0F -#define REG_Config2 0x10 -#define REG_Angle_Tune 0x11 -#define REG_Frame_Capture 0x12 -#define REG_SROM_Enable 0x13 -#define REG_Run_Downshift 0x14 -#define REG_Rest1_Rate_Lower 0x15 -#define REG_Rest1_Rate_Upper 0x16 -#define REG_Rest1_Downshift 0x17 -#define REG_Rest2_Rate_Lower 0x18 -#define REG_Rest2_Rate_Upper 0x19 -#define REG_Rest2_Downshift 0x1A -#define REG_Rest3_Rate_Lower 0x1B -#define REG_Rest3_Rate_Upper 0x1C -#define REG_Observation 0x24 -#define REG_Data_Out_Lower 0x25 -#define REG_Data_Out_Upper 0x26 -#define REG_Raw_Data_Dump 0x29 -#define REG_SROM_ID 0x2A -#define REG_Min_SQ_Run 0x2B -#define REG_Raw_Data_Threshold 0x2C -#define REG_Config5 0x2F -#define REG_Power_Up_Reset 0x3A -#define REG_Shutdown 0x3B -#define REG_Inverse_Product_ID 0x3F -#define REG_LiftCutoff_Tune3 0x41 -#define REG_Angle_Snap 0x42 -#define REG_LiftCutoff_Tune1 0x4A -#define REG_Motion_Burst 0x50 -#define REG_LiftCutoff_Tune_Timeout 0x58 +#define REG_Product_ID 0x00 +#define REG_Revision_ID 0x01 +#define REG_Motion 0x02 +#define REG_Delta_X_L 0x03 +#define REG_Delta_X_H 0x04 +#define REG_Delta_Y_L 0x05 +#define REG_Delta_Y_H 0x06 +#define REG_SQUAL 0x07 +#define REG_Raw_Data_Sum 0x08 +#define REG_Maximum_Raw_data 0x09 +#define REG_Minimum_Raw_data 0x0A +#define REG_Shutter_Lower 0x0B +#define REG_Shutter_Upper 0x0C +#define REG_Control 0x0D +#define REG_Config1 0x0F +#define REG_Config2 0x10 +#define REG_Angle_Tune 0x11 +#define REG_Frame_Capture 0x12 +#define REG_SROM_Enable 0x13 +#define REG_Run_Downshift 0x14 +#define REG_Rest1_Rate_Lower 0x15 +#define REG_Rest1_Rate_Upper 0x16 +#define REG_Rest1_Downshift 0x17 +#define REG_Rest2_Rate_Lower 0x18 +#define REG_Rest2_Rate_Upper 0x19 +#define REG_Rest2_Downshift 0x1A +#define REG_Rest3_Rate_Lower 0x1B +#define REG_Rest3_Rate_Upper 0x1C +#define REG_Observation 0x24 +#define REG_Data_Out_Lower 0x25 +#define REG_Data_Out_Upper 0x26 +#define REG_Raw_Data_Dump 0x29 +#define REG_SROM_ID 0x2A +#define REG_Min_SQ_Run 0x2B +#define REG_Raw_Data_Threshold 0x2C +#define REG_Config5 0x2F +#define REG_Power_Up_Reset 0x3A +#define REG_Shutdown 0x3B +#define REG_Inverse_Product_ID 0x3F +#define REG_LiftCutoff_Tune3 0x41 +#define REG_Angle_Snap 0x42 +#define REG_LiftCutoff_Tune1 0x4A +#define REG_Motion_Burst 0x50 +#define REG_LiftCutoff_Tune_Timeout 0x58 #define REG_LiftCutoff_Tune_Min_Length 0x5A -#define REG_SROM_Load_Burst 0x62 -#define REG_Lift_Config 0x63 -#define REG_Raw_Data_Burst 0x64 -#define REG_LiftCutoff_Tune2 0x65 +#define REG_SROM_Load_Burst 0x62 +#define REG_Lift_Config 0x63 +#define REG_Raw_Data_Burst 0x64 +#define REG_LiftCutoff_Tune2 0x65 bool _inBurst = false; diff --git a/drivers/sensors/pmw3360.h b/drivers/sensors/pmw3360.h index 124c62cf00..7429a6ba09 100644 --- a/drivers/sensors/pmw3360.h +++ b/drivers/sensors/pmw3360.h @@ -66,20 +66,17 @@ typedef struct { int8_t mdy; } report_pmw_t; - - -bool spi_start_adv(void); -void spi_stop_adv(void); +bool spi_start_adv(void); +void spi_stop_adv(void); spi_status_t spi_write_adv(uint8_t reg_addr, uint8_t data); -uint8_t spi_read_adv(uint8_t reg_addr); -bool pmw_spi_init(void); -void pmw_set_cpi(uint16_t cpi); -uint16_t pmw_get_cpi(void); -void pmw_upload_firmware(void); -bool pmw_check_signature(void); +uint8_t spi_read_adv(uint8_t reg_addr); +bool pmw_spi_init(void); +void pmw_set_cpi(uint16_t cpi); +uint16_t pmw_get_cpi(void); +void pmw_upload_firmware(void); +bool pmw_check_signature(void); report_pmw_t pmw_read_burst(void); - #define degToRad(angleInDegrees) ((angleInDegrees)*M_PI / 180.0) #define radToDeg(angleInRadians) ((angleInRadians)*180.0 / M_PI) #define constrain(amt, low, high) ((amt) < (low) ? (low) : ((amt) > (high) ? (high) : (amt))) diff --git a/keyboards/checkerboards/phoenix45_ortho/keymaps/via/rules.mk b/keyboards/checkerboards/phoenix45_ortho/keymaps/via/rules.mk index 69de2e4c5a..1e5b99807c 100644 --- a/keyboards/checkerboards/phoenix45_ortho/keymaps/via/rules.mk +++ b/keyboards/checkerboards/phoenix45_ortho/keymaps/via/rules.mk @@ -1 +1 @@ -VIA_ENABLE = yes +VIA_ENABLE = yes diff --git a/keyboards/sneakbox/ava/info.json b/keyboards/sneakbox/ava/info.json index 55b52a5c55..276efce018 100644 --- a/keyboards/sneakbox/ava/info.json +++ b/keyboards/sneakbox/ava/info.json @@ -1,4 +1,4 @@ -{ +{ "keyboard_name": "AVA", "url": "https://sneakbox.com", "maintainer": "mujimanic", diff --git a/platforms/chibios/drivers/analog.c b/platforms/chibios/drivers/analog.c index 8c476fcac2..b1081623d3 100644 --- a/platforms/chibios/drivers/analog.c +++ b/platforms/chibios/drivers/analog.c @@ -123,7 +123,7 @@ static ADCConversionGroup adcConversionGroup = { .smpr = ADC_SAMPLING_RATE, #elif defined(USE_ADCV2) # if !defined(STM32F1XX) - .cr2 = ADC_CR2_SWSTART, // F103 seem very unhappy with, F401 seems very unhappy without... + .cr2 = ADC_CR2_SWSTART, // F103 seem very unhappy with, F401 seems very unhappy without... # endif .smpr2 = ADC_SMPR2_SMP_AN0(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN1(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN2(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN3(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN4(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN5(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN6(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN7(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN8(ADC_SAMPLING_RATE) | ADC_SMPR2_SMP_AN9(ADC_SAMPLING_RATE), .smpr1 = ADC_SMPR1_SMP_AN10(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN11(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN12(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN13(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN14(ADC_SAMPLING_RATE) | ADC_SMPR1_SMP_AN15(ADC_SAMPLING_RATE), diff --git a/quantum/action.c b/quantum/action.c index be135f18f2..208690f5e4 100644 --- a/quantum/action.c +++ b/quantum/action.c @@ -782,9 +782,10 @@ void register_code(uint8_t code) { } #endif - else if IS_KEY (code) { - // TODO: should push command_proc out of this block? - if (command_proc(code)) return; + else if + IS_KEY(code) { + // TODO: should push command_proc out of this block? + if (command_proc(code)) return; #ifndef NO_ACTION_ONESHOT /* TODO: remove @@ -801,33 +802,35 @@ void register_code(uint8_t code) { } else */ #endif - { - // Force a new key press if the key is already pressed - // without this, keys with the same keycode, but different - // modifiers will be reported incorrectly, see issue #1708 - if (is_key_pressed(keyboard_report, code)) { - del_key(code); + { + // Force a new key press if the key is already pressed + // without this, keys with the same keycode, but different + // modifiers will be reported incorrectly, see issue #1708 + if (is_key_pressed(keyboard_report, code)) { + del_key(code); + send_keyboard_report(); + } + add_key(code); send_keyboard_report(); } - add_key(code); + } + else if + IS_MOD(code) { + add_mods(MOD_BIT(code)); send_keyboard_report(); } - } else if IS_MOD (code) { - add_mods(MOD_BIT(code)); - send_keyboard_report(); - } #ifdef EXTRAKEY_ENABLE - else if IS_SYSTEM (code) { - host_system_send(KEYCODE2SYSTEM(code)); - } else if IS_CONSUMER (code) { - host_consumer_send(KEYCODE2CONSUMER(code)); - } + else if + IS_SYSTEM(code) { host_system_send(KEYCODE2SYSTEM(code)); } + else if + IS_CONSUMER(code) { host_consumer_send(KEYCODE2CONSUMER(code)); } #endif #ifdef MOUSEKEY_ENABLE - else if IS_MOUSEKEY (code) { - mousekey_on(code); - mousekey_send(); - } + else if + IS_MOUSEKEY(code) { + mousekey_on(code); + mousekey_send(); + } #endif } @@ -872,22 +875,26 @@ void unregister_code(uint8_t code) { } #endif - else if IS_KEY (code) { - del_key(code); - send_keyboard_report(); - } else if IS_MOD (code) { - del_mods(MOD_BIT(code)); - send_keyboard_report(); - } else if IS_SYSTEM (code) { - host_system_send(0); - } else if IS_CONSUMER (code) { - host_consumer_send(0); - } + else if + IS_KEY(code) { + del_key(code); + send_keyboard_report(); + } + else if + IS_MOD(code) { + del_mods(MOD_BIT(code)); + send_keyboard_report(); + } + else if + IS_SYSTEM(code) { host_system_send(0); } + else if + IS_CONSUMER(code) { host_consumer_send(0); } #ifdef MOUSEKEY_ENABLE - else if IS_MOUSEKEY (code) { - mousekey_off(code); - mousekey_send(); - } + else if + IS_MOUSEKEY(code) { + mousekey_off(code); + mousekey_send(); + } #endif } diff --git a/quantum/action.h b/quantum/action.h index 8a357ded87..b562f18c5b 100644 --- a/quantum/action.h +++ b/quantum/action.h @@ -88,7 +88,7 @@ extern bool disable_action_cache; /* Code for handling one-handed key modifiers. */ #ifdef SWAP_HANDS_ENABLE -extern bool swap_hands; +extern bool swap_hands; extern const keypos_t PROGMEM hand_swap_config[MATRIX_ROWS][MATRIX_COLS]; # if (MATRIX_COLS <= 8) typedef uint8_t swap_state_row_t; diff --git a/quantum/action_tapping.c b/quantum/action_tapping.c index 36839f9faf..60e56fb811 100644 --- a/quantum/action_tapping.c +++ b/quantum/action_tapping.c @@ -18,11 +18,11 @@ # define IS_TAPPING_PRESSED() (IS_TAPPING() && tapping_key.event.pressed) # define IS_TAPPING_RELEASED() (IS_TAPPING() && !tapping_key.event.pressed) # define IS_TAPPING_KEY(k) (IS_TAPPING() && KEYEQ(tapping_key.event.key, (k))) -#ifndef COMBO_ENABLE -# define IS_TAPPING_RECORD(r) (IS_TAPPING() && KEYEQ(tapping_key.event.key, (r->event.key))) -#else -# define IS_TAPPING_RECORD(r) (IS_TAPPING() && KEYEQ(tapping_key.event.key, (r->event.key)) && tapping_key.keycode == r->keycode) -#endif +# ifndef COMBO_ENABLE +# define IS_TAPPING_RECORD(r) (IS_TAPPING() && KEYEQ(tapping_key.event.key, (r->event.key))) +# else +# define IS_TAPPING_RECORD(r) (IS_TAPPING() && KEYEQ(tapping_key.event.key, (r->event.key)) && tapping_key.keycode == r->keycode) +# endif __attribute__((weak)) uint16_t get_tapping_term(uint16_t keycode, keyrecord_t *record) { return TAPPING_TERM; } @@ -212,11 +212,15 @@ bool process_tapping(keyrecord_t *keyp) { if (tapping_key.tap.count > 1) { debug("Tapping: Start new tap with releasing last tap(>1).\n"); // unregister key - process_record(&(keyrecord_t){.tap = tapping_key.tap, .event.key = tapping_key.event.key, .event.time = event.time, .event.pressed = false, -#ifdef COMBO_ENABLE - .keycode = tapping_key.keycode, -#endif - }); + process_record(&(keyrecord_t){ + .tap = tapping_key.tap, + .event.key = tapping_key.event.key, + .event.time = event.time, + .event.pressed = false, +# ifdef COMBO_ENABLE + .keycode = tapping_key.keycode, +# endif + }); } else { debug("Tapping: Start while last tap(1).\n"); } @@ -254,11 +258,15 @@ bool process_tapping(keyrecord_t *keyp) { if (tapping_key.tap.count > 1) { debug("Tapping: Start new tap with releasing last timeout tap(>1).\n"); // unregister key - process_record(&(keyrecord_t){.tap = tapping_key.tap, .event.key = tapping_key.event.key, .event.time = event.time, .event.pressed = false, -#ifdef COMBO_ENABLE - .keycode = tapping_key.keycode, -#endif - }); + process_record(&(keyrecord_t){ + .tap = tapping_key.tap, + .event.key = tapping_key.event.key, + .event.time = event.time, + .event.pressed = false, +# ifdef COMBO_ENABLE + .keycode = tapping_key.keycode, +# endif + }); } else { debug("Tapping: Start while last timeout tap(1).\n"); } diff --git a/quantum/debounce/asym_eager_defer_pk.c b/quantum/debounce/asym_eager_defer_pk.c index 24380dc5e5..81f39383c4 100644 --- a/quantum/debounce/asym_eager_defer_pk.c +++ b/quantum/debounce/asym_eager_defer_pk.c @@ -46,17 +46,17 @@ When no state changes have occured for DEBOUNCE milliseconds, we push the state. #define ROW_SHIFTER ((matrix_row_t)1) typedef struct { - bool pressed : 1; + bool pressed : 1; uint8_t time : 7; } debounce_counter_t; #if DEBOUNCE > 0 static debounce_counter_t *debounce_counters; -static fast_timer_t last_time; -static bool counters_need_update; -static bool matrix_need_update; +static fast_timer_t last_time; +static bool counters_need_update; +static bool matrix_need_update; -#define DEBOUNCE_ELAPSED 0 +# define DEBOUNCE_ELAPSED 0 static void update_debounce_counters_and_transfer_if_expired(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, uint8_t elapsed_time); static void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows); @@ -64,7 +64,7 @@ static void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], ui // we use num_rows rather than MATRIX_ROWS to support split keyboards void debounce_init(uint8_t num_rows) { debounce_counters = malloc(num_rows * MATRIX_COLS * sizeof(debounce_counter_t)); - int i = 0; + int i = 0; for (uint8_t r = 0; r < num_rows; r++) { for (uint8_t c = 0; c < MATRIX_COLS; c++) { debounce_counters[i++].time = DEBOUNCE_ELAPSED; @@ -81,10 +81,10 @@ void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool bool updated_last = false; if (counters_need_update) { - fast_timer_t now = timer_read_fast(); + fast_timer_t now = timer_read_fast(); fast_timer_t elapsed_time = TIMER_DIFF_FAST(now, last_time); - last_time = now; + last_time = now; updated_last = true; if (elapsed_time > UINT8_MAX) { elapsed_time = UINT8_MAX; @@ -108,7 +108,7 @@ static void update_debounce_counters_and_transfer_if_expired(matrix_row_t raw[], debounce_counter_t *debounce_pointer = debounce_counters; counters_need_update = false; - matrix_need_update = false; + matrix_need_update = false; for (uint8_t row = 0; row < num_rows; row++) { for (uint8_t col = 0; col < MATRIX_COLS; col++) { @@ -146,8 +146,8 @@ static void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], ui if (delta & col_mask) { if (debounce_pointer->time == DEBOUNCE_ELAPSED) { debounce_pointer->pressed = (raw[row] & col_mask); - debounce_pointer->time = DEBOUNCE; - counters_need_update = true; + debounce_pointer->time = DEBOUNCE; + counters_need_update = true; if (debounce_pointer->pressed) { // key-down: eager diff --git a/quantum/debounce/sym_defer_g.c b/quantum/debounce/sym_defer_g.c index fbefd55ede..9155eb914c 100644 --- a/quantum/debounce/sym_defer_g.c +++ b/quantum/debounce/sym_defer_g.c @@ -25,7 +25,7 @@ When no state changes have occured for DEBOUNCE milliseconds, we push the state. #endif #if DEBOUNCE > 0 -static bool debouncing = false; +static bool debouncing = false; static fast_timer_t debouncing_time; void debounce_init(uint8_t num_rows) {} diff --git a/quantum/debounce/sym_defer_pk.c b/quantum/debounce/sym_defer_pk.c index 626a9be841..1b698ba347 100644 --- a/quantum/debounce/sym_defer_pk.c +++ b/quantum/debounce/sym_defer_pk.c @@ -49,7 +49,7 @@ static debounce_counter_t *debounce_counters; static fast_timer_t last_time; static bool counters_need_update; -#define DEBOUNCE_ELAPSED 0 +# define DEBOUNCE_ELAPSED 0 static void update_debounce_counters_and_transfer_if_expired(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, uint8_t elapsed_time); static void start_debounce_counters(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows); @@ -74,10 +74,10 @@ void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool bool updated_last = false; if (counters_need_update) { - fast_timer_t now = timer_read_fast(); + fast_timer_t now = timer_read_fast(); fast_timer_t elapsed_time = TIMER_DIFF_FAST(now, last_time); - last_time = now; + last_time = now; updated_last = true; if (elapsed_time > UINT8_MAX) { elapsed_time = UINT8_MAX; diff --git a/quantum/debounce/sym_eager_pk.c b/quantum/debounce/sym_eager_pk.c index 15a3242e68..9da000ea9a 100644 --- a/quantum/debounce/sym_eager_pk.c +++ b/quantum/debounce/sym_eager_pk.c @@ -50,7 +50,7 @@ static fast_timer_t last_time; static bool counters_need_update; static bool matrix_need_update; -#define DEBOUNCE_ELAPSED 0 +# define DEBOUNCE_ELAPSED 0 static void update_debounce_counters(uint8_t num_rows, uint8_t elapsed_time); static void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows); @@ -75,10 +75,10 @@ void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool bool updated_last = false; if (counters_need_update) { - fast_timer_t now = timer_read_fast(); + fast_timer_t now = timer_read_fast(); fast_timer_t elapsed_time = TIMER_DIFF_FAST(now, last_time); - last_time = now; + last_time = now; updated_last = true; if (elapsed_time > UINT8_MAX) { elapsed_time = UINT8_MAX; @@ -107,7 +107,7 @@ static void update_debounce_counters(uint8_t num_rows, uint8_t elapsed_time) { for (uint8_t col = 0; col < MATRIX_COLS; col++) { if (*debounce_pointer != DEBOUNCE_ELAPSED) { if (*debounce_pointer <= elapsed_time) { - *debounce_pointer = DEBOUNCE_ELAPSED; + *debounce_pointer = DEBOUNCE_ELAPSED; matrix_need_update = true; } else { *debounce_pointer -= elapsed_time; diff --git a/quantum/debounce/sym_eager_pr.c b/quantum/debounce/sym_eager_pr.c index 2ad592c5a6..eda92a263b 100644 --- a/quantum/debounce/sym_eager_pr.c +++ b/quantum/debounce/sym_eager_pr.c @@ -49,7 +49,7 @@ static debounce_counter_t *debounce_counters; static fast_timer_t last_time; static bool counters_need_update; -#define DEBOUNCE_ELAPSED 0 +# define DEBOUNCE_ELAPSED 0 static void update_debounce_counters(uint8_t num_rows, uint8_t elapsed_time); static void transfer_matrix_values(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows); @@ -71,10 +71,10 @@ void debounce(matrix_row_t raw[], matrix_row_t cooked[], uint8_t num_rows, bool bool updated_last = false; if (counters_need_update) { - fast_timer_t now = timer_read_fast(); + fast_timer_t now = timer_read_fast(); fast_timer_t elapsed_time = TIMER_DIFF_FAST(now, last_time); - last_time = now; + last_time = now; updated_last = true; if (elapsed_time > UINT8_MAX) { elapsed_time = UINT8_MAX; @@ -102,7 +102,7 @@ static void update_debounce_counters(uint8_t num_rows, uint8_t elapsed_time) { for (uint8_t row = 0; row < num_rows; row++) { if (*debounce_pointer != DEBOUNCE_ELAPSED) { if (*debounce_pointer <= elapsed_time) { - *debounce_pointer = DEBOUNCE_ELAPSED; + *debounce_pointer = DEBOUNCE_ELAPSED; matrix_need_update = true; } else { *debounce_pointer -= elapsed_time; diff --git a/quantum/debounce/tests/asym_eager_defer_pk_tests.cpp b/quantum/debounce/tests/asym_eager_defer_pk_tests.cpp index fe374c3dfa..44b4fe1956 100644 --- a/quantum/debounce/tests/asym_eager_defer_pk_tests.cpp +++ b/quantum/debounce/tests/asym_eager_defer_pk_tests.cpp @@ -19,7 +19,8 @@ #include "debounce_test_common.h" TEST_F(DebounceTest, OneKeyShort1) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Release key after 1ms delay */ {1, {{0, 1, UP}}, {}}, @@ -43,7 +44,8 @@ TEST_F(DebounceTest, OneKeyShort1) { } TEST_F(DebounceTest, OneKeyShort2) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Release key after 2ms delay */ {2, {{0, 1, UP}}, {}}, @@ -58,7 +60,8 @@ TEST_F(DebounceTest, OneKeyShort2) { } TEST_F(DebounceTest, OneKeyShort3) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Release key after 3ms delay */ {3, {{0, 1, UP}}, {}}, @@ -73,7 +76,8 @@ TEST_F(DebounceTest, OneKeyShort3) { } TEST_F(DebounceTest, OneKeyShort4) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Release key after 4ms delay */ {4, {{0, 1, UP}}, {}}, @@ -88,7 +92,8 @@ TEST_F(DebounceTest, OneKeyShort4) { } TEST_F(DebounceTest, OneKeyShort5) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Release key after 5ms delay */ @@ -102,7 +107,8 @@ TEST_F(DebounceTest, OneKeyShort5) { } TEST_F(DebounceTest, OneKeyShort6) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Release key after 6ms delay */ @@ -116,7 +122,8 @@ TEST_F(DebounceTest, OneKeyShort6) { } TEST_F(DebounceTest, OneKeyShort7) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Release key after 7ms delay */ @@ -130,7 +137,8 @@ TEST_F(DebounceTest, OneKeyShort7) { } TEST_F(DebounceTest, OneKeyShort8) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Release key after 1ms delay */ {1, {{0, 1, UP}}, {}}, @@ -145,7 +153,8 @@ TEST_F(DebounceTest, OneKeyShort8) { } TEST_F(DebounceTest, OneKeyShort9) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Release key after 1ms delay */ {1, {{0, 1, UP}}, {}}, @@ -159,7 +168,8 @@ TEST_F(DebounceTest, OneKeyShort9) { } TEST_F(DebounceTest, OneKeyBouncing1) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {1, {{0, 1, UP}}, {}}, {2, {{0, 1, DOWN}}, {}}, @@ -185,7 +195,8 @@ TEST_F(DebounceTest, OneKeyBouncing1) { } TEST_F(DebounceTest, OneKeyBouncing2) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Change twice in the same time period */ {1, {{0, 1, UP}}, {}}, @@ -217,7 +228,8 @@ TEST_F(DebounceTest, OneKeyBouncing2) { } TEST_F(DebounceTest, OneKeyLong) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {25, {{0, 1, UP}}, {}}, @@ -236,7 +248,8 @@ TEST_F(DebounceTest, OneKeyLong) { } TEST_F(DebounceTest, TwoKeysShort) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {1, {{0, 2, DOWN}}, {{0, 2, DOWN}}}, /* Release key after 2ms delay */ @@ -249,14 +262,14 @@ TEST_F(DebounceTest, TwoKeysShort) { {10, {}, {{0, 1, UP}}}, /* 5ms+5ms after DOWN at time 0 */ /* Press key again after 1ms delay */ {11, {{0, 1, DOWN}}, {{0, 1, DOWN}, {0, 2, UP}}}, /* 5ms+5ms after DOWN at time 0 */ - {12, {{0, 2, DOWN}}, {{0, 2, DOWN}}}, /* 5ms+5ms after DOWN at time 0 */ + {12, {{0, 2, DOWN}}, {{0, 2, DOWN}}}, /* 5ms+5ms after DOWN at time 0 */ }); runEvents(); } - TEST_F(DebounceTest, OneKeyDelayedScan1) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Processing is very late, immediately release key */ @@ -269,7 +282,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan1) { } TEST_F(DebounceTest, OneKeyDelayedScan2) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Processing is very late, immediately release key */ @@ -283,7 +297,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan2) { } TEST_F(DebounceTest, OneKeyDelayedScan3) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Processing is very late */ @@ -298,7 +313,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan3) { } TEST_F(DebounceTest, OneKeyDelayedScan4) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Processing is very late */ @@ -314,7 +330,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan4) { } TEST_F(DebounceTest, OneKeyDelayedScan5) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {5, {{0, 1, UP}}, {}}, @@ -329,7 +346,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan5) { } TEST_F(DebounceTest, OneKeyDelayedScan6) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {5, {{0, 1, UP}}, {}}, @@ -345,7 +363,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan6) { } TEST_F(DebounceTest, OneKeyDelayedScan7) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {5, {{0, 1, UP}}, {}}, @@ -358,7 +377,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan7) { } TEST_F(DebounceTest, OneKeyDelayedScan8) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Processing is a bit late */ diff --git a/quantum/debounce/tests/debounce_test_common.cpp b/quantum/debounce/tests/debounce_test_common.cpp index 1c5e7c9f4e..f9414e571d 100644 --- a/quantum/debounce/tests/debounce_test_common.cpp +++ b/quantum/debounce/tests/debounce_test_common.cpp @@ -31,9 +31,7 @@ void set_time(uint32_t t); void advance_time(uint32_t ms); } -void DebounceTest::addEvents(std::initializer_list events) { - events_.insert(events_.end(), events.begin(), events.end()); -} +void DebounceTest::addEvents(std::initializer_list events) { events_.insert(events_.end(), events.begin(), events.end()); } void DebounceTest::runEvents() { /* Run the test multiple times, from 1kHz to 10kHz scan rate */ @@ -54,7 +52,7 @@ void DebounceTest::runEvents() { void DebounceTest::runEventsInternal() { fast_timer_t previous = 0; - bool first = true; + bool first = true; /* Initialise keyboard with start time (offset to avoid testing at 0) and all keys UP */ debounce_init(MATRIX_ROWS); @@ -80,7 +78,7 @@ void DebounceTest::runEventsInternal() { } } - first = false; + first = false; previous = event.time_; /* Prepare input matrix */ @@ -98,12 +96,7 @@ void DebounceTest::runEventsInternal() { /* Check output matrix has expected change events */ for (auto &output : event.outputs_) { - EXPECT_EQ(!!(cooked_matrix_[output.row_] & (1U << output.col_)), directionValue(output.direction_)) - << "Missing event at " << strTime() - << " expected key " << output.row_ << "," << output.col_ << " " << directionLabel(output.direction_) - << "\ninput_matrix: changed=" << !event.inputs_.empty() << "\n" << strMatrix(input_matrix_) - << "\nexpected_matrix:\n" << strMatrix(output_matrix_) - << "\nactual_matrix:\n" << strMatrix(cooked_matrix_); + EXPECT_EQ(!!(cooked_matrix_[output.row_] & (1U << output.col_)), directionValue(output.direction_)) << "Missing event at " << strTime() << " expected key " << output.row_ << "," << output.col_ << " " << directionLabel(output.direction_) << "\ninput_matrix: changed=" << !event.inputs_.empty() << "\n" << strMatrix(input_matrix_) << "\nexpected_matrix:\n" << strMatrix(output_matrix_) << "\nactual_matrix:\n" << strMatrix(cooked_matrix_); } /* Check output matrix has no other changes */ @@ -133,27 +126,20 @@ void DebounceTest::runDebounce(bool changed) { debounce(raw_matrix_, cooked_matrix_, MATRIX_ROWS, changed); if (!std::equal(std::begin(input_matrix_), std::end(input_matrix_), std::begin(raw_matrix_))) { - FAIL() << "Fatal error: debounce() modified raw matrix at " << strTime() - << "\ninput_matrix: changed=" << changed << "\n" << strMatrix(input_matrix_) - << "\nraw_matrix:\n" << strMatrix(raw_matrix_); + FAIL() << "Fatal error: debounce() modified raw matrix at " << strTime() << "\ninput_matrix: changed=" << changed << "\n" << strMatrix(input_matrix_) << "\nraw_matrix:\n" << strMatrix(raw_matrix_); } } void DebounceTest::checkCookedMatrix(bool changed, const std::string &error_message) { if (!std::equal(std::begin(output_matrix_), std::end(output_matrix_), std::begin(cooked_matrix_))) { - FAIL() << "Unexpected event: " << error_message << " at " << strTime() - << "\ninput_matrix: changed=" << changed << "\n" << strMatrix(input_matrix_) - << "\nexpected_matrix:\n" << strMatrix(output_matrix_) - << "\nactual_matrix:\n" << strMatrix(cooked_matrix_); + FAIL() << "Unexpected event: " << error_message << " at " << strTime() << "\ninput_matrix: changed=" << changed << "\n" << strMatrix(input_matrix_) << "\nexpected_matrix:\n" << strMatrix(output_matrix_) << "\nactual_matrix:\n" << strMatrix(cooked_matrix_); } } std::string DebounceTest::strTime() { std::stringstream text; - text << "time " << (timer_read_fast() - time_offset_) - << " (extra_iterations=" << extra_iterations_ - << ", auto_advance_time=" << auto_advance_time_ << ")"; + text << "time " << (timer_read_fast() - time_offset_) << " (extra_iterations=" << extra_iterations_ << ", auto_advance_time=" << auto_advance_time_ << ")"; return text.str(); } @@ -181,49 +167,39 @@ std::string DebounceTest::strMatrix(matrix_row_t matrix[]) { bool DebounceTest::directionValue(Direction direction) { switch (direction) { - case DOWN: - return true; + case DOWN: + return true; - case UP: - return false; + case UP: + return false; } } std::string DebounceTest::directionLabel(Direction direction) { switch (direction) { - case DOWN: - return "DOWN"; + case DOWN: + return "DOWN"; - case UP: - return "UP"; + case UP: + return "UP"; } } /* Modify a matrix and verify that events always specify a change */ void DebounceTest::matrixUpdate(matrix_row_t matrix[], const std::string &name, const MatrixTestEvent &event) { - ASSERT_NE(!!(matrix[event.row_] & (1U << event.col_)), directionValue(event.direction_)) - << "Test " << name << " at " << strTime() - << " sets key " << event.row_ << "," << event.col_ << " " << directionLabel(event.direction_) - << " but it is already " << directionLabel(event.direction_) - << "\n" << name << "_matrix:\n" << strMatrix(matrix); + ASSERT_NE(!!(matrix[event.row_] & (1U << event.col_)), directionValue(event.direction_)) << "Test " << name << " at " << strTime() << " sets key " << event.row_ << "," << event.col_ << " " << directionLabel(event.direction_) << " but it is already " << directionLabel(event.direction_) << "\n" << name << "_matrix:\n" << strMatrix(matrix); switch (event.direction_) { - case DOWN: - matrix[event.row_] |= (1U << event.col_); - break; + case DOWN: + matrix[event.row_] |= (1U << event.col_); + break; - case UP: - matrix[event.row_] &= ~(1U << event.col_); - break; + case UP: + matrix[event.row_] &= ~(1U << event.col_); + break; } } -DebounceTestEvent::DebounceTestEvent(fast_timer_t time, - std::initializer_list inputs, - std::initializer_list outputs) - : time_(time), inputs_(inputs), outputs_(outputs) { -} +DebounceTestEvent::DebounceTestEvent(fast_timer_t time, std::initializer_list inputs, std::initializer_list outputs) : time_(time), inputs_(inputs), outputs_(outputs) {} -MatrixTestEvent::MatrixTestEvent(int row, int col, Direction direction) - : row_(row), col_(col), direction_(direction) { -} +MatrixTestEvent::MatrixTestEvent(int row, int col, Direction direction) : row_(row), col_(col), direction_(direction) {} diff --git a/quantum/debounce/tests/debounce_test_common.h b/quantum/debounce/tests/debounce_test_common.h index d87e310594..b7becb3782 100644 --- a/quantum/debounce/tests/debounce_test_common.h +++ b/quantum/debounce/tests/debounce_test_common.h @@ -31,36 +31,34 @@ enum Direction { }; class MatrixTestEvent { -public: + public: MatrixTestEvent(int row, int col, Direction direction); - const int row_; - const int col_; + const int row_; + const int col_; const Direction direction_; }; class DebounceTestEvent { -public: + public: // 0, {{0, 1, DOWN}}, {{0, 1, DOWN}}) - DebounceTestEvent(fast_timer_t time, - std::initializer_list inputs, - std::initializer_list outputs); + DebounceTestEvent(fast_timer_t time, std::initializer_list inputs, std::initializer_list outputs); - const fast_timer_t time_; + const fast_timer_t time_; const std::list inputs_; const std::list outputs_; }; class DebounceTest : public ::testing::Test { -protected: + protected: void addEvents(std::initializer_list events); void runEvents(); fast_timer_t time_offset_ = 7777; - bool time_jumps_ = false; + bool time_jumps_ = false; -private: - static bool directionValue(Direction direction); + private: + static bool directionValue(Direction direction); static std::string directionLabel(Direction direction); void runEventsInternal(); @@ -78,6 +76,6 @@ private: matrix_row_t cooked_matrix_[MATRIX_ROWS]; matrix_row_t output_matrix_[MATRIX_ROWS]; - int extra_iterations_; + int extra_iterations_; bool auto_advance_time_; }; diff --git a/quantum/debounce/tests/sym_defer_g_tests.cpp b/quantum/debounce/tests/sym_defer_g_tests.cpp index a56aecd8f3..73d3d45e30 100644 --- a/quantum/debounce/tests/sym_defer_g_tests.cpp +++ b/quantum/debounce/tests/sym_defer_g_tests.cpp @@ -19,7 +19,8 @@ #include "debounce_test_common.h" TEST_F(DebounceTest, OneKeyShort1) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, {5, {}, {{0, 1, DOWN}}}, @@ -32,7 +33,8 @@ TEST_F(DebounceTest, OneKeyShort1) { } TEST_F(DebounceTest, OneKeyShort2) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, {5, {}, {{0, 1, DOWN}}}, @@ -45,7 +47,8 @@ TEST_F(DebounceTest, OneKeyShort2) { } TEST_F(DebounceTest, OneKeyShort3) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, {5, {}, {{0, 1, DOWN}}}, @@ -58,7 +61,8 @@ TEST_F(DebounceTest, OneKeyShort3) { } TEST_F(DebounceTest, OneKeyTooQuick1) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, /* Release key exactly on the debounce time */ {5, {{0, 1, UP}}, {}}, @@ -67,7 +71,8 @@ TEST_F(DebounceTest, OneKeyTooQuick1) { } TEST_F(DebounceTest, OneKeyTooQuick2) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, {5, {}, {{0, 1, DOWN}}}, @@ -80,7 +85,8 @@ TEST_F(DebounceTest, OneKeyTooQuick2) { } TEST_F(DebounceTest, OneKeyBouncing1) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, {1, {{0, 1, UP}}, {}}, {2, {{0, 1, DOWN}}, {}}, @@ -94,7 +100,8 @@ TEST_F(DebounceTest, OneKeyBouncing1) { } TEST_F(DebounceTest, OneKeyBouncing2) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, {5, {}, {{0, 1, DOWN}}}, {6, {{0, 1, UP}}, {}}, @@ -108,7 +115,8 @@ TEST_F(DebounceTest, OneKeyBouncing2) { } TEST_F(DebounceTest, OneKeyLong) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, {5, {}, {{0, 1, DOWN}}}, @@ -125,7 +133,8 @@ TEST_F(DebounceTest, OneKeyLong) { } TEST_F(DebounceTest, TwoKeysShort) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, {1, {{0, 2, DOWN}}, {}}, @@ -140,7 +149,8 @@ TEST_F(DebounceTest, TwoKeysShort) { } TEST_F(DebounceTest, TwoKeysSimultaneous1) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}, {0, 2, DOWN}}, {}}, {5, {}, {{0, 1, DOWN}, {0, 2, DOWN}}}, @@ -152,7 +162,8 @@ TEST_F(DebounceTest, TwoKeysSimultaneous1) { } TEST_F(DebounceTest, TwoKeysSimultaneous2) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, {1, {{0, 2, DOWN}}, {}}, @@ -167,7 +178,8 @@ TEST_F(DebounceTest, TwoKeysSimultaneous2) { } TEST_F(DebounceTest, OneKeyDelayedScan1) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, /* Processing is very late */ @@ -182,7 +194,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan1) { } TEST_F(DebounceTest, OneKeyDelayedScan2) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, /* Processing is very late */ @@ -197,7 +210,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan2) { } TEST_F(DebounceTest, OneKeyDelayedScan3) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, /* Release key before debounce expires */ @@ -208,7 +222,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan3) { } TEST_F(DebounceTest, OneKeyDelayedScan4) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, /* Processing is a bit late */ diff --git a/quantum/debounce/tests/sym_defer_pk_tests.cpp b/quantum/debounce/tests/sym_defer_pk_tests.cpp index 1f3061e59c..7542c2dad4 100644 --- a/quantum/debounce/tests/sym_defer_pk_tests.cpp +++ b/quantum/debounce/tests/sym_defer_pk_tests.cpp @@ -19,7 +19,8 @@ #include "debounce_test_common.h" TEST_F(DebounceTest, OneKeyShort1) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, {5, {}, {{0, 1, DOWN}}}, @@ -32,7 +33,8 @@ TEST_F(DebounceTest, OneKeyShort1) { } TEST_F(DebounceTest, OneKeyShort2) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, {5, {}, {{0, 1, DOWN}}}, @@ -45,7 +47,8 @@ TEST_F(DebounceTest, OneKeyShort2) { } TEST_F(DebounceTest, OneKeyShort3) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, {5, {}, {{0, 1, DOWN}}}, @@ -58,7 +61,8 @@ TEST_F(DebounceTest, OneKeyShort3) { } TEST_F(DebounceTest, OneKeyTooQuick1) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, /* Release key exactly on the debounce time */ {5, {{0, 1, UP}}, {}}, @@ -67,7 +71,8 @@ TEST_F(DebounceTest, OneKeyTooQuick1) { } TEST_F(DebounceTest, OneKeyTooQuick2) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, {5, {}, {{0, 1, DOWN}}}, @@ -80,7 +85,8 @@ TEST_F(DebounceTest, OneKeyTooQuick2) { } TEST_F(DebounceTest, OneKeyBouncing1) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, {1, {{0, 1, UP}}, {}}, {2, {{0, 1, DOWN}}, {}}, @@ -94,7 +100,8 @@ TEST_F(DebounceTest, OneKeyBouncing1) { } TEST_F(DebounceTest, OneKeyBouncing2) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, {5, {}, {{0, 1, DOWN}}}, {6, {{0, 1, UP}}, {}}, @@ -108,7 +115,8 @@ TEST_F(DebounceTest, OneKeyBouncing2) { } TEST_F(DebounceTest, OneKeyLong) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, {5, {}, {{0, 1, DOWN}}}, @@ -125,7 +133,8 @@ TEST_F(DebounceTest, OneKeyLong) { } TEST_F(DebounceTest, TwoKeysShort) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, {1, {{0, 2, DOWN}}, {}}, @@ -142,7 +151,8 @@ TEST_F(DebounceTest, TwoKeysShort) { } TEST_F(DebounceTest, TwoKeysSimultaneous1) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}, {0, 2, DOWN}}, {}}, {5, {}, {{0, 1, DOWN}, {0, 2, DOWN}}}, @@ -154,7 +164,8 @@ TEST_F(DebounceTest, TwoKeysSimultaneous1) { } TEST_F(DebounceTest, TwoKeysSimultaneous2) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, {1, {{0, 2, DOWN}}, {}}, @@ -169,7 +180,8 @@ TEST_F(DebounceTest, TwoKeysSimultaneous2) { } TEST_F(DebounceTest, OneKeyDelayedScan1) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, /* Processing is very late */ @@ -184,7 +196,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan1) { } TEST_F(DebounceTest, OneKeyDelayedScan2) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, /* Processing is very late */ @@ -199,7 +212,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan2) { } TEST_F(DebounceTest, OneKeyDelayedScan3) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, /* Release key before debounce expires */ @@ -210,7 +224,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan3) { } TEST_F(DebounceTest, OneKeyDelayedScan4) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {}}, /* Processing is a bit late */ diff --git a/quantum/debounce/tests/sym_eager_pk_tests.cpp b/quantum/debounce/tests/sym_eager_pk_tests.cpp index e0fc205e33..d9a02fe33c 100644 --- a/quantum/debounce/tests/sym_eager_pk_tests.cpp +++ b/quantum/debounce/tests/sym_eager_pk_tests.cpp @@ -19,7 +19,8 @@ #include "debounce_test_common.h" TEST_F(DebounceTest, OneKeyShort1) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {1, {{0, 1, UP}}, {}}, @@ -32,7 +33,8 @@ TEST_F(DebounceTest, OneKeyShort1) { } TEST_F(DebounceTest, OneKeyShort2) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {1, {{0, 1, UP}}, {}}, @@ -45,7 +47,8 @@ TEST_F(DebounceTest, OneKeyShort2) { } TEST_F(DebounceTest, OneKeyShort3) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {1, {{0, 1, UP}}, {}}, @@ -58,7 +61,8 @@ TEST_F(DebounceTest, OneKeyShort3) { } TEST_F(DebounceTest, OneKeyShort4) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {1, {{0, 1, UP}}, {}}, @@ -71,7 +75,8 @@ TEST_F(DebounceTest, OneKeyShort4) { } TEST_F(DebounceTest, OneKeyShort5) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {1, {{0, 1, UP}}, {}}, @@ -83,7 +88,8 @@ TEST_F(DebounceTest, OneKeyShort5) { } TEST_F(DebounceTest, OneKeyShort6) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {1, {{0, 1, UP}}, {}}, @@ -95,7 +101,8 @@ TEST_F(DebounceTest, OneKeyShort6) { } TEST_F(DebounceTest, OneKeyBouncing1) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {1, {{0, 1, UP}}, {}}, {2, {{0, 1, DOWN}}, {}}, @@ -110,7 +117,8 @@ TEST_F(DebounceTest, OneKeyBouncing1) { } TEST_F(DebounceTest, OneKeyBouncing2) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Change twice in the same time period */ {1, {{0, 1, UP}}, {}}, @@ -135,7 +143,8 @@ TEST_F(DebounceTest, OneKeyBouncing2) { } TEST_F(DebounceTest, OneKeyLong) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {25, {{0, 1, UP}}, {{0, 1, UP}}}, @@ -146,7 +155,8 @@ TEST_F(DebounceTest, OneKeyLong) { } TEST_F(DebounceTest, TwoKeysShort) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {1, {{0, 1, UP}}, {}}, {2, {{0, 2, DOWN}}, {{0, 2, DOWN}}}, @@ -167,7 +177,8 @@ TEST_F(DebounceTest, TwoKeysShort) { } TEST_F(DebounceTest, OneKeyDelayedScan1) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Processing is very late but the change will now be accepted */ @@ -178,7 +189,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan1) { } TEST_F(DebounceTest, OneKeyDelayedScan2) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Processing is very late but the change will now be accepted even with a 1 scan delay */ @@ -190,7 +202,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan2) { } TEST_F(DebounceTest, OneKeyDelayedScan3) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Processing is very late but the change will now be accepted even with a 1ms delay */ @@ -202,7 +215,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan3) { } TEST_F(DebounceTest, OneKeyDelayedScan4) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Processing is a bit late but the change will now be accepted */ @@ -213,7 +227,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan4) { } TEST_F(DebounceTest, OneKeyDelayedScan5) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Processing is very late but the change will now be accepted even with a 1 scan delay */ @@ -225,7 +240,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan5) { } TEST_F(DebounceTest, OneKeyDelayedScan6) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Processing is very late but the change will now be accepted even with a 1ms delay */ diff --git a/quantum/debounce/tests/sym_eager_pr_tests.cpp b/quantum/debounce/tests/sym_eager_pr_tests.cpp index 2c4bca127e..e91dd9cb87 100644 --- a/quantum/debounce/tests/sym_eager_pr_tests.cpp +++ b/quantum/debounce/tests/sym_eager_pr_tests.cpp @@ -19,7 +19,8 @@ #include "debounce_test_common.h" TEST_F(DebounceTest, OneKeyShort1) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {1, {{0, 1, UP}}, {}}, @@ -32,7 +33,8 @@ TEST_F(DebounceTest, OneKeyShort1) { } TEST_F(DebounceTest, OneKeyShort2) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {1, {{0, 1, UP}}, {}}, @@ -45,7 +47,8 @@ TEST_F(DebounceTest, OneKeyShort2) { } TEST_F(DebounceTest, OneKeyShort3) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {1, {{0, 1, UP}}, {}}, @@ -58,7 +61,8 @@ TEST_F(DebounceTest, OneKeyShort3) { } TEST_F(DebounceTest, OneKeyShort4) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {1, {{0, 1, UP}}, {}}, @@ -71,7 +75,8 @@ TEST_F(DebounceTest, OneKeyShort4) { } TEST_F(DebounceTest, OneKeyShort5) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {1, {{0, 1, UP}}, {}}, @@ -83,7 +88,8 @@ TEST_F(DebounceTest, OneKeyShort5) { } TEST_F(DebounceTest, OneKeyShort6) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {1, {{0, 1, UP}}, {}}, @@ -95,7 +101,8 @@ TEST_F(DebounceTest, OneKeyShort6) { } TEST_F(DebounceTest, OneKeyBouncing1) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {1, {{0, 1, UP}}, {}}, {2, {{0, 1, DOWN}}, {}}, @@ -110,7 +117,8 @@ TEST_F(DebounceTest, OneKeyBouncing1) { } TEST_F(DebounceTest, OneKeyBouncing2) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Change twice in the same time period */ {1, {{0, 1, UP}}, {}}, @@ -135,7 +143,8 @@ TEST_F(DebounceTest, OneKeyBouncing2) { } TEST_F(DebounceTest, OneKeyLong) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {25, {{0, 1, UP}}, {{0, 1, UP}}}, @@ -146,7 +155,8 @@ TEST_F(DebounceTest, OneKeyLong) { } TEST_F(DebounceTest, TwoRowsShort) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {1, {{0, 1, UP}}, {}}, {2, {{2, 0, DOWN}}, {{2, 0, DOWN}}}, @@ -167,7 +177,8 @@ TEST_F(DebounceTest, TwoRowsShort) { } TEST_F(DebounceTest, TwoKeysOverlap) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, {1, {{0, 1, UP}}, {}}, /* Press a second key during the first debounce */ @@ -190,7 +201,8 @@ TEST_F(DebounceTest, TwoKeysOverlap) { } TEST_F(DebounceTest, TwoKeysSimultaneous1) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}, {0, 2, DOWN}}, {{0, 1, DOWN}, {0, 2, DOWN}}}, {20, {{0, 1, UP}}, {{0, 1, UP}}}, {21, {{0, 2, UP}}, {}}, @@ -202,7 +214,8 @@ TEST_F(DebounceTest, TwoKeysSimultaneous1) { } TEST_F(DebounceTest, TwoKeysSimultaneous2) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}, {0, 2, DOWN}}, {{0, 1, DOWN}, {0, 2, DOWN}}}, {20, {{0, 1, UP}, {0, 2, UP}}, {{0, 1, UP}, {0, 2, UP}}}, }); @@ -210,7 +223,8 @@ TEST_F(DebounceTest, TwoKeysSimultaneous2) { } TEST_F(DebounceTest, OneKeyDelayedScan1) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Processing is very late but the change will now be accepted */ @@ -221,7 +235,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan1) { } TEST_F(DebounceTest, OneKeyDelayedScan2) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Processing is very late but the change will now be accepted even with a 1 scan delay */ @@ -233,7 +248,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan2) { } TEST_F(DebounceTest, OneKeyDelayedScan3) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Processing is very late but the change will now be accepted even with a 1ms delay */ @@ -245,7 +261,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan3) { } TEST_F(DebounceTest, OneKeyDelayedScan4) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Processing is a bit late but the change will now be accepted */ @@ -256,7 +273,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan4) { } TEST_F(DebounceTest, OneKeyDelayedScan5) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Processing is very late but the change will now be accepted even with a 1 scan delay */ @@ -268,7 +286,8 @@ TEST_F(DebounceTest, OneKeyDelayedScan5) { } TEST_F(DebounceTest, OneKeyDelayedScan6) { - addEvents({ /* Time, Inputs, Outputs */ + addEvents({ + /* Time, Inputs, Outputs */ {0, {{0, 1, DOWN}}, {{0, 1, DOWN}}}, /* Processing is very late but the change will now be accepted even with a 1ms delay */ diff --git a/quantum/keymap_extras/keymap_steno.h b/quantum/keymap_extras/keymap_steno.h index ab95b43fdd..310aa07409 100644 --- a/quantum/keymap_extras/keymap_steno.h +++ b/quantum/keymap_extras/keymap_steno.h @@ -74,8 +74,7 @@ enum steno_keycodes { }; #ifdef STENO_COMBINEDMAP -enum steno_combined_keycodes -{ +enum steno_combined_keycodes { STN_S3 = QK_STENO_COMB, STN_TKL, STN_PWL, diff --git a/quantum/process_keycode/process_combo.c b/quantum/process_keycode/process_combo.c index e8661839c7..a050161edf 100644 --- a/quantum/process_keycode/process_combo.c +++ b/quantum/process_keycode/process_combo.c @@ -18,10 +18,9 @@ #include "process_combo.h" #include "action_tapping.h" - #ifdef COMBO_COUNT -__attribute__((weak)) combo_t key_combos[COMBO_COUNT]; -uint16_t COMBO_LEN = COMBO_COUNT; +__attribute__((weak)) combo_t key_combos[COMBO_COUNT]; +uint16_t COMBO_LEN = COMBO_COUNT; #else extern combo_t key_combos[]; extern uint16_t COMBO_LEN; @@ -46,64 +45,86 @@ __attribute__((weak)) bool process_combo_key_release(uint16_t combo_index, combo #endif #ifndef COMBO_NO_TIMER -static uint16_t timer = 0; +static uint16_t timer = 0; #endif -static bool b_combo_enable = true; // defaults to enabled -static uint16_t longest_term = 0; +static bool b_combo_enable = true; // defaults to enabled +static uint16_t longest_term = 0; typedef struct { keyrecord_t record; - uint16_t combo_index; - uint16_t keycode; + uint16_t combo_index; + uint16_t keycode; } queued_record_t; -static uint8_t key_buffer_size = 0; +static uint8_t key_buffer_size = 0; static queued_record_t key_buffer[COMBO_KEY_BUFFER_LENGTH]; typedef struct { uint16_t combo_index; } queued_combo_t; -static uint8_t combo_buffer_write= 0; -static uint8_t combo_buffer_read = 0; +static uint8_t combo_buffer_write = 0; +static uint8_t combo_buffer_read = 0; static queued_combo_t combo_buffer[COMBO_BUFFER_LENGTH]; #define INCREMENT_MOD(i) i = (i + 1) % COMBO_BUFFER_LENGTH -#define COMBO_KEY_POS ((keypos_t){.col=254, .row=254}) - +#define COMBO_KEY_POS ((keypos_t){.col = 254, .row = 254}) #ifndef EXTRA_SHORT_COMBOS /* flags are their own elements in combo_t struct. */ -# define COMBO_ACTIVE(combo) (combo->active) +# define COMBO_ACTIVE(combo) (combo->active) # define COMBO_DISABLED(combo) (combo->disabled) -# define COMBO_STATE(combo) (combo->state) - -# define ACTIVATE_COMBO(combo) do {combo->active = true;}while(0) -# define DEACTIVATE_COMBO(combo) do {combo->active = false;}while(0) -# define DISABLE_COMBO(combo) do {combo->disabled = true;}while(0) -# define RESET_COMBO_STATE(combo) do { \ - combo->disabled = false; \ - combo->state = 0; \ -}while(0) +# define COMBO_STATE(combo) (combo->state) + +# define ACTIVATE_COMBO(combo) \ + do { \ + combo->active = true; \ + } while (0) +# define DEACTIVATE_COMBO(combo) \ + do { \ + combo->active = false; \ + } while (0) +# define DISABLE_COMBO(combo) \ + do { \ + combo->disabled = true; \ + } while (0) +# define RESET_COMBO_STATE(combo) \ + do { \ + combo->disabled = false; \ + combo->state = 0; \ + } while (0) #else /* flags are at the two high bits of state. */ -# define COMBO_ACTIVE(combo) (combo->state & 0x80) +# define COMBO_ACTIVE(combo) (combo->state & 0x80) # define COMBO_DISABLED(combo) (combo->state & 0x40) -# define COMBO_STATE(combo) (combo->state & 0x3F) - -# define ACTIVATE_COMBO(combo) do {combo->state |= 0x80;}while(0) -# define DEACTIVATE_COMBO(combo) do {combo->state &= ~0x80;}while(0) -# define DISABLE_COMBO(combo) do {combo->state |= 0x40;}while(0) -# define RESET_COMBO_STATE(combo) do {combo->state &= ~0x7F;}while(0) +# define COMBO_STATE(combo) (combo->state & 0x3F) + +# define ACTIVATE_COMBO(combo) \ + do { \ + combo->state |= 0x80; \ + } while (0) +# define DEACTIVATE_COMBO(combo) \ + do { \ + combo->state &= ~0x80; \ + } while (0) +# define DISABLE_COMBO(combo) \ + do { \ + combo->state |= 0x40; \ + } while (0) +# define RESET_COMBO_STATE(combo) \ + do { \ + combo->state &= ~0x7F; \ + } while (0) #endif static inline void release_combo(uint16_t combo_index, combo_t *combo) { if (combo->keycode) { keyrecord_t record = { - .event = { - .key = COMBO_KEY_POS, - .time = timer_read()|1, - .pressed = false, - }, + .event = + { + .key = COMBO_KEY_POS, + .time = timer_read() | 1, + .pressed = false, + }, .keycode = combo->keycode, }; #ifndef NO_ACTION_TAPPING @@ -123,18 +144,17 @@ static inline bool _get_combo_must_hold(uint16_t combo_index, combo_t *combo) { #elif defined(COMBO_MUST_HOLD_PER_COMBO) return get_combo_must_hold(combo_index, combo); #elif defined(COMBO_MUST_HOLD_MODS) - return (KEYCODE_IS_MOD(combo->keycode) || - (combo->keycode >= QK_MOMENTARY && combo->keycode <= QK_MOMENTARY_MAX)); + return (KEYCODE_IS_MOD(combo->keycode) || (combo->keycode >= QK_MOMENTARY && combo->keycode <= QK_MOMENTARY_MAX)); #endif return false; } -static inline uint16_t _get_wait_time(uint16_t combo_index, combo_t *combo ) { +static inline uint16_t _get_wait_time(uint16_t combo_index, combo_t *combo) { if (_get_combo_must_hold(combo_index, combo) #ifdef COMBO_MUST_TAP_PER_COMBO - || get_combo_must_tap(combo_index, combo) + || get_combo_must_tap(combo_index, combo) #endif - ) { + ) { if (longest_term < COMBO_HOLD_TERM) { return COMBO_HOLD_TERM; } @@ -144,9 +164,8 @@ static inline uint16_t _get_wait_time(uint16_t combo_index, combo_t *combo ) { } static inline uint16_t _get_combo_term(uint16_t combo_index, combo_t *combo) { - #if defined(COMBO_TERM_PER_COMBO) - return get_combo_term(combo_index, combo); + return get_combo_term(combo_index, combo); #endif return COMBO_TERM; @@ -154,7 +173,7 @@ static inline uint16_t _get_combo_term(uint16_t combo_index, combo_t *combo) { void clear_combos(void) { uint16_t index = 0; - longest_term = 0; + longest_term = 0; for (index = 0; index < COMBO_LEN; ++index) { combo_t *combo = &key_combos[index]; if (!COMBO_ACTIVE(combo)) { @@ -175,7 +194,7 @@ static inline void dump_key_buffer(void) { key_buffer_next = key_buffer_i + 1; queued_record_t *qrecord = &key_buffer[key_buffer_i]; - keyrecord_t *record = &qrecord->record; + keyrecord_t * record = &qrecord->record; if (IS_NOEVENT(record->event)) { continue; @@ -185,9 +204,9 @@ static inline void dump_key_buffer(void) { process_combo_event(qrecord->combo_index, true); } else { #ifndef NO_ACTION_TAPPING - action_tapping_process(*record); + action_tapping_process(*record); #else - process_record(record); + process_record(record); #endif } record->event.time = 0; @@ -242,7 +261,9 @@ void apply_combo(uint16_t combo_index, combo_t *combo) { /* Apply combo's result keycode to the last chord key of the combo and * disable the other keys. */ - if (COMBO_DISABLED(combo)) { return; } + if (COMBO_DISABLED(combo)) { + return; + } // state to check against so we find the last key of the combo from the buffer #if defined(EXTRA_EXTRA_LONG_COMBOS) @@ -254,12 +275,11 @@ void apply_combo(uint16_t combo_index, combo_t *combo) { #endif for (uint8_t key_buffer_i = 0; key_buffer_i < key_buffer_size; key_buffer_i++) { - queued_record_t *qrecord = &key_buffer[key_buffer_i]; - keyrecord_t *record = &qrecord->record; - uint16_t keycode = qrecord->keycode; + keyrecord_t * record = &qrecord->record; + uint16_t keycode = qrecord->keycode; - uint8_t key_count = 0; + uint8_t key_count = 0; uint16_t key_index = -1; _find_key_index_and_count(combo->keys, keycode, &key_index, &key_count); @@ -271,7 +291,7 @@ void apply_combo(uint16_t combo_index, combo_t *combo) { KEY_STATE_DOWN(state, key_index); if (ALL_COMBO_KEYS_ARE_DOWN(state, key_count)) { // this in the end executes the combo when the key_buffer is dumped. - record->keycode = combo->keycode; + record->keycode = combo->keycode; record->event.key = COMBO_KEY_POS; qrecord->combo_index = combo_index; @@ -283,19 +303,15 @@ void apply_combo(uint16_t combo_index, combo_t *combo) { // by making it a TICK event. record->event.time = 0; } - } drop_combo_from_buffer(combo_index); } static inline void apply_combos(void) { // Apply all buffered normal combos. - for (uint8_t i = combo_buffer_read; - i != combo_buffer_write; - INCREMENT_MOD(i)) { - + for (uint8_t i = combo_buffer_read; i != combo_buffer_write; INCREMENT_MOD(i)) { queued_combo_t *buffered_combo = &combo_buffer[i]; - combo_t *combo = &key_combos[buffered_combo->combo_index]; + combo_t * combo = &key_combos[buffered_combo->combo_index]; #ifdef COMBO_MUST_TAP_PER_COMBO if (get_combo_must_tap(buffered_combo->combo_index, combo)) { @@ -310,15 +326,15 @@ static inline void apply_combos(void) { clear_combos(); } -combo_t* overlaps(combo_t *combo1, combo_t *combo2) { +combo_t *overlaps(combo_t *combo1, combo_t *combo2) { /* Checks if the combos overlap and returns the combo that should be * dropped from the combo buffer. * The combo that has less keys will be dropped. If they have the same * amount of keys, drop combo1. */ - uint8_t idx1 = 0, idx2 = 0; + uint8_t idx1 = 0, idx2 = 0; uint16_t key1, key2; - bool overlaps = false; + bool overlaps = false; while ((key1 = pgm_read_word(&combo1->keys[idx1])) != COMBO_END) { idx2 = 0; @@ -335,7 +351,7 @@ combo_t* overlaps(combo_t *combo1, combo_t *combo2) { } static bool process_single_combo(combo_t *combo, uint16_t keycode, keyrecord_t *record, uint16_t combo_index) { - uint8_t key_count = 0; + uint8_t key_count = 0; uint16_t key_index = -1; _find_key_index_and_count(combo->keys, keycode, &key_index, &key_count); @@ -369,12 +385,9 @@ static bool process_single_combo(combo_t *combo, uint16_t keycode, keyrecord_t * // disable readied combos that overlap with this combo combo_t *drop = NULL; - for (uint8_t combo_buffer_i = combo_buffer_read; - combo_buffer_i != combo_buffer_write; - INCREMENT_MOD(combo_buffer_i)) { - - queued_combo_t *qcombo = &combo_buffer[combo_buffer_i]; - combo_t *buffered_combo = &key_combos[qcombo->combo_index]; + for (uint8_t combo_buffer_i = combo_buffer_read; combo_buffer_i != combo_buffer_write; INCREMENT_MOD(combo_buffer_i)) { + queued_combo_t *qcombo = &combo_buffer[combo_buffer_i]; + combo_t * buffered_combo = &key_combos[qcombo->combo_index]; if ((drop = overlaps(buffered_combo, combo))) { DISABLE_COMBO(drop); @@ -387,21 +400,19 @@ static bool process_single_combo(combo_t *combo, uint16_t keycode, keyrecord_t * INCREMENT_MOD(combo_buffer_read); } } - } if (drop != combo) { // save this combo to buffer combo_buffer[combo_buffer_write] = (queued_combo_t){ - .combo_index=combo_index, + .combo_index = combo_index, }; INCREMENT_MOD(combo_buffer_write); // get possible longer waiting time for tap-/hold-only combos. longest_term = _get_wait_time(combo_index, combo); } - } // if timer elapsed end - + } // if timer elapsed end } } else { // chord releases @@ -416,7 +427,7 @@ static bool process_single_combo(combo_t *combo, uint16_t keycode, keyrecord_t * else if (get_combo_must_tap(combo_index, combo)) { // immediately apply tap-only combo apply_combo(combo_index, combo); - apply_combos(); // also apply other prepared combos and dump key buffer + apply_combos(); // also apply other prepared combos and dump key buffer # ifdef COMBO_PROCESS_KEY_RELEASE if (process_combo_key_release(combo_index, combo, key_index, keycode)) { release_combo(combo_index, combo); @@ -424,10 +435,7 @@ static bool process_single_combo(combo_t *combo, uint16_t keycode, keyrecord_t * # endif } #endif - } else if (COMBO_ACTIVE(combo) - && ONLY_ONE_KEY_IS_DOWN(COMBO_STATE(combo)) - && KEY_NOT_YET_RELEASED(COMBO_STATE(combo), key_index) - ) { + } else if (COMBO_ACTIVE(combo) && ONLY_ONE_KEY_IS_DOWN(COMBO_STATE(combo)) && KEY_NOT_YET_RELEASED(COMBO_STATE(combo), key_index)) { /* last key released */ release_combo(combo_index, combo); key_is_part_of_combo = true; @@ -435,9 +443,7 @@ static bool process_single_combo(combo_t *combo, uint16_t keycode, keyrecord_t * #ifdef COMBO_PROCESS_KEY_RELEASE process_combo_key_release(combo_index, combo, key_index, keycode); #endif - } else if (COMBO_ACTIVE(combo) - && KEY_NOT_YET_RELEASED(COMBO_STATE(combo), key_index) - ) { + } else if (COMBO_ACTIVE(combo) && KEY_NOT_YET_RELEASED(COMBO_STATE(combo), key_index)) { /* first or middle key released */ key_is_part_of_combo = true; @@ -489,21 +495,21 @@ bool process_combo(uint16_t keycode, keyrecord_t *record) { if (record->event.pressed && is_combo_key) { #ifndef COMBO_NO_TIMER -# ifdef COMBO_STRICT_TIMER +# ifdef COMBO_STRICT_TIMER if (!timer) { // timer is set only on the first key timer = timer_read(); } -# else +# else timer = timer_read(); -# endif +# endif #endif if (key_buffer_size < COMBO_KEY_BUFFER_LENGTH) { key_buffer[key_buffer_size++] = (queued_record_t){ - .record = *record, - .keycode = keycode, - .combo_index = -1, // this will be set when applying combos + .record = *record, + .keycode = keycode, + .combo_index = -1, // this will be set when applying combos }; } } else { @@ -532,7 +538,7 @@ void combo_task(void) { if (combo_buffer_read != combo_buffer_write) { apply_combos(); longest_term = 0; - timer = 0; + timer = 0; } else { dump_key_buffer(); timer = 0; @@ -546,9 +552,9 @@ void combo_enable(void) { b_combo_enable = true; } void combo_disable(void) { #ifndef COMBO_NO_TIMER - timer = 0; + timer = 0; #endif - b_combo_enable = false; + b_combo_enable = false; combo_buffer_read = combo_buffer_write; clear_combos(); dump_key_buffer(); diff --git a/quantum/process_keycode/process_combo.h b/quantum/process_keycode/process_combo.h index 43c36d79e6..4c4e574e34 100644 --- a/quantum/process_keycode/process_combo.h +++ b/quantum/process_keycode/process_combo.h @@ -43,8 +43,8 @@ typedef struct { #ifdef EXTRA_SHORT_COMBOS uint8_t state; #else - bool disabled; - bool active; + bool disabled; + bool active; # if defined(EXTRA_EXTRA_LONG_COMBOS) uint32_t state; # elif defined(EXTRA_LONG_COMBOS) diff --git a/quantum/process_keycode/process_steno.c b/quantum/process_keycode/process_steno.c index a964aead35..5d0bb313b4 100644 --- a/quantum/process_keycode/process_steno.c +++ b/quantum/process_keycode/process_steno.c @@ -67,7 +67,7 @@ static const uint8_t boltmap[64] PROGMEM = {TXB_NUL, TXB_NUM, TXB_NUM, TXB_NUM, #ifdef STENO_COMBINEDMAP /* Used to look up when pressing the middle row key to combine two consonant or vowel keys */ -static const uint16_t combinedmap_first[] PROGMEM = {STN_S1, STN_TL, STN_PL, STN_HL, STN_FR, STN_PR, STN_LR, STN_TR, STN_DR, STN_A, STN_E}; +static const uint16_t combinedmap_first[] PROGMEM = {STN_S1, STN_TL, STN_PL, STN_HL, STN_FR, STN_PR, STN_LR, STN_TR, STN_DR, STN_A, STN_E}; static const uint16_t combinedmap_second[] PROGMEM = {STN_S2, STN_KL, STN_WL, STN_RL, STN_RR, STN_BR, STN_GR, STN_SR, STN_ZR, STN_O, STN_U}; #endif @@ -174,11 +174,10 @@ bool process_steno(uint16_t keycode, keyrecord_t *record) { return false; #ifdef STENO_COMBINEDMAP - case QK_STENO_COMB ... QK_STENO_COMB_MAX: - { + case QK_STENO_COMB ... QK_STENO_COMB_MAX: { uint8_t result; - result = process_steno(combinedmap_first[keycode-QK_STENO_COMB], record); - result &= process_steno(combinedmap_second[keycode-QK_STENO_COMB], record); + result = process_steno(combinedmap_first[keycode - QK_STENO_COMB], record); + result &= process_steno(combinedmap_second[keycode - QK_STENO_COMB], record); return result; } #endif diff --git a/quantum/quantum.c b/quantum/quantum.c index e60378afe4..0ae12b5834 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -145,12 +145,13 @@ void reset_keyboard(void) { /* Convert record into usable keycode via the contained event. */ uint16_t get_record_keycode(keyrecord_t *record, bool update_layer_cache) { #ifdef COMBO_ENABLE - if (record->keycode) { return record->keycode; } + if (record->keycode) { + return record->keycode; + } #endif return get_event_keycode(record->event, update_layer_cache); } - /* Convert event into usable keycode. Checks the layer cache to ensure that it * retains the correct keycode after a layer change, if the key is still pressed. * "update_layer_cache" is to ensure that it only updates the layer cache when @@ -179,12 +180,12 @@ uint16_t get_event_keycode(keyevent_t event, bool update_layer_cache) { bool pre_process_record_quantum(keyrecord_t *record) { if (!( #ifdef COMBO_ENABLE - process_combo(get_record_keycode(record, true), record) && + process_combo(get_record_keycode(record, true), record) && #endif - true)) { + true)) { return false; } - return true; // continue processing + return true; // continue processing } /* Get keycode, and then call keyboard function */ diff --git a/quantum/quantum_keycodes.h b/quantum/quantum_keycodes.h index ef4b0f457b..99eade0e03 100644 --- a/quantum/quantum_keycodes.h +++ b/quantum/quantum_keycodes.h @@ -775,12 +775,12 @@ enum quantum_keycodes { #define CMD_T(kc) LCMD_T(kc) #define WIN_T(kc) LWIN_T(kc) -#define C_S_T(kc) MT(MOD_LCTL | MOD_LSFT, kc) // Left Control + Shift e.g. for gnome-terminal -#define MEH_T(kc) MT(MOD_LCTL | MOD_LSFT | MOD_LALT, kc) // Meh is a less hyper version of the Hyper key -- doesn't include GUI, so just Left Control + Shift + Alt -#define LCAG_T(kc) MT(MOD_LCTL | MOD_LALT | MOD_LGUI, kc) // Left Control + Alt + GUI -#define RCAG_T(kc) MT(MOD_RCTL | MOD_RALT | MOD_RGUI, kc) // Right Control + Alt + GUI +#define C_S_T(kc) MT(MOD_LCTL | MOD_LSFT, kc) // Left Control + Shift e.g. for gnome-terminal +#define MEH_T(kc) MT(MOD_LCTL | MOD_LSFT | MOD_LALT, kc) // Meh is a less hyper version of the Hyper key -- doesn't include GUI, so just Left Control + Shift + Alt +#define LCAG_T(kc) MT(MOD_LCTL | MOD_LALT | MOD_LGUI, kc) // Left Control + Alt + GUI +#define RCAG_T(kc) MT(MOD_RCTL | MOD_RALT | MOD_RGUI, kc) // Right Control + Alt + GUI #define HYPR_T(kc) MT(MOD_LCTL | MOD_LSFT | MOD_LALT | MOD_LGUI, kc) // see http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/ -#define LSG_T(kc) MT(MOD_LSFT | MOD_LGUI, kc) // Left Shift + GUI +#define LSG_T(kc) MT(MOD_LSFT | MOD_LGUI, kc) // Left Shift + GUI #define SGUI_T(kc) LSG_T(kc) #define SCMD_T(kc) LSG_T(kc) #define SWIN_T(kc) LSG_T(kc) @@ -811,7 +811,7 @@ enum quantum_keycodes { #define UC_M_MA UNICODE_MODE_MAC #define UNICODE_MODE_OSX UNICODE_MODE_MAC // Deprecated alias -#define UC_M_OS UNICODE_MODE_MAC // Deprecated alias +#define UC_M_OS UNICODE_MODE_MAC // Deprecated alias #define UC_M_LN UNICODE_MODE_LNX #define UC_M_WI UNICODE_MODE_WIN #define UC_M_BS UNICODE_MODE_BSD diff --git a/quantum/split_common/transactions.c b/quantum/split_common/transactions.c index fd676f0729..3ff87710e7 100644 --- a/quantum/split_common/transactions.c +++ b/quantum/split_common/transactions.c @@ -42,8 +42,8 @@ { &dummy, 0, 0, sizeof_member(split_shared_memory_t, member), offsetof(split_shared_memory_t, member), cb } #define trans_target2initiator_initializer(member) trans_target2initiator_initializer_cb(member, NULL) -#define transport_write(id, data, length) transport_execute_transaction(id, data, length, NULL, 0) -#define transport_read(id, data, length) transport_execute_transaction(id, NULL, 0, data, length) +#define transport_write(id, data, length) transport_execute_transaction(id, data, length, NULL, 0) +#define transport_read(id, data, length) transport_execute_transaction(id, NULL, 0, data, length) #if defined(SPLIT_TRANSACTION_IDS_KB) || defined(SPLIT_TRANSACTION_IDS_USER) // Forward-declare the RPC callback handlers @@ -157,8 +157,8 @@ static void master_matrix_handlers_slave(matrix_row_t master_matrix[], matrix_ro memcpy(master_matrix, split_shmem->mmatrix.matrix, sizeof(split_shmem->mmatrix.matrix)); } -# define TRANSACTIONS_MASTER_MATRIX_MASTER() TRANSACTION_HANDLER_MASTER(master_matrix) -# define TRANSACTIONS_MASTER_MATRIX_SLAVE() TRANSACTION_HANDLER_SLAVE(master_matrix) +# define TRANSACTIONS_MASTER_MATRIX_MASTER() TRANSACTION_HANDLER_MASTER(master_matrix) +# define TRANSACTIONS_MASTER_MATRIX_SLAVE() TRANSACTION_HANDLER_SLAVE(master_matrix) # define TRANSACTIONS_MASTER_MATRIX_REGISTRATIONS [PUT_MASTER_MATRIX] = trans_initiator2target_initializer(mmatrix.matrix), #else // SPLIT_TRANSPORT_MIRROR @@ -235,8 +235,8 @@ static void sync_timer_handlers_slave(matrix_row_t master_matrix[], matrix_row_t } } -# define TRANSACTIONS_SYNC_TIMER_MASTER() TRANSACTION_HANDLER_MASTER(sync_timer) -# define TRANSACTIONS_SYNC_TIMER_SLAVE() TRANSACTION_HANDLER_SLAVE(sync_timer) +# define TRANSACTIONS_SYNC_TIMER_MASTER() TRANSACTION_HANDLER_MASTER(sync_timer) +# define TRANSACTIONS_SYNC_TIMER_SLAVE() TRANSACTION_HANDLER_SLAVE(sync_timer) # define TRANSACTIONS_SYNC_TIMER_REGISTRATIONS [PUT_SYNC_TIMER] = trans_initiator2target_initializer(sync_timer), #else // DISABLE_SYNC_TIMER @@ -300,8 +300,8 @@ static void led_state_handlers_slave(matrix_row_t master_matrix[], matrix_row_t set_split_host_keyboard_leds(split_shmem->led_state); } -# define TRANSACTIONS_LED_STATE_MASTER() TRANSACTION_HANDLER_MASTER(led_state) -# define TRANSACTIONS_LED_STATE_SLAVE() TRANSACTION_HANDLER_SLAVE(led_state) +# define TRANSACTIONS_LED_STATE_MASTER() TRANSACTION_HANDLER_MASTER(led_state) +# define TRANSACTIONS_LED_STATE_SLAVE() TRANSACTION_HANDLER_SLAVE(led_state) # define TRANSACTIONS_LED_STATE_REGISTRATIONS [PUT_LED_STATE] = trans_initiator2target_initializer(led_state), #else // SPLIT_LED_STATE_ENABLE @@ -357,8 +357,8 @@ static void mods_handlers_slave(matrix_row_t master_matrix[], matrix_row_t slave # endif } -# define TRANSACTIONS_MODS_MASTER() TRANSACTION_HANDLER_MASTER(mods) -# define TRANSACTIONS_MODS_SLAVE() TRANSACTION_HANDLER_SLAVE(mods) +# define TRANSACTIONS_MODS_MASTER() TRANSACTION_HANDLER_MASTER(mods) +# define TRANSACTIONS_MODS_SLAVE() TRANSACTION_HANDLER_SLAVE(mods) # define TRANSACTIONS_MODS_REGISTRATIONS [PUT_MODS] = trans_initiator2target_initializer(mods), #else // SPLIT_MODS_ENABLE @@ -382,8 +382,8 @@ static bool backlight_handlers_master(matrix_row_t master_matrix[], matrix_row_t static void backlight_handlers_slave(matrix_row_t master_matrix[], matrix_row_t slave_matrix[]) { backlight_set(split_shmem->backlight_level); } -# define TRANSACTIONS_BACKLIGHT_MASTER() TRANSACTION_HANDLER_MASTER(backlight) -# define TRANSACTIONS_BACKLIGHT_SLAVE() TRANSACTION_HANDLER_SLAVE(backlight) +# define TRANSACTIONS_BACKLIGHT_MASTER() TRANSACTION_HANDLER_MASTER(backlight) +# define TRANSACTIONS_BACKLIGHT_SLAVE() TRANSACTION_HANDLER_SLAVE(backlight) # define TRANSACTIONS_BACKLIGHT_REGISTRATIONS [PUT_BACKLIGHT] = trans_initiator2target_initializer(backlight_level), #else // BACKLIGHT_ENABLE @@ -419,8 +419,8 @@ static void rgblight_handlers_slave(matrix_row_t master_matrix[], matrix_row_t s } } -# define TRANSACTIONS_RGBLIGHT_MASTER() TRANSACTION_HANDLER_MASTER(rgblight) -# define TRANSACTIONS_RGBLIGHT_SLAVE() TRANSACTION_HANDLER_SLAVE(rgblight) +# define TRANSACTIONS_RGBLIGHT_MASTER() TRANSACTION_HANDLER_MASTER(rgblight) +# define TRANSACTIONS_RGBLIGHT_SLAVE() TRANSACTION_HANDLER_SLAVE(rgblight) # define TRANSACTIONS_RGBLIGHT_REGISTRATIONS [PUT_RGBLIGHT] = trans_initiator2target_initializer(rgblight_sync), #else // defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT) @@ -449,8 +449,8 @@ static void led_matrix_handlers_slave(matrix_row_t master_matrix[], matrix_row_t led_matrix_set_suspend_state(split_shmem->led_matrix_sync.led_suspend_state); } -# define TRANSACTIONS_LED_MATRIX_MASTER() TRANSACTION_HANDLER_MASTER(led_matrix) -# define TRANSACTIONS_LED_MATRIX_SLAVE() TRANSACTION_HANDLER_SLAVE(led_matrix) +# define TRANSACTIONS_LED_MATRIX_MASTER() TRANSACTION_HANDLER_MASTER(led_matrix) +# define TRANSACTIONS_LED_MATRIX_SLAVE() TRANSACTION_HANDLER_SLAVE(led_matrix) # define TRANSACTIONS_LED_MATRIX_REGISTRATIONS [PUT_LED_MATRIX] = trans_initiator2target_initializer(led_matrix_sync), #else // defined(LED_MATRIX_ENABLE) && defined(LED_MATRIX_SPLIT) @@ -479,8 +479,8 @@ static void rgb_matrix_handlers_slave(matrix_row_t master_matrix[], matrix_row_t rgb_matrix_set_suspend_state(split_shmem->rgb_matrix_sync.rgb_suspend_state); } -# define TRANSACTIONS_RGB_MATRIX_MASTER() TRANSACTION_HANDLER_MASTER(rgb_matrix) -# define TRANSACTIONS_RGB_MATRIX_SLAVE() TRANSACTION_HANDLER_SLAVE(rgb_matrix) +# define TRANSACTIONS_RGB_MATRIX_MASTER() TRANSACTION_HANDLER_MASTER(rgb_matrix) +# define TRANSACTIONS_RGB_MATRIX_SLAVE() TRANSACTION_HANDLER_SLAVE(rgb_matrix) # define TRANSACTIONS_RGB_MATRIX_REGISTRATIONS [PUT_RGB_MATRIX] = trans_initiator2target_initializer(rgb_matrix_sync), #else // defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_SPLIT) @@ -504,8 +504,8 @@ static bool wpm_handlers_master(matrix_row_t master_matrix[], matrix_row_t slave static void wpm_handlers_slave(matrix_row_t master_matrix[], matrix_row_t slave_matrix[]) { set_current_wpm(split_shmem->current_wpm); } -# define TRANSACTIONS_WPM_MASTER() TRANSACTION_HANDLER_MASTER(wpm) -# define TRANSACTIONS_WPM_SLAVE() TRANSACTION_HANDLER_SLAVE(wpm) +# define TRANSACTIONS_WPM_MASTER() TRANSACTION_HANDLER_MASTER(wpm) +# define TRANSACTIONS_WPM_SLAVE() TRANSACTION_HANDLER_SLAVE(wpm) # define TRANSACTIONS_WPM_REGISTRATIONS [PUT_WPM] = trans_initiator2target_initializer(current_wpm), #else // defined(WPM_ENABLE) && defined(SPLIT_WPM_ENABLE) @@ -535,8 +535,8 @@ static void oled_handlers_slave(matrix_row_t master_matrix[], matrix_row_t slave } } -# define TRANSACTIONS_OLED_MASTER() TRANSACTION_HANDLER_MASTER(oled) -# define TRANSACTIONS_OLED_SLAVE() TRANSACTION_HANDLER_SLAVE(oled) +# define TRANSACTIONS_OLED_MASTER() TRANSACTION_HANDLER_MASTER(oled) +# define TRANSACTIONS_OLED_SLAVE() TRANSACTION_HANDLER_SLAVE(oled) # define TRANSACTIONS_OLED_REGISTRATIONS [PUT_OLED] = trans_initiator2target_initializer(current_oled_state), #else // defined(OLED_ENABLE) && defined(SPLIT_OLED_ENABLE) @@ -566,8 +566,8 @@ static void st7565_handlers_slave(matrix_row_t master_matrix[], matrix_row_t sla } } -# define TRANSACTIONS_ST7565_MASTER() TRANSACTION_HANDLER_MASTER(st7565) -# define TRANSACTIONS_ST7565_SLAVE() TRANSACTION_HANDLER_SLAVE(st7565) +# define TRANSACTIONS_ST7565_MASTER() TRANSACTION_HANDLER_MASTER(st7565) +# define TRANSACTIONS_ST7565_SLAVE() TRANSACTION_HANDLER_SLAVE(st7565) # define TRANSACTIONS_ST7565_REGISTRATIONS [PUT_ST7565] = trans_initiator2target_initializer(current_st7565_state), #else // defined(ST7565_ENABLE) && defined(SPLIT_ST7565_ENABLE) diff --git a/tmk_core/common/chibios/sleep_led.c b/tmk_core/common/chibios/sleep_led.c index 1c65016a42..477056a454 100644 --- a/tmk_core/common/chibios/sleep_led.c +++ b/tmk_core/common/chibios/sleep_led.c @@ -65,7 +65,7 @@ void sleep_led_timer_callback(void) { /* LPTMR clock options */ # define LPTMR_CLOCK_MCGIRCLK 0 /* 4MHz clock */ -# define LPTMR_CLOCK_LPO 1 /* 1kHz clock */ +# define LPTMR_CLOCK_LPO 1 /* 1kHz clock */ # define LPTMR_CLOCK_ERCLK32K 2 /* external 32kHz crystal */ # define LPTMR_CLOCK_OSCERCLK 3 /* output from OSC */ @@ -121,7 +121,7 @@ void sleep_led_init(void) { MCG->C2 |= MCG_C2_IRCS; // fast (4MHz) internal ref clock # if defined(KL27) // divide the 8MHz IRC by 2, to have the same MCGIRCLK speed as others MCG->MC |= MCG_MC_LIRC_DIV2_DIV2; -# endif /* KL27 */ +# endif /* KL27 */ MCG->C1 |= MCG_C1_IRCLKEN; // enable internal ref clock // to work in stop mode, also MCG_C1_IREFSTEN // Divide 4MHz by 2^N (N=6) => 62500 irqs/sec => diff --git a/tmk_core/common/report.c b/tmk_core/common/report.c index 2a7fc006c4..854b59ae48 100644 --- a/tmk_core/common/report.c +++ b/tmk_core/common/report.c @@ -24,8 +24,8 @@ #ifdef RING_BUFFERED_6KRO_REPORT_ENABLE # define RO_ADD(a, b) ((a + b) % KEYBOARD_REPORT_KEYS) # define RO_SUB(a, b) ((a - b + KEYBOARD_REPORT_KEYS) % KEYBOARD_REPORT_KEYS) -# define RO_INC(a) RO_ADD(a, 1) -# define RO_DEC(a) RO_SUB(a, 1) +# define RO_INC(a) RO_ADD(a, 1) +# define RO_DEC(a) RO_SUB(a, 1) static int8_t cb_head = 0; static int8_t cb_tail = 0; static int8_t cb_count = 0; diff --git a/tmk_core/protocol/ps2_mouse.c b/tmk_core/protocol/ps2_mouse.c index 39251a6434..43c88084d2 100644 --- a/tmk_core/protocol/ps2_mouse.c +++ b/tmk_core/protocol/ps2_mouse.c @@ -158,8 +158,8 @@ static inline void ps2_mouse_convert_report_to_hid(report_mouse_t *mouse_report) #ifdef PS2_MOUSE_INVERT_BUTTONS // swap left & right buttons - uint8_t needs_left = mouse_report->buttons & PS2_MOUSE_BTN_RIGHT; - uint8_t needs_right = mouse_report->buttons & PS2_MOUSE_BTN_LEFT; + uint8_t needs_left = mouse_report->buttons & PS2_MOUSE_BTN_RIGHT; + uint8_t needs_right = mouse_report->buttons & PS2_MOUSE_BTN_LEFT; mouse_report->buttons = (mouse_report->buttons & ~(PS2_MOUSE_BTN_MASK)) | (needs_left ? PS2_MOUSE_BTN_LEFT : 0) | (needs_right ? PS2_MOUSE_BTN_RIGHT : 0); #else // remove sign and overflow flags From 25b087925c8ea88816c4049b7bcbd9dd850f2cef Mon Sep 17 00:00:00 2001 From: QMK Bot Date: Wed, 17 Nov 2021 12:42:00 -0800 Subject: [PATCH 509/595] Format code according to conventions (#15195) --- quantum/process_keycode/process_auto_shift.c | 10 +++++----- .../rgb_matrix/animations/pixel_rain_anim.h | 18 +++++++++++------- 2 files changed, 16 insertions(+), 12 deletions(-) diff --git a/quantum/process_keycode/process_auto_shift.c b/quantum/process_keycode/process_auto_shift.c index 02af5174f7..4d928edb57 100644 --- a/quantum/process_keycode/process_auto_shift.c +++ b/quantum/process_keycode/process_auto_shift.c @@ -21,11 +21,11 @@ # include "process_auto_shift.h" -#ifndef AUTO_SHIFT_DISABLED_AT_STARTUP -# define AUTO_SHIFT_STARTUP_STATE true /* enabled */ -#else -# define AUTO_SHIFT_STARTUP_STATE false /* disabled */ -#endif +# ifndef AUTO_SHIFT_DISABLED_AT_STARTUP +# define AUTO_SHIFT_STARTUP_STATE true /* enabled */ +# else +# define AUTO_SHIFT_STARTUP_STATE false /* disabled */ +# endif static uint16_t autoshift_time = 0; static uint16_t autoshift_timeout = AUTO_SHIFT_TIMEOUT; diff --git a/quantum/rgb_matrix/animations/pixel_rain_anim.h b/quantum/rgb_matrix/animations/pixel_rain_anim.h index 0209d33033..001649aa6e 100644 --- a/quantum/rgb_matrix/animations/pixel_rain_anim.h +++ b/quantum/rgb_matrix/animations/pixel_rain_anim.h @@ -16,18 +16,22 @@ #ifdef ENABLE_RGB_MATRIX_PIXEL_RAIN RGB_MATRIX_EFFECT(PIXEL_RAIN) -# ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS +# ifdef RGB_MATRIX_CUSTOM_EFFECT_IMPLS static bool PIXEL_RAIN(effect_params_t* params) { static uint32_t wait_timer = 0; - if (wait_timer > g_rgb_timer) { return false; } + if (wait_timer > g_rgb_timer) { + return false; + } inline uint32_t interval(void) { return 500 / scale16by8(qadd8(rgb_matrix_config.speed, 16), 16); } - bool rain_pixel(uint8_t i, effect_params_t* params, bool off) { - if (!HAS_ANY_FLAGS(g_led_config.flags[i], params->flags)) { return true; } + bool rain_pixel(uint8_t i, effect_params_t * params, bool off) { + if (!HAS_ANY_FLAGS(g_led_config.flags[i], params->flags)) { + return true; + } if (off) { - rgb_matrix_set_color(i, 0,0,0); + rgb_matrix_set_color(i, 0, 0, 0); } else { HSV hsv = {random8(), qadd8(random8() >> 1, 127), rgb_matrix_config.hsv.v}; RGB rgb = rgb_matrix_hsv_to_rgb(hsv); @@ -40,5 +44,5 @@ static bool PIXEL_RAIN(effect_params_t* params) { return rain_pixel(mod8(random8(), DRIVER_LED_TOTAL), params, random8() & 2); } -# endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS -#endif // ENABLE_RGB_MATRIX_PIXEL_RAIN +# endif // RGB_MATRIX_CUSTOM_EFFECT_IMPLS +#endif // ENABLE_RGB_MATRIX_PIXEL_RAIN From 254e26554b27aafc1d9676cec63263ede738bf57 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Wed, 17 Nov 2021 12:45:50 -0800 Subject: [PATCH 510/595] [Keymap] updates for oled, and diablo 2 layer - Drashna (#15194) --- .../tractyl_manuform/5x6_right/f411/config.h | 4 ++++ .../5x6_right/keymaps/drashna/config.h | 3 +-- .../5x6_right/keymaps/drashna/keymap.c | 12 +++++++++- keyboards/moonlander/keymaps/drashna/keymap.c | 10 ++++++++- .../work_board/keymaps/drashna/keymap.c | 2 +- users/drashna/config.h | 22 ++++++++++++++++--- users/drashna/drashna.h | 1 + users/drashna/oled_stuff.c | 8 +++---- users/drashna/process_records.c | 2 +- 9 files changed, 51 insertions(+), 13 deletions(-) diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h index 4dbe03acbf..986ccae69b 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h +++ b/keyboards/handwired/tractyl_manuform/5x6_right/f411/config.h @@ -102,6 +102,10 @@ along with this program. If not, see . // #define EXTERNAL_EEPROM_ADDRESS_SIZE 2 // #define DEBUG_EEPROM_OUTPUT +#ifdef EEPROM_SPI +# define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 8195 +#endif + /* pmw3360 config */ #define PMW3360_CS_PIN B0 #define PMW3360_SPI_MODE 3 diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/config.h b/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/config.h index a984ba4885..577b709bb5 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/config.h +++ b/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/config.h @@ -18,5 +18,4 @@ #define TRACKBALL_DPI_OPTIONS { 1200, 1800, 2600, 3400 } -#undef DEBOUNCE -#define DEBOUNCE 15 +#define DEBOUNCE 45 diff --git a/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c b/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c index 5bfc21fd14..a52a2a3dc6 100644 --- a/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c +++ b/keyboards/handwired/tractyl_manuform/5x6_right/keymaps/drashna/keymap.c @@ -94,6 +94,16 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { SFT_T(KC_SPC), KC_J, _______, ALT_T(KC_Q), KC_LGUI, _______, _______ ), + [_DIABLOII] = LAYOUT_5x6_right( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_GRV, _______, _______, _______, _______, _______, _______, + KC_TAB, KC_A, KC_T, KC_Q, KC_I, KC_M, _______, _______, _______, _______, _______, _______, + KC_S, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, _______, _______, _______, _______, _______, _______, + KC_LCTL, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, _______, _______, _______, _______, _______, _______, + KC_F, KC_L, KC_NO, TG(_DIABLOII), + _______, KC_G, _______, + KC_LSFT, _______, _______, + KC_LCTL, KC_V, _______, _______ + ), [_LOWER] = LAYOUT_5x6_right_wrapper( KC_F12, _________________FUNC_LEFT_________________, _________________FUNC_RIGHT________________, KC_F11, _______, _________________LOWER_L1__________________, _________________LOWER_R1__________________, _______, @@ -122,7 +132,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { HPT_DWLI, HPT_DWLD, TG_GAME, TG_DBLO, HPT_TOG, HPT_BUZ, KC_NUKE, _______, _______, _______, - _______, _______, KC_NUKE, _______ + _______, TG(_DIABLOII),KC_NUKE, _______ ), }; diff --git a/keyboards/moonlander/keymaps/drashna/keymap.c b/keyboards/moonlander/keymaps/drashna/keymap.c index 257959c07f..2d90a3172b 100644 --- a/keyboards/moonlander/keymaps/drashna/keymap.c +++ b/keyboards/moonlander/keymaps/drashna/keymap.c @@ -82,6 +82,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_NO, KC_NO, KC_L, KC_J, KC_F, KC_PSCR, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_DIABLO_CLEAR, SFT_T(KC_SPACE), ALT_T(KC_Q), KC_PGDN, KC_DEL, KC_ENT ), + [_DIABLOII] = LAYOUT_moonlander_wrapper( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_GRV, KC_NO, KC_TRNS, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, KC_NO, + KC_TAB, KC_A, KC_T, KC_Q, KC_I, KC_M, TG(_DIABLOII), KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_S, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_NO, KC_TRNS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_LCTL, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_N, KC_M, KC_NO, KC_NO, KC_NO, KC_NO, + KC_NO, KC_NO, KC_G, KC_F, KC_L, KC_V, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_G, KC_LSFT, KC_LCTL, KC_PGDN, KC_DEL, KC_ENT + ), [_LOWER] = LAYOUT_moonlander_wrapper( KC_F12, _________________FUNC_LEFT_________________, _______, _______, _________________FUNC_RIGHT________________, KC_F11, @@ -103,7 +111,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_ADJUST] = LAYOUT_moonlander_wrapper( KC_MAKE, _________________FUNC_LEFT_________________, UC_MOD, KC_NUKE, _________________ADJUST_R1_________________, KC_RST, - VRSN, _________________ADJUST_L1_________________, _______, _______, _________________ADJUST_R1_________________, EEP_RST, + VRSN, _________________ADJUST_L1_________________, TG(_DIABLOII), _______, _________________ADJUST_R1_________________, EEP_RST, _______, _________________ADJUST_L2_________________, _______, _______, _________________ADJUST_R2_________________, RGB_IDL, KEYLOCK, _________________ADJUST_L3_________________, _________________ADJUST_R3_________________, TG_MODS, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PAUS, diff --git a/keyboards/work_louder/work_board/keymaps/drashna/keymap.c b/keyboards/work_louder/work_board/keymaps/drashna/keymap.c index fb86275da9..3bbb81bf04 100644 --- a/keyboards/work_louder/work_board/keymaps/drashna/keymap.c +++ b/keyboards/work_louder/work_board/keymaps/drashna/keymap.c @@ -117,7 +117,7 @@ bool encoder_update_user(uint8_t index, bool clockwise) { clockwise ? rgb_matrix_step() : rgb_matrix_step_reverse(); break; default: - clockwise ? tap_code(KC_VOLD) : tap_code(KC_VOLU); + clockwise ? tap_code(KC_VOLU) : tap_code(KC_VOLD); break; } return false; diff --git a/users/drashna/config.h b/users/drashna/config.h index f54da9e328..a7c99ed0d6 100644 --- a/users/drashna/config.h +++ b/users/drashna/config.h @@ -148,16 +148,32 @@ // # define OLED_FONT_AZTECH // # define OLED_FONT_BMPLAIN // # define OLED_FONT_CRACKERS -// # define OLED_FONT_HISKYF21 # define OLED_FONT_DEAD_MEAL +// # define OLED_FONT_EIN +// # define OLED_FONT_HISKYF21 +// # define OLED_FONT_SQUASH +// # define OLED_FONT_ZXPIX // # define OLED_FONT_SUPER_DIGG -// # define OLED_LOGO_GMK_BAD -// # define OLED_LOGO_HUE_MANITEE + +// # define OLED_LOGO_BEBOP // # define OLED_LOGO_CORNE +// # define OLED_LOGO_GMK_BAD // # define OLED_LOGO_GOTHAM +// # define OLED_LOGO_HUE_MANITEE +// # define OLED_LOGO_LOOSE # define OLED_LOGO_SCIFI +// # define OLED_LOGO_SETS3N +// # define OLED_LOGO_SKEEB #endif +// #define WPM_ESTIMATED_WORD_SIZE 5 +#define WPM_ALLOW_COUNT_REGRESSION +// #define WPM_UNFILTERED +// #define WPM_SAMPLE_SECONDS 5 +// #define WPM_SAMPLE_PERIODS 50 +// #define WPM_LAUNCH_CONTROL + + #ifndef ONESHOT_TAP_TOGGLE # define ONESHOT_TAP_TOGGLE 2 #endif // !ONESHOT_TAP_TOGGLE diff --git a/users/drashna/drashna.h b/users/drashna/drashna.h index af26fdc433..6a45141d9a 100644 --- a/users/drashna/drashna.h +++ b/users/drashna/drashna.h @@ -50,6 +50,7 @@ enum userspace_layers { LAST_DEFAULT_LAYER = _DVORAK, _GAMEPAD, _DIABLO, + _DIABLOII, _MOUSE, _MEDIA, _LOWER, diff --git a/users/drashna/oled_stuff.c b/users/drashna/oled_stuff.c index 4b54919507..6413f5e1c7 100644 --- a/users/drashna/oled_stuff.c +++ b/users/drashna/oled_stuff.c @@ -36,8 +36,8 @@ static const char PROGMEM code_to_name[256] = { ' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f', 'g', 'h', 'i', 'j', 'k', 'l', // 0x 'm', 'n', 'o', 'p', 'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z', '1', '2', // 1x '3', '4', '5', '6', '7', '8', '9', '0', 20, 19, 27, 26, 22, '-', '=', '[', // 2x - ']','\\', '#', ';','\'', '`', ',', '.', '/', 128, '1', '2', '3', '4', '5', '6', // 3x - '7', '8', '9', '0', '1', '2', 'P', 'S', 19, ' ', 17, 30, 16, 16, 31, 26, // 4x + ']','\\', '#', ';','\'', '`', ',', '.', '/', 128,0xD5,0xD6,0xD7,0xD8,0xD9,0xDA, // 3x + 0xDB,0xDC,0xDD,0xDE,0XDF,0xFB,'P', 'S', 19, ' ', 17, 30, 16, 16, 31, 26, // 4x 27, 25, 24, 'N', '/', '*', '-', '+', 23, '1', '2', '3', '4', '5', '6', '7', // 5x '8', '9', '0', '.','\\', 'A', 0, '=', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // 6x ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // 7x @@ -47,8 +47,8 @@ static const char PROGMEM code_to_name[256] = { ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // Bx ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // Cx ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', // Dx - 'C', 'S', 'A', 'C', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', 24, 26, 24, // Ex - 25,0x9D,0x9D,0x9D,0x9D,0x9D,0x9D,0x9D,0x9D, 24, 25, 27, 26, ' ', ' ', ' ' // Fx + 'C', 'S', 'A', 'C', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', ' ', 24, 26, 24, // Ex + 25,0x9D,0x9D,0x9D,0x9D,0x9D,0x9D,0x9D,0x9D, 24, 25, 27, 26, ' ', ' ', ' ' // Fx }; // clang-format on diff --git a/users/drashna/process_records.c b/users/drashna/process_records.c index 1e7f7ca762..c16c70c050 100644 --- a/users/drashna/process_records.c +++ b/users/drashna/process_records.c @@ -199,6 +199,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *re } } break; +#endif case KEYLOCK: { static host_driver_t *host_driver = 0; @@ -215,7 +216,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *re } break; } -#endif } return true; } From 10e896630ce9283b42b8cdbf44ccb81538dc9851 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Wed, 17 Nov 2021 12:54:12 -0800 Subject: [PATCH 511/595] [Keyboard] Move encoder hacks into via keymaps for Work Louder boards (#15192) --- .../work_louder/loop/keymaps/via/keymap.c | 8 ++++++ .../work_louder/loop/keymaps/via/rules.mk | 2 ++ keyboards/work_louder/loop/loop.h | 8 ------ keyboards/work_louder/loop/rules.mk | 4 ++- .../work_louder/nano/keymaps/via/keymap.c | 7 +++++ .../work_louder/nano/keymaps/via/rules.mk | 2 ++ keyboards/work_louder/nano/nano.h | 7 ----- keyboards/work_louder/nano/rules.mk | 4 ++- .../work_board/keymaps/via/keymap.c | 13 ++++++++++ .../work_board/keymaps/via/rules.mk | 2 ++ keyboards/work_louder/work_board/rules.mk | 2 +- keyboards/work_louder/work_board/work_board.h | 26 ------------------- 12 files changed, 41 insertions(+), 44 deletions(-) diff --git a/keyboards/work_louder/loop/keymaps/via/keymap.c b/keyboards/work_louder/loop/keymaps/via/keymap.c index c5769b9910..22113e836e 100644 --- a/keyboards/work_louder/loop/keymaps/via/keymap.c +++ b/keyboards/work_louder/loop/keymaps/via/keymap.c @@ -15,6 +15,14 @@ */ #include QMK_KEYBOARD_H +#define LAYOUT_via( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ + k00_a, k00_b, k01_a, k01_b, k02_a, k02_b \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \ + { k00_a, k00_b, k01_a, k01_b, k02_a, k02_b } \ +} + // clang-format off const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_via( diff --git a/keyboards/work_louder/loop/keymaps/via/rules.mk b/keyboards/work_louder/loop/keymaps/via/rules.mk index 36b7ba9cbc..6098ef3ad8 100644 --- a/keyboards/work_louder/loop/keymaps/via/rules.mk +++ b/keyboards/work_louder/loop/keymaps/via/rules.mk @@ -1,2 +1,4 @@ VIA_ENABLE = yes LTO_ENABLE = yes + +SRC += encoder_actions.c diff --git a/keyboards/work_louder/loop/loop.h b/keyboards/work_louder/loop/loop.h index acad9d7b3c..cfc58146d1 100644 --- a/keyboards/work_louder/loop/loop.h +++ b/keyboards/work_louder/loop/loop.h @@ -33,11 +33,3 @@ ) { \ { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b } \ } - -#define LAYOUT_via( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, \ - k00_a, k00_b, k01_a, k01_b, k02_a, k02_b \ -) { \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \ - { k00_a, k00_b, k01_a, k01_b, k02_a, k02_b } \ -} diff --git a/keyboards/work_louder/loop/rules.mk b/keyboards/work_louder/loop/rules.mk index 7e3f75e176..135291a7e2 100644 --- a/keyboards/work_louder/loop/rules.mk +++ b/keyboards/work_louder/loop/rules.mk @@ -20,7 +20,9 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes +LTO_ENABLE = yes + RGB_MATRIX_ENABLE = yes RGB_MATRIX_DRIVER = WS2812 -SRC += encoder_actions.c rgb_functions.c +SRC += rgb_functions.c diff --git a/keyboards/work_louder/nano/keymaps/via/keymap.c b/keyboards/work_louder/nano/keymaps/via/keymap.c index 84a54a4aac..7461172e07 100644 --- a/keyboards/work_louder/nano/keymaps/via/keymap.c +++ b/keyboards/work_louder/nano/keymaps/via/keymap.c @@ -16,6 +16,13 @@ #include QMK_KEYBOARD_H +#define LAYOUT_via( \ + k00, k01, k02, \ + k00_a, k00_b \ +) { \ + { k00, k01, k02, k00_a, k00_b } \ +} + const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Base */ diff --git a/keyboards/work_louder/nano/keymaps/via/rules.mk b/keyboards/work_louder/nano/keymaps/via/rules.mk index 36b7ba9cbc..6098ef3ad8 100644 --- a/keyboards/work_louder/nano/keymaps/via/rules.mk +++ b/keyboards/work_louder/nano/keymaps/via/rules.mk @@ -1,2 +1,4 @@ VIA_ENABLE = yes LTO_ENABLE = yes + +SRC += encoder_actions.c diff --git a/keyboards/work_louder/nano/nano.h b/keyboards/work_louder/nano/nano.h index 6f7463e6a4..6230d75ab7 100644 --- a/keyboards/work_louder/nano/nano.h +++ b/keyboards/work_louder/nano/nano.h @@ -33,10 +33,3 @@ ) { \ { k00, k01, k02 } \ } - -#define LAYOUT_via( \ - k00, k01, k02, \ - k00_a, k00_b \ -) { \ - { k00, k01, k02, k00_a, k00_b } \ -} diff --git a/keyboards/work_louder/nano/rules.mk b/keyboards/work_louder/nano/rules.mk index 843d80fe6a..a97f070422 100644 --- a/keyboards/work_louder/nano/rules.mk +++ b/keyboards/work_louder/nano/rules.mk @@ -20,7 +20,9 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes +LTO_ENABLE = yes + RGB_MATRIX_ENABLE = yes RGB_MATRIX_DRIVER = WS2812 -SRC += encoder_actions.c rgb_functions.c +SRC += rgb_functions.c diff --git a/keyboards/work_louder/work_board/keymaps/via/keymap.c b/keyboards/work_louder/work_board/keymaps/via/keymap.c index 70027697b4..5675adf2ed 100644 --- a/keyboards/work_louder/work_board/keymaps/via/keymap.c +++ b/keyboards/work_louder/work_board/keymaps/via/keymap.c @@ -30,6 +30,19 @@ enum tap_dances { #define LOWER FN_MO13 #define RAISE FN_MO23 +#define LAYOUT_via( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k0c_a, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k0c_b, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k0c_a }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k0c_b }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, ___ } \ +} + // clang-format off const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [_QWERTY] = LAYOUT_via( diff --git a/keyboards/work_louder/work_board/keymaps/via/rules.mk b/keyboards/work_louder/work_board/keymaps/via/rules.mk index 791d5ab502..7964f4279c 100644 --- a/keyboards/work_louder/work_board/keymaps/via/rules.mk +++ b/keyboards/work_louder/work_board/keymaps/via/rules.mk @@ -1,2 +1,4 @@ VIA_ENABLE = yes TAP_DANCE_ENABLE = yes + +SRC += encoder_actions.c diff --git a/keyboards/work_louder/work_board/rules.mk b/keyboards/work_louder/work_board/rules.mk index 7ecf7db5dd..a97f070422 100644 --- a/keyboards/work_louder/work_board/rules.mk +++ b/keyboards/work_louder/work_board/rules.mk @@ -25,4 +25,4 @@ LTO_ENABLE = yes RGB_MATRIX_ENABLE = yes RGB_MATRIX_DRIVER = WS2812 -SRC += encoder_actions.c rgb_functions.c +SRC += rgb_functions.c diff --git a/keyboards/work_louder/work_board/work_board.h b/keyboards/work_louder/work_board/work_board.h index 25a881a19c..f1bc74b704 100644 --- a/keyboards/work_louder/work_board/work_board.h +++ b/keyboards/work_louder/work_board/work_board.h @@ -55,29 +55,3 @@ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, ___ }, \ { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, ___ } \ } - -#define LAYOUT_2u_space_via( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k0c_a, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k0c_b, \ - k30, k31, k32, k33, k34, k35, k37, k38, k39, k3a, k3b \ -) \ -{ \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k0c_a }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k0c_b }, \ - { k30, k31, k32, k33, k34, k35, ___, k37, k38, k39, k3a, k3b, ___ } \ -} - -#define LAYOUT_via( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k0c_a, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k0c_b, \ - k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b \ -) \ -{ \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k0c_a }, \ - { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k0c_b }, \ - { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, ___ } \ -} From e0a5056963beddc3430dd3c8372858288dc85809 Mon Sep 17 00:00:00 2001 From: Mikkel Jeppesen <2756925+Duckle29@users.noreply.github.com> Date: Wed, 17 Nov 2021 21:56:13 +0100 Subject: [PATCH 512/595] Made AVR backlight pwm resolution configurable (#7521) * Made static backlight pwm resolution configurable * Made breathing backlighting configurable too * Finished my ifdef * Ran clang-format * Added missing semi-colon * Solved weird behaviour by right-shifting the right amount * Made breathing period scaled on actual pwm frequency * Made the low end deadzone scaled on the top value * Moved 'pwm_frequency' declaration outside ifdef * Fixed 'never used' error * Fixed 'never used' error * Fixed breathing ISR to 120Hz * Removed pwm_frequency constant Constant is no longer needed since running the breathing ISR at a fixed 120Hz * Re-add brightness limiting * re-introduce scaling --- quantum/backlight/backlight_avr.c | 109 +++++++++++++++++++----------- 1 file changed, 68 insertions(+), 41 deletions(-) diff --git a/quantum/backlight/backlight_avr.c b/quantum/backlight/backlight_avr.c index e47192de34..59050e2505 100644 --- a/quantum/backlight/backlight_avr.c +++ b/quantum/backlight/backlight_avr.c @@ -199,13 +199,14 @@ static inline void disable_pwm(void) { // reaches the backlight level, where we turn off the LEDs, // but also an overflow interrupt when the counter rolls back to 0, // in which we're going to turn on the LEDs. -// The LED will then be on for OCRxx/0xFFFF time, adjusted every 244Hz. +// The LED will then be on for OCRxx/0xFFFF time, adjusted every 244Hz, +// or F_CPU/BACKLIGHT_CUSTOM_RESOLUTION if used. // Triggered when the counter reaches the OCRx value ISR(TIMERx_COMPA_vect) { backlight_pins_off(); } // Triggered when the counter reaches the TOP value -// this one triggers at F_CPU/65536 =~ 244 Hz +// this one triggers at F_CPU/ICRx = 16MHz/65536 =~ 244 Hz ISR(TIMERx_OVF_vect) { # ifdef BACKLIGHT_BREATHING if (is_breathing()) { @@ -220,8 +221,8 @@ ISR(TIMERx_OVF_vect) { // artifacts (especially while breathing, because breathing_task // takes many computation cycles). // so better not turn them on while the counter TOP is very low. - if (OCRxx > 256) { - backlight_pins_on(); + if (OCRxx > ICRx / 250 + 5) { + FOR_EACH_LED(backlight_on(backlight_pin);) } } @@ -231,24 +232,26 @@ ISR(TIMERx_OVF_vect) { // See http://jared.geek.nz/2013/feb/linear-led-pwm static uint16_t cie_lightness(uint16_t v) { - if (v <= 5243) // if below 8% of max - return v / 9; // same as dividing by 900% - else { - uint32_t y = (((uint32_t)v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare - // to get a useful result with integer division, we shift left in the expression above - // and revert what we've done again after squaring. - y = y * y * y >> 8; - if (y > 0xFFFFUL) // prevent overflow - return 0xFFFFU; - else - return (uint16_t)y; + if (v <= ICRx / 12) // If the value is less than or equal to ~8% of max + { + return v / 9; // Same as dividing by 900% + } else { + // In the next two lines values are bit-shifted. This is to avoid loosing decimals in integer math. + uint32_t y = (((uint32_t)v + ICRx / 6) << 5) / (ICRx / 6 + ICRx); // If above 8%, add ~16% of max, and normalize with (max + ~16% max) + uint32_t out = (y * y * y * ICRx) >> 15; // Cube it and undo the bit-shifting. (which is now three times as much due to the cubing) + + if (out > ICRx) // Avoid overflows + { + out = ICRx; + } + return out; } } -// rescale the supplied backlight value to be in terms of the value limit +// rescale the supplied backlight value to be in terms of the value limit // range for val is [0..ICRx]. PWM pin is high while the timer count is below val. static uint32_t rescale_limit_val(uint32_t val) { return (val * (BACKLIGHT_LIMIT_VAL + 1)) / 256; } -// range for val is [0..TIMER_TOP]. PWM pin is high while the timer count is below val. +// range for val is [0..ICRx]. PWM pin is high while the timer count is below val. static inline void set_pwm(uint16_t val) { OCRxx = val; } void backlight_set(uint8_t level) { @@ -277,7 +280,7 @@ void backlight_set(uint8_t level) { #endif } // Set the brightness - set_pwm(cie_lightness(rescale_limit_val(TIMER_TOP * (uint32_t)level / BACKLIGHT_LEVELS))); + set_pwm(cie_lightness(rescale_limit_val(ICRx * (uint32_t)level / BACKLIGHT_LEVELS))); } void backlight_task(void) {} @@ -292,6 +295,11 @@ void backlight_task(void) {} static uint8_t breathing_halt = BREATHING_NO_HALT; static uint16_t breathing_counter = 0; +static uint8_t breath_scale_counter = 1; +/* Run the breathing loop at ~120Hz*/ +const uint8_t breathing_ISR_frequency = 120; +static uint16_t breathing_freq_scale_factor = 2; + # ifdef BACKLIGHT_PWM_TIMER static bool breathing = false; @@ -319,14 +327,14 @@ bool is_breathing(void) { return !!(TIMSKx & _BV(TOIEx)); } } while (0) # endif -# define breathing_min() \ - do { \ - breathing_counter = 0; \ - } while (0) -# define breathing_max() \ - do { \ - breathing_counter = get_breathing_period() * 244 / 2; \ - } while (0) +# define breathing_min() \ + do { \ + breathing_counter = 0; \ + } while (0) +# define breathing_max() \ + do { \ + breathing_counter = breathing_period * breathing_ISR_frequency / 2; \ + } while (0) void breathing_enable(void) { breathing_counter = 0; @@ -369,21 +377,33 @@ void breathing_task(void) # else /* Assuming a 16MHz CPU clock and a timer that resets at 64k (ICR1), the following interrupt handler will run * about 244 times per second. + * + * The following ISR runs at F_CPU/ISRx. With a 16MHz clock and default pwm resolution, that means 244Hz */ ISR(TIMERx_OVF_vect) # endif { - uint8_t breathing_period = get_breathing_period(); - uint16_t interval = (uint16_t)breathing_period * 244 / BREATHING_STEPS; + + // Only run this ISR at ~120 Hz + if(breath_scale_counter++ == breathing_freq_scale_factor) + { + breath_scale_counter = 1; + } + else + { + return; + } + uint16_t interval = (uint16_t)breathing_period * breathing_ISR_frequency / BREATHING_STEPS; // resetting after one period to prevent ugly reset at overflow. - breathing_counter = (breathing_counter + 1) % (breathing_period * 244); - uint8_t index = breathing_counter / interval % BREATHING_STEPS; + breathing_counter = (breathing_counter + 1) % (breathing_period * breathing_ISR_frequency); + uint8_t index = breathing_counter / interval % BREATHING_STEPS; if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) || ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1))) { breathing_interrupt_disable(); } - set_pwm(cie_lightness(rescale_limit_val(scale_backlight((uint16_t)pgm_read_byte(&breathing_table[index]) * 0x0101U)))); + // Set PWM to a brightnessvalue scaled to the configured resolution + set_pwm(cie_lightness(rescale_limit_val(scale_backlight((uint16_t)pgm_read_byte(&breathing_table[index]) * ICRx / 255)))); } #endif // BACKLIGHT_BREATHING @@ -413,16 +433,23 @@ void backlight_init_ports(void) { "In fast PWM mode, the compare units allow generation of PWM waveforms on the OCnx pins. Setting the COMnx1:0 bits to two will produce a non-inverted PWM [..]." "In fast PWM mode the counter is incremented until the counter value matches either one of the fixed values 0x00FF, 0x01FF, or 0x03FF (WGMn3:0 = 5, 6, or 7), the value in ICRn (WGMn3:0 = 14), or the value in OCRnA (WGMn3:0 = 15)." */ -# if BACKLIGHT_ON_STATE == 1 - TCCRxA = _BV(COMxx1) | _BV(WGM11); -# else - TCCRxA = _BV(COMxx1) | _BV(COMxx0) | _BV(WGM11); -# endif + TCCRxA = _BV(COMxx1) | _BV(WGM11); // = 0b00001010; + TCCRxB = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001; +# endif - TCCRxB = _BV(WGM13) | _BV(WGM12) | _BV(CS10); -#endif - // Use full 16-bit resolution. Counter counts to ICR1 before reset to 0. - ICRx = TIMER_TOP; +# ifdef BACKLIGHT_CUSTOM_RESOLUTION +# if (BACKLIGHT_CUSTOM_RESOLUTION > 0xFFFF || BACKLIGHT_CUSTOM_RESOLUTION < 1) +# error "This out of range of the timer capabilities" +# elif (BACKLIGHT_CUSTOM_RESOLUTION < 0xFF) +# warning "Resolution lower than 0xFF isn't recommended" +# endif +# ifdef BACKLIGHT_BREATHING + breathing_freq_scale_factor = F_CPU / BACKLIGHT_CUSTOM_RESOLUTION / 120; +# endif + ICRx = BACKLIGHT_CUSTOM_RESOLUTION; +# else + ICRx = TIMER_TOP; +# endif backlight_init(); #ifdef BACKLIGHT_BREATHING @@ -430,4 +457,4 @@ void backlight_init_ports(void) { breathing_enable(); } #endif -} +} \ No newline at end of file From cc7600cf0e9c639a325dc1cad18717a218bc820f Mon Sep 17 00:00:00 2001 From: QMK Bot Date: Wed, 17 Nov 2021 13:07:45 -0800 Subject: [PATCH 513/595] Format code according to conventions (#15196) --- quantum/backlight/backlight_avr.c | 55 +++++++++++++++---------------- 1 file changed, 26 insertions(+), 29 deletions(-) diff --git a/quantum/backlight/backlight_avr.c b/quantum/backlight/backlight_avr.c index 59050e2505..e3fe56aba3 100644 --- a/quantum/backlight/backlight_avr.c +++ b/quantum/backlight/backlight_avr.c @@ -237,8 +237,8 @@ static uint16_t cie_lightness(uint16_t v) { return v / 9; // Same as dividing by 900% } else { // In the next two lines values are bit-shifted. This is to avoid loosing decimals in integer math. - uint32_t y = (((uint32_t)v + ICRx / 6) << 5) / (ICRx / 6 + ICRx); // If above 8%, add ~16% of max, and normalize with (max + ~16% max) - uint32_t out = (y * y * y * ICRx) >> 15; // Cube it and undo the bit-shifting. (which is now three times as much due to the cubing) + uint32_t y = (((uint32_t)v + ICRx / 6) << 5) / (ICRx / 6 + ICRx); // If above 8%, add ~16% of max, and normalize with (max + ~16% max) + uint32_t out = (y * y * y * ICRx) >> 15; // Cube it and undo the bit-shifting. (which is now three times as much due to the cubing) if (out > ICRx) // Avoid overflows { @@ -297,7 +297,7 @@ static uint16_t breathing_counter = 0; static uint8_t breath_scale_counter = 1; /* Run the breathing loop at ~120Hz*/ -const uint8_t breathing_ISR_frequency = 120; +const uint8_t breathing_ISR_frequency = 120; static uint16_t breathing_freq_scale_factor = 2; # ifdef BACKLIGHT_PWM_TIMER @@ -327,14 +327,14 @@ bool is_breathing(void) { return !!(TIMSKx & _BV(TOIEx)); } } while (0) # endif -# define breathing_min() \ - do { \ - breathing_counter = 0; \ - } while (0) -# define breathing_max() \ - do { \ - breathing_counter = breathing_period * breathing_ISR_frequency / 2; \ - } while (0) +# define breathing_min() \ + do { \ + breathing_counter = 0; \ + } while (0) +# define breathing_max() \ + do { \ + breathing_counter = breathing_period * breathing_ISR_frequency / 2; \ + } while (0) void breathing_enable(void) { breathing_counter = 0; @@ -385,18 +385,15 @@ ISR(TIMERx_OVF_vect) { // Only run this ISR at ~120 Hz - if(breath_scale_counter++ == breathing_freq_scale_factor) - { + if (breath_scale_counter++ == breathing_freq_scale_factor) { breath_scale_counter = 1; - } - else - { + } else { return; } uint16_t interval = (uint16_t)breathing_period * breathing_ISR_frequency / BREATHING_STEPS; // resetting after one period to prevent ugly reset at overflow. breathing_counter = (breathing_counter + 1) % (breathing_period * breathing_ISR_frequency); - uint8_t index = breathing_counter / interval % BREATHING_STEPS; + uint8_t index = breathing_counter / interval % BREATHING_STEPS; if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) || ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1))) { breathing_interrupt_disable(); @@ -435,21 +432,21 @@ void backlight_init_ports(void) { */ TCCRxA = _BV(COMxx1) | _BV(WGM11); // = 0b00001010; TCCRxB = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001; -# endif +#endif -# ifdef BACKLIGHT_CUSTOM_RESOLUTION -# if (BACKLIGHT_CUSTOM_RESOLUTION > 0xFFFF || BACKLIGHT_CUSTOM_RESOLUTION < 1) -# error "This out of range of the timer capabilities" -# elif (BACKLIGHT_CUSTOM_RESOLUTION < 0xFF) -# warning "Resolution lower than 0xFF isn't recommended" -# endif -# ifdef BACKLIGHT_BREATHING +#ifdef BACKLIGHT_CUSTOM_RESOLUTION +# if (BACKLIGHT_CUSTOM_RESOLUTION > 0xFFFF || BACKLIGHT_CUSTOM_RESOLUTION < 1) +# error "This out of range of the timer capabilities" +# elif (BACKLIGHT_CUSTOM_RESOLUTION < 0xFF) +# warning "Resolution lower than 0xFF isn't recommended" +# endif +# ifdef BACKLIGHT_BREATHING breathing_freq_scale_factor = F_CPU / BACKLIGHT_CUSTOM_RESOLUTION / 120; -# endif +# endif ICRx = BACKLIGHT_CUSTOM_RESOLUTION; -# else - ICRx = TIMER_TOP; -# endif +#else + ICRx = TIMER_TOP; +#endif backlight_init(); #ifdef BACKLIGHT_BREATHING From c5f1e9797ac905c24edc39d1bb12ed2e5537f00a Mon Sep 17 00:00:00 2001 From: peepeetee <43021794+peepeetee@users.noreply.github.com> Date: Thu, 18 Nov 2021 05:37:23 +0800 Subject: [PATCH 514/595] rename kprepublic bm keyboards to have a standardized naming format (#15047) * change missed kprepublic readmes * fix xiudi readmes * initial change, see pr description * change readmes * changes names in readmes and device descriptors --- .../bm40hsrgb/keymaps/gabustoledo/readme.md | 4 ++-- .../bm40hsrgb/keymaps/signynt/readme.md | 4 ++-- .../bm40hsrgb/keymaps/signynt_2_loud/readme.md | 4 ++-- .../bm40hsrgb/keymaps/signynt_2_quiet/readme.md | 4 ++-- .../kprepublic/bm43a/keymaps/stevexyz/readme.md | 4 ++-- .../keymaps/default/keymap.c | 0 .../keymaps/default/readme.md | 0 .../keymaps/jbradforddillon/keymap.c | 0 .../keymaps/jbradforddillon/readme.md | 0 .../{bm60rgb => bm60hsrgb}/keymaps/via/keymap.c | 0 .../{bm60rgb => bm60hsrgb}/keymaps/via/readme.md | 0 .../{bm60rgb => bm60hsrgb}/keymaps/via/rules.mk | 0 .../kprepublic/{bm60rgb => bm60hsrgb}/readme.md | 6 +++--- .../{bm60rgb => bm60hsrgb}/rev1/config.h | 2 +- .../{bm60rgb => bm60hsrgb}/rev1/info.json | 2 +- .../{bm60rgb => bm60hsrgb}/rev1/rev1.c | 0 .../{bm60rgb => bm60hsrgb}/rev1/rev1.h | 0 .../{bm60rgb => bm60hsrgb}/rev1/rules.mk | 0 .../keymaps/default/keymap.c | 0 .../keymaps/default/readme.md | 0 .../keymaps/iso_nordic_sleepmode/config.h | 0 .../keymaps/iso_nordic_sleepmode/keymap.c | 0 .../keymaps/iso_nordic_sleepmode/readme.md | 0 .../{bm60rgb_iso => bm60hsrgb_iso}/readme.md | 8 ++++---- .../{bm60rgb_iso => bm60hsrgb_iso}/rev1/config.h | 2 +- .../rev1/info.json | 2 +- .../{bm60rgb_iso => bm60hsrgb_iso}/rev1/rev1.c | 0 .../{bm60rgb_iso => bm60hsrgb_iso}/rev1/rev1.h | 0 .../{bm60rgb_iso => bm60hsrgb_iso}/rev1/rules.mk | 0 .../keymaps/david/keymap.c | 0 .../keymaps/default/keymap.c | 0 .../keymaps/ipetepete/keymap.c | 0 .../keymaps/ipetepete/readme.md | 0 .../keymaps/ipetepete/rules.mk | 0 .../keymaps/via/keymap.c | 0 .../keymaps/via/rules.mk | 0 .../{bm60poker => bm60hsrgb_poker}/readme.md | 6 +++--- .../{bm60poker => bm60hsrgb_poker}/rev1/config.h | 2 +- .../rev1/info.json | 2 +- .../{bm60poker => bm60hsrgb_poker}/rev1/rev1.c | 0 .../{bm60poker => bm60hsrgb_poker}/rev1/rev1.h | 0 .../{bm60poker => bm60hsrgb_poker}/rev1/rules.mk | 0 .../keymaps/default/keymap.c | 0 .../keymaps/default/readme.md | 0 .../{bm65rgb/rev1 => bm65hsrgb}/readme.md | 10 +++++----- .../{bm65rgb => bm65hsrgb}/rev1/config.h | 2 +- .../{bm65rgb => bm65hsrgb}/rev1/info.json | 2 +- .../{bm65rgb => bm65hsrgb/rev1}/readme.md | 0 .../{bm65rgb => bm65hsrgb}/rev1/rev1.c | 0 .../{bm65rgb => bm65hsrgb}/rev1/rev1.h | 0 .../{bm65rgb => bm65hsrgb}/rev1/rules.mk | 0 .../bm65iso.c => bm65hsrgb_iso/bm65hsrgb_iso.c} | 2 +- .../bm65iso.h => bm65hsrgb_iso/bm65hsrgb_iso.h} | 0 .../{bm65iso => bm65hsrgb_iso}/config.h | 2 +- .../{bm65iso => bm65hsrgb_iso}/info.json | 2 +- .../keymaps/deadolus/config.h | 0 .../keymaps/deadolus/keymap.c | 0 .../keymaps/deadolus/keymap.h | 0 .../keymaps/deadolus/readme.md | 4 ++-- .../keymaps/deadolus/rules.mk | 0 .../keymaps/default/keymap.c | 0 .../keymaps/via/keymap.c | 0 .../keymaps/via/readme.md | 0 .../keymaps/via/rules.mk | 0 .../{bm65iso => bm65hsrgb_iso}/readme.md | 10 +++++----- .../{bm65iso => bm65hsrgb_iso}/rules.mk | 0 .../{bm68rgb/bm68rgb.c => bm68hsrgb/bm68hsrgb.c} | 2 +- .../{bm68rgb/bm68rgb.h => bm68hsrgb/bm68hsrgb.h} | 0 .../kprepublic/{bm68rgb => bm68hsrgb}/config.h | 2 +- .../kprepublic/{bm68rgb => bm68hsrgb}/info.json | 2 +- .../keymaps/default/keymap.c | 0 .../keymaps/default/readme.md | 0 .../keymaps/peepeetee/config.h | 0 .../keymaps/peepeetee/keymap.c | 0 .../keymaps/peepeetee/keymap.h | 0 .../keymaps/peepeetee/readme.md | 0 .../{bm68rgb => bm68hsrgb}/keymaps/via/keymap.c | 0 .../{bm68rgb => bm68hsrgb}/keymaps/via/readme.md | 0 .../{bm68rgb => bm68hsrgb}/keymaps/via/rules.mk | 0 .../kprepublic/{bm68rgb => bm68hsrgb}/readme.md | 10 +++++----- .../kprepublic/{bm68rgb => bm68hsrgb}/rules.mk | 0 .../{bm80/bm80.c => bm80hsrgb/bm80hsrgb.c} | 16 ++++++++-------- .../{bm80/bm80.h => bm80hsrgb/bm80hsrgb.h} | 0 .../kprepublic/{bm80 => bm80hsrgb}/config.h | 0 .../kprepublic/{bm80 => bm80hsrgb}/info.json | 4 ++-- .../{bm80 => bm80hsrgb}/keymaps/default/keymap.c | 0 .../keymaps/default/readme.md | 0 .../keymaps/peepeetee/config.h | 0 .../keymaps/peepeetee/keymap.c | 0 .../{bm80 => bm80hsrgb}/keymaps/via/keymap.c | 0 .../{bm80 => bm80hsrgb}/keymaps/via/readme.md | 0 .../{bm80 => bm80hsrgb}/keymaps/via/rules.mk | 0 .../kprepublic/{bm80 => bm80hsrgb}/readme.md | 10 +++++----- .../kprepublic/{bm80 => bm80hsrgb}/rules.mk | 0 .../kprepublic/jj40/keymaps/cockpit/readme.md | 4 ++-- .../kprepublic/jj40/keymaps/waples/readme.md | 2 +- keyboards/ktec/ergodone/readme.md | 2 +- keyboards/xiudi/xd002/readme.md | 2 +- .../xd004/keymaps/system_and_media/readme.md | 2 +- keyboards/xiudi/xd60/keymaps/Jos/README.md | 2 +- keyboards/xiudi/xd60/keymaps/birkir/readme.md | 2 +- keyboards/xiudi/xd60/keymaps/default/readme.md | 4 ++-- keyboards/xiudi/xd60/keymaps/edulpn/readme.md | 2 +- keyboards/xiudi/xd60/keymaps/edulpn64/readme.md | 2 +- keyboards/xiudi/xd60/keymaps/fvolpe83/readme.md | 2 +- keyboards/xiudi/xd60/keymaps/iso/readme.md | 4 ++-- keyboards/xiudi/xd60/keymaps/kmontag42/readme.md | 2 +- keyboards/xiudi/xd60/keymaps/krusli/readme.md | 2 +- keyboards/xiudi/xd60/keymaps/melka/readme.md | 2 +- keyboards/xiudi/xd60/keymaps/petesmom/README.md | 4 ++-- .../xiudi/xd60/keymaps/semicolonsnet/readme.md | 4 ++-- keyboards/xiudi/xd60/keymaps/styr/readme.md | 2 +- .../xiudi/xd60/keymaps/supercoffee/readme.md | 2 +- keyboards/xiudi/xd60/keymaps/yuuki/README.md | 4 ++-- keyboards/xiudi/xd68/keymaps/default/readme.md | 2 +- .../xiudi/xd68/keymaps/default_iso/readme.md | 2 +- keyboards/xiudi/xd75/keymaps/bbaserdem/readme.md | 2 +- .../xiudi/xd75/keymaps/buzzlighter1/readme.md | 2 +- keyboards/xiudi/xd75/keymaps/clanghans/readme.md | 4 ++-- keyboards/xiudi/xd75/keymaps/colinta/readme.md | 8 ++++---- .../xiudi/xd75/keymaps/developper_bepo/readme.md | 2 +- keyboards/xiudi/xd75/keymaps/french/readme.md | 2 +- keyboards/xiudi/xd75/keymaps/scheiklp/readme.md | 4 ++-- .../xiudi/xd75/keymaps/tdl-jturner/readme.md | 2 +- 124 files changed, 107 insertions(+), 107 deletions(-) rename keyboards/kprepublic/{bm60rgb => bm60hsrgb}/keymaps/default/keymap.c (100%) rename keyboards/kprepublic/{bm60rgb => bm60hsrgb}/keymaps/default/readme.md (100%) rename keyboards/kprepublic/{bm60rgb => bm60hsrgb}/keymaps/jbradforddillon/keymap.c (100%) rename keyboards/kprepublic/{bm60rgb => bm60hsrgb}/keymaps/jbradforddillon/readme.md (100%) rename keyboards/kprepublic/{bm60rgb => bm60hsrgb}/keymaps/via/keymap.c (100%) rename keyboards/kprepublic/{bm60rgb => bm60hsrgb}/keymaps/via/readme.md (100%) rename keyboards/kprepublic/{bm60rgb => bm60hsrgb}/keymaps/via/rules.mk (100%) rename keyboards/kprepublic/{bm60rgb => bm60hsrgb}/readme.md (87%) rename keyboards/kprepublic/{bm60rgb => bm60hsrgb}/rev1/config.h (99%) rename keyboards/kprepublic/{bm60rgb => bm60hsrgb}/rev1/info.json (99%) rename keyboards/kprepublic/{bm60rgb => bm60hsrgb}/rev1/rev1.c (100%) rename keyboards/kprepublic/{bm60rgb => bm60hsrgb}/rev1/rev1.h (100%) rename keyboards/kprepublic/{bm60rgb => bm60hsrgb}/rev1/rules.mk (100%) rename keyboards/kprepublic/{bm60rgb_iso => bm60hsrgb_iso}/keymaps/default/keymap.c (100%) rename keyboards/kprepublic/{bm60rgb_iso => bm60hsrgb_iso}/keymaps/default/readme.md (100%) rename keyboards/kprepublic/{bm60rgb_iso => bm60hsrgb_iso}/keymaps/iso_nordic_sleepmode/config.h (100%) rename keyboards/kprepublic/{bm60rgb_iso => bm60hsrgb_iso}/keymaps/iso_nordic_sleepmode/keymap.c (100%) rename keyboards/kprepublic/{bm60rgb_iso => bm60hsrgb_iso}/keymaps/iso_nordic_sleepmode/readme.md (100%) rename keyboards/kprepublic/{bm60rgb_iso => bm60hsrgb_iso}/readme.md (80%) rename keyboards/kprepublic/{bm60rgb_iso => bm60hsrgb_iso}/rev1/config.h (99%) rename keyboards/kprepublic/{bm60rgb_iso => bm60hsrgb_iso}/rev1/info.json (99%) rename keyboards/kprepublic/{bm60rgb_iso => bm60hsrgb_iso}/rev1/rev1.c (100%) rename keyboards/kprepublic/{bm60rgb_iso => bm60hsrgb_iso}/rev1/rev1.h (100%) rename keyboards/kprepublic/{bm60rgb_iso => bm60hsrgb_iso}/rev1/rules.mk (100%) rename keyboards/kprepublic/{bm60poker => bm60hsrgb_poker}/keymaps/david/keymap.c (100%) rename keyboards/kprepublic/{bm60poker => bm60hsrgb_poker}/keymaps/default/keymap.c (100%) rename keyboards/kprepublic/{bm60poker => bm60hsrgb_poker}/keymaps/ipetepete/keymap.c (100%) rename keyboards/kprepublic/{bm60poker => bm60hsrgb_poker}/keymaps/ipetepete/readme.md (100%) rename keyboards/kprepublic/{bm60poker => bm60hsrgb_poker}/keymaps/ipetepete/rules.mk (100%) rename keyboards/kprepublic/{bm60poker => bm60hsrgb_poker}/keymaps/via/keymap.c (100%) rename keyboards/kprepublic/{bm60poker => bm60hsrgb_poker}/keymaps/via/rules.mk (100%) rename keyboards/kprepublic/{bm60poker => bm60hsrgb_poker}/readme.md (82%) rename keyboards/kprepublic/{bm60poker => bm60hsrgb_poker}/rev1/config.h (99%) rename keyboards/kprepublic/{bm60poker => bm60hsrgb_poker}/rev1/info.json (98%) rename keyboards/kprepublic/{bm60poker => bm60hsrgb_poker}/rev1/rev1.c (100%) rename keyboards/kprepublic/{bm60poker => bm60hsrgb_poker}/rev1/rev1.h (100%) rename keyboards/kprepublic/{bm60poker => bm60hsrgb_poker}/rev1/rules.mk (100%) rename keyboards/kprepublic/{bm65rgb => bm65hsrgb}/keymaps/default/keymap.c (100%) rename keyboards/kprepublic/{bm65rgb => bm65hsrgb}/keymaps/default/readme.md (100%) rename keyboards/kprepublic/{bm65rgb/rev1 => bm65hsrgb}/readme.md (84%) rename keyboards/kprepublic/{bm65rgb => bm65hsrgb}/rev1/config.h (99%) rename keyboards/kprepublic/{bm65rgb => bm65hsrgb}/rev1/info.json (99%) rename keyboards/kprepublic/{bm65rgb => bm65hsrgb/rev1}/readme.md (100%) rename keyboards/kprepublic/{bm65rgb => bm65hsrgb}/rev1/rev1.c (100%) rename keyboards/kprepublic/{bm65rgb => bm65hsrgb}/rev1/rev1.h (100%) rename keyboards/kprepublic/{bm65rgb => bm65hsrgb}/rev1/rules.mk (100%) rename keyboards/kprepublic/{bm65iso/bm65iso.c => bm65hsrgb_iso/bm65hsrgb_iso.c} (99%) rename keyboards/kprepublic/{bm65iso/bm65iso.h => bm65hsrgb_iso/bm65hsrgb_iso.h} (100%) rename keyboards/kprepublic/{bm65iso => bm65hsrgb_iso}/config.h (99%) rename keyboards/kprepublic/{bm65iso => bm65hsrgb_iso}/info.json (99%) rename keyboards/kprepublic/{bm65iso => bm65hsrgb_iso}/keymaps/deadolus/config.h (100%) rename keyboards/kprepublic/{bm65iso => bm65hsrgb_iso}/keymaps/deadolus/keymap.c (100%) rename keyboards/kprepublic/{bm65iso => bm65hsrgb_iso}/keymaps/deadolus/keymap.h (100%) rename keyboards/kprepublic/{bm65iso => bm65hsrgb_iso}/keymaps/deadolus/readme.md (89%) rename keyboards/kprepublic/{bm65iso => bm65hsrgb_iso}/keymaps/deadolus/rules.mk (100%) rename keyboards/kprepublic/{bm65iso => bm65hsrgb_iso}/keymaps/default/keymap.c (100%) rename keyboards/kprepublic/{bm65iso => bm65hsrgb_iso}/keymaps/via/keymap.c (100%) rename keyboards/kprepublic/{bm65iso => bm65hsrgb_iso}/keymaps/via/readme.md (100%) rename keyboards/kprepublic/{bm65iso => bm65hsrgb_iso}/keymaps/via/rules.mk (100%) rename keyboards/kprepublic/{bm65iso => bm65hsrgb_iso}/readme.md (80%) rename keyboards/kprepublic/{bm65iso => bm65hsrgb_iso}/rules.mk (100%) rename keyboards/kprepublic/{bm68rgb/bm68rgb.c => bm68hsrgb/bm68hsrgb.c} (99%) rename keyboards/kprepublic/{bm68rgb/bm68rgb.h => bm68hsrgb/bm68hsrgb.h} (100%) rename keyboards/kprepublic/{bm68rgb => bm68hsrgb}/config.h (99%) rename keyboards/kprepublic/{bm68rgb => bm68hsrgb}/info.json (99%) rename keyboards/kprepublic/{bm68rgb => bm68hsrgb}/keymaps/default/keymap.c (100%) rename keyboards/kprepublic/{bm68rgb => bm68hsrgb}/keymaps/default/readme.md (100%) rename keyboards/kprepublic/{bm68rgb => bm68hsrgb}/keymaps/peepeetee/config.h (100%) rename keyboards/kprepublic/{bm68rgb => bm68hsrgb}/keymaps/peepeetee/keymap.c (100%) rename keyboards/kprepublic/{bm68rgb => bm68hsrgb}/keymaps/peepeetee/keymap.h (100%) rename keyboards/kprepublic/{bm68rgb => bm68hsrgb}/keymaps/peepeetee/readme.md (100%) rename keyboards/kprepublic/{bm68rgb => bm68hsrgb}/keymaps/via/keymap.c (100%) rename keyboards/kprepublic/{bm68rgb => bm68hsrgb}/keymaps/via/readme.md (100%) rename keyboards/kprepublic/{bm68rgb => bm68hsrgb}/keymaps/via/rules.mk (100%) rename keyboards/kprepublic/{bm68rgb => bm68hsrgb}/readme.md (84%) rename keyboards/kprepublic/{bm68rgb => bm68hsrgb}/rules.mk (100%) rename keyboards/kprepublic/{bm80/bm80.c => bm80hsrgb/bm80hsrgb.c} (97%) rename keyboards/kprepublic/{bm80/bm80.h => bm80hsrgb/bm80hsrgb.h} (100%) rename keyboards/kprepublic/{bm80 => bm80hsrgb}/config.h (100%) rename keyboards/kprepublic/{bm80 => bm80hsrgb}/info.json (99%) rename keyboards/kprepublic/{bm80 => bm80hsrgb}/keymaps/default/keymap.c (100%) rename keyboards/kprepublic/{bm80 => bm80hsrgb}/keymaps/default/readme.md (100%) rename keyboards/kprepublic/{bm80 => bm80hsrgb}/keymaps/peepeetee/config.h (100%) rename keyboards/kprepublic/{bm80 => bm80hsrgb}/keymaps/peepeetee/keymap.c (100%) rename keyboards/kprepublic/{bm80 => bm80hsrgb}/keymaps/via/keymap.c (100%) rename keyboards/kprepublic/{bm80 => bm80hsrgb}/keymaps/via/readme.md (100%) rename keyboards/kprepublic/{bm80 => bm80hsrgb}/keymaps/via/rules.mk (100%) rename keyboards/kprepublic/{bm80 => bm80hsrgb}/readme.md (88%) rename keyboards/kprepublic/{bm80 => bm80hsrgb}/rules.mk (100%) diff --git a/keyboards/kprepublic/bm40hsrgb/keymaps/gabustoledo/readme.md b/keyboards/kprepublic/bm40hsrgb/keymaps/gabustoledo/readme.md index 40ad85b700..7540bc56bf 100644 --- a/keyboards/kprepublic/bm40hsrgb/keymaps/gabustoledo/readme.md +++ b/keyboards/kprepublic/bm40hsrgb/keymaps/gabustoledo/readme.md @@ -4,13 +4,13 @@ - Compile: - `qmk compile -kb bm40hsrgb -km gabustoledo` + `qmk compile -kb kprepublic/bm40hsrgb -km gabustoledo` ### Flash - Flash: - `qmk flash -kb bm40hsrgb -km gabustoledo` + `qmk flash -kb kprepublic/bm40hsrgb -km gabustoledo` # Layout diff --git a/keyboards/kprepublic/bm40hsrgb/keymaps/signynt/readme.md b/keyboards/kprepublic/bm40hsrgb/keymaps/signynt/readme.md index 938803c268..97c09be255 100644 --- a/keyboards/kprepublic/bm40hsrgb/keymaps/signynt/readme.md +++ b/keyboards/kprepublic/bm40hsrgb/keymaps/signynt/readme.md @@ -30,11 +30,11 @@ Sigma Squared modifies on **Miryoku** in the following ways: - to directly flash to board: - `qmk flash -kb bm40hsrgb -km signynt` + `qmk flash -kb kprepublic/bm40hsrgb -km signynt` - to only compile: - `qmk compile -kb bm40hsrgb -km signynt` + `qmk compile -kb kprepublic/bm40hsrgb -km signynt` diff --git a/keyboards/kprepublic/bm40hsrgb/keymaps/signynt_2_loud/readme.md b/keyboards/kprepublic/bm40hsrgb/keymaps/signynt_2_loud/readme.md index 938803c268..97c09be255 100644 --- a/keyboards/kprepublic/bm40hsrgb/keymaps/signynt_2_loud/readme.md +++ b/keyboards/kprepublic/bm40hsrgb/keymaps/signynt_2_loud/readme.md @@ -30,11 +30,11 @@ Sigma Squared modifies on **Miryoku** in the following ways: - to directly flash to board: - `qmk flash -kb bm40hsrgb -km signynt` + `qmk flash -kb kprepublic/bm40hsrgb -km signynt` - to only compile: - `qmk compile -kb bm40hsrgb -km signynt` + `qmk compile -kb kprepublic/bm40hsrgb -km signynt` diff --git a/keyboards/kprepublic/bm40hsrgb/keymaps/signynt_2_quiet/readme.md b/keyboards/kprepublic/bm40hsrgb/keymaps/signynt_2_quiet/readme.md index 938803c268..97c09be255 100644 --- a/keyboards/kprepublic/bm40hsrgb/keymaps/signynt_2_quiet/readme.md +++ b/keyboards/kprepublic/bm40hsrgb/keymaps/signynt_2_quiet/readme.md @@ -30,11 +30,11 @@ Sigma Squared modifies on **Miryoku** in the following ways: - to directly flash to board: - `qmk flash -kb bm40hsrgb -km signynt` + `qmk flash -kb kprepublic/bm40hsrgb -km signynt` - to only compile: - `qmk compile -kb bm40hsrgb -km signynt` + `qmk compile -kb kprepublic/bm40hsrgb -km signynt` diff --git a/keyboards/kprepublic/bm43a/keymaps/stevexyz/readme.md b/keyboards/kprepublic/bm43a/keymaps/stevexyz/readme.md index 56d0823d19..1cb87d6ec2 100644 --- a/keyboards/kprepublic/bm43a/keymaps/stevexyz/readme.md +++ b/keyboards/kprepublic/bm43a/keymaps/stevexyz/readme.md @@ -19,7 +19,7 @@ And a view on the actual build: ![layout](https://raw.githubusercontent.com/stevexyz/qmk_firmware/master/keyboards/bm43a/keymaps/stevexyz/actualbuild.jpeg) -In order to compile the module from qmk root directory use the command 'make bm43a:stevexyz' +In order to compile the module from qmk root directory use the command 'make kprepublic/bm43a:stevexyz' -And in order to upload the new firmware use the command: 'qmk flash -kb bm43a -km stevexyz' (you can initiate programming with keyboard RESET key, that in this keymap has been moved on the backspace button in the "lights" layer) +And in order to upload the new firmware use the command: 'qmk flash -kb kprepublic/bm43a -km stevexyz' (you can initiate programming with keyboard RESET key, that in this keymap has been moved on the backspace button in the "lights" layer) diff --git a/keyboards/kprepublic/bm60rgb/keymaps/default/keymap.c b/keyboards/kprepublic/bm60hsrgb/keymaps/default/keymap.c similarity index 100% rename from keyboards/kprepublic/bm60rgb/keymaps/default/keymap.c rename to keyboards/kprepublic/bm60hsrgb/keymaps/default/keymap.c diff --git a/keyboards/kprepublic/bm60rgb/keymaps/default/readme.md b/keyboards/kprepublic/bm60hsrgb/keymaps/default/readme.md similarity index 100% rename from keyboards/kprepublic/bm60rgb/keymaps/default/readme.md rename to keyboards/kprepublic/bm60hsrgb/keymaps/default/readme.md diff --git a/keyboards/kprepublic/bm60rgb/keymaps/jbradforddillon/keymap.c b/keyboards/kprepublic/bm60hsrgb/keymaps/jbradforddillon/keymap.c similarity index 100% rename from keyboards/kprepublic/bm60rgb/keymaps/jbradforddillon/keymap.c rename to keyboards/kprepublic/bm60hsrgb/keymaps/jbradforddillon/keymap.c diff --git a/keyboards/kprepublic/bm60rgb/keymaps/jbradforddillon/readme.md b/keyboards/kprepublic/bm60hsrgb/keymaps/jbradforddillon/readme.md similarity index 100% rename from keyboards/kprepublic/bm60rgb/keymaps/jbradforddillon/readme.md rename to keyboards/kprepublic/bm60hsrgb/keymaps/jbradforddillon/readme.md diff --git a/keyboards/kprepublic/bm60rgb/keymaps/via/keymap.c b/keyboards/kprepublic/bm60hsrgb/keymaps/via/keymap.c similarity index 100% rename from keyboards/kprepublic/bm60rgb/keymaps/via/keymap.c rename to keyboards/kprepublic/bm60hsrgb/keymaps/via/keymap.c diff --git a/keyboards/kprepublic/bm60rgb/keymaps/via/readme.md b/keyboards/kprepublic/bm60hsrgb/keymaps/via/readme.md similarity index 100% rename from keyboards/kprepublic/bm60rgb/keymaps/via/readme.md rename to keyboards/kprepublic/bm60hsrgb/keymaps/via/readme.md diff --git a/keyboards/kprepublic/bm60rgb/keymaps/via/rules.mk b/keyboards/kprepublic/bm60hsrgb/keymaps/via/rules.mk similarity index 100% rename from keyboards/kprepublic/bm60rgb/keymaps/via/rules.mk rename to keyboards/kprepublic/bm60hsrgb/keymaps/via/rules.mk diff --git a/keyboards/kprepublic/bm60rgb/readme.md b/keyboards/kprepublic/bm60hsrgb/readme.md similarity index 87% rename from keyboards/kprepublic/bm60rgb/readme.md rename to keyboards/kprepublic/bm60hsrgb/readme.md index 2a41d7eaaf..bbb6ba45a1 100644 --- a/keyboards/kprepublic/bm60rgb/readme.md +++ b/keyboards/kprepublic/bm60hsrgb/readme.md @@ -1,13 +1,13 @@ -# BM60 RGB +# BM60HSRGB A 60% hotswap inswitch RGB keyboard from KP Republic. * Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) -* Hardware Supported: BM60 RGB +* Hardware Supported: BM60HSRGB * Hardware Availability: [KP Republic](https://kprepublic.com/products/bm60-rgb-60-gh60-hot-swappable-pcb-programmed-qmk-firmware-type-c) Make example for this keyboard (after setting up your build environment): - make kprepublic/bm60rgb/rev1:default + make kprepublic/bm60hsrgb/rev1:default See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/kprepublic/bm60rgb/rev1/config.h b/keyboards/kprepublic/bm60hsrgb/rev1/config.h similarity index 99% rename from keyboards/kprepublic/bm60rgb/rev1/config.h rename to keyboards/kprepublic/bm60hsrgb/rev1/config.h index fd1001e514..b8f002dca6 100644 --- a/keyboards/kprepublic/bm60rgb/rev1/config.h +++ b/keyboards/kprepublic/bm60hsrgb/rev1/config.h @@ -24,7 +24,7 @@ along with this program. If not, see . #define PRODUCT_ID 0xEF8C #define DEVICE_VER 0x0001 #define MANUFACTURER KP Republic -#define PRODUCT BM60 RGB +#define PRODUCT BM60HSRGB /* key matrix size */ #define MATRIX_ROWS 5 diff --git a/keyboards/kprepublic/bm60rgb/rev1/info.json b/keyboards/kprepublic/bm60hsrgb/rev1/info.json similarity index 99% rename from keyboards/kprepublic/bm60rgb/rev1/info.json rename to keyboards/kprepublic/bm60hsrgb/rev1/info.json index 264286334a..a5fb20a008 100644 --- a/keyboards/kprepublic/bm60rgb/rev1/info.json +++ b/keyboards/kprepublic/bm60hsrgb/rev1/info.json @@ -1,5 +1,5 @@ { - "keyboard_name": "BM60 RGB", + "keyboard_name": "BM60HSRGB", "url": "", "maintainer": "qmk", "layout_aliases": { diff --git a/keyboards/kprepublic/bm60rgb/rev1/rev1.c b/keyboards/kprepublic/bm60hsrgb/rev1/rev1.c similarity index 100% rename from keyboards/kprepublic/bm60rgb/rev1/rev1.c rename to keyboards/kprepublic/bm60hsrgb/rev1/rev1.c diff --git a/keyboards/kprepublic/bm60rgb/rev1/rev1.h b/keyboards/kprepublic/bm60hsrgb/rev1/rev1.h similarity index 100% rename from keyboards/kprepublic/bm60rgb/rev1/rev1.h rename to keyboards/kprepublic/bm60hsrgb/rev1/rev1.h diff --git a/keyboards/kprepublic/bm60rgb/rev1/rules.mk b/keyboards/kprepublic/bm60hsrgb/rev1/rules.mk similarity index 100% rename from keyboards/kprepublic/bm60rgb/rev1/rules.mk rename to keyboards/kprepublic/bm60hsrgb/rev1/rules.mk diff --git a/keyboards/kprepublic/bm60rgb_iso/keymaps/default/keymap.c b/keyboards/kprepublic/bm60hsrgb_iso/keymaps/default/keymap.c similarity index 100% rename from keyboards/kprepublic/bm60rgb_iso/keymaps/default/keymap.c rename to keyboards/kprepublic/bm60hsrgb_iso/keymaps/default/keymap.c diff --git a/keyboards/kprepublic/bm60rgb_iso/keymaps/default/readme.md b/keyboards/kprepublic/bm60hsrgb_iso/keymaps/default/readme.md similarity index 100% rename from keyboards/kprepublic/bm60rgb_iso/keymaps/default/readme.md rename to keyboards/kprepublic/bm60hsrgb_iso/keymaps/default/readme.md diff --git a/keyboards/kprepublic/bm60rgb_iso/keymaps/iso_nordic_sleepmode/config.h b/keyboards/kprepublic/bm60hsrgb_iso/keymaps/iso_nordic_sleepmode/config.h similarity index 100% rename from keyboards/kprepublic/bm60rgb_iso/keymaps/iso_nordic_sleepmode/config.h rename to keyboards/kprepublic/bm60hsrgb_iso/keymaps/iso_nordic_sleepmode/config.h diff --git a/keyboards/kprepublic/bm60rgb_iso/keymaps/iso_nordic_sleepmode/keymap.c b/keyboards/kprepublic/bm60hsrgb_iso/keymaps/iso_nordic_sleepmode/keymap.c similarity index 100% rename from keyboards/kprepublic/bm60rgb_iso/keymaps/iso_nordic_sleepmode/keymap.c rename to keyboards/kprepublic/bm60hsrgb_iso/keymaps/iso_nordic_sleepmode/keymap.c diff --git a/keyboards/kprepublic/bm60rgb_iso/keymaps/iso_nordic_sleepmode/readme.md b/keyboards/kprepublic/bm60hsrgb_iso/keymaps/iso_nordic_sleepmode/readme.md similarity index 100% rename from keyboards/kprepublic/bm60rgb_iso/keymaps/iso_nordic_sleepmode/readme.md rename to keyboards/kprepublic/bm60hsrgb_iso/keymaps/iso_nordic_sleepmode/readme.md diff --git a/keyboards/kprepublic/bm60rgb_iso/readme.md b/keyboards/kprepublic/bm60hsrgb_iso/readme.md similarity index 80% rename from keyboards/kprepublic/bm60rgb_iso/readme.md rename to keyboards/kprepublic/bm60hsrgb_iso/readme.md index a39a0b3743..5cef32cbeb 100644 --- a/keyboards/kprepublic/bm60rgb_iso/readme.md +++ b/keyboards/kprepublic/bm60hsrgb_iso/readme.md @@ -1,6 +1,6 @@ -# BM60 RGB ISO +# BM60HSRGB_ISO -![BM60 RGB ISO](https://i.imgur.com/i3gk2vql.jpg) +![BM60HSRGB_ISO](https://i.imgur.com/i3gk2vql.jpg) A 60% ISO hotswap inswitch RGB keyboard. @@ -10,10 +10,10 @@ A 60% ISO hotswap inswitch RGB keyboard. Make example for this keyboard (after setting up your build environment): - make kprepublic/bm60rgb_iso/rev1:default + make kprepublic/bm60hsrgb_iso/rev1:default Flashing example for this keyboard: - make kprepublic/bm60rgb_iso:default:flash + make kprepublic/bm60hsrgb_iso:default:flash See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/kprepublic/bm60rgb_iso/rev1/config.h b/keyboards/kprepublic/bm60hsrgb_iso/rev1/config.h similarity index 99% rename from keyboards/kprepublic/bm60rgb_iso/rev1/config.h rename to keyboards/kprepublic/bm60hsrgb_iso/rev1/config.h index a9545cab90..42b9d2afb1 100644 --- a/keyboards/kprepublic/bm60rgb_iso/rev1/config.h +++ b/keyboards/kprepublic/bm60hsrgb_iso/rev1/config.h @@ -24,7 +24,7 @@ along with this program. If not, see . #define PRODUCT_ID 0xEF8C #define DEVICE_VER 0x0001 #define MANUFACTURER KPRepublic -#define PRODUCT bm60hsrgb-iso +#define PRODUCT BM60HSRGB_ISO /* key matrix size */ #define MATRIX_ROWS 5 diff --git a/keyboards/kprepublic/bm60rgb_iso/rev1/info.json b/keyboards/kprepublic/bm60hsrgb_iso/rev1/info.json similarity index 99% rename from keyboards/kprepublic/bm60rgb_iso/rev1/info.json rename to keyboards/kprepublic/bm60hsrgb_iso/rev1/info.json index 39da4b5460..b53600e44d 100644 --- a/keyboards/kprepublic/bm60rgb_iso/rev1/info.json +++ b/keyboards/kprepublic/bm60hsrgb_iso/rev1/info.json @@ -1,5 +1,5 @@ { - "keyboard_name": "BM60 RGB ISO", + "keyboard_name": "BM60HSRGB_ISO", "url": "", "maintainer": "qmk", "layouts": { diff --git a/keyboards/kprepublic/bm60rgb_iso/rev1/rev1.c b/keyboards/kprepublic/bm60hsrgb_iso/rev1/rev1.c similarity index 100% rename from keyboards/kprepublic/bm60rgb_iso/rev1/rev1.c rename to keyboards/kprepublic/bm60hsrgb_iso/rev1/rev1.c diff --git a/keyboards/kprepublic/bm60rgb_iso/rev1/rev1.h b/keyboards/kprepublic/bm60hsrgb_iso/rev1/rev1.h similarity index 100% rename from keyboards/kprepublic/bm60rgb_iso/rev1/rev1.h rename to keyboards/kprepublic/bm60hsrgb_iso/rev1/rev1.h diff --git a/keyboards/kprepublic/bm60rgb_iso/rev1/rules.mk b/keyboards/kprepublic/bm60hsrgb_iso/rev1/rules.mk similarity index 100% rename from keyboards/kprepublic/bm60rgb_iso/rev1/rules.mk rename to keyboards/kprepublic/bm60hsrgb_iso/rev1/rules.mk diff --git a/keyboards/kprepublic/bm60poker/keymaps/david/keymap.c b/keyboards/kprepublic/bm60hsrgb_poker/keymaps/david/keymap.c similarity index 100% rename from keyboards/kprepublic/bm60poker/keymaps/david/keymap.c rename to keyboards/kprepublic/bm60hsrgb_poker/keymaps/david/keymap.c diff --git a/keyboards/kprepublic/bm60poker/keymaps/default/keymap.c b/keyboards/kprepublic/bm60hsrgb_poker/keymaps/default/keymap.c similarity index 100% rename from keyboards/kprepublic/bm60poker/keymaps/default/keymap.c rename to keyboards/kprepublic/bm60hsrgb_poker/keymaps/default/keymap.c diff --git a/keyboards/kprepublic/bm60poker/keymaps/ipetepete/keymap.c b/keyboards/kprepublic/bm60hsrgb_poker/keymaps/ipetepete/keymap.c similarity index 100% rename from keyboards/kprepublic/bm60poker/keymaps/ipetepete/keymap.c rename to keyboards/kprepublic/bm60hsrgb_poker/keymaps/ipetepete/keymap.c diff --git a/keyboards/kprepublic/bm60poker/keymaps/ipetepete/readme.md b/keyboards/kprepublic/bm60hsrgb_poker/keymaps/ipetepete/readme.md similarity index 100% rename from keyboards/kprepublic/bm60poker/keymaps/ipetepete/readme.md rename to keyboards/kprepublic/bm60hsrgb_poker/keymaps/ipetepete/readme.md diff --git a/keyboards/kprepublic/bm60poker/keymaps/ipetepete/rules.mk b/keyboards/kprepublic/bm60hsrgb_poker/keymaps/ipetepete/rules.mk similarity index 100% rename from keyboards/kprepublic/bm60poker/keymaps/ipetepete/rules.mk rename to keyboards/kprepublic/bm60hsrgb_poker/keymaps/ipetepete/rules.mk diff --git a/keyboards/kprepublic/bm60poker/keymaps/via/keymap.c b/keyboards/kprepublic/bm60hsrgb_poker/keymaps/via/keymap.c similarity index 100% rename from keyboards/kprepublic/bm60poker/keymaps/via/keymap.c rename to keyboards/kprepublic/bm60hsrgb_poker/keymaps/via/keymap.c diff --git a/keyboards/kprepublic/bm60poker/keymaps/via/rules.mk b/keyboards/kprepublic/bm60hsrgb_poker/keymaps/via/rules.mk similarity index 100% rename from keyboards/kprepublic/bm60poker/keymaps/via/rules.mk rename to keyboards/kprepublic/bm60hsrgb_poker/keymaps/via/rules.mk diff --git a/keyboards/kprepublic/bm60poker/readme.md b/keyboards/kprepublic/bm60hsrgb_poker/readme.md similarity index 82% rename from keyboards/kprepublic/bm60poker/readme.md rename to keyboards/kprepublic/bm60hsrgb_poker/readme.md index 6b60853885..ef29166df8 100644 --- a/keyboards/kprepublic/bm60poker/readme.md +++ b/keyboards/kprepublic/bm60hsrgb_poker/readme.md @@ -1,13 +1,13 @@ -# BM60 Poker 60% Mechanical Keyboard RGB PCB +# BM60HSRGB_Poker 60% Mechanical Keyboard RGB PCB A 60% hotswap inswitch RGB (north facing) keyboard from KP Republic. * Keyboard Maintainer: [ipetepete](https://github.com/ipetepete) -* Hardware Supported: BM60 POKER RGB +* Hardware Supported: BM60HSRGB_Poker * Hardware Availability: [KP Republic](https://kprepublic.com/products/bm60-rgb-poker-60-gh60-hot-swap-custom-mechanical-keyboard-pcb-program-qmk-underglow-type-c) Make example for this keyboard (after setting up your build environment): - make kprepublic/bm60poker/rev1:default + make kprepublic/bm60hsrgb_poker/rev1:default See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/kprepublic/bm60poker/rev1/config.h b/keyboards/kprepublic/bm60hsrgb_poker/rev1/config.h similarity index 99% rename from keyboards/kprepublic/bm60poker/rev1/config.h rename to keyboards/kprepublic/bm60hsrgb_poker/rev1/config.h index 06bd889053..a3aab0e65e 100644 --- a/keyboards/kprepublic/bm60poker/rev1/config.h +++ b/keyboards/kprepublic/bm60hsrgb_poker/rev1/config.h @@ -24,7 +24,7 @@ along with this program. If not, see . #define PRODUCT_ID 0xEF8D #define DEVICE_VER 0x0001 #define MANUFACTURER KP Republic -#define PRODUCT BM60 RGB POKER +#define PRODUCT BM60HSRGB_POKER /* key matrix size */ #define MATRIX_ROWS 5 diff --git a/keyboards/kprepublic/bm60poker/rev1/info.json b/keyboards/kprepublic/bm60hsrgb_poker/rev1/info.json similarity index 98% rename from keyboards/kprepublic/bm60poker/rev1/info.json rename to keyboards/kprepublic/bm60hsrgb_poker/rev1/info.json index fa461ab83f..09abf6e353 100644 --- a/keyboards/kprepublic/bm60poker/rev1/info.json +++ b/keyboards/kprepublic/bm60hsrgb_poker/rev1/info.json @@ -1,5 +1,5 @@ { - "keyboard_name": "BM60 POKER RGB", + "keyboard_name": "BM60HSRGB_POKER", "url": "", "maintainer": "qmk", "layouts": { diff --git a/keyboards/kprepublic/bm60poker/rev1/rev1.c b/keyboards/kprepublic/bm60hsrgb_poker/rev1/rev1.c similarity index 100% rename from keyboards/kprepublic/bm60poker/rev1/rev1.c rename to keyboards/kprepublic/bm60hsrgb_poker/rev1/rev1.c diff --git a/keyboards/kprepublic/bm60poker/rev1/rev1.h b/keyboards/kprepublic/bm60hsrgb_poker/rev1/rev1.h similarity index 100% rename from keyboards/kprepublic/bm60poker/rev1/rev1.h rename to keyboards/kprepublic/bm60hsrgb_poker/rev1/rev1.h diff --git a/keyboards/kprepublic/bm60poker/rev1/rules.mk b/keyboards/kprepublic/bm60hsrgb_poker/rev1/rules.mk similarity index 100% rename from keyboards/kprepublic/bm60poker/rev1/rules.mk rename to keyboards/kprepublic/bm60hsrgb_poker/rev1/rules.mk diff --git a/keyboards/kprepublic/bm65rgb/keymaps/default/keymap.c b/keyboards/kprepublic/bm65hsrgb/keymaps/default/keymap.c similarity index 100% rename from keyboards/kprepublic/bm65rgb/keymaps/default/keymap.c rename to keyboards/kprepublic/bm65hsrgb/keymaps/default/keymap.c diff --git a/keyboards/kprepublic/bm65rgb/keymaps/default/readme.md b/keyboards/kprepublic/bm65hsrgb/keymaps/default/readme.md similarity index 100% rename from keyboards/kprepublic/bm65rgb/keymaps/default/readme.md rename to keyboards/kprepublic/bm65hsrgb/keymaps/default/readme.md diff --git a/keyboards/kprepublic/bm65rgb/rev1/readme.md b/keyboards/kprepublic/bm65hsrgb/readme.md similarity index 84% rename from keyboards/kprepublic/bm65rgb/rev1/readme.md rename to keyboards/kprepublic/bm65hsrgb/readme.md index 119d05d20e..d660861296 100644 --- a/keyboards/kprepublic/bm65rgb/rev1/readme.md +++ b/keyboards/kprepublic/bm65hsrgb/readme.md @@ -1,20 +1,20 @@ -# bm65rgb +# BM65HSRGB -![bm65rgb](https://i.imgur.com/DskSCve.jpeg) +![BM65HSRGB](https://i.imgur.com/DskSCve.jpeg) A 65% hotswap in switch RGB keyboard from KPRepublic. * Keyboard Maintainer: [bytesapart](https://github.com/bytesapart) -* Hardware Supported: BM65 RGB +* Hardware Supported: BM65HSRGB * Hardware Availability: [KP Republic](https://kprepublic.com/products/bm65rgb-bm65-rgb-65-hot-swappable-custom-mechanical-keyboard-pcb-programmed-qmk-via-firmware-full-rgb-switch-underglow-type-c?_pos=1&_sid=5b9a6a5d0&_ss=r) Make example for this keyboard (after setting up your build environment): - make kprepublic/bm65rgb/rev1:default + make kprepublic/bm65hsrgb/rev1:default Flashing example for this keyboard: - make kprepublic/bm65rgb/rev1:default:flash + make kprepublic/bm65hsrgb/rev1:default:flash To reset the board into bootloader mode, do one of the following: diff --git a/keyboards/kprepublic/bm65rgb/rev1/config.h b/keyboards/kprepublic/bm65hsrgb/rev1/config.h similarity index 99% rename from keyboards/kprepublic/bm65rgb/rev1/config.h rename to keyboards/kprepublic/bm65hsrgb/rev1/config.h index 21624b9f16..1fbfab9368 100644 --- a/keyboards/kprepublic/bm65rgb/rev1/config.h +++ b/keyboards/kprepublic/bm65hsrgb/rev1/config.h @@ -24,7 +24,7 @@ along with this program. If not, see . #define PRODUCT_ID 0xEF6E #define DEVICE_VER 0x0001 #define MANUFACTURER KPRepublic -#define PRODUCT BM65 RGB +#define PRODUCT BM65HSRGB /* key matrix size */ #define MATRIX_ROWS 5 diff --git a/keyboards/kprepublic/bm65rgb/rev1/info.json b/keyboards/kprepublic/bm65hsrgb/rev1/info.json similarity index 99% rename from keyboards/kprepublic/bm65rgb/rev1/info.json rename to keyboards/kprepublic/bm65hsrgb/rev1/info.json index d69fb8e5cf..788f8be23e 100644 --- a/keyboards/kprepublic/bm65rgb/rev1/info.json +++ b/keyboards/kprepublic/bm65hsrgb/rev1/info.json @@ -1,5 +1,5 @@ { - "keyboard_name": "bm65rgb", + "keyboard_name": "BM65HSRGB", "url": "", "maintainer": "bytesapart", "layouts": { diff --git a/keyboards/kprepublic/bm65rgb/readme.md b/keyboards/kprepublic/bm65hsrgb/rev1/readme.md similarity index 100% rename from keyboards/kprepublic/bm65rgb/readme.md rename to keyboards/kprepublic/bm65hsrgb/rev1/readme.md diff --git a/keyboards/kprepublic/bm65rgb/rev1/rev1.c b/keyboards/kprepublic/bm65hsrgb/rev1/rev1.c similarity index 100% rename from keyboards/kprepublic/bm65rgb/rev1/rev1.c rename to keyboards/kprepublic/bm65hsrgb/rev1/rev1.c diff --git a/keyboards/kprepublic/bm65rgb/rev1/rev1.h b/keyboards/kprepublic/bm65hsrgb/rev1/rev1.h similarity index 100% rename from keyboards/kprepublic/bm65rgb/rev1/rev1.h rename to keyboards/kprepublic/bm65hsrgb/rev1/rev1.h diff --git a/keyboards/kprepublic/bm65rgb/rev1/rules.mk b/keyboards/kprepublic/bm65hsrgb/rev1/rules.mk similarity index 100% rename from keyboards/kprepublic/bm65rgb/rev1/rules.mk rename to keyboards/kprepublic/bm65hsrgb/rev1/rules.mk diff --git a/keyboards/kprepublic/bm65iso/bm65iso.c b/keyboards/kprepublic/bm65hsrgb_iso/bm65hsrgb_iso.c similarity index 99% rename from keyboards/kprepublic/bm65iso/bm65iso.c rename to keyboards/kprepublic/bm65hsrgb_iso/bm65hsrgb_iso.c index de2aba21c3..134c271824 100644 --- a/keyboards/kprepublic/bm65iso/bm65iso.c +++ b/keyboards/kprepublic/bm65hsrgb_iso/bm65hsrgb_iso.c @@ -13,7 +13,7 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ -#include "bm65iso.h" +#include "bm65hsrgb_iso.h" #ifdef RGB_MATRIX_ENABLE led_config_t g_led_config = { { diff --git a/keyboards/kprepublic/bm65iso/bm65iso.h b/keyboards/kprepublic/bm65hsrgb_iso/bm65hsrgb_iso.h similarity index 100% rename from keyboards/kprepublic/bm65iso/bm65iso.h rename to keyboards/kprepublic/bm65hsrgb_iso/bm65hsrgb_iso.h diff --git a/keyboards/kprepublic/bm65iso/config.h b/keyboards/kprepublic/bm65hsrgb_iso/config.h similarity index 99% rename from keyboards/kprepublic/bm65iso/config.h rename to keyboards/kprepublic/bm65hsrgb_iso/config.h index c6508b0817..30b27dc26e 100644 --- a/keyboards/kprepublic/bm65iso/config.h +++ b/keyboards/kprepublic/bm65hsrgb_iso/config.h @@ -24,7 +24,7 @@ along with this program. If not, see . #define PRODUCT_ID 0x0653 #define DEVICE_VER 0x0001 #define MANUFACTURER KP Republic -#define PRODUCT BM65ISO +#define PRODUCT BM65HSRGB_ISO /* key matrix size */ #define MATRIX_ROWS 5 diff --git a/keyboards/kprepublic/bm65iso/info.json b/keyboards/kprepublic/bm65hsrgb_iso/info.json similarity index 99% rename from keyboards/kprepublic/bm65iso/info.json rename to keyboards/kprepublic/bm65hsrgb_iso/info.json index c987415fb4..9212c43339 100644 --- a/keyboards/kprepublic/bm65iso/info.json +++ b/keyboards/kprepublic/bm65hsrgb_iso/info.json @@ -1,5 +1,5 @@ { - "keyboard_name": "bm65iso", + "keyboard_name": "BM65HSRGB_ISO", "url": "", "maintainer": "qmk", "layouts": { diff --git a/keyboards/kprepublic/bm65iso/keymaps/deadolus/config.h b/keyboards/kprepublic/bm65hsrgb_iso/keymaps/deadolus/config.h similarity index 100% rename from keyboards/kprepublic/bm65iso/keymaps/deadolus/config.h rename to keyboards/kprepublic/bm65hsrgb_iso/keymaps/deadolus/config.h diff --git a/keyboards/kprepublic/bm65iso/keymaps/deadolus/keymap.c b/keyboards/kprepublic/bm65hsrgb_iso/keymaps/deadolus/keymap.c similarity index 100% rename from keyboards/kprepublic/bm65iso/keymaps/deadolus/keymap.c rename to keyboards/kprepublic/bm65hsrgb_iso/keymaps/deadolus/keymap.c diff --git a/keyboards/kprepublic/bm65iso/keymaps/deadolus/keymap.h b/keyboards/kprepublic/bm65hsrgb_iso/keymaps/deadolus/keymap.h similarity index 100% rename from keyboards/kprepublic/bm65iso/keymaps/deadolus/keymap.h rename to keyboards/kprepublic/bm65hsrgb_iso/keymaps/deadolus/keymap.h diff --git a/keyboards/kprepublic/bm65iso/keymaps/deadolus/readme.md b/keyboards/kprepublic/bm65hsrgb_iso/keymaps/deadolus/readme.md similarity index 89% rename from keyboards/kprepublic/bm65iso/keymaps/deadolus/readme.md rename to keyboards/kprepublic/bm65hsrgb_iso/keymaps/deadolus/readme.md index 6080e5b9ab..095550b01a 100644 --- a/keyboards/kprepublic/bm65iso/keymaps/deadolus/readme.md +++ b/keyboards/kprepublic/bm65hsrgb_iso/keymaps/deadolus/readme.md @@ -11,10 +11,10 @@ Make example for this keyboard (after setting up your build environment): - make bm65iso:deadolus + make kprepublic/bm65hsrgb_iso:deadolus Flashing example for this keyboard: - make bm65iso:deadolus:flash + make kprepublic/bm65hsrgb_iso:deadolus:flash Keyboard Maintainer: **[deadolus](https://github.com/deadolus)** diff --git a/keyboards/kprepublic/bm65iso/keymaps/deadolus/rules.mk b/keyboards/kprepublic/bm65hsrgb_iso/keymaps/deadolus/rules.mk similarity index 100% rename from keyboards/kprepublic/bm65iso/keymaps/deadolus/rules.mk rename to keyboards/kprepublic/bm65hsrgb_iso/keymaps/deadolus/rules.mk diff --git a/keyboards/kprepublic/bm65iso/keymaps/default/keymap.c b/keyboards/kprepublic/bm65hsrgb_iso/keymaps/default/keymap.c similarity index 100% rename from keyboards/kprepublic/bm65iso/keymaps/default/keymap.c rename to keyboards/kprepublic/bm65hsrgb_iso/keymaps/default/keymap.c diff --git a/keyboards/kprepublic/bm65iso/keymaps/via/keymap.c b/keyboards/kprepublic/bm65hsrgb_iso/keymaps/via/keymap.c similarity index 100% rename from keyboards/kprepublic/bm65iso/keymaps/via/keymap.c rename to keyboards/kprepublic/bm65hsrgb_iso/keymaps/via/keymap.c diff --git a/keyboards/kprepublic/bm65iso/keymaps/via/readme.md b/keyboards/kprepublic/bm65hsrgb_iso/keymaps/via/readme.md similarity index 100% rename from keyboards/kprepublic/bm65iso/keymaps/via/readme.md rename to keyboards/kprepublic/bm65hsrgb_iso/keymaps/via/readme.md diff --git a/keyboards/kprepublic/bm65iso/keymaps/via/rules.mk b/keyboards/kprepublic/bm65hsrgb_iso/keymaps/via/rules.mk similarity index 100% rename from keyboards/kprepublic/bm65iso/keymaps/via/rules.mk rename to keyboards/kprepublic/bm65hsrgb_iso/keymaps/via/rules.mk diff --git a/keyboards/kprepublic/bm65iso/readme.md b/keyboards/kprepublic/bm65hsrgb_iso/readme.md similarity index 80% rename from keyboards/kprepublic/bm65iso/readme.md rename to keyboards/kprepublic/bm65hsrgb_iso/readme.md index 466a0341a2..752362e29a 100644 --- a/keyboards/kprepublic/bm65iso/readme.md +++ b/keyboards/kprepublic/bm65hsrgb_iso/readme.md @@ -1,20 +1,20 @@ -# bm65iso +# BM65HSRGB_ISO -![bm65iso](https://ae01.alicdn.com/kf/He2fd118856c7490292bc3c299049fdbcp.jpg) +![BM65HSRGB_ISO](https://ae01.alicdn.com/kf/He2fd118856c7490292bc3c299049fdbcp.jpg) A 65% hotswap in switch RGB keyboard from KPRepublic. * Keyboard Maintainer: [deadolus](https://github.com/deadolus) -* Hardware Supported: BM65 ISO +* Hardware Supported: BM65HSRGB_ISO * Hardware Availability: [KP Republic](https://kprepublic.com/products/bm65rgb-bm65-iso-rgb-65-hot-swappable-custom-mechanical-keyboard-pcb-programmed-qmk-via-firmware-rgb-switch-underglow-type-c) Make example for this keyboard (after setting up your build environment): - make kprepublic/bm65iso:default + make kprepublic/bm65hsrgb_iso:default Flashing example for this keyboard: - make kprepublic/bm65iso:default:flash + make kprepublic/bm65hsrgb_iso:default:flash To reset the board into bootloader mode, do one of the following: diff --git a/keyboards/kprepublic/bm65iso/rules.mk b/keyboards/kprepublic/bm65hsrgb_iso/rules.mk similarity index 100% rename from keyboards/kprepublic/bm65iso/rules.mk rename to keyboards/kprepublic/bm65hsrgb_iso/rules.mk diff --git a/keyboards/kprepublic/bm68rgb/bm68rgb.c b/keyboards/kprepublic/bm68hsrgb/bm68hsrgb.c similarity index 99% rename from keyboards/kprepublic/bm68rgb/bm68rgb.c rename to keyboards/kprepublic/bm68hsrgb/bm68hsrgb.c index f3d2cc7b4f..b405a9f204 100644 --- a/keyboards/kprepublic/bm68rgb/bm68rgb.c +++ b/keyboards/kprepublic/bm68hsrgb/bm68hsrgb.c @@ -14,7 +14,7 @@ * along with this program. If not, see . */ -#include "bm68rgb.h" +#include "bm68hsrgb.h" #ifdef RGB_MATRIX_ENABLE led_config_t g_led_config = { { diff --git a/keyboards/kprepublic/bm68rgb/bm68rgb.h b/keyboards/kprepublic/bm68hsrgb/bm68hsrgb.h similarity index 100% rename from keyboards/kprepublic/bm68rgb/bm68rgb.h rename to keyboards/kprepublic/bm68hsrgb/bm68hsrgb.h diff --git a/keyboards/kprepublic/bm68rgb/config.h b/keyboards/kprepublic/bm68hsrgb/config.h similarity index 99% rename from keyboards/kprepublic/bm68rgb/config.h rename to keyboards/kprepublic/bm68hsrgb/config.h index 580af57cf5..a779c97b7b 100644 --- a/keyboards/kprepublic/bm68rgb/config.h +++ b/keyboards/kprepublic/bm68hsrgb/config.h @@ -24,7 +24,7 @@ along with this program. If not, see . #define PRODUCT_ID 0xEF6F #define DEVICE_VER 0x0001 #define MANUFACTURER KPRepublic -#define PRODUCT BM68 RGB +#define PRODUCT BM68HSRGB /* key matrix size */ #define MATRIX_ROWS 5 diff --git a/keyboards/kprepublic/bm68rgb/info.json b/keyboards/kprepublic/bm68hsrgb/info.json similarity index 99% rename from keyboards/kprepublic/bm68rgb/info.json rename to keyboards/kprepublic/bm68hsrgb/info.json index aa71c895ec..0a72da6e98 100644 --- a/keyboards/kprepublic/bm68rgb/info.json +++ b/keyboards/kprepublic/bm68hsrgb/info.json @@ -1,5 +1,5 @@ { - "keyboard_name": "bm68rgb", + "keyboard_name": "BM68HSRGB", "url": "", "maintainer": "peepeetee", "layouts": { diff --git a/keyboards/kprepublic/bm68rgb/keymaps/default/keymap.c b/keyboards/kprepublic/bm68hsrgb/keymaps/default/keymap.c similarity index 100% rename from keyboards/kprepublic/bm68rgb/keymaps/default/keymap.c rename to keyboards/kprepublic/bm68hsrgb/keymaps/default/keymap.c diff --git a/keyboards/kprepublic/bm68rgb/keymaps/default/readme.md b/keyboards/kprepublic/bm68hsrgb/keymaps/default/readme.md similarity index 100% rename from keyboards/kprepublic/bm68rgb/keymaps/default/readme.md rename to keyboards/kprepublic/bm68hsrgb/keymaps/default/readme.md diff --git a/keyboards/kprepublic/bm68rgb/keymaps/peepeetee/config.h b/keyboards/kprepublic/bm68hsrgb/keymaps/peepeetee/config.h similarity index 100% rename from keyboards/kprepublic/bm68rgb/keymaps/peepeetee/config.h rename to keyboards/kprepublic/bm68hsrgb/keymaps/peepeetee/config.h diff --git a/keyboards/kprepublic/bm68rgb/keymaps/peepeetee/keymap.c b/keyboards/kprepublic/bm68hsrgb/keymaps/peepeetee/keymap.c similarity index 100% rename from keyboards/kprepublic/bm68rgb/keymaps/peepeetee/keymap.c rename to keyboards/kprepublic/bm68hsrgb/keymaps/peepeetee/keymap.c diff --git a/keyboards/kprepublic/bm68rgb/keymaps/peepeetee/keymap.h b/keyboards/kprepublic/bm68hsrgb/keymaps/peepeetee/keymap.h similarity index 100% rename from keyboards/kprepublic/bm68rgb/keymaps/peepeetee/keymap.h rename to keyboards/kprepublic/bm68hsrgb/keymaps/peepeetee/keymap.h diff --git a/keyboards/kprepublic/bm68rgb/keymaps/peepeetee/readme.md b/keyboards/kprepublic/bm68hsrgb/keymaps/peepeetee/readme.md similarity index 100% rename from keyboards/kprepublic/bm68rgb/keymaps/peepeetee/readme.md rename to keyboards/kprepublic/bm68hsrgb/keymaps/peepeetee/readme.md diff --git a/keyboards/kprepublic/bm68rgb/keymaps/via/keymap.c b/keyboards/kprepublic/bm68hsrgb/keymaps/via/keymap.c similarity index 100% rename from keyboards/kprepublic/bm68rgb/keymaps/via/keymap.c rename to keyboards/kprepublic/bm68hsrgb/keymaps/via/keymap.c diff --git a/keyboards/kprepublic/bm68rgb/keymaps/via/readme.md b/keyboards/kprepublic/bm68hsrgb/keymaps/via/readme.md similarity index 100% rename from keyboards/kprepublic/bm68rgb/keymaps/via/readme.md rename to keyboards/kprepublic/bm68hsrgb/keymaps/via/readme.md diff --git a/keyboards/kprepublic/bm68rgb/keymaps/via/rules.mk b/keyboards/kprepublic/bm68hsrgb/keymaps/via/rules.mk similarity index 100% rename from keyboards/kprepublic/bm68rgb/keymaps/via/rules.mk rename to keyboards/kprepublic/bm68hsrgb/keymaps/via/rules.mk diff --git a/keyboards/kprepublic/bm68rgb/readme.md b/keyboards/kprepublic/bm68hsrgb/readme.md similarity index 84% rename from keyboards/kprepublic/bm68rgb/readme.md rename to keyboards/kprepublic/bm68hsrgb/readme.md index f09efb1ab6..54d71cab2c 100644 --- a/keyboards/kprepublic/bm68rgb/readme.md +++ b/keyboards/kprepublic/bm68hsrgb/readme.md @@ -1,20 +1,20 @@ -# bm68rgb +# BM68HSRGB -![bm68rgb](https://i.imgur.com/uuYP8OIl.jpeg) +![BM68HSRGB](https://i.imgur.com/uuYP8OIl.jpeg) A 65% hotswap in switch RGB keyboard from KPRepublic. * Keyboard Maintainer: [peepeetee](https://github.com/peepeetee) -* Hardware Supported: BM68 RGB +* Hardware Supported: BM68HSRGB * Hardware Availability: [KP Republic](https://kprepublic.com/products/bm68rgb-bm68-rgb-65-hot-swappable-custom-mechanical-keyboard-pcb-programmed-qmk-via-firmware-full-rgb-switch-underglow-type-c) Make example for this keyboard (after setting up your build environment): - make kprepublic/bm68rgb:default + make kprepublic/bm68hsrgb:default Flashing example for this keyboard: - make kprepublic/bm68rgb:default:flash + make kprepublic/bm68hsrgb:default:flash To reset the board into bootloader mode, do one of the following: diff --git a/keyboards/kprepublic/bm68rgb/rules.mk b/keyboards/kprepublic/bm68hsrgb/rules.mk similarity index 100% rename from keyboards/kprepublic/bm68rgb/rules.mk rename to keyboards/kprepublic/bm68hsrgb/rules.mk diff --git a/keyboards/kprepublic/bm80/bm80.c b/keyboards/kprepublic/bm80hsrgb/bm80hsrgb.c similarity index 97% rename from keyboards/kprepublic/bm80/bm80.c rename to keyboards/kprepublic/bm80hsrgb/bm80hsrgb.c index 8a0d26e87d..3455efd84c 100644 --- a/keyboards/kprepublic/bm80/bm80.c +++ b/keyboards/kprepublic/bm80hsrgb/bm80hsrgb.c @@ -14,7 +14,7 @@ * along with this program. If not, see . */ -#include "bm80.h" +#include "bm80hsrgb.h" #ifdef RGB_MATRIX_ENABLE led_config_t g_led_config = { { @@ -27,12 +27,12 @@ led_config_t g_led_config = { { { 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, NO_LED, 74, NO_LED, NO_LED, 75, NO_LED }, { 76, 77, 78, NO_LED, NO_LED, 79, NO_LED, NO_LED, NO_LED, 80, 81, 82, 83, 84, NO_LED, 85, 86 } -// K0_0, K0_2, K0_3, K0_4, K0_5, K0_7, K0_8, K0_9, K0_A, K0_B, K0_C, K3_C, K0_D, K0_E, K0_F, K0_10, -// K1_0, K1_1, K1_2, K1_3, K1_4, K1_5, K1_6, K1_7, K1_8, K1_9, K1_A, K1_B, K1_C, K1_D, K1_E, K1_F, K1_10, -// K2_0, K2_1, K2_2, K2_3, K2_4, K2_5, K2_6, K2_7, K2_8, K2_9, K2_A, K2_B, K2_C, K2_D, K2_E, K2_F, K2_10, -// K3_0, K3_1, K3_2, K3_3, K3_4, K3_5, K3_6, K3_7, K3_8, K3_9, K3_A, K3_B, K3_D, -// K4_0, K4_1, K4_2, K4_3, K4_4, K4_5, K4_6, K4_7, K4_8, K4_9, K4_A, K4_C, K4_F, -// K5_0, K5_1, K5_2, K5_5, K5_9, K5_A, K5_B, K5_C, K5_D, K5_F, K5_10 +// K0_0, K0_2, K0_3, K0_4, K0_5, K0_7, K0_8, K0_9, K0_A, K0_B, K0_C, K3_C, K0_D, K0_E, K0_F, K0_10, +// K1_0, K1_1, K1_2, K1_3, K1_4, K1_5, K1_6, K1_7, K1_8, K1_9, K1_A, K1_B, K1_C, K1_D, K1_E, K1_F, K1_10, +// K2_0, K2_1, K2_2, K2_3, K2_4, K2_5, K2_6, K2_7, K2_8, K2_9, K2_A, K2_B, K2_C, K2_D, K2_E, K2_F, K2_10, +// K3_0, K3_1, K3_2, K3_3, K3_4, K3_5, K3_6, K3_7, K3_8, K3_9, K3_A, K3_B, K3_D, +// K4_0, K4_1, K4_2, K4_3, K4_4, K4_5, K4_6, K4_7, K4_8, K4_9, K4_A, K4_C, K4_F, +// K5_0, K5_1, K5_2, K5_5, K5_9, K5_A, K5_B, K5_C, K5_D, K5_F, K5_10 // K0_0, KC_NO, K0_2, K0_3, K0_4, K0_5, KC_NO, K0_7, K0_8, K0_9, K0_A, K0_B, K0_C, K0_D, K0_E, K0_F, K0_10 @@ -130,7 +130,7 @@ led_config_t g_led_config = { { * │ 63   │ 64│ 65│ 66│ 67│ 68│ 69│ 70│ 71│ 72│ 73│    74  │     │ 75│ * └────────┴───┴───┴───┴───┴───┴───┴───┴───┴───┴───┴──────────┘  └───┘ */ - 1, 1, 1, 4, 1, 1, 1, 1, 1, 1, 1 + 1, 1, 1, 4, 1, 1, 1, 1, 1, 1, 1 /* * ┌────┬────┬────┬────────────────────────┬────┬────┬────┬────┐ ┌───┬───┬───┐ * │ 76 │ 77 │ 78 │           79           │ 80 │ 81 │ 82 │ 83 │ │ 84│ 85│ 86│ diff --git a/keyboards/kprepublic/bm80/bm80.h b/keyboards/kprepublic/bm80hsrgb/bm80hsrgb.h similarity index 100% rename from keyboards/kprepublic/bm80/bm80.h rename to keyboards/kprepublic/bm80hsrgb/bm80hsrgb.h diff --git a/keyboards/kprepublic/bm80/config.h b/keyboards/kprepublic/bm80hsrgb/config.h similarity index 100% rename from keyboards/kprepublic/bm80/config.h rename to keyboards/kprepublic/bm80hsrgb/config.h diff --git a/keyboards/kprepublic/bm80/info.json b/keyboards/kprepublic/bm80hsrgb/info.json similarity index 99% rename from keyboards/kprepublic/bm80/info.json rename to keyboards/kprepublic/bm80hsrgb/info.json index 8c7a0056b3..f46024a93f 100644 --- a/keyboards/kprepublic/bm80/info.json +++ b/keyboards/kprepublic/bm80hsrgb/info.json @@ -1,5 +1,5 @@ { - "keyboard_name": "bm80", + "keyboard_name": "BM80HSRGB", "url": "", "maintainer": "peepeetee", "layouts": { @@ -95,4 +95,4 @@ ] } } -} \ No newline at end of file +} diff --git a/keyboards/kprepublic/bm80/keymaps/default/keymap.c b/keyboards/kprepublic/bm80hsrgb/keymaps/default/keymap.c similarity index 100% rename from keyboards/kprepublic/bm80/keymaps/default/keymap.c rename to keyboards/kprepublic/bm80hsrgb/keymaps/default/keymap.c diff --git a/keyboards/kprepublic/bm80/keymaps/default/readme.md b/keyboards/kprepublic/bm80hsrgb/keymaps/default/readme.md similarity index 100% rename from keyboards/kprepublic/bm80/keymaps/default/readme.md rename to keyboards/kprepublic/bm80hsrgb/keymaps/default/readme.md diff --git a/keyboards/kprepublic/bm80/keymaps/peepeetee/config.h b/keyboards/kprepublic/bm80hsrgb/keymaps/peepeetee/config.h similarity index 100% rename from keyboards/kprepublic/bm80/keymaps/peepeetee/config.h rename to keyboards/kprepublic/bm80hsrgb/keymaps/peepeetee/config.h diff --git a/keyboards/kprepublic/bm80/keymaps/peepeetee/keymap.c b/keyboards/kprepublic/bm80hsrgb/keymaps/peepeetee/keymap.c similarity index 100% rename from keyboards/kprepublic/bm80/keymaps/peepeetee/keymap.c rename to keyboards/kprepublic/bm80hsrgb/keymaps/peepeetee/keymap.c diff --git a/keyboards/kprepublic/bm80/keymaps/via/keymap.c b/keyboards/kprepublic/bm80hsrgb/keymaps/via/keymap.c similarity index 100% rename from keyboards/kprepublic/bm80/keymaps/via/keymap.c rename to keyboards/kprepublic/bm80hsrgb/keymaps/via/keymap.c diff --git a/keyboards/kprepublic/bm80/keymaps/via/readme.md b/keyboards/kprepublic/bm80hsrgb/keymaps/via/readme.md similarity index 100% rename from keyboards/kprepublic/bm80/keymaps/via/readme.md rename to keyboards/kprepublic/bm80hsrgb/keymaps/via/readme.md diff --git a/keyboards/kprepublic/bm80/keymaps/via/rules.mk b/keyboards/kprepublic/bm80hsrgb/keymaps/via/rules.mk similarity index 100% rename from keyboards/kprepublic/bm80/keymaps/via/rules.mk rename to keyboards/kprepublic/bm80hsrgb/keymaps/via/rules.mk diff --git a/keyboards/kprepublic/bm80/readme.md b/keyboards/kprepublic/bm80hsrgb/readme.md similarity index 88% rename from keyboards/kprepublic/bm80/readme.md rename to keyboards/kprepublic/bm80hsrgb/readme.md index a0d8e8cf9a..f48af7390c 100644 --- a/keyboards/kprepublic/bm80/readme.md +++ b/keyboards/kprepublic/bm80hsrgb/readme.md @@ -1,20 +1,20 @@ -# bm80 +# BM80HSRGB -![bm80](https://i.imgur.com/AqjEjOi.jpeg) +![BM80HSRGB](https://i.imgur.com/AqjEjOi.jpeg) A tkl, hotswap, in switch RGB keyboard from KPRepublic. * Keyboard Maintainer: [peepeetee](https://github.com/peepeetee) -* Hardware Supported: BM80 +* Hardware Supported: BM80HSRGB * Hardware Availability: [KP Republic](https://kprepublic.com/collections/new-arrival/products/bm80rgb-bm80-rgb-80-hot-swappable-custom-mechanical-keyboard-pcb-programmed-qmk-via-firmware-full-rgb-switch-underglow-type-c) Make example for this keyboard (after setting up your build environment): - make kprepublic/bm80:default + make kprepublic/bm80hsrgb:default Flashing example for this keyboard: - make kprepublic/bm80:default:flash + make kprepublic/bm80hsrgb:default:flash To reset the board into bootloader mode, do one of the following: diff --git a/keyboards/kprepublic/bm80/rules.mk b/keyboards/kprepublic/bm80hsrgb/rules.mk similarity index 100% rename from keyboards/kprepublic/bm80/rules.mk rename to keyboards/kprepublic/bm80hsrgb/rules.mk diff --git a/keyboards/kprepublic/jj40/keymaps/cockpit/readme.md b/keyboards/kprepublic/jj40/keymaps/cockpit/readme.md index 766a3c93b2..340c6924ee 100644 --- a/keyboards/kprepublic/jj40/keymaps/cockpit/readme.md +++ b/keyboards/kprepublic/jj40/keymaps/cockpit/readme.md @@ -48,8 +48,8 @@ ```bash cd qmk_firmware -make jj40:cockpit -bootloadHID .build/jj40_cockpit.hex +make kprepublic/jj40:cockpit +bootloadHID .build/kprepublic_jj40_cockpit.hex ``` _if you're getting permission errors use sudo_ diff --git a/keyboards/kprepublic/jj40/keymaps/waples/readme.md b/keyboards/kprepublic/jj40/keymaps/waples/readme.md index 91b1094e57..e9382d89f8 100644 --- a/keyboards/kprepublic/jj40/keymaps/waples/readme.md +++ b/keyboards/kprepublic/jj40/keymaps/waples/readme.md @@ -11,7 +11,7 @@ I currently have the following layers in my keymap: * Dual (adjust) ### Note to self: -YOU NEED TO USE [bootloadHID -r jj40_waples.hex](https://github.com/qmk/qmk_firmware/tree/master/keyboards/jj40) +YOU NEED TO USE [bootloadHID -r kprepublic_jj40_waples.hex](https://github.com/qmk/qmk_firmware/tree/master/keyboards/jj40) ## the stuff below is out of date and I think about removing them from this readme diff --git a/keyboards/ktec/ergodone/readme.md b/keyboards/ktec/ergodone/readme.md index 7998a274f0..c06222b286 100644 --- a/keyboards/ktec/ergodone/readme.md +++ b/keyboards/ktec/ergodone/readme.md @@ -25,4 +25,4 @@ The ErgoDone uses a customized HID bootloader rather than the Teensy one. It doe ![Ergodone Flash Mode](https://i.imgur.com/sNivAnr.jpg) 2. To flash the .hex file, use the `hid_bootloader_cli` utlity from the [TKG Toolkit](https://github.com/kairyu/tkg-toolkit) (as of 2017-10-03, only [this old version](https://github.com/kairyu/tkg-toolkit/blob/b14c67ca8bc84c07e5fc6b2e01ae4002b808243a/windows/bin/hid_bootloader_cli.exe) works under Windows): - hid_bootloader_cli -mmcu=atmega32u4 ergodone_default.hex + hid_bootloader_cli -mmcu=atmega32u4 ktec_ergodone_default.hex diff --git a/keyboards/xiudi/xd002/readme.md b/keyboards/xiudi/xd002/readme.md index 65522fda2c..395a540709 100644 --- a/keyboards/xiudi/xd002/readme.md +++ b/keyboards/xiudi/xd002/readme.md @@ -37,7 +37,7 @@ sudo udevadm trigger **Reset Key**: Hold down key nearest to the USB socket while plugging in the keyboard. ```bash -make xd002:default:flash +make xiudi/xd002:default:flash # or directly with... micronucleus --run diff --git a/keyboards/xiudi/xd004/keymaps/system_and_media/readme.md b/keyboards/xiudi/xd004/keymaps/system_and_media/readme.md index d684d463c6..3e5533b036 100644 --- a/keyboards/xiudi/xd004/keymaps/system_and_media/readme.md +++ b/keyboards/xiudi/xd004/keymaps/system_and_media/readme.md @@ -6,4 +6,4 @@ It also has a 'Super Alt-F4' key for Windows that, when tapped does Alt-F4, unle ## Build -To build the keymap, simply run `make xd004:system_and_media`. +To build the keymap, simply run `make xiudi/xd004:system_and_media`. diff --git a/keyboards/xiudi/xd60/keymaps/Jos/README.md b/keyboards/xiudi/xd60/keymaps/Jos/README.md index b4382acfeb..c93ea25bfd 100644 --- a/keyboards/xiudi/xd60/keymaps/Jos/README.md +++ b/keyboards/xiudi/xd60/keymaps/Jos/README.md @@ -19,4 +19,4 @@ There are a few `#define` lines at the beginning of the keymap file that enable # Build -To build, simply run `make xd60:Jos` +To build, simply run `make xiudi/xd60:Jos` diff --git a/keyboards/xiudi/xd60/keymaps/birkir/readme.md b/keyboards/xiudi/xd60/keymaps/birkir/readme.md index 670b6bb314..47a1523f6c 100644 --- a/keyboards/xiudi/xd60/keymaps/birkir/readme.md +++ b/keyboards/xiudi/xd60/keymaps/birkir/readme.md @@ -42,4 +42,4 @@ RGB settings are persisted for layer 0 when done. - More dynamic keyboard configuration on Layer 2 ## Build -To build the default keymap, simply run `make xd60:birkir`. +To build the default keymap, simply run `make xiudi/xd60:birkir`. diff --git a/keyboards/xiudi/xd60/keymaps/default/readme.md b/keyboards/xiudi/xd60/keymaps/default/readme.md index 7d6bc75365..517dfef633 100644 --- a/keyboards/xiudi/xd60/keymaps/default/readme.md +++ b/keyboards/xiudi/xd60/keymaps/default/readme.md @@ -9,5 +9,5 @@ Default Keymap for XD60 as indicated on the original sale page. To build the default keymap, simply run: - make xd60/rev2:default # XD60 rev2 - make xd60/rev3:default # XD60 rev3 + make xiudi/xd60/rev2:default # XD60 rev2 + make xiudi/xd60/rev3:default # XD60 rev3 diff --git a/keyboards/xiudi/xd60/keymaps/edulpn/readme.md b/keyboards/xiudi/xd60/keymaps/edulpn/readme.md index 14f7da063d..ba37eb6d7e 100644 --- a/keyboards/xiudi/xd60/keymaps/edulpn/readme.md +++ b/keyboards/xiudi/xd60/keymaps/edulpn/readme.md @@ -6,4 +6,4 @@ ![Edulpn Keymap for the XD60 PCB](https://i.imgur.com/PoL5qcr.png) ## Build -To build the default keymap, simply run `make xd60:edulpn`. +To build the default keymap, simply run `make xiudi/xd60:edulpn`. diff --git a/keyboards/xiudi/xd60/keymaps/edulpn64/readme.md b/keyboards/xiudi/xd60/keymaps/edulpn64/readme.md index a3208564a0..0fd6e82752 100644 --- a/keyboards/xiudi/xd60/keymaps/edulpn64/readme.md +++ b/keyboards/xiudi/xd60/keymaps/edulpn64/readme.md @@ -6,4 +6,4 @@ This keymap uses the Default XD60 base layer, but follows the GK64 function layer (one of my XD60 boards use GK64 keycaps). ## Build -To build the default keymap, simply run `make xd60:edulpn64`. +To build the default keymap, simply run `make xiudi/xd60:edulpn64`. diff --git a/keyboards/xiudi/xd60/keymaps/fvolpe83/readme.md b/keyboards/xiudi/xd60/keymaps/fvolpe83/readme.md index 753c6bbb2d..63e507935d 100755 --- a/keyboards/xiudi/xd60/keymaps/fvolpe83/readme.md +++ b/keyboards/xiudi/xd60/keymaps/fvolpe83/readme.md @@ -27,7 +27,7 @@ via has been enabled To build the keymap, simply run: - make xd60/rev3:fvolpe83 # XD60 rev3 + make xiudi/xd60/rev3:fvolpe83 # XD60 rev3 ![Keyboard Layout (Physical appearence)](https://i.imgur.com/CSRPjbX.png "physical layout") diff --git a/keyboards/xiudi/xd60/keymaps/iso/readme.md b/keyboards/xiudi/xd60/keymaps/iso/readme.md index 84374fa185..40f24c5c40 100644 --- a/keyboards/xiudi/xd60/keymaps/iso/readme.md +++ b/keyboards/xiudi/xd60/keymaps/iso/readme.md @@ -16,5 +16,5 @@ iso Keymap for XD60. To build the default keymap, simply run: - make xd60/rev2:iso # XD60 rev2 - make xd60/rev3:iso # XD60 rev3 + make xiudi/xd60/rev2:iso # XD60 rev2 + make xiudi/xd60/rev3:iso # XD60 rev3 diff --git a/keyboards/xiudi/xd60/keymaps/kmontag42/readme.md b/keyboards/xiudi/xd60/keymaps/kmontag42/readme.md index a23f6a8bec..fcbf2099c8 100644 --- a/keyboards/xiudi/xd60/keymaps/kmontag42/readme.md +++ b/keyboards/xiudi/xd60/keymaps/kmontag42/readme.md @@ -15,4 +15,4 @@ This layout is WIP for me as I use my shiny new keyboard more and more. I will * I use emacs, which could account for some of the oddities in my layout and macros ## Build -To build the default keymap, simply run `make xd60:kmontag42`. +To build the default keymap, simply run `make xiudi/xd60:kmontag42`. diff --git a/keyboards/xiudi/xd60/keymaps/krusli/readme.md b/keyboards/xiudi/xd60/keymaps/krusli/readme.md index 34f46e026c..c6d6834e6a 100644 --- a/keyboards/xiudi/xd60/keymaps/krusli/readme.md +++ b/keyboards/xiudi/xd60/keymaps/krusli/readme.md @@ -4,4 +4,4 @@ Keymap for the XD60 (ANSI) with 2.25u left shift, split right shift. HHKB-like function layer. ## Build -To build this keymap, simply run `make xd60:krusli` on the top-level directory for QMK. +To build this keymap, simply run `make xiudi/xd60:krusli` on the top-level directory for QMK. diff --git a/keyboards/xiudi/xd60/keymaps/melka/readme.md b/keyboards/xiudi/xd60/keymaps/melka/readme.md index b9d9065da7..23e7ab0b09 100644 --- a/keyboards/xiudi/xd60/keymaps/melka/readme.md +++ b/keyboards/xiudi/xd60/keymaps/melka/readme.md @@ -18,4 +18,4 @@ To define your password, rename passwd_template.h file to passwd.h and edit the To build this keymap, simply run: - make xd60/rev3:melka # XD60 rev3 + make xiudi/xd60/rev3:melka # XD60 rev3 diff --git a/keyboards/xiudi/xd60/keymaps/petesmom/README.md b/keyboards/xiudi/xd60/keymaps/petesmom/README.md index dceb402d72..075928205c 100644 --- a/keyboards/xiudi/xd60/keymaps/petesmom/README.md +++ b/keyboards/xiudi/xd60/keymaps/petesmom/README.md @@ -4,10 +4,10 @@ Customized xd60 keymap based on yuuki's but a step sideways with Mac support. Fo ## Programming Instructions -Change the layout in `keymap.c` then run `make xd60-petesmom`. The compiled file will be located in `.build/xd60_petesmom.hex` relative to the project root. To flash it onto your keyboard, use whatever program works on your OS. I personally use `dfu-programmer`, and run: +Change the layout in `keymap.c` then run `make xiudi/xd60:petesmom`. The compiled file will be located in `.build/xiudi_xd60_petesmom.hex` relative to the project root. To flash it onto your keyboard, use whatever program works on your OS. I personally use `dfu-programmer`, and run: * `sudo dfu-programmer atmega32u4 erase` -* `sudo dfu-programmer atmega32u4 flash .build/xd60-petesmom.hex` +* `sudo dfu-programmer atmega32u4 flash .build/xiudi_xd60-petesmom.hex` * `sudo dfu-programmer atmega32u4 start` ## Layout diff --git a/keyboards/xiudi/xd60/keymaps/semicolonsnet/readme.md b/keyboards/xiudi/xd60/keymaps/semicolonsnet/readme.md index b8a3ac4fff..7e74f753ff 100644 --- a/keyboards/xiudi/xd60/keymaps/semicolonsnet/readme.md +++ b/keyboards/xiudi/xd60/keymaps/semicolonsnet/readme.md @@ -9,5 +9,5 @@ Custom Keymap for XD60 - uses a META key and lots of shortcut keys that are late To build the default keymap, simply run: - make xd60/rev2:default # XD60 rev2 - make xd60/rev3:default # XD60 rev3 \ No newline at end of file + make xiudi/xd60/rev2:default # XD60 rev2 + make xiudi/xd60/rev3:default # XD60 rev3 \ No newline at end of file diff --git a/keyboards/xiudi/xd60/keymaps/styr/readme.md b/keyboards/xiudi/xd60/keymaps/styr/readme.md index 8d9edf7c48..1c5d160cfa 100644 --- a/keyboards/xiudi/xd60/keymaps/styr/readme.md +++ b/keyboards/xiudi/xd60/keymaps/styr/readme.md @@ -4,4 +4,4 @@ Default Keymap for XD60 as indicated on the original sale page. ## Build -To build the default keymap, simply run `make xd60/rev3:styr`. +To build the default keymap, simply run `make xiudi/xd60/rev3:styr`. diff --git a/keyboards/xiudi/xd60/keymaps/supercoffee/readme.md b/keyboards/xiudi/xd60/keymaps/supercoffee/readme.md index ccfdca8b25..111f34e720 100644 --- a/keyboards/xiudi/xd60/keymaps/supercoffee/readme.md +++ b/keyboards/xiudi/xd60/keymaps/supercoffee/readme.md @@ -6,4 +6,4 @@ 60% Keymap for XD60 with GH60 ANSI layout. Arrow keys mapped to WASD in function layer. ## Build -To build the default keymap, simply run `make xd60:supercoffee`. +To build the default keymap, simply run `make xiudi/xd60:supercoffee`. diff --git a/keyboards/xiudi/xd60/keymaps/yuuki/README.md b/keyboards/xiudi/xd60/keymaps/yuuki/README.md index ebb2f8c1c9..ba0de049ee 100644 --- a/keyboards/xiudi/xd60/keymaps/yuuki/README.md +++ b/keyboards/xiudi/xd60/keymaps/yuuki/README.md @@ -4,11 +4,11 @@ Customized xd60 keymap with inspirations from HHKB and the layout I used on my V ## Programming Instructions -Change the layout in `keymap.c` then run `make xd60:yuuki`. The compiled file will be located in `.build/xd60_yuuki.hex` relative to the project root. To flash it onto your keyboard, use whatever program works on your OS. I personally use `dfu-programmer`, and run: +Change the layout in `keymap.c` then run `make xiudi/xd60:yuuki`. The compiled file will be located in `.build/xiudi_xd60_yuuki.hex` relative to the project root. To flash it onto your keyboard, use whatever program works on your OS. I personally use `dfu-programmer`, and run: * reset keyboard by pressing the reset button on the back of the PCB * `sudo dfu-programmer atmega32u4 erase` -* `sudo dfu-programmer atmega32u4 flash .build/xd60_yuuki.hex` +* `sudo dfu-programmer atmega32u4 flash .build/xiudi_xd60_yuuki.hex` * `sudo dfu-programmer atmega32u4 start` ## Layout diff --git a/keyboards/xiudi/xd68/keymaps/default/readme.md b/keyboards/xiudi/xd68/keymaps/default/readme.md index f26e1bd63f..7f5c5c39ea 100644 --- a/keyboards/xiudi/xd68/keymaps/default/readme.md +++ b/keyboards/xiudi/xd68/keymaps/default/readme.md @@ -1,5 +1,5 @@ # XD68 layout for Default ANSI ``` -make xd68:default +make xiudi/xd68:default ``` diff --git a/keyboards/xiudi/xd68/keymaps/default_iso/readme.md b/keyboards/xiudi/xd68/keymaps/default_iso/readme.md index d61877e77e..a91aff3992 100644 --- a/keyboards/xiudi/xd68/keymaps/default_iso/readme.md +++ b/keyboards/xiudi/xd68/keymaps/default_iso/readme.md @@ -1,5 +1,5 @@ # XD68 layout for Default ISO ``` -make xd68:default_iso +make xiudi/xd68:default_iso ``` diff --git a/keyboards/xiudi/xd75/keymaps/bbaserdem/readme.md b/keyboards/xiudi/xd75/keymaps/bbaserdem/readme.md index f96c8ea976..a0ade691aa 100644 --- a/keyboards/xiudi/xd75/keymaps/bbaserdem/readme.md +++ b/keyboards/xiudi/xd75/keymaps/bbaserdem/readme.md @@ -9,6 +9,6 @@ Take the board into reset mode, then ``` -make xd75:bbaserdem:dfu +make xiudi/xd75:bbaserdem:dfu ``` Either sudo it or set permissions in udev. diff --git a/keyboards/xiudi/xd75/keymaps/buzzlighter1/readme.md b/keyboards/xiudi/xd75/keymaps/buzzlighter1/readme.md index 947acca101..17232175e3 100644 --- a/keyboards/xiudi/xd75/keymaps/buzzlighter1/readme.md +++ b/keyboards/xiudi/xd75/keymaps/buzzlighter1/readme.md @@ -50,5 +50,5 @@ $ cd qmk_firmware build ``` -$ make xd75:buzzlighter1 +$ make xiudi/xd75:buzzlighter1 ``` \ No newline at end of file diff --git a/keyboards/xiudi/xd75/keymaps/clanghans/readme.md b/keyboards/xiudi/xd75/keymaps/clanghans/readme.md index bce20f6133..eed6369ada 100755 --- a/keyboards/xiudi/xd75/keymaps/clanghans/readme.md +++ b/keyboards/xiudi/xd75/keymaps/clanghans/readme.md @@ -5,7 +5,7 @@ * Build/Flash qmk setup - qmk compile -kb xd75 -km clanghans - qmk flash -kb xd75 -km clanghans + qmk compile -kb xiudi/xd75 -km clanghans + qmk flash -kb xiudi/xd75 -km clanghans Hit 'Raise'+'PgUp' for entering bootloader mode diff --git a/keyboards/xiudi/xd75/keymaps/colinta/readme.md b/keyboards/xiudi/xd75/keymaps/colinta/readme.md index e3f59d681f..e4e8049015 100644 --- a/keyboards/xiudi/xd75/keymaps/colinta/readme.md +++ b/keyboards/xiudi/xd75/keymaps/colinta/readme.md @@ -1,7 +1,7 @@ # colinta's keymap for XD75 ``` -make xd75:colinta:dfu +make xiudi/xd75:colinta:dfu ``` The default layout is a Colemak keyboard with "one-shot" keys assigned to the modifier keys. @@ -41,13 +41,13 @@ If you would *also* like to take advantage of this feature, you'll first want to # exclude patterns (uncomment them if you want to use them): # *.[oa] # *~ -/keyboards/xd75/keymaps/colinta/secrets.h +/keyboards/xiudi/xd75/keymaps/colinta/secrets.h ``` Then you can create this file and add your macro strings to it: ``` -$EDITOR keyboards/xd75/keymaps/colinta/secrets.h +$EDITOR keyboards/xiudi/xd75/keymaps/colinta/secrets.h ``` ###### secrets.h @@ -60,5 +60,5 @@ $EDITOR keyboards/xd75/keymaps/colinta/secrets.h To include the feature at compile time, include the flag `IS_COLINTA` like so: ``` -make xd75:colinta:dfu EXTRAFLAGS=-DIS_COLINTA +make xiudi/xd75:colinta:dfu EXTRAFLAGS=-DIS_COLINTA ``` diff --git a/keyboards/xiudi/xd75/keymaps/developper_bepo/readme.md b/keyboards/xiudi/xd75/keymaps/developper_bepo/readme.md index 7954a683a0..82172ff981 100644 --- a/keyboards/xiudi/xd75/keymaps/developper_bepo/readme.md +++ b/keyboards/xiudi/xd75/keymaps/developper_bepo/readme.md @@ -10,4 +10,4 @@ Keyboard maintainer: [Quentin Lebastard](https://github.com/lebastaq) Make example for this keyboard (after setting up your build environment): - make xd75:developper_bepo + make xiudi/xd75:developper_bepo diff --git a/keyboards/xiudi/xd75/keymaps/french/readme.md b/keyboards/xiudi/xd75/keymaps/french/readme.md index 8c5330290e..a45bf248da 100644 --- a/keyboards/xiudi/xd75/keymaps/french/readme.md +++ b/keyboards/xiudi/xd75/keymaps/french/readme.md @@ -16,5 +16,5 @@ La touche de fonction permet elle d'avoir accès aux différentes touches multim # Compilation ``` -make xd75:french:dfu +make xiudi/xd75:french:dfu ``` diff --git a/keyboards/xiudi/xd75/keymaps/scheiklp/readme.md b/keyboards/xiudi/xd75/keymaps/scheiklp/readme.md index 58c65f0884..c8c2dc9a2c 100644 --- a/keyboards/xiudi/xd75/keymaps/scheiklp/readme.md +++ b/keyboards/xiudi/xd75/keymaps/scheiklp/readme.md @@ -1,9 +1,9 @@ # KOY Layout for the xd75 pcb board Compile the layout ```bash -qmk compile -kb xd75 -km scheiklp +qmk compile -kb xiudi/xd75 -km scheiklp ``` and flash it to the board ```bash -qmk flash -kb xd75 -km scheiklp +qmk flash -kb xiudi/xd75 -km scheiklp ``` diff --git a/keyboards/xiudi/xd75/keymaps/tdl-jturner/readme.md b/keyboards/xiudi/xd75/keymaps/tdl-jturner/readme.md index 835ef09fb2..a430be0a27 100644 --- a/keyboards/xiudi/xd75/keymaps/tdl-jturner/readme.md +++ b/keyboards/xiudi/xd75/keymaps/tdl-jturner/readme.md @@ -3,7 +3,7 @@ Keyboard Layout Editor: [Link](http://www.keyboard-layout-editor.com/#/gists/b2b23097ef70fd9170e266e4cbc06c02) -Make Command: make xd75:tdl-jturner +Make Command: make xiudi/xd75:tdl-jturner Notes: * Based on Qwerty From b5d24f9efb316351c73763eeac5fcc11b98e0ba1 Mon Sep 17 00:00:00 2001 From: Alexis Jeandeau Date: Thu, 18 Nov 2021 07:30:42 +0900 Subject: [PATCH 515/595] Call steno_set_mode inside eeconfig_init_user in the doc (#15176) --- docs/feature_stenography.md | 4 ++-- docs/ja/feature_stenography.md | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/docs/feature_stenography.md b/docs/feature_stenography.md index 8d66034d4b..d5445b7f8d 100644 --- a/docs/feature_stenography.md +++ b/docs/feature_stenography.md @@ -40,8 +40,8 @@ MOUSEKEY_ENABLE = no In your keymap create a new layer for Plover. You will need to include `keymap_steno.h`. See `planck/keymaps/steno/keymap.c` for an example. Remember to create a key to switch to the layer as well as a key for exiting the layer. If you would like to switch modes on the fly you can use the keycodes `QK_STENO_BOLT` and `QK_STENO_GEMINI`. If you only want to use one of the protocols you may set it up in your initialization function: ```c -void matrix_init_user() { - steno_set_mode(STENO_MODE_GEMINI); // or STENO_MODE_BOLT +void eeconfig_init_user() { + steno_set_mode(STENO_MODE_GEMINI); // or STENO_MODE_BOLT } ``` diff --git a/docs/ja/feature_stenography.md b/docs/ja/feature_stenography.md index 46698bdb3d..f8f7df11e1 100644 --- a/docs/ja/feature_stenography.md +++ b/docs/ja/feature_stenography.md @@ -45,8 +45,8 @@ MOUSEKEY_ENABLE = no キーマップで Plover 用の新しいレイヤーを作成します。`keymap_steno.h` をインクルードする必要があります。例については `planck/keymaps/steno/keymap.c` を見てください。レイヤーに切り替えるためのキーとレイヤーから抜けるためのキーを作成することを忘れないでください。その場でモードを切り替えたい場合は、キーコード `QK_STENO_BOLT` および `QK_STENO_GEMINI` を使うことができます。プロトコルのうちの1つのみを使う場合は、初期化関数の中でそれをセットアップすることができます: ```c -void matrix_init_user() { - steno_set_mode(STENO_MODE_GEMINI); // あるいは STENO_MODE_BOLT +void eeconfig_init_user() { + steno_set_mode(STENO_MODE_GEMINI); // あるいは STENO_MODE_BOLT } ``` From cd50fdf7ee6cdb1a5025f4e3e9540c0fd00499a7 Mon Sep 17 00:00:00 2001 From: Joel Challis Date: Wed, 17 Nov 2021 23:02:45 +0000 Subject: [PATCH 516/595] Add diff logic to python format subcommand (#15156) * Add diff logic to python format subcommand * Update test * Add in filter per format-c * fix tests * Update new workflow --- .github/workflows/format.yaml | 2 +- .github/workflows/format_push.yaml | 2 +- lib/python/qmk/cli/format/python.py | 66 ++++++++++++++++++----- lib/python/qmk/tests/test_cli_commands.py | 4 +- 4 files changed, 58 insertions(+), 16 deletions(-) diff --git a/.github/workflows/format.yaml b/.github/workflows/format.yaml index 9e165e0e8d..645e0ce106 100644 --- a/.github/workflows/format.yaml +++ b/.github/workflows/format.yaml @@ -37,7 +37,7 @@ jobs: shell: 'bash {0}' run: | qmk format-c --core-only $(< ~/files.txt) - qmk format-python + qmk format-python $(< ~/files.txt) qmk format-text $(< ~/files.txt) git diff diff --git a/.github/workflows/format_push.yaml b/.github/workflows/format_push.yaml index 8b579bf86f..b79130f17a 100644 --- a/.github/workflows/format_push.yaml +++ b/.github/workflows/format_push.yaml @@ -25,7 +25,7 @@ jobs: shell: 'bash {0}' run: | qmk format-c -a - qmk format-python + qmk format-python -a qmk format-text -a git diff diff --git a/lib/python/qmk/cli/format/python.py b/lib/python/qmk/cli/format/python.py index 00612f97ec..95868d18a0 100755 --- a/lib/python/qmk/cli/format/python.py +++ b/lib/python/qmk/cli/format/python.py @@ -4,23 +4,65 @@ from subprocess import CalledProcessError, DEVNULL from milc import cli +from qmk.path import normpath -@cli.argument('-n', '--dry-run', arg_only=True, action='store_true', help="Don't actually format.") -@cli.subcommand("Format python code according to QMK's style.", hidden=False if cli.config.user.developer else True) -def format_python(cli): - """Format python code according to QMK's style. - """ +py_file_suffixes = ('py',) +py_dirs = ['lib/python'] + + +def yapf_run(files): edit = '--diff' if cli.args.dry_run else '--in-place' - yapf_cmd = ['yapf', '-vv', '--recursive', edit, 'bin/qmk', 'lib/python'] + yapf_cmd = ['yapf', '-vv', '--recursive', edit, *files] try: cli.run(yapf_cmd, check=True, capture_output=False, stdin=DEVNULL) - cli.log.info('Python code in `bin/qmk` and `lib/python` is correctly formatted.') - return True + cli.log.info('Successfully formatted the python code.') except CalledProcessError: - if cli.args.dry_run: - cli.log.error('Python code in `bin/qmk` and `lib/python` incorrectly formatted!') + cli.log.error(f'Python code in {",".join(py_dirs)} incorrectly formatted!') + return False + + +def filter_files(files): + """Yield only files to be formatted and skip the rest + """ + + for file in files: + if file and file.name.split('.')[-1] in py_file_suffixes: + yield file else: - cli.log.error('Error formatting python code!') + cli.log.debug('Skipping file %s', file) + + +@cli.argument('-n', '--dry-run', arg_only=True, action='store_true', help="Don't actually format.") +@cli.argument('-b', '--base-branch', default='origin/master', help='Branch to compare to diffs to.') +@cli.argument('-a', '--all-files', arg_only=True, action='store_true', help='Format all files.') +@cli.argument('files', nargs='*', arg_only=True, type=normpath, help='Filename(s) to format.') +@cli.subcommand("Format python code according to QMK's style.", hidden=False if cli.config.user.developer else True) +def format_python(cli): + """Format python code according to QMK's style. + """ + # Find the list of files to format + if cli.args.files: + files = list(filter_files(cli.args.files)) + + if not files: + cli.log.error('No Python files in filelist: %s', ', '.join(map(str, cli.args.files))) + exit(0) + + if cli.args.all_files: + cli.log.warning('Filenames passed with -a, only formatting: %s', ','.join(map(str, files))) + + elif cli.args.all_files: + files = py_dirs + + else: + git_diff_cmd = ['git', 'diff', '--name-only', cli.args.base_branch, *py_dirs] + git_diff = cli.run(git_diff_cmd, stdin=DEVNULL) + files = list(filter(None, git_diff.stdout.split('\n'))) + + # Sanity check + if not files: + cli.log.error('No changed files detected. Use "qmk format-python -a" to format all files') + return False - return False + return yapf_run(files) diff --git a/lib/python/qmk/tests/test_cli_commands.py b/lib/python/qmk/tests/test_cli_commands.py index b39fe5e46d..0dad5d5fc4 100644 --- a/lib/python/qmk/tests/test_cli_commands.py +++ b/lib/python/qmk/tests/test_cli_commands.py @@ -81,9 +81,9 @@ def test_hello(): def test_format_python(): - result = check_subcommand('format-python', '--dry-run') + result = check_subcommand('format-python', '-n', '-a') check_returncode(result) - assert 'Python code in `bin/qmk` and `lib/python` is correctly formatted.' in result.stdout + assert 'Successfully formatted the python code.' in result.stdout def test_list_keyboards(): From 88eaf78628056d722734392be56e0624dae779e3 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre Date: Wed, 17 Nov 2021 21:37:34 -0800 Subject: [PATCH 517/595] [Bug] Fix missing variable for Backlight Breathing (#15199) * [Bug] Fix missing varaible for Backlight Breathing * Better fix * formatting --- quantum/backlight/backlight_avr.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/quantum/backlight/backlight_avr.c b/quantum/backlight/backlight_avr.c index e3fe56aba3..634260800a 100644 --- a/quantum/backlight/backlight_avr.c +++ b/quantum/backlight/backlight_avr.c @@ -331,9 +331,9 @@ bool is_breathing(void) { return !!(TIMSKx & _BV(TOIEx)); } do { \ breathing_counter = 0; \ } while (0) -# define breathing_max() \ - do { \ - breathing_counter = breathing_period * breathing_ISR_frequency / 2; \ +# define breathing_max() \ + do { \ + breathing_counter = get_breathing_period() * breathing_ISR_frequency / 2; \ } while (0) void breathing_enable(void) { @@ -390,9 +390,9 @@ ISR(TIMERx_OVF_vect) } else { return; } - uint16_t interval = (uint16_t)breathing_period * breathing_ISR_frequency / BREATHING_STEPS; + uint16_t interval = (uint16_t)get_breathing_period() * breathing_ISR_frequency / BREATHING_STEPS; // resetting after one period to prevent ugly reset at overflow. - breathing_counter = (breathing_counter + 1) % (breathing_period * breathing_ISR_frequency); + breathing_counter = (breathing_counter + 1) % (get_breathing_period() * breathing_ISR_frequency); uint8_t index = breathing_counter / interval % BREATHING_STEPS; if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) || ((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1))) { @@ -454,4 +454,4 @@ void backlight_init_ports(void) { breathing_enable(); } #endif -} \ No newline at end of file +} From b9148eb1bd00d4cf2fded05d18add3e5198a706d Mon Sep 17 00:00:00 2001 From: Nick Brassel Date: Fri, 19 Nov 2021 04:05:08 +1100 Subject: [PATCH 518/595] [cli] Export list of `develop` PRs to be merged into `master` (#13944) * Add developer-only command for exporting the list of PRs associated with a merge to `develop`. * qmk pytest * Imports. * Remove dependencies from requirements file, manually handle. * Reduce complexity, qmk generate-api taking too long so relying on CI --- lib/python/qmk/cli/__init__.py | 1 + .../qmk/cli/generate/develop_pr_list.py | 119 ++++++++++++++++++ 2 files changed, 120 insertions(+) create mode 100755 lib/python/qmk/cli/generate/develop_pr_list.py diff --git a/lib/python/qmk/cli/__init__.py b/lib/python/qmk/cli/__init__.py index edf351d628..c51eece955 100644 --- a/lib/python/qmk/cli/__init__.py +++ b/lib/python/qmk/cli/__init__.py @@ -47,6 +47,7 @@ subcommands = [ 'qmk.cli.generate.api', 'qmk.cli.generate.compilation_database', 'qmk.cli.generate.config_h', + 'qmk.cli.generate.develop_pr_list', 'qmk.cli.generate.dfu_header', 'qmk.cli.generate.docs', 'qmk.cli.generate.info_json', diff --git a/lib/python/qmk/cli/generate/develop_pr_list.py b/lib/python/qmk/cli/generate/develop_pr_list.py new file mode 100755 index 0000000000..de4eaa7d88 --- /dev/null +++ b/lib/python/qmk/cli/generate/develop_pr_list.py @@ -0,0 +1,119 @@ +"""Export the initial list of PRs associated with a `develop` merge to `master`. +""" +import os +import re +from pathlib import Path +from subprocess import DEVNULL + +from milc import cli + +cache_timeout = 7 * 86400 +fix_expr = re.compile(r'fix', flags=re.IGNORECASE) +clean1_expr = re.compile(r'\[(develop|keyboard|keymap|core|cli|bug|docs|feature)\]', flags=re.IGNORECASE) +clean2_expr = re.compile(r'^(develop|keyboard|keymap|core|cli|bug|docs|feature):', flags=re.IGNORECASE) + + +def _get_pr_info(cache, gh, pr_num): + pull = cache.get(f'pull:{pr_num}') + if pull is None: + print(f'Retrieving info for PR #{pr_num}') + pull = gh.pulls.get(owner='qmk', repo='qmk_firmware', pull_number=pr_num) + cache.set(f'pull:{pr_num}', pull, cache_timeout) + return pull + + +def _try_open_cache(cli): + # These dependencies are manually handled because people complain. Fun. + try: + from sqlite_cache.sqlite_cache import SqliteCache + except ImportError: + return None + + cache_loc = Path(cli.config_file).parent + return SqliteCache(cache_loc) + + +def _get_github(): + try: + from ghapi.all import GhApi + except ImportError: + return None + + return GhApi() + + +@cli.argument('-f', '--from-ref', default='0.11.0', help='Git revision/tag/reference/branch to begin search') +@cli.argument('-b', '--branch', default='upstream/develop', help='Git branch to iterate (default: "upstream/develop")') +@cli.subcommand('Creates the develop PR list.', hidden=False if cli.config.user.developer else True) +def generate_develop_pr_list(cli): + """Retrieves information from GitHub regarding the list of PRs associated + with a merge of `develop` branch into `master`. + + Requires environment variable GITHUB_TOKEN to be set. + """ + + if 'GITHUB_TOKEN' not in os.environ or os.environ['GITHUB_TOKEN'] == '': + cli.log.error('Environment variable "GITHUB_TOKEN" is not set.') + return 1 + + cache = _try_open_cache(cli) + gh = _get_github() + + git_args = ['git', 'rev-list', '--oneline', '--no-merges', '--reverse', f'{cli.args.from_ref}...{cli.args.branch}', '^upstream/master'] + commit_list = cli.run(git_args, capture_output=True, stdin=DEVNULL) + + if cache is None or gh is None: + cli.log.error('Missing one or more dependent python packages: "ghapi", "python-sqlite-cache"') + return 1 + + pr_list_bugs = [] + pr_list_dependencies = [] + pr_list_core = [] + pr_list_keyboards = [] + pr_list_keyboard_fixes = [] + pr_list_cli = [] + pr_list_others = [] + + def _categorise_commit(commit_info): + def fix_or_normal(info, fixes_collection, normal_collection): + if "bug" in info['pr_labels'] or fix_expr.search(info['title']): + fixes_collection.append(info) + else: + normal_collection.append(info) + + if "dependencies" in commit_info['pr_labels']: + fix_or_normal(commit_info, pr_list_bugs, pr_list_dependencies) + elif "core" in commit_info['pr_labels']: + fix_or_normal(commit_info, pr_list_bugs, pr_list_core) + elif "keyboard" in commit_info['pr_labels'] or "keymap" in commit_info['pr_labels'] or "via" in commit_info['pr_labels']: + fix_or_normal(commit_info, pr_list_keyboard_fixes, pr_list_keyboards) + elif "cli" in commit_info['pr_labels']: + fix_or_normal(commit_info, pr_list_bugs, pr_list_cli) + else: + fix_or_normal(commit_info, pr_list_bugs, pr_list_others) + + git_expr = re.compile(r'^(?P[a-f0-9]+) (?P.*) \(#(?P<pr>[0-9]+)\)$') + for line in commit_list.stdout.split('\n'): + match = git_expr.search(line) + if match: + pr_info = _get_pr_info(cache, gh, match.group("pr")) + commit_info = {'hash': match.group("hash"), 'title': match.group("title"), 'pr_num': int(match.group("pr")), 'pr_labels': [label.name for label in pr_info.labels.items]} + _categorise_commit(commit_info) + + def _dump_commit_list(name, collection): + if len(collection) == 0: + return + print("") + print(f"{name}:") + for commit in sorted(collection, key=lambda x: x['pr_num']): + title = clean1_expr.sub('', clean2_expr.sub('', commit['title'])).strip() + pr_num = commit['pr_num'] + print(f'* {title} ([#{pr_num}](https://github.com/qmk/qmk_firmware/pull/{pr_num}))') + + _dump_commit_list("Bugs", pr_list_bugs) + _dump_commit_list("Core", pr_list_core) + _dump_commit_list("CLI", pr_list_cli) + _dump_commit_list("Submodule updates", pr_list_dependencies) + _dump_commit_list("Keyboards", pr_list_keyboards) + _dump_commit_list("Keyboard fixes", pr_list_keyboard_fixes) + _dump_commit_list("Others", pr_list_others) From aee10ccc5c80e71977cbbccb5b86059c87ba7d48 Mon Sep 17 00:00:00 2001 From: Ryan <fauxpark@gmail.com> Date: Fri, 19 Nov 2021 04:55:07 +1100 Subject: [PATCH 519/595] [CLI] `list-keymaps`/`list-layouts`: Check keyboard passed in (#15204) * [CLI] `list-keymaps`/`list-layouts`: Check keyboard passed in * Update lib/python/qmk/cli/list/keymaps.py Co-authored-by: Joel Challis <git@zvecr.com> * Update lib/python/qmk/cli/list/layouts.py Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Joel Challis <git@zvecr.com> --- lib/python/qmk/cli/list/keymaps.py | 5 +++++ lib/python/qmk/cli/list/layouts.py | 5 +++++ 2 files changed, 10 insertions(+) diff --git a/lib/python/qmk/cli/list/keymaps.py b/lib/python/qmk/cli/list/keymaps.py index d79ab75b58..d2ef136c06 100644 --- a/lib/python/qmk/cli/list/keymaps.py +++ b/lib/python/qmk/cli/list/keymaps.py @@ -13,5 +13,10 @@ from qmk.keyboard import keyboard_completer, keyboard_folder def list_keymaps(cli): """List the keymaps for a specific keyboard """ + if not cli.config.list_keymaps.keyboard: + cli.log.error('Missing required arguments: --keyboard') + cli.subcommands['list-keymaps'].print_help() + return False + for name in qmk.keymap.list_keymaps(cli.config.list_keymaps.keyboard): print(name) diff --git a/lib/python/qmk/cli/list/layouts.py b/lib/python/qmk/cli/list/layouts.py index 8e07afeeca..df593dc390 100644 --- a/lib/python/qmk/cli/list/layouts.py +++ b/lib/python/qmk/cli/list/layouts.py @@ -13,6 +13,11 @@ from qmk.info import info_json def list_layouts(cli): """List the layouts for a specific keyboard """ + if not cli.config.list_layouts.keyboard: + cli.log.error('Missing required arguments: --keyboard') + cli.subcommands['list-layouts'].print_help() + return False + info_data = info_json(cli.config.list_layouts.keyboard) for name in sorted(info_data.get('community_layouts', [])): print(name) From 50dc313e809ae1e5e7775d90fd1cb43152091e48 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre <drashna@live.com> Date: Thu, 18 Nov 2021 11:06:55 -0800 Subject: [PATCH 520/595] [Bug] Revert backlight pins on function call (#15205) --- quantum/backlight/backlight_avr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/quantum/backlight/backlight_avr.c b/quantum/backlight/backlight_avr.c index 634260800a..67b551dc3c 100644 --- a/quantum/backlight/backlight_avr.c +++ b/quantum/backlight/backlight_avr.c @@ -222,7 +222,7 @@ ISR(TIMERx_OVF_vect) { // takes many computation cycles). // so better not turn them on while the counter TOP is very low. if (OCRxx > ICRx / 250 + 5) { - FOR_EACH_LED(backlight_on(backlight_pin);) + backlight_pins_on(); } } From a5155b98fb29ad4ea6de73f39a0d413d79883356 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Henr=C3=A9=20Botha?= <henrebotha@gmail.com> Date: Fri, 19 Nov 2021 05:34:22 +0100 Subject: [PATCH 521/595] [Docs] Clarify "nested" and "rolling" key sequences (#14655) --- docs/tap_hold.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/docs/tap_hold.md b/docs/tap_hold.md index 5a4c209617..dbad48fd9f 100644 --- a/docs/tap_hold.md +++ b/docs/tap_hold.md @@ -67,7 +67,7 @@ An example of a sequence which is affected by the “permissive hold” mode: - `KC_L` Up - `LT(2, KC_A)` Up -Normally, if you do all this within the `TAPPING_TERM` (default: 200ms), this will be registered as `al` by the firmware and host system. With the `PERMISSIVE_HOLD` option enabled, the Layer Tap key is considered as a layer switch if another key is tapped, and the above sequence would be registered as `KC_RGHT` (the mapping of `L` on layer 2). +Normally, if you do all this within the `TAPPING_TERM` (default: 200ms), this will be registered as `al` by the firmware and host system. With the `PERMISSIVE_HOLD` option enabled, the Layer Tap key is considered as a layer switch if another key is tapped, and the above sequence would be registered as `KC_RGHT` (the mapping of `L` on layer 2). We could describe this sequence as a “nested press” (the modified key's key down and key up events are “nested” between the dual-role key's key down and key up events). However, this slightly different sequence will not be affected by the “permissive hold” mode: @@ -76,7 +76,7 @@ However, this slightly different sequence will not be affected by the “permiss - `LT(2, KC_A)` Up - `KC_L` Up -In the sequence above the dual-role key is released before the other key is released, and if that happens within the tapping term, the “permissive hold” mode will still choose the tap action for the dual-role key, and the sequence will be registered as `al` by the host. +In the sequence above the dual-role key is released before the other key is released, and if that happens within the tapping term, the “permissive hold” mode will still choose the tap action for the dual-role key, and the sequence will be registered as `al` by the host. We could describe this as a “rolling press” (the two keys' key down and key up events behave as if you were rolling a ball across the two keys, first pressing each key down in sequence and then releasing them in the same order). ?> The `PERMISSIVE_HOLD` option also affects Mod Tap keys, but this may not be noticeable if you do not also enable the `IGNORE_MOD_TAP_INTERRUPT` option for those keys, because the default handler for Mod Tap keys also considers both the “nested press” and “rolling press” sequences like shown above as a modifier hold, not the tap action. If you do not enable `IGNORE_MOD_TAP_INTERRUPT`, the effect of `PERMISSIVE_HOLD` on Mod Tap keys would be limited to reducing the delay before the key events are made visible to the host. From d2b20692fb5a2749627ffe79106f02cc10cf7545 Mon Sep 17 00:00:00 2001 From: jfescobar18 <81986725+jfescobar18@users.noreply.github.com> Date: Thu, 18 Nov 2021 23:03:56 -0600 Subject: [PATCH 522/595] [Keyboard] Add miniashen40 (#14238) Co-authored-by: Joel Challis <git@zvecr.com> Co-authored-by: Ryan <fauxpark@gmail.com> --- keyboards/mechanickeys/miniashen40/config.h | 53 +++++++++++++++++++ keyboards/mechanickeys/miniashen40/info.json | 15 ++++++ .../miniashen40/keymaps/default/keymap.c | 47 ++++++++++++++++ .../miniashen40/keymaps/via/keymap.c | 47 ++++++++++++++++ .../miniashen40/keymaps/via/rules.mk | 2 + .../mechanickeys/miniashen40/miniashen40.c | 17 ++++++ .../mechanickeys/miniashen40/miniashen40.h | 42 +++++++++++++++ keyboards/mechanickeys/miniashen40/readme.md | 40 ++++++++++++++ keyboards/mechanickeys/miniashen40/rules.mk | 21 ++++++++ 9 files changed, 284 insertions(+) create mode 100644 keyboards/mechanickeys/miniashen40/config.h create mode 100644 keyboards/mechanickeys/miniashen40/info.json create mode 100644 keyboards/mechanickeys/miniashen40/keymaps/default/keymap.c create mode 100644 keyboards/mechanickeys/miniashen40/keymaps/via/keymap.c create mode 100644 keyboards/mechanickeys/miniashen40/keymaps/via/rules.mk create mode 100644 keyboards/mechanickeys/miniashen40/miniashen40.c create mode 100644 keyboards/mechanickeys/miniashen40/miniashen40.h create mode 100644 keyboards/mechanickeys/miniashen40/readme.md create mode 100644 keyboards/mechanickeys/miniashen40/rules.mk diff --git a/keyboards/mechanickeys/miniashen40/config.h b/keyboards/mechanickeys/miniashen40/config.h new file mode 100644 index 0000000000..bf2ea6e00f --- /dev/null +++ b/keyboards/mechanickeys/miniashen40/config.h @@ -0,0 +1,53 @@ +/* Copyright 2021 jfescobar18 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x4D4B // MechanicKeys +#define PRODUCT_ID 0x6D6E +#define DEVICE_VER 0x0001 +#define MANUFACTURER MechanicKeys +#define PRODUCT MINI ASHEN 40 + +/* key matrix size */ +#define MATRIX_ROWS 4 +#define MATRIX_COLS 13 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { B1, B2, B3, B4 } +#define MATRIX_COL_PINS { C5, C4, C3, D0, C2, D1, C1, C0, D4, B0, D7, D6, B5 } +#define UNUSED_PINS + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST \ No newline at end of file diff --git a/keyboards/mechanickeys/miniashen40/info.json b/keyboards/mechanickeys/miniashen40/info.json new file mode 100644 index 0000000000..6a6b1e951a --- /dev/null +++ b/keyboards/mechanickeys/miniashen40/info.json @@ -0,0 +1,15 @@ +{ + "keyboard_name": "Mini Ashen 40", + "url": "", + "maintainer": "qmk", + "layouts": { + "LAYOUT": { + "layout": [ + {"label": "Tab", "x": 0, "y": 0}, {"label": "Q", "x": 1, "y": 0}, {"label": "W", "x": 2, "y": 0}, {"label": "E", "x": 3, "y": 0}, {"label": "R", "x": 4, "y": 0}, {"label": "T", "x": 5, "y": 0}, {"label": "Y", "x": 6, "y": 0}, {"label": "U", "x": 7, "y": 0}, {"label": "I", "x": 8, "y": 0}, {"label": "O", "x": 9, "y": 0}, {"label": "P", "x": 10, "y": 0}, {"label": "Del", "x": 11, "y": 0}, {"label": "M1", "x": 12.25, "y": 0}, {"label": "M2", "x": 13.25, "y": 0}, + {"label": "Ctrl", "x": 0, "y": 1, "w":1.25}, {"label": "A", "x": 1.25, "y": 1}, {"label": "S", "x": 2.25, "y": 1}, {"label": "D", "x": 3.25, "y": 1}, {"label": "F", "x": 4.25, "y": 1}, {"label": "G", "x": 5.25, "y": 1}, {"label": "H", "x": 6.25, "y": 1}, {"label": "J", "x": 7.25, "y": 1}, {"label": "K", "x": 8.25, "y": 1}, {"label": "L", "x": 9.25, "y": 1}, {"label": "Enter", "x": 10.25, "y": 1, "w":1.75}, {"label": "M3", "x": 12.25, "y": 1}, {"label": "M4", "x": 13.25, "y": 1}, + {"label": "Shift", "x": 0, "y": 2, "w":1.75}, {"label": "Z", "x": 1.75, "y": 2}, {"label": "X", "x": 2.75, "y": 2}, {"label": "C", "x": 3.75, "y": 2}, {"label": "V", "x": 4.75, "y": 2}, {"label": "B", "x": 5.75, "y": 2}, {"label": "N", "x": 6.75, "y": 2}, {"label": "M", "x": 7.75, "y": 2}, {"label": ",", "x": 8.75, "y": 2}, {"label": ".", "x": 9.75, "y": 2}, {"label": "Fn", "x": 10.75, "y": 2, "w":1.25}, {"label": "Up", "x": 12.25, "y": 2.25}, + {"label": "Alt", "x": 1, "y": 3}, {"label": "OS", "x": 2, "y": 3, "w": 1.5}, {"label": "", "x": 3.5, "y": 3, "w": 2.75}, {"label": "", "x": 6.25, "y": 3, "w": 2.25}, {"label": "Os", "x": 8.5, "y": 3, "w": 1.5}, {"label": "Alt", "x": 10, "y": 3}, {"label": "Left", "x": 11.25, "y": 3.25}, {"label": "Down", "x": 12.25, "y": 3.25}, {"label": "Right", "x": 13.25, "y": 3.25} + ] + } + } +} \ No newline at end of file diff --git a/keyboards/mechanickeys/miniashen40/keymaps/default/keymap.c b/keyboards/mechanickeys/miniashen40/keymaps/default/keymap.c new file mode 100644 index 0000000000..b49b5882fa --- /dev/null +++ b/keyboards/mechanickeys/miniashen40/keymaps/default/keymap.c @@ -0,0 +1,47 @@ +/* Copyright 2021 jfescobar18 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( /* 0: qwerty */ + KC_GESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_MPRV, KC_MNXT, + CTL_T(KC_TAB), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT, KC_MUTE, KC_MPLY, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, MO(1), KC_UP, KC_BSPC, + KC_LALT, KC_LGUI, KC_SPC, KC_SPC, KC_RGUI, KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT( /* 1: Symbols */ + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_TRNS, KC_TRNS, + MO(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_SCLN, KC_QUOT, KC_BSLS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SLSH, KC_TRNS, KC_TRNS, KC_EQL, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + [2] = LAYOUT( /* 2: Fn */ + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F12, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + [3] = LAYOUT( /*3: Empty */ + RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), +}; diff --git a/keyboards/mechanickeys/miniashen40/keymaps/via/keymap.c b/keyboards/mechanickeys/miniashen40/keymaps/via/keymap.c new file mode 100644 index 0000000000..0aa9476b4e --- /dev/null +++ b/keyboards/mechanickeys/miniashen40/keymaps/via/keymap.c @@ -0,0 +1,47 @@ +/* Copyright 2021 Francisco Escobar + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( /* 0: qwerty */ + KC_GESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_MPRV, KC_MNXT, + CTL_T(KC_TAB), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT, KC_MUTE, KC_MPLY, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, MO(1), KC_UP, KC_BSPC, + KC_LALT, KC_LGUI, KC_SPC, KC_SPC, KC_RGUI, KC_RALT, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT( /* 1: Symbols */ + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_TRNS, KC_TRNS, + MO(2), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_SCLN, KC_QUOT, KC_BSLS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_SLSH, KC_TRNS, KC_TRNS, KC_EQL, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + [2] = LAYOUT( /* 2: Fn */ + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_F12, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + + [3] = LAYOUT( /*3: Empty */ + RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), +}; diff --git a/keyboards/mechanickeys/miniashen40/keymaps/via/rules.mk b/keyboards/mechanickeys/miniashen40/keymaps/via/rules.mk new file mode 100644 index 0000000000..36b7ba9cbc --- /dev/null +++ b/keyboards/mechanickeys/miniashen40/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/mechanickeys/miniashen40/miniashen40.c b/keyboards/mechanickeys/miniashen40/miniashen40.c new file mode 100644 index 0000000000..9c740e117e --- /dev/null +++ b/keyboards/mechanickeys/miniashen40/miniashen40.c @@ -0,0 +1,17 @@ +/* Copyright 2021 jfescobar18 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#include "miniashen40.h" diff --git a/keyboards/mechanickeys/miniashen40/miniashen40.h b/keyboards/mechanickeys/miniashen40/miniashen40.h new file mode 100644 index 0000000000..4430396b41 --- /dev/null +++ b/keyboards/mechanickeys/miniashen40/miniashen40.h @@ -0,0 +1,42 @@ +/* Copyright 2021 jfescobar18 + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "quantum.h" + +#define XXX KC_NO + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ + K30, K31, K33, K36, K38, K39, K3A, K3B, K3C \ +) \ +{ \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C }, \ + { K30, K31, XXX, K33, XXX, XXX, K36, XXX, K38, K39, K3A, K3B, K3C } \ +} diff --git a/keyboards/mechanickeys/miniashen40/readme.md b/keyboards/mechanickeys/miniashen40/readme.md new file mode 100644 index 0000000000..29f7b68fd1 --- /dev/null +++ b/keyboards/mechanickeys/miniashen40/readme.md @@ -0,0 +1,40 @@ +# Mini Ashen 40 + +![Mini Ashen 40](https://i.imgur.com/0k3gFZCh.jpeg) + +![Mini Ashen 40](https://i.imgur.com/B1w8qwPh.jpeg) + +![Mini Ashen 40](https://i.imgur.com/LqxXW0Rh.jpeg) + +A 40% keyboard with some extras + - Arrows + - Mini macro cluster + - Full assembly with only through hole components + +* Keyboard Maintainer: [jfescobar18](https://github.com/jfescobar18) +* Hardware Supported: Mini Ashen 40 PCB and Case +* Hardware Availability: [MechanicKeys](https://www.facebook.com/MechanicKeys-104963764775280) + +Make example for this keyboard (after setting up your build environment): + + make mechanickeys/miniashen40:default + +Flashing example for this keyboard: + + make mechanickeys/miniashen40:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +* **Physical**: + 1. Press and hold `BOOT` switch + 2. Tap `RESET` switch + 3. Release `BOOT` switch +* **Keycode in layout**: Press the key mapped to `RESET` if it is available + +## Flash bootloader +* [Follow this instructions](https://github.com/jfescobar18/USBaspLoader) diff --git a/keyboards/mechanickeys/miniashen40/rules.mk b/keyboards/mechanickeys/miniashen40/rules.mk new file mode 100644 index 0000000000..2057d9c939 --- /dev/null +++ b/keyboards/mechanickeys/miniashen40/rules.mk @@ -0,0 +1,21 @@ +# MCU name +MCU = atmega328p + +# Bootloader selection +BOOTLOADER = usbasploader + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output From 26ae43219001dfe20aa525b6fb35f2aeb2b76617 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Fri, 19 Nov 2021 06:12:21 +0000 Subject: [PATCH 523/595] handwired/split89 Layout Macro Refactor (#15210) --- keyboards/handwired/split89/info.json | 97 ++++++++++++++++++- .../split89/keymaps/default/keymap.c | 28 +++--- keyboards/handwired/split89/split89.h | 38 ++++---- 3 files changed, 130 insertions(+), 33 deletions(-) diff --git a/keyboards/handwired/split89/info.json b/keyboards/handwired/split89/info.json index 7147420f32..52e7e305d8 100644 --- a/keyboards/handwired/split89/info.json +++ b/keyboards/handwired/split89/info.json @@ -4,7 +4,102 @@ "url": "https://github.com/jurassic73/split89", "layouts": { "LAYOUT": { - "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6, "y":0}, {"label":"F6", "x":10.25, "y":0}, {"label":"F7", "x":11.25, "y":0}, {"label":"F8", "x":12.25, "y":0}, {"label":"F9", "x":13.75, "y":0}, {"label":"F10", "x":14.75, "y":0}, {"label":"F11", "x":15.75, "y":0}, {"label":"F12", "x":16.75, "y":0}, {"label":"PrtSc", "x":18, "y":0}, {"label":"Scroll Lock", "x":19, "y":0}, {"label":"Pause", "x":20, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":9.75, "y":1.5}, {"label":"*", "x":10.75, "y":1.5}, {"label":"(", "x":11.75, "y":1.5}, {"label":")", "x":12.75, "y":1.5}, {"label":"_", "x":13.75, "y":1.5}, {"label":"+", "x":14.75, "y":1.5}, {"label":"Backspace", "x":15.75, "y":1.5, "w":2}, {"label":"Insert", "x":18, "y":1.5}, {"label":"Home", "x":19, "y":1.5}, {"label":"PgUp", "x":20, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":9.25, "y":2.5}, {"label":"U", "x":10.25, "y":2.5}, {"label":"I", "x":11.25, "y":2.5}, {"label":"O", "x":12.25, "y":2.5}, {"label":"P", "x":13.25, "y":2.5}, {"label":"{", "x":14.25, "y":2.5}, {"label":"}", "x":15.25, "y":2.5}, {"label":"|", "x":16.25, "y":2.5, "w":1.5}, {"label":"Delete", "x":18, "y":2.5}, {"label":"End", "x":19, "y":2.5}, {"label":"PgDn", "x":20, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":9.5, "y":3.5}, {"label":"J", "x":10.5, "y":3.5}, {"label":"K", "x":11.5, "y":3.5}, {"label":"L", "x":12.5, "y":3.5}, {"label":":", "x":13.5, "y":3.5}, {"label":"\"", "x":14.5, "y":3.5}, {"label":"Enter", "x":15.5, "y":3.5, "w":2.25}, {"label":"Shift", "x":0, "y":4.5, "w":2.25}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":10, "y":4.5}, {"label":"M", "x":11, "y":4.5}, {"label":"<", "x":12, "y":4.5}, {"label":">", "x":13, "y":4.5}, {"label":"?", "x":14, "y":4.5}, {"label":"Shift", "x":15, "y":4.5, "w":2.75}, {"label":"\u2191", "x":19, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Fn", "x":1.25, "y":5.5, "w":1.25}, {"label":"Win", "x":2.5, "y":5.5, "w":1.25}, {"label":"Alt", "x":3.75, "y":5.5, "w":1.25}, {"x":5, "y":5.5, "w":2.25}, {"x":10, "y":5.5, "w":2.75}, {"label":"Alt", "x":12.75, "y":5.5, "w":1.25}, {"label":"Win", "x":14, "y":5.5, "w":1.25}, {"label":"Menu", "x":15.25, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":16.5, "y":5.5, "w":1.25}, {"label":"\u2190", "x":18, "y":5.5}, {"label":"\u2193", "x":19, "y":5.5}, {"label":"\u2192", "x":20, "y":5.5}] + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"F1", "x":2, "y":0}, + {"label":"F2", "x":3, "y":0}, + {"label":"F3", "x":4, "y":0}, + {"label":"F4", "x":5, "y":0}, + {"label":"F5", "x":6, "y":0}, + {"label":"F6", "x":8.5, "y":0}, + {"label":"F7", "x":9.5, "y":0}, + {"label":"F8", "x":10.5, "y":0}, + {"label":"F9", "x":12.0, "y":0}, + {"label":"F10", "x":13.0, "y":0}, + {"label":"F11", "x":14.0, "y":0}, + {"label":"F12", "x":15.0, "y":0}, + {"label":"PrtSc", "x":16.25, "y":0}, + {"label":"Scroll Lock", "x":17.25, "y":0}, + {"label":"Pause", "x":18.25, "y":0}, + + {"label":"`~", "x":0, "y":1.25}, + {"label":"1!", "x":1, "y":1.25}, + {"label":"2@", "x":2, "y":1.25}, + {"label":"3#", "x":3, "y":1.25}, + {"label":"4$", "x":4, "y":1.25}, + {"label":"5%", "x":5, "y":1.25}, + {"label":"6^", "x":6, "y":1.25}, + {"label":"7&", "x":8.0, "y":1.25}, + {"label":"8*", "x":9.0, "y":1.25}, + {"label":"9(", "x":10.0, "y":1.25}, + {"label":"0)", "x":11.0, "y":1.25}, + {"label":"-_", "x":12.0, "y":1.25}, + {"label":"=+", "x":13.0, "y":1.25}, + {"label":"Backspace", "x":14.0, "y":1.25, "w":2}, + {"label":"Insert", "x":16.25, "y":1.25}, + {"label":"Home", "x":17.25, "y":1.25}, + {"label":"PgUp", "x":18.25, "y":1.25}, + + {"label":"Tab", "x":0, "y":2.25, "w":1.5}, + {"label":"Q", "x":1.5, "y":2.25}, + {"label":"W", "x":2.5, "y":2.25}, + {"label":"E", "x":3.5, "y":2.25}, + {"label":"R", "x":4.5, "y":2.25}, + {"label":"T", "x":5.5, "y":2.25}, + {"label":"Y", "x":7.5, "y":2.25}, + {"label":"U", "x":8.5, "y":2.25}, + {"label":"I", "x":9.5, "y":2.25}, + {"label":"O", "x":10.5, "y":2.25}, + {"label":"P", "x":11.5, "y":2.25}, + {"label":"[{", "x":12.5, "y":2.25}, + {"label":"]}", "x":13.5, "y":2.25}, + {"label":"\\|", "x":14.5, "y":2.25, "w":1.5}, + {"label":"Delete", "x":16.25, "y":2.25}, + {"label":"End", "x":17.25, "y":2.25}, + {"label":"PgDn", "x":18.25, "y":2.25}, + + {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, + {"label":"A", "x":1.75, "y":3.25}, + {"label":"S", "x":2.75, "y":3.25}, + {"label":"D", "x":3.75, "y":3.25}, + {"label":"F", "x":4.75, "y":3.25}, + {"label":"G", "x":5.75, "y":3.25}, + {"label":"H", "x":7.75, "y":3.25}, + {"label":"J", "x":8.75, "y":3.25}, + {"label":"K", "x":9.75, "y":3.25}, + {"label":"L", "x":10.75, "y":3.25}, + {"label":";:", "x":11.75, "y":3.25}, + {"label":"'\"", "x":12.75, "y":3.25}, + {"label":"Enter", "x":13.75, "y":3.25, "w":2.25}, + + {"label":"Shift", "x":0, "y":4.25, "w":2.25}, + {"label":"Z", "x":2.25, "y":4.25}, + {"label":"X", "x":3.25, "y":4.25}, + {"label":"C", "x":4.25, "y":4.25}, + {"label":"V", "x":5.25, "y":4.25}, + {"label":"B", "x":6.25, "y":4.25}, + {"label":"N", "x":8.25, "y":4.25}, + {"label":"M", "x":9.25, "y":4.25}, + {"label":",<", "x":10.25, "y":4.25}, + {"label":".>", "x":11.25, "y":4.25}, + {"label":"/?", "x":12.25, "y":4.25}, + {"label":"Shift", "x":13.25, "y":4.25, "w":2.75}, + {"label":"\u2191", "x":17.25, "y":4.25}, + + {"label":"Ctrl", "x":0, "y":5.25, "w":1.25}, + {"label":"Fn", "x":1.25, "y":5.25, "w":1.25}, + {"label":"Win", "x":2.5, "y":5.25, "w":1.25}, + {"label":"Alt", "x":3.75, "y":5.25, "w":1.25}, + {"label":"Space", "x":5, "y":5.25, "w":2.25}, + {"label":"Space", "x":8.25, "y":5.25, "w":2.75}, + {"label":"Alt", "x":11.0, "y":5.25, "w":1.25}, + {"label":"Win", "x":12.25, "y":5.25, "w":1.25}, + {"label":"Menu", "x":13.5, "y":5.25, "w":1.25}, + {"label":"Ctrl", "x":14.75, "y":5.25, "w":1.25}, + {"label":"\u2190", "x":16.25, "y":5.25}, + {"label":"\u2193", "x":17.25, "y":5.25}, + {"label":"\u2192", "x":18.25, "y":5.25} + ] } } } diff --git a/keyboards/handwired/split89/keymaps/default/keymap.c b/keyboards/handwired/split89/keymaps/default/keymap.c index 5b2ed1740d..bc5540b375 100644 --- a/keyboards/handwired/split89/keymaps/default/keymap.c +++ b/keyboards/handwired/split89/keymaps/default/keymap.c @@ -23,20 +23,20 @@ enum layer_names { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Base */ [0] = LAYOUT( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, - KC_GRV,KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, - KC_TAB,KC_Q, KC_W, KC_E, KC_R, KC_T, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_Y, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_H, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSHIFT, KC_UP, - KC_LCTL,MO(1),KC_LGUI,KC_LALT,KC_SPACE, KC_N, KC_SPACE, KC_RALT,KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT - ), + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, MO(1), KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), /* Volume */ [1] = LAYOUT( - KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, - KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_VOLU, - KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_MEDIA_PLAY_PAUSE, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT - ), + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT + ), }; diff --git a/keyboards/handwired/split89/split89.h b/keyboards/handwired/split89/split89.h index 7e94027078..693476cea3 100644 --- a/keyboards/handwired/split89/split89.h +++ b/keyboards/handwired/split89/split89.h @@ -18,6 +18,8 @@ #include "quantum.h" +#define XXX KC_NO + /* This is a shortcut to help you visually see your layout. * * The first section contains all of the arguments representing the physical @@ -27,24 +29,24 @@ * represents the switch matrix which includes blanks in the wired out matrix. */ #define LAYOUT( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, k14, k15, \ - k32, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k30, k31, \ - k48, k33, k34, k35, k36, k37, k54, k38, k39, k40, k41, k42, k43, k44, k45, k46, k47, \ - k61, k49, k50, k51, k52, k53, k67, k55, k56, k57, k58, k59, k60, \ - k74, k62, k63, k64, k65, k66, k80, k68, k69, k70, k71, k72, k73, \ - k75, k76, k77, k78, k79, k81, k82, k83, k84, k85, k86, k87, k88 \ + K04, K05, K06, K07, K08, K09, K60, K61, K62, K63, K64, K65, K66, K67, K68, K69, \ + K24, K14, K15, K16, K17, K18, K19, K70, K71, K72, K73, K74, K75, K76, K77, K78, K79, \ + K34, K25, K26, K27, K28, K29, K39, K90, K80, K81, K82, K83, K84, K85, K86, K87, K88, \ + K89, K44, K35, K36, K37, K38, K49, KA0, K91, K92, K93, K94, K95, \ + K96, K54, K45, K46, K47, K48, K59, KB0, KA1, KA2, KA3, KA4, KA6, \ + KA8, K55, K56, K57, K58, KB1, KB3, KB4, KB5, KB6, KB7, KB8, KB9 \ ) \ { \ - { KC_NO, KC_NO, KC_NO, KC_NO, k00, k01, k02, k03, k04, k05 }, \ - { KC_NO, KC_NO, KC_NO, KC_NO, k16, k17, k18, k19, k20, k21 }, \ - { KC_NO, KC_NO, KC_NO, KC_NO, k32, k33, k34, k35, k36, k37 }, \ - { KC_NO, KC_NO, KC_NO, KC_NO, k48, k49, k50, k51, k52, k53 }, \ - { KC_NO, KC_NO, KC_NO, KC_NO, k61, k62, k63, k64, k65, k66, }, \ - { KC_NO, KC_NO, KC_NO, KC_NO, k74, k75, k76, k77, k78, k79, }, \ - { k06, k07, k08, k09, k10, k11, k12, k13, k14, k15 }, \ - { k22, k23, k24, k25, k26, k27, k28, k29, k30, k31 }, \ - { k38, k39, k40, k41, k42, k43, k44, k45, k46, k47 }, \ - { k54, k55, k56, k57, k58, k59, k60, KC_NO, KC_NO, KC_NO }, \ - { k67, k68, k69, k70, k71, KC_NO, k72, KC_NO, k73, KC_NO }, \ - { k80, k81, KC_NO, k82, k83, k84, k85, k86, k87, k88 } \ + { XXX, XXX, XXX, XXX, K04, K05, K06, K07, K08, K09 }, \ + { XXX, XXX, XXX, XXX, K14, K15, K16, K17, K18, K19 }, \ + { XXX, XXX, XXX, XXX, K24, K25, K26, K27, K28, K29 }, \ + { XXX, XXX, XXX, XXX, K34, K35, K36, K37, K38, K39 }, \ + { XXX, XXX, XXX, XXX, K44, K45, K46, K47, K48, K49 }, \ + { XXX, XXX, XXX, XXX, K54, K55, K56, K57, K58, K59 }, \ + { K60, K61, K62, K63, K64, K65, K66, K67, K68, K69 }, \ + { K70, K71, K72, K73, K74, K75, K76, K77, K78, K79 }, \ + { K80, K81, K82, K83, K84, K85, K86, K87, K88, K89 }, \ + { K90, K91, K92, K93, K94, K95, K96, XXX, XXX, XXX }, \ + { KA0, KA1, KA2, KA3, KA4, XXX, KA6, XXX, KA8, XXX }, \ + { KB0, KB1, XXX, KB3, KB4, KB5, KB6, KB7, KB8, KB9 } \ } From 9cdbc040cd352aa1f44022c90f137ba5bcbe1c36 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Fri, 19 Nov 2021 06:12:49 +0000 Subject: [PATCH 524/595] =?UTF-8?q?FFKeebs=20P=C3=BAca=20Refactor=20(#1520?= =?UTF-8?q?8)?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- keyboards/ffkeebs/puca/info.json | 88 +++++++++++++++-- .../ffkeebs/puca/keymaps/default/keymap.c | 52 ++++------ .../puca/keymaps/default_numpad/keymap.c | 38 ++++++++ .../puca/keymaps/default_ortho/keymap.c | 38 ++++++++ keyboards/ffkeebs/puca/puca.c | 20 +++- keyboards/ffkeebs/puca/puca.h | 96 +++++++++++++++---- keyboards/ffkeebs/puca/readme.md | 2 +- keyboards/ffkeebs/puca/rules.mk | 6 +- 8 files changed, 274 insertions(+), 66 deletions(-) create mode 100644 keyboards/ffkeebs/puca/keymaps/default_numpad/keymap.c create mode 100644 keyboards/ffkeebs/puca/keymaps/default_ortho/keymap.c diff --git a/keyboards/ffkeebs/puca/info.json b/keyboards/ffkeebs/puca/info.json index 0b5b957e63..204f0ca497 100644 --- a/keyboards/ffkeebs/puca/info.json +++ b/keyboards/ffkeebs/puca/info.json @@ -2,35 +2,105 @@ "keyboard_name": "Puca", "url": "https://ffkeebs.com/collections/puca/", "maintainer": "Sleepdealr", + "layout_aliases": { + "LAYOUT": "LAYOUT_all" + }, "layouts": { - "LAYOUT": { + "LAYOUT_all": { "layout": [ { "label": "Rotary", "x": 0.5, "y": 0 }, { "label": "Pg Up", "x": 2, "y": 0 }, { "label": "Pg Dn", "x": 3, "y": 0 }, + { "label": "Layer Toggle", "x": 0, "y": 1.25 }, { "label": "/", "x": 1, "y": 1.25 }, { "label": "*", "x": 2, "y": 1.25 }, { "label": "-", "x": 3, "y": 1.25 }, + { "label": "7", "x": 0, "y": 2.25 }, { "label": "8", "x": 1, "y": 2.25 }, { "label": "9", "x": 2, "y": 2.25 }, - { "label": "+", "x": 3, "y": 2.25, "h": 2 }, - { "label": "+", "x": 4, "y": 2.25 }, + { "label": "+", "x": 3, "y": 2.25 }, + { "label": "+", "x": 4, "y": 2.25, "h": 2 }, + + { "label": "4", "x": 0, "y": 3.25 }, + { "label": "5", "x": 1, "y": 3.25 }, + { "label": "6", "x": 2, "y": 3.25 }, + { "label": "|", "x": 3, "y": 3.25 }, + + { "label": "1", "x": 0, "y": 4.25 }, + { "label": "2", "x": 1, "y": 4.25 }, + { "label": "3", "x": 2, "y": 4.25 }, + { "label": "Enter", "x": 3, "y": 4.25 }, + { "label": "Enter", "x": 4, "y": 4.25, "h": 2 }, + + { "label": "0", "x": 0, "y": 5.25 }, + { "label": "00", "x": 1, "y": 5.25 }, + { "label": ".", "x": 2, "y": 5.25 }, + { "label": ".", "x": 3, "y": 5.25 }, + + { "label": "0", "x": 0, "y": 6.25, "w": 2 } + ] + }, + "LAYOUT_numpad": { + "layout": [ + { "label": "Rotary", "x": 0.5, "y": 0 }, + { "label": "Pg Up", "x": 2, "y": 0 }, + { "label": "Pg Dn", "x": 3, "y": 0 }, + + { "label": "Layer Toggle", "x": 0, "y": 1.25 }, + { "label": "/", "x": 1, "y": 1.25 }, + { "label": "*", "x": 2, "y": 1.25 }, + { "label": "-", "x": 3, "y": 1.25 }, + + { "label": "7", "x": 0, "y": 2.25 }, + { "label": "8", "x": 1, "y": 2.25 }, + { "label": "9", "x": 2, "y": 2.25 }, + { "label": "4", "x": 0, "y": 3.25 }, { "label": "5", "x": 1, "y": 3.25 }, { "label": "6", "x": 2, "y": 3.25 }, - { "label": "|", "x": 4, "y": 3.25 }, + { "label": "+", "x": 3, "y": 2.25, "h": 2 }, + { "label": "1", "x": 0, "y": 4.25 }, { "label": "2", "x": 1, "y": 4.25 }, { "label": "3", "x": 2, "y": 4.25 }, - { "label": "Enter", "x": 3, "y": 4.25, "h": 2 }, - { "label": "Enter", "x": 4, "y": 4.25 }, + { "label": "0", "x": 0, "y": 5.25, "w": 2 }, { "label": ".", "x": 2, "y": 5.25 }, - { "label": ".", "x": 4, "y": 5.25 }, - { "label": "0", "x": 0, "y": 6.25 }, - { "label": "00", "x": 1, "y": 6.25 } + { "label": "Enter", "x": 3, "y": 4.25, "h": 2 } + ] + }, + "LAYOUT_ortho": { + "layout": [ + { "label": "Rotary", "x": 0.5, "y": 0 }, + { "label": "Pg Up", "x": 2, "y": 0 }, + { "label": "Pg Dn", "x": 3, "y": 0 }, + + { "label": "Layer Toggle", "x": 0, "y": 1.25 }, + { "label": "/", "x": 1, "y": 1.25 }, + { "label": "*", "x": 2, "y": 1.25 }, + { "label": "-", "x": 3, "y": 1.25 }, + + { "label": "7", "x": 0, "y": 2.25 }, + { "label": "8", "x": 1, "y": 2.25 }, + { "label": "9", "x": 2, "y": 2.25 }, + { "label": "+", "x": 3, "y": 2.25 }, + + { "label": "4", "x": 0, "y": 3.25 }, + { "label": "5", "x": 1, "y": 3.25 }, + { "label": "6", "x": 2, "y": 3.25 }, + { "label": "|", "x": 3, "y": 3.25 }, + + { "label": "1", "x": 0, "y": 4.25 }, + { "label": "2", "x": 1, "y": 4.25 }, + { "label": "3", "x": 2, "y": 4.25 }, + { "label": "Enter", "x": 3, "y": 4.25 }, + + { "label": "0", "x": 0, "y": 5.25 }, + { "label": "00", "x": 1, "y": 5.25 }, + { "label": ".", "x": 2, "y": 5.25 }, + { "label": "Enter", "x": 3, "y": 5.25 } ] } } diff --git a/keyboards/ffkeebs/puca/keymaps/default/keymap.c b/keyboards/ffkeebs/puca/keymaps/default/keymap.c index fb8a6bc7c1..12c20c0149 100644 --- a/keyboards/ffkeebs/puca/keymaps/default/keymap.c +++ b/keyboards/ffkeebs/puca/keymaps/default/keymap.c @@ -1,4 +1,4 @@ -/* Copyright 2021 Sleepdealer +/* Copyright 2021 Sleepdealer, James Young for QMK (@noroadsleft) * * This program is free software: you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -15,38 +15,26 @@ */ #include QMK_KEYBOARD_H -// 00 Functionality -enum custom_keycodes { - MC_00 = SAFE_RANGE, -}; - -bool process_record_user(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { - case MC_00: - if (record->event.pressed) { - SEND_STRING("00"); - } - break; - } - return true; -}; +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_all( + KC_MUTE, KC_PGUP, KC_PGDN, + TG(1), KC_PSLS, KC_PAST, KC_PMNS, + KC_P7, KC_P8, KC_P9, KC_PPLS, KC_PPLS, + KC_P4, KC_P5, KC_P6, KC_PIPE, + KC_P1, KC_P2, KC_P3, KC_ENTER, KC_ENTER, + KC_P0, MC_00, KC_PDOT, KC_PDOT, + KC_P0 + ), -const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - LAYOUT( - KC_MUTE, KC_PGUP, KC_PGDN, - TG(1), KC_PSLS, KC_PAST, KC_PMNS, - KC_P7, KC_P8, KC_P9, KC_PPLS, KC_PPLS, - KC_P4, KC_P5, KC_P6, KC_PIPE, - KC_P1, KC_P2, KC_P3, KC_ENTER, KC_ENTER, - KC_P0, MC_00, KC_PDOT, KC_PDOT, - KC_P0), - LAYOUT( + [1] = LAYOUT_all( KC_TRNS, RGB_HUI, RGB_VAI, - TG(1), RGB_TOG, RGB_HUD, RGB_VAD, - KC_PGUP, KC_UP, KC_PGDN, RGB_MOD, RGB_MOD, - KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, - KC_INS, KC_HOME, KC_END, RGB_RMOD, RGB_RMOD, - KC_ESC, KC_TRNS, KC_DEL, KC_TRNS, - KC_ESC) + TG(1), RGB_TOG, RGB_HUD, RGB_VAD, + KC_PGUP, KC_UP, KC_PGDN, RGB_MOD, RGB_MOD, + KC_LEFT, KC_DOWN, KC_RGHT, KC_TRNS, + KC_INS, KC_HOME, KC_END, RGB_RMOD, RGB_RMOD, + KC_ESC, KC_TRNS, KC_DEL, KC_TRNS, + KC_ESC + ), + }; diff --git a/keyboards/ffkeebs/puca/keymaps/default_numpad/keymap.c b/keyboards/ffkeebs/puca/keymaps/default_numpad/keymap.c new file mode 100644 index 0000000000..fe67678612 --- /dev/null +++ b/keyboards/ffkeebs/puca/keymaps/default_numpad/keymap.c @@ -0,0 +1,38 @@ +/* Copyright 2021 Sleepdealer, James Young for QMK (@noroadsleft) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_numpad( + KC_MUTE, KC_PGUP, KC_PGDN, + TG(1), KC_PSLS, KC_PAST, KC_PMNS, + KC_P7, KC_P8, KC_P9, + KC_P4, KC_P5, KC_P6, KC_PPLS, + KC_P1, KC_P2, KC_P3, + KC_P0, KC_PDOT, KC_ENTER + ), + + [1] = LAYOUT_numpad( + _______, RGB_HUI, RGB_VAI, + TG(1), RGB_TOG, RGB_HUD, RGB_VAD, + KC_PGUP, KC_UP, KC_PGDN, + KC_LEFT, KC_DOWN, KC_RGHT, RGB_MOD, + KC_INS, KC_HOME, KC_END, + KC_ESC, KC_DEL, RGB_RMOD + ), + +}; diff --git a/keyboards/ffkeebs/puca/keymaps/default_ortho/keymap.c b/keyboards/ffkeebs/puca/keymaps/default_ortho/keymap.c new file mode 100644 index 0000000000..e734e69745 --- /dev/null +++ b/keyboards/ffkeebs/puca/keymaps/default_ortho/keymap.c @@ -0,0 +1,38 @@ +/* Copyright 2021 Sleepdealer, James Young for QMK (@noroadsleft) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_ortho( + KC_MUTE, KC_PGUP, KC_PGDN, + TG(1), KC_PSLS, KC_PAST, KC_PMNS, + KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_P4, KC_P5, KC_P6, KC_PIPE, + KC_P1, KC_P2, KC_P3, KC_ENTER, + KC_P0, MC_00, KC_PDOT, KC_ENTER + ), + + [1] = LAYOUT_ortho( + _______, RGB_HUI, RGB_VAI, + TG(1), RGB_TOG, RGB_HUD, RGB_VAD, + KC_PGUP, KC_UP, KC_PGDN, RGB_MOD, + KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX, + KC_INS, KC_HOME, KC_END, RGB_RMOD, + KC_ESC, XXXXXXX, KC_DEL, XXXXXXX + ) + +}; diff --git a/keyboards/ffkeebs/puca/puca.c b/keyboards/ffkeebs/puca/puca.c index e08ac0cb3b..624643e8dc 100644 --- a/keyboards/ffkeebs/puca/puca.c +++ b/keyboards/ffkeebs/puca/puca.c @@ -15,6 +15,20 @@ */ #include "puca.h" +bool process_record_kb(uint16_t keycode, keyrecord_t* record) { + if (!process_record_user(keycode, record)) { + return false; + } + switch (keycode) { + case MC_00: + if (record->event.pressed) { + SEND_STRING("00"); + } + break; + } + return true; +} + bool encoder_update_kb(uint8_t index, bool clockwise) { if (!encoder_update_user(index, clockwise)) { return false; } if (clockwise) { @@ -105,7 +119,7 @@ __attribute__((weak)) void oled_task_user(void) { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }}; - + void animation_phase(void) { current_idle_frame = (current_idle_frame + 1) % IDLE_FRAMES; oled_write_raw_P(idle[abs((IDLE_FRAMES - 1) - current_idle_frame)], ANIM_SIZE); @@ -114,7 +128,7 @@ __attribute__((weak)) void oled_task_user(void) { anim_timer = timer_read32(); animation_phase(); } - + oled_set_cursor(0, 6); oled_write_P(PSTR("PUCA\nPAD\n"), false); oled_write_P(PSTR("-----\n"), false); @@ -130,4 +144,4 @@ __attribute__((weak)) void oled_task_user(void) { break; } } -#endif \ No newline at end of file +#endif diff --git a/keyboards/ffkeebs/puca/puca.h b/keyboards/ffkeebs/puca/puca.h index bc17c9f36f..ab4dc37916 100644 --- a/keyboards/ffkeebs/puca/puca.h +++ b/keyboards/ffkeebs/puca/puca.h @@ -16,26 +16,86 @@ #pragma once -// K24 is 2U Plus -// K44 is 2u Enter -// K54 is 2u 0 +#include "quantum.h" + +/* Keycodes defined here can be used by any keymap. If you wish to + * define additional keycodes for your personal keymap only, assign + * your first custom keycode to `= NEW_SAFE_RANGE`. + * + * See `process_record_kb()` in `puca.c`. + */ +enum keyboard_keycodes { + MC_00 = SAFE_RANGE, + NEW_SAFE_RANGE, +}; +#define XXX KC_NO -#include "quantum.h" +/* + * ┌───┐ ┌───┬───┐ + * │00 │ │02 │03 │ + * └───┘ └───┴───┘ + * ┌───┬───┬───┬───┐ + * │10 │11 │12 │13 │ + * ├───┼───┼───┼───┤ ┌───┐ + * │20 │21 │22 │23 │ │ │ + * ├───┼───┼───┼───┤ │24 │ 2u Plus + * │30 │31 │32 │33 │ │ │ + * ├───┼───┼───┼───┤ ├───┤ + * │40 │41 │42 │43 │ │ │ + * ├───┼───┼───┼───┤ │44 │ 2u Enter + * │50 │51 │52 │53 │ │ │ + * └───┴───┴───┴───┘ └───┘ + * ┌───────┐ + * │54 │ 2u 0 + * └───────┘ + */ + +#define LAYOUT_all( \ + K00, K02, K03, \ + K10, K11, K12, K13, \ + K20, K21, K22, K23, K24,\ + K30, K31, K32, K33, \ + K40, K41, K42, K43, K44,\ + K50, K51, K52, K53, \ + K54 \ +) { \ + { K00, XXX, K02, K03, XXX }, \ + { K10, K11, K12, K13, XXX }, \ + { K20, K21, K22, K23, K24 }, \ + { K30, K31, K32, K33, XXX }, \ + { K40, K41, K42, K43, K44 }, \ + { K50, K51, K52, K53, K54 }, \ +} + +#define LAYOUT_numpad( \ + K00, K02, K03, \ + K10, K11, K12, K13, \ + K20, K21, K22, \ + K30, K31, K32, K24, \ + K40, K41, K42, \ + K54, K52, K44 \ +) { \ + { K00, XXX, K02, K03, XXX }, \ + { K10, K11, K12, K13, XXX }, \ + { K20, K21, K22, XXX, K24 }, \ + { K30, K31, K32, XXX, XXX }, \ + { K40, K41, K42, XXX, K44 }, \ + { XXX, XXX, K52, XXX, K54 }, \ +} -#define LAYOUT( \ - K00, K02, K03, \ - K10, K11, K12, K13, \ - K20, K21, K22, K23, K24,\ - K30, K31, K32, K33, \ - K40, K41, K42, K43, K44,\ - K50, K51, K52, K53, \ - K54 \ +#define LAYOUT_ortho( \ + K00, K02, K03, \ + K10, K11, K12, K13, \ + K20, K21, K22, K23, \ + K30, K31, K32, K33, \ + K40, K41, K42, K43, \ + K50, K51, K52, K53 \ ) { \ - { K00, KC_NO, K02, K03, KC_NO }, \ - { K10, K11, K12, K13, KC_NO }, \ - { K20, K21, K22, K23, K24 }, \ - { K30, K31, K32, K33, KC_NO }, \ - { K40, K41, K42, K43, K44 }, \ - { K50, K51, K52, K53, K54 }, \ + { K00, XXX, K02, K03, XXX }, \ + { K10, K11, K12, K13, XXX }, \ + { K20, K21, K22, K23, XXX }, \ + { K30, K31, K32, K33, XXX }, \ + { K40, K41, K42, K43, XXX }, \ + { K50, K51, K52, K53, XXX }, \ } diff --git a/keyboards/ffkeebs/puca/readme.md b/keyboards/ffkeebs/puca/readme.md index ff0b2c49ae..ca4e0f93f9 100644 --- a/keyboards/ffkeebs/puca/readme.md +++ b/keyboards/ffkeebs/puca/readme.md @@ -2,7 +2,7 @@ * Keyboard Maintainer: [Sleepdealer](https://github.com/Sleepdealr) * Hardware Supported: Puca Pad -* Hardware Availability: Puca GB +* Hardware Availability: [Puca GB](https://ffkeebs.com/collections/puca) ## Bootloader diff --git a/keyboards/ffkeebs/puca/rules.mk b/keyboards/ffkeebs/puca/rules.mk index b27ecc458b..ede448ac23 100644 --- a/keyboards/ffkeebs/puca/rules.mk +++ b/keyboards/ffkeebs/puca/rules.mk @@ -19,7 +19,7 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow -ENCODER_ENABLE = yes #Rotary encoder +ENCODER_ENABLE = yes # Enable rotary encoder support +OLED_ENABLE = yes # Enable OLED support -OLED_ENABLE = yes #OLED -LTO_ENABLE = yes # Enable Link Time Optimization to reduce firmware size +LTO_ENABLE = yes # Enable Link Time Optimization to reduce firmware size From 4f764519ab3fbca7c7f2ac5a8ec5d42ae1968663 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Fri, 19 Nov 2021 06:13:05 +0000 Subject: [PATCH 525/595] Chalice: Fix QMK Configurator Implementation (#15206) --- keyboards/chalice/chalice.h | 62 ++++++++-------- keyboards/chalice/info.json | 139 ++++++++++++++++++++++++++++-------- 2 files changed, 141 insertions(+), 60 deletions(-) diff --git a/keyboards/chalice/chalice.h b/keyboards/chalice/chalice.h index a0bc0026f6..c55cd4ba0b 100644 --- a/keyboards/chalice/chalice.h +++ b/keyboards/chalice/chalice.h @@ -17,44 +17,44 @@ #pragma once -#define ____ KC_NO +#define ___ KC_NO #include "quantum.h" #define LAYOUT_default( \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, \ - K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K214, \ - K401, K402, K404, K406, K408, K410, K411, K412, K413, K314 \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K16, K46, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K26, K36, K56, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K66, K76, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K86, K96, \ + K80, K91, K82, K92, K83, K93, K84, K94, K85, K95 \ ) { \ - { K000, K002, K004, K006, K008, K010, K012 }, \ - { K001, K003, K005, K007, K009, K011, K013 }, \ - { K100, K102, K104, K106, K108, K110, K112 }, \ - { K101, K103, K105, K107, K109, K111, K113 }, \ - { K200, K202, K204, K206, K208, K210, K014 }, \ - { K201, K203, K205, K207, K209, K211, K114 }, \ - { K301, K303, K305, K307, K309, K311, K212 }, \ - { K302, K304, K306, K308, K310, K312, K213 }, \ - { K401, ____, K404, K408, K411, K413, K313 }, \ - { ____, K402, K406, K410, K412, K314, K214 } \ + { K00, K01, K02, K03, K04, K05, K06 }, \ + { K10, K11, K12, K13, K14, K15, K16 }, \ + { K20, K21, K22, K23, K24, K25, K26 }, \ + { K30, K31, K32, K33, K34, K35, K36 }, \ + { K40, K41, K42, K43, K44, K45, K46 }, \ + { K50, K51, K52, K53, K54, K55, K56 }, \ + { K60, K61, K62, K63, K64, K65, K66 }, \ + { K70, K71, K72, K73, K74, K75, K76 }, \ + { K80, ___, K82, K83, K84, K85, K86 }, \ + { ___, K91, K92, K93, K94, K95, K96 } \ } #define LAYOUT_split_bs( \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K403, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, \ - K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K214, \ - K401, K402, K404, K406, K408, K410, K411, K412, K413, K314 \ + K00, K10, K01, K11, K02, K12, K03, K13, K04, K14, K05, K15, K06, K16, K46, K81, \ + K20, K30, K21, K31, K22, K32, K23, K33, K24, K34, K25, K35, K26, K36, K56, \ + K40, K50, K41, K51, K42, K52, K43, K53, K44, K54, K45, K55, K66, K76, \ + K60, K70, K61, K71, K62, K72, K63, K73, K64, K74, K65, K75, K86, K96, \ + K80, K91, K82, K92, K83, K93, K84, K94, K85, K95 \ ) { \ - { K000, K002, K004, K006, K008, K010, K012 }, \ - { K001, K003, K005, K007, K009, K011, K013 }, \ - { K100, K102, K104, K106, K108, K110, K112 }, \ - { K101, K103, K105, K107, K109, K111, K113 }, \ - { K200, K202, K204, K206, K208, K210, K014 }, \ - { K201, K203, K205, K207, K209, K211, K114 }, \ - { K301, K303, K305, K307, K309, K311, K212 }, \ - { K302, K304, K306, K308, K310, K312, K213 }, \ - { K401, K403, K404, K408, K411, K413, K313 }, \ - { ____, K402, K406, K410, K412, K314, K214 } \ + { K00, K01, K02, K03, K04, K05, K06 }, \ + { K10, K11, K12, K13, K14, K15, K16 }, \ + { K20, K21, K22, K23, K24, K25, K26 }, \ + { K30, K31, K32, K33, K34, K35, K36 }, \ + { K40, K41, K42, K43, K44, K45, K46 }, \ + { K50, K51, K52, K53, K54, K55, K56 }, \ + { K60, K61, K62, K63, K64, K65, K66 }, \ + { K70, K71, K72, K73, K74, K75, K76 }, \ + { K80, K81, K82, K83, K84, K85, K86 }, \ + { ___, K91, K92, K93, K94, K95, K96 } \ } diff --git a/keyboards/chalice/info.json b/keyboards/chalice/info.json index 68bd710a37..77a3f7bc12 100644 --- a/keyboards/chalice/info.json +++ b/keyboards/chalice/info.json @@ -1,25 +1,27 @@ { "keyboard_name": "Chalice", "url": "https://customkbd.com/products/chalice-pre-order", - "maintainer": "CustomKBD", + "maintainer": "joshajohnson, CustomKBD", "layouts": { "LAYOUT_default": { "layout": [ {"label":"Esc", "x":0, "y":0}, - {"label":"~", "x":1.5, "y":0}, - {"label":"!", "x":2.5, "y":0}, - {"label":"@", "x":3.5, "y":0}, - {"label":"#", "x":4.5, "y":0}, - {"label":"$", "x":5.5, "y":0}, - {"label":"%", "x":6.5, "y":0}, - {"label":"^", "x":7.5, "y":0}, - {"label":"&", "x":10.5, "y":0}, - {"label":"*", "x":11.5, "y":0}, - {"label":"(", "x":12.5, "y":0}, - {"label":")", "x":13.5, "y":0}, - {"label":"_", "x":14.5, "y":0}, - {"label":"+", "x":15.5, "y":0}, + {"label":"`~", "x":1.5, "y":0}, + {"label":"1!", "x":2.5, "y":0}, + {"label":"2@", "x":3.5, "y":0}, + {"label":"3#", "x":4.5, "y":0}, + {"label":"4$", "x":5.5, "y":0}, + {"label":"5%", "x":6.5, "y":0}, + {"label":"6^", "x":7.5, "y":0}, + {"label":"7&", "x":10.5, "y":0}, + {"label":"8*", "x":11.5, "y":0}, + {"label":"9(", "x":12.5, "y":0}, + {"label":"0)", "x":13.5, "y":0}, + {"label":"-_", "x":14.5, "y":0}, + {"label":"=+", "x":15.5, "y":0}, {"label":"Backspace", "x":16.5, "y":0, "w":2}, + + {"label":"Insert", "x":0, "y":1}, {"label":"Tab", "x":1.5, "y":1, "w":1.5}, {"label":"Q", "x":3, "y":1}, {"label":"W", "x":4, "y":1}, @@ -31,10 +33,10 @@ {"label":"I", "x":12, "y":1}, {"label":"O", "x":13, "y":1}, {"label":"P", "x":14, "y":1}, - {"label":"{", "x":15, "y":1}, - {"label":"}", "x":16, "y":1}, - {"label":"|", "x":17, "y":1, "w":1.5}, - {"label":"Mute", "x":19, "y":0.5}, + {"label":"[{", "x":15, "y":1}, + {"label":"]}", "x":16, "y":1}, + {"label":"\\|", "x":17, "y":1, "w":1.5}, + {"label":"Delete", "x":0, "y":2}, {"label":"Caps Lock", "x":1.5, "y":2, "w":1.75}, {"label":"A", "x":3.25, "y":2}, @@ -46,9 +48,10 @@ {"label":"J", "x":11.25, "y":2}, {"label":"K", "x":12.25, "y":2}, {"label":"L", "x":13.25, "y":2}, - {"label":":", "x":14.25, "y":2}, - {"label":"\"", "x":15.25, "y":2}, + {"label":";:", "x":14.25, "y":2}, + {"label":"'\"", "x":15.25, "y":2}, {"label":"Enter", "x":16.25, "y":2, "w":2.25}, + {"label":"Shift", "x":1.5, "y":3, "w":2.25}, {"label":"Z", "x":3.75, "y":3}, {"label":"X", "x":4.75, "y":3}, @@ -58,21 +61,99 @@ {"label":"B", "x":9.75, "y":3}, {"label":"N", "x":10.75, "y":3}, {"label":"M", "x":11.75, "y":3}, - {"label":"<", "x":12.75, "y":3}, - {"label":">", "x":13.75, "y":3}, - {"label":"?", "x":14.75, "y":3}, + {"label":",<", "x":12.75, "y":3}, + {"label":".>", "x":13.75, "y":3}, + {"label":"/?", "x":14.75, "y":3}, {"label":"Shift", "x":15.75, "y":3, "w":1.75}, - {"label":"Up", "x":17.75, "y":3.25}, + {"label":"Up", "x":17.5, "y":3}, + {"label":"Ctrl", "x":1.5, "y":4, "w":1.5}, {"label":"Alt", "x":4.5, "y":4, "w":1.5}, - {"label":"Space", "x":6, "y":4, "w":2}, - {"label":"Fn", "x":8, "y":4}, + {"label":"Space", "x":6, "y":4, "w":2.25}, + {"label":"Fn", "x":8.25, "y":4}, {"label":"Space", "x":9.75, "y":4, "w":2.75}, {"label":"Alt", "x":12.5, "y":4, "w":1.5}, {"label":"Ctrl", "x":15, "y":4, "w":1.5}, - {"label":"Left", "x":16.75, "y":4.25}, - {"label":"Down", "x":17.75, "y":4.25}, - {"label":"Right", "x":18.75, "y":4.25} + {"label":"Left", "x":16.5, "y":4}, + {"label":"Down", "x":17.5, "y":4}, + {"label":"Right", "x":18.5, "y":4} + ] + }, + "LAYOUT_split_bs": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"`~", "x":1.5, "y":0}, + {"label":"1!", "x":2.5, "y":0}, + {"label":"2@", "x":3.5, "y":0}, + {"label":"3#", "x":4.5, "y":0}, + {"label":"4$", "x":5.5, "y":0}, + {"label":"5%", "x":6.5, "y":0}, + {"label":"6^", "x":7.5, "y":0}, + {"label":"7&", "x":10.5, "y":0}, + {"label":"8*", "x":11.5, "y":0}, + {"label":"9(", "x":12.5, "y":0}, + {"label":"0)", "x":13.5, "y":0}, + {"label":"-_", "x":14.5, "y":0}, + {"label":"=+", "x":15.5, "y":0}, + {"label":"Backspace", "x":16.5, "y":0}, + {"label":"Backspace", "x":17.5, "y":0}, + + {"label":"Insert", "x":0, "y":1}, + {"label":"Tab", "x":1.5, "y":1, "w":1.5}, + {"label":"Q", "x":3, "y":1}, + {"label":"W", "x":4, "y":1}, + {"label":"E", "x":5, "y":1}, + {"label":"R", "x":6, "y":1}, + {"label":"T", "x":7, "y":1}, + {"label":"Y", "x":10, "y":1}, + {"label":"U", "x":11, "y":1}, + {"label":"I", "x":12, "y":1}, + {"label":"O", "x":13, "y":1}, + {"label":"P", "x":14, "y":1}, + {"label":"[{", "x":15, "y":1}, + {"label":"]}", "x":16, "y":1}, + {"label":"\\|", "x":17, "y":1, "w":1.5}, + + {"label":"Delete", "x":0, "y":2}, + {"label":"Caps Lock", "x":1.5, "y":2, "w":1.75}, + {"label":"A", "x":3.25, "y":2}, + {"label":"S", "x":4.25, "y":2}, + {"label":"D", "x":5.25, "y":2}, + {"label":"F", "x":6.25, "y":2}, + {"label":"G", "x":7.25, "y":2}, + {"label":"H", "x":10.25, "y":2}, + {"label":"J", "x":11.25, "y":2}, + {"label":"K", "x":12.25, "y":2}, + {"label":"L", "x":13.25, "y":2}, + {"label":";:", "x":14.25, "y":2}, + {"label":"'\"", "x":15.25, "y":2}, + {"label":"Enter", "x":16.25, "y":2, "w":2.25}, + + {"label":"Shift", "x":1.5, "y":3, "w":2.25}, + {"label":"Z", "x":3.75, "y":3}, + {"label":"X", "x":4.75, "y":3}, + {"label":"C", "x":5.75, "y":3}, + {"label":"V", "x":6.75, "y":3}, + {"label":"B", "x":7.75, "y":3}, + {"label":"B", "x":9.75, "y":3}, + {"label":"N", "x":10.75, "y":3}, + {"label":"M", "x":11.75, "y":3}, + {"label":",<", "x":12.75, "y":3}, + {"label":".>", "x":13.75, "y":3}, + {"label":"/?", "x":14.75, "y":3}, + {"label":"Shift", "x":15.75, "y":3, "w":1.75}, + {"label":"Up", "x":17.5, "y":3}, + + {"label":"Ctrl", "x":1.5, "y":4, "w":1.5}, + {"label":"Alt", "x":4.5, "y":4, "w":1.5}, + {"label":"Space", "x":6, "y":4, "w":2.25}, + {"label":"Fn", "x":8.25, "y":4}, + {"label":"Space", "x":9.75, "y":4, "w":2.75}, + {"label":"Alt", "x":12.5, "y":4, "w":1.5}, + {"label":"Ctrl", "x":15, "y":4, "w":1.5}, + {"label":"Left", "x":16.5, "y":4}, + {"label":"Down", "x":17.5, "y":4}, + {"label":"Right", "x":18.5, "y":4} ] } } From 58e7527e602395b0e90ed2560c390c3a6b493db2 Mon Sep 17 00:00:00 2001 From: Kyle Gieselman <57047887+kgieselman@users.noreply.github.com> Date: Fri, 19 Nov 2021 11:02:19 -0500 Subject: [PATCH 526/595] [Keyboard] Add MTBKeys MTB60 Keyboard (Solderable and Hotswap edition) (#14222) Co-authored-by: Ryan <fauxpark@gmail.com> --- keyboards/mtbkeys/mtb60/hotswap/config.h | 79 +++++++++++++++++++ keyboards/mtbkeys/mtb60/hotswap/hotswap.c | 17 ++++ keyboards/mtbkeys/mtb60/hotswap/hotswap.h | 33 ++++++++ keyboards/mtbkeys/mtb60/hotswap/info.json | 72 +++++++++++++++++ .../mtb60/hotswap/keymaps/default/keymap.c | 39 +++++++++ keyboards/mtbkeys/mtb60/hotswap/readme.md | 26 ++++++ keyboards/mtbkeys/mtb60/hotswap/rules.mk | 21 +++++ keyboards/mtbkeys/mtb60/solder/config.h | 79 +++++++++++++++++++ keyboards/mtbkeys/mtb60/solder/info.json | 75 ++++++++++++++++++ .../mtb60/solder/keymaps/default/keymap.c | 40 ++++++++++ keyboards/mtbkeys/mtb60/solder/readme.md | 26 ++++++ keyboards/mtbkeys/mtb60/solder/rules.mk | 21 +++++ keyboards/mtbkeys/mtb60/solder/solder.c | 17 ++++ keyboards/mtbkeys/mtb60/solder/solder.h | 33 ++++++++ 14 files changed, 578 insertions(+) create mode 100644 keyboards/mtbkeys/mtb60/hotswap/config.h create mode 100644 keyboards/mtbkeys/mtb60/hotswap/hotswap.c create mode 100644 keyboards/mtbkeys/mtb60/hotswap/hotswap.h create mode 100644 keyboards/mtbkeys/mtb60/hotswap/info.json create mode 100644 keyboards/mtbkeys/mtb60/hotswap/keymaps/default/keymap.c create mode 100644 keyboards/mtbkeys/mtb60/hotswap/readme.md create mode 100644 keyboards/mtbkeys/mtb60/hotswap/rules.mk create mode 100644 keyboards/mtbkeys/mtb60/solder/config.h create mode 100644 keyboards/mtbkeys/mtb60/solder/info.json create mode 100644 keyboards/mtbkeys/mtb60/solder/keymaps/default/keymap.c create mode 100644 keyboards/mtbkeys/mtb60/solder/readme.md create mode 100644 keyboards/mtbkeys/mtb60/solder/rules.mk create mode 100644 keyboards/mtbkeys/mtb60/solder/solder.c create mode 100644 keyboards/mtbkeys/mtb60/solder/solder.h diff --git a/keyboards/mtbkeys/mtb60/hotswap/config.h b/keyboards/mtbkeys/mtb60/hotswap/config.h new file mode 100644 index 0000000000..6cfc312243 --- /dev/null +++ b/keyboards/mtbkeys/mtb60/hotswap/config.h @@ -0,0 +1,79 @@ +/* +Copyright 2021 MTBKeys + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x0001 +#define DEVICE_VER 0x0001 +#define MANUFACTURER MTBKeys +#define PRODUCT honeyboard60 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* key matrix pinout */ +#define MATRIX_ROW_PINS { D6, D7, B4, B5, D5 } +#define MATRIX_COL_PINS { D0, D1, D2, D3, B7, B6, F7, C6, C7, F6, F4, F1, F0, F5, E6 } +#define UNUSED_PINS + +/* diode direction: COL2ROW or ROW2COL */ +#define DIODE_DIRECTION ROW2COL + +/* Pin WS2812 RGB LEDs are connected to */ +#define RGB_DI_PIN D4 + +#ifdef RGB_DI_PIN +# define RGBLED_NUM 16 +# define RGBLIGHT_HUE_STEP 8 +# define RGBLIGHT_SAT_STEP 8 +# define RGBLIGHT_VAL_STEP 8 +# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +# define RGBLIGHT_SLEEP /* Turn RGB light off when the host goes to sleep */ +# define RGBLIGHT_EFFECT_ALTERNATING +# define RGBLIGHT_EFFECT_BREATHING +# define RGBLIGHT_EFFECT_CHRISTMAS +# define RGBLIGHT_EFFECT_KNIGHT +# define RGBLIGHT_EFFECT_RAINBOW_MOOD +# define RGBLIGHT_EFFECT_RAINBOW_SWIRL +# define RGBLIGHT_EFFECT_RGB_TEST +# define RGBLIGHT_EFFECT_SNAKE +# define RGBLIGHT_EFFECT_STATIC_GRADIENT +# define RGBLIGHT_EFFECT_TWINKLE +# define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_SWIRL /* Set default RGB */ +#endif /* RGB_DI_PIN */ + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +#define BOOTMAGIC_LITE_ROW 0 +#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/mtbkeys/mtb60/hotswap/hotswap.c b/keyboards/mtbkeys/mtb60/hotswap/hotswap.c new file mode 100644 index 0000000000..f23de6af54 --- /dev/null +++ b/keyboards/mtbkeys/mtb60/hotswap/hotswap.c @@ -0,0 +1,17 @@ +/* Copyright 2021 MTBKeys + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "hotswap.h" diff --git a/keyboards/mtbkeys/mtb60/hotswap/hotswap.h b/keyboards/mtbkeys/mtb60/hotswap/hotswap.h new file mode 100644 index 0000000000..7dae44b5da --- /dev/null +++ b/keyboards/mtbkeys/mtb60/hotswap/hotswap.h @@ -0,0 +1,33 @@ +/* Copyright 2021 MTBKeys + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +#define LAYOUT( \ + k00, k10, k20, k30, k40, k50, k60, k70, k80, k90, ka0, kb0, kc0, ke0, \ + k11, k21, k31, k41, k51, k61, k71, k81, k91, ka1, kb1, kc1, kd1, ke1, \ + k02, k22, k32, k42, k52, k62, k72, k82, k92, ka2, kb2, kc2, kd2, \ + k03, k23, k33, k43, k53, k63, k73, k83, k93, ka3, kb3, kd3, \ + k04, k14, k24, k64, ka4, kb4, kd4, ke4 \ +) { \ + { k00, k10, k20, k30, k40, k50, k60, k70, k80, k90, ka0, kb0, kc0, KC_NO, ke0 }, \ + { KC_NO, k11, k21, k31, k41, k51, k61, k71, k81, k91, ka1, kb1, kc1, kd1, ke1 }, \ + { k02, KC_NO, k22, k32, k42, k52, k62, k72, k82, k92, ka2, kb2, kc2, kd2, KC_NO }, \ + { k03, KC_NO, k23, k33, k43, k53, k63, k73, k83, k93, ka3, kb3, KC_NO, kd3, KC_NO }, \ + { k04, k14, k24, KC_NO, KC_NO, KC_NO, k64, KC_NO, KC_NO, KC_NO, ka4, kb4, kd4, KC_NO, ke4 } \ +} diff --git a/keyboards/mtbkeys/mtb60/hotswap/info.json b/keyboards/mtbkeys/mtb60/hotswap/info.json new file mode 100644 index 0000000000..5718d70507 --- /dev/null +++ b/keyboards/mtbkeys/mtb60/hotswap/info.json @@ -0,0 +1,72 @@ +{ + "keyboard_name": "MTB60", + "url": "mtbkeys.com", + "maintainer": "MTBKeys", + "layouts": { + "LAYOUT_all": { + "layout": [ + {"label": "Esc" , "x": 0, "y": 0 }, + {"label": "!" , "x": 1, "y": 0 }, + {"label": "@" , "x": 2, "y": 0 }, + {"label": "#" , "x": 3, "y": 0 }, + {"label": "$" , "x": 4, "y": 0 }, + {"label": "%" , "x": 5, "y": 0 }, + {"label": "^" , "x": 6, "y": 0 }, + {"label": "&" , "x": 7, "y": 0 }, + {"label": "*" , "x": 8, "y": 0 }, + {"label": "(" , "x": 9, "y": 0 }, + {"label": ")" , "x": 10, "y": 0 }, + {"label": "_" , "x": 11, "y": 0 }, + {"label": "+" , "x": 12, "y": 0 }, + {"label": "Back Space", "x": 13, "y": 0, "w": 2}, + {"label": "Tab", "x": 0 , "y": 1, "w": 1.5}, + {"label": "Q" , "x": 1.5, "y": 1 }, + {"label": "W" , "x": 2.5, "y": 1 }, + {"label": "E" , "x": 3.5, "y": 1 }, + {"label": "R" , "x": 4.5, "y": 1 }, + {"label": "T" , "x": 5.5, "y": 1 }, + {"label": "Y" , "x": 6.5, "y": 1 }, + {"label": "U" , "x": 7.5, "y": 1 }, + {"label": "I" , "x": 8.5, "y": 1 }, + {"label": "O" , "x": 9.5, "y": 1 }, + {"label": "P" , "x": 10.5, "y": 1 }, + {"label": "{" , "x": 11.5, "y": 1 }, + {"label": "}" , "x": 12.5, "y": 1 }, + {"label": "|" , "x": 13.5, "y": 1, "w": 1.5}, + {"label": "Caps Lock", "x": 0 , "y": 2, "w": 1.75}, + {"label": "A" , "x": 1.75, "y": 2 }, + {"label": "S" , "x": 2.75, "y": 2 }, + {"label": "D" , "x": 3.75, "y": 2 }, + {"label": "F" , "x": 4.75, "y": 2 }, + {"label": "G" , "x": 5.75, "y": 2 }, + {"label": "H" , "x": 6.75, "y": 2 }, + {"label": "J" , "x": 7.75, "y": 2 }, + {"label": "K" , "x": 8.75, "y": 2 }, + {"label": "L" , "x": 9.75, "y": 2 }, + {"label": ":" , "x": 10.75, "y": 2 }, + {"label": "\"" , "x": 11.75, "y": 2 }, + {"label": "Enter" , "x": 12.75, "y": 2, "w": 2.25}, + {"label": "Left Shift" , "x": 0 , "y": 3, "w": 2.25}, + {"label": "Z" , "x": 2.25, "y": 3 }, + {"label": "X" , "x": 3.25, "y": 3 }, + {"label": "C" , "x": 4.25, "y": 3 }, + {"label": "V" , "x": 5.25, "y": 3 }, + {"label": "B" , "x": 6.25, "y": 3 }, + {"label": "N" , "x": 7.25, "y": 3 }, + {"label": "M" , "x": 8.25, "y": 3 }, + {"label": "<" , "x": 9.25, "y": 3 }, + {"label": ">" , "x": 10.25, "y": 3 }, + {"label": "?" , "x": 11.25, "y": 3 }, + {"label": "Right Shift", "x": 12.25, "y": 3, "w": 2.75}, + {"label": "Left Ctrl" , "x": 0 , "y": 4, "w": 1.25}, + {"label": "GUI" , "x": 1.25, "y": 4, "w": 1.25}, + {"label": "Left Alt" , "x": 2.5 , "y": 4, "w": 1.25}, + {"label": "Space" , "x": 3.75, "y": 4, "w": 6.25}, + {"label": "Right Ctrl", "x": 10 , "y": 4, "w": 1.25}, + {"label": "GUI" , "x": 11.25, "y": 4, "w": 1.25}, + {"label": "MO(1)" , "x": 12.5 , "y": 4, "w": 1.25}, + {"label": "Right Ctrl", "x": 13.75, "y": 4, "w": 1.25} + ] + } + } +} diff --git a/keyboards/mtbkeys/mtb60/hotswap/keymaps/default/keymap.c b/keyboards/mtbkeys/mtb60/hotswap/keymaps/default/keymap.c new file mode 100644 index 0000000000..648c8201f5 --- /dev/null +++ b/keyboards/mtbkeys/mtb60/hotswap/keymaps/default/keymap.c @@ -0,0 +1,39 @@ +/* Copyright 2021 MTBKeys + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, ///< Default Layer + _FN ///< Function Layer +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [_BASE] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(_FN), KC_RCTL + ), + [_FN] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, + _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, RGB_TOG + ) +}; diff --git a/keyboards/mtbkeys/mtb60/hotswap/readme.md b/keyboards/mtbkeys/mtb60/hotswap/readme.md new file mode 100644 index 0000000000..7afa26bbd4 --- /dev/null +++ b/keyboards/mtbkeys/mtb60/hotswap/readme.md @@ -0,0 +1,26 @@ +# MTB60 (Hotswap Edition) + +## Details + +* Keyboard Maintainer: [MTBKeys](https://mtbkeys.com/) +* Hardware Supported: MTB60 PCB (Hotswap edition) +* Hardware Availability: [HB60 on MTBKeys Website](https://mtbkeys.com/) + +## Building Firmware + +Make example for this keyboard (after setting up your build environment): + + make mtbkeys/mtb60/hotswap:default + +Flashing example for this keyboard: + + make mtbkeys/mtb60/hotswap:default:flash + +## Bootloader + +Enter the bootloader in 2 ways: + +1. **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +2. **Physical reset button**: Briefly press the button on the back of the PCB + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/mtbkeys/mtb60/hotswap/rules.mk b/keyboards/mtbkeys/mtb60/hotswap/rules.mk new file mode 100644 index 0000000000..02ae236709 --- /dev/null +++ b/keyboards/mtbkeys/mtb60/hotswap/rules.mk @@ -0,0 +1,21 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/mtbkeys/mtb60/solder/config.h b/keyboards/mtbkeys/mtb60/solder/config.h new file mode 100644 index 0000000000..02037e83df --- /dev/null +++ b/keyboards/mtbkeys/mtb60/solder/config.h @@ -0,0 +1,79 @@ +/* +Copyright 2021 MTBKeys + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x0000 +#define DEVICE_VER 0x0001 +#define MANUFACTURER MTBKeys +#define PRODUCT MTB60 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* key matrix pinout */ +#define MATRIX_ROW_PINS { D0, D1, F4, F1, D2 } +#define MATRIX_COL_PINS { E6, F0, F5, F6, F7, D5, D3, C7, C6, B6, B5, B4, D7, D6, D4 } +#define UNUSED_PINS + +/* diode direction: COL2ROW or ROW2COL */ +#define DIODE_DIRECTION ROW2COL + +/* Pin WS2812 RGB LEDs are connected to */ +#define RGB_DI_PIN B0 + +#ifdef RGB_DI_PIN +# define RGBLED_NUM 16 +# define RGBLIGHT_HUE_STEP 8 +# define RGBLIGHT_SAT_STEP 8 +# define RGBLIGHT_VAL_STEP 8 +# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +# define RGBLIGHT_SLEEP /* Turn RGB light off when the host goes to sleep */ +# define RGBLIGHT_EFFECT_ALTERNATING +# define RGBLIGHT_EFFECT_BREATHING +# define RGBLIGHT_EFFECT_CHRISTMAS +# define RGBLIGHT_EFFECT_KNIGHT +# define RGBLIGHT_EFFECT_RAINBOW_MOOD +# define RGBLIGHT_EFFECT_RAINBOW_SWIRL +# define RGBLIGHT_EFFECT_RGB_TEST +# define RGBLIGHT_EFFECT_SNAKE +# define RGBLIGHT_EFFECT_STATIC_GRADIENT +# define RGBLIGHT_EFFECT_TWINKLE +# define RGBLIGHT_DEFAULT_MODE RGBLIGHT_MODE_RAINBOW_SWIRL /* Set default RGB */ +#endif /* RGB_DI_PIN */ + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE + +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +#define BOOTMAGIC_LITE_ROW 0 +#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/mtbkeys/mtb60/solder/info.json b/keyboards/mtbkeys/mtb60/solder/info.json new file mode 100644 index 0000000000..e60d3eee2f --- /dev/null +++ b/keyboards/mtbkeys/mtb60/solder/info.json @@ -0,0 +1,75 @@ +{ + "keyboard_name": "MTB60", + "url": "mtbkeys.com", + "maintainer": "MTBKeys", + "layouts": { + "LAYOUT_all": { + "layout": [ + {"label": "Esc" , "x": 0, "y": 0}, + {"label": "!" , "x": 1, "y": 0}, + {"label": "@" , "x": 2, "y": 0}, + {"label": "#" , "x": 3, "y": 0}, + {"label": "$" , "x": 4, "y": 0}, + {"label": "%" , "x": 5, "y": 0}, + {"label": "^" , "x": 6, "y": 0}, + {"label": "&" , "x": 7, "y": 0}, + {"label": "*" , "x": 8, "y": 0}, + {"label": "(" , "x": 9, "y": 0}, + {"label": ")" , "x": 10, "y": 0}, + {"label": "_" , "x": 11, "y": 0}, + {"label": "+" , "x": 12, "y": 0}, + {"label": "Back Space", "x": 13, "y": 0}, + {"label": "Delete" , "x": 14, "y": 0}, + {"label": "Tab", "x": 0 , "y": 1, "w": 1.5}, + {"label": "Q" , "x": 1.5, "y": 1 }, + {"label": "W" , "x": 2.5, "y": 1 }, + {"label": "E" , "x": 3.5, "y": 1 }, + {"label": "R" , "x": 4.5, "y": 1 }, + {"label": "T" , "x": 5.5, "y": 1 }, + {"label": "Y" , "x": 6.5, "y": 1 }, + {"label": "U" , "x": 7.5, "y": 1 }, + {"label": "I" , "x": 8.5, "y": 1 }, + {"label": "O" , "x": 9.5, "y": 1 }, + {"label": "P" , "x": 10.5, "y": 1 }, + {"label": "{" , "x": 11.5, "y": 1 }, + {"label": "}" , "x": 12.5, "y": 1 }, + {"label": "|" , "x": 13.5, "y": 1, "w": 1.5}, + {"label": "Caps Lock", "x": 0 , "y": 2, "w": 1.75}, + {"label": "A" , "x": 1.75, "y": 2 }, + {"label": "S" , "x": 2.75, "y": 2 }, + {"label": "D" , "x": 3.75, "y": 2 }, + {"label": "F" , "x": 4.75, "y": 2 }, + {"label": "G" , "x": 5.75, "y": 2 }, + {"label": "H" , "x": 6.75, "y": 2 }, + {"label": "J" , "x": 7.75, "y": 2 }, + {"label": "K" , "x": 8.75, "y": 2 }, + {"label": "L" , "x": 9.75, "y": 2 }, + {"label": ":" , "x": 10.75, "y": 2 }, + {"label": "\"" , "x": 11.75, "y": 2 }, + {"label": "Enter" , "x": 12.75, "y": 2, "w": 2.25}, + {"label": "Left Shift" , "x": 0 , "y": 3, "w": 2.25}, + {"label": "Z" , "x": 2.25, "y": 3 }, + {"label": "X" , "x": 3.25, "y": 3 }, + {"label": "C" , "x": 4.25, "y": 3 }, + {"label": "V" , "x": 5.25, "y": 3 }, + {"label": "B" , "x": 6.25, "y": 3 }, + {"label": "N" , "x": 7.25, "y": 3 }, + {"label": "M" , "x": 8.25, "y": 3 }, + {"label": "<" , "x": 9.25, "y": 3 }, + {"label": ">" , "x": 10.25, "y": 3 }, + {"label": "?" , "x": 11.25, "y": 3 }, + {"label": "Right Shift", "x": 12.25, "y": 3, "w": 2.75}, + {"label": "Left Ctrl" , "x": 0 , "y": 4, "w": 1.25}, + {"label": "GUI" , "x": 1.25, "y": 4, "w": 1.25}, + {"label": "Left Alt" , "x": 2.5 , "y": 4, "w": 1.25}, + {"label": "Space" , "x": 3.75, "y": 4, "w": 2.25}, + {"label": "Space" , "x": 6 , "y": 4, "w": 1.25}, + {"label": "Space" , "x": 7.25, "y": 4, "w": 2.75}, + {"label": "Right Ctrl", "x": 10 , "y": 4, "w": 1.25}, + {"label": "GUI" , "x": 11.25, "y": 4, "w": 1.25}, + {"label": "MO(1)" , "x": 12.5 , "y": 4, "w": 1.25}, + {"label": "Right Ctrl", "x": 13.75, "y": 4, "w": 1.25} + ] + } + } +} diff --git a/keyboards/mtbkeys/mtb60/solder/keymaps/default/keymap.c b/keyboards/mtbkeys/mtb60/solder/keymaps/default/keymap.c new file mode 100644 index 0000000000..6ed34b6432 --- /dev/null +++ b/keyboards/mtbkeys/mtb60/solder/keymaps/default/keymap.c @@ -0,0 +1,40 @@ +/* Copyright 2021 MTBKeys + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [_BASE] = LAYOUT( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RGUI, MO(_FN), KC_RGUI, KC_RCTL + ), + [_FN] = LAYOUT( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, + _______, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/mtbkeys/mtb60/solder/readme.md b/keyboards/mtbkeys/mtb60/solder/readme.md new file mode 100644 index 0000000000..adaa94244f --- /dev/null +++ b/keyboards/mtbkeys/mtb60/solder/readme.md @@ -0,0 +1,26 @@ +# MTB60 (Solder Edition) + +## Details + +* Keyboard Maintainer: [MTBKeys](https://mtbkeys.com/) +* Hardware Supported: MTB60 PCB (Solder edition) +* Hardware Availability: [HB60 on MTBKeys Website](https://mtbkeys.com/) + +## Building Firmware + +Make example for this keyboard (after setting up your build environment): + + make mtbkeys/mtb60/solder:default + +Flashing example for this keyboard: + + make mtbkeys/mtb60/solder:default:flash + +## Bootloader + +Enter the bootloader in 2 ways: + +1. **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard +2. **Physical reset button**: Briefly press the button on the back of the PCB + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/mtbkeys/mtb60/solder/rules.mk b/keyboards/mtbkeys/mtb60/solder/rules.mk new file mode 100644 index 0000000000..33e1763375 --- /dev/null +++ b/keyboards/mtbkeys/mtb60/solder/rules.mk @@ -0,0 +1,21 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/mtbkeys/mtb60/solder/solder.c b/keyboards/mtbkeys/mtb60/solder/solder.c new file mode 100644 index 0000000000..9bb7f2b98e --- /dev/null +++ b/keyboards/mtbkeys/mtb60/solder/solder.c @@ -0,0 +1,17 @@ +/* Copyright 2021 MTBKeys + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "solder.h" diff --git a/keyboards/mtbkeys/mtb60/solder/solder.h b/keyboards/mtbkeys/mtb60/solder/solder.h new file mode 100644 index 0000000000..31756e7af7 --- /dev/null +++ b/keyboards/mtbkeys/mtb60/solder/solder.h @@ -0,0 +1,33 @@ +/* Copyright 2021 MTBKeys + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +#define LAYOUT( \ + k00, k10, k20, k30, k40, k50, k60, k70, k80, k90, ka0, kb0, kc0, kd0, ke0, \ + k11, k21, k31, k41, k51, k61, k71, k81, k91, ka1, kb1, kc1, kd1, ke1, \ + k02, k22, k32, k42, k52, k62, k72, k82, k92, ka2, kb2, kc2, kd2, \ + k03, k13, k23, k33, k43, k53, k63, k73, k83, k93, ka3, kb3, kc3, kd3, ke3, \ + k04, k14, k34, k44, k64, k84, ka4, kb4, kc4, kd4, ke4 \ +) { \ + { k00, k10, k20, k30, k40, k50, k60, k70, k80, k90, ka0, kb0, kc0, kd0, ke0 }, \ + { KC_NO, k11, k21, k31, k41, k51, k61, k71, k81, k91, ka1, kb1, kc1, kd1, ke1 }, \ + { k02, KC_NO, k22, k32, k42, k52, k62, k72, k82, k92, ka2, kb2, kc2, kd2, KC_NO }, \ + { k03, k13, k23, k33, k43, k53, k63, k73, k83, k93, ka3, kb3, kc3, kd3, ke3 }, \ + { k04, k14, KC_NO, k34, k44, KC_NO, k64, KC_NO, k84, KC_NO, ka4, kb4, kc4, kd4, ke4 } \ +} From 10c36032a075258516f30da79949a755d67a53a2 Mon Sep 17 00:00:00 2001 From: Callum Hart <mini-ninja-64@users.noreply.github.com> Date: Fri, 19 Nov 2021 17:41:12 +0000 Subject: [PATCH 527/595] [Keyboard] Add Keebcats Dougal PCB (#15168) --- keyboards/cutie_club/keebcats/dougal/config.h | 50 +++++++++++ keyboards/cutie_club/keebcats/dougal/dougal.c | 17 ++++ keyboards/cutie_club/keebcats/dougal/dougal.h | 34 ++++++++ .../cutie_club/keebcats/dougal/info.json | 84 +++++++++++++++++++ .../keebcats/dougal/keymaps/default/keymap.c | 28 +++++++ .../keebcats/dougal/keymaps/via/keymap.c | 49 +++++++++++ .../keebcats/dougal/keymaps/via/rules.mk | 1 + .../cutie_club/keebcats/dougal/readme.md | 18 ++++ keyboards/cutie_club/keebcats/dougal/rules.mk | 21 +++++ 9 files changed, 302 insertions(+) create mode 100644 keyboards/cutie_club/keebcats/dougal/config.h create mode 100644 keyboards/cutie_club/keebcats/dougal/dougal.c create mode 100644 keyboards/cutie_club/keebcats/dougal/dougal.h create mode 100644 keyboards/cutie_club/keebcats/dougal/info.json create mode 100644 keyboards/cutie_club/keebcats/dougal/keymaps/default/keymap.c create mode 100644 keyboards/cutie_club/keebcats/dougal/keymaps/via/keymap.c create mode 100644 keyboards/cutie_club/keebcats/dougal/keymaps/via/rules.mk create mode 100644 keyboards/cutie_club/keebcats/dougal/readme.md create mode 100644 keyboards/cutie_club/keebcats/dougal/rules.mk diff --git a/keyboards/cutie_club/keebcats/dougal/config.h b/keyboards/cutie_club/keebcats/dougal/config.h new file mode 100644 index 0000000000..05160322c4 --- /dev/null +++ b/keyboards/cutie_club/keebcats/dougal/config.h @@ -0,0 +1,50 @@ +/* Copyright 2021 Cutie Club + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFB9C +#define PRODUCT_ID 0xB265 +#define DEVICE_VER 0x0000 +#define MANUFACTURER Cutie Club +#define PRODUCT Keebcats Dougal 65% + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 16 + +/* + * Keyboard Matrix Assignments + */ +#define MATRIX_ROW_PINS { B2, D0, F5, F4, F1 } +#define MATRIX_COL_PINS { E6, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, D1, B7 } +#define UNUSED_PINS { B0, B1, B3 } + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +#define LED_CAPS_LOCK_PIN F0 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE diff --git a/keyboards/cutie_club/keebcats/dougal/dougal.c b/keyboards/cutie_club/keebcats/dougal/dougal.c new file mode 100644 index 0000000000..8f247bd287 --- /dev/null +++ b/keyboards/cutie_club/keebcats/dougal/dougal.c @@ -0,0 +1,17 @@ +/* Copyright 2021 Cutie Club + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "dougal.h" diff --git a/keyboards/cutie_club/keebcats/dougal/dougal.h b/keyboards/cutie_club/keebcats/dougal/dougal.h new file mode 100644 index 0000000000..cd0fa1d2cd --- /dev/null +++ b/keyboards/cutie_club/keebcats/dougal/dougal.h @@ -0,0 +1,34 @@ +/* Copyright 2021 Cutie Club + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +#define LAYOUT_all( \ + k00_00, k00_01, k00_02, k00_03, k00_04, k00_05, k00_06, k00_07, k00_08, k00_09, k00_10, k00_11, k00_12, k00_13, k00_14, k00_15, \ + k01_00, k01_01, k01_02, k01_03, k01_04, k01_05, k01_06, k01_07, k01_08, k01_09, k01_10, k01_11, k01_12, k01_13, k01_15, \ + k02_00, k02_01, k02_02, k02_03, k02_04, k02_05, k02_06, k02_07, k02_08, k02_09, k02_10, k02_11, k02_12, k02_13, k02_15, \ + k03_00, k03_01, k03_02, k03_03, k03_04, k03_05, k03_06, k03_07, k03_08, k03_09, k03_10, k03_11, k03_12, k03_13, k03_15, \ + k04_00, k04_01, k04_02, k04_04, k04_06, k04_08, k04_09, k04_10, k04_11, k04_12, k04_13, k04_15 \ +) \ +{ \ + { k00_00, k00_01, k00_02, k00_03, k00_04, k00_05, k00_06, k00_07, k00_08, k00_09, k00_10, k00_11, k00_12, k00_13, k00_14, k00_15 }, \ + { k01_00, k01_01, k01_02, k01_03, k01_04, k01_05, k01_06, k01_07, k01_08, k01_09, k01_10, k01_11, k01_12, k01_13, KC_NO, k01_15 }, \ + { k02_00, k02_01, k02_02, k02_03, k02_04, k02_05, k02_06, k02_07, k02_08, k02_09, k02_10, k02_11, k02_12, k02_13, KC_NO, k02_15 }, \ + { k03_00, k03_01, k03_02, k03_03, k03_04, k03_05, k03_06, k03_07, k03_08, k03_09, k03_10, k03_11, k03_12, k03_13, KC_NO, k03_15 }, \ + { k04_00, k04_01, k04_02, KC_NO, k04_04, KC_NO, k04_06, KC_NO, k04_08, k04_09, k04_10, k04_11, k04_12, k04_13, KC_NO, k04_15 } \ +} diff --git a/keyboards/cutie_club/keebcats/dougal/info.json b/keyboards/cutie_club/keebcats/dougal/info.json new file mode 100644 index 0000000000..70c804e20d --- /dev/null +++ b/keyboards/cutie_club/keebcats/dougal/info.json @@ -0,0 +1,84 @@ +{ + "keyboard_name": "Keebcats Dougal", + "url": "", + "maintainer": "Cutie Club", + "layouts": { + "LAYOUT_all": { + "layout": [ + { "x": 0, "y": 0 }, + { "x": 1, "y": 0 }, + { "x": 2, "y": 0 }, + { "x": 3, "y": 0 }, + { "x": 4, "y": 0 }, + { "x": 5, "y": 0 }, + { "x": 6, "y": 0 }, + { "x": 7, "y": 0 }, + { "x": 8, "y": 0 }, + { "x": 9, "y": 0 }, + { "x": 10, "y": 0 }, + { "x": 11, "y": 0 }, + { "x": 12, "y": 0 }, + { "x": 13, "y": 0 }, + { "x": 14, "y": 0 }, + { "x": 15, "y": 0 }, + { "x": 0, "y": 1, "w": 1.5 }, + { "x": 1.5, "y": 1 }, + { "x": 2.5, "y": 1 }, + { "x": 3.5, "y": 1 }, + { "x": 4.5, "y": 1 }, + { "x": 5.5, "y": 1 }, + { "x": 6.5, "y": 1 }, + { "x": 7.5, "y": 1 }, + { "x": 8.5, "y": 1 }, + { "x": 9.5, "y": 1 }, + { "x": 10.5, "y": 1 }, + { "x": 11.5, "y": 1 }, + { "x": 12.5, "y": 1 }, + { "x": 13.5, "y": 1, "w": 1.5 }, + { "x": 15, "y": 1 }, + { "x": 0, "y": 2, "w": 1.75 }, + { "x": 1.75, "y": 2 }, + { "x": 2.75, "y": 2 }, + { "x": 3.75, "y": 2 }, + { "x": 4.75, "y": 2 }, + { "x": 5.75, "y": 2 }, + { "x": 6.75, "y": 2 }, + { "x": 7.75, "y": 2 }, + { "x": 8.75, "y": 2 }, + { "x": 9.75, "y": 2 }, + { "x": 10.75, "y": 2 }, + { "x": 11.75, "y": 2 }, + { "x": 12.75, "y": 2 }, + { "x": 14, "y": 2 }, + { "x": 15, "y": 2 }, + { "x": 0, "y": 3, "w": 1.25 }, + { "x": 1.25, "y": 3 }, + { "x": 2.25, "y": 3 }, + { "x": 3.25, "y": 3 }, + { "x": 4.25, "y": 3 }, + { "x": 5.25, "y": 3 }, + { "x": 6.25, "y": 3 }, + { "x": 7.25, "y": 3 }, + { "x": 8.25, "y": 3 }, + { "x": 9.25, "y": 3 }, + { "x": 10.25, "y": 3 }, + { "x": 11.25, "y": 3 }, + { "x": 12.25, "y": 3, "w": 1.75 }, + { "x": 14, "y": 3 }, + { "x": 15, "y": 3 }, + { "x": 0, "y": 4, "w": 1.25 }, + { "x": 1.25, "y": 4, "w": 1.25 }, + { "x": 2.5, "y": 4, "w": 1.25 }, + { "x": 3.75, "y": 4, "w": 2.25 }, + { "x": 6, "y": 4, "w": 1.25 }, + { "x": 7.25, "y": 4, "w": 2.75 }, + { "x": 10, "y": 4 }, + { "x": 11, "y": 4 }, + { "x": 12, "y": 4 }, + { "x": 13, "y": 4 }, + { "x": 14, "y": 4 }, + { "x": 15, "y": 4 } + ] + } + } +} diff --git a/keyboards/cutie_club/keebcats/dougal/keymaps/default/keymap.c b/keyboards/cutie_club/keebcats/dougal/keymaps/default/keymap.c new file mode 100644 index 0000000000..ec3e1c21f7 --- /dev/null +++ b/keyboards/cutie_club/keebcats/dougal/keymaps/default/keymap.c @@ -0,0 +1,28 @@ +/* Copyright 2021 Cutie Club + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_HOME, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_PGUP, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RGUI, KC_RCTRL, KC_LEFT, KC_DOWN, KC_RIGHT + ) +}; diff --git a/keyboards/cutie_club/keebcats/dougal/keymaps/via/keymap.c b/keyboards/cutie_club/keebcats/dougal/keymaps/via/keymap.c new file mode 100644 index 0000000000..58d184a064 --- /dev/null +++ b/keyboards/cutie_club/keebcats/dougal/keymaps/via/keymap.c @@ -0,0 +1,49 @@ +/* Copyright 2021 Cutie Club + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_HOME, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_PGUP, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RGUI, KC_RCTRL, KC_LEFT, KC_DOWN, KC_RIGHT + ), + [1] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/cutie_club/keebcats/dougal/keymaps/via/rules.mk b/keyboards/cutie_club/keebcats/dougal/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/cutie_club/keebcats/dougal/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/cutie_club/keebcats/dougal/readme.md b/keyboards/cutie_club/keebcats/dougal/readme.md new file mode 100644 index 0000000000..3c0dd932aa --- /dev/null +++ b/keyboards/cutie_club/keebcats/dougal/readme.md @@ -0,0 +1,18 @@ +# Dougal + +* Keyboard Maintainer: [Cutie Club](https://github.com/cutie-club/) +* Hardware Supported: Atmega32u4 based 65% PCB, with wide compatibility +* Hardware Availability: [Keebcats](https://keebcats.co.uk) + +## Bootloader + +Enter the bootloader in 2 ways with the default configuration: + +* **Bootmagic reset**: Hold down the key at top left key (matrix position 0,0) and plug the device in +* **Physical reset button**: Press the button marked reset on the back of the PCB + +Make example for this keyboard (after setting up your build environment): + + make cutie_club/keebcats/dougal:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/cutie_club/keebcats/dougal/rules.mk b/keyboards/cutie_club/keebcats/dougal/rules.mk new file mode 100644 index 0000000000..05c513615e --- /dev/null +++ b/keyboards/cutie_club/keebcats/dougal/rules.mk @@ -0,0 +1,21 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output From 94b535024642bab6705f1e08ec62680d8e49b62b Mon Sep 17 00:00:00 2001 From: Yoshihiro Saito <yshr446@gmail.com> Date: Sat, 20 Nov 2021 02:42:39 +0900 Subject: [PATCH 528/595] [Keymap] Add yoshimaru46's keymap for Ergodash mini (#15191) --- .../mini/keymaps/yoshimaru46/config.h | 33 ++++++ .../mini/keymaps/yoshimaru46/keymap.c | 111 ++++++++++++++++++ .../mini/keymaps/yoshimaru46/readme.md | 4 + .../mini/keymaps/yoshimaru46/rules.mk | 4 + 4 files changed, 152 insertions(+) create mode 100644 keyboards/ergodash/mini/keymaps/yoshimaru46/config.h create mode 100644 keyboards/ergodash/mini/keymaps/yoshimaru46/keymap.c create mode 100644 keyboards/ergodash/mini/keymaps/yoshimaru46/readme.md create mode 100644 keyboards/ergodash/mini/keymaps/yoshimaru46/rules.mk diff --git a/keyboards/ergodash/mini/keymaps/yoshimaru46/config.h b/keyboards/ergodash/mini/keymaps/yoshimaru46/config.h new file mode 100644 index 0000000000..df04873a97 --- /dev/null +++ b/keyboards/ergodash/mini/keymaps/yoshimaru46/config.h @@ -0,0 +1,33 @@ +/* +This is the c configuration file for the keymap + +Copyright 2012 Jun Wako <wakojun@gmail.com> +Copyright 2015 Jack Humbert + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ + +#pragma once + + +/* Use I2C or Serial, not both */ + +#define USE_SERIAL +// #define USE_I2C + +/* Select hand configuration */ + +#define MASTER_LEFT +// #define MASTER_RIGHT +// #define EE_HANDS diff --git a/keyboards/ergodash/mini/keymaps/yoshimaru46/keymap.c b/keyboards/ergodash/mini/keymaps/yoshimaru46/keymap.c new file mode 100644 index 0000000000..98c56c8d16 --- /dev/null +++ b/keyboards/ergodash/mini/keymaps/yoshimaru46/keymap.c @@ -0,0 +1,111 @@ +/* Copyright 2021 Yoshihiro Saito + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/> + */ + +#include QMK_KEYBOARD_H + +enum layers { + _QWERTY, + _LOWER, + _RAISE, + _ADJUST, +}; + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + LOWER, + RAISE, + ADJUST, +}; + +// Shift + ( = < +const key_override_t left_paren_angle_bracket_override = ko_make_basic(MOD_MASK_SHIFT, KC_LEFT_PAREN, KC_LEFT_ANGLE_BRACKET); + +// Shift + ) = > +const key_override_t right_paren_angle_bracket_override = ko_make_basic(MOD_MASK_SHIFT, KC_RIGHT_PAREN, KC_RIGHT_ANGLE_BRACKET); + +const key_override_t **key_overrides = (const key_override_t *[]){ + &left_paren_angle_bracket_override, + &right_paren_angle_bracket_override, + NULL +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Qwerty */ + [_QWERTY] = LAYOUT( + KC_GESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_LPRN, KC_RPRN, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_LBRC, KC_RBRC, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_DEL, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, XXXXXXX, XXXXXXX, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LGUI, LOWER, CTL_T(KC_SPC), KC_SFTENT, RAISE, KC_RGUI, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX + ), + + /* Lower */ + [_LOWER] = LAYOUT( + XXXXXXX, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_F11, KC_GRV, KC_CIRC, KC_AMPR, KC_ASTR, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F12, KC_TILD, KC_BSLS, KC_MINS, KC_EQL, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, XXXXXXX, XXXXXXX, KC_PIPE, KC_UNDS, KC_PLUS, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, _______, _______, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX + ), + + /* Raise */ + [_RAISE] = LAYOUT( + XXXXXXX, KC_P1, KC_P2, KC_P3, KC_P4, KC_P5, XXXXXXX, XXXXXXX, KC_P6, KC_P7, KC_P8, KC_P9, KC_P0, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MPRV, KC_VOLD, KC_VOLU, KC_MNXT, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, XXXXXXX, _______, _______, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX + ), + + /* Adjust */ + [_ADJUST] = LAYOUT( + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX ,XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX ,XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX ,XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______ ,_______, _______, _______, XXXXXXX, _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX + ), +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case ADJUST: + if (record->event.pressed) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + return false; + break; + } + return true; +} diff --git a/keyboards/ergodash/mini/keymaps/yoshimaru46/readme.md b/keyboards/ergodash/mini/keymaps/yoshimaru46/readme.md new file mode 100644 index 0000000000..67a6ed9b90 --- /dev/null +++ b/keyboards/ergodash/mini/keymaps/yoshimaru46/readme.md @@ -0,0 +1,4 @@ +# yoshimaru46's keymap for Ergodash mini + +This is the yoshimaru46's keymap configuration for Ergodash mini. +There are three layers, QWERTY(default), LOWER, and RAISE. diff --git a/keyboards/ergodash/mini/keymaps/yoshimaru46/rules.mk b/keyboards/ergodash/mini/keymaps/yoshimaru46/rules.mk new file mode 100644 index 0000000000..f85c6a4151 --- /dev/null +++ b/keyboards/ergodash/mini/keymaps/yoshimaru46/rules.mk @@ -0,0 +1,4 @@ +BACKLIGHT_ENABLE = no +RGBLIGHT_ENABLE = no +AUDIO_ENABLE = no +KEY_OVERRIDE_ENABLE = yes From 66792b0769988e845a037c5f08d05acb057d2d64 Mon Sep 17 00:00:00 2001 From: Nick Abe <57225836+2Moons-JP@users.noreply.github.com> Date: Sat, 20 Nov 2021 02:50:10 +0900 Subject: [PATCH 529/595] [Keyboard] Aozora update (#15201) Co-authored-by: Ryan <fauxpark@gmail.com> --- .../aozora/{hotswap/hotswap.c => aozora.c} | 2 +- .../aozora/{hotswap/hotswap.h => aozora.h} | 13 +++++++ keyboards/aozora/{hotswap => }/config.h | 11 +++--- keyboards/aozora/{hotswap => }/info.json | 3 ++ .../{hotswap => }/keymaps/default/keymap.c | 4 +-- keyboards/aozora/keymaps/default_all/keymap.c | 36 +++++++++++++++++++ keyboards/aozora/keymaps/via/keymap.c | 36 +++++++++++++++++++ keyboards/aozora/keymaps/via/rules.mk | 3 ++ keyboards/aozora/{hotswap => }/readme.md | 2 +- keyboards/aozora/{hotswap => }/rules.mk | 0 10 files changed, 102 insertions(+), 8 deletions(-) rename keyboards/aozora/{hotswap/hotswap.c => aozora.c} (97%) rename keyboards/aozora/{hotswap/hotswap.h => aozora.h} (61%) rename keyboards/aozora/{hotswap => }/config.h (89%) rename keyboards/aozora/{hotswap => }/info.json (61%) rename keyboards/aozora/{hotswap => }/keymaps/default/keymap.c (94%) create mode 100644 keyboards/aozora/keymaps/default_all/keymap.c create mode 100644 keyboards/aozora/keymaps/via/keymap.c create mode 100644 keyboards/aozora/keymaps/via/rules.mk rename keyboards/aozora/{hotswap => }/readme.md (96%) rename keyboards/aozora/{hotswap => }/rules.mk (100%) diff --git a/keyboards/aozora/hotswap/hotswap.c b/keyboards/aozora/aozora.c similarity index 97% rename from keyboards/aozora/hotswap/hotswap.c rename to keyboards/aozora/aozora.c index f8197c3c00..4466858348 100644 --- a/keyboards/aozora/hotswap/hotswap.c +++ b/keyboards/aozora/aozora.c @@ -14,4 +14,4 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include "hotswap.h" \ No newline at end of file +#include "aozora.h" diff --git a/keyboards/aozora/hotswap/hotswap.h b/keyboards/aozora/aozora.h similarity index 61% rename from keyboards/aozora/hotswap/hotswap.h rename to keyboards/aozora/aozora.h index 5282aaf81c..30a4258ac8 100644 --- a/keyboards/aozora/hotswap/hotswap.h +++ b/keyboards/aozora/aozora.h @@ -32,3 +32,16 @@ { K40, K41, K42, KC_NO, K44, KC_NO, KC_NO, KC_NO, K48, K49, K4A, KC_NO, KC_NO, K4D, K4E, K4F }, \ } +#define LAYOUT_all( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0G, K0D, K0E, K0F, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \ + K30, K3G, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3C, K3D, K3E, K3F, \ + K40, K41, K42, K44, K48, K49, K4A, K4D, K4E, K4F \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K0F, K0G }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, K1F, KC_NO }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, KC_NO, KC_NO, KC_NO }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, KC_NO, K3C, K3D, K3E, K3F, K3G }, \ + { K40, K41, K42, KC_NO, K44, KC_NO, KC_NO, KC_NO, K48, K49, K4A, KC_NO, KC_NO, K4D, K4E, K4F, KC_NO }, \ +} diff --git a/keyboards/aozora/hotswap/config.h b/keyboards/aozora/config.h similarity index 89% rename from keyboards/aozora/hotswap/config.h rename to keyboards/aozora/config.h index 60277f2635..67972a84b2 100644 --- a/keyboards/aozora/hotswap/config.h +++ b/keyboards/aozora/config.h @@ -19,15 +19,15 @@ #include "config_common.h" /* USB Device descriptor parameter */ -#define VENDOR_ID 0xCA75 -#define PRODUCT_ID 0x4014 +#define VENDOR_ID 0x04D8 +#define PRODUCT_ID 0xE86A #define DEVICE_VER 0x0001 #define MANUFACTURER Salmon Cat Studio #define PRODUCT Aozora /* key matrix size */ #define MATRIX_ROWS 5 -#define MATRIX_COLS 16 +#define MATRIX_COLS 17 /* * Keyboard Matrix Assignments @@ -40,6 +40,9 @@ * */ #define MATRIX_ROW_PINS { F6, F5, F4, F1, F0 } -#define MATRIX_COL_PINS { B0, B1, B2, B3, B7, D0, D1, D4, D6, D7, B4, B5, B6, C6, C7, F7 } +#define MATRIX_COL_PINS { B0, B1, B2, B3, B7, D0, D1, D4, D6, D7, B4, B5, B6, C6, C7, F7, D2} #define DIODE_DIRECTION COL2ROW + +/* EEPROM for via */ +#define DYNAMIC_KEYMAP_LAYER_COUNT 2 diff --git a/keyboards/aozora/hotswap/info.json b/keyboards/aozora/info.json similarity index 61% rename from keyboards/aozora/hotswap/info.json rename to keyboards/aozora/info.json index dbceb3b371..0f442cc12e 100644 --- a/keyboards/aozora/hotswap/info.json +++ b/keyboards/aozora/info.json @@ -75,6 +75,9 @@ {"label":"K4E (F0,C7)", "x":15.25, "y":4}, {"label":"K4F (F0,F7)", "x":16.25, "y":4} ] + }, + "LAYOUT_all": { + "layout": [{"label":"~", "x":0, "y":1.25}, {"label":"!", "x":1, "y":1.25}, {"label":"@", "x":2, "y":1.25}, {"label":"#", "x":3, "y":1.25}, {"label":"$", "x":4, "y":1.25}, {"label":"%", "x":5, "y":1.25}, {"label":"^", "x":6, "y":1.25}, {"label":"&", "x":7, "y":1.25}, {"label":"*", "x":8, "y":1.25}, {"label":"(", "x":9, "y":1.25}, {"label":")", "x":10, "y":1.25}, {"label":"_", "x":11, "y":1.25}, {"label":"+", "x":12, "y":1.25}, {"label":"|", "x":13, "y":1.25}, {"label":"Backspace", "x":14, "y":1.25}, {"label":"Insert", "x":15.25, "y":1.25}, {"label":"Home", "x":16.25, "y":1.25}, {"label":"Tab", "x":0, "y":2.25, "w":1.5}, {"label":"Q", "x":1.5, "y":2.25}, {"label":"W", "x":2.5, "y":2.25}, {"label":"E", "x":3.5, "y":2.25}, {"label":"R", "x":4.5, "y":2.25}, {"label":"T", "x":5.5, "y":2.25}, {"label":"Y", "x":6.5, "y":2.25}, {"label":"U", "x":7.5, "y":2.25}, {"label":"I", "x":8.5, "y":2.25}, {"label":"O", "x":9.5, "y":2.25}, {"label":"P", "x":10.5, "y":2.25}, {"label":"{", "x":11.5, "y":2.25}, {"label":"}", "x":12.5, "y":2.25}, {"label":"|", "x":13.5, "y":2.25, "w":1.5}, {"label":"Del", "x":15.25, "y":2.25}, {"label":"End", "x":16.25, "y":2.25}, {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, {"label":"A", "x":1.75, "y":3.25}, {"label":"S", "x":2.75, "y":3.25}, {"label":"D", "x":3.75, "y":3.25}, {"label":"F", "x":4.75, "y":3.25}, {"label":"G", "x":5.75, "y":3.25}, {"label":"H", "x":6.75, "y":3.25}, {"label":"J", "x":7.75, "y":3.25}, {"label":"K", "x":8.75, "y":3.25}, {"label":"L", "x":9.75, "y":3.25}, {"label":":", "x":10.75, "y":3.25}, {"label":"\"", "x":11.75, "y":3.25}, {"label":"~", "x":12.75, "y":3.25}, {"label":"Enter", "x":13.75, "y":3.25, "w":1.25}, {"label":"Shift", "x":0, "y":4.25, "w":1.25}, {"label":"|", "x":1.25, "y":4.25}, {"label":"Z", "x":2.25, "y":4.25}, {"label":"X", "x":3.25, "y":4.25}, {"label":"C", "x":4.25, "y":4.25}, {"label":"V", "x":5.25, "y":4.25}, {"label":"B", "x":6.25, "y":4.25}, {"label":"N", "x":7.25, "y":4.25}, {"label":"M", "x":8.25, "y":4.25}, {"label":"<", "x":9.25, "y":4.25}, {"label":">", "x":10.25, "y":4.25}, {"label":"?", "x":11.25, "y":4.25}, {"label":"\\", "x":12.25, "y":4.25}, {"label":"Shift", "x":13.25, "y":4.25, "w":1.75}, {"label":"\u2191", "x":15.25, "y":4.25}, {"label":"Fn", "x":16.25, "y":4.25}, {"label":"Ctrl", "x":0, "y":5.25, "w":1.25}, {"label":"Win", "x":1.25, "y":5.25, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.25, "w":1.25}, {"x":3.75, "y":5.25, "w":6.25}, {"label":"Alt", "x":10, "y":5.25, "w":1.25}, {"label":"Win", "x":11.25, "y":5.25, "w":1.25}, {"label":"Menu", "x":12.5, "y":5.25, "w":1.25}, {"label":"\u2190", "x":14.25, "y":5.25}, {"label":"\u2193", "x":15.25, "y":5.25}, {"label":"\u2192", "x":16.25, "y":5.25}] } } } diff --git a/keyboards/aozora/hotswap/keymaps/default/keymap.c b/keyboards/aozora/keymaps/default/keymap.c similarity index 94% rename from keyboards/aozora/hotswap/keymaps/default/keymap.c rename to keyboards/aozora/keymaps/default/keymap.c index f941f5dff6..8229aaa29a 100644 --- a/keyboards/aozora/hotswap/keymaps/default/keymap.c +++ b/keyboards/aozora/keymaps/default/keymap.c @@ -21,8 +21,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_PSCR, KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_PGDN, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_LSFT, KC_UP, MO(1), - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_LALT, KC_LGUI, KC_LCTL, KC_LEFT, KC_DOWN, KC_RGHT + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, MO(1), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ), [1] = LAYOUT( KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, diff --git a/keyboards/aozora/keymaps/default_all/keymap.c b/keyboards/aozora/keymaps/default_all/keymap.c new file mode 100644 index 0000000000..3376f2e8cd --- /dev/null +++ b/keyboards/aozora/keymaps/default_all/keymap.c @@ -0,0 +1,36 @@ +/* Copyright 2021 Salmon Cat Studio + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H +#include "sendstring_jis.h" // macro sendstring for jis keyboard マクロ文字列送信時に日本語キーボード設定での文字化け回避 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_INT3, KC_BSPC, KC_PSCR, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, + KC_LSFT, KC_PIPE, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_INT1, KC_RSFT, KC_UP, MO(1), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_all( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F16, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + +}; diff --git a/keyboards/aozora/keymaps/via/keymap.c b/keyboards/aozora/keymaps/via/keymap.c new file mode 100644 index 0000000000..3376f2e8cd --- /dev/null +++ b/keyboards/aozora/keymaps/via/keymap.c @@ -0,0 +1,36 @@ +/* Copyright 2021 Salmon Cat Studio + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H +#include "sendstring_jis.h" // macro sendstring for jis keyboard マクロ文字列送信時に日本語キーボード設定での文字化け回避 + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_INT3, KC_BSPC, KC_PSCR, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, + KC_LSFT, KC_PIPE, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_INT1, KC_RSFT, KC_UP, MO(1), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_all( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F16, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + +}; diff --git a/keyboards/aozora/keymaps/via/rules.mk b/keyboards/aozora/keymaps/via/rules.mk new file mode 100644 index 0000000000..32f462d06c --- /dev/null +++ b/keyboards/aozora/keymaps/via/rules.mk @@ -0,0 +1,3 @@ +VIA_ENABLE = yes +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no \ No newline at end of file diff --git a/keyboards/aozora/hotswap/readme.md b/keyboards/aozora/readme.md similarity index 96% rename from keyboards/aozora/hotswap/readme.md rename to keyboards/aozora/readme.md index 157b58c0b8..8d95940f87 100644 --- a/keyboards/aozora/hotswap/readme.md +++ b/keyboards/aozora/readme.md @@ -10,7 +10,7 @@ A 65%-style 69-key keyboard featuring a cloud-shaped badge. Make example for this keyboard (after setting up your build environment): - make aozora/hotswap:default + make aozora:default To reset, press the button on the back of the PCB. diff --git a/keyboards/aozora/hotswap/rules.mk b/keyboards/aozora/rules.mk similarity index 100% rename from keyboards/aozora/hotswap/rules.mk rename to keyboards/aozora/rules.mk From 817a82378b58ec34b24a71e80f1ac0389aed9d39 Mon Sep 17 00:00:00 2001 From: Ramon Imbao <ramonimbao@gmail.com> Date: Sat, 20 Nov 2021 01:51:00 +0800 Subject: [PATCH 530/595] [Keyboard] Add TKL-FF v2 (#15144) Co-authored-by: Drashna Jaelre <drashna@live.com> --- .../tkl_ff/keymaps/default/keymap.c | 39 ++++++++++++++ .../ramonimbao/tkl_ff/keymaps/iso/keymap.c | 39 ++++++++++++++ .../ramonimbao/tkl_ff/keymaps/via/keymap.c | 39 ++++++++++++++ keyboards/ramonimbao/tkl_ff/readme.md | 2 +- keyboards/ramonimbao/tkl_ff/v2/config.h | 52 +++++++++++++++++++ keyboards/ramonimbao/tkl_ff/v2/rules.mk | 1 + keyboards/ramonimbao/tkl_ff/v2/v2.c | 17 ++++++ keyboards/ramonimbao/tkl_ff/v2/v2.h | 18 +++++++ 8 files changed, 206 insertions(+), 1 deletion(-) create mode 100644 keyboards/ramonimbao/tkl_ff/v2/config.h create mode 100644 keyboards/ramonimbao/tkl_ff/v2/rules.mk create mode 100644 keyboards/ramonimbao/tkl_ff/v2/v2.c create mode 100644 keyboards/ramonimbao/tkl_ff/v2/v2.h diff --git a/keyboards/ramonimbao/tkl_ff/keymaps/default/keymap.c b/keyboards/ramonimbao/tkl_ff/keymaps/default/keymap.c index 1d8b938fd9..e44b56e55f 100644 --- a/keyboards/ramonimbao/tkl_ff/keymaps/default/keymap.c +++ b/keyboards/ramonimbao/tkl_ff/keymaps/default/keymap.c @@ -25,3 +25,42 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ) }; + +#ifdef RGBLIGHT_ENABLE +const rgblight_segment_t PROGMEM ll_none[] = RGBLIGHT_LAYER_SEGMENTS( + {0, 1, HSV_OFF}, + {1, 1, HSV_OFF} +); + +const rgblight_segment_t PROGMEM ll_cl[] = RGBLIGHT_LAYER_SEGMENTS( + {1, 1, HSV_OFF} +); + +const rgblight_segment_t PROGMEM ll_sl[] = RGBLIGHT_LAYER_SEGMENTS( + {0, 1, HSV_OFF} +); + +const rgblight_segment_t* const PROGMEM rgb_layers[] = RGBLIGHT_LAYERS_LIST(ll_none, ll_cl, ll_sl); + +void keyboard_post_init_kb(void) { + rgblight_layers = rgb_layers; + + keyboard_post_init_user(); +} + +bool led_update_kb(led_t led_state) { + bool res = led_update_user(led_state); + + if (res) { + uint8_t lock_bits = led_state.scroll_lock << 1 | led_state.caps_lock; + for (uint8_t i=0; i<3; i++) { + rgblight_set_layer_state(i, false); + } + if (lock_bits < 3) { + rgblight_set_layer_state(lock_bits, true); + } + } + + return res; +} +#endif diff --git a/keyboards/ramonimbao/tkl_ff/keymaps/iso/keymap.c b/keyboards/ramonimbao/tkl_ff/keymaps/iso/keymap.c index 2729e390da..17997828df 100644 --- a/keyboards/ramonimbao/tkl_ff/keymaps/iso/keymap.c +++ b/keyboards/ramonimbao/tkl_ff/keymaps/iso/keymap.c @@ -25,3 +25,42 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT ) }; + +#ifdef RGBLIGHT_ENABLE +const rgblight_segment_t PROGMEM ll_none[] = RGBLIGHT_LAYER_SEGMENTS( + {0, 1, HSV_OFF}, + {1, 1, HSV_OFF} +); + +const rgblight_segment_t PROGMEM ll_cl[] = RGBLIGHT_LAYER_SEGMENTS( + {1, 1, HSV_OFF} +); + +const rgblight_segment_t PROGMEM ll_sl[] = RGBLIGHT_LAYER_SEGMENTS( + {0, 1, HSV_OFF} +); + +const rgblight_segment_t* const PROGMEM rgb_layers[] = RGBLIGHT_LAYERS_LIST(ll_none, ll_cl, ll_sl); + +void keyboard_post_init_kb(void) { + rgblight_layers = rgb_layers; + + keyboard_post_init_user(); +} + +bool led_update_kb(led_t led_state) { + bool res = led_update_user(led_state); + + if (res) { + uint8_t lock_bits = led_state.scroll_lock << 1 | led_state.caps_lock; + for (uint8_t i=0; i<3; i++) { + rgblight_set_layer_state(i, false); + } + if (lock_bits < 3) { + rgblight_set_layer_state(lock_bits, true); + } + } + + return res; +} +#endif diff --git a/keyboards/ramonimbao/tkl_ff/keymaps/via/keymap.c b/keyboards/ramonimbao/tkl_ff/keymaps/via/keymap.c index d46f3aade6..298b7a1fa2 100644 --- a/keyboards/ramonimbao/tkl_ff/keymaps/via/keymap.c +++ b/keyboards/ramonimbao/tkl_ff/keymaps/via/keymap.c @@ -49,3 +49,42 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ) }; + +#ifdef RGBLIGHT_ENABLE +const rgblight_segment_t PROGMEM ll_none[] = RGBLIGHT_LAYER_SEGMENTS( + {0, 1, HSV_OFF}, + {1, 1, HSV_OFF} +); + +const rgblight_segment_t PROGMEM ll_cl[] = RGBLIGHT_LAYER_SEGMENTS( + {1, 1, HSV_OFF} +); + +const rgblight_segment_t PROGMEM ll_sl[] = RGBLIGHT_LAYER_SEGMENTS( + {0, 1, HSV_OFF} +); + +const rgblight_segment_t* const PROGMEM rgb_layers[] = RGBLIGHT_LAYERS_LIST(ll_none, ll_cl, ll_sl); + +void keyboard_post_init_kb(void) { + rgblight_layers = rgb_layers; + + keyboard_post_init_user(); +} + +bool led_update_kb(led_t led_state) { + bool res = led_update_user(led_state); + + if (res) { + uint8_t lock_bits = led_state.scroll_lock << 1 | led_state.caps_lock; + for (uint8_t i=0; i<3; i++) { + rgblight_set_layer_state(i, false); + } + if (lock_bits < 3) { + rgblight_set_layer_state(lock_bits, true); + } + } + + return res; +} +#endif diff --git a/keyboards/ramonimbao/tkl_ff/readme.md b/keyboards/ramonimbao/tkl_ff/readme.md index 06a64210ba..ffc11f585e 100644 --- a/keyboards/ramonimbao/tkl_ff/readme.md +++ b/keyboards/ramonimbao/tkl_ff/readme.md @@ -2,7 +2,7 @@ ![TKL-FF](https://i.imgur.com/GJCo3F5l.png) -A TKL PCB made for the Geonworks Frog keyboard that supports both F12 and F13. +A TKL PCB made for the Geonworks Frog keyboard that supports both F12 and F13. V2 simply adds RGB indicator LEDs. * Keyboard Maintainer: [Ramon Imbao](https://github.com/ramonimbao) * Hardware Supported: ATmega32u4 diff --git a/keyboards/ramonimbao/tkl_ff/v2/config.h b/keyboards/ramonimbao/tkl_ff/v2/config.h new file mode 100644 index 0000000000..a35d1bc599 --- /dev/null +++ b/keyboards/ramonimbao/tkl_ff/v2/config.h @@ -0,0 +1,52 @@ +/* Copyright 2021 Ramon Imbao + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "config_common.h" + +#undef PRODUCT_ID +#define PRODUCT_ID 0x10FF + +#define RGBLIGHT_LAYERS +#define RGBLIGHT_LAYERS_OVERRIDE_RGB_OFF + +#define RGB_DI_PIN E2 +#ifdef RGB_DI_PIN +# define RGBLED_NUM 26 +# define RGBLIGHT_HUE_STEP 32 +# define RGBLIGHT_SAT_STEP 32 +# define RGBLIGHT_VAL_STEP 32 +//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ +// # define RGBLIGHT_ANIMATIONS +/*== or choose animations ==*/ +# define RGBLIGHT_EFFECT_BREATHING +# define RGBLIGHT_EFFECT_RAINBOW_MOOD +# define RGBLIGHT_EFFECT_RAINBOW_SWIRL +//# define RGBLIGHT_EFFECT_SNAKE +//# define RGBLIGHT_EFFECT_KNIGHT +# define RGBLIGHT_EFFECT_CHRISTMAS +# define RGBLIGHT_EFFECT_STATIC_GRADIENT +# define RGBLIGHT_EFFECT_RGB_TEST +# define RGBLIGHT_EFFECT_ALTERNATING +/*== customize breathing effect ==*/ +/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +/*==== use exp() and sin() ====*/ +//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +#endif diff --git a/keyboards/ramonimbao/tkl_ff/v2/rules.mk b/keyboards/ramonimbao/tkl_ff/v2/rules.mk new file mode 100644 index 0000000000..84ef473c02 --- /dev/null +++ b/keyboards/ramonimbao/tkl_ff/v2/rules.mk @@ -0,0 +1 @@ +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow diff --git a/keyboards/ramonimbao/tkl_ff/v2/v2.c b/keyboards/ramonimbao/tkl_ff/v2/v2.c new file mode 100644 index 0000000000..de5f32e3ca --- /dev/null +++ b/keyboards/ramonimbao/tkl_ff/v2/v2.c @@ -0,0 +1,17 @@ +/* Copyright 2021 Ramon Imbao + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "v2.h" diff --git a/keyboards/ramonimbao/tkl_ff/v2/v2.h b/keyboards/ramonimbao/tkl_ff/v2/v2.h new file mode 100644 index 0000000000..7c4566defb --- /dev/null +++ b/keyboards/ramonimbao/tkl_ff/v2/v2.h @@ -0,0 +1,18 @@ +/* Copyright 2021 Ramon Imbao + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" From 5c3afe3e6bc40ecda2770a61d8110bfa9b0dd39b Mon Sep 17 00:00:00 2001 From: jels <66403163+Jels-kb@users.noreply.github.com> Date: Sat, 20 Nov 2021 03:51:21 +1000 Subject: [PATCH 531/595] [Keyboard] Add b87 keyboard (#15091) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> --- keyboards/winkeyless/b87/b87.c | 19 ++++ keyboards/winkeyless/b87/b87.h | 40 +++++++ keyboards/winkeyless/b87/config.h | 56 ++++++++++ keyboards/winkeyless/b87/info.json | 102 ++++++++++++++++++ .../winkeyless/b87/keymaps/default/keymap.c | 55 ++++++++++ keyboards/winkeyless/b87/keymaps/via/config.h | 19 ++++ keyboards/winkeyless/b87/keymaps/via/keymap.c | 46 ++++++++ keyboards/winkeyless/b87/keymaps/via/rules.mk | 2 + keyboards/winkeyless/b87/readme.md | 23 ++++ keyboards/winkeyless/b87/rules.mk | 20 ++++ 10 files changed, 382 insertions(+) create mode 100644 keyboards/winkeyless/b87/b87.c create mode 100644 keyboards/winkeyless/b87/b87.h create mode 100644 keyboards/winkeyless/b87/config.h create mode 100644 keyboards/winkeyless/b87/info.json create mode 100644 keyboards/winkeyless/b87/keymaps/default/keymap.c create mode 100644 keyboards/winkeyless/b87/keymaps/via/config.h create mode 100644 keyboards/winkeyless/b87/keymaps/via/keymap.c create mode 100644 keyboards/winkeyless/b87/keymaps/via/rules.mk create mode 100644 keyboards/winkeyless/b87/readme.md create mode 100644 keyboards/winkeyless/b87/rules.mk diff --git a/keyboards/winkeyless/b87/b87.c b/keyboards/winkeyless/b87/b87.c new file mode 100644 index 0000000000..46c5ad2bf0 --- /dev/null +++ b/keyboards/winkeyless/b87/b87.c @@ -0,0 +1,19 @@ +/* Copyright 2021 Joah Nelson (Jels) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +// not much here + +#include "b87.h" diff --git a/keyboards/winkeyless/b87/b87.h b/keyboards/winkeyless/b87/b87.h new file mode 100644 index 0000000000..27ece38575 --- /dev/null +++ b/keyboards/winkeyless/b87/b87.h @@ -0,0 +1,40 @@ +/* Copyright 2021 Joah Nelson (Jels) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +#define ___ KC_NO + + +#define LAYOUT_all( \ + K00, K02, K03, K04, K05, K60, K66, K76, K70, K07, K08, K09, K0A, K49, K4A, K3A, \ + K10, K11, K12, K13, K14, K15, K61, K67, K77, K71, K16, K17, K18, K19, K1A, K59, K5A, K7B, \ + K20, K21, K22, K23, K24, K25, K62, K68, K78, K72, K26, K27, K28, K29, K7E, K7D, K7C, \ + K30, K31, K32, K33, K34, K35, K63, K69, K79, K73, K36, K37, K38, K39, \ + K40, K53, K41, K42, K43, K44, K45, K64, K6A, K7A, K74, K46, K47, K48, K6C, \ + K50, K51, K52, K65, K75, K56, K57, K58, K6E, K6D, K6B \ +){ \ + {K00, ___, K02, K03, K04, K05, ___, K07, K08, K09, K0A, ___, ___, ___, ___}, \ + {K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, ___, ___, ___, ___}, \ + {K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, ___, ___, ___, ___, ___}, \ + {K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, ___, ___, ___, ___}, \ + {K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4A, ___, ___, ___, ___}, \ + {K50, K51, K52, K53, ___, ___, K56, K57, K58, K59, K5A, ___, ___, ___, ___}, \ + {K60, K61, K62, K63, K64, K65, K66, K67, K68, K69, K6A, K6B, K6C, K6D, K6E}, \ + {K70, K71, K72, K73, K74, K75, K76, K77, K78, K79, K7A, K7B, K7C, K7D, K7E} \ +} diff --git a/keyboards/winkeyless/b87/config.h b/keyboards/winkeyless/b87/config.h new file mode 100644 index 0000000000..0598ee700b --- /dev/null +++ b/keyboards/winkeyless/b87/config.h @@ -0,0 +1,56 @@ +/* Copyright 2021 Joah Nelson (Jels) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor paramater */ +#define VENDOR_ID 0x20A0 // +#define PRODUCT_ID 0x0B87 // B87 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Winkeyless +#define PRODUCT B87 // QMK PORT + +/* Define Matrix size */ +#define MATRIX_ROWS 8 +#define MATRIX_COLS 15 + +/*Define Matrix Pins */ +#define MATRIX_ROW_PINS {B5, B4, B3, B2, B1, B0, B6, B7} +#define MATRIX_COL_PINS {A0, A1, A2, A3, A4, A5, C5, C4, C3, C2, D7, C6, C7, A7, A6} + +#define RGBLED_NUM 20 // Number of LEDs +// RGB effects +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +#define BACKLIGHT_PIN D4 +#define BACKLIGHT_LEVELS 3 + +#define LED_CAPS_LOCK_PIN D1 +#define LED_SCROLL_LOCK_PIN D6 diff --git a/keyboards/winkeyless/b87/info.json b/keyboards/winkeyless/b87/info.json new file mode 100644 index 0000000000..93721d7078 --- /dev/null +++ b/keyboards/winkeyless/b87/info.json @@ -0,0 +1,102 @@ +{ + "keyboard_name": "B87", + "url": "", + "maintainer": "qmk", + "layouts": { + "LAYOUT_all": { + "layout": [ + { "label": "Esc", "x": 0, "y": 0 }, + { "label": "F1", "x": 2, "y": 0 }, + { "label": "F2", "x": 3, "y": 0 }, + { "label": "F3", "x": 4, "y": 0 }, + { "label": "F4", "x": 5, "y": 0 }, + { "label": "F5", "x": 6.5, "y": 0 }, + { "label": "F6", "x": 7.5, "y": 0 }, + { "label": "F7", "x": 8.5, "y": 0 }, + { "label": "F8", "x": 9.5, "y": 0 }, + { "label": "F9", "x": 11, "y": 0 }, + { "label": "F10", "x": 12, "y": 0 }, + { "label": "F11", "x": 13, "y": 0 }, + { "label": "F12", "x": 14, "y": 0 }, + { "label": "PrtSc", "x": 15.25, "y": 0 }, + { "label": "Scroll Lock", "x": 16.25, "y": 0 }, + { "label": "Pause", "x": 17.25, "y": 0 }, + { "label": "~", "x": 0, "y": 1.25 }, + { "label": "!", "x": 1, "y": 1.25 }, + { "label": "@", "x": 2, "y": 1.25 }, + { "label": "#", "x": 3, "y": 1.25 }, + { "label": "$", "x": 4, "y": 1.25 }, + { "label": "%", "x": 5, "y": 1.25 }, + { "label": "^", "x": 6, "y": 1.25 }, + { "label": "&", "x": 7, "y": 1.25 }, + { "label": "*", "x": 8, "y": 1.25 }, + { "label": "(", "x": 9, "y": 1.25 }, + { "label": ")", "x": 10, "y": 1.25 }, + { "label": "_", "x": 11, "y": 1.25 }, + { "label": "+", "x": 12, "y": 1.25 }, + { "x": 13, "y": 1.25 }, + { "label": "Bksp", "x": 14, "y": 1.25 }, + { "label": "Insert", "x": 15.25, "y": 1.25 }, + { "label": "Home", "x": 16.25, "y": 1.25 }, + { "label": "PgUp", "x": 17.25, "y": 1.25 }, + { "label": "Tab", "x": 0, "y": 2.25, "w": 1.5 }, + { "label": "Q", "x": 1.5, "y": 2.25 }, + { "label": "W", "x": 2.5, "y": 2.25 }, + { "label": "E", "x": 3.5, "y": 2.25 }, + { "label": "R", "x": 4.5, "y": 2.25 }, + { "label": "T", "x": 5.5, "y": 2.25 }, + { "label": "Y", "x": 6.5, "y": 2.25 }, + { "label": "U", "x": 7.5, "y": 2.25 }, + { "label": "I", "x": 8.5, "y": 2.25 }, + { "label": "O", "x": 9.5, "y": 2.25 }, + { "label": "P", "x": 10.5, "y": 2.25 }, + { "label": "{", "x": 11.5, "y": 2.25 }, + { "label": "}", "x": 12.5, "y": 2.25 }, + { "label": "|", "x": 13.5, "y": 2.25, "w": 1.5 }, + { "label": "Delete", "x": 15.25, "y": 2.25 }, + { "label": "End", "x": 16.25, "y": 2.25 }, + { "label": "PgDn", "x": 17.25, "y": 2.25 }, + { "label": "Caps Lock", "x": 0, "y": 3.25, "w": 1.75 }, + { "label": "A", "x": 1.75, "y": 3.25 }, + { "label": "S", "x": 2.75, "y": 3.25 }, + { "label": "D", "x": 3.75, "y": 3.25 }, + { "label": "F", "x": 4.75, "y": 3.25 }, + { "label": "G", "x": 5.75, "y": 3.25 }, + { "label": "H", "x": 6.75, "y": 3.25 }, + { "label": "J", "x": 7.75, "y": 3.25 }, + { "label": "K", "x": 8.75, "y": 3.25 }, + { "label": "L", "x": 9.75, "y": 3.25 }, + { "label": ":", "x": 10.75, "y": 3.25 }, + { "label": "\"", "x": 11.75, "y": 3.25 }, + { "x": 12.75, "y": 3.25 }, + { "label": "Enter", "x": 13.75, "y": 3.25, "w": 1.25 }, + { "label": "Shift", "x": 0, "y": 4.25, "w": 1.25 }, + { "x": 1.25, "y": 4.25 }, + { "label": "Z", "x": 2.25, "y": 4.25 }, + { "label": "X", "x": 3.25, "y": 4.25 }, + { "label": "C", "x": 4.25, "y": 4.25 }, + { "label": "V", "x": 5.25, "y": 4.25 }, + { "label": "B", "x": 6.25, "y": 4.25 }, + { "label": "N", "x": 7.25, "y": 4.25 }, + { "label": "M", "x": 8.25, "y": 4.25 }, + { "label": "<", "x": 9.25, "y": 4.25 }, + { "label": ">", "x": 10.25, "y": 4.25 }, + { "label": "?", "x": 11.25, "y": 4.25 }, + { "label": "Shift", "x": 12.25, "y": 4.25, "w": 1.75 }, + { "x": 14, "y": 4.25 }, + { "label": "\u2191", "x": 16.25, "y": 4.25 }, + { "label": "Ctrl", "x": 0, "y": 5.25, "w": 1.25 }, + { "label": "Win", "x": 1.25, "y": 5.25, "w": 1.25 }, + { "label": "Alt", "x": 2.5, "y": 5.25, "w": 1.25 }, + { "x": 3.75, "y": 5.25, "w": 6.25 }, + { "label": "Alt", "x": 10, "y": 5.25, "w": 1.25 }, + { "label": "Win", "x": 11.25, "y": 5.25, "w": 1.25 }, + { "label": "Menu", "x": 12.5, "y": 5.25, "w": 1.25 }, + { "label": "Ctrl", "x": 13.75, "y": 5.25, "w": 1.25 }, + { "label": "\u2190", "x": 15.25, "y": 5.25 }, + { "label": "\u2193", "x": 16.25, "y": 5.25 }, + { "label": "\u2192", "x": 17.25, "y": 5.25 } + ] + } + } +} diff --git a/keyboards/winkeyless/b87/keymaps/default/keymap.c b/keyboards/winkeyless/b87/keymaps/default/keymap.c new file mode 100644 index 0000000000..4b48b09fe8 --- /dev/null +++ b/keyboards/winkeyless/b87/keymaps/default/keymap.c @@ -0,0 +1,55 @@ +/* Copyright 2021 Joah Nelson (Jels) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +//base layer +[0] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, + KC_LSFT, KC_BSLS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT +), +[1] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), +[2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS +), +[3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; \ No newline at end of file diff --git a/keyboards/winkeyless/b87/keymaps/via/config.h b/keyboards/winkeyless/b87/keymaps/via/config.h new file mode 100644 index 0000000000..ce14d28749 --- /dev/null +++ b/keyboards/winkeyless/b87/keymaps/via/config.h @@ -0,0 +1,19 @@ +/* Copyright 2021 Joah Nelson (Jels) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#define DYNAMIC_KEYMAP_LAYER_COUNT 3 diff --git a/keyboards/winkeyless/b87/keymaps/via/keymap.c b/keyboards/winkeyless/b87/keymaps/via/keymap.c new file mode 100644 index 0000000000..2dc2890180 --- /dev/null +++ b/keyboards/winkeyless/b87/keymaps/via/keymap.c @@ -0,0 +1,46 @@ +/* Copyright 2021 Joah Nelson (Jels) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +//base layer +[0] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_ENT, + KC_LSFT, KC_BSLS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT +), +[1] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), +[2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS +) +}; \ No newline at end of file diff --git a/keyboards/winkeyless/b87/keymaps/via/rules.mk b/keyboards/winkeyless/b87/keymaps/via/rules.mk new file mode 100644 index 0000000000..36b7ba9cbc --- /dev/null +++ b/keyboards/winkeyless/b87/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/winkeyless/b87/readme.md b/keyboards/winkeyless/b87/readme.md new file mode 100644 index 0000000000..ea617f7c89 --- /dev/null +++ b/keyboards/winkeyless/b87/readme.md @@ -0,0 +1,23 @@ +# B87 + +A TKL keyboard with RGB underglow. + +QMK Firmware is not the official firmware for the B.mini. + +* Keyboard Maintainer: QMK Community +* Hardware Supported: B87 PCB +* Hardware Availability: <https://winkeyless.kr/product/b-87-pcb-x2/> + +Make example for this keyboard (after setting up your build environment): + + make winkeyless/b87:default + +Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) + + make winkeyless/b87:default:flash + +This firmware can also be flashed onto the KBDFans KBD75 Round 1 Bootmapper Client boards sold during the 2017 and early 2018 timeframe. + +**Reset Key**: Hold down the top left most key located at `K00`, commonly programmed as Escape while plugging in the keyboard. + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/winkeyless/b87/rules.mk b/keyboards/winkeyless/b87/rules.mk new file mode 100644 index 0000000000..9566174813 --- /dev/null +++ b/keyboards/winkeyless/b87/rules.mk @@ -0,0 +1,20 @@ +# MCU name +MCU = atmega32a + +# Bootloader selection +BOOTLOADER = bootloadhid + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +WS2812_DRIVER = i2c From 802d7e5e150ab1fa0c811f5dc099b0e81a529595 Mon Sep 17 00:00:00 2001 From: Callum Hart <mini-ninja-64@users.noreply.github.com> Date: Fri, 19 Nov 2021 17:51:42 +0000 Subject: [PATCH 532/595] [Keyboard] Add Keebcats Denis PCB (#15154) --- keyboards/cutie_club/keebcats/denis/config.h | 50 +++++ keyboards/cutie_club/keebcats/denis/denis.c | 17 ++ keyboards/cutie_club/keebcats/denis/denis.h | 155 +++++++++++++ keyboards/cutie_club/keebcats/denis/info.json | 209 ++++++++++++++++++ .../keebcats/denis/keymaps/default/keymap.c | 28 +++ .../keebcats/denis/keymaps/via/keymap.c | 49 ++++ .../keebcats/denis/keymaps/via/rules.mk | 1 + keyboards/cutie_club/keebcats/denis/readme.md | 18 ++ keyboards/cutie_club/keebcats/denis/rules.mk | 23 ++ 9 files changed, 550 insertions(+) create mode 100644 keyboards/cutie_club/keebcats/denis/config.h create mode 100644 keyboards/cutie_club/keebcats/denis/denis.c create mode 100644 keyboards/cutie_club/keebcats/denis/denis.h create mode 100644 keyboards/cutie_club/keebcats/denis/info.json create mode 100644 keyboards/cutie_club/keebcats/denis/keymaps/default/keymap.c create mode 100644 keyboards/cutie_club/keebcats/denis/keymaps/via/keymap.c create mode 100644 keyboards/cutie_club/keebcats/denis/keymaps/via/rules.mk create mode 100644 keyboards/cutie_club/keebcats/denis/readme.md create mode 100644 keyboards/cutie_club/keebcats/denis/rules.mk diff --git a/keyboards/cutie_club/keebcats/denis/config.h b/keyboards/cutie_club/keebcats/denis/config.h new file mode 100644 index 0000000000..473b690634 --- /dev/null +++ b/keyboards/cutie_club/keebcats/denis/config.h @@ -0,0 +1,50 @@ +/* Copyright 2021 Cutie Club + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFB9C +#define PRODUCT_ID 0xB260 +#define DEVICE_VER 0x0000 +#define MANUFACTURER Cutie Club +#define PRODUCT Keebcats Denis 60% + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 15 + +/* + * Keyboard Matrix Assignments + */ +#define MATRIX_ROW_PINS { B2, D0, F5, F4, F1 } +#define MATRIX_COL_PINS { E6, F6, F7, C7, C6, B6, B5, B4, D7, D6, D4, D5, D3, D2, D1 } +#define UNUSED_PINS { B0, B1, B7 } + +/* COL2ROW, ROW2COL*/ +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +#define LED_CAPS_LOCK_PIN F0 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE diff --git a/keyboards/cutie_club/keebcats/denis/denis.c b/keyboards/cutie_club/keebcats/denis/denis.c new file mode 100644 index 0000000000..c661e8cbb5 --- /dev/null +++ b/keyboards/cutie_club/keebcats/denis/denis.c @@ -0,0 +1,17 @@ +/* Copyright 2021 Cutie Club + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "denis.h" diff --git a/keyboards/cutie_club/keebcats/denis/denis.h b/keyboards/cutie_club/keebcats/denis/denis.h new file mode 100644 index 0000000000..7ba152b8ea --- /dev/null +++ b/keyboards/cutie_club/keebcats/denis/denis.h @@ -0,0 +1,155 @@ +/* Copyright 2021 Cutie Club + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "quantum.h" + +#define LAYOUT_all( \ + k00_00, k00_01, k00_02, k00_03, k00_04, k00_05, k00_06, k00_07, k00_08, k00_09, k00_10, k00_11, k00_12, k00_13, k00_14, \ + k01_00, k01_01, k01_02, k01_03, k01_04, k01_05, k01_06, k01_07, k01_08, k01_09, k01_10, k01_11, k01_12, k01_13, \ + k02_00, k02_01, k02_02, k02_03, k02_04, k02_05, k02_06, k02_07, k02_08, k02_09, k02_10, k02_11, k02_12, k02_13, \ + k03_00, k03_01, k03_02, k03_03, k03_04, k03_05, k03_06, k03_07, k03_08, k03_09, k03_10, k03_11, k03_12, k03_13, \ + k04_00, k04_01, k04_02, k04_04, k04_06, k04_08, k04_10, k04_11, k04_12, k04_13 \ +) \ +{ \ + { k00_00, k00_01, k00_02, k00_03, k00_04, k00_05, k00_06, k00_07, k00_08, k00_09, k00_10, k00_11, k00_12, k00_13, k00_14 }, \ + { k01_00, k01_01, k01_02, k01_03, k01_04, k01_05, k01_06, k01_07, k01_08, k01_09, k01_10, k01_11, k01_12, k01_13, KC_NO }, \ + { k02_00, k02_01, k02_02, k02_03, k02_04, k02_05, k02_06, k02_07, k02_08, k02_09, k02_10, k02_11, k02_12, k02_13, KC_NO }, \ + { k03_00, k03_01, k03_02, k03_03, k03_04, k03_05, k03_06, k03_07, k03_08, k03_09, k03_10, k03_11, k03_12, k03_13, KC_NO }, \ + { k04_00, k04_01, k04_02, KC_NO, k04_04, KC_NO, k04_06, KC_NO, k04_08, KC_NO, k04_10, k04_11, k04_12, k04_13, KC_NO } \ +} + +#define LAYOUT_60_ansi( \ + k00_00, k00_01, k00_02, k00_03, k00_04, k00_05, k00_06, k00_07, k00_08, k00_09, k00_10, k00_11, k00_12, k00_14, \ + k01_00, k01_01, k01_02, k01_03, k01_04, k01_05, k01_06, k01_07, k01_08, k01_09, k01_10, k01_11, k01_12, k01_13, \ + k02_00, k02_01, k02_02, k02_03, k02_04, k02_05, k02_06, k02_07, k02_08, k02_09, k02_10, k02_11, k02_13, \ + k03_00, k03_02, k03_03, k03_04, k03_05, k03_06, k03_07, k03_08, k03_09, k03_10, k03_11, k03_12, \ + k04_00, k04_01, k04_02, k04_06, k04_10, k04_11, k04_12, k04_13 \ +) \ +{ \ + { k00_00, k00_01, k00_02, k00_03, k00_04, k00_05, k00_06, k00_07, k00_08, k00_09, k00_10, k00_11, k00_12, KC_NO, k00_14 }, \ + { k01_00, k01_01, k01_02, k01_03, k01_04, k01_05, k01_06, k01_07, k01_08, k01_09, k01_10, k01_11, k01_12, k01_13, KC_NO }, \ + { k02_00, k02_01, k02_02, k02_03, k02_04, k02_05, k02_06, k02_07, k02_08, k02_09, k02_10, k02_11, KC_NO, k02_13, KC_NO }, \ + { k03_00, KC_NO, k03_02, k03_03, k03_04, k03_05, k03_06, k03_07, k03_08, k03_09, k03_10, k03_11, k03_12, KC_NO, KC_NO }, \ + { k04_00, k04_01, k04_02, KC_NO, KC_NO, KC_NO, k04_06, KC_NO, KC_NO, KC_NO, k04_10, k04_11, k04_12, k04_13, KC_NO } \ +} + +#define LAYOUT_60_ansi_split_bs_rshift( \ + k00_00, k00_01, k00_02, k00_03, k00_04, k00_05, k00_06, k00_07, k00_08, k00_09, k00_10, k00_11, k00_12, k00_13, k00_14, \ + k01_00, k01_01, k01_02, k01_03, k01_04, k01_05, k01_06, k01_07, k01_08, k01_09, k01_10, k01_11, k01_12, k01_13, \ + k02_00, k02_01, k02_02, k02_03, k02_04, k02_05, k02_06, k02_07, k02_08, k02_09, k02_10, k02_11, k02_13, \ + k03_00, k03_02, k03_03, k03_04, k03_05, k03_06, k03_07, k03_08, k03_09, k03_10, k03_11, k03_12, k03_13, \ + k04_00, k04_01, k04_02, k04_06, k04_10, k04_11, k04_12, k04_13 \ +) \ +{ \ + { k00_00, k00_01, k00_02, k00_03, k00_04, k00_05, k00_06, k00_07, k00_08, k00_09, k00_10, k00_11, k00_12, k00_13, k00_14 }, \ + { k01_00, k01_01, k01_02, k01_03, k01_04, k01_05, k01_06, k01_07, k01_08, k01_09, k01_10, k01_11, k01_12, k01_13, KC_NO }, \ + { k02_00, k02_01, k02_02, k02_03, k02_04, k02_05, k02_06, k02_07, k02_08, k02_09, k02_10, k02_11, KC_NO, k02_13, KC_NO }, \ + { k03_00, KC_NO, k03_02, k03_03, k03_04, k03_05, k03_06, k03_07, k03_08, k03_09, k03_10, k03_11, k03_12, k03_13, KC_NO }, \ + { k04_00, k04_01, k04_02, KC_NO, KC_NO, KC_NO, k04_06, KC_NO, KC_NO, KC_NO, k04_10, k04_11, k04_12, k04_13, KC_NO } \ +} + +#define LAYOUT_60_ansi_tsangan( \ + k00_00, k00_01, k00_02, k00_03, k00_04, k00_05, k00_06, k00_07, k00_08, k00_09, k00_10, k00_11, k00_12, k00_14, \ + k01_00, k01_01, k01_02, k01_03, k01_04, k01_05, k01_06, k01_07, k01_08, k01_09, k01_10, k01_11, k01_12, k01_13, \ + k02_00, k02_01, k02_02, k02_03, k02_04, k02_05, k02_06, k02_07, k02_08, k02_09, k02_10, k02_11, k02_13, \ + k03_00, k03_02, k03_03, k03_04, k03_05, k03_06, k03_07, k03_08, k03_09, k03_10, k03_11, k03_12, \ + k04_00, k04_01, k04_02, k04_06, k04_11, k04_12, k04_13 \ +) \ +{ \ + { k00_00, k00_01, k00_02, k00_03, k00_04, k00_05, k00_06, k00_07, k00_08, k00_09, k00_10, k00_11, k00_12, KC_NO, k00_14 }, \ + { k01_00, k01_01, k01_02, k01_03, k01_04, k01_05, k01_06, k01_07, k01_08, k01_09, k01_10, k01_11, k01_12, k01_13, KC_NO }, \ + { k02_00, k02_01, k02_02, k02_03, k02_04, k02_05, k02_06, k02_07, k02_08, k02_09, k02_10, k02_11, KC_NO, k02_13, KC_NO }, \ + { k03_00, KC_NO, k03_02, k03_03, k03_04, k03_05, k03_06, k03_07, k03_08, k03_09, k03_10, k03_11, k03_12, KC_NO, KC_NO }, \ + { k04_00, k04_01, k04_02, KC_NO, KC_NO, KC_NO, k04_06, KC_NO, KC_NO, KC_NO, KC_NO, k04_11, k04_12, k04_13, KC_NO } \ +} + +#define LAYOUT_60_hhkb( \ + k00_00, k00_01, k00_02, k00_03, k00_04, k00_05, k00_06, k00_07, k00_08, k00_09, k00_10, k00_11, k00_12, k00_13, k00_14, \ + k01_00, k01_01, k01_02, k01_03, k01_04, k01_05, k01_06, k01_07, k01_08, k01_09, k01_10, k01_11, k01_12, k01_13, \ + k02_00, k02_01, k02_02, k02_03, k02_04, k02_05, k02_06, k02_07, k02_08, k02_09, k02_10, k02_11, k02_13, \ + k03_00, k03_02, k03_03, k03_04, k03_05, k03_06, k03_07, k03_08, k03_09, k03_10, k03_11, k03_12, k03_13, \ + k04_01, k04_02, k04_06, k04_11, k04_12 \ +) \ +{ \ + { k00_00, k00_01, k00_02, k00_03, k00_04, k00_05, k00_06, k00_07, k00_08, k00_09, k00_10, k00_11, k00_12, k00_13, k00_14 }, \ + { k01_00, k01_01, k01_02, k01_03, k01_04, k01_05, k01_06, k01_07, k01_08, k01_09, k01_10, k01_11, k01_12, k01_13, KC_NO }, \ + { k02_00, k02_01, k02_02, k02_03, k02_04, k02_05, k02_06, k02_07, k02_08, k02_09, k02_10, k02_11, KC_NO, k02_13, KC_NO }, \ + { k03_00, KC_NO, k03_02, k03_03, k03_04, k03_05, k03_06, k03_07, k03_08, k03_09, k03_10, k03_11, k03_12, k03_13, KC_NO }, \ + { KC_NO, k04_01, k04_02, KC_NO, KC_NO, KC_NO, k04_06, KC_NO, KC_NO, KC_NO, KC_NO, k04_11, k04_12, KC_NO, KC_NO } \ +} + +#define LAYOUT_60_tsangan_hhkb( \ + k00_00, k00_01, k00_02, k00_03, k00_04, k00_05, k00_06, k00_07, k00_08, k00_09, k00_10, k00_11, k00_12, k00_13, k00_14, \ + k01_00, k01_01, k01_02, k01_03, k01_04, k01_05, k01_06, k01_07, k01_08, k01_09, k01_10, k01_11, k01_12, k01_13, \ + k02_00, k02_01, k02_02, k02_03, k02_04, k02_05, k02_06, k02_07, k02_08, k02_09, k02_10, k02_11, k02_13, \ + k03_00, k03_02, k03_03, k03_04, k03_05, k03_06, k03_07, k03_08, k03_09, k03_10, k03_11, k03_12, k03_13, \ + k04_00, k04_01, k04_02, k04_06, k04_11, k04_12, k04_13 \ +) \ +{ \ + { k00_00, k00_01, k00_02, k00_03, k00_04, k00_05, k00_06, k00_07, k00_08, k00_09, k00_10, k00_11, k00_12, k00_13, k00_14 }, \ + { k01_00, k01_01, k01_02, k01_03, k01_04, k01_05, k01_06, k01_07, k01_08, k01_09, k01_10, k01_11, k01_12, k01_13, KC_NO }, \ + { k02_00, k02_01, k02_02, k02_03, k02_04, k02_05, k02_06, k02_07, k02_08, k02_09, k02_10, k02_11, KC_NO, k02_13, KC_NO }, \ + { k03_00, KC_NO, k03_02, k03_03, k03_04, k03_05, k03_06, k03_07, k03_08, k03_09, k03_10, k03_11, k03_12, k03_13, KC_NO }, \ + { k04_00, k04_01, k04_02, KC_NO, KC_NO, KC_NO, k04_06, KC_NO, KC_NO, KC_NO, KC_NO, k04_11, k04_12, k04_13, KC_NO } \ +} + + +#define LAYOUT_60_iso( \ + k00_00, k00_01, k00_02, k00_03, k00_04, k00_05, k00_06, k00_07, k00_08, k00_09, k00_10, k00_11, k00_12, k00_14, \ + k01_00, k01_01, k01_02, k01_03, k01_04, k01_05, k01_06, k01_07, k01_08, k01_09, k01_10, k01_11, k01_12, \ + k02_00, k02_01, k02_02, k02_03, k02_04, k02_05, k02_06, k02_07, k02_08, k02_09, k02_10, k02_11, k02_12, k02_13, \ + k03_00, k03_01, k03_02, k03_03, k03_04, k03_05, k03_06, k03_07, k03_08, k03_09, k03_10, k03_11, k03_12, \ + k04_00, k04_01, k04_02, k04_06, k04_10, k04_11, k04_12, k04_13 \ +) \ +{ \ + { k00_00, k00_01, k00_02, k00_03, k00_04, k00_05, k00_06, k00_07, k00_08, k00_09, k00_10, k00_11, k00_12, KC_NO, k00_14 }, \ + { k01_00, k01_01, k01_02, k01_03, k01_04, k01_05, k01_06, k01_07, k01_08, k01_09, k01_10, k01_11, k01_12, KC_NO, KC_NO }, \ + { k02_00, k02_01, k02_02, k02_03, k02_04, k02_05, k02_06, k02_07, k02_08, k02_09, k02_10, k02_11, k02_12, k02_13, KC_NO }, \ + { k03_00, k03_01, k03_02, k03_03, k03_04, k03_05, k03_06, k03_07, k03_08, k03_09, k03_10, k03_11, k03_12, KC_NO, KC_NO }, \ + { k04_00, k04_01, k04_02, KC_NO, KC_NO, KC_NO, k04_06, KC_NO, KC_NO, KC_NO, k04_10, k04_11, k04_12, k04_13, KC_NO } \ +} + +#define LAYOUT_60_iso_split_bs_rshift( \ + k00_00, k00_01, k00_02, k00_03, k00_04, k00_05, k00_06, k00_07, k00_08, k00_09, k00_10, k00_11, k00_12, k00_13, k00_14, \ + k01_00, k01_01, k01_02, k01_03, k01_04, k01_05, k01_06, k01_07, k01_08, k01_09, k01_10, k01_11, k01_12, \ + k02_00, k02_01, k02_02, k02_03, k02_04, k02_05, k02_06, k02_07, k02_08, k02_09, k02_10, k02_11, k02_12, k02_13, \ + k03_00, k03_01, k03_02, k03_03, k03_04, k03_05, k03_06, k03_07, k03_08, k03_09, k03_10, k03_11, k03_12, k03_13, \ + k04_00, k04_01, k04_02, k04_06, k04_10, k04_11, k04_12, k04_13 \ +) \ +{ \ + { k00_00, k00_01, k00_02, k00_03, k00_04, k00_05, k00_06, k00_07, k00_08, k00_09, k00_10, k00_11, k00_12, k00_13, k00_14 }, \ + { k01_00, k01_01, k01_02, k01_03, k01_04, k01_05, k01_06, k01_07, k01_08, k01_09, k01_10, k01_11, k01_12, KC_NO, KC_NO }, \ + { k02_00, k02_01, k02_02, k02_03, k02_04, k02_05, k02_06, k02_07, k02_08, k02_09, k02_10, k02_11, k02_12, k02_13, KC_NO }, \ + { k03_00, k03_01, k03_02, k03_03, k03_04, k03_05, k03_06, k03_07, k03_08, k03_09, k03_10, k03_11, k03_12, k03_13, KC_NO }, \ + { k04_00, k04_01, k04_02, KC_NO, KC_NO, KC_NO, k04_06, KC_NO, KC_NO, KC_NO, k04_10, k04_11, k04_12, k04_13, KC_NO } \ +} + +#define LAYOUT_60_iso_tsangan( \ + k00_00, k00_01, k00_02, k00_03, k00_04, k00_05, k00_06, k00_07, k00_08, k00_09, k00_10, k00_11, k00_12, k00_14, \ + k01_00, k01_01, k01_02, k01_03, k01_04, k01_05, k01_06, k01_07, k01_08, k01_09, k01_10, k01_11, k01_12, \ + k02_00, k02_01, k02_02, k02_03, k02_04, k02_05, k02_06, k02_07, k02_08, k02_09, k02_10, k02_11, k02_12, k02_13, \ + k03_00, k03_01, k03_02, k03_03, k03_04, k03_05, k03_06, k03_07, k03_08, k03_09, k03_10, k03_11, k03_12, \ + k04_00, k04_01, k04_02, k04_06, k04_11, k04_12, k04_13 \ +) \ +{ \ + { k00_00, k00_01, k00_02, k00_03, k00_04, k00_05, k00_06, k00_07, k00_08, k00_09, k00_10, k00_11, k00_12, KC_NO, k00_14 }, \ + { k01_00, k01_01, k01_02, k01_03, k01_04, k01_05, k01_06, k01_07, k01_08, k01_09, k01_10, k01_11, k01_12, KC_NO, KC_NO }, \ + { k02_00, k02_01, k02_02, k02_03, k02_04, k02_05, k02_06, k02_07, k02_08, k02_09, k02_10, k02_11, k02_12, k02_13, KC_NO }, \ + { k03_00, k03_01, k03_02, k03_03, k03_04, k03_05, k03_06, k03_07, k03_08, k03_09, k03_10, k03_11, k03_12, KC_NO, KC_NO }, \ + { k04_00, k04_01, k04_02, KC_NO, KC_NO, KC_NO, k04_06, KC_NO, KC_NO, KC_NO, KC_NO, k04_11, k04_12, k04_13, KC_NO } \ +} diff --git a/keyboards/cutie_club/keebcats/denis/info.json b/keyboards/cutie_club/keebcats/denis/info.json new file mode 100644 index 0000000000..a19a16a15c --- /dev/null +++ b/keyboards/cutie_club/keebcats/denis/info.json @@ -0,0 +1,209 @@ +{ + "keyboard_name": "Keebcats Denis", + "url": "", + "maintainer": "Cutie Club", + "layouts": { + "LAYOUT_all": { + "layout": [ + { "x": 0, "y": 0 }, + { "x": 1, "y": 0 }, + { "x": 2, "y": 0 }, + { "x": 3, "y": 0 }, + { "x": 4, "y": 0 }, + { "x": 5, "y": 0 }, + { "x": 6, "y": 0 }, + { "x": 7, "y": 0 }, + { "x": 8, "y": 0 }, + { "x": 9, "y": 0 }, + { "x": 10, "y": 0 }, + { "x": 11, "y": 0 }, + { "x": 12, "y": 0 }, + { "x": 13, "y": 0 }, + { "x": 14, "y": 0 }, + { "x": 0, "y": 1, "w": 1.5 }, + { "x": 1.5, "y": 1 }, + { "x": 2.5, "y": 1 }, + { "x": 3.5, "y": 1 }, + { "x": 4.5, "y": 1 }, + { "x": 5.5, "y": 1 }, + { "x": 6.5, "y": 1 }, + { "x": 7.5, "y": 1 }, + { "x": 8.5, "y": 1 }, + { "x": 9.5, "y": 1 }, + { "x": 10.5, "y": 1 }, + { "x": 11.5, "y": 1 }, + { "x": 12.5, "y": 1 }, + { "x": 13.5, "y": 1, "w": 1.5 }, + { "x": 0, "y": 2, "w": 1.75 }, + { "x": 1.75, "y": 2 }, + { "x": 2.75, "y": 2 }, + { "x": 3.75, "y": 2 }, + { "x": 4.75, "y": 2 }, + { "x": 5.75, "y": 2 }, + { "x": 6.75, "y": 2 }, + { "x": 7.75, "y": 2 }, + { "x": 8.75, "y": 2 }, + { "x": 9.75, "y": 2 }, + { "x": 10.75, "y": 2 }, + { "x": 11.75, "y": 2 }, + { "x": 12.75, "y": 2 }, + { "x": 14, "y": 2 }, + { "x": 0, "y": 3, "w": 1.25 }, + { "x": 1.25, "y": 3 }, + { "x": 2.25, "y": 3 }, + { "x": 3.25, "y": 3 }, + { "x": 4.25, "y": 3 }, + { "x": 5.25, "y": 3 }, + { "x": 6.25, "y": 3 }, + { "x": 7.25, "y": 3 }, + { "x": 8.25, "y": 3 }, + { "x": 9.25, "y": 3 }, + { "x": 10.25, "y": 3 }, + { "x": 11.25, "y": 3 }, + { "x": 12.25, "y": 3, "w": 1.75 }, + { "x": 14, "y": 3 }, + { "x": 0, "y": 4, "w": 1.25 }, + { "x": 1.25, "y": 4, "w": 1.25 }, + { "x": 2.5, "y": 4, "w": 1.25 }, + { "x": 3.75, "y": 4, "w": 2.25 }, + { "x": 6, "y": 4, "w": 1.25 }, + { "x": 7.25, "y": 4, "w": 2.75 }, + { "x": 10, "y": 4, "w": 1.25 }, + { "x": 11.25, "y": 4, "w": 1.25 }, + { "x": 12.5, "y": 4, "w": 1.25 }, + { "x": 13.75, "y": 4, "w": 1.25 } + ] + }, + "LAYOUT_60_iso": { + "layout": [ + { "x": 0, "y": 0 }, + { "x": 1, "y": 0 }, + { "x": 2, "y": 0 }, + { "x": 3, "y": 0 }, + { "x": 4, "y": 0 }, + { "x": 5, "y": 0 }, + { "x": 6, "y": 0 }, + { "x": 7, "y": 0 }, + { "x": 8, "y": 0 }, + { "x": 9, "y": 0 }, + { "x": 10, "y": 0 }, + { "x": 11, "y": 0 }, + { "x": 12, "y": 0 }, + { "x": 13, "y": 0, "w": 2 }, + { "x": 0, "y": 1, "w": 1.5 }, + { "x": 1.5, "y": 1 }, + { "x": 2.5, "y": 1 }, + { "x": 3.5, "y": 1 }, + { "x": 4.5, "y": 1 }, + { "x": 5.5, "y": 1 }, + { "x": 6.5, "y": 1 }, + { "x": 7.5, "y": 1 }, + { "x": 8.5, "y": 1 }, + { "x": 9.5, "y": 1 }, + { "x": 10.5, "y": 1 }, + { "x": 11.5, "y": 1 }, + { "x": 12.5, "y": 1 }, + { "x": 13.75, "y": 1, "w": 1.25, "h": 2 }, + { "x": 0, "y": 2, "w": 1.75 }, + { "x": 1.75, "y": 2 }, + { "x": 2.75, "y": 2 }, + { "x": 3.75, "y": 2 }, + { "x": 4.75, "y": 2 }, + { "x": 5.75, "y": 2 }, + { "x": 6.75, "y": 2 }, + { "x": 7.75, "y": 2 }, + { "x": 8.75, "y": 2 }, + { "x": 9.75, "y": 2 }, + { "x": 10.75, "y": 2 }, + { "x": 11.75, "y": 2 }, + { "x": 12.75, "y": 2 }, + { "x": 0, "y": 3, "w": 1.25 }, + { "x": 1.25, "y": 3 }, + { "x": 2.25, "y": 3 }, + { "x": 3.25, "y": 3 }, + { "x": 4.25, "y": 3 }, + { "x": 5.25, "y": 3 }, + { "x": 6.25, "y": 3 }, + { "x": 7.25, "y": 3 }, + { "x": 8.25, "y": 3 }, + { "x": 9.25, "y": 3 }, + { "x": 10.25, "y": 3 }, + { "x": 11.25, "y": 3 }, + { "x": 12.25, "y": 3, "w": 2.75 }, + { "x": 0, "y": 4, "w": 1.25 }, + { "x": 1.25, "y": 4, "w": 1.25 }, + { "x": 2.5, "y": 4, "w": 1.25 }, + { "x": 3.75, "y": 4, "w": 6.25 }, + { "x": 10, "y": 4, "w": 1.25 }, + { "x": 11.25, "y": 4, "w": 1.25 }, + { "x": 12.5, "y": 4, "w": 1.25 }, + { "x": 13.75, "y": 4, "w": 1.25 } + ] + }, + "LAYOUT_60_ansi": { + "layout": [ + { "x": 0, "y": 0 }, + { "x": 1, "y": 0 }, + { "x": 2, "y": 0 }, + { "x": 3, "y": 0 }, + { "x": 4, "y": 0 }, + { "x": 5, "y": 0 }, + { "x": 6, "y": 0 }, + { "x": 7, "y": 0 }, + { "x": 8, "y": 0 }, + { "x": 9, "y": 0 }, + { "x": 10, "y": 0 }, + { "x": 11, "y": 0 }, + { "x": 12, "y": 0 }, + { "x": 13, "y": 0, "w": 2 }, + { "x": 0, "y": 1, "w": 1.5 }, + { "x": 1.5, "y": 1 }, + { "x": 2.5, "y": 1 }, + { "x": 3.5, "y": 1 }, + { "x": 4.5, "y": 1 }, + { "x": 5.5, "y": 1 }, + { "x": 6.5, "y": 1 }, + { "x": 7.5, "y": 1 }, + { "x": 8.5, "y": 1 }, + { "x": 9.5, "y": 1 }, + { "x": 10.5, "y": 1 }, + { "x": 11.5, "y": 1 }, + { "x": 12.5, "y": 1 }, + { "x": 13.75, "y": 1, "w": 1.25 }, + { "x": 0, "y": 2, "w": 1.75 }, + { "x": 1.75, "y": 2 }, + { "x": 2.75, "y": 2 }, + { "x": 3.75, "y": 2 }, + { "x": 4.75, "y": 2 }, + { "x": 5.75, "y": 2 }, + { "x": 6.75, "y": 2 }, + { "x": 7.75, "y": 2 }, + { "x": 8.75, "y": 2 }, + { "x": 9.75, "y": 2 }, + { "x": 10.75, "y": 2 }, + { "x": 11.75, "y": 2 }, + { "x": 12.75, "y": 2, "w": 2.25 }, + { "x": 0, "y": 3, "w": 2.25 }, + { "x": 2.25, "y": 3 }, + { "x": 3.25, "y": 3 }, + { "x": 4.25, "y": 3 }, + { "x": 5.25, "y": 3 }, + { "x": 6.25, "y": 3 }, + { "x": 7.25, "y": 3 }, + { "x": 8.25, "y": 3 }, + { "x": 9.25, "y": 3 }, + { "x": 10.25, "y": 3 }, + { "x": 11.25, "y": 3 }, + { "x": 12.25, "y": 3, "w": 2.75 }, + { "x": 0, "y": 4, "w": 1.25 }, + { "x": 1.25, "y": 4, "w": 1.25 }, + { "x": 2.5, "y": 4, "w": 1.25 }, + { "x": 3.75, "y": 4, "w": 6.25 }, + { "x": 10, "y": 4, "w": 1.25 }, + { "x": 11.25, "y": 4, "w": 1.25 }, + { "x": 12.5, "y": 4, "w": 1.25 }, + { "x": 13.75, "y": 4, "w": 1.25 } + ] + } + } +} diff --git a/keyboards/cutie_club/keebcats/denis/keymaps/default/keymap.c b/keyboards/cutie_club/keebcats/denis/keymaps/default/keymap.c new file mode 100644 index 0000000000..3dbf5dc5b5 --- /dev/null +++ b/keyboards/cutie_club/keebcats/denis/keymaps/default/keymap.c @@ -0,0 +1,28 @@ +/* Copyright 2021 Cutie Club + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTRL + ) +}; diff --git a/keyboards/cutie_club/keebcats/denis/keymaps/via/keymap.c b/keyboards/cutie_club/keebcats/denis/keymaps/via/keymap.c new file mode 100644 index 0000000000..b7fa4f154f --- /dev/null +++ b/keyboards/cutie_club/keebcats/denis/keymaps/via/keymap.c @@ -0,0 +1,49 @@ +/* Copyright 2021 Cutie Club + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTRL + ), + [1] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), + [3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/cutie_club/keebcats/denis/keymaps/via/rules.mk b/keyboards/cutie_club/keebcats/denis/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/cutie_club/keebcats/denis/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/cutie_club/keebcats/denis/readme.md b/keyboards/cutie_club/keebcats/denis/readme.md new file mode 100644 index 0000000000..5f734e7e93 --- /dev/null +++ b/keyboards/cutie_club/keebcats/denis/readme.md @@ -0,0 +1,18 @@ +# Denis + +* Keyboard Maintainer: [Cutie Club](https://github.com/cutie-club/) +* Hardware Supported: Atmega32u4 based 60% PCB, with wide compatibility +* Hardware Availability: [Keebcats](https://keebcats.co.uk) + +## Bootloader + +Enter the bootloader in 2 ways with the default configuration: + +* **Bootmagic reset**: Hold down the key at top left key (matrix position 0,0) and plug the device in +* **Physical reset button**: Press the button marked reset on the back of the PCB + +Make example for this keyboard (after setting up your build environment): + + make cutie_club/keebcats/denis:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/cutie_club/keebcats/denis/rules.mk b/keyboards/cutie_club/keebcats/denis/rules.mk new file mode 100644 index 0000000000..07f5fabc06 --- /dev/null +++ b/keyboards/cutie_club/keebcats/denis/rules.mk @@ -0,0 +1,23 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable bootmagic +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output + +LAYOUTS = 60_iso_tsangan 60_iso_split_bs_rshift 60_iso 60_tsangan_hhkb 60_hhkb 60_ansi_tsangan 60_ansi_split_bs_rshift 60_ansi From 3491a386da7f428124cc0d6f729d40cd4595d784 Mon Sep 17 00:00:00 2001 From: Andy <demoded@hugaida.com> Date: Sat, 20 Nov 2021 06:52:15 +1300 Subject: [PATCH 533/595] [Keymap] Sofle RGB - fixed switch and numpad layers (#15094) --- keyboards/sofle/keymaps/rgb_default/keymap.c | 28 ++++++++++---------- 1 file changed, 14 insertions(+), 14 deletions(-) diff --git a/keyboards/sofle/keymaps/rgb_default/keymap.c b/keyboards/sofle/keymaps/rgb_default/keymap.c index 13edbc5207..0fba5515b7 100644 --- a/keyboards/sofle/keymaps/rgb_default/keymap.c +++ b/keyboards/sofle/keymaps/rgb_default/keymap.c @@ -256,9 +256,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { ), /* NUMPAD * ,-----------------------------------------. ,-----------------------------------------. - * | trans| | | | | | | F6 | F7 | F8 | F9 | F10 | F11 | + * | trans| | | | | | | |NumLck| | | | | * |------+------+------+------+------+------| |------+------+------+------+------+------| - * | ` | | | | | | | | 7 | 8 | 9 | * | F12 | + * | ` | | | | | | | ^ | 7 | 8 | 9 | * | | * |------+------+------+------+------+------| |------+------+------+------+------+------| * | trans| | | | | |-------. ,-------| - | 4 | 5 | 6 | | | | * |------+------+------+------+------+------| MUTE | | |------+------+------+------+------+------| @@ -270,27 +270,27 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { */ [_NUMPAD] = LAYOUT( //,------------------------------------------------. ,---------------------------------------------------. - _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,XXXXXXX, XXXXXXX, + _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, _______, KC_NLCK, XXXXXXX, XXXXXXX,XXXXXXX, XXXXXXX, //|------+-------+--------+--------+--------+------| |--------+-------+--------+--------+--------+---------| - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_CIRC, KC_P7, KC_P8, KC_P9, KC_ASTR, _______, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_CIRC, KC_P7, KC_P8, KC_P9, KC_ASTR, XXXXXXX, //|------+-------+--------+--------+--------+------| |--------+-------+--------+--------+--------+---------| XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MINS, KC_P4, KC_P5, KC_P6, KC_EQL, KC_PIPE, //|------+-------+--------+--------+--------+------| === | | === |--------+-------+--------+--------+--------+---------| - XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,_______, _______,KC_PLUS, KC_P1, KC_P2, KC_P3, KC_SLSH, _______, + XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,_______, _______,KC_PLUS, KC_P1, KC_P2, KC_P3, KC_SLSH, _______, //|------+-------+--------+--------+--------+------| === | | === |--------+-------+--------+--------+--------+---------| - _______, OSM(MOD_MEH), _______, _______, _______, _______, _______, KC_P0, KC_PDOT, _______ + _______, OSM(MOD_MEH), _______, _______, _______, _______, _______, KC_P0, KC_PDOT, _______ // \--------+--------+--------+---------+-------| |--------+---------+--------+---------+-------/ ), /* SWITCH * ,-----------------------------------------. ,-----------------------------------------. - * | cole | qwer | low |raise | adj |numpd | | | F7 | F8 | F9 | F10 | F11 | + * | | | | | | | | | | | | | | * |------+------+------+------+------+------| |------+------+------+------+------+------| - * | ` | | | | | | | | 7 | 8 | 9 | * | F12 | + * | qwer | cole |col_dh| low | raise| adj | |numpad| | | | |RESET | * |------+------+------+------+------+------| |------+------+------+------+------+------| - * | trans| | | | | |-------. ,-------| - | 4 | 5 | 6 | | | | + * | | | | | | |-------. ,-------| | | | | |EEP_RST| * |------+------+------+------+------+------| MUTE | | |------+------+------+------+------+------| - * | trans| | | | | |-------| |-------| + | 1 | 2 | 3 | \ | Shift| + * | SLEEP| | | | | |-------| |-------| | | | | | | * `-----------------------------------------/ / \ \-----------------------------------------' * | Bspc | WIN |LOWER | Enter| /Space / \Enter \ |SPACE | 0 | . | RAlt | * | | | | |/ / \ \ | | | | | @@ -301,13 +301,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { //,------------------------------------------------. ,---------------------------------------------------. _______, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX,XXXXXXX, XXXXXXX, //|------+-------+--------+--------+--------+------| |--------+-------+--------+--------+--------+---------| - TO(0), TO(1), TO(2), TO(3), TO(4), TO(5), KC_NO, TO(7), KC_NO, KC_NO, KC_NO, RESET, + TO(0), TO(1), TO(2), TO(3), TO(4), TO(5), TO(6), KC_NO, KC_NO, KC_NO, KC_NO, RESET, //|------+-------+--------+--------+--------+------| |--------+-------+--------+--------+--------+---------| - KC_NO, KC_NO, KC_BRIU, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, EEP_RST, + KC_NO, KC_NO, KC_BRIU, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, EEP_RST, //|------+-------+--------+--------+--------+------| === | | === |--------+-------+--------+--------+--------+---------| - KC_SYSTEM_SLEEP,KC_NO,KC_BRID,KC_NO,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, + KC_SYSTEM_SLEEP,KC_NO,KC_NO,KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, //|------+-------+--------+--------+--------+------| === | | === |--------+-------+--------+--------+--------+---------| - KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO + KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO // \--------+--------+--------+---------+-------| |--------+---------+--------+---------+-------/ ), From fa35df037485226e73899f93c3fcd0ecb2b54003 Mon Sep 17 00:00:00 2001 From: HellTM <lisca94@gmail.com> Date: Fri, 19 Nov 2021 17:52:33 +0000 Subject: [PATCH 534/595] [Keymap] 3w6 helltm keymap (with ascii art) (#15146) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@gmail.com> --- keyboards/3w6/keymaps/helltm/keymap.c | 160 ++++++++++++++++++++++++++ 1 file changed, 160 insertions(+) create mode 100644 keyboards/3w6/keymaps/helltm/keymap.c diff --git a/keyboards/3w6/keymaps/helltm/keymap.c b/keyboards/3w6/keymaps/helltm/keymap.c new file mode 100644 index 0000000000..507085081f --- /dev/null +++ b/keyboards/3w6/keymaps/helltm/keymap.c @@ -0,0 +1,160 @@ +/* Copyright 2021 HellSingCoder + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +enum layers +{ + _ALPHA_QWERTY = 0, + _SYM, + _NAV, + _NUM, +}; + +enum custom_keycodes { + KC_THUMB_SWAP, +}; + +/* Space Enter swap */ +bool swap_space_enter = false; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + /* + * QWERTY + * _____ _____ + * .-----| E |-----._____ _____.-----| I |-----. + * .-----| W |_____| R | T | | Y | U |_____| O |-----. + * | Q |-----| D |-----|_____| |_____|-----| K |-----| P | + * |-----| S |_____| F | G | | H | J |_____| L |-----| + * | A |-----| C |-----|_____| |_____|-----| , < |-----| ; : | + * |-----| X |_____| V | B | | N | M |_____| . > |-----| + * | Z |-----' '-----|_____| |_____|-----' '-----| / ? | + * '-----' .-----. _____ .-.._ _..-. _____ .-----. '-----' + * SHIFT | WIN ||CTRL | / / \ \ | BSp || Del | SHIFT + * '-----':_____|/ ENT / \ SPC \|_____:'-----' + * NUM '--.._/ \_..--' NAV SYM + */ + [_ALPHA_QWERTY] = LAYOUT( + KC_Q, KC_W , KC_E , KC_R , KC_T , KC_Y , KC_U , KC_I , KC_O , KC_P , + KC_A, KC_S , KC_D , KC_F , KC_G , KC_H , KC_J , KC_K , KC_L , KC_SCLN , + LSFT_T(KC_Z), KC_X , KC_C , KC_V , KC_B , KC_N , KC_M , KC_COMM, KC_DOT , RSFT_T(KC_SLSH), + LT(_NUM, KC_LGUI), KC_LCTRL, KC_ENT, KC_SPC, LT(_NAV, KC_BSPC), LT(_SYM, KC_DEL) + ), + + /* + * Symbols + * _____ _____ + * .-----| # |-----._____ _____.-----| * |-----. + * .-----| @ |_____| $ | % | | ^ | & |_____| ( |-----. + * | ! |-----| |-----|_____| |_____|-----| [ { |-----| ) | + * |-----| |_____| | | | { | } |_____| ] } |-----| + * | ` ~ |-----| |-----|_____| |_____|-----| |-----| ' " | + * |-----| |_____| | | | - _ | = + |_____| | |-----| + * | ~ |-----' '-----|_____| |_____|-----' '-----| \ | | + * '-----' .-----. _____ .-.._ _..-. _____ .-----. '-----' + * SHIFT | ||CTRL | / / \ \ | BSp || | SHIFT + * '-----':_____|/ ENT / \ SPC \|_____:'-----' + * '--.._/ \_..--' + */ + [_SYM] = LAYOUT( + KC_EXLM, KC_AT , KC_HASH, KC_DLR , KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN , + KC_GRV , XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LCBR, KC_RCBR, KC_LBRC, KC_RBRC, KC_QUOT , + LSFT_T(KC_TILD), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_MINS, KC_EQL , XXXXXXX, KC_PIPE, RSFT_T(KC_BSLS), + XXXXXXX, _______, _______, _______, KC_BSPC, XXXXXXX + ), + + /* + * Navigation + * _____ _____ + * .-----|Mute |-----._____ _____.-----| Up |-----. + * .-----|VDown|_____| VUp | | | |PDown|_____| PUp |-----. + * | Esc |-----|Play |-----|_____| |_____|-----|Down |-----| BSp | + * |-----|Prev |_____|Next | | |Home |Left |_____|Right|-----| + * | Tab |-----|Stop |-----|_____| |_____|-----| |-----| ' " | + * |-----| |_____| |Swap | | | |_____| End |-----| + * | CPS |-----' '-----|_____| |_____|-----' '-----| Del | + * '-----' .-----. _____ .-.._ _..-. _____ .-----. '-----' + * SHIFT | ||CTRL | / / \ \ | BSp || | SHIFT + * '-----':_____|/ ENT / \ SPC \|_____:'-----' + * '--.._/ \_..--' + */ + [_NAV] = LAYOUT( + KC_ESC , KC_VOLD, KC_MUTE, KC_VOLU, XXXXXXX , XXXXXXX, KC_PGDN, KC_UP , KC_PGUP, KC_BSPC, + KC_TAB , KC_MPRV, KC_MPLY, KC_MNXT, XXXXXXX , KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_QUOT, + LSFT_T(KC_CAPS), XXXXXXX, KC_MSTP, XXXXXXX, KC_THUMB_SWAP, XXXXXXX, XXXXXXX, XXXXXXX, KC_END , RSFT_T(KC_DEL) , + XXXXXXX, _______, _______, _______, KC_BSPC, XXXXXXX + ), + + /* + * Numbers + * _____ _____ + * .-----| 3 |-----._____ _____.-----| 8 |-----. + * .-----| 2 |_____| 4 | 5 | | 6 | 7 |_____| 9 |-----. + * | 1 |-----| F3 |-----|_____| |_____|-----| F8 |-----| 0 | + * |-----| F2 |_____| F4 | F5 | | F6 | F7 |_____| F9 |-----| + * | F1 |-----| Scr |-----|_____| |_____|-----| |-----| F10 | + * |-----| TMg |_____| | | | | |_____| F11 |-----| + * |Shift|-----' '-----|_____| |_____|-----' '-----| F12 | + * '-----' .-----. _____ .-.._ _..-. _____ .-----. '-----' + * | ||CTRL | / / \ \ | BSp || | SHIFT + * '-----':_____|/ ENT / \ SPC \|_____:'-----' + * '--.._/ \_..--' + */ + [_NUM] = LAYOUT( + KC_1 , KC_2 , KC_3 , KC_4 , KC_5 , KC_6 , KC_7 , KC_8 , KC_9 , KC_0 , + KC_F1 , KC_F2 , KC_F3 , KC_F4 , KC_F5 , KC_F6 , KC_F7 , KC_F8 , KC_F9 , KC_F10 , + KC_LSFT, LCA(KC_DEL), SWIN(KC_S), XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_F11 , RSFT_T(KC_F12) , + XXXXXXX, _______, _______, _______, KC_BSPC, XXXXXXX + ), +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + + /* Space Enter swap */ + case KC_THUMB_SWAP: + if (record->event.pressed) { + unregister_code(KC_SPC); + unregister_code(KC_ENT); + swap_space_enter = !swap_space_enter; + } + return false; + break; + + case KC_ENT: + if (swap_space_enter) { + if (record->event.pressed) { + register_code(KC_SPC); + } else { + unregister_code(KC_SPC); + } + return false; + } + break; + case KC_SPC: + if (swap_space_enter) { + if (record->event.pressed) { + register_code(KC_ENT); + } else { + unregister_code(KC_ENT); + } + return false; + } + break; + } + return true; +} From 6b3b302dfe37151e1b54395f03716fb133b84c5f Mon Sep 17 00:00:00 2001 From: rhmokey <57172003+rhmokey@users.noreply.github.com> Date: Sat, 20 Nov 2021 01:53:00 +0800 Subject: [PATCH 535/595] [Keyboard] Add xox70 (#15098) --- keyboards/mokey/xox70/config.h | 36 +++ keyboards/mokey/xox70/info.json | 248 ++++++++++++++++++ .../mokey/xox70/keymaps/default/keymap.c | 35 +++ keyboards/mokey/xox70/keymaps/via/keymap.c | 47 ++++ keyboards/mokey/xox70/keymaps/via/rules.mk | 1 + keyboards/mokey/xox70/readme.md | 20 ++ keyboards/mokey/xox70/rules.mk | 21 ++ keyboards/mokey/xox70/xox70.c | 15 ++ keyboards/mokey/xox70/xox70.h | 65 +++++ 9 files changed, 488 insertions(+) create mode 100644 keyboards/mokey/xox70/config.h create mode 100644 keyboards/mokey/xox70/info.json create mode 100644 keyboards/mokey/xox70/keymaps/default/keymap.c create mode 100644 keyboards/mokey/xox70/keymaps/via/keymap.c create mode 100644 keyboards/mokey/xox70/keymaps/via/rules.mk create mode 100644 keyboards/mokey/xox70/readme.md create mode 100644 keyboards/mokey/xox70/rules.mk create mode 100644 keyboards/mokey/xox70/xox70.c create mode 100644 keyboards/mokey/xox70/xox70.h diff --git a/keyboards/mokey/xox70/config.h b/keyboards/mokey/xox70/config.h new file mode 100644 index 0000000000..f5c08c4480 --- /dev/null +++ b/keyboards/mokey/xox70/config.h @@ -0,0 +1,36 @@ +/* +Copyright 2021 Kyle McCreery +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0x6653 +#define PRODUCT_ID 0x3370 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Mokey +#define PRODUCT XOX 70 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 18 + +#define MATRIX_ROW_PINS { F7, B7, F5, F1, B0 } +#define MATRIX_COL_PINS { F6, C7, F4, F5, F1, B6, D0, D2, D3, D1, D7, D4, D5, D6, B4, B5, C6, B7 } +#define UNUSED_PINS + +#define DIODE_DIRECTION COL2ROW + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 diff --git a/keyboards/mokey/xox70/info.json b/keyboards/mokey/xox70/info.json new file mode 100644 index 0000000000..95089f6fc3 --- /dev/null +++ b/keyboards/mokey/xox70/info.json @@ -0,0 +1,248 @@ +{ + "keyboard_name": "xox70", + "url": "", + "maintainer": "Mokey", + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"k00", "x":0, "y":0}, + {"label":"k01", "x":1, "y":0}, + {"label":"k02", "x":2, "y":0}, + {"label":"k03", "x":3, "y":0}, + {"label":"k04", "x":4, "y":0}, + {"label":"k05", "x":5, "y":0}, + {"label":"k06", "x":6, "y":0}, + {"label":"k07", "x":7, "y":0}, + {"label":"k08", "x":8, "y":0}, + {"label":"k09", "x":9, "y":0}, + {"label":"k0a", "x":10, "y":0}, + {"label":"k0b", "x":11, "y":0}, + {"label":"k0c", "x":12, "y":0}, + {"label":"k0e", "x":13, "y":0, "w":2}, + {"label":"k0f", "x":15.25, "y":0}, + {"label":"k0g", "x":16.25, "y":0}, + {"label":"k0h", "x":17.25, "y":0}, + + {"label":"k10", "x":0, "y":1, "w":1.5}, + {"label":"k12", "x":1.5, "y":1}, + {"label":"k13", "x":2.5, "y":1}, + {"label":"k14", "x":3.5, "y":1}, + {"label":"k15", "x":4.5, "y":1}, + {"label":"k16", "x":5.5, "y":1}, + {"label":"k17", "x":6.5, "y":1}, + {"label":"k18", "x":7.5, "y":1}, + {"label":"k19", "x":8.5, "y":1}, + {"label":"k1a", "x":9.5, "y":1}, + {"label":"k1b", "x":10.5, "y":1}, + {"label":"k1c", "x":11.5, "y":1}, + {"label":"k1d", "x":12.5, "y":1}, + {"label":"k1e", "x":13.5, "y":1, "w":1.5}, + {"label":"k1f", "x":15.25, "y":1}, + {"label":"k1g", "x":16.25, "y":1}, + {"label":"k1h", "x":17.25, "y":1}, + + {"label":"k20", "x":0, "y":2, "w":1.75}, + {"label":"k22", "x":1.75, "y":2}, + {"label":"k23", "x":2.75, "y":2}, + {"label":"k24", "x":3.75, "y":2}, + {"label":"k25", "x":4.75, "y":2}, + {"label":"k26", "x":5.75, "y":2}, + {"label":"k27", "x":6.75, "y":2}, + {"label":"k28", "x":7.75, "y":2}, + {"label":"k29", "x":8.75, "y":2}, + {"label":"k2a", "x":9.75, "y":2}, + {"label":"k2b", "x":10.75, "y":2}, + {"label":"k2c", "x":11.75, "y":2}, + {"label":"k2d", "x":12.75, "y":2, "w":2.25}, + + {"label":"k30", "x":0, "y":3, "w":2.25}, + {"label":"k32", "x":2.25, "y":3}, + {"label":"k33", "x":3.25, "y":3}, + {"label":"k34", "x":4.25, "y":3}, + {"label":"k35", "x":5.25, "y":3}, + {"label":"k36", "x":6.25, "y":3}, + {"label":"k37", "x":7.25, "y":3}, + {"label":"k38", "x":8.25, "y":3}, + {"label":"k39", "x":9.25, "y":3}, + {"label":"k3a", "x":10.25, "y":3}, + {"label":"k3b", "x":11.25, "y":3}, + {"label":"k3d", "x":12.25, "y":3, "w":2.75}, + {"label":"k3g", "x":16.25, "y":3}, + + {"label":"k40", "x":0, "y":4, "w":1.25}, + {"label":"k41", "x":1.25, "y":4, "w":1.25}, + {"label":"k43", "x":2.5, "y":4, "w":1.25}, + {"label":"k46", "x":3.75, "y":4, "w":6.25}, + {"label":"k4a", "x":10, "y":4, "w":1.25}, + {"label":"k4b", "x":11.25, "y":4, "w":1.25}, + {"label":"k4d", "x":12.5, "y":4, "w":1.25}, + {"label":"k4e", "x":13.75, "y":4, "w":1.25}, + {"label":"k4f", "x":15.25, "y":4}, + {"label":"k4g", "x":16.25, "y":4}, + {"label":"k4h", "x":17.25, "y":4} + ] + }, + "LAYOUT_division_backspace":{ + "layout": [ + {"label":"k00", "x":0, "y":0}, + {"label":"k01", "x":1, "y":0}, + {"label":"k02", "x":2, "y":0}, + {"label":"k03", "x":3, "y":0}, + {"label":"k04", "x":4, "y":0}, + {"label":"k05", "x":5, "y":0}, + {"label":"k06", "x":6, "y":0}, + {"label":"k07", "x":7, "y":0}, + {"label":"k08", "x":8, "y":0}, + {"label":"k09", "x":9, "y":0}, + {"label":"k0a", "x":10, "y":0}, + {"label":"k0b", "x":11, "y":0}, + {"label":"k0c", "x":12, "y":0}, + {"label":"k0d", "x":13, "y":0}, + {"label":"k0e", "x":14, "y":0}, + {"label":"k0f", "x":15.25, "y":0}, + {"label":"k0g", "x":16.25, "y":0}, + {"label":"k0h", "x":17.25, "y":0}, + + {"label":"k10", "x":0, "y":1, "w":1.5}, + {"label":"k12", "x":1.5, "y":1}, + {"label":"k13", "x":2.5, "y":1}, + {"label":"k14", "x":3.5, "y":1}, + {"label":"k15", "x":4.5, "y":1}, + {"label":"k16", "x":5.5, "y":1}, + {"label":"k17", "x":6.5, "y":1}, + {"label":"k18", "x":7.5, "y":1}, + {"label":"k19", "x":8.5, "y":1}, + {"label":"k1a", "x":9.5, "y":1}, + {"label":"k1b", "x":10.5, "y":1}, + {"label":"k1c", "x":11.5, "y":1}, + {"label":"k1d", "x":12.5, "y":1}, + {"label":"k1f", "x":15.25, "y":1}, + {"label":"k1g", "x":16.25, "y":1}, + {"label":"k1h", "x":17.25, "y":1}, + + {"label":"k20", "x":0, "y":2, "w":1.75}, + {"label":"k22", "x":1.75, "y":2}, + {"label":"k23", "x":2.75, "y":2}, + {"label":"k24", "x":3.75, "y":2}, + {"label":"k25", "x":4.75, "y":2}, + {"label":"k26", "x":5.75, "y":2}, + {"label":"k27", "x":6.75, "y":2}, + {"label":"k28", "x":7.75, "y":2}, + {"label":"k29", "x":8.75, "y":2}, + {"label":"k2a", "x":9.75, "y":2}, + {"label":"k2b", "x":10.75, "y":2}, + {"label":"k2c", "x":11.75, "y":2}, + {"label":"k1e", "x":12.75, "y":2}, + {"label":"k2d", "x":13.75, "y":1, "w":1.25, "h": 2}, + + {"label":"k30", "x":0, "y":3, "w":1.25}, + {"label":"k31", "x":1.25, "y":3}, + {"label":"k32", "x":2.25, "y":3}, + {"label":"k33", "x":3.25, "y":3}, + {"label":"k34", "x":4.25, "y":3}, + {"label":"k35", "x":5.25, "y":3}, + {"label":"k36", "x":6.25, "y":3}, + {"label":"k37", "x":7.25, "y":3}, + {"label":"k38", "x":8.25, "y":3}, + {"label":"k39", "x":9.25, "y":3}, + {"label":"k3a", "x":10.25, "y":3}, + {"label":"k3b", "x":11.25, "y":3}, + {"label":"k3d", "x":12.25, "y":3, "w":1.75}, + {"label":"k3e", "x":14, "y":3}, + {"label":"k3g", "x":16.25, "y":3}, + + {"label":"k40", "x":0, "y":4, "w":1.5}, + {"label":"k41", "x":1.25, "y":4}, + {"label":"k43", "x":2.5, "y":4, "w":1.5}, + {"label":"k46", "x":4, "y":4, "w":7}, + {"label":"k4b", "x":11, "y":4, "w":1.5}, + {"label":"k4d", "x":12.5, "y":4}, + {"label":"k4e", "x":13.75, "y":4, "w":1.5}, + {"label":"k4f", "x":15.25, "y":4}, + {"label":"k4g", "x":16.25, "y":4}, + {"label":"k4h", "x":17.25, "y":4} + ] + }, + "LAYOUT_iso":{ + "layout": [ + {"label":"k00", "x":0, "y":0}, + {"label":"k01", "x":1, "y":0}, + {"label":"k02", "x":2, "y":0}, + {"label":"k03", "x":3, "y":0}, + {"label":"k04", "x":4, "y":0}, + {"label":"k05", "x":5, "y":0}, + {"label":"k06", "x":6, "y":0}, + {"label":"k07", "x":7, "y":0}, + {"label":"k08", "x":8, "y":0}, + {"label":"k09", "x":9, "y":0}, + {"label":"k0a", "x":10, "y":0}, + {"label":"k0b", "x":11, "y":0}, + {"label":"k0c", "x":12, "y":0}, + {"label":"k0d", "x":13, "y":0}, + {"label":"k0e", "x":14, "y":0}, + {"label":"k0f", "x":15.25, "y":0}, + {"label":"k0g", "x":16.25, "y":0}, + {"label":"k0h", "x":17.25, "y":0}, + + {"label":"k10", "x":0, "y":1, "w":1.5}, + {"label":"k12", "x":1.5, "y":1}, + {"label":"k13", "x":2.5, "y":1}, + {"label":"k14", "x":3.5, "y":1}, + {"label":"k15", "x":4.5, "y":1}, + {"label":"k16", "x":5.5, "y":1}, + {"label":"k17", "x":6.5, "y":1}, + {"label":"k18", "x":7.5, "y":1}, + {"label":"k19", "x":8.5, "y":1}, + {"label":"k1a", "x":9.5, "y":1}, + {"label":"k1b", "x":10.5, "y":1}, + {"label":"k1c", "x":11.5, "y":1}, + {"label":"k1d", "x":12.5, "y":1}, + {"label":"k1f", "x":15.25, "y":1}, + {"label":"k1g", "x":16.25, "y":1}, + {"label":"k1h", "x":17.25, "y":1}, + + {"label":"k20", "x":0, "y":2, "w":1.75}, + {"label":"k22", "x":1.75, "y":2}, + {"label":"k23", "x":2.75, "y":2}, + {"label":"k24", "x":3.75, "y":2}, + {"label":"k25", "x":4.75, "y":2}, + {"label":"k26", "x":5.75, "y":2}, + {"label":"k27", "x":6.75, "y":2}, + {"label":"k28", "x":7.75, "y":2}, + {"label":"k29", "x":8.75, "y":2}, + {"label":"k2a", "x":9.75, "y":2}, + {"label":"k2b", "x":10.75, "y":2}, + {"label":"k2c", "x":11.75, "y":2}, + {"label":"k1e", "x":12.75, "y":2}, + {"label":"k2d", "x":13.75, "y":1, "w":1.25, "h": 2}, + + {"label":"k30", "x":0, "y":3, "w":1.25}, + {"label":"k31", "x":1.25, "y":3}, + {"label":"k32", "x":2.25, "y":3}, + {"label":"k33", "x":3.25, "y":3}, + {"label":"k34", "x":4.25, "y":3}, + {"label":"k35", "x":5.25, "y":3}, + {"label":"k36", "x":6.25, "y":3}, + {"label":"k37", "x":7.25, "y":3}, + {"label":"k38", "x":8.25, "y":3}, + {"label":"k39", "x":9.25, "y":3}, + {"label":"k3a", "x":10.25, "y":3}, + {"label":"k3b", "x":11.25, "y":3}, + {"label":"k3d", "x":12.25, "y":3, "w":1.75}, + {"label":"k3e", "x":14, "y":3}, + {"label":"k3g", "x":16.25, "y":3}, + + {"label":"k40", "x":0, "y":4, "w":1.5}, + {"label":"k43", "x":2.5, "y":4, "w":1.5}, + {"label":"k44", "x":4, "y":4, "w":3}, + {"label":"k46", "x":7, "y":4}, + {"label":"k48", "x":8, "y":4, "w":3}, + {"label":"k4b", "x":11, "y":4, "w":1.5}, + {"label":"k4e", "x":13.5, "y":4, "w":1.5}, + {"label":"k4f", "x":15.25, "y":4}, + {"label":"k4g", "x":16.25, "y":4}, + {"label":"k4h", "x":17.25, "y":4} + ] + } + } +} diff --git a/keyboards/mokey/xox70/keymaps/default/keymap.c b/keyboards/mokey/xox70/keymaps/default/keymap.c new file mode 100644 index 0000000000..710acc04cb --- /dev/null +++ b/keyboards/mokey/xox70/keymaps/default/keymap.c @@ -0,0 +1,35 @@ +/* Copyright 2021 Ocean + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + LAYOUT( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INSERT, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DELETE, KC_END, KC_PGDOWN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_GRV, KC_MENU, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), + + LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; diff --git a/keyboards/mokey/xox70/keymaps/via/keymap.c b/keyboards/mokey/xox70/keymaps/via/keymap.c new file mode 100644 index 0000000000..61135189bf --- /dev/null +++ b/keyboards/mokey/xox70/keymaps/via/keymap.c @@ -0,0 +1,47 @@ +/* Copyright 2021 Ocean + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_all( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INSERT, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,KC_DELETE, KC_END, KC_PGDOWN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT,KC_UP, + KC_LCTL, KC_LGUI, KC_LALT,KC_SPC,KC_RALT, KC_GRV, KC_MENU, KC_RCTL,KC_LEFT, KC_DOWN, KC_RGHT), + + [1] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + + [3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) +}; diff --git a/keyboards/mokey/xox70/keymaps/via/rules.mk b/keyboards/mokey/xox70/keymaps/via/rules.mk new file mode 100644 index 0000000000..036bd6d1c3 --- /dev/null +++ b/keyboards/mokey/xox70/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes \ No newline at end of file diff --git a/keyboards/mokey/xox70/readme.md b/keyboards/mokey/xox70/readme.md new file mode 100644 index 0000000000..fa4d6838e2 --- /dev/null +++ b/keyboards/mokey/xox70/readme.md @@ -0,0 +1,20 @@ +# xox70 PCB + +![xox70](https://raw.githubusercontent.com/rhmokey/123.github.io/main/2021/08/15/hello-world/XOX70.jpg) + +Support Atmega32u4 keyboard,With a variety of configurations + +* Keyboard Maintainer: [Mokey](https://github.com/rhmokey) + +## Bootloader +* **Physical reset button**: Short press the button on the back of the PCB to enter the Bootloader and flash the firmware + +Make example for this keyboard (after setting up your build environment): + + make mokey/xox70:default + +Flashing example for this keyboard: + + make mokey/xox70:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/mokey/xox70/rules.mk b/keyboards/mokey/xox70/rules.mk new file mode 100644 index 0000000000..439452f177 --- /dev/null +++ b/keyboards/mokey/xox70/rules.mk @@ -0,0 +1,21 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/mokey/xox70/xox70.c b/keyboards/mokey/xox70/xox70.c new file mode 100644 index 0000000000..7c46b6a54a --- /dev/null +++ b/keyboards/mokey/xox70/xox70.c @@ -0,0 +1,15 @@ +/* Copyright 2021 Ocean + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "xox70.h" \ No newline at end of file diff --git a/keyboards/mokey/xox70/xox70.h b/keyboards/mokey/xox70/xox70.h new file mode 100644 index 0000000000..8c54e630c5 --- /dev/null +++ b/keyboards/mokey/xox70/xox70.h @@ -0,0 +1,65 @@ +/* Copyright 2021 Ocean + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" + +#define xxx KC_NO + +#define LAYOUT(\ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0e, k0f, k0g, k0h, \ + k10, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, k1h, \ + k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3g, \ + k40, k41, k43, k46, k4a, k4b, k4d, k4e, k4f, k4g, k4h \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, KC_NO, k0e, k0f, k0g, k0h }, \ + { k10, KC_NO, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1e, k1f, k1g, k1h }, \ + { k20, KC_NO, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k2d, KC_NO, KC_NO, KC_NO,KC_NO }, \ + { k30, KC_NO, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, KC_NO, k3d, KC_NO, KC_NO, k3g, KC_NO }, \ + { k40, k41, KC_NO, k43, KC_NO, KC_NO, k46, KC_NO, KC_NO, KC_NO, k4a, k4b, KC_NO, k4d, k4e, k4f, k4g, k4h } \ +} + +#define LAYOUT_division_backspace(\ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k0g, k0h, \ + k10, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1f, k1g, k1h, \ + k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k1e, k2d, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3e, k3g, \ + k40, k41, k43, k46, k4b, k4d, k4e, k4f, k4g, k4h \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k0g, k0h }, \ + { k10, KC_NO, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1f, k1g, k1h, KC_NO }, \ + { k20, KC_NO, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k1e, k2d, KC_NO, KC_NO, KC_NO }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, KC_NO, k3d, k3e, KC_NO, k3g, KC_NO }, \ + { k40, k41, KC_NO, k43, KC_NO, KC_NO, k46, KC_NO, KC_NO, KC_NO, KC_NO,k4b, KC_NO, k4d, k4e, k4f, k4g, k4h } \ +} + +#define LAYOUT_iso(\ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k0g, k0h, \ + k10, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1f, k1g, k1h, \ + k20, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k1e, k2d, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, k3d, k3e, k3g, \ + k40, k43, k44, k46, k48, k4b, k4e, k4f, k4g, k4h \ +) \ +{ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b, k0c, k0d, k0e, k0f, k0g, k0h }, \ + { k10, KC_NO, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, k1d, k1f, k1g, k1h, KC_NO }, \ + { k20, KC_NO, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, k2c, k1e, k2d, KC_NO, KC_NO, KC_NO }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, KC_NO, k3d, k3e, KC_NO, k3g, KC_NO }, \ + { k40, KC_NO, KC_NO, k43, k44, KC_NO, k46, KC_NO, k48, KC_NO, KC_NO, k4a, KC_NO, k4d, k4e, k4f, k4g, k4h } \ +} From 0107d77c249b2e8e7c55824c93e04d7051f0a806 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Fri, 19 Nov 2021 17:53:42 +0000 Subject: [PATCH 536/595] Handwired Split65: Fix QMK Configurator Implementation (#15209) --- keyboards/handwired/split65/info.json | 114 ++++++++++++-------------- 1 file changed, 53 insertions(+), 61 deletions(-) diff --git a/keyboards/handwired/split65/info.json b/keyboards/handwired/split65/info.json index 543fc9c394..34d9a21205 100644 --- a/keyboards/handwired/split65/info.json +++ b/keyboards/handwired/split65/info.json @@ -5,89 +5,81 @@ "layouts": { "LAYOUT": { "layout": [ - {"label":"\u00ac", "x":0, "y":0}, - {"label":"!", "x":1, "y":0}, - {"label":"\"", "x":2, "y":0}, - {"label":"\u00a3", "x":3, "y":0}, - {"label":"$", "x":4, "y":0}, - - {"label":"%", "x":5, "y":0}, - {"label":"^", "x":6, "y":0}, - {"label":"&", "x":7, "y":0}, - {"label":"*", "x":8, "y":0}, - {"label":"(", "x":9, "y":0}, - - {"label":")", "x":10, "y":0}, - {"label":"_", "x":11, "y":0}, - {"label":"+", "x":12, "y":0}, - {"label":"Backspace", "x":13, "y":0, "w":2}, - {"x":15, "y":0}, + {"label":"`\u00ac", "x":0, "y":0}, + {"label":"1!", "x":1, "y":0}, + {"label":"2\"", "x":2, "y":0}, + {"label":"3\u00a3", "x":3, "y":0}, + {"label":"4$", "x":4, "y":0}, + {"label":"5%", "x":5, "y":0}, + {"label":"6^", "x":6, "y":0}, + {"label":"7&", "x":8, "y":0}, + {"label":"8*", "x":9, "y":0}, + {"label":"9(", "x":10, "y":0}, + {"label":"0)", "x":11, "y":0}, + {"label":"-_", "x":12, "y":0}, + {"label":"=+", "x":13, "y":0}, + {"label":"Backspace", "x":14, "y":0, "w":2}, + {"label":"Insert", "x":16, "y":0}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, {"label":"W", "x":2.5, "y":1}, {"label":"E", "x":3.5, "y":1}, {"label":"R", "x":4.5, "y":1}, - {"label":"T", "x":5.5, "y":1}, - {"label":"Y", "x":6.5, "y":1}, - {"label":"U", "x":7.5, "y":1}, - {"label":"I", "x":8.5, "y":1}, - {"label":"O", "x":9.5, "y":1}, - - {"label":"P", "x":10.5, "y":1}, - {"label":"{", "x":11.5, "y":1}, - {"label":"}", "x":12.5, "y":1}, - {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, - {"x":15, "y":1}, + {"label":"Y", "x":7.5, "y":1}, + {"label":"U", "x":8.5, "y":1}, + {"label":"I", "x":9.5, "y":1}, + {"label":"O", "x":10.5, "y":1}, + {"label":"P", "x":11.5, "y":1}, + {"label":"[{", "x":12.5, "y":1}, + {"label":"]}", "x":13.5, "y":1}, + {"label":"Delete", "x":16, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, {"label":"A", "x":1.75, "y":2}, {"label":"S", "x":2.75, "y":2}, {"label":"D", "x":3.75, "y":2}, {"label":"F", "x":4.75, "y":2}, - {"label":"G", "x":5.75, "y":2}, - {"label":"H", "x":6.75, "y":2}, - {"label":"J", "x":7.75, "y":2}, - {"label":"K", "x":8.75, "y":2}, - {"label":"L", "x":9.75, "y":2}, + {"label":"H", "x":7.75, "y":2}, + {"label":"J", "x":8.75, "y":2}, + {"label":"K", "x":9.75, "y":2}, + {"label":"L", "x":10.75, "y":2}, + {"label":";:", "x":11.75, "y":2}, + {"label":"'@", "x":12.75, "y":2}, + {"label":"#~", "x":13.75, "y":2}, + {"label":"Enter", "x":14.75, "y":1, "w":1.25, "h":2}, + {"label":"Page Up", "x":16, "y":2}, - {"label":":", "x":10.75, "y":2}, - {"label":"@", "x":11.75, "y":2}, - {"label":"~", "x":12.75, "y":2}, - {"x":15, "y":2}, {"label":"Shift", "x":0, "y":3, "w":1.25}, - - {"label":"|", "x":1.25, "y":3}, + {"label":"\\|", "x":1.25, "y":3}, {"label":"Z", "x":2.25, "y":3}, {"label":"X", "x":3.25, "y":3}, {"label":"C", "x":4.25, "y":3}, {"label":"V", "x":5.25, "y":3}, - {"label":"B", "x":6.25, "y":3}, - {"label":"N", "x":7.25, "y":3}, - {"label":"M", "x":8.25, "y":3}, - {"label":"<", "x":9.25, "y":3}, - {"label":">", "x":10.25, "y":3}, - - {"label":"?", "x":11.25, "y":3}, - {"label":"Shift", "x":12.25, "y":3, "w":1.75}, - {"label":"UP", "x":14, "y":3}, - {"x":15, "y":3}, - {"label":"Ctrl", "x":0, "y":4, "w":1.25}, - - {"label":"Win", "x":1.25, "y":4, "w":1.25}, - {"label":"Alt", "x":2.5, "y":4, "w":1.25}, - {"x":3.75, "y":4, "w":3}, - {"x":6.75, "y":4, "w":3.25}, - {"label":"AltGr", "x":10, "y":4}, + {"label":"N", "x":8.25, "y":3}, + {"label":"M", "x":9.25, "y":3}, + {"label":",<", "x":10.25, "y":3}, + {"label":".>", "x":11.25, "y":3}, + {"label":"/?", "x":12.25, "y":3}, + {"label":"Shift", "x":13.25, "y":3, "w":1.75}, + {"label":"Up", "x":15, "y":3}, + {"label":"Page Down", "x":16, "y":3}, - {"label":"Win", "x":11, "y":4}, - {"label":"Menu", "x":12, "y":4}, - {"label":"LEFT", "x":13, "y":4}, - {"label":"DOWN", "x":14, "y":4}, - {"label":"RIGHT", "x":15, "y":4}] + {"label":"Ctrl", "x":0.25, "y":4, "w":1.25}, + {"label":"Win", "x":1.5, "y":4, "w":1.25}, + {"label":"Alt", "x":2.75, "y":4, "w":1.25}, + {"label":"Space", "x":4, "y":4, "w":2.75}, + {"label":"Enter", "x":8, "y":4, "w":2.25}, + {"label":"AltGr", "x":10.25, "y":4}, + {"label":"Lower", "x":11.25, "y":4}, + {"label":"Raise", "x":12.25, "y":4}, + {"label":"Left", "x":14, "y":4}, + {"label":"Down", "x":15, "y":4}, + {"label":"Right", "x":16, "y":4} + ] } } } From 2728603fe6d73e805a539d337fd01051c46ca806 Mon Sep 17 00:00:00 2001 From: Joel Challis <git@zvecr.com> Date: Fri, 19 Nov 2021 18:41:02 +0000 Subject: [PATCH 537/595] Move tmk_core/common/<plat> (#13918) --- build_keyboard.mk | 7 ++++--- build_test.mk | 6 +++--- common_features.mk | 4 +++- docs/feature_layers.md | 2 +- docs/fr-fr/faq_keymap.md | 2 +- docs/internals_gpio_control.md | 2 +- docs/ja/faq_keymap.md | 2 +- docs/ja/feature_layers.md | 2 +- docs/ja/pr_checklist.md | 2 +- docs/pr_checklist.md | 2 +- docs/zh-cn/faq_keymap.md | 2 +- keyboards/ai03/orbit/split_util.c | 2 +- .../cannonkeys/satisfaction75/satisfaction75.c | 2 +- .../satisfaction75/satisfaction_encoder.c | 2 +- keyboards/mxss/mxss.c | 2 +- keyboards/mxss/mxss_frontled.c | 2 +- keyboards/wilba_tech/wt_main.c | 2 +- keyboards/wilba_tech/wt_mono_backlight.c | 2 +- keyboards/wilba_tech/wt_rgb_backlight.c | 2 +- paths.mk | 3 +++ .../common => platforms}/arm_atsam/_timer.h | 0 {tmk_core/common => platforms}/arm_atsam/_wait.h | 0 .../common => platforms}/arm_atsam/atomic_util.h | 0 .../common => platforms}/arm_atsam/bootloader.c | 0 .../common => platforms}/arm_atsam/eeprom.c | 0 {tmk_core/common => platforms}/arm_atsam/gpio.h | 0 .../common => platforms}/arm_atsam/pin_defs.h | 0 .../common => platforms}/arm_atsam/platform.c | 0 .../arm_atsam/platform.mk | 0 .../arm_atsam/platform_deps.h | 0 .../common => platforms}/arm_atsam/suspend.c | 0 {tmk_core/common => platforms}/arm_atsam/timer.c | 0 {tmk_core/common => platforms}/atomic_util.h | 0 {tmk_core/common => platforms}/avr/_print.h | 0 {tmk_core/common => platforms}/avr/_timer.h | 0 {tmk_core/common => platforms}/avr/_wait.h | 0 {tmk_core/common => platforms}/avr/atomic_util.h | 0 {tmk_core/common => platforms}/avr/bootloader.c | 0 .../common => platforms}/avr/bootloader_size.c | 0 {tmk_core/common => platforms}/avr/gpio.h | 0 {tmk_core/common => platforms}/avr/pin_defs.h | 0 {tmk_core/common => platforms}/avr/platform.c | 0 tmk_core/avr.mk => platforms/avr/platform.mk | 2 +- .../common => platforms}/avr/platform_deps.h | 0 {tmk_core/common => platforms}/avr/printf.c | 0 {tmk_core/common => platforms}/avr/printf.mk | 0 {tmk_core/common => platforms}/avr/sleep_led.c | 0 {tmk_core/common => platforms}/avr/suspend.c | 0 {tmk_core/common => platforms}/avr/timer.c | 0 {tmk_core/common => platforms}/avr/timer_avr.h | 0 {tmk_core/common => platforms}/avr/xprintf.S | 0 {tmk_core/common => platforms}/avr/xprintf.h | 0 {tmk_core/common => platforms}/bootloader.h | 0 {tmk_core/common => platforms}/chibios/_timer.h | 0 {tmk_core/common => platforms}/chibios/_wait.c | 0 {tmk_core/common => platforms}/chibios/_wait.h | 0 .../common => platforms}/chibios/atomic_util.h | 0 .../common => platforms}/chibios/bootloader.c | 0 .../chibios/chibios_config.h | 0 .../common => platforms}/chibios/eeprom_stm32.c | 0 .../common => platforms}/chibios/eeprom_stm32.h | 0 .../chibios/eeprom_stm32_defs.h | 0 .../common => platforms}/chibios/eeprom_teensy.c | 0 .../common => platforms}/chibios/flash_stm32.c | 0 .../common => platforms}/chibios/flash_stm32.h | 0 .../chibios/gd32v_compatibility.h | 0 {tmk_core/common => platforms}/chibios/gpio.h | 0 .../common => platforms}/chibios/pin_defs.h | 0 .../common => platforms}/chibios/platform.c | 0 .../chibios.mk => platforms/chibios/platform.mk | 0 .../common => platforms}/chibios/platform_deps.h | 0 .../common => platforms}/chibios/sleep_led.c | 0 {tmk_core/common => platforms}/chibios/suspend.c | 0 .../chibios/syscall-fallbacks.c | 0 {tmk_core/common => platforms}/chibios/timer.c | 0 {tmk_core/common => platforms}/chibios/wait.c | 0 platforms/common.mk | 12 ++++++++++++ {tmk_core/common => platforms}/eeprom.h | 0 {tmk_core/common => platforms}/gpio.h | 0 {tmk_core/common => platforms}/pin_defs.h | 0 {tmk_core/common => platforms}/progmem.h | 0 {tmk_core/common => platforms}/sleep_led.h | 0 {tmk_core/common => platforms}/suspend.h | 0 {tmk_core/common => platforms}/test/_wait.h | 0 {tmk_core/common => platforms}/test/bootloader.c | 0 {tmk_core/common => platforms}/test/eeprom.c | 0 .../test/eeprom_stm32_tests.cpp | 0 .../common => platforms}/test/flash_stm32_mock.c | 0 {tmk_core/common => platforms}/test/hal.h | 0 {tmk_core/common => platforms}/test/platform.c | 0 {tmk_core/common => platforms}/test/platform.h | 0 tmk_core/native.mk => platforms/test/platform.mk | 0 .../common => platforms}/test/platform_deps.h | 0 {tmk_core/common => platforms}/test/rules.mk | 8 ++++---- {tmk_core/common => platforms}/test/suspend.c | 0 {tmk_core/common => platforms}/test/testlist.mk | 0 {tmk_core/common => platforms}/test/timer.c | 0 {tmk_core/common => platforms}/timer.h | 0 {tmk_core/common => platforms}/wait.h | 0 quantum/debounce/tests/rules.mk | 2 +- quantum/dynamic_keymap.c | 2 +- quantum/sequencer/tests/rules.mk | 2 +- quantum/via.c | 2 +- testlist.mk | 6 +++--- tmk_core/common.mk | 16 ---------------- tmk_core/protocol.mk | 2 -- tmk_core/rules.mk | 2 +- 107 files changed, 54 insertions(+), 54 deletions(-) rename {tmk_core/common => platforms}/arm_atsam/_timer.h (100%) rename {tmk_core/common => platforms}/arm_atsam/_wait.h (100%) rename {tmk_core/common => platforms}/arm_atsam/atomic_util.h (100%) rename {tmk_core/common => platforms}/arm_atsam/bootloader.c (100%) rename {tmk_core/common => platforms}/arm_atsam/eeprom.c (100%) rename {tmk_core/common => platforms}/arm_atsam/gpio.h (100%) rename {tmk_core/common => platforms}/arm_atsam/pin_defs.h (100%) rename {tmk_core/common => platforms}/arm_atsam/platform.c (100%) rename tmk_core/arm_atsam.mk => platforms/arm_atsam/platform.mk (100%) rename {tmk_core/common => platforms}/arm_atsam/platform_deps.h (100%) rename {tmk_core/common => platforms}/arm_atsam/suspend.c (100%) rename {tmk_core/common => platforms}/arm_atsam/timer.c (100%) rename {tmk_core/common => platforms}/atomic_util.h (100%) rename {tmk_core/common => platforms}/avr/_print.h (100%) rename {tmk_core/common => platforms}/avr/_timer.h (100%) rename {tmk_core/common => platforms}/avr/_wait.h (100%) rename {tmk_core/common => platforms}/avr/atomic_util.h (100%) rename {tmk_core/common => platforms}/avr/bootloader.c (100%) rename {tmk_core/common => platforms}/avr/bootloader_size.c (100%) rename {tmk_core/common => platforms}/avr/gpio.h (100%) rename {tmk_core/common => platforms}/avr/pin_defs.h (100%) rename {tmk_core/common => platforms}/avr/platform.c (100%) rename tmk_core/avr.mk => platforms/avr/platform.mk (97%) rename {tmk_core/common => platforms}/avr/platform_deps.h (100%) rename {tmk_core/common => platforms}/avr/printf.c (100%) rename {tmk_core/common => platforms}/avr/printf.mk (100%) rename {tmk_core/common => platforms}/avr/sleep_led.c (100%) rename {tmk_core/common => platforms}/avr/suspend.c (100%) rename {tmk_core/common => platforms}/avr/timer.c (100%) rename {tmk_core/common => platforms}/avr/timer_avr.h (100%) rename {tmk_core/common => platforms}/avr/xprintf.S (100%) rename {tmk_core/common => platforms}/avr/xprintf.h (100%) rename {tmk_core/common => platforms}/bootloader.h (100%) rename {tmk_core/common => platforms}/chibios/_timer.h (100%) rename {tmk_core/common => platforms}/chibios/_wait.c (100%) rename {tmk_core/common => platforms}/chibios/_wait.h (100%) rename {tmk_core/common => platforms}/chibios/atomic_util.h (100%) rename {tmk_core/common => platforms}/chibios/bootloader.c (100%) rename {tmk_core/common => platforms}/chibios/chibios_config.h (100%) rename {tmk_core/common => platforms}/chibios/eeprom_stm32.c (100%) rename {tmk_core/common => platforms}/chibios/eeprom_stm32.h (100%) rename {tmk_core/common => platforms}/chibios/eeprom_stm32_defs.h (100%) rename {tmk_core/common => platforms}/chibios/eeprom_teensy.c (100%) rename {tmk_core/common => platforms}/chibios/flash_stm32.c (100%) rename {tmk_core/common => platforms}/chibios/flash_stm32.h (100%) rename {tmk_core/common => platforms}/chibios/gd32v_compatibility.h (100%) rename {tmk_core/common => platforms}/chibios/gpio.h (100%) rename {tmk_core/common => platforms}/chibios/pin_defs.h (100%) rename {tmk_core/common => platforms}/chibios/platform.c (100%) rename tmk_core/chibios.mk => platforms/chibios/platform.mk (100%) rename {tmk_core/common => platforms}/chibios/platform_deps.h (100%) rename {tmk_core/common => platforms}/chibios/sleep_led.c (100%) rename {tmk_core/common => platforms}/chibios/suspend.c (100%) rename {tmk_core/common => platforms}/chibios/syscall-fallbacks.c (100%) rename {tmk_core/common => platforms}/chibios/timer.c (100%) rename {tmk_core/common => platforms}/chibios/wait.c (100%) create mode 100644 platforms/common.mk rename {tmk_core/common => platforms}/eeprom.h (100%) rename {tmk_core/common => platforms}/gpio.h (100%) rename {tmk_core/common => platforms}/pin_defs.h (100%) rename {tmk_core/common => platforms}/progmem.h (100%) rename {tmk_core/common => platforms}/sleep_led.h (100%) rename {tmk_core/common => platforms}/suspend.h (100%) rename {tmk_core/common => platforms}/test/_wait.h (100%) rename {tmk_core/common => platforms}/test/bootloader.c (100%) rename {tmk_core/common => platforms}/test/eeprom.c (100%) rename {tmk_core/common => platforms}/test/eeprom_stm32_tests.cpp (100%) rename {tmk_core/common => platforms}/test/flash_stm32_mock.c (100%) rename {tmk_core/common => platforms}/test/hal.h (100%) rename {tmk_core/common => platforms}/test/platform.c (100%) rename {tmk_core/common => platforms}/test/platform.h (100%) rename tmk_core/native.mk => platforms/test/platform.mk (100%) rename {tmk_core/common => platforms}/test/platform_deps.h (100%) rename {tmk_core/common => platforms}/test/rules.mk (78%) rename {tmk_core/common => platforms}/test/suspend.c (100%) rename {tmk_core/common => platforms}/test/testlist.mk (100%) rename {tmk_core/common => platforms}/test/timer.c (100%) rename {tmk_core/common => platforms}/timer.h (100%) rename {tmk_core/common => platforms}/wait.h (100%) delete mode 100644 tmk_core/common.mk diff --git a/build_keyboard.mk b/build_keyboard.mk index 36c628c7ce..c12aa0fce0 100644 --- a/build_keyboard.mk +++ b/build_keyboard.mk @@ -388,7 +388,7 @@ VPATH += $(COMMON_VPATH) include common_features.mk include $(BUILDDEFS_PATH)/generic_features.mk include $(TMK_PATH)/protocol.mk -include $(TMK_PATH)/common.mk +include $(PLATFORM_PATH)/common.mk include $(BUILDDEFS_PATH)/bootloader.mk SRC += $(patsubst %.c,%.clib,$(LIB_SRC)) @@ -404,13 +404,14 @@ ifneq ($(REQUIRE_PLATFORM_KEY),) endif endif -include $(TMK_PATH)/$(PLATFORM_KEY).mk +include $(PLATFORM_PATH)/$(PLATFORM_KEY)/platform.mk +-include $(PLATFORM_PATH)/$(PLATFORM_KEY)/flash.mk + ifneq ($(strip $(PROTOCOL)),) include $(TMK_PATH)/protocol/$(strip $(shell echo $(PROTOCOL) | tr '[:upper:]' '[:lower:]')).mk else include $(TMK_PATH)/protocol/$(PLATFORM_KEY).mk endif --include $(TOP_DIR)/platforms/$(PLATFORM_KEY)/flash.mk # TODO: remove this bodge? PROJECT_DEFS := $(OPT_DEFS) diff --git a/build_test.mk b/build_test.mk index 6e4494d77f..3553125a04 100644 --- a/build_test.mk +++ b/build_test.mk @@ -54,11 +54,11 @@ endif include common_features.mk include $(BUILDDEFS_PATH)/generic_features.mk -include $(TMK_PATH)/common.mk +include $(PLATFORM_PATH)/common.mk include $(TMK_PATH)/protocol.mk include $(QUANTUM_PATH)/debounce/tests/rules.mk include $(QUANTUM_PATH)/sequencer/tests/rules.mk -include $(TMK_PATH)/common/test/rules.mk +include $(PLATFORM_PATH)/test/rules.mk ifneq ($(filter $(FULL_TESTS),$(TEST)),) include build_full_test.mk endif @@ -73,7 +73,7 @@ $(TEST_OBJ)/$(TEST)_INC := $($(TEST)_INC) $(VPATH) $(GTEST_INC) $(TEST_OBJ)/$(TEST)_DEFS := $($(TEST)_DEFS) $(TEST_OBJ)/$(TEST)_CONFIG := $($(TEST)_CONFIG) -include $(TMK_PATH)/native.mk +include $(PLATFORM_PATH)/$(PLATFORM_KEY)/platform.mk include $(TMK_PATH)/rules.mk diff --git a/common_features.mk b/common_features.mk index 896fbb0129..8c593024f0 100644 --- a/common_features.mk +++ b/common_features.mk @@ -33,8 +33,10 @@ QUANTUM_SRC += \ VPATH += $(QUANTUM_DIR)/logging # Fall back to lib/printf if there is no platform provided print -ifeq ("$(wildcard $(TMK_PATH)/common/$(PLATFORM_KEY)/printf.mk)","") +ifeq ("$(wildcard $(PLATFORM_PATH)/$(PLATFORM_KEY)/printf.mk)","") include $(QUANTUM_PATH)/logging/print.mk +else + include $(PLATFORM_PATH)/$(PLATFORM_KEY)/printf.mk endif ifeq ($(strip $(DEBUG_MATRIX_SCAN_RATE_ENABLE)), yes) diff --git a/docs/feature_layers.md b/docs/feature_layers.md index 78d950dc49..e30c540a79 100644 --- a/docs/feature_layers.md +++ b/docs/feature_layers.md @@ -45,7 +45,7 @@ Once you have a good feel for how layers work and what you can do, you can get m Layers stack on top of each other in numerical order. When determining what a keypress does, QMK scans the layers from the top down, stopping when it reaches the first active layer that is not set to `KC_TRNS`. As a result if you activate a layer that is numerically lower than your current layer, and your current layer (or another layer that is active and higher than your target layer) has something other than `KC_TRNS`, that is the key that will be sent, not the key on the layer you just activated. This is the cause of most people's "why doesn't my layer get switched" problem. -Sometimes, you might want to switch between layers in a macro or as part of a tap dance routine. `layer_on` activates a layer, and `layer_off` deactivates it. More layer-related functions can be found in [action_layer.h](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/common/action_layer.h). +Sometimes, you might want to switch between layers in a macro or as part of a tap dance routine. `layer_on` activates a layer, and `layer_off` deactivates it. More layer-related functions can be found in [action_layer.h](https://github.com/qmk/qmk_firmware/blob/master/quantum/action_layer.h). ## Functions :id=functions diff --git a/docs/fr-fr/faq_keymap.md b/docs/fr-fr/faq_keymap.md index 374a005227..cc0700ab8e 100644 --- a/docs/fr-fr/faq_keymap.md +++ b/docs/fr-fr/faq_keymap.md @@ -6,7 +6,7 @@ Cette page couvre les questions souvent posées à propos des keymaps. Si vous n Regardez [Keycodes](keycodes.md) pour une liste des keycodes disponibles. Certains keycodes spécifiques ont des documentations plus complètes de disponible. -Les keycodes sont définies dans [common/keycode.h](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/common/keycode.h). +Les keycodes sont définies dans [common/keycode.h](https://github.com/qmk/qmk_firmware/blob/master/quantum/keycode.h). ## Quels sont les keycodes par défaut ? diff --git a/docs/internals_gpio_control.md b/docs/internals_gpio_control.md index 21a3bd661e..ccd3f8c74d 100644 --- a/docs/internals_gpio_control.md +++ b/docs/internals_gpio_control.md @@ -4,7 +4,7 @@ QMK has a GPIO control abstraction layer which is microcontroller agnostic. This ## Functions :id=functions -The following functions provide basic control of GPIOs and are found in `tmk_core/common/<platform>/gpio.h`. +The following functions provide basic control of GPIOs and are found in `platforms/<platform>/gpio.h`. |Function |Description | Old AVR Examples | Old ChibiOS/ARM Examples | |------------------------|--------------------------------------------------|-------------------------------------------------|-------------------------------------------------| diff --git a/docs/ja/faq_keymap.md b/docs/ja/faq_keymap.md index fb44e316b7..59c7d206a1 100644 --- a/docs/ja/faq_keymap.md +++ b/docs/ja/faq_keymap.md @@ -10,7 +10,7 @@ ## どのキーコードを使えますか？ あなたが利用可能なキーコードのインデックスについては、[キーコード](ja/keycodes.md)を見てください。より広範なドキュメントがある場合は、そこからリンクしてあります。 -キーコードは実際には [common/keycode.h](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/common/keycode.h) で定義されています。 +キーコードは実際には [common/keycode.h](https://github.com/qmk/qmk_firmware/blob/master/quantum/keycode.h) で定義されています。 ## デフォルトのキーコードとは何か？ diff --git a/docs/ja/feature_layers.md b/docs/ja/feature_layers.md index 011f0e0ef1..ca3e055835 100644 --- a/docs/ja/feature_layers.md +++ b/docs/ja/feature_layers.md @@ -50,7 +50,7 @@ QMK を使い始めたばかりの場合は、全てを単純にしたいでし レイヤーは番号順に上に積み重なっています。キーの押下の動作を決定する時に、QMK は上から順にレイヤーを走査し、`KC_TRNS` に設定されていない最初のアクティブなレイヤーに到達すると停止します。結果として、現在のレイヤーよりも数値的に低いレイヤーをアクティブにし、現在のレイヤー(あるいはアクティブでターゲットレイヤーよりも高い別のレイヤー)に `KC_TRNS` 以外のものがある場合、それが送信されるキーであり、アクティブ化したばかりのレイヤー上のキーではありません。これが、ほとんどの人の "なぜレイヤーが切り替わらないのか" 問題の原因です。 -場合によっては、マクロ内あるいはタップダンスルーチンの一部としてレイヤーを切り替えほうが良いかもしれません。`layer_on` はレイヤーをアクティブにし、`layer_off` はそれを非アクティブにします。もっと多くのレイヤーに関する関数は、[action_layer.h](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/common/action_layer.h) で見つけることができます。 +場合によっては、マクロ内あるいはタップダンスルーチンの一部としてレイヤーを切り替えほうが良いかもしれません。`layer_on` はレイヤーをアクティブにし、`layer_off` はそれを非アクティブにします。もっと多くのレイヤーに関する関数は、[action_layer.h](https://github.com/qmk/qmk_firmware/blob/master/quantum/action_layer.h) で見つけることができます。 ## 関数 :id=functions diff --git a/docs/ja/pr_checklist.md b/docs/ja/pr_checklist.md index 18dbeccebb..caab2b4d50 100644 --- a/docs/ja/pr_checklist.md +++ b/docs/ja/pr_checklist.md @@ -27,7 +27,7 @@ - 「旧式の」 GPIO/I2C/SPI 関数を使用しない - 正当な理由がない限り、QMK の抽象化を使用しなければなりません (怠惰は正当な理由にはなりません) - タイミングの抽象化にも従う必要があります: - `_delay_ms()` のかわりに `wait_ms()` を。(`#include <util/delay.h>` も消します) - - `timer_read()` と `timer_read32()` など。 -- タイミング API は [timer.h](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/common/timer.h) を参照してください + - `timer_read()` と `timer_read32()` など。 -- タイミング API は [timer.h](https://github.com/qmk/qmk_firmware/blob/master/platforms/timer.h) を参照してください - 新しい抽象化が有用だと思う場合は、次のことをお勧めします: - 機能が完成するまで自分のキーボードでプロトタイプを作成する - Discord の QMK コラボレータと話し合う diff --git a/docs/pr_checklist.md b/docs/pr_checklist.md index 94c62c6535..2a2b0f1e76 100644 --- a/docs/pr_checklist.md +++ b/docs/pr_checklist.md @@ -24,7 +24,7 @@ If there are any inconsistencies with these recommendations, you're best off [cr - no "old-school" or other low-level GPIO/I2C/SPI functions may be used -- must use QMK abstractions unless justifiable (and laziness is not valid justification) - timing abstractions should be followed too: - `wait_ms()` instead of `_delay_ms()` (remove `#include <util/delay.h>` too) - - `timer_read()` and `timer_read32()` etc. -- see [timer.h](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/common/timer.h) for the timing APIs + - `timer_read()` and `timer_read32()` etc. -- see [timer.h](https://github.com/qmk/qmk_firmware/blob/master/platforms/timer.h) for the timing APIs - if you think a new abstraction is useful, you're encouraged to: - prototype it in your own keyboard until it's feature-complete - discuss it with QMK Collaborators on Discord diff --git a/docs/zh-cn/faq_keymap.md b/docs/zh-cn/faq_keymap.md index fdfa25ad9e..ff38f38894 100644 --- a/docs/zh-cn/faq_keymap.md +++ b/docs/zh-cn/faq_keymap.md @@ -5,7 +5,7 @@ ## 我能用什么键码? 看[键码](keycodes.md)你可以找到你能用的键码索引。可以的话这些链接可以连接到更广泛的文档。 -键码实际上定义在[common/keycode.h](https://github.com/qmk/qmk_firmware/blob/master/tmk_core/common/keycode.h). +键码实际上定义在[common/keycode.h](https://github.com/qmk/qmk_firmware/blob/master/quantum/keycode.h). ## 默认的键码什么样? diff --git a/keyboards/ai03/orbit/split_util.c b/keyboards/ai03/orbit/split_util.c index a83ff5bc67..2352e5a111 100644 --- a/keyboards/ai03/orbit/split_util.c +++ b/keyboards/ai03/orbit/split_util.c @@ -8,7 +8,7 @@ #include "quantum.h" #ifdef EE_HANDS -# include "tmk_core/common/eeprom.h" +# include "eeprom.h" # include "eeconfig.h" #endif diff --git a/keyboards/cannonkeys/satisfaction75/satisfaction75.c b/keyboards/cannonkeys/satisfaction75/satisfaction75.c index 8b5016437c..bd7eaf1885 100644 --- a/keyboards/cannonkeys/satisfaction75/satisfaction75.c +++ b/keyboards/cannonkeys/satisfaction75/satisfaction75.c @@ -9,7 +9,7 @@ #include "raw_hid.h" #include "dynamic_keymap.h" -#include "tmk_core/common/eeprom.h" +#include "eeprom.h" #include "version.h" // for QMK_BUILDDATE used in EEPROM magic /* Artificial delay added to get media keys to work in the encoder*/ diff --git a/keyboards/cannonkeys/satisfaction75/satisfaction_encoder.c b/keyboards/cannonkeys/satisfaction75/satisfaction_encoder.c index cefdbc5f9c..0d2fdc359c 100644 --- a/keyboards/cannonkeys/satisfaction75/satisfaction_encoder.c +++ b/keyboards/cannonkeys/satisfaction75/satisfaction_encoder.c @@ -1,5 +1,5 @@ #include "satisfaction75.h" -#include "tmk_core/common/eeprom.h" +#include "eeprom.h" void pre_encoder_mode_change(){ if(encoder_mode == ENC_MODE_CLOCK_SET){ diff --git a/keyboards/mxss/mxss.c b/keyboards/mxss/mxss.c index f591d39e67..21beee232c 100644 --- a/keyboards/mxss/mxss.c +++ b/keyboards/mxss/mxss.c @@ -17,7 +17,7 @@ */ #include QMK_KEYBOARD_H -#include "tmk_core/common/eeprom.h" +#include "eeprom.h" #include "action_layer.h" #include "rgblight.h" #include "via.h" diff --git a/keyboards/mxss/mxss_frontled.c b/keyboards/mxss/mxss_frontled.c index 3c4309f070..f5e4613dfb 100644 --- a/keyboards/mxss/mxss_frontled.c +++ b/keyboards/mxss/mxss_frontled.c @@ -17,7 +17,7 @@ */ #include "mxss_frontled.h" -#include "tmk_core/common/eeprom.h" +#include "eeprom.h" #include "rgblight.h" #include "via.h" #include "version.h" // for QMK_BUILDDATE used in EEPROM magic diff --git a/keyboards/wilba_tech/wt_main.c b/keyboards/wilba_tech/wt_main.c index d5e136e06b..a8ad795446 100644 --- a/keyboards/wilba_tech/wt_main.c +++ b/keyboards/wilba_tech/wt_main.c @@ -27,7 +27,7 @@ #include "via.h" #ifndef VIA_ENABLE -#include "tmk_core/common/eeprom.h" +#include "eeprom.h" #include "version.h" // for QMK_BUILDDATE used in EEPROM magic #endif diff --git a/keyboards/wilba_tech/wt_mono_backlight.c b/keyboards/wilba_tech/wt_mono_backlight.c index 77cee34ca6..5e2fde810c 100644 --- a/keyboards/wilba_tech/wt_mono_backlight.c +++ b/keyboards/wilba_tech/wt_mono_backlight.c @@ -24,7 +24,7 @@ #include "progmem.h" #include "quantum/color.h" -#include "tmk_core/common/eeprom.h" +#include "eeprom.h" #include "via.h" // uses EEPROM address, lighting value IDs #define MONO_BACKLIGHT_CONFIG_EEPROM_ADDR (VIA_EEPROM_CUSTOM_CONFIG_ADDR) diff --git a/keyboards/wilba_tech/wt_rgb_backlight.c b/keyboards/wilba_tech/wt_rgb_backlight.c index 82b1fb2fb3..63763c6c90 100644 --- a/keyboards/wilba_tech/wt_rgb_backlight.c +++ b/keyboards/wilba_tech/wt_rgb_backlight.c @@ -68,7 +68,7 @@ LED_TYPE g_ws2812_leds[WS2812_LED_TOTAL]; #include "progmem.h" #include "quantum/color.h" -#include "tmk_core/common/eeprom.h" +#include "eeprom.h" #include "via.h" // uses EEPROM address, lighting value IDs #define RGB_BACKLIGHT_CONFIG_EEPROM_ADDR (VIA_EEPROM_CUSTOM_CONFIG_ADDR) diff --git a/paths.mk b/paths.mk index 7be1b2ce04..5a39d00ecd 100644 --- a/paths.mk +++ b/paths.mk @@ -13,6 +13,9 @@ DRIVER_PATH = $(DRIVER_DIR) PLATFORM_DIR = platforms PLATFORM_PATH = $(PLATFORM_DIR) +PROTOCOL_DIR = protocol +PROTOCOL_PATH = $(TMK_DIR)/$(PROTOCOL_DIR) + BUILDDEFS_DIR = builddefs BUILDDEFS_PATH = $(BUILDDEFS_DIR) diff --git a/tmk_core/common/arm_atsam/_timer.h b/platforms/arm_atsam/_timer.h similarity index 100% rename from tmk_core/common/arm_atsam/_timer.h rename to platforms/arm_atsam/_timer.h diff --git a/tmk_core/common/arm_atsam/_wait.h b/platforms/arm_atsam/_wait.h similarity index 100% rename from tmk_core/common/arm_atsam/_wait.h rename to platforms/arm_atsam/_wait.h diff --git a/tmk_core/common/arm_atsam/atomic_util.h b/platforms/arm_atsam/atomic_util.h similarity index 100% rename from tmk_core/common/arm_atsam/atomic_util.h rename to platforms/arm_atsam/atomic_util.h diff --git a/tmk_core/common/arm_atsam/bootloader.c b/platforms/arm_atsam/bootloader.c similarity index 100% rename from tmk_core/common/arm_atsam/bootloader.c rename to platforms/arm_atsam/bootloader.c diff --git a/tmk_core/common/arm_atsam/eeprom.c b/platforms/arm_atsam/eeprom.c similarity index 100% rename from tmk_core/common/arm_atsam/eeprom.c rename to platforms/arm_atsam/eeprom.c diff --git a/tmk_core/common/arm_atsam/gpio.h b/platforms/arm_atsam/gpio.h similarity index 100% rename from tmk_core/common/arm_atsam/gpio.h rename to platforms/arm_atsam/gpio.h diff --git a/tmk_core/common/arm_atsam/pin_defs.h b/platforms/arm_atsam/pin_defs.h similarity index 100% rename from tmk_core/common/arm_atsam/pin_defs.h rename to platforms/arm_atsam/pin_defs.h diff --git a/tmk_core/common/arm_atsam/platform.c b/platforms/arm_atsam/platform.c similarity index 100% rename from tmk_core/common/arm_atsam/platform.c rename to platforms/arm_atsam/platform.c diff --git a/tmk_core/arm_atsam.mk b/platforms/arm_atsam/platform.mk similarity index 100% rename from tmk_core/arm_atsam.mk rename to platforms/arm_atsam/platform.mk diff --git a/tmk_core/common/arm_atsam/platform_deps.h b/platforms/arm_atsam/platform_deps.h similarity index 100% rename from tmk_core/common/arm_atsam/platform_deps.h rename to platforms/arm_atsam/platform_deps.h diff --git a/tmk_core/common/arm_atsam/suspend.c b/platforms/arm_atsam/suspend.c similarity index 100% rename from tmk_core/common/arm_atsam/suspend.c rename to platforms/arm_atsam/suspend.c diff --git a/tmk_core/common/arm_atsam/timer.c b/platforms/arm_atsam/timer.c similarity index 100% rename from tmk_core/common/arm_atsam/timer.c rename to platforms/arm_atsam/timer.c diff --git a/tmk_core/common/atomic_util.h b/platforms/atomic_util.h similarity index 100% rename from tmk_core/common/atomic_util.h rename to platforms/atomic_util.h diff --git a/tmk_core/common/avr/_print.h b/platforms/avr/_print.h similarity index 100% rename from tmk_core/common/avr/_print.h rename to platforms/avr/_print.h diff --git a/tmk_core/common/avr/_timer.h b/platforms/avr/_timer.h similarity index 100% rename from tmk_core/common/avr/_timer.h rename to platforms/avr/_timer.h diff --git a/tmk_core/common/avr/_wait.h b/platforms/avr/_wait.h similarity index 100% rename from tmk_core/common/avr/_wait.h rename to platforms/avr/_wait.h diff --git a/tmk_core/common/avr/atomic_util.h b/platforms/avr/atomic_util.h similarity index 100% rename from tmk_core/common/avr/atomic_util.h rename to platforms/avr/atomic_util.h diff --git a/tmk_core/common/avr/bootloader.c b/platforms/avr/bootloader.c similarity index 100% rename from tmk_core/common/avr/bootloader.c rename to platforms/avr/bootloader.c diff --git a/tmk_core/common/avr/bootloader_size.c b/platforms/avr/bootloader_size.c similarity index 100% rename from tmk_core/common/avr/bootloader_size.c rename to platforms/avr/bootloader_size.c diff --git a/tmk_core/common/avr/gpio.h b/platforms/avr/gpio.h similarity index 100% rename from tmk_core/common/avr/gpio.h rename to platforms/avr/gpio.h diff --git a/tmk_core/common/avr/pin_defs.h b/platforms/avr/pin_defs.h similarity index 100% rename from tmk_core/common/avr/pin_defs.h rename to platforms/avr/pin_defs.h diff --git a/tmk_core/common/avr/platform.c b/platforms/avr/platform.c similarity index 100% rename from tmk_core/common/avr/platform.c rename to platforms/avr/platform.c diff --git a/tmk_core/avr.mk b/platforms/avr/platform.mk similarity index 97% rename from tmk_core/avr.mk rename to platforms/avr/platform.mk index c52262273e..b45108736f 100644 --- a/tmk_core/avr.mk +++ b/platforms/avr/platform.mk @@ -163,7 +163,7 @@ ifeq ($(strip $(QMK_BOOTLOADER_TYPE)),) else make -C lib/lufa/Bootloaders/$(QMK_BOOTLOADER_TYPE)/ clean $(QMK_BIN) generate-dfu-header --quiet --keyboard $(KEYBOARD) --output lib/lufa/Bootloaders/$(QMK_BOOTLOADER_TYPE)/Keyboard.h - $(eval MAX_SIZE=$(shell n=`$(CC) -E -mmcu=$(MCU) -D__ASSEMBLER__ $(CFLAGS) $(OPT_DEFS) tmk_core/common/avr/bootloader_size.c 2> /dev/null | sed -ne 's/\r//;/^#/n;/^AVR_SIZE:/,$${s/^AVR_SIZE: //;p;}'` && echo $$(($$n)) || echo 0)) + $(eval MAX_SIZE=$(shell n=`$(CC) -E -mmcu=$(MCU) -D__ASSEMBLER__ $(CFLAGS) $(OPT_DEFS) platforms/avr/bootloader_size.c 2> /dev/null | sed -ne 's/\r//;/^#/n;/^AVR_SIZE:/,$${s/^AVR_SIZE: //;p;}'` && echo $$(($$n)) || echo 0)) $(eval PROGRAM_SIZE_KB=$(shell n=`expr $(MAX_SIZE) / 1024` && echo $$(($$n)) || echo 0)) $(eval BOOT_SECTION_SIZE_KB=$(shell n=`expr $(BOOTLOADER_SIZE) / 1024` && echo $$(($$n)) || echo 0)) $(eval FLASH_SIZE_KB=$(shell n=`expr $(PROGRAM_SIZE_KB) + $(BOOT_SECTION_SIZE_KB)` && echo $$(($$n)) || echo 0)) diff --git a/tmk_core/common/avr/platform_deps.h b/platforms/avr/platform_deps.h similarity index 100% rename from tmk_core/common/avr/platform_deps.h rename to platforms/avr/platform_deps.h diff --git a/tmk_core/common/avr/printf.c b/platforms/avr/printf.c similarity index 100% rename from tmk_core/common/avr/printf.c rename to platforms/avr/printf.c diff --git a/tmk_core/common/avr/printf.mk b/platforms/avr/printf.mk similarity index 100% rename from tmk_core/common/avr/printf.mk rename to platforms/avr/printf.mk diff --git a/tmk_core/common/avr/sleep_led.c b/platforms/avr/sleep_led.c similarity index 100% rename from tmk_core/common/avr/sleep_led.c rename to platforms/avr/sleep_led.c diff --git a/tmk_core/common/avr/suspend.c b/platforms/avr/suspend.c similarity index 100% rename from tmk_core/common/avr/suspend.c rename to platforms/avr/suspend.c diff --git a/tmk_core/common/avr/timer.c b/platforms/avr/timer.c similarity index 100% rename from tmk_core/common/avr/timer.c rename to platforms/avr/timer.c diff --git a/tmk_core/common/avr/timer_avr.h b/platforms/avr/timer_avr.h similarity index 100% rename from tmk_core/common/avr/timer_avr.h rename to platforms/avr/timer_avr.h diff --git a/tmk_core/common/avr/xprintf.S b/platforms/avr/xprintf.S similarity index 100% rename from tmk_core/common/avr/xprintf.S rename to platforms/avr/xprintf.S diff --git a/tmk_core/common/avr/xprintf.h b/platforms/avr/xprintf.h similarity index 100% rename from tmk_core/common/avr/xprintf.h rename to platforms/avr/xprintf.h diff --git a/tmk_core/common/bootloader.h b/platforms/bootloader.h similarity index 100% rename from tmk_core/common/bootloader.h rename to platforms/bootloader.h diff --git a/tmk_core/common/chibios/_timer.h b/platforms/chibios/_timer.h similarity index 100% rename from tmk_core/common/chibios/_timer.h rename to platforms/chibios/_timer.h diff --git a/tmk_core/common/chibios/_wait.c b/platforms/chibios/_wait.c similarity index 100% rename from tmk_core/common/chibios/_wait.c rename to platforms/chibios/_wait.c diff --git a/tmk_core/common/chibios/_wait.h b/platforms/chibios/_wait.h similarity index 100% rename from tmk_core/common/chibios/_wait.h rename to platforms/chibios/_wait.h diff --git a/tmk_core/common/chibios/atomic_util.h b/platforms/chibios/atomic_util.h similarity index 100% rename from tmk_core/common/chibios/atomic_util.h rename to platforms/chibios/atomic_util.h diff --git a/tmk_core/common/chibios/bootloader.c b/platforms/chibios/bootloader.c similarity index 100% rename from tmk_core/common/chibios/bootloader.c rename to platforms/chibios/bootloader.c diff --git a/tmk_core/common/chibios/chibios_config.h b/platforms/chibios/chibios_config.h similarity index 100% rename from tmk_core/common/chibios/chibios_config.h rename to platforms/chibios/chibios_config.h diff --git a/tmk_core/common/chibios/eeprom_stm32.c b/platforms/chibios/eeprom_stm32.c similarity index 100% rename from tmk_core/common/chibios/eeprom_stm32.c rename to platforms/chibios/eeprom_stm32.c diff --git a/tmk_core/common/chibios/eeprom_stm32.h b/platforms/chibios/eeprom_stm32.h similarity index 100% rename from tmk_core/common/chibios/eeprom_stm32.h rename to platforms/chibios/eeprom_stm32.h diff --git a/tmk_core/common/chibios/eeprom_stm32_defs.h b/platforms/chibios/eeprom_stm32_defs.h similarity index 100% rename from tmk_core/common/chibios/eeprom_stm32_defs.h rename to platforms/chibios/eeprom_stm32_defs.h diff --git a/tmk_core/common/chibios/eeprom_teensy.c b/platforms/chibios/eeprom_teensy.c similarity index 100% rename from tmk_core/common/chibios/eeprom_teensy.c rename to platforms/chibios/eeprom_teensy.c diff --git a/tmk_core/common/chibios/flash_stm32.c b/platforms/chibios/flash_stm32.c similarity index 100% rename from tmk_core/common/chibios/flash_stm32.c rename to platforms/chibios/flash_stm32.c diff --git a/tmk_core/common/chibios/flash_stm32.h b/platforms/chibios/flash_stm32.h similarity index 100% rename from tmk_core/common/chibios/flash_stm32.h rename to platforms/chibios/flash_stm32.h diff --git a/tmk_core/common/chibios/gd32v_compatibility.h b/platforms/chibios/gd32v_compatibility.h similarity index 100% rename from tmk_core/common/chibios/gd32v_compatibility.h rename to platforms/chibios/gd32v_compatibility.h diff --git a/tmk_core/common/chibios/gpio.h b/platforms/chibios/gpio.h similarity index 100% rename from tmk_core/common/chibios/gpio.h rename to platforms/chibios/gpio.h diff --git a/tmk_core/common/chibios/pin_defs.h b/platforms/chibios/pin_defs.h similarity index 100% rename from tmk_core/common/chibios/pin_defs.h rename to platforms/chibios/pin_defs.h diff --git a/tmk_core/common/chibios/platform.c b/platforms/chibios/platform.c similarity index 100% rename from tmk_core/common/chibios/platform.c rename to platforms/chibios/platform.c diff --git a/tmk_core/chibios.mk b/platforms/chibios/platform.mk similarity index 100% rename from tmk_core/chibios.mk rename to platforms/chibios/platform.mk diff --git a/tmk_core/common/chibios/platform_deps.h b/platforms/chibios/platform_deps.h similarity index 100% rename from tmk_core/common/chibios/platform_deps.h rename to platforms/chibios/platform_deps.h diff --git a/tmk_core/common/chibios/sleep_led.c b/platforms/chibios/sleep_led.c similarity index 100% rename from tmk_core/common/chibios/sleep_led.c rename to platforms/chibios/sleep_led.c diff --git a/tmk_core/common/chibios/suspend.c b/platforms/chibios/suspend.c similarity index 100% rename from tmk_core/common/chibios/suspend.c rename to platforms/chibios/suspend.c diff --git a/tmk_core/common/chibios/syscall-fallbacks.c b/platforms/chibios/syscall-fallbacks.c similarity index 100% rename from tmk_core/common/chibios/syscall-fallbacks.c rename to platforms/chibios/syscall-fallbacks.c diff --git a/tmk_core/common/chibios/timer.c b/platforms/chibios/timer.c similarity index 100% rename from tmk_core/common/chibios/timer.c rename to platforms/chibios/timer.c diff --git a/tmk_core/common/chibios/wait.c b/platforms/chibios/wait.c similarity index 100% rename from tmk_core/common/chibios/wait.c rename to platforms/chibios/wait.c diff --git a/platforms/common.mk b/platforms/common.mk new file mode 100644 index 0000000000..f7a0fc7028 --- /dev/null +++ b/platforms/common.mk @@ -0,0 +1,12 @@ +PLATFORM_COMMON_DIR = $(PLATFORM_PATH)/$(PLATFORM_KEY) + +TMK_COMMON_SRC += \ + $(PLATFORM_COMMON_DIR)/platform.c \ + $(PLATFORM_COMMON_DIR)/suspend.c \ + $(PLATFORM_COMMON_DIR)/timer.c \ + $(PLATFORM_COMMON_DIR)/bootloader.c \ + +# Search Path +VPATH += $(PLATFORM_PATH) +VPATH += $(PLATFORM_PATH)/$(PLATFORM_KEY) +VPATH += $(PLATFORM_PATH)/$(PLATFORM_KEY)/$(DRIVER_DIR) diff --git a/tmk_core/common/eeprom.h b/platforms/eeprom.h similarity index 100% rename from tmk_core/common/eeprom.h rename to platforms/eeprom.h diff --git a/tmk_core/common/gpio.h b/platforms/gpio.h similarity index 100% rename from tmk_core/common/gpio.h rename to platforms/gpio.h diff --git a/tmk_core/common/pin_defs.h b/platforms/pin_defs.h similarity index 100% rename from tmk_core/common/pin_defs.h rename to platforms/pin_defs.h diff --git a/tmk_core/common/progmem.h b/platforms/progmem.h similarity index 100% rename from tmk_core/common/progmem.h rename to platforms/progmem.h diff --git a/tmk_core/common/sleep_led.h b/platforms/sleep_led.h similarity index 100% rename from tmk_core/common/sleep_led.h rename to platforms/sleep_led.h diff --git a/tmk_core/common/suspend.h b/platforms/suspend.h similarity index 100% rename from tmk_core/common/suspend.h rename to platforms/suspend.h diff --git a/tmk_core/common/test/_wait.h b/platforms/test/_wait.h similarity index 100% rename from tmk_core/common/test/_wait.h rename to platforms/test/_wait.h diff --git a/tmk_core/common/test/bootloader.c b/platforms/test/bootloader.c similarity index 100% rename from tmk_core/common/test/bootloader.c rename to platforms/test/bootloader.c diff --git a/tmk_core/common/test/eeprom.c b/platforms/test/eeprom.c similarity index 100% rename from tmk_core/common/test/eeprom.c rename to platforms/test/eeprom.c diff --git a/tmk_core/common/test/eeprom_stm32_tests.cpp b/platforms/test/eeprom_stm32_tests.cpp similarity index 100% rename from tmk_core/common/test/eeprom_stm32_tests.cpp rename to platforms/test/eeprom_stm32_tests.cpp diff --git a/tmk_core/common/test/flash_stm32_mock.c b/platforms/test/flash_stm32_mock.c similarity index 100% rename from tmk_core/common/test/flash_stm32_mock.c rename to platforms/test/flash_stm32_mock.c diff --git a/tmk_core/common/test/hal.h b/platforms/test/hal.h similarity index 100% rename from tmk_core/common/test/hal.h rename to platforms/test/hal.h diff --git a/tmk_core/common/test/platform.c b/platforms/test/platform.c similarity index 100% rename from tmk_core/common/test/platform.c rename to platforms/test/platform.c diff --git a/tmk_core/common/test/platform.h b/platforms/test/platform.h similarity index 100% rename from tmk_core/common/test/platform.h rename to platforms/test/platform.h diff --git a/tmk_core/native.mk b/platforms/test/platform.mk similarity index 100% rename from tmk_core/native.mk rename to platforms/test/platform.mk diff --git a/tmk_core/common/test/platform_deps.h b/platforms/test/platform_deps.h similarity index 100% rename from tmk_core/common/test/platform_deps.h rename to platforms/test/platform_deps.h diff --git a/tmk_core/common/test/rules.mk b/platforms/test/rules.mk similarity index 78% rename from tmk_core/common/test/rules.mk rename to platforms/test/rules.mk index 73d2302da7..66b853d8ee 100644 --- a/tmk_core/common/test/rules.mk +++ b/platforms/test/rules.mk @@ -11,14 +11,14 @@ eeprom_stm32_large_DEFS := $(eeprom_stm32_DEFS) \ -DFEE_PAGE_COUNT=16 eeprom_stm32_INC := \ - $(TMK_PATH)/common/chibios/ + $(PLATFORM_PATH)/chibios/ eeprom_stm32_tiny_INC := $(eeprom_stm32_INC) eeprom_stm32_large_INC := $(eeprom_stm32_INC) eeprom_stm32_SRC := \ $(TOP_DIR)/drivers/eeprom/eeprom_driver.c \ - $(TMK_PATH)/common/test/eeprom_stm32_tests.cpp \ - $(TMK_PATH)/common/test/flash_stm32_mock.c \ - $(TMK_PATH)/common/chibios/eeprom_stm32.c + $(PLATFORM_PATH)/$(PLATFORM_KEY)/eeprom_stm32_tests.cpp \ + $(PLATFORM_PATH)/$(PLATFORM_KEY)/flash_stm32_mock.c \ + $(PLATFORM_PATH)/chibios/eeprom_stm32.c eeprom_stm32_tiny_SRC := $(eeprom_stm32_SRC) eeprom_stm32_large_SRC := $(eeprom_stm32_SRC) diff --git a/tmk_core/common/test/suspend.c b/platforms/test/suspend.c similarity index 100% rename from tmk_core/common/test/suspend.c rename to platforms/test/suspend.c diff --git a/tmk_core/common/test/testlist.mk b/platforms/test/testlist.mk similarity index 100% rename from tmk_core/common/test/testlist.mk rename to platforms/test/testlist.mk diff --git a/tmk_core/common/test/timer.c b/platforms/test/timer.c similarity index 100% rename from tmk_core/common/test/timer.c rename to platforms/test/timer.c diff --git a/tmk_core/common/timer.h b/platforms/timer.h similarity index 100% rename from tmk_core/common/timer.h rename to platforms/timer.h diff --git a/tmk_core/common/wait.h b/platforms/wait.h similarity index 100% rename from tmk_core/common/wait.h rename to platforms/wait.h diff --git a/quantum/debounce/tests/rules.mk b/quantum/debounce/tests/rules.mk index 66928d7eb6..e908dd6f67 100644 --- a/quantum/debounce/tests/rules.mk +++ b/quantum/debounce/tests/rules.mk @@ -16,7 +16,7 @@ DEBOUNCE_COMMON_DEFS := -DMATRIX_ROWS=4 -DMATRIX_COLS=10 -DDEBOUNCE=5 DEBOUNCE_COMMON_SRC := $(QUANTUM_PATH)/debounce/tests/debounce_test_common.cpp \ - $(TMK_PATH)/common/test/timer.c + $(PLATFORM_PATH)/$(PLATFORM_KEY)/timer.c debounce_sym_defer_g_DEFS := $(DEBOUNCE_COMMON_DEFS) debounce_sym_defer_g_SRC := $(DEBOUNCE_COMMON_SRC) \ diff --git a/quantum/dynamic_keymap.c b/quantum/dynamic_keymap.c index b7a9f2662c..f5525576d8 100644 --- a/quantum/dynamic_keymap.c +++ b/quantum/dynamic_keymap.c @@ -16,7 +16,7 @@ #include "config.h" #include "keymap.h" // to get keymaps[][][] -#include "tmk_core/common/eeprom.h" +#include "eeprom.h" #include "progmem.h" // to read default from flash #include "quantum.h" // for send_string() #include "dynamic_keymap.h" diff --git a/quantum/sequencer/tests/rules.mk b/quantum/sequencer/tests/rules.mk index 87a204669c..a3bbd80513 100644 --- a/quantum/sequencer/tests/rules.mk +++ b/quantum/sequencer/tests/rules.mk @@ -8,4 +8,4 @@ sequencer_SRC := \ $(QUANTUM_PATH)/sequencer/tests/midi_mock.c \ $(QUANTUM_PATH)/sequencer/tests/sequencer_tests.cpp \ $(QUANTUM_PATH)/sequencer/sequencer.c \ - $(TMK_PATH)/common/test/timer.c + $(PLATFORM_PATH)/$(PLATFORM_KEY)/timer.c diff --git a/quantum/via.c b/quantum/via.c index 1b2dbcf08d..7c8aa753e7 100644 --- a/quantum/via.c +++ b/quantum/via.c @@ -44,7 +44,7 @@ #include "raw_hid.h" #include "dynamic_keymap.h" -#include "tmk_core/common/eeprom.h" +#include "eeprom.h" #include "version.h" // for QMK_BUILDDATE used in EEPROM magic #include "via_ensure_keycode.h" diff --git a/testlist.mk b/testlist.mk index 364fb339c6..faff4d201c 100644 --- a/testlist.mk +++ b/testlist.mk @@ -1,9 +1,9 @@ TEST_LIST = $(notdir $(patsubst %/rules.mk,%,$(wildcard $(ROOT_DIR)/tests/*/rules.mk))) FULL_TESTS := $(TEST_LIST) -include $(ROOT_DIR)/quantum/debounce/tests/testlist.mk -include $(ROOT_DIR)/quantum/sequencer/tests/testlist.mk -include $(ROOT_DIR)/tmk_core/common/test/testlist.mk +include $(QUANTUM_PATH)/debounce/tests/testlist.mk +include $(QUANTUM_PATH)/sequencer/tests/testlist.mk +include $(PLATFORM_PATH)/test/testlist.mk define VALIDATE_TEST_LIST ifneq ($1,) diff --git a/tmk_core/common.mk b/tmk_core/common.mk deleted file mode 100644 index 555b942c9d..0000000000 --- a/tmk_core/common.mk +++ /dev/null @@ -1,16 +0,0 @@ -COMMON_DIR = common -PLATFORM_COMMON_DIR = $(COMMON_DIR)/$(PLATFORM_KEY) - -TMK_COMMON_SRC += \ - $(PLATFORM_COMMON_DIR)/platform.c \ - $(PLATFORM_COMMON_DIR)/suspend.c \ - $(PLATFORM_COMMON_DIR)/timer.c \ - $(PLATFORM_COMMON_DIR)/bootloader.c \ - -# Use platform provided print if it exists --include $(TMK_PATH)/$(PLATFORM_COMMON_DIR)/printf.mk - -# Search Path -VPATH += $(TMK_PATH)/$(COMMON_DIR) -VPATH += $(TMK_PATH)/$(PLATFORM_COMMON_DIR) -VPATH += $(PLATFORM_PATH)/$(PLATFORM_KEY)/$(DRIVER_DIR) diff --git a/tmk_core/protocol.mk b/tmk_core/protocol.mk index a8723e6b2e..31a6de76f1 100644 --- a/tmk_core/protocol.mk +++ b/tmk_core/protocol.mk @@ -1,5 +1,3 @@ -PROTOCOL_DIR = protocol - TMK_COMMON_SRC += \ $(PROTOCOL_DIR)/host.c \ $(PROTOCOL_DIR)/report.c \ diff --git a/tmk_core/rules.mk b/tmk_core/rules.mk index e657af3f43..6767a8e4af 100644 --- a/tmk_core/rules.mk +++ b/tmk_core/rules.mk @@ -479,7 +479,7 @@ ifeq ($(findstring avr-gcc,$(CC)),avr-gcc) SIZE_MARGIN = 1024 check-size: - $(eval MAX_SIZE=$(shell n=`$(CC) -E -mmcu=$(MCU) -D__ASSEMBLER__ $(CFLAGS) $(OPT_DEFS) tmk_core/common/avr/bootloader_size.c 2> /dev/null | sed -ne 's/\r//;/^#/n;/^AVR_SIZE:/,$${s/^AVR_SIZE: //;p;}'` && echo $$(($$n)) || echo 0)) + $(eval MAX_SIZE=$(shell n=`$(CC) -E -mmcu=$(MCU) -D__ASSEMBLER__ $(CFLAGS) $(OPT_DEFS) platforms/avr/bootloader_size.c 2> /dev/null | sed -ne 's/\r//;/^#/n;/^AVR_SIZE:/,$${s/^AVR_SIZE: //;p;}'` && echo $$(($$n)) || echo 0)) $(eval CURRENT_SIZE=$(shell if [ -f $(BUILD_DIR)/$(TARGET).hex ]; then $(SIZE) --target=$(FORMAT) $(BUILD_DIR)/$(TARGET).hex | $(AWK) 'NR==2 {print $$4}'; else printf 0; fi)) $(eval FREE_SIZE=$(shell expr $(MAX_SIZE) - $(CURRENT_SIZE))) $(eval OVER_SIZE=$(shell expr $(CURRENT_SIZE) - $(MAX_SIZE))) From ac00b6da293d0318505e80df7069d1e3e4925547 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre <drashna@live.com> Date: Fri, 19 Nov 2021 13:22:45 -0800 Subject: [PATCH 538/595] [Bug] Fix timer include in override_wiring.c (#15221) * [Bug] Fix timer include in override_wiring.c * add platforms to keep parity with old method --- tmk_core/protocol/usb_hid/override_wiring.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tmk_core/protocol/usb_hid/override_wiring.c b/tmk_core/protocol/usb_hid/override_wiring.c index 52f03c300f..adc6645f8e 100644 --- a/tmk_core/protocol/usb_hid/override_wiring.c +++ b/tmk_core/protocol/usb_hid/override_wiring.c @@ -3,7 +3,7 @@ */ #define __DELAY_BACKWARD_COMPATIBLE__ #include <util/delay.h> -#include "common/timer.h" +#include "platforms/timer.h" unsigned long millis(void) From 8cefe141f8f9a9cfebc15f87fab9f19c2675e181 Mon Sep 17 00:00:00 2001 From: Nick Brassel <nick@tzarc.org> Date: Sat, 20 Nov 2021 09:04:11 +1100 Subject: [PATCH 539/595] CI: Create GitHub Actions unit test workflow (#15223) * Create GitHub Actions unit test workflow * Create GitHub Actions unit test workflow - checkout submodules * Create GitHub Actions unit test workflow - update job name * Develop branch. * Update .github/workflows/unit_test.yml Co-authored-by: Joel Challis <git@zvecr.com> * Update .github/workflows/unit_test.yml Co-authored-by: Joel Challis <git@zvecr.com> * builddefs Co-authored-by: zvecr <git@zvecr.com> --- .github/workflows/cli.yml | 2 +- .github/workflows/unit_test.yml | 30 ++++++++++++++++++++++++++++++ 2 files changed, 31 insertions(+), 1 deletion(-) create mode 100644 .github/workflows/unit_test.yml diff --git a/.github/workflows/cli.yml b/.github/workflows/cli.yml index 3bf9741ac7..2ea810958b 100644 --- a/.github/workflows/cli.yml +++ b/.github/workflows/cli.yml @@ -4,7 +4,7 @@ on: push: branches: - master - - future + - develop pull_request: paths: - 'lib/python/**' diff --git a/.github/workflows/unit_test.yml b/.github/workflows/unit_test.yml new file mode 100644 index 0000000000..26bcb2f511 --- /dev/null +++ b/.github/workflows/unit_test.yml @@ -0,0 +1,30 @@ +name: Unit Tests + +on: + push: + branches: + - master + - develop + pull_request: + paths: + - 'builddefs/**' + - 'quantum/**' + - 'platforms/**' + - 'tmk_core/**' + - 'tests/**' + - '*.mk' + - 'Makefile' + - '.github/workflows/unit_test.yml' + +jobs: + test: + runs-on: ubuntu-latest + + container: qmkfm/base_container + + steps: + - uses: actions/checkout@v2 + with: + submodules: recursive + - name: Run tests + run: make test:all From 7343a2fc93f268dfe1d3eb41c8ad8702cb4dc46e Mon Sep 17 00:00:00 2001 From: Drashna Jaelre <drashna@live.com> Date: Fri, 19 Nov 2021 19:40:02 -0800 Subject: [PATCH 540/595] [Keyboard] Fix xox70 via layout (#15220) --- keyboards/mokey/xox70/keymaps/via/keymap.c | 54 ++++++++++++---------- 1 file changed, 29 insertions(+), 25 deletions(-) diff --git a/keyboards/mokey/xox70/keymaps/via/keymap.c b/keyboards/mokey/xox70/keymaps/via/keymap.c index 61135189bf..66e227e333 100644 --- a/keyboards/mokey/xox70/keymaps/via/keymap.c +++ b/keyboards/mokey/xox70/keymaps/via/keymap.c @@ -12,36 +12,40 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see <http://www.gnu.org/licenses/>. */ - + #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_all( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INSERT, KC_HOME, KC_PGUP, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS,KC_DELETE, KC_END, KC_PGDOWN, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_RSFT,KC_UP, - KC_LCTL, KC_LGUI, KC_LALT,KC_SPC,KC_RALT, KC_GRV, KC_MENU, KC_RCTL,KC_LEFT, KC_DOWN, KC_RGHT), + LAYOUT( + KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INSERT, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DELETE, KC_END, KC_PGDOWN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_GRV, KC_MENU, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), - [1] = LAYOUT_all( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), - [2] = LAYOUT_all( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS), + LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), - [3] = LAYOUT_all( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS) + LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) }; From 0facda9ecb678b0470c3fa1ee18bf236f63a82c9 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Sat, 20 Nov 2021 03:42:27 +0000 Subject: [PATCH 541/595] Lime rev1: fix Configurator implementation (#15213) --- keyboards/lime/rev1/info.json | 84 ++++++++++++++++++++++++++++------- 1 file changed, 68 insertions(+), 16 deletions(-) diff --git a/keyboards/lime/rev1/info.json b/keyboards/lime/rev1/info.json index 14aafb3235..0dcadc7823 100644 --- a/keyboards/lime/rev1/info.json +++ b/keyboards/lime/rev1/info.json @@ -5,21 +5,73 @@ "layouts": { "LAYOUT": { "layout": [ - {"label":"#", "x":3, "y":0}, {"label":"*", "x":11.5, "y":0}, {"label":"@", "x":2, "y":0.13}, {"label":"$", "x":4, "y":0.13}, {"label":"&", "x":10.5, "y":0.13}, - {"label":"(", "x":12.5, "y":0.13}, {"label":"%", "x":5, "y":0.25}, {"label":"^", "x":9.5, "y":0.25}, {"label":"!", "x":1, "y":0.38}, {"label":")", "x":13.5, "y":0.38}, - {"label":"Esc", "x":0, "y":0.5}, {"label":"<i class='fa fa-trash'></i>", "x":14.5, "y":0.5}, {"label":"E", "x":3, "y":1}, {"label":"I", "x":11.5, "y":1}, - {"label":"W", "x":2, "y":1.13}, {"label":"R", "x":4, "y":1.13}, {"label":"U", "x":10.5, "y":1.13}, {"label":"O", "x":12.5, "y":1.13}, {"label":"T", "x":5, "y":1.25}, - {"label":"Y", "x":9.5, "y":1.25}, {"label":"Q", "x":1, "y":1.38}, {"label":"P", "x":13.5, "y":1.38}, {"label":"<i class='fa fa-arrow-left'></i>", "x":0, "y":1.5}, - {"label":"~", "x":14.5, "y":1.5}, {"label":"D", "x":3, "y":2}, {"label":"K", "x":11.5, "y":2}, {"label":"S", "x":2, "y":2.13}, {"label":"F", "x":4, "y":2.13}, - {"label":"J", "x":10.5, "y":2.13}, {"label":"L", "x":12.5, "y":2.13}, {"label":"G", "x":5, "y":2.25}, {"label":"H", "x":9.5, "y":2.25}, {"label":"A", "x":1, "y":2.38}, - {"label":":", "x":13.5, "y":2.38}, {"label":"<i class='fa fa-lock'></i>", "x":0, "y":2.5}, {"label":"\"", "x":14.5, "y":2.5}, {"label":"C", "x":3, "y":3}, - {"label":"<", "x":11.5, "y":3}, {"label":"X", "x":2, "y":3.13}, {"label":"V", "x":4, "y":3.13}, {"label":"M", "x":10.5, "y":3.13}, {"label":">", "x":12.5, "y":3.13}, - {"label":"B", "x":5, "y":3.25}, {"label":"Joystick", "x":6, "y":3.25}, {"label":"Encoder", "x":8.5, "y":3.25}, {"label":"N", "x":9.5, "y":3.25}, - {"label":"Z", "x":1, "y":3.38}, {"label":"?", "x":13.5, "y":3.38}, {"label":"<i class='fa fa-arrow-up'></i>", "x":0, "y":3.5}, {"label":"|", "x":14.5, "y":3.5}, - {"label":"Alt", "x":2.35, "y":4.13}, {"label":"Del", "x":3.35, "y":4.13}, {"label":"{", "x":11.15, "y":4.13}, {"label":"}", "x":12.15, "y":4.13}, - {"label":"OS", "x":1.35, "y":4.35}, {"label":"_", "x":13.15, "y":4.38}, {"label":"Lower", "x":0.35, "y":4.5}, {"label":"+", "x":14.15, "y":4.5}, - {"label":"Ctrl", "x":5.55, "y":2.85}, {"label":"Enter", "x":-0.4, "y":4.1, "h":1.25}, {"label":"Space", "x":-4.1, "y":3.35, "h":1.25}, {"label":"Raise", "x":8.4, "y":11.2} - ] - } + {"label":"Esc", "x":0, "y":0.5}, + {"label":"1!", "x":1, "y":0.38}, + {"label":"2@", "x":2, "y":0.13}, + {"label":"3#", "x":3, "y":0}, + {"label":"4$", "x":4, "y":0.13}, + {"label":"5%", "x":5, "y":0.25}, + {"label":"6^", "x":9, "y":0.25}, + {"label":"7&", "x":10, "y":0.13}, + {"label":"8*", "x":11, "y":0}, + {"label":"9(", "x":12, "y":0.13}, + {"label":"0)", "x":13, "y":0.38}, + {"label":"Backspace", "x":14, "y":0.5}, + + {"label":"Tab", "x":0, "y":1.5}, + {"label":"Q", "x":1, "y":1.38}, + {"label":"W", "x":2, "y":1.13}, + {"label":"E", "x":3, "y":1}, + {"label":"R", "x":4, "y":1.13}, + {"label":"T", "x":5, "y":1.25}, + {"label":"Y", "x":9, "y":1.25}, + {"label":"U", "x":10, "y":1.13}, + {"label":"I", "x":11, "y":1}, + {"label":"O", "x":12, "y":1.13}, + {"label":"P", "x":13, "y":1.38}, + {"label":"`~", "x":14, "y":1.5}, + + {"label":"Caps Lock", "x":0, "y":2.5}, + {"label":"A", "x":1, "y":2.38}, + {"label":"S", "x":2, "y":2.13}, + {"label":"D", "x":3, "y":2}, + {"label":"F", "x":4, "y":2.13}, + {"label":"G", "x":5, "y":2.25}, + {"label":"H", "x":9, "y":2.25}, + {"label":"J", "x":10, "y":2.13}, + {"label":"K", "x":11, "y":2}, + {"label":"L", "x":12, "y":2.13}, + {"label":";:", "x":13, "y":2.38}, + {"label":"'\"", "x":14, "y":2.5}, + + {"label":"Shift", "x":0, "y":3.5}, + {"label":"Z", "x":1, "y":3.38}, + {"label":"X", "x":2, "y":3.13}, + {"label":"C", "x":3, "y":3}, + {"label":"V", "x":4, "y":3.13}, + {"label":"B", "x":5, "y":3.25}, + {"label":"Joystick", "x":6, "y":3.25}, + {"label":"Encoder", "x":8, "y":3.25}, + {"label":"N", "x":9, "y":3.25}, + {"label":"M", "x":10, "y":3.13}, + {"label":",<", "x":11, "y":3}, + {"label":".>", "x":12, "y":3.13}, + {"label":"/?", "x":13, "y":3.38}, + {"label":"\\|", "x":14, "y":3.5}, + + {"label":"Lower", "x":0.35, "y":4.5}, + {"label":"OS", "x":1.35, "y":4.38}, + {"label":"Alt", "x":2.35, "y":4.13}, + {"label":"Del", "x":3.35, "y":4.13}, + {"label":"Ctrl", "x":4.55, "y":4.5}, + {"label":"Enter", "x":5.75, "y":4.25, "h":1.25}, + {"label":"Space", "x":8.25, "y":4.25, "h":1.25}, + {"label":"Raise", "x":9.45, "y":4.5}, + {"label":"[{", "x":10.65, "y":4.13}, + {"label":"]}", "x":11.65, "y":4.13}, + {"label":"-_", "x":12.65, "y":4.38}, + {"label":"=+", "x":13.65, "y":4.5} + ] } + } } From 5de50cf64524c845c73fb3daf1f7ec2ff883f9e9 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Sat, 20 Nov 2021 03:42:44 +0000 Subject: [PATCH 542/595] Undead60M touch-up (#15214) --- keyboards/mechanickeys/undead60m/info.json | 96 +++++++++++++++++++--- keyboards/mechanickeys/undead60m/readme.md | 4 +- 2 files changed, 85 insertions(+), 15 deletions(-) diff --git a/keyboards/mechanickeys/undead60m/info.json b/keyboards/mechanickeys/undead60m/info.json index e1fd210aab..5032974857 100644 --- a/keyboards/mechanickeys/undead60m/info.json +++ b/keyboards/mechanickeys/undead60m/info.json @@ -1,16 +1,86 @@ { - "keyboard_name": "Undead-60M", - "url": "", - "maintainer": "qmk", - "layouts": { - "LAYOUT": { - "layout": [ - {"label": "F1", "x": 0, "y": 0}, {"label": "F2", "x": 1, "y": 0}, {"label": "Esc", "x": 2.5, "y": 0}, {"label": "1", "x": 3.5, "y": 0}, {"label": "2", "x": 4.5, "y": 0}, {"label": "3", "x": 5.5, "y": 0}, {"label": "4", "x": 6.5, "y": 0}, {"label": "5", "x": 7.5, "y": 0}, {"label": "6", "x": 8.5, "y": 0}, {"label": "7", "x": 9.5, "y": 0}, {"label": "8", "x": 10.5, "y": 0}, {"label": "9", "x": 11.5, "y": 0}, {"label": "0", "x": 12.5, "y": 0}, {"label": "-", "x": 13.5, "y": 0}, {"label": "=", "x": 14.5, "y": 0}, {"label": "Backspace", "x": 15.5, "y": 0, "w": 2}, - {"label": "F2", "x": 0, "y": 1}, {"label": "F3", "x": 1, "y": 1}, {"label": "Tab", "x": 2.5, "y": 1, "w": 1.5} , {"label": "Q", "x": 4, "y": 1}, {"label": "W", "x": 5, "y": 1}, {"label": "E", "x": 6, "y": 1}, {"label": "R", "x": 7, "y": 1}, {"label": "T", "x": 8, "y": 1}, {"label": "Y", "x": 9, "y": 1}, {"label": "U", "x": 10, "y": 1}, {"label": "I", "x": 11, "y": 1}, {"label": "O", "x": 12, "y": 1}, {"label": "P", "x": 13, "y": 1}, {"label": "[", "x": 14, "y": 1}, {"label": "]", "x": 15, "y": 1}, {"label": "|", "x": 16, "y": 1, "w": 1.5}, - {"label": "F4", "x": 0, "y": 2}, {"label": "F5", "x": 1, "y": 2}, {"label": "Caps", "x": 2.5, "y": 2, "w": 1.75}, {"label": "A", "x": 4.25, "y": 2}, {"label": "S", "x": 5.25, "y": 2}, {"label": "D", "x": 6.25, "y": 2}, {"label": "F", "x": 7.25, "y": 2}, {"label": "G", "x": 8.25, "y": 2}, {"label": "H", "x": 9.25, "y": 2}, {"label": "J", "x": 10.25, "y": 2}, {"label": "K", "x": 11.25, "y": 2}, {"label": "L", "x": 12.25, "y": 2}, {"label": ";", "x": 13.25, "y": 2}, {"label": "'", "x": 14.25, "y": 2}, {"label": "Enter", "x": 15.25, "y": 2, "w": 2.25}, - {"label": "F6", "x": 0, "y": 3}, {"label": "F7", "x": 1, "y": 3}, {"label": "Shift", "x": 2.5, "y": 3, "w": 2.25}, {"label": "Z", "x": 4.5, "y": 3}, {"label": "X", "x": 5.5, "y": 3}, {"label": "C", "x": 6.5, "y": 3}, {"label": "V", "x": 7.5, "y": 3}, {"label": "B", "x": 8.5, "y": 3}, {"label": "N", "x": 9.5, "y": 3}, {"label": "M", "x": 10.5, "y": 3}, {"label": ",", "x": 11.5, "y": 3}, {"label": ".", "x": 12.5, "y": 3}, {"label": "/", "x": 13.5, "y": 3}, {"label": "Shift", "x": 14.5, "y": 3, "w": 2.75}, - {"label": "F1", "x": 0, "y": 4}, {"label": "F2", "x": 1, "y": 4}, {"label": "Ctrl", "x": 2.5, "y": 4, "w": 1.25}, {"label": "OS", "x": 3.75, "y": 4, "w": 1.25}, {"label": "Alt", "x": 5, "y": 4, "w": 1.25}, {"label": "Space", "x": 6.25, "y": 4}, {"label": "Alt", "x": 12.5, "y": 4, "w": 1.25}, {"label": "OS", "x": 13.75, "y": 4, "w": 1.25}, {"label": "Ctrl", "x": 15, "y": 4, "w": 1.25}, {"label": "Fn", "x": 16.25, "y": 4, "w": 1.25} - ] + "keyboard_name": "Undead-60M", + "url": "", + "maintainer": "jfescobar18", + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"F1", "x":0, "y":0}, + {"label":"F2", "x":1, "y":0}, + {"label":"Esc", "x":2.5, "y":0}, + {"label":"1!", "x":3.5, "y":0}, + {"label":"2@", "x":4.5, "y":0}, + {"label":"3#", "x":5.5, "y":0}, + {"label":"4$", "x":6.5, "y":0}, + {"label":"5%", "x":7.5, "y":0}, + {"label":"6^", "x":8.5, "y":0}, + {"label":"7&", "x":9.5, "y":0}, + {"label":"8*", "x":10.5, "y":0}, + {"label":"9(", "x":11.5, "y":0}, + {"label":"0)", "x":12.5, "y":0}, + {"label":"-_", "x":13.5, "y":0}, + {"label":"=+", "x":14.5, "y":0}, + {"label":"Backspace", "x":15.5, "y":0, "w":2}, + + {"label":"F2", "x":0, "y":1}, + {"label":"F3", "x":1, "y":1}, + {"label":"Tab", "x":2.5, "y":1, "w":1.5}, + {"label":"Q", "x":4, "y":1}, + {"label":"W", "x":5, "y":1}, + {"label":"E", "x":6, "y":1}, + {"label":"R", "x":7, "y":1}, + {"label":"T", "x":8, "y":1}, + {"label":"Y", "x":9, "y":1}, + {"label":"U", "x":10, "y":1}, + {"label":"I", "x":11, "y":1}, + {"label":"O", "x":12, "y":1}, + {"label":"P", "x":13, "y":1}, + {"label":"[{", "x":14, "y":1}, + {"label":"]}", "x":15, "y":1}, + {"label":"\\|", "x":16, "y":1, "w":1.5}, + + {"label":"F4", "x":0, "y":2}, + {"label":"F5", "x":1, "y":2}, + {"label":"Caps", "x":2.5, "y":2, "w":1.75}, + {"label":"A", "x":4.25, "y":2}, + {"label":"S", "x":5.25, "y":2}, + {"label":"D", "x":6.25, "y":2}, + {"label":"F", "x":7.25, "y":2}, + {"label":"G", "x":8.25, "y":2}, + {"label":"H", "x":9.25, "y":2}, + {"label":"J", "x":10.25, "y":2}, + {"label":"K", "x":11.25, "y":2}, + {"label":"L", "x":12.25, "y":2}, + {"label":";:", "x":13.25, "y":2}, + {"label":"'\"", "x":14.25, "y":2}, + {"label":"Enter", "x":15.25, "y":2, "w":2.25}, + + {"label":"F6", "x":0, "y":3}, + {"label":"F7", "x":1, "y":3}, + {"label":"Shift", "x":2.5, "y":3, "w":2.25}, + {"label":"Z", "x":4.75, "y":3}, + {"label":"X", "x":5.75, "y":3}, + {"label":"C", "x":6.75, "y":3}, + {"label":"V", "x":7.75, "y":3}, + {"label":"B", "x":8.75, "y":3}, + {"label":"N", "x":9.75, "y":3}, + {"label":"M", "x":10.75, "y":3}, + {"label":",<", "x":11.75, "y":3}, + {"label":".>", "x":12.75, "y":3}, + {"label":"/?", "x":13.75, "y":3}, + {"label":"Shift", "x":14.75, "y":3, "w":2.75}, + + {"label":"F1", "x":0, "y":4}, + {"label":"F2", "x":1, "y":4}, + {"label":"Ctrl", "x":2.5, "y":4, "w":1.25}, + {"label":"OS", "x":3.75, "y":4, "w":1.25}, + {"label":"Alt", "x":5, "y":4, "w":1.25}, + {"label":"Space", "x":6.25, "y":4, "w":6.25}, + {"label":"Alt", "x":12.5, "y":4, "w":1.25}, + {"label":"OS", "x":13.75, "y":4, "w":1.25}, + {"label":"Ctrl", "x":15, "y":4, "w":1.25}, + {"label":"Fn", "x":16.25, "y":4, "w":1.25} + ] + } } - } } diff --git a/keyboards/mechanickeys/undead60m/readme.md b/keyboards/mechanickeys/undead60m/readme.md index 6f62d30333..77deb26a99 100644 --- a/keyboards/mechanickeys/undead60m/readme.md +++ b/keyboards/mechanickeys/undead60m/readme.md @@ -18,10 +18,10 @@ A 60% PCB with some add-ons Make example for this keyboard (after setting up your build environment): - make undead60m/:default + make mechanickeys/undead60m:default Flashing example for this keyboard: - make undead60m:default:flash + make mechanickeys/undead60m:default:flash See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). From 9ccd22e8de490c8a1a97fcb09ebf791af7089ea7 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Sat, 20 Nov 2021 03:44:10 +0000 Subject: [PATCH 543/595] Minimon Index Tab touch-up (#15224) --- keyboards/minimon/index_tab/index_tab.h | 60 +++- keyboards/minimon/index_tab/info.json | 274 +++++++++++++++++- .../index_tab/keymaps/default/keymap.c | 6 +- .../index_tab/keymaps/default_2x2u/keymap.c | 37 +++ .../keymaps/default_7u_space/keymap.c | 39 +++ .../minimon/index_tab/keymaps/via/keymap.c | 8 +- 6 files changed, 402 insertions(+), 22 deletions(-) create mode 100644 keyboards/minimon/index_tab/keymaps/default_2x2u/keymap.c create mode 100644 keyboards/minimon/index_tab/keymaps/default_7u_space/keymap.c diff --git a/keyboards/minimon/index_tab/index_tab.h b/keyboards/minimon/index_tab/index_tab.h index cb9d3c5ae6..e1419379ba 100644 --- a/keyboards/minimon/index_tab/index_tab.h +++ b/keyboards/minimon/index_tab/index_tab.h @@ -18,7 +18,31 @@ #include "quantum.h" -#define LAYOUT( \ +#define XXX KC_NO + +/* + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ + * │10 │11 │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │ + * ├───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┤ + * │10 │11 │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │ + * ├───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┤ + * │20 │21 │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │ + * ├───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┤ + * │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3c │ + * ├───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┤ + * │40 │41 │42 │43 │44 │45 │46 │47 │48 │49 │4a │4b │4c │ + * ├───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┼───┤ + * │50 │51 │52 │53 │54 │55 │56 │57 │58 │59 │5a │5b │5c │ + * └───┴───┴───┴───┴───┴───┴───┴───┴───┴───┴───┴───┴───┘ + * ┌───┬───┬───┬───┬───────┬───────┬───┬───┬───┬───┬───┐ + * │50 │51 │52 │53 │54 │56 │58 │59 │5a │5b │5c │ 2x2u + * └───┴───┴───┴───┴───────┴───────┴───┴───┴───┴───┴───┘ + * ┌───┬───┬───┬───────────────────────────┬───┬───┬───┐ + * │50 │51 │52 │ 56 │5a │5b │5c │ 7u_space + * └───┴───┴───┴───────────────────────────┴───┴───┴───┘ + */ + +#define LAYOUT_ortho_6x13( \ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, K0c, \ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, K1c, \ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, K2c, \ @@ -34,3 +58,37 @@ { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4a, K4b, K4c }, \ { K50, K51, K52, K53, K54, K55, K56, K57, K58, K59, K5a, K5b, K5c } \ } + +#define LAYOUT_2x2u( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, K0c, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, K1c, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, K2c, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b, K3c, \ + K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4a, K4b, K4c, \ + K50, K51, K52, K53, K54, K56, K58, K59, K5a, K5b, K5c \ +) \ + { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, K0c }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, K1c }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, K2c }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b, K3c }, \ + { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4a, K4b, K4c }, \ + { K50, K51, K52, K53, K54, XXX, K56, XXX, K58, K59, K5a, K5b, K5c } \ + } + +#define LAYOUT_7u_space( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, K0c, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, K1c, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, K2c, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b, K3c, \ + K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4a, K4b, K4c, \ + K50, K51, K52, K56, K5a, K5b, K5c \ +) \ + { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0a, K0b, K0c }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1a, K1b, K1c }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2a, K2b, K2c }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3a, K3b, K3c }, \ + { K40, K41, K42, K43, K44, K45, K46, K47, K48, K49, K4a, K4b, K4c }, \ + { K50, K51, K52, XXX, XXX, XXX, K56, XXX, XXX, XXX, K5a, K5b, K5c } \ + } diff --git a/keyboards/minimon/index_tab/info.json b/keyboards/minimon/index_tab/info.json index 21ff5a3cde..209d3044fe 100644 --- a/keyboards/minimon/index_tab/info.json +++ b/keyboards/minimon/index_tab/info.json @@ -1,17 +1,263 @@ { - "keyboard_name": "Index Tab", - "maintainer": "kyrremann", - "url": "https://github.com/Kyrremann/index-tab", - "layouts": { - "LAYOUT_all": { - "layout": [ - {"label":"CAPS", "x":0, "y":0}, {"label":"F1", "x":1, "y":0}, {"label":"F2", "x":2, "y":0}, {"label":"F3", "x":3, "y":0}, {"label":"F4", "x":4, "y":0}, {"label":"F5", "x":5, "y":0}, {"label":"F6", "x":6, "y":0}, {"label":"F7", "x":7, "y":0}, {"label":"F8", "x":8, "y":0}, {"label":"F9", "x":9, "y":0}, {"label":"F10", "x":10, "y":0}, {"label":"F11", "x":11, "y":0}, {"label":"F12", "x":12, "y":0}, - {"label":"<", "x":0, "y":1}, {"label":"1", "x":1, "y":1}, {"label":"2", "x":2, "y":1}, {"label":"3", "x":3, "y":1}, {"label":"4", "x":4, "y":1}, {"label":"5", "x":5, "y":1}, {"label":"6", "x":6, "y":1}, {"label":"7", "x":7, "y":1}, {"label":"8", "x":8, "y":1}, {"label":"9", "x":9, "y":1}, {"label":"0", "x":10, "y":1}, {"label":"+", "x":11, "y":1}, {"label":"\u00b4", "x":12, "y":1}, - {"label":"TAB", "x":0, "y":2}, {"label":"q", "x":1, "y":2}, {"label":"w", "x":2, "y":2}, {"label":"e", "x":3, "y":2}, {"label":"r", "x":4, "y":2}, {"label":"t", "x":5, "y":2}, {"label":"y", "x":6, "y":2}, {"label":"u", "x":7, "y":2}, {"label":"i", "x":8, "y":2}, {"label":"o", "x":9, "y":2}, {"label":"p", "x":10, "y":2}, {"label":"\u00e5", "x":11, "y":2}, {"label":"BKSP", "x":12, "y":2}, - {"label":"CTRL", "x":0, "y":3}, {"label":"a", "x":1, "y":3}, {"label":"s", "x":2, "y":3}, {"label":"d", "x":3, "y":3}, {"label":"f", "x":4, "y":3}, {"label":"g", "x":5, "y":3}, {"label":"h", "x":6, "y":3}, {"label":"j", "x":7, "y":3}, {"label":"k", "x":8, "y":3}, {"label":"l", "x":9, "y":3}, {"label":"\u00f8", "x":10, "y":3}, {"label":"\u00e6", "x":11, "y":3}, {"label":"\u00a8", "x":12, "y":3}, - {"label":"SHIFT", "x":0, "y":4}, {"label":"z", "x":1, "y":4}, {"label":"x", "x":2, "y":4}, {"label":"c", "x":3, "y":4}, {"label":"v", "x":4, "y":4}, {"label":"b", "x":5, "y":4}, {"label":"n", "x":6, "y":4}, {"label":"m", "x":7, "y":4}, {"label":",", "x":8, "y":4}, {"label":".", "x":9, "y":4}, {"label":"-", "x":10, "y":4}, {"label":"\u2191", "x":11, "y":4}, {"label":"\u21b2", "x":12, "y":4}, - {"label":"ESC", "x":0, "y":5}, {"label":"\u00a7", "x":1, "y":5}, {"label":"WIN", "x":2, "y":5}, {"label":"LALT", "x":3, "y":5}, {"x":4, "y":5, "w":2}, {"x":6, "y":5, "w":2}, {"label":"FN", "x":8, "y":5}, {"label":"@", "x":9, "y":5}, {"label":"\u2190", "x":10, "y":5}, {"label":"\u2193", "x":11, "y":5}, {"label":"\u2192", "x":12, "y":5} - ] + "keyboard_name": "Index Tab", + "maintainer": "kyrremann", + "url": "https://github.com/Kyrremann/index-tab", + "layout_aliases": { + "LAYOUT": "LAYOUT_ortho_6x13" + }, + "layouts": { + "LAYOUT_ortho_6x13": { + "layout": [ + {"label":"CAPS", "x":0, "y":0}, + {"label":"F1", "x":1, "y":0}, + {"label":"F2", "x":2, "y":0}, + {"label":"F3", "x":3, "y":0}, + {"label":"F4", "x":4, "y":0}, + {"label":"F5", "x":5, "y":0}, + {"label":"F6", "x":6, "y":0}, + {"label":"F7", "x":7, "y":0}, + {"label":"F8", "x":8, "y":0}, + {"label":"F9", "x":9, "y":0}, + {"label":"F10", "x":10, "y":0}, + {"label":"F11", "x":11, "y":0}, + {"label":"F12", "x":12, "y":0}, + + {"label":"<>", "x":0, "y":1}, + {"label":"1!", "x":1, "y":1}, + {"label":"2\"", "x":2, "y":1}, + {"label":"3#", "x":3, "y":1}, + {"label":"4\u00a4", "x":4, "y":1}, + {"label":"5%", "x":5, "y":1}, + {"label":"6&", "x":6, "y":1}, + {"label":"7/", "x":7, "y":1}, + {"label":"8(", "x":8, "y":1}, + {"label":"9)", "x":9, "y":1}, + {"label":"0=", "x":10, "y":1}, + {"label":"+?", "x":11, "y":1}, + {"label":"\\`", "x":12, "y":1}, + + {"label":"TAB", "x":0, "y":2}, + {"label":"Q", "x":1, "y":2}, + {"label":"W", "x":2, "y":2}, + {"label":"E", "x":3, "y":2}, + {"label":"R", "x":4, "y":2}, + {"label":"T", "x":5, "y":2}, + {"label":"Y", "x":6, "y":2}, + {"label":"U", "x":7, "y":2}, + {"label":"I", "x":8, "y":2}, + {"label":"O", "x":9, "y":2}, + {"label":"P", "x":10, "y":2}, + {"label":"\u00c5", "x":11, "y":2}, + {"label":"BKSP", "x":12, "y":2}, + + {"label":"CTRL", "x":0, "y":3}, + {"label":"A", "x":1, "y":3}, + {"label":"S", "x":2, "y":3}, + {"label":"D", "x":3, "y":3}, + {"label":"F", "x":4, "y":3}, + {"label":"G", "x":5, "y":3}, + {"label":"H", "x":6, "y":3}, + {"label":"J", "x":7, "y":3}, + {"label":"K", "x":8, "y":3}, + {"label":"L", "x":9, "y":3}, + {"label":"\u00d8", "x":10, "y":3}, + {"label":"\u00c6", "x":11, "y":3}, + {"label":"\u00a8^", "x":12, "y":3}, + + {"label":"SHIFT", "x":0, "y":4}, + {"label":"Z", "x":1, "y":4}, + {"label":"X", "x":2, "y":4}, + {"label":"C", "x":3, "y":4}, + {"label":"V", "x":4, "y":4}, + {"label":"B", "x":5, "y":4}, + {"label":"N", "x":6, "y":4}, + {"label":"M", "x":7, "y":4}, + {"label":",;", "x":8, "y":4}, + {"label":".:", "x":9, "y":4}, + {"label":"-_", "x":10, "y":4}, + {"label":"\u2191", "x":11, "y":4}, + {"label":"\u21b2", "x":12, "y":4}, + + {"label":"ESC", "x":0, "y":5}, + {"label":"|\u00a7", "x":1, "y":5}, + {"label":"WIN", "x":2, "y":5}, + {"label":"LALT", "x":3, "y":5}, + {"label":"Space", "x":4, "y":5}, + {"label":"Space", "x":5, "y":5}, + {"label":"Space", "x":6, "y":5}, + {"label":"Space", "x":7, "y":5}, + {"label":"FN", "x":8, "y":5}, + {"label":"'*", "x":9, "y":5}, + {"label":"\u2190", "x":10, "y":5}, + {"label":"\u2193", "x":11, "y":5}, + {"label":"\u2192", "x":12, "y":5} + ] + }, + "LAYOUT_2x2u": { + "layout": [ + {"label":"CAPS", "x":0, "y":0}, + {"label":"F1", "x":1, "y":0}, + {"label":"F2", "x":2, "y":0}, + {"label":"F3", "x":3, "y":0}, + {"label":"F4", "x":4, "y":0}, + {"label":"F5", "x":5, "y":0}, + {"label":"F6", "x":6, "y":0}, + {"label":"F7", "x":7, "y":0}, + {"label":"F8", "x":8, "y":0}, + {"label":"F9", "x":9, "y":0}, + {"label":"F10", "x":10, "y":0}, + {"label":"F11", "x":11, "y":0}, + {"label":"F12", "x":12, "y":0}, + + {"label":"<>", "x":0, "y":1}, + {"label":"1!", "x":1, "y":1}, + {"label":"2\"", "x":2, "y":1}, + {"label":"3#", "x":3, "y":1}, + {"label":"4\u00a4", "x":4, "y":1}, + {"label":"5%", "x":5, "y":1}, + {"label":"6&", "x":6, "y":1}, + {"label":"7/", "x":7, "y":1}, + {"label":"8(", "x":8, "y":1}, + {"label":"9)", "x":9, "y":1}, + {"label":"0=", "x":10, "y":1}, + {"label":"+?", "x":11, "y":1}, + {"label":"\\`", "x":12, "y":1}, + + {"label":"TAB", "x":0, "y":2}, + {"label":"Q", "x":1, "y":2}, + {"label":"W", "x":2, "y":2}, + {"label":"E", "x":3, "y":2}, + {"label":"R", "x":4, "y":2}, + {"label":"T", "x":5, "y":2}, + {"label":"Y", "x":6, "y":2}, + {"label":"U", "x":7, "y":2}, + {"label":"I", "x":8, "y":2}, + {"label":"O", "x":9, "y":2}, + {"label":"P", "x":10, "y":2}, + {"label":"\u00c5", "x":11, "y":2}, + {"label":"BKSP", "x":12, "y":2}, + + {"label":"CTRL", "x":0, "y":3}, + {"label":"A", "x":1, "y":3}, + {"label":"S", "x":2, "y":3}, + {"label":"D", "x":3, "y":3}, + {"label":"F", "x":4, "y":3}, + {"label":"G", "x":5, "y":3}, + {"label":"H", "x":6, "y":3}, + {"label":"J", "x":7, "y":3}, + {"label":"K", "x":8, "y":3}, + {"label":"L", "x":9, "y":3}, + {"label":"\u00d8", "x":10, "y":3}, + {"label":"\u00c6", "x":11, "y":3}, + {"label":"\u00a8^", "x":12, "y":3}, + + {"label":"SHIFT", "x":0, "y":4}, + {"label":"Z", "x":1, "y":4}, + {"label":"X", "x":2, "y":4}, + {"label":"C", "x":3, "y":4}, + {"label":"V", "x":4, "y":4}, + {"label":"B", "x":5, "y":4}, + {"label":"N", "x":6, "y":4}, + {"label":"M", "x":7, "y":4}, + {"label":",;", "x":8, "y":4}, + {"label":".:", "x":9, "y":4}, + {"label":"-_", "x":10, "y":4}, + {"label":"\u2191", "x":11, "y":4}, + {"label":"\u21b2", "x":12, "y":4}, + + {"label":"ESC", "x":0, "y":5}, + {"label":"|\u00a7", "x":1, "y":5}, + {"label":"WIN", "x":2, "y":5}, + {"label":"LALT", "x":3, "y":5}, + {"label":"Space", "x":4, "y":5, "w":2}, + {"label":"Space", "x":6, "y":5, "w":2}, + {"label":"FN", "x":8, "y":5}, + {"label":"'*", "x":9, "y":5}, + {"label":"\u2190", "x":10, "y":5}, + {"label":"\u2193", "x":11, "y":5}, + {"label":"\u2192", "x":12, "y":5} + ] + }, + "LAYOUT_7u_space": { + "layout": [ + {"label":"Fn/Caps", "x":0, "y":0}, + {"label":"F1", "x":1, "y":0}, + {"label":"F2", "x":2, "y":0}, + {"label":"F3", "x":3, "y":0}, + {"label":"F4", "x":4, "y":0}, + {"label":"F5", "x":5, "y":0}, + {"label":"F6", "x":6, "y":0}, + {"label":"F7", "x":7, "y":0}, + {"label":"F8", "x":8, "y":0}, + {"label":"F9", "x":9, "y":0}, + {"label":"F10", "x":10, "y":0}, + {"label":"F11", "x":11, "y":0}, + {"label":"F12", "x":12, "y":0}, + + {"label":"<>", "x":0, "y":1}, + {"label":"1!", "x":1, "y":1}, + {"label":"2\"", "x":2, "y":1}, + {"label":"3#", "x":3, "y":1}, + {"label":"4\u00a4", "x":4, "y":1}, + {"label":"5%", "x":5, "y":1}, + {"label":"6&", "x":6, "y":1}, + {"label":"7/", "x":7, "y":1}, + {"label":"8(", "x":8, "y":1}, + {"label":"9)", "x":9, "y":1}, + {"label":"0=", "x":10, "y":1}, + {"label":"+?", "x":11, "y":1}, + {"label":"\\`", "x":12, "y":1}, + + {"label":"TAB", "x":0, "y":2}, + {"label":"Q", "x":1, "y":2}, + {"label":"W", "x":2, "y":2}, + {"label":"E", "x":3, "y":2}, + {"label":"R", "x":4, "y":2}, + {"label":"T", "x":5, "y":2}, + {"label":"Y", "x":6, "y":2}, + {"label":"U", "x":7, "y":2}, + {"label":"I", "x":8, "y":2}, + {"label":"O", "x":9, "y":2}, + {"label":"P", "x":10, "y":2}, + {"label":"\u00c5", "x":11, "y":2}, + {"label":"BKSP", "x":12, "y":2}, + + {"label":"CTRL", "x":0, "y":3}, + {"label":"A", "x":1, "y":3}, + {"label":"S", "x":2, "y":3}, + {"label":"D", "x":3, "y":3}, + {"label":"F", "x":4, "y":3}, + {"label":"G", "x":5, "y":3}, + {"label":"H", "x":6, "y":3}, + {"label":"J", "x":7, "y":3}, + {"label":"K", "x":8, "y":3}, + {"label":"L", "x":9, "y":3}, + {"label":"\u00d8", "x":10, "y":3}, + {"label":"\u00c6", "x":11, "y":3}, + {"label":"\u00a8^", "x":12, "y":3}, + + {"label":"SHIFT", "x":0, "y":4}, + {"label":"Z", "x":1, "y":4}, + {"label":"X", "x":2, "y":4}, + {"label":"C", "x":3, "y":4}, + {"label":"V", "x":4, "y":4}, + {"label":"B", "x":5, "y":4}, + {"label":"N", "x":6, "y":4}, + {"label":"M", "x":7, "y":4}, + {"label":",;", "x":8, "y":4}, + {"label":".:", "x":9, "y":4}, + {"label":"-_", "x":10, "y":4}, + {"label":"\u2191", "x":11, "y":4}, + {"label":"\u21b2", "x":12, "y":4}, + + {"label":"GESC", "x":0, "y":5}, + {"label":"WIN", "x":1, "y":5}, + {"label":"LALT", "x":2, "y":5}, + {"label":"Space", "x":3, "y":5, "w":7}, + {"label":"\u2190", "x":10, "y":5}, + {"label":"\u2193", "x":11, "y":5}, + {"label":"\u2192", "x":12, "y":5} + ] + } } - } } diff --git a/keyboards/minimon/index_tab/keymaps/default/keymap.c b/keyboards/minimon/index_tab/keymaps/default/keymap.c index 9f2a3d1320..95e2f3427e 100644 --- a/keyboards/minimon/index_tab/keymaps/default/keymap.c +++ b/keyboards/minimon/index_tab/keymaps/default/keymap.c @@ -15,7 +15,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[0] = LAYOUT( +[0] = LAYOUT_ortho_6x13( KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUBS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_BSPC, @@ -24,7 +24,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_ESC, KC_GRV, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_SPC, TG(1), KC_BSLS, KC_LEFT, KC_DOWN, KC_RGHT ), -[1] = LAYOUT( +[1] = LAYOUT_ortho_6x13( KC_TRNS, RGB_TOG, RGB_MOD, RGB_RMOD,RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_SPI, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P7, KC_P8, KC_P9, KC_PPLS, @@ -33,7 +33,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_MPLY, KC_MPLY, KC_MPLY, KC_TRNS, KC_P0, KC_P0, KC_PDOT, KC_PENT ), -[2] = LAYOUT( +[2] = LAYOUT_ortho_6x13( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, diff --git a/keyboards/minimon/index_tab/keymaps/default_2x2u/keymap.c b/keyboards/minimon/index_tab/keymaps/default_2x2u/keymap.c new file mode 100644 index 0000000000..999e19fb69 --- /dev/null +++ b/keyboards/minimon/index_tab/keymaps/default_2x2u/keymap.c @@ -0,0 +1,37 @@ +/* +Copyright 2020 Kyrre Havik Eriksen + 2021 James Young for QMK (@noroadsleft) +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_2x2u( + KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + KC_NUBS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_BSPC, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_RBRC, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_UP, KC_ENT, + KC_ESC, KC_GRV, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, TG(1), KC_BSLS, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT_2x2u( + KC_TRNS, RGB_TOG, RGB_MOD, RGB_RMOD,RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_SPI, RGB_SPD, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, KC_TRNS, KC_P4, KC_P5, KC_P6, KC_PCMM, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MSTP, KC_VOLD, KC_MUTE, KC_VOLU, KC_MNXT, KC_P1, KC_P2, KC_P3, KC_PEQL, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_MPLY, KC_TRNS, KC_P0, KC_P0, KC_PDOT, KC_PENT + ), + +}; diff --git a/keyboards/minimon/index_tab/keymaps/default_7u_space/keymap.c b/keyboards/minimon/index_tab/keymaps/default_7u_space/keymap.c new file mode 100644 index 0000000000..ea9e88568f --- /dev/null +++ b/keyboards/minimon/index_tab/keymaps/default_7u_space/keymap.c @@ -0,0 +1,39 @@ +/* +Copyright 2020 Kyrre Havik Eriksen + 2021 James Young for QMK (@noroadsleft) +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see <http://www.gnu.org/licenses/>. +*/ +#include QMK_KEYBOARD_H + +#define LT1_CAP LT(1, KC_CAPS) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + + [0] = LAYOUT_7u_space( + LT1_CAP, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, + KC_NUBS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_BSPC, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_RBRC, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_UP, KC_ENT, + KC_GESC, KC_LGUI, KC_LALT, KC_SPC, KC_LEFT, KC_DOWN, KC_RGHT + ), + + [1] = LAYOUT_7u_space( + KC_TRNS, RGB_TOG, RGB_MOD, RGB_RMOD,RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_SPI, RGB_SPD, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P7, KC_P8, KC_P9, KC_PPLS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_MNXT, KC_TRNS, KC_TRNS, KC_TRNS, KC_P4, KC_P5, KC_P6, KC_PCMM, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MSTP, KC_VOLD, KC_MUTE, KC_VOLU, KC_MNXT, KC_P1, KC_P2, KC_P3, KC_PEQL, + KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_P0, KC_PDOT, KC_PENT + ), + +}; diff --git a/keyboards/minimon/index_tab/keymaps/via/keymap.c b/keyboards/minimon/index_tab/keymaps/via/keymap.c index f6f0e0da1e..f3bac2aee8 100644 --- a/keyboards/minimon/index_tab/keymaps/via/keymap.c +++ b/keyboards/minimon/index_tab/keymaps/via/keymap.c @@ -15,7 +15,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { -[0] = LAYOUT( +[0] = LAYOUT_ortho_6x13( KC_CAPS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUBS, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_BSPC, @@ -24,7 +24,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_ESC, KC_GRV, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_SPC, TG(1), KC_LEFT, KC_DOWN, KC_UP, KC_RGHT ), -[1] = LAYOUT( +[1] = LAYOUT_ortho_6x13( KC_TRNS, RGB_TOG, RGB_MOD, RGB_RMOD,RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, RGB_SPI, RGB_SPD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PSLS, KC_PAST, KC_PMNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_P7, KC_P8, KC_P9, KC_PPLS, @@ -33,7 +33,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_TRNS, KC_TRNS, KC_MPLY, KC_TRNS, KC_P0, KC_P0, KC_PDOT, KC_PEQL ), -[2] = LAYOUT( +[2] = LAYOUT_ortho_6x13( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, @@ -42,7 +42,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), -[3] = LAYOUT( +[3] = LAYOUT_ortho_6x13( KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, From f7b24e296593e3f054f31210eb9c5955ee1ff59e Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Sat, 20 Nov 2021 03:44:23 +0000 Subject: [PATCH 544/595] Meletrix Zoom65 Refactor (#15222) --- keyboards/meletrix/zoom65/info.json | 1036 ++++++++++------- .../{65_ansi => 65_ansi_blocker}/keymap.c | 0 .../{65_ansi => 65_ansi_blocker}/readme.md | 0 .../keymap.c | 16 +- .../65_ansi_blocker_split_bs/readme.md | 1 + .../keymap.c | 14 +- .../65_ansi_blocker_split_lshift/readme.md | 1 + .../keymap.c | 12 +- .../65_ansi_blocker_split_space/readme.md | 1 + .../meletrix/zoom65/keymaps/65_iso/readme.md | 1 - .../{65_iso => 65_iso_blocker}/keymap.c | 14 +- .../zoom65/keymaps/65_iso_blocker/readme.md | 1 + .../keymaps/65_iso_blocker_split_bs/keymap.c | 34 + .../keymaps/65_iso_blocker_split_bs/readme.md | 1 + .../65_iso_blocker_split_space/keymap.c | 34 + .../65_iso_blocker_split_space/readme.md | 1 + .../zoom65/keymaps/65_split_bs/readme.md | 1 - .../zoom65/keymaps/65_split_lshift/readme.md | 1 - .../zoom65/keymaps/65_split_space/readme.md | 1 - .../meletrix/zoom65/keymaps/default/keymap.c | 12 +- .../meletrix/zoom65/keymaps/via/keymap.c | 24 +- keyboards/meletrix/zoom65/readme.md | 10 +- keyboards/meletrix/zoom65/rules.mk | 2 +- keyboards/meletrix/zoom65/zoom65.h | 126 +- 24 files changed, 813 insertions(+), 531 deletions(-) rename keyboards/meletrix/zoom65/keymaps/{65_ansi => 65_ansi_blocker}/keymap.c (100%) rename keyboards/meletrix/zoom65/keymaps/{65_ansi => 65_ansi_blocker}/readme.md (100%) rename keyboards/meletrix/zoom65/keymaps/{65_split_bs => 65_ansi_blocker_split_bs}/keymap.c (82%) create mode 100644 keyboards/meletrix/zoom65/keymaps/65_ansi_blocker_split_bs/readme.md rename keyboards/meletrix/zoom65/keymaps/{65_split_lshift => 65_ansi_blocker_split_lshift}/keymap.c (80%) create mode 100644 keyboards/meletrix/zoom65/keymaps/65_ansi_blocker_split_lshift/readme.md rename keyboards/meletrix/zoom65/keymaps/{65_split_space => 65_ansi_blocker_split_space}/keymap.c (78%) create mode 100644 keyboards/meletrix/zoom65/keymaps/65_ansi_blocker_split_space/readme.md delete mode 100644 keyboards/meletrix/zoom65/keymaps/65_iso/readme.md rename keyboards/meletrix/zoom65/keymaps/{65_iso => 65_iso_blocker}/keymap.c (81%) create mode 100644 keyboards/meletrix/zoom65/keymaps/65_iso_blocker/readme.md create mode 100644 keyboards/meletrix/zoom65/keymaps/65_iso_blocker_split_bs/keymap.c create mode 100644 keyboards/meletrix/zoom65/keymaps/65_iso_blocker_split_bs/readme.md create mode 100644 keyboards/meletrix/zoom65/keymaps/65_iso_blocker_split_space/keymap.c create mode 100644 keyboards/meletrix/zoom65/keymaps/65_iso_blocker_split_space/readme.md delete mode 100644 keyboards/meletrix/zoom65/keymaps/65_split_bs/readme.md delete mode 100644 keyboards/meletrix/zoom65/keymaps/65_split_lshift/readme.md delete mode 100644 keyboards/meletrix/zoom65/keymaps/65_split_space/readme.md diff --git a/keyboards/meletrix/zoom65/info.json b/keyboards/meletrix/zoom65/info.json index 49535c106e..8cc7dce8c3 100644 --- a/keyboards/meletrix/zoom65/info.json +++ b/keyboards/meletrix/zoom65/info.json @@ -1,466 +1,622 @@ { "keyboard_name": "zoom65", "url": "https://zoom65.com/", - "maintainer": "qmk", + "maintainer": "spbgzh", "layouts": { "LAYOUT_all": { "layout": [ - { "label": "Esc", "x": 0, "y": 0 }, - { "label": "1", "x": 1, "y": 0 }, - { "label": "2", "x": 2, "y": 0 }, - { "label": "3", "x": 3, "y": 0 }, - { "label": "4", "x": 4, "y": 0 }, - { "label": "5", "x": 5, "y": 0 }, - { "label": "6", "x": 6, "y": 0 }, - { "label": "7", "x": 7, "y": 0 }, - { "label": "8", "x": 8, "y": 0 }, - { "label": "9", "x": 9, "y": 0 }, - { "label": "0", "x": 10, "y": 0 }, - { "label": "-", "x": 11, "y": 0 }, - { "label": "=", "x": 12, "y": 0 }, - { "label": "Backspace", "x": 13, "y": 0 }, - { "label": "EncoderRotateL", "x": 15, "y": 0, "w": 0.5 }, - { "label": "EncoderClick", "x": 15.5, "y": 0 }, - { "label": "EncoderRotateR", "x": 16.5, "y": 0, "w": 0.5 }, - - { "label": "Tab", "x": 0, "y": 1, "w": 1.5 }, - { "label": "Q", "x": 1.5, "y": 1 }, - { "label": "W", "x": 2.5, "y": 1 }, - { "label": "E", "x": 3.5, "y": 1 }, - { "label": "R", "x": 4.5, "y": 1 }, - { "label": "T", "x": 5.5, "y": 1 }, - { "label": "Y", "x": 6.5, "y": 1 }, - { "label": "U", "x": 7.5, "y": 1 }, - { "label": "I", "x": 8.5, "y": 1 }, - { "label": "O", "x": 9.5, "y": 1 }, - { "label": "P", "x": 10.5, "y": 1 }, - { "label": "[", "x": 11.5, "y": 1 }, - { "label": "]", "x": 12.5, "y": 1 }, - { "label": "\\", "x": 13.5, "y": 1, "w": 1.5 }, - { "label": "Delete", "x": 15, "y": 1 }, - - { "label": "Caps Lock", "x": 0, "y": 2, "w": 1.75 }, - { "label": "A", "x": 1.75, "y": 2 }, - { "label": "S", "x": 2.75, "y": 2 }, - { "label": "D", "x": 3.75, "y": 2 }, - { "label": "F", "x": 4.75, "y": 2 }, - { "label": "G", "x": 5.75, "y": 2 }, - { "label": "H", "x": 6.75, "y": 2 }, - { "label": "J", "x": 7.75, "y": 2 }, - { "label": "K", "x": 8.75, "y": 2 }, - { "label": "L", "x": 9.75, "y": 2 }, - { "label": ";", "x": 10.75, "y": 2 }, - { "label": "'", "x": 11.75, "y": 2 }, - { "label": "Enter", "x": 12.75, "y": 2, "w": 2.25 }, - { "label": "Backspace", "x": 14, "y": 0 }, - { "label": "PageUp", "x": 15, "y": 2 }, - - { "label": "Shift1", "x": 0, "y": 3, "w": 1.25 }, - { "label": "Shift2", "x": 1.25, "y": 3 }, - { "label": "Z", "x": 2.25, "y": 3 }, - { "label": "X", "x": 3.25, "y": 3 }, - { "label": "C", "x": 4.25, "y": 3 }, - { "label": "V", "x": 5.25, "y": 3 }, - { "label": "B", "x": 6.25, "y": 3 }, - { "label": "N", "x": 7.25, "y": 3 }, - { "label": "M", "x": 8.25, "y": 3 }, - { "label": ",", "x": 9.25, "y": 3 }, - { "label": ".", "x": 10.25, "y": 3 }, - { "label": "/", "x": 11.25, "y": 3 }, - { "label": "Shift", "x": 12.25, "y": 3, "w": 1.75 }, - { "label": "\u2191", "x": 14, "y": 3 }, - { "label": "End", "x": 15, "y": 3 }, - - { "label": "Ctrl", "x": 0, "y": 4, "w": 1.25 }, - { "label": "Win", "x": 1.25, "y": 4, "w": 1.25 }, - { "label": "Alt", "x": 2.5, "y": 4, "w": 1.25 }, - { "x": 3.75, "y": 4, "w": 2.25 }, - { "x": 6, "y": 4, "w": 1.25 }, - { "x": 7.25, "y": 4, "w": 2.75 }, - { "label": "Alt", "x": 10, "y": 4, "w": 1.25 }, - { "label": "Fn", "x": 11.25, "y": 4, "w": 1.25 }, - { "label": "\u2190", "x": 13, "y": 4 }, - { "label": "\u2193", "x": 14, "y": 4 }, - { "label": "\u2192", "x": 15, "y": 4 } + {"label":"Esc", "x":0, "y":0}, + {"label":"1!", "x":1, "y":0}, + {"label":"2@", "x":2, "y":0}, + {"label":"3#", "x":3, "y":0}, + {"label":"4$", "x":4, "y":0}, + {"label":"5%", "x":5, "y":0}, + {"label":"6^", "x":6, "y":0}, + {"label":"7&", "x":7, "y":0}, + {"label":"8*", "x":8, "y":0}, + {"label":"9(", "x":9, "y":0}, + {"label":"0)", "x":10, "y":0}, + {"label":"-_", "x":11, "y":0}, + {"label":"=+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0}, + {"label":"Backspace", "x":14, "y":0}, + {"label":"EncoderRotateL", "x":15, "y":0, "w":0.5}, + {"label":"EncoderClick", "x":15.5, "y":0}, + {"label":"EncoderRotateR", "x":16.5, "y":0, "w":0.5}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[{", "x":11.5, "y":1}, + {"label":"]}", "x":12.5, "y":1}, + {"label":"\\|", "x":13.5, "y":1, "w":1.5}, + {"label":"Delete", "x":15, "y":1}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";:", "x":10.75, "y":2}, + {"label":"'\"", "x":11.75, "y":2}, + {"label":"Enter", "x":12.75, "y":2, "w":2.25}, + {"label":"PageUp", "x":15, "y":2}, + + {"label":"Shift1", "x":0, "y":3, "w":1.25}, + {"label":"Shift2", "x":1.25, "y":3}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",<", "x":9.25, "y":3}, + {"label":".>", "x":10.25, "y":3}, + {"label":"/?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"\u2191", "x":14, "y":3}, + {"label":"End", "x":15, "y":3}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"Win", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"label":"Space1", "x":3.75, "y":4, "w":2.25}, + {"label":"Space2", "x":6, "y":4, "w":1.25}, + {"label":"Space3", "x":7.25, "y":4, "w":2.75}, + {"label":"Alt", "x":10, "y":4, "w":1.25}, + {"label":"Fn", "x":11.25, "y":4, "w":1.25}, + {"label":"\u2190", "x":13, "y":4}, + {"label":"\u2193", "x":14, "y":4}, + {"label":"\u2192", "x":15, "y":4} ] }, "LAYOUT_65_ansi_blocker": { "layout": [ - { "label": "Esc", "x": 0, "y": 0 }, - { "label": "1", "x": 1, "y": 0 }, - { "label": "2", "x": 2, "y": 0 }, - { "label": "3", "x": 3, "y": 0 }, - { "label": "4", "x": 4, "y": 0 }, - { "label": "5", "x": 5, "y": 0 }, - { "label": "6", "x": 6, "y": 0 }, - { "label": "7", "x": 7, "y": 0 }, - { "label": "8", "x": 8, "y": 0 }, - { "label": "9", "x": 9, "y": 0 }, - { "label": "0", "x": 10, "y": 0 }, - { "label": "-", "x": 11, "y": 0 }, - { "label": "=", "x": 12, "y": 0 }, - { "label": "Backspace", "x": 13, "y": 0, "w": 2 }, - { "label": "Encode", "x": 15, "y": 0 }, - - { "label": "Tab", "x": 0, "y": 1, "w": 1.5 }, - { "label": "Q", "x": 1.5, "y": 1 }, - { "label": "W", "x": 2.5, "y": 1 }, - { "label": "E", "x": 3.5, "y": 1 }, - { "label": "R", "x": 4.5, "y": 1 }, - { "label": "T", "x": 5.5, "y": 1 }, - { "label": "Y", "x": 6.5, "y": 1 }, - { "label": "U", "x": 7.5, "y": 1 }, - { "label": "I", "x": 8.5, "y": 1 }, - { "label": "O", "x": 9.5, "y": 1 }, - { "label": "P", "x": 10.5, "y": 1 }, - { "label": "[", "x": 11.5, "y": 1 }, - { "label": "]", "x": 12.5, "y": 1 }, - { "label": "\\", "x": 13.5, "y": 1, "w": 1.5 }, - { "label": "Delete", "x": 15, "y": 1 }, - - { "label": "Caps Lock", "x": 0, "y": 2, "w": 1.75 }, - { "label": "A", "x": 1.75, "y": 2 }, - { "label": "S", "x": 2.75, "y": 2 }, - { "label": "D", "x": 3.75, "y": 2 }, - { "label": "F", "x": 4.75, "y": 2 }, - { "label": "G", "x": 5.75, "y": 2 }, - { "label": "H", "x": 6.75, "y": 2 }, - { "label": "J", "x": 7.75, "y": 2 }, - { "label": "K", "x": 8.75, "y": 2 }, - { "label": "L", "x": 9.75, "y": 2 }, - { "label": ";", "x": 10.75, "y": 2 }, - { "label": "'", "x": 11.75, "y": 2 }, - { "label": "Enter", "x": 12.75, "y": 2, "w": 2.25 }, - { "label": "PageUp", "x": 15, "y": 2 }, - - { "label": "Shift", "x": 0, "y": 3, "w": 2.25 }, - { "label": "Z", "x": 2.25, "y": 3 }, - { "label": "X", "x": 3.25, "y": 3 }, - { "label": "C", "x": 4.25, "y": 3 }, - { "label": "V", "x": 5.25, "y": 3 }, - { "label": "B", "x": 6.25, "y": 3 }, - { "label": "N", "x": 7.25, "y": 3 }, - { "label": "M", "x": 8.25, "y": 3 }, - { "label": ",", "x": 9.25, "y": 3 }, - { "label": ".", "x": 10.25, "y": 3 }, - { "label": "/", "x": 11.25, "y": 3 }, - { "label": "Shift", "x": 12.25, "y": 3, "w": 1.75 }, - { "label": "\u2191", "x": 14, "y": 3 }, - { "label": "End", "x": 15, "y": 3 }, - - { "label": "Ctrl", "x": 0, "y": 4, "w": 1.25 }, - { "label": "Win", "x": 1.25, "y": 4, "w": 1.25 }, - { "label": "Alt", "x": 2.5, "y": 4, "w": 1.25 }, - { "x": 3.75, "y": 4, "w": 6.25 }, - { "label": "Alt", "x": 10, "y": 4, "w": 1.25 }, - { "label": "Fn", "x": 11.25, "y": 4, "w": 1.25 }, - { "label": "\u2190", "x": 13, "y": 4 }, - { "label": "\u2193", "x": 14, "y": 4 }, - { "label": "\u2192", "x": 15, "y": 4 } + {"label":"Esc", "x":0, "y":0}, + {"label":"1!", "x":1, "y":0}, + {"label":"2@", "x":2, "y":0}, + {"label":"3#", "x":3, "y":0}, + {"label":"4$", "x":4, "y":0}, + {"label":"5%", "x":5, "y":0}, + {"label":"6^", "x":6, "y":0}, + {"label":"7&", "x":7, "y":0}, + {"label":"8*", "x":8, "y":0}, + {"label":"9(", "x":9, "y":0}, + {"label":"0)", "x":10, "y":0}, + {"label":"-_", "x":11, "y":0}, + {"label":"=+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0, "w":2}, + {"label":"Encode", "x":15, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[{", "x":11.5, "y":1}, + {"label":"]}", "x":12.5, "y":1}, + {"label":"\\|", "x":13.5, "y":1, "w":1.5}, + {"label":"Delete", "x":15, "y":1}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";:", "x":10.75, "y":2}, + {"label":"'\"", "x":11.75, "y":2}, + {"label":"Enter", "x":12.75, "y":2, "w":2.25}, + {"label":"PageUp", "x":15, "y":2}, + + {"label":"Shift", "x":0, "y":3, "w":2.25}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",<", "x":9.25, "y":3}, + {"label":".>", "x":10.25, "y":3}, + {"label":"/?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"\u2191", "x":14, "y":3}, + {"label":"End", "x":15, "y":3}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"Win", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"label":"Space", "x":3.75, "y":4, "w":6.25}, + {"label":"Alt", "x":10, "y":4, "w":1.25}, + {"label":"Fn", "x":11.25, "y":4, "w":1.25}, + {"label":"\u2190", "x":13, "y":4}, + {"label":"\u2193", "x":14, "y":4}, + {"label":"\u2192", "x":15, "y":4} ] }, "LAYOUT_65_iso_blocker": { "layout": [ - { "label": "Esc", "x": 0, "y": 0 }, - { "label": "1", "x": 1, "y": 0 }, - { "label": "2", "x": 2, "y": 0 }, - { "label": "3", "x": 3, "y": 0 }, - { "label": "4", "x": 4, "y": 0 }, - { "label": "5", "x": 5, "y": 0 }, - { "label": "6", "x": 6, "y": 0 }, - { "label": "7", "x": 7, "y": 0 }, - { "label": "8", "x": 8, "y": 0 }, - { "label": "9", "x": 9, "y": 0 }, - { "label": "0", "x": 10, "y": 0 }, - { "label": "-", "x": 11, "y": 0 }, - { "label": "=", "x": 12, "y": 0 }, - { "label": "Backspace", "x": 13, "y": 0, "w": 2 }, - { "label": "Encode", "x": 15, "y": 0 }, - - { "label": "Tab", "x": 0, "y": 1, "w": 1.5 }, - { "label": "Q", "x": 1.5, "y": 1 }, - { "label": "W", "x": 2.5, "y": 1 }, - { "label": "E", "x": 3.5, "y": 1 }, - { "label": "R", "x": 4.5, "y": 1 }, - { "label": "T", "x": 5.5, "y": 1 }, - { "label": "Y", "x": 6.5, "y": 1 }, - { "label": "U", "x": 7.5, "y": 1 }, - { "label": "I", "x": 8.5, "y": 1 }, - { "label": "O", "x": 9.5, "y": 1 }, - { "label": "P", "x": 10.5, "y": 1 }, - { "label": "[", "x": 11.5, "y": 1 }, - { "label": "]", "x": 12.5, "y": 1 }, - { "label": "ISO", "x": 13.75, "y": 1, "w": 1.25, "h": 2 }, - { "label": "Delete", "x": 15, "y": 1 }, - - { "label": "Caps Lock", "x": 0, "y": 2, "w": 1.75 }, - { "label": "A", "x": 1.75, "y": 2 }, - { "label": "S", "x": 2.75, "y": 2 }, - { "label": "D", "x": 3.75, "y": 2 }, - { "label": "F", "x": 4.75, "y": 2 }, - { "label": "G", "x": 5.75, "y": 2 }, - { "label": "H", "x": 6.75, "y": 2 }, - { "label": "J", "x": 7.75, "y": 2 }, - { "label": "K", "x": 8.75, "y": 2 }, - { "label": "L", "x": 9.75, "y": 2 }, - { "label": ";", "x": 10.75, "y": 2 }, - { "label": "'", "x": 11.75, "y": 2 }, - { "label": "\\", "x": 12.75, "y": 2 }, - { "label": "PageUp", "x": 15, "y": 2 }, - - { "label": "Shift", "x": 0, "y": 3, "w": 2.25 }, - { "label": "Z", "x": 2.25, "y": 3 }, - { "label": "X", "x": 3.25, "y": 3 }, - { "label": "C", "x": 4.25, "y": 3 }, - { "label": "V", "x": 5.25, "y": 3 }, - { "label": "B", "x": 6.25, "y": 3 }, - { "label": "N", "x": 7.25, "y": 3 }, - { "label": "M", "x": 8.25, "y": 3 }, - { "label": ",", "x": 9.25, "y": 3 }, - { "label": ".", "x": 10.25, "y": 3 }, - { "label": "/", "x": 11.25, "y": 3 }, - { "label": "Shift", "x": 12.25, "y": 3, "w": 1.75 }, - { "label": "\u2191", "x": 14, "y": 3 }, - { "label": "End", "x": 15, "y": 3 }, - - { "label": "Ctrl", "x": 0, "y": 4, "w": 1.25 }, - { "label": "Win", "x": 1.25, "y": 4, "w": 1.25 }, - { "label": "Alt", "x": 2.5, "y": 4, "w": 1.25 }, - { "x": 3.75, "y": 4, "w": 6.25 }, - { "label": "Alt", "x": 10, "y": 4, "w": 1.25 }, - { "label": "Fn", "x": 11.25, "y": 4, "w": 1.25 }, - { "label": "\u2190", "x": 13, "y": 4 }, - { "label": "\u2193", "x": 14, "y": 4 }, - { "label": "\u2192", "x": 15, "y": 4 } + {"label":"Esc", "x":0, "y":0}, + {"label":"1!", "x":1, "y":0}, + {"label":"2\"", "x":2, "y":0}, + {"label":"3\u00a3", "x":3, "y":0}, + {"label":"4$", "x":4, "y":0}, + {"label":"5%", "x":5, "y":0}, + {"label":"6^", "x":6, "y":0}, + {"label":"7&", "x":7, "y":0}, + {"label":"8*", "x":8, "y":0}, + {"label":"9(", "x":9, "y":0}, + {"label":"0)", "x":10, "y":0}, + {"label":"-_", "x":11, "y":0}, + {"label":"=+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0, "w":2}, + {"label":"Encode", "x":15, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[{", "x":11.5, "y":1}, + {"label":"]}", "x":12.5, "y":1}, + {"label":"Delete", "x":15, "y":1}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";:", "x":10.75, "y":2}, + {"label":"'@", "x":11.75, "y":2}, + {"label":"#~", "x":12.75, "y":2}, + {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, + {"label":"PageUp", "x":15, "y":2}, + + {"label":"Shift", "x":0, "y":3, "w":1.25}, + {"label":"\\|", "x":1.25, "y":3}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",<", "x":9.25, "y":3}, + {"label":".>", "x":10.25, "y":3}, + {"label":"/?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"\u2191", "x":14, "y":3}, + {"label":"End", "x":15, "y":3}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"Win", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"label":"Space", "x":3.75, "y":4, "w":6.25}, + {"label":"Alt", "x":10, "y":4, "w":1.25}, + {"label":"Fn", "x":11.25, "y":4, "w":1.25}, + {"label":"\u2190", "x":13, "y":4}, + {"label":"\u2193", "x":14, "y":4}, + {"label":"\u2192", "x":15, "y":4} + ] + }, + "LAYOUT_65_ansi_blocker_split_bs": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"1!", "x":1, "y":0}, + {"label":"2@", "x":2, "y":0}, + {"label":"3#", "x":3, "y":0}, + {"label":"4$", "x":4, "y":0}, + {"label":"5%", "x":5, "y":0}, + {"label":"6^", "x":6, "y":0}, + {"label":"7&", "x":7, "y":0}, + {"label":"8*", "x":8, "y":0}, + {"label":"9(", "x":9, "y":0}, + {"label":"0)", "x":10, "y":0}, + {"label":"-_", "x":11, "y":0}, + {"label":"=+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0}, + {"label":"Backspace", "x":14, "y":0}, + {"label":"Encode", "x":15, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[{", "x":11.5, "y":1}, + {"label":"]}", "x":12.5, "y":1}, + {"label":"\\|", "x":13.5, "y":1, "w":1.5}, + {"label":"Delete", "x":15, "y":1}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";:", "x":10.75, "y":2}, + {"label":"'\"", "x":11.75, "y":2}, + {"label":"Enter", "x":12.75, "y":2, "w":2.25}, + {"label":"PageUp", "x":15, "y":2}, + + {"label":"Shift", "x":0, "y":3, "w":2.25}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",<", "x":9.25, "y":3}, + {"label":".>", "x":10.25, "y":3}, + {"label":"/?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"\u2191", "x":14, "y":3}, + {"label":"End", "x":15, "y":3}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"Win", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"label":"Space", "x":3.75, "y":4, "w":6.25}, + {"label":"Alt", "x":10, "y":4, "w":1.25}, + {"label":"Fn", "x":11.25, "y":4, "w":1.25}, + {"label":"\u2190", "x":13, "y":4}, + {"label":"\u2193", "x":14, "y":4}, + {"label":"\u2192", "x":15, "y":4} + ] + }, + "LAYOUT_65_iso_blocker_split_bs": { + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"1!", "x":1, "y":0}, + {"label":"2\"", "x":2, "y":0}, + {"label":"3\u00a3", "x":3, "y":0}, + {"label":"4$", "x":4, "y":0}, + {"label":"5%", "x":5, "y":0}, + {"label":"6^", "x":6, "y":0}, + {"label":"7&", "x":7, "y":0}, + {"label":"8*", "x":8, "y":0}, + {"label":"9(", "x":9, "y":0}, + {"label":"0)", "x":10, "y":0}, + {"label":"-_", "x":11, "y":0}, + {"label":"=+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0}, + {"label":"Backspace", "x":14, "y":0}, + {"label":"Encode", "x":15, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[{", "x":11.5, "y":1}, + {"label":"]}", "x":12.5, "y":1}, + {"label":"Delete", "x":15, "y":1}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";:", "x":10.75, "y":2}, + {"label":"'@", "x":11.75, "y":2}, + {"label":"#~", "x":12.75, "y":2}, + {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, + {"label":"PageUp", "x":15, "y":2}, + + {"label":"Shift", "x":0, "y":3, "w":1.25}, + {"label":"\\|", "x":1.25, "y":3}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",<", "x":9.25, "y":3}, + {"label":".>", "x":10.25, "y":3}, + {"label":"/?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"\u2191", "x":14, "y":3}, + {"label":"End", "x":15, "y":3}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"Win", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"label":"Space", "x":3.75, "y":4, "w":6.25}, + {"label":"Alt", "x":10, "y":4, "w":1.25}, + {"label":"Fn", "x":11.25, "y":4, "w":1.25}, + {"label":"\u2190", "x":13, "y":4}, + {"label":"\u2193", "x":14, "y":4}, + {"label":"\u2192", "x":15, "y":4} ] }, - "LAYOUT_65_ansi_split_bs": { + "LAYOUT_65_ansi_blocker_split_lshift": { "layout": [ - { "label": "Esc", "x": 0, "y": 0 }, - { "label": "1", "x": 1, "y": 0 }, - { "label": "2", "x": 2, "y": 0 }, - { "label": "3", "x": 3, "y": 0 }, - { "label": "4", "x": 4, "y": 0 }, - { "label": "5", "x": 5, "y": 0 }, - { "label": "6", "x": 6, "y": 0 }, - { "label": "7", "x": 7, "y": 0 }, - { "label": "8", "x": 8, "y": 0 }, - { "label": "9", "x": 9, "y": 0 }, - { "label": "0", "x": 10, "y": 0 }, - { "label": "-", "x": 11, "y": 0 }, - { "label": "=", "x": 12, "y": 0 }, - { "label": "Backspace", "x": 13, "y": 0 }, - { "label": "Encode", "x": 15, "y": 0 }, - - { "label": "Tab", "x": 0, "y": 1, "w": 1.5 }, - { "label": "Q", "x": 1.5, "y": 1 }, - { "label": "W", "x": 2.5, "y": 1 }, - { "label": "E", "x": 3.5, "y": 1 }, - { "label": "R", "x": 4.5, "y": 1 }, - { "label": "T", "x": 5.5, "y": 1 }, - { "label": "Y", "x": 6.5, "y": 1 }, - { "label": "U", "x": 7.5, "y": 1 }, - { "label": "I", "x": 8.5, "y": 1 }, - { "label": "O", "x": 9.5, "y": 1 }, - { "label": "P", "x": 10.5, "y": 1 }, - { "label": "[", "x": 11.5, "y": 1 }, - { "label": "]", "x": 12.5, "y": 1 }, - { "label": "\\", "x": 13.5, "y": 1, "w": 1.5 }, - { "label": "Delete", "x": 15, "y": 1 }, - - { "label": "Caps Lock", "x": 0, "y": 2, "w": 1.75 }, - { "label": "A", "x": 1.75, "y": 2 }, - { "label": "S", "x": 2.75, "y": 2 }, - { "label": "D", "x": 3.75, "y": 2 }, - { "label": "F", "x": 4.75, "y": 2 }, - { "label": "G", "x": 5.75, "y": 2 }, - { "label": "H", "x": 6.75, "y": 2 }, - { "label": "J", "x": 7.75, "y": 2 }, - { "label": "K", "x": 8.75, "y": 2 }, - { "label": "L", "x": 9.75, "y": 2 }, - { "label": ";", "x": 10.75, "y": 2 }, - { "label": "'", "x": 11.75, "y": 2 }, - { "label": "Enter", "x": 12.75, "y": 2, "w": 2.25 }, - { "label": "Backspace", "x": 14, "y": 0 }, - { "label": "PageUp", "x": 15, "y": 2 }, - - { "label": "Shift", "x": 0, "y": 3, "w": 2.25 }, - { "label": "Z", "x": 2.25, "y": 3 }, - { "label": "X", "x": 3.25, "y": 3 }, - { "label": "C", "x": 4.25, "y": 3 }, - { "label": "V", "x": 5.25, "y": 3 }, - { "label": "B", "x": 6.25, "y": 3 }, - { "label": "N", "x": 7.25, "y": 3 }, - { "label": "M", "x": 8.25, "y": 3 }, - { "label": ",", "x": 9.25, "y": 3 }, - { "label": ".", "x": 10.25, "y": 3 }, - { "label": "/", "x": 11.25, "y": 3 }, - { "label": "Shift", "x": 12.25, "y": 3, "w": 1.75 }, - { "label": "\u2191", "x": 14, "y": 3 }, - { "label": "End", "x": 15, "y": 3 }, - - { "label": "Ctrl", "x": 0, "y": 4, "w": 1.25 }, - { "label": "Win", "x": 1.25, "y": 4, "w": 1.25 }, - { "label": "Alt", "x": 2.5, "y": 4, "w": 1.25 }, - { "x": 3.75, "y": 4, "w": 6.25 }, - { "label": "Alt", "x": 10, "y": 4, "w": 1.25 }, - { "label": "Fn", "x": 11.25, "y": 4, "w": 1.25 }, - { "label": "\u2190", "x": 13, "y": 4 }, - { "label": "\u2193", "x": 14, "y": 4 }, - { "label": "\u2192", "x": 15, "y": 4 } + {"label":"Esc", "x":0, "y":0}, + {"label":"1!", "x":1, "y":0}, + {"label":"2@", "x":2, "y":0}, + {"label":"3#", "x":3, "y":0}, + {"label":"4$", "x":4, "y":0}, + {"label":"5%", "x":5, "y":0}, + {"label":"6^", "x":6, "y":0}, + {"label":"7&", "x":7, "y":0}, + {"label":"8*", "x":8, "y":0}, + {"label":"9(", "x":9, "y":0}, + {"label":"0)", "x":10, "y":0}, + {"label":"-_", "x":11, "y":0}, + {"label":"=+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0, "w":2}, + {"label":"Encode", "x":15, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[{", "x":11.5, "y":1}, + {"label":"]}", "x":12.5, "y":1}, + {"label":"\\|", "x":13.5, "y":1, "w":1.5}, + {"label":"Delete", "x":15, "y":1}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";:", "x":10.75, "y":2}, + {"label":"'\"", "x":11.75, "y":2}, + {"label":"Enter", "x":12.75, "y":2, "w":2.25}, + {"label":"PageUp", "x":15, "y":2}, + + {"label":"Shift1", "x":0, "y":3, "w":1.25}, + {"label":"Shift2", "x":1.25, "y":3}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",<", "x":9.25, "y":3}, + {"label":".>", "x":10.25, "y":3}, + {"label":"/?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"\u2191", "x":14, "y":3}, + {"label":"End", "x":15, "y":3}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"Win", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"label":"Space", "x":3.75, "y":4, "w":6.25}, + {"label":"Alt", "x":10, "y":4, "w":1.25}, + {"label":"Fn", "x":11.25, "y":4, "w":1.25}, + {"label":"\u2190", "x":13, "y":4}, + {"label":"\u2193", "x":14, "y":4}, + {"label":"\u2192", "x":15, "y":4} ] }, - "LAYOUT_65_ansi_split_lshift": { + "LAYOUT_65_ansi_blocker_split_space": { "layout": [ - { "label": "Esc", "x": 0, "y": 0 }, - { "label": "1", "x": 1, "y": 0 }, - { "label": "2", "x": 2, "y": 0 }, - { "label": "3", "x": 3, "y": 0 }, - { "label": "4", "x": 4, "y": 0 }, - { "label": "5", "x": 5, "y": 0 }, - { "label": "6", "x": 6, "y": 0 }, - { "label": "7", "x": 7, "y": 0 }, - { "label": "8", "x": 8, "y": 0 }, - { "label": "9", "x": 9, "y": 0 }, - { "label": "0", "x": 10, "y": 0 }, - { "label": "-", "x": 11, "y": 0 }, - { "label": "=", "x": 12, "y": 0 }, - { "label": "Backspace", "x": 13, "y": 0, "w": 2 }, - { "label": "Encode", "x": 15, "y": 0 }, - - { "label": "Tab", "x": 0, "y": 1, "w": 1.5 }, - { "label": "Q", "x": 1.5, "y": 1 }, - { "label": "W", "x": 2.5, "y": 1 }, - { "label": "E", "x": 3.5, "y": 1 }, - { "label": "R", "x": 4.5, "y": 1 }, - { "label": "T", "x": 5.5, "y": 1 }, - { "label": "Y", "x": 6.5, "y": 1 }, - { "label": "U", "x": 7.5, "y": 1 }, - { "label": "I", "x": 8.5, "y": 1 }, - { "label": "O", "x": 9.5, "y": 1 }, - { "label": "P", "x": 10.5, "y": 1 }, - { "label": "[", "x": 11.5, "y": 1 }, - { "label": "]", "x": 12.5, "y": 1 }, - { "label": "\\", "x": 13.5, "y": 1, "w": 1.5 }, - { "label": "Delete", "x": 15, "y": 1 }, - - { "label": "Caps Lock", "x": 0, "y": 2, "w": 1.75 }, - { "label": "A", "x": 1.75, "y": 2 }, - { "label": "S", "x": 2.75, "y": 2 }, - { "label": "D", "x": 3.75, "y": 2 }, - { "label": "F", "x": 4.75, "y": 2 }, - { "label": "G", "x": 5.75, "y": 2 }, - { "label": "H", "x": 6.75, "y": 2 }, - { "label": "J", "x": 7.75, "y": 2 }, - { "label": "K", "x": 8.75, "y": 2 }, - { "label": "L", "x": 9.75, "y": 2 }, - { "label": ";", "x": 10.75, "y": 2 }, - { "label": "'", "x": 11.75, "y": 2 }, - { "label": "Enter", "x": 12.75, "y": 2, "w": 2.25 }, - { "label": "PageUp", "x": 15, "y": 2 }, - - { "label": "Shift1", "x": 0, "y": 3, "w": 1.25 }, - { "label": "Shift2", "x": 1.25, "y": 3 }, - { "label": "Z", "x": 2.25, "y": 3 }, - { "label": "X", "x": 3.25, "y": 3 }, - { "label": "C", "x": 4.25, "y": 3 }, - { "label": "V", "x": 5.25, "y": 3 }, - { "label": "B", "x": 6.25, "y": 3 }, - { "label": "N", "x": 7.25, "y": 3 }, - { "label": "M", "x": 8.25, "y": 3 }, - { "label": ",", "x": 9.25, "y": 3 }, - { "label": ".", "x": 10.25, "y": 3 }, - { "label": "/", "x": 11.25, "y": 3 }, - { "label": "Shift", "x": 12.25, "y": 3, "w": 1.75 }, - { "label": "\u2191", "x": 14, "y": 3 }, - { "label": "End", "x": 15, "y": 3 }, - - { "label": "Ctrl", "x": 0, "y": 4, "w": 1.25 }, - { "label": "Win", "x": 1.25, "y": 4, "w": 1.25 }, - { "label": "Alt", "x": 2.5, "y": 4, "w": 1.25 }, - { "x": 3.75, "y": 4, "w": 6.25 }, - { "label": "Alt", "x": 10, "y": 4, "w": 1.25 }, - { "label": "Fn", "x": 11.25, "y": 4, "w": 1.25 }, - { "label": "\u2190", "x": 13, "y": 4 }, - { "label": "\u2193", "x": 14, "y": 4 }, - { "label": "\u2192", "x": 15, "y": 4 } + {"label":"Esc", "x":0, "y":0}, + {"label":"1!", "x":1, "y":0}, + {"label":"2@", "x":2, "y":0}, + {"label":"3#", "x":3, "y":0}, + {"label":"4$", "x":4, "y":0}, + {"label":"5%", "x":5, "y":0}, + {"label":"6^", "x":6, "y":0}, + {"label":"7&", "x":7, "y":0}, + {"label":"8*", "x":8, "y":0}, + {"label":"9(", "x":9, "y":0}, + {"label":"0)", "x":10, "y":0}, + {"label":"-_", "x":11, "y":0}, + {"label":"=+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0, "w":2}, + {"label":"Encode", "x":15, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[{", "x":11.5, "y":1}, + {"label":"]}", "x":12.5, "y":1}, + {"label":"\\|", "x":13.5, "y":1, "w":1.5}, + {"label":"Delete", "x":15, "y":1}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";:", "x":10.75, "y":2}, + {"label":"'\"", "x":11.75, "y":2}, + {"label":"Enter", "x":12.75, "y":2, "w":2.25}, + {"label":"PageUp", "x":15, "y":2}, + + {"label":"Shift", "x":0, "y":3, "w":2.25}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",<", "x":9.25, "y":3}, + {"label":".>", "x":10.25, "y":3}, + {"label":"/?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"\u2191", "x":14, "y":3}, + {"label":"End", "x":15, "y":3}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"Win", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"label":"Space1", "x":3.75, "y":4, "w":2.25}, + {"label":"Space2", "x":6, "y":4, "w":1.25}, + {"label":"Space3", "x":7.25, "y":4, "w":2.75}, + {"label":"Alt", "x":10, "y":4, "w":1.25}, + {"label":"Fn", "x":11.25, "y":4, "w":1.25}, + {"label":"\u2190", "x":13, "y":4}, + {"label":"\u2193", "x":14, "y":4}, + {"label":"\u2192", "x":15, "y":4} ] }, - "LAYOUT_65_split_space": { + "LAYOUT_65_iso_blocker_split_space": { "layout": [ - { "label": "Esc", "x": 0, "y": 0 }, - { "label": "1", "x": 1, "y": 0 }, - { "label": "2", "x": 2, "y": 0 }, - { "label": "3", "x": 3, "y": 0 }, - { "label": "4", "x": 4, "y": 0 }, - { "label": "5", "x": 5, "y": 0 }, - { "label": "6", "x": 6, "y": 0 }, - { "label": "7", "x": 7, "y": 0 }, - { "label": "8", "x": 8, "y": 0 }, - { "label": "9", "x": 9, "y": 0 }, - { "label": "0", "x": 10, "y": 0 }, - { "label": "-", "x": 11, "y": 0 }, - { "label": "=", "x": 12, "y": 0 }, - { "label": "Backspace", "x": 13, "y": 0, "w": 2 }, - { "label": "Encode", "x": 15, "y": 0 }, - - { "label": "Tab", "x": 0, "y": 1, "w": 1.5 }, - { "label": "Q", "x": 1.5, "y": 1 }, - { "label": "W", "x": 2.5, "y": 1 }, - { "label": "E", "x": 3.5, "y": 1 }, - { "label": "R", "x": 4.5, "y": 1 }, - { "label": "T", "x": 5.5, "y": 1 }, - { "label": "Y", "x": 6.5, "y": 1 }, - { "label": "U", "x": 7.5, "y": 1 }, - { "label": "I", "x": 8.5, "y": 1 }, - { "label": "O", "x": 9.5, "y": 1 }, - { "label": "P", "x": 10.5, "y": 1 }, - { "label": "[", "x": 11.5, "y": 1 }, - { "label": "]", "x": 12.5, "y": 1 }, - { "label": "\\", "x": 13.5, "y": 1, "w": 1.5 }, - { "label": "Delete", "x": 15, "y": 1 }, - - { "label": "Caps Lock", "x": 0, "y": 2, "w": 1.75 }, - { "label": "A", "x": 1.75, "y": 2 }, - { "label": "S", "x": 2.75, "y": 2 }, - { "label": "D", "x": 3.75, "y": 2 }, - { "label": "F", "x": 4.75, "y": 2 }, - { "label": "G", "x": 5.75, "y": 2 }, - { "label": "H", "x": 6.75, "y": 2 }, - { "label": "J", "x": 7.75, "y": 2 }, - { "label": "K", "x": 8.75, "y": 2 }, - { "label": "L", "x": 9.75, "y": 2 }, - { "label": ";", "x": 10.75, "y": 2 }, - { "label": "'", "x": 11.75, "y": 2 }, - { "label": "Enter", "x": 12.75, "y": 2, "w": 2.25 }, - { "label": "PageUp", "x": 15, "y": 2 }, - - { "label": "Shift", "x": 0, "y": 3, "w": 2.25 }, - { "label": "Z", "x": 2.25, "y": 3 }, - { "label": "X", "x": 3.25, "y": 3 }, - { "label": "C", "x": 4.25, "y": 3 }, - { "label": "V", "x": 5.25, "y": 3 }, - { "label": "B", "x": 6.25, "y": 3 }, - { "label": "N", "x": 7.25, "y": 3 }, - { "label": "M", "x": 8.25, "y": 3 }, - { "label": ",", "x": 9.25, "y": 3 }, - { "label": ".", "x": 10.25, "y": 3 }, - { "label": "/", "x": 11.25, "y": 3 }, - { "label": "Shift", "x": 12.25, "y": 3, "w": 1.75 }, - { "label": "\u2191", "x": 14, "y": 3 }, - { "label": "End", "x": 15, "y": 3 }, - - { "label": "Ctrl", "x": 0, "y": 4, "w": 1.25 }, - { "label": "Win", "x": 1.25, "y": 4, "w": 1.25 }, - { "label": "Alt", "x": 2.5, "y": 4, "w": 1.25 }, - { "x": 3.75, "y": 4, "w": 2.25 }, - { "x": 6, "y": 4, "w": 1.25 }, - { "x": 7.25, "y": 4, "w": 2.75 }, - { "label": "Alt", "x": 10, "y": 4, "w": 1.25 }, - { "label": "Fn", "x": 11.25, "y": 4, "w": 1.25 }, - { "label": "\u2190", "x": 13, "y": 4 }, - { "label": "\u2193", "x": 14, "y": 4 }, - { "label": "\u2192", "x": 15, "y": 4 } + {"label":"Esc", "x":0, "y":0}, + {"label":"1!", "x":1, "y":0}, + {"label":"2\"", "x":2, "y":0}, + {"label":"3\u00a3", "x":3, "y":0}, + {"label":"4$", "x":4, "y":0}, + {"label":"5%", "x":5, "y":0}, + {"label":"6^", "x":6, "y":0}, + {"label":"7&", "x":7, "y":0}, + {"label":"8*", "x":8, "y":0}, + {"label":"9(", "x":9, "y":0}, + {"label":"0)", "x":10, "y":0}, + {"label":"-_", "x":11, "y":0}, + {"label":"=+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0, "w":2}, + {"label":"Encode", "x":15, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[{", "x":11.5, "y":1}, + {"label":"]}", "x":12.5, "y":1}, + {"label":"Delete", "x":15, "y":1}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";:", "x":10.75, "y":2}, + {"label":"'@", "x":11.75, "y":2}, + {"label":"#~", "x":12.75, "y":2}, + {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, + {"label":"PageUp", "x":15, "y":2}, + + {"label":"Shift", "x":0, "y":3, "w":1.25}, + {"label":"\\|", "x":1.25, "y":3}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",<", "x":9.25, "y":3}, + {"label":".>", "x":10.25, "y":3}, + {"label":"/?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"\u2191", "x":14, "y":3}, + {"label":"End", "x":15, "y":3}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"Win", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"label":"Space1", "x":3.75, "y":4, "w":2.25}, + {"label":"Space2", "x":6, "y":4, "w":1.25}, + {"label":"Space3", "x":7.25, "y":4, "w":2.75}, + {"label":"Alt", "x":10, "y":4, "w":1.25}, + {"label":"Fn", "x":11.25, "y":4, "w":1.25}, + {"label":"\u2190", "x":13, "y":4}, + {"label":"\u2193", "x":14, "y":4}, + {"label":"\u2192", "x":15, "y":4} ] } } diff --git a/keyboards/meletrix/zoom65/keymaps/65_ansi/keymap.c b/keyboards/meletrix/zoom65/keymaps/65_ansi_blocker/keymap.c similarity index 100% rename from keyboards/meletrix/zoom65/keymaps/65_ansi/keymap.c rename to keyboards/meletrix/zoom65/keymaps/65_ansi_blocker/keymap.c diff --git a/keyboards/meletrix/zoom65/keymaps/65_ansi/readme.md b/keyboards/meletrix/zoom65/keymaps/65_ansi_blocker/readme.md similarity index 100% rename from keyboards/meletrix/zoom65/keymaps/65_ansi/readme.md rename to keyboards/meletrix/zoom65/keymaps/65_ansi_blocker/readme.md diff --git a/keyboards/meletrix/zoom65/keymaps/65_split_bs/keymap.c b/keyboards/meletrix/zoom65/keymaps/65_ansi_blocker_split_bs/keymap.c similarity index 82% rename from keyboards/meletrix/zoom65/keymaps/65_split_bs/keymap.c rename to keyboards/meletrix/zoom65/keymaps/65_ansi_blocker_split_bs/keymap.c index a930987720..7580e22f95 100644 --- a/keyboards/meletrix/zoom65/keymaps/65_split_bs/keymap.c +++ b/keyboards/meletrix/zoom65/keymaps/65_ansi_blocker_split_bs/keymap.c @@ -17,18 +17,18 @@ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_65_ansi_split_bs( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_MUTE, + [0] = LAYOUT_65_ansi_blocker_split_bs( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_MUTE, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_BSPC, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT ), - [1] = LAYOUT_65_ansi_split_bs( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_MPLY, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + [1] = LAYOUT_65_ansi_blocker_split_bs( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, KC_MPLY, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, - _______, _______, _______, _______, _______, _______, _______, _______, _______ + _______, _______, _______, _______, _______, _______, _______, _______, _______ ), }; diff --git a/keyboards/meletrix/zoom65/keymaps/65_ansi_blocker_split_bs/readme.md b/keyboards/meletrix/zoom65/keymaps/65_ansi_blocker_split_bs/readme.md new file mode 100644 index 0000000000..768bda7b6d --- /dev/null +++ b/keyboards/meletrix/zoom65/keymaps/65_ansi_blocker_split_bs/readme.md @@ -0,0 +1 @@ +# The 65_ansi_blocker_split_bs keymap for zoom65 diff --git a/keyboards/meletrix/zoom65/keymaps/65_split_lshift/keymap.c b/keyboards/meletrix/zoom65/keymaps/65_ansi_blocker_split_lshift/keymap.c similarity index 80% rename from keyboards/meletrix/zoom65/keymaps/65_split_lshift/keymap.c rename to keyboards/meletrix/zoom65/keymaps/65_ansi_blocker_split_lshift/keymap.c index 91c9179516..29bf8fb543 100644 --- a/keyboards/meletrix/zoom65/keymaps/65_split_lshift/keymap.c +++ b/keyboards/meletrix/zoom65/keymaps/65_ansi_blocker_split_lshift/keymap.c @@ -17,18 +17,18 @@ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_65_ansi_split_lshift( + [0] = LAYOUT_65_ansi_blocker_split_lshift( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_MUTE, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, - KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT ), - [1] = LAYOUT_65_ansi_split_lshift( + [1] = LAYOUT_65_ansi_blocker_split_lshift( KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_MPLY, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, - _______, _______, _______, _______, _______, _______, _______, _______, _______ + _______, _______, _______, _______, _______, _______, _______, _______, _______ ), }; diff --git a/keyboards/meletrix/zoom65/keymaps/65_ansi_blocker_split_lshift/readme.md b/keyboards/meletrix/zoom65/keymaps/65_ansi_blocker_split_lshift/readme.md new file mode 100644 index 0000000000..5d3bfbcd17 --- /dev/null +++ b/keyboards/meletrix/zoom65/keymaps/65_ansi_blocker_split_lshift/readme.md @@ -0,0 +1 @@ +# The 65_ansi_blocker_split_lshift keymap for zoom65 diff --git a/keyboards/meletrix/zoom65/keymaps/65_split_space/keymap.c b/keyboards/meletrix/zoom65/keymaps/65_ansi_blocker_split_space/keymap.c similarity index 78% rename from keyboards/meletrix/zoom65/keymaps/65_split_space/keymap.c rename to keyboards/meletrix/zoom65/keymaps/65_ansi_blocker_split_space/keymap.c index b63aff9a9e..9ab31d62f7 100644 --- a/keyboards/meletrix/zoom65/keymaps/65_split_space/keymap.c +++ b/keyboards/meletrix/zoom65/keymaps/65_ansi_blocker_split_space/keymap.c @@ -17,18 +17,18 @@ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT_65_split_space( + [0] = LAYOUT_65_ansi_blocker_split_space( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_MUTE, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT ), - [1] = LAYOUT_65_split_space( + [1] = LAYOUT_65_ansi_blocker_split_space( KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_MPLY, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), }; diff --git a/keyboards/meletrix/zoom65/keymaps/65_ansi_blocker_split_space/readme.md b/keyboards/meletrix/zoom65/keymaps/65_ansi_blocker_split_space/readme.md new file mode 100644 index 0000000000..85d4e776cf --- /dev/null +++ b/keyboards/meletrix/zoom65/keymaps/65_ansi_blocker_split_space/readme.md @@ -0,0 +1 @@ +# The 65_ansi_blocker_split_space keymap for zoom65 diff --git a/keyboards/meletrix/zoom65/keymaps/65_iso/readme.md b/keyboards/meletrix/zoom65/keymaps/65_iso/readme.md deleted file mode 100644 index fd70c95050..0000000000 --- a/keyboards/meletrix/zoom65/keymaps/65_iso/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The 65_iso_blocker for zoom65 diff --git a/keyboards/meletrix/zoom65/keymaps/65_iso/keymap.c b/keyboards/meletrix/zoom65/keymaps/65_iso_blocker/keymap.c similarity index 81% rename from keyboards/meletrix/zoom65/keymaps/65_iso/keymap.c rename to keyboards/meletrix/zoom65/keymaps/65_iso_blocker/keymap.c index ccdfb6fc2f..cc7967446d 100644 --- a/keyboards/meletrix/zoom65/keymaps/65_iso/keymap.c +++ b/keyboards/meletrix/zoom65/keymaps/65_iso_blocker/keymap.c @@ -19,16 +19,16 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_65_iso_blocker( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_MUTE, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_ENT, KC_DEL, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_BSLS, KC_PGUP, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_PGUP, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT ), [1] = LAYOUT_65_iso_blocker( KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_MPLY, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, - _______, _______, _______, _______, _______, _______, _______, _______, _______ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, + _______, _______, _______, _______, _______, _______, _______, _______, _______ ), }; diff --git a/keyboards/meletrix/zoom65/keymaps/65_iso_blocker/readme.md b/keyboards/meletrix/zoom65/keymaps/65_iso_blocker/readme.md new file mode 100644 index 0000000000..46af22fcd9 --- /dev/null +++ b/keyboards/meletrix/zoom65/keymaps/65_iso_blocker/readme.md @@ -0,0 +1 @@ +# The 65_iso_blocker keymap for zoom65 diff --git a/keyboards/meletrix/zoom65/keymaps/65_iso_blocker_split_bs/keymap.c b/keyboards/meletrix/zoom65/keymaps/65_iso_blocker_split_bs/keymap.c new file mode 100644 index 0000000000..af549a744b --- /dev/null +++ b/keyboards/meletrix/zoom65/keymaps/65_iso_blocker_split_bs/keymap.c @@ -0,0 +1,34 @@ +/* Copyright 2021 meletrix, James Young for QMK (@noroadsleft) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_65_iso_blocker_split_bs( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_MUTE, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_PGUP, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_65_iso_blocker_split_bs( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, KC_MPLY, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; diff --git a/keyboards/meletrix/zoom65/keymaps/65_iso_blocker_split_bs/readme.md b/keyboards/meletrix/zoom65/keymaps/65_iso_blocker_split_bs/readme.md new file mode 100644 index 0000000000..873c51652a --- /dev/null +++ b/keyboards/meletrix/zoom65/keymaps/65_iso_blocker_split_bs/readme.md @@ -0,0 +1 @@ +# The 65_iso_blocker_split_bs keymap for zoom65 diff --git a/keyboards/meletrix/zoom65/keymaps/65_iso_blocker_split_space/keymap.c b/keyboards/meletrix/zoom65/keymaps/65_iso_blocker_split_space/keymap.c new file mode 100644 index 0000000000..7ab65bbf2d --- /dev/null +++ b/keyboards/meletrix/zoom65/keymaps/65_iso_blocker_split_space/keymap.c @@ -0,0 +1,34 @@ +/* Copyright 2021 meletrix, James Young for QMK (@noroadsleft) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_65_iso_blocker_split_space( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_MUTE, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_PGUP, + KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + ), + [1] = LAYOUT_65_iso_blocker_split_space( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_MPLY, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), +}; diff --git a/keyboards/meletrix/zoom65/keymaps/65_iso_blocker_split_space/readme.md b/keyboards/meletrix/zoom65/keymaps/65_iso_blocker_split_space/readme.md new file mode 100644 index 0000000000..a9c715e796 --- /dev/null +++ b/keyboards/meletrix/zoom65/keymaps/65_iso_blocker_split_space/readme.md @@ -0,0 +1 @@ +# The 65_iso_blocker_split_space keymap for zoom65 diff --git a/keyboards/meletrix/zoom65/keymaps/65_split_bs/readme.md b/keyboards/meletrix/zoom65/keymaps/65_split_bs/readme.md deleted file mode 100644 index 34c59ba014..0000000000 --- a/keyboards/meletrix/zoom65/keymaps/65_split_bs/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The 65_split_bs keymap for zoom65 diff --git a/keyboards/meletrix/zoom65/keymaps/65_split_lshift/readme.md b/keyboards/meletrix/zoom65/keymaps/65_split_lshift/readme.md deleted file mode 100644 index e56989b24a..0000000000 --- a/keyboards/meletrix/zoom65/keymaps/65_split_lshift/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The 65_split_lshift keymap for zoom65 diff --git a/keyboards/meletrix/zoom65/keymaps/65_split_space/readme.md b/keyboards/meletrix/zoom65/keymaps/65_split_space/readme.md deleted file mode 100644 index 4bd0ee67db..0000000000 --- a/keyboards/meletrix/zoom65/keymaps/65_split_space/readme.md +++ /dev/null @@ -1 +0,0 @@ -# The 65_split_space keymap for zoom65 diff --git a/keyboards/meletrix/zoom65/keymaps/default/keymap.c b/keyboards/meletrix/zoom65/keymaps/default/keymap.c index a0a62d2967..dfcad3107e 100644 --- a/keyboards/meletrix/zoom65/keymaps/default/keymap.c +++ b/keyboards/meletrix/zoom65/keymaps/default/keymap.c @@ -18,17 +18,17 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_all( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_VOLD, KC_MUTE, KC_VOLU, + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_VOLD, KC_MUTE, KC_VOLU, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_BSPC, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT ), [1] = LAYOUT_all( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_MPRV, KC_MPLY, KC_MNXT, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), }; diff --git a/keyboards/meletrix/zoom65/keymaps/via/keymap.c b/keyboards/meletrix/zoom65/keymaps/via/keymap.c index f703822906..0bd3004a12 100644 --- a/keyboards/meletrix/zoom65/keymaps/via/keymap.c +++ b/keyboards/meletrix/zoom65/keymaps/via/keymap.c @@ -18,31 +18,31 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT_all( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_VOLD, KC_MUTE, KC_VOLU, + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_BSPC, KC_VOLD, KC_MUTE, KC_VOLU, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_BSPC, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, KC_LSFT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT ), [1] = LAYOUT_all( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_MPRV, KC_MPLY, KC_MNXT, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), [2] = LAYOUT_all( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), [3] = LAYOUT_all( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), }; diff --git a/keyboards/meletrix/zoom65/readme.md b/keyboards/meletrix/zoom65/readme.md index dc56f69949..5d9ba30698 100644 --- a/keyboards/meletrix/zoom65/readme.md +++ b/keyboards/meletrix/zoom65/readme.md @@ -1,14 +1,14 @@ # zoom65 -![zoom65](https://i.imgur.com/NIbreqdh.jpeg) +![zoom65](https://i.imgur.com/NIbreqdh.jpeg) -Meletrix's first mass-produced mechanical keyboard. +Meletrix's first mass-produced mechanical keyboard. More Info at [zoom](https://zoom65.com/). -​ + * Keyboard Maintainer: [spbgzh](https://github.com/spbgzh) * Hardware Supported: zoom65 Standard -* Hardware Availability: [zoom](https://zoom65.com/) -​ +* Hardware Availability: [zoom](https://zoom65.com/) + Make example for this keyboard (after setting up your build environment): make meletrix/zoom65:default diff --git a/keyboards/meletrix/zoom65/rules.mk b/keyboards/meletrix/zoom65/rules.mk index b481714b72..4ae48737a4 100644 --- a/keyboards/meletrix/zoom65/rules.mk +++ b/keyboards/meletrix/zoom65/rules.mk @@ -21,4 +21,4 @@ RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output ENCODER_ENABLE = yes # Enable Encoder -LAYOUT = 65_ansi_blocker 65_iso_blocker +LAYOUTS = 65_ansi_blocker 65_iso_blocker 65_ansi_blocker_split_bs 65_iso_blocker_split_bs diff --git a/keyboards/meletrix/zoom65/zoom65.h b/keyboards/meletrix/zoom65/zoom65.h index 400fdcbf3b..81948ba1da 100644 --- a/keyboards/meletrix/zoom65/zoom65.h +++ b/keyboards/meletrix/zoom65/zoom65.h @@ -33,11 +33,11 @@ * └────┴────┴────┴────────┴────┴──────────┴────┴────┘ └───┴───┴───┘ */ #define LAYOUT_all( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K43, K0E, K45, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ - K40, K41, K42, K44, K46, K48, K4A, K4B, K4C, K4D, K4E \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D, K43, K0E, K45, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2E, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K44, K46, K48, K4A, K4B, K4C, K4D, K4E \ ) { \ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ @@ -82,28 +82,28 @@ * │10 │11 │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │1e │ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ ├───┤ * │20 │21 │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │ │2e │ - * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┼───┤ - * │30 │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3c │3d │3e │ - * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤ + * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┼───┤ + * │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3c │3d │3e │ + * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤ * │40 │41 │42 │46 │4a │4b │ │4c │4d │4e │ * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘ */ #define LAYOUT_65_iso_blocker( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2E, \ - K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ - K40, K41, K42, K46, K4A, K4B, K4C, K4D, K4E \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K1D, K2E, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K46, K4A, K4B, K4C, K4D, K4E \ ) { \ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, KC_NO, K2E }, \ - { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, K4E }, \ } -/* LAYOUT_65_ansi_split_bs +/* LAYOUT_65_ansi_blocker_split_bs * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0d │2d │ ◯ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┐ @@ -116,12 +116,12 @@ * │40 │41 │42 │46 │4a │4b │ │4c │4d │4e │ * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘ */ -#define LAYOUT_65_ansi_split_bs( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, \ - K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ - K40, K41, K42, K46, K4A, K4B, K4C, K4D, K4E \ +#define LAYOUT_65_ansi_blocker_split_bs( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2E, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K46, K4A, K4B, K4C, K4D, K4E \ ) { \ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ @@ -131,7 +131,35 @@ } -/* LAYOUT_65_ansi_split_lshift +/* LAYOUT_65_iso_blocker_split_bs + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ + * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0d │2d │ ◯ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┐ + * │10 │11 │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │1e │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ ├───┤ + * │20 │21 │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │ │2e │ + * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┼───┤ + * │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3c │3d │3e │ + * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤ + * │40 │41 │42 │46 │4a │4b │ │4c │4d │4e │ + * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘ + */ +#define LAYOUT_65_iso_blocker_split_bs( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K2D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K1D, K2E, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K46, K4A, K4B, K4C, K4D, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, K4E }, \ +} + + +/* LAYOUT_65_ansi_blocker_split_lshift * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0d │ ◯ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┐ @@ -144,12 +172,12 @@ * │40 │41 │42 │46 │4a │4b │ │4c │4d │4e │ * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘ */ -#define LAYOUT_65_ansi_split_lshift( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2E, \ - K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ - K40, K41, K42, K46, K4A, K4B, K4C, K4D, K4E \ +#define LAYOUT_65_ansi_blocker_split_lshift( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2E, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K46, K4A, K4B, K4C, K4D, K4E \ ) { \ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ @@ -159,7 +187,7 @@ } -/* LAYOUT_65_split_space +/* LAYOUT_65_ansi_blocker_split_space * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0d │ ◯ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┐ @@ -172,12 +200,12 @@ * │40 │41 │42 │44 │46 │48 │4a │4b │ │4c │4d │4e │ * └────┴────┴────┴────────┴────┴──────────┴────┴────┘ └───┴───┴───┘ */ -#define LAYOUT_65_split_space( \ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2E, \ - K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ - K40, K41, K42, K44, K46, K48, K4A, K4B, K4C, K4D, K4E \ +#define LAYOUT_65_ansi_blocker_split_space( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2E, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K44, K46, K48, K4A, K4B, K4C, K4D, K4E \ ) { \ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ @@ -185,3 +213,31 @@ { K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ { K40, K41, K42, KC_NO, K44, KC_NO, K46, KC_NO, K48, KC_NO, K4A, K4B, K4C, K4D, K4E }, \ } + + +/* LAYOUT_65_iso_blocker_split_space + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┐ + * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0a │0b │0c │0d │ ◯ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┐ + * │10 │11 │12 │13 │14 │15 │16 │17 │18 │19 │1a │1b │1c │1d │1e │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ ├───┤ + * │20 │21 │22 │23 │24 │25 │26 │27 │28 │29 │2a │2b │2c │ │2e │ + * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┼───┤ + * │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3a │3b │3c │3d │3e │ + * ├────┼───┴┬──┴─┬─┴───┴──┬┴───┼───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤ + * │40 │41 │42 │44 │46 │48 │4a │4b │ │4c │4d │4e │ + * └────┴────┴────┴────────┴────┴──────────┴────┴────┘ └───┴───┴───┘ + */ +#define LAYOUT_65_iso_blocker_split_space( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2E, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K44, K46, K48, K4A, K4B, K4C, K4D, K4E \ +) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, KC_NO, K2E }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, K41, K42, KC_NO, K44, KC_NO, K46, KC_NO, K48, KC_NO, K4A, K4B, K4C, K4D, K4E }, \ +} From 60b032e3bf4d068a87b00b34dc65db39c85b35e3 Mon Sep 17 00:00:00 2001 From: jels <66403163+Jels-kb@users.noreply.github.com> Date: Sat, 20 Nov 2021 13:47:58 +1000 Subject: [PATCH 545/595] [Keyboard] Added Jels88 (#15090) Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Ryan <fauxpark@users.noreply.github.com> Co-authored-by: Ryan <fauxpark@gmail.com> --- keyboards/jels/jels88/config.h | 70 ++++++++++++ keyboards/jels/jels88/info.json | 102 ++++++++++++++++++ keyboards/jels/jels88/jels88.c | 38 +++++++ keyboards/jels/jels88/jels88.h | 89 +++++++++++++++ .../jels/jels88/keymaps/default/keymap.c | 54 ++++++++++ keyboards/jels/jels88/keymaps/via/keymap.c | 54 ++++++++++ keyboards/jels/jels88/keymaps/via/rules.mk | 1 + keyboards/jels/jels88/readme.md | 25 +++++ keyboards/jels/jels88/rules.mk | 22 ++++ 9 files changed, 455 insertions(+) create mode 100644 keyboards/jels/jels88/config.h create mode 100644 keyboards/jels/jels88/info.json create mode 100644 keyboards/jels/jels88/jels88.c create mode 100644 keyboards/jels/jels88/jels88.h create mode 100644 keyboards/jels/jels88/keymaps/default/keymap.c create mode 100644 keyboards/jels/jels88/keymaps/via/keymap.c create mode 100644 keyboards/jels/jels88/keymaps/via/rules.mk create mode 100644 keyboards/jels/jels88/readme.md create mode 100644 keyboards/jels/jels88/rules.mk diff --git a/keyboards/jels/jels88/config.h b/keyboards/jels/jels88/config.h new file mode 100644 index 0000000000..3018e15c86 --- /dev/null +++ b/keyboards/jels/jels88/config.h @@ -0,0 +1,70 @@ +/* Copyright 2021 Joah Nelson (Jels) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor paramater */ +#define VENDOR_ID 0x006a // Jels (J) +#define PRODUCT_ID 0x0088 // Jels 88 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Jels +#define PRODUCT Jels88 + +/* Define Matrix size */ +#define MATRIX_ROWS 12 +#define MATRIX_COLS 9 + +/*Define Matrix Pins */ +#define MATRIX_ROW_PINS \ + { B3, B2, D1, D0, E6, B0, F0, F1, B5, B4, D7, D6 } +#define MATRIX_COL_PINS \ + { C7, C6, F7, F6, F5, F4, B1, D2, D3 } + +/* ws2812b RGB LEDs */ +#define RGB_DI_PIN B6 + +#ifdef RGBLIGHT_ENABLE +#define RGBLED_NUM 20 // Number of LEDs +#define RGBLIGHT_SLEEP +#define RGBLIGHT_EFFECT_BREATHING +#define RGBLIGHT_EFFECT_RAINBOW_MOOD +#define RGBLIGHT_EFFECT_RAINBOW_SWIRL +#define RGBLIGHT_EFFECT_SNAKE +#define RGBLIGHT_EFFECT_KNIGHT +#define RGBLIGHT_EFFECT_CHRISTMAS +#define RGBLIGHT_EFFECT_STATIC_GRADIENT +#define RGBLIGHT_EFFECT_RGB_TEST +#define RGBLIGHT_EFFECT_ALTERNATING +#define RGBLIGHT_EFFECT_TWINKLE +#define RGBLIGHT_DEFAULT_VAL 0 // start off +#define RGBLIGHT_LIMIT_VAL 225 // keep PCB under 500mA +#endif + +/* COL2ROW or ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +#define BOOTMAGIC_LITE_ROW 1 +#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/jels/jels88/info.json b/keyboards/jels/jels88/info.json new file mode 100644 index 0000000000..96a740a9fd --- /dev/null +++ b/keyboards/jels/jels88/info.json @@ -0,0 +1,102 @@ +{ + "keyboard_name": "Jels88", + "url": "", + "maintainer": "Jels", + "layouts": { + "LAYOUT_all": { + "layout": [ + { "label": "Esc", "x": 0, "y": 0 }, + { "label": "F1", "x": 1.25, "y": 0 }, + { "label": "F2", "x": 2.25, "y": 0 }, + { "label": "F3", "x": 3.25, "y": 0 }, + { "label": "F4", "x": 4.25, "y": 0 }, + { "label": "F5", "x": 5.5, "y": 0 }, + { "label": "F6", "x": 6.5, "y": 0 }, + { "label": "F7", "x": 7.5, "y": 0 }, + { "label": "F8", "x": 8.5, "y": 0 }, + { "label": "F9", "x": 9.75, "y": 0 }, + { "label": "F10", "x": 10.75, "y": 0 }, + { "label": "F11", "x": 11.75, "y": 0 }, + { "label": "F12", "x": 12.75, "y": 0 }, + { "label": "F13", "x": 14, "y": 0 }, + { "label": "PrtSc", "x": 15.25, "y": 0 }, + { "label": "Scroll Lock", "x": 16.25, "y": 0 }, + { "label": "Pause", "x": 17.25, "y": 0 }, + { "label": "~", "x": 0, "y": 1.25 }, + { "label": "!", "x": 1, "y": 1.25 }, + { "label": "@", "x": 2, "y": 1.25 }, + { "label": "#", "x": 3, "y": 1.25 }, + { "label": "$", "x": 4, "y": 1.25 }, + { "label": "%", "x": 5, "y": 1.25 }, + { "label": "^", "x": 6, "y": 1.25 }, + { "label": "&", "x": 7, "y": 1.25 }, + { "label": "*", "x": 8, "y": 1.25 }, + { "label": "(", "x": 9, "y": 1.25 }, + { "label": ")", "x": 10, "y": 1.25 }, + { "label": "_", "x": 11, "y": 1.25 }, + { "label": "+", "x": 12, "y": 1.25 }, + { "label": "Bksp", "x": 13, "y": 1.25 }, + { "label": "~", "x": 14, "y": 1.25 }, + { "label": "Insert", "x": 15.25, "y": 1.25 }, + { "label": "Home", "x": 16.25, "y": 1.25 }, + { "label": "PgUp", "x": 17.25, "y": 1.25 }, + { "label": "Tab", "x": 0, "y": 2.25, "w": 1.5 }, + { "label": "Q", "x": 1.5, "y": 2.25 }, + { "label": "W", "x": 2.5, "y": 2.25 }, + { "label": "E", "x": 3.5, "y": 2.25 }, + { "label": "R", "x": 4.5, "y": 2.25 }, + { "label": "T", "x": 5.5, "y": 2.25 }, + { "label": "Y", "x": 6.5, "y": 2.25 }, + { "label": "U", "x": 7.5, "y": 2.25 }, + { "label": "I", "x": 8.5, "y": 2.25 }, + { "label": "O", "x": 9.5, "y": 2.25 }, + { "label": "P", "x": 10.5, "y": 2.25 }, + { "label": "{", "x": 11.5, "y": 2.25 }, + { "label": "}", "x": 12.5, "y": 2.25 }, + { "label": "|", "x": 13.5, "y": 2.25, "w": 1.5 }, + { "label": "Delete", "x": 15.25, "y": 2.25 }, + { "label": "End", "x": 16.25, "y": 2.25 }, + { "label": "PgDn", "x": 17.25, "y": 2.25 }, + { "label": "Caps Lock", "x": 0, "y": 3.25, "w": 1.75 }, + { "label": "A", "x": 1.75, "y": 3.25 }, + { "label": "S", "x": 2.75, "y": 3.25 }, + { "label": "D", "x": 3.75, "y": 3.25 }, + { "label": "F", "x": 4.75, "y": 3.25 }, + { "label": "G", "x": 5.75, "y": 3.25 }, + { "label": "H", "x": 6.75, "y": 3.25 }, + { "label": "J", "x": 7.75, "y": 3.25 }, + { "label": "K", "x": 8.75, "y": 3.25 }, + { "label": "L", "x": 9.75, "y": 3.25 }, + { "label": ":", "x": 10.75, "y": 3.25 }, + { "label": "\"", "x": 11.75, "y": 3.25 }, + { "label": "Enter", "x": 12.75, "y": 3.25, "w": 2.25 }, + { "label": "Shift", "x": 0, "y": 4.25, "w": 1.25 }, + { "label": "|", "x": 1.25, "y": 4.25 }, + { "label": "Z", "x": 2.25, "y": 4.25 }, + { "label": "X", "x": 3.25, "y": 4.25 }, + { "label": "C", "x": 4.25, "y": 4.25 }, + { "label": "V", "x": 5.25, "y": 4.25 }, + { "label": "B", "x": 6.25, "y": 4.25 }, + { "label": "N", "x": 7.25, "y": 4.25 }, + { "label": "M", "x": 8.25, "y": 4.25 }, + { "label": "<", "x": 9.25, "y": 4.25 }, + { "label": ">", "x": 10.25, "y": 4.25 }, + { "label": "?", "x": 11.25, "y": 4.25 }, + { "label": "Shift", "x": 12.25, "y": 4.25, "w": 1.75 }, + { "x": 14, "y": 4.25 }, + { "label": "\u2191", "x": 16.25, "y": 4.25 }, + { "label": "Ctrl", "x": 0, "y": 5.25, "w": 1.25 }, + { "label": "Win", "x": 1.25, "y": 5.25, "w": 1.25 }, + { "label": "Alt", "x": 2.5, "y": 5.25, "w": 1.25 }, + { "x": 3.75, "y": 5.25, "w": 6.25 }, + { "label": "Alt", "x": 10, "y": 5.25, "w": 1.25 }, + { "label": "Win", "x": 11.25, "y": 5.25, "w": 1.25 }, + { "label": "Menu", "x": 12.5, "y": 5.25, "w": 1.25 }, + { "label": "Ctrl", "x": 13.75, "y": 5.25, "w": 1.25 }, + { "label": "\u2190", "x": 15.25, "y": 5.25 }, + { "label": "\u2193", "x": 16.25, "y": 5.25 }, + { "label": "\u2192", "x": 17.25, "y": 5.25 } + ] + } + } +} diff --git a/keyboards/jels/jels88/jels88.c b/keyboards/jels/jels88/jels88.c new file mode 100644 index 0000000000..bd8e30e4ee --- /dev/null +++ b/keyboards/jels/jels88/jels88.c @@ -0,0 +1,38 @@ +/* Copyright 2021 Joah Nelson (Jels) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +// not much here ... just indicator LEDs + +#include "jels88.h" + +// LED indicator pins +#define CAPS_LED D5 +#define SCROLL_LED D4 + +void keyboard_pre_init_kb() { + setPinOutput(CAPS_LED); + setPinOutput(SCROLL_LED); + keyboard_pre_init_user(); +} + +bool led_update_kb(led_t led_state) { + bool res = led_update_user(led_state); + if (res) { + writePin(CAPS_LED, led_state.caps_lock); + writePin(SCROLL_LED, led_state.scroll_lock); + } + return res; +} diff --git a/keyboards/jels/jels88/jels88.h b/keyboards/jels/jels88/jels88.h new file mode 100644 index 0000000000..8314d0d2e0 --- /dev/null +++ b/keyboards/jels/jels88/jels88.h @@ -0,0 +1,89 @@ +/* copyright 2021 Joah Nelson (Jels) +* +* This program is free software: you can redistribute it and/or modify +* it under the terms of the GNU General Public License as published by +* the Free Software Foundation, either version 2 of the License, or +* (at your option) any later version. +* +* This program is distributed in the hope that it will be useful, +* but WITHOUT ANY WARRANTY; without even the implied warranty of +* MERAHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +* GNU General Public License for more details. +* +* You should have received a copy of the GNU General Public License +* along with this program. If not, see <https://www.gnu.org/licenses/>. +*/ + +#pragma once + +#include "quantum.h" + +#define ____ KC_NO + + +#define LAYOUT_all( \ + K0B0, K0B1, K0A1, K0A2, K0B2, K0B3, K0A3, K0A4, K0B4, K0B5, K0A5, K0A6, K0B6, K0B7, K0A7, K0A8, K0B8, \ + K1A0, K1A1, K1B1, K1B2, K1A2, K1A3, K1B3, K1B4, K1A4, K1A5, K1B5, K1B6, K1A6, K1A7, K2B7, K2A7, K2A8, K1A8, \ + K2B0, K2B1, K2A1, K2A2, K2B2, K2B3, K2A3, K2A4, K2B4, K2B5, K2A5, K2A6, K2B6, K3A7, K1B7, K1B8, K2B8, \ + K3A0, K3A1, K3B1, K3B2, K3A2, K3A3, K3B3, K3B4, K3A4, K3A5, K3B5, K3B6, K3A6, \ + K4B0, K4B1, K4A1, K4A2, K4B2, K4B3, K4A3, K4A4, K4B4, K4B5, K4A5, K4A6, K4B6, K4B7, K4A7, \ + K5A0, K5A1, K5B1, K5B3, K5A5, K5A6, K5B6, K5B7, K5A7, K5A8, K4A8 \ +){ \ + {____, K0A1, K0A2, K0A3, K0A4, K0A5, K0A6, K0A7, K0A8}, \ + {K0B0, K0B1, K0B2, K0B3, K0B4, K0B5, K0B6, K0B7, K0B8}, \ + {K1A0, K1A1, K1A2, K1A3, K1A4, K1A5, K1A6, K1A7, K1A8}, \ + {____, K1B1, K1B2, K1B3, K1B4, K1B5, K1B6, K1B7, K1B8}, \ + {____, K2A1, K2A2, K2A3, K2A4, K2A5, K2A6, K2A7, K2A8}, \ + {K2B0, K2B1, K2B2, K2B3, K2B4, K2B5, K2B6, K2B7, K2B8}, \ + {K3A0, K3A1, K3A2, K3A3, K3A4, K3A5, K3A6, K3A7, ____}, \ + {____, K3B1, K3B2, K3B3, K3B4, K3B5, K3B6, ____, ____}, \ + {____, K4A1, K4A2, K4A3, K4A4, K4A5, K4A6, K4A7, K4A8}, \ + {K4B0, K4B1, K4B2, K4B3, K4B4, K4B5, K4B6, K4B7, ____}, \ + {K5A0, K5A1, ____, ____, ____, K5A5, K5A6, K5A7, K5A8}, \ + {____, K5B1, ____, K5B3, ____, ____, K5B6, K5B7, ____} \ +} + +#define LAYOUT_ansi( \ + K0B0, K0B1, K0A1, K0A2, K0B2, K0B3, K0A3, K0A4, K0B4, K0B5, K0A5, K0A6, K0B6, K0B7, K0A7, K0A8, K0B8, \ + K1A0, K1A1, K1B1, K1B2, K1A2, K1A3, K1B3, K1B4, K1A4, K1A5, K1B5, K1B6, K1A6, K1A7, K2B7, K2A7, K2A8, K1A8, \ + K2B0, K2B1, K2A1, K2A2, K2B2, K2B3, K2A3, K2A4, K2B4, K2B5, K2A5, K2A6, K2B6, K3A7, K1B7, K1B8, K2B8, \ + K3A0, K3A1, K3B1, K3B2, K3A2, K3A3, K3B3, K3B4, K3A4, K3A5, K3B5, K3B6, K3A6, \ + K4B0, K4A1, K4A2, K4B2, K4B3, K4A3, K4A4, K4B4, K4B5, K4A5, K4A6, K4B6, K4B7, K4A7, \ + K5A0, K5A1, K5B1, K5B3, K5A5, K5A6, K5B6, K5B7, K5A7, K5A8, K4A8 \ +){ \ + {____, K0A1, K0A2, K0A3, K0A4, K0A5, K0A6, K0A7, K0A8}, \ + {K0B0, K0B1, K0B2, K0B3, K0B4, K0B5, K0B6, K0B7, K0B8}, \ + {K1A0, K1A1, K1A2, K1A3, K1A4, K1A5, K1A6, K1A7, K1A8}, \ + {____, K1B1, K1B2, K1B3, K1B4, K1B5, K1B6, K1B7, K1B8}, \ + {____, K2A1, K2A2, K2A3, K2A4, K2A5, K2A6, K2A7, K2A8}, \ + {K2B0, K2B1, K2B2, K2B3, K2B4, K2B5, K2B6, K2B7, K2B8}, \ + {K3A0, K3A1, K3A2, K3A3, K3A4, K3A5, K3A6, K3A7, ____}, \ + {____, K3B1, K3B2, K3B3, K3B4, K3B5, K3B6, ____, ____}, \ + {____, K4A1, K4A2, K4A3, K4A4, K4A5, K4A6, K4A7, K4A8}, \ + {K4B0, K4B1, K4B2, K4B3, K4B4, K4B5, K4B6, K4B7, ____}, \ + {K5A0, K5A1, ____, ____, ____, K5A5, K5A6, K5A7, K5A8}, \ + {____, K5B1, ____, K5B3, ____, ____, K5B6, K5B7, ____} \ +} + + +#define LAYOUT_iso( \ + K0B0, K0B1, K0A1, K0A2, K0B2, K0B3, K0A3, K0A4, K0B4, K0B5, K0A5, K0A6, K0B6, K0B7, K0A7, K0A8, K0B8, \ + K1A0, K1A1, K1B1, K1B2, K1A2, K1A3, K1B3, K1B4, K1A4, K1A5, K1B5, K1B6, K1A6, K1A7, K3A7, K2A7, K2A8, K1A8, \ + K2B0, K2B1, K2A1, K2A2, K2B2, K2B3, K2A3, K2A4, K2B4, K2B5, K2A5, K2A6, K2B6, K2B7, K1B7, K1B8, K2B8, \ + K3A0, K3A1, K3B1, K3B2, K3A2, K3A3, K3B3, K3B4, K3A4, K3A5, K3B5, K3B6, K3A6, \ + K4B0, K4A1, K4A2, K4B2, K4B3, K4A3, K4A4, K4B4, K4B5, K4A5, K4A6, K4B6, K4B7, K4A7, \ + K5A0, K5A1, K5B1, K5B3, K5A5, K5A6, K5B6, K5B7, K5A7, K5A8, K4A8 \ +){ \ + {____, K0A1, K0A2, K0A3, K0A4, K0A5, K0A6, K0A7, K0A8}, \ + {K0B0, K0B1, K0B2, K0B3, K0B4, K0B5, K0B6, K0B7, K0B8}, \ + {K1A0, K1A1, K1A2, K1A3, K1A4, K1A5, K1A6, K1A7, K1A8}, \ + {____, K1B1, K1B2, K1B3, K1B4, K1B5, K1B6, K1B7, K1B8}, \ + {____, K2A1, K2A2, K2A3, K2A4, K2A5, K2A6, K2A7, K2A8}, \ + {K2B0, K2B1, K2B2, K2B3, K2B4, K2B5, K2B6, K2B7, K2B8}, \ + {K3A0, K3A1, K3A2, K3A3, K3A4, K3A5, K3A6, K3A7, ____}, \ + {____, K3B1, K3B2, K3B3, K3B4, K3B5, K3B6, ____, ____}, \ + {____, K4A1, K4A2, K4A3, K4A4, K4A5, K4A6, K4A7, K4A8}, \ + {K4B0, ____, K4B2, K4B3, K4B4, K4B5, K4B6, K4B7, ____}, \ + {K5A0, K5A1, ____, ____, ____, K5A5, K5A6, K5A7, K5A8}, \ + {____, K5B1, ____, K5B3, ____, ____, K5B6, K5B7, ____} \ +} diff --git a/keyboards/jels/jels88/keymaps/default/keymap.c b/keyboards/jels/jels88/keymaps/default/keymap.c new file mode 100644 index 0000000000..f8ee717537 --- /dev/null +++ b/keyboards/jels/jels88/keymaps/default/keymap.c @@ -0,0 +1,54 @@ +/* Copyright 2021 Joah Nelson (Jels) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +//base layer +[0] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_BSLS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT +), +[1] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), +[2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS +), +[3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/jels/jels88/keymaps/via/keymap.c b/keyboards/jels/jels88/keymaps/via/keymap.c new file mode 100644 index 0000000000..f8ee717537 --- /dev/null +++ b/keyboards/jels/jels88/keymaps/via/keymap.c @@ -0,0 +1,54 @@ +/* Copyright 2021 Joah Nelson (Jels) + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +//base layer +[0] = LAYOUT_all( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_GRV, KC_INS, KC_HOME, KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, + KC_LSFT, KC_BSLS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1), KC_UP, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RALT, KC_RGUI, KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT +), +[1] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ), +[2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS +), +[3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + ) +}; diff --git a/keyboards/jels/jels88/keymaps/via/rules.mk b/keyboards/jels/jels88/keymaps/via/rules.mk new file mode 100644 index 0000000000..1e5b99807c --- /dev/null +++ b/keyboards/jels/jels88/keymaps/via/rules.mk @@ -0,0 +1 @@ +VIA_ENABLE = yes diff --git a/keyboards/jels/jels88/readme.md b/keyboards/jels/jels88/readme.md new file mode 100644 index 0000000000..0ea1f4c64c --- /dev/null +++ b/keyboards/jels/jels88/readme.md @@ -0,0 +1,25 @@ +# jels88 + +![jels88](https://i.imgur.com/7kuYR4G.png) + +* Keyboard Maintainer: [jels](https://github.com/Jels-kb) +* Hardware Supported: jels88b/jels88c PCB +* Hardware Availabililty: Group buys, Various dates. + +Make example for this keyboard (after setting up your build environment): + + make jels/jels88:default + +Flashing example for this keyboard: + + make jels/jels88:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the top right key (ESC) and plug in the keyboard +* **Physical reset button**: Briefly press the button on the back of the PCB +* **Keycode in layout**: Press the key mapped to `RESET` if it is available diff --git a/keyboards/jels/jels88/rules.mk b/keyboards/jels/jels88/rules.mk new file mode 100644 index 0000000000..5c97c17ce9 --- /dev/null +++ b/keyboards/jels/jels88/rules.mk @@ -0,0 +1,22 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output + From eff9288759bc8156e9b650a12378796772abb6fc Mon Sep 17 00:00:00 2001 From: ForeverAnApple <kinbd8@gmail.com> Date: Fri, 19 Nov 2021 20:14:54 -0800 Subject: [PATCH 546/595] [Keymap] Initial simple keymap for ForeverAnApple (#14654) Co-authored-by: Ryan <fauxpark@gmail.com> --- .../planck/keymaps/foreveranapple/config.h | 46 ++ .../planck/keymaps/foreveranapple/keymap.c | 413 ++++++++++++++++++ .../planck/keymaps/foreveranapple/readme.md | 3 + .../planck/keymaps/foreveranapple/rules.mk | 2 + 4 files changed, 464 insertions(+) create mode 100644 keyboards/planck/keymaps/foreveranapple/config.h create mode 100644 keyboards/planck/keymaps/foreveranapple/keymap.c create mode 100644 keyboards/planck/keymaps/foreveranapple/readme.md create mode 100644 keyboards/planck/keymaps/foreveranapple/rules.mk diff --git a/keyboards/planck/keymaps/foreveranapple/config.h b/keyboards/planck/keymaps/foreveranapple/config.h new file mode 100644 index 0000000000..6e6d0f3ac7 --- /dev/null +++ b/keyboards/planck/keymaps/foreveranapple/config.h @@ -0,0 +1,46 @@ +/* Copyright 2015-2021 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#ifdef AUDIO_ENABLE +# define STARTUP_SONG SONG(PLANCK_SOUND) +// #define STARTUP_SONG SONG(NO_SOUND) + +# define DEFAULT_LAYER_SONGS \ + { SONG(QWERTY_SOUND), SONG(COLEMAK_SOUND), SONG(DVORAK_SOUND) } +#endif + +/* + * MIDI options + */ + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ + +#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +// Most tactile encoders have detents every 4 stages +#define ENCODER_RESOLUTION 4 diff --git a/keyboards/planck/keymaps/foreveranapple/keymap.c b/keyboards/planck/keymaps/foreveranapple/keymap.c new file mode 100644 index 0000000000..3c5ab7cd02 --- /dev/null +++ b/keyboards/planck/keymaps/foreveranapple/keymap.c @@ -0,0 +1,413 @@ +/* Copyright 2015-2021 Jack Humbert + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H +#include "muse.h" + + +enum planck_layers { + _QWERTY, + _OSX, + _NIXQWERTY, + _COLEMAK, + _DVORAK, + _LOWER, + _RAISE, + _PLOVER, + _ADJUST +}; + +enum planck_keycodes { + QWERTY = SAFE_RANGE, + OSX, + NIXQWERTY, + COLEMAK, + DVORAK, + PLOVER, + BACKLIT, + EXT_PLV +}; + +#define LOWER MO(_LOWER) +#define RAISE MO(_RAISE) + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Ctrl |Brite | Alt | GUI |Raise | Space |Lower | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = LAYOUT_planck_grid( + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , + KC_LCTL, BACKLIT, KC_LALT, KC_LGUI, RAISE, KC_SPC, KC_SPC, LOWER, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT +), + +/* OSX - Qwerty + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | CMD |Brite | Alt | CTRL |Raise | Space |Lower | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_OSX] = LAYOUT_planck_grid( + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , + KC_LGUI, BACKLIT, KC_LALT, KC_LCTL, RAISE, KC_SPC, KC_SPC, LOWER, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT +), + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_COLEMAK] = LAYOUT_planck_grid( + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, + KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , + BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT +), + +/* Dvorak + * ,-----------------------------------------------------------------------------------. + * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Esc | A | O | E | U | I | D | H | T | N | S | / | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Brite| Ctrl | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_DVORAK] = LAYOUT_planck_grid( + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, + KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT , + BACKLIT, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT +), + +/* NixQwerty + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Ctrl |Brite | Alt | GUI |Lower | Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_NIXQWERTY] = LAYOUT_planck_grid( + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , + KC_LCTL, BACKLIT, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT +), + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | Home | End | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = LAYOUT_planck_grid( + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END, _______, + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY +), + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / |Pg Up |Pg Dn | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = LAYOUT_planck_grid( + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______, + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY +), + +/* Plover layer (http://opensteno.org) + * ,-----------------------------------------------------------------------------------. + * | # | # | # | # | # | # | # | # | # | # | # | # | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | S | T | P | H | * | * | F | P | L | T | D | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | S | K | W | R | * | * | R | B | G | S | Z | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | Exit | | | A | O | | E | U | | | | + * `-----------------------------------------------------------------------------------' + */ +[_PLOVER] = LAYOUT_planck_grid( + KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1, KC_1 , + XXXXXXX, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, + XXXXXXX, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + EXT_PLV, XXXXXXX, XXXXXXX, KC_C, KC_V, XXXXXXX, XXXXXXX, KC_N, KC_M, XXXXXXX, XXXXXXX, XXXXXXX +), + +/* Adjust (Lower + Raise) + * v------------------------RGB CONTROL--------------------v + * ,-----------------------------------------------------------------------------------. + * | | Reset|Debug | RGB |RGBMOD| HUE+ | HUE- | SAT+ | SAT- |BRGTH+|BRGTH-| Del | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | |MUSmod|Aud on|Audoff|AGnorm|AGswap|Qwerty|NixQty| OSX |Plover|Colemk| + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | |Voice-|Voice+|Mus on|Musoff|MIDIon|MIDIof|TermOn|TermOf| | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = LAYOUT_planck_grid( + _______, RESET, DEBUG, RGB_TOG, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, KC_DEL, + _______, _______, MU_MOD, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, NIXQWERTY, OSX, PLOVER, COLEMAK, + _______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, TERM_ON, TERM_OFF, DVORAK, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ +) + +}; + +#ifdef AUDIO_ENABLE + float plover_song[][2] = SONG(PLOVER_SOUND); + float plover_gb_song[][2] = SONG(PLOVER_GOODBYE_SOUND); +#endif + +layer_state_t layer_state_set_user(layer_state_t state) { + return update_tri_layer_state(state, _LOWER, _RAISE, _ADJUST); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + print("mode just switched to qwerty and this is a huge string\n"); + set_single_persistent_default_layer(_QWERTY); + } + return false; + break; + case OSX: + if (record->event.pressed) { + set_single_persistent_default_layer(_OSX); + #ifdef AUDIO_ENABLE + stop_all_notes(); + PLAY_SONG(plover_song); + #endif + } + return false; + break; + case NIXQWERTY: + if (record->event.pressed) { + set_single_persistent_default_layer(_NIXQWERTY); + #ifdef AUDIO_ENABLE + stop_all_notes(); + PLAY_SONG(plover_song); + #endif + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + set_single_persistent_default_layer(_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + set_single_persistent_default_layer(_DVORAK); + } + return false; + break; + case BACKLIT: + if (record->event.pressed) { + register_code(KC_RSFT); + #ifdef BACKLIGHT_ENABLE + backlight_step(); + #endif + #ifdef KEYBOARD_planck_rev5 + writePinLow(E6); + #endif + } else { + unregister_code(KC_RSFT); + #ifdef KEYBOARD_planck_rev5 + writePinHigh(E6); + #endif + } + return false; + break; + case PLOVER: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + stop_all_notes(); + PLAY_SONG(plover_song); + #endif + layer_off(_RAISE); + layer_off(_LOWER); + layer_off(_ADJUST); + layer_on(_PLOVER); + if (!eeconfig_is_enabled()) { + eeconfig_init(); + } + keymap_config.raw = eeconfig_read_keymap(); + keymap_config.nkro = 1; + eeconfig_update_keymap(keymap_config.raw); + } + return false; + break; + case EXT_PLV: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_SONG(plover_gb_song); + #endif + layer_off(_PLOVER); + } + return false; + break; + } + return true; +} + +bool muse_mode = false; +uint8_t last_muse_note = 0; +uint16_t muse_counter = 0; +uint8_t muse_offset = 70; +uint16_t muse_tempo = 50; + +bool encoder_update_user(uint8_t index, bool clockwise) { + if (muse_mode) { + if (IS_LAYER_ON(_RAISE)) { + if (clockwise) { + muse_offset++; + } else { + muse_offset--; + } + } else { + if (clockwise) { + muse_tempo+=1; + } else { + muse_tempo-=1; + } + } + } else { + if (clockwise) { + #ifdef MOUSEKEY_ENABLE + tap_code(KC_MS_WH_DOWN); + #else + tap_code(KC_PGDN); + #endif + } else { + #ifdef MOUSEKEY_ENABLE + tap_code(KC_MS_WH_UP); + #else + tap_code(KC_PGUP); + #endif + } + } + return true; +} + +bool dip_switch_update_user(uint8_t index, bool active) { + switch (index) { + case 0: { +#ifdef AUDIO_ENABLE + static bool play_sound = false; +#endif + if (active) { +#ifdef AUDIO_ENABLE + if (play_sound) { PLAY_SONG(plover_song); } +#endif + layer_on(_ADJUST); + } else { +#ifdef AUDIO_ENABLE + if (play_sound) { PLAY_SONG(plover_gb_song); } +#endif + layer_off(_ADJUST); + } +#ifdef AUDIO_ENABLE + play_sound = true; +#endif + break; + } + case 1: + if (active) { + muse_mode = true; + } else { + muse_mode = false; + } + } + return true; +} + +void matrix_scan_user(void) { +#ifdef AUDIO_ENABLE + if (muse_mode) { + if (muse_counter == 0) { + uint8_t muse_note = muse_offset + SCALE[muse_clock_pulse()]; + if (muse_note != last_muse_note) { + stop_note(compute_freq_for_midi_note(last_muse_note)); + play_note(compute_freq_for_midi_note(muse_note), 0xF); + last_muse_note = muse_note; + } + } + muse_counter = (muse_counter + 1) % muse_tempo; + } else { + if (muse_counter) { + stop_all_notes(); + muse_counter = 0; + } + } +#endif +} + +bool music_mask_user(uint16_t keycode) { + switch (keycode) { + case RAISE: + case LOWER: + return false; + default: + return true; + } +} diff --git a/keyboards/planck/keymaps/foreveranapple/readme.md b/keyboards/planck/keymaps/foreveranapple/readme.md new file mode 100644 index 0000000000..ddaa58ea36 --- /dev/null +++ b/keyboards/planck/keymaps/foreveranapple/readme.md @@ -0,0 +1,3 @@ +# The Almost Default Planck Layout + +Simple changes right now, just some key shifts. Nothing major. \ No newline at end of file diff --git a/keyboards/planck/keymaps/foreveranapple/rules.mk b/keyboards/planck/keymaps/foreveranapple/rules.mk new file mode 100644 index 0000000000..87df38d49e --- /dev/null +++ b/keyboards/planck/keymaps/foreveranapple/rules.mk @@ -0,0 +1,2 @@ +SRC += muse.c +AUDIO_ENABLED = yes \ No newline at end of file From 32215d5bff52262542a2f8d2a221b0303f02c019 Mon Sep 17 00:00:00 2001 From: Balz Guenat <balz.guenat@gmail.com> Date: Sat, 20 Nov 2021 18:06:08 +0100 Subject: [PATCH 547/595] Rework encoders to enable asymmetric split keyboards (#12090) Co-authored-by: Balz Guenat <balz.guenat@siemens.com> Co-authored-by: Nick Brassel <nick@tzarc.org> --- build_test.mk | 1 + docs/feature_encoders.md | 15 +- quantum/encoder.c | 146 +++++++++++------- quantum/encoder.h | 3 +- quantum/encoder/tests/encoder_tests.cpp | 144 +++++++++++++++++ quantum/encoder/tests/encoder_tests_split.cpp | 143 +++++++++++++++++ quantum/encoder/tests/mock.c | 34 ++++ quantum/encoder/tests/mock.h | 40 +++++ quantum/encoder/tests/mock_split.c | 36 +++++ quantum/encoder/tests/mock_split.h | 48 ++++++ quantum/encoder/tests/rules.mk | 13 ++ quantum/encoder/tests/testlist.mk | 3 + quantum/split_common/transport.h | 6 +- testlist.mk | 1 + 14 files changed, 575 insertions(+), 58 deletions(-) create mode 100644 quantum/encoder/tests/encoder_tests.cpp create mode 100644 quantum/encoder/tests/encoder_tests_split.cpp create mode 100644 quantum/encoder/tests/mock.c create mode 100644 quantum/encoder/tests/mock.h create mode 100644 quantum/encoder/tests/mock_split.c create mode 100644 quantum/encoder/tests/mock_split.h create mode 100644 quantum/encoder/tests/rules.mk create mode 100644 quantum/encoder/tests/testlist.mk diff --git a/build_test.mk b/build_test.mk index 3553125a04..36cb7936ed 100644 --- a/build_test.mk +++ b/build_test.mk @@ -57,6 +57,7 @@ include $(BUILDDEFS_PATH)/generic_features.mk include $(PLATFORM_PATH)/common.mk include $(TMK_PATH)/protocol.mk include $(QUANTUM_PATH)/debounce/tests/rules.mk +include $(QUANTUM_PATH)/encoder/tests/rules.mk include $(QUANTUM_PATH)/sequencer/tests/rules.mk include $(PLATFORM_PATH)/test/rules.mk ifneq ($(filter $(FULL_TESTS),$(TEST)),) diff --git a/docs/feature_encoders.md b/docs/feature_encoders.md index 8e854c1e58..5b6c3f163f 100644 --- a/docs/feature_encoders.md +++ b/docs/feature_encoders.md @@ -46,7 +46,9 @@ For 4× encoders you also can assign default position if encoder skips pulses wh ## Split Keyboards -If you are using different pinouts for the encoders on each half of a split keyboard, you can define the pinout (and optionally, resolutions) for the right half like this: +The above is enough for split keyboards that are symmetrical, i.e. the halves have the same number of encoders and they are on the same pins. +If the halves are not symmetrical, you can define the pinout (and optionally, resolutions) of the right half separately. +The left half will use the definitions above. ```c #define ENCODERS_PAD_A_RIGHT { encoder1a, encoder2a } @@ -54,6 +56,17 @@ If you are using different pinouts for the encoders on each half of a split keyb #define ENCODER_RESOLUTIONS_RIGHT { 2, 4 } ``` +If only the right half has encoders, you must still define an empty array for the left pads (and resolutions, if you define `ENCODER_RESOLUTIONS_RIGHT`). + +```c +#define ENCODERS_PAD_A { } +#define ENCODERS_PAD_B { } +#define ENCODER_RESOLUTIONS { } +#define ENCODERS_PAD_A_RIGHT { encoder1a, encoder2a } +#define ENCODERS_PAD_B_RIGHT { encoder1b, encoder2b } +#define ENCODER_RESOLUTIONS_RIGHT { 2, 4 } +``` + ## Callbacks The callback functions can be inserted into your `<keyboard>.c`: diff --git a/quantum/encoder.c b/quantum/encoder.c index 8fb87281c2..7d4e978981 100644 --- a/quantum/encoder.c +++ b/quantum/encoder.c @@ -16,8 +16,17 @@ */ #include "encoder.h" -#ifdef SPLIT_KEYBOARD -# include "split_util.h" + +// this is for unit testing +#if defined(ENCODER_MOCK_SINGLE) +# include "encoder/tests/mock.h" +#elif defined(ENCODER_MOCK_SPLIT) +# include "encoder/tests/mock_split.h" +#else +# include <gpio.h> +# ifdef SPLIT_KEYBOARD +# include "split_util.h" +# endif #endif // for memcpy @@ -27,17 +36,41 @@ # define ENCODER_RESOLUTION 4 #endif -#if !defined(ENCODERS_PAD_A) || !defined(ENCODERS_PAD_B) -# error "No encoder pads defined by ENCODERS_PAD_A and ENCODERS_PAD_B" +#if (!defined(ENCODERS_PAD_A) || !defined(ENCODERS_PAD_B)) && (!defined(ENCODERS_PAD_A) || !defined(ENCODERS_PAD_B)) +# error "No encoder pads defined by ENCODERS_PAD_A and ENCODERS_PAD_B or ENCODERS_PAD_A_RIGHT and ENCODERS_PAD_B_RIGHT" #endif -#define NUMBER_OF_ENCODERS (sizeof(encoders_pad_a) / sizeof(pin_t)) +// on split keyboards, these are the pads and resolutions for the left half static pin_t encoders_pad_a[] = ENCODERS_PAD_A; static pin_t encoders_pad_b[] = ENCODERS_PAD_B; #ifdef ENCODER_RESOLUTIONS static uint8_t encoder_resolutions[] = ENCODER_RESOLUTIONS; #endif +#ifndef SPLIT_KEYBOARD +# define NUMBER_OF_ENCODERS (sizeof(encoders_pad_a) / sizeof(pin_t)) +#else +// if no pads for right half are defined, we assume the keyboard is symmetric (i.e. same pads) +# ifndef ENCODERS_PAD_A_RIGHT +# define ENCODERS_PAD_A_RIGHT ENCODERS_PAD_A +# endif +# ifndef ENCODERS_PAD_B_RIGHT +# define ENCODERS_PAD_B_RIGHT ENCODERS_PAD_B +# endif +# if defined(ENCODER_RESOLUTIONS) && !defined(ENCODER_RESOLUTIONS_RIGHT) +# define ENCODER_RESOLUTIONS_RIGHT ENCODER_RESOLUTIONS +# endif + +# define NUMBER_OF_ENCODERS ((sizeof(encoders_pad_a) + sizeof(encoders_pad_a_right)) / sizeof(pin_t)) +# define NUMBER_OF_ENCODERS_LEFT (sizeof(encoders_pad_a) / sizeof(pin_t)) +# define NUMBER_OF_ENCODERS_RIGHT (sizeof(encoders_pad_a_right) / sizeof(pin_t)) +static pin_t encoders_pad_a_right[] = ENCODERS_PAD_A_RIGHT; +static pin_t encoders_pad_b_right[] = ENCODERS_PAD_B_RIGHT; +# ifdef ENCODER_RESOLUTIONS_RIGHT +static uint8_t encoder_resolutions_right[] = ENCODER_RESOLUTIONS_RIGHT; +# endif +#endif + #ifndef ENCODER_DIRECTION_FLIP # define ENCODER_CLOCKWISE true # define ENCODER_COUNTER_CLOCKWISE false @@ -50,78 +83,81 @@ static int8_t encoder_LUT[] = {0, -1, 1, 0, 1, 0, 0, -1, -1, 0, 0, 1, 0, 1, -1, static uint8_t encoder_state[NUMBER_OF_ENCODERS] = {0}; static int8_t encoder_pulses[NUMBER_OF_ENCODERS] = {0}; -#ifdef SPLIT_KEYBOARD -// right half encoders come over as second set of encoders -static uint8_t encoder_value[NUMBER_OF_ENCODERS * 2] = {0}; -// row offsets for each hand -static uint8_t thisHand, thatHand; -#else static uint8_t encoder_value[NUMBER_OF_ENCODERS] = {0}; -#endif __attribute__((weak)) bool encoder_update_user(uint8_t index, bool clockwise) { return true; } __attribute__((weak)) bool encoder_update_kb(uint8_t index, bool clockwise) { return encoder_update_user(index, clockwise); } +// number of encoders connected to this controller +static uint8_t numEncodersHere; +// index of the first encoder connected to this controller (only for right halves, this will be nonzero) +static uint8_t firstEncoderHere; +#ifdef SPLIT_KEYBOARD +// index of the first encoder connected to the other half +static uint8_t firstEncoderThere; +#endif +// the pads for this controller +static pin_t* pad_a; +static pin_t* pad_b; + void encoder_init(void) { -#if defined(SPLIT_KEYBOARD) && defined(ENCODERS_PAD_A_RIGHT) && defined(ENCODERS_PAD_B_RIGHT) - if (!isLeftHand) { - const pin_t encoders_pad_a_right[] = ENCODERS_PAD_A_RIGHT; - const pin_t encoders_pad_b_right[] = ENCODERS_PAD_B_RIGHT; -# if defined(ENCODER_RESOLUTIONS_RIGHT) - const uint8_t encoder_resolutions_right[] = ENCODER_RESOLUTIONS_RIGHT; -# endif - for (uint8_t i = 0; i < NUMBER_OF_ENCODERS; i++) { - encoders_pad_a[i] = encoders_pad_a_right[i]; - encoders_pad_b[i] = encoders_pad_b_right[i]; -# if defined(ENCODER_RESOLUTIONS_RIGHT) - encoder_resolutions[i] = encoder_resolutions_right[i]; -# endif - } +#ifndef SPLIT_KEYBOARD + numEncodersHere = NUMBER_OF_ENCODERS; + pad_a = encoders_pad_a; + pad_b = encoders_pad_b; + firstEncoderHere = 0; +#else + if (isLeftHand) { + numEncodersHere = NUMBER_OF_ENCODERS_LEFT; + pad_a = encoders_pad_a; + pad_b = encoders_pad_b; + firstEncoderHere = 0; + firstEncoderThere = NUMBER_OF_ENCODERS_LEFT; + } else { + numEncodersHere = NUMBER_OF_ENCODERS_RIGHT; + pad_a = encoders_pad_a_right; + pad_b = encoders_pad_b_right; + firstEncoderHere = NUMBER_OF_ENCODERS_LEFT; + firstEncoderThere = 0; } #endif - for (int i = 0; i < NUMBER_OF_ENCODERS; i++) { - setPinInputHigh(encoders_pad_a[i]); - setPinInputHigh(encoders_pad_b[i]); + for (int i = 0; i < numEncodersHere; i++) { + setPinInputHigh(pad_a[i]); + setPinInputHigh(pad_b[i]); - encoder_state[i] = (readPin(encoders_pad_a[i]) << 0) | (readPin(encoders_pad_b[i]) << 1); + encoder_state[firstEncoderHere + i] = (readPin(pad_a[i]) << 0) | (readPin(pad_b[i]) << 1); } - -#ifdef SPLIT_KEYBOARD - thisHand = isLeftHand ? 0 : NUMBER_OF_ENCODERS; - thatHand = NUMBER_OF_ENCODERS - thisHand; -#endif } -static bool encoder_update(uint8_t index, uint8_t state) { - bool changed = false; - uint8_t i = index; +static bool encoder_update(int8_t index, uint8_t state) { + bool changed = false; #ifdef ENCODER_RESOLUTIONS - uint8_t resolution = encoder_resolutions[i]; +# ifndef SPLIT_KEYBOARD + int8_t resolution = encoder_resolutions[index]; +# else + int8_t resolution = isLeftHand ? encoder_resolutions[index] : encoder_resolutions_right[index - NUMBER_OF_ENCODERS_LEFT]; +# endif #else uint8_t resolution = ENCODER_RESOLUTION; #endif - -#ifdef SPLIT_KEYBOARD - index += thisHand; -#endif - encoder_pulses[i] += encoder_LUT[state & 0xF]; - if (encoder_pulses[i] >= resolution) { + encoder_pulses[index] += encoder_LUT[state & 0xF]; + if (encoder_pulses[index] >= resolution) { encoder_value[index]++; changed = true; encoder_update_kb(index, ENCODER_COUNTER_CLOCKWISE); } - if (encoder_pulses[i] <= -resolution) { // direction is arbitrary here, but this clockwise + if (encoder_pulses[index] <= -resolution) { // direction is arbitrary here, but this clockwise encoder_value[index]--; changed = true; encoder_update_kb(index, ENCODER_CLOCKWISE); } - encoder_pulses[i] %= resolution; + encoder_pulses[index] %= resolution; #ifdef ENCODER_DEFAULT_POS if ((state & 0x3) == ENCODER_DEFAULT_POS) { - encoder_pulses[i] = 0; + encoder_pulses[index] = 0; } #endif return changed; @@ -129,10 +165,10 @@ static bool encoder_update(uint8_t index, uint8_t state) { bool encoder_read(void) { bool changed = false; - for (uint8_t i = 0; i < NUMBER_OF_ENCODERS; i++) { - encoder_state[i] <<= 2; - encoder_state[i] |= (readPin(encoders_pad_a[i]) << 0) | (readPin(encoders_pad_b[i]) << 1); - changed |= encoder_update(i, encoder_state[i]); + for (uint8_t i = 0; i < numEncodersHere; i++) { + encoder_state[firstEncoderHere + i] <<= 2; + encoder_state[firstEncoderHere + i] |= (readPin(pad_a[i]) << 0) | (readPin(pad_b[i]) << 1); + changed |= encoder_update(firstEncoderHere + i, encoder_state[firstEncoderHere + i]); } return changed; } @@ -140,12 +176,12 @@ bool encoder_read(void) { #ifdef SPLIT_KEYBOARD void last_encoder_activity_trigger(void); -void encoder_state_raw(uint8_t* slave_state) { memcpy(slave_state, &encoder_value[thisHand], sizeof(uint8_t) * NUMBER_OF_ENCODERS); } +void encoder_state_raw(uint8_t* slave_state) { memcpy(slave_state, &encoder_value[firstEncoderHere], sizeof(uint8_t) * numEncodersHere); } void encoder_update_raw(uint8_t* slave_state) { bool changed = false; - for (uint8_t i = 0; i < NUMBER_OF_ENCODERS; i++) { - uint8_t index = i + thatHand; + for (uint8_t i = 0; i < NUMBER_OF_ENCODERS - numEncodersHere; i++) { + uint8_t index = firstEncoderThere + i; int8_t delta = slave_state[i] - encoder_value[index]; while (delta > 0) { delta--; diff --git a/quantum/encoder.h b/quantum/encoder.h index 25dc77721d..67f71ec0f0 100644 --- a/quantum/encoder.h +++ b/quantum/encoder.h @@ -17,7 +17,8 @@ #pragma once -#include "quantum.h" +#include <stdbool.h> +#include <stdint.h> void encoder_init(void); bool encoder_read(void); diff --git a/quantum/encoder/tests/encoder_tests.cpp b/quantum/encoder/tests/encoder_tests.cpp new file mode 100644 index 0000000000..1888fdab8d --- /dev/null +++ b/quantum/encoder/tests/encoder_tests.cpp @@ -0,0 +1,144 @@ +/* Copyright 2021 Balz Guenat + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "gtest/gtest.h" +#include "gmock/gmock.h" +#include <vector> +#include <algorithm> +#include <stdio.h> + +extern "C" { +#include "encoder.h" +#include "encoder/tests/mock.h" +} + +struct update { + int8_t index; + bool clockwise; +}; + +uint8_t uidx = 0; +update updates[32]; + +bool encoder_update_kb(uint8_t index, bool clockwise) { + updates[uidx % 32] = {index, clockwise}; + uidx++; + return true; +} + +bool setAndRead(pin_t pin, bool val) { + setPin(pin, val); + return encoder_read(); +} + +class EncoderTest : public ::testing::Test {}; + +TEST_F(EncoderTest, TestInit) { + uidx = 0; + encoder_init(); + EXPECT_EQ(pinIsInputHigh[0], true); + EXPECT_EQ(pinIsInputHigh[1], true); + EXPECT_EQ(uidx, 0); +} + +TEST_F(EncoderTest, TestOneClockwise) { + uidx = 0; + encoder_init(); + // send 4 pulses. with resolution 4, that's one step and we should get 1 update. + setAndRead(0, false); + setAndRead(1, false); + setAndRead(0, true); + setAndRead(1, true); + + EXPECT_EQ(uidx, 1); + EXPECT_EQ(updates[0].index, 0); + EXPECT_EQ(updates[0].clockwise, true); +} + +TEST_F(EncoderTest, TestOneCounterClockwise) { + uidx = 0; + encoder_init(); + setAndRead(1, false); + setAndRead(0, false); + setAndRead(1, true); + setAndRead(0, true); + + EXPECT_EQ(uidx, 1); + EXPECT_EQ(updates[0].index, 0); + EXPECT_EQ(updates[0].clockwise, false); +} + +TEST_F(EncoderTest, TestTwoClockwiseOneCC) { + uidx = 0; + encoder_init(); + setAndRead(0, false); + setAndRead(1, false); + setAndRead(0, true); + setAndRead(1, true); + setAndRead(0, false); + setAndRead(1, false); + setAndRead(0, true); + setAndRead(1, true); + setAndRead(1, false); + setAndRead(0, false); + setAndRead(1, true); + setAndRead(0, true); + + EXPECT_EQ(uidx, 3); + EXPECT_EQ(updates[0].index, 0); + EXPECT_EQ(updates[0].clockwise, true); + EXPECT_EQ(updates[1].index, 0); + EXPECT_EQ(updates[1].clockwise, true); + EXPECT_EQ(updates[2].index, 0); + EXPECT_EQ(updates[2].clockwise, false); +} + +TEST_F(EncoderTest, TestNoEarly) { + uidx = 0; + encoder_init(); + // send 3 pulses. with resolution 4, that's not enough for a step. + setAndRead(0, false); + setAndRead(1, false); + setAndRead(0, true); + EXPECT_EQ(uidx, 0); + // now send last pulse + setAndRead(1, true); + EXPECT_EQ(uidx, 1); + EXPECT_EQ(updates[0].index, 0); + EXPECT_EQ(updates[0].clockwise, true); +} + +TEST_F(EncoderTest, TestHalfway) { + uidx = 0; + encoder_init(); + // go halfway + setAndRead(0, false); + setAndRead(1, false); + EXPECT_EQ(uidx, 0); + // back off + setAndRead(1, true); + setAndRead(0, true); + EXPECT_EQ(uidx, 0); + // go all the way + setAndRead(0, false); + setAndRead(1, false); + setAndRead(0, true); + setAndRead(1, true); + // should result in 1 update + EXPECT_EQ(uidx, 1); + EXPECT_EQ(updates[0].index, 0); + EXPECT_EQ(updates[0].clockwise, true); +} diff --git a/quantum/encoder/tests/encoder_tests_split.cpp b/quantum/encoder/tests/encoder_tests_split.cpp new file mode 100644 index 0000000000..25e52c83f9 --- /dev/null +++ b/quantum/encoder/tests/encoder_tests_split.cpp @@ -0,0 +1,143 @@ +/* Copyright 2021 Balz Guenat + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "gtest/gtest.h" +#include "gmock/gmock.h" +#include <vector> +#include <algorithm> +#include <stdio.h> + +extern "C" { +#include "encoder.h" +#include "encoder/tests/mock_split.h" +} + +struct update { + int8_t index; + bool clockwise; +}; + +uint8_t uidx = 0; +update updates[32]; + +bool isLeftHand; + +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!isLeftHand) { + // this method has no effect on slave half + printf("ignoring update on right hand (%d,%s)\n", index, clockwise ? "CW" : "CC"); + return true; + } + updates[uidx % 32] = {index, clockwise}; + uidx++; + return true; +} + +bool setAndRead(pin_t pin, bool val) { + setPin(pin, val); + return encoder_read(); +} + +class EncoderTest : public ::testing::Test { + protected: + void SetUp() override { + uidx = 0; + for (int i = 0; i < 32; i++) { + pinIsInputHigh[i] = 0; + pins[i] = 0; + } + } +}; + +TEST_F(EncoderTest, TestInitLeft) { + isLeftHand = true; + encoder_init(); + EXPECT_EQ(pinIsInputHigh[0], true); + EXPECT_EQ(pinIsInputHigh[1], true); + EXPECT_EQ(pinIsInputHigh[2], false); + EXPECT_EQ(pinIsInputHigh[3], false); + EXPECT_EQ(uidx, 0); +} + +TEST_F(EncoderTest, TestInitRight) { + isLeftHand = false; + encoder_init(); + EXPECT_EQ(pinIsInputHigh[0], false); + EXPECT_EQ(pinIsInputHigh[1], false); + EXPECT_EQ(pinIsInputHigh[2], true); + EXPECT_EQ(pinIsInputHigh[3], true); + EXPECT_EQ(uidx, 0); +} + +TEST_F(EncoderTest, TestOneClockwiseLeft) { + isLeftHand = true; + encoder_init(); + // send 4 pulses. with resolution 4, that's one step and we should get 1 update. + setAndRead(0, false); + setAndRead(1, false); + setAndRead(0, true); + setAndRead(1, true); + + EXPECT_EQ(uidx, 1); + EXPECT_EQ(updates[0].index, 0); + EXPECT_EQ(updates[0].clockwise, true); +} + +TEST_F(EncoderTest, TestOneClockwiseRightSent) { + isLeftHand = false; + encoder_init(); + // send 4 pulses. with resolution 4, that's one step and we should get 1 update. + setAndRead(2, false); + setAndRead(3, false); + setAndRead(2, true); + setAndRead(3, true); + + uint8_t slave_state[2] = {0}; + encoder_state_raw(slave_state); + + EXPECT_EQ((int8_t)slave_state[0], -1); +} + +/* this test will not work after the previous test. + * this is due to encoder_value[1] already being set to -1 when simulating the right half. + * When we now receive this update acting as the left half, there is no change. + * This is hard to mock, as the static values inside encoder.c normally exist twice, once on each half, + * but here, they only exist once. + */ + +// TEST_F(EncoderTest, TestOneClockwiseRightReceived) { +// isLeftHand = true; +// encoder_init(); + +// uint8_t slave_state[2] = {255, 0}; +// encoder_update_raw(slave_state); + +// EXPECT_EQ(uidx, 1); +// EXPECT_EQ(updates[0].index, 1); +// EXPECT_EQ(updates[0].clockwise, true); +// } + +TEST_F(EncoderTest, TestOneCounterClockwiseRightReceived) { + isLeftHand = true; + encoder_init(); + + uint8_t slave_state[2] = {0, 0}; + encoder_update_raw(slave_state); + + EXPECT_EQ(uidx, 1); + EXPECT_EQ(updates[0].index, 1); + EXPECT_EQ(updates[0].clockwise, false); +} diff --git a/quantum/encoder/tests/mock.c b/quantum/encoder/tests/mock.c new file mode 100644 index 0000000000..d0506a938f --- /dev/null +++ b/quantum/encoder/tests/mock.c @@ -0,0 +1,34 @@ +/* Copyright 2021 Balz Guenat + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "mock.h" + +bool pins[32] = {0}; +bool pinIsInputHigh[32] = {0}; + +uint8_t mockSetPinInputHigh(pin_t pin) { + // dprintf("Setting pin %d input high.", pin); + pins[pin] = true; + pinIsInputHigh[pin] = true; + return 0; +} + +bool mockReadPin(pin_t pin) { return pins[pin]; } + +bool setPin(pin_t pin, bool val) { + pins[pin] = val; + return val; +} diff --git a/quantum/encoder/tests/mock.h b/quantum/encoder/tests/mock.h new file mode 100644 index 0000000000..dbc25a0846 --- /dev/null +++ b/quantum/encoder/tests/mock.h @@ -0,0 +1,40 @@ +/* Copyright 2021 Balz Guenat + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include <stdint.h> +#include <stdbool.h> + +/* Here, "pins" from 0 to 31 are allowed. */ +#define ENCODERS_PAD_A \ + { 0 } +#define ENCODERS_PAD_B \ + { 1 } + +typedef uint8_t pin_t; + +extern bool pins[]; +extern bool pinIsInputHigh[]; + +#define setPinInputHigh(pin) (mockSetPinInputHigh(pin)) +#define readPin(pin) (mockReadPin(pin)) + +uint8_t mockSetPinInputHigh(pin_t pin); + +bool mockReadPin(pin_t pin); + +bool setPin(pin_t pin, bool val); diff --git a/quantum/encoder/tests/mock_split.c b/quantum/encoder/tests/mock_split.c new file mode 100644 index 0000000000..68bf3af599 --- /dev/null +++ b/quantum/encoder/tests/mock_split.c @@ -0,0 +1,36 @@ +/* Copyright 2021 Balz Guenat + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "mock_split.h" + +bool pins[32] = {0}; +bool pinIsInputHigh[32] = {0}; + +uint8_t mockSetPinInputHigh(pin_t pin) { + // dprintf("Setting pin %d input high.", pin); + pins[pin] = true; + pinIsInputHigh[pin] = true; + return 0; +} + +bool mockReadPin(pin_t pin) { return pins[pin]; } + +bool setPin(pin_t pin, bool val) { + pins[pin] = val; + return val; +} + +void last_encoder_activity_trigger(void) {} diff --git a/quantum/encoder/tests/mock_split.h b/quantum/encoder/tests/mock_split.h new file mode 100644 index 0000000000..0ae62652f9 --- /dev/null +++ b/quantum/encoder/tests/mock_split.h @@ -0,0 +1,48 @@ +/* Copyright 2021 Balz Guenat + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include <stdint.h> +#include <stdbool.h> + +#define SPLIT_KEYBOARD +/* Here, "pins" from 0 to 31 are allowed. */ +#define ENCODERS_PAD_A \ + { 0 } +#define ENCODERS_PAD_B \ + { 1 } +#define ENCODERS_PAD_A_RIGHT \ + { 2 } +#define ENCODERS_PAD_B_RIGHT \ + { 3 } + +typedef uint8_t pin_t; +extern bool isLeftHand; +void encoder_state_raw(uint8_t* slave_state); +void encoder_update_raw(uint8_t* slave_state); + +extern bool pins[]; +extern bool pinIsInputHigh[]; + +#define setPinInputHigh(pin) (mockSetPinInputHigh(pin)) +#define readPin(pin) (mockReadPin(pin)) + +uint8_t mockSetPinInputHigh(pin_t pin); + +bool mockReadPin(pin_t pin); + +bool setPin(pin_t pin, bool val); diff --git a/quantum/encoder/tests/rules.mk b/quantum/encoder/tests/rules.mk new file mode 100644 index 0000000000..b826ce3aed --- /dev/null +++ b/quantum/encoder/tests/rules.mk @@ -0,0 +1,13 @@ +encoder_DEFS := -DENCODER_MOCK_SINGLE + +encoder_SRC := \ + $(QUANTUM_PATH)/encoder/tests/mock.c \ + $(QUANTUM_PATH)/encoder/tests/encoder_tests.cpp \ + $(QUANTUM_PATH)/encoder.c + +encoder_split_DEFS := -DENCODER_MOCK_SPLIT + +encoder_split_SRC := \ + $(QUANTUM_PATH)/encoder/tests/mock_split.c \ + $(QUANTUM_PATH)/encoder/tests/encoder_tests_split.cpp \ + $(QUANTUM_PATH)/encoder.c diff --git a/quantum/encoder/tests/testlist.mk b/quantum/encoder/tests/testlist.mk new file mode 100644 index 0000000000..1be9f4a054 --- /dev/null +++ b/quantum/encoder/tests/testlist.mk @@ -0,0 +1,3 @@ +TEST_LIST += \ + encoder \ + encoder_split diff --git a/quantum/split_common/transport.h b/quantum/split_common/transport.h index 1d4f6ed0cd..ab65ff56db 100644 --- a/quantum/split_common/transport.h +++ b/quantum/split_common/transport.h @@ -42,7 +42,11 @@ bool transport_execute_transaction(int8_t id, const void *initiator2target_buf, #ifdef ENCODER_ENABLE # include "encoder.h" -# define NUMBER_OF_ENCODERS (sizeof((pin_t[])ENCODERS_PAD_A) / sizeof(pin_t)) +// if no pads for right half are defined, we assume the keyboard is symmetric (i.e. same pads) +# ifndef ENCODERS_PAD_A_RIGHT +# define ENCODERS_PAD_A_RIGHT ENCODERS_PAD_A +# endif +# define NUMBER_OF_ENCODERS ((sizeof((pin_t[])ENCODERS_PAD_A) + (sizeof((pin_t[])ENCODERS_PAD_A_RIGHT)) / sizeof(pin_t)) #endif // ENCODER_ENABLE #ifdef BACKLIGHT_ENABLE diff --git a/testlist.mk b/testlist.mk index faff4d201c..cff784dad6 100644 --- a/testlist.mk +++ b/testlist.mk @@ -2,6 +2,7 @@ TEST_LIST = $(notdir $(patsubst %/rules.mk,%,$(wildcard $(ROOT_DIR)/tests/*/rule FULL_TESTS := $(TEST_LIST) include $(QUANTUM_PATH)/debounce/tests/testlist.mk +include $(QUANTUM_PATH)/encoder/tests/testlist.mk include $(QUANTUM_PATH)/sequencer/tests/testlist.mk include $(PLATFORM_PATH)/test/testlist.mk From 5c2052fd476cb1d15eab66c23016a1add93f6767 Mon Sep 17 00:00:00 2001 From: Stefan Kerkmann <karlk90@pm.me> Date: Sat, 20 Nov 2021 21:04:16 +0100 Subject: [PATCH 548/595] [Core] RISC-V toolchain and picolibc fixes (#15109) * [Core] Fix RISC-V toolchain installation The risc-v toolchain is only available on distributions based on Debian 11+ so we check for their availability before installing them. * [Core] Fix heap symbols and syscalls for picolibc picolibc internally uses __heap_start and __heap_end instead of the defacto chibios linker script standard __heap_base__ and __heap_end__ therefore we introduce these symbols as an alias. Usually all memory used within QMK is statically allocated, but some algorithms make usage of malloc and friends. Also the timeval struct is not defined by picolibc for syscalls, therefore it is declared as stub. --- platforms/chibios/platform.mk | 19 +++++++++++-------- platforms/chibios/syscall-fallbacks.c | 1 + util/install/debian.sh | 14 ++++++++++---- 3 files changed, 22 insertions(+), 12 deletions(-) diff --git a/platforms/chibios/platform.mk b/platforms/chibios/platform.mk index 6b298732c2..1c8d430074 100644 --- a/platforms/chibios/platform.mk +++ b/platforms/chibios/platform.mk @@ -316,7 +316,7 @@ endif # # Use defined stack sizes of the main thread in linker scripts -LDSYMBOLS =--defsym=__process_stack_size__=$(USE_PROCESS_STACKSIZE),--defsym=__main_stack_size__=$(USE_EXCEPTIONS_STACKSIZE) +SHARED_LDSYMBOLS = -Wl,--defsym=__process_stack_size__=$(USE_PROCESS_STACKSIZE),--defsym=__main_stack_size__=$(USE_EXCEPTIONS_STACKSIZE) # Shared Compiler flags for all toolchains SHARED_CFLAGS = -fomit-frame-pointer \ @@ -327,7 +327,6 @@ SHARED_CFLAGS = -fomit-frame-pointer \ # Shared Linker flags for all toolchains SHARED_LDFLAGS = -T $(LDSCRIPT) \ - -Wl,$(LDSYMBOLS) \ -Wl,--gc-sections \ -nostartfiles @@ -346,14 +345,18 @@ ifeq ($(strip $(MCU)), risc-v) endif endif - # Default to compiling with picolibc for RISC-V targets if available, - # which is available by default on current (bullseye) debian based systems. + # Default to compiling with picolibc for RISC-V targets if available, which + # is available by default on distributions based on Debian 11+. ifeq ($(shell $(TOOLCHAIN)gcc --specs=picolibc.specs -E - 2>/dev/null >/dev/null </dev/null ; echo $$?),0) - # Toolchain specific Compiler flags - # Note that we still link with our own linker script - # by providing it via the -T flag above. + # Toolchain specific Compiler flags Note that we still link with our own + # linker script by providing it via the -T flag in SHARED_LDFLAGS. TOOLCHAIN_CFLAGS = --specs=picolibc.specs + # picolibc internally uses __heap_start and __heap_end instead of the + # defacto chibios linker script standard __heap_base__ and __heap_end__ + # therefore we introduce these symbols as an alias. + TOOLCHAIN_LDSYMBOLS = -Wl,--defsym=__heap_start=__heap_base__,--defsym=__heap_end=__heap_end__ + # Tell QMK that we are compiling with picolibc. OPT_DEFS += -DUSE_PICOLIBC endif @@ -404,7 +407,7 @@ CFLAGS += $(SHARED_CFLAGS) $(TOOLCHAIN_CFLAGS) CXXFLAGS += $(CFLAGS) $(SHARED_CXXFLAGS) $(TOOLCHAIN_CXXFLAGS) -fno-rtti # Linker flags -LDFLAGS += $(SHARED_LDFLAGS) $(TOOLCHAIN_LDFLAGS) $(MCUFLAGS) +LDFLAGS += $(SHARED_LDFLAGS) $(SHARED_LDSYMBOLS) $(TOOLCHAIN_LDFLAGS) $(TOOLCHAIN_LDSYMBOLS) $(MCUFLAGS) # Tell QMK that we are hosting it on ChibiOS. OPT_DEFS += -DPROTOCOL_CHIBIOS diff --git a/platforms/chibios/syscall-fallbacks.c b/platforms/chibios/syscall-fallbacks.c index 4569879c7c..7150a46326 100644 --- a/platforms/chibios/syscall-fallbacks.c +++ b/platforms/chibios/syscall-fallbacks.c @@ -22,6 +22,7 @@ * the _reent struct has to be defined. */ #if defined(USE_PICOLIBC) struct _reent; +struct timeval; #endif #pragma GCC diagnostic ignored "-Wmissing-prototypes" diff --git a/util/install/debian.sh b/util/install/debian.sh index 2a188334b6..3e02919bdd 100755 --- a/util/install/debian.sh +++ b/util/install/debian.sh @@ -11,12 +11,18 @@ _qmk_install_prepare() { _qmk_install() { echo "Installing dependencies" - sudo apt-get -yq install \ + sudo apt-get --quiet --yes install \ build-essential clang-format diffutils gcc git unzip wget zip \ python3-pip binutils-avr gcc-avr avr-libc binutils-arm-none-eabi \ gcc-arm-none-eabi libnewlib-arm-none-eabi avrdude dfu-programmer \ - dfu-util teensy-loader-cli libhidapi-hidraw0 libusb-dev \ - picolibc-riscv64-unknown-elf gcc-riscv64-unknown-elf binutils-riscv64-unknown-elf + dfu-util teensy-loader-cli libhidapi-hidraw0 libusb-dev - python3 -m pip install --user -r $QMK_FIRMWARE_DIR/requirements.txt + # RISC-V toolchains with picolibc support are only available for distributions based on Debian 11+. + if sudo apt-get install --simulate --quiet --yes picolibc-riscv64-unknown-elf gcc-riscv64-unknown-elf binutils-riscv64-unknown-elf > /dev/null 2>&1; then + sudo apt-get --quiet --yes install picolibc-riscv64-unknown-elf \ + gcc-riscv64-unknown-elf \ + binutils-riscv64-unknown-elf + fi + + python3 -m pip install --user -r "$QMK_FIRMWARE_DIR"/requirements.txt } From 06f18e22d9aff0afa4dce101a6a1b2cae5511365 Mon Sep 17 00:00:00 2001 From: Balz Guenat <balz.guenat@gmail.com> Date: Sat, 20 Nov 2021 21:09:21 +0100 Subject: [PATCH 549/595] fix broken macro in transport.h (#15239) --- quantum/split_common/transport.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/quantum/split_common/transport.h b/quantum/split_common/transport.h index ab65ff56db..437d4bc1f6 100644 --- a/quantum/split_common/transport.h +++ b/quantum/split_common/transport.h @@ -41,12 +41,13 @@ void transport_slave(matrix_row_t master_matrix[], matrix_row_t slave_matrix[]); bool transport_execute_transaction(int8_t id, const void *initiator2target_buf, uint16_t initiator2target_length, void *target2initiator_buf, uint16_t target2initiator_length); #ifdef ENCODER_ENABLE +# include "gpio.h" # include "encoder.h" // if no pads for right half are defined, we assume the keyboard is symmetric (i.e. same pads) # ifndef ENCODERS_PAD_A_RIGHT # define ENCODERS_PAD_A_RIGHT ENCODERS_PAD_A # endif -# define NUMBER_OF_ENCODERS ((sizeof((pin_t[])ENCODERS_PAD_A) + (sizeof((pin_t[])ENCODERS_PAD_A_RIGHT)) / sizeof(pin_t)) +# define NUMBER_OF_ENCODERS ((sizeof((pin_t[])ENCODERS_PAD_A) + sizeof((pin_t[])ENCODERS_PAD_A_RIGHT)) / sizeof(pin_t)) #endif // ENCODER_ENABLE #ifdef BACKLIGHT_ENABLE From eeab6f154ba65eddd72f5ee668d3c8871930de4a Mon Sep 17 00:00:00 2001 From: Joel Challis <git@zvecr.com> Date: Sat, 20 Nov 2021 22:00:46 +0000 Subject: [PATCH 550/595] Short term bodge for PRODUCT warning (#15240) --- data/mappings/info_config.json | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/data/mappings/info_config.json b/data/mappings/info_config.json index f1e06dfea1..50694e3863 100644 --- a/data/mappings/info_config.json +++ b/data/mappings/info_config.json @@ -68,7 +68,7 @@ "RGBLIGHT_SLEEP": {"info_key": "rgblight.sleep", "value_type": "bool"}, "RGBLIGHT_SPLIT": {"info_key": "rgblight.split", "value_type": "bool"}, "RGBW": {"info_key": "rgblight.rgbw", "value_type": "bool"}, - "PRODUCT": {"info_key": "keyboard_name"}, + "PRODUCT": {"info_key": "keyboard_name", "warn_duplicate": false}, "PRODUCT_ID": {"info_key": "usb.pid", "value_type": "hex"}, "VENDOR_ID": {"info_key": "usb.vid", "value_type": "hex"}, "QMK_ESC_OUTPUT": {"info_key": "qmk_lufa_bootloader.esc_output"}, From 2d71ac7541e81ae4313cecc7e7597d45f9a96809 Mon Sep 17 00:00:00 2001 From: Sergey Vlasov <sigprof@gmail.com> Date: Sun, 21 Nov 2021 01:01:22 +0300 Subject: [PATCH 551/595] Add Keyboardio Atreus 2 Bootloader to udev rules (#15241) The Keyboardio Atreus 2 Bootloader is a clone of the Caterina bootloader with different USB VID:PID values (1209:2302): https://github.com/keyboardio/Atreus2-Bootloader --- util/udev/50-qmk.rules | 3 +++ 1 file changed, 3 insertions(+) diff --git a/util/udev/50-qmk.rules b/util/udev/50-qmk.rules index db27d4dc81..57806f9df0 100644 --- a/util/udev/50-qmk.rules +++ b/util/udev/50-qmk.rules @@ -33,6 +33,9 @@ SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="05dc", TAG+="uacc SUBSYSTEMS=="usb", ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="6124", TAG+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" # Caterina (Pro Micro) +## pid.codes shared PID +### Keyboardio Atreus 2 Bootloader +SUBSYSTEMS=="usb", ATTRS{idVendor}=="1209", ATTRS{idProduct}=="2302", TAG+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" ## Spark Fun Electronics ### Pro Micro 3V3/8MHz SUBSYSTEMS=="usb", ATTRS{idVendor}=="1b4f", ATTRS{idProduct}=="9203", TAG+="uaccess", ENV{ID_MM_DEVICE_IGNORE}="1" From 739bf6211227254db5f8786df0c57f257d72cc78 Mon Sep 17 00:00:00 2001 From: Joel Challis <git@zvecr.com> Date: Sat, 20 Nov 2021 22:45:12 +0000 Subject: [PATCH 552/595] Tidy CI format error message (#15242) * Tidy format error message --- .github/workflows/format.yaml | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/.github/workflows/format.yaml b/.github/workflows/format.yaml index 645e0ce106..2a309e0afd 100644 --- a/.github/workflows/format.yaml +++ b/.github/workflows/format.yaml @@ -39,11 +39,12 @@ jobs: qmk format-c --core-only $(< ~/files.txt) qmk format-python $(< ~/files.txt) qmk format-text $(< ~/files.txt) - git diff - name: Fail when formatting required run: | + git diff for file in $(git diff --name-only); do - echo "::error file=${file}::::File Requires Formatting" + echo "File '${file}' Requires Formatting" + echo "::error file=${file}::Requires Formatting" done test -z "$(git diff --name-only)" From c491af01d537e444f32f68520ebcce0e39d71d13 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Sun, 21 Nov 2021 22:16:37 +0000 Subject: [PATCH 553/595] MW75 Layout Macro Refactor (#15247) * mw75.h: use QMK 3-character matrix identifiers * update stock keymaps Use QMK-native keycode aliases, and update grid alignment of keycodes. * mw75.h: add matrix diagram * info.json: apply friendly formatting * move rotary encoder keycodes to top row * info.json: update maintainer field Use the maintainer's GitHub username. --- keyboards/mwstudio/mw75/info.json | 52 +++++++++---------- .../mwstudio/mw75/keymaps/default/keymap.c | 49 ++++++++--------- keyboards/mwstudio/mw75/keymaps/via/keymap.c | 49 ++++++++--------- keyboards/mwstudio/mw75/mw75.h | 45 +++++++++++----- 4 files changed, 108 insertions(+), 87 deletions(-) diff --git a/keyboards/mwstudio/mw75/info.json b/keyboards/mwstudio/mw75/info.json index 0c53689865..2eabde1495 100644 --- a/keyboards/mwstudio/mw75/info.json +++ b/keyboards/mwstudio/mw75/info.json @@ -1,7 +1,7 @@ { "keyboard_name": "MW75", "url": "", - "maintainer": "qmk", + "maintainer": "TW59420", "layouts": { "LAYOUT": { "layout": [ @@ -18,21 +18,23 @@ {"label":"F10", "x":11.5, "y":0}, {"label":"F11", "x":12.5, "y":0}, {"label":"F12", "x":13.5, "y":0}, - {"label":"DEL", "x":15, "y":0}, + {"label":"Encoder CCW", "x":15, "y":0, "w":0.5}, + {"label":"Encoder Click", "x":15.5, "y":0}, + {"label":"Encoder CW", "x":16.5, "y":0, "w":0.5}, - {"label":"`", "x":0, "y":1.5}, - {"label":"1", "x":1, "y":1.5}, - {"label":"2", "x":2, "y":1.5}, - {"label":"3", "x":3, "y":1.5}, - {"label":"4", "x":4, "y":1.5}, - {"label":"5", "x":5, "y":1.5}, - {"label":"6", "x":6, "y":1.5}, - {"label":"7", "x":7, "y":1.5}, - {"label":"8", "x":8, "y":1.5}, - {"label":"9", "x":9, "y":1.5}, - {"label":"0", "x":10, "y":1.5}, - {"label":"-", "x":11, "y":1.5}, - {"label":"=", "x":12, "y":1.5}, + {"label":"`~", "x":0, "y":1.5}, + {"label":"1!", "x":1, "y":1.5}, + {"label":"2@", "x":2, "y":1.5}, + {"label":"3#", "x":3, "y":1.5}, + {"label":"4$", "x":4, "y":1.5}, + {"label":"5%", "x":5, "y":1.5}, + {"label":"6^", "x":6, "y":1.5}, + {"label":"7&", "x":7, "y":1.5}, + {"label":"8*", "x":8, "y":1.5}, + {"label":"9(", "x":9, "y":1.5}, + {"label":"0)", "x":10, "y":1.5}, + {"label":"-_", "x":11, "y":1.5}, + {"label":"=+", "x":12, "y":1.5}, {"label":"Backspace", "x":13, "y":1.5, "w":2}, {"label":"Delete", "x":15, "y":1.5}, @@ -47,9 +49,9 @@ {"label":"I", "x":8.5, "y":2.5}, {"label":"O", "x":9.5, "y":2.5}, {"label":"P", "x":10.5, "y":2.5}, - {"label":"[", "x":11.5, "y":2.5}, - {"label":"]", "x":12.5, "y":2.5}, - {"label":"\\", "x":13.5, "y":2.5, "w":1.5}, + {"label":"[{", "x":11.5, "y":2.5}, + {"label":"]}", "x":12.5, "y":2.5}, + {"label":"\\|", "x":13.5, "y":2.5, "w":1.5}, {"label":"PgUp", "x":15, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, @@ -62,8 +64,8 @@ {"label":"J", "x":7.75, "y":3.5}, {"label":"K", "x":8.75, "y":3.5}, {"label":"L", "x":9.75, "y":3.5}, - {"label":";", "x":10.75, "y":3.5}, - {"label":"'", "x":11.75, "y":3.5}, + {"label":";:", "x":10.75, "y":3.5}, + {"label":"'\"", "x":11.75, "y":3.5}, {"label":"Enter", "x":12.75, "y":3.5, "w":2.25}, {"label":"PgDn", "x":15, "y":3.5}, @@ -75,9 +77,9 @@ {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":7.25, "y":4.5}, {"label":"M", "x":8.25, "y":4.5}, - {"label":",", "x":9.25, "y":4.5}, - {"label":".", "x":10.25, "y":4.5}, - {"label":"/", "x":11.25, "y":4.5}, + {"label":",<", "x":9.25, "y":4.5}, + {"label":".>", "x":10.25, "y":4.5}, + {"label":"/?", "x":11.25, "y":4.5}, {"label":"Shift", "x":12.25, "y":4.5, "w":1.75}, {"label":"\u2191", "x":14, "y":4.5}, {"label":"End", "x":15, "y":4.5}, @@ -85,9 +87,7 @@ {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Win", "x":1.25, "y":5.5, "w":1.25}, {"label":"Alt", "x":2.5, "y":5.5, "w":1.25}, - {"label":"Vol-", "x":3.75, "y":5.5 }, - {"label":"Vol+", "x":4.75, "y":5.5 }, - {"x":5.75, "y":5.5, "w":4.25}, + {"label":"Space", "x":3.75, "y":5.5, "w":6.25}, {"label":"Alt", "x":10, "y":5.5, "w":1.25}, {"label":"Fn", "x":11.25, "y":5.5, "w":1.25}, {"label":"\u2190", "x":13, "y":5.5}, diff --git a/keyboards/mwstudio/mw75/keymaps/default/keymap.c b/keyboards/mwstudio/mw75/keymaps/default/keymap.c index 44eb8d0c04..12ac4ce74a 100644 --- a/keyboards/mwstudio/mw75/keymaps/default/keymap.c +++ b/keyboards/mwstudio/mw75/keymaps/default/keymap.c @@ -19,39 +19,40 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, RGB_TOG, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, - KC_LCTL, KC_LGUI, KC_LALT, KC_VOLU, KC_VOLD, KC_SPACE, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT + [0] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_VOLD, RGB_TOG, KC_VOLU, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT ), - [1] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_HUI, - RGB_TOG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_HUD, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_SAI, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAI, RGB_SAD, - _______, _______, _______, _______, _______, _______, RGB_MOD, _______, RGB_SPD, RGB_VAD, RGB_SPI + [1] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_HUI, + RGB_TOG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_HUD, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_SAI, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAI, RGB_SAD, + _______, _______, _______, _______, RGB_MOD, _______, RGB_SPD, RGB_VAD, RGB_SPI ), - [2] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + [2] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ ), - [3] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + [3] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ ), + }; diff --git a/keyboards/mwstudio/mw75/keymaps/via/keymap.c b/keyboards/mwstudio/mw75/keymaps/via/keymap.c index 44eb8d0c04..12ac4ce74a 100644 --- a/keyboards/mwstudio/mw75/keymaps/via/keymap.c +++ b/keyboards/mwstudio/mw75/keymaps/via/keymap.c @@ -19,39 +19,40 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, RGB_TOG, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, - KC_LCTL, KC_LGUI, KC_LALT, KC_VOLU, KC_VOLD, KC_SPACE, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT + [0] = LAYOUT( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_VOLD, RGB_TOG, KC_VOLU, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT ), - [1] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_HUI, - RGB_TOG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_HUD, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_SAI, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAI, RGB_SAD, - _______, _______, _______, _______, _______, _______, RGB_MOD, _______, RGB_SPD, RGB_VAD, RGB_SPI + [1] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_HUI, + RGB_TOG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_HUD, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_SAI, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAI, RGB_SAD, + _______, _______, _______, _______, RGB_MOD, _______, RGB_SPD, RGB_VAD, RGB_SPI ), - [2] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + [2] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ ), - [3] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + [3] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ ), + }; diff --git a/keyboards/mwstudio/mw75/mw75.h b/keyboards/mwstudio/mw75/mw75.h index a322ed4a1b..c6542fc57a 100644 --- a/keyboards/mwstudio/mw75/mw75.h +++ b/keyboards/mwstudio/mw75/mw75.h @@ -18,19 +18,38 @@ #include "quantum.h" +#define XXX KC_NO + +/* 54 ◯ 53 + * ┌───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┬───┬───┬───┐ ┌───┐ + * │01 │ │02 │03 │04 │05 │ │06 │07 │08 │09 │ │0A │0B │0C │0D │ │0E │ + * └───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┴───┴───┴───┘ └───┘ + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐ + * │10 │11 │12 │13 │14 │15 │16 │17 │18 │19 │1A │1B │1C │1D │1E │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤ + * │20 │21 │22 │23 │24 │25 │26 │27 │28 │29 │2A │2B │2C │2D │2E │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤ + * │30 │31 │32 │33 │34 │35 │36 │37 │38 │39 │3A │3B │3D │3E │ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤ + * │40 │42 │43 │44 │45 │46 │47 │48 │49 │4A │4B │4C │4D │4E │ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤ + * │50 │51 │52 │56 │5A │5B │ │5C │5D │5E │ + * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘ + */ + #define LAYOUT( \ - K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014,\ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114,\ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214,\ - K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K314,\ - K400, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414,\ - K500, K501, K502, K503, K504, K506, K510, K511, K512, K513, K514\ + K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K54, K0E, K53, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3D, K3E, \ + K40, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E, \ + K50, K51, K52, K56, K5A, K5B, K5C, K5D, K5E \ ) { \ - { KC_NO, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 },\ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 },\ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214 },\ - { K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, K314 },\ - { K400, KC_NO, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414 },\ - { K500, K501, K502, K503, K504, KC_NO, K506, KC_NO, KC_NO, KC_NO, K510, K511, K512, K513, K514 },\ - { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO } \ + { XXX, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, K2E }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, XXX, K3D, K3E }, \ + { K40, XXX, K42, K43, K44, K45, K46, K47, K48, K49, K4A, K4B, K4C, K4D, K4E }, \ + { K50, K51, K52, K53, K54, XXX, K56, XXX, XXX, XXX, K5A, K5B, K5C, K5D, K5E }, \ + { XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX } \ } From debb0ecb5da7bfd5f8b6b2f76d1d68c070073543 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Sun, 21 Nov 2021 22:21:20 +0000 Subject: [PATCH 554/595] MW65 RGB Layout Macro Refactor (#15246) * mw65_rgb.h: use QMK 3-character notation for matrix identifiers * mw65_rgb.h: add matrix diagram * info.json: apply friendly formatting Update key labels for QMK CLI rendering. * move rotary encoder keycodes to top row * info.json: update maintainer field Use the maintainer's GitHub username. --- keyboards/mwstudio/mw65_rgb/info.json | 52 +++++++++---------- .../mw65_rgb/keymaps/default/keymap.c | 30 +++++------ .../mwstudio/mw65_rgb/keymaps/via/keymap.c | 32 ++++++------ keyboards/mwstudio/mw65_rgb/mw65_rgb.h | 38 ++++++++++---- 4 files changed, 84 insertions(+), 68 deletions(-) diff --git a/keyboards/mwstudio/mw65_rgb/info.json b/keyboards/mwstudio/mw65_rgb/info.json index affcdadbc0..870a848b85 100644 --- a/keyboards/mwstudio/mw65_rgb/info.json +++ b/keyboards/mwstudio/mw65_rgb/info.json @@ -1,25 +1,27 @@ { "keyboard_name": "MW65_RGB", "url": "", - "maintainer": "qmk", + "maintainer": "TW59420", "layouts": { "LAYOUT": { "layout": [ - {"label":"ESC", "x":0, "y":0}, - {"label":"1", "x":1, "y":0}, - {"label":"2", "x":2, "y":0}, - {"label":"3", "x":3, "y":0}, - {"label":"4", "x":4, "y":0}, - {"label":"5", "x":5, "y":0}, - {"label":"6", "x":6, "y":0}, - {"label":"7", "x":7, "y":0}, - {"label":"8", "x":8, "y":0}, - {"label":"9", "x":9, "y":0}, - {"label":"0", "x":10, "y":0}, - {"label":"-", "x":11, "y":0}, - {"label":"=", "x":12, "y":0}, + {"label":"Esc", "x":0, "y":0}, + {"label":"1!", "x":1, "y":0}, + {"label":"2@", "x":2, "y":0}, + {"label":"3#", "x":3, "y":0}, + {"label":"4$", "x":4, "y":0}, + {"label":"5%", "x":5, "y":0}, + {"label":"6^", "x":6, "y":0}, + {"label":"7&", "x":7, "y":0}, + {"label":"8*", "x":8, "y":0}, + {"label":"9(", "x":9, "y":0}, + {"label":"0)", "x":10, "y":0}, + {"label":"-_", "x":11, "y":0}, + {"label":"=+", "x":12, "y":0}, {"label":"Backspace", "x":13, "y":0, "w":2}, - {"label":"Delete", "x":15, "y":0}, + {"label":"Encoder CCW", "x":15, "y":0, "w":0.5}, + {"label":"Delete", "x":15.5, "y":0}, + {"label":"Encoder CW", "x":16.5, "y":0, "w":0.5}, {"label":"Tab", "x":0, "y":1, "w":1.5}, {"label":"Q", "x":1.5, "y":1}, @@ -32,9 +34,9 @@ {"label":"I", "x":8.5, "y":1}, {"label":"O", "x":9.5, "y":1}, {"label":"P", "x":10.5, "y":1}, - {"label":"[", "x":11.5, "y":1}, - {"label":"]", "x":12.5, "y":1}, - {"label":"\\", "x":13.5, "y":1, "w":1.5}, + {"label":"[{", "x":11.5, "y":1}, + {"label":"]}", "x":12.5, "y":1}, + {"label":"\\|", "x":13.5, "y":1, "w":1.5}, {"label":"PgUp", "x":15, "y":1}, {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, @@ -47,8 +49,8 @@ {"label":"J", "x":7.75, "y":2}, {"label":"K", "x":8.75, "y":2}, {"label":"L", "x":9.75, "y":2}, - {"label":";", "x":10.75, "y":2}, - {"label":"'", "x":11.75, "y":2}, + {"label":";:", "x":10.75, "y":2}, + {"label":"'\"", "x":11.75, "y":2}, {"label":"Enter", "x":12.75, "y":2, "w":2.25}, {"label":"PgDn", "x":15, "y":2}, @@ -60,9 +62,9 @@ {"label":"B", "x":6.25, "y":3}, {"label":"N", "x":7.25, "y":3}, {"label":"M", "x":8.25, "y":3}, - {"label":",", "x":9.25, "y":3}, - {"label":".", "x":10.25, "y":3}, - {"label":"/", "x":11.25, "y":3}, + {"label":",<", "x":9.25, "y":3}, + {"label":".>", "x":10.25, "y":3}, + {"label":"/?", "x":11.25, "y":3}, {"label":"Shift", "x":12.25, "y":3, "w":1.75}, {"label":"\u2191", "x":14, "y":3}, {"label":"End", "x":15, "y":3}, @@ -70,9 +72,7 @@ {"label":"Ctrl", "x":0, "y":4, "w":1.25}, {"label":"Win", "x":1.25, "y":4, "w":1.25}, {"label":"Alt", "x":2.5, "y":4, "w":1.25}, - {"label":"Vol-", "x":3.75, "y":4 }, - {"label":"Vol+", "x":4.75, "y":4 }, - {"x":5.75, "y":4, "w":4.25}, + {"label":"Space", "x":3.75, "y":4, "w":6.25}, {"label":"Alt", "x":10, "y":4, "w":1.25}, {"label":"Fn", "x":11.25, "y":4, "w":1.25}, {"label":"\u2190", "x":13, "y":4}, diff --git a/keyboards/mwstudio/mw65_rgb/keymaps/default/keymap.c b/keyboards/mwstudio/mw65_rgb/keymaps/default/keymap.c index 9466b0f283..7028a223c5 100644 --- a/keyboards/mwstudio/mw65_rgb/keymaps/default/keymap.c +++ b/keyboards/mwstudio/mw65_rgb/keymaps/default/keymap.c @@ -18,34 +18,34 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, RGB_TOG, - KC_LCTL, KC_LGUI, KC_LALT, KC_VOLU, KC_VOLD, KC_SPACE, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_VOLD, KC_DEL, KC_VOLU, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, RGB_TOG, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT ), [1] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, RGB_HUI, + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, RGB_HUI, _______, RGB_TOG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_HUD, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_SAI, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_VAI, RGB_SAD, - _______, _______, _______, _______, _______, _______, RGB_MOD, _______, RGB_SPD, RGB_VAD, RGB_SPI + _______, _______, _______, _______, RGB_MOD, _______, RGB_SPD, RGB_VAD, RGB_SPI ), [2] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ ), [3] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ ), }; diff --git a/keyboards/mwstudio/mw65_rgb/keymaps/via/keymap.c b/keyboards/mwstudio/mw65_rgb/keymaps/via/keymap.c index 6506433998..78a17233e3 100644 --- a/keyboards/mwstudio/mw65_rgb/keymaps/via/keymap.c +++ b/keyboards/mwstudio/mw65_rgb/keymaps/via/keymap.c @@ -29,35 +29,35 @@ user_config_t user_config; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { [0] = LAYOUT( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_DEL, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, RGB_TOG, - KC_LCTL, KC_LGUI, KC_LALT, KC_VOLU, KC_VOLD, KC_SPACE, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RIGHT + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_VOLD, KC_DEL, KC_VOLU, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, RGB_TOG, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT ), [1] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, RGB_HUI, + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, RGB_HUI, _______, RGB_TOG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RGB_HUD, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, USER00, RGB_SAI, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, USER01, RGB_VAI, RGB_SAD, - _______, _______, _______, _______, _______, _______, RGB_MOD, _______, RGB_SPD, RGB_VAD, RGB_SPI + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, USER01, RGB_VAI, RGB_SAD, + _______, _______, _______, _______, RGB_MOD, _______, RGB_SPD, RGB_VAD, RGB_SPI ), [2] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ ), [3] = LAYOUT( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ ), }; diff --git a/keyboards/mwstudio/mw65_rgb/mw65_rgb.h b/keyboards/mwstudio/mw65_rgb/mw65_rgb.h index b491e324e2..fb769eda08 100644 --- a/keyboards/mwstudio/mw65_rgb/mw65_rgb.h +++ b/keyboards/mwstudio/mw65_rgb/mw65_rgb.h @@ -17,17 +17,33 @@ #include "quantum.h" +#define XXX KC_NO + +/* 44 ◯ 43 + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐ + * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0A │0B │0C │0D │0E │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤ + * │10 │11 │12 │13 │14 │15 │16 │17 │18 │19 │1A │1B │1C │1D │1E │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤ + * │20 │21 │22 │23 │24 │25 │26 │27 │28 │29 │2A │2B │2D │2E │ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤ + * │30 │32 │33 │34 │35 │36 │37 │38 │39 │3A │3B │3C │3D │3E │ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤ + * │40 │41 │42 │46 │4A │4B │ │4C │4D │4E │ + * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘ + */ + #define LAYOUT( \ - K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, \ - K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, \ - K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K213, K214, \ - K300, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, \ - K400, K401, K402, K403, K404, K406, K410, K411, K412, K413, K414 \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K44, K0E, K43, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2D, K2E, \ + K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \ + K40, K41, K42, K46, K4A, K4B, K4C, K4D, K4E \ ) { \ - { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \ - { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114 }, \ - { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, KC_NO, K213, K214 }, \ - { K300, KC_NO, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314 }, \ - { K400, K401, K402, K403, K404, KC_NO, K406, KC_NO, KC_NO, KC_NO, K410, K411, K412, K413, K414 }, \ - { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO } \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, XXX, K2D, K2E }, \ + { K30, XXX, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \ + { K40, K41, K42, K43, K44, XXX, K46, XXX, XXX, XXX, K4A, K4B, K4C, K4D, K4E }, \ + { XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX, XXX } \ } From d1cf21bedee722e02e5af6a5e37dbc145c613716 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Sun, 21 Nov 2021 22:29:37 +0000 Subject: [PATCH 555/595] Mokey Ginkgo65 Layout Macro Refactor (#15233) * rename LAYOUT to LAYOUT_65_ansi_blocker; enable Community Layout support * refactor default keymaps Updates grid alignment of keycodes, and adds a Function layer to the default keymap. * refactor LAYOUT_iso into LAYOUT_65_iso_blocker_split_bs Adds missing KC_NUBS position, and moves Enter keycode to home row (consistent with QMK Community Layout). * remove LAYOUT_split_left_shift With the changes to LAYOUT_65_iso_blocker_split_bs, LAYOUT_split_left_shift maps all the same positions, but in a different sequence, making it redundant. * refactor LAYOUT_7u_space to LAYOUT_65_iso_blocker_tsangan_split_bs Moves Enter keycode to home row. * remove LAYOUT_split_space_1 LAYOUT_split_space_1 differs from LAYOUT_split_space_2 only in the sizes of the split spacebars, and I like the layout rendering of LAYOUT_split_space_2 better. :) * refactor LAYOUT_split_space_2 into LAYOUT_all ANSI Enter, split Backspace, split Left Shift, and Split Spacebar. * add LAYOUT_65_ansi_blocker_split_bs * add LAYOUT_65_ansi_blocker_tsangan_split_bs * add LAYOUT_65_iso_blocker * ginkgo65.h: touch-up block diagrams * info.json: use maintainer's GitHub username * bugfix layout macros Position k1D wasn't being assigned on the ISO layouts or LAYOUT_all. * rules.mk: update Community Layout support --- keyboards/mokey/ginkgo65/ginkgo65.h | 124 ++- keyboards/mokey/ginkgo65/info.json | 955 ++++++++++-------- .../mokey/ginkgo65/keymaps/default/keymap.c | 22 +- keyboards/mokey/ginkgo65/keymaps/via/keymap.c | 45 +- keyboards/mokey/ginkgo65/rules.mk | 2 + 5 files changed, 631 insertions(+), 517 deletions(-) diff --git a/keyboards/mokey/ginkgo65/ginkgo65.h b/keyboards/mokey/ginkgo65/ginkgo65.h index 72342f08bb..1594e5c793 100644 --- a/keyboards/mokey/ginkgo65/ginkgo65.h +++ b/keyboards/mokey/ginkgo65/ginkgo65.h @@ -19,7 +19,7 @@ #define XXX KC_NO -/*LAYOUT +/*LAYOUT_65_ansi_blocker * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐ * │k00│k01│k02│k03│k04│k05│k06│k07│k08│k09│k0A│k0B│k0C│ k0D │k0F│ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤ @@ -33,7 +33,7 @@ * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 */ -#define LAYOUT( \ +#define LAYOUT_65_ansi_blocker( \ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0F, \ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2D, k2E, \ @@ -47,38 +47,66 @@ { k40, k41, k42, XXX, k44, XXX, XXX, XXX, XXX, k49, k4A, XXX, k4C, k4D, k4E, XXX }, \ } -/*LAYOUT_iso +/*LAYOUT_65_ansi_blocker_split_bs * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ * │k00│k01│k02│k03│k04│k05│k06│k07│k08│k09│k0A│k0B│k0C│k0D│k0E│k0F│ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┤ - * │ k10 │k11│k12│k13│k14│k15│k16│k17│k18│k19│k1A│k1B│k1C│ K2D │k1E│ - * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ ├───┤ - * │ k20 │k21│k22│k23│k24│k25│k26│k27│k28│k29│k2A│k2B│k1D│ │k2E│ - * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┼───┤ + * │ k10 │k11│k12│k13│k14│k15│k16│k17│k18│k19│k1A│k1B│k1C│ k1D │k1E│ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤ + * │ k20 │k21│k22│k23│k24│k25│k26│k27│k28│k29│k2A│k2B│ k2D │k2E│ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤ * │ k30 │k32│k33│k34│k35│k36│k37│k38│k39│k3A│k3B│ k3C │k3D│k3E│ * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤ * │k40 │k41 │k42 │ k44 │k49 │k4A │ │k4C│k4D│k4E│ * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 */ -#define LAYOUT_iso( \ +#define LAYOUT_65_ansi_blocker_split_bs( \ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k2D, k1E, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k1D, k2E, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2D, k2E, \ k30, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ k40, k41, k42, k44, k49, k4A, k4C, k4D, k4E \ ) { \ { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k2D, k1E, XXX }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, XXX }, \ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, XXX, k2D, k2E, XXX }, \ { k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, XXX }, \ { k40, k41, k42, XXX, k44, XXX, XXX, XXX, XXX, k49, k4A, XXX, k4C, k4D, k4E, XXX }, \ } -/*LAYOUT_split_left_shift +/*LAYOUT_65_ansi_blocker_tsangan_split_bs * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ * │k00│k01│k02│k03│k04│k05│k06│k07│k08│k09│k0A│k0B│k0C│k0D│k0E│k0F│ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┤ + * │ k10 │k11│k12│k13│k14│k15│k16│k17│k18│k19│k1A│k1B│k1C│ k1D │k1E│ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤ + * │ k20 │k21│k22│k23│k24│k25│k26│k27│k28│k29│k2A│k2B│ k2D │k2E│ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤ + * │ k30 │k32│k33│k34│k35│k36│k37│k38│k39│k3A│k3B│ k3C │k3D│k3E│ + * ├─────┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴───┴──┬┴───┴┬─┬───┼───┼───┤ + * │k40 │k41│k42 │ k44 │k4A │ │k4C│k4D│k4E│ + * └─────┴───┴─────┴───────────────────────────┴─────┘ └───┴───┴───┘ + 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 +*/ +#define LAYOUT_65_ansi_blocker_tsangan_split_bs( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2D, k2E, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ + k40, k41, k42, k44, k4A, k4C, k4D, k4E \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, XXX }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, XXX, k2D, k2E, XXX }, \ + { k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, XXX }, \ + { k40, k41, k42, XXX, k44, XXX, XXX, XXX, XXX, XXX, k4A, XXX, k4C, k4D, k4E, XXX }, \ +} + +/*LAYOUT_65_iso_blocker + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐ + * │k00│k01│k02│k03│k04│k05│k06│k07│k08│k09│k0A│k0B│k0C│ k0D │k0F│ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤ * │ k10 │k11│k12│k13│k14│k15│k16│k17│k18│k19│k1A│k1B│k1C│ K2D │k1E│ * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ ├───┤ * │ k20 │k21│k22│k23│k24│k25│k26│k27│k28│k29│k2A│k2B│k1D│ │k2E│ @@ -89,21 +117,21 @@ * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 */ -#define LAYOUT_split_left_shift( \ - k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k2D, k1E, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k1D, k2E, \ +#define LAYOUT_65_iso_blocker( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0F, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1E, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k1D, k2D, k2E, \ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ k40, k41, k42, k44, k49, k4A, k4C, k4D, k4E \ ) { \ - { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k2D, k1E, XXX, }, \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, XXX, k0F }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, XXX }, \ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, XXX, k2D, k2E, XXX }, \ { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, XXX }, \ { k40, k41, k42, XXX, k44, XXX, XXX, XXX, XXX, k49, k4A, XXX, k4C, k4D, k4E, XXX }, \ } -/*LAYOUT_7u_space +/*LAYOUT_65_iso_blocker_split_bs * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ * │k00│k01│k02│k03│k04│k05│k06│k07│k08│k09│k0A│k0B│k0C│k0D│k0E│k0F│ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┤ @@ -112,26 +140,26 @@ * │ k20 │k21│k22│k23│k24│k25│k26│k27│k28│k29│k2A│k2B│k1D│ │k2E│ * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┼───┤ * │k30 │k31│k32│k33│k34│k35│k36│k37│k38│k39│k3A│k3B│ k3C │k3D│k3E│ - * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴───┴──┬┴───┴┬─┬───┼───┼───┤ - * │k40 │k41 │k42 │ k44 │k4A │ │k4C│k4D│k4E│ - * └────┴────┴────┴────────────────────────────┴─────┘ └───┴───┴───┘ + * ├────┼───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤ + * │k40 │k41 │k42 │ k44 │k49 │k4A │ │k4C│k4D│k4E│ + * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 */ -#define LAYOUT_7u_space( \ +#define LAYOUT_65_iso_blocker_split_bs( \ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k2D, k1E, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k1D, k2E, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1E, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k1D, k2D, k2E, \ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ - k40, k41, k42, k44, k4A, k4C, k4D, k4E \ + k40, k41, k42, k44, k49, k4A, k4C, k4D, k4E \ ) { \ { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k2D, k1E, XXX, }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, XXX }, \ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, XXX, k2D, k2E, XXX }, \ { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, XXX }, \ - { k40, k41, k42, XXX, k44, XXX, XXX, XXX, XXX, XXX, k4A, XXX, k4C, k4D, k4E, XXX }, \ + { k40, k41, k42, XXX, k44, XXX, XXX, XXX, XXX, k49, k4A, XXX, k4C, k4D, k4E, XXX }, \ } -/*LAYOUT_split_space_1 +/*LAYOUT_65_iso_blocker_tsangan_split_bs * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ * │k00│k01│k02│k03│k04│k05│k06│k07│k08│k09│k0A│k0B│k0C│k0D│k0E│k0F│ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┤ @@ -140,48 +168,48 @@ * │ k20 │k21│k22│k23│k24│k25│k26│k27│k28│k29│k2A│k2B│k1D│ │k2E│ * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┼───┤ * │k30 │k31│k32│k33│k34│k35│k36│k37│k38│k39│k3A│k3B│ k3C │k3D│k3E│ - * ├────┼───┴┬──┴─┬─┴───┴───┴┬──┴─┬─┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤ - * │k40 │k41 │k42 │k43 │K44 │ K46 │K49 │k4A │ │k4C│k4D│k4E│ - * └────┴────┴────┴──────────┴────┴────────┴────┴────┘ └───┴───┴───┘ + * ├────┴┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴───┴──┬┴───┴┬─┬───┼───┼───┤ + * │k40 │k41│k42 │ k44 │k4A │ │k4C│k4D│k4E│ + * └─────┴───┴─────┴───────────────────────────┴─────┘ └───┴───┴───┘ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 */ -#define LAYOUT_split_space_1( \ +#define LAYOUT_65_iso_blocker_tsangan_split_bs( \ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k2D, k1E, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k1D, k2E, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1E, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k1D, k2D, k2E, \ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ - k40, k41, k42, K43, k44, K46, K49, k4A, k4C, k4D, k4E \ + k40, k41, k42, k44, k4A, k4C, k4D, k4E \ ) { \ { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k2D, k1E, XXX, }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, XXX }, \ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, XXX, k2D, k2E, XXX }, \ { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, XXX }, \ - { k40, k41, k42, K43, k44, XXX, K46, XXX, XXX, XXX, k4A, XXX, k4C, k4D, k4E, XXX }, \ + { k40, k41, k42, XXX, k44, XXX, XXX, XXX, XXX, XXX, k4A, XXX, k4C, k4D, k4E, XXX }, \ } -/*LAYOUT_split_space_2 +/*LAYOUT_all * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ * │k00│k01│k02│k03│k04│k05│k06│k07│k08│k09│k0A│k0B│k0C│k0D│k0E│k0F│ * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┤ - * │ k10 │k11│k12│k13│k14│k15│k16│k17│k18│k19│k1A│k1B│k1C│ K2D │k1E│ - * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┐ ├───┤ - * │ k20 │k21│k22│k23│k24│k25│k26│k27│k28│k29│k2A│k2B│k1D│ │k2E│ - * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┼───┤ + * │ k10 │k11│k12│k13│k14│k15│k16│k17│k18│k19│k1A│k1B│k1C│ k1D │k1E│ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤ + * │ k20 │k21│k22│k23│k24│k25│k26│k27│k28│k29│k2A│k2B│ K2D │k2E│ + * ├────┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤ * │k30 │k31│k32│k33│k34│k35│k36│k37│k38│k39│k3A│k3B│ k3C │k3D│k3E│ * ├────┼───┴┬──┴─┬─┴───┴──┬┴───┼───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤ * │k40 │k41 │k42 │k43 │K44 │ K46 │K49 │k4A │ │k4C│k4D│k4E│ * └────┴────┴────┴────────┴────┴──────────┴────┴────┘ └───┴───┴───┘ 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 */ -#define LAYOUT_split_space_2( \ +#define LAYOUT_all( \ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, \ - k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k2D, k1E, \ - k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k1D, k2E, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2D, k2E, \ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \ - k40, k41, k42, K43, k44, K46, K49, k4A, k4C, k4D, k4E \ + k40, k41, k42, K43, k44, K46, K49, k4A, k4C, k4D, k4E \ ) { \ { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F }, \ - { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k2D, k1E, XXX, }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, XXX }, \ { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, XXX, k2D, k2E, XXX }, \ { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, XXX }, \ { k40, k41, k42, K43, k44, XXX, K46, XXX, XXX, XXX, k4A, XXX, k4C, k4D, k4E, XXX }, \ diff --git a/keyboards/mokey/ginkgo65/info.json b/keyboards/mokey/ginkgo65/info.json index 116b3e057a..080d97feeb 100644 --- a/keyboards/mokey/ginkgo65/info.json +++ b/keyboards/mokey/ginkgo65/info.json @@ -1,469 +1,544 @@ { "keyboard_name": "ginkgo65", "url": "", - "maintainer": "mokey", + "maintainer": "rhmokey", + "layout_aliases": { + "LAYOUT": "LAYOUT_65_ansi_blocker" + }, "layouts": { - "LAYOUT": { + "LAYOUT_65_ansi_blocker": { "layout": [ - {"label":"k00", "x":0, "y":0}, - {"label":"k01", "x":1, "y":0}, - {"label":"k02", "x":2, "y":0}, - {"label":"k03", "x":3, "y":0}, - {"label":"k04", "x":4, "y":0}, - {"label":"k05", "x":5, "y":0}, - {"label":"k06", "x":6, "y":0}, - {"label":"k07", "x":7, "y":0}, - {"label":"k08", "x":8, "y":0}, - {"label":"k09", "x":9, "y":0}, - {"label":"k0a", "x":10, "y":0}, - {"label":"k0b", "x":11, "y":0}, - {"label":"k0c", "x":12, "y":0}, - {"label":"k0e", "x":13, "y":0, "w":2}, - {"label":"k0f", "x":15, "y":0}, - - {"label":"k10", "x":0, "y":1, "w":1.5}, - {"label":"k11", "x":1.5, "y":1}, - {"label":"k12", "x":2.5, "y":1}, - {"label":"k13", "x":3.5, "y":1}, - {"label":"k14", "x":4.5, "y":1}, - {"label":"k15", "x":5.5, "y":1}, - {"label":"k16", "x":6.5, "y":1}, - {"label":"k17", "x":7.5, "y":1}, - {"label":"k18", "x":8.5, "y":1}, - {"label":"k19", "x":9.5, "y":1}, - {"label":"k1a", "x":10.5, "y":1}, - {"label":"k1b", "x":11.5, "y":1}, - {"label":"k1c", "x":12.5, "y":1}, - {"label":"k1d", "x":13.5, "y":1, "w":1.5}, - {"label":"k1e", "x":15, "y":1,}, - - {"label":"k20", "x":0, "y":2, "w":1.75}, - {"label":"k21", "x":1.75, "y":2}, - {"label":"k22", "x":2.75, "y":2}, - {"label":"k23", "x":3.75, "y":2}, - {"label":"k24", "x":4.75, "y":2}, - {"label":"k25", "x":5.75, "y":2}, - {"label":"k26", "x":6.75, "y":2}, - {"label":"k27", "x":7.75, "y":2}, - {"label":"k28", "x":8.75, "y":2}, - {"label":"k29", "x":9.75, "y":2}, - {"label":"k2a", "x":10.75, "y":2}, - {"label":"k2b", "x":11.75, "y":2}, - {"label":"k2d", "x":12.75, "y":2, "w":2.25}, - {"label":"k2e", "x":15, "y":2}, - - {"label":"k30", "x":0, "y":3, "w":2.25}, - {"label":"k32", "x":2.25, "y":3}, - {"label":"k33", "x":3.25, "y":3}, - {"label":"k34", "x":4.25, "y":3}, - {"label":"k35", "x":5.25, "y":3}, - {"label":"k36", "x":6.25, "y":3}, - {"label":"k37", "x":7.25, "y":3}, - {"label":"k38", "x":8.25, "y":3}, - {"label":"k39", "x":9.25, "y":3}, - {"label":"k3a", "x":10.25, "y":3}, - {"label":"k3b", "x":11.25, "y":3}, - {"label":"k3c", "x":12.25, "y":3, "w":1.75}, - {"label":"k3d", "x":14, "y":3}, - {"label":"k3e", "x":15, "y":3}, + {"label":"Esc", "x":0, "y":0}, + {"label":"1!", "x":1, "y":0}, + {"label":"2@", "x":2, "y":0}, + {"label":"3#", "x":3, "y":0}, + {"label":"4$", "x":4, "y":0}, + {"label":"5%", "x":5, "y":0}, + {"label":"6^", "x":6, "y":0}, + {"label":"7&", "x":7, "y":0}, + {"label":"8*", "x":8, "y":0}, + {"label":"9(", "x":9, "y":0}, + {"label":"0)", "x":10, "y":0}, + {"label":"-_", "x":11, "y":0}, + {"label":"=+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0, "w":2}, + {"label":"Insert", "x":15, "y":0}, - {"label":"k40", "x":0, "y":4, "w":1.25}, - {"label":"k41", "x":1.25, "y":4, "w":1.25}, - {"label":"k42", "x":2.5, "y":4, "w":1.25}, - {"label":"k44", "x":3.75, "y":4, "w":6.25}, - {"label":"k49", "x":10, "y":4, "w":1.25}, - {"label":"k4a", "x":11.25, "y":4, "w":1.25}, - {"label":"k4c", "x":13, "y":4}, - {"label":"k4d", "x":14, "y":4}, - {"label":"k4e", "x":15, "y":4} + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[{", "x":11.5, "y":1}, + {"label":"]}", "x":12.5, "y":1}, + {"label":"\\|", "x":13.5, "y":1, "w":1.5}, + {"label":"Delete", "x":15, "y":1}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";:", "x":10.75, "y":2}, + {"label":"'\"", "x":11.75, "y":2}, + {"label":"Enter", "x":12.75, "y":2, "w":2.25}, + {"label":"Page Up", "x":15, "y":2}, + + {"label":"Shift", "x":0, "y":3, "w":2.25}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",<", "x":9.25, "y":3}, + {"label":".>", "x":10.25, "y":3}, + {"label":"/?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"\u2191", "x":14, "y":3}, + {"label":"Page Down", "x":15, "y":3}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"GUI", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"label":"Space", "x":3.75, "y":4, "w":6.25}, + {"label":"Alt", "x":10, "y":4, "w":1.25}, + {"label":"Fn", "x":11.25, "y":4, "w":1.25}, + {"label":"\u2190", "x":13, "y":4}, + {"label":"\u2193", "x":14, "y":4}, + {"label":"\u2192", "x":15, "y":4} ] }, - "LAYOUT_iso":{ + "LAYOUT_65_ansi_blocker_split_bs": { "layout": [ - {"label":"k00", "x":0, "y":0}, - {"label":"k01", "x":1, "y":0}, - {"label":"k02", "x":2, "y":0}, - {"label":"k03", "x":3, "y":0}, - {"label":"k04", "x":4, "y":0}, - {"label":"k05", "x":5, "y":0}, - {"label":"k06", "x":6, "y":0}, - {"label":"k07", "x":7, "y":0}, - {"label":"k08", "x":8, "y":0}, - {"label":"k09", "x":9, "y":0}, - {"label":"k0a", "x":10, "y":0}, - {"label":"k0b", "x":11, "y":0}, - {"label":"k0c", "x":12, "y":0}, - {"label":"k0d", "x":13, "y":0}, - {"label":"k0e", "x":14, "y":0}, - {"label":"k0f", "x":15, "y":0}, - - {"label":"k10", "x":0, "y":1, "w":1.5}, - {"label":"k11", "x":1.5, "y":1}, - {"label":"k12", "x":2.5, "y":1}, - {"label":"k13", "x":3.5, "y":1}, - {"label":"k14", "x":4.5, "y":1}, - {"label":"k15", "x":5.5, "y":1}, - {"label":"k16", "x":6.5, "y":1}, - {"label":"k17", "x":7.5, "y":1}, - {"label":"k18", "x":8.5, "y":1}, - {"label":"k19", "x":9.5, "y":1}, - {"label":"k1a", "x":10.5, "y":1}, - {"label":"k1b", "x":11.5, "y":1}, - {"label":"k1c", "x":12.5, "y":1}, - {"label":"k2d", "x":13.75, "y":1, "w":1.25}, - {"label":"k1e", "x":15, "y":1,}, - - {"label":"k20", "x":0, "y":2, "w":1.75}, - {"label":"k21", "x":1.75, "y":2}, - {"label":"k22", "x":2.75, "y":2}, - {"label":"k23", "x":3.75, "y":2}, - {"label":"k24", "x":4.75, "y":2}, - {"label":"k25", "x":5.75, "y":2}, - {"label":"k26", "x":6.75, "y":2}, - {"label":"k27", "x":7.75, "y":2}, - {"label":"k28", "x":8.75, "y":2}, - {"label":"k29", "x":9.75, "y":2}, - {"label":"k2a", "x":10.75, "y":2}, - {"label":"k2b", "x":11.75, "y":2}, - {"label":"k1d", "x":12.75, "y":2}, - {"label":"k2e", "x":15, "y":2}, - - {"label":"k30", "x":0, "y":3, "w":2.25}, - {"label":"k32", "x":2.25, "y":3}, - {"label":"k33", "x":3.25, "y":3}, - {"label":"k34", "x":4.25, "y":3}, - {"label":"k35", "x":5.25, "y":3}, - {"label":"k36", "x":6.25, "y":3}, - {"label":"k37", "x":7.25, "y":3}, - {"label":"k38", "x":8.25, "y":3}, - {"label":"k39", "x":9.25, "y":3}, - {"label":"k3a", "x":10.25, "y":3}, - {"label":"k3b", "x":11.25, "y":3}, - {"label":"k3c", "x":12.25, "y":3, "w":1.75}, - {"label":"k3d", "x":14, "y":3}, - {"label":"k3e", "x":15, "y":3}, + {"label":"Esc", "x":0, "y":0}, + {"label":"1!", "x":1, "y":0}, + {"label":"2@", "x":2, "y":0}, + {"label":"3#", "x":3, "y":0}, + {"label":"4$", "x":4, "y":0}, + {"label":"5%", "x":5, "y":0}, + {"label":"6^", "x":6, "y":0}, + {"label":"7&", "x":7, "y":0}, + {"label":"8*", "x":8, "y":0}, + {"label":"9(", "x":9, "y":0}, + {"label":"0)", "x":10, "y":0}, + {"label":"-_", "x":11, "y":0}, + {"label":"=+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0}, + {"label":"Backspace", "x":14, "y":0}, + {"label":"Insert", "x":15, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[{", "x":11.5, "y":1}, + {"label":"]}", "x":12.5, "y":1}, + {"label":"\\|", "x":13.5, "y":1, "w":1.5}, + {"label":"Delete", "x":15, "y":1}, - {"label":"k40", "x":0, "y":4, "w":1.25}, - {"label":"k41", "x":1.25, "y":4, "w":1.25}, - {"label":"k42", "x":2.5, "y":4, "w":1.25}, - {"label":"k44", "x":3.75, "y":4, "w":6.25}, - {"label":"k49", "x":10, "y":4, "w":1.25}, - {"label":"k4a", "x":11.25, "y":4, "w":1.25}, - {"label":"k4c", "x":13, "y":4}, - {"label":"k4d", "x":14, "y":4}, - {"label":"k4e", "x":15, "y":4} + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";:", "x":10.75, "y":2}, + {"label":"'\"", "x":11.75, "y":2}, + {"label":"Enter", "x":12.75, "y":2, "w":2.25}, + {"label":"Page Up", "x":15, "y":2}, + + {"label":"Shift", "x":0, "y":3, "w":2.25}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",<", "x":9.25, "y":3}, + {"label":".>", "x":10.25, "y":3}, + {"label":"/?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"\u2191", "x":14, "y":3}, + {"label":"Page Down", "x":15, "y":3}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"GUI", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"label":"Space", "x":3.75, "y":4, "w":6.25}, + {"label":"Alt", "x":10, "y":4, "w":1.25}, + {"label":"Fn", "x":11.25, "y":4, "w":1.25}, + {"label":"\u2190", "x":13, "y":4}, + {"label":"\u2193", "x":14, "y":4}, + {"label":"\u2192", "x":15, "y":4} ] }, - "LAYOUT_split_left_shift":{ + "LAYOUT_65_ansi_blocker_tsangan_split_bs": { "layout": [ - {"label":"k00", "x":0, "y":0}, - {"label":"k01", "x":1, "y":0}, - {"label":"k02", "x":2, "y":0}, - {"label":"k03", "x":3, "y":0}, - {"label":"k04", "x":4, "y":0}, - {"label":"k05", "x":5, "y":0}, - {"label":"k06", "x":6, "y":0}, - {"label":"k07", "x":7, "y":0}, - {"label":"k08", "x":8, "y":0}, - {"label":"k09", "x":9, "y":0}, - {"label":"k0a", "x":10, "y":0}, - {"label":"k0b", "x":11, "y":0}, - {"label":"k0c", "x":12, "y":0}, - {"label":"k0d", "x":13, "y":0}, - {"label":"k0e", "x":14, "y":0}, - {"label":"k0f", "x":15, "y":0}, - - {"label":"k10", "x":0, "y":1, "w":1.5}, - {"label":"k11", "x":1.5, "y":1}, - {"label":"k12", "x":2.5, "y":1}, - {"label":"k13", "x":3.5, "y":1}, - {"label":"k14", "x":4.5, "y":1}, - {"label":"k15", "x":5.5, "y":1}, - {"label":"k16", "x":6.5, "y":1}, - {"label":"k17", "x":7.5, "y":1}, - {"label":"k18", "x":8.5, "y":1}, - {"label":"k19", "x":9.5, "y":1}, - {"label":"k1a", "x":10.5, "y":1}, - {"label":"k1b", "x":11.5, "y":1}, - {"label":"k1c", "x":12.5, "y":1}, - {"label":"k2d", "x":13.75, "y":1, "w":1.25}, - {"label":"k1e", "x":15, "y":1,}, - - {"label":"k20", "x":0, "y":2, "w":1.75}, - {"label":"k21", "x":1.75, "y":2}, - {"label":"k22", "x":2.75, "y":2}, - {"label":"k23", "x":3.75, "y":2}, - {"label":"k24", "x":4.75, "y":2}, - {"label":"k25", "x":5.75, "y":2}, - {"label":"k26", "x":6.75, "y":2}, - {"label":"k27", "x":7.75, "y":2}, - {"label":"k28", "x":8.75, "y":2}, - {"label":"k29", "x":9.75, "y":2}, - {"label":"k2a", "x":10.75, "y":2}, - {"label":"k2b", "x":11.75, "y":2}, - {"label":"k1d", "x":12.75, "y":2}, - {"label":"k2e", "x":15, "y":2}, - - {"label":"k30", "x":0, "y":3, "w":1.25}, - {"label":"k31", "x":1.25, "y":3}, - {"label":"k32", "x":2.25, "y":3}, - {"label":"k33", "x":3.25, "y":3}, - {"label":"k34", "x":4.25, "y":3}, - {"label":"k35", "x":5.25, "y":3}, - {"label":"k36", "x":6.25, "y":3}, - {"label":"k37", "x":7.25, "y":3}, - {"label":"k38", "x":8.25, "y":3}, - {"label":"k39", "x":9.25, "y":3}, - {"label":"k3a", "x":10.25, "y":3}, - {"label":"k3b", "x":11.25, "y":3}, - {"label":"k3c", "x":12.25, "y":3, "w":1.75}, - {"label":"k3d", "x":14, "y":3}, - {"label":"k3e", "x":15, "y":3}, + {"label":"Esc", "x":0, "y":0}, + {"label":"1!", "x":1, "y":0}, + {"label":"2@", "x":2, "y":0}, + {"label":"3#", "x":3, "y":0}, + {"label":"4$", "x":4, "y":0}, + {"label":"5%", "x":5, "y":0}, + {"label":"6^", "x":6, "y":0}, + {"label":"7&", "x":7, "y":0}, + {"label":"8*", "x":8, "y":0}, + {"label":"9(", "x":9, "y":0}, + {"label":"0)", "x":10, "y":0}, + {"label":"-_", "x":11, "y":0}, + {"label":"=+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0}, + {"label":"Backspace", "x":14, "y":0}, + {"label":"Insert", "x":15, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[{", "x":11.5, "y":1}, + {"label":"]}", "x":12.5, "y":1}, + {"label":"\\|", "x":13.5, "y":1, "w":1.5}, + {"label":"Delete", "x":15, "y":1}, - {"label":"k40", "x":0, "y":4, "w":1.25}, - {"label":"k41", "x":1.25, "y":4, "w":1.25}, - {"label":"k42", "x":2.5, "y":4, "w":1.25}, - {"label":"k44", "x":3.75, "y":4, "w":6.25}, - {"label":"k49", "x":10, "y":4, "w":1.25}, - {"label":"k4a", "x":11.25, "y":4, "w":1.25}, - {"label":"k4c", "x":13, "y":4}, - {"label":"k4d", "x":14, "y":4}, - {"label":"k4e", "x":15, "y":4} + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";:", "x":10.75, "y":2}, + {"label":"'\"", "x":11.75, "y":2}, + {"label":"Enter", "x":12.75, "y":2, "w":2.25}, + {"label":"Page Up", "x":15, "y":2}, + + {"label":"Shift", "x":0, "y":3, "w":2.25}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",<", "x":9.25, "y":3}, + {"label":".>", "x":10.25, "y":3}, + {"label":"/?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"\u2191", "x":14, "y":3}, + {"label":"Page Down", "x":15, "y":3}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.5}, + {"label":"GUI", "x":1.5, "y":4}, + {"label":"Alt", "x":2.5, "y":4, "w":1.5}, + {"label":"Space", "x":4, "y":4, "w":7}, + {"label":"Fn", "x":11, "y":4, "w":1.5}, + {"label":"\u2190", "x":13, "y":4}, + {"label":"\u2193", "x":14, "y":4}, + {"label":"\u2192", "x":15, "y":4} ] }, - "LAYOUT_7u_space":{ + "LAYOUT_65_iso_blocker":{ "layout": [ - {"label":"k00", "x":0, "y":0}, - {"label":"k01", "x":1, "y":0}, - {"label":"k02", "x":2, "y":0}, - {"label":"k03", "x":3, "y":0}, - {"label":"k04", "x":4, "y":0}, - {"label":"k05", "x":5, "y":0}, - {"label":"k06", "x":6, "y":0}, - {"label":"k07", "x":7, "y":0}, - {"label":"k08", "x":8, "y":0}, - {"label":"k09", "x":9, "y":0}, - {"label":"k0a", "x":10, "y":0}, - {"label":"k0b", "x":11, "y":0}, - {"label":"k0c", "x":12, "y":0}, - {"label":"k0d", "x":13, "y":0}, - {"label":"k0e", "x":14, "y":0}, - {"label":"k0f", "x":15, "y":0}, - - {"label":"k10", "x":0, "y":1, "w":1.5}, - {"label":"k11", "x":1.5, "y":1}, - {"label":"k12", "x":2.5, "y":1}, - {"label":"k13", "x":3.5, "y":1}, - {"label":"k14", "x":4.5, "y":1}, - {"label":"k15", "x":5.5, "y":1}, - {"label":"k16", "x":6.5, "y":1}, - {"label":"k17", "x":7.5, "y":1}, - {"label":"k18", "x":8.5, "y":1}, - {"label":"k19", "x":9.5, "y":1}, - {"label":"k1a", "x":10.5, "y":1}, - {"label":"k1b", "x":11.5, "y":1}, - {"label":"k1c", "x":12.5, "y":1}, - {"label":"k2d", "x":13.75, "y":1, "w":1.25}, - {"label":"k1e", "x":15, "y":1,}, - - {"label":"k20", "x":0, "y":2, "w":1.75}, - {"label":"k21", "x":1.75, "y":2}, - {"label":"k22", "x":2.75, "y":2}, - {"label":"k23", "x":3.75, "y":2}, - {"label":"k24", "x":4.75, "y":2}, - {"label":"k25", "x":5.75, "y":2}, - {"label":"k26", "x":6.75, "y":2}, - {"label":"k27", "x":7.75, "y":2}, - {"label":"k28", "x":8.75, "y":2}, - {"label":"k29", "x":9.75, "y":2}, - {"label":"k2a", "x":10.75, "y":2}, - {"label":"k2b", "x":11.75, "y":2}, - {"label":"k1d", "x":12.75, "y":2}, - {"label":"k2e", "x":15, "y":2}, - - {"label":"k30", "x":0, "y":3, "w":1.25}, - {"label":"k31", "x":1.25, "y":3}, - {"label":"k32", "x":2.25, "y":3}, - {"label":"k33", "x":3.25, "y":3}, - {"label":"k34", "x":4.25, "y":3}, - {"label":"k35", "x":5.25, "y":3}, - {"label":"k36", "x":6.25, "y":3}, - {"label":"k37", "x":7.25, "y":3}, - {"label":"k38", "x":8.25, "y":3}, - {"label":"k39", "x":9.25, "y":3}, - {"label":"k3a", "x":10.25, "y":3}, - {"label":"k3b", "x":11.25, "y":3}, - {"label":"k3c", "x":12.25, "y":3, "w":1.75}, - {"label":"k3d", "x":14, "y":3}, - {"label":"k3e", "x":15, "y":3}, + {"label":"Esc", "x":0, "y":0}, + {"label":"1!", "x":1, "y":0}, + {"label":"2\"", "x":2, "y":0}, + {"label":"3\u00a3", "x":3, "y":0}, + {"label":"4$", "x":4, "y":0}, + {"label":"5%", "x":5, "y":0}, + {"label":"6^", "x":6, "y":0}, + {"label":"7&", "x":7, "y":0}, + {"label":"8*", "x":8, "y":0}, + {"label":"9(", "x":9, "y":0}, + {"label":"0)", "x":10, "y":0}, + {"label":"-_", "x":11, "y":0}, + {"label":"=+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0, "w":2}, + {"label":"Insert", "x":15, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[{", "x":11.5, "y":1}, + {"label":"]}", "x":12.5, "y":1}, + {"label":"Delete", "x":15, "y":1}, - {"label":"k40", "x":0, "y":4, "w":1.5}, - {"label":"k41", "x":1.5, "y":4,}, - {"label":"k42", "x":2.5, "y":4, "w":1.5}, - {"label":"k44", "x":4, "y":4, "w":7}, - {"label":"k49", "x":11, "y":4, "w":1.5}, - {"label":"k4c", "x":13, "y":4}, - {"label":"k4d", "x":14, "y":4}, - {"label":"k4e", "x":15, "y":4} + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";:", "x":10.75, "y":2}, + {"label":"'@", "x":11.75, "y":2}, + {"label":"#~", "x":12.75, "y":2}, + {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, + {"label":"Page Up", "x":15, "y":2}, + + {"label":"Shift", "x":0, "y":3, "w":1.25}, + {"label":"\\|", "x":1.25, "y":3}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",<", "x":9.25, "y":3}, + {"label":".>", "x":10.25, "y":3}, + {"label":"/?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"\u2191", "x":14, "y":3}, + {"label":"Page Down", "x":15, "y":3}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"GUI", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"label":"Space", "x":3.75, "y":4, "w":6.25}, + {"label":"Alt", "x":10, "y":4, "w":1.25}, + {"label":"Fn", "x":11.25, "y":4, "w":1.25}, + {"label":"\u2190", "x":13, "y":4}, + {"label":"\u2193", "x":14, "y":4}, + {"label":"\u2192", "x":15, "y":4} ] }, - "LAYOUT_split_space_1":{ + "LAYOUT_65_iso_blocker_split_bs":{ "layout": [ - {"label":"k00", "x":0, "y":0}, - {"label":"k01", "x":1, "y":0}, - {"label":"k02", "x":2, "y":0}, - {"label":"k03", "x":3, "y":0}, - {"label":"k04", "x":4, "y":0}, - {"label":"k05", "x":5, "y":0}, - {"label":"k06", "x":6, "y":0}, - {"label":"k07", "x":7, "y":0}, - {"label":"k08", "x":8, "y":0}, - {"label":"k09", "x":9, "y":0}, - {"label":"k0a", "x":10, "y":0}, - {"label":"k0b", "x":11, "y":0}, - {"label":"k0c", "x":12, "y":0}, - {"label":"k0d", "x":13, "y":0}, - {"label":"k0e", "x":14, "y":0}, - {"label":"k0f", "x":15, "y":0}, - - {"label":"k10", "x":0, "y":1, "w":1.5}, - {"label":"k11", "x":1.5, "y":1}, - {"label":"k12", "x":2.5, "y":1}, - {"label":"k13", "x":3.5, "y":1}, - {"label":"k14", "x":4.5, "y":1}, - {"label":"k15", "x":5.5, "y":1}, - {"label":"k16", "x":6.5, "y":1}, - {"label":"k17", "x":7.5, "y":1}, - {"label":"k18", "x":8.5, "y":1}, - {"label":"k19", "x":9.5, "y":1}, - {"label":"k1a", "x":10.5, "y":1}, - {"label":"k1b", "x":11.5, "y":1}, - {"label":"k1c", "x":12.5, "y":1}, - {"label":"k2d", "x":13.75, "y":1, "w":1.25}, - {"label":"k1e", "x":15, "y":1,}, - - {"label":"k20", "x":0, "y":2, "w":1.75}, - {"label":"k21", "x":1.75, "y":2}, - {"label":"k22", "x":2.75, "y":2}, - {"label":"k23", "x":3.75, "y":2}, - {"label":"k24", "x":4.75, "y":2}, - {"label":"k25", "x":5.75, "y":2}, - {"label":"k26", "x":6.75, "y":2}, - {"label":"k27", "x":7.75, "y":2}, - {"label":"k28", "x":8.75, "y":2}, - {"label":"k29", "x":9.75, "y":2}, - {"label":"k2a", "x":10.75, "y":2}, - {"label":"k2b", "x":11.75, "y":2}, - {"label":"k1d", "x":12.75, "y":2}, - {"label":"k2e", "x":15, "y":2}, - - {"label":"k30", "x":0, "y":3, "w":1.25}, - {"label":"k31", "x":1.25, "y":3}, - {"label":"k32", "x":2.25, "y":3}, - {"label":"k33", "x":3.25, "y":3}, - {"label":"k34", "x":4.25, "y":3}, - {"label":"k35", "x":5.25, "y":3}, - {"label":"k36", "x":6.25, "y":3}, - {"label":"k37", "x":7.25, "y":3}, - {"label":"k38", "x":8.25, "y":3}, - {"label":"k39", "x":9.25, "y":3}, - {"label":"k3a", "x":10.25, "y":3}, - {"label":"k3b", "x":11.25, "y":3}, - {"label":"k3c", "x":12.25, "y":3, "w":1.75}, - {"label":"k3d", "x":14, "y":3}, - {"label":"k3e", "x":15, "y":3}, + {"label":"Esc", "x":0, "y":0}, + {"label":"1!", "x":1, "y":0}, + {"label":"2\"", "x":2, "y":0}, + {"label":"3\u00a3", "x":3, "y":0}, + {"label":"4$", "x":4, "y":0}, + {"label":"5%", "x":5, "y":0}, + {"label":"6^", "x":6, "y":0}, + {"label":"7&", "x":7, "y":0}, + {"label":"8*", "x":8, "y":0}, + {"label":"9(", "x":9, "y":0}, + {"label":"0)", "x":10, "y":0}, + {"label":"-_", "x":11, "y":0}, + {"label":"=+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0}, + {"label":"Backspace", "x":14, "y":0}, + {"label":"Insert", "x":15, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[{", "x":11.5, "y":1}, + {"label":"]}", "x":12.5, "y":1}, + {"label":"Delete", "x":15, "y":1}, - {"label":"k40", "x":0, "y":4, "w":1.25}, - {"label":"k41", "x":1.25, "y":4, "w":1.25}, - {"label":"k42", "x":2.5, "y":4, "w":1.25}, - {"label":"k43", "x":3.75, "y":4, "w":2.75}, - {"label":"k44", "x":6.5, "y":4, "w":1.25}, - {"label":"k46", "x":7.75, "y":4, "w":2.25}, - {"label":"k49", "x":10, "y":4, "w":1.25}, - {"label":"k4a", "x":11.25, "y":4, "w":1.25}, - {"label":"k4c", "x":13, "y":4}, - {"label":"k4d", "x":14, "y":4}, - {"label":"k4e", "x":15, "y":4} + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";:", "x":10.75, "y":2}, + {"label":"'@", "x":11.75, "y":2}, + {"label":"#~", "x":12.75, "y":2}, + {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, + {"label":"Page Up", "x":15, "y":2}, + + {"label":"Shift", "x":0, "y":3, "w":1.25}, + {"label":"\\|", "x":1.25, "y":3}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",<", "x":9.25, "y":3}, + {"label":".>", "x":10.25, "y":3}, + {"label":"/?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"\u2191", "x":14, "y":3}, + {"label":"Page Down", "x":15, "y":3}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"GUI", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"label":"Space", "x":3.75, "y":4, "w":6.25}, + {"label":"Alt", "x":10, "y":4, "w":1.25}, + {"label":"Fn", "x":11.25, "y":4, "w":1.25}, + {"label":"\u2190", "x":13, "y":4}, + {"label":"\u2193", "x":14, "y":4}, + {"label":"\u2192", "x":15, "y":4} + ] + }, + "LAYOUT_65_iso_blocker_tsangan_split_bs":{ + "layout": [ + {"label":"Esc", "x":0, "y":0}, + {"label":"1!", "x":1, "y":0}, + {"label":"2\"", "x":2, "y":0}, + {"label":"3\u00a3", "x":3, "y":0}, + {"label":"4$", "x":4, "y":0}, + {"label":"5%", "x":5, "y":0}, + {"label":"6^", "x":6, "y":0}, + {"label":"7&", "x":7, "y":0}, + {"label":"8*", "x":8, "y":0}, + {"label":"9(", "x":9, "y":0}, + {"label":"0)", "x":10, "y":0}, + {"label":"-_", "x":11, "y":0}, + {"label":"=+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0}, + {"label":"Backspace", "x":14, "y":0}, + {"label":"Insert", "x":15, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[{", "x":11.5, "y":1}, + {"label":"]}", "x":12.5, "y":1}, + {"label":"Delete", "x":15, "y":1}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";:", "x":10.75, "y":2}, + {"label":"'@", "x":11.75, "y":2}, + {"label":"#~", "x":12.75, "y":2}, + {"label":"Enter", "x":13.75, "y":1, "w":1.25, "h":2}, + {"label":"Page Up", "x":15, "y":2}, + + {"label":"Shift", "x":0, "y":3, "w":1.25}, + {"label":"\\|", "x":1.25, "y":3}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",<", "x":9.25, "y":3}, + {"label":".>", "x":10.25, "y":3}, + {"label":"/?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"\u2191", "x":14, "y":3}, + {"label":"Page Down", "x":15, "y":3}, + + {"label":"Ctrl", "x":0, "y":4, "w":1.5}, + {"label":"GUI", "x":1.5, "y":4}, + {"label":"Alt", "x":2.5, "y":4, "w":1.5}, + {"label":"Space", "x":4, "y":4, "w":7}, + {"label":"Fn", "x":11, "y":4, "w":1.5}, + {"label":"\u2190", "x":13, "y":4}, + {"label":"\u2193", "x":14, "y":4}, + {"label":"\u2192", "x":15, "y":4} ] }, - "LAYOUT_split_space_2":{ + "LAYOUT_all":{ "layout": [ - {"label":"k00", "x":0, "y":0}, - {"label":"k01", "x":1, "y":0}, - {"label":"k02", "x":2, "y":0}, - {"label":"k03", "x":3, "y":0}, - {"label":"k04", "x":4, "y":0}, - {"label":"k05", "x":5, "y":0}, - {"label":"k06", "x":6, "y":0}, - {"label":"k07", "x":7, "y":0}, - {"label":"k08", "x":8, "y":0}, - {"label":"k09", "x":9, "y":0}, - {"label":"k0a", "x":10, "y":0}, - {"label":"k0b", "x":11, "y":0}, - {"label":"k0c", "x":12, "y":0}, - {"label":"k0d", "x":13, "y":0}, - {"label":"k0e", "x":14, "y":0}, - {"label":"k0f", "x":15, "y":0}, - - {"label":"k10", "x":0, "y":1, "w":1.5}, - {"label":"k11", "x":1.5, "y":1}, - {"label":"k12", "x":2.5, "y":1}, - {"label":"k13", "x":3.5, "y":1}, - {"label":"k14", "x":4.5, "y":1}, - {"label":"k15", "x":5.5, "y":1}, - {"label":"k16", "x":6.5, "y":1}, - {"label":"k17", "x":7.5, "y":1}, - {"label":"k18", "x":8.5, "y":1}, - {"label":"k19", "x":9.5, "y":1}, - {"label":"k1a", "x":10.5, "y":1}, - {"label":"k1b", "x":11.5, "y":1}, - {"label":"k1c", "x":12.5, "y":1}, - {"label":"k2d", "x":13.75, "y":1, "w":1.25}, - {"label":"k1e", "x":15, "y":1,}, - - {"label":"k20", "x":0, "y":2, "w":1.75}, - {"label":"k21", "x":1.75, "y":2}, - {"label":"k22", "x":2.75, "y":2}, - {"label":"k23", "x":3.75, "y":2}, - {"label":"k24", "x":4.75, "y":2}, - {"label":"k25", "x":5.75, "y":2}, - {"label":"k26", "x":6.75, "y":2}, - {"label":"k27", "x":7.75, "y":2}, - {"label":"k28", "x":8.75, "y":2}, - {"label":"k29", "x":9.75, "y":2}, - {"label":"k2a", "x":10.75, "y":2}, - {"label":"k2b", "x":11.75, "y":2}, - {"label":"k1d", "x":12.75, "y":2}, - {"label":"k2e", "x":15, "y":2}, - - {"label":"k30", "x":0, "y":3, "w":1.25}, - {"label":"k31", "x":1.25, "y":3}, - {"label":"k32", "x":2.25, "y":3}, - {"label":"k33", "x":3.25, "y":3}, - {"label":"k34", "x":4.25, "y":3}, - {"label":"k35", "x":5.25, "y":3}, - {"label":"k36", "x":6.25, "y":3}, - {"label":"k37", "x":7.25, "y":3}, - {"label":"k38", "x":8.25, "y":3}, - {"label":"k39", "x":9.25, "y":3}, - {"label":"k3a", "x":10.25, "y":3}, - {"label":"k3b", "x":11.25, "y":3}, - {"label":"k3c", "x":12.25, "y":3, "w":1.75}, - {"label":"k3d", "x":14, "y":3}, - {"label":"k3e", "x":15, "y":3}, + {"label":"Esc", "x":0, "y":0}, + {"label":"1!", "x":1, "y":0}, + {"label":"2@", "x":2, "y":0}, + {"label":"3#", "x":3, "y":0}, + {"label":"4$", "x":4, "y":0}, + {"label":"5%", "x":5, "y":0}, + {"label":"6^", "x":6, "y":0}, + {"label":"7&", "x":7, "y":0}, + {"label":"8*", "x":8, "y":0}, + {"label":"9(", "x":9, "y":0}, + {"label":"0)", "x":10, "y":0}, + {"label":"-_", "x":11, "y":0}, + {"label":"=+", "x":12, "y":0}, + {"label":"Backspace", "x":13, "y":0}, + {"label":"Backspace", "x":14, "y":0}, + {"label":"Insert", "x":15, "y":0}, + + {"label":"Tab", "x":0, "y":1, "w":1.5}, + {"label":"Q", "x":1.5, "y":1}, + {"label":"W", "x":2.5, "y":1}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1}, + {"label":"T", "x":5.5, "y":1}, + {"label":"Y", "x":6.5, "y":1}, + {"label":"U", "x":7.5, "y":1}, + {"label":"I", "x":8.5, "y":1}, + {"label":"O", "x":9.5, "y":1}, + {"label":"P", "x":10.5, "y":1}, + {"label":"[{", "x":11.5, "y":1}, + {"label":"]}", "x":12.5, "y":1}, + {"label":"\\|", "x":13.5, "y":1, "w":1.5}, + {"label":"Delete", "x":15, "y":1}, + + {"label":"Caps Lock", "x":0, "y":2, "w":1.75}, + {"label":"A", "x":1.75, "y":2}, + {"label":"S", "x":2.75, "y":2}, + {"label":"D", "x":3.75, "y":2}, + {"label":"F", "x":4.75, "y":2}, + {"label":"G", "x":5.75, "y":2}, + {"label":"H", "x":6.75, "y":2}, + {"label":"J", "x":7.75, "y":2}, + {"label":"K", "x":8.75, "y":2}, + {"label":"L", "x":9.75, "y":2}, + {"label":";:", "x":10.75, "y":2}, + {"label":"'\"", "x":11.75, "y":2}, + {"label":"Enter", "x":12.75, "y":2, "w":2.25}, + {"label":"Page Up", "x":15, "y":2}, + + {"label":"Shift", "x":0, "y":3, "w":1.25}, + {"label":"\\|", "x":1.25, "y":3}, + {"label":"Z", "x":2.25, "y":3}, + {"label":"X", "x":3.25, "y":3}, + {"label":"C", "x":4.25, "y":3}, + {"label":"V", "x":5.25, "y":3}, + {"label":"B", "x":6.25, "y":3}, + {"label":"N", "x":7.25, "y":3}, + {"label":"M", "x":8.25, "y":3}, + {"label":",<", "x":9.25, "y":3}, + {"label":".>", "x":10.25, "y":3}, + {"label":"/?", "x":11.25, "y":3}, + {"label":"Shift", "x":12.25, "y":3, "w":1.75}, + {"label":"\u2191", "x":14, "y":3}, + {"label":"Page Down", "x":15, "y":3}, - {"label":"k40", "x":0, "y":4, "w":1.25}, - {"label":"k41", "x":1.25, "y":4, "w":1.25}, - {"label":"k42", "x":2.5, "y":4, "w":1.25}, - {"label":"k43", "x":3.75, "y":4, "w":2.25}, - {"label":"k44", "x":6, "y":4, "w":1.25}, - {"label":"k46", "x":7.25, "y":4, "w":2.75}, - {"label":"k49", "x":10, "y":4, "w":1.25}, - {"label":"k4a", "x":11.25, "y":4, "w":1.25}, - {"label":"k4c", "x":13, "y":4}, - {"label":"k4d", "x":14, "y":4}, - {"label":"k4e", "x":15, "y":4} + {"label":"Ctrl", "x":0, "y":4, "w":1.25}, + {"label":"GUI", "x":1.25, "y":4, "w":1.25}, + {"label":"Alt", "x":2.5, "y":4, "w":1.25}, + {"label":"Space", "x":3.75, "y":4, "w":2.25}, + {"label":"Space", "x":6, "y":4, "w":1.25}, + {"label":"Space", "x":7.25, "y":4, "w":2.75}, + {"label":"Alt", "x":10, "y":4, "w":1.25}, + {"label":"Fn", "x":11.25, "y":4, "w":1.25}, + {"label":"\u2190", "x":13, "y":4}, + {"label":"\u2193", "x":14, "y":4}, + {"label":"\u2192", "x":15, "y":4} ] } } -} \ No newline at end of file +} diff --git a/keyboards/mokey/ginkgo65/keymaps/default/keymap.c b/keyboards/mokey/ginkgo65/keymaps/default/keymap.c index 0d411bc9d2..9ac7dc18ba 100644 --- a/keyboards/mokey/ginkgo65/keymaps/default/keymap.c +++ b/keyboards/mokey/ginkgo65/keymaps/default/keymap.c @@ -32,12 +32,20 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘ */ - LAYOUT( - /* 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 */ - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + [0] = LAYOUT_65_ansi_blocker( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT ), + + [1] = LAYOUT_65_ansi_blocker( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, + BL_TOGG, BL_STEP, BL_DEC, BL_INC, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + }; diff --git a/keyboards/mokey/ginkgo65/keymaps/via/keymap.c b/keyboards/mokey/ginkgo65/keymaps/via/keymap.c index 90e7a8e904..28fdc1a9b2 100644 --- a/keyboards/mokey/ginkgo65/keymaps/via/keymap.c +++ b/keyboards/mokey/ginkgo65/keymaps/via/keymap.c @@ -16,35 +16,36 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( - KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT + [0] = LAYOUT_65_ansi_blocker( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_LEFT, KC_DOWN, KC_RGHT ), - [1] = LAYOUT( - KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, - BL_TOGG, BL_STEP, BL_DEC, BL_INC, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______ + [1] = LAYOUT_65_ansi_blocker( + KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, + BL_TOGG, BL_STEP, BL_DEC, BL_INC, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______ ), - [2] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + [2] = LAYOUT_65_ansi_blocker( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), - [3] = LAYOUT( - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, - _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + [3] = LAYOUT_65_ansi_blocker( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), + }; diff --git a/keyboards/mokey/ginkgo65/rules.mk b/keyboards/mokey/ginkgo65/rules.mk index 4f1faaec80..807d606d83 100644 --- a/keyboards/mokey/ginkgo65/rules.mk +++ b/keyboards/mokey/ginkgo65/rules.mk @@ -19,3 +19,5 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output + +LAYOUTS = 65_ansi_blocker 65_ansi_blocker_split_bs 65_iso_blocker 65_iso_blocker_split_bs From e864786c0b64423aa2fa83f2cc8a2049af9957fd Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Sun, 21 Nov 2021 22:38:31 +0000 Subject: [PATCH 556/595] Ocean Wang Ergo: Fix QMK Configurator Implementation (#15249) * info.json: apply friendly formatting * info.json: update labels; reposition keys * wang_ergo.h: use XXX for KC_NO * wang_ergo.h: add matrix diagram * rename LAYOUT to LAYOUT_all * move Backspace keycode to top row Moves the matrix argument/keycode for Backspace to its proper position at the end of the top row. * add LAYOUT_2x2u with keymap * info.json: update maintainer field Use the maintainer's GitHub username. --- keyboards/ocean/wang_ergo/info.json | 116 +++++++++++++++++- .../ocean/wang_ergo/keymaps/default/keymap.c | 10 +- .../wang_ergo/keymaps/default_2x2u/keymap.c | 24 ++++ .../ocean/wang_ergo/keymaps/via/keymap.c | 40 +++--- keyboards/ocean/wang_ergo/wang_ergo.h | 48 ++++++-- 5 files changed, 198 insertions(+), 40 deletions(-) create mode 100644 keyboards/ocean/wang_ergo/keymaps/default_2x2u/keymap.c diff --git a/keyboards/ocean/wang_ergo/info.json b/keyboards/ocean/wang_ergo/info.json index 7853de6a44..5ade58c54c 100644 --- a/keyboards/ocean/wang_ergo/info.json +++ b/keyboards/ocean/wang_ergo/info.json @@ -1,10 +1,114 @@ { - "keyboard_name": "Wang Ergo", - "url": "", - "maintainer": "Ocean", + "keyboard_name": "Wang Ergo", + "url": "", + "maintainer": "oceeean", + "layout_aliases": { + "LAYOUT": "LAYOUT_all" + }, "layouts": { - "LAYOUT": { - "layout": [{"label":"0,0", "x":1.75, "y":2.25}, {"label":"0,11", "x":15.15, "y":2.25}, {"label":"3,10", "x":16.15, "y":2.25}, {"label":"1,0", "x":1.5, "y":3.25, "w":1.25}, {"label":"1,11", "x":15.15, "y":3.25, "w":1.75}, {"label":"2,0", "x":1, "y":4.25, "w":1.75}, {"label":"2,11", "x":15.15, "y":4.25, "w":1.25}, {"label":"3,0", "x":0.75, "y":5.25}, {"label":"3,1", "x":1.75, "y":5.25}, {"label":"3,11", "x":15.15, "y":5.25}, {"label":"0,1", "x":3.15, "y":2}, {"label":"1,1", "x":3.15, "y":3}, {"label":"2,1", "x":3.15, "y":4}, {"label":"0,2", "x":4.5, "y":1.75}, {"label":"0,3", "x":5.5, "y":1.75}, {"label":"0,4", "x":6.5, "y":1.75}, {"label":"0,5", "x":7.5, "y":1.75}, {"label":"1,2", "x":4.5, "y":2.75}, {"label":"1,3", "x":5.5, "y":2.75}, {"label":"1,4", "x":6.5, "y":2.75}, {"label":"1,5", "x":7.5, "y":2.75}, {"label":"2,2", "x":4.5, "y":3.75}, {"label":"2,3", "x":5.5, "y":3.75}, {"label":"2,4", "x":6.5, "y":3.75}, {"label":"2,5", "x":7.5, "y":3.75}, {"label":"3,3", "x":5.5, "y":4.75}, {"label":"3,4", "x":6.5, "y":4.75}, {"label":"3,5", "x":7.5, "y":4.75}, {"label":"0,6", "x":9.25, "y":4.25}, {"label":"0,7", "x":10.25, "y":4.25}, {"label":"0,8", "x":11.25, "y":4.25}, {"label":"0,9", "x":12.25, "y":4.25}, {"label":"1,6", "x":9.25, "y":5.25}, {"label":"1,7", "x":10.25, "y":5.25}, {"label":"1,8", "x":11.25, "y":5.25}, {"label":"1,9", "x":12.25, "y":5.25}, {"label":"2,6", "x":9.25, "y":6.25}, {"label":"2,7", "x":10.25, "y":6.25}, {"label":"2,8", "x":11.25, "y":6.25}, {"label":"2,9", "x":12.25, "y":6.25}, {"label":"3,6", "x":9.25, "y":7.25}, {"label":"3,7", "x":10.25, "y":7.25}, {"label":"3,8", "x":11.25, "y":7.25}, {"label":"0,10", "x":13.75, "y":3.25}, {"label":"1,10", "x":13.75, "y":4.25}, {"label":"2,10", "x":13.75, "y":5.25}] + "LAYOUT_all": { + "layout": [ + {"label":"Esc", "x":1, "y":0}, + {"label":"Q", "x":2, "y":0}, + {"label":"W", "x":3, "y":0}, + {"label":"E", "x":4, "y":0}, + {"label":"R", "x":5, "y":0}, + {"label":"T", "x":6, "y":0}, + {"label":"Y", "x":8, "y":0}, + {"label":"U", "x":9, "y":0}, + {"label":"I", "x":10, "y":0}, + {"label":"O", "x":11, "y":0}, + {"label":"P", "x":12, "y":0}, + {"label":"Del", "x":13, "y":0}, + {"label":"Backspace", "x":14, "y":0}, + + {"label":"Tab", "x":0.75, "y":1, "w":1.25}, + {"label":"A", "x":2, "y":1}, + {"label":"S", "x":3, "y":1}, + {"label":"D", "x":4, "y":1}, + {"label":"F", "x":5, "y":1}, + {"label":"G", "x":6, "y":1}, + {"label":"H", "x":8, "y":1}, + {"label":"J", "x":9, "y":1}, + {"label":"K", "x":10, "y":1}, + {"label":"L", "x":11, "y":1}, + {"label":";:", "x":12, "y":1}, + {"label":"Enter", "x":13, "y":1, "w":1.75}, + + {"label":"Shift", "x":0.25, "y":2, "w":1.75}, + {"label":"Z", "x":2, "y":2}, + {"label":"X", "x":3, "y":2}, + {"label":"C", "x":4, "y":2}, + {"label":"V", "x":5, "y":2}, + {"label":"B", "x":6, "y":2}, + {"label":"N", "x":8, "y":2}, + {"label":"M", "x":9, "y":2}, + {"label":",<", "x":10, "y":2}, + {"label":".>", "x":11, "y":2}, + {"label":"/?", "x":12, "y":2}, + {"label":"Fn", "x":13, "y":2, "w":1.25}, + + {"label":"Ctrl", "x":0, "y":3}, + {"label":"GUI", "x":1, "y":3}, + {"label":"Alt", "x":4, "y":3}, + {"label":"Space", "x":5, "y":3}, + {"label":"Space", "x":6, "y":3}, + {"label":"Space", "x":8, "y":3}, + {"label":"Space", "x":9, "y":3}, + {"label":"Alt", "x":10, "y":3}, + {"label":"Ctrl", "x":13, "y":3} + ] + }, + "LAYOUT_2x2u": { + "layout": [ + {"label":"Esc", "x":1, "y":0}, + {"label":"Q", "x":2, "y":0}, + {"label":"W", "x":3, "y":0}, + {"label":"E", "x":4, "y":0}, + {"label":"R", "x":5, "y":0}, + {"label":"T", "x":6, "y":0}, + {"label":"Y", "x":8, "y":0}, + {"label":"U", "x":9, "y":0}, + {"label":"I", "x":10, "y":0}, + {"label":"O", "x":11, "y":0}, + {"label":"P", "x":12, "y":0}, + {"label":"Del", "x":13, "y":0}, + {"label":"Backspace", "x":14, "y":0}, + + {"label":"Tab", "x":0.75, "y":1, "w":1.25}, + {"label":"A", "x":2, "y":1}, + {"label":"S", "x":3, "y":1}, + {"label":"D", "x":4, "y":1}, + {"label":"F", "x":5, "y":1}, + {"label":"G", "x":6, "y":1}, + {"label":"H", "x":8, "y":1}, + {"label":"J", "x":9, "y":1}, + {"label":"K", "x":10, "y":1}, + {"label":"L", "x":11, "y":1}, + {"label":";:", "x":12, "y":1}, + {"label":"Enter", "x":13, "y":1, "w":1.75}, + + {"label":"Shift", "x":0.25, "y":2, "w":1.75}, + {"label":"Z", "x":2, "y":2}, + {"label":"X", "x":3, "y":2}, + {"label":"C", "x":4, "y":2}, + {"label":"V", "x":5, "y":2}, + {"label":"B", "x":6, "y":2}, + {"label":"N", "x":8, "y":2}, + {"label":"M", "x":9, "y":2}, + {"label":",<", "x":10, "y":2}, + {"label":".>", "x":11, "y":2}, + {"label":"/?", "x":12, "y":2}, + {"label":"Fn", "x":13, "y":2, "w":1.25}, + + {"label":"Ctrl", "x":0, "y":3}, + {"label":"GUI", "x":1, "y":3}, + {"label":"Alt", "x":4, "y":3}, + {"label":"Space", "x":5, "y":3, "w":2}, + {"label":"Space", "x":8, "y":3, "w":2}, + {"label":"Alt", "x":10, "y":3}, + {"label":"Ctrl", "x":13, "y":3} + ] } } -} \ No newline at end of file +} diff --git a/keyboards/ocean/wang_ergo/keymaps/default/keymap.c b/keyboards/ocean/wang_ergo/keymaps/default/keymap.c index 623f574cd2..a50dde256b 100644 --- a/keyboards/ocean/wang_ergo/keymaps/default/keymap.c +++ b/keyboards/ocean/wang_ergo/keymaps/default/keymap.c @@ -15,10 +15,10 @@ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( - KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, - KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, MO(1), - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_BSPC, KC_RCTL + [0] = LAYOUT_all( + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_BSPC, + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, MO(1), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RCTL ), }; diff --git a/keyboards/ocean/wang_ergo/keymaps/default_2x2u/keymap.c b/keyboards/ocean/wang_ergo/keymaps/default_2x2u/keymap.c new file mode 100644 index 0000000000..7177819e45 --- /dev/null +++ b/keyboards/ocean/wang_ergo/keymaps/default_2x2u/keymap.c @@ -0,0 +1,24 @@ +/* Copyright 2021 Ocean + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT_2x2u( + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_BSPC, + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, MO(1), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_RALT, KC_RCTL + ), +}; diff --git a/keyboards/ocean/wang_ergo/keymaps/via/keymap.c b/keyboards/ocean/wang_ergo/keymaps/via/keymap.c index 431dac64e4..c13785686f 100644 --- a/keyboards/ocean/wang_ergo/keymaps/via/keymap.c +++ b/keyboards/ocean/wang_ergo/keymaps/via/keymap.c @@ -15,31 +15,31 @@ #include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [0] = LAYOUT( - KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, - KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, MO(1), - KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_BSPC, KC_RCTL + [0] = LAYOUT_all( + KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_DEL, KC_BSPC, + KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, MO(1), + KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_SPC, KC_SPC, KC_RALT, KC_RCTL ), - [1] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + [1] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), - [2] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + [2] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), - [3] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS + [3] = LAYOUT_all( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS ), }; diff --git a/keyboards/ocean/wang_ergo/wang_ergo.h b/keyboards/ocean/wang_ergo/wang_ergo.h index c57cc6c671..68074c2998 100644 --- a/keyboards/ocean/wang_ergo/wang_ergo.h +++ b/keyboards/ocean/wang_ergo/wang_ergo.h @@ -17,15 +17,45 @@ #include "quantum.h" -#define LAYOUT(\ - K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, \ - K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \ - K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \ - K30, K31, K33, K34, K35, K36, K37, K38, K3A, K3B \ +#define XXX KC_NO + +/* + * ┌───┬───┬───┬───┬───┬───┐ ┌───┬───┬───┬───┬───┬───┬───┐ + * │00 │01 │02 │03 │04 │05 │ │06 │07 │08 │09 │0A │0B │3A │ + * ┌┴───┼───┼───┼───┼───┼───┤ ├───┼───┼───┼───┼───┼───┴──┬┘ + * │10 │11 │12 │13 │14 │15 │ │16 │17 │18 │19 │1A │1B │ + * ┌─┴────┼───┼───┼───┼───┼───┤ ├───┼───┼───┼───┼───┼────┬─┘ + * │20 │21 │22 │23 │24 │25 │ │26 │27 │28 │29 │2A │2B │ + * ┌┴──┬───┼───┴───┼───┼───┼───┤ ├───┼───┼───┼───┴───┼───┬┘ + * │30 │31 │ │33 │34 │35 │ │36 │37 │38 │ │3B │ + * └───┴───┘ └───┴───┴───┘ └───┴───┴───┘ └───┘ + * ┌───────┐ ┌───────┐ + * │35 │ │36 │ + * └───────┘ └───────┘ + */ + +#define LAYOUT_all(\ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K3A, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \ + K30, K31, K33, K34, K35, K36, K37, K38, K3B \ +) \ +{ \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B }, \ + { K30, K31, XXX, K33, K34, K35, K36, K37, K38, XXX, K3A, K3B }, \ +} + +#define LAYOUT_2x2u(\ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K3A, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, \ + K30, K31, K33, K35, K36, K38, K3B \ ) \ { \ - { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B }, \ - { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B }, \ - { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B }, \ - { K30, K31, KC_NO, K33, K34, K35, K36, K37, K38, KC_NO, K3A, K3B }, \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B }, \ + { K30, K31, XXX, K33, XXX, K35, K36, XXX, K38, XXX, K3A, K3B }, \ } From 08ce0142bad40f22d05d33fdef8a7c8907154e96 Mon Sep 17 00:00:00 2001 From: Zach White <skullydazed@gmail.com> Date: Mon, 22 Nov 2021 11:11:35 -0800 Subject: [PATCH 557/595] Macros in JSON keymaps (#14374) * macros in json keymaps * add advanced macro support to json * add a note about escaping macro strings * add simple examples * format json * add support for language specific keymap extras * switch to dictionaries instead of inline text for macros * use SS_TAP on the innermost tap keycode * add the new macro format to the schema * document the macro limit * add the json keyword for syntax highlighting * fix format that vscode screwed up * Update feature_macros.md * add tests for macros * change ding to beep * add json support for SENDSTRING_BELL * update doc based on feedback from sigprof * document host_layout * remove unused var * improve carriage return handling * support tab characters as well * Update docs/feature_macros.md Co-authored-by: Nick Brassel <nick@tzarc.org> * escape backslash characters * format * flake8 * Update quantum/quantum_keycodes.h Co-authored-by: Nick Brassel <nick@tzarc.org> --- data/mappings/info_config.json | 1 + data/schemas/keyboard.jsonschema | 1 + data/schemas/keymap.jsonschema | 35 ++++- docs/feature_macros.md | 134 +++++++++++++++--- keyboards/handwired/pytest/macro/.noci | 0 keyboards/handwired/pytest/macro/info.json | 10 ++ .../pytest/macro/keymaps/default/keymap.json | 15 ++ keyboards/handwired/pytest/macro/readme.md | 0 keyboards/handwired/pytest/macro/rules.mk | 1 + lib/python/qmk/cli/json2c.py | 2 +- lib/python/qmk/commands.py | 2 +- lib/python/qmk/keymap.py | 100 +++++++++++-- lib/python/qmk/tests/test_cli_commands.py | 8 ++ lib/python/qmk/tests/test_qmk_keymap.py | 8 +- quantum/quantum_keycodes.h | 34 +++++ requirements-dev.txt | 1 + 16 files changed, 319 insertions(+), 33 deletions(-) create mode 100644 keyboards/handwired/pytest/macro/.noci create mode 100644 keyboards/handwired/pytest/macro/info.json create mode 100644 keyboards/handwired/pytest/macro/keymaps/default/keymap.json create mode 100644 keyboards/handwired/pytest/macro/readme.md create mode 100644 keyboards/handwired/pytest/macro/rules.mk diff --git a/data/mappings/info_config.json b/data/mappings/info_config.json index 50694e3863..3cb64dd3a2 100644 --- a/data/mappings/info_config.json +++ b/data/mappings/info_config.json @@ -76,6 +76,7 @@ "QMK_KEYS_PER_SCAN": {"info_key": "qmk.keys_per_scan", "value_type": "int"}, "QMK_LED": {"info_key": "qmk_lufa_bootloader.led"}, "QMK_SPEAKER": {"info_key": "qmk_lufa_bootloader.speaker"}, + "SENDSTRING_BELL": {"info_key": "audio.macro_beep", "value_type": "bool"}, "SPLIT_MODS_ENABLE": {"info_key": "split.transport.sync_modifiers", "value_type": "bool"}, "SPLIT_TRANSPORT_MIRROR": {"info_key": "split.transport.sync_matrix_state", "value_type": "bool"}, "SPLIT_USB_DETECT": {"info_key": "split.usb_detect.enabled", "value_type": "bool"}, diff --git a/data/schemas/keyboard.jsonschema b/data/schemas/keyboard.jsonschema index 65d44c94d2..37a0643ab2 100644 --- a/data/schemas/keyboard.jsonschema +++ b/data/schemas/keyboard.jsonschema @@ -19,6 +19,7 @@ "type": "object", "additionalProperties": false, "properties": { + "macro_beep": {"type": "boolean"}, "pins": {"$ref": "qmk.definitions.v1#/mcu_pin_array"}, "voices": {"type": "boolean"} } diff --git a/data/schemas/keymap.jsonschema b/data/schemas/keymap.jsonschema index a4bdab966b..faa250a942 100644 --- a/data/schemas/keymap.jsonschema +++ b/data/schemas/keymap.jsonschema @@ -5,6 +5,7 @@ "type": "object", "properties": { "author": {"type": "string"}, + "host_language": {"$ref": "qmk.definitions.v1#/text_identifier"}, "keyboard": {"$ref": "qmk.definitions.v1#/text_identifier"}, "keymap": {"$ref": "qmk.definitions.v1#/text_identifier"}, "layout": {"$ref": "qmk.definitions.v1#/layout_macro"}, @@ -15,10 +16,42 @@ "items": {"type": "string"} } }, + "macros": { + "type": "array", + "items": { + "type": "array", + "items": { + "oneOf": [ + { + "type": "string" + }, + { + "type": "object", + "additionalProperties": false, + "properties": { + "action": { + "type": "string", + "enum": ['beep', 'delay', 'down', 'tap', 'up'] + }, + "keycodes": { + "type": "array", + "items": { + "$ref": "qmk.definitions.v1#/text_identifier" + } + }, + "duration": { + "$ref": "qmk.definitions.v1#/unsigned_int" + } + } + } + ] + } + } + }, "config": {"$ref": "qmk.keyboard.v1"}, "notes": { "type": "string", "description": "asdf" } } -} \ No newline at end of file +} diff --git a/docs/feature_macros.md b/docs/feature_macros.md index 6807111ca2..81ade58592 100644 --- a/docs/feature_macros.md +++ b/docs/feature_macros.md @@ -4,7 +4,107 @@ Macros allow you to send multiple keystrokes when pressing just one key. QMK has !> **Security Note**: While it is possible to use macros to send passwords, credit card numbers, and other sensitive information it is a supremely bad idea to do so. Anyone who gets a hold of your keyboard will be able to access that information by opening a text editor. -## `SEND_STRING()` & `process_record_user` +## Using Macros In JSON Keymaps + +You can define up to 32 macros in a `keymap.json` file, as used by [Configurator](newbs_building_firmware_configurator.md), and `qmk compile`. You can define these macros in a list under the `macros` keyword, like this: + +```json +{ + "keyboard": "handwired/my_macropad", + "keymap": "my_keymap", + "macros": [ + [ + {"action":"down", "keycodes": ["LSFT"]}, + "hello world1", + {"action": "up","keycodes": ["LSFT"]} + ], + [ + {"action":"tap", "keycodes": ["LCTL", "LALT", "DEL"]} + ], + [ + "ding!", + {"action":"beep"} + ], + [ + {"action":"tap", "keycodes": ["F1"]}, + {"action":"delay", "duration": "1000"}, + {"action":"tap", "keycodes": ["PGDN"]} + ] + ], + "layout": "LAYOUT_all", + "layers": [ + ["MACRO_0", "MACRO_1", "MACRO_2", "MACRO_3"] + ] +} +``` + +### Selecting Your Host Keyboard Layout + +If you type in a language other than English, or use a non-QWERTY layout like Colemak, Dvorak, or Workman, you may have set your computer's input language to match this layout. This presents a challenge when creating macros- you may need to type different keys to get the same letters! To address this you can add the `host_language` key to your keymap.json, like so: + +```json +{ + "keyboard": "handwired/my_macropad", + "keymap": "my_keymap", + "host_layout": "dvorak", + "macros": [ + ["Hello, World!"] + ], + "layout": "LAYOUT_all", + "layers": [ + ["MACRO_0"] + ] +} +``` + +The current list of available languages is: + +| belgian | bepo | br_abnt2 | canadian_multilingual | +|:-------:|:----:|:--------:|:---------------------:| +| **colemak** | **croatian** | **czech** | **danish** | +| **dvorak_fr** | **dvorak** | **dvp** | **estonian** | +| **finnish** | **fr_ch** | **french_afnor** | **french** | +| **french_osx** | **german_ch** | **german** | **german_osx** | +| **hungarian** | **icelandic** | **italian** | **italian_osx_ansi** | +| **italian_osx_iso** | **jis** | **latvian** | **lithuanian_azerty** | +| **lithuanian_qwerty** | **norman** | **norwegian** | **portuguese** | +| **portuguese_osx_iso** | **romanian** | **serbian_latin** | **slovak** | +| **slovenian** | **spanish_dvorak** | **spanish** | **swedish** | +| **turkish_f** | **turkish_q** | **uk** | **us_international** | +| **workman** | **workman_zxcvm** | + +### Macro Basics + +Each macro is an array consisting of strings and objects (dictionaries.) Strings are typed to your computer while objects allow you to control how your macro is typed out. + +#### Object Format + +All objects have one required key: `action`. This tells QMK what the object does. There are currently 5 actions: beep, delay, down, tap, up + +Only basic keycodes (prefixed by `KC_`) are supported. Do not include the `KC_` prefix when listing keycodes. + +* `beep` + * Play a bell if the keyboard has [audio enabled](feature_audio.md). + * Example: `{"action": "beep"}` +* `delay` + * Pause macro playback. Duration is specified in milliseconds (ms). + * Example: `{"action": "delay", "duration": 500}` +* `down` + * Send a key down event for one or more keycodes. + * Example, single key: `{"action":"down", "keycodes": ["LSFT"]}` + * Example, multiple keys: `{"action":"down", "keycodes": ["CTRL", "LSFT"]}` +* `tap` + * Type a chord, which sends a down event for each key followed by an up event for each key. + * Example, single key: `{"action":"tap", "keycodes": ["F13"]}` + * Example, multiple keys: `{"action":"tap", "keycodes": ["CTRL", "LALT", "DEL"]}` +* `up` + * Send a key up event for one or more keycodes. + * Example, single key: `{"action":"up", "keycodes": ["LSFT"]}` + * Example, multiple keys: `{"action":"up", "keycodes": ["CTRL", "LSFT"]}` + +## Using Macros in C Keymaps + +### `SEND_STRING()` & `process_record_user` Sometimes you want a key to type out words or phrases. For the most common situations, we've provided `SEND_STRING()`, which will type out a string (i.e. a sequence of characters) for you. All ASCII characters that are easily translatable to a keycode are supported (e.g. `qmk 123\n\t`). @@ -91,7 +191,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { }; ``` -### Advanced Macros +#### Advanced Macros In addition to the `process_record_user()` function, is the `post_process_record_user()` function. This runs after `process_record` and can be used to do things after a keystroke has been sent. This is useful if you want to have a key pressed before and released after a normal key, for instance. @@ -131,7 +231,7 @@ void post_process_record_user(uint16_t keycode, keyrecord_t *record) { ``` -### TAP, DOWN and UP +#### TAP, DOWN and UP You may want to use keys in your macros that you can't write down, such as `Ctrl` or `Home`. You can send arbitrary keycodes by wrapping them in: @@ -178,7 +278,7 @@ They can be used like this: Which would send Left Control+`a` (Left Control down, `a`, Left Control up) - notice that they take strings (eg `"k"`), and not the `X_K` keycodes. -### Alternative Keymaps +#### Alternative Keymaps By default, it assumes a US keymap with a QWERTY layout; if you want to change that (e.g. if your OS uses software Colemak), include this somewhere in your keymap: @@ -186,7 +286,7 @@ By default, it assumes a US keymap with a QWERTY layout; if you want to change t #include "sendstring_colemak.h" ``` -### Strings in Memory +#### Strings in Memory If for some reason you're manipulating strings and need to print out something you just generated (instead of being a literal, constant string), you can use `send_string()`, like this: @@ -205,13 +305,13 @@ SEND_STRING(".."SS_TAP(X_END)); ``` -## Advanced Macro Functions +### Advanced Macro Functions There are some functions you may find useful in macro-writing. Keep in mind that while you can write some fairly advanced code within a macro, if your functionality gets too complex you may want to define a custom keycode instead. Macros are meant to be simple. ?> You can also use the functions described in [Useful function](ref_functions.md) and [Checking modifier state](feature_advanced_keycodes#checking-modifier-state) for additional functionality. For example, `reset_keyboard()` allows you to reset the keyboard as part of a macro and `get_mods() & MOD_MASK_SHIFT` lets you check for the existence of active shift modifiers. -### `record->event.pressed` +#### `record->event.pressed` This is a boolean value that can be tested to see if the switch is being pressed or released. An example of this is @@ -223,15 +323,15 @@ This is a boolean value that can be tested to see if the switch is being pressed } ``` -### `register_code(<kc>);` +#### `register_code(<kc>);` This sends the `<kc>` keydown event to the computer. Some examples would be `KC_ESC`, `KC_C`, `KC_4`, and even modifiers such as `KC_LSFT` and `KC_LGUI`. -### `unregister_code(<kc>);` +#### `unregister_code(<kc>);` Parallel to `register_code` function, this sends the `<kc>` keyup event to the computer. If you don't use this, the key will be held down until it's sent. -### `tap_code(<kc>);` +#### `tap_code(<kc>);` Sends `register_code(<kc>)` and then `unregister_code(<kc>)`. This is useful if you want to send both the press and release events ("tap" the key, rather than hold it). @@ -239,31 +339,31 @@ If `TAP_CODE_DELAY` is defined (default 0), this function waits that many millis If the keycode is `KC_CAPS`, it waits `TAP_HOLD_CAPS_DELAY` milliseconds instead (default 80), as macOS prevents accidental Caps Lock activation by waiting for the key to be held for a certain amount of time. -### `tap_code_delay(<kc>, <delay>);` +#### `tap_code_delay(<kc>, <delay>);` Like `tap_code(<kc>)`, but with a `delay` parameter for specifying arbitrary intervals before sending the unregister event. -### `register_code16(<kc>);`, `unregister_code16(<kc>);` and `tap_code16(<kc>);` +#### `register_code16(<kc>);`, `unregister_code16(<kc>);` and `tap_code16(<kc>);` These functions work similar to their regular counterparts, but allow you to use modded keycodes (with Shift, Alt, Control, and/or GUI applied to them). Eg, you could use `register_code16(S(KC_5));` instead of registering the mod, then registering the keycode. -### `clear_keyboard();` +#### `clear_keyboard();` This will clear all mods and keys currently pressed. -### `clear_mods();` +#### `clear_mods();` This will clear all mods currently pressed. -### `clear_keyboard_but_mods();` +#### `clear_keyboard_but_mods();` This will clear all keys besides the mods currently pressed. -## Advanced Example: +### Advanced Example: -### Super ALT↯TAB +#### Super ALT↯TAB This macro will register `KC_LALT` and tap `KC_TAB`, then wait for 1000ms. If the key is tapped again, it will send another `KC_TAB`; if there is no tap, `KC_LALT` will be unregistered, thus allowing you to cycle through windows. diff --git a/keyboards/handwired/pytest/macro/.noci b/keyboards/handwired/pytest/macro/.noci new file mode 100644 index 0000000000..e69de29bb2 diff --git a/keyboards/handwired/pytest/macro/info.json b/keyboards/handwired/pytest/macro/info.json new file mode 100644 index 0000000000..ed052a14a3 --- /dev/null +++ b/keyboards/handwired/pytest/macro/info.json @@ -0,0 +1,10 @@ +{ + "maintainer": "qmk", + "layouts": { + "LAYOUT_custom": { + "layout": [ + { "label": "KC_Q", "matrix": [0, 0], "w": 1, "x": 0, "y": 0 } + ] + } + } +} diff --git a/keyboards/handwired/pytest/macro/keymaps/default/keymap.json b/keyboards/handwired/pytest/macro/keymaps/default/keymap.json new file mode 100644 index 0000000000..f319d862d8 --- /dev/null +++ b/keyboards/handwired/pytest/macro/keymaps/default/keymap.json @@ -0,0 +1,15 @@ +{ + "keyboard": "handwired/pytest/basic", + "keymap": "default_json", + "layout": "LAYOUT_ortho_1x1", + "layers": [["MACRO_0"]], + "macros": [ + [ + "Hello, World!", + {"action":"tap", "keycodes":["ENTER"]} + ] + ], + "author": "qmk", + "notes": "This file is a keymap.json file for handwired/pytest/basic", + "version": 1 +} diff --git a/keyboards/handwired/pytest/macro/readme.md b/keyboards/handwired/pytest/macro/readme.md new file mode 100644 index 0000000000..e69de29bb2 diff --git a/keyboards/handwired/pytest/macro/rules.mk b/keyboards/handwired/pytest/macro/rules.mk new file mode 100644 index 0000000000..6b42774dbf --- /dev/null +++ b/keyboards/handwired/pytest/macro/rules.mk @@ -0,0 +1 @@ +MCU = atmega32u4 diff --git a/lib/python/qmk/cli/json2c.py b/lib/python/qmk/cli/json2c.py index a90578c021..ae8248e6b7 100755 --- a/lib/python/qmk/cli/json2c.py +++ b/lib/python/qmk/cli/json2c.py @@ -33,7 +33,7 @@ def json2c(cli): cli.args.output = None # Generate the keymap - keymap_c = qmk.keymap.generate_c(user_keymap['keyboard'], user_keymap['layout'], user_keymap['layers']) + keymap_c = qmk.keymap.generate_c(user_keymap) if cli.args.output: cli.args.output.parent.mkdir(parents=True, exist_ok=True) diff --git a/lib/python/qmk/commands.py b/lib/python/qmk/commands.py index 2995a5fdab..5a01943773 100644 --- a/lib/python/qmk/commands.py +++ b/lib/python/qmk/commands.py @@ -190,7 +190,7 @@ def compile_configurator_json(user_keymap, bootloader=None, parallel=1, **env_va target = f'{keyboard_filesafe}_{user_keymap["keymap"]}' keyboard_output = Path(f'{KEYBOARD_OUTPUT_PREFIX}{keyboard_filesafe}') keymap_output = Path(f'{keyboard_output}_{user_keymap["keymap"]}') - c_text = qmk.keymap.generate_c(user_keymap['keyboard'], user_keymap['layout'], user_keymap['layers']) + c_text = qmk.keymap.generate_c(user_keymap) keymap_dir = keymap_output / 'src' keymap_c = keymap_dir / 'keymap.c' diff --git a/lib/python/qmk/keymap.py b/lib/python/qmk/keymap.py index 6eec49cfd1..00b5a78a5a 100644 --- a/lib/python/qmk/keymap.py +++ b/lib/python/qmk/keymap.py @@ -17,6 +17,7 @@ from qmk.errors import CppError # The `keymap.c` template to use when a keyboard doesn't have its own DEFAULT_KEYMAP_C = """#include QMK_KEYBOARD_H +__INCLUDES__ /* THIS FILE WAS GENERATED! * @@ -27,6 +28,7 @@ DEFAULT_KEYMAP_C = """#include QMK_KEYBOARD_H const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { __KEYMAP_GOES_HERE__ }; + """ @@ -180,10 +182,11 @@ def generate_json(keymap, keyboard, layout, layers): return new_keymap -def generate_c(keyboard, layout, layers): - """Returns a `keymap.c` or `keymap.json` for the specified keyboard, layout, and layers. +def generate_c(keymap_json): + """Returns a `keymap.c`. + + `keymap_json` is a dictionary with the following keys: - Args: keyboard The name of the keyboard @@ -192,19 +195,89 @@ def generate_c(keyboard, layout, layers): layers An array of arrays describing the keymap. Each item in the inner array should be a string that is a valid QMK keycode. + + macros + A sequence of strings containing macros to implement for this keyboard. """ - new_keymap = template_c(keyboard) + new_keymap = template_c(keymap_json['keyboard']) layer_txt = [] - for layer_num, layer in enumerate(layers): + + for layer_num, layer in enumerate(keymap_json['layers']): if layer_num != 0: layer_txt[-1] = layer_txt[-1] + ',' layer = map(_strip_any, layer) layer_keys = ', '.join(layer) - layer_txt.append('\t[%s] = %s(%s)' % (layer_num, layout, layer_keys)) + layer_txt.append('\t[%s] = %s(%s)' % (layer_num, keymap_json['layout'], layer_keys)) keymap = '\n'.join(layer_txt) new_keymap = new_keymap.replace('__KEYMAP_GOES_HERE__', keymap) + if keymap_json.get('macros'): + macro_txt = [ + 'bool process_record_user(uint16_t keycode, keyrecord_t *record) {', + ' if (record->event.pressed) {', + ' switch (keycode) {', + ] + + for i, macro_array in enumerate(keymap_json['macros']): + macro = [] + + for macro_fragment in macro_array: + if isinstance(macro_fragment, str): + macro_fragment = macro_fragment.replace('\\', '\\\\') + macro_fragment = macro_fragment.replace('\r\n', r'\n') + macro_fragment = macro_fragment.replace('\n', r'\n') + macro_fragment = macro_fragment.replace('\r', r'\n') + macro_fragment = macro_fragment.replace('\t', r'\t') + macro_fragment = macro_fragment.replace('"', r'\"') + + macro.append(f'"{macro_fragment}"') + + elif isinstance(macro_fragment, dict): + newstring = [] + + if macro_fragment['action'] == 'delay': + newstring.append(f"SS_DELAY({macro_fragment['duration']})") + + elif macro_fragment['action'] == 'beep': + newstring.append(r'"\a"') + + elif macro_fragment['action'] == 'tap' and len(macro_fragment['keycodes']) > 1: + last_keycode = macro_fragment['keycodes'].pop() + + for keycode in macro_fragment['keycodes']: + newstring.append(f'SS_DOWN(X_{keycode})') + + newstring.append(f'SS_TAP(X_{last_keycode})') + + for keycode in reversed(macro_fragment['keycodes']): + newstring.append(f'SS_UP(X_{keycode})') + + else: + for keycode in macro_fragment['keycodes']: + newstring.append(f"SS_{macro_fragment['action'].upper()}(X_{keycode})") + + macro.append(''.join(newstring)) + + new_macro = "".join(macro) + new_macro = new_macro.replace('""', '') + macro_txt.append(f' case MACRO_{i}:') + macro_txt.append(f' SEND_STRING({new_macro});') + macro_txt.append(' return false;') + + macro_txt.append(' }') + macro_txt.append(' }') + macro_txt.append('\n return true;') + macro_txt.append('};') + macro_txt.append('') + + new_keymap = '\n'.join((new_keymap, *macro_txt)) + + if keymap_json.get('host_language'): + new_keymap = new_keymap.replace('__INCLUDES__', f'#include "keymap_{keymap_json["host_language"]}.h"\n#include "sendstring_{keymap_json["host_language"]}.h"\n') + else: + new_keymap = new_keymap.replace('__INCLUDES__', '') + return new_keymap @@ -217,7 +290,7 @@ def write_file(keymap_filename, keymap_content): return keymap_filename -def write_json(keyboard, keymap, layout, layers): +def write_json(keyboard, keymap, layout, layers, macros=None): """Generate the `keymap.json` and write it to disk. Returns the filename written to. @@ -235,19 +308,19 @@ def write_json(keyboard, keymap, layout, layers): layers An array of arrays describing the keymap. Each item in the inner array should be a string that is a valid QMK keycode. """ - keymap_json = generate_json(keyboard, keymap, layout, layers) + keymap_json = generate_json(keyboard, keymap, layout, layers, macros=None) keymap_content = json.dumps(keymap_json) keymap_file = qmk.path.keymap(keyboard) / keymap / 'keymap.json' return write_file(keymap_file, keymap_content) -def write(keyboard, keymap, layout, layers): +def write(keymap_json): """Generate the `keymap.c` and write it to disk. Returns the filename written to. - Args: + `keymap_json` should be a dict with the following keys: keyboard The name of the keyboard @@ -259,9 +332,12 @@ def write(keyboard, keymap, layout, layers): layers An array of arrays describing the keymap. Each item in the inner array should be a string that is a valid QMK keycode. + + macros + A list of macros for this keymap. """ - keymap_content = generate_c(keyboard, layout, layers) - keymap_file = qmk.path.keymap(keyboard) / keymap / 'keymap.c' + keymap_content = generate_c(keymap_json) + keymap_file = qmk.path.keymap(keymap_json['keyboard']) / keymap_json['keymap'] / 'keymap.c' return write_file(keymap_file, keymap_content) diff --git a/lib/python/qmk/tests/test_cli_commands.py b/lib/python/qmk/tests/test_cli_commands.py index 1e3c64e735..2973f81702 100644 --- a/lib/python/qmk/tests/test_cli_commands.py +++ b/lib/python/qmk/tests/test_cli_commands.py @@ -142,6 +142,14 @@ def test_json2c(): assert result.stdout == '#include QMK_KEYBOARD_H\nconst uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {\t[0] = LAYOUT_ortho_1x1(KC_A)};\n\n' +def test_json2c_macros(): + result = check_subcommand("json2c", 'keyboards/handwired/pytest/macro/keymaps/default/keymap.json') + check_returncode(result) + assert 'LAYOUT_ortho_1x1(MACRO_0)' in result.stdout + assert 'case MACRO_0:' in result.stdout + assert 'SEND_STRING("Hello, World!"SS_TAP(X_ENTER));' in result.stdout + + def test_json2c_stdin(): result = check_subcommand_stdin('keyboards/handwired/pytest/has_template/keymaps/default_json/keymap.json', 'json2c', '-') check_returncode(result) diff --git a/lib/python/qmk/tests/test_qmk_keymap.py b/lib/python/qmk/tests/test_qmk_keymap.py index b9e80df672..5e2efc1232 100644 --- a/lib/python/qmk/tests/test_qmk_keymap.py +++ b/lib/python/qmk/tests/test_qmk_keymap.py @@ -22,7 +22,13 @@ def test_template_json_pytest_has_template(): def test_generate_c_pytest_has_template(): - templ = qmk.keymap.generate_c('handwired/pytest/has_template', 'LAYOUT', [['KC_A']]) + keymap_json = { + 'keyboard': 'handwired/pytest/has_template', + 'layout': 'LAYOUT', + 'layers': [['KC_A']], + 'macros': None, + } + templ = qmk.keymap.generate_c(keymap_json) assert templ == '#include QMK_KEYBOARD_H\nconst uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {\t[0] = LAYOUT(KC_A)};\n' diff --git a/quantum/quantum_keycodes.h b/quantum/quantum_keycodes.h index cde97074d3..d013a6a169 100644 --- a/quantum/quantum_keycodes.h +++ b/quantum/quantum_keycodes.h @@ -558,6 +558,40 @@ enum quantum_keycodes { PROGRAMMABLE_BUTTON_31, PROGRAMMABLE_BUTTON_32, + // Dedicated macro keys for Configurator and VIA + MACRO_0, + MACRO_1, + MACRO_2, + MACRO_3, + MACRO_4, + MACRO_5, + MACRO_6, + MACRO_7, + MACRO_8, + MACRO_9, + MACRO_10, + MACRO_11, + MACRO_12, + MACRO_13, + MACRO_14, + MACRO_15, + MACRO_16, + MACRO_17, + MACRO_18, + MACRO_19, + MACRO_20, + MACRO_21, + MACRO_22, + MACRO_23, + MACRO_24, + MACRO_25, + MACRO_26, + MACRO_27, + MACRO_28, + MACRO_29, + MACRO_30, + MACRO_31, + // Start of custom keycode range for keyboards and keymaps - always leave at the end SAFE_RANGE }; diff --git a/requirements-dev.txt b/requirements-dev.txt index 1db3b6d733..7213707338 100644 --- a/requirements-dev.txt +++ b/requirements-dev.txt @@ -5,4 +5,5 @@ nose2 flake8 pep8-naming +pyflakes yapf From a726b87db5726ce9cbe461c7d3cdfc1fad316a91 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre <drashna@live.com> Date: Mon, 22 Nov 2021 11:59:47 -0800 Subject: [PATCH 558/595] [Keyboard] Enable LTO on viktus/sp_mini via keymap (#15263) --- keyboards/viktus/sp_mini/keymaps/via/rules.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/keyboards/viktus/sp_mini/keymaps/via/rules.mk b/keyboards/viktus/sp_mini/keymaps/via/rules.mk index 16d33cd89f..36b7ba9cbc 100644 --- a/keyboards/viktus/sp_mini/keymaps/via/rules.mk +++ b/keyboards/viktus/sp_mini/keymaps/via/rules.mk @@ -1,2 +1,2 @@ VIA_ENABLE = yes - +LTO_ENABLE = yes From e8ce66a0d304cc68fb1312349d5146aab244653d Mon Sep 17 00:00:00 2001 From: Drashna Jaelre <drashna@live.com> Date: Mon, 22 Nov 2021 12:00:52 -0800 Subject: [PATCH 559/595] [Keymap] Disable console on Sofle default keymap (#15261) --- keyboards/sofle/keymaps/default/rules.mk | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/keyboards/sofle/keymaps/default/rules.mk b/keyboards/sofle/keymaps/default/rules.mk index e87a55ede4..c21a769a2e 100644 --- a/keyboards/sofle/keymaps/default/rules.mk +++ b/keyboards/sofle/keymaps/default/rules.mk @@ -2,5 +2,5 @@ OLED_ENABLE = yes OLED_DRIVER = SSD1306 ENCODER_ENABLE = yes -CONSOLE_ENABLE = yes +CONSOLE_ENABLE = no EXTRAKEY_ENABLE = yes From 97a32eedf1cebc1fdd771d0c67ee8320c06e8d99 Mon Sep 17 00:00:00 2001 From: precondition <57645186+precondition@users.noreply.github.com> Date: Mon, 22 Nov 2021 20:01:39 +0000 Subject: [PATCH 560/595] =?UTF-8?q?layer=5Fcombo=20=E2=86=92=20sd=5Fcombo?= =?UTF-8?q?=20(#15266)?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- docs/feature_combo.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/docs/feature_combo.md b/docs/feature_combo.md index d98e6f2ac7..b3914b78ab 100644 --- a/docs/feature_combo.md +++ b/docs/feature_combo.md @@ -56,7 +56,7 @@ combo_t key_combos[COMBO_COUNT] = { [AB_ESC] = COMBO(ab_combo, KC_ESC), [JK_TAB] = COMBO(jk_combo, KC_TAB), [QW_SFT] = COMBO(qw_combo, KC_LSFT) - [SD_LAYER] = COMBO(layer_combo, MO(_LAYER)), + [SD_LAYER] = COMBO(sd_combo, MO(_LAYER)), }; ``` From 3f656d54d3a60e0b1c932ea8412966c0b9c497a0 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre <drashna@live.com> Date: Mon, 22 Nov 2021 12:32:51 -0800 Subject: [PATCH 561/595] [Keyboard] Disable console on Keebio foldkb and iris rev3 (#15260) --- keyboards/keebio/foldkb/keymaps/via/rules.mk | 2 +- keyboards/keebio/foldkb/rules.mk | 2 +- keyboards/keebio/iris/rev3/rules.mk | 4 ++-- 3 files changed, 4 insertions(+), 4 deletions(-) diff --git a/keyboards/keebio/foldkb/keymaps/via/rules.mk b/keyboards/keebio/foldkb/keymaps/via/rules.mk index 4b1bcabda8..eec3596d0d 100644 --- a/keyboards/keebio/foldkb/keymaps/via/rules.mk +++ b/keyboards/keebio/foldkb/keymaps/via/rules.mk @@ -1,3 +1,3 @@ VIA_ENABLE = yes -CONSOLE_ENABLE = yes +CONSOLE_ENABLE = no LTO_ENABLE = yes diff --git a/keyboards/keebio/foldkb/rules.mk b/keyboards/keebio/foldkb/rules.mk index 96e4128903..7fedb2e052 100644 --- a/keyboards/keebio/foldkb/rules.mk +++ b/keyboards/keebio/foldkb/rules.mk @@ -10,7 +10,7 @@ BOOTLOADER = atmel-dfu BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug +CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend diff --git a/keyboards/keebio/iris/rev3/rules.mk b/keyboards/keebio/iris/rev3/rules.mk index c5cae9bdb7..72b2e8c3bc 100644 --- a/keyboards/keebio/iris/rev3/rules.mk +++ b/keyboards/keebio/iris/rev3/rules.mk @@ -12,7 +12,7 @@ BOOTLOADER = qmk-dfu BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control -CONSOLE_ENABLE = yes # Console for debug +CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality @@ -23,4 +23,4 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend SPLIT_KEYBOARD = yes ENCODER_ENABLE = yes -LTO_ENABLE = yes \ No newline at end of file +LTO_ENABLE = yes From 32a87d3517f086f6c76e9f3416a4b8fcff5ae626 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre <drashna@live.com> Date: Mon, 22 Nov 2021 13:13:22 -0800 Subject: [PATCH 562/595] Add uint to char functions (#15244) * Add uint to char functions * appease the all mighty lint * Further appease Lint * Update functions * Add doxygen comment * Update quantum/quantum.c Co-authored-by: Nick Brassel <nick@tzarc.org> * Apply suggestions from code review Co-authored-by: Nick Brassel <nick@tzarc.org> * Add declaration for get_numeric_string * fix formatting and bug Co-authored-by: Nick Brassel <nick@tzarc.org> --- quantum/quantum.c | 56 +++++++++++++++++++++++++++++++++++++++++++++++ quantum/quantum.h | 4 ++++ 2 files changed, 60 insertions(+) diff --git a/quantum/quantum.c b/quantum/quantum.c index c7a3bb1970..ba3ae03457 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -572,3 +572,59 @@ __attribute__((weak)) void suspend_wakeup_init_quantum(void) { #endif suspend_wakeup_init_kb(); } + +/** \brief converts unsigned integers into char arrays + * + * Takes an unsigned integer and converts that value into an equivalent char array + * A padding character may be specified, ' ' for leading spaces, '0' for leading zeros. + */ + +const char *get_numeric_str(char *buf, size_t buf_len, uint32_t curr_num, char curr_pad) { + buf[buf_len - 1] = '\0'; + for (size_t i = 0; i < buf_len - 1; ++i) { + char c = '0' + curr_num % 10; + buf[buf_len - 2 - i] = (c == '0' && i == 0) ? '0' : (curr_num > 0 ? c : curr_pad); + curr_num /= 10; + } + return buf; +} + +/** \brief converts uint8_t into char array + * + * Takes an uint8_t, and uses an internal static buffer to render that value into a char array + * A padding character may be specified, ' ' for leading spaces, '0' for leading zeros. + * + * NOTE: Subsequent invocations will reuse the same static buffer and overwrite the previous + * contents. Use the result immediately, instead of caching it. + */ +const char *get_u8_str(uint8_t curr_num, char curr_pad) { + static char buf[4] = {0}; + static uint8_t last_num = 0xFF; + static char last_pad = '\0'; + if (last_num == curr_num && last_pad == curr_pad) { + return buf; + } + last_num = curr_num; + last_pad = curr_pad; + return get_numeric_str(buf, sizeof(buf), curr_num, curr_pad); +} + +/** \brief converts uint16_t into char array + * + * Takes an uint16_t, and uses an internal static buffer to render that value into a char array + * A padding character may be specified, ' ' for leading spaces, '0' for leading zeros. + * + * NOTE: Subsequent invocations will reuse the same static buffer and overwrite the previous + * contents. Use the result immediately, instead of caching it. + */ +const char *get_u16_str(uint16_t curr_num, char curr_pad) { + static char buf[6] = {0}; + static uint16_t last_num = 0xFF; + static char last_pad = '\0'; + if (last_num == curr_num && last_pad == curr_pad) { + return buf; + } + last_num = curr_num; + last_pad = curr_pad; + return get_numeric_str(buf, sizeof(buf), curr_num, curr_pad); +} diff --git a/quantum/quantum.h b/quantum/quantum.h index b34ff6ec51..45050ac0ea 100644 --- a/quantum/quantum.h +++ b/quantum/quantum.h @@ -245,3 +245,7 @@ void led_set_user(uint8_t usb_led); void led_set_kb(uint8_t usb_led); bool led_update_user(led_t led_state); bool led_update_kb(led_t led_state); + +const char *get_numeric_str(char *buf, size_t buf_len, uint32_t curr_num, char curr_pad); +const char *get_u8_str(uint8_t curr_num, char curr_pad); +const char *get_u16_str(uint16_t curr_num, char curr_pad); From f4966a19d69a7f3bbefeea0537071d7d7c2abbdd Mon Sep 17 00:00:00 2001 From: Drashna Jaelre <drashna@live.com> Date: Mon, 22 Nov 2021 13:14:00 -0800 Subject: [PATCH 563/595] [Docs] Squeezing space out of AVR (#15243) * [Docs] Squeezing space out of AVR * Add more info * Apply suggestions from code review Co-authored-by: Nick Brassel <nick@tzarc.org> * Add oled section * Apply suggestions from code review Co-authored-by: Nick Brassel <nick@tzarc.org> * Update layers and intro wording * Rename doc file * add get_u8_str support * oled clarifications Co-authored-by: Nick Brassel <nick@tzarc.org> Co-authored-by: Nick Brassel <nick@tzarc.org> --- docs/_summary.md | 1 + docs/squeezing_avr.md | 180 ++++++++++++++++++++++++++++++++++++++++++ docs/syllabus.md | 1 + 3 files changed, 182 insertions(+) create mode 100644 docs/squeezing_avr.md diff --git a/docs/_summary.md b/docs/_summary.md index 4b528d9967..18841819eb 100644 --- a/docs/_summary.md +++ b/docs/_summary.md @@ -13,6 +13,7 @@ * [Troubleshooting QMK](faq_misc.md) * [Debugging QMK](faq_debug.md) * [Keymap FAQ](faq_keymap.md) + * [Squeezing Space from AVR](squeezing_avr.md) * [Glossary](reference_glossary.md) * Configurator diff --git a/docs/squeezing_avr.md b/docs/squeezing_avr.md new file mode 100644 index 0000000000..f48643d1d9 --- /dev/null +++ b/docs/squeezing_avr.md @@ -0,0 +1,180 @@ +# Squeezing the most out of AVR + +AVR is severely resource-constrained, and as QMK continues to grow, it is approaching a point where support for AVR may need to be moved to legacy status as newer development is unable to fit into those constraints. + +However, if you need to reduce the compiled size of your firmware, there are a number of options to do so. + +## `rules.mk` Settings +First and foremost is enabling link time optimization. To do so, add this to your rules.mk: +```make +LTO_ENABLE = yes +``` +This will cause the final step to take longer, but should get you a smaller compiled size. This also disables Action Functions, and Action Macros, both of which are deprecated. +This will get you the most savings, in most situations. + +From there, disabling extraneous systems will help -- e.g.: +```make +CONSOLE_ENABLE = no +COMMAND_ENABLE = no +MOUSEKEY_ENABLE = no +EXTRAKEY_ENABLE = no +``` +This disables some of the functionality that you may not need. But note that extrakeys disables stuff like the media keys and system volume control. + +If that isn't enough to get your firmware down to size, then there are some additional features that you can disable: +```make +SPACE_CADET_ENABLE = no +GRAVE_ESC_ENABLE = no +MAGIC_ENABLE = no +``` +These features are enabled by default, but may not be needed. Double check to make sure, though. +Largest in size is "magic" -- the QMK magic keycodes -- which control things like NKRO toggling, GUI and ALT/CTRL swapping, etc. Disabling it will disable those functions. + +## `config.h` Settings + +If you've done all of that, and you don't want to disable features like RGB, Audio, OLEDs, etc, there are some additional options that you can add to your config.h that can help. + +Starting with Lock Key support. If you have an Cherry MX Lock switch (lucky you!), you don't want to do this. But chances are, you don't. In that case, add this to your `config.h`: +```c +#undef LOCKING_SUPPORT_ENABLE +#undef LOCKING_RESYNC_ENABLE +``` +Oneshots. If you're not using these, you can disable the feature by adding this to your `config.h`: +```c +#define NO_ACTION_ONESHOT +``` +The same with tapping keys (mod tap, layer tap, etc) +```c +#define NO_ACTION_TAPPING +``` +## Audio Settings + +If you're using the Audio feature, by default that includes the music mode feature. This tranlates matrix positions into notes. It's neat for sure, but most likely, you're not using it. You can disable it by adding this to your `config.h`: +```c +#define NO_MUSIC_MODE +``` +And by adding this to your `rules.mk` +```make +MUSIC_ENABLE = no +``` + +## Layers + +There are also some options for layers, that can reduce the firmware size. All of these settngs are for your `config.h`. + +You can limit the number of layers that the firmware uses -- if you're using less than 8 layers in total: +```c +#define LAYER_STATE_8BIT +``` +or if you require up to 16 layers instead: +```c +#define LAYER_STATE_16BIT +``` +Or if you're not using layers at all, you can outright remove the functionality altogether: +```c +#define NO_ACTION_LAYER +``` + + +## OLED tweaks + +One place you can save a bunch of space here is by not using `sprintf` or `snprintf`. This function call takes up ~1.5kB of firmware space, and can be rewritten. For instance, WPM uses this a lot. + +You can convert this: +```c + // OLD CODE + char wpm_str[4] = {0}; + sprintf(wpm_str, "WPM: %03d", get_current_wpm()); + oled_write(wpm_str, ' '), false); +``` +into this: +```c + // NEW CODE + oled_write_P(PSTR("WPM: "), false); + oled_write(get_u8_str(get_current_wpm(), ' '), false); +``` +which outputs `WPM: 5`. Or this: +```c + // NEW CODE + oled_write_P(PSTR("WPM: "), false); + oled_write(get_u8_str(get_current_wpm(), '0'), false); +``` +which outputs `WPM: 005`. + +## RGB Settings + +If you're using RGB on your board, both RGB Light (Underglow) and RGB Matrix (per key RGB) now require defines to enable different animations -- some keyboards enable a lot of animations by default, so you can generally gain back some space by disabling specific animations if you don't use them.. For RGB Light you can disable these in your keymap's `config.h`: +```c +#undef RGBLIGHT_ANIMATIONS +#undef RGBLIGHT_EFFECT_BREATHING +#undef RGBLIGHT_EFFECT_RAINBOW_MOOD +#undef RGBLIGHT_EFFECT_RAINBOW_SWIRL +#undef RGBLIGHT_EFFECT_SNAKE +#undef RGBLIGHT_EFFECT_KNIGHT +#undef RGBLIGHT_EFFECT_CHRISTMAS +#undef RGBLIGHT_EFFECT_STATIC_GRADIENT +#undef RGBLIGHT_EFFECT_RGB_TEST +#undef RGBLIGHT_EFFECT_ALTERNATING +#undef RGBLIGHT_EFFECT_TWINKLE +``` + +For RGB Matrix, these need to be explicitly enabled as well. To disable any that were enabled by the keyboard, add one or more of these to your keymap's `config.h`: +```c +#undef ENABLE_RGB_MATRIX_ALPHAS_MODS +#undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +#undef ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +#undef ENABLE_RGB_MATRIX_BREATHING +#undef ENABLE_RGB_MATRIX_BAND_SAT +#undef ENABLE_RGB_MATRIX_BAND_VAL +#undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +#undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +#undef ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +#undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +#undef ENABLE_RGB_MATRIX_CYCLE_ALL +#undef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +#undef ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +#undef ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +#undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN +#undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +#undef ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +#undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL +#undef ENABLE_RGB_MATRIX_DUAL_BEACON +#undef ENABLE_RGB_MATRIX_RAINBOW_BEACON +#undef ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +#undef ENABLE_RGB_MATRIX_RAINDROPS +#undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +#undef ENABLE_RGB_MATRIX_HUE_BREATHING +#undef ENABLE_RGB_MATRIX_HUE_PENDULUM +#undef ENABLE_RGB_MATRIX_HUE_WAVE +#undef ENABLE_RGB_MATRIX_PIXEL_FRACTAL +#undef ENABLE_RGB_MATRIX_PIXEL_RAIN + +#undef ENABLE_RGB_MATRIX_TYPING_HEATMAP +#undef ENABLE_RGB_MATRIX_DIGITAL_RAIN + +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +#undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +#undef ENABLE_RGB_MATRIX_SPLASH +#undef ENABLE_RGB_MATRIX_MULTISPLASH +#undef ENABLE_RGB_MATRIX_SOLID_SPLASH +#undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH +``` + +# Final Thoughts + +If you've done all of this, and your firmware is still too large, then it's time. It's time to consider making the switch to ARM. Unfortunately, right now is the worst possible time for that, due to the silicon shortage, and supply chain issues. Getting an ARM chip is difficult, at best, and significantly overpriced, at worst. + -- Drashna + +That said, there are a number of Pro Micro replacements with ARM controllers: +* [Proton C](https://qmk.fm/proton-c/) (out of stock) +* [Bonsai C](https://github.com/customMK/Bonsai-C) (Open Source, DIY/PCBA) +* [Raspberry Pi 2040](https://www.sparkfun.com/products/18288) (not currently supported, no ETA) + +There are other, non-Pro Micro compatible boards out there. The most popular being: +* [WeAct Blackpill F411](https://www.aliexpress.com/item/1005001456186625.html) (~$6 USD) diff --git a/docs/syllabus.md b/docs/syllabus.md index ccb382c5d4..f5cdea2182 100644 --- a/docs/syllabus.md +++ b/docs/syllabus.md @@ -31,6 +31,7 @@ These topics start to dig into some of the features that QMK supports. You don't * [RGB Lighting](feature_rgblight.md) * [RGB Matrix](feature_rgb_matrix.md) * [Tap-Hold Configuration](tap_hold.md) + * [Squeezing Space from AVR](squeezing_avr.md) * **Learn More About Keymaps** * [Keymaps](keymap.md) * [Custom Functions and Keycodes](custom_quantum_functions.md) From b6054c0206609f3755f71d819643644d250288b0 Mon Sep 17 00:00:00 2001 From: Stefan Kerkmann <karlk90@pm.me> Date: Mon, 22 Nov 2021 22:15:04 +0100 Subject: [PATCH 564/595] [Tests] Increase QMK test coverage (#13789) * Add per-test keymaps * Add better trace and info logs for failed unit-tests * Add layer state assertion with tracing message * Use individual test binaries configuration options * Add basic qmk functionality tests * Add tap hold configurations tests * Add auto shift tests * `qmk format-c * Fix tests Co-authored-by: Nick Brassel <nick@tzarc.org> --- Makefile | 7 +- build_full_test.mk | 23 +- build_test.mk | 19 +- quantum/quantum_keycodes.h | 34 -- testlist.mk | 4 +- tests/auto_shift/config.h | 19 + tests/auto_shift/test.mk | 20 + tests/auto_shift/test_auto_shift.cpp | 73 +++ tests/basic/config.h | 3 +- tests/basic/keymap.c | 45 -- tests/basic/test.mk | 18 + tests/basic/test_action_layer.cpp | 427 +++++++++++++++--- tests/basic/test_keypress.cpp | 185 +++++--- tests/basic/test_macro.cpp | 19 +- tests/basic/test_one_shot_keys.cpp | 197 ++++++++ tests/basic/test_tapping.cpp | 48 +- .../default_mod_tap/config.h | 21 + .../default_mod_tap/test.mk | 18 + .../default_mod_tap/test_tap_hold.cpp | 230 ++++++++++ .../ignore_mod_tap_interrupt/config.h | 21 + .../ignore_mod_tap_interrupt/test.mk | 18 + .../test_tap_hold.cpp | 136 ++++++ .../permissive_hold/config.h | 21 + .../permissive_hold/test.mk | 18 + .../permissive_hold/test_one_shot_keys.cpp | 76 ++++ .../permissive_hold/test_tap_hold.cpp | 132 ++++++ .../config.h | 22 + .../test.mk | 18 + .../test_tap_hold.cpp | 134 ++++++ .../retro_tapping/config.h | 21 + .../retro_tapping/test.mk | 18 + .../retro_tapping/test_tap_hold.cpp | 52 +++ .../retro_tapping/test_tapping.cpp | 112 +++++ .../tapping_force_hold/config.h | 21 + .../tapping_force_hold/test.mk | 18 + .../tapping_force_hold/test_action_layer.cpp | 81 ++++ .../tapping_force_hold/test_tap_hold.cpp | 215 +++++++++ .../{basic/rules.mk => test_common/build.mk} | 4 +- tests/test_common/keyboard_report_util.cpp | 21 +- tests/test_common/keymap.c | 33 ++ tests/test_common/test_common.h | 4 + tests/test_common/test_driver.cpp | 5 +- tests/test_common/test_driver.hpp | 29 +- tests/test_common/test_fixture.cpp | 142 +++++- tests/test_common/test_fixture.hpp | 21 +- tests/test_common/test_keymap_key.cpp | 30 ++ tests/test_common/test_keymap_key.hpp | 46 ++ tests/test_common/test_logger.cpp | 39 ++ tests/test_common/test_logger.hpp | 35 ++ 49 files changed, 2688 insertions(+), 265 deletions(-) create mode 100644 tests/auto_shift/config.h create mode 100644 tests/auto_shift/test.mk create mode 100644 tests/auto_shift/test_auto_shift.cpp delete mode 100644 tests/basic/keymap.c create mode 100644 tests/basic/test.mk create mode 100644 tests/basic/test_one_shot_keys.cpp create mode 100644 tests/tap_hold_configurations/default_mod_tap/config.h create mode 100644 tests/tap_hold_configurations/default_mod_tap/test.mk create mode 100644 tests/tap_hold_configurations/default_mod_tap/test_tap_hold.cpp create mode 100644 tests/tap_hold_configurations/ignore_mod_tap_interrupt/config.h create mode 100644 tests/tap_hold_configurations/ignore_mod_tap_interrupt/test.mk create mode 100644 tests/tap_hold_configurations/ignore_mod_tap_interrupt/test_tap_hold.cpp create mode 100644 tests/tap_hold_configurations/permissive_hold/config.h create mode 100644 tests/tap_hold_configurations/permissive_hold/test.mk create mode 100644 tests/tap_hold_configurations/permissive_hold/test_one_shot_keys.cpp create mode 100644 tests/tap_hold_configurations/permissive_hold/test_tap_hold.cpp create mode 100644 tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/config.h create mode 100644 tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/test.mk create mode 100644 tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/test_tap_hold.cpp create mode 100644 tests/tap_hold_configurations/retro_tapping/config.h create mode 100644 tests/tap_hold_configurations/retro_tapping/test.mk create mode 100644 tests/tap_hold_configurations/retro_tapping/test_tap_hold.cpp create mode 100644 tests/tap_hold_configurations/retro_tapping/test_tapping.cpp create mode 100644 tests/tap_hold_configurations/tapping_force_hold/config.h create mode 100644 tests/tap_hold_configurations/tapping_force_hold/test.mk create mode 100644 tests/tap_hold_configurations/tapping_force_hold/test_action_layer.cpp create mode 100644 tests/tap_hold_configurations/tapping_force_hold/test_tap_hold.cpp rename tests/{basic/rules.mk => test_common/build.mk} (92%) create mode 100644 tests/test_common/keymap.c create mode 100644 tests/test_common/test_common.h create mode 100644 tests/test_common/test_keymap_key.cpp create mode 100644 tests/test_common/test_keymap_key.hpp create mode 100644 tests/test_common/test_logger.cpp create mode 100644 tests/test_common/test_logger.hpp diff --git a/Makefile b/Makefile index c221cb89e0..88f430619e 100644 --- a/Makefile +++ b/Makefile @@ -378,11 +378,12 @@ define PARSE_ALL_KEYMAPS endef define BUILD_TEST - TEST_NAME := $1 + TEST_PATH := $1 + TEST_NAME := $$(notdir $$(TEST_PATH)) MAKE_TARGET := $2 COMMAND := $1 MAKE_CMD := $$(MAKE) -r -R -C $(ROOT_DIR) -f build_test.mk $$(MAKE_TARGET) - MAKE_VARS := TEST=$$(TEST_NAME) FULL_TESTS="$$(FULL_TESTS)" + MAKE_VARS := TEST=$$(TEST_NAME) TEST_PATH=$$(TEST_PATH) FULL_TESTS="$$(FULL_TESTS)" MAKE_MSG := $$(MSG_MAKE_TEST) $$(eval $$(call BUILD)) ifneq ($$(MAKE_TARGET),clean) @@ -406,7 +407,7 @@ define PARSE_TEST ifeq ($$(TEST_NAME),all) MATCHED_TESTS := $$(TEST_LIST) else - MATCHED_TESTS := $$(foreach TEST,$$(TEST_LIST),$$(if $$(findstring $$(TEST_NAME),$$(TEST)),$$(TEST),)) + MATCHED_TESTS := $$(foreach TEST, $$(TEST_LIST),$$(if $$(findstring $$(TEST_NAME), $$(notdir $$(TEST))), $$(TEST),)) endif $$(foreach TEST,$$(MATCHED_TESTS),$$(eval $$(call BUILD_TEST,$$(TEST),$$(TEST_TARGET)))) endef diff --git a/build_full_test.mk b/build_full_test.mk index f8030cb060..4cd1ac61b5 100644 --- a/build_full_test.mk +++ b/build_full_test.mk @@ -13,21 +13,24 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. -#include $(TMK_PATH)/protocol.mk +$(TEST)_INC := \ + tests\test_common\common_config.h -TEST_PATH=tests/$(TEST) - -$(TEST)_SRC= \ - $(TEST_PATH)/keymap.c \ +$(TEST)_SRC := \ $(TMK_COMMON_SRC) \ $(QUANTUM_SRC) \ $(SRC) \ + tests/test_common/keymap.c \ tests/test_common/matrix.c \ tests/test_common/test_driver.cpp \ tests/test_common/keyboard_report_util.cpp \ - tests/test_common/test_fixture.cpp -$(TEST)_SRC += $(patsubst $(ROOTDIR)/%,%,$(wildcard $(TEST_PATH)/*.cpp)) + tests/test_common/test_fixture.cpp \ + tests/test_common/test_keymap_key.cpp \ + tests/test_common/test_logger.cpp \ + $(patsubst $(ROOTDIR)/%,%,$(wildcard $(TEST_PATH)/*.cpp)) + +$(TEST)_DEFS := $(TMK_COMMON_DEFS) $(OPT_DEFS) + +$(TEST)_CONFIG := $(TEST_PATH)/config.h -$(TEST)_DEFS=$(TMK_COMMON_DEFS) $(OPT_DEFS) -$(TEST)_CONFIG=$(TEST_PATH)/config.h -VPATH+=$(TOP_DIR)/tests/test_common +VPATH += $(TOP_DIR)/tests/test_common \ No newline at end of file diff --git a/build_test.mk b/build_test.mk index 36cb7936ed..136a0455f0 100644 --- a/build_test.mk +++ b/build_test.mk @@ -16,14 +16,14 @@ TEST_OBJ = $(BUILD_DIR)/test_obj OUTPUTS := $(TEST_OBJ)/$(TEST) $(GTEST_OUTPUT) GTEST_INC := \ - $(LIB_PATH)/googletest/googletest/include\ - $(LIB_PATH)/googletest/googlemock/include\ + $(LIB_PATH)/googletest/googletest/include \ + $(LIB_PATH)/googletest/googlemock/include -GTEST_INTERNAL_INC :=\ - $(LIB_PATH)/googletest/googletest\ +GTEST_INTERNAL_INC := \ + $(LIB_PATH)/googletest/googletest \ $(LIB_PATH)/googletest/googlemock -$(GTEST_OUTPUT)_SRC :=\ +$(GTEST_OUTPUT)_SRC := \ googletest/src/gtest-all.cc\ googlemock/src/gmock-all.cc @@ -33,9 +33,9 @@ $(GTEST_OUTPUT)_INC := $(GTEST_INC) $(GTEST_INTERNAL_INC) LDFLAGS += -lstdc++ -lpthread -shared-libgcc CREATE_MAP := no -VPATH +=\ - $(LIB_PATH)/googletest\ - $(LIB_PATH)/googlemock\ +VPATH += \ + $(LIB_PATH)/googletest \ + $(LIB_PATH)/googlemock \ $(LIB_PATH)/printf all: elf @@ -49,7 +49,8 @@ CONSOLE_ENABLE = yes endif ifneq ($(filter $(FULL_TESTS),$(TEST)),) -include tests/$(TEST)/rules.mk +include tests/test_common/build.mk +include $(TEST_PATH)/test.mk endif include common_features.mk diff --git a/quantum/quantum_keycodes.h b/quantum/quantum_keycodes.h index d013a6a169..cde97074d3 100644 --- a/quantum/quantum_keycodes.h +++ b/quantum/quantum_keycodes.h @@ -558,40 +558,6 @@ enum quantum_keycodes { PROGRAMMABLE_BUTTON_31, PROGRAMMABLE_BUTTON_32, - // Dedicated macro keys for Configurator and VIA - MACRO_0, - MACRO_1, - MACRO_2, - MACRO_3, - MACRO_4, - MACRO_5, - MACRO_6, - MACRO_7, - MACRO_8, - MACRO_9, - MACRO_10, - MACRO_11, - MACRO_12, - MACRO_13, - MACRO_14, - MACRO_15, - MACRO_16, - MACRO_17, - MACRO_18, - MACRO_19, - MACRO_20, - MACRO_21, - MACRO_22, - MACRO_23, - MACRO_24, - MACRO_25, - MACRO_26, - MACRO_27, - MACRO_28, - MACRO_29, - MACRO_30, - MACRO_31, - // Start of custom keycode range for keyboards and keymaps - always leave at the end SAFE_RANGE }; diff --git a/testlist.mk b/testlist.mk index cff784dad6..d2bb571be6 100644 --- a/testlist.mk +++ b/testlist.mk @@ -1,5 +1,5 @@ -TEST_LIST = $(notdir $(patsubst %/rules.mk,%,$(wildcard $(ROOT_DIR)/tests/*/rules.mk))) -FULL_TESTS := $(TEST_LIST) +TEST_LIST = $(sort $(patsubst %/test.mk,%, $(shell find $(ROOT_DIR)tests -type f -name test.mk))) +FULL_TESTS := $(notdir $(TEST_LIST)) include $(QUANTUM_PATH)/debounce/tests/testlist.mk include $(QUANTUM_PATH)/encoder/tests/testlist.mk diff --git a/tests/auto_shift/config.h b/tests/auto_shift/config.h new file mode 100644 index 0000000000..4f343b4529 --- /dev/null +++ b/tests/auto_shift/config.h @@ -0,0 +1,19 @@ +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "test_common.h" \ No newline at end of file diff --git a/tests/auto_shift/test.mk b/tests/auto_shift/test.mk new file mode 100644 index 0000000000..4259c606e4 --- /dev/null +++ b/tests/auto_shift/test.mk @@ -0,0 +1,20 @@ +# Copyright 2021 Stefan Kerkmann +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# -------------------------------------------------------------------------------- +# Keep this file, even if it is empty, as a marker that this folder contains tests +# -------------------------------------------------------------------------------- + +AUTO_SHIFT_ENABLE = yes \ No newline at end of file diff --git a/tests/auto_shift/test_auto_shift.cpp b/tests/auto_shift/test_auto_shift.cpp new file mode 100644 index 0000000000..9c5ed9a832 --- /dev/null +++ b/tests/auto_shift/test_auto_shift.cpp @@ -0,0 +1,73 @@ +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "keyboard_report_util.hpp" +#include "keycode.h" +#include "test_common.hpp" +#include "action_tapping.h" +#include "test_fixture.hpp" +#include "test_keymap_key.hpp" + +using testing::_; +using testing::InSequence; + +class AutoShift : public TestFixture {}; + +TEST_F(AutoShift, key_release_before_timeout) { + TestDriver driver; + InSequence s; + auto regular_key = KeymapKey(0, 2, 0, KC_A); + + set_keymap({regular_key}); + + /* Press regular key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + regular_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release regular key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_A))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + regular_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(AutoShift, key_release_after_timeout) { + TestDriver driver; + InSequence s; + auto regular_key = KeymapKey(0, 2, 0, KC_A); + + set_keymap({regular_key}); + + /* Press regular key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + regular_key.press(); + idle_for(AUTO_SHIFT_TIMEOUT); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release regular key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_A))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + regular_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} \ No newline at end of file diff --git a/tests/basic/config.h b/tests/basic/config.h index 99bd62d991..85fa9d691d 100644 --- a/tests/basic/config.h +++ b/tests/basic/config.h @@ -16,5 +16,4 @@ #pragma once -#define MATRIX_ROWS 4 -#define MATRIX_COLS 10 +#include "test_common.h" \ No newline at end of file diff --git a/tests/basic/keymap.c b/tests/basic/keymap.c deleted file mode 100644 index 2b5747abb7..0000000000 --- a/tests/basic/keymap.c +++ /dev/null @@ -1,45 +0,0 @@ -/* Copyright 2017 Fred Sundvik - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "quantum.h" - -// Don't rearrange keys as existing tests might rely on the order -// Col2, Row 0 has to be KC_NO, because tests rely on it - -#define COMBO1 RSFT(LCTL(KC_O)) - -const uint16_t PROGMEM - keymaps[][MATRIX_ROWS][MATRIX_COLS] = - { - [0] = - { - // 0 1 2 3 4 5 6 7 8 9 - {KC_A, KC_B, KC_NO, KC_LSFT, KC_RSFT, KC_LCTL, COMBO1, SFT_T(KC_P), M(0), KC_NO}, - {KC_EQL, KC_PLUS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO}, - {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO}, - {KC_C, KC_D, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO}, - }, -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - if (record->event.pressed) { - switch (id) { - case 0: - return MACRO(D(LSFT), T(H), U(LSFT), T(E), T(L), T(L), T(O), T(SPACE), W(100), D(LSFT), T(W), U(LSFT), I(10), T(O), T(R), T(L), T(D), D(LSFT), T(1), U(LSFT), END); - } - } - return MACRO_NONE; -}; diff --git a/tests/basic/test.mk b/tests/basic/test.mk new file mode 100644 index 0000000000..29690d1adf --- /dev/null +++ b/tests/basic/test.mk @@ -0,0 +1,18 @@ +# Copyright 2017 Fred Sundvik +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# -------------------------------------------------------------------------------- +# Keep this file, even if it is empty, as a marker that this folder contains tests +# -------------------------------------------------------------------------------- \ No newline at end of file diff --git a/tests/basic/test_action_layer.cpp b/tests/basic/test_action_layer.cpp index d00a0859b9..1b12d13642 100644 --- a/tests/basic/test_action_layer.cpp +++ b/tests/basic/test_action_layer.cpp @@ -14,39 +14,54 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ +#include "gtest/gtest.h" +#include "keyboard_report_util.hpp" #include "test_common.hpp" using testing::_; -using testing::Return; +using testing::InSequence; class ActionLayer : public TestFixture {}; -// TEST_F(ActionLayer, LayerStateDBG) { -// layer_state_set(0); -// } - -// TEST_F(ActionLayer, LayerStateSet) { -// layer_state_set(0); -// EXPECT_EQ(layer_state, 0); -// layer_state_set(0b001100); -// EXPECT_EQ(layer_state, 0b001100); -// } - -// TEST_F(ActionLayer, LayerStateIs) { -// layer_state_set(0); -// EXPECT_EQ(layer_state_is(0), true); -// EXPECT_EQ(layer_state_is(1), true); -// layer_state_set(1); -// EXPECT_EQ(layer_state_is(0), true); -// EXPECT_EQ(layer_state_is(1), true); -// layer_state_set(2); -// EXPECT_EQ(layer_state_is(0), false); -// EXPECT_EQ(layer_state_is(1), false); -// EXPECT_EQ(layer_state_is(2), true); -// } +TEST_F(ActionLayer, LayerStateDBG) { + TestDriver driver; + + layer_state_set(0); + + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(ActionLayer, LayerStateSet) { + TestDriver driver; + + layer_state_set(0); + EXPECT_EQ(layer_state, 0); + layer_state_set(0b001100); + EXPECT_EQ(layer_state, 0b001100); + + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(ActionLayer, LayerStateIs) { + TestDriver driver; + + layer_state_set(0); + EXPECT_EQ(layer_state_is(0), true); + EXPECT_EQ(layer_state_is(1), false); + layer_state_set(1); + EXPECT_EQ(layer_state_is(0), true); + EXPECT_EQ(layer_state_is(1), false); + layer_state_set(2); + EXPECT_EQ(layer_state_is(0), false); + EXPECT_EQ(layer_state_is(1), true); + EXPECT_EQ(layer_state_is(2), false); + + testing::Mock::VerifyAndClearExpectations(&driver); +} TEST_F(ActionLayer, LayerStateCmp) { - uint32_t prev_layer; + TestDriver driver; + uint32_t prev_layer; prev_layer = 0; EXPECT_EQ(layer_state_cmp(prev_layer, 0), true); @@ -60,33 +75,339 @@ TEST_F(ActionLayer, LayerStateCmp) { EXPECT_EQ(layer_state_cmp(prev_layer, 0), false); EXPECT_EQ(layer_state_cmp(prev_layer, 1), true); EXPECT_EQ(layer_state_cmp(prev_layer, 2), false); + + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(ActionLayer, LayerClear) { + TestDriver driver; + + layer_clear(); + EXPECT_EQ(layer_state, 0); + + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(ActionLayer, LayerMove) { + TestDriver driver; + + layer_move(0); + EXPECT_EQ(layer_state, 1); + layer_move(3); + EXPECT_EQ(layer_state, 0b1000); + + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(ActionLayer, LayerOn) { + TestDriver driver; + + layer_clear(); + layer_on(1); + layer_on(3); + layer_on(3); + EXPECT_EQ(layer_state, 0b1010); + + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(ActionLayer, LayerOff) { + TestDriver driver; + + layer_clear(); + layer_on(1); + layer_on(3); + layer_off(3); + layer_off(2); + EXPECT_EQ(layer_state, 0b0010); + + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(ActionLayer, MomentaryLayerDoesNothing) { + TestDriver driver; + KeymapKey layer_key = KeymapKey{0, 0, 0, MO(1)}; + + set_keymap({layer_key}); + + /* Press and release MO, nothing should happen. */ + /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + layer_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + layer_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(ActionLayer, MomentaryLayerWithKeypress) { + TestDriver driver; + KeymapKey layer_key = KeymapKey{0, 0, 0, MO(1)}; + + /* These keys must have the same position in the matrix, only the layer is different. */ + KeymapKey regular_key = KeymapKey{0, 1, 0, KC_A}; + set_keymap({layer_key, regular_key, KeymapKey{1, 1, 0, KC_B}}); + + /* Press MO. */ + /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + layer_key.press(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(1)); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press key on layer 1 */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_B))).Times(1); + regular_key.press(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(1)); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release key on layer 1 */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + regular_key.release(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(1)); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release MO */ + /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + layer_key.release(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(0)); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(ActionLayer, ToggleLayerDoesNothing) { + GTEST_SKIP() << "TODO: Toggle layer does not activate the expected layer on key press but on release."; + + TestDriver driver; + KeymapKey layer_key = KeymapKey{0, 0, 0, TG(1)}; + + set_keymap({layer_key}); + + /* Press TG. Layer state should not change as it's applied on release. */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + layer_key.press(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(1)); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release TG. */ + /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + layer_key.release(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(1)); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(ActionLayer, ToggleLayerUpAndDown) { + GTEST_SKIP() << "TODO: Toggle layer does not activate the expected layer on key press but on release."; + + TestDriver driver; + KeymapKey toggle_layer_1_on_layer_0 = KeymapKey{0, 0, 0, TG(1)}; + KeymapKey toggle_layer_0_on_layer_1 = KeymapKey{1, 1, 0, TG(0)}; + + set_keymap({toggle_layer_1_on_layer_0, toggle_layer_0_on_layer_1}); + + /* Toggle Layer 1. */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + toggle_layer_1_on_layer_0.press(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(1)); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + toggle_layer_1_on_layer_0.release(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(1)); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Toggle Layer 0. */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + toggle_layer_0_on_layer_1.press(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(0)); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + toggle_layer_0_on_layer_1.release(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(0)); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(ActionLayer, LayerTapToggleDoesNothing) { + GTEST_SKIP() << "TODO: Tap toggle layer does not activate the expected layer on key press."; + + TestDriver driver; + KeymapKey layer_key = KeymapKey{0, 0, 0, TT(1)}; + + set_keymap({layer_key}); + + /* Press and release TT. */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(0); + layer_key.press(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(1)); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(2); + layer_key.release(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(0)); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(ActionLayer, LayerTapToggleWithKeypress) { + GTEST_SKIP() << "TODO: Tap toggle layer does not activate the expected layer on key press."; + + TestDriver driver; + KeymapKey layer_key = KeymapKey{0, 0, 0, TT(1)}; + + /* These keys must have the same position in the matrix, only the layer is different. */ + KeymapKey regular_key = KeymapKey{0, 1, 0, KC_A}; + set_keymap({layer_key, regular_key, KeymapKey{1, 1, 0, KC_B}}); + + /* Press TT. */ + /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(0); + layer_key.press(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(1)); + testing::Mock::VerifyAndClearExpectations(&driver); + + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_B))).Times(1); + regular_key.press(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(1)); + testing::Mock::VerifyAndClearExpectations(&driver); + + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + regular_key.release(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(1)); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + layer_key.release(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(0)); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(ActionLayer, LayerTapToggleWithToggleWithKeypress) { + GTEST_SKIP() << "TODO: Tap toggle layer does not activate the expected layer on key press."; + + TestDriver driver; + KeymapKey layer_key = KeymapKey{0, 0, 0, TT(1)}; + + /* These keys must have the same position in the matrix, only the layer is different. */ + KeymapKey regular_key = KeymapKey{0, 1, 0, KC_A}; + set_keymap({layer_key, regular_key, KeymapKey{1, 1, 0, KC_B}}); + + /* Tap TT five times . */ + /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(9); + + layer_key.press(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(1)); + layer_key.release(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(0)); + + layer_key.press(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(1)); + layer_key.release(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(0)); + + layer_key.press(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(1)); + layer_key.release(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(0)); + + layer_key.press(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(1)); + layer_key.release(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(0)); + + layer_key.press(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(1)); + layer_key.release(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(1)); + + testing::Mock::VerifyAndClearExpectations(&driver); + + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_B))).Times(1); + regular_key.press(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(1)); + testing::Mock::VerifyAndClearExpectations(&driver); + + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + regular_key.release(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(1)); + testing::Mock::VerifyAndClearExpectations(&driver); } -// TEST_F(ActionLayer, LayerClear) { -// layer_clear(); -// EXPECT_EQ(layer_state, 0); -// } - -// TEST_F(ActionLayer, LayerMove) { -// layer_move(0); -// EXPECT_EQ(layer_state, 1); -// layer_move(3); -// EXPECT_EQ(layer_state, 0b1000); -// } - -// TEST_F(ActionLayer, LayerOn) { -// layer_clear(); -// layer_on(1); -// layer_on(3); -// layer_on(3); -// EXPECT_EQ(layer_state, 0b1010); -// } - -// TEST_F(ActionLayer, LayerOff) { -// layer_clear(); -// layer_on(1); -// layer_on(3); -// layer_off(3); -// layer_off(2); -// EXPECT_EQ(layer_state, 0b1000); -// } +TEST_F(ActionLayer, LayerTapReleasedBeforeKeypressReleaseWithModifiers) { + GTEST_SKIP() << "TODO: Modifiers are erroneously discarded on layer changes, although a key that introduced the modifier is still held."; + TestDriver driver; + InSequence s; + + KeymapKey layer_0_key_0 = KeymapKey{0, 0, 0, LT(1, KC_T)}; + KeymapKey layer_1_key_1 = KeymapKey{1, 1, 0, RALT(KC_9)}; + + set_keymap({layer_0_key_0, layer_1_key_1}); + + /* Press layer tap and wait for tapping term to switch to layer 1 */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(0); + layer_0_key_0.press(); + idle_for(TAPPING_TERM); + EXPECT_TRUE(layer_state_is(0)); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press key with layer 1 mapping, result basically expected + * altough more reports are send then necessary. */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RALT))).Times(1); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RALT, KC_9))).Times(1); + layer_1_key_1.press(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(1)); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release layer tap key, no report is send because key is still held. */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + layer_0_key_0.release(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(0)); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Unregister keycode and modifier. */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RALT))).Times(1); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + layer_1_key_1.release(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(0)); + testing::Mock::VerifyAndClearExpectations(&driver); +} diff --git a/tests/basic/test_keypress.cpp b/tests/basic/test_keypress.cpp index cf839f8c16..70613bbd6d 100644 --- a/tests/basic/test_keypress.cpp +++ b/tests/basic/test_keypress.cpp @@ -14,11 +14,11 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ +#include "keycode.h" #include "test_common.hpp" using testing::_; using testing::InSequence; -using testing::Return; class KeyPress : public TestFixture {}; @@ -30,95 +30,156 @@ TEST_F(KeyPress, SendKeyboardIsNotCalledWhenNoKeyIsPressed) { TEST_F(KeyPress, CorrectKeyIsReportedWhenPressed) { TestDriver driver; - press_key(0, 0); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_A))); + auto key = KeymapKey(0, 0, 0, KC_A); + + set_keymap({key}); + + key.press(); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(key.report_code))); keyboard_task(); - release_key(0, 0); + + key.release(); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); keyboard_task(); } +TEST_F(KeyPress, ANonMappedKeyDoesNothing) { + TestDriver driver; + auto key = KeymapKey(0, 0, 0, KC_NO); + + set_keymap({key}); + + key.press(); + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + keyboard_task(); + keyboard_task(); +} + TEST_F(KeyPress, CorrectKeysAreReportedWhenTwoKeysArePressed) { TestDriver driver; - press_key(1, 0); - press_key(0, 3); + auto key_b = KeymapKey(0, 0, 0, KC_B); + auto key_c = KeymapKey(0, 1, 1, KC_C); + + set_keymap({key_b, key_c}); + + key_b.press(); + key_c.press(); // Note that QMK only processes one key at a time // See issue #1476 for more information - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_B))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(key_b.report_code))); keyboard_task(); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_B, KC_C))); + + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(key_b.report_code, key_c.report_code))); keyboard_task(); - release_key(1, 0); - release_key(0, 3); + + key_b.release(); + key_c.release(); // Note that the first key released is the first one in the matrix order - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_C))); - keyboard_task(); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(key_c.report_code))); keyboard_task(); -} -TEST_F(KeyPress, ANonMappedKeyDoesNothing) { - TestDriver driver; - press_key(2, 0); - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - keyboard_task(); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); keyboard_task(); } TEST_F(KeyPress, LeftShiftIsReportedCorrectly) { TestDriver driver; - press_key(3, 0); - press_key(0, 0); + auto key_a = KeymapKey(0, 0, 0, KC_A); + auto key_lsft = KeymapKey(0, 3, 0, KC_LEFT_SHIFT); + + set_keymap({key_a, key_lsft}); + + key_lsft.press(); + key_a.press(); + // Unfortunately modifiers are also processed in the wrong order // See issue #1476 for more information - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_A))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(key_a.report_code))); keyboard_task(); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_A, KC_LEFT_SHIFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(key_a.report_code, key_lsft.report_code))); keyboard_task(); - release_key(0, 0); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); + + key_a.release(); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(key_lsft.report_code))); keyboard_task(); - release_key(3, 0); + + key_lsft.release(); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); keyboard_task(); } TEST_F(KeyPress, PressLeftShiftAndControl) { TestDriver driver; - press_key(3, 0); - press_key(5, 0); + auto key_lsft = KeymapKey(0, 3, 0, KC_LEFT_SHIFT); + auto key_lctrl = KeymapKey(0, 5, 0, KC_LEFT_CTRL); + + set_keymap({key_lctrl, key_lsft}); + + key_lsft.press(); + key_lctrl.press(); + // Unfortunately modifiers are also processed in the wrong order // See issue #1476 for more information - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(key_lsft.report_code))); keyboard_task(); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT, KC_LEFT_CTRL))); + + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(key_lsft.report_code, key_lctrl.report_code))); + keyboard_task(); + + key_lsft.release(); + key_lctrl.release(); + + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(key_lctrl.report_code))); + keyboard_task(); + + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); keyboard_task(); } TEST_F(KeyPress, LeftAndRightShiftCanBePressedAtTheSameTime) { TestDriver driver; - press_key(3, 0); - press_key(4, 0); + auto key_lsft = KeymapKey(0, 3, 0, KC_LEFT_SHIFT); + auto key_rsft = KeymapKey(0, 4, 0, KC_RIGHT_SHIFT); + + set_keymap({key_rsft, key_lsft}); + + key_lsft.press(); + key_rsft.press(); // Unfortunately modifiers are also processed in the wrong order // See issue #1476 for more information - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(key_lsft.report_code))); + keyboard_task(); + + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(key_lsft.report_code, key_rsft.report_code))); + keyboard_task(); + + key_lsft.release(); + key_rsft.release(); + + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(key_rsft.report_code))); keyboard_task(); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT, KC_RIGHT_SHIFT))); + + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); keyboard_task(); } TEST_F(KeyPress, RightShiftLeftControlAndCharWithTheSameKey) { TestDriver driver; - press_key(6, 0); + auto combo_key = KeymapKey(0, 0, 0, RSFT(LCTL(KC_O))); + + set_keymap({combo_key}); + // BUG: The press is split into two reports // BUG: It reports RSFT instead of LSFT // See issue #524 for more information // The underlying cause is that we use only one bit to represent the right hand // modifiers. + combo_key.press(); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RIGHT_SHIFT, KC_RIGHT_CTRL))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RIGHT_SHIFT, KC_RIGHT_CTRL, KC_O))); keyboard_task(); - release_key(6, 0); + + combo_key.release(); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RIGHT_SHIFT, KC_RIGHT_CTRL))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); keyboard_task(); @@ -127,25 +188,29 @@ TEST_F(KeyPress, RightShiftLeftControlAndCharWithTheSameKey) { TEST_F(KeyPress, PressPlusEqualReleaseBeforePress) { TestDriver driver; InSequence s; + auto key_plus = KeymapKey(0, 1, 1, KC_PLUS); + auto key_eql = KeymapKey(0, 0, 1, KC_EQL); + + set_keymap({key_plus, key_eql}); - press_key(1, 1); // KC_PLUS + key_plus.press(); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT, KC_EQUAL))); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - release_key(1, 1); // KC_PLUS + key_plus.release(); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - press_key(0, 1); // KC_EQUAL - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_EQUAL))); + key_eql.press(); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(key_eql.report_code))); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - release_key(0, 1); // KC_EQUAL + key_eql.release(); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); @@ -154,27 +219,31 @@ TEST_F(KeyPress, PressPlusEqualReleaseBeforePress) { TEST_F(KeyPress, PressPlusEqualDontReleaseBeforePress) { TestDriver driver; InSequence s; + auto key_plus = KeymapKey(0, 1, 1, KC_PLUS); + auto key_eql = KeymapKey(0, 0, 1, KC_EQUAL); + + set_keymap({key_plus, key_eql}); - press_key(1, 1); // KC_PLUS + key_plus.press(); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT, KC_EQUAL))); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - press_key(0, 1); // KC_EQUAL + key_eql.press(); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_EQUAL))); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - release_key(1, 1); // KC_PLUS + key_plus.release(); // BUG: Should really still return KC_EQUAL, but this is fine too // It's also called twice for some reason EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(2); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - release_key(0, 1); // KC_EQUAL + key_eql.release(); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); @@ -183,24 +252,28 @@ TEST_F(KeyPress, PressPlusEqualDontReleaseBeforePress) { TEST_F(KeyPress, PressEqualPlusReleaseBeforePress) { TestDriver driver; InSequence s; + auto key_plus = KeymapKey(0, 1, 1, KC_PLUS); + auto key_eql = KeymapKey(0, 0, 1, KC_EQUAL); - press_key(0, 1); // KC_EQUAL + set_keymap({key_plus, key_eql}); + + key_eql.press(); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_EQUAL))); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - release_key(0, 1); // KC_EQUAL + key_eql.release(); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - press_key(1, 1); // KC_PLUS + key_plus.press(); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT, KC_EQUAL))); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - release_key(1, 1); // KC_PLUS + key_plus.release(); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); run_one_scan_loop(); @@ -210,13 +283,17 @@ TEST_F(KeyPress, PressEqualPlusReleaseBeforePress) { TEST_F(KeyPress, PressEqualPlusDontReleaseBeforePress) { TestDriver driver; InSequence s; + auto key_plus = KeymapKey(0, 1, 1, KC_PLUS); + auto key_eql = KeymapKey(0, 0, 1, KC_EQL); + + set_keymap({key_plus, key_eql}); - press_key(0, 1); // KC_EQUAL + key_eql.press(); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_EQUAL))); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - press_key(1, 1); // KC_PLUS + key_plus.press(); // BUG: The sequence is a bit strange, but it works, the end result is that // KC_PLUS is sent EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT, KC_EQUAL))); @@ -225,16 +302,16 @@ TEST_F(KeyPress, PressEqualPlusDontReleaseBeforePress) { run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - release_key(0, 1); // KC_EQUAL + key_eql.release(); // I guess it's fine to still report shift here EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - release_key(1, 1); // KC_PLUS + key_plus.release(); // This report is not needed EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); -} +} \ No newline at end of file diff --git a/tests/basic/test_macro.cpp b/tests/basic/test_macro.cpp index 1ac6f473fc..ae2f3b32e3 100644 --- a/tests/basic/test_macro.cpp +++ b/tests/basic/test_macro.cpp @@ -24,10 +24,25 @@ class Macro : public TestFixture {}; #define AT_TIME(t) WillOnce(InvokeWithoutArgs([current_time]() { EXPECT_EQ(timer_elapsed32(current_time), t); })) +extern "C" const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + if (record->event.pressed) { + switch (id) { + case 0: + return MACRO(D(LSFT), T(H), U(LSFT), T(E), T(L), T(L), T(O), T(SPACE), W(100), D(LSFT), T(W), U(LSFT), I(10), T(O), T(R), T(L), T(D), D(LSFT), T(1), U(LSFT), END); + } + } + return MACRO_NONE; +}; + TEST_F(Macro, PlayASimpleMacro) { TestDriver driver; InSequence s; - press_key(8, 0); + auto key_macro = KeymapKey(0, 8, 0, M(0)); + + set_keymap({key_macro}); + + key_macro.press(); + uint32_t current_time = timer_read32(); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))).AT_TIME(0); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT, KC_H))).AT_TIME(0); @@ -68,4 +83,6 @@ TEST_F(Macro, PlayASimpleMacro) { EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))).AT_TIME(210); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).AT_TIME(220); run_one_scan_loop(); + + key_macro.release(); } diff --git a/tests/basic/test_one_shot_keys.cpp b/tests/basic/test_one_shot_keys.cpp new file mode 100644 index 0000000000..98178912e4 --- /dev/null +++ b/tests/basic/test_one_shot_keys.cpp @@ -0,0 +1,197 @@ +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "action_util.h" +#include "keyboard_report_util.hpp" +#include "test_common.hpp" + +using testing::_; +using testing::InSequence; + +class OneShot : public TestFixture {}; +class OneShotParametrizedTestFixture : public ::testing::WithParamInterface<std::pair<KeymapKey, KeymapKey>>, public OneShot {}; + +TEST_F(OneShot, OSMWithoutAdditionalKeypressDoesNothing) { + TestDriver driver; + auto osm_key = KeymapKey(0, 0, 0, OSM(MOD_LSFT), KC_LSFT); + + set_keymap({osm_key}); + + /* Press and release OSM key*/ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + osm_key.press(); + run_one_scan_loop(); + osm_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* OSM are added when an actual report is send */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(osm_key.report_code))); + send_keyboard_report(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Make unit-test pass */ + clear_oneshot_mods(); +} + +#if defined(ONESHOT_TIMEOUT) + +TEST_P(OneShotParametrizedTestFixture, OSMExpiredDoesNothing) { + TestDriver driver; + KeymapKey osm_key = GetParam().first; + KeymapKey regular_key = GetParam().second; + + set_keymap({osm_key, regular_key}); + + /* Press and release OSM */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + osm_key.press(); + run_one_scan_loop(); + osm_key.release(); + idle_for(ONESHOT_TIMEOUT); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press regular key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(regular_key.report_code))).Times(1); + regular_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release regular key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + regular_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +#endif + +TEST_P(OneShotParametrizedTestFixture, OSMWithAdditionalKeypress) { + TestDriver driver; + KeymapKey osm_key = GetParam().first; + KeymapKey regular_key = GetParam().second; + + set_keymap({osm_key, regular_key}); + + /* Press and release OSM */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + osm_key.press(); + run_one_scan_loop(); + osm_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press regular key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(osm_key.report_code, regular_key.report_code))).Times(1); + regular_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release regular key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + regular_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_P(OneShotParametrizedTestFixture, OSMAsRegularModifierWithAdditionalKeypress) { + TestDriver driver; + testing::InSequence s; + + KeymapKey osm_key = GetParam().first; + KeymapKey regular_key = GetParam().second; + + set_keymap({osm_key, regular_key}); + + /* Press OSM */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + osm_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press regular key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + regular_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release regular key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + regular_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release OSM */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(regular_key.report_code, osm_key.report_code))).Times(1); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + osm_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +// clang-format off + +INSTANTIATE_TEST_CASE_P( + OneShotModifierTests, + OneShotParametrizedTestFixture, + ::testing::Values( + /* first is osm key, second is regular key. */ + std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_LSFT), KC_LSFT}, KeymapKey{0, 1, 1, KC_A}), + std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_LCTL), KC_LCTL}, KeymapKey{0, 1, 1, KC_A}), + std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_LALT), KC_LALT}, KeymapKey{0, 1, 1, KC_A}), + std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_LGUI), KC_LGUI}, KeymapKey{0, 1, 1, KC_A}), + std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_RCTL), KC_RCTL}, KeymapKey{0, 1, 1, KC_A}), + std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_RSFT), KC_RSFT}, KeymapKey{0, 1, 1, KC_A}), + std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_RALT), KC_RALT}, KeymapKey{0, 1, 1, KC_A}), + std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_RGUI), KC_RGUI}, KeymapKey{0, 1, 1, KC_A}) + )); +// clang-format on + +TEST_F(OneShot, OSLWithAdditionalKeypress) { + TestDriver driver; + InSequence s; + KeymapKey osl_key = KeymapKey{0, 0, 0, OSL(1)}; + KeymapKey regular_key = KeymapKey{1, 1, 0, KC_A}; + + set_keymap({osl_key, regular_key}); + + /* Press OSL key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + osl_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release OSL key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(2); + osl_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press regular key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(regular_key.report_code))).Times(2); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + regular_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release regular key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + regular_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} diff --git a/tests/basic/test_tapping.cpp b/tests/basic/test_tapping.cpp index 88ab97eb6e..181b7ca89e 100644 --- a/tests/basic/test_tapping.cpp +++ b/tests/basic/test_tapping.cpp @@ -14,8 +14,11 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ +#include "keyboard_report_util.hpp" +#include "keycode.h" #include "test_common.hpp" #include "action_tapping.h" +#include "test_keymap_key.hpp" using testing::_; using testing::InSequence; @@ -25,14 +28,19 @@ class Tapping : public TestFixture {}; TEST_F(Tapping, TapA_SHFT_T_KeyReportsKey) { TestDriver driver; InSequence s; + auto key_shift_hold_p_tap = KeymapKey(0, 7, 0, SFT_T(KC_P)); + + set_keymap({key_shift_hold_p_tap}); - press_key(7, 0); // Tapping keys does nothing on press + key_shift_hold_p_tap.press(); EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); run_one_scan_loop(); - release_key(7, 0); + // First we get the key press + key_shift_hold_p_tap.release(); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + // Then the release EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); run_one_scan_loop(); @@ -41,25 +49,38 @@ TEST_F(Tapping, TapA_SHFT_T_KeyReportsKey) { TEST_F(Tapping, HoldA_SHFT_T_KeyReportsShift) { TestDriver driver; InSequence s; + auto mod_tap_hold_key = KeymapKey(0, 7, 0, SFT_T(KC_P)); + + set_keymap({mod_tap_hold_key}); + + mod_tap_hold_key.press(); - press_key(7, 0); // Tapping keys does nothing on press EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); idle_for(TAPPING_TERM); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); run_one_scan_loop(); + + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + mod_tap_hold_key.release(); + run_one_scan_loop(); } TEST_F(Tapping, ANewTapWithinTappingTermIsBuggy) { // See issue #1478 for more information TestDriver driver; InSequence s; + auto key_shift_hold_p_tap = KeymapKey(0, 7, 0, SFT_T(KC_P)); + + set_keymap({key_shift_hold_p_tap}); - press_key(7, 0); // Tapping keys does nothing on press + key_shift_hold_p_tap.press(); EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); run_one_scan_loop(); - release_key(7, 0); + key_shift_hold_p_tap.release(); + // First we get the key press EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); // Then the release @@ -67,19 +88,20 @@ TEST_F(Tapping, ANewTapWithinTappingTermIsBuggy) { run_one_scan_loop(); // This sends KC_P, even if it should do nothing - press_key(7, 0); + key_shift_hold_p_tap.press(); // This test should not succed if everything works correctly EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); run_one_scan_loop(); - release_key(7, 0); + + key_shift_hold_p_tap.release(); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); idle_for(TAPPING_TERM + 1); // On the other hand, nothing is sent if we are outside the tapping term - press_key(7, 0); + key_shift_hold_p_tap.press(); EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); run_one_scan_loop(); - release_key(7, 0); + key_shift_hold_p_tap.release(); // First we get the key press EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); @@ -90,8 +112,12 @@ TEST_F(Tapping, ANewTapWithinTappingTermIsBuggy) { // Now we are geting into strange territory, as the hold registers too early here // But the stranges part is: // If TAPPING_TERM + 1 above is changed to TAPPING_TERM or TAPPING_TERM + 2 it doesn't - press_key(7, 0); + key_shift_hold_p_tap.press(); // Shouldn't be called here really EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))).Times(1); idle_for(TAPPING_TERM); -} + + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + key_shift_hold_p_tap.release(); + run_one_scan_loop(); +} \ No newline at end of file diff --git a/tests/tap_hold_configurations/default_mod_tap/config.h b/tests/tap_hold_configurations/default_mod_tap/config.h new file mode 100644 index 0000000000..5955b8600a --- /dev/null +++ b/tests/tap_hold_configurations/default_mod_tap/config.h @@ -0,0 +1,21 @@ +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "test_common.h" + +#define IGNORE_MOD_TAP_INTERRUPT \ No newline at end of file diff --git a/tests/tap_hold_configurations/default_mod_tap/test.mk b/tests/tap_hold_configurations/default_mod_tap/test.mk new file mode 100644 index 0000000000..cfab996e0e --- /dev/null +++ b/tests/tap_hold_configurations/default_mod_tap/test.mk @@ -0,0 +1,18 @@ +# Copyright 2021 Stefan Kerkmann +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# -------------------------------------------------------------------------------- +# Keep this file, even if it is empty, as a marker that this folder contains tests +# -------------------------------------------------------------------------------- \ No newline at end of file diff --git a/tests/tap_hold_configurations/default_mod_tap/test_tap_hold.cpp b/tests/tap_hold_configurations/default_mod_tap/test_tap_hold.cpp new file mode 100644 index 0000000000..90befcdffd --- /dev/null +++ b/tests/tap_hold_configurations/default_mod_tap/test_tap_hold.cpp @@ -0,0 +1,230 @@ +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "keyboard_report_util.hpp" +#include "keycode.h" +#include "test_common.hpp" +#include "action_tapping.h" +#include "test_fixture.hpp" +#include "test_keymap_key.hpp" + +using testing::_; +using testing::InSequence; + +class DefaultTapHold : public TestFixture {}; + +TEST_F(DefaultTapHold, tap_regular_key_while_mod_tap_key_is_held) { + TestDriver driver; + InSequence s; + auto mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); + auto regular_key = KeymapKey(0, 2, 0, KC_A); + + set_keymap({mod_tap_hold_key, regular_key}); + + /* Press mod-tap-hold key. */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + mod_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press regular key. */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + regular_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release regular key. */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + regular_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release mod-tap-hold key. */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P, KC_A))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Idle for tapping term of mod tap hold key. */ + idle_for(TAPPING_TERM - 3); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(DefaultTapHold, tap_mod_tap_key_while_mod_tap_key_is_held) { + TestDriver driver; + InSequence s; + auto first_mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); + auto second_mod_tap_hold_key = KeymapKey(0, 2, 0, RSFT_T(KC_A)); + + set_keymap({first_mod_tap_hold_key, second_mod_tap_hold_key}); + + /* Press first mod-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + first_mod_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press second tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + second_mod_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release second tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + second_mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release first mod-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P, KC_A))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + first_mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(DefaultTapHold, tap_regular_key_while_layer_tap_key_is_held) { + TestDriver driver; + InSequence s; + auto layer_tap_hold_key = KeymapKey(0, 1, 0, LT(1, KC_P)); + auto regular_key = KeymapKey(0, 2, 0, KC_A); + auto layer_key = KeymapKey(1, 2, 0, KC_B); + + set_keymap({layer_tap_hold_key, regular_key, layer_key}); + + /* Press layer-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + layer_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press regular key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + regular_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release regular key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + regular_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release layer-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_A, KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(_)); + layer_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(DefaultTapHold, tap_mod_tap_hold_key_two_times) { + GTEST_SKIP() << "TODO:Holding a modtap key results in out of bounds access to the keymap, this is a bug in QMK."; + + TestDriver driver; + InSequence s; + auto mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); + + set_keymap({mod_tap_hold_key}); + + /* Press mod-tap-hold key. */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + mod_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release mod-tap-hold key. */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press mod-tap-hold key again. */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + mod_tap_hold_key.press(); + idle_for(TAPPING_TERM); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release mod-tap-hold key. */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(DefaultTapHold, tap_mod_tap_hold_key_twice_and_hold_on_second_time) { + GTEST_SKIP() << "TODO:Holding a modtap key results in out of bounds access to the keymap, this is a bug in QMK."; + + TestDriver driver; + InSequence s; + auto mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); + + set_keymap({mod_tap_hold_key}); + + /* Press mod-tap-hold key. */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + mod_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release mod-tap-hold key. */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press mod-tap-hold key again. */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + mod_tap_hold_key.press(); + idle_for(TAPPING_TERM); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release mod-tap-hold key. */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(DefaultTapHold, tap_and_hold_mod_tap_hold_key) { + TestDriver driver; + InSequence s; + auto mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); + + set_keymap({mod_tap_hold_key}); + + /* Press mod-tap-hold key. */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSHIFT))); + mod_tap_hold_key.press(); + idle_for(TAPPING_TERM + 1); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release mod-tap-hold key. */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} \ No newline at end of file diff --git a/tests/tap_hold_configurations/ignore_mod_tap_interrupt/config.h b/tests/tap_hold_configurations/ignore_mod_tap_interrupt/config.h new file mode 100644 index 0000000000..5955b8600a --- /dev/null +++ b/tests/tap_hold_configurations/ignore_mod_tap_interrupt/config.h @@ -0,0 +1,21 @@ +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "test_common.h" + +#define IGNORE_MOD_TAP_INTERRUPT \ No newline at end of file diff --git a/tests/tap_hold_configurations/ignore_mod_tap_interrupt/test.mk b/tests/tap_hold_configurations/ignore_mod_tap_interrupt/test.mk new file mode 100644 index 0000000000..efecca2c22 --- /dev/null +++ b/tests/tap_hold_configurations/ignore_mod_tap_interrupt/test.mk @@ -0,0 +1,18 @@ +# Copyright 2021 Stefan Kerkmann +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# -------------------------------------------------------------------------------- +# Keep this file, even if it is empty, as a marker that this folder contains tests +# -------------------------------------------------------------------------------- diff --git a/tests/tap_hold_configurations/ignore_mod_tap_interrupt/test_tap_hold.cpp b/tests/tap_hold_configurations/ignore_mod_tap_interrupt/test_tap_hold.cpp new file mode 100644 index 0000000000..1702d604d3 --- /dev/null +++ b/tests/tap_hold_configurations/ignore_mod_tap_interrupt/test_tap_hold.cpp @@ -0,0 +1,136 @@ +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "keyboard_report_util.hpp" +#include "keycode.h" +#include "test_common.hpp" +#include "action_tapping.h" +#include "test_fixture.hpp" +#include "test_keymap_key.hpp" + +using testing::_; +using testing::InSequence; + +class IgnoreModTapInterrupt : public TestFixture {}; + +TEST_F(IgnoreModTapInterrupt, tap_regular_key_while_mod_tap_key_is_held) { + TestDriver driver; + InSequence s; + auto mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); + auto regular_key = KeymapKey(0, 2, 0, KC_A); + + set_keymap({mod_tap_hold_key, regular_key}); + + /* Press mod-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + mod_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press regular key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + regular_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release regular key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + regular_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release mod-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_A, KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(IgnoreModTapInterrupt, tap_mod_tap_key_while_mod_tap_key_is_held) { + TestDriver driver; + InSequence s; + auto first_mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); + auto second_mod_tap_hold_key = KeymapKey(0, 2, 0, RSFT_T(KC_A)); + + set_keymap({first_mod_tap_hold_key, second_mod_tap_hold_key}); + + /* Press first mod-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + first_mod_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press second tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + second_mod_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release second tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + second_mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release first mod-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_A, KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + first_mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(IgnoreModTapInterrupt, tap_regular_key_while_layer_tap_key_is_held) { + TestDriver driver; + InSequence s; + auto layer_tap_hold_key = KeymapKey(0, 1, 0, LT(1, KC_P)); + auto regular_key = KeymapKey(0, 2, 0, KC_A); + auto layer_key = KeymapKey(1, 2, 0, KC_B); + + set_keymap({layer_tap_hold_key, regular_key, layer_key}); + + /* Press layer-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + layer_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press regular key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + regular_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release regular key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + regular_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release layer-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P, regular_key.report_code))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + layer_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} diff --git a/tests/tap_hold_configurations/permissive_hold/config.h b/tests/tap_hold_configurations/permissive_hold/config.h new file mode 100644 index 0000000000..2d5a9849e7 --- /dev/null +++ b/tests/tap_hold_configurations/permissive_hold/config.h @@ -0,0 +1,21 @@ +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "test_common.h" + +#define PERMISSIVE_HOLD \ No newline at end of file diff --git a/tests/tap_hold_configurations/permissive_hold/test.mk b/tests/tap_hold_configurations/permissive_hold/test.mk new file mode 100644 index 0000000000..efecca2c22 --- /dev/null +++ b/tests/tap_hold_configurations/permissive_hold/test.mk @@ -0,0 +1,18 @@ +# Copyright 2021 Stefan Kerkmann +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# -------------------------------------------------------------------------------- +# Keep this file, even if it is empty, as a marker that this folder contains tests +# -------------------------------------------------------------------------------- diff --git a/tests/tap_hold_configurations/permissive_hold/test_one_shot_keys.cpp b/tests/tap_hold_configurations/permissive_hold/test_one_shot_keys.cpp new file mode 100644 index 0000000000..aa71ec397f --- /dev/null +++ b/tests/tap_hold_configurations/permissive_hold/test_one_shot_keys.cpp @@ -0,0 +1,76 @@ +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "action_util.h" +#include "keyboard_report_util.hpp" +#include "test_common.hpp" + +using testing::_; +using testing::InSequence; + +class OneShot : public TestFixture {}; +class OneShotParametrizedTestFixture : public ::testing::WithParamInterface<std::pair<KeymapKey, KeymapKey>>, public OneShot {}; + +TEST_P(OneShotParametrizedTestFixture, OSMAsRegularModifierWithAdditionalKeypress) { + TestDriver driver; + KeymapKey osm_key = GetParam().first; + KeymapKey regular_key = GetParam().second; + + set_keymap({osm_key, regular_key}); + + /* Press OSM */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + osm_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press regular key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + regular_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release regular key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(osm_key.report_code))).Times(2); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(regular_key.report_code, osm_key.report_code))).Times(1); + regular_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release OSM */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + osm_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +// clang-format off + +INSTANTIATE_TEST_CASE_P( + OneShotModifierTests, + OneShotParametrizedTestFixture, + ::testing::Values( + /* first is osm key, second is regular key. */ + std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_LSFT), KC_LSFT}, KeymapKey{0, 1, 1, KC_A}), + std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_LCTL), KC_LCTL}, KeymapKey{0, 1, 1, KC_A}), + std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_LALT), KC_LALT}, KeymapKey{0, 1, 1, KC_A}), + std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_LGUI), KC_LGUI}, KeymapKey{0, 1, 1, KC_A}), + std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_RCTL), KC_RCTL}, KeymapKey{0, 1, 1, KC_A}), + std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_RSFT), KC_RSFT}, KeymapKey{0, 1, 1, KC_A}), + std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_RALT), KC_RALT}, KeymapKey{0, 1, 1, KC_A}), + std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_RGUI), KC_RGUI}, KeymapKey{0, 1, 1, KC_A}) + )); +// clang-format on \ No newline at end of file diff --git a/tests/tap_hold_configurations/permissive_hold/test_tap_hold.cpp b/tests/tap_hold_configurations/permissive_hold/test_tap_hold.cpp new file mode 100644 index 0000000000..ab9dd1518b --- /dev/null +++ b/tests/tap_hold_configurations/permissive_hold/test_tap_hold.cpp @@ -0,0 +1,132 @@ +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "keyboard_report_util.hpp" +#include "keycode.h" +#include "test_common.hpp" +#include "action_tapping.h" +#include "test_fixture.hpp" +#include "test_keymap_key.hpp" + +using testing::_; +using testing::InSequence; +class PermissiveHold : public TestFixture {}; + +TEST_F(PermissiveHold, tap_regular_key_while_mod_tap_key_is_held) { + TestDriver driver; + InSequence s; + auto mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); + auto regular_key = KeymapKey(0, 2, 0, KC_A); + + set_keymap({mod_tap_hold_key, regular_key}); + + /* Press mod-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + mod_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press regular key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + regular_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release regular key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSHIFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSHIFT, regular_key.report_code))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSHIFT))); + regular_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release mod-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(PermissiveHold, tap_mod_tap_key_while_mod_tap_key_is_held) { + TestDriver driver; + InSequence s; + auto first_mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); + auto second_mod_tap_hold_key = KeymapKey(0, 2, 0, RSFT_T(KC_A)); + + set_keymap({first_mod_tap_hold_key, second_mod_tap_hold_key}); + + /* Press first mod-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + first_mod_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press second mod-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + second_mod_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release second mod-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSHIFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSHIFT, second_mod_tap_hold_key.report_code))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSHIFT))); + second_mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release first mod-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + first_mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(PermissiveHold, tap_regular_key_while_layer_tap_key_is_held) { + TestDriver driver; + InSequence s; + auto layer_tap_hold_key = KeymapKey(0, 1, 0, LT(1, KC_P)); + auto regular_key = KeymapKey(0, 2, 0, KC_A); + auto layer_key = KeymapKey(1, 2, 0, KC_B); + + set_keymap({layer_tap_hold_key, regular_key, layer_key}); + + /* Press layer-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + layer_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press regular key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + regular_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release regular key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(layer_key.report_code))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + regular_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release layer-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + layer_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} \ No newline at end of file diff --git a/tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/config.h b/tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/config.h new file mode 100644 index 0000000000..a6abd50bbe --- /dev/null +++ b/tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/config.h @@ -0,0 +1,22 @@ +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "test_common.h" + +#define IGNORE_MOD_TAP_INTERRUPT +#define PERMISSIVE_HOLD \ No newline at end of file diff --git a/tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/test.mk b/tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/test.mk new file mode 100644 index 0000000000..efecca2c22 --- /dev/null +++ b/tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/test.mk @@ -0,0 +1,18 @@ +# Copyright 2021 Stefan Kerkmann +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# -------------------------------------------------------------------------------- +# Keep this file, even if it is empty, as a marker that this folder contains tests +# -------------------------------------------------------------------------------- diff --git a/tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/test_tap_hold.cpp b/tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/test_tap_hold.cpp new file mode 100644 index 0000000000..67f394653f --- /dev/null +++ b/tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/test_tap_hold.cpp @@ -0,0 +1,134 @@ + +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "keyboard_report_util.hpp" +#include "keycode.h" +#include "test_common.hpp" +#include "action_tapping.h" +#include "test_fixture.hpp" +#include "test_keymap_key.hpp" + +using testing::_; +using testing::InSequence; + +class PermissiveHold_IgnoreModTapInterrupt : public TestFixture {}; + +TEST_F(PermissiveHold_IgnoreModTapInterrupt, tap_regular_key_while_mod_tap_key_is_held) { + TestDriver driver; + InSequence s; + auto mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); + auto regular_key = KeymapKey(0, 2, 0, KC_A); + + set_keymap({mod_tap_hold_key, regular_key}); + + /* Press mod-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + mod_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press regular key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + regular_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release regular key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_A))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); + regular_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release mod-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(PermissiveHold_IgnoreModTapInterrupt, tap_mod_tap_key_while_mod_tap_key_is_held) { + TestDriver driver; + InSequence s; + auto first_mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); + auto second_mod_tap_hold_key = KeymapKey(0, 2, 0, RSFT_T(KC_A)); + + set_keymap({first_mod_tap_hold_key, second_mod_tap_hold_key}); + + /* Press first mod-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + first_mod_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press second tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + second_mod_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release second tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_A))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); + second_mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release first mod-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + first_mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(PermissiveHold_IgnoreModTapInterrupt, tap_regular_key_while_layer_tap_key_is_held) { + TestDriver driver; + InSequence s; + auto layer_tap_hold_key = KeymapKey(0, 1, 0, LT(1, KC_P)); + auto regular_key = KeymapKey(0, 2, 0, KC_A); + auto layer_key = KeymapKey(1, 2, 0, KC_B); + + set_keymap({layer_tap_hold_key, regular_key, layer_key}); + + /* Press layer-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + layer_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press regular key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + regular_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release regular key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_B))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + regular_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release layer-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + layer_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} \ No newline at end of file diff --git a/tests/tap_hold_configurations/retro_tapping/config.h b/tests/tap_hold_configurations/retro_tapping/config.h new file mode 100644 index 0000000000..4b38f2644b --- /dev/null +++ b/tests/tap_hold_configurations/retro_tapping/config.h @@ -0,0 +1,21 @@ +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "test_common.h" + +#define RETRO_TAPPING \ No newline at end of file diff --git a/tests/tap_hold_configurations/retro_tapping/test.mk b/tests/tap_hold_configurations/retro_tapping/test.mk new file mode 100644 index 0000000000..efecca2c22 --- /dev/null +++ b/tests/tap_hold_configurations/retro_tapping/test.mk @@ -0,0 +1,18 @@ +# Copyright 2021 Stefan Kerkmann +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# -------------------------------------------------------------------------------- +# Keep this file, even if it is empty, as a marker that this folder contains tests +# -------------------------------------------------------------------------------- diff --git a/tests/tap_hold_configurations/retro_tapping/test_tap_hold.cpp b/tests/tap_hold_configurations/retro_tapping/test_tap_hold.cpp new file mode 100644 index 0000000000..59ae77f781 --- /dev/null +++ b/tests/tap_hold_configurations/retro_tapping/test_tap_hold.cpp @@ -0,0 +1,52 @@ + +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "keyboard_report_util.hpp" +#include "keycode.h" +#include "test_common.hpp" +#include "action_tapping.h" +#include "test_fixture.hpp" +#include "test_keymap_key.hpp" + +using testing::_; +using testing::InSequence; + +class RetroTapping : public TestFixture {}; + +TEST_F(RetroTapping, tap_and_hold_mod_tap_hold_key) { + TestDriver driver; + InSequence s; + auto mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); + + set_keymap({mod_tap_hold_key}); + + /* Press mod-tap-hold key. */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + mod_tap_hold_key.press(); + idle_for(TAPPING_TERM); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release mod-tap-hold key. */ + /* TODO: Why is LSHIFT send at all? */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSHIFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} \ No newline at end of file diff --git a/tests/tap_hold_configurations/retro_tapping/test_tapping.cpp b/tests/tap_hold_configurations/retro_tapping/test_tapping.cpp new file mode 100644 index 0000000000..cf23df8317 --- /dev/null +++ b/tests/tap_hold_configurations/retro_tapping/test_tapping.cpp @@ -0,0 +1,112 @@ +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "keyboard_report_util.hpp" +#include "keycode.h" +#include "test_common.hpp" +#include "action_tapping.h" +#include "test_keymap_key.hpp" + +using testing::_; +using testing::InSequence; + +class Tapping : public TestFixture {}; + +TEST_F(Tapping, HoldA_SHFT_T_KeyReportsShift) { + TestDriver driver; + InSequence s; + auto mod_tap_hold_key = KeymapKey(0, 7, 0, SFT_T(KC_P)); + + set_keymap({mod_tap_hold_key}); + + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + mod_tap_hold_key.press(); + idle_for(TAPPING_TERM); + testing::Mock::VerifyAndClearExpectations(&driver); + + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(Tapping, ANewTapWithinTappingTermIsBuggy) { + TestDriver driver; + InSequence s; + auto key_shift_hold_p_tap = KeymapKey(0, 7, 0, SFT_T(KC_P)); + + set_keymap({key_shift_hold_p_tap}); + + /* Press mod_tap_hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + key_shift_hold_p_tap.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release mod_tap_hold key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + key_shift_hold_p_tap.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press mod_tap_hold key again */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + key_shift_hold_p_tap.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release mod_tap_hold key again */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + key_shift_hold_p_tap.release(); + idle_for(TAPPING_TERM + 1); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press mod_tap_hold key again */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + key_shift_hold_p_tap.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release mod_tap_hold key again */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + key_shift_hold_p_tap.release(); + idle_for(TAPPING_TERM + 1); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press mod_tap_hold key again */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + key_shift_hold_p_tap.press(); + idle_for(TAPPING_TERM); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release mod_tap_hold key again */ + /* TODO: Why is KC_LSFT send? */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + key_shift_hold_p_tap.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} \ No newline at end of file diff --git a/tests/tap_hold_configurations/tapping_force_hold/config.h b/tests/tap_hold_configurations/tapping_force_hold/config.h new file mode 100644 index 0000000000..3b4646338a --- /dev/null +++ b/tests/tap_hold_configurations/tapping_force_hold/config.h @@ -0,0 +1,21 @@ +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "test_common.h" + +#define TAPPING_FORCE_HOLD \ No newline at end of file diff --git a/tests/tap_hold_configurations/tapping_force_hold/test.mk b/tests/tap_hold_configurations/tapping_force_hold/test.mk new file mode 100644 index 0000000000..efecca2c22 --- /dev/null +++ b/tests/tap_hold_configurations/tapping_force_hold/test.mk @@ -0,0 +1,18 @@ +# Copyright 2021 Stefan Kerkmann +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# -------------------------------------------------------------------------------- +# Keep this file, even if it is empty, as a marker that this folder contains tests +# -------------------------------------------------------------------------------- diff --git a/tests/tap_hold_configurations/tapping_force_hold/test_action_layer.cpp b/tests/tap_hold_configurations/tapping_force_hold/test_action_layer.cpp new file mode 100644 index 0000000000..02416eed73 --- /dev/null +++ b/tests/tap_hold_configurations/tapping_force_hold/test_action_layer.cpp @@ -0,0 +1,81 @@ +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "keyboard_report_util.hpp" +#include "test_common.hpp" + +using testing::_; +using testing::InSequence; + +class ActionLayer : public TestFixture {}; + +TEST_F(ActionLayer, LayerTapToggleWithToggleWithKeypress) { + TestDriver driver; + KeymapKey layer_key = KeymapKey{0, 0, 0, TT(1)}; + + /* These keys must have the same position in the matrix, only the layer is different. */ + KeymapKey regular_key = KeymapKey{0, 1, 0, KC_A}; + set_keymap({layer_key, regular_key, KeymapKey{1, 1, 0, KC_B}}); + + /* Tap TT five times . */ + /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ + /* TODO: Tapping Force Hold breaks TT */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(10); + + layer_key.press(); + run_one_scan_loop(); + layer_key.release(); + run_one_scan_loop(); + expect_layer_state(0); + + layer_key.press(); + run_one_scan_loop(); + layer_key.release(); + run_one_scan_loop(); + expect_layer_state(0); + + layer_key.press(); + run_one_scan_loop(); + layer_key.release(); + run_one_scan_loop(); + expect_layer_state(0); + + layer_key.press(); + run_one_scan_loop(); + layer_key.release(); + run_one_scan_loop(); + expect_layer_state(0); + + layer_key.press(); + run_one_scan_loop(); + layer_key.release(); + run_one_scan_loop(); + expect_layer_state(0); + + testing::Mock::VerifyAndClearExpectations(&driver); + + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_A))).Times(1); + regular_key.press(); + run_one_scan_loop(); + expect_layer_state(0); + testing::Mock::VerifyAndClearExpectations(&driver); + + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + regular_key.release(); + run_one_scan_loop(); + expect_layer_state(0); + testing::Mock::VerifyAndClearExpectations(&driver); +} \ No newline at end of file diff --git a/tests/tap_hold_configurations/tapping_force_hold/test_tap_hold.cpp b/tests/tap_hold_configurations/tapping_force_hold/test_tap_hold.cpp new file mode 100644 index 0000000000..cb68429617 --- /dev/null +++ b/tests/tap_hold_configurations/tapping_force_hold/test_tap_hold.cpp @@ -0,0 +1,215 @@ + +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "keyboard_report_util.hpp" +#include "keycode.h" +#include "test_common.hpp" +#include "action_tapping.h" +#include "test_fixture.hpp" +#include "test_keymap_key.hpp" + +using testing::_; +using testing::InSequence; + +class TappingForceHold : public TestFixture {}; + +TEST_F(TappingForceHold, tap_regular_key_while_mod_tap_key_is_held) { + TestDriver driver; + InSequence s; + auto mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); + auto regular_key = KeymapKey(0, 2, 0, KC_A); + + set_keymap({mod_tap_hold_key, regular_key}); + + /* Press mod-tap-hold key. */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + mod_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press regular key. */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + regular_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release regular key. */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + regular_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release mod-tap-hold key. */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); + mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Idle for tapping term of mod tap hold key. */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_A))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + idle_for(TAPPING_TERM - 3); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(TappingForceHold, tap_mod_tap_key_while_mod_tap_key_is_held) { + TestDriver driver; + InSequence s; + auto first_mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); + auto second_mod_tap_hold_key = KeymapKey(0, 2, 0, RSFT_T(KC_A)); + + set_keymap({first_mod_tap_hold_key, second_mod_tap_hold_key}); + + /* Press first mod-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + first_mod_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press second tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + second_mod_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release second tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + second_mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release first mod-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); + first_mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Idle for tapping term of first mod tap hold key. */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_A))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + idle_for(TAPPING_TERM - 3); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(TappingForceHold, tap_regular_key_while_layer_tap_key_is_held) { + TestDriver driver; + InSequence s; + auto layer_tap_hold_key = KeymapKey(0, 1, 0, LT(1, KC_P)); + auto regular_key = KeymapKey(0, 2, 0, KC_A); + auto layer_key = KeymapKey(1, 2, 0, KC_B); + + set_keymap({layer_tap_hold_key, regular_key, layer_key}); + + /* Press layer-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + layer_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press regular key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + regular_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release regular key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + regular_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release layer-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_A, KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(_)); + layer_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(TappingForceHold, tap_mod_tap_hold_key_two_times) { + TestDriver driver; + InSequence s; + auto mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); + + set_keymap({mod_tap_hold_key}); + + /* Press mod-tap-hold key. */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + mod_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release mod-tap-hold key. */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press mod-tap-hold key again. */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + mod_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release mod-tap-hold key. */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(TappingForceHold, tap_mod_tap_hold_key_twice_and_hold_on_second_time) { + TestDriver driver; + InSequence s; + auto mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); + + set_keymap({mod_tap_hold_key}); + + /* Press mod-tap-hold key. */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + mod_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release mod-tap-hold key. */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press mod-tap-hold key again. */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + mod_tap_hold_key.press(); + idle_for(TAPPING_TERM); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release mod-tap-hold key. */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSHIFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} diff --git a/tests/basic/rules.mk b/tests/test_common/build.mk similarity index 92% rename from tests/basic/rules.mk rename to tests/test_common/build.mk index 9fb5d43610..aeb3057854 100644 --- a/tests/basic/rules.mk +++ b/tests/test_common/build.mk @@ -1,4 +1,4 @@ -# Copyright 2017 Fred Sundvik +# Copyright 2021 Stefan Kerkmann # # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -13,4 +13,4 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. -CUSTOM_MATRIX=yes +CUSTOM_MATRIX=yes \ No newline at end of file diff --git a/tests/test_common/keyboard_report_util.cpp b/tests/test_common/keyboard_report_util.cpp index f73cf239e0..e148c76beb 100644 --- a/tests/test_common/keyboard_report_util.cpp +++ b/tests/test_common/keyboard_report_util.cpp @@ -44,16 +44,21 @@ bool operator==(const report_keyboard_t& lhs, const report_keyboard_t& rhs) { return lhs.mods == rhs.mods && lhskeys == rhskeys; } -std::ostream& operator<<(std::ostream& stream, const report_keyboard_t& value) { - stream << "Keyboard report:" << std::endl; - stream << "Mods: " << (uint32_t)value.mods << std::endl; - stream << "Keys: "; +std::ostream& operator<<(std::ostream& stream, const report_keyboard_t& report) { + auto keys = get_keys(report); + // TODO: This should probably print friendly names for the keys - for (uint32_t k : get_keys(value)) { - stream << k << " "; + stream << "Keyboard Report: Mods (" << (uint32_t)report.mods << ") Keys ("; + + for (auto key = keys.cbegin(); key != keys.cend();) { + stream << +(*key); + key++; + if (key != keys.cend()) { + stream << ","; + } } - stream << std::endl; - return stream; + + return stream << ")" << std::endl; } KeyboardReportMatcher::KeyboardReportMatcher(const std::vector<uint8_t>& keys) { diff --git a/tests/test_common/keymap.c b/tests/test_common/keymap.c new file mode 100644 index 0000000000..fc3a56a007 --- /dev/null +++ b/tests/test_common/keymap.c @@ -0,0 +1,33 @@ +/* Copyright 2017 Fred Sundvik + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "quantum.h" + +// clang-format off + +const uint16_t PROGMEM + keymaps[][MATRIX_ROWS][MATRIX_COLS] = + { + [0] = + { + {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO}, + {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO}, + {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO}, + {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO}, + }, +}; + +// clang-format on diff --git a/tests/test_common/test_common.h b/tests/test_common/test_common.h new file mode 100644 index 0000000000..19ffcddcea --- /dev/null +++ b/tests/test_common/test_common.h @@ -0,0 +1,4 @@ +#pragma once + +#define MATRIX_ROWS 4 +#define MATRIX_COLS 10 \ No newline at end of file diff --git a/tests/test_common/test_driver.cpp b/tests/test_common/test_driver.cpp index 84e249d838..2fa2b6a2e7 100644 --- a/tests/test_common/test_driver.cpp +++ b/tests/test_common/test_driver.cpp @@ -27,7 +27,10 @@ TestDriver::~TestDriver() { m_this = nullptr; } uint8_t TestDriver::keyboard_leds(void) { return m_this->m_leds; } -void TestDriver::send_keyboard(report_keyboard_t* report) { m_this->send_keyboard_mock(*report); } +void TestDriver::send_keyboard(report_keyboard_t* report) { + test_logger.trace() << *report; + m_this->send_keyboard_mock(*report); +} void TestDriver::send_mouse(report_mouse_t* report) { m_this->send_mouse_mock(*report); } diff --git a/tests/test_common/test_driver.hpp b/tests/test_common/test_driver.hpp index f86308df95..f9197b3634 100644 --- a/tests/test_common/test_driver.hpp +++ b/tests/test_common/test_driver.hpp @@ -20,25 +20,26 @@ #include <stdint.h> #include "host.h" #include "keyboard_report_util.hpp" - +#include "test_logger.hpp" class TestDriver { -public: + public: TestDriver(); ~TestDriver(); void set_leds(uint8_t leds) { m_leds = leds; } - MOCK_METHOD1(send_keyboard_mock, void (report_keyboard_t&)); - MOCK_METHOD1(send_mouse_mock, void (report_mouse_t&)); - MOCK_METHOD1(send_system_mock, void (uint16_t)); - MOCK_METHOD1(send_consumer_mock, void (uint16_t)); -private: - static uint8_t keyboard_leds(void); - static void send_keyboard(report_keyboard_t *report); - static void send_mouse(report_mouse_t* report); - static void send_system(uint16_t data); - static void send_consumer(uint16_t data); - host_driver_t m_driver; - uint8_t m_leds = 0; + MOCK_METHOD1(send_keyboard_mock, void(report_keyboard_t&)); + MOCK_METHOD1(send_mouse_mock, void(report_mouse_t&)); + MOCK_METHOD1(send_system_mock, void(uint16_t)); + MOCK_METHOD1(send_consumer_mock, void(uint16_t)); + + private: + static uint8_t keyboard_leds(void); + static void send_keyboard(report_keyboard_t* report); + static void send_mouse(report_mouse_t* report); + static void send_system(uint16_t data); + static void send_consumer(uint16_t data); + host_driver_t m_driver; + uint8_t m_leds = 0; static TestDriver* m_this; }; diff --git a/tests/test_common/test_fixture.cpp b/tests/test_common/test_fixture.cpp index e041df7128..0601b17191 100644 --- a/tests/test_common/test_fixture.cpp +++ b/tests/test_common/test_fixture.cpp @@ -1,26 +1,48 @@ #include "test_fixture.hpp" +#include <algorithm> +#include <cstdint> +#include <cstdio> +#include <cstdlib> +#include "gmock/gmock-cardinalities.h" #include "gmock/gmock.h" +#include "gtest/gtest.h" +#include "keyboard_report_util.hpp" +#include "keycode.h" #include "test_driver.hpp" +#include "test_logger.hpp" #include "test_matrix.h" -#include "keyboard.h" -#include "action.h" -#include "action_tapping.h" +#include "test_keymap_key.hpp" extern "C" { +#include "action.h" +#include "action_tapping.h" +#include "action_util.h" +#include "action_layer.h" #include "debug.h" #include "eeconfig.h" -#include "action_layer.h" +#include "keyboard.h" +#include "keymap.h" void set_time(uint32_t t); void advance_time(uint32_t ms); } using testing::_; -using testing::AnyNumber; -using testing::Between; -using testing::Return; + +/* This is used for dynamic dispatching keymap_key_to_keycode calls to the current active test_fixture. */ +TestFixture* TestFixture::m_this = nullptr; + +/* Override weak QMK function to allow the usage of isolated per-test keymaps in unit-tests. + * The actual call is dynamicaly dispatched to the current active test fixture, which in turn has it's own keymap. */ +extern "C" uint16_t keymap_key_to_keycode(uint8_t layer, keypos_t position) { + uint16_t keycode; + TestFixture::m_this->get_keycode(layer, position, &keycode); + return keycode; +} void TestFixture::SetUpTestCase() { + test_logger.info() << "TestFixture setup-up start." << std::endl; + // The following is enough to bootstrap the values set in main eeconfig_init_quantum(); eeconfig_update_debug(debug_config.raw); @@ -28,23 +50,99 @@ void TestFixture::SetUpTestCase() { TestDriver driver; EXPECT_CALL(driver, send_keyboard_mock(_)); keyboard_init(); + + test_logger.info() << "TestFixture setup-up end." << std::endl; } void TestFixture::TearDownTestCase() {} -TestFixture::TestFixture() {} +TestFixture::TestFixture() { m_this = this; } TestFixture::~TestFixture() { + test_logger.info() << "TestFixture clean-up start." << std::endl; TestDriver driver; - // Run for a while to make sure all keys are completely released - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(AnyNumber()); - layer_clear(); + + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(2); + + /* Reset keyboard state. */ clear_all_keys(); - idle_for(TAPPING_TERM + 10); + + clear_keyboard(); + + clear_oneshot_mods(); + clear_oneshot_locked_mods(); + reset_oneshot_layer(); + + layer_clear(); + +#if defined(SWAP_HANDS_ENABLE) + clear_oneshot_swaphands(); +#endif + + idle_for(TAPPING_TERM * 10); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Verify that the matrix really is cleared */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + idle_for(TAPPING_TERM * 10); testing::Mock::VerifyAndClearExpectations(&driver); - // Verify that the matrix really is cleared - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(0); - idle_for(TAPPING_TERM + 10); + + m_this = nullptr; + + test_logger.info() << "TestFixture clean-up end." << std::endl; + + print_test_log(); +} + +void TestFixture::add_key(KeymapKey key) { + if (this->find_key(key.layer, key.position)) { + FAIL() << "Key is already mapped for layer " << +key.layer << " and (column,row) (" << +key.position.col << "," << +key.position.row << ")"; + } + + this->keymap.push_back(key); +} + +void TestFixture::set_keymap(std::initializer_list<KeymapKey> keys) { + this->keymap.clear(); + for (auto& key : keys) { + add_key(key); + } +} + +const KeymapKey* TestFixture::find_key(layer_t layer, keypos_t position) const { + auto keymap_key_predicate = [&](KeymapKey candidate) { return candidate.layer == layer && candidate.position.col == position.col && candidate.position.row == position.row; }; + + auto result = std::find_if(this->keymap.begin(), this->keymap.end(), keymap_key_predicate); + + if (result != std::end(this->keymap)) { + return &(*result); + } + return nullptr; +} + +void TestFixture::get_keycode(const layer_t layer, const keypos_t position, uint16_t* result) const { + bool key_is_out_of_bounds = position.col >= MATRIX_COLS && position.row >= MATRIX_ROWS; + + if (key_is_out_of_bounds) { + /* See if this is done in hardware as well, because this is 100% out of bounds reads on all QMK keebs out there. */ + auto msg = [&]() { + std::stringstream msg; + msg << "Keycode for position (" << +position.col << "," << +position.row << ") requested! This is out of bounds." << std::endl; + return msg.str(); + }(); + + *result = KC_NO; + test_logger.error() << msg; + EXPECT_FALSE(key_is_out_of_bounds) << msg; + return; + } + + if (auto key = this->find_key(layer, position)) { + *result = key->code; + return; + } + + FAIL() << "No key is mapped for layer " << +layer << " and (column,row) " << +position.col << "," << +position.row << ")"; } void TestFixture::run_one_scan_loop() { @@ -57,3 +155,17 @@ void TestFixture::idle_for(unsigned time) { run_one_scan_loop(); } } + +void TestFixture::print_test_log() const { + const ::testing::TestInfo* const test_info = ::testing::UnitTest::GetInstance()->current_test_info(); + if (HasFailure()) { + std::cerr << test_info->test_case_name() << "." << test_info->name() << " failed!" << std::endl; + test_logger.print_log(); + } + test_logger.reset(); +} + +void TestFixture::expect_layer_state(layer_t layer_state) const { + test_logger.trace() << "Layer state: (" << +layer_state << ") Highest layer bit: (" << +get_highest_layer(layer_state) << ")" << std::endl; + EXPECT_TRUE(layer_state_is(layer_state)); +} diff --git a/tests/test_common/test_fixture.hpp b/tests/test_common/test_fixture.hpp index 340503665b..73b5d8d3e8 100644 --- a/tests/test_common/test_fixture.hpp +++ b/tests/test_common/test_fixture.hpp @@ -16,15 +16,34 @@ #pragma once +#include <cstdint> +#include <unordered_map> +#include <optional> #include "gtest/gtest.h" +#include "keyboard.h" +#include "test_keymap_key.hpp" class TestFixture : public testing::Test { -public: + public: + static TestFixture* m_this; + TestFixture(); ~TestFixture(); static void SetUpTestCase(); static void TearDownTestCase(); + void set_keymap(std::initializer_list<KeymapKey> keycodes); + void add_key(const KeymapKey key); + + const KeymapKey* find_key(const layer_t layer_t, const keypos_t position) const; + void get_keycode(const layer_t layer, const keypos_t position, uint16_t* result) const; + void run_one_scan_loop(); void idle_for(unsigned ms); + + void expect_layer_state(layer_t layer) const; + + protected: + void print_test_log() const; + std::vector<KeymapKey> keymap; }; diff --git a/tests/test_common/test_keymap_key.cpp b/tests/test_common/test_keymap_key.cpp new file mode 100644 index 0000000000..878ae097bf --- /dev/null +++ b/tests/test_common/test_keymap_key.cpp @@ -0,0 +1,30 @@ +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "test_keymap_key.hpp" +#include "test_logger.hpp" +#include "gtest/gtest-message.h" +#include "gtest/gtest.h" + +void KeymapKey::press() { + test_logger.trace() << "Key pressed: (" << +this->position.col << "," << +this->position.row << ")" << std::endl; + press_key(this->position.col, this->position.row); +} + +void KeymapKey::release() { + test_logger.trace() << "Key released: (" << +this->position.col << "," << +this->position.row << ")" << std::endl; + release_key(this->position.col, this->position.row); +} \ No newline at end of file diff --git a/tests/test_common/test_keymap_key.hpp b/tests/test_common/test_keymap_key.hpp new file mode 100644 index 0000000000..7861cb4a32 --- /dev/null +++ b/tests/test_common/test_keymap_key.hpp @@ -0,0 +1,46 @@ +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +extern "C" { +#include "keyboard.h" +#include "test_matrix.h" +} + +#include <cassert> + +typedef uint8_t layer_t; + +struct KeymapKey { + KeymapKey(layer_t layer, uint8_t col, uint8_t row, uint16_t keycode) : layer(layer), position({.col = col, .row = row}), code(keycode), report_code(keycode) { validate(); } + KeymapKey(layer_t layer, uint8_t col, uint8_t row, uint16_t keycode, uint16_t report_code) : layer(layer), position({.col = col, .row = row}), code(keycode), report_code(report_code) { validate(); } + + void press(); + void release(); + + const layer_t layer; + const keypos_t position; + const uint16_t code; + /* Sometimes the keycode does not match the code that is send in the usb report, so we provide it here. */ + const uint16_t report_code; + + private: + void validate() { + assert(position.col <= MATRIX_COLS); + assert(position.row <= MATRIX_ROWS); + } +}; \ No newline at end of file diff --git a/tests/test_common/test_logger.cpp b/tests/test_common/test_logger.cpp new file mode 100644 index 0000000000..959fdde5ec --- /dev/null +++ b/tests/test_common/test_logger.cpp @@ -0,0 +1,39 @@ +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <iostream> +#include "test_logger.hpp" + +TestLogger test_logger; + +TestLogger& TestLogger::info() { + *this << "[ INFO ] "; + return *this; +} + +TestLogger& TestLogger::trace() { + *this << "[ TRACE ] "; + return *this; +} + +TestLogger& TestLogger::error() { + *this << "[ ERROR ] "; + return *this; +} + +void TestLogger::reset() { this->m_log.str(""); }; + +void TestLogger::print_log() { std::cerr << this->m_log.str(); } diff --git a/tests/test_common/test_logger.hpp b/tests/test_common/test_logger.hpp new file mode 100644 index 0000000000..348af7fab8 --- /dev/null +++ b/tests/test_common/test_logger.hpp @@ -0,0 +1,35 @@ +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include <ostream> +#include <sstream> + +class TestLogger : public std::ostream { + public: + TestLogger() : std::ostream(&m_log){}; + TestLogger& info(); + TestLogger& trace(); + TestLogger& error(); + void print_log(); + void reset(); + + private: + std::stringbuf m_log; +}; + +extern TestLogger test_logger; \ No newline at end of file From 7746aefe94cc4cd492bfafdef73d95d073f0603b Mon Sep 17 00:00:00 2001 From: Nick Brassel <nick@tzarc.org> Date: Tue, 23 Nov 2021 09:54:04 +1100 Subject: [PATCH 565/595] Revert "[Tests] Increase QMK test coverage (#13789)" This reverts commit b6054c0206609f3755f71d819643644d250288b0. --- Makefile | 7 +- build_full_test.mk | 23 +- build_test.mk | 19 +- quantum/quantum_keycodes.h | 34 ++ testlist.mk | 4 +- tests/auto_shift/config.h | 19 - tests/auto_shift/test.mk | 20 - tests/auto_shift/test_auto_shift.cpp | 73 --- tests/basic/config.h | 3 +- tests/basic/keymap.c | 45 ++ .../{test_common/build.mk => basic/rules.mk} | 4 +- tests/basic/test.mk | 18 - tests/basic/test_action_layer.cpp | 427 +++--------------- tests/basic/test_keypress.cpp | 185 +++----- tests/basic/test_macro.cpp | 19 +- tests/basic/test_one_shot_keys.cpp | 197 -------- tests/basic/test_tapping.cpp | 48 +- .../default_mod_tap/config.h | 21 - .../default_mod_tap/test.mk | 18 - .../default_mod_tap/test_tap_hold.cpp | 230 ---------- .../ignore_mod_tap_interrupt/config.h | 21 - .../ignore_mod_tap_interrupt/test.mk | 18 - .../test_tap_hold.cpp | 136 ------ .../permissive_hold/config.h | 21 - .../permissive_hold/test.mk | 18 - .../permissive_hold/test_one_shot_keys.cpp | 76 ---- .../permissive_hold/test_tap_hold.cpp | 132 ------ .../config.h | 22 - .../test.mk | 18 - .../test_tap_hold.cpp | 134 ------ .../retro_tapping/config.h | 21 - .../retro_tapping/test.mk | 18 - .../retro_tapping/test_tap_hold.cpp | 52 --- .../retro_tapping/test_tapping.cpp | 112 ----- .../tapping_force_hold/config.h | 21 - .../tapping_force_hold/test.mk | 18 - .../tapping_force_hold/test_action_layer.cpp | 81 ---- .../tapping_force_hold/test_tap_hold.cpp | 215 --------- tests/test_common/keyboard_report_util.cpp | 21 +- tests/test_common/keymap.c | 33 -- tests/test_common/test_common.h | 4 - tests/test_common/test_driver.cpp | 5 +- tests/test_common/test_driver.hpp | 29 +- tests/test_common/test_fixture.cpp | 142 +----- tests/test_common/test_fixture.hpp | 21 +- tests/test_common/test_keymap_key.cpp | 30 -- tests/test_common/test_keymap_key.hpp | 46 -- tests/test_common/test_logger.cpp | 39 -- tests/test_common/test_logger.hpp | 35 -- 49 files changed, 265 insertions(+), 2688 deletions(-) delete mode 100644 tests/auto_shift/config.h delete mode 100644 tests/auto_shift/test.mk delete mode 100644 tests/auto_shift/test_auto_shift.cpp create mode 100644 tests/basic/keymap.c rename tests/{test_common/build.mk => basic/rules.mk} (92%) delete mode 100644 tests/basic/test.mk delete mode 100644 tests/basic/test_one_shot_keys.cpp delete mode 100644 tests/tap_hold_configurations/default_mod_tap/config.h delete mode 100644 tests/tap_hold_configurations/default_mod_tap/test.mk delete mode 100644 tests/tap_hold_configurations/default_mod_tap/test_tap_hold.cpp delete mode 100644 tests/tap_hold_configurations/ignore_mod_tap_interrupt/config.h delete mode 100644 tests/tap_hold_configurations/ignore_mod_tap_interrupt/test.mk delete mode 100644 tests/tap_hold_configurations/ignore_mod_tap_interrupt/test_tap_hold.cpp delete mode 100644 tests/tap_hold_configurations/permissive_hold/config.h delete mode 100644 tests/tap_hold_configurations/permissive_hold/test.mk delete mode 100644 tests/tap_hold_configurations/permissive_hold/test_one_shot_keys.cpp delete mode 100644 tests/tap_hold_configurations/permissive_hold/test_tap_hold.cpp delete mode 100644 tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/config.h delete mode 100644 tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/test.mk delete mode 100644 tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/test_tap_hold.cpp delete mode 100644 tests/tap_hold_configurations/retro_tapping/config.h delete mode 100644 tests/tap_hold_configurations/retro_tapping/test.mk delete mode 100644 tests/tap_hold_configurations/retro_tapping/test_tap_hold.cpp delete mode 100644 tests/tap_hold_configurations/retro_tapping/test_tapping.cpp delete mode 100644 tests/tap_hold_configurations/tapping_force_hold/config.h delete mode 100644 tests/tap_hold_configurations/tapping_force_hold/test.mk delete mode 100644 tests/tap_hold_configurations/tapping_force_hold/test_action_layer.cpp delete mode 100644 tests/tap_hold_configurations/tapping_force_hold/test_tap_hold.cpp delete mode 100644 tests/test_common/keymap.c delete mode 100644 tests/test_common/test_common.h delete mode 100644 tests/test_common/test_keymap_key.cpp delete mode 100644 tests/test_common/test_keymap_key.hpp delete mode 100644 tests/test_common/test_logger.cpp delete mode 100644 tests/test_common/test_logger.hpp diff --git a/Makefile b/Makefile index 88f430619e..c221cb89e0 100644 --- a/Makefile +++ b/Makefile @@ -378,12 +378,11 @@ define PARSE_ALL_KEYMAPS endef define BUILD_TEST - TEST_PATH := $1 - TEST_NAME := $$(notdir $$(TEST_PATH)) + TEST_NAME := $1 MAKE_TARGET := $2 COMMAND := $1 MAKE_CMD := $$(MAKE) -r -R -C $(ROOT_DIR) -f build_test.mk $$(MAKE_TARGET) - MAKE_VARS := TEST=$$(TEST_NAME) TEST_PATH=$$(TEST_PATH) FULL_TESTS="$$(FULL_TESTS)" + MAKE_VARS := TEST=$$(TEST_NAME) FULL_TESTS="$$(FULL_TESTS)" MAKE_MSG := $$(MSG_MAKE_TEST) $$(eval $$(call BUILD)) ifneq ($$(MAKE_TARGET),clean) @@ -407,7 +406,7 @@ define PARSE_TEST ifeq ($$(TEST_NAME),all) MATCHED_TESTS := $$(TEST_LIST) else - MATCHED_TESTS := $$(foreach TEST, $$(TEST_LIST),$$(if $$(findstring $$(TEST_NAME), $$(notdir $$(TEST))), $$(TEST),)) + MATCHED_TESTS := $$(foreach TEST,$$(TEST_LIST),$$(if $$(findstring $$(TEST_NAME),$$(TEST)),$$(TEST),)) endif $$(foreach TEST,$$(MATCHED_TESTS),$$(eval $$(call BUILD_TEST,$$(TEST),$$(TEST_TARGET)))) endef diff --git a/build_full_test.mk b/build_full_test.mk index 4cd1ac61b5..f8030cb060 100644 --- a/build_full_test.mk +++ b/build_full_test.mk @@ -13,24 +13,21 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. -$(TEST)_INC := \ - tests\test_common\common_config.h +#include $(TMK_PATH)/protocol.mk -$(TEST)_SRC := \ +TEST_PATH=tests/$(TEST) + +$(TEST)_SRC= \ + $(TEST_PATH)/keymap.c \ $(TMK_COMMON_SRC) \ $(QUANTUM_SRC) \ $(SRC) \ - tests/test_common/keymap.c \ tests/test_common/matrix.c \ tests/test_common/test_driver.cpp \ tests/test_common/keyboard_report_util.cpp \ - tests/test_common/test_fixture.cpp \ - tests/test_common/test_keymap_key.cpp \ - tests/test_common/test_logger.cpp \ - $(patsubst $(ROOTDIR)/%,%,$(wildcard $(TEST_PATH)/*.cpp)) - -$(TEST)_DEFS := $(TMK_COMMON_DEFS) $(OPT_DEFS) - -$(TEST)_CONFIG := $(TEST_PATH)/config.h + tests/test_common/test_fixture.cpp +$(TEST)_SRC += $(patsubst $(ROOTDIR)/%,%,$(wildcard $(TEST_PATH)/*.cpp)) -VPATH += $(TOP_DIR)/tests/test_common \ No newline at end of file +$(TEST)_DEFS=$(TMK_COMMON_DEFS) $(OPT_DEFS) +$(TEST)_CONFIG=$(TEST_PATH)/config.h +VPATH+=$(TOP_DIR)/tests/test_common diff --git a/build_test.mk b/build_test.mk index 136a0455f0..36cb7936ed 100644 --- a/build_test.mk +++ b/build_test.mk @@ -16,14 +16,14 @@ TEST_OBJ = $(BUILD_DIR)/test_obj OUTPUTS := $(TEST_OBJ)/$(TEST) $(GTEST_OUTPUT) GTEST_INC := \ - $(LIB_PATH)/googletest/googletest/include \ - $(LIB_PATH)/googletest/googlemock/include + $(LIB_PATH)/googletest/googletest/include\ + $(LIB_PATH)/googletest/googlemock/include\ -GTEST_INTERNAL_INC := \ - $(LIB_PATH)/googletest/googletest \ +GTEST_INTERNAL_INC :=\ + $(LIB_PATH)/googletest/googletest\ $(LIB_PATH)/googletest/googlemock -$(GTEST_OUTPUT)_SRC := \ +$(GTEST_OUTPUT)_SRC :=\ googletest/src/gtest-all.cc\ googlemock/src/gmock-all.cc @@ -33,9 +33,9 @@ $(GTEST_OUTPUT)_INC := $(GTEST_INC) $(GTEST_INTERNAL_INC) LDFLAGS += -lstdc++ -lpthread -shared-libgcc CREATE_MAP := no -VPATH += \ - $(LIB_PATH)/googletest \ - $(LIB_PATH)/googlemock \ +VPATH +=\ + $(LIB_PATH)/googletest\ + $(LIB_PATH)/googlemock\ $(LIB_PATH)/printf all: elf @@ -49,8 +49,7 @@ CONSOLE_ENABLE = yes endif ifneq ($(filter $(FULL_TESTS),$(TEST)),) -include tests/test_common/build.mk -include $(TEST_PATH)/test.mk +include tests/$(TEST)/rules.mk endif include common_features.mk diff --git a/quantum/quantum_keycodes.h b/quantum/quantum_keycodes.h index cde97074d3..d013a6a169 100644 --- a/quantum/quantum_keycodes.h +++ b/quantum/quantum_keycodes.h @@ -558,6 +558,40 @@ enum quantum_keycodes { PROGRAMMABLE_BUTTON_31, PROGRAMMABLE_BUTTON_32, + // Dedicated macro keys for Configurator and VIA + MACRO_0, + MACRO_1, + MACRO_2, + MACRO_3, + MACRO_4, + MACRO_5, + MACRO_6, + MACRO_7, + MACRO_8, + MACRO_9, + MACRO_10, + MACRO_11, + MACRO_12, + MACRO_13, + MACRO_14, + MACRO_15, + MACRO_16, + MACRO_17, + MACRO_18, + MACRO_19, + MACRO_20, + MACRO_21, + MACRO_22, + MACRO_23, + MACRO_24, + MACRO_25, + MACRO_26, + MACRO_27, + MACRO_28, + MACRO_29, + MACRO_30, + MACRO_31, + // Start of custom keycode range for keyboards and keymaps - always leave at the end SAFE_RANGE }; diff --git a/testlist.mk b/testlist.mk index d2bb571be6..cff784dad6 100644 --- a/testlist.mk +++ b/testlist.mk @@ -1,5 +1,5 @@ -TEST_LIST = $(sort $(patsubst %/test.mk,%, $(shell find $(ROOT_DIR)tests -type f -name test.mk))) -FULL_TESTS := $(notdir $(TEST_LIST)) +TEST_LIST = $(notdir $(patsubst %/rules.mk,%,$(wildcard $(ROOT_DIR)/tests/*/rules.mk))) +FULL_TESTS := $(TEST_LIST) include $(QUANTUM_PATH)/debounce/tests/testlist.mk include $(QUANTUM_PATH)/encoder/tests/testlist.mk diff --git a/tests/auto_shift/config.h b/tests/auto_shift/config.h deleted file mode 100644 index 4f343b4529..0000000000 --- a/tests/auto_shift/config.h +++ /dev/null @@ -1,19 +0,0 @@ -/* Copyright 2021 Stefan Kerkmann - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#include "test_common.h" \ No newline at end of file diff --git a/tests/auto_shift/test.mk b/tests/auto_shift/test.mk deleted file mode 100644 index 4259c606e4..0000000000 --- a/tests/auto_shift/test.mk +++ /dev/null @@ -1,20 +0,0 @@ -# Copyright 2021 Stefan Kerkmann -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. - -# -------------------------------------------------------------------------------- -# Keep this file, even if it is empty, as a marker that this folder contains tests -# -------------------------------------------------------------------------------- - -AUTO_SHIFT_ENABLE = yes \ No newline at end of file diff --git a/tests/auto_shift/test_auto_shift.cpp b/tests/auto_shift/test_auto_shift.cpp deleted file mode 100644 index 9c5ed9a832..0000000000 --- a/tests/auto_shift/test_auto_shift.cpp +++ /dev/null @@ -1,73 +0,0 @@ -/* Copyright 2021 Stefan Kerkmann - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "keyboard_report_util.hpp" -#include "keycode.h" -#include "test_common.hpp" -#include "action_tapping.h" -#include "test_fixture.hpp" -#include "test_keymap_key.hpp" - -using testing::_; -using testing::InSequence; - -class AutoShift : public TestFixture {}; - -TEST_F(AutoShift, key_release_before_timeout) { - TestDriver driver; - InSequence s; - auto regular_key = KeymapKey(0, 2, 0, KC_A); - - set_keymap({regular_key}); - - /* Press regular key */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - regular_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release regular key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_A))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - regular_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); -} - -TEST_F(AutoShift, key_release_after_timeout) { - TestDriver driver; - InSequence s; - auto regular_key = KeymapKey(0, 2, 0, KC_A); - - set_keymap({regular_key}); - - /* Press regular key */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - regular_key.press(); - idle_for(AUTO_SHIFT_TIMEOUT); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release regular key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_A))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - regular_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); -} \ No newline at end of file diff --git a/tests/basic/config.h b/tests/basic/config.h index 85fa9d691d..99bd62d991 100644 --- a/tests/basic/config.h +++ b/tests/basic/config.h @@ -16,4 +16,5 @@ #pragma once -#include "test_common.h" \ No newline at end of file +#define MATRIX_ROWS 4 +#define MATRIX_COLS 10 diff --git a/tests/basic/keymap.c b/tests/basic/keymap.c new file mode 100644 index 0000000000..2b5747abb7 --- /dev/null +++ b/tests/basic/keymap.c @@ -0,0 +1,45 @@ +/* Copyright 2017 Fred Sundvik + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "quantum.h" + +// Don't rearrange keys as existing tests might rely on the order +// Col2, Row 0 has to be KC_NO, because tests rely on it + +#define COMBO1 RSFT(LCTL(KC_O)) + +const uint16_t PROGMEM + keymaps[][MATRIX_ROWS][MATRIX_COLS] = + { + [0] = + { + // 0 1 2 3 4 5 6 7 8 9 + {KC_A, KC_B, KC_NO, KC_LSFT, KC_RSFT, KC_LCTL, COMBO1, SFT_T(KC_P), M(0), KC_NO}, + {KC_EQL, KC_PLUS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO}, + {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO}, + {KC_C, KC_D, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO}, + }, +}; + +const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + if (record->event.pressed) { + switch (id) { + case 0: + return MACRO(D(LSFT), T(H), U(LSFT), T(E), T(L), T(L), T(O), T(SPACE), W(100), D(LSFT), T(W), U(LSFT), I(10), T(O), T(R), T(L), T(D), D(LSFT), T(1), U(LSFT), END); + } + } + return MACRO_NONE; +}; diff --git a/tests/test_common/build.mk b/tests/basic/rules.mk similarity index 92% rename from tests/test_common/build.mk rename to tests/basic/rules.mk index aeb3057854..9fb5d43610 100644 --- a/tests/test_common/build.mk +++ b/tests/basic/rules.mk @@ -1,4 +1,4 @@ -# Copyright 2021 Stefan Kerkmann +# Copyright 2017 Fred Sundvik # # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -13,4 +13,4 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. -CUSTOM_MATRIX=yes \ No newline at end of file +CUSTOM_MATRIX=yes diff --git a/tests/basic/test.mk b/tests/basic/test.mk deleted file mode 100644 index 29690d1adf..0000000000 --- a/tests/basic/test.mk +++ /dev/null @@ -1,18 +0,0 @@ -# Copyright 2017 Fred Sundvik -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. - -# -------------------------------------------------------------------------------- -# Keep this file, even if it is empty, as a marker that this folder contains tests -# -------------------------------------------------------------------------------- \ No newline at end of file diff --git a/tests/basic/test_action_layer.cpp b/tests/basic/test_action_layer.cpp index 1b12d13642..d00a0859b9 100644 --- a/tests/basic/test_action_layer.cpp +++ b/tests/basic/test_action_layer.cpp @@ -14,54 +14,39 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include "gtest/gtest.h" -#include "keyboard_report_util.hpp" #include "test_common.hpp" using testing::_; -using testing::InSequence; +using testing::Return; class ActionLayer : public TestFixture {}; -TEST_F(ActionLayer, LayerStateDBG) { - TestDriver driver; - - layer_state_set(0); - - testing::Mock::VerifyAndClearExpectations(&driver); -} - -TEST_F(ActionLayer, LayerStateSet) { - TestDriver driver; - - layer_state_set(0); - EXPECT_EQ(layer_state, 0); - layer_state_set(0b001100); - EXPECT_EQ(layer_state, 0b001100); - - testing::Mock::VerifyAndClearExpectations(&driver); -} - -TEST_F(ActionLayer, LayerStateIs) { - TestDriver driver; - - layer_state_set(0); - EXPECT_EQ(layer_state_is(0), true); - EXPECT_EQ(layer_state_is(1), false); - layer_state_set(1); - EXPECT_EQ(layer_state_is(0), true); - EXPECT_EQ(layer_state_is(1), false); - layer_state_set(2); - EXPECT_EQ(layer_state_is(0), false); - EXPECT_EQ(layer_state_is(1), true); - EXPECT_EQ(layer_state_is(2), false); - - testing::Mock::VerifyAndClearExpectations(&driver); -} +// TEST_F(ActionLayer, LayerStateDBG) { +// layer_state_set(0); +// } + +// TEST_F(ActionLayer, LayerStateSet) { +// layer_state_set(0); +// EXPECT_EQ(layer_state, 0); +// layer_state_set(0b001100); +// EXPECT_EQ(layer_state, 0b001100); +// } + +// TEST_F(ActionLayer, LayerStateIs) { +// layer_state_set(0); +// EXPECT_EQ(layer_state_is(0), true); +// EXPECT_EQ(layer_state_is(1), true); +// layer_state_set(1); +// EXPECT_EQ(layer_state_is(0), true); +// EXPECT_EQ(layer_state_is(1), true); +// layer_state_set(2); +// EXPECT_EQ(layer_state_is(0), false); +// EXPECT_EQ(layer_state_is(1), false); +// EXPECT_EQ(layer_state_is(2), true); +// } TEST_F(ActionLayer, LayerStateCmp) { - TestDriver driver; - uint32_t prev_layer; + uint32_t prev_layer; prev_layer = 0; EXPECT_EQ(layer_state_cmp(prev_layer, 0), true); @@ -75,339 +60,33 @@ TEST_F(ActionLayer, LayerStateCmp) { EXPECT_EQ(layer_state_cmp(prev_layer, 0), false); EXPECT_EQ(layer_state_cmp(prev_layer, 1), true); EXPECT_EQ(layer_state_cmp(prev_layer, 2), false); - - testing::Mock::VerifyAndClearExpectations(&driver); -} - -TEST_F(ActionLayer, LayerClear) { - TestDriver driver; - - layer_clear(); - EXPECT_EQ(layer_state, 0); - - testing::Mock::VerifyAndClearExpectations(&driver); -} - -TEST_F(ActionLayer, LayerMove) { - TestDriver driver; - - layer_move(0); - EXPECT_EQ(layer_state, 1); - layer_move(3); - EXPECT_EQ(layer_state, 0b1000); - - testing::Mock::VerifyAndClearExpectations(&driver); -} - -TEST_F(ActionLayer, LayerOn) { - TestDriver driver; - - layer_clear(); - layer_on(1); - layer_on(3); - layer_on(3); - EXPECT_EQ(layer_state, 0b1010); - - testing::Mock::VerifyAndClearExpectations(&driver); -} - -TEST_F(ActionLayer, LayerOff) { - TestDriver driver; - - layer_clear(); - layer_on(1); - layer_on(3); - layer_off(3); - layer_off(2); - EXPECT_EQ(layer_state, 0b0010); - - testing::Mock::VerifyAndClearExpectations(&driver); -} - -TEST_F(ActionLayer, MomentaryLayerDoesNothing) { - TestDriver driver; - KeymapKey layer_key = KeymapKey{0, 0, 0, MO(1)}; - - set_keymap({layer_key}); - - /* Press and release MO, nothing should happen. */ - /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); - layer_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); - layer_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); -} - -TEST_F(ActionLayer, MomentaryLayerWithKeypress) { - TestDriver driver; - KeymapKey layer_key = KeymapKey{0, 0, 0, MO(1)}; - - /* These keys must have the same position in the matrix, only the layer is different. */ - KeymapKey regular_key = KeymapKey{0, 1, 0, KC_A}; - set_keymap({layer_key, regular_key, KeymapKey{1, 1, 0, KC_B}}); - - /* Press MO. */ - /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); - layer_key.press(); - run_one_scan_loop(); - EXPECT_TRUE(layer_state_is(1)); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Press key on layer 1 */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_B))).Times(1); - regular_key.press(); - run_one_scan_loop(); - EXPECT_TRUE(layer_state_is(1)); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release key on layer 1 */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); - regular_key.release(); - run_one_scan_loop(); - EXPECT_TRUE(layer_state_is(1)); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release MO */ - /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); - layer_key.release(); - run_one_scan_loop(); - EXPECT_TRUE(layer_state_is(0)); - testing::Mock::VerifyAndClearExpectations(&driver); -} - -TEST_F(ActionLayer, ToggleLayerDoesNothing) { - GTEST_SKIP() << "TODO: Toggle layer does not activate the expected layer on key press but on release."; - - TestDriver driver; - KeymapKey layer_key = KeymapKey{0, 0, 0, TG(1)}; - - set_keymap({layer_key}); - - /* Press TG. Layer state should not change as it's applied on release. */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - layer_key.press(); - run_one_scan_loop(); - EXPECT_TRUE(layer_state_is(1)); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release TG. */ - /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); - layer_key.release(); - run_one_scan_loop(); - EXPECT_TRUE(layer_state_is(1)); - testing::Mock::VerifyAndClearExpectations(&driver); -} - -TEST_F(ActionLayer, ToggleLayerUpAndDown) { - GTEST_SKIP() << "TODO: Toggle layer does not activate the expected layer on key press but on release."; - - TestDriver driver; - KeymapKey toggle_layer_1_on_layer_0 = KeymapKey{0, 0, 0, TG(1)}; - KeymapKey toggle_layer_0_on_layer_1 = KeymapKey{1, 1, 0, TG(0)}; - - set_keymap({toggle_layer_1_on_layer_0, toggle_layer_0_on_layer_1}); - - /* Toggle Layer 1. */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - toggle_layer_1_on_layer_0.press(); - run_one_scan_loop(); - EXPECT_TRUE(layer_state_is(1)); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); - toggle_layer_1_on_layer_0.release(); - run_one_scan_loop(); - EXPECT_TRUE(layer_state_is(1)); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Toggle Layer 0. */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - toggle_layer_0_on_layer_1.press(); - run_one_scan_loop(); - EXPECT_TRUE(layer_state_is(0)); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); - toggle_layer_0_on_layer_1.release(); - run_one_scan_loop(); - EXPECT_TRUE(layer_state_is(0)); - testing::Mock::VerifyAndClearExpectations(&driver); -} - -TEST_F(ActionLayer, LayerTapToggleDoesNothing) { - GTEST_SKIP() << "TODO: Tap toggle layer does not activate the expected layer on key press."; - - TestDriver driver; - KeymapKey layer_key = KeymapKey{0, 0, 0, TT(1)}; - - set_keymap({layer_key}); - - /* Press and release TT. */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(0); - layer_key.press(); - run_one_scan_loop(); - EXPECT_TRUE(layer_state_is(1)); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(2); - layer_key.release(); - run_one_scan_loop(); - EXPECT_TRUE(layer_state_is(0)); - testing::Mock::VerifyAndClearExpectations(&driver); -} - -TEST_F(ActionLayer, LayerTapToggleWithKeypress) { - GTEST_SKIP() << "TODO: Tap toggle layer does not activate the expected layer on key press."; - - TestDriver driver; - KeymapKey layer_key = KeymapKey{0, 0, 0, TT(1)}; - - /* These keys must have the same position in the matrix, only the layer is different. */ - KeymapKey regular_key = KeymapKey{0, 1, 0, KC_A}; - set_keymap({layer_key, regular_key, KeymapKey{1, 1, 0, KC_B}}); - - /* Press TT. */ - /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(0); - layer_key.press(); - run_one_scan_loop(); - EXPECT_TRUE(layer_state_is(1)); - testing::Mock::VerifyAndClearExpectations(&driver); - - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_B))).Times(1); - regular_key.press(); - run_one_scan_loop(); - EXPECT_TRUE(layer_state_is(1)); - testing::Mock::VerifyAndClearExpectations(&driver); - - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); - regular_key.release(); - run_one_scan_loop(); - EXPECT_TRUE(layer_state_is(1)); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); - layer_key.release(); - run_one_scan_loop(); - EXPECT_TRUE(layer_state_is(0)); - testing::Mock::VerifyAndClearExpectations(&driver); -} - -TEST_F(ActionLayer, LayerTapToggleWithToggleWithKeypress) { - GTEST_SKIP() << "TODO: Tap toggle layer does not activate the expected layer on key press."; - - TestDriver driver; - KeymapKey layer_key = KeymapKey{0, 0, 0, TT(1)}; - - /* These keys must have the same position in the matrix, only the layer is different. */ - KeymapKey regular_key = KeymapKey{0, 1, 0, KC_A}; - set_keymap({layer_key, regular_key, KeymapKey{1, 1, 0, KC_B}}); - - /* Tap TT five times . */ - /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(9); - - layer_key.press(); - run_one_scan_loop(); - EXPECT_TRUE(layer_state_is(1)); - layer_key.release(); - run_one_scan_loop(); - EXPECT_TRUE(layer_state_is(0)); - - layer_key.press(); - run_one_scan_loop(); - EXPECT_TRUE(layer_state_is(1)); - layer_key.release(); - run_one_scan_loop(); - EXPECT_TRUE(layer_state_is(0)); - - layer_key.press(); - run_one_scan_loop(); - EXPECT_TRUE(layer_state_is(1)); - layer_key.release(); - run_one_scan_loop(); - EXPECT_TRUE(layer_state_is(0)); - - layer_key.press(); - run_one_scan_loop(); - EXPECT_TRUE(layer_state_is(1)); - layer_key.release(); - run_one_scan_loop(); - EXPECT_TRUE(layer_state_is(0)); - - layer_key.press(); - run_one_scan_loop(); - EXPECT_TRUE(layer_state_is(1)); - layer_key.release(); - run_one_scan_loop(); - EXPECT_TRUE(layer_state_is(1)); - - testing::Mock::VerifyAndClearExpectations(&driver); - - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_B))).Times(1); - regular_key.press(); - run_one_scan_loop(); - EXPECT_TRUE(layer_state_is(1)); - testing::Mock::VerifyAndClearExpectations(&driver); - - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); - regular_key.release(); - run_one_scan_loop(); - EXPECT_TRUE(layer_state_is(1)); - testing::Mock::VerifyAndClearExpectations(&driver); } -TEST_F(ActionLayer, LayerTapReleasedBeforeKeypressReleaseWithModifiers) { - GTEST_SKIP() << "TODO: Modifiers are erroneously discarded on layer changes, although a key that introduced the modifier is still held."; - TestDriver driver; - InSequence s; - - KeymapKey layer_0_key_0 = KeymapKey{0, 0, 0, LT(1, KC_T)}; - KeymapKey layer_1_key_1 = KeymapKey{1, 1, 0, RALT(KC_9)}; - - set_keymap({layer_0_key_0, layer_1_key_1}); - - /* Press layer tap and wait for tapping term to switch to layer 1 */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(0); - layer_0_key_0.press(); - idle_for(TAPPING_TERM); - EXPECT_TRUE(layer_state_is(0)); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Press key with layer 1 mapping, result basically expected - * altough more reports are send then necessary. */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RALT))).Times(1); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RALT, KC_9))).Times(1); - layer_1_key_1.press(); - run_one_scan_loop(); - EXPECT_TRUE(layer_state_is(1)); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release layer tap key, no report is send because key is still held. */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - layer_0_key_0.release(); - run_one_scan_loop(); - EXPECT_TRUE(layer_state_is(0)); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Unregister keycode and modifier. */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RALT))).Times(1); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); - layer_1_key_1.release(); - run_one_scan_loop(); - EXPECT_TRUE(layer_state_is(0)); - testing::Mock::VerifyAndClearExpectations(&driver); -} +// TEST_F(ActionLayer, LayerClear) { +// layer_clear(); +// EXPECT_EQ(layer_state, 0); +// } + +// TEST_F(ActionLayer, LayerMove) { +// layer_move(0); +// EXPECT_EQ(layer_state, 1); +// layer_move(3); +// EXPECT_EQ(layer_state, 0b1000); +// } + +// TEST_F(ActionLayer, LayerOn) { +// layer_clear(); +// layer_on(1); +// layer_on(3); +// layer_on(3); +// EXPECT_EQ(layer_state, 0b1010); +// } + +// TEST_F(ActionLayer, LayerOff) { +// layer_clear(); +// layer_on(1); +// layer_on(3); +// layer_off(3); +// layer_off(2); +// EXPECT_EQ(layer_state, 0b1000); +// } diff --git a/tests/basic/test_keypress.cpp b/tests/basic/test_keypress.cpp index 70613bbd6d..cf839f8c16 100644 --- a/tests/basic/test_keypress.cpp +++ b/tests/basic/test_keypress.cpp @@ -14,11 +14,11 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include "keycode.h" #include "test_common.hpp" using testing::_; using testing::InSequence; +using testing::Return; class KeyPress : public TestFixture {}; @@ -30,156 +30,95 @@ TEST_F(KeyPress, SendKeyboardIsNotCalledWhenNoKeyIsPressed) { TEST_F(KeyPress, CorrectKeyIsReportedWhenPressed) { TestDriver driver; - auto key = KeymapKey(0, 0, 0, KC_A); - - set_keymap({key}); - - key.press(); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(key.report_code))); + press_key(0, 0); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_A))); keyboard_task(); - - key.release(); + release_key(0, 0); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); keyboard_task(); } -TEST_F(KeyPress, ANonMappedKeyDoesNothing) { - TestDriver driver; - auto key = KeymapKey(0, 0, 0, KC_NO); - - set_keymap({key}); - - key.press(); - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - keyboard_task(); - keyboard_task(); -} - TEST_F(KeyPress, CorrectKeysAreReportedWhenTwoKeysArePressed) { TestDriver driver; - auto key_b = KeymapKey(0, 0, 0, KC_B); - auto key_c = KeymapKey(0, 1, 1, KC_C); - - set_keymap({key_b, key_c}); - - key_b.press(); - key_c.press(); + press_key(1, 0); + press_key(0, 3); // Note that QMK only processes one key at a time // See issue #1476 for more information - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(key_b.report_code))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_B))); keyboard_task(); - - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(key_b.report_code, key_c.report_code))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_B, KC_C))); keyboard_task(); - - key_b.release(); - key_c.release(); + release_key(1, 0); + release_key(0, 3); // Note that the first key released is the first one in the matrix order - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(key_c.report_code))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_C))); keyboard_task(); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); keyboard_task(); } -TEST_F(KeyPress, LeftShiftIsReportedCorrectly) { +TEST_F(KeyPress, ANonMappedKeyDoesNothing) { TestDriver driver; - auto key_a = KeymapKey(0, 0, 0, KC_A); - auto key_lsft = KeymapKey(0, 3, 0, KC_LEFT_SHIFT); - - set_keymap({key_a, key_lsft}); - - key_lsft.press(); - key_a.press(); + press_key(2, 0); + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + keyboard_task(); + keyboard_task(); +} +TEST_F(KeyPress, LeftShiftIsReportedCorrectly) { + TestDriver driver; + press_key(3, 0); + press_key(0, 0); // Unfortunately modifiers are also processed in the wrong order // See issue #1476 for more information - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(key_a.report_code))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_A))); keyboard_task(); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(key_a.report_code, key_lsft.report_code))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_A, KC_LEFT_SHIFT))); keyboard_task(); - - key_a.release(); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(key_lsft.report_code))); + release_key(0, 0); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); keyboard_task(); - - key_lsft.release(); + release_key(3, 0); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); keyboard_task(); } TEST_F(KeyPress, PressLeftShiftAndControl) { TestDriver driver; - auto key_lsft = KeymapKey(0, 3, 0, KC_LEFT_SHIFT); - auto key_lctrl = KeymapKey(0, 5, 0, KC_LEFT_CTRL); - - set_keymap({key_lctrl, key_lsft}); - - key_lsft.press(); - key_lctrl.press(); - + press_key(3, 0); + press_key(5, 0); // Unfortunately modifiers are also processed in the wrong order // See issue #1476 for more information - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(key_lsft.report_code))); - keyboard_task(); - - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(key_lsft.report_code, key_lctrl.report_code))); - keyboard_task(); - - key_lsft.release(); - key_lctrl.release(); - - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(key_lctrl.report_code))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); keyboard_task(); - - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT, KC_LEFT_CTRL))); keyboard_task(); } TEST_F(KeyPress, LeftAndRightShiftCanBePressedAtTheSameTime) { TestDriver driver; - auto key_lsft = KeymapKey(0, 3, 0, KC_LEFT_SHIFT); - auto key_rsft = KeymapKey(0, 4, 0, KC_RIGHT_SHIFT); - - set_keymap({key_rsft, key_lsft}); - - key_lsft.press(); - key_rsft.press(); + press_key(3, 0); + press_key(4, 0); // Unfortunately modifiers are also processed in the wrong order // See issue #1476 for more information - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(key_lsft.report_code))); - keyboard_task(); - - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(key_lsft.report_code, key_rsft.report_code))); - keyboard_task(); - - key_lsft.release(); - key_rsft.release(); - - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(key_rsft.report_code))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); keyboard_task(); - - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT, KC_RIGHT_SHIFT))); keyboard_task(); } TEST_F(KeyPress, RightShiftLeftControlAndCharWithTheSameKey) { TestDriver driver; - auto combo_key = KeymapKey(0, 0, 0, RSFT(LCTL(KC_O))); - - set_keymap({combo_key}); - + press_key(6, 0); // BUG: The press is split into two reports // BUG: It reports RSFT instead of LSFT // See issue #524 for more information // The underlying cause is that we use only one bit to represent the right hand // modifiers. - combo_key.press(); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RIGHT_SHIFT, KC_RIGHT_CTRL))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RIGHT_SHIFT, KC_RIGHT_CTRL, KC_O))); keyboard_task(); - - combo_key.release(); + release_key(6, 0); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RIGHT_SHIFT, KC_RIGHT_CTRL))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); keyboard_task(); @@ -188,29 +127,25 @@ TEST_F(KeyPress, RightShiftLeftControlAndCharWithTheSameKey) { TEST_F(KeyPress, PressPlusEqualReleaseBeforePress) { TestDriver driver; InSequence s; - auto key_plus = KeymapKey(0, 1, 1, KC_PLUS); - auto key_eql = KeymapKey(0, 0, 1, KC_EQL); - - set_keymap({key_plus, key_eql}); - key_plus.press(); + press_key(1, 1); // KC_PLUS EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT, KC_EQUAL))); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - key_plus.release(); + release_key(1, 1); // KC_PLUS EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - key_eql.press(); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(key_eql.report_code))); + press_key(0, 1); // KC_EQUAL + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_EQUAL))); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - key_eql.release(); + release_key(0, 1); // KC_EQUAL EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); @@ -219,31 +154,27 @@ TEST_F(KeyPress, PressPlusEqualReleaseBeforePress) { TEST_F(KeyPress, PressPlusEqualDontReleaseBeforePress) { TestDriver driver; InSequence s; - auto key_plus = KeymapKey(0, 1, 1, KC_PLUS); - auto key_eql = KeymapKey(0, 0, 1, KC_EQUAL); - - set_keymap({key_plus, key_eql}); - key_plus.press(); + press_key(1, 1); // KC_PLUS EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT, KC_EQUAL))); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - key_eql.press(); + press_key(0, 1); // KC_EQUAL EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_EQUAL))); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - key_plus.release(); + release_key(1, 1); // KC_PLUS // BUG: Should really still return KC_EQUAL, but this is fine too // It's also called twice for some reason EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(2); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - key_eql.release(); + release_key(0, 1); // KC_EQUAL EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); @@ -252,28 +183,24 @@ TEST_F(KeyPress, PressPlusEqualDontReleaseBeforePress) { TEST_F(KeyPress, PressEqualPlusReleaseBeforePress) { TestDriver driver; InSequence s; - auto key_plus = KeymapKey(0, 1, 1, KC_PLUS); - auto key_eql = KeymapKey(0, 0, 1, KC_EQUAL); - set_keymap({key_plus, key_eql}); - - key_eql.press(); + press_key(0, 1); // KC_EQUAL EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_EQUAL))); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - key_eql.release(); + release_key(0, 1); // KC_EQUAL EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - key_plus.press(); + press_key(1, 1); // KC_PLUS EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT, KC_EQUAL))); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - key_plus.release(); + release_key(1, 1); // KC_PLUS EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); run_one_scan_loop(); @@ -283,17 +210,13 @@ TEST_F(KeyPress, PressEqualPlusReleaseBeforePress) { TEST_F(KeyPress, PressEqualPlusDontReleaseBeforePress) { TestDriver driver; InSequence s; - auto key_plus = KeymapKey(0, 1, 1, KC_PLUS); - auto key_eql = KeymapKey(0, 0, 1, KC_EQL); - - set_keymap({key_plus, key_eql}); - key_eql.press(); + press_key(0, 1); // KC_EQUAL EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_EQUAL))); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - key_plus.press(); + press_key(1, 1); // KC_PLUS // BUG: The sequence is a bit strange, but it works, the end result is that // KC_PLUS is sent EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT, KC_EQUAL))); @@ -302,16 +225,16 @@ TEST_F(KeyPress, PressEqualPlusDontReleaseBeforePress) { run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - key_eql.release(); + release_key(0, 1); // KC_EQUAL // I guess it's fine to still report shift here EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - key_plus.release(); + release_key(1, 1); // KC_PLUS // This report is not needed EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); -} \ No newline at end of file +} diff --git a/tests/basic/test_macro.cpp b/tests/basic/test_macro.cpp index ae2f3b32e3..1ac6f473fc 100644 --- a/tests/basic/test_macro.cpp +++ b/tests/basic/test_macro.cpp @@ -24,25 +24,10 @@ class Macro : public TestFixture {}; #define AT_TIME(t) WillOnce(InvokeWithoutArgs([current_time]() { EXPECT_EQ(timer_elapsed32(current_time), t); })) -extern "C" const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - if (record->event.pressed) { - switch (id) { - case 0: - return MACRO(D(LSFT), T(H), U(LSFT), T(E), T(L), T(L), T(O), T(SPACE), W(100), D(LSFT), T(W), U(LSFT), I(10), T(O), T(R), T(L), T(D), D(LSFT), T(1), U(LSFT), END); - } - } - return MACRO_NONE; -}; - TEST_F(Macro, PlayASimpleMacro) { TestDriver driver; InSequence s; - auto key_macro = KeymapKey(0, 8, 0, M(0)); - - set_keymap({key_macro}); - - key_macro.press(); - + press_key(8, 0); uint32_t current_time = timer_read32(); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))).AT_TIME(0); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT, KC_H))).AT_TIME(0); @@ -83,6 +68,4 @@ TEST_F(Macro, PlayASimpleMacro) { EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))).AT_TIME(210); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).AT_TIME(220); run_one_scan_loop(); - - key_macro.release(); } diff --git a/tests/basic/test_one_shot_keys.cpp b/tests/basic/test_one_shot_keys.cpp deleted file mode 100644 index 98178912e4..0000000000 --- a/tests/basic/test_one_shot_keys.cpp +++ /dev/null @@ -1,197 +0,0 @@ -/* Copyright 2021 Stefan Kerkmann - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "action_util.h" -#include "keyboard_report_util.hpp" -#include "test_common.hpp" - -using testing::_; -using testing::InSequence; - -class OneShot : public TestFixture {}; -class OneShotParametrizedTestFixture : public ::testing::WithParamInterface<std::pair<KeymapKey, KeymapKey>>, public OneShot {}; - -TEST_F(OneShot, OSMWithoutAdditionalKeypressDoesNothing) { - TestDriver driver; - auto osm_key = KeymapKey(0, 0, 0, OSM(MOD_LSFT), KC_LSFT); - - set_keymap({osm_key}); - - /* Press and release OSM key*/ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - osm_key.press(); - run_one_scan_loop(); - osm_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* OSM are added when an actual report is send */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(osm_key.report_code))); - send_keyboard_report(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Make unit-test pass */ - clear_oneshot_mods(); -} - -#if defined(ONESHOT_TIMEOUT) - -TEST_P(OneShotParametrizedTestFixture, OSMExpiredDoesNothing) { - TestDriver driver; - KeymapKey osm_key = GetParam().first; - KeymapKey regular_key = GetParam().second; - - set_keymap({osm_key, regular_key}); - - /* Press and release OSM */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - osm_key.press(); - run_one_scan_loop(); - osm_key.release(); - idle_for(ONESHOT_TIMEOUT); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Press regular key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(regular_key.report_code))).Times(1); - regular_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release regular key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - regular_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); -} - -#endif - -TEST_P(OneShotParametrizedTestFixture, OSMWithAdditionalKeypress) { - TestDriver driver; - KeymapKey osm_key = GetParam().first; - KeymapKey regular_key = GetParam().second; - - set_keymap({osm_key, regular_key}); - - /* Press and release OSM */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - osm_key.press(); - run_one_scan_loop(); - osm_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Press regular key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(osm_key.report_code, regular_key.report_code))).Times(1); - regular_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release regular key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - regular_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); -} - -TEST_P(OneShotParametrizedTestFixture, OSMAsRegularModifierWithAdditionalKeypress) { - TestDriver driver; - testing::InSequence s; - - KeymapKey osm_key = GetParam().first; - KeymapKey regular_key = GetParam().second; - - set_keymap({osm_key, regular_key}); - - /* Press OSM */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - osm_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Press regular key */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - regular_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release regular key */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - regular_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release OSM */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(regular_key.report_code, osm_key.report_code))).Times(1); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); - osm_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); -} - -// clang-format off - -INSTANTIATE_TEST_CASE_P( - OneShotModifierTests, - OneShotParametrizedTestFixture, - ::testing::Values( - /* first is osm key, second is regular key. */ - std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_LSFT), KC_LSFT}, KeymapKey{0, 1, 1, KC_A}), - std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_LCTL), KC_LCTL}, KeymapKey{0, 1, 1, KC_A}), - std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_LALT), KC_LALT}, KeymapKey{0, 1, 1, KC_A}), - std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_LGUI), KC_LGUI}, KeymapKey{0, 1, 1, KC_A}), - std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_RCTL), KC_RCTL}, KeymapKey{0, 1, 1, KC_A}), - std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_RSFT), KC_RSFT}, KeymapKey{0, 1, 1, KC_A}), - std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_RALT), KC_RALT}, KeymapKey{0, 1, 1, KC_A}), - std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_RGUI), KC_RGUI}, KeymapKey{0, 1, 1, KC_A}) - )); -// clang-format on - -TEST_F(OneShot, OSLWithAdditionalKeypress) { - TestDriver driver; - InSequence s; - KeymapKey osl_key = KeymapKey{0, 0, 0, OSL(1)}; - KeymapKey regular_key = KeymapKey{1, 1, 0, KC_A}; - - set_keymap({osl_key, regular_key}); - - /* Press OSL key */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - osl_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release OSL key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(2); - osl_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Press regular key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(regular_key.report_code))).Times(2); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - regular_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release regular key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - regular_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); -} diff --git a/tests/basic/test_tapping.cpp b/tests/basic/test_tapping.cpp index 181b7ca89e..88ab97eb6e 100644 --- a/tests/basic/test_tapping.cpp +++ b/tests/basic/test_tapping.cpp @@ -14,11 +14,8 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include "keyboard_report_util.hpp" -#include "keycode.h" #include "test_common.hpp" #include "action_tapping.h" -#include "test_keymap_key.hpp" using testing::_; using testing::InSequence; @@ -28,19 +25,14 @@ class Tapping : public TestFixture {}; TEST_F(Tapping, TapA_SHFT_T_KeyReportsKey) { TestDriver driver; InSequence s; - auto key_shift_hold_p_tap = KeymapKey(0, 7, 0, SFT_T(KC_P)); - - set_keymap({key_shift_hold_p_tap}); + press_key(7, 0); // Tapping keys does nothing on press - key_shift_hold_p_tap.press(); EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); run_one_scan_loop(); - + release_key(7, 0); // First we get the key press - key_shift_hold_p_tap.release(); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); - // Then the release EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); run_one_scan_loop(); @@ -49,38 +41,25 @@ TEST_F(Tapping, TapA_SHFT_T_KeyReportsKey) { TEST_F(Tapping, HoldA_SHFT_T_KeyReportsShift) { TestDriver driver; InSequence s; - auto mod_tap_hold_key = KeymapKey(0, 7, 0, SFT_T(KC_P)); - - set_keymap({mod_tap_hold_key}); - - mod_tap_hold_key.press(); + press_key(7, 0); // Tapping keys does nothing on press EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); idle_for(TAPPING_TERM); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); run_one_scan_loop(); - - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - mod_tap_hold_key.release(); - run_one_scan_loop(); } TEST_F(Tapping, ANewTapWithinTappingTermIsBuggy) { // See issue #1478 for more information TestDriver driver; InSequence s; - auto key_shift_hold_p_tap = KeymapKey(0, 7, 0, SFT_T(KC_P)); - - set_keymap({key_shift_hold_p_tap}); + press_key(7, 0); // Tapping keys does nothing on press - key_shift_hold_p_tap.press(); EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); run_one_scan_loop(); - key_shift_hold_p_tap.release(); - + release_key(7, 0); // First we get the key press EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); // Then the release @@ -88,20 +67,19 @@ TEST_F(Tapping, ANewTapWithinTappingTermIsBuggy) { run_one_scan_loop(); // This sends KC_P, even if it should do nothing - key_shift_hold_p_tap.press(); + press_key(7, 0); // This test should not succed if everything works correctly EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); run_one_scan_loop(); - - key_shift_hold_p_tap.release(); + release_key(7, 0); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); idle_for(TAPPING_TERM + 1); // On the other hand, nothing is sent if we are outside the tapping term - key_shift_hold_p_tap.press(); + press_key(7, 0); EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); run_one_scan_loop(); - key_shift_hold_p_tap.release(); + release_key(7, 0); // First we get the key press EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); @@ -112,12 +90,8 @@ TEST_F(Tapping, ANewTapWithinTappingTermIsBuggy) { // Now we are geting into strange territory, as the hold registers too early here // But the stranges part is: // If TAPPING_TERM + 1 above is changed to TAPPING_TERM or TAPPING_TERM + 2 it doesn't - key_shift_hold_p_tap.press(); + press_key(7, 0); // Shouldn't be called here really EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))).Times(1); idle_for(TAPPING_TERM); - - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - key_shift_hold_p_tap.release(); - run_one_scan_loop(); -} \ No newline at end of file +} diff --git a/tests/tap_hold_configurations/default_mod_tap/config.h b/tests/tap_hold_configurations/default_mod_tap/config.h deleted file mode 100644 index 5955b8600a..0000000000 --- a/tests/tap_hold_configurations/default_mod_tap/config.h +++ /dev/null @@ -1,21 +0,0 @@ -/* Copyright 2021 Stefan Kerkmann - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#include "test_common.h" - -#define IGNORE_MOD_TAP_INTERRUPT \ No newline at end of file diff --git a/tests/tap_hold_configurations/default_mod_tap/test.mk b/tests/tap_hold_configurations/default_mod_tap/test.mk deleted file mode 100644 index cfab996e0e..0000000000 --- a/tests/tap_hold_configurations/default_mod_tap/test.mk +++ /dev/null @@ -1,18 +0,0 @@ -# Copyright 2021 Stefan Kerkmann -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. - -# -------------------------------------------------------------------------------- -# Keep this file, even if it is empty, as a marker that this folder contains tests -# -------------------------------------------------------------------------------- \ No newline at end of file diff --git a/tests/tap_hold_configurations/default_mod_tap/test_tap_hold.cpp b/tests/tap_hold_configurations/default_mod_tap/test_tap_hold.cpp deleted file mode 100644 index 90befcdffd..0000000000 --- a/tests/tap_hold_configurations/default_mod_tap/test_tap_hold.cpp +++ /dev/null @@ -1,230 +0,0 @@ -/* Copyright 2021 Stefan Kerkmann - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "keyboard_report_util.hpp" -#include "keycode.h" -#include "test_common.hpp" -#include "action_tapping.h" -#include "test_fixture.hpp" -#include "test_keymap_key.hpp" - -using testing::_; -using testing::InSequence; - -class DefaultTapHold : public TestFixture {}; - -TEST_F(DefaultTapHold, tap_regular_key_while_mod_tap_key_is_held) { - TestDriver driver; - InSequence s; - auto mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); - auto regular_key = KeymapKey(0, 2, 0, KC_A); - - set_keymap({mod_tap_hold_key, regular_key}); - - /* Press mod-tap-hold key. */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - mod_tap_hold_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Press regular key. */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - regular_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release regular key. */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - regular_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release mod-tap-hold key. */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P, KC_A))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - mod_tap_hold_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Idle for tapping term of mod tap hold key. */ - idle_for(TAPPING_TERM - 3); - testing::Mock::VerifyAndClearExpectations(&driver); -} - -TEST_F(DefaultTapHold, tap_mod_tap_key_while_mod_tap_key_is_held) { - TestDriver driver; - InSequence s; - auto first_mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); - auto second_mod_tap_hold_key = KeymapKey(0, 2, 0, RSFT_T(KC_A)); - - set_keymap({first_mod_tap_hold_key, second_mod_tap_hold_key}); - - /* Press first mod-tap-hold key */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - first_mod_tap_hold_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Press second tap-hold key */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - second_mod_tap_hold_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release second tap-hold key */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - second_mod_tap_hold_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release first mod-tap-hold key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P, KC_A))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - first_mod_tap_hold_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); -} - -TEST_F(DefaultTapHold, tap_regular_key_while_layer_tap_key_is_held) { - TestDriver driver; - InSequence s; - auto layer_tap_hold_key = KeymapKey(0, 1, 0, LT(1, KC_P)); - auto regular_key = KeymapKey(0, 2, 0, KC_A); - auto layer_key = KeymapKey(1, 2, 0, KC_B); - - set_keymap({layer_tap_hold_key, regular_key, layer_key}); - - /* Press layer-tap-hold key */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - layer_tap_hold_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Press regular key */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - regular_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release regular key */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - regular_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release layer-tap-hold key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_A, KC_P))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); - EXPECT_CALL(driver, send_keyboard_mock(_)); - layer_tap_hold_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); -} - -TEST_F(DefaultTapHold, tap_mod_tap_hold_key_two_times) { - GTEST_SKIP() << "TODO:Holding a modtap key results in out of bounds access to the keymap, this is a bug in QMK."; - - TestDriver driver; - InSequence s; - auto mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); - - set_keymap({mod_tap_hold_key}); - - /* Press mod-tap-hold key. */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - mod_tap_hold_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release mod-tap-hold key. */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - mod_tap_hold_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Press mod-tap-hold key again. */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); - mod_tap_hold_key.press(); - idle_for(TAPPING_TERM); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release mod-tap-hold key. */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - mod_tap_hold_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); -} - -TEST_F(DefaultTapHold, tap_mod_tap_hold_key_twice_and_hold_on_second_time) { - GTEST_SKIP() << "TODO:Holding a modtap key results in out of bounds access to the keymap, this is a bug in QMK."; - - TestDriver driver; - InSequence s; - auto mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); - - set_keymap({mod_tap_hold_key}); - - /* Press mod-tap-hold key. */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - mod_tap_hold_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release mod-tap-hold key. */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - mod_tap_hold_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Press mod-tap-hold key again. */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); - mod_tap_hold_key.press(); - idle_for(TAPPING_TERM); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release mod-tap-hold key. */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - mod_tap_hold_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); -} - -TEST_F(DefaultTapHold, tap_and_hold_mod_tap_hold_key) { - TestDriver driver; - InSequence s; - auto mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); - - set_keymap({mod_tap_hold_key}); - - /* Press mod-tap-hold key. */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSHIFT))); - mod_tap_hold_key.press(); - idle_for(TAPPING_TERM + 1); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release mod-tap-hold key. */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - mod_tap_hold_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); -} \ No newline at end of file diff --git a/tests/tap_hold_configurations/ignore_mod_tap_interrupt/config.h b/tests/tap_hold_configurations/ignore_mod_tap_interrupt/config.h deleted file mode 100644 index 5955b8600a..0000000000 --- a/tests/tap_hold_configurations/ignore_mod_tap_interrupt/config.h +++ /dev/null @@ -1,21 +0,0 @@ -/* Copyright 2021 Stefan Kerkmann - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#include "test_common.h" - -#define IGNORE_MOD_TAP_INTERRUPT \ No newline at end of file diff --git a/tests/tap_hold_configurations/ignore_mod_tap_interrupt/test.mk b/tests/tap_hold_configurations/ignore_mod_tap_interrupt/test.mk deleted file mode 100644 index efecca2c22..0000000000 --- a/tests/tap_hold_configurations/ignore_mod_tap_interrupt/test.mk +++ /dev/null @@ -1,18 +0,0 @@ -# Copyright 2021 Stefan Kerkmann -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. - -# -------------------------------------------------------------------------------- -# Keep this file, even if it is empty, as a marker that this folder contains tests -# -------------------------------------------------------------------------------- diff --git a/tests/tap_hold_configurations/ignore_mod_tap_interrupt/test_tap_hold.cpp b/tests/tap_hold_configurations/ignore_mod_tap_interrupt/test_tap_hold.cpp deleted file mode 100644 index 1702d604d3..0000000000 --- a/tests/tap_hold_configurations/ignore_mod_tap_interrupt/test_tap_hold.cpp +++ /dev/null @@ -1,136 +0,0 @@ -/* Copyright 2021 Stefan Kerkmann - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "keyboard_report_util.hpp" -#include "keycode.h" -#include "test_common.hpp" -#include "action_tapping.h" -#include "test_fixture.hpp" -#include "test_keymap_key.hpp" - -using testing::_; -using testing::InSequence; - -class IgnoreModTapInterrupt : public TestFixture {}; - -TEST_F(IgnoreModTapInterrupt, tap_regular_key_while_mod_tap_key_is_held) { - TestDriver driver; - InSequence s; - auto mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); - auto regular_key = KeymapKey(0, 2, 0, KC_A); - - set_keymap({mod_tap_hold_key, regular_key}); - - /* Press mod-tap-hold key */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - mod_tap_hold_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Press regular key */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - regular_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release regular key */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - regular_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release mod-tap-hold key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_A, KC_P))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - mod_tap_hold_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); -} - -TEST_F(IgnoreModTapInterrupt, tap_mod_tap_key_while_mod_tap_key_is_held) { - TestDriver driver; - InSequence s; - auto first_mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); - auto second_mod_tap_hold_key = KeymapKey(0, 2, 0, RSFT_T(KC_A)); - - set_keymap({first_mod_tap_hold_key, second_mod_tap_hold_key}); - - /* Press first mod-tap-hold key */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - first_mod_tap_hold_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Press second tap-hold key */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - second_mod_tap_hold_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release second tap-hold key */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - second_mod_tap_hold_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release first mod-tap-hold key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_A, KC_P))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - first_mod_tap_hold_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); -} - -TEST_F(IgnoreModTapInterrupt, tap_regular_key_while_layer_tap_key_is_held) { - TestDriver driver; - InSequence s; - auto layer_tap_hold_key = KeymapKey(0, 1, 0, LT(1, KC_P)); - auto regular_key = KeymapKey(0, 2, 0, KC_A); - auto layer_key = KeymapKey(1, 2, 0, KC_B); - - set_keymap({layer_tap_hold_key, regular_key, layer_key}); - - /* Press layer-tap-hold key */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - layer_tap_hold_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Press regular key */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - regular_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release regular key */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - regular_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release layer-tap-hold key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P, regular_key.report_code))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - layer_tap_hold_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); -} diff --git a/tests/tap_hold_configurations/permissive_hold/config.h b/tests/tap_hold_configurations/permissive_hold/config.h deleted file mode 100644 index 2d5a9849e7..0000000000 --- a/tests/tap_hold_configurations/permissive_hold/config.h +++ /dev/null @@ -1,21 +0,0 @@ -/* Copyright 2021 Stefan Kerkmann - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#include "test_common.h" - -#define PERMISSIVE_HOLD \ No newline at end of file diff --git a/tests/tap_hold_configurations/permissive_hold/test.mk b/tests/tap_hold_configurations/permissive_hold/test.mk deleted file mode 100644 index efecca2c22..0000000000 --- a/tests/tap_hold_configurations/permissive_hold/test.mk +++ /dev/null @@ -1,18 +0,0 @@ -# Copyright 2021 Stefan Kerkmann -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. - -# -------------------------------------------------------------------------------- -# Keep this file, even if it is empty, as a marker that this folder contains tests -# -------------------------------------------------------------------------------- diff --git a/tests/tap_hold_configurations/permissive_hold/test_one_shot_keys.cpp b/tests/tap_hold_configurations/permissive_hold/test_one_shot_keys.cpp deleted file mode 100644 index aa71ec397f..0000000000 --- a/tests/tap_hold_configurations/permissive_hold/test_one_shot_keys.cpp +++ /dev/null @@ -1,76 +0,0 @@ -/* Copyright 2021 Stefan Kerkmann - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "action_util.h" -#include "keyboard_report_util.hpp" -#include "test_common.hpp" - -using testing::_; -using testing::InSequence; - -class OneShot : public TestFixture {}; -class OneShotParametrizedTestFixture : public ::testing::WithParamInterface<std::pair<KeymapKey, KeymapKey>>, public OneShot {}; - -TEST_P(OneShotParametrizedTestFixture, OSMAsRegularModifierWithAdditionalKeypress) { - TestDriver driver; - KeymapKey osm_key = GetParam().first; - KeymapKey regular_key = GetParam().second; - - set_keymap({osm_key, regular_key}); - - /* Press OSM */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - osm_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Press regular key */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - regular_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release regular key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(osm_key.report_code))).Times(2); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(regular_key.report_code, osm_key.report_code))).Times(1); - regular_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release OSM */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); - osm_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); -} - -// clang-format off - -INSTANTIATE_TEST_CASE_P( - OneShotModifierTests, - OneShotParametrizedTestFixture, - ::testing::Values( - /* first is osm key, second is regular key. */ - std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_LSFT), KC_LSFT}, KeymapKey{0, 1, 1, KC_A}), - std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_LCTL), KC_LCTL}, KeymapKey{0, 1, 1, KC_A}), - std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_LALT), KC_LALT}, KeymapKey{0, 1, 1, KC_A}), - std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_LGUI), KC_LGUI}, KeymapKey{0, 1, 1, KC_A}), - std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_RCTL), KC_RCTL}, KeymapKey{0, 1, 1, KC_A}), - std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_RSFT), KC_RSFT}, KeymapKey{0, 1, 1, KC_A}), - std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_RALT), KC_RALT}, KeymapKey{0, 1, 1, KC_A}), - std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_RGUI), KC_RGUI}, KeymapKey{0, 1, 1, KC_A}) - )); -// clang-format on \ No newline at end of file diff --git a/tests/tap_hold_configurations/permissive_hold/test_tap_hold.cpp b/tests/tap_hold_configurations/permissive_hold/test_tap_hold.cpp deleted file mode 100644 index ab9dd1518b..0000000000 --- a/tests/tap_hold_configurations/permissive_hold/test_tap_hold.cpp +++ /dev/null @@ -1,132 +0,0 @@ -/* Copyright 2021 Stefan Kerkmann - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "keyboard_report_util.hpp" -#include "keycode.h" -#include "test_common.hpp" -#include "action_tapping.h" -#include "test_fixture.hpp" -#include "test_keymap_key.hpp" - -using testing::_; -using testing::InSequence; -class PermissiveHold : public TestFixture {}; - -TEST_F(PermissiveHold, tap_regular_key_while_mod_tap_key_is_held) { - TestDriver driver; - InSequence s; - auto mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); - auto regular_key = KeymapKey(0, 2, 0, KC_A); - - set_keymap({mod_tap_hold_key, regular_key}); - - /* Press mod-tap-hold key */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - mod_tap_hold_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Press regular key */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - regular_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release regular key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSHIFT))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSHIFT, regular_key.report_code))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSHIFT))); - regular_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release mod-tap-hold key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - mod_tap_hold_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); -} - -TEST_F(PermissiveHold, tap_mod_tap_key_while_mod_tap_key_is_held) { - TestDriver driver; - InSequence s; - auto first_mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); - auto second_mod_tap_hold_key = KeymapKey(0, 2, 0, RSFT_T(KC_A)); - - set_keymap({first_mod_tap_hold_key, second_mod_tap_hold_key}); - - /* Press first mod-tap-hold key */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - first_mod_tap_hold_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Press second mod-tap-hold key */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - second_mod_tap_hold_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release second mod-tap-hold key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSHIFT))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSHIFT, second_mod_tap_hold_key.report_code))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSHIFT))); - second_mod_tap_hold_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release first mod-tap-hold key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - first_mod_tap_hold_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); -} - -TEST_F(PermissiveHold, tap_regular_key_while_layer_tap_key_is_held) { - TestDriver driver; - InSequence s; - auto layer_tap_hold_key = KeymapKey(0, 1, 0, LT(1, KC_P)); - auto regular_key = KeymapKey(0, 2, 0, KC_A); - auto layer_key = KeymapKey(1, 2, 0, KC_B); - - set_keymap({layer_tap_hold_key, regular_key, layer_key}); - - /* Press layer-tap-hold key */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - layer_tap_hold_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Press regular key */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - regular_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release regular key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(layer_key.report_code))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - regular_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release layer-tap-hold key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - layer_tap_hold_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); -} \ No newline at end of file diff --git a/tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/config.h b/tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/config.h deleted file mode 100644 index a6abd50bbe..0000000000 --- a/tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/config.h +++ /dev/null @@ -1,22 +0,0 @@ -/* Copyright 2021 Stefan Kerkmann - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#include "test_common.h" - -#define IGNORE_MOD_TAP_INTERRUPT -#define PERMISSIVE_HOLD \ No newline at end of file diff --git a/tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/test.mk b/tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/test.mk deleted file mode 100644 index efecca2c22..0000000000 --- a/tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/test.mk +++ /dev/null @@ -1,18 +0,0 @@ -# Copyright 2021 Stefan Kerkmann -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. - -# -------------------------------------------------------------------------------- -# Keep this file, even if it is empty, as a marker that this folder contains tests -# -------------------------------------------------------------------------------- diff --git a/tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/test_tap_hold.cpp b/tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/test_tap_hold.cpp deleted file mode 100644 index 67f394653f..0000000000 --- a/tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/test_tap_hold.cpp +++ /dev/null @@ -1,134 +0,0 @@ - -/* Copyright 2021 Stefan Kerkmann - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "keyboard_report_util.hpp" -#include "keycode.h" -#include "test_common.hpp" -#include "action_tapping.h" -#include "test_fixture.hpp" -#include "test_keymap_key.hpp" - -using testing::_; -using testing::InSequence; - -class PermissiveHold_IgnoreModTapInterrupt : public TestFixture {}; - -TEST_F(PermissiveHold_IgnoreModTapInterrupt, tap_regular_key_while_mod_tap_key_is_held) { - TestDriver driver; - InSequence s; - auto mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); - auto regular_key = KeymapKey(0, 2, 0, KC_A); - - set_keymap({mod_tap_hold_key, regular_key}); - - /* Press mod-tap-hold key */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - mod_tap_hold_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Press regular key */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - regular_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release regular key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_A))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); - regular_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release mod-tap-hold key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - mod_tap_hold_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); -} - -TEST_F(PermissiveHold_IgnoreModTapInterrupt, tap_mod_tap_key_while_mod_tap_key_is_held) { - TestDriver driver; - InSequence s; - auto first_mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); - auto second_mod_tap_hold_key = KeymapKey(0, 2, 0, RSFT_T(KC_A)); - - set_keymap({first_mod_tap_hold_key, second_mod_tap_hold_key}); - - /* Press first mod-tap-hold key */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - first_mod_tap_hold_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Press second tap-hold key */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - second_mod_tap_hold_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release second tap-hold key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_A))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); - second_mod_tap_hold_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release first mod-tap-hold key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - first_mod_tap_hold_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); -} - -TEST_F(PermissiveHold_IgnoreModTapInterrupt, tap_regular_key_while_layer_tap_key_is_held) { - TestDriver driver; - InSequence s; - auto layer_tap_hold_key = KeymapKey(0, 1, 0, LT(1, KC_P)); - auto regular_key = KeymapKey(0, 2, 0, KC_A); - auto layer_key = KeymapKey(1, 2, 0, KC_B); - - set_keymap({layer_tap_hold_key, regular_key, layer_key}); - - /* Press layer-tap-hold key */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - layer_tap_hold_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Press regular key */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - regular_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release regular key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_B))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - regular_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release layer-tap-hold key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - layer_tap_hold_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); -} \ No newline at end of file diff --git a/tests/tap_hold_configurations/retro_tapping/config.h b/tests/tap_hold_configurations/retro_tapping/config.h deleted file mode 100644 index 4b38f2644b..0000000000 --- a/tests/tap_hold_configurations/retro_tapping/config.h +++ /dev/null @@ -1,21 +0,0 @@ -/* Copyright 2021 Stefan Kerkmann - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#include "test_common.h" - -#define RETRO_TAPPING \ No newline at end of file diff --git a/tests/tap_hold_configurations/retro_tapping/test.mk b/tests/tap_hold_configurations/retro_tapping/test.mk deleted file mode 100644 index efecca2c22..0000000000 --- a/tests/tap_hold_configurations/retro_tapping/test.mk +++ /dev/null @@ -1,18 +0,0 @@ -# Copyright 2021 Stefan Kerkmann -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. - -# -------------------------------------------------------------------------------- -# Keep this file, even if it is empty, as a marker that this folder contains tests -# -------------------------------------------------------------------------------- diff --git a/tests/tap_hold_configurations/retro_tapping/test_tap_hold.cpp b/tests/tap_hold_configurations/retro_tapping/test_tap_hold.cpp deleted file mode 100644 index 59ae77f781..0000000000 --- a/tests/tap_hold_configurations/retro_tapping/test_tap_hold.cpp +++ /dev/null @@ -1,52 +0,0 @@ - -/* Copyright 2021 Stefan Kerkmann - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "keyboard_report_util.hpp" -#include "keycode.h" -#include "test_common.hpp" -#include "action_tapping.h" -#include "test_fixture.hpp" -#include "test_keymap_key.hpp" - -using testing::_; -using testing::InSequence; - -class RetroTapping : public TestFixture {}; - -TEST_F(RetroTapping, tap_and_hold_mod_tap_hold_key) { - TestDriver driver; - InSequence s; - auto mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); - - set_keymap({mod_tap_hold_key}); - - /* Press mod-tap-hold key. */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - mod_tap_hold_key.press(); - idle_for(TAPPING_TERM); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release mod-tap-hold key. */ - /* TODO: Why is LSHIFT send at all? */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSHIFT))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - mod_tap_hold_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); -} \ No newline at end of file diff --git a/tests/tap_hold_configurations/retro_tapping/test_tapping.cpp b/tests/tap_hold_configurations/retro_tapping/test_tapping.cpp deleted file mode 100644 index cf23df8317..0000000000 --- a/tests/tap_hold_configurations/retro_tapping/test_tapping.cpp +++ /dev/null @@ -1,112 +0,0 @@ -/* Copyright 2021 Stefan Kerkmann - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "keyboard_report_util.hpp" -#include "keycode.h" -#include "test_common.hpp" -#include "action_tapping.h" -#include "test_keymap_key.hpp" - -using testing::_; -using testing::InSequence; - -class Tapping : public TestFixture {}; - -TEST_F(Tapping, HoldA_SHFT_T_KeyReportsShift) { - TestDriver driver; - InSequence s; - auto mod_tap_hold_key = KeymapKey(0, 7, 0, SFT_T(KC_P)); - - set_keymap({mod_tap_hold_key}); - - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - mod_tap_hold_key.press(); - idle_for(TAPPING_TERM); - testing::Mock::VerifyAndClearExpectations(&driver); - - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - mod_tap_hold_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); -} - -TEST_F(Tapping, ANewTapWithinTappingTermIsBuggy) { - TestDriver driver; - InSequence s; - auto key_shift_hold_p_tap = KeymapKey(0, 7, 0, SFT_T(KC_P)); - - set_keymap({key_shift_hold_p_tap}); - - /* Press mod_tap_hold key */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - key_shift_hold_p_tap.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release mod_tap_hold key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - key_shift_hold_p_tap.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Press mod_tap_hold key again */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); - key_shift_hold_p_tap.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release mod_tap_hold key again */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - key_shift_hold_p_tap.release(); - idle_for(TAPPING_TERM + 1); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Press mod_tap_hold key again */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - key_shift_hold_p_tap.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release mod_tap_hold key again */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - key_shift_hold_p_tap.release(); - idle_for(TAPPING_TERM + 1); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Press mod_tap_hold key again */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - key_shift_hold_p_tap.press(); - idle_for(TAPPING_TERM); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release mod_tap_hold key again */ - /* TODO: Why is KC_LSFT send? */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - key_shift_hold_p_tap.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); -} \ No newline at end of file diff --git a/tests/tap_hold_configurations/tapping_force_hold/config.h b/tests/tap_hold_configurations/tapping_force_hold/config.h deleted file mode 100644 index 3b4646338a..0000000000 --- a/tests/tap_hold_configurations/tapping_force_hold/config.h +++ /dev/null @@ -1,21 +0,0 @@ -/* Copyright 2021 Stefan Kerkmann - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#include "test_common.h" - -#define TAPPING_FORCE_HOLD \ No newline at end of file diff --git a/tests/tap_hold_configurations/tapping_force_hold/test.mk b/tests/tap_hold_configurations/tapping_force_hold/test.mk deleted file mode 100644 index efecca2c22..0000000000 --- a/tests/tap_hold_configurations/tapping_force_hold/test.mk +++ /dev/null @@ -1,18 +0,0 @@ -# Copyright 2021 Stefan Kerkmann -# -# This program is free software: you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation, either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program. If not, see <http://www.gnu.org/licenses/>. - -# -------------------------------------------------------------------------------- -# Keep this file, even if it is empty, as a marker that this folder contains tests -# -------------------------------------------------------------------------------- diff --git a/tests/tap_hold_configurations/tapping_force_hold/test_action_layer.cpp b/tests/tap_hold_configurations/tapping_force_hold/test_action_layer.cpp deleted file mode 100644 index 02416eed73..0000000000 --- a/tests/tap_hold_configurations/tapping_force_hold/test_action_layer.cpp +++ /dev/null @@ -1,81 +0,0 @@ -/* Copyright 2021 Stefan Kerkmann - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "keyboard_report_util.hpp" -#include "test_common.hpp" - -using testing::_; -using testing::InSequence; - -class ActionLayer : public TestFixture {}; - -TEST_F(ActionLayer, LayerTapToggleWithToggleWithKeypress) { - TestDriver driver; - KeymapKey layer_key = KeymapKey{0, 0, 0, TT(1)}; - - /* These keys must have the same position in the matrix, only the layer is different. */ - KeymapKey regular_key = KeymapKey{0, 1, 0, KC_A}; - set_keymap({layer_key, regular_key, KeymapKey{1, 1, 0, KC_B}}); - - /* Tap TT five times . */ - /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ - /* TODO: Tapping Force Hold breaks TT */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(10); - - layer_key.press(); - run_one_scan_loop(); - layer_key.release(); - run_one_scan_loop(); - expect_layer_state(0); - - layer_key.press(); - run_one_scan_loop(); - layer_key.release(); - run_one_scan_loop(); - expect_layer_state(0); - - layer_key.press(); - run_one_scan_loop(); - layer_key.release(); - run_one_scan_loop(); - expect_layer_state(0); - - layer_key.press(); - run_one_scan_loop(); - layer_key.release(); - run_one_scan_loop(); - expect_layer_state(0); - - layer_key.press(); - run_one_scan_loop(); - layer_key.release(); - run_one_scan_loop(); - expect_layer_state(0); - - testing::Mock::VerifyAndClearExpectations(&driver); - - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_A))).Times(1); - regular_key.press(); - run_one_scan_loop(); - expect_layer_state(0); - testing::Mock::VerifyAndClearExpectations(&driver); - - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); - regular_key.release(); - run_one_scan_loop(); - expect_layer_state(0); - testing::Mock::VerifyAndClearExpectations(&driver); -} \ No newline at end of file diff --git a/tests/tap_hold_configurations/tapping_force_hold/test_tap_hold.cpp b/tests/tap_hold_configurations/tapping_force_hold/test_tap_hold.cpp deleted file mode 100644 index cb68429617..0000000000 --- a/tests/tap_hold_configurations/tapping_force_hold/test_tap_hold.cpp +++ /dev/null @@ -1,215 +0,0 @@ - -/* Copyright 2021 Stefan Kerkmann - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "keyboard_report_util.hpp" -#include "keycode.h" -#include "test_common.hpp" -#include "action_tapping.h" -#include "test_fixture.hpp" -#include "test_keymap_key.hpp" - -using testing::_; -using testing::InSequence; - -class TappingForceHold : public TestFixture {}; - -TEST_F(TappingForceHold, tap_regular_key_while_mod_tap_key_is_held) { - TestDriver driver; - InSequence s; - auto mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); - auto regular_key = KeymapKey(0, 2, 0, KC_A); - - set_keymap({mod_tap_hold_key, regular_key}); - - /* Press mod-tap-hold key. */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - mod_tap_hold_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Press regular key. */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - regular_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release regular key. */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - regular_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release mod-tap-hold key. */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); - mod_tap_hold_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Idle for tapping term of mod tap hold key. */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_A))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - idle_for(TAPPING_TERM - 3); - testing::Mock::VerifyAndClearExpectations(&driver); -} - -TEST_F(TappingForceHold, tap_mod_tap_key_while_mod_tap_key_is_held) { - TestDriver driver; - InSequence s; - auto first_mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); - auto second_mod_tap_hold_key = KeymapKey(0, 2, 0, RSFT_T(KC_A)); - - set_keymap({first_mod_tap_hold_key, second_mod_tap_hold_key}); - - /* Press first mod-tap-hold key */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - first_mod_tap_hold_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Press second tap-hold key */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - second_mod_tap_hold_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release second tap-hold key */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - second_mod_tap_hold_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release first mod-tap-hold key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); - first_mod_tap_hold_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Idle for tapping term of first mod tap hold key. */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_A))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - idle_for(TAPPING_TERM - 3); - testing::Mock::VerifyAndClearExpectations(&driver); -} - -TEST_F(TappingForceHold, tap_regular_key_while_layer_tap_key_is_held) { - TestDriver driver; - InSequence s; - auto layer_tap_hold_key = KeymapKey(0, 1, 0, LT(1, KC_P)); - auto regular_key = KeymapKey(0, 2, 0, KC_A); - auto layer_key = KeymapKey(1, 2, 0, KC_B); - - set_keymap({layer_tap_hold_key, regular_key, layer_key}); - - /* Press layer-tap-hold key */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - layer_tap_hold_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Press regular key */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - regular_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release regular key */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - regular_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release layer-tap-hold key */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_A, KC_P))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); - EXPECT_CALL(driver, send_keyboard_mock(_)); - layer_tap_hold_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); -} - -TEST_F(TappingForceHold, tap_mod_tap_hold_key_two_times) { - TestDriver driver; - InSequence s; - auto mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); - - set_keymap({mod_tap_hold_key}); - - /* Press mod-tap-hold key. */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - mod_tap_hold_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release mod-tap-hold key. */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - mod_tap_hold_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Press mod-tap-hold key again. */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - mod_tap_hold_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release mod-tap-hold key. */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - mod_tap_hold_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); -} - -TEST_F(TappingForceHold, tap_mod_tap_hold_key_twice_and_hold_on_second_time) { - TestDriver driver; - InSequence s; - auto mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); - - set_keymap({mod_tap_hold_key}); - - /* Press mod-tap-hold key. */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - mod_tap_hold_key.press(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release mod-tap-hold key. */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - mod_tap_hold_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Press mod-tap-hold key again. */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - mod_tap_hold_key.press(); - idle_for(TAPPING_TERM); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Release mod-tap-hold key. */ - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSHIFT))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); - mod_tap_hold_key.release(); - run_one_scan_loop(); - testing::Mock::VerifyAndClearExpectations(&driver); -} diff --git a/tests/test_common/keyboard_report_util.cpp b/tests/test_common/keyboard_report_util.cpp index e148c76beb..f73cf239e0 100644 --- a/tests/test_common/keyboard_report_util.cpp +++ b/tests/test_common/keyboard_report_util.cpp @@ -44,21 +44,16 @@ bool operator==(const report_keyboard_t& lhs, const report_keyboard_t& rhs) { return lhs.mods == rhs.mods && lhskeys == rhskeys; } -std::ostream& operator<<(std::ostream& stream, const report_keyboard_t& report) { - auto keys = get_keys(report); - +std::ostream& operator<<(std::ostream& stream, const report_keyboard_t& value) { + stream << "Keyboard report:" << std::endl; + stream << "Mods: " << (uint32_t)value.mods << std::endl; + stream << "Keys: "; // TODO: This should probably print friendly names for the keys - stream << "Keyboard Report: Mods (" << (uint32_t)report.mods << ") Keys ("; - - for (auto key = keys.cbegin(); key != keys.cend();) { - stream << +(*key); - key++; - if (key != keys.cend()) { - stream << ","; - } + for (uint32_t k : get_keys(value)) { + stream << k << " "; } - - return stream << ")" << std::endl; + stream << std::endl; + return stream; } KeyboardReportMatcher::KeyboardReportMatcher(const std::vector<uint8_t>& keys) { diff --git a/tests/test_common/keymap.c b/tests/test_common/keymap.c deleted file mode 100644 index fc3a56a007..0000000000 --- a/tests/test_common/keymap.c +++ /dev/null @@ -1,33 +0,0 @@ -/* Copyright 2017 Fred Sundvik - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "quantum.h" - -// clang-format off - -const uint16_t PROGMEM - keymaps[][MATRIX_ROWS][MATRIX_COLS] = - { - [0] = - { - {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO}, - {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO}, - {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO}, - {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO}, - }, -}; - -// clang-format on diff --git a/tests/test_common/test_common.h b/tests/test_common/test_common.h deleted file mode 100644 index 19ffcddcea..0000000000 --- a/tests/test_common/test_common.h +++ /dev/null @@ -1,4 +0,0 @@ -#pragma once - -#define MATRIX_ROWS 4 -#define MATRIX_COLS 10 \ No newline at end of file diff --git a/tests/test_common/test_driver.cpp b/tests/test_common/test_driver.cpp index 2fa2b6a2e7..84e249d838 100644 --- a/tests/test_common/test_driver.cpp +++ b/tests/test_common/test_driver.cpp @@ -27,10 +27,7 @@ TestDriver::~TestDriver() { m_this = nullptr; } uint8_t TestDriver::keyboard_leds(void) { return m_this->m_leds; } -void TestDriver::send_keyboard(report_keyboard_t* report) { - test_logger.trace() << *report; - m_this->send_keyboard_mock(*report); -} +void TestDriver::send_keyboard(report_keyboard_t* report) { m_this->send_keyboard_mock(*report); } void TestDriver::send_mouse(report_mouse_t* report) { m_this->send_mouse_mock(*report); } diff --git a/tests/test_common/test_driver.hpp b/tests/test_common/test_driver.hpp index f9197b3634..f86308df95 100644 --- a/tests/test_common/test_driver.hpp +++ b/tests/test_common/test_driver.hpp @@ -20,26 +20,25 @@ #include <stdint.h> #include "host.h" #include "keyboard_report_util.hpp" -#include "test_logger.hpp" + class TestDriver { - public: +public: TestDriver(); ~TestDriver(); void set_leds(uint8_t leds) { m_leds = leds; } - MOCK_METHOD1(send_keyboard_mock, void(report_keyboard_t&)); - MOCK_METHOD1(send_mouse_mock, void(report_mouse_t&)); - MOCK_METHOD1(send_system_mock, void(uint16_t)); - MOCK_METHOD1(send_consumer_mock, void(uint16_t)); - - private: - static uint8_t keyboard_leds(void); - static void send_keyboard(report_keyboard_t* report); - static void send_mouse(report_mouse_t* report); - static void send_system(uint16_t data); - static void send_consumer(uint16_t data); - host_driver_t m_driver; - uint8_t m_leds = 0; + MOCK_METHOD1(send_keyboard_mock, void (report_keyboard_t&)); + MOCK_METHOD1(send_mouse_mock, void (report_mouse_t&)); + MOCK_METHOD1(send_system_mock, void (uint16_t)); + MOCK_METHOD1(send_consumer_mock, void (uint16_t)); +private: + static uint8_t keyboard_leds(void); + static void send_keyboard(report_keyboard_t *report); + static void send_mouse(report_mouse_t* report); + static void send_system(uint16_t data); + static void send_consumer(uint16_t data); + host_driver_t m_driver; + uint8_t m_leds = 0; static TestDriver* m_this; }; diff --git a/tests/test_common/test_fixture.cpp b/tests/test_common/test_fixture.cpp index 0601b17191..e041df7128 100644 --- a/tests/test_common/test_fixture.cpp +++ b/tests/test_common/test_fixture.cpp @@ -1,48 +1,26 @@ #include "test_fixture.hpp" -#include <algorithm> -#include <cstdint> -#include <cstdio> -#include <cstdlib> -#include "gmock/gmock-cardinalities.h" #include "gmock/gmock.h" -#include "gtest/gtest.h" -#include "keyboard_report_util.hpp" -#include "keycode.h" #include "test_driver.hpp" -#include "test_logger.hpp" #include "test_matrix.h" -#include "test_keymap_key.hpp" - -extern "C" { +#include "keyboard.h" #include "action.h" #include "action_tapping.h" -#include "action_util.h" -#include "action_layer.h" + +extern "C" { #include "debug.h" #include "eeconfig.h" -#include "keyboard.h" -#include "keymap.h" +#include "action_layer.h" void set_time(uint32_t t); void advance_time(uint32_t ms); } using testing::_; - -/* This is used for dynamic dispatching keymap_key_to_keycode calls to the current active test_fixture. */ -TestFixture* TestFixture::m_this = nullptr; - -/* Override weak QMK function to allow the usage of isolated per-test keymaps in unit-tests. - * The actual call is dynamicaly dispatched to the current active test fixture, which in turn has it's own keymap. */ -extern "C" uint16_t keymap_key_to_keycode(uint8_t layer, keypos_t position) { - uint16_t keycode; - TestFixture::m_this->get_keycode(layer, position, &keycode); - return keycode; -} +using testing::AnyNumber; +using testing::Between; +using testing::Return; void TestFixture::SetUpTestCase() { - test_logger.info() << "TestFixture setup-up start." << std::endl; - // The following is enough to bootstrap the values set in main eeconfig_init_quantum(); eeconfig_update_debug(debug_config.raw); @@ -50,99 +28,23 @@ void TestFixture::SetUpTestCase() { TestDriver driver; EXPECT_CALL(driver, send_keyboard_mock(_)); keyboard_init(); - - test_logger.info() << "TestFixture setup-up end." << std::endl; } void TestFixture::TearDownTestCase() {} -TestFixture::TestFixture() { m_this = this; } +TestFixture::TestFixture() {} TestFixture::~TestFixture() { - test_logger.info() << "TestFixture clean-up start." << std::endl; TestDriver driver; - - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(2); - - /* Reset keyboard state. */ - clear_all_keys(); - - clear_keyboard(); - - clear_oneshot_mods(); - clear_oneshot_locked_mods(); - reset_oneshot_layer(); - + // Run for a while to make sure all keys are completely released + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(AnyNumber()); layer_clear(); - -#if defined(SWAP_HANDS_ENABLE) - clear_oneshot_swaphands(); -#endif - - idle_for(TAPPING_TERM * 10); - testing::Mock::VerifyAndClearExpectations(&driver); - - /* Verify that the matrix really is cleared */ - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - idle_for(TAPPING_TERM * 10); + clear_all_keys(); + idle_for(TAPPING_TERM + 10); testing::Mock::VerifyAndClearExpectations(&driver); - - m_this = nullptr; - - test_logger.info() << "TestFixture clean-up end." << std::endl; - - print_test_log(); -} - -void TestFixture::add_key(KeymapKey key) { - if (this->find_key(key.layer, key.position)) { - FAIL() << "Key is already mapped for layer " << +key.layer << " and (column,row) (" << +key.position.col << "," << +key.position.row << ")"; - } - - this->keymap.push_back(key); -} - -void TestFixture::set_keymap(std::initializer_list<KeymapKey> keys) { - this->keymap.clear(); - for (auto& key : keys) { - add_key(key); - } -} - -const KeymapKey* TestFixture::find_key(layer_t layer, keypos_t position) const { - auto keymap_key_predicate = [&](KeymapKey candidate) { return candidate.layer == layer && candidate.position.col == position.col && candidate.position.row == position.row; }; - - auto result = std::find_if(this->keymap.begin(), this->keymap.end(), keymap_key_predicate); - - if (result != std::end(this->keymap)) { - return &(*result); - } - return nullptr; -} - -void TestFixture::get_keycode(const layer_t layer, const keypos_t position, uint16_t* result) const { - bool key_is_out_of_bounds = position.col >= MATRIX_COLS && position.row >= MATRIX_ROWS; - - if (key_is_out_of_bounds) { - /* See if this is done in hardware as well, because this is 100% out of bounds reads on all QMK keebs out there. */ - auto msg = [&]() { - std::stringstream msg; - msg << "Keycode for position (" << +position.col << "," << +position.row << ") requested! This is out of bounds." << std::endl; - return msg.str(); - }(); - - *result = KC_NO; - test_logger.error() << msg; - EXPECT_FALSE(key_is_out_of_bounds) << msg; - return; - } - - if (auto key = this->find_key(layer, position)) { - *result = key->code; - return; - } - - FAIL() << "No key is mapped for layer " << +layer << " and (column,row) " << +position.col << "," << +position.row << ")"; + // Verify that the matrix really is cleared + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(0); + idle_for(TAPPING_TERM + 10); } void TestFixture::run_one_scan_loop() { @@ -155,17 +57,3 @@ void TestFixture::idle_for(unsigned time) { run_one_scan_loop(); } } - -void TestFixture::print_test_log() const { - const ::testing::TestInfo* const test_info = ::testing::UnitTest::GetInstance()->current_test_info(); - if (HasFailure()) { - std::cerr << test_info->test_case_name() << "." << test_info->name() << " failed!" << std::endl; - test_logger.print_log(); - } - test_logger.reset(); -} - -void TestFixture::expect_layer_state(layer_t layer_state) const { - test_logger.trace() << "Layer state: (" << +layer_state << ") Highest layer bit: (" << +get_highest_layer(layer_state) << ")" << std::endl; - EXPECT_TRUE(layer_state_is(layer_state)); -} diff --git a/tests/test_common/test_fixture.hpp b/tests/test_common/test_fixture.hpp index 73b5d8d3e8..340503665b 100644 --- a/tests/test_common/test_fixture.hpp +++ b/tests/test_common/test_fixture.hpp @@ -16,34 +16,15 @@ #pragma once -#include <cstdint> -#include <unordered_map> -#include <optional> #include "gtest/gtest.h" -#include "keyboard.h" -#include "test_keymap_key.hpp" class TestFixture : public testing::Test { - public: - static TestFixture* m_this; - +public: TestFixture(); ~TestFixture(); static void SetUpTestCase(); static void TearDownTestCase(); - void set_keymap(std::initializer_list<KeymapKey> keycodes); - void add_key(const KeymapKey key); - - const KeymapKey* find_key(const layer_t layer_t, const keypos_t position) const; - void get_keycode(const layer_t layer, const keypos_t position, uint16_t* result) const; - void run_one_scan_loop(); void idle_for(unsigned ms); - - void expect_layer_state(layer_t layer) const; - - protected: - void print_test_log() const; - std::vector<KeymapKey> keymap; }; diff --git a/tests/test_common/test_keymap_key.cpp b/tests/test_common/test_keymap_key.cpp deleted file mode 100644 index 878ae097bf..0000000000 --- a/tests/test_common/test_keymap_key.cpp +++ /dev/null @@ -1,30 +0,0 @@ -/* Copyright 2021 Stefan Kerkmann - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "test_keymap_key.hpp" -#include "test_logger.hpp" -#include "gtest/gtest-message.h" -#include "gtest/gtest.h" - -void KeymapKey::press() { - test_logger.trace() << "Key pressed: (" << +this->position.col << "," << +this->position.row << ")" << std::endl; - press_key(this->position.col, this->position.row); -} - -void KeymapKey::release() { - test_logger.trace() << "Key released: (" << +this->position.col << "," << +this->position.row << ")" << std::endl; - release_key(this->position.col, this->position.row); -} \ No newline at end of file diff --git a/tests/test_common/test_keymap_key.hpp b/tests/test_common/test_keymap_key.hpp deleted file mode 100644 index 7861cb4a32..0000000000 --- a/tests/test_common/test_keymap_key.hpp +++ /dev/null @@ -1,46 +0,0 @@ -/* Copyright 2021 Stefan Kerkmann - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -extern "C" { -#include "keyboard.h" -#include "test_matrix.h" -} - -#include <cassert> - -typedef uint8_t layer_t; - -struct KeymapKey { - KeymapKey(layer_t layer, uint8_t col, uint8_t row, uint16_t keycode) : layer(layer), position({.col = col, .row = row}), code(keycode), report_code(keycode) { validate(); } - KeymapKey(layer_t layer, uint8_t col, uint8_t row, uint16_t keycode, uint16_t report_code) : layer(layer), position({.col = col, .row = row}), code(keycode), report_code(report_code) { validate(); } - - void press(); - void release(); - - const layer_t layer; - const keypos_t position; - const uint16_t code; - /* Sometimes the keycode does not match the code that is send in the usb report, so we provide it here. */ - const uint16_t report_code; - - private: - void validate() { - assert(position.col <= MATRIX_COLS); - assert(position.row <= MATRIX_ROWS); - } -}; \ No newline at end of file diff --git a/tests/test_common/test_logger.cpp b/tests/test_common/test_logger.cpp deleted file mode 100644 index 959fdde5ec..0000000000 --- a/tests/test_common/test_logger.cpp +++ /dev/null @@ -1,39 +0,0 @@ -/* Copyright 2021 Stefan Kerkmann - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include <iostream> -#include "test_logger.hpp" - -TestLogger test_logger; - -TestLogger& TestLogger::info() { - *this << "[ INFO ] "; - return *this; -} - -TestLogger& TestLogger::trace() { - *this << "[ TRACE ] "; - return *this; -} - -TestLogger& TestLogger::error() { - *this << "[ ERROR ] "; - return *this; -} - -void TestLogger::reset() { this->m_log.str(""); }; - -void TestLogger::print_log() { std::cerr << this->m_log.str(); } diff --git a/tests/test_common/test_logger.hpp b/tests/test_common/test_logger.hpp deleted file mode 100644 index 348af7fab8..0000000000 --- a/tests/test_common/test_logger.hpp +++ /dev/null @@ -1,35 +0,0 @@ -/* Copyright 2021 Stefan Kerkmann - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#include <ostream> -#include <sstream> - -class TestLogger : public std::ostream { - public: - TestLogger() : std::ostream(&m_log){}; - TestLogger& info(); - TestLogger& trace(); - TestLogger& error(); - void print_log(); - void reset(); - - private: - std::stringbuf m_log; -}; - -extern TestLogger test_logger; \ No newline at end of file From dbc7b535178020063f80aaaabac3ca8ff9f6e8bb Mon Sep 17 00:00:00 2001 From: Joel Challis <git@zvecr.com> Date: Tue, 23 Nov 2021 00:23:23 +0000 Subject: [PATCH 566/595] qmk format-python - filter for Python files (#15271) * qmk format-python filter all files * filter changed files too --- lib/python/qmk/cli/format/python.py | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/lib/python/qmk/cli/format/python.py b/lib/python/qmk/cli/format/python.py index 95868d18a0..47b5c45fd5 100755 --- a/lib/python/qmk/cli/format/python.py +++ b/lib/python/qmk/cli/format/python.py @@ -25,9 +25,8 @@ def yapf_run(files): def filter_files(files): """Yield only files to be formatted and skip the rest """ - for file in files: - if file and file.name.split('.')[-1] in py_file_suffixes: + if file and normpath(file).name.split('.')[-1] in py_file_suffixes: yield file else: cli.log.debug('Skipping file %s', file) @@ -53,12 +52,14 @@ def format_python(cli): cli.log.warning('Filenames passed with -a, only formatting: %s', ','.join(map(str, files))) elif cli.args.all_files: - files = py_dirs + git_ls_cmd = ['git', 'ls-files', *py_dirs] + git_ls = cli.run(git_ls_cmd, stdin=DEVNULL) + files = list(filter_files(git_ls.stdout.split('\n'))) else: git_diff_cmd = ['git', 'diff', '--name-only', cli.args.base_branch, *py_dirs] git_diff = cli.run(git_diff_cmd, stdin=DEVNULL) - files = list(filter(None, git_diff.stdout.split('\n'))) + files = list(filter_files(git_diff.stdout.split('\n'))) # Sanity check if not files: From 155076889a610b991ff3214d66f4828780c834cf Mon Sep 17 00:00:00 2001 From: Joel Challis <git@zvecr.com> Date: Tue, 23 Nov 2021 00:49:18 +0000 Subject: [PATCH 567/595] Ignore deleted files when formatting codebase (#15274) --- .github/workflows/format.yaml | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/.github/workflows/format.yaml b/.github/workflows/format.yaml index 2a309e0afd..4d9711d73c 100644 --- a/.github/workflows/format.yaml +++ b/.github/workflows/format.yaml @@ -36,9 +36,10 @@ jobs: - name: Run qmk formatters shell: 'bash {0}' run: | - qmk format-c --core-only $(< ~/files.txt) - qmk format-python $(< ~/files.txt) - qmk format-text $(< ~/files.txt) + cat ~/files_added.txt ~/files_modified.txt > ~/files_changed.txt + qmk format-c --core-only $(< ~/files_changed.txt) + qmk format-python $(< ~/files_changed.txt) + qmk format-text $(< ~/files_changed.txt) - name: Fail when formatting required run: | From 6f425c8aa67c0036c002ee3aa24a81887d31ccfe Mon Sep 17 00:00:00 2001 From: Joel Challis <git@zvecr.com> Date: Tue, 23 Nov 2021 01:20:46 +0000 Subject: [PATCH 568/595] Ignore exit codes for formatters (#15275) --- .github/workflows/format.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/.github/workflows/format.yaml b/.github/workflows/format.yaml index 4d9711d73c..59c3d7511e 100644 --- a/.github/workflows/format.yaml +++ b/.github/workflows/format.yaml @@ -36,6 +36,7 @@ jobs: - name: Run qmk formatters shell: 'bash {0}' run: | + set +e cat ~/files_added.txt ~/files_modified.txt > ~/files_changed.txt qmk format-c --core-only $(< ~/files_changed.txt) qmk format-python $(< ~/files_changed.txt) From 33d8af50c3484ced6b4bb38e7f49fb323090ddab Mon Sep 17 00:00:00 2001 From: Drashna Jaelre <drashna@live.com> Date: Mon, 22 Nov 2021 17:22:49 -0800 Subject: [PATCH 569/595] [Keyboard] Disable features on SplitKB boards to fit under size (#15262) --- keyboards/splitkb/kyria/rules.mk | 4 ++-- keyboards/splitkb/zima/keymaps/via/rules.mk | 4 ++++ 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/keyboards/splitkb/kyria/rules.mk b/keyboards/splitkb/kyria/rules.mk index f0e5cfc3d5..42016a3ca8 100644 --- a/keyboards/splitkb/kyria/rules.mk +++ b/keyboards/splitkb/kyria/rules.mk @@ -7,8 +7,8 @@ BOOTLOADER = atmel-dfu # Build Options # change yes to no to disable # -BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite -MOUSEKEY_ENABLE = yes # Mouse keys +BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys EXTRAKEY_ENABLE = yes # Audio control and System control CONSOLE_ENABLE = no # Console for debug COMMAND_ENABLE = no # Commands for debug and configuration diff --git a/keyboards/splitkb/zima/keymaps/via/rules.mk b/keyboards/splitkb/zima/keymaps/via/rules.mk index 1eb438e469..5ddd38bb0f 100644 --- a/keyboards/splitkb/zima/keymaps/via/rules.mk +++ b/keyboards/splitkb/zima/keymaps/via/rules.mk @@ -1,2 +1,6 @@ VIA_ENABLE = yes HAPTIC_ENABLE = no + +SPACE_CADET_ENABLE = no +GRAVE_ESC_ENABLE = no +MAGIC_ENABLE = no From e73d22d7f1ebbd03cab95b42b01428d3b9a03200 Mon Sep 17 00:00:00 2001 From: Joel Challis <git@zvecr.com> Date: Tue, 23 Nov 2021 01:40:53 +0000 Subject: [PATCH 570/595] Ignore exit codes for formatters (#15276) --- .github/workflows/format.yaml | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/.github/workflows/format.yaml b/.github/workflows/format.yaml index 59c3d7511e..f1525526ce 100644 --- a/.github/workflows/format.yaml +++ b/.github/workflows/format.yaml @@ -36,11 +36,10 @@ jobs: - name: Run qmk formatters shell: 'bash {0}' run: | - set +e cat ~/files_added.txt ~/files_modified.txt > ~/files_changed.txt - qmk format-c --core-only $(< ~/files_changed.txt) - qmk format-python $(< ~/files_changed.txt) - qmk format-text $(< ~/files_changed.txt) + qmk format-c --core-only $(< ~/files_changed.txt) || true + qmk format-python $(< ~/files_changed.txt) || true + qmk format-text $(< ~/files_changed.txt) || true - name: Fail when formatting required run: | From a24bdccee0580d1263733bc7e66e4e4f97713f19 Mon Sep 17 00:00:00 2001 From: Stefan Kerkmann <karlk90@pm.me> Date: Tue, 23 Nov 2021 03:31:01 +0100 Subject: [PATCH 571/595] [Tests] Increase QMK test coverage take 2 (#15269) * Add per-test keymaps * Add better trace and info logs for failed unit-tests * Add layer state assertion with tracing message * Use individual test binaries configuration options * Add basic qmk functionality tests * Add tap hold configurations tests * Add auto shift tests Co-authored-by: Nick Brassel <nick@tzarc.org> --- Makefile | 7 +- build_full_test.mk | 23 +- build_test.mk | 19 +- testlist.mk | 4 +- tests/auto_shift/config.h | 19 + tests/auto_shift/test.mk | 20 + tests/auto_shift/test_auto_shift.cpp | 73 +++ tests/basic/config.h | 3 +- tests/basic/keymap.c | 45 -- tests/basic/test.mk | 18 + tests/basic/test_action_layer.cpp | 427 +++++++++++++++--- tests/basic/test_keypress.cpp | 213 ++++++--- tests/basic/test_macro.cpp | 19 +- tests/basic/test_one_shot_keys.cpp | 197 ++++++++ tests/basic/test_tapping.cpp | 50 +- .../default_mod_tap/config.h | 21 + .../default_mod_tap/test.mk | 18 + .../default_mod_tap/test_tap_hold.cpp | 230 ++++++++++ .../ignore_mod_tap_interrupt/config.h | 21 + .../ignore_mod_tap_interrupt/test.mk | 18 + .../test_tap_hold.cpp | 136 ++++++ .../permissive_hold/config.h | 21 + .../permissive_hold/test.mk | 18 + .../permissive_hold/test_one_shot_keys.cpp | 76 ++++ .../permissive_hold/test_tap_hold.cpp | 132 ++++++ .../config.h | 22 + .../test.mk | 18 + .../test_tap_hold.cpp | 134 ++++++ .../retro_tapping/config.h | 21 + .../retro_tapping/test.mk | 18 + .../retro_tapping/test_tap_hold.cpp | 52 +++ .../retro_tapping/test_tapping.cpp | 112 +++++ .../tapping_force_hold/config.h | 21 + .../tapping_force_hold/test.mk | 18 + .../tapping_force_hold/test_action_layer.cpp | 81 ++++ .../tapping_force_hold/test_tap_hold.cpp | 215 +++++++++ .../{basic/rules.mk => test_common/build.mk} | 4 +- tests/test_common/keyboard_report_util.cpp | 21 +- tests/test_common/keymap.c | 33 ++ tests/test_common/test_common.h | 4 + tests/test_common/test_driver.cpp | 5 +- tests/test_common/test_driver.hpp | 29 +- tests/test_common/test_fixture.cpp | 142 +++++- tests/test_common/test_fixture.hpp | 21 +- tests/test_common/test_keymap_key.cpp | 30 ++ tests/test_common/test_keymap_key.hpp | 46 ++ tests/test_common/test_logger.cpp | 39 ++ tests/test_common/test_logger.hpp | 35 ++ 48 files changed, 2703 insertions(+), 246 deletions(-) create mode 100644 tests/auto_shift/config.h create mode 100644 tests/auto_shift/test.mk create mode 100644 tests/auto_shift/test_auto_shift.cpp delete mode 100644 tests/basic/keymap.c create mode 100644 tests/basic/test.mk create mode 100644 tests/basic/test_one_shot_keys.cpp create mode 100644 tests/tap_hold_configurations/default_mod_tap/config.h create mode 100644 tests/tap_hold_configurations/default_mod_tap/test.mk create mode 100644 tests/tap_hold_configurations/default_mod_tap/test_tap_hold.cpp create mode 100644 tests/tap_hold_configurations/ignore_mod_tap_interrupt/config.h create mode 100644 tests/tap_hold_configurations/ignore_mod_tap_interrupt/test.mk create mode 100644 tests/tap_hold_configurations/ignore_mod_tap_interrupt/test_tap_hold.cpp create mode 100644 tests/tap_hold_configurations/permissive_hold/config.h create mode 100644 tests/tap_hold_configurations/permissive_hold/test.mk create mode 100644 tests/tap_hold_configurations/permissive_hold/test_one_shot_keys.cpp create mode 100644 tests/tap_hold_configurations/permissive_hold/test_tap_hold.cpp create mode 100644 tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/config.h create mode 100644 tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/test.mk create mode 100644 tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/test_tap_hold.cpp create mode 100644 tests/tap_hold_configurations/retro_tapping/config.h create mode 100644 tests/tap_hold_configurations/retro_tapping/test.mk create mode 100644 tests/tap_hold_configurations/retro_tapping/test_tap_hold.cpp create mode 100644 tests/tap_hold_configurations/retro_tapping/test_tapping.cpp create mode 100644 tests/tap_hold_configurations/tapping_force_hold/config.h create mode 100644 tests/tap_hold_configurations/tapping_force_hold/test.mk create mode 100644 tests/tap_hold_configurations/tapping_force_hold/test_action_layer.cpp create mode 100644 tests/tap_hold_configurations/tapping_force_hold/test_tap_hold.cpp rename tests/{basic/rules.mk => test_common/build.mk} (92%) create mode 100644 tests/test_common/keymap.c create mode 100644 tests/test_common/test_common.h create mode 100644 tests/test_common/test_keymap_key.cpp create mode 100644 tests/test_common/test_keymap_key.hpp create mode 100644 tests/test_common/test_logger.cpp create mode 100644 tests/test_common/test_logger.hpp diff --git a/Makefile b/Makefile index c221cb89e0..88f430619e 100644 --- a/Makefile +++ b/Makefile @@ -378,11 +378,12 @@ define PARSE_ALL_KEYMAPS endef define BUILD_TEST - TEST_NAME := $1 + TEST_PATH := $1 + TEST_NAME := $$(notdir $$(TEST_PATH)) MAKE_TARGET := $2 COMMAND := $1 MAKE_CMD := $$(MAKE) -r -R -C $(ROOT_DIR) -f build_test.mk $$(MAKE_TARGET) - MAKE_VARS := TEST=$$(TEST_NAME) FULL_TESTS="$$(FULL_TESTS)" + MAKE_VARS := TEST=$$(TEST_NAME) TEST_PATH=$$(TEST_PATH) FULL_TESTS="$$(FULL_TESTS)" MAKE_MSG := $$(MSG_MAKE_TEST) $$(eval $$(call BUILD)) ifneq ($$(MAKE_TARGET),clean) @@ -406,7 +407,7 @@ define PARSE_TEST ifeq ($$(TEST_NAME),all) MATCHED_TESTS := $$(TEST_LIST) else - MATCHED_TESTS := $$(foreach TEST,$$(TEST_LIST),$$(if $$(findstring $$(TEST_NAME),$$(TEST)),$$(TEST),)) + MATCHED_TESTS := $$(foreach TEST, $$(TEST_LIST),$$(if $$(findstring $$(TEST_NAME), $$(notdir $$(TEST))), $$(TEST),)) endif $$(foreach TEST,$$(MATCHED_TESTS),$$(eval $$(call BUILD_TEST,$$(TEST),$$(TEST_TARGET)))) endef diff --git a/build_full_test.mk b/build_full_test.mk index f8030cb060..4cd1ac61b5 100644 --- a/build_full_test.mk +++ b/build_full_test.mk @@ -13,21 +13,24 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. -#include $(TMK_PATH)/protocol.mk +$(TEST)_INC := \ + tests\test_common\common_config.h -TEST_PATH=tests/$(TEST) - -$(TEST)_SRC= \ - $(TEST_PATH)/keymap.c \ +$(TEST)_SRC := \ $(TMK_COMMON_SRC) \ $(QUANTUM_SRC) \ $(SRC) \ + tests/test_common/keymap.c \ tests/test_common/matrix.c \ tests/test_common/test_driver.cpp \ tests/test_common/keyboard_report_util.cpp \ - tests/test_common/test_fixture.cpp -$(TEST)_SRC += $(patsubst $(ROOTDIR)/%,%,$(wildcard $(TEST_PATH)/*.cpp)) + tests/test_common/test_fixture.cpp \ + tests/test_common/test_keymap_key.cpp \ + tests/test_common/test_logger.cpp \ + $(patsubst $(ROOTDIR)/%,%,$(wildcard $(TEST_PATH)/*.cpp)) + +$(TEST)_DEFS := $(TMK_COMMON_DEFS) $(OPT_DEFS) + +$(TEST)_CONFIG := $(TEST_PATH)/config.h -$(TEST)_DEFS=$(TMK_COMMON_DEFS) $(OPT_DEFS) -$(TEST)_CONFIG=$(TEST_PATH)/config.h -VPATH+=$(TOP_DIR)/tests/test_common +VPATH += $(TOP_DIR)/tests/test_common \ No newline at end of file diff --git a/build_test.mk b/build_test.mk index 36cb7936ed..136a0455f0 100644 --- a/build_test.mk +++ b/build_test.mk @@ -16,14 +16,14 @@ TEST_OBJ = $(BUILD_DIR)/test_obj OUTPUTS := $(TEST_OBJ)/$(TEST) $(GTEST_OUTPUT) GTEST_INC := \ - $(LIB_PATH)/googletest/googletest/include\ - $(LIB_PATH)/googletest/googlemock/include\ + $(LIB_PATH)/googletest/googletest/include \ + $(LIB_PATH)/googletest/googlemock/include -GTEST_INTERNAL_INC :=\ - $(LIB_PATH)/googletest/googletest\ +GTEST_INTERNAL_INC := \ + $(LIB_PATH)/googletest/googletest \ $(LIB_PATH)/googletest/googlemock -$(GTEST_OUTPUT)_SRC :=\ +$(GTEST_OUTPUT)_SRC := \ googletest/src/gtest-all.cc\ googlemock/src/gmock-all.cc @@ -33,9 +33,9 @@ $(GTEST_OUTPUT)_INC := $(GTEST_INC) $(GTEST_INTERNAL_INC) LDFLAGS += -lstdc++ -lpthread -shared-libgcc CREATE_MAP := no -VPATH +=\ - $(LIB_PATH)/googletest\ - $(LIB_PATH)/googlemock\ +VPATH += \ + $(LIB_PATH)/googletest \ + $(LIB_PATH)/googlemock \ $(LIB_PATH)/printf all: elf @@ -49,7 +49,8 @@ CONSOLE_ENABLE = yes endif ifneq ($(filter $(FULL_TESTS),$(TEST)),) -include tests/$(TEST)/rules.mk +include tests/test_common/build.mk +include $(TEST_PATH)/test.mk endif include common_features.mk diff --git a/testlist.mk b/testlist.mk index cff784dad6..d2bb571be6 100644 --- a/testlist.mk +++ b/testlist.mk @@ -1,5 +1,5 @@ -TEST_LIST = $(notdir $(patsubst %/rules.mk,%,$(wildcard $(ROOT_DIR)/tests/*/rules.mk))) -FULL_TESTS := $(TEST_LIST) +TEST_LIST = $(sort $(patsubst %/test.mk,%, $(shell find $(ROOT_DIR)tests -type f -name test.mk))) +FULL_TESTS := $(notdir $(TEST_LIST)) include $(QUANTUM_PATH)/debounce/tests/testlist.mk include $(QUANTUM_PATH)/encoder/tests/testlist.mk diff --git a/tests/auto_shift/config.h b/tests/auto_shift/config.h new file mode 100644 index 0000000000..4f343b4529 --- /dev/null +++ b/tests/auto_shift/config.h @@ -0,0 +1,19 @@ +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "test_common.h" \ No newline at end of file diff --git a/tests/auto_shift/test.mk b/tests/auto_shift/test.mk new file mode 100644 index 0000000000..4259c606e4 --- /dev/null +++ b/tests/auto_shift/test.mk @@ -0,0 +1,20 @@ +# Copyright 2021 Stefan Kerkmann +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# -------------------------------------------------------------------------------- +# Keep this file, even if it is empty, as a marker that this folder contains tests +# -------------------------------------------------------------------------------- + +AUTO_SHIFT_ENABLE = yes \ No newline at end of file diff --git a/tests/auto_shift/test_auto_shift.cpp b/tests/auto_shift/test_auto_shift.cpp new file mode 100644 index 0000000000..9c5ed9a832 --- /dev/null +++ b/tests/auto_shift/test_auto_shift.cpp @@ -0,0 +1,73 @@ +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "keyboard_report_util.hpp" +#include "keycode.h" +#include "test_common.hpp" +#include "action_tapping.h" +#include "test_fixture.hpp" +#include "test_keymap_key.hpp" + +using testing::_; +using testing::InSequence; + +class AutoShift : public TestFixture {}; + +TEST_F(AutoShift, key_release_before_timeout) { + TestDriver driver; + InSequence s; + auto regular_key = KeymapKey(0, 2, 0, KC_A); + + set_keymap({regular_key}); + + /* Press regular key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + regular_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release regular key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_A))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + regular_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(AutoShift, key_release_after_timeout) { + TestDriver driver; + InSequence s; + auto regular_key = KeymapKey(0, 2, 0, KC_A); + + set_keymap({regular_key}); + + /* Press regular key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + regular_key.press(); + idle_for(AUTO_SHIFT_TIMEOUT); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release regular key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_A))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + regular_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} \ No newline at end of file diff --git a/tests/basic/config.h b/tests/basic/config.h index 99bd62d991..85fa9d691d 100644 --- a/tests/basic/config.h +++ b/tests/basic/config.h @@ -16,5 +16,4 @@ #pragma once -#define MATRIX_ROWS 4 -#define MATRIX_COLS 10 +#include "test_common.h" \ No newline at end of file diff --git a/tests/basic/keymap.c b/tests/basic/keymap.c deleted file mode 100644 index 2b5747abb7..0000000000 --- a/tests/basic/keymap.c +++ /dev/null @@ -1,45 +0,0 @@ -/* Copyright 2017 Fred Sundvik - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "quantum.h" - -// Don't rearrange keys as existing tests might rely on the order -// Col2, Row 0 has to be KC_NO, because tests rely on it - -#define COMBO1 RSFT(LCTL(KC_O)) - -const uint16_t PROGMEM - keymaps[][MATRIX_ROWS][MATRIX_COLS] = - { - [0] = - { - // 0 1 2 3 4 5 6 7 8 9 - {KC_A, KC_B, KC_NO, KC_LSFT, KC_RSFT, KC_LCTL, COMBO1, SFT_T(KC_P), M(0), KC_NO}, - {KC_EQL, KC_PLUS, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO}, - {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO}, - {KC_C, KC_D, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO}, - }, -}; - -const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { - if (record->event.pressed) { - switch (id) { - case 0: - return MACRO(D(LSFT), T(H), U(LSFT), T(E), T(L), T(L), T(O), T(SPACE), W(100), D(LSFT), T(W), U(LSFT), I(10), T(O), T(R), T(L), T(D), D(LSFT), T(1), U(LSFT), END); - } - } - return MACRO_NONE; -}; diff --git a/tests/basic/test.mk b/tests/basic/test.mk new file mode 100644 index 0000000000..29690d1adf --- /dev/null +++ b/tests/basic/test.mk @@ -0,0 +1,18 @@ +# Copyright 2017 Fred Sundvik +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# -------------------------------------------------------------------------------- +# Keep this file, even if it is empty, as a marker that this folder contains tests +# -------------------------------------------------------------------------------- \ No newline at end of file diff --git a/tests/basic/test_action_layer.cpp b/tests/basic/test_action_layer.cpp index d00a0859b9..1b12d13642 100644 --- a/tests/basic/test_action_layer.cpp +++ b/tests/basic/test_action_layer.cpp @@ -14,39 +14,54 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ +#include "gtest/gtest.h" +#include "keyboard_report_util.hpp" #include "test_common.hpp" using testing::_; -using testing::Return; +using testing::InSequence; class ActionLayer : public TestFixture {}; -// TEST_F(ActionLayer, LayerStateDBG) { -// layer_state_set(0); -// } - -// TEST_F(ActionLayer, LayerStateSet) { -// layer_state_set(0); -// EXPECT_EQ(layer_state, 0); -// layer_state_set(0b001100); -// EXPECT_EQ(layer_state, 0b001100); -// } - -// TEST_F(ActionLayer, LayerStateIs) { -// layer_state_set(0); -// EXPECT_EQ(layer_state_is(0), true); -// EXPECT_EQ(layer_state_is(1), true); -// layer_state_set(1); -// EXPECT_EQ(layer_state_is(0), true); -// EXPECT_EQ(layer_state_is(1), true); -// layer_state_set(2); -// EXPECT_EQ(layer_state_is(0), false); -// EXPECT_EQ(layer_state_is(1), false); -// EXPECT_EQ(layer_state_is(2), true); -// } +TEST_F(ActionLayer, LayerStateDBG) { + TestDriver driver; + + layer_state_set(0); + + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(ActionLayer, LayerStateSet) { + TestDriver driver; + + layer_state_set(0); + EXPECT_EQ(layer_state, 0); + layer_state_set(0b001100); + EXPECT_EQ(layer_state, 0b001100); + + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(ActionLayer, LayerStateIs) { + TestDriver driver; + + layer_state_set(0); + EXPECT_EQ(layer_state_is(0), true); + EXPECT_EQ(layer_state_is(1), false); + layer_state_set(1); + EXPECT_EQ(layer_state_is(0), true); + EXPECT_EQ(layer_state_is(1), false); + layer_state_set(2); + EXPECT_EQ(layer_state_is(0), false); + EXPECT_EQ(layer_state_is(1), true); + EXPECT_EQ(layer_state_is(2), false); + + testing::Mock::VerifyAndClearExpectations(&driver); +} TEST_F(ActionLayer, LayerStateCmp) { - uint32_t prev_layer; + TestDriver driver; + uint32_t prev_layer; prev_layer = 0; EXPECT_EQ(layer_state_cmp(prev_layer, 0), true); @@ -60,33 +75,339 @@ TEST_F(ActionLayer, LayerStateCmp) { EXPECT_EQ(layer_state_cmp(prev_layer, 0), false); EXPECT_EQ(layer_state_cmp(prev_layer, 1), true); EXPECT_EQ(layer_state_cmp(prev_layer, 2), false); + + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(ActionLayer, LayerClear) { + TestDriver driver; + + layer_clear(); + EXPECT_EQ(layer_state, 0); + + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(ActionLayer, LayerMove) { + TestDriver driver; + + layer_move(0); + EXPECT_EQ(layer_state, 1); + layer_move(3); + EXPECT_EQ(layer_state, 0b1000); + + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(ActionLayer, LayerOn) { + TestDriver driver; + + layer_clear(); + layer_on(1); + layer_on(3); + layer_on(3); + EXPECT_EQ(layer_state, 0b1010); + + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(ActionLayer, LayerOff) { + TestDriver driver; + + layer_clear(); + layer_on(1); + layer_on(3); + layer_off(3); + layer_off(2); + EXPECT_EQ(layer_state, 0b0010); + + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(ActionLayer, MomentaryLayerDoesNothing) { + TestDriver driver; + KeymapKey layer_key = KeymapKey{0, 0, 0, MO(1)}; + + set_keymap({layer_key}); + + /* Press and release MO, nothing should happen. */ + /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + layer_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + layer_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(ActionLayer, MomentaryLayerWithKeypress) { + TestDriver driver; + KeymapKey layer_key = KeymapKey{0, 0, 0, MO(1)}; + + /* These keys must have the same position in the matrix, only the layer is different. */ + KeymapKey regular_key = KeymapKey{0, 1, 0, KC_A}; + set_keymap({layer_key, regular_key, KeymapKey{1, 1, 0, KC_B}}); + + /* Press MO. */ + /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + layer_key.press(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(1)); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press key on layer 1 */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_B))).Times(1); + regular_key.press(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(1)); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release key on layer 1 */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + regular_key.release(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(1)); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release MO */ + /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + layer_key.release(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(0)); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(ActionLayer, ToggleLayerDoesNothing) { + GTEST_SKIP() << "TODO: Toggle layer does not activate the expected layer on key press but on release."; + + TestDriver driver; + KeymapKey layer_key = KeymapKey{0, 0, 0, TG(1)}; + + set_keymap({layer_key}); + + /* Press TG. Layer state should not change as it's applied on release. */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + layer_key.press(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(1)); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release TG. */ + /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + layer_key.release(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(1)); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(ActionLayer, ToggleLayerUpAndDown) { + GTEST_SKIP() << "TODO: Toggle layer does not activate the expected layer on key press but on release."; + + TestDriver driver; + KeymapKey toggle_layer_1_on_layer_0 = KeymapKey{0, 0, 0, TG(1)}; + KeymapKey toggle_layer_0_on_layer_1 = KeymapKey{1, 1, 0, TG(0)}; + + set_keymap({toggle_layer_1_on_layer_0, toggle_layer_0_on_layer_1}); + + /* Toggle Layer 1. */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + toggle_layer_1_on_layer_0.press(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(1)); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + toggle_layer_1_on_layer_0.release(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(1)); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Toggle Layer 0. */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + toggle_layer_0_on_layer_1.press(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(0)); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + toggle_layer_0_on_layer_1.release(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(0)); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(ActionLayer, LayerTapToggleDoesNothing) { + GTEST_SKIP() << "TODO: Tap toggle layer does not activate the expected layer on key press."; + + TestDriver driver; + KeymapKey layer_key = KeymapKey{0, 0, 0, TT(1)}; + + set_keymap({layer_key}); + + /* Press and release TT. */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(0); + layer_key.press(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(1)); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(2); + layer_key.release(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(0)); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(ActionLayer, LayerTapToggleWithKeypress) { + GTEST_SKIP() << "TODO: Tap toggle layer does not activate the expected layer on key press."; + + TestDriver driver; + KeymapKey layer_key = KeymapKey{0, 0, 0, TT(1)}; + + /* These keys must have the same position in the matrix, only the layer is different. */ + KeymapKey regular_key = KeymapKey{0, 1, 0, KC_A}; + set_keymap({layer_key, regular_key, KeymapKey{1, 1, 0, KC_B}}); + + /* Press TT. */ + /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(0); + layer_key.press(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(1)); + testing::Mock::VerifyAndClearExpectations(&driver); + + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_B))).Times(1); + regular_key.press(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(1)); + testing::Mock::VerifyAndClearExpectations(&driver); + + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + regular_key.release(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(1)); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + layer_key.release(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(0)); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(ActionLayer, LayerTapToggleWithToggleWithKeypress) { + GTEST_SKIP() << "TODO: Tap toggle layer does not activate the expected layer on key press."; + + TestDriver driver; + KeymapKey layer_key = KeymapKey{0, 0, 0, TT(1)}; + + /* These keys must have the same position in the matrix, only the layer is different. */ + KeymapKey regular_key = KeymapKey{0, 1, 0, KC_A}; + set_keymap({layer_key, regular_key, KeymapKey{1, 1, 0, KC_B}}); + + /* Tap TT five times . */ + /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(9); + + layer_key.press(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(1)); + layer_key.release(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(0)); + + layer_key.press(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(1)); + layer_key.release(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(0)); + + layer_key.press(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(1)); + layer_key.release(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(0)); + + layer_key.press(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(1)); + layer_key.release(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(0)); + + layer_key.press(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(1)); + layer_key.release(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(1)); + + testing::Mock::VerifyAndClearExpectations(&driver); + + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_B))).Times(1); + regular_key.press(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(1)); + testing::Mock::VerifyAndClearExpectations(&driver); + + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + regular_key.release(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(1)); + testing::Mock::VerifyAndClearExpectations(&driver); } -// TEST_F(ActionLayer, LayerClear) { -// layer_clear(); -// EXPECT_EQ(layer_state, 0); -// } - -// TEST_F(ActionLayer, LayerMove) { -// layer_move(0); -// EXPECT_EQ(layer_state, 1); -// layer_move(3); -// EXPECT_EQ(layer_state, 0b1000); -// } - -// TEST_F(ActionLayer, LayerOn) { -// layer_clear(); -// layer_on(1); -// layer_on(3); -// layer_on(3); -// EXPECT_EQ(layer_state, 0b1010); -// } - -// TEST_F(ActionLayer, LayerOff) { -// layer_clear(); -// layer_on(1); -// layer_on(3); -// layer_off(3); -// layer_off(2); -// EXPECT_EQ(layer_state, 0b1000); -// } +TEST_F(ActionLayer, LayerTapReleasedBeforeKeypressReleaseWithModifiers) { + GTEST_SKIP() << "TODO: Modifiers are erroneously discarded on layer changes, although a key that introduced the modifier is still held."; + TestDriver driver; + InSequence s; + + KeymapKey layer_0_key_0 = KeymapKey{0, 0, 0, LT(1, KC_T)}; + KeymapKey layer_1_key_1 = KeymapKey{1, 1, 0, RALT(KC_9)}; + + set_keymap({layer_0_key_0, layer_1_key_1}); + + /* Press layer tap and wait for tapping term to switch to layer 1 */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(0); + layer_0_key_0.press(); + idle_for(TAPPING_TERM); + EXPECT_TRUE(layer_state_is(0)); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press key with layer 1 mapping, result basically expected + * altough more reports are send then necessary. */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RALT))).Times(1); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RALT, KC_9))).Times(1); + layer_1_key_1.press(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(1)); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release layer tap key, no report is send because key is still held. */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + layer_0_key_0.release(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(0)); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Unregister keycode and modifier. */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RALT))).Times(1); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + layer_1_key_1.release(); + run_one_scan_loop(); + EXPECT_TRUE(layer_state_is(0)); + testing::Mock::VerifyAndClearExpectations(&driver); +} diff --git a/tests/basic/test_keypress.cpp b/tests/basic/test_keypress.cpp index cf839f8c16..1c175c9d56 100644 --- a/tests/basic/test_keypress.cpp +++ b/tests/basic/test_keypress.cpp @@ -14,11 +14,11 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ +#include "keycode.h" #include "test_common.hpp" using testing::_; using testing::InSequence; -using testing::Return; class KeyPress : public TestFixture {}; @@ -30,96 +30,157 @@ TEST_F(KeyPress, SendKeyboardIsNotCalledWhenNoKeyIsPressed) { TEST_F(KeyPress, CorrectKeyIsReportedWhenPressed) { TestDriver driver; - press_key(0, 0); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_A))); + auto key = KeymapKey(0, 0, 0, KC_A); + + set_keymap({key}); + + key.press(); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(key.report_code))); keyboard_task(); - release_key(0, 0); + + key.release(); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); keyboard_task(); } +TEST_F(KeyPress, ANonMappedKeyDoesNothing) { + TestDriver driver; + auto key = KeymapKey(0, 0, 0, KC_NO); + + set_keymap({key}); + + key.press(); + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + keyboard_task(); + keyboard_task(); +} + TEST_F(KeyPress, CorrectKeysAreReportedWhenTwoKeysArePressed) { TestDriver driver; - press_key(1, 0); - press_key(0, 3); + auto key_b = KeymapKey(0, 0, 0, KC_B); + auto key_c = KeymapKey(0, 1, 1, KC_C); + + set_keymap({key_b, key_c}); + + key_b.press(); + key_c.press(); // Note that QMK only processes one key at a time // See issue #1476 for more information - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_B))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(key_b.report_code))); keyboard_task(); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_B, KC_C))); + + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(key_b.report_code, key_c.report_code))); keyboard_task(); - release_key(1, 0); - release_key(0, 3); + + key_b.release(); + key_c.release(); // Note that the first key released is the first one in the matrix order - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_C))); - keyboard_task(); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(key_c.report_code))); keyboard_task(); -} -TEST_F(KeyPress, ANonMappedKeyDoesNothing) { - TestDriver driver; - press_key(2, 0); - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); - keyboard_task(); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); keyboard_task(); } TEST_F(KeyPress, LeftShiftIsReportedCorrectly) { TestDriver driver; - press_key(3, 0); - press_key(0, 0); + auto key_a = KeymapKey(0, 0, 0, KC_A); + auto key_lsft = KeymapKey(0, 3, 0, KC_LSFT); + + set_keymap({key_a, key_lsft}); + + key_lsft.press(); + key_a.press(); + // Unfortunately modifiers are also processed in the wrong order // See issue #1476 for more information - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_A))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(key_a.report_code))); keyboard_task(); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_A, KC_LEFT_SHIFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(key_a.report_code, key_lsft.report_code))); keyboard_task(); - release_key(0, 0); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); + + key_a.release(); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(key_lsft.report_code))); keyboard_task(); - release_key(3, 0); + + key_lsft.release(); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); keyboard_task(); } TEST_F(KeyPress, PressLeftShiftAndControl) { TestDriver driver; - press_key(3, 0); - press_key(5, 0); + auto key_lsft = KeymapKey(0, 3, 0, KC_LSFT); + auto key_lctrl = KeymapKey(0, 5, 0, KC_LCTRL); + + set_keymap({key_lctrl, key_lsft}); + + key_lsft.press(); + key_lctrl.press(); + // Unfortunately modifiers are also processed in the wrong order // See issue #1476 for more information - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(key_lsft.report_code))); + keyboard_task(); + + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(key_lsft.report_code, key_lctrl.report_code))); keyboard_task(); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT, KC_LEFT_CTRL))); + + key_lsft.release(); + key_lctrl.release(); + + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(key_lctrl.report_code))); + keyboard_task(); + + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); keyboard_task(); } TEST_F(KeyPress, LeftAndRightShiftCanBePressedAtTheSameTime) { TestDriver driver; - press_key(3, 0); - press_key(4, 0); + auto key_lsft = KeymapKey(0, 3, 0, KC_LSFT); + auto key_rsft = KeymapKey(0, 4, 0, KC_RSFT); + + set_keymap({key_rsft, key_lsft}); + + key_lsft.press(); + key_rsft.press(); // Unfortunately modifiers are also processed in the wrong order // See issue #1476 for more information - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(key_lsft.report_code))); keyboard_task(); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT, KC_RIGHT_SHIFT))); + + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(key_lsft.report_code, key_rsft.report_code))); + keyboard_task(); + + key_lsft.release(); + key_rsft.release(); + + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(key_rsft.report_code))); + keyboard_task(); + + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); keyboard_task(); } TEST_F(KeyPress, RightShiftLeftControlAndCharWithTheSameKey) { TestDriver driver; - press_key(6, 0); + auto combo_key = KeymapKey(0, 0, 0, RSFT(LCTL(KC_O))); + + set_keymap({combo_key}); + // BUG: The press is split into two reports // BUG: It reports RSFT instead of LSFT // See issue #524 for more information // The underlying cause is that we use only one bit to represent the right hand // modifiers. - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RIGHT_SHIFT, KC_RIGHT_CTRL))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RIGHT_SHIFT, KC_RIGHT_CTRL, KC_O))); + combo_key.press(); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RSFT, KC_RCTRL))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RSFT, KC_RCTRL, KC_O))); keyboard_task(); - release_key(6, 0); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RIGHT_SHIFT, KC_RIGHT_CTRL))); + + combo_key.release(); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_RSFT, KC_RCTRL))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); keyboard_task(); } @@ -127,25 +188,29 @@ TEST_F(KeyPress, RightShiftLeftControlAndCharWithTheSameKey) { TEST_F(KeyPress, PressPlusEqualReleaseBeforePress) { TestDriver driver; InSequence s; + auto key_plus = KeymapKey(0, 1, 1, KC_PLUS); + auto key_eql = KeymapKey(0, 0, 1, KC_EQL); - press_key(1, 1); // KC_PLUS - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT, KC_EQUAL))); + set_keymap({key_plus, key_eql}); + + key_plus.press(); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_EQL))); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - release_key(1, 1); // KC_PLUS - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); + key_plus.release(); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - press_key(0, 1); // KC_EQUAL - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_EQUAL))); + key_eql.press(); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(key_eql.report_code))); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - release_key(0, 1); // KC_EQUAL + key_eql.release(); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); @@ -154,27 +219,31 @@ TEST_F(KeyPress, PressPlusEqualReleaseBeforePress) { TEST_F(KeyPress, PressPlusEqualDontReleaseBeforePress) { TestDriver driver; InSequence s; + auto key_plus = KeymapKey(0, 1, 1, KC_PLUS); + auto key_eql = KeymapKey(0, 0, 1, KC_EQL); - press_key(1, 1); // KC_PLUS - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT, KC_EQUAL))); + set_keymap({key_plus, key_eql}); + + key_plus.press(); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_EQL))); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - press_key(0, 1); // KC_EQUAL + key_eql.press(); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_EQUAL))); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - release_key(1, 1); // KC_PLUS - // BUG: Should really still return KC_EQUAL, but this is fine too + key_plus.release(); + // BUG: Should really still return KC_EQL, but this is fine too // It's also called twice for some reason EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(2); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - release_key(0, 1); // KC_EQUAL + key_eql.release(); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); @@ -183,25 +252,29 @@ TEST_F(KeyPress, PressPlusEqualDontReleaseBeforePress) { TEST_F(KeyPress, PressEqualPlusReleaseBeforePress) { TestDriver driver; InSequence s; + auto key_plus = KeymapKey(0, 1, 1, KC_PLUS); + auto key_eql = KeymapKey(0, 0, 1, KC_EQL); - press_key(0, 1); // KC_EQUAL - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_EQUAL))); + set_keymap({key_plus, key_eql}); + + key_eql.press(); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_EQL))); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - release_key(0, 1); // KC_EQUAL + key_eql.release(); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - press_key(1, 1); // KC_PLUS - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT, KC_EQUAL))); + key_plus.press(); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_EQL))); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - release_key(1, 1); // KC_PLUS - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); + key_plus.release(); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); @@ -210,13 +283,17 @@ TEST_F(KeyPress, PressEqualPlusReleaseBeforePress) { TEST_F(KeyPress, PressEqualPlusDontReleaseBeforePress) { TestDriver driver; InSequence s; + auto key_plus = KeymapKey(0, 1, 1, KC_PLUS); + auto key_eql = KeymapKey(0, 0, 1, KC_EQL); - press_key(0, 1); // KC_EQUAL - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_EQUAL))); + set_keymap({key_plus, key_eql}); + + key_eql.press(); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_EQL))); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - press_key(1, 1); // KC_PLUS + key_plus.press(); // BUG: The sequence is a bit strange, but it works, the end result is that // KC_PLUS is sent EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT, KC_EQUAL))); @@ -225,16 +302,16 @@ TEST_F(KeyPress, PressEqualPlusDontReleaseBeforePress) { run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - release_key(0, 1); // KC_EQUAL + key_eql.release(); // I guess it's fine to still report shift here EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); - release_key(1, 1); // KC_PLUS + key_plus.release(); // This report is not needed EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); run_one_scan_loop(); testing::Mock::VerifyAndClearExpectations(&driver); -} +} \ No newline at end of file diff --git a/tests/basic/test_macro.cpp b/tests/basic/test_macro.cpp index 1ac6f473fc..ae2f3b32e3 100644 --- a/tests/basic/test_macro.cpp +++ b/tests/basic/test_macro.cpp @@ -24,10 +24,25 @@ class Macro : public TestFixture {}; #define AT_TIME(t) WillOnce(InvokeWithoutArgs([current_time]() { EXPECT_EQ(timer_elapsed32(current_time), t); })) +extern "C" const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) { + if (record->event.pressed) { + switch (id) { + case 0: + return MACRO(D(LSFT), T(H), U(LSFT), T(E), T(L), T(L), T(O), T(SPACE), W(100), D(LSFT), T(W), U(LSFT), I(10), T(O), T(R), T(L), T(D), D(LSFT), T(1), U(LSFT), END); + } + } + return MACRO_NONE; +}; + TEST_F(Macro, PlayASimpleMacro) { TestDriver driver; InSequence s; - press_key(8, 0); + auto key_macro = KeymapKey(0, 8, 0, M(0)); + + set_keymap({key_macro}); + + key_macro.press(); + uint32_t current_time = timer_read32(); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))).AT_TIME(0); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT, KC_H))).AT_TIME(0); @@ -68,4 +83,6 @@ TEST_F(Macro, PlayASimpleMacro) { EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))).AT_TIME(210); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).AT_TIME(220); run_one_scan_loop(); + + key_macro.release(); } diff --git a/tests/basic/test_one_shot_keys.cpp b/tests/basic/test_one_shot_keys.cpp new file mode 100644 index 0000000000..98178912e4 --- /dev/null +++ b/tests/basic/test_one_shot_keys.cpp @@ -0,0 +1,197 @@ +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "action_util.h" +#include "keyboard_report_util.hpp" +#include "test_common.hpp" + +using testing::_; +using testing::InSequence; + +class OneShot : public TestFixture {}; +class OneShotParametrizedTestFixture : public ::testing::WithParamInterface<std::pair<KeymapKey, KeymapKey>>, public OneShot {}; + +TEST_F(OneShot, OSMWithoutAdditionalKeypressDoesNothing) { + TestDriver driver; + auto osm_key = KeymapKey(0, 0, 0, OSM(MOD_LSFT), KC_LSFT); + + set_keymap({osm_key}); + + /* Press and release OSM key*/ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + osm_key.press(); + run_one_scan_loop(); + osm_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* OSM are added when an actual report is send */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(osm_key.report_code))); + send_keyboard_report(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Make unit-test pass */ + clear_oneshot_mods(); +} + +#if defined(ONESHOT_TIMEOUT) + +TEST_P(OneShotParametrizedTestFixture, OSMExpiredDoesNothing) { + TestDriver driver; + KeymapKey osm_key = GetParam().first; + KeymapKey regular_key = GetParam().second; + + set_keymap({osm_key, regular_key}); + + /* Press and release OSM */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + osm_key.press(); + run_one_scan_loop(); + osm_key.release(); + idle_for(ONESHOT_TIMEOUT); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press regular key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(regular_key.report_code))).Times(1); + regular_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release regular key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + regular_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +#endif + +TEST_P(OneShotParametrizedTestFixture, OSMWithAdditionalKeypress) { + TestDriver driver; + KeymapKey osm_key = GetParam().first; + KeymapKey regular_key = GetParam().second; + + set_keymap({osm_key, regular_key}); + + /* Press and release OSM */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + osm_key.press(); + run_one_scan_loop(); + osm_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press regular key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(osm_key.report_code, regular_key.report_code))).Times(1); + regular_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release regular key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + regular_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_P(OneShotParametrizedTestFixture, OSMAsRegularModifierWithAdditionalKeypress) { + TestDriver driver; + testing::InSequence s; + + KeymapKey osm_key = GetParam().first; + KeymapKey regular_key = GetParam().second; + + set_keymap({osm_key, regular_key}); + + /* Press OSM */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + osm_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press regular key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + regular_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release regular key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + regular_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release OSM */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(regular_key.report_code, osm_key.report_code))).Times(1); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + osm_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +// clang-format off + +INSTANTIATE_TEST_CASE_P( + OneShotModifierTests, + OneShotParametrizedTestFixture, + ::testing::Values( + /* first is osm key, second is regular key. */ + std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_LSFT), KC_LSFT}, KeymapKey{0, 1, 1, KC_A}), + std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_LCTL), KC_LCTL}, KeymapKey{0, 1, 1, KC_A}), + std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_LALT), KC_LALT}, KeymapKey{0, 1, 1, KC_A}), + std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_LGUI), KC_LGUI}, KeymapKey{0, 1, 1, KC_A}), + std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_RCTL), KC_RCTL}, KeymapKey{0, 1, 1, KC_A}), + std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_RSFT), KC_RSFT}, KeymapKey{0, 1, 1, KC_A}), + std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_RALT), KC_RALT}, KeymapKey{0, 1, 1, KC_A}), + std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_RGUI), KC_RGUI}, KeymapKey{0, 1, 1, KC_A}) + )); +// clang-format on + +TEST_F(OneShot, OSLWithAdditionalKeypress) { + TestDriver driver; + InSequence s; + KeymapKey osl_key = KeymapKey{0, 0, 0, OSL(1)}; + KeymapKey regular_key = KeymapKey{1, 1, 0, KC_A}; + + set_keymap({osl_key, regular_key}); + + /* Press OSL key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + osl_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release OSL key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(2); + osl_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press regular key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(regular_key.report_code))).Times(2); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + regular_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release regular key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + regular_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} diff --git a/tests/basic/test_tapping.cpp b/tests/basic/test_tapping.cpp index 88ab97eb6e..e4a7e4a9f3 100644 --- a/tests/basic/test_tapping.cpp +++ b/tests/basic/test_tapping.cpp @@ -14,8 +14,11 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ +#include "keyboard_report_util.hpp" +#include "keycode.h" #include "test_common.hpp" #include "action_tapping.h" +#include "test_keymap_key.hpp" using testing::_; using testing::InSequence; @@ -25,14 +28,19 @@ class Tapping : public TestFixture {}; TEST_F(Tapping, TapA_SHFT_T_KeyReportsKey) { TestDriver driver; InSequence s; + auto key_shift_hold_p_tap = KeymapKey(0, 7, 0, SFT_T(KC_P)); + + set_keymap({key_shift_hold_p_tap}); - press_key(7, 0); // Tapping keys does nothing on press + key_shift_hold_p_tap.press(); EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); run_one_scan_loop(); - release_key(7, 0); + // First we get the key press + key_shift_hold_p_tap.release(); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + // Then the release EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); run_one_scan_loop(); @@ -41,12 +49,21 @@ TEST_F(Tapping, TapA_SHFT_T_KeyReportsKey) { TEST_F(Tapping, HoldA_SHFT_T_KeyReportsShift) { TestDriver driver; InSequence s; + auto mod_tap_hold_key = KeymapKey(0, 7, 0, SFT_T(KC_P)); + + set_keymap({mod_tap_hold_key}); + + mod_tap_hold_key.press(); - press_key(7, 0); // Tapping keys does nothing on press EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); idle_for(TAPPING_TERM); - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))); + + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); + run_one_scan_loop(); + + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + mod_tap_hold_key.release(); run_one_scan_loop(); } @@ -54,12 +71,16 @@ TEST_F(Tapping, ANewTapWithinTappingTermIsBuggy) { // See issue #1478 for more information TestDriver driver; InSequence s; + auto key_shift_hold_p_tap = KeymapKey(0, 7, 0, SFT_T(KC_P)); + + set_keymap({key_shift_hold_p_tap}); - press_key(7, 0); // Tapping keys does nothing on press + key_shift_hold_p_tap.press(); EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); run_one_scan_loop(); - release_key(7, 0); + key_shift_hold_p_tap.release(); + // First we get the key press EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); // Then the release @@ -67,19 +88,20 @@ TEST_F(Tapping, ANewTapWithinTappingTermIsBuggy) { run_one_scan_loop(); // This sends KC_P, even if it should do nothing - press_key(7, 0); + key_shift_hold_p_tap.press(); // This test should not succed if everything works correctly EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); run_one_scan_loop(); - release_key(7, 0); + + key_shift_hold_p_tap.release(); EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); idle_for(TAPPING_TERM + 1); // On the other hand, nothing is sent if we are outside the tapping term - press_key(7, 0); + key_shift_hold_p_tap.press(); EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); run_one_scan_loop(); - release_key(7, 0); + key_shift_hold_p_tap.release(); // First we get the key press EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); @@ -90,8 +112,12 @@ TEST_F(Tapping, ANewTapWithinTappingTermIsBuggy) { // Now we are geting into strange territory, as the hold registers too early here // But the stranges part is: // If TAPPING_TERM + 1 above is changed to TAPPING_TERM or TAPPING_TERM + 2 it doesn't - press_key(7, 0); + key_shift_hold_p_tap.press(); // Shouldn't be called here really EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LEFT_SHIFT))).Times(1); idle_for(TAPPING_TERM); -} + + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + key_shift_hold_p_tap.release(); + run_one_scan_loop(); +} \ No newline at end of file diff --git a/tests/tap_hold_configurations/default_mod_tap/config.h b/tests/tap_hold_configurations/default_mod_tap/config.h new file mode 100644 index 0000000000..5955b8600a --- /dev/null +++ b/tests/tap_hold_configurations/default_mod_tap/config.h @@ -0,0 +1,21 @@ +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "test_common.h" + +#define IGNORE_MOD_TAP_INTERRUPT \ No newline at end of file diff --git a/tests/tap_hold_configurations/default_mod_tap/test.mk b/tests/tap_hold_configurations/default_mod_tap/test.mk new file mode 100644 index 0000000000..cfab996e0e --- /dev/null +++ b/tests/tap_hold_configurations/default_mod_tap/test.mk @@ -0,0 +1,18 @@ +# Copyright 2021 Stefan Kerkmann +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# -------------------------------------------------------------------------------- +# Keep this file, even if it is empty, as a marker that this folder contains tests +# -------------------------------------------------------------------------------- \ No newline at end of file diff --git a/tests/tap_hold_configurations/default_mod_tap/test_tap_hold.cpp b/tests/tap_hold_configurations/default_mod_tap/test_tap_hold.cpp new file mode 100644 index 0000000000..90befcdffd --- /dev/null +++ b/tests/tap_hold_configurations/default_mod_tap/test_tap_hold.cpp @@ -0,0 +1,230 @@ +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "keyboard_report_util.hpp" +#include "keycode.h" +#include "test_common.hpp" +#include "action_tapping.h" +#include "test_fixture.hpp" +#include "test_keymap_key.hpp" + +using testing::_; +using testing::InSequence; + +class DefaultTapHold : public TestFixture {}; + +TEST_F(DefaultTapHold, tap_regular_key_while_mod_tap_key_is_held) { + TestDriver driver; + InSequence s; + auto mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); + auto regular_key = KeymapKey(0, 2, 0, KC_A); + + set_keymap({mod_tap_hold_key, regular_key}); + + /* Press mod-tap-hold key. */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + mod_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press regular key. */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + regular_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release regular key. */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + regular_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release mod-tap-hold key. */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P, KC_A))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Idle for tapping term of mod tap hold key. */ + idle_for(TAPPING_TERM - 3); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(DefaultTapHold, tap_mod_tap_key_while_mod_tap_key_is_held) { + TestDriver driver; + InSequence s; + auto first_mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); + auto second_mod_tap_hold_key = KeymapKey(0, 2, 0, RSFT_T(KC_A)); + + set_keymap({first_mod_tap_hold_key, second_mod_tap_hold_key}); + + /* Press first mod-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + first_mod_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press second tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + second_mod_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release second tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + second_mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release first mod-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P, KC_A))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + first_mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(DefaultTapHold, tap_regular_key_while_layer_tap_key_is_held) { + TestDriver driver; + InSequence s; + auto layer_tap_hold_key = KeymapKey(0, 1, 0, LT(1, KC_P)); + auto regular_key = KeymapKey(0, 2, 0, KC_A); + auto layer_key = KeymapKey(1, 2, 0, KC_B); + + set_keymap({layer_tap_hold_key, regular_key, layer_key}); + + /* Press layer-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + layer_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press regular key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + regular_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release regular key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + regular_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release layer-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_A, KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(_)); + layer_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(DefaultTapHold, tap_mod_tap_hold_key_two_times) { + GTEST_SKIP() << "TODO:Holding a modtap key results in out of bounds access to the keymap, this is a bug in QMK."; + + TestDriver driver; + InSequence s; + auto mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); + + set_keymap({mod_tap_hold_key}); + + /* Press mod-tap-hold key. */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + mod_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release mod-tap-hold key. */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press mod-tap-hold key again. */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + mod_tap_hold_key.press(); + idle_for(TAPPING_TERM); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release mod-tap-hold key. */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(DefaultTapHold, tap_mod_tap_hold_key_twice_and_hold_on_second_time) { + GTEST_SKIP() << "TODO:Holding a modtap key results in out of bounds access to the keymap, this is a bug in QMK."; + + TestDriver driver; + InSequence s; + auto mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); + + set_keymap({mod_tap_hold_key}); + + /* Press mod-tap-hold key. */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + mod_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release mod-tap-hold key. */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press mod-tap-hold key again. */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + mod_tap_hold_key.press(); + idle_for(TAPPING_TERM); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release mod-tap-hold key. */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(DefaultTapHold, tap_and_hold_mod_tap_hold_key) { + TestDriver driver; + InSequence s; + auto mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); + + set_keymap({mod_tap_hold_key}); + + /* Press mod-tap-hold key. */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSHIFT))); + mod_tap_hold_key.press(); + idle_for(TAPPING_TERM + 1); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release mod-tap-hold key. */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} \ No newline at end of file diff --git a/tests/tap_hold_configurations/ignore_mod_tap_interrupt/config.h b/tests/tap_hold_configurations/ignore_mod_tap_interrupt/config.h new file mode 100644 index 0000000000..5955b8600a --- /dev/null +++ b/tests/tap_hold_configurations/ignore_mod_tap_interrupt/config.h @@ -0,0 +1,21 @@ +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "test_common.h" + +#define IGNORE_MOD_TAP_INTERRUPT \ No newline at end of file diff --git a/tests/tap_hold_configurations/ignore_mod_tap_interrupt/test.mk b/tests/tap_hold_configurations/ignore_mod_tap_interrupt/test.mk new file mode 100644 index 0000000000..efecca2c22 --- /dev/null +++ b/tests/tap_hold_configurations/ignore_mod_tap_interrupt/test.mk @@ -0,0 +1,18 @@ +# Copyright 2021 Stefan Kerkmann +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# -------------------------------------------------------------------------------- +# Keep this file, even if it is empty, as a marker that this folder contains tests +# -------------------------------------------------------------------------------- diff --git a/tests/tap_hold_configurations/ignore_mod_tap_interrupt/test_tap_hold.cpp b/tests/tap_hold_configurations/ignore_mod_tap_interrupt/test_tap_hold.cpp new file mode 100644 index 0000000000..1702d604d3 --- /dev/null +++ b/tests/tap_hold_configurations/ignore_mod_tap_interrupt/test_tap_hold.cpp @@ -0,0 +1,136 @@ +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "keyboard_report_util.hpp" +#include "keycode.h" +#include "test_common.hpp" +#include "action_tapping.h" +#include "test_fixture.hpp" +#include "test_keymap_key.hpp" + +using testing::_; +using testing::InSequence; + +class IgnoreModTapInterrupt : public TestFixture {}; + +TEST_F(IgnoreModTapInterrupt, tap_regular_key_while_mod_tap_key_is_held) { + TestDriver driver; + InSequence s; + auto mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); + auto regular_key = KeymapKey(0, 2, 0, KC_A); + + set_keymap({mod_tap_hold_key, regular_key}); + + /* Press mod-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + mod_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press regular key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + regular_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release regular key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + regular_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release mod-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_A, KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(IgnoreModTapInterrupt, tap_mod_tap_key_while_mod_tap_key_is_held) { + TestDriver driver; + InSequence s; + auto first_mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); + auto second_mod_tap_hold_key = KeymapKey(0, 2, 0, RSFT_T(KC_A)); + + set_keymap({first_mod_tap_hold_key, second_mod_tap_hold_key}); + + /* Press first mod-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + first_mod_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press second tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + second_mod_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release second tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + second_mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release first mod-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_A, KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + first_mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(IgnoreModTapInterrupt, tap_regular_key_while_layer_tap_key_is_held) { + TestDriver driver; + InSequence s; + auto layer_tap_hold_key = KeymapKey(0, 1, 0, LT(1, KC_P)); + auto regular_key = KeymapKey(0, 2, 0, KC_A); + auto layer_key = KeymapKey(1, 2, 0, KC_B); + + set_keymap({layer_tap_hold_key, regular_key, layer_key}); + + /* Press layer-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + layer_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press regular key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + regular_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release regular key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + regular_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release layer-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P, regular_key.report_code))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + layer_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} diff --git a/tests/tap_hold_configurations/permissive_hold/config.h b/tests/tap_hold_configurations/permissive_hold/config.h new file mode 100644 index 0000000000..2d5a9849e7 --- /dev/null +++ b/tests/tap_hold_configurations/permissive_hold/config.h @@ -0,0 +1,21 @@ +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "test_common.h" + +#define PERMISSIVE_HOLD \ No newline at end of file diff --git a/tests/tap_hold_configurations/permissive_hold/test.mk b/tests/tap_hold_configurations/permissive_hold/test.mk new file mode 100644 index 0000000000..efecca2c22 --- /dev/null +++ b/tests/tap_hold_configurations/permissive_hold/test.mk @@ -0,0 +1,18 @@ +# Copyright 2021 Stefan Kerkmann +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# -------------------------------------------------------------------------------- +# Keep this file, even if it is empty, as a marker that this folder contains tests +# -------------------------------------------------------------------------------- diff --git a/tests/tap_hold_configurations/permissive_hold/test_one_shot_keys.cpp b/tests/tap_hold_configurations/permissive_hold/test_one_shot_keys.cpp new file mode 100644 index 0000000000..aa71ec397f --- /dev/null +++ b/tests/tap_hold_configurations/permissive_hold/test_one_shot_keys.cpp @@ -0,0 +1,76 @@ +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "action_util.h" +#include "keyboard_report_util.hpp" +#include "test_common.hpp" + +using testing::_; +using testing::InSequence; + +class OneShot : public TestFixture {}; +class OneShotParametrizedTestFixture : public ::testing::WithParamInterface<std::pair<KeymapKey, KeymapKey>>, public OneShot {}; + +TEST_P(OneShotParametrizedTestFixture, OSMAsRegularModifierWithAdditionalKeypress) { + TestDriver driver; + KeymapKey osm_key = GetParam().first; + KeymapKey regular_key = GetParam().second; + + set_keymap({osm_key, regular_key}); + + /* Press OSM */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + osm_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press regular key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + regular_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release regular key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(osm_key.report_code))).Times(2); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(regular_key.report_code, osm_key.report_code))).Times(1); + regular_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release OSM */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + osm_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +// clang-format off + +INSTANTIATE_TEST_CASE_P( + OneShotModifierTests, + OneShotParametrizedTestFixture, + ::testing::Values( + /* first is osm key, second is regular key. */ + std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_LSFT), KC_LSFT}, KeymapKey{0, 1, 1, KC_A}), + std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_LCTL), KC_LCTL}, KeymapKey{0, 1, 1, KC_A}), + std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_LALT), KC_LALT}, KeymapKey{0, 1, 1, KC_A}), + std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_LGUI), KC_LGUI}, KeymapKey{0, 1, 1, KC_A}), + std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_RCTL), KC_RCTL}, KeymapKey{0, 1, 1, KC_A}), + std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_RSFT), KC_RSFT}, KeymapKey{0, 1, 1, KC_A}), + std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_RALT), KC_RALT}, KeymapKey{0, 1, 1, KC_A}), + std::make_pair(KeymapKey{0, 0, 0, OSM(MOD_RGUI), KC_RGUI}, KeymapKey{0, 1, 1, KC_A}) + )); +// clang-format on \ No newline at end of file diff --git a/tests/tap_hold_configurations/permissive_hold/test_tap_hold.cpp b/tests/tap_hold_configurations/permissive_hold/test_tap_hold.cpp new file mode 100644 index 0000000000..ab9dd1518b --- /dev/null +++ b/tests/tap_hold_configurations/permissive_hold/test_tap_hold.cpp @@ -0,0 +1,132 @@ +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "keyboard_report_util.hpp" +#include "keycode.h" +#include "test_common.hpp" +#include "action_tapping.h" +#include "test_fixture.hpp" +#include "test_keymap_key.hpp" + +using testing::_; +using testing::InSequence; +class PermissiveHold : public TestFixture {}; + +TEST_F(PermissiveHold, tap_regular_key_while_mod_tap_key_is_held) { + TestDriver driver; + InSequence s; + auto mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); + auto regular_key = KeymapKey(0, 2, 0, KC_A); + + set_keymap({mod_tap_hold_key, regular_key}); + + /* Press mod-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + mod_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press regular key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + regular_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release regular key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSHIFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSHIFT, regular_key.report_code))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSHIFT))); + regular_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release mod-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(PermissiveHold, tap_mod_tap_key_while_mod_tap_key_is_held) { + TestDriver driver; + InSequence s; + auto first_mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); + auto second_mod_tap_hold_key = KeymapKey(0, 2, 0, RSFT_T(KC_A)); + + set_keymap({first_mod_tap_hold_key, second_mod_tap_hold_key}); + + /* Press first mod-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + first_mod_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press second mod-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + second_mod_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release second mod-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSHIFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSHIFT, second_mod_tap_hold_key.report_code))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSHIFT))); + second_mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release first mod-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + first_mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(PermissiveHold, tap_regular_key_while_layer_tap_key_is_held) { + TestDriver driver; + InSequence s; + auto layer_tap_hold_key = KeymapKey(0, 1, 0, LT(1, KC_P)); + auto regular_key = KeymapKey(0, 2, 0, KC_A); + auto layer_key = KeymapKey(1, 2, 0, KC_B); + + set_keymap({layer_tap_hold_key, regular_key, layer_key}); + + /* Press layer-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + layer_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press regular key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + regular_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release regular key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(layer_key.report_code))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + regular_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release layer-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + layer_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} \ No newline at end of file diff --git a/tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/config.h b/tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/config.h new file mode 100644 index 0000000000..a6abd50bbe --- /dev/null +++ b/tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/config.h @@ -0,0 +1,22 @@ +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "test_common.h" + +#define IGNORE_MOD_TAP_INTERRUPT +#define PERMISSIVE_HOLD \ No newline at end of file diff --git a/tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/test.mk b/tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/test.mk new file mode 100644 index 0000000000..efecca2c22 --- /dev/null +++ b/tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/test.mk @@ -0,0 +1,18 @@ +# Copyright 2021 Stefan Kerkmann +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# -------------------------------------------------------------------------------- +# Keep this file, even if it is empty, as a marker that this folder contains tests +# -------------------------------------------------------------------------------- diff --git a/tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/test_tap_hold.cpp b/tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/test_tap_hold.cpp new file mode 100644 index 0000000000..67f394653f --- /dev/null +++ b/tests/tap_hold_configurations/permissive_hold_ignore_mod_tap_interrupt/test_tap_hold.cpp @@ -0,0 +1,134 @@ + +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "keyboard_report_util.hpp" +#include "keycode.h" +#include "test_common.hpp" +#include "action_tapping.h" +#include "test_fixture.hpp" +#include "test_keymap_key.hpp" + +using testing::_; +using testing::InSequence; + +class PermissiveHold_IgnoreModTapInterrupt : public TestFixture {}; + +TEST_F(PermissiveHold_IgnoreModTapInterrupt, tap_regular_key_while_mod_tap_key_is_held) { + TestDriver driver; + InSequence s; + auto mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); + auto regular_key = KeymapKey(0, 2, 0, KC_A); + + set_keymap({mod_tap_hold_key, regular_key}); + + /* Press mod-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + mod_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press regular key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + regular_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release regular key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_A))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); + regular_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release mod-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(PermissiveHold_IgnoreModTapInterrupt, tap_mod_tap_key_while_mod_tap_key_is_held) { + TestDriver driver; + InSequence s; + auto first_mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); + auto second_mod_tap_hold_key = KeymapKey(0, 2, 0, RSFT_T(KC_A)); + + set_keymap({first_mod_tap_hold_key, second_mod_tap_hold_key}); + + /* Press first mod-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + first_mod_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press second tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + second_mod_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release second tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_A))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); + second_mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release first mod-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + first_mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(PermissiveHold_IgnoreModTapInterrupt, tap_regular_key_while_layer_tap_key_is_held) { + TestDriver driver; + InSequence s; + auto layer_tap_hold_key = KeymapKey(0, 1, 0, LT(1, KC_P)); + auto regular_key = KeymapKey(0, 2, 0, KC_A); + auto layer_key = KeymapKey(1, 2, 0, KC_B); + + set_keymap({layer_tap_hold_key, regular_key, layer_key}); + + /* Press layer-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + layer_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press regular key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + regular_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release regular key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_B))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + regular_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release layer-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + layer_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} \ No newline at end of file diff --git a/tests/tap_hold_configurations/retro_tapping/config.h b/tests/tap_hold_configurations/retro_tapping/config.h new file mode 100644 index 0000000000..4b38f2644b --- /dev/null +++ b/tests/tap_hold_configurations/retro_tapping/config.h @@ -0,0 +1,21 @@ +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "test_common.h" + +#define RETRO_TAPPING \ No newline at end of file diff --git a/tests/tap_hold_configurations/retro_tapping/test.mk b/tests/tap_hold_configurations/retro_tapping/test.mk new file mode 100644 index 0000000000..efecca2c22 --- /dev/null +++ b/tests/tap_hold_configurations/retro_tapping/test.mk @@ -0,0 +1,18 @@ +# Copyright 2021 Stefan Kerkmann +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# -------------------------------------------------------------------------------- +# Keep this file, even if it is empty, as a marker that this folder contains tests +# -------------------------------------------------------------------------------- diff --git a/tests/tap_hold_configurations/retro_tapping/test_tap_hold.cpp b/tests/tap_hold_configurations/retro_tapping/test_tap_hold.cpp new file mode 100644 index 0000000000..59ae77f781 --- /dev/null +++ b/tests/tap_hold_configurations/retro_tapping/test_tap_hold.cpp @@ -0,0 +1,52 @@ + +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "keyboard_report_util.hpp" +#include "keycode.h" +#include "test_common.hpp" +#include "action_tapping.h" +#include "test_fixture.hpp" +#include "test_keymap_key.hpp" + +using testing::_; +using testing::InSequence; + +class RetroTapping : public TestFixture {}; + +TEST_F(RetroTapping, tap_and_hold_mod_tap_hold_key) { + TestDriver driver; + InSequence s; + auto mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); + + set_keymap({mod_tap_hold_key}); + + /* Press mod-tap-hold key. */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + mod_tap_hold_key.press(); + idle_for(TAPPING_TERM); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release mod-tap-hold key. */ + /* TODO: Why is LSHIFT send at all? */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSHIFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} \ No newline at end of file diff --git a/tests/tap_hold_configurations/retro_tapping/test_tapping.cpp b/tests/tap_hold_configurations/retro_tapping/test_tapping.cpp new file mode 100644 index 0000000000..cf23df8317 --- /dev/null +++ b/tests/tap_hold_configurations/retro_tapping/test_tapping.cpp @@ -0,0 +1,112 @@ +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "keyboard_report_util.hpp" +#include "keycode.h" +#include "test_common.hpp" +#include "action_tapping.h" +#include "test_keymap_key.hpp" + +using testing::_; +using testing::InSequence; + +class Tapping : public TestFixture {}; + +TEST_F(Tapping, HoldA_SHFT_T_KeyReportsShift) { + TestDriver driver; + InSequence s; + auto mod_tap_hold_key = KeymapKey(0, 7, 0, SFT_T(KC_P)); + + set_keymap({mod_tap_hold_key}); + + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + mod_tap_hold_key.press(); + idle_for(TAPPING_TERM); + testing::Mock::VerifyAndClearExpectations(&driver); + + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(Tapping, ANewTapWithinTappingTermIsBuggy) { + TestDriver driver; + InSequence s; + auto key_shift_hold_p_tap = KeymapKey(0, 7, 0, SFT_T(KC_P)); + + set_keymap({key_shift_hold_p_tap}); + + /* Press mod_tap_hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + key_shift_hold_p_tap.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release mod_tap_hold key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + key_shift_hold_p_tap.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press mod_tap_hold key again */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + key_shift_hold_p_tap.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release mod_tap_hold key again */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + key_shift_hold_p_tap.release(); + idle_for(TAPPING_TERM + 1); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press mod_tap_hold key again */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + key_shift_hold_p_tap.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release mod_tap_hold key again */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + key_shift_hold_p_tap.release(); + idle_for(TAPPING_TERM + 1); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press mod_tap_hold key again */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + key_shift_hold_p_tap.press(); + idle_for(TAPPING_TERM); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release mod_tap_hold key again */ + /* TODO: Why is KC_LSFT send? */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + key_shift_hold_p_tap.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} \ No newline at end of file diff --git a/tests/tap_hold_configurations/tapping_force_hold/config.h b/tests/tap_hold_configurations/tapping_force_hold/config.h new file mode 100644 index 0000000000..3b4646338a --- /dev/null +++ b/tests/tap_hold_configurations/tapping_force_hold/config.h @@ -0,0 +1,21 @@ +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "test_common.h" + +#define TAPPING_FORCE_HOLD \ No newline at end of file diff --git a/tests/tap_hold_configurations/tapping_force_hold/test.mk b/tests/tap_hold_configurations/tapping_force_hold/test.mk new file mode 100644 index 0000000000..efecca2c22 --- /dev/null +++ b/tests/tap_hold_configurations/tapping_force_hold/test.mk @@ -0,0 +1,18 @@ +# Copyright 2021 Stefan Kerkmann +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +# -------------------------------------------------------------------------------- +# Keep this file, even if it is empty, as a marker that this folder contains tests +# -------------------------------------------------------------------------------- diff --git a/tests/tap_hold_configurations/tapping_force_hold/test_action_layer.cpp b/tests/tap_hold_configurations/tapping_force_hold/test_action_layer.cpp new file mode 100644 index 0000000000..02416eed73 --- /dev/null +++ b/tests/tap_hold_configurations/tapping_force_hold/test_action_layer.cpp @@ -0,0 +1,81 @@ +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "keyboard_report_util.hpp" +#include "test_common.hpp" + +using testing::_; +using testing::InSequence; + +class ActionLayer : public TestFixture {}; + +TEST_F(ActionLayer, LayerTapToggleWithToggleWithKeypress) { + TestDriver driver; + KeymapKey layer_key = KeymapKey{0, 0, 0, TT(1)}; + + /* These keys must have the same position in the matrix, only the layer is different. */ + KeymapKey regular_key = KeymapKey{0, 1, 0, KC_A}; + set_keymap({layer_key, regular_key, KeymapKey{1, 1, 0, KC_B}}); + + /* Tap TT five times . */ + /* TODO: QMK currently sends an empty report even if nothing needs to be reported to the host! */ + /* TODO: Tapping Force Hold breaks TT */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(10); + + layer_key.press(); + run_one_scan_loop(); + layer_key.release(); + run_one_scan_loop(); + expect_layer_state(0); + + layer_key.press(); + run_one_scan_loop(); + layer_key.release(); + run_one_scan_loop(); + expect_layer_state(0); + + layer_key.press(); + run_one_scan_loop(); + layer_key.release(); + run_one_scan_loop(); + expect_layer_state(0); + + layer_key.press(); + run_one_scan_loop(); + layer_key.release(); + run_one_scan_loop(); + expect_layer_state(0); + + layer_key.press(); + run_one_scan_loop(); + layer_key.release(); + run_one_scan_loop(); + expect_layer_state(0); + + testing::Mock::VerifyAndClearExpectations(&driver); + + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_A))).Times(1); + regular_key.press(); + run_one_scan_loop(); + expect_layer_state(0); + testing::Mock::VerifyAndClearExpectations(&driver); + + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(1); + regular_key.release(); + run_one_scan_loop(); + expect_layer_state(0); + testing::Mock::VerifyAndClearExpectations(&driver); +} \ No newline at end of file diff --git a/tests/tap_hold_configurations/tapping_force_hold/test_tap_hold.cpp b/tests/tap_hold_configurations/tapping_force_hold/test_tap_hold.cpp new file mode 100644 index 0000000000..cb68429617 --- /dev/null +++ b/tests/tap_hold_configurations/tapping_force_hold/test_tap_hold.cpp @@ -0,0 +1,215 @@ + +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "keyboard_report_util.hpp" +#include "keycode.h" +#include "test_common.hpp" +#include "action_tapping.h" +#include "test_fixture.hpp" +#include "test_keymap_key.hpp" + +using testing::_; +using testing::InSequence; + +class TappingForceHold : public TestFixture {}; + +TEST_F(TappingForceHold, tap_regular_key_while_mod_tap_key_is_held) { + TestDriver driver; + InSequence s; + auto mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); + auto regular_key = KeymapKey(0, 2, 0, KC_A); + + set_keymap({mod_tap_hold_key, regular_key}); + + /* Press mod-tap-hold key. */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + mod_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press regular key. */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + regular_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release regular key. */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + regular_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release mod-tap-hold key. */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); + mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Idle for tapping term of mod tap hold key. */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_A))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + idle_for(TAPPING_TERM - 3); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(TappingForceHold, tap_mod_tap_key_while_mod_tap_key_is_held) { + TestDriver driver; + InSequence s; + auto first_mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); + auto second_mod_tap_hold_key = KeymapKey(0, 2, 0, RSFT_T(KC_A)); + + set_keymap({first_mod_tap_hold_key, second_mod_tap_hold_key}); + + /* Press first mod-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + first_mod_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press second tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + second_mod_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release second tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + second_mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release first mod-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); + first_mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Idle for tapping term of first mod tap hold key. */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT, KC_A))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + idle_for(TAPPING_TERM - 3); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(TappingForceHold, tap_regular_key_while_layer_tap_key_is_held) { + TestDriver driver; + InSequence s; + auto layer_tap_hold_key = KeymapKey(0, 1, 0, LT(1, KC_P)); + auto regular_key = KeymapKey(0, 2, 0, KC_A); + auto layer_key = KeymapKey(1, 2, 0, KC_B); + + set_keymap({layer_tap_hold_key, regular_key, layer_key}); + + /* Press layer-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + layer_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press regular key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + regular_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release regular key */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + regular_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release layer-tap-hold key */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_A, KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(_)); + layer_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(TappingForceHold, tap_mod_tap_hold_key_two_times) { + TestDriver driver; + InSequence s; + auto mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); + + set_keymap({mod_tap_hold_key}); + + /* Press mod-tap-hold key. */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + mod_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release mod-tap-hold key. */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press mod-tap-hold key again. */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + mod_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release mod-tap-hold key. */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} + +TEST_F(TappingForceHold, tap_mod_tap_hold_key_twice_and_hold_on_second_time) { + TestDriver driver; + InSequence s; + auto mod_tap_hold_key = KeymapKey(0, 1, 0, SFT_T(KC_P)); + + set_keymap({mod_tap_hold_key}); + + /* Press mod-tap-hold key. */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + mod_tap_hold_key.press(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release mod-tap-hold key. */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_P))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Press mod-tap-hold key again. */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + mod_tap_hold_key.press(); + idle_for(TAPPING_TERM); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Release mod-tap-hold key. */ + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport(KC_LSHIFT))); + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())); + mod_tap_hold_key.release(); + run_one_scan_loop(); + testing::Mock::VerifyAndClearExpectations(&driver); +} diff --git a/tests/basic/rules.mk b/tests/test_common/build.mk similarity index 92% rename from tests/basic/rules.mk rename to tests/test_common/build.mk index 9fb5d43610..aeb3057854 100644 --- a/tests/basic/rules.mk +++ b/tests/test_common/build.mk @@ -1,4 +1,4 @@ -# Copyright 2017 Fred Sundvik +# Copyright 2021 Stefan Kerkmann # # This program is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by @@ -13,4 +13,4 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. -CUSTOM_MATRIX=yes +CUSTOM_MATRIX=yes \ No newline at end of file diff --git a/tests/test_common/keyboard_report_util.cpp b/tests/test_common/keyboard_report_util.cpp index f73cf239e0..e148c76beb 100644 --- a/tests/test_common/keyboard_report_util.cpp +++ b/tests/test_common/keyboard_report_util.cpp @@ -44,16 +44,21 @@ bool operator==(const report_keyboard_t& lhs, const report_keyboard_t& rhs) { return lhs.mods == rhs.mods && lhskeys == rhskeys; } -std::ostream& operator<<(std::ostream& stream, const report_keyboard_t& value) { - stream << "Keyboard report:" << std::endl; - stream << "Mods: " << (uint32_t)value.mods << std::endl; - stream << "Keys: "; +std::ostream& operator<<(std::ostream& stream, const report_keyboard_t& report) { + auto keys = get_keys(report); + // TODO: This should probably print friendly names for the keys - for (uint32_t k : get_keys(value)) { - stream << k << " "; + stream << "Keyboard Report: Mods (" << (uint32_t)report.mods << ") Keys ("; + + for (auto key = keys.cbegin(); key != keys.cend();) { + stream << +(*key); + key++; + if (key != keys.cend()) { + stream << ","; + } } - stream << std::endl; - return stream; + + return stream << ")" << std::endl; } KeyboardReportMatcher::KeyboardReportMatcher(const std::vector<uint8_t>& keys) { diff --git a/tests/test_common/keymap.c b/tests/test_common/keymap.c new file mode 100644 index 0000000000..fc3a56a007 --- /dev/null +++ b/tests/test_common/keymap.c @@ -0,0 +1,33 @@ +/* Copyright 2017 Fred Sundvik + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "quantum.h" + +// clang-format off + +const uint16_t PROGMEM + keymaps[][MATRIX_ROWS][MATRIX_COLS] = + { + [0] = + { + {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO}, + {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO}, + {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO}, + {KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO}, + }, +}; + +// clang-format on diff --git a/tests/test_common/test_common.h b/tests/test_common/test_common.h new file mode 100644 index 0000000000..19ffcddcea --- /dev/null +++ b/tests/test_common/test_common.h @@ -0,0 +1,4 @@ +#pragma once + +#define MATRIX_ROWS 4 +#define MATRIX_COLS 10 \ No newline at end of file diff --git a/tests/test_common/test_driver.cpp b/tests/test_common/test_driver.cpp index 84e249d838..2fa2b6a2e7 100644 --- a/tests/test_common/test_driver.cpp +++ b/tests/test_common/test_driver.cpp @@ -27,7 +27,10 @@ TestDriver::~TestDriver() { m_this = nullptr; } uint8_t TestDriver::keyboard_leds(void) { return m_this->m_leds; } -void TestDriver::send_keyboard(report_keyboard_t* report) { m_this->send_keyboard_mock(*report); } +void TestDriver::send_keyboard(report_keyboard_t* report) { + test_logger.trace() << *report; + m_this->send_keyboard_mock(*report); +} void TestDriver::send_mouse(report_mouse_t* report) { m_this->send_mouse_mock(*report); } diff --git a/tests/test_common/test_driver.hpp b/tests/test_common/test_driver.hpp index f86308df95..f9197b3634 100644 --- a/tests/test_common/test_driver.hpp +++ b/tests/test_common/test_driver.hpp @@ -20,25 +20,26 @@ #include <stdint.h> #include "host.h" #include "keyboard_report_util.hpp" - +#include "test_logger.hpp" class TestDriver { -public: + public: TestDriver(); ~TestDriver(); void set_leds(uint8_t leds) { m_leds = leds; } - MOCK_METHOD1(send_keyboard_mock, void (report_keyboard_t&)); - MOCK_METHOD1(send_mouse_mock, void (report_mouse_t&)); - MOCK_METHOD1(send_system_mock, void (uint16_t)); - MOCK_METHOD1(send_consumer_mock, void (uint16_t)); -private: - static uint8_t keyboard_leds(void); - static void send_keyboard(report_keyboard_t *report); - static void send_mouse(report_mouse_t* report); - static void send_system(uint16_t data); - static void send_consumer(uint16_t data); - host_driver_t m_driver; - uint8_t m_leds = 0; + MOCK_METHOD1(send_keyboard_mock, void(report_keyboard_t&)); + MOCK_METHOD1(send_mouse_mock, void(report_mouse_t&)); + MOCK_METHOD1(send_system_mock, void(uint16_t)); + MOCK_METHOD1(send_consumer_mock, void(uint16_t)); + + private: + static uint8_t keyboard_leds(void); + static void send_keyboard(report_keyboard_t* report); + static void send_mouse(report_mouse_t* report); + static void send_system(uint16_t data); + static void send_consumer(uint16_t data); + host_driver_t m_driver; + uint8_t m_leds = 0; static TestDriver* m_this; }; diff --git a/tests/test_common/test_fixture.cpp b/tests/test_common/test_fixture.cpp index e041df7128..0601b17191 100644 --- a/tests/test_common/test_fixture.cpp +++ b/tests/test_common/test_fixture.cpp @@ -1,26 +1,48 @@ #include "test_fixture.hpp" +#include <algorithm> +#include <cstdint> +#include <cstdio> +#include <cstdlib> +#include "gmock/gmock-cardinalities.h" #include "gmock/gmock.h" +#include "gtest/gtest.h" +#include "keyboard_report_util.hpp" +#include "keycode.h" #include "test_driver.hpp" +#include "test_logger.hpp" #include "test_matrix.h" -#include "keyboard.h" -#include "action.h" -#include "action_tapping.h" +#include "test_keymap_key.hpp" extern "C" { +#include "action.h" +#include "action_tapping.h" +#include "action_util.h" +#include "action_layer.h" #include "debug.h" #include "eeconfig.h" -#include "action_layer.h" +#include "keyboard.h" +#include "keymap.h" void set_time(uint32_t t); void advance_time(uint32_t ms); } using testing::_; -using testing::AnyNumber; -using testing::Between; -using testing::Return; + +/* This is used for dynamic dispatching keymap_key_to_keycode calls to the current active test_fixture. */ +TestFixture* TestFixture::m_this = nullptr; + +/* Override weak QMK function to allow the usage of isolated per-test keymaps in unit-tests. + * The actual call is dynamicaly dispatched to the current active test fixture, which in turn has it's own keymap. */ +extern "C" uint16_t keymap_key_to_keycode(uint8_t layer, keypos_t position) { + uint16_t keycode; + TestFixture::m_this->get_keycode(layer, position, &keycode); + return keycode; +} void TestFixture::SetUpTestCase() { + test_logger.info() << "TestFixture setup-up start." << std::endl; + // The following is enough to bootstrap the values set in main eeconfig_init_quantum(); eeconfig_update_debug(debug_config.raw); @@ -28,23 +50,99 @@ void TestFixture::SetUpTestCase() { TestDriver driver; EXPECT_CALL(driver, send_keyboard_mock(_)); keyboard_init(); + + test_logger.info() << "TestFixture setup-up end." << std::endl; } void TestFixture::TearDownTestCase() {} -TestFixture::TestFixture() {} +TestFixture::TestFixture() { m_this = this; } TestFixture::~TestFixture() { + test_logger.info() << "TestFixture clean-up start." << std::endl; TestDriver driver; - // Run for a while to make sure all keys are completely released - EXPECT_CALL(driver, send_keyboard_mock(_)).Times(AnyNumber()); - layer_clear(); + + EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(2); + + /* Reset keyboard state. */ clear_all_keys(); - idle_for(TAPPING_TERM + 10); + + clear_keyboard(); + + clear_oneshot_mods(); + clear_oneshot_locked_mods(); + reset_oneshot_layer(); + + layer_clear(); + +#if defined(SWAP_HANDS_ENABLE) + clear_oneshot_swaphands(); +#endif + + idle_for(TAPPING_TERM * 10); + testing::Mock::VerifyAndClearExpectations(&driver); + + /* Verify that the matrix really is cleared */ + EXPECT_CALL(driver, send_keyboard_mock(_)).Times(0); + idle_for(TAPPING_TERM * 10); testing::Mock::VerifyAndClearExpectations(&driver); - // Verify that the matrix really is cleared - EXPECT_CALL(driver, send_keyboard_mock(KeyboardReport())).Times(0); - idle_for(TAPPING_TERM + 10); + + m_this = nullptr; + + test_logger.info() << "TestFixture clean-up end." << std::endl; + + print_test_log(); +} + +void TestFixture::add_key(KeymapKey key) { + if (this->find_key(key.layer, key.position)) { + FAIL() << "Key is already mapped for layer " << +key.layer << " and (column,row) (" << +key.position.col << "," << +key.position.row << ")"; + } + + this->keymap.push_back(key); +} + +void TestFixture::set_keymap(std::initializer_list<KeymapKey> keys) { + this->keymap.clear(); + for (auto& key : keys) { + add_key(key); + } +} + +const KeymapKey* TestFixture::find_key(layer_t layer, keypos_t position) const { + auto keymap_key_predicate = [&](KeymapKey candidate) { return candidate.layer == layer && candidate.position.col == position.col && candidate.position.row == position.row; }; + + auto result = std::find_if(this->keymap.begin(), this->keymap.end(), keymap_key_predicate); + + if (result != std::end(this->keymap)) { + return &(*result); + } + return nullptr; +} + +void TestFixture::get_keycode(const layer_t layer, const keypos_t position, uint16_t* result) const { + bool key_is_out_of_bounds = position.col >= MATRIX_COLS && position.row >= MATRIX_ROWS; + + if (key_is_out_of_bounds) { + /* See if this is done in hardware as well, because this is 100% out of bounds reads on all QMK keebs out there. */ + auto msg = [&]() { + std::stringstream msg; + msg << "Keycode for position (" << +position.col << "," << +position.row << ") requested! This is out of bounds." << std::endl; + return msg.str(); + }(); + + *result = KC_NO; + test_logger.error() << msg; + EXPECT_FALSE(key_is_out_of_bounds) << msg; + return; + } + + if (auto key = this->find_key(layer, position)) { + *result = key->code; + return; + } + + FAIL() << "No key is mapped for layer " << +layer << " and (column,row) " << +position.col << "," << +position.row << ")"; } void TestFixture::run_one_scan_loop() { @@ -57,3 +155,17 @@ void TestFixture::idle_for(unsigned time) { run_one_scan_loop(); } } + +void TestFixture::print_test_log() const { + const ::testing::TestInfo* const test_info = ::testing::UnitTest::GetInstance()->current_test_info(); + if (HasFailure()) { + std::cerr << test_info->test_case_name() << "." << test_info->name() << " failed!" << std::endl; + test_logger.print_log(); + } + test_logger.reset(); +} + +void TestFixture::expect_layer_state(layer_t layer_state) const { + test_logger.trace() << "Layer state: (" << +layer_state << ") Highest layer bit: (" << +get_highest_layer(layer_state) << ")" << std::endl; + EXPECT_TRUE(layer_state_is(layer_state)); +} diff --git a/tests/test_common/test_fixture.hpp b/tests/test_common/test_fixture.hpp index 340503665b..73b5d8d3e8 100644 --- a/tests/test_common/test_fixture.hpp +++ b/tests/test_common/test_fixture.hpp @@ -16,15 +16,34 @@ #pragma once +#include <cstdint> +#include <unordered_map> +#include <optional> #include "gtest/gtest.h" +#include "keyboard.h" +#include "test_keymap_key.hpp" class TestFixture : public testing::Test { -public: + public: + static TestFixture* m_this; + TestFixture(); ~TestFixture(); static void SetUpTestCase(); static void TearDownTestCase(); + void set_keymap(std::initializer_list<KeymapKey> keycodes); + void add_key(const KeymapKey key); + + const KeymapKey* find_key(const layer_t layer_t, const keypos_t position) const; + void get_keycode(const layer_t layer, const keypos_t position, uint16_t* result) const; + void run_one_scan_loop(); void idle_for(unsigned ms); + + void expect_layer_state(layer_t layer) const; + + protected: + void print_test_log() const; + std::vector<KeymapKey> keymap; }; diff --git a/tests/test_common/test_keymap_key.cpp b/tests/test_common/test_keymap_key.cpp new file mode 100644 index 0000000000..878ae097bf --- /dev/null +++ b/tests/test_common/test_keymap_key.cpp @@ -0,0 +1,30 @@ +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "test_keymap_key.hpp" +#include "test_logger.hpp" +#include "gtest/gtest-message.h" +#include "gtest/gtest.h" + +void KeymapKey::press() { + test_logger.trace() << "Key pressed: (" << +this->position.col << "," << +this->position.row << ")" << std::endl; + press_key(this->position.col, this->position.row); +} + +void KeymapKey::release() { + test_logger.trace() << "Key released: (" << +this->position.col << "," << +this->position.row << ")" << std::endl; + release_key(this->position.col, this->position.row); +} \ No newline at end of file diff --git a/tests/test_common/test_keymap_key.hpp b/tests/test_common/test_keymap_key.hpp new file mode 100644 index 0000000000..7861cb4a32 --- /dev/null +++ b/tests/test_common/test_keymap_key.hpp @@ -0,0 +1,46 @@ +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +extern "C" { +#include "keyboard.h" +#include "test_matrix.h" +} + +#include <cassert> + +typedef uint8_t layer_t; + +struct KeymapKey { + KeymapKey(layer_t layer, uint8_t col, uint8_t row, uint16_t keycode) : layer(layer), position({.col = col, .row = row}), code(keycode), report_code(keycode) { validate(); } + KeymapKey(layer_t layer, uint8_t col, uint8_t row, uint16_t keycode, uint16_t report_code) : layer(layer), position({.col = col, .row = row}), code(keycode), report_code(report_code) { validate(); } + + void press(); + void release(); + + const layer_t layer; + const keypos_t position; + const uint16_t code; + /* Sometimes the keycode does not match the code that is send in the usb report, so we provide it here. */ + const uint16_t report_code; + + private: + void validate() { + assert(position.col <= MATRIX_COLS); + assert(position.row <= MATRIX_ROWS); + } +}; \ No newline at end of file diff --git a/tests/test_common/test_logger.cpp b/tests/test_common/test_logger.cpp new file mode 100644 index 0000000000..959fdde5ec --- /dev/null +++ b/tests/test_common/test_logger.cpp @@ -0,0 +1,39 @@ +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <iostream> +#include "test_logger.hpp" + +TestLogger test_logger; + +TestLogger& TestLogger::info() { + *this << "[ INFO ] "; + return *this; +} + +TestLogger& TestLogger::trace() { + *this << "[ TRACE ] "; + return *this; +} + +TestLogger& TestLogger::error() { + *this << "[ ERROR ] "; + return *this; +} + +void TestLogger::reset() { this->m_log.str(""); }; + +void TestLogger::print_log() { std::cerr << this->m_log.str(); } diff --git a/tests/test_common/test_logger.hpp b/tests/test_common/test_logger.hpp new file mode 100644 index 0000000000..348af7fab8 --- /dev/null +++ b/tests/test_common/test_logger.hpp @@ -0,0 +1,35 @@ +/* Copyright 2021 Stefan Kerkmann + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include <ostream> +#include <sstream> + +class TestLogger : public std::ostream { + public: + TestLogger() : std::ostream(&m_log){}; + TestLogger& info(); + TestLogger& trace(); + TestLogger& error(); + void print_log(); + void reset(); + + private: + std::stringbuf m_log; +}; + +extern TestLogger test_logger; \ No newline at end of file From 8b05d30cd1ffb6890c201095715df9dfb671e9bf Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Tue, 23 Nov 2021 19:02:38 +0000 Subject: [PATCH 572/595] Pluckey: Fix QMK Configurator Implementation (#15254) * rename LAYOUT to LAYOUT_all * pluckey.h: add matrix diagram * pluckey.h: use XXX for KC_NO * add LAYOUT_ergo macro with keymap `info.json` had layout data for this macro, but the macro was not present in the source code. * info.json: correct key sequence Fixes incorrect key assignments in QMK Configurator. --- keyboards/pluckey/info.json | 281 +++++++++--------- keyboards/pluckey/keymaps/default/keymap.c | 8 +- .../pluckey/keymaps/default_ergo/keymap.c | 77 +++++ keyboards/pluckey/pluckey.h | 57 +++- 4 files changed, 273 insertions(+), 150 deletions(-) create mode 100644 keyboards/pluckey/keymaps/default_ergo/keymap.c diff --git a/keyboards/pluckey/info.json b/keyboards/pluckey/info.json index 0a6bd1832d..de58bee802 100644 --- a/keyboards/pluckey/info.json +++ b/keyboards/pluckey/info.json @@ -2,147 +2,158 @@ "keyboard_name": "pluckey", "url": "https://github.com/floookay/pluckey", "maintainer": "floookay", + "layout_aliases": { + "LAYOUT": "LAYOUT_all" + }, "layouts": { - "LAYOUT": { + "LAYOUT_all": { "layout": [ - {"x":3.5, "y":0}, - {"x":15, "y":0}, - {"x":2.5, "y":0.125}, - {"x":4.5, "y":0.125}, - {"x":14, "y":0.125}, - {"x":16, "y":0.125}, - {"x":5.5, "y":0.25}, - {"x":6.5, "y":0.25}, - {"x":12, "y":0.25}, - {"x":13, "y":0.25}, - {"x":0, "y":0.625, "w":1.5}, - {"x":1.5, "y":0.625}, - {"x":17, "y":0.625}, - {"x":18, "y":0.625, "w":1.5}, - {"x":3.5, "y":1.0}, - {"x":15, "y":1.0}, - {"x":2.5, "y":1.125}, - {"x":4.5, "y":1.125}, - {"x":14, "y":1.125}, - {"x":16, "y":1.125}, - {"x":5.5, "y":1.25}, - {"x":6.5, "y":1.25}, - {"x":12, "y":1.25}, - {"x":13, "y":1.25}, - {"x":0, "y":1.625, "w":1.5}, - {"x":1.5, "y":1.625}, - {"x":17, "y":1.625}, - {"x":18, "y":1.625, "w":1.5}, - {"x":3.5, "y":2}, - {"x":15, "y":2}, - {"x":2.5, "y":2.125}, - {"x":4.5, "y":2.125}, - {"x":14, "y":2.125}, - {"x":16, "y":2.125}, - {"x":5.5, "y":2.25}, - {"x":6.5, "y":2.25}, - {"x":12, "y":2.25}, - {"x":13, "y":2.25}, - {"x":0, "y":2.625, "w":1.5}, - {"x":1.5, "y":2.625}, - {"x":17, "y":2.625}, - {"x":18, "y":2.625, "w":1.5}, - {"x":6.5, "y":3.25}, - {"x":12, "y":3.25}, - {"x":3.5, "y":3}, - {"x":15, "y":3}, - {"x":2.5, "y":3.125}, - {"x":4.5, "y":3.125}, - {"x":14, "y":3.125}, - {"x":16, "y":3.125}, - {"x":5.5, "y":3.25}, - {"x":13, "y":3.25}, - {"x":0, "y":3.625, "w":1.5}, - {"x":1.5, "y":3.625}, - {"x":17, "y":3.625}, - {"x":18, "y":3.625, "w":1.5}, - {"x":7.5, "y":3.75}, - {"x":11, "y":3.75}, - {"x":3.5, "y":4}, - {"x":15, "y":4}, - {"x":2.5, "y":4.125}, - {"x":4.5, "y":4.125}, - {"x":14, "y":4.125}, - {"x":16, "y":4.125}, - {"x":5.75, "y":4.5, "w":1.5}, - {"x":12.25, "y":4.5, "w":1.5}, - {"x":7.25, "y":4.75}, - {"x":11.25, "y":4.75} + {"label":"Esc", "x":0, "y":0.625, "w":1.5}, + {"label":"1!", "x":1.5, "y":0.625}, + {"label":"2@", "x":2.5, "y":0.125}, + {"label":"3#", "x":3.5, "y":0}, + {"label":"4$", "x":4.5, "y":0.125}, + {"label":"5%", "x":5.5, "y":0.25}, + {"label":"-_", "x":6.5, "y":0.25}, + {"label":"=+", "x":12, "y":0.25}, + {"label":"6^", "x":13, "y":0.25}, + {"label":"7&", "x":14, "y":0.125}, + {"label":"8*", "x":15, "y":0}, + {"label":"9(", "x":16, "y":0.125}, + {"label":"0)", "x":17, "y":0.625}, + {"label":"`~", "x":18, "y":0.625, "w":1.5}, + + {"label":"Tab", "x":0, "y":1.625, "w":1.5}, + {"label":"Q", "x":1.5, "y":1.625}, + {"label":"W", "x":2.5, "y":1.125}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1.125}, + {"label":"T", "x":5.5, "y":1.25}, + {"label":"[{", "x":6.5, "y":1.25}, + {"label":"]}", "x":12, "y":1.25}, + {"label":"Y", "x":13, "y":1.25}, + {"label":"U", "x":14, "y":1.125}, + {"label":"I", "x":16, "y":1.125}, + {"label":"O", "x":15, "y":1}, + {"label":"P", "x":17, "y":1.625}, + {"label":"\\|", "x":18, "y":1.625, "w":1.5}, + + {"label":"Ctrl", "x":0, "y":2.625, "w":1.5}, + {"label":"A", "x":1.5, "y":2.625}, + {"label":"S", "x":2.5, "y":2.125}, + {"label":"D", "x":3.5, "y":2}, + {"label":"F", "x":4.5, "y":2.125}, + {"label":"G", "x":5.5, "y":2.25}, + {"label":"(", "x":6.5, "y":2.25}, + {"label":")", "x":12, "y":2.25}, + {"label":"H", "x":13, "y":2.25}, + {"label":"J", "x":14, "y":2.125}, + {"label":"K", "x":16, "y":2.125}, + {"label":"L", "x":15, "y":2}, + {"label":";:", "x":17, "y":2.625}, + {"label":"'\"", "x":18, "y":2.625, "w":1.5}, + + {"label":"Shift", "x":0, "y":3.625, "w":1.5}, + {"label":"Z", "x":1.5, "y":3.625}, + {"label":"X", "x":2.5, "y":3.125}, + {"label":"C", "x":3.5, "y":3}, + {"label":"V", "x":4.5, "y":3.125}, + {"label":"B", "x":5.5, "y":3.25}, + {"label":"{", "x":6.5, "y":3.25}, + {"label":"Home", "x":7.5, "y":3.75}, + {"label":"End", "x":11, "y":3.75}, + {"label":"}", "x":12, "y":3.25}, + {"label":"N", "x":13, "y":3.25}, + {"label":"M", "x":14, "y":3.125}, + {"label":",<", "x":15, "y":3}, + {"label":".>", "x":16, "y":3.125}, + {"label":"/?", "x":17, "y":3.625}, + {"label":"Shift", "x":18, "y":3.625, "w":1.5}, + + {"label":"GUI", "x":2.5, "y":4.125}, + {"label":"Alt", "x":3.5, "y":4}, + {"label":"Lower", "x":4.5, "y":4.125}, + {"label":"Space", "x":5.75, "y":4.5, "w":1.5}, + {"label":"Backspace", "x":7.25, "y":4.75}, + {"label":"Enter", "x":11.25, "y":4.75}, + {"label":"Space", "x":12.25, "y":4.5, "w":1.5}, + {"label":"Raise", "x":14, "y":4.125}, + {"label":"Alt", "x":15, "y":4}, + {"label":"MEH", "x":16, "y":4.125} ] }, "LAYOUT_ergo": { "layout": [ - {"x":3.5, "y":0}, - {"x":15, "y":0}, - {"x":2.5, "y":0.125}, - {"x":4.5, "y":0.125}, - {"x":14, "y":0.125}, - {"x":16, "y":0.125}, - {"x":5.5, "y":0.25}, - {"x":6.5, "y":0.25}, - {"x":12, "y":0.25}, - {"x":13, "y":0.25}, - {"x":0, "y":0.625, "w":1.5}, - {"x":1.5, "y":0.625}, - {"x":17, "y":0.625}, - {"x":18, "y":0.625, "w":1.5}, - {"x":3.5, "y":1.0}, - {"x":15, "y":1.0}, - {"x":2.5, "y":1.125}, - {"x":4.5, "y":1.125}, - {"x":14, "y":1.125}, - {"x":16, "y":1.125}, - {"x":5.5, "y":1.25}, - {"x":6.5, "y":1.25, "h":1.5}, - {"x":12, "y":1.25, "h":1.5}, - {"x":13, "y":1.25}, - {"x":0, "y":1.625, "w":1.5}, - {"x":1.5, "y":1.625}, - {"x":17, "y":1.625}, - {"x":18, "y":1.625, "w":1.5}, - {"x":3.5, "y":2}, - {"x":15, "y":2}, - {"x":2.5, "y":2.125}, - {"x":4.5, "y":2.125}, - {"x":14, "y":2.125}, - {"x":16, "y":2.125}, - {"x":5.5, "y":2.25}, - {"x":13, "y":2.25}, - {"x":0, "y":2.625, "w":1.5}, - {"x":1.5, "y":2.625}, - {"x":17, "y":2.625}, - {"x":18, "y":2.625, "w":1.5}, - {"x":6.5, "y":2.75, "h":1.5}, - {"x":12, "y":2.75, "h":1.5}, - {"x":3.5, "y":3}, - {"x":15, "y":3}, - {"x":2.5, "y":3.125}, - {"x":4.5, "y":3.125}, - {"x":14, "y":3.125}, - {"x":16, "y":3.125}, - {"x":5.5, "y":3.25}, - {"x":13, "y":3.25}, - {"x":0, "y":3.625, "w":1.5}, - {"x":1.5, "y":3.625}, - {"x":17, "y":3.625}, - {"x":18, "y":3.625, "w":1.5}, - {"x":7.5, "y":3.75}, - {"x":11, "y":3.75}, - {"x":3.5, "y":4}, - {"x":15, "y":4}, - {"x":2.5, "y":4.125}, - {"x":4.5, "y":4.125}, - {"x":14, "y":4.125}, - {"x":16, "y":4.125}, - {"x":5.75, "y":4.5, "w":1.5}, - {"x":12.25, "y":4.5, "w":1.5}, - {"x":7.25, "y":4.75}, - {"x":11.25, "y":4.75} + {"label":"Esc", "x":0, "y":0.625, "w":1.5}, + {"label":"1!", "x":1.5, "y":0.625}, + {"label":"2@", "x":2.5, "y":0.125}, + {"label":"3#", "x":3.5, "y":0}, + {"label":"4$", "x":4.5, "y":0.125}, + {"label":"5%", "x":5.5, "y":0.25}, + {"label":"-_", "x":6.5, "y":0.25}, + {"label":"=+", "x":12, "y":0.25}, + {"label":"6^", "x":13, "y":0.25}, + {"label":"7&", "x":14, "y":0.125}, + {"label":"8*", "x":15, "y":0}, + {"label":"9(", "x":16, "y":0.125}, + {"label":"0)", "x":17, "y":0.625}, + {"label":"`~", "x":18, "y":0.625, "w":1.5}, + + {"label":"Tab", "x":0, "y":1.625, "w":1.5}, + {"label":"Q", "x":1.5, "y":1.625}, + {"label":"W", "x":2.5, "y":1.125}, + {"label":"E", "x":3.5, "y":1}, + {"label":"R", "x":4.5, "y":1.125}, + {"label":"T", "x":5.5, "y":1.25}, + {"label":"[{", "x":6.5, "y":1.25, "h":1.5}, + {"label":"]}", "x":12, "y":1.25, "h":1.5}, + {"label":"Y", "x":13, "y":1.25}, + {"label":"U", "x":14, "y":1.125}, + {"label":"I", "x":16, "y":1.125}, + {"label":"O", "x":15, "y":1}, + {"label":"P", "x":17, "y":1.625}, + {"label":"\\|", "x":18, "y":1.625, "w":1.5}, + + {"label":"Ctrl", "x":0, "y":2.625, "w":1.5}, + {"label":"A", "x":1.5, "y":2.625}, + {"label":"S", "x":2.5, "y":2.125}, + {"label":"D", "x":3.5, "y":2}, + {"label":"F", "x":4.5, "y":2.125}, + {"label":"G", "x":5.5, "y":2.25}, + {"label":"H", "x":13, "y":2.25}, + {"label":"J", "x":14, "y":2.125}, + {"label":"K", "x":16, "y":2.125}, + {"label":"L", "x":15, "y":2}, + {"label":";:", "x":17, "y":2.625}, + {"label":"'\"", "x":18, "y":2.625, "w":1.5}, + + {"label":"Shift", "x":0, "y":3.625, "w":1.5}, + {"label":"Z", "x":1.5, "y":3.625}, + {"label":"X", "x":2.5, "y":3.125}, + {"label":"C", "x":3.5, "y":3}, + {"label":"V", "x":4.5, "y":3.125}, + {"label":"B", "x":5.5, "y":3.25}, + {"label":"(", "x":6.5, "y":2.75, "h":1.5}, + {"label":"Home", "x":7.5, "y":3.75}, + {"label":"End", "x":11, "y":3.75}, + {"label":")", "x":12, "y":2.75, "h":1.5}, + {"label":"N", "x":13, "y":3.25}, + {"label":"M", "x":14, "y":3.125}, + {"label":",<", "x":15, "y":3}, + {"label":".>", "x":16, "y":3.125}, + {"label":"/?", "x":17, "y":3.625}, + {"label":"Shift", "x":18, "y":3.625, "w":1.5}, + + {"label":"GUI", "x":2.5, "y":4.125}, + {"label":"Alt", "x":3.5, "y":4}, + {"label":"Lower", "x":4.5, "y":4.125}, + {"label":"Space", "x":5.75, "y":4.5, "w":1.5}, + {"label":"Backspace", "x":7.25, "y":4.75}, + {"label":"Enter", "x":11.25, "y":4.75}, + {"label":"Space", "x":12.25, "y":4.5, "w":1.5}, + {"label":"Raise", "x":14, "y":4.125}, + {"label":"Alt", "x":15, "y":4}, + {"label":"MEH", "x":16, "y":4.125} ] } } diff --git a/keyboards/pluckey/keymaps/default/keymap.c b/keyboards/pluckey/keymaps/default/keymap.c index 31042fc692..787bb192b2 100644 --- a/keyboards/pluckey/keymaps/default/keymap.c +++ b/keyboards/pluckey/keymaps/default/keymap.c @@ -35,28 +35,28 @@ enum custom_keycodes { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Base */ - [_BASE] = LAYOUT( + [_BASE] = LAYOUT_all( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_MINS, KC_EQL, KC_6, KC_7, KC_8, KC_9, KC_0, KC_GRV, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_LBRC, KC_RBRC, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_LPRN, KC_RPRN, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LCBR, KC_HOME, KC_END, KC_RCBR, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_LGUI, KC_LALT, MO_LOW, KC_SPC, KC_BSPC, KC_ENT, KC_SPC, MO_RAIS, KC_RALT, KC_MEH ), - [_LOWER] = LAYOUT( + [_LOWER] = LAYOUT_all( _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F11, KC_F12, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_PSCR, _______, _______, _______, _______, KC_PIPE, KC_UNDS, KC_LPRN, KC_RPRN, KC_PLUS, KC_PIPE, _______, _______, _______, _______, _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_LPRN, KC_RPRN, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, _______, _______, _______, _______, _______, _______, M_ARROW, KC_PGUP, KC_PGDN, _______, _______, _______, _______, _______, _______, _______, _______, _______, MO_CURR, _______, KC_DEL, _______, _______, MO_ADJU, _______, _______ ), - [_RAISE] = LAYOUT( + [_RAISE] = LAYOUT_all( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGUP, _______, _______, _______, _______, _______, _______, KC_VOLU, _______, _______, KC_LPRN, KC_RPRN, _______, KC_BTN4, KC_UP, KC_BTN5, _______, _______, _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, KC_LPRN, KC_RPRN, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_END, _______, _______, _______, _______, KC_VOLD, _______, _______, M_ARROW, KC_PGUP, KC_PGDN, _______, _______, _______, KC_PGDN, _______, _______, _______, _______, _______, MO_ADJU, _______, KC_DEL, _______, _______, MO_CURR, _______, _______ ), - [_ADJUST] = LAYOUT( + [_ADJUST] = LAYOUT_all( KC_SLEP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_WH_U, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_WH_L, KC_WH_D, KC_WH_R, _______, _______, diff --git a/keyboards/pluckey/keymaps/default_ergo/keymap.c b/keyboards/pluckey/keymaps/default_ergo/keymap.c new file mode 100644 index 0000000000..313b118b8a --- /dev/null +++ b/keyboards/pluckey/keymaps/default_ergo/keymap.c @@ -0,0 +1,77 @@ +/* Copyright 2021 floookay + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _LOWER, + _RAISE, + _ADJUST +}; + +// Defines the keycodes used by our macros in process_record_user +enum custom_keycodes { + M_ARROW +}; + +#define MO_LOW MO(_LOWER) +#define MO_RAIS MO(_RAISE) +#define MO_ADJU MO(_ADJUST) +#define MO_CURR _______ + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [_BASE] = LAYOUT_ergo( + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_MINS, KC_EQL, KC_6, KC_7, KC_8, KC_9, KC_0, KC_GRV, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_LBRC, KC_RBRC, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSLS, + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LPRN, KC_HOME, KC_END, KC_RPRN, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, + KC_LGUI, KC_LALT, MO_LOW, KC_SPC, KC_BSPC, KC_ENT, KC_SPC, MO_RAIS, KC_RALT, KC_MEH + ), + [_LOWER] = LAYOUT_ergo( + _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F11, KC_F12, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_PSCR, + _______, _______, _______, _______, KC_PIPE, KC_UNDS, KC_LPRN, KC_RPRN, KC_PLUS, KC_PIPE, _______, _______, _______, _______, + _______, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, _______, + _______, _______, _______, _______, _______, _______, M_ARROW, KC_PGUP, KC_PGDN, _______, _______, _______, _______, _______, _______, _______, + _______, _______, MO_CURR, _______, KC_DEL, _______, _______, MO_ADJU, _______, _______ + ), + [_RAISE] = LAYOUT_ergo( + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGUP, _______, _______, _______, + _______, _______, _______, KC_VOLU, _______, _______, KC_LPRN, KC_RPRN, _______, KC_BTN4, KC_UP, KC_BTN5, _______, _______, + _______, _______, KC_MPRV, KC_MPLY, KC_MNXT, _______, KC_HOME, KC_LEFT, KC_DOWN, KC_RGHT, KC_END, _______, + _______, _______, _______, KC_VOLD, _______, _______, M_ARROW, KC_PGUP, KC_PGDN, _______, _______, _______, KC_PGDN, _______, _______, _______, + _______, _______, MO_ADJU, _______, KC_DEL, _______, _______, MO_CURR, _______, _______ + ), + [_ADJUST] = LAYOUT_ergo( + KC_SLEP, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_WH_U, _______, _______, _______, + _______, _______, _______, _______, _______, _______, _______, KC_WH_L, KC_WH_D, KC_WH_R, _______, _______, + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, + _______, _______, _______, _______, KC_CLR, _______, _______, _______, _______, _______ + ) +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case M_ARROW: + if (record->event.pressed) { + SEND_STRING("->"); + } + break; + } + return true; +} diff --git a/keyboards/pluckey/pluckey.h b/keyboards/pluckey/pluckey.h index 628a89baa9..d7d6dc4d3a 100644 --- a/keyboards/pluckey/pluckey.h +++ b/keyboards/pluckey/pluckey.h @@ -18,6 +18,22 @@ #include "quantum.h" +#define XXX KC_NO + +/* + * ┌───┬───┬───┬───┬───┐ ┌───┬───┬───┬───┬───┐ + * ┌─────┬───┤L02│L03│L04│L05│L06│ │R00│R01│R02│R03│R04├───┬─────┐ + * │L00 │L01├───┼───┼───┼───┼───┤ ┌───┐ ┌───┐ ├───┼───┼───┼───┼───┤R05│R06 │ + * ├─────┼───┤L12│L13│L14│L15│L16│ │L16│ │R10│ │R10│R11│R12│R13│R14├───┼─────┤ + * │L10 │L11├───┼───┼───┼───┼───┤ │ │ │ │ ├───┼───┼───┼───┼───┤R15│R16 │ + * ├─────┼───┤L22│L23│L24│L25│L26│ ├───┤ ├───┤ │R20│R21│R22│R23│R24├───┼─────┤ + * │L20 │L21├───┼───┼───┼───┼───┼───┐ │L36├───┐ ┌───┤R30│ ┌───┼───┼───┼───┼───┼───┤R25│R26 │ + * ├─────┼───┤L32│L33│L34│L35│L36│L41│ │ │ │ │ │ │ │R45│R30│R31│R32│R33│R34├───┼─────┤ + * │L30 │L31├───┼───┼───┼┬──┴──┬┴──┬┘ └──┬┘ ┌┘ └┐ └┬──┘ └┬──┴┬──┴──┬┼───┼───┼───┤R35│R36 │ + * └─────┴───┤L42│L43│L44││L45 │L46│ │L46│ │R40│ │R40│R41 ││R42│R43│R44├───┴─────┘ + * └───┴───┴───┘└─────┴───┘ └───┘ └───┘ └───┴─────┘└───┴───┴───┘ + */ + /* This is a shortcut to help you visually see your layout. * * The first section contains all of the arguments representing the physical @@ -26,21 +42,40 @@ * The second converts the arguments into a two-dimensional array which * represents the switch matrix. */ -#define LAYOUT( \ +#define LAYOUT_all( \ l00, l01, l02, l03, l04, l05, l06, r00, r01, r02, r03, r04, r05, r06, \ l10, l11, l12, l13, l14, l15, l16, r10, r11, r12, r13, r14, r15, r16, \ l20, l21, l22, l23, l24, l25, l26, r20, r21, r22, r23, r24, r25, r26, \ l30, l31, l32, l33, l34, l35, l36, l41, r45, r30, r31, r32, r33, r34, r35, r36, \ l42, l43, l44, l45, l46, r40, r41, r42, r43, r44 \ ){ \ - { l00, l01, l02, l03, l04, l05, l06 }, \ - { l10, l11, l12, l13, l14, l15, l16 }, \ - { l20, l21, l22, l23, l24, l25, l26 }, \ - { l30, l31, l32, l33, l34, l35, l36 }, \ - { KC_NO, l41, l42, l43, l44, l45, l46 }, \ - { r06, r05, r04, r03, r02, r01, r00 }, \ - { r16, r15, r14, r13, r12, r11, r10 }, \ - { r26, r25, r24, r23, r22, r21, r20 }, \ - { r36, r35, r34, r33, r32, r31, r30 }, \ - { KC_NO, r45, r44, r43, r42, r41, r40 } \ + { l00, l01, l02, l03, l04, l05, l06 }, \ + { l10, l11, l12, l13, l14, l15, l16 }, \ + { l20, l21, l22, l23, l24, l25, l26 }, \ + { l30, l31, l32, l33, l34, l35, l36 }, \ + { XXX, l41, l42, l43, l44, l45, l46 }, \ + { r06, r05, r04, r03, r02, r01, r00 }, \ + { r16, r15, r14, r13, r12, r11, r10 }, \ + { r26, r25, r24, r23, r22, r21, r20 }, \ + { r36, r35, r34, r33, r32, r31, r30 }, \ + { XXX, r45, r44, r43, r42, r41, r40 } \ +} + +#define LAYOUT_ergo( \ + l00, l01, l02, l03, l04, l05, l06, r00, r01, r02, r03, r04, r05, r06, \ + l10, l11, l12, l13, l14, l15, l16, r10, r11, r12, r13, r14, r15, r16, \ + l20, l21, l22, l23, l24, l25, r21, r22, r23, r24, r25, r26, \ + l30, l31, l32, l33, l34, l35, l36, l41, r45, r30, r31, r32, r33, r34, r35, r36, \ + l42, l43, l44, l45, l46, r40, r41, r42, r43, r44 \ +){ \ + { l00, l01, l02, l03, l04, l05, l06 }, \ + { l10, l11, l12, l13, l14, l15, l16 }, \ + { l20, l21, l22, l23, l24, l25, XXX }, \ + { l30, l31, l32, l33, l34, l35, l36 }, \ + { XXX, l41, l42, l43, l44, l45, l46 }, \ + { r06, r05, r04, r03, r02, r01, r00 }, \ + { r16, r15, r14, r13, r12, r11, r10 }, \ + { r26, r25, r24, r23, r22, r21, XXX }, \ + { r36, r35, r34, r33, r32, r31, r30 }, \ + { XXX, r45, r44, r43, r42, r41, r40 } \ } From afa2da01b4f9a297f318483f6f404396ac4516a7 Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Tue, 23 Nov 2021 19:25:55 +0000 Subject: [PATCH 573/595] Portal 66 Layout Macro Refactor (#15255) * soldered.h: use QMK 3-character notation * soldered.h: add matrix diagram * portal_66/soldered: rename LAYOUT_65_ansi_split_bs to LAYOUT_65_ansi_blocker_split_bs * portal_66/soldered: rename LAYOUT_65_ansi to LAYOUT_65_ansi_blocker * portal_66/soldered: rename LAYOUT_65_tsangan_split_bs to LAYOUT_65_ansi_blocker_tsangan_split_bs * portal_66/soldered: rename LAYOUT_65_iso to LAYOUT_65_iso_blocker * portal_66/soldered: add LAYOUT_65_iso_blocker_split_bs * portal_66/soldered: add LAYOUT_65_iso_blocker_tsangan_split_bs * portal_66/soldered: enable Community Layout support * hotswap.h: use QMK 3-character notation * hotswap.h: add matrix diagram * portal_66/hotswap: rename LAYOUT to LAYOUT_65_ansi_blocker * portal_66/hotswap: enable Community Layout support --- keyboards/portal_66/hotswap/hotswap.h | 38 ++-- keyboards/portal_66/hotswap/info.json | 5 +- .../hotswap/keymaps/default/keymap.c | 4 +- .../portal_66/hotswap/keymaps/via/keymap.c | 8 +- keyboards/portal_66/hotswap/rules.mk | 2 + keyboards/portal_66/soldered/info.json | 167 +++++++++++++++++- .../soldered/keymaps/default/keymap.c | 4 +- .../portal_66/soldered/keymaps/via/keymap.c | 8 +- keyboards/portal_66/soldered/rules.mk | 2 + keyboards/portal_66/soldered/soldered.h | 135 +++++++++----- 10 files changed, 301 insertions(+), 72 deletions(-) diff --git a/keyboards/portal_66/hotswap/hotswap.h b/keyboards/portal_66/hotswap/hotswap.h index 734184dd77..484594b9cb 100644 --- a/keyboards/portal_66/hotswap/hotswap.h +++ b/keyboards/portal_66/hotswap/hotswap.h @@ -18,16 +18,32 @@ #include "quantum.h" -#define LAYOUT( \ - k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k014, k015, \ - k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, k115, \ - k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k213, k215, \ - k300, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, k315, \ - k400, k401, k402, k406, k409, k411, k412, k413, k415 \ +#define XXX KC_NO + +/* + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───────┬───┐ + * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0A │0B │0C │0E │0F │ + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─────┼───┤ + * │10 │11 │12 │13 │14 │15 │16 │17 │18 │19 │1A │1B │1C │1D │1F │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤ + * │20 │21 │22 │23 │24 │25 │26 │27 │28 │29 │2A │2B │2D │2F │ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤ + * │30 │32 │33 │34 │35 │36 │37 │38 │39 │3A │3B │3C │3D │3F │ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤ + * │40 │41 │42 │46 │49 │4B │ │4C │4D │4F │ + * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘ + */ + +#define LAYOUT_65_ansi_blocker( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0E, k0F, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1F, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2D, k2F, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3F, \ + k40, k41, k42, k46, k49, k4B, k4C, k4D, k4F \ ) { \ - { k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, KC_NO, k014, k015 }, \ - { k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, KC_NO, k115 }, \ - { k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, KC_NO, k213, KC_NO, k215 }, \ - { k300, KC_NO, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, KC_NO, k315 }, \ - { k400, k401, k402, KC_NO, KC_NO, KC_NO, k406, KC_NO, KC_NO, k409, KC_NO, k411, k412, k413, KC_NO, k415 } \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, XXX, k0E, k0F }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, XXX, k1F }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, XXX, k2D, XXX, k2F }, \ + { k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, XXX, k3F }, \ + { k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, k49, XXX, k4B, k4C, k4D, XXX, k4F } \ } diff --git a/keyboards/portal_66/hotswap/info.json b/keyboards/portal_66/hotswap/info.json index e90bdd8813..984134a4e7 100644 --- a/keyboards/portal_66/hotswap/info.json +++ b/keyboards/portal_66/hotswap/info.json @@ -1,8 +1,11 @@ { "keyboard_name": "Portal 66 Hotswap", "maintainer": "matthewdias", + "layout_aliases": { + "LAYOUT": "LAYOUT_65_ansi_blocker" + }, "layouts": { - "LAYOUT": { + "LAYOUT_65_ansi_blocker": { "layout": [ { "x":0, "y":0 }, { "x":1, "y":0 }, diff --git a/keyboards/portal_66/hotswap/keymaps/default/keymap.c b/keyboards/portal_66/hotswap/keymaps/default/keymap.c index a476f5984d..5f9143a2ad 100644 --- a/keyboards/portal_66/hotswap/keymaps/default/keymap.c +++ b/keyboards/portal_66/hotswap/keymaps/default/keymap.c @@ -21,14 +21,14 @@ enum layer_names { }; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_BASE] = LAYOUT( + [_BASE] = LAYOUT_65_ansi_blocker( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_END, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(_FN), KC_LEFT, KC_DOWN, KC_RGHT ), - [_FN] = LAYOUT( + [_FN] = LAYOUT_65_ansi_blocker( RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, diff --git a/keyboards/portal_66/hotswap/keymaps/via/keymap.c b/keyboards/portal_66/hotswap/keymaps/via/keymap.c index a89f1eee66..7f9878eae3 100644 --- a/keyboards/portal_66/hotswap/keymaps/via/keymap.c +++ b/keyboards/portal_66/hotswap/keymaps/via/keymap.c @@ -23,28 +23,28 @@ enum layer_names { }; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_L0] = LAYOUT( + [_L0] = LAYOUT_65_ansi_blocker( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_END, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(_L1), KC_LEFT, KC_DOWN, KC_RGHT ), - [_L1] = LAYOUT( + [_L1] = LAYOUT_65_ansi_blocker( RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), - [_L2] = LAYOUT( + [_L2] = LAYOUT_65_ansi_blocker( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), - [_L3] = LAYOUT( + [_L3] = LAYOUT_65_ansi_blocker( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, diff --git a/keyboards/portal_66/hotswap/rules.mk b/keyboards/portal_66/hotswap/rules.mk index c79f74e34b..22a1e6726e 100644 --- a/keyboards/portal_66/hotswap/rules.mk +++ b/keyboards/portal_66/hotswap/rules.mk @@ -19,3 +19,5 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output + +LAYOUTS = 65_ansi_blocker diff --git a/keyboards/portal_66/soldered/info.json b/keyboards/portal_66/soldered/info.json index 730b5400ea..de621a2f70 100644 --- a/keyboards/portal_66/soldered/info.json +++ b/keyboards/portal_66/soldered/info.json @@ -1,8 +1,14 @@ { "keyboard_name": "Portal 66", "maintainer": "matthewdias", + "layout_aliases": { + "LAYOUT_65_ansi_split_bs": "LAYOUT_65_ansi_blocker_split_bs", + "LAYOUT_65_ansi": "LAYOUT_65_ansi_blocker", + "LAYOUT_65_tsangan_split_bs": "LAYOUT_65_ansi_blocker_tsangan_split_bs", + "LAYOUT_65_iso": "LAYOUT_65_iso_blocker" + }, "layouts": { - "LAYOUT_65_ansi_split_bs": { + "LAYOUT_65_ansi_blocker_split_bs": { "layout": [ { "x":0, "y":0 }, { "x":1, "y":0 }, @@ -78,7 +84,7 @@ { "x":15, "y":4 } ] }, - "LAYOUT_65_ansi": { + "LAYOUT_65_ansi_blocker": { "layout": [ { "x":0, "y":0 }, { "x":1, "y":0 }, @@ -153,7 +159,7 @@ { "x":15, "y":4 } ] }, - "LAYOUT_65_tsangan_split_bs": { + "LAYOUT_65_ansi_blocker_tsangan_split_bs": { "layout": [ { "x":0, "y":0 }, { "x":1, "y":0 }, @@ -228,7 +234,84 @@ { "x":15, "y":4 } ] }, - "LAYOUT_65_iso": { + "LAYOUT_65_iso_blocker_split_bs": { + "layout": [ + { "x":0, "y":0 }, + { "x":1, "y":0 }, + { "x":2, "y":0 }, + { "x":3, "y":0 }, + { "x":4, "y":0 }, + { "x":5, "y":0 }, + { "x":6, "y":0 }, + { "x":7, "y":0 }, + { "x":8, "y":0 }, + { "x":9, "y":0 }, + { "x":10, "y":0 }, + { "x":11, "y":0 }, + { "x":12, "y":0 }, + { "x":13, "y":0 }, + { "x":14, "y":0 }, + { "x":15, "y":0 }, + + { "x":0, "y":1, "w":1.5 }, + { "x":1.5, "y":1 }, + { "x":2.5, "y":1 }, + { "x":3.5, "y":1 }, + { "x":4.5, "y":1 }, + { "x":5.5, "y":1 }, + { "x":6.5, "y":1 }, + { "x":7.5, "y":1 }, + { "x":8.5, "y":1 }, + { "x":9.5, "y":1 }, + { "x":10.5, "y":1 }, + { "x":11.5, "y":1 }, + { "x":12.5, "y":1 }, + { "x":15, "y":1 }, + + { "x":0, "y":2, "w":1.75 }, + { "x":1.75, "y":2 }, + { "x":2.75, "y":2 }, + { "x":3.75, "y":2 }, + { "x":4.75, "y":2 }, + { "x":5.75, "y":2 }, + { "x":6.75, "y":2 }, + { "x":7.75, "y":2 }, + { "x":8.75, "y":2 }, + { "x":9.75, "y":2 }, + { "x":10.75, "y":2 }, + { "x":11.75, "y":2 }, + { "x":12.75, "y":2 }, + { "x":13.75, "y":1, "w":1.25, "h":2 }, + { "x":15, "y":2 }, + + { "x":0, "y":3, "w":1.25 }, + { "x":1.25, "y":3 }, + { "x":2.25, "y":3 }, + { "x":3.25, "y":3 }, + { "x":4.25, "y":3 }, + { "x":5.25, "y":3 }, + { "x":6.25, "y":3 }, + { "x":7.25, "y":3 }, + { "x":8.25, "y":3 }, + { "x":9.25, "y":3 }, + { "x":10.25, "y":3 }, + { "x":11.25, "y":3 }, + { "x":12.25, "y":3, "w":1.75 }, + { "x":14, "y":3 }, + { "x":15, "y":3 }, + + { "x":0, "y":4, "w":1.25 }, + { "x":1.25, "y":4, "w":1.25 }, + { "x":2.5, "y":4, "w":1.25 }, + { "x":3.75, "y":4, "w":6.25 }, + { "x":10, "y":4, "w":1.25 }, + { "x":11.25, "y":4, "w":1.25 }, + { "x":13, "y":4 }, + { "x":14, "y":4 }, + { "x":15, "y":4 } + ] + }, + "LAYOUT_65_iso_blocker": { "layout": [ { "x":0, "y":0 }, { "x":1, "y":0 }, @@ -303,6 +386,82 @@ { "x":14, "y":4 }, { "x":15, "y":4 } ] + }, + "LAYOUT_65_iso_blocker_tsangan_split_bs": { + "layout": [ + { "x":0, "y":0 }, + { "x":1, "y":0 }, + { "x":2, "y":0 }, + { "x":3, "y":0 }, + { "x":4, "y":0 }, + { "x":5, "y":0 }, + { "x":6, "y":0 }, + { "x":7, "y":0 }, + { "x":8, "y":0 }, + { "x":9, "y":0 }, + { "x":10, "y":0 }, + { "x":11, "y":0 }, + { "x":12, "y":0 }, + { "x":13, "y":0 }, + { "x":14, "y":0 }, + { "x":15, "y":0 }, + + { "x":0, "y":1, "w":1.5 }, + { "x":1.5, "y":1 }, + { "x":2.5, "y":1 }, + { "x":3.5, "y":1 }, + { "x":4.5, "y":1 }, + { "x":5.5, "y":1 }, + { "x":6.5, "y":1 }, + { "x":7.5, "y":1 }, + { "x":8.5, "y":1 }, + { "x":9.5, "y":1 }, + { "x":10.5, "y":1 }, + { "x":11.5, "y":1 }, + { "x":12.5, "y":1 }, + { "x":15, "y":1 }, + + { "x":0, "y":2, "w":1.75 }, + { "x":1.75, "y":2 }, + { "x":2.75, "y":2 }, + { "x":3.75, "y":2 }, + { "x":4.75, "y":2 }, + { "x":5.75, "y":2 }, + { "x":6.75, "y":2 }, + { "x":7.75, "y":2 }, + { "x":8.75, "y":2 }, + { "x":9.75, "y":2 }, + { "x":10.75, "y":2 }, + { "x":11.75, "y":2 }, + { "x":12.75, "y":2 }, + { "x":13.75, "y":1, "w":1.25, "h":2 }, + { "x":15, "y":2 }, + + { "x":0, "y":3, "w":1.25 }, + { "x":1.25, "y":3 }, + { "x":2.25, "y":3 }, + { "x":3.25, "y":3 }, + { "x":4.25, "y":3 }, + { "x":5.25, "y":3 }, + { "x":6.25, "y":3 }, + { "x":7.25, "y":3 }, + { "x":8.25, "y":3 }, + { "x":9.25, "y":3 }, + { "x":10.25, "y":3 }, + { "x":11.25, "y":3 }, + { "x":12.25, "y":3, "w":1.75 }, + { "x":14, "y":3 }, + { "x":15, "y":3 }, + + { "x":0, "y":4, "w":1.5 }, + { "x":1.5, "y":4, "w":1 }, + { "x":2.5, "y":4, "w":1.5 }, + { "x":4, "y":4, "w":7 }, + { "x":11, "y":4, "w":1.5 }, + { "x":13, "y":4 }, + { "x":14, "y":4 }, + { "x":15, "y":4 } + ] } } } diff --git a/keyboards/portal_66/soldered/keymaps/default/keymap.c b/keyboards/portal_66/soldered/keymaps/default/keymap.c index 3260f412a2..8b40550b86 100644 --- a/keyboards/portal_66/soldered/keymaps/default/keymap.c +++ b/keyboards/portal_66/soldered/keymaps/default/keymap.c @@ -21,14 +21,14 @@ enum layer_names { }; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_BASE] = LAYOUT_65_ansi_split_bs( + [_BASE] = LAYOUT_65_ansi_blocker_split_bs( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_HOME, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_END, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(_FN), KC_LEFT, KC_DOWN, KC_RGHT ), - [_FN] = LAYOUT_65_ansi_split_bs( + [_FN] = LAYOUT_65_ansi_blocker_split_bs( RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, diff --git a/keyboards/portal_66/soldered/keymaps/via/keymap.c b/keyboards/portal_66/soldered/keymaps/via/keymap.c index 7ea1f44b0b..97c74de1f1 100644 --- a/keyboards/portal_66/soldered/keymaps/via/keymap.c +++ b/keyboards/portal_66/soldered/keymaps/via/keymap.c @@ -23,28 +23,28 @@ enum layer_names { }; const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - [_L0] = LAYOUT_65_ansi_split_bs( + [_L0] = LAYOUT_65_ansi_blocker_split_bs( KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_HOME, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_END, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(_L1), KC_LEFT, KC_DOWN, KC_RGHT ), - [_L1] = LAYOUT_65_ansi_split_bs( + [_L1] = LAYOUT_65_ansi_blocker_split_bs( RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), - [_L2] = LAYOUT_65_ansi_split_bs( + [_L2] = LAYOUT_65_ansi_blocker_split_bs( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ ), - [_L3] = LAYOUT_65_ansi_split_bs( + [_L3] = LAYOUT_65_ansi_blocker_split_bs( _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, diff --git a/keyboards/portal_66/soldered/rules.mk b/keyboards/portal_66/soldered/rules.mk index 9906266f48..01798d604f 100644 --- a/keyboards/portal_66/soldered/rules.mk +++ b/keyboards/portal_66/soldered/rules.mk @@ -19,3 +19,5 @@ NKRO_ENABLE = no # USB Nkey Rollover BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow AUDIO_ENABLE = no # Audio output + +LAYOUTS = 65_ansi_blocker 65_ansi_blocker_split_bs 65_iso_blocker 65_iso_blocker_split_bs diff --git a/keyboards/portal_66/soldered/soldered.h b/keyboards/portal_66/soldered/soldered.h index 9fde7850d7..b2ae9cbaac 100644 --- a/keyboards/portal_66/soldered/soldered.h +++ b/keyboards/portal_66/soldered/soldered.h @@ -18,58 +18,105 @@ #include "quantum.h" -#define LAYOUT_65_ansi_split_bs( \ - k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k013, k014, k015, \ - k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, k115, \ - k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k213, k215, \ - k300, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, k315, \ - k400, k401, k402, k406, k409, k411, k412, k413, k415 \ +#define XXX KC_NO + +/* + * ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐ ┌───────┐ + * │00 │01 │02 │03 │04 │05 │06 │07 │08 │09 │0A │0B │0C │0D │0E │0F │ │0E │ 2u Backspace + * ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┤ └─┬─────┤ + * │10 │11 │12 │13 │14 │15 │16 │17 │18 │19 │1A │1B │1C │1D │1F │ │ │ + * ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤ ┌──┴┐2D │ ISO Enter + * │20 │21 │22 │23 │24 │25 │26 │27 │28 │29 │2A │2B │2D │2F │ │2C │ │ + * ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤ └───┴────┘ + * │30 │32 │33 │34 │35 │36 │37 │38 │39 │3A │3B │3C │3D │3F │ + * ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┼───┴┬─┬───┼───┼───┤ + * │40 │41 │42 │46 │49 │4B │ │4C │4D │4F │ + * └────┴────┴────┴────────────────────────┴────┴────┘ └───┴───┴───┘ + * ┌─────┬───┬─────┬───────────────────────────┬─────┐ + * │40 │41 │42 │46 │4B │ Tsangan + * └─────┴───┴─────┴───────────────────────────┴─────┘ + */ + +#define LAYOUT_65_ansi_blocker_split_bs( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1F, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2D, k2F, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3F, \ + k40, k41, k42, k46, k49, k4B, k4C, k4D, k4F \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, XXX, k1F }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, XXX, k2D, XXX, k2F }, \ + { k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, XXX, k3F }, \ + { k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, k49, XXX, k4B, k4C, k4D, XXX, k4F } \ +} + +#define LAYOUT_65_ansi_blocker( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0E, k0F, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1F, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2D, k2F, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3F, \ + k40, k41, k42, k46, k49, k4B, k4C, k4D, k4F \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, XXX, k0E, k0F }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, XXX, k1F }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, XXX, k2D, XXX, k2F }, \ + { k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, XXX, k3F }, \ + { k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, k49, XXX, k4B, k4C, k4D, XXX, k4F } \ +} + +#define LAYOUT_65_ansi_blocker_tsangan_split_bs( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1F, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2D, k2F, \ + k30, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3F, \ + k40, k41, k42, k46, k4B, k4C, k4D, k4F \ ) { \ - { k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k013, k014, k015 }, \ - { k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, KC_NO, k115 }, \ - { k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, KC_NO, k213, KC_NO, k215 }, \ - { k300, KC_NO, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, KC_NO, k315 }, \ - { k400, k401, k402, KC_NO, KC_NO, KC_NO, k406, KC_NO, KC_NO, k409, KC_NO, k411, k412, k413, KC_NO, k415 } \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, XXX, k1F }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, XXX, k2D, XXX, k2F }, \ + { k30, XXX, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, XXX, k3F }, \ + { k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, XXX, k4B, k4C, k4D, XXX, k4F } \ } -#define LAYOUT_65_ansi( \ - k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k014, k015, \ - k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, k115, \ - k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k213, k215, \ - k300, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, k315, \ - k400, k401, k402, k406, k409, k411, k412, k413, k415 \ +#define LAYOUT_65_iso_blocker_split_bs( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1F, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2F, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3F, \ + k40, k41, k42, k46, k49, k4B, k4C, k4D, k4F \ ) { \ - { k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, KC_NO, k014, k015 }, \ - { k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, KC_NO, k115 }, \ - { k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, KC_NO, k213, KC_NO, k215 }, \ - { k300, KC_NO, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, KC_NO, k315 }, \ - { k400, k401, k402, KC_NO, KC_NO, KC_NO, k406, KC_NO, KC_NO, k409, KC_NO, k411, k412, k413, KC_NO, k415 } \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, XXX, XXX, k1F }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, XXX, k2F }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, XXX, k3F }, \ + { k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, k49, XXX, k4B, k4C, k4D, XXX, k4F } \ } -#define LAYOUT_65_tsangan_split_bs( \ - k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k013, k014, k015, \ - k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, k115, \ - k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k213, k215, \ - k300, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, k315, \ - k400, k401, k402, k406, k411, k412, k413, k415 \ +#define LAYOUT_65_iso_blocker( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0E, k0F, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1F, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2F, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3F, \ + k40, k41, k42, k46, k49, k4B, k4C, k4D, k4F \ ) { \ - { k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k013, k014, k015 }, \ - { k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k113, KC_NO, k115 }, \ - { k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, KC_NO, k213, KC_NO, k215 }, \ - { k300, KC_NO, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, KC_NO, k315 }, \ - { k400, k401, k402, KC_NO, KC_NO, KC_NO, k406, KC_NO, KC_NO, KC_NO, KC_NO, k411, k412, k413, KC_NO, k415 } \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, XXX, k0E, k0F }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, XXX, XXX, k1F }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, XXX, k2F }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, XXX, k3F }, \ + { k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, k49, XXX, k4B, k4C, k4D, XXX, k4F } \ } -#define LAYOUT_65_iso( \ - k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, k014, k015, \ - k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, k115, \ - k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k212, k213, k215, \ - k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, k315, \ - k400, k401, k402, k406, k409, k411, k412, k413, k415 \ +#define LAYOUT_65_iso_blocker_tsangan_split_bs( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1F, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2F, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3F, \ + k40, k41, k42, k46, k4B, k4C, k4D, k4F \ ) { \ - { k000, k001, k002, k003, k004, k005, k006, k007, k008, k009, k010, k011, k012, KC_NO, k014, k015 }, \ - { k100, k101, k102, k103, k104, k105, k106, k107, k108, k109, k110, k111, k112, KC_NO, KC_NO, k115 }, \ - { k200, k201, k202, k203, k204, k205, k206, k207, k208, k209, k210, k211, k212, k213, KC_NO, k215 }, \ - { k300, k301, k302, k303, k304, k305, k306, k307, k308, k309, k310, k311, k312, k313, KC_NO, k315 }, \ - { k400, k401, k402, KC_NO, KC_NO, KC_NO, k406, KC_NO, KC_NO, k409, KC_NO, k411, k412, k413, KC_NO, k415 } \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, k0F }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, XXX, XXX, k1F }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, XXX, k2F }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, XXX, k3F }, \ + { k40, k41, k42, XXX, XXX, XXX, k46, XXX, XXX, XXX, XXX, k4B, k4C, k4D, XXX, k4F } \ } From 796db50895a62179ea40e6b9c38f5a21e707f166 Mon Sep 17 00:00:00 2001 From: MechMerlin <30334081+mechmerlin@users.noreply.github.com> Date: Tue, 23 Nov 2021 21:32:46 -0800 Subject: [PATCH 574/595] New Keyboard: TGR Jane CE (#14713) * move ce and v2ce into their own directories * update copyright notices * change LAYOUT macro names * remove community layout support for the original layouts * fix LAYOUT macro names * change info.json for the common layouts * fix tsangan LAYOUT * fix layout all * Update keyboards/tgr/jane/v2ce/keymaps/via/config.h Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/tgr/jane/v2ce/v2ce.c Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/tgr/jane/v2ce/config.h Co-authored-by: Drashna Jaelre <drashna@live.com> * remove unneeded file * one more time for good measure * Update keyboards/tgr/jane/v2ce/rules.mk Co-authored-by: Drashna Jaelre <drashna@live.com> * Update keyboards/tgr/jane/v2ce/rules.mk Co-authored-by: Drashna Jaelre <drashna@live.com> Co-authored-by: Drashna Jaelre <drashna@live.com> --- keyboards/tgr/jane/{ => v2/keymaps}/config.h | 0 .../jane/{ => v2}/keymaps/default/config.h | 0 .../jane/{ => v2}/keymaps/default/keymap.c | 0 .../jane/{ => v2}/keymaps/default/readme.md | 0 keyboards/tgr/jane/{ => v2/keymaps}/info.json | 0 keyboards/tgr/jane/{ => v2/keymaps}/jane.c | 0 keyboards/tgr/jane/{ => v2/keymaps}/jane.h | 0 keyboards/tgr/jane/{ => v2/keymaps}/readme.md | 0 keyboards/tgr/jane/{ => v2/keymaps}/rules.mk | 0 .../tgr/jane/{ => v2}/keymaps/via/config.h | 0 .../tgr/jane/{ => v2}/keymaps/via/keymap.c | 0 .../tgr/jane/{ => v2}/keymaps/via/rules.mk | 0 keyboards/tgr/jane/v2ce/config.h | 42 +++++++ keyboards/tgr/jane/v2ce/info.json | 28 +++++ .../tgr/jane/v2ce/keymaps/default/keymap.c | 27 +++++ .../tgr/jane/v2ce/keymaps/default/readme.md | 1 + keyboards/tgr/jane/v2ce/keymaps/via/config.h | 19 +++ keyboards/tgr/jane/v2ce/keymaps/via/keymap.c | 43 +++++++ keyboards/tgr/jane/v2ce/keymaps/via/rules.mk | 2 + keyboards/tgr/jane/v2ce/readme.md | 19 +++ keyboards/tgr/jane/v2ce/rules.mk | 19 +++ keyboards/tgr/jane/v2ce/v2ce.c | 17 +++ keyboards/tgr/jane/v2ce/v2ce.h | 113 ++++++++++++++++++ 23 files changed, 330 insertions(+) rename keyboards/tgr/jane/{ => v2/keymaps}/config.h (100%) rename keyboards/tgr/jane/{ => v2}/keymaps/default/config.h (100%) rename keyboards/tgr/jane/{ => v2}/keymaps/default/keymap.c (100%) rename keyboards/tgr/jane/{ => v2}/keymaps/default/readme.md (100%) rename keyboards/tgr/jane/{ => v2/keymaps}/info.json (100%) rename keyboards/tgr/jane/{ => v2/keymaps}/jane.c (100%) rename keyboards/tgr/jane/{ => v2/keymaps}/jane.h (100%) rename keyboards/tgr/jane/{ => v2/keymaps}/readme.md (100%) rename keyboards/tgr/jane/{ => v2/keymaps}/rules.mk (100%) rename keyboards/tgr/jane/{ => v2}/keymaps/via/config.h (100%) rename keyboards/tgr/jane/{ => v2}/keymaps/via/keymap.c (100%) rename keyboards/tgr/jane/{ => v2}/keymaps/via/rules.mk (100%) create mode 100644 keyboards/tgr/jane/v2ce/config.h create mode 100644 keyboards/tgr/jane/v2ce/info.json create mode 100644 keyboards/tgr/jane/v2ce/keymaps/default/keymap.c create mode 100644 keyboards/tgr/jane/v2ce/keymaps/default/readme.md create mode 100644 keyboards/tgr/jane/v2ce/keymaps/via/config.h create mode 100644 keyboards/tgr/jane/v2ce/keymaps/via/keymap.c create mode 100644 keyboards/tgr/jane/v2ce/keymaps/via/rules.mk create mode 100644 keyboards/tgr/jane/v2ce/readme.md create mode 100644 keyboards/tgr/jane/v2ce/rules.mk create mode 100644 keyboards/tgr/jane/v2ce/v2ce.c create mode 100644 keyboards/tgr/jane/v2ce/v2ce.h diff --git a/keyboards/tgr/jane/config.h b/keyboards/tgr/jane/v2/keymaps/config.h similarity index 100% rename from keyboards/tgr/jane/config.h rename to keyboards/tgr/jane/v2/keymaps/config.h diff --git a/keyboards/tgr/jane/keymaps/default/config.h b/keyboards/tgr/jane/v2/keymaps/default/config.h similarity index 100% rename from keyboards/tgr/jane/keymaps/default/config.h rename to keyboards/tgr/jane/v2/keymaps/default/config.h diff --git a/keyboards/tgr/jane/keymaps/default/keymap.c b/keyboards/tgr/jane/v2/keymaps/default/keymap.c similarity index 100% rename from keyboards/tgr/jane/keymaps/default/keymap.c rename to keyboards/tgr/jane/v2/keymaps/default/keymap.c diff --git a/keyboards/tgr/jane/keymaps/default/readme.md b/keyboards/tgr/jane/v2/keymaps/default/readme.md similarity index 100% rename from keyboards/tgr/jane/keymaps/default/readme.md rename to keyboards/tgr/jane/v2/keymaps/default/readme.md diff --git a/keyboards/tgr/jane/info.json b/keyboards/tgr/jane/v2/keymaps/info.json similarity index 100% rename from keyboards/tgr/jane/info.json rename to keyboards/tgr/jane/v2/keymaps/info.json diff --git a/keyboards/tgr/jane/jane.c b/keyboards/tgr/jane/v2/keymaps/jane.c similarity index 100% rename from keyboards/tgr/jane/jane.c rename to keyboards/tgr/jane/v2/keymaps/jane.c diff --git a/keyboards/tgr/jane/jane.h b/keyboards/tgr/jane/v2/keymaps/jane.h similarity index 100% rename from keyboards/tgr/jane/jane.h rename to keyboards/tgr/jane/v2/keymaps/jane.h diff --git a/keyboards/tgr/jane/readme.md b/keyboards/tgr/jane/v2/keymaps/readme.md similarity index 100% rename from keyboards/tgr/jane/readme.md rename to keyboards/tgr/jane/v2/keymaps/readme.md diff --git a/keyboards/tgr/jane/rules.mk b/keyboards/tgr/jane/v2/keymaps/rules.mk similarity index 100% rename from keyboards/tgr/jane/rules.mk rename to keyboards/tgr/jane/v2/keymaps/rules.mk diff --git a/keyboards/tgr/jane/keymaps/via/config.h b/keyboards/tgr/jane/v2/keymaps/via/config.h similarity index 100% rename from keyboards/tgr/jane/keymaps/via/config.h rename to keyboards/tgr/jane/v2/keymaps/via/config.h diff --git a/keyboards/tgr/jane/keymaps/via/keymap.c b/keyboards/tgr/jane/v2/keymaps/via/keymap.c similarity index 100% rename from keyboards/tgr/jane/keymaps/via/keymap.c rename to keyboards/tgr/jane/v2/keymaps/via/keymap.c diff --git a/keyboards/tgr/jane/keymaps/via/rules.mk b/keyboards/tgr/jane/v2/keymaps/via/rules.mk similarity index 100% rename from keyboards/tgr/jane/keymaps/via/rules.mk rename to keyboards/tgr/jane/v2/keymaps/via/rules.mk diff --git a/keyboards/tgr/jane/v2ce/config.h b/keyboards/tgr/jane/v2ce/config.h new file mode 100644 index 0000000000..e6f6e99e7d --- /dev/null +++ b/keyboards/tgr/jane/v2ce/config.h @@ -0,0 +1,42 @@ +/* Copyright 2021 MechMerlin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include "config_common.h" + +#define VENDOR_ID 0x5447 // TG +#define PRODUCT_ID 0x4A43 // JC +#define DEVICE_VER 0x0200 +#define MANUFACTURER TGR +#define PRODUCT Jane + +#define MATRIX_ROWS 8 +#define MATRIX_COLS 15 + +// 0 1 2 3 4 5 6 7 8 9 A B C D E +#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7 } +#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7 } +#define UNUSED_PINS + +#define DIODE_DIRECTION COL2ROW +#define DEBOUNCE 5 + +#define BACKLIGHT_PIN D4 +#define BACKLIGHT_LEVELS 3 + +#define LED_CAPS_LOCK_PIN D1 +#define LED_NUM_LOCK_PIN D6 diff --git a/keyboards/tgr/jane/v2ce/info.json b/keyboards/tgr/jane/v2ce/info.json new file mode 100644 index 0000000000..bc9970fe78 --- /dev/null +++ b/keyboards/tgr/jane/v2ce/info.json @@ -0,0 +1,28 @@ +{ + "keyboard_name": "TGR Jane v2 CE", + "url": "", + "maintainer": "qmk", + "width": 18.25, + "height": 6.5, + "layouts": { + "LAYOUT_all_f13": { + "layout": [{"x":0, "y":0}, {"x":1.25, "y":0}, {"x":2.25, "y":0}, {"x":3.25, "y":0}, {"x":4.25, "y":0}, {"x":5.5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.75, "y":0}, {"x":10.75, "y":0}, {"x":11.75, "y":0}, {"x":12.75, "y":0}, {"x":14, "y":0}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"x":17.25, "y":0}, {"x":0, "y":1.5}, {"x":1, "y":1.5}, {"x":2, "y":1.5}, {"x":3, "y":1.5}, {"x":4, "y":1.5}, {"x":5, "y":1.5}, {"x":6, "y":1.5}, {"x":7, "y":1.5}, {"x":8, "y":1.5}, {"x":9, "y":1.5}, {"x":10, "y":1.5}, {"x":11, "y":1.5}, {"x":12, "y":1.5}, {"x":13, "y":1.5}, {"x":14, "y":1.5}, {"x":15.25, "y":1.5}, {"x":16.25, "y":1.5}, {"x":17.25, "y":1.5}, {"x":0, "y":2.5, "w":1.5}, {"x":1.5, "y":2.5}, {"x":2.5, "y":2.5}, {"x":3.5, "y":2.5}, {"x":4.5, "y":2.5}, {"x":5.5, "y":2.5}, {"x":6.5, "y":2.5}, {"x":7.5, "y":2.5}, {"x":8.5, "y":2.5}, {"x":9.5, "y":2.5}, {"x":10.5, "y":2.5}, {"x":11.5, "y":2.5}, {"x":12.5, "y":2.5}, {"x":13.5, "y":2.5, "w":1.5}, {"x":15.25, "y":2.5}, {"x":16.25, "y":2.5}, {"x":17.25, "y":2.5}, {"x":0, "y":3.5, "w":1.75}, {"x":1.75, "y":3.5}, {"x":2.75, "y":3.5}, {"x":3.75, "y":3.5}, {"x":4.75, "y":3.5}, {"x":5.75, "y":3.5}, {"x":6.75, "y":3.5}, {"x":7.75, "y":3.5}, {"x":8.75, "y":3.5}, {"x":9.75, "y":3.5}, {"x":10.75, "y":3.5}, {"x":11.75, "y":3.5}, {"x":12.75, "y":3.5}, {"x":13.75, "y":3.5, "w":1.25}, {"x":0, "y":4.5, "w":1.25}, {"x":1.25, "y":4.5}, {"x":2.25, "y":4.5}, {"x":3.25, "y":4.5}, {"x":4.25, "y":4.5}, {"x":5.25, "y":4.5}, {"x":6.25, "y":4.5}, {"x":7.25, "y":4.5}, {"x":8.25, "y":4.5}, {"x":9.25, "y":4.5}, {"x":10.25, "y":4.5}, {"x":11.25, "y":4.5}, {"x":12.25, "y":4.5, "w":1.75}, {"x":14, "y":4.5}, {"x":16.25, "y":4.5}, {"x":0, "y":5.5, "w":1.25}, {"x":1.25, "y":5.5}, {"x":2.25, "y":5.5}, {"x":3.25, "y":5.5, "w":1.25}, {"x":4.5, "y":5.5, "w":1.25}, {"x":5.75, "y":5.5, "w":1.25}, {"x":7, "y":5.5, "w":1.25}, {"x":8.25, "y":5.5, "w":1.25}, {"x":9.5, "y":5.5, "w":1.25}, {"x":10.75, "y":5.5}, {"x":11.75, "y":5.5}, {"x":12.75, "y":5.5}, {"x":13.75, "y":5.5, "w":1.25}, {"x":15.25, "y":5.5}, {"x":16.25, "y":5.5}, {"x":17.25, "y":5.5}] + }, + + "LAYOUT_tkl_ansi_f13": { + "layout": [{"x":0, "y":0}, {"x":1.25, "y":0}, {"x":2.25, "y":0}, {"x":3.25, "y":0}, {"x":4.25, "y":0}, {"x":5.5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.75, "y":0}, {"x":10.75, "y":0}, {"x":11.75, "y":0}, {"x":12.75, "y":0}, {"x":14, "y":0}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"x":17.25, "y":0}, {"x":0, "y":1.5}, {"x":1, "y":1.5}, {"x":2, "y":1.5}, {"x":3, "y":1.5}, {"x":4, "y":1.5}, {"x":5, "y":1.5}, {"x":6, "y":1.5}, {"x":7, "y":1.5}, {"x":8, "y":1.5}, {"x":9, "y":1.5}, {"x":10, "y":1.5}, {"x":11, "y":1.5}, {"x":12, "y":1.5}, {"x":13, "y":1.5, "w":2}, {"x":15.25, "y":1.5}, {"x":16.25, "y":1.5}, {"x":17.25, "y":1.5}, {"x":0, "y":2.5, "w":1.5}, {"x":1.5, "y":2.5}, {"x":2.5, "y":2.5}, {"x":3.5, "y":2.5}, {"x":4.5, "y":2.5}, {"x":5.5, "y":2.5}, {"x":6.5, "y":2.5}, {"x":7.5, "y":2.5}, {"x":8.5, "y":2.5}, {"x":9.5, "y":2.5}, {"x":10.5, "y":2.5}, {"x":11.5, "y":2.5}, {"x":12.5, "y":2.5}, {"x":13.5, "y":2.5, "w":1.5}, {"x":15.25, "y":2.5}, {"x":16.25, "y":2.5}, {"x":17.25, "y":2.5}, {"x":0, "y":3.5, "w":1.75}, {"x":1.75, "y":3.5}, {"x":2.75, "y":3.5}, {"x":3.75, "y":3.5}, {"x":4.75, "y":3.5}, {"x":5.75, "y":3.5}, {"x":6.75, "y":3.5}, {"x":7.75, "y":3.5}, {"x":8.75, "y":3.5}, {"x":9.75, "y":3.5}, {"x":10.75, "y":3.5}, {"x":11.75, "y":3.5}, {"x":12.75, "y":3.5, "w":2.25}, {"x":0, "y":4.5, "w":2.25}, {"x":2.25, "y":4.5}, {"x":3.25, "y":4.5}, {"x":4.25, "y":4.5}, {"x":5.25, "y":4.5}, {"x":6.25, "y":4.5}, {"x":7.25, "y":4.5}, {"x":8.25, "y":4.5}, {"x":9.25, "y":4.5}, {"x":10.25, "y":4.5}, {"x":11.25, "y":4.5}, {"x":12.25, "y":4.5, "w":2.75}, {"x":16.25, "y":4.5}, {"x":0, "y":5.5, "w":1.25}, {"x":1.25, "y":5.5, "w":1.25}, {"x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"x":10, "y":5.5, "w":1.25}, {"x":11.25, "y":5.5, "w":1.25}, {"x":12.5, "y":5.5, "w":1.25}, {"x":13.75, "y":5.5, "w":1.25}, {"x":15.25, "y":5.5}, {"x":16.25, "y":5.5}, {"x":17.25, "y":5.5}] + }, + + "LAYOUT_tkl_ansi_tsangan_f13": { + "layout": [{"x":0, "y":0}, {"x":1.25, "y":0}, {"x":2.25, "y":0}, {"x":3.25, "y":0}, {"x":4.25, "y":0}, {"x":5.5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.75, "y":0}, {"x":10.75, "y":0}, {"x":11.75, "y":0}, {"x":12.75, "y":0}, {"x":14, "y":0}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"x":17.25, "y":0}, {"x":0, "y":1.5}, {"x":1, "y":1.5}, {"x":2, "y":1.5}, {"x":3, "y":1.5}, {"x":4, "y":1.5}, {"x":5, "y":1.5}, {"x":6, "y":1.5}, {"x":7, "y":1.5}, {"x":8, "y":1.5}, {"x":9, "y":1.5}, {"x":10, "y":1.5}, {"x":11, "y":1.5}, {"x":12, "y":1.5}, {"x":13, "y":1.5, "w":2}, {"x":15.25, "y":1.5}, {"x":16.25, "y":1.5}, {"x":17.25, "y":1.5}, {"x":0, "y":2.5, "w":1.5}, {"x":1.5, "y":2.5}, {"x":2.5, "y":2.5}, {"x":3.5, "y":2.5}, {"x":4.5, "y":2.5}, {"x":5.5, "y":2.5}, {"x":6.5, "y":2.5}, {"x":7.5, "y":2.5}, {"x":8.5, "y":2.5}, {"x":9.5, "y":2.5}, {"x":10.5, "y":2.5}, {"x":11.5, "y":2.5}, {"x":12.5, "y":2.5}, {"x":13.5, "y":2.5, "w":1.5}, {"x":15.25, "y":2.5}, {"x":16.25, "y":2.5}, {"x":17.25, "y":2.5}, {"x":0, "y":3.5, "w":1.75}, {"x":1.75, "y":3.5}, {"x":2.75, "y":3.5}, {"x":3.75, "y":3.5}, {"x":4.75, "y":3.5}, {"x":5.75, "y":3.5}, {"x":6.75, "y":3.5}, {"x":7.75, "y":3.5}, {"x":8.75, "y":3.5}, {"x":9.75, "y":3.5}, {"x":10.75, "y":3.5}, {"x":11.75, "y":3.5}, {"x":12.75, "y":3.5, "w":2.25}, {"x":0, "y":4.5, "w":2.25}, {"x":2.25, "y":4.5}, {"x":3.25, "y":4.5}, {"x":4.25, "y":4.5}, {"x":5.25, "y":4.5}, {"x":6.25, "y":4.5}, {"x":7.25, "y":4.5}, {"x":8.25, "y":4.5}, {"x":9.25, "y":4.5}, {"x":10.25, "y":4.5}, {"x":11.25, "y":4.5}, {"x":12.25, "y":4.5, "w":1.75}, {"x":14, "y":4.5}, {"x":16.25, "y":4.5}, {"x":0, "y":5.5, "w":1.5}, {"x":1.5, "y":5.5}, {"x":2.5, "y":5.5, "w":1.5}, {"x":4, "y":5.5, "w":7}, {"x":11, "y":5.5, "w":1.5}, {"x":12.5, "y":5.5}, {"x":13.5, "y":5.5, "w":1.5}, {"x":15.25, "y":5.5}, {"x":16.25, "y":5.5}, {"x":17.25, "y":5.5}] + }, + + "LAYOUT_tkl_iso_f13": { + "layout": [{"x":0, "y":0}, {"x":1.25, "y":0}, {"x":2.25, "y":0}, {"x":3.25, "y":0}, {"x":4.25, "y":0}, {"x":5.5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.75, "y":0}, {"x":10.75, "y":0}, {"x":11.75, "y":0}, {"x":12.75, "y":0}, {"x":14, "y":0}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"x":17.25, "y":0}, {"x":0, "y":1.5}, {"x":1, "y":1.5}, {"x":2, "y":1.5}, {"x":3, "y":1.5}, {"x":4, "y":1.5}, {"x":5, "y":1.5}, {"x":6, "y":1.5}, {"x":7, "y":1.5}, {"x":8, "y":1.5}, {"x":9, "y":1.5}, {"x":10, "y":1.5}, {"x":11, "y":1.5}, {"x":12, "y":1.5}, {"x":13, "y":1.5, "w":2}, {"x":15.25, "y":1.5}, {"x":16.25, "y":1.5}, {"x":17.25, "y":1.5}, {"x":0, "y":2.5, "w":1.5}, {"x":1.5, "y":2.5}, {"x":2.5, "y":2.5}, {"x":3.5, "y":2.5}, {"x":4.5, "y":2.5}, {"x":5.5, "y":2.5}, {"x":6.5, "y":2.5}, {"x":7.5, "y":2.5}, {"x":8.5, "y":2.5}, {"x":9.5, "y":2.5}, {"x":10.5, "y":2.5}, {"x":11.5, "y":2.5}, {"x":12.5, "y":2.5}, {"x":13.75, "y":2.5, "w":1.25, "h":2}, {"x":15.25, "y":2.5}, {"x":16.25, "y":2.5}, {"x":17.25, "y":2.5}, {"x":0, "y":3.5, "w":1.75}, {"x":1.75, "y":3.5}, {"x":2.75, "y":3.5}, {"x":3.75, "y":3.5}, {"x":4.75, "y":3.5}, {"x":5.75, "y":3.5}, {"x":6.75, "y":3.5}, {"x":7.75, "y":3.5}, {"x":8.75, "y":3.5}, {"x":9.75, "y":3.5}, {"x":10.75, "y":3.5}, {"x":11.75, "y":3.5}, {"x":12.75, "y":3.5}, {"x":0, "y":4.5, "w":1.25}, {"x":1.25, "y":4.5}, {"x":2.25, "y":4.5}, {"x":3.25, "y":4.5}, {"x":4.25, "y":4.5}, {"x":5.25, "y":4.5}, {"x":6.25, "y":4.5}, {"x":7.25, "y":4.5}, {"x":8.25, "y":4.5}, {"x":9.25, "y":4.5}, {"x":10.25, "y":4.5}, {"x":11.25, "y":4.5}, {"x":12.25, "y":4.5, "w":2.75}, {"x":16.25, "y":4.5}, {"x":0, "y":5.5, "w":1.25}, {"x":1.25, "y":5.5, "w":1.25}, {"x":2.5, "y":5.5, "w":1.25}, {"x":3.75, "y":5.5, "w":6.25}, {"x":10, "y":5.5, "w":1.25}, {"x":11.25, "y":5.5, "w":1.25}, {"x":12.5, "y":5.5, "w":1.25}, {"x":13.75, "y":5.5, "w":1.25}, {"x":15.25, "y":5.5}, {"x":16.25, "y":5.5}, {"x":17.25, "y":5.5}] + }, + + "LAYOUT_tkl_iso_tsangan_f13": { + "layout": [{"x":0, "y":0}, {"x":1.25, "y":0}, {"x":2.25, "y":0}, {"x":3.25, "y":0}, {"x":4.25, "y":0}, {"x":5.5, "y":0}, {"x":6.5, "y":0}, {"x":7.5, "y":0}, {"x":8.5, "y":0}, {"x":9.75, "y":0}, {"x":10.75, "y":0}, {"x":11.75, "y":0}, {"x":12.75, "y":0}, {"x":14, "y":0}, {"x":15.25, "y":0}, {"x":16.25, "y":0}, {"x":17.25, "y":0}, {"x":0, "y":1.5}, {"x":1, "y":1.5}, {"x":2, "y":1.5}, {"x":3, "y":1.5}, {"x":4, "y":1.5}, {"x":5, "y":1.5}, {"x":6, "y":1.5}, {"x":7, "y":1.5}, {"x":8, "y":1.5}, {"x":9, "y":1.5}, {"x":10, "y":1.5}, {"x":11, "y":1.5}, {"x":12, "y":1.5}, {"x":13, "y":1.5, "w":2}, {"x":15.25, "y":1.5}, {"x":16.25, "y":1.5}, {"x":17.25, "y":1.5}, {"x":0, "y":2.5, "w":1.5}, {"x":1.5, "y":2.5}, {"x":2.5, "y":2.5}, {"x":3.5, "y":2.5}, {"x":4.5, "y":2.5}, {"x":5.5, "y":2.5}, {"x":6.5, "y":2.5}, {"x":7.5, "y":2.5}, {"x":8.5, "y":2.5}, {"x":9.5, "y":2.5}, {"x":10.5, "y":2.5}, {"x":11.5, "y":2.5}, {"x":12.5, "y":2.5}, {"x":13.75, "y":2.5, "w":1.25, "h":2}, {"x":15.25, "y":2.5}, {"x":16.25, "y":2.5}, {"x":17.25, "y":2.5}, {"x":0, "y":3.5, "w":1.75}, {"x":1.75, "y":3.5}, {"x":2.75, "y":3.5}, {"x":3.75, "y":3.5}, {"x":4.75, "y":3.5}, {"x":5.75, "y":3.5}, {"x":6.75, "y":3.5}, {"x":7.75, "y":3.5}, {"x":8.75, "y":3.5}, {"x":9.75, "y":3.5}, {"x":10.75, "y":3.5}, {"x":11.75, "y":3.5}, {"x":12.75, "y":3.5}, {"x":0, "y":4.5, "w":1.25}, {"x":1.25, "y":4.5}, {"x":2.25, "y":4.5}, {"x":3.25, "y":4.5}, {"x":4.25, "y":4.5}, {"x":5.25, "y":4.5}, {"x":6.25, "y":4.5}, {"x":7.25, "y":4.5}, {"x":8.25, "y":4.5}, {"x":9.25, "y":4.5}, {"x":10.25, "y":4.5}, {"x":11.25, "y":4.5}, {"x":12.25, "y":4.5, "w":1.75}, {"x":14, "y":4.5}, {"x":16.25, "y":4.5}, {"x":0, "y":5.5, "w":1.5}, {"x":1.5, "y":5.5}, {"x":2.5, "y":5.5, "w":1.5}, {"x":4, "y":5.5, "w":7}, {"x":11, "y":5.5, "w":1.5}, {"x":12.5, "y":5.5}, {"x":13.5, "y":5.5, "w":1.5}, {"x":15.25, "y":5.5}, {"x":16.25, "y":5.5}, {"x":17.25, "y":5.5}] + } + } +} diff --git a/keyboards/tgr/jane/v2ce/keymaps/default/keymap.c b/keyboards/tgr/jane/v2ce/keymaps/default/keymap.c new file mode 100644 index 0000000000..45c09166fc --- /dev/null +++ b/keyboards/tgr/jane/v2ce/keymaps/default/keymap.c @@ -0,0 +1,27 @@ +/* Copyright 2019 MechMerlin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT_tkl_ansi_f13( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_PSCR,KC_SLCK,KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_INS ,KC_HOME,KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL ,KC_END ,KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP,KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT) +}; diff --git a/keyboards/tgr/jane/v2ce/keymaps/default/readme.md b/keyboards/tgr/jane/v2ce/keymaps/default/readme.md new file mode 100644 index 0000000000..983182da24 --- /dev/null +++ b/keyboards/tgr/jane/v2ce/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for Jane \ No newline at end of file diff --git a/keyboards/tgr/jane/v2ce/keymaps/via/config.h b/keyboards/tgr/jane/v2ce/keymaps/via/config.h new file mode 100644 index 0000000000..6e6f025fbb --- /dev/null +++ b/keyboards/tgr/jane/v2ce/keymaps/via/config.h @@ -0,0 +1,19 @@ +/* Copyright 2021 MechMerlin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#define DYNAMIC_KEYMAP_LAYER_COUNT 3 diff --git a/keyboards/tgr/jane/v2ce/keymaps/via/keymap.c b/keyboards/tgr/jane/v2ce/keymaps/via/keymap.c new file mode 100644 index 0000000000..47407346fa --- /dev/null +++ b/keyboards/tgr/jane/v2ce/keymaps/via/keymap.c @@ -0,0 +1,43 @@ +/* Copyright 2021 MechMerlin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +[0] = LAYOUT_tkl_ansi_f13( + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_F13, KC_PSCR,KC_SLCK,KC_PAUS, + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,KC_MINS, KC_EQL,KC_BSPC, KC_INS ,KC_HOME,KC_PGUP, + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,KC_LBRC,KC_RBRC,KC_BSLS, KC_DEL ,KC_END ,KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L,KC_SCLN,KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH, KC_RSFT, KC_UP, + KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP,KC_RCTL, KC_LEFT,KC_DOWN,KC_RGHT), + +[1] = LAYOUT_tkl_ansi_f13( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS), + +[2] = LAYOUT_tkl_ansi_f13( + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, + KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS), +}; diff --git a/keyboards/tgr/jane/v2ce/keymaps/via/rules.mk b/keyboards/tgr/jane/v2ce/keymaps/via/rules.mk new file mode 100644 index 0000000000..36b7ba9cbc --- /dev/null +++ b/keyboards/tgr/jane/v2ce/keymaps/via/rules.mk @@ -0,0 +1,2 @@ +VIA_ENABLE = yes +LTO_ENABLE = yes diff --git a/keyboards/tgr/jane/v2ce/readme.md b/keyboards/tgr/jane/v2ce/readme.md new file mode 100644 index 0000000000..20e949caa5 --- /dev/null +++ b/keyboards/tgr/jane/v2ce/readme.md @@ -0,0 +1,19 @@ +# Jane v2 CE + +TKL Custom Keyboard with F13 key + +* Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) +* Hardware Supported: TGR Jane CE (Pontoporia CE) PCB v1.2 +* Hardware Availability: [Geekhack Group Buy](https://geekhack.org/index.php?topic=100415.0) + +Make example for this keyboard (after setting up your build environment): + + make tgr/jane/v2ce:default + +Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) + + make tgr/jane/v2ce:default:flash + +**Reset Key**: Hold down the key located at *K00*, commonly programmed as *Esc* while plugging in the keyboard. + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/tgr/jane/v2ce/rules.mk b/keyboards/tgr/jane/v2ce/rules.mk new file mode 100644 index 0000000000..92e3fcec39 --- /dev/null +++ b/keyboards/tgr/jane/v2ce/rules.mk @@ -0,0 +1,19 @@ +# MCU name +MCU = atmega32a + +# Bootloader selection +BOOTLOADER = bootloadHID + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = yes # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +WS2812_DRIVER = i2c diff --git a/keyboards/tgr/jane/v2ce/v2ce.c b/keyboards/tgr/jane/v2ce/v2ce.c new file mode 100644 index 0000000000..6d478efce9 --- /dev/null +++ b/keyboards/tgr/jane/v2ce/v2ce.c @@ -0,0 +1,17 @@ +/* Copyright 2021 MechMerlin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "v2ce.h" diff --git a/keyboards/tgr/jane/v2ce/v2ce.h b/keyboards/tgr/jane/v2ce/v2ce.h new file mode 100644 index 0000000000..70f306912b --- /dev/null +++ b/keyboards/tgr/jane/v2ce/v2ce.h @@ -0,0 +1,113 @@ +/* Copyright 2021 MechMerlin + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#pragma once + +#include "quantum.h" + +// This a shortcut to help you visually see your layout. +// The first section contains all of the arguments +// The second converts the arguments into a two-dimensional array + +#define LAYOUT_all_f13( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k6A, k0D, k0E, k6B, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, k6C, k6D, k6E, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k7C, k7D, k7E, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, \ + k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k2E, \ + k50, k51, k52, k53, k54, k55, k57, k58, k59, k5A, k5B, k5C, k5D, k5E, k3E, k4E \ +){ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \ + { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E }, \ + { k50, k51, k52, k53, k54, k55, KC_NO, k57, k58, k59, k5A, k5B, k5C, k5D, k5E }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, k6A, k6B, k6C, k6D, k6E }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, k7C, k7D, k7E }, \ +} + + +#define LAYOUT_tkl_ansi_f13( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k6A, k0D, k0E, k6B, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k6C, k6D, k6E, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k7C, k7D, k7E, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3D, \ + k40, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k2E, \ + k50, k51, k52, k55, k58, k59, k5A, k5D, k5E, k3E, k4E \ +){ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, KC_NO }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, KC_NO, k3D, k3E }, \ + { k40, KC_NO, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, KC_NO, k4E }, \ + { k50, k51, k52, KC_NO, KC_NO, k55, KC_NO, KC_NO, k58, k59, k5A, KC_NO, KC_NO, k5D, k5E }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, k6A, k6B, k6C, k6D, k6E }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, k7C, k7D, k7E }, \ +} + +#define LAYOUT_tkl_ansi_tsangan_f13( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k6A, k0D, k0E, k6B, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k6C, k6D, k6E, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k7C, k7D, k7E, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3D, \ + k40, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k2E, \ + k50, k51, k52, k55, k58, k59, k5A, k5E, k3E, k4E \ +){ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, KC_NO }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, KC_NO, k3D, k3E }, \ + { k40, KC_NO, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E }, \ + { k50, k51, k52, KC_NO, KC_NO, k55, KC_NO, KC_NO, k58, k59, k5A, KC_NO, KC_NO, KC_NO, k5E }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, k6A, k6B, k6C, k6D, k6E }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, k7C, k7D, k7E }, \ +} + +#define LAYOUT_tkl_iso_f13( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k6A, k0D, k0E, k6B, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k6C, k6D, k6E, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k7C, k7D, k7E, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, \ + k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k2E, \ + k50, k51, k52, k55, k58, k59, k5A, k5D, k5E, k3E, k4E \ +){ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, KC_NO }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, KC_NO, k2E }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \ + { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, KC_NO, k4E }, \ + { k50, k51, k52, KC_NO, KC_NO, k55, KC_NO, KC_NO, k58, k59, k5A, KC_NO, KC_NO, k5D, k5E }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, k6A, k6B, k6C, k6D, k6E }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, k7C, k7D, k7E }, \ +} + +#define LAYOUT_tkl_iso_tsangan_f13( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k6A, k0D, k0E, k6B, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k6C, k6D, k6E, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k7C, k7D, k7E, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, \ + k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k2E, \ + k50, k51, k52, k55, k58, k59, k5A, k5E, k3E, k4E \ +){ \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, KC_NO }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, KC_NO, k2E }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \ + { k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E }, \ + { k50, k51, k52, KC_NO, KC_NO, k55, KC_NO, KC_NO, k58, k59, k5A, KC_NO, KC_NO, KC_NO, k5E }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, k6A, k6B, k6C, k6D, k6E }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, k7C, k7D, k7E }, \ +} From 59e15134771584899241738d57dad6bb86db3ced Mon Sep 17 00:00:00 2001 From: James Young <18669334+noroadsleft@users.noreply.github.com> Date: Wed, 24 Nov 2021 05:36:41 +0000 Subject: [PATCH 575/595] Revert "handwired/split89 Layout Macro Refactor (#15210)" (#15284) This reverts commit 26ae43219001dfe20aa525b6fb35f2aeb2b76617. Requested by jurassic73. --- keyboards/handwired/split89/info.json | 97 +------------------ .../split89/keymaps/default/keymap.c | 28 +++--- keyboards/handwired/split89/split89.h | 38 ++++---- 3 files changed, 33 insertions(+), 130 deletions(-) diff --git a/keyboards/handwired/split89/info.json b/keyboards/handwired/split89/info.json index 52e7e305d8..7147420f32 100644 --- a/keyboards/handwired/split89/info.json +++ b/keyboards/handwired/split89/info.json @@ -4,102 +4,7 @@ "url": "https://github.com/jurassic73/split89", "layouts": { "LAYOUT": { - "layout": [ - {"label":"Esc", "x":0, "y":0}, - {"label":"F1", "x":2, "y":0}, - {"label":"F2", "x":3, "y":0}, - {"label":"F3", "x":4, "y":0}, - {"label":"F4", "x":5, "y":0}, - {"label":"F5", "x":6, "y":0}, - {"label":"F6", "x":8.5, "y":0}, - {"label":"F7", "x":9.5, "y":0}, - {"label":"F8", "x":10.5, "y":0}, - {"label":"F9", "x":12.0, "y":0}, - {"label":"F10", "x":13.0, "y":0}, - {"label":"F11", "x":14.0, "y":0}, - {"label":"F12", "x":15.0, "y":0}, - {"label":"PrtSc", "x":16.25, "y":0}, - {"label":"Scroll Lock", "x":17.25, "y":0}, - {"label":"Pause", "x":18.25, "y":0}, - - {"label":"`~", "x":0, "y":1.25}, - {"label":"1!", "x":1, "y":1.25}, - {"label":"2@", "x":2, "y":1.25}, - {"label":"3#", "x":3, "y":1.25}, - {"label":"4$", "x":4, "y":1.25}, - {"label":"5%", "x":5, "y":1.25}, - {"label":"6^", "x":6, "y":1.25}, - {"label":"7&", "x":8.0, "y":1.25}, - {"label":"8*", "x":9.0, "y":1.25}, - {"label":"9(", "x":10.0, "y":1.25}, - {"label":"0)", "x":11.0, "y":1.25}, - {"label":"-_", "x":12.0, "y":1.25}, - {"label":"=+", "x":13.0, "y":1.25}, - {"label":"Backspace", "x":14.0, "y":1.25, "w":2}, - {"label":"Insert", "x":16.25, "y":1.25}, - {"label":"Home", "x":17.25, "y":1.25}, - {"label":"PgUp", "x":18.25, "y":1.25}, - - {"label":"Tab", "x":0, "y":2.25, "w":1.5}, - {"label":"Q", "x":1.5, "y":2.25}, - {"label":"W", "x":2.5, "y":2.25}, - {"label":"E", "x":3.5, "y":2.25}, - {"label":"R", "x":4.5, "y":2.25}, - {"label":"T", "x":5.5, "y":2.25}, - {"label":"Y", "x":7.5, "y":2.25}, - {"label":"U", "x":8.5, "y":2.25}, - {"label":"I", "x":9.5, "y":2.25}, - {"label":"O", "x":10.5, "y":2.25}, - {"label":"P", "x":11.5, "y":2.25}, - {"label":"[{", "x":12.5, "y":2.25}, - {"label":"]}", "x":13.5, "y":2.25}, - {"label":"\\|", "x":14.5, "y":2.25, "w":1.5}, - {"label":"Delete", "x":16.25, "y":2.25}, - {"label":"End", "x":17.25, "y":2.25}, - {"label":"PgDn", "x":18.25, "y":2.25}, - - {"label":"Caps Lock", "x":0, "y":3.25, "w":1.75}, - {"label":"A", "x":1.75, "y":3.25}, - {"label":"S", "x":2.75, "y":3.25}, - {"label":"D", "x":3.75, "y":3.25}, - {"label":"F", "x":4.75, "y":3.25}, - {"label":"G", "x":5.75, "y":3.25}, - {"label":"H", "x":7.75, "y":3.25}, - {"label":"J", "x":8.75, "y":3.25}, - {"label":"K", "x":9.75, "y":3.25}, - {"label":"L", "x":10.75, "y":3.25}, - {"label":";:", "x":11.75, "y":3.25}, - {"label":"'\"", "x":12.75, "y":3.25}, - {"label":"Enter", "x":13.75, "y":3.25, "w":2.25}, - - {"label":"Shift", "x":0, "y":4.25, "w":2.25}, - {"label":"Z", "x":2.25, "y":4.25}, - {"label":"X", "x":3.25, "y":4.25}, - {"label":"C", "x":4.25, "y":4.25}, - {"label":"V", "x":5.25, "y":4.25}, - {"label":"B", "x":6.25, "y":4.25}, - {"label":"N", "x":8.25, "y":4.25}, - {"label":"M", "x":9.25, "y":4.25}, - {"label":",<", "x":10.25, "y":4.25}, - {"label":".>", "x":11.25, "y":4.25}, - {"label":"/?", "x":12.25, "y":4.25}, - {"label":"Shift", "x":13.25, "y":4.25, "w":2.75}, - {"label":"\u2191", "x":17.25, "y":4.25}, - - {"label":"Ctrl", "x":0, "y":5.25, "w":1.25}, - {"label":"Fn", "x":1.25, "y":5.25, "w":1.25}, - {"label":"Win", "x":2.5, "y":5.25, "w":1.25}, - {"label":"Alt", "x":3.75, "y":5.25, "w":1.25}, - {"label":"Space", "x":5, "y":5.25, "w":2.25}, - {"label":"Space", "x":8.25, "y":5.25, "w":2.75}, - {"label":"Alt", "x":11.0, "y":5.25, "w":1.25}, - {"label":"Win", "x":12.25, "y":5.25, "w":1.25}, - {"label":"Menu", "x":13.5, "y":5.25, "w":1.25}, - {"label":"Ctrl", "x":14.75, "y":5.25, "w":1.25}, - {"label":"\u2190", "x":16.25, "y":5.25}, - {"label":"\u2193", "x":17.25, "y":5.25}, - {"label":"\u2192", "x":18.25, "y":5.25} - ] + "layout": [{"label":"Esc", "x":0, "y":0}, {"label":"F1", "x":2, "y":0}, {"label":"F2", "x":3, "y":0}, {"label":"F3", "x":4, "y":0}, {"label":"F4", "x":5, "y":0}, {"label":"F5", "x":6, "y":0}, {"label":"F6", "x":10.25, "y":0}, {"label":"F7", "x":11.25, "y":0}, {"label":"F8", "x":12.25, "y":0}, {"label":"F9", "x":13.75, "y":0}, {"label":"F10", "x":14.75, "y":0}, {"label":"F11", "x":15.75, "y":0}, {"label":"F12", "x":16.75, "y":0}, {"label":"PrtSc", "x":18, "y":0}, {"label":"Scroll Lock", "x":19, "y":0}, {"label":"Pause", "x":20, "y":0}, {"label":"~", "x":0, "y":1.5}, {"label":"!", "x":1, "y":1.5}, {"label":"@", "x":2, "y":1.5}, {"label":"#", "x":3, "y":1.5}, {"label":"$", "x":4, "y":1.5}, {"label":"%", "x":5, "y":1.5}, {"label":"^", "x":6, "y":1.5}, {"label":"&", "x":9.75, "y":1.5}, {"label":"*", "x":10.75, "y":1.5}, {"label":"(", "x":11.75, "y":1.5}, {"label":")", "x":12.75, "y":1.5}, {"label":"_", "x":13.75, "y":1.5}, {"label":"+", "x":14.75, "y":1.5}, {"label":"Backspace", "x":15.75, "y":1.5, "w":2}, {"label":"Insert", "x":18, "y":1.5}, {"label":"Home", "x":19, "y":1.5}, {"label":"PgUp", "x":20, "y":1.5}, {"label":"Tab", "x":0, "y":2.5, "w":1.5}, {"label":"Q", "x":1.5, "y":2.5}, {"label":"W", "x":2.5, "y":2.5}, {"label":"E", "x":3.5, "y":2.5}, {"label":"R", "x":4.5, "y":2.5}, {"label":"T", "x":5.5, "y":2.5}, {"label":"Y", "x":9.25, "y":2.5}, {"label":"U", "x":10.25, "y":2.5}, {"label":"I", "x":11.25, "y":2.5}, {"label":"O", "x":12.25, "y":2.5}, {"label":"P", "x":13.25, "y":2.5}, {"label":"{", "x":14.25, "y":2.5}, {"label":"}", "x":15.25, "y":2.5}, {"label":"|", "x":16.25, "y":2.5, "w":1.5}, {"label":"Delete", "x":18, "y":2.5}, {"label":"End", "x":19, "y":2.5}, {"label":"PgDn", "x":20, "y":2.5}, {"label":"Caps Lock", "x":0, "y":3.5, "w":1.75}, {"label":"A", "x":1.75, "y":3.5}, {"label":"S", "x":2.75, "y":3.5}, {"label":"D", "x":3.75, "y":3.5}, {"label":"F", "x":4.75, "y":3.5}, {"label":"G", "x":5.75, "y":3.5}, {"label":"H", "x":9.5, "y":3.5}, {"label":"J", "x":10.5, "y":3.5}, {"label":"K", "x":11.5, "y":3.5}, {"label":"L", "x":12.5, "y":3.5}, {"label":":", "x":13.5, "y":3.5}, {"label":"\"", "x":14.5, "y":3.5}, {"label":"Enter", "x":15.5, "y":3.5, "w":2.25}, {"label":"Shift", "x":0, "y":4.5, "w":2.25}, {"label":"Z", "x":2.25, "y":4.5}, {"label":"X", "x":3.25, "y":4.5}, {"label":"C", "x":4.25, "y":4.5}, {"label":"V", "x":5.25, "y":4.5}, {"label":"B", "x":6.25, "y":4.5}, {"label":"N", "x":10, "y":4.5}, {"label":"M", "x":11, "y":4.5}, {"label":"<", "x":12, "y":4.5}, {"label":">", "x":13, "y":4.5}, {"label":"?", "x":14, "y":4.5}, {"label":"Shift", "x":15, "y":4.5, "w":2.75}, {"label":"\u2191", "x":19, "y":4.5}, {"label":"Ctrl", "x":0, "y":5.5, "w":1.25}, {"label":"Fn", "x":1.25, "y":5.5, "w":1.25}, {"label":"Win", "x":2.5, "y":5.5, "w":1.25}, {"label":"Alt", "x":3.75, "y":5.5, "w":1.25}, {"x":5, "y":5.5, "w":2.25}, {"x":10, "y":5.5, "w":2.75}, {"label":"Alt", "x":12.75, "y":5.5, "w":1.25}, {"label":"Win", "x":14, "y":5.5, "w":1.25}, {"label":"Menu", "x":15.25, "y":5.5, "w":1.25}, {"label":"Ctrl", "x":16.5, "y":5.5, "w":1.25}, {"label":"\u2190", "x":18, "y":5.5}, {"label":"\u2193", "x":19, "y":5.5}, {"label":"\u2192", "x":20, "y":5.5}] } } } diff --git a/keyboards/handwired/split89/keymaps/default/keymap.c b/keyboards/handwired/split89/keymaps/default/keymap.c index bc5540b375..5b2ed1740d 100644 --- a/keyboards/handwired/split89/keymaps/default/keymap.c +++ b/keyboards/handwired/split89/keymaps/default/keymap.c @@ -23,20 +23,20 @@ enum layer_names { const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { /* Base */ [0] = LAYOUT( - KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, - KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, - KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, - KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, - KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, - KC_LCTL, MO(1), KC_LGUI, KC_LALT, KC_SPC, KC_SPC, KC_RALT, KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT - ), + KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, + KC_GRV,KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, + KC_TAB,KC_Q, KC_W, KC_E, KC_R, KC_T, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, + KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_Y, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_H, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSHIFT, KC_UP, + KC_LCTL,MO(1),KC_LGUI,KC_LALT,KC_SPACE, KC_N, KC_SPACE, KC_RALT,KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT + ), /* Volume */ [1] = LAYOUT( - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_VOLU, - KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPLY, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT - ), + KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, + KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_VOLU, + KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_MEDIA_PLAY_PAUSE, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_MPRV, KC_VOLD, KC_MNXT + ), }; diff --git a/keyboards/handwired/split89/split89.h b/keyboards/handwired/split89/split89.h index 693476cea3..7e94027078 100644 --- a/keyboards/handwired/split89/split89.h +++ b/keyboards/handwired/split89/split89.h @@ -18,8 +18,6 @@ #include "quantum.h" -#define XXX KC_NO - /* This is a shortcut to help you visually see your layout. * * The first section contains all of the arguments representing the physical @@ -29,24 +27,24 @@ * represents the switch matrix which includes blanks in the wired out matrix. */ #define LAYOUT( \ - K04, K05, K06, K07, K08, K09, K60, K61, K62, K63, K64, K65, K66, K67, K68, K69, \ - K24, K14, K15, K16, K17, K18, K19, K70, K71, K72, K73, K74, K75, K76, K77, K78, K79, \ - K34, K25, K26, K27, K28, K29, K39, K90, K80, K81, K82, K83, K84, K85, K86, K87, K88, \ - K89, K44, K35, K36, K37, K38, K49, KA0, K91, K92, K93, K94, K95, \ - K96, K54, K45, K46, K47, K48, K59, KB0, KA1, KA2, KA3, KA4, KA6, \ - KA8, K55, K56, K57, K58, KB1, KB3, KB4, KB5, KB6, KB7, KB8, KB9 \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, k14, k15, \ + k32, k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k30, k31, \ + k48, k33, k34, k35, k36, k37, k54, k38, k39, k40, k41, k42, k43, k44, k45, k46, k47, \ + k61, k49, k50, k51, k52, k53, k67, k55, k56, k57, k58, k59, k60, \ + k74, k62, k63, k64, k65, k66, k80, k68, k69, k70, k71, k72, k73, \ + k75, k76, k77, k78, k79, k81, k82, k83, k84, k85, k86, k87, k88 \ ) \ { \ - { XXX, XXX, XXX, XXX, K04, K05, K06, K07, K08, K09 }, \ - { XXX, XXX, XXX, XXX, K14, K15, K16, K17, K18, K19 }, \ - { XXX, XXX, XXX, XXX, K24, K25, K26, K27, K28, K29 }, \ - { XXX, XXX, XXX, XXX, K34, K35, K36, K37, K38, K39 }, \ - { XXX, XXX, XXX, XXX, K44, K45, K46, K47, K48, K49 }, \ - { XXX, XXX, XXX, XXX, K54, K55, K56, K57, K58, K59 }, \ - { K60, K61, K62, K63, K64, K65, K66, K67, K68, K69 }, \ - { K70, K71, K72, K73, K74, K75, K76, K77, K78, K79 }, \ - { K80, K81, K82, K83, K84, K85, K86, K87, K88, K89 }, \ - { K90, K91, K92, K93, K94, K95, K96, XXX, XXX, XXX }, \ - { KA0, KA1, KA2, KA3, KA4, XXX, KA6, XXX, KA8, XXX }, \ - { KB0, KB1, XXX, KB3, KB4, KB5, KB6, KB7, KB8, KB9 } \ + { KC_NO, KC_NO, KC_NO, KC_NO, k00, k01, k02, k03, k04, k05 }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, k16, k17, k18, k19, k20, k21 }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, k32, k33, k34, k35, k36, k37 }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, k48, k49, k50, k51, k52, k53 }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, k61, k62, k63, k64, k65, k66, }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, k74, k75, k76, k77, k78, k79, }, \ + { k06, k07, k08, k09, k10, k11, k12, k13, k14, k15 }, \ + { k22, k23, k24, k25, k26, k27, k28, k29, k30, k31 }, \ + { k38, k39, k40, k41, k42, k43, k44, k45, k46, k47 }, \ + { k54, k55, k56, k57, k58, k59, k60, KC_NO, KC_NO, KC_NO }, \ + { k67, k68, k69, k70, k71, KC_NO, k72, KC_NO, k73, KC_NO }, \ + { k80, k81, KC_NO, k82, k83, k84, k85, k86, k87, k88 } \ } From 282e916d86a5d353b7cbdfef3afad3c7b011eb14 Mon Sep 17 00:00:00 2001 From: Joel Challis <git@zvecr.com> Date: Wed, 24 Nov 2021 07:38:49 +0000 Subject: [PATCH 576/595] Remove use of __flash due to LTO issues (#15268) --- docs/feature_led_matrix.md | 2 +- docs/feature_rgb_matrix.md | 8 ++++---- docs/ja/feature_led_matrix.md | 2 +- drivers/led/aw20216.c | 3 ++- drivers/led/aw20216.h | 2 +- drivers/led/ckled2001.c | 6 ++++-- drivers/led/ckled2001.h | 2 +- drivers/led/issi/is31fl3731-simple.c | 6 ++++-- drivers/led/issi/is31fl3731-simple.h | 2 +- drivers/led/issi/is31fl3731.c | 6 ++++-- drivers/led/issi/is31fl3731.h | 2 +- drivers/led/issi/is31fl3733.c | 6 ++++-- drivers/led/issi/is31fl3733.h | 2 +- drivers/led/issi/is31fl3736.c | 6 ++++-- drivers/led/issi/is31fl3736.h | 2 +- drivers/led/issi/is31fl3737.c | 6 ++++-- drivers/led/issi/is31fl3737.h | 2 +- drivers/led/issi/is31fl3741.c | 6 ++++-- drivers/led/issi/is31fl3741.h | 2 +- keyboards/canary/canary60rgb/canary60rgb.c | 2 +- keyboards/clueboard/66_hotswap/gen1/gen1.c | 2 +- keyboards/dp60/dp60.c | 2 +- keyboards/durgod/dgk6x/galaxy/galaxy.c | 2 +- keyboards/durgod/dgk6x/hades/hades.c | 2 +- keyboards/durgod/dgk6x/venus/venus.c | 2 +- keyboards/dztech/dz60rgb/dz60rgb.c | 2 +- keyboards/dztech/dz60rgb_ansi/dz60rgb_ansi.c | 2 +- keyboards/dztech/dz60rgb_wkl/dz60rgb_wkl.c | 2 +- keyboards/dztech/dz65rgb/v1/v1.c | 2 +- keyboards/dztech/dz65rgb/v2/v2.c | 2 +- keyboards/dztech/dz65rgb/v3/v3.c | 2 +- keyboards/ergodox_ez/ergodox_ez.c | 2 +- keyboards/ergodox_infinity/ergodox_infinity.c | 2 +- keyboards/evyd13/atom47/rev5/rev5.c | 2 +- keyboards/exclusive/e6_rgb/e6_rgb.c | 2 +- keyboards/fallacy/indicators.c | 2 +- keyboards/geekboards/tester/tester.c | 2 +- keyboards/gmmk/pro/ansi/keymaps/mattgauf/ansi.c | 2 +- keyboards/hs60/v1/v1.c | 4 ++-- keyboards/inett_studio/sqx/hotswap/hotswap.c | 2 +- keyboards/inett_studio/sqx/universal/universal.c | 2 +- keyboards/k_type/is31fl3733-dual.h | 2 +- keyboards/k_type/k_type.c | 2 +- keyboards/kbdfans/bella/rgb/rgb.c | 2 +- keyboards/kbdfans/bella/rgb_iso/rgb_iso.c | 2 +- keyboards/kbdfans/boop65/rgb/rgb.c | 2 +- keyboards/kbdfans/kbd67/mkiirgb/v1/v1.c | 2 +- keyboards/kbdfans/kbd67/mkiirgb/v2/v2.c | 2 +- keyboards/kbdfans/kbd67/mkiirgb/v3/v3.c | 2 +- keyboards/kbdfans/kbdmini/kbdmini.c | 2 +- keyboards/kbdfans/maja/maja.c | 2 +- keyboards/keychron/q1/rev_0100/rev_0100.c | 2 +- keyboards/keychron/q1/rev_0102/rev_0102.c | 2 +- keyboards/latin17rgb/latin17rgb.c | 2 +- keyboards/latin60rgb/latin60rgb.c | 2 +- keyboards/latin6rgb/latin6rgb.c | 2 +- keyboards/matrix/m20add/rgb_ring.c | 2 +- keyboards/matrix/noah/noah.c | 2 +- keyboards/mechlovin/adelais/rgb_led/rev2/rev2.c | 2 +- keyboards/mechlovin/adelais/rgb_led/rev3/rev3.c | 2 +- keyboards/mechlovin/delphine/rgb_led/rgb_led.c | 2 +- keyboards/mechlovin/hannah60rgb/rev2/rev2.c | 2 +- .../mechlovin/infinity87/rgb_rev1/rgb_rev1.c | 2 +- keyboards/melgeek/mach80/rev1/rev1.c | 2 +- keyboards/melgeek/mj61/rev1/rev1.c | 2 +- keyboards/melgeek/mj61/rev2/rev2.c | 2 +- keyboards/melgeek/mj63/rev1/rev1.c | 2 +- keyboards/melgeek/mj63/rev2/rev2.c | 2 +- keyboards/melgeek/mj64/rev1/rev1.c | 2 +- keyboards/melgeek/mj64/rev2/rev2.c | 2 +- keyboards/melgeek/mj64/rev3/rev3.c | 2 +- keyboards/melgeek/mj65/rev3/rev3.c | 2 +- keyboards/melgeek/mojo68/rev1/rev1.c | 2 +- keyboards/melgeek/mojo75/rev1/rev1.c | 2 +- keyboards/melgeek/z70ultra/z70ultra.c | 2 +- keyboards/miller/gm862/gm862.c | 2 +- keyboards/moonlander/moonlander.c | 2 +- keyboards/mt64rgb/mt64rgb.c | 2 +- keyboards/mt84/mt84.c | 2 +- keyboards/neson_design/n6/n6.c | 2 +- keyboards/opendeck/32/rev1/rev1.c | 2 +- keyboards/planck/ez/ez.c | 2 +- keyboards/planck/light/light.c | 2 +- keyboards/playkbtw/pk64rgb/pk64rgb.c | 2 +- keyboards/smallkeyboard/smallkeyboard.c | 2 +- keyboards/terrazzo/terrazzo.c | 2 +- keyboards/tkc/portico/portico.c | 2 +- keyboards/whitefox/whitefox.c | 2 +- keyboards/wilba_tech/wt_rgb_backlight.c | 16 ++++++++-------- keyboards/xbows/knight/knight.c | 2 +- keyboards/xbows/knight_plus/knight_plus.c | 2 +- keyboards/xbows/nature/nature.c | 2 +- keyboards/xbows/numpad/numpad.c | 2 +- keyboards/xbows/ranger/ranger.c | 2 +- keyboards/xbows/woody/woody.c | 2 +- keyboards/xelus/dawn60/rev1_qmk/rev1_qmk.c | 2 +- keyboards/xelus/pachi/rgb/rev1/rev1.c | 2 +- keyboards/xelus/pachi/rgb/rev2/rev2.c | 2 +- platforms/progmem.h | 1 - 99 files changed, 131 insertions(+), 117 deletions(-) diff --git a/docs/feature_led_matrix.md b/docs/feature_led_matrix.md index d96199a3c7..dfd63503f2 100644 --- a/docs/feature_led_matrix.md +++ b/docs/feature_led_matrix.md @@ -54,7 +54,7 @@ For split keyboards using `LED_MATRIX_SPLIT` with an LED driver, you can either Define these arrays listing all the LEDs in your `<keyboard>.c`: ```c -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | LED address diff --git a/docs/feature_rgb_matrix.md b/docs/feature_rgb_matrix.md index d3d740c1b9..d07c02e184 100644 --- a/docs/feature_rgb_matrix.md +++ b/docs/feature_rgb_matrix.md @@ -55,7 +55,7 @@ For split keyboards using `RGB_MATRIX_SPLIT` with an LED driver, you can either Define these arrays listing all the LEDs in your `<keyboard>.c`: ```c -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | R location @@ -140,7 +140,7 @@ Currently only 4 drivers are supported, but it would be trivial to support all 8 Define these arrays listing all the LEDs in your `<keyboard>.c`: ```c -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | R location @@ -218,7 +218,7 @@ Currently only 2 drivers are supported, but it would be trivial to support all 4 Define these arrays listing all the LEDs in your `<keyboard>.c`: ```c -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | R location @@ -319,7 +319,7 @@ Here is an example using 2 drivers. Define these arrays listing all the LEDs in your `<keyboard>.c`: ```c -const aw_led __flash g_aw_leds[DRIVER_LED_TOTAL] = { +const aw_led PROGMEM g_aw_leds[DRIVER_LED_TOTAL] = { /* Each AW20216 channel is controlled by a register at some offset between 0x00 * and 0xD7 inclusive. * See drivers/awinic/aw20216.h for the mapping between register offsets and diff --git a/docs/ja/feature_led_matrix.md b/docs/ja/feature_led_matrix.md index 6511b28249..2b1979ec68 100644 --- a/docs/ja/feature_led_matrix.md +++ b/docs/ja/feature_led_matrix.md @@ -52,7 +52,7 @@ I2C IS31FL3731 RGB コントローラを使ったアドレス指定可能な LED `<keyboard>.c` に全ての LED を列挙する配列を定義します: - const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { + const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* これらの位置については IS31 マニュアルを参照してください * driver * | LED address diff --git a/drivers/led/aw20216.c b/drivers/led/aw20216.c index c608c0ab44..2c7ff8f088 100644 --- a/drivers/led/aw20216.c +++ b/drivers/led/aw20216.c @@ -119,7 +119,8 @@ void AW20216_init(pin_t cs_pin, pin_t en_pin) { } void AW20216_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) { - aw_led led = g_aw_leds[index]; + aw_led led; + memcpy_P(&led, (&g_aw_leds[index]), sizeof(led)); g_pwm_buffer[led.driver][led.r] = red; g_pwm_buffer[led.driver][led.g] = green; diff --git a/drivers/led/aw20216.h b/drivers/led/aw20216.h index 97ac6dc5bf..0a17050fed 100644 --- a/drivers/led/aw20216.h +++ b/drivers/led/aw20216.h @@ -28,7 +28,7 @@ typedef struct aw_led { uint8_t b; } aw_led; -extern const aw_led __flash g_aw_leds[DRIVER_LED_TOTAL]; +extern const aw_led PROGMEM g_aw_leds[DRIVER_LED_TOTAL]; void AW20216_init(pin_t cs_pin, pin_t en_pin); void AW20216_set_color(int index, uint8_t red, uint8_t green, uint8_t blue); diff --git a/drivers/led/ckled2001.c b/drivers/led/ckled2001.c index 6307303437..990e50cb60 100644 --- a/drivers/led/ckled2001.c +++ b/drivers/led/ckled2001.c @@ -141,8 +141,9 @@ void CKLED2001_init(uint8_t addr) { } void CKLED2001_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) { + ckled2001_led led; if (index >= 0 && index < DRIVER_LED_TOTAL) { - ckled2001_led led = g_ckled2001_leds[index]; + memcpy_P(&led, (&g_ckled2001_leds[index]), sizeof(led)); g_pwm_buffer[led.driver][led.r] = red; g_pwm_buffer[led.driver][led.g] = green; @@ -158,7 +159,8 @@ void CKLED2001_set_color_all(uint8_t red, uint8_t green, uint8_t blue) { } void CKLED2001_set_led_control_register(uint8_t index, bool red, bool green, bool blue) { - ckled2001_led led = g_ckled2001_leds[index]; + ckled2001_led led; + memcpy_P(&led, (&g_ckled2001_leds[index]), sizeof(led)); uint8_t control_register_r = led.r / 8; uint8_t control_register_g = led.g / 8; diff --git a/drivers/led/ckled2001.h b/drivers/led/ckled2001.h index efe399690a..1967961d20 100644 --- a/drivers/led/ckled2001.h +++ b/drivers/led/ckled2001.h @@ -27,7 +27,7 @@ typedef struct ckled2001_led { uint8_t b; } __attribute__((packed)) ckled2001_led; -extern const ckled2001_led __flash g_ckled2001_leds[DRIVER_LED_TOTAL]; +extern const ckled2001_led PROGMEM g_ckled2001_leds[DRIVER_LED_TOTAL]; void CKLED2001_init(uint8_t addr); bool CKLED2001_write_register(uint8_t addr, uint8_t reg, uint8_t data); diff --git a/drivers/led/issi/is31fl3731-simple.c b/drivers/led/issi/is31fl3731-simple.c index 9d28ea91d0..f51e2e38af 100644 --- a/drivers/led/issi/is31fl3731-simple.c +++ b/drivers/led/issi/is31fl3731-simple.c @@ -193,8 +193,9 @@ void IS31FL3731_init(uint8_t addr) { } void IS31FL3731_set_value(int index, uint8_t value) { + is31_led led; if (index >= 0 && index < DRIVER_LED_TOTAL) { - is31_led led = g_is31_leds[index]; + memcpy_P(&led, (&g_is31_leds[index]), sizeof(led)); // Subtract 0x24 to get the second index of g_pwm_buffer g_pwm_buffer[led.driver][led.v - 0x24] = value; @@ -209,7 +210,8 @@ void IS31FL3731_set_value_all(uint8_t value) { } void IS31FL3731_set_led_control_register(uint8_t index, bool value) { - is31_led led = g_is31_leds[index]; + is31_led led; + memcpy_P(&led, (&g_is31_leds[index]), sizeof(led)); uint8_t control_register = (led.v - 0x24) / 8; uint8_t bit_value = (led.v - 0x24) % 8; diff --git a/drivers/led/issi/is31fl3731-simple.h b/drivers/led/issi/is31fl3731-simple.h index ecde31eed5..ded94b0470 100644 --- a/drivers/led/issi/is31fl3731-simple.h +++ b/drivers/led/issi/is31fl3731-simple.h @@ -27,7 +27,7 @@ typedef struct is31_led { uint8_t v; } __attribute__((packed)) is31_led; -extern const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL]; +extern const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL]; void IS31FL3731_init(uint8_t addr); void IS31FL3731_write_register(uint8_t addr, uint8_t reg, uint8_t data); diff --git a/drivers/led/issi/is31fl3731.c b/drivers/led/issi/is31fl3731.c index fbf24c30fb..e6190a6b90 100644 --- a/drivers/led/issi/is31fl3731.c +++ b/drivers/led/issi/is31fl3731.c @@ -181,8 +181,9 @@ void IS31FL3731_init(uint8_t addr) { } void IS31FL3731_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) { + is31_led led; if (index >= 0 && index < DRIVER_LED_TOTAL) { - is31_led led = g_is31_leds[index]; + memcpy_P(&led, (&g_is31_leds[index]), sizeof(led)); // Subtract 0x24 to get the second index of g_pwm_buffer g_pwm_buffer[led.driver][led.r - 0x24] = red; @@ -199,7 +200,8 @@ void IS31FL3731_set_color_all(uint8_t red, uint8_t green, uint8_t blue) { } void IS31FL3731_set_led_control_register(uint8_t index, bool red, bool green, bool blue) { - is31_led led = g_is31_leds[index]; + is31_led led; + memcpy_P(&led, (&g_is31_leds[index]), sizeof(led)); uint8_t control_register_r = (led.r - 0x24) / 8; uint8_t control_register_g = (led.g - 0x24) / 8; diff --git a/drivers/led/issi/is31fl3731.h b/drivers/led/issi/is31fl3731.h index 803ea3ea12..6647119eba 100644 --- a/drivers/led/issi/is31fl3731.h +++ b/drivers/led/issi/is31fl3731.h @@ -28,7 +28,7 @@ typedef struct is31_led { uint8_t b; } __attribute__((packed)) is31_led; -extern const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL]; +extern const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL]; void IS31FL3731_init(uint8_t addr); void IS31FL3731_write_register(uint8_t addr, uint8_t reg, uint8_t data); diff --git a/drivers/led/issi/is31fl3733.c b/drivers/led/issi/is31fl3733.c index 371010fd81..696491d070 100644 --- a/drivers/led/issi/is31fl3733.c +++ b/drivers/led/issi/is31fl3733.c @@ -181,8 +181,9 @@ void IS31FL3733_init(uint8_t addr, uint8_t sync) { } void IS31FL3733_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) { + is31_led led; if (index >= 0 && index < DRIVER_LED_TOTAL) { - is31_led led = g_is31_leds[index]; + memcpy_P(&led, (&g_is31_leds[index]), sizeof(led)); g_pwm_buffer[led.driver][led.r] = red; g_pwm_buffer[led.driver][led.g] = green; @@ -198,7 +199,8 @@ void IS31FL3733_set_color_all(uint8_t red, uint8_t green, uint8_t blue) { } void IS31FL3733_set_led_control_register(uint8_t index, bool red, bool green, bool blue) { - is31_led led = g_is31_leds[index]; + is31_led led; + memcpy_P(&led, (&g_is31_leds[index]), sizeof(led)); uint8_t control_register_r = led.r / 8; uint8_t control_register_g = led.g / 8; diff --git a/drivers/led/issi/is31fl3733.h b/drivers/led/issi/is31fl3733.h index daa226b41a..c5d62fed85 100644 --- a/drivers/led/issi/is31fl3733.h +++ b/drivers/led/issi/is31fl3733.h @@ -30,7 +30,7 @@ typedef struct is31_led { uint8_t b; } __attribute__((packed)) is31_led; -extern const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL]; +extern const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL]; void IS31FL3733_init(uint8_t addr, uint8_t sync); bool IS31FL3733_write_register(uint8_t addr, uint8_t reg, uint8_t data); diff --git a/drivers/led/issi/is31fl3736.c b/drivers/led/issi/is31fl3736.c index dcaabba2ef..c9a871118d 100644 --- a/drivers/led/issi/is31fl3736.c +++ b/drivers/led/issi/is31fl3736.c @@ -163,8 +163,9 @@ void IS31FL3736_init(uint8_t addr) { } void IS31FL3736_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) { + is31_led led; if (index >= 0 && index < DRIVER_LED_TOTAL) { - is31_led led = g_is31_leds[index]; + memcpy_P(&led, (&g_is31_leds[index]), sizeof(led)); g_pwm_buffer[led.driver][led.r] = red; g_pwm_buffer[led.driver][led.g] = green; @@ -180,7 +181,8 @@ void IS31FL3736_set_color_all(uint8_t red, uint8_t green, uint8_t blue) { } void IS31FL3736_set_led_control_register(uint8_t index, bool red, bool green, bool blue) { - is31_led led = g_is31_leds[index]; + is31_led led; + memcpy_P(&led, (&g_is31_leds[index]), sizeof(led)); // IS31FL3733 // The PWM register for a matrix position (0x00 to 0xBF) can be diff --git a/drivers/led/issi/is31fl3736.h b/drivers/led/issi/is31fl3736.h index a30be90556..9fbe1cc577 100644 --- a/drivers/led/issi/is31fl3736.h +++ b/drivers/led/issi/is31fl3736.h @@ -39,7 +39,7 @@ typedef struct is31_led { uint8_t b; } __attribute__((packed)) is31_led; -extern const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL]; +extern const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL]; void IS31FL3736_init(uint8_t addr); void IS31FL3736_write_register(uint8_t addr, uint8_t reg, uint8_t data); diff --git a/drivers/led/issi/is31fl3737.c b/drivers/led/issi/is31fl3737.c index 62862e0d41..0722e18869 100644 --- a/drivers/led/issi/is31fl3737.c +++ b/drivers/led/issi/is31fl3737.c @@ -166,8 +166,9 @@ void IS31FL3737_init(uint8_t addr) { } void IS31FL3737_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) { + is31_led led; if (index >= 0 && index < DRIVER_LED_TOTAL) { - is31_led led = g_is31_leds[index]; + memcpy_P(&led, (&g_is31_leds[index]), sizeof(led)); g_pwm_buffer[led.driver][led.r] = red; g_pwm_buffer[led.driver][led.g] = green; @@ -183,7 +184,8 @@ void IS31FL3737_set_color_all(uint8_t red, uint8_t green, uint8_t blue) { } void IS31FL3737_set_led_control_register(uint8_t index, bool red, bool green, bool blue) { - is31_led led = g_is31_leds[index]; + is31_led led; + memcpy_P(&led, (&g_is31_leds[index]), sizeof(led)); uint8_t control_register_r = led.r / 8; uint8_t control_register_g = led.g / 8; diff --git a/drivers/led/issi/is31fl3737.h b/drivers/led/issi/is31fl3737.h index 97917f1d4f..31b1a22267 100644 --- a/drivers/led/issi/is31fl3737.h +++ b/drivers/led/issi/is31fl3737.h @@ -30,7 +30,7 @@ typedef struct is31_led { uint8_t b; } __attribute__((packed)) is31_led; -extern const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL]; +extern const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL]; void IS31FL3737_init(uint8_t addr); void IS31FL3737_write_register(uint8_t addr, uint8_t reg, uint8_t data); diff --git a/drivers/led/issi/is31fl3741.c b/drivers/led/issi/is31fl3741.c index 5084f3b9fc..8d347a5e60 100644 --- a/drivers/led/issi/is31fl3741.c +++ b/drivers/led/issi/is31fl3741.c @@ -174,8 +174,9 @@ void IS31FL3741_init(uint8_t addr) { } void IS31FL3741_set_color(int index, uint8_t red, uint8_t green, uint8_t blue) { + is31_led led; if (index >= 0 && index < DRIVER_LED_TOTAL) { - is31_led led = g_is31_leds[index]; + memcpy_P(&led, (&g_is31_leds[index]), sizeof(led)); g_pwm_buffer[led.driver][led.r] = red; g_pwm_buffer[led.driver][led.g] = green; @@ -191,7 +192,8 @@ void IS31FL3741_set_color_all(uint8_t red, uint8_t green, uint8_t blue) { } void IS31FL3741_set_led_control_register(uint8_t index, bool red, bool green, bool blue) { - is31_led led = g_is31_leds[index]; + is31_led led; + memcpy_P(&led, (&g_is31_leds[index]), sizeof(led)); if (red) { g_scaling_registers[led.driver][led.r] = 0xFF; diff --git a/drivers/led/issi/is31fl3741.h b/drivers/led/issi/is31fl3741.h index 563022b9b0..8154f8be70 100644 --- a/drivers/led/issi/is31fl3741.h +++ b/drivers/led/issi/is31fl3741.h @@ -30,7 +30,7 @@ typedef struct is31_led { uint32_t b : 10; } __attribute__((packed)) is31_led; -extern const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL]; +extern const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL]; void IS31FL3741_init(uint8_t addr); void IS31FL3741_write_register(uint8_t addr, uint8_t reg, uint8_t data); diff --git a/keyboards/canary/canary60rgb/canary60rgb.c b/keyboards/canary/canary60rgb/canary60rgb.c index b01af5f294..b37a88b32f 100644 --- a/keyboards/canary/canary60rgb/canary60rgb.c +++ b/keyboards/canary/canary60rgb/canary60rgb.c @@ -16,7 +16,7 @@ #include "canary60rgb.h" #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { { 0, J_14, K_14, L_14 }, { 0, J_13, K_13, L_13 }, { 0, J_12, K_12, L_12 }, diff --git a/keyboards/clueboard/66_hotswap/gen1/gen1.c b/keyboards/clueboard/66_hotswap/gen1/gen1.c index 8e3db70d07..66c40731ec 100644 --- a/keyboards/clueboard/66_hotswap/gen1/gen1.c +++ b/keyboards/clueboard/66_hotswap/gen1/gen1.c @@ -16,7 +16,7 @@ #include "gen1.h" #ifdef LED_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | LED address diff --git a/keyboards/dp60/dp60.c b/keyboards/dp60/dp60.c index 87543b2a1c..16aac75fa5 100644 --- a/keyboards/dp60/dp60.c +++ b/keyboards/dp60/dp60.c @@ -17,7 +17,7 @@ #include "dp60.h" #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | R location diff --git a/keyboards/durgod/dgk6x/galaxy/galaxy.c b/keyboards/durgod/dgk6x/galaxy/galaxy.c index 5f793ed85b..86aef1bced 100644 --- a/keyboards/durgod/dgk6x/galaxy/galaxy.c +++ b/keyboards/durgod/dgk6x/galaxy/galaxy.c @@ -18,7 +18,7 @@ #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | R location diff --git a/keyboards/durgod/dgk6x/hades/hades.c b/keyboards/durgod/dgk6x/hades/hades.c index 3e235683f1..2f2f9e650f 100644 --- a/keyboards/durgod/dgk6x/hades/hades.c +++ b/keyboards/durgod/dgk6x/hades/hades.c @@ -19,7 +19,7 @@ #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | R location diff --git a/keyboards/durgod/dgk6x/venus/venus.c b/keyboards/durgod/dgk6x/venus/venus.c index 3398acb19d..0b7fbd12f3 100644 --- a/keyboards/durgod/dgk6x/venus/venus.c +++ b/keyboards/durgod/dgk6x/venus/venus.c @@ -18,7 +18,7 @@ #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | R location diff --git a/keyboards/dztech/dz60rgb/dz60rgb.c b/keyboards/dztech/dz60rgb/dz60rgb.c index a7fc3dbc5c..81f4846c2c 100644 --- a/keyboards/dztech/dz60rgb/dz60rgb.c +++ b/keyboards/dztech/dz60rgb/dz60rgb.c @@ -1,7 +1,7 @@ #include "dz60rgb.h" #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { { 0, K_14, J_14, L_14 }, { 0, K_13, J_13, L_13 }, { 0, K_12, J_12, L_12 }, diff --git a/keyboards/dztech/dz60rgb_ansi/dz60rgb_ansi.c b/keyboards/dztech/dz60rgb_ansi/dz60rgb_ansi.c index ab24410912..0929ddbf47 100644 --- a/keyboards/dztech/dz60rgb_ansi/dz60rgb_ansi.c +++ b/keyboards/dztech/dz60rgb_ansi/dz60rgb_ansi.c @@ -1,7 +1,7 @@ #include "dz60rgb_ansi.h" #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { { 0, K_14, J_14, L_14 }, { 0, K_13, J_13, L_13 }, { 0, K_12, J_12, L_12 }, diff --git a/keyboards/dztech/dz60rgb_wkl/dz60rgb_wkl.c b/keyboards/dztech/dz60rgb_wkl/dz60rgb_wkl.c index 455624471d..83feb58456 100644 --- a/keyboards/dztech/dz60rgb_wkl/dz60rgb_wkl.c +++ b/keyboards/dztech/dz60rgb_wkl/dz60rgb_wkl.c @@ -1,7 +1,7 @@ #include "dz60rgb_wkl.h" #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { { 0, H_15, G_15, I_15 }, { 0, K_14, J_14, L_14 }, { 0, K_13, J_13, L_13 }, diff --git a/keyboards/dztech/dz65rgb/v1/v1.c b/keyboards/dztech/dz65rgb/v1/v1.c index aabe41c313..8caced800b 100644 --- a/keyboards/dztech/dz65rgb/v1/v1.c +++ b/keyboards/dztech/dz65rgb/v1/v1.c @@ -16,7 +16,7 @@ #include "v1.h" #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { { 0, C8_8, C7_8, C6_8 }, { 0, C9_8, C7_7, C6_7 }, { 0, C9_7, C8_7, C6_6 }, diff --git a/keyboards/dztech/dz65rgb/v2/v2.c b/keyboards/dztech/dz65rgb/v2/v2.c index dce167c73f..db8e968cc4 100644 --- a/keyboards/dztech/dz65rgb/v2/v2.c +++ b/keyboards/dztech/dz65rgb/v2/v2.c @@ -16,7 +16,7 @@ #include "v2.h" #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { { 0, C8_8, C7_8, C6_8 }, { 0, C9_8, C7_7, C6_7 }, { 0, C9_7, C8_7, C6_6 }, diff --git a/keyboards/dztech/dz65rgb/v3/v3.c b/keyboards/dztech/dz65rgb/v3/v3.c index c3719bfa51..18f87dc00b 100755 --- a/keyboards/dztech/dz65rgb/v3/v3.c +++ b/keyboards/dztech/dz65rgb/v3/v3.c @@ -18,7 +18,7 @@ #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { {0, CS21_SW1, CS20_SW1, CS19_SW1}, {0, CS21_SW2, CS20_SW2, CS19_SW2}, {0, CS21_SW3, CS20_SW3, CS19_SW3}, diff --git a/keyboards/ergodox_ez/ergodox_ez.c b/keyboards/ergodox_ez/ergodox_ez.c index 7af76cb624..49f690fa70 100644 --- a/keyboards/ergodox_ez/ergodox_ez.c +++ b/keyboards/ergodox_ez/ergodox_ez.c @@ -243,7 +243,7 @@ const keypos_t PROGMEM hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { #ifdef RGB_MATRIX_ENABLE // clang-format off -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* driver * | R location * | | G location diff --git a/keyboards/ergodox_infinity/ergodox_infinity.c b/keyboards/ergodox_infinity/ergodox_infinity.c index 88028d3638..e6ac2c4559 100644 --- a/keyboards/ergodox_infinity/ergodox_infinity.c +++ b/keyboards/ergodox_infinity/ergodox_infinity.c @@ -174,7 +174,7 @@ const keypos_t PROGMEM hand_swap_config[MATRIX_ROWS][MATRIX_COLS] = { #endif #ifdef LED_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { // The numbers in the comments are the led numbers DXX on the PCB /* Refer to IS31 manual for these locations * driver diff --git a/keyboards/evyd13/atom47/rev5/rev5.c b/keyboards/evyd13/atom47/rev5/rev5.c index ea0208706a..f972b78867 100644 --- a/keyboards/evyd13/atom47/rev5/rev5.c +++ b/keyboards/evyd13/atom47/rev5/rev5.c @@ -17,7 +17,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "rev5.h" -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | R location diff --git a/keyboards/exclusive/e6_rgb/e6_rgb.c b/keyboards/exclusive/e6_rgb/e6_rgb.c index e0d313f835..11d313e9a3 100644 --- a/keyboards/exclusive/e6_rgb/e6_rgb.c +++ b/keyboards/exclusive/e6_rgb/e6_rgb.c @@ -11,7 +11,7 @@ void matrix_init_kb(void) { matrix_init_user(); } -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | R location diff --git a/keyboards/fallacy/indicators.c b/keyboards/fallacy/indicators.c index dcf1b4de07..c577bc9a8a 100755 --- a/keyboards/fallacy/indicators.c +++ b/keyboards/fallacy/indicators.c @@ -54,7 +54,7 @@ void set_fallacy_led(int index, bool state) { /* define LED matrix */ -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { {0, C1_1}, {0, C2_1}, {0, C3_1}, diff --git a/keyboards/geekboards/tester/tester.c b/keyboards/geekboards/tester/tester.c index 532df7a531..70865c461f 100644 --- a/keyboards/geekboards/tester/tester.c +++ b/keyboards/geekboards/tester/tester.c @@ -1,5 +1,5 @@ #include "tester.h" -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | R location diff --git a/keyboards/gmmk/pro/ansi/keymaps/mattgauf/ansi.c b/keyboards/gmmk/pro/ansi/keymaps/mattgauf/ansi.c index b09af297b8..52c9dfdf99 100644 --- a/keyboards/gmmk/pro/ansi/keymaps/mattgauf/ansi.c +++ b/keyboards/gmmk/pro/ansi/keymaps/mattgauf/ansi.c @@ -18,7 +18,7 @@ #include "ansi.h" #ifdef RGB_MATRIX_ENABLE -led_config_t __flash g_led_config = {{ +led_config_t PROGMEM g_led_config = {{ { 4, NO_LED, NO_LED, 95, 65, 79, 5, 28 }, { 8, 2, 9, 0, 10, 75, 1, 7 }, { 14, 3, 15, NO_LED, 16, 86, 6, 13 }, diff --git a/keyboards/hs60/v1/v1.c b/keyboards/hs60/v1/v1.c index d2bb8011f1..f96eb7c320 100644 --- a/keyboards/hs60/v1/v1.c +++ b/keyboards/hs60/v1/v1.c @@ -91,7 +91,7 @@ void raw_hid_receive( uint8_t *data, uint8_t length ) #ifdef HS60_ANSI -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | R location @@ -199,7 +199,7 @@ led_config_t g_led_config = { { #else -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | R location diff --git a/keyboards/inett_studio/sqx/hotswap/hotswap.c b/keyboards/inett_studio/sqx/hotswap/hotswap.c index 5b3c8df822..c8e7d87846 100644 --- a/keyboards/inett_studio/sqx/hotswap/hotswap.c +++ b/keyboards/inett_studio/sqx/hotswap/hotswap.c @@ -20,7 +20,7 @@ #include "hotswap.h" #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | R location diff --git a/keyboards/inett_studio/sqx/universal/universal.c b/keyboards/inett_studio/sqx/universal/universal.c index dd431a7f45..06cfbd3654 100644 --- a/keyboards/inett_studio/sqx/universal/universal.c +++ b/keyboards/inett_studio/sqx/universal/universal.c @@ -20,7 +20,7 @@ #include "universal.h" #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | R location diff --git a/keyboards/k_type/is31fl3733-dual.h b/keyboards/k_type/is31fl3733-dual.h index aab170a3fd..ea45a70867 100644 --- a/keyboards/k_type/is31fl3733-dual.h +++ b/keyboards/k_type/is31fl3733-dual.h @@ -28,7 +28,7 @@ typedef struct is31_led { uint8_t b; } __attribute__((packed)) is31_led; -extern const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL]; +extern const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL]; void IS31FL3733_init(uint8_t bus, uint8_t addr, uint8_t sync); bool IS31FL3733_write_register(uint8_t index, uint8_t addr, uint8_t reg, uint8_t data); diff --git a/keyboards/k_type/k_type.c b/keyboards/k_type/k_type.c index 924862277f..29e7fa57b2 100644 --- a/keyboards/k_type/k_type.c +++ b/keyboards/k_type/k_type.c @@ -23,7 +23,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "is31fl3733-dual.h" -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { { 0, B_1, A_1, C_1 }, { 0, B_2, A_2, C_2 }, { 0, B_3, A_3, C_3 }, diff --git a/keyboards/kbdfans/bella/rgb/rgb.c b/keyboards/kbdfans/bella/rgb/rgb.c index 17cf992146..4353cae1be 100644 --- a/keyboards/kbdfans/bella/rgb/rgb.c +++ b/keyboards/kbdfans/bella/rgb/rgb.c @@ -15,7 +15,7 @@ */ #include "rgb.h" #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { {0, CS18_SW1, CS17_SW1, CS16_SW1}, /* RGB6 */ {0, CS18_SW3, CS17_SW3, CS16_SW3}, /* RGB32 */ {0, CS18_SW4, CS17_SW4, CS16_SW4}, /* RGB45 */ diff --git a/keyboards/kbdfans/bella/rgb_iso/rgb_iso.c b/keyboards/kbdfans/bella/rgb_iso/rgb_iso.c index 0c431b1543..072501045a 100644 --- a/keyboards/kbdfans/bella/rgb_iso/rgb_iso.c +++ b/keyboards/kbdfans/bella/rgb_iso/rgb_iso.c @@ -15,7 +15,7 @@ */ #include "rgb_iso.h" #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { {0, CS18_SW1, CS17_SW1, CS16_SW1}, /* RGB6 */ {0, CS18_SW3, CS17_SW3, CS16_SW3}, /* RGB32 */ {0, CS18_SW4, CS17_SW4, CS16_SW4}, /* RGB45 */ diff --git a/keyboards/kbdfans/boop65/rgb/rgb.c b/keyboards/kbdfans/boop65/rgb/rgb.c index 5682ee2894..3e9c66f457 100644 --- a/keyboards/kbdfans/boop65/rgb/rgb.c +++ b/keyboards/kbdfans/boop65/rgb/rgb.c @@ -18,7 +18,7 @@ #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { {0, CS21_SW1, CS20_SW1, CS19_SW1}, {0, CS21_SW2, CS20_SW2, CS19_SW2}, {0, CS21_SW3, CS20_SW3, CS19_SW3}, diff --git a/keyboards/kbdfans/kbd67/mkiirgb/v1/v1.c b/keyboards/kbdfans/kbd67/mkiirgb/v1/v1.c index 53b57dc73d..f003673871 100644 --- a/keyboards/kbdfans/kbd67/mkiirgb/v1/v1.c +++ b/keyboards/kbdfans/kbd67/mkiirgb/v1/v1.c @@ -16,7 +16,7 @@ #include "v1.h" #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { {0, C8_8, C7_8, C6_8}, // LA17 {0, C9_8, C7_7, C6_7}, // LA16 diff --git a/keyboards/kbdfans/kbd67/mkiirgb/v2/v2.c b/keyboards/kbdfans/kbd67/mkiirgb/v2/v2.c index 562b9c4543..37972c2500 100644 --- a/keyboards/kbdfans/kbd67/mkiirgb/v2/v2.c +++ b/keyboards/kbdfans/kbd67/mkiirgb/v2/v2.c @@ -16,7 +16,7 @@ #include "v2.h" #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { {0, C8_8, C7_8, C6_8}, // LA17 {0, C9_8, C7_7, C6_7}, // LA16 diff --git a/keyboards/kbdfans/kbd67/mkiirgb/v3/v3.c b/keyboards/kbdfans/kbd67/mkiirgb/v3/v3.c index 6e368a5c77..85806aff51 100755 --- a/keyboards/kbdfans/kbd67/mkiirgb/v3/v3.c +++ b/keyboards/kbdfans/kbd67/mkiirgb/v3/v3.c @@ -18,7 +18,7 @@ #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { {0, CS21_SW1, CS20_SW1, CS19_SW1}, {0, CS21_SW2, CS20_SW2, CS19_SW2}, {0, CS21_SW3, CS20_SW3, CS19_SW3}, diff --git a/keyboards/kbdfans/kbdmini/kbdmini.c b/keyboards/kbdfans/kbdmini/kbdmini.c index 799803c6fa..03c0096c70 100644 --- a/keyboards/kbdfans/kbdmini/kbdmini.c +++ b/keyboards/kbdfans/kbdmini/kbdmini.c @@ -1,6 +1,6 @@ #include "kbdmini.h" -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { { 0, B_9, A_9, C_9 }, //LA33 { 0, B_10, A_10, C_10 }, //LA37 { 0, B_11, A_11, C_11 }, //LA41 diff --git a/keyboards/kbdfans/maja/maja.c b/keyboards/kbdfans/maja/maja.c index 9619a84b48..d257212750 100755 --- a/keyboards/kbdfans/maja/maja.c +++ b/keyboards/kbdfans/maja/maja.c @@ -1,6 +1,6 @@ #include "maja.h" -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { {0, C2_1, C3_1, C4_1}, // LA0 {0, C1_1, C3_2, C4_2}, // LA1 {0, C1_2, C2_2, C4_3}, // LA2 diff --git a/keyboards/keychron/q1/rev_0100/rev_0100.c b/keyboards/keychron/q1/rev_0100/rev_0100.c index abc4f2716c..f424669527 100644 --- a/keyboards/keychron/q1/rev_0100/rev_0100.c +++ b/keyboards/keychron/q1/rev_0100/rev_0100.c @@ -17,7 +17,7 @@ #include "quantum.h" -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | R location diff --git a/keyboards/keychron/q1/rev_0102/rev_0102.c b/keyboards/keychron/q1/rev_0102/rev_0102.c index 722284aaaf..e8a2c85ae3 100644 --- a/keyboards/keychron/q1/rev_0102/rev_0102.c +++ b/keyboards/keychron/q1/rev_0102/rev_0102.c @@ -17,7 +17,7 @@ #include "quantum.h" -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | R location diff --git a/keyboards/latin17rgb/latin17rgb.c b/keyboards/latin17rgb/latin17rgb.c index f7bbe125c2..d4ab3ea675 100644 --- a/keyboards/latin17rgb/latin17rgb.c +++ b/keyboards/latin17rgb/latin17rgb.c @@ -17,7 +17,7 @@ #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | R location diff --git a/keyboards/latin60rgb/latin60rgb.c b/keyboards/latin60rgb/latin60rgb.c index fe5d2eea8f..b849f7ef9d 100644 --- a/keyboards/latin60rgb/latin60rgb.c +++ b/keyboards/latin60rgb/latin60rgb.c @@ -16,7 +16,7 @@ #include "latin60rgb.h" #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { { 0, K_13, J_13, L_13 }, { 0, K_12, J_12, L_12 }, { 0, K_11, J_11, L_11 }, diff --git a/keyboards/latin6rgb/latin6rgb.c b/keyboards/latin6rgb/latin6rgb.c index 9ea4721ecb..ddab9a1519 100644 --- a/keyboards/latin6rgb/latin6rgb.c +++ b/keyboards/latin6rgb/latin6rgb.c @@ -17,7 +17,7 @@ #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | R location diff --git a/keyboards/matrix/m20add/rgb_ring.c b/keyboards/matrix/m20add/rgb_ring.c index e759ee4e4f..7535cb5bd4 100644 --- a/keyboards/matrix/m20add/rgb_ring.c +++ b/keyboards/matrix/m20add/rgb_ring.c @@ -30,7 +30,7 @@ #endif // rgb ring leds setting -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | R location diff --git a/keyboards/matrix/noah/noah.c b/keyboards/matrix/noah/noah.c index 20d68f34e9..2143dee3be 100644 --- a/keyboards/matrix/noah/noah.c +++ b/keyboards/matrix/noah/noah.c @@ -58,7 +58,7 @@ void matrix_scan_kb(void) { } #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | R location diff --git a/keyboards/mechlovin/adelais/rgb_led/rev2/rev2.c b/keyboards/mechlovin/adelais/rgb_led/rev2/rev2.c index fe946169a7..dda36f3710 100644 --- a/keyboards/mechlovin/adelais/rgb_led/rev2/rev2.c +++ b/keyboards/mechlovin/adelais/rgb_led/rev2/rev2.c @@ -17,7 +17,7 @@ #include "adelais.h" #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { {0, C2_1, C3_1, C4_1}, //D102-A0-0 {0, C5_1, C6_1, C7_1}, //D108-A1-1 diff --git a/keyboards/mechlovin/adelais/rgb_led/rev3/rev3.c b/keyboards/mechlovin/adelais/rgb_led/rev3/rev3.c index 7631bc8505..b20f897720 100644 --- a/keyboards/mechlovin/adelais/rgb_led/rev3/rev3.c +++ b/keyboards/mechlovin/adelais/rgb_led/rev3/rev3.c @@ -17,7 +17,7 @@ #include "rev3.h" #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { {0, CS3_SW5, CS2_SW5, CS1_SW5}, /* D9-K31-00 */ {0, CS6_SW5, CS5_SW5, CS4_SW5}, /* D46-K00-01 */ {0, CS6_SW9, CS5_SW9, CS4_SW9}, /* D59-K01-02 */ diff --git a/keyboards/mechlovin/delphine/rgb_led/rgb_led.c b/keyboards/mechlovin/delphine/rgb_led/rgb_led.c index 29b6d1f783..413a9a06ea 100644 --- a/keyboards/mechlovin/delphine/rgb_led/rgb_led.c +++ b/keyboards/mechlovin/delphine/rgb_led/rgb_led.c @@ -18,7 +18,7 @@ #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { // left CA {0, C5_2, C6_2, C7_2}, //D2-0 {0, C1_1, C3_2, C4_2}, //D20-1 diff --git a/keyboards/mechlovin/hannah60rgb/rev2/rev2.c b/keyboards/mechlovin/hannah60rgb/rev2/rev2.c index 8b30538cc2..ac371e4185 100644 --- a/keyboards/mechlovin/hannah60rgb/rev2/rev2.c +++ b/keyboards/mechlovin/hannah60rgb/rev2/rev2.c @@ -17,7 +17,7 @@ #include "rev2.h" #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | R location diff --git a/keyboards/mechlovin/infinity87/rgb_rev1/rgb_rev1.c b/keyboards/mechlovin/infinity87/rgb_rev1/rgb_rev1.c index bd1fd8abf7..0ad5d41430 100644 --- a/keyboards/mechlovin/infinity87/rgb_rev1/rgb_rev1.c +++ b/keyboards/mechlovin/infinity87/rgb_rev1/rgb_rev1.c @@ -17,7 +17,7 @@ #include "rgb_rev1.h" #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { {0, CS34_SW1, CS35_SW1, CS36_SW1}, //D92-K00-0 {0, CS37_SW1, CS38_SW1, CS39_SW1}, //D94-K01-1 {0, CS31_SW1, CS32_SW1, CS33_SW1}, //D96-K02-2 diff --git a/keyboards/melgeek/mach80/rev1/rev1.c b/keyboards/melgeek/mach80/rev1/rev1.c index 5a79708570..4d11d3f711 100755 --- a/keyboards/melgeek/mach80/rev1/rev1.c +++ b/keyboards/melgeek/mach80/rev1/rev1.c @@ -19,7 +19,7 @@ #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { {0, CS9_SW1, CS8_SW1, CS7_SW1}, /* RGB1 */ {0, CS9_SW2, CS8_SW2, CS7_SW2}, /* RGB2 */ {0, CS9_SW3, CS8_SW3, CS7_SW3}, /* RGB3 */ diff --git a/keyboards/melgeek/mj61/rev1/rev1.c b/keyboards/melgeek/mj61/rev1/rev1.c index e51c57548f..9d8de36d88 100644 --- a/keyboards/melgeek/mj61/rev1/rev1.c +++ b/keyboards/melgeek/mj61/rev1/rev1.c @@ -17,7 +17,7 @@ #include "mj61.h" #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { {0, CS12_SW1, CS11_SW1, CS10_SW1}, /* RGB1 */ {0, CS12_SW2, CS11_SW2, CS10_SW2}, /* RGB2 */ {0, CS12_SW3, CS11_SW3, CS10_SW3}, /* RGB3 */ diff --git a/keyboards/melgeek/mj61/rev2/rev2.c b/keyboards/melgeek/mj61/rev2/rev2.c index 3f6b1bff77..b46cf08c4e 100644 --- a/keyboards/melgeek/mj61/rev2/rev2.c +++ b/keyboards/melgeek/mj61/rev2/rev2.c @@ -19,7 +19,7 @@ #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { {0, CS9_SW1, CS8_SW1, CS7_SW1}, /* RGB1 */ {0, CS9_SW2, CS8_SW2, CS7_SW2}, /* RGB3 */ {0, CS9_SW3, CS8_SW3, CS7_SW3}, /* RGB4 */ diff --git a/keyboards/melgeek/mj63/rev1/rev1.c b/keyboards/melgeek/mj63/rev1/rev1.c index a6ee8859b0..45abafd84d 100644 --- a/keyboards/melgeek/mj63/rev1/rev1.c +++ b/keyboards/melgeek/mj63/rev1/rev1.c @@ -19,7 +19,7 @@ #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { {0, CS9_SW1, CS8_SW1, CS7_SW1}, /* RGB1 */ {0, CS9_SW2, CS8_SW2, CS7_SW2}, /* RGB2 */ {0, CS9_SW3, CS8_SW3, CS7_SW3}, /* RGB3 */ diff --git a/keyboards/melgeek/mj63/rev2/rev2.c b/keyboards/melgeek/mj63/rev2/rev2.c index 8cacc689ae..b21c4f960c 100644 --- a/keyboards/melgeek/mj63/rev2/rev2.c +++ b/keyboards/melgeek/mj63/rev2/rev2.c @@ -19,7 +19,7 @@ #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { {0, CS9_SW1, CS8_SW1, CS7_SW1}, /* RGB1 */ {0, CS9_SW2, CS8_SW2, CS7_SW2}, /* RGB3 */ {0, CS9_SW3, CS8_SW3, CS7_SW3}, /* RGB4 */ diff --git a/keyboards/melgeek/mj64/rev1/rev1.c b/keyboards/melgeek/mj64/rev1/rev1.c index 446ba779d0..3279e7a1fe 100644 --- a/keyboards/melgeek/mj64/rev1/rev1.c +++ b/keyboards/melgeek/mj64/rev1/rev1.c @@ -18,7 +18,7 @@ #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { {0, CS9_SW1, CS8_SW1, CS7_SW1}, /* RGB1 */ {0, CS9_SW2, CS8_SW2, CS7_SW2}, /* RGB2 */ {0, CS9_SW3, CS8_SW3, CS7_SW3}, /* RGB3 */ diff --git a/keyboards/melgeek/mj64/rev2/rev2.c b/keyboards/melgeek/mj64/rev2/rev2.c index 444e8f60ac..b0653f9e71 100644 --- a/keyboards/melgeek/mj64/rev2/rev2.c +++ b/keyboards/melgeek/mj64/rev2/rev2.c @@ -18,7 +18,7 @@ #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { {0, CS9_SW1, CS8_SW1, CS7_SW1}, /* RGB1 */ {0, CS9_SW2, CS8_SW2, CS7_SW2}, /* RGB2 */ {0, CS9_SW3, CS8_SW3, CS7_SW3}, /* RGB3 */ diff --git a/keyboards/melgeek/mj64/rev3/rev3.c b/keyboards/melgeek/mj64/rev3/rev3.c index 2a1283ec70..b67dbee75b 100644 --- a/keyboards/melgeek/mj64/rev3/rev3.c +++ b/keyboards/melgeek/mj64/rev3/rev3.c @@ -18,7 +18,7 @@ #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { {0, CS9_SW1, CS8_SW1, CS7_SW1}, /* RGB1 */ {0, CS9_SW2, CS8_SW2, CS7_SW2}, /* RGB3 */ {0, CS9_SW3, CS8_SW3, CS7_SW3}, /* RGB4 */ diff --git a/keyboards/melgeek/mj65/rev3/rev3.c b/keyboards/melgeek/mj65/rev3/rev3.c index 6335edd796..f02c29e747 100644 --- a/keyboards/melgeek/mj65/rev3/rev3.c +++ b/keyboards/melgeek/mj65/rev3/rev3.c @@ -18,7 +18,7 @@ #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { {0, CS9_SW1, CS8_SW1, CS7_SW1}, /* RGB1 */ {0, CS9_SW2, CS8_SW2, CS7_SW2}, /* RGB2 */ {0, CS9_SW3, CS8_SW3, CS7_SW3}, /* RGB3 */ diff --git a/keyboards/melgeek/mojo68/rev1/rev1.c b/keyboards/melgeek/mojo68/rev1/rev1.c index cc45417e88..27c9212ac6 100755 --- a/keyboards/melgeek/mojo68/rev1/rev1.c +++ b/keyboards/melgeek/mojo68/rev1/rev1.c @@ -18,7 +18,7 @@ #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { {0, CS9_SW1, CS8_SW1, CS7_SW1}, /* RGB1 */ {0, CS9_SW2, CS8_SW2, CS7_SW2}, /* RGB2 */ {0, CS9_SW3, CS8_SW3, CS7_SW3}, /* RGB3 */ diff --git a/keyboards/melgeek/mojo75/rev1/rev1.c b/keyboards/melgeek/mojo75/rev1/rev1.c index 07ae916da2..ae103801e2 100644 --- a/keyboards/melgeek/mojo75/rev1/rev1.c +++ b/keyboards/melgeek/mojo75/rev1/rev1.c @@ -18,7 +18,7 @@ #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { {0, CS6_SW1, CS5_SW1, CS4_SW1}, /* RGB1 */ {0, CS6_SW2, CS5_SW2, CS4_SW2}, /* RGB2 */ {0, CS6_SW3, CS5_SW3, CS4_SW3}, /* RGB3 */ diff --git a/keyboards/melgeek/z70ultra/z70ultra.c b/keyboards/melgeek/z70ultra/z70ultra.c index 552576cd7c..6be690c01e 100644 --- a/keyboards/melgeek/z70ultra/z70ultra.c +++ b/keyboards/melgeek/z70ultra/z70ultra.c @@ -18,7 +18,7 @@ #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { {0, CS28_SW1, CS30_SW1, CS29_SW1}, /* RGB10 */ {0, CS28_SW2, CS30_SW2, CS29_SW2}, /* RGB11 */ {0, CS28_SW3, CS30_SW3, CS29_SW3}, /* RGB12 */ diff --git a/keyboards/miller/gm862/gm862.c b/keyboards/miller/gm862/gm862.c index d67104838b..5262957767 100644 --- a/keyboards/miller/gm862/gm862.c +++ b/keyboards/miller/gm862/gm862.c @@ -1,7 +1,7 @@ #include "gm862.h" #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { {0, B_1, A_1, C_1}, {0, B_2, A_2, C_2}, {0, B_3, A_3, C_3}, diff --git a/keyboards/moonlander/moonlander.c b/keyboards/moonlander/moonlander.c index 8688b9efa4..3f9b3d40a4 100644 --- a/keyboards/moonlander/moonlander.c +++ b/keyboards/moonlander/moonlander.c @@ -203,7 +203,7 @@ layer_state_t layer_state_set_kb(layer_state_t state) { #ifdef RGB_MATRIX_ENABLE // clang-format off -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | R location diff --git a/keyboards/mt64rgb/mt64rgb.c b/keyboards/mt64rgb/mt64rgb.c index a0b8e8da71..f0c444e8fa 100644 --- a/keyboards/mt64rgb/mt64rgb.c +++ b/keyboards/mt64rgb/mt64rgb.c @@ -16,7 +16,7 @@ #include "mt64rgb.h" #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | R location diff --git a/keyboards/mt84/mt84.c b/keyboards/mt84/mt84.c index 9b00aa635e..e15a1ff951 100644 --- a/keyboards/mt84/mt84.c +++ b/keyboards/mt84/mt84.c @@ -16,7 +16,7 @@ #include "mt84.h" #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | R location diff --git a/keyboards/neson_design/n6/n6.c b/keyboards/neson_design/n6/n6.c index 15f14d7e32..e99467fa0c 100644 --- a/keyboards/neson_design/n6/n6.c +++ b/keyboards/neson_design/n6/n6.c @@ -187,7 +187,7 @@ static void self_testing(void) update_ticks(); } -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | R location diff --git a/keyboards/opendeck/32/rev1/rev1.c b/keyboards/opendeck/32/rev1/rev1.c index 91f59a60b7..332dc3cc40 100644 --- a/keyboards/opendeck/32/rev1/rev1.c +++ b/keyboards/opendeck/32/rev1/rev1.c @@ -17,7 +17,7 @@ #include "rev1.h" #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | R location diff --git a/keyboards/planck/ez/ez.c b/keyboards/planck/ez/ez.c index 27cb2a1d1d..5c68726a01 100644 --- a/keyboards/planck/ez/ez.c +++ b/keyboards/planck/ez/ez.c @@ -21,7 +21,7 @@ keyboard_config_t keyboard_config; #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | R location diff --git a/keyboards/planck/light/light.c b/keyboards/planck/light/light.c index 839848228d..1967d318d4 100644 --- a/keyboards/planck/light/light.c +++ b/keyboards/planck/light/light.c @@ -16,7 +16,7 @@ #include "light.h" -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | R location diff --git a/keyboards/playkbtw/pk64rgb/pk64rgb.c b/keyboards/playkbtw/pk64rgb/pk64rgb.c index 244a479672..bc1f63a5ba 100644 --- a/keyboards/playkbtw/pk64rgb/pk64rgb.c +++ b/keyboards/playkbtw/pk64rgb/pk64rgb.c @@ -17,7 +17,7 @@ #include "pk64rgb.h" #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | R location diff --git a/keyboards/smallkeyboard/smallkeyboard.c b/keyboards/smallkeyboard/smallkeyboard.c index f89a6d32b3..af38cb6121 100644 --- a/keyboards/smallkeyboard/smallkeyboard.c +++ b/keyboards/smallkeyboard/smallkeyboard.c @@ -17,7 +17,7 @@ #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | R location diff --git a/keyboards/terrazzo/terrazzo.c b/keyboards/terrazzo/terrazzo.c index 19ac6be491..731efec20c 100644 --- a/keyboards/terrazzo/terrazzo.c +++ b/keyboards/terrazzo/terrazzo.c @@ -21,7 +21,7 @@ #include "print.h" #include "quantum.h" -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * https://cdn-learn.adafruit.com/downloads/pdf/adafruit-15x7-7x15-charlieplex-led-matrix-charliewing-featherwing.pdf */ diff --git a/keyboards/tkc/portico/portico.c b/keyboards/tkc/portico/portico.c index e3d3a14880..0e2b4b2499 100644 --- a/keyboards/tkc/portico/portico.c +++ b/keyboards/tkc/portico/portico.c @@ -19,7 +19,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { { 0, C2_1, C3_1, C4_1 }, { 0, C1_1, C3_2, C4_2 }, { 0, C1_2, C2_2, C4_3 }, diff --git a/keyboards/whitefox/whitefox.c b/keyboards/whitefox/whitefox.c index b17af15127..99c59f7732 100644 --- a/keyboards/whitefox/whitefox.c +++ b/keyboards/whitefox/whitefox.c @@ -18,7 +18,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. #include "whitefox.h" #ifdef LED_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { // The numbers in the comments are the led numbers DXX on the PCB /* Refer to IS31 manual for these locations * driver diff --git a/keyboards/wilba_tech/wt_rgb_backlight.c b/keyboards/wilba_tech/wt_rgb_backlight.c index 63763c6c90..cc34a90c75 100644 --- a/keyboards/wilba_tech/wt_rgb_backlight.c +++ b/keyboards/wilba_tech/wt_rgb_backlight.c @@ -158,7 +158,7 @@ uint32_t g_any_key_hit = 0; // ADDR_2 is not needed. it is here as a dummy #define ISSI_ADDR_1 0x50 -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | R location @@ -239,7 +239,7 @@ const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { #define ISSI_ADDR_1 0x50 #define ISSI_ADDR_2 0x52 -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | R location @@ -382,7 +382,7 @@ const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { // set to 0 for write, 1 for read (as per I2C protocol) #define ISSI_ADDR_1 0x74 -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | R location @@ -414,7 +414,7 @@ const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { #define ISSI_ADDR_2 0x76 // 11101[10] <- SDA #define ISSI_ADDR_3 0x75 // 11101[01] <- SCL -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | R location @@ -541,7 +541,7 @@ const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { #define ISSI_ADDR_1 0x74 #define ISSI_ADDR_2 0x76 -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | R location @@ -622,7 +622,7 @@ const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { #define ISSI_ADDR_1 0x74 #define ISSI_ADDR_2 0x77 -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | R location @@ -709,7 +709,7 @@ const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { #define ISSI_ADDR_1 0x74 #define ISSI_ADDR_2 -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { {0, C1_9, C3_10, C4_10}, // LB1 {0, C1_10, C2_10, C4_11}, // LB2 {0, C1_11, C2_11, C3_11}, // LB3 @@ -729,7 +729,7 @@ const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { #define ISSI_ADDR_1 0x74 #define ISSI_ADDR_2 0x76 -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | R location diff --git a/keyboards/xbows/knight/knight.c b/keyboards/xbows/knight/knight.c index 539ecb653e..8c2fd9dfa2 100644 --- a/keyboards/xbows/knight/knight.c +++ b/keyboards/xbows/knight/knight.c @@ -15,7 +15,7 @@ */ #include "knight.h" #ifdef RGB_MATRIX_ENABLE - const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { + const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { {0, C1_3, C2_3, C3_3}, // L01 {0, C1_4, C2_4, C3_4}, // L02 diff --git a/keyboards/xbows/knight_plus/knight_plus.c b/keyboards/xbows/knight_plus/knight_plus.c index c5dd1a5fd6..ede23dc63d 100644 --- a/keyboards/xbows/knight_plus/knight_plus.c +++ b/keyboards/xbows/knight_plus/knight_plus.c @@ -15,7 +15,7 @@ */ #include "knight_plus.h" #ifdef RGB_MATRIX_ENABLE - const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { + const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { {0, C1_3, C2_3, C3_3}, // L01 {0, C1_4, C2_4, C3_4}, // L02 diff --git a/keyboards/xbows/nature/nature.c b/keyboards/xbows/nature/nature.c index b7b10d5abb..80d695fecf 100644 --- a/keyboards/xbows/nature/nature.c +++ b/keyboards/xbows/nature/nature.c @@ -15,7 +15,7 @@ */ #include "nature.h" #ifdef RGB_MATRIX_ENABLE - const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { + const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { {0, C1_3, C2_3, C3_3}, // L01 {0, C1_4, C2_4, C3_4}, // L02 diff --git a/keyboards/xbows/numpad/numpad.c b/keyboards/xbows/numpad/numpad.c index 8f25152e33..bbc2a1e98a 100644 --- a/keyboards/xbows/numpad/numpad.c +++ b/keyboards/xbows/numpad/numpad.c @@ -15,7 +15,7 @@ */ #include "numpad.h" #ifdef RGB_MATRIX_ENABLE - const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { + const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { {0, C3_3, C2_3, C1_3}, // L01 {0, C3_4, C2_4, C1_4}, // L02 diff --git a/keyboards/xbows/ranger/ranger.c b/keyboards/xbows/ranger/ranger.c index 618afbdbf2..9a09918967 100644 --- a/keyboards/xbows/ranger/ranger.c +++ b/keyboards/xbows/ranger/ranger.c @@ -15,7 +15,7 @@ */ #include "ranger.h" #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { {0, C3_3, C2_3, C1_3}, // L01 {0, C3_4, C2_4, C1_4}, // L02 diff --git a/keyboards/xbows/woody/woody.c b/keyboards/xbows/woody/woody.c index 39d87442c6..41601d39a9 100644 --- a/keyboards/xbows/woody/woody.c +++ b/keyboards/xbows/woody/woody.c @@ -1,6 +1,6 @@ #include "woody.h" #ifdef RGB_MATRIX_ENABLE -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { {0, C8_8, C7_8, C6_8}, // LA17 {0, C9_8, C7_7, C6_7}, // LA16 diff --git a/keyboards/xelus/dawn60/rev1_qmk/rev1_qmk.c b/keyboards/xelus/dawn60/rev1_qmk/rev1_qmk.c index c6ddef0931..8b044ee4f6 100644 --- a/keyboards/xelus/dawn60/rev1_qmk/rev1_qmk.c +++ b/keyboards/xelus/dawn60/rev1_qmk/rev1_qmk.c @@ -25,7 +25,7 @@ #ifdef RGB_MATRIX_ENABLE LED_TYPE rgb_matrix_ws2812_array[WS2812_LED_TOTAL]; -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | R location diff --git a/keyboards/xelus/pachi/rgb/rev1/rev1.c b/keyboards/xelus/pachi/rgb/rev1/rev1.c index 74f46e6812..7074265009 100644 --- a/keyboards/xelus/pachi/rgb/rev1/rev1.c +++ b/keyboards/xelus/pachi/rgb/rev1/rev1.c @@ -22,7 +22,7 @@ void matrix_io_delay(void) { __asm__ volatile("nop\nnop\nnop\n"); } #ifdef RGB_MATRIX_ENABLE #include "i2c_master.h" #include "drivers/led/issi/is31fl3741.h" -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | R location diff --git a/keyboards/xelus/pachi/rgb/rev2/rev2.c b/keyboards/xelus/pachi/rgb/rev2/rev2.c index 3a2e7cacad..b8a7bc2730 100644 --- a/keyboards/xelus/pachi/rgb/rev2/rev2.c +++ b/keyboards/xelus/pachi/rgb/rev2/rev2.c @@ -22,7 +22,7 @@ void matrix_io_delay(void) { __asm__ volatile("nop\nnop\nnop\n"); } #ifdef RGB_MATRIX_ENABLE #include "i2c_master.h" #include "drivers/led/issi/is31fl3741.h" -const is31_led __flash g_is31_leds[DRIVER_LED_TOTAL] = { +const is31_led PROGMEM g_is31_leds[DRIVER_LED_TOTAL] = { /* Refer to IS31 manual for these locations * driver * | R location diff --git a/platforms/progmem.h b/platforms/progmem.h index a70d8e299f..3a7a169682 100644 --- a/platforms/progmem.h +++ b/platforms/progmem.h @@ -5,7 +5,6 @@ #else # include <string.h> # define PROGMEM -# define __flash # define PSTR(x) x # define PGM_P const char* # define memcpy_P(dest, src, n) memcpy(dest, src, n) From d9393b86842b7ef143259b5f771ae7969f98cbb4 Mon Sep 17 00:00:00 2001 From: Isaac Elenbaas <isaacelenbaas@gmail.com> Date: Thu, 25 Nov 2021 07:12:14 -0500 Subject: [PATCH 577/595] Add Retro Shift (Auto Shift for Tap Hold via Retro Tapping) and Custom Auto Shifts (#11059) * Add Retro Shift and Custom Auto Shifts * Fix compilation errors with no RETRO_SHIFT value --- docs/feature_auto_shift.md | 176 +++++++- docs/tap_hold.md | 4 + quantum/action.c | 19 +- quantum/action_tapping.c | 106 ++++- quantum/process_keycode/process_auto_shift.c | 419 +++++++++++++++---- quantum/process_keycode/process_auto_shift.h | 22 +- 6 files changed, 621 insertions(+), 125 deletions(-) diff --git a/docs/feature_auto_shift.md b/docs/feature_auto_shift.md index a54cd79e42..99b0ca3c8a 100644 --- a/docs/feature_auto_shift.md +++ b/docs/feature_auto_shift.md @@ -26,20 +26,26 @@ down will repeat the shifted key, though this can be disabled with once then immediately (within `TAPPING_TERM`) hold it down again (this works with the shifted value as well if auto-repeat is disabled). +There are also the `get_auto_shift_repeat` and `get_auto_shift_no_auto_repeat` +functions for more granular control. Neither will have an effect unless +`AUTO_SHIFT_REPEAT_PER_KEY` or `AUTO_SHIFT_NO_AUTO_REPEAT_PER_KEY` respectively +are defined. + ## Are There Limitations to Auto Shift? Yes, unfortunately. -You will have characters that are shifted when you did not intend on shifting, and -other characters you wanted shifted, but were not. This simply comes down to -practice. As we get in a hurry, we think we have hit the key long enough for a -shifted version, but we did not. On the other hand, we may think we are tapping -the keys, but really we have held it for a little longer than anticipated. - -Additionally, with keyrepeat the desired shift state can get mixed up. It will -always 'belong' to the last key pressed. For example, keyrepeating a capital -and then tapping something lowercase (whether or not it's an Auto Shift key) -will result in the capital's *key* still being held, but shift not. +1. You will have characters that are shifted when you did not intend on shifting, and + other characters you wanted shifted, but were not. This simply comes down to + practice. As we get in a hurry, we think we have hit the key long enough for a + shifted version, but we did not. On the other hand, we may think we are tapping + the keys, but really we have held it for a little longer than anticipated. +2. Additionally, with keyrepeat the desired shift state can get mixed up. It will + always 'belong' to the last key pressed. For example, keyrepeating a capital + and then tapping something lowercase (whether or not it's an Auto Shift key) + will result in the capital's *key* still being held, but shift not. +3. Auto Shift does not apply to Tap Hold keys. For automatic shifting of Tap Hold + keys see [Retro Shift](#retro-shift). ## How Do I Enable Auto Shift? @@ -96,6 +102,34 @@ quicker than normal and you will be set. ?> Auto Shift has three special keys that can help you get this value right very quick. See "Auto Shift Setup" for more details! +For more granular control of this feature, you can add the following to your `config.h`: + +```c +#define AUTO_SHIFT_TIMEOUT_PER_KEY +``` + +You can then add the following function to your keymap: + +```c +uint16_t get_autoshift_timeout(uint16_t keycode, keyrecord_t *record) { + switch(keycode) { + case AUTO_SHIFT_NUMERIC: + return 2 * get_generic_autoshift_timeout(); + case AUTO_SHIFT_SPECIAL: + return get_generic_autoshift_timeout() + 50; + case AUTO_SHIFT_ALPHA: + default: + return get_generic_autoshift_timeout(); + } +} +``` + +Note that you cannot override individual keys that are in one of those groups +if you are using them; trying to add a case for `KC_A` in the above example will +not compile as `AUTO_SHIFT_ALPHA` is there. A possible solution is a second switch +above to handle individual keys with no default case and only referencing the +groups in the below fallback switch. + ### NO_AUTO_SHIFT_SPECIAL (simple define) Do not Auto Shift special keys, which include -\_, =+, [{, ]}, ;:, '", ,<, .>, @@ -109,11 +143,24 @@ Do not Auto Shift numeric keys, zero through nine. Do not Auto Shift alpha characters, which include A through Z. -### Auto Shift Per Key +### Auto Shift Per Key -This is a function that allows you to determine which keys shold be autoshifted, much like the tap-hold keys. +There are functions that allows you to determine which keys shold be autoshifted, much like the tap-hold keys. -The default function looks like this: +The first of these, used to simply add a key to Auto Shift, is `get_custom_auto_shifted_key`: + +```c +bool get_custom_auto_shifted_key(uint16_t keycode, keyrecord_t *record) { + switch(keycode) { + case KC_DOT: + return true; + default: + return false; + } +} +``` + +For more granular control, there is `get_auto_shifted_key`. The default function looks like this: ```c bool get_auto_shifted_key(uint16_t keycode, keyrecord_t *record) { @@ -131,9 +178,10 @@ bool get_auto_shifted_key(uint16_t keycode, keyrecord_t *record) { # endif return true; } - return false; + return get_custom_auto_shifted_key(keycode, record); } ``` + This functionality is enabled by default, and does not need a define. ### AUTO_SHIFT_REPEAT (simple define) @@ -144,6 +192,106 @@ Enables keyrepeat. Disables automatically keyrepeating when `AUTO_SHIFT_TIMEOUT` is exceeded. +## Custom Shifted Values + +Especially on small keyboards, the default shifted value for many keys is not +optimal. To provide more customizability, there are two user-definable +functions, `autoshift_press/release_user`. These register or unregister the +correct value for the passed key. Below is an example adding period to Auto +Shift and making its shifted value exclamation point. Make sure to use weak +mods - setting real would make any keys following it use their shifted values +as if you were holding the key. Clearing of modifiers is handled by Auto Shift, +and the OS-sent shift value if keyrepeating multiple keys is always that of +the last key pressed (whether or not it's an Auto Shift key). + +You can also have non-shifted keys for the shifted values (or even no shifted +value), just don't set a shift modifier! + +```c +bool get_custom_auto_shifted_key(uint16_t keycode, keyrecord_t *record) { + switch(keycode) { + case KC_DOT: + return true; + default: + return false; + } +} + +void autoshift_press_user(uint16_t keycode, bool shifted, keyrecord_t *record) { + switch(keycode) { + case KC_DOT: + register_code16((!shifted) ? KC_DOT : KC_EXLM); + break; + default: + if (shifted) { + add_weak_mods(MOD_BIT(KC_LSFT)); + } + // & 0xFF gets the Tap key for Tap Holds, required when using Retro Shift + register_code16((IS_RETRO(keycode)) ? keycode & 0xFF : keycode); + } +} + +void autoshift_release_user(uint16_t keycode, bool shifted, keyrecord_t *record) { + switch(keycode) { + case KC_DOT: + unregister_code16((!shifted) ? KC_DOT : KC_EXLM); + break; + default: + // & 0xFF gets the Tap key for Tap Holds, required when using Retro Shift + // The IS_RETRO check isn't really necessary here, always using + // keycode & 0xFF would be fine. + unregister_code16((IS_RETRO(keycode)) ? keycode & 0xFF : keycode); + } +} +``` + +## Retro Shift + +Holding and releasing a Tap Hold key without pressing another key will ordinarily +result in only the hold. With `retro shift` enabled this action will instead +produce a shifted version of the tap keycode on release. + +It does not require [Retro Tapping](tap_hold.md#retro-tapping) to be enabled, and +if both are enabled the state of `retro tapping` will only apply if the tap keycode +is not matched by Auto Shift. `RETRO_TAPPING_PER_KEY` and its corresponding +function, however, are checked before `retro shift` is applied. + +To enable `retro shift`, add the following to your `config.h`: + +```c +#define RETRO_SHIFT +``` + +If `RETRO_SHIFT` is defined to a value, hold times greater than that value will +not produce a tap on release for Mod Taps, and instead triggers the hold action. +This enables modifiers to be held for combining with mouse clicks without +generating taps on release. For example: + +```c +#define RETRO_SHIFT 500 +``` + +This value (if set) must be greater than one's `TAPPING_TERM`, as the key press +must be designated as a 'hold' by `process_tapping` before we send the modifier. +There is no such limitation in regards to `AUTO_SHIFT_TIMEOUT` for normal keys. + +### Retro Shift and Tap Hold Configurations + +Tap Hold Configurations work a little differently when using Retro Shift. +Referencing `TAPPING_TERM` makes little sense, as holding longer would result in +shifting one of the keys. + +`IGNORE_MOD_TAP_INTERRUPT` changes *only* rolling from a mod tap (releasing it +first), sending both keys instead of the modifier on the second. Its effects on +nested presses are ignored. + +As nested taps were changed to act as though `PERMISSIVE_HOLD` is set unless only +`IGNORE_MOD_TAP_INTERRUPT` is (outside of Retro Shift), and Retro Shift ignores +`IGNORE_MOD_TAP_INTERRUPT`, `PERMISSIVE_HOLD` has no effect on Mod Taps. + +Nested taps will *always* act as though the `TAPPING_TERM` was exceeded for both +Mod and Layer Tap keys. + ## Using Auto Shift Setup This will enable you to define three keys temporarily to increase, decrease and report your `AUTO_SHIFT_TIMEOUT`. diff --git a/docs/tap_hold.md b/docs/tap_hold.md index dbad48fd9f..a343d0bc3e 100644 --- a/docs/tap_hold.md +++ b/docs/tap_hold.md @@ -268,6 +268,10 @@ bool get_retro_tapping(uint16_t keycode, keyrecord_t *record) { } ``` +### Retro Shift + +[Auto Shift,](feature_auto_shift.md) has its own version of `retro tapping` called `retro shift`. It is extremely similar to `retro tapping`, but holding the key past `AUTO_SHIFT_TIMEOUT` results in the value it sends being shifted. Other configurations also affect it differently; see [here](feature_auto_shift.md#retro-shift) for more information. + ## Why do we include the key record for the per key functions? One thing that you may notice is that we include the key record for all of the "per key" functions, and may be wondering why we do that. diff --git a/quantum/action.c b/quantum/action.c index ceaaa551f5..5e81efb671 100644 --- a/quantum/action.c +++ b/quantum/action.c @@ -45,10 +45,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. int tp_buttons; -#if defined(RETRO_TAPPING) || defined(RETRO_TAPPING_PER_KEY) +#if defined(RETRO_TAPPING) || defined(RETRO_TAPPING_PER_KEY) || (defined(AUTO_SHIFT_ENABLE) && defined(RETRO_SHIFT)) int retro_tapping_counter = 0; #endif +#if defined(AUTO_SHIFT_ENABLE) && defined(RETRO_SHIFT) && !defined(NO_ACTION_TAPPING) +# include "process_auto_shift.h" +#endif + #ifdef IGNORE_MOD_TAP_INTERRUPT_PER_KEY __attribute__((weak)) bool get_ignore_mod_tap_interrupt(uint16_t keycode, keyrecord_t *record) { return false; } #endif @@ -69,7 +73,7 @@ void action_exec(keyevent_t event) { dprint("EVENT: "); debug_event(event); dprintln(); -#if defined(RETRO_TAPPING) || defined(RETRO_TAPPING_PER_KEY) +#if defined(RETRO_TAPPING) || defined(RETRO_TAPPING_PER_KEY) || (defined(AUTO_SHIFT_ENABLE) && defined(RETRO_SHIFT)) retro_tapping_counter++; #endif } @@ -106,6 +110,11 @@ void action_exec(keyevent_t event) { #endif #ifndef NO_ACTION_TAPPING +# if defined(AUTO_SHIFT_ENABLE) && defined(RETRO_SHIFT) + if (event.pressed) { + retroshift_poll_time(&event); + } +# endif if (IS_NOEVENT(record.event) || pre_process_record_quantum(&record)) { action_tapping_process(record); } @@ -730,7 +739,7 @@ void process_action(keyrecord_t *record, action_t action) { #endif #ifndef NO_ACTION_TAPPING -# if defined(RETRO_TAPPING) || defined(RETRO_TAPPING_PER_KEY) +# if defined(RETRO_TAPPING) || defined(RETRO_TAPPING_PER_KEY) || (defined(AUTO_SHIFT_ENABLE) && defined(RETRO_SHIFT)) if (!is_tap_action(action)) { retro_tapping_counter = 0; } else { @@ -747,7 +756,11 @@ void process_action(keyrecord_t *record, action_t action) { get_retro_tapping(get_event_keycode(record->event, false), record) && # endif retro_tapping_counter == 2) { +# if defined(AUTO_SHIFT_ENABLE) && defined(RETRO_SHIFT) + process_auto_shift(action.layer_tap.code, record); +# else tap_code(action.layer_tap.code); +# endif } retro_tapping_counter = 0; } diff --git a/quantum/action_tapping.c b/quantum/action_tapping.c index 60e56fb811..0586fad421 100644 --- a/quantum/action_tapping.c +++ b/quantum/action_tapping.c @@ -44,6 +44,10 @@ __attribute__((weak)) bool get_permissive_hold(uint16_t keycode, keyrecord_t *re __attribute__((weak)) bool get_hold_on_other_key_press(uint16_t keycode, keyrecord_t *record) { return false; } # endif +# if defined(AUTO_SHIFT_ENABLE) && defined(RETRO_SHIFT) +# include "process_auto_shift.h" +# endif + static keyrecord_t tapping_key = {}; static keyrecord_t waiting_buffer[WAITING_BUFFER_SIZE] = {}; static uint8_t waiting_buffer_head = 0; @@ -107,12 +111,29 @@ void action_tapping_process(keyrecord_t record) { /* return true when key event is processed or consumed. */ bool process_tapping(keyrecord_t *keyp) { keyevent_t event = keyp->event; +# if (defined(AUTO_SHIFT_ENABLE) && defined(RETRO_SHIFT)) || defined(TAPPING_TERM_PER_KEY) || defined(PERMISSIVE_HOLD_PER_KEY) || defined(TAPPING_FORCE_HOLD_PER_KEY) || defined(HOLD_ON_OTHER_KEYPRESS_PER_KEY) + uint16_t tapping_keycode = get_record_keycode(&tapping_key, false); +# endif // if tapping if (IS_TAPPING_PRESSED()) { - if (WITHIN_TAPPING_TERM(event)) { + // clang-format off + if (WITHIN_TAPPING_TERM(event) +# if defined(AUTO_SHIFT_ENABLE) && defined(RETRO_SHIFT) + || ( +# ifdef RETRO_TAPPING_PER_KEY + get_retro_tapping(tapping_keycode, keyp) && +# endif + (RETRO_SHIFT + 0) != 0 && TIMER_DIFF_16(event.time, tapping_key.event.time) < (RETRO_SHIFT + 0) + ) +# endif + ) { + // clang-format on if (tapping_key.tap.count == 0) { if (IS_TAPPING_RECORD(keyp) && !event.pressed) { +# if defined(AUTO_SHIFT_ENABLE) && defined(RETRO_SHIFT) + retroshift_swap_times(); +# endif // first tap! debug("Tapping: First tap(0->1).\n"); tapping_key.tap.count = 1; @@ -128,22 +149,70 @@ bool process_tapping(keyrecord_t *keyp) { * This can register the key before settlement of tapping, * useful for long TAPPING_TERM but may prevent fast typing. */ -# if defined(TAPPING_TERM_PER_KEY) || (TAPPING_TERM >= 500) || defined(PERMISSIVE_HOLD) || defined(PERMISSIVE_HOLD_PER_KEY) - else if ((( + // clang-format off +# if defined(TAPPING_TERM_PER_KEY) || (TAPPING_TERM >= 500) || defined(PERMISSIVE_HOLD) || defined(PERMISSIVE_HOLD_PER_KEY) || (defined(AUTO_SHIFT_ENABLE) && defined(RETRO_SHIFT)) + else if ( + ( + ( + ( # ifdef TAPPING_TERM_PER_KEY - get_tapping_term(get_record_keycode(&tapping_key, false), keyp) + get_tapping_term(tapping_keycode, keyp) # else - TAPPING_TERM + TAPPING_TERM # endif - >= 500) + >= 500 + ) # ifdef PERMISSIVE_HOLD_PER_KEY - || get_permissive_hold(get_record_keycode(&tapping_key, false), keyp) + || get_permissive_hold(tapping_keycode, keyp) # elif defined(PERMISSIVE_HOLD) - || true + || true +# endif + ) && IS_RELEASED(event) && waiting_buffer_typed(event) + ) + // Causes nested taps to not wait past TAPPING_TERM/RETRO_SHIFT + // unnecessarily and fixes them for Layer Taps. +# if defined(AUTO_SHIFT_ENABLE) && defined(RETRO_SHIFT) + || ( +# ifdef RETRO_TAPPING_PER_KEY + get_retro_tapping(tapping_keycode, keyp) && +# endif + ( + // Rolled over the two keys. + ( + ( + false +# if defined(HOLD_ON_OTHER_KEYPRESS) || defined(HOLD_ON_OTHER_KEYPRESS_PER_KEY) + || ( + IS_LT(tapping_keycode) +# ifdef HOLD_ON_OTHER_KEYPRESS_PER_KEY + && get_hold_on_other_keypress(tapping_keycode, keyp) +# endif + ) +# endif +# if !defined(IGNORE_MOD_TAP_INTERRUPT) || defined(IGNORE_MOD_TAP_INTERRUPT_PER_KEY) + || ( + IS_MT(tapping_keycode) +# ifdef IGNORE_MOD_TAP_INTERRUPT_PER_KEY + && !get_ignore_mod_tap_interrupt(tapping_keycode, keyp) +# endif + ) +# endif + ) && tapping_key.tap.interrupted == true + ) + // Makes Retro Shift ignore [IGNORE_MOD_TAP_INTERRUPT's + // effects on nested taps for MTs and the default + // behavior of LTs] below TAPPING_TERM or RETRO_SHIFT. + || ( + IS_RETRO(tapping_keycode) + && (event.key.col != tapping_key.event.key.col || event.key.row != tapping_key.event.key.row) + && IS_RELEASED(event) && waiting_buffer_typed(event) + ) + ) + ) # endif - ) && - IS_RELEASED(event) && waiting_buffer_typed(event)) { + ) { + // clang-format on debug("Tapping: End. No tap. Interfered by typing key\n"); process_record(&tapping_key); tapping_key = (keyrecord_t){}; @@ -181,7 +250,7 @@ bool process_tapping(keyrecord_t *keyp) { tapping_key.tap.interrupted = true; # if defined(HOLD_ON_OTHER_KEY_PRESS) || defined(HOLD_ON_OTHER_KEY_PRESS_PER_KEY) # if defined(HOLD_ON_OTHER_KEY_PRESS_PER_KEY) - if (get_hold_on_other_key_press(get_record_keycode(&tapping_key, false), keyp)) + if (get_hold_on_other_key_press(tapping_keycode, keyp)) # endif { debug("Tapping: End. No tap. Interfered by pressed key\n"); @@ -284,14 +353,25 @@ bool process_tapping(keyrecord_t *keyp) { } } } else if (IS_TAPPING_RELEASED()) { - if (WITHIN_TAPPING_TERM(event)) { + // clang-format off + if (WITHIN_TAPPING_TERM(event) +# if defined(AUTO_SHIFT_ENABLE) && defined(RETRO_SHIFT) + || ( +# ifdef RETRO_TAPPING_PER_KEY + get_retro_tapping(tapping_keycode, keyp) && +# endif + (RETRO_SHIFT + 0) != 0 && TIMER_DIFF_16(event.time, tapping_key.event.time) < (RETRO_SHIFT + 0) + ) +# endif + ) { + // clang-format on if (event.pressed) { if (IS_TAPPING_RECORD(keyp)) { //# ifndef TAPPING_FORCE_HOLD # if !defined(TAPPING_FORCE_HOLD) || defined(TAPPING_FORCE_HOLD_PER_KEY) if ( # ifdef TAPPING_FORCE_HOLD_PER_KEY - !get_tapping_force_hold(get_record_keycode(&tapping_key, false), keyp) && + !get_tapping_force_hold(tapping_keycode, keyp) && # endif !tapping_key.tap.interrupted && tapping_key.tap.count > 0) { // sequential tap. diff --git a/quantum/process_keycode/process_auto_shift.c b/quantum/process_keycode/process_auto_shift.c index 4d928edb57..bbc6367ff1 100644 --- a/quantum/process_keycode/process_auto_shift.c +++ b/quantum/process_keycode/process_auto_shift.c @@ -18,7 +18,6 @@ # include <stdbool.h> # include <stdio.h> - # include "process_auto_shift.h" # ifndef AUTO_SHIFT_DISABLED_AT_STARTUP @@ -27,11 +26,25 @@ # define AUTO_SHIFT_STARTUP_STATE false /* disabled */ # endif -static uint16_t autoshift_time = 0; -static uint16_t autoshift_timeout = AUTO_SHIFT_TIMEOUT; -static uint16_t autoshift_lastkey = KC_NO; +// Stores the last Auto Shift key's up or down time, for evaluation or keyrepeat. +static uint16_t autoshift_time = 0; +# if defined(RETRO_SHIFT) && !defined(NO_ACTION_TAPPING) +// Stores the last key's up or down time, to replace autoshift_time so that Tap Hold times are accurate. +static uint16_t retroshift_time = 0; +// Stores a possibly Retro Shift key's up or down time, as retroshift_time needs +// to be set before the Retro Shift key is evaluated if it is interrupted by an +// Auto Shifted key. +static uint16_t last_retroshift_time; +# endif +static uint16_t autoshift_timeout = AUTO_SHIFT_TIMEOUT; +static uint16_t autoshift_lastkey = KC_NO; +static keyrecord_t autoshift_lastrecord; +// Keys take 8 bits if modifiers are excluded. This records the shift state +// when pressed for each key, so that can be passed to the release function +// and it knows which key needs to be released (if shifted is different base). +static uint16_t autoshift_shift_states[((1 << 8) + 15) / 16]; static struct { - // Whether autoshift is enabled. + // Whether Auto Shift is enabled. bool enabled : 1; // Whether the last auto-shifted key was released after the timeout. This // is used to replicate the last key for a tap-then-hold. @@ -40,43 +53,157 @@ static struct { bool in_progress : 1; // Whether the auto-shifted keypress has been registered. bool holding_shift : 1; -} autoshift_flags = {AUTO_SHIFT_STARTUP_STATE, false, false, false}; + // Whether the user is holding a shift and we removed it. + bool cancelling_lshift : 1; + bool cancelling_rshift : 1; + // clang-format wants to remove the true for some reason. + // clang-format off +} autoshift_flags = {AUTO_SHIFT_STARTUP_STATE, false, false, false, false, false}; +// clang-format on + +/** \brief Called on physical press, returns whether key should be added to Auto Shift */ +__attribute__((weak)) bool get_custom_auto_shifted_key(uint16_t keycode, keyrecord_t *record) { return false; } + +/** \brief Called on physical press, returns whether is Auto Shift key */ +__attribute__((weak)) bool get_auto_shifted_key(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { +# ifndef NO_AUTO_SHIFT_ALPHA + case AUTO_SHIFT_ALPHA: +# endif +# ifndef NO_AUTO_SHIFT_NUMERIC + case AUTO_SHIFT_NUMERIC: +# endif +# ifndef NO_AUTO_SHIFT_SPECIAL + case AUTO_SHIFT_SPECIAL: +# endif + return true; + } + return get_custom_auto_shifted_key(keycode, record); +} + +/** \brief Called to check whether defines should apply if PER_KEY is set for it */ +__attribute__((weak)) bool get_auto_shift_repeat(uint16_t keycode, keyrecord_t *record) { return true; } +__attribute__((weak)) bool get_auto_shift_no_auto_repeat(uint16_t keycode, keyrecord_t *record) { return true; } + +/** \brief Called when an Auto Shift key needs to be pressed */ +__attribute__((weak)) void autoshift_press_user(uint16_t keycode, bool shifted, keyrecord_t *record) { + if (shifted) { + add_weak_mods(MOD_BIT(KC_LSFT)); + } + register_code16((IS_RETRO(keycode)) ? keycode & 0xFF : keycode); +} + +/** \brief Called when an Auto Shift key needs to be released */ +__attribute__((weak)) void autoshift_release_user(uint16_t keycode, bool shifted, keyrecord_t *record) { unregister_code16((IS_RETRO(keycode)) ? keycode & 0xFF : keycode); } + +/** \brief Sets the shift state to use when keyrepeating, required by custom shifts */ +void set_autoshift_shift_state(uint16_t keycode, bool shifted) { + keycode = keycode & 0xFF; + if (shifted) { + autoshift_shift_states[keycode / 16] |= (uint16_t)1 << keycode % 16; + } else { + autoshift_shift_states[keycode / 16] &= ~((uint16_t)1 << keycode % 16); + } +} + +/** \brief Gets the shift state to use when keyrepeating, required by custom shifts */ +bool get_autoshift_shift_state(uint16_t keycode) { + keycode = keycode & 0xFF; + return (autoshift_shift_states[keycode / 16] & (uint16_t)1 << keycode % 16) != (uint16_t)0; +} + +/** \brief Restores the shift key if it was cancelled by Auto Shift */ +static void autoshift_flush_shift(void) { + autoshift_flags.holding_shift = false; + del_weak_mods(MOD_BIT(KC_LSFT)); + if (autoshift_flags.cancelling_lshift) { + autoshift_flags.cancelling_lshift = false; + add_mods(MOD_BIT(KC_LSFT)); + } + if (autoshift_flags.cancelling_rshift) { + autoshift_flags.cancelling_rshift = false; + add_mods(MOD_BIT(KC_RSFT)); + } + send_keyboard_report(); +} /** \brief Record the press of an autoshiftable key * * \return Whether the record should be further processed. */ static bool autoshift_press(uint16_t keycode, uint16_t now, keyrecord_t *record) { - if (!autoshift_flags.enabled) { - return true; - } - + // clang-format off + if ((get_mods() +# if !defined(NO_ACTION_ONESHOT) && !defined(NO_ACTION_TAPPING) + | get_oneshot_mods() +# endif + ) & (~MOD_BIT(KC_LSFT)) + ) { + // clang-format on + // Prevents keyrepeating unshifted value of key after using it in a key combo. + autoshift_lastkey = KC_NO; # ifndef AUTO_SHIFT_MODIFIERS - if (get_mods()) { - return true; - } + // We can't return true here anymore because custom unshifted values are + // possible and there's no good way to tell whether the press returned + // true upon release. + set_autoshift_shift_state(keycode, false); + autoshift_press_user(keycode, false, record); +# if !defined(NO_ACTION_ONESHOT) && !defined(NO_ACTION_TAPPING) + set_oneshot_mods(get_oneshot_mods() & (~MOD_BIT(KC_LSFT))); + clear_oneshot_layer_state(ONESHOT_OTHER_KEY_PRESSED); +# endif + return false; # endif -# ifdef AUTO_SHIFT_REPEAT - const uint16_t elapsed = TIMER_DIFF_16(now, autoshift_time); -# ifndef AUTO_SHIFT_NO_AUTO_REPEAT - if (!autoshift_flags.lastshifted) { + } + + // Store record to be sent to user functions if there's no release record then. + autoshift_lastrecord = *record; + autoshift_lastrecord.event.pressed = false; + autoshift_lastrecord.event.time = 0; + // clang-format off +# if defined(AUTO_SHIFT_REPEAT) || defined(AUTO_SHIFT_REPEAT_PER_KEY) + if (keycode == autoshift_lastkey && +# ifdef AUTO_SHIFT_REPEAT_PER_KEY + get_auto_shift_repeat(autoshift_lastkey, record) && # endif - if (elapsed < TAPPING_TERM && keycode == autoshift_lastkey) { - // Allow a tap-then-hold for keyrepeat. - if (!autoshift_flags.lastshifted) { - register_code(autoshift_lastkey); - } else { - // Simulate pressing the shift key. - add_weak_mods(MOD_BIT(KC_LEFT_SHIFT)); - register_code(autoshift_lastkey); - } - return false; +# if !defined(AUTO_SHIFT_NO_AUTO_REPEAT) || defined(AUTO_SHIFT_NO_AUTO_REPEAT_PER_KEY) + ( + !autoshift_flags.lastshifted +# ifdef AUTO_SHIFT_NO_AUTO_REPEAT_PER_KEY + || get_auto_shift_no_auto_repeat(autoshift_lastkey, record) +# endif + ) && +# endif + TIMER_DIFF_16(now, autoshift_time) < +# ifdef TAPPING_TERM_PER_KEY + get_tapping_term(autoshift_lastkey, record) +# else + TAPPING_TERM +# endif + ) { + // clang-format on + // Allow a tap-then-hold for keyrepeat. + if (get_mods() & MOD_BIT(KC_LSFT)) { + autoshift_flags.cancelling_lshift = true; + del_mods(MOD_BIT(KC_LSFT)); } -# ifndef AUTO_SHIFT_NO_AUTO_REPEAT + if (get_mods() & MOD_BIT(KC_RSFT)) { + autoshift_flags.cancelling_rshift = true; + del_mods(MOD_BIT(KC_RSFT)); + } + // autoshift_shift_state doesn't need to be changed. + autoshift_press_user(autoshift_lastkey, autoshift_flags.lastshifted, record); + return false; } -# endif # endif + // Use physical shift state of press event to be more like normal typing. +# if !defined(NO_ACTION_ONESHOT) && !defined(NO_ACTION_TAPPING) + autoshift_flags.lastshifted = (get_mods() | get_oneshot_mods()) & MOD_BIT(KC_LSFT); + set_oneshot_mods(get_oneshot_mods() & (~MOD_BIT(KC_LSFT))); +# else + autoshift_flags.lastshifted = get_mods() & MOD_BIT(KC_LSFT); +# endif // Record the keycode so we can simulate it later. autoshift_lastkey = keycode; autoshift_time = now; @@ -90,51 +217,70 @@ static bool autoshift_press(uint16_t keycode, uint16_t now, keyrecord_t *record) /** \brief Registers an autoshiftable key under the right conditions * - * If the autoshift delay has elapsed, register a shift and the key. + * If autoshift_timeout has elapsed, register a shift and the key. * - * If the autoshift key is released before the delay has elapsed, register the + * If the Auto Shift key is released before the delay has elapsed, register the * key without a shift. + * + * Called on key down with keycode=KC_NO, auto-shifted key up, and timeout. */ -static void autoshift_end(uint16_t keycode, uint16_t now, bool matrix_trigger) { - // Called on key down with KC_NO, auto-shifted key up, and timeout. - if (autoshift_flags.in_progress) { +static void autoshift_end(uint16_t keycode, uint16_t now, bool matrix_trigger, keyrecord_t *record) { + if (autoshift_flags.in_progress && (keycode == autoshift_lastkey || keycode == KC_NO)) { // Process the auto-shiftable key. autoshift_flags.in_progress = false; - - // Time since the initial press was recorded. - const uint16_t elapsed = TIMER_DIFF_16(now, autoshift_time); - if (elapsed < autoshift_timeout) { - register_code(autoshift_lastkey); - autoshift_flags.lastshifted = false; - } else { - // Simulate pressing the shift key. - add_weak_mods(MOD_BIT(KC_LEFT_SHIFT)); - register_code(autoshift_lastkey); - autoshift_flags.lastshifted = true; -# if defined(AUTO_SHIFT_REPEAT) && !defined(AUTO_SHIFT_NO_AUTO_REPEAT) - if (matrix_trigger) { - // Prevents release. - return; - } + // clang-format off + autoshift_flags.lastshifted = + autoshift_flags.lastshifted + || TIMER_DIFF_16(now, autoshift_time) >= +# ifdef AUTO_SHIFT_TIMEOUT_PER_KEY + get_autoshift_timeout(autoshift_lastkey, record) +# else + autoshift_timeout # endif + ; + // clang-format on + set_autoshift_shift_state(autoshift_lastkey, autoshift_flags.lastshifted); + if (get_mods() & MOD_BIT(KC_LSFT)) { + autoshift_flags.cancelling_lshift = true; + del_mods(MOD_BIT(KC_LSFT)); + } + if (get_mods() & MOD_BIT(KC_RSFT)) { + autoshift_flags.cancelling_rshift = true; + del_mods(MOD_BIT(KC_RSFT)); } + autoshift_press_user(autoshift_lastkey, autoshift_flags.lastshifted, record); + // clang-format off +# if (defined(AUTO_SHIFT_REPEAT) || defined(AUTO_SHIFT_REPEAT_PER_KEY)) && (!defined(AUTO_SHIFT_NO_AUTO_REPEAT) || defined(AUTO_SHIFT_NO_AUTO_REPEAT_PER_KEY)) + if (matrix_trigger +# ifdef AUTO_SHIFT_REPEAT_PER_KEY + && get_auto_shift_repeat(autoshift_lastkey, record) +# endif +# ifdef AUTO_SHIFT_NO_AUTO_REPEAT_PER_KEY + && !get_auto_shift_no_auto_repeat(autoshift_lastkey, record) +# endif + ) { + // Prevents release. + return; + } +# endif + // clang-format on # if TAP_CODE_DELAY > 0 wait_ms(TAP_CODE_DELAY); # endif - unregister_code(autoshift_lastkey); - del_weak_mods(MOD_BIT(KC_LEFT_SHIFT)); + + autoshift_release_user(autoshift_lastkey, autoshift_flags.lastshifted, record); + autoshift_flush_shift(); } else { // Release after keyrepeat. - unregister_code(keycode); + autoshift_release_user(keycode, get_autoshift_shift_state(keycode), record); if (keycode == autoshift_lastkey) { // This will only fire when the key was the last auto-shiftable - // pressed. That prevents aaaaBBBB then releasing a from unshifting - // later Bs (if B wasn't auto-shiftable). - del_weak_mods(MOD_BIT(KC_LEFT_SHIFT)); + // pressed. That prevents 'aaaaBBBB' then releasing a from unshifting + // later 'B's (if 'B' wasn't auto-shiftable). + autoshift_flush_shift(); } } - send_keyboard_report(); // del_weak_mods doesn't send one. // Roll the autoshift_time forward for detecting tap-and-hold. autoshift_time = now; } @@ -147,24 +293,29 @@ static void autoshift_end(uint16_t keycode, uint16_t now, bool matrix_trigger) { */ void autoshift_matrix_scan(void) { if (autoshift_flags.in_progress) { - const uint16_t now = timer_read(); - const uint16_t elapsed = TIMER_DIFF_16(now, autoshift_time); - if (elapsed >= autoshift_timeout) { - autoshift_end(autoshift_lastkey, now, true); + const uint16_t now = timer_read(); + if (TIMER_DIFF_16(now, autoshift_time) >= +# ifdef AUTO_SHIFT_TIMEOUT_PER_KEY + get_autoshift_timeout(autoshift_lastkey, &autoshift_lastrecord) +# else + autoshift_timeout +# endif + ) { + autoshift_end(autoshift_lastkey, now, true, &autoshift_lastrecord); } } } void autoshift_toggle(void) { autoshift_flags.enabled = !autoshift_flags.enabled; - del_weak_mods(MOD_BIT(KC_LEFT_SHIFT)); + autoshift_flush_shift(); } void autoshift_enable(void) { autoshift_flags.enabled = true; } void autoshift_disable(void) { autoshift_flags.enabled = false; - del_weak_mods(MOD_BIT(KC_LEFT_SHIFT)); + autoshift_flush_shift(); } # ifndef AUTO_SHIFT_NO_SETUP @@ -179,76 +330,158 @@ void autoshift_timer_report(void) { bool get_autoshift_state(void) { return autoshift_flags.enabled; } -uint16_t get_autoshift_timeout(void) { return autoshift_timeout; } +uint16_t get_generic_autoshift_timeout() { return autoshift_timeout; } +__attribute__((weak)) uint16_t get_autoshift_timeout(uint16_t keycode, keyrecord_t *record) { return autoshift_timeout; } void set_autoshift_timeout(uint16_t timeout) { autoshift_timeout = timeout; } bool process_auto_shift(uint16_t keycode, keyrecord_t *record) { // Note that record->event.time isn't reliable, see: // https://github.com/qmk/qmk_firmware/pull/9826#issuecomment-733559550 - const uint16_t now = timer_read(); + // clang-format off + const uint16_t now = +# if !defined(RETRO_SHIFT) || defined(NO_ACTION_TAPPING) + timer_read() +# else + (record->event.pressed) ? retroshift_time : timer_read() +# endif + ; + // clang-format on if (record->event.pressed) { if (autoshift_flags.in_progress) { - // Evaluate previous key if there is one. Doing this elsewhere is - // more complicated and easier to break. - autoshift_end(KC_NO, now, false); + // Evaluate previous key if there is one. + autoshift_end(KC_NO, now, false, &autoshift_lastrecord); } - // For pressing another key while keyrepeating shifted autoshift. - del_weak_mods(MOD_BIT(KC_LEFT_SHIFT)); switch (keycode) { case KC_ASTG: autoshift_toggle(); - return true; + break; case KC_ASON: autoshift_enable(); - return true; + break; case KC_ASOFF: autoshift_disable(); - return true; + break; # ifndef AUTO_SHIFT_NO_SETUP case KC_ASUP: autoshift_timeout += 5; - return true; + break; case KC_ASDN: autoshift_timeout -= 5; - return true; - + break; case KC_ASRP: autoshift_timer_report(); - return true; + break; +# endif + } + // If Retro Shift is disabled, possible custom actions shouldn't happen. + // clang-format off + if (IS_RETRO(keycode) +# if defined(RETRO_SHIFT) && !defined(NO_ACTION_TAPPING) + // Not tapped or #defines mean that rolls should use hold action. + && ( + record->tap.count == 0 +# ifdef RETRO_TAPPING_PER_KEY + || !get_retro_tapping(keycode, record) +# endif + || (record->tap.interrupted && (IS_LT(keycode) +# if defined(HOLD_ON_OTHER_KEY_PRESS) || defined(HOLD_ON_OTHER_KEY_PRESS_PER_KEY) +# ifdef HOLD_ON_OTHER_KEY_PRESS_PER_KEY + ? get_hold_on_other_key_press(keycode, record) +# else + ? true +# endif +# else + ? false +# endif +# if defined(IGNORE_MOD_TAP_INTERRUPT) || defined(IGNORE_MOD_TAP_INTERRUPT_PER_KEY) +# ifdef IGNORE_MOD_TAP_INTERRUPT_PER_KEY + : !get_ignore_mod_tap_interrupt(keycode, record) +# else + : false +# endif +# else + : true +# endif + )) + ) +# endif + ) { + // clang-format on + autoshift_lastkey = KC_NO; + return true; + } + } else { + if (keycode == KC_LSFT) { + autoshift_flags.cancelling_lshift = false; + } else if (keycode == KC_RSFT) { + autoshift_flags.cancelling_rshift = false; + } + // Same as above (for pressed), additional checks are not needed because + // tap.count gets set to 0 in process_action + // clang-format off + else if (IS_RETRO(keycode) +# if defined(RETRO_SHIFT) && !defined(NO_ACTION_TAPPING) + && ( + record->tap.count == 0 +# ifdef RETRO_TAPPING_PER_KEY + || !get_retro_tapping(keycode, record) +# endif + ) # endif + ) { + // Fixes modifiers not being applied to rolls with AUTO_SHIFT_MODIFIERS set. +# if !defined(IGNORE_MOD_TAP_INTERRUPT) || defined(IGNORE_MOD_TAP_INTERRUPT_PER_KEY) + if (autoshift_flags.in_progress +# ifdef IGNORE_MOD_TAP_INTERRUPT_PER_KEY + && !get_ignore_mod_tap_interrupt(keycode, record) +# endif + ) { + autoshift_end(KC_NO, now, false, &autoshift_lastrecord); + } +# endif + // clang-format on + return true; } } + + if (!autoshift_flags.enabled) { + return true; + } if (get_auto_shifted_key(keycode, record)) { if (record->event.pressed) { return autoshift_press(keycode, now, record); } else { - autoshift_end(keycode, now, false); + autoshift_end(keycode, now, false, record); return false; } } + + // Prevent keyrepeating of older keys upon non-AS key event. + // Not commented at above returns but they serve the same function. + if (record->event.pressed) { + autoshift_lastkey = KC_NO; + } return true; } -__attribute__((weak)) bool get_auto_shifted_key(uint16_t keycode, keyrecord_t *record) { - switch (keycode) { -# ifndef NO_AUTO_SHIFT_ALPHA - case KC_A ... KC_Z: -# endif -# ifndef NO_AUTO_SHIFT_NUMERIC - case KC_1 ... KC_0: -# endif -# ifndef NO_AUTO_SHIFT_SPECIAL - case KC_TAB: - case KC_MINUS ... KC_SLASH: - case KC_NONUS_BACKSLASH: -# endif - return true; +# if defined(RETRO_SHIFT) && !defined(NO_ACTION_TAPPING) +// Called to record time before possible delays by action_tapping_process. +void retroshift_poll_time(keyevent_t *event) { + last_retroshift_time = retroshift_time; + retroshift_time = timer_read(); +} +// Used to swap the times of Retro Shifted key and Auto Shift key that interrupted it. +void retroshift_swap_times() { + if (last_retroshift_time != 0 && autoshift_flags.in_progress) { + uint16_t temp = retroshift_time; + retroshift_time = last_retroshift_time; + last_retroshift_time = temp; } - return false; } +# endif #endif diff --git a/quantum/process_keycode/process_auto_shift.h b/quantum/process_keycode/process_auto_shift.h index 00a9ab036f..ac6a143746 100644 --- a/quantum/process_keycode/process_auto_shift.h +++ b/quantum/process_keycode/process_auto_shift.h @@ -22,13 +22,31 @@ # define AUTO_SHIFT_TIMEOUT 175 #endif +#define IS_LT(kc) ((kc) >= QK_LAYER_TAP && (kc) <= QK_LAYER_TAP_MAX) +#define IS_MT(kc) ((kc) >= QK_MOD_TAP && (kc) <= QK_MOD_TAP_MAX) +#define IS_RETRO(kc) (IS_MT(kc) || IS_LT(kc)) +#define DO_GET_AUTOSHIFT_TIMEOUT(keycode, record, ...) record +// clang-format off +#define AUTO_SHIFT_ALPHA KC_A ... KC_Z +#define AUTO_SHIFT_NUMERIC KC_1 ... KC_0 +#define AUTO_SHIFT_SPECIAL \ + KC_TAB: \ + case KC_MINUS ... KC_SLASH: \ + case KC_NONUS_BSLASH +// clang-format on + bool process_auto_shift(uint16_t keycode, keyrecord_t *record); +void retroshift_poll_time(keyevent_t *event); +void retroshift_swap_times(void); void autoshift_enable(void); void autoshift_disable(void); void autoshift_toggle(void); bool get_autoshift_state(void); -uint16_t get_autoshift_timeout(void); +uint16_t get_generic_autoshift_timeout(void); +// clang-format off +uint16_t (get_autoshift_timeout)(uint16_t keycode, keyrecord_t *record); void set_autoshift_timeout(uint16_t timeout); void autoshift_matrix_scan(void); -bool get_auto_shifted_key(uint16_t keycode, keyrecord_t *record); +bool get_custom_auto_shifted_key(uint16_t keycode, keyrecord_t *record); +// clang-format on From 3d0062071133ad76504ede49a66063115c4a06c5 Mon Sep 17 00:00:00 2001 From: Jordan Banasik <woovie@woovie.net> Date: Thu, 25 Nov 2021 08:55:46 -0800 Subject: [PATCH 578/595] Add ifndef to WS2812 timing constraints (#14678) * Add ifndef to WS2812 timing constraints Due to the way that the PrimeKB Meridian PCB was designed, this change is needed in order to properly adjust the LEDs. Testing: * Compiled primekb/meridian:default successfully * Compiled random board (walletburner/neuron:default) successfully * Fix linting errors Missed some spacing * More linting fixes Spacing on the comments... really? * Rename WS2812 timing parameters for clarity; add comments * Add docs update for the WS2812 timing macros * Fix typo on comment * Add ifndef for WS2812_RES * Update double backticks and table with parameters * Move timing adjustments documentation to ws2812_drivers * Move timings adjustment discussion to bitbang section * Update T0H and T1H definitions in subtractions * format Co-authored-by: Gondolindrim <alvaro.volpato@usp.br> Co-authored-by: zvecr <git@zvecr.com> --- docs/ws2812_driver.md | 17 +++++++++++++ platforms/chibios/drivers/ws2812.c | 41 +++++++++++++++++++++--------- 2 files changed, 46 insertions(+), 12 deletions(-) diff --git a/docs/ws2812_driver.md b/docs/ws2812_driver.md index 101798f211..03dc4f2fd1 100644 --- a/docs/ws2812_driver.md +++ b/docs/ws2812_driver.md @@ -62,6 +62,23 @@ Configure the hardware via your config.h: #define WS2812_TIMEOUT 100 // default: 100 ``` +##### Adjusting bit timings (ChibiOS only) + +The WS2812 LED communication topology depends on a serialized timed window, lasting typically 1250ns in total, where a bit is interpreted as either 0 or 1 depending on for how much time the `RGB_DI` pin voltage is kept high and how much time it is kept low. The WS2812 datasheet specifies quantities defined as `T0H`, `T0L`, `T1H`, `T1L` (respectively, typically 350ns, 900ns, 900ns and 350ns); a bit is interpreted as zero if the voltage on the control pin is held high for `T0H` and then `T0L`, and the bit is interpreted as one if the voltage is held high for `T1H` and then low for `T1L`. Additionally, there is also a RESET time parameter whereby an LED color is reset if the voltage control pin is kept low for more than that parameter; in WS2812 that amount is 6000 nanoseconds. + +The WS2812 "bit-banged" ChibiOS driver does just that, in a simple way. It defines these values and governs the `RGB_DI` pin according to these times. There are, however, other LED parts that work in a communication topology similar to this but with different timing parameters; such is the case, for instance, of the SK6812. In order to better support such LEDs whilst keeping the WS2812 driver applicable, QMK allows you to tune these parameters through the definition macros: + +| Macro |Default | +|---------------------|--------------------------------------------| +|`WS2812_TIMING |`1250` | +|`WS2812_T0H` |`350` | +|`WS2812_T0L` |`WS2812_TIMING - WS2812_T0H` | +|`WS2812_T1H` |`900` | +|`WS2812_T1L` |`WS2812_TIMING - WS2812_T1L` | +|`WS2812_RES` |`6000` | + +It must be noted, however, that this tuning is only available for the ARM family of microprocessors (since it's ChibiOS-dependent) and not available for PWM and SPI drivers -- so if you intend to use this be aware it will only work with the "bit-banged" driver which is knowingly slower and can possibly throttle the microcontroller if too many LEDs are used. + ### SPI Targeting STM32 boards where WS2812 support is offloaded to an SPI hardware device. The advantage is that the use of DMA offloads processing of the WS2812 protocol from the MCU. `RGB_DI_PIN` for this driver is the configured SPI MOSI pin. Due to the nature of repurposing SPI to drive the LEDs, the other SPI pins, MISO and SCK, **must** remain unused. To configure it, add this to your rules.mk: diff --git a/platforms/chibios/drivers/ws2812.c b/platforms/chibios/drivers/ws2812.c index b46c46ae57..8c882c8eeb 100644 --- a/platforms/chibios/drivers/ws2812.c +++ b/platforms/chibios/drivers/ws2812.c @@ -40,18 +40,35 @@ } \ } while (0) -// These are the timing constraints taken mostly from the WS2812 datasheets -// These are chosen to be conservative and avoid problems rather than for maximum throughput +/* The WS2812 datasheets define T1H 900ns, T0H 350ns, T1L 350ns, T0L 900ns. Hence, by default, these are chosen to be conservative and avoid problems rather than for maximum throughput; in the code, this is done by default using a WS2812_TIMING parameter that accounts for the whole window (1250ns) and defining T1H and T0H; T1L and T0L are obtained by subtracting their low counterparts from the window. +However, there are certain "WS2812"-like LEDs, like the SK6812s, which work in a similar communication topology but use different timings for the window and the T1L, T1H, T0L and T0H. This means that, albeit the same driver being applicable, the timings must be adapted. The following defines are done such that the adjustment of these timings can be done in the keyboard's config.h; if nothing is said, the defines default to the WS2812 ones. +*/ -#define T1H 900 // Width of a 1 bit in ns -#define T1L (1250 - T1H) // Width of a 1 bit in ns +#ifndef WS2812_TIMING +# define WS2812_TIMING 1250 +#endif -#define T0H 350 // Width of a 0 bit in ns -#define T0L (1250 - T0H) // Width of a 0 bit in ns +#ifndef WS2812_T1H +# define WS2812_T1H 900 // Width of a 1 bit in ns +#endif + +#ifndef WS2812_T1L +# define WS2812_T1L (WS2812_TIMING - WS2812_T1H) // Width of a 1 bit in ns +#endif + +#ifndef WS2812_T0H +# define WS2812_T0H 350 // Width of a 0 bit in ns +#endif + +#ifndef WS2812_T0L +# define WS2812_T0L (WS2812_TIMING - WS2812_T0H) // Width of a 0 bit in ns +#endif // The reset gap can be 6000 ns, but depending on the LED strip it may have to be increased // to values like 600000 ns. If it is too small, the pixels will show nothing most of the time. -#define RES (1000 * WS2812_TRST_US) // Width of the low gap between bits to cause a frame to latch +#ifndef WS2812_RES +# define WS2812_RES (1000 * WS2812_TRST_US) // Width of the low gap between bits to cause a frame to latch +#endif void sendByte(uint8_t byte) { // WS2812 protocol wants most significant bits first @@ -61,15 +78,15 @@ void sendByte(uint8_t byte) { if (is_one) { // 1 writePinHigh(RGB_DI_PIN); - wait_ns(T1H); + wait_ns(WS2812_T1H); writePinLow(RGB_DI_PIN); - wait_ns(T1L); + wait_ns(WS2812_T1L); } else { // 0 writePinHigh(RGB_DI_PIN); - wait_ns(T0H); + wait_ns(WS2812_T0H); writePinLow(RGB_DI_PIN); - wait_ns(T0L); + wait_ns(WS2812_T0L); } } } @@ -108,7 +125,7 @@ void ws2812_setleds(LED_TYPE *ledarray, uint16_t leds) { #endif } - wait_ns(RES); + wait_ns(WS2812_RES); chSysUnlock(); } From 5e9c29da0df045b03ada9278c34f37b22349a6f7 Mon Sep 17 00:00:00 2001 From: Joel Challis <git@zvecr.com> Date: Thu, 25 Nov 2021 19:35:06 +0000 Subject: [PATCH 579/595] Tidy up adjustable ws2812 timing (#15299) --- docs/ws2812_driver.md | 30 ++++++++++----------- drivers/ws2812.h | 32 ++++++++++++++++++++++- platforms/avr/drivers/ws2812.c | 11 +++----- platforms/chibios/drivers/ws2812.c | 36 +++++--------------------- platforms/chibios/drivers/ws2812_pwm.c | 2 +- platforms/chibios/drivers/ws2812_spi.c | 2 +- 6 files changed, 55 insertions(+), 58 deletions(-) diff --git a/docs/ws2812_driver.md b/docs/ws2812_driver.md index 03dc4f2fd1..289535aa9e 100644 --- a/docs/ws2812_driver.md +++ b/docs/ws2812_driver.md @@ -49,6 +49,19 @@ WS2812_DRIVER = bitbang !> This driver is not hardware accelerated and may not be performant on heavily loaded systems. +#### Adjusting bit timings + +The WS2812 LED communication topology depends on a serialized timed window. Different versions of the addressable LEDs have differing requirements for the timing parameters, for instance, of the SK6812. +You can tune these parameters through the definition of the following macros: + +| Macro |Default | AVR | ARM | +|---------------------|--------------------------------------------|--------------------|--------------------| +|`WS2812_TIMING |`1250` | :heavy_check_mark: | :heavy_check_mark: | +|`WS2812_T0H` |`350` | :heavy_check_mark: | :heavy_check_mark: | +|`WS2812_T0L` |`WS2812_TIMING - WS2812_T0H` | | :heavy_check_mark: | +|`WS2812_T1H` |`900` | :heavy_check_mark: | :heavy_check_mark: | +|`WS2812_T1L` |`WS2812_TIMING - WS2812_T1L` | | :heavy_check_mark: | + ### I2C Targeting boards where WS2812 support is offloaded to a 2nd MCU. Currently the driver is limited to AVR given the known consumers are ps2avrGB/BMC. To configure it, add this to your rules.mk: @@ -62,23 +75,6 @@ Configure the hardware via your config.h: #define WS2812_TIMEOUT 100 // default: 100 ``` -##### Adjusting bit timings (ChibiOS only) - -The WS2812 LED communication topology depends on a serialized timed window, lasting typically 1250ns in total, where a bit is interpreted as either 0 or 1 depending on for how much time the `RGB_DI` pin voltage is kept high and how much time it is kept low. The WS2812 datasheet specifies quantities defined as `T0H`, `T0L`, `T1H`, `T1L` (respectively, typically 350ns, 900ns, 900ns and 350ns); a bit is interpreted as zero if the voltage on the control pin is held high for `T0H` and then `T0L`, and the bit is interpreted as one if the voltage is held high for `T1H` and then low for `T1L`. Additionally, there is also a RESET time parameter whereby an LED color is reset if the voltage control pin is kept low for more than that parameter; in WS2812 that amount is 6000 nanoseconds. - -The WS2812 "bit-banged" ChibiOS driver does just that, in a simple way. It defines these values and governs the `RGB_DI` pin according to these times. There are, however, other LED parts that work in a communication topology similar to this but with different timing parameters; such is the case, for instance, of the SK6812. In order to better support such LEDs whilst keeping the WS2812 driver applicable, QMK allows you to tune these parameters through the definition macros: - -| Macro |Default | -|---------------------|--------------------------------------------| -|`WS2812_TIMING |`1250` | -|`WS2812_T0H` |`350` | -|`WS2812_T0L` |`WS2812_TIMING - WS2812_T0H` | -|`WS2812_T1H` |`900` | -|`WS2812_T1L` |`WS2812_TIMING - WS2812_T1L` | -|`WS2812_RES` |`6000` | - -It must be noted, however, that this tuning is only available for the ARM family of microprocessors (since it's ChibiOS-dependent) and not available for PWM and SPI drivers -- so if you intend to use this be aware it will only work with the "bit-banged" driver which is knowingly slower and can possibly throttle the microcontroller if too many LEDs are used. - ### SPI Targeting STM32 boards where WS2812 support is offloaded to an SPI hardware device. The advantage is that the use of DMA offloads processing of the WS2812 protocol from the MCU. `RGB_DI_PIN` for this driver is the configured SPI MOSI pin. Due to the nature of repurposing SPI to drive the LEDs, the other SPI pins, MISO and SCK, **must** remain unused. To configure it, add this to your rules.mk: diff --git a/drivers/ws2812.h b/drivers/ws2812.h index f179fcb0ef..945b3d0728 100644 --- a/drivers/ws2812.h +++ b/drivers/ws2812.h @@ -17,11 +17,41 @@ #include "quantum/color.h" +/* + * The WS2812 datasheets define T1H 900ns, T0H 350ns, T1L 350ns, T0L 900ns. Hence, by default, these + * are chosen to be conservative and avoid problems rather than for maximum throughput; in the code, + * this is done by default using a WS2812_TIMING parameter that accounts for the whole window (1250ns) + * and defining T1H and T0H; T1L and T0L are obtained by subtracting their low counterparts from the window. + * + * However, there are certain "WS2812"-like LEDs, like the SK6812s, which work in a similar + * communication topology but use different timings for the window and the T1L, T1H, T0L and T0H. + * This means that, albeit the same driver being applicable, the timings must be adapted. + */ + +#ifndef WS2812_TIMING +# define WS2812_TIMING 1250 +#endif + +#ifndef WS2812_T1H +# define WS2812_T1H 900 // Width of a 1 bit in ns +#endif + +#ifndef WS2812_T1L +# define WS2812_T1L (WS2812_TIMING - WS2812_T1H) // Width of a 1 bit in ns +#endif + +#ifndef WS2812_T0H +# define WS2812_T0H 350 // Width of a 0 bit in ns +#endif + +#ifndef WS2812_T0L +# define WS2812_T0L (WS2812_TIMING - WS2812_T0H) // Width of a 0 bit in ns +#endif + /* * Older WS2812s can handle a reset time (TRST) of 50us, but recent * component revisions require a minimum of 280us. */ - #if !defined(WS2812_TRST_US) # define WS2812_TRST_US 280 #endif diff --git a/platforms/avr/drivers/ws2812.c b/platforms/avr/drivers/ws2812.c index 77c492cd4c..9150b3c520 100644 --- a/platforms/avr/drivers/ws2812.c +++ b/platforms/avr/drivers/ws2812.c @@ -52,20 +52,15 @@ void ws2812_setleds(LED_TYPE *ledarray, uint16_t number_of_leds) { using the fast 800kHz clockless WS2811/2812 protocol. */ -// Timing in ns -#define w_zeropulse 350 -#define w_onepulse 900 -#define w_totalperiod 1250 - // Fixed cycles used by the inner loop #define w_fixedlow 2 #define w_fixedhigh 4 #define w_fixedtotal 8 // Insert NOPs to match the timing, if possible -#define w_zerocycles (((F_CPU / 1000) * w_zeropulse) / 1000000) -#define w_onecycles (((F_CPU / 1000) * w_onepulse + 500000) / 1000000) -#define w_totalcycles (((F_CPU / 1000) * w_totalperiod + 500000) / 1000000) +#define w_zerocycles (((F_CPU / 1000) * WS2812_T0H) / 1000000) +#define w_onecycles (((F_CPU / 1000) * WS2812_T1H + 500000) / 1000000) +#define w_totalcycles (((F_CPU / 1000) * WS2812_TIMING + 500000) / 1000000) // w1_nops - nops between rising edge and falling edge - low #if w_zerocycles >= w_fixedlow diff --git a/platforms/chibios/drivers/ws2812.c b/platforms/chibios/drivers/ws2812.c index 8c882c8eeb..7e870661de 100644 --- a/platforms/chibios/drivers/ws2812.c +++ b/platforms/chibios/drivers/ws2812.c @@ -22,6 +22,12 @@ # define WS2812_OUTPUT_MODE PAL_MODE_OUTPUT_OPENDRAIN #endif +// The reset gap can be 6000 ns, but depending on the LED strip it may have to be increased +// to values like 600000 ns. If it is too small, the pixels will show nothing most of the time. +#ifndef WS2812_RES +# define WS2812_RES (1000 * WS2812_TRST_US) // Width of the low gap between bits to cause a frame to latch +#endif + #define NUMBER_NOPS 6 #define CYCLES_PER_SEC (CPU_CLOCK / NUMBER_NOPS * NOP_FUDGE) #define NS_PER_SEC (1000000000L) // Note that this has to be SIGNED since we want to be able to check for negative values of derivatives @@ -40,36 +46,6 @@ } \ } while (0) -/* The WS2812 datasheets define T1H 900ns, T0H 350ns, T1L 350ns, T0L 900ns. Hence, by default, these are chosen to be conservative and avoid problems rather than for maximum throughput; in the code, this is done by default using a WS2812_TIMING parameter that accounts for the whole window (1250ns) and defining T1H and T0H; T1L and T0L are obtained by subtracting their low counterparts from the window. -However, there are certain "WS2812"-like LEDs, like the SK6812s, which work in a similar communication topology but use different timings for the window and the T1L, T1H, T0L and T0H. This means that, albeit the same driver being applicable, the timings must be adapted. The following defines are done such that the adjustment of these timings can be done in the keyboard's config.h; if nothing is said, the defines default to the WS2812 ones. -*/ - -#ifndef WS2812_TIMING -# define WS2812_TIMING 1250 -#endif - -#ifndef WS2812_T1H -# define WS2812_T1H 900 // Width of a 1 bit in ns -#endif - -#ifndef WS2812_T1L -# define WS2812_T1L (WS2812_TIMING - WS2812_T1H) // Width of a 1 bit in ns -#endif - -#ifndef WS2812_T0H -# define WS2812_T0H 350 // Width of a 0 bit in ns -#endif - -#ifndef WS2812_T0L -# define WS2812_T0L (WS2812_TIMING - WS2812_T0H) // Width of a 0 bit in ns -#endif - -// The reset gap can be 6000 ns, but depending on the LED strip it may have to be increased -// to values like 600000 ns. If it is too small, the pixels will show nothing most of the time. -#ifndef WS2812_RES -# define WS2812_RES (1000 * WS2812_TRST_US) // Width of the low gap between bits to cause a frame to latch -#endif - void sendByte(uint8_t byte) { // WS2812 protocol wants most significant bits first for (unsigned char bit = 0; bit < 8; bit++) { diff --git a/platforms/chibios/drivers/ws2812_pwm.c b/platforms/chibios/drivers/ws2812_pwm.c index c17b9cd4e5..19ea3cfe8a 100644 --- a/platforms/chibios/drivers/ws2812_pwm.c +++ b/platforms/chibios/drivers/ws2812_pwm.c @@ -71,7 +71,7 @@ * Calculate the number of zeroes to add at the end assuming 1.25 uS/bit: */ #define WS2812_COLOR_BITS (WS2812_CHANNELS * 8) -#define WS2812_RESET_BIT_N (1000 * WS2812_TRST_US / 1250) +#define WS2812_RESET_BIT_N (1000 * WS2812_TRST_US / WS2812_TIMING) #define WS2812_COLOR_BIT_N (RGBLED_NUM * WS2812_COLOR_BITS) /**< Number of data bits */ #define WS2812_BIT_N (WS2812_COLOR_BIT_N + WS2812_RESET_BIT_N) /**< Total number of bits in a frame */ diff --git a/platforms/chibios/drivers/ws2812_spi.c b/platforms/chibios/drivers/ws2812_spi.c index 62722f466e..ba471e0b8e 100644 --- a/platforms/chibios/drivers/ws2812_spi.c +++ b/platforms/chibios/drivers/ws2812_spi.c @@ -77,7 +77,7 @@ #endif #define BYTES_FOR_LED (BYTES_FOR_LED_BYTE * WS2812_CHANNELS) #define DATA_SIZE (BYTES_FOR_LED * RGBLED_NUM) -#define RESET_SIZE (1000 * WS2812_TRST_US / (2 * 1250)) +#define RESET_SIZE (1000 * WS2812_TRST_US / (2 * WS2812_TIMING)) #define PREAMBLE_SIZE 4 static uint8_t txbuf[PREAMBLE_SIZE + DATA_SIZE + RESET_SIZE] = {0}; From 4bac5f53d864a77a6f0fa8a2a046ed7748824ecc Mon Sep 17 00:00:00 2001 From: precondition <57645186+precondition@users.noreply.github.com> Date: Thu, 25 Nov 2021 20:06:50 +0000 Subject: [PATCH 580/595] New feature: `DYNAMIC_TAPPING_TERM_ENABLE` (#11036) * New feature: `DYNAMIC_TAPPING_TERM_ENABLE` 3 new quantum keys to configure the tapping term on the fly. * Replace sprintf call in tapping_term_report by get_u16_str * Replace tab with 4 spaces --- builddefs/generic_features.mk | 1 + builddefs/show_options.mk | 1 + docs/config_options.md | 2 + docs/keycodes.md | 10 +++ docs/tap_hold.md | 80 ++++++++++++++++++- docs/understanding_qmk.md | 1 + quantum/action_tapping.c | 8 +- quantum/action_tapping.h | 4 + .../process_dynamic_tapping_term.c | 50 ++++++++++++ .../process_dynamic_tapping_term.h | 26 ++++++ quantum/quantum.c | 3 + quantum/quantum.h | 4 + quantum/quantum_keycodes.h | 5 ++ 13 files changed, 191 insertions(+), 4 deletions(-) create mode 100644 quantum/process_keycode/process_dynamic_tapping_term.c create mode 100644 quantum/process_keycode/process_dynamic_tapping_term.h diff --git a/builddefs/generic_features.mk b/builddefs/generic_features.mk index e41ce6ac91..e4151eb217 100644 --- a/builddefs/generic_features.mk +++ b/builddefs/generic_features.mk @@ -36,6 +36,7 @@ GENERIC_FEATURES = \ TAP_DANCE \ VELOCIKEY \ WPM \ + DYNAMIC_TAPPING_TERM \ define HANDLE_GENERIC_FEATURE # $$(info "Processing: $1_ENABLE $2.c") diff --git a/builddefs/show_options.mk b/builddefs/show_options.mk index ee60597e1c..2820332d56 100644 --- a/builddefs/show_options.mk +++ b/builddefs/show_options.mk @@ -39,6 +39,7 @@ OTHER_OPTION_NAMES = \ UNICODE_COMMON \ AUTO_SHIFT_ENABLE \ AUTO_SHIFT_MODIFIERS \ + DYNAMIC_TAPPING_TERM_ENABLE \ COMBO_ENABLE \ KEY_LOCK_ENABLE \ KEY_OVERRIDE_ENABLE \ diff --git a/docs/config_options.md b/docs/config_options.md index 9f2453b698..b661b55ee0 100644 --- a/docs/config_options.md +++ b/docs/config_options.md @@ -448,6 +448,8 @@ Use these to enable or disable building certain features. The more you have enab * Disables usb suspend check after keyboard startup. Usually the keyboard waits for the host to wake it up before any tasks are performed. This is useful for split keyboards as one half will not get a wakeup call but must send commands to the master. * `DEFERRED_EXEC_ENABLE` * Enables deferred executor support -- timed delays before callbacks are invoked. See [deferred execution](custom_quantum_functions.md#deferred-execution) for more information. +* `DYNAMIC_TAPPING_TERM_ENABLE` + * Allows to configure the global tapping term on the fly. ## USB Endpoint Limitations diff --git a/docs/keycodes.md b/docs/keycodes.md index 926d4fdcef..ba06e1b8b6 100644 --- a/docs/keycodes.md +++ b/docs/keycodes.md @@ -586,6 +586,16 @@ See also: [Mod-Tap](mod_tap.md) |`MEH_T(kc)` | |Left Control, Shift and Alt when held, `kc` when tapped | |`HYPR_T(kc)` |`ALL_T(kc)` |Left Control, Shift, Alt and GUI when held, `kc` when tapped - more info [here](https://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/)| +## Tapping Term Keys :id=tapping-term-keys + +See also: [Dynamic Tapping Term](tap_hold#dynamic-tapping-term) + +| Key | Description | +|-------------|------------------------------------------------------------------------------------------------------------------------| +| `DT_PRNT` | "Dynamic Tapping Term Print": Types the current tapping term, in milliseconds | +| `DT_UP` | "Dynamic Tapping Term Up": Increases the current tapping term by `DYNAMIC_TAPPING_TERM_INCREMENT`ms (5ms by default) | +| `DT_DOWN` | "Dynamic Tapping Term Down": Decreases the current tapping term by `DYNAMIC_TAPPING_TERM_INCREMENT`ms (5ms by default) | + ## RGB Lighting :id=rgb-lighting See also: [RGB Lighting](feature_rgblight.md) diff --git a/docs/tap_hold.md b/docs/tap_hold.md index a343d0bc3e..d206c10cc5 100644 --- a/docs/tap_hold.md +++ b/docs/tap_hold.md @@ -6,7 +6,9 @@ These options let you modify the behavior of the Tap-Hold keys. ## Tapping Term -The crux of all of the following features is the tapping term setting. This determines what is a tap and what is a hold. And the exact timing for this to feel natural can vary from keyboard to keyboard, from switch to switch, and from key to key. +The crux of all of the following features is the tapping term setting. This determines what is a tap and what is a hold. The exact timing for this to feel natural can vary from keyboard to keyboard, from switch to switch, and from key to key. + +?> `DYNAMIC_TAPPING_TERM_ENABLE` enables three special keys that can help you quickly find a comfortable tapping term for you. See "Dynamic Tapping Term" for more details. You can set the global time for this by adding the following setting to your `config.h`: @@ -36,6 +38,82 @@ uint16_t get_tapping_term(uint16_t keycode, keyrecord_t *record) { } ``` +### Dynamic Tapping Term :id=dynamic-tapping-term + +`DYNAMIC_TAPPING_TERM_ENABLE` is a feature you can enable in `rules.mk` that lets you use three special keys in your keymap to configure the tapping term on the fly. + +| Key | Description | +|-------------|------------------------------------------------------------------------------------------------------------------------| +| `DT_PRNT` | "Dynamic Tapping Term Print": Types the current tapping term, in milliseconds | +| `DT_UP` | "Dynamic Tapping Term Up": Increases the current tapping term by `DYNAMIC_TAPPING_TERM_INCREMENT`ms (5ms by default) | +| `DT_DOWN` | "Dynamic Tapping Term Down": Decreases the current tapping term by `DYNAMIC_TAPPING_TERM_INCREMENT`ms (5ms by default) | + +Set the tapping term as usual with `#define TAPPING_TERM <value>` in `config.h` and add `DYNAMIC_TAPPING_TERM_ENABLE = yes` in `rules.mk`. Then, place the above three keys somewhere in your keymap and flash the new firmware onto your board. + +Now, you can try using your dual-role keys, such as layer-taps and mod-taps, and use `DT_DOWN` and `DT_UP` to adjust the tapping term immediately. If you find that you frequently trigger the modifier of your mod-tap(s) by accident for example, that's a sign that your tapping term may be too low so tap `DT_UP` a few times to increase the tapping term until that no longer happens. On the flip side, if you get superfluous characters when you actually intended to momentarily activate a layer, tap `DT_DOWN` to lower the tapping term. Do note that these keys affect the *global* tapping term, you cannot change the tapping term of a specific key on the fly. + +Once you're satisfied with the current tapping term value, open `config.h` and replace whatever value you first wrote for the tapping term by the output of the `DT_PRNT` key. + +It's important to update `TAPPING_TERM` with the new value because the adjustments made using `DT_UP` and `DT_DOWN` are not persistent. + +The value by which the tapping term increases or decreases when you tap `DT_UP` and `DT_DOWN` can be configured in `config.h` with `#define DYNAMIC_TAPPING_TERM_INCREMENT <new value>`. Note that the tapping term is *not* modified when holding down the tap term keys so if you need to, for example, decrease the current tapping term by 50ms, you cannot just press down and hold `DT_DOWN`; you will have to tap it 10 times in a row with the default increment of 5ms. + +If you need more flexibility, nothing prevents you from defining your own custom keys to dynamically change the tapping term. + +```c +enum custom_dynamic_tapping_term_keys = { + DT_UP_50 = SAFE_RANGE, + DT_DOWN_50, + DT_UP_X2, + DT_DOWN_X2, +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case DT_UP_50: + if (record->event.pressed) { + g_tapping_term += 50; + } + break; + case DT_DOWN_50: + if (record->event.pressed) { + g_tapping_term -= 50; + } + break; + case DT_UP_X2: + if (record->event.pressed) { + g_tapping_term *= 2; + } + break; + case DT_DOWN_X2: + if (record->event.pressed) { + g_tapping_term /= 2; + } + break; + } + return true; +}; +``` + +In order for this feature to be effective if you use per-key tapping terms, you need to make a few changes to the syntax of the `get_tapping_term` function. All you need to do is replace every occurrence of `TAPPING_TERM` in the `get_tapping_term` function by lowercase `g_tapping_term`. If you don't do that, you will still see the value typed by `DT_PRNT` go up and down as you configure the tapping term on the fly but you won't feel those changes as they don't get applied. If you can go as low as 10ms and still easily trigger the tap function of a dual-role key, that's a sign that you forgot to make the necessary changes to your `get_tapping_term` function. + +For instance, here's how the example `get_tapping_term` shown earlier should look like after the transformation: + +```c +uint16_t get_tapping_term(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case SFT_T(KC_SPC): + return g_tapping_term + 1250; + case LT(1, KC_GRV): + return 130; + default: + return g_tapping_term; + } +} +``` + +The reason being that `TAPPING_TERM` is a macro that expands to a constant integer and thus cannot be changed at runtime whereas `g_tapping_term` is a variable whose value can be changed at runtime. If you want, you can temporarily enable `DYNAMIC_TAPPING_TERM_ENABLE` to find a suitable tapping term value and then disable that feature and revert back to using the classic syntax for per-key tapping term settings. + ## Tap-Or-Hold Decision Modes The code which decides between the tap and hold actions of dual-role keys supports three different modes, in increasing order of preference for the hold action: diff --git a/docs/understanding_qmk.md b/docs/understanding_qmk.md index e0c2ab7dc3..016e3d9fd2 100644 --- a/docs/understanding_qmk.md +++ b/docs/understanding_qmk.md @@ -157,6 +157,7 @@ The `process_record()` function itself is deceptively simple, but hidden within * [`bool process_combo(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_combo.c#L115) * [`bool process_printer(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_printer.c#L77) * [`bool process_auto_shift(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_auto_shift.c#L94) + * `bool process_dynamic_tapping_term(uint16_t keycode, keyrecord_t *record)` * [`bool process_terminal(uint16_t keycode, keyrecord_t *record)`](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/process_keycode/process_terminal.c#L264) * [Identify and process Quantum-specific keycodes](https://github.com/qmk/qmk_firmware/blob/e1203a222bb12ab9733916164a000ef3ac48da93/quantum/quantum.c#L291) diff --git a/quantum/action_tapping.c b/quantum/action_tapping.c index 0586fad421..b64d8b710b 100644 --- a/quantum/action_tapping.c +++ b/quantum/action_tapping.c @@ -24,12 +24,14 @@ # define IS_TAPPING_RECORD(r) (IS_TAPPING() && KEYEQ(tapping_key.event.key, (r->event.key)) && tapping_key.keycode == r->keycode) # endif -__attribute__((weak)) uint16_t get_tapping_term(uint16_t keycode, keyrecord_t *record) { return TAPPING_TERM; } +uint16_t g_tapping_term = TAPPING_TERM; + +__attribute__((weak)) uint16_t get_tapping_term(uint16_t keycode, keyrecord_t *record) { return g_tapping_term; } # ifdef TAPPING_TERM_PER_KEY # define WITHIN_TAPPING_TERM(e) (TIMER_DIFF_16(e.time, tapping_key.event.time) < get_tapping_term(get_record_keycode(&tapping_key, false), &tapping_key)) # else -# define WITHIN_TAPPING_TERM(e) (TIMER_DIFF_16(e.time, tapping_key.event.time) < TAPPING_TERM) +# define WITHIN_TAPPING_TERM(e) (TIMER_DIFF_16(e.time, tapping_key.event.time) < g_tapping_term) # endif # ifdef TAPPING_FORCE_HOLD_PER_KEY @@ -158,7 +160,7 @@ bool process_tapping(keyrecord_t *keyp) { # ifdef TAPPING_TERM_PER_KEY get_tapping_term(tapping_keycode, keyp) # else - TAPPING_TERM + g_tapping_term # endif >= 500 ) diff --git a/quantum/action_tapping.h b/quantum/action_tapping.h index 7de8049c7f..b2feb6850c 100644 --- a/quantum/action_tapping.h +++ b/quantum/action_tapping.h @@ -33,10 +33,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>. uint16_t get_record_keycode(keyrecord_t *record, bool update_layer_cache); uint16_t get_event_keycode(keyevent_t event, bool update_layer_cache); void action_tapping_process(keyrecord_t record); +#endif uint16_t get_tapping_term(uint16_t keycode, keyrecord_t *record); bool get_permissive_hold(uint16_t keycode, keyrecord_t *record); bool get_ignore_mod_tap_interrupt(uint16_t keycode, keyrecord_t *record); bool get_tapping_force_hold(uint16_t keycode, keyrecord_t *record); bool get_retro_tapping(uint16_t keycode, keyrecord_t *record); + +#ifdef DYNAMIC_TAPPING_TERM_ENABLE +extern uint16_t g_tapping_term; #endif diff --git a/quantum/process_keycode/process_dynamic_tapping_term.c b/quantum/process_keycode/process_dynamic_tapping_term.c new file mode 100644 index 0000000000..bdc5529e33 --- /dev/null +++ b/quantum/process_keycode/process_dynamic_tapping_term.c @@ -0,0 +1,50 @@ +/* Copyright 2020 Vladislav Kucheriavykh + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "quantum.h" +#include "process_dynamic_tapping_term.h" + +#ifndef DYNAMIC_TAPPING_TERM_INCREMENT +# define DYNAMIC_TAPPING_TERM_INCREMENT 5 +#endif + +static void tapping_term_report(void) { + const char *tapping_term_str = get_u16_str(g_tapping_term, ' '); + // Skip padding spaces + while (*tapping_term_str == ' ') { + tapping_term_str++; + } + send_string(tapping_term_str); +} + +bool process_dynamic_tapping_term(uint16_t keycode, keyrecord_t *record) { + if (record->event.pressed) { + switch (keycode) { + case DT_PRNT: + tapping_term_report(); + return false; + + case DT_UP: + g_tapping_term += DYNAMIC_TAPPING_TERM_INCREMENT; + return false; + + case DT_DOWN: + g_tapping_term -= DYNAMIC_TAPPING_TERM_INCREMENT; + return false; + } + } + return true; +} diff --git a/quantum/process_keycode/process_dynamic_tapping_term.h b/quantum/process_keycode/process_dynamic_tapping_term.h new file mode 100644 index 0000000000..85e83ee73b --- /dev/null +++ b/quantum/process_keycode/process_dynamic_tapping_term.h @@ -0,0 +1,26 @@ +/* Copyright 2020 Vladislav Kucheriavykh + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include <stdbool.h> +#include "action.h" + +#ifndef DYNAMIC_TAPPING_TERM_INCREMENT +# define DYNAMIC_TAPPING_TERM_INCREMENT 5 +#endif + +bool process_dynamic_tapping_term(uint16_t keycode, keyrecord_t *record); diff --git a/quantum/quantum.c b/quantum/quantum.c index ba3ae03457..35b6351e9d 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -275,6 +275,9 @@ bool process_record_quantum(keyrecord_t *record) { #ifdef AUTO_SHIFT_ENABLE process_auto_shift(keycode, record) && #endif +#ifdef DYNAMIC_TAPPING_TERM_ENABLE + process_dynamic_tapping_term(keycode, record) && +#endif #ifdef TERMINAL_ENABLE process_terminal(keycode, record) && #endif diff --git a/quantum/quantum.h b/quantum/quantum.h index 45050ac0ea..6927884e2f 100644 --- a/quantum/quantum.h +++ b/quantum/quantum.h @@ -125,6 +125,10 @@ extern layer_state_t layer_state; # include "process_auto_shift.h" #endif +#ifdef DYNAMIC_TAPPING_TERM_ENABLE +# include "process_dynamic_tapping_term.h" +#endif + #ifdef COMBO_ENABLE # include "process_combo.h" #endif diff --git a/quantum/quantum_keycodes.h b/quantum/quantum_keycodes.h index d013a6a169..e4d0167aac 100644 --- a/quantum/quantum_keycodes.h +++ b/quantum/quantum_keycodes.h @@ -524,6 +524,11 @@ enum quantum_keycodes { // Additional magic key MAGIC_TOGGLE_GUI, + // Adjust tapping term on the fly + DT_PRNT, + DT_UP, + DT_DOWN, + // Programmable Button PROGRAMMABLE_BUTTON_1, PROGRAMMABLE_BUTTON_2, From f889e26ed7def6efd122089b99beb38746587827 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=C3=81lvaro=20A=2E=20Volpato?= <alvaro.volpato@usp.br> Date: Thu, 25 Nov 2021 17:13:16 -0300 Subject: [PATCH 581/595] Documentation typo fix (#15298) * Fix WS2812 driver docs typo --- docs/ws2812_driver.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/docs/ws2812_driver.md b/docs/ws2812_driver.md index 289535aa9e..8acac0b3aa 100644 --- a/docs/ws2812_driver.md +++ b/docs/ws2812_driver.md @@ -56,11 +56,11 @@ You can tune these parameters through the definition of the following macros: | Macro |Default | AVR | ARM | |---------------------|--------------------------------------------|--------------------|--------------------| -|`WS2812_TIMING |`1250` | :heavy_check_mark: | :heavy_check_mark: | +|`WS2812_TIMING` |`1250` | :heavy_check_mark: | :heavy_check_mark: | |`WS2812_T0H` |`350` | :heavy_check_mark: | :heavy_check_mark: | |`WS2812_T0L` |`WS2812_TIMING - WS2812_T0H` | | :heavy_check_mark: | |`WS2812_T1H` |`900` | :heavy_check_mark: | :heavy_check_mark: | -|`WS2812_T1L` |`WS2812_TIMING - WS2812_T1L` | | :heavy_check_mark: | +|`WS2812_T1L` |`WS2812_TIMING - WS2812_T1H` | | :heavy_check_mark: | ### I2C Targeting boards where WS2812 support is offloaded to a 2nd MCU. Currently the driver is limited to AVR given the known consumers are ps2avrGB/BMC. To configure it, add this to your rules.mk: From 27086ad80faf30c64a8121234543a916dcdb9823 Mon Sep 17 00:00:00 2001 From: Nick Brassel <nick@tzarc.org> Date: Fri, 26 Nov 2021 07:53:48 +1100 Subject: [PATCH 582/595] More headroom. (#15301) --- keyboards/dztech/dz60rgb_ansi/v2_1/config.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/keyboards/dztech/dz60rgb_ansi/v2_1/config.h b/keyboards/dztech/dz60rgb_ansi/v2_1/config.h index 7d943f037f..84aa7802c3 100644 --- a/keyboards/dztech/dz60rgb_ansi/v2_1/config.h +++ b/keyboards/dztech/dz60rgb_ansi/v2_1/config.h @@ -54,7 +54,7 @@ #ifdef RGB_MATRIX_ENABLE # define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended -# define RGB_MATRIX_KEYPRESSES +// # define RGB_MATRIX_KEYPRESSES # define RGB_MATRIX_FRAMEBUFFER_EFFECTS // RGB Matrix Animation modes. Explicitly enabled // For full list of effects, see: @@ -92,8 +92,8 @@ # define ENABLE_RGB_MATRIX_TYPING_HEATMAP # define ENABLE_RGB_MATRIX_DIGITAL_RAIN // enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE // # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE // # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE // # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS From 08b7f8b30a61a59ed52dba5d0b306ebaeb627095 Mon Sep 17 00:00:00 2001 From: Nick Brassel <nick@tzarc.org> Date: Fri, 26 Nov 2021 08:11:18 +1100 Subject: [PATCH 583/595] More headroom. (#15302) --- keyboards/xbows/nature/config.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/keyboards/xbows/nature/config.h b/keyboards/xbows/nature/config.h index 6858c6a072..922e479a50 100644 --- a/keyboards/xbows/nature/config.h +++ b/keyboards/xbows/nature/config.h @@ -39,7 +39,7 @@ # define RGB_MATRIX_LED_FLUSH_LIMIT 16 # define RGB_DISABLE_AFTER_TIMEOUT 0 // number of ticks to wait until disabling effects # define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended -# define RGB_MATRIX_KEYPRESSES +// # define RGB_MATRIX_KEYPRESSES # define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200 # define RGB_MATRIX_CENTER \ { 92, 33 } @@ -82,8 +82,8 @@ # define ENABLE_RGB_MATRIX_TYPING_HEATMAP // # define ENABLE_RGB_MATRIX_DIGITAL_RAIN // enabled only of RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE -# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +// # define ENABLE_RGB_MATRIX_SOLID_REACTIVE // # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE // # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE // # define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS From b04f66f2452494206673323c9495ea6a56c0cb06 Mon Sep 17 00:00:00 2001 From: Nick Brassel <nick@tzarc.org> Date: Sat, 27 Nov 2021 09:11:03 +1100 Subject: [PATCH 584/595] Add script for performing compilation size regression investigations. (#15303) * Add script for performing compilation size regression investigations. * Print deltas * Correct scoping. * Concurrency control * Job count control, skip zeros (unless no build output), fix usage. * Add usage under -h arg. * Updated usage output. * Copyright header. --- util/size_regression.sh | 79 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 79 insertions(+) create mode 100755 util/size_regression.sh diff --git a/util/size_regression.sh b/util/size_regression.sh new file mode 100755 index 0000000000..988d1d9b5b --- /dev/null +++ b/util/size_regression.sh @@ -0,0 +1,79 @@ +#!/bin/bash + +# Copyright 2021 Nick Brassel (@tzarc) +# SPDX-License-Identifier: GPL-2.0-or-later + +set -eEuo pipefail + +job_count=$(getconf _NPROCESSORS_ONLN 2>/dev/null || sysctl -n hw.ncpu 2>/dev/null || echo 2) +source_ref="0.11.0" +dest_ref="develop" +ignore_ref="master" +unset skip_zero + +function usage() { + echo "Usage: $(basename "$0") [-h] [-j <jobs>] [-s <source>] [-d <dest>] [-n] planck/rev6:default" + echo " -h : Shows this usage page." + echo " -j <threads> : Change the number of threads to execute with. Defaults to \`$job_count\`." + echo " -s <source> : Use source commit, branch, tag, or sha1 to start the search. Defaults to \`$source_ref\`." + echo " -d <dest> : Use destination commit, branch, tag, or sha1 to end the search. Defaults to \`$dest_ref\`." + echo " -i <ignore> : The branch to ignore refs from. Defaults to \`$ignore_ref\`." + echo " -n : Skips printing changes if the delta is zero." + exit 1 +} + +if [[ ${#} -eq 0 ]]; then + usage +fi + +while getopts "hj:s:d:i:n" opt "$@" ; do + case "$opt" in + h) usage; exit 0;; + j) job_count="${OPTARG:-}";; + s) source_ref="${OPTARG:-}";; + d) dest_ref="${OPTARG:-}";; + i) ignore_ref="${OPTARG:-}";; + n) skip_zero=1;; + \?) usage >&2; exit 1;; + esac +done + +# Work out the target board +shift $((OPTIND-1)) +keyboard_target=$1 + +last_size=0 +last_line="" +function build_executor() { + git rev-list --oneline --no-merges ${source_ref}...${dest_ref} ^${ignore_ref} | while IFS= read -r line ; do + revision=$(echo $line | cut -d' ' -f1) + + make distclean >/dev/null 2>&1 + git checkout $revision >/dev/null 2>&1 || { echo "Failed to check out revision ${revision}" >&2 ; exit 1 ; } + make -j${job_count} $keyboard_target >/dev/null 2>&1 || true + file_size=$(arm-none-eabi-size .build/*.elf 2>/dev/null | awk '/elf/ {print $1}' 2>/dev/null || true) + + if [[ "$last_size" == 0 ]] ; then last_size=$file_size ; fi + if [[ -z "$file_size" ]] ; then file_size=0 ; fi + + if [[ -n "$last_line" ]] ; then + size_delta=$(( $last_size - $file_size )) + if { [[ -n "${skip_zero:-}" ]] && [[ $size_delta -ne 0 ]] ; } || [[ $file_size -eq 0 ]] ; then + printf "Size: %8d, delta: %+6d -- %s\n" "$last_size" "$size_delta" "$last_line" + fi + fi + + last_size=$file_size + last_line=$line + done + + if [ -n "$last_line" ] ; then + size_delta=0 + printf "Size: %8d, delta: %+6d -- %s\n" "$last_size" "$size_delta" "$last_line" + fi +} + +# The actual execution of all the builds needs to be the last command in the entire script +# - During builds, this script file will disappear, so we need the entire script to be +# loaded into the script interpreter at the time of execution. Do not refactor. +build_executor From 68838bb700413144c6fdaf680f3d412b8231b584 Mon Sep 17 00:00:00 2001 From: Joy Lee <chang.li@westberrytech.com> Date: Sat, 27 Nov 2021 06:28:18 +0800 Subject: [PATCH 585/595] Westberrytech pr (#14422) * Added support for WB32 MCU * Modified eeprom_wb32.c * Remove the eeprom_wb32-related code --- builddefs/mcu_selection.mk | 31 +- data/schemas/keyboard.jsonschema | 4 +- docs/compatible_microcontrollers.md | 4 + lib/python/qmk/constants.py | 2 +- lib/python/qmk/info.py | 2 + .../boards/GENERIC_WB32_F3G71XX/board/board.c | 82 ++ .../boards/GENERIC_WB32_F3G71XX/board/board.h | 56 ++ .../GENERIC_WB32_F3G71XX/board/board.mk | 9 + .../configs/bootloader_defs.h | 12 + .../GENERIC_WB32_F3G71XX/configs/chconf.h | 757 ++++++++++++++++++ .../GENERIC_WB32_F3G71XX/configs/config.h | 20 + .../GENERIC_WB32_F3G71XX/configs/halconf.h | 532 ++++++++++++ .../GENERIC_WB32_F3G71XX/configs/mcuconf.h | 168 ++++ platforms/chibios/chibios_config.h | 12 + platforms/chibios/drivers/i2c_master.c | 3 + platforms/chibios/drivers/spi_master.c | 33 + platforms/chibios/drivers/uart.c | 4 + platforms/chibios/drivers/uart.h | 16 + platforms/chibios/flash.mk | 16 + platforms/chibios/platform.mk | 4 + 20 files changed, 1763 insertions(+), 4 deletions(-) create mode 100644 platforms/chibios/boards/GENERIC_WB32_F3G71XX/board/board.c create mode 100644 platforms/chibios/boards/GENERIC_WB32_F3G71XX/board/board.h create mode 100644 platforms/chibios/boards/GENERIC_WB32_F3G71XX/board/board.mk create mode 100644 platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/bootloader_defs.h create mode 100644 platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/chconf.h create mode 100644 platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/config.h create mode 100644 platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/halconf.h create mode 100644 platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/mcuconf.h diff --git a/builddefs/mcu_selection.mk b/builddefs/mcu_selection.mk index 1251b7a2b7..46d34aabe4 100644 --- a/builddefs/mcu_selection.mk +++ b/builddefs/mcu_selection.mk @@ -540,10 +540,39 @@ ifneq (,$(filter $(MCU),STM32L412 STM32L422)) UF2_FAMILY ?= STM32L4 endif +ifneq ($(findstring WB32F3G71, $(MCU)),) + # Cortex version + MCU = cortex-m3 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 7 + + ## chip/board settings + # - the next two should match the directories in + # <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = WB32 + MCU_SERIES = WB32F3G71xx + + # Linker script to use + # - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/ + # or <keyboard_dir>/ld/ + MCU_LDSCRIPT ?= WB32F3G71x9 + + # Startup code to use + # - it should exist in <chibios>/os/common/startup/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP ?= wb32f3g71xx + + # Board: it should exist either in <chibios>/os/hal/boards/, + # <keyboard_dir>/boards/, or drivers/boards/ + BOARD ?= GENERIC_WB32_F3G71XX + + USE_FPU ?= no +endif + ifneq ($(findstring GD32VF103, $(MCU)),) # RISC-V MCU = risc-v - + # RISC-V extensions and abi configuration MCU_ARCH = rv32imac MCU_ABI = ilp32 diff --git a/data/schemas/keyboard.jsonschema b/data/schemas/keyboard.jsonschema index 37a0643ab2..308f9b782b 100644 --- a/data/schemas/keyboard.jsonschema +++ b/data/schemas/keyboard.jsonschema @@ -13,7 +13,7 @@ }, "processor": { "type": "string", - "enum": ["cortex-m0", "cortex-m0plus", "cortex-m3", "cortex-m4", "MKL26Z64", "MK20DX128", "MK20DX256", "MK66FX1M0", "STM32F042", "STM32F072", "STM32F103", "STM32F303", "STM32F401", "STM32F405", "STM32F407", "STM32F411", "STM32F446", "STM32G431", "STM32G474", "STM32L412", "STM32L422", "STM32L433", "STM32L443", "GD32VF103", "atmega16u2", "atmega32u2", "atmega16u4", "atmega32u4", "at90usb162", "at90usb646", "at90usb647", "at90usb1286", "at90usb1287", "atmega32a", "atmega328p", "atmega328", "attiny85", "unknown"] + "enum": ["cortex-m0", "cortex-m0plus", "cortex-m3", "cortex-m4", "MKL26Z64", "MK20DX128", "MK20DX256", "MK66FX1M0", "STM32F042", "STM32F072", "STM32F103", "STM32F303", "STM32F401", "STM32F405", "STM32F407", "STM32F411", "STM32F446", "STM32G431", "STM32G474", "STM32L412", "STM32L422", "STM32L433", "STM32L443", "GD32VF103", "WB32F3G71", "atmega16u2", "atmega32u2", "atmega16u4", "atmega32u4", "at90usb162", "at90usb646", "at90usb647", "at90usb1286", "at90usb1287", "atmega32a", "atmega328p", "atmega328", "attiny85", "unknown"] }, "audio": { "type": "object", @@ -57,7 +57,7 @@ }, "bootloader": { "type": "string", - "enum": ["atmel-dfu", "bootloadhid", "bootloadHID", "caterina", "halfkay", "kiibohd", "lufa-dfu", "lufa-ms", "micronucleus", "qmk-dfu", "qmk-hid", "stm32-dfu", "stm32duino", "gd32v-dfu", "unknown", "usbasploader", "USBasp", "tinyuf2"], + "enum": ["atmel-dfu", "bootloadhid", "bootloadHID", "caterina", "halfkay", "kiibohd", "lufa-dfu", "lufa-ms", "micronucleus", "qmk-dfu", "qmk-hid", "stm32-dfu", "stm32duino", "gd32v-dfu", "wb32-dfu", "unknown", "usbasploader", "USBasp", "tinyuf2"], }, "bootloader_instructions": { "type": "string", diff --git a/docs/compatible_microcontrollers.md b/docs/compatible_microcontrollers.md index 39e9061c20..eb3e2c3e57 100644 --- a/docs/compatible_microcontrollers.md +++ b/docs/compatible_microcontrollers.md @@ -37,6 +37,10 @@ You can also use any ARM chip with USB that [ChibiOS](https://www.chibios.org) s * [STM32L422](https://www.st.com/en/microcontrollers-microprocessors/stm32l4x2.html) * [STM32L433](https://www.st.com/en/microcontrollers-microprocessors/stm32l4x3.html) * [STM32L443](https://www.st.com/en/microcontrollers-microprocessors/stm32l4x3.html) + + ### WestBerryTech (WB32) + + * [WB32F3G71xx](http://www.westberrytech.com) ### NXP (Kinetis) diff --git a/lib/python/qmk/constants.py b/lib/python/qmk/constants.py index 73f596ba2c..754091a97e 100644 --- a/lib/python/qmk/constants.py +++ b/lib/python/qmk/constants.py @@ -13,7 +13,7 @@ QMK_FIRMWARE_UPSTREAM = 'qmk/qmk_firmware' MAX_KEYBOARD_SUBFOLDERS = 5 # Supported processor types -CHIBIOS_PROCESSORS = 'cortex-m0', 'cortex-m0plus', 'cortex-m3', 'cortex-m4', 'MKL26Z64', 'MK20DX128', 'MK20DX256', 'MK66FX1M0', 'STM32F042', 'STM32F072', 'STM32F103', 'STM32F303', 'STM32F401', 'STM32F407', 'STM32F411', 'STM32F446', 'STM32G431', 'STM32G474', 'STM32L412', 'STM32L422', 'STM32L433', 'STM32L443', 'GD32VF103' +CHIBIOS_PROCESSORS = 'cortex-m0', 'cortex-m0plus', 'cortex-m3', 'cortex-m4', 'MKL26Z64', 'MK20DX128', 'MK20DX256', 'MK66FX1M0', 'STM32F042', 'STM32F072', 'STM32F103', 'STM32F303', 'STM32F401', 'STM32F407', 'STM32F411', 'STM32F446', 'STM32G431', 'STM32G474', 'STM32L412', 'STM32L422', 'STM32L433', 'STM32L443', 'GD32VF103', 'WB32F3G71' LUFA_PROCESSORS = 'at90usb162', 'atmega16u2', 'atmega32u2', 'atmega16u4', 'atmega32u4', 'at90usb646', 'at90usb647', 'at90usb1286', 'at90usb1287', None VUSB_PROCESSORS = 'atmega32a', 'atmega328p', 'atmega328', 'attiny85' diff --git a/lib/python/qmk/info.py b/lib/python/qmk/info.py index dc42fdd4d9..9a07fc842f 100644 --- a/lib/python/qmk/info.py +++ b/lib/python/qmk/info.py @@ -624,6 +624,8 @@ def arm_processor_rules(info_data, rules): if 'bootloader' not in info_data: if 'STM32' in info_data['processor']: info_data['bootloader'] = 'stm32-dfu' + elif 'WB32' in info_data['processor']: + info_data['bootloader'] = 'wb32-dfu' else: info_data['bootloader'] = 'unknown' diff --git a/platforms/chibios/boards/GENERIC_WB32_F3G71XX/board/board.c b/platforms/chibios/boards/GENERIC_WB32_F3G71XX/board/board.c new file mode 100644 index 0000000000..e38a7e0054 --- /dev/null +++ b/platforms/chibios/boards/GENERIC_WB32_F3G71XX/board/board.c @@ -0,0 +1,82 @@ +/* + Copyright (C) 2021 Westberry Technology (ChangZhou) Corp., Ltd + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * This file has been automatically generated using ChibiStudio board + * generator plugin. Do not edit manually. + */ + +#include "hal.h" + +/*===========================================================================*/ +/* Driver local definitions. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver exported variables. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver local variables and types. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver local functions. */ +/*===========================================================================*/ + +static void wb32_gpio_init(void) { + +#if WB32_HAS_GPIOA + rccEnableAPB1(RCC_APB1ENR_GPIOAEN); +#endif + +#if WB32_HAS_GPIOB + rccEnableAPB1(RCC_APB1ENR_GPIOBEN); +#endif + +#if WB32_HAS_GPIOC + rccEnableAPB1(RCC_APB1ENR_GPIOCEN); +#endif + +#if WB32_HAS_GPIOD + rccEnableAPB1(RCC_APB1ENR_GPIODEN); +#endif +} + +/*===========================================================================*/ +/* Driver interrupt handlers. */ +/*===========================================================================*/ + +/*===========================================================================*/ +/* Driver exported functions. */ +/*===========================================================================*/ +/* + * Early initialization code. + * This initialization must be performed just after stack setup and before + * any other initialization. + */ +void __early_init(void) { + + wb32_clock_init(); + wb32_gpio_init(); +} +/** + * @brief Board-specific initialization code. + * @note You can add your board-specific code here. + */ +void boardInit(void) { + +} diff --git a/platforms/chibios/boards/GENERIC_WB32_F3G71XX/board/board.h b/platforms/chibios/boards/GENERIC_WB32_F3G71XX/board/board.h new file mode 100644 index 0000000000..51dc84db94 --- /dev/null +++ b/platforms/chibios/boards/GENERIC_WB32_F3G71XX/board/board.h @@ -0,0 +1,56 @@ +#pragma once +/* + Copyright (C) 2021 Westberry Technology (ChangZhou) Corp., Ltd + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/* + * This file has been automatically generated using ChibiStudio board + * generator plugin. Do not edit manually. + */ + +#ifndef BOARD_H +#define BOARD_H + +/*===========================================================================*/ +/* Driver constants. */ +/*===========================================================================*/ + +/* + * Setup board. + */ + +/* + * Board identifier. + */ +#define WB32F3G71x9 +#if !defined(WB32F3G71xx) + #define WB32F3G71xx +#endif + +/*===========================================================================*/ +/* External declarations. */ +/*===========================================================================*/ + +#if !defined(_FROM_ASM_) +#ifdef __cplusplus +extern "C" { +#endif + void boardInit(void); +#ifdef __cplusplus +} +#endif +#endif /* _FROM_ASM_ */ + +#endif /* BOARD_H */ diff --git a/platforms/chibios/boards/GENERIC_WB32_F3G71XX/board/board.mk b/platforms/chibios/boards/GENERIC_WB32_F3G71XX/board/board.mk new file mode 100644 index 0000000000..842e335905 --- /dev/null +++ b/platforms/chibios/boards/GENERIC_WB32_F3G71XX/board/board.mk @@ -0,0 +1,9 @@ +# List of all the board related files. +BOARDSRC = $(BOARD_PATH)/board/board.c + +# Required include directories +BOARDINC = $(BOARD_PATH)/board + +# Shared variables +ALLCSRC += $(BOARDSRC) +ALLINC += $(BOARDINC) diff --git a/platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/bootloader_defs.h b/platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/bootloader_defs.h new file mode 100644 index 0000000000..c929d2ad03 --- /dev/null +++ b/platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/bootloader_defs.h @@ -0,0 +1,12 @@ +/* Address for jumping to bootloader on WB32 chips. */ +/* It is chip dependent, the correct number can be looked up here: + * http://www.westberrytech.com/down/mcu/data/WB32F3G71xx_rm.pdf + */ +#ifndef WB32_BOOTLOADER_ADDRESS +# undef STM32_BOOTLOADER_ADDRESS +# define WB32_BOOTLOADER_ADDRESS 0x1FFFE000 +# define STM32_BOOTLOADER_ADDRESS WB32_BOOTLOADER_ADDRESS +#else +# undef STM32_BOOTLOADER_ADDRESS +# define STM32_BOOTLOADER_ADDRESS WB32_BOOTLOADER_ADDRESS +#endif diff --git a/platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/chconf.h b/platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/chconf.h new file mode 100644 index 0000000000..1b8bd5d84a --- /dev/null +++ b/platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/chconf.h @@ -0,0 +1,757 @@ +/* + Copyright (C) 2021 Westberry Technology (ChangZhou) Corp., Ltd + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file rt/templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H + +#define _CHIBIOS_RT_CONF_ +#define _CHIBIOS_RT_CONF_VER_6_1_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_ST_RESOLUTION) +#define CH_CFG_ST_RESOLUTION 32 +#endif + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#if !defined(CH_CFG_ST_FREQUENCY) +#define CH_CFG_ST_FREQUENCY 10000 +#endif + +/** + * @brief Time intervals data size. + * @note Allowed values are 16, 32 or 64 bits. + */ +#if !defined(CH_CFG_INTERVALS_SIZE) +#define CH_CFG_INTERVALS_SIZE 32 +#endif + +/** + * @brief Time types data size. + * @note Allowed values are 16 or 32 bits. + */ +#if !defined(CH_CFG_TIME_TYPES_SIZE) +#define CH_CFG_TIME_TYPES_SIZE 32 +#endif + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#if !defined(CH_CFG_ST_TIMEDELTA) +#define CH_CFG_ST_TIMEDELTA 0 +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#if !defined(CH_CFG_TIME_QUANTUM) +#define CH_CFG_TIME_QUANTUM 0 +#endif + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#if !defined(CH_CFG_NO_IDLE_THREAD) +#define CH_CFG_NO_IDLE_THREAD FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_OPTIMIZE_SPEED) +#define CH_CFG_OPTIMIZE_SPEED TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_TM) +#define CH_CFG_USE_TM TRUE +#endif + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_REGISTRY) +#define CH_CFG_USE_REGISTRY TRUE +#endif + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_WAITEXIT) +#define CH_CFG_USE_WAITEXIT TRUE +#endif + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_SEMAPHORES) +#define CH_CFG_USE_SEMAPHORES TRUE +#endif + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE +#endif + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MUTEXES) +#define CH_CFG_USE_MUTEXES TRUE +#endif + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE +#endif + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#if !defined(CH_CFG_USE_CONDVARS) +#define CH_CFG_USE_CONDVARS TRUE +#endif + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE +#endif + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_EVENTS) +#define CH_CFG_USE_EVENTS TRUE +#endif + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE +#endif + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MESSAGES) +#define CH_CFG_USE_MESSAGES TRUE +#endif + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE +#endif + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#if !defined(CH_CFG_USE_DYNAMIC) +#define CH_CFG_USE_DYNAMIC TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name OSLIB options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#if !defined(CH_CFG_USE_MAILBOXES) +#define CH_CFG_USE_MAILBOXES TRUE +#endif + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MEMCORE) +#define CH_CFG_USE_MEMCORE TRUE +#endif + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#if !defined(CH_CFG_MEMCORE_SIZE) +#define CH_CFG_MEMCORE_SIZE 0 +#endif + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#if !defined(CH_CFG_USE_HEAP) +#define CH_CFG_USE_HEAP TRUE +#endif + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_MEMPOOLS) +#define CH_CFG_USE_MEMPOOLS TRUE +#endif + +/** + * @brief Objects FIFOs APIs. + * @details If enabled then the objects FIFOs APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_OBJ_FIFOS) +#define CH_CFG_USE_OBJ_FIFOS TRUE +#endif + +/** + * @brief Pipes APIs. + * @details If enabled then the pipes APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_PIPES) +#define CH_CFG_USE_PIPES TRUE +#endif + +/** + * @brief Objects Caches APIs. + * @details If enabled then the objects caches APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_OBJ_CACHES) +#define CH_CFG_USE_OBJ_CACHES TRUE +#endif + +/** + * @brief Delegate threads APIs. + * @details If enabled then the delegate threads APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_DELEGATES) +#define CH_CFG_USE_DELEGATES TRUE +#endif + +/** + * @brief Jobs Queues APIs. + * @details If enabled then the jobs queues APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#if !defined(CH_CFG_USE_JOBS) +#define CH_CFG_USE_JOBS TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Objects factory options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Objects Factory APIs. + * @details If enabled then the objects factory APIs are included in the + * kernel. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_CFG_USE_FACTORY) +#define CH_CFG_USE_FACTORY TRUE +#endif + +/** + * @brief Maximum length for object names. + * @details If the specified length is zero then the name is stored by + * pointer but this could have unintended side effects. + */ +#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) +#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 +#endif + +/** + * @brief Enables the registry of generic objects. + */ +#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) +#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE +#endif + +/** + * @brief Enables factory for generic buffers. + */ +#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) +#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE +#endif + +/** + * @brief Enables factory for semaphores. + */ +#if !defined(CH_CFG_FACTORY_SEMAPHORES) +#define CH_CFG_FACTORY_SEMAPHORES TRUE +#endif + +/** + * @brief Enables factory for mailboxes. + */ +#if !defined(CH_CFG_FACTORY_MAILBOXES) +#define CH_CFG_FACTORY_MAILBOXES TRUE +#endif + +/** + * @brief Enables factory for objects FIFOs. + */ +#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) +#define CH_CFG_FACTORY_OBJ_FIFOS TRUE +#endif + +/** + * @brief Enables factory for Pipes. + */ +#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) +#define CH_CFG_FACTORY_PIPES TRUE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_STATISTICS) +#define CH_DBG_STATISTICS FALSE +#endif + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_SYSTEM_STATE_CHECK) +#define CH_DBG_SYSTEM_STATE_CHECK FALSE +#endif + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_CHECKS) +#define CH_DBG_ENABLE_CHECKS TRUE +#endif + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_ENABLE_ASSERTS) +#define CH_DBG_ENABLE_ASSERTS FALSE +#endif + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the trace buffer is activated. + * + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_MASK) +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL +#endif + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#if !defined(CH_DBG_TRACE_BUFFER_SIZE) +#define CH_DBG_TRACE_BUFFER_SIZE 128 +#endif + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#if !defined(CH_DBG_ENABLE_STACK_CHECK) +#define CH_DBG_ENABLE_STACK_CHECK TRUE +#endif + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#if !defined(CH_DBG_FILL_THREADS) +#define CH_DBG_FILL_THREADS TRUE +#endif + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#if !defined(CH_DBG_THREADS_PROFILING) +#define CH_DBG_THREADS_PROFILING FALSE +#endif + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System structure extension. + * @details User fields added to the end of the @p ch_system_t structure. + */ +#define CH_CFG_SYSTEM_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief System initialization hook. + * @details User initialization code added to the @p chSysInit() function + * just before interrupts are enabled globally. + */ +#define CH_CFG_SYSTEM_INIT_HOOK() { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p _thread_init() function. + * + * @note It is invoked from within @p _thread_init() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* CHCONF_H */ + +/** @} */ diff --git a/platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/config.h b/platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/config.h new file mode 100644 index 0000000000..3d3e1165e4 --- /dev/null +++ b/platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/config.h @@ -0,0 +1,20 @@ +/* Copyright (C) 2021 Westberry Technology (ChangZhou) Corp., Ltd + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <https://www.gnu.org/licenses/>. + */ +#pragma once + +#ifndef EARLY_INIT_PERFORM_BOOTLOADER_JUMP +# define EARLY_INIT_PERFORM_BOOTLOADER_JUMP FALSE +#endif diff --git a/platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/halconf.h b/platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/halconf.h new file mode 100644 index 0000000000..ac6ec9eade --- /dev/null +++ b/platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/halconf.h @@ -0,0 +1,532 @@ +/* + Copyright (C) 2021 Westberry Technology (ChangZhou) Corp., Ltd + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef HALCONF_H +#define HALCONF_H + +#define _CHIBIOS_HAL_CONF_ +#define _CHIBIOS_HAL_CONF_VER_7_1_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the cryptographic subsystem. + */ +#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) +#define HAL_USE_CRY FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EFlash subsystem. + */ +#if !defined(HAL_USE_EFL) || defined(__DOXYGEN__) +#define HAL_USE_EFL FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SIO subsystem. + */ +#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) +#define HAL_USE_SIO FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the TRNG subsystem. + */ +#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) +#define HAL_USE_TRNG FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/** + * @brief Enables the WSPI subsystem. + */ +#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) +#define HAL_USE_WSPI FALSE +#endif + +/*===========================================================================*/ +/* PAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) +#define PAL_USE_CALLBACKS FALSE // additional : The original is FALSE +#endif + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) +#define PAL_USE_WAIT FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE FALSE +#endif + +/** + * @brief Enforces the driver to use direct callbacks rather than OSAL events. + */ +#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) +#define CAN_ENFORCE_USE_CALLBACKS FALSE +#endif + +/*===========================================================================*/ +/* CRY driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the SW fall-back of the cryptographic driver. + * @details When enabled, this option, activates a fall-back software + * implementation for algorithms not supported by the underlying + * hardware. + * @note Fall-back implementations may not be present for all algorithms. + */ +#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_USE_FALLBACK FALSE +#endif + +/** + * @brief Makes the driver forcibly use the fall-back implementations. + */ +#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) +#define HAL_CRY_ENFORCE_FALLBACK FALSE +#endif + +/*===========================================================================*/ +/* DAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) +#define DAC_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define DAC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the zero-copy API. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS FALSE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING FALSE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/** + * @brief OCR initialization constant for V20 cards. + */ +#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) +#define SDC_INIT_OCR_V20 0x50FF8000U +#endif + +/** + * @brief OCR initialization constant for non-V20 cards. + */ +#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) +#define SDC_INIT_OCR 0x80100000U +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 16 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 16 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 256 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/** + * @brief Serial over USB number of buffers. + * @note The default is 2 buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_NUMBER 2 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables circular transfers APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) +#define SPI_USE_CIRCULAR FALSE +#endif + + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/** + * @brief Handling method for SPI CS line. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) +#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD +#endif + +/*===========================================================================*/ +/* UART driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) +#define UART_USE_WAIT FALSE +#endif + +/** + * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define UART_USE_MUTUAL_EXCLUSION FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT TRUE +#endif + +/*===========================================================================*/ +/* WSPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) +#define WSPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define WSPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +#endif /* HALCONF_H */ + +/** @} */ diff --git a/platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/mcuconf.h b/platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/mcuconf.h new file mode 100644 index 0000000000..7c1fdaf57d --- /dev/null +++ b/platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/mcuconf.h @@ -0,0 +1,168 @@ +/* + Copyright (C) 2021 Westberry Technology (ChangZhou) Corp., Ltd + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef MCUCONF_H +#define MCUCONF_H + +#define WB32F3G71xx_MCUCONF TRUE + +/* + * WB32F3G71 drivers configuration. + * The following settings override the default settings present in + * the various device driver implementation headers. + * Note that the settings for each driver only have effect if the whole + * driver is enabled in halconf.h. + * + * IRQ priorities: + * 15...0 Lowest...Highest. + * + */ + +/** + * @name Internal clock sources + * @{ + */ +#define WB32_HSECLK 12000000 +#define WB32_LSECLK 32768 + +/* + * HAL driver system settings. + */ +#define WB32_NO_INIT FALSE +#define WB32_MHSI_ENABLED TRUE +#define WB32_FHSI_ENABLED FALSE +#define WB32_LSI_ENABLED FALSE +#define WB32_HSE_ENABLED TRUE +#define WB32_LSE_ENABLED FALSE +#define WB32_PLL_ENABLED TRUE +#define WB32_MAINCLKSRC WB32_MAINCLKSRC_PLL +#define WB32_PLLSRC WB32_PLLSRC_HSE +#define WB32_PLLDIV_VALUE 2 +#define WB32_PLLMUL_VALUE 12 //The allowed range is 12,16,20,24. +#define WB32_HPRE 1 +#define WB32_PPRE1 1 +#define WB32_PPRE2 1 +#define WB32_USBPRE WB32_USBPRE_DIV1P5 + +/* + * EXTI driver system settings. + */ +#define WB32_IRQ_EXTI0_PRIORITY 6 +#define WB32_IRQ_EXTI1_PRIORITY 6 +#define WB32_IRQ_EXTI2_PRIORITY 6 +#define WB32_IRQ_EXTI3_PRIORITY 6 +#define WB32_IRQ_EXTI4_PRIORITY 6 +#define WB32_IRQ_EXTI5_9_PRIORITY 6 +#define WB32_IRQ_EXTI10_15_PRIORITY 6 +#define WB32_IRQ_EXTI16_PRIORITY 6 +#define WB32_IRQ_EXTI17_PRIORITY 6 +#define WB32_IRQ_EXTI18_PRIORITY 6 +#define WB32_IRQ_EXTI19_PRIORITY 6 + +/* + * GPT driver system settings. + */ +#define WB32_TIM_MAX_CHANNELS 4 +#define WB32_GPT_USE_TIM1 FALSE +#define WB32_GPT_USE_TIM2 FALSE +#define WB32_GPT_USE_TIM3 FALSE +#define WB32_GPT_USE_TIM4 FALSE +#define WB32_GPT_TIM1_IRQ_PRIORITY 7 +#define WB32_GPT_TIM2_IRQ_PRIORITY 7 +#define WB32_GPT_TIM3_IRQ_PRIORITY 7 +#define WB32_GPT_TIM4_IRQ_PRIORITY 7 + +/* + * ICU driver system settings. + */ +#define WB32_ICU_USE_TIM1 FALSE +#define WB32_ICU_USE_TIM2 FALSE +#define WB32_ICU_USE_TIM3 FALSE +#define WB32_ICU_USE_TIM4 FALSE +#define WB32_ICU_TIM1_IRQ_PRIORITY 7 +#define WB32_ICU_TIM2_IRQ_PRIORITY 7 +#define WB32_ICU_TIM3_IRQ_PRIORITY 7 +#define WB32_ICU_TIM4_IRQ_PRIORITY 7 + +/* + * PWM driver system settings. + */ +#define WB32_PWM_USE_ADVANCED FALSE +#define WB32_PWM_USE_TIM1 FALSE +#define WB32_PWM_USE_TIM2 FALSE +#define WB32_PWM_USE_TIM3 FALSE +#define WB32_PWM_USE_TIM4 FALSE +#define WB32_PWM_TIM1_IRQ_PRIORITY 7 +#define WB32_PWM_TIM2_IRQ_PRIORITY 7 +#define WB32_PWM_TIM3_IRQ_PRIORITY 7 +#define WB32_PWM_TIM4_IRQ_PRIORITY 7 + +/* + * I2C driver system settings. + */ +#define WB32_I2C_USE_I2C1 FALSE +#define WB32_I2C_USE_I2C2 FALSE +#define WB32_I2C_BUSY_TIMEOUT 50 +#define WB32_I2C_I2C1_IRQ_PRIORITY 5 +#define WB32_I2C_I2C2_IRQ_PRIORITY 5 + +/* + * SERIAL driver system settings. + */ +#define WB32_SERIAL_USE_UART1 FALSE +#define WB32_SERIAL_USE_UART2 FALSE +#define WB32_SERIAL_USE_UART3 FALSE +#define WB32_SERIAL_USART1_PRIORITY 12 +#define WB32_SERIAL_USART2_PRIORITY 12 +#define WB32_SERIAL_USART3_PRIORITY 12 + +/* + * SPI driver system settings. + */ +#define WB32_SPI_USE_QSPI FALSE +#define WB32_SPI_USE_SPIM2 FALSE +#define WB32_SPI_USE_SPIS1 FALSE +#define WB32_SPI_USE_SPIS2 FALSE +#define WB32_SPI_QSPI_IRQ_PRIORITY 10 +#define WB32_SPI_SPIM2_IRQ_PRIORITY 10 +#define WB32_SPI_SPIS1_IRQ_PRIORITY 10 +#define WB32_SPI_SPIS2_IRQ_PRIORITY 10 + +/* + * ST driver system settings. + */ +#define WB32_ST_IRQ_PRIORITY 8 +#define WB32_ST_USE_TIMER 2 + +/* + * UART driver system settings. + */ +#define WB32_UART_USE_UART1 FALSE +#define WB32_UART_USE_UART2 FALSE +#define WB32_UART_USE_UART3 FALSE +#define WB32_UART_UART1_IRQ_PRIORITY 12 +#define WB32_UART_UART2_IRQ_PRIORITY 12 +#define WB32_UART_UART3_IRQ_PRIORITY 12 + +/* + * USB driver system settings. + */ +#define WB32_USB_USE_USB1 TRUE +#define WB32_USB_USB1_IRQ_PRIORITY 13 +#define WB32_USB_HOST_WAKEUP_DURATION 10 + + +#endif /* MCUCONF_H */ diff --git a/platforms/chibios/chibios_config.h b/platforms/chibios/chibios_config.h index ad2f808a95..4e35736606 100644 --- a/platforms/chibios/chibios_config.h +++ b/platforms/chibios/chibios_config.h @@ -51,6 +51,18 @@ # endif #endif +// WB32 compatibility +#if defined(MCU_WB32) +# define CPU_CLOCK WB32_MAINCLK + +# if defined(WB32F3G71xx) +# define PAL_OUTPUT_TYPE_OPENDRAIN PAL_WB32_OTYPE_OPENDRAIN +# define PAL_OUTPUT_TYPE_PUSHPULL PAL_WB32_OTYPE_PUSHPULL +# define PAL_OUTPUT_SPEED_HIGHEST PAL_WB32_OSPEED_HIGH +# define PAL_PUPDR_FLOATING PAL_WB32_PUPDR_FLOATING +# endif +#endif + #if defined(GD32VF103) /* This chip has the same API as STM32F103, but uses different names for literally the same thing. * As of 4.7.2021 QMK is tailored to use STM32 defines/names, for compatibility sake diff --git a/platforms/chibios/drivers/i2c_master.c b/platforms/chibios/drivers/i2c_master.c index 63e85ae87d..43591d56f8 100644 --- a/platforms/chibios/drivers/i2c_master.c +++ b/platforms/chibios/drivers/i2c_master.c @@ -38,6 +38,9 @@ static const I2CConfig i2cconfig = { I2C1_OPMODE, I2C1_CLOCK_SPEED, I2C1_DUTY_CYCLE, +#elif defined(WB32F3G71xx) + I2C1_OPMODE, + I2C1_CLOCK_SPEED, #else // This configures the I2C clock to 400khz assuming a 72Mhz clock // For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html diff --git a/platforms/chibios/drivers/spi_master.c b/platforms/chibios/drivers/spi_master.c index c592369dde..dde0bb0597 100644 --- a/platforms/chibios/drivers/spi_master.c +++ b/platforms/chibios/drivers/spi_master.c @@ -54,6 +54,7 @@ bool spi_start(pin_t slavePin, bool lsbFirst, uint8_t mode, uint16_t divisor) { return false; } +#ifndef WB32F3G71xx uint16_t roundedDivisor = 2; while (roundedDivisor < divisor) { roundedDivisor <<= 1; @@ -62,6 +63,7 @@ bool spi_start(pin_t slavePin, bool lsbFirst, uint8_t mode, uint16_t divisor) { if (roundedDivisor < 2 || roundedDivisor > 256) { return false; } +#endif #if defined(K20x) || defined(KL2x) spiConfig.tar0 = SPIx_CTARn_FMSZ(7) | SPIx_CTARn_ASC(1); @@ -135,6 +137,37 @@ bool spi_start(pin_t slavePin, bool lsbFirst, uint8_t mode, uint16_t divisor) { } spiConfig.cpr = (roundedDivisor - 1) >> 1; + +#elif defined(WB32F3G71xx) + if (!lsbFirst) { + osalDbgAssert(lsbFirst != FALSE, "unsupported lsbFirst"); + } + + if (divisor < 1) { + return false; + } + + spiConfig.SPI_BaudRatePrescaler = (divisor << 2); + + switch (mode) { + case 0: + spiConfig.SPI_CPHA = SPI_CPHA_1Edge; + spiConfig.SPI_CPOL = SPI_CPOL_Low; + break; + case 1: + spiConfig.SPI_CPHA = SPI_CPHA_2Edge; + spiConfig.SPI_CPOL = SPI_CPOL_Low; + break; + case 2: + spiConfig.SPI_CPHA = SPI_CPHA_1Edge; + spiConfig.SPI_CPOL = SPI_CPOL_High; + break; + case 3: + spiConfig.SPI_CPHA = SPI_CPHA_2Edge; + spiConfig.SPI_CPOL = SPI_CPOL_High; + break; + } + #else spiConfig.cr1 = 0; diff --git a/platforms/chibios/drivers/uart.c b/platforms/chibios/drivers/uart.c index 297c1892c3..d2ea5d6415 100644 --- a/platforms/chibios/drivers/uart.c +++ b/platforms/chibios/drivers/uart.c @@ -18,7 +18,11 @@ #include "quantum.h" +#if defined(WB32F3G71xx) +static SerialConfig serialConfig = {SERIAL_DEFAULT_BITRATE, SD1_WRDLEN, SD1_STPBIT, SD1_PARITY, SD1_ATFLCT}; +#else static SerialConfig serialConfig = {SERIAL_DEFAULT_BITRATE, SD1_CR1, SD1_CR2, SD1_CR3}; +#endif void uart_init(uint32_t baud) { static bool is_initialised = false; diff --git a/platforms/chibios/drivers/uart.h b/platforms/chibios/drivers/uart.h index 5bc4875901..603d51037b 100644 --- a/platforms/chibios/drivers/uart.h +++ b/platforms/chibios/drivers/uart.h @@ -68,6 +68,22 @@ # define SD1_CR3 0 #endif +#ifndef SD1_WRDLEN +# define SD1_WRDLEN 3 +#endif + +#ifndef SD1_STPBIT +# define SD1_STPBIT 0 +#endif + +#ifndef SD1_PARITY +# define SD1_PARITY 0 +#endif + +#ifndef SD1_ATFLCT +# define SD1_ATFLCT 0 +#endif + void uart_init(uint32_t baud); void uart_write(uint8_t data); diff --git a/platforms/chibios/flash.mk b/platforms/chibios/flash.mk index 31f69595da..6ee53172d2 100644 --- a/platforms/chibios/flash.mk +++ b/platforms/chibios/flash.mk @@ -23,6 +23,20 @@ define EXEC_DFU_UTIL $(DFU_UTIL) $(DFU_ARGS) -D $(BUILD_DIR)/$(TARGET).bin endef + +define EXEC_WB32_DFU_UPDATER + if ! wb32-dfu-updater_cli -l | grep -q "Found DFU"; then \ + printf "$(MSG_BOOTLOADER_NOT_FOUND_QUICK_RETRY)" ;\ + sleep $(BOOTLOADER_RETRY_TIME) ;\ + while ! wb32-dfu-updater_cli -l | grep -q "Found DFU"; do \ + printf "." ;\ + sleep $(BOOTLOADER_RETRY_TIME) ;\ + done ;\ + printf "\n" ;\ + fi + wb32-dfu-updater_cli -D $(BUILD_DIR)/$(TARGET).bin +endef + dfu-util: $(BUILD_DIR)/$(TARGET).bin cpfirmware sizeafter $(call EXEC_DFU_UTIL) @@ -82,6 +96,8 @@ else ifeq ($(strip $(MCU_FAMILY)),MIMXRT1062) $(UNSYNC_OUTPUT_CMD) && $(call EXEC_TEENSY) else ifeq ($(strip $(MCU_FAMILY)),STM32) $(UNSYNC_OUTPUT_CMD) && $(call EXEC_DFU_UTIL) +else ifeq ($(strip $(MCU_FAMILY)),WB32) + $(UNSYNC_OUTPUT_CMD) && $(call EXEC_WB32_DFU_UPDATER) else ifeq ($(strip $(MCU_FAMILY)),GD32V) $(UNSYNC_OUTPUT_CMD) && $(call EXEC_DFU_UTIL) else diff --git a/platforms/chibios/platform.mk b/platforms/chibios/platform.mk index 1c8d430074..45e3377882 100644 --- a/platforms/chibios/platform.mk +++ b/platforms/chibios/platform.mk @@ -141,6 +141,10 @@ ifdef STM32_BOOTLOADER_ADDRESS OPT_DEFS += -DSTM32_BOOTLOADER_ADDRESS=$(STM32_BOOTLOADER_ADDRESS) endif +ifdef WB32_BOOTLOADER_ADDRESS + OPT_DEFS += -DWB32_BOOTLOADER_ADDRESS=$(WB32_BOOTLOADER_ADDRESS) +endif + # Work out if we need to set up the include for the bootloader definitions ifneq ("$(wildcard $(KEYBOARD_PATH_5)/bootloader_defs.h)","") OPT_DEFS += -include $(KEYBOARD_PATH_5)/bootloader_defs.h From 94d7cc371265a2838fb44508bdc34d8be59a11eb Mon Sep 17 00:00:00 2001 From: Nick Brassel <nick@tzarc.org> Date: Sat, 27 Nov 2021 10:35:24 +1100 Subject: [PATCH 586/595] WB32F3G71 config migration with removal of unnecessary items. (#15309) * Config migration with removal of unnecessary items. * Removed as per suggestion. --- .../GENERIC_WB32_F3G71XX/configs/chconf.h | 757 ------------------ .../GENERIC_WB32_F3G71XX/configs/halconf.h | 532 ------------ 2 files changed, 1289 deletions(-) delete mode 100644 platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/chconf.h delete mode 100644 platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/halconf.h diff --git a/platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/chconf.h b/platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/chconf.h deleted file mode 100644 index 1b8bd5d84a..0000000000 --- a/platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/chconf.h +++ /dev/null @@ -1,757 +0,0 @@ -/* - Copyright (C) 2021 Westberry Technology (ChangZhou) Corp., Ltd - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file rt/templates/chconf.h - * @brief Configuration file template. - * @details A copy of this file must be placed in each project directory, it - * contains the application specific kernel settings. - * - * @addtogroup config - * @details Kernel related settings and hooks. - * @{ - */ - -#ifndef CHCONF_H -#define CHCONF_H - -#define _CHIBIOS_RT_CONF_ -#define _CHIBIOS_RT_CONF_VER_6_1_ - -/*===========================================================================*/ -/** - * @name System timers settings - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System time counter resolution. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_ST_RESOLUTION) -#define CH_CFG_ST_RESOLUTION 32 -#endif - -/** - * @brief System tick frequency. - * @details Frequency of the system timer that drives the system ticks. This - * setting also defines the system tick time unit. - */ -#if !defined(CH_CFG_ST_FREQUENCY) -#define CH_CFG_ST_FREQUENCY 10000 -#endif - -/** - * @brief Time intervals data size. - * @note Allowed values are 16, 32 or 64 bits. - */ -#if !defined(CH_CFG_INTERVALS_SIZE) -#define CH_CFG_INTERVALS_SIZE 32 -#endif - -/** - * @brief Time types data size. - * @note Allowed values are 16 or 32 bits. - */ -#if !defined(CH_CFG_TIME_TYPES_SIZE) -#define CH_CFG_TIME_TYPES_SIZE 32 -#endif - -/** - * @brief Time delta constant for the tick-less mode. - * @note If this value is zero then the system uses the classic - * periodic tick. This value represents the minimum number - * of ticks that is safe to specify in a timeout directive. - * The value one is not valid, timeouts are rounded up to - * this value. - */ -#if !defined(CH_CFG_ST_TIMEDELTA) -#define CH_CFG_ST_TIMEDELTA 0 -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel parameters and options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Round robin interval. - * @details This constant is the number of system ticks allowed for the - * threads before preemption occurs. Setting this value to zero - * disables the preemption for threads with equal priority and the - * round robin becomes cooperative. Note that higher priority - * threads can still preempt, the kernel is always preemptive. - * @note Disabling the round robin preemption makes the kernel more compact - * and generally faster. - * @note The round robin preemption is not supported in tickless mode and - * must be set to zero in that case. - */ -#if !defined(CH_CFG_TIME_QUANTUM) -#define CH_CFG_TIME_QUANTUM 0 -#endif - -/** - * @brief Idle thread automatic spawn suppression. - * @details When this option is activated the function @p chSysInit() - * does not spawn the idle thread. The application @p main() - * function becomes the idle thread and must implement an - * infinite loop. - */ -#if !defined(CH_CFG_NO_IDLE_THREAD) -#define CH_CFG_NO_IDLE_THREAD FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Performance options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief OS optimization. - * @details If enabled then time efficient rather than space efficient code - * is used when two possible implementations exist. - * - * @note This is not related to the compiler optimization options. - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_OPTIMIZE_SPEED) -#define CH_CFG_OPTIMIZE_SPEED TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Subsystem options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Time Measurement APIs. - * @details If enabled then the time measurement APIs are included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_TM) -#define CH_CFG_USE_TM TRUE -#endif - -/** - * @brief Threads registry APIs. - * @details If enabled then the registry APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_REGISTRY) -#define CH_CFG_USE_REGISTRY TRUE -#endif - -/** - * @brief Threads synchronization APIs. - * @details If enabled then the @p chThdWait() function is included in - * the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_WAITEXIT) -#define CH_CFG_USE_WAITEXIT TRUE -#endif - -/** - * @brief Semaphores APIs. - * @details If enabled then the Semaphores APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_SEMAPHORES) -#define CH_CFG_USE_SEMAPHORES TRUE -#endif - -/** - * @brief Semaphores queuing mode. - * @details If enabled then the threads are enqueued on semaphores by - * priority rather than in FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY) -#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE -#endif - -/** - * @brief Mutexes APIs. - * @details If enabled then the mutexes APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MUTEXES) -#define CH_CFG_USE_MUTEXES TRUE -#endif - -/** - * @brief Enables recursive behavior on mutexes. - * @note Recursive mutexes are heavier and have an increased - * memory footprint. - * - * @note The default is @p FALSE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE) -#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE -#endif - -/** - * @brief Conditional Variables APIs. - * @details If enabled then the conditional variables APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MUTEXES. - */ -#if !defined(CH_CFG_USE_CONDVARS) -#define CH_CFG_USE_CONDVARS TRUE -#endif - -/** - * @brief Conditional Variables APIs with timeout. - * @details If enabled then the conditional variables APIs with timeout - * specification are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_CONDVARS. - */ -#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT) -#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE -#endif - -/** - * @brief Events Flags APIs. - * @details If enabled then the event flags APIs are included in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_EVENTS) -#define CH_CFG_USE_EVENTS TRUE -#endif - -/** - * @brief Events Flags APIs with timeout. - * @details If enabled then the events APIs with timeout specification - * are included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_EVENTS. - */ -#if !defined(CH_CFG_USE_EVENTS_TIMEOUT) -#define CH_CFG_USE_EVENTS_TIMEOUT TRUE -#endif - -/** - * @brief Synchronous Messages APIs. - * @details If enabled then the synchronous messages APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MESSAGES) -#define CH_CFG_USE_MESSAGES TRUE -#endif - -/** - * @brief Synchronous Messages queuing mode. - * @details If enabled then messages are served by priority rather than in - * FIFO order. - * - * @note The default is @p FALSE. Enable this if you have special - * requirements. - * @note Requires @p CH_CFG_USE_MESSAGES. - */ -#if !defined(CH_CFG_USE_MESSAGES_PRIORITY) -#define CH_CFG_USE_MESSAGES_PRIORITY FALSE -#endif - -/** - * @brief Dynamic Threads APIs. - * @details If enabled then the dynamic threads creation APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_WAITEXIT. - * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. - */ -#if !defined(CH_CFG_USE_DYNAMIC) -#define CH_CFG_USE_DYNAMIC TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name OSLIB options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Mailboxes APIs. - * @details If enabled then the asynchronous messages (mailboxes) APIs are - * included in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_SEMAPHORES. - */ -#if !defined(CH_CFG_USE_MAILBOXES) -#define CH_CFG_USE_MAILBOXES TRUE -#endif - -/** - * @brief Core Memory Manager APIs. - * @details If enabled then the core memory manager APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMCORE) -#define CH_CFG_USE_MEMCORE TRUE -#endif - -/** - * @brief Managed RAM size. - * @details Size of the RAM area to be managed by the OS. If set to zero - * then the whole available RAM is used. The core memory is made - * available to the heap allocator and/or can be used directly through - * the simplified core memory allocator. - * - * @note In order to let the OS manage the whole RAM the linker script must - * provide the @p __heap_base__ and @p __heap_end__ symbols. - * @note Requires @p CH_CFG_USE_MEMCORE. - */ -#if !defined(CH_CFG_MEMCORE_SIZE) -#define CH_CFG_MEMCORE_SIZE 0 -#endif - -/** - * @brief Heap Allocator APIs. - * @details If enabled then the memory heap allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or - * @p CH_CFG_USE_SEMAPHORES. - * @note Mutexes are recommended. - */ -#if !defined(CH_CFG_USE_HEAP) -#define CH_CFG_USE_HEAP TRUE -#endif - -/** - * @brief Memory Pools Allocator APIs. - * @details If enabled then the memory pools allocator APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_MEMPOOLS) -#define CH_CFG_USE_MEMPOOLS TRUE -#endif - -/** - * @brief Objects FIFOs APIs. - * @details If enabled then the objects FIFOs APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_FIFOS) -#define CH_CFG_USE_OBJ_FIFOS TRUE -#endif - -/** - * @brief Pipes APIs. - * @details If enabled then the pipes APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_PIPES) -#define CH_CFG_USE_PIPES TRUE -#endif - -/** - * @brief Objects Caches APIs. - * @details If enabled then the objects caches APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_OBJ_CACHES) -#define CH_CFG_USE_OBJ_CACHES TRUE -#endif - -/** - * @brief Delegate threads APIs. - * @details If enabled then the delegate threads APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_DELEGATES) -#define CH_CFG_USE_DELEGATES TRUE -#endif - -/** - * @brief Jobs Queues APIs. - * @details If enabled then the jobs queues APIs are included - * in the kernel. - * - * @note The default is @p TRUE. - */ -#if !defined(CH_CFG_USE_JOBS) -#define CH_CFG_USE_JOBS TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Objects factory options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Objects Factory APIs. - * @details If enabled then the objects factory APIs are included in the - * kernel. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_CFG_USE_FACTORY) -#define CH_CFG_USE_FACTORY TRUE -#endif - -/** - * @brief Maximum length for object names. - * @details If the specified length is zero then the name is stored by - * pointer but this could have unintended side effects. - */ -#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH) -#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8 -#endif - -/** - * @brief Enables the registry of generic objects. - */ -#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY) -#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE -#endif - -/** - * @brief Enables factory for generic buffers. - */ -#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS) -#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE -#endif - -/** - * @brief Enables factory for semaphores. - */ -#if !defined(CH_CFG_FACTORY_SEMAPHORES) -#define CH_CFG_FACTORY_SEMAPHORES TRUE -#endif - -/** - * @brief Enables factory for mailboxes. - */ -#if !defined(CH_CFG_FACTORY_MAILBOXES) -#define CH_CFG_FACTORY_MAILBOXES TRUE -#endif - -/** - * @brief Enables factory for objects FIFOs. - */ -#if !defined(CH_CFG_FACTORY_OBJ_FIFOS) -#define CH_CFG_FACTORY_OBJ_FIFOS TRUE -#endif - -/** - * @brief Enables factory for Pipes. - */ -#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__) -#define CH_CFG_FACTORY_PIPES TRUE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Debug options - * @{ - */ -/*===========================================================================*/ - -/** - * @brief Debug option, kernel statistics. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_STATISTICS) -#define CH_DBG_STATISTICS FALSE -#endif - -/** - * @brief Debug option, system state check. - * @details If enabled the correct call protocol for system APIs is checked - * at runtime. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_SYSTEM_STATE_CHECK) -#define CH_DBG_SYSTEM_STATE_CHECK FALSE -#endif - -/** - * @brief Debug option, parameters checks. - * @details If enabled then the checks on the API functions input - * parameters are activated. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_CHECKS) -#define CH_DBG_ENABLE_CHECKS TRUE -#endif - -/** - * @brief Debug option, consistency checks. - * @details If enabled then all the assertions in the kernel code are - * activated. This includes consistency checks inside the kernel, - * runtime anomalies and port-defined checks. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_ENABLE_ASSERTS) -#define CH_DBG_ENABLE_ASSERTS FALSE -#endif - -/** - * @brief Debug option, trace buffer. - * @details If enabled then the trace buffer is activated. - * - * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_MASK) -#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL -#endif - -/** - * @brief Trace buffer entries. - * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is - * different from @p CH_DBG_TRACE_MASK_DISABLED. - */ -#if !defined(CH_DBG_TRACE_BUFFER_SIZE) -#define CH_DBG_TRACE_BUFFER_SIZE 128 -#endif - -/** - * @brief Debug option, stack checks. - * @details If enabled then a runtime stack check is performed. - * - * @note The default is @p FALSE. - * @note The stack check is performed in a architecture/port dependent way. - * It may not be implemented or some ports. - * @note The default failure mode is to halt the system with the global - * @p panic_msg variable set to @p NULL. - */ -#if !defined(CH_DBG_ENABLE_STACK_CHECK) -#define CH_DBG_ENABLE_STACK_CHECK TRUE -#endif - -/** - * @brief Debug option, stacks initialization. - * @details If enabled then the threads working area is filled with a byte - * value when a thread is created. This can be useful for the - * runtime measurement of the used stack. - * - * @note The default is @p FALSE. - */ -#if !defined(CH_DBG_FILL_THREADS) -#define CH_DBG_FILL_THREADS TRUE -#endif - -/** - * @brief Debug option, threads profiling. - * @details If enabled then a field is added to the @p thread_t structure that - * counts the system ticks occurred while executing the thread. - * - * @note The default is @p FALSE. - * @note This debug option is not currently compatible with the - * tickless mode. - */ -#if !defined(CH_DBG_THREADS_PROFILING) -#define CH_DBG_THREADS_PROFILING FALSE -#endif - -/** @} */ - -/*===========================================================================*/ -/** - * @name Kernel hooks - * @{ - */ -/*===========================================================================*/ - -/** - * @brief System structure extension. - * @details User fields added to the end of the @p ch_system_t structure. - */ -#define CH_CFG_SYSTEM_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief System initialization hook. - * @details User initialization code added to the @p chSysInit() function - * just before interrupts are enabled globally. - */ -#define CH_CFG_SYSTEM_INIT_HOOK() { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads descriptor structure extension. - * @details User fields added to the end of the @p thread_t structure. - */ -#define CH_CFG_THREAD_EXTRA_FIELDS \ - /* Add threads custom fields here.*/ - -/** - * @brief Threads initialization hook. - * @details User initialization code added to the @p _thread_init() function. - * - * @note It is invoked from within @p _thread_init() and implicitly from all - * the threads creation APIs. - */ -#define CH_CFG_THREAD_INIT_HOOK(tp) { \ - /* Add threads initialization code here.*/ \ -} - -/** - * @brief Threads finalization hook. - * @details User finalization code added to the @p chThdExit() API. - */ -#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ - /* Add threads finalization code here.*/ \ -} - -/** - * @brief Context switch hook. - * @details This hook is invoked just before switching between threads. - */ -#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ - /* Context switch code here.*/ \ -} - -/** - * @brief ISR enter hook. - */ -#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ - /* IRQ prologue code here.*/ \ -} - -/** - * @brief ISR exit hook. - */ -#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ - /* IRQ epilogue code here.*/ \ -} - -/** - * @brief Idle thread enter hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to activate a power saving mode. - */ -#define CH_CFG_IDLE_ENTER_HOOK() { \ - /* Idle-enter code here.*/ \ -} - -/** - * @brief Idle thread leave hook. - * @note This hook is invoked within a critical zone, no OS functions - * should be invoked from here. - * @note This macro can be used to deactivate a power saving mode. - */ -#define CH_CFG_IDLE_LEAVE_HOOK() { \ - /* Idle-leave code here.*/ \ -} - -/** - * @brief Idle Loop hook. - * @details This hook is continuously invoked by the idle thread loop. - */ -#define CH_CFG_IDLE_LOOP_HOOK() { \ - /* Idle loop code here.*/ \ -} - -/** - * @brief System tick event hook. - * @details This hook is invoked in the system tick handler immediately - * after processing the virtual timers queue. - */ -#define CH_CFG_SYSTEM_TICK_HOOK() { \ - /* System tick event code here.*/ \ -} - -/** - * @brief System halt hook. - * @details This hook is invoked in case to a system halting error before - * the system is halted. - */ -#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ - /* System halt code here.*/ \ -} - -/** - * @brief Trace hook. - * @details This hook is invoked each time a new record is written in the - * trace buffer. - */ -#define CH_CFG_TRACE_HOOK(tep) { \ - /* Trace code here.*/ \ -} - - -/** @} */ - -/*===========================================================================*/ -/* Port-specific settings (override port settings defaulted in chcore.h). */ -/*===========================================================================*/ - -#endif /* CHCONF_H */ - -/** @} */ diff --git a/platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/halconf.h b/platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/halconf.h deleted file mode 100644 index ac6ec9eade..0000000000 --- a/platforms/chibios/boards/GENERIC_WB32_F3G71XX/configs/halconf.h +++ /dev/null @@ -1,532 +0,0 @@ -/* - Copyright (C) 2021 Westberry Technology (ChangZhou) Corp., Ltd - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. -*/ - -/** - * @file templates/halconf.h - * @brief HAL configuration header. - * @details HAL configuration file, this file allows to enable or disable the - * various device drivers from your application. You may also use - * this file in order to override the device drivers default settings. - * - * @addtogroup HAL_CONF - * @{ - */ - -#ifndef HALCONF_H -#define HALCONF_H - -#define _CHIBIOS_HAL_CONF_ -#define _CHIBIOS_HAL_CONF_VER_7_1_ - -#include "mcuconf.h" - -/** - * @brief Enables the PAL subsystem. - */ -#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) -#define HAL_USE_PAL TRUE -#endif - -/** - * @brief Enables the ADC subsystem. - */ -#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) -#define HAL_USE_ADC FALSE -#endif - -/** - * @brief Enables the CAN subsystem. - */ -#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) -#define HAL_USE_CAN FALSE -#endif - -/** - * @brief Enables the cryptographic subsystem. - */ -#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__) -#define HAL_USE_CRY FALSE -#endif - -/** - * @brief Enables the DAC subsystem. - */ -#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) -#define HAL_USE_DAC FALSE -#endif - -/** - * @brief Enables the EFlash subsystem. - */ -#if !defined(HAL_USE_EFL) || defined(__DOXYGEN__) -#define HAL_USE_EFL FALSE -#endif - -/** - * @brief Enables the GPT subsystem. - */ -#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) -#define HAL_USE_GPT FALSE -#endif - -/** - * @brief Enables the I2C subsystem. - */ -#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) -#define HAL_USE_I2C FALSE -#endif - -/** - * @brief Enables the I2S subsystem. - */ -#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) -#define HAL_USE_I2S FALSE -#endif - -/** - * @brief Enables the ICU subsystem. - */ -#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) -#define HAL_USE_ICU FALSE -#endif - -/** - * @brief Enables the MAC subsystem. - */ -#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) -#define HAL_USE_MAC FALSE -#endif - -/** - * @brief Enables the MMC_SPI subsystem. - */ -#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) -#define HAL_USE_MMC_SPI FALSE -#endif - -/** - * @brief Enables the PWM subsystem. - */ -#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) -#define HAL_USE_PWM FALSE -#endif - -/** - * @brief Enables the RTC subsystem. - */ -#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) -#define HAL_USE_RTC FALSE -#endif - -/** - * @brief Enables the SDC subsystem. - */ -#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) -#define HAL_USE_SDC FALSE -#endif - -/** - * @brief Enables the SERIAL subsystem. - */ -#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL FALSE -#endif - -/** - * @brief Enables the SERIAL over USB subsystem. - */ -#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) -#define HAL_USE_SERIAL_USB FALSE -#endif - -/** - * @brief Enables the SIO subsystem. - */ -#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__) -#define HAL_USE_SIO FALSE -#endif - -/** - * @brief Enables the SPI subsystem. - */ -#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) -#define HAL_USE_SPI FALSE -#endif - -/** - * @brief Enables the TRNG subsystem. - */ -#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__) -#define HAL_USE_TRNG FALSE -#endif - -/** - * @brief Enables the UART subsystem. - */ -#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) -#define HAL_USE_UART FALSE -#endif - -/** - * @brief Enables the USB subsystem. - */ -#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) -#define HAL_USE_USB TRUE -#endif - -/** - * @brief Enables the WDG subsystem. - */ -#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) -#define HAL_USE_WDG FALSE -#endif - -/** - * @brief Enables the WSPI subsystem. - */ -#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__) -#define HAL_USE_WSPI FALSE -#endif - -/*===========================================================================*/ -/* PAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__) -#define PAL_USE_CALLBACKS FALSE // additional : The original is FALSE -#endif - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__) -#define PAL_USE_WAIT FALSE -#endif - -/*===========================================================================*/ -/* ADC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) -#define ADC_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define ADC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* CAN driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Sleep mode related APIs inclusion switch. - */ -#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) -#define CAN_USE_SLEEP_MODE FALSE -#endif - -/** - * @brief Enforces the driver to use direct callbacks rather than OSAL events. - */ -#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__) -#define CAN_ENFORCE_USE_CALLBACKS FALSE -#endif - -/*===========================================================================*/ -/* CRY driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the SW fall-back of the cryptographic driver. - * @details When enabled, this option, activates a fall-back software - * implementation for algorithms not supported by the underlying - * hardware. - * @note Fall-back implementations may not be present for all algorithms. - */ -#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_USE_FALLBACK FALSE -#endif - -/** - * @brief Makes the driver forcibly use the fall-back implementations. - */ -#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__) -#define HAL_CRY_ENFORCE_FALLBACK FALSE -#endif - -/*===========================================================================*/ -/* DAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__) -#define DAC_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define DAC_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* I2C driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the mutual exclusion APIs on the I2C bus. - */ -#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define I2C_USE_MUTUAL_EXCLUSION TRUE -#endif - -/*===========================================================================*/ -/* MAC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables the zero-copy API. - */ -#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) -#define MAC_USE_ZERO_COPY FALSE -#endif - -/** - * @brief Enables an event sources for incoming packets. - */ -#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) -#define MAC_USE_EVENTS FALSE -#endif - -/*===========================================================================*/ -/* MMC_SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - * This option is recommended also if the SPI driver does not - * use a DMA channel and heavily loads the CPU. - */ -#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) -#define MMC_NICE_WAITING FALSE -#endif - -/*===========================================================================*/ -/* SDC driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Number of initialization attempts before rejecting the card. - * @note Attempts are performed at 10mS intervals. - */ -#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) -#define SDC_INIT_RETRY 100 -#endif - -/** - * @brief Include support for MMC cards. - * @note MMC support is not yet implemented so this option must be kept - * at @p FALSE. - */ -#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) -#define SDC_MMC_SUPPORT FALSE -#endif - -/** - * @brief Delays insertions. - * @details If enabled this options inserts delays into the MMC waiting - * routines releasing some extra CPU time for the threads with - * lower priority, this may slow down the driver a bit however. - */ -#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) -#define SDC_NICE_WAITING TRUE -#endif - -/** - * @brief OCR initialization constant for V20 cards. - */ -#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__) -#define SDC_INIT_OCR_V20 0x50FF8000U -#endif - -/** - * @brief OCR initialization constant for non-V20 cards. - */ -#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__) -#define SDC_INIT_OCR 0x80100000U -#endif - -/*===========================================================================*/ -/* SERIAL driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Default bit rate. - * @details Configuration parameter, this is the baud rate selected for the - * default configuration. - */ -#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) -#define SERIAL_DEFAULT_BITRATE 38400 -#endif - -/** - * @brief Serial buffers size. - * @details Configuration parameter, you can change the depth of the queue - * buffers depending on the requirements of your application. - * @note The default is 16 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_BUFFERS_SIZE 16 -#endif - -/*===========================================================================*/ -/* SERIAL_USB driver related setting. */ -/*===========================================================================*/ - -/** - * @brief Serial over USB buffers size. - * @details Configuration parameter, the buffer size must be a multiple of - * the USB data endpoint maximum packet size. - * @note The default is 256 bytes for both the transmission and receive - * buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_SIZE 256 -#endif - -/** - * @brief Serial over USB number of buffers. - * @note The default is 2 buffers. - */ -#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__) -#define SERIAL_USB_BUFFERS_NUMBER 2 -#endif - -/*===========================================================================*/ -/* SPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) -#define SPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables circular transfers APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__) -#define SPI_USE_CIRCULAR FALSE -#endif - - -/** - * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define SPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -/** - * @brief Handling method for SPI CS line. - * @note Disabling this option saves both code and data space. - */ -#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__) -#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD -#endif - -/*===========================================================================*/ -/* UART driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__) -#define UART_USE_WAIT FALSE -#endif - -/** - * @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define UART_USE_MUTUAL_EXCLUSION FALSE -#endif - -/*===========================================================================*/ -/* USB driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) -#define USB_USE_WAIT TRUE -#endif - -/*===========================================================================*/ -/* WSPI driver related settings. */ -/*===========================================================================*/ - -/** - * @brief Enables synchronous APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__) -#define WSPI_USE_WAIT TRUE -#endif - -/** - * @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs. - * @note Disabling this option saves both code and data space. - */ -#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) -#define WSPI_USE_MUTUAL_EXCLUSION TRUE -#endif - -#endif /* HALCONF_H */ - -/** @} */ From 4d0dd1eab78c7f2af40a84a34da12a2a8398fda9 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre <drashna@live.com> Date: Fri, 26 Nov 2021 19:40:09 -0800 Subject: [PATCH 587/595] [Bug] Revert Assymmetrical Split Encoder support (#12090) (#15311) * Revert "fix broken macro in transport.h (#15239)" This reverts commit 06f18e22d9aff0afa4dce101a6a1b2cae5511365. * Revert "Rework encoders to enable asymmetric split keyboards (#12090)" This reverts commit 32215d5bff52262542a2f8d2a221b0303f02c019. --- build_test.mk | 1 - docs/feature_encoders.md | 15 +- quantum/encoder.c | 146 +++++++----------- quantum/encoder.h | 3 +- quantum/encoder/tests/encoder_tests.cpp | 144 ----------------- quantum/encoder/tests/encoder_tests_split.cpp | 143 ----------------- quantum/encoder/tests/mock.c | 34 ---- quantum/encoder/tests/mock.h | 40 ----- quantum/encoder/tests/mock_split.c | 36 ----- quantum/encoder/tests/mock_split.h | 48 ------ quantum/encoder/tests/rules.mk | 13 -- quantum/encoder/tests/testlist.mk | 3 - quantum/split_common/transport.h | 7 +- testlist.mk | 1 - 14 files changed, 58 insertions(+), 576 deletions(-) delete mode 100644 quantum/encoder/tests/encoder_tests.cpp delete mode 100644 quantum/encoder/tests/encoder_tests_split.cpp delete mode 100644 quantum/encoder/tests/mock.c delete mode 100644 quantum/encoder/tests/mock.h delete mode 100644 quantum/encoder/tests/mock_split.c delete mode 100644 quantum/encoder/tests/mock_split.h delete mode 100644 quantum/encoder/tests/rules.mk delete mode 100644 quantum/encoder/tests/testlist.mk diff --git a/build_test.mk b/build_test.mk index 136a0455f0..a5d63adab4 100644 --- a/build_test.mk +++ b/build_test.mk @@ -58,7 +58,6 @@ include $(BUILDDEFS_PATH)/generic_features.mk include $(PLATFORM_PATH)/common.mk include $(TMK_PATH)/protocol.mk include $(QUANTUM_PATH)/debounce/tests/rules.mk -include $(QUANTUM_PATH)/encoder/tests/rules.mk include $(QUANTUM_PATH)/sequencer/tests/rules.mk include $(PLATFORM_PATH)/test/rules.mk ifneq ($(filter $(FULL_TESTS),$(TEST)),) diff --git a/docs/feature_encoders.md b/docs/feature_encoders.md index 5b6c3f163f..8e854c1e58 100644 --- a/docs/feature_encoders.md +++ b/docs/feature_encoders.md @@ -46,9 +46,7 @@ For 4× encoders you also can assign default position if encoder skips pulses wh ## Split Keyboards -The above is enough for split keyboards that are symmetrical, i.e. the halves have the same number of encoders and they are on the same pins. -If the halves are not symmetrical, you can define the pinout (and optionally, resolutions) of the right half separately. -The left half will use the definitions above. +If you are using different pinouts for the encoders on each half of a split keyboard, you can define the pinout (and optionally, resolutions) for the right half like this: ```c #define ENCODERS_PAD_A_RIGHT { encoder1a, encoder2a } @@ -56,17 +54,6 @@ The left half will use the definitions above. #define ENCODER_RESOLUTIONS_RIGHT { 2, 4 } ``` -If only the right half has encoders, you must still define an empty array for the left pads (and resolutions, if you define `ENCODER_RESOLUTIONS_RIGHT`). - -```c -#define ENCODERS_PAD_A { } -#define ENCODERS_PAD_B { } -#define ENCODER_RESOLUTIONS { } -#define ENCODERS_PAD_A_RIGHT { encoder1a, encoder2a } -#define ENCODERS_PAD_B_RIGHT { encoder1b, encoder2b } -#define ENCODER_RESOLUTIONS_RIGHT { 2, 4 } -``` - ## Callbacks The callback functions can be inserted into your `<keyboard>.c`: diff --git a/quantum/encoder.c b/quantum/encoder.c index 7d4e978981..8fb87281c2 100644 --- a/quantum/encoder.c +++ b/quantum/encoder.c @@ -16,17 +16,8 @@ */ #include "encoder.h" - -// this is for unit testing -#if defined(ENCODER_MOCK_SINGLE) -# include "encoder/tests/mock.h" -#elif defined(ENCODER_MOCK_SPLIT) -# include "encoder/tests/mock_split.h" -#else -# include <gpio.h> -# ifdef SPLIT_KEYBOARD -# include "split_util.h" -# endif +#ifdef SPLIT_KEYBOARD +# include "split_util.h" #endif // for memcpy @@ -36,41 +27,17 @@ # define ENCODER_RESOLUTION 4 #endif -#if (!defined(ENCODERS_PAD_A) || !defined(ENCODERS_PAD_B)) && (!defined(ENCODERS_PAD_A) || !defined(ENCODERS_PAD_B)) -# error "No encoder pads defined by ENCODERS_PAD_A and ENCODERS_PAD_B or ENCODERS_PAD_A_RIGHT and ENCODERS_PAD_B_RIGHT" +#if !defined(ENCODERS_PAD_A) || !defined(ENCODERS_PAD_B) +# error "No encoder pads defined by ENCODERS_PAD_A and ENCODERS_PAD_B" #endif -// on split keyboards, these are the pads and resolutions for the left half +#define NUMBER_OF_ENCODERS (sizeof(encoders_pad_a) / sizeof(pin_t)) static pin_t encoders_pad_a[] = ENCODERS_PAD_A; static pin_t encoders_pad_b[] = ENCODERS_PAD_B; #ifdef ENCODER_RESOLUTIONS static uint8_t encoder_resolutions[] = ENCODER_RESOLUTIONS; #endif -#ifndef SPLIT_KEYBOARD -# define NUMBER_OF_ENCODERS (sizeof(encoders_pad_a) / sizeof(pin_t)) -#else -// if no pads for right half are defined, we assume the keyboard is symmetric (i.e. same pads) -# ifndef ENCODERS_PAD_A_RIGHT -# define ENCODERS_PAD_A_RIGHT ENCODERS_PAD_A -# endif -# ifndef ENCODERS_PAD_B_RIGHT -# define ENCODERS_PAD_B_RIGHT ENCODERS_PAD_B -# endif -# if defined(ENCODER_RESOLUTIONS) && !defined(ENCODER_RESOLUTIONS_RIGHT) -# define ENCODER_RESOLUTIONS_RIGHT ENCODER_RESOLUTIONS -# endif - -# define NUMBER_OF_ENCODERS ((sizeof(encoders_pad_a) + sizeof(encoders_pad_a_right)) / sizeof(pin_t)) -# define NUMBER_OF_ENCODERS_LEFT (sizeof(encoders_pad_a) / sizeof(pin_t)) -# define NUMBER_OF_ENCODERS_RIGHT (sizeof(encoders_pad_a_right) / sizeof(pin_t)) -static pin_t encoders_pad_a_right[] = ENCODERS_PAD_A_RIGHT; -static pin_t encoders_pad_b_right[] = ENCODERS_PAD_B_RIGHT; -# ifdef ENCODER_RESOLUTIONS_RIGHT -static uint8_t encoder_resolutions_right[] = ENCODER_RESOLUTIONS_RIGHT; -# endif -#endif - #ifndef ENCODER_DIRECTION_FLIP # define ENCODER_CLOCKWISE true # define ENCODER_COUNTER_CLOCKWISE false @@ -83,81 +50,78 @@ static int8_t encoder_LUT[] = {0, -1, 1, 0, 1, 0, 0, -1, -1, 0, 0, 1, 0, 1, -1, static uint8_t encoder_state[NUMBER_OF_ENCODERS] = {0}; static int8_t encoder_pulses[NUMBER_OF_ENCODERS] = {0}; +#ifdef SPLIT_KEYBOARD +// right half encoders come over as second set of encoders +static uint8_t encoder_value[NUMBER_OF_ENCODERS * 2] = {0}; +// row offsets for each hand +static uint8_t thisHand, thatHand; +#else static uint8_t encoder_value[NUMBER_OF_ENCODERS] = {0}; +#endif __attribute__((weak)) bool encoder_update_user(uint8_t index, bool clockwise) { return true; } __attribute__((weak)) bool encoder_update_kb(uint8_t index, bool clockwise) { return encoder_update_user(index, clockwise); } -// number of encoders connected to this controller -static uint8_t numEncodersHere; -// index of the first encoder connected to this controller (only for right halves, this will be nonzero) -static uint8_t firstEncoderHere; -#ifdef SPLIT_KEYBOARD -// index of the first encoder connected to the other half -static uint8_t firstEncoderThere; -#endif -// the pads for this controller -static pin_t* pad_a; -static pin_t* pad_b; - void encoder_init(void) { -#ifndef SPLIT_KEYBOARD - numEncodersHere = NUMBER_OF_ENCODERS; - pad_a = encoders_pad_a; - pad_b = encoders_pad_b; - firstEncoderHere = 0; -#else - if (isLeftHand) { - numEncodersHere = NUMBER_OF_ENCODERS_LEFT; - pad_a = encoders_pad_a; - pad_b = encoders_pad_b; - firstEncoderHere = 0; - firstEncoderThere = NUMBER_OF_ENCODERS_LEFT; - } else { - numEncodersHere = NUMBER_OF_ENCODERS_RIGHT; - pad_a = encoders_pad_a_right; - pad_b = encoders_pad_b_right; - firstEncoderHere = NUMBER_OF_ENCODERS_LEFT; - firstEncoderThere = 0; +#if defined(SPLIT_KEYBOARD) && defined(ENCODERS_PAD_A_RIGHT) && defined(ENCODERS_PAD_B_RIGHT) + if (!isLeftHand) { + const pin_t encoders_pad_a_right[] = ENCODERS_PAD_A_RIGHT; + const pin_t encoders_pad_b_right[] = ENCODERS_PAD_B_RIGHT; +# if defined(ENCODER_RESOLUTIONS_RIGHT) + const uint8_t encoder_resolutions_right[] = ENCODER_RESOLUTIONS_RIGHT; +# endif + for (uint8_t i = 0; i < NUMBER_OF_ENCODERS; i++) { + encoders_pad_a[i] = encoders_pad_a_right[i]; + encoders_pad_b[i] = encoders_pad_b_right[i]; +# if defined(ENCODER_RESOLUTIONS_RIGHT) + encoder_resolutions[i] = encoder_resolutions_right[i]; +# endif + } } #endif - for (int i = 0; i < numEncodersHere; i++) { - setPinInputHigh(pad_a[i]); - setPinInputHigh(pad_b[i]); + for (int i = 0; i < NUMBER_OF_ENCODERS; i++) { + setPinInputHigh(encoders_pad_a[i]); + setPinInputHigh(encoders_pad_b[i]); - encoder_state[firstEncoderHere + i] = (readPin(pad_a[i]) << 0) | (readPin(pad_b[i]) << 1); + encoder_state[i] = (readPin(encoders_pad_a[i]) << 0) | (readPin(encoders_pad_b[i]) << 1); } + +#ifdef SPLIT_KEYBOARD + thisHand = isLeftHand ? 0 : NUMBER_OF_ENCODERS; + thatHand = NUMBER_OF_ENCODERS - thisHand; +#endif } -static bool encoder_update(int8_t index, uint8_t state) { - bool changed = false; +static bool encoder_update(uint8_t index, uint8_t state) { + bool changed = false; + uint8_t i = index; #ifdef ENCODER_RESOLUTIONS -# ifndef SPLIT_KEYBOARD - int8_t resolution = encoder_resolutions[index]; -# else - int8_t resolution = isLeftHand ? encoder_resolutions[index] : encoder_resolutions_right[index - NUMBER_OF_ENCODERS_LEFT]; -# endif + uint8_t resolution = encoder_resolutions[i]; #else uint8_t resolution = ENCODER_RESOLUTION; #endif - encoder_pulses[index] += encoder_LUT[state & 0xF]; - if (encoder_pulses[index] >= resolution) { + +#ifdef SPLIT_KEYBOARD + index += thisHand; +#endif + encoder_pulses[i] += encoder_LUT[state & 0xF]; + if (encoder_pulses[i] >= resolution) { encoder_value[index]++; changed = true; encoder_update_kb(index, ENCODER_COUNTER_CLOCKWISE); } - if (encoder_pulses[index] <= -resolution) { // direction is arbitrary here, but this clockwise + if (encoder_pulses[i] <= -resolution) { // direction is arbitrary here, but this clockwise encoder_value[index]--; changed = true; encoder_update_kb(index, ENCODER_CLOCKWISE); } - encoder_pulses[index] %= resolution; + encoder_pulses[i] %= resolution; #ifdef ENCODER_DEFAULT_POS if ((state & 0x3) == ENCODER_DEFAULT_POS) { - encoder_pulses[index] = 0; + encoder_pulses[i] = 0; } #endif return changed; @@ -165,10 +129,10 @@ static bool encoder_update(int8_t index, uint8_t state) { bool encoder_read(void) { bool changed = false; - for (uint8_t i = 0; i < numEncodersHere; i++) { - encoder_state[firstEncoderHere + i] <<= 2; - encoder_state[firstEncoderHere + i] |= (readPin(pad_a[i]) << 0) | (readPin(pad_b[i]) << 1); - changed |= encoder_update(firstEncoderHere + i, encoder_state[firstEncoderHere + i]); + for (uint8_t i = 0; i < NUMBER_OF_ENCODERS; i++) { + encoder_state[i] <<= 2; + encoder_state[i] |= (readPin(encoders_pad_a[i]) << 0) | (readPin(encoders_pad_b[i]) << 1); + changed |= encoder_update(i, encoder_state[i]); } return changed; } @@ -176,12 +140,12 @@ bool encoder_read(void) { #ifdef SPLIT_KEYBOARD void last_encoder_activity_trigger(void); -void encoder_state_raw(uint8_t* slave_state) { memcpy(slave_state, &encoder_value[firstEncoderHere], sizeof(uint8_t) * numEncodersHere); } +void encoder_state_raw(uint8_t* slave_state) { memcpy(slave_state, &encoder_value[thisHand], sizeof(uint8_t) * NUMBER_OF_ENCODERS); } void encoder_update_raw(uint8_t* slave_state) { bool changed = false; - for (uint8_t i = 0; i < NUMBER_OF_ENCODERS - numEncodersHere; i++) { - uint8_t index = firstEncoderThere + i; + for (uint8_t i = 0; i < NUMBER_OF_ENCODERS; i++) { + uint8_t index = i + thatHand; int8_t delta = slave_state[i] - encoder_value[index]; while (delta > 0) { delta--; diff --git a/quantum/encoder.h b/quantum/encoder.h index 67f71ec0f0..25dc77721d 100644 --- a/quantum/encoder.h +++ b/quantum/encoder.h @@ -17,8 +17,7 @@ #pragma once -#include <stdbool.h> -#include <stdint.h> +#include "quantum.h" void encoder_init(void); bool encoder_read(void); diff --git a/quantum/encoder/tests/encoder_tests.cpp b/quantum/encoder/tests/encoder_tests.cpp deleted file mode 100644 index 1888fdab8d..0000000000 --- a/quantum/encoder/tests/encoder_tests.cpp +++ /dev/null @@ -1,144 +0,0 @@ -/* Copyright 2021 Balz Guenat - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "gtest/gtest.h" -#include "gmock/gmock.h" -#include <vector> -#include <algorithm> -#include <stdio.h> - -extern "C" { -#include "encoder.h" -#include "encoder/tests/mock.h" -} - -struct update { - int8_t index; - bool clockwise; -}; - -uint8_t uidx = 0; -update updates[32]; - -bool encoder_update_kb(uint8_t index, bool clockwise) { - updates[uidx % 32] = {index, clockwise}; - uidx++; - return true; -} - -bool setAndRead(pin_t pin, bool val) { - setPin(pin, val); - return encoder_read(); -} - -class EncoderTest : public ::testing::Test {}; - -TEST_F(EncoderTest, TestInit) { - uidx = 0; - encoder_init(); - EXPECT_EQ(pinIsInputHigh[0], true); - EXPECT_EQ(pinIsInputHigh[1], true); - EXPECT_EQ(uidx, 0); -} - -TEST_F(EncoderTest, TestOneClockwise) { - uidx = 0; - encoder_init(); - // send 4 pulses. with resolution 4, that's one step and we should get 1 update. - setAndRead(0, false); - setAndRead(1, false); - setAndRead(0, true); - setAndRead(1, true); - - EXPECT_EQ(uidx, 1); - EXPECT_EQ(updates[0].index, 0); - EXPECT_EQ(updates[0].clockwise, true); -} - -TEST_F(EncoderTest, TestOneCounterClockwise) { - uidx = 0; - encoder_init(); - setAndRead(1, false); - setAndRead(0, false); - setAndRead(1, true); - setAndRead(0, true); - - EXPECT_EQ(uidx, 1); - EXPECT_EQ(updates[0].index, 0); - EXPECT_EQ(updates[0].clockwise, false); -} - -TEST_F(EncoderTest, TestTwoClockwiseOneCC) { - uidx = 0; - encoder_init(); - setAndRead(0, false); - setAndRead(1, false); - setAndRead(0, true); - setAndRead(1, true); - setAndRead(0, false); - setAndRead(1, false); - setAndRead(0, true); - setAndRead(1, true); - setAndRead(1, false); - setAndRead(0, false); - setAndRead(1, true); - setAndRead(0, true); - - EXPECT_EQ(uidx, 3); - EXPECT_EQ(updates[0].index, 0); - EXPECT_EQ(updates[0].clockwise, true); - EXPECT_EQ(updates[1].index, 0); - EXPECT_EQ(updates[1].clockwise, true); - EXPECT_EQ(updates[2].index, 0); - EXPECT_EQ(updates[2].clockwise, false); -} - -TEST_F(EncoderTest, TestNoEarly) { - uidx = 0; - encoder_init(); - // send 3 pulses. with resolution 4, that's not enough for a step. - setAndRead(0, false); - setAndRead(1, false); - setAndRead(0, true); - EXPECT_EQ(uidx, 0); - // now send last pulse - setAndRead(1, true); - EXPECT_EQ(uidx, 1); - EXPECT_EQ(updates[0].index, 0); - EXPECT_EQ(updates[0].clockwise, true); -} - -TEST_F(EncoderTest, TestHalfway) { - uidx = 0; - encoder_init(); - // go halfway - setAndRead(0, false); - setAndRead(1, false); - EXPECT_EQ(uidx, 0); - // back off - setAndRead(1, true); - setAndRead(0, true); - EXPECT_EQ(uidx, 0); - // go all the way - setAndRead(0, false); - setAndRead(1, false); - setAndRead(0, true); - setAndRead(1, true); - // should result in 1 update - EXPECT_EQ(uidx, 1); - EXPECT_EQ(updates[0].index, 0); - EXPECT_EQ(updates[0].clockwise, true); -} diff --git a/quantum/encoder/tests/encoder_tests_split.cpp b/quantum/encoder/tests/encoder_tests_split.cpp deleted file mode 100644 index 25e52c83f9..0000000000 --- a/quantum/encoder/tests/encoder_tests_split.cpp +++ /dev/null @@ -1,143 +0,0 @@ -/* Copyright 2021 Balz Guenat - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "gtest/gtest.h" -#include "gmock/gmock.h" -#include <vector> -#include <algorithm> -#include <stdio.h> - -extern "C" { -#include "encoder.h" -#include "encoder/tests/mock_split.h" -} - -struct update { - int8_t index; - bool clockwise; -}; - -uint8_t uidx = 0; -update updates[32]; - -bool isLeftHand; - -bool encoder_update_kb(uint8_t index, bool clockwise) { - if (!isLeftHand) { - // this method has no effect on slave half - printf("ignoring update on right hand (%d,%s)\n", index, clockwise ? "CW" : "CC"); - return true; - } - updates[uidx % 32] = {index, clockwise}; - uidx++; - return true; -} - -bool setAndRead(pin_t pin, bool val) { - setPin(pin, val); - return encoder_read(); -} - -class EncoderTest : public ::testing::Test { - protected: - void SetUp() override { - uidx = 0; - for (int i = 0; i < 32; i++) { - pinIsInputHigh[i] = 0; - pins[i] = 0; - } - } -}; - -TEST_F(EncoderTest, TestInitLeft) { - isLeftHand = true; - encoder_init(); - EXPECT_EQ(pinIsInputHigh[0], true); - EXPECT_EQ(pinIsInputHigh[1], true); - EXPECT_EQ(pinIsInputHigh[2], false); - EXPECT_EQ(pinIsInputHigh[3], false); - EXPECT_EQ(uidx, 0); -} - -TEST_F(EncoderTest, TestInitRight) { - isLeftHand = false; - encoder_init(); - EXPECT_EQ(pinIsInputHigh[0], false); - EXPECT_EQ(pinIsInputHigh[1], false); - EXPECT_EQ(pinIsInputHigh[2], true); - EXPECT_EQ(pinIsInputHigh[3], true); - EXPECT_EQ(uidx, 0); -} - -TEST_F(EncoderTest, TestOneClockwiseLeft) { - isLeftHand = true; - encoder_init(); - // send 4 pulses. with resolution 4, that's one step and we should get 1 update. - setAndRead(0, false); - setAndRead(1, false); - setAndRead(0, true); - setAndRead(1, true); - - EXPECT_EQ(uidx, 1); - EXPECT_EQ(updates[0].index, 0); - EXPECT_EQ(updates[0].clockwise, true); -} - -TEST_F(EncoderTest, TestOneClockwiseRightSent) { - isLeftHand = false; - encoder_init(); - // send 4 pulses. with resolution 4, that's one step and we should get 1 update. - setAndRead(2, false); - setAndRead(3, false); - setAndRead(2, true); - setAndRead(3, true); - - uint8_t slave_state[2] = {0}; - encoder_state_raw(slave_state); - - EXPECT_EQ((int8_t)slave_state[0], -1); -} - -/* this test will not work after the previous test. - * this is due to encoder_value[1] already being set to -1 when simulating the right half. - * When we now receive this update acting as the left half, there is no change. - * This is hard to mock, as the static values inside encoder.c normally exist twice, once on each half, - * but here, they only exist once. - */ - -// TEST_F(EncoderTest, TestOneClockwiseRightReceived) { -// isLeftHand = true; -// encoder_init(); - -// uint8_t slave_state[2] = {255, 0}; -// encoder_update_raw(slave_state); - -// EXPECT_EQ(uidx, 1); -// EXPECT_EQ(updates[0].index, 1); -// EXPECT_EQ(updates[0].clockwise, true); -// } - -TEST_F(EncoderTest, TestOneCounterClockwiseRightReceived) { - isLeftHand = true; - encoder_init(); - - uint8_t slave_state[2] = {0, 0}; - encoder_update_raw(slave_state); - - EXPECT_EQ(uidx, 1); - EXPECT_EQ(updates[0].index, 1); - EXPECT_EQ(updates[0].clockwise, false); -} diff --git a/quantum/encoder/tests/mock.c b/quantum/encoder/tests/mock.c deleted file mode 100644 index d0506a938f..0000000000 --- a/quantum/encoder/tests/mock.c +++ /dev/null @@ -1,34 +0,0 @@ -/* Copyright 2021 Balz Guenat - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "mock.h" - -bool pins[32] = {0}; -bool pinIsInputHigh[32] = {0}; - -uint8_t mockSetPinInputHigh(pin_t pin) { - // dprintf("Setting pin %d input high.", pin); - pins[pin] = true; - pinIsInputHigh[pin] = true; - return 0; -} - -bool mockReadPin(pin_t pin) { return pins[pin]; } - -bool setPin(pin_t pin, bool val) { - pins[pin] = val; - return val; -} diff --git a/quantum/encoder/tests/mock.h b/quantum/encoder/tests/mock.h deleted file mode 100644 index dbc25a0846..0000000000 --- a/quantum/encoder/tests/mock.h +++ /dev/null @@ -1,40 +0,0 @@ -/* Copyright 2021 Balz Guenat - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#include <stdint.h> -#include <stdbool.h> - -/* Here, "pins" from 0 to 31 are allowed. */ -#define ENCODERS_PAD_A \ - { 0 } -#define ENCODERS_PAD_B \ - { 1 } - -typedef uint8_t pin_t; - -extern bool pins[]; -extern bool pinIsInputHigh[]; - -#define setPinInputHigh(pin) (mockSetPinInputHigh(pin)) -#define readPin(pin) (mockReadPin(pin)) - -uint8_t mockSetPinInputHigh(pin_t pin); - -bool mockReadPin(pin_t pin); - -bool setPin(pin_t pin, bool val); diff --git a/quantum/encoder/tests/mock_split.c b/quantum/encoder/tests/mock_split.c deleted file mode 100644 index 68bf3af599..0000000000 --- a/quantum/encoder/tests/mock_split.c +++ /dev/null @@ -1,36 +0,0 @@ -/* Copyright 2021 Balz Guenat - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include "mock_split.h" - -bool pins[32] = {0}; -bool pinIsInputHigh[32] = {0}; - -uint8_t mockSetPinInputHigh(pin_t pin) { - // dprintf("Setting pin %d input high.", pin); - pins[pin] = true; - pinIsInputHigh[pin] = true; - return 0; -} - -bool mockReadPin(pin_t pin) { return pins[pin]; } - -bool setPin(pin_t pin, bool val) { - pins[pin] = val; - return val; -} - -void last_encoder_activity_trigger(void) {} diff --git a/quantum/encoder/tests/mock_split.h b/quantum/encoder/tests/mock_split.h deleted file mode 100644 index 0ae62652f9..0000000000 --- a/quantum/encoder/tests/mock_split.h +++ /dev/null @@ -1,48 +0,0 @@ -/* Copyright 2021 Balz Guenat - * - * This program is free software: you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation, either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#pragma once - -#include <stdint.h> -#include <stdbool.h> - -#define SPLIT_KEYBOARD -/* Here, "pins" from 0 to 31 are allowed. */ -#define ENCODERS_PAD_A \ - { 0 } -#define ENCODERS_PAD_B \ - { 1 } -#define ENCODERS_PAD_A_RIGHT \ - { 2 } -#define ENCODERS_PAD_B_RIGHT \ - { 3 } - -typedef uint8_t pin_t; -extern bool isLeftHand; -void encoder_state_raw(uint8_t* slave_state); -void encoder_update_raw(uint8_t* slave_state); - -extern bool pins[]; -extern bool pinIsInputHigh[]; - -#define setPinInputHigh(pin) (mockSetPinInputHigh(pin)) -#define readPin(pin) (mockReadPin(pin)) - -uint8_t mockSetPinInputHigh(pin_t pin); - -bool mockReadPin(pin_t pin); - -bool setPin(pin_t pin, bool val); diff --git a/quantum/encoder/tests/rules.mk b/quantum/encoder/tests/rules.mk deleted file mode 100644 index b826ce3aed..0000000000 --- a/quantum/encoder/tests/rules.mk +++ /dev/null @@ -1,13 +0,0 @@ -encoder_DEFS := -DENCODER_MOCK_SINGLE - -encoder_SRC := \ - $(QUANTUM_PATH)/encoder/tests/mock.c \ - $(QUANTUM_PATH)/encoder/tests/encoder_tests.cpp \ - $(QUANTUM_PATH)/encoder.c - -encoder_split_DEFS := -DENCODER_MOCK_SPLIT - -encoder_split_SRC := \ - $(QUANTUM_PATH)/encoder/tests/mock_split.c \ - $(QUANTUM_PATH)/encoder/tests/encoder_tests_split.cpp \ - $(QUANTUM_PATH)/encoder.c diff --git a/quantum/encoder/tests/testlist.mk b/quantum/encoder/tests/testlist.mk deleted file mode 100644 index 1be9f4a054..0000000000 --- a/quantum/encoder/tests/testlist.mk +++ /dev/null @@ -1,3 +0,0 @@ -TEST_LIST += \ - encoder \ - encoder_split diff --git a/quantum/split_common/transport.h b/quantum/split_common/transport.h index 437d4bc1f6..1d4f6ed0cd 100644 --- a/quantum/split_common/transport.h +++ b/quantum/split_common/transport.h @@ -41,13 +41,8 @@ void transport_slave(matrix_row_t master_matrix[], matrix_row_t slave_matrix[]); bool transport_execute_transaction(int8_t id, const void *initiator2target_buf, uint16_t initiator2target_length, void *target2initiator_buf, uint16_t target2initiator_length); #ifdef ENCODER_ENABLE -# include "gpio.h" # include "encoder.h" -// if no pads for right half are defined, we assume the keyboard is symmetric (i.e. same pads) -# ifndef ENCODERS_PAD_A_RIGHT -# define ENCODERS_PAD_A_RIGHT ENCODERS_PAD_A -# endif -# define NUMBER_OF_ENCODERS ((sizeof((pin_t[])ENCODERS_PAD_A) + sizeof((pin_t[])ENCODERS_PAD_A_RIGHT)) / sizeof(pin_t)) +# define NUMBER_OF_ENCODERS (sizeof((pin_t[])ENCODERS_PAD_A) / sizeof(pin_t)) #endif // ENCODER_ENABLE #ifdef BACKLIGHT_ENABLE diff --git a/testlist.mk b/testlist.mk index d2bb571be6..904485c15c 100644 --- a/testlist.mk +++ b/testlist.mk @@ -2,7 +2,6 @@ TEST_LIST = $(sort $(patsubst %/test.mk,%, $(shell find $(ROOT_DIR)tests -type f FULL_TESTS := $(notdir $(TEST_LIST)) include $(QUANTUM_PATH)/debounce/tests/testlist.mk -include $(QUANTUM_PATH)/encoder/tests/testlist.mk include $(QUANTUM_PATH)/sequencer/tests/testlist.mk include $(PLATFORM_PATH)/test/testlist.mk From b3fc33faf79a0af332f4725693623112ecad86d1 Mon Sep 17 00:00:00 2001 From: Drashna Jaelre <drashna@live.com> Date: Sat, 27 Nov 2021 03:19:22 -0800 Subject: [PATCH 588/595] Re-add encoder tests (#15312) Co-authored-by: Balz Guenat <balz.guenat@gmail.com> --- build_test.mk | 1 + quantum/encoder/tests/encoder_tests.cpp | 144 ++++++++++++++++++ quantum/encoder/tests/encoder_tests_split.cpp | 143 +++++++++++++++++ quantum/encoder/tests/mock.c | 34 +++++ quantum/encoder/tests/mock.h | 40 +++++ quantum/encoder/tests/mock_split.c | 36 +++++ quantum/encoder/tests/mock_split.h | 48 ++++++ quantum/encoder/tests/rules.mk | 13 ++ quantum/encoder/tests/testlist.mk | 3 + 9 files changed, 462 insertions(+) create mode 100644 quantum/encoder/tests/encoder_tests.cpp create mode 100644 quantum/encoder/tests/encoder_tests_split.cpp create mode 100644 quantum/encoder/tests/mock.c create mode 100644 quantum/encoder/tests/mock.h create mode 100644 quantum/encoder/tests/mock_split.c create mode 100644 quantum/encoder/tests/mock_split.h create mode 100644 quantum/encoder/tests/rules.mk create mode 100644 quantum/encoder/tests/testlist.mk diff --git a/build_test.mk b/build_test.mk index a5d63adab4..136a0455f0 100644 --- a/build_test.mk +++ b/build_test.mk @@ -58,6 +58,7 @@ include $(BUILDDEFS_PATH)/generic_features.mk include $(PLATFORM_PATH)/common.mk include $(TMK_PATH)/protocol.mk include $(QUANTUM_PATH)/debounce/tests/rules.mk +include $(QUANTUM_PATH)/encoder/tests/rules.mk include $(QUANTUM_PATH)/sequencer/tests/rules.mk include $(PLATFORM_PATH)/test/rules.mk ifneq ($(filter $(FULL_TESTS),$(TEST)),) diff --git a/quantum/encoder/tests/encoder_tests.cpp b/quantum/encoder/tests/encoder_tests.cpp new file mode 100644 index 0000000000..1888fdab8d --- /dev/null +++ b/quantum/encoder/tests/encoder_tests.cpp @@ -0,0 +1,144 @@ +/* Copyright 2021 Balz Guenat + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "gtest/gtest.h" +#include "gmock/gmock.h" +#include <vector> +#include <algorithm> +#include <stdio.h> + +extern "C" { +#include "encoder.h" +#include "encoder/tests/mock.h" +} + +struct update { + int8_t index; + bool clockwise; +}; + +uint8_t uidx = 0; +update updates[32]; + +bool encoder_update_kb(uint8_t index, bool clockwise) { + updates[uidx % 32] = {index, clockwise}; + uidx++; + return true; +} + +bool setAndRead(pin_t pin, bool val) { + setPin(pin, val); + return encoder_read(); +} + +class EncoderTest : public ::testing::Test {}; + +TEST_F(EncoderTest, TestInit) { + uidx = 0; + encoder_init(); + EXPECT_EQ(pinIsInputHigh[0], true); + EXPECT_EQ(pinIsInputHigh[1], true); + EXPECT_EQ(uidx, 0); +} + +TEST_F(EncoderTest, TestOneClockwise) { + uidx = 0; + encoder_init(); + // send 4 pulses. with resolution 4, that's one step and we should get 1 update. + setAndRead(0, false); + setAndRead(1, false); + setAndRead(0, true); + setAndRead(1, true); + + EXPECT_EQ(uidx, 1); + EXPECT_EQ(updates[0].index, 0); + EXPECT_EQ(updates[0].clockwise, true); +} + +TEST_F(EncoderTest, TestOneCounterClockwise) { + uidx = 0; + encoder_init(); + setAndRead(1, false); + setAndRead(0, false); + setAndRead(1, true); + setAndRead(0, true); + + EXPECT_EQ(uidx, 1); + EXPECT_EQ(updates[0].index, 0); + EXPECT_EQ(updates[0].clockwise, false); +} + +TEST_F(EncoderTest, TestTwoClockwiseOneCC) { + uidx = 0; + encoder_init(); + setAndRead(0, false); + setAndRead(1, false); + setAndRead(0, true); + setAndRead(1, true); + setAndRead(0, false); + setAndRead(1, false); + setAndRead(0, true); + setAndRead(1, true); + setAndRead(1, false); + setAndRead(0, false); + setAndRead(1, true); + setAndRead(0, true); + + EXPECT_EQ(uidx, 3); + EXPECT_EQ(updates[0].index, 0); + EXPECT_EQ(updates[0].clockwise, true); + EXPECT_EQ(updates[1].index, 0); + EXPECT_EQ(updates[1].clockwise, true); + EXPECT_EQ(updates[2].index, 0); + EXPECT_EQ(updates[2].clockwise, false); +} + +TEST_F(EncoderTest, TestNoEarly) { + uidx = 0; + encoder_init(); + // send 3 pulses. with resolution 4, that's not enough for a step. + setAndRead(0, false); + setAndRead(1, false); + setAndRead(0, true); + EXPECT_EQ(uidx, 0); + // now send last pulse + setAndRead(1, true); + EXPECT_EQ(uidx, 1); + EXPECT_EQ(updates[0].index, 0); + EXPECT_EQ(updates[0].clockwise, true); +} + +TEST_F(EncoderTest, TestHalfway) { + uidx = 0; + encoder_init(); + // go halfway + setAndRead(0, false); + setAndRead(1, false); + EXPECT_EQ(uidx, 0); + // back off + setAndRead(1, true); + setAndRead(0, true); + EXPECT_EQ(uidx, 0); + // go all the way + setAndRead(0, false); + setAndRead(1, false); + setAndRead(0, true); + setAndRead(1, true); + // should result in 1 update + EXPECT_EQ(uidx, 1); + EXPECT_EQ(updates[0].index, 0); + EXPECT_EQ(updates[0].clockwise, true); +} diff --git a/quantum/encoder/tests/encoder_tests_split.cpp b/quantum/encoder/tests/encoder_tests_split.cpp new file mode 100644 index 0000000000..25e52c83f9 --- /dev/null +++ b/quantum/encoder/tests/encoder_tests_split.cpp @@ -0,0 +1,143 @@ +/* Copyright 2021 Balz Guenat + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "gtest/gtest.h" +#include "gmock/gmock.h" +#include <vector> +#include <algorithm> +#include <stdio.h> + +extern "C" { +#include "encoder.h" +#include "encoder/tests/mock_split.h" +} + +struct update { + int8_t index; + bool clockwise; +}; + +uint8_t uidx = 0; +update updates[32]; + +bool isLeftHand; + +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!isLeftHand) { + // this method has no effect on slave half + printf("ignoring update on right hand (%d,%s)\n", index, clockwise ? "CW" : "CC"); + return true; + } + updates[uidx % 32] = {index, clockwise}; + uidx++; + return true; +} + +bool setAndRead(pin_t pin, bool val) { + setPin(pin, val); + return encoder_read(); +} + +class EncoderTest : public ::testing::Test { + protected: + void SetUp() override { + uidx = 0; + for (int i = 0; i < 32; i++) { + pinIsInputHigh[i] = 0; + pins[i] = 0; + } + } +}; + +TEST_F(EncoderTest, TestInitLeft) { + isLeftHand = true; + encoder_init(); + EXPECT_EQ(pinIsInputHigh[0], true); + EXPECT_EQ(pinIsInputHigh[1], true); + EXPECT_EQ(pinIsInputHigh[2], false); + EXPECT_EQ(pinIsInputHigh[3], false); + EXPECT_EQ(uidx, 0); +} + +TEST_F(EncoderTest, TestInitRight) { + isLeftHand = false; + encoder_init(); + EXPECT_EQ(pinIsInputHigh[0], false); + EXPECT_EQ(pinIsInputHigh[1], false); + EXPECT_EQ(pinIsInputHigh[2], true); + EXPECT_EQ(pinIsInputHigh[3], true); + EXPECT_EQ(uidx, 0); +} + +TEST_F(EncoderTest, TestOneClockwiseLeft) { + isLeftHand = true; + encoder_init(); + // send 4 pulses. with resolution 4, that's one step and we should get 1 update. + setAndRead(0, false); + setAndRead(1, false); + setAndRead(0, true); + setAndRead(1, true); + + EXPECT_EQ(uidx, 1); + EXPECT_EQ(updates[0].index, 0); + EXPECT_EQ(updates[0].clockwise, true); +} + +TEST_F(EncoderTest, TestOneClockwiseRightSent) { + isLeftHand = false; + encoder_init(); + // send 4 pulses. with resolution 4, that's one step and we should get 1 update. + setAndRead(2, false); + setAndRead(3, false); + setAndRead(2, true); + setAndRead(3, true); + + uint8_t slave_state[2] = {0}; + encoder_state_raw(slave_state); + + EXPECT_EQ((int8_t)slave_state[0], -1); +} + +/* this test will not work after the previous test. + * this is due to encoder_value[1] already being set to -1 when simulating the right half. + * When we now receive this update acting as the left half, there is no change. + * This is hard to mock, as the static values inside encoder.c normally exist twice, once on each half, + * but here, they only exist once. + */ + +// TEST_F(EncoderTest, TestOneClockwiseRightReceived) { +// isLeftHand = true; +// encoder_init(); + +// uint8_t slave_state[2] = {255, 0}; +// encoder_update_raw(slave_state); + +// EXPECT_EQ(uidx, 1); +// EXPECT_EQ(updates[0].index, 1); +// EXPECT_EQ(updates[0].clockwise, true); +// } + +TEST_F(EncoderTest, TestOneCounterClockwiseRightReceived) { + isLeftHand = true; + encoder_init(); + + uint8_t slave_state[2] = {0, 0}; + encoder_update_raw(slave_state); + + EXPECT_EQ(uidx, 1); + EXPECT_EQ(updates[0].index, 1); + EXPECT_EQ(updates[0].clockwise, false); +} diff --git a/quantum/encoder/tests/mock.c b/quantum/encoder/tests/mock.c new file mode 100644 index 0000000000..d0506a938f --- /dev/null +++ b/quantum/encoder/tests/mock.c @@ -0,0 +1,34 @@ +/* Copyright 2021 Balz Guenat + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "mock.h" + +bool pins[32] = {0}; +bool pinIsInputHigh[32] = {0}; + +uint8_t mockSetPinInputHigh(pin_t pin) { + // dprintf("Setting pin %d input high.", pin); + pins[pin] = true; + pinIsInputHigh[pin] = true; + return 0; +} + +bool mockReadPin(pin_t pin) { return pins[pin]; } + +bool setPin(pin_t pin, bool val) { + pins[pin] = val; + return val; +} diff --git a/quantum/encoder/tests/mock.h b/quantum/encoder/tests/mock.h new file mode 100644 index 0000000000..dbc25a0846 --- /dev/null +++ b/quantum/encoder/tests/mock.h @@ -0,0 +1,40 @@ +/* Copyright 2021 Balz Guenat + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include <stdint.h> +#include <stdbool.h> + +/* Here, "pins" from 0 to 31 are allowed. */ +#define ENCODERS_PAD_A \ + { 0 } +#define ENCODERS_PAD_B \ + { 1 } + +typedef uint8_t pin_t; + +extern bool pins[]; +extern bool pinIsInputHigh[]; + +#define setPinInputHigh(pin) (mockSetPinInputHigh(pin)) +#define readPin(pin) (mockReadPin(pin)) + +uint8_t mockSetPinInputHigh(pin_t pin); + +bool mockReadPin(pin_t pin); + +bool setPin(pin_t pin, bool val); diff --git a/quantum/encoder/tests/mock_split.c b/quantum/encoder/tests/mock_split.c new file mode 100644 index 0000000000..68bf3af599 --- /dev/null +++ b/quantum/encoder/tests/mock_split.c @@ -0,0 +1,36 @@ +/* Copyright 2021 Balz Guenat + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include "mock_split.h" + +bool pins[32] = {0}; +bool pinIsInputHigh[32] = {0}; + +uint8_t mockSetPinInputHigh(pin_t pin) { + // dprintf("Setting pin %d input high.", pin); + pins[pin] = true; + pinIsInputHigh[pin] = true; + return 0; +} + +bool mockReadPin(pin_t pin) { return pins[pin]; } + +bool setPin(pin_t pin, bool val) { + pins[pin] = val; + return val; +} + +void last_encoder_activity_trigger(void) {} diff --git a/quantum/encoder/tests/mock_split.h b/quantum/encoder/tests/mock_split.h new file mode 100644 index 0000000000..0ae62652f9 --- /dev/null +++ b/quantum/encoder/tests/mock_split.h @@ -0,0 +1,48 @@ +/* Copyright 2021 Balz Guenat + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#pragma once + +#include <stdint.h> +#include <stdbool.h> + +#define SPLIT_KEYBOARD +/* Here, "pins" from 0 to 31 are allowed. */ +#define ENCODERS_PAD_A \ + { 0 } +#define ENCODERS_PAD_B \ + { 1 } +#define ENCODERS_PAD_A_RIGHT \ + { 2 } +#define ENCODERS_PAD_B_RIGHT \ + { 3 } + +typedef uint8_t pin_t; +extern bool isLeftHand; +void encoder_state_raw(uint8_t* slave_state); +void encoder_update_raw(uint8_t* slave_state); + +extern bool pins[]; +extern bool pinIsInputHigh[]; + +#define setPinInputHigh(pin) (mockSetPinInputHigh(pin)) +#define readPin(pin) (mockReadPin(pin)) + +uint8_t mockSetPinInputHigh(pin_t pin); + +bool mockReadPin(pin_t pin); + +bool setPin(pin_t pin, bool val); diff --git a/quantum/encoder/tests/rules.mk b/quantum/encoder/tests/rules.mk new file mode 100644 index 0000000000..b826ce3aed --- /dev/null +++ b/quantum/encoder/tests/rules.mk @@ -0,0 +1,13 @@ +encoder_DEFS := -DENCODER_MOCK_SINGLE + +encoder_SRC := \ + $(QUANTUM_PATH)/encoder/tests/mock.c \ + $(QUANTUM_PATH)/encoder/tests/encoder_tests.cpp \ + $(QUANTUM_PATH)/encoder.c + +encoder_split_DEFS := -DENCODER_MOCK_SPLIT + +encoder_split_SRC := \ + $(QUANTUM_PATH)/encoder/tests/mock_split.c \ + $(QUANTUM_PATH)/encoder/tests/encoder_tests_split.cpp \ + $(QUANTUM_PATH)/encoder.c diff --git a/quantum/encoder/tests/testlist.mk b/quantum/encoder/tests/testlist.mk new file mode 100644 index 0000000000..1be9f4a054 --- /dev/null +++ b/quantum/encoder/tests/testlist.mk @@ -0,0 +1,3 @@ +TEST_LIST += \ + encoder \ + encoder_split From 0e6548303d85103feb8620836f51bc4f506c743f Mon Sep 17 00:00:00 2001 From: Charly Delay <0xcharly@users.noreply.github.com> Date: Sun, 28 Nov 2021 00:23:02 +0900 Subject: [PATCH 589/595] [Keyboard] Fix call to `pointing_device_handle_buttons` (#15313) --- keyboards/ploopyco/trackball/trackball.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/keyboards/ploopyco/trackball/trackball.c b/keyboards/ploopyco/trackball/trackball.c index e2a6e4ed5c..da4bbf224e 100644 --- a/keyboards/ploopyco/trackball/trackball.c +++ b/keyboards/ploopyco/trackball/trackball.c @@ -158,7 +158,7 @@ bool process_record_kb(uint16_t keycode, keyrecord_t* record) { #ifndef MOUSEKEY_ENABLE if (IS_MOUSEKEY_BUTTON(keycode)) { report_mouse_t currentReport = pointing_device_get_report(); - currentReport.buttons = pointing_device_handle_buttons(record->event.pressed, keycode - KC_MS_BTN1); + currentReport.buttons = pointing_device_handle_buttons(currentReport.buttons, record->event.pressed, keycode - KC_MS_BTN1); pointing_device_set_report(currentReport); pointing_device_send(); } From e156d5c13b52be03d7b4db081b8000a7c93f7dfe Mon Sep 17 00:00:00 2001 From: Nick Brassel <nick@tzarc.org> Date: Sun, 28 Nov 2021 05:52:17 +1100 Subject: [PATCH 590/595] Fix build. (#15322) --- keyboards/tgr/jane/v2/{keymaps => }/config.h | 0 keyboards/tgr/jane/v2/{keymaps => }/info.json | 0 keyboards/tgr/jane/v2/{keymaps => }/readme.md | 0 keyboards/tgr/jane/v2/{keymaps => }/rules.mk | 0 keyboards/tgr/jane/v2/{keymaps/jane.c => v2.c} | 2 +- keyboards/tgr/jane/v2/{keymaps/jane.h => v2.h} | 0 6 files changed, 1 insertion(+), 1 deletion(-) rename keyboards/tgr/jane/v2/{keymaps => }/config.h (100%) rename keyboards/tgr/jane/v2/{keymaps => }/info.json (100%) rename keyboards/tgr/jane/v2/{keymaps => }/readme.md (100%) rename keyboards/tgr/jane/v2/{keymaps => }/rules.mk (100%) rename keyboards/tgr/jane/v2/{keymaps/jane.c => v2.c} (97%) rename keyboards/tgr/jane/v2/{keymaps/jane.h => v2.h} (100%) diff --git a/keyboards/tgr/jane/v2/keymaps/config.h b/keyboards/tgr/jane/v2/config.h similarity index 100% rename from keyboards/tgr/jane/v2/keymaps/config.h rename to keyboards/tgr/jane/v2/config.h diff --git a/keyboards/tgr/jane/v2/keymaps/info.json b/keyboards/tgr/jane/v2/info.json similarity index 100% rename from keyboards/tgr/jane/v2/keymaps/info.json rename to keyboards/tgr/jane/v2/info.json diff --git a/keyboards/tgr/jane/v2/keymaps/readme.md b/keyboards/tgr/jane/v2/readme.md similarity index 100% rename from keyboards/tgr/jane/v2/keymaps/readme.md rename to keyboards/tgr/jane/v2/readme.md diff --git a/keyboards/tgr/jane/v2/keymaps/rules.mk b/keyboards/tgr/jane/v2/rules.mk similarity index 100% rename from keyboards/tgr/jane/v2/keymaps/rules.mk rename to keyboards/tgr/jane/v2/rules.mk diff --git a/keyboards/tgr/jane/v2/keymaps/jane.c b/keyboards/tgr/jane/v2/v2.c similarity index 97% rename from keyboards/tgr/jane/v2/keymaps/jane.c rename to keyboards/tgr/jane/v2/v2.c index d4cdebaa25..3d98748516 100644 --- a/keyboards/tgr/jane/v2/keymaps/jane.c +++ b/keyboards/tgr/jane/v2/v2.c @@ -14,4 +14,4 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ -#include "jane.h" +#include "v2.h" diff --git a/keyboards/tgr/jane/v2/keymaps/jane.h b/keyboards/tgr/jane/v2/v2.h similarity index 100% rename from keyboards/tgr/jane/v2/keymaps/jane.h rename to keyboards/tgr/jane/v2/v2.h From ca5670762b27aba890fd4804ab303aea5e329895 Mon Sep 17 00:00:00 2001 From: Stefan Kerkmann <karlk90@pm.me> Date: Sat, 27 Nov 2021 19:54:51 +0100 Subject: [PATCH 591/595] Fix HOLD_ON_OTHER_KEY_PRESS after #11059 (#15307) that broke compilation because of a typo: KEYPRESS should have been KEY_PRESS --- quantum/action_tapping.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/quantum/action_tapping.c b/quantum/action_tapping.c index b64d8b710b..d2c93f85e3 100644 --- a/quantum/action_tapping.c +++ b/quantum/action_tapping.c @@ -113,7 +113,7 @@ void action_tapping_process(keyrecord_t record) { /* return true when key event is processed or consumed. */ bool process_tapping(keyrecord_t *keyp) { keyevent_t event = keyp->event; -# if (defined(AUTO_SHIFT_ENABLE) && defined(RETRO_SHIFT)) || defined(TAPPING_TERM_PER_KEY) || defined(PERMISSIVE_HOLD_PER_KEY) || defined(TAPPING_FORCE_HOLD_PER_KEY) || defined(HOLD_ON_OTHER_KEYPRESS_PER_KEY) +# if (defined(AUTO_SHIFT_ENABLE) && defined(RETRO_SHIFT)) || defined(TAPPING_TERM_PER_KEY) || defined(PERMISSIVE_HOLD_PER_KEY) || defined(TAPPING_FORCE_HOLD_PER_KEY) || defined(HOLD_ON_OTHER_KEY_PRESS_PER_KEY) uint16_t tapping_keycode = get_record_keycode(&tapping_key, false); # endif @@ -184,11 +184,11 @@ bool process_tapping(keyrecord_t *keyp) { ( ( false -# if defined(HOLD_ON_OTHER_KEYPRESS) || defined(HOLD_ON_OTHER_KEYPRESS_PER_KEY) +# if defined(HOLD_ON_OTHER_KEY_PRESS) || defined(HOLD_ON_OTHER_KEY_PRESS_PER_KEY) || ( IS_LT(tapping_keycode) -# ifdef HOLD_ON_OTHER_KEYPRESS_PER_KEY - && get_hold_on_other_keypress(tapping_keycode, keyp) +# ifdef HOLD_ON_OTHER_KEY_PRESS_PER_KEY + && get_hold_on_other_key_press(tapping_keycode, keyp) # endif ) # endif From 1e484035383862c11becd05aa15cd93acab289b3 Mon Sep 17 00:00:00 2001 From: Dasky <32983009+daskygit@users.noreply.github.com> Date: Sat, 27 Nov 2021 20:02:32 +0000 Subject: [PATCH 592/595] fix typos (#15316) --- keyboards/ploopyco/trackball_mini/readme.md | 4 ++-- keyboards/ploopyco/trackball_nano/readme.md | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/keyboards/ploopyco/trackball_mini/readme.md b/keyboards/ploopyco/trackball_mini/readme.md index 3c21a57cfd..a3aebb06e6 100644 --- a/keyboards/ploopyco/trackball_mini/readme.md +++ b/keyboards/ploopyco/trackball_mini/readme.md @@ -56,7 +56,7 @@ Additionally, you can change the DPI/CPI or speed of the trackball by calling `a To configure/set your own array, there are two defines to use, `PLOOPY_DPI_OPTIONS` to set the array, and `PLOOPY_DPI_DEFAULT`. ```c -#define PLOOPY_DPI_OPTIONS { CPI375, CPI750, CPI1375} +#define PLOOPY_DPI_OPTIONS { 375, 750, 1375} #define PLOOPY_DPI_DEFAULT 2 ``` @@ -73,7 +73,7 @@ Nothing needs to be enabled to use this functionality. Just add the `DRAG_SCROL ### Drag Scroll Configuration * `#define PLOOPY_DRAGSCROLL_MOMENTARY` - Makes the key into a momentary key, rather than a toggle. -* `#define PLOOPY_DRAGSCROLL_DPI CPI375` - When the fixed DPI option is enabled, this sets the DPI to be used for Drag Scroll. +* `#define PLOOPY_DRAGSCROLL_DPI 375` - When the fixed DPI option is enabled, this sets the DPI to be used for Drag Scroll. * `#define PLOOPY_DRAGSCROLL_INVERT` - This reverses the direction that the scroll is performed. ## Fuse settings diff --git a/keyboards/ploopyco/trackball_nano/readme.md b/keyboards/ploopyco/trackball_nano/readme.md index a82b3bc711..0d427bfb55 100644 --- a/keyboards/ploopyco/trackball_nano/readme.md +++ b/keyboards/ploopyco/trackball_nano/readme.md @@ -35,7 +35,7 @@ You can change the DPI/CPI or speed of the trackball by calling `adns_set_cpi` a To configure/set your own array, there are two defines to use, `PLOOPY_DPI_OPTIONS` to set the array, and `PLOOPY_DPI_DEFAULT`. ```c -#define PLOOPY_DPI_OPTIONS { CPI375, CPI750, CPI1375} +#define PLOOPY_DPI_OPTIONS { 375, 750, 1375} #define PLOOPY_DPI_DEFAULT 1 ``` From 88fe5c16a5cdca5e3cf13ef3cd91f5f1e4898c37 Mon Sep 17 00:00:00 2001 From: Nick Brassel <nick@tzarc.org> Date: Sun, 28 Nov 2021 10:41:48 +1100 Subject: [PATCH 593/595] Changelog 2021q4 (#15325) * Changelog. * Remove the asymmetric encoder PR from listing due to revert. * More docs * More docs * More docs * Links to changelog, updated schedule, slotted in 2 weeks of testing at the end so that there's no ambiguity with PR merge dates. * Clarify keyboard moves. * Fix dates * Sidebar * Fixup dates. * Fixup dates. * Wording. --- docs/ChangeLog/20211127.md | 457 ++++++++++++++++++ docs/_summary.md | 2 +- docs/breaking_changes.md | 32 +- docs/breaking_changes_history.md | 1 + docs/pr_checklist.md | 4 + .../qmk/cli/generate/develop_pr_list.py | 2 +- 6 files changed, 487 insertions(+), 11 deletions(-) create mode 100644 docs/ChangeLog/20211127.md diff --git a/docs/ChangeLog/20211127.md b/docs/ChangeLog/20211127.md new file mode 100644 index 0000000000..d954bb9f61 --- /dev/null +++ b/docs/ChangeLog/20211127.md @@ -0,0 +1,457 @@ +# QMK Breaking Changes - 2021 November 27 Changelog + +## 2000 keyboards! :id=qmk-2000th-keyboard + +QMK had it's 2000th keyboard submitted during this breaking changes cycle.... and it only _just_ made the cut-off! + +```shell +% qmk list-keyboards | wc -l +2003 +``` + +From the whole QMK team, a major thankyou to the community for embracing QMK as your preferred keyboard firmware! + +## Notable Features :id=notable-features + +### Expanded Pointing Device support ([#14343](https://github.com/qmk/qmk_firmware/pull/14343)) :id=expanded-pointing-device + +Pointing device support has been reworked and reimplemented to allow for easier integration of new peripherals. + +Usages of `POINTING_DEVICE_ENABLE = yes` in `rules.mk` files now need to be accompanied by a corresponding `POINTING_DEVICE_DRIVER = ???` line, specifying which driver to use during the build. Existing keyboards have already been migrated across to the new usage pattern, so most likely no change is required by users. + +QMK now has core-supplied support for the following pointing device peripherals: + +| `rules.mk` line | Supported device | +|------------------------------------------------|-----------------------------------------| +| `POINTING_DEVICE_DRIVER = analog_joystick` | Analog joysticks, such as PSP joysticks | +| `POINTING_DEVICE_DRIVER = adns5050` | ADNS 5050 sensor | +| `POINTING_DEVICE_DRIVER = adns9800` | ADNS 9800 laser sensor | +| `POINTING_DEVICE_DRIVER = cirque_pinnacle_i2c` | Cirque touchpad, I2C mode | +| `POINTING_DEVICE_DRIVER = cirque_pinnacle_spi` | Cirque Touchpad, SPI mode | +| `POINTING_DEVICE_DRIVER = pimoroni_trackball` | Pimoroni Trackball | +| `POINTING_DEVICE_DRIVER = pmw3360` | PMW 3360 | + +See the new documentation for the [Pointing Device](../feature_pointing_device.md) feature for more information on specific configuration for each driver. + +### Dynamic Tapping Term ([#11036](https://github.com/qmk/qmk_firmware/pull/11036)) :id=dynamic-tapping-term + +For people who are starting out with tapping keys, or for people who think tapping keys don't "feel right", it's sometimes quite difficult to determine what duration of tapping term to use to make things seem natural. + +If you're in this stage of discovery, you can now add `DYNAMIC_TAPPING_TERM_ENABLE = yes` to your `rules.mk`, which enables the use of the following keycodes in your keymap: + +| Key | Description | +|-----------|-------------------------------------------------------------------------------| +| `DT_PRNT` | "Dynamic Tapping Term Print": Types the current tapping term, in milliseconds | +| `DT_UP` | "Dynamic Tapping Term Up": Increases the current tapping term by 5ms | +| `DT_DOWN` | "Dynamic Tapping Term Down": Decreases the current tapping term by 5ms | + +Coupled with the use of `qmk console` or QMK Toolbox to show console output from your keyboard, you can tweak the tapping term dynamically in order to narrow down what "feels right" to you. Once you're happy, drop in the resulting number into your keymap's `config.h` and you're good to go! + +### Macros in JSON keymaps ([#14374](https://github.com/qmk/qmk_firmware/pull/14374)) :id=macros-in-keymap-json + +You can now define up to 32 macros in your `keymap.json` file, as used by [QMK Configurator](newbs_building_firmware_configurator.md), and `qmk compile`. You can define these macros in a list under the `macros` keyword, like this: + +```json +{ + "keyboard": "handwired/my_macropad", + "keymap": "my_keymap", + "macros": [ + [ // first listed is MACRO_0... + {"action":"down", "keycodes": ["LSFT"]}, + "hello world1", + {"action": "up","keycodes": ["LSFT"]} + ], + [ // ...then MACRO_1... + {"action":"tap", "keycodes": ["LCTL", "LALT", "DEL"]} + ], + [ // ...then MACRO_2... + "ding!", + {"action":"beep"} + ], + [ // ...and MACRO_3. + {"action":"tap", "keycodes": ["F1"]}, + {"action":"delay", "duration": "1000"}, + {"action":"tap", "keycodes": ["PGDN"]} + ] + ], + "layout": "LAYOUT_all", + "layers": [ + ["MACRO_0", "MACRO_1", "MACRO_2", "MACRO_3"] + ] +} +``` + +In due course, [QMK Configurator](https://config.qmk.fm/) will pick up support for defining these in its UI, but for now the json is the only way to define macros. + +## Changes Requiring User Action :id=changes-requiring-user-action + +### Updated Keyboard Codebases :id=updated-keyboard-codebases + +The following keyboards have had their source moved within QMK: + +| Old Keyboard Name | New Keyboard Name | +|------------------------|---------------------------------| +| aozora/hotswap | aozora | +| gskt00 | kapcave/gskt00 | +| handwired/dtisaac01 | dtisaac/dtisaac01 | +| kprepublic/bm60poker | kprepublic/bm60hsrgb_poker/rev1 | +| kprepublic/bm60rgb | kprepublic/bm60hsrgb/rev1 | +| kprepublic/bm60rgb_iso | kprepublic/bm60hsrgb_iso/rev1 | +| kprepublic/bm65iso | kprepublic/bm65hsrgb_iso | +| kprepublic/bm68rgb | kprepublic/bm68hsrgb | +| paladin64 | kapcave/paladin64 | +| portal_66 | portal_66/soldered | +| signum/3_0/elitec | signum/3_0 | +| tgr/jane | tgr/jane/v2 | + +### Squeezing space out of AVR ([#15243](https://github.com/qmk/qmk_firmware/pull/15243)) :id=squeezing-space-from-avr + +The AVR platform has been problematic for some time, in the sense that it is severely resource-constrained -- this makes life difficult for anyone attempting to add new functionality such as display panels to their keymap code. The illustrious Drashna has contributed some newer documentation on how to attempt to free up some space on AVR-based keyboards that are in short supply. + +Of course, there are much fewer constraints with ARM chips... ;) + +### Require explicit enabling of RGB Matrix modes ([#15018](https://github.com/qmk/qmk_firmware/pull/15018)) :id=explicit-rgb-modes + +Related to the previous section -- RGB Matrix modes have now been made to be opt-in, rather than opt-out. As these animations are now opt-in, you may find that your keyboard no longer has all the RGB modes you're expecting -- you may need to configure and recompile your firmware and enable your animations of choice... with any luck they'll still fit in the space available. + +Most keyboards keep their original functionality, but over time the QMK maintainers have found that removal of animations ends up being the quickest way to free up space... and some keyboards have had animations such as reactive effects disabled by default in order to still fit within the flash space available. + +The full list of configurables to turn specific animations back on can be found at on the [RGB Matrix documentation](feature_rgb_matrix.md#rgb-matrix-effects) page. + +### OLED task refactoring ([#14864](https://github.com/qmk/qmk_firmware/pull/14864)) :id=oled-task-refactor + +OLED display code was traditionally difficult to override in keymaps as they did not follow the standard pattern of `bool *_kb()` deferring to `bool *_user()` functions, allowing signalling to the higher level that processing had already been done. + +This changes the standard OLED drawing function model to allow for a base implementation to be provided by a keyboard, but also still allow for keymap-level overrides without needing to modify the keyboard's code. + +The old keymap code went something like this: + +```c +void oled_task_user(void) { + // keymap drawing code +} +``` + +...but the new keymap code looks like this: +```c +bool oled_task_user(void) { + // keymap drawing code + return false; +} +``` + +Keyboard designers should now structure their keyboard-level drawing routines like the following, in order to allow for keymap overrides: + +```c +bool oled_task_kb(void) { + // Defer to the keymap if they want to override + if(!oled_task_user()) { return false; } + + // default keyboard drawing code + return false; +} +``` + +### Bootmagic Full Removal ([#15002](https://github.com/qmk/qmk_firmware/pull/15002)) :id=bootmagic-full-removal + +As noted during previous breaking changes cycles, QMK decided to deprecate the full Bootmagic feature and leave Bootmagic Lite as the only remaining option. + +This removal is now complete! + +This pull request changes the behavior of `BOOTMAGIC_ENABLE` such that specifying `lite` or `full` results in an error, allowing only `yes` or `no`, with `yes` mirroring historical `lite` functionality. + +All use of the `lite` keyword within the repository has been migrated to `yes` -- any new submissions using `lite` will now fail to build and should be updated accordingly. + +#### Bootmagic Full Deprecation Schedule: Complete! + +This is the historical timeline for the behavior of `BOOTMAGIC_ENABLE`: + +- (done) From 2021 May 29, setting `BOOTMAGIC_ENABLE = yes` will enable Bootmagic Lite instead of full Bootmagic. +- (done) From 2021 Aug 28, `BOOTMAGIC_ENABLE` must be either `yes`, `lite`, or `no` – setting `BOOTMAGIC_ENABLE = full` will cause compilation to fail. +- (now) From 2021 Nov 27, `BOOTMAGIC_ENABLE` must be either `yes` or `no` – setting `BOOTMAGIC_ENABLE = lite` will cause compilation to fail. + +### Remove QWIIC_DRIVERS ([#14174](https://github.com/qmk/qmk_firmware/pull/14174)) :id=remove-qwiic + +Due to minimal QWIIC adoption and other options for similar functionality, the QWIIC drivers were removed from QMK. Existing OLED usages have been migrated across to the normal QMK OLED driver instead. + +## Notable core changes :id=notable-core + +### New MCU Support :id=new-mcu-support + +QMK firmware picked up support for a handful of new MCU families, potentially making it a bit easier to source components. + +QMK firmware is now no longer limited to AVR and ARM - it also picked up support for our first RISC-V chip, the GD32VF103. + +* Add support for RISC-V builds and GD32VF103 MCU ([#12508](https://github.com/qmk/qmk_firmware/pull/12508)) +* Add HT32 support to core ([#14388](https://github.com/qmk/qmk_firmware/pull/14388)) +* Westberrytech pr ([#14422](https://github.com/qmk/qmk_firmware/pull/14422)) +* Initial pass of F405 support ([#14584](https://github.com/qmk/qmk_firmware/pull/14584)) + +### EEPROM Changes :id=eeprom-changes + +There were a few EEPROM-related changes that landed during this breaking changes cycle, most prominently the long-awaited ability for the Drop boards to gain persistent storage. Any users of the Drop CTRL or Drop ALT should update QMK Toolbox as well -- coupled with a QMK firmware update settings should now be saved. + +* massdrop alt/ctrl: support saving into nvm ([#6068](https://github.com/qmk/qmk_firmware/pull/6068)) +* Implement F4 eeprom ([#14195](https://github.com/qmk/qmk_firmware/pull/14195)) +* make the full 4096 bytes of EEPROM work on Teensy 3.6 ([#12947](https://github.com/qmk/qmk_firmware/pull/12947)) +* Further tidy up of STM32 eeprom emulation ([#14591](https://github.com/qmk/qmk_firmware/pull/14591)) +* Enable eeprom with F401xE ld ([#14752](https://github.com/qmk/qmk_firmware/pull/14752)) + +### Compilation Database :id=compile-commands + +A clang-compatible compilation database generator has been added as an option in order to help development environments such as Visual Studio Code. + +Running `qmk generate-compilation-database -kb <yourkb> -km <yourkeymap>` from within the QMK firmware directory will generate a `compile_commands.json` file -- using a compatible IDE will likely see this and correctly start detecting the correct locations for source files as well as type and function information that are relevant to your build. + +Do note that switching keyboards will require re-generation of this file. + +* New CLI subcommand to create clang-compatible compilation database (`compile_commands.json`) ([#14370](https://github.com/qmk/qmk_firmware/pull/14370)) +* compiledb: query include paths from gcc directly. ([#14462](https://github.com/qmk/qmk_firmware/pull/14462)) + +### Codebase restructure and cleanup :id=codebase-restructure + +QMK continues on its restructuring journey, in order to make it easier to integrate newer features and add support for new hardware. This quarter's batch of changes include: + +* add 'include keyboard_features.mk' into build_keyboard.mk ([#8422](https://github.com/qmk/qmk_firmware/pull/8422)) +* Infer more when building features ([#13890](https://github.com/qmk/qmk_firmware/pull/13890)) +* Move `tmk_core/common/<plat>` ([#13918](https://github.com/qmk/qmk_firmware/pull/13918)) +* Move feature suspend logic out of platform specific code ([#14210](https://github.com/qmk/qmk_firmware/pull/14210)) +* Remove bin/qmk ([#14231](https://github.com/qmk/qmk_firmware/pull/14231)) +* Move Audio drivers from quantum to platform drivers folder ([#14308](https://github.com/qmk/qmk_firmware/pull/14308)) +* Remove Arduino-style `analogRead()` ([#14348](https://github.com/qmk/qmk_firmware/pull/14348)) +* Remove unreferenced IBM4704, Sony NEWS, NeXT keyboard code. ([#14380](https://github.com/qmk/qmk_firmware/pull/14380)) +* Move Bluetooth config to common_features.mk ([#14404](https://github.com/qmk/qmk_firmware/pull/14404)) +* Relocate Adafruit BLE code ([#14530](https://github.com/qmk/qmk_firmware/pull/14530)) +* Change `MK66F18` -> `MK66FX1M0` ([#14659](https://github.com/qmk/qmk_firmware/pull/14659)) +* Remove sysex API ([#14723](https://github.com/qmk/qmk_firmware/pull/14723)) +* Basic keycode overhaul ([#14726](https://github.com/qmk/qmk_firmware/pull/14726)) +* Remove SERIAL_LINK feature ([#14727](https://github.com/qmk/qmk_firmware/pull/14727)) +* Move converter specific tmk_core protocols ([#14743](https://github.com/qmk/qmk_firmware/pull/14743)) +* Align PS/2 GPIO defines ([#14745](https://github.com/qmk/qmk_firmware/pull/14745)) +* Clean up LED/RGB Matrix driver config ([#14760](https://github.com/qmk/qmk_firmware/pull/14760)) +* Update UART driver API ([#14839](https://github.com/qmk/qmk_firmware/pull/14839)) +* Tidy up LCD_ENABLE/visualizer references ([#14855](https://github.com/qmk/qmk_firmware/pull/14855)) +* Remove legacy Makefile functionality ([#14858](https://github.com/qmk/qmk_firmware/pull/14858)) +* Begin to carve out platform/protocol API - Migrate keyboard_* calls ([#14888](https://github.com/qmk/qmk_firmware/pull/14888)) +* Rename platform SRC variable ([#14894](https://github.com/qmk/qmk_firmware/pull/14894)) +* Relocate PS2 code ([#14895](https://github.com/qmk/qmk_firmware/pull/14895)) +* Move USE_CCACHE logic to common location ([#14899](https://github.com/qmk/qmk_firmware/pull/14899)) +* Migrate makefile utilities to sub-directory ([#14917](https://github.com/qmk/qmk_firmware/pull/14917)) +* Remove SERIAL_MOUSE ([#14969](https://github.com/qmk/qmk_firmware/pull/14969)) +* Relocate protocol files within tmk_core/common/ ([#14972](https://github.com/qmk/qmk_firmware/pull/14972)) +* More platform/protocol alignment ([#14976](https://github.com/qmk/qmk_firmware/pull/14976)) +* Fix uart function prototypes ([#15162](https://github.com/qmk/qmk_firmware/pull/15162)) +* Remove deprecated KEYMAP alias ([#15037](https://github.com/qmk/qmk_firmware/pull/15037)) +* Move non-assignment code to post_rules.mk ([#14207](https://github.com/qmk/qmk_firmware/pull/14207)) +* Helix use `post_rules.mk` ([#14216](https://github.com/qmk/qmk_firmware/pull/14216)) +* Make ChibiOS PAL interactions less STM32 specific - Round 2 ([#14456](https://github.com/qmk/qmk_firmware/pull/14456)) + +--- + +## Full changelist + +Core: +* massdrop alt/ctrl: support saving into nvm ([#6068](https://github.com/qmk/qmk_firmware/pull/6068)) +* Made AVR backlight pwm resolution configurable ([#7521](https://github.com/qmk/qmk_firmware/pull/7521)) +* add 'include keyboard_features.mk' into build_keyboard.mk ([#8422](https://github.com/qmk/qmk_firmware/pull/8422)) +* New feature: `DYNAMIC_TAPPING_TERM_ENABLE` ([#11036](https://github.com/qmk/qmk_firmware/pull/11036)) +* Add Retro Shift (Auto Shift for Tap Hold via Retro Tapping) and Custom Auto Shifts ([#11059](https://github.com/qmk/qmk_firmware/pull/11059)) +* Add support for RISC-V builds and GD32VF103 MCU ([#12508](https://github.com/qmk/qmk_firmware/pull/12508)) +* Add Fractal RGB matrix effects ([#12670](https://github.com/qmk/qmk_firmware/pull/12670)) +* Added power tracking api ([#12691](https://github.com/qmk/qmk_firmware/pull/12691)) +* haptic: Feature to disable it when usb port is not configured or suspended. ([#12692](https://github.com/qmk/qmk_firmware/pull/12692)) +* make the full 4096 bytes of EEPROM work on Teensy 3.6 ([#12947](https://github.com/qmk/qmk_firmware/pull/12947)) +* Add Support for USB programmable buttons ([#12950](https://github.com/qmk/qmk_firmware/pull/12950)) +* [Tests] Increase QMK test coverage ([#13789](https://github.com/qmk/qmk_firmware/pull/13789)) +* Add support for ISSI drivers on both sides of a split keyboard ([#13842](https://github.com/qmk/qmk_firmware/pull/13842)) +* Infer more when building features ([#13890](https://github.com/qmk/qmk_firmware/pull/13890)) +* Reimplements WPM feature to be smaller & precise ([#13902](https://github.com/qmk/qmk_firmware/pull/13902)) +* Move `tmk_core/common/<plat>` ([#13918](https://github.com/qmk/qmk_firmware/pull/13918)) +* Improvements to handling of disconnected split keyboards. ([#14033](https://github.com/qmk/qmk_firmware/pull/14033)) +* Add Pixel Rain RGB Matrix effect ([#14155](https://github.com/qmk/qmk_firmware/pull/14155)) +* Remove QWIIC_DRIVERS ([#14174](https://github.com/qmk/qmk_firmware/pull/14174)) +* Add LM() keys to the list of keys disabled by NO_HAPTIC_MOD ([#14181](https://github.com/qmk/qmk_firmware/pull/14181)) +* Implement F4 eeprom ([#14195](https://github.com/qmk/qmk_firmware/pull/14195)) +* define to AUTO_SHIFT_DISABLED_AT_STARTUP ([#14201](https://github.com/qmk/qmk_firmware/pull/14201)) +* Move feature suspend logic out of platform specific code ([#14210](https://github.com/qmk/qmk_firmware/pull/14210)) +* Remove bin/qmk ([#14231](https://github.com/qmk/qmk_firmware/pull/14231)) +* Change keyboard level include guards to `pragma once` ([#14248](https://github.com/qmk/qmk_firmware/pull/14248)) +* i2c_master: Add support for reading/writing to 16-bit registers ([#14289](https://github.com/qmk/qmk_firmware/pull/14289)) +* Move Audio drivers from quantum to platform drivers folder ([#14308](https://github.com/qmk/qmk_firmware/pull/14308)) +* Add RGBW support to PWM and SPI drivers for ChibiOS ([#14327](https://github.com/qmk/qmk_firmware/pull/14327)) +* Rework and expand Pointing Device support ([#14343](https://github.com/qmk/qmk_firmware/pull/14343)) +* Remove Arduino-style `analogRead()` ([#14348](https://github.com/qmk/qmk_firmware/pull/14348)) +* Macros in JSON keymaps ([#14374](https://github.com/qmk/qmk_firmware/pull/14374)) +* Remove unreferenced IBM4704, Sony NEWS, NeXT keyboard code. ([#14380](https://github.com/qmk/qmk_firmware/pull/14380)) +* Add HT32 support to core ([#14388](https://github.com/qmk/qmk_firmware/pull/14388)) +* Align ChibiOS I2C defs with other drivers ([#14399](https://github.com/qmk/qmk_firmware/pull/14399)) +* Move Bluetooth config to common_features.mk ([#14404](https://github.com/qmk/qmk_firmware/pull/14404)) +* Westberrytech pr ([#14422](https://github.com/qmk/qmk_firmware/pull/14422)) +* Refactor use of STM32_SYSCLK ([#14430](https://github.com/qmk/qmk_firmware/pull/14430)) +* Migrate STM32_EEPROM_ENABLE to use EEPROM_DRIVER ([#14433](https://github.com/qmk/qmk_firmware/pull/14433)) +* Refactor use of _STM32_ defines ([#14439](https://github.com/qmk/qmk_firmware/pull/14439)) +* Add i2c defaults for Convert to Proton C ([#14470](https://github.com/qmk/qmk_firmware/pull/14470)) +* Use opendrain pin with external pullup again ([#14474](https://github.com/qmk/qmk_firmware/pull/14474)) +* Add ability to use numpad digits for unicode mode UC_WIN ([#14496](https://github.com/qmk/qmk_firmware/pull/14496)) +* Enable de-ghosting for RGB/LED matrix on all ISSI LED drivers ([#14508](https://github.com/qmk/qmk_firmware/pull/14508)) +* Relocate Adafruit BLE code ([#14530](https://github.com/qmk/qmk_firmware/pull/14530)) +* Initial pass of F405 support ([#14584](https://github.com/qmk/qmk_firmware/pull/14584)) +* Further tidy up of STM32 eeprom emulation ([#14591](https://github.com/qmk/qmk_firmware/pull/14591)) +* Remove GCC version check from song list inclusion ([#14600](https://github.com/qmk/qmk_firmware/pull/14600)) +* Change `MK66F18` -> `MK66FX1M0` ([#14659](https://github.com/qmk/qmk_firmware/pull/14659)) +* Add ifndef to WS2812 timing constraints ([#14678](https://github.com/qmk/qmk_firmware/pull/14678)) +* Reuse of EEPROM debounce logic ([#14699](https://github.com/qmk/qmk_firmware/pull/14699)) +* Remove sysex API ([#14723](https://github.com/qmk/qmk_firmware/pull/14723)) +* Basic keycode overhaul ([#14726](https://github.com/qmk/qmk_firmware/pull/14726)) +* Remove SERIAL_LINK feature ([#14727](https://github.com/qmk/qmk_firmware/pull/14727)) +* Enable CLI flashing via mdloader ([#14729](https://github.com/qmk/qmk_firmware/pull/14729)) +* Correct the Turkish F '?' keycode (TR_QUES) ([#14740](https://github.com/qmk/qmk_firmware/pull/14740)) +* Move converter specific tmk_core protocols ([#14743](https://github.com/qmk/qmk_firmware/pull/14743)) +* Align PS/2 GPIO defines ([#14745](https://github.com/qmk/qmk_firmware/pull/14745)) +* Improve Adafruit BLE configuration defines ([#14749](https://github.com/qmk/qmk_firmware/pull/14749)) +* Enable eeprom with F401xE ld ([#14752](https://github.com/qmk/qmk_firmware/pull/14752)) +* Clean up LED/RGB Matrix driver config ([#14760](https://github.com/qmk/qmk_firmware/pull/14760)) +* Initial USB2422 driver ([#14835](https://github.com/qmk/qmk_firmware/pull/14835)) +* Update UART driver API ([#14839](https://github.com/qmk/qmk_firmware/pull/14839)) +* Split out arm_atsam shift register logic ([#14848](https://github.com/qmk/qmk_firmware/pull/14848)) +* Split out HAPTIC_ENABLE to have separate DRIVER option ([#14854](https://github.com/qmk/qmk_firmware/pull/14854)) +* Tidy up LCD_ENABLE/visualizer references ([#14855](https://github.com/qmk/qmk_firmware/pull/14855)) +* Remove legacy Makefile functionality ([#14858](https://github.com/qmk/qmk_firmware/pull/14858)) +* Add support for deferred executors. ([#14859](https://github.com/qmk/qmk_firmware/pull/14859)) +* Change OLED task function to be boolean ([#14864](https://github.com/qmk/qmk_firmware/pull/14864)) +* Add a new led driver for Keychron's keyboards. ([#14872](https://github.com/qmk/qmk_firmware/pull/14872)) +* Begin to carve out platform/protocol API - Migrate keyboard_* calls ([#14888](https://github.com/qmk/qmk_firmware/pull/14888)) +* Rename platform SRC variable ([#14894](https://github.com/qmk/qmk_firmware/pull/14894)) +* Relocate PS2 code ([#14895](https://github.com/qmk/qmk_firmware/pull/14895)) +* Move USE_CCACHE logic to common location ([#14899](https://github.com/qmk/qmk_firmware/pull/14899)) +* Migrate makefile utilities to sub-directory ([#14917](https://github.com/qmk/qmk_firmware/pull/14917)) +* Remove legacy handling for ErgoDox Infinity handedness ([#14919](https://github.com/qmk/qmk_firmware/pull/14919)) +* Align usbasp flashing behaviour ([#14928](https://github.com/qmk/qmk_firmware/pull/14928)) +* Optimize matrix scanning by removing variable shifts ([#14947](https://github.com/qmk/qmk_firmware/pull/14947)) +* Stop-gap forward-port Drop LED features for CTRL and ALT ([#14967](https://github.com/qmk/qmk_firmware/pull/14967)) +* Remove SERIAL_MOUSE ([#14969](https://github.com/qmk/qmk_firmware/pull/14969)) +* Relocate protocol files within tmk_core/common/ ([#14972](https://github.com/qmk/qmk_firmware/pull/14972)) +* Move LTO logic from common.mk ([#14973](https://github.com/qmk/qmk_firmware/pull/14973)) +* More platform/protocol alignment ([#14976](https://github.com/qmk/qmk_firmware/pull/14976)) +* Add support to persist MD LED framework settings ([#14980](https://github.com/qmk/qmk_firmware/pull/14980)) +* Enable configuration of PWM frequency for IS31FL3733B ([#14983](https://github.com/qmk/qmk_firmware/pull/14983)) +* Remove `BOOTMAGIC_ENABLE = lite` option ([#15002](https://github.com/qmk/qmk_firmware/pull/15002)) +* Manually format develop ([#15003](https://github.com/qmk/qmk_firmware/pull/15003)) +* Require explicit enabling of RGB Matrix modes ([#15018](https://github.com/qmk/qmk_firmware/pull/15018)) +* Remove deprecated KEYMAP alias ([#15037](https://github.com/qmk/qmk_firmware/pull/15037)) +* Fix uart function prototypes ([#15162](https://github.com/qmk/qmk_firmware/pull/15162)) +* Rename RGB fractal ([#15174](https://github.com/qmk/qmk_firmware/pull/15174)) +* Format code according to conventions ([#15195](https://github.com/qmk/qmk_firmware/pull/15195)) +* Format code according to conventions ([#15196](https://github.com/qmk/qmk_firmware/pull/15196)) +* Add uint to char functions ([#15244](https://github.com/qmk/qmk_firmware/pull/15244)) +* [Tests] Increase QMK test coverage take 2 ([#15269](https://github.com/qmk/qmk_firmware/pull/15269)) +* Tidy up adjustable ws2812 timing ([#15299](https://github.com/qmk/qmk_firmware/pull/15299)) +* Add script for performing compilation size regression investigations. ([#15303](https://github.com/qmk/qmk_firmware/pull/15303)) +* WB32F3G71 config migration with removal of unnecessary items. ([#15309](https://github.com/qmk/qmk_firmware/pull/15309)) +* Re-add encoder tests ([#15312](https://github.com/qmk/qmk_firmware/pull/15312)) + +CLI: +* Add check for non-assignment code in rules.mk ([#12108](https://github.com/qmk/qmk_firmware/pull/12108)) +* Export list of `develop` PRs to be merged into `master` ([#13944](https://github.com/qmk/qmk_firmware/pull/13944)) +* remove qmk console, which is now part of the global cli ([#14206](https://github.com/qmk/qmk_firmware/pull/14206)) +* New CLI subcommand to create clang-compatible compilation database (`compile_commands.json`) ([#14370](https://github.com/qmk/qmk_firmware/pull/14370)) +* compiledb: query include paths from gcc directly. ([#14462](https://github.com/qmk/qmk_firmware/pull/14462)) + +Submodule updates: +* Update to ChibiOS 20.3.4, support builds against trunk ([#14208](https://github.com/qmk/qmk_firmware/pull/14208)) +* Update ChibiOS-Contrib ([#14408](https://github.com/qmk/qmk_firmware/pull/14408)) +* Update ChibiOS-Contrib ([#14419](https://github.com/qmk/qmk_firmware/pull/14419)) +* Purge uGFX. ([#14720](https://github.com/qmk/qmk_firmware/pull/14720)) + +Keyboards: +* Add support for PaladinPad, Arya pcb and move keyboards by KapCave into their own directory ([#14194](https://github.com/qmk/qmk_firmware/pull/14194)) +* Move non-assignment code to post_rules.mk ([#14207](https://github.com/qmk/qmk_firmware/pull/14207)) +* Helix use `post_rules.mk` ([#14216](https://github.com/qmk/qmk_firmware/pull/14216)) +* handwired/symmetric70_proto use post_rules.mk ([#14235](https://github.com/qmk/qmk_firmware/pull/14235)) +* Add Adelais PCB. Adelais RGB rev.3, Adelais rev. 4 APM32F103, Adelais AVR rev. 1 ([#14252](https://github.com/qmk/qmk_firmware/pull/14252)) +* GMMK Pro keymap ([#14389](https://github.com/qmk/qmk_firmware/pull/14389)) +* Migrate boston_meetup/2019 away from QWIIC_DRIVERS ([#14413](https://github.com/qmk/qmk_firmware/pull/14413)) +* Migrate hadron away from QWIIC_DRIVERS ([#14415](https://github.com/qmk/qmk_firmware/pull/14415)) +* Enable Proton C defaults for SplitKB Kyria ([#14490](https://github.com/qmk/qmk_firmware/pull/14490)) +* Set USB max power consumption of kint* controllers to 100mA ([#14546](https://github.com/qmk/qmk_firmware/pull/14546)) +* Remove complex `fn_actions` macros ([#14662](https://github.com/qmk/qmk_firmware/pull/14662)) +* New Keyboard: TGR Jane CE ([#14713](https://github.com/qmk/qmk_firmware/pull/14713)) +* Migrate satisfaction75 away from QWIIC_DRIVERS ([#14747](https://github.com/qmk/qmk_firmware/pull/14747)) +* add Lefty keyboard ([#14898](https://github.com/qmk/qmk_firmware/pull/14898)) +* overnumpad controller: Add support for turning off solenoid enable in low power. ([#15021](https://github.com/qmk/qmk_firmware/pull/15021)) +* Reduce compile size for melgeek mach80 ([#15034](https://github.com/qmk/qmk_firmware/pull/15034)) +* Update updated KPrepublic boards to be prepared for the update ([#15040](https://github.com/qmk/qmk_firmware/pull/15040)) +* rename kprepublic bm keyboards to have a standardized naming format ([#15047](https://github.com/qmk/qmk_firmware/pull/15047)) +* matrix/abelx - Update ChibiOS conf files ([#15130](https://github.com/qmk/qmk_firmware/pull/15130)) +* Disable console on Keebio foldkb and iris rev3 ([#15260](https://github.com/qmk/qmk_firmware/pull/15260)) +* Disable console on Sofle default keymap ([#15261](https://github.com/qmk/qmk_firmware/pull/15261)) +* Disable features on SplitKB boards to fit under size ([#15262](https://github.com/qmk/qmk_firmware/pull/15262)) +* Enable LTO on viktus/sp_mini via keymap ([#15263](https://github.com/qmk/qmk_firmware/pull/15263)) + +Keyboard fixes: +* Fix number of elements in info.json does not match errors ([#14213](https://github.com/qmk/qmk_firmware/pull/14213)) +* Fix typos from 14248 ([#14261](https://github.com/qmk/qmk_firmware/pull/14261)) +* Stream cheap via fixes/updates ([#14325](https://github.com/qmk/qmk_firmware/pull/14325)) +* Map `PRODUCT` define to `keyboard_name` ([#14372](https://github.com/qmk/qmk_firmware/pull/14372)) +* Fix BT rules for dosa40rgb ([#14497](https://github.com/qmk/qmk_firmware/pull/14497)) +* Fix typo in mechloving adelais header files ([#14590](https://github.com/qmk/qmk_firmware/pull/14590)) +* Fix for mechlovin/adelais/standard_led/arm/rev4 ([#14639](https://github.com/qmk/qmk_firmware/pull/14639)) +* Fix OLED timeout on recent qwiic migrations ([#14775](https://github.com/qmk/qmk_firmware/pull/14775)) +* Fix OLED timeout on satisfaction75 after migration from QWIIC ([#14780](https://github.com/qmk/qmk_firmware/pull/14780)) +* Fix Compile issues for lefty ([#14982](https://github.com/qmk/qmk_firmware/pull/14982)) +* Fix missing return for oled task on Lefty ([#15010](https://github.com/qmk/qmk_firmware/pull/15010)) +* Fix missing return for oled task on Arabica37 ([#15011](https://github.com/qmk/qmk_firmware/pull/15011)) +* Fix missing return for oled task in drashna userspace ([#15012](https://github.com/qmk/qmk_firmware/pull/15012)) +* Fix size issues on pistachio pro via keymap ([#15017](https://github.com/qmk/qmk_firmware/pull/15017)) +* Fix keycode collision in craftwalk keymap ([#15055](https://github.com/qmk/qmk_firmware/pull/15055)) +* Fix compilation issues for yanghu Unicorne ([#15068](https://github.com/qmk/qmk_firmware/pull/15068)) +* Fixup broken build after #15040 ([#15073](https://github.com/qmk/qmk_firmware/pull/15073)) +* Fix compilation issues for Lime ([#15116](https://github.com/qmk/qmk_firmware/pull/15116)) +* Fix additional board sizes for RGB Matrix ([#15170](https://github.com/qmk/qmk_firmware/pull/15170)) +* Fix bandominedoni via keymap compilation ([#15171](https://github.com/qmk/qmk_firmware/pull/15171)) +* Fix handful of boards compiling too large due to RGB matrix changes ([#15184](https://github.com/qmk/qmk_firmware/pull/15184)) +* Fix oled_task_user for ffkeebs/puca ([#15185](https://github.com/qmk/qmk_firmware/pull/15185)) +* More headroom. ([#15301](https://github.com/qmk/qmk_firmware/pull/15301)) +* More headroom. ([#15302](https://github.com/qmk/qmk_firmware/pull/15302)) + +Others: +* Clean up some code block languages ([#14434](https://github.com/qmk/qmk_firmware/pull/14434)) +* Clarify "nested" and "rolling" key sequences ([#14655](https://github.com/qmk/qmk_firmware/pull/14655)) +* CI: Create GitHub Actions unit test workflow ([#15223](https://github.com/qmk/qmk_firmware/pull/15223)) +* Squeezing space out of AVR ([#15243](https://github.com/qmk/qmk_firmware/pull/15243)) + +Bugs: +* Fix parallel builds w/ LTO on systems where make is not GNU make. ([#13955](https://github.com/qmk/qmk_firmware/pull/13955)) +* fix automatic directory for qmk lint ([#14215](https://github.com/qmk/qmk_firmware/pull/14215)) +* RN42 Bluetooth typo fix ([#14421](https://github.com/qmk/qmk_firmware/pull/14421)) +* fix typo in backlight code from #14439 ([#14442](https://github.com/qmk/qmk_firmware/pull/14442)) +* fix compilation issues with USB programmable buttons ([#14454](https://github.com/qmk/qmk_firmware/pull/14454)) +* Fix descriptor for USB Programmable Buttons ([#14455](https://github.com/qmk/qmk_firmware/pull/14455)) +* Make ChibiOS PAL interactions less STM32 specific - Round 2 ([#14456](https://github.com/qmk/qmk_firmware/pull/14456)) +* fix logical minimum in Programmable Button rdesc ([#14464](https://github.com/qmk/qmk_firmware/pull/14464)) +* Fix i2c_readReg16 ([#14730](https://github.com/qmk/qmk_firmware/pull/14730)) +* Put back eeconfig_update_ functions ([#14751](https://github.com/qmk/qmk_firmware/pull/14751)) +* Fix misplaced endif in led_matrix_drivers.c ([#14785](https://github.com/qmk/qmk_firmware/pull/14785)) +* Fix builds for ChibiOS + Cortex-M0[+] ([#14879](https://github.com/qmk/qmk_firmware/pull/14879)) +* Fix ccache default ([#14906](https://github.com/qmk/qmk_firmware/pull/14906)) +* Fix issues with Oneshot disabling ([#14934](https://github.com/qmk/qmk_firmware/pull/14934)) +* Fix develop after recent changes ([#14975](https://github.com/qmk/qmk_firmware/pull/14975)) +* Fix up issues shown by clang-format of vusb ([#15004](https://github.com/qmk/qmk_firmware/pull/15004)) +* Fix unterminated ifdef in ISSI 3733 driver ([#15014](https://github.com/qmk/qmk_firmware/pull/15014)) +* Fix build failures caused by #12947. ([#15019](https://github.com/qmk/qmk_firmware/pull/15019)) +* Fixup LED matrix. ([#15020](https://github.com/qmk/qmk_firmware/pull/15020)) +* Revert to old init order for host driver ([#15029](https://github.com/qmk/qmk_firmware/pull/15029)) +* Fixup #15029 ([#15031](https://github.com/qmk/qmk_firmware/pull/15031)) +* RISC-V toolchain and picolibc fixes ([#15109](https://github.com/qmk/qmk_firmware/pull/15109)) +* gcc10 LTO - Only specify adhlns assembler options at link time ([#15115](https://github.com/qmk/qmk_firmware/pull/15115)) +* Add needed include to pointing_device.c ([#15167](https://github.com/qmk/qmk_firmware/pull/15167)) +* Fix missing variable for Backlight Breathing ([#15199](https://github.com/qmk/qmk_firmware/pull/15199)) +* Revert backlight pins on function call ([#15205](https://github.com/qmk/qmk_firmware/pull/15205)) +* Fix timer include in override_wiring.c ([#15221](https://github.com/qmk/qmk_firmware/pull/15221)) +* fix broken macro in transport.h ([#15239](https://github.com/qmk/qmk_firmware/pull/15239)) +* Short term bodge for PRODUCT warning ([#15240](https://github.com/qmk/qmk_firmware/pull/15240)) +* Remove use of __flash due to LTO issues ([#15268](https://github.com/qmk/qmk_firmware/pull/15268)) +* Documentation typo fix ([#15298](https://github.com/qmk/qmk_firmware/pull/15298)) +* [Core] Hotfix for HOLD_ON_OTHER_KEY_PRESS after #11059 ([#15307](https://github.com/qmk/qmk_firmware/pull/15307)) +* Fix call to pointing_device_handle_buttons ([#15313](https://github.com/qmk/qmk_firmware/pull/15313)) +* [Develop] Fix ploopy readme typos ([#15316](https://github.com/qmk/qmk_firmware/pull/15316)) diff --git a/docs/_summary.md b/docs/_summary.md index 18841819eb..e26d9ae210 100644 --- a/docs/_summary.md +++ b/docs/_summary.md @@ -129,7 +129,7 @@ * Breaking Changes * [Overview](breaking_changes.md) * [My Pull Request Was Flagged](breaking_changes_instructions.md) - * [Most Recent ChangeLog](ChangeLog/20210529.md "QMK v0.13.0 - 2021 May 29") + * [Most Recent ChangeLog](ChangeLog/20211127.md "QMK v0.15.0 - 2021 Nov 27") * [Past Breaking Changes](breaking_changes_history.md) * C Development diff --git a/docs/breaking_changes.md b/docs/breaking_changes.md index c5f4eec04d..333c128ccb 100644 --- a/docs/breaking_changes.md +++ b/docs/breaking_changes.md @@ -2,10 +2,13 @@ This document describes QMK's Breaking Change process. A Breaking Change is any change which modifies how QMK behaves in a way that in incompatible or potentially dangerous. We limit these changes so that users can have confidence that updating their QMK tree will not break their keymaps. +This also includes any keyboard moves within the repository. + The breaking change period is when we will merge PR's that change QMK in dangerous or unexpected ways. There is a built-in period of testing so we are confident that any problems caused are rare or unable to be predicted. ## What has been included in past Breaking Changes? +* [2021 Nov 27](ChangeLog/20211127.md) * [2021 Aug 28](ChangeLog/20210828.md) * [2021 May 29](ChangeLog/20210529.md) * [2021 Feb 27](ChangeLog/20210227.md) @@ -17,16 +20,17 @@ The breaking change period is when we will merge PR's that change QMK in dangero ## When is the next Breaking Change? -The next Breaking Change is scheduled for August 28, 2021. +The next Breaking Change is scheduled for February 26, 2022. ### Important Dates -* [x] 2021 Aug 29 - `develop` is created. Each push to `master` is subsequently merged to `develop` -* [ ] 2021 Oct 31 - `develop` closed to new PR's. -* [ ] 2021 Oct 31 - Call for testers. -* [ ] 2021 Nov 26 - `master` is locked, no PR's merged. -* [ ] 2021 Nov 28 - Merge `develop` to `master`. -* [ ] 2021 Nov 28 - `master` is unlocked. PR's can be merged again. +* [x] 2022 Nov 27 - `develop` is tagged with a new release version. Each push to `master` is subsequently merged to `develop` by GitHub actions. +* [ ] 2022 Jan 31 - `develop` closed to new PR's. +* [ ] 2022 Jan 31 - Call for testers. +* [ ] 2022 Feb 12 - Last day for merges -- after this point `develop` is locked for testing and accepts only bugfixes +* [ ] 2022 Feb 24 - `master` is locked, no PR's merged. +* [ ] 2022 Feb 26 - Merge `develop` to `master`. +* [ ] 2022 Feb 26 - `master` is unlocked. PR's can be merged again. ## What changes will be included? @@ -36,8 +40,10 @@ If you want your breaking change to be included in this round you need to create Criteria for acceptance: -* PR is complete and ready to merge -* PR has a ChangeLog +* The PR is complete and ready to merge +* The PR has a ChangeLog file describing the changes under `<qmk_firmware>/docs/Changelog/20220226`. + * This should be in Markdown format, with a name in the format `PR12345.md`, substituting the digits for your PR's ID. + * One strong recommendation that the ChangeLog document matches the PR description on GitHub, so as to ensure traceability. # Checklists @@ -68,6 +74,14 @@ This happens immediately after the previous `develop` branch is merged. * [ ] GitHub PR * [ ] https://reddit.com/r/olkb +## 2 Weeks Before Merge + +* `develop` is now closed to existing PR merges, only bugfixes for previous merges may be included +* Post call for testers + * [ ] Discord + * [ ] GitHub PR + * [ ] https://reddit.com/r/olkb + ## 1 Week Before Merge * Announce that master will be closed from <2 Days Before> to <Day of Merge> diff --git a/docs/breaking_changes_history.md b/docs/breaking_changes_history.md index f78e97f1c7..6b1b71b1fd 100644 --- a/docs/breaking_changes_history.md +++ b/docs/breaking_changes_history.md @@ -2,6 +2,7 @@ This page links to all previous changelogs from the QMK Breaking Changes process. +* [2021 Nov 27](ChangeLog/20211127.md) - version 0.15.0 * [2021 Aug 28](ChangeLog/20210828.md) - version 0.14.0 * [2021 May 29](ChangeLog/20210529.md) - version 0.13.0 * [2021 Feb 27](ChangeLog/20210227.md) - version 0.12.0 diff --git a/docs/pr_checklist.md b/docs/pr_checklist.md index 2a2b0f1e76..25f3d7662e 100644 --- a/docs/pr_checklist.md +++ b/docs/pr_checklist.md @@ -118,6 +118,10 @@ Also, specific to ChibiOS: ## Core PRs - must now target `develop` branch, which will subsequently be merged back to `master` on the breaking changes timeline +- any support for new hardware now requires a corresponding test board under `keyboards/handwired/onekey` + - for new MCUs, a new "child" keyboard should be added that targets your newly-added MCU, so that builds can be verified + - for new hardware support such as display panels, core-side matrix implementations, or other peripherals, an associated keymap should be provided + - if an existing keymap exists that can leverage this functionality this may not be required (e.g. a new RGB driver chip, supported by the `rgb` keymap) -- consult with the QMK Collaborators on Discord to determine if there is sufficient overlap already - other requirements are at the discretion of QMK collaborators - core is a lot more subjective given the breadth of posted changes diff --git a/lib/python/qmk/cli/generate/develop_pr_list.py b/lib/python/qmk/cli/generate/develop_pr_list.py index de4eaa7d88..07e46752a6 100755 --- a/lib/python/qmk/cli/generate/develop_pr_list.py +++ b/lib/python/qmk/cli/generate/develop_pr_list.py @@ -110,10 +110,10 @@ def generate_develop_pr_list(cli): pr_num = commit['pr_num'] print(f'* {title} ([#{pr_num}](https://github.com/qmk/qmk_firmware/pull/{pr_num}))') - _dump_commit_list("Bugs", pr_list_bugs) _dump_commit_list("Core", pr_list_core) _dump_commit_list("CLI", pr_list_cli) _dump_commit_list("Submodule updates", pr_list_dependencies) _dump_commit_list("Keyboards", pr_list_keyboards) _dump_commit_list("Keyboard fixes", pr_list_keyboard_fixes) _dump_commit_list("Others", pr_list_others) + _dump_commit_list("Bugs", pr_list_bugs) From 51db8baf77e2c0aa5f54d73114e84a33306d7380 Mon Sep 17 00:00:00 2001 From: Nick Brassel <nick@tzarc.org> Date: Sun, 28 Nov 2021 11:16:20 +1100 Subject: [PATCH 594/595] Start `develop` for 2022q1. --- readme.md | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/readme.md b/readme.md index 5649ddfa09..63b483c744 100644 --- a/readme.md +++ b/readme.md @@ -1,3 +1,7 @@ +# This is the `develop` branch! + +See the [Breaking Changes](https://docs.qmk.fm/#/breaking_changes) document for more information. + # Quantum Mechanical Keyboard Firmware [![Current Version](https://img.shields.io/github/tag/qmk/qmk_firmware.svg)](https://github.com/qmk/qmk_firmware/tags) From eaf17b32601f28e0e40f8a9ff0e081fa91d15c53 Mon Sep 17 00:00:00 2001 From: Xelus22 <17491233+Xelus22@users.noreply.github.com> Date: Sun, 28 Nov 2021 12:12:04 +1100 Subject: [PATCH 595/595] [Bug] Xelus Keyboards 400kHz i2c fix (#15315) * 400khz fix * fix valor rev2 timing * keep consistent --- keyboards/xelus/pachi/rgb/rev1/config.h | 6 +++--- keyboards/xelus/pachi/rgb/rev2/config.h | 6 +++--- keyboards/xelus/valor/rev2/config.h | 6 +++--- 3 files changed, 9 insertions(+), 9 deletions(-) diff --git a/keyboards/xelus/pachi/rgb/rev1/config.h b/keyboards/xelus/pachi/rgb/rev1/config.h index 276a128e0c..66aab54276 100644 --- a/keyboards/xelus/pachi/rgb/rev1/config.h +++ b/keyboards/xelus/pachi/rgb/rev1/config.h @@ -50,10 +50,10 @@ #define I2C1_SCL_PAL_MODE 4 #define I2C1_SDA_PAL_MODE 4 #define I2C1_TIMINGR_PRESC 0U -#define I2C1_TIMINGR_SCLDEL 11U +#define I2C1_TIMINGR_SCLDEL 7U #define I2C1_TIMINGR_SDADEL 0U -#define I2C1_TIMINGR_SCLH 14U -#define I2C1_TIMINGR_SCLL 42U +#define I2C1_TIMINGR_SCLH 45U +#define I2C1_TIMINGR_SCLL 149U // I2C EEPROM #define EEPROM_I2C_24LC64 diff --git a/keyboards/xelus/pachi/rgb/rev2/config.h b/keyboards/xelus/pachi/rgb/rev2/config.h index f66afcfb79..46f22acb58 100644 --- a/keyboards/xelus/pachi/rgb/rev2/config.h +++ b/keyboards/xelus/pachi/rgb/rev2/config.h @@ -50,10 +50,10 @@ #define I2C1_SCL_PAL_MODE 4 #define I2C1_SDA_PAL_MODE 4 #define I2C1_TIMINGR_PRESC 0U -#define I2C1_TIMINGR_SCLDEL 11U +#define I2C1_TIMINGR_SCLDEL 7U #define I2C1_TIMINGR_SDADEL 0U -#define I2C1_TIMINGR_SCLH 14U -#define I2C1_TIMINGR_SCLL 42U +#define I2C1_TIMINGR_SCLH 45U +#define I2C1_TIMINGR_SCLL 149U // I2C EEPROM #define EEPROM_I2C_24LC64 diff --git a/keyboards/xelus/valor/rev2/config.h b/keyboards/xelus/valor/rev2/config.h index 5956914c8a..8201373d23 100644 --- a/keyboards/xelus/valor/rev2/config.h +++ b/keyboards/xelus/valor/rev2/config.h @@ -52,10 +52,10 @@ #define I2C1_SCL_PAL_MODE 4 #define I2C1_SDA_PAL_MODE 4 #define I2C1_TIMINGR_PRESC 0U -#define I2C1_TIMINGR_SCLDEL 11U +#define I2C1_TIMINGR_SCLDEL 7U #define I2C1_TIMINGR_SDADEL 0U -#define I2C1_TIMINGR_SCLH 14U -#define I2C1_TIMINGR_SCLL 42U +#define I2C1_TIMINGR_SCLH 45U +#define I2C1_TIMINGR_SCLL 149U // I2C EEPROM #define EEPROM_I2C_24LC64